{
  "model_key": "claude_opus_5",
  "display_name": "Claude Opus 5",
  "provider": "anthropic",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "Claude Opus 5 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (anthropic/claude-opus-5) at maximum reasoning effort. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Claude Opus 5 on 2026-11-10 ($5.00 input, $0.50 cached input, $25.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 132,
          "incorrect_count": 18,
          "partial_credit_count": 17,
          "zero_count": 1,
          "mean_score_0_to_4": 3.76,
          "score_percent": 94.0,
          "score_distribution": {
            "0": 1,
            "1": 3,
            "2": 9,
            "3": 5,
            "4": 132
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 132,
          "incorrect_count": 18,
          "partial_credit_count": 17,
          "zero_count": 1,
          "mean_score_0_to_4": 3.76,
          "score_percent": 94.0,
          "score_distribution": {
            "0": 1,
            "1": 3,
            "2": 9,
            "3": 5,
            "4": 132
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 86,
          "incorrect_count": 4,
          "partial_credit_count": 3,
          "zero_count": 1,
          "mean_score_0_to_4": 3.9,
          "score_percent": 97.5,
          "score_distribution": {
            "0": 1,
            "2": 2,
            "3": 1,
            "4": 86
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 86,
          "incorrect_count": 4,
          "partial_credit_count": 3,
          "zero_count": 1,
          "mean_score_0_to_4": 3.9,
          "score_percent": 97.5,
          "score_distribution": {
            "0": 1,
            "2": 2,
            "3": 1,
            "4": 86
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 46,
          "incorrect_count": 14,
          "partial_credit_count": 14,
          "zero_count": 0,
          "mean_score_0_to_4": 3.55,
          "score_percent": 88.75,
          "score_distribution": {
            "1": 3,
            "2": 7,
            "3": 4,
            "4": 46
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 46,
          "incorrect_count": 14,
          "partial_credit_count": 14,
          "zero_count": 0,
          "mean_score_0_to_4": 3.55,
          "score_percent": 88.75,
          "score_distribution": {
            "1": 3,
            "2": 7,
            "3": 4,
            "4": 46
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 45,
        "incorrect_count": 5,
        "partial_credit_count": 4,
        "zero_count": 1,
        "mean_score_0_to_4": 3.78,
        "score_percent": 94.5,
        "score_distribution": {
          "0": 1,
          "2": 3,
          "3": 1,
          "4": 45
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 43,
        "incorrect_count": 7,
        "partial_credit_count": 7,
        "zero_count": 0,
        "mean_score_0_to_4": 3.7,
        "score_percent": 92.5,
        "score_distribution": {
          "1": 2,
          "2": 4,
          "3": 1,
          "4": 43
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 44,
        "incorrect_count": 6,
        "partial_credit_count": 6,
        "zero_count": 0,
        "mean_score_0_to_4": 3.8,
        "score_percent": 95.0,
        "score_distribution": {
          "1": 1,
          "2": 2,
          "3": 3,
          "4": 44
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 0,
        "input_tokens": 293550,
        "output_tokens": 1060650,
        "total_tokens": 1354200
      },
      "known_totals": {
        "cached_input_tokens": 0,
        "input_tokens": 293550,
        "output_tokens": 1060650,
        "total_tokens": 1354200
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 28,
          "incorrect_count": 2,
          "partial_credit_count": 1,
          "zero_count": 1,
          "mean_score_0_to_4": 3.8,
          "score_percent": 95.0,
          "score_distribution": {
            "0": 1,
            "2": 1,
            "4": 28
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.933333333333333,
          "score_percent": 98.33333333333333,
          "score_distribution": {
            "2": 1,
            "4": 29
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.966666666666667,
          "score_percent": 99.16666666666667,
          "score_distribution": {
            "3": 1,
            "4": 29
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 17,
          "incorrect_count": 3,
          "partial_credit_count": 3,
          "zero_count": 0,
          "mean_score_0_to_4": 3.75,
          "score_percent": 93.75,
          "score_distribution": {
            "2": 2,
            "3": 1,
            "4": 17
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 14,
          "incorrect_count": 6,
          "partial_credit_count": 6,
          "zero_count": 0,
          "mean_score_0_to_4": 3.35,
          "score_percent": 83.75,
          "score_distribution": {
            "1": 2,
            "2": 3,
            "3": 1,
            "4": 14
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 15,
          "incorrect_count": 5,
          "partial_credit_count": 5,
          "zero_count": 0,
          "mean_score_0_to_4": 3.55,
          "score_percent": 88.75,
          "score_distribution": {
            "1": 1,
            "2": 2,
            "3": 2,
            "4": 15
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**The intrinsic gain roughly doubles (≈ +6 dB)** — but you pay for it with 4× the area and ~4× lower $f_T$.\n\n## Why\n\nIntrinsic gain is\n\n$$A_{v0}=g_m r_o$$\n\nWrite it in a form that exposes the sizing dependence (square‑law, saturation, **fixed drain current** $I_D$):\n\n$$g_m=\\frac{2I_D}{V_{ov}},\\qquad r_o=\\frac{1}{\\lambda I_D}=\\frac{V_A}{I_D},\\qquad V_A = \\frac{L}{\\lambda'}$$\n\n$$\\boxed{A_{v0}=\\frac{2}{\\lambda V_{ov}}=\\frac{2V_A}{V_{ov}}=\\frac{2L}{\\lambda' V_{ov}}}$$\n\nNow scale $W\\to 2W$, $L\\to 2L$ at the same $I_D$:\n\n| Quantity | Effect |\n|---|---|\n| $W/L$ | unchanged → $V_{ov}$ unchanged (since $I_D=\\tfrac12\\mu C_{ox}\\frac{W}{L}V_{ov}^2$) |\n| $g_m=\\sqrt{2\\mu C_{ox}(W/L)I_D}$ | **unchanged** ($g_m/I_D$ unchanged) |\n| $\\lambda \\propto 1/L$, $V_A \\propto L$ | $r_o$ **doubles** |\n| $A_{v0}=g_m r_o$ | **doubles** |\n\nSo the width doubling does nothing to the gain (it just keeps the overdrive/current density constant); **all the gain comes from the longer channel**, which reduces channel‑length modulation.\n\nSame conclusion in weak inversion: $g_m = I_D/(nV_T)$ is sizing‑independent and $r_o\\propto L$, so again $A_{v0}$ doubles.\n\n## The cost\n\n$$C_{gs}\\approx \\tfrac23 WLC_{ox} \\;\\to\\; 4\\times \\qquad \\omega_T=\\frac{g_m}{C_{gs}}\\propto \\frac{\\mu V_{ov}}{L^2}\\;\\to\\;\\frac{1}{4}\\times$$\n\n- Gate capacitance (and area) grow 4×.\n- Transit frequency / achievable bandwidth drops ~4×.\n- This is the classic **gain–bandwidth (and area) trade‑off**: you buy a factor of 2 in gain for a factor of 4 in speed.\n\n## Caveats\n\n- $\\lambda\\propto 1/L$ is a crude model. In real short‑channel devices $r_o$ often improves *faster* than linearly when you go from minimum length to 2–4× minimum (DIBL is strongly suppressed), then saturates — so the first doubling of $L$ can give more than 2× gain.\n- If instead you hold $V_{GS}$ fixed, $I_D$ also stays the same (because $W/L$ is unchanged), so the conclusion is identical.\n- If you *only* doubled $W$ (fixed $L$, fixed $I_D$), $V_{ov}$ would drop by $\\sqrt2$, so $g_m$ rises by $\\sqrt 2$ and gain rises by $\\sqrt2$ — width alone helps only through moving to a higher $g_m/I_D$.",
        "format": "markdown",
        "sha256": "ec12583b88f48aaebc4e019bbaf81510ffc1cb8dc2935ecbffb7d179962183fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: doubling W and L preserves W/L, so gm and drain current stay approximately constant while the longer channel roughly doubles ro. The additional area and bandwidth observations are consistent with the stated assumptions.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 2157,
        "total_tokens": 2191,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 2157,
        "total_tokens": 2191,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nThe intrinsic gain **doubles** (≈ +6 dB) — but you pay for it with 4× the gate capacitance, so the device gets ~4× slower.\n\n## Why\n\nIntrinsic gain is\n\n$$A_{v0} = g_m r_o$$\n\n**Transconductance (unchanged).** Both $g_m$ and $I_D$ depend on $W/L$, not on $W$ and $L$ separately:\n\n$$g_m = \\sqrt{2\\mu C_{ox}\\tfrac{W}{L} I_D} = \\mu C_{ox}\\tfrac{W}{L}V_{ov}$$\n\nDoubling $W$ and $L$ together leaves $W/L$ fixed, so at the same bias current (or same $V_{GS}$) the overdrive and $g_m$ are unchanged.\n\n**Output resistance (doubles).** Channel-length modulation scales inversely with $L$:\n\n$$\\lambda \\propto \\frac{1}{L}, \\qquad V_A = \\frac{1}{\\lambda} = V_A' L, \\qquad r_o = \\frac{V_A' L}{I_D}$$\n\nSo doubling $L$ doubles $r_o$ — a longer channel means the drain depletion region eats up a smaller *fraction* of the channel, so $I_D$ is less sensitive to $V_{DS}$.\n\n**Product:**\n\n$$A_{v0} = g_m r_o = \\frac{2I_D}{V_{ov}}\\cdot\\frac{V_A' L}{I_D} = \\frac{2V_A' L}{V_{ov}} \\;\\;\\propto\\; L$$\n\nGain scales with $L$ only → it doubles. (Equivalently $A_{v0} = 2/(\\lambda V_{ov})$, and $\\lambda$ was halved.)\n\n## The catch\n\n$$C_{gs} \\approx \\tfrac{2}{3}WLC_{ox} \\;\\Rightarrow\\; 4\\times \\text{ larger}$$\n\n$$\\omega_T = \\frac{g_m}{C_{gs}+C_{gd}} \\;\\Rightarrow\\; \\text{drops by } 4\\times$$\n\nSo the gain–bandwidth product actually gets worse by ~2×, and the area grows 4×. This is the classic analog trade-off: long devices for high-gain stages (current mirrors, cascode/amplifying transistors), short devices where speed matters.\n\n**Caveats:** $\\lambda \\propto 1/L$ is a first-order model; in short-channel nodes the improvement with $L$ is often steeper than linear near minimum length (DIBL fading out) and saturates for large $L$. Also, if instead you double $W$ only, $g_m$ grows as $\\sqrt{W}$ (fixed $I_D$) while $r_o$ is unchanged — gain rises as $\\sqrt{W}$ but $V_{ov}$ shrinks; doubling $L$ only (fixed $I_D$) doubles $r_o$ but cuts $g_m$ by $\\sqrt{2}$, giving $\\sqrt{2}$ more gain.",
        "format": "markdown",
        "sha256": "f8c8cca7c18d3fd9b6beb2b98847008a0d4e8e4bb5657bb3396dd8e4a866621b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with W/L and overdrive fixed, gm and ID stay about constant while the longer channel increases ro. The added capacitance and speed discussion is secondary to the question.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 1822,
        "total_tokens": 1856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 786,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 1822,
        "total_tokens": 1856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 786,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**The intrinsic gain roughly doubles (+6 dB)** — because $g_m$ is unchanged while $r_o$ doubles.\n\n## Why\n\nIntrinsic gain is\n\n$$A_{v,\\text{int}} = g_m r_o$$\n\nAssume we keep the **same bias current $I_D$** (the usual condition for comparing intrinsic gain), and use the square-law model:\n\n**Transconductance:**\n$$g_m = \\sqrt{2\\mu C_{ox}\\left(\\frac{W}{L}\\right)I_D}$$\n\nDoubling both $W$ and $L$ leaves $W/L$ unchanged → **$g_m$ is unchanged** (the overdrive $V_{ov}$ is also unchanged).\n\n**Output resistance:**\n$$r_o = \\frac{1}{\\lambda I_D}, \\qquad \\lambda \\propto \\frac{1}{L}$$\n\nDoubling $L$ halves $\\lambda$ → **$r_o$ doubles**.\n\n**Product:**\n$$A_{v,\\text{int}} = g_m r_o = \\frac{2}{\\lambda V_{ov}} \\propto \\frac{L}{V_{ov}}$$\n\nSo the gain scales with $L$ (at fixed overdrive) and is **independent of $W$** — doubling both dimensions doubles the gain.\n\n## The catch: you pay in speed and area\n\n$$f_T \\approx \\frac{g_m}{2\\pi C_{gs}}, \\qquad C_{gs} \\approx \\tfrac{2}{3}WLC_{ox}$$\n\nGate capacitance scales with $WL$, so it **quadruples**, while $g_m$ stays the same → **$f_T$ drops by 4×**. Area also grows 4×. This is the classic gain–bandwidth trade-off in analog design: long channels for high gain (cascodes, current mirrors, amplifier input pairs), short channels for speed.\n\n## Caveats\n\n- $\\lambda \\propto 1/L$ is a crude model. In modern short-channel devices, $r_o$ is dominated by DIBL and other 2-D effects, and the improvement with $L$ can be *stronger* than linear near minimum length (going from, say, $L_{min}$ to $2L_{min}$ often gives more than 2× gain), then saturate for long devices.\n- In **weak inversion**, $g_m = I_D/(nV_T)$ is independent of $W/L$ entirely, so the result is the same: gain doubles with $2L$.\n- If instead you scaled the *current* with $W$ (constant current density), $g_m$ would double and $r_o$ would stay about the same — gain would again roughly double, but with 2× the power.",
        "format": "markdown",
        "sha256": "79aa09fab9355939ce0c2be92a75d96d68f9c0bd70b87547c09b37a22d31f98c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The main result and reasoning are correct: with unchanged W/L and bias current, gm stays about constant while doubling L roughly doubles ro and intrinsic gain. However, the optional claim that scaling current with W makes gm double and ro unchanged is incorrect for doubling both dimensions; this does not change the main conclusion.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 1946,
        "total_tokens": 1980,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1044,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 1946,
        "total_tokens": 1980,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1044,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both are right — they're just holding different things constant.** This is one of those classic \"it depends what's on the x‑axis\" arguments.\n\nStart from the square-law saturation current and write $g_m$ three equivalent ways:\n\n$$I_D=\\tfrac{1}{2}\\mu C_{ox}\\frac{W}{L}V_{ov}^2 \\quad\\Rightarrow\\quad g_m=\\mu C_{ox}\\frac{W}{L}V_{ov}=\\frac{2I_D}{V_{ov}}=\\sqrt{2\\mu C_{ox}\\tfrac{W}{L}I_D}$$\n\n**Student A's view (fixed device, let current change):**\nWith $W/L$ fixed, cranking up $V_{GS}$ raises $V_{ov}$ *and* $I_D$, and $g_m=\\mu C_{ox}(W/L)V_{ov}$ grows linearly. Bias a transistor harder and it gets more transconductance. True.\n\n**Student B's view (fixed current, let device size change):**\nWith the current budget $I_D$ fixed, $g_m = 2I_D/V_{ov}$ — so a *higher* overdrive means *less* transconductance per amp of bias current. Equivalently, the transconductance efficiency is\n\n$$\\frac{g_m}{I_D}=\\frac{2}{V_{ov}}$$\n\nTo run at high $V_{ov}$ at a given current you need a small $W/L$, and that small device has poor $g_m$. True as well.\n\n**Which one matters in practice?**\nUsually Student B's, because analog designers work with a fixed current/power budget. That's the whole basis of the $g_m/I_D$ design methodology: low overdrive (~50–150 mV, approaching weak inversion) buys you maximum $g_m$ and intrinsic gain per microamp, at the cost of big devices, large capacitance, and slower speed. High overdrive buys speed, better matching, and more $V_{DS}$ headroom, but costs you gain for the same current.\n\n**Two caveats:**\n- In weak inversion the square law fails and $g_m/I_D$ saturates at $1/(nV_T)\\approx 25$–$35\\ \\mathrm{V^{-1}}$ — you can't keep improving efficiency by lowering $V_{ov}$ forever.\n- In short-channel devices, velocity saturation gives $g_m \\to W C_{ox} v_{sat}$, roughly *independent* of $V_{ov}$. So Student A's linear increase flattens out at high overdrive, while Student B's $g_m/I_D \\propto 1/V_{ov}$ penalty still applies.",
        "format": "markdown",
        "sha256": "b6e4abb37f347d67c24c0ed34f9ed104ab0acecd735b6707b6a08a70822175ff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that for fixed W/L, increasing overdrive increases gm, and that gm decreases with overdrive only when ID is held fixed. The extra practical commentary is not needed but does not change the central answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 52,
        "output_tokens": 1636,
        "total_tokens": 1688,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 52,
        "output_tokens": 1636,
        "total_tokens": 1688,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Both are right — they're just holding different things constant.\n\nFor a long‑channel MOSFET in saturation, the three equivalent forms of transconductance are:\n\n$$g_m = \\mu_n C_{ox}\\frac{W}{L}V_{ov} \\;=\\; \\frac{2I_D}{V_{ov}} \\;=\\; \\sqrt{2\\mu_n C_{ox}\\tfrac{W}{L}I_D}$$\n\nEach form \"hides\" a different variable, and that's the whole source of the argument.\n\n### Student A's case: fixed device geometry (W/L), current allowed to change\n$$g_m = \\mu_n C_{ox}\\frac{W}{L}V_{ov} \\quad \\Rightarrow \\quad g_m \\propto V_{ov}$$\n\nCrank up the gate drive on a given transistor and $I_D$ rises as $V_{ov}^2$, so $g_m$ rises linearly. **A is correct.**\n\n*Example:* $\\mu_nC_{ox} = 200\\,\\mu\\text{A/V}^2$, $W/L = 10$\n- $V_{ov} = 0.2$ V → $I_D = 40\\,\\mu$A, $g_m = 400\\,\\mu$S\n- $V_{ov} = 0.4$ V → $I_D = 160\\,\\mu$A, $g_m = 800\\,\\mu$S\n\n### Student B's case: fixed bias current (the usual analog design constraint)\n$$g_m = \\frac{2I_D}{V_{ov}} \\quad \\Rightarrow \\quad g_m \\propto \\frac{1}{V_{ov}}$$\n\nHere you're spending a fixed current budget. Choosing a *smaller* overdrive means choosing a *wider* device, which gives more $g_m$ for the same current. **B is correct.**\n\n*Example:* $I_D = 100\\,\\mu$A fixed\n- $V_{ov} = 0.2$ V (needs $W/L = 25$) → $g_m = 1$ mS\n- $V_{ov} = 0.4$ V (needs $W/L = 6.25$) → $g_m = 500\\,\\mu$S\n\n### The quantity that always goes down: transconductance efficiency\n$$\\frac{g_m}{I_D} = \\frac{2}{V_{ov}}$$\n\nThis is monotonically decreasing in $V_{ov}$, no exceptions, and it's the basis of the $g_m/I_D$ design methodology. Low overdrive (weak inversion) buys you gain per unit current; high overdrive buys you speed ($f_T \\propto V_{ov}$), matching, and signal swing headroom — at the cost of efficiency.\n\n### Reality check for short-channel devices\nOnce velocity saturation kicks in, $I_D$ becomes roughly *linear* in $V_{ov}$ and\n\n$$g_m \\approx W C_{ox} v_{sat}$$\n\nwhich is essentially **independent of $V_{ov}$**. So at high overdrive in a modern process, A's linear increase flattens out entirely. The $g_m/I_D$ penalty, however, still applies.\n\n**Bottom line:** A is right for a fixed-size device driven harder; B is right for a fixed current budget, which is how analog designers normally frame it.",
        "format": "markdown",
        "sha256": "0408592445fa437080fd6f87d3e346a4a95fd62f1c2bfc3575e5ef73d277247e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that for a fixed-size long-channel MOSFET, increasing overdrive raises current and gm, so Student A is correct; it also correctly states Student B's result applies when current is fixed and device size changes. The additional caveats do not alter the essential answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 52,
        "output_tokens": 1947,
        "total_tokens": 1999,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 52,
        "output_tokens": 1947,
        "total_tokens": 1999,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Both are right — they're just holding different things constant\n\nThe confusion comes from the fact that there are three algebraically equivalent ways to write $g_m$ for a square-law MOSFET in saturation, and each one makes a different variable look like \"the cause\":\n\n$$g_m = \\mu_n C_{ox}\\frac{W}{L}V_{OV} \\qquad g_m = \\sqrt{2\\mu_n C_{ox}\\tfrac{W}{L}\\,I_D} \\qquad g_m = \\frac{2I_D}{V_{OV}}$$\n\nThese are all the same equation. Which one you use depends on what you're free to change.\n\n### Student A's case: fixed device, sweep the gate voltage\n\nIf you take *one transistor* ($W/L$ fixed) and raise $V_{GS}$, then $g_m = \\mu_n C_{ox}(W/L)V_{OV}$ rises **linearly** with overdrive. Of course it does — you're also letting $I_D$ grow as $V_{OV}^2$.\n\nExample ($\\mu_n C_{ox} = 200\\ \\mu\\text{A/V}^2$, $W/L = 10$):\n\n| $V_{OV}$ | $I_D$ | $g_m$ |\n|---|---|---|\n| 0.2 V | 40 µA | 0.4 mA/V |\n| 0.4 V | 160 µA | 0.8 mA/V |\n\n**A is correct here.**\n\n### Student B's case: fixed bias current, choose the overdrive\n\nIn analog design you usually have a current budget. With $I_D$ pinned, $g_m = 2I_D/V_{OV}$, so a *larger* overdrive gives *less* transconductance. (Physically: you got the higher $V_{OV}$ by using a smaller, weaker device.)\n\nWith $I_D = 100\\ \\mu$A fixed:\n\n| $V_{OV}$ | $g_m$ |\n|---|---|\n| 0.2 V | 1.0 mA/V |\n| 0.4 V | 0.5 mA/V |\n\n**B is correct here.**\n\n### The statement that's always true\n\nThe *transconductance efficiency* unambiguously degrades with overdrive:\n\n$$\\frac{g_m}{I_D} = \\frac{2}{V_{OV}}$$\n\nYou always get fewer siemens per amp of bias current as $V_{OV$}$ increases. This is why low-overdrive (and subthreshold, where $g_m/I_D \\to 1/nV_T \\approx 25$–$30\\ \\text{V}^{-1}$) biasing is used for high-gain, low-power stages.\n\n### Real short-channel caveat\n\nIn a modern short-channel device, Student A's linear rise flattens out. Once the channel field causes velocity saturation,\n\n$$g_m \\approx W C_{ox} v_{sat}$$\n\nwhich is essentially **independent of $V_{OV}$**. Vertical-field mobility degradation, $\\mu_{eff} = \\mu_0/(1+\\theta V_{OV})$, can even make $g_m$ *fall* at very high overdrive. So A's law is a long-channel/low-field idealization.\n\n### Why you'd still choose a high overdrive\n\nDespite the $g_m$ penalty, large $V_{OV}$ buys you:\n- **Speed:** $f_T \\approx \\dfrac{3\\mu_n V_{OV}}{4\\pi L^2}$ (small devices, small $C_{gs}$)\n- **Matching and area:** smaller $\\Delta V_T$-driven offset relative to $V_{OV}$, less area\n- **Current-source output impedance / less sensitivity to $V_T$ shifts**\n\nAnd low overdrive buys you $g_m$, intrinsic gain, and voltage headroom — at the cost of bandwidth and die area.\n\n**Bottom line:** Ask \"per what?\" If per volt of gate drive on a given device, A wins. If per milliamp of bias current — the question that actually matters in design — B wins.",
        "format": "markdown",
        "sha256": "982afd1ecb0c6884db2acd56cb6ebc9c43b25d4d813b575f43a2c5bd25f32e88"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that for a fixed device, increasing overdrive raises gm because drain current rises with overdrive squared. It also accurately explains that gm falls with overdrive when current is held fixed; the extra caveats do not change the central answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 52,
        "output_tokens": 2331,
        "total_tokens": 2383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 52,
        "output_tokens": 2331,
        "total_tokens": 2383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**Yes.** For small‑signal (incremental) analysis, the PMOS model has exactly the same topology *and the same polarities* as the NMOS model:\n\n```\n        G  o────┬────────────┬──── D\n                │            │\n            (gate caps)   ↓ gm·vgs   ↓ gmb·vbs   ⌷ ro\n                │            │\n        S  o────┴────────────┴──── S\n```\n\nwith $g_m$, $g_{mb}$, and $r_o$ all **positive** quantities, the dependent current sources pointing **from drain to source**, and $r_o$ tied from D to S. Only the *numerical values* differ (and, of course, the DC bias polarities).\n\n## Why the current source doesn't flip\n\nThe key is to use consistent sign conventions: define $v_{GS}=v_G-v_S$ and let $I_D$ be the current flowing **into the drain** (D → S inside the device). For a saturated PMOS:\n\n$$I_D = -\\tfrac{1}{2}\\mu_p C_{ox}\\frac{W}{L}\\,(V_{GS}+|V_{TH}|)^2 (1+\\lambda|V_{DS}|)$$\n\n(negative, since current actually flows S → D). Then\n\n$$g_m \\equiv \\frac{\\partial I_D}{\\partial V_{GS}} = -\\mu_p C_{ox}\\frac{W}{L}\\,(V_{GS}+|V_{TH}|) \\;>\\; 0$$\n\nbecause $V_{GS}+|V_{TH}|<0$ in the on state. So $i_d=+g_m v_{gs}$ — identical in form **and sign** to the NMOS case.\n\nIntuitively: making the gate *more positive* (positive $v_{gs}$) reduces the source‑to‑drain current, which is the same thing as increasing the drain‑to‑source current. Hence a positive $g_m$ with the source arrow pointing D → S.\n\nThe same argument applies to the output resistance:\n\n$$\\frac{1}{r_o}=\\frac{\\partial I_D}{\\partial V_{DS}} > 0$$\n\nsince both $I_D$ and $V_{DS}$ are negative — two sign flips cancel. Likewise for $g_{mb}$ (with $v_{bs}=v_B-v_S$).\n\nIf you prefer to work with $v_{SG}$ and the source‑to‑drain current, you get $i_{sd}=g_m v_{sg}$ — the same model, just viewed with both signs inverted. Either convention is fine; just don't mix them.\n\n## What *is* different\n\n| | NMOS | PMOS |\n|---|---|---|\n| Model topology / source direction | same | same |\n| Mobility | $\\mu_n$ | $\\mu_p \\approx \\tfrac{1}{2}\\text{–}\\tfrac{1}{4}\\mu_n$ → lower $g_m$ for equal $W/L$, $|V_{ov}|$ |\n| Bias polarities | $V_{GS}>V_{TH}>0$, $V_{DS}>0$ | $V_{GS}<-|V_{TH}|$, $V_{DS}<0$ |\n| Bulk | usually common p‑substrate (tied to GND) | separate n‑well, often tied to source → $g_{mb}$ can be eliminated |\n| Output resistance | typically somewhat lower $\\lambda$-dependence (process dependent) | often higher $r_o$ for same $L$ |\n\n## Practical consequence\n\nYou can analyze a PMOS circuit with the *identical* equations you'd use for NMOS — e.g., a PMOS common‑source stage with resistive load still gives $A_v=-g_m(R_D\\|r_o)$. Only the DC operating‑point calculation requires attention to polarity. (Many designers redraw PMOS stages \"upside down,\" with the source at the top, which makes the topological equivalence to the NMOS version visually obvious.)",
        "format": "markdown",
        "sha256": "697a7d4a2a73ca81a37672b1a7e7094ce574035064274f8c29ebbc4c0ce7daf2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The essential conclusion—that the PMOS small-signal model has the same form as the NMOS model—is correct and meets the golden solution’s explicit full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 2738,
        "total_tokens": 2771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1425,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 2738,
        "total_tokens": 2771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1425,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**Yes.** The PMOS small‑signal model has exactly the same topology *and* the same polarities as the NMOS model. No sign flips, no reversed current source. Only the numerical values of the parameters differ.\n\n## Why — and why it feels like it shouldn't be true\n\nThe confusion arises because for a PMOS *all* of the bias quantities are negative ($V_{GS}<0$, $V_{DS}<0$, and $I_D<0$ if you define $I_D$ as flowing **into** the drain). Two sign reversals cancel, leaving the model unchanged.\n\n**Transconductance.** In saturation,\n\n$$|I_D| = \\tfrac{1}{2}\\mu_p C_{ox}\\frac{W}{L}\\,(V_{SG}-|V_{TH}|)^2$$\n\nWriting this with the standard (into‑the‑drain) current convention, $I_D = -\\tfrac{1}{2}k_p(-V_{GS}-|V_{TH}|)^2$, so\n\n$$g_m \\equiv \\frac{\\partial I_D}{\\partial V_{GS}} = k_p\\,(V_{SG}-|V_{TH}|) = \\frac{2|I_D|}{|V_{OV}|} = \\sqrt{2\\mu_p C_{ox}\\tfrac{W}{L}|I_D|}\\;>\\;0$$\n\nThe transconductance comes out **positive**, exactly as for NMOS. So the dependent source $g_m v_{gs}$ still points **from drain to source** inside the model.\n\n**Output resistance.** With $|V_{DS}| = -V_{DS}$,\n\n$$\\frac{\\partial I_D}{\\partial V_{DS}} = \\lambda |I_D| > 0 \\quad\\Rightarrow\\quad r_o = \\frac{1}{\\lambda |I_D|} = \\frac{|V_A|}{|I_D|}$$\n\nagain positive, connected drain‑to‑source as usual.\n\n**Body effect.** Likewise $g_{mb} = \\eta\\, g_m > 0$, with $\\eta = \\gamma/(2\\sqrt{2\\phi_F + V_{SB}})$, oriented the same way.\n\nSo the complete model — $C_{gs}, C_{gd}, C_{db}, C_{sb}$, $g_m v_{gs}$, $g_{mb}v_{bs}$, $r_o$ — is drawn identically for both device types.\n\n## Practical consequences\n\n- When analyzing a circuit, **replace a PMOS with the same small‑signal model you use for an NMOS.** A common error is to flip the current source because \"the PMOS source is at the top\"; that gives you the wrong sign. Orientation on the schematic is irrelevant — only the terminal labels matter.\n- A corollary: a common‑source PMOS stage has the same inverting gain $-g_m(r_o\\|R_D)$ as its NMOS counterpart; a PMOS source follower is still non‑inverting, etc. Topologically, PMOS and NMOS circuits are small‑signal equivalent.\n\n## What actually differs\n\n| Quantity | Comment |\n|---|---|\n| $\\mu_p \\approx (1/2\\text{–}1/4)\\mu_n$ | lower $g_m$ for the same $W/L$ and $I_D$; PMOS usually sized 2–3× wider |\n| $\\lambda_p$, $|V_A|$ | often (historically) larger $r_o$ for PMOS at a given $L$ |\n| $\\gamma_p$, $|V_{THp}|$ | different body‑effect coefficient and threshold |\n| Body terminal | in an n‑well process the PMOS sits in its own n‑well, so its bulk can be tied to its source ($g_{mb}=0$); NMOS bulks share the p‑substrate and must go to the most negative supply (unless deep n‑well/triple‑well is available) |\n| Flicker noise | PMOS typically shows lower $1/f$ noise (buried‑channel‑like conduction, less trapping) |\n\nSo: same model, different numbers.",
        "format": "markdown",
        "sha256": "e4793cfb3270a32f4eeba50ddd5b4e9a126117cfb8aef757d143a2749244b091"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The affirmative conclusion that the PMOS small-signal model has the same form as the NMOS model satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 3073,
        "total_tokens": 3106,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1714,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 3073,
        "total_tokens": 3106,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1714,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**Yes.** With a consistent set of sign conventions, the small‑signal equivalent circuit of a PMOS transistor is *topologically and numerically identical* to that of an NMOS transistor: the same $g_m v_{gs}$ source (same arrow direction), the same $g_{mb}v_{bs}$ source, the same $r_o$, and the same (positive) capacitances. Only the *numerical values* of the parameters differ, because they come from a different bias point and different material constants.\n\n## Why — the sign bookkeeping\n\nThe reason people worry about this is that for a PMOS device $V_{GS}<0$, $V_{TH}<0$, and the DC current flows from source to drain. But a small-signal model describes *derivatives around the operating point*, and the polarity reversals cancel.\n\nUse the universal convention: all terminal voltages referenced to a common ground, and all terminal currents defined **into** the device.\n\nFor a PMOS in saturation, the drain current defined *into* the drain is negative:\n\n$$I_D = -\\tfrac{1}{2}\\mu_p C_{ox}\\frac{W}{L}\\left(V_{GS}-V_{TH}\\right)^2 (1+\\lambda|V_{DS}|)$$\n\nwhere $V_{GS}-V_{TH}<0$. Then\n\n$$g_m \\equiv \\frac{\\partial I_D}{\\partial V_{GS}} = -\\mu_p C_{ox}\\frac{W}{L}\\left(V_{GS}-V_{TH}\\right) = +\\mu_p C_{ox}\\frac{W}{L}\\left|V_{GS}-V_{TH}\\right| > 0$$\n\nSo $g_m$ is **positive**, exactly as for an NMOS. Physically: raising the gate voltage of a PMOS reduces the source‑to‑drain current, which is the same thing as injecting extra current *into* the drain node — i.e., the dependent source points from drain to source, just like in the NMOS model.\n\nThe same argument applies to the other elements:\n\n- $r_o = \\partial V_{DS}/\\partial I_D > 0$ (both $V_{DS}$ and $I_D$ flip sign, so the ratio doesn't).\n- $g_{mb} = \\partial I_D/\\partial V_{BS} > 0$: the body still acts as a back gate with the same relative sign.\n- $C_{gs}, C_{gd}, C_{db}, C_{sb}$ are physical capacitances — always positive.\n\nHence the familiar hybrid‑$\\pi$ model, with all the same signs, serves both devices.\n\n**Equivalent alternative convention:** if instead you define $I_D$ as positive flowing *out* of the PMOS drain and use $g_m=\\partial|I_D|/\\partial|V_{GS}|$, you must flip the arrow of the dependent source (source → drain) *and* interpret $v_{gs}$ accordingly. That gives the same answer; it's just a different, equally valid bookkeeping. Mixing the two is what produces sign errors.\n\n## Practical consequence\n\nSmall‑signal analysis is polarity-blind. A PMOS common-source stage with a resistive load gives\n\n$$A_v = -g_m (r_o \\| R_D)$$\n\n— identical in form to the NMOS case. Likewise a PMOS source follower, cascode, differential pair, etc. This is why in AC analysis you can often ignore whether a device is N- or P-type, as long as you've verified in the DC analysis that it's in saturation.\n\n## What *does* differ\n\nThese are parameter values and layout facts, not model structure:\n\n| Item | Comment |\n|---|---|\n| $\\mu_p \\approx (1/2\\text{–}1/4)\\,\\mu_n$ | For equal $W/L$ and $I_D$, $g_m$ is smaller by $\\sqrt{\\mu_p/\\mu_n}$; PMOS must be made wider for equal $g_m$ |\n| Source identification | The source is the **highest**-potential terminal for PMOS, lowest for NMOS |\n| Body terminal | PMOS sits in an n-well, usually tied to $V_{DD}$ or to its own source (so $g_{mb}$ is often zeroed); bulk NMOS share the p-substrate tied to ground |\n| $\\lambda$, flicker noise | PMOS often shows somewhat higher $r_o$ and notably lower $1/f$ noise (buried-channel-like behavior in many processes) |",
        "format": "markdown",
        "sha256": "bab38e302305c7aa95bcf417a965276648400304ce2cf4c52a8ec97c5be79728"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The essential answer is yes: the PMOS small-signal model has the same form as the NMOS model with consistent polarity conventions. The golden solution explicitly grants full credit for that conclusion; the extra detail is not required.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 3389,
        "total_tokens": 3422,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 3389,
        "total_tokens": 3422,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nIn this circuit the gate and drain of $M_1$ are tied together (a **diode‑connected** transistor), the source is grounded, and $V_X$ drives the gate/drain node while $I_X$ flows **into** the drain.\n\nSince the gate and drain are shorted:\n\n$$V_{GS} = V_{DS} = V_X$$\n\n**Key observation:** the saturation condition is $V_{DS} \\ge V_{GS} - V_{TH}$, i.e. $V_X \\ge V_X - V_{TH}$, which is *always* true. **A diode‑connected MOSFET is always in saturation (or off).**\n\n## Current Equation\n\n**Region 1: $V_X < V_{TH}$** → $V_{GS} < V_{TH}$, the device is off:\n\n$$I_X = 0$$\n\n(This also holds for $V_X<0$: the left node then acts as the source, and since the gate is tied to it, $V_{GS}=0$ and the transistor stays off.)\n\n**Region 2: $V_X \\ge V_{TH}$** → saturation:\n\n$$\\boxed{I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}\\,(V_X - V_{TH})^2}$$\n\n(with channel‑length modulation, multiply by $(1+\\lambda V_X)$ — a slight upward bending.)\n\n## Sketch\n\n```\n I_X\n  ^                                  |\n  |                                 /\n  |                                /\n  |                              /\n  |                            /\n  |                         /\n  |                      /      I_X = ½µnCox(W/L)(V_X–V_TH)²\n  |                  /\n  |             . /\n  |        . '\n  |____.________________________________> V_X\n  0        V_TH\n   (I_X = 0, M1 off)\n```\n\n## Comments\n\n* The curve starts at $V_X = V_{TH}$ with **zero slope** and rises as a **parabola** (square law).\n* The slope of the curve is the transconductance:\n $$\\frac{dI_X}{dV_X} = \\mu_n C_{ox}\\frac{W}{L}(V_X-V_{TH}) = g_m$$\n so the incremental resistance seen looking into the device is $1/g_m$, which **decreases** as $V_X$ grows — the device looks increasingly like a small resistor (hence the name \"diode‑connected load\").",
        "format": "markdown",
        "sha256": "e54966276fbb73500ae851851e0650aa421025044b8e390fcf5a31a6120488f7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives approximately zero current below threshold and a quadratic rise above it. The negative-VX caveat is secondary to the question and does not affect the essential answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1304,
        "output_tokens": 1553,
        "total_tokens": 2857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1304,
        "output_tokens": 1553,
        "total_tokens": 2857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nThe transistor is **diode‑connected**: its gate is tied to its drain, and the source is grounded. Hence\n\n$$V_{GS}=V_{DS}=V_X$$\n\n**Key observation:** As long as $M_1$ is on ($V_{GS}>V_{TH}$), we automatically have\n\n$$V_{DS}=V_{GS}>V_{GS}-V_{TH}$$\n\nso the device is **always in saturation** (it can never enter the triode region). A diode‑connected MOSFET is therefore a square‑law two‑terminal element.\n\n## The I–V Relationship\n\n**Region 1 — $V_X < V_{TH}$:** the transistor is cut off,\n\n$$I_X = 0$$\n\n**Region 2 — $V_X \\ge V_{TH}$:** saturation,\n\n$$\\boxed{I_X=\\frac{1}{2}\\,\\mu_n C_{ox}\\frac{W}{L}\\,(V_X-V_{TH})^2}$$\n\n(with channel‑length modulation: $\\times\\,(1+\\lambda V_X)$, usually neglected here).\n\nThe incremental slope is just the transconductance:\n\n$$\\frac{dI_X}{dV_X}=\\mu_nC_{ox}\\frac{W}{L}(V_X-V_{TH})=g_m \\qquad\\Longrightarrow\\qquad R_{eq}=\\frac{1}{g_m}$$\n\nSo the slope is **zero at $V_X=V_{TH}$** and grows **linearly** thereafter — the curve is a parabola whose vertex sits at $(V_{TH},0)$.\n\n## Sketch\n\n```\n  I_X ^\n      |                                    /\n      |                                  /\n      |                                /\n      |                             /\n      |                          /\n      |                       /\n      |                    /\n      |                 /\n      |              /        slope = g_m  (grows linearly with V_X)\n      |          ..·\n      |______....·___________________________________> V_X\n      0          V_TH\n        (cutoff: I_X = 0)     (saturation: square law)\n```\n\n**Summary:** $I_X$ stays at zero until $V_X$ reaches $V_{TH}$, then rises as a parabola with zero initial slope; equivalently, the device looks like an open circuit for $V_X<V_{TH}$ and like a resistor $1/g_m$ (which shrinks as $V_X$ grows) for larger $V_X$.",
        "format": "markdown",
        "sha256": "e3739ad95329a0db07487d423344a895bbe2d05012c1bbf4be65848fb371fa9a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its saturation operation above threshold, and the zero-then-quadratic I–V curve. The added small-signal and channel-length-modulation comments do not detract from the essential answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1304,
        "output_tokens": 1367,
        "total_tokens": 2671,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1304,
        "output_tokens": 1367,
        "total_tokens": 2671,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nIn this circuit the gate and drain of M₁ are shorted together, and the source is grounded. Therefore\n\n$$V_{GS}=V_{DS}=V_X$$\n\n**Key observation:** A diode‑connected MOSFET is *always* in saturation (if it conducts at all), because\n\n$$V_{DS}=V_{GS} \\;>\\; V_{GS}-V_{TH}$$\n\nis satisfied for any $V_X$. So we never need the triode equation.\n\n## The I–V Relationship\n\n**For $V_X \\le V_{TH}$:** $V_{GS}<V_{TH}$, the device is off,\n\n$$I_X = 0$$\n\n**For $V_X > V_{TH}$:** saturation (square law),\n\n$$\\boxed{I_X=\\frac{1}{2}\\mu_nC_{ox}\\frac{W}{L}\\left(V_X-V_{TH}\\right)^2\\left(1+\\lambda V_X\\right)}$$\n\n(Usually we drop the $\\lambda$ term for a hand sketch.)\n\nNote that for $V_X<0$ the grounded terminal becomes the source, giving $V_{GS}=V_X<0$ — still off. So no current flows for any $V_X<V_{TH}$.\n\n## The Sketch\n\n```\n I_X ^\n     |                                   /\n     |                                  /\n     |                                 /\n     |                               /\n     |                             /     ← parabola, I_X ∝ (V_X – V_TH)²\n     |                          /\n     |                       /\n     |                   /\n     |              /\n     |        /\n   0 |______________/______________________________>  V_X\n     0            V_TH\n       (I_X = 0, M₁ off)\n```\n\n## Comments on the shape\n\n- The curve is flat (exactly zero) up to $V_X=V_{TH}$.\n- At $V_X=V_{TH}$ the curve leaves the axis with **zero slope**, then grows quadratically.\n- The local slope is the transconductance:\n$$\\frac{dI_X}{dV_X}=\\mu_nC_{ox}\\frac{W}{L}(V_X-V_{TH})=g_m$$\nwhich rises *linearly* with $V_X$.\n- Thus the diode‑connected device acts as a **nonlinear two‑terminal resistor** whose incremental resistance is\n$$R_{eq}=\\frac{1}{g_m}\\;\\Big(\\parallel r_O\\Big)$$\ni.e., it becomes \"stiffer\" (lower resistance) as $V_X$ increases.",
        "format": "markdown",
        "sha256": "0a66857a2cfbcb1da45827430bc73064033bc1773101b90405d78452fffbf250"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives approximately zero current up to threshold followed by a quadratic rise in saturation. The negative-voltage comment is inaccurate, but that topic is secondary and does not change the essential answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1304,
        "output_tokens": 1527,
        "total_tokens": 2831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 686,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1304,
        "output_tokens": 1527,
        "total_tokens": 2831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 686,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up\n\nThe transistor's source is grounded, its gate sits at $V_X$, and its drain is held at a **fixed** 1 V by the battery. So\n\n$$V_{GS}=V_X ,\\qquad V_{DS}=1\\ \\text{V (constant)}$$\n\nand $I_X$ is just the drain current of $M_1$ drawn out of the 1‑V source.\n\n## Region by region\n\n**1. $V_X < V_{TH}$ — cutoff**\n\n$$I_X = 0$$\n\n**2. $V_{TH} < V_X < V_{TH}+1\\,\\text{V}$ — saturation**\n\nHere $V_{GS}-V_{TH} < V_{DS}=1$ V, so\n\n$$I_X=\\tfrac12\\,\\mu_nC_{ox}\\frac{W}{L}\\,(V_X-V_{TH})^2$$\n\na square‑law (parabolic) rise.\n\n**3. $V_X > V_{TH}+1\\,\\text{V}$ — triode**\n\nNow $V_{GS}-V_{TH} > V_{DS}=1$ V, so\n\n$$I_X=\\mu_nC_{ox}\\frac{W}{L}\\Big[(V_X-V_{TH})(1)-\\frac{1^2}{2}\\Big]\n=\\mu_nC_{ox}\\frac{W}{L}\\,\\big(V_X-V_{TH}-0.5\\big)$$\n\nBecause $V_{DS}$ is pinned at 1 V, the triode current grows **linearly** in $V_X$ with constant slope $\\mu_nC_{ox}(W/L)\\cdot(1\\text{ V})$. (The two expressions and their slopes match at $V_X=V_{TH}+1$ V, so the curve is smooth there.)\n\nAt the breakpoint: $I_X=\\tfrac12\\mu_nC_{ox}\\frac{W}{L}(1\\,\\text{V})^2$.\n\n## Sketch\n\n```\n I_X\n  ^\n  |                                        /\n  |                                      /   triode:\n  |                                    /     straight line,\n  |                                  /       slope = μnCox(W/L)(1V)\n  |                                /\n  |                              /\n  |                          _ /  ← V_X = V_TH + 1 V\n  |                      __/        (I_X = ½μnCox(W/L)(1V)²)\n  |                  __/\n  |              __/      saturation: parabola\n  |         ___/\n  |____ ___/\n  0-----|-------------------|----------------------> V_X\n      V_TH            V_TH + 1 V\n```\n\nSo: flat at zero up to $V_{TH}$, a parabolic increase over the 1‑V‑wide saturation window, then a straight line of constant slope for larger $V_X$.",
        "format": "markdown",
        "sha256": "af71fdfc80212e50a3fe054a9949af8134079fd8336eaa644b62d97fd5793822"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, the quadratic saturation rise from VTH to VTH + 1 V, and the roughly linear triode rise beyond the breakpoint.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1459,
        "output_tokens": 1481,
        "total_tokens": 2940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1459,
        "output_tokens": 1481,
        "total_tokens": 2940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nLook at the transistor's terminals:\n\n- **Source:** grounded  \n- **Gate:** tied to $V_X$ → $V_{GS} = V_X$  \n- **Drain:** tied to the 1‑V battery → $V_{DS} = 1\\ \\text{V}$ (constant!)\n\nSo $I_X$ is just the drain current of $M_1$ with a **fixed** $V_{DS}$ of 1 V while $V_{GS}$ is swept. This is a \"transfer characteristic,\" not an output characteristic.\n\n## Region by Region\n\n**1. Cutoff:** $V_X < V_{TH}$\n\n$$I_X = 0$$\n\n**2. Saturation:** $V_{TH} < V_X < V_{TH} + 1\\ \\text{V}$\n\nHere $V_{GS}-V_{TH} < V_{DS}=1\\,\\text{V}$, so the device is saturated:\n\n$$I_X = \\tfrac{1}{2}\\mu_nC_{ox}\\frac{W}{L}\\left(V_X - V_{TH}\\right)^2$$\n\na **parabola** rising from zero.\n\n**3. Triode:** $V_X > V_{TH} + 1\\ \\text{V}$\n\nNow $V_{GS}-V_{TH} > V_{DS}$, so with $V_{DS}=1$ V:\n\n$$I_X = \\mu_nC_{ox}\\frac{W}{L}\\left[(V_X-V_{TH})(1) - \\frac{1^2}{2}\\right] = \\mu_nC_{ox}\\frac{W}{L}\\left(V_X - V_{TH} - 0.5\\right)$$\n\na **straight line** of slope $\\mu_nC_{ox}(W/L)\\cdot(1\\,\\text{V})$.\n\n## Checking the Breakpoint\n\nAt $V_X = V_{TH}+1$ both expressions give $I_X = \\frac{1}{2}\\mu_nC_{ox}(W/L)(1)^2$, and both have the same slope $\\mu_nC_{ox}(W/L)$. **The curve is continuous and smooth** — the parabola blends tangentially into the line.\n\n## The Sketch\n\n```\n I_X\n  ^\n  |                                        ,'  ← triode: straight line,\n  |                                     ,'      slope = μnCox(W/L)(1V)\n  |                                  ,'\n  |                               ,'\n  |                            ,'\n  |                        _,-'\n  |                    _,-\"   ← saturation: square law\n  |                _,-\"\n  |            _,-\"\n  |      __,--\"\n  |__,--\"\n  +---------|----------------|------------------------> V_X\n  0       V_TH           V_TH+1V\n```\n\n**Summary:** flat at zero up to $V_{TH}$, then a quadratic (square‑law) rise over the 1‑V-wide saturation window, then a constant-slope straight line once the device enters the triode region. (Channel-length modulation would add only a slight tilt in saturation — invisible on this scale since $V_{DS}$ is fixed.)",
        "format": "markdown",
        "sha256": "d0b609a350d2cc9303a43f38dabaa4210a63d048bbf87f53f392d6df22c951e3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the zero-current, saturation-quadratic, and triode-linear regions with the breakpoint at VTH + 1 V, matching the full-credit rule.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1459,
        "output_tokens": 1685,
        "total_tokens": 3144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 666,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1459,
        "output_tokens": 1685,
        "total_tokens": 3144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 666,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nLook at what each terminal of $M_1$ sees:\n\n- **Source:** grounded → $V_S = 0$\n- **Gate:** tied to $V_X$ → $V_{GS} = V_X$\n- **Drain:** tied to the 1‑V battery → $V_{DS} = 1\\ \\text{V}$ (constant!)\n\nSo $V_{DS}$ is **fixed** and we simply sweep $V_{GS}=V_X$. The transistor therefore walks through its three regions as $V_X$ rises. Let $k \\equiv \\mu_nC_{ox}(W/L)$.\n\n## Region by Region\n\n**1. Cutoff: $V_X < V_{TH}$**\n\n$$I_X = 0$$\n\n**2. Saturation: $V_{TH} < V_X < V_{TH}+1\\,\\text{V}$**\n\nHere $V_{GS}-V_{TH} < V_{DS}=1\\,$V, so\n\n$$I_X=\\tfrac{1}{2}k\\,(V_X-V_{TH})^2$$\n\na **parabola** starting at $V_X = V_{TH}$.\n\n**3. Triode: $V_X > V_{TH}+1\\,\\text{V}$**\n\nNow $V_{GS}-V_{TH} > V_{DS}$, and with $V_{DS}=1\\,$V:\n\n$$I_X=k\\Big[(V_X-V_{TH})(1)-\\tfrac{1^2}{2}\\Big]=k\\big(V_X-V_{TH}-0.5\\big)$$\n\na **straight line** with slope $kV_{DS}=k(1\\ \\text{V})$.\n\nAt the boundary $V_X = V_{TH}+1$ both expressions give $I_X = k/2$, and both have slope $k$ — the curve and its slope are continuous there.\n\n## Sketch\n\n```\n I_X\n  ^\n  |                                /\n  |                               /\n  |                              /\n  |                             /      triode:\n  |                            /       I_X = k(V_X - V_TH - 0.5)\n  |                           /        (straight line, slope = k·1V)\n  |                          /\nk/2|- - - - - - - - - - - - -•\n  |                      _,-'\n  |                   ,-'   saturation:\n  |               _,-'      I_X = ½k(V_X - V_TH)²\n  |          __,-'          (parabola)\n  |_______,-'\n  0───────┴───────────────┴──────────────────────> V_X\n         V_TH          V_TH + 1V\n   (cutoff: I_X = 0)\n```\n\n**Summary:** $I_X$ stays at zero until $V_X = V_{TH}$, rises as a square law up to $V_X = V_{TH}+1\\,$V (where $I_X = k/2$), and thereafter grows **linearly** with slope $\\mu_nC_{ox}(W/L)\\cdot 1\\,$V, because the device enters the triode region with a fixed $V_{DS}$ of 1 V.",
        "format": "markdown",
        "sha256": "9e359752c8215853a05f8fcbf59ee7c89bcdbad331b39bea872d09958c6447a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions and gives the required quadratic rise followed by a roughly linear rise beyond VTH + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1459,
        "output_tokens": 1791,
        "total_tokens": 3250,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 799,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1459,
        "output_tokens": 1791,
        "total_tokens": 3250,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 799,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer: No.\n\n**Why**\n\nIn the figure both the gate **and** the source of $M_1$ are tied to ground, so\n\n$$V_{GS}=0$$\n\nFor an NMOS device to conduct (in the strong‑inversion sense) we need\n\n$$V_{GS}>V_{TH}$$\n\nSince $0 < V_{TH}$, the transistor is in **cutoff** for any value of the drain voltage $V_X$. Hence\n\n$$I_X \\approx 0$$\n\n(only the tiny subthreshold/junction‑leakage current flows, which is not a useful, well‑defined current).\n\nSo the structure behaves like an **open circuit** — you could call it a \"current source of value zero,\" but it cannot deliver a finite, controlled current to a load. Note that the defining property of a current source is a *constant non‑zero* current that is independent of the terminal voltage; here the current is simply zero, not constant‑and‑finite.\n\n**What is needed instead**\n\nTo use a MOSFET as a current source you must\n\n1. Bias the gate above threshold: $V_{GS} > V_{TH}$ (e.g., from a reference/mirror circuit), and\n2. Keep the device in **saturation**: $V_{DS} \\ge V_{GS}-V_{TH}$,\n\nin which case\n\n$$I_D \\simeq \\tfrac12 \\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{TH})^2\\,(1+\\lambda V_{DS}),$$\n\nwith a large (but finite) output resistance $r_O = 1/(\\lambda I_D)$ — i.e., a nearly ideal current source.\n\n(The only way the circuit as drawn would pass appreciable current is if $V_X$ were raised to the drain‑junction breakdown or punch‑through level — clearly not a usable current‑source operation.)",
        "format": "markdown",
        "sha256": "bed49610e5a7fb4b3fad00346e77812c4400f631bc316c264a3a91ec77faa9db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The device is a diode-connected PMOS, with its source at the top and gate and drain grounded; it presents a low impedance, not an off NMOS with VGS = 0. The golden solution explicitly assigns this mistaken-device explanation a score of 0.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 576,
        "output_tokens": 1456,
        "total_tokens": 2032,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 850,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 576,
        "output_tokens": 1456,
        "total_tokens": 2032,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 850,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer: **No.**\n\n## Why a MOSFET *can* be a current source\n\nA MOSFET behaves (approximately) as a current source between its drain and source only if **two** conditions hold:\n\n1. **V_GS is fixed by an independent bias** — it must not depend on the voltage of the node you are driving, and\n2. the device is in **saturation**, so that\n\n$$I_D \\approx \\tfrac{1}{2}\\mu C_{ox}\\frac{W}{L}(V_{GS}-V_{TH})^2(1+\\lambda V_{DS})$$\n\ni.e. a nearly constant current with a large output resistance $r_O = 1/(\\lambda I_D)$.\n\n## What the figure actually shows\n\nIn the figure the gate is **not** driven by an independent bias — it is tied to ground, i.e. to one of the other two terminals of the transistor. So M₁ is simply a **two‑terminal (diode‑connected) device**, with node X as its only free terminal.\n\n**As drawn (source at the top, gate shorted to the drain):**\n\n$$V_{SG}=V_{SD}=V_X \\;\\Rightarrow\\; V_{SD}>V_{SG}-|V_{TH}| \\text{ (always in saturation)}$$\n\n$$I_X=\\tfrac{1}{2}\\mu_p C_{ox}\\frac{W}{L}\\left(V_X-|V_{TH}|\\right)^2$$\n\nThe current is a *strong function of the terminal voltage* $V_X$: it is zero for $V_X<|V_{TH}|$ and rises quadratically above it. The small‑signal resistance seen at X is only\n\n$$R_X=\\frac{1}{g_m}\\quad(\\text{hundreds of }\\Omega \\text{ to a few k}\\Omega),$$\n\nnot the large $r_O$ of a real current source. So the device behaves like a **nonlinear resistor / \"diode\"**, not a current source.\n\n*(If instead you read the grounded lower terminal as the source, then $V_{GS}=0<V_{TH}$, the transistor is simply **off** and $I_X=0$ — again not a current source, just an open circuit.)*\n\n## How to fix it\n\nTie the gate to a **separate fixed bias** $V_B$ (with the source grounded), choosing $V_B-V_{TH}$ for the desired current and keeping $V_X \\ge V_{GS}-V_{TH}$ so the device stays in saturation. Then $I_X$ is set by $V_B$ and is nearly independent of $V_X$ (output resistance $r_O$) — that is a current source.",
        "format": "markdown",
        "sha256": "1d78bcb4ddc4dd1ab877088f05db68d15788958c4a985d3acd6620e24ba38f02"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS with its source at the top and gate tied to drain at ground, and explains that the diode-connected device presents about 1/gm, so its current depends strongly on VX rather than acting as a current source. The alternate-reading aside does not change the correct main analysis.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 576,
        "output_tokens": 11584,
        "total_tokens": 12160,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 576,
        "output_tokens": 11584,
        "total_tokens": 12160,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Looking at the connections\n\nThe arrow on the top terminal points *into* the device, so that terminal is the **source of a PMOS**. The other two terminals (gate and drain) are both tied to ground, and the test current $I_X$ is injected into the source. Note that this means\n\n$$V_G = V_D = 0 \\;\\;\\Rightarrow\\;\\; V_{GD}=0$$\n\ni.e. the transistor is **diode‑connected**.\n\n## Is it on, and in what region?\n\nLet $V_X$ be the potential of the top node (the source). Then\n\n$$V_{SG}=V_X ,\\qquad V_{SD}=V_X$$\n\n* It conducts only if $V_{SG} > |V_{TH}|$, i.e. $V_X > |V_{TH}|$.\n* Saturation requires $V_{SD} \\ge V_{SG}-|V_{TH}|$, i.e. $V_X \\ge V_X-|V_{TH}|$ — always true.\n\nSo the device is always in saturation (as any diode‑connected MOSFET is), and\n\n$$I_X=\\tfrac{1}{2}\\mu_pC_{ox}\\frac{W}{L}\\big(V_X-|V_{TH}|\\big)^2(1+\\lambda V_X)$$\n\n## So — current source? **No.**\n\nA current source must deliver a current that is (ideally) *independent* of the voltage across it, i.e. it must present a very high impedance. Here $I_X$ is a strong (square‑law) function of $V_X$:\n\n$$\\frac{\\partial I_X}{\\partial V_X}=\\mu_pC_{ox}\\frac{W}{L}(V_X-|V_{TH}|)=g_m\n\\;\\;\\Rightarrow\\;\\; R_X \\approx \\frac{1}{g_m}\\,\\|\\,r_O \\approx \\frac{1}{g_m}$$\n\nwhich is only hundreds of ohms to a few kilohms. The circuit therefore behaves as a **nonlinear two‑terminal resistor (a \"MOS diode\")**, not a current source. A small change in the terminal voltage produces a large change in current — exactly the opposite of current‑source behavior.\n\n*(Incidentally, if one instead read the top terminal as the drain of an NMOS with its source grounded, the answer would be even simpler: $V_{GS}=0<V_{TH}$, the transistor is off and carries no current at all.)*\n\n**How to fix it:** bias the gate at a fixed voltage relative to a fixed source potential (e.g. source to the supply, gate at a constant bias), and take the *drain* as the output node. Then $V_{GS}$ is constant, $I_D$ is set by the overdrive, and the impedance at the output is $r_O = 1/(\\lambda I_D)$ — large enough to approximate a current source.",
        "format": "markdown",
        "sha256": "2318d56fcabf6fe91d95fa027071ff4cde8750fbf211c8838578a0c325b79b6d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a diode-connected PMOS with its source at the top, and explains that its roughly 1/gm impedance makes it a nonlinear resistor rather than a current source. The extra hypothetical NMOS remark does not change the correct main reasoning.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 576,
        "output_tokens": 5641,
        "total_tokens": 6217,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4711,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 576,
        "output_tokens": 5641,
        "total_tokens": 6217,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4711,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n* **M₁ is a PMOS** (the arrow on the top terminal points *into* the channel → that terminal is the **source**).\n* Source → **R_S** → V_DD  (V_DD is an ac ground)\n* Gate = **V_in**\n* Drain = **V_out** → **R_D** → ground\n\nSo this is a **common‑source stage with source degeneration** (PMOS version): input at the gate, output at the drain, R_S in series with the source.\n\n---\n\n## 2. DC operating point\n\nWith V_in a dc level and M₁ in saturation,\n\n$$V_{SG}=V_{DD}-I_DR_S-V_{in}$$\n\n$$I_D=\\tfrac12\\mu_pC_{ox}\\frac{W}{L}\\Big(V_{DD}-I_DR_S-V_{in}-|V_{TH}|\\Big)^2 ,\\qquad V_{out}=I_DR_D$$\n\n(a quadratic in I_D). Saturation requires |V_DS| ≥ |V_GS| − |V_TH|:\n\n$$V_{DD}-I_D(R_S+R_D)\\;\\ge\\;V_{DD}-I_DR_S-V_{in}-|V_{TH}|\\;\\;\\Longrightarrow\\;\\;\\boxed{V_{out}\\le V_{in}+|V_{TH}|}$$\n\ni.e. the drain may not rise more than |V_TH| above the gate.\n\n---\n\n## 3. Small‑signal analysis\n\nThe small-signal model of a PMOS is identical to that of an NMOS ( i_d = g_m v_gs + v_ds/r_o ), and V_DD → ac ground, so R_S returns to ground.\n\nLet i_d be the signal drain current. Then\n\n$$v_s=i_dR_S,\\qquad v_{out}=-i_dR_D$$\n\n$$i_d=g_m(v_{in}-i_dR_S)+\\frac{(-i_dR_D-i_dR_S)}{r_o}$$\n\n$$\\Rightarrow\\; i_d=\\frac{g_m v_{in}}{1+g_mR_S+\\dfrac{R_S+R_D}{r_o}}$$\n\n**Voltage gain**\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{-g_mR_D}{1+g_mR_S+\\dfrac{R_S+R_D}{r_o}}\n=\\frac{-g_m r_o R_D}{r_o+R_D+(1+g_mr_o)R_S}}$$\n\nIf channel‑length modulation is neglected (r_o → ∞):\n\n$$A_v=-\\frac{g_mR_D}{1+g_mR_S}=-\\frac{R_D}{\\,1/g_m+R_S\\,}$$\n\n(the output is **inverting**, exactly as for an NMOS CS stage).\n\n**Transconductance (degenerated):** $G_m=\\dfrac{g_m}{1+g_mR_S}$\n\n**Input impedance:** $R_{in}=\\infty$ (gate).\n\n**Output impedance** (looking in at V_out with v_in = 0):\n\n$$R_{out}=R_D\\;\\|\\;\\big[r_o(1+g_mR_S)+R_S\\big]$$\n\n---\n\n## 4. Remarks\n\n* R_S acts as **series–series (current) feedback**: it lowers the gain by the factor (1 + g_mR_S) but linearizes the stage and makes the gain ≈ −R_D/R_S (ratio of resistors) when g_mR_S ≫ 1.\n* Since the PMOS n‑well is normally tied to its own source, there is **no body effect**. If instead the well is tied to V_DD, replace g_m by (g_m + g_mb):\n\n$$A_v\\simeq-\\frac{g_mR_D}{1+(g_m+g_{mb})R_S},\\qquad R_{out}=R_D\\|\\big[r_o\\big(1+(g_m+g_{mb})R_S\\big)+R_S\\big]$$",
        "format": "markdown",
        "sha256": "1e505d7aee91536292ea090204d21a480ce1e57989b9a1a50b10203bbdda339e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the required inverting gain; the finite-ro extension is also consistent. The body-tie assumption is a secondary detail.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1560,
        "output_tokens": 4843,
        "total_tokens": 6403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1560,
        "output_tokens": 4843,
        "total_tokens": 6403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n- **M₁ is a PMOS** (arrow into the gate‑side terminal, source at the top).\n- **Source** → up through **R_S** to V_DD\n- **Gate** → the input V_in\n- **Drain** → the output node, and down through **R_D** to ground\n\nSo this is a **common‑source (PMOS) stage with source degeneration** — the PMOS dual of the familiar degenerated NMOS CS amplifier. The input goes to the gate (infinite input resistance at low frequency), the output is taken at the drain, and **the stage is inverting**.\n\nNote the bulk (n‑well) is normally tied to V_DD, not to the source, so the source–bulk junction is reverse biased by I_D R_S → **body effect is present** (g_mb ≠ 0). If the well is strapped to the source, simply set g_mb = 0 below.\n\n## 2. Bias (DC) analysis\n\nThe same current flows through R_S, the channel (source → drain) and R_D:\n\n$$V_{out}=I_DR_D ,\\qquad V_S=V_{DD}-I_DR_S$$\n\n$$I_D=\\tfrac12\\mu_pC_{ox}\\frac{W}{L}\\big(V_{SG}-|V_{TH}|\\big)^2 ,\\qquad V_{SG}=V_{DD}-I_DR_S-V_{in}$$\n\n(one equation in I_D, solved by the quadratic).\n\n**Saturation condition:** V_SD ≥ V_SG − |V_TH| gives\n\n$$V_S-V_{out}\\ \\ge\\ (V_S-V_{in})-|V_{TH}|\\quad\\Longrightarrow\\quad \\boxed{V_{out}\\le V_{in}+|V_{TH}|}$$\n\ni.e. the drain must stay at least |V_TH| below… (more precisely, no more than |V_TH| above) the gate voltage.\n\n## 3. Small‑signal gain\n\nSmall‑signal‑wise a PMOS is identical to an NMOS, and V_DD is an AC ground, so R_S appears from the source to ground (degeneration) and R_D from the drain to ground (load).\n\nKCL at the source and drain nodes (i = channel current, v_s = source voltage):\n\n$$\\frac{v_s}{R_S}=-\\frac{v_{out}}{R_D}\\ \\Rightarrow\\ v_s=-\\frac{R_S}{R_D}v_{out}$$\n\n$$i=g_m(v_{in}-v_s)-g_{mb}v_s+\\frac{v_{out}-v_s}{r_O}=-\\frac{v_{out}}{R_D}$$\n\nEliminating v_s:\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{-g_mR_D}{1+(g_m+g_{mb})R_S+\\dfrac{R_D+R_S}{r_O}}}$$\n\n**Limiting cases**\n\n| Assumption | Gain |\n|---|---|\n| r_O → ∞ | $A_v=\\dfrac{-g_mR_D}{1+(g_m+g_{mb})R_S}$ |\n| r_O → ∞, no body effect | $A_v=\\dfrac{-g_mR_D}{1+g_mR_S}=-\\dfrac{R_D}{\\,R_S+1/g_m\\,}$ |\n| strong degeneration (g_mR_S ≫ 1) | $A_v\\approx-\\dfrac{R_D}{R_S}$ (set by resistor ratio → very linear) |\n\nEquivalently the stage has a **degenerated transconductance**\n\n$$G_m=\\frac{g_m}{1+(g_m+g_{mb})R_S},\\qquad A_v=-G_mR_D$$\n\nIn terms of bias, with g_m = 2I_D/|V_OV|: A_v ≈ −R_D /(R_S + |V_OV|/2I_D).\n\n## 4. Port impedances\n\n- **Input:** $R_{in}=\\infty$ (gate; at high frequency C_GS + Miller‑multiplied C_GD).\n- **Output:** looking into the drain with R_S in the source:\n\n$$R_{drain}=r_O\\big[1+(g_m+g_{mb})R_S\\big]+R_S$$\n\n$$\\boxed{R_{out}=R_D\\parallel\\Big\\{r_O\\big[1+(g_m+g_{mb})R_S\\big]+R_S\\Big\\}\\ \\xrightarrow[\\;r_O\\to\\infty\\;]{}\\ R_D}$$\n\n## 5. Summary / purpose\n\nR_S trades gain for linearity and bias stability: it reduces the effective transconductance by the factor 1 + (g_m+g_mb)R_S, lowers the gain to roughly −R_D/(R_S+1/g_m), raises the resistance seen looking into the drain, widens the input signal swing before distortion, and makes I_D (hence V_out = I_D R_D) much less sensitive to V_TH and μC_ox variations.",
        "format": "markdown",
        "sha256": "7d4db31a3a7966586399951b514ddfbab67ee53137ae95b4e39111f2e496fe29"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a PMOS common-source stage with source degeneration and gives the inverting gain, including valid body-effect and finite-output-resistance refinements.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1560,
        "output_tokens": 4279,
        "total_tokens": 5839,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1560,
        "output_tokens": 4279,
        "total_tokens": 5839,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n* **M₁ is a PMOS** (arrow into the source terminal). Its **source** is the top terminal, tied to V_DD through **R_S**; its **drain** is the bottom terminal, tied to ground through **R_D**.\n* The signal enters at the **gate**, the output is taken at the **drain** → this is a **common‑source stage with source degeneration** (PMOS version). It is an **inverting** amplifier.\n\nBias current path: V_DD → R_S → source‑to‑drain of M₁ → R_D → ground.\n\n---\n\n## 2. DC (large‑signal) operating point\n\nWith M₁ saturated and K ≡ ½ μ_pC_ox(W/L):\n\n$$V_{SG}=\\big(V_{DD}-I_DR_S\\big)-V_{in},\\qquad I_D=K\\big(V_{DD}-V_{in}-I_DR_S-|V_{TH}|\\big)^2$$\n\n$$\\boxed{V_{out}=I_DR_D}$$\n\nSolving the quadratic (let $X = V_{DD}-V_{in}-|V_{TH}|$):\n\n$$I_D=\\frac{(2KR_SX+1)-\\sqrt{4KR_SX+1}}{2KR_S^{\\,2}}$$\n\n**Validity conditions**\n\n* Device on: $V_{in}<V_{DD}-I_DR_S-|V_{TH}|$ (for large V_in, M₁ is off, I_D = 0, V_out = 0).\n* Saturation: $V_{SD}\\ge V_{SG}-|V_{TH}|\\;\\Rightarrow\\; V_{out}\\le V_{in}+|V_{TH}|$.\n\n---\n\n## 3. Small-signal gain\n\nSmall‑signal model: gate = v_in, R_S from source to ac ground, R_D from drain to ac ground (V_DD is ac ground). KCL at source and drain with $i_d=g_mv_{gs}+(v_d-v_s)/r_o$ gives\n\n$$\\frac{v_s}{R_S}=-\\frac{v_d}{R_D}\\quad\\Longrightarrow\\quad\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{-g_mR_D}{1+g_mR_S+\\dfrac{R_S+R_D}{r_o}}\n=\\frac{-g_mr_oR_D}{r_o+R_D+(1+g_mr_o)R_S}}$$\n\nIf channel‑length modulation is neglected ($r_o\\to\\infty$):\n\n$$A_v=-\\frac{g_mR_D}{1+g_mR_S}=-\\frac{R_D}{\\dfrac{1}{g_m}+R_S}$$\n\n(Exactly the result obtained by differentiating the DC equation: $dI_D/dV_{in}=-g_m/(1+g_mR_S)$.)\n\n*If the n‑well is tied to V_DD instead of the source, the source moves with respect to the bulk and body effect appears:*\n$$A_v=-\\frac{(g_m)R_D}{1+(g_m+g_{mb})R_S}$$\n\n---\n\n## 4. Impedances\n\n* **Input:** $R_{in}=\\infty$ (pure gate, at low frequency).\n* **Output (looking into the drain node):**\n\n$$R_{out}=R_D\\,\\|\\,\\Big[r_o+(1+g_mr_o)R_S\\Big]\\;\\xrightarrow[\\;r_o\\to\\infty\\;]{}\\;R_D$$\n\n---\n\n## 5. Interpretation / design notes\n\n| Feature | Effect of R_S |\n|---|---|\n| Gain | Reduced by factor $(1+g_mR_S)$ |\n| Linearity | Improved (local series–series feedback) |\n| Gain accuracy | For $g_mR_S\\gg1$, $A_v\\approx -R_D/R_S$ — set by a resistor ratio, insensitive to g_m, temperature, process |\n| Headroom | Wasted: $I_DR_S$ volts dropped across R_S |\n| Bias stability | R_S provides negative feedback on I_D (as I_D rises, |V_SG| falls) |\n\n**Example:** μ_pC_ox(W/L) = 1 mA/V², |V_TH| = 0.5 V, V_DD = 2.5 V, R_S = 200 Ω, R_D = 1 kΩ, V_in = 1 V ⇒ I_D ≈ 0.82 mA, V_out ≈ 0.82 V (saturation OK since 0.82 < 1 + 0.5), g_m ≈ 1.28 mA/V, so $A_v\\approx-1.28/(1+0.256)\\approx -1.0$.",
        "format": "markdown",
        "sha256": "70c43c7793db10c70903531fa95ee83d23a82ef079b439050b8b7c3c9c4a0e0e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the required inverting gain. The small-signal refinements are consistent with the golden solution.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1560,
        "output_tokens": 4753,
        "total_tokens": 6313,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3155,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1560,
        "output_tokens": 4753,
        "total_tokens": 6313,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3155,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the Topology\n\n- Drain of $M_1$ → $V_{DD}$ (ac ground)\n- Gate → input $V_{in}$\n- Source → output $V_{out}$, degenerated to ground through $R_S$\n\nThe signal enters at the gate and leaves at the source, while the drain is the common (ac‑grounded) terminal ⇒ this is a **common‑drain stage, i.e. a source follower**. $R_S$ serves both as the bias‑current‑setting element and the load.\n\n---\n\n## 2. Bias / Region of Operation\n\nThe drain current flows through $R_S$, so\n\n$$I_D=\\frac{V_{out}}{R_S}$$\n\nM₁ turns on only when $V_{in}>V_{TH}$ (for $V_{in}<V_{TH}$, $I_D=0$ and $V_{out}=0$).\n\n**Saturation check:**\n\n$$V_{DS}\\ge V_{GS}-V_{TH}\\;\\Longrightarrow\\;V_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{TH}\\;\\Longrightarrow\\;V_{in}\\le V_{DD}+V_{TH}$$\n\nSince the input never exceeds $V_{DD}+V_{TH}$ in practice, **the follower is always in saturation when it is on** — this is a key advantage of this stage.\n\n---\n\n## 3. Large‑Signal Transfer Characteristic\n\nWith $k=\\mu_nC_{ox}(W/L)$ and neglecting body effect and channel‑length modulation:\n\n$$\\frac{1}{2}k\\,(V_{in}-V_{out}-V_{TH})^2=\\frac{V_{out}}{R_S}$$\n\nSolving for the overdrive $V_{ov}=V_{in}-V_{out}-V_{TH}$:\n\n$$V_{ov}=\\frac{-1+\\sqrt{1+2kR_S(V_{in}-V_{TH})}}{kR_S},\\qquad \n\\boxed{V_{out}=V_{in}-V_{TH}-V_{ov}}$$\n\nDifferentiating gives the incremental gain:\n\n$$\\frac{dV_{out}}{dV_{in}}=1-\\frac{1}{\\sqrt{1+2kR_S(V_{in}-V_{TH})}}\\;<1$$\n\nSo $V_{out}$ **tracks $V_{in}$ with a dc level shift of one $V_{GS}$**, the slope rising from 0 (just at turn‑on, where $g_m\\to0$) toward 1 at high currents.\n\n---\n\n## 4. Small‑Signal Analysis\n\nReplacing $M_1$ by $g_m v_{gs}$, $g_{mb}v_{bs}$ and $r_O$ (with $v_{gs}=v_{in}-v_{out}$, $v_{bs}=-v_{out}$):\n\n$$g_m(v_{in}-v_{out})=v_{out}\\left(g_{mb}+\\frac{1}{r_O}+\\frac{1}{R_S}\\right)$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_m}{g_m+g_{mb}+\\dfrac{1}{r_O}+\\dfrac{1}{R_S}}\n=\\frac{g_m(R_S\\|r_O)}{1+(g_m+g_{mb})(R_S\\|r_O)}}$$\n\nSimplified ($r_O\\to\\infty$, no body effect):\n\n$$A_v=\\frac{g_mR_S}{1+g_mR_S}<1$$\n\n**Gain is always less than unity** — the stage provides no voltage gain, only current/power gain.\n\n---\n\n## 5. Impedances\n\n| | Result |\n|---|---|\n| **Input resistance** | $R_{in}=\\infty$ (gate is capacitive; at high frequency $C_{in}\\approx C_{GD}+(1-A_v)C_{GS}$, which is small) |\n| **Output resistance** | $R_{out}=\\dfrac{1}{g_m+g_{mb}}\\;\\big\\|\\;r_O\\;\\big\\|\\;R_S\\;\\approx\\dfrac{1}{g_m}$ |\n\nHigh input impedance + low output impedance ⇒ the circuit is a **voltage buffer / level shifter**, used to drive small resistive or capacitive loads without loading the preceding stage.\n\n---\n\n## 6. Non‑Idealities\n\n1. **Body effect** (source is at $V_{out}\\neq 0$): $V_{TH}=V_{TH0}+\\gamma\\!\\left(\\sqrt{2\\phi_F+V_{out}}-\\sqrt{2\\phi_F}\\right)$. With $\\eta=g_{mb}/g_m\\approx0.2$, the gain saturates at $A_v\\le 1/(1+\\eta)\\approx0.8$ even for $g_mR_S\\gg1$. It also makes the characteristic nonlinear.\n2. **Nonlinearity:** $I_D$ (hence $g_m$ and $1/g_m$) varies with the signal, since $I_D=V_{out}/R_S$. For a large downward swing the current collapses and $R_{out}$ rises → poor sinking capability (this is why a current source is usually used in place of $R_S$).\n3. **Headroom:** the output is limited to $V_{out,\\max}=V_{in,\\max}-V_{GS}$ and cannot go below 0; the $V_{GS}$ drop consumes voltage headroom.\n\n---\n\n## 7. Numerical Example\n\nLet $k=1\\ \\text{mA/V}^2$, $V_{TH}=0.5$ V, $R_S=1\\ \\text{k}\\Omega$, $V_{in}=1.5$ V:\n\n- $V_{ov}=\\left(-1+\\sqrt{1+2(1)(1)}\\right)/1=0.73\\ \\text{V}$\n- $V_{out}=1.5-0.5-0.73=0.27\\ \\text{V}$, $I_D=0.27$ mA\n- $g_m=kV_{ov}=0.73\\ \\text{mA/V}$ → $A_v=\\dfrac{0.73}{1+0.73}=0.42$, $R_{out}\\approx1/g_m\\|R_S=0.58\\ \\text{k}\\Omega$\n\n(The gain is modest here because $g_mR_S$ is small; increasing $W/L$ or $R_S$ pushes $A_v\\to1$.)",
        "format": "markdown",
        "sha256": "a397e6c1e65128287f88b6edb75976ac706cf3fd57c6a2e5b65d58f2e9ce4bb7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the required simplified expression. The additional small-signal refinements are also consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1264,
        "output_tokens": 4175,
        "total_tokens": 5439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1999,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1264,
        "output_tokens": 4175,
        "total_tokens": 5439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1999,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n| Terminal | Connection |\n|---|---|\n| Drain of M₁ | V_DD (AC ground) |\n| Gate of M₁ | V_in (signal input) |\n| Source of M₁ | V_out, loaded by R_S to ground |\n\nThe signal enters at the gate and leaves at the source, while the **drain is the AC‑grounded (common) terminal** → this is a **common‑drain stage, i.e. a source follower (voltage buffer / level shifter)**. R_S is both the bias element (it sets I_D) and the load.\n\n---\n\n## 2. Region of operation\n\nWith the drain tied to V_DD:\n\n$$V_{DS}=V_{DD}-V_{out},\\qquad V_{GS}=V_{in}-V_{out}$$\n\nSaturation requires $V_{DS} \\ge V_{GS}-V_{TH}$:\n\n$$V_{DD}-V_{out}\\;\\ge\\;V_{in}-V_{out}-V_{TH}\\;\\Longrightarrow\\;V_{DD}\\ge V_{in}-V_{TH}$$\n\nThe output level cancels out — **M₁ stays in saturation for any V_in up to V_DD + V_TH**. (For $V_{in}<V_{TH}$ the device is off and $V_{out}=0$, since R_S pulls the source to ground.)\n\n---\n\n## 3. Large‑signal transfer characteristic\n\nFor $V_{in}>V_{TH}$, the drain current flows entirely through R_S:\n\n$$\\tfrac12\\mu_nC_{ox}\\frac{W}{L}\\big(V_{in}-V_{out}-V_{TH}\\big)^2=\\frac{V_{out}}{R_S}$$\n\nLetting $k=\\tfrac12\\mu_nC_{ox}(W/L)$ and $V_{OV}=V_{in}-V_{out}-V_{TH}$:\n\n$$V_{OV}=\\frac{-1+\\sqrt{1+4kR_S\\,(V_{in}-V_{TH})}}{2kR_S},\\qquad \n\\boxed{V_{out}=V_{in}-V_{TH}-V_{OV}}$$\n\nSo the output **follows** the input, shifted down by one gate–source voltage, $V_{out}=V_{in}-V_{GS}$. The curve starts at zero (M₁ off), is initially very nonlinear (small I_D, small g_m), and asymptotically approaches a slope close to unity as I_D grows.\n\n---\n\n## 4. Small‑signal gain\n\nWith the body tied to ground, $v_{bs}=-v_{out}$, so the body transconductance *opposes* the gain. KCL at the output node:\n\n$$g_m(v_{in}-v_{out})-g_{mb}v_{out}-\\frac{v_{out}}{r_O}=\\frac{v_{out}}{R_S}$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_m}{g_m+g_{mb}+\\dfrac{1}{r_O}+\\dfrac{1}{R_S}}\n=\\frac{g_m\\,(r_O\\|R_S)}{1+(g_m+g_{mb})(r_O\\|R_S)}}$$\n\nNeglecting channel‑length modulation:\n\n$$A_v=\\frac{g_mR_S}{1+(g_m+g_{mb})R_S}\\;\\xrightarrow[\\;g_mR_S\\gg1\\;]{}\\;\\frac{g_m}{g_m+g_{mb}}=\\frac{1}{1+\\eta}\\approx 0.8-0.9$$\n\n**The gain is positive (non‑inverting) but always less than 1** — body effect caps it at ≈ 1/(1+η), η = g_mb/g_m ≈ 0.1–0.2, even with R_S → ∞.\n\n---\n\n## 5. Port impedances\n\n* **Input:** $R_{in}=\\infty$ at low frequency (gate is capacitive) — the stage does not load the previous stage.\n* **Output (looking into the source, V_in AC‑grounded):**\n\n$$R_{out}=\\frac{1}{g_m+g_{mb}}\\;\\Big\\|\\;r_O\\;\\Big\\|\\;R_S\\;\\approx\\;\\frac{1}{g_m}$$\n\nHigh R_in + low R_out = **voltage buffer**: it can drive a small resistive/capacitive load without the gain collapsing.\n\n---\n\n## 6. Practical remarks\n\n**Good points**\n- Unity‑ish, non‑inverting gain with very low output resistance → impedance transformation.\n- Wide bandwidth: no Miller multiplication; C_GS is \"bootstrapped\" (both ends move together), so the input capacitance is only ≈ C_GD + (1−A_v)C_GS.\n- Convenient **DC level shift** of one V_GS (useful between stages).\n\n**Drawbacks**\n- $A_v<1$ always; body effect makes it signal‑dependent (V_TH rises with V_out), causing **nonlinearity/distortion**, unless the bulk can be tied to the source (triple well / PMOS version).\n- **Asymmetric drive:** M₁ can only *source* current; the maximum sinking current is limited to $V_{out}/R_S$. Fast negative‑going edges into a capacitive load slew‑limit (replace R_S by a current source for better linearity/headroom).\n- **Headroom loss:** $V_{out,max}=V_{DD}-V_{GS}$, and the output never goes below 0, so the swing is squeezed at both ends.\n- Driving a large capacitive load while fed from an inductive/high‑Z source can produce a negative input resistance → ringing or oscillation.\n\n---\n\n## 7. Numerical example\n\nTake $\\mu_nC_{ox}(W/L)=1\\ \\mathrm{mA/V^2}$ (k = 0.5 mA/V²), $V_{TH}=0.5$ V, $R_S=10\\ \\mathrm{k\\Omega}$, $V_{in}=1.2$ V, η = 0.15:\n\n- $V_{OV}=\\dfrac{-1+\\sqrt{1+4(5)(0.7)}}{10}=0.287\\ \\mathrm V$\n- $V_{out}=0.7-0.287=0.41\\ \\mathrm V$, $I_D=41\\ \\mu\\mathrm A$\n- $g_m=2I_D/V_{OV}=0.29\\ \\mathrm{mS}$, $g_mR_S=2.9$\n- $A_v=\\dfrac{2.9}{1+1.15(2.9)}=0.67$ (0.74 if body effect is ignored)\n- $R_{out}=\\dfrac{1}{1.15\\,g_m}\\,\\|\\,R_S=3.0\\ \\mathrm{k\\Omega}\\,\\|\\,10\\ \\mathrm{k\\Omega}\\approx2.3\\ \\mathrm{k\\Omega}$\n\ni.e. a non‑inverting buffer with ≈ 0.7 V/V gain, infinite input resistance and ~2 kΩ output resistance.",
        "format": "markdown",
        "sha256": "0e3e79acd35f24443005461c740f8f5b10e90f69df781f4a673d64868c414653"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, sub-unity gain, with body-effect and output-resistance refinements that are consistent with the topology.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1264,
        "output_tokens": 4830,
        "total_tokens": 6094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2438,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1264,
        "output_tokens": 4830,
        "total_tokens": 6094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2438,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n- Drain of **M₁** is tied to **V_DD** → drain is an AC ground.\n- Signal enters at the **gate**, output is taken at the **source** across **R_S**.\n\n→ This is a **common‑drain stage, i.e. a source follower (voltage buffer / level shifter)** with a resistive source (tail) load.\n\n---\n\n## 2. Large‑signal (DC) behaviour\n\n**Cut‑off:** for V_in < V_TH, M₁ is off, I_D = 0, and\n\n$$V_{out}=0$$\n\n**Conduction:** for V_in > V_TH the source voltage rises so that the current pulled by R_S equals I_D. With\nk ≡ ½ μ_nC_ox(W/L) and channel‑length modulation neglected:\n\n$$k\\,(V_{in}-V_{out}-V_{TH})^{2}=\\frac{V_{out}}{R_S}$$\n\nSolving the quadratic (keeping the physical root), with the overdrive V_ov = V_GS − V_TH:\n\n$$V_{ov}=\\frac{\\sqrt{1+4kR_S\\,(V_{in}-V_{TH})}-1}{2kR_S},\\qquad \n\\boxed{V_{out}=V_{in}-V_{TH}-V_{ov}}$$\n\nSo the output **follows** the input, shifted down by one V_GS (≈ V_TH + V_ov). The shift is *not* constant – V_GS grows as I_D grows – which is the source of the follower's gain error and distortion.\n\n**Region check:** M₁ stays saturated as long as\nV_DS ≥ V_GS − V_TH ⟹ V_DD − V_out ≥ V_in − V_out − V_TH ⟹ **V_in ≤ V_DD + V_TH**,\ni.e. the device remains in saturation for the whole useful input range (the gate may even exceed V_DD). Maximum output ≈ V_DD − V_GS.\n\n---\n\n## 3. Small‑signal analysis\n\nModel: gate = v_in, drain = AC ground, source = v_out; body tied to ground so v_bs = −v_out (body effect is **active** here).\n\nKCL at the source node:\n\n$$g_m(v_{in}-v_{out})-g_{mb}v_{out}-\\frac{v_{out}}{r_o}=\\frac{v_{out}}{R_S}$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_m}{g_m+g_{mb}+\\dfrac{1}{r_o}+\\dfrac{1}{R_S}}\n=\\frac{g_m\\,(R_S\\|r_o)}{1+(g_m+g_{mb})(R_S\\|r_o)}}$$\n\nSimplifications:\n\n| Assumption | Gain |\n|---|---|\n| r_o → ∞ | A_v = g_mR_S /[1+(g_m+g_mb)R_S] |\n| No body effect, r_o → ∞ | A_v = g_mR_S /(1+g_mR_S) |\n| R_S, r_o → ∞ | A_v = g_m/(g_m+g_mb) = 1/(1+η) ≈ 0.8–0.9 |\n\n**Key point:** |A_v| < 1 always. Even with a very large R_S the gain saturates at 1/(1+η) (η = g_mb/g_m ≈ 0.1–0.25) because of the body effect. (Consistency check: differentiating the large‑signal result gives dV_out/dV_in = 1 − 1/√(1+4kR_S(V_in−V_TH)) = g_mR_S/(1+g_mR_S). ✔)\n\n**Impedances**\n\n$$R_{in}=\\infty \\;(\\text{low frequency, gate is capacitive only})$$\n\n$$R_{out}=\\frac{1}{g_m+g_{mb}}\\;\\Big\\|\\;r_o\\;\\Big\\|\\;R_S\\;\\approx\\;\\frac{1}{g_m+g_{mb}}$$\n\n*Numerical example:* g_m = 1 mS, g_mb = 0.2 mS, r_o = 50 kΩ, R_S = 5 kΩ\n→ A_v = 1/(1+0.2+0.02+0.2) = **0.70**, R_out ≈ 1/1.2 mS ‖ 5 k ‖ 50 k ≈ **0.75 kΩ**.\n\n---\n\n## 4. Frequency response (qualitative)\n\n- C_GD connects gate to V_DD (AC ground) → appears in full at the input.\n- C_GS sees (1 − A_v) → **bootstrapped**, so its contribution is small.\n- Output pole: ≈ 1/[R_out(C_L + C_SB)] — low, because R_out is small.\n→ Wide bandwidth, hence its use as a buffer.\n\n---\n\n## 5. Summary / character of the stage\n\n**Pros**\n- High (ideally infinite) input resistance, low output resistance ⇒ good **voltage buffer** between a high‑impedance stage and a heavy/low‑impedance load.\n- DC **level shift** down by one V_GS.\n- Non‑inverting, broadband.\n\n**Cons**\n- Voltage gain < 1 (no voltage amplification; it provides current/power gain).\n- **Body effect** degrades the gain and makes it signal‑dependent → nonlinearity/distortion.\n- Current is **sourced** through M₁ but can only be **sunk** through R_S ⇒ asymmetric drive; for fast negative‑going outputs the slew rate is limited to V_out/(R_SC_L). Using a current source instead of R_S (and tying the bulk to the source, if the technology allows) fixes gain and linearity.\n- Consumes headroom: V_out,max ≈ V_DD − V_GS.",
        "format": "markdown",
        "sha256": "3cd51e0ffdb00e53760d7d65137cae04b225a90bb0f2c936efe507b82bb5be32"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, sub-unity gain, including the golden expression as a simplified case. The body-effect and output-resistance refinements are also appropriate.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1264,
        "output_tokens": 4547,
        "total_tokens": 5811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2581,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1264,
        "output_tokens": 4547,
        "total_tokens": 5811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2581,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identify the topology\n\nLook at where each terminal goes:\n\n| Terminal of M₁ | Connected to |\n|---|---|\n| Gate | V_DD (a **dc** node → ac ground) |\n| Source (arrow, bottom) | V_in |\n| Drain (top) | V_out, through R_D to V_DD |\n\nThe gate is held at a constant potential, the signal enters at the **source**, and the output is taken at the **drain**:\n\n> **This is a common‑gate (CG) stage** — a *non‑inverting* amplifier, not a common‑source stage.\n\n---\n\n## 2. Large‑signal / bias behaviour\n\nSince V_G = V_DD,\n\n$$V_{GS}=V_{DD}-V_{in},\\qquad V_{DS}=V_{out}-V_{in}$$\n\n* **Cut‑off:** if $V_{in} > V_{DD}-V_{TH}$ → $I_D=0$, $V_{out}=V_{DD}$.\n* **Saturation:**\n\n$$I_D=\\tfrac12\\mu_nC_{ox}\\frac{W}{L}\\,(V_{DD}-V_{in}-V_{TH})^2$$\n\n$$\\boxed{V_{out}=V_{DD}-\\tfrac12\\mu_nC_{ox}\\frac{W}{L}R_D\\,(V_{DD}-V_{in}-V_{TH})^2}$$\n\nNote that as V_in **rises**, V_GS falls, I_D falls and V_out **rises** → the stage is non‑inverting, as expected for a CG amplifier.\n\n**Saturation condition:**\n\n$$V_{DS}\\ge V_{GS}-V_{TH}\\;\\Rightarrow\\;V_{out}-V_{in}\\ge V_{DD}-V_{in}-V_{TH}\\;\\Rightarrow\\;\\boxed{V_{out}\\ge V_{DD}-V_{TH}}$$\n\ni.e. the dc drop across R_D may not exceed V_TH: $I_DR_D\\le V_{TH}$. (Interesting consequence: the drain‑bias freedom of this stage is very limited.)\n\n---\n\n## 3. Small‑signal analysis (λ = 0, body effect neglected)\n\nWith $v_g=0$ and $v_s=v_{in}$:\n\n$$i_d=g_m v_{gs}=-g_mv_{in},\\qquad v_{out}=-R_D i_d$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=+g_mR_D},\\qquad g_m=\\mu_nC_{ox}\\frac{W}{L}(V_{DD}-V_{in}-V_{TH})=\\sqrt{2\\mu_nC_{ox}\\tfrac{W}{L}I_D}$$\n\nImpedances:\n\n$$R_{in}=\\frac{1}{g_m}\\ \\ (\\text{low — looking into the source}),\\qquad R_{out}=R_D\\ (\\;=R_D\\|r_O\\ \\text{if }\\lambda\\neq0)$$\n\n**Gain ceiling imposed by the bias constraint:** using $I_DR_D\\le V_{TH}$ and $g_m = 2I_D/V_{ov}$,\n\n$$|A_v| = g_mR_D=\\frac{2I_DR_D}{V_{ov}}\\le\\frac{2V_{TH}}{V_{GS}-V_{TH}}$$\n\nso the circuit cannot provide a large gain unless the overdrive is very small.\n\n---\n\n## 4. Refinements\n\n* **Body effect** (bulk at ground, source at V_in ⇒ $v_{bs}=-v_{in}$): $g_m \\to g_m+g_{mb}$\n\n $$A_v=(g_m+g_{mb})R_D,\\qquad R_{in}=\\frac{1}{g_m+g_{mb}}$$\n\n* **Channel‑length modulation** (ideal input source, so $R_S=0$):\n\n $$A_v=\\frac{\\big[1+(g_m+g_{mb})r_O\\big]R_D}{r_O+R_D}\\;\\xrightarrow[r_O\\to\\infty]{}\\;(g_m+g_{mb})R_D$$\n\n* **Practical note:** because $R_{in}=1/(g_m+g_{mb})$ is small, the driving source must deliver the entire bias current I_D and must have low output resistance; with a source resistance R_S the gain degrades to $A_v=R_D/\\big(R_S+1/(g_m+g_{mb})\\big)$.",
        "format": "markdown",
        "sha256": "bd7df7f8fc575def6b75ddfd139cb9fbc93235f35f77cdbd0bb2c3fc9983fdec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate, source-input topology and derives the non-inverting gain and low input resistance. The additional bias and small-signal analyses are consistent with the stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1233,
        "output_tokens": 6427,
        "total_tokens": 7660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1233,
        "output_tokens": 6427,
        "total_tokens": 7660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\nTrace the three terminals of **M₁**:\n\n| Terminal | Connection |\n|---|---|\n| Gate | tied directly to **V_DD** (the wire on the right) |\n| Source (arrow) | driven by **V_in** |\n| Drain | node **V_out**, pulled up to V_DD through **R_D** |\n\nSo the signal enters the **source**, leaves the **drain**, and the gate is held at a constant potential (V_DD = ac ground).\n\n> **This is a common‑gate (CG) stage**, biased in a rather crude way: the gate is tied to the supply instead of to a separate bias network, so the input source must supply both the dc level and the signal.\n\n(Note it must be an NMOS: if the bottom terminal were a PMOS source we would need V_in > V_DD + |V_TH|, which is impossible.)\n\n## 2. Bias point / region of operation\n\nWith V_G = V_DD and V_S = V_in:\n\n$$V_{GS}=V_{DD}-V_{in}, \\qquad V_{DS}=V_{out}-V_{in}$$\n\n$$I_D=\\tfrac12\\mu_nC_{ox}\\frac{W}{L}\\,(V_{DD}-V_{in}-V_{TH})^2 ,\\qquad V_{out}=V_{DD}-I_DR_D$$\n\n*Conduction:* V_in < V_DD − V_TH (otherwise M₁ is off and V_out = V_DD).\n\n*Saturation:* V_DS > V_GS − V_TH\n\n$$V_{out}-V_{in}>V_{DD}-V_{in}-V_{TH}\\;\\Longrightarrow\\;\\boxed{V_{out}>V_{DD}-V_{TH}}\\;\\Longleftrightarrow\\;I_DR_D<V_{TH}$$\n\n**The dc drop across R_D cannot exceed one threshold voltage** – this is the key drawback of tying the gate to V_DD.\n\nLarge‑signal behaviour: as V_in ↑ → V_GS ↓ → I_D ↓ → V_out ↑ , i.e. the stage is **non‑inverting**.\n\n## 3. Small‑signal analysis\n\nGate and bulk are ac grounds; the source carries v_in, so v_gs = v_bs = −v_in.\n\n**Neglecting r_O and body effect**\n\n$$i_d=g_mv_{gs}=-g_mv_{in}\\;\\Rightarrow\\;v_{out}=-i_dR_D=g_mR_Dv_{in}$$\n\n$$\\boxed{A_v=+g_mR_D}\\qquad R_{in}=\\frac{1}{g_m}\\qquad R_{out}=R_D$$\n\n**Including body effect and channel‑length modulation**\n\n$$A_v=\\bigl[(g_m+g_{mb})+\\tfrac{1}{r_O}\\bigr](R_D\\|r_O)=\\frac{\\bigl[1+(g_m+g_{mb})r_O\\bigr]R_D}{R_D+r_O}$$\n\n$$R_{in}=\\frac{R_D+r_O}{1+(g_m+g_{mb})r_O}\\;\\xrightarrow[r_O\\to\\infty]{}\\;\\frac{1}{g_m+g_{mb}}$$\n\n$$R_{out}=R_D\\,\\|\\,\\bigl[r_O+(1+(g_m+g_{mb})r_O)R_S\\bigr]\\;\\xrightarrow[R_S=0]{}\\;R_D\\|r_O$$\n\nIf the source has an output resistance R_S, the overall gain degrades to\n\n$$\\frac{v_{out}}{v_{sig}}\\simeq\\frac{R_D}{R_S+\\dfrac{1}{g_m+g_{mb}}}$$\n\nbecause of the low input impedance.\n\n## 4. The gain ceiling imposed by V_G = V_DD\n\nUsing g_m = 2I_D/(V_GS − V_TH) together with I_D R_D < V_TH:\n\n$$A_v=g_mR_D=\\frac{2I_DR_D}{V_{GS}-V_{TH}}<\\frac{2V_{TH}}{V_{DD}-V_{in}-V_{TH}}$$\n\nSo, e.g. with V_TH = 0.4 V and an overdrive of 0.4 V, the gain can never exceed ≈ 2. Raising the gain requires a larger I_D R_D, which immediately pushes M₁ into the triode region.\n\n## 5. Summary\n\n* **Function:** common‑gate (non‑inverting) voltage amplifier / current buffer.\n* **Gain:** A_v ≈ +(g_m + g_mb)R_D (positive, no phase inversion).\n* **Impedances:** low input (≈ 1/(g_m+g_mb)) — good for matching to a 50 Ω line or for cascoding; high output (R_D ‖ r_O).\n* **Bandwidth:** no Miller multiplication of C_GD (gate is ac‑grounded), hence its use at high frequencies.\n* **Weakness of this particular biasing:** since V_G is pinned at V_DD, the bias current depends on the dc level of V_in, the headroom condition forces I_D R_D < V_TH, and the achievable gain and output swing are therefore very small. A practical design puts a separate bias voltage on the gate (with a bypass capacitor) and ac‑couples V_in to the source.",
        "format": "markdown",
        "sha256": "cc02c65e04c87e2e7f8a6153920ae881ed8710b6fb7665c7c9cacbb81d7f1858"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven, gate-grounded common-gate stage and gives the non-inverting gain and low input resistance. The additional small-signal and bias analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1233,
        "output_tokens": 6846,
        "total_tokens": 8079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5021,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1233,
        "output_tokens": 6846,
        "total_tokens": 8079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5021,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Recognizing the topology\n\n* The **gate of M₁ is tied directly to V_DD** → since V_DD is a *small‑signal ground*, the gate is an **ac ground**.\n* The **input is applied to the source**.\n* The **output is taken at the drain**, which is loaded by R_D to V_DD.\n\n→ This is a **common‑gate (CG) stage** (non‑inverting voltage amplifier / current buffer), not a common‑source stage.\n\n```\n          V_DD\n           │\n          R_D\n           │\n           ├──── v_out\n           │\n      ┌────┤ D\n G ───┤ M1 │        (G tied to V_DD = ac ground)\n      └────┤ S\n           │\n         v_in\n```\n\n## 2. Bias (large‑signal) analysis\n\nWith V_G = V_DD and V_S = V_in:\n\n$$V_{GS}=V_{DD}-V_{in},\\qquad I_D=\\tfrac12\\mu_nC_{ox}\\frac{W}{L}\\left(V_{DD}-V_{in}-V_{TH}\\right)^2 ,\\qquad V_{out}=V_{DD}-I_DR_D$$\n\n**Turn‑on condition:** V_in < V_DD − V_TH.\n\n**Saturation condition:** V_DS ≥ V_GS − V_TH ⟹ V_D ≥ V_G − V_TH = V_DD − V_TH, i.e.\n\n$$\\boxed{I_D R_D \\le V_{TH}}$$\n\nThis is the key weakness of the circuit: because the gate sits at the *supply*, the drain may fall at most V_TH below V_DD before M₁ enters the triode region. Note also the (non‑intuitive) behaviour: for **small** V_in, V_GS is large, I_D is large, and the device is in **triode**; only when V_in rises to within ≈ √(2V_TH/k R_D) of V_DD − V_TH does it enter saturation. Increasing V_in *reduces* I_D and *raises* V_out → **non‑inverting**.\n\n## 3. Small‑signal analysis (gate and bulk at ac ground, source = input)\n\nWith v_gs = −v_in and v_bs = −v_in:\n\n**Voltage gain (λ = 0):**\n$$A_v=\\frac{v_{out}}{v_{in}}=+g_mR_D \\quad\\big(\\;=(g_m+g_{mb})R_D \\text{ if the bulk is not tied to the source}\\big)$$\n\n**Including channel‑length modulation:**\n$$A_v=\\frac{\\big[(g_m+g_{mb})r_o+1\\big]R_D}{r_o+R_D}$$\n\n**Input resistance (looking into the source):**\n$$R_{in}=\\frac{r_o+R_D}{1+(g_m+g_{mb})r_o}\\;\\approx\\;\\frac{1}{g_m+g_{mb}}\\quad(\\text{low!})$$\n\n**Output resistance (ideal input source):** R_out = R_D ∥ r_o ≈ R_D.\n\n**With a finite source resistance R_S:**\n$$A_v=\\frac{R_D}{R_S+\\dfrac{1}{g_m+g_{mb}}}$$\n\n## 4. Interpretation / limitations\n\n1. **Gain is severely limited by the bias constraint.** Using g_m = 2I_D/V_OV,\n $$A_v=g_mR_D=\\frac{2I_DR_D}{V_{OV}}\\le\\frac{2V_{TH}}{V_{OV}}$$\n e.g. V_TH = 0.4 V, V_OV = 0.2 V ⇒ A_v ≤ 4. Any attempt to raise the gain (larger I_D R_D) pushes M₁ into triode, where it degenerates into a voltage‑controlled resistor and the circuit becomes a mere resistive divider.\n2. **No bias flexibility and no DC path at the input.** V_GS is set entirely by the DC level of V_in, so the input source must both define the bias point and sink I_D. If the input were ac‑coupled, the source node would float and M₁ would be off. A practical CG stage therefore uses a *separate* gate bias (below V_DD) plus a resistor or current source from the source to ground, with a coupling capacitor at the input.\n3. **Low input impedance (≈1/g_m)** — bad for a high‑impedance (voltage) source, but useful as a **current buffer** or for **50‑Ω input matching** (e.g., RF LNAs, cascode stages).\n4. **Output swing** is restricted to V_DD − V_TH ≤ V_out ≤ V_DD for proper (saturation) operation.\n\n**Summary:** the circuit is a non‑inverting common‑gate amplifier with A_v ≈ (g_m+g_mb)R_D, R_in ≈ 1/(g_m+g_mb), R_out ≈ R_D ∥ r_o, but tying the gate to V_DD forces I_D R_D ≤ V_TH, so it is a poorly biased, low‑gain, low‑swing amplifier in practice.",
        "format": "markdown",
        "sha256": "75344a25b1a98b2aa174f90e2141206a74de571bf1e1702310f2ee942a5353b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the correct non-inverting gain and low input resistance, including the effect of ro. The additional bias analysis is mostly consistent; its body-effect wording is slightly inconsistent but does not affect the essential result.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1233,
        "output_tokens": 9476,
        "total_tokens": 10709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7758,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1233,
        "output_tokens": 9476,
        "total_tokens": 10709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7758,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the Topology\n\nAt first glance this looks like a **common‑gate stage**: the gate is held at a DC bias $V_b$, the drain feeds $R_D$ up to $V_{DD}$, the output is taken at the drain, and the signal is coupled into the **source** through $C_1$.\n\nBut look carefully at the source node: it is **tied directly to ground** (the ground symbol under $M_1$) *as well as* to $C_1$.\n\n## DC Operating Point\n\nThe DC bias is perfectly fine, because $C_1$ blocks DC:\n\n$$V_{GS}=V_b,\\qquad I_D=\\tfrac12\\mu_nC_{ox}\\frac{W}{L}\\left(V_b-V_{TH}\\right)^2$$\n$$V_{out}=V_{DD}-I_DR_D \\quad\\text{(saturation requires } V_{out}\\ge V_b-V_{TH})$$\n\nSo the transistor is properly biased and carries current.\n\n## Small‑Signal Analysis\n\nFor the signal, set $V_{DD}\\to 0$ and $V_b\\to 0$ (DC bias sources are AC grounds):\n\n* Gate: AC ground (ideal bias $V_b$)\n* Source: **hard ground** (the wire to ground)\n\nTherefore\n\n$$v_{gs}=0,\\qquad v_{bs}=0\\ \\Rightarrow\\ g_mv_{gs}=0,\\quad g_{mb}v_{bs}=0$$\n\nThe only elements left at the output node are $R_D$ and $r_O$ going to ground, with **no** controlled current source driving them. Hence\n\n$$\\boxed{\\,v_{out}=0\\quad\\Rightarrow\\quad A_v=\\frac{v_{out}}{v_{in}}=0\\,}$$\n\n**Why:** the ideal ground at the source node holds that node at zero volts for *any* input. The signal delivered through $C_1$ is simply shunted to ground — $V_{in}$ merely drives the capacitor ($Z_{in}=1/sC_1$) and none of it appears across $V_{GS}$. The \"input\" of the common-gate stage has been short‑circuited.\n\n## How to Fix It\n\nRemove the direct ground at the source and bias $M_1$ instead with a current source (or a resistor $R_S$ bypassed only for DC, or a source resistor returned to a negative supply). Then the stage becomes a true common‑gate amplifier:\n\n$$A_v=(g_m+g_{mb})\\,(R_D\\|r_O)\\quad\\text{(low-frequency, with }C_1\\text{ shorted)}$$\n\nor, including $r_O$ exactly with an ideal input source,\n\n$$A_v=\\frac{\\big[1+(g_m+g_{mb})r_O\\big]R_D}{R_D+r_O},\\qquad R_{in}=\\frac{R_D+r_O}{1+(g_m+g_{mb})r_O}$$\n\n**Conclusion:** as drawn, the circuit is correctly biased but provides **zero gain** — it is not an amplifier at all.",
        "format": "markdown",
        "sha256": "2a3cf7d6f2510c63cd5c8b630b5233e1de5fce03ca4fee30706150732d9f5324"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input produces no source signal and the ideal small-signal voltage gain is zero. The additional bias and repair discussion does not undermine the essential conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1904,
        "output_tokens": 2587,
        "total_tokens": 4491,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1904,
        "output_tokens": 2587,
        "total_tokens": 4491,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Reading the topology\n\n- **M₁** has its **drain** at the top (tied to V_DD through R_D and to V_out),\n- its **gate** tied to the dc bias **V_b**,\n- its **source** at the bottom node — and that bottom node is **tied directly to ground** (the ground symbol under the node) while also receiving V_in through C₁.\n\nSo the signal is being injected at the *source* (it looks like a common‑gate stage), but the source node is simultaneously **shorted to ground by a wire**.\n\n## DC operating point (this part is fine)\n\nC₁ blocks dc, so the bias is unaffected by the source V_in:\n\n$$V_{GS}=V_b,\\qquad I_D=\\tfrac12\\mu_nC_{ox}\\frac{W}{L}(V_b-V_{TH})^2,\\qquad V_{out}=V_{DD}-R_DI_D$$\n\nwith the saturation requirement $V_{out}\\ge V_b-V_{TH}$. In other words, M₁ is properly biased as a grounded‑source device.\n\n## Small‑signal analysis\n\nFor ac purposes:\n\n- V_b is a dc bias ⇒ **gate is an ac ground**,\n- the source is **hard‑wired to ground** ⇒ **source is an ac ground**.\n\nTherefore\n\n$$v_{gs}=v_g-v_s=0-0=0\\;\\Longrightarrow\\;g_mv_{gs}=0$$\n\nNo controlled current flows, so no current flows in R_D (r_O also connects drain to ground, carrying no current), and\n\n$$\\boxed{v_{out}=0,\\qquad A_v=\\frac{v_{out}}{v_{in}}=0}$$\n\n**Physically:** the current that V_in pushes through C₁ simply returns to ground through the short at the source node; none of it enters the transistor. V_in only \"sees\" the impedance $1/(sC_1)$ to ground — it loads the source but produces no signal in the amplifier.\n\n## Fix\n\nRemove the ground connection at the source and bias M₁ with a current source (or a resistor) to ground. Then it becomes a true **common‑gate stage**:\n\n$$R_{in}\\approx\\frac{1}{g_m},\\qquad A_v\\approx g_mR_D \\;(>0)$$\n\n(including body effect, $A_v=(g_m+g_{mb})R_D$ for $\\lambda=0$).",
        "format": "markdown",
        "sha256": "693a3f6df2bf2f6185fdcf3eb98c7c50f1dd843be0ba335c1a42c181119c12ad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer correctly identifies the source node’s hard short to ground, so the input produces no small-signal source voltage and the ideal voltage gain is zero. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1904,
        "output_tokens": 2799,
        "total_tokens": 4703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2004,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1904,
        "output_tokens": 2799,
        "total_tokens": 4703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2004,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\nAt first glance this looks like a **common‑gate stage**: the gate is held at a DC bias $V_b$, the drain drives $V_{out}$ through $R_D$, and the input is AC‑coupled through $C_1$ to the source.\n\nBut look carefully at the source node: the node where $C_1$ lands is **also tied directly to ground**. So the source of $M_1$ is hard‑grounded, both for DC and for AC.\n\n## DC Operating Point\n\n$C_1$ blocks DC, so $V_{in}$ (and its DC level) has no effect on the bias:\n\n$$V_{GS}=V_b , \\qquad V_S = 0$$\n\n$$I_D=\\tfrac{1}{2}\\mu_nC_{ox}\\frac{W}{L}\\left(V_b-V_{TH}\\right)^2$$\n\n$$V_{out}=V_{DD}-R_D I_D$$\n\nwith the saturation requirement\n\n$$V_{out}\\ge V_b-V_{TH}$$\n\nSo the bias is perfectly well defined — $M_1$ simply acts as a current source pulling $I_D$ through $R_D$. (No body effect, since $V_{SB}=0$.)\n\n## Small‑Signal Analysis\n\nIn the small‑signal model:\n\n* $V_b$ is a **DC** bias ⇒ gate is an **AC ground**: $v_g = 0$\n* The source is **tied to ground** ⇒ $v_s = 0$\n\nTherefore\n\n$$v_{gs}=v_g-v_s=0 \\quad\\Longrightarrow\\quad i_d=g_mv_{gs}=0$$\n\nWith no current injected into the output node, the only elements there ($R_D$ to AC ground and $r_O$ to ground) carry no current:\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=0}$$\n\nThe capacitor $C_1$ simply **shorts the input signal to ground**. The source delivers a current\n\n$$i_{in}=sC_1\\,v_{in}\\qquad (Z_{in}=1/sC_1)$$\n\nwhich flows straight into ground — the signal never reaches the transistor, because $M_1$ \"sees\" the same potential (ground) on both its gate and its source.\n\nThe output node still has impedance $R_{out}=R_D\\|r_O$, but it carries no signal.\n\n## Conclusion / Fix\n\nThis is a **broken common-gate amplifier**: grounding the source kills the gain. To make it work, the source must be allowed to move — remove the direct ground and bias the source with a current source (or a large source resistor/inductor), giving\n\n$$A_v \\simeq (g_m+g_{mb})R_D ,\\qquad R_{in}=\\frac{1}{g_m+g_{mb}}$$",
        "format": "markdown",
        "sha256": "1a6af65a7290aaddc72deac78f225cc004b0d17f3a190d22ca60b05569571128"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source node is hard-shorted to ground, so the input is shunted and the ideal small-signal voltage gain is zero. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1904,
        "output_tokens": 2387,
        "total_tokens": 4291,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1904,
        "output_tokens": 2387,
        "total_tokens": 4291,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Counting the Poles\n\n**Identify the independent nodes (other than ground):**\n\n- **Node A – the gate** of $M_1$ (driven by $V_{in}$ through $R_S$), loaded by $C_{GS}$ and $C_{GD}$\n- **Node B – the drain** = $V_{out}$ (driven through $R_D$), loaded by $C_{DB}$ and $C_{GD}$\n- **The source** of $M_1$ is tied directly to ground → $C_{SB}$ has both terminals at ground, so it is **short‑circuited and plays no role** (it carries no signal voltage).\n\n**Result:** Only two nodes can store charge with a resistance to ground, so the transfer function has\n\n$$\\boxed{\\text{2 poles}}$$\n\napproximately\n\n$$\\omega_{p,in}\\approx\\frac{1}{R_S\\big[C_{GS}+(1+g_mR_D)C_{GD}\\big]},\\qquad \n\\omega_{p,out}\\approx\\frac{1}{R_D\\big(C_{DB}+C_{GD}\\big)}$$\n\n(with $C_{SB}$ eliminated by the grounded source).",
        "format": "markdown",
        "sha256": "4ba5661fc88ee370929a1351f8344524c784c15ce02b400d8ab9af9bf93027d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives two poles and accounts for the capacitors, noting that CSB is shorted because both terminals are grounded.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2126,
        "output_tokens": 618,
        "total_tokens": 2744,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 229,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2126,
        "output_tokens": 618,
        "total_tokens": 2744,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 229,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Two poles\n\n**Why:**\n\nCount the *independent* nodes that have capacitance to ground (each such node contributes one pole):\n\n| Node | Capacitance seen | Contributes a pole? |\n|---|---|---|\n| **Gate (input)** | $C_{GS}$ + Miller contribution of $C_{GD}$, driven through $R_S$ | ✅ yes |\n| **Drain (output)** | $C_{DB}$ + Miller contribution of $C_{GD}$, seen with $R_D$ (‖$r_O$) | ✅ yes |\n| **Source** | $C_{SB}$ | ❌ no — the source is tied directly to ground, so $C_{SB}$ is short‑circuited and has no effect |\n\nSo only the gate and drain nodes are \"floating\" with respect to ground, giving\n\n$$\\omega_{p,\\text{in}}\\approx\\frac{1}{R_S\\left[C_{GS}+(1+g_mR_D)C_{GD}\\right]},\\qquad \n\\omega_{p,\\text{out}}\\approx\\frac{1}{R_D\\left[C_{DB}+C_{GD}\\right]}$$\n\n(There is also a right‑half‑plane **zero** at $\\omega_z = g_m/C_{GD}$, but that is not a pole.)",
        "format": "markdown",
        "sha256": "015b5a5a3b3c1239c54a030d10a8290e7474c71141a3e6cddda1759d03369162"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and explains that CSB is shorted because the source is grounded, accounting for the capacitor configuration as required by the full-credit rule. The approximate pole formulas are not needed for the conclusion.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2126,
        "output_tokens": 623,
        "total_tokens": 2749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 189,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2126,
        "output_tokens": 623,
        "total_tokens": 2749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 189,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Counting the Poles\n\n**Step 1 – Identify the nodes.**\nPoles arise at nodes that have capacitance to ground (AC ground). The candidate nodes are:\n\n- **Gate node** (between $R_S$ and the gate)\n- **Drain node** ($V_{out}$)\n- **Source node**\n\n**Step 2 – Check the source node.**\nThe source of $M_1$ is tied directly to ground, so $C_{SB}$ is connected from ground to ground — it is short‑circuited and carries no signal. The source node is therefore **not** a pole‑producing node.\n\n**Step 3 – Remaining nodes.**\n\n- **Gate node:** sees $C_{GS}$ plus the Miller‑multiplied $C_{GD}$, driven by $R_S$ → one pole\n- **Drain node:** sees $C_{DB}$ plus the Miller contribution of $C_{GD}$, with resistance $R_D$ → one pole\n\n## Answer\n\n**Two poles** — one at the gate (input) node and one at the drain (output) node; $C_{SB}$ is shorted out by the grounded source and contributes nothing.",
        "format": "markdown",
        "sha256": "48530b4db1a5e7871a1a8e80b474c8b47a14af450ffa0d158a47d76a5177bd4a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and explains that CSB is shorted out because both terminals are grounded, satisfying the full-credit rule.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2126,
        "output_tokens": 648,
        "total_tokens": 2774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 269,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2126,
        "output_tokens": 648,
        "total_tokens": 2774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 269,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Recognizing the topology\n\n* **Forward amplifier:** M₁ has the signal applied to its **source** (V_in) and the output taken at its **drain** → a **common‑gate stage**.\n* **Feedback network:** R₁–R₂ is a voltage divider hung across the output node. The tap voltage\n\n$$V_F=\\frac{R_2}{R_1+R_2}V_{out}\\equiv \\beta V_{out}$$\n\nis returned to the **gate**.\n\nSince the gate–source loop gives $v_{GS}=V_F-V_{in}$, the fed‑back voltage **subtracts in series** with the input, while the divider **senses the output voltage in shunt**:\n\n> **Series–shunt (voltage–voltage) feedback → a non‑inverting voltage amplifier (the MOS version of the non‑inverting op‑amp connection).**\n\n**Sign check (loop gain):** break the loop at the gate, ground the input (source at ac ground). M₁ then acts as a common‑source stage: $v_{out}=-g_m R_D' v_g$, and $v_F=\\beta v_{out}$, so\n\n$$T=-\\frac{v_F}{v_g}\\Big|_{\\text{loop}}\\!>0 \\;\\Rightarrow\\; \\textbf{negative feedback}.$$\n\n## 2. Loading and loop gain\n\nWith $R_D'=R_D\\,\\|\\,(R_1+R_2)$ (the divider loads the output) and the gate drawing no current ($R_1\\|R_2$ in the gate loop is harmless):\n\n$$\\boxed{T=g_m\\beta R_D'=\\frac{g_mR_2\\,[R_D\\|(R_1+R_2)]}{R_1+R_2}}$$\n\n(include $r_O$ by replacing $R_D'\\to R_D'\\|r_O$).\n\n## 3. Closed‑loop gain (exact KCL at the drain)\n\n$$\\frac{v_{out}}{R_D'}+g_m(\\beta v_{out}-v_{in})=0$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_mR_D'}{1+g_m\\beta R_D'}=\\frac{A_{open}}{1+T}}\\qquad(A_{open}=g_mR_D')$$\n\nFor a large loop gain ($g_m\\beta R_D'\\gg1$):\n\n$$A_v\\;\\to\\;\\frac1\\beta=1+\\frac{R_1}{R_2}\\;\\;(>0,\\ \\text{non‑inverting})$$\n\nThe \"error\" voltage behaves exactly like an op‑amp virtual short:\n\n$$v_{GS}=\\beta v_{out}-v_{in}=-\\frac{v_{in}}{1+T}\\;\\xrightarrow[T\\gg1]{}\\;0 .$$\n\n## 4. Terminal impedances\n\n**Input (looking into the source):** $i_{in}=g_m v_{in}(1-\\beta A_v)$\n\n$$\\boxed{R_{in}=\\frac{1}{g_m}\\,(1+T)=\\frac1{g_m}+\\beta R_D'}$$\n\n→ series feedback **raises** the normally low $1/g_m$ of a common‑gate stage.\n\n**Output (v_in = 0, test source at V_out):** $i_x=v_x\\!\\left(\\frac1{R_D'}+g_m\\beta\\right)$\n\n$$\\boxed{R_{out}=\\frac{R_D'}{1+T}}$$\n\n→ shunt sensing **lowers** the output resistance. (Both agree with the \"open‑loop ÷ (1+T)\" rules, because here the feedback analysis is exact.)\n\n## 5. Bias / second‑order points\n\n* The divider also sets the **dc** gate voltage: $V_G=\\beta V_{out}$, with $V_{out}=V_{DD}-I_DR_D$ and $V_{GS}=V_G-V_{IN}$ — i.e. the stage is **self‑biased**, and the drain‑current dc path must be supplied by the V_in source (dc‑coupled drive required).\n* If the bulk is grounded, $v_{BS}=-v_{in}$ adds $g_{mb}$ to the *forward* path only:\n $A_v=(g_m+g_{mb})R_D'/(1+g_m\\beta R_D')\\to(1+g_{mb}/g_m)(1+R_1/R_2)$.\n* With channel‑length modulation: $A_v=\\dfrac{(g_m+1/r_O)(R_D'\\|r_O)}{1+g_m\\beta (R_D'\\|r_O)}$.\n\n## 6. Summary\n\n| Quantity | Open loop | Closed loop |\n|---|---|---|\n| Gain | $g_mR_D'$ | $\\dfrac{g_mR_D'}{1+T}\\to 1+\\dfrac{R_1}{R_2}$ |\n| $R_{in}$ | $1/g_m$ | $(1/g_m)(1+T)$ ↑ |\n| $R_{out}$ | $R_D\\|(R_1{+}R_2)$ | $R_D'/(1+T)$ ↓ |\n| Bandwidth | $\\omega_0$ | $\\omega_0(1+T)$ ↑ |\n\nSo the circuit is a **non‑inverting, series–shunt feedback amplifier** whose gain is set almost entirely by the resistor ratio $1+R_1/R_2$, with high input resistance, low output resistance, and reduced sensitivity to $g_m$, $R_D$ and temperature — at the cost of gain reduced by the factor $1+g_m\\beta R_D'$.",
        "format": "markdown",
        "sha256": "5cf97f107c0a6c39fc0d61d740ccc48856cf993943b35552feff9b791f7a8690"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative feedback, and derives the closed-loop gain given in the golden solution. The additional impedance and second-order discussion does not contradict the essential result.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1772,
        "output_tokens": 7533,
        "total_tokens": 9305,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5631,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1772,
        "output_tokens": 7533,
        "total_tokens": 9305,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5631,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n* **M₁ is a common‑gate (CG) stage:** the signal enters at the **source** (V_in) and leaves at the **drain** (V_out = V_DD – R_D·I).\n* **R₁–R₂ is a feedback network:** it *senses the output voltage in parallel* (shunt sensing) and returns the fraction\n\n$$\\beta=\\frac{R_2}{R_1+R_2}$$\n\nto the **gate**, where it is subtracted from the input in series with it ( $v_{GS}=v_F-v_{in}$ ).\n\nSo this is a **series–shunt (voltage–voltage) feedback amplifier** – the MOS version of the non‑inverting op‑amp connection. Note the sense of the loop: a signal applied to the *gate* sees a common‑source (inverting) path to the drain, so the loop is **negative**.\n\n---\n\n## 2. Bias point (gate draws no DC current)\n\n$$V_{out}=V_{DD}-R_D\\Big(I_D+\\frac{V_{out}}{R_1+R_2}\\Big)\\;\\Rightarrow\\;\nV_{out}=\\frac{(V_{DD}-R_DI_D)(R_1+R_2)}{R_1+R_2+R_D}$$\n\n$$V_G=V_F=\\frac{R_2}{R_1+R_2}V_{out},\\qquad V_{GS}=V_F-V_{in},\\qquad \nI_D=\\tfrac12\\mu_nC_{ox}\\tfrac{W}{L}(V_{GS}-V_{TH})^2$$\n\n**Useful observation:** since $V_G=\\beta V_{out}<V_{out}=V_D$, we always have $V_{DG}=V_{out}R_1/(R_1+R_2)>0>-V_{TH}$ — **the feedback divider guarantees saturation** as long as V_out > 0. The loop also stabilizes the operating point at DC (if I_D rises, V_out falls, V_F falls, V_GS falls).\n\n---\n\n## 3. Small‑signal analysis (λ = 0, body effect neglected)\n\nLet $R_F=R_1+R_2$, $v_F=\\beta v_{out}$, $v_{gs}=v_F-v_{in}$. KCL at the output node:\n\n$$\\frac{v_{out}}{R_D}+\\frac{v_{out}}{R_F}+g_m(\\beta v_{out}-v_{in})=0$$\n\n$$\\boxed{\\;A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_mR_DR_F}{R_F+R_D\\left(1+g_mR_2\\right)}\n=\\frac{g_m\\,(R_D\\|R_F)}{1+\\beta g_m (R_D\\|R_F)}\\;}$$\n\nThe gain is **positive (non‑inverting)**, as expected for a CG stage, and is **reduced** by the factor (1+T).\n\n**Feedback quantities**\n\n$$A_0=g_m(R_D\\|R_F),\\qquad \\beta=\\frac{R_2}{R_1+R_2},\\qquad \nT=\\beta A_0=\\frac{g_mR_DR_2}{R_D+R_1+R_2}$$\n\n$$A_v=\\frac{A_0}{1+T}=\\Big(1+\\frac{R_1}{R_2}\\Big)\\frac{T}{1+T}\\;\\xrightarrow[T\\gg1]{}\\;1+\\frac{R_1}{R_2}$$\n\n**Input resistance (looking into the source)** — series feedback raises it:\n\n$$R_{in}=\\frac{1+T}{g_m}=\\frac{1}{g_m}+\\frac{R_DR_2}{R_D+R_1+R_2}$$\n\n**Output resistance (v_in = 0)** — shunt sensing lowers it:\n\n$$R_{out}=\\frac{R_D\\|R_F}{1+T}=\\frac{R_DR_F}{R_F+R_D(1+g_mR_2)}$$\n\nWith a source resistance R_S the overall gain is $A_v\\cdot R_{in}/(R_{in}+R_S)$.\n\n---\n\n## 4. Refinements\n\n**With channel‑length modulation** (r_O from drain to source):\n\n$$A_v=\\frac{g_m+1/r_O}{\\dfrac{1}{R_D}+\\dfrac{1+g_mR_2}{R_1+R_2}+\\dfrac{1}{r_O}}$$\n\n**With body effect** (bulk grounded ⇒ $v_{bs}=-v_{in}$, affects only the forward path):\n\n$$A_v=\\frac{(g_m+g_{mb})R_DR_F}{R_F+R_D(1+g_mR_2)}\\;\\xrightarrow[T\\gg1]{}\\;\\Big(1+\\frac{g_{mb}}{g_m}\\Big)\\Big(1+\\frac{R_1}{R_2}\\Big)$$\n\n---\n\n## 5. Numerical illustration\n\ng_m = 10 mS, R_D = 1 kΩ, R₁ = 9 kΩ, R₂ = 1 kΩ (1/β = 10):\n\n* $R_D\\|R_F = 0.91\\ \\text{k}\\Omega$, $A_0 = 9.1$, $T = 0.91$\n* $A_v = 9.1/1.91 = 4.8$ (far from 1/β = 10 because T is small)\n* $R_{in} = 1.91/g_m = 191\\ \\Omega$, $R_{out} = 909/1.91 = 476\\ \\Omega$\n\n**Design message:** the closed‑loop gain approaches the resistor ratio $1+R_1/R_2$ only if the loop gain $T=g_mR_DR_2/(R_D+R_1+R_2)$ is large, i.e. the intrinsic $g_mR_D$ of the stage must be much larger than the desired gain; otherwise the feedback mainly buys you bias stability, higher R_in and lower R_out.",
        "format": "markdown",
        "sha256": "f97ee831660428f15b5be1989305f04e0f7f1c80e34effacbacd20df6a67a5f6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. Its closed-loop gain matches the stated expression; the additional analysis is not needed for full credit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1772,
        "output_tokens": 10250,
        "total_tokens": 12022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8233,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1772,
        "output_tokens": 10250,
        "total_tokens": 12022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8233,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n* **Core (forward) amplifier:** M₁ with the signal applied to its **source** and the output taken at its **drain** → a **common‑gate (CG) stage** with load R_D. (This is why the gain is non‑inverting.)\n* **Feedback network:** the divider R₁–R₂ hangs from the output to ground and its tap V_F drives the **gate**:\n\n$$V_F=\\frac{R_2}{R_1+R_2}\\,V_{out}\\equiv \\beta V_{out},\\qquad \\beta=\\frac{R_2}{R_1+R_2}$$\n\n* **Error (mixing) quantity:** the device responds to $V_{GS}=V_F-V_{in}$, i.e. the fed‑back voltage appears **in series** with the input in the gate–source loop.\n\n**Polarity check:** V_in ↑ ⇒ V_GS ↓ ⇒ I_D ↓ ⇒ V_out ↑ ⇒ V_F ↑ ⇒ V_GS ↑ — the return signal opposes the change → **negative feedback**.\n\n**Topology:** output voltage sensed in *parallel* (shunt), feedback voltage returned in *series* with the input → **series–shunt = voltage–voltage feedback** ⇒ a *voltage amplifier*: gain stabilized at ≈1/β, **R_in raised**, **R_out lowered**.\n\n## 2. Loading of the feedback network\n\n* At the output: the gate draws no current, so the divider loads the drain node with **R₁ + R₂**:\n$$R_D'=R_D\\,\\|\\,(R_1+R_2)$$\n* At the input: the Thévenin resistance R₁‖R₂ sits in series with the gate — harmless, since $i_G=0$.\n* There is **no forward path** through R₁–R₂ (the input enters at the source), so the single‑loop analysis is exact.\n\n## 3. Open‑loop gain and loop gain (ignore r_o, body effect first)\n\n$$A_0=g_mR_D' ,\\qquad T=\\beta A_0=\\frac{g_mR_D'R_2}{R_1+R_2}$$\n\n(Break the loop at the gate with the source grounded: $v_g\\to -g_mR_D'v_g\\to -\\beta g_mR_D'v_g$.)\n\n## 4. Closed‑loop results\n\n**Direct KCL check at the drain** ($V_F=\\beta V_{out}$, source driven by V_in):\n\n$$-\\frac{V_{out}}{R_D}-\\frac{V_{out}}{R_1+R_2}=g_m(\\beta V_{out}-V_{in})$$\n\n$$\\boxed{\\;A_v=\\frac{V_{out}}{V_{in}}=\\frac{g_mR_D'}{1+g_mR_D'\\dfrac{R_2}{R_1+R_2}}=\\frac{A_0}{1+T}\\;}$$\n\n**Input resistance** (current taken from the source terminal, $i_{in}=g_m(V_{in}-\\beta V_{out})$):\n\n$$\\boxed{\\;R_{in}=\\frac{1+T}{g_m}=\\frac{1}{g_m}+\\frac{R_2}{R_1+R_2}R_D'\\;}\\quad\\text{(the CG value }1/g_m\\text{ raised by }1+T)$$\n\n**Output resistance** (V_in = 0 ⇒ source grounded, drive V_X at the output):\n\n$$i_X=V_X\\!\\left(\\frac{1}{R_D'}+g_m\\beta\\right)\\;\\Rightarrow\\;\\boxed{\\;R_{out}=\\frac{R_D'}{1+T}\\;}$$\n\n**Large loop gain** ($g_mR_D'\\beta\\gg1$):\n\n$$A_v\\to\\frac{1}{\\beta}=1+\\frac{R_1}{R_2}$$\n\nset only by a resistor ratio; the bandwidth is correspondingly widened by (1+T).\n\n## 5. Refinements\n\nWith channel‑length modulation and body effect included ($i_d=g_mv_{gs}+g_{mb}v_{bs}+v_{ds}/r_o$):\n\n$$A_v=\\frac{(g_m+g_{mb})+1/r_o}{\\;g_m\\beta+\\dfrac{1}{R_D'}+\\dfrac{1}{r_o}\\;},\\qquad \nT=g_m\\beta\\,(R_D'\\|r_o),\\qquad R_{out}=\\frac{R_D'\\|r_o}{1+T}$$\n\nNote that the body effect boosts the **forward** gain (input at the source) but **not** the loop gain (feedback enters the gate).\n\n## 6. Bias (DC) note\n\nSince the divider is DC‑coupled, it also **self‑biases** the gate: $V_G=\\beta V_{out}$ with $I_D\\simeq (V_{DD}-V_{out})/R_D$. Any tendency of I_D to increase pulls V_out down, lowers V_GS and pushes I_D back — the same negative loop stabilizes the operating point against V_TH, μC_ox and temperature variations. (Saturation is essentially guaranteed: $V_{DS}-V_{GS}+V_{TH}=(1-\\beta)V_{out}+V_{TH}>0$.) In practice V_in would be capacitively coupled to the source, with a current source or resistor providing the DC source current.",
        "format": "markdown",
        "sha256": "3d33e0a66073b38897fe47873185039d30417156042cd35dcf5d1a82eecd54b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative-feedback polarity, with the correct closed-loop gain. The additional resistance and refinement discussion is not required and does not contradict the essential model.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1772,
        "output_tokens": 9566,
        "total_tokens": 11338,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1772,
        "output_tokens": 9566,
        "total_tokens": 11338,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the Topology\n\nLook at the terminals of each device:\n\n**M₁:** drain → V_DD (ac ground), gate → V_in, source → V_out\n**M₂:** gate → V_b (constant dc bias, ac ground), source → ground, drain → V_out\n\nSo the signal enters the **gate of M₁ and leaves at its source**, with the drain ac‑grounded → **M₁ is a source follower (common‑drain stage)**. M₂ has a fixed gate–source voltage, so it behaves as a **current sink (ideal‑current‑source load)** whose only ac contribution is its output resistance r_O2.\n\n**Circuit = source follower biased by a current‑source (current‑sink) load.**\n\n---\n\n## 1. Bias (large‑signal) behavior\n\nM₂ sets the drain current (assuming it is saturated):\n\n$$I_D=\\tfrac12\\mu_nC_{ox}\\Big(\\tfrac{W}{L}\\Big)_2 (V_b-V_{TH2})^2$$\n\nSince I_D1 = I_D2 is forced, V_GS1 is essentially fixed, and\n\n$$\\boxed{V_{out}=V_{in}-V_{GS1}=V_{in}-V_{TH1}-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\,(V_b-V_{TH2})}$$\n\ni.e. the output is a **level‑shifted replica of the input** (shift ≈ V_GS1). The only nonlinearity comes from the body effect, because\n$V_{TH1}=V_{TH0}+\\gamma\\big(\\sqrt{2\\phi_F+V_{out}}-\\sqrt{2\\phi_F}\\big)$ varies with V_out (if the bulk of M₁ is tied to ground).\n\n**Region requirements**\n\n* M₁ saturated: $V_{DD}-V_{out}\\ge V_{GS1}-V_{TH1}$ → almost always true (needs $V_{in}\\le V_{DD}+V_{TH1}$).\n* M₂ saturated: $V_{out}\\ge V_b-V_{TH2}=V_{OV2}$ → sets the **lower limit of the output swing**; below this M₂ enters the triode region and the bias current collapses.\n* Upper limit: $V_{out,max}=V_{in,max}-V_{GS1}$ (≈ V_DD − V_GS1 if V_in is limited to V_DD).\n\n---\n\n## 2. Small‑signal gain\n\nWith the bulk of M₁ grounded, $v_{bs1}=-v_{out}$, and M₂ contributes only $r_{O2}$:\n\nKCL at the output node:\n\n$$g_{m1}(v_{in}-v_{out})-g_{mb1}v_{out}-\\frac{v_{out}}{r_{O1}}=\\frac{v_{out}}{r_{O2}}$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}}{g_{m1}+g_{mb1}+r_{O1}^{-1}+r_{O2}^{-1}}\n=\\frac{g_{m1}(r_{O1}\\|r_{O2})}{1+(g_{m1}+g_{mb1})(r_{O1}\\|r_{O2})}}$$\n\nIf channel‑length modulation is neglected ($r_O\\to\\infty$):\n\n$$A_v\\simeq\\frac{g_{m1}}{g_{m1}+g_{mb1}}=\\frac{1}{1+\\eta}\\qquad \\eta=\\frac{g_{mb}}{g_m}\\approx0.1-0.25$$\n\nso the gain is **slightly less than unity (≈ 0.75–0.9)** — and exactly 1 if the source and bulk of M₁ are tied together (e.g. M₁ in its own well).\n\n---\n\n## 3. Impedances\n\n**Input:** $R_{in}=\\infty$ at low frequency (pure gate). At high frequency $C_{in}\\approx C_{GD1}+C_{GS1}(1-A_v)$ — C_GS is *bootstrapped*, so the input capacitance is small.\n\n**Output:** set $v_{in}=0$:\n\n$$\\boxed{R_{out}=\\frac{1}{g_{m1}+g_{mb1}}\\Big\\|r_{O1}\\Big\\|r_{O2}\\;\\approx\\;\\frac{1}{g_{m1}+g_{mb1}}}$$\n\na low resistance (hundreds of ohms to a few kΩ).\n\n---\n\n## 4. What it is good for / its drawbacks\n\n| Feature | Comment |\n|---|---|\n| Voltage gain | ≤ 1 (no gain) |\n| Input impedance | Very high |\n| Output impedance | Low ≈ 1/(g_m+g_mb) |\n| Function | **Buffer / level shifter**, drives low‑impedance or capacitive loads without loading the previous stage |\n| Linearity | Good (constant bias current keeps V_GS1 constant); degraded by body effect |\n| Drawbacks | V_GS1 level shift eats headroom; limited output swing [V_OV2 , V_in,max−V_GS1]; body effect lowers gain and adds distortion; nonlinear/complex pole pair at the output can cause ringing |\n\n**Numerical feel:** with I_D = 1 mA, g_m1 = 2 mA/V, η = 0.2, r_O1 = r_O2 = 50 kΩ:\nA_v = 2m/(2m+0.4m+0.04m) ≈ **0.82**, R_out ≈ 1/(2.4 mA/V) ≈ **410 Ω**.",
        "format": "markdown",
        "sha256": "87642d7d6b3fb0b6e3c0bbb4386010362bced5f04486d2c2e10e138379b113ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-sink load, and gives the positive, slightly sub-unity gain with appropriate body-effect and output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1295,
        "output_tokens": 3468,
        "total_tokens": 4763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1295,
        "output_tokens": 3468,
        "total_tokens": 4763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n| Device | Gate | Drain | Source | Role |\n|---|---|---|---|---|\n| **M₁** | V_in | V_DD (ac ground) | V_out | **Common‑drain (source‑follower) amplifier** |\n| **M₂** | V_b (dc, ac ground) | V_out | GND | **Current‑source (active) load**, I_SS |\n\nSince M₂'s gate sees only a dc bias, it carries a constant current and presents only its output resistance r_O2 to the small signal. The signal enters the *gate* of M₁ and leaves at its *source* → **NMOS source follower (voltage buffer) with a current‑source load.**\n\n---\n\n## 2. DC / large‑signal behaviour\n\nM₂ (in saturation) sets the bias current:\n\n$$I_{SS}=\\tfrac12\\mu_nC_{ox}\\Big(\\frac{W}{L}\\Big)_2 (V_b-V_{TH2})^2$$\n\nBecause M₁ must carry this same current,\n\n$$V_{out}=V_{in}-V_{GS1}=V_{in}-\\left[V_{TH1}(V_{out})+\\sqrt{\\frac{2I_{SS}}{\\mu_nC_{ox}(W/L)_1}}\\right]$$\n\nSo the output **follows** the input, shifted down by one (nearly constant) V_GS1. Note that with the bulk grounded, V_SB1 = V_out, so\n\n$$V_{TH1}=V_{TH0}+\\gamma\\left(\\sqrt{2\\phi_F+V_{out}}-\\sqrt{2\\phi_F}\\right)$$\n\nwhich makes the level shift input‑dependent → **gain < 1 and some nonlinearity.**\n\n---\n\n## 3. Small‑signal analysis (body effect included)\n\nKCL at the output node (V_DD = ac ground, v_bs1 = –v_out):\n\n$$g_{m1}(v_{in}-v_{out})-g_{mb1}v_{out}-\\frac{v_{out}}{r_{O1}}=\\frac{v_{out}}{r_{O2}}$$\n\n**Voltage gain**\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{O1}+g_{O2}}\n=\\frac{g_{m1}(r_{O1}\\|r_{O2})}{1+(g_{m1}+g_{mb1})(r_{O1}\\|r_{O2})}}$$\n\nIf r_O → ∞ (ideal current source):\n\n$$A_v\\simeq\\frac{g_{m1}}{g_{m1}+g_{mb1}}=\\frac{1}{1+\\eta},\\qquad \\eta=\\frac{g_{mb}}{g_m}\\approx0.1\\!-\\!0.25$$\n\ni.e. **A_v ≈ 0.8 – 0.9, slightly less than unity** (it would be exactly 1 only if the bulk were tied to the source).\n\n**Input impedance:** R_in = ∞ at low frequency (pure gate); at high frequency\n$$C_{in}=C_{GD1}+C_{GS1}(1-A_v)\\quad\\text{(bootstrapped, hence small)}$$\n\n**Output impedance:**\n\n$$\\boxed{R_{out}=\\frac{1}{g_{m1}+g_{mb1}}\\;\\Big\\|\\;r_{O1}\\;\\Big\\|\\;r_{O2}\\;\\approx\\;\\frac{1}{g_{m1}+g_{mb1}}}$$\n\n— a **low** output resistance (hundreds of Ω), which is the whole point of the stage.\n\n---\n\n## 4. Headroom / swing limits\n\n* **M₂ in saturation:** $V_{out}\\ge V_b-V_{TH2}=V_{OV2}$ → $V_{in,\\min}=V_{OV2}+V_{GS1}$\n* **M₁ in saturation:** $V_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{TH1}\\Rightarrow V_{in}\\le V_{DD}+V_{TH1}$ (rarely binding)\n* **Maximum output:** $V_{out,\\max}\\approx V_{DD}-V_{GS1}$ (for $V_{in}\\to V_{DD}$)\n\nSo the usable swing is squeezed at *both* ends — one V_GS at the top and one overdrive at the bottom. This is a chief drawback in low‑voltage design.\n\n---\n\n## 5. Frequency response\n\nWith C_GS1 between gate and source and C_L at the output (neglecting g_O):\n\n$$\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}+sC_{GS1}}{(g_{m1}+g_{mb1})+s(C_{GS1}+C_L)}$$\n\n* Zero: $\\omega_z=g_{m1}/C_{GS1}$ (≈ ω_T)\n* Pole: $\\omega_p=(g_{m1}+g_{mb1})/(C_{GS1}+C_L)$\n\nPole and zero are close together → **very wide bandwidth**. Caution: driven from a resistive source, R_out looks *inductive* at high frequency and can ring/oscillate with a capacitive load.\n\n---\n\n## 6. Summary\n\n| Property | Value |\n|---|---|\n| Function | Voltage buffer / level shifter |\n| A_v | g_m1/(g_m1+g_mb1+g_O1+g_O2) ≲ 1 |\n| R_in | ≈ ∞ (capacitive) |\n| R_out | ≈ 1/(g_m1+g_mb1) — low |\n| Current | Set by M₂: I = ½μ_nC_ox(W/L)₂(V_b–V_TH2)² |\n| Level shift | V_out = V_in – V_GS1 |\n\n**Pros:** high input/low output impedance, near‑unity gain, broadband — ideal for driving low‑impedance or capacitive loads and for shifting dc levels.\n**Cons:** gain < 1 and input‑dependent V_TH (body effect → distortion), V_GS level shift and overdrive of M₂ eat into voltage headroom, and M₂ adds noise and finite output resistance (replacing M₂ with a resistor would make the gain load‑dependent instead).",
        "format": "markdown",
        "sha256": "51ee20f46c6adabdc5ed49de79cd5ebc02a16f97d4fd7d95448c351db651a0c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, with a positive gain at or below unity. The small-signal gain and output-resistance expressions are also appropriate; ancillary details do not undermine the essential answer.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1295,
        "output_tokens": 4519,
        "total_tokens": 5814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2370,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1295,
        "output_tokens": 4519,
        "total_tokens": 5814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2370,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the Topology\n\n- **M₁:** drain → V_DD (ac ground), gate → V_in, source → V_out  →  **common‑drain (source‑follower) stage**\n- **M₂:** gate tied to a fixed bias V_b, source grounded  →  **constant‑current source load** (it has no signal on its gate, so it only sets the bias current and contributes r_o2)\n\nSo this is a **source follower (voltage buffer / level shifter) biased by a current source**.\n\n---\n\n## 1. Bias (large‑signal) behaviour\n\nM₂ in saturation sets the tail current:\n\n$$I_D=\\tfrac12\\mu_nC_{ox}\\Big(\\frac{W}{L}\\Big)_2(V_b-V_{TH2})^2$$\n\nSince M₁ carries the same current,\n\n$$V_{out}=V_{in}-V_{GS1}=V_{in}-V_{TH1}-\\sqrt{\\frac{2I_D}{\\mu_nC_{ox}(W/L)_1}}$$\n\ni.e. **the output tracks the input, shifted down by one (nearly constant) V_GS1.** Because I_D is held constant by M₂, the overdrive of M₁ does **not** change with signal level – this is why a current‑source load gives much better linearity than a resistor or diode load. (The only residual nonlinearity comes from the body effect, since V_SB1 = V_out varies.)\n\nFor $V_{in}<V_{TH1}$, M₁ turns off, M₂ pulls V_out to ground (M₂ then enters the triode region with I_D → 0).\n\n**Voltage swing / headroom**\n\n| limit | condition |\n|---|---|\n| lowest V_out | $V_{out}\\ge V_b-V_{TH2}=V_{GS2}-V_{TH2}$ (keeps M₂ saturated) |\n| highest V_out | $V_{out}\\le V_{DD}-V_{GS1}$ (with $V_{in}\\le V_{DD}$) |\n\nM₁ is essentially always saturated, since $V_{DS1}=V_{DD}-V_{out}>V_{GS1}-V_{TH1}$ as long as $V_{in}<V_{DD}+V_{TH1}$.\n\n---\n\n## 2. Small‑signal gain\n\nWriting KCL at the output node (drain of M₁ at ac ground, $v_{ds1}=-v_{out}$, $v_{bs1}=-v_{out}$):\n\n$$g_{m1}(v_{in}-v_{out})-g_{mb1}v_{out}-\\frac{v_{out}}{r_{o1}}=\\frac{v_{out}}{r_{o2}}$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}}{g_{m1}+g_{mb1}+r_{o1}^{-1}+r_{o2}^{-1}}\n=\\frac{g_{m1}(r_{o1}\\|r_{o2})}{1+(g_{m1}+g_{mb1})(r_{o1}\\|r_{o2})}}$$\n\nIf $(g_{m1}+g_{mb1})(r_{o1}\\|r_{o2})\\gg1$:\n\n$$A_v\\simeq\\frac{g_{m1}}{g_{m1}+g_{mb1}}=\\frac{1}{1+\\eta}\\;(<1),\\qquad \\eta=\\frac{g_{mb}}{g_m}\\approx0.1\\!-\\!0.25$$\n\nSo the gain is **slightly less than unity (≈0.8–0.9)**, limited mainly by the body effect. If the bulk of M₁ can be tied to its source (triple well, or a PMOS follower in its own n‑well), $g_{mb1}=0$ and $A_v\\to g_mr_o/(1+g_mr_o)\\approx1$.\n\n*Example:* $g_{m1}=1$ mS, $\\eta=0.2$, $r_{o1}=r_{o2}=20$ kΩ → $A_v=1/(1+0.2+0.1)=0.77$.\n\n---\n\n## 3. Impedances\n\n- **Input:** infinite at low frequency (gate only) — this is the whole point of the buffer. At high frequency $C_{in}\\approx C_{GD1}+(1-A_v)C_{GS1}$ — $C_{GS1}$ is \"bootstrapped\" and largely disappears.\n- **Output (looking into the source of M₁, with M₂ as load):**\n\n$$R_{out}=\\frac{1}{g_{m1}+g_{mb1}+1/r_{o1}}\\,\\Big\\|\\,r_{o2}\\;\\approx\\;\\frac{1}{g_{m1}+g_{mb1}}$$\n\n(≈ 830 Ω in the example above) — low, so the stage can drive resistive/capacitive loads that would kill the gain of a common‑source stage.\n\n---\n\n## 4. Summary of behaviour and use\n\n| Property | Value |\n|---|---|\n| Function | Voltage buffer / DC level shifter |\n| Voltage gain | $\\le 1$, $\\approx 1/(1+\\eta)$ |\n| $R_{in}$ | ∞ (dc) |\n| $R_{out}$ | $\\approx 1/(g_{m1}+g_{mb1})$ |\n| Current gain | large |\n| Bias current | set by $V_b$ and $(W/L)_2$, signal‑independent |\n\n**Advantages:** high input / low output impedance, wide bandwidth (no Miller multiplication; an LHP zero at $\\omega_z\\approx g_{m1}/C_{GS1}$), good linearity thanks to the constant bias current.\n\n**Drawbacks:** gain < 1 and signal‑dependent via the body effect; the $V_{GS1}$ level shift costs headroom; the bottom of the swing is clamped at $V_b-V_{TH2}$; and the input impedance can look negative‑resistive at high frequency when driven from an inductive source (potential ringing/instability with large $C_L$).",
        "format": "markdown",
        "sha256": "5db274824f6dfdee184f3d0485e5244d3bd4960da3a5396fa7a55e020e81e026"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, and gives the positive gain expression and below-unity behavior, including body effect and finite output resistance. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1295,
        "output_tokens": 4120,
        "total_tokens": 5415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2087,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1295,
        "output_tokens": 4120,
        "total_tokens": 5415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2087,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n- **M₂** – arrow on the source terminal pointing *into* the device, source tied to **V_DD** → **PMOS**\n- **M₁** – source tied to **ground** → **NMOS**\n- Both **gates** are tied together to **V_in**; both **drains** are tied together to **V_out**\n\nThis is the **complementary (static) CMOS inverter** — the basic building block of all CMOS logic. The two devices form a \"push–pull\" pair: the PMOS is the *pull-up* network, the NMOS the *pull-down* network, and they are driven by **complementary** gate overdrives.\n\n$$V_{GS1}=V_{in},\\qquad V_{SG2}=V_{DD}-V_{in}$$\n\n## 2. Large-signal (logic) behaviour\n\n| V_in | M₁ (NMOS) | M₂ (PMOS) | V_out | Static current |\n|---|---|---|---|---|\n| 0 (low) | OFF (V_GS1 = 0 < V_THn) | ON, deep triode (V_SG2 = V_DD) | **V_DD** (V_OH) | ≈ 0 (leakage only) |\n| V_DD (high) | ON, deep triode | OFF (V_SG2 = 0) | **0** (V_OL) | ≈ 0 (leakage only) |\n\n$$\\boxed{V_{out}=\\overline{V_{in}}}$$\n\nKey consequences:\n\n- **Rail-to-rail swing:** V_OH = V_DD, V_OL = 0 — no threshold drop (unlike an NMOS-load or pass-transistor stage), because whichever device is ON ends up in deep triode with V_DS → 0.\n- **Ratioless logic:** the output *levels* don't depend on W/L; sizing only sets the switching point and the delays.\n- **Essentially zero static power:** one transistor is always off, so $P_{static}\\approx V_{DD}I_{leak}$. Power is dynamic:\n$$P = \\alpha f C_L V_{DD}^2 + P_{short\\text{-}circuit}$$\n- **Infinite DC input resistance** (pure gate capacitance); input load $C_{in}\\approx C_{g1}+C_{g2}$.\n\n## 3. Voltage-transfer characteristic (VTC) — five regions\n\nWith $V_{THn}$ and $|V_{THp}|$:\n\n| Region | V_in | M₁ | M₂ | V_out |\n|---|---|---|---|---|\n| A | $0\\le V_{in}<V_{THn}$ | off | triode | $V_{DD}$ |\n| B | $V_{THn}<V_{in}<V_M$ | **sat** | triode | falls slowly |\n| C | $V_{in}\\approx V_M$ | **sat** | **sat** | steep drop |\n| D | $V_M<V_{in}<V_{DD}-|V_{THp}|$ | triode | **sat** | falls to ~0 |\n| E | $V_{in}>V_{DD}-|V_{THp}|$ | triode | off | $0$ |\n\n```\nVout\nVDD ─────┐A\n          \\B\n           |C   (near-vertical, high gain)\n            \\D\n  0          └────── E\n     0    VM        VDD   Vin\n```\n\n**Switching threshold** (both in saturation, square-law, $\\beta=\\mu C_{ox}W/L$):\n\n$$\\tfrac12\\beta_n(V_M-V_{THn})^2=\\tfrac12\\beta_p(V_{DD}-V_M-|V_{THp}|)^2$$\n\n$$V_M=\\frac{V_{THn}+\\sqrt{\\beta_p/\\beta_n}\\,\\bigl(V_{DD}-|V_{THp}|\\bigr)}{1+\\sqrt{\\beta_p/\\beta_n}}$$\n\nFor a **symmetric** inverter ($V_M = V_{DD}/2$) with $V_{THn}=|V_{THp}|$ you need $\\beta_n=\\beta_p$, i.e.\n\n$$\\left(\\frac{W}{L}\\right)_p=\\frac{\\mu_n}{\\mu_p}\\left(\\frac{W}{L}\\right)_n\\approx(2\\!-\\!3)\\left(\\frac{W}{L}\\right)_n$$\n\nwhich also equalises $t_{pLH}$ and $t_{pHL}$.\n\n## 4. Small-signal gain in region C\n\nBoth devices are saturated, the transconductances **add**, the output resistances are in **parallel**:\n\n$$A_v=-\\left(g_{m1}+g_{m2}\\right)\\left(r_{o1}\\parallel r_{o2}\\right)$$\n\nThis is large (tens to hundreds), giving the near-vertical transition → **regenerative** logic with good noise immunity. (Biased at V_M, the same circuit is the classic *self-biased CMOS amplifier* / ring-oscillator stage.)\n\n## 5. Noise margins\n\n$V_{IL}$ and $V_{IH}$ are the unity-gain points of the VTC. For the matched case ($\\beta_n=\\beta_p$, $V_{THn}=|V_{THp}|=V_t$):\n\n$$V_{IL}=\\frac{3V_{DD}+2V_t}{8},\\qquad V_{IH}=\\frac{5V_{DD}-2V_t}{8}$$\n\n$$NM_L=V_{IL}-V_{OL}=NM_H=V_{OH}-V_{IH}=\\frac{3V_{DD}+2V_t}{8}\\;\\approx\\;0.4\\,V_{DD}$$\n\ni.e. close to the ideal $V_{DD}/2$ — maximum, symmetric noise margins.\n\n## 6. Dynamic behaviour\n\nCharging/discharging a load $C_L$:\n\n$$t_{pHL}\\approx\\frac{C_L V_{DD}}{2 I_{Dn,sat}}\\ \\ \\text{(NMOS discharges } C_L),\\qquad\nt_{pLH}\\approx\\frac{C_L V_{DD}}{2 I_{Dp,sat}}\\ \\ \\text{(PMOS charges } C_L)$$\n\nDuring the transition, for $V_{THn}<V_{in}<V_{DD}-|V_{THp}|$ **both** devices conduct, giving a **short-circuit (crowbar) current** that peaks at $V_{in}=V_M$:\n\n$$I_{peak}=\\tfrac12\\beta_n\\!\\left(\\tfrac{V_{DD}}{2}-V_{THn}\\right)^2 \\quad\\text{(symmetric case)}$$\n\nkept small by using fast input edges.\n\n## 7. Summary\n\nThe figure is a **CMOS inverter (NOT gate)**: complementary PMOS pull-up / NMOS pull-down with common gate input and common drain output. It provides logic inversion with full rail-to-rail output, high gain and symmetric noise margins, zero static power, infinite DC input resistance, and low output impedance in both states — the reason it is the universal cell of digital CMOS (and, biased in region C, a useful high-gain analog inverting amplifier).",
        "format": "markdown",
        "sha256": "bb56d1125c3547d8272f8fbd8554581ee6e6e1386c12a4a51e9c46541bc80c59"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with a PMOS pull-up and NMOS pull-down, and describes its inverting operation. The optional analysis does not contradict the inverter’s essential operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 324,
        "output_tokens": 4760,
        "total_tokens": 5084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2360,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 324,
        "output_tokens": 4760,
        "total_tokens": 5084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2360,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identification of the Topology\n\n* **M₁** is an **NMOS**: source → ground, gate → V_in, drain → V_out\n* **M₂** is a **PMOS**: source → V_DD, gate → V_in, drain → V_out\n* Both gates are tied to V_in, both drains are tied to V_out (bulks assumed tied to their own sources, so no body effect).\n\nThis is the **static CMOS inverter (NOT gate)** – a complementary common‑source stage in which the PMOS acts as an *active (complementary) load* for the NMOS, rather than a resistor or a current source.\n\n**Terminal voltages**\n\n| Device | V_GS | V_DS | Condition to conduct |\n|---|---|---|---|\n| M₁ (n) | V_in | V_out | V_in > V_THN |\n| M₂ (p) | V_in − V_DD (i.e. V_SG = V_DD − V_in) | V_out − V_DD (V_SD = V_DD − V_out) | V_in < V_DD − \\|V_THP\\| |\n\nSince the two devices are in series between V_DD and ground, **I_D1 = |I_D2| = I_D** at all times (no load current in DC).\n\n## 2. Qualitative Operation\n\n| V_in | M₁ | M₂ | V_out | Static current |\n|---|---|---|---|---|\n| 0 → V_THN (\"0\") | **OFF** | ON (deep triode) | **V_OH = V_DD** | ≈ 0 (leakage only) |\n| V_THN → V_M | saturation | triode | falling | finite |\n| **V_in = V_M** | saturation | saturation | steep drop | **peak (short‑circuit) current** |\n| V_M → V_DD−\\|V_THP\\| | triode | saturation | falling | finite |\n| V_DD−\\|V_THP\\| → V_DD (\"1\") | ON (deep triode) | **OFF** | **V_OL = 0** | ≈ 0 |\n\nKey consequences:\n\n* **Rail‑to‑rail output** (V_OH = V_DD, V_OL = 0) because the “off” device is a true open circuit — the logic levels are *independent of device sizes* (**ratioless logic**).\n* **No static power dissipation** in either logic state — current flows only while switching.\n* High input impedance (pure gate capacitance), so fan‑out is limited only by speed, not by DC loading.\n\n```\n Vout\n VDD ─────────┐\n              │  ← both devices sat.\n              │     (very high |gain|)\n              └──────────── 0\n      0    VTHN  V_M   VDD-|VTHP|   VDD →  Vin\n```\n\n## 3. Switching Threshold V_M\n\nSet V_in = V_out = V_M (both saturated) and equate currents:\n\n$$\\tfrac12\\beta_n (V_M-V_{THN})^2=\\tfrac12\\beta_p (V_{DD}-V_M-|V_{THP}|)^2,\\qquad \\beta=\\mu C_{ox}\\frac{W}{L}$$\n\n$$\\boxed{V_M=\\frac{V_{THN}+\\sqrt{\\beta_p/\\beta_n}\\,\\bigl(V_{DD}-|V_{THP}|\\bigr)}{1+\\sqrt{\\beta_p/\\beta_n}}}$$\n\n* For a **symmetric VTC** (V_M = V_DD/2 with V_THN = |V_THP|) one needs β_p = β_n, i.e.\n (W/L)_p = (μ_n/μ_p)(W/L)_n ≈ **2–3 ×** (W/L)_n.\n* Increasing (W/L)_p pushes V_M **up**; increasing (W/L)_n pushes V_M **down**. This is the only design knob the ratio controls.\n\n## 4. Small‑Signal Gain (inverter used as an amplifier)\n\nBiased near V_M both transistors are saturated and appear in *parallel* for the signal (both gates driven, both drains loaded):\n\n$$A_v=-\\,(g_{m1}+g_{m2})\\,(r_{o1}\\!\\parallel\\! r_{o2})\n=-\\frac{\\dfrac{2}{V_M-V_{THN}}+\\dfrac{2}{V_{DD}-V_M-|V_{THP}|}}{\\lambda_n+\\lambda_p}$$\n\nBecause *both* devices contribute transconductance for the same bias current, the CMOS inverter gives the **highest g_m/I_D of any single stage** (typically |A_v| ≈ 10–100). Neglecting λ, the VTC transition would be vertical.\n\n## 5. Noise Margins\n\nV_IL and V_IH are where dV_out/dV_in = −1. For the matched case (β_n = β_p, V_THN = |V_THP| = V_T):\n\n$$V_{IL}=\\frac{3V_{DD}+2V_T}{8},\\qquad V_{IH}=\\frac{5V_{DD}-2V_T}{8}$$\n\n$$NM_L=V_{IL}-V_{OL}=\\frac{3V_{DD}+2V_T}{8},\\qquad NM_H=V_{OH}-V_{IH}=\\frac{3V_{DD}+2V_T}{8}$$\n\n*Example:* V_DD = 1.8 V, V_T = 0.45 V → V_IL = 0.79 V, V_IH = 1.01 V, **NM_H = NM_L ≈ 0.79 V ≈ 0.44 V_DD** — close to the theoretical ideal of V_DD/2, far better than resistively‑loaded or NMOS‑load inverters.\n\n## 6. Power and Delay\n\n* **Static:** P_stat = V_DD·I_leak ≈ 0 (subthreshold + gate + junction leakage only).\n* **Dynamic:** P_dyn = α f C_L V_DD² (charge C_L through M₂, discharge through M₁).\n* **Short‑circuit:** a current pulse flows for V_THN < V_in < V_DD−|V_THP| during a transition; minimized by keeping input slew ≈ output slew.\n* **Delays:**\n\n$$t_{pHL}\\simeq\\frac{C_LV_{DD}}{2 I_{D1,sat}}\\;\\propto\\frac{C_L}{\\beta_n(V_{DD}-V_{THN})},\\qquad \nt_{pLH}\\propto\\frac{C_L}{\\beta_p(V_{DD}-|V_{THP}|)}$$\n\nEqual rise/fall times again require (W/L)_p ≈ (μ_n/μ_p)(W/L)_n, the same ratio that centers V_M.\n\n## 7. Summary\n\nThe circuit is a **complementary CMOS inverter**: a push‑pull common‑source stage with full‑swing output, zero static power, symmetric and large noise margins (≈0.4 V_DD), a switching threshold set by √(β_p/β_n), and a high small‑signal voltage gain −(g_mn+g_mp)(r_on∥r_op) when biased in its transition region (the basis of the self‑biased inverter amplifier, ring oscillators, and all static CMOS logic).",
        "format": "markdown",
        "sha256": "8cf8202eef80a9dc7bfbd45e138194a6e5f4f75f9b2cb93cdb598786148b68d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and describes its complementary operation. The additional analysis is not required and does not contradict the essential answer.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 324,
        "output_tokens": 6240,
        "total_tokens": 6564,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3825,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 324,
        "output_tokens": 6240,
        "total_tokens": 6564,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3825,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the Circuit\n\nThe two devices form a **complementary (CMOS) inverter**:\n\n| Device | Type | Source | Drain | Gate |\n|---|---|---|---|---|\n| **M₂** | PMOS (arrow at source, bulk tied to V_DD) | V_DD | V_out | V_in |\n| **M₁** | NMOS | Ground | V_out | V_in |\n\nBoth gates are driven by V_in and both drains are tied together at V_out → a **push–pull inverting stage**. Since the gates draw no DC current, this is a *ratioless*, static logic gate.\n\n---\n\n## 1. Large‑Signal (Logic) Operation\n\n**V_in = 0 V:** V_GS1 = 0 → M₁ **off**; V_SG2 = V_DD > |V_THP| → M₂ **on** (deep triode). The output is pulled up through M₂ until no current flows, i.e. V_SD2 → 0:\n\n$$V_{out}=V_{OH}=V_{DD}$$\n\n**V_in = V_DD:** V_SG2 = 0 → M₂ **off**; M₁ **on** in triode. The output discharges until V_DS1 → 0:\n\n$$V_{out}=V_{OL}=0$$\n\nSo **V_out = NOT(V_in)**, with a *rail‑to‑rail* swing and **no static current path** (one transistor is always off) — the essential virtue of CMOS.\n\n---\n\n## 2. Voltage Transfer Characteristic (5 regions)\n\nUsing V_GS1 = V_in, V_DS1 = V_out, V_SG2 = V_DD−V_in, V_SD2 = V_DD−V_out:\n\n| Region | V_in range | M₁ | M₂ | V_out |\n|---|---|---|---|---|\n| A | V_in < V_THN | cutoff | triode | V_DD |\n| B | V_THN < V_in < V_M | **saturation** | triode | falls slowly |\n| C | V_in ≈ V_M | saturation | saturation | steep (high‑gain) drop |\n| D | V_M < V_in < V_DD−\\|V_THP\\| | triode | **saturation** | falls slowly |\n| E | V_in > V_DD−\\|V_THP\\| | triode | cutoff | 0 |\n\n(M₁ is saturated while V_out ≥ V_in − V_THN; M₂ is saturated while V_out ≤ V_in + |V_THP|.)\n\nIn every region the same current flows through both devices: **I_D1 = |I_D2|**.\n\n---\n\n## 3. Switching Threshold (Trip Point)\n\nIn region C both are saturated, so with β = μC_ox(W/L):\n\n$$\\tfrac12\\beta_n (V_M-V_{THN})^2=\\tfrac12\\beta_p (V_{DD}-V_M-|V_{THP}|)^2$$\n\n$$\\boxed{V_M=\\frac{V_{THN}+r\\,(V_{DD}-|V_{THP}|)}{1+r}},\\qquad r=\\sqrt{\\frac{\\beta_p}{\\beta_n}}=\\sqrt{\\frac{\\mu_p (W/L)_2}{\\mu_n (W/L)_1}}$$\n\n* For a **symmetric** inverter (V_M = V_DD/2 when V_THN = |V_THP|) we need β_p = β_n, i.e.\n **(W/L)₂ = (μ_n/μ_p)(W/L)₁ ≈ 2–3 ×(W/L)₁** — this is why the PMOS is drawn/sized wider.\n* Increasing (W/L)₂ raises V_M; increasing (W/L)₁ lowers it.\n\n---\n\n## 4. Gain and Noise Margins\n\nNear V_M both devices are saturated, so the small‑signal gain is the **push–pull** result\n\n$$A_v=-\\,(g_{m1}+g_{m2})\\,(r_{o1}\\!\\parallel\\! r_{o2})$$\n\nwhich is large (ideally infinite for λ = 0 → vertical transition). This is also why the same circuit, self‑biased at V_M, is used as a wide‑band **analog amplifier** (e.g., in ring oscillators, crystal oscillators, limiting amplifiers) — it gets 2g_m for one bias current.\n\nFor a matched inverter (β_n = β_p, V_THN = |V_THP| = V_t), setting dV_out/dV_in = −1 gives the classic results:\n\n$$V_{IL}=\\tfrac18(3V_{DD}+2V_t),\\qquad V_{IH}=\\tfrac18(5V_{DD}-2V_t)$$\n$$NM_H=NM_L=\\tfrac18(3V_{DD}+2V_t)$$\n\ne.g. V_DD = 5 V, V_t = 1 V → V_IL = 2.125 V, V_IH = 2.875 V, **NM ≈ 2.1 V (≈ 42 % of V_DD)** — near‑ideal noise immunity.\n\n---\n\n## 5. Power and Speed\n\n* **Static power ≈ 0** (only subthreshold/junction leakage).\n* **Dynamic power:** P = f·C_L·V_DD² (charging/discharging the load each cycle), plus\n* **Short‑circuit power:** for V_THN < V_in < V_DD−|V_THP| *both* devices conduct; the crowbar current peaks at V_in = V_M with I_peak ≈ ½β_n(V_M−V_THN)².\n* **Delays:** t_pHL ≈ 0.69 R_eqn C_L (discharge through M₁), t_pLH ≈ 0.69 R_eqp C_L (charge through M₂). Equal rise/fall times again require the PMOS to be ~2–3× wider.\n* **Input capacitance:** C_in ≈ C_ox(W₁L₁ + W₂L₂) + overlaps; DC input resistance is essentially infinite.\n\n---\n\n### Summary\nThe figure is a **static CMOS inverter**: M₂ (PMOS) is the pull‑up, M₁ (NMOS) the pull‑down, driven in antiphase by the common gate node. It realizes V_out = V̄_in with full logic swing (0 ↔ V_DD), zero static dissipation, high gain and symmetric noise margins, with the trip point V_M set by the ratio √(β_p/β_n).",
        "format": "markdown",
        "sha256": "6aa5b5c29732a5ef4ebdd04ecc9c1a8b9ceec6bb9e4c3d277b63562283933777"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and describes its inverting operation. The additional analysis does not contradict the essential answer.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 324,
        "output_tokens": 4718,
        "total_tokens": 5042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 324,
        "output_tokens": 4718,
        "total_tokens": 5042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Identification\n\nBoth devices are n‑channel MOSFETs whose **gates are tied together to V₍in₎**:\n\n| Device | Drain | Gate | Source | Role |\n|---|---|---|---|---|\n| **M₁** | V_DD | V_in | V_out | **Source follower** (common‑drain) – pulls the output *up* |\n| **M₂** | V_out | V_in | GND | Pulls the output *down* |\n\nSo this is a source follower whose \"tail\" element is **not** a constant current source but a transistor driven by the *same* input. The two devices are in series, so they always carry the **same drain current** (no dc load at the output), and the input node is purely capacitive (gates only).\n\n---\n\n# 1. Which regions do the devices operate in? (the key point)\n\n* **M₁:** V_DS1 = V_DD − V_out , V_OV1 = V_in − V_out − V_TH1 → saturation requires only V_DD ≥ V_in − V_TH1 ⇒ **M₁ is always saturated.**\n* **M₂:** saturation would require V_out ≥ V_in − V_TH2. But M₁ conducts only if V_in − V_out > V_TH1, i.e. V_out < V_in − V_TH1 ≤ V_in − V_TH2.\n\nThese two conditions contradict each other ⇒ **M₂ is always in the triode region** (it acts as a voltage‑controlled resistor). A follower can never lift its source above V_in − V_TH, which is exactly the edge of saturation for M₂. (If V_in < V_TH both devices are off and V_out = 0.)\n\n---\n\n# 2. Large‑signal transfer characteristic\n\nWith k = μ_nC_ox, a = (W/L)₁, b = (W/L)₂, x = V_in − V_TH (body effect and λ neglected):\n\n$$\\tfrac12 k\\,a\\,(x-V_{out})^2 \\;=\\; k\\,b\\Big[x V_{out}-\\tfrac{V_{out}^2}{2}\\Big]$$\n\n$$\\boxed{\\,V_{out}=\\Big[1-\\sqrt{\\tfrac{(W/L)_2}{(W/L)_1+(W/L)_2}}\\Big](V_{in}-V_{TH})\\,}$$\n\nRemarkable features:\n\n* The characteristic is **perfectly linear** in V_in (square‑law model), **non‑inverting**, with a **dc level shift of V_TH**.\n* The gain depends **only on device ratios** – not on k, not on current, not on V_DD.\n* Gain is always between 0 and 1 → it is an *attenuating* buffer/level shifter.\n\nBias current (the stack behaves like one NMOS with the series W/L):\n\n$$I_D=\\tfrac12 k\\,\\frac{ab}{a+b}(V_{in}-V_{TH})^2 ,\\qquad (W/L)_{eff}=\\frac{(W/L)_1(W/L)_2}{(W/L)_1+(W/L)_2}$$\n\nNote the current is input‑dependent → static power grows as (V_in−V_TH)².\n\n---\n\n# 3. Small‑signal analysis\n\nModels: M₁ saturated (g_m1 = ka·V_OV1, g_mb1, r_o1); M₂ triode (g_m2 = kb·V_DS2, g_ds2 = kb(V_OV2 − V_DS2) ≈ 1/R_on).\n\nKCL at the output node (v_g1 = v_g2 = v_in, drain of M₁ at ac ground):\n\n$$g_{m1}(v_{in}-v_{out})-(g_{mb1}+g_{ds1})v_{out}=g_{m2}v_{in}+g_{ds2}v_{out}$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}-g_{m2}}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}}$$\n\nSubstituting the bias point above reproduces exactly\n\n$$A_v=1-\\sqrt{\\frac{(W/L)_2}{(W/L)_1+(W/L)_2}}$$\n\n**Impedances**\n\n* R_in = ∞ (dc); C_in = C_gd1 + C_gs2 + (1 − A_v)(C_gs1 + C_gd2)\n* $R_{out}=\\dfrac{1}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}\\;\\approx\\;\\frac{1}{g_{m1}}\\Big\\|R_{on2}$ → **low output impedance** (good buffer, wide band, no Miller multiplication of C_gd1 since the drain is at V_DD).\n\n---\n\n# 4. Numerical check\n\nk = 100 µA/V², V_TH = 0.5 V, V_DD = 1.8 V, (W/L)₁ = (W/L)₂ = 10, V_in = 1.2 V:\n\n* A_v = 1 − √(10/20) = **0.293**, V_out = 0.293 × 0.7 = **0.205 V**\n* M₁: V_OV1 = 0.495 V, V_DS1 = 1.595 V → saturated ✔; M₂: V_OV2 = 0.7 V, V_DS2 = 0.205 V → triode ✔\n* I_D = 122.5 µA (same from both devices ✔)\n* g_m1 = 495 µS, g_m2 = 205 µS, g_ds2 = 495 µS → A_v = (495−205)/990 = 0.293 ✔, R_out ≈ 1.0 kΩ\n\n---\n\n# 5. Discussion / design notes\n\n* **Feed‑forward cancellation:** as V_in rises, M₁ tries to push the node up while M₂ pulls harder down. The partial cancellation (g_m1 − g_m2 in the numerator) is what reduces the gain below the usual follower value of ≈ g_m1/(g_m1+g_mb1).\n* **Textbook “both in saturation’’ shortcut:** if one (incorrectly) assumes both saturated, one gets A_v ≈ 1 − g_m2/g_m1 = 1 − √[(W/L)₂/(W/L)₁], which would predict zero gain for equal devices and *inversion* for (W/L)₂ > (W/L)₁. The region check in §1 shows the correct answer is the √[b/(a+b)] expression, which is always positive and < 1.\n* **Body effect** (bulk of M₁ grounded) raises V_TH1 as V_out rises; this lowers the gain further (extra g_mb1 in the denominator) and introduces mild nonlinearity — the main source of distortion in this stage.\n* **Use:** a compact, ratio‑accurate, non‑inverting **attenuating level shifter/buffer** (V_out ≈ A_v(V_in − V_TH)) with high input impedance and low output impedance; its drawbacks are the V_TH‑dependent offset, body‑effect nonlinearity, signal‑dependent supply current and inability to provide gain > 1.",
        "format": "markdown",
        "sha256": "e595e123d643a56d46d84beeb0ead5b43f20286d88cf28a775fa0d46d7151fbd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, recognizes the upper source follower and lower pull-down, and describes the circuit as a non-inverting attenuator rather than a normal CMOS inverter. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 324,
        "output_tokens": 11902,
        "total_tokens": 12226,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9509,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 324,
        "output_tokens": 11902,
        "total_tokens": 12226,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9509,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the topology\n\nBoth devices are **NMOS** and both gates are tied to the *same* input:\n\n| | gate | drain | source | function |\n|---|---|---|---|---|\n| **M₁** | V_in | V_DD | V_out | **source follower** (common‑drain) |\n| **M₂** | V_in | V_out | GND | grounded‑source device acting as the **load** |\n\nSince nothing else is connected to the output node, the two transistors are in series and carry the **same current**:\n\n$$V_{GS1}=V_{in}-V_{out},\\qquad V_{DS1}=V_{DD}-V_{out},\\qquad V_{GS2}=V_{in},\\qquad V_{DS2}=V_{out}$$\n\n## 2. Which regions are the devices in?  (the key step)\n\n**M₂ can never saturate.** Saturation would need \\(V_{out}\\ge V_{in}-V_{TH}\\), i.e. the source‑follower output above its own overdrive — impossible, because M₁ conducts only if \\(V_{out}<V_{in}-V_{TH}\\). ⟹ **M₂ is always in the triode region.**\n\n**M₁ is always saturated:** \\(V_{DS1}\\ge V_{GS1}-V_{TH}\\Rightarrow V_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{TH}\\Rightarrow V_{in}\\le V_{DD}+V_{TH}\\) ✔\n\n*(A common mistake is to put both in saturation; that gives the wrong answer \\(A_v=1-\\sqrt{\\beta_2/\\beta_1}\\).)*\n\n## 3. Large‑signal solution\n\nLet \\(\\beta_i=(W/L)_i\\), \\(u\\equiv V_{in}-V_{TH}\\), \\(x\\equiv V_{out}\\), λ = 0, no body effect.\n\n$$\\tfrac12\\mu_nC_{ox}\\beta_1(u-x)^2=\\mu_nC_{ox}\\beta_2\\Big[ux-\\tfrac{x^2}{2}\\Big]$$\n\n$$\\Rightarrow (\\beta_1+\\beta_2)x^{2}-2u(\\beta_1+\\beta_2)x+\\beta_1u^{2}=0$$\n\n$$\\boxed{\\;V_{out}=(V_{in}-V_{TH})\\left[1-\\sqrt{\\frac{(W/L)_2}{(W/L)_1+(W/L)_2}}\\right]\\;}\\qquad (V_{in}>V_{TH})$$\n\nand for \\(V_{in}\\le V_{TH}\\) both devices are off, \\(V_{out}=0\\).\n\nSupply current:\n$$I_D=\\frac{\\mu_nC_{ox}}{2}\\,\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}(V_{in}-V_{TH})^2$$\n(the aspect ratios combine like series conductances).\n\n## 4. Gain\n\n$$A_v=\\frac{\\partial V_{out}}{\\partial V_{in}}=1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}=1-\\frac{1}{\\sqrt{1+\\beta_1/\\beta_2}}$$\n\n* **Positive (non‑inverting) and always < 1** – the circuit is an attenuating buffer, not an amplifier.\n* \\( \\beta_1=\\beta_2\\Rightarrow A_v=1-1/\\sqrt2=0.29\\); \\(\\beta_1=4\\beta_2\\Rightarrow A_v=0.55\\); \\(\\beta_1\\gg\\beta_2\\Rightarrow A_v\\to1\\) (pure follower); \\(\\beta_2\\gg\\beta_1\\Rightarrow A_v\\to0\\).\n* Remarkably, \\(V_{out}\\) is an **exactly linear** function of \\(V_{in}\\) (the square‑law nonlinearities cancel): a distortion‑free level‑shifting attenuator.\n\n**Small‑signal check** (M₁: \\(g_{m1}=\\mu_nC_{ox}\\beta_1(u-x)\\); M₂ in triode: \\(g_{m2}=\\mu_nC_{ox}\\beta_2x\\), \\(r_{on2}^{-1}=\\mu_nC_{ox}\\beta_2(u-x)\\)):\n\n$$g_{m1}(v_{in}-v_{out})=g_{m2}v_{in}+\\frac{v_{out}}{r_{on2}}\\;\\Rightarrow\\;A_v=\\frac{\\beta_1(u-x)-\\beta_2x}{(\\beta_1+\\beta_2)(u-x)}=1-\\sqrt{\\tfrac{\\beta_2}{\\beta_1+\\beta_2}}\\;\\checkmark$$\n\nOutput resistance (looking into the node):\n$$R_{out}=\\frac{1}{g_{m1}}\\;\\Big\\|\\;r_{on2}=\\frac{1}{\\mu_nC_{ox}(\\beta_1+\\beta_2)(V_{in}-V_{TH}-V_{out})}\\;\\;(\\text{low, few hundred }\\Omega)$$\n\n## 5. Numerical example\nμ_nC_ox = 200 µA/V², V_TH = 0.4 V, (W/L)₁ = 20, (W/L)₂ = 5, V_in = 1.2 V:\nA_v = 1 − 1/√5 = 0.553 → V_out = 0.553(0.8) = 0.44 V, I_D = 256 µA, g_m1 = 1.43 mS, R_out ≈ 560 Ω.\n\n## 6. Interpretation\n\n* Transfer characteristic: flat at 0 until \\(V_{in}=V_{TH}\\), then a **straight line of slope \\(A_v<1\\)**.\n* It behaves as a **non‑inverting, low‑output‑impedance attenuator / level shifter**: M₁ pulls up in proportion to \\(V_{in}\\), but M₂’s channel conductance rises with the same \\(V_{in}\\), so the output can never follow one‑for‑one.\n* It burns **static current** that grows as \\((V_{in}-V_{TH})^2\\) — no use as a logic gate or a gain stage.\n* Second‑order effects: with the bulk of M₁ grounded, body effect raises \\(V_{TH1}\\) with \\(V_{out}\\) and lowers the slope further (≈ divide by \\(1+\\eta\\)); channel‑length modulation changes the numbers only slightly, since M₁ stays in saturation and M₂ in triode throughout.",
        "format": "markdown",
        "sha256": "a322ffa058daec70504b8de286663af516b3bce67407c241cf9313a176ecf101"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper source-follower and lower pull-down actions, and concludes this is not a normal CMOS inverter, satisfying the full-credit rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 324,
        "output_tokens": 12448,
        "total_tokens": 12772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10220,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 324,
        "output_tokens": 12448,
        "total_tokens": 12772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10220,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit actually is\n\nBoth devices are **n‑channel** MOSFETs and **both gates are tied to V_in**:\n\n| | drain | gate | source |\n|---|---|---|---|\n| **M₁** | V_DD | V_in | V_out |\n| **M₂** | V_out | V_in | ground |\n\nSo M₁ is a **source follower (common‑drain)** and M₂ is a grounded‑source device whose **drain is the output node**. Equivalently: *two transistors in series with a common gate, with the output taken at the middle node.* Because the output terminal draws no DC current,\n\n$$I_{D1}=I_{D2}=I_D$$\n\n## 2. Operating regions (this is the key step)\n\n**M₁:** saturation requires V_DS1 ≥ V_GS1 – V_TH1, i.e.\n$$V_{DD}-V_{out}\\;\\ge\\;V_{in}-V_{out}-V_{TH1}\\;\\Longrightarrow\\;V_{DD}+V_{TH1}\\ge V_{in}$$\n→ **M₁ is always saturated** (for any V_in ≤ V_DD).\n\n**M₂:** its drain voltage is set by the follower, V_out = V_in – V_GS1 = V_in – V_TH1 – V_ov1, which is *less* than V_GS2 – V_TH2 = V_in – V_TH2. Hence\n$$V_{DS2}<V_{GS2}-V_{TH2}\\;\\Longrightarrow\\;\\boxed{\\text{M}_2 \\text{ is always in the triode region}}$$\n\nM₂ therefore acts as a **voltage‑controlled resistive load** for the follower (it can never be a saturated current source here).\n\n## 3. Large‑signal transfer characteristic (square law, λ = 0, body effect ignored)\n\nWith S₁ = (W/L)₁, S₂ = (W/L)₂, x ≡ V_in – V_TH:\n\n$$\\tfrac12 k_n'S_1(x-V_{out})^2=k_n'S_2\\!\\left[xV_{out}-\\tfrac{V_{out}^2}{2}\\right]$$\n\n$$\\Rightarrow\\;V_{out}^2-2xV_{out}+\\frac{S_1}{S_1+S_2}x^2=0\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{out}=\\Big(1-\\sqrt{\\tfrac{S_2}{S_1+S_2}}\\Big)(V_{in}-V_{TH})}$$\n\n(valid for V_in ≥ V_TH; for V_in < V_TH both devices are off and V_out = 0).\n\nThe characteristic is a **straight line** – the circuit is a *linear, non‑inverting attenuator / level shifter*, and (to first order) **independent of V_DD** (good supply rejection).\n\nThe current is that of the series stack, as expected:\n$$I_D=\\tfrac12 k_n'\\frac{S_1S_2}{S_1+S_2}(V_{in}-V_{TH})^2 \\qquad\\left(\\tfrac1{S_{eff}}=\\tfrac1{S_1}+\\tfrac1{S_2}\\right)$$\n\n## 4. Small‑signal gain\n\nNode equation at V_out (M₁’s drain is an ac ground):\n\n$$g_{m1}(v_{in}-v_{out})-\\frac{v_{out}}{r_{o1}}-g_{mb1}v_{out}=g_{m2}v_{in}+g_{ds2}v_{out}$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}-g_{m2}}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}=(g_{m1}-g_{m2})\\Big[\\tfrac{1}{g_{m1}+g_{mb1}}\\;\\|\\;r_{o1}\\;\\|\\;\\tfrac1{g_{ds2}}\\Big]}$$\n\nThe two transconductances **subtract**: M₁ pushes the output up, M₂ pulls it down with the same input.\n\nUsing the triode values g_m2 = k_n′S₂V_out, g_ds2 = k_n′S₂(x–V_out) and g_m1 = k_n′S₁(x–V_out), this reduces exactly to the slope found above:\n\n$$A_v=1-\\sqrt{\\frac{S_2}{S_1+S_2}}\\qquad (0<A_v<1)$$\n\n* S₂ → 0: A_v → 1 (pure source follower)\n* S₁ = S₂: A_v = 1 – 1/√2 ≈ **0.29**\n* S₂ ≫ S₁: A_v ≈ S₁/2S₂ → 0 (heavy triode load)\n\nBody effect (bulks at ground) adds g_mb1 and lowers the gain by ≈ 1/(1+η); λ ≠ 0 adds g_ds1 and makes V_out slightly V_DD‑dependent.\n\n*(If one naively forces both devices into saturation, as some textbook problems instruct, the same node equation gives A_v = 1 – g_m2/g_m1 = 1 – √(S₂/S₁) — but as shown in §2 that bias condition cannot physically occur.)*\n\n## 5. Impedances\n\n$$R_{in}=\\infty \\;(\\text{dc}),\\qquad \nR_{out}=\\frac{1}{g_{m1}+g_{mb1}}\\;\\|\\;r_{o1}\\;\\|\\;R_{on2}\\;\\approx\\;\\frac{1}{g_{m1}}\\;\\|\\;R_{on2}$$\n\ni.e. a **low output impedance** (hundreds of ohms) – it can drive a load, but it provides **no voltage gain**.\n\n## 6. Numerical example\n\nk_n′ = 200 µA/V², V_TH = 0.4 V, V_DD = 1.8 V, (W/L)₁ = (W/L)₂ = 10, V_in = 1.2 V:\n\n* V_ov = 0.8 V → V_out = 0.293 × 0.8 ≈ **0.23 V**\n* I_D = ½(200 µ)(5)(0.8²) = **320 µA**\n* V_ov1 = x – V_out = 0.566 V → g_m1 = 1.13 mA/V, R_on2 = 884 Ω\n* A_v ≈ **0.29**, R_out ≈ 1/g_m1 ∥ R_on2 ≈ **0.44 kΩ**\n\n## 7. Summary\n\n* M₁ = source follower, M₂ = triode (resistive) load driven by the same input; it is just a common‑gate series stack with the output at the mid‑node.\n* M₁ is always saturated, M₂ always in triode.\n* V_out = (1 – √[S₂/(S₁+S₂)])(V_in – V_TH): a **linear, non‑inverting attenuator** with gain < 1, set only by the W/L ratio, essentially independent of V_DD.\n* Low output resistance (≈1/g_m1 ∥ R_on2), infinite dc input resistance; useful as a ratio‑defined level shifter/attenuator or buffer, **not** as a gain stage (the two g_m’s cancel; equal devices with equal V_GS would give zero gain).",
        "format": "markdown",
        "sha256": "ce5fe78fe3f6b927eff1f3d60284227ce6d0a2f72a5f0ac5bd9ac10baa236ad9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, recognizes the upper source-follower and lower pull-down actions, and concludes the circuit is a non-inverting attenuator rather than a normal CMOS inverter, satisfying the full-credit rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 324,
        "output_tokens": 15362,
        "total_tokens": 15686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 324,
        "output_tokens": 15362,
        "total_tokens": 15686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n* **M1** – NMOS, source at ground, gate driven by $V_{in}$, drain at $V_{out}$ → **common‑source (CS) amplifier**.\n* **M2** – PMOS with source at $V_{DD}$ and **gate tied to its own drain** → **diode‑connected PMOS**, acting as the **load** (\"active load\" / ratioed load).\n\nSo this is a **CS stage with a diode‑connected PMOS load** — the classic \"ratioed\" inverting amplifier. Both devices carry the same current, $I_{D1}=I_{D2}=I_D$.\n\n---\n\n## 2. DC / large‑signal behaviour\n\nM2 is diode‑connected, so $|V_{DS2}|=|V_{GS2}|>|V_{GS2}|-|V_{TH2}|$ → **M2 is always saturated** (as long as it conducts).\n\n$$V_{out}=V_{DD}-|V_{GS2}|$$\n\n**Regions:**\n\n| $V_{in}$ | M1 | $V_{out}$ |\n|---|---|---|\n| $<V_{TH1}$ | off | $V_{out}\\to V_{DD}-\\lvert V_{TH2}\\rvert$ (not $V_{DD}$!) |\n| $V_{TH1}<V_{in}$, $V_{out}>V_{in}-V_{TH1}$ | saturation | **amplifying region** |\n| $V_{out}<V_{in}-V_{TH1}$ | triode | gain collapses |\n\nWith both in saturation (ignoring $\\lambda$):\n\n$$\\tfrac12\\mu_nC_{ox}\\Big(\\tfrac{W}{L}\\Big)_1\\!(V_{in}-V_{TH1})^2=\\tfrac12\\mu_pC_{ox}\\Big(\\tfrac{W}{L}\\Big)_2\\!\\big(V_{DD}-V_{out}-|V_{TH2}|\\big)^2$$\n\n$$\\boxed{V_{out}=V_{DD}-|V_{TH2}|-\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}\\;(V_{in}-V_{TH1})}$$\n\nThe transfer characteristic is a **straight line** → the stage is inherently **very linear**, with a slope (gain) set only by device ratios, *not* by the bias current.\n\n---\n\n## 3. Small‑signal analysis\n\nThe diode connection makes M2 look like a resistor $1/g_{m2}\\,\\|\\,r_{o2}$ (no body effect if the n‑well is tied to the source at $V_{DD}$).\n\n$$R_{in}=\\infty \\qquad R_{out}=\\frac{1}{g_{m2}}\\,\\Big\\|\\,r_{o1}\\,\\Big\\|\\,r_{o2}\\;\\simeq\\;\\frac{1}{g_{m2}}$$\n\n$$A_v=-g_{m1}\\left(\\frac{1}{g_{m2}}\\|r_{o1}\\|r_{o2}\\right)\\;\\simeq\\;-\\frac{g_{m1}}{g_{m2}}$$\n\nWriting $g_m=2I_D/V_{ov}$ and $g_m=\\sqrt{2\\mu C_{ox}(W/L)I_D}$:\n\n$$A_v\\simeq-\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}=-\\frac{|V_{ov2}|}{V_{ov1}}$$\n\n**Key point:** the gain is independent of $I_D$ → constant gain, excellent linearity, but **low gain**.\n\n*Example:* $\\mu_n/\\mu_p=2$, $(W/L)_1/(W/L)_2=8 \\Rightarrow |A_v|=\\sqrt{16}=4$ (12 dB). Doubling the gain requires a **4×** larger ratio → gain of 10 needs $(W/L)_1\\approx 50(W/L)_2$: huge area and input capacitance.\n\n---\n\n## 4. Frequency response\n\nThe low output resistance $\\approx 1/g_{m2}$ gives a high output pole:\n\n$$\\omega_{p,out}\\approx\\frac{g_{m2}}{C_L},\\qquad \\text{GBW}\\approx\\frac{g_{m1}}{C_L}$$\n\nSo the stage trades gain for **bandwidth** — it is fast and well‑behaved (a good candidate for broadband/open‑loop linear stages).\n\n---\n\n## 5. Limitations\n\n1. **Output swing:** the top of the swing is clamped at $V_{DD}-|V_{TH2}|$ (M2 stops conducting below one threshold), and the bottom at $V_{in}-V_{TH1}$. Poor headroom, worsening at low $V_{DD}$.\n2. **Low gain:** $|A_v|$ grows only as the *square root* of the W/L ratio.\n3. **Gain–swing trade‑off:** large gain ⇒ large $V_{ov2}$ ⇒ less headroom.\n4. **Poor PSRR:** with $v_{in}=0$, $v_{out}/v_{dd}=g_{m2}/(g_{m2}+1/r_{o1}+1/r_{o2})\\approx 1$ — supply noise passes almost directly to the output.\n5. **Process/temperature tracking:** gain depends on $\\mu_n/\\mu_p$, which varies with process and temperature (~±20 %).\n\n---\n\n## 6. Summary\n\n| Quantity | Result |\n|---|---|\n| Function | Inverting (180° phase) linear amplifier, \"ratioed\" CS stage |\n| $A_v$ | $-g_{m1}\\big(\\frac{1}{g_{m2}}\\|r_{o1}\\|r_{o2}\\big)\\approx-\\sqrt{\\mu_n(W/L)_1/\\mu_p(W/L)_2}$ |\n| $R_{in}$ | $\\infty$ (gate) |\n| $R_{out}$ | $\\approx 1/g_{m2}$ (low) |\n| Max $V_{out}$ | $V_{DD}-|V_{TH2}|$ |\n| Min $V_{out}$ | $V_{in}-V_{TH1}$ (edge of M1 triode) |\n| Strengths | Linear, bias‑independent gain, wide bandwidth, low $R_{out}$ |\n| Weaknesses | Low gain, reduced swing, poor supply rejection |\n\nIf higher gain is needed, the diode load is replaced by a **current‑source (PMOS with fixed $V_B$) load**, giving $A_v=-g_{m1}(r_{o1}\\|r_{o2})$, or a **cascode** load for even more gain — at the cost of linearity and headroom.",
        "format": "markdown",
        "sha256": "06b3977d4326927513a1fcd6c349b6c008fc6fb249eb89a908e4b50b8c5b4483"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the correct inverting gain, including channel-length modulation consistently. The ancillary idealized large-signal claims do not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 792,
        "output_tokens": 4701,
        "total_tokens": 5493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2403,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 792,
        "output_tokens": 4701,
        "total_tokens": 5493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2403,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the Topology\n\n| Device | Connection | Role |\n|---|---|---|\n| **M₁** (NMOS) | source → ground, gate → V_in, drain → V_out | **Common‑source driver** (transconductor) |\n| **M₂** (PMOS) | source → V_DD, **gate tied to drain**, drain → V_out | **Diode‑connected load** |\n\nSo this is a **common‑source stage with a diode‑connected (PMOS) active load**. The load is not a current source — because its gate follows its drain, it behaves as a two‑terminal resistor of value ≈ 1/g_m2.\n\nNote that the bulk of M₂ sits in an n‑well tied to V_DD = its own source, so **M₂ suffers no body effect** (this is the advantage of using a PMOS rather than an NMOS diode load).\n\n---\n\n## 2. Operating Regions\n\n**M₂ is *always* in saturation when it conducts**, since V_GD2 = 0 ⇒ |V_DS2| = |V_GS2| > |V_GS2| − |V_TH2|.\n\n**M₁** is cut off for V_in < V_TH1, saturated for moderate V_in, and enters triode when V_out < V_in − V_TH1.\n\n---\n\n## 3. Large‑Signal Transfer Characteristic\n\nWith M₁ saturated and both currents equal:\n\n$$\\tfrac12\\mu_nC_{ox}\\Big(\\tfrac{W}{L}\\Big)_1(V_{in}-V_{TH1})^2=\\tfrac12\\mu_pC_{ox}\\Big(\\tfrac{W}{L}\\Big)_2\\big(V_{DD}-V_{out}-|V_{TH2}|\\big)^2$$\n\nSolving for V_out:\n\n$$\\boxed{V_{out}=V_{DD}-|V_{TH2}|-\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}\\;(V_{in}-V_{TH1})}$$\n\n**Key observation:** the characteristic is a **straight line** (to first order) — the square‑law of M₁ is \"undone\" by the square‑law of M₂. Hence this stage is a very *linear* amplifier, at the cost of low gain.\n\n**Maximum output:** if V_in < V_TH1, I_D = 0, so |V_GS2| collapses to |V_TH2| and\n\n$$V_{out,max}=V_{DD}-|V_{TH2}|$$\n\nThe output **cannot reach V_DD** — one threshold of headroom is lost at the top. The minimum output is set by M₁ in deep triode (≈ 0).\n\n---\n\n## 4. Small‑Signal Gain\n\nReplace M₂ by its diode equivalent, 1/g_m2 ∥ r_o2:\n\n$$A_v=-g_{m1}\\left(\\frac{1}{g_{m2}}\\,\\Big\\|\\,r_{o1}\\,\\Big\\|\\,r_{o2}\\right)\\simeq-\\frac{g_{m1}}{g_{m2}}$$\n\nSince both transistors carry the **same** drain current I_D, using $g_m=\\sqrt{2\\mu C_{ox}(W/L)I_D}$:\n\n$$\\boxed{A_v\\simeq-\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}=-\\frac{|V_{ov2}|}{V_{ov1}}}$$\n\n**The gain is independent of bias current** — it is set only by device geometry and mobility ratio (the same slope found from the large‑signal equation, as it must be).\n\n*Example:* μ_nC_ox = 200 µA/V², μ_pC_ox = 100 µA/V², (W/L)₁ = 100, (W/L)₂ = 10 ⇒ |A_v| = √20 ≈ 4.5 (13 dB).\n\n---\n\n## 5. Output Resistance and Bandwidth\n\n$$R_{out}=\\frac{1}{g_{m2}}\\,\\|\\,r_{o1}\\,\\|\\,r_{o2}\\;\\approx\\;\\frac{1}{g_{m2}}$$\n\nThis is **low**, so\n\n* the stage drives capacitive/resistive loads well,\n* the output pole ω_p ≈ g_m2/C_L is at high frequency ⇒ **wide bandwidth**,\n* but the voltage gain is correspondingly small.\n\n(Gain–bandwidth ≈ g_m1/C_L, the same as any CS stage.)\n\n---\n\n## 6. Design Trade‑offs\n\n1. **Gain grows only as the square root** of the W/L ratio: a gain of 10 needs (W/L)₁/(W/L)₂ ≈ 100·(μ_p/μ_n) ≈ 200 — huge devices and large input capacitance.\n2. **Gain vs. swing:** |A_v| = |V_ov2|/V_ov1. High gain requires a large |V_ov2|, but the DC output level is V_DD − |V_TH2| − |V_ov2|, so headroom shrinks directly as gain rises.\n3. **Lost headroom:** V_out ≤ V_DD − |V_TH2| always.\n4. **Good linearity and good gain accuracy** — A_v depends on a ratio of like quantities (μ ratio and W/L ratio), not on I_D, V_TH, or supply.\n\n---\n\n## 7. Summary\n\nThis is a **common‑source amplifier with a diode‑connected PMOS load**: an inverting stage with\n\n* **A_v ≈ −g_m1/g_m2 = −√[μ_n(W/L)₁ / μ_p(W/L)₂]** (bias‑independent, typically 2–10),\n* **R_out ≈ 1/g_m2** (low), wide bandwidth,\n* **highly linear** transfer characteristic,\n* output swing limited to [≈0, V_DD − |V_TH2|].\n\nIt is used where *predictable, moderate, low‑distortion gain* and *speed* matter more than high gain; for high gain one replaces M₂ with a current‑source load (gate tied to a fixed bias), giving A_v = −g_m1(r_o1∥r_o2) at the price of poorer gain accuracy and a higher‑impedance output node.",
        "format": "markdown",
        "sha256": "1de6122f619d13ecc4bbb0e5313e0ec50263d9897e1a9e75012d9a2afb5a2b8a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both devices’ output resistances, as required for full credit. The additional ideal square-law and large-signal remarks do not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 792,
        "output_tokens": 3743,
        "total_tokens": 4535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 792,
        "output_tokens": 3743,
        "total_tokens": 4535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n* **M₁** – NMOS, source at ground, gate driven by $V_{in}$, drain at $V_{out}$ → **common‑source (CS) driver**.\n* **M₂** – PMOS with source at $V_{DD}$ and **gate tied to its own drain** (the wire on the left goes down to the output node) → **diode‑connected PMOS load**.\n\nSo this is a **common‑source stage with a diode‑connected (PMOS) load** — a \"self‑biased\" inverting amplifier whose gain is set by device *ratios*, not by a resistor.\n\nKey point: a diode‑connected transistor is always in saturation ($|V_{DS}|=|V_{GS}|>|V_{GS}|-|V_{TH}|$) and behaves as a two‑terminal resistor\n\n$$R_{M2}=\\frac{1}{g_{m2}}\\;\\Big\\|\\;r_{o2}\\;\\approx\\;\\frac{1}{g_{m2}}$$\n\nBecause the PMOS sits in its own n‑well with bulk tied to its source ($V_{DD}$), **there is no body effect** in the load (an NMOS diode load would be degraded by $1/(1+\\eta)$).\n\n## 2. Bias / large‑signal transfer characteristic\n\nWith $I_{D1}=I_{D2}=I_D$ (λ ≈ 0):\n\n$$\\tfrac12\\mu_nC_{ox}\\Big(\\tfrac{W}{L}\\Big)_1\\!\\big(V_{in}-V_{THN}\\big)^2=\\tfrac12\\mu_pC_{ox}\\Big(\\tfrac{W}{L}\\Big)_2\\!\\big(V_{DD}-V_{out}-|V_{THP}|\\big)^2$$\n\nTaking the square root of both sides:\n\n$$\\boxed{V_{out}=V_{DD}-|V_{THP}|-\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}\\;\\big(V_{in}-V_{THN}\\big)}$$\n\nThe VTC is **a straight line** in the active region — the small‑signal gain is *independent of bias point*, i.e. the stage is unusually **linear** (for ideal square‑law devices).\n\n| Region | Condition | Behaviour |\n|---|---|---|\n| 1 | $V_{in}<V_{THN}$ | M₁ off, $I_D\\to0$, so $|V_{GS2}|\\to|V_{THP}|$: $V_{out}=V_{DD}-|V_{THP}|$ (output cannot reach $V_{DD}$) |\n| 2 | $V_{THN}<V_{in}$, $V_{out}>V_{in}-V_{THN}$ | M₁ sat, M₂ sat → linear VTC, slope $=-g_{m1}/g_{m2}$ |\n| 3 | $V_{out}<V_{in}-V_{THN}$ | M₁ in triode; gain collapses, $V_{out}\\approx I_D R_{on1}$ |\n\nEdge of saturation of M₁ (with $A=\\sqrt{\\mu_n(W/L)_1/\\mu_p(W/L)_2}$):\n\n$$V_{out,\\min}=\\frac{V_{DD}-|V_{THP}|}{1+A},\\qquad V_{in,\\max}=V_{THN}+\\frac{V_{DD}-|V_{THP}|}{1+A}$$\n\n## 3. Small‑signal analysis\n\nKCL at the output ($v_{gs2}=v_{out}$, source of M₂ is an ac ground):\n\n$$g_{m1}v_{in}+ (g_{m2}+g_{o1}+g_{o2})\\,v_{out}=0$$\n\n$$A_v=\\frac{v_{out}}{v_{in}}=-\\frac{g_{m1}}{g_{m2}+g_{o1}+g_{o2}}\\;\\approx\\;-\\frac{g_{m1}}{g_{m2}}=-g_{m1}\\Big(\\frac{1}{g_{m2}}\\Big\\|r_{o1}\\Big\\|r_{o2}\\Big)$$\n\nExpressed three equivalent ways:\n\n$$|A_v|=\\frac{g_{m1}}{g_{m2}}=\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}=\\frac{V_{ov2}}{V_{ov1}}$$\n\n* **Input impedance:** ∞ (dc), capacitive: $C_{in}=C_{gs1}+(1+|A_v|)C_{gd1}$ (Miller).\n* **Output impedance:** $R_{out}=\\dfrac{1}{g_{m2}}\\|r_{o1}\\|r_{o2}\\approx\\dfrac{1}{g_{m2}}$ — **low**, so the stage drives loads well.\n* **Bandwidth:** dominant pole $\\omega_p\\approx g_{m2}/C_{L}$ → wide band (the price of low gain).\n* **Noise:** load noise referred to the input scales as $(g_{m2}/g_{m1})^2$, so a large $g_{m1}/g_{m2}$ (large gain) also improves noise.\n\n## 4. Numerical example\n\n$V_{DD}=1.8$ V, $V_{THN}=|V_{THP}|=0.45$ V, $\\mu_nC_{ox}=200\\,\\mu$A/V², $\\mu_pC_{ox}=80\\,\\mu$A/V², $(W/L)_1=20$, $(W/L)_2=4$, $I_D=100\\,\\mu$A.\n\n* $V_{ov1}=\\sqrt{2I_D/(200\\mu\\cdot20)}=0.224$ V → $V_{in}=0.67$ V\n* $V_{ov2}=\\sqrt{2I_D/(80\\mu\\cdot4)}=0.79$ V → $V_{out}=1.8-0.45-0.79=0.56$ V (M₁ saturated since 0.56 > 0.224 ✓)\n* $g_{m1}=2I_D/V_{ov1}=894\\ \\mu$S, $g_{m2}=253\\ \\mu$S\n* $A_v\\approx-894/253=-3.5$ (= $\\sqrt{200\\cdot20/(80\\cdot4)}$ ✓), $R_{out}\\approx4$ kΩ\n* With $C_L=100$ fF: $f_{-3dB}\\approx g_{m2}/2\\pi C_L\\approx 0.4$ GHz\n\n## 5. Trade‑offs (why this stage is used / avoided)\n\n**Advantages**\n* Gain set by $\\sqrt{(W/L)_1/(W/L)_2}$ → accurate, process/temperature/bias‑insensitive, good matching.\n* Highly **linear** (gain independent of signal level under square law).\n* **Low output impedance**, wide bandwidth, self‑biased (no extra bias network).\n\n**Disadvantages**\n* **Low gain**: it grows only as the *square root* of the W/L ratio — a gain of 10 needs $(W/L)_1/(W/L)_2 \\approx 10^2/(\\mu_n/\\mu_p)\\approx 30$–50, i.e. huge device ratios and large capacitance.\n* **Gain–headroom conflict:** $|A_v|=V_{ov2}/V_{ov1}$, but the load eats $|V_{THP}|+V_{ov2}$ of supply, so more gain ⇒ lower allowed $V_{out}$.\n* Output high level clamps at $V_{DD}-|V_{THP}|$ (one threshold of lost swing).\n* Usable input range is tiny: $\\Delta V_{in}\\approx (V_{DD}-|V_{THP}|)/(1+A)$.\n\n**When higher gain is needed**, the diode load is replaced by (or paralleled with) a current source: $A_v=-g_{m1}(r_{o1}\\|r_{o2})$, trading linearity and bandwidth for gain.",
        "format": "markdown",
        "sha256": "df8a315371b50ab89f0ac6bb8bafeb311f5ce2d7bab901be985853e7aaf0c1fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation treated consistently. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 792,
        "output_tokens": 7277,
        "total_tokens": 8069,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 792,
        "output_tokens": 7277,
        "total_tokens": 8069,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\nBoth devices are **PMOS** transistors (the arrow sits on the *source* terminal, pointing into the device, and both sources are the **upper** terminals):\n\n| Device | Source | Gate | Drain | Role |\n|---|---|---|---|---|\n| **M₂** | V_DD (ac ground) | V_in | V_out | **Common‑source stage** (input device) |\n| **M₁** | V_out | GND | GND | **Diode‑connected load** (gate–drain shorted) |\n\nSince M₁'s gate and drain are both tied to ground, V_GD1 = 0 → M₁ is diode‑connected and is therefore automatically in saturation whenever it conducts. The two devices carry the same current, I_D1 = I_D2 = I_D.\n\nSo this is a **PMOS common‑source amplifier with a diode‑connected PMOS load.**\n\n## 2. Bias conditions\n\n* M₁ (diode): V_SG1 = V_out ⇒ conducts only if **V_out > |V_TH|**\n I_D = ½ μ_pC_ox(W/L)₁ (V_out − |V_TH|)²\n* M₂: V_SG2 = V_DD − V_in, V_SD2 = V_DD − V_out; saturation requires\n **V_in < V_DD − |V_TH|** and **V_out ≤ V_in + |V_TH|**\n I_D = ½ μ_pC_ox(W/L)₂ (V_DD − V_in − |V_TH|)²\n\n## 3. Large‑signal transfer characteristic\n\nEquating the two currents (λ = 0):\n\n$$(V_{out}-|V_{TH}|)\\sqrt{(W/L)_1}=(V_{DD}-V_{in}-|V_{TH}|)\\sqrt{(W/L)_2}$$\n\n$$\\boxed{V_{out}=|V_{TH}|+\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\,\\bigl(V_{DD}-V_{in}-|V_{TH}|\\bigr)}$$\n\nThe characteristic is a **straight line** – the gain does not depend on the bias point, so the stage is quite linear (this is the main attraction of a diode‑connected load).\n\n## 4. Small‑signal analysis\n\nLooking **into the source** of M₁ (its gate and drain are ac grounds), a test voltage v_x gives\ni_x = (g_m1 + g_mb1 + 1/r_O1)v_x, hence\n\n$$R_{load}=\\frac{1}{g_{m1}+g_{mb1}}\\;\\|\\;r_{O1}$$\n\nM₂ is a CS device with g_m2 and r_O2, so\n\n$$A_v=-g_{m2}\\left[\\frac{1}{g_{m1}+g_{mb1}}\\;\\|\\;r_{O1}\\;\\|\\;r_{O2}\\right]$$\n\nNeglecting channel‑length modulation and body effect (each PMOS well tied to its own source):\n\n$$\\boxed{A_v\\simeq-\\frac{g_{m2}}{g_{m1}}=-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}=-\\sqrt{\\frac{W_2L_1}{W_1L_2}}}$$\n\nwhich agrees with the slope of the large‑signal result (both devices carry the same I_D and have the same μ_pC_ox, so g_m ∝ √(W/L)).\n\n**Impedances:** R_in = ∞ (gate input); R_out = (1/g_m1)‖r_O1‖r_O2 ≈ 1/g_m1 (low – good for driving following stages).\n\n## 5. Remarks\n\n* **Gain is low and set only by device geometry** – a factor‑of‑4 gain needs a 16:1 ratio of W/L, so this topology trades gain for linearity and well‑defined gain.\n* If the n‑well of M₁ is tied to V_DD instead of its source, body effect reduces the gain to −g_m2/(g_m1+g_mb1).\n* **Output swing:** V_out must stay above |V_TH| (or M₁ shuts off) and below V_in + |V_TH| (or M₂ enters the triode region).\n* Example: if (W/L)₂ = 4(W/L)₁, then A_v ≈ −2.",
        "format": "markdown",
        "sha256": "9d585613de68f0b06296cc3358020e4027c87f79a7b14df72a046f4dc5f15598"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, and M1 as a diode-connected PMOS load to ground. It gives the required gm/gm gain, Av ≈ −gm2/gm1, with an appropriate current-balance explanation; the additional bias and small-signal details do not undermine the central analysis.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1848,
        "output_tokens": 7231,
        "total_tokens": 9079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5771,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1848,
        "output_tokens": 7231,
        "total_tokens": 9079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5771,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the schematic\n\n| Device | Type | Source | Gate | Drain | Role |\n|---|---|---|---|---|---|\n| **M₂** | PMOS (arrow into the channel at the top terminal ⇒ source on top) | V_DD (ac ground) | V_in | V_out | **Common‑source amplifier** |\n| **M₁** | PMOS | V_out | 0 V | 0 V | **Diode‑connected load** (gate tied to drain) |\n\nSo the circuit is a **PMOS common‑source stage loaded by a diode‑connected PMOS**. The bias current flows\n\n$$V_{DD}\\;\\xrightarrow{\\;M_2\\;}\\;V_{out}\\;\\xrightarrow{\\;M_1\\;}\\;\\text{GND}$$\n\nNote that M₁ is *not* \"off\" even though its gate is grounded: for a PMOS, grounding the gate while the source sits at V_out > |V_TH| gives V_SG1 = V_out > |V_TH1| → it conducts, and since V_SD1 = V_SG1 it is **always in saturation**.\n\n## 2. Bias (large‑signal) analysis\n\nWith both devices saturated and the square law (λ = 0):\n\n$$I_D=\\tfrac12\\mu_pC_{ox}\\Big(\\frac{W}{L}\\Big)_2\\big(V_{DD}-V_{in}-|V_{TH}|\\big)^2\n=\\tfrac12\\mu_pC_{ox}\\Big(\\frac{W}{L}\\Big)_1\\big(V_{out}-|V_{TH}|\\big)^2$$\n\nTaking square roots:\n\n$$\\boxed{\\,V_{out}=|V_{TH}|+\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\,\\big(V_{DD}-V_{in}-|V_{TH}|\\big)\\,}$$\n\nThe transfer characteristic is a **straight line** (ideally perfectly linear!) whose slope is the voltage gain.\n\n**Validity / swing limits**\n\n* M₂ on: $V_{in}<V_{DD}-|V_{TH2}|$ (otherwise I_D = 0 and V_out collapses to ≈ |V_TH1|, *not* to 0).\n* M₂ saturated: $V_{out}<V_{in}+|V_{TH2}|$, i.e.\n$$|V_{TH}|\\le V_{out}\\le |V_{TH}|+\\frac{\\sqrt{K}}{1+\\sqrt{K}}\\,(V_{DD}-|V_{TH}|),\\qquad K\\equiv\\frac{(W/L)_2}{(W/L)_1}$$\n\nThe diode load therefore wastes at least one |V_TH| of headroom at the bottom of the swing.\n\n## 3. Small‑signal analysis\n\nM₂'s source is at ac ground, so $v_{gs2}=v_{in}$. Looking **into the source of M₁** (gate and drain grounded):\n\n$$R_1=\\frac{1}{g_{m1}+g_{mb1}+r_{o1}^{-1}}\\;\\approx\\;\\frac{1}{g_{m1}+g_{mb1}}$$\n\nHence\n\n$$\\boxed{A_v=-g_{m2}\\left(\\frac{1}{g_{m1}+g_{mb1}}\\;\\Big\\|\\;r_{o1}\\;\\Big\\|\\;r_{o2}\\right)\\;\\simeq\\;-\\frac{g_{m2}}{g_{m1}+g_{mb1}}}$$\n\nSince both devices carry the same I_D and are the same type, $g_m=\\sqrt{2\\mu_pC_{ox}(W/L)I_D}$ gives\n\n$$A_v\\simeq-\\frac{1}{1+\\eta}\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\;=\\;-\\frac{1}{1+\\eta}\\,\\frac{|V_{GS1}-V_{TH}|}{|V_{GS2}-V_{TH}|},\\qquad \\eta=\\frac{g_{mb1}}{g_{m1}}$$\n\n(If each PMOS sits in its own n‑well tied to its source, η = 0 and $A_v=-\\sqrt{(W/L)_2/(W/L)_1}$ — the same slope obtained from the large‑signal equation, as it must be.)\n\n**Impedances**\n\n* $R_{in}=\\infty$ (gate of M₂; only C_GS + Miller C_GD at high frequency)\n* $R_{out}=r_{o1}\\|r_{o2}\\|\\dfrac{1}{g_{m1}+g_{mb1}}\\approx\\dfrac{1}{g_{m1}+g_{mb1}}$ → **low** output impedance, so the stage drives resistive loads well and has a high output pole.\n\n## 4. Interpretation\n\n* **Gain is set by a ratio of dimensions**, not by I_D, μ_pC_ox, or temperature → very reproducible (\"ratioed\" gain) and highly **linear**, because g_m₂ and g_m₁ track each other as the signal swings.\n* **Gain is small**: a gain of 10 needs (W/L)₂/(W/L)₁ = 100, which costs area, input capacitance and headroom. Body effect further degrades it by 1/(1+η) ≈ 0.8.\n* Good choice where linearity, bandwidth and predictability matter (e.g. broadband/driver stages); a current‑source or cascode load is used instead when high gain is required.\n\n**Numerical example:** (W/L)₂ = 40/0.5, (W/L)₁ = 10/0.5, η = 0.2 ⇒ |A_v| ≈ √4/1.2 ≈ **1.7**… i.e. ≈ 2 without body effect — illustrating how modest the gain of this ratioed stage is.",
        "format": "markdown",
        "sha256": "9b39bbee8858a322b0cab289e396c562608250276ceaa3d6db8d2a58d4d2a49b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, M1 as the diode-connected PMOS load, and gives the gm/gm gain. Minor issues in auxiliary details do not change the essential analysis.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1848,
        "output_tokens": 9008,
        "total_tokens": 10856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7026,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1848,
        "output_tokens": 9008,
        "total_tokens": 10856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7026,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\nBoth devices are **PMOS** transistors (arrow on the source pointing into the device):\n\n| Device | Source | Gate | Drain | Role |\n|---|---|---|---|---|\n| **M₂** | V_DD (ac ground) | V_in | V_out | **Common‑source amplifier** |\n| **M₁** | V_out | ground | ground | **Diode‑connected load** (gate = drain = 0) |\n\nSo this is a **PMOS common‑source stage with a diode‑connected PMOS load**. The bias current flows VDD → source‑to‑drain of M₂ → output node → source‑to‑drain of M₁ → ground, so both transistors carry the same current, $I_{D1}=I_{D2}=I_D$.\n\n## 2. Bias / large–signal behaviour\n\nM₂ is saturated if $|V_{GS2}| = V_{DD}-V_{in} > |V_{TH}|$ and $V_{out} \\le V_{in}+|V_{TH}|$.\nM₁, being diode‑connected, is automatically saturated as long as $V_{out} > |V_{TH}|$ (its $|V_{GS1}| = V_{out}$).\n\nEquating the saturation currents (neglecting channel‑length modulation):\n\n$$\\tfrac12\\mu_pC_{ox}\\Big(\\frac{W}{L}\\Big)_2\\big(V_{DD}-V_{in}-|V_{TH}|\\big)^2=\\tfrac12\\mu_pC_{ox}\\Big(\\frac{W}{L}\\Big)_1\\big(V_{out}-|V_{TH}|\\big)^2$$\n\n$$\\boxed{V_{out}=|V_{TH}|+\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\;\\big(V_{DD}-V_{in}-|V_{TH}|\\big)}$$\n\nThe characteristic is a **straight line** – i.e. the stage is quite linear – with slope\n\n$$\\frac{dV_{out}}{dV_{in}}=-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n## 3. Small‑signal analysis\n\nReplace V_DD by ac ground. For M₁ the gate and drain are both grounded, so looking into its **source** we simply see a resistance $\\;(1/g_{m1})\\|r_{O1}$.\n\nKCL at the output node ($v_{gs2}=v_{in}$, $v_{gs1}=-v_{out}$):\n\n$$g_{m2}v_{in}+\\frac{v_{out}}{r_{O2}}+g_{m1}v_{out}+\\frac{v_{out}}{r_{O1}}=0$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m2}\\left(\\frac{1}{g_{m1}}\\;\\Big\\|\\;r_{O1}\\;\\Big\\|\\;r_{O2}\\right)}$$\n\nSince $1/g_{m1}\\ll r_{O1},r_{O2}$:\n\n$$A_v\\simeq-\\frac{g_{m2}}{g_{m1}}=-\\frac{\\sqrt{2\\mu_pC_{ox}(W/L)_2 I_D}}{\\sqrt{2\\mu_pC_{ox}(W/L)_1 I_D}}=-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\nin agreement with the slope found above.\n\n*(If the n‑wells are tied to V_DD rather than to the sources, M₁ suffers body effect and $g_{m1}\\to g_{m1}+g_{mb1}$, giving $A_v\\approx-g_{m2}/(g_{m1}+g_{mb1})$.)*\n\n## 4. Impedances\n\n* $R_{in}=\\infty$ (gate of M₂).\n* $R_{out}= \\dfrac{1}{g_{m1}}\\Big\\|r_{O1}\\Big\\|r_{O2}\\approx \\dfrac{1}{g_{m1}}$ (low output resistance – good drive capability).\n\n## 5. Remarks\n\n* The gain depends only on the **ratio of device dimensions**, not on µ, C_ox, I_D or temperature ⇒ very reproducible and linear, but\n* the gain is **small** (doubling it requires a 4× increase in the W/L ratio), and\n* the output swing is limited: V_out can never drop below $|V_{TH}|$ (M₁ turns off) and must stay below $V_{in}+|V_{TH}|$ to keep M₂ saturated.",
        "format": "markdown",
        "sha256": "9f43c7b9acdc3192499c778c25c65d475bda9f5e889853130e4713cf51424efa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, M1 as a diode-connected PMOS load, and derives the gm/gm gain Av ≈ −gm2/gm1. The additional analysis does not replace or contradict the essential topology and gain interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1848,
        "output_tokens": 5225,
        "total_tokens": 7073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3671,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1848,
        "output_tokens": 5225,
        "total_tokens": 7073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3671,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Small‑Signal Picture\n\nBoth $V_{b1}$ and $V_{b2}$ are **dc bias voltages**, so in the small‑signal model both gates are at ac ground, and $V_{DD}$ is also an ac ground.\n\n**Identify the roles of the two transistors**\n\n* $M_2$: source at $V_{DD}$ (ac ground), gate at ac ground, drain at $X$ → it carries no signal of its own; it simply appears as a resistor $r_{O2}$ from node $X$ to ground.\n* $M_1$: source at $X$, gate at ac ground, drain = output node → it is the **cascode (common‑gate) device**, degenerated by $r_{O2}$.\n\nSo the problem reduces to: *find the resistance looking into the drain of $M_1$ with a source degeneration resistance $R_S = r_{O2}$.*\n\n## Computing $R_{out}$\n\nApply a test current $I_X$ into the output node. It flows through $M_1$ to node $X$ and then through $r_{O2}$ to ac ground:\n\n$$V_X = I_X r_{O2}\\qquad \\Rightarrow \\qquad v_{GS1} = 0 - V_X = -I_X r_{O2}$$\n\nWriting KVL through $M_1$ (drain current source $g_{m1}v_{GS1}$ in parallel with $r_{O1}$):\n\n$$V_{test} = \\big(I_X - g_{m1}v_{GS1}\\big) r_{O1} + I_X r_{O2} = I_X r_{O1}\\big(1+g_{m1}r_{O2}\\big) + I_X r_{O2}$$\n\n$$\\boxed{R_{out} = \\big(1 + g_{m1} r_{O1}\\big) r_{O2} + r_{O1} \\;\\approx\\; g_{m1} r_{O1} r_{O2}}$$\n\n(If the body of $M_1$ were not tied to its own n‑well/source, the result would be $R_{out}=\\left[1+(g_{m1}+g_{mb1})r_{O1}\\right]r_{O2}+r_{O1}$; in an n‑well process each PMOS body can be tied to its source, so body effect vanishes.)\n\n## Interpretation\n\nThe cascode device $M_1$ **boosts** the output resistance of the current source $M_2$ by roughly its own intrinsic gain $g_{m1}r_{O1}$ — this is exactly why cascoding is used to build high‑quality current sources.",
        "format": "markdown",
        "sha256": "e84212c14efed92da07abdd05f080babdd10f0780e6b106f3229b25717f74950"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate cascode and gives the corresponding output-resistance expression and gm1 ro1 ro2 approximation. Omitting body effect is allowed by the full-credit rule.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2825,
        "output_tokens": 2180,
        "total_tokens": 5005,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1343,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2825,
        "output_tokens": 2180,
        "total_tokens": 5005,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1343,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Problem\n\nWith $V_{b1}$ and $V_{b2}$ constant (ac grounds) and $V_{DD}$ an ac ground, the circuit reduces to:\n\n- **M₂** is a diode‑less device with its source at ac ground → it simply presents its output resistance $r_{O2}$ at node X.\n- **M₁** therefore sees a **source‑degeneration resistance** $R_S = r_{O2}$, and we look into its **drain**.\n\n## Resistance Looking Into a Degenerated Drain\n\nApply a test source $v_X$ at the output, with current $i_X$ flowing in. The current flows through $r_{O2}$, so\n\n$$v_P = i_X r_{O2} \\quad (\\text{voltage at node X})$$\n\nSince the gate is at ac ground, $v_{gs1} = -v_P = -i_X r_{O2}$. Writing KCL at the output node through $r_{O1}$:\n\n$$i_X = \\frac{v_X - v_P}{r_{O1}} + g_{m1}v_{gs1} = \\frac{v_X - i_X r_{O2}}{r_{O1}} - g_{m1} i_X r_{O2}$$\n\n$$i_X r_{O1} = v_X - i_X r_{O2} - g_{m1} r_{O1} r_{O2} i_X$$\n\n## Result\n\n$$\\boxed{R_{out} = \\left(1 + g_{m1} r_{O1}\\right) r_{O2} + r_{O1} \\;\\approx\\; g_{m1} r_{O1} r_{O2}}$$\n\n**Notes:**\n\n- Body effect is omitted because each PMOS can sit in its own n‑well with bulk tied to source ($V_{SB}=0$). If instead the bulks are tied to $V_{DD}$, replace $g_{m1} \\to g_{m1}+g_{mb1}$:\n$$R_{out} = \\big[1 + (g_{m1}+g_{mb1})r_{O1}\\big]r_{O2} + r_{O1}$$\n\n- The cascode **boosts** the output resistance of the current source by roughly the intrinsic gain $g_{m1}r_{O1}$ of M₁ compared with a single transistor ($r_{O2}$ alone) — the key reason cascoding is used to build high‑quality current sources.",
        "format": "markdown",
        "sha256": "cc990a04b6be145c32c9b859f7d2986dfa55371480203da8d7dbad12d5adc05a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the PMOS cascode device and gives Rout = ro1 + ro2 + gm1·ro1·ro2 (with the optional body-effect term noted), matching the expected result.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2825,
        "output_tokens": 1279,
        "total_tokens": 4104,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 496,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2825,
        "output_tokens": 1279,
        "total_tokens": 4104,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 496,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Small‑Signal Problem\n\nBoth gates are tied to **dc bias voltages** ($V_{b1}, V_{b2}$), so they are small‑signal grounds. The source of $M_2$ is tied to $V_{DD}$, also an ac ground.\n\n**Transistor $M_2$:** Since $v_{gs2} = 0$ (gate and source both ac grounds), $M_2$ contributes no controlled current — it collapses to just its output resistance $r_{O2}$ tied from node $X$ to ac ground.\n\n**Transistor $M_1$:** It now sees a degeneration resistance $R_S = r_{O2}$ at its source, with its gate at ac ground.\n\n## Resistance Looking into the Drain with Degeneration\n\nApply a test source $v_X$ (current $i_X$) at the output. All of $i_X$ must flow through $r_{O2}$, so\n\n$$v_X^{(\\text{node }X)} = i_X\\,r_{O2}$$\n\nSince the gate (and bulk, tied to $V_{DD}$) are ac grounds:\n\n$$v_{gs1} = -i_X r_{O2}, \\qquad v_{bs1} = -i_X r_{O2}$$\n\nKCL at the drain of $M_1$:\n\n$$i_X = \\frac{v_X - i_X r_{O2}}{r_{O1}} - (g_{m1}+g_{mb1})\\,i_X r_{O2}$$\n\nSolving:\n\n$$v_X = i_X\\big[r_{O1} + r_{O2} + (g_{m1}+g_{mb1})r_{O1}r_{O2}\\big]$$\n\n## Result\n\n$$\\boxed{R_{out} = \\big[1 + (g_{m1}+g_{mb1})r_{O1}\\big]r_{O2} + r_{O1} \\;\\approx\\; (g_{m1}+g_{mb1})\\,r_{O1}r_{O2}}$$\n\n(If each PMOS sits in its own n‑well tied to its source, $g_{mb1}=0$ and $R_{out}\\approx g_{m1}r_{O1}r_{O2}$.)\n\n**Interpretation:** The cascode device $M_1$ \"boosts\" the resistance of the current source $M_2$ by a factor of roughly its intrinsic gain $g_{m1}r_{O1}$ — this is why cascoding gives a much closer approximation to an ideal current source.",
        "format": "markdown",
        "sha256": "4a6bb6a52104be68acfcc7767920694648fa4a8a9fbdd491016a9f6677198929"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies M1 as the cascode device and gives the correct full output-resistance expression. The minor imprecision in the derivation does not change the result.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2825,
        "output_tokens": 1736,
        "total_tokens": 4561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 923,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2825,
        "output_tokens": 1736,
        "total_tokens": 4561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 923,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Condition\n\nThis is a PMOS cascode current source: M₂ is the current‑source device (source tied to V_DD), and M₁ is the cascode device whose source sits at node X.\n\n**Saturation condition for a PMOS:**\n\n$$|V_{DS2}| \\ge |V_{GS2}| - |V_{TH2}|$$\n\nFor M₂:\n\n$$V_{SG2}=V_{DD}-V_{b2}, \\qquad V_{SD2}=V_{DD}-V_X$$\n\nSo\n\n$$V_{DD}-V_X \\;\\ge\\; (V_{DD}-V_{b2})-|V_{TH2}|$$\n\n$$\\boxed{V_X \\le V_{b2}+|V_{TH2}|}$$\n\ni.e. node X must stay **at least one overdrive below V_DD**:\n\n$$V_{DD}-V_X \\ \\ge\\ |V_{OV2}| = V_{DD}-V_{b2}-|V_{TH2}|$$\n\n## Translating This Into a Choice of V_b1\n\nThe potential at X is *not* free — it is established by M₁, whose source is X:\n\n$$V_X = V_{b1} + V_{SG1} = V_{b1} + |V_{TH1}| + |V_{OV1}|$$\n\nSubstituting into the condition above:\n\n$$V_{b1} + |V_{TH1}| + |V_{OV1}| \\;\\le\\; V_{b2} + |V_{TH2}|$$\n\n$$\\Rightarrow\\quad V_{b1} \\;\\le\\; V_{b2} + |V_{TH2}| - |V_{TH1}| - |V_{OV1}|$$\n\nIf the two thresholds are equal (no body effect), this simplifies to\n\n$$V_{b1} \\;\\le\\; V_{b2} - |V_{OV1}|, \\qquad |V_{OV1}|=\\sqrt{\\frac{2I_D}{\\mu_p C_{ox}(W/L)_1}}$$\n\n**In words:** the cascode gate bias V_b1 must be lower than V_b2 by at least one overdrive voltage of M₁. Then M₁ pulls node X down far enough that M₂ still sees |V_SD2| ≥ |V_OV2|.\n\n## Practical Notes\n\n- Make M₁ wide (small |V_OV1|) so that only a small amount of V_b1 margin — and a small amount of output headroom — is sacrificed.\n- If M₁'s bulk is tied to V_DD, body effect raises |V_TH1| and pushes V_X up, so include that in the inequality (or tie the n‑well of M₁ to its own source).\n- M₁ itself remains saturated only while $V_{out} \\le V_{b1}+|V_{TH1}|$; combining both devices, the cascode needs a total headroom of $|V_{OV1}|+|V_{OV2}|$, i.e.\n\n$$V_{out} \\le V_{DD} - |V_{OV1}| - |V_{OV2}|$$\n\nfor $R_{out} \\approx g_{m1}r_{O1}r_{O2}$ to hold.",
        "format": "markdown",
        "sha256": "75c6d7c6fcbd949727c8314f5c440b76ab8e2c3ce588361069fc00876dd0846e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and uses V_X = V_b1 + |V_GS1| to derive the required condition on V_b1. The extra notes do not undermine the essential answer.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2789,
        "output_tokens": 2641,
        "total_tokens": 5430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1605,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2789,
        "output_tokens": 2641,
        "total_tokens": 5430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1605,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the problem\n\nThis is a **PMOS cascode current source**: M₂ is the \"bottom\" (main) device with its source at V_DD, and M₁ is the cascode device whose source sits at node X and whose drain drives the output (Rout ≈ g_m1 r_O1 r_O2).\n\nThe key point is that **V_X is not free** — it is established by M₁ and the bias V_b1 — so saturation of M₂ becomes a constraint relating V_b2 to V_b1.\n\n## Condition at M₂\n\nFor a PMOS, saturation requires\n\n$$V_{SD2} \\ge V_{SG2} - |V_{TH2}| \\;=\\; |V_{ov2}|$$\n\nWith the source at V_DD and the drain at X:\n\n$$V_{DD} - V_X \\;\\ge\\; (V_{DD} - V_{b2}) - |V_{TH2}|$$\n\n$$\\boxed{V_X \\le V_{b2} + |V_{TH2}|}$$\n\ni.e. node X must not rise more than one threshold above the gate bias of M₂.\n\n## What sets V_X\n\nSince M₁ carries the same current and its source is tied to X:\n\n$$V_X = V_{b1} + V_{SG1} = V_{b1} + |V_{TH1}| + |V_{ov1}|$$\n\n## Combining\n\n$$V_{b1} + |V_{TH1}| + |V_{ov1}| \\;\\le\\; V_{b2} + |V_{TH2}|$$\n\nand, for equal thresholds,\n\n$$\\boxed{V_{b2} \\ge V_{b1} + |V_{ov1}|}$$\n\nSo **V_b2 must be chosen at least one overdrive (of M₁) *above* V_b1** (in practice with some margin for process/temperature variation, which is why V_b1 and V_b2 are usually derived from a matched/replica bias branch rather than from independent sources).\n\n## Consequences\n\n* M₂ must of course also be on: $V_{b2} \\le V_{DD} - |V_{TH2}|$, and for a given current $V_{DD}-V_{b2} = |V_{TH2}| + |V_{ov2}|$.\n* Substituting, the bias requirement becomes $V_{DD} - V_{b1} \\ge |V_{TH}| + |V_{ov1}| + |V_{ov2}|$.\n* Keeping M₁ in saturation as well requires $V_{out} \\le V_X - |V_{ov1}|$, so the output can swing only to within\n\n$$V_{DD} - V_{out,max} = |V_{ov1}| + |V_{ov2}|$$\n\ni.e. the cascode's higher output impedance costs roughly **two overdrive voltages of headroom** instead of one.",
        "format": "markdown",
        "sha256": "59807d50aa3f3b07fee4b0939c02ad8ccc34dc038d9178df4e34de51c24b3868"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, and uses V_X = V_b1 + |V_GS1| to derive the equivalent bias requirement V_b2 − V_b1 ≥ |V_ov1| for equal thresholds.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2789,
        "output_tokens": 2778,
        "total_tokens": 5567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1871,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2789,
        "output_tokens": 2778,
        "total_tokens": 5567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1871,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the problem\n\nM₂ is a PMOS whose\n\n- source = V_DD\n- gate = V_b2\n- drain = node X\n\nSo its terminal voltages are\n\n$$V_{SG2}=V_{DD}-V_{b2},\\qquad V_{SD2}=V_{DD}-V_X$$\n\n**Saturation (PMOS):**\n\n$$V_{SD2}\\;\\ge\\;V_{SG2}-|V_{TH2}|$$\n\n$$V_{DD}-V_X \\;\\ge\\; (V_{DD}-V_{b2})-|V_{TH2}|$$\n\n$$\\boxed{V_X \\;\\le\\; V_{b2}+|V_{TH2}|}$$\n\ni.e. equivalently $V_X \\le V_{DD}-|V_{OD2}|$ — node X must stay at least one overdrive below V_DD.\n\n## Who controls V_X ?\n\nNode X is the **source** of the cascode device M₁, so its voltage is pinned by V_b1:\n\n$$V_X = V_{b1}+V_{SG1}=V_{b1}+|V_{TH1}|+|V_{OD1}|$$\n\nSubstituting into the condition above:\n\n$$V_{b1}+|V_{TH1}|+|V_{OD1}| \\;\\le\\; V_{b2}+|V_{TH2}|$$\n\n$$V_{b1}\\;\\le\\; V_{b2}+|V_{TH2}|-|V_{TH1}|-|V_{OD1}|\n\\;\\;\\overset{|V_{TH1}|\\approx|V_{TH2}|}{\\approx}\\;\\; V_{b2}-|V_{OD1}|$$\n\n**So: V_b1 must be chosen low enough** — roughly one overdrive (of M₁) *below* V_b2 — so that the source of M₁ (node X) is not pulled too close to V_DD.\n\n## Remarks\n\n- If the bulk of M₁ is tied to V_DD, body effect raises |V_TH1|, which raises V_X for a given V_b1; V_b1 must then be made correspondingly lower.\n- M₁ itself stays saturated as long as $V_{out}\\le V_{b1}+|V_{TH1}|$, which gives the familiar headroom limit $V_{out,max}=V_{DD}-|V_{OD1}|-|V_{OD2}|$ when both devices are at the edge.\n- With both in saturation, $R_{out}\\approx g_{m1}r_{O1}r_{O2}$ (plus the $r_{O1}+r_{O2}$ term), which is the whole point of the cascode.",
        "format": "markdown",
        "sha256": "4fe5f7b5571fa33e8d305e3f38109a7a7a710bd9ff8f4cedec59c95296651ba6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives M2’s PMOS saturation condition, relates VX to Vb1 through M1, and derives the corresponding Vb1 limit. The additional remarks do not undermine the essential answer.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2789,
        "output_tokens": 2376,
        "total_tokens": 5165,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1508,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2789,
        "output_tokens": 2376,
        "total_tokens": 5165,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1508,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n* **M₁** – NMOS, source grounded, gate driven by *v*in → **common‑source (transconductor)**\n* **M₂** – NMOS, gate tied to the DC bias *V*b1 (ac ground), source at node **X**, drain at *v*out → **common‑gate (cascode device)**\n* **I₁** – current‑source load (ideal → infinite small‑signal resistance)\n\nThis is the classic **cascode (telescopic) amplifier**: M₁ converts *v*in to a current, M₂ routes that current to the output while *shielding* node X from the output, and the very large resistance at the output node converts the current back to a voltage.\n\nAssume both bulks are at ground: M₁ has *V*SB = 0 (no body effect), M₂ has *V*SB = *V*X ≠ 0, so **g**mb2 must be kept.\n\n---\n\n## 2. Bias point and headroom\n\nSince the branch is a series string, \n\n$$I_{D1}=I_{D2}=I_1$$\n\n$$V_{GS1}=V_{TH1}+V_{ov1},\\qquad V_{ov1,2}=\\sqrt{\\frac{2I_1}{\\mu_nC_{ox}(W/L)_{1,2}}}$$\n\n$$V_X=V_{b1}-V_{GS2}=V_{b1}-V_{TH2}(V_X)-V_{ov2}$$\n\nSaturation conditions:\n\n| device | condition |\n|---|---|\n| M₁ | $V_X\\ge V_{in}-V_{TH1}=V_{ov1}$ → $V_{b1}\\ge V_{ov1}+V_{GS2}$ |\n| M₂ | $V_{out}\\ge V_{b1}-V_{TH2}$ → $V_{out,min}=V_{ov1}+V_{ov2}$ |\n| I₁ | $V_{out}\\le V_{DD}-|V_{ov,I1}|$ |\n\nSo the price of cascoding is **one extra overdrive of output swing** plus the need for the extra bias *V*b1. (With a truly ideal I₁ the DC output level is undefined — in practice the finite *r*o of a PMOS source, or common‑mode feedback, fixes it.)\n\n---\n\n## 3. Small‑signal analysis\n\n### (a) Quick route – an ideal current source carries **no** ac current\n\nIf I₁ is ideal, the ac current in the whole branch is zero ⇒ *i*d1 = 0:\n\n$$g_{m1}v_{in}+\\frac{v_X}{r_{O1}}=0\\;\\Longrightarrow\\; \\boxed{v_X=-g_{m1}r_{O1}v_{in}}$$\n\nWith zero current in M₂:\n\n$$-(g_{m2}+g_{mb2})v_X+\\frac{v_{out}-v_X}{r_{O2}}=0\\;\\Longrightarrow\\; v_{out}=\\big[1+(g_{m2}+g_{mb2})r_{O2}\\big]v_X$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m1}r_{O1}\\big[1+(g_{m2}+g_{mb2})r_{O2}\\big]\\simeq-g_{m1}r_{O1}(g_{m2}+g_{mb2})r_{O2}}$$\n\ni.e. **the product of two intrinsic gains** — the whole point of the cascode.\n\n### (b) General route – *G*m × *R*out\n\nOutput resistance (M₂ degenerated by *r*O1):\n\n$$R_{out}=r_{O2}\\big[1+(g_{m2}+g_{mb2})r_{O1}\\big]+r_{O1}\\simeq (g_{m2}+g_{mb2})r_{O1}r_{O2}$$\n\nShort‑circuit transconductance:\n\n$$G_m=g_{m1}\\frac{(g_{m2}+g_{mb2})+1/r_{O2}}{(g_{m2}+g_{mb2})+1/r_{O2}+1/r_{O1}}\\approx g_{m1}$$\n\n$$A_v=-G_mR_{out}= -g_{m1}r_{O1}\\big[1+(g_{m2}+g_{mb2})r_{O2}\\big]\\quad\\text{(same result)}$$\n\nIf the source has a finite resistance *R*L (real PMOS, *r*O3):\n\n$$A_v\\simeq -g_{m1}\\,(R_{out}\\|R_L)$$\n\n— the gain is then **limited by the load**, which is why a cascoded PMOS load is used in practice.\n\n### (c) Impedances\n\n* Input: $Z_{in}=\\infty$ at DC (gate); capacitive at high frequency.\n* Looking **up** into the source of M₂ with load *R*L:\n$$R_X=\\frac{R_L+r_{O2}}{1+(g_{m2}+g_{mb2})r_{O2}}\\approx\\frac{1}{g_{m2}+g_{mb2}}+\\frac{R_L}{(g_{m2}+g_{mb2})r_{O2}}$$\nWith an ideal I₁ (*R*L→∞) this is huge, hence the large gain *v*X/*v*in = –*g*m1*r*O1.\n* **Shielding:** *v*X ≈ *v*out/[(gm2+gmb2)ro2], so M₁'s *V*DS is almost constant ⇒ channel‑length modulation of M₁ is suppressed and reverse isolation (output→input) is excellent.\n\n---\n\n## 4. Frequency response\n\n$$C_X=C_{DB1}+C_{GD1}+C_{GS2}+C_{SB2},\\qquad C_{out}=C_{DB2}+C_{GD2}+C_L(+C_{I1})$$\n\n* Dominant (output) pole: $\\omega_{p,out}=\\dfrac{1}{R_{out}C_{out}}$ — very low because *R*out is huge.\n* Non‑dominant pole at X: $\\omega_{p,X}\\approx\\dfrac{g_{m2}+g_{mb2}}{C_X}$ (resistance there is ≈1/(gm2+gmb2) once the output is capacitively loaded).\n* Gain–bandwidth ≈ *g*m1/*C*out — **the cascode buys gain, not GBW**.\n* ⚠️ Miller caution: the classic \"cascode kills the Miller effect on *C*GD1\" is only true when the *load impedance is small* (then *v*X/*v*in ≈ –*g*m1/(gm2+gmb2) ≈ –1). Here, at low frequencies *v*X/*v*in = –*g*m1*r*O1 is large, so *C*GD1 is strongly Miller‑multiplied at low frequency (it is de‑multiplied only above the output pole, where *C*L lowers *R*X).\n\n---\n\n## 5. Numerical illustration\n\nTake *g*m1 = *g*m2 = 1 mS, *r*O1 = *r*O2 = 100 kΩ, *g*mb2 = 0.2*g*m2, *C*out = 100 fF:\n\n* $R_{out}=0.2\\,\\text{M}\\Omega+1.2\\text{mS}\\times10^{10}=12.2\\ \\text{M}\\Omega$\n* $A_v=-(1\\text{mS})(100\\text{k})(1+120)=-1.21\\times10^{4}\\;(\\approx 81.7\\ \\text{dB})$ vs. **–100 (40 dB)** for a plain CS stage\n* $f_{p,out}=1/(2\\pi\\cdot12.2\\text{M}\\cdot100\\text{f})\\approx130\\ \\text{kHz}$, GBW ≈ 1.6 GHz\n\n---\n\n## 6. Summary\n\n| Feature | Result |\n|---|---|\n| Gain | $A_v=-g_{m1}r_{O1}[1+(g_{m2}+g_{mb2})r_{O2}]\\approx -(g_mr_O)^2$ |\n| Output resistance | $R_{out}\\approx (g_{m2}+g_{mb2})r_{O1}r_{O2}$ |\n| Short‑circuit *G*m | ≈ *g*m1 (unchanged by cascoding) |\n| Gain at X | –*g*m1*r*O1 (ideal load) |\n| Output swing | reduced to $V_{DD}-|V_{ov,I1}|-(V_{ov1}+V_{ov2})$ |\n| Extras needed | bias *V*b1; body effect of M₂ actually *helps* the gain |\n| Weak points | gain collapses to $-g_{m1}(R_{out}\\|R_L)$ if the current source is not cascoded; low‑frequency Miller effect not removed; added pole at X |",
        "format": "markdown",
        "sha256": "4be0a49d1d5f7176064a80a3145735cad93ea667d043959729e728b657a43681"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression specified by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 9196,
        "total_tokens": 10648,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6224,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 9196,
        "total_tokens": 10648,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6224,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n* **M₁** – NMOS with signal on the gate, source at ground → **common‑source (CS) transconductor**\n* **M₂** – NMOS with its gate tied to a dc bias V_b1 (ac ground), source at node X → **common‑gate (CG) current buffer (\"cascode device\")**\n* **I₁** – ideal current source acting as the load (ac open circuit)\n\nSo this is the classic **telescopic cascode amplifier**: a CS stage whose drain current is passed to the output by a CG stage. M₁ converts v_in → i_d, M₂ passes that current to v_out while isolating the drain of M₁ from the output swing.\n\n---\n\n## 2. DC operating point / headroom\n\n| Quantity | Condition |\n|---|---|\n| Branch current | I_D1 = I_D2 = **I₁** (the dc level of V_in must be such that M₁ carries exactly I₁) |\n| Node X | V_X = V_b1 − V_GS2 |\n| M₁ in saturation | V_X ≥ V_GS1 − V_TH1 = V_ov1 → V_b1 ≥ V_ov1 + V_GS2 |\n| M₂ in saturation | V_out ≥ V_X + V_ov2 |\n| **Minimum output level** | **V_out,min = V_ov1 + V_ov2** (plus whatever I₁ needs below V_DD) |\n\n→ The price of the cascode is **one extra V_ov of output swing** and the need for an extra bias voltage V_b1.\n\nNote also that because both the \"pull‑up\" (I₁) and \"pull‑down\" (M₁) are current sources, the output dc level is set by a balance of two currents at an extremely high‑impedance node; in practice this stage must be used inside a feedback loop (or with CMFB), otherwise any mismatch drives V_out to a rail.\n\n---\n\n## 3. Small‑signal analysis\n\nUse g_m1, r_o1 for M₁ (source grounded → no body effect) and g_m2, g_mb2, r_o2 for M₂ (source at X → body effect active). I₁ is an ac open circuit.\n\n**Output resistance** (v_in ac‑grounded, look into the drain of M₂ which is degenerated by r_o1):\n\n$$\\boxed{R_{out}=r_{o1}+r_{o2}+(g_{m2}+g_{mb2})r_{o1}r_{o2}\\;\\simeq\\;(g_{m2}+g_{mb2})\\,r_{o2}\\,r_{o1}}$$\n\ni.e. the cascode **boosts r_o1 by the intrinsic gain of M₂**.\n\n**Voltage gain.** With an ideal current source load no ac current can flow in the branch, so i_d1 = i_d2 = 0:\n\n* KCL at X:  g_{m1}v_{in} + v_X/r_{o1} = 0 → v_X = −g_{m1}r_{o1}v_{in}\n* M₂:  −(g_{m2}+g_{mb2})v_X + (v_{out}−v_X)/r_{o2} = 0 → v_{out} = v_X[1+(g_{m2}+g_{mb2})r_{o2}]\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m1}r_{o1}\\big[1+(g_{m2}+g_{mb2})r_{o2}\\big]\\;\\approx\\;-g_{m1}r_{o1}(g_{m2}+g_{mb2})r_{o2}}$$\n\nEquivalently **A_v ≈ −G_m R_out with G_m ≈ g_m1** — the gain is roughly the *product of two intrinsic gains*, (g_mr_o)², instead of one.\n\n**Impedances at the internal node X**\n\n* Looking **down** into M₁'s drain: r_o1\n* Looking **up** into M₂'s source: R_X = (r_o2 + R_L)/[1+(g_m2+g_mb2)r_o2]\n – with the ideal source (R_L = ∞): R_X → ∞ (hence the large swing v_X = −g_m1r_o1v_in)\n – with a capacitive/finite load at high frequency: **R_X ≈ 1/(g_m2+g_mb2)** (low impedance)\n\n**Input impedance:** infinite at dc (gate); capacitive at high frequency.\n\n*Numerical example:* g_m1 = g_m2 = 1 mS, g_mb2 = 0.2 mS, r_o1 = r_o2 = 20 kΩ →\nR_out ≈ 1.2 mS·20 k·20 k ≈ 0.5 MΩ, A_v ≈ −1 m·20 k·25 ≈ **−500 (≈54 dB)**, versus −20 (26 dB) for M₁ alone.\n\n---\n\n## 4. Frequency response\n\nWith C_L at the output:\n\n* **Dominant (output) pole:** ω_p1 ≈ 1/[R_out(C_L + C_DB2 + C_GD2)] — very low, because R_out is huge.\n* **Node‑X pole:** ω_pX ≈ (g_m2+g_mb2)/C_X, C_X = C_GS2 + C_SB2 + C_DB1 + C_GD1 — high frequency (non‑dominant).\n* **Gain–bandwidth:** GBW ≈ g_m1/C_L (unchanged by the cascode — the cascode buys gain, not speed).\n* **Miller shielding:** at frequencies of interest the load seen by M₁ is only ≈1/(g_m2+g_mb2), so C_GD1 is multiplied by only ≈ 1+g_m1/(g_m2+g_mb2) ≈ 2 instead of by the full gain. This is the second big benefit of the cascode (good for input capacitance / reverse isolation).\n\n---\n\n## 5. Summary & practical notes\n\n| Parameter | Result |\n|---|---|\n| A_v | −g_m1r_o1[1+(g_m2+g_mb2)r_o2] ≈ −g_m1(g_m2+g_mb2)r_o1r_o2 |\n| G_m | ≈ g_m1 |\n| R_out | r_o1+r_o2+(g_m2+g_mb2)r_o1r_o2 |\n| R_in | ∞ (dc) |\n| V_out,min | V_ov1 + V_ov2 |\n| Dominant pole | 1/(R_outC_L) |\n\n* **Advantages:** very high gain (≈ intrinsic gain squared), high output resistance, reduced Miller effect, good input–output isolation, reduced channel‑length‑modulation/V_DS dependence of M₁.\n* **Limitations:** reduced output swing, extra bias V_b1, body effect of M₂ (helps gain, hurts headroom), and — most importantly — in a real circuit I₁ is a transistor with finite output resistance R_op, so\n $$A_v\\approx -g_{m1}\\big(R_{out,n}\\,\\|\\,R_{op}\\big),$$\n which is why a *cascoded* PMOS current source is normally used to avoid losing the gain you just gained.",
        "format": "markdown",
        "sha256": "5bf9556a49b9fa7fcd8e3b9471ecb63efc6271fce1ca60d1cf34700801337e43"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as the common-source NMOS and M₂ as the common-gate NMOS cascode, and derives the equivalent ideal-load gain expression. Ancillary analysis does not change the essential answer.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 6682,
        "total_tokens": 8134,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4259,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 6682,
        "total_tokens": 8134,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4259,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n* **M₁** – NMOS with source at ground, signal applied to its gate → **common‑source (CS) input device** (transconductor: converts v_in into a drain current).\n* **M₂** – NMOS whose gate is tied to a fixed DC bias V_b1 (ac ground) and whose source sits at node X → **common‑gate (cascode) device** (current buffer).\n* **I₁** – ideal (or high‑impedance) current source acting as the load.\n\nSo this is the classic **telescopic cascode amplifier** (CS stage with a cascode device and a current‑source load). Output is taken at the drain of M₂.\n\n---\n\n## 2. Bias (DC) conditions\n\nSince M₁ and M₂ are in series with I₁:\n\n$$I_{D1}=I_{D2}=I_1$$\n\n$$V_{GS1}=V_{TH1}+\\sqrt{\\frac{2I_1}{\\mu_nC_{ox}(W/L)_1}},\\qquad \nV_X=V_{b1}-V_{GS2}$$\n\nwith\n$$V_{GS2}=V_{TH2}(V_X)+\\sqrt{\\frac{2I_1}{\\mu_nC_{ox}(W/L)_2}}$$\n\n(V_TH2 is raised by the **body effect** because the source of M₂ is at V_X > 0).\n\n**Saturation requirements**\n\n* M₁: $V_X \\ge V_{GS1}-V_{TH1}=V_{OD1}$\n* M₂: $V_{out}\\ge V_{b1}-V_{TH2}$, i.e. $V_{out,\\min}=V_{OD1}+V_{OD2}$ (+ the headroom of I₁)\n\nNote: V_b1 must be chosen as $V_{b1}\\ge V_{OD1}+V_{GS2}$ — too large a V_b1 wastes output swing, too small pushes M₁ into the triode region.\n\n⚠️ Because both branches are current sources at DC, the **output DC level is undefined/extremely sensitive**; in practice I₁ must be made to track I_D1 (or a feedback/CMFB loop is used).\n\n---\n\n## 3. Small‑signal analysis (bodies grounded ⇒ M₂ has body effect)\n\nWrite KCL with v_X and v_out as unknowns:\n\n* M₁ (drain current into node X): $i_1=g_{m1}v_{in}+\\dfrac{v_X}{r_{O1}}$\n* M₂ (drain→source current): $i_2=-(g_{m2}+g_{mb2})v_X+\\dfrac{v_{out}-v_X}{r_{O2}}$\n\n**With an ideal I₁** the ac current into the output node is zero ⇒ $i_2=i_1=0$:\n\n$$\\boxed{\\frac{v_X}{v_{in}}=-g_{m1}r_{O1}},\\qquad \n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m1}r_{O1}\\big[1+(g_{m2}+g_{mb2})r_{O2}\\big]\\;\\approx\\;-g_{m1}(g_{m2}+g_{mb2})r_{O1}r_{O2}}$$\n\n### Output resistance (v_in = 0)\nLooking down into the drain of M₂ (classic cascode result):\n\n$$R_{out}=r_{O2}+r_{O1}+(g_{m2}+g_{mb2})r_{O1}r_{O2}\\;\\approx\\;(g_{m2}+g_{mb2})r_{O2}\\cdot r_{O1}$$\n\ni.e. M₂ **boosts** r_O1 by its own intrinsic gain. With a **real** current source of output resistance r_O3:\n\n$$R_{out}=\\big[(g_{m2}+g_{mb2})r_{O1}r_{O2}\\big]\\;\\|\\;r_{O3},\\qquad A_v\\simeq -g_{m1}R_{out}$$\n\n(the short‑circuit transconductance of the stage is still $G_m\\simeq g_{m1}$).\n\n### Resistance at node X\n$$R_X=\\frac{r_{O2}+R_L}{1+(g_{m2}+g_{mb2})r_{O2}}\\approx\\frac{R_L}{(g_{m2}+g_{mb2})r_{O2}}+\\frac{1}{g_{m2}+g_{mb2}}$$\nWith R_L → ∞ (ideal I₁) R_X → ∞, which is why v_X/v_in = –g_m1 r_O1 above.\n\n### Input resistance\nInfinite at DC (MOS gate); capacitive at high frequency.\n\n---\n\n## 4. Frequency response\n\n| Node | Capacitance | Pole |\n|---|---|---|\n| X | $C_X=C_{DB1}+C_{GD1}+C_{SB2}+C_{GS2}$ | $\\omega_X\\approx\\dfrac{g_{m2}+g_{mb2}}{C_X}$ (non‑dominant, high) |\n| out | $C_{out}=C_{DB2}+C_{GD2}+C_{I_1}+C_L$ | $\\omega_{p,out}=\\dfrac{1}{R_{out}C_{out}}$ (dominant, very low) |\n\n**Key benefit:** at signal frequencies the impedance seen at X is only ≈ 1/(g_m2+g_mb2), so the gain from v_in to X is ≈ –g_m1/(g_m2+g_mb2) ≈ –1. Hence C_GD1 is Miller‑multiplied only by ~2 instead of by the full gain → much wider bandwidth than a plain CS stage of the same gain. M₂ also **shields** M₁ from output swings (reduces the Miller effect and improves output‑resistance/gain).\n\nGain–bandwidth ≈ $g_{m1}/C_{out}$ — unchanged; the cascode buys **gain, not GBW**.\n\n---\n\n## 5. Numerical illustration\n\ng_m1 = g_m2 = 1 mS, r_O1 = r_O2 = 50 kΩ, g_mb = 0.2 g_m, ideal I₁:\n\n* $R_{out}= 50k+50k+(1.2\\,\\text{mS})(50k)(50k)=3.1\\ \\text{M}\\Omega$\n* $A_v=-(1\\,\\text{mS})(50k)\\,[1+60]=-3050\\ \\text{V/V}\\;(\\approx 70\\ \\text{dB})$\n* $v_X/v_{in}=-50$ V/V, minimum output ≈ V_OD1+V_OD2 ≈ 0.4 V above ground.\n\n---\n\n## 6. Summary of pros / cons\n\n**Pros:** very high voltage gain (≈ g_m1·g_m2·r_O1·r_O2), very high output impedance (ideal for current‑source/OTA loads), strongly reduced Miller effect, much better reverse isolation and lower output‑to‑input kickback.\n\n**Cons:** reduced output swing (two V_OD stacked), extra bias voltage V_b1 required, body effect of M₂ (helps R_out but raises V_GS2 and eats headroom), gain is easily lost if the load resistance is not also high, and the DC output level needs definition (feedback/CMFB).",
        "format": "markdown",
        "sha256": "6b3f42e5f1509d97f9f69e8127bd8000f3ec95cd64731af6dd4eb937c4e979c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the correct ideal-load gain. The later node-X and bandwidth claims are inconsistent, but the explicit full-credit rule is satisfied.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 6139,
        "total_tokens": 7591,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3669,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 6139,
        "total_tokens": 7591,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3669,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer: No — it is not a cascode.\n\n### Read the device symbols carefully\n\n* **M₂** – the source arrow is on its **lower** terminal and points *out* of the device → M₂ is an NMOS whose **source is node X** (the middle node) and whose **drain** goes up to *R_D*/*V_out*. Gate = V_b1 (ac ground). ✔ This device is fine as a cascode‑type device.\n* **M₁** – the arrow is on its **upper** terminal and points *into* the device → that terminal is the **source of a PMOS**. So M₁'s **source is also node X**, its **drain is grounded**, and its gate carries V_in.\n\nSo the two transistors have their **sources tied together at X**, and the input device's drain is simply connected to ground.\n\n### Why that disqualifies it\n\nA cascode requires:\n\n> a common‑source input device (source at ac ground) whose **drain** drives the **source** of a common‑gate device, so that the signal current *g_m1v_in* is routed through the cascode transistor to the output.\n\nHere M₁ never produces a signal current into the output branch — its drain is grounded. Hence the essential \"stacked current path with a low‑impedance node at the input device's drain / boosted impedance at the output\" does not exist.\n\n### What the circuit actually is\n\n* **M₁ = source follower** driving node X (loaded by the 1/g_m2 seen looking into M₂'s source)\n* **M₂ = common‑gate stage** sensing v_X and delivering the current to R_D\n\nNeglecting r_O and body effect:\n\n$$\\frac{v_X}{v_{in}}=\\frac{g_{m1}}{g_{m1}+g_{m2}},\\qquad \\frac{v_{out}}{v_X}=+g_{m2}R_D$$\n\n$$\\boxed{A_v=+\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D=\\frac{R_D}{\\frac{1}{g_{m1}}+\\frac{1}{g_{m2}}}}$$\n\ni.e. a **non‑inverting** gain that is *smaller* than a single CS stage's g_mR_D (only ≈ g_mR_D/2 for equal devices) — nothing like a cascode, and with no appreciable boosting of the output resistance (R_out ≈ R_D in parallel with a only mildly degenerated r_O2).\n\n(The bias current does flow properly: V_DD → R_D → M₂ (drain→source) → X → M₁ (source→drain) → ground, so the circuit works — it's just a follower + common‑gate combination.)\n\n### How to make it a cascode\n\nGround M₁'s source and connect its **drain** to M₂'s **source** (both devices NMOS). Then v_out/v_in = −g_m1R_D with a low‑impedance node at M₁'s drain, and with a current‑source load the output resistance becomes ≈ g_m2r_O2r_O1 — the real cascode behaviour.",
        "format": "markdown",
        "sha256": "a396f50719f804e6cbfa9bd1a2b38359ad70e7fe68e3b49ff3c26236633c025f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says the circuit is not a cascode and identifies M1 as a PMOS source follower with its drain grounded, rather than a common-source input device. It also correctly notes the lack of cascode output-resistance boosting; minor extra analysis does not affect the essential answer.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 14691,
        "total_tokens": 16215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13697,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 14691,
        "total_tokens": 16215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13697,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer: **No – it is not a cascode.**\n\nAt first glance it looks like one (two stacked devices, a dc bias `V_b1` on the upper gate, the input on the lower gate, output at the top through `R_D`), but look carefully at the **source arrows**:\n\n| device | arrow says | role |\n|---|---|---|\n| **M₂** | arrow points *out* of the bottom terminal → that terminal is the **source** (node X), drain = output node | NMOS **common‑gate** device ✔ |\n| **M₁** | arrow points *into* the **top** terminal → the top terminal (node X) is the **source**; the grounded terminal is its **drain** (PMOS) | **common‑drain (source follower)** ✘ |\n\nSo the drain of M₁ — not its source — sits at ac ground, and the signal applied to its gate comes out at its **source**, node X. (The bias current is consistent: V_DD → R_D → M₂ (drain‑to‑source) → X → M₁ (source‑to‑drain) → ground.)\n\n## Why that disqualifies it\n\nA cascode is, by definition, a **common‑source (or common‑emitter) device whose drain current is delivered into the source of a common‑gate device**. Here there is no common‑source transistor at all; the circuit is a **source follower driving a common‑gate stage (CD–CG cascade)**.\n\nConsequences:\n\n**1. Low, non‑inverting gain.** The follower sees the CG input resistance ≈ 1/g_m2 as its load:\n\n$$\\frac{v_X}{v_{in}}\\approx\\frac{g_{m1}}{g_{m1}+g_{m2}},\\qquad \\frac{v_{out}}{v_X}\\approx g_{m2}R_D$$\n\n$$A_v\\approx\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\\;\\xrightarrow{\\;g_{m1}=g_{m2}\\;}\\;\\tfrac{1}{2}g_mR_D$$\n\ni.e. *half* the gain of a simple CS stage, and **non‑inverting** (a cascode is inverting, with |A_v| ≈ g_{m1}R_D).\n\n**2. No impedance boosting.** Looking into M₂'s source we now see only the follower's output resistance ≈ 1/g_m1, so\n\n$$R_{out}\\approx r_{O2}\\left(1+\\frac{g_{m2}}{g_{m1}}\\right)\\approx 2r_{O2}$$\n\ninstead of the cascode's $g_{m2}r_{O2}r_{O1}$.\n\n**3. No Miller‑effect benefit**, since there is no common‑source device whose gate–drain capacitance is being shielded.\n\n## What it should look like\n\nFlip M₁ so that it is an NMOS with its **source grounded** and its **drain tied to M₂'s source** (node X). Then M₁ is common‑source, M₂ is common‑gate, and you have a true cascode with $A_v\\approx-g_{m1}R_D$ and a greatly boosted output resistance.",
        "format": "markdown",
        "sha256": "9c4e9d619b8ede74bd520656e676fd0de41ccebfdd1fab1cf793fd026c43b4d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says it is not a cascode and identifies M1 as a PMOS source follower with its drain grounded, so the common-source device and cascode resistance boost are absent.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 14036,
        "total_tokens": 15560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 14036,
        "total_tokens": 15560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer: **No — it is not a cascode.**\n\n### Why\n\nLook carefully at the source arrows. The arrow of **M₂** points *out* of the device at its bottom terminal (NMOS, source at node X), while the arrow of **M₁** points *into* the device at its **top** terminal (PMOS, source at node X, drain grounded).\n\nSo the two transistors have their **sources tied together** at node X:\n\n| Device | Gate | Source | Drain |\n|---|---|---|---|\n| M₁ (PMOS) | V_in | X | ground |\n| M₂ (NMOS) | V_b1 | X | V_out |\n\nA true cascode requires the input device to act as a **common‑source** stage – source at (ac) ground, **drain** feeding the source of the common‑gate device. Here M₁'s drain is grounded and its source drives X, so:\n\n* **M₁ = source follower (common‑drain)** driving node X\n* **M₂ = common‑gate** stage\n\ni.e. a **CD–CG cascade**, not a CS–CG (cascode) cascade. (Note the DC current path is still legitimate: V_DD → R_D → M₂(D→S) → X → M₁(S→D) → gnd, so the circuit does bias up — it just isn't a cascode.)\n\n### Small-signal consequences (ignoring λ)\n\nLooking into M₁'s source (drain grounded) we see only ≈ 1/g_m1, so\n\n$$v_X=\\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in},\\qquad v_{out}=+g_{m2}R_D\\,v_X$$\n\n$$\\boxed{A_v=\\frac{R_D}{\\dfrac{1}{g_{m1}}+\\dfrac{1}{g_{m2}}}\\;\\;\\xrightarrow[g_{m1}=g_{m2}]{}\\;\\;+\\frac{g_mR_D}{2}}$$\n\n* The gain is **non‑inverting** and only about **half** that of a simple CS stage (a cascode gives −g_{m1}R_D).\n* The output resistance seen at M₂'s drain is only\n $R_{out}\\approx r_{o2}(1+g_{m2}/g_{m1})+1/g_{m1}\\approx 2r_{o2}$,\n not the $g_{m2}r_{o2}r_{o1}$ boost that defines a cascode — because M₂ is degenerated by the *low* impedance 1/g_m1 instead of the high impedance r_o1 of a CS device.\n\n### The fix\n\nIf M₁ were an **NMOS** with its source grounded and its **drain** connected to X (M₂'s source), the topology would indeed be a cascode, with $A_v\\approx -g_{m1}R_D$ and the familiar impedance‑boosting property.",
        "format": "markdown",
        "sha256": "c69a098ac441b428cb9ab4c7b09c324cd10dc10678331e9c2489895258c90279"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower and M2 as a common-gate device, so the circuit is not a cascode and lacks the cascode resistance boost. The output-resistance approximation is consistent with the expected result.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 15336,
        "total_tokens": 16860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14398,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 15336,
        "total_tokens": 16860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14398,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## The Miller effect in a nutshell\n\nA capacitance $C_F$ bridging the input and output of an inverting stage with voltage gain $-A_v$ looks, from the input, like\n\n$$C_{\\text{in,Miller}} = C_F\\,(1 + A_v)$$\n\nbecause the far end of the capacitor swings in the opposite direction, so the charge it demands from the driving source is amplified.\n\n## Why it hurts a plain common-source/common-emitter stage\n\nIn a CS stage, $C_{gd}$ bridges gate and drain, and the gain across it is the *full* stage gain:\n\n$$A_v = g_{m1}R_L \\quad \\Rightarrow \\quad C_{\\text{in}} \\approx C_{gs1} + C_{gd1}(1 + g_{m1}R_L)$$\n\nWith $g_mR_L = 100$, a 10 fF $C_{gd}$ looks like ~1 pF. Combined with the source resistance $R_S$, this usually creates the dominant pole, $\\omega_{p,\\text{in}} \\approx 1/(R_S C_{\\text{in}})$, and the bandwidth collapses.\n\n## What the cascode changes\n\nIn a cascode, the drain of $M_1$ no longer drives the load — it drives the **source of the common-gate device $M_2$**, whose input resistance is low:\n\n$$R_X = \\frac{R_L + r_{o2}}{1 + g_{m2}r_{o2}} \\;\\approx\\; \\frac{1}{g_{m2}} + \\frac{R_L}{g_{m2}r_{o2}}$$\n\nSo the gain *seen across $C_{gd1}$* is only\n\n$$A_{v1} = -g_{m1}R_X \\approx -\\frac{g_{m1}}{g_{m2}} \\approx -1$$\n\nand therefore\n\n$$C_{\\text{in}} \\approx C_{gs1} + C_{gd1}\\left(1 + \\frac{g_{m1}}{g_{m2}}\\right) \\approx C_{gs1} + 2C_{gd1}$$\n\nThe multiplication factor drops from $\\sim(1+g_mR_L)$ to $\\sim 2$ — a 50× reduction in the example above.\n\n**The key point:** the overall gain is *not* sacrificed. It is simply relocated. $M_1$ now acts as a transconductor delivering current into a low-impedance node, and $M_2$ passes that current to the high-impedance output node where the voltage gain is developed. The large voltage swing has been moved to a node that the input no longer \"sees\" through a capacitor.\n\n## The second, equally important reason: shielding\n\nLook at the capacitors of the cascode device $M_2$:\n\n- $C_{gs2}$ connects node $X$ to the gate, which is an **AC ground** → it is just a shunt capacitor at $X$.\n- $C_{gd2}$ connects the output to the same **AC ground** → it is just a shunt capacitor at the output.\n\nThere is **no capacitor bridging input and output of $M_2$**. The cascode transistor therefore acts as a unilateral buffer that electrically isolates (screens) the input node from the output swing. This is the same reason cascodes improve reverse isolation ($S_{12}$) and stability in RF amplifiers, and why they were used as \"screen grids\" in pentodes long before MOSFETs.\n\n## Where the cost shows up\n\nNothing is free; the pole structure is just rearranged:\n\n- **New pole at node $X$:** $\\omega_{pX} \\approx \\dfrac{1}{R_X\\,(C_{db1}+C_{gd1}+C_{sb2}+C_{gs2})}$. Because $R_X \\approx 1/g_{m2}$, this pole sits near $f_T$ and is normally non-dominant.\n- **Dominant pole at the output:** $\\omega_{p,\\text{out}} \\approx \\dfrac{1}{R_{\\text{out}}(C_L + C_{db2}+C_{gd2})}$, with $R_{\\text{out}} \\approx g_{m2}r_{o2}r_{o1}\\|R_L$. For a high-gain cascode the output pole is low, but it is a *well-behaved* dominant pole, and the gain–bandwidth product is much higher than the CS stage's.\n\n## Caveats\n\n1. **It isn't eliminated, just tamed.** $C_{gd1}$ is still roughly doubled, and there is still a feedforward path at very high frequencies.\n2. **Very high load resistance brings some Miller back.** If the cascode drives another cascoded current source, $R_X \\approx R_L/(g_{m2}r_{o2})$ can become comparable to or larger than $1/g_{m2}$, so the drain of $M_1$ does swing a bit and the Miller multiplication rises above 2. This matters in telescopic-cascode op amps.\n3. **Headroom penalty.** The reduced Miller effect is bought with one extra $V_{DSAT}$ (or $V_{CE,sat}$) of stacked voltage, which is why cascodes are hard to use at low supply voltages.\n4. The same argument applies verbatim to BJTs: $C_\\mu$ of $Q_1$ sees a gain of $\\approx -g_{m1}r_{e2} \\approx -1$ instead of $-g_{m1}R_L$.",
        "format": "markdown",
        "sha256": "722d37c32c947bd38568ab273bb8e2f775611a91a0e778ab7333ca63604ef728"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance node at M1’s drain and shows that the gain across Cgd1 is roughly −gm1/gm2, giving a Miller factor near 2 rather than the full stage-gain factor. It also correctly notes the effect is reduced, not eliminated; minor approximations and ancillary claims do not undermine the essential answer.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 3422,
        "total_tokens": 3450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1648,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 3422,
        "total_tokens": 3450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1648,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Why the cascode tames the Miller effect\n\n## 1. Where the Miller effect comes from\n\nMiller multiplication needs **two** ingredients:\n\n1. A capacitance **bridging input and output** ($C_{gd}$ in a MOSFET, $C_\\mu$ in a BJT), and\n2. A **large inverting voltage gain** across that capacitance.\n\nFor a simple common-source stage with load $R_L$, the gain across $C_{gd}$ is $A_v = -g_m R_L$, so the gate sees\n\n$$C_{in} = C_{gs} + C_{gd}\\,(1 + g_m R_L)$$\n\nWith $g_m R_L = 50$, a 10 fF $C_{gd}$ looks like 510 fF. Driven from a source resistance $R_S$, the input pole\n\n$$\\omega_{p,in} = \\frac{1}{R_S\\left[C_{gs} + C_{gd}(1+g_mR_L)\\right]}$$\n\ncollapses, and bandwidth goes with it.\n\n## 2. What the cascode changes\n\nA cascode stacks a common-gate device $M_2$ on top of $M_1$. The drain of $M_1$ now sees the **source** of $M_2$, which is a low-impedance node:\n\n$$R_X = \\frac{r_{o2} + R_L}{1 + g_{m2}r_{o2}} \\;\\approx\\; \\frac{1}{g_{m2}} + \\frac{R_L}{g_{m2}r_{o2}}$$\n\nSo the gain *from the gate of $M_1$ to its own drain* is no longer $-g_mR_L$ but\n\n$$A_X = -g_{m1}\\left(r_{o1}\\,\\|\\,R_X\\right) \\approx -\\frac{g_{m1}}{g_{m2}} \\approx -1$$\n\n**The capacitor is still there — the gain across it is gone.** The input capacitance becomes\n\n$$C_{in} \\approx C_{gs1} + C_{gd1}\\left(1 + \\frac{g_{m1}}{g_{m2}}\\right) \\approx C_{gs1} + 2C_{gd1}$$\n\nA Miller factor of ~2 instead of ~51 in the example above.\n\n## 3. Why you don't lose the gain\n\n$M_1$ still converts $v_{in}$ into a signal current $g_{m1}v_{in}$. $M_2$ is a **current buffer** (unity current gain) that passes that current to the high-impedance output node, so\n\n$$A_v \\approx -g_{m1}R_{out},\\qquad R_{out}\\approx g_{m2}r_{o2}r_{o1}\\,\\|\\,R_L$$\n\nThe large voltage swing has simply been **relocated** from the drain of $M_1$ to the drain of $M_2$ — a node that has *no capacitive path back to the input*. $C_{gd2}$ connects the output to $M_2$'s gate, which is an AC ground: it loads the output but provides no feedback. The cascode device acts as a shield, which is also why cascodes give excellent reverse isolation ($S_{12}$) and avoid the $C_\\mu$-induced instability of tuned RF common-emitter stages.\n\n## 4. Where the capacitance went: the node-$X$ pole\n\nThe cascode doesn't make capacitance disappear; it trades a *low-frequency* input pole for a *high-frequency* internal pole:\n\n$$\\omega_X \\approx \\frac{g_{m2}}{C_{db1} + C_{gd1} + C_{gs2} + C_{sb2}}$$\n\nBecause $R_X \\approx 1/g_{m2}$ is small, this pole typically sits near $f_T$ and is non-dominant. That's the whole trick: a large capacitance at a low-impedance node costs you nothing.\n\n## 5. Caveats\n\n- **Very large $R_L$ brings Miller back.** If the cascode drives a cascoded current source, $R_X \\approx 1/g_{m2} + R_L/(g_{m2}r_{o2})$ can grow to kΩ, and $A_X$ is no longer ≈ −1. The Miller reduction degrades (though usually the *output* pole dominates by then anyway).\n- **The dominant pole often moves to the output**, since $R_{out}$ is now much larger — a cascode improves input-side bandwidth but may not improve the overall $-3$ dB point unless the load is resistive/buffered.\n- **Headroom cost**: one extra $V_{DSAT}$ (or $V_{CE,sat}$) of stacked supply voltage.\n\n## One-line answer\n\nIn a common-source/emitter stage, $C_{gd}$ sees the full inverting gain $-g_mR_L$; in a cascode the common-gate device clamps that node to $\\approx 1/g_m$, so $C_{gd}$ sees a gain of only $\\approx -1$ and is multiplied by ~2 instead of $1+g_mR_L$ — the gain is still realized, just at an output node with no feedback capacitance to the input.",
        "format": "markdown",
        "sha256": "076df2b410b4847dd08f5f9d5d938802786af8dad9705e2d18c2fd10e29509ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the low-impedance node at M1’s drain and the resulting gain across Cgd1 of roughly −1, giving a Miller factor near 2 rather than the full stage-gain factor. The wording that the gain is “gone” is tempered by the correct quantitative explanation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 3861,
        "total_tokens": 3889,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2191,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 3861,
        "total_tokens": 3889,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2191,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## The Miller effect in one line\n\nAny impedance $Z$ bridging the input and output of an inverting stage with voltage gain $A_v = v_{out}/v_{in}$ appears at the input as\n\n$$Z_{in} = \\frac{Z}{1-A_v}$$\n\nFor the gate–drain capacitance $C_{gd}$ (or $C_\\mu$ in a BJT), this means\n\n$$C_{in,\\text{eff}} = C_{gd}\\,(1+|A_v|)$$\n\nSo the problem isn't the capacitor's size — it's that it sits across a node pair with large gain between them.\n\n## Why a plain common-source stage suffers\n\nFor a CS stage, $A_v = -g_{m}R_L$, which might be 50–200. The input node then sees\n\n$$C_{in} = C_{gs} + C_{gd}(1+g_mR_L)$$\n\nWith a source resistance $R_S$, the input pole lands at $1/[2\\pi R_S C_{in}]$ — often the bandwidth limiter, because a 10 fF $C_{gd}$ behaves like 1 pF.\n\n## What changes in the cascode\n\n```\n            Vout\n             |\n            [R_L]\n             |\n   VB ---|[ M2   (common gate)\n             |\n             X   (drain of M1)\n             |\n   Vin ---|[ M1   (common source)\n             |\n            GND\n```\n\nThe trick is that the gain is **split between two nodes**, and the big gain no longer appears across $C_{gd1}$.\n\n**1. The input device now drives a low impedance.**\nThe load on M1 is the input resistance of the common-gate device M2:\n\n$$R_{in,CG} = \\frac{R_L + r_{o2}}{1+(g_{m2}+g_{mb2})r_{o2}} \\approx \\frac{1}{g_{m2}+g_{mb2}} \\quad\\text{(for moderate } R_L)$$\n\nSo the gain from the input to node X is only\n\n$$A_{v1} = -\\frac{g_{m1}}{g_{m2}+g_{mb2}} \\approx -1$$\n\nand the Miller multiplier collapses from $(1+g_{m1}R_L)$ to roughly $2$.\n\n**2. The cascode device's own $C_{gd}$ isn't a feedback capacitor.**\nM2's gate is at AC ground, so $C_{gd2}$ runs from the output node to ground. It never bridges input and output, so it gets no Miller multiplication at all — it merely adds to the output load capacitance.\n\n**3. The common-gate device provides reverse isolation.**\nSignal fed from the output back toward node X is attenuated by $\\sim 1/(g_{m2}r_{o2})$, so the high-gain output swing is largely shielded from the input. (This is exactly why the cascode was invented for tube RF amplifiers: suppressing feedback that caused tuned-input/tuned-output oscillation.)\n\n## Numerical feel\n\nTake $g_m = 1$ mS, $R_L = 100$ kΩ, $C_{gd} = 10$ fF, $C_{gs}=50$ fF.\n\n| | CS | Cascode |\n|---|---|---|\n| Gain across $C_{gd1}$ | −100 | ≈ −1 |\n| Miller capacitance | 10 fF × 101 ≈ **1.01 pF** | 10 fF × 2 = **20 fF** |\n| Total $C_{in}$ | ≈ 1.06 pF | ≈ 70 fF |\n\nA ~15× improvement in the input pole, with essentially the same DC gain.\n\n## Where the \"lost\" gain and pole go\n\nThe overall gain $-g_{m1}R_L$ is still there, it's just taken across M2. The price is a new pole at node X, but because the resistance there is only $\\sim 1/g_{m2}$, that pole sits at $\\omega_X \\approx g_{m2}/C_X$ — typically near $f_T$ and therefore harmless. You've traded one low-frequency pole for two high-frequency ones.\n\n## Caveats worth remembering\n\n- **Very high $R_L$ brings the Miller effect back.** If the cascode drives a true current-source load (telescopic op-amp), $R_{in,CG} \\approx R_L/(g_{m2}r_{o2})$ can be large, and $|A_{v1}|$ is no longer ~1. The saving grace is that at the frequencies where it matters the output node is capacitively loaded, so its impedance has already dropped.\n- **It's the resistance seen by M1's drain that matters, not the \"cascode\" label.** Size/bias M2 so that $g_{m2} \\gtrsim g_{m1}$; a weak cascode device gives $|A_{v1}| = g_{m1}/g_{m2} > 1$ and partially restores the Miller multiplication.\n- **Cost:** one $V_{DSsat}$ of headroom, extra noise from M2 at high frequency, and a bias voltage to generate.",
        "format": "markdown",
        "sha256": "b8acf79acbf11ca1f57a96300a65ec4556a9e81c16ed3428546a340003159573"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance node at M1’s drain and the resulting local gain of about −gm1/(gm2+gmb2), so Cgd1’s Miller multiplier is roughly 2 rather than the full-stage gain.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 3207,
        "total_tokens": 3235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1555,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 3207,
        "total_tokens": 3235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1555,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n**M₁ (PMOS):** source at $V_{DD}$, gate at a fixed bias $V_{b2}$, drain at $V_{out}$ → its gate–source voltage is constant, so it is simply a **current source (active load)** whose only small‑signal element is $r_{O1}$.\n\n**M₂ (NMOS):** gate at a fixed bias $V_{b1}$, **source driven by $V_{in}$**, drain at $V_{out}$ → the input enters at the *source* and the output is taken at the *drain* with the gate ac‑grounded.\n\n$$\\boxed{\\text{Common-gate stage with a PMOS current-source load}}$$\n\nBecause the source of M₂ moves with the input while its bulk is tied to ground, **body effect must be included** ($v_{bs2}=-v_{in}$), i.e. $g_{mb2}$ appears in parallel with $g_{m2}$. M₁ has its bulk tied to its source ($V_{DD}$), so it has no body effect.\n\n## 2. Bias requirements\n\n* The dc current is set by **both** devices: $I_{D1}$ by $|V_{GS1}|=V_{DD}-V_{b2}$ and $I_{D2}$ by $V_{GS2}=V_{b1}-V_{in,DC}$. They must be equal, otherwise the output rails — i.e. the input source must supply the dc source voltage, and $V_{b1},V_{b2}$ must be matched (in practice a replica/feedback bias is used).\n* Saturation: M₁ needs $V_{out}\\le V_{DD}-|V_{OV1}|$; M₂ needs $V_{out}\\ge V_{b1}-V_{TH2}$, i.e. $V_{out}-V_{in,DC}\\ge V_{OV2}$.\n\n## 3. Small-signal analysis\n\nWith $v_g=0$, $v_s=v_{in}$, $v_d=v_{out}$, the current flowing **into** the drain of M₂ is\n\n$$i_d=g_{m2}(0-v_{in})+g_{mb2}(0-v_{in})+\\frac{v_{out}-v_{in}}{r_{O2}}$$\n\nKCL at the output node (M₁ contributes $-v_{out}/r_{O1}$):\n\n$$-\\frac{v_{out}}{r_{O1}}=-(g_{m2}+g_{mb2})v_{in}+\\frac{v_{out}-v_{in}}{r_{O2}}$$\n\n### Voltage gain (ideal source drive)\n\n$$\\frac{v_{out}}{v_{in}}=\\frac{(g_{m2}+g_{mb2})+\\dfrac{1}{r_{O2}}}{\\dfrac{1}{r_{O1}}+\\dfrac{1}{r_{O2}}}\n=\\Big[1+(g_{m2}+g_{mb2})r_{O2}\\Big]\\frac{r_{O1}\\Vert r_{O2}}{r_{O2}}$$\n\n$$\\boxed{A_v\\simeq (g_{m2}+g_{mb2})\\,(r_{O1}\\Vert r_{O2})\\qquad(\\text{non-inverting, }g_mr_O\\gg1)}$$\n\n### Input resistance (looking into the source of M₂)\n\n$$R_{in}=\\frac{r_{O2}+r_{O1}}{1+(g_{m2}+g_{mb2})r_{O2}}\\;\\approx\\;\\frac{1}{g_{m2}+g_{mb2}}+\\frac{r_{O1}}{(g_{m2}+g_{mb2})r_{O2}}$$\n\nSo $R_{in}\\approx 1/(g_{m2}+g_{mb2})$ only if the load $r_{O1}$ is not much larger than $r_{O2}$ — a high‑impedance load *raises* $R_{in}$.\n\n### Output resistance (looking into the drain)\n\nWith an ideal input source ($R_S=0$): $R_{out}=r_{O1}\\Vert r_{O2}$.\nWith a source resistance $R_S$: $R_{out}=r_{O1}\\Vert\\big[r_{O2}+R_S+(g_{m2}+g_{mb2})r_{O2}R_S\\big]$.\n\n### Gain with a finite source resistance $R_S$\n\n$$\\frac{v_{out}}{v_{in}}=\\frac{\\big[1+(g_{m2}+g_{mb2})r_{O2}\\big]r_{O1}}{r_{O1}+r_{O2}+R_S\\big[1+(g_{m2}+g_{mb2})r_{O2}\\big]}\\;\\xrightarrow{\\;g_mr_O\\gg1\\;}\\;\\frac{(g_{m2}+g_{mb2})(r_{O1}\\Vert r_{O2})}{1+(g_{m2}+g_{mb2})(R_S\\,\\|\\,\\text{...})}$$\n\n(If the stage is driven by a *current* source $i_{in}$, the transimpedance is simply $v_{out}/i_{in}\\approx r_{O1}\\Vert r_{O2}$ … more precisely $A_v R_{in}=r_{O1}$ exactly.)\n\n## 4. Summary / comments\n\n| Quantity | Result |\n|---|---|\n| Type | Common gate, non‑inverting |\n| $A_v$ | $\\approx(g_{m2}+g_{mb2})(r_{O1}\\Vert r_{O2})$ |\n| $R_{in}$ | $(r_{O1}+r_{O2})/[1+(g_{m2}+g_{mb2})r_{O2}]$ (low) |\n| $R_{out}$ | $r_{O1}\\Vert r_{O2}$ (for $R_S=0$) |\n\n* Gain is **non‑inverting** and essentially equal to the intrinsic gain of M₂ degraded only by $r_{O1}$; using a current‑source load instead of a resistor maximizes it while allowing a large bias current.\n* **Low input impedance** → useful for 50 Ω/transmission‑line termination or for accepting current signals (e.g., photodiode, current‑mode input), but a poor voltage buffer input.\n* **No Miller multiplication** of $C_{GD2}$ (gate is ac ground), so bandwidth is high: input pole $\\approx 1/[R_{in}(C_{GS2}+C_{SB2})]$, output pole $\\approx 1/[(r_{O1}\\Vert r_{O2})(C_{DB2}+C_{GD2}+C_{DB1}+C_{GD1}+C_L)]$ — the output pole usually dominates.\n* Drawback: no dc isolation of the input (the source draws dc current), and the dc operating point depends on matching $V_{b1}$, $V_{b2}$ and the input dc level.",
        "format": "markdown",
        "sha256": "68f2202a20225e00deac60b9bcc40d28651afee427f12879824ec43d541490e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places Vin at M2’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. Its gain expression is equivalent to the golden result; extra detail does not contradict the essential analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1336,
        "output_tokens": 5174,
        "total_tokens": 6510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2857,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1336,
        "output_tokens": 5174,
        "total_tokens": 6510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2857,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the topology\n\n**M₁ (PMOS):** source at V_DD, gate at the fixed bias V_b2, drain at the output node.\n→ Both its gate and source are at ac ground, so M₁ carries a **constant drain current** and, for small signals, it is nothing but a resistor **r_O1** from V_out to ac ground. It is a *current‑source (active) load*.\n\n**M₂ (NMOS):** gate at the fixed bias V_b1, **source driven by V_in**, drain at V_out.\n→ The gate is at ac ground and the signal enters at the source: M₂ is a **common‑gate stage**.\n\nSo the circuit is a **common‑gate amplifier with a PMOS current‑source load** (non‑inverting, low input impedance, high gain).\n\n## Bias considerations\n\n* The dc current is set by M₁: I_D = ½μ_pC_ox(W/L)₁(V_DD − V_b2 − |V_TH,p|)².\n* The dc level of V_in must then satisfy V_GS2 = V_b1 − V_IN,dc so that M₂ carries exactly that same current — the stage is **not self‑biased**; because the load is a current source, V_out is extremely sensitive to any mismatch (in practice feedback or a resistive/degenerated load is needed).\n* Saturation requirements: V_out ≤ V_b2 + |V_TH,p| (M₁), and V_out ≥ V_b1 − V_TH,n (M₂).\n\n## Small-signal analysis\n\nAC grounds: V_DD, V_b1, V_b2. For M₂: v_gs = −v_in, v_bs = −v_in (bulk at ground ⇒ body effect active).\n\nKCL at the output node (current into the node through r_O1 = current into M₂'s drain):\n\n$$-\\frac{v_{out}}{r_{O1}} = -(g_{m2}+g_{mb2})v_{in}+\\frac{v_{out}-v_{in}}{r_{O2}}$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\Big(g_{m2}+g_{mb2}+\\frac{1}{r_{O2}}\\Big)\\big(r_{O1}\\!\\parallel\\! r_{O2}\\big)=\\big[1+(g_{m2}+g_{mb2})r_{O2}\\big]\\frac{r_{O1}}{r_{O1}+r_{O2}}}$$\n\nThe gain is **positive (non‑inverting)**, as expected for a CG stage.\n\n**Limiting cases**\n\n| Assumption | Result |\n|---|---|\n| λ₂ = 0 (ideal M₂) | A_v = (g_m2+g_mb2) r_O1 |\n| λ₁ = 0 (ideal current source) | A_v = 1 + (g_m2+g_mb2) r_O2 |\n| g_m r_O ≫ 1 | A_v ≈ (g_m2+g_mb2)(r_O1∥r_O2) |\n| Source tied to bulk (own well) | set g_mb2 = 0 |\n\n## Impedances\n\n**Input (looking into the source of M₂, with r_O1 as drain load):**\n\n$$R_{in}=\\frac{r_{O2}+r_{O1}}{1+(g_{m2}+g_{mb2})r_{O2}}\\;\\;\\xrightarrow[r_{O1}\\approx r_{O2}]{}\\;\\;\\approx\\frac{2}{g_{m2}+g_{mb2}}$$\n\ni.e. low — the classic CG property. (Note: with a finite source resistance R_S the gain is degraded by the factor R_in/(R_in+R_S); here V_in is ideal, so no loss.)\n\n**Output (looking into V_out with V_in shorted, i.e. source of M₂ at ac ground):**\n\n$$R_{out}=r_{O1}\\parallel r_{O2}$$\n\nConsistency check: A_v = G_m·R_out with G_m = g_m2 + g_mb2 + 1/r_O2. ✔\n\n## Summary\n\nM₁ is a current‑source load (r_O1), M₂ is a common‑gate amplifier. The stage gives a non‑inverting gain ≈ (g_m2+g_mb2)(r_O1∥r_O2), a low input resistance ≈ (r_O1+r_O2)/[1+(g_m2+g_mb2)r_O2], and an output resistance r_O1∥r_O2. Its drawback is the fragile dc operating point: the input source itself must set V_GS2 consistently with the current forced by M₁.",
        "format": "markdown",
        "sha256": "659bbbe1aa37e6781e7cd4002cf646b24f2f75860ef744bbed59d51106241a88"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places Vin at M2’s source, and gives the non-inverting gain and low input resistance. The gain expression is equivalent to the golden solution; additional details are consistent.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1336,
        "output_tokens": 6833,
        "total_tokens": 8169,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5290,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1336,
        "output_tokens": 6833,
        "total_tokens": 8169,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5290,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n* **M₂ (NMOS):** its **gate is tied to a dc bias V_b1**, the **signal is applied to its source**, and the **drain is the output**. → M₂ is a **common‑gate (CG) stage**.\n* **M₁ (PMOS):** source at V_DD, gate at the dc bias V_b2, drain at V_out. Since V_b2 is constant, M₁ carries no signal gate drive → it is a **current‑source (active) load**, whose only small‑signal element is its output resistance **r_O1**.\n\nSo the circuit is a **common‑gate amplifier with a PMOS current‑source load**.\n\n## 2. Bias considerations\n\nBoth devices must carry the same current:\n\n$$I_{D1}=\\tfrac12\\mu_pC_{ox}\\Big(\\tfrac{W}{L}\\Big)_1\\big(V_{DD}-V_{b2}-|V_{THp}|\\big)^2\n=I_{D2}=\\tfrac12\\mu_nC_{ox}\\Big(\\tfrac{W}{L}\\Big)_2\\big(V_{b1}-V_{IN}-V_{THn}\\big)^2$$\n\nThus the **dc level of V_in together with V_b1 sets I_D2, while V_b2 sets I_D1**; these two \"current sources\" must be made equal, otherwise V_out slams toward a rail and one transistor leaves saturation. (M₂ conducts only if $V_{b1}-V_{IN}>V_{THn}$.)\n\nSaturation (output swing) limits:\n\n$$V_{b1}-V_{TH2}\\;\\le\\;V_{out}\\;\\le\\;V_{b2}+|V_{THp}|$$\n\n## 3. Small‑signal analysis (body effect included, bulk of M₂ at ground)\n\nWith the gate and V_DD as ac grounds, let $v_{gs2}=v_{bs2}=-v_{in}$, load = r_O1.\n\nKCL at the output node:\n\n$$-\\frac{v_{out}}{r_{O1}}=-(g_{m2}+g_{mb2})v_{in}+\\frac{v_{out}-v_{in}}{r_{O2}}$$\n\n**Voltage gain**\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\Big(g_{m2}+g_{mb2}+\\frac{1}{r_{O2}}\\Big)\\big(r_{O1}\\!\\parallel\\! r_{O2}\\big)\n=\\frac{r_{O1}\\big[1+(g_{m2}+g_{mb2})r_{O2}\\big]}{r_{O1}+r_{O2}}}$$\n\n$$\\xrightarrow[\\ r_{O2}\\to\\infty\\ ]{}\\;A_v\\simeq (g_{m2}+g_{mb2})\\,r_{O1}$$\n\nThe gain is **positive (non‑inverting)**: raising V_in reduces V_GS2, reduces I_D2, and lets the PMOS pull V_out up. Body effect *helps* the gain here (adds to g_m).\n\n**Input resistance** (looking into the source):\n\n$$\\boxed{R_{in}=\\frac{r_{O1}+r_{O2}}{1+(g_{m2}+g_{mb2})r_{O2}}\\;\\approx\\;\\frac{1}{g_{m2}+g_{mb2}}+\\frac{r_{O1}}{(g_{m2}+g_{mb2})r_{O2}}}$$\n\nNote the important consequence: because the load is a **high‑impedance current source**, R_in is *not* simply $1/(g_m+g_{mb})$ — the second term (≈ r_O1/[(g_m+g_mb)r_O2]) can dominate. With an ideal current source (r_O1 → ∞), R_in → ∞.\n\n**Output resistance**\n\n* Ideal input source (R_S = 0): $R_{out}=r_{O1}\\parallel r_{O2}$\n* With a finite source resistance R_S: $R_{out}=r_{O1}\\parallel\\big[r_{O2}+(1+(g_{m2}+g_{mb2})r_{O2})R_S\\big]$\n\n**Gain from a source with resistance R_S**\n\n$$\\frac{v_{out}}{v_{sig}}=\\Big(g_{m2}+g_{mb2}+\\frac{1}{r_{O2}}\\Big)(r_{O1}\\!\\parallel\\! r_{O2})\\cdot\\frac{R_{in}}{R_{in}+R_S}$$\n\nso the stage loads the driving source heavily unless R_S ≪ R_in.\n\n## 4. Summary / remarks\n\n| Quantity | Result |\n|---|---|\n| Function | Non‑inverting common‑gate amp, current‑source load |\n| A_v | $(g_{m2}+g_{mb2}+g_{ds2})(r_{O1}\\|r_{O2})\\approx(g_{m2}+g_{mb2})(r_{O1}\\|r_{O2})$ |\n| R_in | $(r_{O1}+r_{O2})/[1+(g_{m2}+g_{mb2})r_{O2}]$ |\n| R_out | $r_{O1}\\|r_{O2}$ (R_S = 0) |\n\n* The achievable gain is limited to ≈ $(g_m+g_{mb})(r_{O1}\\|r_{O2})$, i.e. of order the intrinsic gain — using a current source instead of a resistor maximizes it for a given headroom.\n* Because V_GD of M₂ sees no Miller multiplication (gate is ac ground), the CG stage has excellent high‑frequency behavior; the poles are set by $C_{GS2}+C_{SB2}$ at the input node and $C_{DB2}+C_{GD2}+C_{DB1}+C_{GD1}$ at the high‑impedance output node (the latter usually dominates).\n* Practical drawback: the dc current must be set by matching I_D1 and I_D2, and the signal source must supply the bias current of M₂ (dc path into the source), so in practice ac coupling plus a tail current source, or feedback to define V_out, is needed.",
        "format": "markdown",
        "sha256": "4ed9d758c2abd04a63acf81fa0c8f2dfc7bf933e961af25fb875aaed2cb30266"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places Vin at M2’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. The gain expression is equivalent to the golden result; the additional detail does not undermine the essential analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1336,
        "output_tokens": 6464,
        "total_tokens": 7800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4383,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1336,
        "output_tokens": 6464,
        "total_tokens": 7800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4383,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Two poles\n\n**Why:** Even though five capacitors are drawn, the number of poles equals the number of *independent nodes* that have capacitance to ground (counting Miller‑split caps at the nodes they terminate on).\n\n**Node 1 – gate of M₁ (input node):**\nDriven by $R_S$, loaded by $C_{GS}$ plus the Miller‑multiplied $C_{GD}$:\n\n$$\\omega_{p1}=\\frac{1}{R_S\\big[C_{GS}+(1+g_{m1}R_{out})C_{GD}\\big]}$$\n\n**Node 2 – drain of M₁ = drain of M₂ = $V_{out}$:**\nAll the remaining capacitors ($C_{DB}$, $C_{DB2}$, $C_{GD2}$, and the Miller output component of $C_{GD}$) tie from this single node to ac ground, since the gate of M₂ is an ac ground:\n\n$$\\omega_{p2}=\\frac{1}{R_{out}\\big[C_{DB}+C_{DB2}+C_{GD2}+C_{GD}\\big]},\\qquad R_{out}=r_{O1}\\|r_{O2}$$\n\nBecause $C_{GD2}$ and $C_{DB2}$ both return to ac ground, they do **not** create extra nodes — so the circuit is a **two‑pole** system (plus one right‑half‑plane zero at $g_{m1}/C_{GD}$).",
        "format": "markdown",
        "sha256": "f40d4e36ab5780ec42fd1015948d08db1598d6fe3235aadec2f3e9ec0fc4c99f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent dynamic nodes—the M1 gate and the output—and assigns the capacitances to those nodes. The approximate pole formulas and RHP-zero detail do not change the correct two-pole conclusion.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 884,
        "total_tokens": 2790,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 393,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 884,
        "total_tokens": 2790,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 393,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Counting the Independent Nodes\n\nA pole is associated with each node of the circuit that has a capacitance to ground and a resistance to ground (i.e., each independent time constant). So we just count the **nodes**, not the capacitors.\n\n**Node 1 – Gate of M₁ (input node):**\n- Driven by $R_S$\n- Sees $C_{GS}$ to ground and $C_{GD}$ (Miller‑multiplied) to the output\n\n**Node 2 – Drain of M₁ / M₂ (output node):**\n- Sees $r_{O1}\\|r_{O2}$ to ground\n- Sees $C_{DB1} + C_{DB2} + C_{GD2} + C_{GD}$ (Miller component)\n\nNote that the gate of M₂ is tied to a **fixed bias voltage**, which is an AC ground. Therefore $C_{GD2}$ and $C_{GS2}$ do **not** create a new node — $C_{GD2}$ simply appears as another grounded capacitor at the output, and $C_{GS2}$ is shorted out.\n\n## Answer\n\n$$\\boxed{\\text{Two poles — one at the input node, one at the output node}}$$\n\n$$\\omega_{p,\\text{in}} \\approx \\frac{1}{R_S\\left[C_{GS}+(1+g_{m1}(r_{O1}\\|r_{O2}))C_{GD}\\right]},\\qquad \n\\omega_{p,\\text{out}} \\approx \\frac{1}{(r_{O1}\\|r_{O2})\\left[C_{DB1}+C_{DB2}+C_{GD2}+C_{GD}\\right]}$$\n\n(There is also one right‑half‑plane zero at $\\omega_z = g_{m1}/C_{GD}$, but that is not a pole.)",
        "format": "markdown",
        "sha256": "e91d7aa4d352fa973396cb0a04cfd363e285886de31d24dd0a160769d232b975"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent dynamic nodes—the M1 gate and output—and the relevant capacitances. CGD couples those nodes but does not add a third pole; the approximate Miller expressions do not change the correct pole count.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 920,
        "total_tokens": 2826,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 920,
        "total_tokens": 2826,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Two poles\n\n**Why:** The number of poles equals the number of independent nodes that have a capacitance to ground (AC ground). Here the gate of $M_2$ is tied to a dc bias, so it is an **AC ground** – it is not a signal node. That leaves only two signal nodes:\n\n**Node A – input (gate of $M_1$):**\nDriven by $R_S$, loaded by $C_{GS}$ plus the Miller‑multiplied $C_{GD}$:\n\n$$\\omega_{p1}\\approx\\frac{1}{R_S\\big[C_{GS}+(1+g_{m1}R_{out})C_{GD}\\big]}$$\n\n**Node B – output:**\nSince $M_2$'s gate is an AC ground, $C_{GD2}$ and $C_{DB2}$ both appear from the output to ground, in parallel with $C_{DB}$ and the Miller component of $C_{GD}$:\n\n$$\\omega_{p2}\\approx\\frac{1}{R_{out}\\Big[C_{DB}+C_{DB2}+C_{GD2}+\\big(1+\\tfrac{1}{g_{m1}R_{out}}\\big)C_{GD}\\Big]},\\qquad R_{out}=r_{O1}\\|r_{O2}$$\n\nSo the circuit is a **two‑pole (second‑order) system** (plus one right‑half‑plane zero at $g_{m1}/C_{GD}$ if the feedforward through $C_{GD}$ is retained).",
        "format": "markdown",
        "sha256": "e87e61b5736dda79cabd2b5c53e3aef208e71837578e4427c459dad7c990a7ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles from the M1 gate and output nodes, with the capacitors assigned to the appropriate nodes. Its Miller approximations are consistent with the topology.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 906,
        "total_tokens": 2812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 906,
        "total_tokens": 2812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the topology is\n\n* `M₁`: source at ground, drain at node **X**, gate at **V_in**\n* `M₂`: source at node **X**, drain at **V_out**, gate also at **V_in**\n* `R_D` from V_DD to V_out, output taken at the drain of M₂\n\nSo this is a **cascode‑like stack of two NMOS devices whose gates are both driven by the input signal** (a \"self‑cascode\" / stacked common‑source stage) with a resistive load. The important structural fact is that **M₁, M₂ and R_D all carry the same current** (series branch).\n\n## 2. Small‑signal analysis (both devices in saturation, λ = 0, body effect of M₂ included)\n\nUnknowns: v_X (node X) and v_out.\n\nM₁ (source grounded, no body effect): \n\n$$i_{d1}=g_{m1}v_{in}$$\n\nM₂ (source at X, bulk at ground → v_bs2 = –v_X):\n\n$$i_{d2}=g_{m2}(v_{in}-v_X)-g_{mb2}v_X$$\n\n**KCL at X** (same current in series): i_d2 = i_d1\n\n$$g_{m2}(v_{in}-v_X)-g_{mb2}v_X=g_{m1}v_{in}\\;\\Longrightarrow\\;\\boxed{\\frac{v_X}{v_{in}}=\\frac{g_{m2}-g_{m1}}{g_{m2}+g_{mb2}}}$$\n\n**Output node:** the same current flows through R_D:\n\n$$v_{out}=-i_{d1}R_D=-g_{m1}v_{in}R_D$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m1}R_D}$$\n\n**Interpretation:** M₁ has its source at a fixed (ground) potential, so its gate–source voltage *is* v_in and its drain current is g_m1v_in regardless of what node X does. Since that same current must flow through R_D, the gain is set **only by M₁**. M₂ contributes **no gain**; it only acts as a cascode (shielding node X, raising output impedance). Note also that if the two devices are identical (g_m1 = g_m2), then **v_X = 0 — node X is a small‑signal virtual ground**, which also kills Miller multiplication of C_GD1 (good for bandwidth); C_GD2, however, still sees the full gain –g_m1R_D.\n\n## 3. Including channel‑length modulation\n\nWith r_o1, r_o2 and g_mb2, writing KCL at X and at the output gives\n\n$$A_v=-\\,\\frac{R_D\\,r_{o2}\\big[g_{m2}+g_{m1}A\\big]}{(1+A)\\,r_{o2}+R_D},\\qquad A\\equiv\\Big(g_{m2}+g_{mb2}+\\tfrac{1}{r_{o2}}\\Big)r_{o1}$$\n\nwhich for large r_o (A ≫ 1) collapses to A_v → –g_m1R_D, confirming the ideal result.\n\n**Impedances:** R_in = ∞ (gates only). With v_in = 0 the gate of M₂ is a.c. grounded and r_o1 degenerates it:\n\n$$R_{out}=R_D\\;\\|\\;\\big[r_{o1}+r_{o2}+(g_{m2}+g_{mb2})r_{o1}r_{o2}\\big]$$\n\n## 4. Bias‑point caveat (why this circuit is not a real cascode)\n\nFor both transistors to conduct in saturation we would need\n\n$$V_X\\ge V_{in}-V_{TH1}\\quad(\\text{M}_1\\ \\text{sat})\\qquad\\text{and}\\qquad V_X\\le V_{in}-V_{TH2}\\quad(\\text{M}_2\\ \\text{on})$$\n\nSince V_TH2 > V_TH1 (body effect on M₂), these two conditions cannot be met simultaneously for *any* sizing. In practice therefore **M₁ operates in the triode region** (it behaves like a resistor R_on1) and M₂ in saturation; the stage degenerates into a common‑source M₂ with source degeneration:\n\n$$A_v\\simeq-\\frac{g_{m2}R_D}{1+(g_{m2}+g_{mb2})R_{on1}},\\qquad R_{on1}=\\frac{1}{\\mu_nC_{ox}(W/L)_1(V_{in}-V_{TH1})}$$\n\nSo: *as an idealized exercise* (both in saturation, λ = 0) the answer is **A_v = –g_m1R_D**, independent of M₂; physically the stack cannot bias both devices in saturation, and the circuit behaves as a degenerated CS stage with reduced gain.",
        "format": "markdown",
        "sha256": "8437cb8e763527b033becb12f57b0c80a2df67820295c7878ae5237d3b82c45d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the common-gate series stack and eventually gives the correct operating regions (M1 triode, M2 saturation). But it misses the central result that the pair acts approximately like one NMOS with a longer effective channel, and instead emphasizes an invalid both-saturated cascode analysis and a source-degenerated-stage gain conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1529,
        "output_tokens": 7478,
        "total_tokens": 9007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5866,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1529,
        "output_tokens": 7478,
        "total_tokens": 9007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5866,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n* `R_D` ties the output node to `V_DD`.\n* `M₂` sits between `V_out` and the internal node **X**; `M₁` sits between **X** and ground.\n* **Both gates are tied to the same input** `V_in`, so the two NMOS devices are stacked in series (a \"cascode‑like\" stack) but driven in parallel at the gates.\n* Body terminals are at ground → `M₂` suffers body effect (`V_SB2 = V_X`), `M₁` does not.\n\nSince the devices are in series, **they carry the same drain current**, and the same current flows through `R_D`:\n\n$$V_{out}=V_{DD}-I_D R_D$$\n\n---\n\n## 2. Small‑signal gain (ideal case: both in saturation, λ = 0)\n\nKey observation: **the source of M₁ is at ac ground**, so its gate–source voltage is the full input:\n\n$$i_{D1}=g_{m1}v_{in}$$\n\nThat current has nowhere to go except through `M₂` and `R_D`, hence\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m1}R_D}$$\n\nThe gain is set **only by M₁** – exactly the same as a simple CS stage. `M₂` merely passes the current along (it just \"disappears\" from the gain expression).\n\nConsistency check at node X (with body effect on M₂):\n\n$$g_{m2}(v_{in}-v_X)-g_{mb2}v_X=g_{m1}v_{in}\\;\\Rightarrow\\; v_X=\\frac{g_{m2}-g_{m1}}{g_{m2}+g_{mb2}}\\,v_{in}$$\n\nSo node X swings with the input (it is *not* an ac ground as in a true cascode); if the devices are identical, $v_X \\approx \\frac{g_{mb}}{g_m+g_{mb}}v_{in}\\approx 0$.\n\n---\n\n## 3. Including channel‑length modulation\n\nWriting KCL at X and at the output with $r_{o1},r_{o2},g_{mb2}$:\n\n$$A_v=-\\,\\frac{R_D\\big[g_{m1}r_{o1}+g_{m2}r_{o2}+g_{m1}(g_{m2}+g_{mb2})r_{o1}r_{o2}\\big]}{R_D+r_{o1}+r_{o2}+(g_{m2}+g_{mb2})r_{o1}r_{o2}}$$\n\nand the output resistance is the usual cascode value\n\n$$R_{out}=R_D\\,\\|\\,\\big[r_{o1}+r_{o2}+(g_{m2}+g_{mb2})r_{o1}r_{o2}\\big]$$\n\nFor $r_o \\to \\infty$ this collapses to $A_v = -g_{m1}R_D$, as above.\n\n---\n\n## 4. The practical catch: M₁ cannot stay in saturation\n\nCheck the saturation conditions simultaneously:\n\n* `M₁` saturated: $V_X \\ge V_{in}-V_{TH1}$\n* `M₂` saturated (needs $V_{GS2}>V_{TH2}$): $V_{in}-V_X \\ge V_{TH2}\\Rightarrow V_X \\le V_{in}-V_{TH2}$\n\nBoth require $V_{TH2}\\le V_{TH1}$ — impossible, because body effect makes $V_{TH2}>V_{TH1}$ (and with no body effect it only holds at the degenerate point $V_{ov2}=0$, i.e. zero current).\n\n**Conclusion:** `M₁` operates in the **triode (linear) region** and `M₂` in saturation. `M₁` behaves as a resistor\n\n$$R_{on1}\\approx\\frac{1}{\\mu_nC_{ox}(W/L)_1(V_{in}-V_{TH1})}$$\n\nso the real circuit is a **common‑source stage (M₂) with source degeneration (M₁)**:\n\n$$A_v\\simeq-\\frac{g_{m2}R_D}{1+(g_{m2}+g_{mb2})R_{on1}}\\quad(\\text{plus a small term } -g_{m,\\text{tri}1}R_D)$$\n\n---\n\n## 5. Summary\n\n| Quantity | Result |\n|---|---|\n| Idealized gain (both sat., λ=0) | $A_v=-g_{m1}R_D$ (independent of M₂) |\n| Node X gain | $v_X/v_{in}=(g_{m2}-g_{m1})/(g_{m2}+g_{mb2})$ |\n| $R_{out}$ | $R_D\\|[r_{o1}+r_{o2}+(g_{m2}+g_{mb2})r_{o1}r_{o2}]$ |\n| Input impedance | ∞ at dc (gate); $C_{in}\\approx C_{gs1}+C_{gs2}+$ Miller terms |\n| Actual bias | M₁ in triode, M₂ in saturation → degenerated CS stage, lower gain |\n\n**Bottom line:** stacking a second transistor whose gate is also driven by $V_{in}$ buys nothing in gain (ideally $-g_{m1}R_D$, the same as M₁ alone) while costing one $V_{DS}$ of headroom; in practice the bottom device is pushed into triode and the stage degenerates into a source‑degenerated amplifier with *reduced* gain.",
        "format": "markdown",
        "sha256": "d5b3ecc17c487f1b3b3f75dc85d1c24d11318aa8a3181b2b566589e4b7ede590"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate series pair and that M1 is triode while M2 is saturated. However, it misses the central conclusion that the pair behaves approximately like one NMOS with effective channel length L1 + L2, instead framing it as a source-degenerated common-source stage and using a cascode-style output-resistance expression.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1529,
        "output_tokens": 8939,
        "total_tokens": 10468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7113,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1529,
        "output_tokens": 8939,
        "total_tokens": 10468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7113,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit really is\n\n* M₁ and M₂ are **both NMOS, stacked in series**, and **both gates are tied to V_in**.\n* It *looks* like a cascode, but it isn't: the gate of M₂ is **not** an ac ground, so M₂ is not a common‑gate buffer.\n* Equivalent view: M₁ (bottom) is a voltage‑controlled resistor that degenerates M₂, while M₂ is a common‑source device with R_D as load. Call the intermediate node **X** (source of M₂ / drain of M₁).\n\nNotation: $k_i=\\mu_nC_{ox}(W/L)_i$, $V_{ov}=V_{in}-V_{TH}$.\n\n## 2. Region of operation (important first step)\n\n**Claim: M₁ must be in the triode region, M₂ in saturation.**\n\nAssume M₁ were saturated: $V_X \\ge V_{GS1}-V_{TH}=V_{in}-V_{TH}$.\nThen $V_{GS2}=V_{in}-V_X \\le V_{TH}$ → **M₂ is off** → no current → $V_X\\to 0$, contradicting the assumption. (Including body effect, $V_{TH2}>V_{TH1}$, makes the contradiction even stronger.)\n\nSo, whenever current flows ($V_{in}>V_{TH}$):\n\n$$V_X<V_{in}-V_{TH}\\ \\Rightarrow\\ \\text{M}_1\\ \\text{in triode},\\qquad \\text{M}_2\\ \\text{in saturation if } V_{out}\\ge V_{in}-V_{TH}.$$\n\n## 3. Bias point (closed form)\n\n$$k_1\\!\\left[V_{ov}V_X-\\tfrac{V_X^2}{2}\\right]=\\frac{k_2}{2}\\left(V_{ov}-V_X\\right)^2$$\n\n$$\\boxed{V_X=(V_{in}-V_{TH})\\left[1-\\sqrt{\\tfrac{k_1}{k_1+k_2}}\\right]},\\qquad \n\\boxed{I_D=\\frac{1}{2}\\frac{k_1k_2}{k_1+k_2}(V_{in}-V_{TH})^2}$$\n\nSo the series pair behaves **exactly like one saturated transistor** with\n\n$$\\left(\\frac{L}{W}\\right)_{eq}=\\left(\\frac{L}{W}\\right)_1+\\left(\\frac{L}{W}\\right)_2$$\n\n(i.e. two equal devices in series ≡ one device of double the length).\n\n## 4. Small‑signal gain\n\nModel: M₁ → $g_{m1}=k_1V_X$, $g_{ds1}=k_1(V_{ov}-V_X)=1/r_{on1}$; M₂ → $g_{m2}=k_2(V_{ov}-V_X)$.\n\nKCL at node X ( $g_{m2}(v_{in}-v_x)=g_{m1}v_{in}+g_{ds1}v_x$ ):\n\n$$\\frac{v_x}{v_{in}}=\\frac{g_{m2}-g_{m1}}{g_{m2}+g_{ds1}}\\qquad(\\text{node X partially follows } v_{in})$$\n\n$$v_{out}=-R_Dg_{m2}(v_{in}-v_x)\\ \\Rightarrow\\ \n\\boxed{A_v=-\\,g_{m2}R_D\\,\\frac{g_{m1}+g_{ds1}}{g_{m2}+g_{ds1}}\n=-g_{m2}R_D\\frac{1+g_{m1}r_{on1}}{1+g_{m2}r_{on1}}}$$\n\nSince $g_{m1}+g_{ds1}=k_1(V_{in}-V_{TH})$, this collapses to the same answer as the large‑signal route:\n\n$$A_v=-G_mR_D=-\\frac{k_1k_2}{k_1+k_2}(V_{in}-V_{TH})R_D=-\\mu_nC_{ox}\\!\\left(\\frac{W}{L}\\right)_{eq}\\!(V_{in}-V_{TH})R_D=-\\sqrt{2\\mu_nC_{ox}(W/L)_{eq}I_D}\\;R_D$$\n\nUseful limits/refinements:\n\n* **Deep triode M₁** ($g_{m1}\\!\\approx\\!0$, i.e. $k_1\\gg k_2$): $A_v\\to -g_{m2}R_D/(1+g_{m2}r_{on1})$ — the familiar degenerated CS stage.\n* Compared with M₂ alone: gain is reduced by the factor $k_1/(k_1+k_2)$ (exactly ½ for identical devices).\n* With body effect on M₂: $A_v=-R_D\\dfrac{g_{m2}g_{ds1}+g_{m1}(g_{m2}+g_{mb2})}{g_{m2}+g_{mb2}+g_{ds1}}$.\n* With channel‑length modulation: $A_v=-G_m\\big(R_D\\,\\|\\,[r_{o2}+(1+(g_{m2}+g_{mb2})r_{o2})r_{on1}]\\big)$.\n\n**Validity:** $V_{in}>V_{TH}$ and $V_{out}=V_{DD}-I_DR_D\\ge V_{in}-V_{TH}$; if V_out falls below that, M₂ also enters triode and the gain collapses.\n\n## 5. Numerical check\n\n$\\mu_nC_{ox}=100\\ \\mu A/V^2$, $(W/L)_{1,2}=20$, $V_{TH}=0.5$ V, $V_{in}=1$ V, $R_D=2$ kΩ, $V_{DD}=1.8$ V:\n\n$k_{1,2}=2$ mA/V², $k_{eq}=1$ mA/V², $I_D=125\\ \\mu$A, $V_X=0.146$ V, $V_{out}=1.55$ V ( > 0.5 V ✓).\n$g_{m2}=0.707$ mS, $g_{m1}=0.293$ mS, $r_{on1}=1.41$ kΩ → $G_m=0.5$ mS → **A_v ≈ −1**.\n\n## 6. Bottom line\n\n* M₁ is forced into **triode**, M₂ into **saturation**; node X rides up with V_in by the factor $1-\\sqrt{k_1/(k_1+k_2)}$.\n* The stack is electrically identical to **one longer NMOS** with $(L/W)_{eq}=(L/W)_1+(L/W)_2$, giving\n $A_v=-\\mu_nC_{ox}(W/L)_{eq}(V_{in}-V_{TH})R_D$.\n* Hence this topology gives **no cascode benefit** — it only lowers g_m (and raises input capacitance $\\approx C_{gs1}+C_{gs2}$), so it is a *worse* CS stage than using M₂ alone.",
        "format": "markdown",
        "sha256": "9f511410f37a49827068c98623573df3658c5084c36aabf2f2d09c8f4770f1f1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the common-gate series NMOS pair, places M1 in triode and M2 in saturation, and derives the key result that their effective L/W is (L/W)1 + (L/W)2. This matches the golden solution’s full-credit criterion; the extra analysis does not undermine the central conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1529,
        "output_tokens": 10103,
        "total_tokens": 11632,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7719,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1529,
        "output_tokens": 10103,
        "total_tokens": 11632,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7719,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit actually is\n\nLook at the connections:\n\n| Device | Gate | Source | Drain |\n|---|---|---|---|\n| **M₁** | V_in | node **X** (tail node) | V_DD (ac ground) |\n| **M₂** | V_b (ac ground) | node **X** | V_out (through R_D) |\n\nBoth sources sit on the same node X, which is biased by the tail source I₁.\n\nSo this is **a differential pair (M₁–M₂) with one input driven (V_in), the other held at a dc bias V_b, and a single‑ended output taken at M₂'s drain.**\n\nEquivalently (and more useful for analysis): **M₁ is a source follower that drives the source of the common‑gate stage M₂.** The output is therefore **non‑inverting**.\n\n---\n\n## 2. Bias point (large signal)\n\nSince I₁ is the only path to ground,\n\n$$I_{D1}+I_{D2}=I_1,\\qquad V_{out}=V_{DD}-R_D I_{D2}$$\n\nwith (square law, matched devices)\n\n$$I_{D1,2}=\\tfrac12\\mu_nC_{ox}\\frac{W}{L}\\,(V_{G1,2}-V_X-V_{TH})^2 ,\\qquad V_X = V_{in}-V_{GS1}$$\n\ngiving the familiar diff‑pair result\n\n$$I_{D2}=\\frac{I_1}{2}-\\frac{\\mu_nC_{ox}\\frac{W}{L}}{4}(V_{in}-V_b)\\sqrt{\\frac{4I_1}{\\mu_nC_{ox}\\frac{W}{L}}-(V_{in}-V_b)^2}$$\n\n**V_out rises as V_in rises → non‑inverting.** The pair fully steers when $|V_{in}-V_b|\\ge\\sqrt{2I_1/(\\mu_nC_{ox}W/L)}$.\n\n**Saturation conditions**\n\n* M₁: $V_{DD}-V_X\\ge V_{GS1}-V_{TH1}\\;\\Rightarrow\\;V_{in}\\le V_{DD}+V_{TH1}$ (essentially always true – M₁'s drain is at V_DD).\n* M₂: $V_{out}\\ge V_b-V_{TH2}$, i.e. $V_{DD}-R_DI_{D2}\\ge V_b-V_{TH2}$ ← **this sets the max allowed R_D·I_D2**.\n\n---\n\n## 3. Small‑signal gain (λ = γ = 0)\n\nNote that **no ac current flows into the ideal tail source**, so whatever current leaves M₁'s source must enter M₂'s source:\n\n$$g_{m1}(v_{in}-v_X)=g_{m2}v_X \\;\\Rightarrow\\; v_X=\\frac{g_{m1}}{g_{m1}+g_{m2}}v_{in}$$\n\n$$v_{out}=+g_{m2}R_D\\,v_X$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}}=\\frac{R_D}{\\dfrac{1}{g_{m1}}+\\dfrac{1}{g_{m2}}}}$$\n\nInterpretation: the follower's output resistance $1/g_{m1}$ forms a divider with the common‑gate input resistance $1/g_{m2}$; the CG stage then provides $g_{m2}R_D$.\n\n**Matched devices:** $A_v=+g_mR_D/2$ — exactly the single‑ended gain of a differential pair, i.e. **half** the gain of a simple CS stage with the same R_D, but **positive**.\n\n---\n\n## 4. Including body effect (M₁, M₂ sources are not at ground)\n\n$$v_X=\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{m2}+g_{mb2}}v_{in},\\qquad \nA_v=\\frac{g_{m1}(g_{m2}+g_{mb2})R_D}{g_{m1}+g_{mb1}+g_{m2}+g_{mb2}}$$\n\n---\n\n## 5. Exact result with channel‑length modulation\n\nKCL at X and at the output (v_in ≠ 0, tail = open):\n\n$$v_{out}=v_X\\,\\frac{(1+g_{m2}r_{O2})R_D}{R_D+r_{O2}},\\qquad \ng_{m1}v_{in}=v_X\\!\\left[g_{m1}+\\frac{1}{r_{O1}}+\\frac{1+g_{m2}r_{O2}}{R_D+r_{O2}}\\right]$$\n\n$$A_v=\\frac{g_{m1}\\dfrac{(1+g_{m2}r_{O2})R_D}{R_D+r_{O2}}}{g_{m1}+\\dfrac{1}{r_{O1}}+\\dfrac{1+g_{m2}r_{O2}}{R_D+r_{O2}}}\\;\\xrightarrow[r_O\\to\\infty]{}\\;\\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}}$$\n\n---\n\n## 6. Impedances\n\n* **Input:** $R_{in}=\\infty$ (pure gate).\n* **Output:** with $v_{in}=0$, M₁ looks like a resistor $R_X=\\dfrac{1}{g_{m1}+g_{mb1}}\\|r_{O1}$ at node X, and M₂ is a cascode‑type device above it:\n\n$$R_{out}=R_D\\,\\big\\|\\,\\big[r_{O2}+R_X+(g_{m2}+g_{mb2})r_{O2}R_X\\big]\\;\\approx\\;R_D\\ \\ (\\text{since }R_D\\ll r_{O2})$$\n\n---\n\n## 7. Why one would use this stage\n\n* **Non‑inverting** voltage gain with an infinite input resistance.\n* **No Miller effect at the input:** M₁'s drain is tied to V_DD, so $C_{GD1}$ sees no gain; the input node only sees $C_{GD1}+C_{GS1}\\!\\left(1-\\frac{g_{m1}}{g_{m1}+g_{m2}}\\right)$ → **wideband** behaviour. The output pole is simply $1/(R_DC_{out})$ and node X is a low‑impedance ($\\approx 1/(g_{m1}+g_{m2})$) node.\n* It also **level‑shifts** (V_X = V_in − V_GS1).\n* Price paid: the gain is only $\\sim g_mR_D/2$ (the follower loses half the signal into the CG input), and it consumes I₁ with only half of it flowing in R_D.\n\n**Numerical check:** I₁ = 1 mA (0.5 mA each), g_m1 = g_m2 = 2 mS, R_D = 2 kΩ →\nA_v = 2 kΩ/(500 Ω + 500 Ω) = **+2**, V_out(dc) = V_DD − 1 V, and V_b must satisfy V_b ≤ V_out + V_TH2.",
        "format": "markdown",
        "sha256": "7b632778d9e21c37ea8e14e51ba1bd1ceb7a4ba211090ea9fca43eea4e3af243"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as both a source follower driving a common-gate stage and a source-coupled differential pair, and gives the correct non-inverting gain. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2475,
        "output_tokens": 7212,
        "total_tokens": 9687,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2475,
        "output_tokens": 7212,
        "total_tokens": 9687,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n* **M₁** has its drain tied directly to V_DD, its gate at the input, and its source at the tail node **X** → it works as a **source follower**.\n* **M₂** has its gate at a *dc* bias V_b (an ac ground), its source at node **X**, and its drain loaded by R_D → it works as a **common‑gate stage**.\n* The tail current source I₁ sets the total bias current.\n\nSo the circuit is a **source follower cascaded with a common‑gate stage** – equivalently, a **differential pair driven single‑endedly** (V_in on one gate, V_b on the other) with a single‑ended output taken at the drain of M₂. The gain is therefore **non‑inverting**.\n\n## 2. Bias point\n\nM₁ and M₂ share the tail current:\n\n$$I_{D1}+I_{D2}=I_1 ,\\qquad V_{out}=V_{DD}-I_{D2}R_D$$\n\nThe split between I_D1 and I_D2 is set by (V_in – V_b) exactly as in a differential pair. Required conditions:\n\n* M₁ in saturation: V_DD ≥ V_in – V_TH1 (essentially always true, since its drain is at V_DD).\n* M₂ in saturation: V_out ≥ V_b – V_TH2 → limits how large I_D2R_D can be.\n\n## 3. Small‑signal gain (λ = 0, with body effect)\n\nSince the tail source is ideal, the ac current that M₁ delivers into node X must flow out through M₂’s source, i.e. **the two devices carry the same signal current**.\n\nKCL at node X (v_X), with G_m2 ≡ g_m2+g_mb2:\n\n$$g_{m1}(v_{in}-v_X)-g_{mb1}v_X-G_{m2}v_X=0\\;\\Rightarrow\\;v_X=\\frac{g_{m1}}{g_{m1}+g_{mb1}+G_{m2}}\\,v_{in}$$\n\n$$v_{out}=+G_{m2}R_D\\,v_X$$\n\n$$\\boxed{\\;A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}\\,(g_{m2}+g_{mb2})}{g_{m1}+g_{mb1}+g_{m2}+g_{mb2}}\\;R_D\\;}$$\n\nNeglecting body effect:\n\n$$A_v=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D =\\big(g_{m1}\\!\\parallel\\! g_{m2}\\big)R_D$$\n\nand for identical devices (g_m1 = g_m2 = g_m):\n\n$$A_v=\\frac{g_mR_D}{2}$$\n\ni.e. exactly the half‑circuit result of a differential pair. **Note the gain is positive and half that of a common‑source stage with the same g_m and R_D** – the price paid for the non‑inverting, Miller‑free topology.\n\n*Interpretation:* M₁ is a follower whose output resistance 1/(g_m1+g_mb1) drives the input resistance 1/G_m2 of the common‑gate device — a resistive divider, hence the loss of a factor of two.\n\n## 4. Including channel‑length modulation\n\nWith G₁ ≡ g_m1+g_mb1+1/r_O1 and A ≡ (G_m2 r_O2+1)R_D/(R_D+r_O2):\n\n$$v_{out}=A\\,v_X,\\qquad v_X=\\frac{g_{m1}}{G_1+A/R_D}v_{in}\\;\\Rightarrow\\;A_v=\\frac{g_{m1}A}{G_1+A/R_D}$$\n\nwhich reduces to the previous result as r_O → ∞.\n\n## 5. Impedances\n\n* **Input:** looks into a gate → R_in = ∞ (capacitive only).\n* **Node X:** R_X = 1/(g_m1+g_mb1) ∥ 1/(g_m2+g_mb2) — very low.\n* **Output:** \n$$R_{out}=R_D\\;\\big\\|\\;\\Big[r_{O2}+\\big(1+(g_{m2}+g_{mb2})r_{O2}\\big)\\big(r_{O1}\\!\\parallel\\!\\tfrac{1}{g_{m1}+g_{mb1}}\\big)\\Big]\\approx R_D$$\n\n## 6. Frequency response (why one uses this stage)\n\n* C_GD1 is tied from the input to V_DD (ac ground) and C_GS1 sees only the follower’s small gain‑to‑source — **no Miller multiplication at the input**, so C_in ≈ C_GD1 + C_GS1[1 – g_m1/(g_m1+g_mb1+G_m2)].\n* The pole at X is at 1/(R_X C_X) with R_X very small → very high frequency.\n* The dominant pole is simply at the output: ω_p ≈ 1/[(R_D∥R_out)(C_DB2+C_GD2+C_L)].\n\nHence this configuration gives a **wideband, non‑inverting amplifier**, at the cost of ~6 dB less gain and the extra headroom/noise of the tail current source.",
        "format": "markdown",
        "sha256": "ff57efa95bae3e22c3620ecd351ed317989b490e2a9d8cdd4143f59ef42ec6e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower/common-gate topology (equivalently, a source-coupled pair) and gives the non-inverting gain consistent with the golden solution.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2475,
        "output_tokens": 4928,
        "total_tokens": 7403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2475,
        "output_tokens": 4928,
        "total_tokens": 7403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Recognizing the topology\n\n* **M₁** has its **drain tied to V_DD** (AC ground) and its gate driven by V_in → it works as a **source follower**.\n* **M₂** has its gate tied to the DC bias **V_b** (AC ground), its source at the same node X, and its drain loaded by **R_D** → it works as a **common‑gate stage**.\n* The tail current source **I₁** sets the total bias current: $I_{D1}+I_{D2}=I_1$.\n\nSo the signal path is **SF → CG**, i.e. this is nothing but a **differential pair driven single‑endedly (V_in on one gate, V_b on the other), with the single‑ended output taken from the M₂ branch.** Since both a follower and a common‑gate stage are non‑inverting, **the overall gain is positive (non‑inverting amplifier).**\n\n## 2. Bias / headroom\n\n$$V_X = V_{in}-V_{GS1},\\qquad V_{out}=V_{DD}-I_{D2}R_D$$\n\n* M₁ in saturation: $V_{DD}-V_X \\ge V_{in}-V_X-V_{TH}\\Rightarrow V_{DD}\\ge V_{in}-V_{TH}$ (essentially always true – a follower is hard to push out of saturation).\n* M₂ in saturation: $V_{out}\\ge V_b-V_{TH}$, i.e. $V_{DD}-I_{D2}R_D \\ge V_b - V_{TH}$ → this sets the limit on $R_D$.\n* The split of I₁ between M₁ and M₂ is controlled by $V_{in}-V_b$ exactly as in a differential pair.\n\n## 3. Small‑signal gain (λ = 0)\n\nWith the tail source ideal, no signal current flows into I₁, so the drain current of M₁ must equal the (negative of the) source current of M₂. Writing KCL at node X (body effect included, $g_{mb}$ terms because the sources move):\n\n$$g_{m1}(v_{in}-v_X)-g_{mb1}v_X-(g_{m2}+g_{mb2})v_X=0$$\n\n$$\\boxed{v_X=\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{m2}+g_{mb2}}\\,v_{in}}$$\n\nThe current drawn through R_D is $(g_{m2}+g_{mb2})v_X$ **out of** the output node is reversed in sign (M₂ *releases* current as V_X falls), giving\n\n$$v_{out}=+(g_{m2}+g_{mb2})R_D\\,v_X$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}\\,(g_{m2}+g_{mb2})\\,R_D}{g_{m1}+g_{mb1}+g_{m2}+g_{mb2}}}$$\n\n**Neglecting body effect:**\n\n$$A_v=\\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}} = \\big(g_{m1}\\!\\parallel\\!g_{m2}\\big)R_D$$\n\nand if the devices are identical ($g_{m1}=g_{m2}=g_m$, each carrying I₁/2):\n\n$$A_v=\\tfrac{1}{2}g_mR_D$$\n\nwhich is exactly the half‑circuit result for a differential pair with a single‑ended output. Interpretation: the follower presents a source resistance $1/g_{m1}$ to the common‑gate stage, so the gain is $\\dfrac{R_D}{1/g_{m2}+1/g_{m1}}$ — i.e. a *degenerated* CG stage.\n\n**Exact expression (with r_o's):**\n\n$$A_v=\\frac{g_{m1}}{\\dfrac{1}{R_D}+\\left(g_{m1}+g_{mb1}+\\dfrac{1}{r_{O1}}\\right)\\dfrac{\\dfrac{1}{r_{O2}}+\\dfrac{1}{R_D}}{g_{m2}+g_{mb2}+\\dfrac{1}{r_{O2}}}}$$\n\nwhich reduces to the boxed result as $r_O\\to\\infty$.\n\n## 4. Port impedances\n\n* **Input:** $R_{in}=\\infty$ (pure gate) – a big advantage over a common‑gate input.\n* **Looking into M₁’s source (the load seen by the CG stage):** $\\;1/(g_{m1}+g_{mb1})$.\n* **Output:**\n$$R_{out}=R_D\\;\\big\\|\\;\\Big[r_{O2}+\\big(1+(g_{m2}+g_{mb2})r_{O2}\\big)\\big(r_{O1}\\!\\parallel\\!\\tfrac{1}{g_{m1}+g_{mb1}}\\big)\\Big]\\approx R_D$$\n(the cascode‑like resistance looking into M₂’s drain is ≫ R_D).\n\n## 5. Comments / trade‑offs\n\n* **Gain** is only ~½ that of a simple CS stage with the same $g_m R_D$ — the price paid for the follower in front.\n* **Benefits:** non‑inverting, infinite input resistance, **no Miller multiplication** at the input (M₁’s drain is at AC ground and M₂’s gate is grounded), so the bandwidth is large; the input node sees only $C_{GS1}+C_{GD1}$.\n* The DC level at X is shifted down by $V_{GS1}$, which can be used as a **level shifter**.\n* Body effect of M₁ and M₂ (if the bulks are grounded) *reduces* $v_X$ but *increases* M₂’s transconductance to the output; net effect: the gain becomes $g_{m1}(g_{m2}+g_{mb2})R_D/\\big(\\sum g\\big)$, slightly less than $\\frac12 g_mR_D$ for symmetric devices.\n\n**Numerical check:** with $I_1=1$ mA split equally, $g_{m1}=g_{m2}=2$ mA/V, $R_D=2$ kΩ → $A_v=+\\,(2\\text{m}\\parallel2\\text{m})(2k)=+2$ (≈ 6 dB), and $V_{out,DC}=V_{DD}-(0.5\\text{mA})(2k)=V_{DD}-1$ V.",
        "format": "markdown",
        "sha256": "ab21cd2c93ead7991b7e0392c0cd6dfeff3b6fda6ff9fe1c72b4c4c971a9ea40"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower-to-common-gate topology (equivalently, the source-coupled pair with M2 biased at Vb and output at its drain) and gives the correct non-inverting gain direction.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2475,
        "output_tokens": 5799,
        "total_tokens": 8274,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3635,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2475,
        "output_tokens": 5799,
        "total_tokens": 8274,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3635,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the problem\n\n$M_2$ is just a current source (bias), so for the small‑signal output impedance we only need $M_1$ — a source follower whose **gate is driven through a finite source resistance $R_S$**. Neglect $r_O$, body effect and $C_{GD}$ for the moment and keep only $C_{GS}$.\n\nApply a test voltage $V_X$ at the output (the source of $M_1$) and let $V_G$ be the gate voltage (the input $V_{in}$ is an a.c. ground):\n\n**Gate node:** the current that $C_{GS}$ injects into the gate must flow through $R_S$:\n\n$$(V_X-V_G)sC_{GS}R_S=V_G\\;\\Rightarrow\\;V_G=V_X\\frac{sR_SC_{GS}}{1+sR_SC_{GS}}$$\n\n$$\\Rightarrow\\quad V_{GS}=V_G-V_X=\\frac{-V_X}{1+sR_SC_{GS}}$$\n\n**Output node:** the test source must supply the channel current plus the $C_{GS}$ current:\n\n$$I_X=-g_mV_{GS}+(V_X-V_G)sC_{GS}=V_X\\,\\frac{g_m+sC_{GS}}{1+sR_SC_{GS}}$$\n\n$$\\boxed{\\;Z_{out}=\\frac{1+sR_SC_{GS}}{g_m+sC_{GS}}=\\frac{1}{g_m}\\cdot\\frac{1+sR_SC_{GS}}{1+sC_{GS}/g_m}\\;}$$\n\n## Why this is inductive\n\nThe expression has a **zero at $\\omega_z=1/(R_SC_{GS})$ and a pole at $\\omega_p=g_m/C_{GS}$**, with\n\n$$|Z_{out}|\\big|_{\\omega\\to0}=\\frac{1}{g_m},\\qquad |Z_{out}|\\big|_{\\omega\\to\\infty}=R_S .$$\n\nIf $R_S>1/g_m$ (i.e. $g_mR_S>1$), the zero comes **before** the pole, so between $\\omega_z$ and $\\omega_p$ the magnitude *rises* at $+20$ dB/dec and the phase of $Z_{out}$ is **positive** — exactly the signature of an inductance.\n\nIndeed, expanding the admittance in partial fractions gives an exact equivalent network: $R_S$ in parallel with a series $R$–$L$ branch,\n\n$$Y_{out}=\\frac{1}{R_S}+\\frac{1}{R_1+sL},\\qquad \nR_1=\\frac{R_S}{g_mR_S-1}\\;\\xrightarrow[g_mR_S\\gg1]{}\\;\\frac{1}{g_m},\\qquad \nL=\\frac{R_S^2C_{GS}}{g_mR_S-1}\\;\\xrightarrow[g_mR_S\\gg1]{}\\;\\frac{R_SC_{GS}}{g_m}$$\n\nNote $L>0$ only if $g_mR_S>1$; for $R_S<1/g_m$ the \"inductance\" becomes negative and the output looks capacitive.\n\n## Intuitive picture\n\n* **At low frequency** the gate is firmly tied to the (a.c. ground) input through $R_S$. A rise of the source voltage therefore produces a full $-V_{GS}$, the transistor reacts with $-g_mV_{GS}$, and this local (series–series) feedback makes the impedance small: $1/g_m$.\n* **At high frequency** $C_{GS}$ shorts the gate to the source, so the gate *follows* the source: $V_{GS}\\to0$. The transconductance feedback disappears, and the test source now only sees $C_{GS}$ in series with $R_S$ → the impedance tends to $R_S$.\n* Thus the impedance **grows with frequency**, from $1/g_m$ to $R_S$, which is precisely inductive behaviour. (With body effect the low‑frequency value is $1/(g_m+g_{mb})$, so the condition becomes $R_S>1/(g_m+g_{mb})$.)\n\n## Why it matters\n\nBecause the follower output looks like $R$ in series with $L\\approx R_SC_{GS}/g_m$, any capacitance at $V_{out}$ (the load, plus $C_{DB}+C_{GS}$ of $M_2$) forms an $RLC$ tank. With little damping this causes peaking in the frequency response, ringing in the step response, and — if the follower drives a capacitive load from a high‑impedance source — even potential oscillation. This is why source followers driving large capacitive loads are often damped with a series resistor or a limited $R_S$.",
        "format": "markdown",
        "sha256": "f6b40840a5a78f60bac409c72b69e5cf30aee77151703de1e2cc8e7aef8cd0f8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the output impedance. It explains the transition from about 1/gm at low frequency to RS at high frequency as CGS shorts gate to source, and correctly states that the impedance rises and is inductive when RS > 1/gm.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1718,
        "output_tokens": 5004,
        "total_tokens": 6722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3404,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1718,
        "output_tokens": 5004,
        "total_tokens": 6722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3404,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## The circuit\n\nM₁ is a **source follower** (M₂, biased at a fixed V_b, is just a current‑source load whose r_O2 appears in parallel and can be ignored), and its gate is driven through a finite source resistance R_S. The output node is the source of M₁.\n\n## Calculating Z_out\n\nApply a test voltage V_X at the output (source) and let V₁ be the gate voltage. Since V_in is an a.c. ground, C_GS and R_S form a divider from the output back to the gate:\n\n$$V_1=V_X\\,\\frac{sR_SC_{GS}}{1+sR_SC_{GS}}\\qquad\\Rightarrow\\qquad V_X-V_1=\\frac{V_X}{1+sR_SC_{GS}}$$\n\nKCL at the output node (current through C_GS plus the drain current g_m v_GS, with v_GS = V₁ – V_X):\n\n$$I_X=(V_X-V_1)\\big(g_m+sC_{GS}\\big)$$\n\n$$\\boxed{\\;Z_{out}=\\frac{V_X}{I_X}=\\frac{1+R_SC_{GS}\\,s}{g_m+C_{GS}\\,s}\\;}$$\n\n(with body effect, replace g_m by g_m + g_mb.)\n\n## Why this is inductive\n\nThe impedance has a zero at ω_z = 1/(R_S C_GS) and a pole at ω_p = g_m/C_GS, and\n\n$$Z_{out}(0)=\\frac{1}{g_m},\\qquad Z_{out}(\\infty)=R_S$$\n\nIf **R_S > 1/g_m**, then ω_z < ω_p, i.e. the zero comes first: |Z_out| *rises* with frequency from 1/g_m up to R_S, and the phase\n\n$$\\angle Z_{out}=\\tan^{-1}(\\omega R_SC_{GS})-\\tan^{-1}(\\omega C_{GS}/g_m)>0$$\n\nis **positive** — exactly the signature of an inductive impedance. (If R_S < 1/g_m the behaviour is capacitive instead.)\n\nAn equivalent two‑terminal network reproducing this Z_out is a resistor R_S in parallel with a series R–L branch:\n\n$$R_1=\\frac{R_S}{g_mR_S-1},\\qquad L=\\frac{C_{GS}R_S^{\\,2}}{g_mR_S-1}\\;\\;\\Big(\\approx \\frac{R_SC_{GS}}{g_m}\\ \\text{for }g_mR_S\\gg1\\Big)$$\n\n## Physical interpretation\n\nA follower has a low output resistance (1/g_m) because the transistor *opposes* any change of its source voltage: if V_out rises, v_GS drops and the drain current falls, pulling the node back — a local negative feedback whose \"sensing\" element is the gate–source voltage.\n\n* At low frequencies the gate is held firmly at the a.c. ground by R_S, so the full change of V_out appears as a change of v_GS and the feedback is strong → Z_out = 1/g_m.\n* At high frequencies C_GS couples the source (output) node to the gate, and because the gate is not a stiff node (it sees R_S), the gate voltage is dragged along with the output. v_GS therefore changes less, the transistor's corrective current is weaker, and the node looks more resistive‑high (→ R_S).\n\nThus the R_S–C_GS network introduces a lag that *progressively disables* the feedback, so the impedance grows with frequency — which a passive network can only do if it contains inductance.\n\n**Consequence:** this inductive output impedance resonates with any capacitive load at the output, which is why source followers driving large load capacitances from a high source resistance show ringing/peaking in their step and frequency responses and can even oscillate.",
        "format": "markdown",
        "sha256": "7a938fbe5cabe60261a0b8ddbf3652ef9d85b8eb94572ef313c011caf7f6fe64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives Z_out and explains that C_GS makes the gate follow the source at high frequency, moving Z_out from about 1/g_m to R_S. It correctly states that the impedance rises and is inductive when R_S > 1/g_m, matching the full-credit rule.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1718,
        "output_tokens": 4195,
        "total_tokens": 5913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1718,
        "output_tokens": 4195,
        "total_tokens": 5913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## The circuit\n\nM₁ is a **source follower** whose gate is driven through the source resistance $R_S$; M₂ (gate at a dc bias $V_b$) is just a current‑source load, so it contributes only the large resistance $r_{O2}$ in parallel with the follower's output. The interesting part is therefore the impedance seen looking **into the source of M₁**.\n\n## Small‑signal derivation\n\nNeglect body effect and channel‑length modulation, and keep only $C_{GS}$. Apply a test voltage $V_X$ at the output (the source) and note that $V_{in}$ is an ac ground, so the gate is tied to ground through $R_S$.\n\nGate node (current through $C_{GS}$ must flow through $R_S$):\n\n$$(V_X-V_G)\\,sC_{GS}=\\frac{V_G}{R_S}\\;\\Rightarrow\\;V_G=\\frac{sR_SC_{GS}}{1+sR_SC_{GS}}V_X\n\\;\\Rightarrow\\;V_{GS}=V_G-V_X=\\frac{-V_X}{1+sR_SC_{GS}}$$\n\nCurrent drawn from the test source (through $C_{GS}$ plus the controlled current):\n\n$$I_X=(V_X-V_G)sC_{GS}-g_mV_{GS}=\\frac{(g_m+sC_{GS})V_X}{1+sR_SC_{GS}}$$\n\n$$\\boxed{\\,Z_{out}=\\frac{1+R_SC_{GS}\\,s}{g_m+C_{GS}\\,s}\\,}$$\n\n(with $r_{O2}$ of M₂ in parallel, which is large and can be ignored.)\n\n## Why this looks like an inductor\n\n* **Zero** at $\\omega_z=1/(R_SC_{GS})$, **pole** at $\\omega_p=g_m/C_{GS}$.\n* $|Z_{out}|\\to 1/g_m$ at low frequency and $\\to R_S$ at high frequency.\n\nIf $R_S>1/g_m$ (i.e. $g_mR_S>1$), the zero occurs **before** the pole, so between $\\omega_z$ and $\\omega_p$ the magnitude of $Z_{out}$ *rises* with frequency and its phase is *positive* — exactly the behaviour of a resistor in series with an inductor. Indeed, for $\\omega\\ll g_m/C_{GS}$,\n\n$$Z_{out}\\approx\\frac{1}{g_m}\\bigl(1+sR_SC_{GS}\\bigr)=\\underbrace{\\frac{1}{g_m}}_{R}+s\\underbrace{\\frac{R_SC_{GS}}{g_m}}_{L_{eq}}$$\n\nso the output behaves as $R=1/g_m$ in series with $L_{eq}=R_SC_{GS}/g_m$.\n\n## Physical picture\n\n* At **low frequencies** no current flows through $R_S$; the gate is held at a fixed potential, the follower's local feedback is fully active, and the source presents the usual low impedance $1/g_m$.\n* At **high frequencies** $C_{GS}$ shorts the gate to the source, so the gate voltage follows the source; $v_{GS}\\to0$, the transconductive feedback disappears, and the test source essentially looks at $R_S$ through $C_{GS}$, i.e. $Z_{out}\\to R_S$.\n\nThus the capacitive feedback from source to gate gradually \"removes\" the $1/g_m$ clamp as frequency rises, making the impedance *increase* with frequency — the signature of an inductance.\n\n**Consequence:** if this stage drives a capacitive load, the equivalent $L_{eq}$ resonates with $C_L$ and the series resistance is small, producing peaking in the frequency response and ringing (potential instability) in the step response. This is why one keeps $R_S$ (the gate driving resistance) small, or damps it deliberately.",
        "format": "markdown",
        "sha256": "cc95a00ad803e7ab0181b65e3d45dc3f13fc54fd6c76bfaab1760d60651b814b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower, derives the impedance and its low- and high-frequency limits, and explains the inductive rise for R_S > 1/g_m. Its optional L_eq approximation omits the −C_GS/g_m² correction, but this does not affect the essential conclusion.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1718,
        "output_tokens": 4373,
        "total_tokens": 6091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3041,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1718,
        "output_tokens": 4373,
        "total_tokens": 6091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3041,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Reading the Topology\n\n* **M₁** is a simple **common‑source stage**: gate at node **X**, source grounded, drain at the output node through **R_D1**.\n* **M₂** is an NMOS whose **source is grounded, drain is tied to node X, and gate is tied to V_out**.\n* The input current **I_in** is injected into node **X**.\n\nSo M₂ closes a loop from the output back to the input node: the signal goes **X → (M₁, R_D1) → V_out → (gate of M₂) → back into node X as a drain current**. The circuit is therefore a **current‑in / voltage‑out (transimpedance) stage with shunt feedback**, and node X is the summing node.\n\n## Bias (large‑signal) analysis\n\nThe gate of M₁ draws no DC current, so **all of I_in must be absorbed by the drain of M₂**:\n\n$$I_{D2}=I_{in}\\qquad\\text{with}\\qquad V_{GS2}=V_{out}$$\n\n$$\\boxed{V_{out}=V_{TH2}+\\sqrt{\\frac{2I_{in}}{\\mu_nC_{ox}(W/L)_2}}}$$\n\nThen M₁ must carry whatever current R_D1 delivers:\n\n$$I_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}},\\qquad \nV_X=V_{GS1}=V_{TH1}+\\sqrt{\\frac{2I_{D1}}{\\mu_nC_{ox}(W/L)_1}}$$\n\nSaturation requires\n\n$$V_X\\ge V_{out}-V_{TH2}\\quad(\\text{M}_2),\\qquad V_{out}\\ge V_X-V_{TH1}\\quad(\\text{M}_1)$$\n\ni.e. the two overdrives may not differ by more than a threshold.\n\n## Small‑signal analysis\n\nLet v_x, v_out be the small‑signal node voltages.\n\n**KCL at X** (only M₂'s drain is there):\n\n$$i_{in}=g_{m2}v_{out}+\\frac{v_x}{r_{O2}}$$\n\n**KCL at the output:**\n\n$$g_{m1}v_x+v_{out}\\!\\left(\\frac1{R_{D1}}+\\frac1{r_{O1}}\\right)=0\n\\;\\Rightarrow\\; v_x=-\\frac{v_{out}}{g_{m1}(R_{D1}\\|r_{O1})}$$\n\nCombining:\n\n$$\\frac{v_{out}}{i_{in}}=\\frac{1}{\\,g_{m2}-\\dfrac{1}{g_{m1}r_{O2}(R_{D1}\\|r_{O1})}\\,}$$\n\nWith **λ = 0** (or simply because the loop gain is large) this collapses to the clean result\n\n$$\\boxed{\\dfrac{V_{out}}{I_{in}}=\\dfrac{1}{g_{m2}}=\\dfrac{1}{\\sqrt{2\\mu_nC_{ox}(W/L)_2 I_{in}}}=\\dfrac{V_{GS2}-V_{TH}}{2I_{in}}}$$\n\n**independent of g_m1 and R_D1** – exactly the derivative of the bias equation above.\n\nThe input node voltage is\n\n$$\\frac{v_x}{i_{in}}=-\\frac{1}{g_{m1}g_{m2}(R_{D1}\\|r_{O1})}\\;,$$\n\nso X is a *very low impedance* node (a \"virtual ground\"), as expected for shunt feedback; with λ = 0 the output impedance seen at V_out is driven to zero as well.\n\n## Interpretation\n\n* Feedback factor: β = i_f/v_out = g_m2; forward gain A = v_out/v_x = −g_m1(R_D1‖r_O1). Since |Aβ| ≫ 1, the closed‑loop transimpedance is set by the feedback element alone, 1/β = 1/g_m2 — M₂ behaves as if it were diode‑connected, but the feedback loop (not a physical gate–drain short) enforces it.\n* **Caution on polarity:** tracing the loop, v_X ↑ → V_out ↓ → I_D2 ↓ → v_X ↑ : the loop is **positive** feedback (equivalently, R_in at X comes out *negative*, and det A = (g_o2G_L − g_m1g_m2)/C_XC_out < 0). The operating point found above is therefore an *unstable* equilibrium; a real circuit drifts to the latched state V_out ≈ V_DD with M₂ in deep triode (V_X ≈ 0, M₁ off). To make this a usable transimpedance amplifier the feedback must be inverted — e.g. implement M₂ as a PMOS returned to V_DD, or add a second inverting stage.",
        "format": "markdown",
        "sha256": "4992059f578e29a2499bd96c308306c8b61ed6b2ece66ec721862909a1352c68"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer correctly identifies that M₂’s gate is tied to Vout, not its drain, and explicitly traces the positive-feedback loop. It also gives the correct consequences—negative input resistance, instability, and latching—meeting the golden solution’s full-credit rule despite misleading intermediate transimpedance claims.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2208,
        "output_tokens": 17445,
        "total_tokens": 19653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2208,
        "output_tokens": 17445,
        "total_tokens": 19653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1.  Reading the topology\n\n| Device | Gate | Source | Drain |\n|---|---|---|---|\n| **M₁** (NMOS) | node **X** | ground | **V_out** (= top of R_D1) |\n| **M₂** (NMOS) | **V_out** | ground | node **X** |\n\nSo the circuit is a **transimpedance (current‑in / voltage‑out) stage**:\n\n* **M₁ + R_D1** = common‑source amplifier: input at X, output at V_out, gain ≈ –g_m1R_D1.\n* **M₂** = a transconductor that senses V_out and returns a current to node X → **feedback element** (the loop is X → M₁ → V_out → M₂ → X).\n\n**Key observation:** node X is connected only to the current source, the *gate* of M₁ (no dc or low‑frequency current) and the *drain* of M₂. Therefore **all of I_in must flow into M₂'s drain.**\n\n## 2.  Large‑signal (bias) behaviour\n\n$$I_{D2}=I_{in}\\quad\\Longrightarrow\\quad V_{out}=V_{GS2}=V_{TH2}+\\sqrt{\\frac{2I_{in}}{\\mu_nC_{ox}(W/L)_2}}$$\n\nThe output voltage is forced to whatever V_GS2 makes M₂ carry I_in. M₁ and R_D1 then simply \"obey\": \n\n$$I_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}}=\\tfrac12\\mu_nC_{ox}\\Big(\\frac{W}{L}\\Big)_1 (V_X-V_{TH1})^2 \\;\\Rightarrow\\; V_X=V_{TH1}+\\sqrt{\\frac{2(V_{DD}-V_{out})}{\\mu_nC_{ox}(W/L)_1R_{D1}}}$$\n\n(Saturation requires V_out ≥ V_X – V_TH1 for M₁ and V_X ≥ V_out – V_TH2 for M₂, which is normally satisfied since V_X = V_TH1+V_OV1 and V_out = V_TH2+V_OV2.)\n\n## 3.  Small‑signal analysis\n\nWith λ = 0:\n\n* **Node X:** $i_{in}=g_{m2}v_{out}$\n* **Output node:** $\\dfrac{v_{out}}{R_{D1}}+g_{m1}v_X=0\\;\\Rightarrow\\;v_X=-\\dfrac{v_{out}}{g_{m1}R_{D1}}$\n\n$$\\boxed{\\dfrac{V_{out}}{I_{in}}=\\dfrac{1}{g_{m2}}}$$\n\nwhich is exactly dV_out/dI_in of the large‑signal result, confirming the answer.\n\n**Including channel‑length modulation** (r_o1, r_o2):\n\n$$g_{m1}v_X=-v_{out}\\Big(\\tfrac1{R_{D1}}+\\tfrac1{r_{o1}}\\Big),\\qquad i_{in}=g_{m2}v_{out}+\\frac{v_X}{r_{o2}}$$\n\n$$\\frac{V_{out}}{I_{in}}=\\cfrac{1}{\\,g_{m2}-\\cfrac{1}{g_{m1}r_{o2}\\,(R_{D1}\\|r_{o1})}\\,}\\;\\approx\\;\\frac{1}{g_{m2}}$$\n\n## 4.  Interpretation\n\n* The gain is set **only by the feedback device M₂** – it is independent of g_m1 and R_D1, exactly as in a feedback amplifier where the closed‑loop gain ≈ 1/β (here β = g_m2). M₁–R_D1 is just the high‑gain \"error amplifier\" that drives V_X to whatever value keeps I_D2 = I_in.\n* Loop gain: $T=g_{m1}g_{m2}\\,r_{o2}\\,(R_{D1}\\|r_{o1})\\gg1$, which is why V_out/I_in collapses to 1/g_m2.\n* Resistance looking into X: $v_X/i_{in}=-1/[g_{m1}g_{m2}(R_{D1}\\|r_{o1})-1/r_{o2}]$ — **negative**, because the loop (inverting CS stage + NMOS feedback) is actually **regenerative** (positive feedback). So, while the gain computation gives 1/g_m2, the bias point of this particular connection is not stable in practice; a real design would use a PMOS (or an inverting feedback path) to make the loop negative.",
        "format": "markdown",
        "sha256": "208630eeeff1c152b40a3bad4db5dae6b00b432d7447d0e4acf72c9068c916b4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₂’s gate as tied to Vout, recognizes the regenerative positive-feedback loop, and states the negative input resistance and instability. This satisfies the golden solution’s full-credit rule despite the extra misleading linear-gain discussion.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2208,
        "output_tokens": 10869,
        "total_tokens": 13077,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9311,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2208,
        "output_tokens": 10869,
        "total_tokens": 13077,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9311,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the topology\n\n* **M₁** is a common‑source stage: gate at node **X**, source grounded, drain loaded by **R_D1** → the drain *is* V_out.\n* **M₂** is the *feedback device*: its **gate is tied to V_out**, its **drain is tied to node X**, its source is grounded.\n* The signal source is a **current** I_in injected into node X.\n\nSo the output voltage is **sensed** by M₂'s gate (in parallel with the output) and is **returned as a current** into node X (in parallel with I_in). This is a **shunt–shunt (voltage‑sensing / current‑returning) loop around a transimpedance amplifier**, with feedback factor\n\n$$\\beta=\\frac{i_F}{v_{out}}=g_{m2}\\quad[\\text{A/V}]$$\n\n## 2. Bias (large‑signal) picture\n\nM₁'s gate draws no dc current, so **all of I_in must flow into M₂'s drain**:\n\n$$I_{in}=I_{D2}=\\tfrac12\\mu_nC_{ox}\\Big(\\frac{W}{L}\\Big)_2\\big(V_{out}-V_{TH}\\big)^2\n\\;\\Longrightarrow\\;V_{out}=V_{TH}+\\sqrt{\\frac{2I_{in}}{\\mu_nC_{ox}(W/L)_2}}$$\n\ni.e. **V_out is set only by I_in and M₂**. Then M₁ must supply whatever the resistor demands:\n\n$$I_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}},\\qquad V_X=V_{TH}+\\sqrt{\\frac{2I_{D1}}{\\mu_nC_{ox}(W/L)_1}}$$\n\nDifferentiating the first relation already gives $dV_{out}/dI_{in}=1/g_{m2}$.\n\n## 3. Small‑signal analysis\n\nLet $R'=R_{D1}\\|r_{O1}$.\n\n**Node X:** $\\;i_{in}=g_{m2}v_{out}+\\dfrac{v_X}{r_{O2}}$\n\n**Node out:** $\\;-\\dfrac{v_{out}}{R_{D1}}=g_{m1}v_X+\\dfrac{v_{out}}{r_{O1}}\\;\\Rightarrow\\;v_X=-\\dfrac{v_{out}}{g_{m1}R'}$\n\nSubstituting:\n\n$$\\boxed{\\;\\frac{V_{out}}{I_{in}}=\\frac{1}{g_{m2}-\\dfrac{1}{g_{m1}r_{O2}R'}}\\;\\simeq\\;\\frac{1}{g_{m2}}\\;}$$\n\n**Input resistance (at X):** $R_{in}=\\dfrac{v_X}{i_{in}}=\\dfrac{-1}{g_{m1}g_{m2}R'-1/r_{O2}}\\approx-\\dfrac{1}{g_{m1}g_{m2}R'}$\n\n**Output resistance (I_in open):** $R_{out}=\\dfrac{R'}{1-g_{m1}g_{m2}r_{O2}R'}\\approx-\\dfrac{1}{g_{m1}g_{m2}r_{O2}}$\n\nSo the transimpedance is **1/g_m2** — independent of R_D1 and g_m1: the classic signature of a large loop gain, where the closed‑loop gain equals 1/β.\n\n## 4. Polarity of the feedback — the important point\n\nTrace a disturbance around the loop:\n\n$$V_X\\uparrow\\;\\Rightarrow\\;I_{D1}\\uparrow\\;\\Rightarrow\\;V_{out}\\downarrow\\;\\Rightarrow\\;V_{GS2}\\downarrow\\;\\Rightarrow\\;I_{D2}\\downarrow$$\n\nbut since I_in is fixed, less current drawn by M₂ means the excess charges node X, so **V_X rises further** → **positive (regenerative) feedback**.\n\nFormally, breaking the loop at M₁'s gate (the current source is an open circuit):\n\n$$T=\\big(-g_{m1}R'\\big)\\big(-g_{m2}r_{O2}\\big)=+g_{m1}g_{m2}r_{O2}R'\\gg1$$\n\nEquivalently, $1+\\beta A = 1-g_{m1}g_{m2}r_{O2}R'<0$, and both $R_{in}$ and $R_{out}$ come out **negative** — all consistent with regeneration.\n\n## 5. Conclusion\n\n* Small‑signal (incremental) answer: $V_{out}/I_{in}\\approx 1/g_{m2}$, $R_{in}\\approx-1/(g_{m1}g_{m2}R_{D1})$, set entirely by the feedback device M₂.\n* However, the loop is **positive** with $|T|>1$, so this bias point is **not stable**: the circuit behaves as a latch (bistable). It will settle either with V_X low / M₁ off / V_out ≈ V_DD / M₂ on, or with V_X high / M₁ in triode / V_out low / M₂ off.\n* To make it a usable transimpedance amplifier one must invert the loop polarity — e.g. sense V_out with a PMOS feedback device (or insert an extra inverting stage) so that an increase in V_X eventually pushes V_X back down.",
        "format": "markdown",
        "sha256": "bc2a06b40ef49ff925f72749a59c49f202f39d128a18de2ce8409ad69f43b3ff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₂’s gate connection to Vout, the positive-feedback loop, and its negative-input-resistance and latching/instability consequences. Minor secondary details do not undermine the essential analysis.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2208,
        "output_tokens": 12398,
        "total_tokens": 14606,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10577,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2208,
        "output_tokens": 12398,
        "total_tokens": 14606,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10577,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n* **M₁** is a **common‑gate (CG) stage**: the signal current `I_in` is injected into its *source*, its gate is tied to the dc bias `V_b`, and its drain drives node *X* through `R_D1`.\n* **M₂** is a **common‑source (CS) stage** whose gate is node *X*; its drain, loaded by `R_D2`, is the output.\n* **R_F** returns a current from `V_out` back to the input (source) node.\n\nInput = current, output = voltage ⇒ the circuit is a **transimpedance amplifier (TIA)** – exactly the configuration used in optical front‑ends.\n\n## 2. Feedback topology and polarity\n\n`R_F` is connected **in parallel** with the output (it senses `V_out`, a voltage) and **in parallel** with the input (it returns a current `i_RF` that subtracts from `I_in`). This is **shunt–shunt (voltage‑sensing / current‑returning) feedback**, the proper topology for a TIA.\n\nPolarity check (λ = 0, body effect ignored):\n\n$$I_{in}\\uparrow \\;\\Rightarrow\\; V_P\\uparrow \\;\\Rightarrow\\; V_{GS1}\\downarrow \\;\\Rightarrow\\; I_{D1}\\downarrow \\;\\Rightarrow\\; V_X\\uparrow \\;\\Rightarrow\\; I_{D2}\\uparrow \\;\\Rightarrow\\; V_{out}\\downarrow$$\n\nA falling `V_out` draws current **out** of the input node through `R_F`, opposing `I_in` → **negative feedback** ✔\n\n(Note the CG stage is non‑inverting, `V_X = +g_{m1}R_{D1}V_P`, and the CS stage inverts, so the forward path is inverting – as required.)\n\n## 3. Exact small‑signal solution\n\nKCL with `V_P` (input node), `V_X`, `V_out` (λ = 0, no body effect):\n\n$$I_{in}+\\frac{V_{out}-V_P}{R_F}=g_{m1}V_P,\\qquad V_X=g_{m1}R_{D1}V_P,\\qquad \\frac{V_{out}}{R_{D2}}+g_{m2}V_X+\\frac{V_{out}-V_P}{R_F}=0$$\n\nDefining the common denominator\n\n$$\\boxed{D = 1+g_{m1}R_F+g_{m1}R_{D2}+g_{m1}g_{m2}R_{D1}R_{D2}}$$\n\n$$\\frac{V_{out}}{I_{in}}=-\\,\\frac{R_{D2}\\,(g_{m1}g_{m2}R_{D1}R_F-1)}{D},\\qquad\nR_{in}=\\frac{R_{D2}+R_F}{D},\\qquad\nR_{out}=\\frac{R_{D2}(1+g_{m1}R_F)}{D}$$\n\nFor a large loop gain (`g_{m1}g_{m2}R_{D1}R_{D2} ≫ 1`, `R_F ≫ R_{D2}`):\n\n$$\\frac{V_{out}}{I_{in}}\\;\\simeq\\;-R_F ,\\qquad R_{in}\\simeq\\frac{R_F}{(g_{m1}R_{D1})(g_{m2}R_{D2})},\\qquad R_{out}\\simeq\\frac{R_F}{g_{m2}R_{D1}}$$\n\nThe gain is set by **one resistor**, `R_F` — the hallmark of shunt–shunt feedback.\n\n## 4. Same result from feedback (two‑port) theory\n\nLoading of the feedback network: `R_F` to ground at the input and `R_F` to ground at the output.\n\n| Quantity | Open loop |\n|---|---|\n| `R_in,open` | `(1/g_{m1}) ∥ R_F = R_F/(1+g_{m1}R_F)` |\n| `A = V_out/I_in` | `−g_{m1}g_{m2}R_{D1}(R_{D2}∥R_F)·[(1/g_{m1})∥R_F]` |\n| `R_out,open` | `R_{D2} ∥ R_F` |\n| `β = i_F/V_out` | `1/R_F` |\n\n$$T=|A|\\beta=\\frac{g_{m1}g_{m2}R_{D1}\\,(R_{D2}\\!\\parallel\\!R_F)}{1+g_{m1}R_F}\\;\\xrightarrow[\\;g_{m1}R_F\\gg1\\;]{}\\;g_{m2}R_{D2}\\frac{R_{D1}}{R_F}$$\n\n$$R_{m}=\\frac{A}{1+T}\\to -R_F,\\qquad R_{in}=\\frac{(1/g_{m1})\\parallel R_F}{1+T},\\qquad R_{out}=\\frac{R_{D2}\\parallel R_F}{1+T}$$\n\nBoth input and output impedances are **divided by (1+T)**, and the bandwidth is correspondingly extended — the low `R_in` is what keeps the photodiode capacitance from limiting speed.\n\n## 5. Numerical check\n\n`g_{m1}=g_{m2}=1/50 Ω⁻¹`, `R_{D1}=R_{D2}=2 kΩ`, `R_F = 1 kΩ`:\n\n`D = 1+20+40+1600 = 1661`\n\n| | Exact | Feedback estimate |\n|---|---|---|\n| `V_out/I_in` | −962 Ω | `A/(1+T) = −25.4k/26.4 = −962 Ω` (≈ −R_F) |\n| `R_in` | 1.81 Ω | `47.6 Ω/26.4 = 1.80 Ω` (vs. 50 Ω open loop) |\n| `R_out` | 25.3 Ω | `667 Ω/26.4 = 25.3 Ω` |\n\n## 6. Remarks\n\n* **Loop gain ≈ `g_{m2}R_{D2}·(R_{D1}/R_F)`** — note it *falls* as `R_F` is raised, so you cannot get both a very large transimpedance and a very accurate `−R_F`; `R_{D1}` (the CG load) must be large.\n* The `−1` in the numerator is the **feed‑forward** of `R_F` (signal can go straight from input to output); it produces a zero and makes the gain vanish when `g_{m1}g_{m2}R_{D1}R_F = 1`, i.e. when the loop gain degenerates.\n* `R_F` also closes a **dc** loop: it sets/stabilizes the input‑node and output bias together with `V_b`.\n* Including body effect: replace `g_{m1} → g_{m1}+g_{mb1}`. Including `r_o`: replace `R_{D1} → R_{D1}∥r_{o1}`‑type loadings (the CG output resistance is `r_{o1}(1+(g_{m1}+g_{mb1})R_S)+R_S`) — the conclusions are unchanged.\n* With two gain nodes (X and output) plus the input pole, the loop is at least second order; raising `T` (small `R_F`, large `R_{D1}`) eventually degrades phase margin and causes peaking/ringing.",
        "format": "markdown",
        "sha256": "36ed7a264632fb7eacec66f8e623dbb0064478d43ff04ac76fe7e51a1853096e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a transimpedance amplifier. It also correctly describes the feedback as negative.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 15462,
        "total_tokens": 17977,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 15462,
        "total_tokens": 17977,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n* **M₁** is a **common‑gate stage** (gate at the dc bias Vb = ac ground, signal enters the *source*, output taken at the drain, node X, loaded by R_D1).\n* **M₂** is a **common‑source stage** (input at X, output at V_out, loaded by R_D2).\n* **R_F** returns a current from the output node back to the input node.\n\nSince the input is a **current** (I_in, e.g. a photodiode) and the output is a **voltage**, and R_F **senses the output voltage** and **injects a current in parallel with the input**, this is a **shunt–shunt (voltage–current) feedback transimpedance amplifier (TIA)**.\n\n**Sign check (must be negative feedback):** I_in ↑ ⇒ v_P ↑ (P = source of M₁) ⇒ v_X ↑ (CG is non‑inverting) ⇒ V_out ↓ (CS inverts). With V_out going down, R_F pulls current *out* of node P, opposing I_in → negative feedback ✔\n\n## 2. Small‑signal equations (λ = 0)\n\nLet P = input node, and because the source of M₁ is not grounded, use\n\n$$G_{m1}\\equiv g_{m1}+g_{mb1}$$\n\nKCL (all node voltages referred to ground):\n\n$$\\text{(P)}\\quad I_{in}-G_{m1}v_P+\\frac{v_{out}-v_P}{R_F}=0$$\n$$\\text{(X)}\\quad -\\frac{v_X}{R_{D1}}=-G_{m1}v_P\\;\\;\\Rightarrow\\;\\; v_X=G_{m1}R_{D1}v_P$$\n$$\\text{(out)}\\quad -\\frac{v_{out}}{R_{D2}}+\\frac{v_P-v_{out}}{R_F}-g_{m2}v_X=0$$\n\nSolving, with \n\n$$\\boxed{D\\equiv 1+G_{m1}(R_F+R_{D2})+G_{m1}g_{m2}R_{D1}R_{D2}}$$\n\n$$\\frac{V_{out}}{I_{in}}=\\frac{R_{D2}\\,\\bigl(1-G_{m1}g_{m2}R_{D1}R_F\\bigr)}{D},\\qquad\nR_{in}=\\frac{R_F+R_{D2}}{D},\\qquad\nR_{out}=\\frac{R_{D2}\\,(1+G_{m1}R_F)}{D}$$\n\n## 3. Loop gain and feedback interpretation\n\nBreaking the loop at the gate of M₂ gives the exact loop gain\n\n$$T=\\frac{g_{m2}R_{D1}R_{D2}}{R_{D2}+R_F+1/G_{m1}}=\\frac{G_{m1}g_{m2}R_{D1}R_{D2}}{1+G_{m1}R_{D2}+G_{m1}R_F}$$\n\nand the exact results above can be written in textbook feedback form:\n\n| quantity | open loop (loading of R_F included) | closed loop |\n|---|---|---|\n| R_in | $(1/G_{m1})\\|(R_F+R_{D2})$ | $R_{in,open}/(1+T)$ |\n| R_out | $R_{D2}\\|(R_F+1/G_{m1})$ | $R_{out,open}/(1+T)$ |\n| gain | $-g_{m2}R_{D1}R_{D2}$ (no R_F) | $\\dfrac{V_{out}}{I_{in}}=-R_F\\dfrac{T}{1+T}+\\dfrac{R_{D2}}{D}$ |\n\n(The last term is the small direct feed‑forward of I_in through R_F.)\n\n## 4. Useful approximations (large loop gain, R_F ≫ R_D2, G_m1R_F ≫ 1)\n\n$$\\frac{V_{out}}{I_{in}}\\simeq -R_F ,\\qquad\nR_{in}\\simeq\\frac{R_F+R_{D2}}{G_{m1}g_{m2}R_{D1}R_{D2}}=\\frac{1/G_{m1}}{1+T},\\qquad\nR_{out}\\simeq\\frac{R_F}{g_{m2}R_{D1}}=\\frac{R_{D2}}{1+T}$$\n\nInterpretation: node P becomes a **virtual ground**, essentially the whole input current flows through R_F, so V_out ≈ −I_in R_F. Note also\n\n$$\\frac{v_X}{I_{in}}\\simeq\\frac{R_F}{g_{m2}R_{D2}}\\quad(\\text{so that } -g_{m2}R_{D2}v_X=-R_FI_{in}).$$\n\nWithout feedback (R_F → ∞) the formulas collapse to the expected open‑loop values: R_in = 1/G_m1, V_out/I_in = −g_{m2}R_{D1}R_{D2}, R_out = R_{D2}.\n\n**Numerical check:** R_D1=R_D2=1 kΩ, g_m1=g_m2=5 mS, R_F=10 kΩ, g_mb=0:\nT = 5 k/11.2 k = 0.45, D = 81 ⇒ V_out/I_in = −3.07 kΩ (not −R_F!), R_in = 136 Ω, R_out = 691 Ω.\n→ To actually get V_out/I_in ≈ −R_F one needs **g_{m2}R_{D1}R_{D2} ≫ R_F**, i.e. a large forward gain.\n\n## 5. Practical remarks\n\n* **Why the CG input:** it already gives a low input resistance (1/G_m1), which feedback lowers further by (1+T). A low R_in pushes the input pole 1/(R_inC_in) (photodiode capacitance) to high frequency — the key reason for this topology.\n* **Body effect** of M₁ is unavoidable (its source is the signal node); it *helps* the input resistance but loads the loop gain (G_m1 appears in T).\n* **Bias:** V_P = V_b − V_GS1, V_X = V_DD − I_{D1}R_{D1} (must satisfy V_X ≥ V_b − V_TH1 for M₁ saturation), V_out = V_DD − I_{D2}R_{D2} ≥ V_X − V_TH2 for M₂ saturation. R_F also carries the dc current (V_out − V_P)/R_F, which adds to/subtracts from I_D1 — the dc component of I_in must be accounted for.\n* **Stability/bandwidth:** two dominant poles (nodes X and out) plus the input pole; the return factor (1+T) broadbands R_in and R_out but, as usual for a two/three‑pole loop, excessive T (large R_D’s, small R_F) produces peaking — R_F sets the gain–bandwidth–stability trade‑off.",
        "format": "markdown",
        "sha256": "1072596ce29cc9ea883891cdc0e3376a195117cd0d3a5b0cb55d91415997d0fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as the common-gate input device, M₂ as a common-source stage driven by X, and R_F as feedback from V_out to the input node forming a transimpedance amplifier. The negative-feedback sign is also correct, satisfying the full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 14340,
        "total_tokens": 16855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 14340,
        "total_tokens": 16855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n* **Input:** a current source $I_{in}$ (e.g. a photodiode) drives the **source** of $M_1$ — a low‑impedance node ($\\approx 1/g_{m1}$).\n* **Forward (core) amplifier:**\n * $M_1$ = common‑gate stage (gate at $V_b$): $v_X/v_P = +g_{m1}R_{D1}$ (non‑inverting)\n * $M_2$ = common‑source stage: $v_{out}/v_X = -g_{m2}R_{D2}$ (inverting)\n * total forward voltage gain $v_{out}/v_P = -g_{m1}R_{D1}g_{m2}R_{D2}\\equiv -A$\n* **Feedback:** $R_F$ **senses the output voltage** and **returns a current** $i_{RF}$ to the input node.\n\n⇒ This is a **shunt–shunt (voltage‑sensing, current‑returning) feedback transimpedance amplifier (TIA)**; the output quantity is $V_{out}$, the input quantity is $I_{in}$, so the closed‑loop gain has units of ohms.\n\n**Polarity check:** $I_{in}\\uparrow \\Rightarrow v_P\\uparrow \\Rightarrow v_X\\uparrow \\Rightarrow V_{out}\\downarrow \\Rightarrow i_{RF}$ flows **out of** node $P$ into $R_F$, subtracting from $I_{in}$ → **negative feedback** ✔\n\n## 2. Feedback (block‑diagram) analysis\n\nFeedback factor: $\\beta = i_{RF}/v_{out} = -1/R_F$ (siemens).\n\nLoading of the $R_F$ network: $R_F$ to ground at the input, $R_F$ to ground at the output:\n\n$$A_0=\\frac{v_{out}}{i_{in}}\\bigg|_{open}=-\\underbrace{\\left(R_F\\!\\parallel\\!\\frac{1}{g_{m1}}\\right)}_{\\text{input node}}g_{m1}R_{D1}\\;g_{m2}\\left(R_{D2}\\!\\parallel\\! R_F\\right)$$\n\n$$\\boxed{T=|\\beta A_0|=\\frac{g_{m1}R_{D1}\\,g_{m2}(R_{D2}\\!\\parallel\\!R_F)}{1+g_{m1}R_F}}$$\n\nHence\n\n$$\\frac{V_{out}}{I_{in}}=\\frac{A_0}{1+T}\\;\\xrightarrow[\\;T\\gg1\\;]{}\\;-R_F,\\qquad\nR_{in}=\\frac{1/g_{m1}\\parallel R_F}{1+T},\\qquad R_{out}=\\frac{R_{D2}\\parallel R_F}{1+T}$$\n\n## 3. Exact small‑signal solution (KCL check, $\\lambda=0$)\n\nWith $v_X=g_{m1}R_{D1}v_P$ and $A\\equiv g_{m1}g_{m2}R_{D1}R_{D2}$, writing KCL at $P$ and at the output gives\n\n$$\\frac{V_{out}}{I_{in}}=\\frac{R_{D2}-A\\,R_F}{1+g_{m1}R_F+g_{m1}R_{D2}+A}\\;\\simeq\\;-\\,\\frac{A\\,R_F}{A+g_{m1}(R_F+R_{D2})+1}$$\n\n$$R_{in}=\\frac{R_F+R_{D2}}{1+g_{m1}R_F+g_{m1}R_{D2}+A},\\qquad\nR_{out}=\\frac{R_{D2}(1+g_{m1}R_F)}{1+g_{m1}R_F+g_{m1}R_{D2}+A}$$\n\nBreaking the loop at the gate of $M_2$ gives the true loop gain\n\n$$T=\\frac{g_{m1}g_{m2}R_{D1}R_{D2}}{1+g_{m1}R_F+g_{m1}R_{D2}}\\;\\approx\\;\\frac{g_{m2}R_{D1}R_{D2}}{R_F}\\quad (g_{m1}R_F\\gg1,\\;R_F\\gg R_{D2})$$\n\n(The small differences from §2 are the usual feedforward term $R_{D2}/R_F$ through $R_F$ — negligible.)\n\n**Sanity limits:** $R_F\\to\\infty$ gives $V_{out}/I_{in}\\to -g_{m2}R_{D1}R_{D2}$, $R_{in}\\to 1/g_{m1}$, $R_{out}\\to R_{D2}$ ✔\n\n## 4. Interpretation / design notes\n\n* **Gain:** $V_{out}/I_{in}\\approx -R_F$ only if $A=g_{m1}R_{D1}g_{m2}R_{D2}\\gg g_{m1}(R_F+R_{D2})$, i.e. if $g_{m2}R_{D1}R_{D2}\\gg R_F$. Note that **the loop gain falls as $R_F$ is raised**, so $R_F$ (the transimpedance) cannot be increased arbitrarily.\n* **Impedances:** both $R_{in}$ and $R_{out}$ are divided by $1+T$ — ideal for a TIA: the low input resistance ($\\approx 1/[g_{m1}(1+T)]$) pushes the pole formed with the photodiode capacitance $C_{in}$ to high frequency, and the low $R_{out}$ drives the next stage.\n* **Bias:** $V_X=V_{DD}-I_{D1}R_{D1}$ must keep $M_2$ in saturation, and $R_F$ carries a dc current $(V_{out}-V_P)/R_F$ that adds to $I_{D1}$ at node $P$ — this must be accounted for in the bias budget.\n* **Refinements:** include body effect of $M_1$ by $g_{m1}\\to g_{m1}+g_{mb1}$; with finite $r_o$, replace $R_{D1}$ by the actual resistance at $X$ and $R_{D2}$ by $R_{D2}\\parallel r_{o2}$.\n* **Dynamics:** two dominant poles (node $X$ with $C_{gs2}$+Miller, and the output node) plus the input pole ⇒ check phase margin; the loop gain $\\propto 1/R_F$ sets the gain–bandwidth/stability trade‑off.",
        "format": "markdown",
        "sha256": "7d9b8775acd328a3d81750bc8fdcc2f9487a1ac6ce90bd610e2a3b91b8303683"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as output-to-input feedback forming a negative-feedback transimpedance amplifier.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 13839,
        "total_tokens": 16354,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11625,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 13839,
        "total_tokens": 16354,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11625,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the topology\n\n| Device | Type | Source | Gate | Drain |\n|---|---|---|---|---|\n| **M₁** | NMOS | node **X** (input node) | **V_b** (ac ground) | **V_out** |\n| **M₂** | PMOS | **V_DD** (ac ground) | **V_out** | node **X** |\n\n* **I₁** is an ideal current source that biases M₁ and acts as its (infinite‑impedance) load.\n* **I_in** pushes signal current into node **X**; the second (down‑arrow) source at X is just a dc sink, call it **I₂**.\n* M₁ is therefore a **common‑gate stage**: current in at the source (X), voltage out at the drain (V_out).\n* M₂ **senses V_out with its gate and returns a current into node X** → it is the feedback element.\n\n**Loop sign check:** V_out ↑ ⇒ V_SG2 ↓ ⇒ I_SD2 ↓ ⇒ V_X ↓ ⇒ V_GS1 ↑ ⇒ I_D1 ↑ ⇒ V_out ↓. \nThe loop is **negative**. Output = voltage, input/feedback = current at the same node ⇒ **shunt–shunt (voltage–current) feedback ⇒ a transimpedance amplifier.**\n\n## 2. Bias point\n\nWith no dc load at the output, KCL gives\n\n$$I_{D1}=I_1 ,\\qquad I_{SD2}=I_1+I_2-I_{in,DC}$$\n\nThe loop automatically positions V_out at whatever value makes M₂ carry that current (self‑biased output node). Head‑room:\n\n$$V_b-V_{TH1}\\;\\le\\;V_{out}\\;\\le\\;V_{DD}-|V_{TH2}| \\quad(\\text{M}_1\\ \\text{sat., M}_2\\ \\text{on})$$\n\n## 3. Small‑signal analysis (let $g_1 \\equiv g_{m1}+g_{mb1}$)\n\n**Output node** (I₁ ideal, output open ⇒ no ac current in M₁):\n\n$$i_{D1}= -g_1v_X+\\frac{v_{out}-v_X}{r_{O1}}=0\\;\\Longrightarrow\\; \\boxed{v_{out}=v_X\\,(1+g_1r_{O1})}$$\n\n**Node X:**\n\n$$I_{in}+i_{D1}=g_{m2}v_{out}+\\frac{v_X}{r_{O2}}\\;\\Longrightarrow\\;I_{in}=g_{m2}v_{out}+\\frac{v_X}{r_{O2}}$$\n\n### Transimpedance\n\n$$\\frac{v_{out}}{I_{in}}=\\frac{1}{\\,g_{m2}+\\dfrac{1}{r_{O2}(1+g_1r_{O1})}\\,}\\;\\simeq\\;\\frac{1}{g_{m2}}$$\n\n*Intuition:* since the ideal I₁ fixes M₁'s current, **every bit of I_in must be absorbed by M₂**, which requires its gate (= V_out) to move by $I_{in}/g_{m2}$.\n\n### Input resistance (the useful feature)\n\n$$R_{in}=\\frac{v_X}{I_{in}}=\\frac{1}{g_{m2}(1+g_1r_{O1})+1/r_{O2}}\\;\\simeq\\;\\frac{1}{g_{m1}g_{m2}r_{O1}}$$\n\ni.e. the plain common‑gate value $1/g_{m1}$ divided by the extra loop gain $g_{m2}r_{O2}$‑type factor.\n\n### Output resistance\n\nOpen‑loop (M₂ gate grounded, M₁ degenerated by $r_{O2}$): $R_{out,open}=r_{O1}+r_{O2}+g_1r_{O1}r_{O2}$\n\n$$R_{out}=\\frac{R_{out,open}}{1+T}\\simeq\\frac{g_1r_{O1}r_{O2}}{g_{m2}r_{O2}\\,g_1 r_{O1}}=\\frac{1}{g_{m2}}$$\n\n### Loop gain (break at M₂'s gate)\n\n$$T=A\\beta=\\underbrace{r_{O2}(1+g_1r_{O1})}_{A\\;=\\;v_{out}/i_{in}\\,|_{\\beta=0}}\\cdot\\underbrace{g_{m2}}_{\\beta\\;[\\mathrm{A/V}]}\\;\\simeq\\;g_{m1}g_{m2}r_{O1}r_{O2}$$\n\nand indeed $A/(1+T)=1/[g_{m2}+1/(r_{O2}(1+g_1r_{O1}))]$ — same as the direct result. ✔\n\n## 4. Numerical feel\n\nWith $g_m=1\\ \\mathrm{mS}$, $r_O=100\\ \\mathrm{k\\Omega}$ (neglecting body effect):\n\n* $T\\approx g_m^2r_O^2 = 10^4$ (80 dB)\n* $v_{out}/I_{in}\\approx 1\\ \\mathrm{k\\Omega}$\n* $R_{in}\\approx 1/(g_m^2 r_O)\\approx 10\\ \\Omega$\n* $R_{out}\\approx 1\\ \\mathrm{k\\Omega}$\n\n## 5. Remarks\n\n* **Function:** a low‑input‑impedance **current buffer / transimpedance front end** (TIA, current‑mode input, \"regulated/active‑feedback cascode\" family). Gain and output impedance are set by one parameter, $g_{m2}$, and are nearly independent of $r_O$ — the signature of strong feedback.\n* **Pole locations:** node X is very low impedance ⇒ its pole is at high frequency; the output node ($R_{out,open}\\approx g_mr_O^2$) carries the dominant pole. Unity loop‑gain frequency ≈ $g_{m2}/C_{out}$, so stability requires $C_X/C_{out}\\ll g_{m1}r_{O1}$ — usually easily met, though $C_{GD2}$ provides a direct out→X path that must be watched.\n* **Limitations:** V_out's dc level is pinned by the requirement $I_{SD2}=I_1+I_2-I_{in,DC}$, so large dc input currents shift the operating point; swing is squeezed between $V_b-V_{TH1}$ and $V_{DD}-|V_{TH2}|$. Noise of I₁, I₂ and M₂ appears directly in series with the signal current.",
        "format": "markdown",
        "sha256": "92379d4c2062184f6b25e894b8047751bb7afdc255ec219ee2407b4e7e6317ac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS input device and M2 as the PMOS feedback device driven by Vout and returning current to the input node. It describes the negative-feedback loop and derives the expected very low input resistance, transimpedance, and output resistance (approximately 1/gm2).",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2364,
        "output_tokens": 14937,
        "total_tokens": 17301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2364,
        "output_tokens": 14937,
        "total_tokens": 17301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\nCall the bottom node (source of M₁, drain of M₂, input node) **X**, and let the unlabelled lower current sink be **I₂**.\n\n* **M₁ (NMOS, gate at V_b)** – its source is X, its drain is V_out → **common‑gate (cascode) input device**.\n* **M₂ (PMOS, source at V_DD)** – its gate is V_out, its drain is X → **common‑source device that feeds the output back to the input node**.\n* I₁ biases the output node, I₂ biases node X.\n\nSo M₁ + M₂ form a **two‑stage negative‑feedback loop** (check the polarity: v_X↑ → I_D1↓ → v_out↑ → |V_GS2|↓ → I_D2↓ → v_X↓ ✔). The input is a **current**, the output a **voltage** → this is a **low‑input‑impedance transimpedance (current‑sensing) stage**.\n\n## 2. Bias point\n\nNothing else draws dc current from the output node, so\n\n$$I_{D1}=I_1 ,\\qquad V_X=V_b-V_{GS1}$$\n\nKCL at X (with dc I_in = 0):\n\n$$I_{D2}=I_2-I_1\\;(>0\\Rightarrow I_2>I_1),\\qquad V_{out}=V_{DD}-|V_{GS2}|$$\n\nBecause I_D1 is **pinned** at I₁, V_GS1 (hence V_X) cannot move → X is a *virtual ground*.\n\n## 3. Small‑signal analysis\n\nTwo unknowns, v_X and v_out (I₁, I₂ are ideal → no ac current):\n\n* KCL at the output node: $-g_{m1}v_X+\\dfrac{v_{out}-v_X}{r_{o1}}=0\\;\\Rightarrow\\; \\boxed{v_{out}=(1+g_{m1}r_{o1})v_X}$\n* KCL at X: $i_{in}=g_{m2}v_{out}+\\dfrac{v_X}{r_{o2}}+g_{m1}v_X-\\dfrac{v_{out}-v_X}{r_{o1}}=g_{m2}v_{out}+\\dfrac{v_X}{r_{o2}}$\n\nHence\n\n$$\\frac{V_{out}}{I_{in}}=\\frac{1+g_{m1}r_{o1}}{g_{m2}(1+g_{m1}r_{o1})+1/r_{o2}}\\;\\simeq\\;\\frac{1}{g_{m2}}$$\n\n$$R_{in}=\\frac{v_X}{i_{in}}=\\frac{1}{g_{m2}(1+g_{m1}r_{o1})+1/r_{o2}}\\;\\simeq\\;\\frac{1}{g_{m1}g_{m2}r_{o1}}$$\n\n$$R_{out}\\simeq\\frac{1}{g_{m2}}\\qquad(\\text{output} \\equiv \\text{Norton source } i_{in} \\parallel 1/g_{m2})$$\n\n(With body effect on M₁ replace $g_{m1}\\to g_{m1}+g_{mb1}$; M₂ has none, its bulk ties to V_DD.)\n\n**With λ = 0** the result is exact and trivial: v_X = 0 (ideal virtual ground, R_in = 0), all of i_in flows into M₂’s drain, so $V_{out}=I_{in}/g_{m2}$.\n\n**Physical picture:** M₁’s current is fixed by I₁, so the input current *must* be absorbed by M₂; M₂ accommodates ΔI = I_in only by changing its gate voltage by I_in/g_m2 — and that gate *is* the output.\n\n## 4. Feedback view\n\nBreaking the loop at M₂’s gate (zero loading there) gives\n\n$$T=g_{m2}r_{o2}\\,(1+g_{m1}r_{o1})\\approx g_{m1}g_{m2}r_{o1}r_{o2}$$\n\nOpen loop (M₂ gate grounded) R_X = r_{o2} and the transimpedance is r_{o2}(1+g_{m1}r_{o1}); dividing both by (1+T) reproduces the results above. The very large loop gain (product of two intrinsic gains) is what makes R_in only a few ohms and makes the gain accurately 1/g_m2.\n\n## 5. Large‑signal behaviour and limits\n\nWith M₂ in saturation, $I_{D2}=I_2-I_1-I_{in}$, so\n\n$$V_{out}=V_{DD}-|V_{TH2}|-\\sqrt{\\frac{2(I_2-I_1-I_{in})}{\\mu_pC_{ox}(W/L)_2}},\\qquad \\frac{dV_{out}}{dI_{in}}=\\frac{1}{g_{m2}}\\;\\checkmark$$\n\n* Maximum input current: $I_{in}<I_2-I_1$ (beyond it M₂ shuts off, loop breaks, V_out → V_DD).\n* M₁ in saturation requires $V_{out}\\ge V_b-V_{TH1}=V_X+V_{ov1}$ (lower swing limit).\n* M₂ in saturation requires $V_{out}\\ge V_X-|V_{TH2}|$ (normally not binding).\n\n## 6. Frequency response / stability\n\nWith C_X at node X and C_L at the output (λ = 0):\n\n$$\\frac{V_{out}}{I_{in}}=\\frac{1/g_{m2}}{1+s\\frac{C_L}{g_{m2}}+s^2\\frac{C_XC_L}{g_{m1}g_{m2}}},\\quad \\omega_0=\\sqrt{\\frac{g_{m1}g_{m2}}{C_XC_L}},\\quad Q=\\sqrt{\\frac{g_{m2}C_X}{g_{m1}C_L}}$$\n\nBoth nodes are low‑impedance → wide bandwidth, but the two‑pole loop can peak/ring: keep $g_{m2}C_X\\lesssim g_{m1}C_L/2$ (large g_m1, small input capacitance) for a well‑damped response.\n\n## 7. Summary\n\n| Quantity | Result |\n|---|---|\n| Transimpedance V_out/I_in | ≈ 1/g_m2 |\n| Input resistance | ≈ 1/[g_m2(1+g_m1r_o1)] ≈ 1/(g_m1g_m2r_o1) |\n| Output resistance | ≈ 1/g_m2 |\n| Loop gain | ≈ g_m1g_m2r_o1r_o2 |\n| Bias | I_D1 = I₁, I_D2 = I₂ − I₁ (need I₂ > I₁) |\n\nIt is a **current buffer / transimpedance front‑end**: M₁ is a common‑gate device whose constant current creates a virtual ground at the input, and the PMOS feedback device M₂ converts the input current into the output voltage with gain 1/g_m2 — exactly the kind of stage used ahead of photodiodes, in current mirrors/conveyors and current comparators.",
        "format": "markdown",
        "sha256": "88e494398b15ddd954554f464218bdf52795092c9fd1acdb231ce9ab00b2c788"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS input device and M2 as the PMOS feedback device driven by Vout, describes feedback to the input node, and gives the low input resistance and approximately 1/gm2 transimpedance and output resistance.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2364,
        "output_tokens": 18075,
        "total_tokens": 20439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2364,
        "output_tokens": 18075,
        "total_tokens": 20439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Recognizing the topology\n\n| Device | Type | Terminals | Role |\n|---|---|---|---|\n| **M₁** | NMOS | source = node **X** (input), drain = **V_out**, gate = **V_b** (ac ground) | **common‑gate (cascode) stage**, gain stage of the loop |\n| **I₁** | current source | VDD → V_out | load of M₁ (ideally infinite impedance) |\n| **M₂** | PMOS | source = VDD, **gate = V_out**, drain = node **X** | **common‑source feedback device** (returns a current to the input node) |\n| **I_in , I_B** | current sources at X | — | signal current in, dc bias current out |\n\nSo the signal path is a loop:\n\n$$X \\;\\xrightarrow{\\text{CG }M_1}\\; V_{out}\\;\\xrightarrow{\\text{CS }M_2}\\; X$$\n\n**Polarity check:** v_X↑ → V_GS1↓ → I_D1↓ → V_out↑ → |V_GS2|↓ → I_D2↓ → less current pushed into X → v_X↓.  **Negative feedback** — the output voltage is *sensed* and a *current* is returned to the input node ⇒ **shunt–shunt (voltage‑sense, current‑mix) feedback**. This is the classic **active‑feedback / “regulated‑cascode’’ current buffer (transimpedance) input stage.**\n\n## 2. Bias point\n\nKCL at V_out (ideal I₁, no gate current): \n\n$$I_{D1}=I_1$$\n\nKCL at X: \n\n$$I_{D2}=I_B+I_1-I_{IN(dc)}$$\n\n$$V_X=V_b-V_{GS1}\\simeq V_b-V_{TH1}-V_{ov1},\\qquad V_{out}=V_{DD}-V_{SG2}$$\n\nSaturation limits: M₁ needs V_out ≥ V_b − V_TH1; M₂ needs V_out ≥ V_X − |V_TH2|. The usable input range is bounded by I_in < I_B + I_1 (M₂ must stay on).\n\n## 3. Small‑signal analysis\n\nLet g₁ = 1/r_{O1}, g₂ = 1/r_{O2}; gate V_b and source of M₂ are ac grounds.\n\n**Node V_out** (I₁ ideal ⇒ M₁’s drain current must be zero):\n\n$$-g_{m1}v_X+\\frac{v_{out}-v_X}{r_{O1}}=0\\;\\Longrightarrow\\; \\boxed{A_1\\equiv\\frac{v_{out}}{v_X}=1+g_{m1}r_{O1}}$$\n\n**Node X:**\n\n$$i_{in}=g_{m2}v_{out}+\\frac{v_X}{r_{O2}}+\\underbrace{\\Big[g_{m1}v_X-\\frac{v_{out}-v_X}{r_{O1}}\\Big]}_{=0}$$\n\n### Results\n\n$$\\frac{v_{out}}{i_{in}}=\\frac{1}{g_{m2}+\\dfrac{1}{r_{O2}(1+g_{m1}r_{O1})}}\\;\\simeq\\;\\frac{1}{g_{m2}}$$\n\n$$R_{in}=\\frac{v_X}{i_{in}}=\\frac{r_{O2}}{1+g_{m2}r_{O2}(1+g_{m1}r_{O1})}\\;\\simeq\\;\\frac{1}{g_{m1}g_{m2}r_{O1}}$$\n\n$$R_{out}\\Big|_{i_{in}=0}=\\frac{g_{m1}+g_1+g_2}{g_1g_2+g_{m2}(g_{m1}+g_1)}\\;\\simeq\\;\\frac{1}{g_{m2}}$$\n\n**Loop gain (return ratio through g_m2):**\n\n$$T=g_{m2}r_{O2}\\,(1+g_{m1}r_{O1})\\;\\approx\\;(g_{m1}r_{O1})(g_{m2}r_{O2})$$\n\nand indeed the feedback formulas are satisfied:\n\n$$R_{in}=\\frac{r_{O2}}{1+T},\\qquad R_{out}=\\frac{r_{O1}+r_{O2}+g_{m1}r_{O1}r_{O2}}{1+T}\\simeq\\frac{1}{g_{m2}}$$\n\n## 4. Physical interpretation\n\n* Because I₁ fixes I_D1 = I₁, **all** of the signal current must be absorbed by M₂: ΔI_D2 = −I_in, which requires ΔV_out = I_in/g_m2. Hence the transimpedance **1/g_m2** — M₂ behaves like a *diode‑connected* device, but its gate is driven by the gain stage M₁ instead of by its own drain.\n* Consequently the input node is a **virtual ground**: its voltage moves only by I_in·R_in ≈ I_in/(g_m1g_m2r_{O1}) — a factor (1+g_{m1}r_{O1}) lower than a plain common‑gate buffer (1/g_m1) and a factor T lower than a plain diode connection.\n* Replicating M₂ with a second PMOS whose gate also ties to V_out turns this into a **high‑accuracy, very‑low‑input‑impedance current mirror** (active‑input / regulated cascode mirror); as drawn it is a current buffer / TIA with low output impedance (≈1/g_m2) as well.\n\n**Numerical example** (g_m1 = g_m2 = 1 mS, r_{O1} = r_{O2} = 100 kΩ):\nT ≈ 10⁴, R_in ≈ 10 Ω, R_out ≈ 1 kΩ, v_out/i_in ≈ 1 kΩ.\n\n## 5. Design cautions\n\n1. **Headroom:** V_out ≥ V_b − V_TH1 for M₁; V_out = V_DD − V_SG2 must also keep M₂ in saturation — the two constraints squeeze the output swing.\n2. **Signal range:** I_in < I_1 + I_B, otherwise M₂ shuts off and the loop opens.\n3. **Stability:** the loop has two poles (node X, ω ≈ 1/R_inC_X — very fast; node V_out, ω ≈ g_m2/C_out) and a high dc loop gain ⇒ check phase margin; the usual fix is capacitance (or a resistor in series with M₂’s gate) at the output node.\n4. **Finite I₁ output resistance R₁** simply replaces r_{O1} by (r_{O1}‖R₁): A₁ ≈ g_{m1}(r_{O1}\\|R_1), R_in ≈ 1/[g_{m2}g_{m1}(r_{O1}\\|R_1)], v_out/i_in ≈ 1/(g_{m2}+1/R_1).\n5. **Noise/offset:** M₂ and the two current sources inject noise directly at the output/input nodes; M₁ contributes little because it is a cascode inside the loop.",
        "format": "markdown",
        "sha256": "4053ae0ee92f294fa22e0e50168e7e23f5180d0fddc1767628bedd2854e71d5a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, describes the feedback path to the input node, and gives the low input resistance and transimpedance/output-resistance results. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2364,
        "output_tokens": 14304,
        "total_tokens": 16668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2364,
        "output_tokens": 14304,
        "total_tokens": 16668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**No.** Making the load capacitors arbitrarily large does *not* stop the oscillation — it only makes the oscillation arbitrarily *slow*.\n\n## Why\n\nModel each inverter as a single‑pole gain stage (transconductance $g_m$, output resistance $R_{out}$, load $C_L$):\n\n$$A(s)=\\frac{-g_mR_{out}}{1+sR_{out}C_L},\\qquad \\omega_0=\\frac{1}{R_{out}C_L}$$\n\nThe loop transmission of the three‑stage ring is\n\n$$H(s)=-\\left[\\frac{g_mR_{out}}{1+sR_{out}C_L}\\right]^{3}$$\n\n**Phase condition:** the DC inversion supplies 180°, so each stage must contribute 60°:\n\n$$\\tan 60^\\circ=\\omega_{osc}R_{out}C_L\\;\\Rightarrow\\;\\boxed{\\omega_{osc}=\\frac{\\sqrt{3}}{R_{out}C_L}}$$\n\n**Gain condition:** at that frequency each stage's gain drops by $\\sqrt{1+3}=2$, so\n\n$$\\frac{(g_mR_{out})^{3}}{2^{3}}\\ge 1\\;\\Rightarrow\\;g_mR_{out}\\ge 2$$\n\nNotice that the **start‑up condition contains no $C_L$ at all**. The capacitance affects only where the poles sit (and hence the frequency), not the low‑frequency gain. As $C_L\\to\\infty$ the three poles simply crowd toward the origin, the oscillation frequency falls as $1/C_L$, but the loop still satisfies Barkhausen's criteria.\n\nThe same conclusion follows from the large‑signal (ring‑oscillator) view: each stage charges $C_L$ with roughly a constant current $I_D$, giving a delay $t_d \\approx C_L\\,V_{DD}/(2I_D)$, so\n\n$$f_{osc}=\\frac{1}{6t_d}\\propto\\frac{1}{C_L}$$\n\n— a lower frequency, but still an oscillation.\n\n## Practical caveats\n\nOnly *second‑order* effects can eventually kill it: if $C_L$ is so large that the period becomes comparable to leakage/discharge time constants (or if adding the capacitance also loads the stage in a way that reduces $g_mR_{out}$ below 2), the circuit degenerates. In the idealized model, however, large $C_L$ just yields a very slow oscillator (with a correspondingly long start‑up time, since the growth rate of the oscillation also scales with $\\omega_0$).",
        "format": "markdown",
        "sha256": "73950f92cc2b93ac152177ad3165260846c6b5e5a559ec8597ae69e643263b67"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal loading at all three nodes does not stop oscillation, and the small-signal phase and gain analysis shows the frequency falls as 1/CL while the startup condition is independent of CL.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2398,
        "output_tokens": 2027,
        "total_tokens": 4425,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1140,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2398,
        "output_tokens": 2027,
        "total_tokens": 4425,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1140,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## No — it still oscillates; it just gets slower\n\n**Small‑signal (Barkhausen) view**\n\nModel each inverter as a single‑pole amplifier,\n\n$$H(s)=\\frac{-A_0}{1+s/\\omega_0},\\qquad \\omega_0=\\frac{1}{R_{out}C_L}$$\n\nso the loop transmission of the three‑stage ring is\n\n$$L(s)=\\frac{-A_0^{3}}{\\left(1+s/\\omega_0\\right)^{3}}$$\n\n*Phase condition:* the dc inversion supplies 180°, so each stage must add 60°:\n\n$$\\tan 60^\\circ=\\frac{\\omega_{osc}}{\\omega_0}=\\sqrt3 \\;\\;\\Rightarrow\\;\\; \\omega_{osc}=\\sqrt3\\,\\omega_0=\\frac{\\sqrt3}{R_{out}C_L}$$\n\n*Gain condition:* at that frequency each stage's gain has dropped by $\\sqrt{1+3}=2$, hence\n\n$$\\frac{A_0^{3}}{8}\\ \\ge 1\\;\\;\\Rightarrow\\;\\;A_0\\ \\ge\\ 2$$\n\nThe key point: **the gain requirement ($A_0 \\ge 2$) contains no $C_L$**. The capacitors appear only in $\\omega_{osc}$. So no matter how large $C_L$ becomes, the Barkhausen criteria remain satisfied — the oscillation frequency simply falls as $1/C_L$.\n\n**Large‑signal view**\n\nA ring with an odd number of inversions has no stable dc operating point (the only equilibrium, $V_{in}=V_{out}=V_{trip}$, is unstable for $A_0>2$). Adding capacitance cannot create a stable state; it only lengthens the charging/discharging time of each node,\n\n$$t_d \\sim \\frac{C_L\\,\\Delta V}{I_{drive}},\\qquad f_{osc}=\\frac{1}{6t_d}$$\n\n**Conclusion:** For any finite $C_L$ the circuit oscillates, with $f_{osc}\\propto 1/C_L$. Only in the mathematical limit $C_L\\to\\infty$ does the frequency approach zero (an infinitely slow, i.e. frozen, oscillation) — but there is no finite value of $C_L$ at which oscillation stops. (Contrast this with the two‑stage ring, which *cannot* oscillate regardless of $C_L$, because two identical poles can never supply the required 180°.)",
        "format": "markdown",
        "sha256": "df3348bb97b0119a29b91f5e1c4850b9e25639a5fc87921360e9efa98921621f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three added capacitors lower the oscillation frequency without changing the Barkhausen gain condition, and supports this with a sound per-stage phase and gain analysis. The extra comments do not undermine the essential answer.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2398,
        "output_tokens": 1648,
        "total_tokens": 4046,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 794,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2398,
        "output_tokens": 1648,
        "total_tokens": 4046,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 794,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**No — it keeps oscillating.** Making $C_L$ arbitrarily large only makes the oscillation arbitrarily *slow*; it never kills the oscillation.\n\n## Why (small‑signal / Barkhausen view)\n\nModel each inverter as a gain stage with low‑frequency gain $-A_0$, output resistance $R_{out}$, and load $C_L$:\n\n$$H(s)=\\frac{-A_0}{1+sR_{out}C_L},\\qquad \\omega_p=\\frac{1}{R_{out}C_L}$$\n\nThe loop transmission of the three‑stage ring is\n\n$$L(s)=\\frac{-A_0^{3}}{\\left(1+s/\\omega_p\\right)^{3}}$$\n\n**Phase condition:** the inversions already give $180^\\circ$, so each pole must add $60^\\circ$:\n\n$$\\tan 60^\\circ=\\frac{\\omega_{osc}}{\\omega_p}=\\sqrt{3}\\;\\Rightarrow\\; \\boxed{\\omega_{osc}=\\frac{\\sqrt3}{R_{out}C_L}}$$\n\n**Gain condition:** at that frequency each stage's magnitude is $A_0/\\sqrt{1+3}=A_0/2$, so\n\n$$\\frac{A_0^{3}}{8}\\ge 1\\;\\Rightarrow\\; A_0\\ge 2$$\n\nNotice that the **gain requirement ($A_0 \\ge 2$) contains no $C_L$ at all**. The capacitors set *where* the poles are (hence the frequency), but all three poles move together, so the stage gain at the $60^\\circ$ point is always $A_0/2$ regardless of $C_L$. Thus if the ring oscillates for one value of $C_L$, it oscillates for every value.\n\n$$f_{osc}=\\frac{\\sqrt3}{2\\pi R_{out}C_L}\\;\\xrightarrow[C_L\\to\\infty]{}\\;0$$\n\n## Large‑signal / topological view\n\nThe same conclusion follows without any small‑signal algebra: at DC the capacitors are open circuits, so the ring has only one equilibrium — the point where every node sits at the inverter trip point $V_M$. Since $A_0>1$ there, that equilibrium is unstable, and an **odd** number of inversions provides no stable latched state. The circuit therefore has nowhere to settle and must switch continuously, with period\n\n$$T=6\\,t_{pd},\\qquad t_{pd}\\approx \\frac{C_L\\,\\Delta V}{I_{D}}$$\n\nSo a huge $C_L$ just stretches each stage delay (slew‑rate limited transitions), giving a very low frequency, large swings (rail‑to‑rail), and high power per cycle — but the ring still oscillates.",
        "format": "markdown",
        "sha256": "b8b79f4d32ba000f6cd4643c88e738a17a461d35ef88c90a618db35a1166cb9a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal loading at all three nodes lowers the frequency without removing oscillation. The small-signal phase and gain analysis is appropriate and shows the oscillation condition is independent of capacitance; the delay argument agrees.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2398,
        "output_tokens": 2009,
        "total_tokens": 4407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2398,
        "output_tokens": 2009,
        "total_tokens": 4407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the scaling\n\nFor a ring of $N$ inverters, each node charged/discharged by a current $\\approx I$ into $C_L$:\n\n**Delay / frequency**\n\n$$t_d \\approx \\frac{C_L V_{DD}}{2I}\\qquad\\Rightarrow\\qquad f_0=\\frac{1}{2Nt_d}\\approx\\frac{I}{NC_LV_{DD}}$$\n\n**Jitter per transition** – the noise that matters is the charge noise integrated on $C_L$, giving a voltage uncertainty $\\overline{v_n^2}\\propto kT/C_L$ at the switching point. Dividing by the slew rate $SR = I/C_L$:\n\n$$\\sigma_t^2 \\;\\propto\\; \\frac{kT/C_L}{(I/C_L)^2}=\\frac{kT\\,C_L}{I^2}$$\n\nWith $2N$ transitions per period, $\\sigma_T^2 \\propto 2N\\,kTC_L/I^2$, and for accumulating (random‑walk) jitter\n\n$$S_\\phi(\\Delta f)=\\frac{f_0^{3}\\,\\sigma_T^{2}}{\\Delta f^{2}}\\;\\propto\\;\\Big(\\frac{I}{NC_LV_{DD}}\\Big)^{3}\\frac{N\\,kT\\,C_L}{I^{2}\\,\\Delta f^{2}}\n\\;=\\;\\frac{kT\\,I}{N^{2}C_L^{2}V_{DD}^{3}\\,\\Delta f^{2}}$$\n\n## Result of doubling $C_L$ (same devices, same $I$, same $V_{DD}$)\n\n| Quantity | Change |\n|---|---|\n| Oscillation frequency $f_0$ | **÷2** |\n| Power $P \\approx NC_LV_{DD}^2f_0 = IV_{DD}$ | **unchanged** |\n| rms jitter per cycle $\\sigma_T \\propto \\sqrt{C_L}$ | ×1.41 (worse) |\n| Phase noise at a **fixed offset** $\\Delta f$ ($\\propto 1/C_L^2$) | **−6 dB** |\n| Phase noise at a fixed **relative** offset $\\Delta f/f_0$ | **unchanged** |\n\nSo the phase noise measured at, say, 1 MHz offset drops by a factor of 4 (6 dB) — but only because the carrier itself has dropped by 2×. Written in the canonical form\n\n$$\\mathcal{L}(\\Delta f)\\;\\propto\\;\\frac{kT}{P}\\,\\frac{V_{DD}}{V_{\\rm char}}\\left(\\frac{f_0}{\\Delta f}\\right)^{2}$$\n\nthe power is the same and $f_0$ is halved → exactly the 6 dB. Since both $\\mathcal{L}$ and $20\\log(f_0/\\Delta f)$ move by 6 dB, the **figure of merit is unchanged**: doubling the load capacitors buys you nothing in the noise–power trade‑off; it just trades frequency for noise (the absolute cycle‑to‑cycle jitter actually gets worse by $\\sqrt2$).\n\n**If instead you want to keep $f_0$ the same,** you must double the transistor widths (double $I$), i.e. scale the whole ring by 2. Then $\\mathcal{L}\\propto I/C_L^2 \\to 2/4 = 1/2$: the phase noise improves by 3 dB while the power doubles — the usual \"spend power to buy phase noise\" result.",
        "format": "markdown",
        "sha256": "16335af331071876dd3633be6a3d57158c59d94ab0fcb20a203421843268f020"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about 6 dB (a factor of four) at a fixed offset, with a valid frequency-scaling justification. It also correctly notes that phase noise is unchanged at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2390,
        "output_tokens": 6305,
        "total_tokens": 8695,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2390,
        "output_tokens": 6305,
        "total_tokens": 8695,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nFor an inverter‑based ring, each stage delay is set by how long it takes the stage current to swing the node:\n\n$$t_d \\approx \\frac{C_L V_{DD}}{2I_D},\\qquad f_0=\\frac{1}{2Nt_d}=\\frac{1}{6t_d}$$\n\nSo if the transistors are left alone and $C_L\\rightarrow 2C_L$:\n\n* $t_d$ doubles → **$f_0$ is halved**\n* dynamic power $P = NC_LV_{DD}^2f_0$ → **unchanged** (C doubles, f halves) ; equivalently $P \\approx I_DV_{DD}$ is unchanged.\n\n## Jitter per Transition\n\nNoise current integrates on $C_L$ during a transition and is converted to a time error by the slope $dV/dt = I_D/C_L$:\n\n$$\\sigma_t^2=\\frac{\\overline{\\Delta V^2}}{(dV/dt)^2}\\;,\\qquad \\overline{\\Delta V^2}\\sim\\frac{kT}{C_L}\\;\\;\\left(\\text{or }\\frac{2kT\\gamma g_m t_d}{C_L^2}\\right)$$\n\n$$\\Rightarrow \\sigma_t^2 \\approx \\frac{2kT\\gamma g_m\\,t_d}{I_D^2}\\;\\propto\\;C_L$$\n\nSo the **absolute** jitter of one edge grows by $\\sqrt2$. But what sets phase noise is the jitter accumulated *per unit time*:\n\n$$\\kappa=\\frac{\\sigma_t^2}{t_d}\\approx\\frac{2\\gamma kT\\,g_m}{I_D^{2}}\\approx \\frac{kT}{2P}\\quad\\text{— independent of }C_L$$\n\n## Result\n\n$$S_\\phi(\\Delta f)=\\kappa\\,\\frac{f_0^{2}}{\\Delta f^{2}}\\;\\;\\Longrightarrow\\;\\; L(\\Delta f)\\propto \\frac{kT}{P}\\left(\\frac{f_0}{\\Delta f}\\right)^2$$\n\nSince $\\kappa$ (and $P$) do not change but $f_0$ is halved:\n\n**The phase noise at a given offset frequency drops by a factor of 4, i.e. it improves by 6 dB.**\n\n## The Catch\n\nThe improvement is bought entirely with speed, not with better noise performance:\n\n* At a given **fractional** offset ($\\Delta f/f_0$ fixed, e.g. 1% of the carrier) the phase noise is **exactly the same**.\n* The figure of merit $\\text{FoM}=L(\\Delta f)-20\\log(f_0/\\Delta f)+10\\log(P/1\\,\\text{mW})$ is **unchanged**.\n\nIn other words, loading a ring with more capacitance just slides you down the same $f_0^2$ trade‑off line — it is equivalent to simply running the oscillator at a lower frequency.\n\n(If instead you want to keep $f_0$ fixed while doubling $C_L$, you must double the device widths and hence $I_D$. Then $\\kappa\\propto g_m/I_D^2$ halves, giving a **3 dB** phase‑noise improvement for 2× the power — the usual \"scale the oscillator up\" rule.)",
        "format": "markdown",
        "sha256": "c87195d36c58c6636938f1c65af52fa180bbfcaa587c64b8e97694af99538c18"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency, so phase noise falls by about 6 dB (a factor of four) at a fixed offset; it also correctly notes that it is unchanged at a fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2390,
        "output_tokens": 7859,
        "total_tokens": 10249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2390,
        "output_tokens": 7859,
        "total_tokens": 10249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting it up\n\nFor an *N*-stage inverter ring, each stage charges/discharges its own $C_L$ with the inverter's drive current, so\n\n$$t_D \\approx \\frac{C_LV_{DD}}{2I_D}\\qquad\\Rightarrow\\qquad f_0=\\frac{1}{2Nt_D}\\propto \\frac{I_D}{NC_LV_{DD}}$$\n\n**Doubling $C_L$ therefore halves the oscillation frequency.**\n\nFor the phase noise, inject each stage's thermal noise current onto its node capacitance (ISF / impulse‑sensitivity picture):\n\n$$S_\\phi(\\Delta\\omega)\\;\\propto\\;\\frac{N\\,\\overline{i_n^2}}{q_{max}^2\\,\\Delta\\omega^2}\n=\\frac{N\\cdot 4kT\\gamma g_m}{(C_LV_{DD})^2\\,\\Delta\\omega^{2}}$$\n\nEquivalently, in the familiar \"ring‑oscillator\" form,\n\n$$\\mathcal{L}(\\Delta\\omega)\\;\\approx\\;\\xi\\,\\frac{kT}{P}\\left(\\frac{\\omega_0}{\\Delta\\omega}\\right)^{2}$$\n\n## Effect of doubling the three capacitors\n\nThe transistors are untouched, so $g_m$, $I_D$ and $\\gamma$ are the same; only $C_L$ changes:\n\n$$S_\\phi \\propto \\frac{1}{C_L^{2}}\\;\\Longrightarrow\\;\\text{phase noise falls by a factor of 4, i.e. }\\boxed{-6\\ \\text{dB}}\\ \\text{at a given offset }\\Delta f$$\n\nYou get the same answer from the second form: the dynamic power $P\\approx NC_LV_{DD}^2f_0$ is **unchanged** (C doubles, $f_0$ halves), while $\\omega_0$ is halved, so $\\mathcal{L}\\propto\\omega_0^2$ drops by 6 dB.\n\n## But it isn't a free lunch\n\n* **Normalized phase noise is unchanged.** At the same *relative* offset $\\Delta\\omega/\\omega_0$, $\\mathcal{L}$ is identical, and the FoM\n$\\text{FoM}=\\mathcal{L}(\\Delta f)-20\\log(f_0/\\Delta f)+10\\log(P/1\\text{mW})$ does not move. All we did was trade speed for noise.\n* **Jitter is unchanged.** Per transition $\\sigma_{\\Delta t}^2 \\approx \\xi kTC_L/I_D^2$ doubles, but there are half as many transitions per second, so the jitter accumulation rate $\\kappa^2=\\sigma^2_{\\Delta t}/\\Delta T \\approx \\xi kT/(I_DV_{DD})$ — which depends only on power — stays the same.\n* **If you must keep $f_0$ fixed**, you have to double the device widths along with $C_L$ ($I_D, g_m \\to 2\\times$). Then $S_\\phi\\propto g_m/C_L^2$ gives only a 3 dB improvement for 2× the power — the usual \"double the power, gain 3 dB\" scaling.",
        "format": "markdown",
        "sha256": "f928b49f6290cb24f9a15e4b52b8396236253687e96c8e3bef74f87df548d941"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by a factor of four (6 dB) at a fixed offset; it also correctly notes the unchanged result at fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2390,
        "output_tokens": 7635,
        "total_tokens": 10025,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6551,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2390,
        "output_tokens": 7635,
        "total_tokens": 10025,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6551,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nYes. If $C_L$ is made large enough, the ring stops oscillating and instead settles to a stable dc operating point (all three nodes sitting near the inverter trip point). A big capacitor on one node does **not** just \"slow the oscillator down\" indefinitely.\n\n## Why — Barkhausen view\n\nModel each inverter as a gain $-A_0$ with output resistance $R$ and intrinsic node capacitance $C$. The loaded node has pole\n\n$$\\omega_1=\\frac{1}{R(C+C_L)}\\ \\ll\\ \\omega_p=\\frac{1}{RC}\\quad(\\text{the two other nodes})$$\n\nso the loop gain is\n\n$$H(s)=\\frac{-A_0^{3}}{\\left(1+\\dfrac{s}{\\omega_1}\\right)\\left(1+\\dfrac{s}{\\omega_p}\\right)^{2}} .$$\n\nThe three inversions already give 180°, so the **poles must supply the other 180°**. For large $C_L$ the dominant pole contributes essentially 90° at any frequency of interest, so the two fast poles must make up the remaining 90°, i.e. 45° each:\n\n$$\\omega_{osc}\\approx\\omega_p \\quad(\\text{set by the \\emph{fast} stages, not by } C_L!)$$\n\nEvaluating the magnitude there:\n\n$$|H(j\\omega_p)|\\approx\\frac{A_0^{3}}{\\dfrac{\\omega_p}{\\omega_1}\\cdot(\\sqrt2)^{2}}=\\frac{A_0^{3}}{2}\\cdot\\frac{C}{C+C_L}\\ \\xrightarrow[C_L\\to\\infty]{}\\ 0 .$$\n\nSo the unity‑loop‑gain condition fails once\n\n$$\\boxed{C_L\\;\\gtrsim\\;\\frac{A_0^{3}}{2}\\,C}$$\n\n(Routh–Hurwitz on $(s+\\omega_1)(s+\\omega_p)^2+A_0^3\\omega_1\\omega_p^2=0$ gives the same result: the closed‑loop poles move back into the left half plane as $\\omega_1\\to0$.)\n\n## Intuitive view\n\nA very large $C_L$ makes that node a **dominant pole** — exactly what you do when you frequency‑compensate a feedback amplifier. The loop then looks first‑order: its unity‑gain crossover $\\approx A_0^{3}\\omega_1$ drops below the non‑dominant poles $\\omega_p$, phase margin becomes large, and the loop is stable.\n\nEquivalently, in the large‑signal picture: node A charges at $I/C_L$, so the overshoot past the trip point before the two fast stages can reverse the drive is $\\Delta V\\approx (I/C_L)t_d$. When $C_L$ is huge, $\\Delta V$ is smaller than the (finite) transition width $\\sim V_{DD}/A_0^3$ of the three‑inverter chain, so the fast path \"catches\" the node and it creeps to the trip point instead of slamming to the other rail. The circuit behaves as a slow, stable high‑gain amplifier, not an oscillator.\n\n## Practical note\n\nBecause $A_0^3/2$ is large for CMOS inverters (e.g. $A_0\\approx10$ → $C_L$ up to a few hundred times the node capacitance), modest load capacitors *do* work as a frequency‑tuning element — which is why loaded/varactor‑tuned rings are used. But in the limit $C_L\\to\\infty$ the loop gain at the 180° frequency falls below unity and oscillation ceases.",
        "format": "markdown",
        "sha256": "a6713fc539c9df198d20db2375a9b2e6d183638756e7c6fd32aba6d6ddf6e4bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large capacitance on one node creates a dominant pole and drives loop gain below unity at the phase-crossover frequency, so oscillation ceases. The added frequency and threshold estimates are consistent approximations and do not contradict the essential result.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2290,
        "output_tokens": 8369,
        "total_tokens": 10659,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7149,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2290,
        "output_tokens": 8369,
        "total_tokens": 10659,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7149,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**Yes.** For a *sufficiently* large $C_L$ the ring stops oscillating and settles with all three nodes sitting at the inverter trip point. The capacitor does **not** simply keep lowering the frequency forever.\n\n## Why — small‑signal (Barkhausen) view\n\nModel each inverter as $g_m$, output resistance $R$, self‑load $C$, so $A_0=g_mR$. The loaded node has pole $\\omega_1=1/[R(C+C_L)]$, the other two have $\\omega_2=1/(RC)$:\n\n$$T(s)=\\frac{A_0^{3}}{\\left(1+\\dfrac{s}{\\omega_1}\\right)\\left(1+\\dfrac{s}{\\omega_2}\\right)^{2}}\\qquad(\\text{inverting loop} \\Rightarrow \\text{need }180^\\circ\\text{ extra lag})$$\n\n**Phase condition:** $\\arctan(\\omega/\\omega_1)+2\\arctan(\\omega/\\omega_2)=180^\\circ$.\n\nAs $C_L\\to\\infty$, $\\omega_1\\to 0$, so the loaded node supplies at most $90^\\circ$; the remaining $90^\\circ$ must come from the two fast nodes ($45^\\circ$ each), i.e. $\\omega_{osc}\\to\\omega_2=1/(RC)$ — the frequency **saturates**, it does not go to zero.\n\n**Magnitude condition at that frequency:**\n\n$$|T(j\\omega_2)|=\\frac{A_0^{3}}{2\\sqrt{1+(\\omega_2/\\omega_1)^2}}\\simeq \\frac{A_0^{3}}{2}\\frac{\\omega_1}{\\omega_2}=\\frac{A_0^{3}}{2}\\cdot\\frac{C}{C+C_L}\\;\\longrightarrow\\;0 .$$\n\nSo the loop gain at the $180^\\circ$ point falls below unity. Exactly (Routh–Hurwitz on $(s+\\omega_1)(s+\\omega_2)^2+A_0^3\\omega_1\\omega_2^2=0$):\n\n$$\\boxed{\\;\\text{oscillation requires } \\frac{C+C_L}{C}<\\frac{1+A_0^{3}}{2}\\;\\Longrightarrow\\;C_L<\\frac{A_0^{3}-1}{2}\\,C\\;}$$\n\nBeyond this, all closed‑loop poles lie in the left half plane: the circuit has become a **single‑dominant‑pole negative‑feedback amplifier** (the two fast stages can no longer provide the needed extra phase shift while the gain is still >1).\n\n## Why — large‑signal view (same conclusion)\n\nWith a huge $C_L$, node 1 slews slowly, but the feedback around the loop reverses the charging current after only the (small) delay $t_d$ of the two fast inverters. Hence the period saturates at $\\approx 4t_d$, while the swing at the loaded node is only\n\n$$\\Delta V\\approx \\frac{I}{C_L}t_d \\sim \\frac{C}{C_L}V_{DD},$$\n\nwhich shrinks as $C_L$ grows. Once $\\Delta V$ is too small to fully switch the following inverters ($\\Delta V \\lesssim V_{DD}/A_0^{3}$), the oscillation can no longer be regenerated — exactly the condition above.\n\n**Practical note:** since a CMOS inverter has $A_0\\sim10$–$30$, $A_0^3\\sim10^3$–$10^4$, so $C_L$ must exceed hundreds to thousands of times the intrinsic node capacitance before oscillation actually dies; moderate loading merely slows the ring (and ultimately just reduces the swing at that node).",
        "format": "markdown",
        "sha256": "87bc5cf0c4237f0e85b8d61652af3f9880ffb7637c05a116a9ceffaf0a2a9e38"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large one-node loading can stop oscillation and identifies the dominant-pole gain roll-off that violates the Barkhausen condition. The extra threshold and frequency details are not required and do not change the essential conclusion.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2290,
        "output_tokens": 8538,
        "total_tokens": 10828,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7271,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2290,
        "output_tokens": 8538,
        "total_tokens": 10828,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7271,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**Yes — for a large enough $C_L$ the ring stops oscillating** and all three nodes settle at the inverter trip point (a stable dc operating point, with static current flowing). The big capacitor creates a *dominant pole*, which is exactly what you do to **stabilize** a feedback loop.\n\n## Why\n\nModel each inverter as a single‑pole amplifier with low‑frequency gain $-A_0$, output resistance $R$ and node capacitance $C$. Only node 1 carries the extra $C_L$:\n\n$$\\omega_1=\\frac{1}{R(C+C_L)},\\qquad \\omega_2=\\frac{1}{RC}\\;(\\gg\\omega_1)$$\n\n$$H(s)=\\frac{-A_0^{3}}{\\left(1+\\dfrac{s}{\\omega_1}\\right)\\left(1+\\dfrac{s}{\\omega_2}\\right)^{2}}$$\n\n**Phase condition.** The three inversions give 180°, so the poles must supply another 180°:\n\n$$\\tan^{-1}\\frac{\\omega}{\\omega_1}+2\\tan^{-1}\\frac{\\omega}{\\omega_2}=180^\\circ$$\n\nAs $C_L\\to\\infty$, $\\omega_1\\to0$ and the loaded node alone contributes nearly 90°. The two fast stages must then supply 45° each, i.e.\n\n$$\\omega_{osc}\\to\\omega_2=\\frac{1}{RC}$$\n\nNote that the oscillation frequency does **not** keep dropping — it is pinned by the *unloaded* nodes.\n\n**Magnitude condition at that frequency:**\n\n$$|H(j\\omega_2)|=\\frac{A_0^{3}}{\\sqrt{1+(\\omega_2/\\omega_1)^2}\\;\\bigl|1+j\\bigr|^{2}}\\approx\\frac{A_0^{3}}{2}\\frac{\\omega_1}{\\omega_2}=\\frac{A_0^{3}}{2}\\cdot\\frac{C}{C+C_L}\\;\\xrightarrow[\\;C_L\\to\\infty\\;]{}\\;0$$\n\nSo oscillation requires\n\n$$\\boxed{\\,C+C_L\\lesssim \\frac{A_0^{3}}{2}\\,C\\,}$$\n\ni.e. once $C_L$ exceeds roughly $A_0^3C/2$, the loop gain at the 180°‑phase frequency falls below unity and the Barkhausen criterion can no longer be met.\n\n## Intuition\n\nThe heavily loaded stage has already rolled off ($\\sim$90° phase, gain $\\approx A_0\\omega_1/\\omega\\ll A_0$) at the frequency where the other two stages produce the remaining 90°. In other words, $C_L$ turns the three‑stage ring into a *well‑compensated* unity‑gain negative‑feedback amplifier: dominant pole at $\\omega_1$, unity‑gain bandwidth $A_0^3\\omega_1\\ll\\omega_2$, hence large phase margin and no oscillation. Node 1 simply slews to the trip point and stays there.\n\n(Equivalently in the large‑signal picture: the node overshoots the threshold by only $\\Delta V\\approx I_{on}t_{d}/C_L$, which vanishes as $C_L\\to\\infty$, so the \"oscillation\" amplitude collapses to zero.)",
        "format": "markdown",
        "sha256": "4fdfc94444f2176831dcae2291f1a01d8f36d8947b84cf8067c3afae56dd8ed1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large capacitance on one node can stop oscillation, and explains the dominant-pole gain and phase roll-off causing the Barkhausen condition to fail. The asymptotic frequency and threshold estimates are secondary and do not contradict the essential result.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2290,
        "output_tokens": 7001,
        "total_tokens": 9291,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5862,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2290,
        "output_tokens": 7001,
        "total_tokens": 9291,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5862,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Problem\n\nThis is a three‑stage CMOS inverter ring oscillator. Each node is loaded by the transistor capacitances of the stage that drives it plus the stage it drives (a \"self‑loaded\" ring).\n\n**What doubling W does to each quantity:**\n\n| Quantity | Scaling |\n|---|---|\n| Drive current of each inverter, $I_D$ | ×2 |\n| Node capacitance, $C_{node}$ (all device caps) | ×2 |\n| Transconductance $g_m$ | ×2 |\n| Voltage swing (rail‑to‑rail) | unchanged |\n| Oscillation frequency $f_0 \\propto I_D/(C_{node}V_{DD})$ | **unchanged** |\n| Power dissipation $P = V_{DD}I_{avg}$ | ×2 |\n\nSo the oscillator runs at the same frequency with the same swing, but burns twice the power.\n\n## Phase Noise Calculation\n\nUse the charge/ISF view: each node's noise is injected as a current onto the node capacitance,\n\n$$\\mathcal{L}(\\Delta\\omega) \\;\\propto\\; \\frac{\\Gamma_{rms}^{2}\\,\\overline{i_n^2}/\\Delta f}{q_{max}^{2}\\,\\Delta\\omega^{2}},\\qquad q_{max}=C_{node}V_{DD}$$\n\n- **Noise current:** $\\overline{i_n^2} = 4kT\\gamma g_m \\;\\Rightarrow\\; \\times 2$\n- **Maximum charge swing:** $q_{max}=C_{node}V_{DD}\\;\\Rightarrow\\;\\times 2$, so $q_{max}^2 \\Rightarrow \\times 4$\n- **ISF $\\Gamma_{rms}$:** unchanged (same waveform shape, same frequency, same number of stages)\n\n$$\\frac{\\mathcal{L}_{new}}{\\mathcal{L}_{old}} = \\frac{2}{4} = \\frac{1}{2}$$\n\n**Phase noise falls by a factor of 2, i.e. it improves by 3 dB.**\n\nThe same 3 dB holds in the $1/f^3$ region: flicker noise current is $\\overline{i_{n,1/f}^2}=g_m^2\\,K/(C_{ox}WLf) \\propto W^2/W = W$, which scales the same way as the thermal term, while $q_{max}^2 \\propto W^2$.\n\n## Interpretation\n\nThis is just the universal trade‑off $\\mathcal{L}\\propto 1/P$ at constant $f_0$ and constant swing: we spent 2× the power to buy 3 dB. The oscillator's figure of merit\n\n$$\\text{FOM}=\\mathcal{L}(\\Delta\\omega)-20\\log\\frac{\\omega_0}{\\Delta\\omega}+10\\log\\frac{P}{1\\,\\text{mW}}$$\n\nis **unchanged** — doubling the widths doesn't make the topology any better, it just scales it up.\n\n**Caveats:**\n- If the nodes carry significant *fixed* capacitance (wiring, buffer/output load, varactor), doubling W does **not** double $C_{node}$; then $f_0$ rises and the improvement is somewhat different (you'd have to re‑normalize to the same frequency).\n- The 3 dB improvement assumes the devices remain in the same operating regime and that the swing stays rail‑to‑rail.",
        "format": "markdown",
        "sha256": "b02fcaf1fc84bcf6aa98a11c5873c5b46e06807ca4f99a246b91989fb4a7498f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes about a 3 dB phase-noise reduction and supports it with the right scaling: device noise current power doubles while node charge swing doubles, making the signal-charge term four times larger. The added caveats do not undermine the answer.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3615,
        "output_tokens": 3209,
        "total_tokens": 6824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2051,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3615,
        "output_tokens": 3209,
        "total_tokens": 6824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2051,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up\n\nThe circuit is a three‑stage CMOS inverter ring oscillator. Scaling **all** device widths by a factor of 2 (keeping lengths and V_DD the same) changes things as follows:\n\n**Frequency is unchanged.** Each node's capacitance is dominated by the gate/drain capacitance of the devices, so C → 2C. The drive current of each inverter also doubles, I_D → 2I_D. Since the stage delay is roughly\n\n$$t_d \\approx \\frac{C\\,V_{DD}}{2I_D}$$\n\nboth effects cancel and t_d (hence f₀ = 1/2Nt_d) stays essentially the same.\n\n**Swing is unchanged.** The stages still slew rail‑to‑rail, so the carrier amplitude stays ≈ V_DD.\n\n## Effect on noise\n\nEach transistor's thermal noise current PSD is 4kTγg_m ∝ W, i.e. it doubles. But that current is deposited onto a node capacitance that also doubles. The total integrated noise voltage on each node is\n\n$$\\overline{v_n^2} \\sim \\frac{kT}{C} \\;\\;\\longrightarrow\\;\\; \\frac{kT}{2C}$$\n\nSo the noise‑to‑carrier ratio at each node, $\\dfrac{kT/C}{V_{DD}^2}$, is cut in half while the signal (and the ISF/waveform shape, and f₀) are unchanged.\n\n$$\\boxed{L(\\Delta\\omega)\\ \\text{drops by a factor of 2, i.e. } 3\\ \\text{dB}}$$\n\nThe 1/f³ (flicker) portion improves too, since the gate‑referred flicker noise $\\propto K/(C_{ox}WL f)$ is halved when the device area doubles.\n\n## The catch\n\nThe power dissipation $P \\approx f_0\\,C_{tot}V_{DD}^2$ also **doubles**. This is the well‑known ring‑oscillator trade‑off\n\n$$L(\\Delta\\omega)\\ \\propto\\ \\frac{kT}{P}\\left(\\frac{\\omega_0}{\\Delta\\omega}\\right)^2 ,$$\n\nso the figure of merit (phase noise × power at a given f₀/Δω) is *unchanged* — you simply buy 3 dB of phase noise with 2× the power (and 2× the area). Equivalently, widening the devices is only useful if you then retune (e.g. with added load capacitance or supply/current control) to get back to the desired frequency.",
        "format": "markdown",
        "sha256": "545fd75b0352be2b4c77bb06d85e52b620b3d371b8767bf4b24422a275c4fbf5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts a 3 dB reduction and gives a valid capacitance-based explanation: doubled node capacitance halves the node noise voltage power while the swing remains unchanged. The extra trade-off discussion does not undermine the main result.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3615,
        "output_tokens": 2434,
        "total_tokens": 6049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1595,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3615,
        "output_tokens": 2434,
        "total_tokens": 6049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1595,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the problem\n\nThe circuit is a three‑stage CMOS inverter (self‑loaded) ring oscillator. Scaling both the NMOS and PMOS widths by a factor of 2 changes three things:\n\n| Quantity | Scaling with W |\n|---|---|\n| Node capacitance $C$ (mostly $C_{GS}+C_{GD}+C_{DB}$ of the devices themselves) | $\\propto W$ → $2C$ |\n| Drive current / transconductance $I_D,\\;g_m$ | $\\propto W$ → $2I_D,\\;2g_m$ |\n| Supply current (power) | $\\propto W$ → doubles |\n\n**Frequency is unchanged:** the stage delay is roughly\n\n$$t_d \\approx \\frac{C\\,\\Delta V}{I_D}\\propto \\frac{W}{W}=\\text{const}$$\n\nso $f_{osc}=1/(2Nt_d)$ stays the same (this is the usual \"self‑loading\" property of ring oscillators). The output swing is still rail‑to‑rail ($\\approx V_{DD}$).\n\n## Noise at each node\n\nEach transistor's thermal drain noise is\n\n$$\\overline{I_n^2}=4kT\\gamma g_m \\;\\propto\\; W$$\n\nbut this current sees the node impedance $|Z|\\approx 1/(\\omega C)\\propto 1/W$. The resulting **noise voltage** at the node is therefore\n\n$$\\overline{V_n^2}=\\overline{I_n^2}\\,|Z|^2\\;\\propto\\;\\frac{W}{W^{2}}=\\frac{1}{W}$$\n\nSince the carrier amplitude ($\\sim V_{DD}$) and $f_0$ did not change, the noise‑to‑carrier ratio — i.e. the phase noise — falls by the same factor of 2.\n\n(The same scaling holds for flicker noise: $\\overline{V_{n,1/f}^2}\\propto K/(WLC_{ox}f)$ referred to the gate gives a drain noise current $\\propto W/L$, and again $\\overline{V_n^2}\\propto 1/W$.)\n\n## Result\n\n$$\\boxed{\\text{Phase noise drops by a factor of 2 }(\\approx 3\\text{ dB})\\text{, at the cost of }2\\times\\text{ the power}}$$\n\nSo doubling the widths buys 3 dB of phase noise while the oscillation frequency stays the same and the power dissipation doubles — consistent with the general ring‑oscillator result\n\n$$L(\\Delta\\omega)\\;\\propto\\;\\frac{kT}{P}\\cdot\\left(\\frac{\\omega_0}{\\Delta\\omega}\\right)^{2}$$\n\ni.e. the phase‑noise × power product (the FOM) is unchanged; you are simply \"buying\" phase noise with current. (Note this conclusion assumes the nodes are loaded by the transistors themselves; if a fixed external load capacitance dominated, widening the devices would instead raise $f_0$ and the trade‑off would differ.)",
        "format": "markdown",
        "sha256": "a1b5678f19f461b3451fe2b66b6749d3f253c356de9527a2cdafb5e4f987df1d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling all device widths reduces phase noise by about 3 dB, and gives a valid scaling argument: node capacitance doubles while device noise current power doubles, yielding half the node noise-voltage power for the unchanged swing. It also correctly notes the doubled power cost.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3615,
        "output_tokens": 3074,
        "total_tokens": 6689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3615,
        "output_tokens": 3074,
        "total_tokens": 6689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up\n\nLooking into the supply pin we see a *nonlinear, switching* load, so \"small‑signal resistance\" means\n\n$$R_X=\\left(\\frac{\\partial I_{DD}}{\\partial V_{DD}}\\right)^{-1}$$\n\nevaluated around the operating point, where $I_{DD}$ is the **average** current the ring draws.\n\n**Average supply current.** In each period every one of the $n$ nodes makes one low→high transition, pulling a charge $C_LV_{DD}$ out of the supply (the high→low transitions dump their charge into ground, not back into $V_{DD}$). Hence\n\n$$I_{DD}=n\\,C_L\\,V_{DD}\\,f_{osc}$$\n\n**Frequency.** With $n$ stages, $f_{osc}=1/(2nT_D)$, and each stage charges $C_L$ through about $V_{DD}/2$ with the saturated drive current $I_D$ of the switching device:\n\n$$T_D\\approx\\frac{C_L V_{DD}/2}{I_D}\\quad\\Longrightarrow\\quad f_{osc}\\approx\\frac{I_D}{n\\,C_LV_{DD}}$$\n\nSubstituting:\n\n$$\\boxed{I_{DD}\\approx I_D}$$\n\ni.e. the average supply current simply tracks the drive current of one transistor with $V_{GS}=V_{DD}$ — the number of stages and $C_L$ drop out (they raise $f_{osc}$ and lower the per‑transition charge in compensation).\n\n## Differentiating\n\nSquare‑law device: $I_D=\\tfrac12\\mu_nC_{ox}\\frac{W}{L}(V_{DD}-V_{TH})^2$, so\n\n$$\\frac{\\partial I_{DD}}{\\partial V_{DD}}=\\mu_nC_{ox}\\frac{W}{L}\\,(V_{DD}-V_{TH})=g_m$$\n\n$$\\;R_X\\approx\\frac{1}{g_m}=\\frac{V_{DD}-V_{TH}}{2I_{DD}}\\;$$\n\n(The same result follows for a velocity‑saturated device, where $I_D\\approx WV_{sat}C_{ox}(V_{DD}-V_{TH})$ and $g_m=WV_{sat}C_{ox}$.)\n\n## Interpretation\n\n* The supply node looks like a **positive resistance equal to $1/g_m$ of a single switching transistor** — independent of $n$ and $C_L$.\n* Since $I_{DD}\\propto(V_{DD}-V_{TH})^2\\sim V_{DD}^{\\,2}$, this is roughly **half** the \"dc\" resistance:\n$$R_X\\approx\\frac{V_{DD}}{2I_{DD}}$$\n e.g. a ring drawing 1 mA from 1 V presents only ~500 Ω.\n* This low value is why a ring oscillator loads a supply regulator heavily (and why supply ripple translates so directly into frequency pushing); in practice it appears in parallel with the on‑chip decoupling capacitance at the node.",
        "format": "markdown",
        "sha256": "9d7cf2607d9df89d9f5b27ec2df906e596375f94e0972055abc1b5d3dec7fdc1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies switched-capacitor charging as the supply-current mechanism and includes the dependence of oscillation frequency on VDD through the stage delay. Under its stated square-law approximation, the resulting 1/gm is a frequency-dependent refinement that approaches 1/(6 fosc CL) for three stages when VDD is well above threshold; it is not the disallowed static-only gm argument.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3446,
        "output_tokens": 5711,
        "total_tokens": 9157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4667,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3446,
        "output_tokens": 5711,
        "total_tokens": 9157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4667,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Problem\n\nThe supply node of a ring oscillator doesn't look like a simple resistor made of channel resistances — the current drawn is the *switching* (dynamic) current, and it depends on $V_{DD}$ both directly and through the oscillation frequency. So we must compute\n\n$$R_X=\\left(\\frac{\\partial I_{DD}}{\\partial V_{DD}}\\right)^{-1}$$\n\nfor slow (quasi‑static) changes of the supply.\n\n## Step 1: Average supply current\n\nIn one period of oscillation, each of the $N$ nodes makes **one** low‑to‑high transition, and each such transition pulls a charge $C_LV_{DD}$ out of the supply (the high‑to‑low transitions dump charge to ground). Hence\n\n$$I_{DD}=N\\,C_L\\,V_{DD}\\,f_{osc}$$\n\n## Step 2: Express the frequency\n\nWith $N$ stages and a per‑stage delay $T_D$,\n\n$$f_{osc}=\\frac{1}{2NT_D},\\qquad T_D\\approx\\frac{C_L(V_{DD}/2)}{I_D}=\\frac{C_LV_{DD}}{2I_D}$$\n\nwhere $I_D$ is the (saturated) charging current of one inverter:\n\n$$I_D=\\tfrac{1}{2}\\mu C_{ox}\\frac{W}{L}\\,(V_{DD}-V_{TH})^2$$\n\n## Step 3: Combine\n\n$$I_{DD}=NC_LV_{DD}\\cdot\\frac{I_D}{NC_LV_{DD}}=I_D=\\tfrac{1}{2}\\mu C_{ox}\\frac{W}{L}(V_{DD}-V_{TH})^2$$\n\n(The supply current equals one stage's drive current — the \"$N$\" cancels, which is why $I_{DD}$ is roughly independent of the number of stages.)\n\nNote the key scaling: $f_{osc}\\propto V_{DD}$ (for $V_{TH}\\ll V_{DD}$), so $I_{DD}\\propto V_{DD}^2$.\n\n## Step 4: Differentiate\n\n$$\\frac{\\partial I_{DD}}{\\partial V_{DD}}=\\mu C_{ox}\\frac{W}{L}(V_{DD}-V_{TH})=g_m$$\n\n$$\\boxed{R_X=\\frac{1}{g_m}=\\frac{V_{DD}-V_{TH}}{2I_{DD}}\\;\\approx\\;\\frac{V_{DD}}{2I_{DD}}}$$\n\n## Interpretation\n\n* $R_X$ is **positive** (the ring speeds up and eats more current as $V_{DD}$ rises) and equals **half** the large‑signal equivalent resistance $V_{DD}/I_{DD}$ — the factor of 2 comes from the square‑law dependence $I_{DD}\\propto V_{DD}^{2}$. In general, if $I_{DD}\\propto V_{DD}^{\\alpha}$, then $R_X=V_{DD}/(\\alpha I_{DD})$.\n* Example: a ring running at $V_{DD}=1\\ \\text{V}$ and drawing $1\\ \\text{mA}$ presents $R_X\\approx 500\\ \\Omega$ to the supply.\n* This small $R_X$ is why a ring oscillator loads its supply/regulator heavily, and why supply ripple translates so directly into jitter (since $f_{osc}$ tracks $V_{DD}$).",
        "format": "markdown",
        "sha256": "c8491ccd7f9e71977722ff87ca7c0e4c930d4d0e47d62528d2aad40bffea933e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven charging of the load capacitances as the supply-current mechanism and includes frequency dependence on VDD. For the three-stage ring, its square-law approximation gives RX ≈ VDD/(2 IDD) ≈ 1/(6 fosc CL) when VTH is small, an explicitly accepted refinement of the fixed-frequency result.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3446,
        "output_tokens": 4067,
        "total_tokens": 7513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2877,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3446,
        "output_tokens": 4067,
        "total_tokens": 7513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2877,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Problem\n\nLooking into the supply node you see no *static* conductance path (the inverters' pull‑up and pull‑down devices are never both strongly on in steady state). What the supply does see is the **average switching current** of the ring, which is a function of $V_{DD}$. Hence\n\n$$R_X=\\frac{\\partial V_{DD}}{\\partial I_{DD}}$$\n\nwhere $I_{DD}$ is the average supply current. So we need $I_{DD}(V_{DD})$.\n\n## Step 1: Average supply current (charge accounting)\n\nIn one oscillation period every node of the ring makes one low→high transition, drawing $C\\,V_{DD}$ from the supply (and one high→low transition, dumping it into ground). With $N$ stages each loaded by capacitance $C$:\n\n$$I_{DD}=N\\,C\\,V_{DD}\\,f_{osc},\\qquad f_{osc}=\\frac{1}{2NT_D}\\;\\Rightarrow\\; I_{DD}=\\frac{C\\,V_{DD}}{2T_D}$$\n\n(Here $N=3$, but $N$ drops out.)\n\n## Step 2: Supply dependence of the delay\n\nEach stage charges $C$ through a transistor whose saturation current is set by $V_{GS}=V_{DD}$:\n\n$$T_D\\approx\\frac{C\\,V_{DD}}{\\tfrac12\\mu C_{ox}\\frac{W}{L}(V_{DD}-V_{TH})^2}\\cdot\\frac{1}{2}\\;\\;\\propto\\;\\;\\frac{C\\,V_{DD}}{(V_{DD}-V_{TH})^2}$$\n\nSubstituting into Step 1, the capacitance and the swing cancel:\n\n$$\\boxed{I_{DD}\\simeq\\tfrac12\\,\\mu C_{ox}\\frac{W}{L}\\,(V_{DD}-V_{TH})^2}$$\n\ni.e. the ring draws about the saturation current of **one** transistor with its gate at $V_{DD}$ — sensible, since at every instant roughly one stage is delivering current.\n\n## Step 3: Differentiate\n\n$$\\frac{\\partial I_{DD}}{\\partial V_{DD}}=\\mu C_{ox}\\frac{W}{L}(V_{DD}-V_{TH})=g_m$$\n\n$$\\;R_X=\\frac{1}{g_m}=\\frac{V_{DD}-V_{TH}}{2I_{DD}}\\;\\approx\\;\\frac{V_{DD}}{2I_{DD}}\\;$$\n\n## Equivalent forms and interpretation\n\nUsing $I_{DD}=NCV_{DD}f_{osc}$:\n\n$$R_X\\approx\\frac{1}{2NCf_{osc}}=\\frac{T_D}{C}\\approx R_{on}\\ \\text{of one inverter}$$\n\n* The supply node behaves as a **positive resistance roughly equal to the on‑resistance (1/g_m) of a single stage device** — i.e. only *half* the \"DC\" value $V_{DD}/I_{DD}$, because $I_{DD}\\propto V_{DD}^2$ (both $f_{osc}$ and the charge per cycle rise with $V_{DD}$).\n* This is a low resistance (tens to hundreds of ohms for typical rings), which is why ring oscillators load/divert supply ripple and why their frequency is so supply‑sensitive.\n* Validity: quasi‑static, i.e. for ripple frequencies well below $f_{osc}$; in parallel with it appears the decoupling capacitance of the supply node. (If instead the stages were current‑starved with a $V_{DD}$‑independent bias, then $I_{DD}\\propto V_{DD}$ and $R_X=V_{DD}/I_{DD}=2T_D/C$.)",
        "format": "markdown",
        "sha256": "aacdc5d6e4658f7da85fbb0e8f94ae142bbb1f11ff42a94b5b2959e98855ae0c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven capacitor charging as the supply-current mechanism and gives the refined result R_X ≈ 1/(2NCf_osc), or 1/(6Cf_osc) for three stages, accounting for frequency increasing with supply voltage. Minor approximation inconsistencies do not change the central result.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3446,
        "output_tokens": 6295,
        "total_tokens": 9741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3446,
        "output_tokens": 6295,
        "total_tokens": 9741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**Yes — the formula is a *dc, non‑oscillating* result, and it stops being meaningful once the ring oscillates.** Ironically, the \"two diode‑connected devices in series\" picture gives the *right* number for the (unstable) dc operating point, but it is the wrong model for an oscillating ring.\n\n---\n\n## 1. Why the formula is correct **if the ring does not oscillate**\n\nHold every node at the trip point and perturb the supply by $v_X$. By symmetry all three outputs move identically, $v_1=v_2=v_3=v$. KCL at the output of any stage (input = previous output = $v$):\n\n$$g_{mp}(v_X-v)+\\frac{v_X-v}{r_{op}}=g_{mn}v+\\frac{v}{r_{on}}$$\n\nNeglecting channel‑length modulation,\n\n$$v=\\frac{g_{mp}}{g_{mn}+g_{mp}}v_X ,\\qquad i_{X,\\text{stage}}=g_{mp}(v_X-v)=\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}v_X$$\n\nso for three stages\n\n$$R_X=\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)$$\n\nThe \"diode‑connected\" shortcut works only because, for a *common‑mode* (supply) perturbation, every gate rises by exactly the same amount as its own drain — so each device indeed looks diode‑connected. (Note that this bias point is the unstable equilibrium of the ring: it exists only if the loop is broken or the loop gain is forced below unity.)\n\n---\n\n## 2. What changes when it oscillates\n\n**(a) The devices are no longer in the high‑gain region.** In a rail‑to‑rail ring each transistor is either *off* or in *deep triode* for almost the whole cycle; the two devices are rarely on simultaneously. The quantity $1/g_{mn}+1/g_{mp}$ evaluated at the trip point simply does not describe the supply path — instantaneously that path is roughly $R_{on,p}$ (charging) or an open circuit.\n\n**(b) The circuit is periodically time‑varying and autonomous.** $R_X$ becomes a periodically time‑varying quantity; a tone injected on the supply at $\\omega_m$ produces current at $\\omega_m$ *and* at $\\omega_0\\pm\\omega_m$, etc. Worse, the dominant effect of a supply perturbation on an oscillator is **phase/frequency modulation (supply pushing)**, not a resistive current. A single number \"$R_X$\" is only meaningful as a cycle‑averaged, quasi‑static quantity.\n\n**(c) The supply current is dominated by dynamic (switching) current.** Quasi‑statically,\n\n$$I_{DD}\\approx n\\,C_L V_{DD}f_{osc},\\qquad f_{osc}=\\frac{1}{2nT_D},\\qquad T_D\\approx \\frac{C_LV_{DD}}{I_{D,\\text{on}}}$$\n\nso\n\n$$I_{DD}\\approx \\frac{I_{D,\\text{on}}}{2}\\approx \\frac{1}{4}\\mu_nC_{ox}\\frac{W}{L}(V_{DD}-V_{TH})^2\n\\;\\;\\Longrightarrow\\;\\;\nR_X=\\left(\\frac{\\partial I_{DD}}{\\partial V_{DD}}\\right)^{-1}\\approx \\frac{2}{g_m\\big|_{V_{GS}=V_{DD}}}$$\n\nTwo things to notice:\n\n* The number of stages **cancels** (because $f_{osc}\\propto 1/n$), so the $1/3$ factor disappears.\n* The relevant $g_m$ is that of a device with the *full supply* as overdrive, not the trip‑point $g_m$ — plus there is an extra contribution from the short‑circuit (crowbar) current.\n\n(For a velocity‑saturated device, $I_{D,\\text{on}}\\propto (V_{DD}-V_{TH})$, giving $R_X\\approx 2/(WC_{ox}v_{sat})$ — again $n$‑independent.)\n\n---\n\n## 3. Bottom line\n\n$R_X=\\tfrac13(1/g_{mn}+1/g_{mp})$ is the small‑signal resistance at the ring's **dc (non‑oscillating) equilibrium**. When the ring oscillates, the transistors act as switches, the impedance becomes periodically time‑varying (with frequency conversion), and the cycle‑averaged resistance is set by the large‑signal dynamic current $nC_LV_{DD}f_{osc}$ and by $\\partial f_{osc}/\\partial V_{DD}$ — numerically of the same order as $1/g_m$, but with no $1/3$ factor and no dependence on the number of stages.",
        "format": "markdown",
        "sha256": "f18e06d37141128ff7e33bfcdf39537485ecc316e319ef976b1b9a0d34d4d665"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the oscillating supply current as the rate of charging the node capacitances and estimates the resulting resistance as order 1/gm, not greatly increased by devices being off. This meets the golden solution’s full-credit rule; the added qualifications do not undermine that conclusion.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3560,
        "output_tokens": 7582,
        "total_tokens": 11142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3560,
        "output_tokens": 7582,
        "total_tokens": 11142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**Yes.** The quoted number is the small‑signal resistance of the *static* (non‑oscillating) ring, i.e. of the circuit sitting at its unstable DC equilibrium. Once the loop actually oscillates, that operating point is never occupied, the linearization is meaningless, and the resistance seen at the supply is set by large‑signal switching — it is typically **much larger**, and strictly speaking it is not even a time‑invariant resistance.\n\n---\n\n## 1. Why the formula is right *if the ring does not oscillate*\n\nIf the circuit is stable, every node settles to the common trip point $V_M$ (all three stages identical). At that point each inverter has $V_{in}=V_{out}$, so for **both** devices $V_{GS}=V_{DS}$ — they are effectively diode‑connected, and the supply current must flow *through the PMOS and then through the NMOS* of the same inverter (no gate current, no capacitor current in steady state). Hence $1/g_{mp}+1/g_{mn}$ per stage, three in parallel.\n\nIt's worth checking this with a proper loop analysis, since each gate is driven by the *previous* stage, not by its own drain. With $g_m=g_{mn}+g_{mp}$ and $r_o\\to\\infty$, KCL at stage $i$ gives\n\n$$g_{mp}(v_X-v_{i-1})-g_{mn}v_{i-1}=0 \\;\\;\\Rightarrow\\;\\; v_i \\text{ determined by } v_{i-1},v_X$$\n\nBy symmetry all nodes move together, $v_1=v_2=v_3=v$, which makes each gate ride with its own drain — exactly the diode‑connected condition. Carrying it through:\n\n$$i_X = 3\\,g_{mp}(v_X-v) = 3\\,\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}\\,v_X \n\\quad\\Rightarrow\\quad R_X=\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)$$\n\nSo the shortcut is legitimate — **for the quiescent ring only**.\n\n---\n\n## 2. What breaks when it oscillates\n\n**(a) There is no DC operating point to linearize about.** Oscillation means precisely that the equilibrium at $V_M$ is unstable; the circuit lives on a limit cycle with nearly rail‑to‑rail swings. The $g_m$'s are strongly time‑varying (each device alternates between cutoff and triode), so \"$1/g_{mn}+1/g_{mp}$ evaluated at $V_M$\" has no meaning.\n\n**(b) The current path is different.** At the trip point, $I_{DD}$ flows PMOS → NMOS (series pair). While oscillating, most of the supply current flows PMOS → **node capacitance** → (later) NMOS → ground. The PMOS and NMOS of a given stage are essentially never on simultaneously except briefly during a transition, so the \"two devices in series\" picture collapses.\n\n**(c) The supply current is dynamic.** For $n=3$ stages,\n\n$$I_{DD}\\simeq n\\,C_{node}V_{DD}f_{osc} \\;+\\; I_{\\text{short-circuit}}$$\n\nand the incremental resistance is\n\n$$R_X=\\frac{\\partial V_{DD}}{\\partial I_{DD}}$$\n\ni.e. it is governed by how the swing *and* the frequency track the supply (supply pushing). Since $f_{osc}$ itself rises roughly linearly with $V_{DD}$, $I_{DD}\\propto V_{DD}^{2}$ and $R_X\\approx V_{DD}/(2I_{DD,\\text{avg}})$. Because $I_{DD,\\text{avg}}$ is far smaller than the crowbar current $I_{SC}$ that flows at the trip point, this is typically **an order of magnitude or more larger** than $\\tfrac13(1/g_{mn}+1/g_{mp})\\sim (V_{ovn}+V_{ovp})/(6I_{SC})$.\n\n**(d) It isn't a resistance at all, rigorously.** An oscillator is a *periodically time‑varying* system. A small perturbation $v_x$ at the supply is up‑converted: it modulates the delay per stage and therefore the frequency/phase, producing sidebands around $f_{osc}$ and its harmonics. Phase is the integral of frequency (free‑running mode, pole at the origin), so the low‑frequency \"impedance\" seen at $V_{DD}$ is not an LTI one‑port — you can only speak of the average (large‑signal) $\\partial V_{DD}/\\partial I_{DD}$, or of a time‑varying/mixing impedance.\n\n---\n\n## 3. Bottom line\n\n$$R_X=\\tfrac13\\!\\left(\\tfrac{1}{g_{mn}}+\\tfrac{1}{g_{mp}}\\right)\\quad\\text{only if the ring is held (or stays) at its trip point.}$$\n\nIf it oscillates, the answer changes: the resistance is no longer $\\sim 1/g_m$ but is set by the average switching current, $R_X \\approx V_{DD}/(2 I_{DD,\\text{avg}})$ with $I_{DD,\\text{avg}}\\approx 3C_{node}V_{DD}f_{osc}$, and it is really a time‑varying impedance (the mechanism behind supply pushing and supply‑induced jitter), not a simple small‑signal resistance.",
        "format": "markdown",
        "sha256": "09a0a85ce980c9cc78f673b70215e890499af61cac3e20e007fccc5ed9501631"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the dynamic capacitive charging current, but concludes that the supply resistance becomes much larger. The key result is that the oscillation frequency scales inversely with the stage delay, so the resulting resistance remains on the order of the MOS on-resistance, not much higher than the static estimate.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3560,
        "output_tokens": 7836,
        "total_tokens": 11396,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5961,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3560,
        "output_tokens": 7836,
        "total_tokens": 11396,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5961,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nYes — the answer is no longer meaningful. The expression\n\n$$R_X=\\tfrac13\\!\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)$$\n\nis the small‑signal resistance **at the symmetric dc solution of the ring (all nodes at the inverter trip point)** — and that is precisely the operating point the circuit refuses to stay at if it oscillates.\n\n## Where the formula comes from (and why it is \"right\" in a limited sense)\n\nAt the symmetric dc solution every node sits at the trip point, both devices in every inverter are saturated, and all node voltages are equal. A perturbation $v_X$ on the supply is therefore a *common‑mode* excitation: the input of each inverter (the previous node) moves by the same amount as its own output. Each stage then behaves exactly like a self‑biased (diode‑connected) inverter:\n\n$$(g_{mp}+g_{op})(v_X-v)=(g_{mn}+g_{on})v\\;\\Rightarrow\\;\\frac{v_X}{i}=\\frac{1}{g_{mp}+g_{op}}+\\frac{1}{g_{mn}+g_{on}}$$\n\nand three of these in parallel give the quoted result (with $r_o$ neglected). Nothing is wrong with the algebra.\n\n## Why oscillation invalidates it\n\n1. **That bias point is unstable.** The very condition that makes the ring oscillate (loop gain magnitude > 1 at the frequency where the three stages give the extra 180°) is the statement that the trip‑point solution has right‑half‑plane poles. The circuit never resides there, so the $g_m$'s used in the formula never exist.\n\n2. **The devices are not in saturation.** In steady‑state oscillation each node swings nearly rail to rail. At any instant one node is near $V_{DD}$, one near ground, and one is in transition; in the settled stages one transistor is **cut off** and the other is in **triode**, so there is *no* resistive path from $V_{DD}$ to ground through those stages at all. \"$1/g_m$\" of a cut‑off or triode device is not the relevant quantity.\n\n3. **The port is periodically time‑varying, not a resistor.** The correct description is a conductance $g(t)$ with period $1/f_{osc}$, dominated by whichever stage happens to be switching. An LTI \"resistance\" simply does not exist: a perturbation applied at $\\omega_m$ on the supply does not produce only a current at $\\omega_m$ — it is up/down‑converted to $\\omega_{osc}\\pm\\omega_m$ and it modulates the oscillator's phase and frequency (supply pushing, supply‑induced phase noise).\n\n## What you actually see at node X\n\nFor slow (quasi‑dc) variations the supply current is the *switching* current, not a $g_m$ current:\n\n$$I_{DD}\\approx n\\,C_{node}V_{DD}f_{osc}\\;(+\\,\\text{short-circuit charge}),\\qquad n=3$$\n\nso an \"equivalent\" dc resistance is\n\n$$R_{X,\\rm eff}\\approx\\frac{V_{DD}}{I_{DD}}\\approx\\frac{1}{3\\,C_{node}f_{osc}},$$\n\nand the *incremental* value must include the frequency pushing,\n\n$$\\frac{\\partial I_{DD}}{\\partial V_{DD}}\\approx 3C f_{osc}+3CV_{DD}\\frac{\\partial f_{osc}}{\\partial V_{DD}},$$\n\nwhich (since $\\partial f_{osc}/\\partial V_{DD}>0$) makes the incremental resistance *smaller* than $V_{DD}/I_{DD}$. Neither of these has any simple relation to $1/g_{mn}+1/g_{mp}$.\n\n## Practical moral\n\nThe quoted result is valid only if the loop gain is too small to sustain oscillation (heavily loaded ring, low intrinsic gain) or if each inverter is deliberately self‑biased with the loop broken. For a real oscillator you cannot use a `.op`/`.ac` (dc‑bias small‑signal) analysis of the supply port; you need a periodic steady‑state + periodic AC (PSS/PAC, or transient) analysis, which returns a time‑varying/frequency‑translating supply sensitivity rather than a single resistance.",
        "format": "markdown",
        "sha256": "5f550e53066521348969d3d872342d9b3b0b377e91ff3dbf9f9c95d8e92a6fee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive switching current and gives RX ≈ 1/(3 fosc Cnode), but misses the key conclusion that this remains on the order of the MOS on-resistance or inverse transconductance. Its claim that the dynamic result has no simple relation to the static estimate is misleading.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3560,
        "output_tokens": 7447,
        "total_tokens": 11007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5978,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3560,
        "output_tokens": 7447,
        "total_tokens": 11007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5978,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the question\n\nThis is a StrongARM‑type sense‑amplifier latch:\n\n* **CK low (reset):** S₁–S₄ pull X, Y, P, Q up to V_DD and M₇ is off.\n* **CK high (sense):** M₇ turns on, and X and Y (precharged to V_DD) begin to discharge through M₃/M₄ and the input pair M₁/M₂. During this first interval M₅/M₆ are still off (|V_GS| < |V_THP|), so the circuit is simply an **integrator**, not yet a regenerative latch. The \"initial gain\" is the gain accumulated in this integration phase, before regeneration takes over.\n\n## Gain during the integration phase\n\nDifferential build‑up at X, Y:\n\n$$\\Delta V_{XY}(t)=\\frac{g_{m1,2}\\,\\Delta V_{in}}{C_X}\\,t$$\n\nCommon‑mode fall at X, Y:\n\n$$V_{X,CM}(t)=V_{DD}-\\frac{I_{D1}}{C_X}t$$\n\nRegeneration begins when the common‑mode level has dropped by about |V_THP| so that M₅/M₆ turn on:\n\n$$t_1=\\frac{C_X|V_{THP}|}{I_{D1}}$$\n\nHence the gain available at the moment the latch starts to regenerate:\n\n$$\\boxed{A_v=\\frac{g_{m1,2}t_1}{C_X}=\\frac{g_{m1,2}|V_{THP}|}{I_{D1}}=\\frac{2|V_{THP}|}{V_{GS1}-V_{TH1}}}$$\n\nNote that C_X cancels: the gain is set **only** by the input‑pair overdrive (and |V_THP|).\n\n## Effect of widening M₇\n\nM₇ operates as a switch (triode) in series with the tail. Making it wider lowers its on‑resistance, so the tail current I_SS (and hence I_D1) rises, which means the input pair's overdrive rises:\n\n$$V_{GS1}-V_{TH1}\\propto\\sqrt{I_{D1}}\\ \\Rightarrow\\ A_v\\propto\\frac{1}{\\sqrt{I_{D1}}}\\propto\\frac{1}{\\sqrt{W_7}}$$\n\n**So the initial voltage gain *decreases*.** Physically: although the larger current makes ΔV_XY grow faster (g_m rises as √I), it makes the common‑mode level at X and Y collapse even faster (linearly in I), so the latch enters regeneration sooner (t₁ ∝ 1/I_D) and less voltage gain is accumulated.\n\n**Trade‑off:** a wide M₇ gives a faster decision but lower pre‑amplification gain, which means the mismatch of the latch devices (M₃–M₆) is divided by a smaller gain and the input‑referred offset (and noise) gets worse. For low offset one wants a *small* input‑pair overdrive, i.e., a weaker tail device.",
        "format": "markdown",
        "sha256": "e57ea8603ddeeb2f7bc3c54e5d22e15ac3f917f4e59fb6d73a6641b27480a9ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening M7 increases tail current and decreases initial gain: input-pair gm rises only as the square root of current, while the integration interval shortens as current increases. This matches the essential mechanism and trend.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 4962,
        "total_tokens": 9765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3949,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 4962,
        "total_tokens": 9765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3949,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Problem\n\nWhen CK goes high, M7 turns on and the circuit leaves its reset state (X, Y, P, Q all precharged to V_DD by S₁–S₄). In the first (\"amplification\") phase:\n\n* M₃ and M₄ are **off**, because V_GS3 = V_Y – V_P = 0 and V_GS4 = V_X – V_Q = 0.\n* The input pair therefore simply **integrates** its drain currents onto the capacitances at P and Q:\n\n$$\\Delta V_{PQ}(t)=\\frac{g_{m1,2}\\,\\Delta V_{in}}{C_P}\\,t$$\n\n* The common‑mode level of P and Q falls at a rate $I_{SS}/(2C_P)$. Amplification stops (and regeneration begins) when P and Q have dropped by roughly $V_{THN}$, since at that point M₃, M₄ turn on and the cross‑coupled pairs take over:\n\n$$\\Delta T_1\\approx \\frac{C_P\\,V_{THN}}{I_{SS}/2}=\\frac{2C_PV_{THN}}{I_{SS}}$$\n\n## The Initial Gain\n\n$$A_v=\\frac{\\Delta V_{PQ}}{\\Delta V_{in}}=\\frac{g_{m1,2}\\Delta T_1}{C_P}=\\frac{2g_{m1,2}V_{THN}}{I_{SS}}=\\frac{2V_{THN}}{V_{GS1,2}-V_{TH1,2}}$$\n\nNote that $C_P$ cancels — the gain is set only by the input pair's **overdrive**.\n\n## Effect of Widening M7\n\nIncreasing W₇ raises the tail current I_SS (and lowers the tail node voltage, giving M₁–M₂ more V_GS). Then:\n\n* $g_{m1,2}\\propto\\sqrt{I_{SS}}$ (grows only as the square root), but\n* the integration window $\\Delta T_1\\propto 1/I_{SS}$ (shrinks linearly).\n\nHence\n\n$$A_v\\propto \\frac{\\sqrt{I_{SS}}}{I_{SS}}=\\frac{1}{\\sqrt{I_{SS}}}\\propto\\frac{1}{\\sqrt{W_7}}$$\n\n**The initial voltage gain *decreases*** (as roughly $1/\\sqrt{W_7}$), because the larger overdrive of M₁–M₂ and the shorter amplification time outweigh the increase in g_m. The circuit does reach its decision faster, but with less pre‑amplification the offset and noise of the latch (M₃–M₆) are referred back to the input with a larger weight.",
        "format": "markdown",
        "sha256": "7f0c06c0afad7a20e7ea2b39ff530197e733d352b22ba6d0c8a5a982e0eeb908"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening M7 increases tail current and decreases initial gain: the input-pair transconductance grows more slowly than the current shortening the integration interval. The derivation is physically consistent; minor factor conventions do not affect the result.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 5098,
        "total_tokens": 9901,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4191,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 5098,
        "total_tokens": 9901,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4191,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nIt **goes down** (and eventually flattens out). Making M₇ wider raises the tail current, which raises the input pair's overdrive and shortens the integration time — both of which reduce the pre‑amplification (initial) gain.\n\n## Why\n\nAfter CK goes high, X and Y (pre‑charged to V_DD by S₃, S₄) are discharged by the drain currents of M₁–M₂ (delivered through M₃–M₄). During this \"integration/amplification\" phase there is no resistive load — the gain comes from charge integration on C_X:\n\n$$\\Delta V_{XY}(t)=\\frac{I_{D1}-I_{D2}}{C_X}\\,t=\\frac{g_{m1,2}\\,\\Delta V_{in}}{C_X}\\,t$$\n\nThe phase ends when the common mode of X and Y has fallen by |V_THP|, because then M₅–M₆ turn on and regeneration (positive feedback), not amplification, takes over. Since each node is discharged by I_SS/2:\n\n$$T_{amp}=\\frac{2C_X\\,|V_{THP}|}{I_{SS}}$$\n\nso\n\n$$A_{v}= \\frac{g_{m1,2}}{C_X}T_{amp}=\\frac{2|V_{THP}|\\,g_{m1,2}}{I_{SS}}\\;\\approx\\;\\frac{2|V_{THP}|}{V_{GS1,2}-V_{TH1,2}}$$\n\nThe gain is set by **g_m/I_D of the input pair**, not by the absolute current.\n\n## Effect of widening M₇\n\n- Wider M₇ → smaller R_on7 → less voltage dropped at the tail node → larger V_GS of M₁–M₂ → larger I_SS.\n- Larger I_SS → larger overdrive → smaller g_m/I_D, and X, Y collapse to V_DD − |V_THP| sooner (shorter T_amp).\n- Net: A_v ∝ 1/(V_GS−V_TH)₁,₂ ∝ 1/√I_SS ∝ 1/√W₇ (square‑law) — the initial gain **falls**.\n\nOnce W₇ is large enough that M₇'s on‑resistance is negligible compared with that of M₁–M₂ (V_P ≈ 0), I_SS saturates at the value set by the input pair and the gain stops changing.\n\n**Trade‑off:** a wide M₇ makes the latch faster (quicker entry into regeneration) but gives less pre‑amplification, so the input‑referred offset and noise contributed by the latch (M₃–M₆) become larger.",
        "format": "markdown",
        "sha256": "9e565dd587f2d92eb8dafc8b6b0e6c2f170e7f1594481d48966300661f72b98c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening M7 increases tail current and reduces the input pair’s gm/ID, so the initial integration gain decreases. The additional detail does not undermine the essential explanation.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 7110,
        "total_tokens": 11913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6233,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 7110,
        "total_tokens": 11913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6233,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the problem\n\nWith $\\overline{CK}$ low (reset) $S_1$–$S_4$ are on and $P$, $Q$, $X$, $Y$ all sit at $V_{DD}$, and $M_7$ is off.\n\nWhen $CK$ goes high, the switches open and $M_7$ turns on. At this instant $M_3$ and $M_4$ are **off** ($V_{GS3}=V_Y-V_P=0$) and $M_5$, $M_6$ are off as well, so $X$ and $Y$ remain at $V_{DD}$ while $M_1$ and $M_2$ simply discharge $C_P$ and $C_Q$:\n\n$$I_{D1,2}=\\frac{I_{SS}}{2}\\pm \\frac{g_{m1,2}\\Delta V_{in}}{2}\\;\\Longrightarrow\\; |V_P-V_Q|=\\frac{g_{m1,2}\\,\\Delta V_{in}}{C_P}\\,t$$\n\nSo the input pair **integrates** the differential current on $C_P$ (= $C_Q$). This amplification phase ends when $P$ and $Q$ have fallen by about $V_{TH3,4}$, because at that point $M_3$/$M_4$ turn on and the latch takes over:\n\n$$t_1\\simeq \\frac{C_P\\,V_{TH3,4}}{I_{SS}/2}$$\n\n## The initial gain\n\nEvaluating the differential voltage at $t_1$:\n\n$$|V_P-V_Q|\\big|_{t_1}=\\frac{g_{m1,2}\\Delta V_{in}}{C_P}\\cdot\\frac{C_P V_{TH3,4}}{I_{SS}/2}\n=\\frac{2g_{m1,2}V_{TH3,4}}{I_{SS}}\\,\\Delta V_{in}$$\n\n$$\\boxed{A_{v,\\text{initial}}\\approx \\frac{2g_{m1,2}}{I_{SS}}\\,V_{TH3,4}=\\frac{g_{m1,2}}{I_{D1}}V_{TH3,4}}$$\n\n**$C_P$ has cancelled out.** Raising the capacitance at $P$ and $Q$ lowers the *slope* of the differential build‑up by the same factor that it lengthens the integration time $t_1$, so the gain obtained by the time the latch kicks in is unchanged.\n\n## Consequences\n\n- **Gain:** essentially unaffected (to first order). It is set only by $g_m/I_D$ of the input pair and by $V_{TH}$ of $M_3$/$M_4$ — e.g., it improves if the input devices are biased in weak inversion (larger $g_m/I_D$) or if $V_{TH3,4}$ is raised.\n- **Speed:** degrades directly, since $t_1\\propto C_P$ — the comparator needs a longer clock phase before regeneration starts.\n- **Power:** increases, because $C_P$ (and $C_Q$) must be charged back to $V_{DD}$ every cycle ($\\sim C_PV_{DD}^2$ per comparison).\n- **Second‑order effect:** during the next phase the extra signal that $M_1$, $M_2$ keep pumping into $P$, $Q$ grows as $g_{m1,2}\\Delta V_{in}t/C_P$, so a larger $C_P$ actually *slightly reduces* the pre‑regeneration gain.\n\n**Conclusion:** increasing $C_P$ and $C_Q$ buys no extra gain — it only makes the comparator slower and more power hungry (and, if anything, marginally reduces the gain).",
        "format": "markdown",
        "sha256": "c3fd669513057004fa1d32d2fc47e98938defeecb3986a0194dff317e8c464fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The main derivation correctly shows that the longer amplification interval cancels the reduced voltage slope, leaving the initial gain essentially unchanged. However, the answer then claims larger capacitance marginally reduces the pre-regeneration gain, which contradicts that result and the stated capacitance independence.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4804,
        "output_tokens": 8960,
        "total_tokens": 13764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4804,
        "output_tokens": 8960,
        "total_tokens": 13764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nThe pre‑regeneration (\"initial\") gain **goes up** – roughly in proportion to C_P – but the latch gets correspondingly **slower**.\n\n## Why\n\nRecall the three phases after CK goes high (S₁–S₄ have precharged X, Y, P, Q to V_DD):\n\n**Phase 1 – integration on C_P,Q.** M₃–M₆ are still off (V_GS3 = V_Y – V_P ≈ 0), so M₁–M₂ simply discharge P and Q:\n\n$$t_1 \\approx \\frac{C_P\\,V_{TH3}}{I_{D1}},\\qquad \n\\Delta V_{PQ}(t_1)=\\frac{g_{m1,2}\\Delta V_{in}}{C_P}\\,t_1=\\frac{g_{m1,2}V_{TH3}}{I_{D1}}\\Delta V_{in}$$\n\nNote that ΔV_PQ itself does **not** depend on C_P, but the *differential charge* stored there does:\n\n$$\\Delta Q = C_P\\,\\Delta V_{PQ} = g_{m1,2}\\Delta V_{in}\\,t_1 \\;\\propto\\; C_P$$\n\ni.e. a bigger C_P keeps M₃/M₄ off longer and lets the input pair integrate the signal current for a longer time.\n\n**Phase 2 – transfer to X, Y.** When V_P (and a bit later V_Q) falls one V_TH below V_DD, M₃ and M₄ turn on and convey that stored differential charge to the output nodes, and the pair keeps integrating on C_X,Y until M₅/M₆ turn on:\n\n$$\\Delta V_{XY}\\Big|_{\\text{onset of regeneration}} \\approx \\underbrace{\\frac{\\Delta Q}{C_X}}_{\\text{from phase 1}}+\\underbrace{\\frac{g_{m1,2}\\Delta V_{in}}{C_X}t_2}_{\\text{phase 2}}\n=\\frac{g_{m1,2}}{I_{D1}}\\left[V_{TH3}\\frac{C_P}{C_X}+|V_{THP}|\\right]\\Delta V_{in}$$\n\nSo\n\n$$A_v \\approx \\frac{g_{m1,2}}{I_{D1}}\\Big(V_{TH3}\\frac{C_{P,Q}}{C_{X,Y}}+|V_{THP}|\\Big)$$\n\n**Conclusion:** increasing the capacitance at P and Q raises the gain that precedes regeneration (roughly as C_P/C_X), which is why extra capacitance is sometimes deliberately added there — the higher gain also suppresses the offset and noise contributed by the regenerative (M₅/M₆) stage.\n\n**Price paid:** t₁ ∝ C_P, so the clock‑to‑output delay grows and the energy per comparison increases; if C_P is made too large, P and Q may not fall far enough within the clock phase, so the gain/speed trade‑off sets the practical limit.",
        "format": "markdown",
        "sha256": "3ea197f9e31115e88f1c04e284b073c9558f240eab6e393225b5eeabb321c79b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly notes that increasing C_P lengthens the discharge interval and that the differential voltage across P and Q cancels the capacitance dependence. But it then incorrectly adds a capacitance-proportional charge-transfer contribution and concludes the initial gain increases; the gain asked about remains essentially unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4804,
        "output_tokens": 10255,
        "total_tokens": 15059,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9230,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4804,
        "output_tokens": 10255,
        "total_tokens": 15059,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9230,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the problem\n\nWhen CK is low, S₁–S₄ precharge P, Q, X and Y to V_DD and M₇ is off. When CK goes high, S₁–S₄ turn off and M₇ turns on. At this instant:\n\n* X and Y are **floating at V_DD** (M₅, M₆ have V_GS = 0 ⇒ off).\n* M₃ and M₄ also have V_GS = V_X – V_P = 0 ⇒ off.\n\nSo in the first phase the circuit is simply the differential pair M₁–M₂ discharging the capacitors at P and Q — i.e. it acts as an **integrator**:\n\n**Common‑mode (discharge) rate:**\n\n$$V_{P,CM}(t)=V_{DD}-\\frac{I_{SS}}{2C_P}\\,t$$\n\n**Differential signal built up:**\n\n$$\\Delta V_{PQ}(t)=\\frac{g_{m1,2}\\,\\Delta V_{in}}{C_P}\\,t$$\n\n## When does this phase end?\n\nM₃ and M₄ (and hence the latch) turn on when P and Q have fallen by about one threshold:\n\n$$V_{DD}-\\frac{I_{SS}}{2C_P}t_1 = V_{DD}-V_{TH3,4}\\;\\;\\Rightarrow\\;\\;t_1=\\frac{2C_PV_{TH}}{I_{SS}}$$\n\n## The \"initial gain\"\n\n$$A_v=\\frac{\\Delta V_{PQ}(t_1)}{\\Delta V_{in}}=\\frac{g_{m1,2}}{C_P}\\cdot\\frac{2C_PV_{TH}}{I_{SS}}=\\frac{2g_{m1,2}V_{TH}}{I_{SS}}\n=\\frac{2V_{TH}}{V_{GS1,2}-V_{TH1,2}}$$\n\n**C_P cancels out.**\n\n## Answer\n\nIncreasing the capacitance at P and Q does **not** change the initial (pre‑amplification) gain. A larger C_P makes the differential voltage grow more slowly, but it slows the common‑mode discharge by exactly the same factor, so M₃/M₄ (and then M₅/M₆) turn on later — by which time the same amount of amplification, ≈ 2V_TH/(V_GS–V_TH), has accumulated.\n\nThe only penalty is **speed**: the integration interval t₁ = 2C_PV_TH/I_SS grows linearly with C_P, so the comparator takes longer to reach the regeneration point (and if the clock half‑period is too short, the latch may not have enough time to resolve). To raise the initial gain one must instead increase g_m/I_SS (smaller overdrive) or the threshold at which the latch kicks in — not the node capacitance.",
        "format": "markdown",
        "sha256": "bed64486fcf8e7127f6f242cb898bfc647ad86eb211113ab6e5ce285e60bb2bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is essentially unchanged and shows that the larger capacitance slows differential buildup and common-mode discharge proportionally, so capacitance cancels. It also correctly notes the speed penalty.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4804,
        "output_tokens": 5311,
        "total_tokens": 10115,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4804,
        "output_tokens": 5311,
        "total_tokens": 10115,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nBeyond a (fairly small) optimum, **the speed gets worse** – the self‑loading of M₅–M₆ grows faster than the transconductance they add.\n\n## Why\n\nAfter CK goes high, M₇ turns on, the input pair steers current into P and Q, X and Y begin to fall, and once M₃–M₄ and M₅–M₆ turn on the circuit becomes a cross‑coupled latch. Its regeneration is governed by\n\n$$\\tau_{reg}=\\frac{C_{X,Y}}{G_m}=\\frac{C_{X,Y}}{g_{m3,4}+g_{m5,6}},\\qquad \n\\Delta V_{out}(t)=\\Delta V_0\\,e^{t/\\tau_{reg}}$$\n\nso the decision time is $t\\simeq\\tau_{reg}\\ln\\!\\big(V_{logic}/\\Delta V_0\\big)$.\n\nNow look at what widening M₅,₆ by a factor $m$ does to the two terms:\n\n* **Transconductance:** the branch current is set by the tail device M₇, not by M₅,₆. With $I_D$ fixed,\n$$g_{m5,6}=\\sqrt{2\\mu_pC_{ox}(W/L)_{5,6}I_D}\\ \\propto\\ \\sqrt{m}$$\n\n* **Capacitance at X and Y:** node X carries $C_{DB5}+C_{GD5}+C_{GS6}$ (and Y the mirror image), all of which scale **linearly**:\n$$C_{X,Y}\\ \\propto\\ m$$\n\nHence\n\n$$\\tau_{reg}\\propto \\frac{m}{\\sqrt{m}}=\\sqrt{m}\\ \\uparrow$$\n\ni.e. the latch regenerates more slowly, not faster.\n\nTwo secondary effects push in the same direction:\n\n1. **Smaller initial imbalance.** During the integration phase $\\Delta V_0\\approx (g_{m1,2}\\,\\Delta V_{in}/C_{X,Y})\\,t_{int}$. A bigger $C_{X,Y}$ gives a smaller $\\Delta V_0$, so the latch needs *more* regeneration time constants to reach a full level.\n2. **Slower/heavier reset.** S₃, S₄ (and the precharge of X, Y) must now charge a larger capacitance each cycle, lengthening the reset phase and raising power, kickback and clock feedthrough.\n\n## The caveat\n\nIf M₅,₆ start out very narrow ($g_{m5,6}\\ll g_{m3,4}$ and their caps are a small part of $C_{X,Y}$), a modest increase *does* help, because $G_m$ rises while $C_{X,Y}$ barely changes. Writing $C_{X,Y}=C_0+kW$ and $G_m=g_{m3,4}+a\\sqrt{W}$, $\\tau_{reg}$ first falls and then rises, so there is an optimum width. In practice M₅,₆ are kept just large enough to add useful $G_m$ (and to pull the high node fully to $V_{DD}$); making them wider than that **degrades the speed**.",
        "format": "markdown",
        "sha256": "cf6704af28f52026e75b946a3f8ef2f80b2041c2bb522c5eb30fbf79f332727f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the correct nonmonotonic trend: widening initially strengthens regeneration and improves speed, while added node capacitance eventually limits the benefit and can slow the latch beyond an optimum. Its emphasis on post-optimum degradation is consistent with that conclusion.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4800,
        "output_tokens": 4010,
        "total_tokens": 8810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4800,
        "output_tokens": 4010,
        "total_tokens": 8810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nIt **degrades** (except possibly for a very small initial widening, if C_X is dominated by an external load). Making M5/M6 wider buys you very little latch transconductance per unit of added capacitance, and the capacitance penalty is paid in *every* phase of the operation.\n\n## Why\n\n**1. Before regeneration, M5–M6 are only capacitors.**\n\nWhen CK goes high, S₁–S₄ open, M₇ turns on, and X and Y (precharged to V_DD) begin to fall through M₃/M₄. At this point both PMOS devices have |V_GS| ≈ 0 and are **off** — they contribute *no* transconductance, only capacitance at X and Y.\n\nWith X and Y discharging at a rate I_D/C_X while the differential grows as\n\n$$\\Delta V_{X,Y}\\approx \\frac{g_{m1,2}\\,\\Delta V_{in}}{C_X}\\,t ,$$\n\nthe *differential* voltage available when the nodes have dropped enough to start the latch is independent of C_X, but the **time** needed to get there is proportional to C_X. So larger W₅,₆ simply postpones the start of regeneration.\n\n**2. During regeneration the benefit is self-cancelling.**\n\nOnce the latch kicks in, the regeneration time constant of the cross-coupled inverters is\n\n$$\\tau_{reg}=\\frac{C_X}{g_{mN}+g_{mP}},\\qquad \nC_X = C_0 + c_P W_P,\\qquad g_{mP}= k\\,W_P$$\n\nwhere C₀ is the fixed part (M₃/M₄ gate and junction caps, S₃/S₄, output load). Then\n\n$$\\frac{\\partial \\tau_{reg}}{\\partial W_P}\\propto c_P\\,g_{mN}-k\\,C_0 .$$\n\n* If C₀ is large (heavy external load on X, Y), a modest increase in W₅,₆ can help.\n* Once M₅/M₆ dominate C_X, τ_reg *increases* with W_P, and in the limit\n\n$$\\tau_{reg}\\rightarrow \\frac{c_PW_P}{kW_P}=\\frac{C_{gs,P}}{g_{mP}}\\approx\\frac{1}{\\omega_{T,P}},$$\n\ni.e. you asymptote to the **PMOS intrinsic time constant**, which, because of the lower hole mobility, is worse than what the NMOS half of the latch can give. Widening PMOS devices is therefore an inefficient way to speed up the latch.\n\n**3. Side effects.** Wider M₅/M₆ also mean larger reset switches/longer precharge of X and Y, more kickback into the inputs, and greater sensitivity of the offset to PMOS mismatch.\n\n## Design implication\n\nKeep M₅/M₆ relatively small — just wide enough to pull the winning node to V_DD within the clock phase. The regeneration speed should be obtained mainly from the NMOS pair M₃/M₄ (higher g_m/C), and C_X should be kept as small as possible.",
        "format": "markdown",
        "sha256": "819518d0dbdc74dc4726d0f62849056a3c3411c3be81113ba7650dd47b3024bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer recognizes that wider M5/M6 increase regenerative transconductance as well as node capacitance, and that capacitance can eventually limit speed. But it makes degradation the main conclusion and recommends keeping them small; the golden solution says the regeneration benefit dominates initially, with slowing only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4800,
        "output_tokens": 6592,
        "total_tokens": 11392,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5567,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4800,
        "output_tokens": 6592,
        "total_tokens": 11392,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5567,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nBoth effects are at work, so the answer is \"it depends — and in practice it usually degrades.\"\n\nWidening M5/M6 raises the latch transconductance **and** the capacitance at X and Y by (roughly) the same factor, so the regeneration time constant barely improves; meanwhile the extra capacitance unambiguously slows the *pre‑regeneration* (integration) and the *reset* phases. Beyond a fairly modest size, the net speed gets worse.\n\n## Why\n\nThe latch goes through three phases after CK rises:\n\n**1. Discharge / integration of X and Y.** M7 turns on, M1–M2 pull P and Q down, then M3–M4 begin to discharge X and Y from V_DD. During this time M5 and M6 are still off (|V_GS| < |V_THP|), so they contribute **only capacitance**. Wider M5/M6 ⇒ larger C_X, C_Y ⇒ X and Y fall more slowly and the differential voltage ΔV that is handed to the latch builds up more slowly. Pure loss.\n\n**2. Regeneration.** Once X (or Y) drops below V_DD − |V_THP|, the PMOS pair joins the positive‑feedback loop:\n\n$$\\tau_{reg}=\\frac{C_{X,Y}}{g_{m3,4}+g_{m5,6}}$$\n\nWriting $C_{X,Y}=C_0+\\alpha W_{5,6}$ and $g_{m5,6}=\\beta W_{5,6}$,\n\n$$\\tau_{reg}=\\frac{C_0+\\alpha W}{g_{mN}+\\beta W},\\qquad \n\\frac{d\\tau}{dW}<0 \\;\\Leftrightarrow\\; \\beta C_0>\\alpha g_{mN}\\;\\Leftrightarrow\\;\\omega_{T,P}>\\frac{g_{mN}}{C_0}$$\n\nSo widening helps **only** as long as the node capacitance is dominated by the *other* contributions (M3/M4, the reset switches S₃/S₄, the following SR latch/interconnect). As soon as M5/M6 dominate C_X, τ_reg saturates at ≈ 1/ω_T of the **PMOS**, which is 2–3× worse than that of an NMOS. Hence there is an optimum width, and it is not large.\n\n**3. Reset.** When CK goes low, S₃/S₄ must precharge X, Y (and S₁/S₂ precharge P, Q) back to V_DD. Bigger M5/M6 means more charge to move ⇒ longer reset time, i.e. a lower maximum clock rate. Again a pure loss (and more clock/kickback capacitance, and more dynamic power).\n\n## Practical conclusion\n\n- Starting from very small M5/M6, a modest increase can shorten the regeneration phase (more loop g_m with still‑dominant fixed capacitance).\n- Past the optimum given by $\\omega_{T,P}\\approx g_{mN}/C_0$, the self‑loading wins: phases 1 and 3 get slower, phase 2 stops improving, and the overall comparator delay (and the minimum clock period) **increases**.\n\nThat is why in StrongARM‑type latches the cross‑coupled PMOS devices are kept relatively small, and the \"muscle\" is put in M1–M2, M3–M4, and the tail device M7.",
        "format": "markdown",
        "sha256": "81fe8d771fdc570514e47fc785776b4cea2809a3b5017f704ca27cd31bb46668"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that stronger regeneration can help at small widths and that added capacitance eventually limits the benefit, but its main conclusion—that widening usually degrades speed—reverses the golden solution’s initial trend. The golden answer says regeneration strengthens enough to improve speed initially, with degradation only possible at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4800,
        "output_tokens": 4882,
        "total_tokens": 9682,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3753,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4800,
        "output_tokens": 4882,
        "total_tokens": 9682,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3753,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Looking at what the clocked devices do\n\nEach stage is a clocked (tri‑state) CMOS inverter: the input device (M₁, or its PMOS counterpart) is **stacked in series** with a device driven by CK or $\\overline{CK}$, and the *clocked* transistor is the one whose drain sits directly on the output node (X or Y).\n\nSo widening the clocked transistors has two opposite effects:\n\n**Favourable effect — lower series resistance**\n\n$$R_{\\rm on,CK}\\;\\propto\\;\\frac{1}{W_{\\rm CK}}$$\n\nThe total pull‑up/pull‑down resistance $R_{1}+R_{\\rm CK}$ drops, so X and Y can be charged/discharged with more current.\n\n**Unfavourable effects — more capacitance**\n\n* The clocked transistor's own drain junction capacitance and gate–drain overlap capacitance appear **directly at the output node**: $C_X = C_0 + \\alpha W_{\\rm CK}$.\n* Its gate capacitance loads the CK/$\\overline{CK}$ lines, so the clock buffers must be enlarged (more power) or the clock edges become slower — and slow clock edges are exactly what hurts a C²MOS latch (both stacks partially on, poor isolation).\n\n## The trade‑off\n\n$$\\tau \\;\\approx\\;\\Big(R_1+\\frac{K}{W_{\\rm CK}}\\Big)\\big(C_0+\\alpha W_{\\rm CK}\\big)\n= R_1C_0+K\\alpha+\\underbrace{R_1\\alpha W_{\\rm CK}}_{\\text{grows}}+\\underbrace{\\frac{KC_0}{W_{\\rm CK}}}_{\\text{falls}}$$\n\n$$\\frac{d\\tau}{dW_{\\rm CK}}=0\\;\\Rightarrow\\;W_{\\rm CK,opt}=\\sqrt{\\frac{KC_0}{R_1\\alpha}}$$\n\n## Answer\n\nThere is an **optimum width**, not a monotonic trend. Starting from a small value, widening the clocked transistors *improves* speed because the series resistance of the stack falls. Beyond the optimum, the extra drain capacitance they dump on nodes X and Y (plus the heavier load they present to the clock drivers) outweighs the resistance reduction, and the speed **degrades** — while power and clock‑buffer size keep rising. In practice the clocked devices are made comparable to (not much larger than) the input devices.",
        "format": "markdown",
        "sha256": "85efab2c46079ac7f79ad2a1093d6e2dc0503ee3ce5a7a08229d078a3c45c378"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing the clocked transistors’ on-resistance, while added capacitance eventually limits or reverses the benefit, giving an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 2421,
        "total_tokens": 4641,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1586,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 2421,
        "total_tokens": 4641,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1586,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the question\n\nEach stage here is a clocked (C²MOS) inverter: the input device (M₁ and its PMOS counterpart) is **in series** with a clock device. When a stage is \"on,\" the node X (or Y) is pulled up or down through *two* series transistors, so the equivalent output resistance is\n\n$$R_{out}\\;\\approx\\;R_{in}+R_{CK}\\;=\\;\\frac{1}{\\mu C_{ox}(W/L)_{in}(V_{GS}-V_{TH})}+\\frac{1}{\\mu C_{ox}(W/L)_{CK}(V_{GS}-V_{TH})}$$\n\nand the time constant at X is $\\tau = (R_{in}+R_{CK})\\,C_X$.\n\nThe capacitance at X consists of\n\n* the **drain junction + overlap capacitance of the clock devices themselves** (they sit right at X/Y),\n* the gate capacitance of the next stage,\n* wiring capacitance.\n\nSo widening the clock transistors does two opposite things:\n\n$$\\tau=\\Big(R_{in}+\\frac{k}{W_{CK}}\\Big)\\big(C_0+\\alpha W_{CK}\\big)$$\n\n## The trade‑off\n\n* **Benefit:** $R_{CK}\\propto 1/W_{CK}$ falls, so the stage drives its load harder.\n* **Penalty:** the clock devices add their own drain capacitance to X and Y (self‑loading), and they add gate capacitance to the CK/$\\overline{CK}$ lines, which forces a bigger clock buffer, slows the clock edges, and burns more power.\n\nDifferentiating:\n\n$$\\frac{d\\tau}{dW_{CK}}=\\alpha R_{in}-\\frac{kC_0}{W_{CK}^{2}}=0\\quad\\Rightarrow\\quad W_{CK,opt}=\\sqrt{\\frac{kC_0}{\\alpha R_{in}}}$$\n\n## Answer\n\n**Neither monotonically — there is an optimum.** Starting from a narrow device, increasing the width of the clocked transistors *improves* speed because the drop in series resistance dominates. Beyond the optimum width, the extra drain capacitance they dump on X and Y (plus the heavier load they present to the clock, which degrades the clock rise/fall times and raises clock power) *degrades* the speed. In practice the clock devices are made comparable to, or somewhat smaller than, the input devices, and are placed closest to the supply rails (farthest from the output node) when possible so their junction capacitance does not appear directly at X and Y.",
        "format": "markdown",
        "sha256": "e2c736362325b8a3976d05913c029c8296306c3807b212e21541053d41325940"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says widening initially improves speed by reducing the clocked devices’ on-resistance, while added latch-node capacitance eventually limits or reverses the benefit, giving an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 2338,
        "total_tokens": 4558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1472,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 2338,
        "total_tokens": 4558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1472,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the clocked devices do\n\nEach stage is a C²MOS (clocked‑CMOS) inverter: the input device (M₁ or the top PMOS) is in **series** with a clock switch whose drain is tied directly to the output node (X or Y). When the stage is transparent, the node is charged/discharged through the series combination\n\n$$t_{pd}\\;\\approx\\;\\big(R_{in}+R_{CK}\\big)\\,C_{X}$$\n\nwhere $R_{CK}\\propto 1/W_{CK}$ and $C_X$ contains the drain junction capacitance of the clock switch plus the gate capacitance of the next stage.\n\n## The two competing effects\n\n**Helps:** Widening the clocked transistors lowers $R_{CK}$, so the stack drives X (or Y) harder.\n\n**Hurts:**\n1. The clock device's **drain/junction capacitance sits right on the critical node** X or Y, so $C_X$ grows roughly linearly with $W_{CK}$ — classic self‑loading.\n2. The **gate capacitance seen by CK and $\\overline{CK}$** grows, so the clock buffer must be larger (more power) and, if it isn't, the clock edges become slower — which directly slows a C²MOS latch (longer \"both‑devices‑partially‑on\" interval).\n3. More $C_{GD}$ from the switch to the storage node ⇒ more **clock feedthrough/charge injection** onto the floating node during the hold phase, eroding the stored level.\n\n## Where the optimum is\n\nWriting $R_{CK}=k/W$ and $C_X = C_0+\\alpha W$:\n\n$$t_{pd}=\\Big(R_{in}+\\frac{k}{W}\\Big)(C_0+\\alpha W)\n\\;\\Rightarrow\\;\n\\frac{dt_{pd}}{dW}=\\alpha R_{in}-\\frac{kC_0}{W^2}=0$$\n\n$$W_{opt}=\\sqrt{\\frac{k\\,C_0}{\\alpha R_{in}}}$$\n\n## Answer\n\n**Not monotonic — there is an optimum.** Increasing the width of the clocked transistors helps only up to a point: for small widths the reduction in on‑resistance dominates and the divider gets faster, but beyond $W_{opt}$ the added junction capacitance at X and Y (and the heavier load on the clock, with its attendant power penalty and slower clock edges) dominates, and the maximum operating frequency **degrades**. In practice the clock switches are made only moderately wider than minimum, and one usually gets more speed by widening the *input* devices or shrinking the load, not by indiscriminately widening the clocked devices.",
        "format": "markdown",
        "sha256": "3a1a98a93be224a103a1df1e06102249761c29307e78b091262069b14484f71a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening the clocked devices initially improves speed by reducing their on-resistance, while added capacitance at the latch nodes eventually limits or reverses the benefit. The extra clock-loading discussion does not contradict the essential answer.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 3390,
        "total_tokens": 5610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2498,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 3390,
        "total_tokens": 5610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2498,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**Yes — in principle.** The two latch outputs **X** and **Y** (or **Z**) are 90° apart at the divided frequency, because the two clocked stages are driven by opposite clock phases.\n\n## Why\n\nThe circuit is a master–slave ÷2: two C²MOS (clocked‑CMOS) inverters in a loop closed by the inverting buffer Inv₃.\n\n- **Left stage** (PMOS gate = $\\overline{CK}$, NMOS gate = $CK$): conducts only when **CK = 1** → $X = \\bar Z$, and *holds* X when CK = 0.\n- **Right stage** (PMOS gate = $CK$, NMOS gate = $\\overline{CK}$): conducts only when **CK = 0** → $Y = \\bar X$, and *holds* Y when CK = 1.\n- $Z=\\bar Y$ closes the loop with an inversion → division by 2.\n\nTaking CK with period $T$ (high in $[0,T/2)$):\n\n| interval | CK | X | Y | Z |\n|---|---|---|---|---|\n| $[0,T/2)$ | 1 | **1** (=\\bar Z) | 1 (held) | 0 |\n| $[T/2,T)$ | 0 | 1 (held) | **0** (=\\bar X) | 1 |\n| $[T,3T/2)$ | 1 | **0** | 0 (held) | 1 |\n| $[3T/2,2T)$ | 0 | 0 (held) | **1** | 0 |\n\nSo the output period is $2T$ (÷2), X changes only on the **rising** edges of CK and Y only on the **falling** edges. The two outputs are therefore separated by $T/2$, which is\n\n$$\\frac{T/2}{2T}\\times 360^\\circ = 90^\\circ .$$\n\nX and Y (and hence X and Z) are quadrature waveforms at $f_{in}/2$, each with 50 % duty cycle.\n\n## Practical caveats\n\n1. **Duty‑cycle sensitivity:** the I/Q spacing equals the *high* time of CK. Any duty‑cycle error of the input clock appears directly as quadrature phase error (unlike a differential CML ÷2 driven by sinusoids, which is more tolerant).\n2. **Unequal paths/loading:** X drives two MOS gates of the second stage while Y drives Inv₃; the different delays and loads skew the 90° relation. Using Z as the second output adds Inv₃'s delay on top of the $T/2$ spacing.\n3. **Single‑ended outputs:** only two of the four quadrature phases (I and Q) are available; obtaining $\\bar I,\\bar Q$ requires extra inverters, which add further mismatch/skew.\n4. Being a (partly) dynamic/clocked topology, it also needs a minimum clock frequency and rail‑to‑rail CK and $\\overline{CK}$ with little skew between them.",
        "format": "markdown",
        "sha256": "f63da8d7a6c383cd370b21478070a53b5a225aabc4575368b468af25d54e19c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the latches switching on opposite clock phases, and explains both departures from exact quadrature: Inv₃ delay and unequal loading of the latch outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2201,
        "output_tokens": 4158,
        "total_tokens": 6359,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3176,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2201,
        "output_tokens": 4158,
        "total_tokens": 6359,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3176,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nYes — in principle. The two latch outputs, **X** and **Y** (and hence **Z**), are separated by half an *input* clock period, which is a quarter of the *output* period, i.e. 90°. But the quadrature accuracy of this particular implementation is poor.\n\n## Why the 90° relationship exists\n\nThe circuit is a master–slave flip‑flop built from two clocked (tri‑state) inverters, with the slave output inverted by Inv₃ and fed back to the master input → a ÷2 stage.\n\n- **Left (master) stage:** series PMOS gated by $\\overline{CK}$, series NMOS by $CK$ → transparent when $CK = 1$, holds (dynamically, on the capacitance of node X) when $CK = 0$.\n- **Right (slave) stage:** the clock polarities are swapped → transparent when $CK = 0$.\n\nSo:\n\n| event | node |\n|---|---|\n| rising edge of CK | X updates ( $X \\to \\overline{Z}$ ) |\n| falling edge of CK | Y updates ( $Y \\to \\overline{X}$ ) |\n\nWith input period $T$, the output period is $2T$. X changes on rising edges and Y changes on falling edges, i.e. **X and Y are offset in time by $T/2$**, which equals $2T/4$ = one quarter of the output period = **90°** (plus the trivial 180° from the inversion, so $Y$ is $\\overline{X}$ shifted by 90°, and $Z \\approx X$ shifted by 90°).\n\n## Why it is not a *good* quadrature generator\n\n1. **Unequal paths/loading.** The I output is taken at X (a dynamic node driving the slave's input), while the Q output must be taken at Y or Z. The delay of Inv₃ and the different capacitive loading of X and Y add directly to (or subtract from) the $T/2$ spacing, producing phase error.\n2. **Duty‑cycle sensitivity.** The 90° spacing is exactly $T/2$ only if CK has a 50% duty cycle; any duty‑cycle error of the input clock appears directly as I/Q phase error (unlike a differential CML divider driven by a ÷2 of a 2f₀ clock, this topology cannot \"self‑correct\").\n3. **Single‑ended, rail‑to‑rail nodes.** Rise/fall asymmetry of these CMOS inverters, CK/$\\overline{CK}$ skew, and supply/ground noise all translate into phase mismatch; there is no differential symmetry to cancel them.\n4. **Dynamic operation.** Nodes X and Y are held only by charge storage, so at low frequencies leakage corrupts the levels (and hence the edge positions).\n\n**Conclusion:** the topology inherently contains the two quadrature phases (master and slave outputs), and for modest requirements it can be used that way, but for accurate I/Q generation one normally uses a symmetric (e.g., CML/latch‑based differential) ÷2 with identically loaded outputs and a well‑controlled 50% duty‑cycle clock.",
        "format": "markdown",
        "sha256": "bc2ca9931d97e5ccb35d4eb28ffa1d516c344f69d2ebf8db2147267dedd98788"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from latch transitions half an input period apart, and explains both the Inv3 delay and unequal latch loading that prevent exact quadrature. The additional caveats do not undermine the central answer.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2201,
        "output_tokens": 3489,
        "total_tokens": 5690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2461,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2201,
        "output_tokens": 3489,
        "total_tokens": 5690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2461,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer: Yes — nodes X and Y (or X and Z) are in quadrature, *if* CK has a 50 % duty cycle and the two nodes see equal loading.\n\n## Why\n\nThe circuit is a master–slave ÷2 built from two clocked‑CMOS (C²MOS) \"latches,\" with the slave output inverted (Inv₃) and returned to the master input:\n\n* **Master (left stack):** PMOS gated by $\\overline{CK}$ and NMOS gated by $CK$ → it is *transparent* when $CK = 1$, and node X floats (dynamic hold) when $CK = 0$. Its input is Z.\n* **Slave (right stack):** PMOS gated by $CK$, NMOS gated by $\\overline{CK}$ → transparent when $CK = 0$, holding when $CK = 1$. Its input is X, its output Y.\n* Feedback: $Z=\\overline{Y}$ drives the master, so $X \\rightarrow \\overline{X}$ once per input cycle ⇒ ÷2 operation.\n\n**Edge timing.** Since the master is transparent only while $CK$ is high, **X changes only on the rising edges of CK**. Since the slave is transparent only while $CK$ is low, **Y changes only on the falling edges of CK**.\n\nWith $T$ = input clock period:\n\n| time | 0 | T/2 | T | 3T/2 | 2T |\n|---|---|---|---|---|---|\n| X | ↑ | — | ↓ | — | ↑ |\n| Y | — | ↓ | — | ↑ | — |\n\nEach output toggles once per input period, so both are **50 %-duty square waves of period 2T** (half-rate). The X and Y edges are separated by $T/2$, which is **one quarter of the output period**, i.e. a **90° phase shift**. ($Z=\\overline{Y}$ therefore lags X by 90°.)\n\n## Practical caveats\n\n1. **Duty-cycle sensitivity:** if the high time of CK is $T/2+\\Delta$, the I/Q error is $\\Delta/(2T)\\times360^\\circ = 180^\\circ\\,\\Delta/T$ — a 1 % duty-cycle error gives ~1.8° of quadrature error.\n2. **Dynamic nodes:** X and Y are high-impedance for half of every cycle. Clock feedthrough through the gate–drain overlap capacitances and subthreshold leakage can corrupt the waveforms, so the circuit fails at very low frequencies and the outputs must be buffered.\n3. **Matched loading:** X drives the slave's PMOS/NMOS gates (plus any buffer) while Y drives Inv₃ (plus its buffer); unequal loading (or taking one output as X and the other as Z, which adds Inv₃'s delay) introduces systematic phase error.",
        "format": "markdown",
        "sha256": "e37160edaeb73abf9441a6e58d1535ee5fe04af707b88baee1e8ced1299265c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from latches switching on opposite clock phases, and explains both departures from exact quadrature: Inv₃ delay skews Z, and unequal latch loading can skew X and Y.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2201,
        "output_tokens": 5911,
        "total_tokens": 8112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2201,
        "output_tokens": 5911,
        "total_tokens": 8112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nThe figure shows a ÷2 stage built from two **clocked‑CMOS (C²MOS) inverters** in a loop with a static inverter. Each clocked inverter consists of a \"data\" PMOS/NMOS pair (gates tied to the input node) **in series** with a \"clock\" PMOS/NMOS pair (gates tied to CK and C̄K). Stage 1 is transparent when CK = 1, stage 2 when CK = 0, and the inverting feedback around the loop makes it divide by two.\n\n## Effect of widening the clocked devices\n\n**Locally it helps.** The delay of each stage is set roughly by\n\n$$\\tau \\approx \\left(R_{\\text{on,clk}} + R_{\\text{on,data}}\\right)C_{\\text{out}}$$\n\nwhere $C_{\\text{out}}$ is the capacitance at the node driven by the drains of the *data* transistors (plus the next stage's gates and the wiring). Note that the clocked transistors sit at the *outer* positions — between $V_{DD}$/ground and the sources of the data devices — so their junction capacitance lands on the **internal (series) nodes, not on the output node**. Hence making them wider lowers $R_{\\text{on,clk}}$ without directly adding to $C_{\\text{out}}$: the output charges/discharges faster.\n\n**But globally it hurts.** Two penalties grow with $W_{\\text{clk}}$:\n\n1. **Clock loading.** The gates of these devices are the load seen by CK and C̄K. Doubling their width doubles the clock capacitance, so either the clock buffer (or, in the first divider stage, the VCO itself) must be made bigger — increasing power, delay and jitter — or, if the drive is fixed, the clock edges become slower and the swing smaller. Slow CK edges mean the clocked devices turn on/off sluggishly, the \"both‑on\" overlap time grows, and the effective maximum speed of the divider **drops**.\n2. **Internal‑node charge.** The extra junction/overlap capacitance on the source nodes of the data transistors must be re‑charged after each opaque→transparent transition, causing charge sharing with the output node.\n\n## Conclusion\n\nThere is an **optimum width**: for small widths the series on‑resistance dominates and widening the clocked transistors *improves* speed, but the benefit saturates (as $W_{\\text{clk}}\\to\\infty$, $\\tau \\to R_{\\text{on,data}}C_{\\text{out}}$), while the clock‑path load — and hence the clock buffer/VCO delay and power — keeps growing linearly. Beyond that optimum the speed **degrades**.\n\nIn practice, therefore, the clocked devices are made only comparable to (or modestly larger than) the data devices; simply \"making them wide\" does not buy speed, because the divider's maximum frequency is then limited by the clock drive rather than by the stage's on‑resistance.",
        "format": "markdown",
        "sha256": "9bbdd63aee8a4dab49f0421fceb9a56cf2ad11a924e82240c0ad535c9781846e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly explains that widening the outer clocked devices lowers series resistance without directly loading the output, so speed improves initially. It also identifies charge sharing as a width-related penalty and allows for an optimum before clock loading or other limits dominate, which the full-credit rule accepts.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2283,
        "output_tokens": 4222,
        "total_tokens": 6505,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2283,
        "output_tokens": 4222,
        "total_tokens": 6505,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the clocked devices do here\n\nEach of the two stages is a **tri‑state (clocked) inverter**: the CK/C̄K̄ transistors sit *in series* with the inverter's PMOS and NMOS. Hence, when a stage is transparent, the resistance that charges/discharges the output node is\n\n$$R_{\\rm pull-up}=R_{\\rm on,P(inv)}+R_{\\rm on,P(CK)}\\;,\\qquad R_{\\rm pull-down}=R_{\\rm on,N(inv)}+R_{\\rm on,N(CK)}$$\n\nand the delay of each stage is roughly $(R_{\\rm inv}+R_{\\rm CK})\\,C_{\\rm out}$, where $C_{\\rm out}$ consists of the drain junctions of the inverter devices plus the gate capacitance of the following stage (and of the feedback inverter).\n\n## Effect of widening the clocked transistors\n\n**Locally, the speed improves:**\n\n- $R_{\\rm on,CK}$ falls in proportion to $W$, so the series resistance in the charge/discharge path drops.\n- Crucially, the *drains* of the clocked devices do **not** connect to the output node — they tie to the sources of the inverter transistors (internal nodes X and Y). So their added junction capacitance is **not** seen at the critical output node; it only produces a small charge‑sharing glitch when the stage comes out of the high‑Z state.\n\nSo the stage delay goes from $(R_{\\rm inv}+R_{\\rm CK})C_{\\rm out}$ toward the floor $R_{\\rm inv}C_{\\rm out}$ — i.e. improvement with **diminishing returns**: once $R_{\\rm CK}\\ll R_{\\rm inv}$, further widening buys nothing.\n\n**But globally it can degrade things:**\n\n- The gates of these devices are the load on the CK and C̄K̄ lines. Widening them raises $C_{\\rm CK}$, so the clock buffers must be enlarged (more power), or, if they are not enlarged, CK/C̄K̄ edges become slower and more delayed/skewed.\n- Slow clock edges make the two stages conduct simultaneously for a longer time (overlap), causing contention between the master and slave and eventually incorrect division or reduced maximum operating frequency.\n- Extra capacitance at the internal nodes X, Y means more charge sharing with the output node → larger disturbance on the stored level of the dynamic latch.\n\n## Conclusion\n\nIncreasing the width of the clocked transistors **improves the intrinsic speed of each clocked inverter** (less series resistance, essentially no added load at the output node), but only up to the point where their on‑resistance is small compared with that of the inverter devices. Beyond that, the only consequence is a heavier clock load — larger clock buffers, more power, slower CK edges — so the overall divider speed saturates and can even degrade. In practice the clocked devices are made comparable to (or somewhat wider than) the inverter devices, and no wider.",
        "format": "markdown",
        "sha256": "22afe043608082251b89b4475c8d1999e791ea570cef65fe602fcee9f3ac9049"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that wider clocked devices reduce series resistance without substantially loading the outputs, so speed initially improves. It also notes charge-sharing degradation and plausible saturation or degradation from clock loading at larger widths, consistent with the golden solution.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2283,
        "output_tokens": 4052,
        "total_tokens": 6335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2283,
        "output_tokens": 4052,
        "total_tokens": 6335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the devices in question\n\nThe circuit is a ÷2 (master–slave) stage built from two **C²MOS (clocked‑CMOS) inverters** in a loop with a static inverter. Each C²MOS inverter has\n\n* a **signal pair** (gates tied to the data node), and\n* a **clocked pair** – the PMOS whose gate sees CK̄ (or CK) and sits between V_DD and the signal PMOS, and the NMOS whose gate sees CK (or CK̄) and sits between ground and the signal NMOS.\n\n## First‑order effect: it looks like speed improves\n\nWhen a stage is in its \"evaluate\" phase, the clocked device is simply a series switch in the charge/discharge path of the output node:\n\n$$\\tau_{out}\\approx (R_{sig}+R_{ck})\\,C_{out}$$\n\nWidening the clocked transistors lowers $R_{ck}$, so the output rises/falls faster. Note also that the *drain* junction capacitance of these devices lands on the **internal** node (the source of the signal transistor), **not** on the output node, so $C_{out}$ barely changes. Hence the local delay does improve — but only until $R_{ck}\\ll R_{sig}$, after which nothing more is gained (a bounded improvement, typically less than 2×).\n\n## Second‑order effects: why the speed eventually degrades\n\n1. **Clock loading.** The gate capacitance of these devices is tied directly to CK and CK̄, and it grows *linearly* with W. The buffer (or VCO output) driving the clock must now charge a much larger capacitance, so the clock edges become slower and the clock buffer consumes more power. A divider with sluggish clock edges loses margin and its maximum operating frequency drops.\n\n2. **Degraded switching of the clocked device itself.** With slow CK transitions, the clocked transistor spends a longer time in weak inversion, lengthening the time before the stage can actually drive the output, and both the pull‑up and pull‑down paths can be partially on simultaneously.\n\n3. **Internal‑node capacitance / charge sharing.** The extra junction capacitance at the internal node must be charged and discharged each cycle, partly cancelling the resistance benefit, and it worsens charge sharing with the output node.\n\n4. **Clock feedthrough.** Larger clocked devices couple more of the clock swing onto the output node through their overlap/junction capacitances, corrupting the retained level during the hold phase.\n\n## Conclusion\n\nThere is an **optimum width**: starting from minimum size, widening the clocked transistors gives a modest, rapidly saturating speed improvement (the series resistance disappears), but the clock capacitance keeps rising in proportion to W. Beyond the optimum the heavier clock load slows the clock edges (or forces a much larger, power‑hungry clock buffer), so the **overall speed of the divider degrades** — i.e., making the clocked devices very wide is counter‑productive.",
        "format": "markdown",
        "sha256": "918d6dc2ba3e7b937c02fb79b882eed6fd3d1ef449fdd58795bf2ea03617a57c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly says widening initially improves speed by reducing clocked-device resistance, and identifies internal-node capacitance and charge sharing as limits. The stated later degradation from clock loading is allowed by the golden solution’s full-credit rule.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2283,
        "output_tokens": 3518,
        "total_tokens": 5801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2283,
        "output_tokens": 3518,
        "total_tokens": 5801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the figure shows\n\nThree inverters are connected **in a loop**, but the loop is broken in two places by switches driven by **complementary clock phases**:\n\n| Node | Definition |\n|---|---|\n| **X** | output of Inv₃ → bottom wire back to the left |\n| **S₁** (closed when CK = 1) | between X and node A |\n| **A** | input of Inv₁ |\n| **B** = Ā | output of Inv₁ |\n| **S₂** (closed when C̄K = 1, i.e. CK = 0) | between B and node C |\n| **C** | input of Inv₂; **D** = C̄ ; **X** = D̄ = C |\n\nSo: *switch – inverter – switch – inverter – inverter – back to the start.*\n\n## Key observation: this is **not** a ring oscillator\n\nThe loop contains an odd number (3) of inversions, so if the two switches were shorted it *would* be a 3‑stage ring oscillator. But CK and C̄K are complementary, so **S₁ and S₂ are never on at the same time** – the loop is always open. The circuit is therefore a *clocked (dynamic) sequential* circuit: when a switch opens, its following node floats and the logic level is **stored on the parasitic capacitance** of that node (a dynamic latch).\n\n## Phase‑by‑phase operation\n\n**CK = 1 (S₁ on, S₂ off):**\n- A ← X (= C, which is being held) , B = Ā\n- C floats → holds its old value → D = C̄, X = C (constant during the whole phase)\n- ⇒ A is acquired at the **rising edge** and stays constant.\n\n**CK = 0 (S₂ on, S₁ off):**\n- A floats → holds its value; B = Ā\n- C ← B = Ā ⇒ D = A, **X = Ā**\n\nHence at the next rising edge A samples X = Ā:\n\n$$A_{n+1}=\\overline{A_n}\\quad\\text{(at every rising edge of CK)}$$\n\n| Phase | CK | A | B | C | D | X |\n|---|---|---|---|---|---|---|\n| 1 | 1 | 0 | 1 | 0 | 1 | 0 |\n| 2 | 0 | 0 | 1 | 1 | 0 | 1 |\n| 3 | 1 | 1 | 0 | 1 | 0 | 1 |\n| 4 | 0 | 1 | 0 | 0 | 1 | 0 |\n| 5 | 1 | 0 | 1 | 0 | 1 | 0 | ← repeats\n\nThe pattern repeats after **two clock cycles**.\n\n## Function: a dynamic ÷2 circuit (toggle flip‑flop)\n\n(S₁ + Inv₁) and (S₂ + Inv₂) are two dynamic latches operating on opposite clock phases = a **master–slave D flip‑flop**; Inv₃ makes the number of inversions in the feedback path **odd**, i.e. it returns Q̄ to D. A D‑FF with D = Q̄ is a **toggle flip‑flop → frequency divider by two**, with 50 % output duty cycle (set by the uniformity of the CK rising edges, not by CK's duty cycle).\n\n```\nCK  ___|‾‾‾|___|‾‾‾|___|‾‾‾|___|‾‾‾|___      f\nA     0   0   1   1   0   0   1   1          f/2   (0°)   ↑CK-triggered\nC     0   1   1   0   0   1   1   0          f/2   (90°)  ↓CK-triggered\nB     1   1   0   0   1   1   0   0          f/2   (180°)\nD     1   0   0   1   1   0   0   1          f/2   (270°)\n```\n\nBecause A changes on rising edges and C on falling edges, the four nodes give **quadrature (0°/90°/180°/270°) outputs at f_CK/2** – which is exactly why such dividers are used in RF LO chains to generate I/Q carriers.\n\n## Design constraints and practical issues\n\n- **Maximum speed:** each half period must allow the switch to charge the next input node and the inverter to settle: T/2 ≳ R_on·C_in (a few τ) + t_pd,inv ⇒ f_max ≈ 1/[2(τ_sw + t_pd)].\n- **Minimum speed:** the floating nodes are *dynamic*; junction/subthreshold leakage destroys the stored level, so there is a **lower frequency limit** (typically kHz–MHz). A static version needs cross‑coupled keepers/latches on A and C.\n- **Clock overlap / race:** if CK and C̄K overlap (slow edges, skew), both switches conduct, the 3‑inverter loop closes and the circuit races or free‑runs as a ring oscillator → division failure. Sharp, well‑complemented clocks (or transmission gates with matched drive) are required.\n- **Switch implementation:** NMOS pass transistors are the most compact but lose a V_TH on the high level (static current in the following inverter, reduced margin); CMOS transmission gates give rail‑to‑rail levels at the cost of extra clock loading. Charge injection and clock feedthrough on the floating nodes also eat into noise margin at low V_DD.\n- **I/Q accuracy** depends on the CK duty cycle (A is set by ↑CK, C by ↓CK), so duty‑cycle error maps directly into quadrature phase error.\n- **Attractions:** very small (3 inverters + 2 switches), rail‑to‑rail outputs (inverters restore levels), low clock load, and power ≈ CV²f (no static bias current, unlike CML dividers).",
        "format": "markdown",
        "sha256": "157938e750e32356e94b0047ff87149c1df780ffa433787eb76a33ae782484d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic-latch divide-by-two and explains its half-frequency toggling. The additional internal signal and application details are not required for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1431,
        "output_tokens": 8610,
        "total_tokens": 10041,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6709,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1431,
        "output_tokens": 8610,
        "total_tokens": 10041,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6709,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the figure is\n\nThree inverters are connected in a **ring**, but the ring is cut in two places by switches that are driven by complementary clock phases:\n\n```\n   ┌──────────────────── O  ◄── Inv3 ◄── Inv2 ◄── Z ◄──[S2: CK̄]── Y ◄── Inv1 ◄── X ◄──[S1: CK]──┐\n   └─────────────────────────────────────────────────────────────────────────────────────────────┘\n```\n\n* **S1** (controlled by **CK**) connects the output node **O** to the input **X** of Inv₁.\n* **S2** (controlled by **CK̄**) connects Inv₁'s output **Y** to the input **Z** of Inv₂.\n* Inv₂ + Inv₃ in cascade = a **non‑inverting buffer**, so **O = Z**.\n\nSo around the loop there is only **one net inversion** (odd), and the two switches are **never closed at the same time** – the loop is *never* electrically complete. Hence this is *not* a ring oscillator; it is a **master–slave (two‑phase) structure whose output is fed back inverted**, i.e. a **toggle flip‑flop = ÷2 circuit**.\n\n* Master = S1 + Inv₁ (transparent while CK = 1)\n* Slave = S2 + Inv₂ (+Inv₃ as output buffer) (transparent while CK = 0)\n* Feedback = O back to the master input, with the loop's single inversion providing D = Q̄.\n\n## Phase-by-phase analysis\n\nTake O = 0 initially; X and Z hold charge on the gate capacitance of the following inverter when their switch is off.\n\n| Interval | S1 (CK) | S2 (CK̄) | X | Y = X̄ | Z | O = Z |\n|---|---|---|---|---|---|---|\n| CK = 1 | on | off | X ← O = 0 | 1 | held = 0 | 0 |\n| CK = 0 | off | on | held = 0 | 1 | Z ← Y = 1 | **1** |\n| CK = 1 | on | off | X ← O = 1 | 0 | held = 1 | 1 |\n| CK = 0 | off | on | held = 1 | 0 | Z ← Y = 0 | **0** |\n\n```\nCK   ‾|___|‾‾‾|___|‾‾‾|___|‾‾‾\nX      ──0──────────1─────────   (updates on CK rising edge)\nO    ___|‾‾‾‾‾‾‾|_______|‾‾‾‾‾   (updates on CK falling edge)\n```\n\n**Result:** X is refreshed on every rising edge with the old output, and O is replaced by X̄ on every falling edge ⇒ the output inverts once per clock period:\n\n$$f_{out}=\\frac{f_{CK}}{2},\\qquad \\text{duty cycle}=50\\% \\text{ (if CK is symmetric)}$$\n\n## Properties / design issues\n\n1. **Dynamic (not static) storage.** During the opaque half‑cycle, X and Z float, holding charge on gate capacitance. Leakage therefore sets a **minimum operating frequency**; below it the state decays and the divider loses data. (A static version needs a cross‑coupled keeper, i.e. an even‑inversion latch in each half.)\n2. **Maximum frequency.** Each half period must accommodate the settling of its branch:\n T_CK/2 > max( R_on1C + t_Inv1 , R_on2C + t_Inv2 + t_Inv3 ).\n The two branches are **unbalanced** (one inverter vs. two), so the slave branch limits speed; one would either skew the clock duty cycle or redistribute the inverters.\n3. **Clock overlap is fatal.** If CK and CK̄ overlap (finite edge rates), both switches conduct and the odd‑inversion loop closes → race / ring‑oscillator behaviour (≈1/(6t_pd)) and loss of the correct divide ratio. Sharp complementary edges or non‑overlapping phases are required.\n4. **Switch realization.** Single NMOS switches pass only V_DD − V_TH, leaving the following inverter partly on (static current, reduced noise margin); CMOS transmission gates or a C²MOS/TSPC‑style clocked‑inverter implementation are preferred. Charge injection and clock feedthrough also disturb the floating nodes X and Z.\n5. **Benefits.** Very small and low power (only dynamic power, no static bias current as in a current‑mode‑logic divider) — this is the classic **dynamic ÷2 cell** used in high‑speed prescalers.",
        "format": "markdown",
        "sha256": "1dc0471c3ca831f53cf4cc539297f518c1cdbbcaab257dda6d202a1f9d778ea9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic master–slave divide-by-two, with alternating sample/hold phases producing an output at half the clock frequency. The extra implementation details are not required for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1431,
        "output_tokens": 5650,
        "total_tokens": 7081,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1431,
        "output_tokens": 5650,
        "total_tokens": 7081,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the figure shows\n\nReading around the loop (signal returns on the bottom wire):\n\n```\n ┌──── S1(CK) ──→ Inv1 ──→ S2(CK̄) ──→ Inv2 ──→ Inv3 ──┐\n │        Y            Z           W                 X │\n └──────────────────────────────────────────────────────┘\n```\n\n* **Three inverters** in a ring → an **odd** number of inversions.\n* **Two series switches** (transmission gates) in that ring, driven by **complementary clocks** CK and C̄K̄ — so **only one switch is ever closed at a time** and the loop is *never* electrically closed.\n* The nodes that sit behind an open switch (Y or W) are left **floating**, i.e. the data is stored on the gate capacitance of the following inverter → *dynamic* storage.\n\nSo each “switch + inverter’’ pair is a **dynamic latch**, and the third inverter (Inv3) supplies **inverting feedback** from the second latch back to the first.\n\n**Master latch:** S1 + Inv1 (samples when CK = 1, holds when CK = 0)\n**Slave latch:** S2 + Inv2 (samples when CK = 0, holds when CK = 1)\n**Feedback:** Inv3 inverts the slave output and returns it to the master input.\n\nMaster–slave latch pair with **inverted** feedback = **toggle flip‑flop = divide‑by‑two circuit.**\n\n## Phase‑by‑phase operation\n\nRelations: Z = Ȳ, X = W (two inversions), Y ← X only when CK = 1, W ← Z only when CK = 0.\n\n| half‑cycle | CK | S1 | S2 | Y | Z | W | X (out) |\n|---|---|---|---|---|---|---|---|\n| 1 | 1 | on | off | 0 (←X) | 1 | 0 (held) | 0 |\n| 2 | 0 | off | on | 0 (held) | 1 | 1 (←Z) | **1** |\n| 3 | 1 | on | off | 1 (←X) | 0 | 1 (held) | 1 |\n| 4 | 0 | off | on | 1 (held) | 0 | 0 (←Z) | **0** |\n| 5 | 1 | … | … | 0 | 1 | 0 | 0 |\n\nThe pattern repeats after **four half‑cycles = two clock periods**:\n\n```\nCK  ‾|_|‾|_|‾|_|‾|_\nX    0 1 1 0 0 1 1 0      →  f_out = f_CK / 2\n```\n\nEach time the clock completes one cycle the stored bit is inverted and written back — the state advances by one latch per half clock cycle, exactly the behaviour of a ÷2 (Johnson‑counter/toggle) stage. Node Y changes on the rising edges and node W/X on the falling edges, so the two latch outputs are the **quadrature phases (0°/90°) of the divided clock** — this is why this cell is the standard LO quadrature generator in RF front ends.\n\n## Key points of the design\n\n1. **Odd number of inversions is essential.** With an even number the loop would be a plain bistable latch (it would just hold data); with three it toggles.\n2. **Why it doesn’t oscillate.** Three inverters in a *closed* ring would be a ring oscillator (f ≈ 1/6t_pd). Here the complementary switches guarantee the ring is always broken at one point, so the circuit is clocked, not free‑running. (If CK and C̄K̄ overlap, both switches conduct briefly → race‑through/false toggling or oscillation; non‑overlapping or well‑matched complementary clocks are required.)\n3. **Dynamic / ratioless.** No keeper devices are shown, so Y and W are held only by charge on the inverter input capacitance. Consequence: a **minimum operating frequency** (leakage discharges the node — typically fails below ~kHz) and sensitivity to clock feedthrough and charge injection. Adding weak cross‑coupled/feedback inverters converts it into a static divider.\n4. **Maximum speed** is set by the inverter delay plus the RC of the switch: roughly T/2 > t_inv + R_on·C_node. Since one half‑cycle contains two inverters (Inv2 + Inv3) and the other only one (Inv1), the loop is slightly asymmetric, which limits speed and can skew the output duty cycle.\n5. **Switch implementation.** Full CMOS transmission gates (or clocked C²MOS stages) are preferred; single NMOS pass transistors introduce a V_TH level drop at the stored node, degrading noise margin and speed.\n6. **Power/area:** very compact (3 inverters + 2 gates), only dynamic power — hence its popularity as the first stage of high‑speed frequency dividers in PLLs.\n\n**Summary:** the arrangement is a dynamic master–slave (toggle) flip‑flop — three inverters in a ring with two complementary clocked switches — which functions as a **÷2 frequency divider** producing two quadrature outputs at f_CK/2, the switches preventing the odd‑inverter ring from acting as an oscillator.",
        "format": "markdown",
        "sha256": "e53a29ae072aa67e68a1dc2409a2773535b491b8e4dc6a0a132447357531d842"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a divide-by-two implemented with dynamic latches; the additional internal timing and signal-path details are not required for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1431,
        "output_tokens": 7006,
        "total_tokens": 8437,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5264,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1431,
        "output_tokens": 7006,
        "total_tokens": 8437,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5264,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the red inverter actually does topologically\n\nFollow the nodes:\n\n- **A** – left plate of the CK switch (= output of the last inverter, fed back along the bottom wire)\n- **B** – right plate of the CK switch (= input of Inv₁) ← *dynamic node*\n- **C** – output of Inv₁ (= left plate of the $\\overline{CK}$ switch)\n- **D** – right plate of the $\\overline{CK}$ switch (= input of Inv₂) ← *dynamic node*\n\nThe red inverter goes **from A to C**, i.e. it sits **in parallel with the series combination of the CK switch and Inv₁** — it *bypasses the sampling switch*. That is the root of the problem.\n\n## Phase CK = 1 (S₁ on, S₂ off)\n\nInv₁ and the red inverter both drive C from A with the same polarity, so there is no conflict. The red device even gives a little extra drive on C (it avoids the switch on‑resistance and the RC at node B). The only cost here is the extra input capacitance it hangs on node A (output of the last inverter).\n\n## Phase CK = 0 (S₁ off, S₂ on) – where it breaks\n\nIn this phase the first stage is supposed to **hold** its state: B floats and Inv₁ keeps C at the sampled value. But:\n\n1. **Contention.** With S₂ closed, the loop C→Inv₂→Inv₃→A gives A = C, so the red inverter tries to force C = $\\bar C$ while Inv₁ holds C. The two outputs fight each other → crowbar/static current every half cycle, degraded logic levels at C and D, reduced noise margin, slower regeneration.\n\n2. **No stable state → ring oscillation.** The loop red → (C–D) → Inv₂ → Inv₃ → back to red contains **three inversions**, i.e. an odd number. Such a loop has no DC solution (C = $\\bar C$) and will **self‑oscillate** at the gate‑delay frequency if the red inverter is comparable in strength to Inv₁. The circuit then stops being a ÷2 and instead free‑runs (or injection‑locks to CK), producing the wrong frequency, duty‑cycle error and large jitter.\n\n3. **Loss of clocked isolation.** Because the switch is bypassed, the first latch is permanently transparent — the data path from A to C is never cut, so there is no master/slave separation and the ÷2 operation relies on S₂ alone, creating race conditions.\n\n## Net effect\n\n- It must be made **much weaker (ratioed)** than Inv₁ so that Inv₁ wins the fight; in that case it no longer flips the node, but it still adds **load at A and C, extra dynamic + short‑circuit power, longer delays and therefore a lower maximum division frequency**, with essentially no benefit.\n- If it is not weak, the divider **fails functionally** (self‑oscillating three‑stage ring).\n- If the intent was to make the dynamic nodes static (so the divider works at very low CK frequencies), the keeper has to be a **back‑to‑back (even‑inversion) pair around the actual floating node** (B, or D), not an odd‑inversion path around the sampling switch.",
        "format": "markdown",
        "sha256": "201f19080ce57983280020aa6c14b8483eccafdb9884537fadde4374265637c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the A-to-C feedforward bypass and the low-frequency contention/oscillation risk. However, it ultimately says the branch provides no benefit and lowers maximum division frequency, contradicting the central result that it speeds high-frequency operation; the net performance conclusion is therefore substantially wrong.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1230,
        "output_tokens": 10203,
        "total_tokens": 11433,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9134,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1230,
        "output_tokens": 10203,
        "total_tokens": 11433,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9134,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## First, what the circuit is without the red inverter\n\nThe black circuitry is a classic **÷2 (static‑style) divider built as a ring**:\n\n```\nX ──S1(CK)── A ──Inv1── Y ──S2(CK̄)── B ──Inv2── C ──Inv3── back to X\n```\n\n* S1 and S2 are on in opposite clock phases, so the two \"half‑latches\" (S1+Inv1 and S2+Inv2) are never transparent at the same time.\n* Inv2 + Inv3 give **two** inversions, so X = B; together with Inv1 the loop contains an **odd** number of inversions → the state toggles once per clock cycle → divide‑by‑two.\n\n## What the red inverter does topologically\n\nIts input is node **X** (the left side of S1, i.e. the fed‑back output) and its output is node **Y** (the output of Inv1). It is therefore a **feed‑forward path in parallel with the series combination S1 + Inv1**, bypassing the switch entirely.\n\n## Phase‑by‑phase effect\n\n**CK high (S1 on, S2 off):** A = X, so Inv1 delivers Y = X̄ and the red inverter delivers Y = X̄ as well. The two devices *reinforce* each other. Since the red path does not go through the transmission‑gate resistance, node Y is pulled to its new level faster and is never left floating. This is the only \"benefit.\"\n\n**CK low (S1 off, S2 on):** Now A is frozen at its old value while Y is passed to B, and B propagates through Inv2–Inv3 so that **X flips**. Inv1 still holds Y at the correct (new) value, but the red inverter now wants Y = X̄ = the *old* value → the two inverters **fight each other**.\n\nWorse, with S2 closed the path\n\n```\nY → B → Inv2 → Inv3 → X → (red inverter) → Y\n```\n\ncontains **three inversions**, i.e. the red inverter closes a **three‑stage ring oscillator** around the loop.\n\n## Consequences for performance\n\n* **Static contention current / power:** for roughly half of every clock period the red inverter and Inv1 drive node Y in opposite directions, burning crowbar current and raising power.\n* **Degraded levels and speed:** node Y no longer swings rail‑to‑rail (it settles at a divided value set by the two output resistances), reducing noise margin and slowing the following stage; the extra load capacitance on X and Y also lowers f_max.\n* **Risk of malfunction / self‑oscillation:** if the red inverter is comparable in strength to Inv1, it overrides Inv1 and the three‑inverter ring actually oscillates. The circuit then no longer divides cleanly by 2 — it behaves like a self‑oscillating (injection‑locked) divider, with a limited lock range, a nonzero minimum input frequency, and wrong output if the input is outside that range.\n* **Sizing constraint:** it only \"works\" if the red inverter is made much weaker (long‑channel keeper) than Inv1 — and then its speed benefit in the other half cycle is marginal.\n\n**Bottom line:** the red inverter helps drive node Y only while S1 is on; during the other half cycle it opposes Inv1 and closes an odd‑inversion loop, so it adds contention power, degrades logic levels and speed, and can make the divider self‑oscillate instead of dividing. It is not a proper \"keeper\" (the correct keeper would feed back from Y to A), so it hurts more than it helps.",
        "format": "markdown",
        "sha256": "d271621f68b8c51893eeb5d99d98006b1d8c0c2b08c506779aa79d2f15549082"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the feedforward bypass and its faster drive of Y, and recognizes the unclocked three-inversion loop and low-frequency failure risk. But its bottom line says the inverter hurts more than it helps and degrades speed, contradicting the key high-speed benefit; it also does not clearly state that the usable minimum clock frequency rises.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1230,
        "output_tokens": 13828,
        "total_tokens": 15058,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1230,
        "output_tokens": 13828,
        "total_tokens": 15058,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nThe loop of switches + inverters is a **dynamic ÷2 circuit (master–slave latch with inverting feedback)**. The CK switch samples the fed‑back level onto the input of Inv₁, the $\\overline{CK}$ switch passes it on to the next pair of inverters, and because the loop contains an odd number of inversions the state toggles once per clock cycle.\n\nWhen a switch is off, the gate node behind it (Inv₁'s input, and later Inv₂'s input) is **floating** – the data is stored only as charge on the gate capacitance. That is what makes the circuit \"dynamic.\"\n\n## What the red inverter does\n\nThe red inverter is a **keeper**: it is placed in parallel with the (CK switch + Inv₁) path so that the internal node is always driven by a dc path rather than left floating.\n\n**Benefit – static operation:**\n* The state no longer relies on stored charge, so leakage, sub‑threshold currents and charge sharing cannot destroy it.\n* The divider therefore works down to arbitrarily low input frequencies (and holds its state if the clock is stopped, e.g. during power‑down, slow start‑up, or testing/scan). A purely dynamic divider has a *minimum* operating frequency, typically set by the leakage time constant of the floating node.\n\n**Cost – speed, power and ratioed sizing:**\n* The keeper **fights the main path**. When the loop tries to flip the node, the red inverter is still driving it to the old level, so the circuit becomes *ratioed*: Inv₁ (and the switch in series with it) must be strong enough to overpower the keeper. This contention slows regeneration and lengthens the clock‑to‑Q delay.\n* To win the fight, the keeper must be made weak (long/minimum‑width devices) and/or the driving inverter and transmission gate must be upsized — which in turn loads the clock and the preceding VCO buffer, costing more power.\n* The inverter itself adds **gate capacitance to two nodes of the loop** (its input loads the feedback node, its output loads the latch node), directly lowering the maximum toggle frequency.\n* During the contention interval both devices conduct, so there is a **short‑circuit/crowbar current** component: more power per transition.\n* Correct operation now depends on a **device‑ratio/strength condition**, so it is less robust across process, voltage and temperature than the unratioed dynamic version (and if the keeper is too strong the loop can hang up or even oscillate).\n\n## Bottom line\n\nThe red inverter converts the dynamic ÷2 stage into a **static** one: it removes the low‑frequency (leakage) failure limit and lets the divider retain state with the clock stopped. The price is a lower maximum operating frequency (typically tens of percent), extra delay, extra power, and sizing‑dependent (ratioed) robustness — which is why high‑speed prescaler first stages are usually left dynamic (or implemented as CML/injection‑locked), with static dividers used only in the slower back‑end stages.",
        "format": "markdown",
        "sha256": "b2d1132e86a119ce474453712f2757a47b727b6d0770615248590032b94a1964"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a static keeper and reverses the key tradeoff: the actual feedforward bypass improves high-speed operation, while its unclocked loop raises the minimum usable clock frequency. The generic dynamic-divider and contention comments are somewhat relevant, but they do not capture the central mechanism.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1230,
        "output_tokens": 8976,
        "total_tokens": 10206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1230,
        "output_tokens": 8976,
        "total_tokens": 10206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer: no, that explanation is wrong.\n\nLook carefully at where the red inverter's two terminals go:\n\n* **Input:** the node on the **left side of the CK switch** — i.e. the output of the last inverter in the chain (the divider's output / feedback node). Call it **Q**.\n* **Output:** the node at **Inv₁'s output** (between Inv₁ and the $\\overline{CK}$ switch). Call it **Y**.\n\nSo the red inverter is **in parallel with the cascade (CK switch → Inv₁)**, not in feedback around Inv₁. Its input and Inv₁'s input sit on *opposite sides of the same switch*, and their outputs are tied to the same node. Two inverters whose outputs are shorted together are a *parallel (ratioed) drive*, not a cross‑coupled pair.\n\n## Why it cannot be a keeper\n\nA static (leakage‑immune) storage node requires a loop with an **even** number of inversions (bistability). Enumerate the loops in this circuit:\n\n* Q → CK switch → X → Inv₁ → Y → $\\overline{CK}$ switch → Z → Inv₂ → Inv₃ → Q : **3 inversions**\n* Q → red → Y → $\\overline{CK}$ switch → Z → Inv₂ → Inv₃ → Q : **3 inversions**\n\nEvery loop is **odd** ⇒ there is no bistable element anywhere in the circuit, with or without the red inverter. The nodes that actually float are **X** (Inv₁'s input, high‑Z while CK = 0) and **Z** (first slave inverter's input, high‑Z while CK = 1). The red inverter touches *neither* of them, so leakage can still destroy the stored charge → **the minimum clock frequency is not removed.**\n\nIt is in fact worse than neutral. Trace the low phase:\n\n| phase | X | Y | Z | Q | red wants Y = |\n|---|---|---|---|---|---|\n| CK = 1 | Q | $\\bar Q$ | holds | Q | $\\bar Q$ ✔ (agrees with Inv₁) |\n| CK = 0 (after slave flips) | floats at old Q | $\\overline{X}$ (held by Inv₁) | = Y | $\\bar{X}$ (toggled!) | $X$ ✘ (opposite of Inv₁) |\n\nBecause Q has just toggled, during most of the hold phase the red inverter **fights Inv₁**: static contention current, and if the red device is not much weaker than Inv₁, the stored bit is flipped. And since red + Inv₂ + Inv₃ is a closed **three‑stage ring** while $\\overline{CK}$ is on, a slow (or stopped) clock makes the circuit free‑run as a ring oscillator rather than hold data.\n\n## What the red inverter really does\n\nWhile CK = 1 the switch is closed, so the red inverter and Inv₁ have the *same* input and the *same* output: it is simply a **parallel / feed‑forward (bypass) drive** of the master's output node:\n\n* it drives Y directly from the **full‑swing** node Q, bypassing the pass switch, so Y gets a strong, well‑defined level even though an NMOS switch only delivers $V_{DD}-V_{TH}$ to Inv₁'s input;\n* it adds drive for the charge‑sharing/slewing transient when the $\\overline{CK}$ switch closes and Y must flip the slave input node Z (at that instant both inverters still agree), i.e. it speeds up the master→slave transfer;\n* and because of the odd loop above, it keeps the chain from parking at mid‑rail when the clock is very slow — the circuit free‑runs instead.\n\nThat is all; it is a **ratioed booster / level restorer, not a storage element**, and it must be made deliberately weak, otherwise the divider stops dividing and becomes a gated 3‑stage ring oscillator.\n\n## How you would actually make it static\n\nPut the weak inverter **back‑to‑back** with each forward inverter whose input floats:\n\n* weak inverter from **Inv₁'s output back to Inv₁'s input** (holds X while CK = 0), and\n* weak inverter from the **first slave inverter's output back to its input** (holds Z while CK = 1), or use clocked/tri‑state keepers.\n\nThose give even‑inversion (regenerative) loops, which is what removes the minimum‑frequency limit. The inverter drawn in red simply isn't connected that way.",
        "format": "markdown",
        "sha256": "f26ca87f27874e3d25ab4a83ae776c2ad16d4e23b0301570fd79bba8612baf6d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as a feedforward bypass that can speed operation. It also captures the low-frequency tradeoff: the unclocked branch fights Inv1 and can form a three-inversion ring that corrupts division. Extra loop and leakage details do not undermine the essential answer.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1305,
        "output_tokens": 50198,
        "total_tokens": 51503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1305,
        "output_tokens": 50198,
        "total_tokens": 51503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer: no, I don't agree\n\nLook carefully at **where the red inverter is tied**. Call the nodes\n\n* **A** – output of the last inverter = **input side** of the CK switch (the divider's feedback node, and the red inverter's **input**)\n* **B** – Inv₁'s input (far side of the CK switch) – *floating when CK = 0*\n* **C** – Inv₁'s output = input side of the C̄K̄ switch (the red inverter's **output**)\n* **D** – Inv₂'s input (far side of the C̄K̄ switch) – *floating when CK = 1*\n* **E** – Inv₂'s output = Inv₃'s input\n\nSo the red inverter sits **in parallel with the series branch (CK switch + Inv₁)** – it is a *feed‑forward* path, not a feedback element around Inv₁.\n\n### Why it cannot be a keeper\n\n1. **Wrong terminals.** A keeper/cross‑coupled pair must take its input from Inv₁'s **output** and return to Inv₁'s **input** (B), so that the local loop contains **two** inversions → positive feedback. Here the input is taken from the *other side of the switch* (A), so no loop is closed around Inv₁ at all.\n2. **Wrong parity.** The loop that the red inverter *does* close is C → (C̄K̄ switch) → D → Inv₂ → E → Inv₃ → A → red → C: **three inversions = negative feedback**. Such a loop oscillates; it can never hold a logic level. There is no regeneration anywhere in the circuit.\n3. **It doesn't touch the dynamic nodes.** The nodes that actually float (and hence set the minimum clock frequency) are **B and D**, i.e. the nodes *behind* the switches. Node C is already driven by Inv₁; it never floats. The red inverter drives neither B nor D, so the divider is still a *dynamic* divider and the leakage‑imposed f_min is still there.\n\n(A genuinely static version needs **two weak keepers**: C→B, cross‑coupled with Inv₁, and E→D, cross‑coupled with Inv₂ – or clocked inverters plus cross‑coupled pairs.)\n\n### What the red inverter actually does\n\nPhase by phase:\n\n* **CK = 1:** B = A, so Inv₁ and the red inverter drive node C with the *same* polarity. The red inverter is simply extra drive on C, bypassing the pass‑switch RC → the C transition (and hence the slave) is faster.\n* **CK = 0:** B is isolated and Inv₁ holds C at the sampled value, but A has meanwhile toggled, so the red inverter now pulls C toward the **opposite** value → **contention** with Inv₁.\n\nSo it is a feed‑forward / \"pre‑emphasis\" path: it pre‑positions C toward the value it must take after the next CK edge, which buys some speed at the top of the frequency range — at the price of static contention current and the requirement that it be made much weaker than Inv₁.\n\n### The punch line\n\nIts effect on the *low*-frequency end is the **opposite** of what the quoted answer claims. If the clock period is long enough (or the red inverter is not weak enough), it wins the fight on node C, the stored data in the master is overwritten, and the three‑inverter ring (red–Inv₂–Inv₃, closed by the C̄K̄ switch) breaks into free oscillation. In other words the red inverter **creates** a minimum clock frequency — set by gate delays, i.e. orders of magnitude higher than the leakage‑determined one — instead of removing it.\n\nThe only way to read this inverter as intentional is as a **self‑oscillating / injection‑locked ÷2**: red + Inv₂ + Inv₃ form a 3‑stage ring whose free‑running frequency is set by the gate delays, and the clocked branch (CK switch + Inv₁) injection‑locks it to f_CK/2. That buys speed and low power, but it has both a minimum *and* a maximum (lock‑range) frequency — nothing \"static\" about it.",
        "format": "markdown",
        "sha256": "2c062fffae8af39cb18b3b54674233b4047d178ccb888990fbfcd79a7ea9e125"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly rejects the keeper interpretation, identifies the red inverter as a feedforward path bypassing the CK switch and Inv1, and explains the high-speed benefit versus low-frequency contention and oscillation that raises the minimum usable clock rate. Its ring/injection-lock description is consistent with the golden solution.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1305,
        "output_tokens": 43540,
        "total_tokens": 44845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1305,
        "output_tokens": 43540,
        "total_tokens": 44845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nNo — that explanation is wrong on two counts: the red inverter is **not** connected as a cross‑coupled keeper, and the circuit is still fully dynamic, so the leakage‑induced *minimum* clock frequency is still there (if anything, the red inverter makes the low‑frequency behaviour worse).\n\n## Trace the nodes first\n\nLabel the loop:\n\n| node | what it is |\n|---|---|\n| **N1** | far‑left node = output of the last inverter = divider output / feedback node = **input of the CK switch** and **input of the red inverter** |\n| **N2** | between CK switch and Inv₁ → Inv₁'s input (floats when CK is low) |\n| **N3** | Inv₁'s **output** = **red inverter's output** = input of the $\\overline{CK}$ switch |\n| **N4** | between $\\overline{CK}$ switch and Inv₂ (floats when CK is high) |\n\nSo the red inverter goes **N1 → N3**, i.e. from the node *ahead of* the switch to the node *after* Inv₁.\n\nA keeper would have to go the other way: **N3 → N2**, so that it and Inv₁ form a loop with an *even* number of inversions around the storage node N2. What is drawn instead is an inverter **in parallel** with the series combination (CK switch + Inv₁): when CK is high, the two inverters are literally tied input‑to‑input and output‑to‑output — that is just one bigger inverter, with **zero feedback and zero bistability**.\n\nQuick sanity check on the loop polarity: go around through the red inverter → $\\overline{CK}$ switch → Inv₂ → Inv₃ → back to N1. That is **three** inversions, an odd number. An odd‑inversion loop is a *ring oscillator*, not a latch. A latch needs an even count.\n\n## Why the \"no minimum frequency\" conclusion fails\n\n* The two storage nodes are **N2** (floats while CK is low) and **N4** (floats while CK is high). The red inverter holds neither of them, so junction/subthreshold leakage still destroys the state at low clock rates.\n* Even a *correct* keeper on latch 1 would not be enough — you'd need one on latch 2 as well.\n* Worse: park CK low and the odd‑inversion loop above is closed through the $\\overline{CK}$ switch, so the circuit tends to run away / self‑oscillate instead of holding. Park CK high and N4 simply leaks away. Either way, nothing is retained.\n\n## What the red inverter really does\n\nIt is an **unclocked bypass (feed‑forward) path around the clocked switch**, i.e. a second inverting path from the feedback node N1 to Inv₁'s output N3. Consequences:\n\n1. **N3 is driven at all times**, directly from the full‑swing, low‑impedance node N1 — it does not wait for the switch's on‑resistance/RC, and it is immune to the charge injection and droop on the floating node N2.\n2. **Pre‑driving / head start.** During the CK‑low phase, N1 has already flipped, so the red inverter is already pulling N3 toward the value it must take in the *next* high phase. When CK rises, Inv₁ (now with its new input) and the red inverter push together, so N3 flips much faster. This rebalances the delay budget between the two half‑cycles (2 inverter delays in one phase vs. 1 in the other) and raises the **maximum** operating frequency.\n3. Viewed regeneratively, it closes the three‑stage inverter ring during the $\\overline{CK}$ phase, so the divider acquires a self‑oscillating / injection‑locked character — which is exactly how such inverter‑based ÷2 cells are pushed to very high speed.\n\nThe price is that this is now **ratioed logic**: the red inverter fights Inv₁ throughout the hold phase, so it must be sized *weaker* than Inv₁ (otherwise N3 — and hence N4 and N1 — get dragged back and the ÷2 ratio is lost, or the ring just oscillates). It also burns contention current and imposes a *lower* frequency bound / finite locking range — the opposite of what the quoted answer claims.\n\n## If you actually wanted a static divider\n\nPut a weak inverter from **N3 back to N2**, and a second weak inverter from Inv₂'s output back to **N4** (cross‑coupled pairs, even inversion count around each storage node), or replace the switch+inverter latches with C²MOS/TSPC latches that include keepers. Then the dynamic nodes are held and the minimum‑frequency requirement disappears.",
        "format": "markdown",
        "sha256": "1c99be636bd067609be238b607ba9f06dcfc3649b4c698f3c132dd0da350777f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly rejects the keeper interpretation, identifies the red inverter as an unclocked feedforward path from before the CK switch to Inv1’s output, and explains both its high-speed benefit and its tendency to overpower the latch at low clock rates, raising the minimum usable frequency. Extra details do not undermine the essential answer.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1305,
        "output_tokens": 37984,
        "total_tokens": 39289,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36457,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1305,
        "output_tokens": 37984,
        "total_tokens": 39289,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36457,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## The two design equations you must juggle\n\nFor the complementary (current‑reuse) stage, let\n\n* $G_m = g_{m1}+g_{m2}$ (both devices carry the same bias current, so the inverter gives **twice the $G_m$ for the same $I_D$**)\n* $R_{out} = r_{O1}\\|r_{O2}\\|R_L$ , $A_0 \\equiv G_mR_{out}$ (open‑loop gain)\n\n**Input resistance (with $C_1$ a short):**\n\n$$R_{in}=\\frac{R_F+R_{out}}{1+G_mR_{out}}\\;\\simeq\\;\\underbrace{\\frac{1}{G_m}}_{\\text{\"}g_m\\text{\" part}}+\\underbrace{\\frac{R_F}{A_0}}_{\\text{feedback part}}$$\n\n**Voltage gain:** $\\;A_v=-\\dfrac{(G_mR_F-1)R_{out}}{R_F+R_{out}}$\n\n**Noise factor** (source noise, $R_F$ noise, and $4kT\\gamma(g_{m1}+g_{m2})$; note $R_{out}$ cancels because all noise sources see the same transfer denominator):\n\n$$\\boxed{F=1+\\frac{R_F}{R_S}\\left(\\frac{1+G_mR_S}{G_mR_F-1}\\right)^{2}+\\frac{\\gamma G_m}{R_S}\\left(\\frac{R_S+R_F}{G_mR_F-1}\\right)^{2}}$$\n\nFor $G_mR_F\\gg1$:\n\n$$F\\;\\approx\\;1+\\frac{R_S}{R_F}+\\frac{\\gamma}{G_mR_S}\\Big(1+\\frac{R_S}{R_F}\\Big)^{2}\\;\\xrightarrow[\\;R_F\\gg R_S\\;]{}\\;1+\\frac{1}{A_0}+\\frac{\\gamma}{G_mR_S}$$\n\n## What this tells you\n\n**Do *not* match by setting $1/G_m = 50\\,\\Omega$.** If $R_F\\to\\infty$ (or $A_0\\to\\infty$), matching forces $G_m = 1/R_S = 20$ mS, and then $\\gamma/(G_mR_S)=\\gamma$, i.e.\n\n$$NF\\ \\ge\\ 1+\\gamma\\ \\approx\\ 3\\text{–}4\\ \\text{dB}$$\n\nno matter what else you do. The whole point of the feedback is to let the **loop**, not $1/G_m$, set the 50 Ω.\n\n**Optimization recipe (keeping $R_{in}=50\\ \\Omega$):**\n\n1. **Make $G_mR_S\\gg1$** – i.e. $G_m\\gg20$ mS. This is pure power/area: wide devices, moderate inversion (high $g_m/I_D$), and the inverter topology itself (current reuse halves the current needed for a given $G_m$). Size $W_p/W_n$ so $g_{m1}\\approx g_{m2}$.\n2. **Maximize the open‑loop gain $A_0=G_mR_{out}$** (longer channels / cascode / don't load the output heavily), because the matching condition then gives a *large* feedback resistor:\n$$R_F=R_S(1+A_0)-R_{out}=R_S+R_{out}(G_mR_S-1)\\;\\approx\\;R_S A_0\\gg R_S$$\n3. **Pick $R_F$ from that equation, not independently.** A large $G_m$ *requires* a large $R_F$ to keep $R_{in}=50\\ \\Omega$ – and both of those lower NF ($R_S/R_F\\downarrow$ and $\\gamma/G_mR_S\\downarrow$). So the two noise terms are reduced by the *same* action.\n\n**Example:** $G_m=40$ mS ($=2/R_S$), $R_{out}=500\\ \\Omega \\Rightarrow R_F=50+500(2-1)=550\\ \\Omega$:\n$$F\\approx1+0.09+\\tfrac{1}{2}(1.09)^2=1.68 \\;\\Rightarrow\\; NF\\approx2.3\\ \\text{dB},\\qquad |A_v|\\approx10\\ (20\\ \\text{dB})$$\nversus ≈3.5 dB for the \"$G_m=20$ mS\" match.\n\n## Where it stops\n\n* **Power:** $NF-1\\propto \\gamma/(G_mR_S)$, so every dB costs current.\n* **Input capacitance:** large $W$ raises $C_{gs1}+C_{gs2}$, so $R_{in}$ stays resistive only up to $\\sim1/(R_SC_{in})$; eventually you need a series inductor/resonance and the match becomes narrowband.\n* **Gain/linearity/stability:** large $R_F$ means high gain → compression, and the output pole $R_{out}C_L$ must stay well above the band or the feedback becomes complex (peaking/instability).\n* **Headroom:** stacking two devices plus $V_{DS}$ for high $r_O$ limits $V_{DD}$ scaling.\n* Further improvement needs tricks beyond this topology: buffer the feedback path (so $R_F$ can be raised without loading the output), use capacitive/transformer feedback (noiseless), or add noise cancellation.",
        "format": "markdown",
        "sha256": "731c55b98cbed7fab1e647bbe30f216a11a8cb8153babe9c99f34339da92fb28"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It uses the finite-output-resistance matching relation, adjusts RF to keep Rin at 50 Ω, and correctly recommends raising gm above 1/Rs so NF can fall below 1 + γ. The limiting-case and numerical approximations do not change the essential design conclusion.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2687,
        "output_tokens": 21515,
        "total_tokens": 24202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19712,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2687,
        "output_tokens": 21515,
        "total_tokens": 24202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19712,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the problem\n\nCall\n\n* $G_m=g_{m1}+g_{m2}$ (the two devices are in \"current‑reuse\", both carry the same $I_D$ and both drive the output),\n* $R_{out}=r_{O1}\\|r_{O2}$ (plus any loading from the next stage),\n* $R_S=50\\ \\Omega$, and $C_1$ a short at the frequency of interest.\n\n**Input resistance (shunt‑feedback):**\n\n$$R_{in}=\\frac{R_F+R_{out}}{1+G_mR_{out}}\\;\\;\\Longrightarrow\\;\\; \\boxed{R_F=R_S+(G_mR_S-1)R_{out}}\\;\\;\\approx\\;G_mR_SR_{out}$$\n\n**Gain once the input is matched** ($R_{in}=R_S$):\n\n$$A_v=\\frac{v_{out}}{v_{in}}=\\frac{1}{2}\\left(1-\\frac{R_F}{R_S}\\right)\\approx-\\frac{R_F}{2R_S}$$\n\n**Noise figure** (R_F noise + channel noise of both devices, $\\;a\\equiv G_mR_S,\\;b\\equiv R_S/R_F$):\n\n$$NF=1+\\frac{b(1+a)^2+\\gamma a(1+b)^2}{(a-b)^2}\\;\\;\\xrightarrow[\\;b\\ll1\\;]{a\\gg1}\\;\\;NF\\approx 1+\\frac{R_S}{R_F}+\\frac{\\gamma}{G_mR_S}$$\n\n## What this tells you\n\n1. **Both noise terms want the same thing: large $R_F$ and large $G_m$ — and the 50‑Ω constraint ties them together.** From the match equation, $R_F$ is *not* a free parameter: for a given $G_m$ (and $R_{out}$) it is pinned. The only way to make $R_F$ big (small $R_S/R_F$, high gain) is to make $G_m$ big.\n\n2. **Don't try to meet the match with $G_m=1/R_S$.** If you neglect $\\lambda$, $R_{in}\\to 1/G_m$, so $G_m=20$ mS and $R_F$ must shrink toward $R_S$; then $NF\\to 1+\\gamma$ (≈3 dB) at best. You must deliberately design $G_mR_S\\gg1$ and let the feedback resistor (not $1/G_m$) do the matching.\n\n3. **Recipe:**\n * Maximize $G_m$ per unit current: that is exactly why the inverter is used (two $g_m$'s for one $I_D$ ⇒ ~2× better noise/power than a single NMOS). Bias in moderate inversion (high $g_m/I_D$), and size $W_p\\approx(2\\!-\\!3)W_n$ so $g_{mp}\\approx g_{mn}$.\n * Keep $R_{out}$ high (longer $L$, high‑impedance/next‑stage loading, or cascoding) — a larger $R_{out}$ permits a larger $R_F$ at the same $G_m$.\n * Then set $R_F=R_S+(G_mR_S-1)R_{out}$ for the 50‑Ω match.\n * Residual: $NF\\approx1+\\dfrac{1}{2|A_v|}+\\dfrac{\\gamma}{G_mR_S}$ → **the floor is set by power consumption**, not by the topology.\n\n**Example:** $G_m\\!=\\!90$ mS ($G_mR_S\\!=\\!4.5$), $R_{out}\\!\\approx\\!340\\ \\Omega$ ⇒ $R_F\\!\\approx\\!1.25$ k$\\Omega$ gives $R_{in}=50\\ \\Omega$, $|A_v|\\approx12$ (21 dB), and $NF\\approx 1+0.04+0.22\\approx1\\ \\text{dB}$ (γ = 1). With $G_m=20$ mS you could not do better than ≈3 dB.\n\n## Limits on \"just make $G_m$ and $R_F$ bigger\"\n\n* **Power/area:** $G_m\\propto I_D$ — this is the real cost.\n* **Input capacitance:** $C_{gs1}+C_{gs2}+$ Miller $C_{gd}$ grows with $G_m$ and ruins the *broadband* 50‑Ω match (and adds a loop pole); this caps the useful $G_m$ at a given frequency.\n* **Linearity:** $|A_v|=R_F/2R_S$, so a large $R_F$ means high gain → early compression / poor IIP3.\n* **Loop bandwidth/stability** with $R_F$, $C_{in}$, $C_L$.\n* **Headroom & biasing:** the stacked NMOS/PMOS need $V_{DD}>V_{ov1}+V_{ov2}+\\ldots$, and because $R_F$ self‑biases the inverter at its trip point, $I_D$ (hence $G_m$ and the match) drifts with PVT — replica biasing is usually required.",
        "format": "markdown",
        "sha256": "d2b2bd7ef9562f86974da11cab95c653d3a3a6260dba72ee05a8f94fbe785686"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly includes finite output resistance in the input-match relation and explains that gm can exceed 1/Rs while RF is increased to preserve Rin, allowing NF below 1 + gamma. Its recommendation to increase gm and RF while keeping Rout high is consistent with the golden solution; the extra implementation details do not undermine the central reasoning.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2687,
        "output_tokens": 22217,
        "total_tokens": 24904,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20509,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2687,
        "output_tokens": 22217,
        "total_tokens": 24904,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20509,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the problem\n\nWith both gates tied to the input node, M₁ and M₂ form a *current‑reuse (inverter) transconductor*:\n\n$$G_m=g_{m1}+g_{m2},\\qquad R_{out}=r_{O1}\\|r_{O2},\\qquad |A_v|\\simeq G_mR_{out}$$\n\nand R_F provides shunt–shunt feedback. The standard results are\n\n$$\\boxed{R_{in}=\\frac{R_F+R_{out}}{1+G_mR_{out}}\\simeq\\frac{R_F}{1+|A_v|}}$$\n\nFor the noise figure, computing the output noise of R_F and of the channel noise of the two devices (γ(g_{m1}+g_{m2}) ≈ γG_m) and normalizing to the noise of R_S gives\n\n$$\\boxed{\\;\\mathrm{NF}\\simeq 1+\\frac{R_S}{R_F}\\left(1+\\frac{1}{G_mR_S}\\right)^{2}+\\frac{\\gamma}{G_mR_S}\\;}$$\n\n(Check: for R_F → ∞ this reduces to the unmatched CS result NF = 1 + γ/(G_mR_S).)\n\n## The constrained optimization\n\nThe matching requirement is **not** a free choice of R_F — it links R_F to G_m:\n\n$$R_F=R_S\\,(1+G_mR_{out})=R_S(1+|A_v|)=50\\,\\Omega\\,(1+|A_v|)$$\n\nSubstituting into the NF expression:\n\n$$\\mathrm{NF}\\simeq 1+\\frac{\\left(1+\\dfrac{1}{G_mR_S}\\right)^{2}}{1+G_mR_{out}}+\\frac{\\gamma}{G_mR_S}\n\\;\\xrightarrow[\\;G_mR_S\\gg1\\;]{}\\;1+\\frac{1}{|A_v|}+\\frac{\\gamma}{G_mR_S}$$\n\nThis is **monotonically decreasing in G_m**. So, with R_in pinned at 50 Ω, there is essentially one knob:\n\n1. **Make G_m = g_{m1}+g_{m2} as large as possible** (wider devices + more bias current). This directly suppresses the channel‑noise term γ/(G_mR_S).\n2. **Then raise R_F proportionally**, R_F = R_S(1+G_mR_{out}), to restore the 50 Ω match. Because R_F ≫ R_S, the feedback resistor contributes only ≈ R_S/R_F ≈ 1/|A_v| — this is exactly why this topology beats a brute‑force 50 Ω shunt termination (which would floor the NF at 3 dB).\n3. **Maximize the gain** (long‑channel or cascoded devices, or an added load), since a larger |A_v| = G_mR_{out} permits a larger R_F for the same R_in.\n4. **Exploit the current reuse**: stacking the PMOS on the NMOS gives G_m = g_{m1}+g_{m2} for a *single* bias current — roughly twice the g_m (≈3 dB better noise) at the same power. Size W_p ≈ 2–3 W_n so both devices contribute comparable g_m, and bias in moderate inversion to maximize g_m/I_D.\n\n**Example:** for γ ≈ 1 and NF ≈ 1 dB (F ≈ 1.26) you need γ/(G_mR_S) ≈ 0.2 → G_m ≈ 100 mS (several mA), and with |A_v| ≈ 10, R_F ≈ 550 Ω, giving F ≈ 1 + 0.09 + 0.2 ≈ 1.1 dB.\n\n## What stops you\n\n- **Power**: NF improves only as 1/G_m, i.e. roughly as 1/I_D (or 1/√I_D in strong inversion) — classic noise/power trade‑off.\n- **Input capacitance**: C_in ≈ C_{gs1}+C_{gs2}+(1+|A_v|)C_{gd} grows with W. Once 1/(ωC_in) approaches 50 Ω the real match degrades (R_in becomes complex) and the NF rises, so the useful G_m is capped at the operating frequency (or needs an input/series inductor to tune C_in out).\n- **Headroom/linearity**: raising |A_v| by increasing R_{out} (or adding a load resistor) eats into V_DD and compresses the stage.",
        "format": "markdown",
        "sha256": "8f67005f1793db662814966cec707f9a188e1c0565578abf88aa5432d44bacd4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer correctly identifies the finite-output-resistance mechanism and the main conclusion: increase gm and adjust RF so gm can exceed 1/Rs and NF can fall below 1+γ. But solving its stated input-resistance relation for a 50 Ω match gives RF = Rs(1+gmro) − ro, not Rs(1+gmro). Thus its proposed RF and numerical example do not actually preserve the 50 Ω match (the example gives about 59 Ω). This is a significant but localized error.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2687,
        "output_tokens": 9563,
        "total_tokens": 12250,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8051,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2687,
        "output_tokens": 9563,
        "total_tokens": 12250,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8051,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nThe circuit is a **shunt–shunt (voltage‑sensing, current‑returning) feedback transimpedance amplifier**:\n\n* $M_1$ + $R_{D1}$ : inverting CS stage, $P \\rightarrow X$\n* $M_2$–$M_3$ (PMOS pair, tail $I_{SS}$): $M_2$ is driven at its gate by $X$, and its drain current is \"stolen\" from $M_3$, whose drain drives $V_{out}$ across $R_{D2}$ → **non‑inverting** stage, $X \\rightarrow V_{out}$\n* $R_F$ returns a current proportional to $V_{out}$ back to node $P$.\n\nSince $P\\rightarrow X$ is inverting and $X\\rightarrow$ out is non‑inverting, the loop is negative, so $R_F$ **lowers** the input resistance.\n\n## Forward (open‑loop) gain\n\n**Stage 1:** $\\;v_X=-g_{m1}R_{D1}\\,v_P$  (gate of $M_2$ draws no current)\n\n**Stage 2:** With the tail node $T$ floating ($I_{SS}$ ideal), KCL at $T$:\n\n$$g_{m2}(v_T-v_X)+g_{m3}v_T=0\\;\\Rightarrow\\;v_T=\\frac{g_{m2}}{g_{m2}+g_{m3}}v_X$$\n\nThe current delivered by $M_3$ into the output node is therefore\n\n$$i_{d3}=g_{m3}v_T=\\underbrace{\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}}_{\\textstyle G_m}\\,v_X \\quad\\Longrightarrow\\quad \\frac{v_{out}}{v_X}=+G_mR_{D2}$$\n\n## Input resistance (KCL at P and at the output)\n\n$$G_mv_X+\\frac{v_P-v_{out}}{R_F}=\\frac{v_{out}}{R_{D2}},\\qquad v_X=-g_{m1}R_{D1}v_P$$\n\n$$\\Rightarrow v_{out}=\\frac{R_{D2}\\left(1-g_{m1}R_{D1}G_mR_F\\right)}{R_F+R_{D2}}\\;v_P$$\n\nThe current drawn from the input node through $R_F$:\n\n$$i=\\frac{v_P-v_{out}}{R_F}=v_P\\,\\frac{1+g_{m1}R_{D1}G_mR_{D2}}{R_F+R_{D2}}$$\n\n$$\\boxed{\\,R_{in}=\\frac{R_F+R_{D2}}{1+g_{m1}R_{D1}\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}R_{D2}}=\\frac{R_F+R_{D2}}{1+|A_v|}\\,}$$\n\n(The same result follows from feedback theory: $R_{in,open}=R_F+R_{D2}$, loop gain $T=g_{m1}R_{D1}G_mR_{D2}$.)\n\nIncluding the input capacitance, the total input impedance seen by $I_{in}$ is\n\n$$Z_{in}(s)=\\frac{1}{sC_{in}}\\;\\Big\\|\\;\\frac{R_F+R_{D2}}{1+g_{m1}R_{D1}\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}R_{D2}}$$\n\n## Special cases\n\nFor matched pair $g_{m2}=g_{m3}=g_m$:\n\n$$R_{in}=\\frac{R_F+R_{D2}}{1+\\tfrac{1}{2}g_{m1}g_mR_{D1}R_{D2}}\\;\\xrightarrow[\\;R_F\\gg R_{D2}\\;]{|A_v|\\gg1}\\;\\frac{2R_F}{g_{m1}g_mR_{D1}R_{D2}}$$\n\n(If channel‑length modulation is kept, simply replace $R_{D1}\\to R_{D1}\\|r_{O1}$ and $R_{D2}\\to R_{D2}\\|r_{O3}$.)",
        "format": "markdown",
        "sha256": "11e4877d289be1d68bae8c6232e070d42329f02eefbef22067f92b13821adc41"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact input resistance, including the output-side resistance: (RF + RD2)/(1 + A0). Its gain expression reduces to the golden A0 = (1/2)gm1gm2,3RD1RD2 for a matched pair.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 225,
        "output_tokens": 9344,
        "total_tokens": 9569,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7910,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 225,
        "output_tokens": 9344,
        "total_tokens": 9569,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7910,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\n**Topology:** This is a shunt–shunt (transimpedance) feedback amplifier:\n\n* **Stage 1:** $M_1$ is a common‑source stage loaded by $R_{D1}$ → $v_X=-g_{m1}R_{D1}\\,v_P$\n* **Stage 2:** $M_2$–$M_3$ with tail source $I_{SS}$ form a differential pair driven single‑endedly at the gate of $M_2$ (node $X$), with $V_b$ as the AC‑ground input and the output taken at the drain of $M_3$ across $R_{D2}$.\n* **Feedback:** $R_F$ returns $V_{out}$ to the gate of $M_1$ (node $P$).\n\nAssume $\\lambda=\\gamma=0$ and an ideal tail current source.\n\n**Transconductance of stage 2.** With $v_S$ the tail node, KCL at $S$ gives $g_{m2}(v_S-v_X)+g_{m3}v_S=0$, so\n\n$$v_S=\\frac{g_{m2}}{g_{m2}+g_{m3}}v_X ,\\qquad \ni_{D3}=g_{m3}v_S=\\underbrace{\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}}_{G_m}\\,v_X\\;\\;\\xrightarrow[\\;g_{m2}=g_{m3}=g_m\\;]{}\\;\\frac{g_m}{2}v_X$$\n\n## Nodal Analysis at P and Output\n\nSince the gate of $M_1$ draws no current, **all** of $I_{in}$ flows through $R_F$:\n\n$$i_{in}=\\frac{v_P-v_{out}}{R_F}$$\n\nAt the output node (current from $M_3$ plus the feedback current flow into $R_{D2}$):\n\n$$v_{out}=R_{D2}\\Big(i_{in}+G_m v_X\\Big)=R_{D2}\\Big(\\frac{v_P-v_{out}}{R_F}-G_m g_{m1}R_{D1}v_P\\Big)$$\n\nSolving,\n\n$$\\frac{v_{out}}{v_P}=\\frac{R_{D2}\\big(1-G_mg_{m1}R_{D1}R_F\\big)}{R_F+R_{D2}}\n\\;\\;\\Longrightarrow\\;\\;\n1-\\frac{v_{out}}{v_P}=\\frac{R_F\\big(1+g_{m1}R_{D1}G_mR_{D2}\\big)}{R_F+R_{D2}}$$\n\n## Result\n\n$$\\boxed{\\;R_{in}=\\frac{v_P}{i_{in}}=\\frac{R_F+R_{D2}}{1+g_{m1}R_{D1}\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}R_{D2}}\n\\;\\simeq\\;\\frac{R_F+R_{D2}}{1+\\tfrac12 g_{m1}g_{m2}R_{D1}R_{D2}}\\;}$$\n\ni.e. $R_{in}=\\dfrac{R_F+R_{D2}}{1+A_v}$, where $A_v=g_{m1}R_{D1}\\cdot\\frac{1}{2}g_{m2}R_{D2}$ is the open‑loop gain from $P$ to $V_{out}$ (negative feedback, since the CS stage inverts and the pair does not).\n\n**Checks / notes**\n\n* If the gain vanishes ($g_m\\to0$), $R_{in}\\to R_F+R_{D2}$ — just $R_F$ in series with $R_{D2}$, as expected.\n* For large loop gain, $R_{in}\\approx R_F/(\\tfrac12 g_{m1}g_{m2}R_{D1}R_{D2})$ — the feedback divides $R_F$ down.\n* Including the explicit input capacitor,\n$$Z_{in}=R_{in}\\,\\Big\\|\\,\\frac{1}{sC_{in}}=\\frac{R_{in}}{1+sR_{in}C_{in}},$$\nso the input pole sits at $\\omega_{in}=1/(R_{in}C_{in})$ — pushed to high frequency by the feedback.\n* With channel‑length modulation, replace $R_{D1}\\to R_{D1}\\|r_{O1}$ and $R_{D2}\\to R_{D2}\\|R_{out2}$.",
        "format": "markdown",
        "sha256": "04f9f5e2bc1efdfe13b07b46dd4842dd66557455812504da00cd4a854cdb269d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer derives the exact input resistance, including the output-side resistance term: (RF + RD2)/(1 + A0), with the correct two-stage gain. The later large-gain approximation is somewhat imprecise unless RF dominates RD2, but it does not undermine the correct main result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 225,
        "output_tokens": 11674,
        "total_tokens": 11899,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10158,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 225,
        "output_tokens": 11674,
        "total_tokens": 11899,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10158,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nThe circuit is a **shunt–shunt (voltage‑sensing, current‑returning) feedback amplifier**: $R_F$ senses $V_{\\rm out}$ and returns a current to node $P$. To find $R_{\\rm in}$ (the resistance seen looking to the right of node $P$, i.e. excluding $I_{\\rm in}$ and $C_{\\rm in}$), note that the gate of $M_1$ draws no current, so **all of the test current flows through $R_F$**.\n\n**Stage 1 ($M_1$, $R_{D1}$):** common source, inverting\n\n$$\\frac{v_X}{v_P}=-g_{m1}R_{D1}\\equiv -A_1$$\n\n**Stage 2 ($M_2,M_3,I_{SS},R_{D2}$):** a source‑coupled pair driven single‑endedly at $M_2$ with the output taken at the *opposite* drain ($M_3$). Since the tail is a current source, $i_{d2}+i_{d3}=0$, and with $v_{Y}=\\frac{g_{m2}}{g_{m2}+g_{m3}}v_X$:\n\n$$\\frac{v_{\\rm out}}{v_X}\\Big|_{\\rm open}=+\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}R_{D2}\\;\\xrightarrow[g_{m2}=g_{m3}=g_{m}]{}\\;+\\frac{g_mR_{D2}}{2}\\equiv A_2 ,\\qquad R_{\\rm out}=R_{D2}$$\n\n(The *non‑inverting* second stage is what makes the overall forward gain inverting, i.e. the feedback negative.)\n\n## Solving\n\nWriting KCL at the output node (Thévenin source $A_2v_X$ in series with $R_{D2}$, plus $R_F$ returning to $v_P$):\n\n$$v_{\\rm out}=\\frac{A_2v_X R_F+v_P R_{D2}}{R_F+R_{D2}}\\;\\Rightarrow\\; v_P-v_{\\rm out}=\\frac{R_F\\,(v_P-A_2v_X)}{R_F+R_{D2}}=\\frac{R_F\\,v_P\\,(1+A_1A_2)}{R_F+R_{D2}}$$\n\nThe input current is $i_{\\rm in}=(v_P-v_{\\rm out})/R_F$, hence\n\n$$\\boxed{\\;R_{\\rm in}=\\frac{v_P}{i_{\\rm in}}=\\frac{R_F+R_{D2}}{1+A_1A_2}=\\frac{R_F+R_{D2}}{1+\\dfrac{1}{2}g_{m1}g_{m2}R_{D1}R_{D2}}\\;}$$\n\n(generally $R_{\\rm in}=\\dfrac{R_F+R_{D2}}{1+g_{m1}R_{D1}\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}R_{D2}}$; include $r_O$ by using $R_{D1}\\|r_{O1}$ and $R_{D2}\\|r_{O3}$.)\n\n## Remarks\n\n* For a large loop gain and $R_F\\gg R_{D2}$:\n$$R_{\\rm in}\\approx \\frac{R_F}{1+|A_0|}\\approx\\frac{2R_F}{g_{m1}g_{m2}R_{D1}R_{D2}}$$\ni.e. the feedback divides $R_F$ by the open‑loop gain $|A_0|=\\tfrac12 g_{m1}g_{m2}R_{D1}R_{D2}$.\n\n* The complete input impedance is $Z_{\\rm in}=R_{\\rm in}\\,\\|\\,\\dfrac{1}{sC_{\\rm in}}$; because $R_{\\rm in}$ is very small, the input pole $1/(R_{\\rm in}C_{\\rm in})$ is pushed to a high frequency — the usual objective in such a transimpedance (e.g. photodiode) amplifier.",
        "format": "markdown",
        "sha256": "9421b35b1e7f6da4f741d80dd7428272d6c1c391ca5ecb7038511814c4878077"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact input resistance, \\(R_{in}=(R_F+R_{D2})/(1+A_0)\\), and the matching unloaded gain, including the output-side resistance of the feedback path. The stage-gain derivation is consistent with the stated equal-device approximation.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 225,
        "output_tokens": 13843,
        "total_tokens": 14068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 225,
        "output_tokens": 13843,
        "total_tokens": 14068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## The idea\n\nThe LDO's output noise sits directly on the VCO supply node (`V_out`), which is the top of the tank. Because the oscillation frequency depends on the supply (\"supply pushing\"), this noise voltage **frequency‑modulates** the VCO. So the computation has three steps:\n\n**1. Get the supply‑pushing gain of the VCO**\n\n$$K_{VDD}=\\frac{\\partial f_{osc}}{\\partial V_{out}}\\quad[\\mathrm{Hz/V}]\\qquad \\text{(or } K_{VDD}'=2\\pi K_{VDD}\\ \\text{in rad/s/V)}$$\n\nIn this topology the mechanisms are: (a) `V_out` sets the dc level at X and Y, so with `V_cont` fixed it changes the varactor bias ⇒ changes $C_{var}$; (b) it changes the output swing, which through the nonlinear C–V of $M_{v1,v2}$ and the $C_{GD}/C_{DB}$ of $M_1,M_2$ gives AM‑to‑FM conversion. Both are captured automatically by simulating the oscillator while stepping `V_out` and measuring $f_{osc}$ (slope of $f_{osc}$ vs. $V_{out}$ at the operating point).\n\n**2. Refer the LDO noise to that node**\n\n$S_{th}(f)$ must be the *output‑referred* noise PSD of the LDO at $V_{out}$ (V²/Hz), i.e. the reference/error‑amp/pass‑device noise shaped by the LDO loop gain, and further filtered by the decoupling capacitance and the LDO output impedance at the offset frequencies of interest. Only the noise at offsets $\\Delta f$ comparable to the offsets where you want the phase noise matters.\n\n**3. Convert FM to phase noise**\n\nA noise component at offset $\\Delta f$ acts like a small sinusoidal supply tone: $v_n=V_m\\cos(2\\pi \\Delta f\\,t)$ gives frequency deviation $\\Delta f_{dev}=K_{VDD}V_m$ and phase deviation (modulation index)\n\n$$\\beta=\\frac{K_{VDD}V_m}{\\Delta f}\\ll 1 ,$$\n\nso each sideband has relative power $(\\beta/2)^2$. Replacing $V_m^2/2\\rightarrow S_{th}(\\Delta f)\\,df$:\n\n$$\\boxed{\\;S_\\phi(\\Delta f)=\\frac{K_{VDD}^{2}\\,S_{th}(\\Delta f)}{\\Delta f^{2}}\\ \\ \\left[\\frac{\\mathrm{rad^2}}{\\mathrm{Hz}}\\right],\\qquad \nL(\\Delta f)=\\frac{S_\\phi}{2}=\\frac{K_{VDD}^{2}S_{th}(\\Delta f)}{2\\,\\Delta f^{2}}\\ \\ \\left[\\frac{\\mathrm{dBc}}{\\mathrm{Hz}}\\right]\\;}$$\n\n(equivalently $L=\\dfrac{K_{VDD}'^{\\,2}S_{th}}{2(2\\pi\\Delta f)^2}$ if the pushing gain is in rad/s/V).\n\nFinally, add this (power‑wise, since it is uncorrelated with the tank/transistor noise) to the VCO's intrinsic phase noise.\n\n## Notes\n\n- A **flat (white)** $S_{th}$ produces a $1/\\Delta f^{2}$ phase‑noise skirt, i.e. –20 dB/dec, exactly like the tank's own thermal region — so LDO thermal noise can easily dominate if $K_{VDD}$ is large. The LDO's flicker noise would give a $1/\\Delta f^{3}$ component.\n- Example: $K_{VDD}=50$ MHz/V, $\\sqrt{S_{th}}=10\\,\\mathrm{nV/\\sqrt{Hz}}$, $\\Delta f=1$ MHz:\n$$L=\\frac{(5\\times10^{7})^{2}(10^{-16})}{2(10^{6})^{2}}=1.25\\times10^{-13}\\Rightarrow -129\\ \\mathrm{dBc/Hz}.$$\n- This treatment assumes narrowband FM ($\\beta\\ll1$); it also neglects noise components near $2f_0$, $3f_0$, … which can mix down — those require a time‑varying (ISF/conversion‑gain) analysis.\n- Design implication: either lower $K_{VDD}$ (e.g., bias the varactors so the tank's dc level doesn't move the C–V curve, use a tail/cascode to isolate the supply) or lower $S_{th}$ (larger LDO devices, filtered reference, big decoupling cap at $V_{out}$).",
        "format": "markdown",
        "sha256": "fea56c2eb99e563dbbe5603e416aaf2869a4acd71301defa1c1880a64db74ae4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, defines the sensitivity dfosc/dVout, and converts LDO noise through FM-to-phase conversion with the required 1/Δf² dependence. It also captures the direct varactor coupling and the benefit of reducing the pushing gain; minor notation and extra modeling details do not affect the essential answer.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3732,
        "output_tokens": 3682,
        "total_tokens": 7414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2044,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3732,
        "output_tokens": 3682,
        "total_tokens": 7414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2044,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## The idea: supply noise → FM of the oscillator\n\nThe LDO output node *is* the VCO supply, so any noise voltage $v_n(t)$ riding on $V_{\\rm out}$ modulates the oscillation frequency through the VCO's **supply pushing** (supply sensitivity)\n\n$$K_{VDD}=\\frac{\\partial \\omega_{osc}}{\\partial V_{out}}\\Big|_{\\rm op}\\quad\\text{[rad/s/V]}\\qquad\\Big(\\text{or } \\frac{\\partial f_{osc}}{\\partial V_{out}}\\ \\text{[Hz/V]}\\Big)$$\n\nIn this topology the pushing is not zero even though a tail current source is used: $V_{\\rm out}$ sets the dc common‑mode level at $X$ and $Y$, hence the bias across $M_{v1,v2}$ (varactor capacitance) and across the drain junction/overlap capacitances of $M_1,M_2$, and it also changes the swing (AM→PM). $K_{VDD}$ is obtained by simulation: sweep $V_{\\rm out}$ by ±10–50 mV and take the slope of $f_{osc}$.\n\n## Step 1 — Model the VCO as an ideal frequency modulator\n\n$$\\omega_{out}(t)=\\omega_0+K_{VDD}\\,v_n(t)\\;\\Longrightarrow\\;\\phi_n(t)=K_{VDD}\\!\\int\\! v_n(t)\\,dt$$\n\nSo the transfer function from supply noise to excess phase is $\\phi_n/v_n = K_{VDD}/s$, i.e. a **1/f²-shaping** of the noise.\n\n## Step 2 — Translate the spectrum\n\n$$\\boxed{S_\\phi(\\Delta\\omega)=\\frac{K_{VDD}^{2}}{\\Delta\\omega^{2}}\\,S_{th}(\\Delta\\omega)}\\qquad [\\mathrm{rad^2/Hz}]$$\n\nand the single‑sideband phase noise relative to the carrier is\n\n$$\\mathcal{L}(\\Delta\\omega)=\\tfrac{1}{2}S_\\phi(\\Delta\\omega)=\\frac{K_{VDD}^{2}S_{th}}{2\\,\\Delta\\omega^{2}}\n\\;=\\;\\frac{K_{VDD,Hz}^{2}\\,S_{th}}{2\\,\\Delta f^{2}}\\quad[\\mathrm{dBc/Hz}]$$\n\n(Equivalently: view each noise component at offset $f_m$ as a sinusoid of amplitude $V_0$, $V_0^2=2S_{th}\\Delta f$; it creates FM sidebands of relative magnitude $\\beta/2 = K_{VDD}V_0/(2f_m)$, whose power gives the same result.)\n\nSince $S_{th}$ is uncorrelated with the VCO's own device noise, the two phase‑noise contributions simply add in power.\n\n## Step 3 — Don't forget the shaping around the noise\n\n* **Decoupling at $V_{\\rm out}$:** the LDO's closed‑loop output resistance together with the on‑chip decap at $V_{\\rm out}$ low‑pass filters $S_{th}$ before it reaches the tank, so use the *filtered* spectrum $S_{th}(f)|H_{LDO}(f)|^2$.\n* **Inside a PLL:** this is VCO‑referred noise, so it is high‑pass shaped by $|1-H(s)|^2$; only the portion of $S_{th}$ beyond the loop bandwidth survives. (That is why LDO *flicker* noise, which lives at low offsets, is usually harmless, while its thermal floor at MHz offsets is the dangerous part.)\n\n## Quick numerical check\n\nWith $K_{VDD}=50$ MHz/V and an LDO output noise floor of $10\\ \\mathrm{nV/\\sqrt{Hz}}$ ($S_{th}=10^{-16}\\,\\mathrm{V^2/Hz}$) at $\\Delta f = 1$ MHz:\n\n$$S_\\phi=\\frac{(50\\times10^{6})^{2}(10^{-16})}{(10^{6})^{2}}=2.5\\times10^{-13}\\ \\mathrm{rad^2/Hz}\n\\Rightarrow \\mathcal{L}=1.25\\times10^{-13}\\equiv -129\\ \\mathrm{dBc/Hz}$$\n\nwhich is comparable to a good VCO's own phase noise — hence the need for either a very low‑noise LDO or a VCO designed for small $K_{VDD}$ (and heavy decoupling on $V_{\\rm out}$).",
        "format": "markdown",
        "sha256": "a4e49a5b77ebd1df846e6e2cd8072babba3bfa8e93f14039507a79ebc4452591"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing, derives the FM-to-phase-noise conversion with the 1/Δf² dependence, and recognizes the direct varactor path. It misses the stated design insight that this makes Kpush closely related to KVCO and that lowering KVCO reduces the conversion; recommending a lower K_VDD is related but does not explicitly make that connection.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3732,
        "output_tokens": 3963,
        "total_tokens": 7695,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2372,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3732,
        "output_tokens": 3963,
        "total_tokens": 7695,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2372,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## The mechanism\n\nThe LDO's noise sits directly on the VCO supply rail $V_{\\rm out}$. In this oscillator the supply does **not** set the tail current (that's $I_{\\rm VCO}$), but it still sets\n\n* the dc common‑mode level at $X$ and $Y$ (= $V_{\\rm out}$, since the inductors are dc shorts), hence the reverse bias of the varactors $M_{v1},M_{v2}$ (whose other terminal is at $V_{\\rm cont}$), and\n* the oscillation amplitude, which through the nonlinear $C$–$V$ of the varactors and of $M_1,M_2$ also shifts the average capacitance.\n\nSo a change in $V_{\\rm out}$ changes $\\omega_{\\rm osc}$. Quantify this with the **supply‑pushing (supply‑sensitivity) factor**\n\n$$K_{VDD}=\\frac{\\partial f_{\\rm osc}}{\\partial V_{\\rm out}}\\;[\\text{Hz/V}]\\qquad\\text{or}\\qquad K_{VDD}^{(\\omega)}=2\\pi K_{VDD}\\;[\\text{(rad/s)/V}]$$\n\nobtained by sweeping $V_{\\rm out}$ in simulation (or measurement) and recording $f_{\\rm osc}$. **The supply then acts exactly like a second control port of the VCO.**\n\n## The calculation\n\nTreat $v_n(t)$ (the LDO noise at $V_{\\rm out}$) as a control voltage:\n\n$$\\omega_{\\rm out}(t)=\\omega_0+2\\pi K_{VDD}\\,v_n(t),\\qquad \n\\phi_n(t)=2\\pi K_{VDD}\\!\\int\\! v_n\\,dt \\;\\Rightarrow\\; \\frac{\\Phi_n}{V_n}(s)=\\frac{2\\pi K_{VDD}}{s}$$\n\nBecause the VCO integrates frequency into phase, the noise is shaped by $1/\\Delta\\omega^{2}$:\n\n$$\\boxed{\\,S_\\phi(\\Delta f)=\\frac{(2\\pi K_{VDD})^2}{(2\\pi \\Delta f)^2}\\,S_{\\rm th}(\\Delta f)=\\frac{K_{VDD}^{2}}{\\Delta f^{2}}\\,S_{\\rm th}(\\Delta f)\\ \\ \\left[\\frac{\\rm rad^2}{\\rm Hz}\\right]}$$\n\nand the single‑sideband phase noise (for small phase deviations) is\n\n$$\\mathcal{L}(\\Delta f)=\\tfrac12 S_\\phi(\\Delta f)=\\frac{K_{VDD}^{2}\\,S_{\\rm th}(\\Delta f)}{2\\,\\Delta f^{2}}\\quad\\text{[dBc/Hz after }10\\log_{10}]$$\n\n(The same result follows from narrowband FM: a noise tone $V_m\\cos\\omega_mt$ gives $\\beta=K_{VDD}V_m/f_m$ and sidebands of relative power $(\\beta/2)^2$, with $V_m^2/2\\to S_{\\rm th}\\,df$.)\n\n**Numerical feel:** $K_{VDD}=100$ MHz/V and an LDO output noise of $10\\,\\mathrm{nV/\\sqrt{Hz}}$ ($S_{\\rm th}=10^{-16}\\,\\mathrm{V^2/Hz}$) give, at 1 MHz offset,\n$S_\\phi = (10^{8})^2(10^{-16})/(10^{12})=10^{-12}$ rad²/Hz, i.e. $\\mathcal{L}=-123$ dBc/Hz — often comparable to the VCO's own phase noise. This is why LDO noise must be specified in nV/√Hz, not just in terms of ripple rejection.\n\n## Practical refinements\n\n1. **Use the actual $S_{\\rm th}(f)$ at $V_{\\rm out}$**, not the raw op‑amp noise: the LDO error‑amplifier noise is amplified by $(1+R_1/R_2)$, the reference/flicker noise adds a $1/f$ region, and above the LDO loop bandwidth the output capacitance $C_{\\rm dec}$ (plus the pass device's $1/g_m$) low‑pass filters it. So $S_{\\rm th}$ typically has a $1/f$ part (→ $1/\\Delta f^{3}$ phase noise) and a white part (→ $1/\\Delta f^{2}$).\n2. If the supply sensitivity itself is frequency dependent (decoupling at $V_{\\rm out}$, finite VCO supply rejection), replace $K_{VDD}^2$ by $|K_{VDD}(j\\Delta\\omega)|^2$, i.e. multiply $S_{\\rm th}$ by $|H_{\\rm supply}(j\\Delta\\omega)|^2$.\n3. Only the FM component matters; AM induced on the supply is largely limited by the amplitude‑limiting action, except insofar as it is converted to FM by the varactors (already lumped into $K_{VDD}$).\n4. **Add powers, not amplitudes:** $S_{\\phi,\\rm tot}=S_{\\phi,\\rm VCO}+K_{VDD}^2S_{\\rm th}/\\Delta f^2+\\dots$, and if the VCO is inside a PLL, this contribution is high‑pass filtered by the loop (suppressed below the loop bandwidth).\n\nA useful design rule that falls out: keep $K_{VDD}$ small (cascode/filtered tail, supply‑insensitive common‑mode biasing, small varactor $K_{VCO}$) so that the LDO's inevitable thermal noise doesn't dominate.",
        "format": "markdown",
        "sha256": "14ef0a092fd8408b5071e8e42fe0493b984e9ed8b2e47e3a1e9c0e511f69375c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, converts LDO voltage noise through dfosc/dVout and the 1/Δf² FM-to-phase-noise relation, and notes that the direct varactor coupling links supply sensitivity to KVCO. The main result matches the golden solution; extra factors and refinements do not undermine it.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3732,
        "output_tokens": 4682,
        "total_tokens": 8414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2719,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3732,
        "output_tokens": 4682,
        "total_tokens": 8414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2719,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nThe phase noise **improves** – mainly because C_T kills the contribution of the tail current source, whose noise around **2ω₀** is otherwise down‑converted into the carrier sidebands. But the benefit saturates and brings its own penalty (tank loading in triode), which is why the capacitor is usually accompanied by a tail inductor.\n\n## Why\n\n**1. The tail is a mixer input.** M₁–M₂ commutate the tail current at ω₀, so the tail node sees an effective LO. Any noise component of I_SS at **2ω₀ ± Δω** is translated by this switching to **ω₀ ± Δω**, i.e. it lands right at the carrier and appears (partly) as phase noise. Noise near DC and near 2ω₀ are therefore the dangerous components of the tail device's noise.\n\n**2. What C_T does.** The tail noise current now splits between C_T and the impedance looking into the sources of the switching pair (≈ 1/g_m, or 2/g_m when both are on):\n\n$$\\frac{i_{n,\\text{tank}}}{i_{n,SS}}\\;\\approx\\;\\frac{1/(2\\omega_0C_T)}{1/(2\\omega_0C_T)+1/g_m}$$\n\nSo if\n\n$$\\frac{1}{2\\omega_0 C_T}\\ll \\frac{1}{g_m}\\quad\\Longrightarrow\\quad C_T\\gg \\frac{g_m}{2\\omega_0},$$\n\nessentially all of the 2ω₀ noise (and the higher harmonics) is shunted to ground instead of being up/down‑converted into the tank. The 1/f² (and part of the 1/f³) noise coming from the tail transistor drops accordingly.\n\n**3. Secondary benefit.** C_T also absorbs the second‑harmonic (common‑mode) current that the pair pumps into the tail node, so the tail voltage stays quieter and the differential pair switches more abruptly – less time is spent in the \"both devices on\" region where both contribute noise with a large ISF.\n\n## Caveats\n\n- **It does nothing for flicker noise of I_SS.** Low‑frequency tail noise modulates the oscillation amplitude and is converted to phase noise through AM/PM (varactor nonlinearity, Groszkowski shift); C_T is an open circuit there.\n- **Tank loading.** With C_T a large capacitor, the tail node is an a.c. ground. When the \"on\" transistor enters the triode region, the tank now sees R_on in series with C_T to ground, degrading the effective Q and partially undoing the gain. This is exactly why the classic *noise‑filtering* technique (Hegazi/Rael/Abidi) adds a **tail inductor** resonating with C_T at 2ω₀: C_T shorts the current‑source noise, while the L–C combination presents a *high* impedance at 2ω₀ so the switching pair behaves as a lossless commutator.\n- Very large C_T lowers the common‑mode resonance and can push the circuit toward hard switching/triode operation and start‑up or amplitude issues, so there is an optimum value.\n\n**Bottom line:** adding C_T lowers phase noise by bypassing the tail current source's high‑frequency (≈2ω₀) noise and sharpening the switching; it does not help the tail's 1/f noise and must be large enough (C_T ≫ g_m/2ω₀) yet used carefully to avoid loading the tank.",
        "format": "markdown",
        "sha256": "a23a78ab8d9248cf445884b5d7bc00a1f54b76b2cb4f6ed5921b7eca9906b299"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer mentions an optimum and possible high-CT penalties, but its main conclusion is that CT generally improves phase noise by filtering tail-source noise. It misses the class-C mechanism in which peak tank currents exceed ISS and does not identify small-CT flicker-noise upconversion in M1/M2.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3854,
        "output_tokens": 4366,
        "total_tokens": 8220,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3854,
        "output_tokens": 4366,
        "total_tokens": 8220,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nThe phase noise **improves (drops)** – C_T acts as a low‑pass filter / AC short at the tail node and keeps the current‑source noise (and the \"both‑devices‑on\" noise) out of the tank.\n\n## Why\n\n**1. It kills the 2ω₀ noise of I_SS (the dominant 1/f² contributor).**\n\nThe cross‑coupled pair commutates at ω₀, so it behaves as a mixer for anything injected at node P. Tail‑noise components at **2ω₀ ± Δω** are translated to **ω₀ ± Δω** and appear directly as phase‑noise sidebands (the DC and ω₀ components mostly produce AM, which the limiting action suppresses).\n\nWith C_T present, the noise current of the tail source splits between C_T and the impedance looking into the sources of M₁–M₂ (≈ 1/g_m … 1/2g_m):\n\n$$\\frac{i_{n,\\text{tank}}}{i_{n,ISS}}\\;\\approx\\;\\frac{1/(2\\omega_0 C_T)}{1/g_m}=\\frac{g_m}{2\\omega_0C_T}\\ \\ll 1$$\n\nSo design for $\\dfrac{1}{2\\omega_0 C_T}\\ll \\dfrac{1}{g_m}$ and the 2ω₀ noise is shunted to ground instead of being up/down‑converted. Several dB of improvement is typical.\n\n**2. It makes the switching sharper and more symmetric.**\n\nWithout C_T, node P bounces at 2ω₀ and the pair switches \"softly,\" so both transistors conduct for a long fraction of the cycle (more channel noise injected, tank loaded by the devices). With a large C_T, P is held at an almost constant potential, the pair switches abruptly, the two devices are simultaneously on for a shorter time, and the drain currents look more like square waves. The resulting better waveform symmetry lowers the DC value of the effective ISF, which **reduces flicker‑noise up‑conversion (the 1/f³ corner)** as well.\n\n**3. It keeps the tail transistor happy.** The 2ω₀ ripple at P is absorbed by C_T rather than pushing the current source in and out of triode (where its noise and its output conductance get worse).\n\n## Caveats (why you can't just make C_T huge)\n\n- C_T does **nothing** for the *low‑frequency* (flicker) noise of I_SS, which still modulates the amplitude and is converted to phase noise through the varactor (AM→PM).\n- Once P is a good AC ground, a device entering **triode** at the swing peaks connects the tank node to ground through R_on, loading the tank and degrading Q — partly undoing the gain. Hence the usual remedy: add a tail inductor that resonates with the parasitic capacitance at P at 2ω₀ (Hegazi's \"noise‑filtering\" technique), giving a *high* impedance at 2ω₀ seen by the pair while C_T shorts the current source's high‑frequency noise.\n- A big C_T together with the common‑mode inductance (L₁∥L₂ path) creates a common‑mode resonance; if it lands near ω₀ or 2ω₀ it can cause common‑mode oscillation/squegging. It also costs area and slows bias settling.\n\n**Bottom line:** adding C_T lowers the phase noise — mainly by filtering the tail current source's noise at 2ω₀ and by sharpening/symmetrizing the switching — provided the devices are kept out of deep triode and the common‑mode resonance is placed safely.",
        "format": "markdown",
        "sha256": "ce499b8bc081a2a86cc516679994cf8be5662559a6a7e397ad8fd6a9dc46491c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that adding CT improves phase noise through tail-noise filtering and sharper switching, contrary to the required nonmonotonic result. Its caveats do not establish the class-C improvement and competing degradation mechanisms that determine the trend; it also incorrectly claims CT reduces flicker-noise upconversion.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3854,
        "output_tokens": 4460,
        "total_tokens": 8314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3266,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3854,
        "output_tokens": 4460,
        "total_tokens": 8314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3266,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nThe tail capacitor mainly attacks **one** noise mechanism – the up/down‑conversion of the tail current source's noise – and in that respect it **lowers** the phase noise. But because it also makes node *P* a (broadband) ac ground, it can **degrade the tank Q** during the intervals when the switching devices are in triode. That is why in practice $C_T$ is used together with a tail inductor (\"noise filtering\").\n\n## Why it helps\n\nNode *P* is a common‑mode node, so the noise of $I_{SS}$ appears there as a common‑mode current. The differential pair commutates at $\\omega_0$, i.e. it acts as a mixer with LO harmonics at dc, $\\omega_0$, $2\\omega_0,\\dots$ Consequently the tail noise components around\n\n- $2\\omega_0$ (thermal noise) → translated to $\\omega_0\\pm\\Delta\\omega$ → **phase noise** ($1/f^2$ region)\n- dc / low frequency (flicker noise) → amplitude modulation → AM/PM (varactor) → close‑in noise\n\nare the troublesome ones. Putting a large capacitor from *P* to ground gives a low shunt impedance at high frequency, so the $2\\omega_0$ noise current of $I_{SS}$ is dumped to ground instead of flowing into the sources of $M_1,M_2$:\n\n$$\\frac{1}{2\\omega_0 C_T}\\ \\ll\\ \\frac{1}{g_{m1,2}}\\quad(\\text{impedance looking into the sources})$$\n\nWith $C_T$ satisfying this, the tail‑noise contribution to $\\mathcal L(\\Delta\\omega)$ drops substantially (several dB in typical designs). $C_T$ also smooths the tail current, reducing the amplitude modulation produced by the current source and hence some AM‑to‑PM conversion.\n\nNote also that $C_T$ does **not** change the oscillation frequency (for the differential mode *P* is already a virtual ground), and it does **not** remove the *low‑frequency* (1/f) noise of $I_{SS}$, since the capacitor is an open circuit there.\n\n## Why it can hurt\n\nMaking *P* an ac ground at **all** frequencies means that when a transistor is pushed into the triode region near the peaks of the swing, the tank at X (or Y) sees a path\n$$\\text{tank} \\;\\to\\; r_{on}\\;\\to\\; C_T \\;\\to\\; \\text{gnd},$$\ni.e. the common‑mode (≈ $2\\omega_0$) current drawn by the triode device is absorbed by $C_T$. This resistive loading lowers the tank Q and raises phase noise, partially (or completely) cancelling the benefit. The same low impedance can also help excite common‑mode behaviour with the common‑mode inductance of $L_1\\|L_2$.\n\n## The proper solution (Hegazi–Sjöland–Abidi filtering)\n\nInsert an inductor $L_T$ in series with the tail so that $L_T$ resonates with $C_T$ (plus the current‑source parasitics) at $2\\omega_0$:\n\n- $C_T$ still shorts the current‑source noise at $2\\omega_0$ to ground;\n- the $LC$ combination presents a **high impedance at $2\\omega_0$ looking into the tail from the pair**, so the triode devices no longer load the tank.\n\nThis \"tail resonance\" gives the noise suppression without the Q penalty, and typically improves phase noise by ~5–8 dB over the plain current‑biased topology.",
        "format": "markdown",
        "sha256": "420126739283d0839edbeecfa4605df0c5517439c5576a74ad4fbca09588b25b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It identifies competing tail-noise filtering and a triode-related tank-Q penalty, capturing a real tradeoff. However, it misses the class-C improvement from peak tank currents exceeding ISS and the other key degradations, while overstating tail-noise shunting as the main benefit.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3854,
        "output_tokens": 7853,
        "total_tokens": 11707,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3854,
        "output_tokens": 7853,
        "total_tokens": 11707,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Recognizing the topology\n\nThe figure is a **parallel‑coupled quadrature LC oscillator (QVCO)**:\n\n* Tank 1 (nodes X₁, Y₁) and tank 2 (nodes X₂, Y₂) are identical: inductor $L$ to $V_{DD}$ and total capacitance $C$ at each node.\n* In each tank the **inner** pair (bias $I_{SS}$, transconductance $g_m$) is cross‑coupled to its *own* tank → it supplies the negative resistance.\n* The **outer** pair (bias $I_1$, transconductance $g_{mc}$) is driven by the *other* tank, one of the two couplings being inverted. This forces\n\n$$V_2 = \\pm j\\,V_1 \\qquad (\\text{90° phase difference}).$$\n\n## Why the frequency is *not* exactly $1/\\sqrt{LC}$\n\nBecause the coupling devices are driven by the *other* tank, the current they inject into a node is **90° out of phase with that node's own voltage**. The core pair injects an in‑phase current $g_mV_1$, so the total injected current is\n\n$$I_{tot}=(g_m \\mp j g_{mc})V_1 .$$\n\nFor oscillation the tank impedance must be $Z_T = 1/(g_m\\mp jg_{mc})$, i.e. it must exhibit a **non‑zero phase** — the tanks are forced to run off resonance.\n\n## Analysis\n\nWriting KCL at a node (differential mode, $V_{Y1}=-V_{X1}$, $V_{X2}=\\pm jV_{X1}$):\n\n$$\\Big(j\\omega C+\\frac{1}{j\\omega L}+\\frac{1}{R_p}-g_m\\Big)V_1 \\pm j\\,g_{mc}V_1=0$$\n\n* Real part: $g_m = 1/R_p$ (ordinary start‑up condition, set by $I_{SS}$).\n* Imaginary part: \n\n$$\\boxed{\\;\\omega C-\\frac{1}{\\omega L}=\\pm g_{mc}\\;}$$\n\nHence\n\n$$\\omega_{osc}=\\sqrt{\\omega_0^{2}+\\Big(\\frac{g_{mc}}{2C}\\Big)^{2}}\\;\\pm\\;\\frac{g_{mc}}{2C},\n\\qquad \\omega_0=\\frac{1}{\\sqrt{LC}}$$\n\n## Practical estimate\n\nFor weak coupling ($g_{mc}\\ll \\omega_0C$):\n\n$$\\omega_{osc}\\simeq\\omega_0\\left(1\\pm\\frac{g_{mc}}{2\\omega_0C}\\right)=\\omega_0\\left(1\\pm\\frac{1}{2Q}\\frac{g_{mc}}{g_{m}}\\right),\\qquad Q=\\omega_0 C R_p$$\n\nand, for equal device sizes, $g_{mc}/g_m=\\sqrt{I_1/I_{SS}}$:\n\n$$\\omega_{osc}\\approx\\frac{1}{\\sqrt{LC_{tot}}}\\left[1\\pm\\frac{1}{2Q}\\sqrt{\\frac{I_1}{I_{SS}}}\\right]$$\n\nwhere $C_{tot}$ at each node = $C_{DB}+C_{GD}$ of the core and coupling devices **+** $C_{GS}$ of the core device of the same tank **+** $C_{GS}$ of the coupling device it drives in the other tank **+** inductor parasitics.\n\n**Remarks**\n\n* To first order the circuit simply oscillates at the tank resonance, $\\omega_{osc}\\approx 1/\\sqrt{LC_{tot}}$; e.g. with $Q\\approx 8$ and $I_1=0.25I_{SS}$ the deviation is only ≈3 %.\n* The $\\pm$ sign shows the two possible modes ($V_2=+jV_1$ or $-jV_1$), i.e. the well‑known bimodal/ambiguous‑phase behaviour of parallel‑coupled QVCOs; the mode with the lower tank loss prevails.\n* Note the trade‑off: larger $I_1$ (stronger coupling) → better quadrature accuracy but larger frequency offset and worse phase noise.",
        "format": "markdown",
        "sha256": "9785b65a05951a3b5debda96c329c0e6a37b6aae9df9a397c5ec68a9f940ff2f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the tank resonance and the required small-signal coupling shift, Δω ≈ (gmc/gm)ω0/(2Q), and recognizes the two possible shift directions. Its gmc/(2C) expression is accompanied by the edge-of-oscillation condition gmRp = 1, as allowed by the golden solution.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2007,
        "output_tokens": 8919,
        "total_tokens": 10926,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7475,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2007,
        "output_tokens": 8919,
        "total_tokens": 10926,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7475,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the circuit\n\nThe figure is **not** two independent oscillators – it is one *parallel‑coupled quadrature LC oscillator* (QVCO):\n\n* **Inner pair (tail = I_SS):** the ordinary cross‑coupled pair that provides the −1/g_m needed to cancel the tank loss of each LC tank (X₁Y₁ and X₂Y₂).\n* **Outer pair (tail = I₁):** \"coupling\" transistors. Their gates are driven by the *other* tank (X₁,Y₁ → bottom pair straight; X₂,Y₂ → top pair crossed).\n\nBecause one coupling path is inverted and the other is not, the loop contains a net 180° inversion, which forces the two tanks to run with a 90° phase difference (quadrature).\n\n## First‑order estimate: the tank resonance\n\nEach node (e.g. X₁) is now loaded by **two** transistors instead of one:\n\n$$C_{tot}\\;\\approx\\;\\underbrace{(C_{GS}+C_{DB}+2C_{GD})_{core}}_{\\text{cross-coupled device}}+\\underbrace{(C_{GS}+C_{DB}+C_{GD})_{coup}}_{\\text{coupling device}}+C_{L}$$\n\nso\n\n$$\\boxed{\\;\\omega_{osc}\\approx\\omega_0=\\frac{1}{\\sqrt{L\\,C_{tot}}}\\;}$$\n\ni.e. roughly a factor $\\sqrt2$ **below** the frequency the same core would reach without the coupling devices (if the coupling transistors are as wide as the core devices).\n\n## Second‑order effect: the tanks must run *off* resonance\n\nWith $V_2/V_1=\\pm j$, each tank must satisfy\n\n$$V_1=Z(j\\omega)\\big[g_{m}V_1+g_{mc}V_2\\big]\\;\\Rightarrow\\;Y_{tank}(j\\omega)=g_m\\pm jg_{mc}$$\n\nSeparating real and imaginary parts:\n\n$$\\frac1R=g_m \\qquad\\text{and}\\qquad \\omega C_{tot}-\\frac{1}{\\omega L}=\\pm g_{mc}$$\n\nThe second condition cannot be met at $\\omega_0$ – the tank must provide a small phase shift, so\n\n$$\\omega_{osc}= \\omega_0\\left[\\sqrt{1+\\alpha^{2}}\\;\\pm\\;\\alpha\\right],\\qquad \n\\alpha=\\frac{g_{mc}}{2\\omega_0C_{tot}}=\\frac{1}{2Q}\\frac{g_{mc}}{g_{m}}\\simeq\\frac{1}{2Q}\\sqrt{\\frac{I_1}{I_{SS}}}$$\n\n$$\\boxed{\\;f_{osc}\\approx f_0\\left[1\\pm\\frac{1}{2Q}\\sqrt{\\frac{I_1}{I_{SS}}}\\right],\\qquad f_0=\\frac{1}{2\\pi\\sqrt{LC_{tot}}}\\;}$$\n\n## Numerical feel\n\nFor $L=1$ nH, $C_{tot}=1$ pF → $f_0\\approx5$ GHz, $Q\\approx5$, and $I_1=I_{SS}$ (equal‑size coupling devices):\n\n$$f_{osc}\\approx5\\ \\text{GHz}\\times(1\\pm0.1)\\;\\Rightarrow\\;\\approx4.5\\ \\text{or}\\ 5.5\\ \\text{GHz}$$\n\n**Summary:** the circuit oscillates essentially at the tank resonance $1/(2\\pi\\sqrt{LC_{tot}})$ — with $C_{tot}$ including the capacitance of *both* the core and the coupling transistors — detuned by about $\\pm(1/2Q)(g_{mc}/g_m)$. Note that either of the two modes (lead or lag) can start up, which is the well‑known phase‑ambiguity/phase‑noise penalty of this QVCO; weak coupling (small $I_1$) keeps the detuning and the phase‑noise degradation small.",
        "format": "markdown",
        "sha256": "4998f2078f3a0ec5de8d7be35fb15c42666e87d29045ec96a8b18ca3a0b11244"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It starts from the loaded tank resonance and gives the correct coupling-induced shift, including the small-signal form proportional to (gmc/gm)/(2Q) and either shift direction. The current-ratio substitution and detailed capacitance estimate are model-dependent approximations, not errors in the central frequency estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2007,
        "output_tokens": 8906,
        "total_tokens": 10913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7514,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2007,
        "output_tokens": 8906,
        "total_tokens": 10913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7514,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Recognizing the circuit\n\nThis is a **quadrature (coupled) LC oscillator**. Each half is an ordinary cross‑coupled LC VCO (tail current $I_{SS}$), and the two *outer* transistors of each half form a **coupling pair** (tail current $I_1$) whose gates are driven by the *other* oscillator's outputs. The cross‑over in the coupling path forces the two tanks into a 90° phase relationship:\n\n$$V_{X2Y2}=\\mp j\\,V_{X1Y1}$$\n\nThe key point is that **the circuit does not oscillate at the tank resonance frequency.**\n\n## Why the frequency is pushed off resonance\n\nEach tank is driven by two currents:\n\n* from its own core pair: $g_{m1}V_1$ — **in phase** with that tank's voltage,\n* from the coupling pair: $g_{m2}V_2$ — **in quadrature** with it.\n\nTheir sum is a current of magnitude $\\sqrt{g_{m1}^2+g_{m2}^2}\\,V_1$ that makes an angle\n\n$$\\theta=\\tan^{-1}\\frac{g_{m2}}{g_{m1}}$$\n\nwith the tank voltage. Since the loop phase must total zero, **the tank itself must contribute $-\\theta$**, which a resonator can only do *away from resonance*.\n\nFormally, with $V_2=-jV_1$ the oscillation condition $V_1=Z(j\\omega)\\,[\\,g_{m1}V_1+g_{m2}V_2]$ gives\n\n$$Y(j\\omega)=\\frac{1}{R_p}+j\\!\\left(\\omega C-\\frac{1}{\\omega L}\\right)=g_{m1}-jg_{m2}$$\n\nso that\n\n$$\\boxed{g_{m1}=\\frac{1}{R_p}}\\qquad\\text{(amplitude)},\\qquad \n\\omega C-\\frac{1}{\\omega L}=-g_{m2}\\quad\\text{(frequency)} $$\n\n## Result\n\nSolving the quadratic, with $\\omega_0=1/\\sqrt{LC}$, $Q=R_p\\omega_0C$ and the **coupling factor** $\\alpha\\equiv g_{m2}/g_{m1}=g_{m2}R_p$:\n\n$$\\omega_{\\rm osc}=\\omega_0\\left[\\sqrt{1+\\Big(\\frac{\\alpha}{2Q}\\Big)^{2}}\\;\\mp\\;\\frac{\\alpha}{2Q}\\right]\\;\\simeq\\;\\omega_0\\left(1\\mp\\frac{\\alpha}{2Q}\\right)$$\n\n(equivalently $\\Delta\\omega/\\omega_0\\approx-\\theta/2Q$, using the tank's phase slope $\\angle Z\\approx-2Q\\,\\Delta\\omega/\\omega_0$).\n\nFor square‑law devices (core carries $I_{SS}/2$, coupling devices $I_1/2$):\n\n$$\\alpha=\\sqrt{\\frac{(W/L)_2\\,I_1}{(W/L)_1\\,I_{SS}}}$$\n\nso, for identical device sizes,\n\n$$\\omega_{\\rm osc}\\approx\\frac{1}{\\sqrt{LC}}\\left(1\\mp\\frac{1}{2Q}\\sqrt{\\frac{I_1}{I_{SS}}}\\right)$$\n\nwhere $C$ is the total single‑ended node capacitance (drain caps of core + coupling devices, gate caps of the core device and of the coupling device it drives, plus varactor/wiring), and $L$ is one branch inductor ($2L$ differential with $C/2$ ⇒ still $1/\\sqrt{LC}$).\n\n**Numerical feel:** $Q=8$, $I_1=I_{SS}$ ($\\alpha=1$) ⇒ $\\omega_{\\rm osc}\\approx 0.94\\,\\omega_0$ (a ~6 % shift). With $I_1=0.1\\,I_{SS}$ ($\\alpha\\approx0.32$) the shift is only ~2 %.\n\n## Remarks\n\n* Both signs are valid solutions (the \"bimodal\" ambiguity of this parallel‑coupled QVCO); which mode starts depends on mismatch/initial conditions, and the two modes sit symmetrically about $\\omega_0$.\n* Because the tanks run off resonance, the effective phase slope (and hence the noise‑shaping) is degraded — this is the well‑known phase‑noise/quadrature‑accuracy trade‑off set by $I_1/I_{SS}$: small $I_1$ ⇒ frequency ≈ $1/\\sqrt{LC}$ and good phase noise, but poor quadrature accuracy.",
        "format": "markdown",
        "sha256": "8584715f4681cbb38f78d8704ef51a2db1f5a70451a15c609d2b3ea3a96159a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly starts from the tank resonance and derives the coupling-induced shift \u001b[0m\u001b[0mΔω≈αω0/(2Q), with α=gm2/gm1, including the two possible frequency directions. Its small-signal square-law mapping is a valid estimate; minor higher-order or large-signal qualifications do not undermine the requested result.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2007,
        "output_tokens": 8469,
        "total_tokens": 10476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6875,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2007,
        "output_tokens": 8469,
        "total_tokens": 10476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6875,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    }
  ]
}
