{
  "model_key": "claude_fable_52",
  "display_name": "Claude Fable 5.2",
  "provider": "anthropic",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "Claude Fable 5.2 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (anthropic/claude-fable-5.2) at maximum reasoning effort. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Claude Fable 5.2 on 2026-11-10 ($8.00 input, $0.20 cached input, $40.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 140,
          "incorrect_count": 10,
          "partial_credit_count": 10,
          "zero_count": 0,
          "mean_score_0_to_4": 3.8333333333333335,
          "score_percent": 95.83333333333334,
          "score_distribution": {
            "1": 6,
            "2": 3,
            "3": 1,
            "4": 140
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 140,
          "incorrect_count": 10,
          "partial_credit_count": 10,
          "zero_count": 0,
          "mean_score_0_to_4": 3.8333333333333335,
          "score_percent": 95.83333333333334,
          "score_distribution": {
            "1": 6,
            "2": 3,
            "3": 1,
            "4": 140
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 90,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 90
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 90,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 90
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 50,
          "incorrect_count": 10,
          "partial_credit_count": 10,
          "zero_count": 0,
          "mean_score_0_to_4": 3.5833333333333335,
          "score_percent": 89.58333333333334,
          "score_distribution": {
            "1": 6,
            "2": 3,
            "3": 1,
            "4": 50
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 50,
          "incorrect_count": 10,
          "partial_credit_count": 10,
          "zero_count": 0,
          "mean_score_0_to_4": 3.5833333333333335,
          "score_percent": 89.58333333333334,
          "score_distribution": {
            "1": 6,
            "2": 3,
            "3": 1,
            "4": 50
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 46,
        "incorrect_count": 4,
        "partial_credit_count": 4,
        "zero_count": 0,
        "mean_score_0_to_4": 3.8,
        "score_percent": 95.0,
        "score_distribution": {
          "1": 2,
          "2": 2,
          "4": 46
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 47,
        "incorrect_count": 3,
        "partial_credit_count": 3,
        "zero_count": 0,
        "mean_score_0_to_4": 3.84,
        "score_percent": 96.0,
        "score_distribution": {
          "1": 2,
          "2": 1,
          "4": 47
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 47,
        "incorrect_count": 3,
        "partial_credit_count": 3,
        "zero_count": 0,
        "mean_score_0_to_4": 3.86,
        "score_percent": 96.5,
        "score_distribution": {
          "1": 2,
          "3": 1,
          "4": 47
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 0,
        "input_tokens": 293850,
        "output_tokens": 1212534,
        "total_tokens": 1506384
      },
      "known_totals": {
        "cached_input_tokens": 0,
        "input_tokens": 293850,
        "output_tokens": 1212534,
        "total_tokens": 1506384
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 30,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 30
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 30,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 30
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 30,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 30
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 16,
          "incorrect_count": 4,
          "partial_credit_count": 4,
          "zero_count": 0,
          "mean_score_0_to_4": 3.5,
          "score_percent": 87.5,
          "score_distribution": {
            "1": 2,
            "2": 2,
            "4": 16
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 17,
          "incorrect_count": 3,
          "partial_credit_count": 3,
          "zero_count": 0,
          "mean_score_0_to_4": 3.6,
          "score_percent": 90.0,
          "score_distribution": {
            "1": 2,
            "2": 1,
            "4": 17
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 17,
          "incorrect_count": 3,
          "partial_credit_count": 3,
          "zero_count": 0,
          "mean_score_0_to_4": 3.65,
          "score_percent": 91.25,
          "score_distribution": {
            "1": 2,
            "3": 1,
            "4": 17
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The intrinsic gain approximately doubles**, assuming the same bias (same drain current or overdrive voltage) and the long-channel square-law model.\n\nIntrinsic gain is $A_0 = g_m r_o$, so consider each factor:\n\n- **Transconductance is unchanged.** Since $g_m = \\sqrt{2\\mu C_{ox}(W/L)\\,I_D}$ and doubling both W and L leaves $W/L$ the same, $g_m$ stays the same at the same bias.\n\n- **Output resistance doubles.** Since $r_o \\approx \\dfrac{1}{\\lambda I_D}$ and the channel-length modulation coefficient scales as $\\lambda \\propto 1/L$, doubling L halves $\\lambda$ and doubles $r_o$.\n\nTherefore:\n\n$$A_0 = g_m r_o = \\frac{2}{\\lambda V_{ov}} \\;\\rightarrow\\; 2\\times \\text{ the original value}$$\n\n**Caveats:**\n\n- In real short-channel devices the increase is not exactly 2×, because effects like DIBL also depend on L.\n- The gain comes at the cost of speed. Gate area and thus gate capacitance go up about 4× while $g_m$ is unchanged, so the transit frequency $f_T \\approx g_m / (2\\pi C_{gs})$ drops by roughly 4×.",
        "format": "markdown",
        "sha256": "46bda4efd8b99d00180438d6fe6b179e66616eb43d95c920348e4ac0f3d28570"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions preserves W/L and, at the stated bias, leaves gm and drain current approximately unchanged, while the longer channel roughly doubles ro. The resulting intrinsic gain approximately doubles; the added caveats do not undermine the answer.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 1024,
        "total_tokens": 1060,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 1024,
        "total_tokens": 1060,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The intrinsic gain approximately doubles**, assuming the bias (drain current or overdrive voltage) is unchanged.\n\nThe intrinsic gain is A₀ = gₘ·rₒ.\n\n- **gₘ is unchanged.** In saturation, gₘ = √(2μCₒₓ(W/L)·I_D). Doubling both W and L leaves W/L the same, so at the same bias current, gₘ and V_ov stay the same.\n\n- **rₒ doubles.** rₒ = 1/(λI_D), and the channel-length modulation coefficient λ is inversely proportional to L. Doubling L halves λ, so rₒ doubles.\n\nEquivalently, A₀ = 2/(λV_ov) = 2V_A′L/V_ov, which is proportional to L at fixed overdrive.\n\n**Caveats:**\n- This follows from the long-channel square-law model. In short-channel devices the gain still rises with L, but not exactly linearly.\n- The gate area and gate capacitance (C_gs ∝ WL) increase by 4×, so the transit frequency f_T ≈ gₘ/(2πC_gs) drops by about 4×. You trade speed and area for gain.",
        "format": "markdown",
        "sha256": "dad3df56a0ae4eba377e4f2a0d31b2eaaf2f26d764d8a33e50c5c7d59da41fff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with W/L and bias unchanged, gm and drain current remain about constant while ro doubles as channel-length modulation decreases. The added speed and area caveats do not undermine the answer.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 1044,
        "total_tokens": 1080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 643,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 1044,
        "total_tokens": 1080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 643,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The intrinsic gain roughly doubles**, assuming the same bias current and the long-channel square-law model.\n\nThe intrinsic gain is $A_0 = g_m r_o$, so look at each factor:\n\n- **Transconductance:** $g_m = \\sqrt{2\\mu C_{ox}\\frac{W}{L} I_D}$. Doubling both W and L leaves W/L unchanged, so at the same $I_D$ the overdrive voltage and $g_m$ stay the same.\n\n- **Output resistance:** $r_o \\approx \\frac{1}{\\lambda I_D} = \\frac{V_A}{I_D}$. Channel-length modulation weakens as the channel gets longer ($\\lambda \\propto 1/L$, or equivalently $V_A = V_A' L$), so doubling L doubles $r_o$.\n\nCombining the two:\n\n$$A_0 = g_m r_o = \\frac{2V_A}{V_{ov}} = \\frac{2V_A' L}{V_{ov}}$$\n\nWith $V_{ov}$ unchanged and L doubled, $A_0$ doubles.\n\n**Caveats:**\n\n- Gate area (W·L) quadruples, so $C_{gs}$ goes up about 4× while $g_m$ is unchanged, and the transit frequency $f_T \\approx g_m / (2\\pi C_{gs})$ drops by about 4×. You trade speed and area for gain.\n- In real short-channel devices, $r_o$ does not scale exactly linearly with L (because of effects such as DIBL and pocket implants), so the factor of two is only a first-order estimate.",
        "format": "markdown",
        "sha256": "4ecea51f5ea0d5ec42a7914da8a409d1cdf507b062560aa8633db38a1fdbb3de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes intrinsic gain roughly doubles: with W/L and bias current unchanged, gm stays approximately constant, while the longer channel increases ro approximately twofold. The stated assumptions and caveats are appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 1122,
        "total_tokens": 1158,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 586,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 1122,
        "total_tokens": 1158,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 586,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both can be correct. It depends on what is held constant as the overdrive changes.**\n\nFor a square-law MOSFET in saturation, with overdrive V_ov = V_GS − V_TH, the transconductance can be written three equivalent ways:\n\n1. g_m = μC_ox (W/L) V_ov\n2. g_m = 2I_D / V_ov\n3. g_m = √(2μC_ox (W/L) I_D)\n\n**Student A is right if the device size (W/L) is fixed.** From (1), g_m is proportional to V_ov. Raising V_GS on a given transistor increases the current (I_D ∝ V_ov²), and g_m rises linearly with it.\n\n**Student B is right if the bias current I_D is fixed.** From (2), g_m is inversely proportional to V_ov. To raise V_ov at the same current, you must shrink W/L, and the smaller device gives less g_m. This is why designers use a low overdrive when they want high g_m per unit of current (g_m/I_D = 2/V_ov).\n\nThe statement \"g_m goes up (or down) with overdrive\" is therefore incomplete, because I_D, W/L, and V_ov are linked by I_D = ½μC_ox(W/L)V_ov². Only two of the three are independent, so you must say which one is held fixed.\n\n**Caveats for real devices:**\n- In short-channel devices at high overdrive, velocity saturation and mobility degradation make g_m level off (approaching roughly W·C_ox·v_sat) or even fall, even at fixed W/L.\n- In weak inversion (subthreshold), g_m ≈ I_D/(nV_T), which sets an upper limit on g_m/I_D, so expression (2) does not grow without bound as V_ov → 0.",
        "format": "markdown",
        "sha256": "90bba3db3eb21e2256befc930c7c8bb4c29be091730f54003746245c21d74eaa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size and explains that current rises with overdrive. It also correctly states the fixed-current condition under which Student B is right; the extra caveats do not undermine the essential answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 54,
        "output_tokens": 891,
        "total_tokens": 945,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 54,
        "output_tokens": 891,
        "total_tokens": 945,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both can be right, because the question doesn't say what is held constant.**\n\nFor a MOSFET in saturation (square-law model), the transconductance can be written three equivalent ways:\n\n1. **g_m = μC_ox (W/L) V_ov**\n2. **g_m = 2I_D / V_ov**\n3. **g_m = √(2 μC_ox (W/L) I_D)**\n\n**Student A is right if the device size (W/L) is fixed.** Raising V_ov by increasing V_GS on a given transistor makes I_D grow as V_ov², and g_m rises linearly with V_ov (equation 1).\n\n**Student B is right if the bias current I_D is fixed.** If a current source sets I_D, the only way to get a larger V_ov is to use a smaller W/L, and g_m falls as 1/V_ov (equation 2).\n\nThe two views are consistent: V_ov, I_D, and W/L are linked by I_D = ½ μC_ox (W/L) V_ov², so you can only fix one while varying V_ov, and the trend in g_m depends on which one you fix.\n\nIf I had to pick the more common case, a student who simply sweeps V_GS on a given transistor will see Student A's result. In circuit design with a fixed current budget, Student B's view is the more useful one: a low V_ov gives more g_m per unit current, which is why g_m/I_D = 2/V_ov is a common design metric.\n\nOne caveat is that the square-law model breaks down at the extremes. At high V_ov, velocity saturation and mobility degradation make g_m level off, even at fixed W/L. At very low V_ov (subthreshold), g_m/I_D saturates at 1/(nV_T) rather than increasing without bound.",
        "format": "markdown",
        "sha256": "02cf47f2a2548638cebcc18eec7959b668907ff794836493be2343c2134fdf18"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed W/L and explains that current rises with overdrive; it also correctly describes Student B’s fixed-current condition. The extra model caveats do not undermine the answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 54,
        "output_tokens": 958,
        "total_tokens": 1012,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 54,
        "output_tokens": 958,
        "total_tokens": 1012,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both can be correct. It depends on what is held constant as the overdrive voltage changes.**\n\nFor a square-law MOSFET in saturation, the transconductance can be written in three equivalent ways:\n\n$$g_m = \\mu C_{ox}\\frac{W}{L}V_{ov} \\qquad g_m = \\frac{2I_D}{V_{ov}} \\qquad g_m = \\sqrt{2\\mu C_{ox}\\frac{W}{L}I_D}$$\n\nwhere $V_{ov} = V_{GS} - V_{TH}$.\n\n**Student A is right if W/L is fixed.** If you take a given transistor and raise $V_{GS}$, then $g_m = \\mu C_{ox}(W/L)V_{ov}$ increases linearly with overdrive. The drain current is not constant here; it grows as $V_{ov}^2$.\n\n**Student B is right if the drain current is fixed.** If the bias current is set, for example by a current source, then $g_m = 2I_D/V_{ov}$ decreases as overdrive increases. To raise $V_{ov}$ at the same current, you must use a smaller W/L, and the smaller device gives less transconductance.\n\nThere is no contradiction, because $I_D = \\tfrac{1}{2}\\mu C_{ox}(W/L)V_{ov}^2$ links the three variables $I_D$, $W/L$, and $V_{ov}$. Only two of them are independent, so asking how $g_m$ changes with $V_{ov}$ has no answer until you say which of the other two is held fixed.\n\n**Limits of the square-law model:**\n- At high overdrive in short-channel devices, velocity saturation and mobility degradation make $g_m$ level off rather than keep rising for a fixed device.\n- At very low overdrive (subthreshold), $g_m = 2I_D/V_{ov}$ does not go to infinity. Instead, $g_m/I_D$ saturates at about $1/(nV_T)$.",
        "format": "markdown",
        "sha256": "cf0dee6bb6042bfb732bbdc4c560c3fe63423a52c1d791998f5026ef8d42b40d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed transistor size, explains the rising current and gm, and notes Student B’s fixed-current condition. The model caveats do not undermine the answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 54,
        "output_tokens": 1162,
        "total_tokens": 1216,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 506,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 54,
        "output_tokens": 1162,
        "total_tokens": 1216,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 506,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** The small-signal model of a PMOS transistor has the same topology and the same polarities as that of an NMOS: a controlled current source g_m·v_gs pointing from drain to source, r_o between drain and source, plus g_mb·v_bs and the same capacitances if you include them. No sign changes are needed.\n\n**Why the signs work out**\n\nThe small-signal model describes changes around the bias point, not the absolute polarities. For a PMOS in saturation, with I_D defined as flowing into the drain (same convention as NMOS):\n\nI_D = −½ μ_p C_ox (W/L)(V_GS − V_TH)²\n\nDifferentiating:\n\n∂I_D/∂V_GS = −μ_p C_ox (W/L)(V_GS − V_TH)\n\nFor a PMOS that is on, V_GS − V_TH is negative, so this derivative is positive, just as for an NMOS. Physically, raising the gate voltage makes V_GS less negative, so the device conducts less current out of the drain. That is equivalent to an increase in current into the drain, which is the same behavior as an NMOS.\n\n**Common sources of confusion**\n\n- **Drawing orientation:** PMOS devices are usually drawn with the source on top (connected to V_DD), so the model may appear upside-down. It is still the same circuit between the same terminals.\n- **Alternate notation:** Some texts write the source as g_m·v_sg pointing from source to drain. This flips both the control voltage and the current direction, so it is the same model.\n\n**What does differ**\n\nThe parameter values differ, not the model:\n\n- g_m = √(2 μ_p C_ox (W/L)|I_D|) = 2|I_D|/|V_ov|. Since μ_p < μ_n, a PMOS has lower g_m than an NMOS of the same size and current.\n- r_o ≈ 1/(λ|I_D|), where λ generally differs from the NMOS value.\n- The body is the n-well, usually tied to V_DD or to the source, which affects whether the g_mb term matters.",
        "format": "markdown",
        "sha256": "f9e9fb36d58517547f3d29184d03838b004b4d09dd9020c1ddc68c3a261c9fab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model. Its signs are consistent with source-referenced voltages and current defined into the drain; parameter differences do not change the model structure.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 1519,
        "total_tokens": 1554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 845,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 1519,
        "total_tokens": 1554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 845,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** The small-signal model of a PMOS transistor has the same topology as that of an NMOS transistor, including the direction of the dependent current source. Only the parameter values differ.\n\n**Why:** The small-signal model describes incremental changes around a bias point, not the bias quantities themselves. The reversed polarities of a PMOS device (negative V_GS, V_DS, V_TH, and current flowing from source to drain) affect the bias point only.\n\n**Check with the equations:** Define I_D as the current flowing into the drain, as for an NMOS. For a PMOS in saturation:\n\nI_D = −½ μp Cox (W/L)(V_GS − V_TH)²,  with V_GS − V_TH < 0\n\nThen\n\ng_m = ∂I_D/∂V_GS = −μp Cox (W/L)(V_GS − V_TH) = μp Cox (W/L)|V_GS − V_TH| > 0\n\nSo i_d = g_m·v_gs, with the current source pointing from drain to source, exactly as in the NMOS model.\n\n**Intuitive check:** If the gate voltage of a PMOS rises by a small amount, |V_GS| decreases, so the source-to-drain current decreases. A decrease in source-to-drain current is the same as an increase in drain-to-source current. This is what a current source g_m·v_gs pointing from drain to source predicts.\n\nThe same reasoning applies to the other elements:\n- r_o appears between drain and source.\n- The body-effect source g_mb·v_bs points from drain to source.\n- The capacitances (C_gs, C_gd, C_sb, C_db) appear in the same places.\n\n**Caveats:**\n- **Parameter values differ.** Hole mobility is lower than electron mobility, so a PMOS has a lower g_m for the same W/L and bias current. λ (and hence r_o) and the capacitances also differ.\n- **The drawing may look different.** In circuits the PMOS source is usually at the top (toward V_DD), so the model is often drawn upside down. Some textbooks label the source as g_m·v_sg pointing from source to drain, which is electrically the same thing.\n\nA common mistake is to flip the current source for a PMOS while still controlling it with v_gs, which introduces a sign error.",
        "format": "markdown",
        "sha256": "cb42004b20f31a246c5b4e5c8d2ba6b9d84993776c8e07935728893cf7a33e04"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer correctly states that the PMOS small-signal model has the same form as the NMOS model. The golden solution explicitly awards full credit for that conclusion; the polarity discussion is supplementary.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 1651,
        "total_tokens": 1686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 1651,
        "total_tokens": 1686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** The small-signal model of a PMOS transistor is the same as that of an NMOS transistor: a controlled current source g_m·v_gs flowing from drain to source, r_o between drain and source, a body-effect source g_mb·v_bs, and the same capacitances. No polarities or current directions need to be flipped.\n\n**Why:** The small-signal model describes incremental changes around the bias point, not the absolute DC polarities. For a PMOS in saturation,\n\nI_SD = ½ μ_p C_ox (W/L)(V_SG − |V_TP|)²\n\nIf the gate voltage rises by a small amount (v_gs > 0), V_SG decreases, so the source-to-drain current decreases. A decrease in current flowing out of the drain is the same as an increase in current flowing into the drain. So\n\ni_d (into drain) = ∂I_D/∂V_GS · v_gs = +g_m·v_gs\n\nwhich is the same relation as for an NMOS. The same argument applies to r_o and g_mb.\n\n**Caveats:**\n\n- **Parameter values differ.** The topology is the same, but μ_p < μ_n, so a PMOS has lower g_m for the same W/L and bias current. λ (hence r_o), γ, and the capacitances also differ.\n- **Orientation in the circuit.** A PMOS source usually connects to the higher potential (for example V_DD, which is AC ground), so the model often appears upside down when placed in the circuit. It is still the same model.\n- **Equivalent alternative.** Some people draw the PMOS source as g_m·v_sg flowing from source to drain. This is the same thing, since the two sign reversals cancel. A common mistake is to flip only one of them.\n- **Body terminal.** The PMOS body is the n-well, which can often be tied to the source. That makes v_bs = 0 and removes the g_mb source, but this is a matter of how the device is connected, not a difference in the model.",
        "format": "markdown",
        "sha256": "421cc1edcd7ca685950cee8a30c8958cef7a9e0207fd1eb731131441e2789e41"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The essential answer is correct: a PMOS has the same small-signal model form as an NMOS when voltage and current conventions are used consistently. The golden solution explicitly grants full credit for this conclusion; parameter and polarity nuances do not change it.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 1396,
        "total_tokens": 1431,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 1396,
        "total_tokens": 1431,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Setup:** M₁ is a diode-connected NMOS: its gate is tied to its drain and its source is grounded. Therefore\n\n- V_GS = V_DS = V_X\n- I_X = I_D, since no current flows into the gate.\n\n**Regions of operation**\n\n1. **0 ≤ V_X < V_TH:** V_GS < V_TH, so M₁ is off and I_X = 0.\n\n2. **V_X ≥ V_TH:** M₁ is on. Because V_DS = V_GS > V_GS − V_TH always holds, the device is in saturation and can never enter the triode region:\n\n I_X = ½ μₙC_ox (W/L)(V_X − V_TH)²\n\n If channel-length modulation is included, multiply by (1 + λV_X), which makes the curve slightly steeper.\n\n**Sketch**\n\n```\n I_X\n  ▲\n  │                                  •\n  │                                •\n  │                              •      I_X = ½ μnCox (W/L)(V_X − V_TH)²\n  │                            •\n  │                         •\n  │                      •\n  │                 •\n  │   I_X = 0   •\n  └━━━━━━━━━━•─────────────────────────► V_X\n  0         V_TH\n```\n\nThe curve is flat at zero up to V_X = V_TH, then rises as a parabola with its vertex at V_TH. The slope at V_TH is zero and grows afterward as dI_X/dV_X = μₙC_ox(W/L)(V_X − V_TH) = g_m.\n\nThe only change in region is from cutoff to saturation at V_X = V_TH; the two-terminal device behaves like a \"square-law diode.\"",
        "format": "markdown",
        "sha256": "257a09b2f246de292a8476e63459024916bd192af70a5cbdff67c76cc9ac64c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its cutoff below threshold and saturation above threshold, and the resulting quadratic rise in current. The optional channel-length-modulation note is also acceptable.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1306,
        "output_tokens": 1432,
        "total_tokens": 2738,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 883,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1306,
        "output_tokens": 1432,
        "total_tokens": 2738,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 883,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**M1 is a diode-connected NMOS** (gate tied to drain, source grounded), so\n\n$$V_{GS}=V_{DS}=V_X$$\n\n**Region 1: $V_X < V_{TH}$.** The transistor is off, so $I_X = 0$. This also holds for negative $V_X$: the source and drain exchange roles, the gate is then tied to the effective source, $V_{GS}=0$, and the device stays off (neglecting the drain-bulk junction diode).\n\n**Region 2: $V_X \\ge V_{TH}$.** The transistor is on, and because $V_{DS}=V_{GS} > V_{GS}-V_{TH}$, it is always in saturation, never in triode:\n\n$$I_X=\\frac{1}{2}\\mu_nC_{ox}\\frac{W}{L}\\,(V_X-V_{TH})^2$$\n\nWith channel-length modulation, this is multiplied by $(1+\\lambda V_X)$.\n\n**Sketch:**\n\n```\n I_X\n  |                              .\n  |                             .\n  |                            .\n  |                          .      I_X = ½ μnCox (W/L)(V_X − V_TH)²\n  |                        .\n  |                     .\n  |                 . ˙\n  |____________..˙_________________________ V_X\n  0           V_TH\n     I_X = 0\n```\n\nThe curve is zero up to $V_X = V_{TH}$, then rises as a parabola with zero slope at $V_{TH}$.",
        "format": "markdown",
        "sha256": "c62202c2e6d56e398a13be224f565011624f0ff00d3a18e2b38b61593d9e9b1b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold and a quadratic rise above it, with saturation reasoning. The optional channel-length modulation and negative-voltage discussion do not detract.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1306,
        "output_tokens": 1370,
        "total_tokens": 2676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1306,
        "output_tokens": 1370,
        "total_tokens": 2676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** M1 is a diode-connected NMOS, so I_X is zero until V_X reaches the threshold V_TH and then rises as a parabola.\n\n**Analysis**\n\nThe gate is tied to the drain and the source is grounded, so\n\nV_GS = V_DS = V_X\n\n- **V_X < V_TH:** the transistor is off, so I_X = 0.\n- **V_X ≥ V_TH:** the transistor is on. Because V_DS = V_GS > V_GS − V_TH, it is always in saturation (never in triode), so\n\n I_X = ½ μₙC_ox (W/L)(V_X − V_TH)²\n\n If channel-length modulation is included, multiply by (1 + λV_X).\n\n**Sketch**\n\n```\n I_X\n  │                                  •\n  │                                 •\n  │                               •\n  │                             •      I_X = ½ μnCox (W/L)(V_X − V_TH)²\n  │                          •\n  │                      •\n  │                 •\n  │━━━━━━━━━━━━•\n  └────────────┬──────────────────────────► V_X\n  0           V_TH\n     (off)          (saturation)\n```\n\n**Key features**\n\n- I_X = 0 for 0 ≤ V_X ≤ V_TH.\n- At V_X = V_TH the curve leaves the axis with zero slope.\n- Beyond V_TH the curve is a parabola whose slope, dI_X/dV_X = μₙC_ox (W/L)(V_X − V_TH) = g_m, increases linearly with V_X.\n\nThe device behaves like a two-terminal \"diode\" with a square-law characteristic rather than an exponential one.",
        "format": "markdown",
        "sha256": "60b0a76051bed6a2fa4081187d0afebc999f3c99130b1e13b9d81e357f771769"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold and a quadratic rise above it, and correctly notes saturation; the optional channel-length-modulation term does not detract.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1306,
        "output_tokens": 1646,
        "total_tokens": 2952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1306,
        "output_tokens": 1646,
        "total_tokens": 2952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Setup:** The source is grounded, the gate is driven by V_X, and the drain is held at 1 V. So V_GS = V_X and V_DS = 1 V (fixed), and I_X is the drain current of M₁. I neglect channel-length modulation.\n\n**Three regions as V_X rises from 0:**\n\n1. **Cutoff (V_X < V_TH):** M₁ is off, so I_X = 0.\n\n2. **Saturation (V_TH ≤ V_X ≤ V_TH + 1 V):** Here V_DS = 1 V ≥ V_GS − V_TH, so\n\n   I_X = ½ μₙC_ox (W/L)(V_X − V_TH)²\n\n   This is a parabola starting at V_X = V_TH.\n\n3. **Triode (V_X > V_TH + 1 V):** Now V_DS = 1 V < V_GS − V_TH, so\n\n   I_X = ½ μₙC_ox (W/L)[2(V_X − V_TH)(1 V) − (1 V)²] = μₙC_ox (W/L)(V_X − V_TH − 0.5 V)\n\n   This is a straight line in V_X with slope μₙC_ox(W/L)·(1 V).\n\n**Transition point:** At V_X = V_TH + 1 V, both expressions give I_X = ½ μₙC_ox (W/L)(1 V)². The slopes also match there (both equal μₙC_ox(W/L)·1 V), so the parabola joins the straight line smoothly.\n\n**Sketch:**\n\n```\n I_X\n  |                                     /\n  |                                   /   triode: straight line\n  |                                 /\n  |                               •  ← I_X = ½ μnCox (W/L)(1 V)²\n  |                            .\n  |                         .     saturation: parabola\n  |                     .\n  |               .\n  |________...·\n  +--------|----------------------|------------→ V_X\n          V_TH                V_TH + 1 V\n   (off)       (saturation)          (triode)\n```\n\nFor example, with V_TH = 0.4 V, the current is zero up to 0.4 V, parabolic from 0.4 V to 1.4 V, and linear above 1.4 V.",
        "format": "markdown",
        "sha256": "b107d5f425834a1a58b051cddf5a4f7f519bcab9854ee04ce7bf26d0399fff11"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, quadratic saturation behavior up to V_TH + 1 V, and the roughly linear triode-region rise beyond it, with consistent current expressions and transition point.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1461,
        "output_tokens": 2284,
        "total_tokens": 3745,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1555,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1461,
        "output_tokens": 2284,
        "total_tokens": 3745,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1555,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Setup:** The source is grounded, the gate is at V_X, and the drain is held at 1 V. So V_GS = V_X, V_DS = 1 V, and I_X is the drain current. I neglect channel-length modulation.\n\n**Regions of operation**\n\n1. **Cutoff (V_X < V_TH):** the device is off, so I_X = 0.\n\n2. **Saturation (V_TH ≤ V_X ≤ 1 V + V_TH):** here V_DS = 1 V ≥ V_GS − V_TH, so\n\n I_X = ½ μₙC_ox (W/L)(V_X − V_TH)²\n\n This is a parabola starting at V_X = V_TH.\n\n3. **Triode (V_X > 1 V + V_TH):** now V_DS = 1 V < V_GS − V_TH, so\n\n I_X = ½ μₙC_ox (W/L)[2(V_X − V_TH)(1 V) − (1 V)²]\n\n This is a straight line in V_X with slope μₙC_ox(W/L)(1 V).\n\n**Boundary check:** at V_X = 1 V + V_TH both expressions give I_X = ½ μₙC_ox(W/L)(1 V)², and both have slope μₙC_ox(W/L)(1 V). The parabola therefore joins the straight line smoothly.\n\n**Sketch**\n\n```\n I_X\n  |                                        /\n  |                                      /   triode:\n  |                                    /     straight line\n  |                                  /\n  |- - - - - - - - - - - - - - - - •   ½μnCox(W/L)(1 V)²\n  |                              .'\n  |                          . '      saturation:\n  |                     . '           parabola\n  |   cutoff      . '\n  |___________.-'\n  +-----------|--------------------|-----------> V_X\n             V_TH              1 V + V_TH\n```\n\nIf no threshold value is given, the breakpoints stay in terms of V_TH. With a typical V_TH = 0.4 V, for example, the device turns on at V_X = 0.4 V and passes from saturation into triode at V_X = 1.4 V.",
        "format": "markdown",
        "sha256": "315d9f9320e4e52a9f7275fa3fdb28c6c27df2e96de04acef268b9566bb0c1d3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, the quadratic saturation rise up to V_TH + 1 V, and the roughly linear triode rise beyond it, with consistent current equations and boundary behavior.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1461,
        "output_tokens": 1953,
        "total_tokens": 3414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1248,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1461,
        "output_tokens": 1953,
        "total_tokens": 3414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1248,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Setup:** The source is grounded, the gate is at V_X and the drain is held at 1 V, so V_GS = V_X and V_DS = 1 V. I_X flows from the battery into the drain, so I_X = I_D. I assume λ = 0.\n\n**Regions of operation**\n\n1. **0 ≤ V_X < V_TH (cutoff):** M₁ is off, so I_X = 0.\n\n2. **V_TH ≤ V_X ≤ 1 V + V_TH (saturation):** Here V_DS = 1 V ≥ V_GS − V_TH, so\n\n I_X = ½ μₙC_ox (W/L)(V_X − V_TH)²\n\n This is a parabola starting at V_X = V_TH.\n\n3. **V_X > 1 V + V_TH (triode):** Now V_DS = 1 V < V_GS − V_TH, so\n\n I_X = ½ μₙC_ox (W/L)[2(V_X − V_TH)(1 V) − (1 V)²]\n\n This is a straight line in V_X with slope μₙC_ox(W/L)(1 V).\n\n**Boundary:** At V_X = 1 V + V_TH both expressions give I_X = ½ μₙC_ox(W/L)(1 V)², and both have slope μₙC_ox(W/L)(1 V). The parabola therefore joins the straight line smoothly, with no kink.\n\n**Sketch**\n\n```\nI_X\n |                                    /\n |                                  /   triode: straight line,\n |                                /     slope = μnCox(W/L)(1 V)\n |                              /\n |- - - - - - - - - - - - - - •   ½ μnCox(W/L)(1 V)²\n |                          .'|\n |                       .-'  |\n |                   _.-'     |   saturation: parabola\n |_____________...--'         |\n +-------------|--------------|------------> V_X\n 0            V_TH        V_TH + 1 V\n    (off)\n```\n\nFor example, with V_TH = 0.4 V the current starts at V_X = 0.4 V, rises quadratically until V_X = 1.4 V, and increases linearly beyond that.",
        "format": "markdown",
        "sha256": "d72014a9be5de787fa5dca7d70fb3ea16131f3278771ee150e48f023e7165a72"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, quadratic saturation current from V_TH to V_TH + 1 V, and the roughly linear triode-region rise beyond, with consistent equations and boundary behavior.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1461,
        "output_tokens": 1946,
        "total_tokens": 3407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1225,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1461,
        "output_tokens": 1946,
        "total_tokens": 3407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1225,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, this device cannot act as a current source.**\n\n**Identifying the device:** The arrow is on the top terminal and points into the channel, so M₁ is a PMOS with its source at the top (where I_X enters). Its gate and drain are both grounded.\n\n**Why it fails:** A MOSFET acts as a current source only when it is in saturation and its gate‑source voltage is fixed, so that the current is nearly independent of the voltage at the output node. That requires the output to be taken at the drain, with the source at a fixed potential.\n\nHere the output node X is the source, so\n\n- V_SG = V_X − 0 = V_X\n- V_SD = V_X\n\nSince the gate and drain are tied together (both at ground), the transistor is diode‑connected. It is in saturation whenever it is on (V_SD = V_SG > V_SG − |V_TH|), but its current is\n\nI_X = ½ μₚC_ox (W/L)(V_X − |V_TH|)²\n\nwhich depends strongly on V_X. The impedance seen at X is about 1/g_m, which is low, whereas a current source needs a high output impedance.\n\nBecause the current changes with the voltage across the device, it behaves like a diode‑connected load, not a current source.",
        "format": "markdown",
        "sha256": "27d5fb7089c483362a67d2cb1b6a991187f9c168fe1e1d5000e3bd633267170f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as a PMOS with source at X and gate/drain grounded, and explains that the diode-connected device has low small-signal resistance (about 1/gₘ) and current dependent on Vₓ, so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 578,
        "output_tokens": 1675,
        "total_tokens": 2253,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1277,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 578,
        "output_tokens": 1675,
        "total_tokens": 2253,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1277,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No.** \n\nReading the symbol, the arrow on the top terminal points into the device, so M₁ is a PMOS with its source at the top, where I_X enters. Its gate and drain are both grounded, which makes it a diode-connected device.\n\n**Why it fails as a current source:**\n\n- A current source must deliver a current that is (ideally) independent of the voltage across it. For a MOSFET this means the gate-source voltage is held fixed and the output is taken at the drain.\n- Here the output node X is the source. So V_SG = V_X and V_SD = V_X, and any change in V_X directly changes the overdrive voltage.\n- When the device is on (V_X > |V_TH|), it is in saturation and\n\n I_X = ½ μₚC_ox (W/L)(V_X − |V_TH|)²\n\n so the current depends strongly (quadratically) on V_X. For V_X < |V_TH| the device is off.\n\n**Small-signal view:** the impedance seen at node X is about 1/g_m (in parallel with r_o), which is low. An ideal current source has a very high output impedance (r_o in a practical MOS current source).\n\nSo M₁ behaves like a diode-connected load, not a current source.",
        "format": "markdown",
        "sha256": "562f2e3e414f0d8bf2b4c81f82f17420ddac28549707078cc35661ba0ac7330a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as a PMOS with source at X and gate tied to drain at ground, and explains that its diode-connected input impedance is about 1/gₘ, so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 578,
        "output_tokens": 1849,
        "total_tokens": 2427,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 578,
        "output_tokens": 1849,
        "total_tokens": 2427,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No.** The transistor is a PMOS device (the arrow on the top terminal points into the device, so the source is on top), and its gate and drain are both grounded. The node where I_X enters is therefore the source.\n\n- **Gate-source voltage is not fixed:** V_SG = V_X − 0 = V_X, so any change in the voltage across the device changes its overdrive directly.\n- **Operating region:** V_SD = V_SG = V_X, so the device is in saturation whenever it is on (V_X > |V_TH|). It is effectively diode-connected.\n- **Current:**\n\n I_X = ½ μ_p C_ox (W/L)(V_X − |V_TH|)²\n\n This depends strongly (quadratically) on V_X, and I_X = 0 for V_X < |V_TH|.\n\n- **Small-signal view:** the impedance seen at the terminal is about 1/g_m (more precisely 1/g_m ∥ r_o), which is low. A current source should present a high impedance, on the order of r_o.\n\nAn ideal current source delivers a current that is independent of the voltage across it. This device does not, even though it is in saturation, so it cannot act as a current source.\n\nFor a PMOS to work as a current source, its source must be tied to a fixed voltage (e.g., V_DD), its gate to a constant bias, and the current taken from the drain.",
        "format": "markdown",
        "sha256": "06574b2e716672d1a9311fcf63d0c09d440a29de0eb0aa7c7a202e5e1df168fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS and its grounded gate/drain connections, and explains that the diode-connected device presents a low impedance of about 1/gm, so it cannot act as a current source. The threshold cutoff is a standard idealization and does not affect the conclusion.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 578,
        "output_tokens": 2821,
        "total_tokens": 3399,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2377,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 578,
        "output_tokens": 2821,
        "total_tokens": 3399,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2377,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Since no component values or specific question were given, here is a general analysis, assuming M₁ is in saturation.\n\n## What the circuit is\n\nThis is a **PMOS common-source amplifier with source degeneration**. The input drives the gate, the output is taken at the drain across the load R_D, and R_S sits between the source and V_DD. Its small-signal gain with λ = 0 is\n\n**A_v = −g_m R_D / (1 + g_m R_S)**\n\n## DC (bias) analysis\n\nLet K = μ_pC_ox(W/L) and V₁ = V_DD − V_in − |V_TP|, and take λ = 0.\n\n- Source voltage: V_S = V_DD − I_D R_S, so V_SG = V_DD − I_D R_S − V_in\n- Square law: I_D = ½K(V₁ − I_D R_S)²\n\nSolving the quadratic for the overdrive voltage:\n\n- V_ov = [√(1 + 2K R_S V₁) − 1] / (K R_S)\n- I_D = (V₁ − V_ov)/R_S\n- V_out = I_D R_D\n\nOperating conditions:\n\n- **On:** V_in < V_DD − |V_TP|\n- **Saturation:** V_SD ≥ V_ov, which is equivalent to V_out = I_D R_D ≤ V_in + |V_TP|\n\n## Small-signal analysis\n\nV_DD is AC ground, so R_S goes from source to ground and R_D from drain to ground.\n\n**Gain with λ = 0.** Let i be the small-signal current flowing from source to drain:\n\n- i = g_m(v_s − v_in)\n- v_s = −i R_S\n- so i = −g_m v_in / (1 + g_m R_S)\n- v_out = i R_D\n\nThis gives\n\nA_v = −g_m R_D / (1 + g_m R_S) = −R_D / (1/g_m + R_S)\n\nwhere g_m = K·V_ov = √(2K I_D) = 2I_D/V_ov.\n\nIf g_m R_S ≫ 1, then A_v ≈ −R_D/R_S. The gain is then set by a resistor ratio and is nearly independent of the transistor.\n\n**Gain with channel-length modulation (finite r_o):**\n\nA_v = −g_m r_o R_D / [R_D + R_S + r_o + g_m r_o R_S]\n\n**Impedances:**\n\n- R_in = ∞ at low frequency, since the input is the gate.\n- R_out = R_D ‖ [r_o + (1 + g_m r_o)R_S]. This is approximately R_D, and exactly R_D when λ = 0.\n\n**Body effect:** if the n-well is tied to V_DD rather than to the source, replace g_m R_S with (g_m + g_mb)R_S in the denominators.\n\n## Large-signal behavior\n\n| V_in range | M₁ state | V_out |\n|---|---|---|\n| V_in > V_DD − \\|V_TP\\| | Off | 0 |\n| Below that, while V_out ≤ V_in + \\|V_TP\\| | Saturation | Rises as V_in falls, with slope approaching −R_D/R_S |\n| V_in lower still | Triode | Flattens, approaching V_DD·R_D/(R_S + R_D) |\n\n## Effect of R_S\n\n- **Lower gain:** the gain is reduced by the factor (1 + g_m R_S) compared with a plain common-source stage.\n- **Better linearity and bias stability:** R_S provides local negative feedback, so the gain depends less on g_m and on process and temperature variations.\n- **Less headroom:** the DC drop I_D R_S reduces the available output swing.\n\nIf you have specific values (V_DD, R_S, R_D, W/L, V_TP, λ), I can work out the numbers.",
        "format": "markdown",
        "sha256": "f7cd67900eb405b25cac5c683313a1caa21d19ffd9ef1b6f72f71e99bc3a11fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as a PMOS common-source stage with source degeneration and gives the inverting gain −gₘR_D/(1+gₘR_S), satisfying the full-credit rule. The additional analysis is consistent with the circuit.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 4905,
        "total_tokens": 6467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3648,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 4905,
        "total_tokens": 6467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3648,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a **PMOS common-source amplifier with source degeneration**: the input drives the gate, R_S sits between the source and V_DD, and the output is taken at the drain across R_D. Since the figure comes with no specific question, I give the bias, gain and port resistances, assuming M₁ is in saturation.\n\n## 1. DC (bias) analysis\n\nWith V_SG = V_DD − I_D R_S − V_in, the square law gives\n\n$$I_D=\\tfrac12\\mu_pC_{ox}\\frac WL\\left(V_{DD}-I_DR_S-V_{in}-|V_{TP}|\\right)^2$$\n\nLet K = μ_pC_ox(W/L) and V₀ = V_DD − V_in − |V_TP|. Solving the quadratic for the overdrive voltage:\n\n$$V_{ov}=V_{SG}-|V_{TP}|=\\frac{\\sqrt{1+2KR_SV_0}-1}{KR_S},\\qquad I_D=\\frac{V_0-V_{ov}}{R_S},\\qquad V_{out}=I_DR_D$$\n\nOperating regions:\n\n- **Off:** V_in ≥ V_DD − |V_TP|, so I_D = 0 and V_out = 0.\n- **Saturation:** requires V_SD ≥ V_SG − |V_TP|, i.e. V_out = I_D R_D ≤ V_in + |V_TP|.\n- **Triode:** for lower V_in the gain collapses and V_out approaches V_DD·R_D/(R_D + R_S + R_on).\n\n## 2. Small-signal gain\n\nV_DD is an AC ground, so the small-signal circuit is identical to the NMOS degenerated common-source stage, with g_m = K·V_ov.\n\n**With λ = 0 and no body effect:** let i_d be the drain current change. Then v_s = −i_d R_S and i_d = g_m(v_s − v_in), so\n\n$$i_d=\\frac{-g_m v_{in}}{1+g_mR_S},\\qquad v_{out}=i_dR_D$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-\\frac{g_mR_D}{1+g_mR_S}=-\\frac{R_D}{\\dfrac1{g_m}+R_S}}$$\n\nThe stage is inverting: raising V_in reduces V_SG, which reduces I_D and lowers V_out. The gain is the resistance at the drain divided by the total resistance in the source path.\n\n**With r_o and body effect included** (g_mb applies if the n-well is tied to V_DD; set g_mb = 0 if it is tied to the source):\n\n$$A_v=-\\frac{g_mr_oR_D}{R_D+R_S+r_o+(g_m+g_{mb})R_Sr_o}$$\n\n## 3. Port resistances (low frequency)\n\n- **Input resistance:** R_in = ∞, since the gate draws no current.\n- **Output resistance:**\n\n$$R_{out}=R_D\\,\\|\\,\\big[r_o+R_S+(g_m+g_{mb})r_oR_S\\big]$$\n\nThis is approximately R_D, because degeneration raises the resistance looking into the drain by roughly the factor (1 + g_m R_S).\n\n## 4. Effect of the degeneration resistor\n\n- **Lower gain:** the equivalent transconductance falls from g_m to G_m = g_m/(1 + g_m R_S).\n- **Better linearity:** if g_m R_S ≫ 1, then A_v ≈ −R_D/R_S, set by a resistor ratio and nearly independent of g_m, bias current, process and temperature.\n- **More stable bias:** R_S provides negative feedback on I_D.\n- **Less headroom:** R_S drops I_D R_S, since V_DD = I_D R_S + V_SD + I_D R_D, so the output swing is smaller.",
        "format": "markdown",
        "sha256": "fce725048715bfea94b62d2bb9f59c87a13dd6754c447266dd7587c220c95e1e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS). The additional body-effect and ro refinements are consistent with the topology.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 5248,
        "total_tokens": 6810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3930,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 5248,
        "total_tokens": 6810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3930,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nThis is a **PMOS common-source amplifier with source degeneration**. The input drives the gate, the output is taken at the drain across the load $R_D$ (to ground), and $R_S$ sits between the source and $V_{DD}$. It is the upside-down version of the NMOS degenerated CS stage. No component values are given, so the analysis is symbolic.\n\n---\n\n## 1. DC (large-signal) analysis\n\nThe gate draws no current, so the same current $I_D$ flows through $R_S$, $M_1$ and $R_D$:\n\n$$V_S = V_{DD}-I_DR_S,\\qquad V_{SG}=V_{DD}-I_DR_S-V_{in},\\qquad V_{out}=I_DR_D$$\n\nIn saturation (neglecting channel-length modulation):\n\n$$I_D=\\tfrac12\\mu_pC_{ox}\\tfrac{W}{L}\\left(V_{DD}-I_DR_S-V_{in}-|V_{THP}|\\right)^2$$\n\nLet $K=\\mu_pC_{ox}W/L$ and $V_1=V_{DD}-V_{in}-|V_{THP}|$. Solving the quadratic for the overdrive voltage:\n\n$$V_{ov}=\\frac{\\sqrt{1+2KR_SV_1}-1}{KR_S},\\qquad I_D=\\tfrac12KV_{ov}^2,\\qquad V_{out}=I_DR_D$$\n\n**Operating regions as $V_{in}$ falls from $V_{DD}$ toward 0:**\n\n| Region | Condition | Output |\n|---|---|---|\n| Off | $V_{in}\\ge V_{DD}-\\lvert V_{THP}\\rvert$ | $I_D=0$, $V_{out}=0$ |\n| Saturation | $V_{in}<V_{DD}-\\lvert V_{THP}\\rvert$ and $V_{out}\\le V_{in}+\\lvert V_{THP}\\rvert$ | $V_{out}=I_DR_D$ rises as $V_{in}$ falls |\n| Triode | $V_{out}>V_{in}+\\lvert V_{THP}\\rvert$ | $V_{out}$ flattens toward $V_{DD}\\dfrac{R_D}{R_D+R_S+R_{on}}$ |\n\nThe stage is useful as an amplifier only in the saturation region.\n\n---\n\n## 2. Small-signal analysis ($\\lambda=0$, no body effect)\n\n$V_{DD}$ is AC ground, and the PMOS small-signal model is the same as the NMOS one, with $g_m=KV_{ov}=\\sqrt{2KI_D}$.\n\n**Source node:**\n$$\\frac{v_s}{R_S}=g_m(v_{in}-v_s)\\;\\Rightarrow\\; v_s=\\frac{g_mR_S}{1+g_mR_S}v_{in},\\qquad v_{gs}=\\frac{v_{in}}{1+g_mR_S}$$\n\n**Drain node:** $v_{out}=-g_mv_{gs}R_D$, so\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-\\frac{g_mR_D}{1+g_mR_S}=-\\frac{R_D}{\\dfrac1{g_m}+R_S}}$$\n\n- The stage is **inverting**: when $V_{in}$ rises, $V_{SG}$ falls, $I_D$ falls, and $V_{out}$ drops.\n- Equivalent transconductance: $G_m=\\dfrac{g_m}{1+g_mR_S}$.\n- If $g_mR_S\\gg1$, then $A_v\\approx-R_D/R_S$, a ratio of resistors that is nearly independent of the transistor.\n- If $R_S=0$, it reduces to the plain CS gain $-g_mR_D$.\n- $R_{in}=\\infty$ at low frequency, and $R_{out}=R_D$.\n\nAs a check, the bias solution gives $1+g_mR_S=\\sqrt{1+2KR_SV_1}$. Differentiating the large-signal $V_{out}(V_{in})$ gives the same gain:\n\n$$A_v=-\\frac{R_D}{R_S}\\left[1-\\frac{1}{\\sqrt{1+2KR_SV_1}}\\right]$$\n\n---\n\n## 3. Including $r_o$ and body effect\n\n$$A_v=-\\frac{g_mr_oR_D}{R_D+R_S+r_o+(g_m+g_{mb})R_Sr_o}$$\n\n$$R_{out}=R_D\\,\\Big\\|\\,\\big[r_o+R_S+(g_m+g_{mb})r_oR_S\\big]$$\n\nSet $g_{mb}=0$ if the n-well is tied to the source. Degeneration raises the resistance seen looking into the drain by roughly a factor of $(1+g_mR_S)$.\n\n---\n\n## 4. Interpretation\n\n- $R_S$ provides **negative feedback**: it senses $I_D$ and subtracts $I_DR_S$ from $V_{SG}$, with loop gain $g_mR_S$.\n- **Benefits:** the gain is more linear and less sensitive to $g_m$ (process, temperature, signal level), and the output resistance of the transistor branch is higher.\n- **Costs:** the gain is lower by a factor of $(1+g_mR_S)$, the drop $I_DR_S$ uses up voltage headroom, and $R_S$ adds thermal noise.\n- **Rule of thumb:** gain = −(resistance at the drain) ÷ ($1/g_m$ + resistance in the source path).",
        "format": "markdown",
        "sha256": "a4e787fdb51ed8f5dd3862994f1cd5eedbf4dd3e180f5896afeff202a53b20c4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies the PMOS common-source stage with source degeneration and gives the correct inverting gain, -gm RD/(1 + gm RS), satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 7825,
        "total_tokens": 9387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 7825,
        "total_tokens": 9387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nThis is an NMOS **source follower (common-drain stage)**: the input drives the gate, the drain is tied to V_DD, and the output is taken at the source across R_S. It acts as a voltage buffer with gain a little below 1, high input impedance and low output impedance.\n\n## Large-signal behavior\n\n- **V_in < V_TH:** M₁ is off, I_D = 0, and V_out = 0.\n- **V_in > V_TH:** M₁ turns on and V_out follows V_in, shifted down by V_GS.\n\nM₁ is in saturation whenever it is on. Saturation needs V_DS ≥ V_GS − V_TH, i.e. V_DD − V_out ≥ V_in − V_out − V_TH, which reduces to V_in ≤ V_DD + V_TH. This holds for any input up to V_DD.\n\nNeglecting channel-length modulation, the output satisfies\n\n$$\\frac{V_{out}}{R_S}=\\frac{1}{2}\\mu_nC_{ox}\\frac{W}{L}\\left(V_{in}-V_{TH}-V_{out}\\right)^2$$\n\nWith K = μₙC_ox(W/L) and no body effect, this solves to\n\n$$V_{out}=(V_{in}-V_{TH})+\\frac{1}{KR_S}-\\frac{\\sqrt{1+2KR_S(V_{in}-V_{TH})}}{KR_S}$$\n\nThe figure does not show the body connection. If the body is grounded, V_SB = V_out, so V_TH rises as V_out rises:\n\n$$V_{TH}=V_{TH0}+\\gamma\\left(\\sqrt{2\\Phi_F+V_{out}}-\\sqrt{2\\Phi_F}\\right)$$\n\n## Small-signal analysis\n\nHere v_gs = v_in − v_out and v_bs = −v_out. KCL at the output node gives\n\n$$g_m(v_{in}-v_{out})-g_{mb}v_{out}=\\frac{v_{out}}{R_S}+\\frac{v_{out}}{r_O}$$\n\n**Voltage gain:**\n\n$$A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_m\\,(R_S\\|r_O)}{1+(g_m+g_{mb})(R_S\\|r_O)}$$\n\nNeglecting r_O and body effect, this becomes\n\n$$A_v=\\frac{g_mR_S}{1+g_mR_S}=\\frac{R_S}{R_S+1/g_m}$$\n\nThis is a voltage divider between 1/g_m (looking into the source) and R_S. The gain is positive (non-inverting) and always less than 1. Even as g_mR_S → ∞, body effect limits it to g_m/(g_m + g_mb) = 1/(1 + η).\n\n**Input resistance:** R_in → ∞ at low frequency, since the gate draws no current.\n\n**Output resistance** (set v_in = 0 and apply a test voltage at the output):\n\n$$R_{out}=R_S\\,\\|\\,r_O\\,\\|\\,\\frac{1}{g_m}\\,\\|\\,\\frac{1}{g_{mb}}\\approx\\frac{1}{g_m+g_{mb}}$$\n\n## Key observations\n\n1. **Level shift:** V_out = V_in − V_GS, so the output sits at least V_TH below the input and cannot reach V_DD. This costs voltage headroom.\n2. **Nonlinearity:** With a resistor bias, I_D = V_out/R_S changes with the signal, so g_m and the gain vary with V_in. The gain starts near 0 at V_in ≈ V_TH and rises toward its asymptote. Replacing R_S with a current source keeps I_D constant and improves linearity.\n3. **Body effect:** V_TH varies with V_out, which reduces the gain and adds further nonlinearity. Tying the body to the source removes this (g_mb = 0), but for an NMOS device that requires an isolated well.\n4. **Use:** Its role is to drive low-impedance loads or shift DC levels, not to provide voltage gain.",
        "format": "markdown",
        "sha256": "75a15a416b7be4bb403a848e9f9903b92f02487d5dc9210506d64a232e605db4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, less-than-unity gain gm·RS/(1 + gm·RS). The added body-effect and output-resistance refinements are consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1266,
        "output_tokens": 3732,
        "total_tokens": 4998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2353,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1266,
        "output_tokens": 3732,
        "total_tokens": 4998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2353,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nThis is an NMOS **source follower (common-drain stage)**. The input drives the gate, the drain is tied to V_DD, and the output is taken at the source across R_S. It acts as a voltage buffer: gain slightly below 1, high input impedance, low output impedance.\n\n---\n\n## 1. Large-signal behavior\n\n**Cutoff (V_in < V_TH):** M1 is off, I_D = 0, so V_out = 0.\n\n**Conduction (V_in > V_TH):** M1 turns on and is in saturation. The saturation condition is\n\n$$V_{DS} \\ge V_{GS}-V_{TH} \\;\\Rightarrow\\; V_{DD}-V_{out} \\ge V_{in}-V_{out}-V_{TH} \\;\\Rightarrow\\; V_{in} \\le V_{DD}+V_{TH}$$\n\nso M1 stays saturated for any V_in up to V_DD. Neglecting channel-length modulation, the input-output characteristic is\n\n$$\\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}\\left(V_{in}-V_{TH}-V_{out}\\right)^2 R_S = V_{out}$$\n\nNeglecting body effect and writing K = μnCox(W/L), this solves to\n\n$$V_{out} = (V_{in}-V_{TH}) - \\frac{\\sqrt{1+2KR_S(V_{in}-V_{TH})}-1}{KR_S}$$\n\nThe output follows the input, shifted down by V_GS = V_TH + V_OV:\n\n$$V_{out} = V_{in} - V_{GS}$$\n\nWith V_in = V_DD, the output can rise no higher than V_DD − V_GS.\n\n---\n\n## 2. Small-signal voltage gain\n\nIn the small-signal model, v_gs = v_in − v_out and v_bs = −v_out (body grounded). KCL at the output node gives\n\n$$g_m(v_{in}-v_{out}) - g_{mb}v_{out} = \\frac{v_{out}}{R_S}$$\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_S}{1+(g_m+g_{mb})R_S}}$$\n\n- **Without body effect:** A_v = R_S / (R_S + 1/g_m), a voltage divider between 1/g_m and R_S.\n- **With r_o included:** replace R_S with R_S ∥ r_o.\n- **Limit for g_m R_S ≫ 1:** A_v → g_m/(g_m + g_mb) = 1/(1 + η), typically about 0.8–0.9. The gain never reaches 1 when the body is grounded.\n\nThe gain is positive (non-inverting). It starts near 0 at V_in ≈ V_TH, where g_m ≈ 0, and rises monotonically toward 1/(1 + η) as V_in increases. Ignoring body effect, the large-signal solution gives\n\n$$A_v = 1 - \\frac{1}{\\sqrt{1+2KR_S(V_{in}-V_{TH})}}$$\n\n---\n\n## 3. Input and output resistance\n\n**Input resistance:** R_in → ∞ at low frequency, since the gate draws no current.\n\n**Output resistance:** setting v_in = 0 and applying a test voltage at the source,\n\n$$R_{out} = R_S \\,\\|\\, r_o \\,\\|\\, \\frac{1}{g_m} \\,\\|\\, \\frac{1}{g_{mb}} \\approx \\frac{1}{g_m+g_{mb}}$$\n\n---\n\n## 4. Limitations\n\n1. **Nonlinearity:** the bias current I_D = V_out/R_S changes with the signal, so g_m and the gain vary with V_in. Body effect makes V_TH depend on V_out, which adds further nonlinearity.\n2. **Headroom loss:** the DC level shift of V_GS reduces the available output swing.\n3. **Gain below 1:** the stage provides no voltage gain and is useful only for buffering or level shifting.\n\nA common improvement is to replace R_S with a constant current source. This fixes I_D, which improves linearity and gives A_v ≈ g_m/(g_m + g_mb). Using a PMOS follower with its source tied to its body removes the body effect as well.",
        "format": "markdown",
        "sha256": "9fd2a4da0d12dde80a75e3e15b2081679e37200597eacffc7757988167a84c3e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the required positive, sub-unity gain, including the equivalent no-body-effect formula. The supplemental output-resistance expression is imperfect, but the golden full-credit rule makes the correct topology and gain sufficient.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1266,
        "output_tokens": 3693,
        "total_tokens": 4959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1266,
        "output_tokens": 3693,
        "total_tokens": 4959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identification\n\nThis is a **source follower (common-drain stage)**. The input drives the gate of M₁, the drain is tied to V_DD (an ac ground), and the output is taken at the source across R_S. I assume the body of M₁ is tied to ground, since the symbol shows no bulk terminal.\n\n## Large-signal behavior\n\n- **V_in < V_TH:** M₁ is off, I_D = 0, and V_out = 0.\n- **V_in > V_TH:** M₁ turns on and V_out follows V_in, shifted down by V_GS:\n\n$$V_{out}=V_{in}-V_{GS}$$\n\n**Region of operation.** Saturation requires V_DS ≥ V_GS − V_TH:\n\n$$V_{DD}-V_{out}\\ \\ge\\ V_{in}-V_{out}-V_{TH}\\ \\Rightarrow\\ V_{in}\\le V_{DD}+V_{TH}$$\n\nSo M₁ is in saturation for any V_in up to V_DD; it never enters triode.\n\n**Transfer characteristic** (neglecting λ). Setting the drain current equal to the current in R_S:\n\n$$\\frac12\\mu_nC_{ox}\\frac{W}{L}\\,(V_{in}-V_{TH}-V_{out})^2=\\frac{V_{out}}{R_S}$$\n\nWith k = μₙC_ox(W/L) and V_TH treated as constant, this solves to:\n\n$$V_{out}=(V_{in}-V_{TH})+\\frac{1}{kR_S}-\\sqrt{\\frac{1}{(kR_S)^2}+\\frac{2(V_{in}-V_{TH})}{kR_S}}$$\n\nBecause V_SB = V_out, the threshold actually rises with the output (body effect):\n\n$$V_{TH}=V_{TH0}+\\gamma\\left(\\sqrt{2\\Phi_F+V_{out}}-\\sqrt{2\\Phi_F}\\right)$$\n\n## Small-signal voltage gain\n\nIn the small-signal model, v_gs = v_in − v_out and v_bs = −v_out. KCL at the output (λ = 0) gives:\n\n$$g_m(v_{in}-v_{out})-g_{mb}v_{out}=\\frac{v_{out}}{R_S}$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_mR_S}{1+(g_m+g_{mb})R_S}}$$\n\nIncluding channel-length modulation, replace R_S with R_S ∥ r_o:\n\n$$A_v=\\frac{g_m(R_S\\parallel r_o)}{1+(g_m+g_{mb})(R_S\\parallel r_o)}$$\n\nLimiting cases:\n\n- **No body effect** (g_mb = 0): A_v = R_S / (R_S + 1/g_m). This is a voltage divider between 1/g_m and R_S, and it approaches 1 when g_m R_S ≫ 1.\n- **With body effect and g_m R_S ≫ 1:** A_v → g_m/(g_m + g_mb) = 1/(1 + η). For a typical η ≈ 0.2–0.25, the gain is about 0.8.\n\nThe gain is positive (non-inverting) and always less than 1.\n\n## Input and output resistance\n\n- **Input resistance:** R_in → ∞ at low frequency, since the input is a MOS gate.\n- **Output resistance:** with v_in = 0 and a test voltage at the output, the currents through R_S, r_o, and the g_m and g_mb sources add:\n\n$$R_{out}=R_S\\parallel r_o\\parallel\\frac{1}{g_m}\\parallel\\frac{1}{g_{mb}}\\approx\\frac{1}{g_m+g_{mb}}$$\n\n## Key observations\n\n1. **Buffer:** high input impedance, low output impedance, and gain near unity. It is used to drive low-impedance loads or as a level shifter.\n2. **Nonlinearity:** I_D = V_out/R_S changes with the signal, so g_m and therefore A_v vary with V_in. The gain starts at 0 when V_in = V_TH and rises toward 1/(1 + η). The body effect adds further nonlinearity. Replacing R_S with a current source keeps I_D constant and improves linearity.\n3. **Headroom:** the output sits V_GS below the input, so V_out,max = V_DD − V_GS even with V_in = V_DD.",
        "format": "markdown",
        "sha256": "6f37411af99a57d108f7162538d727ad18f529390d9a7f1fff7fe4ecebf9f657"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies the source follower and gives the correct positive, sub-unity gain, including the body-effect form and the required no-body-effect expression. The supplementary output-resistance slip does not change the central answer.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1266,
        "output_tokens": 5034,
        "total_tokens": 6300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1266,
        "output_tokens": 5034,
        "total_tokens": 6300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**What it is:** M1 is an NMOS transistor with the input at the source, the output at the drain, and the gate tied to V_DD (an AC ground). This is a common-gate (CG) amplifier whose gate bias is V_b = V_DD. No specific question came with the figure, so here is a general analysis.\n\n## 1. Bias (large-signal) analysis\n\n- V_G = V_DD, V_S = V_in, so V_GS = V_DD − V_in.\n- V_out = V_DD − I_D·R_D.\n- M1 conducts only if V_in < V_DD − V_TH.\n- In saturation (λ = 0):\n\n I_D = ½ μnCox (W/L)(V_DD − V_in − V_TH)²\n\n V_out = V_DD − ½ μnCox (W/L) R_D (V_DD − V_in − V_TH)²\n\n**Saturation condition.** M1 is saturated when V_D ≥ V_G − V_TH:\n\nV_DD − I_D R_D ≥ V_DD − V_TH  ⟹  **I_D·R_D ≤ V_TH**\n\nBecause the gate sits at V_DD, the DC drop across R_D cannot exceed one threshold voltage, or M1 enters the triode region.\n\n**Transfer characteristic (V_in swept from V_DD down to 0):**\n\n- V_in ≥ V_DD − V_TH: M1 is off and V_out = V_DD.\n- Below that: M1 is saturated and V_out falls parabolically as V_in decreases.\n- When V_out reaches V_DD − V_TH, M1 enters triode. This occurs at V_in = V_DD − V_TH − √(2V_TH / (μnCox (W/L) R_D)).\n\nThe bias current I_D flows out of the source, so whatever drives V_in must sink this DC current and sit at the DC level V_DD − V_GS.\n\n## 2. Small-signal analysis (M1 in saturation, λ = 0)\n\nWith the gate at AC ground, v_gs = −v_in. A rise in v_in reduces the drain current by g_m·v_in, which raises v_out by g_m·v_in·R_D.\n\n- **Voltage gain:** A_v = v_out/v_in = **+g_m R_D** (non-inverting)\n- **Input resistance:** R_in = **1/g_m** (low)\n- **Output resistance:** R_out = **R_D**\n- **Current gain:** 1\n\nHere g_m = μnCox (W/L)(V_DD − V_in − V_TH) = √(2 μnCox (W/L) I_D) = 2I_D/(V_GS − V_TH).\n\nIf the signal source has resistance R_S: A_v = g_m R_D/(1 + g_m R_S) = R_D/(1/g_m + R_S).\n\nIf λ ≠ 0:\n- A_v = (1 + g_m r_O) R_D/(r_O + R_D)\n- R_in = (r_O + R_D)/(1 + g_m r_O)\n- R_out = R_D ‖ r_O\n\nIf the body is grounded, body effect replaces g_m with g_m + g_mb in these expressions.\n\n## 3. Consequence of tying the gate to V_DD: limited gain\n\nUsing g_m = 2I_D/(V_GS − V_TH):\n\nA_v = g_m R_D = 2(I_D R_D)/(V_GS − V_TH)\n\nSince I_D R_D ≤ V_TH:\n\n**A_v,max = 2V_TH/(V_GS − V_TH) = 2V_TH/(V_DD − V_in − V_TH)**\n\nFor example, with V_TH = 0.4 V and an overdrive of 0.1 V, the gain cannot exceed about 8. In practice it is lower, because some margin is needed for the output swing.\n\n## Summary\n\nThe circuit is a non-inverting common-gate amplifier with A_v = g_m R_D, R_in = 1/g_m and R_out = R_D. Tying the gate to V_DD removes the need for a separate bias voltage, but it limits the drop across R_D to V_TH and so caps the gain at 2V_TH/(V_GS − V_TH). Higher gain requires biasing the gate below V_DD.",
        "format": "markdown",
        "sha256": "d45af09623aeb5f89546110df559cf87dfe87530353c222c44562d4c58235912"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source as the input and the gate as AC-grounded, giving a common-gate stage with non-inverting gain approximately +gmRD and input resistance approximately 1/gm. The added output-resistance and bias analysis is consistent with the circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 16617,
        "total_tokens": 17852,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15215,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 16617,
        "total_tokens": 17852,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15215,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**This is a common-gate (CG) amplifier.** The input drives the source of M1, the output is taken at the drain, the gate is tied to V_DD (AC ground), and R_D is the load. No component values are given, so the analysis below is symbolic.\n\n## 1. Bias (DC) conditions\n\n- V_GS = V_DD − V_in and V_out = V_DD − I_D·R_D.\n- M1 conducts only if V_in < V_DD − V_TH.\n- In saturation (λ = 0): I_D = ½·μnCox·(W/L)·(V_DD − V_in − V_TH)².\n- Saturation requires V_GD ≤ V_TH. Because the gate is at V_DD, this means V_DD − V_out ≤ V_TH, or\n\n  **I_D·R_D ≤ V_TH, so I_D,max = V_TH / R_D.**\n\n- The output can therefore only lie between V_DD − V_TH and V_DD while M1 is saturated.\n- The bias current flows out through the input terminal, so the signal source must provide a DC path to ground.\n\n## 2. Large-signal transfer characteristic (V_out versus V_in)\n\n| Range of V_in | M1 region | V_out |\n|---|---|---|\n| V_in ≥ V_DD − V_TH | Off | V_DD |\n| V_in1 < V_in < V_DD − V_TH | Saturation | V_DD − ½·μnCox·(W/L)·R_D·(V_DD − V_in − V_TH)² |\n| V_in < V_in1 | Triode | Below V_DD − V_TH; M1 acts as a resistor in series with R_D and the gain collapses |\n\nThe edge of triode is at V_in1 = V_DD − V_TH − √(2·V_TH / (μnCox·(W/L)·R_D)).\n\nIn saturation the slope is positive (equal to gm·R_D), so the stage is non-inverting.\n\n## 3. Small-signal behaviour (M1 in saturation)\n\n| Quantity | λ = 0 | λ > 0 |\n|---|---|---|\n| Voltage gain A_v | +gm·R_D | (1 + gm·ro)·R_D / (ro + R_D) |\n| Input resistance R_in | 1/gm | (R_D + ro) / (1 + gm·ro) |\n| Output resistance R_out | R_D | R_D ‖ ro (ideal voltage source at the input) |\n\n- If the signal source has resistance R_S, then A_v = R_D / (R_S + 1/gm) for λ = 0, and R_out = R_D ‖ [ro + (1 + gm·ro)·R_S].\n- If the body is grounded rather than tied to the source, replace gm with gm + gmb.\n\n## 4. Consequences of tying the gate to V_DD\n\n- **Limited gain:** A_v = gm·R_D = 2·I_D·R_D / V_OV ≤ 2·V_TH / V_OV, where V_OV = V_GS − V_TH.\n- **Limited output swing:** at most about V_TH peak-to-peak.\n- **Low input impedance:** 1/gm, which is useful for matching (for example to 50 Ω) but loads a voltage source heavily.\n\n## 5. Numerical illustration (assumed values)\n\nSuppose the targets are R_in = 50 Ω and R_out = 500 Ω, with V_TH = 0.4 V, μnCox = 200 µA/V² and λ = 0:\n\n- R_D = 500 Ω, so I_D,max = 0.4 V / 500 Ω = **0.8 mA**.\n- gm = 1/50 Ω = 20 mS, so W/L = gm² / (2·μnCox·I_D) = **1250**.\n- A_v = gm·R_D = **10**.\n\nIf your problem gives specific values or asks for a particular quantity, send them and I can work that case.",
        "format": "markdown",
        "sha256": "db160ac14679749d9bda825adfb0fd2bb1502f125656847f064375117f744508"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the key results: input resistance approximately 1/gm and positive gain approximately gm(RD || ro). The additional analysis is largely consistent and does not undermine the essential answer.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 6880,
        "total_tokens": 8115,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5585,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 6880,
        "total_tokens": 8115,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5585,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **common-gate (CG) NMOS amplifier**: the gate is tied to V_DD (an AC ground), the input is applied at the source, and the output is taken at the drain across the load R_D. Since no specific question or component values were given, here is a general analysis.\n\n## 1. Bias (DC) conditions\n\n- V_G = V_DD, V_S = V_in, V_D = V_out = V_DD − I_D·R_D\n- V_GS = V_DD − V_in, so M1 is on only if V_in < V_DD − V_TH\n- In saturation (λ = 0): I_D = ½·μnCox·(W/L)·(V_DD − V_in − V_TH)²\n- The DC level of V_in sets the bias current, and the input source must sink I_D.\n\n**Saturation condition.** M1 needs V_D ≥ V_G − V_TH:\n\nV_DD − I_D·R_D ≥ V_DD − V_TH  ⟹  **I_D·R_D ≤ V_TH**\n\nBecause the gate sits at V_DD, the drop across R_D can never exceed one threshold voltage. This is the key limitation of this circuit.\n\n## 2. Large-signal transfer characteristic\n\nLet k = μnCox·(W/L).\n\n| Range of V_in | M1 region | V_out |\n|---|---|---|\n| V_in ≥ V_DD − V_TH | Off | V_DD |\n| V_in1 < V_in < V_DD − V_TH | Saturation | V_DD − ½·k·R_D·(V_DD − V_in − V_TH)² |\n| V_in < V_in1 | Triode | Gain collapses; M1 acts as a resistor |\n\nThe edge of the triode region is at V_in1 = V_DD − V_TH − √(2V_TH / (k·R_D)).\n\nIn saturation, V_out falls as V_in falls. The slope is positive, so the stage is non-inverting.\n\n## 3. Small-signal behavior\n\nWith the gate at AC ground, v_gs = −v_in.\n\nFor λ = 0 and no body effect:\n\n- **Voltage gain:** A_v = v_out/v_in = **+g_m·R_D**\n- **Input resistance:** R_in = **1/g_m** (low)\n- **Output resistance:** R_out = **R_D**\n- With a source resistance R_S: A_v = R_D / (R_S + 1/g_m)\n\nWith channel-length modulation (r_o finite):\n\n- A_v = (1 + g_m·r_o)·R_D / (R_D + r_o)\n- R_in = (R_D + r_o) / (1 + g_m·r_o)\n- R_out = R_D ‖ r_o (input driven by an ideal voltage source)\n\nWith body effect (bulk grounded while the source sits at V_in), replace g_m by g_m + g_mb.\n\n## 4. Gain limit\n\nUsing g_m = 2I_D/V_ov with V_ov = V_DD − V_in − V_TH:\n\nA_v = 2·I_D·R_D / V_ov ≤ **2V_TH / V_ov**\n\nEquivalently, the largest gain in saturation is A_v,max = √(2·k·R_D·V_TH). High gain therefore requires a small overdrive, which means a wide device.\n\n## 5. Illustrative example (assumed values)\n\nSuppose the targets are R_in = 50 Ω and R_out = 500 Ω, with μnCox = 200 µA/V², V_TH = 0.4 V and λ = 0. These numbers are my assumptions, not from your figure.\n\n- R_D = 500 Ω and g_m = 1/50 Ω = 20 mS\n- I_D,max = V_TH/R_D = 0.4 V / 500 Ω = **0.8 mA**\n- W/L = g_m² / (2·μnCox·I_D) = **1250**\n- A_v = g_m·R_D = **10**\n\n## Summary\n\nThe circuit is a non-inverting amplifier with low input impedance (≈1/g_m), output impedance ≈R_D, and gain g_m·R_D. Tying the gate to V_DD restricts the drop across R_D to at most V_TH, which caps the gain at 2V_TH/V_ov.\n\nIf you have specific values or a particular quantity to find, send them and I can work through the numbers.",
        "format": "markdown",
        "sha256": "7bf1dfe00ee0cf2c3217263cb3238a6b0b7ca53109884e23f3612771c7b73f52"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the non-inverting gain and approximately 1/gm input resistance, with a valid finite-ro refinement. The additional DC analysis does not contradict the essential result.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 6465,
        "total_tokens": 7700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5039,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 6465,
        "total_tokens": 7700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5039,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** this is meant to be a common‑gate amplifier, but because the source of M₁ is wired directly to ground, the input signal is shorted out and the small‑signal gain is zero.\n\n**1. Intended function**\n\nThe gate is held at a DC bias V_b, the input is capacitively coupled to the source through C₁, and the output is taken at the drain across R_D. That is the common‑gate topology.\n\n**2. DC (bias) analysis**\n\nC₁ is an open circuit at DC, so:\n\n- V_S = 0, hence V_GS = V_b\n- I_D = ½ μₙC_ox (W/L)(V_b − V_TH)², assuming saturation and λ = 0\n- V_out(DC) = V_DD − I_D·R_D\n- M₁ is in saturation if V_DD − I_D·R_D ≥ V_b − V_TH\n\nSo the transistor can be biased properly and has a finite transconductance g_m = μₙC_ox (W/L)(V_b − V_TH). The bias is not the problem.\n\n**3. Small‑signal analysis**\n\nV_DD and V_b are AC grounds. The source node is tied to ground by a wire, so its voltage is zero regardless of v_in:\n\n- v_s = 0 and v_g = 0, so v_gs = 0\n- i_d = g_m·v_gs = 0\n- v_out = −i_d·R_D = 0\n\n**A_v = v_out / v_in = 0**\n\nThe signal source only sees C₁ connected to ground, so Z_in = 1/(jωC₁). All the signal current, i = jωC₁·v_in, flows into the ground connection and none enters the transistor. Looking into the output, R_out = R_D (or R_D ∥ r_o if λ ≠ 0).\n\n**4. Conclusion and fix**\n\nThe circuit sets a valid bias current but does not amplify; V_out simply sits at V_DD − I_D·R_D.\n\nTo make it work, the source needs a DC path to ground that does not short the signal. Replace the wire from source to ground with a resistor R_S or a current source, and choose V_b to account for the resulting DC drop at the source. With an ideal input source and λ = 0, the circuit then gives:\n\n- A_v = +g_m·R_D (non‑inverting)\n- R_in = (1/g_m) ∥ R_S ≈ 1/g_m\n- R_out = R_D",
        "format": "markdown",
        "sha256": "6248623c80c0f0fa8b5b2f016b01f0ca6ae87329f7d40d5fd340122136e1a9c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that M₁’s source is hard-shorted to ground, so the input produces no small-signal source voltage and the ideal gain is zero. The additional bias and repair discussion does not contradict this conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 3845,
        "total_tokens": 5751,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 3845,
        "total_tokens": 5751,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** this is an intended common-gate (CG) amplifier that is biased correctly but has zero signal gain, because the source of M₁ (the input node) is tied directly to ground.\n\n**1. DC (bias) analysis**\n\nAt DC, C₁ is an open circuit, so V_in has no effect on the bias.\n\n- The source is at ground and the gate is at V_b, so V_GS = V_b.\n- If V_b > V_TH and M₁ is in saturation,\n\n  I_D = ½ μₙC_ox (W/L)(V_b − V_TH)²\n\n- The DC output voltage is V_out = V_DD − I_D R_D.\n- Saturation requires V_DS ≥ V_GS − V_TH, i.e. V_DD − I_D R_D ≥ V_b − V_TH.\n\nSo the transistor carries a well-defined bias current and has a nonzero transconductance, g_m = μₙC_ox (W/L)(V_b − V_TH) = 2I_D/(V_b − V_TH).\n\n**2. Small-signal (AC) analysis**\n\n- The gate is at AC ground, since V_b is a constant voltage: v_g = 0.\n- The source is wired directly to ground: v_s = 0, regardless of v_in.\n\nTherefore v_gs = 0, the dependent source g_m·v_gs is zero, and the drain current does not change:\n\nv_out = 0, so A_v = v_out / v_in = 0\n\nThe input source only sees C₁ connected to ground (Z_in = 1/(sC₁)). All of the signal current i = sC₁·v_in flows into the ground connection and none enters the transistor. M₁ behaves as a constant current source, and V_out stays at V_DD − I_D R_D. The output resistance is R_D ∥ r_o.\n\n**3. Conclusion and fix**\n\nThe ground connection provides the DC path needed for the bias current, but it also shorts the input signal to ground, so the circuit does not amplify.\n\nTo make it work, the source needs a DC path that is not an AC short. Replace the direct ground connection with a resistor R₁ (or a current source) from source to ground. Then, with C₁ acting as a short at signal frequencies and neglecting r_o:\n\n- Input resistance: R_in = R₁ ∥ (1/g_m)\n- Gain with an ideal signal source: A_v = +g_m R_D\n- Gain with source resistance R_S: A_v = [R₁ ∥ (1/g_m)] / [R_S + R₁ ∥ (1/g_m)] · g_m R_D",
        "format": "markdown",
        "sha256": "f4e29a0e311d6ef160e349bda84d8a78e376bcf1eee2e202651ee67a58382987"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source is hard-shorted to ground, so the input signal cannot modulate the transistor and the ideal voltage gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 3543,
        "total_tokens": 5449,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2694,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 3543,
        "total_tokens": 5449,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2694,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** this is meant to be a common-gate (CG) amplifier with an ac-coupled input, but because the source of M₁ is tied directly to ground, the input signal is shorted out and the voltage gain is zero.\n\n## 1. DC (bias) analysis\n\nC₁ is an open circuit at DC, so the signal source does not affect the bias.\n\n- Source at 0 V and gate at V_b, so V_GS = V_b.\n- If V_b > V_TH and M₁ is saturated (neglecting channel-length modulation):\n\n  I_D = ½ μₙC_ox (W/L)(V_b − V_TH)²\n\n- V_out(DC) = V_DD − I_D R_D\n- Saturation requires V_DD − I_D R_D ≥ V_b − V_TH.\n- g_m = μₙC_ox (W/L)(V_b − V_TH) = 2I_D/(V_b − V_TH)\n\nSo the transistor can be biased properly, with a well-defined current and transconductance.\n\n## 2. Small-signal analysis\n\n- V_DD and V_b are constant, so both are ac grounds.\n- The source node is hard-wired to ground, so its voltage is zero whatever v_in does.\n\nTherefore\n\nv_gs = v_g − v_s = 0 − 0 = 0, so i_d = g_m v_gs = 0 and v_out = −i_d R_D = 0.\n\n**A_v = v_out / v_in = 0**\n\nThe signal source only sees C₁ connected to ground, so Z_in = 1/(sC₁). All the signal current, i = C₁ dv_in/dt, flows straight into ground and none enters the transistor. The output resistance is still R_D ∥ r_o ≈ R_D, but no signal reaches the output.\n\n## 3. Why it fails and how to fix it\n\nA CG stage amplifies only if the input can change the source voltage. Here the source is tied to a zero-impedance node, so the input cannot move it.\n\nThe source needs a DC path to ground that still presents a finite impedance to the signal. A resistor R_S (or a current source) between the source and ground does this:\n\n- **Bias:** V_GS = V_b − I_D R_S, solved together with the square-law equation.\n- **Input resistance:** R_in = R_S ∥ (1/g_m).\n- **Gain with an ideal source:**\n\n  v_out/v_in = g_m R_D · sC₁(R_S ∥ 1/g_m) / [1 + sC₁(R_S ∥ 1/g_m)]\n\n  which approaches g_m R_D at frequencies where C₁ acts as a short.\n- **Gain with source resistance R_sig (midband):**\n\n  v_out/v_in = [(R_S ∥ 1/g_m) / (R_sig + R_S ∥ 1/g_m)] · g_m R_D",
        "format": "markdown",
        "sha256": "fe3bf8278fbcc7541613c1b0c9821d7f7e1435fb699bce31b97c3c2f459af5a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer notices that the source is directly shorted to ground, so the input cannot create a small-signal source voltage and the ideal voltage gain is zero, as required for full credit.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 4746,
        "total_tokens": 6652,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 4746,
        "total_tokens": 6652,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The circuit has two poles.**\n\n- **C_SB plays no role.** Both of its terminals are at ground (the source is grounded), so it is shorted out.\n- **The remaining three capacitors form a loop.** C_GS (gate to ground), C_GD (gate to drain) and C_DB (drain to ground) satisfy V_GS = V_GD + V_DB, so only two of the three capacitor voltages are independent. Two independent initial conditions give a second-order system.\n\nThe exact transfer function confirms this:\n\n$$\\frac{V_{out}}{V_{in}}(s)=\\frac{(C_{GD}s-g_m)R_D}{as^2+bs+1}$$\n\nwhere\n\n- a = R_S R_D (C_GS C_GD + C_GS C_DB + C_GD C_DB)\n- b = (1 + g_m R_D) C_GD R_S + R_S C_GS + R_D (C_GD + C_DB)\n\nThe denominator is second order, so there are two poles (plus one zero at s = g_m/C_GD from the feedforward path through C_GD).",
        "format": "markdown",
        "sha256": "1458caf195bbf02c505f32d9d94a633d1dbd9f032c18d273145c150143ee629a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that C_SB is grounded at both terminals and that the other three capacitors have only two independent voltages, yielding two poles. The second-order transfer-function denominator is consistent with this conclusion.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2128,
        "output_tokens": 1341,
        "total_tokens": 3469,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2128,
        "output_tokens": 1341,
        "total_tokens": 3469,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The circuit has two poles.**\n\n- **C_SB plays no role.** Both of its terminals are at ground (the source is grounded), so it is shorted out.\n\n- **The other three capacitors form a loop.** C_GS (gate to ground), C_GD (gate to drain) and C_DB (drain to ground) satisfy V_CGS = V_CGD + V_CDB by KVL. Once two of the voltages are set, the third is fixed, so there are only two independent initial conditions (state variables).\n\nThe number of poles equals the number of independent energy-storage elements, so the circuit is second-order. This agrees with the standard transfer function of this common-source stage:\n\n$$\\frac{V_{out}}{V_{in}}(s)=\\frac{(C_{GD}s-g_m)R_D}{R_SR_D\\,(C_{GS}C_{GD}+C_{GS}C_{DB}+C_{GD}C_{DB})\\,s^2+\\big[R_S(1+g_mR_D)C_{GD}+R_SC_{GS}+R_D(C_{GD}+C_{DB})\\big]s+1}$$\n\nThe denominator is quadratic in s, giving two poles (the numerator also gives one zero, at s = g_m/C_GD).",
        "format": "markdown",
        "sha256": "4f7bf52adb79c6816ed890e8db56e2ff6fd2cef70052e39bfc765996d3647ca1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count from the capacitors: C_SB is grounded at both terminals, and the other three capacitors have only two independent voltages. The quadratic denominator is consistent with this result.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2128,
        "output_tokens": 1014,
        "total_tokens": 3142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 599,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2128,
        "output_tokens": 1014,
        "total_tokens": 3142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 599,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The circuit has two poles.**\n\n- **C_SB plays no role.** Both of its terminals are grounded (the source is tied to ground), so it is shorted out.\n- **The remaining three capacitors are not independent.** C_GS (gate to ground), C_GD (gate to drain) and C_DB (drain to ground) form a closed loop, so by KVL the voltage on any one is fixed by the other two (for example, V_GD = V_GS − V_DB). Only two capacitor voltages can be set independently, so the circuit is second order.\n\nThe transfer function of this common-source stage (the standard result, quoted rather than derived here) confirms this, with a second-order denominator:\n\n$$\\frac{V_{out}}{V_{in}}(s)=\\frac{(C_{GD}s-g_m)R_D}{R_SR_D\\left(C_{GS}C_{GD}+C_{GS}C_{DB}+C_{GD}C_{DB}\\right)s^2+\\left[R_S(1+g_mR_D)C_{GD}+R_SC_{GS}+R_D(C_{GD}+C_{DB})\\right]s+1}$$\n\nSo there are two poles, plus one zero at s = g_m/C_GD.",
        "format": "markdown",
        "sha256": "5518d71087cc3be1f50def43584233d1df952b49111733947e96c2a602a398fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies C_SB as shorted and the other capacitors as having only two independent voltages, establishing two poles. The zero does not change the pole count.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2128,
        "output_tokens": 1241,
        "total_tokens": 3369,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 836,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2128,
        "output_tokens": 1241,
        "total_tokens": 3369,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 836,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Assumptions:** small-signal analysis, λ = 0, no body effect, and R1 + R2 ≫ RD so the divider does not load the output (the general case is given at the end).\n\n**1. Identifying the feedback loop**\n\n- **Forward amplifier:** M1 and RD form a common-gate stage (input at the source, output at the drain).\n- **Sense and feedback network:** R1 and R2 sit across the output, so they sense the output voltage and return V_F = βV_out, with β = R2/(R1 + R2).\n- **Subtractor:** M1 itself. Its drain current depends on v_GS = V_F − V_in, so the feedback voltage is subtracted from the input.\n\nA voltage is sensed and a voltage is returned, so this is voltage-voltage (series-shunt) feedback.\n\n**2. Polarity**\n\nIf V_in rises, V_GS falls, I_D falls, and V_out rises. Then V_F rises, which increases V_GS and opposes the original change. The feedback is negative.\n\n**3. Open-loop quantities (gate at AC ground)**\n\n- A0 = g_m·RD (non-inverting)\n- R_in,open = 1/g_m\n- R_out,open = RD\n\n**4. Loop gain**\n\nBreak the loop at the gate, apply a test voltage V_t there, and set V_in = 0. Then V_out = −g_m·RD·V_t and V_F = −β·g_m·RD·V_t, so\n\nT = βA0 = g_m·RD·R2/(R1 + R2)\n\n**5. Closed-loop results**\n\n- **Gain:** V_out/V_in = g_m·RD / [1 + g_m·RD·R2/(R1 + R2)]\n- **Input resistance:** R_in = (1/g_m)·[1 + g_m·RD·R2/(R1 + R2)] (raised by 1 + T)\n- **Output resistance:** R_out = RD / [1 + g_m·RD·R2/(R1 + R2)] (lowered by 1 + T)\n\n**6. Check by direct analysis**\n\nKCL at the drain gives −V_out/RD = g_m(βV_out − V_in), so V_out/V_in = g_m·RD/(1 + β·g_m·RD), which matches.\n\nThe input current is I_in = g_m(V_in − βV_out) = g_m·V_in/(1 + β·g_m·RD), which gives the same R_in.\n\n**7. Large loop gain limit**\n\nIf β·g_m·RD ≫ 1:\n\n- V_out/V_in ≈ 1/β = 1 + R1/R2, like an op-amp non-inverting amplifier, set by a resistor ratio rather than by g_m or RD.\n- R_in ≈ β·RD\n- R_out ≈ 1/(β·g_m)\n\n**8. If the divider loading is not negligible**\n\nReplace RD with R_L = RD ‖ (R1 + R2) in every expression above. For example, V_out/V_in = g_m·R_L/(1 + β·g_m·R_L) and R_out = R_L ‖ 1/(β·g_m).\n\n**9. Bias note**\n\nAt DC, V_G = βV_D < V_D, so M1 is always in saturation when it is on. The input DC level must be low enough that V_GS = βV_out − V_in exceeds V_TH.",
        "format": "markdown",
        "sha256": "8ff988ae6018aab647da0050b3ee4f4f517ba621bb8bdd8ad47b660ed3d61f00"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback; its closed-loop gain is also correct. The extra resistance and bias discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1774,
        "output_tokens": 7325,
        "total_tokens": 9099,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6222,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1774,
        "output_tokens": 7325,
        "total_tokens": 9099,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6222,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure gives no specific question, so I'll assume the usual one for this circuit: find the gain and the input and output resistances. I take λ = 0, no body effect, low frequency, and R₁ + R₂ ≫ R_D (the exact result is noted at the end).\n\n## What the circuit is\n\nThis is a common-gate stage with negative voltage-voltage (series-shunt) feedback.\n\n- **Forward amplifier:** M₁ and R_D form a common-gate stage, with the input at the source and the output at the drain.\n- **Sense and feedback network:** R₁ and R₂ sense V_out and return a fraction to the gate: V_F = K·V_out, where K = R₂/(R₁+R₂).\n- **Subtractor:** M₁ itself, because its drain current depends on V_GS = V_F − V_in.\n- **Polarity:** If V_out rises, V_F rises, I_D increases, the drop across R_D grows, and V_out falls. The feedback is negative.\n\nOn bias: the gate sits at a fraction of the drain voltage, so V_G < V_D and M₁ is always in saturation when it is on.\n\n## Voltage gain\n\nWith the gate at AC ground (open loop), the stage is a plain common-gate amplifier:\n\nA₀ = g_m R_D\n\nWith the loop closed, KCL at the output gives v_out/R_D + g_m(K·v_out − v_in) = 0, so\n\n**A_v = v_out/v_in = g_m R_D / (1 + g_m R_D · R₂/(R₁+R₂))**\n\nThis has the form A₀/(1 + K·A₀), with loop gain K·A₀ = g_m R_D R₂/(R₁+R₂).\n\n## Input resistance\n\nApply v_X at the source, with i_X flowing in. This current flows through R_D, so v_out = i_X R_D and v_F = K·i_X R_D. Then i_X = g_m(v_X − K·R_D·i_X), which gives\n\n**R_in = (1/g_m)·(1 + g_m R_D · R₂/(R₁+R₂))**\n\nThe open-loop value 1/g_m is raised by the factor (1 + loop gain).\n\n## Output resistance\n\nSet v_in = 0 and apply v_X at the drain. Then v_GS = K·v_X and i_X = v_X/R_D + g_m K·v_X, which gives\n\n**R_out = R_D / (1 + g_m R_D · R₂/(R₁+R₂))**\n\nThe open-loop value R_D is lowered by the same factor. Equivalently, R_out = R_D ‖ 1/(g_m K).\n\n## Remarks\n\n- **Large loop gain** (g_m R_D K ≫ 1):\n  - A_v ≈ 1 + R₁/R₂, set only by the resistor ratio.\n  - R_in ≈ R_D·R₂/(R₁+R₂).\n  - R_out ≈ (1/g_m)(1 + R₁/R₂).\n- **Without the assumption R₁ + R₂ ≫ R_D:** replace R_D by R_D ‖ (R₁+R₂) in every expression. For example, A_v = g_m R_D (R₁+R₂) / (R₁ + R₂ + R_D + g_m R_D R₂).",
        "format": "markdown",
        "sha256": "0500cf36567698adf7ff17aa434d1989b67aa0e67395cd9ac7b68713276b6b65"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative-feedback polarity. The closed-loop gain is correct, including the finite-load expression; the additional resistance analysis is not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1774,
        "output_tokens": 8954,
        "total_tokens": 10728,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1774,
        "output_tokens": 8954,
        "total_tokens": 10728,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Assumptions.** The figure comes with no specific question, so I give the standard low-frequency small-signal analysis, with M1 in saturation and λ = γ = 0.\n\n## 1. What the circuit is\n\nThis is a common-gate stage (input at the source, output at the drain) inside a negative-feedback loop.\n\n- **Forward amplifier:** M1 and R_D.\n- **Feedback network:** the divider R1, R2 senses V_out and returns V_F = βV_out to the gate, with β = R2/(R1+R2).\n- **Subtractor:** M1 itself, since its drain current depends on V_GS: i_d = g_m(V_F − V_in).\n\nThe feedback is negative: if V_in rises, V_GS falls, I_D falls, V_out rises, V_F rises, and V_GS is partly restored. Because the output voltage is sensed and a voltage is returned in series with the input, this is voltage-voltage (series-shunt) feedback.\n\n## 2. Loop gain\n\nSet V_in = 0 and break the loop at the gate (it draws no current, so nothing is loaded). Apply V_t at the gate:\n\n- V_out = −g_m V_t [R_D ‖ (R1+R2)]\n- V_F = V_out · R2/(R1+R2)\n\nLoop gain:\n\nT = −V_F/V_t = g_m [R_D ‖ (R1+R2)] · R2/(R1+R2) = **g_m R_D R2 / (R_D + R1 + R2)**\n\n## 3. Closed-loop gain\n\nKCL at the output node:\n\nV_out/R_D + V_out/(R1+R2) + g_m(βV_out − V_in) = 0\n\nWith open-loop gain A = g_m [R_D ‖ (R1+R2)], this gives\n\nV_out/V_in = A/(1 + βA) = **g_m R_D (R1+R2) / (R_D + R1 + R2 + g_m R_D R2)**\n\n- The gain is non-inverting.\n- If R1+R2 ≫ R_D, then A_v ≈ g_m R_D / (1 + g_m R_D R2/(R1+R2)).\n- If T ≫ 1, then A_v ≈ 1/β = 1 + R1/R2, set by the resistor ratio and independent of g_m and R_D.\n\n## 4. Input and output resistance\n\n**Input.** The current drawn from the source is i_in = g_m(V_in − V_F) = g_m V_in/(1+T), so\n\nR_in = (1+T)/g_m = **1/g_m + R_D R2/(R_D + R1 + R2)**\n\nThis is the plain common-gate value 1/g_m raised by the factor 1+T.\n\n**Output.** With V_in = 0 and a test voltage at the output, i_x = V_x[1/R_D + 1/(R1+R2) + g_m β], so\n\nR_out = R_D ‖ (R1+R2) ‖ (1/(g_m β)) = **[R_D ‖ (R1+R2)] / (1+T)**\n\nThis is the open-loop value lowered by 1+T.\n\n## 5. Bias\n\nThe DC operating point follows from\n\n- (V_DD − V_out)/R_D = I_D + V_out/(R1+R2)\n- I_D = ½ μnCox (W/L)(βV_out − V_in − V_TH)²\n\nSince V_G = βV_out < V_D, the condition V_D ≥ V_G − V_TH always holds. M1 is therefore in saturation whenever it is on, which requires βV_out − V_in > V_TH.\n\n## 6. With r_O and body effect\n\nWriting R_L = R_D ‖ (R1+R2):\n\nA_v = [(g_m + g_mb) r_O + 1] R_L / (r_O + R_L + g_m β r_O R_L)\n\nThis reduces to the usual common-gate gain when β = 0.",
        "format": "markdown",
        "sha256": "bd3fb648c8dd1d8ccb06f9e1a1a0270662507680dac5b8619871ebb79462c04a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. Its closed-loop gain is algebraically equivalent to the golden result; extra analyses are not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1774,
        "output_tokens": 8785,
        "total_tokens": 10559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7503,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1774,
        "output_tokens": 8785,
        "total_tokens": 10559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7503,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nThis is a **source follower (common-drain stage)** with a current-source load. No component values are given, so the analysis below is symbolic.\n\n- **M1**: drain at V_DD, gate driven by V_in, output taken at the source. It is the follower device.\n- **M2**: gate at a fixed bias V_b, source grounded. It acts as a constant current source that biases M1.\n\n## Large-signal (bias) behaviour\n\n**Bias current**, set by M2 in saturation:\n\nI₁ = ½ μₙC_ox (W/L)₂ (V_b − V_TH2)² (1 + λ₂V_out)\n\nM2 stays saturated as long as V_out ≥ V_b − V_TH2.\n\n**Output level.** M1 must carry the same current, so its gate-source voltage is fixed:\n\nV_out = V_in − V_GS1 = V_in − V_TH1 − √(2I₁ / (μₙC_ox (W/L)₁))\n\nThe output follows the input, shifted down by a nearly constant V_GS1.\n\n**Operating regions:**\n\n- V_in < V_TH1: M1 is off, M2 is in deep triode carrying no current, and V_out = 0.\n- V_in slightly above V_TH1: M2 is in triode and behaves as a resistor, so the gain is well below 1.\n- V_in ≥ V_GS1 + (V_b − V_TH2): both devices are saturated and the circuit works as a follower.\n- M1 stays saturated as long as V_in ≤ V_DD + V_TH1, which in practice is always true.\n\n**Body effect.** If M1's bulk is grounded, V_SB1 = V_out, so\n\nV_TH1 = V_TH0 + γ(√(2Φ_F + V_out) − √(2Φ_F))\n\nThe level shift then grows with V_out, which makes the slope less than 1 and slightly nonlinear.\n\n## Small-signal analysis\n\nSince v_gs2 = 0, M2 reduces to r_o2 from the output to ground. For M1, v_gs1 = v_in − v_out and v_bs1 = −v_out. KCL at the output gives:\n\ng_m1(v_in − v_out) − g_mb1·v_out = v_out / (r_o1 ∥ r_o2)\n\n**Voltage gain:**\n\nA_v = g_m1(r_o1 ∥ r_o2) / [1 + (g_m1 + g_mb1)(r_o1 ∥ r_o2)]\n\nThis is equivalent to a voltage divider between 1/g_m1 and (1/g_mb1 ∥ r_o1 ∥ r_o2).\n\nSpecial cases:\n\n- No body effect: A_v = (r_o1 ∥ r_o2) / (1/g_m1 + r_o1 ∥ r_o2), which is approximately 1.\n- λ = 0: A_v = g_m1 / (g_m1 + g_mb1) = 1/(1 + η), typically about 0.8 to 0.9.\n- λ = 0 and γ = 0: A_v = 1.\n\nThe gain is positive, so the stage is non-inverting.\n\n**Input resistance:** R_in = ∞ at low frequency, because the input is a gate.\n\n**Output resistance:**\n\nR_out = (1/g_m1) ∥ (1/g_mb1) ∥ r_o1 ∥ r_o2 ≈ 1/(g_m1 + g_mb1)\n\n## Conclusions\n\n- The circuit is a **voltage buffer and level shifter**: gain close to but below 1, very high input impedance, low output impedance, and a DC shift of V_GS1 downward.\n- The current source keeps I_D1, and hence V_GS1, independent of V_in. This gives better linearity and higher gain than a resistor-biased follower.\n- Limitations:\n  - Body effect makes the gain less than 1 and introduces nonlinearity.\n  - Headroom is lost: V_in,min = V_GS1 + V_OD2, and V_out,max ≈ V_DD − V_GS1.\n  - The stage can sink at most I₁, so the falling slew rate into a capacitive load C_L is limited to I₁/C_L.\n  - M2 adds noise. The input-referred thermal noise is 4kTγ(1/g_m1 + g_m2/g_m1²) per unit bandwidth.",
        "format": "markdown",
        "sha256": "d8f100af04d1ccbea421baf27231ddb5f07cf553defe0be5518882df2adceb97"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as its current-source load, and derives the positive gain below unity, including body effect and output resistance.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1297,
        "output_tokens": 7052,
        "total_tokens": 8349,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5607,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1297,
        "output_tokens": 7052,
        "total_tokens": 8349,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5607,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nThis is an **NMOS source follower (common-drain stage) biased by a current source**:\n\n- **M₁** is the follower: the input drives its gate, its drain is tied to V_DD, and the output is taken at its source.\n- **M₂** has a fixed gate voltage V_b and a grounded source, so it acts as a constant-current source that sets the bias current of M₁.\n\n## DC (bias) analysis\n\nWith M₂ in saturation, the bias current is\n\n$$I_{D2}=\\tfrac12\\mu_nC_{ox}\\left(\\frac{W}{L}\\right)_2 (V_b-V_{TH2})^2 = I_{D1}$$\n\nSince M₁ carries the same current, its gate-source voltage is fixed:\n\n$$V_{out}=V_{in}-V_{GS1}=V_{in}-V_{TH1}-\\sqrt{\\frac{2I_{D}}{\\mu_nC_{ox}(W/L)_1}}$$\n\nSo the output follows the input with a constant downward level shift of V_GS1.\n\nSaturation conditions:\n- M₁: V_DS1 ≥ V_GS1 − V_TH1, i.e. V_in ≤ V_DD + V_TH1. This always holds for V_in ≤ V_DD.\n- M₂: V_out ≥ V_b − V_TH2, i.e. V_in ≥ V_GS1 + V_OV2, where V_OV2 = V_b − V_TH2.\n\n## Small-signal analysis\n\nM₂ has v_gs2 = 0, so it reduces to its output resistance r_O2 from the output node to ground. The resistance r_O1 connects the output to V_DD, which is ac ground. So the total resistance from the output node to ac ground is r_O1 ∥ r_O2.\n\nKCL at the output, with v_gs1 = v_in − v_out:\n\n$$g_{m1}(v_{in}-v_{out})=\\frac{v_{out}}{r_{O1}\\parallel r_{O2}}$$\n\n**Voltage gain**\n\n$$A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}(r_{O1}\\parallel r_{O2})}{1+g_{m1}(r_{O1}\\parallel r_{O2})}=\\frac{r_{O1}\\parallel r_{O2}}{\\dfrac{1}{g_{m1}}+r_{O1}\\parallel r_{O2}}$$\n\nThis is a voltage divider between 1/g_m1 and r_O1 ∥ r_O2. Because r_O1 ∥ r_O2 ≫ 1/g_m1, the gain is positive and slightly less than 1. If λ = 0, the gain is exactly 1.\n\n**Input resistance:** R_in = ∞ at low frequency, since the input is a MOS gate.\n\n**Output resistance**\n\n$$R_{out}=\\frac{1}{g_{m1}}\\parallel r_{O1}\\parallel r_{O2}\\approx\\frac{1}{g_{m1}}$$\n\n**Body effect:** if M₁'s body is grounded rather than tied to its source, a term 1/g_mb1 appears in parallel at the output:\n\n$$A_v=\\frac{g_{m1}}{g_{m1}+g_{mb1}+\\dfrac{1}{r_{O1}\\parallel r_{O2}}}$$\n\nThis lowers the gain somewhat further below unity.\n\n## Summary\n\nThe circuit is a unity-gain, non-inverting voltage buffer and level shifter. It has high input impedance, low output impedance (about 1/g_m1), and a gain of about 1, with the current source M₂ setting a bias current that does not depend on V_in.",
        "format": "markdown",
        "sha256": "db85369dd999123f9e2e7578d16b2cdb29d068c0d83650ca5ceeb41a53c8b4a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as the source follower and M₂ as its current-source load, and gives a positive gain at or slightly below unity. The small-signal expression and body-effect refinement are consistent with the golden solution.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1297,
        "output_tokens": 2915,
        "total_tokens": 4212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1674,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1297,
        "output_tokens": 2915,
        "total_tokens": 4212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1674,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nThis is an NMOS **source follower (common-drain stage)**. M₁ is the amplifying device: input at its gate, output at its source, drain at V_DD. M₂, with its gate at the fixed bias V_b, acts as a **current-source load** that sets the bias current.\n\n## Large-signal (bias) behaviour\n\nM₂ in saturation sets the current:\n\n$$I_{D2}=\\tfrac12\\mu_nC_{ox}\\left(\\tfrac{W}{L}\\right)_2(V_b-V_{TH2})^2(1+\\lambda_2V_{out})$$\n\nThe same current flows through M₁:\n\n$$I_{D1}=\\tfrac12\\mu_nC_{ox}\\left(\\tfrac{W}{L}\\right)_1(V_{in}-V_{out}-V_{TH1})^2\\,[1+\\lambda_1(V_{DD}-V_{out})]$$\n\nSetting I_D1 = I_D2 and neglecting λ:\n\n$$V_{out}=V_{in}-V_{TH1}-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\,(V_b-V_{TH2})$$\n\nSo the output follows the input with a downward level shift of V_GS1 = V_TH1 + V_OV1.\n\nIf M₁'s bulk is grounded, V_SB1 = V_out, so its threshold depends on the output:\n\n$$V_{TH1}=V_{TH0}+\\gamma\\left(\\sqrt{2\\Phi_F+V_{out}}-\\sqrt{2\\Phi_F}\\right)$$\n\n**Operating limits**\n\n- M₁ is saturated whenever V_in ≤ V_DD + V_TH1, which holds for any V_in ≤ V_DD.\n- M₂ is saturated when V_out ≥ V_b − V_TH2 = V_OV2.\n- Minimum input: V_in,min = V_TH1 + V_OV1 + V_OV2.\n- Output range (for V_in ≤ V_DD): V_OV2 ≤ V_out ≤ V_DD − V_GS1.\n\n## Small-signal analysis\n\nM₂ has v_gs2 = 0, so it reduces to r_o2. For M₁, v_gs1 = v_in − v_out and v_bs1 = −v_out. KCL at the output node:\n\n$$g_{m1}(v_{in}-v_{out})-g_{mb1}v_{out}-\\frac{v_{out}}{r_{o1}}=\\frac{v_{out}}{r_{o2}}$$\n\n**Voltage gain**\n\n$$A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}}{g_{m1}+g_{mb1}+\\dfrac1{r_{o1}}+\\dfrac1{r_{o2}}}=\\frac{g_{m1}\\left(\\tfrac1{g_{mb1}}\\|r_{o1}\\|r_{o2}\\right)}{1+g_{m1}\\left(\\tfrac1{g_{mb1}}\\|r_{o1}\\|r_{o2}\\right)}$$\n\n- The gain is non-inverting and always less than 1.\n- If λ = 0: A_v = g_m1/(g_m1 + g_mb1) = 1/(1 + η), where η = γ / (2√(2Φ_F + V_SB)). This is typically about 0.75–0.9.\n- If λ = 0 and γ = 0: A_v = 1.\n- With an external load R_L, add R_L in parallel with r_o1 ∥ r_o2.\n\n**Output resistance**\n\n$$R_{out}=\\frac1{g_{m1}}\\Big\\|\\frac1{g_{mb1}}\\Big\\|r_{o1}\\Big\\|r_{o2}\\approx\\frac1{g_{m1}+g_{mb1}}$$\n\n**Input resistance**\n\nR_in → ∞ at low frequency, since the input is a MOS gate.\n\n## Key observations\n\n- **Use:** a voltage buffer and level shifter with high input impedance and low output impedance (about 1/g_m).\n- **Nonlinearity:** η depends on V_out through the body effect, and r_o1, r_o2 depend on V_DS, so the gain varies with signal level. A PMOS follower with its source tied to its n-well removes the body effect.\n- **Headroom:** the V_GS1 drop plus V_OV2 reduces the available signal swing.\n- **Load driving:** a low-resistance load R_L lowers the gain, since A_v ≈ R_L/(R_L + 1/g_m1).\n- **Frequency response (ideal source):**\n\n$$\\frac{v_{out}}{v_{in}}(s)=\\frac{g_{m1}+sC_{GS1}}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}+s(C_{GS1}+C_L)}$$\n\n  The bandwidth is roughly (g_m1 + g_mb1)/(C_GS1 + C_L). The input capacitance is small, about C_GD1 + (1 − A_v)C_GS1, because C_GS1 is bootstrapped.",
        "format": "markdown",
        "sha256": "9e87b70011c1cd1431a0bececccef7becf50a603bb6e2a55260d90bc4db44bb6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, and gives the correct non-inverting gain below unity with appropriate body-effect and output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1297,
        "output_tokens": 5653,
        "total_tokens": 6950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3918,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1297,
        "output_tokens": 5653,
        "total_tokens": 6950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3918,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Identification.** M1 (NMOS, source at ground) and M2 (PMOS, source at V_DD) share the gate node (V_in) and the drain node (V_out). This is the CMOS inverter, which as an amplifier is a complementary (push-pull) common-source stage. The question is open-ended, so I cover both the large-signal and small-signal behaviour, assuming square-law devices with bodies tied to sources.\n\nHere V_GS1 = V_in and |V_GS2| = V_DD − V_in. When V_in rises, M1 sinks more current and M2 sources less, so both actions pull V_out down and the stage inverts.\n\n## 1. Large-signal (DC) transfer characteristic\n\nLet k_n = μ_nC_ox(W/L)₁ and k_p = μ_pC_ox(W/L)₂, take λ = 0, and set I_D1 = |I_D2| (no DC load).\n\n| Region | V_in | M1 | M2 | V_out |\n|---|---|---|---|---|\n| A | V_in < V_THn | off | triode | V_DD |\n| B | V_THn < V_in < V_M | saturation | triode | V_in + \\|V_THp\\| + √[(V_DD − V_in − \\|V_THp\\|)² − (k_n/k_p)(V_in − V_THn)²] |\n| C | V_in = V_M | saturation | saturation | steep transition, from V_M + \\|V_THp\\| down to V_M − V_THn |\n| D | V_M < V_in < V_DD − \\|V_THp\\| | triode | saturation | (V_in − V_THn) − √[(V_in − V_THn)² − (k_p/k_n)(V_DD − V_in − \\|V_THp\\|)²] |\n| E | V_in > V_DD − \\|V_THp\\| | triode | off | 0 |\n\n**Trip point.** Equating the two saturation currents gives\n\nV_M = [V_THn + √(k_p/k_n)·(V_DD − |V_THp|)] / [1 + √(k_p/k_n)]\n\nFor a symmetric design (k_n = k_p, V_THn = |V_THp| = V_TH):\n\n- V_M = V_DD/2\n- V_IL = (3V_DD + 2V_TH)/8 and V_IH = (5V_DD − 2V_TH)/8\n- NM_L = NM_H = (3V_DD + 2V_TH)/8\n\nThe output swings rail to rail, and the static current is zero in regions A and E.\n\n## 2. Small-signal behaviour (both devices saturated, region C)\n\nV_DD is AC ground, so the two transistors appear in parallel. KCL at the output gives (g_m1 + g_m2)v_in + v_out/(r_O1‖r_O2) = 0, so:\n\n- **Gain:** A_v = −(g_m1 + g_m2)(r_O1 ‖ r_O2)\n- **Output resistance:** R_out = r_O1 ‖ r_O2\n- **Input resistance:** infinite at low frequency\n- **Output swing while saturated:** V_in − V_THn ≤ V_out ≤ V_in + |V_THp|\n\nCompared with a common-source stage with a current-source load, the output resistance is the same but the transconductance is higher. With finite λ, the slope of the transfer characteristic at V_M equals this gain.\n\n## 3. Limitations as an amplifier\n\n- **Bias depends on supply and thresholds.** Because V_GS1 + |V_GS2| = V_DD, the bias current at the trip point is I_D = ½·k_n·k_p/(√k_n + √k_p)²·(V_DD − V_THn − |V_THp|)², which varies strongly with process, supply and temperature. A large resistor from output to input is often used to self-bias at V_in = V_out = V_M.\n- **Poor supply rejection.** With V_in held fixed, v_out/v_dd = (g_m2 + 1/r_O2)(r_O1 ‖ r_O2), which is about half the signal gain.\n\n## 4. Frequency response and switching speed\n\n- Input capacitance: C_in ≈ C_GS1 + C_GS2 + (1 + |A_v|)(C_GD1 + C_GD2), due to the Miller effect.\n- Output pole: ω_p ≈ 1/[(r_O1‖r_O2)·C_L,tot]\n- Right-half-plane zero: ω_z = (g_m1 + g_m2)/(C_GD1 + C_GD2)\n- Gain-bandwidth: about (g_m1 + g_m2)/C_L,tot\n- Propagation delay for a step input: T_PHL = R_on1·C_L·[2V_THn/(V_DD − V_THn) + ln(3 − 4V_THn/V_DD)], with R_on1 = 1/[k_n(V_DD − V_THn)]. T_PLH has the same form with M2's parameters.\n\n## 5. Noise and power\n\n- Input-referred thermal noise: V²_n,in = 4kTγ/(g_m1 + g_m2) per Hz. This is lower than with a current-source load, because M2 also amplifies the signal.\n- Dynamic power: P = C_L·V_DD²·f, plus a short-circuit current during transitions that peaks at V_in = V_M.\n\n**Summary.** The circuit is an inverting, rail-to-rail stage with trip point V_M, zero static power as a logic gate, and gain −(g_m1 + g_m2)(r_O1‖r_O2) when biased near V_M.",
        "format": "markdown",
        "sha256": "a444a99f7908d6babc90c1f19d35c320761e7eac8baa2d9b170ad7370511d9f7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and explains its inverting operation. The golden solution grants full credit for this identification; the extra analysis does not contradict it.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 11516,
        "total_tokens": 11842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 11516,
        "total_tokens": 11842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nM₁ is an NMOS with its source at ground, and M₂ is a PMOS with its source at V_DD. Their gates are tied together (V_in) and their drains are tied together (V_out). This is the **CMOS inverter**, which can also be viewed as a complementary common-source amplifier.\n\nNotation: βₙ = μₙC_ox(W/L)₁, βₚ = μₚC_ox(W/L)₂, V_TH1 > 0 for M₁, |V_TH2| for M₂. I assume square-law devices and V_DD > V_TH1 + |V_TH2|.\n\n## Large-signal (DC) behavior\n\n- M₁ is on if V_in > V_TH1, and saturated if V_out ≥ V_in − V_TH1.\n- M₂ is on if V_in < V_DD − |V_TH2|, and saturated if V_out ≤ V_in + |V_TH2|.\n\nSetting I_D1 = I_D2 gives five regions:\n\n| Region | V_in | M₁ | M₂ | V_out |\n|---|---|---|---|---|\n| 1 | V_in < V_TH1 | off | triode, I = 0 | V_DD |\n| 2 | V_TH1 < V_in < V_M | saturation | triode | V_in + \\|V_TH2\\| + √[(V_DD − V_in − \\|V_TH2\\|)² − (βₙ/βₚ)(V_in − V_TH1)²] |\n| 3 | V_in ≈ V_M | saturation | saturation | drops steeply |\n| 4 | V_M < V_in < V_DD − \\|V_TH2\\| | triode | saturation | (V_in − V_TH1) − √[(V_in − V_TH1)² − (βₚ/βₙ)(V_DD − V_in − \\|V_TH2\\|)²] |\n| 5 | V_in > V_DD − \\|V_TH2\\| | triode, I = 0 | off | 0 |\n\nSo a low input gives V_out = V_DD and a high input gives V_out = 0. The output swings rail to rail, and no static current flows in either logic state.\n\n**Switching threshold (trip point).** With both devices saturated, ½βₙ(V_M − V_TH1)² = ½βₚ(V_DD − V_M − |V_TH2|)², so\n\nV_M = [V_DD − |V_TH2| + V_TH1·√(βₙ/βₚ)] / [1 + √(βₙ/βₚ)]\n\nIf βₙ = βₚ and V_TH1 = |V_TH2|, then V_M = V_DD/2. Because μₙ ≈ 2–3 μₚ, this requires (W/L)₂ ≈ 2–3 × (W/L)₁.\n\n**Noise margins** (symmetric case, threshold V_TH, points where the slope is −1):\n\n- V_IL = (3V_DD + 2V_TH)/8\n- V_IH = (5V_DD − 2V_TH)/8\n- NM_L = NM_H = (3V_DD + 2V_TH)/8\n\n## Small-signal behavior (biased near V_M)\n\nBoth sources are at AC ground, so both transistors act as common-source devices whose drain currents add at the output:\n\n- A_v = v_out/v_in = −(g_m1 + g_m2)(r_O1 ‖ r_O2)\n- R_in = ∞ at low frequency\n- R_out = r_O1 ‖ r_O2\n\nWith λ = 0 the transfer curve is vertical at V_M (infinite gain). As an amplifier the gain is high, but the bias point is very sensitive to V_DD and process variations, so it usually needs self-biasing, for example a large feedback resistor from output to input.\n\n## Switching speed (load capacitance C_L, step input)\n\nThe output falls through M₁ (saturation first, then triode) and rises through M₂. The delays to the V_DD/2 point are:\n\n- T_PHL = R_on1·C_L·[2V_TH1/(V_DD − V_TH1) + ln(3 − 4V_TH1/V_DD)], with R_on1 = 1/[βₙ(V_DD − V_TH1)]\n- T_PLH = R_on2·C_L·[2|V_TH2|/(V_DD − |V_TH2|) + ln(3 − 4|V_TH2|/V_DD)], with R_on2 = 1/[βₚ(V_DD − |V_TH2|)]\n\nWider devices or a higher V_DD make it faster; a larger C_L makes it slower.\n\n## Power\n\n- **Static:** ideally zero, since one transistor is always off in each logic state (only leakage remains).\n- **Dynamic:** P = f·C_L·V_DD². Each charging cycle draws C_L·V_DD² from the supply; half is dissipated in M₂ during charging and half in M₁ during discharging.\n- **Short-circuit:** during transitions (V_TH1 < V_in < V_DD − |V_TH2|) both devices conduct briefly. The current peaks at V_in = V_M with I_peak = ½βₙ(V_M − V_TH1)².",
        "format": "markdown",
        "sha256": "9b304cd277a3e2b4ef4bd6ddec1d9c3c8164077b157051e0a99371df819f777f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, and rail-to-rail logic behavior, satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 8441,
        "total_tokens": 8767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6725,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 8441,
        "total_tokens": 8767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6725,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nThis is a **CMOS inverter**, also called a complementary common-source stage. M1 is an NMOS pull-down device with its source at ground, and M2 is a PMOS pull-up device with its source at V_DD. The gates are tied together as the input and the drains are tied together as the output.\n\nIn what follows I assume square-law devices, with βn = μnCox(W/L)₁, βp = μpCox(W/L)₂, and V_DD > V_TH1 + |V_TH2|.\n\n- **Vin = 0:** M1 is off and M2 is on, so Vout = V_DD.\n- **Vin = V_DD:** M1 is on and M2 is off, so Vout = 0.\n\nThe output therefore swings rail-to-rail, and no static current flows in either logic state.\n\n## 1. DC transfer characteristic\n\nM1 is saturated when Vout ≥ Vin − V_TH1. M2 is saturated when Vout ≤ Vin + |V_TH2|. This gives five regions:\n\n| Region | Vin | M1 | M2 | Vout |\n|---|---|---|---|---|\n| 1 | Vin < V_TH1 | off | triode (I = 0) | V_DD |\n| 2 | V_TH1 < Vin < V_M | saturation | triode | slightly below V_DD |\n| 3 | Vin ≈ V_M | saturation | saturation | falls steeply |\n| 4 | V_M < Vin < V_DD − \\|V_TH2\\| | triode | saturation | near 0 |\n| 5 | Vin > V_DD − \\|V_TH2\\| | triode (I = 0) | off | 0 |\n\nSetting I_D1 = I_D2 gives the curve in each region:\n\n- **Region 2:** ½βn(Vin − V_TH1)² = ½βp[2(V_DD − Vin − |V_TH2|)(V_DD − Vout) − (V_DD − Vout)²]\n- **Region 4:** ½βn[2(Vin − V_TH1)Vout − Vout²] = ½βp(V_DD − Vin − |V_TH2|)²\n\n## 2. Switching threshold (trip point)\n\nAt the trip point Vin = Vout = V_M and both devices are saturated:\n\n½βn(V_M − V_TH1)² = ½βp(V_DD − V_M − |V_TH2|)²\n\n**V_M = [V_DD − |V_TH2| + √(βn/βp)·V_TH1] / [1 + √(βn/βp)]**\n\nIf βn = βp and V_TH1 = |V_TH2|, then V_M = V_DD/2. Achieving βn = βp requires (W/L)₂ ≈ (μn/μp)(W/L)₁, roughly 2–3 times wider.\n\n## 3. Small-signal gain around V_M\n\nBoth transistors act as common-source devices driving the same node, so their transconductances add and their output resistances appear in parallel:\n\n**Av = −(gm1 + gm2)(ro1 ‖ ro2)**\n\nRin = ∞ at low frequency, and Rout = ro1 ‖ ro2.\n\nWith λ = 0 the transfer curve is vertical at V_M (infinite gain). With channel-length modulation the slope is finite but large.\n\n## 4. Noise margins\n\nThe noise margins are set by the points where the slope is −1. For the symmetric case (βn = βp, V_TH1 = |V_TH2| = V_TH):\n\n- V_IL = (3V_DD + 2V_TH)/8\n- V_IH = (5V_DD − 2V_TH)/8\n- NM_L = NM_H = (3V_DD + 2V_TH)/8, since V_OL = 0 and V_OH = V_DD\n\n## 5. Switching speed with load C_L\n\nFor a step input, the active device first works in saturation and then in triode until Vout reaches V_DD/2:\n\n- T_PHL = R_on1·C_L·[2V_TH1/(V_DD − V_TH1) + ln(3 − 4V_TH1/V_DD)], with R_on1 = 1/[βn(V_DD − V_TH1)]\n- T_PLH = R_on2·C_L·[2|V_TH2|/(V_DD − |V_TH2|) + ln(3 − 4|V_TH2|/V_DD)], with R_on2 = 1/[βp(V_DD − |V_TH2|)]\n\n## 6. Power\n\n- **Static:** approximately zero, since one device is always off.\n- **Dynamic:** P = f·C_L·V_DD². Each cycle draws C_L·V_DD² from the supply; half is dissipated in M2 while charging and half in M1 while discharging.\n- **Short-circuit:** a brief \"crowbar\" current flows during transitions when both devices are on. It peaks near Vin = V_M at about ½βn(V_M − V_TH1)².\n\n## 7. Use as an analog amplifier\n\nBiased at V_M, the circuit gives high gain per unit current because both devices amplify. It has two drawbacks:\n\n- The bias point depends strongly on V_DD, thresholds, and process, so it usually needs self-biasing, for example a feedback resistor from output to input.\n- Supply noise reaches the output with gain (gm2 + 1/ro2)(ro1 ‖ ro2), so supply rejection is poor.",
        "format": "markdown",
        "sha256": "b2b4b90d72210ebf942fd860414499e547b40d34cb7fbf1baffe1f75eb0f3283"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up, with the correct logic-level operation. The additional analysis is optional under the golden solution and does not contradict the inverter’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 8703,
        "total_tokens": 9029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6919,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 8703,
        "total_tokens": 9029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6919,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**What the circuit is**\n\nBoth devices are NMOS. M1 (drain at V_DD, source at the output) is a source follower. M2 sits where the follower's bias current source would normally be, but its gate is also driven by V_in, so it acts as a common-source device. The input therefore reaches the output through two paths that partly cancel: a non-inverting path through M1 and an inverting path through M2.\n\n**Small-signal analysis**\n\nKCL at the output node:\n\ng_m1(v_in − v_out) = g_m2·v_in + v_out/r_o1 + v_out/r_o2\n\n- **Voltage gain:** A_v = (g_m1 − g_m2) / (g_m1 + 1/r_o1 + 1/r_o2) = (g_m1 − g_m2)(r_o1‖r_o2) / [1 + g_m1(r_o1‖r_o2)]\n- **With λ = 0:** A_v = 1 − g_m2/g_m1\n- **Output resistance:** R_out = (1/g_m1) ‖ r_o1 ‖ r_o2 ≈ 1/g_m1\n- **Input resistance:** infinite, since the input sees only gates\n\nThe gain is lower than that of a plain follower because of M2's inverting path, and it would be zero if g_m1 = g_m2. If M1's body is grounded, replace g_m1 with g_m1 + g_mb1 in the denominator and in R_out.\n\n**Bias point: M2 cannot be in saturation**\n\nThe formula above is the usual textbook result if both devices are assumed saturated. With equal thresholds, that assumption cannot hold:\n\n- M1 on requires V_in − V_out > V_TH, so V_out < V_in − V_TH.\n- M2 saturated requires V_out ≥ V_in − V_TH.\n\nThese contradict each other, and body effect on M1 only makes it worse. So M1 is saturated (true for any V_in ≤ V_DD + V_TH) and M2 is in the triode region.\n\nEquating the two drain currents, with k = μnCox(W/L):\n\n½k1(V_in − V_TH − V_out)² = k2[(V_in − V_TH)V_out − ½V_out²]\n\nwhich gives\n\n**V_out = (V_in − V_TH)·[1 − √(k2/(k1+k2))]**\n\n**Resulting behaviour** (square-law model, no body effect or channel-length modulation)\n\n- **V_in < V_TH:** both devices are off and V_out sits near 0.\n- **V_in > V_TH:** V_out rises linearly with V_in, with slope A_v = 1 − √(k2/(k1+k2)). This is always between 0 and 1, so the stage is a non-inverting attenuator. Identical devices give A_v ≈ 0.29; (W/L)1 = 3(W/L)2 gives 0.5.\n- **Consistency check:** putting the triode values g_m2 = k2·V_out and 1/r_o2 = k2(V_in − V_TH − V_out) into the small-signal formula gives the same slope.\n- **Drain current:** I_D = ½·[k1k2/(k1+k2)]·(V_in − V_TH)². The pair behaves like one longer transistor, with V_out tapping a point along its channel.",
        "format": "markdown",
        "sha256": "a3b95583011cbcbc406efb5c1979b85262ffc2bff4da85391b95390c035bb0be"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper source follower and lower input-controlled pull-down, and concludes the circuit is a non-inverting attenuator rather than a normal CMOS inverter. The nonessential small-signal simplification does not change that central analysis.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 13946,
        "total_tokens": 14272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12863,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 13946,
        "total_tokens": 14272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12863,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Summary:** this is an NMOS source follower (M1) on top of an NMOS common-source device (M2) with both gates tied to Vin. It looks like an inverter but behaves as a non-inverting attenuator with gain between 0 and 1. Since the question is open-ended, I cover the DC transfer characteristic and the small-signal gain.\n\nAssumptions: square-law devices, λ = 0, no body effect, equal thresholds VTH, 0 ≤ Vin ≤ VDD, and kᵢ = μnCox(W/L)ᵢ.\n\n## Large-signal behaviour\n\n**Vin < VTH:** VGS2 = Vin and VGS1 = Vin − Vout are both below VTH, so both transistors are off. No current flows and the high-impedance output sits near 0.\n\n**Vin > VTH:** M2 turns on and pulls the output down until M1 conducts, which requires Vout < Vin − VTH. Two facts follow:\n\n- **M1 is saturated:** VDS1 = VDD − Vout is greater than VGS1 − VTH = Vin − VTH − Vout.\n- **M2 is in triode:** VDS2 = Vout is less than VGS2 − VTH = Vin − VTH.\n\nSo the two devices can never both be saturated. Equating the currents:\n\n½·k1·(Vin − VTH − Vout)² = ½·k2·[2(Vin − VTH)·Vout − Vout²]\n\nSolving the quadratic (taking the root with Vout < Vin − VTH):\n\n**Vout = (Vin − VTH)·[1 − √(k2/(k1 + k2))]**\n\n- The characteristic is a straight line starting at Vin = VTH.\n- For equal sizes the slope is 1 − 1/√2 ≈ 0.29. For (W/L)1 = 3(W/L)2 it is 0.5.\n- The output never gets near VDD: its maximum is the slope times (VDD − VTH).\n\nThe current is\n\nID = ½·[k1k2/(k1 + k2)]·(Vin − VTH)²\n\nThis is the current of a single saturated transistor of length L1 + L2 (for equal widths). The circuit is effectively one long transistor with Vout tapped from a point inside its channel.\n\n## Small-signal behaviour\n\nKCL at the output, in general form:\n\ngm1(vin − vout) = gm2·vin + (gmb1 + gds1 + gds2)·vout\n\n- **Av = (gm1 − gm2) / (gm1 + gmb1 + gds1 + gds2)**\n- Rout = 1 / (gm1 + gmb1 + gds1 + gds2)\n- Rin = ∞ at low frequency\n\nAt the actual bias point, M2 is in triode, so:\n\n- gm1 = k1(Vin − VTH − Vout)\n- gm2 = k2·Vout\n- gds2 = k2(Vin − VTH − Vout)\n\nSubstituting gives Av = 1 − √(k2/(k1 + k2)), which matches the slope of the DC characteristic.\n\nIf you instead assume both devices are saturated, you get Av ≈ 1 − gm2/gm1. That is only achievable if VTH2 is sufficiently larger than VTH1 (for example, if M1 is a native or depletion device).\n\n## Other points\n\n- **Not an inverter:** the follower path (M1) always outweighs the inverting path (M2), so the gain is positive and less than 1.\n- **Static power:** current flows from VDD whenever Vin > VTH.\n- **Body effect:** M1's threshold rises with Vout, which keeps M2 even more firmly in triode, lowers the gain slightly (the gmb1 term) and makes the characteristic slightly nonlinear.",
        "format": "markdown",
        "sha256": "1ff7ad63d86c6502c40204c3e8a7cbc4a03dd9ca79245ed8035644601a0d4b67"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, recognizes the upper source-follower and lower pull-down actions, and concludes the circuit is not a normal CMOS inverter.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 14878,
        "total_tokens": 15204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13635,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 14878,
        "total_tokens": 15204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13635,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Summary.** This is an NMOS source follower (M1) whose pull-down device (M2) is also driven by V_in. It is a non-inverting stage with gain below 1, given by A_v = (g_m1 − g_m2)/(g_m1 + 1/r_O1 + 1/r_O2).\n\n## Topology\n\n- **M1**: drain at V_DD, gate at V_in, source at V_out, so it is a source follower (non-inverting path).\n- **M2**: source grounded, gate at V_in, drain at V_out, so it is a common-source device (inverting path).\n\nBoth are NMOS, so this is not a CMOS inverter. The two paths from V_in to V_out oppose each other.\n\n## Small-signal analysis\n\nKCL at the output node (V_DD is AC ground):\n\ng_m1(v_in − v_out) − v_out/r_O1 = g_m2·v_in + v_out/r_O2\n\nThis gives\n\n**A_v = (g_m1 − g_m2) / (g_m1 + 1/r_O1 + 1/r_O2) = (g_m1 − g_m2)(r_O1‖r_O2) / [1 + g_m1(r_O1‖r_O2)]**\n\n- If λ = 0 for M1 and M2 were saturated, this reduces to A_v = 1 − g_m2/g_m1.\n- Output resistance: R_out = (1/g_m1) ‖ r_O1 ‖ r_O2.\n- Input resistance: infinite at low frequency (gate input).\n\n## Operating regions\n\nAssume square-law devices with equal thresholds V_TH and no body effect.\n\n- **M1** is saturated, since V_GD1 = V_in − V_DD < V_TH for any V_in up to V_DD.\n- **M2** is in the triode region whenever M1 conducts. M1 being on requires V_out < V_in − V_TH, which means V_DS2 < V_GS2 − V_TH.\n\nSo in the gain formula, M2's parameters are the triode values: g_m2 = β₂V_out and 1/r_O2 = β₂(V_in − V_TH − V_out), where β = μₙC_ox(W/L).\n\n## Large-signal transfer characteristic\n\n- **V_in < V_TH**: both devices are off, no current flows, and V_out ≈ 0.\n- **V_in > V_TH**: equate the saturation current of M1 to the triode current of M2 (λ = 0):\n\n  (β₁/2)(V_in − V_TH − V_out)² = β₂[(V_in − V_TH)V_out − V_out²/2]\n\n  Taking the root with V_out < V_in − V_TH:\n\n  **V_out = (V_in − V_TH)·[1 − √(β₂/(β₁+β₂))]**\n\nThe output is therefore a linear, attenuated, level-shifted copy of the input, with slope\n\n**A_v = 1 − √[(W/L)₂ / ((W/L)₁ + (W/L)₂)]**, so 0 < A_v < 1.\n\nSubstituting the triode values of g_m2 and r_O2 into the small-signal formula gives the same slope. The gain is always positive, so g_m1 > g_m2 at any valid bias point.\n\nExamples:\n- Identical devices: A_v = 1 − 1/√2 ≈ 0.29.\n- (W/L)₁ = 3(W/L)₂: A_v = 0.5, so V_out = (V_in − V_TH)/2.\n\nThe static current is\n\nI_D = ½·μₙC_ox·(W/L)_eq·(V_in − V_TH)², with (W/L)_eq = (W/L)₁(W/L)₂ / [(W/L)₁ + (W/L)₂].\n\nThe pair behaves like one long NMOS transistor between V_DD and ground, with V_out as a tap partway along its channel.\n\n## Conclusions\n\n- The stage never inverts and cannot pull V_out anywhere near V_DD.\n- It draws static current whenever V_in > V_TH.\n- Body effect on M1 (if its bulk is grounded) lowers the gain further: A_v = (g_m1 − g_m2)/(g_m1 + g_mb1 + 1/r_O1 + 1/r_O2).",
        "format": "markdown",
        "sha256": "4410244dd7e11b71dc8ea6413cf966b476f795a05713a53286a478b09befae27"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, recognizes M1 as a source-follower pull-up and M2 as a pull-down, and concludes the circuit is not a normal CMOS inverter, satisfying the full-credit rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 11648,
        "total_tokens": 11974,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 11648,
        "total_tokens": 11974,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\n- **M1** is an NMOS with its source grounded, its gate driven by V_in and its drain at V_out, so it is a **common-source amplifier**.\n- **M2** is a PMOS with its source at V_DD and its gate tied to its drain, so it is a **diode-connected load**.\n\nSince V_SD2 = V_SG2 > V_SG2 − |V_THp|, M2 is always in saturation whenever it conducts.\n\n## Small-signal analysis\n\nA diode-connected transistor looks like a resistor of value (1/g_m2) ∥ r_o2 to AC ground. KCL at the output node gives\n\ng_m1·v_in + v_out/r_o1 + v_out/r_o2 + g_m2·v_out = 0\n\n**Voltage gain**\n\nA_v = v_out/v_in = −g_m1 · (1/g_m2 ∥ r_o2 ∥ r_o1)\n\nIf channel-length modulation is neglected (λ = 0), or since 1/g_m2 ≪ r_o1, r_o2:\n\nA_v ≈ −g_m1/g_m2\n\nBoth devices carry the same drain current, so with g_m = √(2μC_ox(W/L)I_D):\n\nA_v ≈ −√[ μ_n (W/L)₁ / ( μ_p (W/L)₂ ) ]\n\n**Impedances (low frequency)**\n\n- R_in = ∞, because the input is a MOS gate.\n- R_out = (1/g_m2) ∥ r_o2 ∥ r_o1 ≈ 1/g_m2\n\n## Large-signal (DC) behavior\n\nWith both devices in saturation and λ = 0, equating the drain currents:\n\n½ μ_n C_ox (W/L)₁ (V_in − V_THn)² = ½ μ_p C_ox (W/L)₂ (V_DD − V_out − |V_THp|)²\n\nV_out = V_DD − |V_THp| − √[ μ_n (W/L)₁ / ( μ_p (W/L)₂ ) ] · (V_in − V_THn)\n\n- The transfer characteristic is a straight line whose slope equals the small-signal gain found above.\n- For V_in < V_THn, M1 is off and V_out sits at about V_DD − |V_THp|.\n- M1 stays in saturation as long as V_out ≥ V_in − V_THn. Beyond that it enters the triode region and the gain drops.\n\n## Key observations\n\n1. **Well-defined gain.** The gain depends only on a ratio of device dimensions and mobilities. To first order it does not depend on bias current.\n2. **No body effect in the load.** The source and body of M2 are both at V_DD. An NMOS diode-connected load would add g_mb to the load conductance.\n3. **Low gain.** Because μ_n ≈ 2–3 μ_p, a gain of 10 requires (W/L)₁ to be roughly 30–50 times (W/L)₂.\n4. **Headroom trade-off.** The same current equation gives |V_GS2| − |V_THp| = |A_v|·(V_GS1 − V_THn). A high gain therefore forces a large overdrive on M2, which lowers the output DC level and reduces the swing.\n5. **Wide bandwidth.** The low output resistance (about 1/g_m2) puts the output pole at a high frequency, near g_m2/C_out.\n\n**Summary:** This is a common-source stage with a diode-connected PMOS load. It is an inverting amplifier with A_v = −g_m1(1/g_m2 ∥ r_o1 ∥ r_o2) ≈ −g_m1/g_m2, infinite input resistance and an output resistance of about 1/g_m2.",
        "format": "markdown",
        "sha256": "7b4670596891d11e9bea5a3a0cf55473350bfcc128521785027e7edee0ce66e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both output resistances included, plus the valid −gm1/gm2 approximation. The additional analysis is consistent with the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 794,
        "output_tokens": 2758,
        "total_tokens": 3552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 794,
        "output_tokens": 2758,
        "total_tokens": 3552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nThis is a **common-source amplifier with a diode-connected PMOS load**.\n\n- **M1** (NMOS): source grounded, gate driven by V_in, drain at V_out. It is the amplifying device.\n- **M2** (PMOS): source at V_DD, gate tied to drain. It is diode-connected and acts as the load.\n\n## Large-signal (DC) behavior\n\nBecause V_SD2 = V_SG2, M2 is always in saturation whenever it conducts. Setting I_D1 = I_D2 with M1 in saturation and λ = 0:\n\n½ μₙC_ox (W/L)₁ (V_in − V_THN)² = ½ μₚC_ox (W/L)₂ (V_DD − V_out − |V_THP|)²\n\nSolving for the output:\n\n**V_out = V_DD − |V_THP| − √[μₙ(W/L)₁ / μₚ(W/L)₂] · (V_in − V_THN)**\n\n- The transfer characteristic is a straight line in V_in, so the stage is quite linear.\n- For V_in < V_THN, M1 is off and V_out ≈ V_DD − |V_THP|. This is the upper limit of the output.\n- M1 stays in saturation while V_out ≥ V_in − V_THN. Below that it enters triode and the gain drops.\n\n## Small-signal analysis\n\nThe diode-connected M2 looks like a resistance (1/g_m2) ∥ r_o2 to AC ground. M1 is a transconductor g_m1 with r_o1 in parallel.\n\n- **Voltage gain:** A_v = −g_m1 · [(1/g_m2) ∥ r_o2 ∥ r_o1] ≈ **−g_m1/g_m2**\n- **Input resistance:** R_in = ∞ at low frequency (gate input)\n- **Output resistance:** R_out = (1/g_m2) ∥ r_o1 ∥ r_o2 ≈ 1/g_m2\n\nSince both transistors carry the same current, g_m = √(2μC_ox(W/L)I_D) gives:\n\n**A_v ≈ −√[μₙ(W/L)₁ / μₚ(W/L)₂]**\n\nThis matches the slope of the large-signal equation. Equivalently, using g_m = 2I_D/V_ov, A_v = −V_ov2/V_ov1.\n\n## Key observations\n\n1. **Gain is set by a ratio.** It depends on device dimensions and the mobility ratio, not on bias current or a resistor value, so it is well controlled.\n2. **No body effect in M2.** Its source and n-well are both at V_DD. An NMOS diode load would instead give −g_m1/(g_m2 + g_mb2).\n3. **Gain is low.** High gain needs (W/L)₁ ≫ (W/L)₂. For example, a gain of 10 requires μₙ(W/L)₁/μₚ(W/L)₂ = 100.\n4. **Gain trades against headroom.** Since |A_v| = V_ov2/V_ov1, a high gain means a large overdrive on M2, which pushes the DC output level down.\n5. **Output swing.** V_out ranges from about V_in − V_THN (edge of triode for M1) up to V_DD − |V_THP|.\n6. **Low output impedance (≈ 1/g_m2).** This gives wide bandwidth but modest gain.",
        "format": "markdown",
        "sha256": "8ed134412c921b3edd2cd96470acd29e9b9e9605672d971ec5040c43d990c0a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation treated consistently. The additional large-signal and operating-region discussion does not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 794,
        "output_tokens": 2565,
        "total_tokens": 3359,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1425,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 794,
        "output_tokens": 2565,
        "total_tokens": 3359,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1425,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Topology\n\nThis is a **common-source amplifier (M₁, NMOS) with a diode-connected PMOS load (M₂)**.\n\n- M₁: source grounded, input at the gate, output at the drain.\n- M₂: source at V_DD, gate tied to drain (the output node). Since V_SD = V_SG > V_SG − |V_TH2|, M₂ is in saturation whenever it conducts.\n- M₂'s source sits at V_DD (same as its n-well), so it has **no body effect**.\n\n## Large-signal (DC) behavior\n\nBoth devices carry the same current. With M₁ in saturation and λ = 0:\n\n$$\\tfrac12\\mu_nC_{ox}\\left(\\tfrac{W}{L}\\right)_1 (V_{in}-V_{TH1})^2=\\tfrac12\\mu_pC_{ox}\\left(\\tfrac{W}{L}\\right)_2 (V_{DD}-V_{out}-|V_{TH2}|)^2$$\n\n$$\\Rightarrow\\; V_{out}=V_{DD}-|V_{TH2}|-\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}\\,(V_{in}-V_{TH1})$$\n\n- For V_in < V_TH1, M₁ is off and V_out ≈ V_DD − |V_TH2|.\n- For V_in > V_TH1, V_out falls linearly with V_in. The square-law nonlinearities of the two devices cancel.\n- When V_out drops below V_in − V_TH1, M₁ enters triode and the gain collapses.\n\n## Small-signal analysis\n\nA diode-connected device looks like a resistance 1/g_m2 ∥ r_o2 from its drain to AC ground. The load at the output node is therefore 1/g_m2 ∥ r_o2 ∥ r_o1, and\n\n$$A_v=\\frac{v_{out}}{v_{in}}=-g_{m1}\\left(\\frac{1}{g_{m2}}\\,\\Big\\|\\,r_{o1}\\,\\Big\\|\\,r_{o2}\\right)$$\n\nSince 1/g_m2 ≪ r_o1, r_o2 (or with λ = 0):\n\n$$A_v\\approx-\\frac{g_{m1}}{g_{m2}}=-\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}=-\\frac{|V_{GS2}|-|V_{TH2}|}{V_{GS1}-V_{TH1}}$$\n\nThis matches the slope of the large-signal characteristic above.\n\n- **Input resistance:** R_in → ∞ at low frequency (gate input).\n- **Output resistance:** R_out = 1/g_m2 ∥ r_o1 ∥ r_o2 ≈ 1/g_m2, which is relatively low.\n\n## Key observations\n\n1. **Well-defined, linear gain.** The gain depends only on a ratio of device dimensions and mobilities, not on bias current, so it is fairly insensitive to process and temperature.\n2. **Gain is modest.** Because of the square root, a gain of 10 needs μₙ(W/L)₁ / μₚ(W/L)₂ = 100. With μₙ ≈ 2μₚ, that means (W/L)₁ ≈ 50 (W/L)₂.\n3. **Gain trades against headroom.** Since |A_v| = |V_OV2|/V_OV1, high gain requires a large overdrive on M₂. This lowers the DC output level, V_out = V_DD − |V_GS2|, and reduces the available swing.\n4. **Output swing.** The upper limit is about V_DD − |V_TH2|. The lower limit is V_in − V_TH1, the edge of triode for M₁.",
        "format": "markdown",
        "sha256": "8ff5324c5f767673362286dc84ce88e74050990470a7b638778ccfb0f068db83"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both devices’ output resistances included, matching the full-credit rule. The additional large-signal remarks do not change the essential result.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 794,
        "output_tokens": 3726,
        "total_tokens": 4520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 794,
        "output_tokens": 3726,
        "total_tokens": 4520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** this is a PMOS common-source stage with a diode-connected PMOS load, and its voltage gain is\n\n$$A_v=-g_{m2}\\left(\\frac{1}{g_{m1}}\\,\\|\\,r_{o1}\\,\\|\\,r_{o2}\\right)\\approx-\\frac{g_{m2}}{g_{m1}}=-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\quad(\\lambda=0)$$\n\n## Identifying the circuit\n\n- **M2** is a PMOS with its source at V_DD, its gate at V_in and its drain at V_out. It is the common-source amplifying device.\n- **M1** is a PMOS with its source at V_out and both its gate and drain grounded. Since gate and drain are at the same node, it is diode-connected and acts as the load.\n\n## Small-signal analysis\n\nV_DD is AC ground, so v_sg2 = −v_in and v_sg1 = v_out. KCL at the output node gives\n\n$$g_{m2}v_{in}+\\frac{v_{out}}{r_{o2}}+g_{m1}v_{out}+\\frac{v_{out}}{r_{o1}}=0$$\n\nM1 therefore looks like a resistance (1/g_m1) ‖ r_o1 from the output to ground, and\n\n$$A_v=\\frac{v_{out}}{v_{in}}=-\\frac{g_{m2}}{g_{m1}+\\dfrac{1}{r_{o1}}+\\dfrac{1}{r_{o2}}}$$\n\nIf λ = 0, the gain reduces to −g_m2/g_m1. Both devices are PMOS and carry the same current, so this equals −√[(W/L)₂/(W/L)₁].\n\n**Impedances:**\n- R_in = ∞ at low frequency, since the input is a MOS gate.\n- R_out = (1/g_m1) ‖ r_o1 ‖ r_o2 ≈ 1/g_m1.\n\n## Bias and large-signal behavior (λ = 0)\n\n- M1 has V_SG1 = V_SD1 = V_out, so it is always in saturation whenever it conducts (V_out > |V_TH1|).\n- M2 is in saturation when V_out ≤ V_in + |V_TH2|.\n\nEquating the two drain currents:\n\n$$\\tfrac12\\mu_pC_{ox}\\left(\\tfrac{W}{L}\\right)_2\\left(V_{DD}-V_{in}-|V_{TH2}|\\right)^2=\\tfrac12\\mu_pC_{ox}\\left(\\tfrac{W}{L}\\right)_1\\left(V_{out}-|V_{TH1}|\\right)^2$$\n\n$$V_{out}=|V_{TH1}|+\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\,\\left(V_{DD}-V_{in}-|V_{TH2}|\\right)$$\n\nThe transfer characteristic is a straight line whose slope equals the small-signal gain. When M2 turns off (V_in > V_DD − |V_TH2|), V_out settles near |V_TH1|. As V_in falls, V_out rises linearly until M2 enters the triode region at V_out = V_in + |V_TH2|.\n\n## Observations\n\n- The gain is set by a ratio of device dimensions, so it is well controlled and fairly linear, but it is small. The diode-connected load has a low impedance, about 1/g_m1.\n- The gain can also be written as |A_v| = V_OV1/V_OV2, the ratio of overdrive voltages, so high gain uses up voltage headroom quickly.\n- This analysis neglects body effect. If M1's n-well were tied to V_DD rather than to its source, g_m1 would be replaced by g_m1 + g_mb1, lowering the gain slightly.",
        "format": "markdown",
        "sha256": "b8410794ce983c4157400833f396bd9fa353d4813c98fabc581f603e8a139126"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain grounded. It gives the required gm/gm gain, Av ≈ −gm2/gm1; the additional analysis is consistent with this interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 6205,
        "total_tokens": 8055,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4914,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 6205,
        "total_tokens": 8055,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4914,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** the circuit is a PMOS common-source amplifier with a diode-connected PMOS load, and its voltage gain is\n\n$$A_v=\\frac{v_{out}}{v_{in}}=-g_{m2}\\left(\\frac{1}{g_{m1}}\\,\\Big\\|\\,r_{o1}\\,\\Big\\|\\,r_{o2}\\right)$$\n\nI assumed the goal is the small-signal voltage gain and the input and output resistances, since the figure comes without a specific question.\n\n**1. Identifying the devices**\n\n- **M₂** is a PMOS with its source at V_DD, its gate at V_in and its drain at V_out. It is the common-source amplifying device.\n- **M₁** is a PMOS with its source at V_out and both its gate and drain grounded. Because gate and drain are tied together, it is diode-connected and acts as the load.\n\n**2. Small-signal analysis**\n\nA diode-connected transistor looks like a resistance of (1/g_m1) ‖ r_o1 from its source to ground.\n\nKCL at the output node, with the source of M₂ at AC ground:\n\n$$g_{m2}v_{in}+\\frac{v_{out}}{r_{o2}}+g_{m1}v_{out}+\\frac{v_{out}}{r_{o1}}=0$$\n\nSolving for v_out/v_in gives the gain stated above.\n\n**3. Simplification for λ = 0**\n\nWith r_o1, r_o2 → ∞, and since both devices are PMOS carrying the same drain current:\n\n$$A_v=-\\frac{g_{m2}}{g_{m1}}=-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\nThe gain is set only by the ratio of the device dimensions, so it is well defined but modest.\n\n**4. Input and output resistance**\n\n- R_in = ∞ at low frequencies, because the input is a gate.\n- R_out = (1/g_m1) ‖ r_o1 ‖ r_o2 ≈ 1/g_m1.\n\n**5. Bias and large-signal behaviour**\n\n- M₁ has V_SD1 = V_SG1 = V_out, so it is always in saturation when it conducts.\n- Equating the two drain currents (λ = 0):\n\n$$V_{out}=|V_{TH1}|+\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\,\\bigl(V_{DD}-V_{in}-|V_{TH2}|\\bigr)$$\n\n This is a straight line whose slope equals the small-signal gain.\n- M₂ stays in saturation as long as V_out ≤ V_in + |V_TH2|.\n\nThis neglects body effect in M₁. If its n-well is tied to V_DD rather than to its source, replace 1/g_m1 with 1/(g_m1 + g_mb1).",
        "format": "markdown",
        "sha256": "835925796985a20e56d1f9855eba329894a62a003939aaf7c1a5a1f564865c3b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, and M1 as a diode-connected PMOS load. It gives the required gm/gm gain, with reasonable small-signal refinements; minor secondary imprecision does not affect the central analysis.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 3788,
        "total_tokens": 5638,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2838,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 3788,
        "total_tokens": 5638,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2838,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No specific question came with the figure, so here is the standard analysis: topology, bias, small-signal gain, and input/output resistance.\n\n## 1. What the circuit is\n\nBoth transistors are PMOS devices (the source arrows point into the device).\n\n- **M2**: source at V_DD, gate at V_in, drain at V_out. This is a common-source amplifier.\n- **M1**: source at V_out, gate and drain both grounded. Because gate and drain are tied together, this is a diode-connected load.\n\nSo the circuit is a PMOS common-source stage with a diode-connected PMOS load.\n\n## 2. Large-signal (bias) behavior\n\nM1 has V_SD1 = V_SG1 = V_out, so it is always in saturation whenever it conducts (V_out > |V_TH1|).\n\nM2 is on when V_in < V_DD − |V_TH2|, and it is in saturation when V_out ≤ V_in + |V_TH2|.\n\nBoth devices carry the same current. Neglecting channel-length modulation (λ = 0):\n\n½ μpCox (W/L)₂ (V_DD − V_in − |V_TH2|)² = ½ μpCox (W/L)₁ (V_out − |V_TH1|)²\n\nSolving for the output:\n\n**V_out = |V_TH1| + √[(W/L)₂/(W/L)₁] · (V_DD − V_in − |V_TH2|)**\n\nThe output is a linear function of V_in with a negative slope. If V_in rises above V_DD − |V_TH2|, M2 turns off and V_out falls to about |V_TH1|.\n\n## 3. Small-signal analysis\n\nV_DD is an ac ground. M2 draws a current g_m2·v_in out of the output node. M1 has v_gs1 = −v_out, so it behaves as a resistance 1/g_m1 in parallel with r_O1 from the output to ground. M2's r_O2 also connects the output to ac ground.\n\nKCL at the output node:\n\ng_m2 v_in + v_out (g_m1 + 1/r_O1 + 1/r_O2) = 0\n\n**Voltage gain (λ ≠ 0):**\n\n**A_v = −g_m2 · (1/g_m1 ‖ r_O1 ‖ r_O2)**\n\n**Voltage gain (λ = 0):**\n\n**A_v = −g_m2/g_m1 = −√[(W/L)₂/(W/L)₁]**\n\nThis matches the slope of the large-signal expression above.\n\n**Input resistance:** R_in = ∞ (looking into a MOS gate at low frequency).\n\n**Output resistance:** R_out = 1/g_m1 ‖ r_O1 ‖ r_O2 ≈ 1/g_m1.\n\n## 4. Observations\n\n- The stage is inverting.\n- The gain is set by a ratio of device dimensions, so to first order it does not depend on bias current, mobility, or Cox.\n- The gain is modest in practice, because a gain of A requires (W/L)₂ ≈ A²·(W/L)₁.\n- If M1's n-well is tied to V_DD instead of its source, body effect adds g_mb1 to the load conductance, and the gain becomes A_v ≈ −g_m2/(g_m1 + g_mb1).",
        "format": "markdown",
        "sha256": "665488ecbf68ac2aea05da6026e9f19d2282b9c1f991a3a2da5618be64177dda"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, and M1 as a diode-connected PMOS load; it derives the required inverting gm/gm gain, Av ≈ −gm2/gm1. The extra analysis does not undermine the essential interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 7077,
        "total_tokens": 8927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5995,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 7077,
        "total_tokens": 8927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5995,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** R_out = (1 + g_m1 r_o1) r_o2 + r_o1 ≈ g_m1 r_o1 r_o2\n\nThis is a PMOS cascode current source, and the result follows from a small-signal analysis (assuming both transistors are in saturation, λ > 0).\n\n**Step 1 – Replace M₂.** In small-signal, V_DD and V_b2 are AC ground, so v_gs2 = 0. M₂'s dependent source is off, and M₂ acts as a resistor r_o2 from node X to ground.\n\n**Step 2 – Analyze M₁ degenerated by r_o2.** Apply a test voltage v_t at the drain of M₁, drawing current i_t.\n\n- All of i_t flows through r_o2, so v_X = i_t r_o2.\n- The gate of M₁ is at AC ground, so v_gs1 = −v_X = −i_t r_o2.\n- The current through r_o1 is i_t − g_m1 v_gs1 = i_t (1 + g_m1 r_o2).\n\nAdding the voltage drops across r_o1 and r_o2:\n\nv_t = i_t (1 + g_m1 r_o2) r_o1 + i_t r_o2\n\n**Step 3 – Output resistance.**\n\nR_out = v_t / i_t = r_o1 + r_o2 + g_m1 r_o1 r_o2 = (1 + g_m1 r_o1) r_o2 + r_o1\n\nSince g_m1 r_o1 ≫ 1, this simplifies to R_out ≈ g_m1 r_o1 r_o2.\n\nThe cascode device M₁ boosts the output resistance of M₂ by roughly its intrinsic gain g_m1 r_o1.\n\nIf body effect in M₁ is included, replace g_m1 with (g_m1 + g_mb1).",
        "format": "markdown",
        "sha256": "7dae26a1edfd0634e310e14a1b3f4a805443e0ff4739cffad503ac3306b3f172"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the cascode device and gives the correct output-resistance expression and approximation. Body effect is appropriately optional.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2827,
        "output_tokens": 1220,
        "total_tokens": 4047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 603,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2827,
        "output_tokens": 1220,
        "total_tokens": 4047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 603,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** R_out = (1 + g_m1 r_o2) r_o1 + r_o2 ≈ g_m1 r_o1 r_o2\n\nThis is a PMOS cascode, analysed with the small-signal model (λ ≠ 0, body effect neglected).\n\n**Step 1 – M₂.** Its source is at V_DD and its gate is at V_b2, both AC ground, so v_gs2 = 0. M₂ therefore reduces to a resistor r_o2 from node X to AC ground.\n\n**Step 2 – M₁.** Its gate is at AC ground and its source (node X) sees r_o2, so M₁ is a transistor degenerated by r_o2. Apply a test voltage v_t at the drain of M₁ and let i_t flow in:\n\n- All of i_t flows through r_o2, so v_X = i_t r_o2.\n- The gate is grounded, so v_gs1 = −v_X = −i_t r_o2.\n- KCL at the drain: i_t = g_m1 v_gs1 + (v_t − v_X)/r_o1 = −g_m1 r_o2 i_t + (v_t − i_t r_o2)/r_o1.\n\nSolving for v_t / i_t:\n\n**R_out = (1 + g_m1 r_o2) r_o1 + r_o2 = r_o1 + r_o2 + g_m1 r_o1 r_o2**\n\nSince g_m1 r_o1 ≫ 1, this is approximately **g_m1 r_o1 r_o2**: the cascode device M₁ boosts the output resistance of M₂ by its intrinsic gain g_m1 r_o1.\n\nIf body effect is included for M₁, replace g_m1 with (g_m1 + g_mb1).",
        "format": "markdown",
        "sha256": "67746018abe21623f3913346aac81c5a069bb2b9d7072e966d8d68eac805cd99"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS topology with M1 as the cascode device and gives the correct output-resistance expression and approximation. Body effect is appropriately optional.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2827,
        "output_tokens": 1138,
        "total_tokens": 3965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2827,
        "output_tokens": 1138,
        "total_tokens": 3965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** R_out = (1 + g_m1·r_O2)·r_O1 + r_O2 ≈ g_m1·r_O1·r_O2 (a PMOS cascode current source, with channel-length modulation included and body effect neglected).\n\n**Step 1 – Replace M₂.** Its gate (V_b2) and source (V_DD) are both at AC ground, so v_gs2 = 0 and its dependent source is off. M₂ therefore acts as a resistor r_O2 from node X to AC ground.\n\n**Step 2 – Analyze M₁ with r_O2 at its source.** M₁ has its gate at AC ground (V_b1) and is degenerated by r_O2. Apply a test voltage v_t at the drain of M₁, drawing current i_t:\n\n- Node X voltage: v_X = i_t·r_O2\n- Gate-source voltage of M₁: v_gs1 = 0 − v_X = −i_t·r_O2\n- Current through M₁: i_t = g_m1·v_gs1 + (v_t − v_X)/r_O1 = −g_m1·r_O2·i_t + (v_t − i_t·r_O2)/r_O1\n\n**Step 3 – Solve for v_t / i_t:**\n\nR_out = v_t / i_t = r_O1 + r_O2 + g_m1·r_O1·r_O2 = (1 + g_m1·r_O2)·r_O1 + r_O2\n\nSince g_m1·r_O1 ≫ 1, this is approximately g_m1·r_O1·r_O2: the cascode device M₁ boosts the output resistance of M₂ by its intrinsic gain g_m1·r_O1.",
        "format": "markdown",
        "sha256": "6686ac67c5506bd171edeff0f7663567ca2a1a0fcee20f3326fc28cf6d6a865f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the cascode device and gives the correct output-resistance expression without optional body effect, plus the correct dominant approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2827,
        "output_tokens": 1185,
        "total_tokens": 4012,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 621,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2827,
        "output_tokens": 1185,
        "total_tokens": 4012,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 621,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**M2 stays in saturation if its drain (node X) is no more than one threshold above its gate, which we ensure by choosing V_b1 low enough.**\n\n**Condition on M2**\n\nM2 is a PMOS device with its source at V_DD, gate at V_b2 and drain at X. Assuming it is on (V_DD − V_b2 > |V_TH2|), saturation requires\n\nV_SD2 ≥ V_SG2 − |V_TH2|\n\nV_DD − V_X ≥ V_DD − V_b2 − |V_TH2|\n\nwhich simplifies to\n\n**V_X ≤ V_b2 + |V_TH2|**\n\n**What sets V_X**\n\nNode X is the source of the cascode device M1, so its voltage is set by V_b1:\n\nV_X = V_b1 + V_SG1, where V_SG1 = |V_TH1| + √(2I_D / (μ_p C_ox (W/L)_1))\n\n**Resulting bias condition**\n\nSubstituting V_X into the saturation condition gives\n\n**V_b1 ≤ V_b2 + |V_TH2| − V_SG1**\n\nIf the two thresholds are equal, this reduces to V_b1 ≤ V_b2 − V_OD1, where V_OD1 = V_SG1 − |V_TH1| is the overdrive of M1. In other words, V_b1 must sit below V_b2 by at least the overdrive voltage of M1.\n\nEquivalently, V_b1 ≤ V_DD − V_SG1 − V_OD2, which leaves M2 a source-drain voltage of at least its own overdrive, V_OD2 = V_SG2 − |V_TH2|.",
        "format": "markdown",
        "sha256": "c8d9fb6dd580dc7cef26e5d5e86277ab4b9f6a344fbfcef6b5e9fe4da1f2234f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, relates VX to Vb1, and derives the equivalent Vb1 bias condition.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2791,
        "output_tokens": 1729,
        "total_tokens": 4520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2791,
        "output_tokens": 1729,
        "total_tokens": 4520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** choose the cascode bias V_b1 low enough that node X sits at or below V_b2 + |V_TH2|.\n\n**Derivation**\n\nM2 is a PMOS device with its source at V_DD, gate at V_b2, and drain at node X. It is in saturation when its drain is no more than one threshold above its gate:\n\n$$V_{SD2} \\ge V_{SG2} - |V_{TH2}| \\;\\;\\Longrightarrow\\;\\; V_X \\le V_{b2} + |V_{TH2}|$$\n\nNode X is set by the cascode device M1, since X is the source of M1:\n\n$$V_X = V_{b1} + V_{SG1}$$\n\nCombining the two:\n\n$$V_{b1} + V_{SG1} \\le V_{b2} + |V_{TH2}|$$\n\n$$\\boxed{V_{b1} \\le V_{b2} + |V_{TH2}| - V_{SG1}}$$\n\n**In terms of overdrive voltages**\n\nSince V_b2 + |V_TH2| = V_DD − |V_OV2|, where |V_OV2| = V_SG2 − |V_TH2|, the condition says M2 needs at least one overdrive voltage across it:\n\n$$V_{SD2} = V_{DD} - V_{b1} - V_{SG1} \\ge |V_{OV2}|$$\n\n$$V_{b1} \\le V_{DD} - |V_{OV2}| - V_{SG1}$$\n\nHere V_SG1 = |V_TH1| + |V_OV1| is fixed by the bias current and the W/L of M1.\n\n**Practical note:** setting V_b1 exactly at this upper limit puts M2 at the edge of saturation. This leaves the most room for the output, which can then rise to V_DD − |V_OV1| − |V_OV2| before M1 leaves saturation.",
        "format": "markdown",
        "sha256": "e861bcf5f707747d4d5f171eeb2d72852499fde75f59d084fe46618464968c48"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and relates node X to Vb1 to derive the required bias condition. The additional output-headroom note is consistent with the stated boundary condition.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2791,
        "output_tokens": 1472,
        "total_tokens": 4263,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 855,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2791,
        "output_tokens": 1472,
        "total_tokens": 4263,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 855,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** choose V_b1 low enough that node X sits no more than one threshold above M2's gate, so that M2's source–drain voltage is at least its overdrive.\n\n**Derivation**\n\nM2 is a PMOS device with source at V_DD, gate at V_b2 and drain at X. It is in saturation when\n\nV_SD2 ≥ V_SG2 − |V_TH2|\n\nSubstituting the node voltages:\n\nV_DD − V_X ≥ V_DD − V_b2 − |V_TH2|, which gives **V_X ≤ V_b2 + |V_TH2|**\n\nThe voltage at X is set by the cascode device M1, whose source is at X:\n\nV_X = V_b1 + |V_GS1|\n\nCombining the two:\n\n**V_b1 + |V_GS1| ≤ V_b2 + |V_TH2|**, or equivalently **V_b1 ≤ V_b2 + |V_TH2| − |V_GS1|**\n\nHere |V_GS1| = |V_TH1| + √(2I_D / (μ_p C_ox (W/L)_1)) is the gate–source voltage M1 needs to carry the bias current.\n\n**Interpretation**\n\n- If the two thresholds are equal, the condition reduces to V_b1 ≤ V_b2 − V_OD1, where V_OD1 = |V_GS1| − |V_TH1|. The cascode gate must be biased below M2's gate by at least M1's overdrive voltage.\n- M2 must also be on, which requires V_DD − V_b2 > |V_TH2|.\n- V_b1 should not be made lower than necessary. M1 must stay saturated too, which requires V_out ≤ V_b1 + |V_TH1|, so a lower V_b1 reduces the output swing. Setting V_b1 = V_b2 + |V_TH2| − |V_GS1| puts M2 at the edge of saturation and allows the output to rise as high as V_DD − (V_OD1 + V_OD2).",
        "format": "markdown",
        "sha256": "8155cb2e407939c8b42011409a7e86eb7c36f62e929e416ad500be28225507d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, relates X to Vb1, and derives the required Vb1 inequality. The essential answer matches the full-credit rule.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2791,
        "output_tokens": 2191,
        "total_tokens": 4982,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1527,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2791,
        "output_tokens": 2191,
        "total_tokens": 4982,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1527,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nThis is a **MOS cascode amplifier** with an ideal current-source load:\n\n- **M₁** is a common-source device that converts v_in into a drain current (g_m1·v_in).\n- **M₂** is a common-gate (cascode) device, with its gate held at the DC bias V_b1, that passes this current to the output and shields M₁ from the output node.\n- **I₁** is an ideal current source, which is an open circuit for small signals.\n\n## Bias conditions\n\nBoth transistors carry I_D = I₁, and V_X = V_b1 − V_GS2.\n\n- M₁ is in saturation if V_X ≥ V_GS1 − V_TH1, i.e. V_b1 ≥ V_GS2 + (V_GS1 − V_TH1).\n- M₂ is in saturation if V_out ≥ V_b1 − V_TH2.\n- With V_b1 at its minimum, the lowest allowed output is V_out,min = V_OV1 + V_OV2, two overdrive voltages. This headroom is the price of cascoding.\n\n## Small-signal analysis (λ ≠ 0, body effect neglected)\n\nThe gate of M₂ is at AC ground, so v_gs2 = −v_X.\n\n**Output node.** I₁ is an open circuit, so no small-signal current flows through M₂:\n\n−g_m2·v_X + (v_out − v_X)/r_O2 = 0  ⟹  v_out = (1 + g_m2·r_O2)·v_X\n\n**Node X.** No current arrives from M₂, so:\n\ng_m1·v_in + v_X/r_O1 = 0  ⟹  v_X = −g_m1·r_O1·v_in\n\n**Voltage gain:**\n\n**A_v = v_out/v_in = −g_m1·r_O1·(1 + g_m2·r_O2) ≈ −(g_m1·r_O1)(g_m2·r_O2)**\n\n**Output resistance.** With v_in = 0, M₁ reduces to r_O1, which acts as source degeneration for M₂:\n\n**R_out = (1 + g_m2·r_O2)·r_O1 + r_O2 ≈ g_m2·r_O2·r_O1**\n\n**Input resistance.** R_in → ∞ at low frequency, since the input is a MOS gate.\n\nAs a check, A_v = −G_m·R_out with G_m ≈ g_m1 gives −g_m1[(1 + g_m2·r_O2)·r_O1 + r_O2] ≈ −g_m1·g_m2·r_O1·r_O2, the same result to first order.\n\n## Key observations\n\n1. **Gain boost.** A common-source stage with an ideal current-source load gives only −g_m1·r_O1. The cascode multiplies this by about g_m2·r_O2, the intrinsic gain of M₂, so the total is roughly the square of a single transistor's intrinsic gain.\n2. **Output impedance boost.** M₂ raises the output resistance from r_O1 to about g_m2·r_O2·r_O1.\n3. **Dependence on bias current.** Using g_m = √(2μₙC_ox(W/L)·I₁) and r_O = 1/(λI₁):\n\n   |A_v| ≈ 2μₙC_ox·√((W/L)₁(W/L)₂) / (λ₁λ₂·I₁)\n\n   So the gain increases as I₁ is reduced.\n4. **Body effect.** If included for M₂, replace g_m2 with (g_m2 + g_mb2), which increases gain and R_out slightly.\n5. **Practical limit.** A real current source has finite resistance R_p, which gives A_v ≈ −g_m1·(R_out ∥ R_p). To preserve the gain, the load is usually a PMOS cascode as well.",
        "format": "markdown",
        "sha256": "801f76b08810f4874060e7f82f66cd3ccebc54269b15af26cd362bb7c22db1d9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source input device and common-gate NMOS cascode, and derives the ideal-current-source-load gain equivalent to the golden expression. The output-resistance and body-effect comments are also consistent.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 4855,
        "total_tokens": 6309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3586,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 4855,
        "total_tokens": 6309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3586,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**What it is:** This is an NMOS cascode amplifier with an ideal current-source load. M1 is the common-source input device, M2 is the common-gate (cascode) device, and I₁ sets the bias current. The figure comes with no specific question, so I assume the goal is the small-signal gain and output resistance, plus the bias conditions.\n\n**Result:**\n\n$$A_v=\\frac{v_{out}}{v_{in}}=-g_{m1}r_{O1}\\,(1+g_{m2}r_{O2})\\approx-(g_{m1}r_{O1})(g_{m2}r_{O2})$$\n\n$$R_{out}=(1+g_{m2}r_{O2})\\,r_{O1}+r_{O2}\\approx g_{m2}r_{O2}r_{O1}$$\n\n## Small-signal analysis\n\nAssume both transistors are in saturation with channel-length modulation (λ ≠ 0), and neglect body effect. The ideal current source is a small-signal open circuit, so no signal current can flow in the M1–M2 branch.\n\n1. **KCL at node X (current through M1 is zero):**\n\n$$g_{m1}v_{in}+\\frac{v_X}{r_{O1}}=0\\;\\Rightarrow\\;v_X=-g_{m1}r_{O1}\\,v_{in}$$\n\n2. **KCL at the output (current through M2 is zero), with $v_{gs2}=-v_X$:**\n\n$$-g_{m2}v_X+\\frac{v_{out}-v_X}{r_{O2}}=0\\;\\Rightarrow\\;v_{out}=(1+g_{m2}r_{O2})\\,v_X$$\n\n3. **Combining the two** gives the gain above.\n\n**Interpretation:** M1 develops its full intrinsic gain $g_{m1}r_{O1}$ at node X, because the resistance looking up into M2's source is infinite when the load is an ideal current source. M2 then acts as a common-gate stage and multiplies this by $(1+g_{m2}r_{O2})$. The overall gain is roughly the square of a single transistor's intrinsic gain.\n\n**Check with $A_v=-G_mR_{out}$:** With the output shorted, the current $g_{m1}v_{in}$ divides between $r_{O1}$ and the resistance seen at M2's source, $r_{O2}/(1+g_{m2}r_{O2})$. This gives\n\n$$G_m=g_{m1}\\frac{r_{O1}(1+g_{m2}r_{O2})}{r_{O1}(1+g_{m2}r_{O2})+r_{O2}}\\approx g_{m1}$$\n\nand $G_mR_{out}=g_{m1}r_{O1}(1+g_{m2}r_{O2})$, the same result.\n\n**Output resistance:** With $v_{in}=0$, M1 reduces to $r_{O1}$, which degenerates M2 and boosts its output resistance by about $g_{m2}r_{O2}$, giving the $R_{out}$ above.\n\n**Body effect:** If M2's body is grounded, replace $g_{m2}$ with $g_{m2}+g_{mb2}$.\n\n**Dependence on bias current:** Since $g_m=\\sqrt{2\\mu_nC_{ox}(W/L)I_1}$ and $r_O\\approx 1/(\\lambda I_1)$,\n\n$$|A_v|\\approx\\frac{2\\mu_nC_{ox}\\sqrt{(W/L)_1(W/L)_2}}{\\lambda_1\\lambda_2\\,I_1}$$\n\nso the gain falls as the bias current increases.\n\n## Bias conditions\n\n- **Currents:** $I_{D1}=I_{D2}=I_1$, so $V_{GS1}=V_{TH1}+\\sqrt{2I_1/[\\mu_nC_{ox}(W/L)_1]}$ and $V_X=V_{b1}-V_{GS2}$.\n- **M1 in saturation:** $V_X\\ge V_{GS1}-V_{TH1}$, which requires $V_{b1}\\ge V_{GS2}+(V_{GS1}-V_{TH1})$.\n- **M2 in saturation:** $V_{out}\\ge V_{b1}-V_{TH2}$. With the minimum $V_{b1}$, the lowest output voltage is $V_{out,min}=V_{OD1}+V_{OD2}$, where $V_{OD}=V_{GS}-V_{TH}$. This is one overdrive more than a simple common-source stage, which is the headroom cost of the cascode.\n- **Output DC level:** The output is a very high-impedance node fed by a current source, so its DC voltage is not well defined in open loop. In practice it is set by feedback.",
        "format": "markdown",
        "sha256": "13290c8e1a87559e8aaa6295a39083cc7e5fac9dde659e1e895adefe244eaf5b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. The extra analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 5182,
        "total_tokens": 6636,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3582,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 5182,
        "total_tokens": 6636,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3582,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit identification**\n\nThis is a cascode amplifier with an ideal current-source load: M₁ is the common-source input device, M₂ is the common-gate cascode device biased by V_b1, and I₁ is the load. The figure comes with no question, so I assume the goal is the bias conditions, small-signal gain and output resistance.\n\n**1. Bias (large-signal) conditions**\n\n- I_D1 = I_D2 = I₁, and V_X = V_b1 − V_GS2.\n- M₁ is in saturation if V_X ≥ V_in − V_TH1, which requires V_b1 ≥ V_GS2 + (V_GS1 − V_TH1).\n- M₂ is in saturation if V_out ≥ V_b1 − V_TH2.\n- With V_b1 at its minimum, the lowest allowed output is V_out,min = V_OD1 + V_OD2, i.e. two overdrive voltages.\n\n**2. Small-signal voltage gain**\n\nThe ideal current source is an open circuit for small signals, so no small-signal current flows through M₂ or M₁.\n\nKCL at node X, with zero net current through M₁:\n\ng_m1·v_in + v_X / r_o1 = 0, so v_X = −g_m1 r_o1 · v_in\n\nKCL at the output, with zero net current through M₂ (gate at AC ground, so v_gs2 = v_bs2 = −v_X):\n\n−(g_m2 + g_mb2)·v_X + (v_out − v_X)/r_o2 = 0, so v_out = v_X·[1 + (g_m2 + g_mb2) r_o2]\n\nCombining the two:\n\n**A_v = v_out/v_in = −g_m1 r_o1 [1 + (g_m2 + g_mb2) r_o2] ≈ −g_m1 r_o1 (g_m2 + g_mb2) r_o2**\n\nThe gain is roughly the product of the two intrinsic gains. If the body of M₂ is tied to its source, set g_mb2 = 0.\n\n**3. Output resistance and transconductance**\n\n- R_out = [1 + (g_m2 + g_mb2) r_o2] r_o1 + r_o2 ≈ (g_m2 + g_mb2) r_o2 r_o1\n- G_m = g_m1 r_o1 [1 + (g_m2 + g_mb2) r_o2] / [r_o1 r_o2 (g_m2 + g_mb2) + r_o1 + r_o2] ≈ g_m1\n- Check: A_v = −G_m R_out gives the same result as above.\n\n**4. Observations**\n\n- **Gain at node X:** v_X/v_in = −g_m1 r_o1. With an ideal current-source load, the resistance looking into the source of M₂ is infinite, so M₁ develops its full intrinsic gain at X.\n- **Dependence on bias current:** using g_m = √(2μₙC_ox(W/L)I_D) and r_o = 1/(λI_D), and neglecting body effect,\n\n  |A_v| ≈ 2μₙC_ox √((W/L)₁(W/L)₂) / (λ₁λ₂ I₁)\n\n  so the gain is inversely proportional to I₁.\n- **Trade-off:** compared with a simple common-source stage, the cascode raises the output resistance and gain by about (g_m2 + g_mb2) r_o2, at the cost of one extra overdrive voltage of output headroom.\n- **Practical note:** the DC level of V_out is set by a very high-impedance node, so in practice it must be defined by feedback.",
        "format": "markdown",
        "sha256": "e2b6c37c09382db5e822035ae61774a3fceb7cda055c03f4cd454652f72cafef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the equivalent ideal-load gain expression specified by the full-credit rule. Minor wording or secondary issues do not affect the essential answer.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 3563,
        "total_tokens": 5017,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2367,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 3563,
        "total_tokens": 5017,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2367,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, this is not a cascode.**\n\n**Why:** In a cascode, the input transistor is a common-source device. Its drain current, set by V_in, flows into the source of a common-gate transistor stacked on its drain.\n\nHere the arrows show a different arrangement:\n\n- **M₂** is an NMOS with its gate at V_b1, its source at the bottom and its drain at V_out. It is a common-gate device, as in a cascode.\n- **M₁** is a PMOS with its source at the top, tied to the source of M₂, and its drain grounded. With the input on its gate and the output taken at its source, it is a **source follower**, not a common-source stage.\n\nSo the circuit is a source follower (M₁) driving a common-gate stage (M₂).\n\n**Consequences** (with X the shared source node, and neglecting channel-length modulation and body effect):\n\n- **Gain:** The follower gives v_X = v_in · g_m1/(g_m1 + g_m2), and the common-gate stage gives v_out = g_m2 R_D v_X. Therefore\n\n  A_v = +g_m1 g_m2 R_D/(g_m1 + g_m2) = R_D / (1/g_m1 + 1/g_m2)\n\n  The gain is non-inverting, whereas a cascode gives about −g_m1 R_D.\n\n- **Output impedance:** M₂ sees only about 1/g_m1 at its source, not r_O1. Looking into its drain, the resistance is roughly r_O2(1 + g_m2/g_m1), or about 2r_O2 for equal transconductances. A true cascode would give about g_m2 r_O2 r_O1, so the impedance boost that defines a cascode is absent.",
        "format": "markdown",
        "sha256": "fe902f5e07c40b7a5b9348686f2ad5d2687a0b3c71a2bf1a82632fa7408ab56f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower, not a common-source input device, and concludes the structure lacks cascode resistance boosting. The extra gain and output-resistance discussion is consistent with the stated assumptions.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 3256,
        "total_tokens": 4782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2697,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 3256,
        "total_tokens": 4782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2697,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, this is not a cascode**, even though it looks like one at first glance (two stacked transistors with a bias voltage on the upper gate).\n\n**Why not**\n\n- The arrows show that M₂ is an NMOS device, while M₁ is a PMOS device whose source is at the top and whose drain is grounded.\n- So the two transistors are connected source-to-source.\n- In a true cascode, the input device is a common-source stage: it converts V_in to a current at its drain, and that drain feeds the source of the common-gate device.\n- Here the signal comes out of M₁'s source, so M₁ acts as a source follower (common-drain stage), not as a transconductor.\n\nThe circuit is therefore a source follower (M₁) driving a common-gate stage (M₂).\n\n**Consequences**\n\n- **Gain:** M₁ looks like a Thevenin source equal to v_in with series resistance 1/g_m1, driving the source of M₂. Neglecting channel-length modulation,\n\n  A_v = R_D / (1/g_m1 + 1/g_m2) = g_m1·g_m2·R_D / (g_m1 + g_m2)\n\n  The gain is non-inverting, and equals about g_m·R_D/2 if the transconductances are equal. A cascode would give −g_m1·R_D.\n\n- **Output impedance:** Looking into the drain of M₂, the device is degenerated only by the small resistance seen at M₁'s source (1/g_m1 ∥ r_O1), not by r_O1 itself:\n\n  R_out ≈ [1 + g_m2·(1/g_m1 ∥ r_O1)]·r_O2 ≈ (1 + g_m2/g_m1)·r_O2 ≈ 2r_O2\n\n  This is far below the g_m2·r_O2·r_O1 of a real cascode.\n\nSo the circuit lacks the defining cascode property of a boosted output impedance.",
        "format": "markdown",
        "sha256": "b7d8335f566e812b5e1665702af22411ec1a15261b2608f7ec6ae2e6bbb0f31b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower, so the circuit is not a cascode and lacks cascode output-resistance boosting. Its output-resistance discussion is consistent with the golden solution.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 3560,
        "total_tokens": 5086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2933,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 3560,
        "total_tokens": 5086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2933,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, this is not a cascode.**\n\n**Reading the symbols**\n\n- M2 is an NMOS: its source arrow (bottom terminal) points outward. Its gate is at the bias V_b1 and its drain is at V_out.\n- M1 is a PMOS: its source arrow (top terminal) points inward. Its gate is at V_in, its source is tied to the source of M2, and its drain is grounded.\n\n**Why it is not a cascode**\n\nIn a cascode, the input transistor is a common-source device. It converts V_in to a current at its drain, and that drain feeds the source of the common-gate (cascode) transistor.\n\nHere, the source of M1, not its drain, connects to the source of M2. With its drain at ground, M1 is a source follower. The circuit is therefore a source follower (M1) driving a common-gate stage (M2).\n\n**Consequences**\n\n- **Gain:** The follower's output resistance (1/g_m1) forms a divider with the common-gate input resistance (1/g_m2), neglecting channel-length modulation. The gain is non-inverting and modest:\n\n  A_v ≈ R_D / (1/g_m1 + 1/g_m2)\n\n- **Output impedance:** M2 is degenerated only by the low resistance seen at M1's source, about 1/g_m1. Looking into M2's drain, the resistance is roughly r_o2(1 + g_m2/g_m1), which is about 2r_o2 for equal transconductances. A true cascode would give about g_m2·r_o2·r_o1.\n\nSo the circuit has neither the connection nor the high output impedance of a cascode.",
        "format": "markdown",
        "sha256": "29237f7ef79c4ae962a17a8d576f1973c7a2fe47a1cce5594ec42d944f4ee4a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower with its drain grounded and M2 as a common-gate stage, explaining why this is not a cascode and lacks cascode output-resistance boosting. The additional gain and output-resistance approximations are consistent with the stated assumptions.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 2898,
        "total_tokens": 4424,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2370,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 2898,
        "total_tokens": 4424,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2370,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Recap of the Miller effect\n\nIn a common-emitter (or common-source) stage, the collector–base capacitance C_μ (or C_gd) connects the input node to the output node. Because the output swings in the opposite direction with gain −A, the voltage across that capacitor changes by (1 + A) times the input change. The source must therefore supply (1 + A) times the charge, so the capacitor looks like\n\nC_in,Miller = C_μ (1 + A), where A = g_m R_L\n\nWith a gain of 100 or more, a few pF becomes hundreds of pF, which forms a low-frequency pole with the source resistance and limits bandwidth.\n\n## What the cascode changes\n\nA cascode stacks a common-base (or common-gate) transistor Q2 on top of the input transistor Q1:\n\n```\n        Vcc\n         |\n         RL\n         |------ Vout   (large swing here)\n        Q2   base at fixed bias (AC ground)\n         |------ node X (tiny swing here)\n        Q1\nVin ----|\n         |\n        GND\n```\n\n1. **Q1 sees a very low load impedance.** The load on Q1's collector is no longer R_L but the impedance looking into Q2's emitter, about 1/g_m2. The gain from Q1's base to its own collector (node X) is therefore\n\n   A_1 ≈ −g_m1 · (1/g_m2) ≈ −1\n\n   since both transistors carry the same current. The Miller-multiplied capacitance is only C_μ1(1 + 1) = 2C_μ1 instead of C_μ1(1 + g_m R_L).\n\n2. **The large voltage swing occurs where it cannot couple back to the input.** Q2 passes Q1's signal current up to R_L, so the overall gain is still about −g_m1 R_L. But the large swing is at Q2's collector, and Q2's C_μ runs from that node to its base, which is at AC ground. That capacitor simply loads the output. It does not bridge input and output, so it is not multiplied.\n\nIn short, Q2 holds Q1's collector voltage nearly constant, shielding the input-side feedback capacitor from the large output swing while still delivering the full signal current to the load.\n\n## Example\n\nTake g_m = 40 mS, R_L = 5 kΩ (gain ≈ 200), and C_μ = 2 pF:\n\n- Common emitter: C_Miller ≈ 2 pF × 201 ≈ 400 pF\n- Cascode: C_Miller ≈ 2 pF × 2 = 4 pF\n\n## Why \"less pronounced\" rather than \"eliminated\"\n\n- A Miller factor of about 2 remains.\n- In MOS cascodes with a high-impedance load, such as a current source, the impedance looking into Q2's source is roughly (R_L + r_o2)/(1 + g_m2 r_o2). This can be noticeably greater than 1/g_m2, so the gain at node X, and with it the Miller multiplication, rises somewhat.",
        "format": "markdown",
        "sha256": "72c5e34cb8371683051f1c5b23e5eba01f38d7932d95e6d9d6b87982e170a950"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the roughly unity-magnitude gain across the input transistor’s feedback capacitance, giving a Miller factor of about 2 rather than the full-stage gain. It also correctly notes the effect is reduced, not eliminated; the high-load caveat is appropriate.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 2067,
        "total_tokens": 2097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1084,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 2067,
        "total_tokens": 2097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1084,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** The Miller effect multiplies a feedback capacitance by (1 + the voltage gain across it). A cascode keeps the gain across the input transistor's feedback capacitance near 1 and moves the large voltage swing to a node whose capacitance goes to AC ground rather than back to the input.\n\n## The Miller effect in a plain stage\n\nIn a common-source (or common-emitter) amplifier, C_gd (or C_μ) connects the input directly to the output. With a gain of −A, a change of v at the input produces a change of (1 + A)·v across that capacitor, so the source must supply (1 + A) times the charge:\n\nC_in ≈ C_gs + C_gd(1 + g_m·R_L)\n\nWith g_m·R_L of 50 or 100, a tiny capacitance looks large and forms a low-frequency pole with the source resistance.\n\n## What the cascode changes\n\nA cascode stacks a common-gate (common-base) transistor M2 on top of the input transistor M1, with M2's gate held at a fixed bias voltage.\n\n1. **M1's drain barely moves.** The load M1 sees is the source of M2, a low impedance of about 1/g_m2. The gain from M1's gate to M1's drain is therefore about −g_m1/g_m2 ≈ −1. The Miller factor drops from (1 + g_m·R_L) to about 2, so C_in ≈ C_gs1 + 2·C_gd1.\n\n2. **The overall gain is preserved.** M1 acts as a transconductor, and its current g_m1·v_in passes through M2 (a current buffer) into the load. The output is still v_out ≈ −g_m1·R_L·v_in, but the large swing now appears at M2's drain, not M1's.\n\n3. **The capacitance at the high-swing node is not a feedback path.** C_gd2 runs from the output to M2's gate, which is AC ground. It simply adds to the load capacitance, with no multiplication and no path back to the input.\n\nThe Miller effect needs a capacitor bridging two nodes and a large inverting gain between those same nodes. The cascode separates the two: the bridging capacitor (C_gd1) sees a gain of about 1, and the node with large gain has no capacitor back to the input.\n\n## Why \"less pronounced\" rather than \"eliminated\"\n\n- A factor of about 2 on C_gd1 remains.\n- The impedance looking into M2's source is actually (R_L + r_o2)/(1 + g_m2·r_o2). This is about 1/g_m2 only when R_L is small compared with r_o2. With a very high-impedance load, such as a cascoded current source, M1's drain swings more and some Miller multiplication returns.",
        "format": "markdown",
        "sha256": "0c778f141b713d255f3872eecda0b6657bbe201071859636c90f5e68f5c8c0ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that M2 presents a low impedance at M1’s drain, limiting the gain across Cgd1 to about −1 and its Miller factor to about 2, while the large swing occurs at the output. The high-load caveat is also appropriate; “barely moves” slightly overstates the effect, but the quantitative explanation is sound.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 3528,
        "total_tokens": 3558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 3528,
        "total_tokens": 3558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is weaker in a cascode because the input transistor has almost no voltage gain across its feedback capacitance, and that gain is what the capacitance gets multiplied by.\n\n**The Miller effect**\n\nA capacitance C_f connected between the input and output of an inverting amplifier looks, from the input, like a larger capacitance:\n\nC_in = C_f (1 + |A_v|)\n\nHere A_v is the voltage gain between the two nodes the capacitor bridges. In a plain common-emitter (or common-source) stage, the capacitor is C_cb (or C_gd), and the gain across it is the full stage gain, −g_m R_L. A gain of 100 makes a 1 pF capacitor look like about 101 pF, which forms a low-pass filter with the source resistance and limits the bandwidth.\n\n**What the cascode changes**\n\nIn a cascode, the input transistor's collector does not connect to the load. It connects to the emitter of a second, common-base (or common-gate) transistor, and the impedance looking into that emitter is low, about 1/g_m2. So the gain from the input transistor's base to its own collector is:\n\nA_v1 ≈ −g_m1 · (1/g_m2) ≈ −1\n\nBoth transistors carry the same current, so their transconductances are roughly equal. The Miller capacitance is then only about C_f (1 + 1) = 2C_f, instead of C_f (1 + g_m R_L).\n\n**Where the gain comes from**\n\nThe overall gain is still about −g_m1 R_L. The input transistor converts the input voltage to a current, and the upper transistor passes that current to the load, where the large voltage swing appears.\n\nThe upper transistor has a feedback capacitance too, but its base (or gate) is at AC ground. Its capacitance therefore runs from the output to ground rather than from the output back to the input. It loads the output node but is not multiplied.\n\n**Why the effect is reduced, not eliminated**\n\n- The input capacitance still includes about 2C_f.\n- The impedance at the intermediate node is only about 1/g_m2 when the load resistance is modest. In MOSFET cascodes with very high-impedance loads, such as current-source loads, the impedance looking into the upper transistor's source rises. The gain at the intermediate node then exceeds 1, and some Miller multiplication returns.",
        "format": "markdown",
        "sha256": "2e13fb145d83745a4dbc76479ef8cebad6040e6df07d53c4aa3fb14d7eeaec73"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance intermediate node, the roughly −1 gain across the input transistor’s feedback capacitance, and the resulting roughly 2× Miller multiplication while overall gain remains large. The opening phrase “almost no voltage gain” slightly overstates the reduction, but the answer’s quantitative explanation corrects it.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 2414,
        "total_tokens": 2444,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1649,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 2414,
        "total_tokens": 2444,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1649,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\n- **M1** is a PMOS with its source at V_DD and its gate at a fixed bias V_b2, so it acts as a current-source (active) load.\n- **M2** is an NMOS with its gate at a fixed bias V_b1 (AC ground), the input applied at its source and the output taken at its drain.\n\nThis is a **common-gate amplifier with a current-source load**: non-inverting, low input impedance, high output impedance.\n\n## DC (bias) analysis\n\n- M1 sets the bias current: I_D ≈ ½ μpCox (W/L)₁ (V_DD − V_b2 − |V_THp|)².\n- The same current flows V_DD → M1 → M2 → out through the V_in terminal, so the input source must provide a DC path that sinks I_D.\n- M2 has V_GS2 = V_b1 − V_in, and must satisfy I_D = ½ μnCox (W/L)₂ (V_b1 − V_in − V_THn)².\n\nSaturation conditions:\n\n- M1: V_out ≤ V_b2 + |V_THp|\n- M2: V_out ≥ V_b1 − V_THn\n\nSo the output swing is V_b1 − V_THn ≤ V_out ≤ V_b2 + |V_THp|.\n\nNote that if V_in, V_b1 and V_b2 are all fixed voltages, two current sources are fighting at a high-impedance node. The DC level of V_out is then set only by channel-length modulation, so in practice it needs feedback or a current-source bias at the input.\n\n## Small-signal analysis\n\nM1 has its gate and source at AC ground, so it reduces to r_o1 from the output to ground. For M2, v_gs2 = −v_in.\n\nKCL at the output node:\n\nv_out/r_o1 + (v_out − v_in)/r_o2 − g_m2·v_in = 0\n\n**Voltage gain**\n\nA_v = v_out/v_in = (1 + g_m2 r_o2) · r_o1/(r_o1 + r_o2) ≈ g_m2 (r_o1 ∥ r_o2), which is positive (non-inverting).\n\n**Input resistance** (looking into the source of M2)\n\nR_in = (r_o1 + r_o2)/(1 + g_m2 r_o2) ≈ (1/g_m2)(1 + r_o1/r_o2)\n\nBecause the load r_o1 is comparable to r_o2, R_in is larger than the usual 1/g_m2. For example, it is about 2/g_m2 if r_o1 = r_o2.\n\n**Output resistance**\n\n- Driven by an ideal voltage source: R_out = r_o1 ∥ r_o2\n- Driven through a source resistance R_S: R_out = r_o1 ∥ [r_o2 + (1 + g_m2 r_o2) R_S]\n\n**Gain with source resistance R_S**\n\nv_out/v_s = (1 + g_m2 r_o2) r_o1 / [r_o1 + r_o2 + (1 + g_m2 r_o2) R_S]\n\n**Special cases**\n\n- λ = 0 for M2 only (r_o2 → ∞): A_v = g_m2 r_o1, R_in = 1/g_m2, R_out = r_o1.\n- λ = 0 for both: the gain is ideally infinite (g_m2 times an ideal current-source load).\n- Body effect (M2 bulk grounded): replace g_m2 with g_m2 + g_mb2 everywhere.\n\n## Frequency response (first order)\n\n- Input pole: ω_in ≈ 1/[(R_S ∥ R_in)(C_GS2 + C_SB2)], which is roughly g_m2/(C_GS2 + C_SB2) when R_S is large and r_o2 is neglected.\n- Output pole: ω_out ≈ 1/[R_out (C_GD2 + C_DB2 + C_GD1 + C_DB1 + C_L)].\n- The gate of M2 is at AC ground, so there is no Miller multiplication. The high-impedance output node normally gives the dominant pole.",
        "format": "markdown",
        "sha256": "c3a47ca363f68498d8c42b50e40b3e544be14ff65c559f6e1acf0a5726149d50"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage, source-driven input, PMOS current-source load, non-inverting gain, and low input resistance. The gain expression matches the required approximation; the additional analyses do not contradict the essential result.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1338,
        "output_tokens": 9922,
        "total_tokens": 11260,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1338,
        "output_tokens": 9922,
        "total_tokens": 11260,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n- **M2 (NMOS)**: its gate is held at the DC voltage V_b1 (AC ground), the signal is applied to its source and the output is taken at its drain. This is a **common-gate (CG) amplifier**.\n- **M1 (PMOS)**: its source is at V_DD and its gate is at the DC voltage V_b2, so it is a **current-source (active) load**. Since v_gs1 = 0 for signals, it reduces to r_O1 from the output node to AC ground.\n\nSo this is a common-gate stage with a current-source load: non-inverting, low input resistance, high output resistance, high voltage gain.\n\n## 2. Bias conditions\n\n- M1 sets the bias current: I_D ≈ ½ μ_p C_ox (W/L)_1 (V_DD − V_b2 − |V_THP|)²\n- M2 must carry the same current, with V_GS2 = V_b1 − V_in. This current flows out of M2's source, so the input source must sink it.\n- M1 is saturated if V_out ≤ V_b2 + |V_THP|.\n- M2 is saturated if V_out ≥ V_b1 − V_THN.\n\nThe allowable output range is therefore V_b1 − V_THN ≤ V_out ≤ V_b2 + |V_THP|.\n\n## 3. Small-signal analysis (both devices saturated, body effect neglected)\n\nWith the gate of M2 grounded, v_gs2 = −v_in. KCL at the output node gives\n\nv_out/r_O1 + (v_out − v_in)/r_O2 − g_m2·v_in = 0\n\n**Voltage gain**\n\nA_v = v_out/v_in = (1 + g_m2 r_O2) · r_O1/(r_O1 + r_O2) ≈ g_m2 (r_O1 ‖ r_O2)\n\nThe gain is positive: when V_in rises, V_GS2 falls, I_D2 falls, and M1 pulls V_out up.\n\n**Input resistance** (looking into the source of M2)\n\nR_in = (r_O1 + r_O2)/(1 + g_m2 r_O2) ≈ 1/g_m2 + r_O1/(g_m2 r_O2)\n\nThis is larger than 1/g_m2 because the high-impedance load is reflected to the source; for r_O1 ≈ r_O2 it is about 2/g_m2.\n\n**Output resistance**\n\n- Driven by an ideal voltage source: R_out = r_O1 ‖ r_O2\n- Driven through a source resistance R_S: R_out = r_O1 ‖ [r_O2 + (1 + g_m2 r_O2) R_S]\n\n**Gain including a source resistance R_S**\n\nv_out/v_s = (1 + g_m2 r_O2) r_O1 / [r_O1 + r_O2 + (1 + g_m2 r_O2) R_S]\n\n## 4. Special cases\n\n| Assumption | A_v | R_in | R_out |\n|---|---|---|---|\n| λ = 0 for M2 only | g_m2 r_O1 | 1/g_m2 | r_O1 |\n| λ = 0 for M1 only (ideal current source) | 1 + g_m2 r_O2 | ∞ | r_O2 |\n| λ = 0 for both | ∞ | ∞ | ∞ |\n\nIf the body of M2 is tied to ground rather than to its source, replace g_m2 with g_m2 + g_mb2 in all expressions.\n\n## 5. Remarks\n\n- The gain is on the order of the intrinsic gain g_m r_O, the same magnitude as a common-source stage with a current-source load, but non-inverting.\n- The output node is high-impedance, with two current sources facing each other, so its DC level is sensitive to mismatch between V_b1 and V_b2. In practice it is set by feedback or by a defined bias current at the source of M2.",
        "format": "markdown",
        "sha256": "5cd59d6ae2153cdd8253bad4f2ae4c869f93f817e6cc055f556e7f3e777e6e2b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, recognizes Vb1/Vb2 as biases, and gives the non-inverting gain and low input resistance. The gain expression matches the required result; extra detail does not contradict the topology or gain mechanism.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1338,
        "output_tokens": 12362,
        "total_tokens": 13700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1338,
        "output_tokens": 12362,
        "total_tokens": 13700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\n- **M2** is an NMOS device (its source arrow points out toward V_in). Its gate is held at the DC voltage V_b1, the signal enters at the source and the output is taken at the drain, so it is a **common-gate (CG) amplifier**.\n- **M1** is a PMOS device with its source at V_DD and its gate at the DC voltage V_b2, so it is a **current-source (active) load**.\n\nThe circuit is therefore a common-gate stage with a PMOS current-source load. Since the question is open-ended, I give the bias conditions, gain, and input/output resistances below.\n\n## Bias (large-signal) conditions\n\n- M1 sets the bias current: I_D ≈ ½ μpCox (W/L)₁ (V_DD − V_b2 − |V_THP|)².\n- The same current flows through M2 and out of the V_in terminal, so the signal source must sink I_D. This requires a DC input level of V_in = V_b1 − V_THN − V_OV2, where V_OV2 = √(2I_D / (μnCox (W/L)₂)).\n- M1 is saturated if V_out ≤ V_b2 + |V_THP|.\n- M2 is saturated if V_out ≥ V_b1 − V_THN.\n\nThe allowable output range is therefore\n\n**V_b1 − V_THN ≤ V_out ≤ V_b2 + |V_THP|**\n\n## Small-signal analysis\n\nM1 has v_sg1 = 0, so it reduces to r_o1 from the output to ac ground. M2 has v_gs2 = −v_in, with r_o2 between output and input.\n\nKCL at the output node:\n\nv_out/r_o1 + (v_out − v_in)/r_o2 − g_m2·v_in = 0\n\n**Voltage gain**\n\nA_v = v_out/v_in = (1 + g_m2 r_o2)·r_o1 / (r_o1 + r_o2) ≈ **g_m2 (r_o1 ‖ r_o2)**\n\nThe gain is positive (non-inverting). Its magnitude is the same as that of a common-source stage with a current-source load.\n\n**Input resistance** (looking into the source of M2)\n\nR_in = (r_o1 + r_o2) / (1 + g_m2 r_o2) ≈ 1/g_m2 + r_o1/(g_m2 r_o2)\n\nBecause the load is a high impedance, R_in is larger than the usual 1/g_m2. For r_o1 ≈ r_o2 it is about 2/g_m2.\n\n**Output resistance**\n\n- Driven by an ideal voltage source: R_out = r_o1 ‖ r_o2.\n- Driven by a source with resistance R_S: R_out = r_o1 ‖ [r_o2 + (1 + g_m2 r_o2) R_S].\n\n**Gain with source resistance R_S**\n\nv_out/v_s = (1 + g_m2 r_o2)·r_o1 / [r_o1 + r_o2 + (1 + g_m2 r_o2) R_S]\n\n## Special cases\n\n| Assumption | A_v | R_in | R_out |\n|---|---|---|---|\n| λ = 0 for M2 only (r_o2 → ∞) | g_m2 r_o1 | 1/g_m2 | r_o1 |\n| M1 ideal current source (r_o1 → ∞) | 1 + g_m2 r_o2 | ∞ | r_o2 |\n| λ = 0 for both | → ∞ (output level undefined) | — | ∞ |\n\nIf the body of M2 is grounded (body effect), replace g_m2 with g_m2 + g_mb2 in all expressions.\n\n## Remarks\n\n- With g_m2 = √(2μnCox(W/L)₂ I_D) and r_o = 1/(λI_D), the gain is A_v ≈ √(2μnCox(W/L)₂ / I_D) / (λn + λp). It rises as the bias current is reduced.\n- The output is a high-impedance node whose DC level is set by two current sources balancing each other. It is sensitive to mismatch between V_b1, V_b2 and the input DC level, so in practice it is usually set by feedback.\n- Compared with a common-source stage, this circuit has low input impedance and no inversion.",
        "format": "markdown",
        "sha256": "34677de69331018e8cdd781cdaf79af8e00071fd5964560c471205c63165c796"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, source-applied input, non-inverting gain, low input resistance, and the required gain expression. Additional details do not contradict the essential analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1338,
        "output_tokens": 15077,
        "total_tokens": 16415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1338,
        "output_tokens": 15077,
        "total_tokens": 16415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Two poles.**\n\nIn the small-signal picture, M₂ is just a current-source load: its gate and source are both at AC ground. That means C_GD2 and C_DB2 both sit between the output node and ground, in parallel with C_DB. The circuit therefore reduces to three capacitors:\n\n- C_GS, from the gate of M₁ (node X) to ground\n- C_GD, from node X to the output\n- C_out = C_DB + C_GD2 + C_DB2, from the output to ground\n\nThese three form a closed loop, so their voltages are not independent: V_CGD = V_X − V_out. Only two of the three voltages can be set independently, so the circuit is second-order.\n\nThe exact transfer function confirms this, with R_out = r_o1 ‖ r_o2:\n\n$$\\frac{V_{out}}{V_{in}}(s)=\\frac{(C_{GD}s-g_m)R_{out}}{as^2+bs+1}$$\n\nwhere\n\n- a = R_S R_out (C_GS C_GD + C_GS C_out + C_GD C_out)\n- b = (1 + g_m R_out) C_GD R_S + R_S C_GS + R_out (C_GD + C_out)\n\nThe denominator is second-order, giving two poles — roughly one associated with the input node and one with the output node. There is also one zero at s = g_m/C_GD.",
        "format": "markdown",
        "sha256": "a34293bc3065ad283a52b4b6b2cdb3a4c31256d01fe69dec4b3c3a92a6c32869"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent nodes and assigns the capacitors to them; the added transfer function is also consistent with the circuit and has a second-order denominator.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1908,
        "output_tokens": 1590,
        "total_tokens": 3498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1144,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1908,
        "output_tokens": 1590,
        "total_tokens": 3498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1144,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The circuit has two poles.**\n\n**Reasoning:**\n\n- The gate and source of M₂ are both at AC ground, so M₂ acts only as a current-source load (its output resistance r_O2). \n- C_GD2 and C_DB2 therefore both connect from the output node to AC ground, which puts them in parallel with C_DB. They merge into a single capacitor: C_out = C_DB + C_GD2 + C_DB2.\n- This leaves three capacitors:\n  - C_GS from the gate node to ground,\n  - C_GD from the gate node to the output,\n  - C_out from the output to ground.\n- These three form a closed loop, so their voltages are not independent: once two are set, the third is fixed. Only two independent state variables exist, so the transfer function is second order.\n\nThe result is the standard common-source response with R_L = r_O1 ∥ r_O2:\n\n$$\\frac{V_{out}}{V_{in}}(s)=\\frac{(C_{GD}s-g_{m1})R_L}{as^2+bs+1}$$\n\nwhere\n\n- a = R_S R_L (C_GS C_GD + C_out C_GD + C_GS C_out)\n- b = (1 + g_m1 R_L) C_GD R_S + R_S C_GS + R_L (C_GD + C_out)\n\nSo there are two poles, plus one zero at s = g_m1/C_GD.",
        "format": "markdown",
        "sha256": "9b3ea173e8bf3564f4970618814fe3cbd22274cd4b3a2aca6a112fa49ea13804"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent dynamic nodes (M1’s gate and the output), assigns the capacitances to the right nodes, and concludes there are two poles. The added transfer-function expression is also consistent with the stated model.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1908,
        "output_tokens": 2003,
        "total_tokens": 3911,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1547,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1908,
        "output_tokens": 2003,
        "total_tokens": 3911,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1547,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Two poles.**\n\nIn the small-signal picture, M₂'s gate and source are both at AC ground, so M₂ is just a current-source load (its output resistance r_O2 appears in parallel with r_O1).\n\n- **Output node:** C_GD2 and C_DB2 both run from the output to AC ground, so they sit in parallel with C_DB. They merge into one capacitor, C_out = C_DB + C_GD2 + C_DB2.\n- **Input node (gate of M₁):** C_GS goes to ground, driven through R_S.\n- **Bridging:** C_GD connects the input node to the output node.\n\nThe circuit therefore reduces to three capacitors: C_GS, C_GD and C_out. These three form a closed loop, so only two of their voltages are independent. The transfer function is second-order: two poles, plus one zero from the feedforward path through C_GD at s = g_m1/C_GD.",
        "format": "markdown",
        "sha256": "465bad523f43c15c238b85a6c7f3aa61139ad5a9cd5cacdcb39c7c92c1d7b469"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles from the gate and output nodes, assigns the capacitors to the right nodes, and recognizes that the bridging C_GD couples the nodes rather than adding a third pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1908,
        "output_tokens": 3207,
        "total_tokens": 5115,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2906,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1908,
        "output_tokens": 3207,
        "total_tokens": 5115,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2906,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit looks like a cascode, but it is not one: M1 always operates in the triode region, and the M1–M2 stack behaves like a single, longer transistor in a common-source stage with load R_D. I assume square-law devices with λ = γ = 0 unless noted.\n\n**1. Operating regions**\n\nLet X be the node between M1 and M2.\n\n- For M2 to conduct, V_GS2 = V_in − V_X > V_TH, so V_X < V_in − V_TH.\n- But V_DS1 = V_X and V_GS1 − V_TH = V_in − V_TH, so V_DS1 < V_GS1 − V_TH. M1 is therefore always in triode.\n- M2 is in saturation as long as V_out > V_in − V_TH.\n\n**2. Bias current**\n\nLet β₁ = μₙC_ox(W/L)₁, β₂ = μₙC_ox(W/L)₂ and V_ov = V_in − V_TH.\n\n- M1 (triode): I_D = β₁[V_ov·V_X − V_X²/2] = (β₁/2)[V_ov² − (V_ov − V_X)²]\n- M2 (saturation): I_D = (β₂/2)(V_ov − V_X)²\n\nEquating the two gives\n\n(V_ov − V_X)² = V_ov²·β₁/(β₁+β₂), so V_X = V_ov[1 − √(β₁/(β₁+β₂))]\n\nI_D = ½·[β₁β₂/(β₁+β₂)]·(V_in − V_TH)²\n\nThis is the square law of one saturated transistor with\n\n1/(W/L)_eq = 1/(W/L)₁ + 1/(W/L)₂\n\nFor identical devices, the pair equals one transistor of W/(2L):\n\n- I_D = ¼·μₙC_ox(W/L)(V_in − V_TH)²\n- V_X = (1 − 1/√2)·V_ov ≈ 0.29·V_ov\n- V_out = V_DD − R_D·I_D\n\n**3. Small-signal gain**\n\nDifferentiating V_out with respect to V_in:\n\nA_v = −G_m·R_D, with G_m = μₙC_ox(W/L)_eq(V_in − V_TH) = √(2μₙC_ox(W/L)_eq·I_D)\n\nFor identical devices:\n\nA_v = −½·μₙC_ox(W/L)(V_in − V_TH)·R_D = −√(μₙC_ox(W/L)·I_D)·R_D\n\nThis is half the gain of a single-transistor stage at the same V_in, or 1/√2 of it at the same bias current.\n\nA small-signal model gives the same result. With g_m1 = β₁V_X, g_ds1 = β₁(V_ov − V_X) and g_m2 = β₂(V_ov − V_X), KCL at X gives\n\nG_m = g_m2·(g_m1 + g_ds1)/(g_m2 + g_ds1) = [β₁β₂/(β₁+β₂)]·V_ov\n\n**4. Output resistance (λ ≠ 0)**\n\nM2 is degenerated by the triode resistance of M1, r_ds1 = 1/g_ds1:\n\nR_out = R_D ∥ [r_o2 + r_ds1 + g_m2·r_o2·r_ds1]\n\nSince g_m2·r_ds1 = β₂/β₁ (equal to 1 for identical devices), the resistance looking into M2's drain is only about 2r_o2. That is what a transistor of length 2L would give, not the g_m·r_o² of a true cascode.\n\n**5. Limits**\n\n- V_in < V_TH: both devices are off and V_out = V_DD.\n- V_out < V_in − V_TH: M2 also enters triode, and the pair acts as a triode device with the same (W/L)_eq.\n- With body effect, V_TH2 > V_TH1, which pushes M1 further into triode; the conclusions are unchanged.",
        "format": "markdown",
        "sha256": "b21880c814353b84035a224bd59641d6668fba9e903231f7f162b1acf3198ba7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS stack, with M1 in triode and M2 saturated, and derives the equivalent aspect ratio as the reciprocal sum of the two devices’ W/L values—equivalent to a channel length L1+L2 for equal widths. The gain and modest output-resistance increase are also consistent with the golden solution.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 6639,
        "total_tokens": 8170,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5314,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 6639,
        "total_tokens": 8170,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5314,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Summary:** this is a common-source stage with a resistive load in which M1 always operates in the triode region, and the M1–M2 stack behaves as a single transistor of greater length (2L for identical devices). It looks like a cascode but is not one.\n\nI assume square-law devices with equal V_TH and λ = γ = 0, and write k_i = μnCox(W/L)_i, V_ov = V_in − V_TH, and X for the node between M1 and M2.\n\n## 1. Regions of operation\n\n- **M1 is always in triode.** For M2 to conduct, V_GS2 = V_in − V_X > V_TH, so V_X < V_in − V_TH. Since V_X = V_DS1 and V_in = V_GS1, this means V_DS1 < V_GS1 − V_TH.\n- **M2 is saturated** when V_DS2 > V_GS2 − V_TH, i.e. when V_out > V_in − V_TH. This is the same condition as for a simple CS stage.\n\n## 2. Bias (large-signal) solution with M2 saturated\n\nEquating the two drain currents:\n\n- M1 (triode): I_D = k₁[V_ov·V_X − V_X²/2] = ½k₁[V_ov² − (V_ov − V_X)²]\n- M2 (saturation): I_D = ½k₂(V_ov − V_X)²\n\nSolving gives:\n\n- V_ov − V_X = V_ov·√(k₁/(k₁+k₂)), so V_X = V_ov[1 − √(k₁/(k₁+k₂))]\n- **I_D = ½ μnCox (W/L)_eq (V_in − V_TH)²**, with (W/L)_eq = (W/L)₁(W/L)₂ / [(W/L)₁ + (W/L)₂]\n- V_out = V_DD − R_D·I_D\n\nFor equal widths, L_eq = L₁ + L₂. For identical devices, V_X ≈ 0.29·V_ov and I_D = ¼μnCox(W/L)V_ov².\n\n## 3. Transfer characteristic\n\n- V_in < V_TH: both devices off, V_out = V_DD.\n- V_in > V_TH and V_out > V_in − V_TH: V_out = V_DD − ½μnCox(W/L)_eq·R_D·(V_in − V_TH)².\n- V_out < V_in − V_TH: both devices in triode. The stack still acts as one triode device with (W/L)_eq, and V_out approaches V_DD·R_on/(R_on + R_D), where R_on = R_on1 + R_on2.\n\n## 4. Small-signal gain\n\nDifferentiating the bias result:\n\n**A_v = −μnCox (W/L)_eq (V_in − V_TH) R_D = −R_D·√(2μnCox(W/L)_eq·I_D)**\n\nThe small-signal model gives the same answer. M1 in triode has g_m1 = k₁V_X and R_on1 = 1/[k₁(V_ov − V_X)]; M2 has g_m2 = k₂(V_ov − V_X). KCL at X:\n\ng_m2(v_in − v_x) = g_m1·v_in + v_x/R_on1\n\nwhich leads to\n\nG_m = g_m2(1 + g_m1R_on1)/(1 + g_m2R_on1) = [k₁k₂/(k₁+k₂)]·V_ov\n\nand A_v = −G_m·R_D.\n\nFor identical devices, A_v = −g_m2·R_D/√2 = −½μnCox(W/L)(V_in − V_TH)R_D. This is half the gain of a single-transistor stage at the same V_in, or 1/√2 of it at the same bias current.\n\n## 5. Second-order effects\n\n- **Channel-length modulation (λ ≠ 0):** the resistance looking into M2's drain is r_o2 + R_on1 + g_m2·r_o2·R_on1. Since g_m2·R_on1 = (W/L)₂/(W/L)₁, identical devices give about 2r_o2. So R_out ≈ R_D ∥ 2r_o2, which is what a device of length 2L would give, not the g_m·r_o² boost of a true cascode.\n- **Body effect (γ ≠ 0):** V_SB2 = V_X > 0 raises V_TH2. This lowers the current slightly and keeps M1 even more firmly in triode.",
        "format": "markdown",
        "sha256": "ed0323eda7885a0c68365e5ac57fa4fd3f9f3d0a7034cd32ec969d68aae57c2a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS stack, with M1 in triode and M2 saturated, and explains that it behaves approximately like a single device with effective channel length L1 + L2 for equal widths. The additional gain and output-resistance analysis is consistent with that mechanism.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 9876,
        "total_tokens": 11407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8407,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 9876,
        "total_tokens": 11407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8407,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Summary:** this is a common-source stage, not a cascode. Because the two gates are tied together, M1 always operates in the triode region, and the M1–M2 stack behaves as a single transistor with (L/W)eq = (L/W)₁ + (L/W)₂, i.e. length 2L for identical devices.\n\nThe problem statement was not included, so I assume the usual simplifications: λ = γ = 0, equal thresholds V_TH, and V_ov ≡ Vin − V_TH.\n\n## 1. Regions of operation\n\n- **M1:** for M2 to conduct, V_GS2 = Vin − V_X > V_TH, so V_X < Vin − V_TH (V_X is the M1 drain / M2 source node). This means V_DS1 < V_GS1 − V_TH, so M1 is in triode whenever current flows. Body effect on M2 only strengthens this.\n- **M2:** it is saturated when Vout − V_X > Vin − V_X − V_TH, i.e. Vout > Vin − V_TH. This is the same condition as for a single transistor.\n\n## 2. Bias (large-signal) solution\n\nWith k₁ = (W/L)₁ and k₂ = (W/L)₂:\n\n- M1 (triode): I_D = ½ μnCox k₁ [V_ov² − (V_ov − V_X)²]\n- M2 (saturation): I_D = ½ μnCox k₂ (V_ov − V_X)²\n\nEquating the two currents gives:\n\n- V_X = V_ov [1 − √(k₁/(k₁+k₂))], which is about 0.29 V_ov for identical devices\n- I_D = ½ μnCox (W/L)eq (Vin − V_TH)², with (W/L)eq = k₁k₂/(k₁+k₂)\n- Vout = V_DD − ½ μnCox (W/L)eq R_D (Vin − V_TH)²\n\nFor equal widths, (W/L)eq = W/(L₁+L₂); for identical devices it is W/2L.\n\n## 3. Small-signal gain\n\nDifferentiating Vout with respect to Vin:\n\n**A_v = −μnCox (W/L)eq (Vin − V_TH) R_D = −√(2 μnCox (W/L)eq I_D) · R_D = −2 I_D R_D / (Vin − V_TH)**\n\nThe small-signal model gives the same result. M1 in triode has g_m1 = μnCox k₁ V_X and channel conductance g_ds1 = 1/R_on1 = μnCox k₁ (V_ov − V_X). M2 has g_m2 = μnCox k₂ (V_ov − V_X). KCL at node X:\n\ng_m1 v_in + g_ds1 v_x = g_m2 (v_in − v_x)\n\nThis leads to:\n\nG_m = g_m2 (g_m1 + g_ds1)/(g_m2 + g_ds1) = μnCox (W/L)eq V_ov\n\nand A_v = −G_m R_D. For identical devices, g_ds1 = g_m2, so G_m = (g_m1 + g_m2)/2.\n\nA common mistake is to treat M1 as only a degeneration resistor, giving g_m2/(1 + g_m2 R_on1). That underestimates G_m, because M1's gate is also driven by the input.\n\n## 4. Vout versus Vin\n\n- **Vin < V_TH:** both devices are off and Vout = V_DD.\n- **V_TH < Vin < Vin1:** M1 is in triode, M2 is saturated, and Vout follows the parabola above. This is the amplifying region.\n- **Vin > Vin1:** both devices are in triode. Vin1 is where Vout = Vin1 − V_TH, which gives Vin1 − V_TH = [−1 + √(1 + 2βR_D V_DD)]/(βR_D) with β = μnCox (W/L)eq. The stack still acts as one device: V_DD − Vout = R_D β [(Vin − V_TH)Vout − Vout²/2]. For large Vin, Vout ≈ V_DD · R_on/(R_on + R_D) with R_on = 1/[β(Vin − V_TH)].\n\n## 5. Remarks\n\n- **Output resistance:** with λ = 0, Rout = R_D. With channel-length modulation in M2, the resistance looking into M2's drain is r_o2 + R_on1 + g_m2 r_o2 R_on1, about 2r_o2 for identical devices. This is what a 2L device gives, not the g_m r_o² of a true cascode.\n- **Comparison with a single transistor of W/L:** for identical devices, the stack has half the g_m (and half the current) at the same overdrive, or 1/√2 of the g_m at the same current. Stacking does not increase the gain.\n- **Body effect:** if M2's body is grounded, V_TH2 > V_TH1. M1 remains in triode and the single-transistor equivalence becomes approximate.\n- **Use:** the structure is mainly a way to build a long-channel device from unit transistors, for example for matching in current mirrors.",
        "format": "markdown",
        "sha256": "21563364ad4f173c629163c177cee2e77472a6c65590d5bd38f5ee1da956a31a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS structure, places M1 in triode and M2 in saturation, and derives the key equivalent channel length as L1 + L2 for equal widths. The gain and output-resistance analysis is consistent with the stated assumptions and the golden solution.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 12466,
        "total_tokens": 13997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10760,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 12466,
        "total_tokens": 13997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10760,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** the circuit is a source follower (M₁) driving a common-gate stage (M₂), and its small-signal gain is non-inverting, $A_v = \\dfrac{R_D}{1/g_{m1}+1/g_{m2}}$, which is $g_mR_D/2$ for matched devices. Since the question is open-ended, I assume the gain is the main goal and add the other key properties below.\n\n## 1. Topology\n\n- **M₁**: gate is the input, drain is at V_DD (ac ground), and the signal is taken at the source, so it is a source follower.\n- **M₂**: gate is at the fixed bias V_b (ac ground), the signal enters at the source, and the output is at the drain across R_D, so it is a common-gate stage.\n- **I₁**: ideal tail current source, so $I_{D1}+I_{D2}=I_1$.\n\nEquivalently, this is a differential pair driven on one side with a single-ended output.\n\n## 2. Bias\n\nLet P be the common source node.\n\n- $V_{out}=V_{DD}-R_DI_{D2}$ and $V_P=V_b-V_{GS2}$.\n- If the DC level of V_in equals V_b and the devices are identical, $I_{D1}=I_{D2}=I_1/2$ and $V_{out}=V_{DD}-R_DI_1/2$.\n- M₁ is always saturated because its drain is at V_DD.\n- M₂ is saturated if $V_{out}\\ge V_b-V_{TH}$.\n- V_P must leave enough voltage across I₁.\n\n## 3. Small-signal gain (λ = 0, γ = 0)\n\nWith an ideal current-source load, the follower M₁ has a Thevenin equivalent at P of $v_{in}$ in series with $1/g_{m1}$. This drives the source of M₂, whose input resistance is $1/g_{m2}$:\n\n$$v_P=\\frac{1/g_{m2}}{1/g_{m1}+1/g_{m2}}\\,v_{in},\\qquad v_{out}=g_{m2}R_D\\,v_P$$\n\n$$A_v=\\frac{v_{out}}{v_{in}}=\\frac{R_D}{\\dfrac1{g_{m1}}+\\dfrac1{g_{m2}}}=\\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}}$$\n\nFor matched devices, $g_{m1}=g_{m2}=g_m=\\sqrt{\\mu_nC_{ox}(W/L)\\,I_1}$, so\n\n$$A_v=\\frac{g_mR_D}{2}$$\n\nThis is half the gain of a common-source stage with the same device and load, and it is non-inverting.\n\n## 4. Refinements\n\n- **Body effect (λ = 0):** $A_v=\\dfrac{g_{m1}(g_{m2}+g_{mb2})R_D}{g_{m1}+g_{mb1}+g_{m2}+g_{mb2}}$. For matched devices this is still $g_mR_D/2$.\n- **Channel-length modulation:** with $G_i=g_{mi}+g_{mbi}$,\n$$A_v=\\frac{g_{m1}R_D(1+G_2r_{o2})}{(G_1+1/r_{o1})(R_D+r_{o2})+1+G_2r_{o2}}$$\n- **Input resistance:** infinite at low frequency.\n- **Output resistance:** $R_D$ for λ = 0. Otherwise $R_D\\parallel\\left[r_{o2}+(1+G_2r_{o2})\\left(r_{o1}\\parallel 1/G_1\\right)\\right]\\approx R_D\\parallel 2r_{o2}$.\n\n## 5. Large-signal behaviour\n\nFor matched square-law devices, with $\\Delta V=V_{in}-V_b$ and $k=\\mu_nC_{ox}W/L$:\n\n$$V_{out}=V_{DD}-\\frac{R_DI_1}{2}+\\frac{R_Dk}{4}\\,\\Delta V\\sqrt{\\frac{4I_1}{k}-\\Delta V^2},\\qquad |\\Delta V|\\le\\sqrt{\\frac{2I_1}{k}}$$\n\n- For V_in well below V_b, M₁ is off and $V_{out}=V_{DD}-R_DI_1$.\n- For V_in well above V_b, M₂ is off and $V_{out}=V_{DD}$.\n- The slope at ΔV = 0 is $g_mR_D/2$, which agrees with the small-signal result.\n\n## 6. Frequency response\n\nLet $C_P$ be the capacitance from P to ac ground ($C_{GS2}+C_{SB1}+C_{SB2}$ plus the tail source) and $C_{out}=C_{GD2}+C_{DB2}+C_L$. For an ideal voltage source at the input:\n\n$$A_v(s)=\\frac{g_{m2}R_D\\,(g_{m1}+sC_{GS1})}{\\left[g_{m1}+g_{m2}+s(C_{GS1}+C_P)\\right](1+sR_DC_{out})}$$\n\n- **Output pole:** $1/(R_DC_{out})$, usually dominant.\n- **Pole at P:** $(g_{m1}+g_{m2})/(C_{GS1}+C_P)$, near $f_T$.\n- **No Miller multiplication:** C_GD1 goes to V_DD and C_GD2 goes to V_b, both ac grounds.\n- **Input capacitance:** about $C_{GD1}+C_{GS1}/2$, because C_GS1 is bootstrapped by the follower action. With source resistance R_S, the input pole is about $1/[R_S(C_{GD1}+C_{GS1}/2)]$.",
        "format": "markdown",
        "sha256": "4e2dcc578349c7b51647d95ffbe942e744ddc7c726eef44b679184e59c8509a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as a source follower driving M₂ as a common-gate stage, equivalently a source-coupled pair, and gives the correct non-inverting gain. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2477,
        "output_tokens": 14271,
        "total_tokens": 16748,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12310,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2477,
        "output_tokens": 14271,
        "total_tokens": 16748,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12310,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**What the circuit is.** M1 is a source follower (drain at V_DD) driving M2, a common-gate stage (gate at the fixed bias V_b, load R_D), with both sources tied at a node P biased by I₁. Equivalently, it is a differential pair driven on one side with a single-ended output. It is a non-inverting amplifier with gain g_mR_D/2 for matched devices.\n\nI assume both transistors are in saturation and I₁ is ideal.\n\n## 1. Bias and large-signal behaviour\n\nLet ΔV = V_in − V_b and β = μₙC_ox(W/L), with matched square-law devices. Since I_D1 + I_D2 = I₁, the input steers the tail current between the two transistors:\n\n| Input | Currents | V_out |\n|---|---|---|\n| V_in ≪ V_b | M1 off, I_D2 = I₁ | V_DD − I₁R_D |\n| V_in = V_b | I_D1 = I_D2 = I₁/2 | V_DD − I₁R_D/2 |\n| V_in ≫ V_b | M2 off, I_D1 = I₁ | V_DD |\n\nIn between, for |ΔV| ≤ √(2I₁/β):\n\n$$V_{out}=V_{DD}-\\frac{R_D}{2}\\left[I_1-\\frac{\\beta}{2}\\,\\Delta V\\sqrt{\\frac{4I_1}{\\beta}-\\Delta V^2}\\right]$$\n\n- **Node P:** V_P = V_b − V_GS2, which must leave enough headroom for I₁.\n- **M2 saturation:** V_out ≥ V_b − V_TH; at equilibrium this is V_DD − I₁R_D/2 ≥ V_b − V_TH.\n- **M1 saturation:** guaranteed while V_in ≤ V_DD + V_TH.\n\n## 2. Small-signal gain (λ = γ = 0)\n\n1. The resistance looking into the source of M2 is 1/g_m2, so the follower gives v_P/v_in = g_m1/(g_m1 + g_m2).\n2. The common-gate stage gives v_out/v_P = g_m2R_D.\n\n$$A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}}=\\frac{R_D}{1/g_{m1}+1/g_{m2}}$$\n\nFor matched devices at ΔV = 0, A_v = g_mR_D/2 with g_m = √(βI₁). This agrees with the slope of the large-signal expression above.\n\nWith body effect and channel-length modulation:\n\n$$A_v=\\frac{g_{m1}R_D\\,[1+(g_{m2}+g_{mb2})r_{o2}]}{(g_{m1}+g_{mb1}+1/r_{o1})(r_{o2}+R_D)+1+(g_{m2}+g_{mb2})r_{o2}}$$\n\nAs r_o → ∞ this reduces to g_m1(g_m2 + g_mb2)R_D/(g_m1 + g_mb1 + g_m2 + g_mb2).\n\n## 3. Port resistances\n\n- **Input:** R_in = ∞ at low frequency (gate input).\n- **Output:** R_out = R_D for λ = 0. Otherwise\n\n$$R_{out}=R_D\\,\\Big\\|\\,\\Big\\{r_{o2}+[1+(g_{m2}+g_{mb2})r_{o2}]\\Big(\\tfrac{1}{g_{m1}+g_{mb1}}\\Big\\|r_{o1}\\Big)\\Big\\}$$\n\nFor matched devices this is roughly R_D ∥ 2r_o2.\n\n## 4. Frequency response\n\nWith an ideal input source and λ = γ = 0:\n\n$$A_v(s)=\\frac{g_{m2}R_D\\,(g_{m1}+sC_{GS1})}{[\\,g_{m1}+g_{m2}+s(C_{GS1}+C_P)\\,](1+sR_DC_{out})}$$\n\nHere C_P = C_GS2 + C_SB1 + C_SB2 + C_tail and C_out = C_GD2 + C_DB2 + C_L.\n\n- **Output pole:** 1/(R_DC_out), usually dominant.\n- **Pole at P:** (g_m1 + g_m2)/(C_GS1 + C_P), near f_T.\n- **Zero:** a left-half-plane zero at g_m1/C_GS1.\n- **Input pole with source resistance R_S:** about 1/{R_S[C_GD1 + C_GS1·g_m2/(g_m1 + g_m2)]}.\n\nThere is no Miller multiplication: C_GD1 goes to ac ground (V_DD), C_GD2 goes to ac ground (V_b), and C_GS1 is bootstrapped by the follower. The circuit is therefore much faster than a common-source stage driven from a high source impedance.\n\n## 5. Noise\n\nInput-referred thermal noise, with λ = 0:\n\n$$\\overline{V_{n,in}^2}=4kT\\gamma\\left(\\frac{1}{g_{m1}}+\\frac{1}{g_{m2}}\\right)+\\frac{4kT}{R_D}\\left(\\frac{1}{g_{m1}}+\\frac{1}{g_{m2}}\\right)^2+\\frac{\\overline{I_{n,tail}^2}}{g_{m1}^2}$$\n\nFor matched devices the first two terms become 8kTγ/g_m + 16kT/(g_m²R_D). Because the output is single-ended, tail-current noise is not rejected. Noise on V_b also appears directly, since the gain from V_b to the output is −A_v.\n\n## Summary\n\nCompared with a common-source stage using the same device g_m, this circuit has half the gain, twice the transistor noise power and twice the bias current. In exchange it gives non-inverting gain, a high-impedance input with small input capacitance, no Miller effect, and bias currents set by I₁ rather than by the input dc level.",
        "format": "markdown",
        "sha256": "4fdf8f53f5f9b9b2ff36ae4284b8f3e87b651acbdaea03085a0959bfb45d19e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower driving M2 in common-gate, equivalently a source-coupled differential pair, and gives the non-inverting matched-device gain. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2477,
        "output_tokens": 12508,
        "total_tokens": 14985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2477,
        "output_tokens": 12508,
        "total_tokens": 14985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Assumptions:** the figure comes with no problem statement, so I assume both transistors are in saturation, I₁ is an ideal current source, and (at first) λ = 0 with no body effect.\n\n## 1. What the circuit is\n\n- **M₁** (gate = input, drain at V_DD) is a source follower.\n- **M₂** (gate at the fixed bias V_b, output at the drain) is a common-gate stage.\n- **I₁** is the tail current source.\n\nIt is a source follower driving a common-gate stage. Equivalently, it is a differential pair with one input at AC ground and a single-ended output. The gain is non-inverting.\n\n## 2. Bias (DC)\n\n- I_D1 + I_D2 = I₁. If the DC level of V_in equals V_b and the devices are matched, I_D1 = I_D2 = I₁/2.\n- V_P = V_b − V_GS2 = V_b − V_TH − √(2I_D2 / (μₙC_ox(W/L)₂))\n- V_out = V_DD − R_D·I_D2, which is V_DD − R_D·I₁/2 at balance.\n- M₂ is in saturation if V_DD − R_D·I_D2 ≥ V_b − V_TH.\n- M₁ is in saturation whenever V_in ≤ V_DD + V_TH, since its drain is at V_DD.\n\n## 3. Small-signal gain (λ = 0)\n\nKCL at the common source node P, with the tail open for small signals:\n\ng_m1(v_in − v_P) − g_m2·v_P = 0, so v_P = v_in · g_m1/(g_m1 + g_m2)\n\nM₂ then acts as a common-gate stage: v_out = g_m2·R_D·v_P.\n\n**A_v = v_out/v_in = g_m1·g_m2·R_D / (g_m1 + g_m2) = R_D / (1/g_m1 + 1/g_m2)**\n\nFor matched devices, g_m1 = g_m2 = g_m:\n\n**A_v = +g_m·R_D/2**, with g_m = √(μₙC_ox(W/L)·I₁)\n\nIntuitively, M₁ is degenerated by the resistance 1/g_m2 seen looking into M₂'s source. Its effective transconductance is therefore g_m1/(1 + g_m1/g_m2), and that current flows through M₂ into R_D.\n\n## 4. Input and output resistance\n\n- R_in = ∞ at low frequency (gate input).\n- R_out = R_D for λ = 0.\n\n## 5. With channel-length modulation (λ ≠ 0)\n\n- A_v = g_m1·R_D·(1 + g_m2·r_o2) / [(1 + g_m2·r_o2) + (g_m1 + 1/r_o1)(r_o2 + R_D)]\n- R_out = R_D ‖ [r_o2 + (1 + g_m2·r_o2)(r_o1 ‖ 1/g_m1)] ≈ R_D ‖ 2r_o2 for matched devices\n\nThe gain expression reduces to the result in section 3 as r_o → ∞.\n\nWith body effect, replace g_m2 by g_m2 + g_mb2 and add g_mb1 to the conductance at node P.\n\n## 6. Large-signal behaviour\n\nWith ΔV = V_in − V_b, the pair steers I₁ between the two transistors:\n\n- V_in ≪ V_b: M₁ is off, M₂ carries all of I₁, and V_out = V_DD − R_D·I₁.\n- V_in ≫ V_b: M₂ is off and V_out = V_DD.\n- Full steering occurs at |ΔV| = √(2I₁ / (μₙC_ox·W/L)).\n\nThe output rises monotonically with V_in, and its slope at ΔV = 0 is g_m·R_D/2, consistent with section 3.\n\n## 7. High-frequency behaviour\n\nWith an ideal voltage source at the input:\n\n- **Pole at node P:** ω_p1 = (g_m1 + g_m2)/C_P, where C_P = C_GS1 + C_GS2 + C_SB1 + C_SB2 plus the tail-source capacitance. This pole is near f_T.\n- **Pole at the output:** ω_p2 = 1/[R_D(C_GD2 + C_DB2 + C_L)]. This is usually the dominant pole.\n- **Zero:** ω_z = g_m1/C_GS1, in the left half-plane, from feedforward through C_GS1.\n\nIf the source has resistance R_S, there is also an input pole at approximately 1/[R_S(C_GD1 + C_GS1·g_m2/(g_m1 + g_m2))].\n\nNeither C_GD is Miller-multiplied, because C_GD1 goes to V_DD and C_GD2 goes to V_b, both AC grounds. Compared with a common-source stage using the same R_D, this circuit has half the gain and uses twice the bias current, but it is non-inverting and has a much smaller input capacitance.",
        "format": "markdown",
        "sha256": "3cf764df652015fb6539a8ca621e31aa2fb1e23801172dbd04a7e80161369e54"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a source follower driving a common-gate stage (equivalently, a source-coupled pair) and gives the non-inverting gain. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2477,
        "output_tokens": 9009,
        "total_tokens": 11486,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2477,
        "output_tokens": 9009,
        "total_tokens": 11486,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** because of M₁'s gate-source capacitance C_GS, the impedance seen at the output rises from 1/g_m at low frequency to R_S at high frequency. If R_S > 1/g_m, an impedance that increases with frequency behaves like an inductor.\n\n**Intuition**\n\nSet V_in = 0 and look into the output node, which is the source of M₁. M₂ is a current source, so ideally it is an open circuit for small signals.\n\n- **Low frequencies:** C_GS is an open circuit, so no current flows through R_S and the gate sits at ac ground. The output sees the usual source-follower impedance, Z_out ≈ 1/g_m.\n- **High frequencies:** C_GS shorts the gate to the source, so v_GS ≈ 0 and the transistor's current source g_m·v_GS is disabled. The test source simply sees R_S through the capacitor, Z_out ≈ R_S.\n\nIn between, C_GS and R_S form a voltage divider that makes the gate increasingly follow the source. This reduces v_GS, so the transistor's ability to hold the output node weakens and the impedance climbs.\n\n**Derivation**\n\nNeglect channel-length modulation, body effect and C_GD. Apply a test voltage V_X at the output, drawing current I_X.\n\nThe gate voltage follows from the R_S–C_GS divider, so\n\nv_GS = V_G − V_X = −V_X / (1 + R_S C_GS s)\n\nKCL at the output node gives\n\nI_X = −(g_m + C_GS s)·v_GS\n\nCombining the two:\n\nZ_out = V_X / I_X = (R_S C_GS s + 1) / (g_m + C_GS s)\n\n- At s → 0, Z_out = 1/g_m.\n- At s → ∞, Z_out = R_S.\n- The zero is at ω_z = 1/(R_S C_GS) and the pole at ω_p = g_m/C_GS.\n\nIf R_S > 1/g_m, the zero lies below the pole. Between them |Z_out| increases with frequency and its phase is positive (voltage leads current), which is inductive behavior.\n\n**Equivalent circuit**\n\nThe expression can be rewritten exactly as\n\nZ_out = 1/g_m + [(R_S − 1/g_m) ∥ sL], with L = (C_GS / g_m)(R_S − 1/g_m)\n\nThis is a resistor 1/g_m in series with the parallel combination of a resistor (R_S − 1/g_m) and an inductor L. The inductance is positive only when R_S > 1/g_m, which is typical when the follower is driven by a high-impedance stage. If R_S < 1/g_m, the impedance instead falls with frequency and looks capacitive.\n\nA practical consequence is that this inductive output impedance can resonate with a load capacitance, causing peaking in the frequency response or ringing in the step response.",
        "format": "markdown",
        "sha256": "be7497955ecbc2c29bcef0253b43488b602e356e83882aa879d133552aedd848"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains the low-frequency 1/g_m to high-frequency R_S transition as C_GS shorts the gate to the source, and identifies the rising, inductive behavior when R_S > 1/g_m. The impedance expression and equivalent circuit are also correct.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1720,
        "output_tokens": 4405,
        "total_tokens": 6125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1720,
        "output_tokens": 4405,
        "total_tokens": 6125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance can look inductive because of the gate‑source capacitance C_GS of M₁ together with the source resistance R_S: when R_S > 1/g_m, the impedance rises with frequency, as an inductor's does.\n\n**Derivation**\n\nSet V_in = 0, treat M₂ as an ideal current source (open for small signals), and neglect channel-length modulation, body effect and C_GD. Apply a test voltage V_X at the output.\n\n- C_GS and R_S form a divider from the source to the gate, so\n\n  V_GS = −V_X / (1 + sR_S C_GS)\n\n- The current drawn from the test source is the transistor current plus the current through C_GS:\n\n  I_X = −(g_m + sC_GS)·V_GS\n\n- Therefore\n\n  **Z_out = V_X / I_X = (1 + sR_S C_GS) / (g_m + sC_GS)**\n\n**Interpretation**\n\n- At low frequencies C_GS is open, no current flows in R_S, the gate is at ac ground, and Z_out ≈ 1/g_m.\n- At high frequencies C_GS shorts gate to source, V_GS → 0, the transistor no longer responds, and the test source simply sees Z_out ≈ R_S.\n\nIf R_S > 1/g_m (a follower driven by a high-impedance stage), |Z_out| increases with frequency from 1/g_m to R_S. Its phase, tan⁻¹(ωR_S C_GS) − tan⁻¹(ωC_GS/g_m), is positive. Rising magnitude with positive phase is inductive behavior. If R_S < 1/g_m, the impedance falls with frequency and looks capacitive instead.\n\n**Physical intuition**\n\nThe R_S–C_GS network low-pass filters the gate-source voltage, so V_GS lags the voltage applied at the output. The transistor converts this delayed voltage into current: I ≈ g_m V_X / (1 + sR_S C_GS). At high frequencies this is roughly g_m V_X / (sR_S C_GS), a current proportional to the integral of the voltage, which is how an inductor behaves.\n\n**Equivalent circuit**\n\nSubtracting 1/g_m from Z_out shows that the impedance is exactly:\n\n- a resistor R₂ = 1/g_m, in series with\n- the parallel combination of R₁ = R_S − 1/g_m and an inductor L = (C_GS/g_m)(R_S − 1/g_m).\n\nL is positive only when R_S > 1/g_m.\n\nA practical consequence is that this inductance can resonate with a capacitive load at the output, causing peaking or ringing in the follower's response.",
        "format": "markdown",
        "sha256": "812876640f2db9abe8157052f616424e2a0d7366e07a9dbc5be5dcc139f0b2ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives Zout and explains its transition from 1/gm at low frequency to RS at high frequency as CGS shorts gate to source. It identifies the inductive rise for RS > 1/gm and the capacitive case otherwise.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1720,
        "output_tokens": 3252,
        "total_tokens": 4972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2368,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1720,
        "output_tokens": 3252,
        "total_tokens": 4972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2368,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** this is a source follower driven from a finite source resistance R_S. Its output impedance is 1/g_m at low frequencies and rises toward R_S at high frequencies, because C_GS of M₁ progressively shorts the gate to the source. If R_S > 1/g_m, the impedance increases with frequency, which is the behaviour of an inductor.\n\n**Derivation**\n\nSet V_in = 0 and treat M₂ as an ideal current source. Neglect channel-length modulation, body effect and C_GD for simplicity. Apply a test voltage V_X at the output, drawing current I_X.\n\n- The current through C_GS also flows through R_S, so the gate voltage is V_G = V_X · sR_SC_GS / (1 + sR_SC_GS).\n- The gate-source voltage is therefore V_GS = V_G − V_X = −V_X / (1 + sR_SC_GS).\n- KCL at the output gives I_X = −(g_m + sC_GS)·V_GS.\n\nCombining these:\n\n$$Z_{out}=\\frac{V_X}{I_X}=\\frac{1+sR_SC_{GS}}{g_m+sC_{GS}}$$\n\n**Interpretation**\n\n- As s → 0, Z_out → 1/g_m. C_GS is open, no current flows in R_S, the gate is at ac ground, and we see the usual follower output resistance.\n- As s → ∞, Z_out → R_S. C_GS shorts gate to source, so V_GS → 0 and the transistor no longer responds. The output node simply sees R_S through C_GS.\n\nThe impedance has a zero at 1/(R_SC_GS) and a pole at g_m/C_GS. If R_S > 1/g_m, the zero comes first, so |Z_out| rises with frequency and its phase is positive (voltage leads current). That is an inductive impedance. Since followers are normally used as buffers for high-impedance sources, R_S > 1/g_m is the typical case.\n\n**Physical intuition**\n\nThe drain current of M₁ in response to V_X is\n\n$$I_{M1}=\\frac{g_mV_X}{1+sR_SC_{GS}}$$\n\nAt higher frequencies this approaches g_mV_X/(sR_SC_GS), so the current is proportional to the integral of the voltage. That is exactly what an inductor does. The transistor, together with R_S and C_GS, converts the capacitance into an effective inductance.\n\n**Equivalent circuit**\n\nZ_out can be written exactly as a resistor R₂ in series with the parallel combination of R₁ and L, where:\n\n- R₂ = 1/g_m\n- R₁ = R_S − 1/g_m\n- L = (C_GS/g_m)(R_S − 1/g_m)\n\nL is positive only if R_S > 1/g_m, which confirms the condition. If R_S < 1/g_m, the impedance falls with frequency and looks capacitive instead.\n\n**Practical consequence**\n\nWhen the follower drives a load capacitance, this inductive output impedance can resonate with it, causing peaking in the frequency response and ringing in the step response.",
        "format": "markdown",
        "sha256": "af94cfeb4a91cc411b4aadabefde99b7e39b5850526dca033020ffa85d2e8473"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the output impedance, explaining its rise from 1/g_m to R_S as C_GS shorts gate to source. It gives the correct inductive condition R_S > 1/g_m.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1720,
        "output_tokens": 4488,
        "total_tokens": 6208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1720,
        "output_tokens": 4488,
        "total_tokens": 6208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** this is a transimpedance stage with voltage-current (shunt-shunt) feedback, but the feedback is positive, so the circuit behaves as a latch rather than a usable amplifier.\n\n**Assumptions:** both devices are NMOS in saturation, and λ = 0 for M1 (otherwise replace R_D1 by R_D1‖r_o1). I keep r_o2 because it is the only resistance at node X.\n\n**1. Topology**\n\n- M1 with R_D1 is a common-source stage, the forward amplifier: V_out = −g_m1 R_D1 · V_X.\n- M2 is the feedback device. Its gate senses V_out, and its drain returns a current g_m2 V_out to the input node X.\n- Voltage is sensed and current is returned, so the input is I_in and the output is V_out.\n\n**2. Polarity of feedback**\n\nTrace a change around the loop:\n\nI_in ↑ → V_X ↑ → V_out ↓ (M1 inverts) → I_D2 ↓ (M2 draws less current from X) → V_X ↑ further.\n\nThe loop contains two inversions, so the returned signal reinforces the original change. The feedback is positive.\n\n**3. Open-loop quantities**\n\nBreak the loop in the usual way for this topology:\n\n- Open-loop gain: R_0 = V_out/I_in = −g_m1 R_D1 r_o2\n- Open-loop input resistance: R_in,open = r_o2\n- Open-loop output resistance: R_out,open = R_D1\n- Feedback factor: K = I_F/V_out = g_m2\n- Loop gain: K R_0 = −g_m1 g_m2 R_D1 r_o2, which is negative, confirming positive feedback\n\n**4. Closed-loop results**\n\nThese follow from the feedback formulas and agree with direct KCL (at X: I_in = g_m2 V_out + V_X/r_o2).\n\n- V_out/I_in = R_0/(1 + K R_0) = −g_m1 R_D1 r_o2 / (1 − g_m1 g_m2 R_D1 r_o2)\n- R_in = r_o2 / (1 − g_m1 g_m2 R_D1 r_o2)\n- R_out = R_D1 / (1 − g_m1 g_m2 R_D1 r_o2)\n\nSince g_m1 g_m2 R_D1 r_o2 ≫ 1 in practice:\n\n- V_out/I_in ≈ +1/g_m2 (exactly 1/g_m2 if λ = 0)\n- R_in ≈ −1/(g_m1 g_m2 R_D1)\n- R_out ≈ −1/(g_m1 g_m2 r_o2), which tends to 0 as λ → 0\n\n**5. Interpretation**\n\n- The input and output resistances are negative because the loop gain magnitude exceeds 1.\n- With a capacitance C_X at node X, the pole is at s = (g_m1 g_m2 R_D1 − 1/r_o2)/C_X, which is in the right half-plane. Any disturbance grows exponentially.\n- M1 and M2 form a cross-coupled pair. A DC solution exists (I_D2 = I_in sets V_out = V_GS2), but it is an unstable equilibrium. The circuit regenerates until it latches in one of two states: V_out low with M2 off, or V_out high with M1 off.\n- The small-signal expressions above are therefore only formal; the circuit cannot hold that operating point.\n\n**6. Making the feedback negative**\n\nThe loop needs an odd number of inversions. Options include replacing M1 with a common-gate stage, adding a second inverting stage in the forward path, or returning the current through a resistor or source follower instead of a common-source device.",
        "format": "markdown",
        "sha256": "cf9287f9d30b0f6fb98ec80faf99ec43728ca383544c0ef46621a1d724808131"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as tied to Vout, traces the positive-feedback loop, and explains the resulting negative input resistance and unstable, latching behavior. The golden solution’s full-credit rule is satisfied.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 13956,
        "total_tokens": 16166,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12708,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 13956,
        "total_tokens": 16166,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12708,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** this circuit is wired as a voltage–current (shunt–shunt) feedback transimpedance amplifier, but the feedback is positive. It is in effect a cross-coupled pair, so it latches rather than amplifies.\n\n**Topology**\n\n- Forward amplifier: M1 and RD1 form a common-source stage, so v_out = −gm1·RD1·v_X.\n- Feedback network: M2 (gate at Vout, drain at X, source grounded). Its gate senses the output voltage and its drain current is returned to the input node in parallel with Iin, with feedback factor K = gm2.\n\n**Polarity**\n\nSuppose Iin increases. V_X rises, M1 draws more current, and Vout falls. V_GS2 then falls, so M2 pulls less current out of X and V_X rises further. The returned signal reinforces the original change (two inverting stages around the loop), so the feedback is positive.\n\n**Small-signal analysis** (λ = 0 for M1; rO2 kept so the open-loop gain is finite)\n\nOpen loop: R_in = rO2, R_out = RD1, R0 = −gm1·RD1·rO2. The loop gain is K·R0 = −gm1·gm2·RD1·rO2, which is negative.\n\nKCL at X gives i_in = v_X/rO2 + gm2·v_out. Substituting v_out = −gm1·RD1·v_X and writing T = gm1·gm2·RD1·rO2:\n\n- Vout/Iin = −gm1·RD1·rO2 / (1 − T)\n- R_in = rO2 / (1 − T)\n- R_out = RD1 / (1 − T)\n\nThe usual 1 + K·R0 has become 1 − T. Since T is the gain of the M1 stage times the intrinsic gain of M2, T ≫ 1 in practically any design (T → ∞ for λ = 0). Then:\n\n- Vout/Iin → +1/gm2\n- R_in → −1/(gm1·gm2·RD1)\n- R_out → −1/(gm1·gm2·rO2) ≈ 0\n\nThe input resistance is negative. With a capacitance C_X at node X, the pole is at s = (T − 1)/(rO2·C_X) > 0, in the right half-plane. So the bias point where I_D2 = Iin is unstable, and the expressions above describe an equilibrium the circuit will not stay at.\n\nOnly if T < 1 would the circuit be stable, and then the feedback would raise the gain and impedances instead of lowering them.\n\n**What actually happens**\n\nAny disturbance regenerates until the circuit settles in one of two states:\n\n- V_X low: M1 is off, Vout = VDD, and M2 sits in deep triode sinking Iin.\n- V_X high (limited by the current source's compliance): M1 is in deep triode, Vout is near ground, and M2 is off.\n\n**How to fix it**\n\nThe loop needs an odd number of inversions. Two options:\n\n- Replace M2 with a resistor RF from Vout to X, which gives Vout/Iin ≈ −RF.\n- Keep M2 but make the forward stage non-inverting: use M1 as a common-gate stage with Iin injected into its source. Then Vout/Iin = RD/(1 + gm2·RD), R_in = (1/gm1)/(1 + gm2·RD), and R_out = RD/(1 + gm2·RD).",
        "format": "markdown",
        "sha256": "faf80cbc23ae79eec2252b458c37a32a30469dc980678fc4d42310c9b33db7c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection, the positive-feedback loop, and the resulting negative input resistance and instability/latching. Minor optional analysis does not undermine the essential answer.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 16722,
        "total_tokens": 18932,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15593,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 16722,
        "total_tokens": 18932,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15593,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** this is a voltage-sensing, current-returning (shunt-shunt) feedback loop, but its polarity is positive. With typical device values the loop gain exceeds 1, so the circuit behaves as a latch rather than a transimpedance amplifier.\n\nI read the figure as M1 and M2 both NMOS with grounded sources, and took \"analyze\" to mean feedback type, polarity and small-signal behaviour.\n\n## 1. Topology\n\n- **Forward path:** M1 is a common-source stage with load R_D1. Its input is node X and its output is V_out.\n- **Feedback path:** M2 has its gate at V_out, so it senses the output voltage. Its drain is at X, so it returns a current to the input node, where it is summed with I_in.\n\nM1 and M2 form a cross-coupled pair: each gate is tied to the other transistor's drain.\n\n## 2. Feedback polarity\n\nTrace a change around the loop:\n\n1. I_in increases, so V_X rises (the extra current flows into the finite impedance at X).\n2. I_D1 increases, so V_out falls (common-source inversion).\n3. V_GS2 falls, so I_D2 decreases and M2 pulls less current out of X.\n4. V_X rises further.\n\nThe returned signal reinforces the original change, so the feedback is **positive**. The loop contains two inverting common-source stages.\n\n## 3. Small-signal analysis\n\nTake λ = 0 for M1 and keep r_O2 so that node X has a finite impedance.\n\n- Output: v_out = −g_m1 R_D1 v_X\n- KCL at X: i_in = g_m2 v_out + v_X / r_O2\n\nDefine the loop-gain magnitude T = g_m1 g_m2 R_D1 r_O2. Solving gives:\n\n- **Transimpedance:** v_out / i_in = −g_m1 R_D1 r_O2 / (1 − T)\n- **Input resistance:** R_in = r_O2 / (1 − T)\n- **Output resistance:** R_out = R_D1 / (1 − T)\n\nIn feedback terms, the open-loop gain is R_0 = −g_m1 R_D1 r_O2 and the feedback factor is K = g_m2. The product K·R_0 = −T is negative, so the usual denominator 1 + K·R_0 becomes 1 − T. This confirms positive feedback.\n\n## 4. Consequences\n\n- **T < 1:** the circuit is stable, but gain, R_in and R_out are all increased by 1/(1 − T). This is the opposite of what negative feedback does, and the gain becomes more sensitive to device parameters.\n- **T > 1:** this is the usual case, since T = (g_m1 R_D1)(g_m2 r_O2) is a product of two stage gains. The resistance seen at X is negative (it tends to −1/(g_m1 g_m2 R_D1) as r_O2 → ∞). With capacitances C_X at X and C_L at the output, the characteristic equation is\n\n  s² C_X C_L R_D1 r_O2 + s (C_X r_O2 + C_L R_D1) + (1 − T) = 0\n\n  The constant term is negative, so one pole lies in the right half-plane and the circuit regenerates. It ends in one of two states:\n  - V_X low: M1 is off, V_out = V_DD, and M2 is in deep triode sinking I_in.\n  - V_X high: M1 is in triode, V_out is near 0, M2 is off, and the current source runs out of headroom.\n\n- **Formal λ = 0 solution:** as r_O2 → ∞, v_out / i_in → +1/g_m2, because M2 must carry all of I_in. The corresponding bias point is V_out = V_GS2, I_D1 = (V_DD − V_GS2)/R_D1, V_X = V_GS1. This equilibrium is unstable.\n\n## 5. Making it negative feedback\n\nThe loop needs an odd number of inversions. Replacing M2 with a PMOS common-source device does not help, because a common-source stage inverts either way. Workable fixes are:\n\n- a non-inverting return path, such as a resistor R_F from V_out to X (giving v_out / i_in ≈ −R_F), or\n- one more inverting stage in the loop.",
        "format": "markdown",
        "sha256": "02363f41f8b56f2fdb842168f42b7837abd02803b649785497fb8f935bde5abe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2's gate at Vout (not diode-connected), traces the positive-feedback loop, and gives valid consequences including negative input resistance, instability, and latching. This meets the golden solution's full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 9308,
        "total_tokens": 11518,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7888,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 9308,
        "total_tokens": 11518,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7888,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Setup.** This is a two-stage transimpedance amplifier with voltage-current (shunt-shunt) feedback. I assume small-signal operation at low frequency, λ = 0, no body effect, and V_b at AC ground.\n\n## 1. Topology and feedback polarity\n\n- **Forward amplifier:** M1 with R_D1 is a common-gate stage (current in at the source, voltage out at X). M2 with R_D2 is a common-source stage.\n- **Feedback network:** R_F senses V_out in parallel and returns a current to the input node in parallel with I_in.\n- **Polarity:** If I_in rises, the source of M1 rises, I_D1 falls, V_X rises, and V_out falls. R_F then draws more current away from the input node, opposing the change. The feedback is negative.\n\n## 2. Open-loop amplifier, including loading by R_F\n\nTo break the loop for voltage-current feedback, short the output to find the input loading (R_F from the input node to ground), and short the input to find the output loading (R_F from the output to ground).\n\n- I_in divides between R_F and the 1/g_m1 seen at the source of M1. The fraction entering M1 is R_F/(R_F + 1/g_m1), and it flows through R_D1 to produce V_X.\n- M2 then gives V_out = −g_m2 (R_D2 ∥ R_F) V_X.\n\nOpen-loop transimpedance:\n\nR_0 = V_out/I_in = −[R_F/(R_F + 1/g_m1)] · R_D1 · g_m2 (R_D2 ∥ R_F)\n\nOpen-loop impedances:\n\n- R_in,open = (1/g_m1) ∥ R_F\n- R_out,open = R_D2 ∥ R_F\n\n## 3. Feedback factor and loop gain\n\nWith the input node shorted, i_RF = V_out/R_F flows into the input node. Taking the feedback current as the quantity subtracted from I_in:\n\nK = −1/R_F\n\nLoop gain:\n\nK·R_0 = g_m1 g_m2 R_D1 R_D2 R_F / [(1 + g_m1 R_F)(R_F + R_D2)]\n\nBoth K and R_0 are negative, so the loop gain is positive, which confirms negative feedback.\n\n## 4. Closed-loop results\n\nLet D = (1 + g_m1 R_F)(R_F + R_D2) + g_m1 g_m2 R_D1 R_D2 R_F.\n\n- **Transimpedance:** V_out/I_in = R_0/(1 + K R_0) = −g_m1 g_m2 R_D1 R_D2 R_F² / D\n- **Input resistance:** R_in = R_in,open/(1 + K R_0) = R_F (R_F + R_D2) / D\n- **Output resistance:** R_out = R_out,open/(1 + K R_0) = R_D2 R_F (1 + g_m1 R_F) / D\n\n## 5. Useful approximations\n\nIf R_F ≫ 1/g_m1 and R_F ≫ R_D2:\n\n- R_0 ≈ −g_m2 R_D1 R_D2\n- V_out/I_in ≈ −g_m2 R_D1 R_D2 / (1 + g_m2 R_D1 R_D2/R_F)\n- R_in ≈ (1/g_m1) / (1 + g_m2 R_D1 R_D2/R_F)\n- R_out ≈ R_D2 / (1 + g_m2 R_D1 R_D2/R_F)\n\nIf in addition the loop gain g_m2 R_D1 R_D2/R_F ≫ 1, then **V_out/I_in ≈ −R_F**. The gain is set by the feedback resistor alone, and both the input and output resistances are lowered by the loop gain, as expected for shunt-shunt feedback.\n\n## 6. Check against exact nodal analysis\n\nDirect KCL at the input and output nodes gives\n\nV_out/I_in = −R_D2 (g_m1 g_m2 R_D1 R_F − 1) / [1 + g_m1(R_F + R_D2) + g_m1 g_m2 R_D1 R_D2]\n\nThis agrees with the feedback-method result when g_m1 g_m2 R_D1 R_F ≫ 1, i.e. when direct feedforward through R_F is negligible. The only other difference is one R_D2 term in the denominator, which is negligible when R_F ≫ R_D2 or the loop gain is large.",
        "format": "markdown",
        "sha256": "e4c7e759cd77be42bd5f7e9813759cbe0dd8c937ebb5cb72a2f765680ccd51a5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from Vout to the input, forming a transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2517,
        "output_tokens": 10602,
        "total_tokens": 13119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9105,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2517,
        "output_tokens": 10602,
        "total_tokens": 13119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9105,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a transimpedance amplifier (current in, voltage out) with negative feedback through R_F. Its closed-loop gain is approximately −R_F, and the feedback lowers both the input and output resistance. Since no values or specific question were given, I analyze it at small-signal, low frequency, with λ = 0 and no body effect.\n\n## Structure\n\n- **M1** is a common-gate stage (gate held at V_b). I_in enters at its source and is delivered to R_D1.\n- **M2** is a common-source stage that amplifies V_X.\n- **R_F** senses V_out and returns a current i_RF to the input node. This is voltage-current (shunt-shunt) feedback.\n\n## Feedback polarity\n\nIf I_in rises, the source of M1 rises, M1's current drops, and V_X rises (the common-gate stage is non-inverting). M2 inverts, so V_out falls. The lower V_out pulls current away from the input node through R_F, opposing the original change. The feedback is therefore negative.\n\n## Open loop (R_F very large)\n\nI_in flows through M1 into R_D1, so:\n\n$$v_X = I_{in}R_{D1}, \\qquad v_{out} = -g_{m2}R_{D2}\\,v_X$$\n\n$$R_0 = \\frac{V_{out}}{I_{in}}\\bigg|_{open} = -g_{m2}R_{D1}R_{D2}, \\qquad R_{in,open} = \\frac{1}{g_{m1}}, \\qquad R_{out,open} = R_{D2}$$\n\n## Feedback factor and loop gain\n\nThe input node is low-impedance, so i_RF ≈ V_out/R_F. In the standard model the feedback current K·V_out is subtracted from I_in, whereas here i_RF is added to it, so K = −1/R_F. The loop gain is:\n\n$$KR_0 = \\frac{g_{m2}R_{D1}R_{D2}}{R_F}$$\n\n## Closed loop\n\n$$\\frac{V_{out}}{I_{in}} = \\frac{-g_{m2}R_{D1}R_{D2}}{1+\\dfrac{g_{m2}R_{D1}R_{D2}}{R_F}} \\;\\approx\\; -R_F \\quad \\text{(large loop gain)}$$\n\n$$R_{in} = \\frac{1/g_{m1}}{1+\\dfrac{g_{m2}R_{D1}R_{D2}}{R_F}}, \\qquad R_{out} = \\frac{R_{D2}}{1+\\dfrac{g_{m2}R_{D1}R_{D2}}{R_F}}$$\n\nIntuitively, with high loop gain the input node is a virtual ground and nearly all of I_in flows through R_F, giving V_out ≈ −I_in R_F.\n\n## Exact result (no \"large R_F\" assumption)\n\nWriting KCL at the input node, X, and the output gives the exact loop gain:\n\n$$T = \\frac{g_{m2}R_{D1}R_{D2}}{R_F + R_{D2} + 1/g_{m1}}$$\n\n$$\\frac{V_{out}}{I_{in}} = \\frac{-R_{D2}\\,(g_{m1}g_{m2}R_{D1}R_F - 1)}{1 + g_{m1}(R_F+R_{D2}) + g_{m1}g_{m2}R_{D1}R_{D2}}$$\n\n$$R_{in} = \\frac{(1/g_{m1}) \\parallel (R_F+R_{D2})}{1+T}, \\qquad R_{out} = \\frac{R_{D2} \\parallel (R_F + 1/g_{m1})}{1+T}$$\n\nThese reduce to the simpler expressions when R_F ≫ 1/g_m1 and R_F ≫ R_D2, which is what \"R_F very large\" means here.\n\n## Practical notes\n\n- If M1's body is grounded, replace g_m1 with g_m1 + g_mb1.\n- The loop contains three nodes (input, X, output), so it has three poles and its stability must be checked when the loop gain is high.\n- The figure shows only the signal source; M1 also needs a DC bias current path at its source.",
        "format": "markdown",
        "sha256": "f5161b3cfb5080b9ec01942ca3ac90d46e251cd60a8a52bb522289706d05c6f2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative shunt-shunt feedback from Vout to the input node, forming a transimpedance amplifier. The additional analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2517,
        "output_tokens": 17625,
        "total_tokens": 20142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16228,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2517,
        "output_tokens": 17625,
        "total_tokens": 20142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16228,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**What the circuit is.** This is a two-stage transimpedance amplifier with feedback. M1 is a common-gate stage (the input current enters its source), M2 is a common-source stage, and R_F senses the output voltage and returns a current to the input node. That is voltage-current (shunt-shunt) feedback.\n\nI assume small-signal, low-frequency operation with λ = 0 and no body effect. For the simple feedback analysis I also assume R_F is large (R_F ≫ 1/g_m1 and R_F ≫ R_D2), so it does not load the amplifier.\n\n**Feedback polarity.** If I_in increases, the source of M1 rises, I_D1 falls, and V_X rises. M2 then pulls V_out down, so R_F draws current away from the input node, opposing the change. The feedback is negative.\n\n**Open-loop quantities (R_F loading neglected).**\n\n- I_in flows through M1 into R_D1, so V_X = I_in·R_D1.\n- M2 gives V_out = −g_m2·R_D2·V_X.\n- Open-loop transimpedance: R_0 = V_out/I_in = −g_m2·R_D1·R_D2.\n- Open-loop input resistance: R_in,open = 1/g_m1 (looking into the source of M1).\n- Open-loop output resistance: R_out,open = R_D2.\n\n**Feedback factor.** Because the input node is a low-impedance point, i_RF ≈ V_out/R_F, and it adds to I_in. The current subtracted from I_in is therefore −V_out/R_F, so K = −1/R_F.\n\n**Loop gain.**\n\nK·R_0 = g_m2·R_D1·R_D2 / R_F\n\n**Closed-loop results.**\n\n- Transimpedance:\n  V_out/I_in = −g_m2·R_D1·R_D2 / (1 + g_m2·R_D1·R_D2/R_F)\n  This approaches −R_F when the loop gain is much greater than 1.\n- Input resistance:\n  R_in = (1/g_m1) / (1 + g_m2·R_D1·R_D2/R_F)\n- Output resistance:\n  R_out = R_D2 / (1 + g_m2·R_D1·R_D2/R_F)\n\nBoth impedances are lowered by the factor (1 + loop gain), as expected for shunt-shunt feedback.\n\n**Exact results for finite R_F.** Solving the node equations directly, without the large-R_F assumption, gives:\n\n- V_out/I_in = −R_D2·(g_m1·g_m2·R_D1·R_F − 1) / [1 + g_m1·(R_F + R_D2) + g_m1·g_m2·R_D1·R_D2]\n- R_in = (R_F + R_D2) / [1 + g_m1·(R_F + R_D2) + g_m1·g_m2·R_D1·R_D2]\n- R_out = R_D2 ∥ [(R_F + 1/g_m1) / (1 + g_m2·R_D1)]\n\nThese reduce to the feedback-analysis expressions when R_F ≫ 1/g_m1, R_F ≫ R_D2, and g_m2·R_D1 ≫ 1.",
        "format": "markdown",
        "sha256": "c4395469c30327b48fe1caf2a1ce936e5aaa79ecc1e681bb7830afbbf53fb57a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from Vout to the input, forming a transimpedance amplifier. The feedback polarity and high-loop-gain transimpedance are also correct.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2517,
        "output_tokens": 10258,
        "total_tokens": 12775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2517,
        "output_tokens": 10258,
        "total_tokens": 12775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Assumptions:** this is a small-signal, low-frequency analysis with both current sources ideal and body effect neglected. I call the unlabeled bottom source I_B and the input node (source of M1, drain of M2) X.\n\n## 1. What the circuit is\n\n- **Forward amplifier:** M1 is a common-gate stage (gate at V_b) loaded by I₁. It converts I_in to V_out, so it is a transimpedance amplifier.\n- **Feedback network:** M2 is a PMOS with its source at V_DD. Its gate senses V_out and its drain returns a current to X.\n- **Topology:** voltage-current (shunt-shunt) feedback. This stabilizes V_out/I_in and lowers both R_in and R_out.\n- **Polarity:** if I_in rises, V_X rises, V_GS1 falls, and V_out rises. Then V_SG2 falls, M2 delivers less current to X, and V_X falls. The feedback is negative.\n\n## 2. Bias point\n\n- I_D1 = I₁ and I_D2 = I_B − I₁ − I_in, so I_B must exceed I₁.\n- V_X = V_b − V_GS1, which is fixed because I_D1 is fixed.\n- V_out = V_DD − |V_GS2|.\n- M1 is saturated if V_out ≥ V_b − V_TH1; M2 is then automatically saturated.\n\n## 3. Open-loop circuit\n\nBreaking the loop with proper loading: M2's gate does not load the output, and M2 with its gate at ac ground places r_O2 at X.\n\n- **Input resistance:** R_in,open = r_O2, because a common-gate device with an ideal current-source load draws no signal current.\n- **Transimpedance:** I_in flows through r_O2, and M1 amplifies V_X by (1 + g_m1 r_O1), so\n  R₀ = (1 + g_m1 r_O1) r_O2 ≈ g_m1 r_O1 r_O2.\n- **Output resistance:** R_out,open = r_O1 + (1 + g_m1 r_O1) r_O2 ≈ g_m1 r_O1 r_O2.\n\n## 4. Feedback factor and loop gain\n\nM2 pulls a current g_m2·V_out out of node X, so K = g_m2.\n\nLoop gain: T = K R₀ = g_m2 r_O2 (1 + g_m1 r_O1) ≈ g_m1 g_m2 r_O1 r_O2.\n\n## 5. Closed-loop results\n\n- **Gain:** V_out/I_in = (1 + g_m1 r_O1) r_O2 / [1 + g_m2 r_O2 (1 + g_m1 r_O1)] ≈ **+1/g_m2**\n- **Input resistance:** R_in = r_O2 / (1 + T) ≈ **1/(g_m1 g_m2 r_O1)**\n- **Output resistance:** R_out = [r_O1 + (1 + g_m1 r_O1) r_O2] / (1 + T) ≈ **1/g_m2**\n\n**Check by direct KCL:**\n- Output node: −g_m1 V_X + (V_out − V_X)/r_O1 = 0, so V_out = (1 + g_m1 r_O1) V_X.\n- Node X: I_in = g_m2 V_out + V_X/r_O2.\n\nCombining these gives exactly the gain and R_in above, so the feedback method is exact here.\n\n**Example:** with g_m1 = g_m2 = 1 mS and r_O1 = r_O2 = 20 kΩ, R₀ = 420 kΩ and T = 420. Then V_out/I_in ≈ 998 Ω, R_in ≈ 48 Ω, and R_out ≈ 1.05 kΩ.\n\n## 6. Intuition and large-signal view\n\nBecause I₁ forces M1's current to be constant, V_X is pinned at V_b − V_GS1 and X is a virtual ground. All of I_in must be absorbed by M2:\n\nV_out = V_DD − |V_TH2| − √[2(I_B − I₁ − I_in) / (μ_p C_ox (W/L)₂)]\n\nThe slope of this is 1/g_m2, matching the small-signal result. The circuit works for I_in < I_B − I₁ (beyond that M2 turns off). For negative I_in, V_out can fall only until M1 enters the triode region.\n\n## 7. Remarks\n\n- **Body effect:** replace g_m1 with g_m1 + g_mb1.\n- **Non-ideal sources:** a finite output resistance in I_B appears in parallel with r_O2. A finite output resistance r₁ in I₁ loads the output and reduces R₀; if r₁ is comparable to r_O, the loop gain falls to roughly g_m2 r₁.\n- **Frequency response:** with C_L at the output and C_X at X, the loop has a dominant pole of about 1/(g_m1 r_O1 r_O2 C_L) and a second pole of about g_m1/C_X. The closed-loop response is approximately\n\n  V_out/I_in ≈ (1/g_m2) / [1 + s C_L/g_m2 + s² C_X C_L/(g_m1 g_m2)]\n\n  The bandwidth is about g_m2/C_L, and avoiding peaking requires g_m1/C_X ≳ 2 g_m2/C_L.",
        "format": "markdown",
        "sha256": "4bc34b664abee304277028bfb6f68893f897abdd1979a32c225cb9f59033ee86"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies the common-gate M1 input stage and PMOS M2 feedback path from Vout to the input node, and gives the key results: very low input resistance, Vout/Iin ≈ 1/gm2, and Rout ≈ 1/gm2. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2366,
        "output_tokens": 20947,
        "total_tokens": 23313,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2366,
        "output_tokens": 20947,
        "total_tokens": 23313,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Summary:** this is a transimpedance amplifier with negative voltage–current (shunt–shunt) feedback. Its closed-loop gain is V_out/I_in ≈ 1/g_m2, with a very low input resistance ≈ 1/(g_m2·g_m1 r_O1) and an output resistance ≈ 1/g_m2.\n\n## 1. Identifying the circuit\n\n- **Forward amplifier:** M1 (gate at V_b) is a common-gate stage loaded by the ideal current source I1. The input current enters at its source (node X) and the output voltage is taken at its drain.\n- **Feedback network:** M2 is a PMOS common-source device. Its gate senses V_out and its drain returns a current to node X.\n- **Feedback type:** voltage is sensed and current is returned, so this is voltage–current feedback. It stabilizes V_out/I_in and lowers both R_in and R_out.\n- **Polarity:** I_in↑ → V_X↑ → V_out↑ (the CG stage is non-inverting) → |V_GS2|↓ → M2 delivers less current to X → V_X↓. The feedback is negative.\n\n## 2. Bias\n\nCall the unlabeled bottom source I_B.\n\n- I_D1 = I1, and KCL at X gives |I_D2| = I_B − I1 − I_in, so I_B > I1 is required.\n- The loop sets V_out = V_DD − |V_GS2| by itself, and V_X = V_b − V_GS1.\n- M1 is saturated if V_b ≤ V_DD − |V_GS2| + V_TH1. M2 is then automatically saturated. V_X must also leave headroom for I_B.\n\n## 3. Open-loop parameters (feedback disabled, loading kept)\n\nWith M2's gate at ac ground, M2 appears as r_O2 from X to ground. Its gate does not load the output. Because I1 is ideal, M1 carries no signal current, so the resistance looking into its source is infinite and all of I_in flows through r_O2.\n\n```\nR_in,open  = r_O2\nR_0        = V_out/I_in = r_O2 (1 + g_m1 r_O1)        ≈ g_m1 r_O1 r_O2\nR_out,open = r_O1 + (1 + g_m1 r_O1) r_O2              ≈ g_m1 r_O1 r_O2\nFeedback factor:  K = I_F / V_out = g_m2\nLoop gain:        T = K·R_0 = g_m2 r_O2 (1 + g_m1 r_O1) ≈ (g_m1 r_O1)(g_m2 r_O2)\n```\n\n## 4. Closed-loop results\n\n```\nV_out/I_in = R_0/(1+T) = r_O2(1 + g_m1 r_O1) / [1 + g_m2 r_O2 (1 + g_m1 r_O1)]  ≈ 1/g_m2\nR_in       = r_O2/(1+T)                                                          ≈ 1/(g_m2 · g_m1 r_O1)\nR_out      = [r_O1 + (1 + g_m1 r_O1) r_O2]/(1+T)                                 ≈ 1/g_m2\n```\n\nThe approximations assume g_m r_O ≫ 1. With body effect, replace g_m1 by g_m1 + g_mb1.\n\n**Check by direct KCL:**\n\n- Output node (no signal current in M1): −g_m1 v_X + (v_out − v_X)/r_O1 = 0, so v_out = (1 + g_m1 r_O1) v_X.\n- Node X: I_in = g_m2 v_out + v_X/r_O2.\n\nCombining these gives exactly the expressions above. The gain is positive: V_out rises when I_in increases.\n\n## 5. Interpretation\n\n- **Intuition:** I1 fixes M1's current, so M2 must absorb all of I_in. V_out therefore moves by I_in/g_m2. M1 only amplifies the error voltage at X by (1 + g_m1 r_O1).\n- **Equivalent view:** M2 is effectively diode-connected through M1. The output looks like a diode-connected device (1/g_m2). The input resistance is that value divided by M1's intrinsic gain, and the dc level of X is set by V_b.\n- **λ = 0 limit:** T → ∞, V_out/I_in = 1/g_m2 exactly, R_in → 0, R_out = 1/g_m2.\n- **Large signal (λ = 0):** V_out = V_DD − |V_TH2| − √[2(I_B − I1 − I_in)/(μ_p C_ox (W/L)_2)], valid for I_in < I_B − I1. The gain 1/g_m2 varies with I_in, so the transimpedance is not very linear.\n- **Frequency response:** with capacitances C_X at X and C_out at the output (and r_O → ∞),\n\n```\nV_out/I_in ≈ (1/g_m2) / [1 + s·C_out/g_m2 + s²·C_X·C_out/(g_m1 g_m2)]\n```\n\n  The bandwidth is about g_m2/C_out. Avoiding peaking requires roughly g_m1/C_X ≥ 2 g_m2/C_out.",
        "format": "markdown",
        "sha256": "a1eb25ee3ec6f6a4c321f3f83e6d731642fd7bc9d1753881271942d872df7362"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate input path and the PMOS feedback device controlled by Vout, describes feedback to the input node, and gives the expected very low input resistance and approximately 1/gm2 transimpedance and output resistance. The additional analysis is consistent with the essential result.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2366,
        "output_tokens": 24752,
        "total_tokens": 27118,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22985,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2366,
        "output_tokens": 24752,
        "total_tokens": 27118,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22985,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Since no specific question came with the figure, here is a full low-frequency analysis, assuming ideal current sources and both transistors in saturation.\n\n**Result:** the circuit is a negative-feedback transimpedance amplifier with V_out/I_in ≈ 1/g_m2, a very low input resistance ≈ 1/(g_m1 g_m2 r_o1), and an output resistance ≈ 1/g_m2.\n\n## 1. What the circuit is\n\n- **M1 (NMOS)** is a common-gate stage: gate at V_b, source at the input node X, drain at V_out, loaded by the ideal current source I_1.\n- **M2 (PMOS)** has its source at V_DD, its gate sensing V_out, and its drain returning current to X.\n- I_in is injected into X; the unlabeled source is a bias sink, which I will call I_B.\n\nThe output voltage is sensed and a current is returned to the input, so this is voltage-current (shunt-shunt) feedback.\n\nThe feedback is negative: if V_X rises, V_out rises (common-gate is non-inverting), |V_GS2| falls, M2 delivers less current to X, and V_X falls.\n\n## 2. Bias point\n\n- I_D1 = I_1 and I_D2 = I_B − I_1, so I_B > I_1 is required.\n- V_X = V_b − V_GS1, which is fixed because I_1 fixes V_GS1.\n- V_out = V_DD − |V_GS2|.\n\n## 3. Small-signal analysis\n\n**Open loop, with loading.** Grounding M2's gate leaves r_o2 at node X; M2's gate does not load the output. Because I_1 is ideal, M1 carries no signal current, so all of I_in flows through r_o2:\n\n- V_X = I_in r_o2 and V_out = (1 + g_m1 r_o1) V_X\n- Open-loop transimpedance: R_0 = r_o2 (1 + g_m1 r_o1)\n- R_in,open = r_o2\n- R_out,open = r_o1 + r_o2 + g_m1 r_o1 r_o2\n\n**Feedback factor:** β = I_fb / V_out = g_m2\n\n**Loop gain:** T = g_m2 r_o2 (1 + g_m1 r_o1)\n\n**Closed loop:**\n\n| Quantity | Exact | Approximation (g_m r_o ≫ 1) |\n|---|---|---|\n| V_out / I_in | r_o2 (1 + g_m1 r_o1) / [1 + g_m2 r_o2 (1 + g_m1 r_o1)] | 1/g_m2 |\n| R_in | r_o2 / [1 + g_m2 r_o2 (1 + g_m1 r_o1)] | 1/(g_m1 g_m2 r_o1) |\n| R_out | (r_o1 + r_o2 + g_m1 r_o1 r_o2) / [1 + g_m2 r_o2 (1 + g_m1 r_o1)] | 1/g_m2 |\n\nThe gain is positive for I_in flowing into X. With body effect, replace g_m1 by g_m1 + g_mb1.\n\n**Check by direct KCL:**\n\n- At V_out: g_m1 V_X = (V_out − V_X)/r_o1, so V_out = (1 + g_m1 r_o1) V_X.\n- At X: I_in = g_m2 V_out + V_X / r_o2.\n\nCombining these gives the same expressions as the table.\n\n## 4. Intuition\n\nI_1 pins M1's current, so every bit of I_in must be absorbed by M2. Its gate voltage therefore moves by I_in/g_m2. M1 acts as a level-shifting feedback path that makes M2 behave like a diode-connected device, while holding X as a virtual ground.\n\nWith λ = 0 the results become exact: V_out/I_in = 1/g_m2, R_in = 0, R_out = 1/g_m2.\n\nThe large-signal characteristic (square-law devices) is\n\nV_out = V_DD − |V_TH2| − √[2(I_B − I_1 − I_in) / (μ_p C_ox (W/L)_2)]\n\n## 5. Frequency response\n\nWith capacitance C_X at the input node and C_Y at the output node:\n\nV_out/I_in ≈ (1/g_m2) / [1 + s C_Y/g_m2 + s² C_X C_Y/(g_m1 g_m2)]\n\nThe loop has a dominant pole at the output node and a second pole near g_m1/C_X. To avoid peaking you need roughly g_m1/C_X ≥ 2 g_m2/C_Y, so a large input capacitance (for example a photodiode) degrades stability.",
        "format": "markdown",
        "sha256": "85e3ffe177322643b3d74b8064f3be24bc845c4dcc73d2a902b748da92967063"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device, describes the feedback path to the input node, and gives the very low input resistance and 1/gm2 transimpedance and output resistance.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2366,
        "output_tokens": 16738,
        "total_tokens": 19104,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2366,
        "output_tokens": 16738,
        "total_tokens": 19104,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No – it still oscillates, just at a proportionally lower frequency.**\n\n**Small-signal argument.** Model each inverter as a one-pole stage:\n\nH(s) = −A₀ / (1 + s/ω₀), with A₀ = (g_mn + g_mp)(r_on ‖ r_op) and ω₀ = 1/(R_out·C_L).\n\nThe three inversions give 180° of phase shift at DC, so the loop oscillates at the frequency where the three poles add another 180°, i.e. 60° per stage:\n\ntan⁻¹(ω_osc/ω₀) = 60°, so ω_osc = √3·ω₀ = √3/(R_out·C_L).\n\nAt that frequency each stage's gain is A₀/√(1+3) = A₀/2, so the start-up condition is A₀ ≥ 2.\n\nC_L appears only in ω₀, not in A₀. Making the capacitors larger moves the poles to lower frequencies, but the loop still reaches the required phase shift at some (lower) frequency, and the gain there is still A₀/2. The start-up condition is unaffected.\n\n**Large-signal argument.** The node equations have the form C_L·dV_j/dt = I(V_{j−1}, V_j). Multiplying C_L by a factor k is the same as stretching the time axis by k. The waveforms keep the same shape and swing, and the period, about 6·t_d with t_d ∝ C_L, grows by k.\n\nSo with arbitrarily large (but finite) capacitors, the frequency becomes arbitrarily low but the oscillation does not stop. This assumes ideal capacitors; in a real circuit, effects such as leakage could matter at extremely low frequencies.",
        "format": "markdown",
        "sha256": "e66dd7f080dc8a08f7685b58be5c070e5c86b71617ff8b762e748f7b4b39dd7f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency, with both valid small-signal phase/gain reasoning and a time-scaling delay argument. The oscillation condition is independent of the three equal load capacitances.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2400,
        "output_tokens": 1933,
        "total_tokens": 4333,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1366,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2400,
        "output_tokens": 1933,
        "total_tokens": 4333,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1366,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No – it still oscillates, just at a proportionally lower frequency.**\n\n**Small-signal view.** Model each inverter as a one-pole stage with low-frequency gain A₀ = (g_mn + g_mp)(r_on‖r_op) and pole ω₀ = 1/(R_out·C_L):\n\nH(s) = −A₀ / (1 + s/ω₀)\n\nThe loop gain is H³(s). The three inversions already give 180° at DC, so oscillation occurs where each stage adds another 60° of phase shift:\n\ntan⁻¹(ω_osc/ω₀) = 60° → ω_osc = √3·ω₀ = √3 /(R_out·C_L)\n\nAt that frequency each stage's gain magnitude is A₀/√(1+3) = A₀/2, so the start-up condition is\n\n(A₀/2)³ ≥ 1 → A₀ ≥ 2\n\nC_L does not appear in this condition. Increasing all three capacitors lowers ω₀, and ω_osc moves down with it, so the loop gain at the 180° frequency stays at A₀³/8. If the ring oscillated with small capacitors, it oscillates with arbitrarily large ones.\n\n**Large-signal view.** The period is about 6·T_D, and each gate delay T_D is proportional to C_L. Larger capacitors make each node charge and discharge more slowly, but each inverter still eventually trips the next one, and the odd number of inversions leaves no stable DC state.\n\n**Caveat.** This relies on all three capacitors growing together. If only one were made very large, it would create a dominant pole (as in op-amp compensation), the loop gain could fall below unity before the phase reached 180°, and the oscillation could die out.",
        "format": "markdown",
        "sha256": "090d4bde7373f39c52304de82027597b19d5fcfe2fdb645bd718af3bc13667ed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors can grow without stopping oscillation, with frequency decreasing proportionally to 1/C_L. The small-signal phase and gain analysis supports the conclusion, and the single-node loading caveat is consistent with the solution.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2400,
        "output_tokens": 1974,
        "total_tokens": 4374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1400,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2400,
        "output_tokens": 1974,
        "total_tokens": 4374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1400,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No.** Making all three capacitors larger only slows the oscillation down; it does not stop it.\n\n**Small-signal view.** Model each inverter as a stage with gain −A₀/(1 + s/ω₀), where A₀ = g_m·R_out and ω₀ = 1/(R_out·C_L). The loop gain is\n\nH(s) = −A₀³ / (1 + s/ω₀)³\n\n- **Phase condition:** the three inversions give 180°, so each stage must add 60° of lag. This happens at tan⁻¹(ω/ω₀) = 60°, giving ω_osc = √3·ω₀ = √3/(R_out·C_L).\n- **Gain condition:** at that frequency each stage's gain is A₀/√(1+3) = A₀/2, so startup requires A₀ ≥ 2.\n\nThe startup condition does not contain C_L. Because the three poles are identical and move together, there is always a frequency where each stage gives 60° of lag, and the gain there is always A₀/2. The closed-loop poles are\n\ns = ω₀[(A₀/2 − 1) ± j(√3/2)A₀]\n\nThese stay in the right half-plane for A₀ > 2 and simply slide toward the origin as C_L grows.\n\n**Large-signal view.** With an odd number of inversions there is no stable DC state to latch into. Each stage delay is proportional to C_L, and the period is about 6·t_d, so the period just gets longer.\n\n**Caveats.** For any finite C_L the circuit oscillates, with frequency proportional to 1/C_L and a correspondingly slower startup. Only in the literal limit C_L → ∞ does the frequency go to zero. This differs from enlarging just one capacitor, which creates a dominant pole (as in op-amp compensation) and can kill the oscillation.",
        "format": "markdown",
        "sha256": "efa6591242563b2bdc00e14e30742b612bb4ab0c1d14ddb3c82caa8128be5201"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal loading on all three nodes lowers the frequency without eliminating oscillation. The small-signal analysis correctly shows the oscillation condition is independent of capacitance, with frequency scaling as 1/C_L.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2400,
        "output_tokens": 2454,
        "total_tokens": 4854,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1850,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2400,
        "output_tokens": 2454,
        "total_tokens": 4854,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1850,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise at a given offset frequency drops by about 6 dB (a factor of 4), but only because the oscillation frequency is halved.**\n\nThis is the standard first-order analysis for an inverter ring like the one in the figure:\n\n- **Frequency:** Each stage's delay is proportional to C_L (t_d ≈ C_L·V_DD / 2I_D), so f₀ = 1/(2N·t_d) is halved when the capacitors are doubled.\n\n- **Phase noise:** In the white-noise regime, the phase noise of an inverter-based ring is approximately\n\n  S_φ(Δf) ≈ (f₀/Δf)² · (2kT/I_D) · [(γ_N + γ_P)/(V_DD − V_TH) + 1/V_DD]\n\n  The transistors are unchanged, so I_D and the bracketed term do not depend on C_L. Only f₀² changes, and it falls by a factor of 4, giving −6 dB at a given offset. The flicker-noise (1/f³) region also scales with f₀², so it drops by the same amount.\n\n- **Jitter view:** Doubling C_L halves the kT/C voltage noise power but also halves the slew rate, so the timing jitter variance per transition doubles. The period also doubles, and since S_φ ∝ f₀³·σ_T²/Δf², the net change is (1/8)·2 = 1/4.\n\n- **Power:** P ≈ N·f₀·C_L·V_DD² is unchanged, because C_L doubles while f₀ halves.\n\nSo there is no real improvement in the oscillator's quality. The phase noise normalised to the carrier, i.e. the figure of merit L·P·(Δf/f₀)², stays the same. To get lower phase noise at the same frequency, you would have to scale up both the transistor widths and the capacitors, which costs 2× the power for each 3 dB.",
        "format": "markdown",
        "sha256": "5374dffd9554c7570b5f69daafdf514c3dc9284bc4e184f3b769b081a54aaba0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states a 6 dB (factor-of-four) phase-noise reduction at fixed offset and supports it by the halved oscillation frequency. The added fixed-relative-offset observation is consistent with the solution.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2392,
        "output_tokens": 5133,
        "total_tokens": 7525,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2392,
        "output_tokens": 5133,
        "total_tokens": 7525,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** the oscillation frequency halves, and the phase noise at a given offset frequency drops by a factor of 4 (about 6 dB). Relative to the carrier, though, nothing is gained.\n\nThis assumes the three C_L's dominate the node capacitances and the inverters are unchanged.\n\n**Why**\n\n- **Frequency:** each stage delay is proportional to C_L·V_DD/I_D, so f₀ = 1/(2N·t_d) is proportional to 1/C_L. Doubling C_L halves f₀.\n\n- **Phase noise:** for an inverter ring in the white-noise region (Abidi's expression),\n\n  S_φ(Δf) ≈ (f₀/Δf)² · (2kT/I_D) · [(γ_N + γ_P)/(V_DD − V_TH) + 1/V_DD]\n\n  The transistor currents and noise are unchanged, so only the f₀² factor changes. Halving f₀ gives one quarter of the phase noise, or −6 dB at the same Δf. The flicker-noise region (proportional to f₀²/Δf³) scales the same way.\n\n- **Jitter view:** the edges are slower, so the period jitter variance doubles (rms jitter rises by √2). But the period also doubles, and since S_φ is proportional to f₀³·σ_T²/Δf², the net result is (1/8)·2 = 1/4.\n\n- **Power:** P ≈ N·C_L·V_DD²·f₀ is unchanged, because C_L doubles while f₀ halves.\n\n**Interpretation**\n\nThe 6 dB reduction is exactly what you would get by following the original oscillator with an ideal ÷2 stage. The phase noise normalized to the carrier, and hence the figure of merit, is the same as before.\n\nTo genuinely lower the phase noise at a given frequency, you have to spend power. Scaling the transistor widths and the capacitors together keeps f₀ fixed and gives about 3 dB of improvement for each doubling of power.",
        "format": "markdown",
        "sha256": "7cc5f252a45474327bbc5d9d8aff2edfe629825ffade80471bbefaaef9b88577"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about a factor of four (6 dB) at a fixed offset, with the appropriate frequency-squared justification. The unchanged result at fixed relative offset is also consistent with the golden solution.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2392,
        "output_tokens": 6475,
        "total_tokens": 8867,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2392,
        "output_tokens": 6475,
        "total_tokens": 8867,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** the phase noise at a given offset frequency falls by about 6 dB (a factor of 4), but only because the oscillation frequency is halved. This is my own derivation from the standard ring-oscillator phase-noise result, assuming C_L dominates the node capacitance and the inverters are unchanged.\n\n**Why:**\n\n- **Frequency:** f₀ ≈ I_D /(N·C_L·V_DD), so doubling C_L halves f₀.\n\n- **Power:** P ≈ N·f₀·C_L·V_DD². Since the product f₀·C_L is unchanged, the power stays the same.\n\n- **Phase noise:** for an inverter ring, the white-noise-induced phase noise is approximately\n\n  S_φ(f) ≈ (f₀/f)² · (2kT/I_D) · [γ-terms/(V_DD − V_TH) + 1/V_DD]\n\n  C_L appears only through f₀. With f₀ halved, S_φ drops by a factor of 4. The flicker-noise (1/f³) region also scales as f₀², so it drops by 6 dB as well.\n\n**Intuition:** with twice the capacitance, each edge is twice as slow. The jitter variance accumulated per period doubles, but the period doubles too, so the ratio σ_T²/T is unchanged. Because S_φ = (σ_T²/T)·f₀²/f², the only change comes from the f₀² factor.\n\n**What this means:** the 6 dB is not a real improvement. It is the same result you would get by following the original oscillator with an ideal ÷2. The figure of merit (phase noise normalized to f₀ and power) is unchanged, and so is the absolute jitter in seconds accumulated over a given time.\n\nTo get back to the original frequency you would have to double the inverter widths, which doubles the current and power. That would give a net improvement of only 3 dB, the usual phase-noise/power trade-off.",
        "format": "markdown",
        "sha256": "a61155d49c97e15c5eb6fbe030d575657ca3ec920870664d43496c50f5078ec7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a factor-of-four (about 6 dB) phase-noise reduction at a fixed offset and supports it by noting that doubling the capacitance halves the oscillation frequency.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2392,
        "output_tokens": 6301,
        "total_tokens": 8693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5663,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2392,
        "output_tokens": 6301,
        "total_tokens": 8693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5663,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** For any finite inverter gain, a large enough C_L stops the oscillation, because it creates a dominant pole that stabilizes the loop, just as dominant-pole compensation stabilizes a three-stage op amp in unity-gain feedback.\n\n**Small-signal analysis**\n\nModel each inverter as a stage with gain −A₀ and output resistance R, with capacitance C at each unloaded node. The loop transmission is\n\nH(s) = −A₀³ / [(1 + s/ω₁)(1 + s/ω₀)²],\n\nwhere ω₀ = 1/(RC) and ω₁ = 1/[R(C + C_L)].\n\n- **Phase condition:** The frequency-dependent phase shift reaches 180° at ω_osc = ω₀·√(1 + 2ω₁/ω₀). As C_L → ∞, the loaded node contributes about 90° and the other two stages 45° each, so ω_osc → ω₀. The phase condition can therefore always be met.\n\n- **Gain condition:** Requiring |H(jω_osc)| ≥ 1 gives\n\n  A₀³ ≥ 4 + 2(ω₀/ω₁ + ω₁/ω₀).\n\n  For C_L = 0 this reduces to the familiar A₀ ≥ 2. For large C_L it becomes A₀³ ≳ 2ω₀/ω₁ ≈ 2C_L/C.\n\nSince the required gain grows in proportion to C_L, the condition is eventually violated. Once C_L exceeds roughly A₀³C/2, the loop gain is below unity at the frequency where the phase shift is 180°, and the loop is stable.\n\n**Intuition**\n\nWith a huge C_L, the loaded node moves very slowly, and the other two inverters simply track it. The loop then behaves as a single-pole negative-feedback system. Any disturbance decays, and all three nodes settle at the inverter trip point, where the inverters draw static current.\n\n**Caveats**\n\n- For a moderately large C_L the circuit still oscillates, only more slowly and with a smaller swing at the loaded node.\n- With a stage gain of about 10, C_L must be hundreds of times C before oscillation stops.\n- Only with infinite stage gain (ideal integrators) would the ring oscillate for every value of C_L.",
        "format": "markdown",
        "sha256": "e0cec1bda5c2058b28a9fa20416e75c7b9e1cb8b4782029c4f7e8bbba507c06f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large C_L stops oscillation for finite gain, and explains the dominant-pole gain roll-off and resulting failure of the Barkhausen condition. Its time-domain explanation and approximate threshold are consistent with the golden solution.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2292,
        "output_tokens": 15686,
        "total_tokens": 17978,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14915,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2292,
        "output_tokens": 15686,
        "total_tokens": 17978,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14915,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes. Once C_L is large enough, the ring stops oscillating, because the heavily loaded node becomes a dominant pole that \"compensates\" the loop, just as in an op amp.** A moderately large C_L does not stop it; only a C_L beyond a limit set by the inverter gain does.\n\n**Small-signal analysis**\n\nModel each inverter as a stage with low-frequency gain −A₀ (A₀ = g_m·R_out) and one pole. Two nodes have the pole ω₀ = 1/(R_out·C), and the loaded node has ω_p1 = 1/[R_out(C + C_L)]. The loop transmission is\n\nH(s) = −A₀³ / [(1 + s/ω_p1)(1 + s/ω₀)²]\n\nFor oscillation, the three poles must supply 180° of phase shift at a frequency where |H| ≥ 1.\n\n- **Phase condition:** tan⁻¹(ω/ω_p1) + 2·tan⁻¹(ω/ω₀) = 180°, which gives ω_osc² = ω₀² + 2ω₀ω_p1. As C_L grows, the loaded stage contributes about 90° and the other two about 45° each, so ω_osc approaches ω₀. The frequency does not keep falling with C_L.\n\n- **Gain condition:** requiring |H(jω_osc)| ≥ 1 gives\n\n  A₀³ ≥ 4 + 2(ω₀/ω_p1 + ω_p1/ω₀)\n\n  For C_L = 0 this reduces to the familiar A₀ ≥ 2. For large C_L it becomes A₀³ ≳ 2C_L/C.\n\nBecause an inverter's gain at its trip point is finite, the gain condition cannot be met once C_L exceeds roughly A₀³C/2. For example, with A₀ = 10 the limit is about 500C. Beyond that, the loop gain falls to unity well below ω₀, the phase margin is positive (approaching 90°), and the circuit settles with every node at the inverter trip point.\n\n**Time-domain intuition**\n\nWith a huge C_L, the loaded node does not swing rail to rail more slowly. As soon as it crosses the trip point, the two fast inverters flip and reverse the charging current. The node therefore shows only a small triangular ripple around the trip point, with amplitude proportional to 1/C_L. When that ripple is too small for the other two stages to amplify back to a full swing (loop gain below 1), the oscillation dies out.",
        "format": "markdown",
        "sha256": "90c45749334339ebcee804e804ebdc9af7b5e831796520602ea8c9efd5afd393"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large load capacitance stops oscillation and explains the dominant-pole gain/phase roll-off and failure of the Barkhausen condition. Its small-signal and time-domain details are consistent with the essential answer.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2292,
        "output_tokens": 11683,
        "total_tokens": 13975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10846,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2292,
        "output_tokens": 11683,
        "total_tokens": 13975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10846,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** With real inverters (finite gain), a large enough C_L stops the oscillation, and the loop simply settles at the inverters' trip point.\n\n**Why**\n\nModel each inverter near its trip point as a one-pole stage, −A₀/(1 + s/ω_p). Let C₀ be the normal capacitance at each node and R_out the inverter output resistance.\n\n- The loaded node has a pole at ω₁ = 1/[R_out(C₀ + C_L)].\n- The other two nodes have poles at ω₀ = 1/(R_out·C₀).\n\nThe loop transmission is\n\nH(s) = −A₀³ / [(1 + s/ω₁)(1 + s/ω₀)²]\n\nSetting 1 − H(jω) = 0 gives two conditions:\n\n- **Frequency where the phase shift reaches 180°:** ω_osc = ω₀·√(1 + 2ω₁/ω₀)\n- **Gain needed for startup:** A₀³ ≥ 4 + 2(ω₀/ω₁ + ω₁/ω₀)\n\nAs a check, equal stages (ω₁ = ω₀) give A₀³ ≥ 8, i.e. A₀ ≥ 2, the standard three-stage result.\n\n**What happens as C_L grows**\n\n- ω₁ → 0, so the loaded stage contributes nearly 90° of phase shift. The other two stages must then supply about 45° each, so the candidate oscillation frequency approaches ω₀ rather than falling to zero.\n- At that frequency the loaded stage attenuates heavily. The loop gain there is about A₀³·ω₁/(2ω₀), so the startup requirement becomes A₀³ ≳ 2ω₀/ω₁ ≈ 2C_L/C₀, which grows without bound.\n\nFor any finite A₀, oscillation therefore stops once C_L exceeds roughly (A₀³/2)·C₀. For example, with A₀ = 10 this is about 500 C₀.\n\n**Intuition**\n\nThis is dominant-pole compensation. The circuit is a three-stage amplifier in unity-gain negative feedback, and a large C_L makes the loop gain fall below unity before the phase shift reaches 180°. The loop then has positive phase margin and is stable. A large-signal limit cycle does not rescue it, because the inverters' gain only drops as they saturate.\n\n**Caveat**\n\nOnly idealized inverters with infinite gain would keep oscillating for any C_L, at about ω₀ with a vanishingly small swing on the loaded node.",
        "format": "markdown",
        "sha256": "c6562d088f56676cd296c047e20c25fcc5dd90dbe40cc2a03c19ac0fe1f2822e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large CL stops oscillation and explains that the added pole attenuates the loop at the phase-crossover frequency until the Barkhausen gain condition fails. The additional one-pole analysis is consistent with the stated model.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2292,
        "output_tokens": 9323,
        "total_tokens": 11615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8469,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2292,
        "output_tokens": 9323,
        "total_tokens": 11615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8469,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise falls by a factor of 2 (3 dB), the oscillation frequency stays the same, and the power consumption doubles.**\n\nThis assumes each node's capacitance is dominated by the transistors themselves, with no significant fixed load.\n\n**Why the frequency doesn't change**\n\n- Doubling W doubles each transistor's drain current.\n- It also doubles the gate and junction capacitances at every node.\n- The stage delay is proportional to C·V_DD / I_D, so it is unchanged, and so is f₀.\n\n**Why the phase noise drops by 3 dB**\n\n- *White (thermal) noise, 1/f² region:* the ring oscillator's phase noise has the form (as I recall it from Abidi's analysis)\n\n  S_φ(f) ≈ (f₀²/f²) · (2kT/I_D) · [γ-dependent term/(V_DD − V_TH) + 1/V_DD]\n\n  It is inversely proportional to I_D. Since I_D doubles and the voltages are unchanged, S_φ is halved.\n\n- *Flicker noise, 1/f³ region:* the gate-referred flicker noise is proportional to 1/(WL·C_ox). Doubling W halves it, so this part of the phase noise also drops by 3 dB.\n\n**Intuition**\n\nDoubling the widths is the same as placing two identical ring oscillators in parallel with their corresponding nodes shorted. The signal currents add directly, so the current doubles and its square quadruples. The noise currents are uncorrelated, so only their power doubles. The timing jitter variance, which goes as noise/signal², is therefore halved.\n\nThis is the linear scaling trade-off in oscillators: each doubling of power (and area) at a fixed frequency buys a 3 dB reduction in phase noise.",
        "format": "markdown",
        "sha256": "bcc234864223eb17512f07dfd311c8eb48506a85c39163dbd8be3cbab397e7be"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and supports it with the valid parallel-ring scaling argument. The frequency and power trends are also consistent with transistor-dominated node capacitance.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3617,
        "output_tokens": 2524,
        "total_tokens": 6141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3617,
        "output_tokens": 2524,
        "total_tokens": 6141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise drops by a factor of 2 (3 dB) at all offset frequencies, the oscillation frequency stays essentially the same, and the power consumption doubles.**\n\nThe circuit is a three-stage CMOS inverter ring oscillator. Doubling every transistor's width is equivalent to placing two identical ring oscillators in parallel (linear scaling):\n\n- **Frequency:** Each stage's drive current doubles, but so does the capacitance at each node (assuming the devices' own capacitances dominate the load). The stage delay, and therefore f₀, is unchanged.\n\n- **Thermal (white) noise region, 1/f²:** The noise current spectral density (4kTγgₘ) doubles, but the drive current and node capacitance also double. The timing jitter variance per transition scales as (noise current density)/(I_D)² ∝ W/W² = 1/W. Equivalently, the phase noise is proportional to kT/I_D, so doubling I_D halves it.\n\n- **Flicker noise region, 1/f³:** The gate-referred flicker noise density, K/(WLC_ox f), is inversely proportional to the gate area. Doubling W halves it, so this contribution also falls by 3 dB.\n\nOne caveat: if a fixed external capacitance (wiring or a buffer) loads the nodes, the frequency rises slightly rather than staying exactly constant.\n\nThis is the usual power–phase-noise trade-off: each 3 dB improvement in phase noise costs a doubling of power (and area).",
        "format": "markdown",
        "sha256": "a60f23e2d503b202c07055d33cbc26c9431c68a2301655345fb7c124435a7d67"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the 3 dB phase-noise reduction, unchanged intrinsic oscillation frequency, and doubled power; its width-scaling explanation is consistent with the golden solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3617,
        "output_tokens": 2476,
        "total_tokens": 6093,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3617,
        "output_tokens": 2476,
        "total_tokens": 6093,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise drops by about 3 dB (a factor of 2), the oscillation frequency stays roughly the same, and the power consumption doubles.**\n\nThe circuit is a three-stage CMOS inverter ring oscillator. The reasoning is as follows:\n\n- **Frequency:** Doubling every W doubles each stage's drive current and also doubles the capacitance at each node, since the load is mainly the transistors' own gate and junction capacitances. The delay per stage, about C·V_DD/I, is unchanged, so f₀ is unchanged.\n\n- **Thermal (white) noise region:** The phase noise has the form S_φ(f) ∝ (f₀/f)²·(kT/I_D)·(…), so it is inversely proportional to the drain current. Doubling I_D at the same f₀ halves the phase noise.\n\n- **Flicker noise region:** The gate-referred 1/f noise of each device is K/(W·L·C_ox·f), which is inversely proportional to W, while g_m/I_D is unchanged. The flicker-induced phase noise is therefore also halved.\n\nAn intuitive check: doubling the widths is equivalent to placing two identical ring oscillators in parallel with their corresponding nodes shorted. The signal amplitudes add coherently while the uncorrelated noise adds in power, giving a 3-dB improvement.\n\nThis is the usual linear scaling trade-off: each doubling of power and device size buys 3 dB of phase noise at the same frequency.\n\nOne caveat: if a fixed load capacitance (wiring or a buffer) dominates instead of the transistor capacitances, f₀ rises when the widths are doubled and the result above no longer holds exactly.",
        "format": "markdown",
        "sha256": "a60a4e189fa9e9a5996f7d77dc1ff73911d9cd6cb3aed38782ce779cb8c9fa49"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives about a 3 dB phase-noise reduction and supports it with the parallel-rings argument. The frequency and power scaling are also consistent with the figure’s device-dominated node capacitances.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3617,
        "output_tokens": 2282,
        "total_tokens": 5899,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3617,
        "output_tokens": 2282,
        "total_tokens": 5899,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** $R_X \\approx \\dfrac{1}{3}\\left(\\dfrac{1}{g_{mN}}+\\dfrac{1}{g_{mP}}\\right)$\n\n**Setup.** Bias the ring at its equilibrium point, where every node sits at the inverter trip point and all transistors are in saturation. Apply a small test voltage $v_X$ to the supply node and find the current drawn.\n\n**Symmetry.** The three inverters are identical and connected in a loop, so the three internal nodes all change by the same amount $v$. Each inverter therefore has equal input and output small-signal voltages. It behaves as if its input and output were shorted: a diode-connected PMOS in series with a diode-connected NMOS between the supply and ground.\n\n**One inverter.** KCL at the output node (input = output = $v$):\n\n$$(g_{mN}+g_{oN})\\,v=(g_{mP}+g_{oP})\\,(v_X-v)$$\n\nso\n\n$$v_X - v = v_X\\,\\frac{g_{mN}+g_{oN}}{g_{mN}+g_{oN}+g_{mP}+g_{oP}}$$\n\nThe current drawn from the supply is\n\n$$i=(g_{mP}+g_{oP})(v_X-v)$$\n\nwhich gives\n\n$$\\frac{v_X}{i}=\\frac{1}{g_{mN}+g_{oN}}+\\frac{1}{g_{mP}+g_{oP}}=\\left(\\frac{1}{g_{mN}}\\Big\\|\\,r_{ON}\\right)+\\left(\\frac{1}{g_{mP}}\\Big\\|\\,r_{OP}\\right)$$\n\n**Three inverters in parallel.**\n\n$$R_X=\\frac{1}{3}\\left[\\left(\\frac{1}{g_{mN}}\\Big\\|\\,r_{ON}\\right)+\\left(\\frac{1}{g_{mP}}\\Big\\|\\,r_{OP}\\right)\\right]\\approx\\frac{1}{3}\\left(\\frac{1}{g_{mN}}+\\frac{1}{g_{mP}}\\right)$$\n\nThe approximation holds when $r_O \\gg 1/g_m$. The supply node is therefore a low-impedance node, equivalent to three stacks of diode-connected devices in parallel.",
        "format": "markdown",
        "sha256": "ca6ab407f7a7606e92012f9ee27ecd95d11dfe858ac0ca23925dbb83f20dc142"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static diode-connected gm-based derivation is internally consistent, but it ignores the oscillation-driven charging and discharging of the load capacitances that sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3448,
        "output_tokens": 3203,
        "total_tokens": 6651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2434,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3448,
        "output_tokens": 3203,
        "total_tokens": 6651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2434,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** R_X ≈ (1/3)·(1/g_mN + 1/g_mP), assuming each inverter is a CMOS pair biased at the ring's equilibrium (trip) point with all transistors in saturation.\n\n**Derivation**\n\n1. Apply a small test voltage v_x at the supply node. For each inverter with input v_in and output v_out, KCL at the output gives\n\n   g_mN·v_in + v_out/r_ON + g_mP·(v_in − v_x) + (v_out − v_x)/r_OP = 0.\n\n2. The three stages are identical and connected in a loop, so the only solution of these three equations is v_1 = v_2 = v_3 = v. Each inverter therefore has its input and output moving together, which means both of its transistors behave as diode-connected devices.\n\n3. Each inverter then looks like a diode-connected PMOS in series with a diode-connected NMOS between the supply node and ground:\n\n   R_inv = (1/g_mP ∥ r_OP) + (1/g_mN ∥ r_ON) ≈ 1/g_mP + 1/g_mN.\n\n4. The three inverters are in parallel at the supply node:\n\n   **R_X = (1/3)·[(1/g_mN ∥ r_ON) + (1/g_mP ∥ r_OP)] ≈ (1/3)·(1/g_mN + 1/g_mP)**\n\nFor N stages the factor 1/3 becomes 1/N. When the ring is actually oscillating, the transconductances vary with time, so this value is an estimate of the resistance seen at the supply node.",
        "format": "markdown",
        "sha256": "e4d50997794c0c6798e4d9f89374c8af0d6106900db7ec4d4c58b69810345553"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance and treats it as an estimate, but misses the dominant oscillation-driven charging and discharging of the load capacitances that sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3448,
        "output_tokens": 3507,
        "total_tokens": 6955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2980,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3448,
        "output_tokens": 3507,
        "total_tokens": 6955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2980,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** R_X ≈ (1/3)(1/g_mN + 1/g_mP), neglecting channel-length modulation.\n\n**Reasoning**\n\n1. For a small-signal analysis, linearize the ring about its equilibrium point. With three identical inverters in a loop, every node sits at the inverter trip point, so each inverter has V_in = V_out.\n\n2. Apply a small change v_X to the supply. For inverter j (input v_{j-1}, output v_j), KCL at the output gives\n\n (g_mP + 1/r_OP)(v_X − v_j) + g_mP(v_j − v_{j-1}) = (g_mN + 1/r_ON)v_j + g_mN(v_{j-1} − v_j)\n\n Solving the three equations around the loop gives one solution, with all nodes moving equally:\n\n v_1 = v_2 = v_3 = v_X (g_mP + 1/r_OP) / (g_mN + g_mP + 1/r_ON + 1/r_OP)\n\n3. Since each inverter's input and output remain equal, each stage behaves as a diode-connected PMOS in series with a diode-connected NMOS between the supply and ground. The resistance of one stage is\n\n (1/g_mP ‖ r_OP) + (1/g_mN ‖ r_ON) ≈ 1/g_mP + 1/g_mN\n\n4. The three stages are in parallel at the supply node:\n\n **R_X = (1/3)[(1/g_mN ‖ r_ON) + (1/g_mP ‖ r_OP)] ≈ (1/3)(1/g_mN + 1/g_mP)**\n\nFor an N-stage ring the factor 1/3 becomes 1/N.\n\nThis value holds at the trip-point bias. Once the ring oscillates with large swings, the transconductances vary with time, so the effective resistance differs somewhat from this value.",
        "format": "markdown",
        "sha256": "da6d33d537536c209e2381f1299bff3204996a42fe4ca3c6e97a8631e759be6e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance at the trip point, but misses the dominant oscillation-driven charging and discharging of the load capacitances that sets the supply resistance. The golden solution explicitly assigns this static-only approach a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3448,
        "output_tokens": 4188,
        "total_tokens": 7636,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3448,
        "output_tokens": 4188,
        "total_tokens": 7636,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, it changes.** The expression is correct only while the ring sits at its DC equilibrium (the trip point), not once it oscillates.\n\n**Why the formula holds without oscillation**\n\nAt the trip point, all three nodes sit at the same voltage, so each inverter has V_in = V_out. Both transistors are then in saturation and act as diode-connected devices. A small change in the supply moves all three nodes equally, so the ring looks like three (1/gmn + 1/gmp) branches in parallel, giving RX ≈ (1/3)(1/gmn + 1/gmp).\n\n**Why it fails with oscillation**\n\n- The nodes swing nearly rail-to-rail with staggered phases, so no inverter has V_in = V_out. The diode-connected picture no longer applies.\n- Each transistor turns off for part of the period and passes through saturation and triode in the rest. While a PMOS charges its output node, the NMOS in the same inverter is essentially off.\n- The transconductances therefore vary strongly with time, and so does the resistance seen at the supply node. It varies periodically (at 3·f_osc for three stages), and only its average value is meaningful. That average is not set by the trip-point gmn and gmp.\n\n**What RX becomes**\n\nThe average must come from the large-signal behaviour. The oscillating ring draws charge packets from the supply, much like a switched-capacitor resistor. With load capacitance C_L per node and rail-to-rail swings (neglecting crowbar current):\n\nI_avg ≈ 3·C_L·V_DD·f_osc\n\nThe incremental resistance for slow supply perturbations is then\n\nRX = (∂I_avg/∂V_DD)⁻¹ = 1 / [3·C_L·(f_osc + V_DD·∂f_osc/∂V_DD)]\n\nThis is V_DD/I_avg reduced by the supply sensitivity of the oscillation frequency. For square-law devices it works out to roughly (V_DD − V_TH)/(2·I_avg). In general this differs from the trip-point value.\n\nIn practice, you would find RX by simulation: change the supply voltage (or injected supply current) slightly and measure the change in the average current (or average supply-node voltage).",
        "format": "markdown",
        "sha256": "c9c5399c8275577c681833426e7b9d421334ca65b3d9f2f6ecd077836c6f4a62"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the capacitive charging mechanism and derives the average-current and incremental-resistance expressions. However, it does not establish the key conclusion that RX remains on the order of the MOS on-resistance or 1/gm, rather than becoming much higher; its square-law estimate does not clearly make that comparison.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 10903,
        "total_tokens": 14465,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 10903,
        "total_tokens": 14465,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes.** The expression is only valid if the ring is not oscillating and sits at its equilibrium (trip) point.\n\n**Why it holds without oscillation.** At equilibrium, all three nodes sit at the trip point and every transistor is in saturation. By symmetry, the three nodes move together when the supply moves, so each inverter has V_in = V_out. Each stage then looks like a diode-connected PMOS in series with a diode-connected NMOS, giving 1/gmn + 1/gmp per stage and one third of that for three stages in parallel.\n\n**Why it fails with oscillation.**\n- The swings are large (nearly rail-to-rail), so there is no fixed bias point. Each transistor cycles through cutoff, saturation and triode, and gmn and gmp vary periodically between zero and their peak values. The trip-point transconductances no longer describe the circuit.\n- An inverter's input and output are no longer equal; the output is an inverted, delayed copy of the input. A stage that has settled has one device off and draws no supply current. Only a stage whose output is rising draws current, and its PMOS acts as a gate-driven switch charging the load capacitance, not as a diode.\n- The resistance seen at the supply node therefore varies periodically with time, and only an average value is meaningful.\n\n**What replaces it.** Each of the three node capacitances C_L is charged from the supply to V_DD once per period, so, neglecting crowbar current,\n\n```text\nI_avg ≈ 3 f0 C_L V_DD\n```\n\nThis gives two useful resistances:\n\n- **Large-signal (average):** V_DD / I_avg ≈ 1/(3 f0 C_L), like a switched-capacitor resistor.\n- **Small-signal (incremental), for supply changes slow compared with f0:**\n\n```text\nRX = (∂I_avg/∂V_DD)^-1 = 1 / { 3 C_L [ f0 + V_DD (∂f0/∂V_DD) ] }\n```\n\nBecause f0 rises with V_DD, this is smaller than 1/(3 f0 C_L). For square-law devices, I_avg ∝ (V_DD − V_TH)², so RX ≈ (V_DD − V_TH)/(2 I_avg).\n\nThese are estimates that assume rail-to-rail swings. The main point is that under oscillation RX is set by f0, C_L and the supply sensitivity of the frequency, not by (1/3)(1/gmn + 1/gmp).",
        "format": "markdown",
        "sha256": "70807b71d4bbfaa7a8a04b08bc22d0f0048bcdbf6f6c3e878b0c39d5c3865d53"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies capacitor charging as the oscillating supply-current mechanism, gives the average and slow-supply incremental resistance forms, and its square-law result is on an inverse-transconductance scale rather than implying a much larger resistance. The rail-swing and negligible-crowbar assumptions are acceptable approximations.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 13602,
        "total_tokens": 17164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12777,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 13602,
        "total_tokens": 17164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12777,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes.** The expression is correct only while the ring sits at its equilibrium point; once it oscillates, it no longer describes the circuit.\n\n**Why it holds at equilibrium**\n\nWith all three nodes at the trip point, every transistor is in saturation with a fixed gm. A small change in the supply moves all three nodes by the same amount, so each inverter's input and output move together. Each device then has v_gs = v_ds and acts as if diode-connected. That gives 1/gmn + 1/gmp per stage and three stages in parallel, which is the stated result (neglecting channel-length modulation).\n\n**What changes when it oscillates**\n\n- **No fixed bias point.** The swings are large, nearly rail-to-rail. Each transistor cycles through off, saturation and deep triode every period, so gmn and gmp vary between zero and their maximum. There is no single gm to put in the formula.\n- **The stages are not in parallel.** They are 120° apart, so they are never all at the trip point together. They draw supply current one after another, and the factor 1/3 loses its meaning.\n- **RX is time-varying.** A settled stage has one device off and presents almost an open circuit to the supply. A stage in mid-transition presents a low resistance. So RX varies periodically, and only an average value is meaningful.\n\n**What replaces it**\n\nFor slow supply perturbations, the useful definition is the change in supply voltage divided by the change in average supply current. Neglecting crowbar current, with C_L the capacitance at each node and f0 the oscillation frequency:\n\nI_DD,avg ≈ 3 f0 C_L V_DD\n\nRX = (∂I_DD,avg/∂V_DD)⁻¹ ≈ 1 / [3 C_L (f0 + V_DD ∂f0/∂V_DD)]\n\nSince f0 = 1/(6 T_D), where T_D is the stage delay, I_DD,avg ≈ C_L V_DD/(2 T_D). This is roughly the drive current of a single inverter and does not depend on the number of stages. For square-law devices, I_DD,avg ∝ (V_DD − V_TH)², so\n\nRX ≈ (V_DD − V_TH) / (2 I_DD,avg)\n\nThis is on the order of 1/gm of one strongly-on transistor. It is typically the same order of magnitude as the equilibrium formula, but it is a different expression, set by large-signal switching rather than trip-point transconductances.\n\nThe equilibrium formula would remain approximately valid only if the oscillation amplitude were small enough that the devices stayed in saturation near the trip point, which is not the case for a three-inverter CMOS ring.",
        "format": "markdown",
        "sha256": "27bf3481242d555a2659fdee0d7c744964d35867075cab2eb4f2842fa9fe372b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly uses the three nodes’ capacitive switching current and accounts for the frequency’s supply dependence, then shows the resulting resistance remains on the order of 1/gm rather than becoming much larger. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 16547,
        "total_tokens": 20109,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 16547,
        "total_tokens": 20109,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The initial voltage gain decreases as M7 is made wider.**\n\nThis is a StrongARM latch. The reasoning below is from the standard analysis of its amplification phase, assuming square-law devices.\n\n1. When CK goes high, M3–M6 are initially off, and M1 and M2 discharge the capacitances at P and Q. The differential voltage grows as\n\n   |V_P − V_Q| ≈ (g_m1,2 / C_P,Q) · |V_in1 − V_in2| · t\n\n2. This phase ends when V_P and V_Q have fallen by about V_THN, which turns on M3 and M4. With each input transistor carrying a common-mode current I_CM, that takes\n\n   t ≈ C_P,Q · V_THN / I_CM\n\n3. The initial gain is therefore\n\n   A_v ≈ g_m1,2 · V_THN / I_CM ≈ 2V_THN / (V_GS − V_TH)_1,2\n\n4. A wider M7 has lower on-resistance, so the tail node sits closer to ground. This raises the tail current and the overdrive of M1 and M2. P and Q then discharge faster, leaving less time for amplification, and g_m/I_D of the input pair drops.\n\nIn the limit of a very wide M7, the tail node is near ground and the gain approaches its minimum, roughly 2V_THN / (V_in,CM − V_TH). A lower initial gain also means the offset and noise of the later stages (M3–M6) contribute more when referred to the input.",
        "format": "markdown",
        "sha256": "d75127010e4d9da6156e857b7d1197d7c835568ac910f8aefd6fd6cac9cc111b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain decreases and explains that a wider M7 raises tail current, shortening the amplification interval and reducing the input pair’s gm/ID. The extra details do not undermine the essential reasoning.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4805,
        "output_tokens": 2838,
        "total_tokens": 7643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2340,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4805,
        "output_tokens": 2838,
        "total_tokens": 7643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2340,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The initial voltage gain decreases as M7 is made wider.**\n\nThis circuit is the StrongARM latch. When CK goes high, M1 and M2 each draw a common-mode current I_CM = I_D7/2 and discharge the capacitances at P and Q, while M3 and M4 remain off. This amplification phase lasts until P and Q have fallen by about one threshold voltage:\n\nt ≈ C_P,Q · V_THN / I_CM\n\nDuring this time the differential current g_m1,2·V_in integrates on C_P,Q, so\n\n|V_P − V_Q| ≈ g_m1,2 · V_in · t / C_P,Q\n\nwhich gives\n\nA_v ≈ g_m1,2 · V_THN / I_CM = 2V_THN / (V_GS − V_TH)_1,2\n\nA wider M7 supplies more tail current, which raises the overdrive of M1 and M2. The transconductance g_m grows only as √I, while the amplification time shrinks as 1/I, so the ratio g_m/I_CM falls and the gain drops.\n\nIn the limit of a very wide M7, it operates in deep triode and the tail node sits near ground. The overdrive then approaches V_in,CM − V_TH, so the gain is at its lowest and depends on the input common-mode level.",
        "format": "markdown",
        "sha256": "8859c068327f1438927cc921ac68306b7e2bcc8ae878be3feb533c9b4a813985"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that increasing M7 width raises tail current and decreases the initial gain because transconductance grows more slowly than current. The additional limiting-case discussion does not undermine the essential answer.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4805,
        "output_tokens": 2441,
        "total_tokens": 7246,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2014,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4805,
        "output_tokens": 2441,
        "total_tokens": 7246,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2014,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The initial voltage gain decreases as M7 is made wider.** (The circuit is the StrongARM latch.)\n\n**Why:** When CK goes high, M1 and M2 each draw a current I_CM and discharge the capacitances at P and Q from V_DD. This amplification phase lasts until P and Q have fallen by about one threshold V_THN, at which point M3 and M4 turn on:\n\n- Duration of the phase: t ≈ C_P,Q · V_THN / I_CM\n- Differential voltage built up at P and Q: |V_P − V_Q| ≈ g_m1,2 · |V_in1 − V_in2| · t / C_P,Q\n\nDividing by the input difference gives the gain:\n\nA_v ≈ g_m1,2 · V_THN / I_CM ≈ 2V_THN / (V_GS − V_TH)₁,₂\n\nA wider M7 has a smaller drain-source drop and supplies more tail current. For a given input common-mode level, the tail node sits lower, so M1 and M2 have a larger overdrive (V_GS − V_TH). Since the gain is inversely proportional to that overdrive, it falls. Equivalently, I_CM rises faster than g_m, so P and Q discharge by V_THN sooner and there is less time to integrate the input difference.\n\nThe trade-off is that a wider M7 makes the circuit faster, but the lower gain means offset and noise from M3–M6 matter more when referred to the input.",
        "format": "markdown",
        "sha256": "6cdf269deed094404001aa02bce0b56a4442eccb121a65ff187eb7e76d366c3e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that initial gain decreases as M7 widens and explains that increased tail current outpaces the increase in input-pair transconductance, reducing the integration gain.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4805,
        "output_tokens": 2412,
        "total_tokens": 7217,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1925,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4805,
        "output_tokens": 2412,
        "total_tokens": 7217,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1925,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**To first order, the initial voltage gain does not change; the circuit just gets slower.**\n\nThis is the StrongARM latch. In the initial (amplification) phase, CK goes high, S1–S4 turn off, and M1–M2 draw a differential current from the capacitances at P and Q. M3–M6 are still off because P, Q, X and Y were all precharged to V_DD.\n\n- The differential voltage grows as |V_P − V_Q| ≈ g_m1,2·|V_in1 − V_in2|·t / C_P,Q, so the gain is A_v ≈ g_m1,2·t / C_P,Q.\n\n- This phase ends when P and Q have fallen by about one threshold V_THN, at which point M3 and M4 turn on. With common-mode current I_CM = I_D7/2 in each branch, that takes t ≈ C_P,Q·V_THN / I_CM.\n\nSubstituting:\n\nA_v ≈ g_m1,2·V_THN / I_CM ≈ 2V_THN / (V_GS − V_TH)₁,₂\n\nC_P,Q cancels out. A larger capacitance makes the differential voltage build up more slowly, but it also makes the common-mode level fall more slowly, so the phase lasts proportionally longer and the gain is the same.\n\nThe cost is a longer amplification phase and therefore a longer delay. A side benefit is lower input-referred noise, since the input devices' noise is integrated over a longer time on a larger capacitor.",
        "format": "markdown",
        "sha256": "5e8f4934d2fa1e588fc4ee4e879d6b1a22273bd6987ebd49f723bf862a3d246b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is unchanged and explains the cancellation: larger capacitance slows differential buildup but proportionally lengthens the amplification phase. It also identifies the increased delay.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4806,
        "output_tokens": 3387,
        "total_tokens": 8193,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2897,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4806,
        "output_tokens": 3387,
        "total_tokens": 8193,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2897,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**To first order, the initial voltage gain does not change.** This is the StrongARM latch, and the gain of its first (amplification) phase is independent of the capacitance at P and Q.\n\n**Why:**\n\n1. When CK goes high, M3–M6 are still off, so M1 and M2 simply discharge C_P and C_Q. The differential current g_m1,2(V_in1 − V_in2) is integrated on these capacitances:\n\n |V_P − V_Q| = g_m1,2 |V_in1 − V_in2| · t / C_P,Q\n\n2. This phase ends when P and Q have fallen by one threshold, V_THN, so that M3 and M4 turn on. With a common-mode current I_CM = I_D7/2 in each branch, that takes\n\n t ≈ C_P,Q · V_THN / I_CM\n\n3. Substituting, the capacitance cancels:\n\n A_v ≈ g_m1,2 · V_THN / I_CM ≈ 2V_THN / (V_GS − V_TH)₁,₂\n\nA larger C_P,Q makes the differential voltage build up more slowly, but the phase lasts proportionally longer, so the same gain is reached.\n\n**What does change:**\n\n- The amplification phase takes longer, so the latch is slower.\n- More charge is drawn from the supply each cycle, so power rises.\n- The input-referred noise falls, since it scales roughly as kT/C_P,Q.",
        "format": "markdown",
        "sha256": "76c4867dab3877ba3afe2889e76bcfc079bb0c14a5e356e9e6149c6557f07041"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes the initial gain is essentially unchanged and explains that the slower differential buildup is offset by a proportionally longer amplification phase, so capacitance cancels. The added secondary observations do not affect the essential answer.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4806,
        "output_tokens": 4257,
        "total_tokens": 9063,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3785,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4806,
        "output_tokens": 4257,
        "total_tokens": 9063,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3785,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**To first order, the initial voltage gain does not change.** This is the standard StrongARM-latch result: the capacitance at P and Q cancels out of the gain expression.\n\nWhen CK goes high, M3–M6 are still off (X, Y, P and Q were all precharged to V_DD, so V_GS3,4 = 0). M1 and M2 therefore simply discharge C_P and C_Q:\n\n- **Differential growth:** |V_P − V_Q| ≈ g_m1,2 · |V_in1 − V_in2| · t / C_P,Q\n- **Duration of the phase:** P and Q fall at a common-mode rate of I_CM / C_P,Q, where I_CM ≈ I_D7/2. The phase ends when they have dropped by V_THN and M3–M4 turn on, so t ≈ C_P,Q · V_THN / I_CM.\n\nSubstituting t into the first expression:\n\nA_v ≈ g_m1,2 · V_THN / I_CM ≈ 2V_THN / (V_GS − V_TH)_1,2\n\nC_P,Q cancels. A larger capacitance makes the differential voltage build up more slowly, but it also takes proportionally longer for P and Q to fall by V_THN, so the same gain is reached.\n\nWhat does change is that the amplification phase lasts longer, so the latch is slower and uses more dynamic power per cycle. The longer integration time also lowers the input-referred noise, which is why capacitance is sometimes deliberately added at P and Q.",
        "format": "markdown",
        "sha256": "f2585b1bc6a6f7bfa33820cd350f0acdc708d2869f38f8d88682f2e587361fdc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is unchanged and explains that the longer amplification interval compensates for the slower differential buildup as capacitance increases. The extra timing and noise comments are secondary.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4806,
        "output_tokens": 4087,
        "total_tokens": 8893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4806,
        "output_tokens": 4087,
        "total_tokens": 8893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**In general, the speed degrades.** This circuit is the StrongARM latch, and the reasoning follows from when M5 and M6 are actually on.\n\n1. **M5 and M6 are off during the early part of the decision.** After CK goes high, X and Y start at V_DD, so M5 and M6 stay off until X and Y have fallen by |V_THP|. Until then, M1–M4 do all the amplification and regeneration, and M5 and M6 only add gate and drain-junction capacitance to X and Y.\n\n2. **That added capacitance slows these phases.** The time for X and Y to fall by |V_THP| is roughly C_X,Y·|V_THP|/I_CM, where I_CM is about half the tail current. The regeneration time constant of the NMOS pair is roughly C_X,Y/g_m3,4. Both grow in proportion to C_X,Y, so wider PMOS devices lengthen them.\n\n3. **Once M5 and M6 turn on, they help only a little.** The time constant becomes roughly C_X,Y/(g_m3,4 + g_m5,6). But the PMOS devices have lower mobility and start with nearly zero overdrive, so they add less transconductance per unit of capacitance than the NMOS pair. The PMOS device on the falling side also briefly fights the NMOS pull-down.\n\nThe main job of M5 and M6 is to pull the high-side output back to V_DD and hold it there, which does not require strong devices. They are therefore usually kept small.\n\nOne caveat: if M5 and M6 are very small to begin with, or the external load capacitance dominates at X and Y, a modest increase in width can speed up the recovery of the high-side output. Beyond that point, wider devices make the latch slower.",
        "format": "markdown",
        "sha256": "965edf71ccd9179e6996a1b9690baa738398186a82352584664ee4cd4aae4253"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer identifies added parasitic capacitance as a real eventual limit, but its main conclusion reverses the initial trend. Wider M5/M6 initially strengthen cross-coupled regeneration, and that benefit dominates their added capacitance until an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 10056,
        "total_tokens": 14858,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9484,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 10056,
        "total_tokens": 14858,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9484,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The speed degrades.**\n\nThis is the StrongARM latch, and the reason follows from when M5 and M6 are actually on:\n\n1. **They are off for the critical part of the decision.** After CK goes high, X and Y start at V_DD, so M5 and M6 stay off through the amplification phase and the first part of regeneration, when only the NMOS pair M3–M4 is regenerating. They turn on only once X or Y has fallen by |V_THP|. Until then they contribute nothing but capacitance at X and Y (gate, drain junction, and gate-drain overlap capacitance, the last counted twice because of the cross-coupling).\n\n2. **More capacitance at X and Y slows regeneration.** With M3–M4 regenerating and their sources loaded by C_P,Q, the time constant is approximately\n\n   τ_reg ≈ (C_X,Y / g_m3,4) · 1 / (1 − C_X,Y / C_P,Q)\n\n   Wider M5 and M6 raise C_X,Y, which increases τ_reg directly and also through the (1 − C_X,Y/C_P,Q) factor. X and Y also discharge more slowly, so it takes longer to reach the point where the PMOS devices turn on.\n\n3. **Their added transconductance does not compensate.** Once on, M5 and M6 do add to the loop's transconductance, but they start with near-zero overdrive and have lower mobility than the NMOS devices. The g_m gained per unit of added capacitance is poor.\n\nThe one thing wider PMOS devices help is the final pull-up of the high output back to V_DD, but that is not what limits the decision time. This is why M5 and M6 are normally kept small, just strong enough to restore the high level.\n\nWider M5 and M6 also make reset harder (S3 and S4 must charge a larger C_X,Y) and increase dynamic power.",
        "format": "markdown",
        "sha256": "3e8e5eb2add661bffd3e7821a0f853743a95af0ebbca4147c9078554400d82ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the opposite of the key result: widening M5/M6 initially improves speed because their stronger regeneration outweighs added capacitance. It recognizes the real capacitance penalty that can eventually limit speed, but wrongly treats it as dominant from the outset.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 7219,
        "total_tokens": 12021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6605,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 7219,
        "total_tokens": 12021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6605,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The speed degrades.**\n\n- **M5 and M6 are off for most of the decision.** After precharge, X and Y sit at V_DD, so the PMOS devices have zero gate-source voltage. They stay off through the amplification phase and the early regeneration by M3–M4, and only turn on once X or Y has fallen by about |V_THP|. By then the output difference is already large and the decision is essentially made.\n\n- **While off, they act only as load capacitance.** Wider M5–M6 add gate and drain-junction capacitance at X and Y. This slows the initial discharge of X and Y by the M1–M2 currents and increases the NMOS regeneration time constant, roughly τ ≈ C_X,Y / g_m3,4.\n\n- **Even once on, they do not make up for it.** The regeneration time constant becomes roughly (C_n + C_p)/(g_mn + g_mp). PMOS devices have lower g_m per unit capacitance than NMOS (lower mobility, and little overdrive when they first turn on), so adding PMOS width raises this time constant rather than lowering it.\n\nThe main job of M5–M6 is to pull the \"high\" output back to V_DD and cut off static current. Wider devices do speed up that final pull-up slightly, but it is not what limits the speed. For that reason M5–M6 are normally kept small.",
        "format": "markdown",
        "sha256": "728bd401a9b6b10114d62ed04c53f0af6edf7756b2246ab617c6120a771eb99b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the key result: widening M5/M6 initially speeds regeneration by strengthening their pull-up action. It identifies added capacitance as a real eventual limitation, but wrongly treats it as dominant from the outset.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 4198,
        "total_tokens": 9000,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3758,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 4198,
        "total_tokens": 9000,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3758,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** the speed improves only up to a point and then degrades, so there is an optimum width. (This is my own analysis of the trade-off, not a quoted textbook answer.)\n\n**Why.** The delay of each latch is roughly the resistance of the conducting stack times the capacitance at its output node (X or Y):\n\nt_d ∝ (R_M1 + R_ck)·(C_fixed + C_ck)\n\n- R_ck is the on-resistance of the clocked transistor, proportional to 1/W_ck.\n- C_ck is the capacitance the clocked transistors add to X or Y, proportional to W_ck. In this topology the clocked devices are tied directly to the output nodes, so their drain junction and overlap capacitances load X and Y.\n- C_fixed is the gate capacitance of the next stage (the input devices of the following latch, or Inv3) plus wiring, which does not change.\n- R_M1 is the resistance of the input transistor (M1 or its PMOS counterpart), which also does not change.\n\nWidening the clocked transistors therefore has two opposing effects:\n\n1. **Lower R_ck.** This helps, but with diminishing returns, because the stack resistance can never fall below R_M1.\n2. **Higher C_ck.** This grows linearly with W_ck without limit.\n\nMinimising the product gives an optimum at\n\nW_ck,opt ≈ W_1·√(C_fixed / C_ck at W_ck = W_1)\n\nwhere W_1 is the width of the input transistor.\n\n**Consequences.**\n\n- If the clocked devices start out narrow compared with the input devices, widening them improves the speed.\n- Since the clocked devices' capacitance is typically comparable to the next stage's gate capacitance, the optimum lies near W_ck ≈ W_1. For a design that already has roughly equal widths, further widening buys little or nothing.\n- For large W_ck the delay approaches R_M1·C_ck, which is proportional to W_ck, so the speed degrades.\n\nWider clocked transistors also load the clock more heavily, which slows the clock edges and raises power.",
        "format": "markdown",
        "sha256": "ee6e14645f4164d94eff92d2a8d5d1a94cb03883404d737d0c7083dcfa9f8763"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says widening initially improves speed by reducing the clocked devices’ on-resistance, while added capacitance at the latch nodes eventually limits or reverses the benefit, giving an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2222,
        "output_tokens": 19720,
        "total_tokens": 21942,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19030,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2222,
        "output_tokens": 19720,
        "total_tokens": 21942,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19030,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The speed improves, but only up to a point.**\n\n- **Why it improves:** Each clocked transistor is in series with a data transistor (e.g., M1), so the drive of each latch is set by the sum of their on-resistances. The gates of the clocked devices are driven by CK and CK̄, not by X, Y, or Z. Widening them therefore lowers the series resistance without adding gate capacitance to the signal path, and X and Y charge and discharge faster.\n\n- **Why the benefit is limited:** The drains of the clocked devices sit directly on X and Y, so their junction and overlap capacitances grow in proportion to their width. Roughly, the stage delay is\n\n  τ ≈ (R_M1 + R_ck/k)(C_gate,next + k·C_D,ck),\n\n  where k is the factor by which the clocked devices are widened. As k grows, the resistance can at best fall to R_M1 (about a 2× gain if the devices started equal), while the capacitance keeps rising linearly.\n\n- **Result:** There is an optimum width. Beyond it, the improvement saturates and the speed eventually degrades. Wider clocked devices also load the clock more heavily, costing clock power.\n\nHow much headroom there is depends on the ratio of drain capacitance to gate capacitance in the process. If the drain parasitics are comparable to the gate capacitance and the clocked devices already match the data devices in width, the optimum is near that starting point and further widening gains little.",
        "format": "markdown",
        "sha256": "98f3c43ba766df6b26a3dc4829fa6dc20975c9d8e1e35f3cba4696517561390a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening the clocked transistors initially improves speed by reducing series on-resistance, while added drain capacitance eventually limits or reverses the benefit, giving an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2222,
        "output_tokens": 17292,
        "total_tokens": 19514,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2222,
        "output_tokens": 17292,
        "total_tokens": 19514,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It improves only up to a point, then levels off and degrades.** This is reasoned from first principles rather than quoted from the source's own solution.\n\nThe circuit is a C²MOS divide-by-2, where each clocked transistor sits in series with a data transistor (M1 or its PMOS counterpart) and has its drain tied directly to X or Y. Widening the clocked devices has two opposing effects:\n\n- **Lower series resistance.** The pull-down (or pull-up) path resistance is R_M1 + R_CK, and widening reduces only R_CK. The path can never be better than R_M1 alone, so the benefit saturates.\n- **Higher capacitance at X and Y.** The drain junction and overlap capacitances of the clocked devices load X and Y in proportion to their width, with no upper limit.\n\nA first-order estimate shows the trade-off. Let W_CK = k·W_data, let R₀ be the on-resistance per unit width, C_J the drain capacitance per unit width of the clocked devices, and C_G the gate capacitance per unit width of the next stage:\n\nτ ≈ (R_M1 + R_CK)(C_next-stage + C_drain,CK) = R₀[(C_J + C_G) + C_J·k + C_G/k]\n\nThis is minimum at k = √(C_G/C_J). Since C_G and C_J are usually comparable, the optimum is typically when the clocked devices are about as wide as the data devices, perhaps 1–2 times.\n\n- **Below the optimum** (clocked devices narrow relative to M1): widening them improves the speed somewhat.\n- **Beyond the optimum:** the resistance is essentially that of M1, while the capacitance at X and Y keeps growing, so τ ≈ R_M1·C_drain,CK rises with W_CK and the speed degrades.\n\nWider clocked devices also load CK and CK̄ more heavily, which costs clock-buffer power and slows the clock edges. They also couple more clock feedthrough onto X and Y when those nodes are floating.",
        "format": "markdown",
        "sha256": "ceeed1a8bba34accbba12ffb68be43163151dec9fa08cb252af3f4fcd550faf9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says widening initially improves speed by reducing clocked-device on-resistance, while added latch-node capacitance eventually limits or reverses the benefit. The extra first-order estimate is consistent with that trend.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2222,
        "output_tokens": 16131,
        "total_tokens": 18353,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15461,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2222,
        "output_tokens": 16131,
        "total_tokens": 18353,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15461,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, nodes X and Y are nominally in quadrature**, although Z is not exactly in quadrature with X.\n\n**Why**\n\n- The left C²MOS stage acts as an inverter (X = Z̄) only when CK is high. The right stage acts as an inverter (Y = X̄) only when CK is low. Inv₃ makes the number of inversions around the loop odd, so the loop toggles and divides by 2, giving an output period of 2T_CK.\n- X can therefore change only just after a rising edge of CK, and Y only just after a falling edge.\n- With a 50% duty cycle, these edges are T_CK/2 apart. That is one quarter of the output period, i.e. 90°.\n\nThe sequence over one output period is:\n\n| Clock edge | Event |\n|---|---|\n| CK ↑ (t = 0) | X rises |\n| CK ↓ (T_CK/2) | Y falls, then Z rises one inverter delay later |\n| CK ↑ (T_CK) | X falls |\n| CK ↓ (3T_CK/2) | Y rises, then Z falls |\n\nSo Y leads X by 90° (equivalently, Ȳ lags X by 90°).\n\n**Caveats**\n\n- **Z is not in exact quadrature with X.** Z is Y inverted and delayed by Inv₃, so its phase is off by that inverter delay. The quadrature outputs should be taken from X and Y, through identical buffers.\n- **The two latch delays must match.** X is loaded by the second latch's input transistors, while Y is loaded by Inv₃. Unless these capacitances are equal, the clock-to-output delays differ and a phase error results.\n- **The clock must be well behaved.** Any departure from 50% duty cycle, or skew between CK and its complement, translates directly into quadrature error.\n- **Z must settle in time.** The second latch delay plus the Inv₃ delay must fit within T_CK/2, so that Z is settled before CK rises. Otherwise X's transition is set by the arrival of Z rather than by the clock edge, and the quadrature is corrupted.",
        "format": "markdown",
        "sha256": "56c2b86a3144498b8183cb70d3cb606d582f16444745b76b379fab18250d5db4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies nominal quadrature from the divide-by-two latches and explains both sources of phase error: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2203,
        "output_tokens": 8675,
        "total_tokens": 10878,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2203,
        "output_tokens": 8675,
        "total_tokens": 10878,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, nominally: the waveforms at X and Y are 90° apart.**\n\n**Why**\n\n- The first clocked inverter (Z → X) is transparent when CK is high and holds X when CK is low.\n- The second clocked inverter (X → Y) is transparent when CK is low and holds Y when CK is high.\n- Inv3 gives the loop a net inversion, so the circuit toggles and acts as a master‑slave ÷2.\n\nSo X can change only on the rising edges of CK, and Y only on the falling edges:\n\n| Clock edge | Result |\n|---|---|\n| CK ↑ | X ↑ |\n| CK ↓ | Y ↓ (then Z ↑) |\n| CK ↑ | X ↓ |\n| CK ↓ | Y ↑ (then Z ↓) |\n\nX and Y are both square waves with period 2T_CK. Their edges are offset by T_CK/2, which is one quarter of the output period, i.e., 90°.\n\n**Caveats**\n\n- **Z is not a new phase.** It is just the complement of Y, delayed by Inv3. X and Z are also about 90° apart, but with an error equal to the inverter delay.\n- **Matching matters.** Exact quadrature requires a 50% input duty cycle and equal clock‑to‑output delays for the two latches. Node X drives the second latch while node Y drives Inv3, so the loading at the two nodes should be equalized (including any output buffers).\n- **Speed limit.** The delay of Inv3 does not affect the X–Y phase as long as Z settles before the next rising edge of CK. Near the maximum speed this no longer holds, and the quadrature degrades.\n- **Single‑ended outputs.** The circuit gives only two quadrature phases directly. Obtaining all four (0°, 90°, 180°, 270°) needs extra inverters, whose delays add phase error.",
        "format": "markdown",
        "sha256": "d21f96e5c62e45de9b596b9932da92cb2d88e119b27dcd1584f41e01eb803dfd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the latches switching on opposite clock edges, and explains both departures from exact quadrature: Inv3 delay skews Z, while unequal loading can give the latch outputs different delays.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2203,
        "output_tokens": 10611,
        "total_tokens": 12814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2203,
        "output_tokens": 10611,
        "total_tokens": 12814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Only approximately.** X and Y are nominally 90° apart, but Inv3 makes the loop asymmetric, so this is not an accurate quadrature generator.\n\n**Why X and Y are nominally in quadrature**\n\n- The left stage is transparent when CK is high (X = Z̄) and holds when CK is low.\n- The right stage is transparent when CK is low (Y = X̄) and holds when CK is high.\n- Inv3 supplies the third inversion, so the loop toggles once per input cycle. This is a ÷2 circuit with output period 2T_CK.\n\nX therefore changes just after each rising edge of CK, and Y just after each falling edge. Their transitions are T_CK/2 apart, which is one quarter of the output period, or 90°. (Y is an inverted copy of X shifted by a quarter period.) This assumes a 50% duty-cycle clock and equal clock-to-output delays in the two stages.\n\n**Why it is not exact**\n\n- **Delay of Inv3:** Z lags Y by the inverter delay, so X and Z differ by 90° + 360°·t_inv·f_out. For example, a 10 ps inverter delay at a 5 GHz output gives an 18° error.\n- **Unequal loading:** X drives a latch input while Y drives Inv3, so the two clock-to-output delays differ unless they are deliberately equalized.\n- **High-speed operation:** Near the maximum speed, the transitions are no longer timed purely by the clock edges. The loop then behaves like three unequal stages in a ring, and the X–Y spacing departs from 90°.\n- **Single-ended outputs:** Getting the complementary phases (180°, 270°) needs more inverters, which add more skew.\n\nFor accurate quadrature, one uses a differential or pseudo-differential version in which the inversion comes from cross-wiring the outputs. That removes Inv3 and makes the two latches identical, so symmetry guarantees the 90° relationship.",
        "format": "markdown",
        "sha256": "202042785002a0ab805ba41358ea499321cf322147f961d3b7acaa3df965cbdd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the latches switching on opposite clock phases, and explains both departures from exact quadrature: Inv3 delay and unequal loading of the latch outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2203,
        "output_tokens": 19493,
        "total_tokens": 21696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2203,
        "output_tokens": 19493,
        "total_tokens": 21696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The speed improves, with diminishing returns.**\n\n**Why:** In this C²MOS divide-by-2 circuit, the clocked transistors sit next to the supply rails, in series with the input (data) transistors. Their junction capacitances therefore appear at the internal source nodes and on the clock lines, not at the latch output nodes that carry the signal around the loop.\n\nWidening the clocked devices lowers their on-resistance, so each latch can charge and discharge its output node faster, while the capacitance at that output node stays the same. The delay around the loop (latch 1, latch 2, inverter) falls, and the maximum toggle frequency rises.\n\nA rough Elmore estimate for one pull-down (or pull-up) path shows this:\n\nτ ≈ R_ck(C_int + C_out) + R_in·C_out\n\nHere R_ck ∝ 1/W_ck is the clocked device's resistance, C_int ∝ W_ck is the internal-node capacitance, R_in is the input device's resistance, and C_out is the output-node capacitance.\n\n- The product R_ck·C_int is independent of W_ck.\n- The term R_ck·C_out shrinks as W_ck grows.\n\nSo τ decreases monotonically and approaches the delay of a plain inverter, R_in·C_out plus a constant. Beyond a certain width there is little further gain.\n\n**The price:**\n\n- The clock (the VCO or its buffer) must drive a larger capacitance. This costs power, and with a real clock driver the slower clock edges can eventually cancel the benefit.\n- The larger internal-node capacitance increases charge sharing with the output node when a latch is in its hold phase and its input changes, along with more clock feedthrough. If the clocked devices are made too wide, this can disturb the stored state.",
        "format": "markdown",
        "sha256": "d312cf23b7cbf427cee7bf7f08f309d4b79e5417e37853467fbcc070b5cc8822"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says widening the clocked devices improves speed by lowering their on-resistance while adding little output loading. It also identifies charge sharing as a limit when the devices become too wide, matching the full-credit rule.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 9924,
        "total_tokens": 12209,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9340,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 9924,
        "total_tokens": 12209,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9340,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The speed improves, though with diminishing returns.**\n\n**Why:** In each C²MOS latch the clocked transistors sit at the supply rails, in series with the data (inner) transistors. When a latch is enabled, its output node (X or Y) is charged or discharged through the series combination of a data transistor and a clocked transistor:\n\nt_d ≈ (R_data + R_clk)·C_out + R_clk·C_int\n\nwhere C_out is the capacitance at the latch output and C_int is the capacitance at the internal node between the two stacked devices.\n\n- Widening the clocked devices lowers R_clk in proportion to 1/W_clk.\n- Their gates are driven by CK and CK̄, not by X, Y or the inverter output, so C_out does not increase. C_out consists only of the data transistors' drain capacitance and the next stage's gate capacitance.\n- Their drain junction capacitance appears only at the internal node. Since C_int grows with W_clk while R_clk falls with it, the term R_clk·C_int stays roughly constant.\n\nSo the first term shrinks and the latch delay falls. The maximum clock frequency is set by the loop delay, roughly 1/(T_latch1 + T_latch2 + T_inv), so the divider can toggle faster.\n\n**Limits and costs:**\n\n- **Diminishing returns:** once R_clk is much smaller than R_data, the delay approaches R_data·C_out plus a constant, and further widening gains nothing.\n- **Clock loading:** the larger gate capacitance must be driven by the clock source (the VCO or its buffer), which costs power or slows the clock edges.\n- **Charge sharing:** the larger internal-node capacitance shares more charge with the floating nodes X and Y during the hold phase, degrading the stored levels. This limits how far the widths can be increased.",
        "format": "markdown",
        "sha256": "37016e3418fb52c1f83fb97e3427d790272cf9563438bac6978c9e20c96c30e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed by lowering their series resistance without significantly loading the outputs, and identifies charge sharing as a limit on further widening.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 14576,
        "total_tokens": 16861,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 14576,
        "total_tokens": 16861,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The speed improves, with diminishing returns.**\n\nThis is a C²MOS divide-by-two loop in which the clocked transistors sit next to the supply rails and the data (inverter) transistors sit next to the output nodes. Two things follow from that placement:\n\n- **Lower series resistance.** Each clocked device is in series with a data device, so its on-resistance limits the current that charges or discharges the output node. Widening it lowers that resistance, and each latch (clocked inverter) switches faster.\n\n- **No extra load on the critical nodes.** The gate capacitance of the clocked devices loads only the CK and C̅K̅ lines. Their drain junction capacitance appears at the internal stack nodes, not at the latch outputs, so the capacitance on the storage nodes is essentially unchanged.\n\nA rough Elmore estimate shows the trend. With R_ck ∝ 1/W_ck the on-resistance of the clocked device, R_in that of the data device, C_X the internal-node capacitance and C_out the output-node capacitance:\n\nt_d ≈ R_ck(C_X + C_out) + R_in·C_out\n\nThe part of C_X contributed by the clocked device grows with W_ck, but its product with R_ck stays constant. Every other term involving R_ck falls as W_ck rises. So the delay decreases monotonically and approaches that of a plain inverter, R_in·C_out plus a small constant, at which point the maximum toggle frequency stops improving.\n\n**Costs of widening:**\n\n- The clock source (VCO or buffer) must drive a larger capacitance, which costs power and can slow the clock edges.\n- The larger internal-node capacitance causes more charge sharing with the floating output node when the latch is in hold mode and its input changes. If the clocked devices are made too wide, this can disturb the stored state.\n\nIn practice the clocked devices are made only moderately wider than the data devices.",
        "format": "markdown",
        "sha256": "83cc9de2b7b1c2ac23cf9cecad6ef95db9868ac4832c93010d036c99d13a88dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening improves speed by reducing series on-resistance while adding little load to the output path. It also identifies internal-node charge sharing as a limit on how far the devices should be widened, consistent with the expected swing degradation.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 8546,
        "total_tokens": 10831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7923,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 8546,
        "total_tokens": 10831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7923,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result: this is a dynamic divide-by-two circuit.** Each switch-plus-inverter is a dynamic latch, and the two latches are clocked on opposite phases, forming a master–slave flip-flop. The third inverter gives the loop an odd number of inversions, so the flip-flop is fed its own complement and toggles once per clock period.\n\n## Operation\n\nCall the switches S1 (CK) and S2 (CK̄), and the inverters Inv1, Inv2, Inv3 from left to right. Name the nodes X (input of Inv1), Y (output of Inv1), Z (input of Inv2) and A (output of Inv3, fed back to S1). Because of the two inversions between them, A = Z logically. Assume ideal switches and complementary clocks.\n\n- **CK high (S1 on, S2 off):** X tracks A, so X = Z and Y = Z̄. Z floats and holds its value on the input capacitance of Inv2, so nothing else changes.\n- **CK low (S1 off, S2 on):** X holds its value on the input capacitance of Inv1, so Y stays fixed. Z is driven to Y, which is the complement of its old value. A flips as well, but cannot reach X because S1 is off.\n\n| Phase | X | Y | Z | A |\n|---|---|---|---|---|\n| CK = 1 | 0 | 1 | 0 | 0 |\n| CK = 0 | 0 | 1 | 1 | 1 |\n| CK = 1 | 1 | 0 | 1 | 1 |\n| CK = 0 | 1 | 0 | 0 | 0 |\n\nThe pattern then repeats, so every node has a period of 2T_CK and f_out = f_CK/2. Z and A change just after the falling edges of CK, while X and Y change just after the rising edges. For a 50% clock duty cycle, X and Z are therefore 90° apart, giving quadrature outputs.\n\n## Role of the inverters\n\n- **Odd number of inversions:** With only two inverters, S2 would write back into Z the value it already holds. The loop would simply store its state and never toggle.\n- **Inv1 as a buffer:** It separates the two storage nodes, so each node is driven by an inverter output when its switch turns on, rather than sharing charge with another floating node.\n\n## Limitations\n\n- **Minimum clock frequency:** The states are stored on the floating nodes X and Z for half a clock period each. Leakage droop, roughly I_leak·(T_CK/2)/C, must stay within the noise margin, so the circuit fails if the clock is too slow or is stopped.\n- **Maximum clock frequency:** In one clock period the signal must travel once around the loop. With switch delay T_S and inverter delay T_D, this gives roughly f_CK,max ≈ 1/(2T_S + 3T_D). The corresponding output frequency is the frequency at which the three inverters would oscillate as a ring if both switches were left on.\n- **Clock overlap:** If CK and CK̄ overlap, or have slow edges, both switches conduct and the loop briefly becomes a three-stage ring. This is harmless only if the overlap is much shorter than the loop delay.\n- **Real MOS switches:** A single NMOS switch passes a degraded high level (about V_DD − V_TH). Charge injection and clock feedthrough also disturb the floating nodes.",
        "format": "markdown",
        "sha256": "e6c6fd0615c9ab94510049d5a2c356bf68795cc1306633fccbaa20673ba4092d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic-latch divide-by-two and explains the alternating clock phases and half-rate output; the additional details are not needed for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1433,
        "output_tokens": 16223,
        "total_tokens": 17656,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15105,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1433,
        "output_tokens": 16223,
        "total_tokens": 17656,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15105,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**This is a dynamic divide-by-two circuit.** Each switch followed by an inverter is a dynamic latch. The two latches are clocked on opposite phases, so they form a master–slave flip-flop, and the third inverter gives the loop a net inversion, so the flip-flop toggles.\n\n**Operation**\n\nCall the CK switch S1 and the CK-bar switch S2. Let A be the input of Inv1, B its output, C the input of the second inverter, and X the output of the last inverter (the node fed back to S1). Two inverters follow C, so X = C.\n\n| Phase | Switches | What happens |\n|---|---|---|\n| CK high | S1 on, S2 off | A tracks X, and B becomes the complement of X. C floats and holds its value, so X is frozen. |\n| CK low | S1 off, S2 on | A floats and holds, so B stays at the complement of the old X. C takes B's value, so X flips. |\n\nX therefore toggles once per clock period, on each falling edge of CK, and A and B toggle on each rising edge. Every node has a period of 2T_CK, so f_out = f_CK/2.\n\nThe stored states (A, C) cycle through 00 → 01 → 11 → 10 → 00. All four states lie on this one cycle, so the circuit cannot get stuck and needs no reset.\n\n**Key properties**\n\n- **Odd number of inversions:** With only two inverters (one per latch), the feedback would be positive and the loop would simply hold its state.\n\n- **Maximum speed:** The signal must travel once around the loop in each clock period. So T_CK must exceed roughly the total loop delay: three inverter delays plus the two switch RC delays. Equivalently, the highest output frequency is about the frequency at which the same loop would oscillate as a three-inverter ring if both switches were on.\n\n- **Minimum speed:** The state is stored on the parasitic capacitance of the floating nodes A and C. If the clock is too slow, leakage corrupts the stored level, and a node drifting toward mid-supply also draws static current in the following inverter. Unlike a static divider, this circuit has a lower frequency limit.\n\n- **Clocking:** The switches need complementary, nearly rail-to-rail clocks, and are best built as transmission gates to avoid a threshold drop. If CK and CK-bar overlap so that both switches are on for longer than about one latch delay, data races through both latches and the division is corrupted.\n\n- **Outputs:** With a 50% duty-cycle clock, B and X are nominally 90° apart at the output frequency. The two halves of the loop have unequal delays (one inverter versus two), so the quadrature is not accurate.\n\nThe circuit draws no static current and is compact, which is the usual reason to choose it over a current-steering divider when the clock swing is large enough.",
        "format": "markdown",
        "sha256": "f2442b941627d2044761edf13070c74bdbf2e2e81fa413ac4f51e96cfc0bb6e7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic divide-by-two using oppositely clocked latches. The golden solution explicitly awards full credit for this identification; the additional implementation details are secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1433,
        "output_tokens": 17827,
        "total_tokens": 19260,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1433,
        "output_tokens": 17827,
        "total_tokens": 19260,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The circuit is a dynamic divide-by-two stage: a master–slave flip-flop built from two dynamic latches, with its inverted output fed back to its input.**\n\nThe figure names only Inv₁, so I'll label the rest: S₁ is the CK switch, S₂ the C̅K̅ switch, X and Y are the input and output of Inv₁, Z is the input of the second inverter, W its output, and Q the output of the third inverter (fed back to S₁).\n\n**Structure**\n\n- Each switch plus the inverter after it is a dynamic latch. When the switch opens, the state is held on the inverter's input capacitance.\n- The two latches are clocked on opposite phases, so together they form a master–slave flip-flop.\n- The loop contains three inversions, so the flip-flop always samples the complement of its own state and toggles.\n\n**Operation**\n\n- **CK high (S₁ on, S₂ off):** Z holds its value, so Q = Z. The master is transparent: X = Q and Y = Z̅. The loop is broken at S₂.\n- **CK low (S₁ off, S₂ on):** X holds, so Y stays at the complement of the old Z. S₂ passes Y to Z, so Z flips, and W and Q follow. The loop is broken at S₁, so the new Q cannot reach X until CK rises again.\n\n| Half-cycle | CK | X | Y | Z | W | Q |\n|---|---|---|---|---|---|---|\n| 1 | 1 | 0 | 1 | 0 (held) | 1 | 0 |\n| 2 | 0 | 0 (held) | 1 | 1 | 0 | 1 |\n| 3 | 1 | 1 | 0 | 1 (held) | 0 | 1 |\n| 4 | 0 | 1 (held) | 0 | 0 | 1 | 0 |\n\nThe pattern then repeats. Z, W and Q toggle on every falling clock edge, and X and Y on every rising edge. Every node therefore has a period of 2T_CK, so f_out = f_CK/2 with a 50% duty cycle. X and Y are offset from Q and W by T_CK/2, a quarter of the output period, so quadrature phases are available.\n\n**Why three inverters**\n\n- With an even number of inversions the stored state would simply recirculate and the circuit would never toggle.\n- With Inv₁ alone, the feedback node would be an undriven capacitor that has to charge X by charge sharing, which is not robust.\n\n**Limitations**\n\n- **Maximum speed:** the signal must travel around the loop (two switches and three inverters) in roughly one clock period. So f_CK,max ≈ 1/(2t_sw + 3t_inv), about twice the frequency at which the loop would oscillate as a ring.\n- **Minimum speed:** X and Z float for half a cycle each, and leakage erodes the stored level. The droop I_leak·T_CK/(2C) must stay well below V_DD/2, so the circuit fails if the clock is too slow or stops. A static divider has no such limit.\n- **Clock overlap:** if CK and C̅K̅ are high at the same time (skew or slow edges), both switches conduct and the loop becomes a three-inverter ring. Data can then race through and cause extra toggles. The critical path is the rising edge of CK, where only S₁ and Inv₁ separate X from Z. With both switches permanently on, the circuit is simply a ring oscillator.\n- **Switches and clock:** NMOS-only switches pass a degraded high level (V_DD − V_TH), which causes static current in the inverters. Transmission gates and rail-to-rail complementary clocks are preferred.",
        "format": "markdown",
        "sha256": "bbcf7afc7c6c0b7dea706870d928f22c53984d017eebe09d9403b92197fd28b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic-latch divide-by-two and explains the master–slave feedback toggling that gives an output at half the clock frequency. Extra internal details are not required for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1433,
        "output_tokens": 15928,
        "total_tokens": 17361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14713,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1433,
        "output_tokens": 15928,
        "total_tokens": 17361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14713,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** the red inverter is an unclocked feedforward path around the first dynamic latch (the CK switch and Inv₁). It can raise the divider's top speed, but it undermines that latch's hold function, which narrows the usable frequency range and costs power.\n\nThis is reasoned from the schematic alone. The black loop is a dynamic ÷2: two switch-plus-inverter latches and a third inverter for net inversion. The red inverter's input is the divider output (the left node), and its output is Inv₁'s output.\n\n**CK high (first switch on):** Inv₁ and the red inverter see the same input and drive Inv₁'s output the same way. The red path skips the switch's RC delay, so this node moves sooner and with more drive.\n\n**CK low (first switch off, second on):** Inv₁ is supposed to hold its output while the second latch samples it. About two gate delays later the divider output toggles, and the red inverter then pulls Inv₁'s output the opposite way. What happens next depends on sizing:\n\n- **Red inverter much weaker than Inv₁:** the node is pulled only partway. You get static contention current and a degraded logic level, but also a head start on the next transition.\n- **Red inverter comparable or stronger:** the node flips while the second switch is still on, and the change races around the red inverter, the CK̄ switch and the two right-hand inverters. That path is a three-stage ring oscillator whenever CK is low.\n\n**Net effect on performance:**\n\n- **Maximum speed:** tends to improve, because the loop delay is shorter. Near the top end the circuit behaves like a ring oscillator injection-locked by the clock. The gain is partly offset by the added capacitance on the two nodes the red inverter touches.\n- **Minimum speed:** gets worse. The plain circuit works down to leakage-limited frequencies. With a strong red inverter, half the clock period must be shorter than roughly one trip around that ring (about three gate delays plus the switch delay), or the output toggles more than once per cycle.\n- **Power and robustness:** there is contention current every cycle, reduced noise margin, and behaviour that depends on the strength ratio between the red inverter and Inv₁.",
        "format": "markdown",
        "sha256": "94902356fc0b2e864fc76c3a6b5be49b033ec8c271fb818cd5560ef7a47715ce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the bypass feedforward path and its speed benefit, as well as the unclocked regenerative loop that can corrupt division at low clock rates and raise the minimum usable frequency. The additional power and loading discussion does not contradict the essential tradeoff.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1232,
        "output_tokens": 23928,
        "total_tokens": 25160,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23208,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1232,
        "output_tokens": 23928,
        "total_tokens": 25160,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23208,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** the red inverter is a feedforward path around the first (master) latch. It can raise the maximum speed, but it weakens the master's ability to hold its state, which costs power, logic levels, and the low-frequency end of the operating range.\n\n**Why:** the black circuit is a dynamic ÷2. The CK switch and Inv₁ form the master latch, the C̄K̄ switch and the next inverter form the slave, and the last inverter provides the net inversion. Call the fed-back node on the left A and the output of Inv₁ X. The red inverter drives X from A with the same polarity as Inv₁, bypassing the CK switch and Inv₁.\n\n- **CK high (master transparent):** Inv₁ and the red inverter both drive X toward Ā, so they help each other. The red path is the faster one because it does not wait for the switch resistance to charge Inv₁'s input capacitance. X begins to change as soon as A changes, so the loop delay is shorter and the maximum input frequency is higher.\n\n- **CK low (master should hold):** the slave is transparent, so A toggles one switch delay and two inverter delays after CK falls. Inv₁ is still holding the old value at X, while the red inverter now pulls X the opposite way. For the rest of that half cycle the two inverters fight, with these consequences:\n  - Static current flows.\n  - The level at X is degraded, and so is the slave's input, since that switch is on.\n  - If the red inverter is strong enough to pull X past the trip point, the state races through. The red inverter, the closed C̄K̄ switch and the two right-hand inverters form a three-stage ring oscillator, so the circuit toggles more than once per clock period and no longer divides by two.\n\n**Net effect:** near the top of the frequency range, A toggles about when CK rises, so the conflict is brief and the red inverter mostly helps. At lower frequencies the conflict lasts longer and it mostly hurts. The circuit moves from a true master-slave divider toward an injection-locked ring oscillator: faster, but with a narrower frequency range, less robustness, and more power.\n\nThe red inverter must therefore be much weaker than Inv₁, which limits the speed benefit. It also adds some capacitance at A and X.",
        "format": "markdown",
        "sha256": "a475c760e2cb58b997bd16fba395e4baa79c0c70c492380c2a0ed98c851738f5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the red inverter as a feedforward path that bypasses part of the first latch and improves high-speed operation, while explaining that the unclocked branch can fight the held state and form a regenerative loop at low clock rates, raising the minimum usable frequency. Minor extra claims do not change the central conclusion.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1232,
        "output_tokens": 23341,
        "total_tokens": 24573,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22603,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1232,
        "output_tokens": 23341,
        "total_tokens": 24573,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22603,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** the red inverter is a feedforward path around the first dynamic latch (the CK switch plus Inv₁). It can raise the top speed slightly, but it fights Inv₁ during the phase when that latch should hold, so the divider loses robustness and low-frequency operation. How severe this is depends on how strong the red inverter is relative to Inv₁.\n\n**Why**\n\nThe black circuit is a dynamic divide-by-2: two switch-plus-inverter latches and a third inverter for net inversion. Call the fed-back output node A (the left node) and the output of Inv₁ node Y. The red inverter drives Y directly from A.\n\n- **CK high (first switch on):** Inv₁'s input equals A, so Inv₁ and the red inverter drive Y to the same value. The red path avoids the switch's RC delay, so Y settles faster and the maximum frequency can go up somewhat. This is partly offset by the capacitance the red inverter adds at A and Y.\n\n- **CK low (first switch off, second on):** Inv₁ is supposed to hold Y while the new value passes through the second switch and the two inverters and toggles A. Once A toggles, the red inverter pulls Y the opposite way to Inv₁.\n  - *Weak red inverter:* Inv₁ wins and the circuit still divides. However, static current flows for the rest of the half-cycle, and the logic level at Y (and at the next inverter's input) is degraded, reducing noise margin.\n  - *Comparable or stronger red inverter:* it overrides Inv₁. The red inverter, the second switch and the two inverters then form a three-stage ring that is closed whenever CK is low. The signal races around this loop and the output can toggle more than once per clock cycle. Division is correct only if the CK-low interval ends before the false transition gets through, which requires a clock frequency on the order of the ring's own oscillation frequency or higher.\n\n**Net effect**\n\nThe circuit moves from a true master-slave dynamic divider, which works from a leakage-limited low end up to its maximum speed, toward a ring oscillator with one series switch, which behaves as an injection-locked divider. That gives:\n\n- a somewhat higher maximum speed;\n- a much higher minimum frequency, so a narrower operating range;\n- extra power from contention;\n- free-running oscillation if the clock is stuck low (when the red inverter is strong).\n\nWith a strong red inverter, Inv₁ and the first switch become essentially redundant.",
        "format": "markdown",
        "sha256": "5aefeec044bc843edb5d20c7601f8d29a0d818b6eb6d75a4eefb83c595c1afea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the red inverter as an unclocked feedforward path that bypasses the first latch path and can improve high-speed operation, while explaining how it fights Inv₁ and can form a toggling loop at low clock rates, raising the minimum usable frequency. The extra discussion of contention and ring behavior is consistent with the essential tradeoff.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1232,
        "output_tokens": 19366,
        "total_tokens": 20598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18550,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1232,
        "output_tokens": 19366,
        "total_tokens": 20598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18550,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I don't agree: the answer misreads how the red inverter is connected.**\n\n**What the schematic shows**\n\n- The red inverter's input is the far-left node, which is the fed-back output of the last inverter, *before* the CK switch.\n- Its output (the bubble side) is the output of Inv1, the node that feeds the C̅K̅ switch.\n\nSo the red inverter points the same way as Inv1 and sits in parallel with the series combination of the CK switch and Inv1. It is a feedforward (bypass) path, not a feedback path.\n\n**Why it is not a keeper**\n\n1. A cross-coupled latch needs two inverters back to back, each output driving the other's input. Here the two outputs are tied together and the red inverter's input is not Inv1's output.\n2. The only loop the red inverter closes is red inverter → C̅K̅ switch → the two right-hand inverters → back. That is three inversions, which makes a ring oscillator loop, not a bistable one.\n3. The nodes that leak are the floating gate nodes: Inv1's input (after the CK switch) when CK is low, and the second inverter's input (after the C̅K̅ switch) when CK is high. The red inverter touches neither, so the leakage-imposed minimum clock frequency is unchanged.\n\nA real keeper would be a weak inverter from Inv1's output back to Inv1's input, on the inverter side of the switch, with a similar one around the second stage.\n\n**What it actually does**\n\n- **CK high:** the red inverter is simply in parallel with Inv1, adding drive at Inv1's output.\n- **CK low:** Inv1 holds the sampled value, the second stage passes it on, and the loop output toggles. The red inverter then sees the new output and pulls Inv1's output towards its next value, against Inv1.\n\nIt is therefore an unclocked feedforward path around the first dynamic latch. I can't see the source text, but the plausible purpose is speed: Inv1's output starts moving towards its next state without waiting for the CK switch and Inv1. The divider then behaves more like a ring oscillator that is gated, or injection-locked, by the clock.\n\nThe costs are contention at Inv1's output (static current and a degraded level) and, if the red inverter is not much weaker than Inv1, a new race. Whenever C̅K̅ stays high for longer than about one trip around the red loop, the loop toggles again. That gives a minimum clock frequency set by gate delays, far higher than the leakage limit.\n\nSo the red inverter does not remove the minimum-frequency requirement; if anything it tightens it.",
        "format": "markdown",
        "sha256": "ee72c5de520ec5e0faad1e840512d5b8ec6d271011a6530e557127413eba1011"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly rejects the keeper interpretation, identifies the red inverter as a feedforward bypass that can speed operation, and explains that its unclocked loop can overpower the intended latch behavior at low clock rates, raising the minimum usable frequency. The distinction between the leakage limit and this additional limitation does not change the conclusion.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1307,
        "output_tokens": 27468,
        "total_tokens": 28775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1307,
        "output_tokens": 27468,
        "total_tokens": 28775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I don't agree. The answer misreads how the red inverter is connected.**\n\n**Why it is not a keeper**\n\n- The red inverter's input (left side) connects to the node to the left of the CK switch, which is the output of the last inverter fed back along the bottom wire. Its output (bubble side) connects to the output of `Inv1`.\n- So the two inverters point the same way and share an output node, with their inputs on opposite sides of the CK switch. A cross-coupled latch would need the red inverter reversed: input at `Inv1`'s output, output at `Inv1`'s input (to the right of the CK switch).\n- The nodes that leak are the floating ones: `Inv1`'s input when the CK switch is open, and the next inverter's input when the C̅K̅ switch is open. The red inverter drives neither, so the minimum clock frequency requirement remains.\n\n**What it actually does**\n\nIt is a feedforward path that bypasses the CK switch and `Inv1`, and its purpose is speed.\n\n- **CK high:** the CK switch is closed, so the red inverter and `Inv1` see the same input and drive the same node. They simply work in parallel.\n- **CK low:** the CK switch is open, but the red inverter still senses the output. The red inverter, the closed C̅K̅ switch and the two right-hand inverters now form a three-inverter ring. As soon as the output toggles, the red inverter starts pulling `Inv1`'s output toward its next value, without waiting for the next clock edge, the switch and `Inv1`.\n\nThe divider therefore behaves like a ring oscillator that the clock synchronizes (injection-locks), rather than a chain that waits for the clock at every step. This raises the maximum operating frequency and reduces the clock swing needed near the ring's natural frequency.\n\n**The cost**\n\n- During part of the CK-low phase the red inverter fights `Inv1`, which is still holding the old value. It must therefore be weaker than `Inv1`, and it draws some contention current.\n- If anything, it makes low-frequency operation worse: if CK stays low too long, the ring tends to free-run and the output can toggle more than once.\n\nSo the red inverter addresses the upper frequency limit, not the lower one. Making the divider static would require backward-pointing keeper inverters on the two floating nodes.",
        "format": "markdown",
        "sha256": "7777dc1432af780fa380e0278d0570becab33e58944b15cd15fe32acf29b8fea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly rejects the keeper interpretation, identifies the red inverter as a feedforward path bypassing the CK switch and Inv1, and explains both its high-speed benefit and its low-frequency tendency to form a free-running loop that corrupts division. Extra claims do not change the central answer.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1307,
        "output_tokens": 21369,
        "total_tokens": 22676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20613,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1307,
        "output_tokens": 21369,
        "total_tokens": 22676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20613,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I don't agree.** The answer describes a keeper, but that is not how the red inverter is connected in the figure.\n\n**Why it is not a keeper**\n\n- The red inverter's input is tied to the node to the left of the CK switch, which is the loop's feedback node (the output of the last inverter). Its output is tied to Inv1's output.\n- It therefore points the same way as Inv1. The two inverters share an output node, and their inputs are separated by the CK switch.\n- A cross-coupled keeper would point backwards: input at Inv1's output, output at Inv1's input (the floating node to the right of the CK switch).\n- There is no two-inverter positive-feedback loop, so there is no latch. When CK is low, Inv1's input still floats and leaks. The second dynamic node, after the CK-bar switch, is untouched as well.\n\n**What it actually is: a feedforward (bypass) path around the CK switch and Inv1**\n\n- **CK high:** Both inverters see the same input and drive the same output. The red inverter just adds drive, and the signal reaches Inv1's output without the switch's RC delay.\n- **CK low:** Inv1 holds the old value, but the red inverter keeps passing the current output to Inv1's output node. With the CK-bar switch closed, the red inverter and the two right-hand inverters form a three-inverter ring. That is negative feedback, a ring oscillator rather than a latch.\n- **Consequence:** Once the divider output toggles, the red inverter fights Inv1, which is the opposite of what a keeper does. If it is weak, it degrades the level and burns static current. If it is strong, the ring runs freely while CK is low and the output toggles more than once per clock cycle.\n\nSo its plausible purpose is speed. The output no longer has to pass through the CK switch and Inv1, which shortens the loop delay and raises the self-oscillation frequency. That can help at the high-frequency end, where the divider behaves like an injection-locked ring oscillator. I am inferring this purpose from the schematic alone, not from the source text.\n\nAt the low-frequency end it makes things worse. The leakage limit remains, and a new limit appears: the CK-low phase must be shorter than the ring delay unless the red inverter is weak.\n\n**What the answer would need**\n\nTo get the behaviour the answer describes, flip the red inverter: a weak inverter from Inv1's output back to Inv1's input. The second stage would need the same, since its input node is also dynamic.",
        "format": "markdown",
        "sha256": "220d9dfbb3fb66c62bacef8565f7c5d54a6259206bd3cf6f4c339ae237d26c13"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly rejects the keeper interpretation, identifies the red inverter as a feedforward bypass that can speed high-frequency operation, and explains that its unclocked loop can dominate at low rates and raise the minimum usable clock frequency. The additional ring-delay detail is a minor elaboration, not a change to the central conclusion.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1307,
        "output_tokens": 29678,
        "total_tokens": 30985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1307,
        "output_tokens": 29678,
        "total_tokens": 30985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** Don't get the 50 Ω from 1/(g_m1+g_m2). Use the finite output resistance of the inverter so that the feedback loop sets R_in, then make g_m1+g_m2 much larger than 20 mS and raise R_F to bring R_in back to 50 Ω.\n\n**1. What limits the NF**\n\nFor small signals, M1 and M2 act as one device with G_m = g_m1 + g_m2 and r_o = r_O1‖r_O2. C1 is only a DC block, since the inverter self-biases through R_F.\n\nFor a source resistance R_S, and assuming the same γ for both devices, the noise figure is\n\nNF = 1 + (R_F/R_S)·[(1+G_mR_S)/(G_mR_F−1)]² + γ·G_mR_S·[(1+R_F/R_S)/(G_mR_F−1)]²\n\nFor R_F ≫ R_S this simplifies to\n\nNF ≈ 1 + γ/(G_mR_S) + (R_S/R_F)·(1 + 1/(G_mR_S))²\n\nThis expression does not depend on r_o, because r_o is a noiseless load on the output and scales signal and noise equally. Both terms fall monotonically as G_m and R_F increase.\n\nIf channel-length modulation is neglected, R_in = 1/G_m. Then R_in = 50 Ω pins G_m at 20 mS, and NF ≈ 1 + γ + 4R_S/R_F. The only knob is R_F, and the NF cannot go below 1 + γ (about 3 dB for γ ≈ 1).\n\n**2. The way out**\n\nWith finite r_o, the input resistance is\n\nR_in = (R_F + r_o)/(1 + G_m r_o)\n\nSo R_in = R_S can be met for any G_m > 1/R_S by choosing\n\nR_F = R_S + (G_mR_S − 1)·r_o\n\nG_m and R_F are raised together. The transistor noise term drops from γ to about γ/(G_mR_S), and the R_F term also shrinks. The matched gain is V_out/V_s = ½(1 − R_F/R_S), so it rises as well.\n\n**3. Design procedure**\n\n1. Spend the bias current on G_m. The two devices share the same current and their transconductances add, so size both wide, with low overdrive, for G_m of several times 20 mS.\n2. Find r_o at that bias, including any resistive loading from the next stage.\n3. Set R_F = R_S + (G_mR_S − 1)·r_o.\n\n**Example:** Take G_m = 100 mS and r_o = 200 Ω. Then R_F = 850 Ω and R_in = 1050/21 = 50 Ω. The gain is −8 (18 dB). NF = 1 + 0.087 + 0.23γ, which is about 1.2 dB for γ = 1. The G_m = 20 mS design with the same R_F gives about 4 dB.\n\n**4. Limits**\n\n- Since R_F < (1 + G_m r_o)·R_S, the NF cannot go below about 1 + 1/(1 + G_m r_o), so a reasonable intrinsic gain helps.\n- Wider devices cost power and add input capacitance (C_GS plus Miller-multiplied C_GD), which degrades the match and the NF at high frequencies.",
        "format": "markdown",
        "sha256": "4df481f8c828c3a1f8cd8517bf8e9cadf918e1c743ce4b511e6c31b490341257"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It uses the finite-output-resistance match relation, solves for RF to keep Rin at 50 Ω, and correctly explains that gm can exceed 1/Rs so NF can fall below 1 + γ.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2689,
        "output_tokens": 29987,
        "total_tokens": 32676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28878,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2689,
        "output_tokens": 29987,
        "total_tokens": 32676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28878,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** make g_m1 + g_m2 considerably larger than 1/(50 Ω), as large as the power budget allows, and then choose R_F so that, together with the finite output resistance of the transistors, R_in comes back to 50 Ω. The noise figure then falls with bias current.\n\nBelow, G_m = g_m1 + g_m2 and r_O = r_O1 ∥ r_O2. C_1 is a short at the signal frequency, and R_F carries no dc current, so it can be large without a headroom penalty. These results are my own small-signal derivation, assuming the same γ for both transistors and ignoring capacitances.\n\n**Relations**\n\n- Input resistance: R_in = (R_F + r_O) / (1 + G_m·r_O)\n- Noise figure (r_O is noiseless and only shunts the output, so it does not appear):\n\n  NF = 1 + (R_F/R_S)·(1 + G_m R_S)² / (G_m R_F − 1)² + γ·G_m·(R_S + R_F)² / [R_S·(G_m R_F − 1)²]\n\n  For G_m R_F ≫ 1 and R_F ≫ R_S this simplifies to\n\n  NF ≈ 1 + γ/(G_m R_S) + (R_S/R_F)·(1 + 1/(G_m R_S))²\n\n**Case 1: no channel-length modulation (r_O → ∞)**\n\nHere R_in = 1/G_m, so matching forces G_m = 1/R_S = 20 mS regardless of R_F. Then\n\nNF ≈ 1 + γ + 4R_S/R_F\n\nThe only freedom is to make R_F as large as the bandwidth allows. The noise figure cannot go below 1 + γ, about 3 dB for γ ≈ 1.\n\n**Case 2: finite r_O (the real circuit)**\n\nSetting R_in = R_S gives\n\nR_F = R_S(1 + G_m r_O) − r_O = R_S + r_O(G_m R_S − 1)\n\nSo G_m is no longer tied to 1/R_S. Any G_m > 1/R_S can be matched by the right R_F. Raising G_m helps in two ways:\n\n- The transistor term γ/(G_m R_S) drops.\n- The required R_F grows toward (1 + A_0)·R_S, where A_0 = G_m r_O is the inverter's intrinsic gain, so the R_F term falls toward 1/(1 + A_0).\n\nThe noise figure therefore decreases monotonically with G_m and approaches 1 + 1/(1 + A_0).\n\n**Example (γ = 1, A_0 = 8, R_S = 50 Ω)**\n\n| G_m | r_O | R_F for 50 Ω match | NF |\n|---|---|---|---|\n| 80 mS | 100 Ω | 350 Ω | ≈ 1.59 (2.0 dB) |\n| 160 mS | 50 Ω | 400 Ω | ≈ 1.33 (1.2 dB) |\n\nBoth beat the 3 dB floor of Case 1. Note that with finite r_O, a G_m only slightly above 1/R_S is a poor choice: at G_m = 40 mS the same formula gives about 3.9 dB, and at G_m = 1/R_S the gain is zero.\n\n**Design recipe**\n\n1. Get the most G_m per milliamp. The NMOS and PMOS share the same bias current and their transconductances add, so run both at low overdrive (wide devices), limited by the input capacitance, which degrades the match at high frequency.\n2. Use a channel length that gives a reasonable A_0, since a higher A_0 allows a larger R_F. This costs speed.\n3. Set R_F = R_S(1 + G_m r_O) − r_O to restore R_in = 50 Ω.\n\nThe price is power dissipation and larger device capacitances. The voltage gain from the source is about −(A_0/2)(1 − 1/(G_m R_S)).",
        "format": "markdown",
        "sha256": "00ca9744cd05fb04abd42f7404022cde0605cb12ced4f62956ab7611e7081d58"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Uses the finite-output-resistance input-match relation, shows that gm can exceed 1/Rs with RF adjusted to preserve the 50 Ω match, and correctly concludes that NF can fall below 1+γ as gm increases. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2689,
        "output_tokens": 17726,
        "total_tokens": 20415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16404,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2689,
        "output_tokens": 17726,
        "total_tokens": 20415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16404,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** make M1 and M2 much wider so that g_m1 + g_m2 is well above 1/(50 Ω) = 20 mS, and then raise R_F until R_in returns to 50 Ω. This works only because the transistors have finite output resistance; to first order, R_in fixes the transconductance and the NF cannot go below about 1 + γ.\n\nI use g_m = g_m1 + g_m2, r_o = r_o1 || r_o2, R_S = 50 Ω, and treat C_1 as a short. For small signals the two transistors act as one device.\n\n**1. First-order view (no channel-length modulation)**\n\n- R_in = 1/g_m, so matching forces g_m = 20 mS.\n- NF ≈ 1 + γ + 4R_S/R_F.\n\nThe only free parameter is R_F, so you make it as large as bandwidth allows. The NF is still stuck above 1 + γ, roughly 3 dB or more. How g_m is split between M1 and M2 does not affect the noise.\n\n**2. With finite r_o there is a second degree of freedom**\n\nDeriving the input resistance and noise figure with r_o included gives:\n\n- R_in = (R_F + r_o) / (1 + g_m·r_o)\n- NF = 1 + (R_F/R_S)·[(1 + g_m·R_S)/(g_m·R_F − 1)]² + (γ·g_m/R_S)·[(R_F + R_S)/(g_m·R_F − 1)]²\n\nFor g_m·R_F ≫ 1 and R_F ≫ R_S, this simplifies to:\n\nNF ≈ 1 + γ/(g_m·R_S) + (R_S/R_F)·(1 + 1/(g_m·R_S))²\n\nThe NF does not depend on r_o directly, because r_o is noiseless and scales signal and noise equally. But r_o changes the matching condition to:\n\nR_F = R_S·(1 + g_m·r_o) − r_o\n\nSo g_m no longer has to equal 1/R_S. The procedure is:\n\n1. Widen M1 and M2 (more bias current) to raise g_m. This reduces the transistor noise term from γ to about γ/(g_m·R_S).\n2. Set R_F from the matching condition above. R_F grows with g_m, toward R_S·(1 + g_m·r_o), so its noise term also falls.\n\nSince g_m·r_o stays roughly constant as the devices are widened, the NF approaches 1 + 1/(1 + g_m·r_o) in the limit of large g_m.\n\n**Example (g_m·r_o = 10, γ = 1)**\n\n| g_m1 + g_m2 | r_o | R_F for R_in = 50 Ω | NF |\n|---|---|---|---|\n| 40 mS | 250 Ω | 300 Ω | 3.5 dB |\n| 100 mS | 100 Ω | 450 Ω | 1.5 dB |\n| 200 mS | 50 Ω | 500 Ω | 1.0 dB |\n\nThe limit for this intrinsic gain is about 0.4 dB.\n\n**Trade-offs**\n\n- **Power:** the stage is self-biased from V_DD, so higher g_m means wider devices and more current.\n- **Bandwidth:** wider devices add input and output capacitance, which degrades the match and NF at high frequency.\n- **Sensitivity:** the match now depends on r_o, so it varies more with process, voltage and temperature.",
        "format": "markdown",
        "sha256": "276938ea1cfc357f3af516dc7b4f48728d5003740762650a78fd90adbc268038"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly uses the finite-output-resistance match relation, explains that gm can exceed 1/Rs while RF is adjusted to hold Rin at 50 Ω, and shows how the NF can fall below 1 + γ. The first-order limitation is explicitly qualified as the no-channel-length-modulation case.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2689,
        "output_tokens": 24229,
        "total_tokens": 26918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2689,
        "output_tokens": 24229,
        "total_tokens": 26918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result** (assuming λ = γ = 0, low frequency, and g_m2 = g_m3):\n\n$$R_{in}=\\frac{R_F+R_{D2}}{1+\\dfrac{g_{m1}g_{m2}R_{D1}R_{D2}}{2}}$$\n\nR_in is taken looking to the right of C_in, so C_in simply appears in parallel with it.\n\n**Derivation**\n\nApply a test voltage V_P at node P and find the current drawn. The gate of M1 draws no current, so all of the input current flows through R_F.\n\n1. Common-source stage: the gate of M2 draws no current, so \n V_X = −g_m1 R_D1 V_P.\n\n2. Differential pair: with the gate of M3 at ac ground and an ideal tail source, the small-signal current M3 delivers to the output node is \n i_3 = [g_m2 g_m3/(g_m2 + g_m3)] V_X = (g_m2/2) V_X = −(g_m2/2) g_m1 R_D1 V_P.\n\n3. KCL at the output node: \n V_out/R_D2 + (V_out − V_P)/R_F = i_3 \n so V_out = (R_D2‖R_F) [1/R_F − g_m1 g_m2 R_D1/2] V_P.\n\n4. Input current: \n I_in = (V_P − V_out)/R_F = V_P [1 + g_m1 g_m2 R_D1 R_D2/2] / (R_F + R_D2).\n\nDividing V_P by I_in gives the result above.\n\n**Check with Blackman's theorem** (taking g_m1 as the controlled source):\n\n- With g_m1 = 0, the impedance seen at P is R_F + R_D2.\n- With P shorted to ground, V_GS1 = 0, so T_sc = 0.\n- With P open, no current flows through R_F, so V_P = V_out and T_oc = g_m1 R_D1 · (g_m2/2) · R_D2.\n\nThen R_in = (R_F + R_D2)(1 + T_sc)/(1 + T_oc), which is the same expression.\n\n**Remarks**\n\n- If the pair is not matched, replace g_m2/2 with g_m2 g_m3/(g_m2 + g_m3).\n- The feedback is negative: V_P up → V_X down → M3 current down → V_out down, which pulls P back down through R_F.\n- For R_F ≫ R_D2, this agrees with the usual shunt-shunt approximation R_F / [1 + g_m1 R_D1 (g_m2/2)(R_D2‖R_F)].",
        "format": "markdown",
        "sha256": "caa8b7f10280ce812017f4aa7a22d1840d7edd3afe4d4635aab415c965df6fae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The result matches the exact input resistance, with the denominator corresponding to 1 + A0 for the stated matched-pair assumption. The derivation also accounts for RD2 in the feedback path.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 7541,
        "total_tokens": 7768,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6666,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 7541,
        "total_tokens": 7768,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6666,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result** (taking λ = γ = 0, an ideal tail source I_SS, and R_in defined as in the figure, looking into node P to the right of C_in):\n\n$$R_{in}=\\frac{R_F+R_{D2}}{1+g_{m1}R_{D1}\\,G_m\\,R_{D2}},\\qquad G_m=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}$$\n\nFor matched M2 and M3, G_m = g_m2/2, so\n\n$$R_{in}=\\frac{R_F+R_{D2}}{1+\\tfrac{1}{2}\\,g_{m1}g_{m2}R_{D1}R_{D2}}$$\n\n**Derivation**\n\n1. M1 is a common-source stage: v_X = −g_m1 R_D1 v_P.\n\n2. M2 and M3 form a PMOS differential pair with the gate of M3 at ac ground. When v_X rises, M2 carries less current and M3 carries more, so the current M3 delivers to the output node is i_D3 = +G_m v_X, with G_m as defined above.\n\n3. Apply a test current i_in into P. The gate of M1 draws no current, so all of i_in flows through R_F into the output node. KCL at the output gives\n\n v_out = (i_in + G_m v_X) R_D2 = (i_in − G_m g_m1 R_D1 v_P) R_D2.\n\n4. The voltage at P is v_P = v_out + i_in R_F. Substituting step 3:\n\n v_P (1 + g_m1 R_D1 G_m R_D2) = i_in (R_F + R_D2),\n\n which gives the result above.\n\n**Check and interpretation**\n\n- Blackman's theorem gives the same answer: with the gain disabled the resistance is R_F + R_D2, the loop gain with P shorted is 0, and the loop gain with P open is g_m1 R_D1 G_m R_D2.\n- The feedback is negative (shunt feedback at the input), so the open-loop resistance R_F + R_D2 is divided by one plus the loop gain.\n- For large loop gain, R_in ≈ 2(R_F + R_D2)/(g_m1 g_m2 R_D1 R_D2).\n- If C_in is included, the total impedance seen by I_in is R_in ∥ 1/(C_in s), giving an input pole at 1/(R_in C_in).",
        "format": "markdown",
        "sha256": "1935f69597598f62f14f3ba7cf8892512b9c1bd7f5748d25f31e5174618636dc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer gives the exact input-resistance form, including the output resistance in the numerator, and its matched-pair denominator is equivalent to the golden unloaded gain. The small-signal derivation and feedback sign are consistent with the stated model.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 8711,
        "total_tokens": 8938,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7906,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 8711,
        "total_tokens": 8938,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7906,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result** (low frequency, λ = γ = 0, ideal I_SS, g_m2 = g_m3):\n\n$$R_{in}=\\frac{R_F+R_{D2}}{1+\\dfrac{g_{m1}g_{m2}}{2}\\,R_{D1}R_{D2}}$$\n\nThis is the resistance looking into node P to the right of C_in, as the arrow in the figure indicates.\n\n**Derivation**\n\nApply a test current I_X into node P and find V_P.\n\n1. M1 is a common-source stage: V_X = −g_m1 R_D1 V_P.\n\n2. The PMOS pair M2–M3 has its other input (V_b) at AC ground, so M3 delivers a current into the output node of\n\n i_3 = [g_m2 g_m3/(g_m2+g_m3)] V_X = (g_m2/2) V_X = −(g_m1 g_m2/2) R_D1 V_P.\n\n3. The gate of M1 draws no current, so all of I_X flows through R_F: V_out = V_P − I_X R_F.\n\n4. KCL at the output node: i_3 + I_X = V_out/R_D2, so\n\n V_out = R_D2 [I_X − (g_m1 g_m2/2) R_D1 V_P].\n\n5. Combining steps 3 and 4:\n\n V_P [1 + (g_m1 g_m2/2) R_D1 R_D2] = I_X (R_F + R_D2),\n\n which gives the result above.\n\n**Check with Blackman's theorem**\n\nTake M1 as the transistor of interest.\n\n- With g_m1 = 0, the impedance seen at P is R_F + R_D2.\n- With the port shorted, V_P = 0, so T_sc = 0.\n- With the port open, no current flows in R_F, so V_P = V_out and T_oc = g_m1 R_D1 (g_m2/2) R_D2.\n\nThen R_in = (R_F + R_D2)(1 + T_sc)/(1 + T_oc), the same expression.\n\n**Notes**\n\n- If M2 and M3 are not matched, replace g_m2/2 by g_m2 g_m3/(g_m2 + g_m3).\n- For large loop gain, R_in ≈ 2(1 + R_F/R_D2)/(g_m1 g_m2 R_D1).\n- The usual loaded two-port feedback approximation gives R_F/[1 + g_m1 R_D1 (g_m2/2)(R_F‖R_D2)], which agrees with the exact result when the loop gain is large.\n- The total impedance seen by I_in includes C_in in parallel: Z_in = R_in ‖ 1/(C_in s), giving an input pole at ω = 1/(R_in C_in).",
        "format": "markdown",
        "sha256": "769ea03e89a0152c008a8b3c9f9e1830d617b74ff14f4aca44a19c5ebe234b7c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact input resistance, including the output-side resistance: (R_F+R_D2)/(1+A_0), with A_0=½g_m1g_m2R_D1R_D2 for the stated matched-device case.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 13570,
        "total_tokens": 13797,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12658,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 13570,
        "total_tokens": 13797,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12658,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** the LDO noise modulates the varactors just as the control voltage does, so the supply-to-frequency gain is about K_VCO, and the phase noise is\n\n$$S_{\\phi n}(f)=S_{th}\\,\\frac{K_{VCO}^2}{\\omega^2}=S_{th}\\,\\frac{K_{VCO}^2}{4\\pi^2 f^2}$$\n\nwhere f is the offset frequency and K_VCO is in rad/s/V.\n\n**Step 1 – Supply sensitivity.** The inductors drop no DC voltage, so the common-mode level at X and Y equals V_out. The varactor gates sit at V_out and their source/drain/well terminals at V_cont, so each varactor sees V_out − V_cont. A disturbance on V_out therefore changes the varactor capacitance exactly as an equal and opposite disturbance on V_cont would:\n\n$$K_{VDD}=\\frac{\\partial \\omega_{out}}{\\partial V_{out}}\\approx -K_{VCO}$$\n\nOnly the magnitude matters for noise. This neglects smaller contributions such as the voltage-dependent junction capacitances at X and Y.\n\n**Step 2 – Frequency to phase.** The LDO noise v_n(t) shifts the frequency by K_VCO·v_n(t), and phase is the integral of frequency:\n\n$$\\phi_n(t)=K_{VCO}\\int v_n(t)\\,dt \\quad\\Rightarrow\\quad \\left|\\frac{\\phi_n}{V_n}(j\\omega)\\right|=\\frac{K_{VCO}}{\\omega}$$\n\nMultiplying the noise spectrum by the squared magnitude of this transfer function gives the formula above. If K_VCO is expressed in Hz/V, it simplifies to S_th·K_VCO²/f².\n\n**Remarks**\n\n- White LDO noise produces phase noise falling at 20 dB/decade (1/f²), which adds directly to the VCO's own phase noise. LDO flicker noise would produce a 1/f³ region.\n- Example: with K_VCO = 2π × 100 MHz/V and LDO noise of 10 nV/√Hz (S_th = 10⁻¹⁶ V²/Hz), the phase noise at 1 MHz offset is 10⁻¹⁶ × (100)² = 10⁻¹², or about −120 dBc/Hz. This is comparable to or worse than the intrinsic phase noise of many LC VCOs, so the LDO must have very low noise or the VCO a small K_VCO.\n- The formula assumes S_th and S_φn use the same convention (both two-sided or both one-sided). If S_th is one-sided (e.g., of the 4kTR form), the phase noise in dBc/Hz is half the value above, i.e. 3 dB lower.",
        "format": "markdown",
        "sha256": "4484edac3bff3f1bb1852367e6b9ef79c38caa741aa78783032c83f06e01bf54"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing through the varactors, relates the sensitivity to KVCO, and converts the LDO voltage-noise spectrum to phase noise with the expected 1/offset-frequency-squared dependence. Any factor-of-two or spectrum-convention differences are secondary.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3734,
        "output_tokens": 4763,
        "total_tokens": 8497,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3813,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3734,
        "output_tokens": 4763,
        "total_tokens": 8497,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3813,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** the LDO noise frequency-modulates the VCO with a gain equal to K_VCO, so the output phase noise is\n\n$$S_{\\phi n}(f)=\\frac{K_{VCO}^{2}}{(2\\pi f)^{2}}\\,S_{th}$$\n\nwhere f is the offset frequency and K_VCO is in rad/s/V.\n\n**Step 1 – Find the supply sensitivity.**\nThe inductors are short circuits at low frequencies, so the common-mode (average) level at X and Y equals V_out. The varactors M_v1 and M_v2 have their gates at X and Y and their source/drain/well at V_cont. The average voltage across each varactor is therefore V_out − V_cont.\n\nA change in V_out thus changes the varactor capacitance exactly as an opposite change in V_cont would. The gain from the supply to the output frequency is\n\n$$|K_{VDD}| = \\left|\\frac{\\partial \\omega_{out}}{\\partial V_{out}}\\right| = K_{VCO}$$\n\nOther paths, such as the junction capacitances of M1 and M2, add a little, but the varactor path dominates.\n\n**Step 2 – Convert voltage noise to phase noise.**\nWith LDO noise v_n(t) on V_out, the output is\n\n$$V_{XY}(t)=V_0\\cos\\Big[\\omega_0 t+K_{VCO}\\int v_n(t)\\,dt\\Big]$$\n\nThe excess phase is φ_n(t) = K_VCO ∫ v_n dt. Integration in time corresponds to division by jω in frequency, which gives the formula above.\n\n**Notes**\n\n- **Spectrum convention:** the formula gives the phase noise in dBc/Hz directly if S_th is a two-sided spectrum. If S_th is a one-sided density in V²/Hz, as a noise simulation typically reports, divide by 2. To see this, model the noise in 1 Hz as a tone of peak amplitude √(2S_th); narrowband FM gives sidebands of relative power (K_VCO√(2S_th)/2ω)² = K_VCO²S_th/(2ω²).\n\n- **Which frequency:** S_th is evaluated at the offset frequency f (low-frequency noise on V_out), not near the carrier. White LDO noise therefore produces a 1/f² phase noise profile, and LDO flicker noise produces 1/f³.\n\n- **Illustrative numbers:** take K_VCO = 2π(100 MHz/V) and LDO noise of 10 nV/√Hz. At 1 MHz offset, K_VCO/(2πf) = 100, so S_φn = 100² × 10⁻¹⁶ = 10⁻¹², or −120 dBc/Hz (−123 dBc/Hz if the 10 nV/√Hz is a one-sided density). This is comparable to the intrinsic phase noise of many LC VCOs, which is why the LDO noise must be very low when it supplies this kind of oscillator.",
        "format": "markdown",
        "sha256": "b9d490d642d05a01f2a7e0071464103c287f0d0194175ad6235a83e60fb2dcd5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, relates the supply-to-frequency sensitivity to the varactor-controlled KVCO, and converts voltage-noise PSD to phase noise with the expected 1/offset-frequency² dependence. Spectrum-convention details are secondary under the golden solution.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3734,
        "output_tokens": 7263,
        "total_tokens": 10997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6261,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3734,
        "output_tokens": 7263,
        "total_tokens": 10997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6261,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** the LDO noise modulates the varactor voltage exactly as noise on V_cont would, so it is converted to phase noise through the VCO gain:\n\nS_φn(f) = S_th · (K_VCO / 2πf)²\n\nwhere K_VCO is in rad/s/V and f is the offset frequency.\n\n**Why the supply gain equals K_VCO**\n\n- At the noise frequencies of interest (offsets of kHz to tens of MHz), the inductors L₁ are short circuits, so the common-mode level of X and Y equals V_out.\n- The varactor gates are tied to X and Y, and their source/drain/well terminals are tied to V_cont. The voltage across each varactor is therefore V_out − V_cont.\n- A change in V_out thus has the same effect on the tank capacitance as an equal and opposite change in V_cont. The sensitivity of the oscillation frequency to the supply, K_VDD = ∂ω_out/∂V_out, is approximately K_VCO in magnitude.\n\n**From supply noise to phase noise**\n\n1. The noise voltage v_n(t) on V_out frequency-modulates the oscillator: ω_out(t) = ω₀ + K_VCO·v_n(t).\n2. Phase is the integral of frequency, so the output is V₀cos[ω₀t + K_VCO∫v_n dt], and the excess phase is φ_n(t) = K_VCO∫v_n dt.\n3. In the frequency domain, Φ_n(jω) = (K_VCO/jω)·V_n(jω), which gives the spectrum above: S_φn(f) = S_th·K_VCO²/ω².\n\nSo white LDO noise produces phase noise that falls as 1/f² (−20 dB/dec), just like the VCO's own thermal-noise-induced phase noise. Flicker noise from the LDO would produce a 1/f³ region.\n\n**Practical notes**\n\n- **Spectrum convention:** if S_th is two-sided, the formula directly gives the phase noise relative to the carrier, L(f). If S_th is one-sided (4kTR-type), L(f) is half of that, i.e. S_th·K_VCO²/(2ω²).\n- **Example (values assumed for illustration):** with K_VCO = 2π × 100 MHz/V and one-sided LDO noise of 10 nV/√Hz, at 1 MHz offset S_φn = 10⁻¹⁶ × (100)² = 10⁻¹² rad²/Hz, or −120 dBc/Hz, so L ≈ −123 dBc/Hz. This is comparable to the intrinsic phase noise of a good LC VCO, so the LDO noise can easily dominate.\n- **Other contributions:** in the real circuit, other voltage-dependent capacitances at X and Y (drain junctions of M₁ and M₂, off-switch junctions in the capacitor banks B₁ and B₂) add to the supply sensitivity. In practice you simulate K_VDD = Δω_out/ΔV_out and use it in place of K_VCO.\n- **Remedies:** lower the LDO noise, filter its output, or reduce K_VCO, which is one reason coarse tuning is done with the switched-capacitor banks rather than the varactors.",
        "format": "markdown",
        "sha256": "9f864ec8e697d710357fca725c588a258b247476fae122f0f9939230701c2745"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, converts LDO voltage noise through the VCO’s supply sensitivity into phase noise with a 1/offset-frequency-squared dependence, and explains why the sensitivity is closely related to KVCO through the varactors. The spectral-convention factor is secondary under the golden solution.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3734,
        "output_tokens": 6417,
        "total_tokens": 10151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3734,
        "output_tokens": 6417,
        "total_tokens": 10151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise gets worse, even though I_SS itself is ideal and noiseless.**\n\n**Without C_T.** Node P sees an infinite impedance. When the pair is fully switched (say V_X high, V_Y low, so M1 is off and M2 is on), M2 is in series with an ideal current source. Two things follow:\n\n- M2's drain current is forced to equal I_SS, so its channel noise cannot reach the tank. The pair injects noise only near the zero crossings, when both transistors are on.\n- Even if M2 enters the triode region (V_X − V_Y > V_TH), its on-resistance is in series with an open circuit, so it does not load the tank. Node P simply moves up and down at 2ω0 to keep the current equal to I_SS.\n\n**With C_T.** Node P is now close to ac ground at ω0 and 2ω0, which removes both protections:\n\n1. **Tank Q degradation.** When M2 (or M1) enters the triode region near the peaks of the swing, R_on in series with C_T forms a lossy path from the tank to ground for part of each period. Because P can no longer rise with the gate voltage, the transistor is also driven deeper into triode and draws large current spikes from C_T. The effective Q and the swing both drop.\n\n2. **Longer noise injection.** The \"on\" transistor is no longer degenerated by a high impedance. A fraction sC_T/(g_m + sC_T) of its noise current now flows through C_T and the tank for the whole half-cycle it conducts, not just around the zero crossings.\n\nBoth effects raise the phase noise.\n\n**Caveat.** If the swing is small enough that M1 and M2 stay in saturation, the Q penalty is small. With a real, noisy tail transistor, C_T would also help by shunting tail noise around 2ω0, which otherwise gets converted to phase noise. So in practice there is a trade-off. The usual way around it is a tail noise filter: a large capacitor across the current source plus a series inductor that resonates with the capacitance at P at 2ω0, so that P still sees a high impedance.",
        "format": "markdown",
        "sha256": "341a856930d8ab05fdeede90b52dd960d7b444d93c6445d6e4f578fcf746cfe7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies triode-related loading as a possible degradation, but concludes phase noise worsens monotonically and misses the class-C regime where peak tank currents can exceed I_SS and improve phase noise, as well as the overall nonmonotonic effect.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3856,
        "output_tokens": 8344,
        "total_tokens": 12200,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7659,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3856,
        "output_tokens": 8344,
        "total_tokens": 12200,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7659,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise gets worse**, at least for the usual large-swing case where M1 and M2 are driven into the triode region for part of each cycle.\n\n**Without C_T.** When the pair is fully switched (say M1 on, M2 off), M1 is in series with an ideal current source and node P floats. Two things follow:\n\n- Even if M1 is in deep triode, its on-resistance has no path to ground, so it cannot load the tank and the tank Q is preserved.\n- M1 must carry exactly I_SS, so its noise current cannot flow. The pair injects noise only briefly around the zero crossings, when both devices are on.\n\n**With C_T.** Node P now has a low-impedance path to ground at ω0 and 2ω0, and both of those benefits are lost:\n\n1. **Q degradation.** When V_X falls and V_Y rises, M1 enters deep triode and connects X to ground through R_on1 in series with C_T (and likewise M2 on the other half cycle). The tank is periodically shunted by this lossy branch, whose equivalent parallel resistance is R_on[1 + 1/(R_on·C_T·ω0)²], approaching R_on for large C_T. The effective Q drops, and since phase noise scales as 1/Q², it rises.\n\n2. **More noise injection from M1 and M2.** The \"on\" transistor is no longer degenerated by a high impedance, so its noise current returns through C_T and flows into the tank for much of the period, not just at the zero crossings.\n\n3. **Flicker-noise upconversion.** The 2ω0 ripple at P now drives current through C_T, and the drain currents become rich in harmonics. The 1/f noise of M1 and M2 modulates these currents and hence the oscillation frequency, raising the close-in (1/f³) phase noise.\n\n**Caveats.** If the swing is kept small enough that M1 and M2 never enter the triode region, C_T does not degrade the Q, though the second and third effects are not removed. With a real, noisy tail source, C_T would help by shunting the tail noise around 2ω0, but with the ideal I_SS shown there is nothing to gain. The usual way to get that benefit without the Q penalty is to bypass the current source but insert an inductor between it and P that resonates with the capacitance at P at 2ω0, keeping the tail impedance high there.",
        "format": "markdown",
        "sha256": "48fe50136cc82b2ec869f9774d94f0b802638df032cf397560be626e8ff26ec4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies a genuine degradation mechanism—flicker-noise upconversion—but incorrectly concludes that adding CT worsens phase noise monotonically. It misses the class-C-like regime where peak tank current can exceed ISS and lower phase noise, so CT is an optimization variable with a nonmonotonic effect.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3856,
        "output_tokens": 11712,
        "total_tokens": 15568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10942,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3856,
        "output_tokens": 11712,
        "total_tokens": 15568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10942,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**In the usual large-swing case, the phase noise gets worse.** This is my reasoning from the circuit, not a quoted textbook answer.\n\n**Without C_T**\n\n- Node P is high-impedance and free to move, which it does at 2ω₀.\n- Near the peaks of the swing (say X high, Y low), M1 is off and M2 is in deep triode. M2's on-resistance is in series with an ideal current source, so the tank does not see it.\n- M2 still carries exactly I_SS, so the tank Q is not degraded. M2's noise is degenerated by the current source and cannot reach the tank.\n- The pair injects noise only briefly around the zero crossings.\n\n**With C_T**\n\n- P becomes roughly an AC ground at 2ω₀ and above. M1 and M2 now behave like grounded-source devices, and I_SS only sets the average current.\n- Each half cycle, once a transistor enters triode (V_X − V_Y > V_TH), its small R_on connects the tank to ground through C_T. The current is no longer limited to I_SS, and large pulses flow, including reverse current from C_T into the low side of the tank.\n- The tank is therefore resistively loaded for part of every period, so the effective Q drops.\n- The triode device injects its thermal noise (4kT/R_on) directly into the tank, and the devices carry more current and have higher g_m near the zero crossings, where the oscillator is most sensitive.\n- Flicker noise of M1 and M2 is also upconverted more. With an ideal tail it mostly shifts the switching instants. With C_T it modulates the 2ω₀ current in C_T, which is commutated back to ω₀ as frequency modulation, raising the 1/f³ noise.\n\nThe degradation grows with larger swings (more time in triode) and larger C_T.\n\n**Caveats**\n\n- If I_SS is a real, noisy transistor, C_T helps in one way: it shunts the tail noise around 2ω₀, which would otherwise be mixed down to ω₀ as phase noise.\n- If M1 and M2 never enter triode (peak differential swing below V_TH, or class-C-style gate biasing), C_T makes them conduct in narrow pulses. The fundamental current rises from (2/π)I_SS toward I_SS, which can improve phase noise by up to about 3.9 dB.\n- To filter the tail noise without the Q penalty, insert an inductor between P and the bypassed current source that resonates with the capacitance at P at 2ω₀ (a \"tail tank\" or noise filter). P then stays high-impedance at 2ω₀ while the current-source noise is still shorted.",
        "format": "markdown",
        "sha256": "5b639247524b47dcd0593931b003e7e4cdf73b9fea1dc2d0f2feee75e6adfb40"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It recognizes flicker-noise upconversion and a possible class-C-related improvement, so it captures competing effects. However, it emphasizes worsening and tank loading rather than the key improvement mechanism—class-C peak tank currents exceeding I_SS—and misses the large-C_T instability.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3856,
        "output_tokens": 18957,
        "total_tokens": 22813,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3856,
        "output_tokens": 18957,
        "total_tokens": 22813,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** the circuit is a quadrature LC oscillator, and it does not oscillate at the tank resonance ω₀ = 1/√(LC) but slightly off it:\n\nω_osc ≈ ω₀ ± (1/(2R_pC))·(I₁/I_SS) = ω₀ [1 ± I₁/(2Q·I_SS)]\n\nHere L, C and R_p are the inductance, total capacitance and equivalent parallel loss resistance at each of the nodes X and Y, and Q = R_p/(Lω₀) = R_pCω₀.\n\n**Reading the circuit:** each oscillator has a cross-coupled pair (tail I_SS, transconductance g_m) and a coupling pair (tail I₁, transconductance g_mc). Tracing the wires, the bottom coupling pair is driven directly by X₁ and Y₁, while the top coupling pair is driven by Y₂ and X₂ through the crossed wires. So one coupling is inverting and the other is not.\n\n**Derivation:** let Y_T = 1/R_p + jCω + 1/(jLω) be the tank admittance at each node. Using differential half-circuits:\n\n- Node X₁: V_X1·Y_T = g_m·V_X1 + g_mc·V_X2\n- Node X₂: V_X2·Y_T = g_m·V_X2 − g_mc·V_X1\n\nMultiplying the two gives (Y_T − g_m)² = −g_mc², so\n\nY_T = g_m ± j·g_mc, and V_X2 = ±j·V_X1 (quadrature outputs).\n\n- Real part: g_m = 1/R_p. This is the usual amplitude condition; the cross-coupled pair cancels the tank loss.\n- Imaginary part: Cω − 1/(Lω) = ± g_mc. Near resonance the left side is about 2C(ω − ω₀), so ω_osc ≈ ω₀ ± g_mc/(2C).\n\nIn steady state the effective transconductances scale with the tail currents, g_mc/g_m ≈ I₁/I_SS, and g_m ≈ 1/R_p, which gives the result above.\n\n**Physical picture:** each tank receives a current from its own cross-coupled pair (proportional to I_SS, in phase with its voltage) and a current from the coupling pair (proportional to I₁, 90° away). The total current is therefore tilted by φ = tan⁻¹(I₁/I_SS) relative to the tank voltage. The tank must supply this phase, and since its phase is about −tan⁻¹(2QΔω/ω₀), the frequency shifts by Δω ≈ ±(ω₀/2Q)(I₁/I_SS).\n\nFor example, with I₁ = I_SS/4 and Q = 10, the shift is about 1.25% of ω₀. In this ideal model both signs (above or below ω₀) are valid solutions.",
        "format": "markdown",
        "sha256": "3941b84f20f8b0b115046478d35ce2521de55a78ffc79f9453afb685393b19e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the tank resonance and the coupling-induced shift Δω ≈ (I₁/I_SS)ω₀/(2Q), with either sign. The intermediate g_mc/(2C) expression is tied to the stated gmR_p = 1 condition, so it does not undermine the estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2009,
        "output_tokens": 7087,
        "total_tokens": 9096,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2009,
        "output_tokens": 7087,
        "total_tokens": 9096,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** the circuit is a quadrature LC oscillator, and it oscillates slightly off the tank resonance:\n\n$$\\omega_{osc}\\;\\approx\\;\\omega_0\\left(1\\pm\\frac{1}{2Q}\\,\\frac{I_1}{I_{SS}}\\right),\\qquad \\omega_0=\\frac{1}{\\sqrt{LC}}$$\n\nHere C is the total capacitance at each of the nodes X and Y (not drawn in the figure), R_p is the equivalent parallel loss resistance of each tank, and Q = R_p/(Lω0) = R_pCω0.\n\n**Derivation**\n\n1. *Coupling.* Each oscillator has a cross-coupled pair (tail current I_SS, transconductance g_m) and a coupling pair (tail current I_1, transconductance g_mc) driven by the other oscillator. Tracing the wires, the bottom oscillator is driven in phase by the top one (X1 drives the device at X2), while the top is driven in anti-phase by the bottom one (Y2 drives the device at X1).\n\n2. *Small-signal equations.* With V_A = V_X1 − V_Y1, V_B = V_X2 − V_Y2 and tank admittance Y_T:\n\n (Y_T − g_m)V_A = +g_mc V_B\n\n (Y_T − g_m)V_B = −g_mc V_A\n\n Multiplying gives (Y_T − g_m)² = −g_mc², so Y_T = g_m ± j g_mc and V_B = ± jV_A. The two outputs are in quadrature.\n\n3. *Frequency.* Since Y_T = 1/R_p + j(Cω − 1/(Lω)), the real part gives g_m = 1/R_p and the imaginary part gives\n\n Cω − 1/(Lω) = ± g_mc.\n\n Near resonance, Cω − 1/(Lω) ≈ 2C(ω − ω0), so\n\n ω_osc ≈ ω0 ± g_mc/(2C) = ω0 ± (ω0/2Q)(g_mc/g_m).\n\n4. *Large-signal version.* With both pairs switching fully, the cross-coupled pair injects a current of fundamental amplitude (2/π)I_SS in phase with the tank voltage, and the coupling pair injects (2/π)I_1 at 90° to it. The total current is therefore at an angle tan⁻¹(I_1/I_SS) to the voltage, and the tank must supply that phase shift. For a parallel tank, tan(∠Z_T) ≈ −2Q(ω − ω0)/ω0, so\n\n 2Q(ω_osc − ω0)/ω0 = ± I_1/I_SS,\n\n which is the result above, with g_mc/g_m replaced by I_1/I_SS. Equivalently, Δω ≈ ±(1/(2R_pC))(I_1/I_SS).\n\n**Notes**\n\n- The ± sign reflects the two possible modes (+90° or −90° between the two oscillators). In this ideal model both satisfy the oscillation condition equally, so the analysis does not say which one the circuit picks.\n- As an example, with I_1/I_SS = 0.25 and Q = 10, the frequency is about 1.25% away from 1/(2π√(LC)).",
        "format": "markdown",
        "sha256": "8852962642069c228fa85f8773b2a61ce3cdd8983f9e623cc1af7158e0a683b7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the tank resonance and the correct coupling-induced shift, Δω ≈ (I₁/I_SS)ω₀/(2Q), with the equivalent small-signal form. The g_mc/(2C) step is explicitly tied to the edge condition g_mR_p = 1, so it does not replace the general result.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2009,
        "output_tokens": 8206,
        "total_tokens": 10215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7097,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2009,
        "output_tokens": 8206,
        "total_tokens": 10215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7097,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-fable-5.2",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** the circuit oscillates slightly away from the tank resonance, at approximately\n\n$$\\omega_{osc}\\approx\\omega_0\\left(1\\pm\\frac{1}{2Q}\\,\\frac{I_1}{I_{SS}}\\right)=\\frac{1}{\\sqrt{LC}}\\pm\\frac{1}{2R_pC}\\,\\frac{I_1}{I_{SS}}$$\n\nHere $C$ is the total capacitance at each of the nodes X and Y (none is drawn, so it is the device and load capacitance), $R_p$ is the equivalent parallel tank resistance, $\\omega_0=1/\\sqrt{LC}$ and $Q=R_p/(L\\omega_0)=R_pC\\omega_0$.\n\n**Why:** this is a quadrature LC oscillator. Tracing the wiring, the top oscillator's coupling pair is driven by the bottom one with one polarity (the device at X₁ is driven by Y₂), while the bottom oscillator's coupling pair is driven by the top one with the opposite polarity (the device at X₂ is driven by X₁). With one coupling in-phase and the other anti-phase, the two differential outputs must be 90° apart.\n\n**Derivation (small-signal, half-circuit):** let $Z_T = R_p \\,\\|\\, sL \\,\\|\\, 1/(sC)$, let $g_m$ be the transconductance of the cross-coupled devices and $g_{mc}$ that of the coupling devices. Then\n\n$$V_1(1-g_mZ_T)=+g_{mc}Z_TV_2,\\qquad V_2(1-g_mZ_T)=-g_{mc}Z_TV_1$$\n\nMultiplying the two gives $(1-g_mZ_T)^2=-(g_{mc}Z_T)^2$, so\n\n$$\\frac{1}{Z_T}=g_m\\pm jg_{mc},\\qquad V_2=\\pm jV_1$$\n\nSince $1/Z_T = 1/R_p + j(\\omega C - 1/(\\omega L))$, the real part gives the amplitude condition $g_m = 1/R_p$, and the imaginary part gives\n\n$$\\omega C-\\frac{1}{\\omega L}=\\pm g_{mc}\\quad\\Rightarrow\\quad \\Delta\\omega\\approx\\pm\\frac{g_{mc}}{2C}$$\n\n**In terms of the tail currents:** in steady state with full switching, each tank receives a current proportional to $I_{SS}$ in phase with its own voltage (from the cross-coupled pair) and a current proportional to $I_1$ in quadrature (from the coupling pair). The total current is therefore rotated by $\\tan^{-1}(I_1/I_{SS})$, and the tank must supply this phase shift:\n\n$$Q\\left(\\frac{\\omega}{\\omega_0}-\\frac{\\omega_0}{\\omega}\\right)=\\pm\\frac{I_1}{I_{SS}}$$\n\nNear resonance the left side is about $2Q\\,\\Delta\\omega/\\omega_0$, which gives the result above. This is the same as the small-signal answer with $g_{mc}/g_m$ replaced by $I_1/I_{SS}$.\n\n**Notes:**\n- If $I_1 = I_{SS}$, each tank runs 45° off resonance, at about $\\omega_0(1\\pm 1/2Q)$, the edge of its −3 dB bandwidth.\n- The simple model allows both signs (two modes). From my recollection of the literature, the mode above $\\omega_0$ usually prevails in practice, but the analysis here does not determine that.",
        "format": "markdown",
        "sha256": "7b9b717732aad315a6521f1e80568a28a77a80d7564bf1d0d18fd85e0e139783"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the correct tank resonance and coupling-induced shift, including the large-signal I1/ISS form. The gmc/(2C) small-signal result is explicitly derived under gmRp = 1, the edge-of-oscillation condition, as the golden solution allows.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2009,
        "output_tokens": 14788,
        "total_tokens": 16797,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2009,
        "output_tokens": 14788,
        "total_tokens": 16797,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    }
  ]
}
