{
  "model_key": "claude_opus_55",
  "display_name": "Claude Opus 5.5",
  "provider": "anthropic",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "Claude Opus 5.5 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (anthropic/claude-opus-5.5) at maximum reasoning effort. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Claude Opus 5.5 on 2026-11-10 ($4.00 input, $0.20 cached input, $20.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 143,
          "incorrect_count": 7,
          "partial_credit_count": 7,
          "zero_count": 0,
          "mean_score_0_to_4": 3.9066666666666667,
          "score_percent": 97.66666666666667,
          "score_distribution": {
            "1": 2,
            "2": 3,
            "3": 2,
            "4": 143
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 143,
          "incorrect_count": 7,
          "partial_credit_count": 7,
          "zero_count": 0,
          "mean_score_0_to_4": 3.9066666666666667,
          "score_percent": 97.66666666666667,
          "score_distribution": {
            "1": 2,
            "2": 3,
            "3": 2,
            "4": 143
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 90,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 90
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 90,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 90
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 53,
          "incorrect_count": 7,
          "partial_credit_count": 7,
          "zero_count": 0,
          "mean_score_0_to_4": 3.7666666666666666,
          "score_percent": 94.16666666666667,
          "score_distribution": {
            "1": 2,
            "2": 3,
            "3": 2,
            "4": 53
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 53,
          "incorrect_count": 7,
          "partial_credit_count": 7,
          "zero_count": 0,
          "mean_score_0_to_4": 3.7666666666666666,
          "score_percent": 94.16666666666667,
          "score_distribution": {
            "1": 2,
            "2": 3,
            "3": 2,
            "4": 53
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 47,
        "incorrect_count": 3,
        "partial_credit_count": 3,
        "zero_count": 0,
        "mean_score_0_to_4": 3.88,
        "score_percent": 97.0,
        "score_distribution": {
          "1": 1,
          "2": 1,
          "3": 1,
          "4": 47
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 47,
        "incorrect_count": 3,
        "partial_credit_count": 3,
        "zero_count": 0,
        "mean_score_0_to_4": 3.9,
        "score_percent": 97.5,
        "score_distribution": {
          "2": 2,
          "3": 1,
          "4": 47
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 49,
        "incorrect_count": 1,
        "partial_credit_count": 1,
        "zero_count": 0,
        "mean_score_0_to_4": 3.94,
        "score_percent": 98.5,
        "score_distribution": {
          "1": 1,
          "4": 49
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 0,
        "input_tokens": 293850,
        "output_tokens": 3354562,
        "total_tokens": 3648412
      },
      "known_totals": {
        "cached_input_tokens": 0,
        "input_tokens": 293850,
        "output_tokens": 3354562,
        "total_tokens": 3648412
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 30,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 30
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 30,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 30
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 30,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 30
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 17,
          "incorrect_count": 3,
          "partial_credit_count": 3,
          "zero_count": 0,
          "mean_score_0_to_4": 3.7,
          "score_percent": 92.5,
          "score_distribution": {
            "1": 1,
            "2": 1,
            "3": 1,
            "4": 17
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 17,
          "incorrect_count": 3,
          "partial_credit_count": 3,
          "zero_count": 0,
          "mean_score_0_to_4": 3.75,
          "score_percent": 93.75,
          "score_distribution": {
            "2": 2,
            "3": 1,
            "4": 17
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 19,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.85,
          "score_percent": 96.25,
          "score_distribution": {
            "1": 1,
            "4": 19
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# The intrinsic gain roughly doubles\n\n## Derivation (square-law model)\n\nThe intrinsic gain is $A_0 = g_m r_o$.\n\n**Transconductance:**\n$$g_m = \\sqrt{2\\mu_n C_{ox}\\frac{W}{L}I_D}$$\n\n**Output resistance:**\n$$r_o \\approx \\frac{1}{\\lambda I_D}, \\qquad \\lambda \\propto \\frac{1}{L}$$\n\nCombining them:\n$$A_0 = g_m r_o = \\frac{2}{\\lambda V_{ov}} \\;\\propto\\; \\sqrt{\\frac{WL}{I_D}}$$\n\n## Doubling both W and L\n\n| Quantity | Change | Reason |\n|---|---|---|\n| W/L | unchanged | both doubled |\n| g_m (same I_D) | unchanged | depends on W/L |\n| V_ov | unchanged | same W/L and I_D |\n| λ | halved | λ ∝ 1/L |\n| r_o | doubled | r_o = 1/(λI_D) |\n| **A₀ = g_m r_o** | **doubled** | |\n\nEquivalently, from $A_0 \\propto \\sqrt{WL/I_D}$, multiplying WL by 4 at fixed current gives √4 = 2.\n\n## The price paid\n\n- **Area:** WL increases by 4×.\n- **Gate capacitance:** C_gs ∝ WL increases by about 4×. Junction capacitances, which scale with W, increase by about 2×.\n- **Speed:** $f_T \\approx g_m/(2\\pi C_{gs}) \\propto \\mu V_{ov}/L^2$, so f_T drops by about 4×.\n\n## Side benefits\n\n- **Matching:** σ(ΔV_TH) ∝ 1/√(WL), so mismatch is halved.\n- **Flicker noise:** 1/f noise ∝ 1/(WLC_ox), so it is reduced.\n\n## Caveat\n\nThis is a first-order (long-channel) result. In short-channel devices, r_o does not scale exactly linearly with L, because DIBL, velocity saturation, and other effects alter the dependence. So the actual improvement may differ somewhat from exactly 2×. The qualitative conclusion still holds: a longer channel at the same W/L gives higher intrinsic gain at the expense of speed and area.",
        "format": "markdown",
        "sha256": "12b403a17449ad169357312158c14f7666c1ee322fa6b7156b074311d971d55d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with W/L and overdrive unchanged, gm and drain current stay about constant while the longer channel reduces λ and doubles ro. The extra scaling and caveats do not undermine the answer.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 2864,
        "total_tokens": 2900,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2068,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 2864,
        "total_tokens": 2900,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2068,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# The intrinsic gain roughly doubles (+6 dB)\n\nThe intrinsic gain is\n\n$$A_0 = g_m r_o$$\n\n**Transconductance (unchanged)**\n\n$$g_m = \\sqrt{2\\mu_n C_{ox}\\frac{W}{L}I_D} = \\frac{2I_D}{V_{ov}}$$\n\nW/L is unchanged, so at the same bias current (or the same V_GS) the overdrive voltage and g_m stay the same.\n\n**Output resistance (doubles)**\n\n$$r_o = \\frac{1}{\\lambda I_D}, \\qquad \\lambda \\propto \\frac{1}{L}$$\n\nChannel-length modulation matters less in a longer channel, because the pinch-off shortening ΔL is a smaller fraction of L. Doubling L halves λ, so r_o doubles.\n\n**Result**\n\n$$A_0 = g_m r_o \\;\\rightarrow\\; 2A_0$$\n\nThe same result can be written two other ways:\n\n- $A_0 = \\dfrac{2V_A}{V_{ov}}$, where the Early voltage $V_A \\propto L$ doubles while $V_{ov}$ is unchanged.\n- At constant current, $A_0 \\propto \\sqrt{\\dfrac{WL}{I_D}}$. WL increases 4×, and √4 = 2.\n\n**The trade-off: speed**\n\nThe gate area WL is 4× larger, so $C_{gs} \\approx \\tfrac{2}{3}WLC_{ox}$ is also 4× larger, while g_m is unchanged. The transit frequency therefore drops by about 4×:\n\n$$f_T \\approx \\frac{g_m}{2\\pi C_{gs}} \\propto \\frac{\\mu V_{ov}}{L^2}$$\n\nYou gain intrinsic gain at the cost of bandwidth and area.\n\n**Caveat:** This is the first-order long-channel result. In short-channel devices, r_o does not scale exactly linearly with L, because of effects like DIBL and velocity saturation. The actual improvement can therefore differ somewhat from exactly 2×.",
        "format": "markdown",
        "sha256": "01541d090b6fbd51d120f2127a3b4dab4c4e99271b9a56f7e602a91437864cc4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with W/L and overdrive unchanged, gm stays roughly constant while the longer channel approximately doubles ro. The additional speed trade-off and short-channel caveat are consistent with the first-order result.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 3418,
        "total_tokens": 3454,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2712,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 3418,
        "total_tokens": 3454,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2712,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# The intrinsic gain roughly doubles\n\nThis assumes the same bias current (or, equivalently here, the same overdrive voltage).\n\n## Why\n\nThe intrinsic gain is\n\n$$A_0 = g_m r_o$$\n\nUsing the square-law model:\n\n- **Transconductance:** $g_m = \\sqrt{2\\mu_n C_{ox}\\dfrac{W}{L} I_D}$. Doubling both W and L leaves W/L unchanged, so at the same $I_D$, **$g_m$ stays the same**. The overdrive voltage $V_{ov}$ is also unchanged.\n- **Output resistance:** $r_o \\approx \\dfrac{1}{\\lambda I_D}$. Since the channel-length modulation coefficient scales as $\\lambda \\propto 1/L$, doubling L halves λ, so **$r_o$ doubles**.\n\nCombining these with $\\lambda \\propto 1/L$:\n\n$$A_0 = g_m r_o \\propto \\sqrt{\\frac{W L}{I_D}}$$\n\nDoubling W and L multiplies WL by 4, so $A_0$ increases by $\\sqrt{4} = 2$.\n\nThe same result follows from $A_0 = \\dfrac{2}{\\lambda V_{ov}}$: $V_{ov}$ is unchanged and λ is halved.\n\n## Trade-offs\n\n| Parameter | Change |\n|---|---|\n| Intrinsic gain $g_m r_o$ | ×2 |\n| $g_m$ | unchanged |\n| $r_o$ | ×2 |\n| Gate area and $C_{gs}$ (∝ WL) | ×4 |\n| Transit frequency $f_T \\approx g_m/(2\\pi C_{gs})$ | ÷4 (slower) |\n| Mismatch (∝ 1/√WL) | ÷2 (better) |\n| Flicker noise (∝ 1/WL) | ÷4 (better) |\n\nIn real short-channel devices, $r_o$ doesn't scale exactly linearly with L because of effects like DIBL and velocity saturation. So the improvement is approximately, not exactly, 2×.",
        "format": "markdown",
        "sha256": "f70e4681e9be2a17c2848a2c004ff3fb4f55cb55ccedec66c92029453849cba5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions leaves W/L, drain current, and gm approximately unchanged at the stated bias, while the longer channel roughly doubles ro and intrinsic gain. The assumptions and approximate nature of the scaling are stated appropriately.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 2570,
        "total_tokens": 2606,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 2570,
        "total_tokens": 2606,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Both are correct. It depends on what you hold constant.\n\nIn saturation, the square-law model gives\n\n$$I_D = \\tfrac{1}{2}\\mu_n C_{ox}\\frac{W}{L}V_{ov}^2$$\n\nDifferentiating with respect to $V_{GS}$ gives a transconductance that can be written three equivalent ways:\n\n$$g_m = \\mu_n C_{ox}\\frac{W}{L}V_{ov} \\;=\\; \\sqrt{2\\mu_n C_{ox}\\frac{W}{L}I_D} \\;=\\; \\frac{2I_D}{V_{ov}}$$\n\nThe first form says $g_m$ rises with $V_{ov}$, and the last says it falls. The contradiction disappears once you notice that $W/L$, $I_D$, and $V_{ov}$ aren't independent. The square law ties them together, so you can only choose two of them, and the trend depends on which one you hold fixed while changing $V_{ov}$.\n\n**Student A: fixed device size ($W/L$)**\nTake a given transistor and raise $V_{GS}$. Both $V_{ov}$ and $I_D$ increase, with $I_D \\propto V_{ov}^2$. Then $g_m = \\mu_n C_{ox}(W/L)V_{ov}$ increases linearly with $V_{ov}$. The $2I_D/V_{ov}$ form agrees, because its numerator grows faster than its denominator.\n\n**Student B: fixed bias current ($I_D$)**\nIf the current is set by a current source or power budget, the only way to raise $V_{ov}$ is to shrink $W/L$ (with $W/L \\propto 1/V_{ov}^2$). Then $g_m = 2I_D/V_{ov}$ decreases as $1/V_{ov}$.\n\n**The underlying idea**\nThe transconductance efficiency $g_m/I_D = 2/V_{ov}$ always falls with overdrive. This creates a design trade-off:\n- **Low $V_{ov}$** gives more $g_m$ per unit of current, but needs larger devices with more capacitance.\n- **High $V_{ov}$** gives smaller, faster devices (higher $f_T$), but less $g_m$ per unit of current.\n\nThis trade-off is the basis of the $g_m/I_D$ design methodology.\n\n**Real-device caveats**\n- **Large $V_{ov}$, fixed $W/L$:** velocity saturation and mobility degradation make $g_m$ level off (toward roughly $WC_{ox}v_{sat}$) instead of growing linearly.\n- **Small $V_{ov}$:** the device enters moderate or weak inversion. There, $g_m/I_D$ doesn't grow without bound as $2/V_{ov}$ would suggest. It saturates near $1/(nV_T)$, about 25–30 V⁻¹ at room temperature.",
        "format": "markdown",
        "sha256": "4ada032c48224d1b60564dcfc49225fb6fff32987f8f209edbc25c54d3d9b14e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size: increasing overdrive raises current quadratically and gm linearly. It also correctly explains that Student B’s decreasing-gm result applies when current is held fixed and W/L is reduced.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 54,
        "output_tokens": 5414,
        "total_tokens": 5468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4444,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 54,
        "output_tokens": 5414,
        "total_tokens": 5468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4444,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Both can be correct. It depends on what is held constant.\n\nFor a MOSFET in saturation (square-law model), I_D = ½ μC_ox (W/L) V_OV², and the transconductance can be written three equivalent ways:\n\n1. **g_m = μC_ox (W/L) · V_OV**\n2. **g_m = 2I_D / V_OV**\n3. **g_m = √(2μC_ox (W/L) · I_D)**\n\n**Student A is right if the transistor size (W/L) is fixed.** For a given device, raising V_OV increases g_m linearly (form 1). The cost is current, which rises as V_OV².\n\n**Student B is right if the bias current (I_D) is fixed**, for example when it is set by a current source. The only way to raise V_OV at constant current is to shrink W/L, and then g_m = 2I_D/V_OV falls (form 2).\n\nForm 3 shows that if both W/L and I_D are fixed, V_OV is fully determined and cannot be varied.\n\n### Numerical example\n\n| Case | V_OV = 0.2 V | V_OV = 0.4 V |\n|---|---|---|\n| Fixed μC_ox(W/L) = 4 mA/V² | I_D = 80 µA, g_m = 0.8 mS | I_D = 320 µA, g_m = **1.6 mS** ↑ |\n| Fixed I_D = 100 µA | W/L must be large, g_m = 1.0 mS | W/L shrinks 4×, g_m = **0.5 mS** ↓ |\n\n### What always decreases\n\nThe transconductance efficiency, **g_m/I_D = 2/V_OV**, always falls as V_OV rises. This is the transconductance you get per unit of bias current. It explains a basic design tradeoff:\n\n* **Low-power designs** use small overdrive, which gives more g_m per µA but requires larger devices.\n* **High-speed designs** use larger overdrive, which gives smaller, faster devices (f_T ∝ μV_OV/L²).\n\n### Real-device caveats\n\n* **At large V_OV:** velocity saturation and mobility degradation make g_m level off toward roughly W·C_ox·v_sat, even at fixed W/L. Student A's trend doesn't continue indefinitely.\n* **At very small V_OV:** the square law breaks down. g_m/I_D doesn't go to infinity; in weak inversion it levels off at about 1/(n·kT/q), roughly 25–30 V⁻¹.\n\n**Bottom line:** A is correct for a fixed device, and B is correct for a fixed bias current. A complete answer has to state which one is held constant.",
        "format": "markdown",
        "sha256": "9539a57c999c66adbe27424bac3cf9f3db371a5e43357682131751e23e0ed3a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed W/L and explains that increasing overdrive raises current quadratically and gm linearly. It also correctly states the fixed-current condition under which Student B is right.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 54,
        "output_tokens": 4347,
        "total_tokens": 4401,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3470,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 54,
        "output_tokens": 4347,
        "total_tokens": 4401,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3470,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Both are correct. It depends on what you hold constant.\n\nFor a MOSFET in saturation (square-law model), $I_D = \\tfrac{1}{2}\\mu_n C_{ox}\\tfrac{W}{L}V_{ov}^2$, and the transconductance can be written three equivalent ways:\n\n$$g_m = \\mu_n C_{ox}\\frac{W}{L}V_{ov} \\;=\\; \\sqrt{2\\mu_n C_{ox}\\frac{W}{L}I_D} \\;=\\; \\frac{2I_D}{V_{ov}}$$\n\nBecause $g_m$, $V_{ov}$, $I_D$, and $W/L$ are all linked, \"how does $g_m$ change with $V_{ov}$?\" has no single answer until you say what else stays fixed.\n\n**Student A is right if the device size (W/L) is fixed.**\nFrom $g_m = \\mu_n C_{ox}(W/L)V_{ov}$, $g_m$ rises linearly with $V_{ov}$. Turning up the gate voltage on a given transistor increases the inversion charge, so both $I_D$ (∝ $V_{ov}^2$) and $g_m$ (∝ $V_{ov}$) increase.\n\n**Student B is right if the drain current (I_D) is fixed.**\nFrom $g_m = 2I_D/V_{ov}$, $g_m$ falls as $1/V_{ov}$. To get a larger overdrive at the same current, you must use a smaller W/L, and the smaller device produces less transconductance from the same current.\n\n**Intuition for B's case:** since $I_D \\propto V_{ov}^2$,\n$$\\frac{g_m}{I_D} = \\frac{d(\\ln I_D)}{dV_{GS}} = \\frac{2}{V_{ov}}$$\nThe farther above threshold you bias, the smaller the *fractional* change in current per volt of gate drive.\n\n## Why this matters in practice\n\nDesigners usually work with a fixed current (power) budget, so Student B's view is the basis of the **g_m/I_D design methodology**:\n- **Low V_ov:** more g_m per unit current (power-efficient), but the devices are large, with more capacitance and lower speed.\n- **High V_ov:** less g_m per unit current, but the devices are smaller and faster. In the square-law model, $f_T \\propto \\mu V_{ov}/L^2$.\n\n## Real-device caveats\n\n- At very low $V_{ov}$ the transistor enters weak inversion, and $g_m/I_D$ levels off at about $1/(nV_T) \\approx 25\\text{–}30\\ \\text{V}^{-1}$ instead of growing without bound.\n- In short-channel devices, velocity saturation makes $g_m$ flatten at high $V_{ov}$ even with fixed W/L, and mobility degradation can make it drop. So Student A's claim holds only up to a point.",
        "format": "markdown",
        "sha256": "4e42b1faa85e7c238b05fffcd2c7d41a38ee3ef7493a06eaddda4859e6378e64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that for fixed W/L, gm increases with Vov, while it decreases if ID is held fixed and W/L is reduced. The additional design context and device caveats do not undermine the essential answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 54,
        "output_tokens": 4890,
        "total_tokens": 4944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3919,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 54,
        "output_tokens": 4890,
        "total_tokens": 4944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3919,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Yes, the models are identical\n\nWith the terminals labeled the same way (G, D, S, B), the PMOS small-signal model is the same circuit as the NMOS model, including the directions of the dependent sources:\n\n- The gate is an open circuit at low frequency.\n- A dependent current source **g_m·v_gs** (plus **g_mb·v_bs** if body effect matters) flows **from drain to source**.\n- **r_o** sits between drain and source.\n- At high frequency, the same set of capacitances applies (C_gs, C_gd, C_sb, C_db, …).\n\nSo for both devices, with i_d as the incremental current flowing into the drain:\n\n  **i_d = g_m·v_gs + g_mb·v_bs + v_ds/r_o**\n\n## Why the signs work out\n\nA saturated PMOS carries its bias current from source to drain:\n\n  I_SD = ½ μ_p C_ox (W/L)(V_SG − |V_THp|)²(1 + λV_SD)\n\nPerturbing this gives\n\n  ΔI_SD = g_m·v_sg + v_sd/r_o,  where g_m = ∂I_SD/∂V_SG and r_o = 1/(λI_SD)\n\nThe incremental current into the drain is i_d = −ΔI_SD. Since v_sg = −v_gs and v_sd = −v_ds:\n\n  i_d = −g_m(−v_gs) − (−v_ds)/r_o = **g_m·v_gs + v_ds/r_o**\n\nReversing the current direction and reversing the voltage polarities cancel each other. The body-effect term works the same way: raising the body above the source increases |V_THp| and reduces I_SD, which gives i_d = +g_mb·v_bs.\n\n**Intuitive check:** raise the gate voltage slightly on either device.\n- In an NMOS, the drain-to-source current increases.\n- In a PMOS, V_SG shrinks, so the source-to-drain current decreases. That is the same as an increase in drain-to-source current.\n\nEither way, a positive v_gs pushes extra current from D to S.\n\n## What does differ: parameter values, not the model\n\n- **g_m** = μ_p C_ox (W/L)(V_SG − |V_THp|) = √(2μ_p C_ox (W/L)|I_D|) = 2|I_D|/V_ov, using magnitudes. Hole mobility is lower (often by roughly 2–3×), so a PMOS gives less g_m for the same W/L and current.\n- **r_o** = 1/(λ_p|I_D|), with a different λ.\n- **g_mb and the capacitances** depend on the n-well doping and the geometry. A PMOS in its own well can have its body tied to its source, which eliminates g_mb. The well also adds a well-to-substrate capacitance at the body node.\n- **The bias point** must be found with the PMOS large-signal equations and their sign conventions.\n\n## Common pitfall\n\nPMOS devices are usually drawn \"upside down,\" with the source on top at V_DD. This tempts people to flip the model, for example by drawing g_m·v_gs pointing from source to drain. That is wrong: the model is tied to the terminals, not to how the symbol is oriented on the page.\n\nDrawing g_m·v_sg pointing from source to drain is equivalent and fine. The error is flipping only one of the two (the voltage polarity or the arrow direction).\n\nBecause the model is identical, all the standard results carry over unchanged. For example, a diode-connected PMOS looks like (1/g_m)‖r_o, just like an NMOS.",
        "format": "markdown",
        "sha256": "0ec13b44c1c769ff881122c76b7a582335a484ea42aafdef0af49a3312c31e33"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer correctly states that the PMOS small-signal model has the same form as the NMOS model with consistent source-referenced voltage and current conventions. Its sign discussion and parameter caveats are consistent with that conclusion.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 10151,
        "total_tokens": 10186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8967,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 10151,
        "total_tokens": 10186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8967,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Yes, the small-signal model is the same\n\nThe PMOS and NMOS small-signal models have the same form, provided you use the same reference directions for both: small-signal drain current $i_d$ defined *into* the drain, $v_{gs} = v_g - v_s$, $v_{bs} = v_b - v_s$, and $v_{ds} = v_d - v_s$. Both models contain the same elements with the same orientation:\n\n- a controlled source $g_m v_{gs}$ from drain to source\n- a controlled source $g_{mb} v_{bs}$ from drain to source (body effect)\n- $r_o$ between drain and source\n- capacitances $C_{gs}, C_{gd}, C_{gb}, C_{sb}, C_{db}$\n\n$$i_d = g_m v_{gs} + g_{mb} v_{bs} + \\frac{v_{ds}}{r_o}$$\n\n## Why the polarity doesn't flip\n\nWrite the PMOS saturation equation in terms of its naturally positive quantities:\n\n$$I_{SD} = \\tfrac{1}{2}\\mu_p C_{ox}\\tfrac{W}{L}\\,(V_{SG}-|V_{TH}|)^2\\,(1+\\lambda V_{SD})$$\n\nLinearizing gives:\n\n$$i_{sd} = g_m v_{sg} + g_{mb} v_{sb} + \\frac{v_{sd}}{r_o}$$\n\nNow convert to NMOS-style definitions: $i_{sd} = -i_d$, $v_{sg} = -v_{gs}$, $v_{sb} = -v_{bs}$, $v_{sd} = -v_{ds}$. Every term picks up a minus sign, the signs cancel, and you recover the NMOS equation exactly.\n\nPhysically, raising the gate relative to the source does two things:\n\n- In an NMOS, it increases the current flowing *into* the drain.\n- In a PMOS, it decreases the current flowing *out of* the drain.\n\nIncrementally, these are the same thing. The small-signal model describes only increments, so the direction of the DC bias current doesn't matter.\n\n## A common pitfall\n\nPMOS circuits are usually drawn with the source on top, so it's convenient to draw the controlled source as $g_m v_{sg}$ pointing from source to drain. That is equally correct, because both the controlling voltage and the arrow are reversed. The error is reversing only one of them, for example drawing $g_m v_{gs}$ pointing from source to drain.\n\n## What does differ: parameter values and practical details\n\n- **Transconductance:** $g_m = \\sqrt{2\\mu_p C_{ox}(W/L)|I_D|} = 2|I_D|/(V_{SG}-|V_{TH}|)$. Hole mobility is lower than electron mobility, typically by 2–4× in planar bulk CMOS, with a smaller gap in strained-Si and FinFET processes. So for the same $g_m$ and current, a PMOS must be wider. That means more capacitance and a lower $f_T$.\n- **Output resistance:** $r_o = 1/(\\lambda_p |I_D|)$, and in general $\\lambda_p \\neq \\lambda_n$.\n- **Body effect:** $g_{mb}$ depends on the n-well doping. In an n-well process, the PMOS sits in its own well, so you can tie its body to its source and eliminate $g_{mb}$. An NMOS in the shared p-substrate can't do this without a deep-n-well or triple-well option.\n- **Capacitances:** $C_{sb}$ and $C_{db}$ are p⁺/n-well junctions. The well also has its own capacitance to the substrate, which appears in the circuit if the well isn't at AC ground.\n- **Noise:** the form is the same, but the coefficients differ. PMOS devices often have lower 1/f noise, depending on the process.\n\n## Bottom line\n\nUse the same small-signal circuit for both devices. For the PMOS, plug in magnitudes ($|I_D|$, $|V_{OV}|$) and its own parameters ($\\mu_p$, $\\lambda_p$, …).\n\nAs a check, a PMOS common-source stage with load resistor $R_D$ has gain $-g_m(R_D \\parallel r_o)$, exactly like the NMOS version.",
        "format": "markdown",
        "sha256": "9324a231069831ef336ee159f46a871945cb4bbb1acc9c684ae40411ca1ef4d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model with consistent polarity conventions, which meets the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 12166,
        "total_tokens": 12201,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10723,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 12166,
        "total_tokens": 12201,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10723,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Yes, with one qualification\n\nThe PMOS small-signal model is **topologically identical** to the NMOS model. It has the same elements, the same connections, and the same polarity of the dependent sources:\n\n- a current source **g_m·v_gs from drain to source**\n- a body-effect source **g_mb·v_bs**, also from drain to source\n- **r_o** between drain and source\n- the same capacitances (C_gs, C_gd, C_db, C_sb, C_gb)\n\nThe qualification is that the **parameter values** differ (see the last section).\n\n## Why the signs don't flip\n\nIn saturation:\n\n- **NMOS** (current flowing drain → source): I_D = ½ μ_n C_ox (W/L)(V_GS − V_TH)²(1 + λV_DS)\n- **PMOS** (current flowing source → drain): I_SD = ½ μ_p C_ox (W/L)(V_SG − |V_TH|)²(1 + λV_SD)\n\nLinearizing the PMOS equation gives\n\n  i_sd = g_m·v_sg + v_sd/r_o,  with g_m = μ_p C_ox (W/L)(V_SG − |V_TH|) > 0\n\nNow express this in drain-to-source current and gate-to-source voltage, using i_sd = −i_ds, v_sg = −v_gs, and v_sd = −v_ds:\n\n  −i_ds = −g_m·v_gs − v_ds/r_o  ⟹  **i_ds = g_m·v_gs + v_ds/r_o**\n\nThis is exactly the NMOS result. A PMOS behaves like an NMOS with every voltage and current negated, and a linear relation between increments is unchanged when all its variables are negated. The body-effect term works out the same way, so for both devices i_ds = g_m·v_gs + g_mb·v_bs + v_ds/r_o.\n\n**Intuition:** Raise an NMOS gate slightly, and more current flows from drain to source. Raise a PMOS gate slightly, and |V_GS| shrinks, so less current flows from source to drain. Less current from source to drain is the same thing as an increase in drain-to-source current, so the incremental response has the same direction.\n\n## Common pitfall\n\nPMOS devices are usually drawn with the source on top, toward V_DD. In the model, the g_m·v_gs source still points from D to S, which means it points upward. That looks odd but is correct.\n\nYou can equivalently draw **g_m·v_sg pointing from S to D**. Flipping both the arrow and the controlling voltage gives the same element. Flipping only one of them is the classic sign error.\n\n**Check with an example:** a PMOS common-source stage has its source at V_DD, input at the gate, and R_D from drain to ground. The model gives A_v = −g_m(r_o ‖ R_D), exactly as for an NMOS.\n\n## What does differ (values, not form)\n\n- **g_m:** Hole mobility is roughly 2–4× lower than electron mobility. For the same W/L and current, g_m = √(2μ_p C_ox (W/L) I_D) is therefore smaller. A PMOS must be made wider to match, which adds capacitance and lowers f_T.\n- **r_o:** λ generally differs between PMOS and NMOS devices.\n- **Capacitances:** The set is the same but the values differ. The n-well also adds a well-to-substrate junction capacitance if the well is not at AC ground.\n- **Body effect:** In an n-well process, a PMOS can have its well tied to its own source, making v_bs = 0 and eliminating g_mb. An NMOS sharing the grounded substrate usually cannot do this.\n- **Noise:** PMOS devices typically show lower 1/f noise.",
        "format": "markdown",
        "sha256": "cfe56752b981b4398d1d3b417aa211e5a67ecd702500f7b0b93158cfa8f1f728"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model with consistent source-referenced polarities, and its sign derivation supports that conclusion.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 10783,
        "total_tokens": 10818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9546,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 10783,
        "total_tokens": 10818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9546,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# IX vs. VX for a Diode‑Connected NMOS\n\n## Region of operation\n\nThe gate is tied to the drain, so\n\n$$V_{GS}=V_{DS}=V_X$$\n\nThe saturation condition $V_{DS}\\ge V_{GS}-V_{TH}$ becomes $V_X \\ge V_X - V_{TH}$, which is always true. Whenever M1 is on, it is in **saturation**. A diode‑connected transistor can never enter the triode region.\n\n## Current\n\n- **$V_X < V_{TH}$:** M1 is off, so $I_X \\approx 0$ (apart from a small subthreshold tail).\n- **$V_X > V_{TH}$:** M1 is saturated, so\n\n$$I_X=\\frac{1}{2}\\mu_nC_{ox}\\frac{W}{L}\\,(V_X-V_{TH})^2\\;(1+\\lambda V_X)$$\n\n## Sketch\n\n```\n  IX\n   ^                                    .\n   |                                   .\n   |                                  .\n   |                                .\n   |                              .\n   |                           .     IX = ½μnCox(W/L)(VX − VTH)²\n   |                        .\n   |                    .\n   |               .\n   |__________ .\n   +----------+--------------------------->  VX\n   0         VTH\n     M1 off   |   M1 on (always saturated)\n```\n\n## Features of the curve\n\n- $I_X$ is zero up to $V_X = V_{TH}$. Above that it follows a square‑law parabola with its vertex at $V_X = V_{TH}$ (zero slope there).\n- The slope is the transconductance:\n$$\\frac{dI_X}{dV_X}\\approx g_m=\\mu_nC_{ox}\\frac{W}{L}(V_X-V_{TH})=\\sqrt{2\\mu_nC_{ox}\\frac{W}{L}I_X}$$\n  So the curve gets steeper as $V_X$ increases. The device behaves like a nonlinear \"resistor\" whose small‑signal resistance is $1/g_m \\parallel r_o$.\n- With $\\lambda \\neq 0$, the curve rises slightly faster than an ideal parabola.\n\n## If VX goes negative\n\nThe node at $V_X$ then becomes the source. Since the gate is tied to it, $V_{GS}=0$ and the channel stays off, so $I_X\\approx 0$.\n\nThis assumes the bulk is grounded, which is the usual convention when it isn't drawn. Once $V_X$ falls below about −0.7 V, the n⁺‑drain/p‑substrate junction becomes forward biased. $I_X$ then turns negative and grows exponentially, like an ordinary diode.",
        "format": "markdown",
        "sha256": "dfa1ecbc05c73f7914c763855bb12eb65944aeed7d77b5f8b721af0b99adfdbf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, near-zero current below threshold, and saturated square-law rise above threshold. The added channel-length-modulation and negative-voltage discussion is consistent with the essential answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1306,
        "output_tokens": 9135,
        "total_tokens": 10441,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8239,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1306,
        "output_tokens": 9135,
        "total_tokens": 10441,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8239,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# I_X vs. V_X for a Diode‑Connected NMOS\n\n## Setup\n\nThe gate and drain are both tied to V_X and the source is grounded, so\n\n$$V_{GS}=V_{DS}=V_X$$\n\n## Region 1: V_X < V_TH\n\nNo channel forms, so M₁ is off:\n\n$$I_X = 0$$\n\n## Region 2: V_X > V_TH\n\nM₁ turns on. The saturation condition is\n\n$$V_{DS}\\ge V_{GS}-V_{TH}\\;\\Longleftrightarrow\\; V_X \\ge V_X - V_{TH}$$\n\nThis always holds because V_TH > 0. So once the device turns on, it is always in saturation and can never enter the triode region:\n\n$$I_X=\\tfrac12\\,\\mu_nC_{ox}\\frac{W}{L}\\,(V_X-V_{TH})^2$$\n\n## Shape of the curve\n\nThe slope of the curve is\n\n$$\\frac{dI_X}{dV_X}=\\mu_nC_{ox}\\frac{W}{L}(V_X-V_{TH}) = g_m$$\n\n- The slope is zero at V_X = V_TH, so the curve leaves the axis tangentially.\n- The slope then grows linearly with V_X, so the curve is a parabola with its vertex at V_TH.\n\n```\n  IX\n   ^\n   |                                   /\n   |                                  /\n   |                                 /\n   |                                /\n   |                              /\n   |                            /\n   |                         .'\n   |                     _.-'\n   |               __..-'\n   +---------------+---------------------------> VX\n   0              VTH\n   |<-- M1 off --->|<------ M1 saturated ------>\n        IX = 0       IX = ½µnCox(W/L)(VX − VTH)²\n```\n\n## Remarks\n\n- **Channel‑length modulation:** Including it gives I_X = ½µₙC_ox(W/L)(V_X − V_TH)²(1 + λV_X). The curve rises slightly more steeply, but its shape is the same.\n- **Small‑signal behavior:** The device acts as a two‑terminal \"diode\" whose incremental resistance is 1/g_m (∥ r_o).\n- **Subthreshold conduction:** In reality, a small current flows just below V_TH, so I_X is not exactly zero there.",
        "format": "markdown",
        "sha256": "ab55607c771669ef7d6d171e123e69c501276272b3ae1d9c25aa0ec907207c92"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold and a quadratic saturated-current rise above threshold. The added subthreshold and channel-length-modulation remarks do not detract.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1306,
        "output_tokens": 11837,
        "total_tokens": 13143,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1306,
        "output_tokens": 11837,
        "total_tokens": 13143,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# I_X vs. V_X for a Diode-Connected NMOS\n\n## Setup\n\nThe gate is tied to the drain, and the source is grounded. Therefore\n\n$$V_{GS}=V_{DS}=V_X,\\qquad V_{SB}=0 \\;\\;(\\text{no body effect})$$\n\n## Region 1: V_X < V_TH (M1 off)\n\n- For 0 < V_X < V_TH, no channel forms, so **I_X = 0**.\n- For V_X < 0, node X is now the lower-potential terminal, so it acts as the source. The gate is tied to it, so V_GS = 0 and the device is still off. **I_X = 0.**\n\n## Region 2: V_X > V_TH (M1 on, always saturated)\n\nBecause V_DS = V_GS, it is always true that V_DS > V_GS − V_TH. The transistor can never enter triode. Once it turns on, it is in saturation:\n\n$$I_X=\\frac{1}{2}\\mu_nC_{ox}\\frac{W}{L}\\,(V_X-V_{TH})^2$$\n\nWith channel-length modulation, multiply by (1 + λV_X).\n\n## Sketch\n\n```\n                IX\n                ^\n                |                                /\n                |                               /\n                |                             /\n                |                            /     IX = ½μnCox(W/L)(VX − VTH)²\n                |                          /       (saturation)\n                |                        /\n                |                      /\n                |                  _.-'\n                |            ___..-'\n ===============+=========+------------------------------------> VX\n                0        VTH\n <--- M1 off, IX = 0 --->\n```\n\n## Key features of the curve\n\n- **I_X = 0 for all V_X < V_TH**, including negative V_X. The device acts like a diode with turn-on voltage V_TH.\n- **Square-law rise beyond V_TH.** The parabola starts tangent to the axis, with zero slope at V_X = V_TH.\n- **Slope grows linearly with V_X:**\n  $$\\frac{dI_X}{dV_X}=g_m=\\mu_nC_{ox}\\frac{W}{L}(V_X-V_{TH})=\\sqrt{2\\mu_nC_{ox}\\frac{W}{L}I_X}$$\n  So the device's small-signal resistance (≈ 1/g_m) falls as V_X increases.\n\n## Second-order effects\n\n- Subthreshold conduction gives a small exponential tail just below V_TH.\n- Channel-length modulation (λ) makes the curve slightly steeper than the ideal parabola.\n- If the substrate is grounded, the drain–substrate junction forward-biases for V_X below about −0.7 V. A large negative I_X would then flow.",
        "format": "markdown",
        "sha256": "b5fadf26f051c2848c3741e3ea2600c9894b8f2023f9c843ffc109f3ebe62f43"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS as off up to threshold and saturated with a quadratic current rise above threshold. The negative-voltage junction-conduction note is also consistent with the solution; the main sketch and conclusion are correct.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1306,
        "output_tokens": 22062,
        "total_tokens": 23368,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1306,
        "output_tokens": 22062,
        "total_tokens": 23368,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# I_X versus V_X for M1 with its drain held at 1 V\n\nHere V_GS = V_X and V_DS = 1 V is fixed. As V_X rises, M1 moves through three regions. Assume λ = 0.\n\n## 1. V_X < V_TH: M1 is off\n\nNo channel forms, so I_X = 0.\n\n## 2. V_TH ≤ V_X ≤ V_TH + 1 V: saturation\n\nM1 stays saturated as long as V_DS ≥ V_GS − V_TH, that is, 1 V ≥ V_X − V_TH.\n\n$$I_X=\\tfrac12\\mu_nC_{ox}\\frac{W}{L}(V_X-V_TH)^2$$\n\nThe current rises as a parabola (square law). Its slope is g_m = μnCox(W/L)(V_X − V_TH), which grows linearly with V_X.\n\n## 3. V_X > V_TH + 1 V: triode\n\nThe overdrive now exceeds V_DS = 1 V, so M1 enters the triode region.\n\n$$I_X=\\mu_nC_{ox}\\frac{W}{L}\\Big[(V_X-V_TH)(1\\,\\text V)-\\tfrac12(1\\,\\text V)^2\\Big]=\\mu_nC_{ox}\\frac{W}{L}(V_X-V_TH-0.5\\,\\text V)$$\n\nThe current rises along a straight line with constant slope μnCox(W/L)(1 V).\n\n## Behavior at the boundary V_X = V_TH + 1 V\n\n- **Current:** both expressions give I_X = ½μnCox(W/L)(1 V)².\n- **Slope:** both give μnCox(W/L)(1 V).\n\nSo the parabola blends smoothly into the straight line, with no kink. If the line is extended backward, it crosses the V_X axis at V_TH + 0.5 V.\n\n## Sketch\n\n```\n I_X\n  ^                                         /\n  |                                       /\n  |                                     /    Triode: linear,\n  |                                   /      slope = μnCox(W/L)(1 V)\n  |                                 /\n  |   ½μnCox(W/L)(1V)² . . . . . .●   \n  |                              /:\n  |                           .   :\n  |                        .      :   Saturation:\n  |                    .          :   square law (parabola)\n  |               .               :\n  |     Off   .                   :\n  +==========+--------------------+----------------------> V_X\n  0        V_TH               V_TH + 1 V\n```\n\nFor example, with V_TH = 0.4 V:\n\n| V_X range | Region | I_X behavior |\n|---|---|---|\n| Below 0.4 V | Off | I_X = 0 |\n| 0.4 V to 1.4 V | Saturation | Rises quadratically |\n| Above 1.4 V | Triode | Rises linearly |\n\nIf λ ≠ 0, the saturation current is simply multiplied by the constant (1 + λ·1 V), since V_DS is fixed. The shape of the curve stays the same.",
        "format": "markdown",
        "sha256": "85fa60c08f056c4990455d9796ef0f3367b9eb8f60be5adbb8cf98cf5556f990"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the off, saturation, and triode regions and gives the quadratic-to-linear current trend with the correct transition at V_X = V_TH + 1 V. The extra slope and boundary details are also consistent.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1461,
        "output_tokens": 6809,
        "total_tokens": 8270,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1461,
        "output_tokens": 6809,
        "total_tokens": 8270,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# I_X vs. V_X for an NMOS with V_DS Fixed at 1 V\n\n## Setup\n\n- The source is grounded, so V_GS = V_X.\n- The drain is tied to the 1‑V battery, so V_DS = 1 V for all V_X.\n- I_X is the drain current I_D.\n\nI assume the usual default values: V_TH = 0.4 V, μnCox = 200 µA/V², λ = 0. W/L is not given, so it stays as a symbol.\n\n## Regions of operation\n\n**1. Off: V_X < V_TH (0.4 V)**\n\nThere is no channel, so I_X = 0.\n\n**2. Saturation: V_TH < V_X < V_TH + 1 V (0.4 V to 1.4 V)**\n\nThe device is saturated because V_DS = 1 V ≥ V_GS − V_TH = V_X − V_TH.\n\n$$I_X=\\tfrac12\\mu_nC_{ox}\\frac{W}{L}(V_X-V_TH)^2$$\n\nThis is a parabola that starts at V_TH with zero slope.\n\n**3. Triode: V_X > V_TH + 1 V (above 1.4 V)**\n\nNow V_X − V_TH exceeds V_DS, so the device enters triode:\n\n$$I_X=\\mu_nC_{ox}\\frac{W}{L}\\Big[(V_X-V_TH)(1\\,\\text{V})-\\tfrac12(1\\,\\text{V})^2\\Big]=\\mu_nC_{ox}\\frac{W}{L}\\,(V_X-V_TH-0.5\\,\\text{V})$$\n\nBecause V_DS is constant, this is a **straight line** with slope μnCox(W/L)(1 V).\n\n## The transition point (V_X = V_TH + 1 V = 1.4 V)\n\n- **Current:** I_X = ½μnCox(W/L)(1 V)², which is about 100 µA·(W/L).\n- **Slope from the saturation side:** μnCox(W/L)(V_X − V_TH) = μnCox(W/L)(1 V).\n- **Slope from the triode side:** μnCox(W/L)(1 V).\n\nThe slopes match, so the straight line is tangent to the parabola and the curve has no kink. Extended backward, the line crosses the V_X axis at V_TH + 0.5 V = 0.9 V.\n\n## Sketch\n\n```\n I_X\n  ^                                   /\n  |                                  /\n  |                                 /   TRIODE: straight line,\n  |                                /    slope = μnCox(W/L)·(1 V)\n  |                               /\n  |  ½μnCox(W/L)(1V)² - - - - - -●\n  |                           _.-'|\n  |                       _.-'    |   SATURATION:\n  |                   _.-'        |   ½μnCox(W/L)(VX − VTH)²\n  |   OFF        _.-'             |\n  |__________.--'_________________|__________________> V_X\n  0        V_TH               V_TH + 1 V\n          (0.4 V)              (1.4 V)\n```\n\nIn summary, I_X is zero up to V_TH, then rises as a square law (saturation) up to V_X = V_TH + 1 V. Beyond that it rises linearly (triode), joining the parabola smoothly.",
        "format": "markdown",
        "sha256": "ad720fd7177503640b4616f474d2ef838ce956cdee1393674e800941feb197db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the off, saturation, and triode regions and gives the required quadratic-to-linear rise. The added numerical assumptions are explicitly illustrative and do not alter the conclusion.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1461,
        "output_tokens": 6827,
        "total_tokens": 8288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1461,
        "output_tokens": 6827,
        "total_tokens": 8288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# I_X vs. V_X for an NMOS with a 1 V drain\n\n**Setup:** The source is grounded, so\n- V_GS = V_X\n- V_DS = 1 V (fixed by the battery)\n- I_X = I_D (the gate draws no current)\n\nAs V_X rises, the transistor moves through three regions.\n\n## 1. Off: V_X < V_TH\nThere is no channel, so **I_X = 0**.\n\n## 2. Saturation: V_TH < V_X < V_TH + 1 V\nThe saturation condition V_DS ≥ V_GS − V_TH becomes 1 V ≥ V_X − V_TH. So the device is saturated:\n\n$$I_X=\\tfrac12\\mu_nC_{ox}\\frac{W}{L}(V_X-V_TH)^2$$\n\nThis is a **parabola** that starts at zero with zero slope. If channel-length modulation is included, multiply by (1 + λ·1 V), which is a constant factor.\n\n## 3. Triode: V_X > V_TH + 1 V\nNow V_DS = 1 V < V_GS − V_TH, so the device is in triode:\n\n$$I_X=\\mu_nC_{ox}\\frac{W}{L}\\Big[(V_X-V_TH)(1\\,\\text{V})-\\tfrac12(1\\,\\text{V})^2\\Big]$$\n\nThis is a **straight line** in V_X with slope μnCox(W/L)(1 V).\n\n## The transition point (V_X = V_TH + 1 V)\n- Both equations give I_X = ½ μnCox(W/L)(1 V)².\n- Both slopes equal μnCox(W/L)(1 V).\n- So the line is **tangent** to the parabola and the curve bends smoothly into a straight line.\n- Extended backward, the line crosses the V_X axis at V_TH + 0.5 V.\n\n## Sketch\n\n```\n I_X\n  ^                                         /\n  |                                       /   Triode: linear,\n  |                                     /     slope = μnCox(W/L)(1 V)\n  |                                   /\n  |                                 /\n  |                               ●   I_X = ½μnCox(W/L)(1 V)²\n  |                           . ·\n  |                       . ·     Saturation:\n  |                   . ·         ½μnCox(W/L)(V_X − V_TH)²\n  |              . · ·\n  |_________ . ·\n  +---------+-----------------------+---------------> V_X\n  0       V_TH                 V_TH + 1 V\n     Off   |     Saturation        |     Triode\n```\n\nThe slope dI_X/dV_X (that is, g_m) increases linearly through saturation. It then levels off at the constant value μnCox(W/L)·V_DS once the device enters triode.\n\n**Numerical example:** With V_TH = 0.4 V and μnCox = 200 µA/V²:\n- The device turns on at 0.4 V and enters triode at 1.4 V.\n- At V_X = 1.4 V, I_X = 100 µA·(W/L).\n- Beyond 1.4 V, I_X rises at 200 µA/V·(W/L).",
        "format": "markdown",
        "sha256": "b5eaff4e50e8d8223065cdc1b179010148e8fbb30d8209e6892d2b4fe7d3eeda"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the off, saturation, and triode regions, with the expected quadratic rise up to V_TH + 1 V and roughly linear rise thereafter. The equations and transition behavior are consistent with the circuit.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1461,
        "output_tokens": 6073,
        "total_tokens": 7534,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5038,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1461,
        "output_tokens": 6073,
        "total_tokens": 7534,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5038,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# No, it cannot act as a current source\n\n**1. Terminal voltages**\n\nThe arrow marks the source, so this is a PMOS with its source at the top node (voltage V_X). Its gate and drain are both grounded. Therefore:\n\n- V_SG = V_X\n- V_SD = V_X\n\n**2. Region of operation**\n\n- If V_X < |V_THP|, the device is off and I_X ≈ 0.\n- If V_X > |V_THP|, the device is on. Because the gate and drain are tied together, it is diode-connected. Since V_SD = V_SG > V_SG − |V_THP|, it is always in saturation:\n\n$$I_X=\\frac12\\mu_pC_{ox}\\frac{W}{L}\\left(V_X-|V_{THP}|\\right)^2(1+\\lambda V_X)$$\n\n**3. Why it is not a current source**\n\nA current source must deliver a current that is nearly independent of the voltage across it. That is, it must have a high incremental impedance.\n\nHere, the voltage across the device, V_X, is also its control voltage, V_SG. Any change in V_X directly changes V_SG, so I_X changes with the square of V_X. The small-signal impedance seen at node X is low:\n\n$$R_X=\\frac{1}{g_m}\\Big\\|\\,r_O\\approx\\frac{1}{g_m}$$\n\nSo the device behaves like a nonlinear two-terminal resistor (a \"diode\"), not a current source.\n\n**Remark**\n\nBeing in saturation is not enough. A MOSFET acts as a current source only when its gate–source voltage is held constant and the varying voltage appears at the drain. For a PMOS, this means:\n\n- source tied to V_DD,\n- gate held at a fixed bias V_b,\n- load connected to the drain.\n\nThen I_D ≈ ½μpCox(W/L)(V_DD − V_b − |V_THP|)², which is nearly independent of the drain voltage, and the output impedance is approximately r_O.",
        "format": "markdown",
        "sha256": "118790d32553e4423fcc7a6494aa76ce2bcb0985a70d3565f01be207f974d918"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS and its grounded gate/drain connections, explains that the diode-connected device has low small-signal impedance (about 1/gm) and therefore cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 578,
        "output_tokens": 5941,
        "total_tokens": 6519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5290,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 578,
        "output_tokens": 5941,
        "total_tokens": 6519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5290,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# No, it cannot act as a current source\n\n**Terminal voltages.** M₁ is a PMOS. Its source is node X, and its gate and drain are both grounded. So\n\n$$V_{SG}=V_X,\\qquad V_{SD}=V_X$$\n\nThe gate and drain are at the same potential, which makes this a **diode-connected** transistor.\n\n**Behavior as V_X varies:**\n\n- **V_X < |V_TH,p|:** the transistor is off, so I_X = 0.\n- **V_X > |V_TH,p|:** the transistor turns on and is always in saturation, because V_SD = V_SG > V_SG − |V_TH,p|. The current is\n\n$$I_X=\\frac12\\mu_pC_{ox}\\frac{W}{L}\\left(V_X-|V_{TH,p}|\\right)^2(1+\\lambda V_X)$$\n\n**Why this is not a current source.** A current source must deliver a current that is nearly independent of the voltage across it. Here, V_X sets V_SG directly, so I_X grows with the square of V_X. For example, with |V_TH| = 0.5 V, raising V_X from 1 V to 1.5 V makes the current four times larger.\n\nThe small-signal impedance looking into the source confirms this:\n\n$$R_X=\\frac{1}{g_m}\\parallel r_O\\approx\\frac{1}{g_m}$$\n\nThis is a low impedance, so the device behaves like a nonlinear resistor (a \"diode\"), not a high-impedance current source.\n\n**What would work instead.** Being in saturation is not enough. For a MOSFET to act as a current source, its V_GS must be held constant while the terminal voltage changes only V_DS. For a PMOS, that means tying the source to V_DD, applying a fixed bias to the gate, and taking the current from the drain. Then I_X stays nearly constant as long as the device remains in saturation, and the output impedance is r_O.",
        "format": "markdown",
        "sha256": "a37c11664764ada7243319d2ab548922d3494e4f4abb9d17f0c347faa1920c1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as a PMOS with source at X and gate/drain grounded, explains its diode-connected low impedance (about 1/gₘ), and concludes it cannot act as a current source. Minor idealizations in the current example do not affect the answer.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 578,
        "output_tokens": 9940,
        "total_tokens": 10518,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 578,
        "output_tokens": 9940,
        "total_tokens": 10518,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# No, it cannot act as a current source.\n\n**Configuration**\n\nM₁ is a PMOS. Its source is the terminal X, where I_X enters, and both its gate and drain are grounded. Because the gate and drain are tied together, M₁ is a **diode‑connected** transistor:\n\n$$V_{SG} = V_X,\\qquad V_{SD} = V_X$$\n\n**Region of operation**\n\n- M₁ turns on only when V_X > |V_THP|.\n- Once on, V_SD = V_SG > V_SG − |V_THP| always holds, so M₁ is **always in saturation**.\n\n**Current**\n\n$$I_X = \\frac{1}{2}\\mu_p C_{ox}\\frac{W}{L}\\left(V_X - |V_{THP}|\\right)^2 \\;(1+\\lambda V_X)$$\n\nI_X is zero for V_X < |V_THP| and then rises quadratically with V_X.\n\n**Why this is not a current source**\n\nBeing in saturation is not enough. A MOSFET behaves as a current source only when its gate‑source voltage is held fixed and the current is taken from the drain. Then the drain voltage can change while the current stays nearly constant.\n\nHere the terminal whose voltage changes is the **source**. Any change in V_X directly changes V_SG, so the current changes strongly with V_X.\n\n**Small-signal view**\n\nGate and drain are both at AC ground, so the impedance seen at X is:\n\n$$r_X = \\frac{1}{g_m}\\,\\|\\,r_o \\approx \\frac{1}{g_m}$$\n\nThis is a low impedance. A good current source would need a very high one, ideally infinite.\n\n**Conclusion**\n\nM₁ behaves like a nonlinear two‑terminal resistor (a \"diode\"), not a current source. To use a PMOS as a current source, tie its source to a fixed supply such as V_DD, bias its gate with a constant voltage, and draw the current from the drain. Its output impedance is then r_o, which is large.",
        "format": "markdown",
        "sha256": "707f75607b41b76e2d62e3f03da0392463799c77a20bc1080915f1d6b0a51b19"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a diode-connected PMOS with source at X and grounded gate/drain, and explains that its low incremental impedance (about 1/gm) makes it a nonlinear resistor rather than a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 578,
        "output_tokens": 6880,
        "total_tokens": 7458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6221,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 578,
        "output_tokens": 6880,
        "total_tokens": 7458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6221,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# PMOS Common-Source Stage with Source Degeneration\n\n## What the circuit is\n\nM1 is a **PMOS common-source amplifier with source degeneration**. The input drives the gate, and the output is taken at the drain. R_D is the load, and R_S is the degeneration resistor. The bias current flows VDD → R_S → M1 (source to drain) → R_D → ground, so:\n\n$$V_S=V_{DD}-I_DR_S,\\qquad V_{out}=I_DR_D,\\qquad V_{SG}=V_{DD}-I_DR_S-V_{in}$$\n\nNotation: β = μ_pC_ox(W/L). The n-well (body) is assumed to be tied to V_DD.\n\n---\n\n## 1. Large-signal behavior (V_out vs. V_in)\n\nFor simplicity, this section neglects λ and the body effect.\n\n**(1) M1 off:** when V_in > V_DD − |V_TH|, I_D = 0, V_S = V_DD and **V_out = 0**.\n\n**(2) M1 saturated:** as V_in falls below V_DD − |V_TH|,\n\n$$I_D=\\frac{\\beta}{2}\\big(V_{DD}-V_{in}-|V_{TH}|-I_DR_S\\big)^2$$\n\nSolving this quadratic for the overdrive V_ov = V_SG − |V_TH| gives:\n\n$$V_{ov}=\\frac{\\sqrt{1+2\\beta R_S(V_{DD}-V_{in}-|V_{TH}|)}-1}{\\beta R_S},\\qquad V_{out}=\\frac{R_D}{R_S}\\big(V_{DD}-V_{in}-|V_{TH}|-V_{ov}\\big)$$\n\nV_ov grows only like the square root of the input drive. The characteristic therefore approaches a straight line of slope −R_D/R_S, which is the linearizing effect of degeneration.\n\n**(3) M1 in triode:** saturation requires V_D ≤ V_G + |V_TH|, i.e., V_out ≤ V_in + |V_TH|.\n- At the edge, V_SD = V_ov. KVL along the branch then gives:\n\n$$V_{DD}=V_{ov1}+\\tfrac{\\beta}{2}(R_S+R_D)V_{ov1}^2\\Rightarrow V_{ov1}=\\frac{\\sqrt{1+2\\beta(R_S+R_D)V_{DD}}-1}{\\beta(R_S+R_D)}$$\n\n$$V_{in1}=\\tfrac{\\beta}{2}R_DV_{ov1}^2-|V_{TH}|$$\n\n- For V_in < V_in1, the slope collapses and V_out levels off toward ≈ V_DD·R_D/(R_S+R_D+R_on).\n- If V_in1 < 0, M1 stays saturated over the whole input range.\n\n```\nVout\n ^\n │ ──────────────────-._     <- (3) triode\n │                      `.\n │                        \\     <- (2) saturation, slope -> -R_D/R_S\n │                         \\\n │                          `.\n │                            `-._   (1) off, Vout = 0\n └─────────────────────┬──────────┴━━━━━━━━━━━━> Vin\n 0                   Vin1     VDD-|VTH|       VDD\n```\n\n---\n\n## 2. Small-signal voltage gain\n\n**Key observation:** V_DD is an AC ground, so R_S simply connects the source to ground. The PMOS small-signal model is identical to the NMOS model. The circuit is therefore the familiar NMOS degenerated CS stage drawn upside down, and **the gain is inverting**. Using a PMOS does not flip the sign.\n\nLet i be the signal current flowing down through R_S, M1 and R_D:\n\n$$v_{out}=iR_D,\\qquad v_s=-iR_S,\\qquad i=g_m v_{sg}=g_m(v_s-v_{in})$$\n\n$$\\Rightarrow\\; i=-\\frac{g_m v_{in}}{1+g_mR_S},\\qquad \\boxed{A_v=-\\frac{g_mR_D}{1+g_mR_S}=-\\frac{R_D}{1/g_m+R_S}}$$\n\n**Intuition:**\n- V_in rises → V_SG falls → I_D falls → V_out falls.\n- The smaller drop across R_S lets V_S rise, which partially restores V_SG. This is local negative feedback with loop gain g_mR_S.\n- The effective transconductance becomes G_m = g_m/(1+g_mR_S).\n\n**Useful limits:**\n- If g_mR_S ≫ 1, then A_v ≈ −R_D/R_S. The gain becomes a resistor ratio, nearly independent of the transistor and the signal level.\n- Substituting g_m = 2I_D/V_ov gives |A_v| = 2I_DR_D/(V_ov + 2I_DR_S). The gain is therefore bounded by the DC voltage drops on R_D and R_S, i.e., by headroom.\n- |A_v| grows as V_in decreases and peaks at the edge of triode.\n\n**Body effect and channel-length modulation:** the source falls below the n-well potential, which raises |V_TH|. Including g_mb and r_o:\n\n$$A_v=-\\frac{g_mr_oR_D}{r_o+R_S+R_D+(g_m+g_{mb})r_oR_S}\\;\\xrightarrow{r_o\\to\\infty}\\;-\\frac{g_mR_D}{1+(g_m+g_{mb})R_S}$$\n\nTying the n-well to M1's source removes g_mb, at the cost of extra well capacitance at the source.\n\n---\n\n## 3. Input and output resistance\n\n$$R_{in}\\to\\infty\\ \\text{(gate)},\\qquad R_{out}=R_D\\,\\big\\|\\,\\Big\\{\\big[1+(g_m+g_{mb})R_S\\big]r_o+R_S\\Big\\}\\approx R_D$$\n\nDegeneration raises the resistance seen looking into the drain by about (1 + g_mR_S).\n\n---\n\n## 4. Trade-offs and other remarks\n\n- **Gain vs. linearity:** degeneration reduces the gain by (1+g_mR_S) but makes it more linear and more predictable.\n- **Swing:** V_out must stay at or below V_in + |V_TH| for M1 to remain saturated. R_S also consumes I_DR_S of headroom.\n- **Noise:** the input-referred thermal noise is\n  $\\overline{v_{n,in}^2}=4kT\\left[\\frac{\\gamma}{g_m}+R_S+\\frac{(1/g_m+R_S)^2}{R_D}\\right]$.\n  Here γ is the channel thermal-noise coefficient, not the body-effect coefficient. R_S's noise appears directly at the input.\n- **Frequency:** the input capacitance is C_in ≈ C_GS/(1+g_mR_S) + (1+|A_v|)C_GD, where the second term is the Miller effect. The output pole is ≈ 1/(R_out·C_out).",
        "format": "markdown",
        "sha256": "d82a7114db8b9379ffee4779e977ff6f749621c34b32d084b7ad4d13a0d03693"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS). This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 33284,
        "total_tokens": 34846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 33284,
        "total_tokens": 34846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# PMOS Common-Source Stage with Source Degeneration\n\nM1 is a common-source amplifier. The input drives the gate, R_S degenerates the source to V_DD, and the output is taken at the drain across R_D to ground. It is the upside-down version of the NMOS degenerated CS stage.\n\nNotation: $\\beta=\\mu_pC_{ox}W/L$, $V_{TP}=|V_{THP}|$. The n-well (body) is assumed tied to V_DD.\n\n---\n\n## 1. Large-signal behavior\n\nThe gate draws no current, so the same $I_D$ flows through R_S, M1 and R_D:\n\n$$V_{out}=I_DR_D,\\qquad V_S=V_{DD}-I_DR_S=V_{in}+V_{SG}$$\n\n$$\\boxed{V_{out}=\\frac{R_D}{R_S}\\left(V_{DD}-V_{in}-V_{SG}\\right)}$$\n\nNow sweep $V_{in}$ downward from $V_{DD}$.\n\n**(a) M1 off:** For $V_{in}>V_{DD}-V_{TP}$, we have $I_D=0$, $V_S=V_{DD}$ and $V_{out}=0$.\n\n**(b) M1 saturated:** Let $V_0\\equiv V_{DD}-V_{in}-V_{TP}$. The device equation is\n\n$$I_D=\\tfrac12\\beta\\,(V_0-I_DR_S)^2$$\n\nSolving the quadratic gives the overdrive and output:\n\n$$V_{ov}=V_{SG}-V_{TP}=\\frac{\\sqrt{1+2\\beta R_SV_0}-1}{\\beta R_S},\\qquad V_{out}=\\frac{R_D}{R_S}(V_0-V_{ov})$$\n\nThe slope of the characteristic is\n\n$$\\frac{dV_{out}}{dV_{in}}=-\\frac{R_D}{R_S}\\left(1-\\frac{1}{\\sqrt{1+2\\beta R_SV_0}}\\right)$$\n\nThis slope is zero at turn-on. As $V_{in}$ drops, it approaches $-R_D/R_S$, so the characteristic becomes almost a straight line.\n\n**(c) M1 in triode:** M1 stays saturated while $V_D\\le V_G+V_{TP}$, i.e. $V_{out}\\le V_{in}+V_{TP}$. Because $V_{out}$ rises as $V_{in}$ falls, this limit is reached at\n\n$$V_{in1}=\\frac{R_D}{R_S+R_D}\\,(V_{DD}-V_{ov1})-V_{TP},\\qquad \\text{where } \\tfrac{\\beta}{2}(R_S+R_D)V_{ov1}^2+V_{ov1}=V_{DD}$$\n\nBelow $V_{in1}$, M1 behaves like a resistor $R_{on}\\approx 1/[\\beta(V_{SG}-V_{TP})]$. The gain collapses and $V_{out}\\to V_{DD}R_D/(R_S+R_D+R_{on})$. If $V_{in1}<0$, M1 never leaves saturation.\n\n| Input range | M1 | Output |\n|---|---|---|\n| $V_{in}>V_{DD}-V_{TP}$ | off | $V_{out}=0$ |\n| $V_{in1}<V_{in}<V_{DD}-V_{TP}$ | saturation | slope goes from 0 toward $-R_D/R_S$ |\n| $V_{in}<V_{in1}$ | triode | flattens toward $V_{DD}R_D/(R_S+R_D+R_{on})$ |\n\n---\n\n## 2. Small-signal gain (M1 saturated)\n\nV_DD and ground are both AC ground, so the small-signal circuit is identical to the NMOS degenerated CS stage.\n\n**Ideal device ($\\lambda=\\gamma=0$):** KCL at the source gives\n\n$$v_s=\\frac{g_mR_S}{1+g_mR_S}\\,v_{in}$$\n\nSo the source follows the gate, and $v_{sg}=-v_{in}/(1+g_mR_S)$. The drain current $g_mv_{sg}$ flows into R_D:\n\n$$A_v=-\\frac{g_mR_D}{1+g_mR_S}=-\\frac{R_D}{R_S+1/g_m}$$\n\nThis is the familiar rule: drain resistance divided by total source-path resistance.\n\n**With body effect:**\n\n$$A_v=-\\frac{g_mR_D}{1+(g_m+g_{mb})R_S}$$\n\n**With body effect and $r_o$:**\n\n$$A_v=-\\frac{g_mr_oR_D}{R_D+R_S+r_o+(g_m+g_{mb})r_oR_S}$$\n\n---\n\n## 3. Impedances and effective transconductance\n\n- **Input resistance:** $R_{in}\\to\\infty$, since the input is a MOS gate.\n- **Output resistance:** $R_{out}=R_D\\parallel\\{[1+(g_m+g_{mb})r_o]R_S+r_o\\}\\approx R_D$. The degenerated drain looks like a very large resistance.\n- **Effective transconductance:** $G_m=\\dfrac{g_m}{1+(g_m+g_{mb})R_S}\\;\\to\\;\\dfrac{1}{R_S}$ for large $g_mR_S$. The gain is then $A_v=-G_mR_{out}$.\n\n---\n\n## 4. Interpretation and design notes\n\n- **Feedback view:** R_S provides series-series negative feedback with loop gain ≈ $g_mR_S$. The gain drops by $(1+g_mR_S)$.\n- **Benefit:** For $g_mR_S\\gg1$, $A_v\\approx -R_D/R_S$. The gain is then set by a resistor ratio, nearly independent of $\\mu_p$, $V_{TH}$ and bias current. It is also much more linear than the plain CS stage, whose gain $-g_mR_D$ varies with $V_{in}$.\n- **Costs:**\n  - lower gain;\n  - extra headroom of $I_DR_S$;\n  - output swing limited to $V_{out}\\le V_{in}+V_{TP}$.\n- **Body effect:** It slightly lowers the gain. It can be removed by tying M1's n-well to its source, which sets $g_{mb}=0$.\n- **High frequency:**\n  - $C_{GD}$ is Miller-multiplied by $(1+|A_v|)$.\n  - $C_{GS}$ is partly bootstrapped, appearing as roughly $C_{GS}/(1+g_mR_S)$.\n  - The output pole is at about $1/(R_{out}C_L)$.",
        "format": "markdown",
        "sha256": "79560c0b48f2b8b49970b6549a848839b7ec6cb6ab0f95ec88d8eb2fe8ce4d15"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS). The body-effect refinement is also consistent with the golden solution.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 23058,
        "total_tokens": 24620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20763,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 23058,
        "total_tokens": 24620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20763,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# PMOS Common-Source Stage with Source Degeneration\n\n## What the circuit is\n\nM1 is a PMOS common-source amplifier with source degeneration. The input drives the gate and the output is taken at the drain. R_S connects V_DD to the source, and R_D is the drain load to ground. It is the upside-down version of the degenerated NMOS CS stage, and it is **inverting**.\n\n**Key exact relation.** The gate draws no current, so the same current I_D flows through R_S, M1 and R_D:\n\n$$V_S = V_{DD}-I_DR_S,\\qquad V_{out}=I_DR_D \\;\\;\\Rightarrow\\;\\; V_{out}=\\frac{R_D}{R_S}\\,(V_{DD}-V_S)$$\n\nThe output is a scaled, inverted copy of the voltage across R_S.\n\n---\n\n## 1. Large-signal (DC) behavior\n\nLet β = μ_pC_ox(W/L). Sweep V_in downward from V_DD.\n\n**(a) Off.** For V_in > V_DD − |V_TH|, M1 is off: I_D = 0, V_S = V_DD and V_out = 0.\n\n**(b) Saturation.** M1 turns on and\n\n$$I_D=\\tfrac{\\beta}{2}\\left(V_{DD}-I_DR_S-V_{in}-|V_{TH}|\\right)^2$$\n\nDefine u = V_DD − V_in − |V_TH|, the overdrive M1 would have without R_S. Solving the quadratic gives\n\n$$V_{ov}=\\frac{\\sqrt{1+2\\beta R_S u}-1}{\\beta R_S},\\qquad V_{out}=\\frac{R_D}{R_S}(u-V_{ov})$$\n\n- With weak degeneration, V_out ≈ (β/2)R_D u², the square law of a plain CS stage.\n- With strong degeneration, V_out ≈ (R_D/R_S)u, which is nearly linear.\n\n**(c) Triode.** M1 stays saturated only while the drain is at most one threshold above the gate: V_out ≤ V_in + |V_TH|. The boundary occurs at\n\n$$V_{ov,E}=\\frac{\\sqrt{1+2\\beta(R_S+R_D)V_{DD}}-1}{\\beta(R_S+R_D)},\\qquad V_{in1}=\\frac{R_D}{R_S+R_D}(V_{DD}-V_{ov,E})-|V_{TH}|$$\n\n- For V_in < V_in1, M1 acts like a resistor R_on.\n- V_out then approaches V_DD·R_D/(R_S+R_on+R_D), which is always below V_DD·R_D/(R_S+R_D).\n- If R_D is small enough that V_in1 < 0, M1 never enters triode.\n\n```\nVout\n ^\n |- - - - - - - - - - - - - - - - - - - - - - -  VDD·RD/(RS+RD)\n |*****\n |     *****            M1 in triode\n |          ***\n |             **   <-- edge of saturation: Vout = Vin + |VTH|\n |               **\n |                 **        M1 saturated:\n |                   **      slope = -gm·RD/(1+gm·RS)  (-> -RD/RS)\n |                     ***\n |                        ****\n |                            *****      M1 off: Vout = 0\n +---------------+----------------+=================+---> Vin\n 0              Vin1          VDD-|VTH|            VDD\n```\n\n---\n\n## 2. Small-signal gain (M1 in saturation)\n\nAssume λ = 0 and no body effect. The transistor current is i_d = g_m(v_s − v_in), and the source voltage is v_s = −i_d R_S. Combining these gives i_d = −g_m v_in/(1+g_mR_S), so\n\n$$\\boxed{A_v=-\\frac{g_mR_D}{1+g_mR_S}=-\\frac{R_D}{R_S+1/g_m}}$$\n\n**Dependence on bias.** From the large-signal solution, 1 + g_mR_S = √(1+2βR_S u). Substituting:\n\n$$A_v(V_{in})=-\\frac{R_D}{R_S}\\left[1-\\frac{1}{\\sqrt{1+2\\beta R_S(V_{DD}-V_{in}-|V_{TH}|)}}\\right]$$\n\nThe gain is about 0 near turn-on and approaches −R_D/R_S as M1 is driven harder.\n\n**Complete expression.** Including r_O, and body effect if the n-well is tied to V_DD:\n\n$$A_v=-\\frac{g_m r_O R_D}{R_D+R_S+r_O+(g_m+g_{mb})R_S r_O}$$\n\n---\n\n## 3. Input and output resistance\n\n- **Input:** R_in = ∞ at low frequency, since the input drives a gate.\n- **Output:**\n\n$$R_{out}=R_D\\,\\big\\|\\,\\big\\{[1+(g_m+g_{mb})R_S]\\,r_O+R_S\\big\\}\\approx R_D$$\n\n---\n\n## 4. What R_S does\n\n- **Negative feedback (series–series, loop gain g_mR_S).** The source follows the gate: v_s = [g_mR_S/(1+g_mR_S)]v_in. Only v_in/(1+g_mR_S) appears across the gate–source junction.\n- **Stabilized transconductance.** The effective transconductance is G_m = g_m/(1+g_mR_S), which tends to 1/R_S for large g_mR_S.\n- **Bounded gain.** |A_v| < R_D/R_S always. For g_mR_S ≫ 1, A_v ≈ −R_D/R_S, set by a resistor ratio. The stage is then linear and insensitive to μ_p, V_TH and temperature, at the cost of a gain reduction by (1+g_mR_S).\n- **Rule of thumb.** Gain = −(resistance seen at drain) / (resistance in source path, 1/g_m + R_S).\n- **Costs:**\n  - R_S uses voltage headroom: V_DD = I_DR_S + V_SD + I_DR_D, with V_SD ≥ V_ov required.\n  - The gain is lower.\n  - R_S adds noise: v̄²_n,in = 4kT[γ/g_m + R_S + (R_S+1/g_m)²/R_D].\n\n---\n\n## 5. High-frequency notes\n\n- **Input capacitance.** C_GS is bootstrapped by the source following the gate, so it appears as C_GS/(1+g_mR_S). C_GD is Miller-multiplied to about C_GD(1+|A_v|).\n- **Output pole.** It is approximately 1/[R_D(C_DB + C_GD + C_L)].\n- **Source-node capacitance.** A capacitance C_S at the source (for example C_SB to the n-well at V_DD) shorts R_S at high frequency:\n\n$$A_v(s)=-g_mR_D\\,\\frac{1+sR_SC_S}{1+g_mR_S+sR_SC_S}$$\n\nThis gives a zero at 1/(R_SC_S) and a pole at (1+g_mR_S)/(R_SC_S). The gain peaks from −g_mR_D/(1+g_mR_S) toward −g_mR_D, which is the principle behind continuous-time linear equalizers.",
        "format": "markdown",
        "sha256": "3bc244e2a5d57189537a1d1e152a62c3928568f802c43ead6dc24c0985b1c75c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS); the added body-effect and output-resistance refinements are consistent with the golden solution.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 30778,
        "total_tokens": 32340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28280,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 30778,
        "total_tokens": 32340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28280,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the NMOS Source Follower (Common-Drain Stage)\n\n**Circuit identification.** The input drives the gate of M1, the drain is tied to $V_{DD}$ (ac ground), and the output is taken at the source, which is loaded by $R_S$. This is a **source follower**. As usual for an NMOS device, the bulk is assumed grounded, so $V_{SB}=V_{out}$ and the **body effect** is present.\n\n---\n\n## 1. Large-Signal (DC) Behavior\n\n**Operating regions**\n\n- **$V_{in} < V_{TH}$:** M1 is off, $I_D = 0$, so $V_{out}=0$.\n- **$V_{in} > V_{TH}$:** M1 conducts. Saturation requires $V_{DS}\\ge V_{GS}-V_{TH}$:\n$$V_{DD}-V_{out} \\ge V_{in}-V_{out}-V_{TH}\\;\\Rightarrow\\; V_{in}\\le V_{DD}+V_{TH}$$\nThis always holds for $V_{in}\\le V_{DD}$, so M1 stays saturated.\n\n**Transfer equation** (with $\\lambda = 0$):\n$$\\frac{1}{2}\\mu_nC_{ox}\\frac{W}{L}\\left(V_{in}-V_{TH}-V_{out}\\right)^2=\\frac{V_{out}}{R_S},\\qquad V_{TH}=V_{TH0}+\\gamma\\left(\\sqrt{2\\Phi_F+V_{out}}-\\sqrt{2\\Phi_F}\\right)$$\n\nSo $V_{out}=V_{in}-V_{GS}$. The output follows the input, shifted down by $V_{GS}$.\n\nIf the body effect is ignored, the equation has a closed-form solution. Let $\\beta=\\mu_nC_{ox}W/L$:\n$$V_{out}=V_{in}-V_{TH}-\\frac{\\sqrt{1+2\\beta R_S(V_{in}-V_{TH})}-1}{\\beta R_S}$$\n\n**Consequences**\n\n- **Headroom loss:** the maximum output is about $V_{DD}-V_{GS}$, so the output never reaches $V_{DD}$.\n- **Nonlinearity from current variation:** $I_D=V_{out}/R_S$ changes with $V_{in}$, so $V_{GS}$ is not constant.\n- **Nonlinearity from the body effect:** $V_{TH}$ rises as $V_{out}$ rises.\n\n---\n\n## 2. Small-Signal Voltage Gain\n\nReplace M1 by two current sources from drain (ac ground) to source:\n- $g_m v_{gs}$, with $v_{gs}=v_{in}-v_{out}$\n- $g_{mb}v_{bs}$, with $v_{bs}=-v_{out}$\n\nAdd $r_o$ between drain and source. KCL at the output node gives:\n$$g_m(v_{in}-v_{out})-g_{mb}v_{out}-\\frac{v_{out}}{r_o}=\\frac{v_{out}}{R_S}$$\n\nSolving:\n$$\\boxed{A_v=\\frac{g_m R_S}{1+(g_m+g_{mb})R_S}}\\quad(\\text{with } r_o:\\ R_S\\rightarrow R_S\\parallel r_o)$$\n\nDifferentiating the large-signal equation gives the same result.\n\n**Interpretation.** The $g_{mb}$ source is controlled by its own terminal voltage, so it acts like a resistor $1/g_{mb}$ from the output to ground. The gain is then a simple voltage divider:\n$$A_v=\\frac{R_S\\parallel g_{mb}^{-1}}{R_S\\parallel g_{mb}^{-1}+g_m^{-1}}$$\n\n**Gain versus $V_{in}$**\n\n- **Near $V_{in}\\approx V_{TH}$:** $g_m\\approx 0$, so $A_v\\approx 0$.\n- **As $V_{in}$ increases:** $g_m$ grows and $A_v$ rises. Ignoring the body effect:\n$$A_v = 1-\\frac{1}{\\sqrt{1+2\\beta R_S(V_{in}-V_{TH})}}$$\n- **Upper limit ($g_mR_S\\gg1$ or $R_S\\to\\infty$):**\n$$A_v\\to\\frac{g_m}{g_m+g_{mb}}=\\frac{1}{1+\\eta}<1$$\nHere $\\eta = g_{mb}/g_m$. Even with an ideal current-source load, the body effect keeps the gain below one (typically 0.7–0.9).\n\n---\n\n## 3. Output Resistance\n\nSet $v_{in}=0$, apply a test voltage $v_x$ at the source, and find the current $i_x$ drawn from it:\n$$i_x = v_x\\left(g_m+g_{mb}+\\frac{1}{r_o}+\\frac{1}{R_S}\\right)$$\n$$\\boxed{R_{out}=\\frac{1}{g_m}\\parallel\\frac{1}{g_{mb}}\\parallel r_o\\parallel R_S\\;\\approx\\;\\frac{1}{g_m+g_{mb}}}$$\n\nThis is low, on the order of $1/g_m$.\n\n## 4. Input Impedance\n\n- **Resistance:** the input drives a gate, so $R_{in}\\to\\infty$ at low frequencies.\n- **Capacitance:** $C_{GS}$ is bootstrapped because the source follows the gate. Therefore $C_{in}\\approx C_{GD}+(1-A_v)C_{GS}$.\n\n---\n\n## 5. Numerical Example\n\nTake $g_m = 1$ mS, $\\eta = 0.2$ ($g_{mb}=0.2$ mS), $R_S = 10$ kΩ, and $r_o\\to\\infty$.\n\n- $A_v = \\dfrac{1}{1+0.2+0.1} = \\dfrac{1}{1.3}\\approx 0.77$\n- $R_{out}=1/(1.3\\text{ mS})\\approx 770\\ \\Omega$\n\n## 6. Summary\n\n| Property | Result |\n|---|---|\n| Function | Voltage buffer / level shifter ($V_{out}=V_{in}-V_{GS}$) |\n| Gain | $g_mR_S/[1+(g_m+g_{mb})R_S]$, always < 1 |\n| $R_{in}$ | ≈ ∞ |\n| $R_{out}$ | ≈ $1/(g_m+g_{mb})\\parallel R_S$ (low) |\n| Drawbacks | Gain < 1, nonlinearity, body effect, loss of $V_{GS}$ of headroom |\n\n**Common improvements**\n\n- **Current-source load:** replace $R_S$ with a current source (e.g., an NMOS biased at constant current). $I_D$ and hence $V_{GS}$ become nearly constant, which greatly improves linearity, and $A_v\\to g_m/(g_m+g_{mb}+1/r_{o1}+1/r_{o2})$.\n- **PMOS follower:** place the PMOS in its own n-well with bulk tied to source. This eliminates the body effect, at the cost of a higher output resistance because PMOS mobility is lower.",
        "format": "markdown",
        "sha256": "a383611c64cf12c0cecfb6ea9ac5255ecf13ba410dca751df6b7fb255ad384bb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, sub-unity gain, including the valid body-effect refinement. The additional analysis is consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1266,
        "output_tokens": 12845,
        "total_tokens": 14111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10362,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1266,
        "output_tokens": 12845,
        "total_tokens": 14111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10362,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# NMOS Source Follower (Common-Drain Stage) with Resistive Load\n\nThe input is at the gate and the output is at the source. The drain is tied to $V_{DD}$, which is ac ground, so this is a \"common-drain\" stage. The 3-terminal symbol implies the bulk is tied to ground, so $V_{SB}=V_{out}$ and the **body effect is present**.\n\n---\n\n## 1. Large-signal (DC) behavior\n\n**For $V_{in} < V_{TH}$:** M1 is off, $I_D = 0$, and $V_{out}=0$.\n\n**For $V_{in} > V_{TH}$:** M1 turns on, and its current flows through $R_S$, so $I_D = V_{out}/R_S$.\n\n**Saturation check:** M1 is saturated when $V_{DS}\\ge V_{GS}-V_{TH}$:\n\n$$V_{DD}-V_{out} \\ge V_{in}-V_{out}-V_{TH}\\;\\Longleftrightarrow\\; V_{in}\\le V_{DD}+V_{TH}$$\n\nSo M1 stays saturated over the whole input range up to $V_{DD}$.\n\n**Governing equation (square law):**\n\n$$\\frac12\\mu_nC_{ox}\\frac WL\\,(V_{in}-V_{TH}-V_{out})^2R_S = V_{out}$$\n\nThe threshold voltage depends on the output:\n\n$$V_{TH}=V_{TH0}+\\gamma\\left(\\sqrt{2\\Phi_F+V_{out}}-\\sqrt{2\\Phi_F}\\right)$$\n\nHence $V_{out}=V_{in}-V_{GS}$. The output \"follows\" the input, shifted down by the level shift\n\n$$V_{GS}=V_{TH}+\\sqrt{\\frac{2I_D}{\\mu_nC_{ox}W/L}}$$\n\n**Explicit solution, neglecting body effect** (with $K=\\mu_nC_{ox}W/L$):\n\n$$V_{out}=V_{in}-V_{TH}-\\frac{\\sqrt{1+2KR_S(V_{in}-V_{TH})}-1}{KR_S}$$\n\n**Shape of the transfer curve:**\n- $V_{out}$ is zero until $V_{in}=V_{TH}$.\n- It then rises with a slope that starts at 0.\n- Eventually it runs roughly parallel to, but below, the line $V_{out}=V_{in}$.\n\n---\n\n## 2. Small-signal voltage gain\n\n**From the large-signal equation:** differentiate with respect to $V_{in}$, using $\\partial V_{TH}/\\partial V_{in}=\\eta\\,\\partial V_{out}/\\partial V_{in}$ and $\\eta = g_{mb}/g_m$:\n\n$$\\frac{\\partial V_{out}}{\\partial V_{in}}=\\underbrace{\\mu_nC_{ox}\\tfrac WL(V_{in}-V_{TH}-V_{out})}_{g_m}R_S\\left[1-(1+\\eta)\\frac{\\partial V_{out}}{\\partial V_{in}}\\right]$$\n\nSolving for the derivative gives\n\n$$\\boxed{A_v=\\frac{g_mR_S}{1+(g_m+g_{mb})R_S}}$$\n\n**From the small-signal model:** with $v_{gs}=v_{in}-v_{out}$ and $v_{bs}=-v_{out}$, KCL at the source gives\n\n$$g_m(v_{in}-v_{out})-g_{mb}v_{out}=\\frac{v_{out}}{R_S}$$\n\nThis yields the same result.\n\n**Intuitive view:** the $g_{mb}$ source is controlled by the voltage across itself, so it acts as a resistor $1/g_{mb}$ from output to ground. The stage is then a voltage divider between $1/g_m$ and $R_S\\|1/g_{mb}$:\n\n$$A_v=\\frac{R_S\\|\\frac1{g_{mb}}}{R_S\\|\\frac1{g_{mb}}+\\frac1{g_m}}$$\n\n**Including channel-length modulation:**\n\n$$A_v=\\frac{g_m}{g_m+g_{mb}+1/R_S+1/r_O}$$\n\n**How the gain varies with $V_{in}$:**\n- **Near $V_{in}\\approx V_{TH}$:** $I_D\\approx 0$, so $g_m\\approx0$ and $A_v\\approx 0$.\n- **As $V_{in}$ rises:** $I_D$ and $g_mR_S$ grow, so $A_v$ increases.\n- **Upper limit ($g_mR_S\\gg1$):** $A_v\\to \\dfrac{g_m}{g_m+g_{mb}}=\\dfrac{1}{1+\\eta}$. Typically $\\eta\\approx0.1$–$0.3$, so the maximum gain is about 0.75–0.9.\n- **Without body effect:** $A_v = 1-1/\\sqrt{1+2KR_S(V_{in}-V_{TH})}\\to 1$.\n\n---\n\n## 3. Output resistance\n\nSet $v_{in}=0$ and apply a test voltage $v_X$ at the source. Then $v_{gs}=v_{bs}=-v_X$, and\n\n$$i_X=v_X\\left(\\frac1{R_S}+g_m+g_{mb}+\\frac1{r_O}\\right)$$\n\n$$R_{out}=R_S\\,\\|\\,\\frac{1}{g_m+g_{mb}}\\,\\|\\,r_O\\;\\approx\\;\\frac{1}{g_m+g_{mb}}$$\n\nThis output resistance is low, on the order of $1/g_m$. Here the body effect actually helps, because it lowers $R_{out}$.\n\n---\n\n## 4. Input impedance\n\n- **Low frequency:** $R_{in}\\to\\infty$, since the input is a gate.\n- **High frequency:** $C_{in}\\approx C_{GD}+(1-A_v)C_{GS}$. $C_{GS}$ is \"bootstrapped\" because the source follows the gate.\n\n---\n\n## 5. Assessment and limitations\n\n**Function:** a voltage buffer and level shifter, with high $R_{in}$, low $R_{out}$, and gain slightly below 1.\n\n**Nonlinearity has two causes:**\n1. $I_D=V_{out}/R_S$ changes with the signal, so $V_{GS}$ changes.\n2. $V_{TH}$ changes with $V_{out}$ (body effect), so the gain changes with signal level.\n\n**Headroom:** the output is shifted down by $V_{GS}$. For $V_{in}=V_{DD}$, the maximum output is $V_{out,max}=V_{DD}-V_{GS}$, which limits the swing available to following stages.\n\n**Remedies:**\n- Replace $R_S$ with a current source. This keeps $I_D$ constant and removes cause 1; the gain becomes about $g_m/(g_m+g_{mb})$.\n- Use a PMOS follower in its own n-well with bulk tied to source. This removes the body effect (cause 2).\n\n---\n\n## Summary\n\n| Quantity | Result |\n|---|---|\n| DC output | $V_{out}=V_{in}-V_{GS}$ (for $V_{in}>V_{TH}$) |\n| Voltage gain | $A_v=\\dfrac{g_mR_S}{1+(g_m+g_{mb})R_S}<1$ |\n| Maximum gain | $1/(1+\\eta)$ |\n| Input resistance | $\\infty$ |\n| Output resistance | $R_S\\,\\|\\,1/(g_m+g_{mb})\\,\\|\\,r_O$ |\n| Saturation condition | $V_{in}\\le V_{DD}+V_{TH}$ |",
        "format": "markdown",
        "sha256": "a00a3273b2d36933a71a0101553bd6f52aa0b81892d3b01ac2a61174b9a66587"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, sub-unity gain, including the valid body-effect refinement. The additional output-resistance result is also consistent with that model.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1266,
        "output_tokens": 14586,
        "total_tokens": 15852,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11946,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1266,
        "output_tokens": 14586,
        "total_tokens": 15852,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11946,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the NMOS Source Follower (Common‑Drain Stage)\n\n**Circuit:** The input drives the gate of M₁, and the output is taken at the source. The drain is tied to $V_{DD}$, so it is at AC ground. $R_S$ sets the bias current and is also the load. The bulk of M₁ is assumed to be at ground, so $V_{SB}=V_{out}$ and the **body effect** is present.\n\n---\n\n## 1. Large‑signal (DC) behavior\n\n- **$V_{in} < V_{TH}$:** M₁ is off, $I_D = 0$, and $V_{out}=0$.\n- **$V_{in} > V_{TH}$:** M₁ turns on, and it is always in saturation for $V_{in} \\le V_{DD}$:\n\n$$V_{DS}\\ge V_{GS}-V_{TH}\\;\\Leftrightarrow\\;V_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{TH}\\;\\Leftrightarrow\\;V_{in}\\le V_{DD}+V_{TH}$$\n\nThe input–output characteristic is therefore:\n\n$$\\tfrac12\\mu_nC_{ox}\\tfrac{W}{L}\\,(V_{in}-V_{TH}-V_{out})^2R_S=V_{out},\\qquad V_{TH}=V_{TH0}+\\gamma\\left(\\sqrt{2\\Phi_F+V_{out}}-\\sqrt{2\\Phi_F}\\right)$$\n\nIf we neglect the body effect and let $K=\\mu_nC_{ox}W/L$, this can be solved explicitly:\n\n$$V_{out}=(V_{in}-V_{TH})+\\frac{1}{KR_S}-\\sqrt{\\frac{2(V_{in}-V_{TH})}{KR_S}+\\frac{1}{(KR_S)^2}}$$\n\n**Interpretation:** $V_{out}=V_{in}-V_{GS}$. The output \"follows\" the input, shifted down by $V_{GS}=V_{TH}+\\sqrt{2I_D/K}$.\n\n- This level shift is **not constant**. $I_D=V_{out}/R_S$ rises with $V_{in}$, and $V_{TH}$ rises with $V_{out}$, so the transfer curve is nonlinear.\n- The output range is $0\\le V_{out}\\le V_{DD}-V_{GS}$.\n\n## 2. Small‑signal voltage gain\n\nIn the small‑signal model the drain is grounded, $v_{gs}=v_{in}-v_{out}$, and $v_{bs}=-v_{out}$. KCL at the source gives:\n\n$$g_m(v_{in}-v_{out})-g_{mb}v_{out}=\\frac{v_{out}}{R_S}$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_mR_S}{1+(g_m+g_{mb})R_S}}$$\n\nDifferentiating the large‑signal equation gives the same result. That route uses $\\partial V_{TH}/\\partial V_{in}=\\eta A_v$, where $\\eta=g_{mb}/g_m=\\gamma/\\left(2\\sqrt{2\\Phi_F+V_{SB}}\\right)$.\n\n**Including $r_o$:**\n\n$$A_v=\\frac{g_m}{g_m+g_{mb}+1/r_o+1/R_S}$$\n\n**Voltage‑divider view:** The $g_{mb}$ source is controlled by $v_{out}$ itself, so it behaves like a resistor $1/g_{mb}$ from the output to ground. The transistor then looks like a source $v_{in}$ with a series resistance $1/g_m$:\n\n$$A_v=\\frac{R_S\\,\\|\\,r_o\\,\\|\\,(1/g_{mb})}{R_S\\,\\|\\,r_o\\,\\|\\,(1/g_{mb})+1/g_m}$$\n\n**Gain versus $V_{in}$:**\n- At $V_{in}\\approx V_{TH}$, $g_m\\approx 0$, so $A_v\\approx 0$.\n- As $V_{in}$ increases, $I_D$ and $g_m$ increase, and $A_v$ rises monotonically.\n- For $g_mR_S\\gg1$ (or $R_S\\to\\infty$), $A_v\\to g_m/(g_m+g_{mb})=1/(1+\\eta)$. This is about 0.8 for $\\eta\\approx0.2$.\n- So **the gain stays below 1 even with an ideal current‑source load**, unless the bulk is tied to the source.\n- Without body effect, $A_v=\\dfrac{g_mR_S}{1+g_mR_S}=1-\\dfrac{1}{\\sqrt{1+2KR_S(V_{in}-V_{TH})}}$.\n\n## 3. Input impedance\n\nThe input is a gate, so $R_{in}\\to\\infty$ at low frequency. At high frequency, $C_{in}\\approx C_{GD}+(1-A_v)C_{GS}$, because $C_{GS}$ is bootstrapped by the follower action.\n\n## 4. Output impedance\n\nSet $v_{in}=0$ and apply $v_X$ at the output. Then $v_{gs}=v_{bs}=-v_X$, and:\n\n$$i_X=(g_m+g_{mb})v_X+\\frac{v_X}{r_o}+\\frac{v_X}{R_S}\\;\\Rightarrow\\;\nR_{out}=\\frac{1}{g_m+g_{mb}}\\,\\Big\\|\\,r_o\\,\\Big\\|\\,R_S\\approx\\frac{1}{g_m+g_{mb}}\\Big\\|R_S$$\n\n- $R_{out}$ is low, roughly $1/g_m$, which is why this stage works well as a buffer.\n- The body effect actually *lowers* $R_{out}$.\n- Note also that $A_v=g_mR_{out}$.\n\n## 5. Numerical illustration (assumed values)\n\nAssume $K=2\\ \\text{mA/V}^2$, $V_{TH}=0.5$ V, $R_S=2$ kΩ, $V_{in}=1.5$ V, and neglect body effect for the bias point.\n\n| Quantity | Result |\n|---|---|\n| $V_{out}$ | $1.25-\\sqrt{0.5625}=0.5$ V |\n| $I_D$ | 250 µA |\n| $V_{GS}$ | 1.0 V |\n| $g_m$ | 1 mS |\n| $A_v$ (no body effect) | $2/3\\approx0.67$ |\n| $A_v$ (with $\\eta=0.2$, $g_{mb}=0.2$ mS) | $2/3.4\\approx0.59$ |\n| $R_{out}$ (with $g_{mb}$) | ≈ 590 Ω |\n\nRaising $V_{in}$ to 2.0 V increases $I_D$ by about 70% (to 424 µA). $V_{GS}$ then changes by 0.15 V, and the incremental gain becomes about 0.72. This shows the nonlinearity directly.\n\n## 6. Summary\n\n**Function:** The stage is a voltage buffer and DC level shifter. It has very high input impedance, low output impedance (about $1/(g_m+g_{mb})$), and a gain slightly below 1. A typical use is after a high‑gain CS stage to drive a low‑impedance load.\n\n**Drawbacks:**\n1. **Gain below 1**, because of the body effect, finite $R_S$, and $r_o$.\n2. **Nonlinearity**, because $I_D$ (and hence $V_{GS}$) depends strongly on $V_{in}$ through $R_S$, and $V_{TH}$ varies with $V_{out}$.\n3. **Headroom loss**: the output is shifted down by $V_{GS}$, which limits swing in cascaded stages.\n\n**Remedies:**\n- Replace $R_S$ with a current source, so $I_D$ and $V_{GS}$ become roughly constant.\n- Remove the body effect by tying source to bulk: a PMOS in its own n‑well, or a triple‑well NMOS. The PMOS option costs lower mobility and therefore higher $R_{out}$.",
        "format": "markdown",
        "sha256": "c9f24d8079a43de9e2ea5f62033443162c8213b3f36874b5d101983cccf37d1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, sub-unity gain, including the no-body-effect form gmRS/(1+gmRS). The body-effect and output-resistance refinements are also appropriate.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1266,
        "output_tokens": 17565,
        "total_tokens": 18831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14757,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1266,
        "output_tokens": 17565,
        "total_tokens": 18831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14757,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Gate Stage with the Gate Tied to V_DD\n\n**Topology**\n- The gate is tied to V_DD, so it is an AC ground and also sets the DC bias.\n- The input drives the source, and the output is taken at the drain across R_D.\n- The NMOS body is at ground, so V_SB = V_in. The body effect is therefore present:\n  V_TH = V_TH0 + γ(√(2φ_F + V_in) − √(2φ_F)).\n- The stage is DC-coupled, so the V_in source must sink the bias current I_D.\n\n---\n\n## 1. Large-signal transfer characteristic\n\nStart with V_in near V_DD and lower it.\n\n**(a) M1 off: V_in ≥ V_DD − V_TH**\n\nHere V_GS = V_DD − V_in ≤ V_TH, so I_D = 0 and **V_out = V_DD**.\n\n**(b) Saturation**\n\nWhen V_in drops below V_DD − V_TH, M1 turns on. V_out is still about V_DD, which is above V_G − V_TH, so M1 starts in saturation:\n\n$$V_{out}=V_{DD}-\\tfrac12\\mu_nC_{ox}\\tfrac{W}{L}R_D\\,(V_{DD}-V_{in}-V_{TH})^2$$\n\nThe saturation condition simplifies neatly:\n\n$$V_{DS}\\ge V_{GS}-V_{TH}\\;\\Leftrightarrow\\;V_{out}\\ge V_{DD}-V_{TH}\\;\\Leftrightarrow\\;I_DR_D\\le V_{TH}$$\n\n**(c) Triode**\n\nM1 enters triode when I_D·R_D = V_TH. This happens at\n\n$$V_{in1}=V_{DD}-V_{TH}-\\sqrt{\\frac{2V_{TH}}{\\mu_nC_{ox}(W/L)R_D}}$$\n\nFor V_in < V_in1, the output satisfies\n\n$$V_{out}=V_{DD}-\\mu_nC_{ox}\\tfrac{W}{L}R_D\\Big[(V_{DD}-V_{in}-V_{TH})(V_{out}-V_{in})-\\tfrac12(V_{out}-V_{in})^2\\Big]$$\n\nDeep in triode, M1 behaves like a resistor R_on, giving V_out ≈ V_in + (V_DD − V_in)·R_on/(R_on + R_D). In other words, V_out follows V_in slightly above it.\n\n```\n      Vout\n        ^\nVDD     |                    _______________   M1 off\n        |                  .'\n        |                 /     saturation\nVDD-VTH |- - - - - - - - *      slope = (gm+gmb)RD\n        |              .':\n        |           .-'  :      triode\n        |       .-'      :\n        |   .-'          :\n        |.-'             :\n        +----------------+---+---------------> Vin\n        0              Vin1  VDD-VTH\n```\n\nThe slope in saturation is\n\n$$\\frac{\\partial V_{out}}{\\partial V_{in}}=\\mu_nC_{ox}\\tfrac{W}{L}(V_{DD}-V_{in}-V_{TH})\\left(1+\\tfrac{\\partial V_{TH}}{\\partial V_{in}}\\right)R_D=(g_m+g_{mb})R_D$$\n\nThe slope is positive, so the amplifier is non-inverting. It is steepest at the edge of triode.\n\n---\n\n## 2. Small-signal analysis (M1 saturated)\n\nWith gate and body at AC ground, v_gs = v_bs = −v_in. Writing KCL at the drain:\n\n$$-\\frac{v_{out}}{R_D}=-(g_m+g_{mb})v_{in}+\\frac{v_{out}-v_{in}}{r_O}$$\n\n**Voltage gain**\n\n$$A_v=\\frac{[1+(g_m+g_{mb})r_O]R_D}{r_O+R_D}\\;\\approx\\;(g_m+g_{mb})R_D=g_m(1+\\eta)R_D$$\n\nThis has the same magnitude as a common-source stage, with no sign inversion and a small boost from body effect.\n\n**Input resistance** (looking into the source)\n\n$$R_{in}=\\frac{r_O+R_D}{1+(g_m+g_{mb})r_O}\\approx\\frac{1}{g_m+g_{mb}}\\quad\\text{(low)}$$\n\n**Output resistance**\n- With an ideal input source: R_out = R_D ∥ r_O ≈ R_D.\n- With a source resistance R_S: R_out = R_D ∥ {r_O + [1 + (g_m + g_mb)r_O]R_S}, and A_v ≈ R_D / (R_S + 1/(g_m + g_mb)).\n\n---\n\n## 3. Consequence of tying the gate to V_DD: limited headroom\n\nSaturation requires V_out ≥ V_DD − V_TH, so the drop across R_D can be at most V_TH. Using g_m = 2I_D/V_ov:\n\n$$A_v=\\frac{2(1+\\eta)\\,I_DR_D}{V_{ov}}\\;\\le\\;\\frac{2(1+\\eta)V_{TH}}{V_{ov}}$$\n\nFor example, with V_TH = 0.5 V, V_ov = 0.2 V and η = 0.2, the gain is at most about 6. At that maximum bias the output has no room to swing downward.\n\n- The output must stay between V_DD − V_TH and V_DD.\n- The input DC level must be high: V_in = V_DD − V_TH − V_ov.\n\nFor these reasons, practical CG stages bias the gate at some V_b < V_DD, which lowers the minimum output to V_b − V_TH, or use a current-source load.\n\n---\n\n## 4. Frequency behavior (brief)\n\nBecause the gate is at AC ground, C_GD is not Miller-multiplied. It simply loads the output to ground.\n\n- Output pole: ω_out ≈ 1/[R_D(C_GD + C_DB + C_L)].\n- Input pole, when driven through R_S: ω_in ≈ (g_m + g_mb + 1/R_S)/(C_GS + C_SB).\n\nThe result is a broadband amplifier.\n\n---\n\n**Summary:** This is a non-inverting common-gate amplifier with:\n- gain ≈ (g_m + g_mb)R_D,\n- low input resistance ≈ 1/(g_m + g_mb),\n- output resistance ≈ R_D,\n- good bandwidth.\n\nWith the gate at V_DD, the drain can fall only V_TH below the supply before M1 enters triode. This severely limits both output swing and gain.",
        "format": "markdown",
        "sha256": "6685e0e8fb907a77d50be09c41615cf0f79f96889e045324bf6c27aa075746df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate stage and gives the non-inverting gain and low input resistance; the gmb terms are a valid body-effect refinement of the golden approximations.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 22801,
        "total_tokens": 24036,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 22801,
        "total_tokens": 24036,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Gate Stage with Gate Tied to V_DD\n\n## 1. What the circuit is\n\nM1 is an NMOS in a **common-gate (CG)** configuration:\n\n- The gate is tied to V_DD, so it is an AC ground.\n- The input drives the **source**.\n- The output is taken at the **drain**, across R_D.\n\nThe body is not drawn, so it is assumed to be at ground. That makes V_SB = V_in, so the body effect is present:\n\n$$V_{GS}=V_{DD}-V_{in},\\qquad V_{DS}=V_{out}-V_{in},\\qquad V_{TH}=V_{TH0}+\\gamma\\left(\\sqrt{2\\Phi_F+V_{in}}-\\sqrt{2\\Phi_F}\\right)$$\n\n---\n\n## 2. Large-signal behavior (V_in swept from V_DD down to 0)\n\n**(a) M1 off.** For V_in ≥ V_DD − V_TH, the device is cut off: I_D = 0 and V_out = V_DD.\n\n**(b) M1 in saturation.** M1 turns on once V_in drops below V_DD − V_TH. The saturation condition is:\n\n$$V_{DS}\\ge V_{GS}-V_{TH}\\;\\Longleftrightarrow\\; V_{out}\\ge V_{DD}-V_{TH}$$\n\nSo the drain may not fall more than one V_TH below the gate. At turn-on V_out = V_DD, so M1 starts out saturated:\n\n$$V_{out}=V_{DD}-\\tfrac12\\mu_nC_{ox}\\tfrac{W}{L}R_D\\,(V_{DD}-V_{in}-V_{TH})^2$$\n\n**(c) Edge of triode.** This occurs when V_out = V_DD − V_TH, which means I_D·R_D = V_TH:\n\n$$V_{in1}=V_{DD}-V_{TH}-\\sqrt{\\frac{2V_{TH}}{\\mu_nC_{ox}(W/L)R_D}}$$\n\nThis assumes R_D is large enough that V_in1 > 0. V_TH here is evaluated at V_SB = V_in, so the equation is implicit.\n\n**(d) M1 in triode (V_in < V_in1).**\n\n$$V_{out}=V_{DD}-\\mu_nC_{ox}\\tfrac WL R_D\\Big[(V_{DD}-V_{in}-V_{TH})(V_{out}-V_{in})-\\tfrac12(V_{out}-V_{in})^2\\Big]$$\n\nDeep in triode, M1 acts like a small resistor R_on. Then V_out ≈ V_in + (V_DD − V_in)·R_on/(R_on + R_D), so the output essentially follows the input. At V_in = 0, V_out = V_0 ≈ V_DD·R_on/(R_on + R_D).\n\n```\n          Vout\n            ^\n        VDD | . . . . . . . . . . . . . .  __.--+============\n            |                         _.-'      :\n            |                       .'          :   M1 off\n            |                     /  saturation :\n    VDD-VTH | . . . . . . . .   *               :\n            |               /   :               :\n            |            /      :               :\n            |        / triode   :               :\n            |     /             :               :\n         V0 | /                 :               :\n            |                   :               :\n            +-------------------+---------------+---------> Vin\n            0                 Vin1           VDD-VTH\n```\n\nThe slope in saturation is:\n\n$$\\frac{\\partial V_{out}}{\\partial V_{in}}=\\mu_nC_{ox}\\tfrac WL(V_{DD}-V_{in}-V_{TH})\\Big(1+\\tfrac{\\partial V_{TH}}{\\partial V_{in}}\\Big)R_D=(g_m+g_{mb})R_D$$\n\n- The slope is positive, so the stage is **non-inverting**.\n- It is zero at cutoff.\n- It is largest at the edge of triode.\n\n---\n\n## 3. Small-signal analysis (M1 saturated)\n\nThe gate and body are both AC grounds, so v_gs = v_bs = −v_in.\n\n**Voltage gain.** KCL at the drain gives −v_out/R_D = −(g_m + g_mb)v_in + (v_out − v_in)/r_o. Solving:\n\n$$A_v=\\frac{[1+(g_m+g_{mb})r_o]\\,R_D}{R_D+r_o}\\;\\xrightarrow{\\;\\lambda=0\\;}\\;(g_m+g_{mb})R_D=g_m(1+\\eta)R_D$$\n\n- Here η = g_mb/g_m.\n- The body effect *raises* the gain in a CG stage.\n- With a source resistance R_S driving the input (and λ = 0): A_v ≈ R_D / [R_S + 1/(g_m + g_mb)].\n\n**Input resistance (looking into the source).** This is low:\n\n$$R_{in}=\\frac{R_D+r_o}{1+(g_m+g_{mb})r_o}\\approx\\frac{1}{g_m+g_{mb}}$$\n\n**Output resistance.**\n\n$$R_{out}=R_D\\parallel\\{r_o+[1+(g_m+g_{mb})r_o]R_S\\}\\;\\xrightarrow{R_S=0}\\;R_D\\parallel r_o$$\n\n**Current gain** is about 1. The signal current entering the source reappears at the drain, so the stage acts as a current buffer: low R_in, high R_out.\n\n---\n\n## 4. The catch with tying the gate to V_DD: headroom\n\nSaturation requires V_out ≥ V_DD − V_TH, so the DC drop across R_D is at most V_TH. Using g_m = 2I_D/V_ov:\n\n$$A_v=(1+\\eta)\\,g_mR_D=\\frac{2(1+\\eta)\\,I_DR_D}{V_{ov}}\\;\\le\\;\\frac{2(1+\\eta)V_{TH}}{V_{ov}}$$\n\nEquivalently, the maximum gain at the edge of triode is A_v,max = (1+η)·√(2μ_nC_ox(W/L)·R_D·V_TH).\n\n- **Example:** with V_TH ≈ 0.5 V, V_ov = 0.2 V and η ≈ 0.2, A_v ≤ 6. Reaching this requires biasing right at the edge of triode, with zero swing margin.\n- **Output swing:** V_out is confined between V_DD − V_TH and V_DD. Biasing for symmetric swing (I_D·R_D ≈ V_TH/2) leaves only about ±V_TH/2 of swing, with A_v ≈ (1+η)V_TH/V_ov.\n- **Input bias:** the input must sit at a DC level of V_DD − V_TH − V_ov, which is fairly high. The input source must also sink the full bias current I_D.\n- **Remedy:** bias the gate at a lower voltage V_b < V_DD. The saturation condition then becomes V_out ≥ V_b − V_TH, allowing a larger drop across R_D.\n\n---\n\n## 5. Frequency behavior and uses\n\nThe gate is AC-grounded, so C_GD connects the output to ground and is **not Miller-multiplied**. The input and output nodes therefore have nearly independent poles:\n\n$$\\omega_{p,in}\\approx\\frac{1}{(C_{GS}+C_{SB})\\left(R_S\\parallel\\frac{1}{g_m+g_{mb}}\\right)},\\qquad \n\\omega_{p,out}\\approx\\frac{1}{R_D\\,(C_{GD}+C_{DB}+C_L)}$$\n\nThis makes the CG stage wideband. It is used where a low input impedance is needed, such as 50-Ω termination by setting 1/(g_m + g_mb) = 50 Ω. It is also used as a current buffer or cascode device.\n\n---\n\n**Bottom line:** this is a non-inverting CG amplifier with gain ≈ (g_m + g_mb)R_D, input resistance ≈ 1/(g_m + g_mb), and output resistance ≈ R_D ∥ r_o. Because the gate sits at V_DD, the drain can drop only about V_TH below the supply. That limits both the gain (≤ 2(1+η)V_TH/V_ov) and the output swing (< V_TH).",
        "format": "markdown",
        "sha256": "6472a3d078dd81d681fcc4840bfecc634bfc84ba9ab4a68929e4a391154a3254"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology, source input, non-inverting gain, and low input resistance. Its g_m+g_mb refinements are compatible with its stated grounded-body assumption and do not undermine the essential result.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 42654,
        "total_tokens": 43889,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39831,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 42654,
        "total_tokens": 43889,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39831,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Common-Gate Stage with Gate Tied to V_DD\n\n## What the circuit is\n\nM1 is an NMOS transistor. The input drives its **source**, the output is taken at its **drain** (load R_D), and its **gate is tied to V_DD**. This makes it a **common-gate (CG) amplifier**. V_DD sets the gate bias and also makes the gate an AC ground.\n\nTwo side effects of this connection:\n\n- **Body effect.** The bulk is at ground, so V_SB = V_in:\n$$V_{TH}=V_{TH0}+\\gamma\\left(\\sqrt{2\\Phi_F+V_{in}}-\\sqrt{2\\Phi_F}\\right),\\qquad \\eta=\\frac{\\partial V_{TH}}{\\partial V_{SB}}=\\frac{g_{mb}}{g_m}$$\n- **Input current.** M1's bias current flows through the input source.\n\nTwo relations govern the circuit:\n\n$$V_{GS}=V_{DD}-V_{in},\\qquad V_{GD}=V_{DD}-V_{out}=I_DR_D$$\n\nSo M1 is saturated only while V_GD ≤ V_TH:\n\n$$I_DR_D\\le V_{TH}\\iff V_{out}\\ge V_{DD}-V_{TH}$$\n\n---\n\n## 1. Large-signal behavior (λ = 0, β = μₙCₒₓW/L)\n\nLet V_in fall from V_DD toward 0.\n\n**(a) M1 off, V_in ≥ V_DD − V_TH:** I_D = 0 and V_out = V_DD. Because V_TH rises with V_in, the turn-on point lies somewhat below V_DD − V_TH0.\n\n**(b) Saturation:**\n$$I_D=\\tfrac{\\beta}{2}(V_{DD}-V_{in}-V_{TH})^2,\\qquad V_{out}=V_{DD}-\\tfrac{\\beta}{2}R_D(V_{DD}-V_{in}-V_{TH})^2$$\n\nThis holds until the drop across R_D reaches V_TH, at which point V_out = V_DD − V_TH:\n$$V_{in1}=V_{DD}-V_{TH}-\\sqrt{\\frac{2V_{TH}}{\\beta R_D}}$$\n\n**(c) Triode, V_in < V_in1:** The device equation is\n$$I_D=\\beta\\left[V_{ov}(V_{out}-V_{in})-\\tfrac12(V_{out}-V_{in})^2\\right],\\quad V_{ov}=V_{DD}-V_{in}-V_{TH}$$\ntogether with V_out = V_DD − I_D R_D. Solving these gives\n$$V_{out}=V_{in}+\\frac{1+\\beta R_DV_{ov}-\\sqrt{1+(\\beta R_DV_{ov})^2-2\\beta R_DV_{TH}}}{\\beta R_D}$$\n\nNear V_in = 0, M1 is in deep triode and acts like a closed switch with R_on = 1/(βV_ov):\n$$V_{out}\\approx V_{in}+(V_{DD}-V_{in})\\frac{R_{on}}{R_{on}+R_D},\\qquad V_{out}(0)\\approx V_{DD}\\frac{R_{on}}{R_{on}+R_D}$$\n\nIf ½βR_D(V_DD − V_TH0)² < V_TH0, M1 stays saturated all the way down to V_in = 0, and region (c) does not occur.\n\n```\n        Vout\n         ^\n    VDD  |- - - - - - - - - - - - - -o================  M1 off\n         |                        /\n         |                     /  saturation\nVDD-VTH  |- - - - - - - - - -*   <- sat/triode edge: max gain\n         |                 / :\n         |              /    :\n         | triode   /        :\n         |     /             :\nVout(0)  |/                  :\n         +-------------------+-------+------> Vin\n         0                 Vin1   VDD-VTH\n```\n\nThe characteristic is **non-inverting**:\n- At low V_in the slope is about 1, because M1 simply passes V_in to the output.\n- The slope peaks at the saturation/triode edge, where it equals (1+η)√(2βR_D V_TH).\n- It then falls to zero as M1 cuts off.\n\n---\n\n## 2. Small-signal behavior (M1 saturated)\n\nDifferentiating the saturation expression gives\n$$A_v=\\frac{\\partial V_{out}}{\\partial V_{in}}=\\beta R_D(V_{DD}-V_{in}-V_{TH})(1+\\eta)=(g_m+g_{mb})R_D$$\n\nThe gain is positive, and the body effect increases it.\n\nIncluding r_o, and a source resistance R_S for the input driver if present:\n\n$$A_v=\\frac{[1+(g_m+g_{mb})r_o]R_D}{r_o+R_D+R_S+(g_m+g_{mb})r_oR_S}\\quad\\left(R_S=0:\\ \\frac{[1+(g_m+g_{mb})r_o]R_D}{r_o+R_D}\\right)$$\n\n$$R_{in}=\\frac{r_o+R_D}{1+(g_m+g_{mb})r_o}\\approx\\frac{1}{g_m+g_{mb}}\\quad\\text{(low)}$$\n\n$$R_{out}=R_D\\parallel\\{[1+(g_m+g_{mb})r_o]R_S+r_o\\}\\quad(R_S=0:\\ R_D\\parallel r_o)$$\n\n- **Current buffer:** the current gain is about 1, with low R_in and high R_out.\n- **Frequency response:** with the gate at AC ground, C_GD is not Miller-multiplied.\n  - Input pole: 1/[(C_GS + C_SB)(R_S ∥ 1/(g_m + g_mb))]. It vanishes for an ideal input source.\n  - Output pole: 1/[(C_GD + C_DB + C_L)(R_D ∥ r_o)].\n\n---\n\n## 3. Consequences of tying the gate to V_DD\n\n- **Headroom:** for saturation, V_out is confined to [V_DD − V_TH, V_DD]. The DC drop across R_D and the signal swing must share a single V_TH.\n- **Gain ceiling:**\n$$A_v=(1+\\eta)\\frac{2I_DR_D}{V_{ov}}\\le\\frac{2(1+\\eta)V_{TH}}{V_{ov}}$$\n  For example, V_TH ≈ 0.5 V, V_ov = 0.2 V and η ≈ 0.2 give A_v ≤ 6, and reaching that limit leaves no output swing.\n- **Input bias:** the input DC level must be V_DD − V_TH − V_ov, which is close to V_DD. The driver must also sink I_D.\n- **Remedy:** bias the gate at V_b < V_DD. The allowed drop across R_D then becomes V_DD − V_b + V_TH, at the cost of a lower input level.\n\n**Numerical illustration** (β = 1 mA/V², R_D = 10 kΩ, V_DD = 1.8 V, V_TH = 0.5 V, body effect ignored):\n\n| Region | V_in range | V_out |\n|---|---|---|\n| M1 off | V_in > 1.3 V | 1.8 V |\n| Saturation | 0.98 V < V_in < 1.3 V | 1.3 V to 1.8 V |\n| Triode | V_in < 0.98 V | down to ≈ 0.14 V at V_in = 0 |\n\nThe peak gain is √10 ≈ 3.2.",
        "format": "markdown",
        "sha256": "637053fbd832b634cf57d465d6e6c384030b5e4acbd19f8430a43a817ff981ec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology, the AC-grounded gate, positive gain, and low input resistance. The added body-effect and finite-ro details are consistent with the central result.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 43715,
        "total_tokens": 44950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 43715,
        "total_tokens": 44950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Gate Stage with a Grounded Source\n\n## Topology\n\nM₁ is an NMOS in a **common-gate (CG)** configuration:\n\n- The gate is held at the DC bias V_b, so it is at AC ground.\n- R_D is the drain load, and the output is taken at the drain.\n- The input is meant to drive the **source** through the coupling capacitor C₁.\n\n## The flaw: the source is tied directly to ground\n\nThe wire from the source node to ground gives the drain current a DC path. It also **shorts the input signal to ground**.\n\n### DC operating point\n\n- V_S = 0, so V_GS = V_b and V_SB = 0 (no body effect).\n- I_D = ½ μₙC_ox (W/L)(V_b − V_TH)² (neglecting λ).\n- V_out = V_DD − R_D·I_D.\n- M₁ is in saturation if V_DD − R_D·I_D ≥ V_b − V_TH.\n- C₁ blocks DC, so V_in does not affect the bias. C₁ simply charges to the DC level of V_in.\n\n### Small-signal analysis\n\nSet V_b and V_DD to AC ground, and treat C₁ as a short at signal frequencies.\n\n- The source node is hard-wired to ground, so **v_s = 0 regardless of v_in**.\n- Therefore v_gs = v_g − v_s = 0 − 0 = 0. The controlled sources g_m·v_gs and g_mb·v_bs are both zero.\n- KCL at the drain gives v_out(1/R_D + 1/r_o) = 0, so v_out = 0.\n\n$$\nA_v=\\frac{v_{out}}{v_{in}} = 0\n$$\n\nThe input source sees only C₁ to ground, so Z_in = 1/(sC₁). The current sC₁·v_in flows straight into ground, and none of it reaches M₁. Put differently, the CG stage's input resistance (≈1/g_m) is in parallel with a 0-Ω short.\n\n**Conclusion:** the circuit does not amplify. M₁ is just a constant-current sink, and V_out sits at the fixed DC value V_DD − I_D·R_D.\n\n## Fixing the circuit\n\nReplace the short with an element that carries the DC bias current but presents a high impedance to the signal. This can be a resistor R_S (or a current source) from the source to ground, with C₁ still coupling V_in to the source.\n\n**Bias:**\n\n- I_D = ½ μₙC_ox (W/L)(V_b − I_D·R_S − V_TH)²\n- Saturation requires V_DD − I_D·R_D ≥ V_b − V_TH.\n\n**Small-signal (λ = γ = 0, C₁ ≈ short):**\n\n- Input resistance: R_in = R_S ∥ (1/g_m)\n- Gain with an ideal V_in: A_v = +g_m·R_D. It is non-inverting: raising v_in lowers V_GS, which lowers I_D, so V_out rises.\n- With a source resistance R_sig:\n\n$$\nA_v = g_mR_D\\cdot\\frac{R_S\\parallel(1/g_m)}{R_{sig}+R_S\\parallel(1/g_m)}\n$$\n\n  To avoid losing signal, choose R_S ≫ 1/g_m. A current source works even better here.\n- Output resistance: R_out ≈ R_D.\n- C₁ creates a low-frequency high-pass corner at ω ≈ 1/[C₁(R_sig + R_S∥1/g_m)]. C₁ must be large enough to look like a short at the lowest frequency of interest.",
        "format": "markdown",
        "sha256": "df941ed3eebf8e94f4f8cf6ce991f09b93637e7e36a65af8784322769fd3fad4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input produces no source signal and the ideal small-signal voltage gain is zero, as required for full credit.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 9897,
        "total_tokens": 11803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8686,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 9897,
        "total_tokens": 11803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8686,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Circuit\n\n## Intended topology\n\nThis is meant to be a **common-gate (CG) amplifier**:\n- The gate is held at the DC voltage $V_b$.\n- The input $V_{in}$ is capacitively coupled through $C_1$ to the source of $M_1$.\n- The output is taken at the drain, across $R_D$.\n\nThe **source of $M_1$ is wired directly to ground**, and this causes the circuit to fail.\n\n---\n\n## 1. DC (bias) analysis — $C_1$ is an open circuit\n\nWith the source at 0 V and the gate at $V_b$:\n\n$$V_{GS}=V_b,\\qquad I_D=\\tfrac12\\mu_nC_{ox}\\tfrac{W}{L}(V_b-V_{TH})^2$$\n\n$$V_{out}=V_{DD}-R_D I_D$$\n\nFor saturation, $V_{DS}\\ge V_{GS}-V_{TH}$:\n\n$$V_{DD}-R_D I_D \\ge V_b - V_{TH}$$\n\nThe bias point is well defined. Nothing is wrong at DC.\n\n---\n\n## 2. Small-signal analysis — $C_1$ is a short, $V_{DD}$ and $V_b$ are AC ground\n\n- The source node is tied to ground, so $v_s = 0$ regardless of $v_{in}$. The node has zero impedance to ground.\n- The current from $V_{in}$ flows through $C_1$ straight into ground. None of it enters $M_1$.\n- The gate is at AC ground ($v_g=0$), so $v_{gs}=0$. Also $v_{bs}=0$, so there is no body effect.\n- KCL at the drain gives $v_{out}/R_D + v_{out}/r_o = 0$, so $v_{out}=0$.\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=0}$$\n\nPhysically, $M_1$'s current can change only if $V_{GS}$ or $V_{DS}$ changes. Here $V_G$ is fixed by $V_b$ and $V_S$ is pinned at 0 V. So $I_D$ is constant and $V_{out}$ is constant.\n\nFrom $V_{in}$'s point of view, the whole circuit is just $C_1$ to ground. The output resistance, $R_D\\parallel r_o$, is irrelevant because no signal reaches the output.\n\n**Conclusion:** grounding the source sets the bias but **shorts the input signal to ground**. The stage has zero gain.\n\n---\n\n## 3. The fix\n\nThe source needs a DC path to ground that is **not** an AC short. Use a resistor $R_S$ or, better, a current source $I_1$ from source to ground.\n\nWith $R_S$ (and $\\lambda=0$):\n\n**Bias:**\n$$I_D=\\tfrac12\\mu_nC_{ox}\\tfrac{W}{L}(V_b-I_DR_S-V_{TH})^2$$\n$V_b$ must be raised by $I_DR_S$ to keep the same current.\n\n**Input resistance:**\n$$R_{in}=R_S\\parallel\\frac{1}{g_m+g_{mb}}$$\n\n**Gain with an ideal $V_{in}$:** the gain is non-inverting.\n$$A_v=(g_m+g_{mb})R_D$$\n\n**Gain with a source resistance $R_{sig}$** (body effect neglected):\n$$A_v=\\frac{R_S\\parallel(1/g_m)}{R_S\\parallel(1/g_m)+R_{sig}}\\;g_mR_D$$\n\nTo avoid attenuating the signal, choose $R_S \\gg 1/g_m$, or replace $R_S$ with a current source. Then all the signal current flows into $M_1$, and $R_{in}\\approx 1/g_m$.\n\n**Low-frequency corner set by $C_1$:**\n$$\\omega_L \\approx \\frac{1}{(R_{sig}+R_{in})\\,C_1}$$",
        "format": "markdown",
        "sha256": "41ff5b652772e60b6cf3d6f93ce33f28d1051477f171814f9d65b4f666df0afe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the source-to-ground short and correctly concludes that the input signal is shunted, giving ideally zero voltage gain. The additional discussion does not undermine that essential conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 7967,
        "total_tokens": 9873,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6625,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 7967,
        "total_tokens": 9873,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6625,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Grounded-Source Common-Gate Stage\n\n## What the circuit is meant to be\n\nThis is a common-gate (CG) stage:\n- The input is coupled through C₁ into the source of M₁.\n- The gate is held at a fixed bias V_b.\n- The output is taken at the drain, across R_D.\n\nThe source node, however, is also wired directly to ground.\n\n## DC (bias) analysis — C₁ open\n\nThe source sits at V_S = 0, so V_GS = V_b and\n\n$$I_D=\\tfrac12\\mu_nC_{ox}\\frac{W}{L}(V_b-V_{TH})^2 ,\\qquad V_{out,DC}=V_{DD}-R_DI_D$$\n\nM₁ stays in saturation if V_DD − R_D·I_D ≥ V_b − V_TH. The bias point is therefore fine. M₁ simply acts as a constant current sink.\n\n## Small-signal analysis — C₁ shorted, V_DD and V_b at AC ground\n\n- The source node is tied to ground by a wire, so **v_s = 0 no matter what v_in is**.\n- Hence v_gs = 0 (and v_bs = 0), so g_m·v_gs = 0 and no signal current flows in M₁.\n- The output node sees only R_D ∥ r_O, with nothing driving it, so v_out = 0.\n\n$$A_v=\\frac{v_{out}}{v_{in}}=0$$\n\nAll V_in does is push a current sC₁·v_in through C₁ straight into ground. The input impedance it sees is just 1/(sC₁) to ground.\n\n## Conclusion\n\nThe circuit does not amplify. The input signal is shorted to ground.\n\nThe ground connection was presumably added because, with only C₁ at the source, M₁'s bias current would have no DC path. The source would float up until V_GS ≈ V_TH, and M₁ would turn off. A short circuit gives a bias path, but it also kills the signal.\n\n## The fix\n\nReplace the wire with a resistor R_S or a current source I₁ from source to ground. The bias current then has a path, and the source can still move with v_in.\n\n**Bias:** V_b = V_GS + I_D·R_S, with V_out ≥ V_b − V_TH.\n\n**Gain**, assuming λ = 0, an ideal input source and a large C₁:\n\n$$A_v = g_mR_D \\quad (\\text{or } (g_m+g_{mb})R_D \\text{ with body effect})$$\n\n**Gain with source resistance:** if the signal source has resistance R_sig,\n\n$$A_v=\\frac{R_S\\parallel \\frac{1}{g_m}}{R_S\\parallel\\frac{1}{g_m}+R_{sig}}\\;g_mR_D$$\n\n**Input impedance:** R_in = R_S ∥ (1/g_m), or 1/g_m with an ideal current source.",
        "format": "markdown",
        "sha256": "51c8a14851a7905a4fb878d1a852f90e67aee2a13ded0aa956d65af5679dbe32"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input signal is shunted and the ideal voltage gain is zero. The extra repair discussion does not contradict this conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 9281,
        "total_tokens": 11187,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8321,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1906,
        "output_tokens": 9281,
        "total_tokens": 11187,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8321,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The circuit has two poles.**\n\nThe number of poles equals the number of capacitors whose voltages can be set independently, i.e., the number of state variables. Of the four capacitors:\n\n1. **C_SB contributes nothing.** The source is tied directly to ground, so both terminals of C_SB are grounded. It never charges and carries no signal.\n\n2. **C_GS, C_GD, and C_DB form a loop of capacitors** (gate → ground → drain → gate). Their voltages are not independent:\n   V_GD = V_GS − V_DB\n   Only two of the three voltages can be chosen freely.\n\nSo there are 2 independent state variables, and the circuit is second order.\n\n**Check with nodal analysis.** Writing KCL at the gate node X and at the output node gives:\n\n$$\n\\frac{V_{out}}{V_{in}}=\\frac{(C_{GD}s-g_m)R_D}{R_SR_D\\,\\xi\\, s^2+\\left[R_S(1+g_mR_D)C_{GD}+R_SC_{GS}+R_D(C_{GD}+C_{DB})\\right]s+1}\n$$\n\nwhere ξ = C_GS·C_GD + C_GS·C_DB + C_GD·C_DB.\n\nThe denominator is second order, which confirms two poles. There is also a right-half-plane zero at g_m/C_GD.",
        "format": "markdown",
        "sha256": "4cd43a1f66f2bcb888acc03c7bdba03aa35c5060a8ca417c2e3f5ba03b61b0ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count by noting that C_SB is shorted out and the other three capacitor voltages are constrained by a loop, leaving two independent state variables. The second-order denominator confirms the result.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2128,
        "output_tokens": 1652,
        "total_tokens": 3780,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1202,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2128,
        "output_tokens": 1652,
        "total_tokens": 3780,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1202,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# The circuit has two poles\n\nThe number of poles equals the number of capacitors whose voltages can be set independently (the independent initial conditions). The circuit shows four capacitors, but only two count.\n\n**1. C_SB contributes nothing.** The source of M₁ is tied directly to ground, so both terminals of C_SB are grounded. It is shorted, never charges, and produces no pole.\n\n**2. C_GS, C_GD and C_DB form a loop of capacitors only.** The loop runs gate → C_GD → drain → C_DB → ground → C_GS → gate. Their voltages are therefore not independent:\n\n$$V_{GD} = V_{GS} - V_{DS}$$\n\nOnce two of these voltages are known, the third is fixed. So these three capacitors give only two independent states.\n\n**3. Total:** 4 capacitors − 1 (shorted C_SB) − 1 (capacitor loop) = **2 poles**.\n\n**Check with the transfer function.** Writing KCL at the gate and output nodes, and neglecting channel-length modulation, gives:\n\n$$\\frac{V_{out}}{V_{in}}=\\frac{(C_{GD}s-g_m)R_D}{R_SR_D\\,\\xi\\, s^2+\\left[R_S(1+g_mR_D)C_{GD}+R_SC_{GS}+R_D(C_{GD}+C_{DB})\\right]s+1}$$\n\nwhere\n\n$$\\xi = C_{GS}C_{GD}+C_{GS}C_{DB}+C_{GD}C_{DB}$$\n\nThe denominator is second order, confirming two poles. There is also one zero, in the right half-plane at $s = g_m/C_{GD}$.",
        "format": "markdown",
        "sha256": "46833d46924f3bcab5b9395ea56ff6c77a7974daa01c205fa0f4ebc89d34386e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that C_SB is shorted to ground and that C_GS, C_GD, and C_DB have only two independent voltages; the stated second-order denominator confirms two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2128,
        "output_tokens": 3648,
        "total_tokens": 5776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2128,
        "output_tokens": 3648,
        "total_tokens": 5776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Answer: two poles\n\nThe circuit has four capacitors, but only two are independent energy-storage elements.\n\n1. **C_SB contributes nothing.** The source of M₁ is tied directly to ground, so both terminals of C_SB are at ground. It never charges.\n\n2. **C_GS, C_GD and C_DB form a loop.** The loop runs ground → C_GS → gate → C_GD → drain → C_DB → ground. Around a loop of capacitors, the voltages are not independent:\n\n   V_CGD = V_GS − V_DS\n\n   So the three capacitors provide only two independent state variables.\n\nThe order of the network is therefore 2.\n\n## Check with the transfer function\n\nWriting KCL at the gate (X) and the drain (out):\n\n- (V_in − V_X)/R_S = sC_GS·V_X + sC_GD(V_X − V_out)\n- sC_GD(V_X − V_out) = g_m·V_X + V_out/R_D + sC_DB·V_out\n\nSolving gives:\n\n$$\n\\frac{V_{out}}{V_{in}}=\\frac{(C_{GD}s-g_m)R_D}{R_SR_D\\,\\xi\\, s^2+\\left[R_S(1+g_mR_D)C_{GD}+R_SC_{GS}+R_D(C_{GD}+C_{DB})\\right]s+1}\n$$\n\nwhere ξ = C_GS·C_GD + C_GS·C_DB + C_GD·C_DB.\n\nThe denominator is second-order, so there are **two poles**. There is also one right-half-plane zero at s = g_m/C_GD.",
        "format": "markdown",
        "sha256": "2f5fdf2c0626523a495f8d42b7d550baf958a7f183ff5c50fc0728d489f262a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that C_SB is shorted out and the other three capacitors have only two independent voltages. The second-order denominator independently confirms two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2128,
        "output_tokens": 2765,
        "total_tokens": 4893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2232,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2128,
        "output_tokens": 2765,
        "total_tokens": 4893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2232,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of a Common-Gate Stage with Resistive-Divider Feedback\n\n## 1. What the circuit is\n\nM1 is a **common-gate (CG) stage**: the input is at the source, the output is at the drain, and RD is the load. The gate is not held at a fixed bias. It is driven by a fraction of the output:\n\n$$V_F=\\beta V_{out},\\qquad \\beta=\\frac{R_2}{R_1+R_2}$$\n\n**Feedback polarity:**\n- Forward path: V_in↑ → V_GS↓ → I_D↓ → V_out↑. The source-to-drain path is non-inverting.\n- Return path: V_out↑ → V_F↑ → I_D↑ → V_out↓. So the feedback is **negative**.\n\n**Useful picture:** treat M1 as a one-transistor \"op amp.\"\n- The source is the non-inverting input and the gate is the inverting input.\n- The open-loop gain is g_m R_L.\n- The divider is the feedback network, so the circuit is a transistor-level **non-inverting amplifier**.\n- The output voltage is sensed, and a voltage is returned in series with the input (V_GS = V_F − V_in). This is voltage–voltage (series–shunt) feedback.\n- Therefore the gain and R_out are divided by (1+T), and R_in is multiplied by (1+T), where T is the loop gain.\n\n## 2. Bias (large-signal)\n\nThe gate draws no current, so KVL gives V_F = V_in + V_GS1. Exactly:\n\n$$V_{out}=\\left(1+\\frac{R_1}{R_2}\\right)(V_{in}+V_{GS1}),\\qquad I_D=\\frac{V_{DD}-V_{out}}{R_D}-\\frac{V_{out}}{R_1+R_2}$$\n\n- **M1 is always saturated.** V_G = βV_out < V_D = V_out, so V_DS > V_GS − V_TH automatically.\n- **Headroom limits the gain.** The DC output equals (1+R₁/R₂)(V_in+V_GS). With a DC-coupled divider, headroom therefore caps the closed-loop gain (roughly V_DD/V_GS when V_in ≈ 0).\n- **DC path at the input.** The input source must sink the bias current I_D.\n\n## 3. Small-signal behavior (λ = 0, no body effect)\n\nDefine:\n\n$$R_L = R_D\\,\\|\\,(R_1+R_2),\\qquad T=\\beta g_m R_L=\\frac{g_mR_DR_2}{R_D+R_1+R_2}$$\n\nT is the loop gain, found by breaking the loop at the gate.\n\nWriting KCL at the output node:\n\n$$\\frac{v_{out}}{R_L}+g_m(\\beta v_{out}-v_{in})=0$$\n\n**Voltage gain**\n\n$$A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_mR_L}{1+T}=\\frac{g_mR_D(R_1+R_2)}{R_D+R_1+R_2+g_mR_DR_2}\\;\\xrightarrow{T\\gg1}\\;1+\\frac{R_1}{R_2}$$\n\n**Input resistance**\n\nAll of the input current flows through M1 into R_L, so v_out = i_in R_L. This gives R_in = R_L/A_v:\n\n$$R_{in}=\\frac{1+T}{g_m}=\\frac{1}{g_m}+\\frac{R_DR_2}{R_D+R_1+R_2}$$\n\nIntuition: the gate now \"bootstraps\" the source. Since v_F = [T/(1+T)]·v_in, we get v_gs = −v_in/(1+T). The current drawn from the input therefore drops by (1+T).\n\n**Output resistance (ideal input source)**\n\nWith v_in = 0, M1 sees βv_X at its gate, so it looks like 1/(βg_m) to ground:\n\n$$R_{out}=\\frac{R_L}{1+T}=R_D\\,\\|\\,(R_1+R_2)\\,\\|\\,\\frac{1+R_1/R_2}{g_m}$$\n\n**With a source resistance R_S**\n\n$$\\frac{v_{out}}{v_s}=\\frac{R_L}{R_S+R_{in}}=\\frac{g_mR_L}{1+T+g_mR_S}$$\n\n**Sanity checks**\n- R₂ → 0 (β = 0): this is an ordinary CG stage, with A_v = g_m(R_D‖R₁) and R_in = 1/g_m.\n- R₁ → 0 (β = 1): M1 becomes a diode-connected level shifter, with A_v ≈ 1 and R_in = 1/g_m + R_L.\n\n**Including channel-length modulation (r_o) and body effect (g_mb)**\n\n$$A_v=\\frac{[1+(g_m+g_{mb})r_o]R_L}{R_L+r_o(1+T)},\\qquad R_{in}=\\frac{R_L}{A_v}$$\n\n## 4. Summary\n\n| | Plain CG (gate at ac ground) | With divider feedback |\n|---|---|---|\n| Gain | g_m R_L | g_m R_L/(1+T) → 1+R₁/R₂ |\n| R_in | 1/g_m | (1+T)/g_m |\n| R_out | R_L | R_L/(1+T) |\n\n## 5. Why use it (e.g., as a CG LNA)\n\n**Matching without g_m = 1/R_S.** A plain CG stage needs g_m = 1/R_S for input matching, which gives NF ≥ 1 + γ + 4R_S/R_D (γ is the channel thermal-noise coefficient). Here, R_in = (1+T)/g_m = R_S allows g_m = (1+T)/R_S.\n\n**Gain is unchanged.** The matched gain is still v_out/v_in = R_L/R_S.\n\n**Noise figure.** Under matching:\n\n$$NF\\approx1+\\frac{\\gamma}{1+T}+\\frac{R_S}{R_L}\\left(\\frac{2+T}{1+T}\\right)^2+\\frac{R_1\\|R_2}{R_S}$$\n\n- M1's contribution falls by (1+T).\n- The load term falls toward R_S/R_L.\n\n**Catch: the divider's own noise.** The divider's noise appears directly in series with the input. It needs R₁‖R₂ ≪ R_S, which conflicts with needing R₁+R₂ ≫ R_D. This, plus the DC headroom issue, is why a capacitive divider with a separate gate bias is preferred in practice.\n\n**Frequency response.** The loop has two poles: one at the output node and one at the gate node (R₁‖R₂ with C_GS and C_GD). It is stable, but may peak at large T.",
        "format": "markdown",
        "sha256": "24f7f87829690af759aff4ca6be1bc81357e5dd35b807b1dbbbfed3c15e1f030"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies the source input, output-divider feedback to the gate, and negative feedback, and gives the correct closed-loop gain. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1774,
        "output_tokens": 29648,
        "total_tokens": 31422,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27352,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1774,
        "output_tokens": 29648,
        "total_tokens": 31422,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27352,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Gate Stage with Output-to-Gate Feedback\n\n## 1. Topology\n\n- **M1 is a common-gate (CG) stage.** The input drives the source, the output is taken at the drain, and R_D is the load.\n- The gate is not held at a fixed bias. It is driven from the output through the R₁–R₂ divider. Because the gate draws no current:\n\n$$V_F=\\beta V_{out},\\qquad \\beta=\\frac{R_2}{R_1+R_2}$$\n\n- **Feedback type: series–shunt (voltage–voltage).**\n  - The divider sits across the output, so it senses V_out (shunt sensing).\n  - The returned voltage is subtracted from the input in the gate–source loop, $V_{GS}=V_F-V_{in}$ (series mixing).\n- **Polarity:** V_in↑ → V_GS↓ → I_D↓ → V_out↑ → V_F↑ → V_GS↑. The loop opposes the original change, so this is **negative feedback**.\n\n**Op-amp analogy:** for M1, the source acts as a non-inverting input and the gate as an inverting input. Feeding βV_out back to the inverting input is the classic non-inverting amplifier. So we expect $V_{out}/V_{in}\\to 1+R_1/R_2$.\n\n## 2. DC operating point\n\nSeen from the drain, replace V_DD, R_D and (R₁+R₂) by a Thevenin equivalent:\n\n$$V_{Th}=V_{DD}\\frac{R_1+R_2}{R_D+R_1+R_2},\\qquad R_L=R_D\\parallel(R_1+R_2)$$\n\n$$V_{out}=V_{Th}-R_LI_D,\\qquad V_{GS}=(\\beta V_{Th}-V_{in})-\\beta R_L I_D$$\n\nThis is equivalent to a transistor with its gate at βV_Th and a degeneration resistor βR_L in its source. Combined with the square law, it gives a quadratic for the overdrive voltage.\n\nTwo useful consequences:\n\n- **M1 can never enter triode.** The gate is always below the drain ($V_G=\\beta V_{out}<V_{out}$), so $V_{DS}-(V_{GS}-V_{TH})=V_{out}R_1/(R_1+R_2)+V_{TH}>0$. M1 is either saturated or off.\n- **M1 turns off** for $V_{in}\\ge \\beta V_{Th}-V_{TH}$. Then V_out = V_Th, its maximum.\n\nThe same loop also stabilizes the bias: if I_D rises, V_out falls, V_GS falls, and I_D is pulled back.\n\n## 3. Small-signal analysis (λ = γ = 0)\n\nThe drain current is:\n\n$$i_d=g_m(\\beta v_{out}-v_{in})$$\n\nKCL at the drain gives:\n\n$$i_d=-\\frac{v_{out}}{R_L}$$\n\n**Voltage gain:**\n$$A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_mR_L}{1+\\beta g_mR_L}$$\n\n**Loop gain.** Break the loop at the gate; this is exact because the gate draws no current:\n$$T=\\beta g_mR_L=\\frac{g_mR_DR_2}{R_D+R_1+R_2}$$\n\nThe gain can then be written as:\n$$A_v=\\Big(1+\\frac{R_1}{R_2}\\Big)\\frac{T}{1+T}\\;\\xrightarrow{T\\gg1}\\;1+\\frac{R_1}{R_2}$$\n\n- The gain is non-inverting and set by a resistor ratio.\n- Also, $v_{gs}=-v_{in}/(1+T)$, so V_F tracks V_in (a \"virtual short\" between gate and source).\n\n**Input resistance.** The input current is the source current, $i_{in}=-i_d=v_{out}/R_L$:\n$$R_{in}=\\frac{R_L}{A_v}=\\frac{1+T}{g_m}=\\frac1{g_m}+\\frac{R_DR_2}{R_D+R_1+R_2}$$\n\n**Output resistance** (v_in = 0):\n$$R_{out}=\\frac{R_L}{1+T}=R_D\\parallel(R_1+R_2)\\parallel\\frac{R_1+R_2}{g_mR_2}$$\n\n| | Open loop (gate at ac ground) | Closed loop |\n|---|---|---|\n| Gain | g_mR_L | g_mR_L/(1+T) |\n| R_in | 1/g_m | (1+T)/g_m |\n| R_out | R_L | R_L/(1+T) |\n\nThese results match series–shunt feedback theory: input impedance rises, output impedance falls, and gain is desensitized by (1+T).\n\n## 4. Second-order effects\n\n**Channel-length modulation (r_o):**\n- $A_v=\\dfrac{(1+g_mr_o)R_L}{r_o+R_L+\\beta g_mr_oR_L}$\n- $R_{in}=\\dfrac{r_o+R_L+\\beta g_mr_oR_L}{1+g_mr_o}$\n- $R_{out}=R_L\\parallel r_o\\parallel\\dfrac{1}{\\beta g_m}$\n\n**Body effect:** the input drives g_m + g_mb, but the feedback acts only through g_m.\n- $A_v=(g_m+g_{mb})R_L/(1+\\beta g_mR_L)$\n- $R_{in}=(1+\\beta g_m R_L)/(g_m+g_{mb})$\n\n**Source resistance R_S:**\n- $v_{out}/v_s=R_L/(R_S+1/g_m+\\beta R_L)$\n- The loop gain drops to $\\beta g_mR_L/(1+g_mR_S)$.\n\n**Frequency response and stability:** with a load capacitance C_L,\n$$A_v(s)=\\frac{g_mR_L}{1+T+sR_LC_L}$$\n- The bandwidth widens by (1+T), and the gain–bandwidth product is about g_m/C_L.\n- With a low-impedance source, the loop has only two nodes (drain and gate). The characteristic polynomial is second order with all-positive coefficients, even including C_GD, so the circuit cannot oscillate.\n\n## 5. Example\n\nTake g_m = 5 mS, R_D = 2 kΩ, R₁ = R₂ = 10 kΩ:\n\n- R_L = 1.82 kΩ, β = 0.5, T = 4.55\n- A_v = 1.64 (the ideal value is 2)\n- R_in ≈ 1.11 kΩ (compared with 200 Ω for a plain CG stage)\n- R_out ≈ 330 Ω\n\n## Summary\n\nThe circuit is a single-transistor non-inverting amplifier with gain ≈ 1 + R₁/R₂. Its accuracy is limited by the modest loop gain T = g_mR_DR₂/(R_D+R₁+R₂).\n\nThe feedback:\n- raises the CG input resistance to (1+T)/g_m;\n- lowers the output resistance to R_L/(1+T);\n- self-biases M1, which always stays in saturation.\n\nDesign notes:\n- Keep R₁+R₂ ≫ R_D so the divider does not load the output.\n- In a CG LNA, this lets R_in be matched to R_S while g_m > 1/R_S. At match, the channel-noise contribution to the noise factor falls from γ to γ/(1+T). The cost is added thermal noise from R₁, R₂ and R_D.",
        "format": "markdown",
        "sha256": "610f971417f97e236a1b5f3b4320bcda59c465c089d3690ced642fa81c13880f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative-feedback polarity, and gives the correct closed-loop gain. Secondary analysis is not required for full credit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1774,
        "output_tokens": 39135,
        "total_tokens": 40909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1774,
        "output_tokens": 39135,
        "total_tokens": 40909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Common-Gate Stage with Resistive Feedback to the Gate\n\n## 1. Identifying the feedback\n\n- **M1** is a common-gate stage. The input is at the source, the output is at the drain, and the load is R_D.\n- **Sensing:** the divider R1–R2 is in parallel with the output, so it senses the output voltage.\n- **Return:** the divider sends $V_F=\\beta V_{out}$, with $\\beta = \\dfrac{R_2}{R_1+R_2}$, to the gate.\n- **Subtraction:** M1 responds to $V_{GS}=V_F-V_{in}$. The comparison is made in the voltage domain, in series with the input. M1 therefore acts as both the subtractor and the forward amplifier.\n\nThis is **voltage–voltage (series–shunt) feedback**.\n\n**Polarity check:** If V_in rises, then V_GS falls, I_D falls, and V_out rises. V_F then rises, which raises V_GS and opposes the original change. The feedback is **negative**.\n\n**Op-amp analogy:** In small-signal form, $v_{out}=g_mR_L(v_s-v_g)$. The source acts as the \"+\" input and the gate as the \"−\" input. The circuit is a one-transistor version of the non-inverting amplifier.\n\n## 2. Bias observation\n\nThe gate sits at a fraction of the drain voltage:\n\n$$V_{GD}=-\\frac{R_1}{R_1+R_2}V_{out}<V_{TH}$$\n\nSo M1 can never enter the triode region; whenever it is on, it is saturated. The same loop also stabilizes the DC current I_D.\n\n## 3. Small-signal analysis (neglecting λ and body effect)\n\nDefine the total load at the output:\n\n$$R_L = R_D\\parallel(R_1+R_2)$$\n\nBreaking the loop at the gate is exact here, because the gate draws no current. This gives:\n\n$$A_{OL}=g_mR_L,\\qquad T=g_m\\beta R_L=\\frac{g_mR_DR_2}{R_D+R_1+R_2}$$\n\n**Gain.** Substitute $v_{gs}=\\beta v_{out}-v_{in}$ into $v_{out}=-g_m v_{gs}R_L$. This gives $v_{out}=g_mR_L\\,(v_{in}-\\beta v_{out})$, so:\n\n$$\\frac{v_{out}}{v_{in}}=\\frac{g_mR_L}{1+g_m\\beta R_L}=\\frac{g_mR_D(R_1+R_2)}{R_D+R_1+R_2+g_mR_DR_2}\\;\\xrightarrow{T\\gg1}\\;1+\\frac{R_1}{R_2}$$\n\n**Output impedance** (with v_in = 0):\n\n$$\\frac1{R_{out}}=\\frac1{R_D}+\\frac1{R_1+R_2}+g_m\\beta$$\n\n$$R_{out}=\\frac{R_L}{1+T}=R_D\\parallel(R_1+R_2)\\parallel\\frac{1+R_1/R_2}{g_m}$$\n\n**Input impedance:**\n- All of the input current flows through M1 into R_L, so $v_{out}=i_{in}R_L$.\n- Then $v_{in}=v_g-v_{gs}=\\beta R_L i_{in}+i_{in}/g_m$, which gives:\n\n$$R_{in}=\\frac1{g_m}+\\beta R_L=\\frac{1+T}{g_m}$$\n\nThe usual common-gate input impedance, 1/g_m, is raised by (1+T), as expected for series mixing. Two useful identities follow: $A_v=R_L/R_{in}=g_mR_{out}$.\n\nIf R1 + R2 ≫ R_D, replace R_L by R_D in all the results above. This gives the familiar forms, for example $A_v\\approx g_mR_D/(1+g_mR_DR_2/(R_1+R_2))$.\n\n## 4. Sanity checks\n\n| Case | Behaviour |\n|---|---|\n| R2 = 0 (β = 0) | Gate at AC ground, so a plain CG stage: A_v = g_m(R_D‖R1), R_in = 1/g_m. |\n| R1 = 0 (β = 1) | Diode-connected device: A_v = R_L/(R_L + 1/g_m), R_in = 1/g_m + R_L. |\n\n## 5. Second-order effects and remarks\n\n- **With body effect and r_o:**\n  - $A_v=\\dfrac{(g_m+g_{mb}+1/r_o)R_L}{1+g_m\\beta R_L+R_L/r_o}$\n  - $R_{in}=R_L/A_v$\n  - $R_{out}=R_L\\parallel r_o\\parallel 1/(g_m\\beta)$\n- **Bandwidth:** with a load capacitance C_L, the output pole moves from $1/(R_LC_L)$ to $(1+T)/(R_LC_L)$. This is the usual gain–bandwidth trade.\n- **Source resistance:** if the circuit is driven from a source resistance R_S, the gain becomes $v_{out}/v_s=R_L/(R_S+R_{in})$.\n- **Use in LNAs:** matching R_in = R_S now allows $g_m=(1+T)/R_S$ instead of $1/R_S$. This lowers M1's noise contribution by roughly a factor of (1+T).\n  - The cost is that R1–R2 load the output.\n  - The divider also adds noise of about 4kT(R1‖R2), which appears directly in series with the input.",
        "format": "markdown",
        "sha256": "c8c3233b0b6523af38ca691e15c0c05b73e56c3191992832e68456ef36b50bf0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. Its closed-loop gain is also correct; the extra secondary analyses are not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1774,
        "output_tokens": 28562,
        "total_tokens": 30336,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26663,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1774,
        "output_tokens": 28562,
        "total_tokens": 30336,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26663,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# NMOS Source Follower with a Current-Source Load\n\n## Circuit identification\n\nThis is a **common-drain stage (source follower)**:\n\n- **M1** is the input device. Its gate is the input, its drain is at V_DD (AC ground), and its source is the output.\n- **M2** is a current source. Its gate is held at the DC bias V_b, which usually comes from a current mirror, so it sinks a nearly constant bias current I_D.\n- **Bulks** are not drawn. In a p-substrate process both bulks go to ground, so M1 sees V_SB = V_out and has **body effect**. M2 has none.\n\n**Function:** the circuit reproduces V_in at the output, shifted down by V_GS1. It has very high input impedance and low output impedance, so it works as a voltage buffer and level shifter.\n\n---\n\n## 1. DC (large-signal) behavior\n\nWith M2 in saturation (λ neglected), the bias current is:\n\n$$I_D=\\tfrac12\\mu_nC_{ox}\\left(\\tfrac WL\\right)_2 (V_b-V_{TH2})^2$$\n\nM1 must carry the same current, so:\n\n$$V_{out}=V_{in}-V_{GS1}=V_{in}-V_{TH1}-\\sqrt{\\frac{2I_D}{\\mu_nC_{ox}(W/L)_1}},\\qquad V_{TH1}=V_{TH0}+\\gamma\\left(\\sqrt{2\\Phi_F+V_{out}}-\\sqrt{2\\Phi_F}\\right)$$\n\nIf M1 and M2 were identical and there were no body effect, then V_GS1 = V_b and simply V_out = V_in − V_b.\n\n**Transfer characteristic**\n\n| V_in range | M1 | M2 | V_out |\n|---|---|---|---|\n| V_in < V_TH0 | off | deep triode, I = 0 | 0 |\n| V_TH0 < V_in < V_GS1 + V_OV2 | saturation | triode (acts as a resistor) | rises from 0 to V_OV2 |\n| V_in > V_GS1 + V_OV2 | saturation | saturation (current source) | ≈ V_in − V_GS1, slope ≈ 1/(1+η) |\n\n**Headroom**\n\n- **M2 saturated:** requires V_out ≥ V_b − V_TH2 = V_OV2.\n- **M1 saturated:** requires V_DD − V_out ≥ V_in − V_out − V_TH1, i.e. V_in ≤ V_DD + V_TH1. This is always satisfied for V_in ≤ V_DD.\n- **Output swing:** V_OV2 ≤ V_out ≤ V_DD − V_GS1.\n\nThe V_GS1 level shift costs headroom, which is a real drawback at low supply voltages.\n\n---\n\n## 2. Small-signal analysis (low frequency)\n\nFor M1: v_gs1 = v_in − v_out, v_bs1 = −v_out, v_ds1 = −v_out. M2 reduces to r_o2. KCL at the output gives:\n\n$$g_{m1}(v_{in}-v_{out})-g_{mb1}v_{out}-\\frac{v_{out}}{r_{o1}}-\\frac{v_{out}}{r_{o2}}=0$$\n\n**Voltage gain**\n\n$$A_v=\\frac{g_{m1}}{g_{m1}+g_{mb1}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}}\\approx\\frac{g_{m1}}{g_{m1}+g_{mb1}}=\\frac{1}{1+\\eta},\\qquad \\eta=\\frac{g_{mb1}}{g_{m1}}=\\frac{\\gamma}{2\\sqrt{2\\Phi_F+V_{out}}}$$\n\n- **Gain is below 1.** With an ideal current source and no body effect, V_GS1 would stay constant and A_v = 1. With body effect, V_TH1 rises as V_out rises, so V_GS1 must grow and the output lags the input.\n- **Equivalent resistor.** The body effect acts like a resistor 1/g_mb1 from the output to ground. Typical η ≈ 0.1–0.3 gives A_v ≈ 0.77–0.9.\n- **Nonlinearity.** η depends on V_out, so the gain varies with signal level and causes distortion. Finite r_o2 adds to this.\n\n**Output resistance** (with v_in = 0):\n\n$$R_{out}=\\frac{1}{g_{m1}+g_{mb1}}\\;\\|\\;r_{o1}\\;\\|\\;r_{o2}\\;\\approx\\;\\frac{1}{g_{m1}+g_{mb1}}$$\n\n**Input resistance:** ∞, since the input is a gate.\n\n**With an external load R_L:** add 1/R_L to the denominator of A_v.\n\n**Example:** take I_D = 100 µA and V_OV1 = 0.2 V, so g_m1 = 2I_D/V_OV1 = 1 mS. Take η = 0.2 (g_mb1 = 0.2 mS) and r_o1 = r_o2 = 100 kΩ.\n- A_v = 1/(1 + 0.2 + 0.01 + 0.01) ≈ **0.82**\n- R_out ≈ **820 Ω**\n- Without body effect, A_v would be ≈ 0.98.\n\n---\n\n## 3. Frequency response\n\n**Capacitances**\n- C_GD1 runs from the input to AC ground.\n- C_GS1 sits between the input and the output.\n- C_L = C_SB1 + C_DB2 + C_GD2 + C_load is at the output.\n\n**Transfer function.** Driving from a source resistance R_S, and neglecting g_mb and r_o:\n\n$$\\frac{V_{out}}{V_{in}}=\\frac{g_{m1}+C_{GS}s}{R_S(C_{GS}C_L+C_{GS}C_{GD}+C_{GD}C_L)s^2+(g_{m1}R_SC_{GD}+C_L+C_{GS})s+g_{m1}}$$\n\n- **Zero:** a left-half-plane zero at −g_m1/C_GS ≈ ω_T, caused by direct feedthrough through C_GS.\n- **Dominant pole:** ω_p1 ≈ g_m1/(g_m1R_SC_GD + C_L + C_GS), so the bandwidth is typically very wide.\n- **Possible peaking:** with large R_S and C_L the two poles can become complex, giving peaking or ringing.\n\n**Input capacitance is small.** C_GS1 is bootstrapped because both of its terminals move together:\n\n$$C_{in}\\approx C_{GD1}+(1-A_v)C_{GS1}$$\n\n**Output impedance can look inductive**\n\n$$Z_{out}=\\frac{1+R_SC_{GS}s}{g_{m1}+C_{GS}s}\\;\\Big\\|\\;\\frac{1}{g_{mb1}}$$\n\n- Z_out moves from about 1/g_m1 at low frequency toward R_S at high frequency.\n- If R_S > 1/g_m1, it behaves like 1/g_m1 in series with (R_S − 1/g_m1) ∥ L, where L = (C_GS/g_m1)(R_S − 1/g_m1).\n- Driving a capacitive load from such a source causes ringing.\n\n**Input impedance can show negative resistance.** Neglecting C_GD:\n\n$$Z_{in}=\\frac{1}{C_{GS}s}+\\left(1+\\frac{g_{m1}}{C_{GS}s}\\right)\\frac{1}{g_{mb1}+C_Ls}$$\n\nWhen ωC_L ≫ g_mb1, the real part becomes ≈ −g_m1/(C_GS C_L ω²). The follower can then oscillate if driven from an inductive source, such as a bond wire.\n\n---\n\n## 4. Noise\n\nReferred to the input, the thermal noise of both devices is (γ_n is the channel-noise coefficient; the body effect cancels out):\n\n$$\\overline{V^2_{n,in}}=4kT\\gamma_n\\left(\\frac{1}{g_{m1}}+\\frac{g_{m2}}{g_{m1}^2}\\right)+\\text{flicker terms}$$\n\n- Make g_m1 large and g_m2 small (large V_OV2) to reduce noise.\n- The stage adds noise without providing gain, so it is a poor choice as a first, low-noise stage.\n\n---\n\n## 5. Slewing (asymmetric)\n\n- **Rising input:** V_GS1 increases, so M1 can source a current much larger than I_D. The output follows quickly.\n- **Fast falling input:** M1 turns off, and C_L discharges only through M2. The slew rate is SR⁻ = I_D/C_L, e.g. 100 µA / 1 pF = 100 V/µs.\n\n---\n\n## 6. Other properties\n\n- **Supply rejection is good:** v_out/v_dd ≈ 1/[(g_m1 + g_mb1)r_o1].\n- **Bias noise matters:** noise on V_b reaches the output with gain ≈ −g_m2/(g_m1 + g_mb1), so V_b must be clean.\n\n---\n\n## Summary\n\n| Quantity | Result |\n|---|---|\n| DC output | V_in − V_GS1 (level shift) |\n| Gain | g_m1/(g_m1 + g_mb1 + g_o1 + g_o2) ≈ 1/(1+η) |\n| R_in | ∞ |\n| R_out | ≈ 1/(g_m1 + g_mb1) |\n| C_in | ≈ C_GD1 + (1 − A_v)C_GS1 |\n| Output swing | V_OV2 … V_DD − V_GS1 |\n\n**Strengths:** high input impedance, low output impedance, wide bandwidth and small input capacitance. This makes it an ideal buffer or level shifter, for example to drive low-impedance or capacitive loads, or between op-amp stages.\n\n**Weaknesses:**\n- Gain below 1 and nonlinearity, both from the body effect.\n- Loss of V_GS1 of headroom.\n- Added noise.\n- Slew rate limited to I_D/C_L on falling edges.\n- Inductive output impedance and negative input resistance at high frequency.\n\n**Remedies:**\n- **Remove body effect:** place M1 in its own well with source tied to bulk (a PMOS follower, or a deep-n-well NMOS). This costs extra well capacitance at the output.\n- **Faster falling edges and lower R_out:** raise I_D.\n- **Much lower R_out:** use feedback variants such as the super source follower or the flipped voltage follower.",
        "format": "markdown",
        "sha256": "321a82f290820151cefb769d133db36ab39748620ec62912e02ce90fc710ed7f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as its current-source load, and gives the positive, slightly sub-unity gain with the appropriate body-effect and finite-output-resistance terms.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1297,
        "output_tokens": 31161,
        "total_tokens": 32458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27518,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1297,
        "output_tokens": 31161,
        "total_tokens": 32458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27518,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the NMOS Source Follower with Current-Source Load\n\n## 1. What the circuit is\n\nThis is a **source follower** (common-drain stage) with an **NMOS current-source load**.\n\n- **M1** is the amplifying device. The input drives its gate, its drain is tied to V_DD (AC ground), and the output is taken from its source.\n- **M2** is a current source. Its gate is held at the constant bias V_b. It sets the bias current and appears in the small-signal model only as r_o2.\n- In a standard p-substrate process, both bodies connect to ground. For M1 this gives V_SB1 = V_out, so M1 suffers **body effect**. M2 has V_SB2 = 0.\n\n---\n\n## 2. Large-signal (DC) operation\n\n**Bias current** (M2 in saturation, ignoring λ):\n\n$$I_D=\\tfrac12\\mu_nC_{ox}\\left(\\tfrac{W}{L}\\right)_2 (V_b-V_{TH2})^2$$\n\n**Output level.** The same current flows through M1, so:\n\n$$V_{out}=V_{in}-V_{GS1}=V_{in}-V_{TH1}-\\sqrt{\\frac{2I_D}{\\mu_nC_{ox}(W/L)_1}}$$\n\nThe threshold of M1 rises with the output voltage because of body effect:\n\n$$V_{TH1}=V_{TH0}+\\gamma\\left(\\sqrt{2\\Phi_F+V_{out}}-\\sqrt{2\\Phi_F}\\right)$$\n\nThe output is the input shifted down by V_GS1. As an intuition check: if M1 and M2 were identical and body effect were ignored, then V_GS1 = V_b and V_out = V_in − V_b.\n\n**Transfer characteristic, region by region:**\n\n| Input condition | Device states | Output behavior |\n|---|---|---|\n| V_in < V_TH1 | M1 off | V_out = 0 |\n| V_in slightly > V_TH1 | M1 on; M2 in triode (acts as a resistor) | V_out begins to rise |\n| V_out > V_b − V_TH2 | M2 saturated (≈ constant current) | V_out tracks V_in |\n\nIn the tracking region the slope is:\n\n$$\\frac{\\partial V_{out}}{\\partial V_{in}}=\\frac{1}{1+\\eta},\\qquad \\eta=\\frac{g_{mb1}}{g_{m1}}=\\frac{\\gamma}{2\\sqrt{2\\Phi_F+V_{out}}}$$\n\n**Swing and headroom:**\n\n- M2 stays saturated if V_out ≥ V_b − V_TH2 = V_OD2.\n- M1 stays saturated if V_in ≤ V_DD + V_TH1, which is practically always true.\n\n$$V_{OD2}\\;\\le\\;V_{out}\\;\\le\\;V_{DD}-V_{GS1}$$\n\nThe level shift V_GS1, enlarged by body effect, costs voltage headroom.\n\n---\n\n## 3. Small-signal analysis\n\n**Model:**\n- M1 contributes g_m1, g_mb1 and r_o1.\n- M2 contributes only r_o2, since V_b is AC ground.\n- In M1, v_gs1 = v_in − v_out and v_bs1 = −v_out.\n\n### Voltage gain\nKCL at the output node:\n\n$$g_{m1}(v_{in}-v_{out})-g_{mb1}v_{out}=v_{out}\\left(\\frac1{r_{o1}}+\\frac1{r_{o2}}\\right)$$\n\n$$\\boxed{A_v=\\frac{g_{m1}}{g_{m1}+g_{mb1}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}}=\\frac{r_{o1}\\|r_{o2}\\|\\frac{1}{g_{mb1}}}{r_{o1}\\|r_{o2}\\|\\frac{1}{g_{mb1}}+\\frac{1}{g_{m1}}}}$$\n\nTwo useful limits:\n- **Ideal r_o:** A_v = g_m1/(g_m1 + g_mb1) = 1/(1+η). With typical η of 0.1–0.3, the gain is about 0.75–0.9.\n- **No body effect** (for example, M1 in its own well with source tied to body): A_v = g_m1(r_o1‖r_o2)/[1 + g_m1(r_o1‖r_o2)] ≈ 1.\n\n### Output resistance\nSet v_in = 0 and apply a test voltage v_x at the output:\n\n$$i_x=v_x\\left(g_{m1}+g_{mb1}+\\frac1{r_{o1}}+\\frac1{r_{o2}}\\right)$$\n\n$$\\boxed{R_{out}=\\frac{1}{g_{m1}}\\Big\\|\\frac{1}{g_{mb1}}\\Big\\|r_{o1}\\|r_{o2}\\approx\\frac{1}{g_{m1}+g_{mb1}}}$$\n\n### Input resistance\nAt low frequency the input resistance is infinite, because the input is an insulated gate.\n\n### Numerical example\nTake g_m1 = 1 mS, g_mb1 = 0.2 mS and r_o1 = r_o2 = 20 kΩ:\n\n- A_v = 1/1.3 ≈ 0.77\n- R_out ≈ 770 Ω\n\nThe stage therefore offers high input impedance, low output impedance and gain near 1. It works as a **voltage buffer, level shifter, or impedance transformer**.\n\n---\n\n## 4. Frequency response\n\n**Capacitances:**\n- C_L is the total output capacitance (C_SB1 + C_DB2 + C_GD2 + external load).\n- C_GS1 connects input to output.\n- C_GD1 connects the input to AC ground.\n\n**Input capacitance.** C_GS1 is bootstrapped by the follower action, so it appears much smaller than its physical value:\n\n$$C_{in}\\approx C_{GD1}+(1-A_v)\\,C_{GS1}$$\n\n**Ideal input source (as drawn):**\n\n$$\\frac{V_{out}}{V_{in}}(s)=\\frac{g_{m1}+sC_{GS1}}{g_{m1}+g_{mb1}+r_{o1}^{-1}+r_{o2}^{-1}+s(C_{GS1}+C_L)}$$\n\n- There is one pole at ω_p ≈ (g_m1 + g_mb1)/(C_L + C_GS1). It is high because the output node impedance is low.\n- There is a left-half-plane zero at ω_z = g_m1/C_GS1 ≈ ω_T. It comes from feed-forward through C_GS1.\n\n**With a source resistance R_S** (neglecting body effect and r_o), the response becomes second-order:\n\n$$\\frac{V_{out}}{V_{in}}=\\frac{g_m+sC_{GS}}{R_S(C_{GS}C_L+C_{GS}C_{GD}+C_{GD}C_L)s^2+(g_mR_SC_{GD}+C_L+C_{GS})s+g_m}$$\n\n- The poles may be complex, which causes ringing or peaking.\n- The output impedance is Z_out ≈ (1 + sR_S C_GS)/(g_m + sC_GS). It becomes **inductive** when R_S > 1/g_m.\n- With a capacitive load, Z_in has a **negative real part**, −g_m/(ω²C_GS C_L). This is a stability concern if the stage is driven from an inductive source.\n\n---\n\n## 5. Other practical characteristics\n\n- **Slewing is asymmetric.**\n  - Rising edges are fast, because M1 can source a large current.\n  - On falling edges M1 can turn off, leaving only M2 to discharge the load: SR⁻ = I_D2/C_L.\n- **Nonlinearity** has two sources:\n  - V_TH1, and hence the slope, varies with V_out through body effect.\n  - The finite r_o2 makes I_D, and therefore V_GS1, vary with V_out.\n- **Noise.** For thermal noise in long-channel devices:\n\n$$\\overline{V_{n,in}^2}\\approx 4kT\\cdot\\tfrac23\\left(\\frac{1}{g_{m1}}+\\frac{g_{m2}}{g_{m1}^2}\\right)$$\n\n  Keeping g_m2 small (a large overdrive on M2) reduces the load's noise contribution.\n- **Power:** P = V_DD · I_D.\n\n---\n\n## 6. Summary\n\n| Parameter | Result |\n|---|---|\n| DC output | V_out = V_in − V_GS1 (level shift down) |\n| Gain | g_m1 / (g_m1 + g_mb1 + 1/r_o1 + 1/r_o2) ≈ 1/(1+η) < 1 |\n| R_in | ∞ at low frequency |\n| R_out | ≈ 1/(g_m1 + g_mb1) (low) |\n| Output range | V_b − V_TH2 ≤ V_out ≤ V_DD − V_GS1 |\n| Main drawbacks | Gain < 1, body-effect nonlinearity, headroom loss of V_GS1, slew-limited falling edge |",
        "format": "markdown",
        "sha256": "870d8feb3c8b5e6b14a3b40875e3f7d043def522b030790465b4561ba47bd963"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as the current-source load, and gives a positive gain below unity with the appropriate body-effect and output-resistance terms. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1297,
        "output_tokens": 18764,
        "total_tokens": 20061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1297,
        "output_tokens": 18764,
        "total_tokens": 20061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the NMOS Source Follower with Current-Source Load\n\n## 1. What the circuit is\n\nThis is an NMOS **source follower** (common-drain stage) with an NMOS current-source load.\n\n- **M1** is the follower device. Its gate is the input, its drain is at V_DD (an AC ground), and the output is taken from its source.\n- **M2** has its gate at a fixed bias V_b. In saturation it acts as a current sink that sets the bias current:\n\n$$I_D=\\tfrac12\\mu_nC_{ox}\\left(\\tfrac{W}{L}\\right)_2 (V_b-V_{TH2})^2(1+\\lambda V_{out})$$\n\n- M1's bulk is assumed tied to ground, which is standard for NMOS in a p-substrate. So $V_{SB1}=V_{out}\\neq0$, and M1 suffers from **body effect**.\n\n---\n\n## 2. Large-signal (DC) behavior\n\nWith both transistors saturated, the same current flows through both:\n\n$$V_{out}=V_{in}-V_{GS1}=V_{in}-V_{TH1}-\\sqrt{\\frac{2I_D}{\\mu_nC_{ox}(W/L)_1}}$$\n\n$$V_{TH1}=V_{TH0}+\\gamma\\left(\\sqrt{2\\Phi_F+V_{out}}-\\sqrt{2\\Phi_F}\\right)$$\n\nThe output is the input shifted down by V_GS1. Because V_TH1 rises with V_out, this shift grows slightly as V_in increases. The equation is implicit in V_out, so it is solved iteratively.\n\n**Regions of operation as V_in rises from 0** (with $V_{ov2}=V_b-V_{TH2}$):\n\n| V_in | M1 | M2 | V_out |\n|---|---|---|---|\n| $<V_{TH0}$ | off | on, $V_{DS2}=0$ (deep triode) | 0 |\n| $V_{TH0}$ to $V_{GS1}+V_{ov2}$ | saturated | triode (acts like a resistor) | rises; slope grows from 0 |\n| $>V_{GS1}+V_{ov2}$ | saturated | saturated (current source) | $\\approx V_{in}-V_{GS1}$, slope $\\approx 1/(1+\\eta)$ |\n\n**Saturation conditions:**\n- M2: $V_{out}\\ge V_b-V_{TH2}$, which requires $V_{in}\\ge V_{TH1}+V_{ov1}+V_{ov2}$.\n- M1: $V_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{TH1}$, which requires $V_{in}\\le V_{DD}+V_{TH1}$. This is always met for $V_{in}\\le V_{DD}$.\n\n**Output swing:** $V_b-V_{TH2}\\;\\le\\;V_{out}\\;\\le\\;V_{DD}-V_{GS1}$\n\n*Special case:* if $(W/L)_1=(W/L)_2$ and body effect and λ are ignored, then $V_{GS1}=V_{GS2}=V_b$. In that case $V_{out}=V_{in}-V_b$.\n\n---\n\n## 3. Small-signal voltage gain\n\nIn the small-signal model:\n- $v_{gs1}=v_{in}-v_{out}$ and $v_{bs1}=-v_{out}$.\n- M2 reduces to r_o2, because its gate is at AC ground.\n\nKCL at the output node gives:\n\n$$g_{m1}(v_{in}-v_{out})-g_{mb1}v_{out}=v_{out}\\left(\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right)$$\n\n$$\\boxed{A_v=\\frac{g_{m1}}{g_{m1}+g_{mb1}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}}=\\frac{\\frac{1}{g_{mb1}}\\parallel r_{o1}\\parallel r_{o2}}{\\left(\\frac{1}{g_{mb1}}\\parallel r_{o1}\\parallel r_{o2}\\right)+\\frac{1}{g_{m1}}}}$$\n\n**Interpretation:** the stage is a voltage divider. The top element is 1/g_m1, looking up into M1's source. The bottom element is $1/g_{mb1}\\parallel r_{o1}\\parallel r_{o2}$. The body effect behaves like a resistor 1/g_mb1 from output to ground.\n\n**Limiting cases:**\n- **λ = 0:** $A_v=\\dfrac{1}{1+\\eta}$, where $\\eta=\\dfrac{g_{mb}}{g_m}=\\dfrac{\\gamma}{2\\sqrt{2\\Phi_F+V_{out}}}$.\n  - Typically η ≈ 0.1–0.3, so A_v ≈ 0.75–0.9.\n  - Differentiating the large-signal equation gives the same result.\n- **No body effect** (bulk tied to source): $A_v=\\dfrac{g_{m1}(r_{o1}\\|r_{o2})}{1+g_{m1}(r_{o1}\\|r_{o2})}\\approx1$.\n- **External load R_L:** replace $r_{o1}\\|r_{o2}$ with $r_{o1}\\|r_{o2}\\|R_L$.\n\n**Nonlinearity:** η decreases as V_out rises, so the gain creeps up with V_in. Finite r_o2 also makes I_D, and hence V_GS1, signal-dependent.\n\n---\n\n## 4. Output resistance\n\nWith V_in set to AC ground:\n\n$$R_{out}=\\frac{1}{g_{m1}}\\Big\\|\\frac{1}{g_{mb1}}\\Big\\|r_{o1}\\Big\\|r_{o2}\\approx\\frac{1}{g_{m1}+g_{mb1}}$$\n\nThis resistance is low, which makes the stage a good voltage buffer.\n\n---\n\n## 5. Input impedance\n\n- **At low frequency** the input resistance is essentially infinite, since the input drives a gate.\n- **Input capacitance:** $C_{in}\\approx C_{GD1}+(1-A_v)C_{GS1}$.\n  - C_GS1 is \"bootstrapped\": both its terminals move almost together.\n  - C_GD1 has no Miller multiplication, because the drain is at AC ground.\n- **At high frequency with a capacitive load C_L**, Z_in contains a negative resistance of about $-g_{m1}/(\\omega^2C_{GS1}C_L)$. This can cause ringing or oscillation if the stage is driven from an inductive source.\n\n---\n\n## 6. Frequency response\n\nAssume an ideal voltage source drives the input. Let C_L be the total output capacitance, $C_{SB1}+C_{DB2}+C_{GD2}+C_{load}$. Then:\n\n$$\\frac{V_{out}}{V_{in}}(s)=\\frac{g_{m1}+sC_{GS1}}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}+s(C_{GS1}+C_L)}$$\n\n- **Pole:** $\\omega_p\\approx(g_{m1}+g_{mb1})/(C_L+C_{GS1})$. This is a wide bandwidth, because the output node is low-impedance.\n- **Left-half-plane zero:** $\\omega_z=g_{m1}/C_{GS1}\\approx\\omega_T$.\n- With a finite source resistance, the response becomes second-order and can show peaking.\n\n---\n\n## 7. Slewing and noise\n\n**Slewing is asymmetric:**\n- On a rising input, M1's V_GS increases, so it can source a large current.\n- On a fast falling input, M1 cuts off, and only M2's fixed current discharges the load:\n\n$$SR_{fall}=\\frac{I_{D2}}{C_L}$$\n\n**Input-referred thermal noise** (here γ_n is the noise coefficient, not the body-effect γ):\n\n$$\\overline{v_{n,in}^2}\\approx4kT\\gamma_n\\left(\\frac{1}{g_{m1}}+\\frac{g_{m2}}{g_{m1}^2}\\right)$$\n\nBoth transistors contribute noise, while the stage provides no voltage gain.\n\n---\n\n## Summary\n\n- **Function:** a voltage buffer and DC level shifter (down by V_GS1). It has very high input impedance, low output impedance ≈ 1/(g_m1+g_mb1), and gain slightly below 1.\n- **Limitations:**\n  - The gain is below 1 and mildly nonlinear, because of body effect and finite r_o2.\n  - The V_GS1 shift plus V_ov2 consumes voltage headroom.\n  - Keeping M2 saturated at low V_out needs a small V_ov2, which means a very wide M2.\n  - The current the stage can sink is limited to I_D2.\n- **Choice of bias current** (set by V_b and (W/L)_2):\n  - Higher I_D lowers R_out and raises bandwidth and slew rate.\n  - The cost is more power, a larger level shift, and a higher minimum output voltage.\n- **Improvement:** a PMOS follower in its own n-well, with bulk tied to source, removes body effect. Its gain approaches 1 and linearity improves, but it needs a larger device for the same g_m.",
        "format": "markdown",
        "sha256": "cf8858c58f07812ce82307810325f255d762db60b668db485c3eec7f3efff3ac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as the current-source load and gives a positive gain slightly below unity, including body effect and finite-output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1297,
        "output_tokens": 28934,
        "total_tokens": 30231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25733,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1297,
        "output_tokens": 28934,
        "total_tokens": 30231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25733,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the CMOS Inverter\n\n## Circuit identification\n\nThis is a **CMOS inverter**, also called a complementary common-source stage:\n\n- **M1** is an NMOS common-source transistor with its source at ground.\n- **M2** is a PMOS common-source transistor with its source at $V_{DD}$.\n- The two gates are tied together to form the input. The two drains are tied together to form the output.\n\nKey structural features:\n\n- **Push-pull action.** Both transistors are driven by $V_{in}$. When $V_{in}$ rises, M1 sinks more current while M2 sources less. M2 is therefore an amplifying (\"active\") load, not just a current source.\n- **Current reuse.** With no external load, the same DC current flows through both devices.\n- **No body effect.** Both sources sit at the rails.\n- **No DC input current.** The input drives only gates.\n\n---\n\n## 1. Large-signal behavior (voltage transfer characteristic)\n\n**Notation:**\n- $\\beta_n=\\mu_nC_{ox}(W/L)_1$ and $\\beta_p=\\mu_pC_{ox}(W/L)_2$\n- $V_{TN}\\equiv V_{TH1}$ and $V_{TP}\\equiv|V_{TH2}|$\n- $V_{GS1}=V_{in}$ and $V_{SG2}=V_{DD}-V_{in}$\n\n**Saturation conditions:**\n- M1 is saturated if $V_{out}\\ge V_{in}-V_{TN}$.\n- M2 is saturated if $V_{out}\\le V_{in}+V_{TP}$.\n\n**Operating regions** (assuming $V_{DD}>V_{TN}+V_{TP}$):\n\n| $V_{in}$ range | M1 | M2 | $V_{out}$ |\n|---|---|---|---|\n| $0 \\dots V_{TN}$ | off | triode, $I=0$ | $V_{DD}$ |\n| $V_{TN}\\dots \\approx V_M$ | saturation | triode | slightly below $V_{DD}$ |\n| $\\approx V_M$ | saturation | saturation | falls steeply (high gain) |\n| $\\approx V_M \\dots V_{DD}-V_{TP}$ | triode | saturation | slightly above 0 |\n| $V_{DD}-V_{TP}\\dots V_{DD}$ | triode, $I=0$ | off | 0 |\n\n**Switching threshold.** $V_M$ is defined by $V_{out}=V_{in}$. With both devices saturated and $\\lambda\\approx0$:\n\n$$\\tfrac12\\beta_n(V_M-V_{TN})^2=\\tfrac12\\beta_p(V_{DD}-V_M-V_{TP})^2\\;\\Rightarrow\\;\nV_M=\\frac{V_{TN}+r\\,(V_{DD}-V_{TP})}{1+r},\\qquad r=\\sqrt{\\frac{\\mu_p(W/L)_2}{\\mu_n(W/L)_1}}$$\n\n- $V_M=V_{DD}/2$ when $V_{TN}=V_{TP}$ and $(W/L)_2/(W/L)_1=\\mu_n/\\mu_p\\approx 2$–$3$.\n- A stronger PMOS raises $V_M$; a stronger NMOS lowers it.\n\n**Current at $V_M$.** This is the peak short-circuit current. It is also the bias current when the circuit is used as an amplifier. Because $V_{ov1}+V_{ov2}=V_{DD}-V_{TN}-V_{TP}$:\n\n$$I_D\\big|_{V_M}=\\frac12\\,\\frac{\\beta_n\\beta_p}{(\\sqrt{\\beta_n}+\\sqrt{\\beta_p})^2}\\,(V_{DD}-V_{TN}-V_{TP})^2$$\n\n**Behavior at the transition.**\n- With $\\lambda=0$, the transition at $V_M$ is vertical.\n- In that case $V_{out}$ is undefined anywhere in the window $[V_{ov1},\\,V_{DD}-V_{ov2}]$.\n- Channel-length modulation gives the transition a finite slope.\n- That same window is the output range over which both devices stay saturated.\n\n**Noise margins.** For a symmetric inverter ($\\beta_n=\\beta_p$, $V_{TN}=V_{TP}=V_{TH}$):\n- $V_{IL}=(3V_{DD}+2V_{TH})/8$\n- $V_{IH}=(5V_{DD}-2V_{TH})/8$\n- Therefore $NM_L=NM_H=(3V_{DD}+2V_{TH})/8$.\n\n---\n\n## 2. Small-signal behavior (biased at $V_{in}\\approx V_M$)\n\nA small increase $v_{in}$ raises $I_{D1}$ by $g_{m1}v_{in}$. It also lowers $|I_{D2}|$ by $g_{m2}v_{in}$. Both changes pull the output down. KCL at the output gives:\n\n$$(g_{m1}+g_{m2})v_{in}+\\frac{v_{out}}{r_{o1}\\parallel r_{o2}}=0$$\n\n$$\\boxed{A_v=-(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})},\\qquad R_{out}=r_{o1}\\parallel r_{o2},\\qquad R_{in}\\to\\infty$$\n\nUsing $g_m=2I_D/V_{ov}$ and $r_o=1/(\\lambda I_D)$:\n\n$$A_v=-\\frac{2\\,(1/V_{ov1}+1/V_{ov2})}{\\lambda_n+\\lambda_p}\\;\\xrightarrow{\\text{matched}}\\;-g_mr_o=-\\frac{2}{\\lambda V_{ov}}$$\n\n- For matched devices, the gain equals the intrinsic gain of a single transistor.\n- For a given channel length, the gain is set by the overdrives. At $V_M$ these are fixed by $V_{DD}-V_{TN}-V_{TP}$, not by the bias current.\n\n**Comparison with a CS stage using a current-source load** (same devices, same current):\n- The output resistance is the same.\n- The transconductance is $g_{m1}+g_{m2}$ instead of $g_{m1}$.\n- The result is about **twice the gain and twice the gain-bandwidth for the same power**.\n\n---\n\n## 3. Frequency response and noise\n\n**Transfer function.** Assume a load $C_L$ (including $C_{DB1}+C_{DB2}$) and an ideal input source. Let $g_m=g_{m1}+g_{m2}$, $C_{GD}=C_{GD1}+C_{GD2}$, and $R_{out}=r_{o1}\\parallel r_{o2}$:\n\n$$\\frac{V_{out}}{V_{in}}(s)=-\\frac{(g_m-sC_{GD})R_{out}}{1+sR_{out}(C_L+C_{GD})}$$\n\n- The dominant pole is at $1/[R_{out}(C_L+C_{GD})]$.\n- There is a right-half-plane zero at $g_m/C_{GD}$.\n- The gain-bandwidth is approximately $(g_{m1}+g_{m2})/C_L$.\n- The Miller input capacitance is $C_{in}\\approx C_{GS1}+C_{GS2}+(1+|A_v|)(C_{GD1}+C_{GD2})$.\n\n**Thermal noise.** Both devices' noise currents add at the output, but both devices also amplify the signal:\n\n$$\\overline{v^2_{n,in}}=\\frac{4kT\\gamma(g_{m1}+g_{m2})}{(g_{m1}+g_{m2})^2}=\\frac{4kT\\gamma}{g_{m1}+g_{m2}}$$\n\nThis is half the input noise of a CS stage with a noiseless load at the same current.\n\n---\n\n## 4. Weaknesses as an analog amplifier\n\n1. **Ill-defined operating point.**\n   - With $|A_v|$ in the tens, a few mV of change in $V_{in}$, $V_{TH}$, or $V_{DD}$ moves $V_{out}$ by hundreds of mV. This can push one device into triode.\n   - The input therefore cannot simply be biased with a DC source.\n   - The usual fix is feedback: place a large resistor $R_F$ from output to input and AC-couple the input. At DC this forces $V_{in}=V_{out}=V_M$.\n   - This self-biased form is used in Pierce crystal oscillators and inverter-based TIAs.\n   - The feedback lowers the input resistance to about $R_F/(1+|A_v|)$.\n\n2. **Bias set by the supply.**\n   - At $V_M$, $V_{DD}=V_{TN}+V_{TP}+V_{ov1}+V_{ov2}$.\n   - The overdrives, the current ($\\propto (V_{DD}-V_{TN}-V_{TP})^2$), and the gain are all dictated by $V_{DD}$ and by process and temperature.\n\n3. **Poor supply rejection.**\n   - With $v_{in}$ held fixed, a change in $V_{DD}$ directly modulates $V_{SG2}$:\n   $$\\frac{v_{out}}{v_{dd}}=\\frac{(1+g_{m2}r_{o2})\\,r_{o1}}{r_{o1}+r_{o2}}\\approx\\frac{g_mr_o}{2}$$\n   - This is about half the signal gain, so PSRR ≈ $(g_{m1}+g_{m2})/g_{m2}\\approx 2$, or about 6 dB.\n   - Remedies are a regulated supply or pseudo-differential operation with common-mode feedback.\n\n---\n\n## 5. As a logic gate\n\n- **Rail-to-rail output.** $V_{OH}=V_{DD}$ and $V_{OL}=0$, because the \"on\" device carries zero steady-state current.\n- **Power.** Static power is essentially zero apart from leakage. Dynamic power is $\\alpha C_LV_{DD}^2f$, plus short-circuit power while $V_{TN}<V_{in}<V_{DD}-V_{TP}$.\n- **Regeneration.** The gain magnitude exceeds 1 in the transition region, so a chain of inverters restores degraded logic levels.\n- **Drive and delay.**\n  - The on-resistance is $R_{on}\\approx1/[\\beta(V_{DD}-V_T)]$ for whichever device is on.\n  - Delay scales roughly as $R_{on}C_L$.\n  - Choosing $\\beta_n=\\beta_p$ gives equal rise and fall times.\n\n---\n\n## 6. Numerical example\n\n**Assumptions:** $V_{DD}=1.8$ V, $V_{TN}=V_{TP}=0.5$ V, $\\beta_n=\\beta_p=2$ mA/V², $\\lambda=0.1$ V⁻¹, $C_L=1$ pF.\n\n**Results:**\n- $V_M=0.9$ V and $V_{ov}=0.4$ V.\n- $I_D=160\\ \\mu$A, which is 0.29 mW when biased at $V_M$.\n- $g_{m1}=g_{m2}=0.8$ mS and $r_{o1}=r_{o2}=62.5$ kΩ.\n- $A_v=-(1.6\\text{ mS})(31.25\\text{ kΩ})=-50$.\n- The supply gain is $v_{out}/v_{dd}\\approx25.5$, so PSRR ≈ 2.\n- $f_{-3dB}\\approx5.1$ MHz and GBW ≈ 255 MHz.\n- A ±10% change in $V_{DD}$ shifts the self-biased current by about +50% / −40%.\n\n---\n\n**Bottom line:**\n- **As a logic gate,** the inverter gives a rail-to-rail swing with essentially no static power.\n- **As an amplifier biased at $V_M$,** it is a current-reusing CS stage with $A_v=-(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})$. It offers excellent gain, bandwidth, and noise per unit of current.\n- **Its drawbacks** are that the bias point, current, and gain are set by $V_{DD}$ and the threshold voltages, and its PSRR is only about 6 dB. It is therefore normally used with feedback biasing and a clean supply.",
        "format": "markdown",
        "sha256": "62cf48b83f023b9f028d8c79aa97ce0c645fce1a94f5343d5c9dedb3fce8f04a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up, with the gates and drains connected as input and output. Its central description is consistent with inverter operation; the additional analysis is not required for full credit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 44652,
        "total_tokens": 44978,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 44652,
        "total_tokens": 44978,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# CMOS Inverter / Complementary Common-Source Stage\n\n## 1. Circuit identification\n\n- **M1 (NMOS)** has its source at ground. **M2 (PMOS)** has its source at V_DD.\n- The two gates are tied together and form the input. The two drains are tied together and form the output.\n\nThis is the **CMOS inverter**. Used as an analog amplifier, it is a **complementary (push-pull) common-source stage**. Both transistors are CS devices driven by the same input, and each acts as the other's active load. Both sources sit at their bulk potentials, so there is **no body effect**.\n\n**Notation:**\n- $k_n=\\mu_nC_{ox}(W/L)_1$ and $k_p=\\mu_pC_{ox}(W/L)_2$\n- $V_{TN}=V_{TH1}$ and $V_{TP}=|V_{TH2}|$\n- Assume $V_{DD}>V_{TN}+V_{TP}$ and the square-law model with λ = 0 for the DC curve.\n\n---\n\n## 2. Large-signal behavior (voltage transfer characteristic)\n\nWith no load current, $I_{D1}=I_{D2}$ sets V_out. The saturation boundaries are:\n- M1 is saturated if $V_{out}\\ge V_{in}-V_{TN}$.\n- M2 is saturated if $V_{out}\\le V_{in}+V_{TP}$.\n\n| Region | V_in | M1 | M2 | V_out |\n|---|---|---|---|---|\n| A | $0 \\to V_{TN}$ | off | triode ($I_D=0$) | $V_{DD}$ |\n| B | $V_{TN}\\to V_M$ | sat | triode | falls from $V_{DD}$ to $V_M+V_{TP}$ |\n| C | $\\approx V_M$ | sat | sat | steep drop (high-gain region) |\n| D | $V_M \\to V_{DD}-V_{TP}$ | triode | sat | falls from $V_M-V_{TN}$ toward 0 |\n| E | $V_{DD}-V_{TP}\\to V_{DD}$ | triode ($I_D=0$) | off | 0 |\n\n**Region B:**\n$$V_{out}=V_{in}+V_{TP}+\\sqrt{(V_{DD}-V_{in}-V_{TP})^2-\\tfrac{k_n}{k_p}(V_{in}-V_{TN})^2}$$\n\n**Region D:**\n$$V_{out}=(V_{in}-V_{TN})-\\sqrt{(V_{in}-V_{TN})^2-\\tfrac{k_p}{k_n}(V_{DD}-V_{in}-V_{TP})^2}$$\n\n**Switching threshold.** Set V_in = V_out = V_M with both devices saturated:\n$$\\frac{k_n}{2}(V_M-V_{TN})^2=\\frac{k_p}{2}(V_{DD}-V_M-V_{TP})^2\n\\;\\Rightarrow\\;\nV_M=\\frac{V_{TN}+r\\,(V_{DD}-V_{TP})}{1+r},\\quad r=\\sqrt{k_p/k_n}$$\n\n- A stronger PMOS pushes V_M up; a stronger NMOS pushes it down.\n- If $k_n=k_p$ and $V_{TN}=V_{TP}$, then V_M = V_DD/2. Matching $k_n=k_p$ requires $(W/L)_2/(W/L)_1=\\mu_n/\\mu_p\\approx 2\\text{–}3$.\n\n**Key DC properties:**\n- The output swings rail to rail: V_OH = V_DD and V_OL = 0.\n- No static current flows in either logic state. Current flows only during the transition and peaks at V_M:\n$$I_{peak}=\\tfrac{k_n}{2}(V_M-V_{TN})^2$$\n- For a symmetric inverter, the noise margins are:\n$$NM_L=NM_H=\\frac{3V_{DD}+2V_T}{8}$$\n\n---\n\n## 3. Small-signal analysis (biased at V_M, both devices saturated)\n\nA positive $v_{in}$ increases M1's current and simultaneously reduces M2's $V_{SG}$. Both effects pull the output down, so the **transconductances add**.\n\nKCL at the output:\n$$g_{m1}v_{in}+\\frac{v_{out}}{r_{o1}}+g_{m2}v_{in}+\\frac{v_{out}}{r_{o2}}=0$$\n\n$$\\boxed{A_v=-(g_{m1}+g_{m2})\\,(r_{o1}\\parallel r_{o2})}$$\n\nBoth devices carry the same $I_D$. Using $g_m=2I_D/V_{OV}=\\sqrt{2kI_D}$ and $r_o=1/(\\lambda I_D)$:\n$$|A_v|=\\frac{2}{\\lambda_n+\\lambda_p}\\left(\\frac{1}{V_{OV1}}+\\frac{1}{V_{OV2}}\\right)=\\frac{\\sqrt{2k_n}+\\sqrt{2k_p}}{(\\lambda_n+\\lambda_p)\\sqrt{I_D}}$$\n\n**Example:** with λ = 0.1 V⁻¹ and V_OV = 0.2 V for both devices, |A_v| = 100 (40 dB).\n\n**Comparison with a current-source load.** If M2's gate were held at a fixed bias, the gain would be $-g_{m1}(r_{o1}\\parallel r_{o2})$.\n- The complementary stage gains a factor $(1+g_{m2}/g_{m1})$ at the same current (\"current reuse\").\n- In a symmetric design this is 2×, giving $A_v=-g_m r_o$, the full intrinsic gain of one transistor.\n\n**Other small-signal properties:**\n- R_in → ∞ and $R_{out}=r_{o1}\\parallel r_{o2}$.\n- The gain varies as $1/\\sqrt{I_D}$, so lower bias current gives higher gain (until weak inversion).\n- With both devices saturated, the output can swing over $V_{OV1}\\le V_{out}\\le V_{DD}-V_{OV2}$. The corresponding input range is only about 1/|A_v| of that (around 10 mV), so the stage is highly nonlinear for large signals.\n- The input-referred thermal noise is $4kT\\gamma/(g_{m1}+g_{m2})$, which is very efficient for the power spent.\n\n---\n\n## 4. Frequency response\n\nLet $C_L$ be the total output capacitance (including C_DB1 + C_DB2) and $C_{GD}=C_{GD1}+C_{GD2}$ the capacitance bridging input and output. Then:\n\n$$A_v(s)=-\\frac{(g_{m1}+g_{m2})R_{out}\\left(1-\\frac{sC_{GD}}{g_{m1}+g_{m2}}\\right)}{1+sR_{out}(C_L+C_{GD})}$$\n\n- **Dominant pole:** $\\omega_p=1/[(r_{o1}\\parallel r_{o2})(C_L+C_{GD})]$\n- **Right-half-plane zero:** $\\omega_z=(g_{m1}+g_{m2})/C_{GD}$\n- **Gain-bandwidth:** $\\omega_u\\approx(g_{m1}+g_{m2})/C_L$\n- **Finite source resistance R_S:** the Miller input capacitance is $C_{in}\\approx C_{GS1}+C_{GS2}+(1+|A_v|)C_{GD}$, which adds an input pole near $1/(R_SC_{in})$.\n\n---\n\n## 5. Practical considerations\n\n1. **The bias point is ill-defined.**\n   - I_D and V_M depend directly on V_TH, μ, temperature and V_DD.\n   - With |A_v| around 100, a few mV of input error drives the output to a rail.\n   - The stage is therefore normally biased with negative feedback. A common method is a large resistor from V_out to V_in with an AC-coupled input, which self-biases at V_in = V_out = V_M. This is used in crystal oscillators, clock buffers and inverter-based TIAs.\n\n2. **Supply rejection is poor.** With $v_{in}$ fixed, a supply change appears directly as M2's $v_{sg}$:\n$$\\frac{v_{out}}{v_{dd}}=\\Big(g_{m2}+\\tfrac{1}{r_{o2}}\\Big)(r_{o1}\\parallel r_{o2})\\approx g_{m2}(r_{o1}\\parallel r_{o2})$$\n   This is about half the signal gain, so PSRR ≈ (g_m1 + g_m2)/g_m2 ≈ 2 (about 6 dB).\n\n3. **Push-pull drive is an advantage.** For large inputs, one device turns fully on while the other turns off. The stage can therefore source or sink currents far above its quiescent current, so slewing is not limited by a bias current.\n\n4. **Digital-gate performance.**\n   - Dynamic power is $P\\approx\\alpha C_LV_{DD}^2f$, plus some short-circuit power during transitions.\n   - Delay is roughly $t_p\\approx (C_LV_{DD}/2)/I_{on}$.\n   - Choosing $k_p=k_n$ equalizes rise and fall times.\n\n---\n\n## Summary\n\nThe circuit is a CMOS inverter.\n- **As a logic gate:** it gives rail-to-rail output, draws essentially zero static power, and has a switching threshold V_M set by $\\sqrt{k_p/k_n}$.\n- **As an amplifier biased at V_M:** it is a complementary CS stage with $A_v=-(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})$, which is about −g_m·r_o in a symmetric design and twice the gain of a CS stage with a current-source load. Its output resistance is $r_{o1}\\parallel r_{o2}$ and its dominant pole is at the output.\n- **Main drawback:** its bias current, gain and output level are very sensitive to PVT and V_DD, so it needs feedback biasing in analog use.",
        "format": "markdown",
        "sha256": "9b9caddb1019482ed5cd2917ece6b1b47c7041dcc5544b487dc1e11806fbb22c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up tied to the shared input and output. Its central operating description is correct; the optional additional analysis does not contradict the inverter’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 27929,
        "total_tokens": 28255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24442,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 27929,
        "total_tokens": 28255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24442,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# CMOS Inverter (CS Amplifier with Active Load)\n\n## 1. What the circuit is\n\n- **M1** (NMOS, source at ground) and **M2** (PMOS, source at V_DD) are both **common-source** devices. They share the gate input V_in, and their drains are tied together at V_out.\n- In digital design this is the **CMOS inverter**. As an analog circuit it is a **CS stage with an active load** (also called a complementary, push-pull, or current-reuse amplifier). The PMOS is not just a load: it also amplifies.\n- Both sources are at their body potentials, so there is no body effect. Nothing else connects to the output, so the same DC current flows through M1 and M2.\n\n## 2. Large-signal behavior (voltage transfer characteristic)\n\nLet β_n = μ_nC_ox(W/L)₁ and β_p = μ_pC_ox(W/L)₂, and assume V_DD > V_TH1 + |V_TH2|.\n\nThe saturation conditions are:\n- M1 is saturated if V_out ≥ V_in − V_TH1.\n- M2 is saturated if V_out ≤ V_in + |V_TH2|.\n\n| Input range | M1 | M2 | V_out |\n|---|---|---|---|\n| $V_{in}<V_{TH1}$ | off | triode ($V_{SD2}=0$) | $V_{DD}$ |\n| $V_{TH1}<V_{in}<V_M$ | saturation | triode | falls slowly from $V_{DD}$ |\n| $V_{in}\\approx V_M$ | saturation | saturation | steep drop (vertical if λ = 0) |\n| $V_M<V_{in}<V_{DD}-\\lvert V_{TH2}\\rvert$ | triode | saturation | approaches 0 |\n| $V_{in}>V_{DD}-\\lvert V_{TH2}\\rvert$ | triode ($V_{DS1}=0$) | off | 0 |\n\n**Switching threshold.** Set V_in = V_out = V_M with both devices saturated:\n\n$$\\frac{\\beta_n}{2}(V_M-V_{TH1})^2=\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{TH2}|)^2\n\\;\\Rightarrow\\;\nV_M=\\frac{V_{TH1}+\\sqrt{\\beta_p/\\beta_n}\\,(V_{DD}-|V_{TH2}|)}{1+\\sqrt{\\beta_p/\\beta_n}}$$\n\n- **Centering V_M.** Getting V_M = V_DD/2 (with V_TH1 = |V_TH2|) requires β_n = β_p. That means (W/L)₂ ≈ (μ_n/μ_p)(W/L)₁, roughly 2–3 times (W/L)₁.\n- **Supply current.** It is zero at both logic levels and peaks near V_M at $I_{peak}=\\tfrac{\\beta_n}{2}(V_M-V_{TH1})^2$. So there is no static power, and the output swings rail to rail.\n- **Noise margins (symmetric case).** $V_{IL}=(3V_{DD}+2V_{TH})/8$ and $V_{IH}=(5V_{DD}-2V_{TH})/8$.\n\n## 3. Small-signal gain (biased at V_M, both devices saturated)\n\nBoth sources are at AC ground, so v_gs1 = v_gs2 = v_in. Each device acts as a g_m·v_in current source in parallel with r_o, connected from the output to AC ground. KCL at the output gives:\n\n$$(g_{m1}+g_{m2})v_{in}+v_{out}\\left(\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right)=0$$\n\n$$\\boxed{A_v=-(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})},\\qquad R_{out}=r_{o1}\\parallel r_{o2},\\qquad R_{in}\\to\\infty$$\n\n**Intuition.** When V_in rises, M1 sinks more current *and* M2 sources less. Both effects pull V_out down, so the two transconductances add.\n\n**In terms of bias.** Using g_m = 2I_D/V_ov and r_o ≈ 1/(λI_D):\n\n$$|A_v|=\\frac{2(1/V_{ov1}+1/V_{ov2})}{\\lambda_1+\\lambda_2}\\;\\xrightarrow{\\text{symmetric}}\\;\\frac{2}{\\lambda V_{ov}}$$\n\nA CS stage with a current-source load (M2's gate held at a fixed bias) gives only 1/(λV_ov). The inverter therefore delivers **twice the gain, and twice the g_m/I_D, for the same current**.\n\n**Other properties:**\n- **Supply sets the operating point.** Since V_GS1 + V_SG2 = V_DD, we have V_ov1 + V_ov2 = V_DD − V_TH1 − |V_TH2|. The supply therefore fixes the overdrives, the current, and the gain.\n- **Narrow high-gain window.** High gain requires V_ov1 ≤ V_out ≤ V_DD − V_ov2, a span of V_TH1 + |V_TH2|. This corresponds to an input window of only about (V_TH1 + |V_TH2|)/|A_v|. Outside it, one device enters triode and the gain collapses.\n- **Class-AB drive.** For large inputs, one device turns on hard. The output can then source or sink currents far above the quiescent current, so slewing is not limited by the bias current.\n\n*Example:* V_DD = 1.8 V, V_TH = 0.5 V, λ = 0.1 V⁻¹, symmetric sizing. This gives:\n- V_M = 0.9 V and V_ov = 0.4 V.\n- |A_v| = 50 (about 34 dB), but only for 0.4 V < V_out < 1.4 V.\n- That output range corresponds to only about 20 mV of input range.\n\n## 4. Frequency response and noise\n\nTake a load C_L (including C_DB1 + C_DB2), C_GD = C_GD1 + C_GD2, and an ideal input source:\n\n$$A_v(s)=-\\frac{(g_{m1}+g_{m2}-sC_{GD})(r_{o1}\\parallel r_{o2})}{1+s(r_{o1}\\parallel r_{o2})(C_L+C_{GD})}$$\n\n- **Pole and zero.** There is a single pole at 1/[(r_o1 ∥ r_o2)(C_L + C_GD)] and a right-half-plane zero at (g_m1 + g_m2)/C_GD.\n- **Bandwidth.** The gain-bandwidth product is GBW ≈ (g_m1 + g_m2)/(C_L + C_GD).\n- **Input capacitance.** It is Miller-multiplied: C_in ≈ C_GS1 + C_GS2 + (1 + |A_v|)C_GD.\n\n**Thermal noise.** Both devices inject noise, but both also provide gain:\n\n$$\\overline{V^2_{n,in}}=\\frac{4kT\\gamma(g_{m1}+g_{m2})}{(g_{m1}+g_{m2})^2}=\\frac{4kT\\gamma}{g_{m1}+g_{m2}}$$\n\nFor a current-source-loaded CS stage the result is 4kTγ(g_m1 + g_m2)/g_m1². With g_m1 = g_m2, the inverter has 4× (6 dB) lower noise power.\n\n## 5. Drawbacks\n\n1. **The bias point is ill-defined open loop.** Because the gain is high, a few mV of offset, threshold variation, or V_DD drift pushes V_out to a rail. In practice the inverter is biased with negative feedback. One option is a large resistor from V_out to V_in, which self-biases it at V_in = V_out = V_M (with the input AC-coupled). Another is to use it inside a closed loop.\n\n2. **The bias current depends strongly on supply, threshold, and temperature.** In the symmetric case $I_D=\\tfrac{\\beta}{2}(V_{DD}/2-V_{TH})^2$. In the example above, a 10% rise in V_DD increases I_D by about 50%.\n\n3. **Supply rejection is poor.** With v_in = 0 (AC), any supply ripple directly changes V_SG2:\n\n$$\\frac{v_{out}}{v_{dd}}=\\Big(g_{m2}+\\frac{1}{r_{o2}}\\Big)(r_{o1}\\parallel r_{o2})=\\frac{(1+g_{m2}r_{o2})\\,r_{o1}}{r_{o1}+r_{o2}}\\approx g_{m2}(r_{o1}\\parallel r_{o2})$$\n\n$$\\text{PSRR}=\\frac{A_v}{A_{dd}}\\approx 1+\\frac{g_{m1}}{g_{m2}}\\approx 2\\;(\\approx 6\\text{ dB})$$\n\nSupply noise is therefore amplified almost as much as the signal. The circuit needs a clean supply or a (pseudo-)differential arrangement.\n\n**Summary:** The circuit works as a rail-to-rail CMOS inverter with no static power. Biased at V_M, it is a high-gain, low-noise, current-efficient amplifier with $A_v=-(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})$, about twice a CS stage with a current-source load. Its weaknesses are a bias point and current that depend on V_DD and V_TH, poor PSRR, and the need for feedback to set the operating point.",
        "format": "markdown",
        "sha256": "049774ca64c5feadc5dd45efe48c637839ea4cb8b97bee5305b1eabc51dd1594"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the standard CMOS inverter with an NMOS pull-down and PMOS pull-up. Its supplemental analysis is consistent with the inverter’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 28153,
        "total_tokens": 28479,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24847,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 28153,
        "total_tokens": 28479,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24847,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Two-NMOS Circuit with Tied Gates\n\n**Circuit description**\n\n- Both transistors are NMOS and both gates are driven by $V_{in}$.\n- M1 is a source follower from $V_{DD}$.\n- M2 is a pull-down device whose gate is also driven by $V_{in}$.\n- Nothing loads the output, so $I_{D1}=I_{D2}=I$.\n\n**Assumptions:** square-law devices with equal $V_{TH}$ and $\\lambda=\\gamma=0$ (relaxed in Section 5). I use $\\beta_{1,2}=\\mu_nC_{ox}(W/L)_{1,2}$ and $V_{ov}=V_{in}-V_{TH}$.\n\n---\n\n## 1. Regions of operation\n\n**$V_{in}<V_{TH}$:** M2 is off. M1 would conduct only if $V_{out}<V_{in}-V_{TH}<0$. So both devices are off and $V_{out}\\approx 0$.\n\n**$V_{in}>V_{TH}$:**\n\n- **M1 is saturated.** The saturation margin is\n$$V_{DS1}-(V_{GS1}-V_{TH})=(V_{DD}-V_{out})-(V_{in}-V_{out}-V_{TH})=V_{DD}-V_{in}+V_{TH}>0.$$\n This holds for all $V_{in}<V_{DD}+V_{TH}$.\n- **M2 must be in triode.** For M1 to carry current, $V_{in}-V_{out}>V_{TH}$. This is the same as $V_{DS2}=V_{out}<V_{in}-V_{TH}=V_{GS2}-V_{TH}$.\n - In other words, the two devices carry the same current, but M2 has the larger $V_{GS}$, so it must sit at a small $V_{DS}$.\n - Assuming \"both saturated\" is impossible.\n\n## 2. Large-signal characteristic\n\nThe two device equations are:\n\n$$\\text{M1: } I=\\tfrac{\\beta_1}{2}(V_{ov}-V_{out})^2$$\n\n$$\\text{M2: } I=\\beta_2\\Big[V_{ov}V_{out}-\\tfrac{V_{out}^2}{2}\\Big]=\\tfrac{\\beta_2}{2}\\Big[V_{ov}^2-(V_{ov}-V_{out})^2\\Big]$$\n\nEquating them gives\n\n$$(\\beta_1+\\beta_2)(V_{ov}-V_{out})^2=\\beta_2V_{ov}^2 .$$\n\nTaking the root with $V_{out}<V_{ov}$ (the other root would turn M1 off):\n\n$$\\boxed{V_{out}=(V_{in}-V_{TH})\\left(1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\\right)}$$\n\nAlthough both devices are square-law, **$V_{out}$ is a linear function of $V_{in}$**.\n\n- The characteristic is zero up to $V_{TH}$, then a straight line.\n- For identical devices, $V_{out}=(1-1/\\sqrt2)(V_{in}-V_{TH})\\approx0.29\\,(V_{in}-V_{TH})$.\n\nThe supply current is\n\n$$I=\\frac12\\,\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}\\,(V_{in}-V_{TH})^2 .$$\n\n## 3. Physical picture\n\nWith their gates tied, M1 and M2 behave as **one transistor**:\n\n- Its $\\beta_{eq}=(\\beta_1^{-1}+\\beta_2^{-1})^{-1}$. For equal widths, this means a length of $L_1+L_2$; the \"squares\" add like series resistors.\n- Its drain is at $V_{DD}$, so it is saturated.\n- $V_{out}$ is simply the channel potential at the point where M2 ends.\n\nFor a saturated channel, the potential at distance $y$ from the source is $V(y)=V_{ov}\\big[1-\\sqrt{1-y/L}\\big]$. This is proportional to the overdrive, which explains the linearity.\n\n## 4. Small-signal behavior\n\nDefine $a=\\sqrt{\\beta_2/(\\beta_1+\\beta_2)}$. At the operating point:\n\n$$g_{m1}=\\beta_1(V_{ov}-V_{out})=\\beta_1aV_{ov},\\qquad g_{m2}=\\beta_2V_{out}=\\beta_2(1-a)V_{ov}\\ \\text{(triode)},$$\n$$g_{ds2}=1/R_{on2}=\\beta_2(V_{ov}-V_{out})=\\beta_2aV_{ov}$$\n\nKCL at the output gives $g_{m1}(v_{in}-v_{out})=g_{m2}v_{in}+g_{ds2}v_{out}$. Therefore\n\n$$A_v=\\frac{g_{m1}-g_{m2}}{g_{m1}+g_{ds2}}=1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}$$\n\n**Properties of the gain**\n\n- It matches the large-signal slope and is independent of bias, $\\mu_nC_{ox}$ and $V_{DD}$. It depends only on the size ratio.\n- It is the sum of two paths:\n - a follower path (M1 driving $R_{on2}$);\n - an inverting common-source path through M2, which subtracts.\n- The gain is always less than 1. It approaches 1 only as $\\beta_1/\\beta_2\\to\\infty$.\n\n**Design rule:** $\\beta_1/\\beta_2=(1-A_v)^{-2}-1$. For example, $A_v=0.5$ requires $(W/L)_1=3(W/L)_2$.\n\n**Output and input impedance**\n\n$$R_{out}=\\frac{1}{g_{m1}+g_{ds2}}=\\frac{1}{(V_{in}-V_{TH})\\sqrt{\\beta_2(\\beta_1+\\beta_2)}}$$\n\nThe input is purely capacitive.\n\n## 5. Second-order effects\n\n- **Body effect of M1** (its source sits at $V_{out}$):\n - The gain becomes $A_v=(g_{m1}-g_{m2})/(g_{m1}+g_{mb1}+g_{ds2})$.\n - The gain drops, roughly by $1/n$, and the characteristic becomes slightly nonlinear.\n - This is avoided if M1's bulk is tied to its source in a separate p-well.\n- **Channel-length modulation:** adds $1/r_{o1}$ to the denominator of the gain and introduces a slight dependence on $V_{DD}$.\n- **Subthreshold region** ($V_{in}\\lesssim V_{TH}$): $V_{out}\\approx V_T\\ln(1+\\beta_1/\\beta_2)$, independent of $V_{in}$. This is about 18 mV for equal sizes.\n- **Valid range:** the linear behavior holds for $V_{TH}<V_{in}\\le V_{DD}$, because M1 enters triode only if $V_{in}>V_{DD}+V_{TH}$.\n- **Dynamics:** with a load capacitance $C_L$ and feedforward capacitance $C_F=C_{GS1}+C_{GD2}$,\n$$H(s)=\\frac{g_{m1}-g_{m2}+sC_F}{g_{m1}+g_{ds2}+s(C_F+C_L)} .$$\n\n## Bottom line\n\nThe circuit is a self-cascode (composite transistor) tapped at its internal node.\n\n- It acts as a high-input-impedance, linear level shifter/attenuator.\n- Its output is a fixed fraction, $1-\\sqrt{\\beta_2/(\\beta_1+\\beta_2)}$, of the overdrive $V_{in}-V_{TH}$. This fraction is about 0.29 for identical devices.\n- M1 is always saturated and M2 is always in triode.",
        "format": "markdown",
        "sha256": "807bce3c2b4c0fd2dc41f9799b2535d7df8736077bcc99deb2e7302ff5636106"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes M1 as a source follower and M2 as a pull-down, and concludes the circuit is a positive-gain attenuator rather than a normal CMOS inverter, meeting the full-credit rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 28344,
        "total_tokens": 28670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25613,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 28344,
        "total_tokens": 28670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25613,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Two-NMOS Stack with Tied Gates\n\n## Circuit overview\n\nM1 and M2 are in series between V_DD and ground, so they carry the **same drain current**. Both gates are driven by V_in, so the input acts on the output in two opposite ways:\n\n- **M1** (drain at V_DD, source at V_out) is a source follower. Raising V_in pushes V_out **up**.\n- **M2** (source grounded, drain at V_out) is a pull-down. Raising V_in pulls V_out **down**.\n\nV_out settles where the two currents are equal. The key question is which region each transistor operates in.\n\n## 1. Regions of operation\n\n**V_in < V_TH:** Both devices are off. V_out sits near ground, held a few kT/q above it by subthreshold conduction. The weak-inversion model gives V_out ≈ (kT/q)·ln[1 + (W/L)₁/(W/L)₂], about 18 mV for equal devices.\n\n**V_in > V_TH:**\n\n- **M2 is always in triode.**\n  - For M1 to conduct: V_GS1 = V_in − V_out > V_TH, so V_out < V_in − V_TH.\n  - For M2, V_DS2 = V_out and V_GS2 − V_TH = V_in − V_TH.\n  - The first condition is therefore V_DS2 < V_GS2 − V_TH. This holds for any device sizes. Body effect raises V_TH1 and only reinforces it.\n- **M1 is always saturated.** Saturation requires V_DD − V_out ≥ V_in − V_out − V_TH, i.e. V_in ≤ V_DD + V_TH, which always holds.\n\n## 2. Large-signal transfer characteristic\n\nAssume the square law with γ = λ = 0, and let V_ov = V_in − V_TH. Equating the two currents:\n\n$$\\tfrac12\\mu_nC_{ox}\\left(\\tfrac{W}{L}\\right)_1(V_{ov}-V_{out})^2=\\mu_nC_{ox}\\left(\\tfrac{W}{L}\\right)_2\\left[V_{ov}V_{out}-\\tfrac12V_{out}^2\\right]$$\n\nUse the identity 2V_ov·V_out − V_out² = V_ov² − (V_ov − V_out)²:\n\n$$\\left[\\left(\\tfrac{W}{L}\\right)_1+\\left(\\tfrac{W}{L}\\right)_2\\right](V_{ov}-V_{out})^2=\\left(\\tfrac{W}{L}\\right)_2V_{ov}^2$$\n\n$$\\boxed{V_{out}=(V_{in}-V_{TH})\\left[1-\\sqrt{\\frac{(W/L)_2}{(W/L)_1+(W/L)_2}}\\right]\\equiv\\beta\\,(V_{in}-V_{TH})}$$\n\nThe other root would put V_out above V_in − V_TH, which turns M1 off, so it is rejected.\n\nThe supply current is:\n\n$$I_D=\\tfrac12\\mu_nC_{ox}\\,\\frac{(W/L)_1(W/L)_2}{(W/L)_1+(W/L)_2}\\,(V_{in}-V_{TH})^2$$\n\n**Interpretation:** This is exactly the current of one transistor whose W/L is the \"series combination\" of the two.\n- M1 and M2 together behave as a single long, saturated transistor, the so-called self-cascode or composite device.\n- Pinch-off occurs in M1, while M2 forms the triode source end of the channel.\n- V_out is simply the channel potential at the junction point. For equal widths, β = 1 − √(L₁/(L₁+L₂)).\n\n```\nVout\n ^\n |                                 ● β(VDD−VTH)\n |                            .\n |                       .       slope = β (constant)\n |                  .\n |             .\n +-----------●------------------------+--> Vin\n 0          VTH                      VDD\n```\n\n## 3. Small-signal analysis\n\nThe two devices use different small-signal models:\n- **M1 (saturated):** g_m1, g_mb1, r_o1.\n- **M2 (triode):** g_m2 = μₙC_ox(W/L)₂·V_out and g_ds2 = μₙC_ox(W/L)₂·(V_in − V_TH − V_out).\n\nKCL at the output gives:\n\n$$g_{m1}(v_{in}-v_{out})-g_{mb1}v_{out}-\\frac{v_{out}}{r_{o1}}=g_{m2}v_{in}+g_{ds2}v_{out}$$\n\n$$A_v=\\frac{g_{m1}-g_{m2}}{g_{m1}+g_{mb1}+g_{ds2}+1/r_{o1}}$$\n\nWith γ = λ = 0, substituting the bias values gives:\n\n$$A_v=1-\\sqrt{\\frac{(W/L)_2}{(W/L)_1+(W/L)_2}}=\\beta$$\n\nThis equals the large-signal slope and does not depend on bias, so the stage is linear (in the square-law model). The gain is non-inverting with 0 < A_v < 1.\n\n| (W/L)₁ : (W/L)₂ | A_v |\n|---|---|\n| 1 : 1 | 1 − 1/√2 ≈ 0.29 |\n| 3 : 1 | 0.50 |\n| 8 : 1 | 0.67 |\n\nThe design equation for a target gain is (W/L)₁/(W/L)₂ = 1/(1 − A_v)² − 1.\n\n**Impedances:**\n- R_out = 1/(g_m1 + g_mb1 + g_ds2 + 1/r_o1). This is low, like a follower.\n- The input is purely capacitive.\n\n## 4. Second-order effects\n\n- **Body effect:** V_TH1 rises with V_out. This lowers the gain through the g_mb1 term and makes the characteristic slightly nonlinear.\n- **Channel-length modulation:** It adds 1/r_o1 to the denominator and gives V_out a small dependence on V_DD.\n- **Capacitance:** Because 0 < A_v < 1, C_GS1 and the drain-side part of M2's gate capacitance are bootstrapped by (1 − A_v).\n\n## 5. Common pitfall\n\nIf you assume M2 is saturated, you get A_v = 1 − √((W/L)₂/(W/L)₁). That predicts zero gain for identical devices and negative gain when (W/L)₂ > (W/L)₁. It is wrong, because M2 can never be saturated while M1 conducts.\n\n## Summary\n\nThe circuit is a **non-inverting, attenuating level shifter**:\n- V_out = β(V_in − V_TH), with 0 < β < 1.\n- β is set purely by the size ratio.\n- Output impedance is low.\n- Static current is I_D = ½μₙC_ox(W/L)_eq(V_in − V_TH)².",
        "format": "markdown",
        "sha256": "875c48482b36b32203f69ce2c25e5c09d3bbef8081bb5c5a8bd4f5d929d4b5f6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes M1 as a source-follower pull-up and M2 as a pull-down, and concludes the circuit is a non-inverting attenuator rather than a normal CMOS inverter. The golden solution’s full-credit rule is satisfied.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 23006,
        "total_tokens": 23332,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20662,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 23006,
        "total_tokens": 23332,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20662,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Two-NMOS Stack (Source Follower over a Triode Pull-Down)\n\n## The circuit\n\nBoth transistors are NMOS and both gates are driven by $V_{in}$.\n\n- **M1**: drain at $V_{DD}$, source at $V_{out}$. It is a source follower.\n- **M2**: source at ground, drain at $V_{out}$. It is a pull-down device driven by the same input.\n\nAlthough it looks like an inverter, it is not one. As $V_{in}$ rises, M1 pushes $V_{out}$ up and M2 pulls it down. M1 wins, so the stage is **non-inverting with gain less than 1**.\n\n---\n\n## 1. Regions of operation\n\n**$V_{in} < V_{TH}$:** M2 is off. Since $V_{out} \\ge 0$, we have $V_{GS1} = V_{in} - V_{out} < V_{TH}$, so M1 is off too.\n- Therefore $V_{out} \\approx 0$.\n- Only subthreshold current flows. For identical devices, $V_{out}$ settles at about $V_T\\ln 2 \\approx 18$ mV.\n\n**$V_{in} > V_{TH}$:**\n- **M1 is saturated.** The condition $V_{DD}-V_{out} \\ge V_{in}-V_{out}-V_{TH}$ reduces to $V_{in}\\le V_{DD}+V_{TH}$, which is always satisfied.\n- **M2 must be in triode.** For M1 to conduct, $V_{out} < V_{in}-V_{TH}$. That is the same as $V_{DS2} < V_{GS2}-V_{TH}$.\n\n---\n\n## 2. Large-signal characteristic\n\nThis uses the square-law model and neglects $\\lambda$ and body effect. Define:\n- $V_{ov}=V_{in}-V_{TH}$\n- $K_i=\\mu_nC_{ox}(W/L)_i$\n- $\\alpha=K_1/K_2$\n\nThe two drain currents are:\n\n$$I_{D1}=\\tfrac12K_1(V_{ov}-V_{out})^2$$\n\n$$I_{D2}=K_2\\!\\left[V_{ov}V_{out}-\\tfrac12V_{out}^2\\right]=\\tfrac12K_2\\left[V_{ov}^2-(V_{ov}-V_{out})^2\\right]$$\n\nSetting $I_{D1}=I_{D2}$ gives $(1+\\alpha)(V_{ov}-V_{out})^2=V_{ov}^2$. Therefore:\n\n$$\\boxed{V_{out}=\\left(1-\\frac{1}{\\sqrt{1+\\alpha}}\\right)(V_{in}-V_{TH})}$$\n\nFor identical transistors ($\\alpha=1$):\n\n$$V_{out}=\\left(1-\\tfrac{1}{\\sqrt2}\\right)(V_{in}-V_{TH})\\approx 0.29\\,(V_{in}-V_{TH})$$\n\nThe resulting transfer curve looks like this:\n\n```\nVout\n ^                                   . ← 0.29(VDD−VTH)\n |                              .\n |                         .     slope = 1 − 1/√2 ≈ 0.29\n |                    .\n |               .\n |__________ .\n +----------+------------------------+--> Vin\n           VTH                      VDD\n```\n\n**Key points:**\n- Above threshold, the characteristic is a straight line. Both I–V equations are homogeneous quadratics in $V_{ov}$ and $V_{out}$, so $V_{out}/V_{ov}$ must be a constant.\n- The supply current is $I_D=\\tfrac12\\frac{K_1K_2}{K_1+K_2}(V_{in}-V_{TH})^2$. For identical devices this is $K/4\\cdot(V_{in}-V_{TH})^2$.\n\n---\n\n## 3. Small-signal analysis\n\nThe small-signal parameters are:\n- M1 (saturated): $g_{m1}$ and $g_{mb1}$.\n- M2 (triode): transconductance $g_{m2}=K_2V_{out}$ and channel conductance $1/R_{on2}=K_2(V_{ov}-V_{out})$.\n\nKCL at the output node:\n\n$$g_{m1}(v_{in}-v_{out})-g_{mb1}v_{out}=g_{m2}v_{in}+\\frac{v_{out}}{R_{on2}}$$\n\nSolving for the gain:\n\n$$A_v=\\frac{g_{m1}-g_{m2}}{g_{m1}+g_{mb1}+1/R_{on2}}$$\n\nFor identical devices with no body effect:\n- $g_{m1}=1/R_{on2}=KV_{ov}/\\sqrt2$\n- $g_{m2}=KV_{ov}(1-1/\\sqrt2)$\n\nSubstituting gives\n\n$$A_v = 1-\\tfrac{1}{\\sqrt2}\\approx0.29$$\n\nIn general, $A_v = 1-1/\\sqrt{1+\\alpha}$.\n\n- The gain is **independent of bias**, which agrees with the slope of the large-signal curve.\n- The output resistance is $R_{out}=1/(g_{m1}+g_{mb1}+1/R_{on2})\\approx 1/(2g_{m1})$.\n- Since $g_{m1}>g_{m2}$ always, the gain is positive: the follower's push beats M2's pull.\n\n---\n\n## 4. Physical interpretation\n\nTwo series transistors with a common gate behave like one MOSFET of length $L_1+L_2$. This is the \"self-cascode\" or composite transistor. $V_{out}$ is the channel potential at the point where the two devices join.\n\nFor a saturated square-law device, the channel potential at distance $x$ from the source is\n\n$$V(x)=V_{ov}\\left[1-\\sqrt{1-x/L}\\right]$$\n\nAt the midpoint ($x = L/2$) this gives $(1-1/\\sqrt2)V_{ov}$, which matches the result above.\n\n---\n\n## 5. Second-order effects\n\n- **Body effect** (M1 has $V_{SB}=V_{out}$): the slope drops to roughly $0.29/n \\approx 0.2$–$0.25$, where $n$ is the slope factor. It also adds slight nonlinearity.\n- **Channel-length modulation:** adds $1/r_{o1}$ to the denominator of $A_v$, a small reduction.\n- **Velocity saturation and mobility degradation:** these break the square-law homogeneity, so the characteristic becomes somewhat nonlinear.\n\n---\n\n## Summary\n\nThe circuit is a **non-inverting linear attenuator / level shifter**:\n\n- $V_{out}\\approx 0$ for $V_{in}<V_{TH}$.\n- $V_{out}\\approx 0.29\\,(V_{in}-V_{TH})$ for identical devices above threshold.\n- The gain $1-1/\\sqrt{1+(W/L)_1/(W/L)_2}$ depends only on a device-size ratio. It approaches a pure follower as M1 becomes much stronger than M2, and approaches zero as M1 becomes much weaker.",
        "format": "markdown",
        "sha256": "bbc35027ff8a15542792c6ac8334d6253f13cf0821276b63cf2b389c936c3a3a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper source-follower and lower pull-down actions, and concludes the circuit is not a normal CMOS inverter, satisfying the full-credit rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 25415,
        "total_tokens": 25741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22990,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 326,
        "output_tokens": 25415,
        "total_tokens": 25741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22990,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# CS Amplifier with a Diode-Connected PMOS Load\n\n## Circuit description\n\n- **M1** (NMOS) is a common-source amplifying device. Its gate is the input and its drain is the output.\n- **M2** (PMOS) has its gate tied to its drain, so it is **diode-connected**. It acts as a two-terminal load of about 1/g_m2.\n- M2's source (and n-well) is at V_DD, so V_SB2 = 0. M2 therefore has **no body effect**.\n- **M2 is always saturated** when it conducts, because V_SD2 = V_SG2 > V_SG2 − |V_TH2|.\n\nBelow, A = √[μn(W/L)₁ / μp(W/L)₂].\n\n---\n\n## 1. Large-signal (DC) transfer characteristic\n\n**Region I: V_in < V_TH1.** M1 is off, so I_D ≈ 0. M2 is then at the edge of conduction:\n\n$$V_{out}\\approx V_{DD}-|V_{TH2}|$$\n\nSubthreshold conduction in M2 lets V_out creep slowly higher toward V_DD.\n\n**Region II: M1 and M2 both saturated.** Set the two drain currents equal:\n\n$$\\tfrac12\\mu_nC_{ox}\\left(\\tfrac WL\\right)_1(V_{in}-V_{TH1})^2=\\tfrac12\\mu_pC_{ox}\\left(\\tfrac WL\\right)_2(V_{DD}-V_{out}-|V_{TH2}|)^2$$\n\nTaking the square root of both sides:\n\n$$V_{out}=V_{DD}-|V_{TH2}|-\\sqrt{\\frac{\\mu_n(W/L)_1}{\\mu_p(W/L)_2}}\\;(V_{in}-V_{TH1})$$\n\nThis is a **straight line** of slope −A. The reason is that M1 converts V_in into a current with a square law, and M2 converts that current back into a voltage with a square-root law. The two nonlinearities cancel.\n\n**Region III: M1 in triode.** M1 leaves saturation when V_out = V_in − V_TH1. That happens at\n\n$$V_{in,B}=V_{TH1}+\\frac{V_{DD}-|V_{TH2}|}{1+A},\\qquad V_{out,B}=\\frac{V_{DD}-|V_{TH2}|}{1+A}$$\n\nBeyond this point the slope decreases, and V_out falls toward a small value set by M1's on-resistance.\n\n```\nVout\n ^\n |-----------.          <- VDD-|VTH2|  (M1 off)\n |            \\\n |             \\        <- slope = -A  (both saturated, linear)\n |              \\\n |               \\.\n |                 '--.___   <- M1 in triode\n |                        '----.....\n +-----------+------+-------------------> Vin\n           VTH1   Vin,B\n```\n\n---\n\n## 2. Small-signal analysis\n\nThe diode-connected M2 looks like an impedance (1/g_m2) ∥ r_o2. Therefore:\n\n$$A_v=-g_{m1}\\left(\\frac{1}{g_{m2}}\\,\\Big\\|\\,r_{o1}\\,\\Big\\|\\,r_{o2}\\right)\\approx-\\frac{g_{m1}}{g_{m2}}$$\n\nBoth devices carry the same I_D, and g_m = √(2μC_ox(W/L)I_D). This gives\n\n$$A_v\\approx-\\sqrt{\\frac{\\mu_n(W/L)_1}{\\mu_p(W/L)_2}}$$\n\nThis agrees with the large-signal slope. Alternatively, using g_m = 2I_D/V_ov:\n\n$$|A_v|=\\frac{|V_{GS2}|-|V_{TH2}|}{V_{GS1}-V_{TH1}}=\\frac{|V_{ov2}|}{V_{ov1}}$$\n\nThe terminal resistances are:\n- **Input resistance:** R_in → ∞, since the input drives a MOS gate.\n- **Output resistance:** R_out = (1/g_m2) ∥ r_o1 ∥ r_o2 ≈ 1/g_m2, which is relatively low.\n\n---\n\n## 3. Key properties and trade-offs\n\n1. **Good linearity.** The gain depends only on device-size and mobility ratios. It does not depend on bias current or signal level. By contrast, a resistor-loaded stage has gain g_m1R_D ∝ (V_in − V_TH1).\n\n2. **Well-defined output bias.** The output DC level is V_out = V_DD − |V_GS2|. No high-impedance node needs extra biasing, as a current-source load would.\n\n3. **No body effect.** An NMOS diode load would instead give A_v = −(g_m1/g_m2)/(1+η).\n\n4. **Achievable gain is low.**\n   - For |A_v| = 10 you need μn(W/L)₁ = 100·μp(W/L)₂, so (W/L)₁ ≈ 30–50·(W/L)₂.\n   - That means a very wide M1, with large input capacitance, or a very long M2.\n\n5. **Gain–headroom trade-off.**\n   - The gain sets the load overdrive: |V_ov2| = |A_v|·V_ov1.\n   - Example: |A_v| = 10 with V_ov1 = 0.2 V requires |V_ov2| = 2 V, so |V_GS2| ≈ 2.4 V.\n   - The output bias V_DD − |V_GS2| then falls so low that M1 can barely stay saturated (it needs V_out ≥ V_ov1).\n   - In practice this limits the stage to |A_v| of roughly 2–5.\n   - Common remedies are a current source in parallel with M2 or a current-source load.\n\n6. **Poor supply rejection.**\n   - For a fixed V_in, I_D is fixed, so V_out = V_DD − |V_GS2| follows V_DD.\n   - The supply-to-output gain is v_out/v_dd = r_o1/[r_o1 + (1/g_m2 ∥ r_o2)] ≈ 1.\n\n---\n\n## 4. Frequency behavior (brief)\n\n- **Output pole:** ω_p,out ≈ g_m2 / C_out.\n  - C_out ≈ C_DB1 + C_GD1 + C_GS2 + C_DB2 + C_L.\n  - C_GD2 does not appear because M2's gate and drain are shorted together.\n- **Input capacitance (Miller effect):** C_in ≈ C_GS1 + (1 + g_m1/g_m2)·C_GD1.\n- **Gain-bandwidth product:** GBW ≈ g_m1 / C_out.\n\n---\n\n**Summary:** This is a common-source stage whose diode-connected PMOS load acts as a 1/g_m2 resistor. Its gain is A_v ≈ −g_m1/g_m2 = −√[μn(W/L)₁/μp(W/L)₂], and its output resistance is about 1/g_m2. It is quite linear and easy to bias, but the gain is modest and is traded against voltage headroom.",
        "format": "markdown",
        "sha256": "f2cc9fa8f6583bb8dfcc4a06d27cd7d7f5872d246319f3a8bcec2b1e9e36bcad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both output resistances included, along with the ideal −gm1/gm2 form. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 794,
        "output_tokens": 17652,
        "total_tokens": 18446,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15239,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 794,
        "output_tokens": 17652,
        "total_tokens": 18446,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15239,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# CS Amplifier with a Diode-Connected PMOS Load\n\n## Topology\n\n- **M1 (NMOS)** is the input device. It converts $V_{in}$ into a drain current.\n- **M2 (PMOS)** has its gate tied to its drain, so it is a diode-connected load.\n  - Because $V_{SD2}=V_{SG2}>V_{SG2}-|V_{TH2}|$, M2 is **always in saturation** whenever it conducts.\n  - It acts like a resistor with small-signal value $(1/g_{m2})\\parallel r_{o2}\\approx 1/g_{m2}$.\n  - Its source and n-well are both at $V_{DD}$, so there is **no body effect**.\n\nFor convenience, define\n\n$$A\\equiv\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n---\n\n## 1. Large-signal transfer characteristic (square law, λ = 0)\n\n**(a) $V_{in}<V_{TH1}$:** M1 is off and $I_D=0$, so $V_{SG2}\\to|V_{TH2}|$:\n$$V_{out}=V_{DD}-|V_{TH2}|$$\nThe output never reaches $V_{DD}$. In practice, subthreshold leakage lets it creep slightly higher.\n\n**(b) M1 and M2 both saturated:** set the two drain currents equal:\n$$\\tfrac12\\mu_nC_{ox}(W/L)_1(V_{in}-V_{TH1})^2=\\tfrac12\\mu_pC_{ox}(W/L)_2(V_{DD}-V_{out}-|V_{TH2}|)^2$$\n$$\\Rightarrow\\quad V_{out}=V_{DD}-|V_{TH2}|-A\\,(V_{in}-V_{TH1})$$\nThis is a **straight line**, so the gain is constant over this region.\n\n**(c) M1 enters triode** when $V_{out}=V_{in}-V_{TH1}$:\n$$V_{in,B}=V_{TH1}+\\frac{V_{DD}-|V_{TH2}|}{1+A},\\qquad V_{out,B}=\\frac{V_{DD}-|V_{TH2}|}{1+A}$$\nBeyond this point the slope magnitude falls. $V_{out}$ approaches a small but nonzero value, set by M1's on-resistance against the diode load.\n\n```\nVout\n ^\n |__________          <- VDD-|VTH2|  (M1 off)\n |          \\\n |           \\        slope = -A  (both saturated: linear)\n |            \\\n |             o      <- Vout,B  (M1 enters triode)\n |              '--.__\n |                    ''''------   (M1 triode)\n +-----------+-----+---------------> Vin\n           VTH1   Vin,B\n```\n\n---\n\n## 2. Small-signal analysis (biased in region b)\n\nM2's gate and drain both sit at $v_{out}$, and its source is at ac ground. KCL at the output gives\n$$-(g_{m2}+g_{o2})\\,v_{out}=g_{m1}v_{in}+g_{o1}v_{out}$$\n\n$$\\boxed{A_v=-g_{m1}\\left(\\frac{1}{g_{m2}}\\parallel r_{o1}\\parallel r_{o2}\\right)\\approx-\\frac{g_{m1}}{g_{m2}}=-\\sqrt{\\frac{\\mu_n(W/L)_1}{\\mu_p(W/L)_2}}=-\\frac{|V_{ov2}|}{V_{ov1}}}$$\n\nThis matches the slope found in the large-signal analysis.\n\n- Input resistance: $R_{in}\\to\\infty$.\n- Output resistance: $R_{out}=(1/g_{m2})\\parallel r_{o1}\\parallel r_{o2}\\approx 1/g_{m2}$.\n\n---\n\n## 3. Key properties and trade-offs\n\n1. **Linear gain.** $A_v$ does not depend on the bias current or on the input/output level.\n   - The characteristic is therefore quite linear (to the extent the square law holds).\n   - An NMOS diode load would suffer body effect, giving $A_v=-(g_{m1}/g_{m2})/(1+\\eta)$ with $\\eta$ varying as $V_{out}$ changes. The PMOS load avoids this.\n2. **Low gain.** Gain grows only as the square root of the device ratio.\n   - $|A_v|=10$ requires $\\mu_n(W/L)_1/\\mu_p(W/L)_2=100$, i.e. $(W/L)_1\\approx30$–$50\\,(W/L)_2$.\n   - Such ratios mean large devices and large capacitances.\n3. **Gain vs. headroom/swing.** Since $|V_{ov2}|=|A_v|V_{ov1}$:\n   $$V_{out,Q}=V_{DD}-|V_{TH2}|-|A_v|V_{ov1}\\ \\ge V_{ov1}\\ \\Rightarrow\\ V_{DD}\\ge|V_{TH2}|+(1+|A_v|)V_{ov1}$$\n   - Example: $|A_v|=10$, $V_{ov1}=0.2$ V, $|V_{TH2}|=0.4$ V gives $V_{SG2}=2.4$ V.\n   - With $V_{DD}=3$ V, $V_{out,Q}=0.6$ V, leaving only 0.4 V of downward swing before M1 leaves saturation.\n   - Practical gains are therefore only about 2–5.\n4. **Well-defined bias.** The output node has low impedance ($\\approx1/g_{m2}$), so its DC level is robust. A current-source load, by contrast, leaves the output DC level highly sensitive to small current mismatches.\n\n---\n\n## 4. Frequency response\n\n- **Output pole.** Because the load resistance is only $\\approx 1/g_{m2}$, this pole sits at a high frequency:\n  $$\\omega_{p,out}\\approx\\frac{g_{m2}}{C_{DB1}+C_{GD1}(1+1/|A_v|)+C_{GS2}+C_{DB2}+C_L}$$\n  $C_{GD2}$ does not appear because M2's gate and drain are shorted.\n- **Gain-bandwidth:** $\\approx g_{m1}/C_{out}$.\n- **Input pole** (with source resistance $R_S$): $\\omega_{p,in}\\approx 1/\\{R_S[C_{GS1}+(1+g_{m1}/g_{m2})C_{GD1}]\\}$.\n- **Zero:** a right-half-plane zero at $g_{m1}/C_{GD1}$.\n\nThe result is a wideband, low-gain stage, which is why it is used in preamps and limiting amplifiers.\n\n## 5. Noise and supply rejection\n\n- **Input-referred thermal noise:**\n  $$\\overline{V^2_{n,in}}=\\frac{4kT\\gamma}{g_{m1}}\\left(1+\\frac{g_{m2}}{g_{m1}}\\right)=\\frac{4kT\\gamma}{g_{m1}}\\left(1+\\frac{1}{|A_v|}\\right)$$\n  The load adds significant noise when the gain is low.\n- **Supply rejection:** $v_{out}/v_{dd}=(g_{m2}+g_{o2})/(g_{m2}+g_{o1}+g_{o2})\\approx1$. Supply ripple reaches the output almost unattenuated, so PSRR $\\approx|A_v|$, which is poor.\n\n---\n\n## Summary\n\n| Quantity | Result |\n|---|---|\n| Voltage gain | $-g_{m1}(1/g_{m2}\\parallel r_{o1}\\parallel r_{o2})\\approx-\\sqrt{\\mu_n(W/L)_1/\\mu_p(W/L)_2}$ |\n| $R_{in}$ / $R_{out}$ | $\\infty$ / $\\approx1/g_{m2}$ |\n| Max $V_{out}$ | $V_{DD}-\\lvert V_{TH2}\\rvert$ |\n| Linear input range | $V_{TH1}<V_{in}<V_{TH1}+(V_{DD}-\\lvert V_{TH2}\\rvert)/(1+A)$ |\n| Advantages | Linear, bias-independent gain; no body effect; robust DC level; wide bandwidth |\n| Drawbacks | Low gain; gain–swing trade-off; load noise; poor PSRR |",
        "format": "markdown",
        "sha256": "6f798d95030f8c1f9914610d8c945cf059b8fa042b44117d8a094a58fc42b0be"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS with diode-connected PMOS load and gives the inverting gain including both devices’ output resistances, matching the full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 794,
        "output_tokens": 26483,
        "total_tokens": 27277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23565,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 794,
        "output_tokens": 26483,
        "total_tokens": 27277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23565,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Source Stage with a Diode-Connected PMOS Load\n\n## Circuit identification\n\n- **M1 (NMOS)** is the input device. It converts $V_{in}$ into a drain current.\n- **M2 (PMOS)** has its gate tied to its drain, so it is a *diode-connected load*.\n  - Because $V_{SD2}=V_{SG2}>V_{SG2}-|V_{TH2}|$, M2 is **always in saturation** whenever it conducts.\n  - For small signals it acts as a resistor: applying $v_x$ gives $i_x=g_{m2}v_x+v_x/r_{o2}$, so $R_{load}=\\frac{1}{g_{m2}}\\parallel r_{o2}$.\n- Both transistors carry the same current: $I_{D1}=|I_{D2}|$.\n- M2's source and n-well are at $V_{DD}$, and M1's source and substrate are at ground. So there is **no body effect**.\n\nDefine the shorthand: $A_0\\equiv\\sqrt{\\dfrac{\\mu_n(W/L)_1}{\\mu_p(W/L)_2}}$\n\n---\n\n## 1. Large-signal behavior (square law, λ = 0)\n\n| Input range | M1 | M2 | Output |\n|---|---|---|---|\n| $V_{in}<V_{TH1}$ | off | ≈ off | $V_{out}\\approx V_{DD}-\\lvert V_{TH2}\\rvert$ |\n| $V_{TH1}<V_{in}<V_{in1}$ | saturation | saturation | falls linearly |\n| $V_{in}>V_{in1}$ | triode | saturation | flattens toward a low but non-zero level |\n\n**M1 off:** No current flows, so M2 sits at the edge of conduction and $V_{out}\\approx V_{DD}-|V_{TH2}|$. Subthreshold conduction pushes it a little higher in practice.\n\n**Both saturated:** Equate the two drain currents:\n\n$$\\tfrac12\\mu_nC_{ox}\\left(\\tfrac WL\\right)_1(V_{in}-V_{TH1})^2=\\tfrac12\\mu_pC_{ox}\\left(\\tfrac WL\\right)_2(V_{DD}-V_{out}-|V_{TH2}|)^2$$\n\n$$\\boxed{V_{out}=V_{DD}-|V_{TH2}|-A_0\\,(V_{in}-V_{TH1})}$$\n\nThis is a **straight line**, so the transfer characteristic is linear in this region.\n\n**Edge of triode for M1:** This occurs when $V_{out}=V_{in}-V_{TH1}$:\n\n$$V_{in1}=V_{TH1}+\\frac{V_{DD}-|V_{TH2}|}{1+A_0},\\qquad V_{out1}=\\frac{V_{DD}-|V_{TH2}|}{1+A_0}$$\n\n**M1 in triode:** The output is set by\n\n$$\\mu_nC_{ox}(W/L)_1\\left[(V_{in}-V_{TH1})V_{out}-\\tfrac12 V_{out}^2\\right]=\\tfrac12\\mu_pC_{ox}(W/L)_2(V_{DD}-V_{out}-|V_{TH2}|)^2$$\n\nThe slope shrinks, and $V_{out}$ never reaches 0. The low level is ratioed, as in pseudo-NMOS logic.\n\n```\n Vout\n  ^\n  | VDD-|VTH2|\n  |----------+\n  |           `.        slope = -A0\n  |             `.      (M1, M2 saturated)\n  |               `.\n  |                 `o  <- M1 enters triode\n  |                    `-._\n  |                        `--..______\n  +----------+-------+--------------------> Vin\n           VTH1     Vin1\n```\n\n---\n\n## 2. Small-signal analysis (both devices saturated)\n\nKCL at the output node:\n\n$$g_{m1}v_{in}+\\frac{v_{out}}{r_{o1}}+\\left(g_{m2}+\\frac{1}{r_{o2}}\\right)v_{out}=0$$\n\n$$A_v=-g_{m1}\\left(\\frac{1}{g_{m2}}\\,\\Big\\|\\,r_{o1}\\,\\Big\\|\\,r_{o2}\\right)\\approx-\\frac{g_{m1}}{g_{m2}}$$\n\nThe approximation holds because $1/g_{m2}\\ll r_o$.\n\nSubstituting $g_m=\\sqrt{2\\mu C_{ox}(W/L)I_D}$ with equal currents in both devices:\n\n$$\\boxed{A_v\\approx-\\sqrt{\\frac{\\mu_n(W/L)_1}{\\mu_p(W/L)_2}}=-A_0}$$\n\nThis matches the large-signal slope. Using $g_m=2I_D/V_{ov}$ instead gives an equivalent form:\n\n$$|A_v|=\\frac{|V_{GS2}-V_{TH2}|}{V_{GS1}-V_{TH1}}=\\frac{|V_{ov2}|}{V_{ov1}}$$\n\n**Impedances:**\n- Input resistance: $R_{in}\\to\\infty$ (gate input).\n- Output resistance: $R_{out}=\\frac{1}{g_{m2}}\\parallel r_{o1}\\parallel r_{o2}\\approx\\frac{1}{g_{m2}}$, which is low.\n\n---\n\n## 3. Properties and trade-offs\n\n**Advantages**\n- **Linear, bias-independent gain.** To first order, $A_v$ does not depend on $I_D$ or $V_{in}$, because both $g_m$'s scale as $\\sqrt{I_D}$. By contrast, a resistor-loaded stage has $|A_v|=g_{m1}R_D$, which varies as $V_{in}$ moves.\n- **No body effect.** An NMOS diode load gives $A_v=-\\frac{g_{m1}}{g_{m2}}\\frac{1}{1+\\eta}$, where η varies with $V_{out}$. That gain is lower and slightly nonlinear.\n- **Gain set by a ratio.** Device ratios make the gain fairly well defined. However, it depends on $\\mu_n/\\mu_p$, which does not track perfectly across process corners.\n\n**Limitations**\n- **Low gain, weakly dependent on sizing.** Gain scales only as the square root of the size ratio.\n  - For $|A_v|=10$ you need $\\mu_n(W/L)_1/\\mu_p(W/L)_2=100$, i.e. $(W/L)_1\\approx 30$–$50\\times(W/L)_2$.\n  - That means either a huge M1 (large input capacitance) or a very long M2 (large output capacitance).\n- **Gain versus headroom.** Since $|V_{ov2}|=|A_v|V_{ov1}$:\n  $$V_{out,DC}=V_{DD}-|V_{TH2}|-|A_v|V_{ov1},\\qquad V_{DD}\\ge |V_{TH2}|+(1+|A_v|)V_{ov1}\\ \\text{(to keep M1 saturated)}$$\n- **Worked example.** Take $|A_v|=10$, $V_{ov1}=0.2$ V and $|V_{TH2}|=0.7$ V.\n  - Then $|V_{GS2}|=2.7$ V.\n  - With $V_{DD}=3$ V, the output sits at 0.3 V, only about 0.1 V above M1's triode edge.\n  - There is almost no room for swing, so this stage is used for modest gains (a few V/V).\n- **Common fix.** Put a current source in parallel with M2 so that M2 carries only part of $I_{D1}$.\n  - For example, diverting 75 % of the current halves $g_{m2}$, which doubles the gain.\n  - It also halves $|V_{ov2}|$, easing headroom.\n\n**Other characteristics**\n- **Bandwidth.** The low-impedance output gives a pole at $\\omega_{out}\\approx g_{m2}/C_{out}$.\n  - Here $C_{out}=C_{DB1}+C_{GD1}+C_{GS2}+C_{DB2}+C_L$. $C_{GD2}$ drops out because its gate and drain are the same node.\n  - The gain-bandwidth product is about $g_{m1}/C_{out}$.\n  - Miller multiplication is mild: $C_{in}\\approx C_{GS1}+(1+g_{m1}/g_{m2})C_{GD1}$.\n- **Noise.** The input-referred thermal noise is $\\overline{v_{n,in}^2}\\approx 4kT\\gamma\\left(\\frac{1}{g_{m1}}+\\frac{g_{m2}}{g_{m1}^2}\\right)$, plus flicker noise. The load adds a fraction $1/|A_v|$ of M1's thermal noise, which is significant because the gain is low.\n- **Supply rejection.** The output follows $V_{DD}$ almost 1:1 through $1/g_{m2}$, so PSRR ≈ $|A_v|$, which is poor.\n\n---\n\n## Summary\n\n$$A_v=-g_{m1}\\left(\\tfrac{1}{g_{m2}}\\|r_{o1}\\|r_{o2}\\right)\\approx-\\frac{g_{m1}}{g_{m2}}=-\\sqrt{\\frac{\\mu_n(W/L)_1}{\\mu_p(W/L)_2}}=-\\frac{|V_{ov2}|}{V_{ov1}},\\qquad R_{out}\\approx\\frac{1}{g_{m2}}$$\n\nThe circuit is a linear, well-defined, wideband amplifier, but its gain is low. Raising the gain requires large device ratios and a large $V_{SG2}$, which uses up output headroom and swing.",
        "format": "markdown",
        "sha256": "511b41fe9dd43af09a10a879e412a879c65ddb5079d74a89fa59bacc368d7c62"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both output resistances included, plus the valid −gm1/gm2 approximation.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 794,
        "output_tokens": 30793,
        "total_tokens": 31587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27437,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 794,
        "output_tokens": 30793,
        "total_tokens": 31587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27437,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the All-PMOS Common-Source Stage with a Diode-Connected Load\n\n## 1. Identifying the topology\n\n- **M2 (PMOS):** source at V_DD, gate at V_in, drain at V_out. It is the **common-source input device**.\n- **M1 (PMOS):** source at V_out, with gate and drain both grounded. Since its gate and drain are tied together, M1 is **diode-connected**:\n  - V_SG1 = V_SD1 = V_out, so M1 is always saturated when it conducts.\n  - The output node sees roughly 1/g_m1.\n\nThe circuit is therefore a common-source amplifier with a diode-connected load, built entirely from PMOS devices. It is the upside-down version of the NMOS CS stage with an NMOS diode load.\n\n**Assumptions:**\n- Square-law devices, with λ ≈ 0 for the DC analysis.\n- V_TH ≡ |V_THP| is the same for both devices. This holds if M1 sits in its own n-well tied to V_out.\n\nDefine the device ratio:\n\n$$k=\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n## 2. Large-signal (DC) characteristic\n\nThe current through M1 is:\n\n$$I_{D1}=\\tfrac12\\mu_pC_{ox}(W/L)_1\\,(V_{out}-V_{TH})^2$$\n\n**(a) M2 off:** This occurs for V_in > V_DD − V_TH. No current flows, so V_out ≈ V_TH.\n\n**(b) Both devices saturated:** Equating the two drain currents gives\n\n$$\\tfrac12\\mu_pC_{ox}(W/L)_2(V_{DD}-V_{in}-V_{TH})^2=\\tfrac12\\mu_pC_{ox}(W/L)_1(V_{out}-V_{TH})^2$$\n\n$$\\boxed{V_{out}=V_{TH}+k\\,(V_{DD}-V_{in}-V_{TH})}$$\n\nThis is a straight line with slope −k.\n\n**(c) M2 in triode:** M2 enters triode when V_SD2 < V_SG2 − V_TH, i.e. V_out > V_in + V_TH. Combining this with (b), triode occurs for\n\n$$V_{in}<\\frac{k}{1+k}(V_{DD}-V_{TH})$$\n\n- In this region the gain drops.\n- At V_in = 0, V_out = V_TH + (V_DD − V_TH)·k/√(1+k²), which is just below V_DD.\n\n```\nVout\n ^\n |‾‾‾‾‾‾‾‾‾‾‾--..                 M2 triode\n |                `.\n |                  \\             both saturated:\n |                   \\            slope = −√[(W/L)2/(W/L)1]\n |                    \\\nVTH - - - - - - - - - -`---------  M2 off\n +----------------|----|---------> Vin\n 0      k(VDD−VTH)/(1+k)  VDD−VTH\n```\n\n**Example:** V_DD = 1.8 V, V_TH = 0.4 V, (W/L)₂ = 9(W/L)₁, so k = 3.\n- For 1.05 V < V_in < 1.4 V, V_out falls linearly from 1.45 V to 0.4 V with gain −3.\n- At V_in = 0, V_out ≈ 1.73 V.\n\n## 3. Small-signal behavior\n\n$$A_v=-g_{m2}\\left(r_{o2}\\,\\|\\,r_{o1}\\,\\|\\,\\frac{1}{g_{m1}+g_{mb1}}\\right)\\approx-\\frac{g_{m2}}{g_{m1}}$$\n\nSince the two drain currents are equal:\n\n$$A_v\\approx-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}=-\\frac{V_{OV1}}{V_{OV2}}$$\n\nThe output resistance is low: R_out ≈ 1/g_m1.\n\n## 4. Key observations\n\n1. **Linearity.** The diode's square-root I–V characteristic undoes the input device's square law. The gain is therefore independent of the bias point, which is why region (b) is a straight line.\n\n2. **PVT robustness.** Both devices are PMOS, so μ_p cancels. The gain depends only on a geometry ratio. By contrast, an NMOS/PMOS mix gives a gain proportional to √(μ_n/μ_p).\n\n3. **Body effect.**\n   - If M1's well is tied to V_DD, then |A_v| = k/(1+η₁), where η₁ = γ / (2√(2Φ_F + V_DD − V_out)).\n   - η₁ varies with V_out, so the gain shrinks at high V_out. This causes nonlinearity.\n   - Placing M1 in a separate n-well tied to V_out removes the effect, which is possible because the load is a PMOS device.\n   - The cost is added well capacitance at the output.\n\n4. **Gain–headroom trade-off.** Keeping M2 saturated requires\n\n   $$V_{DD}\\ge V_{TH}+V_{OV1}+V_{OV2}\\;\\Rightarrow\\;|A_v|\\le\\frac{V_{DD}-V_{TH}}{V_{OV2}}-1$$\n\n   - The gain is typically only about 2–5.\n   - The size ratio scales as A_v², so a gain of 5 needs a 25:1 ratio.\n   - The output DC level is tied to the gain: V_out = V_TH + |A_v|·V_OV2.\n\n5. **Speed.** The output node has low impedance, which makes the stage wideband.\n   - Output pole ≈ g_m1/C_out.\n   - Gain-bandwidth ≈ g_m2/C_out.\n   - Input capacitance ≈ C_GS2 + (1+|A_v|)·C_GD2.\n\n6. **Noise.** The input-referred thermal noise is\n\n   $$\\overline{v_{n,in}^2}=\\frac{4kT\\gamma}{g_{m2}}\\left(1+\\frac{1}{|A_v|}\\right)$$\n\n   Because the gain is low, the load contributes significantly.\n\n7. **Supply sensitivity.** V_in is referred to ground but M2's source sits at V_DD. As a result, ripple on V_DD reaches the output amplified by k, the same as the signal.\n\n8. **Weak inversion.** Here g_m/I_D = 1/(nV_T) for both devices, so |A_v| → 1.\n   - The corner near V_in ≈ V_DD − V_TH is therefore smooth rather than sharp.\n   - V_out keeps falling as roughly V_DD − V_in + 2nV_T ln k, instead of stopping exactly at V_TH.\n\n**Summary:** This is an inverting, wideband, low-gain amplifier. Its gain, −√[(W/L)₂/(W/L)₁], is linear, set by geometry, and free of body effect when M1 has its own well. The price is limited gain, coupled output level and headroom, and extra noise from the load.",
        "format": "markdown",
        "sha256": "5768f09a85e2a9b9077c37377a92ca192e2c8536361baec957c6d52f47c9e432"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate/drain grounded. It gives the required gm/gm gain, Av ≈ −gm2/gm1; additional detail does not change the essential interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 31393,
        "total_tokens": 33243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 31393,
        "total_tokens": 33243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis: PMOS Common-Source Stage with a Diode-Connected PMOS Load\n\n## What the circuit is\n\nBoth transistors are PMOS (the arrow points into the source).\n\n- **M2**: source at V_DD, gate at V_in, drain at V_out. This is the **common-source input device**. It converts V_SG2 = V_DD − V_in into a drain current.\n- **M1**: gate and drain both at ground, source at V_out. With its gate tied to its drain, M1 is a **diode-connected load** from V_out to ground. You can also view it as a PMOS source follower whose input is 0 V and whose bias current comes from M2.\n\nSo the circuit is the upside-down counterpart of the familiar NMOS CS stage with a diode load. Its output DC level is simply V_SG1, so it is self-biased.\n\n---\n\n## 1. Operating regions\n\n- **M1**: V_SD1 = V_SG1 = V_out, so V_SD1 > V_SG1 − |V_TH1| always holds. M1 is **always saturated** when it conducts, which requires V_out > |V_TH1|.\n- **M2**: it is on for V_in < V_DD − |V_TH2|. It stays saturated while V_out ≤ V_in + |V_TH2|.\n\n## 2. Large-signal characteristic\n\nAssume the square law, λ = 0, and no body effect for now. Define A ≡ √[(W/L)₂/(W/L)₁].\n\n**(a) V_in > V_DD − |V_TH2|.** M2 is off and I_D ≈ 0, so **V_out ≈ |V_TH1|**. In reality, subthreshold conduction in M1 slowly pulls the node further down, so this level is poorly defined.\n\n**(b) M2 on and saturated.** Equate the two drain currents:\n\n$$\\tfrac12\\mu_pC_{ox}\\Big(\\tfrac WL\\Big)_2 (V_{DD}-V_{in}-|V_{TH2}|)^2=\\tfrac12\\mu_pC_{ox}\\Big(\\tfrac WL\\Big)_1 (V_{out}-|V_{TH1}|)^2$$\n\n$$\\boxed{V_{out}=|V_{TH1}|+\\sqrt{\\tfrac{(W/L)_2}{(W/L)_1}}\\,\\big(V_{DD}-V_{in}-|V_{TH2}|\\big)}$$\n\nThis is a straight line with slope −A. M2 \"squares\" the input voltage and M1 \"square-roots\" the current back, so the overall conversion is linear.\n\n**(c) M2 enters triode** when V_out = V_in + |V_TH2|. With equal thresholds:\n- This happens at V_in1 = A(V_DD − |V_TH|)/(1 + A).\n- Below V_in1, the slope magnitude falls and V_out approaches V_DD without ever reaching it.\n\n```\n  Vout\n      ^\n  VDD +- - - - - - - - - - - - - - - - - - - - -\n      |_____\n      |     ``--.._          M2 in triode\n      |            `\\\n      |              \\       M1, M2 saturated:\n      |               \\      straight line, slope = -A\n      |                \\\n      |                 \\\n|VTH1|+. . . . . . . . . \\__________________  M2 off\n      |\n      +------------+-----+------------------+--> Vin\n      0         Vin1  VDD-|VTH2|           VDD\n```\n\n## 3. Small-signal gain (both devices saturated)\n\nM1's gate and drain are at ac ground, and its body is at V_DD. Seen from its source, M1 therefore looks like 1/(g_m1 + g_mb1) ∥ r_o1.\n\n$$A_v=-g_{m2}\\Big(\\tfrac{1}{g_{m1}+g_{mb1}}\\,\\|\\,r_{o1}\\,\\|\\,r_{o2}\\Big)\\approx-\\frac{g_{m2}}{g_{m1}(1+\\eta_1)}=-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\cdot\\frac{1}{1+\\eta_1}$$\n\n**Key observations:**\n\n- **Mobility cancels.** Both devices are PMOS, so μ_p and C_ox drop out. The gain is a geometry ratio, nearly independent of process, temperature, bias current and signal level. The result is a precise, fairly linear, but low gain.\n- **Body effect.** If M1's well is at V_DD, then η₁ = γ/(2√(2Φ_F + V_DD − V_out)) varies with V_out. As V_out rises, |A_v| drops slightly, which adds mild nonlinearity.\n- **Removing the body effect.** Because M1 is a PMOS, it can sit in its own n-well tied to V_out. Then η₁ = 0 and A_v = −√[(W/L)₂/(W/L)₁] exactly. An NMOS diode load in a p-substrate cannot do this. The cost is extra well capacitance at the output.\n- **Special case.** With identical devices and no body effect, V_SG1 = V_SG2, so V_out = V_DD − V_in. This is a unity-gain inverting level shifter.\n- **Limits of the ratio formula.** The ratio result relies on the square law. In weak inversion, |A_v| collapses to about 1 (about 1/n if M1's well is at V_DD), regardless of sizing.\n\n## 4. Gain vs. headroom\n\nEqual currents give V_OV1 = |A_v|·V_OV2 (ignoring body effect). Two conditions then apply:\n- The output sits at V_out = |V_TH1| + V_OV1.\n- M2 stays saturated only if V_DD − V_out ≥ V_OV2.\n\nCombining them:\n\n$$|A_v|\\le\\frac{V_{DD}-|V_{TH1}|}{V_{OV2}}-1$$\n\nFor example, with V_DD = 1.2 V, |V_TH| = 0.4 V and V_OV2 = 0.1 V, the gain must be below 7, and at that point no swing is left.\n\nThe required size ratio also grows as gain²: |A_v| = 5 needs a 25:1 ratio. Practical gains are therefore about 2–5, and V_out can never fall below |V_TH1|.\n\n## 5. Output impedance and speed\n\n- **Output resistance:** R_out ≈ 1/(g_m1 + g_mb1), which is low.\n- **Output capacitance:** C_out = C_DB2 + C_GD2 + C_GS1 + C_SB1 + C_L.\n  - C_GD1 and C_DB1 drop out because both of their terminals are at ac ground.\n  - The output pole is at ω_p ≈ (g_m1 + g_mb1)/C_out, which is high. GBW ≈ g_m2/C_out.\n- **Input capacitance:** C_in ≈ C_GS2 + (1 + |A_v|)C_GD2. The Miller multiplication is small because the gain is small. There is a right-half-plane zero at g_m2/C_GD2.\n\nOverall, this is a broadband, low-gain stage.\n\n## 6. Noise and supply rejection\n\n- **Input-referred thermal noise:** v²_n,in ≈ (4kTγ/g_m2)(1 + g_m1/g_m2) ≈ (4kTγ/g_m2)(1 + 1/|A_v|). Because the gain is low, the load contributes a large share of the noise.\n- **Supply sensitivity:** v_out/v_dd ≈ (g_m2 + g_mb1)/(g_m1 + g_mb1) ≈ |A_v|. The stage really amplifies V_DD − V_in, so PSRR is poor unless V_in is itself referenced to V_DD.\n\n---\n\n**Summary:** This is an inverting PMOS common-source amplifier with a diode-connected PMOS load.\n- **Gain:** A_v ≈ −√[(W/L)₂/(W/L)₁]/(1 + η₁), which is low but well defined and fairly linear.\n- **Output:** low output impedance and wide bandwidth.\n- **Range:** the output is confined to between |V_TH1| and about V_in + |V_TH2|, and gain is traded directly against voltage headroom.",
        "format": "markdown",
        "sha256": "9575f4be4095af8ee827f9225fc2cd24640c7ab4687c6b340e393ab26cbc4425"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, M1 as a diode-connected PMOS load with gate and drain grounded, and gives the gm/gm gain. The additional analysis does not overturn the essential result.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 46840,
        "total_tokens": 48690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 44054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 46840,
        "total_tokens": 48690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 44054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis: PMOS Common-Source Stage with a Diode-Connected PMOS Load\n\n## 1. Identifying the topology\n\nBoth transistors are PMOS (the source arrows point inward).\n\n- **M2**: source at V_DD, gate driven by V_in, drain at V_out. It is a **common-source (inverting) amplifier**.\n- **M1**: source at V_out, with gate and drain both grounded. Its gate is effectively tied to its drain, so it is a **diode-connected PMOS load**. You can also view it as a PMOS source follower whose input is ground. Because V_SD1 = V_SG1, M1 is always saturated whenever it conducts.\n\nThis is the PMOS dual of the familiar NMOS CS stage with an NMOS diode load. M2 converts V_in into a current, and M1 converts that current back into a voltage.\n\nNotation: V_T1 = |V_TH1|, V_T2 = |V_TH2|, and A = √[(W/L)₂/(W/L)₁].\n\n## 2. Large-signal behavior\n\nThis section uses the square law, neglects λ, and ignores M1's body effect for now. Equating the two drain currents:\n\n$$\\tfrac12\\mu_pC_{ox}\\left(\\tfrac{W}{L}\\right)_2(V_{DD}-V_{in}-V_{T2})^2=\\tfrac12\\mu_pC_{ox}\\left(\\tfrac{W}{L}\\right)_1(V_{out}-V_{T1})^2$$\n\n**Region 1: V_in > V_DD − V_T2**\n- M2 is off, so I_D ≈ 0.\n- M1 discharges the output until V_out ≈ V_T1. Subthreshold leakage lets it creep slightly lower.\n\n**Region 2: M2 saturated (V_out − V_T2 ≤ V_in ≤ V_DD − V_T2)**\n\n$$V_{out}=V_{T1}+A\\,(V_{DD}-V_{in}-V_{T2})$$\n\n- This is a straight line with slope −A.\n- The square law of M2 is undone by the square-root law of the diode, and μ_pC_ox cancels.\n- Equivalently, V_ov1 = A·V_ov2.\n\n**Region 3: V_in < V_out − V_T2**\n- M2 enters triode, the slope collapses, and V_out levels off somewhat below V_DD.\n\nAssuming equal thresholds (V_T), the edge of the triode region is:\n\n$$V_{in,B}=\\frac{A(V_{DD}-V_T)}{1+A},\\qquad V_{out,B}=\\frac{A V_{DD}+V_T}{1+A}$$\n\nSo the linear output range runs from V_T to V_out,B.\n\n## 3. Small-signal gain\n\nAssume M1's body is at V_DD (ac ground). KCL at the output gives:\n\n$$-g_{m2}v_{in}=v_{out}\\left(g_{m1}+g_{mb1}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right)$$\n\n$$A_v=-g_{m2}\\left(\\frac{1}{g_{m1}+g_{mb1}}\\parallel r_{o1}\\parallel r_{o2}\\right)\\approx-\\frac{g_{m2}}{g_{m1}+g_{mb1}}=-\\frac{1}{1+\\eta}\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\nIf M1 sits in its own n-well tied to its source, then g_mb1 = 0 and:\n\n$$A_v\\approx-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}=-\\frac{V_{ov1}}{V_{ov2}}$$\n\nImportant observations:\n\n- **The gain depends only on a geometry ratio.** It does not depend on μ_p, C_ox, bias current, or (to first order) temperature and process.\n  - By contrast, an NMOS-input stage with a PMOS diode load has gain √(μ_n(W/L)/μ_p(W/L)), which drifts with the mobility ratio.\n- **The body effect can be removed.** Placing M1 in a separate n-well eliminates it. An NMOS diode load cannot do this in a standard (non-triple-well) process.\n  - If M1's body is at V_DD, then η = γ/[2√(2|Φ_F| + V_DD − V_out)] varies with V_out. The gain becomes smaller and slightly nonlinear.\n- **Both devices must be in strong inversion.** In weak inversion, g_m ≈ I_D/(nV_T) for both devices, so |A_v| collapses to about 1 regardless of sizing.\n\n## 4. Impedances\n\n- **Output:** R_out = (g_m1 + g_mb1)⁻¹ ∥ r_o1 ∥ r_o2 ≈ 1/g_m1, which is low.\n- **Input:** R_in → ∞; the input is purely capacitive.\n\n## 5. Gain–headroom trade-off\n\nThe DC output is V_out = V_T1 + V_ov1 = V_T1 + |A_v|·V_ov2. Keeping M2 saturated requires V_DD − V_out ≥ V_ov2, so:\n\n$$|A_v|\\le\\frac{V_{DD}-V_{T1}}{V_{ov2}}-1\\quad(\\text{before allowing any swing})$$\n\n- **Example:** with V_DD = 1 V, V_T = 0.3 V and V_ov2 = 0.1 V, the limit is |A_v| < 6. In practice the achievable gain is about 2–4.\n- **Sizing cost:** the device ratio (W/L)₂/(W/L)₁ equals A_v². A gain of 5 therefore needs a 25:1 ratio, which means either large input capacitance or a long, capacitive load device.\n\n## 6. Other properties\n\n**Bias and supply sensitivity**\n- There is no current source, so I_D ∝ (V_DD − V_in − V_T2)².\n- The DC output shifts by A for every volt of change in V_DD or in the input DC level.\n- Supply ripple reaches the output with a gain of v_out/v_dd ≈ g_m2/g_m1 ≈ |A_v|, so the single-ended PSRR is about 0 dB.\n- In practice the stage is used differentially with a tail current source, or with replica biasing.\n\n**Frequency response**\n- The output pole is ω_out ≈ (g_m1 + g_mb1)/C_out.\n  - C_out = C_DB2 + C_GS1 + M1's junction/well capacitance + C_L.\n  - This pole is high because the output node sees only about 1/g_m1.\n- The input capacitance is C_GS2 + (1 + |A_v|)C_GD2. The Miller multiplication is modest because the gain is low.\n- There is a right-half-plane zero at g_m2/C_GD2.\n- The gain–bandwidth product is GBW ≈ g_m2/C_out.\n\n**Noise**\n\n$$\\overline{V_{n,in}^2}=4kT\\gamma\\left(\\frac{1}{g_{m2}}+\\frac{g_{m1}}{g_{m2}^2}\\right)=\\frac{4kT\\gamma}{g_{m2}}\\left(1+\\frac{1}{|A_v|}\\right)$$\n\nBecause the gain is low, the diode load contributes a significant share of the noise.\n\n**Level shifting**\n- The input sits about |V_GS2| below V_DD, while the output sits about |V_GS1| above ground.\n- This lets the stage naturally drive its complementary NMOS-input version.\n\n## Summary\n\nThis is an inverting, self-biased, low-gain amplifier:\n\n- **Gain:** about −√[(W/L)₂/(W/L)₁], reduced by a factor 1/(1+η) if M1 has body effect.\n- **Strengths:**\n  - The gain is set by a geometry ratio and is therefore robust to process, voltage and temperature.\n  - The transfer curve is linear in the square-law region.\n  - The output resistance is about 1/g_m1, so the bandwidth is wide.\n- **Weaknesses:**\n  - The gain is limited by headroom, since |A_v| = V_ov1/V_ov2.\n  - The bias current and output DC level depend on V_DD − V_in.\n  - Supply rejection is poor in single-ended form.",
        "format": "markdown",
        "sha256": "58bc98ef5b66f5c73b16edc54d25d7167431bef20e7697e693fcf32deccf6c7e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load. It gives the required gm/gm gain, including body effect as a qualification; the additional analysis does not alter the essential answer.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 35854,
        "total_tokens": 37704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33023,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 35854,
        "total_tokens": 37704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33023,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Output resistance of the PMOS cascode\n\n$$R_{out}=\\big[1+(g_{m1}+g_{mb1})\\,r_{o2}\\big]\\,r_{o1}+r_{o2}\\;\\approx\\; g_{m1}r_{o1}r_{o2}$$\n\n## Setup\n\nV_DD, V_b1 and V_b2 are all small-signal grounds.\n\n- **M2:** Its gate and source are both at AC ground, so v_gs2 = 0. Its g_m generator is inactive, and it acts as a resistance r_o2 from node X to ground.\n- **M1:** It is a common-gate device whose source is degenerated by r_o2. We look into its drain.\n\n## Derivation\n\nApply a test voltage V_t at the output and let I_t flow into the drain of M1.\n\n**1. Voltage at X.** All of I_t passes through M1 into r_o2, so\n\n$$v_X = I_t\\,r_{o2}$$\n\n**2. Controlling voltages of M1.** The gate of M1 is at AC ground, so\n\n$$v_{gs1} = -v_X$$\n\nIf M1's body is tied to V_DD, then also v_bs1 = −v_X.\n\n**3. Current through r_o1.** The current through r_o1 is I_t minus the dependent-source current:\n\n$$i_{r_{o1}} = I_t - g_{m1}v_{gs1} - g_{mb1}v_{bs1} = I_t + (g_{m1}+g_{mb1})I_t r_{o2}$$\n\n**4. Output voltage.**\n\n$$V_t = v_X + r_{o1}\\,i_{r_{o1}} = I_t r_{o2} + I_t r_{o1}\\big[1+(g_{m1}+g_{mb1})r_{o2}\\big]$$\n\nDividing by I_t gives\n\n$$R_{out}=\\frac{V_t}{I_t}= r_{o1}+r_{o2}+(g_{m1}+g_{mb1})\\,r_{o1}r_{o2}$$\n\n## Notes\n\n- **Approximation:** Since g_m r_o ≫ 1, R_out ≈ (g_m1 + g_mb1) r_o1 r_o2 ≈ g_m1 r_o1 r_o2.\n- **No body effect:** If M1 sits in its own n-well with its body tied to its source, g_mb1 = 0. Then R_out = (1 + g_m1 r_o2) r_o1 + r_o2.\n- **Interpretation:** M1 boosts the output resistance of the current source M2 by roughly its intrinsic gain, g_m1 r_o1.",
        "format": "markdown",
        "sha256": "af33b46bf203522287346b9e26a0a3bb096db9eaabb56804e8ba7e5512ce3b6e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate cascode device and gives the full output-resistance expression and its valid approximation. The device roles and small-signal reasoning match the golden solution.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2827,
        "output_tokens": 2533,
        "total_tokens": 5360,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2827,
        "output_tokens": 2533,
        "total_tokens": 5360,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$$R_{out}=r_{O1}+r_{O2}+g_{m1}r_{O1}r_{O2}\\;\\approx\\; g_{m1}r_{O1}r_{O2}$$\n\nThe circuit is a PMOS cascode current source: M2 is the current source and M1 is the cascode device.\n\n**Small-signal picture**\n\n- M2 has its gate (V_b2) and source (V_DD) at AC ground. It therefore looks like a simple resistor r_O2 from node X to ground.\n- M1 has its gate (V_b1) at AC ground, and its source is degenerated by r_O2.\n\n**Derivation**\n\nApply a test voltage V_t at the output and let I_t flow into the drain of M1.\n\n1. The whole current I_t flows through r_O2, so the voltage at X is\n $$v_X = I_t\\,r_{O2}$$\n\n2. The gate of M1 is at AC ground, so\n $$v_{gs1} = -v_X = -I_t r_{O2}$$\n\n3. The current into M1's drain is the dependent source plus the current through r_O1:\n $$I_t = g_{m1}v_{gs1} + \\frac{V_t - v_X}{r_{O1}} = -g_{m1}I_t r_{O2} + \\frac{V_t - I_t r_{O2}}{r_{O1}}$$\n\n4. Solving for V_t/I_t gives\n $$R_{out}=\\frac{V_t}{I_t}= (1+g_{m1}r_{O2})\\,r_{O1}+r_{O2} = r_{O1}+r_{O2}+g_{m1}r_{O1}r_{O2}$$\n\nSince g_m r_O ≫ 1, R_out ≈ g_m1 r_O1 r_O2. The cascode raises the output resistance of M2 alone by roughly the intrinsic gain g_m1 r_O1 of M1.\n\nIf body effect in M1 is included (body tied to V_DD), replace g_m1 with g_m1 + g_mb1:\n$$R_{out}=[1+(g_{m1}+g_{mb1})r_{O2}]\\,r_{O1}+r_{O2}$$",
        "format": "markdown",
        "sha256": "4efb4480ff8ecd9f408da9dfd9bbe7c75da12b4389c19f1d7b0f9f9d2879504d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS topology and M1 as the cascode device, and gives the correct output-resistance expression and approximation. Including body effect is also correct.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2827,
        "output_tokens": 2029,
        "total_tokens": 4856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2827,
        "output_tokens": 2029,
        "total_tokens": 4856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Output Resistance of the PMOS Cascode\n\nM2 is the current source (source at V_DD, gate at V_b2). M1 is the cascode device (gate at V_b1, source at node X, drain at the output).\n\n## Small-signal setup\n\nAll bias voltages become AC ground: V_DD, V_b1 and V_b2.\n\nApply a test voltage V_t at the output and let I_t flow into the output node. I_t passes through M1 and then through M2, which acts only as the resistor r_o2 because its v_gs = 0.\n\n**Voltage at node X:**\n$$v_X = I_t\\, r_{o2}$$\n\n**Device M1:** The gate is grounded, so\n$$v_{gs1} = -v_X$$\n\nThe body is tied to V_DD (AC ground), so\n$$v_{bs1} = -v_X$$\n\nThe current in M1 is:\n$$I_t = -(g_{m1}+g_{mb1})\\,v_X + \\frac{V_t - v_X}{r_{o1}}$$\n\n## Solve\n\nSubstitute v_X = I_t r_o2:\n\n$$I_t\\, r_{o1} = -(g_{m1}+g_{mb1})\\,r_{o1} r_{o2} I_t + V_t - I_t r_{o2}$$\n\n$$V_t = I_t\\left[r_{o1} + r_{o2} + (g_{m1}+g_{mb1})\\,r_{o1} r_{o2}\\right]$$\n\n## Result\n\n$$\\boxed{R_{out} = \\left[1+(g_{m1}+g_{mb1})\\,r_{o1}\\right]r_{o2} + r_{o1} \\;\\approx\\; g_{m1} r_{o1} r_{o2}}$$\n\nIf body effect is neglected, set g_mb1 = 0. The result shows that the cascode device M1 boosts the output resistance of the current source M2 by roughly its intrinsic gain, g_m1 r_o1.",
        "format": "markdown",
        "sha256": "d33d4470cfbe97a217531477c8c770aaabddd509b0ca6d2d513cccf55883875b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the PMOS cascode device and gives the correct output-resistance expression and approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2827,
        "output_tokens": 1665,
        "total_tokens": 4492,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2827,
        "output_tokens": 1665,
        "total_tokens": 4492,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Keeping M2 in Saturation\n\nM2 is the current-source device and M1 is the cascode. M2's drain voltage $V_X$ is not set by M2. It is set by M1 through $V_{b1}$, so **$V_{b1}$ must be placed low enough.**\n\n## 1. Saturation condition for M2 (PMOS)\n\n$$\nV_{SD2} \\ge V_{SG2} - |V_{TH2}| \\;\\;\\Longleftrightarrow\\;\\; V_X \\le V_{b2} + |V_{TH2}|\n$$\n\nIn words, the drain of M2 can rise at most one $|V_{TH}|$ above its gate.\n\n## 2. What sets $V_X$\n\nM1 carries M2's current $I_D$. With M1 in saturation, its source sits one $|V_{GS1}|$ above its gate:\n\n$$\nV_X = V_{b1} + |V_{GS1}|, \\qquad |V_{GS1}| = |V_{TH1}| + \\sqrt{\\frac{2I_D}{\\mu_p C_{ox}(W/L)_1}}\n$$\n\nSince $V_{b1}$ is fixed, $V_X$ stays nearly constant as $V_{out}$ varies. This is the shielding action of the cascode. So $V_X$ only needs to be set correctly once.\n\n## 3. Required bias condition\n\nCombining the two:\n\n$$\nV_{b1} + |V_{GS1}| \\le V_{b2} + |V_{TH2}| \\;\\;\\Longrightarrow\\;\\; V_{b1} \\le V_{b2} - \\big(|V_{GS1}| - |V_{TH2}|\\big)\n$$\n\nSo $V_{b1}$ must be at least $|V_{GS1}| - |V_{TH2}|$ below $V_{b2}$.\n\n- If $|V_{TH1}| \\approx |V_{TH2}|$, the required gap is just M1's overdrive: $V_{b2} - V_{b1} \\ge V_{ov1}$.\n- Body effect in M1 (its source is below $V_{DD}$) raises $|V_{TH1}|$, so slightly more separation is needed.\n\nIf this is violated, $V_X$ rises and M2 enters triode. Its $r_{o2}$ then collapses, and the high output resistance $R_{out} \\approx g_{m1} r_{o1} r_{o2}$ is lost.\n\n## 4. Don't make $V_{b1}$ too low\n\nM1 must also stay saturated:\n\n$$\nV_{out} \\le V_{b1} + |V_{TH1}|\n$$\n\nLowering $V_{b1}$ more than necessary wastes output swing. The best choice puts M2 at the edge of saturation, plus a margin of about 0.1–0.2 V for process, voltage, and temperature variations:\n\n$$\nV_{b1} \\approx V_{b2} + |V_{TH2}| - |V_{GS1}| \\;\\;\\Rightarrow\\;\\; V_{out,max} = V_{DD} - V_{ov2} - V_{ov1}\n$$\n\nIn other words, the cascode current source uses up two overdrive voltages of headroom.\n\n## 5. In practice\n\n$V_{b1}$ is produced by a bias branch that tracks the transistors. A common choice is a diode-connected PMOS with about 1/4 the W/L, carrying the same current. Its $|V_{GS}| = |V_{TH}| + 2V_{ov}$, so:\n\n$$\nV_{b1} \\approx V_{DD} - |V_{TH}| - 2V_{ov} \\;\\Rightarrow\\; V_{SD2} \\approx V_{ov}\n$$\n\nThis assumes M1 and M2 have the same W/L. Sizing this device slightly smaller than 1/4 provides extra margin.",
        "format": "markdown",
        "sha256": "1638ca189d0fa6c6ec7ff47fad4b57f20e709e0d1ba3b67546e9d70326b72fc3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and relates VX = Vb1 + |VGS1| to derive the required Vb1 bias condition. This meets the full-credit rule.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2791,
        "output_tokens": 7021,
        "total_tokens": 9812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5757,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2791,
        "output_tokens": 7021,
        "total_tokens": 9812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5757,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Keeping M2 in Saturation\n\nM2's drain voltage (node X) is set by M1's gate bias $V_{b1}$, so we must choose $V_{b1}$ **low enough**, at least about one overdrive of M1 below $V_{b2}$.\n\n## 1. Saturation condition for M2\n\nM2 has its source at $V_{DD}$, its gate at $V_{b2}$ and its drain at X:\n\n$$V_{SD2} \\ge V_{SG2} - |V_{TH2}| \\;\\Rightarrow\\; V_{DD}-V_X \\ge V_{DD}-V_{b2}-|V_{TH2}|$$\n\n$$\\Rightarrow\\; V_X \\le V_{b2} + |V_{TH2}| \\qquad (\\text{equivalently } V_X \\le V_{DD} - V_{od2})$$\n\n## 2. What sets $V_X$?\n\nM1 acts like a source follower. Its current $I_D$ is fixed by M2, so its $|V_{GS1}|$ is fixed:\n\n$$V_X = V_{b1} + |V_{GS1}|, \\qquad |V_{GS1}| = |V_{TH1}| + \\sqrt{\\frac{2I_D}{\\mu_p C_{ox}(W/L)_1}}$$\n\nSince M1 shields X from the output, $V_X$ depends on $V_{b1}$, not on $V_{out}$, as long as M1 stays saturated.\n\n## 3. Resulting condition on $V_{b1}$\n\n$$V_{b1} + |V_{GS1}| \\le V_{b2} + |V_{TH2}| \\;\\Rightarrow\\; V_{b1} \\le V_{b2} - \\big(|V_{GS1}| - |V_{TH2}|\\big)$$\n\nAn equivalent form is $V_{b1} \\le V_{DD} - (|V_{GS1}| + V_{od2})$.\n\nIf body effect is neglected ($|V_{TH1}| \\approx |V_{TH2}|$), this reduces to:\n\n$$V_{b2} - V_{b1} \\ge V_{od1}$$\n\nIf $V_{b1}$ is too close to $V_{DD}$, M1 pushes X up and squeezes $V_{SD2}$. M2 then enters triode, and $R_{out} \\approx g_{m1} r_{O1} r_{O2}$ collapses.\n\n## 4. But don't make $V_{b1}$ too low\n\nM1 must also be saturated, which requires $V_{out} \\le V_{b1} + |V_{TH1}|$. Lowering $V_{b1}$ more than necessary directly reduces the output swing. The optimum places M2 at the edge of saturation, plus a small margin for PVT variations and body effect:\n\n$$V_{b1} \\approx V_{DD} - |V_{TH1}| - V_{od1} - V_{od2} \\;\\Rightarrow\\; V_{out,max} = V_{DD} - (V_{od1} + V_{od2})$$\n\n## 5. Practical bias generation\n\n$V_{b1}$ is usually generated with diode-connected replica devices so the condition tracks process and temperature. Two common options:\n\n- **Stacked diodes.** Stack diode-connected copies of M2 and M1 at the same current density. This gives $V_{b2} = V_{DD} - |V_{GS3}|$ and $V_{b1} = V_{b2} - |V_{GS4}|$, so $V_X \\approx V_{b2}$.\n  - M2 is then safely saturated, with $V_{SD2} = V_{SG2}$, a margin of about $|V_{TH}|$.\n  - The cost is one $V_{TH}$ of output headroom.\n- **Low-voltage (wide-swing) bias.** Use a single, weaker diode-connected device. For example, at equal currents, 1/4 of M1's $W/L$ gives an overdrive of $2V_{od}$ (assuming $V_{od1} = V_{od2} = V_{od}$).\n  - This gives $V_{b1} \\approx V_{DD} - |V_{TH}| - 2V_{od}$, putting M2 near the edge of saturation.\n  - In practice the device is made slightly weaker still, for margin.",
        "format": "markdown",
        "sha256": "41a8a0f2f337167fe9ca5d06b96019fa81dde3f15a5cdffea28c04f44f801b90"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly treats M1 and M2 as PMOS, gives M2’s saturation condition, and uses V_X = V_b1 + |V_GS1| to derive the required condition on V_b1. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2791,
        "output_tokens": 11244,
        "total_tokens": 14035,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9828,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2791,
        "output_tokens": 11244,
        "total_tokens": 14035,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9828,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Ensuring M2 Is in Saturation\n\nThe drain voltage of M2 (node X) is set by **V_b1** through M1, so we keep M2 saturated by choosing V_b1 low enough.\n\n## 1. Saturation condition for M2\n\nM2 is a PMOS with its source at V_DD, gate at V_b2 and drain at X. It is saturated if\n\n$$\nV_{SD2} \\ge V_{SG2} - |V_{TH2}|\n\\;\\;\\Rightarrow\\;\\; V_{DD}-V_X \\ge V_{DD}-V_{b2}-|V_{TH2}|\n\\;\\;\\Rightarrow\\;\\; V_X \\le V_{b2} + |V_{TH2}|\n$$\n\nThe drain of M2 must not rise more than one |V_TH| above its gate.\n\n## 2. What sets V_X\n\nM1 carries the current that M2 defines, so its source-gate voltage is fixed:\n\n$$\nV_{SG1} = |V_{TH1}| + \\sqrt{\\frac{2I_D}{\\mu_p C_{ox}(W/L)_1}}\n$$\n\nM1 therefore acts like a source follower from V_b1 to X:\n\n$$\nV_X = V_{b1} + V_{SG1}\n$$\n\nThis is also why X barely moves when V_out changes. That shielding is what gives the cascode its high R_out.\n\n## 3. The design condition\n\nCombining the two results:\n\n$$\nV_{b1} + V_{SG1} \\le V_{b2} + |V_{TH2}|\n\\quad\\Rightarrow\\quad\nV_{b1} \\le V_{b2} + |V_{TH2}| - V_{SG1}\n$$\n\nSubstituting V_b2 = V_DD − V_SG2 gives the equivalent form:\n\n$$\nV_{b1} \\le V_{DD} - |V_{OD2}| - V_{SG1}\n$$\n\nSo V_b1 must sit below V_b2 by at least V_SG1 − |V_TH2|. If the thresholds are equal, that is about |V_OD1|.\n\n## 4. But don't make V_b1 too low\n\nM1 must also stay saturated, which requires V_out ≤ V_b1 + |V_TH1|. Lowering V_b1 gives M2 more margin but reduces the allowed output voltage.\n\nThe best choice is to set V_b1 at, or slightly below, V_DD − |V_OD2| − V_SG1. This puts M2 at the edge of saturation and gives the maximum output voltage:\n\n$$\nV_{out,max} = V_{DD} - |V_{OD1}| - |V_{OD2}|\n$$\n\n## Numerical example\n\nAssume V_DD = 1.8 V, |V_TH| = 0.4 V, |V_OD| = 0.2 V for both devices, and V_b2 = 1.2 V.\n\n- M2 requires V_X ≤ 1.6 V.\n- With V_SG1 = 0.6 V, this gives V_b1 ≤ 1.0 V.\n- With V_b1 = 1.0 V (a bit lower in practice for margin), V_out can go up to 1.4 V, which is V_DD − 2|V_OD|.\n\n## Practical notes\n\n- **Body effect:** If M1's n-well is tied to V_DD, its |V_TH1| increases. That raises V_SG1 and pushes V_X up, so V_b1 must be lowered further. Alternatively, put M1 in its own well tied to X.\n- **Generating V_b1:** V_b1 is usually produced by diode-connected PMOS devices carrying a reference current, so it tracks process and temperature.\n  - Stacking two diode-connected devices gives V_b1 = V_DD − V_SG2 − V_SG1, so V_X = V_b2. This is safely saturated but wastes about one |V_TH| of headroom.\n  - Low-voltage cascode bias schemes avoid that loss.",
        "format": "markdown",
        "sha256": "c11db9fe87f210ae74912ae43bfcbf070528b362aa7cc0f92754a2139e02f2d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and uses V_X = V_b1 + V_SG1 to derive the required condition on V_b1. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2791,
        "output_tokens": 6829,
        "total_tokens": 9620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5528,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2791,
        "output_tokens": 6829,
        "total_tokens": 9620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5528,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the NMOS Cascode Amplifier with an Ideal Current-Source Load\n\n**Topology:** M1 is a common-source input device that converts $v_{in}$ to a current. M2 is a common-gate (cascode) device, with its gate held at the DC bias $V_{b1}$. The ideal current source $I_1$ is the load. Both transistors carry the same DC current, $I_{D1}=I_{D2}=I_1$.\n\n---\n\n## 1. Bias conditions and headroom\n\nThe cascode device sets the voltage at node X:\n\n$$V_X = V_{b1}-V_{GS2}$$\n\n- **M1 saturated:** $V_X \\ge V_{GS1}-V_{TH1}$, which requires $V_{b1}\\ge V_{GS2}+(V_{GS1}-V_{TH1})$.\n- **M2 saturated:** $V_{out}\\ge V_{b1}-V_{TH2}$.\n\nIf $V_{b1}$ is set to its minimum value:\n\n$$V_{out,min}=(V_{GS1}-V_{TH1})+(V_{GS2}-V_{TH2}) = V_{OD1}+V_{OD2}$$\n\n- The output can therefore swing from $V_{OD1}+V_{OD2}$ up to $V_{DD}$ minus the headroom that $I_1$ needs.\n- The cascode costs one extra overdrive voltage compared with a simple CS stage.\n- Raising $V_{b1}$ above the minimum wastes swing. Lowering it pushes M1 into triode.\n- Because M2's source sits at $V_X>0$, body effect raises $V_{TH2}$.\n\n## 2. Small-signal voltage gain\n\nBecause $I_1$ is ideal, the small-signal current through M2 and M1 must be zero.\n\n**M1:**\n$$g_{m1}v_{in}+\\frac{v_X}{r_{O1}}=0 \\;\\Rightarrow\\; v_X=-g_{m1}r_{O1}\\,v_{in}$$\n\n**M2:**\n$$-(g_{m2}+g_{mb2})v_X+\\frac{v_{out}-v_X}{r_{O2}}=0 \\;\\Rightarrow\\; v_{out}=[1+(g_{m2}+g_{mb2})r_{O2}]\\,v_X$$\n\nCombining the two:\n\n$$\\boxed{A_v=-g_{m1}r_{O1}\\,[1+(g_{m2}+g_{mb2})r_{O2}]\\approx -g_{m1}r_{O1}\\,g_{m2}r_{O2}\\sim-(g_mr_O)^2}$$\n\nFor example, with $g_mr_O\\approx 30$ the gain is about 900 (≈ 59 dB). A CS stage with the same ideal load would give only about 30.\n\n## 3. Output resistance and transconductance\n\nWith $v_{in}=0$, M1 acts as a resistor $r_{O1}$ that degenerates M2:\n\n$$R_{out}=r_{O1}+r_{O2}+(g_{m2}+g_{mb2})r_{O1}r_{O2}\\approx (g_{m2}+g_{mb2})r_{O2}\\,r_{O1}$$\n\nThe effective transconductance is\n\n$$G_m=|A_v|/R_{out}=g_{m1}(1-r_{O2}/R_{out})\\approx g_{m1}$$\n\nso $A_v=-G_mR_{out}$. In other words:\n- M1 supplies the transconductance.\n- M2 boosts the output resistance by about $g_{m2}r_{O2}$. It \"shields\" M1: an output voltage change appears at X divided by $1+(g_{m2}+g_{mb2})r_{O2}$.\n\n## 4. A subtle point: node X is *not* low-impedance here\n\nThe resistance looking into M2's source, with a load $R_L$ at its drain, is\n\n$$R_{in2}=\\frac{R_L+r_{O2}}{1+(g_{m2}+g_{mb2})r_{O2}}$$\n\n- This is about $1/g_{m2}$ only when $R_L\\ll r_{O2}$.\n- With an ideal current source, $R_L\\to\\infty$, so $R_{in2}\\to\\infty$.\n\nNode X therefore sees only $r_{O1}$, and\n\n$$\\frac{v_X}{v_{in}}=-g_{m1}r_{O1}\\quad(\\text{not } \\approx -g_{m1}/g_{m2})$$\n\nThe gain is split between the two devices:\n- M1 operates as a CS stage with its full intrinsic gain.\n- M2 operates as a CG stage with a gain of about $g_{m2}r_{O2}$.\n- X swings little relative to the output, but a lot relative to the input.\n\n**Consequence for the Miller effect:**\n- **At low frequencies,** $C_{GD1}$ is multiplied by about $(1+g_{m1}r_{O1})$.\n- **At higher frequencies,** the load capacitance takes over. Once $\\omega \\gtrsim 1/(r_{O2}C_L)$, which is still about $g_mr_O$ times below the unity-gain frequency:\n  - $R_{in2}\\to 1/(g_{m2}+g_{mb2})$\n  - $|v_X/v_{in}|\\to g_{m1}/g_{m2}\\approx 1$\n  - $C_{in}\\approx C_{GS1}+2C_{GD1}$\n\nSo the cascode's Miller suppression is restored in the frequency range that matters.\n\n## 5. Frequency response\n\nDefine the node capacitances:\n- $C_X = C_{DB1}+C_{GD1}+C_{GS2}+C_{SB2}$\n- $C_L = C_{GD2}+C_{DB2}+C_{load}$\n\nAssuming an ideal input source, KCL at X and at the output gives\n\n$$\\frac{v_{out}}{v_{in}}(s)=-A_0\\frac{1-sC_{GD1}/g_{m1}}{1+s(R_{out}C_L+r_{O1}C_X)+s^2r_{O1}r_{O2}C_XC_L}$$\n\n| Feature | Expression | Comment |\n|---|---|---|\n| Dominant pole (output) | $\\omega_{p1}\\approx 1/(R_{out}C_L)$ | Very low, because $R_{out}$ is huge |\n| Non-dominant pole (node X) | $\\omega_{p2}\\approx (g_{m2}+g_{mb2})/C_X$ | A fraction of M2's $\\omega_T$ |\n| RHP zero | $g_{m1}/C_{GD1}$ | Typically very high |\n| Unity-gain bandwidth | $\\omega_u\\approx A_0\\,\\omega_{p1}\\approx g_{m1}/C_L$ | |\n\n- Cascoding raises the DC gain by about $g_{m2}r_{O2}$ but does not change the gain-bandwidth product.\n- For stable use in a feedback loop, the non-dominant pole must lie well above crossover: $(g_{m2}+g_{mb2})/C_X \\gg g_{m1}/C_L$.\n\n## 6. Noise\n\nAt low frequencies, M2's noise is negligible:\n- A noise current $I_{n2}$ in M2 produces only $I_{n2}r_{O2}$ at the output.\n- M1's noise current produces about $I_{n1}R_{out}$.\n- M2's contribution is therefore smaller by roughly $g_{m2}r_{O1}$.\n\nThe input-referred noise is essentially that of M1:\n\n$$\\overline{v_n^2}\\approx \\frac{4kT\\gamma}{g_{m1}}+\\frac{K}{C_{ox}WLf}$$\n\nAt high frequencies, $C_X$ removes M2's source degeneration and its noise begins to appear.\n\n## 7. Practical remarks\n\n- **Real load:** with a finite load resistance (e.g., a PMOS source with $r_{O3}$), $A_v=-g_{m1}(R_{out}\\parallel r_{O3})\\approx -g_{m1}r_{O3}$. The gain advantage is lost unless the load is also cascoded (a telescopic cascode).\n- **DC output level:** the output is a very high-impedance node, so its DC level is extremely sensitive to any mismatch between $I_1$ and M1's current. Input errors are amplified by about $(g_mr_O)^2$. In practice the stage must be biased inside a feedback loop, or with common-mode feedback in a differential design.\n- **Slewing:** the positive-going output slew rate is limited to $I_1/C_L$.\n\n**Bottom line:** the circuit is a single-stage, single-dominant-pole amplifier.\n- Gain is about $(g_mr_O)^2$.\n- Output resistance is about $g_{m2}r_{O2}r_{O1}$.\n- GBW is about $g_{m1}/C_L$.\n- The cost is one extra overdrive of headroom.",
        "format": "markdown",
        "sha256": "eb8e6688317e0c3e1d82e6ca5b5f20307913967210afc1bfca4636e601170d8f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the equivalent ideal-load gain expression specified by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 29647,
        "total_tokens": 31101,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 29647,
        "total_tokens": 31101,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Cascode Amplifier with an Ideal Current-Source Load\n\n## What the circuit is\n\n- **M₁** is a common-source device. It converts $v_{in}$ into a current.\n- **M₂** is a common-gate (cascode) device. Its gate is at AC ground through $V_{b1}$. It passes M₁'s current to the output and shields M₁'s drain from the output.\n- **I₁** is an ideal load, so its small-signal resistance is infinite.\n\nIn short, this is a CS stage followed by a CG current buffer.\n\n---\n\n## 1. Bias and headroom\n\n- Both transistors carry the same current: $I_{D1}=I_{D2}=I_1$. This fixes $V_{GS1}$ and $V_{GS2}$. Note that $V_{TH2}$ is raised by body effect, since $V_{SB2}=V_X$.\n- The intermediate node sits at $V_X = V_{b1}-V_{GS2}$.\n- **M₁ in saturation** requires $V_X \\ge V_{OD1}$, which means $V_{b1} \\ge V_{GS2}+V_{OD1}$.\n- **M₂ in saturation** requires $V_{out} \\ge V_{b1}-V_{TH2}$.\n- With $V_{b1}$ at its minimum value, $V_{out,min} = V_{OD1}+V_{OD2}$. This is one overdrive more than a simple CS stage needs.\n- The upper limit of $V_{out}$ is $V_{DD}$ minus the headroom required by I₁.\n- Because the output resistance is huge, the DC level of $V_{out}$ is extremely sensitive to any mismatch between $I_1$ and $I_{D1}(V_{in})$. In practice it must be set by feedback (or CMFB in a differential version).\n- As $V_{in}$ rises, $V_{out}$ falls quickly while $V_X$ barely moves. So M₂ normally leaves saturation first, and then M₁ follows.\n\n---\n\n## 2. Small-signal voltage gain\n\nThe key observation: because I₁ is ideal, the small-signal current through M₂, and therefore through M₁, is **zero**.\n\n**For M₁:**\n$$g_{m1}v_{in}+\\frac{v_X}{r_{O1}}=0 \\;\\Rightarrow\\; v_X=-g_{m1}r_{O1}\\,v_{in}$$\n\n**For M₂:**\n$$-(g_{m2}+g_{mb2})v_X+\\frac{v_{out}-v_X}{r_{O2}}=0 \\;\\Rightarrow\\; v_{out}=\\left[1+(g_{m2}+g_{mb2})r_{O2}\\right]v_X$$\n\nCombining the two:\n\n$$\\boxed{A_v=-g_{m1}r_{O1}\\left[1+(g_{m2}+g_{mb2})r_{O2}\\right]\\approx-(g_{m1}r_{O1})(g_{m2}r_{O2})}$$\n\nThe gain is roughly the square of the intrinsic gain. For example, with $g_mr_O=20$, $|A_v|\\approx 420$ (about 52 dB), versus 20 (26 dB) for a CS stage.\n\n---\n\n## 3. Output resistance and transconductance\n\nApply a test source $i_t$ at the output with $v_{in}=0$. Then $v_X=i_t r_{O1}$, which gives:\n\n$$R_{out}=r_{O1}+r_{O2}+(g_{m2}+g_{mb2})r_{O1}r_{O2}\\approx g_{m2}r_{O2}\\,r_{O1}$$\n\nThe short-circuit transconductance is\n\n$$G_m=\\frac{g_{m1}r_{O1}[1+(g_{m2}+g_{mb2})r_{O2}]}{R_{out}}\\approx g_{m1}$$\n\nand $A_v=-G_mR_{out}$ reproduces the gain above.\n\nHow to interpret this:\n- M₂ multiplies the resistance at its source ($r_{O1}$) by about $g_{m2}r_{O2}$.\n- Equivalently, an output change reaches X attenuated by about $g_{m2}r_{O2}$. M₁'s $V_{DS}$ is therefore almost constant, so it is \"shielded.\"\n\n---\n\n## 4. Node X: a subtle point\n\nThe resistance looking up into M₂'s source, with load $R_L$ at its drain, is\n\n$$R_{up}=\\frac{R_L+r_{O2}}{1+(g_{m2}+g_{mb2})r_{O2}}$$\n\nWith an ideal I₁ ($R_L\\to\\infty$), $R_{up}\\to\\infty$. So:\n- $R_X = r_{O1}$.\n- The gain to X is $v_X/v_{in}=-g_{m1}r_{O1}$, as large as a full CS stage.\n\nConsequence: at low frequencies (below the output pole), this cascode does **not** reduce the Miller multiplication of $C_{GD1}$:\n\n$$C_{in}\\approx C_{GS1}+(1+g_{m1}r_{O1})\\,C_{GD1}$$\n\nThe familiar picture (\"X sees $1/g_{m2}$, so the gain to X is about $-g_{m1}/g_{m2}$\") holds only when the load impedance is low. That happens at high frequencies, where $C_L$ shorts the output:\n\n$$Z_{up}=\\frac{r_{O2}+1/(sC_L)}{1+g_{m2}r_{O2}}\\;\\to\\;\\frac{1}{g_{m2}}$$\n\n---\n\n## 5. Frequency response\n\nDefine the node capacitances:\n- $C_X=C_{DB1}+C_{GS2}+C_{SB2}+C_{GD1}$ (assuming an ideal input source).\n- $C_L=C_{DB2}+C_{GD2}+C_{load}$.\n\nNeglecting body effect:\n\n$$\\frac{v_{out}}{v_{in}}(s)=\\frac{-g_{m1}r_{O1}(1+g_{m2}r_{O2})\\left(1-\\dfrac{sC_{GD1}}{g_{m1}}\\right)}{1+s\\,(R_{out}C_L+r_{O1}C_X)+s^2\\,r_{O1}r_{O2}C_XC_L}$$\n\n| Feature | Location | Value |\n|---|---|---|\n| Dominant pole | Output | $\\omega_{p1}\\approx 1/(R_{out}C_L)$ |\n| Non-dominant pole | Node X | $\\omega_{p2}\\approx g_{m2}/C_X$ (near M₂'s $\\omega_T$) |\n| Right-half-plane zero | — | $\\omega_z=g_{m1}/C_{GD1}$ |\n| Gain-bandwidth | — | $\\approx g_{m1}/C_L$ |\n\nThe gain-bandwidth equals that of a CS stage. The cascode raises the DC gain by $g_{m2}r_{O2}$ and lowers the dominant pole by the same factor.\n\n---\n\n## 6. Noise\n\nM₂'s noise current is strongly degenerated by $r_{O1}$:\n- M₂'s output noise contribution is only $i_{n2}r_{O2}$.\n- M₁'s contribution is $i_{n1}r_{O1}(1+g_{m2}r_{O2})$.\n\nReferred to the input:\n\n$$\\overline{v^2_{n,in}}\\approx\\frac{4kT\\gamma}{g_{m1}}\\left(1+\\frac{1}{g_{m1}g_{m2}r_{O1}^2}\\right)\\approx\\frac{4kT\\gamma}{g_{m1}}$$\n\nSo at low frequencies the cascode device adds almost no noise. At high frequencies $C_X$ bypasses $r_{O1}$, and M₂'s noise starts to appear.\n\n---\n\n## 7. Practical remarks\n\n- A real I₁ has finite resistance $R_L$, giving $A_v\\approx-g_{m1}(R_{out}\\,\\|\\,R_L)$.\n- A single PMOS load ($R_L=r_{O3}$) would throw away the cascode's benefit. The load is therefore usually cascoded too (a telescopic cascode):\n$$A_v\\approx -g_{m1}\\big[(g_{m2}r_{O2}r_{O1})\\,\\|\\,(g_{m3}r_{O3}r_{O4})\\big]$$\n- **Benefits:** very high gain and output impedance, good output-to-input isolation, and a nearly single-pole response.\n- **Costs:** one extra $V_{OD}$ of headroom, an extra pole at X, and the need for a bias voltage $V_{b1}$.\n\n---\n\n## Summary\n\n| Quantity | Result |\n|---|---|\n| Voltage gain | $-g_{m1}r_{O1}[1+(g_{m2}+g_{mb2})r_{O2}]\\approx -g_{m1}g_{m2}r_{O1}r_{O2}$ |\n| $R_{out}$ | $r_{O1}+r_{O2}+(g_{m2}+g_{mb2})r_{O1}r_{O2}$ |\n| $G_m$ | $\\approx g_{m1}$ |\n| $R_X$ and gain to X | $r_{O1}$ and $-g_{m1}r_{O1}$ (with an ideal load) |\n| Minimum $V_{out}$ | $V_{OD1}+V_{OD2}$ |\n| Poles | $\\omega_{p1}\\approx 1/(R_{out}C_L)$, $\\omega_{p2}\\approx g_{m2}/C_X$ |\n| Gain-bandwidth | $\\approx g_{m1}/C_L$ |",
        "format": "markdown",
        "sha256": "3e1079d24986b4d033c50ac86d1315ceadd2871933f29c70f31f8dcf379b9c48"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the equivalent ideal-load gain expression specified by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 30194,
        "total_tokens": 31648,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 30194,
        "total_tokens": 31648,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Cascode Amplifier with an Ideal Current-Source Load\n\n**Device roles**\n- **M1** is a common-source transconductor. It converts v_in into a drain current.\n- **M2** is a common-gate (\"cascode\") device. V_b1 is a DC bias, so its gate is at AC ground. It passes M1's current to the output, holds V_X nearly constant, and multiplies the output resistance.\n- **I₁** sets the bias current. As an ideal source it is an open circuit for small signals.\n\n---\n\n## 1. DC bias and headroom\n\nBoth devices carry the same current:\n\n$$I_{D1}=I_{D2}=I_1,\\qquad V_X=V_{b1}-V_{GS2}$$\n\nThe saturation conditions are:\n- **M1:** $V_X\\ge V_{GS1}-V_{TH1}=V_{ov1}\\;\\Rightarrow\\; V_{b1}\\ge V_{GS2}+V_{ov1}$\n- **M2:** $V_{out}\\ge V_{b1}-V_{TH2}$\n\nV_TH2 includes body effect, since V_SB2 = V_X.\n\nWith V_b1 at its minimum:\n\n$$V_{out,min}=V_{ov1}+V_{ov2}$$\n\n- The cascode costs one more overdrive voltage of swing than a CS stage.\n- If V_b1 is too low, M1 enters triode and the gain collapses. If it is too high, output swing is wasted.\n- The upper swing limit is set by how I₁ is actually built, e.g., V_DD − |V_ov,p|.\n\n**DC output level.** The gain is enormous, so the range of V_in over which both devices stay saturated is only a few millivolts. The output DC level is therefore set by tiny mismatches between I₁ and I_D1. In practice the stage is used inside a negative-feedback loop that defines V_out.\n\n---\n\n## 2. Low-frequency small-signal analysis\n\n**Key observation:** the load is an open circuit, so the small-signal current through M1 and M2 is zero.\n\n**M1:**\n$$g_{m1}v_{in}+\\frac{v_X}{r_{O1}}=0\\;\\Rightarrow\\;\\frac{v_X}{v_{in}}=-g_{m1}r_{O1}$$\n\n**M2:**\n$$-(g_{m2}+g_{mb2})v_X+\\frac{v_{out}-v_X}{r_{O2}}=0\\;\\Rightarrow\\;\\frac{v_{out}}{v_X}=1+(g_{m2}+g_{mb2})r_{O2}$$\n\nCombining the two:\n\n$$\\boxed{A_v=-g_{m1}r_{O1}\\left[1+(g_{m2}+g_{mb2})r_{O2}\\right]\\approx-(g_{m1}r_{O1})(g_{m2}r_{O2})}$$\n\n**Interpretation.** The gain is roughly the square of the intrinsic gain: a CS stage with its intrinsic gain, followed by a CG stage with its intrinsic gain.\n- The impedance looking into M2's source is $(R_L+r_{O2})/[1+(g_{m2}+g_{mb2})r_{O2}]$.\n- With R_L → ∞ this is infinite, so M1 is loaded only by r_O1.\n- Although the gain to X is large, the actual swing at X is small: $v_X=v_{out}/(1+g_{m2}r_{O2})$. M1 therefore stays saturated.\n\n**Output resistance.** Apply a test source at the output with v_in = 0. The test current flows through r_O1, which gives:\n\n$$R_{out}=r_{O1}+r_{O2}+(g_{m2}+g_{mb2})r_{O1}r_{O2}\\approx g_{m2}r_{O2}r_{O1}$$\n\n**Check.** The result agrees with $A_v=-G_mR_{out}$, where\n\n$$G_m=\\frac{g_{m1}\\,r_{O1}[1+(g_{m2}+g_{mb2})r_{O2}]}{R_{out}}\\approx g_{m1}$$\n\n**Example.** With g_m r_O = 20 for both devices, A_v ≈ −420 (≈ 52 dB). A CS stage with the same load gives only −20 (26 dB).\n\n---\n\n## 3. Frequency response\n\n**Node capacitances**\n- At X: $C_X=C_{DB1}+C_{GD1}+C_{GS2}+C_{SB2}$\n- At the output: C_L, the total capacitance including C_GD2 and C_DB2.\n\n**Transfer function** (driven from an ideal source, neglecting the C_GD1 feedforward path):\n\n$$A(s)=\\frac{A_0}{1+s\\,(R_{out}C_L+r_{O1}C_X)+s^2\\,r_{O1}r_{O2}C_XC_L}$$\n\n**Poles and zero**\n- **Dominant pole (output):** $\\omega_{p1}\\approx 1/(R_{out}C_L)$\n- **Non-dominant pole (node X):** $\\omega_{p2}\\approx (g_{m2}+g_{mb2})/C_X$, a fraction of M2's f_T.\n- **Right-half-plane zero:** $\\omega_z=g_{m1}/C_{GD1}$, far out.\n\n**Gain-bandwidth.** $\\text{GBW}\\approx A_0\\,\\omega_{p1}\\approx g_{m1}/C_L$, the same as a CS stage.\n- Cascoding raises DC gain by about g_m2·r_O2 without sacrificing GBW.\n- The only added pole is at a very high frequency.\n- In unity-gain feedback, the phase margin is approximately $90^\\circ-\\tan^{-1}\\!\\big[(g_{m1}/C_L)/(g_{m2}/C_X)\\big]$.\n\n**Miller effect: a subtle point.** The gain from the input to X is\n\n$$\\frac{v_X}{v_{in}}(s)\\approx -g_{m1}r_{O1}\\frac{1+s\\,r_{O2}C_L}{(1+s/\\omega_{p1})(1+s/\\omega_{p2})}$$\n\n- **At low frequencies,** |A_X| = g_m1·r_O1. So C_in ≈ C_GS1 + (1 + g_m1·r_O1)C_GD1. The cascode does *not* suppress the Miller effect here, unlike the resistive-load case.\n- **For ω ≫ 1/(r_O2·C_L),** C_L shunts the output and the impedance at X falls to about 1/(g_m2 + g_mb2). Then A_X → −g_m1/(g_m2 + g_mb2) ≈ −1 and C_in → C_GS1 + 2C_GD1. This holds at high frequencies, where it actually matters.\n\n---\n\n## 4. Noise (brief)\n\n- The noise of M2 is degenerated by r_O1. Its input-referred contribution is smaller than M1's by roughly g_m2·r_O1, so it is negligible at low frequencies.\n- Input-referred noise is therefore set mainly by M1 and by the noise current of the real load:\n\n$$\\overline{v_{n,in}^2}\\approx \\frac{4kT\\gamma}{g_{m1}}+\\frac{\\overline{i_{n,I_1}^2}}{g_{m1}^2}\\;(+\\text{flicker})$$\n\n---\n\n## 5. Practical remarks\n\n- **I₁ must match R_out.** A real I₁ needs an impedance comparable to R_out, which means a PMOS cascode. That gives $A_v\\approx -g_{m1}[(g_{m2}r_{O2}r_{O1})\\,\\|\\,(g_{m3}r_{O3}r_{O4})]$. A single PMOS source with r_O3 would collapse the gain to about −g_m1·r_O3, wasting the cascode.\n- **Bias generation.** V_b1 is normally produced by a bias or replica network so that it sits at about V_GS2 + V_ov1 plus a small margin.\n- **Differential version.** The differential form of this stage is the telescopic op amp.\n\n---\n\n## Summary\n\n| Quantity | Result |\n|---|---|\n| Voltage gain | ≈ −g_m1·r_O1·(g_m2 + g_mb2)·r_O2 ~ (g_m r_O)² |\n| Output resistance | ≈ (g_m2 + g_mb2)·r_O2·r_O1 |\n| Minimum V_out | V_ov1 + V_ov2 |\n| Dominant pole | 1/(R_out·C_L) |\n| Non-dominant pole | (g_m2 + g_mb2)/C_X |\n| Gain-bandwidth | ≈ g_m1/C_L |",
        "format": "markdown",
        "sha256": "bf6da1bacfe6e0005e6249999bdc517f7ae8a970a82f9db1ab2015e9e4259a08"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source input device and M2 as the common-gate cascode, and derives the equivalent ideal-load gain including body effect. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 25002,
        "total_tokens": 26456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 25002,
        "total_tokens": 26456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# No, it is not a cascode\n\nIt looks like one, since two transistors are stacked and the upper one's gate is at a bias voltage. But the device types change how it works.\n\n## What the circuit actually is\n\n- **M2** is an NMOS (arrow pointing out of the source), so its source is its bottom terminal.\n- **M1** is a PMOS (arrow pointing into the source), so its source is its top terminal.\n\nThe two **sources** are therefore tied together at the middle node X, and M1's **drain** is grounded.\n\nIn a true cascode, the input device is a common-source stage, and its *drain* feeds the source of a common-gate device. Here:\n\n- M1 has its drain at ground and its source at X, so it is a **source follower** (common drain).\n- M2 has its gate at a fixed bias, so it is a **common-gate** stage.\n\nThe circuit is a **CD–CG cascade**. It behaves like a differential pair driven on one side with the output taken from the other side, here built with complementary devices. It is not a CS–CG cascode.\n\n## Consequences (small-signal)\n\n**Voltage at X.** M1 drives the impedance looking into M2's source, which is about 1/g_m2:\n\n$$\\frac{v_X}{v_{in}} = \\frac{g_{m1}}{g_{m1}+g_{m2}}$$\n\n**Gain.** The circuit is non-inverting:\n\n$$\\frac{v_{out}}{v_{in}} = +\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D = \\frac{R_D}{1/g_{m1}+1/g_{m2}}$$\n\nFor equal transconductances this is about +g_m·R_D/2. A cascode would give about −g_m1·R_D.\n\n**Output resistance.** With Vin grounded, M2's source sees only about 1/g_m1 (looking into M1's source), not r_o1:\n\n$$R_{out} \\approx r_{o2} + (1+g_{m2}r_{o2})\\frac{1}{g_{m1}} \\approx \\left(1+\\frac{g_{m2}}{g_{m1}}\\right)r_{o2} \\approx 2r_{o2}$$\n\nA real cascode gives R_out ≈ g_m2·r_o2·r_o1.\n\n## Conclusion\n\nThe defining feature of a cascode is boosting the output impedance by the intrinsic gain of the cascode device. That feature, and the high gain it enables with a current-source load, is missing here.\n\nTwo other points:\n\n- The bias current is set by Vb1 − Vin = V_GS2 + V_SG1, not by the input device alone.\n- The input sees no Miller multiplication. That is because M1's drain is grounded (follower action), not because of cascoding.",
        "format": "markdown",
        "sha256": "29c0ff4f7da38b8c5256619a96546e9fddaff30990ed953bbda81a84568a991e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says it is not a cascode and identifies M1 as a PMOS source follower, not a common-source input device. It also correctly notes the lack of cascode resistance boosting; the additional small-signal details do not undermine the answer.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 10037,
        "total_tokens": 11563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9134,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 10037,
        "total_tokens": 11563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9134,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# No, it is not a cascode\n\nIt looks like one because M₂ is stacked on M₁ with its gate at a bias voltage. But look at the arrows:\n\n- **M₂ is an NMOS.** Its source is at the bottom, node X.\n- **M₁ is a PMOS.** Its source is the *top* terminal, tied to X, and its **drain is grounded**.\n\n## Why that matters\n\nA cascode is a **common-source** input device followed by a **common-gate** device. The input transistor's source is at ac ground, and its **drain** (a high-impedance node, about r_o1) feeds the source of the CG device.\n\nHere, M₁'s drain is at ac ground, and its **source** drives node X. So M₁ is a **source follower**. The circuit is a **source follower (CD) driving a common-gate stage (CG)**. That is essentially how a signal passes through a differential pair, not how a cascode works.\n\n## Consequences\n\n**1. No output-impedance boost.**\nLooking down from X, M₂ sees only the low impedance of M₁'s source:\n\n$$Z_X = \\frac{1}{g_{m1}} \\parallel r_{o1} \\approx \\frac{1}{g_{m1}}$$\n\nThe impedance looking into M₂'s drain is therefore:\n\n$$R_{out} = r_{o2} + (1+g_{m2}r_{o2})Z_X \\approx r_{o2}\\left(1+\\frac{g_{m2}}{g_{m1}}\\right) \\approx 2r_{o2} \\quad (\\text{if } g_{m1}=g_{m2})$$\n\nA true cascode gives about g_m2·r_o2·r_o1.\n\n**2. The gain is non-inverting.**\nWhen V_in rises, V_X follows it up. This lowers V_GS2, so the current I_D falls and V_out rises. Neglecting channel-length modulation and body effect:\n\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{R_D}{\\dfrac{1}{g_{m1}} + \\dfrac{1}{g_{m2}}}$$\n\nThis equals g_m·R_D/2 for equal transconductances. A true cascode gives about −g_m1·R_D.\n\n**3. M₁ is not a transconductor with high output impedance.**\nIts current depends on V_X, which M₁ and M₂ set jointly. The bias current follows from V_b1 − V_in = V_GS2 + |V_GS1|.\n\n## How to make it a real cascode\n\n- **Simple cascode:** replace M₁ with an NMOS whose source is at ground and whose drain connects to X (CS + CG).\n- **Folded cascode with a PMOS input:** connect M₁'s source to V_DD (or a current source) and its drain to X, and add a current source from X to ground.",
        "format": "markdown",
        "sha256": "23382c435904111bd4e18851b4a49a66c653f484959b9c11f085a7304c8199e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower, not a common-source input device, and explains that this prevents the cascode’s large output-resistance boost. The additional resistance and gain analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 8411,
        "total_tokens": 9937,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7488,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 8411,
        "total_tokens": 9937,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7488,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# No, it is not a cascode\n\nIt looks like one, with two stacked transistors and the upper one's gate tied to a bias voltage V_b1. But the device types and terminal connections are different.\n\n## Identifying the devices\n\n- **M2** is an NMOS (arrow pointing out of its lower terminal). It has its gate at V_b1, its source at the middle node X, and its drain at V_out. It works as a **common-gate** stage.\n- **M1** is a **PMOS** (arrow pointing into its upper terminal). Its **source**, not its drain, connects to node X, and its **drain is grounded**.\n\nWith its drain at ac ground, input at the gate, and output at the source, M1 is a **source follower (common-drain)**, not a common-source transconductor. The circuit is therefore a PMOS source follower driving an NMOS common-gate stage, a cascade rather than a cascode.\n\n## Consequences\n\n**1. The gain is non-inverting.** The same current flows through both devices, and V_GS2 + V_SG1 = V_b1 − V_in. Ignoring channel-length modulation:\n\n$$\nv_X = \\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in}, \\qquad\nA_v = +\\frac{R_D}{\\dfrac{1}{g_{m1}}+\\dfrac{1}{g_{m2}}}\n$$\n\nNode X follows the input. For g_m1 = g_m2 = g_m, the gain is g_m R_D/2. A true cascode would give −g_m1 R_D.\n\n**2. The output impedance is not boosted.** Looking down from the source of M2, the impedance is 1/g_m1 ∥ r_o1 ≈ 1/g_m1, which is low. In a cascode it would be r_o1, which is high. So:\n\n$$\nR_{out} = r_{o2} + (1+g_{m2}r_{o2})\\left(\\frac{1}{g_{m1}}\\Big\\|\\, r_{o1}\\right) \\approx r_{o2}\\left(1+\\frac{g_{m2}}{g_{m1}}\\right)\\approx 2r_{o2}\n$$\n\nA cascode would give approximately g_m2 r_o2 r_o1.\n\n**3. The intrinsic gain is that of a single transistor.** With an ideal current-source load:\n\n$$\nA_{v,max} \\approx \\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}} \\cdot r_{o2}\\,\\frac{g_{m1}+g_{m2}}{g_{m1}} = g_{m2}r_{o2}\n$$\n\nA cascode would reach about (g_m r_o)².\n\n## Summary\n\nThe circuit is not a folded cascode either. That would require M1's drain to feed node X, with a separate bias current source. It behaves more like a differential pair whose two halves, M1 and M2, are stacked in series, with V_in on one gate and V_b1 on the other.\n\nIts low input capacitance comes from follower action: C_GD1 goes straight to ground and C_GS1 is partially bootstrapped. It does not come from cascoding.",
        "format": "markdown",
        "sha256": "ba003bd0653880c2902fc6b4397b4eda68688f5b5d711716061882f5e5c69957"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower, not a common-source stage, and explains that the circuit lacks cascode output-resistance boosting. Its output-resistance expression is also consistent with the golden solution.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 10155,
        "total_tokens": 11681,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 10155,
        "total_tokens": 11681,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Why the Miller Effect Is Smaller in a Cascode\n\n**Short answer:** The Miller multiplication of a capacitor depends on the voltage gain *across that capacitor*, not on the gain of the whole amplifier. In a cascode, the input transistor's collector (or drain) drives the low impedance of the common-base (common-gate) transistor, so the gain across its feedback capacitance is only about −1. The large voltage swing appears at a node that has no capacitive path back to the input.\n\n## 1. The Miller effect in a plain common-emitter stage\n\nThe base–collector capacitance Cμ (Cgd for a MOSFET) connects the input to the output. The output swings opposite to the input with gain −gm·RL. So a change Δv at the base produces a change of (1 + gm·RL)·Δv across Cμ. The source must supply that much more charge, and Cμ looks magnified at the input:\n\n    Cin = Cπ + Cμ·(1 + gm·RL)\n\nWith gm·RL = 100, a 1 pF Cμ looks like 101 pF. Combined with the source resistance, this creates a low-frequency pole that usually limits the bandwidth.\n\n## 2. The cascode\n\n```\n           VCC\n            │\n            RL\n            │\n            ├───── vout   (large swing ≈ −gm·RL·vin)\n            │\n  VBIAS ── Q2   common-base (base at AC ground)\n            │\n            ├── X         (small swing ≈ −vin)\n            │\n   vin ─── Q1   common-emitter\n            │\n           GND\n```\n\nQ1 still converts the input voltage into a signal current, gm1·vin. Its collector no longer drives RL, though. It drives the emitter of Q2.\n\n## 3. Why the Miller multiplication is small\n\n**Q1's collector sees a very low impedance.** Looking into Q2's emitter, you see about 1/gm2, typically tens of ohms. The gain from Q1's base to node X is therefore:\n\n    vx/vin ≈ −gm1 · (1/gm2) ≈ −1     (same current in both, so gm1 ≈ gm2)\n\nSo Cμ1 is multiplied by only (1 + gm1/gm2) ≈ 2:\n\n    Cin ≈ Cπ1 + 2·Cμ1\n\nPhysically, Q2 \"pins\" node X. Its base is fixed and its VBE changes very little with current. Node X moves only about as much as the input, not gm·RL times as much. With little voltage change across Cμ1, little extra charge is needed.\n\n**The big swing appears where it can't feed back.** Q2 is a current buffer with current gain α ≈ 1. It passes gm1·vin to RL, so the full gain (≈ −gm1·RL) appears at Q2's collector. Q2's own Cμ2, however, connects that collector to Q2's base, which is at AC ground. Cμ2 is therefore just a capacitance from output to ground, with no multiplication. The grounded base also acts as a shield between output and input.\n\n**The extra node is fast.** Node X has low impedance (~1/gm2), so its capacitance creates a pole on the order of fT, far above the useful band.\n\nIn effect, the cascode splits the common-emitter stage's two jobs:\n- Q1 provides transconductance without voltage gain.\n- Q2 plus RL provide voltage gain at a node isolated from the input.\n\nYou keep the gain but lose the large Miller capacitance.\n\n## 4. Numerical example\n\nTake gm·RL = 200, Cμ = 2 pF and Cπ = 10 pF.\n\n| Stage | Input capacitance |\n|---|---|\n| Common-emitter | 10 + 2·201 ≈ 412 pF |\n| Cascode | 10 + 2·2 ≈ 14 pF |\n\nThat is about 30× less input capacitance, so the input pole moves up by roughly 30×.\n\n## 5. Caveats\n\n- **The output pole remains.** The pole set by RL and the output capacitance (Cμ2 + CL) is unchanged and often becomes the new bandwidth limit.\n- **High-impedance loads change the picture at low frequencies.** With a current-source load (common in CMOS op-amps), the impedance into Q2's emitter (M2's source) is about 1/gm2 + RL/(gm2·ro2). This can far exceed 1/gm2, so the gain at node X can be large. At high frequencies, where the Miller effect matters, the load capacitance lowers the output impedance and the multiplication falls back toward ~2.\n\n**Side benefit:** Little of the output couples back to the input, so the cascode has much better reverse isolation. This is why it is popular in RF and tuned amplifiers: it is more stable, and input and output tuning interact less.",
        "format": "markdown",
        "sha256": "d7e3d07e8d9b17b1e7f393a8ef19b10b1d0bb8c8d7053be66bb7aa586d1afa27"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the roughly −1 gain from the input to that node, yielding a Miller factor of about 2 rather than the full stage gain. The phrase that there is little voltage change across Cμ1 is imprecise—the answer otherwise correctly gives the 2× factor—and is a minor overstatement.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 11475,
        "total_tokens": 11505,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9898,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 11475,
        "total_tokens": 11505,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9898,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Why the Miller Effect Is Smaller in a Cascode\n\nMiller multiplication depends on the voltage gain *across the capacitor*, not on the amplifier's overall gain. A cascode makes the capacitor connected to the input see a gain of only about −1. The node with the large voltage swing has its capacitance tied to AC ground instead.\n\n(BJT notation below. For MOSFETs, read C_gd for C_μ and common-source/common-gate for common-emitter/common-base.)\n\n## Where the Miller effect comes from\n\nWhen a capacitance C bridges the input and output of an inverting stage with gain −A, the current it draws is\n\ni = C·d(v_in − v_out)/dt = C(1 + A)·dv_in/dt\n\nSo the input sees an effective capacitance of C(1 + A).\n\nIn a common-emitter amplifier, the base–collector capacitance C_μ is exactly such a bridge. The gain A = g_m·R_L can easily be 100, so a 1 pF C_μ loads the input like a 100 pF capacitor. The pole this forms with the source resistance usually sets the bandwidth, and the more gain you design in, the lower that pole falls.\n\n## What the cascode changes\n\n```\n          V_CC\n           │\n           R_L\n           │\n           ├──── v_out   swings ≈ −g_m·R_L·v_in\n           │\n V_bias ──[Q2]           common base (base at AC ground)\n           │\n           ├──── X       sees ≈ 1/g_m2, swings ≈ −v_in\n           │\n   v_in ──[Q1]           common emitter\n           │\n          GND\n```\n\n1. **The input transistor sees almost no voltage gain.**\n   - Q1 no longer drives R_L. It drives the emitter of Q2, which (with Q2's base held fixed) has a resistance of only about 1/g_m2. That is roughly 25 Ω at 1 mA, versus kilohms for R_L.\n   - The gain from Q1's base to its collector is therefore only A_X ≈ −g_m1/g_m2 ≈ −1, since both transistors carry the same current and have nearly the same g_m.\n   - So C_μ1 is multiplied by about 2, not by (1 + g_m·R_L).\n   - Physical picture: Q1 and Q2 carry the same signal current, so their V_BE values must change by the same amount. Q2's base is fixed, so its emitter (Q1's collector) moves by only about −v_in.\n\n2. **The voltage gain still happens, but across a grounded capacitor.**\n   - Q2 acts as a current buffer. It passes Q1's signal current (×α ≈ 1) into R_L, so v_out ≈ −g_m1·R_L·v_in, the same gain as a plain common-emitter stage.\n   - The large swing appears at Q2's collector. But the capacitance there, C_μ2, connects to Q2's base, which is at AC ground.\n   - A capacitor with one end held still just adds its actual value to the node. There is nothing to multiply.\n\n3. **Q2's grounded base shields the output from the input.** There is no significant capacitance from the output node back to Q1's base, so the large output swing cannot couple back to the input.\n\nThe cascode divides the work. Q1 converts voltage to current at a node with almost no voltage gain. Q2 converts that current into a large voltage at a node whose capacitance goes to ground. The big gain never appears across a capacitor connected to the input.\n\n## Effect on the poles\n\n- **Input:** ω ≈ 1/[R_s(C_π1 + 2C_μ1)]. The Miller term is fixed at about 2C_μ1, regardless of gain.\n- **Node X:** ω ≈ g_m2/(C_π2 + 2C_μ1 + C_cs1). This is on the order of ω_T, because the node impedance is only about 1/g_m.\n- **Output:** ω ≈ 1/[R_L(C_μ2 + C_cs2 + C_L)]. There is no Miller multiplication.\n\n**Example:** g_m = 40 mS, R_L = 2.5 kΩ (gain of 100), C_π = 10 pF, C_μ = 1 pF, R_s = 1 kΩ.\n\n| Stage | Input capacitance | Input pole |\n|---|---|---|\n| Common-emitter | 10 + 1×101 = 111 pF | ≈ 1.4 MHz |\n| Cascode | 10 + 1×2 = 12 pF | ≈ 13 MHz |\n\nThe midband gain is the same, but the input pole is about 9× higher.\n\n## Caveats\n\n- **The \"×2\" assumes a moderate load.** With a very high-impedance load, such as a current-source or cascoded active load, the resistance into Q2's emitter becomes roughly 1/g_m2 + R_L/(g_m2·r_o2). At low frequencies, the gain to node X can then exceed 1. At high frequencies, the load capacitance shunts R_L and the multiplier drops back toward 2, which is where it matters.\n- **MOS cascodes:** the body effect gives A_X ≈ −g_m1/(g_m2 + g_mb2), so the multiplier is slightly under 2 for equal-size devices.\n- **Cost and side benefits:** the cascode uses extra headroom (one more V_CE,sat or V_DS,sat) and needs a bias voltage. In exchange, it also raises output resistance and improves reverse isolation.",
        "format": "markdown",
        "sha256": "d32103bfc52474da509dd5a6675707f3fd5aab1e1e3182819525a30e0840d561"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the resulting gain of about −1 across the input transistor’s Cgd, giving roughly 2× rather than full-stage Miller multiplication. The extra discussion is consistent; the loose phrase “almost no voltage gain” is clarified by the stated −1 gain.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 24864,
        "total_tokens": 24894,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23045,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 24864,
        "total_tokens": 24894,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23045,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Why the Miller Effect Is Smaller in a Cascode\n\n**Key idea:** Miller multiplication depends on the voltage gain *across the bridging capacitor*, not on the amplifier's overall gain. In a cascode, the input transistor's feedback capacitance sees a gain of only about −1. The large voltage gain develops at a different node, where the capacitance goes to AC ground.\n\n### 1. The Miller effect in a plain common-emitter stage\n\nIn a common-emitter (or common-source) amplifier, the collector–base capacitance Cμ (Cgd in a MOSFET) connects the input directly to the output. If the gain is Av = −gm·RL, an input change v produces an output change of −|Av|·v. The voltage across Cμ therefore changes by\n\nv − (−|Av|·v) = (1 + |Av|)·v\n\nThe source must supply (1 + |Av|) times the current it would supply to a grounded capacitor, so the input capacitance is\n\nCin = Cπ + (1 + gm·RL)·Cμ\n\nWith a gain of 100, a 2 pF Cμ looks like about 200 pF. Combined with the source resistance, this creates a low-frequency pole that usually sets the bandwidth.\n\n### 2. What the cascode changes\n\n```\n           VCC\n            │\n           ┌┴┐\n           │ │ RL\n           └┬┘\n            ├───── Vout  ← large swing: ≈ −gm·RL·vin\n            │\n         ┌──┴──┐\n  VB ────┤ Q2  │   common base (base at AC ground)\n         └──┬──┘\n            ├───── X     ← small swing: ≈ −vin   (R ≈ 1/gm2)\n         ┌──┴──┐\n Vin ────┤ Q1  │   common emitter\n         └──┬──┘\n            │\n           GND\n```\n*(BJT version shown; the MOSFET common-source + common-gate cascode works the same way.)*\n\nQ1's collector no longer drives the load. Instead, it drives the emitter of Q2, a common-base stage whose base is held at a fixed bias. The resistance looking into an emitter is only about 1/gm2. Both transistors carry the same current, so gm1 ≈ gm2. The gain from the input to node X is therefore\n\nvx/vin ≈ −gm1 · (1/gm2) ≈ −1\n\nIntuitively, Q2's base is fixed, so its emitter is pinned about one VBE below it, and VBE barely changes with current. Q1's collector swings only about as much as the input (inverted), not by the full output swing. Cμ1 sees a voltage change of v − (−v) = 2v, so\n\nCin ≈ Cπ1 + 2·Cμ1\n\nIn the example above, the Miller term drops from about 200 pF to about 4 pF.\n\n### 3. The gain isn't lost; it's relocated\n\nQ1 still converts the input voltage into a signal current gm1·vin. Q2 acts as a current buffer: it passes that current to RL with a current gain of α ≈ 1. The overall gain is still about −gm1·RL, the same as the CE stage.\n\nWhat changes is *where* the large voltage swing appears: at Q2's collector. The capacitance at that node, Cμ2, connects to Q2's base, which is at AC ground. A capacitor to ground isn't Miller-multiplied; it just loads the output at face value.\n\nSo no capacitor bridges the large output swing back to the input. Q2's grounded base acts as a shield between them. This is also why cascodes have much better reverse isolation, which is valuable in RF amplifiers.\n\n### 4. The other poles stay out of the way\n\n- **Node X:** low resistance (~1/gm2) with roughly Cπ2 + 2Cμ1, giving a pole on the order of the transistor's fT.\n- **Output node:** RL with Cμ2 + CL, giving about the same output pole as a CE stage.\n\nNet result: roughly the gain of a CE stage, with the dominant input pole pushed to a much higher frequency.\n\n### Caveats\n\n- **Headroom:** the extra transistor costs another VCE(sat) or VDS(sat), which reduces output swing.\n- **High-impedance loads:** the \"1/gm2 at node X\" picture assumes a moderate load. With a very high-impedance load, such as an active current-source load, the resistance at X can be much larger at low frequencies. For a MOSFET it is (RL + ro2)/(1 + gm2·ro2). In that case the gain to X isn't ≈ −1 at low frequencies. At higher frequencies, the output-node capacitance pulls the load impedance down and the Miller suppression returns.",
        "format": "markdown",
        "sha256": "b0fc012c5a367e6431c4017609025ffc463baf2f274a28d4ce6fb282972cab4c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that the cascode creates a low-impedance node at the input transistor’s drain, so the gain across its feedback capacitance is only about −1 and the Miller factor is about 2 rather than the full stage gain. The additional caveats do not undermine the central explanation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 27193,
        "total_tokens": 27223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25642,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 27193,
        "total_tokens": 27223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25642,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of a Common-Gate Amplifier with a PMOS Current-Source Load\n\n## 1. Identifying the circuit\n\n- **M2 (NMOS):** the gate is tied to the bias V_b1, which is an AC ground. The signal enters at the **source**, and the output is taken at the **drain**. This makes M2 a **common-gate (CG) amplifier**.\n- **M1 (PMOS):** the source is at V_DD and the gate is at the fixed bias V_b2. M1 is a **current-source load** with small-signal resistance r_o1.\n\nThe bias current I_D flows from V_DD through M1 and M2, then into the input source.\n\n## 2. DC operating point\n\n$$I_D \\approx \\tfrac12\\mu_pC_{ox}\\left(\\tfrac{W}{L}\\right)_1(V_{DD}-V_{b2}-|V_{THP}|)^2,\\qquad V_{in,DC}=V_{b1}-V_{GS2}$$\n\nV_TH2 is raised by the body effect because V_SB2 = V_in.\n\n**Both devices saturated (allowed output swing):**\n\n$$V_{in}+V_{OD2}\\;=\\;V_{b1}-V_{TH2}\\;\\le\\;V_{out}\\;\\le\\;V_{b2}+|V_{THP}|\\;=\\;V_{DD}-|V_{OD1}|$$\n\n**Practical remarks:**\n- The input driver must be able to **sink I_D**.\n- The current is effectively set twice: by V_b2 through M1, and by V_b1 − V_in through M2. Only channel-length modulation reconciles the two, so V_out,DC is very sensitive. In practice it must be fixed by feedback.\n- **Large-signal transfer curve:**\n  - At low V_in, M2 is in triode and V_out ≈ V_in.\n  - In the middle there is a steep, positive-slope, high-gain region.\n  - At high V_in, M1 enters triode and V_out → V_DD.\n  - The stage is therefore **non-inverting**.\n\n## 3. Small-signal voltage gain\n\nThe bulk of M2 is at ground, so v_gs2 = v_bs2 = −v_in.\n\nRaising the source by v_in reduces M2's current by (g_m2 + g_mb2)v_in. That current must flow through r_o1 and r_o2. KCL at the output gives:\n\n$$(g_{m2}+g_{mb2})v_{in}=\\frac{v_{out}}{r_{o1}}+\\frac{v_{out}-v_{in}}{r_{o2}}$$\n\n$$\\boxed{A_v=\\frac{[1+(g_{m2}+g_{mb2})r_{o2}]\\,r_{o1}}{r_{o1}+r_{o2}}\\approx (g_{m2}+g_{mb2})(r_{o1}\\parallel r_{o2})}$$\n\n- The gain is positive.\n- With r_o1 ≈ r_o2, it is about half the intrinsic gain of M2.\n- It is comparable to a CS stage with a current-source load. It is slightly larger because the body effect *helps* here.\n\n## 4. Input resistance\n\nApply a test voltage v_x and inject current i_x into the source.\n\n1. All of i_x flows through M2 and then r_o1, so v_out = i_x·r_o1.\n2. For M2: i_x = (g_m2 + g_mb2)v_x + (v_x − v_out)/r_o2.\n\nSolving:\n\n$$\\boxed{R_{in}=\\frac{r_{o1}+r_{o2}}{1+(g_{m2}+g_{mb2})r_{o2}}\\approx\\frac{1}{g_{m2}+g_{mb2}}+\\frac{r_{o1}}{(g_{m2}+g_{mb2})r_{o2}}}$$\n\nThe load resistance, divided by M2's intrinsic gain, appears at the input. Consequences:\n\n| Load condition | R_in |\n|---|---|\n| r_o1 = r_o2 | ≈ 2/(g_m2 + g_mb2), **twice** the textbook \"1/g_m\" |\n| Ideal current source (r_o1 → ∞) | **→ ∞**, because M2's current cannot change, so no signal current can enter |\n| Cascode load (≈ g_m r_o²) | ≈ r_o, which is why the cascode node of a high-gain cascode is not a low-impedance node |\n| High frequency (C_out shunts r_o1) | falls toward 1/(g_m2 + g_mb2) |\n\n## 5. Output resistance and finite source resistance\n\n- **Ideal voltage drive:** R_out = r_o1 ∥ r_o2.\n- **Driver with resistance R_S:**\n\n$$R_{out}=r_{o1}\\parallel\\{r_{o2}+[1+(g_{m2}+g_{mb2})r_{o2}]R_S\\}$$\n\n$$A_v=\\frac{[1+(g_{m2}+g_{mb2})r_{o2}]\\,r_{o1}}{r_{o1}+r_{o2}+[1+(g_{m2}+g_{mb2})r_{o2}]R_S}=A_{v0}\\frac{R_{in}}{R_{in}+R_S}$$\n\nFor R_S ≫ R_in, A_v → r_o1/R_S. The circuit then acts as a **current buffer**: the input current v_in/R_S is passed to the output and develops a voltage across r_o1.\n\n## 6. Frequency response\n\n- The gate is at AC ground, so there is **no Miller multiplication**. C_GD2 simply loads the output, and the stage is inherently wideband.\n- **Input pole:** ω_in ≈ 1/[(R_S ∥ R_in)(C_GS2 + C_SB2)]. It disappears for ideal voltage drive.\n- **Output pole:** ω_out = 1/(R_out·C_out), with C_out = C_GD1 + C_DB1 + C_GD2 + C_DB2 + C_L. This pole is usually dominant.\n- **Gain-bandwidth:** with ideal drive, A_v(s) ≈ A_v0/(1 + sR_outC_out), so GBW ≈ (g_m2 + g_mb2)/C_out.\n\n## 7. Noise (thermal)\n\n$$\\overline{v_{n,in}^2}\\approx4kT\\gamma\\frac{g_{m1}+g_{m2}}{(g_{m2}+g_{mb2})^2},\\qquad \\overline{i_{n,in}^2}\\approx4kT\\gamma\\,g_{m1}$$\n\n- When driven from a high impedance, M2's noise does not reach the output.\n- The load's noise current appears directly at the input. Keep g_m1 small by using a large |V_OD1|.\n- If V_b2 is referenced to ground, supply noise is amplified by roughly g_m1(r_o1 ∥ r_o2). V_b2 should therefore be generated relative to V_DD.\n\n## Summary (r_o1 = r_o2 = r_o, g_m·r_o ≫ 1)\n\n| Quantity | Result |\n|---|---|\n| A_v | ≈ (g_m2 + g_mb2)·r_o/2, non-inverting |\n| R_in | ≈ 2/(g_m2 + g_mb2) |\n| R_out | r_o/2 |\n\n**Worked example:** g_m2 = 1 mS, g_mb2 = 0.2 mS, r_o1 = r_o2 = 20 kΩ.\n\n- A_v = 12.5\n- R_in = 1.6 kΩ (not 0.83 kΩ)\n- R_out = 10 kΩ",
        "format": "markdown",
        "sha256": "93943dfb08d1c67da98e7e97dc01ab3d9cd47af0b16ada9b09bdc65e7d5e8e12"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, identifies both bias voltages, and gives the non-inverting gain and low input resistance. Its gain expression is equivalent to the golden result, including body effect.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1338,
        "output_tokens": 27825,
        "total_tokens": 29163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25239,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1338,
        "output_tokens": 27825,
        "total_tokens": 29163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25239,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of a Common-Gate Amplifier with a PMOS Current-Source Load\n\n## Topology\n\n- **M2 (NMOS)** is the amplifying device. Its gate is held at the DC bias $V_{b1}$, so the gate is at AC ground. The signal enters at the **source** and the output is taken at the **drain**. This makes it a **common-gate (CG) stage**.\n- **M1 (PMOS)** has a fixed $V_{SG}=V_{DD}-V_{b2}$, so it is a **current-source (active) load**. In the small-signal model it is simply $r_{O1}$ to AC ground.\n\nAssumptions: M2's bulk is at ground, so body effect is present. M1's bulk is at $V_{DD}$. Both devices are in saturation.\n\n---\n\n## 1. DC operating point\n\n**Bias current.** M1 sets the current:\n$$I_D=\\tfrac12\\mu_pC_{ox}\\left(\\tfrac{W}{L}\\right)_1\\left(V_{DD}-V_{b2}-|V_{THP}|\\right)^2$$\n\n**Required input DC level.** M2 must carry the same current, which fixes the DC voltage at the input:\n$$V_{IN}=V_{b1}-V_{TH2}-\\sqrt{\\frac{2I_D}{\\mu_nC_{ox}(W/L)_2}}$$\nHere $V_{TH2}$ is raised by body effect, because $V_{SB}=V_{IN}$.\n\n**Input DC path.** $I_D$ flows *out of* M2's source. The driving source must therefore provide a DC path that sinks $I_D$.\n\n**Output swing.** For both transistors to stay saturated:\n$$V_{b1}-V_{TH2}\\le V_{out}\\le V_{b2}+|V_{THP}| \\quad\\Longleftrightarrow\\quad V_{IN}+V_{ov2}\\le V_{out}\\le V_{DD}-|V_{ov1}|$$\n\n**Caveat: the output DC level is poorly defined.** The output node sits between two current sources, so its DC level is set only by channel-length modulation.\n- Any error in $V_{IN}$, $V_{b1}$, $V_{b2}$, or device mismatch is multiplied by the gain at the output.\n- In practice, the operating point must be fixed by feedback, such as CMFB or a replica-bias loop.\n\n---\n\n## 2. Small-signal voltage gain\n\nWith $v_g=v_b=0$ and $v_s=v_{in}$, we have $v_{gs2}=v_{bs2}=-v_{in}$. Applying KCL at the output:\n$$\\frac{v_{out}}{r_{O1}}+\\frac{v_{out}-v_{in}}{r_{O2}}-(g_{m2}+g_{mb2})v_{in}=0$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{\\left[1+(g_{m2}+g_{mb2})r_{O2}\\right]r_{O1}}{r_{O1}+r_{O2}}\\approx (g_{m2}+g_{mb2})(r_{O1}\\parallel r_{O2})}$$\n\nEquivalently, $A_v=G_mR_{out}$, with $G_m=g_{m2}+g_{mb2}+1/r_{O2}$ and $R_{out}=r_{O1}\\parallel r_{O2}$.\n\nKey properties:\n- **Non-inverting.**\n- **Magnitude similar to a CS stage** with the same load. It is slightly larger because body effect *helps*: the source drives both $v_{gs}$ and $v_{bs}$.\n- **Ideal current-source load** ($r_{O1}\\to\\infty$): $A_v\\to 1+(g_{m2}+g_{mb2})r_{O2}$.\n\n---\n\n## 3. Input resistance\n\nThe input current has no path other than through M2 into $r_{O1}$, so $i_{in}=v_{out}/r_{O1}$. Hence:\n$$\\boxed{R_{in}=\\frac{r_{O1}}{A_v}=\\frac{r_{O1}+r_{O2}}{1+(g_{m2}+g_{mb2})r_{O2}}\\approx\\frac{1}{g_{m2}+g_{mb2}}\\left(1+\\frac{r_{O1}}{r_{O2}}\\right)}$$\n\n- **Not simply $1/g_m$.** $R_{in}\\approx 1/g_m$ only when the load is much smaller than $r_{O2}$.\n- **Typical active load** ($r_{O1}\\approx r_{O2}$): $R_{in}\\approx 2/(g_{m2}+g_{mb2})$.\n- **Ideal current source:** $R_{in}\\to\\infty$. The current of M2 cannot change, so $i_{in}=0$ for any $v_{in}$.\n- **Cascode load** ($R_L\\sim g_mr_O^2$): $R_{in}$ rises to roughly $r_O$. This matters in cascode and folded-cascode designs.\n\n---\n\n## 4. Output resistance, source resistance, and the current-buffer view\n\n**Output resistance.**\n- With an ideal voltage source at the input: $R_{out}=r_{O1}\\parallel r_{O2}$.\n- With a source resistance $R_S$: $R_{out}=r_{O1}\\parallel\\{r_{O2}+[1+(g_{m2}+g_{mb2})r_{O2}]R_S\\}$.\n\n**Gain with source resistance:**\n$$\\frac{v_{out}}{v_{in}}=\\frac{[1+(g_{m2}+g_{mb2})r_{O2}]\\,r_{O1}}{r_{O1}+r_{O2}+[1+(g_{m2}+g_{mb2})r_{O2}]R_S}=\\frac{R_{in}}{R_{in}+R_S}A_v$$\n\n**Current-buffer view.** If the stage is driven by a current ($R_S\\to\\infty$), then $v_{out}=i_{in}r_{O1}$.\n- The current gain is unity.\n- The transimpedance equals the load resistance.\n\n---\n\n## 5. Frequency response\n\n**Node capacitances.**\n- Input: $C_{in}=C_{GS2}+C_{SB2}$, plus any source capacitance.\n- Output: $C_{out}=C_{GD2}+C_{DB2}+C_{GD1}+C_{DB1}+C_L$.\n\n**No Miller effect.** The gate is at AC ground, so no capacitor bridges the input and output. The transfer function has no zeros.\n\n**Ideal voltage drive.** There is a single pole:\n- $\\omega_p=1/[(r_{O1}\\parallel r_{O2})C_{out}]$\n- Gain-bandwidth product: $\\text{GBW}\\approx(g_{m2}+g_{mb2})/C_{out}$.\n\n**With $R_S$.** There are two poles:\n$$\\omega_{out}\\approx\\frac{1}{R_{out}C_{out}},\\qquad \\omega_{in}\\approx\\frac{g_{m2}+g_{mb2}+1/R_S}{C_{in}}$$\n\n**Frequency-dependent input impedance.**\n$$Z_{in}(s)=\\frac{r_{O2}+r_{O1}\\parallel(1/sC_{out})}{1+(g_{m2}+g_{mb2})r_{O2}}$$\n- This is approximately $1/g_m$ in series with $\\big[r_{O1}/(g_mr_{O2})\\big]\\parallel\\big[(g_mr_{O2})C_{out}\\big]$.\n- The load capacitance is reflected to the input, multiplied by about $g_mr_O$.\n- As a result, $Z_{in}$ falls from about $2/g_m$ at DC to about $1/g_m$ at high frequency.\n\n---\n\n## 6. Noise (thermal)\n\n- **Input-referred voltage noise:**\n$$\\overline{v_n^2}\\approx 4kT\\gamma\\,\\frac{g_{m1}+g_{m2}}{(g_{m2}+g_{mb2})^2}$$\nThis is similar to a CS stage.\n- **Input-referred current noise:**\n$$\\overline{i_n^2}=4kT\\gamma\\, g_{m1}$$\nM2 contributes nothing here, because with the input open its noise current circulates inside the device. When the stage is driven from a high impedance (as in a TIA or a cascode), the **load noise dominates**.\n\n---\n\n## 7. Large-signal behavior\n\nAs $V_{in}$ rises:\n1. **Below $V_{IN}$:** M2 is in triode, and $V_{out}$ follows $V_{in}$ with a small offset.\n2. **Near $V_{IN}$:** both devices are saturated, and the slope equals $A_v$.\n3. **Above that:** M1 enters triode, and $V_{out}\\to V_{DD}$.\n4. **For $V_{in}>V_{b1}-V_{TH2}$:** M2 turns off.\n\nThe useful input window is only about $(V_{DD}-|V_{ov1}|-V_{ov2}-V_{IN})/A_v$ wide.\n\n---\n\n## 8. Numerical example\n\nTake $g_{m2}+g_{mb2}=5$ mS and $r_{O1}=r_{O2}=20$ kΩ:\n\n| Case | $A_v$ | $R_{in}$ | $R_{out}$ |\n|---|---|---|---|\n| PMOS current-source load | $101\\times 20\\text{k}/40\\text{k}\\approx 50.5$ (34 dB) | $40\\text{k}/101\\approx 396\\ \\Omega$ (≈ 2/g_m, not 200 Ω) | 10 kΩ |\n| Ideal current source | 101 | ∞ | — |\n| Cascode load (≈ 2 MΩ) | — | ≈ 20 kΩ | — |\n\n---\n\n## Summary\n\n| Quantity | Result |\n|---|---|\n| Gain | $\\approx (g_{m2}+g_{mb2})(r_{O1}\\parallel r_{O2})$, non-inverting |\n| $R_{in}$ | $(r_{O1}+r_{O2})/[1+(g_{m2}+g_{mb2})r_{O2}]$, about 2/g_m, set by the load |\n| $R_{out}$ | $r_{O1}\\parallel r_{O2}$ (boosted by $R_S$) |\n| Bandwidth | output pole $1/(R_{out}C_{out})$; no Miller multiplication |\n| Swing | $V_{IN}+V_{ov2}$ to $V_{DD}-\\lvert V_{ov1}\\rvert$ |\n| Practical issue | output DC level must be set by feedback |",
        "format": "markdown",
        "sha256": "32c3f35b3a3a09c703ea828eb15bb7a2cd2fe66e36e71a25ae0bce74c68f2474"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage with a PMOS current-source load, places the input at M2’s source, identifies both bias voltages, and gives the non-inverting gain and low input resistance. The gain expression is equivalent to the required result; extra secondary analysis does not alter the essential answer.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1338,
        "output_tokens": 34746,
        "total_tokens": 36084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31084,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1338,
        "output_tokens": 34746,
        "total_tokens": 36084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31084,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Gate Amplifier with a PMOS Current-Source Load: Analysis\n\n## 1. What the circuit is\n\n- **M2 (NMOS)** has its gate tied to the DC bias V_b1, so the gate is at AC ground. The signal drives its **source**, and the output is taken at its **drain**. This makes it a **common-gate (CG) stage**.\n- **M1 (PMOS)** has a fixed V_SG = V_DD − V_b2, so it acts as a **current-source load**:\n  $$I_D \\approx \\tfrac12\\mu_pC_{ox}(W/L)_1\\,(V_{DD}-V_{b2}-|V_{THP}|)^2$$\n- The stage is non-inverting. It is essentially a **current buffer**: any small-signal current entering M2's source leaves its drain and flows into the load.\n\n## 2. DC operating point and large-signal behavior\n\nM1 fixes the current, so the input DC level must satisfy\n\n$$V_{in,Q}=V_{b1}-V_{TH2}-\\sqrt{\\frac{2I_D}{\\mu_nC_{ox}(W/L)_2}}$$\n\nV_TH2 includes body effect, because V_SB2 = V_in when the body is grounded. The V_in source must also provide a DC path that sinks I_D.\n\nBoth devices are saturated when:\n\n$$V_{b1}-V_{TH2}\\;\\le\\;V_{out}\\;\\le\\;V_{b2}+|V_{THP}|$$\n\n| V_in | M2 | M1 | V_out |\n|---|---|---|---|\n| ≥ V_b1 − V_TH2 | off | triode (I = 0) | V_DD |\n| slightly below | sat. (current < I_D) | triode | ≈ V_DD |\n| ≈ V_in,Q | sat. | sat. | steep rise, slope = A_v |\n| < V_in,Q | triode | sat. | ≈ V_in + I_D·R_on2 (tracks V_in) |\n\n**Practical consequence:** the output is a high-impedance node where two current sources \"fight.\"\n- A small current mismatch moves V_out by ΔI·(r_o1‖r_o2).\n- The high-gain window in V_in is only about (output swing)/A_v wide.\n- So the output DC level must be set by feedback, such as a bias loop or CMFB in a differential version.\n\n## 3. Small-signal voltage gain\n\nModel M1 as r_o1. For M2, v_gs2 = v_bs2 = −v_in. KCL at the output gives:\n\n$$\\frac{v_{out}}{r_{o1}}+\\frac{v_{out}-v_{in}}{r_{o2}}-(g_{m2}+g_{mb2})v_{in}=0$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\big[1+(g_{m2}+g_{mb2})r_{o2}\\big]\\frac{r_{o1}}{r_{o1}+r_{o2}}\\approx(g_{m2}+g_{mb2})(r_{o1}\\|r_{o2})}$$\n\n- The gain is positive.\n- Its magnitude is similar to a CS stage with the same load.\n- Body effect *helps* here, unlike in a source follower.\n\n## 4. Input impedance (the key insight)\n\nThe same small-signal current flows through r_o1, M2, and the input source, so i_in = v_out/r_o1 and R_in = r_o1/A_v:\n\n$$\\boxed{R_{in}=\\frac{r_{o1}+r_{o2}}{1+(g_{m2}+g_{mb2})r_{o2}}=\\frac{1}{g_{m2}+g_{mb2}+1/r_{o2}}+\\frac{r_{o1}}{1+(g_{m2}+g_{mb2})r_{o2}}}$$\n\n- This is **not** 1/g_m. The load impedance appears at the input, divided by the intrinsic gain.\n- If r_o1 ≈ r_o2, then R_in ≈ 2/g_m.\n- With an ideal or cascoded current-source load (r_o1 → ∞), **R_in → ∞**. M1 forbids any change in current, so no signal current can enter the source.\n- The low input impedance usually attributed to CG stages needs a load much smaller than r_o2.\n- The stage is also **not unilateral**: r_o2 couples the output back to the input.\n- The same result gives the impedance at the internal node of a cascode loaded by a current source.\n\n## 5. Output impedance\n\nWith source resistance R_S:\n\n$$R_{out}=r_{o1}\\,\\|\\,\\big[r_{o2}+(1+(g_{m2}+g_{mb2})r_{o2})R_S\\big]$$\n\nThis equals r_o1‖r_o2 for R_S = 0 and approaches r_o1 for large R_S.\n\n## 6. Gain from a source with resistance R_S\n\n$$\\frac{v_{out}}{v_s}=\\frac{r_{o1}}{R_S+R_{in}}=\\frac{[1+(g_{m2}+g_{mb2})r_{o2}]\\,r_{o1}}{r_{o1}+r_{o2}+[1+(g_{m2}+g_{mb2})r_{o2}]R_S}$$\n\nThe current gain is unity, so the input current v_s/(R_S + R_in) all flows into r_o1. Because R_in is fairly large, even a moderate R_S cuts the gain.\n\n**Example:** take g_m2 = 2 mS, r_o1 = r_o2 = 20 kΩ, and ignore g_mb.\n- A_v = 20.5.\n- R_in ≈ 976 Ω, versus 1/g_m = 500 Ω.\n- R_out = 10 kΩ.\n- With R_S = 1 kΩ, the overall gain drops to about 10.\n\n## 7. Frequency response\n\nThe node capacitances are:\n- Input node: C_X = C_GS2 + C_SB2.\n- Output node: C_Y = C_GD2 + C_DB2 + C_GD1 + C_DB1 + C_L.\n\nBecause the gate is at AC ground, there is **no Miller multiplication** of C_GD2. Using g_S = 1/R_S, g_{1,2} = 1/r_{o1,2}, and G = g_m2 + g_mb2 + g_2:\n\n$$\\frac{v_{out}}{v_s}(s)=\\frac{G\\,g_S}{(g_S+G+sC_X)(g_1+g_2+sC_Y)-g_2G}$$\n\nThis has two poles and no zero. Typically:\n- Output pole (dominant, since R_out is large): ω_out ≈ 1/(R_out·C_Y).\n- Input pole: ω_in ≈ (g_m2 + g_mb2 + 1/R_S)/C_X.\n\nThe input impedance depends on frequency: Z_in = (Z_L + r_o2)/(1 + (g_m2+g_mb2)r_o2), with Z_L = r_o1 ‖ 1/(sC_Y). Above the output pole, Z_in falls toward 1/(g_m2+g_mb2).\n\n## 8. Noise (brief)\n\n$$\\overline{V_{n,in}^2}\\approx\\frac{4kT\\gamma(g_{m2}+g_{m1})}{(g_{m2}+g_{mb2})^2},\\qquad \\overline{I_{n,in}^2}\\approx4kT\\gamma\\, g_{m1}$$\n\nThe load's noise current appears unattenuated as input-referred current noise, because the current gain is unity. This is a basic drawback of a CG stage driven from a high-impedance source.\n\n## Summary\n\n| Parameter | Result |\n|---|---|\n| Gain | ≈ (g_m2 + g_mb2)(r_o1‖r_o2), non-inverting |\n| R_in | (r_o1 + r_o2)/[1 + (g_m2+g_mb2)r_o2] ≈ 2/g_m2 when r_o1 ≈ r_o2 (∞ for an ideal load) |\n| R_out | r_o1‖r_o2 (R_S = 0) |\n| Output swing | V_b1 − V_TH2 to V_b2 + \\|V_THP\\| |\n| Strengths | wide bandwidth (no Miller effect), current-buffer action |\n| Weaknesses | R_in raised by the high-impedance load, output DC level needs feedback, load noise passes straight to the input |",
        "format": "markdown",
        "sha256": "24fa4372a4358183f477468236b9141d6e3158e79011b790d9a921c8fb04379f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage with a PMOS current-source load, places the input at M2’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. Its body-effect-inclusive gain expression is an acceptable refinement.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1338,
        "output_tokens": 28138,
        "total_tokens": 29476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25280,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1338,
        "output_tokens": 28138,
        "total_tokens": 29476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25280,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Answer: **2 poles**\n\n## Reasoning\n\n**Ac grounds.** The source of M2 goes to V_DD, its gate goes to a bias voltage, and the top of C_DB2 goes to V_DD. All of these are ac grounds. For small signals, M2 is simply its output resistance r_o2.\n\n**Merge the parallel capacitors.** C_GD2 (output to M2's gate), C_DB2 (output to V_DD) and C_DB (output to ground) all connect the output to ac ground. They are in parallel and act as one capacitor:\n\n$$C_L = C_{DB} + C_{DB2} + C_{GD2}$$\n\n**What remains** is a basic common-source stage with three capacitors:\n- C_GS, from the gate of M1 to ground\n- C_GD, from the gate of M1 to the output\n- C_L, from the output to ground\n\n**These three capacitors form a loop** (gate → output → ground → gate). Their voltages are therefore not independent: V_GD = V_GS − V_out. Only two of them are independent state variables.\n\nEquivalently, the capacitor network has 3 nodes (gate, output, ground) and 5 capacitors. That gives 5 − 3 + 1 = 3 independent capacitor loops, so the order is 5 − 3 = **2**.\n\n## Transfer function\n\nWith R_L = r_o1 ‖ r_o2:\n\n$$\\frac{V_{out}}{V_{in}} = \\frac{(C_{GD}s - g_{m1})R_L}{R_S R_L\\,\\xi\\, s^2 + \\left[R_S(1+g_{m1}R_L)C_{GD} + R_S C_{GS} + R_L(C_{GD}+C_L)\\right]s + 1}$$\n\nwhere $\\xi = C_{GS}C_{GD} + C_{GS}C_L + C_{GD}C_L$.\n\nThe denominator is second-order, so the circuit has **two poles**. It also has one right-half-plane zero at g_m1/C_GD.",
        "format": "markdown",
        "sha256": "bcc62cdd4053539686a56b59ba0b7bbf18ae760e5f4fdb95a343abef2664e302"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent dynamic nodes—the gate of M1 and the output—and assigns the capacitors to the appropriate nodes. The resulting second-order denominator is consistent with the circuit.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1908,
        "output_tokens": 3411,
        "total_tokens": 5319,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2741,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1908,
        "output_tokens": 3411,
        "total_tokens": 5319,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2741,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Answer: two poles.**\n\nThe circuit has five capacitors, but only two of them can hold independent voltages.\n\n1. **Merge the parallel capacitors.** In the small-signal model, VDD and the bias at the gate of M₂ are both AC ground. So $C_{GD2}$, $C_{DB2}$ and $C_{DB}$ all sit between $V_{out}$ and ground. They combine into one capacitor:\n   $$C_L = C_{DB}+C_{GD2}+C_{DB2}$$\n\n2. **Find the capacitor loop.** The remaining capacitors $C_{GS}$, $C_{GD}$ and $C_L$ form a loop: ground → $C_{GS}$ → gate → $C_{GD}$ → output → $C_L$ → ground. By KVL, $V_{C_{GD}} = V_{C_{GS}} - V_{C_L}$. So only two capacitor voltages are independent state variables.\n\nThis leaves 5 capacitors − 3 constraints = 2 independent capacitors, so the circuit is second order.\n\n**Check by nodal analysis.** Let $R_{out}=r_{O1}\\|r_{O2}$. Writing the equations at the gate of M₁ and at the output gives:\n\n$$\n\\frac{V_{out}}{V_{in}}=\\frac{(sC_{GD}-g_m)R_{out}}{R_SR_{out}\\,\\xi\\, s^2+\\big[R_S(1+g_mR_{out})C_{GD}+R_SC_{GS}+R_{out}(C_{GD}+C_L)\\big]s+1}\n$$\n\nwhere $\\xi = C_{GS}C_{GD}+C_{GS}C_L+C_{GD}C_L$.\n\nThe denominator is second order, which confirms **two poles**. The numerator also gives one right-half-plane zero at $g_m/C_{GD}$.",
        "format": "markdown",
        "sha256": "b3d943508188747a1a6a0ea7c9047e883af13c5f8f6f244ed5a4d3845d6933fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent capacitive node voltages—the M1 gate and output—and assigns the capacitors to the right nodes. The second-order denominator confirms two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1908,
        "output_tokens": 4323,
        "total_tokens": 6231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3688,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1908,
        "output_tokens": 4323,
        "total_tokens": 6231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3688,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Two poles\n\nThe circuit has five capacitors, but only two are independent.\n\n**1. Lump the output capacitances.** The gate and source of M2 and the top plate of C_DB2 all go to AC ground. So C_GD2, C_DB2, and C_DB all connect from V_out to AC ground. They are in parallel and act as one capacitor:\n\n$$C_L = C_{DB} + C_{DB2} + C_{GD2}$$\n\n**2. Look for a capacitor loop.** C_GS (gate to ground), C_GD (gate to output), and C_L (output to ground) form a loop made only of capacitors. By KVL their voltages satisfy V_CGS = V_CGD + V_CL, so only two of the three voltages are independent.\n\nEquivalently, only two nodes carry independent voltages: the gate of M1 (X) and V_out. That makes the circuit second order.\n\n**3. Check with the transfer function.** Let R_L = r_o1 ∥ r_o2 and g_m be the transconductance of M1. Writing KCL at X and at V_out gives\n\n$$\\frac{V_{out}}{V_{in}}=\\frac{(sC_{GD}-g_m)R_L}{R_SR_L\\,\\xi\\, s^2+\\big[R_S(1+g_mR_L)C_{GD}+R_SC_{GS}+R_L(C_{GD}+C_L)\\big]s+1}$$\n\nwhere ξ = C_GS·C_GD + C_GS·C_L + C_GD·C_L.\n\nThe denominator is second order, so there are **two poles**. There is also one right-half-plane zero at g_m/C_GD.",
        "format": "markdown",
        "sha256": "032ce29900dae3b6544be3a07031221b10454c97947aa5a41707aa8b5b8be327"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent voltage nodes—the M1 gate and output—and assigns the capacitors to those nodes. The second-order denominator confirms two poles; the additional zero discussion is also consistent.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1908,
        "output_tokens": 5245,
        "total_tokens": 7153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4698,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1908,
        "output_tokens": 5245,
        "total_tokens": 7153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4698,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Stacked-NMOS Common-Source Stage\n\n**Assumptions:** M₁ and M₂ are identical (same W/L and V_TH), square-law, and λ = γ = 0 unless stated. Let β = μₙC_ox(W/L), V_ov = V_in − V_TH, and let X be the node between M₁ and M₂.\n\n---\n\n## 1. M₁ is always in triode while current flows\n\nFor M₂ to conduct:\n\n$$V_{GS2}=V_{in}-V_X>V_{TH}\\;\\Rightarrow\\;V_X<V_{in}-V_{TH}=V_{GS1}-V_{TH}$$\n\nSince V_DS1 = V_X, this means V_DS1 < V_GS1 − V_TH, so **M₁ is in the triode region whenever current flows**. Body effect raises V_TH2, which makes the condition even stronger.\n\nOnly M₂ can saturate. M₁ acts as a gate-controlled degeneration resistor under M₂.\n\n## 2. The stack behaves as one transistor of size W/(2L)\n\nWith M₂ saturated, equate the two drain currents:\n\n$$\\beta\\Big[V_{ov}V_X-\\tfrac12V_X^2\\Big]=\\tfrac12\\beta\\,(V_{ov}-V_X)^2\n\\;\\Rightarrow\\;\nV_X=\\Big(1-\\tfrac{1}{\\sqrt2}\\Big)V_{ov}\\approx0.29\\,V_{ov}$$\n\nSubstituting back gives\n\n$$I_D=\\tfrac14\\beta V_{ov}^2=\\tfrac12\\mu_nC_{ox}\\frac{W}{2L}(V_{in}-V_{TH})^2$$\n\n**General proof.** For each device, I_D·(L/W) = μₙC_ox∫(V_G − V − V_TH)dV, taken along its channel. The integrand is zero beyond pinch-off.\n\n- Adding the M₁ integral (0 → V_X) and the M₂ integral (V_X → V_out) eliminates V_X.\n- The result is exactly the I–V law of a single W/(2L) device, valid in both saturation and triode.\n- For unequal devices, (L/W)_eq = (L/W)₁ + (L/W)₂.\n\n## 3. Large-signal characteristic (V_in swept from 0 to V_DD)\n\n| V_in range | M₁ | M₂ | V_out |\n|---|---|---|---|\n| V_in < V_TH | off | off | V_DD |\n| V_TH < V_in < V_in1 | triode | saturation | V_DD − ¼βR_D(V_in − V_TH)² |\n| V_in > V_in1 | triode | triode | V_DD − ½βR_D[(V_in − V_TH)V_out − V_out²/2] |\n\n**Transition point.** M₂ enters triode when V_out = V_in − V_TH (V_X cancels out of this condition):\n\n$$V_{in1}=V_{TH}+\\frac{2}{\\beta R_D}\\left[\\sqrt{1+\\beta R_DV_{DD}}-1\\right]$$\n\n**Large V_in.** The stack acts as a resistor 2R_on, where R_on = 1/[β(V_in − V_TH)]:\n\n$$V_{out}\\approx V_{DD}\\,\\frac{2R_{on}}{2R_{on}+R_D}$$\n\n## 4. Small-signal gain (M₂ saturated)\n\n**From the equivalent device:**\n\n$$g_{m,eq}=\\mu_nC_{ox}\\frac{W}{2L}(V_{in}-V_{TH})=\\sqrt{\\mu_nC_{ox}(W/L)\\,I_D}$$\n\n$$A_v=-g_{m,eq}R_D=-\\tfrac12\\,\\mu_nC_{ox}\\frac{W}{L}(V_{in}-V_{TH})\\,R_D$$\n\n**Direct check with the small-signal model.** Model M₁ (triode) by g_m1 = βV_X and R_on1 = 1/[β(V_ov − V_X)]. Model M₂ by g_m2 = β(V_ov − V_X). KCL at X and at the output gives\n\n$$A_v=-g_{m2}R_D\\,\\frac{1+g_{m1}R_{on1}}{1+g_{m2}R_{on1}}$$\n\nHere g_m2R_on1 = 1 and g_m1R_on1 = √2 − 1. Therefore A_v = −g_m2R_D/√2 = −½βV_ovR_D, which matches the equivalent-device result.\n\nInterpretation of this result:\n\n- Degeneration by R_on1 alone would halve M₂'s transconductance.\n- Because M₁'s gate is also driven, it injects g_m1·v_in, which raises the effective G_m by a factor of √2.\n\n**Including λ and γ:**\n\n$$A_v=-R_D\\frac{g_{m2}r_{o2}+g_{m1}R_{on1}\\,[1+(g_{m2}+g_{mb2})r_{o2}]}{R_D+r_{o2}+R_{on1}\\,[1+(g_{m2}+g_{mb2})r_{o2}]}$$\n\nThe stack's output resistance is\n\n$$R_{out}=r_{o2}+R_{on1}[1+(g_{m2}+g_{mb2})r_{o2}]\\approx\\Big(2+\\tfrac{g_{mb2}}{g_{m2}}\\Big)r_{o2}$$\n\nThis is about twice the r_o of a single device, as expected for a channel of length 2L.\n\n**Gain profile versus V_in:**\n\n- |A_v| is zero below V_TH.\n- It grows linearly with V_in while M₂ is saturated.\n- It peaks at V_in1, where |A_v|_max = √(1 + βR_D·V_DD) − 1.\n- It falls once M₂ enters triode.\n\n## 5. Summary\n\n- The two gate-tied series transistors form a single \"long\" transistor of size W/(2L).\n- M₁ never saturates. The circuit is an ordinary CS stage with β_eq = β/2.\n- Compared with a single W/L device:\n  - At the same V_in, the current and the gain are halved.\n  - At the same I_D, g_m drops by a factor of √2 but r_o roughly doubles, so the intrinsic gain g_m·r_o improves by √2.\n- Body effect (V_SB2 = V_X > 0) makes the equivalence approximate and slightly reduces the current.",
        "format": "markdown",
        "sha256": "fd3b6630c390e82e64d816ba6cd9593cf02d52f585359d36ec3c6a81745b9b37"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS stack, with the lower device in triode, and concludes that it behaves approximately like a transistor with effective channel length L₁ + L₂. The additional analysis is consistent with its stated ideal assumptions and does not undermine the central result.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 20885,
        "total_tokens": 22416,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18684,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 20885,
        "total_tokens": 22416,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18684,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Stacked-NMOS Common-Source Stage\n\n**Assumptions:** M₁ and M₂ are identical (W/L) square-law devices. Unless noted, λ = γ = 0, so V_TH1 = V_TH2 = V_TH. Node X is the drain of M₁ and the source of M₂. Let k = μₙC_ox(W/L).\n\n---\n\n## 1. Operating regions\n\nBoth gates are driven by V_in, so\n\n$$V_{DS1}=V_X=V_{in}-V_{GS2}$$\n\nIf any current flows, M₂ must be on, so V_GS2 > V_TH2. Therefore\n\n$$V_{DS1}<V_{in}-V_{TH2}\\le V_{GS1}-V_{TH1}$$\n\n- **M₁ is always in the triode region.** It never saturates. The body effect on M₂ (V_TH2 > V_TH1) only reinforces this.\n- **M₂** is saturated when V_DS2 ≥ V_GS2 − V_TH. This condition reduces to **V_out ≥ V_in − V_TH**.\n\nSo, although the circuit looks like one, it is **not a cascode**.\n\n---\n\n## 2. The stack acts as one transistor of length 2L\n\n**With M₂ saturated**, the two devices must carry the same current:\n\n$$k\\Big[(V_{in}-V_{TH})V_X-\\tfrac{V_X^2}{2}\\Big]=\\tfrac{k}{2}(V_{in}-V_{TH}-V_X)^2$$\n\nSolving gives the node-X voltage and the current:\n\n$$V_X=\\Big(1-\\tfrac{1}{\\sqrt2}\\Big)(V_{in}-V_{TH})\\approx0.29\\,(V_{in}-V_{TH})$$\n\n$$I_D=\\tfrac14 k(V_{in}-V_{TH})^2=\\tfrac12\\mu_nC_{ox}\\frac{W}{2L}(V_{in}-V_{TH})^2$$\n\n**General proof (all regions).** Write the square law as\n\n$$I_D=\\mu_nC_{ox}\\frac{W}{L}\\big[F(V_{GS}-V_{TH})-F(V_{GD}-V_{TH})\\big],$$\n\nwhere F(u) = u²/2 for u > 0 and F(u) = 0 otherwise.\n\nWrite this equation for M₁ and for M₂, then add them. The F(V_in − V_X − V_TH) terms cancel, leaving\n\n$$I_D=\\mu_nC_{ox}\\frac{W}{L_1+L_2}\\big[F(V_{in}-V_{TH})-F(V_{in}-V_{out}-V_{TH})\\big]$$\n\nSo M₁ + M₂ is equivalent to a single NMOS of size **W/(2L)**.\n\n---\n\n## 3. Large-signal characteristic (V_out vs V_in)\n\nLet β = μₙC_ox·W/(2L).\n\n| Range of V_in | Device states | V_out |\n|---|---|---|\n| V_in < V_TH | Both off | V_out = V_DD |\n| V_TH < V_in < V_in1 | M₁ triode, M₂ saturated | V_out = V_DD − ½βR_D(V_in − V_TH)² |\n| V_in > V_in1 | Both triode | V_out = V_DD − βR_D[(V_in − V_TH)V_out − V_out²/2] |\n\nThe breakpoint V_in1 is where V_out = V_in − V_TH:\n\n$$V_{in1}=V_{TH}+\\frac{\\sqrt{1+2\\beta R_DV_{DD}}-1}{\\beta R_D}$$\n\nFor large V_in, the stack behaves as two triode resistors in series, R_on1 + R_on2 = 1/[β(V_in − V_TH)]. Then\n\n$$V_{out}\\approx \\frac{V_{DD}}{1+\\beta R_D(V_{in}-V_{TH})}$$\n\n**Shape of the curve:** V_out is flat at V_DD, then falls parabolically, then tails off slowly toward (but never reaching) zero. The gain magnitude is largest at V_in1.\n\n---\n\n## 4. Small-signal gain (M₂ saturated)\n\nThe small-signal parameters are:\n\n- M₁ (triode): g_m1 = kV_X and g_ds1 = 1/R_on1 = k(V_in − V_TH − V_X).\n- M₂ (saturation): g_m2 = k(V_in − V_TH − V_X). Note that **g_m2 = g_ds1**.\n\nKCL at node X:\n\n$$g_{m1}v_{in}+g_{ds1}v_x=g_{m2}(v_{in}-v_x)$$\n\nThis gives v_x ≈ 0.29 v_in and\n\n$$G_m=\\frac{g_{m2}(g_{m1}+g_{ds1})}{g_{m2}+g_{ds1}}=\\frac{g_{m1}+g_{ds1}}{2}=\\mu_nC_{ox}\\frac{W}{2L}(V_{in}-V_{TH})$$\n\nThis is exactly g_m of the equivalent W/2L device. The voltage gain is\n\n$$A_v=-\\mu_nC_{ox}\\frac{W}{2L}(V_{in}-V_{TH})R_D=-\\sqrt{2\\mu_nC_{ox}\\tfrac{W}{2L}I_D}\\;R_D=-\\frac{2I_DR_D}{V_{in}-V_{TH}}$$\n\n**Role of M₁.** M₁ is not just a degeneration resistor. If it were only R_on1 = 1/g_m2, G_m would be g_m2/2 ≈ 0.35k(V_in − V_TH). M₁'s own transconductance raises this to 0.5k(V_in − V_TH).\n\n**With channel-length modulation (λ ≠ 0):**\n\n$$R_{out}=r_{o2}+[1+(g_{m2}+g_{mb2})r_{o2}]R_{on1}\\approx 2r_{o2}\\qquad (g_{m2}R_{on1}=1)$$\n\n$$A_v\\approx-G_m\\,(R_D\\parallel R_{out})$$\n\nThe output resistance is only about 2r_o, not the g_m·r_o² of a true cascode. This matches a device of doubled length, since λ ∝ 1/L.\n\n---\n\n## 5. Remarks\n\n- **Versus a single W/L transistor:**\n  - At the same V_in: half the current, half the g_m, so half the gain.\n  - At the same I_D: g_m is lower by √2, but r_o doubles, so the intrinsic gain g_m·r_o is higher by √2.\n  - At the same overdrive and same drop across R_D: identical gain, −2V_RD/V_ov.\n- **Practical use:** this series connection is used to build long-channel devices from unit transistors, which helps layout and matching.\n- **Body effect:** V_X > 0 raises V_TH2. This slightly increases the effective threshold, lowers V_X, and pushes M₁ deeper into triode. The conclusions above remain qualitatively valid.",
        "format": "markdown",
        "sha256": "1662c3d1940918deeff3828122d6de7b2fff341956465a7c48223b79488a4a47"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS structure, with M₁ in triode and M₂ saturated, and explains that identical devices approximate one NMOS with twice the channel length. The small-signal and output-resistance discussion is consistent with the golden solution under the stated idealized assumptions.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 20665,
        "total_tokens": 22196,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18254,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 20665,
        "total_tokens": 22196,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18254,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of a CS Stage Whose Input Device Is Two Stacked NMOS Transistors (Gates Tied)\n\nThe circuit is a common‑source stage with resistive load $R_D$. Its input device is M1 and M2 in series with both gates at $V_{in}$. Call the node between them X.\n\nNotation: $\\beta_i=\\mu_nC_{ox}(W/L)_i$ and $V_{ov}=V_{in}-V_{TH}$. The square law is assumed, with λ = γ = 0 unless stated otherwise.\n\n---\n\n## 1. Regions of operation\n\n$V_{DS1}=V_X=V_{in}-V_{GS2}$. For M2 to conduct, $V_{GS2}>V_{TH2}$. Also $V_{TH2}\\ge V_{TH1}$, because body effect raises $V_{TH2}$ when $V_X>0$. Therefore:\n\n$$V_{DS1}=V_{in}-V_{GS2}<V_{in}-V_{TH1}=V_{GS1}-V_{TH1}$$\n\n- **M1 is always in triode**, whatever the device sizes.\n- **M2 can saturate.** It stays saturated while $V_{out}-V_X\\ge V_{in}-V_X-V_{TH}$, i.e. $V_{out}\\ge V_{in}-V_{TH}$.\n\nPhysically, the two channels sit under the same gate and form one continuous channel. Pinch‑off can only happen at its drain end, which lies in M2.\n\n## 2. Large signal: the stack acts as one long transistor\n\nThe two device equations are:\n\n- M1 (triode): $I_D=\\beta_1\\left[V_{ov}V_X-\\tfrac12V_X^2\\right]$\n- M2 (saturation): $I_D=\\tfrac12\\beta_2(V_{ov}-V_X)^2$\n\nDividing each by its β and adding makes $V_X$ cancel:\n\n$$I_D\\Big(\\tfrac1{\\beta_1}+\\tfrac1{\\beta_2}\\Big)=\\tfrac12V_{ov}^2\\;\\Rightarrow\\; I_D=\\tfrac12\\beta_{eq}(V_{in}-V_{TH})^2,\\qquad \\beta_{eq}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}$$\n\n- The stack is a single device with $(W/L)_{eq}=[(L/W)_1+(L/W)_2]^{-1}$.\n- With equal widths, this is a device of length $L_1+L_2$. For identical devices it is $W/2L$.\n- The same result holds when M2 is also in triode.\n- This is why stacking is used in layout to make long‑L transistors.\n\nThe intermediate node sits at:\n\n$$V_X=V_{ov}\\left(1-\\sqrt{\\tfrac{\\beta_1}{\\beta_1+\\beta_2}}\\right)\\approx0.29\\,V_{ov}\\ \\text{(identical devices)}$$\n\n## 3. Transfer characteristic\n\n| $V_{in}$ | M1 | M2 | $V_{out}$ |\n|---|---|---|---|\n| $<V_{TH}$ | off | off | $V_{DD}$ |\n| $V_{TH}$ to $V_{in1}$ | triode | sat | $V_{DD}-\\tfrac12\\beta_{eq}R_D(V_{in}-V_{TH})^2$ |\n| $>V_{in1}$ | triode | triode | $V_{DD}-R_D\\beta_{eq}[V_{ov}V_{out}-V_{out}^2/2]$, which tends to $V_{DD}\\frac{R_{on,eq}}{R_{on,eq}+R_D}$ |\n\nM2 enters triode when $V_{out}=V_{in}-V_{TH}$:\n\n$$V_{in1}=V_{TH}+\\frac{\\sqrt{1+2\\beta_{eq}R_DV_{DD}}-1}{\\beta_{eq}R_D}$$\n\nOnly one overdrive of headroom is used, unlike a true cascode which needs two. This is because M1 sits in triode.\n\n## 4. Small‑signal gain (M2 saturated)\n\nM1 is in triode, so its model needs both a transconductance and a channel resistance:\n\n$$g_{m1}=\\beta_1V_X,\\qquad R_{on1}^{-1}=\\beta_1(V_{ov}-V_X),\\qquad g_{m2}=\\beta_2(V_{ov}-V_X)$$\n\nThe same current flows through both devices, so KCL at X gives:\n\n$$g_{m1}v_{in}+\\frac{v_X}{R_{on1}}=g_{m2}(v_{in}-v_X)\\;\\Rightarrow\\; v_X=\\frac{g_{m2}-g_{m1}}{g_{m2}+R_{on1}^{-1}}\\,v_{in}$$\n\nWith $v_{out}=-g_{m2}(v_{in}-v_X)R_D$:\n\n$$\\boxed{A_v=-\\,\\frac{g_{m2}\\,(1+g_{m1}R_{on1})}{1+g_{m2}R_{on1}}\\,R_D}$$\n\nThe result can be read by superposition:\n\n- **Signal on M2's gate only:** M2 is a CS stage degenerated by $R_{on1}$. This contributes $g_{m2}/(1+g_{m2}R_{on1})$.\n- **Signal on M1's gate only:** M1 injects $g_{m1}v_{in}$ into X. M2 acts as a cascode and passes the fraction $g_{m2}R_{on1}/(1+g_{m2}R_{on1})$ of that current to the output.\n\nNow substitute the bias values, using $g_{m1}+R_{on1}^{-1}=\\beta_1V_{ov}$ and $g_{m2}+R_{on1}^{-1}=(\\beta_1+\\beta_2)(V_{ov}-V_X)$:\n\n$$A_v=-\\beta_{eq}(V_{in}-V_{TH})R_D=-\\sqrt{2\\beta_{eq}I_D}\\;R_D$$\n\nThis is exactly the gain of a CS stage built with the equivalent device.\n\n- **Identical devices:** $A_v=-\\tfrac12\\mu_nC_{ox}\\frac{W}{L}(V_{in}-V_{TH})R_D$. That is half the gain of a single $W/L$ device at the same $V_{in}$, or $1/\\sqrt2$ of it at the same $I_D$.\n- **Gain vs. $V_{in}$:** $|A_v|$ rises linearly with $V_{in}$ and peaks at $V_{in1}$, where $|A_v|_{max}=\\sqrt{1+2\\beta_{eq}R_DV_{DD}}-1$. It then falls as M2 enters triode.\n- **Common mistake:** treating M1 as a plain resistor underestimates the gain. M1 is not in deep triode ($V_{DS1}\\approx0.29V_{ov}$), and its gate also carries signal, so $g_{m1}$ must be kept.\n\n## 5. Second‑order effects\n\n**Body effect in M2:**\n$$A_v=-R_D\\,\\frac{g_{m2}+(g_{m2}+g_{mb2})g_{m1}R_{on1}}{1+(g_{m2}+g_{mb2})R_{on1}}$$\n\n**Channel‑length modulation in M2:**\n$$R_{out}=r_{o2}+R_{on1}+(g_{m2}+g_{mb2})r_{o2}R_{on1},\\qquad\nA_v=-R_D\\frac{g_{m2}r_{o2}+[1+(g_{m2}+g_{mb2})r_{o2}]g_{m1}R_{on1}}{R_D+R_{out}}$$\n\nWith γ = 0, $g_{m2}R_{on1}=\\beta_2/\\beta_1$, so $R_{out}\\approx r_{o2}(1+\\beta_2/\\beta_1)$. For identical devices this is about $2r_o$, consistent with a transistor of doubled length.\n\n---\n\n**Bottom line:** M1 always operates in triode and M2 in saturation, so the pair acts as a single NMOS of $(W/L)_{eq}=\\big[(L/W)_1+(L/W)_2\\big]^{-1}$. The stage is an ordinary resistively loaded CS amplifier with $A_v=-\\mu_nC_{ox}(W/L)_{eq}(V_{in}-V_{TH})R_D$. Compared with a single device of the same width, it has lower $g_m$, higher output resistance, and the same single‑overdrive headroom.",
        "format": "markdown",
        "sha256": "19c4a4f0799e6cb7095dfa9ff69060a5b3f2261a64ec6331113b53f733919242"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS structure, the lower device’s triode operation, and the pair’s approximately summed effective channel length (with the appropriate unequal-width relation). The additional idealized gain and operating-region analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 28441,
        "total_tokens": 29972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 28441,
        "total_tokens": 29972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Source-Follower / Common-Gate Amplifier\n\n## 1. What the circuit is\n\n- **M1** has its gate at $V_{in}$ and its drain at $V_{DD}$ (ac ground). It is a **source follower (CD)**.\n- **M2** has its gate at the fixed bias $V_b$ (ac ground). Its input is its source and its output is its drain, so it is a **common-gate (CG)** stage.\n- **$I_1$** biases both devices, so $I_{D1}+I_{D2}=I_1$.\n\nThe circuit is a CD → CG cascade. Equivalently, it is a **differential pair with one gate tied to $V_b$ and a single-ended output**. M1 needs no load because its drain current is never sensed.\n\n## 2. DC operating point\n\nAssume matched devices and $V_{in}=V_b$. The tail current splits equally:\n\n$$I_{D1}=I_{D2}=\\frac{I_1}{2},\\qquad V_{GS}=V_{TH}+\\sqrt{\\frac{I_1}{\\mu_nC_{ox}W/L}}$$\n\n$$V_P=V_b-V_{GS},\\qquad V_{out}=V_{DD}-\\frac{R_DI_1}{2}$$\n\nHeadroom requirements:\n- **M2 in saturation:** $V_{out}\\ge V_b-V_{TH}$. The worst case is when M2 carries all of $I_1$, which requires $V_{DD}-R_DI_1\\ge V_b-V_{TH}$.\n- **Tail source:** $V_P=V_b-V_{GS2}$ must exceed the minimum voltage the $I_1$ source needs.\n- **M1** is always saturated, since its drain sits at $V_{DD}$.\n\n## 3. Large-signal behavior\n\nLet $\\Delta V = V_{in}-V_b$. The usual differential-pair result applies:\n\n$$I_{D1}-I_{D2}=\\tfrac12\\mu_nC_{ox}\\tfrac{W}{L}\\,\\Delta V\\sqrt{\\frac{4I_1}{\\mu_nC_{ox}W/L}-\\Delta V^2}$$\n\n$$V_{out}=V_{DD}-R_DI_{D2}=V_{DD}-\\frac{R_D}{2}\\big[I_1-(I_{D1}-I_{D2})\\big]$$\n\n- When $V_{in}\\ll V_b$, M1 is off and $V_{out}=V_{DD}-R_DI_1$.\n- When $V_{in}\\gg V_b$, M2 is off and $V_{out}=V_{DD}$.\n- The transition occurs over $|\\Delta V|<\\sqrt{2I_1/(\\mu_nC_{ox}W/L)}=\\sqrt2\\,V_{ov}$.\n\nThe result is an S-shaped, **noninverting** characteristic: $V_{out}$ rises with $V_{in}$.\n\n## 4. Small-signal gain\n\n**Ideal case ($\\lambda=\\gamma=0$).**\n1. Replace $V_{in}$ and M1 by their Thevenin equivalent: $v_{Th}=v_{in}$ and $R_{Th}=1/g_{m1}$.\n2. M2 is then a CG stage with source resistance $1/g_{m1}$, which gives:\n\n$$A_v=\\frac{v_{out}}{v_{in}}=\\frac{R_D}{\\dfrac{1}{g_{m1}}+\\dfrac{1}{g_{m2}}}=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\\;\\;\\xrightarrow{\\text{matched}}\\;\\;+\\frac{g_mR_D}{2}$$\n\nIntuition:\n- Node P moves by $v_P=v_{in}\\,g_{m1}/(g_{m1}+g_{m2})=v_{in}/2$.\n- So $V_{GS1}$ rises by $v_{in}/2$ and $V_{GS2}$ falls by $v_{in}/2$.\n- This gives $i_{D2}=-g_mv_{in}/2$ and $v_{out}=+g_mR_Dv_{in}/2$.\n\n**With body effect:**\n\n$$A_v=\\frac{g_{m1}(g_{m2}+g_{mb2})R_D}{g_{m1}+g_{mb1}+g_{m2}+g_{mb2}}\\;\\to\\;\\frac{g_mR_D}{2}\\ \\ (\\text{matched})$$\n\nThe body effect cancels for matched devices. Node P moves less, but M2 responds more strongly to its source voltage, and the two effects offset.\n\n**With channel-length modulation (matched):**\n\n$$A_v=\\frac{g_m r_o R_D}{2r_o+R_D}=\\frac{g_m}{2}\\,(R_D\\parallel 2r_o)$$\n\n## 5. Terminal impedances\n\n- **Input:** $R_{in}\\to\\infty$, because the signal drives a gate. A standalone CG stage would present only $1/g_m$; the follower removes that loading.\n- **Output:** with $R_S = r_{o1}\\parallel \\frac{1}{g_{m1}+g_{mb1}}$,\n\n$$R_{out}=R_D\\parallel\\Big\\{r_{o2}+\\big[1+(g_{m2}+g_{mb2})r_{o2}\\big]R_S\\Big\\}=R_D\\parallel 2r_o\\ \\ (\\text{matched})$$\n\n- **Consistency check:** the effective transconductance is $G_m=g_m/2$, so $A_v=G_mR_{out}$, matching Section 4.\n\n## 6. Frequency response: why this circuit is used\n\n**No Miller multiplication.** $C_{GD1}$ connects the input to $V_{DD}$, and $C_{GD2}$ connects the output to $V_b$. Both go to ac ground.\n\n**$C_{GS1}$ is bootstrapped.** The source of M1 follows the gate at about half amplitude, so:\n\n$$C_{in}\\approx C_{GD1}+\\frac{C_{GS1}}{2}$$\n\n**Node P is low impedance**, about $1/(g_{m1}+g_{m2})$. With an ideal input source:\n\n$$\\frac{V_{out}}{V_{in}}(s)=\\frac{g_{m2}R_D\\,(g_{m1}+sC_{GS1})}{\\big[g_{m1}+g_{m2}+s(C_{GS1}+C_P)\\big]\\big(1+sR_DC_{out}\\big)}$$\n\nwhere:\n- $C_P=C_{GS2}+C_{SB1}+C_{SB2}+C_{I1}$ is the capacitance at node P, including the tail source's capacitance $C_{I1}$.\n- $C_{out}=C_{GD2}+C_{DB2}+C_L$ is the capacitance at the output.\n\nThe pole at node P lies near $\\omega_T$. It is almost cancelled by the left-half-plane zero at $g_{m1}/C_{GS1}$, which comes from the feedforward path through $C_{GS1}$.\n\nAs a result, the response is essentially single-pole, set by the output node:\n\n$$\\omega_{-3\\text{dB}}\\approx\\frac{1}{(R_D\\parallel 2r_o)\\,C_{out}}$$\n\nThe circuit also offers good reverse isolation from output to input.\n\n## 7. Costs and trade-offs\n\n**Gain.** The gain is only $g_mR_D/2$, half that of a common-source stage with the same $g_m$, and current flows in two devices.\n\n**Noise.** It equals the noise of a full differential pair:\n\n$$\\overline{v_{n,in}^2}\\approx 2\\cdot\\frac{4kT\\gamma}{g_m}+\\frac{16kT}{g_m^2R_D}+\\frac{\\overline{I_{n,I1}^2}}{g_m^2}$$\n\n**No cancellation of tail or bias noise.** Because the output is single-ended, noise on $I_1$ reaches the output. Noise on $V_b$ is amplified by $-g_mR_D/2$, so $V_b$ must be a quiet, well-bypassed node.\n\n## Summary\n\nThis is a noninverting, high-input-impedance, Miller-free wideband amplifier:\n\n$$A_v=\\frac{R_D}{1/g_{m1}+1/g_{m2}}\\approx\\frac{g_mR_D}{2},\\qquad R_{in}\\to\\infty,\\qquad R_{out}\\approx R_D\\parallel 2r_o$$\n\nIt is a differential pair with one input held at $V_b$. It trades gain and noise for bandwidth and isolation.",
        "format": "markdown",
        "sha256": "c7bacd1b1ec4843b26074ca27f3c29b52750c8307a6a0208c48a5987ff751105"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower driving a common-gate stage (also a source-coupled pair), and gives the correct non-inverting gain. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2477,
        "output_tokens": 29018,
        "total_tokens": 31495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26075,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2477,
        "output_tokens": 29018,
        "total_tokens": 31495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26075,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Source-Follower / Common-Gate Stage\n\n## Topology\n\n- **M1** has its gate at the input, its drain at $V_{DD}$ (ac ground), and its output at its source P. It is a **source follower**.\n- **M2** has its gate at the fixed bias $V_b$ (ac ground), its input at its source P, and its output at its drain. It is a **common-gate stage** loaded by $R_D$.\n- Both share the tail current $I_1$. The circuit is therefore a **source-coupled differential pair** with $V_{in}$ on one gate, $V_b$ on the other, and a single-ended output. M1's drain can go straight to $V_{DD}$ because its current is never used. The bipolar equivalent is the CC–CB wideband stage.\n\n## 1. DC operating point\n\nAssume M1 = M2 and that the DC level of $V_{in}$ equals $V_b$.\n\n$$I_{D1}=I_{D2}=\\frac{I_1}{2},\\qquad V_{OV}=\\sqrt{\\frac{I_1}{\\mu_nC_{ox}W/L}},\\qquad g_m=\\sqrt{\\mu_nC_{ox}\\tfrac{W}{L}I_1}=\\frac{I_1}{V_{OV}}$$\n\n$$V_P=V_b-V_{TH}-V_{OV},\\qquad V_{out}=V_{DD}-\\tfrac12 R_DI_1$$\n\nHeadroom requirements:\n- M1 is always saturated, since its drain is at $V_{DD}$.\n- M2 needs $V_{out}\\ge V_b-V_{TH}$. The worst case is $V_{DD}-R_DI_1\\ge V_b-V_{TH}$.\n- The tail source needs $V_P\\ge V_{I1,\\min}$.\n\n## 2. Small-signal gain\n\nThe tail current is constant, so $i_{d1}=-i_{d2}$:\n\n$$g_{m1}(v_{in}-v_P)=-g_{m2}(0-v_P)\\;\\Rightarrow\\; v_P=\\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in}$$\n\n$$A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D=\\frac{R_D}{\\dfrac{1}{g_{m1}}+\\dfrac{1}{g_{m2}}}\\;\\;\\xrightarrow{M_1=M_2}\\;\\; +\\frac{g_mR_D}{2}$$\n\nThree equivalent ways to see this:\n- **SF + CG view:** M1 is a follower loaded by $1/g_{m2}$ (looking into M2's source), giving a gain of 1/2. M2 is a CG stage with gain $g_{m2}R_D$.\n- **Thevenin view:** M1 acts like $v_{in}$ in series with $1/g_{m1}$. The gain is then $R_D$ divided by the total resistance in the source path.\n- **Differential-pair view:** $v_{in}$ splits equally between $V_{GS1}$ and $V_{GS2}$. The single-ended output gives half the differential gain.\n\nThe stage is **non-inverting**: as $V_{in}$ rises, $V_P$ rises by $v_{in}/2$, $V_{GS2}$ falls, $I_{D2}$ falls, and $V_{out}$ rises.\n\n**Body effect cancels.** Including $g_{mb}$, $v_P = \\dfrac{g_m v_{in}}{2(g_m+g_{mb})}$. The follower gain drops, but the CG gain rises to $(g_m+g_{mb})R_D$. Hence $A_v = g_mR_D/2$ exactly. Fundamentally, both sources sit at the same node, so $V_{TH1}=V_{TH2}$ always.\n\n**With channel-length modulation** (matched devices, ideal tail):\n\n$$A_v=\\frac{g_m}{2}\\,(R_D\\parallel 2r_O)$$\n\nThat is, $G_m=g_m/2$ and $R_{out}=R_D\\parallel 2r_O$.\n\n## 3. Port impedances\n\n- **Input resistance:** $R_{in}\\to\\infty$, since the input is a gate.\n- **Output resistance:** $R_{out}=R_D\\parallel[r_{O2}+(1+g_{m2}r_{O2})(r_{O1}\\parallel 1/g_{m1})]=R_D\\parallel 2r_O$.\n- **Input capacitance:** $C_{in}\\approx C_{GD1}+C_{GS1}(1-\\tfrac12)=C_{GD1}+\\tfrac12C_{GS1}$.\n\nThere is **no Miller multiplication**:\n- $C_{GD1}$ has ac ground at M1's drain.\n- $C_{GD2}$ has ac ground at M2's gate.\n- $C_{GS1}$ is half-bootstrapped, because the source follows the gate with gain 1/2.\n\n## 4. Frequency response\n\nThis assumes an ideal input source and neglects $r_O$.\n\n$$\\frac{V_{out}}{V_{in}}(s)=\\frac{g_mR_D}{2}\\cdot\\frac{1+sC_{GS1}/g_m}{\\left(1+\\dfrac{sC_P}{2g_m}\\right)\\left(1+sR_DC_{out}\\right)}$$\n\nwhere $C_P=C_{GS1}+C_{GS2}+C_{SB1}+C_{SB2}+C_{I1}$ and $C_{out}=C_{DB2}+C_{GD2}+C_L$.\n\n- **Node P:** it is a low-impedance node, $1/(2g_m)$. Its pole at $2g_m/C_P$ lies near $\\omega_T$. It is partly cancelled by the LHP zero at $g_m/C_{GS1}\\approx\\omega_T$, caused by feedforward through $C_{GS1}$.\n- **Dominant pole:** the output pole sets BW ≈ $1/(R_DC_{out})$, giving GBW ≈ $g_m/(2C_{out})$.\n- **Source resistance:** with a source resistance $R_S$, the input pole is about $1/[R_S(C_{GD1}+C_{GS1}/2)]$. This is far higher than for a CS stage, where $C_{in}=C_{GS}+(1+g_mR_D)C_{GD}$.\n- **Reverse isolation:** the output reaches the input only via $r_{O2}$ into the low-impedance node P, then through $C_{GS1}$. Reverse isolation is therefore excellent (low kickback).\n\n## 5. Large-signal transfer characteristic\n\nLet $\\Delta V=V_{in}-V_b$, with $I_{D1}+I_{D2}=I_1$:\n\n$$V_{out}=V_{DD}-\\frac{R_DI_1}{2}+\\frac{g_mR_D}{2}\\,\\Delta V\\sqrt{1-\\frac{\\Delta V^2}{4V_{OV}^2}},\\qquad |\\Delta V|\\le\\sqrt2\\,V_{OV}$$\n\n- For $\\Delta V\\ge\\sqrt2V_{OV}$, M2 is off and $V_{out}=V_{DD}$.\n- For $\\Delta V\\le-\\sqrt2V_{OV}$, M1 is off and $V_{out}=V_{DD}-R_DI_1$.\n\nSince $I_{D2}-I_1/2=-\\tfrac12(I_{D1}-I_{D2})$ is odd in $\\Delta V$, the single-ended output ideally has no even-order distortion. The third harmonic is HD3 ≈ $(V_p/V_{OV})^2/32$.\n\n## 6. Noise\n\n$$\\overline{v_{n,in}^2}=\\frac{8kT\\gamma}{g_m}+\\frac{16kT}{g_m^2R_D}+\\frac{\\overline{i_{n,I1}^2}}{g_m^2}$$\n\n- Half of each transistor's noise current reaches $R_D$.\n- Because the output is single-ended, tail-source noise is not rejected.\n- Noise on $V_b$ is amplified exactly like the signal, so $V_b$ must be quiet.\n\n## 7. Trade-offs\n\nCompare with a CS stage using the same $R_D$ and $I_D=I_1/2$.\n\n**Costs:**\n- Half the gain ($g_mR_D/2$) for twice the current.\n- Roughly 2–4× the input-referred noise.\n- The DC level of $V_{in}$ must sit at $V_b$. Any offset is amplified by $g_mR_D/2$, and the stage saturates when $|\\Delta V|$ reaches $\\sqrt2V_{OV}$. In practice the input is AC-coupled with the gate biased at $V_b$.\n\n**Benefits:**\n- Non-inverting.\n- High input impedance, unlike a bare CG stage.\n- No Miller effect, so it stays broadband even with high source impedance.\n- Good reverse isolation.\n- Gain is set by $R_D/(1/g_{m1}+1/g_{m2})$ and is immune to body effect.\n\nTypical uses include broadband gain and level-shift stages, LO and clock buffers, and comparator preamplifiers.",
        "format": "markdown",
        "sha256": "4ccb4858e7138ef2d60c2519caf7c4caa7bc1444a57000548076f57a10726ff0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower driving a common-gate stage (equivalently, a source-coupled pair with M2 biased at Vb and output at its drain) and gives the correct non-inverting gain. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2477,
        "output_tokens": 37136,
        "total_tokens": 39613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2477,
        "output_tokens": 37136,
        "total_tokens": 39613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Source-Coupled CD–CG Amplifier\n\n## 1. What the circuit is\n\nM1 and M2 share a common source node (call it P), which is biased by the tail current I₁. This makes it a **source-coupled (differential) pair**, with two special features:\n\n- The \"second input\" is the DC bias V_b.\n- The output is taken single-ended. M1's drain goes straight to V_DD, so its current never reaches the load.\n\nThere are two equivalent ways to view it:\n\n1. **A differential pair** that amplifies (V_in − V_b) and has only one output.\n2. **A source follower (M1) driving a common-gate stage (M2)**, i.e., a CD–CG cascade.\n\nEither way, it is a **non-inverting amplifier with a high-impedance input**.\n\n**Assumptions:** M1 = M2, both in saturation, square law I_D = (k/2)(V_GS − V_TH)² with k = μₙC_ox(W/L), and bulk at ground.\n\n## 2. DC operating point\n\nAt V_in = V_b, each device carries half the tail current:\n\n$$I_{D1}=I_{D2}=\\frac{I_1}{2},\\qquad V_{ov}=\\sqrt{I_1/k},\\qquad V_P=V_b-V_{TH}-V_{ov},\\qquad V_{out}=V_{DD}-\\frac{R_DI_1}{2}$$\n\nBoth devices have the same V_SB, so body effect shifts both thresholds equally and does not disturb the balance.\n\nHeadroom requirements:\n\n- **M1:** it is always saturated, because its drain is at V_DD.\n- **M2:** it requires V_out ≥ V_b − V_TH. The worst case is when M2 carries all of I₁, giving V_DD − R_D I₁ ≥ V_b − V_TH.\n- **I₁:** the tail source needs V_P = V_b − V_GS to exceed its minimum operating voltage.\n\n## 3. Large-signal transfer characteristic\n\nThe input difference sets the gate-source difference, V_in − V_b = V_GS1 − V_GS2, while the currents must sum to I₁. This gives:\n\n$$I_{D1}-I_{D2}=\\frac{k}{2}\\,\\Delta V\\sqrt{\\frac{4I_1}{k}-\\Delta V^2},\\qquad \\Delta V=V_{in}-V_b$$\n\n$$V_{out}=V_{DD}-R_DI_{D2}=V_{DD}-\\frac{R_DI_1}{2}+\\frac{kR_D}{4}\\,\\Delta V\\sqrt{\\frac{4I_1}{k}-\\Delta V^2}$$\n\n| Input range | Device state | V_out |\n|---|---|---|\n| V_in ≤ V_b − √2·V_ov | M1 off, M2 carries all of I₁ | V_DD − R_D I₁ |\n| \\|V_in − V_b\\| < √2·V_ov | both devices on | equation above (S-shaped) |\n| V_in ≥ V_b + √2·V_ov | M2 off | V_DD |\n\nKey features of this characteristic:\n\n- It is a non-inverting S-curve centered at V_in = V_b.\n- The total output swing is exactly I₁R_D.\n- The curve is odd-symmetric about the bias point, so ideally only odd-order distortion appears:\n\n$$V_{out}-V_{out,Q}\\approx \\frac{g_mR_D}{2}\\,\\Delta V\\left(1-\\frac{\\Delta V^2}{8V_{ov}^2}\\right)$$\n\n## 4. Small-signal gain\n\n**Intuitive derivation (no body effect or channel-length modulation).**\n\n- Looking into M2's source, M1 sees a load of 1/g_m2.\n- M1 therefore acts as a follower driving 1/g_m2:\n\n$$\\frac{v_P}{v_{in}}=\\frac{g_{m1}}{g_{m1}+g_{m2}}\\approx\\frac12$$\n\n- M2 is a common-gate stage driven at its source:\n\n$$\\frac{v_{out}}{v_P}=g_{m2}R_D$$\n\n- Combining the two:\n\n$$A_v=\\frac{R_D}{1/g_{m1}+1/g_{m2}}=\\frac{g_mR_D}{2}$$\n\nPhysical picture: v_in is divided across 1/g_m1 + 1/g_m2. The resulting current, g_m v_in/2, raises I_D1 by some amount. Because I₁ is fixed, I_D2 drops by the same amount, and only that change flows through R_D.\n\n**Including body effect:**\n\n$$A_v=\\frac{g_{m1}(g_{m2}+g_{mb2})R_D}{g_{m1}+g_{mb1}+g_{m2}+g_{mb2}}\\;\\xrightarrow{M_1=M_2}\\;\\frac{g_mR_D}{2}$$\n\nSo for identical devices, g_mb cancels.\n\n**Including channel-length modulation (exact for identical devices).** The short-circuit transconductance is G_m = g_m/2 and the output resistance is R_out = R_D ∥ 2r_O. Therefore:\n\n$$A_v=\\frac{g_m}{2}\\,(R_D\\parallel 2r_O)$$\n\n**In terms of bias quantities.** Since g_m = I₁/V_ov:\n\n$$A_v = \\frac{R_D I_1/2}{V_{ov}}$$\n\nThis is half of what a common-source stage would give with the same drop across R_D and the same overdrive.\n\n## 5. Port impedances\n\n- **Input:** R_in → ∞, since the input is a gate.\n- **Output:** the resistance looking into M2's drain is degenerated by the follower's output resistance, r_O1 ∥ 1/(g_m1 + g_mb1):\n\n$$R_{out}=R_D\\parallel\\Big[r_{O2}+(1+(g_{m2}+g_{mb2})r_{O2})\\big(r_{O1}\\parallel\\tfrac{1}{g_{m1}+g_{mb1}}\\big)\\Big]=R_D\\parallel 2r_O\\approx R_D$$\n\n## 6. Frequency response (the main attraction)\n\nNo capacitance in this circuit is Miller-multiplied:\n\n- **C_GD1** connects the input to V_DD, which is AC ground, so it appears only once.\n- **C_GS1** is bootstrapped, because node P follows the input with v_P ≈ v_in/2. The input capacitance is therefore:\n  - C_in ≈ C_GD1 + C_GS1/2 for this circuit,\n  - versus C_GS + (1 + g_m R_D)·C_GD for a common-source stage.\n- **Node P** sees about 1/(2g_m). Its pole is therefore near ω_T:\n  - ω_P ≈ 2g_m/(C_GS1 + C_P), where C_P = C_GS2 + C_SB1 + C_SB2 + C_tail.\n- **Output node:** M2's gate is AC-grounded, so C_GD2 simply adds to the output capacitance. This gives the dominant pole:\n  - ω_out ≈ 1/[(R_D ∥ 2r_O)·C_out], where C_out = C_GD2 + C_DB2 + C_L.\n\nNeglecting r_O and C_GD1:\n\n$$\\frac{V_{out}}{V_{in}}(s)=\\frac{g_{m2}R_D\\,(g_{m1}+sC_{GS1})}{\\big[g_{m1}+g_{m2}+s(C_{GS1}+C_P)\\big]\\,(1+sR_DC_{out})}$$\n\n- The left-half-plane zero at g_m1/C_GS1 largely cancels the pole at P. If C_P = C_GS1, the divider at P is exactly frequency-independent.\n- The response is therefore essentially single-pole, with GBW ≈ g_m/(2C_out).\n- **Reverse isolation is excellent.** The output reaches the input only through r_O2/C_DS2 into the low-impedance node P.\n- **Caveat:** like any follower driving a capacitive node, the input admittance acquires a small negative real part at high frequencies when g_m1·C_P > g_m2·C_GS1. This matters only if the input is driven through an inductance.\n\n## 7. Noise and other non-idealities\n\n**Input-referred thermal noise:**\n\n$$\\overline{v_{n,in}^2}\\approx 2\\cdot\\frac{4kT\\gamma}{g_m}+\\frac{16kT}{g_m^2R_D}$$\n\nThis is at least twice the noise of a common-source stage with the same g_m.\n\n**Effects of the single-ended output:**\n\n- **Tail noise:** tail-current noise is not rejected. Half of it flows through R_D, which is equivalent to i_n,tail/g_m at the input.\n- **V_b noise:** any noise on V_b is the other input of the pair, so it appears directly as input noise.\n- **Supply ripple:** ripple on V_DD appears at V_out almost 1:1.\n\n**Offsets:** V_TH mismatch, or any difference between the DC level of V_in and V_b, is amplified by g_m R_D/2 and shifts V_out,Q. V_b must therefore track the DC level of V_in.\n\n## Summary\n\n| Property | Result |\n|---|---|\n| Gain | +g_m R_D/2, non-inverting (more precisely (g_m/2)(R_D ∥ 2r_O)) |\n| R_in / R_out | ∞ / ≈ R_D |\n| C_in | ≈ C_GD1 + C_GS1/2, with no Miller effect |\n| Bandwidth | set by ω_out ≈ 1/(R_D C_out); broadband |\n| Output range | V_DD − I₁R_D to V_DD, with clean limiting |\n\n**Advantages:** high input impedance, non-inverting gain, Miller-free broadband operation, good reverse isolation, and well-defined limiting with ideally only odd-order distortion.\n\n**Cost:** half the gain per unit g_m, because M1's current is wasted. It also has roughly twice the noise and no rejection of tail or supply noise.\n\n**Typical uses:** broadband or RF buffer and gain stages, comparator preamplifiers (low kickback), and limiting amplifiers. In these, V_b serves as the reference or threshold.",
        "format": "markdown",
        "sha256": "be61b290c2f36e9a6056a3a324c0b1f6b9b4a0839a61c8923e5f632f8533e984"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as both a source follower driving a common-gate stage and a source-coupled pair with M2 biased at Vb and the output at its drain. It also gives the correct non-inverting gain.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2477,
        "output_tokens": 36752,
        "total_tokens": 39229,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2477,
        "output_tokens": 36752,
        "total_tokens": 39229,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Why the Source Follower's Output Impedance Can Be Inductive\n\nIn short, $C_{GS}$ delays M1's response. At low frequencies M1 controls the output impedance, giving about $1/g_m$. At high frequencies $C_{GS}$ shorts the gate to the source, so the output looks back into $R_S$. If $R_S > 1/g_m$, the impedance rises with frequency, which is how an inductor behaves.\n\n## 1. Small-signal derivation\n\n**Assumptions:**\n- Set $V_{in}=0$.\n- Treat M2 as an ideal current source.\n- Keep only $C_{GS}$ of M1. Neglect $r_o$, body effect, $C_{GD}$ and $C_{SB}$.\n\n**Setup:** Apply a test voltage $V_X$ at the output and let $I_X$ be the current it supplies. Let $V_1 = V_{GS1}$. The current in $C_{GS}$ can only flow through $R_S$, so:\n\n- KCL at the output: $(g_m + C_{GS}s)\\,V_1 = -I_X$\n- Gate loop: $V_X = -V_1 - R_S C_{GS}s\\,V_1 = -(1+R_SC_{GS}s)\\,V_1$\n\nDividing the two gives\n\n$$Z_{out}=\\frac{V_X}{I_X}=\\frac{1+R_SC_{GS}s}{g_m+C_{GS}s}$$\n\n## 2. Frequency behavior\n\n| Frequency | $Z_{out}$ |\n|---|---|\n| $\\omega \\to 0$ | $1/g_m$ |\n| $\\omega \\to \\infty$ | $R_S$ |\n\n- $Z_{out}$ has a zero at $1/(R_SC_{GS})$ and a pole at $g_m/C_{GS}$.\n- If $R_S > 1/g_m$, the zero comes first, so $|Z_{out}|$ rises from $1/g_m$ to $R_S$.\n- The reactance is positive in this case:\n\n$$\\operatorname{Im}\\{Z_{out}(j\\omega)\\}=\\frac{\\omega C_{GS}(g_mR_S-1)}{g_m^2+\\omega^2C_{GS}^2}>0 \\quad \\text{for } g_mR_S>1$$\n\nThe impedance is exactly equivalent to this RL network:\n\n$$Z_{out}=\\underbrace{\\frac{1}{g_m}}_{R_2}+\\Big[\\underbrace{\\left(R_S-\\tfrac{1}{g_m}\\right)}_{R_1}\\ \\Big\\|\\ sL\\Big],\\qquad L=\\frac{C_{GS}}{g_m}\\left(R_S-\\frac{1}{g_m}\\right)$$\n\nThis is $R_2$ in series with ($R_1$ in parallel with $L$).\n\n## 3. Physical explanation\n\n- **Low frequency:** $C_{GS}$ is open, so no current flows in $R_S$. The gate is held at ac ground. Any change in $V_{out}$ appears fully as $V_{GS}$, and M1 opposes it with a current of $g_mV_X$. The result is a low impedance, $1/g_m$.\n- **High frequency:** $C_{GS}$ acts as a short. The gate is dragged along with the source, so $V_{GS}$ cannot change and M1's corrective current disappears. The output simply sees $R_S$ through $C_{GS}$.\n- **Time domain:** Suppose the load suddenly draws an extra current $\\Delta I$.\n  - At first, $C_{GS}$ acts like a battery. $V_{GS}$, and so M1's current, cannot change instantly.\n  - $\\Delta I$ must therefore flow through $C_{GS}$ and $R_S$, and the output drops by $R_S\\Delta I$.\n  - As $C_{GS}$ charges, M1 gradually takes over and the drop settles to $\\Delta I/g_m$:\n\n$$\\Delta V_{out}(t)=-\\Delta I\\left[\\frac{1}{g_m}+\\left(R_S-\\frac{1}{g_m}\\right)e^{-g_mt/C_{GS}}\\right]$$\n\nA large voltage that appears immediately on a current step and then decays is the signature of an inductor ($v = L\\,di/dt$). If $R_S<1/g_m$, the opposite happens and $Z_{out}$ looks capacitive.\n\n## 4. Why it matters\n\n- **It is the usual case.** Source followers normally buffer high-impedance nodes, so $R_S > 1/g_m$ is typical.\n- **It causes peaking and ringing.** The inductive output impedance combines with the load capacitance to form an LC-like network. This produces peaking in the frequency response and ringing in the step response.\n- **It can be useful.** The same effect is used on purpose as an \"active inductor.\" M1 acts as a gyrator that turns $C_{GS}$ into an inductance $L \\approx R_SC_{GS}/g_m$ when $R_S \\gg 1/g_m$.",
        "format": "markdown",
        "sha256": "d9a6387cab30e16a54c832907cbb134f8a81481755c83b37175f264fba1b13a6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and explains the impedance transition from about 1/gm at low frequency to RS at high frequency as Cgs couples gate and source. It gives the correct condition RS > 1/gm for rising, inductive behavior and supports it with a correct impedance expression.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1720,
        "output_tokens": 12877,
        "total_tokens": 14597,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11170,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1720,
        "output_tokens": 12877,
        "total_tokens": 14597,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11170,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Why the Source Follower's Output Impedance Can Be Inductive\n\nThe impedance seen at the output is about $1/g_m$ at low frequencies and rises to $R_S$ at high frequencies. If $R_S > 1/g_m$, the impedance increases with frequency, which is how an inductor behaves.\n\n## Small-signal derivation\n\nMake these assumptions:\n- Set $V_{in}=0$, so $R_S$ connects the gate of M1 to ac ground.\n- Treat M2 as an ideal current source.\n- Neglect body effect, $r_O$, $C_{GD}$ and $C_{SB}$.\n\nApply a test voltage $V_X$ at the output. Let $I_X$ be the current flowing into the node, and let $V_1=V_{GS1}$.\n\n**KCL at the source.** Both $g_mV_1$ and the $C_{GS}$ current flow into the node:\n$$I_X = -(g_m + sC_{GS})\\,V_1$$\n\n**Gate voltage.** The $C_{GS}$ current comes from ground through $R_S$, so $V_G=-sR_SC_{GS}V_1$. Therefore:\n$$V_X = V_G - V_1 = -(1+sR_SC_{GS})\\,V_1$$\n\nDividing the two gives:\n$$\\boxed{Z_{out}=\\frac{V_X}{I_X}=\\frac{1+sR_SC_{GS}}{g_m+sC_{GS}}}$$\n\n## Interpretation\n\n**Low frequency ($\\omega\\to 0$): $Z_{out}\\to 1/g_m$.**\n- $C_{GS}$ is open, so the gate stays at ac ground.\n- Any change at the output appears fully as a change in $V_{GS}$.\n- M1 therefore absorbs the current $g_mV_X$.\n\n**High frequency ($\\omega\\to\\infty$): $Z_{out}\\to R_S$.**\n- $C_{GS}$ shorts the gate to the source, so $V_{GS}$ cannot change.\n- M1's current is frozen.\n- The test current can only flow through $C_{GS}$ and $R_S$.\n\n$Z_{out}$ has a zero at $1/(R_SC_{GS})$ and a pole at $g_m/C_{GS}\\approx\\omega_T$. If $R_S>1/g_m$, the zero comes first, and $|Z_{out}|$ rises with frequency from $1/g_m$ to $R_S$. The reactance confirms this:\n\n$$\\mathrm{Im}\\{Z_{out}(j\\omega)\\}=\\frac{\\omega C_{GS}\\,(g_mR_S-1)}{g_m^2+\\omega^2C_{GS}^2}$$\n\nThis is positive (inductive) whenever $g_mR_S>1$. If $R_S<1/g_m$, $|Z_{out}|$ simply falls with frequency and there is no inductive behavior.\n\n## Equivalent passive network\n\nThe expression can be rewritten exactly as\n\n$$Z_{out}=\\frac{1}{g_m}+\\big(R_1\\parallel sL\\big),\\qquad R_1=R_S-\\frac{1}{g_m},\\qquad L=\\frac{C_{GS}}{g_m}\\Big(R_S-\\frac{1}{g_m}\\Big)\\approx\\frac{R_S}{\\omega_T}$$\n\nFor $R_S>1/g_m$, every element is positive. The output therefore looks like a resistor $1/g_m$ in series with a real inductor $L$ shunted by $R_1$.\n\n## Physical intuition\n\nM1 can respond to an output disturbance only through its $V_{GS}$. But $V_{GS}$ is held by $C_{GS}$, which can change only by charging through $R_S$.\n\nSuppose a voltage step $V$ is applied at the output:\n1. At first, the gate is dragged along through $C_{GS}$, so $V_{GS}$ is unchanged and M1 does nothing.\n2. The only current is $V/R_S$, flowing through the gate resistor.\n3. As $C_{GS}$ charges (time constant $R_SC_{GS}$), the gate returns to ac ground and $V_{GS}$ changes by $-V$.\n4. M1's current gradually builds up to $g_mV$.\n\nA current that builds up slowly after a voltage step, lagging the voltage, is exactly what an inductor does. The effect appears only if the slow path through the transistor ($1/g_m$) has lower impedance than the fast path ($R_S$), i.e., $R_S>1/g_m$.\n\n## Consequences\n\nThis situation arises when the follower is driven from a high-impedance node, such as the output of a high-gain stage.\n- **Unwanted resonance:** The inductive $Z_{out}$ resonates with the load capacitance (C_L plus the junction capacitances of M1 and M2 at the output node). This causes peaking in the frequency response and ringing in the step response.\n- **Robustness of the result:** Body effect, $r_{O1}$ and $r_{O2}$ only add resistances in parallel with this network, so the condition stays $g_mR_S>1$.\n- **Useful application:** The same behavior is used deliberately to build \"active inductors.\"",
        "format": "markdown",
        "sha256": "fb355802288919425d8b1868522245aa3e613b0655e7390da7bafac9e0da292c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower mechanism: Zout transitions from about 1/gm at low frequency to RS at high frequency as Cgs couples the gate to the source, and is inductive when RS > 1/gm. The derivation and equivalent-network interpretation support the conclusion.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1720,
        "output_tokens": 19732,
        "total_tokens": 21452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17977,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1720,
        "output_tokens": 19732,
        "total_tokens": 21452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17977,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Why the Source-Follower Output Impedance Can Be Inductive\n\n## 1. Small-signal output impedance\n\nSet $V_{in}=0$ and apply a test voltage $V_X$ at the output, with $I_X$ flowing into the output node. Keep only $C_{GS1}$, and neglect body effect, channel-length modulation, $C_{GD}$, and $C_{SB}$. M2 is then an ideal current source, which is an open circuit for small signals.\n\n**KCL at the output node.** M1 and $C_{GS1}$ both carry current into the output node, and the test source must absorb that current:\n\n$$V_{GS1}C_{GS1}s + g_mV_{GS1} = -I_X$$\n\n**Voltage around the gate loop.** The current in $C_{GS1}$ also flows through $R_S$, so $V_G = -R_SC_{GS1}sV_{GS1}$. Since $V_X = V_G - V_{GS1}$:\n\n$$R_SC_{GS1}s\\,V_{GS1} + V_{GS1} = -V_X$$\n\nDividing the two equations gives\n\n$$\\boxed{Z_{out}=\\frac{V_X}{I_X}=\\frac{1+R_SC_{GS1}s}{g_m+C_{GS1}s}}$$\n\n## 2. Interpreting the result\n\n- **Low frequency:** $Z_{out}\\to 1/g_m$, the familiar follower output resistance.\n- **High frequency:** $Z_{out}\\to R_S$, because $C_{GS1}$ shorts the gate to the source.\n- There is a zero at $\\omega_z = 1/(R_SC_{GS1})$ and a pole at $\\omega_p = g_m/C_{GS1}$.\n\n**When $R_S > 1/g_m$:**\n\n- The zero comes before the pole.\n- $|Z_{out}|$ rises with frequency, from $1/g_m$ to $R_S$.\n- The reactance is positive:\n\n$$\\text{Im}\\{Z_{out}(j\\omega)\\}=\\frac{\\omega C_{GS1}(g_mR_S-1)}{g_m^2+\\omega^2C_{GS1}^2}>0$$\n\nAn impedance that grows with frequency and has positive reactance behaves like an inductor. If $R_S<1/g_m$, the impedance instead falls with frequency.\n\n**Equivalent circuit.** Writing $Z_{out} - 1/g_m$ as a parallel R–L gives\n\n$$Z_{out}=\\frac{1}{g_m}+\\left(R_1\\,\\|\\,sL\\right),\\qquad R_1=R_S-\\frac{1}{g_m},\\qquad L=\\frac{C_{GS1}}{g_m}\\left(R_S-\\frac{1}{g_m}\\right)$$\n\nBoth $R_1$ and $L$ are positive (physical) only when $R_S>1/g_m$.\n\n## 3. Physical explanation\n\nA follower has low output impedance because of feedback. When $V_{out}$ changes, $V_{GS1}$ changes, and M1 corrects the change with a current $g_m\\Delta V$. This only works if the gate is held at a fixed potential. Here the gate is held only weakly, through $R_S$, while $C_{GS1}$ ties it to the source.\n\nConsider stepping $V_{out}$ up by $\\Delta V$:\n\n- **At $t=0^+$:** The voltage across $C_{GS1}$ cannot change instantly, so the gate jumps up together with the source (bootstrapping). $V_{GS1}$ is unchanged, so M1's current does not change. The only current is $\\Delta V/R_S$ through $C_{GS1}$ and $R_S$. The output looks like $R_S$.\n- **As time passes:** $C_{GS1}$ charges through $R_S$ with time constant $\\approx R_SC_{GS1}$. The gate returns to its quiescent value and $V_{GS1}$ drops by $\\Delta V$. M1's current falls by $g_m\\Delta V$, so the test source must eventually supply $I_X = g_m\\Delta V$. The output now looks like $1/g_m$.\n\nIf $R_S > 1/g_m$, the current starts small ($\\Delta V/R_S$) and builds up to a larger value ($g_m\\Delta V$). The current lags the voltage, which is exactly how an inductor responds ($v = L\\,di/dt$).\n\nIn short, the transistor's corrective current is delayed by the $R_S C_{GS1}$ network, and a delayed current response appears as inductance.\n\n## 4. Practical consequence\n\nWhen the follower drives a load capacitance, this inductance and $C_L$ form an RLC network. The result can be peaking in the frequency response and ringing in the step response. This is especially likely when the follower is driven from a high-impedance node (large $R_S$).",
        "format": "markdown",
        "sha256": "d79e6adc7c8ff64067a8e07da1a2c815863a0bc801b33bfa2124fd5615987812"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output impedance and explains its transition from about 1/gm at low frequencies to Rs at high frequencies as Cgs bootstraps the gate to the source. It correctly identifies the rising, inductive behavior when Rs > 1/gm; the additional equivalent-circuit and transient explanations are consistent.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1720,
        "output_tokens": 10976,
        "total_tokens": 12696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9350,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1720,
        "output_tokens": 10976,
        "total_tokens": 12696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9350,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the M1–M2 Circuit: A Latch, Not a Transimpedance Amplifier\n\n## 1. Topology\n\nBoth transistors are NMOS with grounded sources.\n\n- **M1 with R_D1** is a common‑source (CS) stage from X to V_out. Its gain is $A_1=-g_{m1}R_{D1}$. You can replace $R_{D1}$ with $R_{D1}\\|r_{o1}$ if needed.\n- **M2** is also a CS stage, from V_out (its gate) to X (its drain). Node X sees the ideal current source (∞), the gate of M1 (∞) and $r_{o2}$. So $A_2=-g_{m2}r_{o2}$, which is the intrinsic gain.\n\nThe gate of each device is tied to the drain of the other. This is a cross‑coupled pair, or two inverters connected back to back. With two inversions around the loop, the feedback is **positive (regenerative)**.\n\n## 2. The \"intended\" DC point\n\nThe gate of M1 draws no current, so KCL at X forces $I_{D2}=I_{in}$. If both devices are saturated:\n\n$$V_{out}=V_{GS2}=V_{TH}+\\sqrt{\\frac{2I_{in}}{\\mu_nC_{ox}(W/L)_2}},\\qquad I_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}}$$\n\nThis makes the circuit look like a \"boosted\" diode‑connected M2, i.e., an I‑to‑V converter.\n\n## 3. Small‑signal analysis around that point\n\nThe node equations are:\n\n$$i_{in}=g_{m2}v_{out}+\\frac{v_X}{r_{o2}},\\qquad v_{out}=-g_{m1}R_{D1}v_X$$\n\n**Loop gain.** Break the loop at the gate of M2, a high‑impedance node:\n\n$$T=+\\,g_{m1}R_{D1}\\,g_{m2}r_{o2}\\gg1$$\n\nThe returned signal has the same sign as the injected one, which confirms positive feedback.\n\n**Closed‑loop quantities:**\n\n$$\\frac{v_{out}}{i_{in}}=\\frac{g_{m1}R_{D1}r_{o2}}{T-1}\\approx\\frac{1}{g_{m2}}$$\n\n$$R_{in}=\\frac{v_X}{i_{in}}=-\\frac{r_{o2}}{T-1}\\approx-\\frac{1}{g_{m1}g_{m2}R_{D1}}$$\n\n$$R_{out}=R_{D1}\\,\\Big\\|\\Big(-\\frac{1}{g_{m1}g_{m2}r_{o2}}\\Big)$$\n\nThe input and output resistances are **negative**, which is a red flag. The tidy result $1/g_{m2}$ describes an equilibrium that cannot be sustained.\n\n## 4. Stability\n\nAdd the node capacitances $C_X$ and $C_{out}$. The characteristic polynomial is:\n\n$$D(s)=C_XC_{out}s^2+\\Big(\\frac{C_X}{R_{D1}}+\\frac{C_{out}}{r_{o2}}\\Big)s+\\frac{1-T}{R_{D1}r_{o2}}$$\n\nFor $T>1$, $D(0)<0$ and $D(\\infty)>0$. Therefore there is a real right‑half‑plane pole, approximately:\n\n$$p\\approx\\sqrt{\\frac{g_{m1}g_{m2}}{C_XC_{out}}}$$\n\nThe bias point is metastable. Any noise grows as $e^{pt}$ and the circuit regenerates. Adding the gate–drain capacitances does not change $D(0)$, so the conclusion holds.\n\n## 5. Actual large‑signal behavior\n\n**State A (small $I_{in}$).**\n- M1 is off and $V_{out}=V_{DD}$.\n- M2 is in deep triode and absorbs $I_{in}$, giving $V_X\\approx I_{in}/[\\mu_nC_{ox}(W/L)_2(V_{DD}-V_{TH})]$.\n- This state is stable because the loop gain is about zero while M1 is off.\n\n**Trip.** As $I_{in}$ rises, $V_X$ approaches $V_{TH1}$ and M1 begins to conduct.\n- V_out falls, so M2's on‑resistance rises, which raises V_X further.\n- When the incremental loop gain reaches 1, the circuit snaps over. This happens at roughly $I_{in}\\approx\\mu_nC_{ox}(W/L)_2V_{TH1}(V_{DD}-V_{TH2}-V_{TH1}/2)$.\n\n**State B.**\n- M1 is in triode and V_out is low, so M2 is (nearly) off and cannot absorb $I_{in}$.\n- X therefore rises to the compliance limit of the real current source. With an ideal source there is no DC solution at all.\n\n**Return.** The circuit returns to state A only when $I_{in}$ falls below the small current M2 can sink with its gate at the low V_out. This gives strong hysteresis.\n\n## Conclusion\n\nThe circuit is not a linear transimpedance amplifier. It is a regenerative latch, effectively a current comparator or Schmitt trigger with hysteresis.\n\nTo obtain stable I‑to‑V conversion, the loop needs an odd number of inversions. Any of these works:\n\n- **Follower feedback:** connect M2 with its gate at V_out, source at X and drain at V_DD, plus a bias current sink at X. This gives $R_{in}\\approx1/[g_{m2}(1+g_{m1}R_{D1})]$.\n- **Resistor feedback:** use a resistor $R_F$ from V_out to X, giving a transimpedance of about $-R_F$.\n- **Active diode:** drive M2's gate from X through a non‑inverting stage, such as a source follower.",
        "format": "markdown",
        "sha256": "e68f3f8a29f7b10d080321b17a428fc07c6835f54bfbf971a71537ee5038491f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as tied to Vout rather than its drain, recognizes the positive-feedback loop, and gives the key consequences: negative input resistance, instability, and latching. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 33828,
        "total_tokens": 36038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31818,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 33828,
        "total_tokens": 36038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31818,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis: M1/M2 Circuit with Input Current I_in\n\n**Summary:** This looks like a shunt-feedback transimpedance amplifier (TIA) in which M2 replaces the usual feedback resistor R_F. It is not one. The loop contains two inversions, so the feedback is **positive**. The loop gain is much greater than 1, node X presents a negative resistance, and the bias point is unstable. The circuit behaves as a latch or current comparator, not as a linear TIA.\n\n---\n\n## 0. Topology and bias\n\n- **M1** is a common-source (CS) stage from X to V_out. Its gain is A₁ = −g_m1·R_out, where R_out = R_D1 ∥ r_o1.\n- **M2** is a CS transconductor from V_out to X. It senses V_out and pulls a current out of X.\n- **DC bias:** M1's gate draws no current, so all of I_in must flow in M2:\n\n$$I_{D2}=I_{in}\\;\\Rightarrow\\;V_{out}=V_{GS2}=V_{TH2}+\\sqrt{\\frac{2I_{in}}{\\mu_nC_{ox}(W/L)_2}}$$\n\n- V_X settles wherever M1 must sit so that I_D1 = (V_DD − V_out)/R_D1.\n\n## 1. Feedback polarity\n\nFollow a small increase in V_X around the loop:\n\nV_X↑ → I_D1↑ → V_out↓ → I_D2↓ → less current is removed from X → V_X↑ further\n\nThe perturbation reinforces itself, so the feedback is positive. This is the same structure as a cross-coupled latch: two inverting CS stages in a ring.\n\nWith a resistor R_F from V_out to X instead, V_out↓ would draw *more* current from X, giving negative feedback.\n\n## 2. Loop gain\n\nBreak the loop at M1's gate and treat I_in as an open circuit:\n\n$$\\frac{v_X}{v_t}=[-g_{m1}R_{out}]\\,[-g_{m2}r_{o2}]=+\\,g_{m1}g_{m2}R_{out}r_{o2}\\equiv T$$\n\n- The returned signal is in phase with the test signal.\n- T is typically much greater than 1. For example, g_m1·R_out ≈ 5 and g_m2·r_o2 ≈ 20 give T ≈ 100.\n\n## 3. Formal small-signal results\n\nWrite KCL at the two nodes:\n\n$$v_{out}=-g_{m1}R_{out}v_X ,\\qquad i_{in}=g_{m2}v_{out}+\\frac{v_X}{r_{o2}}$$\n\nSolving gives the input resistance at X:\n\n$$R_X=\\frac{v_X}{i_{in}}=\\frac{r_{o2}}{1-T}=r_{o2}\\,\\Big\\|\\Big(\\!-\\frac{1}{g_{m1}g_{m2}R_{out}}\\Big)\\approx-\\frac{1}{g_{m1}g_{m2}R_{out}}$$\n\nIt also gives the transimpedance:\n\n$$\\frac{v_{out}}{i_{in}}=\\frac{g_{m1}R_{out}r_{o2}}{T-1}\\approx\\frac{1}{g_{m2}}\\qquad(\\text{exactly }1/g_{m2}\\text{ if }\\lambda=0)$$\n\nThe output node likewise sees R_out ∥ [−1/(g_m1·g_m2·r_o2)], which is also negative.\n\n**How to read these results:**\n- Injecting current into X makes V_X go *down*. That is the signature of negative resistance.\n- The transimpedance 1/g_m2 looks harmless. The closed-loop formula tends to 1/β = 1/g_m2 whenever |loop gain| → ∞, regardless of the loop's sign.\n- So a DC operating-point plus AC simulation would converge to this point and appear to work. Only a transient or stability analysis exposes the problem.\n\n## 4. Stability\n\nAdd the node capacitances:\n- C_X = C_GS1 + C_DB2 + source capacitance\n- C_out = C_DB1 + C_GS2 + load capacitance\n\nDefine τ_X = r_o2·C_X and τ_o = R_out·C_out. The transfer function becomes:\n\n$$\\frac{V_{out}}{I_{in}}(s)=\\frac{g_{m1}R_{out}r_{o2}}{T-(1+s\\tau_X)(1+s\\tau_o)}$$\n\n**Conditions for instability:**\n- The characteristic polynomial has constant term ∝ (1 − T) < 0 and a positive leading coefficient. This holds for any capacitor values, including C_GD1.\n- Therefore there is exactly one real right-half-plane pole.\n- The discriminant, (τ_X − τ_o)² + 4Tτ_Xτ_o, is always positive, so both poles are real. There is no ringing; the response is a pure exponential runaway (regeneration), v(t) ∝ e^(t/τ_reg).\n\n**Regeneration time constant:** for T ≫ 1, approximately\n\n$$\\frac{1}{\\tau_{reg}}\\approx\\sqrt{\\frac{g_{m1}g_{m2}}{C_XC_{out}}}$$\n\n## 5. Large-signal behavior: a bistable circuit\n\nThe intended point, with both transistors saturated, is a saddle point. Any noise pushes the circuit toward one of two states.\n\n**Low state (small I_in):**\n- M1 is off and V_out ≈ V_DD.\n- M2 is in deep triode and sinks I_in, so V_X ≈ I_in·R_on2, where R_on2 = 1/[μnC_ox(W/L)₂(V_DD − V_TH2)].\n- This state is stable because the loop is broken (g_m1 ≈ 0). It holds while I_in·R_on2 is below roughly V_TH1.\n\n**High state:**\n- Once I_in exceeds about V_TH1/R_on2, M1 turns on. V_out falls, M2 can sink less current, and X rises regeneratively.\n- X climbs until the input source runs out of headroom.\n- M1 ends up in deep triode with V_out ≈ V_DD·R_on1/(R_on1 + R_D1), and M2 is nearly or fully off.\n\n**Returning to the low state:**\n- I_in must fall below what M2 can sink at that low V_out.\n- If V_out < V_TH2, M2 is completely off. X then floats high even after I_in is removed, so the circuit stores its state.\n\nThe result is a current comparator or latch with hysteresis, not a linear amplifier.\n\n## 6. If a TIA was intended\n\nThe loop needs a net inversion, so that the feedback is negative. The standard fix is to replace M2 with a resistor R_F from V_out to X:\n\n$$\\frac{V_{out}}{I_{in}}\\approx -R_F\\frac{g_{m1}R_{D1}}{1+g_{m1}R_{D1}},\\qquad R_{in}=\\frac{R_F+R_{D1}}{1+g_{m1}R_{D1}}$$\n\nAnother option is a non-inverting return device, such as a properly biased source follower from V_out to X.",
        "format": "markdown",
        "sha256": "b6f0164e0018828fdaa54b4307ace8a57d8ea22f73939533c9d758e5a429db16"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2 as controlled by Vout rather than diode-connected, traces the positive-feedback loop, and explains the resulting negative input resistance and instability/latching. These meet the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 37512,
        "total_tokens": 39722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35075,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 37512,
        "total_tokens": 39722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35075,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the M1–M2 Feedback Circuit\n\n**Summary:** the circuit looks like a shunt‑feedback transimpedance amplifier, but its feedback is **positive**, and its loop gain is much greater than 1. It is really a latch, not an amplifier.\n\n## 1. What the circuit appears to be\n\n- **M1** is a common‑source stage. Its input is X, its output is V_out, and its gain is $-g_{m1}R_{D1}$ (use $R_{D1}\\parallel r_{O1}$ if $r_{O1}$ is included).\n- **M2** senses V_out at its gate and returns a current (its drain current) to node X, in parallel with I_in.\n\nThis is voltage‑sensing, current‑returning (shunt‑shunt) feedback. It looks like a transimpedance amplifier (TIA) in which the transconductor M2 replaces the usual feedback resistor.\n\n## 2. Polarity of the feedback\n\nFollow a small disturbance around the loop:\n\n$$V_X\\uparrow\\;\\Rightarrow\\; I_{D1}\\uparrow\\;\\Rightarrow\\; V_{out}\\downarrow\\;\\Rightarrow\\; I_{D2}\\downarrow\\;\\Rightarrow\\;\\text{less current drained from X}\\;\\Rightarrow\\; V_X\\uparrow\\uparrow$$\n\nThe disturbance reinforces itself, so the feedback is **positive**.\n\n- Both M1 and M2 are common‑source (inverting) stages. Two inversions around a loop give positive feedback.\n- M1 and M2 form a **cross‑coupled pair**: each gate is driven by the other device's drain.\n- M1's load is R_D1. M2's load is the current source I_in.\n\n## 3. Loop gain\n\nSet $i_{in}=0$, break the loop at M2's gate, and apply a test voltage $v_t$. Node X sees only $r_{O2}$, because M1's gate and the ideal current source are open circuits:\n\n$$v_X=-g_{m2}r_{O2}\\,v_t,\\qquad v_{out}=-g_{m1}R_{D1}v_X=+\\,g_{m1}R_{D1}\\,g_{m2}r_{O2}\\,v_t$$\n\nThe signal returns in phase, with magnitude\n\n$$L=g_{m1}R_{D1}\\cdot g_{m2}r_{O2}\\gg 1$$\n\nL is large because $g_{m2}r_{O2}$ is M2's intrinsic gain. If λ = 0, L is infinite.\n\n## 4. Formal small‑signal results\n\nApply KCL at X, $i_{in}=g_{m2}v_{out}+v_X/r_{O2}$, together with $v_{out}=-g_{m1}R_{D1}v_X$:\n\n$$\\frac{v_{out}}{i_{in}}=\\frac{g_{m1}R_{D1}r_{O2}}{L-1}\\approx+\\frac{1}{g_{m2}}$$\n\nThis has the form $A/(1+A\\beta)$ with $A=-g_{m1}R_{D1}r_{O2}$ and $\\beta=g_{m2}$. The product $A\\beta=-L$ is negative, which confirms positive feedback.\n\nThe terminal impedances are:\n\n$$R_{in}=\\frac{r_{O2}}{1-L}\\approx-\\frac{1}{g_{m1}g_{m2}R_{D1}},\\qquad R_{out}=\\frac{R_{D1}}{1-L}\\approx-\\frac{1}{g_{m1}g_{m2}r_{O2}}$$\n\nThese are red flags:\n- A single CS stage is giving a **non‑inverting** transimpedance.\n- The impedances are not reduced, as negative shunt feedback would do. They become **negative**.\n\n## 5. Stability\n\nInclude the node capacitances $C_X$ and $C_{out}$:\n\n$$\\frac{v_{out}}{i_{in}}=\\frac{g_{m1}R_{D1}r_{O2}}{L-(1+s\\,r_{O2}C_X)(1+s\\,R_{D1}C_{out})}$$\n\nThe characteristic equation is:\n\n$$r_{O2}C_XR_{D1}C_{out}\\,s^2+(r_{O2}C_X+R_{D1}C_{out})\\,s+(1-L)=0$$\n\nFor L > 1 the constant term is negative, so there is one real pole in the right half‑plane:\n\n$$s_p\\approx\\sqrt{\\frac{g_{m1}g_{m2}}{C_XC_{out}}}\\qquad (L\\gg1)$$\n\nAny noise therefore grows as $e^{s_pt}$. This is latch regeneration, with time constant about $\\sqrt{C_XC_{out}/(g_{m1}g_{m2})}$. The \"gain\" of $1/g_{m2}$ is never actually observed.\n\n## 6. Large‑signal behavior\n\n**The intended bias point is metastable.** With both devices saturated, $I_{D2}=I_{in}$ requires $V_{out}=V_{TH2}+\\sqrt{2I_{in}/\\mu_nC_{ox}(W/L)_2}$. This point exists, but it is unstable, like the balanced point of a latch.\n\nThe circuit regenerates into one of two stable states. In each, one device is off or in triode, so the loop gain drops below 1:\n\n1. **X low:** M1 is off and V_out ≈ V_DD. M2 is in deep triode and sinks I_in with $V_X\\approx I_{in}R_{on2}$.\n2. **X high:** V_out is low, so M2 is nearly off and cannot absorb I_in. I_in charges X high until the source runs out of headroom. M1 is in triode.\n\nWhich state results depends on the initial conditions and on I_in. The circuit is bistable with hysteresis, so it behaves as a current‑input latch or comparator.\n\n## 7. Conclusion and fix\n\nThe circuit cannot work as a linear TIA. Around a single inverting stage, the feedback element must be non‑inverting. Options include:\n\n- A resistor $R_F$ from V_out to X, which gives $v_{out}/i_{in}\\approx -R_F$.\n- M2 used as a source‑follower or common‑gate element instead of a common‑source one.\n- An additional inverting stage added in the forward path.",
        "format": "markdown",
        "sha256": "dbf4531d502de08328e09ac833e44d027986cb6b6e96f761f958ab45eb4cbd5c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as tied to Vout, the positive-feedback loop through M1 and M2, and the resulting negative input resistance and instability/latching. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 30636,
        "total_tokens": 32846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28505,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 30636,
        "total_tokens": 32846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28505,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the CG–CS Feedback Transimpedance Amplifier\n\n## 1. What the circuit is\n\n- **M₁** is a common-gate stage. Its gate is at AC ground (V_b). The input current (for example, from a photodiode) enters its source. It presents a low impedance (≈ 1/g_m1) and passes the current to R_D1 with unity current gain.\n- **M₂** is a common-source stage with gain −g_m2R_D2.\n- **R_F** senses V_out and returns a current i_RF to the input node. This is shunt–shunt (voltage-sense, current-return) feedback, so the circuit is a **transimpedance amplifier (TIA)**.\n\n**Feedback polarity.** Follow a disturbance around the loop:\n\nV_out↑ → i_RF↑ → V_S↑ → I_D1↓ → V_X↑ → I_D2↑ → V_out↓\n\nThe feedback is therefore **negative**. The CG stage does not invert, so the CS stage supplies the inversion needed.\n\n## 2. Small-signal analysis\n\nAssumptions: λ = 0 and no body effect. To include body effect, replace g_m1 with g_m1 + g_mb1.\n\nLet i₁ be the signal current flowing up through M₁ (from S to X). The circuit equations are:\n\n- **CG stage:** v_S = i₁/g_m1 and v_X = R_D1·i₁\n- **KCL at S:** i₁ = I_in + i_RF\n- **KCL at the output:** v_out = −R_D2(g_m2·v_X + i_RF)\n- **Ohm's law across R_F:** v_out = v_S + R_F·i_RF\n\nSolving these gives the current through R_F:\n\n$$i_{RF}=-I_{in}\\,\\frac{g_{m2}R_{D1}R_{D2}+1/g_{m1}}{g_{m2}R_{D1}R_{D2}+1/g_{m1}+R_F+R_{D2}}$$\n\n**Loop gain.** Break the loop at the gate of M₂, with I_in open:\n- M₂'s current divides between R_D2 and the path R_F + 1/g_m1.\n- The part entering R_F flows through M₁ into R_D1.\n\n$$T=g_{m2}R_{D1}\\frac{R_{D2}}{R_{D2}+R_F+1/g_{m1}}=\\frac{g_{m1}g_{m2}R_{D1}R_{D2}}{1+g_{m1}(R_F+R_{D2})}$$\n\n**Transimpedance gain:**\n\n$$\\frac{V_{out}}{I_{in}}=-\\frac{R_{D2}\\,(g_{m1}g_{m2}R_{D1}R_F-1)}{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n=-R_F\\frac{T}{1+T}+\\frac{1}{1+T}\\,\\frac{R_{D2}}{1+g_{m1}(R_F+R_{D2})}\\;\\approx\\;-R_F$$\n\nThe second term is the small direct feedthrough of I_in through R_F into R_D2.\n\n**Input resistance** (lowered by the loop):\n\n$$R_{in}=\\frac{(1/g_{m1})\\,\\|\\,(R_F+R_{D2})}{1+T}\\approx\\frac{R_F+R_{D2}}{g_{m1}g_{m2}R_{D1}R_{D2}}$$\n\n**Output resistance** (also lowered by the loop):\n\n$$R_{out}=\\frac{R_{D2}\\,\\|\\,(R_F+1/g_{m1})}{1+T}=R_{D2}\\,\\Big\\|\\,\\frac{R_F+1/g_{m1}}{1+g_{m2}R_{D1}}$$\n\n**Example.** With g_m1 = g_m2 = 10 mS and R_D1 = R_D2 = R_F = 2 kΩ (bias constraints ignored):\n- T ≈ 9.8\n- V_out/I_in ≈ −1.81 kΩ, versus the ideal −2 kΩ\n- R_in ≈ 9 Ω, versus 100 Ω for a bare CG stage\n- R_out ≈ 95 Ω\n\n## 3. Intuition: the role of i_RF\n\nWhen T ≫ 1, M₁ carries only a tiny error current, i₁ ≈ I_in/(1+T). So v_S ≈ 0 and v_X ≈ 0, and both nodes act as virtual grounds.\n\nAs a result, i_RF ≈ −I_in: essentially all of the input current is forced through R_F, which gives V_out ≈ −R_F·I_in.\n\nThe CG device's role is to:\n- isolate the large input (photodiode) capacitance from R_D1, and\n- provide a low open-loop R_in, which the loop then reduces by a further factor of 1 + T.\n\n## 4. Noise (input-referred current)\n\n$$\\overline{i_{n,in}^2}\\approx\\frac{4kT}{R_F}+\\frac{4kT}{R_{D1}}+\\frac{4kT\\gamma}{g_{m1}R_F^2}+\\frac{4kT\\gamma g_{m2}+4kT/R_{D2}}{(g_{m2}R_{D1})^2}$$\n\n**R_D1's noise is not suppressed by the feedback.** Because v_X ≈ 0, R_D1's noise current cannot flow in R_D1 itself:\n- It must be absorbed by M₁.\n- That current must then flow through R_F (i_RF ≈ −i_n,RD1).\n- It therefore looks exactly like an input current.\n\nThis means R_D1 must be made comparable to or larger than R_F, which costs voltage headroom (I_D1R_D1) and lowers the pole at X. This is the classic limitation of CG TIAs.\n\nBy contrast:\n- M₁'s own noise is attenuated by g_m1R_F.\n- The noise of M₂ and R_D2 is attenuated by g_m2R_D1.\n\n## 5. Practical remarks\n\n- **Biasing.** As drawn, M₁'s bias current (plus any DC photocurrent) can only flow through R_F into M₂, so V_S = V_out + I_D1R_F.\n  - Keeping both transistors saturated requires I_D1R_F ≲ V_TH2 − V_ov1, which is very restrictive.\n  - In practice, a current source from S to ground supplies I_D1. It adds its own noise directly at the input.\n- **Limited loop gain.** T < g_m2R_D1, and T ≈ g_m2R_D1R_D2/R_F when R_F ≫ R_D2. Raising R_F for more gain and less noise therefore weakens the loop.\n- **Frequency response.** The loop contains three poles, so peaking and stability must be checked:\n  - node S, loaded by the photodiode capacitance, with a resistance of about 1/g_m1;\n  - node X, with R_D1 and C_GS2 plus the Miller-multiplied C_GD2;\n  - the output node.",
        "format": "markdown",
        "sha256": "ed7c1f995b5dfee7776afc3034b8a56124e35543875375927aed06a6317741e5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a transimpedance amplifier with negative feedback. This satisfies the full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2517,
        "output_tokens": 49954,
        "total_tokens": 52471,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2517,
        "output_tokens": 49954,
        "total_tokens": 52471,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Common-Gate / Common-Source TIA with Shunt Feedback\n\n## 1. What the circuit is\n\n- **M₁ (common gate):** The input current is injected at its source, and its gate is at V_b (AC ground). It presents a low resistance of about 1/g_m1. It acts as a **current buffer**: the small-signal current entering its source leaves its drain into R_D1.\n- **R_D1:** Converts that current into a voltage at node X.\n- **M₂ / R_D2 (common source):** The voltage-gain stage.\n- **R_F:** Senses V_out and returns a current i_RF to the input node. This is **shunt–shunt (voltage-sense, current-return) feedback**, so the circuit is a **transimpedance amplifier**, for example a photodiode front end.\n\n**Feedback polarity:**\n\nI_in↑ → v_in↑ → I_D1↓ → V_X↑ → I_D2↑ → V_out↓ → i_RF↓\n\nThe returned current opposes I_in, so the feedback is **negative**. We therefore expect V_out/I_in ≈ −R_F.\n\n## 2. Small-signal analysis\n\nAssumptions: λ = γ = 0, low frequency. Let v_in be the voltage at the input node (the source of M₁), and use i_RF as defined in the figure.\n\n1. The current entering M₁'s source is I_in + i_RF. Therefore:\n - v_in = (I_in + i_RF)/g_m1\n - v_X = R_D1 (I_in + i_RF)\n2. KCL at the output gives V_out = −R_D2 (g_m2 v_X + i_RF).\n3. Ohm's law for the feedback resistor gives R_F i_RF = V_out − v_in.\n\nEliminating the node voltages:\n\n$$\ni_{RF}\\Big(\\tfrac{1}{g_{m1}}+R_F+R_{D2}+g_{m2}R_{D1}R_{D2}\\Big) = -I_{in}\\Big(\\tfrac{1}{g_{m1}}+g_{m2}R_{D1}R_{D2}\\Big)\n$$\n\nDefine Σ = 1/g_m1 + R_F + R_D2 + g_m2R_D1R_D2. The results are:\n\n**Transimpedance**\n\n$$\n\\frac{V_{out}}{I_{in}}=-\\frac{R_{D2}\\,(g_{m2}R_{D1}R_F-1/g_{m1})}{\\Sigma}\n=-\\frac{R_{D2}\\,(g_{m1}g_{m2}R_{D1}R_F-1)}{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n$$\n\n**Input resistance**\n\n$$\nR_{in}=\\frac{R_F+R_{D2}}{g_{m1}\\Sigma}\n$$\n\n**Output resistance** (with I_in open)\n\n$$\nR_{out}=\\frac{R_{D2}\\,(R_F+1/g_{m1})}{\\Sigma}\n$$\n\n## 3. Loop gain and interpretation\n\nBreak the loop at the gate of M₂. The current g_m2v_X divides between R_D2 and the path R_F + 1/g_m1. The part entering M₁'s source is relayed, with current gain ≈ 1, into R_D1:\n\n$$\nT=g_{m2}R_{D1}\\,\\frac{R_{D2}}{R_{D2}+R_F+1/g_{m1}}=\\frac{g_{m1}g_{m2}R_{D1}R_{D2}}{1+g_{m1}(R_F+R_{D2})}\n$$\n\nT is nearly independent of g_m1. The CG stage adds current gain, not voltage gain, to the loop; the loop gain comes from g_m2R_D1.\n\n**Gain in asymptotic form**\n\n$$\n\\frac{V_{out}}{I_{in}}=-R_F\\frac{T}{1+T}+\\frac{1}{1+T}\\cdot\\frac{R_{D2}}{1+g_{m1}(R_F+R_{D2})}\n$$\n\nThe second term is direct feed-forward of I_in through R_F into R_D2. It is the origin of the \"−1\" in the numerator above.\n\n**Impedances**\n\nT vanishes if either port is shorted, so each impedance is its open-loop value divided by (1 + T):\n\n$$\nR_{in}=\\frac{(1/g_{m1})\\,\\|\\,(R_F+R_{D2})}{1+T}\\approx\\frac{1}{g_{m1}(1+T)},\\qquad\nR_{out}=R_{D2}\\,\\Big\\|\\,\\frac{R_F+1/g_{m1}}{1+g_{m2}R_{D1}}\n$$\n\n**Behavior for T ≫ 1**\n\n- V_out ≈ −R_F I_in, i_RF ≈ −I_in, and v_in ≈ 0.\n- Essentially all of I_in flows through R_F to the output. The input node is a virtual ground, and M₁ carries almost no signal current.\n- R_in is far below the 1/g_m1 of a bare CG stage, so a large input (photodiode) capacitance is well isolated.\n\n## 4. Design remarks\n\n- **Accuracy vs. R_F:** Closed-loop gain ≈ −R_F requires g_m2R_D1 ≫ 1 + (R_F + 1/g_m1)/R_D2. Raising R_F for more transimpedance lowers T.\n- **Biasing:** The input node has no other DC path, so M₁'s bias current must flow through R_F: I_D1 = I_RF + I_in,DC.\n - Since V_X = V_GS2, the bias current is fixed at I_D1 = (V_DD − V_GS2)/R_D1.\n - The DC node voltages are V_in = V_b − V_GS1 and V_out = V_in + R_F I_RF, and R_D2 carries I_D2 + I_RF.\n - The drop R_F·I_D1 must fit within the headroom. This couples g_m1, R_D1 and R_F.\n- **Noise:** At low frequency, the input-referred current noise is approximately\n\n $$\\overline{i_n^2}\\approx \\frac{4kT}{R_F}+\\frac{4kT}{R_{D1}}+\\frac{4kT\\gamma}{g_{m2}R_{D1}^2}+\\frac{4kT\\gamma}{g_{m1}R_F^2}$$\n\n - R_D1's noise enters node X exactly like the signal, because M₁ is a current buffer. So R_D1 should be at least as large as R_F.\n - M₁'s own noise is small because its source sees a large resistance (≈ R_F).\n- **Stability:** Three nodes lie in the loop:\n - the input node, with C_in and a pole near g_m1/C_in;\n - node X, which carries the Miller-multiplied C_GD2;\n - the output node.\n\n This makes it a three-pole loop, so the phase margin must be checked.\n- **Second-order effects:**\n - To include r_o1 and body effect, replace 1/g_m1 with (r_o1 + R_D1)/[1 + (g_m1 + g_mb1) r_o1].\n - To include r_o2, replace R_D2 with R_D2 ∥ r_o2.",
        "format": "markdown",
        "sha256": "0a24fe5c4d67f8d497c4415f38157c54a7417527e4bf412d1fec11fee6074ae6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from Vout to the input node forming a transimpedance amplifier, satisfying the full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2517,
        "output_tokens": 50941,
        "total_tokens": 53458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2517,
        "output_tokens": 50941,
        "total_tokens": 53458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the CG–CS Transimpedance Amplifier with Resistive Feedback\n\n## 1. What the circuit is\n\nThe circuit is a **transimpedance amplifier (TIA)**. It converts the input current I_in (for example, a photodiode current) into the voltage V_out. Call the input node, which is the source of M₁, node **S**.\n\n| Element | Function |\n|---|---|\n| M₁ (gate at V_b) | Common-gate input stage. It presents a low impedance (≈1/g_m1) to the input, has a current gain of about 1, and converts its current into V_X across R_D1. |\n| M₂, R_D2 | Common-source gain stage (inverting). |\n| R_F | Senses V_out and returns a current i_RF to node S. This is shunt–shunt (voltage-sense, current-return) feedback. |\n\n**Polarity check:**\nI_in↑ → V_S↑ → I_D1↓ → V_X↑ → I_D2↑ → V_out↓ → current is pulled out of S through R_F.\n\nThis opposes the original rise of V_S, so the feedback is negative. The CG stage is non-inverting and the CS stage is inverting.\n\n## 2. Small-signal analysis\n\nAssumptions: λ = 0. To include body effect, replace g_m1 with g_m1 + g_mb1.\n\nKCL equations:\n- **Node S:** I_in − g_m1·v_S + (v_out − v_S)/R_F = 0\n- **Node X:** v_X = g_m1·R_D1·v_S\n- **Output:** v_out/R_D2 + g_m2·v_X + (v_out − v_S)/R_F = 0\n\nDefine D = 1 + g_m1(R_F + R_D2) + g_m1·g_m2·R_D1·R_D2. Solving gives:\n\n$$\\frac{V_{out}}{I_{in}}=-\\frac{R_{D2}\\,(g_{m1}g_{m2}R_{D1}R_F-1)}{D},\\qquad R_{in}=\\frac{R_F+R_{D2}}{D},\\qquad R_{out}=\\frac{R_{D2}(1+g_{m1}R_F)}{D}$$\n\n**Loop gain** (break the loop at the gate of M₂):\n\n$$T=\\frac{g_{m1}g_{m2}R_{D1}R_{D2}}{1+g_{m1}(R_F+R_{D2})}\\approx\\frac{g_{m2}R_{D1}(R_{D2}\\parallel R_F)}{R_F}$$\n\nThe approximation means T is roughly the open-loop transimpedance divided by R_F. The current returned through R_F enters M₁'s low-impedance source and is delivered unchanged to R_D1.\n\n**The same results in feedback form:**\n\n$$\\frac{V_{out}}{I_{in}}=\\frac{-R_F\\,T+d}{1+T},\\quad d=\\frac{R_{D2}}{1+g_{m1}(R_F+R_{D2})}\\ \\text{(feedforward through } R_F)$$\n\n$$R_{in}=\\frac{(1/g_{m1})\\parallel(R_F+R_{D2})}{1+T},\\qquad R_{out}=\\frac{R_{D2}\\parallel(R_F+1/g_{m1})}{1+T}$$\n\n**For T ≫ 1** (requires g_m2·R_D1·(R_D2‖R_F) ≫ R_F):\n- V_out/I_in ≈ −R_F\n- R_in ≈ (R_F + R_D2)/(g_m1·g_m2·R_D1·R_D2), which is far below 1/g_m1\n- R_out ≈ R_F/(g_m2·R_D1)\n\n## 3. Physical picture: where does I_in go?\n\n- **V_X barely moves.** V_X is the input of the high-gain CS stage, so I_D1 = (V_DD − V_X)/R_D1 is nearly constant.\n- **The input current goes through R_F.** By KCL at S, almost all of I_in must flow through R_F, so i_RF ≈ −I_in.\n- **M₁ carries little signal.** Only about 1/T of the signal current flows through M₁, just enough to drive node X.\n- **Node S is a virtual ground**, and V_out ≈ −R_F·I_in.\n\nMore exactly, let A = −v_out/v_S ≈ g_m1·R_D1 · g_m2·(R_D2‖R_F). The input conductance is G_in = g_m1 + (1+A)/R_F, which is M₁ in parallel with a Miller-reduced R_F. This gives:\n\n$$\\frac{i_{RF}}{I_{in}}=-\\frac{1+A}{1+A+g_{m1}R_F},\\qquad \\frac{V_{out}}{I_{in}}=-\\frac{A\\,R_F}{1+A+g_{m1}R_F}$$\n\nThe extra g_m1·R_F term shows that M₁'s own input conductance steals current from R_F.\n\n## 4. DC bias: the main practical limitation\n\nM₁'s bias current has no path to ground except through R_F and M₂. So at DC the current in R_F flows from S to V_out, opposite to the drawn arrow:\n\n- V_S − V_out = (I_D1 + I_in)·R_F\n- V_X = V_DD − I_D1·R_D1 = V_GS2\n\nRequiring M₁ in saturation (V_X − V_S ≥ V_ov1) and M₂ in saturation (V_out ≥ V_ov2) gives:\n\n$$(I_{D1}+I_{in})\\,R_F\\;\\lesssim\\;V_{TH2}-V_{ov1}$$\n\n- **Only a few hundred mV can drop across R_F.** For example, g_m1 = 5 mS at V_ov1 = 0.2 V needs I_D1 = 0.5 mA. With R_F = 1 kΩ that drops 0.5 V, which already violates the condition.\n- **Consequences:**\n  - A large R_F, desirable for gain and low noise, forces a small I_D1 and therefore a small g_m1.\n  - The output sits just above V_ov2, so output swing is small.\n  - The CG gain g_m1·R_D1 = 2(V_DD − V_GS2)/V_ov1 is fixed by headroom.\n- **Usual fix:** add a current source from S to ground to carry I_D1. Its noise current then adds directly at the input.\n\n## 5. Bandwidth and stability\n\n- **Input pole.** If the amplifier is fast, Z_T(s) ≈ −R_F/(1 + s·R_in·C_in), where C_in = C_D + C_GS1 + C_SB1. The input pole rises from g_m1/C_in (plain CG TIA) to about (1+T)·g_m1/C_in.\n- **Stability.** The loop contains three poles: at S, at X (R_D1 with C_X, including the Miller capacitance of C_GD2), and at the output. A large T can cause peaking or instability. This limits the usable T and bandwidth.\n\n## 6. Noise (input-referred current)\n\n$$\\overline{i^2_{n,in}}\\approx\\frac{4kT}{R_F}+\\frac{4kT}{R_{D1}}+\\frac{4kT\\gamma}{g_{m1}}\\Big(\\frac{1}{R_F^2}+\\omega^2C_{in}^2\\Big)+\\frac{4kT\\gamma}{g_{m2}R_{D1}^2}+\\dots$$\n\n- **R_D1 appears directly.** The CG stage has unity current gain, so noise current at X is indistinguishable from signal, and feedback does not suppress it.\n- **M₁ acts like the amplifier's input noise voltage.** It is small at low frequency but grows with ω²·C_in².\n- **M₂ and R_D2 are suppressed** by roughly (g_m2·R_D1)².\n\n## Bottom line\n\n- The circuit is a shunt-feedback TIA built around a CG–CS core.\n- The gain is ≈ −R_F, set by a single resistor.\n- Input and output resistances are reduced by (1 + T).\n- Practical limits:\n  - R_F carries M₁'s bias current, which creates a severe headroom constraint.\n  - Three poles in the loop raise stability concerns.\n  - R_D1's noise refers directly to the input.",
        "format": "markdown",
        "sha256": "706ad984a4811956193747713d61f1714f74e02101d37d4f6a89282a6be062b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a negative-feedback transimpedance amplifier.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2517,
        "output_tokens": 54142,
        "total_tokens": 56659,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 51326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2517,
        "output_tokens": 54142,
        "total_tokens": 56659,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 51326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis: Common‑Gate Stage with Local Feedback (Current‑to‑Voltage Converter)\n\n**Notation:** X is the source of M1, which is also the drain of M2. The unlabeled bottom current source is $I_B$. Body effect is included through $g_1 \\equiv g_{m1}+g_{mb1}$.\n\n## 1. What the circuit is\n\n- **M1** has its gate at $V_b$, so it is a **common‑gate stage**. Its input is the source (X), its output is the drain ($V_{out}$), and its load is $I_1$.\n- **M2** senses $V_{out}$ and returns a current to X. This forms a local **shunt–shunt feedback loop**: it senses the output voltage and returns a current to the input.\n- The result is a **current‑to‑voltage (transimpedance) converter with a very low‑impedance input**. Topologically it is the (folded) flipped‑voltage‑follower, used here as a current sensor.\n\n**Feedback polarity:**\n1. $V_X\\uparrow$ reduces $V_{GS1}$, so M1 tries to conduct less than $I_1$.\n2. Therefore $V_{out}\\uparrow$.\n3. This reduces $|V_{GS2}|$, so M2 pushes less current into X.\n4. Therefore $V_X\\downarrow$. The feedback is **negative**.\n\n## 2. Large‑signal (bias) behavior\n\nThe gate of M2 draws no current, so $I_1$ can only flow through M1:\n\n$$I_{D1}=I_1 \\quad(\\text{independent of } I_{in})$$\n\nBecause M1's current is fixed, its $V_{GS1}$ is fixed, and the input node is pinned:\n\n$$V_X=V_b-V_{TH1}-\\sqrt{\\frac{2I_1}{\\mu_nC_{ox}(W/L)_1}}$$\n\nSo X acts as a large‑signal \"virtual ground.\"\n\nKCL at X gives $I_{D1}+I_{D2}+I_{in}=I_B$, so\n\n$$I_{D2}=I_B-I_1-I_{in}$$\n\nAll of the input current is absorbed by M2; none of it flows through M1. The output is therefore:\n\n$$V_{out}=V_{DD}-|V_{TH2}|-\\sqrt{\\frac{2(I_B-I_1-I_{in})}{\\mu_pC_{ox}(W/L)_2}}$$\n\n**Operating limits:**\n- **Input range:** $I_{in}<I_B-I_1$. Otherwise M2 turns off and the loop opens, so $I_B$ must exceed $I_1+I_{in,max}$.\n- **M1 saturation:** M1 needs $V_{out}\\ge V_b-V_{TH1}$.\n- **M2 saturation:** M2 is automatically saturated, because its drain ($V_X$) sits below its gate ($V_{out}$).\n- **Minimum supply:** $V_{DD,min}\\approx|V_{GS2}|+V_{DS,sat1}+V_{sat}(I_B)$. That is one threshold plus three overdrives, which makes the circuit low‑voltage friendly.\n\n## 3. Small‑signal analysis\n\n**(a) Intuition with λ = 0**\n\n- $I_1$ is ideal, so M1 carries no signal current: $i_{d1}=-g_{m1}v_X=0$. Hence $v_X=0$ and $R_{in}=0$.\n- KCL at X: $i_{in}+i_{d2}=0$, with $i_{d2}=-g_{m2}v_{out}$. This gives\n\n$$\\frac{v_{out}}{i_{in}}=\\frac{1}{g_{m2}}$$\n\nM1 acts as a very high‑gain amplifier: it senses X and drives M2's gate. M2 absorbs the input current. This is like an op‑amp transimpedance amplifier whose feedback element is the transconductor M2 instead of a resistor.\n\n**(b) With finite $r_o$**\n\nBreak the loop at M2's gate:\n- The impedance at X is $r_{o2}$. Looking into M1's source with an ideal current‑source load gives ∞.\n- The gain from X to $V_{out}$ is $1+g_1r_{o1}$.\n- The feedback factor is $\\beta=g_{m2}$.\n\nThis gives the loop gain:\n\n$$T=g_{m2}r_{o2}(1+g_1r_{o1})\\approx(g_{m1}r_{o1})(g_{m2}r_{o2})$$\n\nThe closed‑loop results are:\n\n| Quantity | Exact | Approximate |\n|---|---|---|\n| Transimpedance | $R_T=\\dfrac{r_{o2}(1+g_1r_{o1})}{1+T}=\\dfrac1{g_{m2}}\\Big\\Vert\\, r_{o2}(1+g_1r_{o1})$ | $\\dfrac{1}{g_{m2}}$ |\n| Input resistance | $R_{in}=\\dfrac{r_{o2}}{1+T}$ | $\\dfrac{1}{g_{m1}r_{o1}\\,g_{m2}}$ |\n| Output resistance | $R_{out}=\\dfrac{r_{o1}+r_{o2}+g_1r_{o1}r_{o2}}{1+T}$ | $\\dfrac{1}{g_{m2}}$ |\n\nHow to read these results:\n- **Input resistance** is about $g_mr_o$ times lower than the $1/g_{m1}$ of an ordinary CG stage. Without M2, a CG stage with an ideal current‑source load would have $R_{in}=\\infty$.\n- **Output side:** seen from $V_{out}$, the circuit is roughly a Norton source $i_{in}$ in parallel with $1/g_{m2}$. M2 behaves like a diode‑connected device whose drain is \"folded\" back to its gate through M1, while M1 holds M2's $V_{DS}$ constant.\n\n**Non‑ideal current sources:**\n- If $I_1$ has output resistance $r_1$, then $R_{in}\\approx1/[g_{m1}g_{m2}(r_{o1}\\Vert r_1)]$.\n- $R_T$ and $R_{out}$ remain approximately $1/g_{m2}$.\n- The loop gain drops to about $g_{m2}r_1$ unless $I_1$ is cascoded.\n\n## 4. Frequency response and stability\n\nDefine the node capacitances:\n- $C_X$: total capacitance at X (M1's source capacitances, M2's drain, $I_B$, and the signal source, e.g., a photodiode).\n- $C_Y$: total capacitance at $V_{out}$.\n\nAssume $g_mr_o\\gg1$ and neglect $C_{GD2}$. Then\n\n$$\\frac{V_{out}}{I_{in}}(s)\\approx\\frac{1/g_{m2}}{1+\\dfrac{sC_Y}{g_{m2}}+\\dfrac{s^2C_XC_Y}{g_{m1}g_{m2}}}$$\n\n**Loop poles:**\n- The dominant pole is at $V_{out}$, giving a loop crossover $\\omega_u\\approx g_{m2}/C_Y$.\n- The second pole is at X, at about $g_{m1}/C_X$.\n\n**Closed‑loop response:**\n\n$$\\omega_n=\\sqrt{\\frac{g_{m1}g_{m2}}{C_XC_Y}},\\qquad \\zeta=\\tfrac12\\sqrt{\\frac{g_{m1}/C_X}{g_{m2}/C_Y}}$$\n\n- **No peaking:** a flat response requires $g_{m1}/C_X\\gtrsim 2g_{m2}/C_Y$. The bandwidth is then about $\\sqrt2\\,g_{m2}/C_Y$.\n- **Large input capacitance** (e.g., a photodiode) causes ringing. Remedies: raise $I_1$ (larger $g_{m1}$), or add capacitance at $V_{out}$ (which costs bandwidth).\n- **Input impedance:** $Z_{in}\\approx \\frac1{g_{m1}}\\Big\\Vert\\left(\\frac{1}{g_{m1}r_{o1}g_{m2}}+s\\frac{C_Y}{g_{m1}g_{m2}}\\right)$.\n  - It is very small at DC.\n  - It becomes inductive above about $1/(r_{o1}C_Y)$.\n  - It approaches $1/g_{m1}$ at high frequency, where the loop gain is gone.\n  - This equivalent inductance resonating with $C_X$ is what produces the complex pole pair.\n\n## 5. Noise (low frequency)\n\n$$\\overline{i^2_{n,in}}\\approx4kT\\gamma\\,(g_{m2}+g_{m,I_1}+g_{m,I_B})+4kT\\gamma\\frac{\\omega^2C_X^2}{g_{m1}}$$\n\n- M2 and $I_B$ inject their noise directly at X.\n- $I_1$'s noise has no path except through M1 into X, so it also appears directly at the input.\n- M1 behaves like a cascode device: it contributes only through $C_X$, so its noise matters only at high frequency.\n\n## 6. Bottom line\n\n- **Input node:** held at a constant $V_b-V_{GS1}$, with $R_{in}\\approx1/(g_{m1}r_{o1}g_{m2})$.\n- **Transimpedance:** only $1/g_{m2}$, and it follows a square‑law (nonlinear) characteristic.\n- **Example:** with $g_m=1$ mS and $g_mr_o=20$, $R_T\\approx1$ kΩ and $R_{in}\\approx50$ Ω.\n\n**Typical use:** $V_{out}$ often drives a mirror device M3 to copy the current:\n\n$$I_{out}=\\frac{(W/L)_3}{(W/L)_2}(I_B-I_1-I_{in})$$\n\nIn this configuration:\n- The square‑law nonlinearity cancels in the mirrored current.\n- The mirror's input impedance is about $1/(g_{m1}r_{o1}g_{m2})$ instead of $1/g_m$.\n- M2's $V_{DS}$ is held fixed by M1, which helps matching with M3.",
        "format": "markdown",
        "sha256": "7a846c01c6c3ee00466cc3c8c9577d4613cc2d774fb7513df0cbceb28875bc43"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device and M2 as the Vout-driven feedback device returning current to the input node. It gives the low input resistance and the expected transimpedance and output resistance of approximately 1/gm2; the golden solution’s full-credit rule applies.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2366,
        "output_tokens": 64130,
        "total_tokens": 66496,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 60624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2366,
        "output_tokens": 64130,
        "total_tokens": 66496,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 60624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the M1/M2 Current-Input Feedback Circuit\n\n## Topology\n\n- **M1** is a common-gate NMOS. Its gate is at V_b. Its source (node X) is the input, its drain is V_out, and its load is I₁.\n- **M2** is a PMOS. Its gate senses V_out and its drain returns a current to X.\n- The lower current source, which I'll call **I_B**, biases node X.\n\nThe loop gives negative feedback:\n\nV_X↑ ⇒ V_GS1↓ ⇒ V_out↑ ⇒ |V_GS2|↓ ⇒ I_D2↓ ⇒ V_X↓\n\nThe loop senses a voltage (V_out) and returns a current (into X), so it is **shunt–shunt feedback**. This lowers both the input and output impedances and sets V_out/I_in ≈ 1/(feedback transconductance) = 1/g_m2. The cell is essentially a flipped-voltage-follower used as a current sensor.\n\n## 1. Large-signal (bias) behavior\n\n- **KCL at V_out:** M2's gate draws no current, so **I_D1 = I₁ regardless of I_in.**\n- **KCL at X:** **I_D2 = I_B − I₁ − I_in.**\n\nTwo consequences follow:\n\n$$V_X = V_b - V_{TH1} - \\sqrt{\\frac{2I_1}{\\mu_nC_{ox}(W/L)_1}}\\quad(\\text{independent of } I_{in})$$\n\n$$V_{out} = V_{DD} - |V_{TH2}| - \\sqrt{\\frac{2(I_B - I_1 - I_{in})}{\\mu_pC_{ox}(W/L)_2}}$$\n\n- Node X is a \"virtual ground\" whose DC level is set by V_b.\n- All of I_in is absorbed by M2, and V_out moves to whatever |V_GS2| that requires.\n\n**Operating limits:**\n- I_in < I_B − I₁. Otherwise M2 turns off and the loop opens.\n- M1 must stay saturated: V_out ≥ V_b − V_TH1. This limits how large I_D2 can get. M2 is then automatically saturated, since V_X < V_out.\n- Headroom sets the minimum supply: V_DD,min ≈ |V_GS2| + V_OD1 + V_Dsat(I_B), i.e., one V_GS plus two overdrives.\n\n## 2. Small-signal behavior\n\n**Intuition.** Since i_d1 = 0, v_gs1 = 0, so v_X ≈ 0. Any change in I_in must flow through M2, so g_m2·ΔV_out = ΔI_in.\n\n**Exact results** (ideal current sources, including r_O):\n\nFrom i_d1 = 0: v_out = (1 + g_m1 r_O1) v_X.\nFrom KCL at X: i_in = g_m2 v_out + v_X / r_O2.\n\nThe loop gain is\n\n$$T = g_{m2}r_{O2}(1+g_{m1}r_{O1}) \\approx (g_{m1}r_{O1})(g_{m2}r_{O2})$$\n\nThe closed-loop quantities are:\n\n$$\\frac{V_{out}}{I_{in}} = \\frac{1}{g_{m2}}\\frac{T}{1+T}\\approx\\frac{1}{g_{m2}}$$\n\n$$R_{in} = \\frac{r_{O2}}{1+T}\\approx\\frac{1}{g_{m1}r_{O1}\\,g_{m2}}$$\n\n$$R_{out} = \\frac{r_{O1}+r_{O2}+g_{m1}r_{O1}r_{O2}}{1+T}\\approx\\frac{1}{g_{m2}}$$\n\nEach result equals its open-loop value divided by (1+T). To include body effect, replace g_m1 with g_m1 + g_mb1.\n\n**Example:** with g_m = 2 mS and g_m r_O = 20:\n- T ≈ 420\n- V_out/I_in ≈ 500 Ω\n- R_in ≈ 24 Ω, about 20× lower than a diode-connected M2\n\nIf I₁ has a finite output resistance R₁:\n- V_out/I_in ≈ (1/g_m2) ∥ R₁\n- R_in ≈ 1/[g_m1 (r_O1 ∥ R₁) g_m2]\n\n## 3. Frequency response and stability\n\nBoth X and V_out are high-impedance nodes inside the loop, so the loop has two poles. Here C_X is the total capacitance at X (including the source's, e.g., a photodiode) and C_Y is the total capacitance at V_out.\n\n$$\\frac{V_{out}}{I_{in}}(s)\\approx\\frac{1/g_{m2}}{1+\\dfrac{sC_Y}{g_{m2}}+\\dfrac{s^2C_XC_Y}{g_{m1}g_{m2}}},\\qquad \\zeta=\\frac12\\sqrt{\\frac{g_{m1}/C_X}{g_{m2}/C_Y}}$$\n\n- The loop gain crosses unity near g_m2/C_Y.\n- The second pole is at g_m1/C_X.\n- A maximally flat response (ζ = 0.707, phase margin ≈ 65°) requires g_m1/C_X ≥ 2·g_m2/C_Y.\n\nEquivalently, the input impedance is inductive:\n\nZ_in ≈ (1/g_m1) ∥ (R₀ + sL), with R₀ = 1/(g_m1 r_O1 g_m2) and L = C_Y/(g_m1 g_m2)\n\n- Above roughly g_m2/C_Y, Z_in rises toward 1/g_m1.\n- A large C_X resonates with L and causes peaking.\n- The cure is a larger C_Y (which costs bandwidth) or a larger g_m1.\n\n## 4. Noise\n\nThe noise currents of M2, I₁ and I_B all appear directly at the input. I₁'s noise reaches the input because it must pass through M1 into X. The input-referred noise current is approximately\n\ni²ₙ ≈ 4kTγ(g_m2 + g_m,I1 + g_m,IB)\n\nM1 behaves like a cascode device. Its noise refers to the input as i_n1·(ωC_X/g_m1), which matters only at high frequency.\n\n## Bottom line\n\n- Node X is a very low-impedance input, about 1/(g_m1 r_O1 g_m2), held at V_b − V_GS1.\n- V_out is a low-impedance (≈1/g_m2) voltage that encodes I_D2 = I_B − I₁ − I_in.\n- The transimpedance is only about 1/g_m2 and follows a square-root law, so the circuit is a poor high-gain TIA.\n- It makes an excellent current sensor, or \"super diode.\" Add M3 with its gate at V_out and source at V_DD to get I_out = [(W/L)₃/(W/L)₂]·(I_B − I₁ − I_in).\n- That mirror has an extremely low input impedance and a constant V_DS2, which improves matching.",
        "format": "markdown",
        "sha256": "2538d73dae047804b1bc1dedc572970720b671f4c4877575059294efa6dbe9dc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS, M2 as the PMOS feedback device driven by Vout, and the feedback path to the input node. It also gives the required low input resistance and approximately 1/gm2 transimpedance; ancillary analysis does not change this core result.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2366,
        "output_tokens": 45043,
        "total_tokens": 47409,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2366,
        "output_tokens": 45043,
        "total_tokens": 47409,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Current-Input Common-Gate Stage with Shunt Feedback (M1, M2)\n\n## 1. What the circuit is\n\n- **M1** is an NMOS common-gate device. Its gate is at V_b, its source is the input node X, and its drain is V_out. The only load on V_out is the ideal source I₁, so the gain from X to V_out is very large.\n- **M2** is a PMOS common-source device. V_out drives its gate, and its drain current is returned to X.\n- The unlabeled source at X is a bias sink. I call it I_B.\n\nThe path X → M1 (non-inverting) → V_out → M2 (inverting) → X forms a **negative-feedback loop**. The loop senses the output voltage and returns a current to the input, so it is shunt–shunt feedback. This is the core of the flipped-voltage-follower / super-source-follower cell, driven here by a current at its low-impedance node. In effect it is a current-sensing (transimpedance) stage.\n\n## 2. Large-signal operation\n\nI₁ is ideal and the gate of M2 draws no current. So M1 always carries I_D1 = I₁, and with V_b fixed, V_GS1 is fixed:\n\n$$V_X = V_b - V_{TH1} - \\sqrt{\\frac{2I_1}{\\mu_nC_{ox}(W/L)_1}}\\qquad(\\text{independent of } I_{in})$$\n\nKCL at X gives |I_D2| = I_B − I₁ − I_in. Therefore:\n\n$$V_{out}=V_{DD}-|V_{TH2}|-\\sqrt{\\frac{2(I_B-I_1-I_{in})}{\\mu_pC_{ox}(W/L)_2}}$$\n\n**Intuition:** M1's current cannot change, so V_X cannot change. Every change in I_in must therefore be absorbed by M2.\n- If I_in rises, V_X tends to rise. M1 amplifies this, so V_out rises.\n- M2 then supplies less current until the extra input current is absorbed.\n\nV_out equals the gate voltage of a diode-connected M2 carrying I_B − I₁ − I_in, but the input node stays still. A PMOS tied to V_out would copy this current. That makes the circuit a low-input-impedance current mirror or current sensor.\n\n**Operating limits**\n- I_in < I_B − I₁. Beyond this, M2 cuts off, the loop opens, and V_out rises toward V_DD.\n- Negative I_in (current drawn out of X) can be large, because M2 supplies it. The limit is M1 entering triode, at V_out ≥ V_b − V_TH1.\n- M2 is always saturated, because V_X < V_out.\n- V_DD,min ≈ V_DS,min(I_B) + V_ov1 + V_SG2.\n\n## 3. Small-signal behavior at low frequency\n\n**Quick argument (r_o → ∞):** i_d1 = 0, so v_x = 0. Then g_m2·v_out = i_in, giving:\n\n$$\\frac{v_{out}}{i_{in}}\\approx\\frac{1}{g_{m2}}$$\n\n**With channel-length modulation:**\n- Open-loop transimpedance: (1 + g_m1·r_o1)·r_o2.\n- Feedback factor: g_m2.\n- Loop gain: T₀ = g_m2·r_o2·(1 + g_m1·r_o1) ≈ g_m1·r_o1·g_m2·r_o2.\n\nThe closed-loop results follow:\n\n$$R_T=\\frac{(1+g_{m1}r_{o1})r_{o2}}{1+g_{m2}r_{o2}(1+g_{m1}r_{o1})}\\approx\\frac{1}{g_{m2}}$$\n\n$$R_{in}=r_{o2}\\,\\Big\\|\\,\\frac{1}{g_{m2}(1+g_{m1}r_{o1})}\\approx\\frac{1}{g_{m1}r_{o1}\\,g_{m2}}$$\n\n$$R_{out}=\\frac{r_{o1}+(1+g_{m1}r_{o1})r_{o2}}{1+T_0}\\approx\\frac{1}{g_{m2}}$$\n\nHow to read these:\n- **Input impedance:** compare R_in with 1/g_m1 for a plain common-gate stage. Node X is effectively a virtual ground.\n- **Gain:** the transimpedance does not depend on M1, which acts only as the error amplifier.\n- **Output:** it looks like i_in driving 1/g_m2, i.e., unity current gain into an \"active diode.\"\n- **Linearity:** for large signals, R_T varies with I_in through g_m2(I_D2), following the square-root law above.\n\n**Real current source and body effect**\n- If I₁ has output resistance R₁:\n  - T₀ ≈ g_m2·(R₁ ∥ g_m1·r_o1·r_o2).\n  - R_T ≈ (1/g_m2) ∥ R₁.\n  - R_in ≈ 1/[g_m1·g_m2·(r_o1 ∥ R₁)].\n- If M1's body is tied to ground, replace g_m1 with g_m1 + g_mb1.\n\n## 4. Frequency response and stability\n\n**Node capacitances**\n- C_X = C_GS1 + C_SB1 + C_DB2 + the bias source + any source capacitance, such as a photodiode. This is often large.\n- C_Y = C_GS2 + C_DB1 + C_GD1 + the I₁ source + any load.\n\n**Transfer function (r_o → ∞, C_GD2 neglected)**\n\n$$\\frac{V_{out}}{I_{in}}(s)=\\frac{1/g_{m2}}{1+\\dfrac{C_Y}{g_{m2}}s+\\dfrac{C_XC_Y}{g_{m1}g_{m2}}s^2},\\qquad \\omega_n=\\sqrt{\\frac{g_{m1}g_{m2}}{C_XC_Y}},\\quad Q=\\sqrt{\\frac{g_{m2}C_X}{g_{m1}C_Y}}$$\n\n**Loop gain**\n\n$$T(s)=\\frac{g_{m2}}{sC_Y}\\cdot\\frac{1}{1+sC_X/g_{m1}}$$\n\n- The dominant pole is at V_out, with unity-gain frequency ω_u ≈ g_m2/C_Y.\n- The non-dominant pole is at X, at g_m1/C_X.\n- Phase margin ≈ 90° − tan⁻¹[(g_m2/C_Y)/(g_m1/C_X)].\n\n**No-peaking condition:** Q ≤ 1/√2 requires g_m1/C_X ≥ 2·g_m2/C_Y.\n- The bandwidth is then ≈ g_m2/C_Y.\n- The maximally flat bandwidth is g_m1/(√2·C_X).\n\n**Port impedances**\n\n$$Z_{in}=\\frac{1}{g_{m1}}\\;\\Big\\|\\;s\\frac{C_Y}{g_{m1}g_{m2}},\\qquad Z_{out}=\\frac{1}{g_{m2}}+s\\frac{C_X}{g_{m1}g_{m2}}$$\n\n- **Input:** inductive. It is nearly zero at low frequency and rises to 1/g_m1 above ω_u. Its resonance with C_X causes the peaking.\n- **Output:** behaves as a gyrator-type active inductor.\n\n**Remedies for peaking**\n- Add capacitance at V_out, lower g_m2, or raise g_m1.\n- C_GD2 helps as a Miller capacitor, raising the damping term to C_Y/g_m2 + C_GD2/g_m1.\n\n## 5. Noise (input-referred current)\n\n$$\\overline{i^2_{n,in}}=4kT\\gamma g_{m2}+\\overline{i^2_{n,I_B}}+\\overline{i^2_{n,I_1}}\\Big[1+\\Big(\\tfrac{\\omega C_X}{g_{m1}}\\Big)^2\\Big]+4kT\\gamma\\frac{(\\omega C_X)^2}{g_{m1}}$$\n\n- M2 and I_B sit directly in parallel with I_in, so they refer to the input one-to-one.\n- I₁'s noise is also one-to-one, because the loop forces it through M1 into X.\n- M1's noise matters only at high frequencies, through C_X.\n\nThis resembles a TIA with a feedback resistor of 1/g_m2, but with a γ penalty plus the current-source noise.\n\n**Summary:** the circuit holds its input at V_b − V_GS1 with a very low impedance of about 1/(g_m1·r_o1·g_m2). It converts the input current to V_out ≈ I_in/g_m2 with an output impedance of about 1/g_m2. It is a second-order system that needs g_m1/C_X ≳ 2·g_m2/C_Y for good phase margin.",
        "format": "markdown",
        "sha256": "d373b486f521ec01b6cef8c3fbc632234f7352d733d5a6c9415cfde24e2819c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS input device and M2 as the PMOS feedback device driven by Vout, traces feedback to the input node, and gives the very low input resistance and approximately 1/gm2 transimpedance/output resistance.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2366,
        "output_tokens": 49171,
        "total_tokens": 51537,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 46122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2366,
        "output_tokens": 49171,
        "total_tokens": 51537,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 46122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# No. The circuit keeps oscillating, only more slowly.\n\n## Small-signal view\n\nModel each inverter as a transconductance $G_m = g_{mn}+g_{mp}$ driving $R_{out} = r_{on}\\parallel r_{op}$ and $C_L$:\n\n$$\nH(s) = \\frac{-A_0}{1+s/\\omega_0},\\qquad A_0 = G_mR_{out},\\qquad \\omega_0=\\frac{1}{R_{out}C_L}\n$$\n\nThe loop transmission is $H^3(s)$. The three inversions supply 180° of the required 360°, so the three poles must supply the other 180°, or 60° each:\n\n$$\n\\tan^{-1}\\frac{\\omega_{osc}}{\\omega_0}=60^\\circ \\;\\Rightarrow\\; \\omega_{osc}=\\sqrt3\\,\\omega_0\n$$\n\nAt that frequency each stage's gain is\n\n$$\n\\frac{A_0}{\\sqrt{1+3}} = \\frac{A_0}{2},\n$$\n\nso the start-up condition is $A_0 \\ge 2$.\n\n$C_L$ appears only in $\\omega_0$. A larger $C_L$ moves the poles down, and the oscillation frequency moves down with them. The gain at the oscillation frequency stays at $A_0/2$ per stage, because $A_0$ does not depend on $C_L$. So the Barkhausen conditions remain satisfied for any $C_L$, and only $f_{osc} \\propto 1/C_L$ changes.\n\nThe common mistake is to assume the large capacitors \"kill the gain.\" That would happen only if the frequency were held fixed, and in a ring oscillator it is not.\n\n## Large-signal view (time scaling)\n\nEach node obeys\n\n$$\nC_L\\frac{dV_k}{dt} = I_{inv}(V_{k-1},V_k)\n$$\n\nwhere $I_{inv}$ is the inverter's nonlinear output current. Substitute $t' = t/C_L$ and $C_L$ disappears from the equations entirely. The solution therefore has:\n\n- the same waveforms and the same rail-to-rail swing,\n- simply stretched in time by a factor proportional to $C_L$ ($T = 6t_d$, with $t_d \\propto C_LV_{DD}/I$).\n\nThe period adjusts itself to the delays. No external clock limits how long each capacitor has to charge, so the capacitors always reach full swing. The inverters' own parasitic capacitances become negligible relative to $C_L$, so the circuit approaches this ideal scaled behavior even more closely.\n\n## Practical caveat\n\nOnly resistive loading or reduced gain could stop the oscillation, not the capacitance itself. For example, very large real capacitors may have significant leakage. That places a resistance in parallel with $R_{out}$, which lowers $A_0$ and could push it below 2. With ideal capacitors, the ring oscillates for arbitrarily large $C_L$, with frequency approaching zero.",
        "format": "markdown",
        "sha256": "f035ece114de0257189de0b489f0301cdfa11b56f474d51736121bf351705eab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal large capacitors slow the ring without stopping oscillation. The small-signal phase and gain analysis correctly shows the oscillation frequency scales with 1/CL while the gain condition is unchanged.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2400,
        "output_tokens": 6153,
        "total_tokens": 8553,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5151,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2400,
        "output_tokens": 6153,
        "total_tokens": 8553,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5151,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# No. It still oscillates, just more slowly.\n\nLarger capacitors lower the frequency of oscillation, but they do not change the condition for oscillation to start.\n\n## Small-signal view\n\nModel each inverter as a gain stage with low-frequency gain $A_0 = g_mR_{out}$ and a pole at $\\omega_0 = 1/(R_{out}C_L)$:\n\n$$\nH(s) = \\frac{-A_0^3}{\\left(1+\\dfrac{s}{\\omega_0}\\right)^3}\n$$\n\nThe Barkhausen criteria give two conditions:\n\n- **Phase:** the three poles must together supply 180°, so each supplies 60°:\n$$\\tan^{-1}\\frac{\\omega_{osc}}{\\omega_0}=60^\\circ \\;\\Rightarrow\\; \\omega_{osc}=\\sqrt{3}\\,\\omega_0=\\frac{\\sqrt{3}}{R_{out}C_L}$$\n\n- **Magnitude:**\n$$\\frac{A_0^3}{\\left[1+(\\omega_{osc}/\\omega_0)^2\\right]^{3/2}}=\\frac{A_0^3}{8}\\ge 1 \\;\\Rightarrow\\; A_0\\ge 2$$\n\n$C_L$ does not appear in the start-up condition. As $C_L$ grows, the poles move down, and the oscillation frequency moves down with them. At the new frequency, each stage still provides 60° of phase shift and still has gain $A_0/2$.\n\nThe intuition that \"big capacitors kill the gain\" holds only at a fixed frequency. A ring oscillator has no fixed frequency. It settles wherever the loop phase is correct, and that point always scales with $1/(R_{out}C_L)$.\n\n## Large-signal (time-scaling) view\n\nEach node obeys\n\n$$C_L\\frac{dV_k}{dt} = I_{inv}(V_{k-1},V_k)$$\n\nMultiplying all three capacitors by a factor $\\alpha$ is equivalent to replacing $t$ with $t/\\alpha$. The waveforms have the same shape and the same rail-to-rail amplitude, but the period is $\\alpha$ times longer. Equivalently, the stage delay $T_D \\propto C_L$ and $f_{osc} = 1/(6T_D)$.\n\nThe equilibrium where every node sits at the inverter trip point stays unstable for any $C_L$. Its linearized eigenvalues simply scale by $1/\\alpha$ without changing sign.\n\nLarger $C_L$ actually makes the single-pole model more accurate. The inverters' own parasitic poles become relatively farther away and add less excess phase.\n\n**Conclusion:** the circuit keeps oscillating for arbitrarily large $C_L$, with $f_{osc}\\propto 1/C_L$. With ideal capacitors, nothing stops it. Only non-ideal effects that don't scale with $C_L$ could, such as leakage in huge real capacitors pulling the stage gain below 2.",
        "format": "markdown",
        "sha256": "346a008cd9b188b6fc2cb886c8d68ae2a1c1b8b100fb1b153d06891a5e69945b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors slow the ring without stopping oscillation, and supports this with the correct phase and gain conditions and a time-scaling argument.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2400,
        "output_tokens": 6009,
        "total_tokens": 8409,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4999,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2400,
        "output_tokens": 6009,
        "total_tokens": 8409,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4999,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No.** Making the capacitors larger only slows the ring down. It keeps oscillating, at a frequency roughly proportional to 1/C_L, and only stops in the limit C_L → ∞.\n\n**Small-signal view**\n\nModel each inverter as a transconductance G_m with output resistance R_out. Each stage then has\n\n$$H(s) = \\frac{-A_0}{1+s/\\omega_0},\\qquad A_0 = G_mR_{out},\\quad \\omega_0=\\frac{1}{R_{out}C_L}$$\n\n- **Phase condition:** the three inversions give 180°. The three poles must supply the other 180°, so 60° each. That gives ω_osc = √3·ω₀ = √3/(R_out·C_L).\n- **Gain condition:** at that frequency each stage's gain is A₀/√(1+3) = A₀/2. Oscillation requires A₀ ≥ 2.\n\nC_L does not appear in the start-up condition. A larger C_L lowers the pole frequency, and the oscillation frequency drops with it. At the new, lower frequency each stage still delivers a gain of A₀/2 with 60° of phase shift. CMOS inverters easily have A₀ > 2 near their trip point.\n\nThe closed-loop poles show the same thing:\n\n$$s=\\omega_0\\left[-1+\\tfrac{A_0}{2}\\pm j\\tfrac{\\sqrt3}{2}A_0\\right]$$\n\nAs C_L grows, these poles slide toward the origin along fixed rays. They stay in the right half-plane for any finite C_L.\n\n**Large-signal view (time scaling)**\n\nEach node obeys C_L·dV_k/dt = I_inv(V_(k−1), V_k). Substituting t = C_L·τ removes C_L from the equations entirely. So the waveform for any C_L is the same waveform stretched in time:\n\n- the swing is still rail to rail;\n- the stage delay t_d grows in proportion to C_L;\n- the frequency f = 1/(6t_d) falls as 1/C_L.\n\nLarge C_L actually makes the inverters' own parasitic capacitances negligible, so this ideal behavior becomes more accurate, not less.\n\n**Why the intuition fails**\n\nThe tempting argument is that a huge capacitor shorts each node and drives the loop gain below 1. That would be true at a fixed frequency. But a ring oscillator has no fixed frequency: it runs wherever the loop phase reaches 360°, and that point scales with 1/C_L.\n\nIn practice, very slow edges bring more short-circuit current and more jitter, but they do not stop the oscillation.",
        "format": "markdown",
        "sha256": "8334b11aca5b2456f28aeee23c37906358cf549836a46c4bc991d863c7c64c18"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency. Both the small-signal phase/gain analysis and the time-scaling delay argument support that increasing all three capacitances lowers frequency without changing the oscillation condition.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2400,
        "output_tokens": 6984,
        "total_tokens": 9384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6111,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2400,
        "output_tokens": 6984,
        "total_tokens": 9384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6111,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Phase noise falls by about 6 dB at a given offset, but only because the frequency halves\n\nThe inverters are unchanged, so the circuit simply runs twice as slowly.\n\n**1. Frequency halves.**\nEach stage delay is roughly t_d ≈ C_L·V_DD/I. The inverter currents are unchanged, so t_d doubles and f₀ = 1/(6t_d) halves. This assumes C_L dominates the node capacitance.\n\n**2. Power stays the same.**\nP = 3·C_L·V_DD²·f₀, so (2C_L)(f₀/2) gives the same P.\n\nThe circuit is just a time-scaled version of the original. The voltage and current waveforms are the same, only stretched by 2, so the average supply current is unchanged. The short-circuit current is included in this: it flows twice as long per transition, but transitions happen half as often.\n\n**3. Phase noise drops by a factor of 4.**\nFor a ring oscillator, L(Δf) ∝ (kT/P)·(f₀/Δf)². With P constant and f₀ halved, L(Δf) falls by 4, which is 6 dB.\n\n**Jitter view (intuition)**\n\n- **Per-stage jitter grows.** Each noise current acts over a transition that is twice as long, so the noise charge variance doubles. That charge sits on 2C_L, which halves the noise voltage variance. But the slew rate I/C is also halved. The net result is that timing jitter variance per stage ∝ C, so it doubles.\n- **Accumulation rate is unchanged.** The period jitter variance σ_T² doubles, but the period T also doubles. So κ² = σ_T²/T, the rate at which jitter accumulates per unit time, stays the same.\n- **The same timing error means less phase error.** Phase error = 2πf₀ × timing error. With f₀ halved, the phase-error variance falls by 4, which is 6 dB.\n\nThe flicker-noise (1/f³) region shifts down by 6 dB as well, because the fractional frequency fluctuations are unchanged. The 1/f³ corner frequency stays the same.\n\n**There is no real improvement**\n\nThe result is exactly what you would get by following the original ring with an ideal ÷2 circuit. At the same relative offset, Δf/f₀, the phase noise is unchanged, and the figure of merit (FOM) is the same.\n\nTo get the original frequency back, you would also have to double the transistor widths. That doubles the power, and the phase noise ends up only 3 dB better than the original circuit. This is the usual L ∝ 1/P trade-off.\n\nIf parasitic capacitances are significant, f₀ drops by less than 2. The improvement is then less than 6 dB: 20·log of the frequency ratio.",
        "format": "markdown",
        "sha256": "c7713236e33f14f34272e82c9b5b0df39314c81b35ee5431a0b14ebd6f8898d4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling the capacitors halves the oscillation frequency, giving about 6 dB lower phase noise at a fixed offset; it also correctly notes that phase noise is unchanged at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2392,
        "output_tokens": 14449,
        "total_tokens": 16841,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2392,
        "output_tokens": 14449,
        "total_tokens": 16841,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Doubling the capacitors: phase noise falls by 6 dB, but only because the frequency halves\n\nThe inverters are unchanged, so each node is charged and discharged by the same current waveforms, just more slowly.\n\n**Frequency and power**\n\n- The stage delay t_d ≈ C_L·V_DD/(2I_D) doubles, so f₀ = 1/(6t_d) **halves**.\n- The power stays the same:\n\n$$P = 3C_LV_{DD}^2f_0 \\approx V_{DD}I_D$$\n\nDoubling C_L while halving f₀ leaves P unchanged. Physically, the supply-current waveform has the same amplitude and is just stretched in time.\n\n**Phase noise**\n\nFor an inverter-based ring, the phase noise is set by power and frequency:\n\n$$\\mathcal{L}(\\Delta f)\\;\\propto\\;\\frac{kT}{P}\\left(\\frac{f_0}{\\Delta f}\\right)^2$$\n\nThe remaining factors depend only on γ, V_DD and V_TH, not on C_L. With P fixed and f₀ halved, the phase noise at a given offset **drops by 4×, i.e., 6 dB**.\n\n**Why this is not a real improvement**\n\nLook at the jitter. The noise voltage on each node falls (∝ kT/C), but the slew rate also halves (∝ I/C). So the timing-jitter variance per transition doubles:\n\n$$\\sigma_{t,stage}^2 \\propto \\frac{kT/C}{(I/C)^2} \\propto C$$\n\nSince there are half as many transitions per second, jitter accumulates at the same rate per unit time. The constant κ, defined by σ_Δt = κ√Δt, is unchanged. Then:\n\n$$\\mathcal{L}(\\Delta f)=\\frac{f_0^2\\kappa^2}{\\Delta f^2}$$\n\nThis drops by 6 dB only because f₀ is halved. That is exactly what you'd get by following the original ring with an ideal ÷2 frequency divider.\n\n**Bottom line**\n\n- The phase noise relative to the carrier (same Δf/f₀) and the figure of merit are unchanged.\n- To get the original frequency back, you must also double all transistor widths, which doubles the power. The net result is then the familiar 3 dB improvement at the original f₀.\n- For a ring oscillator, phase noise can only be bought with power.",
        "format": "markdown",
        "sha256": "922e9900a5a7b744ad075aaf220a32b52d6a9b90881a5668b8e83a6983ee4b76"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by about 6 dB at a fixed offset; it also correctly notes that phase noise is unchanged at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2392,
        "output_tokens": 12831,
        "total_tokens": 15223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2392,
        "output_tokens": 12831,
        "total_tokens": 15223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Effect of Doubling the Capacitors on Ring Oscillator Phase Noise\n\n**Short answer:** At a given offset frequency, the phase noise falls by about 6 dB. This is not a real improvement, though. The oscillation frequency is halved, the power is unchanged, and the phase noise normalized to the carrier (the FOM) stays the same.\n\n## Why\n\n**1. The frequency halves.** Each stage delay is t_d ≈ C_L·V_DD/(2I). Doubling C_L doubles t_d, so f₀ = 1/(6t_d) drops by a factor of 2.\n\n**2. The power stays the same.**\nP = 3·C_L·V_DD²·f₀ → 3·(2C_L)·V_DD²·(f₀/2) = P\n\n**3. The phase noise drops by 6 dB at a fixed offset.** For an inverter-based ring,\n\nL(Δf) ≈ α·(kT/P)·(f₀/Δf)²\n\nwhere α is a constant of order a few. With P fixed and f₀ halved, L falls by a factor of 4, or 6 dB.\n\n## Jitter intuition\n\n- In each transition, the transistor noise current is integrated on C_L for a time t_d. The resulting noise voltage variance scales as t_d/C_L², which is proportional to 1/C_L. This kT/C-like noise therefore decreases.\n- However, the slew rate I/C_L is halved. The timing error is σ_t = σ_V/(I/C_L), which scales as √C_L. So the jitter variance per period doubles.\n- The period also doubles. The jitter accumulation constant κ (defined by σ²_ΔT = κ²·ΔT) is therefore unchanged.\n- Since L(Δf) ≈ κ²·f₀²/Δf², L drops by 6 dB only because f₀ is lower.\n\nThe impulse sensitivity function (ISF) view agrees:\n- q_max = C_L·V_DD doubles.\n- The noise currents are unchanged.\n- Γ_rms is unchanged, because transition times and the period scale together.\n- L scales as 1/q_max², giving −6 dB.\n\n## Interpretation\n\nDoubling C_L is equivalent to keeping the original ring and dividing its output by 2. That also gives \"free\" 6 dB lower phase noise at the same power. The FOM, defined as L − 20 log(f₀/Δf) + 10 log(P/1 mW), is unchanged.\n\nTo get a real improvement at the original frequency, you must also double the transistor widths. That restores f₀ but doubles the power, and the phase noise improves by only 3 dB. A ring oscillator's phase noise is fundamentally traded against power, not capacitance.",
        "format": "markdown",
        "sha256": "19e0a5ed25c5b2ad4a20b5e1b566ddea8dd54363c26c2e65ee8823bc88d9116c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about 6 dB at a fixed offset, with supporting reasoning consistent with the golden solution.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2392,
        "output_tokens": 11854,
        "total_tokens": 14246,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2392,
        "output_tokens": 11854,
        "total_tokens": 14246,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** Because real inverters have finite gain, a large enough C_L stops the oscillation. The ring then settles with all nodes at the inverter trip point, V_M ≈ V_DD/2.\n\n## Small-signal view\n\nCall the C_L node X and the other two nodes Y and Z. Model each inverter as a gain −A₀ = −g_mR with a pole at its output:\n\n- Nodes Y and Z (capacitance C) have a pole at ω₀ = 1/RC.\n- Node X has a pole at ω_X = 1/RC_L.\n\nThe loop gain is\n\n$$H(s) = \\frac{-A_0^3}{(1+s/\\omega_X)(1+s/\\omega_0)^2}$$\n\nTo oscillate, the three poles must produce 180° of phase shift at a frequency where |H| ≥ 1.\n\n- As C_L grows, ω_X → 0. That pole alone contributes about 90° at all relevant frequencies.\n- The other two poles must supply the remaining 90°, or 45° each. So the 180° frequency approaches ω₀ (exactly, ω² = ω₀² + 2ω₀ω_X). It does **not** keep falling with C_L.\n- At that frequency, |H| ≈ A₀³ / [2(ω₀/ω_X)] = A₀³C / (2C_L), which drops as 1/C_L.\n\nThe Routh–Hurwitz criterion gives the exact condition for oscillation:\n\n$$A_0^3 > 4 + 2\\left(\\frac{C_L}{C} + \\frac{C}{C_L}\\right)$$\n\nFor C_L = C, this reduces to the familiar A₀ > 2. Oscillation therefore ceases once C_L ≳ (A₀³/2)·C, for example about 60C if A₀ = 5.\n\nIn effect, C_L acts as a dominant-pole compensation capacitor. The ring becomes a well-compensated three-stage amplifier in unity-gain negative feedback, which is stable. It behaves like a single inverter with its input tied to its output, sitting at V_M.\n\n## Time-domain intuition\n\n- Node X slews slowly (≈ I/C_L), while the fast second and third stages follow it almost instantly.\n- As soon as X crosses V_M, Z flips after just two short gate delays and reverses the current into C_L.\n- So X can overshoot V_M only by about (I/C_L)·2t_d, which shrinks as C_L grows.\n- Once that excursion is too small to be regenerated into full swings by the finite gain of the next two inverters, the disturbance decays each cycle. The circuit comes to rest at V_M.\n\nWith ideal, infinite-gain inverters it would keep oscillating, with an ever-smaller swing at X. Finite gain is what kills it.\n\n## Intermediate range\n\nFor C ≪ C_L < ~A₀³C/2, the ring still oscillates. Increasing C_L mainly shrinks the swing at X rather than lowering the frequency in proportion to C_L. Beyond that range, oscillation stops altogether.",
        "format": "markdown",
        "sha256": "910ab7b05510b599b0302a5e47d766ce16ed02bde56225a227e055bd344abdfe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large capacitance on one node stops oscillation and explains the dominant-pole loop-gain loss. The additional phase, threshold, and time-domain details are consistent with the essential result.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2292,
        "output_tokens": 19631,
        "total_tokens": 21923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18613,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2292,
        "output_tokens": 19631,
        "total_tokens": 21923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18613,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** If C_L is made large enough, the ring stops oscillating. It settles with all three nodes at the inverter trip point, V_M ≈ V_DD/2, and static crowbar current flows. It does not simply oscillate more and more slowly.\n\n### Small-signal view\n\nModel each inverter near V_M as a gain of –A₀ (A₀ = g_m·R) with output resistance R. The two unloaded nodes have capacitance C, and the loaded node has C + C_L. The loop gain is\n\n$$\nH(s)=\\frac{-A_0^3}{(1+s/\\omega_L)(1+s/\\omega_p)^2},\\qquad \n\\omega_p=\\frac{1}{RC},\\quad \\omega_L=\\frac{1}{R(C+C_L)}\n$$\n\nFor oscillation, the three poles must together supply 180° of phase shift with |H| ≥ 1 at that frequency.\n\n- **Oscillation frequency:** Setting the imaginary part of the characteristic equation to zero gives ω_osc² = ω_p² + 2ω_pω_L.\n- **Large C_L limit:** The loaded pole already contributes about 90°. The other two poles must supply about 45° each, so ω_osc ≈ ω_p.\n- **Loop gain at that frequency:**\n\n$$\n|H| = \\frac{A_0^3\\,k}{2(1+k)^2}\\approx \\frac{A_0^3}{2}\\frac{\\omega_L}{\\omega_p},\\qquad k=\\frac{\\omega_L}{\\omega_p}\n$$\n\n- **Condition for oscillation:** A₀³ ≥ 2(1+k)²/k. This roughly means C_L ≲ (A₀³/2)·C.\n- **Check:** For k = 1 (identical stages), this reduces to the familiar A₀ ≥ 2.\n- **Typical thresholds:**\n  - A₀ ≈ 10: oscillation dies at C_L ≈ 500C.\n  - A₀ ≈ 5: at about 60C.\n  - A₀ ≈ 3 (short-channel devices): at about 10C.\n\nBeyond this point, the circuit is a negative-feedback loop with a dominant pole. It behaves like a three-stage op amp with a large compensation capacitor in unity-gain feedback, which is stable.\n\n### Intuitive (large-signal) view\n\nThe tempting \"digital\" picture is: C_L charges slowly, the next two inverters flip, C_L then discharges, giving a slow oscillation. This assumes the inverters are ideal switches.\n\nIn reality, when V_X moves very slowly, inverters 2 and 3 have ample time to follow it along their finite-gain transfer curves. So V_Z ≈ f(f(V_X)) tracks V_X with negligible lag.\n\n- As V_X approaches V_M, inverter 1's input also approaches V_M.\n- Inverter 1's current into C_L tapers smoothly to zero, so V_X glides into V_M without overshoot.\n- The circuit degenerates into a first-order system, C_L·dV_X/dt = I₁(V_X), with one stable equilibrium.\n- A first-order system cannot oscillate.\n\nOscillation requires overshoot. The overshoot at node X is roughly (I/C_L)·(delay of stages 2 and 3), which shrinks as C_L grows. Once A₀² times that overshoot can no longer flip inverter 1, the oscillation dies.\n\nNear the critical C_L, the waveform is small and nearly sinusoidal, at a frequency of about 1/(RC) set by the unloaded stages.",
        "format": "markdown",
        "sha256": "781f0070a4192280f69e1709920935a5c731725cbec386608868826b98a33dbd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large load capacitance on one node can stop oscillation, and explains the dominant-pole gain/phase roll-off and eventual failure of the Barkhausen condition. The added approximate model and time-domain explanation support the essential result.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2292,
        "output_tokens": 18154,
        "total_tokens": 20446,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16947,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2292,
        "output_tokens": 18154,
        "total_tokens": 20446,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16947,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Yes, the ring stops oscillating once C_L is large enough\n\nA common guess is that a heavy load only lengthens one stage's delay, so the ring keeps running at a lower frequency. That is not what happens.\n\n## Small-signal (Barkhausen) view\n\nModel each inverter as a gain −A₀ with output resistance R. The loaded node then has a pole at ω_p1 = 1/(RC_L). The other two nodes, with capacitance C, have poles at ω₀ = 1/(RC).\n\n$$H(s)=\\frac{-A_0^3}{\\left(1+\\dfrac{s}{\\omega_{p1}}\\right)\\left(1+\\dfrac{s}{\\omega_0}\\right)^2}$$\n\nTo oscillate, the three poles must produce 180° of phase shift at a frequency where |H| ≥ 1.\n\n- As C_L grows, ω_p1 → 0. The first stage then contributes about 90° at all frequencies of interest.\n- The other two stages must supply the remaining 90°, or 45° each. So the phase-crossover frequency is ω_x ≈ ω₀.\n- The loop gain at that frequency is\n\n$$|H(j\\omega_x)|\\approx\\frac{A_0^3}{(\\omega_0/\\omega_{p1})\\cdot 2}=\\frac{A_0^3}{2}\\,\\frac{C}{C_L}$$\n\nThis falls below unity when\n\n$$C_L \\gtrsim \\frac{A_0^3}{2}\\,C$$\n\nFor example, this threshold is about 60C for A₀ = 5 and about 500C for A₀ = 10. Beyond it, the loop behaves like an op amp with a dominant pole in unity-gain feedback. It is stable, and its phase margin approaches 90° as C_L → ∞.\n\n## Intuitive (time-domain) view\n\nWith a huge C_L, the voltage at the loaded node X changes very slowly. Stages 2 and 3 are fast, so they track V_X almost instantly. Together they act as a non-inverting, high-gain buffer from X back to the input of stage 1.\n\nStage 1 therefore effectively has its input tied to its own output. That is strong negative feedback with negligible delay, like a self-biased inverter. V_X simply glides to the trip point (≈ V_DD/2 for symmetric inverters) and stays there, with crowbar current flowing.\n\nOscillation needs enough loop delay for the slow node to overshoot through the high-gain region before the correction arrives. That overshoot is roughly (I/C_L)·(2t_d), where I is stage 1's drive current and 2t_d is the delay through stages 2 and 3. It shrinks toward zero as C_L increases, so nothing sustains a swing.\n\n**Conclusion:** The ring does fail to oscillate if C_L becomes sufficiently large. It settles at the trip point instead.",
        "format": "markdown",
        "sha256": "e7aa6f91ac8323d08d58e797c4912ad9f92ccb506fa9ecae85ad158cd1d51453"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large CL stops oscillation and explains the dominant-pole gain roll-off causing the Barkhausen condition to fail. The phase and time-domain explanations are consistent with the essential result.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2292,
        "output_tokens": 15683,
        "total_tokens": 17975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2292,
        "output_tokens": 15683,
        "total_tokens": 17975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# The phase noise drops by 3 dB, and the power doubles\n\nThis assumes the node capacitances are set by the transistors themselves (a self-loaded ring).\n\n## Why\n\nThe ring with doubled widths is equivalent to **two identical copies of the original ring in parallel**, with corresponding nodes shorted together.\n\n**Frequency stays the same.** Each node now has twice the drive current and twice the capacitance (gate and drain junction). The stage delay, roughly C·V_DD/I, is unchanged, so f_osc = 1/(2N·T_D) is unchanged. The swing is still rail-to-rail.\n\n**Power doubles.** P ≈ N·C·V_DD²·f_osc, and C has doubled.\n\n**Phase noise falls by 3 dB.**\n- The noise currents of the two parallel halves are uncorrelated, so they add in power. The noise current PSD doubles (4kTγg_m with g_m doubled), so the rms noise current grows by only √2.\n- The signal adds coherently. The charge swing q_max = C·V_DD doubles, so q_max² grows 4×.\n- In the impulse-sensitivity view, the phase kick is Δφ ∝ Γ·Δq/q_max, so\n\n$$\\mathcal{L}(\\Delta\\omega)\\propto \\frac{\\Gamma_{rms}^2\\,\\overline{i_n^2}/\\Delta f}{q_{max}^2\\,\\Delta\\omega^2}\\;\\rightarrow\\;\\frac{2}{4}=\\frac{1}{2}$$\n\nThe ISF shape Γ is unchanged because the waveforms are unchanged. So L(Δf) falls by 10·log 2 = 3 dB at every offset.\n\nFlicker noise behaves the same way. The drain flicker-current PSD, proportional to g_m²/(WL), also doubles when W doubles. The 1/f³ region therefore drops by 3 dB too, and the 1/f³ corner stays put.\n\n## Interpretation\n\nThis matches the familiar ring-oscillator result (Hajimiri):\n\n$$\\mathcal{L}(\\Delta f)\\approx \\frac{8}{3\\eta}\\,\\frac{kT}{P}\\,\\frac{V_{DD}}{V_{char}}\\left(\\frac{f_0}{\\Delta f}\\right)^2$$\n\nFor a fixed f₀, phase noise is inversely proportional to power. Scaling the widths simply trades power for phase noise, roughly 3 dB per doubling of power. The figure of merit (FOM) stays constant, so you cannot improve it this way.\n\n## Caveat\n\nIf fixed wiring or load capacitance is significant, doubling W does not double the total node capacitance. The frequency then rises, and the improvement at a given offset differs from exactly 3 dB.",
        "format": "markdown",
        "sha256": "2db013a94a912d1d786ef61db13c9661c42f8dcee530814fd87a0bfc9a7449bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and explains it through doubled signal charge versus doubled, uncorrelated noise power, with the corresponding parallel-ring and doubled-power interpretation.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3617,
        "output_tokens": 4998,
        "total_tokens": 8615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3617,
        "output_tokens": 4998,
        "total_tokens": 8615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Phase noise drops by 3 dB, and power doubles\n\n**1. The frequency stays the same.** Each stage's delay scales as C·V_DD/I. Doubling W doubles the drain currents at the same gate drive. It also doubles the node capacitances, because the gate and drain capacitances scale with W and in this self-loaded ring they are the only load. So the delay, frequency, waveforms and rail-to-rail swing are all unchanged.\n\n**2. View it as two rings in parallel.** The wider circuit is exactly two identical copies of the original ring, with corresponding nodes tied together.\n\n**3. Noise versus signal.**\n- **Noise:** Each transistor's noise current power doubles. Thermal noise is 4kTγg_m and g_m doubles. Flicker noise, ∝ g_m²/(WL), also doubles. The two copies' noise sources are uncorrelated, so they add in power: ×2.\n- **Signal:** The charge swing at each node, q_max = C·V_DD, doubles. It enters the phase noise squared: ×4.\n- **Result:** Using the impulse sensitivity function (ISF) formulation, L(Δω) ∝ Γ²_rms·(ī_n²/Δf)/q²_max. The ISF Γ is unchanged because the waveforms are identical. So the phase noise scales by 2/4 = ½.\n\nAn equivalent view: each ring's noise now drives twice the capacitance, so its phase disturbance falls by 4 (6 dB). Two uncorrelated rings then contribute 2 × ¼ = ½.\n\n**4. Overall result.**\n- Phase noise falls by 3 dB at all offsets, in both the 1/f² and 1/f³ regions.\n- Jitter variance halves, so rms jitter falls by √2.\n- Power, P ∝ C·V_DD²·f, doubles.\n\nSo the figure of merit (phase noise normalized to power and frequency) is unchanged. This shows the basic ring-oscillator trade-off: phase noise is roughly ∝ kT/P at a given frequency. You can buy 3 dB of phase noise with each doubling of power, but scaling the devices cannot improve the FOM.\n\nThis assumes the node capacitance is dominated by the transistors. A fixed wiring or buffer capacitance would make the frequency rise somewhat, and the result would no longer be exactly 3 dB.",
        "format": "markdown",
        "sha256": "858fdd6c5a878e43687d9769b7698c3eba717665306daaa7368b8f98e549452d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and supports it with valid current/noise, signal-charge, and parallel-ring scaling arguments. The stated power doubling is also consistent with the golden solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3617,
        "output_tokens": 5126,
        "total_tokens": 8743,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3617,
        "output_tokens": 5126,
        "total_tokens": 8743,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Phase noise drops by 3 dB, and the power doubles\n\nThe circuit is a three-stage CMOS inverter ring oscillator. Doubling all widths scales the oscillator up without changing its waveform, assuming each node's capacitance comes mainly from the transistors themselves (negligible wiring or fixed load capacitance).\n\n**1. Frequency stays the same.**\nThe stage delay is roughly t_d ∝ C·V_DD / I. Doubling W doubles both the drive current I and the node capacitance C, so f₀ is unchanged. The swing stays rail-to-rail (V_DD).\n\n**2. Power doubles.**\nP ≈ N·C·V_DD²·f₀, and C has doubled.\n\n**3. Noise current PSD doubles.**\n- Thermal noise: 4kTγg_m ∝ W, so it doubles.\n- Flicker noise: K·g_m² / (C_ox·W·L·f) ∝ W, so it also doubles.\n\n**4. Signal charge quadruples in power.**\nPhase noise depends on the injected noise relative to the charge swing at each node (ISF formulation):\n\n$$\n\\mathcal{L}(\\Delta\\omega) \\propto \\frac{\\Gamma_{rms}^2\\,\\overline{i_n^2}/\\Delta f}{2\\,q_{max}^2\\,\\Delta\\omega^2}, \\qquad q_{max} = C\\,V_{DD}\n$$\n\n- Γ_rms is unchanged because the waveform shape is unchanged.\n- The noise term \\(\\overline{i_n^2}\\) doubles.\n- q_max doubles, so q_max² quadruples.\n\nThe net change is 2/4 = 1/2, so the phase noise falls by 3 dB. This holds in both the 1/f² and 1/f³ regions.\n\n**Intuition**\n\nThe wider circuit is equivalent to two identical rings tied together node by node. Their signals add coherently, while their uncorrelated noise sources add only in power. The noise-to-signal ratio therefore improves by a factor of 2 (3 dB).\n\nFrom a jitter viewpoint, the per-stage timing error variance goes as (kT/C)/(slope)². The slope I/C is unchanged while C doubles, so the jitter variance halves.\n\n**Implication**\n\nThe figure of merit, FOM = 𝓛 + 10 log(P/1 mW) − 20 log(f₀/Δf), is unchanged. Ring oscillators therefore trade phase noise for power directly: each 3 dB improvement costs twice the power. If wiring or fixed load capacitance were significant, the frequency would also rise, and the comparison would need to be made at the same normalized frequency.",
        "format": "markdown",
        "sha256": "823da9e9dc47e00502b487be173c65f1a5898a64b8fcb96941f011b3029dba86"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts a 3 dB phase-noise reduction and supports it with the valid scaling argument: device noise power doubles while signal charge squared quadruples. The stated power tradeoff is also consistent with the assumptions.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3617,
        "output_tokens": 5700,
        "total_tokens": 9317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3617,
        "output_tokens": 5700,
        "total_tokens": 9317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Result:** $R_X=\\dfrac{1}{NC\\,(f_{osc}+V_{DD}K_{VCO})}$, which is roughly $1/g_m\\approx V_{DD}/(2I_{DD})$ for simple square-law inverters. I could not check this against a published answer, and the simplified forms depend on the delay model chosen.\n\nThe ring draws pulsed current. For supply variations slow compared with the oscillation period, it acts as a resistance $R_X = \\partial V_{DD}/\\partial I_{DD}$, where $I_{DD}$ is the average supply current.\n\n**1. Average supply current**\n\n- Let each of the $N$ inverters drive a capacitance $C$.\n- In every period, each output node is charged once from 0 to $V_{DD}$ through a PMOS device. That takes a charge $CV_{DD}$ from the supply.\n- The average current is therefore\n\n$$\nI_{DD}=NCV_{DD}\\,f_{osc}\\qquad\\left(P=NCV_{DD}^2f_{osc}\\right)\n$$\n\n- Since $f_{osc}=1/(2NT_D)$, this equals $I_{DD}=CV_{DD}/(2T_D)$.\n\n**2. Small-signal resistance (general)**\n\nDifferentiate with respect to $V_{DD}$, remembering that $f_{osc}$ also depends on $V_{DD}$:\n\n$$\nR_X=\\left(\\frac{\\partial I_{DD}}{\\partial V_{DD}}\\right)^{-1}=\\frac{1}{NC\\left(f_{osc}+V_{DD}\\,\\dfrac{\\partial f_{osc}}{\\partial V_{DD}}\\right)}=\\frac{1}{NC\\,(f_{osc}+V_{DD}K_{VCO})}\n$$\n\nHere $K_{VCO}=\\partial f_{osc}/\\partial V_{DD}$ is the supply sensitivity in Hz/V.\n\n**3. With a simple square-law delay model**\n\n- Assume each transition is driven by a saturated transistor with $I_D=\\tfrac12\\mu C_{ox}\\tfrac{W}{L}(V_{DD}-V_{TH})^2$.\n- The output moves by $V_{DD}/2$ in one delay, so $T_D\\approx CV_{DD}/(2I_D)$.\n- Then $f_{osc}=1/(2NT_D)=I_D/(NCV_{DD})$.\n- Substituting gives $I_{DD}=I_D$. On average, the ring draws the saturation current of one transistor.\n\nTherefore\n\n$$\nR_X\\approx\\frac{1}{\\mu C_{ox}\\frac{W}{L}(V_{DD}-V_{TH})}=\\frac{1}{g_m}=\\frac{V_{DD}-V_{TH}}{2I_{DD}}\n$$\n\n**Special case:** if $V_{TH}\\ll V_{DD}$, then $f_{osc}\\propto V_{DD}$ and\n\n$$\nR_X\\approx\\frac{V_{DD}}{2I_{DD}}=\\frac{1}{2NCf_{osc}}\n$$\n\nThis is about half the \"DC\" resistance $V_{DD}/I_{DD}$. The result neglects short-circuit (crowbar) current.",
        "format": "markdown",
        "sha256": "00cd209141e5a86dbee83b08ef36de954d0c5767a1e58b88325855884890feb0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven charging of the node capacitances and derives the supply-current slope including the frequency dependence. Its VDD-proportional-frequency result, 1/(2NCfosc), gives the golden refined value 1/(6CLfosc) for three stages.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3448,
        "output_tokens": 13305,
        "total_tokens": 16753,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12198,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3448,
        "output_tokens": 13305,
        "total_tokens": 16753,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12198,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Small-signal resistance at the supply node of the ring oscillator\n\n**Result:** R_X = 1/[3C(f_osc + V_DD·∂f_osc/∂V_DD)], which is about 1/(6C·f_osc) if f_osc ∝ V_DD.\n\n## Supply current\n\nLet each of the three nodes have capacitance C, and let the ring oscillate at f_osc.\n\n- In every period, each output node is charged from 0 to V_DD once through its PMOS. It is then discharged to ground through its NMOS.\n- Each node therefore draws a charge of C·V_DD from the supply per cycle.\n- Neglecting crowbar (short-circuit) current, the average supply current is:\n\n$$\nI_{DD}=3\\,C\\,V_{DD}\\,f_{osc}\n$$\n\nThe large-signal ratio is V_DD/I_DD = 1/(3Cf_osc). Seen from the supply, the ring acts like a switched-capacitor resistor.\n\n## Small-signal resistance\n\nA small change in V_DD changes the supply current in two ways:\n\n- It changes the charge drawn per cycle, through C·ΔV_DD.\n- It changes the oscillation frequency, because f_osc depends on V_DD.\n\nDifferentiating I_DD with respect to V_DD:\n\n$$\n\\frac{1}{R_X}=\\frac{\\partial I_{DD}}{\\partial V_{DD}} = 3C f_{osc}+3C\\,V_{DD}\\frac{\\partial f_{osc}}{\\partial V_{DD}}\n$$\n\n$$\n\\boxed{R_X=\\frac{1}{3C\\left(f_{osc}+V_{DD}\\dfrac{\\partial f_{osc}}{\\partial V_{DD}}\\right)}}\n$$\n\nHere ∂f_osc/∂V_DD is the supply sensitivity in Hz/V. Since it is positive, R_X is smaller than the large-signal value 1/(3Cf_osc).\n\n## Approximate values\n\n**Frequency proportional to V_DD.** If f_osc is roughly proportional to V_DD, then V_DD·∂f_osc/∂V_DD ≈ f_osc. This gives:\n\n$$\nR_X\\approx\\frac{1}{6Cf_{osc}}\n$$\n\nThis is about half of V_DD/I_DD.\n\n**Square-law device model.** Assume the stage delay is T_D ≈ CV_DD/(2I_D), with I_D = ½μC_ox(W/L)(V_DD − V_TH)².\n\n- The frequency is f_osc = 1/(6T_D) = I_D/(3CV_DD).\n- Substituting gives I_DD = I_D.\n- Hence R_X = 1/g_m = 1/[μC_ox(W/L)(V_DD − V_TH)].\n\nThis reduces to 1/(6Cf_osc) when V_TH ≪ V_DD.",
        "format": "markdown",
        "sha256": "b18fec31689fcb46d3e3ff8c1e361e9232430f879310f56e77a0c293555f25b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven charging of the three load capacitances as the supply-current mechanism, derives the incremental resistance including frequency dependence, and gives the valid 1/(6Cf_osc) refinement when frequency is proportional to V_DD. The square-law example is consistent with that model.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3448,
        "output_tokens": 14060,
        "total_tokens": 17508,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13091,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3448,
        "output_tokens": 14060,
        "total_tokens": 17508,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13091,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$R_X$ is the slope $\\partial V_{DD}/\\partial I_X$ of the ring's **average** supply current versus $V_{DD}$, so the first step is to find that current. The general result is $R_X = [3C_L(f_{osc}+V_{DD}\\,\\partial f_{osc}/\\partial V_{DD})]^{-1}$, which with a square-law delay model reduces to about $1/g_m$.\n\n**1. Average current drawn from the supply**\n\nLet each node have capacitance $C_L$ and swing rail to rail.\n\n- In every period, each output is charged once from 0 to $V_{DD}$ through its PMOS. It is discharged once to ground through its NMOS.\n- Only the charging takes charge from the supply, $Q=C_LV_{DD}$ per node per cycle.\n- Neglecting crowbar (short-circuit) current, for three stages:\n\n$$\nI_X = 3C_LV_{DD}f_{osc}\n$$\n\nDifferentiating with respect to $V_{DD}$ gives the general result:\n\n$$\nR_X=\\frac{\\partial V_{DD}}{\\partial I_X}=\\frac{1}{3C_L\\left(f_{osc}+V_{DD}\\,\\dfrac{\\partial f_{osc}}{\\partial V_{DD}}\\right)}\n$$\n\n**2. Using a simple delay model**\n\n$f_{osc}=1/(6T_D)$. Estimate the stage delay as the time for the on-current to move the output by $V_{DD}/2$:\n\n$$\nT_D\\approx\\frac{C_LV_{DD}/2}{I_D},\\qquad I_D=\\tfrac12\\mu C_{ox}\\tfrac{W}{L}(V_{DD}-V_{TH})^2\n$$\n\n$I_D$ is the saturation current of a transistor with $|V_{GS}|=V_{DD}$. Then\n\n$$\nf_{osc}\\approx\\frac{I_D}{3C_LV_{DD}}\\;\\;\\Rightarrow\\;\\; I_X = 3C_LV_{DD}f_{osc}\\approx I_D\n$$\n\nSo the whole ring draws, on average, the current of one transistor whose gate–source voltage is $V_{DD}$. From the supply, it behaves like a diode-connected device.\n\n**3. Small-signal resistance**\n\n$$\nR_X=\\left(\\frac{\\partial I_D}{\\partial V_{DD}}\\right)^{-1}=\\frac{1}{\\mu C_{ox}\\frac{W}{L}(V_{DD}-V_{TH})}=\\frac{1}{g_m}=\\frac{V_{DD}-V_{TH}}{2I_X}\n$$\n\nHere $g_m$ is the transconductance of an inverter transistor biased at $|V_{GS}|=V_{DD}$. If $V_{TH}\\ll V_{DD}$, then $R_X\\approx V_{DD}/(2I_X)$, which is half the \"large-signal\" value $V_{DD}/I_X$.\n\nIf the devices are velocity-saturated, $I_D\\propto V_{DD}-V_{TH}$ instead, and $R_X\\approx (V_{DD}-V_{TH})/I_X$.",
        "format": "markdown",
        "sha256": "2c019604b0023b98573371cf14a3383cade889ce58b1cf59999627034cb95b0e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies oscillation-driven charging of the three load capacitances and derives the average supply current and its incremental resistance, including the dependence of frequency on VDD. The 1/gm result follows from its explicit square-law delay model, so it is a dynamic refinement rather than a static-only gm argument.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3448,
        "output_tokens": 14725,
        "total_tokens": 18173,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13649,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3448,
        "output_tokens": 14725,
        "total_tokens": 18173,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13649,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Yes: the formula applies only when the ring is not oscillating\n\n## When the formula is valid\n\nThe ring's only DC solution is all three nodes at the inverter trip point V_M. Suppose VDD changes slowly. By symmetry, all three nodes then move by the same amount. Each inverter's input therefore tracks its own output, as if input and output were shorted.\n\nEach stage then acts as a diode-connected NMOS in series with a diode-connected PMOS. That gives\n\n```text\nRX ≈ (1/3)(1/gmn + 1/gmp),   with gm's evaluated at V_M\n```\n\n## Why it fails during oscillation\n\nThat equilibrium is unstable. With stage gain greater than 2, the loop gain exceeds 1 at the frequency where each stage contributes 60° of phase, so the ring leaves the trip point and oscillates.\n\nOnce it oscillates:\n\n- Each node swings nearly rail to rail.\n- An inverter's input is nowhere near its output, so the \"diode-connected\" picture no longer holds.\n- The transistors are mostly off or in triode and conduct heavily only during transitions. There is no bias point, so gmn and gmp at V_M mean nothing.\n- The supply current is a train of pulses.\n\nThe meaningful quantity is the incremental resistance for slow changes in VDD:\n\n```text\nRX = ∂VDD / ∂I_avg\n```\n\n## The resistance during oscillation\n\nOnce per period, each stage charges its load capacitance C from 0 to VDD, drawing a charge of C·VDD from the supply. Neglecting crowbar (short-circuit) current:\n\n```text\nI_avg ≈ 3 C VDD f_osc\n```\n\nDifferentiating with respect to VDD gives\n\n```text\nRX = 1 / [3C f_osc + 3C VDD (∂f_osc/∂VDD)]\n   = [1/(3C f_osc)] || [1/(3C VDD K_DD)]\n```\n\nThe two terms have separate physical meanings:\n\n- **1/(3C f_osc):** a switched-capacitor resistor. Each cycle, every stage moves C·ΔVDD of extra charge.\n- **1/(3C VDD K_DD):** the ring also speeds up as VDD rises (K_DD = ∂f_osc/∂VDD > 0), so it cycles more often.\n\nA ring's frequency is roughly proportional to VDD, so K_DD ≈ f_osc/VDD. Then I_avg ∝ VDD², and\n\n```text\nRX ≈ 1/(6 C f_osc) ≈ VDD / (2 I_avg)\n```\n\nIf f_osc rises faster than VDD, RX is somewhat lower. For square-law devices, for example, RX ≈ (VDD − VTH)/(2 I_avg).\n\nA useful way to picture this: since f_osc = 1/(6T_D), where T_D is the stage delay, I_avg ≈ C·VDD/(2T_D). That is roughly the drive current of one switching transistor. The supply effectively sees about one device conducting at a time, not three self-biased inverters.\n\n## Bottom line\n\nDuring oscillation, RX is set by the node capacitance, the oscillation frequency, and how the delay depends on VDD, not by the trip-point transconductances. Its value generally differs substantially from (1/3)(1/gmn + 1/gmp).\n\nTwo caveats:\n\n- Crowbar current lowers RX somewhat further.\n- This average-current picture holds only for supply variations much slower than f_osc.",
        "format": "markdown",
        "sha256": "e290f95755fc80cf89d88b21d82563cfa023b0e1f95a894d8dc84937207911da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly derives the oscillating supply current from charging the node capacitances and includes the frequency-dependence refinement. But it says the resistance generally differs substantially from the static estimate, missing the key conclusion that it remains on the order of a device on-resistance or inverse transconductance, not much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 22721,
        "total_tokens": 26283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21557,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 22721,
        "total_tokens": 26283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21557,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Yes, the answer changes\n\nThe expression applies only when the ring is **not** oscillating.\n\n## When the formula is valid\n\nThe formula is a small-signal result around the ring's DC equilibrium. There, every node sits at the inverter trip point and all six transistors are in saturation with transconductances gmn and gmp. A change in V_DD drives all three stages identically, so by symmetry the three nodes move together. Each inverter's input therefore equals its output, which makes it a diode-connected PMOS in series with a diode-connected NMOS. Three such branches in parallel give\n\n```text\nRX ≈ (1/3)(1/gmn + 1/gmp)        (neglecting r_o)\n```\n\nThis equilibrium is unstable, so the ring leaves it and starts oscillating. The formula therefore describes the circuit only at startup, or if the stages lack enough gain to oscillate.\n\n## When the circuit oscillates\n\n- **The diode picture no longer holds.** The nodes swing rail to rail, and each device alternates between off and on (saturation or triode). There is no fixed bias point, so gmn and gmp lose their meaning. The nodes are also no longer equal to one another.\n- **The supply current is set by capacitor charging.** It becomes a train of pulses that charge the node capacitances. Let C_L be the effective capacitance at each node. Each node is charged from 0 to V_DD once per period, drawing C_L·V_DD from the supply. Neglecting crowbar (short-circuit) current:\n\n```text\nI_avg ≈ 3 C_L V_DD f_osc\n```\n\n- **The ring acts like three switched-capacitor resistors.** Each node capacitor is connected to V_DD, then to ground, once per cycle:\n\n```text\nV_DD / I_avg ≈ 1 / (3 C_L f_osc)\n```\n\n- **The oscillation frequency also depends on V_DD.** This matters for the incremental (small-signal) resistance, defined for supply changes slow compared with f_osc:\n\n```text\n1/RX = dI_avg/dV_DD = 3 C_L f_osc + 3 C_L V_DD (df_osc/dV_DD)\n\nRX = 1 / [3 C_L (f_osc + V_DD·K_VDD)],     K_VDD = df_osc/dV_DD\n```\n\n  This is the switched-capacitor resistance 1/(3C_L f_osc) in parallel with 1/(3C_L V_DD K_VDD). For example, if f_osc ∝ V_DD, then RX ≈ 1/(6 C_L f_osc).\n\n## Rough check with square-law devices\n\nAssume a stage delay T_D ≈ C_L V_DD/(2 I_on), where I_on ∝ (V_DD − V_TH)². Then:\n\n- I_avg ≈ I_on, because roughly one device is charging a node at any time.\n- RX ≈ (V_DD − V_TH)/(2 I_avg), which is about 1/gm of a device with full gate drive (V_GS = V_DD).\n- This is not the trip-point gm, and it is roughly independent of the number of stages. The static result, by contrast, scales as 1/N.\n\n## Summary\n\nOnce the ring oscillates, RX is set by the node capacitance, the oscillation frequency and its supply sensitivity, not by the bias-point transconductances. Two caveats apply:\n\n- Crowbar current adds a modest extra conductance.\n- For supply perturbations near f_osc, the idea of a simple resistance breaks down, because the perturbation modulates the oscillation frequency and phase.",
        "format": "markdown",
        "sha256": "6752433aebbcae3b52b36911982c012716b302eb96702a34c72e0185f6800c2c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly models oscillating supply current as charging the node capacitances, includes the effect of frequency changing with supply voltage, and shows that the resulting resistance remains on the order of 1/gm rather than becoming much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 18981,
        "total_tokens": 22543,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17795,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 18981,
        "total_tokens": 22543,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17795,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** The formula only applies when the ring is *not* oscillating, i.e., when it sits at its DC equilibrium point.\n\n## Why the formula is right at equilibrium\n\nAn odd-stage ring has a single DC operating point: every node sits at the inverter trip voltage V_M. A change in V_DD hits all three stages identically, so by symmetry all three node voltages move by the same amount. Each inverter's input is the previous node, so V_in = V_out for every stage. That means each NMOS and PMOS behaves as if its gate were tied to its drain, so it acts as a diode-connected device.\n\n- Each stage presents `1/gmp + 1/gmn` from V_DD to ground. More precisely, this is `1/(gmp+gdsp) + 1/(gmn+gdsn)`.\n- Three stages in parallel give `RX ≈ (1/3)(1/gmn + 1/gmp)`.\n- A common supply perturbation does not excite the rotating modes of the ring, which are the modes that oscillate.\n\nHowever, this operating point is unstable if each stage's gain exceeds 2. A working ring leaves it and settles into a limit cycle.\n\n## When it oscillates\n\n**The trip-point gm's no longer apply.** The nodes swing nearly rail to rail. Each transistor is either off, or fully on in triode with almost zero V_DS and almost no current. An inverter passes through its trip point only briefly. There is no fixed bias point, so the small-signal model no longer describes the circuit.\n\n**The ring acts like a switched capacitor.** The supply current is a train of pulses at 3·f_osc. Each time a node rises, its PMOS draws a charge C_L·V_DD from the supply. Here C_L is the effective switched capacitance per node, which can also absorb short-circuit charge. With three rising edges per period:\n\n```text\nI_DD,avg ≈ 3 C_L V_DD f_osc    →    V_DD / I_DD ≈ 1 / (3 C_L f_osc)\n```\n\n**The small-signal resistance must include f_osc's dependence on V_DD.** For a small, slow change in V_DD, the oscillation frequency changes too:\n\n```text\nRX = ∂V_DD/∂I_DD = 1 / [ 3 C_L ( f_osc + V_DD · ∂f_osc/∂V_DD ) ]\n```\n\nBecause f_osc rises with V_DD, this is lower than 1/(3 C_L f_osc).\n\n**Example with square-law devices:**\n\n- The frequency scales as f_osc ∝ (V_DD − V_TH)² / (C_L V_DD).\n- So the average current scales as I_DD ∝ (V_DD − V_TH)², roughly independent of C_L.\n- To the supply, the whole oscillating ring looks like one square-law device, with RX ≈ (V_DD − V_TH)/(2 I_DD).\n- With velocity-saturated devices, RX ≈ (V_DD − V_TH)/I_DD instead.\n\n## Bottom line\n\nIn oscillation, RX is set by three things: the switched node capacitance, f_osc, and how f_osc varies with V_DD. It is not set by gmn and gmp at the trip point. It is also only an average quantity, meaningful for supply perturbations much slower than the oscillation, since the instantaneous current pulses at 3·f_osc.\n\nThis is the resistance that a regulator or current source feeding a supply-tuned ring actually sees.",
        "format": "markdown",
        "sha256": "eed77c03c2f14c1cd31f85897ed538893c5ae1708d21e210a80129f1805aab0e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly derives the capacitive supply current and accounts for how frequency varies with VDD. Its square-law and velocity-saturation expressions show an equivalent MOS inverse-gm/on-resistance scale, not a much larger resistance caused by devices being off.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 21813,
        "total_tokens": 25375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 21813,
        "total_tokens": 25375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# The initial voltage gain decreases as M7 gets wider\n\n## Why\n\n**1. Gain of the first phase.** When CK goes high, M1 and M2 discharge C_P and C_Q.\n\n- Each node falls at a common-mode rate of I_CM/C_P, where I_CM = I_D7/2.\n- The differential current g_m1·ΔV_in builds up a differential voltage ΔV_PQ = g_m1·ΔV_in·t/C_P.\n- The phase ends when V_P and V_Q have dropped by about V_THN, because M3 and M4 then turn on. That takes t₁ ≈ C_P·V_THN/I_CM.\n\nSubstituting t₁ gives:\n\n$$\nA_v=\\frac{\\Delta V_{PQ}}{\\Delta V_{in}}\\approx\\frac{g_{m1}V_{THN}}{I_{CM}}\n$$\n\nThe same form, with |V_THP| in place of V_THN, holds up to the point where X and Y fall far enough to turn on M5 and M6. The gain does not depend on the capacitances. It depends only on g_m/I_D of the input pair. With square-law devices:\n\n$$\nA_v\\approx\\frac{2V_{TH}}{(V_{GS}-V_{TH})_{1,2}}\n$$\n\n**2. Effect of widening M7.**\n\n- A wider M7 conducts more current and pulls the tail node lower.\n- M1 and M2 therefore carry a larger I_CM with a larger overdrive.\n- The nodes discharge faster, so the integration time shrinks in proportion to 1/I_CM.\n- g_m1 grows only as √I_CM, so g_m1/I_CM falls. In strong inversion the gain drops roughly as 1/√I_D7.\n\n**3. Limits.**\n\n- Once M7 is wide enough to sit deep in triode and act as a plain switch (tail node near ground), the current is set by the input common-mode level. The gain then levels off at its minimum, about 2V_TH/(V_in,CM − V_TH).\n- If the input pair stayed in weak inversion, g_m/I_D would be fixed, and the gain (about V_TH/(nV_T)) would become insensitive to W7.\n\n## Trade-off\n\nA wider M7 makes the latch faster. However, it gives less gain before regeneration. As a result, the noise and offset of M3 through M6 are suppressed less, and the input-referred noise and offset rise.",
        "format": "markdown",
        "sha256": "b857991a76a98f6991473db447ef61fa6db96df3b7a7863cbcfeedb66b3a8c2e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M7 increases tail current while input-pair gm grows more slowly, so gm/ICM and the initial gain decrease. The additional qualifications do not change the central conclusion.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4805,
        "output_tokens": 10085,
        "total_tokens": 14890,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9271,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4805,
        "output_tokens": 10085,
        "total_tokens": 14890,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9271,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Answer: The initial voltage gain decreases\n\n**Initial gain.** When CK goes high, M1 and M2 discharge C_P and C_Q. Each carries about I_CM/2.\n\n- The common-mode level of P and Q falls by about V_TH before M3 and M4 turn on. This takes\n t₁ ≈ C_P·V_TH/(I_CM/2).\n- During this time, the differential current builds\n ΔV_PQ = g_m1,2·ΔV_in·t₁/C_P.\n\nSo the initial gain is\n\n$$A_v \\approx \\frac{g_{m1,2}V_{TH}}{I_{CM}/2}=\\frac{2V_{TH}}{(V_{GS}-V_{TH})_{1,2}}\\;\\propto\\;\\sqrt{\\frac{\\mu C_{ox}(W/L)_{1,2}}{I_{CM}}}$$\n\nThe gain depends on g_m/I_D of the input pair, not on C_P.\n\n**Effect of widening M7.**\n\n- M7 is a switch with V_GS = V_DD, so it operates in the triode region. It acts as a resistance in series with the pair's common source node.\n- A wider M7 has lower on-resistance. This pulls the common source node closer to ground.\n- V_GS of M1 and M2 therefore increases, raising both their overdrive and I_CM.\n- P and Q then discharge faster, so t₁ shrinks in proportion to 1/I_CM. Meanwhile g_m grows only as √I_CM.\n- The net result is that g_m/I_D drops and A_v falls, roughly as 1/√I_CM.\n\n**Limits and trade-off.**\n\n- The drop is bounded. Once M7 is wide enough that V_DS7 ≈ 0, the overdrive levels off at V_in,CM − V_TH. The gain then approaches about 2V_TH/(V_in,CM − V_TH).\n- A wider M7 makes the comparator faster, but the lower front-end gain lets the offset and noise of M3–M6 matter more.\n- If M1 and M2 were biased in weak inversion, g_m/I_D would be nearly constant. The gain would then be fairly insensitive to the width of M7.",
        "format": "markdown",
        "sha256": "a37fe398219001125663acbdfee04d378bbe9cc0b268ae0a75bab7b57d3bcf0e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M7 increases tail current while input-pair gm grows more slowly, reducing gm/ICM and therefore the initial gain. Minor formula and operating-detail imprecision does not change the conclusion.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4805,
        "output_tokens": 9175,
        "total_tokens": 13980,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8435,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4805,
        "output_tokens": 9175,
        "total_tokens": 13980,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8435,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The initial voltage gain decreases as M7 is made wider.** The circuit gets faster, but it provides less preamplification.\n\n**Where the initial gain comes from**\n\nWhen CK goes high, P, Q, X and Y all start at V_DD. M3 and M4 stay off at first because their V_GS ≈ 0. So M1 and M2 simply discharge C_P and C_Q:\n\n|V_P − V_Q| = g_m1,2·|V_in1 − V_in2|·t / C_P\n\nThis phase ends when V_P and V_Q have fallen by about V_THN, which turns M3 and M4 on. That takes\n\nt₁ ≈ C_P·V_THN / (I_CM/2)\n\nThe gain at the end of this phase is therefore\n\nA_v = g_m1,2·V_THN / (I_CM/2) = 2V_THN / (V_GS − V_TH)₁,₂\n\nC_P cancels, so the gain depends only on the g_m/I_D of the input pair.\n\n**Effect of widening M7**\n\n- With CK = V_DD, M7 normally sits in the triode region and acts as a resistor. A wider M7 has lower on-resistance, so it pulls the tail node closer to ground.\n- For fixed M1 and M2 sizes and a fixed input common-mode level, this raises I_CM. M1 and M2 then run with a larger overdrive, so g_m/I_D drops and A_v drops.\n- Put another way, the integration time t₁ shrinks as 1/I_CM. Meanwhile g_m grows only about as √I_CM in the square-law region, and even less under velocity saturation. The gain therefore falls roughly as 1/√I_CM.\n- If M1 and M2 were in weak inversion, g_m/I_D would be nearly constant. The gain would then be fairly insensitive to W₇ until the pair moves into strong inversion.\n\n**Limit**\n\nFor a very wide M7, the tail node is essentially at ground, so the overdrive of M1 and M2 approaches V_in,CM − V_THN. The gain then bottoms out at about\n\nA_v,min ≈ 2V_THN / (V_in,CM − V_THN)\n\nFor example, with V_THN = 0.3 V, an overdrive of 0.1 V gives A_v ≈ 6, while 0.3 V gives A_v ≈ 2.\n\n**Trade-off**\n\nA wider M7 shortens the first phase and speeds up the decision. The cost is a lower initial gain, so the offset and noise of M3–M6 referred to the input become larger. The input-referred noise of M1 and M2 also rises, since it scales roughly as kT/(A_v·C_P). For high gain, keep M7 relatively narrow, or make M1 and M2 wide so they operate at a small overdrive.",
        "format": "markdown",
        "sha256": "785fa67a34f17c0520eede58bffa5ab3e8b89c9e809a0190e1de5b358c895031"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M7 increases tail current and decreases the input pair’s gm/ID, reducing the initial integration gain. The supporting explanation is physically consistent; extra trade-off details do not undermine the central answer.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4805,
        "output_tokens": 9951,
        "total_tokens": 14756,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9029,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4805,
        "output_tokens": 9951,
        "total_tokens": 14756,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9029,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Effect of Larger C_P and C_Q on the Initial Gain of the StrongARM Latch\n\n**The initial voltage gain does not change.** It is independent of C_P and C_Q. A larger capacitance only slows down the first amplification phase.\n\n## Why\n\n**First amplification phase.** When CK goes high, M7 turns on. M3–M6 are still off, so X and Y stay at V_DD. M1 and M2 simply discharge C_P and C_Q.\n\n- **Common-mode current:** each device draws I_CM/2, so V_P and V_Q fall at a rate of I_CM/(2C_P).\n- **Differential current:** g_m1,2·ΔV_in, so the differential voltage grows linearly:\n\n$$|V_P - V_Q| = \\frac{g_{m1,2}\\,\\Delta V_{in}}{C_P}\\,t$$\n\n**End of the phase.** The phase ends when P and Q drop by about V_THN, which turns M3 and M4 on. This takes:\n\n$$t_1 \\approx \\frac{2C_P V_{THN}}{I_{CM}}$$\n\n**Resulting gain.** Substituting t₁ gives:\n\n$$|A_v| = \\frac{|V_P - V_Q|}{\\Delta V_{in}} = \\frac{g_{m1,2}V_{THN}}{I_{CM}/2} = \\frac{2V_{THN}}{(V_{GS}-V_{TH})_{1,2}}$$\n\nC_P cancels out. A larger capacitance makes the differential voltage build up more slowly, but it also lengthens the integration time t₁ by the same factor. The differential voltage at the end of the phase is therefore the same.\n\nFor example, with V_THN ≈ 0.3 V and an overdrive of 0.2 V, A_v ≈ 3 regardless of C_P.\n\n## What larger C_P and C_Q do change\n\n- **Speed:** t₁ grows in proportion to C_P, so the latch is slower.\n- **Energy:** more charge must be restored during precharge, so energy per comparison increases.\n- **Noise:** the input-referred noise falls, roughly like kT/C_P. The noise of M1 and M2 is integrated over a longer time on a larger capacitor. This is why designers sometimes deliberately add capacitance at P and Q, trading speed and power for lower noise.\n\nTo raise the initial gain itself, you must lower the overdrive of M1 and M2. Changing C_P will not do it.",
        "format": "markdown",
        "sha256": "65841b3f46bd3d1a9e32a9b3f2386a5af176d7807d33f6cd4224837caad50397"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes the initial gain is unchanged and shows that the larger capacitance slows the differential buildup while extending the amplification interval proportionally, so the capacitance cancels. The extra secondary comments do not alter the essential answer.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4806,
        "output_tokens": 8865,
        "total_tokens": 13671,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8041,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4806,
        "output_tokens": 8865,
        "total_tokens": 13671,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8041,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# The initial gain stays essentially the same\n\nThe initial gain is the gain at nodes P and Q during the first phase of evaluation. To first order it does not depend on C_P and C_Q.\n\n## Why\n\nWhen CK goes high, M7 turns on. M1 and M2 discharge C_P and C_Q. M3 and M4 stay off until P and Q have fallen by about V_THN.\n\n- **Common-mode discharge:** V_P,Q ≈ V_DD − (I_CM/2)·t / C_P\n- **Differential build-up:** |V_P − V_Q| ≈ g_m1,2 |V_in1 − V_in2| · t / C_P\n- **End of the first phase:** P and Q have dropped by V_THN, so t₁ ≈ 2C_P V_THN / I_CM\n\nTherefore, at t = t₁:\n\n$$\nA_v=\\frac{|V_P-V_Q|}{|V_{in1}-V_{in2}|}=\\frac{g_{m1,2}\\,t_1}{C_P}=\\frac{2g_{m1,2}V_{THN}}{I_{CM}}=\\frac{V_{THN}}{(V_{GS}-V_{TH})_{1,2}/2}\n$$\n\nC_P cancels out. A larger capacitance makes the differential voltage grow more slowly, since its slope scales as 1/C_P. But the phase also lasts proportionally longer, because it ends at a fixed common-mode drop of V_THN. The two effects offset each other. The gain is set only by V_THN and the input pair's overdrive voltage.\n\n## What does change\n\n- **Speed:** t₁ grows in proportion to C_P, so the latch's total delay increases.\n- **Power:** P and Q swing fully every cycle, costing about 2C_P·V_DD²·f_CK. That rises with C_P.\n- **Noise:** the noise of M1 and M2 is integrated over a longer time on a larger capacitance. The input-referred noise variance falls roughly as kT/C_P.\n\nSo adding capacitance at P and Q trades speed and power for lower noise, without changing the initial gain.",
        "format": "markdown",
        "sha256": "6dd95b123cf34c4e3bf0ad35bc6bacd9a4c98a831b2e695896d40f13116b5ab2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes the initial gain is essentially unchanged and shows that the slower differential buildup is offset by a proportionally longer amplification phase, so capacitance cancels. The added speed, power, and noise comments are secondary.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4806,
        "output_tokens": 16107,
        "total_tokens": 20913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15401,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4806,
        "output_tokens": 16107,
        "total_tokens": 20913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15401,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Answer: To first order, nothing.** The initial gain does not depend on C_P = C_Q. A larger capacitance only makes the first phase last longer.\n\n**Why**\n\nWhen CK goes high, M1 and M2 carry I_CM/2 ± g_m·ΔV_in/2 and discharge C_P and C_Q. M3 and M4 are still off at this point.\n\n- **Common mode:** V_P and V_Q fall at a rate of about I_CM/(2C_P).\n- **Differential:** the difference current is integrated on the capacitors, so |V_P − V_Q| = g_m·|ΔV_in|·t / C_P.\n\nThis integration stops when P and Q have dropped by about V_THN, because M3 and M4 then turn on. That takes\n\nt₁ ≈ C_P·V_THN / (I_CM/2) = 2·C_P·V_THN / I_CM\n\nSo the gain at the end of this phase is\n\n|ΔV_PQ / ΔV_in| = g_m·t₁ / C_P = 2·g_m·V_THN / I_CM = (g_m/I_D)·V_THN ≈ 2·V_THN / (V_GS − V_TH)₁,₂\n\nC_P cancels. If you double C_P, both the common-mode and the differential slopes are halved. The circuit therefore integrates for twice as long and ends up with the same ΔV_PQ. The later gain to X and Y is not degraded either. The larger differential charge stored on C_P and C_Q is passed on to X and Y when M3 and M4 turn on.\n\n**What does change**\n\n- **Speed:** t₁, and hence the latch delay, grows in proportion to C_P.\n- **Energy:** each cycle uses more energy, because C_P and C_Q are precharged to V_DD and discharged every cycle.\n- **Noise:** the input-referred noise of M1 and M2 falls. The longer integration window narrows the noise bandwidth, giving σ²_in ≈ 4kTγ/(g_m·t₁), which is proportional to kT/C_P.\n\nSo adding capacitance at P and Q trades speed and power for lower noise without changing the gain. To raise the gain itself, you must increase g_m/I_D, meaning a lower overdrive for M1 and M2. The threshold voltage also sets it, but the capacitance does not.",
        "format": "markdown",
        "sha256": "65c5f18e6dd9025cc7587d968ccab0d5800128d9db9fdd0f03941fd88c87d961"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is unchanged and shows the capacitance cancels: increased capacitance slows the discharge but proportionally lengthens the integration phase. Secondary comments do not undermine this result.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4806,
        "output_tokens": 42039,
        "total_tokens": 46845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41264,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4806,
        "output_tokens": 42039,
        "total_tokens": 46845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41264,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Answer: the speed degrades\n\nMaking M5 and M6 wider mostly adds capacitance at X and Y. It buys very little extra regeneration strength, so the latch gets slower.\n\n## Why\n\nAfter CK goes high, the decision time has three parts.\n\n**1. P and Q fall by V_THN** (M3–M6 off).\nt₁ ≈ C_P·V_THN /(I_CM/2). This part does not depend on M5 or M6.\n\n**2. X and Y fall from V_DD to V_DD − |V_THP|** (M3, M4 on; M5, M6 still off).\n\nt₂ ≈ C_X·|V_THP| / (I_CM/2)\n\n- In this interval M5 and M6 contribute no current, only load. Their drain-junction and overlap capacitances, plus the gate capacitance of the opposite device, add to C_X and C_Y. So t₂ grows roughly linearly with W₅,₆.\n- The extra time buys no extra signal. The differential voltage at the end of this phase is ΔV_XY ≈ g_m1·ΔV_in·t₂/C_X = [g_m1|V_THP|/(I_CM/2)]·ΔV_in. This does not depend on C_X. The regeneration starts with the same initial voltage, just later.\n\n**3. Regeneration.**\nτ_reg ≈ C_X /(g_m3,4 + g_m5,6), and t₃ ≈ τ_reg·ln(V_DD / 2ΔV_XY).\n\n- When regeneration begins, M5 and M6 have just reached |V_GS| ≈ |V_THP|. Their g_m is small, but their capacitance is already present. It grows further as they turn on, and the cross-coupled C_GD appears several times over in differential mode.\n- Even later, their transconductance per unit capacitance is poor. They are PMOS (lower mobility) with small overdrive, and g_m grows at best as √(W·I) while C grows as W. By contrast, M3 and M4 already carry the full branch current. Adding PMOS width therefore dilutes (g_m3 + g_m5)/C_X rather than improving it.\n- Once M5 and M6 turn on, they also inject current into X and Y. This fights M3 and M4 and slows the fall of the node that must trip the following SR latch or inverter.\n\n## Net effect\n\nt₂ definitely increases, and t₃ does not improve appreciably (it usually worsens). The total delay therefore rises.\n\nIn practice, M5 and M6 only need to be strong enough to restore the \"high\" side to V_DD, giving rail-to-rail output with no static current. So they are kept small. If they were tiny compared with a large fixed load at X and Y, a slight increase could help regeneration marginally, but that benefit is quickly outweighed.",
        "format": "markdown",
        "sha256": "c357224b9c507fec232f77fe15e553fc7d3059dd83b3a9e83079317f6b08d08f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies added parasitic capacitance as a real eventual limit, but concludes that widening degrades speed and claims the capacitance dominates. The key result is that stronger regeneration initially improves speed, with capacitance limiting the benefit only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 23395,
        "total_tokens": 28197,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22469,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 23395,
        "total_tokens": 28197,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22469,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Increasing W₅,₆ degrades the speed\n\nM5 and M6 are off for most of the evaluation. During that time they only add capacitance to X and Y. When they finally turn on, their extra transconductance does not outweigh that capacitance.\n\n## Phase by phase (after CK goes high)\n\n**1. P and Q discharge (M3–M6 off).** This phase is essentially unaffected.\n\n**2. X and Y discharge (M3, M4 on; M5, M6 still off).** X and Y must fall by |V_THP| before M5 and M6 turn on. Widening M5 and M6 increases the capacitance at each output node. Node X sees the drain junction and overlap capacitance of M5 plus the gate capacitance of M6 (M6's gate is tied to X), and Y sees the mirror image. So the duration of this phase grows in proportion to C_X:\n\n$$t_2 \\approx \\frac{C_X\\,|V_{THP}|}{I_{CM}/2}$$\n\nThe gain built up by the end of this phase does not depend on C_X:\n\n$$A_v \\approx \\frac{g_{m1,2}\\,|V_{THP}|}{I_{CM}/2}$$\n\nSo the extra delay buys no extra gain.\n\n**3. Regeneration (all of M3–M6 on).** The regeneration time constant is:\n\n$$\\tau_{reg} \\approx \\frac{C_X}{g_{m,n}+g_{m,p}}$$\n\nA larger W₅,₆ raises g_m,p, but it raises C_X roughly in proportion. Two things limit the benefit:\n- PMOS devices have lower mobility, so they provide less g_m per unit capacitance.\n- At the onset of regeneration, M5 and M6 are barely on (|V_GS| ≈ |V_THP|), so they contribute little g_m but all of their capacitance.\n\nAs a result, τ_reg improves little or even gets worse. As the PMOS devices come to dominate C_X, it tends toward the slower PMOS-limited value C_p/g_m,p.\n\n**Reset phase.** S3 and S4 must recharge the larger capacitances at X and Y back to V_DD, so the reset also takes longer.\n\n## Net result\n\nThe total decision time, roughly t₁ + t₂ + τ_reg·ln(ΔV_final/ΔV₀), increases.\n\nThis is why M5 and M6 are usually kept fairly small: just strong enough to restore the high output to V_DD and eliminate static current. Speed is better improved by strengthening M1–M4 or the tail current and by minimizing capacitance at X and Y.\n\nA wider PMOS pair can help only in a special case: when X and Y are dominated by a large external load, its added g_m then outweighs its own added capacitance. Separately, the larger C_X lengthens the integration time and slightly lowers input-referred noise. That is a noise-for-speed trade, not a speed gain.",
        "format": "markdown",
        "sha256": "43318e77135801207d54dcd334ee53e2a00a282f3eced762f69f5f8ee97402e8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the real competing effects—wider M5/M6 increase both regenerative transconductance and node capacitance—but gets the key initial trend wrong. Regeneration wins initially, with added capacitance limiting the benefit only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 12507,
        "total_tokens": 17309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 12507,
        "total_tokens": 17309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Wider M5 and M6 make the latch slower\n\nM5 and M6 add capacitance at X and Y during the part of the cycle when they do nothing useful. Their extra transconductance during regeneration does not make up for it.\n\n## 1. The interval when X and Y fall to V_DD − |V_THP|\n\nAfter CK goes high, P and Q fall first, then M3 and M4 turn on and X and Y discharge. Throughout this interval, M5 and M6 are off, because their V_SG is less than |V_THP|. Their only effect is extra capacitance at X and Y: drain junction and overlap capacitance of M5, plus gate capacitance of M6 (and the mirror case at Y).\n\nThe duration of this interval is\n\n  t₂ ≈ C_X |V_THP| / I_D1, with I_D1 ≈ I_D7/2.\n\nSo t₂ grows in direct proportion to C_X, and therefore with W₅,₆.\n\nThe extra capacitance buys no extra gain. The differential voltage at the end of this interval is\n\n  ΔV_XY ≈ (g_m1 ΔV_in / C_X) · t₂ = g_m1 |V_THP| ΔV_in / I_D1 ≈ [2|V_THP| / (V_GS − V_TH)₁,₂] · ΔV_in\n\nC_X cancels out. The larger capacitance only adds delay.\n\n## 2. Regeneration\n\nThe regeneration time constant is\n\n  τ_reg ≈ C_X / (g_m3,4 + g_m5,6)\n\nWider PMOS devices raise g_m5,6, but this helps little, for three reasons:\n\n- **Capacitance scales too.** The capacitance they add grows in proportion to W.\n- **Current is fixed.** The current in M5 and M6 is set by the tail device M7, not by their width. At fixed current, g_m grows only as √W, so g_m/C falls as the devices are widened.\n- **Late start.** M5 and M6 enter regeneration just barely on (|V_GS| ≈ |V_THP|), so their g_m is initially near zero while their capacitance is already fully present.\n\nAs a result, τ_reg improves only marginally. For large widths it gets worse, approaching the relatively poor g_m/C of a low-overdrive PMOS device.\n\n## Net result\n\nTotal delay increases. Two side penalties also appear:\n\n- S3 and S4 must precharge a larger capacitance during reset.\n- Energy per decision, roughly C_X·V_DD², goes up.\n\nFor this reason, M5 and M6 are usually kept fairly small. They only need to be strong enough to restore the winning output to V_DD and drive the following SR latch. Making them very small would slow that final pull-up, but beyond that minimum, more width hurts.",
        "format": "markdown",
        "sha256": "e12485742531bf9ab0959ab16cf3297de27d2c50abaabd0cc2db8ed63ea81756"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that wider M5/M6 add capacitance, a real eventual speed limit, but concludes that widening makes the latch slower from the outset. The golden answer says stronger regeneration initially wins, with degradation only beyond an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 19878,
        "total_tokens": 24680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18964,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 19878,
        "total_tokens": 24680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18964,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** Not monotonically. Widening the clocked transistors helps only while their on‑resistance dominates. Once they are roughly as wide as the data transistors (M1 and its PMOS partner), further widening degrades the speed.\n\n**Resistance: the benefit is limited**\n\nIn each half cycle, X (or Y) is charged or discharged through a two‑transistor stack: a clocked device in series with a data device. The total resistance is\n\nR ≈ R_clk + R_data\n\nWidening the clocked devices lowers only R_clk, so R approaches R_data. If the two devices were equal to begin with, the resistance can drop by at most a factor of two.\n\n**Capacitance: the cost keeps growing**\n\nThe clocked transistors are the ones tied directly to X and Y.\n\n* **Output loading:** Their drain junction and gate‑drain overlap capacitances add straight to C_X and C_Y. Both the clocked NMOS and the clocked PMOS load the node in every transition, but only one of them conducts the useful current.\n* **Internal nodes:** Their source capacitances enlarge the nodes between the clocked and data devices. When the clock turns the latch on, the internal node on the inactive side sits at the wrong level.\n  * For X falling, the node between the two PMOS devices is still at V_DD. It must be dragged down to about |V_THP| through the clocked NMOS and M1.\n  * For X rising, the node between the clocked NMOS and M1 sits at 0. It must be charged to about V_DD − V_THN.\n* **Same bottleneck:** This extra charge flows through the data transistor, which has not become any stronger.\n\n**Net effect on delay**\n\nWith R_clk ∝ 1/W and C ∝ W, the delay behaves roughly as\n\nt_d ∝ (a/W + R_data)(C₀ + bW) = aC₀/W + bR_data·W + const\n\nHere C₀ is the width‑independent part of the capacitance and b is the parasitic capacitance added per unit width. This expression has a minimum at W_opt ≈ √(aC₀ / (bR_data)).\n\nJunction and overlap capacitance per unit width is comparable to gate capacitance. So the optimum typically falls near W_clk ≈ W_data. Beyond that, the delay rises.\n\n**Secondary penalties**\n\n* Wider clocked devices load the clock (VCO or buffer) more heavily, which slows the clock edges.\n* They also increase clock feedthrough and charge injection onto X and Y.\n\nBoth effects further limit the maximum operating frequency. So you cannot speed up this divider simply by making the clocked transistors wider; there is an optimum size.",
        "format": "markdown",
        "sha256": "376c94d9b49c63873fb276a6c4936c0e03dd000ba23dfd8c252baa4268cf5316"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing the clocked devices’ on-resistance, while added capacitance eventually limits or reverses the benefit, producing an optimum.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2222,
        "output_tokens": 34175,
        "total_tokens": 36397,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33296,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2222,
        "output_tokens": 34175,
        "total_tokens": 36397,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33296,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Answer: making the clocked transistors wider helps only while they are small. Once they are about as wide as the data transistors, further widening degrades the speed.**\n\n**1. The resistance gain saturates.**\n- In the sense mode, X (or Y) is charged or discharged through a two-transistor stack: a data device (M1 or its PMOS partner) in series with a clocked device.\n- Widening the clocked device lowers only its own on-resistance. The data device's resistance stays the same.\n- The data devices cannot be widened freely, because they load the preceding stage (X drives the second latch, Z drives the first).\n- So the stack resistance falls toward R_data and stops there.\n\n**2. The capacitance keeps growing, and it sits on the critical nodes.**\n- The clocked devices connect directly to X and Y.\n- Their drain-junction and gate–drain overlap capacitances add to C_X and C_Y.\n- During sensing they are on with their gates at a fixed rail. As X or Y moves, their channel charge must change, so much of their gate capacitance also loads X and Y.\n- Their source junctions add capacitance at the internal stack nodes. One internal node is pre-set to the helpful voltage during hold, but the other is not, so these effects roughly cancel.\n- The net self-loading therefore grows roughly linearly with W.\n\nA simple estimate of the delay is:\n\nτ ≈ (R_D + R₀/W_c)(C_L + C₀W_c)\n\nHere R_D is the data device's resistance, R₀/W_c is the clocked device's resistance, C_L is the external load, and C₀W_c is the clocked devices' self-capacitance.\n\nThis has a minimum at:\n\nW_c,opt = √(R₀C_L / (R_D C₀))\n\nWith typical numbers (the next stage's gate load is comparable to the clocked devices' self-capacitance at equal width), this puts the optimum roughly at W_clk ≈ W_data. Beyond that point, the added capacitance outweighs the reduced resistance and the latch slows down.\n\n**3. Clock-side penalties.**\nLarger clocked gates load the CK/CK̄ drivers (or the VCO). This causes:\n- slower clock edges, which delay the moment each latch actually becomes transparent;\n- more CK/CK̄ overlap, which raises the race risk in C²MOS;\n- more clock power;\n- more clock feedthrough onto X and Y.\n\nWith a realistic clock source, these effects lower the divider's maximum toggle rate further.\n\nSo widening the clocked transistors improves speed only if they were undersized. Otherwise it degrades speed, which is why they are typically sized comparable to the data transistors.",
        "format": "markdown",
        "sha256": "7e18b4345559ed2a8033ebf52316c90368d9b975d1673b6dbffa5534cd549dda"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the required trend: widening initially lowers the clocked devices’ on-resistance, while added capacitance at X/Y eventually limits or reverses the speed benefit. The specific estimate of the optimum width is extra detail and does not change the essential answer.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2222,
        "output_tokens": 24343,
        "total_tokens": 26565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23462,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2222,
        "output_tokens": 24343,
        "total_tokens": 26565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23462,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Speed improves only marginally at first, then degrades\n\nThere is a small optimum near equal sizing of the clocked and data transistors. Beyond it, wider clocked transistors make the divider slower.\n\n## Why it helps a little\n\nEach output (X or Y) is charged or discharged through a two-transistor stack: a data transistor (gate driven by Z or X) in series with a clocked transistor. Widening the clocked transistor lowers its on-resistance, so the stack delivers more current.\n\nThis benefit is bounded. Even with an infinitely wide clocked device, the stack resistance only falls to that of the data transistor alone. That is at most a 2× improvement, and less in short-channel devices, where velocity saturation already makes the stacking penalty smaller than 2×.\n\n## Why it hurts\n\nIn this topology the clocked transistors connect directly to X and Y. Widening them adds capacitance to these nodes, and this grows linearly with width:\n\n- drain junction capacitance,\n- gate–drain overlap capacitance to CK or CK̄,\n- part of the channel capacitance when the device is in triode.\n\nThis capacitance adds to the node's existing load. At X, that load is the gate capacitance of the second latch's data transistors. At Y, it is the input of Inv3. The intermediate nodes between each data and clocked transistor also become larger.\n\n## A simple model\n\nLet R_D be the data transistor's resistance, R_C ∝ 1/W_C the clocked transistor's resistance, C_in the next stage's gate capacitance, and γ the junction-plus-overlap capacitance per unit width. Then\n\nτ ≈ (R_D + R_C)(C_in + γW_C) = const + bW_C + c/W_C.\n\nThis has a minimum at W_C/W_D ≈ √(C_G/C_DB), which is roughly 1 to 1.5 in practice.\n\nAs an example, start with equal widths and assume the clocked drains add 0.5 C_in at X:\n\n| W_C / W_D | Stack resistance | C_X | τ (in R·C_in) |\n|---|---|---|---|\n| 1 | 2R | 1.5 C_in | 3.0 |\n| 1.4 | 1.7R | 1.7 C_in | 2.9 (about 3% better) |\n| 2 | 1.5R | 2.0 C_in | 3.0 (no gain) |\n| 4 | 1.25R | 3.0 C_in | 3.75 (slower) |\n\n## Additional penalties\n\n- The CK and CK̄ drivers must drive larger gates, so with a finite clock source the edges slow down. The clocked devices then turn on later. C2MOS's tolerance to clock skew and overlap also depends on sharp edges.\n- Clock feedthrough into X and Y grows through the larger overlap capacitances.\n- Clock power rises.\n\n**Conclusion:** Making the clocked transistors wider gives essentially no meaningful speed gain beyond roughly equal sizing. Further widening degrades the speed and increases power.",
        "format": "markdown",
        "sha256": "692e7707af54bcd6cbfb9cdf8a22b22d7d9d6b6a0bf393bf8607c437aec915aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the required trend: widening the clocked devices initially reduces their on-resistance and improves speed, while added latch-node capacitance eventually limits or reverses the benefit. The specific optimum-size estimates are secondary.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2222,
        "output_tokens": 31086,
        "total_tokens": 33308,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2222,
        "output_tokens": 31086,
        "total_tokens": 33308,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Yes. X and Y (and Z) are in quadrature.\n\n## How it works\n\n- **Left clocked inverter.** CK drives its NMOS and CK̄ drives its PMOS, so it is transparent when CK = 1 and holds when CK = 0. In transparent mode, X = Z̄. X can therefore change only just after **rising** edges of CK.\n- **Right clocked inverter.** CK̄ drives its NMOS and CK drives its PMOS, so it is transparent when CK = 0. In transparent mode, Y = X̄. Y can change only just after **falling** edges of CK.\n- **Inv3** gives Z = Ȳ. The loop has three inversions, so every node toggles once per CK period. Each node therefore has a period of 2T_CK and, ideally, a 50% duty cycle.\n\n```\nCK  ‾‾‾|___|‾‾‾|___|‾‾‾|___|‾‾‾|___\nX   ‾‾‾‾‾‾‾|_______|‾‾‾‾‾‾‾|_______    toggles on CK rising edges\nY   ‾‾‾|_______|‾‾‾‾‾‾‾|_______|‾‾‾    toggles on CK falling edges\nZ   ___|‾‾‾‾‾‾‾|_______|‾‾‾‾‾‾‾|___    = Ȳ (plus Inv3 delay)\n```\n\nThe transitions of X and Y are separated by T_CK/2. That is one quarter of the output period (2T_CK), which is 90°. Relative to X:\n\n- Y leads by 90°.\n- Z lags by 90°.\n\nSo three of the four quadrature phases are available. The 180° phase (X̄) would require an extra inverter. All outputs are single-ended.\n\n## Limits on quadrature accuracy\n\n- **Clock duty cycle.** The X-to-Y separation equals the CK high time, so the phase difference is about 180° × D, where D is the CK duty cycle. For example, D = 45% gives about 81°. X and Y each stay near 50% duty cycle, but their relative phase does not.\n- **Inv3 delay.** Z is late by t_Inv3, adding a phase error of about 180°·t_Inv3/T_CK. With T_CK = 100 ps and t_Inv3 = 10 ps, that is about 18°. X and Y are the better I/Q pair, because X is retimed by CK and does not inherit Inv3's delay, as long as Z settles before the next CK edge.\n- **Matching.** The two stages need matched clock-to-output delays and equal loading on X and Y. CK and CK̄ must be truly complementary. Rise/fall asymmetry between the PMOS and NMOS stacks distorts the edges.\n- **Buffering.** X and Y float during their hold phases. They should be buffered with identical buffers before driving a load such as a mixer.",
        "format": "markdown",
        "sha256": "23674b9be81dfcfc6feb404de19b7dbccefa98613f7b10ce8beb95f062f6afb0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the opposite-edge C2MOS latches as a divide-by-two giving nominal quadrature, and cites both Inv3 delay and load matching as limits on accuracy.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2203,
        "output_tokens": 16146,
        "total_tokens": 18349,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15183,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2203,
        "output_tokens": 16146,
        "total_tokens": 18349,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15183,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Yes, nominally\n\nNodes **X** and **Y** are 90° apart. So are X and Z, because Z = Ȳ.\n\n## Why\n\n- **Left C²MOS stage:** its NMOS is clocked by CK and its PMOS by CK̄. It acts as an inverter (X = Z̄) when CK = 1 and floats, holding X, when CK = 0.\n- **Right stage:** the clocks are swapped. It inverts (Y = X̄) when CK = 0 and holds Y when CK = 1.\n- **Inv3:** it supplies the net inversion around the loop, so the circuit is a master–slave toggle, i.e., a divide-by-2.\n\nThe timing follows from which stage is holding:\n\n- While CK is high, Y is frozen, so Z is constant. X therefore changes only once, just after CK rises.\n- While CK is low, X is frozen. Y (and Z) therefore change only once, just after CK falls.\n\n```\nCK   ‾‾‾___‾‾‾___‾‾‾___‾‾‾___\nX    ‾‾‾‾‾‾______‾‾‾‾‾‾______    (toggles on CK↑)\nY    ‾‾‾______‾‾‾‾‾‾______‾‾‾    (toggles on CK↓)\nZ    ___‾‾‾‾‾‾______‾‾‾‾‾‾___    (= Ȳ)\n```\n\nEach node has a period of 2T_CK and a 50% duty cycle. The X and Y transitions are offset by T_CK/2, which is one quarter of the output period, or 90°.\n\nIn terms of fundamentals, X ∝ cos ωt, Z ∝ sin ωt and Y ∝ −sin ωt, with ω = ω_CK/2. You get I, Q and Q̄. X̄ is not available unless you add another inverter.\n\n## Caveats on accuracy\n\n1. **Clock duty cycle.** X moves on CK↑ and Z on CK↓, so the X–Z phase is really 180°·D, where D is the CK duty cycle. A 45% duty cycle gives 81° instead of 90°.\n2. **CK/CK̄ skew.** Rising and falling transitions are triggered by different clock phases. For example, X rises when CK̄ falls but falls when CK rises. Any skew between CK and CK̄ therefore shows up as phase and duty-cycle error.\n3. **Delay mismatch.** X and Y come from different stages with different loads: X drives the stage-2 gates, while Y drives Inv3. Rising and falling edges also come from PMOS versus NMOS stacks. Z carries an extra Inv3 delay, so the X–Z pair is less accurate than X–Y.\n4. **High frequency.** If the stage-2 plus Inv3 delay approaches T_CK/2, Z is not settled when CK rises. X then transitions late and the phase drifts away from 90°, even before the divider fails.\n5. **Dynamic nodes.** X and Y float for half of each cycle, so they need matched buffers before driving loads such as mixers.\n\nIn short, the circuit is a single-ended quadrature divider. Its accuracy is set mainly by the clock duty cycle, CK/CK̄ skew and mismatch between the stage delays.",
        "format": "markdown",
        "sha256": "5a81fde0ed87a0df45d1af2b7514d4198b057a1ee38c9c9bb91eeb933acf8875"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from opposite-edge latch switching and explains both key departures from exact quadrature: Inv3 delay and unequal loading of the latch outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2203,
        "output_tokens": 16760,
        "total_tokens": 18963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2203,
        "output_tokens": 16760,
        "total_tokens": 18963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** Nodes X and Y are 90° apart. X and Z are nearly in quadrature, but Z carries Inv3's extra delay.\n\n**Why**\n\nEach C²MOS stage is an inverting dynamic latch:\n\n- **Stage 1** (input Z, output X) has CK on its NMOS and CK̄ on its PMOS. It is transparent when CK is high and holds when CK is low.\n- **Stage 2** (input X, output Y) has the clocks swapped. It is transparent when CK is low and holds when CK is high.\n- **Inv3** gives Z = Ȳ. With three inversions around the loop, the feedback is negative, so the circuit divides by two.\n\nWhile stage 1 is transparent, stage 2 is holding, so Z is constant. X therefore changes only once, just after each **rising** edge of CK. By the same argument, Y changes only just after each **falling** edge.\n\n| CK phase | 1 | 0 | 1 | 0 | 1 | 0 |\n|---|---|---|---|---|---|---|\n| X | 0 | 0 | 1 | 1 | 0 | 0 |\n| Y | 0 | 1 | 1 | 0 | 0 | 1 |\n| Z | 1 | 0 | 0 | 1 | 1 | 0 |\n\nEach node toggles once per clock period, so its period is 2T_CK. X and Y are offset by T_CK/2, which is one quarter of the output period, or 90°. Y leads X by 90°, and Z lags X by 90°.\n\n**Caveats on accuracy**\n\n1. **Clock duty cycle.** The X-to-Y spacing equals the CK high time, so the phase difference is 180° × (duty cycle). A 45% duty cycle gives about 81°. Each output still keeps roughly a 50% duty cycle, because each toggles on only one type of edge.\n2. **Clock skew and latch mismatch.** CK/CK̄ skew, or unequal latch delays, shift the edges directly. X drives stage 2's input pair while Y drives Inv3, so sizing Inv3 like the latch input devices helps equalize the loads.\n3. **Using Z instead of Y.** Z is Ȳ delayed by Inv3, so the pair (X, Z) has an extra error of about 180° × t_inv / T_CK. It is better to take X and Y as the I/Q pair.",
        "format": "markdown",
        "sha256": "7261023a438d4a73b93c6a52f9b00e7caadc96006e5b5f6c3451ad580af652cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the opposite-phase latches and notes both departures from exact quadrature: Inv3 delay and unequal loading of the latch outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2203,
        "output_tokens": 13929,
        "total_tokens": 16132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13136,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2203,
        "output_tokens": 13929,
        "total_tokens": 16132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13136,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The speed improves**, though with diminishing returns and some costs.\n\n**Why it improves**\n\nWhen a latch is transparent, its output is charged or discharged through a two-transistor stack: the clocked device plus the data device. Widening the clocked devices lowers their on-resistance, so the stack delivers more current. Because they sit next to the rails, widening them adds little load to the data path:\n\n- Their gates are driven by CK/CK̄, not by the preceding latch. So no extra capacitance is placed on the latch outputs or on the inverter output.\n- Their drain capacitance appears at the internal node between the clocked and data transistors, not at the latch output. That internal node is charged and discharged through the clocked transistor itself.\n\nA simple Elmore estimate for one latch shows this:\n\nτ ≈ R_clk (C_int + C_out) + R_data · C_out\n\n- C_out = data-device junctions + next-stage gates. It does not depend on W_clk.\n- If W_clk is scaled by k, then R_clk → R_clk/k and C_int grows roughly ∝ k.\n- The product R_clk · C_int stays about constant (it is the device's intrinsic RC).\n- The term R_clk · C_out falls as 1/k.\n\nSo τ decreases monotonically toward about R_data · C_out. The clock-to-output delay drops and the maximum input frequency rises. If the clocked devices were instead adjacent to the output, their extra drain capacitance would load the output directly and the benefit would be much smaller.\n\n**Limits and costs**\n\n- **Diminishing returns:** once R_clk ≪ R_data, the data transistors set the current. Little is gained beyond roughly 2–3× the data-device width.\n- **Clock loading:** the CK/CK̄ drivers (or the VCO) must drive more gate capacitance, which costs power. If the drivers are not upsized, the clock edges slow down, and this can cancel the gain.\n- **Charge sharing and leakage:** each latch's input changes while that latch is opaque. The data device that turns on then connects the floating output to a larger internal-node capacitance, which disturbs the stored level. Wider off-state clocked devices also leak more, which raises the minimum operating frequency.",
        "format": "markdown",
        "sha256": "93d8d8cd405dcb1da3ddd87f58dde97135955944d247d4fb88937e267b46b5e5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening the clocked devices improves speed by reducing series resistance while adding little load to the output path. It also recognizes charge sharing as a swing-degrading cost without treating it as catastrophic; the added caveats do not change the main conclusion.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 50509,
        "total_tokens": 52794,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 49779,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 50509,
        "total_tokens": 52794,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 49779,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer: the speed improves.** There are diminishing returns, and there is a practical upper limit set by clock loading and charge sharing.\n\n**Why it improves**\n\n- **Lower stack resistance.** When a latch is transparent, its output (X or Y) is charged or discharged through a two‑transistor stack: the clocked device in series with the data device. A wider clocked device has lower on‑resistance. It also holds the internal node firmly at V_DD or ground, so the data transistor no longer suffers source degeneration or body effect. More current is available for the output node.\n\n- **No added load on the signal path.** The clocked devices sit at the outer, rail‑side positions of each stack.\n  - Their gates are driven by CK and CK̄, not by X, Y, or the inverter output.\n  - Their drains connect only to the internal nodes, not to X or Y.\n  \n  So the capacitance at every node in the data loop is unchanged: X, Y, and the feedback node still see only the data transistors and the inverter.\n\n- **The extra internal capacitance is essentially free.** The added junction capacitance at an internal node is charged by the clocked device itself. That device's own RC is roughly independent of width, since R ∝ 1/W and C ∝ W. In Elmore terms:\n\n  τ ≈ R_c(C_int + C_out) + R_d·C_out = const + (r/W_c)(C_out + …) + R_d·C_out\n\n  This falls monotonically toward R_d·C_out as W_c increases.\n\n**Costs and limits**\n\n1. **Diminishing returns.** Once R_c is much smaller than R_d, the delay is set by the data transistors.\n\n2. **Heavier clock load.** The CK and CK̄ drivers see more capacitance, which costs power. With a fixed clock buffer, the clock edges slow down, which eats into the gain.\n\n3. **More charge sharing.** In this divider, each latch's input toggles while that latch is in hold mode. Consider the first latch holding X = 1:\n   - The feedback input rises and turns on its data NMOS.\n   - That NMOS connects X to the internal node above the bottom clocked NMOS, which was left at 0 V.\n   - X drops by about V_DD·C_int/(C_int + C_X).\n   \n   The disturbance passes through the transparent latch and around the loop, opposing the intended transitions. If the clocked devices are made so wide that C_int becomes comparable to C_X or C_Y, the stored levels are corrupted. In the extreme, the internal nodes act like supply rails, the latches never really hold, and the loop of three inversions behaves like a ring oscillator instead of a divider.",
        "format": "markdown",
        "sha256": "a6ae9a7daf848df7481235e793980570cffac8dfe93221303a2950133ca95616"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening the clocked devices improves speed by reducing series resistance without significantly loading the outputs, and identifies charge sharing as a practical limit. This meets the full-credit rule.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 49950,
        "total_tokens": 52235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 49079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 49950,
        "total_tokens": 52235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 49079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The speed improves, with diminishing returns.**\n\n**Why it helps**\n\n1. **The clocked devices add no load to the signal path.** Their gates are driven by CK and CK̄, so the preceding latch and the inverter do not see them.\n2. **Their drains sit at internal stack nodes, not at the outputs.** The clocked devices are placed next to VDD and ground, so their drain capacitance appears only at the internal nodes between the clocked and data transistors. Each latch output is loaded only by the drains of its data transistors and the gates of the next stage. Widening the clocked devices leaves this output load unchanged.\n3. **Each output charges or discharges through a two-transistor stack.** Wider clocked devices lower the series resistance. They also hold the data transistors' sources closer to the rails, giving more V_GS and less body effect. So more current flows into the same output capacitance, and each transition is faster.\n\nA simple Elmore estimate shows the trend:\n\nτ ≈ R_c(C_X + C_out) + R_d·C_out\n\n- R_c and R_d are the on-resistances of the clocked and data devices.\n- C_X is the internal-node capacitance and C_out is the output load.\n- R_c scales as 1/W_c, while C_X scales roughly as W_c, so R_c·C_X stays about constant.\n- The R_c·C_out term keeps shrinking.\n\nThe delay therefore falls monotonically, flattening toward roughly R_d·C_out. Once R_c is much smaller than R_d, the data transistors limit the speed and further widening buys little.\n\n**What it costs**\n\n- **Clock loading.** Clock power and the load on the clock source (VCO or buffers) rise. If the clock driver is not scaled up, the clock edges slow down. C²MOS tolerates CK/CK̄ overlap only with sharp edges, so slow edges can erode the gain.\n- **Charge sharing.** In this divider, each latch's input changes while that latch is opaque. The output then shares charge with the internal node.\n  - Example: the output is held high, the input rises, and the node between the NMOS devices sits at 0.\n  - The output droops by about VDD·C_X/(C_X + C_out).\n  - A wider clocked device means a larger C_X and a larger disturbance of the stored levels and of the other latch.\n\nSo the widths cannot be increased indefinitely.\n\nIf the clocked transistors were instead placed next to the output nodes, their drain capacitance would load the outputs. Widening them would then become a trade-off that eventually degrades speed.",
        "format": "markdown",
        "sha256": "0704732155a18481af7ace5c9ccb77a4d50d47a2e0b49b8228a2e9ecb849697e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening improves speed by lowering series resistance without significantly loading the outputs, and identifies charge sharing as a limit on further widening.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 37715,
        "total_tokens": 40000,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36878,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 37715,
        "total_tokens": 40000,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36878,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis: A Dynamic Divide-by-Two Circuit\n\n**Node labels** (left to right):\n\n`Q̄ → S1(CK) → X → Inv1 → Y → S2(CK̄) → Z → Inv2 → Q → Inv3 → Q̄ (fed back to S1)`\n\n## What it is\n\n- **S1 + Inv1** form a dynamic latch. It is transparent when CK = 1. When CK = 0, it holds its state as charge on Inv1's gate capacitance (node X). This is the **master**.\n- **S2 + Inv2** form the same latch on the opposite phase. This is the **slave**.\n- Together they make a two-phase dynamic master–slave D flip-flop. It is non-inverting from S1's input to Q (two inversions) and updates on the **falling edge of CK**.\n- **Inv3** produces $\\overline{Q}$ and feeds it back to the D input. A flip-flop with $D=\\overline{Q}$ is a **toggle flip-flop, i.e., a divide-by-2**.\n\n## Operation\n\n- **CK = 1:** S1 is on and S2 is off. X tracks $\\overline{Q}$, so Y = Q. Z floats, so Q and $\\overline{Q}$ stay frozen. The signal path dead-ends at the open S2.\n- **CK = 0:** S1 is off, so X (and therefore Y) holds the old Q. S2 is on, so Z ← Y and Q flips. The new $\\overline{Q}$ dead-ends at the open S1, so it cannot race around the loop.\n\n| Phase | S1 | S2 | X | Y | Z | Q | Q̄ |\n|---|---|---|---|---|---|---|---|\n| CK=1 | on | off | 1 | 0 | 1* | 0 | 1 |\n| CK=0 | off | on | 1* | 0 | 0 | 1 | 0 |\n| CK=1 | on | off | 0 | 1 | 0* | 1 | 0 |\n| CK=0 | off | on | 0* | 1 | 1 | 0 | 1 |\n\n\\* value held on the floating node capacitance\n\nEvery node completes one cycle in four half-periods, so $f_{out}=f_{CK}/2$.\n\n## Key observations\n\n**1. An odd-inversion loop that doesn't oscillate.**\n- The two switches are never on together, so the loop is never closed.\n- The odd inversion count is exactly what forces a toggle each cycle. Without Inv3, the same bit would simply be recirculated (refreshed) forever.\n- A useful picture: this is a 3-stage ring oscillator cut in half by the switches. In each phase, the wavefront can advance only to the next open switch. It therefore circulates once per clock period, and each node flips once per $T_{CK}$.\n\n**2. Output waveforms.**\n- Each node always toggles on the same kind of clock edge, so all outputs have a **50% duty cycle**, even if CK does not.\n- X and Y change after rising edges of CK. Z, Q and $\\overline{Q}$ change after falling edges.\n- The two groups are offset by $T_{CK}/2$, which is 90° of the output. So Y and Q are **quadrature outputs**, provided the clock duty cycle is 50% and the Inv1/Inv2 delays match.\n\n**3. Maximum speed.**\n- In one clock period, the transition must pass through S2, Inv2, Inv3, S1 and Inv1:\n  $$T_{CK}\\gtrsim 3t_{inv}+2t_{sw},\\qquad t_{sw}\\approx R_{on}C_{in}$$\n- With both switches on, the circuit would be a ring oscillating at $f_{osc}=1/[2(3t_{inv}+2t_{sw})]$.\n- Hence $f_{CK,max}\\approx 2f_{osc}$. At top speed, the divider output runs at the ring's natural frequency.\n\n**4. Minimum speed (leakage).**\n- X and Z float for half of each period.\n- The far terminal of each off switch is always at the *complement* of the stored value, since it is three inversions away. So the full $V_{DD}$ appears across the off switch, and its leakage always pulls the stored node toward the wrong state.\n- The requirement is $T_{CK}/2 \\ll C_{node}(V_{DD}/2)/I_{leak}$.\n- Example: with 1 fF, 1 nA and 1 V, the hold time is about 0.5 µs, so $f_{CK}$ must be well above about 1 MHz.\n- If the clock is slower, the node drifts toward the inverter's trip point. The inverters then draw crowbar current and the circuit toggles incorrectly.\n\n**5. Clock overlap (race-through).**\n- If CK and $\\overline{CK}$ are high at the same time, the loop closes into a ring oscillator, and the state may flip more than once.\n- **CK rising edge (critical):** if S2 is still on, the new X passes through Inv1 and S2 and corrupts Z after only about $t_{inv}+2t_{sw}$.\n- **CK falling edge:** the race path (Inv2, Inv3) is about $2t_{inv}+2t_{sw}$, so this edge is more tolerant.\n- A non-overlap gap (both switches off) is harmless.\n- Remedy: use non-overlapping clocks, or derive CK from $\\overline{CK}$ rather than the reverse. This moves the inherent one-gate overlap to the tolerant edge.\n\n**6. Practical notes.**\n- The circuit needs **rail-to-rail clocks**.\n- Use transmission gates. An NMOS-only switch passes only $V_{DD}-V_{TH}$, which causes static current in Inv1/Inv2.\n- Charge injection and clock feedthrough disturb X and Z. This is tolerable because each node is followed by a restoring inverter, but these nodes are noise-sensitive and must not be loaded.\n- Take the output from Q, $\\overline{Q}$ or Y. Any load there adds to the loop delay.\n- Power is purely dynamic: about $\\Sigma C\\,V_{DD}^2 f_{CK}/2$ for the internal nodes, plus the clock-line power.\n\n**Bottom line:** two complementary-clocked switches turn a 3-inverter ring into a compact, low-power dynamic ÷2. It provides 50%-duty-cycle, nearly quadrature outputs. It works between a leakage-set lower frequency limit and an upper limit of about $2f_{osc}$, provided clock overlap is kept small.",
        "format": "markdown",
        "sha256": "f1705d164784c8c71eef37fc19139f7377cc9b3fd1defcc873da5186202fbb7f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic master–slave divide-by-two; the golden solution explicitly awards full credit for this, with detailed timing and internal-path claims not required.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1433,
        "output_tokens": 44810,
        "total_tokens": 46243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42602,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1433,
        "output_tokens": 44810,
        "total_tokens": 46243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42602,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis: a dynamic divide-by-two built from a three-inverter ring\n\n## 1. What the circuit is\n\nRemove the two switches and you have a **three-stage ring oscillator**. The switches are driven by complementary clocks, so the loop is never closed:\n\n- **S1 (CK) + Inv1** forms a dynamic latch. Inv1's input capacitance is the storage element. The latch is transparent when CK = 1 (the master).\n- **S2 ($\\overline{CK}$) + Inv2** forms a second dynamic latch, transparent when CK = 0 (the slave).\n\nThe master and slave together make a negative-edge-triggered D flip-flop. Inv3 adds one more inversion, so the flip-flop's output is fed back to its input complemented (Q̄ → D). The result is a **toggle flip-flop, i.e., a dynamic ÷2 circuit.**\n\n## 2. Operation\n\nNode labels used below:\n- **A**: Inv1 input\n- **B**: Inv1 output\n- **C**: Inv2 input\n- **D**: Inv2 output\n- **E**: Inv3 output, fed back to S1\n\n**CK = 1 (S1 on, S2 off):**\n- C floats and holds its value on Inv2's gate capacitance, so D and E are frozen.\n- A copies E, and Inv1 produces B = Ē.\n- Since E cannot change in this phase, nothing races around the loop.\n\n**CK = 0 (S1 off, S2 on):**\n- A floats, so B is frozen at the complement of the old E.\n- C copies B, and the change ripples through Inv2 and Inv3, giving E_new = NOT E_old.\n\n| Half-period | CK | A | B | C | D | E |\n|---|---|---|---|---|---|---|\n| 1 | 1 | 0 | 1 | 0 (held) | 1 | 0 |\n| 2 | 0 | 0 (held) | 1 | 1 | 0 | 1 |\n| 3 | 1 | 1 | 0 | 1 (held) | 0 | 1 |\n| 4 | 0 | 1 (held) | 0 | 0 | 1 | 0 |\n| 5 | 1 | repeats half-period 1 | | | | |\n\nEvery node toggles once per clock period, so **f_out = f_CK/2**.\n\n## 3. Output properties\n\n- **Self-starting.** The state is a single bit, so any power-up state is legal. The output has an inherent 180° phase ambiguity.\n- **50% duty cycle, independent of the CK duty cycle.** A and B toggle only on CK↑; C, D and E toggle only on CK↓, each a fixed delay after its edge. The only error comes from rise/fall delay asymmetry.\n- **Quadrature outputs.**\n  - B and D are each one switch plus one inverter delay after their triggering edges.\n  - Those edges are separated by the CK low (or high) time. For a 50% clock, B lags D by T_CK/2, which is 90° at f_CK/2. This is useful for I/Q LO generation.\n  - The phase error is about 180° × (duty-cycle error), plus any load mismatch between B and D.\n- **The number of inverters must be odd.** With two inverters the loop is non-inverting, and the circuit merely holds its state.\n\n## 4. Speed limits\n\n**Maximum frequency.** An edge launched at CK↓ must traverse S2, Inv2, Inv3, S1 and Inv1 before the next CK↓. Because the latches are transparent, delay can be borrowed from one half-period into the other:\n\n$$T_{CK} \\gtrsim 3t_{inv} + 2t_{sw}$$\n\nHolding both switches on gives the parent ring, with $T_{osc} = 2(3t_{inv}+2t_{sw})$. Therefore:\n- f_CK,max ≈ 2·f_osc, and f_out,max ≈ f_osc.\n- The divider can never run faster than its parent ring oscillates.\n- Below this limit, the edge simply waits at an open switch for the clock. That waiting is what turns a free-running ring into a clocked divider.\n\n**Minimum frequency (dynamic storage).**\n- A floats during CK = 0, and C floats during CK = 1. Leakage drifts these stored voltages: subthreshold current through the off switch, junction leakage, and gate leakage.\n- The drift is always in the destructive direction. While S1 is off, E has already become Ā; while S2 is off, B = C̄.\n- This requires\n\n$$\\frac{I_{leak}\\,T_{CK}/2}{C_{store}} < \\Delta V_{max} \\;\\Rightarrow\\; f_{CK,min}\\approx \\frac{I_{leak}}{2C_{store}\\Delta V_{max}}$$\n\n- A drooping input also puts an inverter into crowbar (short-circuit) current. The clock therefore cannot be stopped unless keepers are added.\n\n## 5. Practical issues\n\n- **Clock overlap.** If both switches conduct at once, the loop briefly becomes a ring. The shortest race path is E→S1→Inv1→S2→C at CK↑, so the overlap must stay below about t_inv + 2t_sw. Non-overlap gaps are harmless.\n- **Switch implementation.**\n  - A single NMOS switch passes only V_DD − V_TH. This leaves the inverter PMOS partially on, causing static current, lower noise margin, and slower operation.\n  - Transmission gates, clocked (C²MOS) inverters, or a TSPC version avoid this.\n- **Charge injection, clock feedthrough and kickback.** These disturb the tiny storage nodes and cause glitches on B and E at the clock edges. They do not affect the count, but they matter for clean I/Q signals.\n- **Power.** Consumption is purely dynamic, roughly ΣC·V_DD²·f_out plus the clock power. There is no static current, and the clock drives only the switch gates.\n- **Jitter.** Each edge is retimed by CK, so jitter does not accumulate as it would in the free-running ring.\n\n**Bottom line:** the circuit is a three-stage ring \"tamed\" by two complementary switches. It forms a dynamic master–slave toggle flip-flop that divides by two and delivers 50%-duty-cycle and quadrature outputs. It works from a leakage-set minimum frequency up to roughly twice the parent ring's oscillation frequency.",
        "format": "markdown",
        "sha256": "312f30c57ca52ee2d1a29cdf1c7499c279383831001536d611a94283fcd989b1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a divide-by-two built from dynamic latches (a dynamic master–slave toggle divider), which satisfies the full-credit rule. The additional implementation details are not required.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1433,
        "output_tokens": 43950,
        "total_tokens": 45383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41796,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1433,
        "output_tokens": 43950,
        "total_tokens": 45383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41796,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# A Dynamic Divide-by-2 Circuit\n\n**Result:** each switch–inverter pair is a dynamic latch. When the switch is on, the inverter follows its input. When the switch turns off, the inverter holds that value on its own gate capacitance.\n\n- S1 (driven by CK) with Inv1 is the master latch.\n- S2 (driven by CK̄) with Inv2 is the slave latch.\n- Together they form a master–slave flip-flop that triggers on the falling edge of CK.\n- Inv3 feeds the complement of the flip-flop output back to its input (D = Q̄).\n\nSo the circuit is a toggle flip-flop. Every node runs at **f_CK/2**.\n\n## Operation\n\nNode labels:\n- A = Inv1 input\n- B = Inv1 output\n- C = Inv2 input\n- D = Inv2 output\n- E = Inv3 output, fed back through S1\n\nA and C are the dynamic nodes, which float when their switch is off.\n\n**CK high (S1 on, S2 off):**\n- C floats and holds its value, so D = C̄ and E = C.\n- A follows E, so B = C̄. The master has prepared the complement of the stored bit.\n- S2 is off, so this new value cannot reach the slave yet.\n\n**CK low (S1 off, S2 on):**\n- A holds its value, so B stays at C̄.\n- S2 copies B to C, so C toggles. D and E follow.\n- The new E cannot pass through S1 because it is off.\n\nStarting from C = 0 (* = value held on gate capacitance):\n\n| Half-cycle | CK | A | B | C | D | E |\n|---|---|---|---|---|---|---|\n| 1 | 1 | 0 | 1 | 0* | 1 | 0 |\n| 2 | 0 | 0* | 1 | 1 | 0 | 1 |\n| 3 | 1 | 1 | 0 | 1* | 0 | 1 |\n| 4 | 0 | 1* | 0 | 0 | 1 | 0 |\n| 5 | 1 | 0 | 1 | 0* | 1 | 0 (same as 1) |\n\nThe state repeats every 4 half-cycles, which is 2T_CK. So each node runs at f_CK/2.\n\n**Ring-oscillator view:** the loop is a 3-inverter ring, but one switch is always open, so it can never free-run.\n- While CK is low, a transition moves B→C→D→E and stops at S1.\n- While CK is high, it moves E→A→B and stops at S2.\n- So the transition makes exactly one lap per clock period.\n- The ring has a net inversion, so two laps are needed to restore each node. This gives an output period of 2T_CK.\n\n## Waveforms (ideal, zero delay)\n\n```\n          ____     ___     ___     ___\nCK            |___|   |___|   |___|   |___\n               _______         _______\nC, E      ____|       |_______|       |___\n                   _______         _______\nA         ________|       |_______|\n```\nHere B = Ā and D = C̄.\n\n- **50% output duty cycle, whatever the CK duty cycle.** C toggles only on falling edges and A only on rising edges, each exactly T_CK apart.\n- **Quadrature outputs.** C (or D) leads A (or B) by T_CK/2, which is 90° at f_CK/2. This gives I/Q signals, for example for LO generation.\n  - The phase separation is (1 − d)·180°, where d is the CK duty cycle.\n  - So each 1% of duty-cycle error causes about 1.8° of I/Q error.\n\n## Why each element is needed\n\n- **Inv3:** the loop must contain an odd number of inversions. With only Inv1 and Inv2, the loop would just recirculate the stored bit, like a dynamic memory, and never toggle.\n- **Two switches on opposite clock phases:** with a single switch, or with both on at once, the loop becomes a transparent inverting ring. It would then oscillate freely (\"race around\") instead of toggling once per cycle.\n\n## Speed limits\n\n**Maximum frequency.** A transition must travel around the whole loop within one clock period:\n- T_CK ≳ 2t_sw + 3t_inv.\n- Latch time-borrowing lets the unequal segments (two inverters versus one) share the period.\n- With both switches held on, the same loop would oscillate at f_osc ≈ 1/[2(2t_sw + 3t_inv)].\n- So f_CK,max ≈ 2·f_osc. The divider's highest output frequency is about the free-running frequency of its own ring.\n- Inv1 and Inv3 do the heavy lifting, since each charges a dynamic node through a switch.\n\n**Minimum frequency.** Node A floats while CK is low, and node C floats while CK is high.\n- Leakage shifts a floating node by about ΔV ≈ I_leak·(T_CK/2)/C_in.\n- This sets f_CK,min ≈ I_leak/(2·C_in·ΔV_max).\n- A drooping node also causes crowbar current in the inverter it drives and makes it more noise-sensitive.\n\n## Clock sensitivity\n\n**Overlap (CK and CK̄ both high for a time t_ov)** briefly closes the ring, so a new value can race through both switches.\n- At a rising CK edge, the race path is E→A→B→C, with delay ≈ 2t_sw + t_inv.\n- At a falling CK edge, the race path is B→C→D→E→A, with delay ≈ 2t_sw + 2t_inv.\n- So t_ov must be shorter than about 2t_sw + t_inv.\n\n**Underlap (both clocks low)** is harmless if brief, because both dynamic nodes simply hold their values.\n\n**Need for a clean complementary clock** is the main drawback of this circuit. This motivates C²MOS and TSPC (true single-phase clock) dividers.\n\n## Practical notes\n\n- **Switch type:** an NMOS-only switch passes at most V_DD − V_TH. This can leave the PMOS in Inv1 and Inv2 partly on, causing static current and slow edges.\n  - Transmission gates fix this, but each switch then needs both clock phases.\n  - Clocked (C²MOS) inverters, which merge each switch with its inverter, are another fix.\n- **Charge injection and clock feedthrough:** these disturb the voltages stored on nodes A and C.\n- **Output taps:** take outputs from the driven nodes (B, D, E) through buffers. Extra load on B or E slows the loop.\n- **Power:** it is purely dynamic, roughly ΣC_node·V_DD²·(f_CK/2) + C_clk·V_DD²·f_CK, with no static current.\n- **No reset needed:** the circuit has only two states, so it always divides correctly. Only its absolute phase relative to CK (0° or 180°) depends on the power-up state.",
        "format": "markdown",
        "sha256": "a227d73d130a736376fd5152dd6ab45c15caa83b0b513480fbffbdc29722305b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a divide-by-two built from dynamic latches, with feedback producing an output at half the clock frequency. The extra internal timing and implementation claims are not required by the golden solution and do not undermine the essential answer.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1433,
        "output_tokens": 41386,
        "total_tokens": 42819,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39085,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1433,
        "output_tokens": 41386,
        "total_tokens": 42819,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39085,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Effect of the red inverter\n\n**It hurts the circuit.** It adds an unclocked path around the master latch, so when CK is low the red inverter fights Inv1 and closes a ring-oscillator loop.\n\nTo follow the analysis, call the left node X (the output of the last inverter, which feeds the CK switch) and call the output of Inv1 Y. The red inverter drives Y from X. It is in parallel with the master latch (the CK switch plus Inv1), but it has no switch.\n\n## CK high (master transparent, slave holding)\n\n- The CK switch connects X to Inv1's input, so Inv1 and the red inverter see the same input.\n- Both drive Y to X̄, so there is no conflict.\n- The red inverter even lets Y respond without waiting for the switch.\n- The only cost is extra capacitance on X and Y.\n\n## CK low (master should hold, slave transparent)\n\n- Inv1 holds Y at the stored value.\n- That value passes through the closed CK̄ switch and the two right-hand inverters, so X becomes equal to Y.\n- The red inverter therefore drives Y toward X̄ = Ȳ, which is opposite to what Inv1 is holding.\n\nThe loop formed by the CK̄ switch, the two right-hand inverters and the red inverter has **three inversions and no open switch**. During the whole low half-cycle it is a three-stage ring oscillator, with Inv1 trying to hold one of its nodes. The master is no longer isolated from its input, so the circuit loses its master-slave (edge-triggered) behavior and a race-through path appears.\n\n## Consequences\n\n**Contention and static current.** During CK low, Inv1 and the red inverter fight, so current flows straight from supply to ground. Y, and therefore the value the slave samples, sits at a degraded, ratioed level. This means more power and smaller noise margins.\n\n**Functional failure unless the red inverter is much weaker than Inv1.** If CK stays low longer than the delay around that loop (roughly one switch delay plus three inverter delays), Y is pulled to mid-rail or toggles. The slave then captures a wrong or indeterminate value.\n- The minimum operating frequency rises from the leakage limit to near the circuit's maximum speed, so the divider becomes narrowband.\n- Near the top of the range, the race doesn't have time to complete. There the red path merely gives Y a head start by bypassing the CK switch, which may raise f_max slightly. This is the same speed-versus-range trade seen in ring or injection-locked dividers.\n\n**If it is made weak enough to be harmless, it does nothing useful.** It still burns static current, degrades the logic levels, and loads both nodes.\n\n**It does not make the divider static.** Inv1's input still floats when CK is low, and the second inverter's input still floats when CK is high. The leakage-limited minimum frequency remains, and is somewhat worse because a degraded level is stored.\n\n## The correct way to make it static\n\nIf the goal was a static divider, each weak inverter should face backward across its own latch:\n- From Inv1's output back to Inv1's input.\n- From the second inverter's output back to its input.\n\nThese are preferably gated by the opposite clock phase. Placed this way, they reinforce the stored state instead of fighting it.",
        "format": "markdown",
        "sha256": "f79d0953b4fa39f559a7d042e2401a45e9f69be06ad9443e0320076989f491a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the unclocked feedforward path, its high-speed benefit, and the low-frequency odd-loop conflict that raises the minimum usable clock rate. However, it overstates the limit as near the maximum speed and then inconsistently says the minimum remains leakage-limited.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1232,
        "output_tokens": 35095,
        "total_tokens": 36327,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1232,
        "output_tokens": 35095,
        "total_tokens": 36327,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Effect of the Red Inverter\n\n## Node labels\n\n- **A**: output of the last inverter, which is also the input of the CK switch\n- **B**: input of Inv1\n- **X**: output of Inv1\n- **C**: input of Inv2\n\nWithout the red inverter, the circuit is a standard dynamic divide-by-2. The CK switch and Inv1 form the master, which stores its state on node B. The CK̄ switch, Inv2 and Inv3 form the slave. The loop contains three inversions, so A toggles once per clock period.\n\n## What the red inverter does\n\nThe red inverter connects **A directly to X**, bypassing both the CK switch and Inv1, and it is **never clocked**. Whenever the CK̄ switch is on, A equals X, because the signal passes through two inversions (Inv2 and Inv3). So the red inverter, Inv2 and Inv3 form a **three-stage ring oscillator** whenever CK is low.\n\n### Phase CK = 1 (CK switch on, CK̄ switch off)\n\n- The red inverter and Inv1 have the same input, so they drive X in the same direction. No conflict.\n- X switches faster: there is more drive, and the red path avoids the switch's RC delay.\n- The only cost is extra capacitance on A (loading Inv3) and on X.\n\n### Phase CK = 0 (CK switch off, CK̄ switch on)\n\n- Inv1 should hold X at the value stored on B.\n- The slave copies X to A, so A toggles. This is the normal dividing action.\n- Once A toggles, the red inverter immediately tries to drive X the opposite way. **It fights Inv1.**\n\nThis contention has three consequences:\n\n1. **Power.** For the rest of the low phase, current flows from VDD to ground through Inv1's PMOS and the red inverter's NMOS, or vice versa. The circuit no longer consumes only dynamic (CV²f) power. The penalty is worst at low frequencies.\n2. **Degraded level at X.** X settles at a ratioed level between the two inverters' strengths, which reduces the noise margin.\n3. **Possible functional failure.** This happens if the red inverter is comparable in strength to Inv1, or if CK stays low long enough:\n   - X crosses Inv2's threshold, the change travels around the ring, and A toggles again.\n   - The resulting extra edges give the wrong division ratio.\n   - The divider therefore acquires a **minimum operating frequency**, set by a few gate delays rather than by leakage as in the original dynamic divider.\n   - Operation also becomes sensitive to the clock duty cycle. If CK stops in the low state, the circuit can free-run as a ring oscillator.\n\n## The benefit: higher speed\n\nAt high input frequencies, the low phase ends shortly after A toggles, before the disturbance can propagate around the ring. The \"fight\" then becomes useful:\n\n- X begins moving toward its next value **before** CK rises, giving it a head start.\n- The CK switch is effectively removed from the critical loop. The loop becomes red inverter → CK̄ switch → Inv2 → Inv3.\n\nAs a result, the **maximum operating frequency increases**. The circuit now behaves like a three-stage ring oscillator injection-locked by CK. It divides correctly within a band of input frequencies near twice that ring's natural frequency.\n\n## Bottom line\n\nThe red inverter trades power, signal levels, and the divider's very wide operating range for a higher maximum speed. It turns a broadband dynamic divider into something closer to an injection-locked ring divider.\n\nIf the red inverter is made much weaker than Inv1, so that X can never flip, low-frequency operation is preserved. However, the speed gain then becomes modest, while the static-current penalty remains.",
        "format": "markdown",
        "sha256": "43eba7f5254f23ff07e295f2ee675a2364a0509f4992bbb4e8ae7314f62b6d39"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the red inverter’s feedforward path bypassing the CK switch and Inv1, improving high-speed operation, and explains that the unclocked loop can fight Inv1 and raise the minimum usable frequency at low rates. Extra claims about sizing and power do not undermine the central answer.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1232,
        "output_tokens": 27732,
        "total_tokens": 28964,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26491,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1232,
        "output_tokens": 27732,
        "total_tokens": 28964,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26491,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Effect of the red inverter: it adds a race path\n\n## How the circuit normally works\n\nWithout the red inverter, this is a dynamic divide-by-2:\n\n- S1 + Inv1 form the master latch, S2 + Inv2 form the slave latch, and Inv3 closes the loop with an odd number of inversions.\n- When CK is high, S1 is on. Node A follows X, and B = X̄. S2 is off, so the input of Inv2 holds its value.\n- When CK goes low, S1 opens. Node A floats and freezes the old X, so B is frozen too. S2 closes, copies B forward, and X toggles once per clock cycle.\n- The circuit works because S1 and S2 are never on at the same time. A signal can never run all the way around the loop in one phase.\n\n## What the red inverter changes\n\nThe red inverter drives B directly from X, with no switch. It bypasses the master latch, so B is no longer frozen when CK is low.\n\n- **CK high (S1 on, S2 off):** The red inverter is simply in parallel with S1–Inv1, and both drive B to X̄. This is harmless. It adds some drive at B and extra capacitance at X and B.\n- **CK low (S1 off, S2 on):** The red inverter, S2, Inv2 and Inv3 form a **three-stage ring oscillator**. About t_S + 2t_inv after CK falls, X toggles. The red inverter then tries to flip B back, while Inv1 tries to hold B at the old value because its input is frozen.\n\n## Consequences\n\n1. **Race and a minimum clock frequency.** If the red inverter can pull B past Inv2's threshold, the new X value races around the loop. The slave then toggles a second time unless CK goes high first.\n   - Roughly, the low phase must be shorter than the red loop's delay (≈ t_S + 3t_inv).\n   - The divider therefore fails at low frequencies and becomes sensitive to clock duty cycle.\n   - The circuit now behaves like a narrow-band, gated ring oscillator locked to the clock. It even free-runs if the clock stops low.\n   - By contrast, the original divider works down to a low frequency set only by leakage.\n\n2. **Contention.** Even if Inv1 wins, part of every low phase has a direct path from VDD to ground: through the PMOS of one inverter, node B, and the NMOS of the other. This causes:\n   - static (crowbar) current, so higher power;\n   - degraded levels at B and at the slave node, which also makes Inv2 draw short-circuit current;\n   - smaller noise margins and slower edges, which adds jitter.\n\n3. **Possible speed benefit.** At high frequencies, X toggles only while CK is high, so the inverters don't fight. B also responds to X without passing through S1. The loop delay drops from about 2t_S + 3t_inv to about t_S + 3t_inv, so the maximum frequency may rise somewhat. The extra capacitance at X and B eats into this gain.\n\n4. **No cure for leakage.** Nodes A and the slave input still float. The red inverter actually pushes B in the same direction a leakage failure would.\n\n## Bottom line\n\nThe red inverter trades a modest gain in maximum speed, if any, for a much higher minimum frequency, extra power, and poorer robustness.\n\nIf the goal is static operation, the extra inverter should instead be a weak keeper placed in feedback around Inv1 (from B back to A) or around Inv2. That forms a latch with an even number of inversions, rather than a ring with an odd number.",
        "format": "markdown",
        "sha256": "ba8327682d4db3fb111e92bfc8d905ed67926beea95fc9cb6ac2a0587cb8933c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the red inverter as a feedforward path that bypasses part of the first latch and can improve high-speed operation, while its unclocked three-inversion loop can dominate at low clock rates and raise the minimum usable frequency. The extra discussion does not change that central tradeoff.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1232,
        "output_tokens": 42296,
        "total_tokens": 43528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41127,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1232,
        "output_tokens": 42296,
        "total_tokens": 43528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41127,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# No, the red inverter is not a keeper\n\n## How the red inverter is wired\n\nLabel the nodes around the loop:\n\n- **X**: output of the last inverter, fed back to the left side of the CK switch\n- **Y**: input of Inv1 (right side of the CK switch)\n- **Z**: output of Inv1 (left side of the CK̄ switch)\n- **W**: input of Inv2 (right side of the CK̄ switch)\n\nThe red inverter's input is at **X** and its output is at **Z**. It points the same way as Inv1. So it sits in parallel with the series path \"CK switch + Inv1\" and bypasses the CK switch.\n\n## Why the proposed answer is wrong\n\n1. **It forms no latch with Inv1.** Inv1 and the red inverter drive the same node (Z), and neither drives the other's input. A keeper for Inv1 would have to go from Z back to Y. That means pointing left and landing on the right side of the CK switch.\n2. **The feedback has the wrong sign.** The only loop through the red inverter is X → red → Z → CK̄ switch → Inv2 → Inv3 → X. That is three inversions, which is negative feedback. Storing a bit needs positive feedback (an even number of inversions).\n3. **It touches the wrong nodes.** The leaky, floating nodes are Y (floating when CK = 0) and W (floating when CK = 1). The red inverter connects to neither. Even a correctly wired keeper around Inv1 would fix only Y, and W would still set a minimum clock frequency.\n\n## What the red inverter actually does\n\n- **When CK = 1:** The CK switch is on, so Y = X. The red inverter and Inv1 then have the same input and the same output. It is just extra drive in parallel with Inv1, with no logical effect.\n- **When CK = 0:** The CK̄ switch is on, so the red inverter, Inv2 and Inv3 form a **three-stage ring oscillator**. Inv1, held by the charge stored on Y, has to overpower it.\n  - Right after CK falls, the red inverter and Inv1 agree.\n  - Once the divider's new state reaches X, the red inverter starts driving Z opposite to Inv1.\n\nThe outcome depends on the relative strengths:\n\n- **Red inverter much weaker than Inv1:** the circuit still divides by 2. But Z and W sit at degraded levels and draw contention current for the rest of the CK-low phase.\n- **Red inverter comparable or stronger, or Y has leaked (low clock frequency):** the ring wins. The output then toggles extra times while CK is low, and the division fails.\n\nSo the red inverter is an always-on bypass of the first latch. It turns the CK-low phase into a ring oscillator, which is the opposite of a keeper. It does not remove the minimum-frequency limit. If anything, it worsens low-frequency operation and adds static power; at most it adds a little drive at high frequency.\n\n## What would actually remove the minimum frequency\n\nAdd weak feedback around both storage inverters:\n\n- one from Z back to Y, around Inv1;\n- one from Inv2's output back to W, around Inv2.\n\nAlternatively, replace the dynamic stages with static latches that use clocked feedback.",
        "format": "markdown",
        "sha256": "b2d624270a05de10c2a959b4d63c00eff4b40c3df07450ccaf51c30a89d5d704"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly rejects the keeper interpretation, identifies the red inverter as a feedforward bypass that adds drive, and explains how its unclocked loop can overpower the dynamic latch at low clock rates rather than eliminate the minimum-frequency limit.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1307,
        "output_tokens": 65582,
        "total_tokens": 66889,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 64516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1307,
        "output_tokens": 65582,
        "total_tokens": 66889,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 64516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# No, the answer is wrong\n\nThe red inverter is not connected back-to-back with Inv1, so it cannot act as a keeper.\n\n## How it is actually connected\n\nLabel the nodes:\n- **A**: the left node (output of the last inverter, input side of the CK switch)\n- **X**: Inv1's input (after the CK switch)\n- **B**: Inv1's output\n- **Y**: Inv2's input\n\nThe red inverter goes **from A to B**. That is the same direction as the path \"CK switch + Inv1\", so it sits in **parallel** with that path, not anti-parallel to Inv1. A keeper for Inv1 would have to go from B back to X.\n\nThe parity check settles it. The only loop that contains the red inverter is:\n\nred → B → CK̄ switch → Inv2 → Inv3 → A → red\n\nThat loop has **three inversions**. An odd-inversion loop is astable, like a ring oscillator. A keeper or latch needs an even-inversion loop, which is bistable.\n\n## What it does in each clock phase\n\n| Phase | Switches | Effect of red inverter |\n|---|---|---|\n| CK = 1 | CK on, CK̄ off | Red and Inv1 both drive B to Ā. Red is just redundant extra drive. Y (Inv2's input) is floating, and red does nothing for it. |\n| CK = 0 | CK off, CK̄ on | Inv1 holds B from the stored X. Through CK̄, Inv2 and Inv3 (a non-inverting path), A becomes equal to B. Red therefore drives B toward B̄, opposite to what Inv1 holds. |\n\n## The actual role\n\nThe red inverter **bypasses the CK switch**, so the master latch is never truly opaque. During CK = 0, the red inverter, the CK̄ switch, Inv2 and Inv3 form a **three-stage ring oscillator** that fights Inv1. In other words, it reopens exactly the race path that the master–slave arrangement exists to break.\n\n- **If it is much weaker than Inv1:** it only causes contention current and degraded levels at B and Y.\n- **If it is comparable to or stronger than Inv1:** A toggles more than once per clock phase, and the circuit no longer divides by 2. If the clock stops with CK low, the circuit free-runs as a ring oscillator.\n\n## Effect on leakage and minimum frequency\n\n- **X during CK = 0:** the red inverter makes things worse. As X leaks and Inv1 weakens, red pushes B toward the wrong value, so the state flips sooner. This raises the minimum clock frequency rather than removing it.\n- **Y during CK = 1:** Y stays floating, so even a correct keeper on Inv1 alone could not remove the minimum frequency.\n\n## What a real fix looks like\n\n- Add a weak inverter from B back to X, cross-coupled with Inv1.\n- Add another weak inverter from Inv2's output back to Y.\n- Size both weak enough that the switches can overwrite them.\n- Alternatively, use static latches with clocked feedback.",
        "format": "markdown",
        "sha256": "93b0c86b5e28e929c10294f8bb6a8b3ea9b831a22b513b7a3aa9654cd6141a8a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation, identifies the A-to-B feedforward path bypassing the CK switch, and explains the low-frequency contention/ring behavior that can raise the minimum usable clock rate. It does not clearly state the intended high-speed benefit of pre-driving Inv1’s output and presents the branch mainly as harmful.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1307,
        "output_tokens": 42951,
        "total_tokens": 44258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41941,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1307,
        "output_tokens": 42951,
        "total_tokens": 44258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41941,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# No, I don't agree\n\nThe answer misreads the wiring. The red inverter is not cross-coupled with Inv1, and it does not remove the leakage limit.\n\n## What the red inverter is actually connected to\n\nCall the two right-hand inverters Inv2 and Inv3.\n\n- **Red input:** the node to the left of the CK switch. Call it X. This is the loop node fed back from the output of Inv3 along the bottom wire.\n- **Red output:** the output of Inv1. Call it Y. This is the node just before the CK̄ switch.\n\nSo the red inverter is in parallel with the series path \"CK switch + Inv1.\" It points the same way as Inv1, and both drive node Y.\n\nA keeper would have to be anti-parallel to Inv1: from Y back to Inv1's input, between the CK switch and Inv1. Nothing here forms a two-inverter loop, so there is no latch.\n\nIt also doesn't touch the dynamic storage nodes:\n- Inv1's input still floats when CK = 0.\n- Inv2's input still floats when CK = 1.\n\nLeakage still corrupts these nodes, so the minimum-frequency limit remains.\n\n## What it really does\n\nCount the inversions in the loop the red inverter closes: red → CK̄ switch → Inv2 → Inv3 → red. That is **three inversions**. A loop with an even number of inversions stores a state (a latch). An odd loop is a **ring oscillator**.\n\n| Phase | Switches | Red inverter's effect |\n|---|---|---|\n| CK = 1 | CK on, CK̄ off | Same input (X) and same output (Y) as Inv1, so it is just extra drive in parallel. The loop is open. |\n| CK = 0 | CK off, CK̄ on | Y passes to the slave and X toggles. The red inverter sees the new X and drives Y back toward the old value, opposite to Inv1, which holds the old X on its floating input. Red, Inv2 and Inv3 form a closed three-stage ring, and only Inv1 fights it. |\n\nIn effect, the red inverter turns the dynamic divider into a **clock-gated three-stage ring oscillator that the clock must injection-lock** to obtain ÷2. Its consequences:\n\n- **It creates a lower frequency bound.** CK must return high before an edge makes one trip around the red loop (about three inverter delays plus a switch delay). Otherwise the output toggles twice per cycle and the division fails. This bound is set by gate delays, so it is far higher than the leakage-set limit. This is the opposite of the claimed benefit.\n- **It may raise the maximum speed somewhat.** Node Y starts switching as soon as X changes, without waiting for CK and the CK switch. The circuit then behaves like an injection-locked divider with a finite lock range.\n- **A weak red inverter doesn't help either.** If it is sized so Inv1 always wins, it just adds contention current during CK = 0 and still does nothing for the floating nodes.\n\n## What a real keeper would look like\n\nA genuine keeper would be:\n- a weak inverter from Y back to Inv1's input, and\n- a similar one across Inv2 (from its output back to its input).\n\nThese form the even two-inverter loops that make each latch static and remove the leakage-imposed minimum frequency.",
        "format": "markdown",
        "sha256": "a9b6b5e378bfd1f3f1f039b217299d3229c2e8e169cfd6c90e2b688e97891e6a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as an unclocked feedforward path bypassing the CK switch and Inv1. It explains both the high-speed benefit and the low-frequency ring/feedback behavior that can corrupt division and raise the minimum usable clock rate.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1307,
        "output_tokens": 46336,
        "total_tokens": 47643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 45251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1307,
        "output_tokens": 46336,
        "total_tokens": 47643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 45251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Optimizing the inverter-based shunt-feedback LNA for NF at R_in = 50 Ω\n\nThe idea is to raise g_m1 + g_m2 well above 20 mS and raise R_F at the same time, so that R_in stays at 50 Ω. Both moves lower the NF.\n\n## Key relations\n\nLet G_m = g_m1 + g_m2 and r_o = r_o1‖r_o2. Treat C₁ as a short, take R_S = 50 Ω, and assume both devices have the same noise coefficient γ.\n\n$$R_{in}=\\frac{R_F+r_o}{1+G_m r_o}\\;\\approx\\;\\frac{1}{G_m}+\\frac{R_F}{G_m r_o}$$\n\nThe gain from the input node to the output is\n\n$$A_v=\\frac{(1-G_mR_F)\\,r_o}{R_F+r_o}.$$\n\nAt match (R_in = R_S), this reduces to |A_v| = R_F/R_S − 1, so R_F = (1 + |A_v|)·50 Ω.\n\nThe noise factor is\n\n$$F=1+\\frac{R_F(1+G_mR_S)^2+\\gamma G_m(R_S+R_F)^2}{R_S\\,(G_mR_F-1)^2}\\;\\approx\\;1+\\frac{\\gamma}{G_mR_S}+\\frac{R_S}{R_F}\\left(1+\\frac{1}{G_mR_S}\\right)^2$$\n\nNote that r_o does not appear in F. It matters only through the matching condition.\n\n## The difficulty\n\nSuppose r_o were very large compared with R_F. Then R_in ≈ 1/G_m, and:\n\n- G_m is pinned at 20 mS.\n- The transistor noise term is stuck at γ.\n- F ≈ 1 + γ + 4R_S/R_F, so F exceeds 1 + γ (about 3 dB for γ = 1) whatever R_F is.\n\nSimply making M₁ and M₂ stronger to raise G_m would pull R_in below 50 Ω.\n\n## The fix\n\nLow NF needs both G_m ≫ 1/R_S and R_F ≫ R_S. Matching must then come from the second term of R_in: R_F is divided down by the loop gain (the Miller effect) rather than R_in being set by 1/G_m. The matching condition gives\n\n$$R_F = R_S + (G_mR_S-1)\\,r_o$$\n\nThe procedure:\n\n1. **Scale up the transistors.** Multiply W₁ and W₂ by a factor K. Because the inverter self-biases at its trip point, the current also scales by K. G_m rises by K and r_o falls by K.\n2. **Raise R_F** using the equation above to bring R_in back to 50 Ω.\n3. **Collect the benefits.** The term γ/(G_mR_S) falls because G_m is larger. The term R_S/R_F falls because R_F is larger. The gain |A_v| rises.\n\nThe inverter is an efficient way to do this because g_m1 and g_m2 share the same bias current. Bias both devices at high g_m/I_D (low overdrive) to get the most G_m per unit power.\n\n## What limits it\n\nUnder scaling, G_m·r_o stays equal to A₀, the inverter's intrinsic gain. As K → ∞:\n\n- R_F approaches (1 + A₀)R_S.\n- F approaches 1 + 1/(1 + A₀).\n\nExample with A₀ = 10 and γ = 1:\n\n| G_mR_S | R_F | \\|A_v\\| | NF |\n|---|---|---|---|\n| 2 | 300 Ω | 5 | 3.5 dB |\n| 4 | 425 Ω | 7.5 | 1.8 dB |\n| 8 | 488 Ω | 8.75 | 1.1 dB |\n| → ∞ | 550 Ω | 10 | 0.4 dB |\n\n## In practice\n\n- Choose L, or cascode if headroom permits, to maximize g_m·r_o.\n- Raise G_m as far as the power budget allows, and set R_F to restore 50 Ω.\n- Stop when the input capacitance becomes a problem. It is roughly C_in ≈ C_GS1 + C_GS2 + (1 + |A_v|)(C_GD1 + C_GD2), which grows with both width and gain. It degrades S₁₁ and NF at the upper band edge.\n- Also watch output swing and linearity, which shrink as the gain rises.",
        "format": "markdown",
        "sha256": "4a64ade93f7457117229f28b81aadb70b541a5bb70a5899e04fde80b5944043e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It uses the finite-output-resistance input-match relation and correctly explains that gm can exceed 1/Rs while RF is adjusted to preserve the 50 Ω match, allowing NF to fall below 1 + γ. This satisfies the golden solution’s full-credit rule; the additional finite-gain and practical-limit discussion does not change the core result.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2689,
        "output_tokens": 33612,
        "total_tokens": 36301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2689,
        "output_tokens": 33612,
        "total_tokens": 36301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Optimizing the Inverter Feedback LNA for NF with $R_{in} = 50\\ \\Omega$\n\n**Short answer:** Make $g_{m1}+g_{m2}$ well above $1/R_S$ by widening $M_1$ and $M_2$, which raises the current. Then raise $R_F$ until $R_{in}$ returns to 50 Ω. The 50 Ω then comes mostly from the feedback resistor divided by the loop gain, not from the noisy $1/g_m$ of the transistors. Both noise contributions fall.\n\n## Key relations\n\nDefine $G_m = g_{m1}+g_{m2}$ and $r_O = r_{O1}\\parallel r_{O2}$, in parallel with any load.\n\n$$R_{in}=\\frac{R_F+r_O}{1+G_m r_O}\\;\\approx\\;\\frac{1}{G_m}+\\frac{R_F}{1+G_m r_O}$$\n\n$$NF=1+\\frac{R_F(1+G_mR_S)^2+\\gamma G_m(R_F+R_S)^2}{R_S\\,(G_mR_F-1)^2}\\;\\approx\\;1+\\frac{R_S}{R_F}+\\frac{\\gamma}{G_mR_S}$$\n\nThe approximation holds for $G_mR_S\\gg1$ and $R_F\\gg R_S$.\n\n$r_O$ does not appear in the NF. It is a noiseless shunt at the output, so it changes $R_{in}$ and the gain but not the noise.\n\n## Why the usual view hits a wall\n\nIf we take $R_{in}\\approx 1/G_m$ (λ = 0), the match fixes $G_m = 20$ mS. The NF is then approximately:\n\n$$NF \\approx 1+\\gamma+\\frac{4R_S}{R_F}$$\n\n- The only free knob is a larger $R_F$, and the NF can never drop below $1+\\gamma$.\n- With finite $r_O$, choosing $G_m = 1/R_S$ forces $R_F = R_S$. That gives zero gain and infinite NF.\n\n## The optimization\n\nUse the second term of $R_{in}$. Holding $R_{in}=R_S$ requires:\n\n$$R_F = R_S + (G_mR_S-1)\\,r_O = R_S(1+G_m r_O) - r_O$$\n\n1. **Raise $G_m$ above $1/R_S$.** Scale $W_1$ and $W_2$ together; the self-biased inverter's current scales with $W$. This shrinks the transistor noise term, $\\gamma/(G_mR_S)$.\n2. **Raise $R_F$** to the value given by the equation above, restoring $R_{in}$ = 50 Ω. A larger $R_F$ reduces its own noise term, $R_S/R_F$, and raises the gain.\n3. **Maximize the intrinsic gain $A_0 = G_m r_O$.**\n   - Bias in moderate inversion; the overdrive is set by $V_{DD}$.\n   - Use a somewhat longer $L$.\n   - Do not load the output, or buffer it, since a load replaces $r_O$ with $r_O\\parallel R_L$.\n   - As $G_m$ grows at fixed $A_0$, $R_F \\to (1+A_0)R_S$ and $NF \\to 1 + 1/(1+A_0)$.\n\n**Illustration** (assuming $A_0 = 10$, $\\gamma = 1$, $R_S$ = 50 Ω):\n\n| $G_mR_S$ | $G_m$ | $R_F$ | NF |\n|---|---|---|---|\n| 2 | 40 mS | 300 Ω | 3.5 dB |\n| 4 | 80 mS | 425 Ω | 1.8 dB |\n| 10 | 200 mS | 500 Ω | 1.0 dB |\n| ∞ | – | 550 Ω | 0.4 dB |\n\n**Intuition:** A 50 Ω termination synthesized by shunt feedback is \"cold.\" Its noise is that of a resistor $(1+A_0)$ times larger.\n\n## Where it stops\n\n- **Power:** current is proportional to $W$.\n- **Input capacitance:** $C_{in}\\approx C_{GS1}+C_{GS2}+(1+|A_v|)(C_{GD1}+C_{GD2})+C_{pad}$.\n  - This creates an input pole at about $2/(R_S C_{in})$, which degrades both $S_{11}$ and NF at the top of the band.\n  - The Miller term grows as $R_F$ and the gain grow.\n- **Linearity and headroom** suffer at higher gain.\n\nIn practice:\n\n1. Choose the largest $W$ that the bandwidth and power budget allow.\n2. Maximize $g_m r_O$.\n3. Set $R_F = R_S(1+G_m r_O) - r_O$ and verify by simulation, since $r_O$ depends on bias.\n\nIf more is needed, a series input inductor can absorb $C_{in}$. Alternatively, a noise-canceling auxiliary path can be added: $M_1$/$M_2$ noise is in phase at the input and output, while the signal is inverted.",
        "format": "markdown",
        "sha256": "0f7357f965448f018e5f923d17002e2e9eaa0a786c82cb6b63c086aafe5a9556"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It uses the finite-output-resistance input-match relation and correctly recommends raising gm above 1/Rs while adjusting RF to preserve the 50 Ω match, allowing NF to fall below 1 + γ. The added NF analysis is consistent with that optimization.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2689,
        "output_tokens": 44013,
        "total_tokens": 46702,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42269,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2689,
        "output_tokens": 44013,
        "total_tokens": 46702,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42269,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Optimizing the Inverter-Based Resistive-Feedback LNA for NF with R_in = 50 Ω\n\n**Short answer:** Make R_F as large as possible. Then widen M1 and M2, which raises the bias current and g_m1 + g_m2, until R_in comes back to 50 Ω.\n\n## 1. What the 50-Ω constraint fixes\n\nLet G_m = g_m1 + g_m2 and r_O = r_o1 ∥ r_o2.\n\n$$R_{in}=\\frac{R_F+r_O}{1+G_m r_O}\\;\\approx\\;\\frac{1}{g_{m1}+g_{m2}}\\quad (r_O\\to\\infty)$$\n\nWhen the input is matched, all of the input current v_in/R_S flows through R_F, because the gates draw no current. So the gain is set by R_F alone:\n\n$$A_v=\\frac{v_{out}}{v_{in}} = 1-\\frac{R_F}{R_S}$$\n\n## 2. Noise figure\n\nInclude the channel noise of M1 and M2 (4kTγG_m) and the thermal noise of R_F. The result does not depend on r_O:\n\n$$F = 1+\\frac{R_F}{R_S}\\left(\\frac{1+G_mR_S}{G_mR_F-1}\\right)^2+\\frac{\\gamma G_m}{R_S}\\left(\\frac{R_F+R_S}{G_mR_F-1}\\right)^2$$\n\n## 3. Ideal case (large r_O)\n\nMatching forces G_m = 1/R_S = 20 mS, so\n\n$$F = 1+\\frac{4R_FR_S+\\gamma(R_F+R_S)^2}{(R_F-R_S)^2}\\approx 1+\\gamma+\\frac{4R_S}{R_F}$$\n\n- The transistor contribution is frozen at about γ.\n- The usual remedy, raising g_m, is not available, because it would pull R_in below 50 Ω.\n- The only remaining knob is R_F. Make it as large as possible, which also raises the gain. The NF then approaches 1 + γ.\n\n## 4. Real case (finite r_O): the actual optimization\n\nAs R_F grows toward r_O, R_in rises above 50 Ω. To restore the match, increase W1 and W2. This raises G_m above 1/R_S and lowers r_O, and it helps the NF. Substituting the matching condition (for R_F ≫ R_S):\n\n$$F\\approx 1+\\frac{R_S}{R_F}\\left(\\frac{R_F+2r_O}{R_F+r_O}\\right)^2+\\gamma\\,\\frac{r_O}{R_F+r_O}$$\n\n- The transistor term falls from γ to γ/(1 + R_F/r_O).\n- The R_F term falls from 4R_S/R_F toward R_S/R_F.\n- The match is now provided more and more by Miller division of R_F, rather than by 1/G_m.\n\nBecause the inverter is self-biased, G_m·r_O ≈ A₀ (its intrinsic gain) stays roughly constant as W scales. The match then requires R_F + r_O ≈ (1 + A₀)R_S.\n\n- Wider devices (smaller r_O) permit a larger R_F.\n- In the limit of very wide devices, F → 1 + 1/(1 + A₀).\n\n## 5. Practical recipe and limits\n\n1. **Choose R_F as large as possible.** It is limited by the gain and linearity you want (|A_v| = R_F/R_S − 1) and by R_F < (1 + A₀)R_S.\n2. **Scale W1 and W2 up until R_in = 50 Ω.** In other words, use the largest G_m the power budget allows.\n3. **Get the most G_m per unit current.** Bias both devices for high g_m/I_D (moderate inversion), and pick L to raise A₀ without sacrificing too much f_T.\n4. **Use the NMOS/PMOS split for biasing, not noise.** Only g_m1 + g_m2 matters for noise (if γ_n ≈ γ_p), so set the split to center the trip point and output DC level.\n5. **Watch the input capacitance.** C_in ≈ C_gs1 + C_gs2 + (R_F/R_S)(C_gd1 + C_gd2) grows with both W and R_F. This degrades S11 and NF at high frequencies. Together with power, it sets the practical optimum. An input inductor can absorb C_in, and C1 must be a good short in band.\n\nGetting well below about 1 + γ at reasonable power requires a different topology, such as noise cancellation.",
        "format": "markdown",
        "sha256": "17eb4e23850e6529704adcdcb88772e9e616feb3b15cb98efa1659f3cf348e8f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It uses the finite-output-resistance matching relation and explains that total gm can exceed 1/Rs while RF is adjusted to keep Rin at 50 Ω, allowing NF to fall below 1 + γ. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2689,
        "output_tokens": 32659,
        "total_tokens": 35348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31117,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2689,
        "output_tokens": 32659,
        "total_tokens": 35348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31117,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$$\nR_{in}=\\frac{R_F+R_{D2}}{1+\\dfrac{g_{m1}g_{m3}}{2}\\,R_{D1}R_{D2}}\n$$\n\nThis assumes $\\lambda=0$, no body effect, $g_{m2}=g_{m3}$, an ideal tail source $I_{SS}$, and $R_{in}$ taken as the impedance looking into node P excluding $C_{in}$.\n\n**Derivation**\n\nApply a test voltage $V_P$ at node P and find the current $I_x$ flowing into P.\n\n1. **Stage M1:**\n $$V_X=-g_{m1}R_{D1}V_P$$\n\n2. **Differential pair M2–M3:** The tail current is constant, so $i_{d2}+i_{d3}=0$. For these PMOS devices, $i_{d2}=g_m(v_S-V_X)$ and $i_{d3}=g_m v_S$. Their sum is zero, so $v_S=V_X/2$. The current M3 injects into the output node is then\n $$i_{d3}=\\frac{g_{m3}}{2}V_X=-\\frac{g_{m1}g_{m3}R_{D1}}{2}V_P\\equiv -G\\,V_P$$\n The path from P to the output is inverting, so $R_F$ provides negative feedback.\n\n3. **Input node:** The gate of M1 draws no current, so all of $I_x$ flows through $R_F$:\n $$I_x=\\frac{V_P-V_{out}}{R_F}$$\n\n4. **KCL at the output node:**\n $$\\frac{V_{out}}{R_{D2}}=-G V_P+\\frac{V_P-V_{out}}{R_F}\n \\;\\;\\Rightarrow\\;\\;\n V_{out}=V_P\\,\\frac{(1-GR_F)R_{D2}}{R_F+R_{D2}}$$\n\n5. **Solve for $I_x$:** Substituting $V_{out}$ into step 3 gives\n $$I_x=V_P\\,\\frac{1+G R_{D2}}{R_F+R_{D2}}$$\n Taking $R_{in}=V_P/I_x$ and $G=g_{m1}g_{m3}R_{D1}/2$ gives the result at the top.\n\n**Check with Blackman's formula**\n\n- With the loop broken, the impedance is $R_F+R_{D2}$.\n- With P open, the loop gain is $T_{oc}=\\tfrac{g_{m1}g_{m3}}{2}R_{D1}R_{D2}$.\n- With P shorted, the loop gain is $T_{sc}=0$.\n\nSo $R_{in}=(R_F+R_{D2})/(1+T_{oc})$, which agrees.\n\n**Notes**\n\n- For large loop gain and $R_F\\gg R_{D2}$: $R_{in}\\approx \\dfrac{2R_F}{g_{m1}g_{m3}R_{D1}R_{D2}}$.\n- If $g_{m2}\\neq g_{m3}$, replace $g_{m3}/2$ with $g_{m2}g_{m3}/(g_{m2}+g_{m3})$.\n- If $C_{in}$ is included, the total impedance at the input is $Z_{in}=R_{in}\\,\\|\\,(1/sC_{in})$.",
        "format": "markdown",
        "sha256": "e0f2946f376c57056705f5beac6999bc6c45f1653c8b796c9fa572c11d326287"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact input-resistance expression, with the unloaded gain matching the golden solution under the stated gm2 = gm3 assumption. The derivation and stated unequal-gm extension are consistent with the model.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 5971,
        "total_tokens": 6198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4839,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 5971,
        "total_tokens": 6198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4839,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$$R_{in}=\\frac{R_F+R_{D2}}{1+\\dfrac{g_{m1}g_{m2}R_{D1}R_{D2}}{2}}$$\n\nThis assumes λ = 0, an ideal tail source I_SS, and g_m2 = g_m3. R_in is the impedance looking into node P to the right of C_in. The derivation applies a test voltage V_P at P and finds the current I_P that flows into the node.\n\n**Step 1: Path from P to X.** M1 is a common-source stage:\n\n$$V_X=-g_{m1}R_{D1}V_P$$\n\n**Step 2: Path from X to the output current.** The gate of M2 moves by V_X and the gate of M3 is at AC ground. Because the tail current is constant, the common source node moves by V_X/2. The drain current of M3 that flows into the output node is then:\n\n$$I_3=g_{m3}\\frac{V_X}{2}=-\\frac{g_{m1}g_{m2}R_{D1}}{2}V_P$$\n\nSigns check: if V_P rises, V_X falls. M2 then conducts more and M3 conducts less, so V_out falls. This is negative feedback through R_F.\n\n**Step 3: KCL at the output node.** The gate of M1 draws no current, so all of I_P flows through R_F into the output node. Therefore:\n\n$$V_{out}=V_P-I_PR_F$$\n\n$$I_P+I_3=\\frac{V_{out}}{R_{D2}}=\\frac{V_P-I_PR_F}{R_{D2}}$$\n\nSubstituting I_3 from Step 2:\n\n$$I_P\\left(1+\\frac{R_F}{R_{D2}}\\right)=V_P\\left(\\frac{1}{R_{D2}}+\\frac{g_{m1}g_{m2}R_{D1}}{2}\\right)$$\n\n**Result.** Solving for V_P/I_P gives the expression at the top.\n\nThis is the general form (R_F + R_out)/(1 + A_0) for a resistor wrapped around an inverting amplifier:\n- The open-circuit gain is A_0 = g_m1R_D1·g_m2R_D2/2.\n- The output resistance is R_out = R_D2.\n\n**Sanity checks:**\n- With no amplifier gain (g_m → 0), R_in = R_F + R_D2, which is the two resistors in series to ground.\n- With large loop gain, R_in ≈ 2(R_F + R_D2)/(g_m1 g_m2 R_D1 R_D2).\n\nIf g_m2 ≠ g_m3, replace g_m2/2 with g_m2g_m3/(g_m2+g_m3). The total impedance at P including the photodiode capacitance is R_in ∥ 1/(C_in s).",
        "format": "markdown",
        "sha256": "801061bdfa86c2e2c55b96beb0dbda7dbbae6922d4953d6be73363adfc1cca83"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact input-resistance expression and the correct unloaded gain. The minor sign-direction wording in the explanation does not change the result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 7711,
        "total_tokens": 7938,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6780,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 7711,
        "total_tokens": 7938,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6780,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Input Impedance of the Feedback TIA\n\n**Assumptions:** λ = 0, no body effect, an ideal tail source I_SS, and identical M₂ and M₃ (g_m2 = g_m3). The resistance is found at low frequency, so C_in is excluded. R_in appears in parallel with C_in.\n\n## Small-signal relations\n\n**Common-source stage M₁.** The gate of M₁ draws no current, so\n\n$$v_X = -g_{m1}R_{D1}\\,v_P$$\n\n**Differential pair M₂–M₃.** Node X drives the gate of M₂, and the gate of M₃ is at ac ground. The small-signal drain current of M₃ flowing into the output node is\n\n$$i_3 = \\frac{g_{m2}}{2}v_X = -\\frac{g_{m1}g_{m2}R_{D1}}{2}\\,v_P$$\n\nAs a sign check, if v_P rises, X falls. M₂ then takes more of I_SS, so M₃ takes less and V_out falls. The feedback through R_F is therefore negative.\n\n**Node P.** The gate draws no current, so all of I_in flows through R_F:\n\n$$v_{out} = v_P - I_{in}R_F$$\n\n**Node V_out.** R_D2 carries both I_in and i₃:\n\n$$v_{out} = R_{D2}\\left(I_{in} + i_3\\right) = R_{D2}\\left(I_{in} - \\frac{g_{m1}g_{m2}R_{D1}}{2}v_P\\right)$$\n\n## Solve\n\nEquate the two expressions for v_out:\n\n$$v_P - I_{in}R_F = R_{D2}I_{in} - \\frac{g_{m1}g_{m2}}{2}R_{D1}R_{D2}\\,v_P$$\n\n$$v_P\\left(1+\\frac{g_{m1}g_{m2}}{2}R_{D1}R_{D2}\\right) = I_{in}\\,(R_F+R_{D2})$$\n\n$$\\boxed{R_{in}=\\frac{v_P}{I_{in}}=\\frac{R_F+R_{D2}}{1+\\dfrac{g_{m1}g_{m2}}{2}R_{D1}R_{D2}}}$$\n\nIf M₂ and M₃ are not identical, replace g_m2/2 with g_m2·g_m3/(g_m2 + g_m3).\n\n## Interpretation\n\n- **Without feedback** (g_m1 → 0), the input sees R_F in series with R_D2, since the drain of M₃ looks like a current source. So R_in = R_F + R_D2.\n- **With feedback**, this value is divided by 1 + T. Here T = g_m1·R_D1·(g_m2/2)·R_D2 is the loop gain measured with the input open.\n- **If T ≫ 1:**\n  $$R_{in}\\approx\\frac{R_F+R_{D2}}{g_{m1}R_{D1}(g_{m2}/2)R_{D2}}$$\n- **Input pole:** together with C_in, R_in sets an input pole at about 1/(2πR_in C_in).",
        "format": "markdown",
        "sha256": "fff35f8b1156b9537cf4857da8c6893b041e4856ce1fe0bfcb773e5ef017f10f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Derives the exact input resistance, including the output-side resistance in the numerator, and gives the correct unloaded gain for the matched differential pair. The assumptions and stated unequal-pair adjustment are consistent with the model.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 8451,
        "total_tokens": 8678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7404,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 8451,
        "total_tokens": 8678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7404,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# VCO Phase Noise Due to LDO Thermal Noise\n\n## Key observation: the LDO noise acts like noise on V_cont\n\nAt the offset frequencies of interest (kHz to MHz), the inductors L₁ are essentially short circuits. The LDO noise $v_n$ on $V_{out}$ therefore appears unattenuated as a common-mode voltage at X and Y.\n\nThe varactors $M_{v1}$ and $M_{v2}$ have their gates at X and Y, and their source/drain/n-well tied to $V_{cont}$. Their cycle-averaged capacitance thus depends on\n\n$$V_{out}-V_{cont}$$\n\nA noise voltage on $V_{out}$ is therefore indistinguishable from an equal and opposite noise voltage on $V_{cont}$. In other words, the VCO's supply sensitivity equals its tuning gain:\n\n$$\\frac{\\partial \\omega_{out}}{\\partial V_{out}} \\approx -K_{VCO}$$\n\nSo we can simply move the LDO noise source in series with the control line.\n\n## Computing the phase noise\n\nThe output frequency and phase are\n\n$$\\omega_{out}(t)=\\omega_0-K_{VCO}\\,v_n(t)\\;\\;\\Rightarrow\\;\\;\\phi_n(t)=-K_{VCO}\\!\\int v_n\\,dt,\\qquad \\frac{\\Phi_n}{V_n}(s)=-\\frac{K_{VCO}}{s}$$\n\nThis gives the phase spectrum\n\n$$S_{\\phi}(\\Delta\\omega)=\\frac{K_{VCO}^2}{\\Delta\\omega^2}\\,S_{th}$$\n\n**Narrowband-FM view.** Consider a single noise tone $V_m\\cos\\omega_m t$. It produces sidebands at $\\omega_0\\pm\\omega_m$, each with amplitude $K_{VCO}V_m/(2\\omega_m)$ relative to the carrier. Now model the noise in a 1-Hz band at offset $\\Delta\\omega$ as such a tone, with $V_m^2/2=S_{th}\\cdot(1\\,\\text{Hz})$. Here $S_{th}$ is the one-sided spectrum. The resulting phase noise is\n\n$$\\mathcal{L}(\\Delta\\omega)=\\left(\\frac{K_{VCO}V_m}{2\\Delta\\omega}\\right)^2=\\frac{K_{VCO}^2\\,S_{th}}{2\\,\\Delta\\omega^2}\\quad(\\text{i.e., } S_\\phi/2)$$\n\nUse $K_{VCO}$ in rad/s/V with $\\Delta\\omega$ in rad/s, or both in Hz.\n\n**What this means:**\n- White LDO noise produces a 1/Δω² (−20 dB/dec) phase-noise component.\n- This component adds in power to the VCO's intrinsic noise: $\\mathcal{L}_{tot}=\\mathcal{L}_{VCO}+\\mathcal{L}_{LDO}$.\n- Any 1/f noise of the LDO produces a 1/Δω³ region.\n\n## Numerical sense\n\nTake these values:\n- $K_{VCO}=2\\pi\\times100$ MHz/V\n- $\\sqrt{S_{th}}=10\\ \\text{nV}/\\sqrt{\\text{Hz}}$\n- $\\Delta f=1$ MHz\n\nThen\n\n$$\\mathcal{L}=\\frac{(100)^2\\times10^{-16}}{2}=5\\times10^{-13}\\;\\approx\\;-123\\ \\text{dBc/Hz}$$\n\nThis is comparable to the intrinsic noise of a good LC VCO. That is why the LDO must be very quiet, and why $K_{VCO}$ is kept small by doing coarse tuning with the capacitor banks B₁ and B₂.\n\n## Refinements\n\n- **Other supply-sensitive elements.** Several other effects also respond to $V_{out}$:\n  - the junction capacitances of M₁, M₂ and of the bank switches;\n  - the gate-source capacitances of M₁ and M₂;\n  - the finite output resistance of the tail source, which modulates the amplitude and converts to frequency through AM/PM.\n  \n  In general, replace $K_{VCO}$ with the actual \"pushing\" gain $K_{DD}=\\partial\\omega_{out}/\\partial V_{out}$. You can find it by simulation: step $V_{out}$ slightly and observe the frequency shift.\n- **Shaped LDO noise.** If the LDO's loop and output capacitor shape its noise, use $S_{LDO}(\\Delta\\omega)$ evaluated at the offset frequency.\n- **Inside a PLL.** This component is high-pass filtered by the loop, just like the VCO's own phase noise.",
        "format": "markdown",
        "sha256": "ca3d76a83cb11fca4d1767d6a0576e88894558600c454fd045353d1b6c64e0f2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies LDO supply pushing, relates the pushing sensitivity to the VCO tuning gain through the varactors, and converts the noise to phase noise with the required 1/Δf² dependence. The formula, design implication of reducing KVCO, and caveat to use the actual supply-pushing gain are all consistent with the golden solution.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3734,
        "output_tokens": 15087,
        "total_tokens": 18821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13467,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3734,
        "output_tokens": 15087,
        "total_tokens": 18821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13467,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# VCO Phase Noise from LDO Thermal Noise\n\n## LDO noise acts like noise on V_cont\n\n- **L₁ is a short at low frequencies.** At offset frequencies far below ω₀, the inductors have negligible impedance. Any noise v_n on V_out therefore appears directly as a common-mode change in the voltages at X and Y.\n- **The varactors see V_out − V_cont.** The gates of M_v1 and M_v2 sit at X and Y. Their source, drain and well are tied to V_cont. Their capacitance is therefore set by\n\n  V_var ≈ V_out − V_cont (plus the oscillation swing).\n\n- **So V_out has the same tuning gain as V_cont.** A change ΔV in V_out changes the varactor capacitance exactly as a change −ΔV in V_cont would:\n\n$$\\left|\\frac{\\partial \\omega_{out}}{\\partial V_{out}}\\right| = \\left|\\frac{\\partial \\omega_{out}}{\\partial V_{cont}}\\right| = K_{VCO}$$\n\n- **Differential symmetry does not help.** The noise is common mode, but both varactors shift together, so the tank's resonance frequency moves.\n- **The cross-coupled pair contributes little.** The gates, drains and tail node of M₁ and M₂ all move with V_out, so their V_GS and V_DS stay roughly constant. Because I_VCO fixes the current, the swing is also roughly unchanged. Only second-order effects remain:\n  - junction capacitances of M₁, M₂ and the switches in B₁, B₂;\n  - body effect;\n  - the finite output resistance of the tail current source.\n  \n  If these matter, use a simulated supply sensitivity (\"frequency pushing\") K_VDD in place of K_VCO. In this topology, K_VDD ≈ K_VCO.\n\n## Computing the phase noise\n\nThe LDO noise frequency-modulates the oscillator:\n\n$$\\omega_{out}(t) = \\omega_0 + K_{VCO}\\,v_n(t) \\;\\;\\Rightarrow\\;\\; V_X(t) \\propto \\cos\\!\\Big[\\omega_0 t + K_{VCO}\\!\\int v_n\\,dt\\Big]$$\n\nThe excess phase is\n\n$$\\phi_n(t) = K_{VCO}\\!\\int v_n\\,dt \\quad\\Rightarrow\\quad \\frac{\\Phi_n(s)}{V_n(s)} = \\frac{K_{VCO}}{s}$$\n\nSquaring the magnitude of this transfer function gives\n\n$$\\boxed{S_{\\phi}(\\omega) = \\frac{K_{VCO}^2}{\\omega^2}\\,S_{th}}$$\n\nwhere ω is the offset from the carrier. If you express the result as single-sideband phase noise L(Δf) in dBc/Hz and S_th is a one-sided density (such as 4kTR), include a factor of ½. This is the standard narrowband-FM result.\n\nKey consequences:\n\n- **The slope matches the VCO's own noise.** White LDO noise produces a 1/f² (−20 dB/dec) profile, the same slope as the VCO's intrinsic thermal-noise region. It therefore raises that whole region by a constant amount.\n- **The two contributions add in power:**\n\n  $$S_{\\phi,tot}(\\Delta\\omega) = S_{\\phi,VCO}(\\Delta\\omega) + \\frac{K_{VCO}^2}{\\Delta\\omega^2}S_{th}$$\n\n- **Flicker noise behaves similarly.** If the LDO also has flicker noise, it appears as a 1/f³ component through the same mechanism.\n\n## Example\n\nTake K_VCO = 2π(100 MHz/V) and an offset of 1 MHz:\n\n$$\\left(\\frac{K_{VCO}}{\\Delta\\omega}\\right)^2 = 10^4\\ \\text{V}^{-2}$$\n\nTo keep the LDO's contribution at −120 dBc/Hz, we need S_th ≈ 10⁻¹⁶ V²/Hz. That is about 10 nV/√Hz, roughly the thermal noise of a 6-kΩ resistor. For −130 dBc/Hz, the LDO needs about 3 nV/√Hz.\n\nThis is why LDOs feeding VCOs must be very quiet. Alternatively, you can:\n\n- keep K_VCO small by doing coarse tuning with banks B₁ and B₂, or\n- decouple the varactor bias from V_out, for example by AC-coupling the varactors and biasing them from a clean reference.",
        "format": "markdown",
        "sha256": "dbd1507c40e9d1a8b9e71f1a7861d2545afbfc0be6ecdaa6dfb8d6058454fa6e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing through the varactors, converts the LDO voltage-noise spectrum to frequency noise using the VCO sensitivity, and applies FM-to-phase conversion with a 1/offset² dependence. The design implication of reducing KVCO is also stated; minor factor-of-two or notation differences are secondary.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3734,
        "output_tokens": 13921,
        "total_tokens": 17655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12383,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3734,
        "output_tokens": 13921,
        "total_tokens": 17655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12383,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Phase Noise of an LC VCO Due to Thermal Noise of the LDO\n\n## 1. How the LDO noise reaches the oscillator\n\nThe inductors drop no DC voltage. At the offset frequencies of interest their impedance (ωL) is also negligible. So the common-mode (CM) level of X and Y simply follows V_out. With LDO noise v_n:\n\n$$V_X = V_{out}+v_n+V_p\\cos\\omega_0t,\\qquad V_Y = V_{out}+v_n-V_p\\cos\\omega_0t$$\n\nBecause v_n is common-mode, it does not appear directly in the differential output. However, the varactors M_v1 and M_v2 sit between X (or Y) and V_cont, so the voltage across them is\n\n$$V_X-V_{cont} = (V_{out}-V_{cont}) + v_n + V_p\\cos\\omega_0 t$$\n\nThe noise shifts the varactors' operating window along their C–V curve. This is exactly what a change of −v_n in V_cont would do. The LDO noise can therefore be referred to the control input:\n\n$$v_{n,cont} = -v_n \\quad\\Rightarrow\\quad K_{DD}\\equiv\\frac{\\partial\\omega_{out}}{\\partial V_{out}}\\approx -K_{VCO}$$\n\nIn other words, the VCO is as sensitive to its regulated supply as it is to its tuning voltage.\n\n## 2. From frequency noise to phase noise\n\nThe instantaneous frequency and the resulting excess phase are:\n\n$$\\omega_{out}(t)=\\omega_0+K_{VCO}\\,[V_{cont}-v_n(t)]$$\n\n$$\\phi_n(t) = -K_{VCO}\\!\\int v_n\\,dt \\;\\Rightarrow\\; \\Phi_n(s) = -\\frac{K_{VCO}}{s}V_n(s)$$\n\n$$S_{\\phi n}(\\Delta\\omega)=\\frac{K_{VCO}^2}{\\Delta\\omega^2}\\,S_{th}$$\n\nFor small φ_n, the output can be approximated as\n\n$$V_0\\cos(\\omega_0t+\\phi_n)\\approx V_0\\cos\\omega_0t - V_0\\,\\phi_n\\sin\\omega_0t$$\n\nSo S_φn appears as noise skirts around ω0. With S_th one-sided (V²/Hz) and K_VCO in rad/s/V:\n\n$$\\mathcal{L}(\\Delta\\omega)=\\tfrac12 S_{\\phi n}=\\frac{K_{VCO}^2\\,S_{th}}{2\\,\\Delta\\omega^2}$$\n\nMany texts drop the ½ and quote S_φn directly as the phase noise. As a sanity check, a single ripple tone V_m cos ω_m t on V_out produces FM sidebands with relative amplitude K_VCO·V_m/(2ω_m), which matches this result.\n\nSince S_th is white, this term falls at 20 dB/dec. That is the same slope as the VCO's own 1/Δω² region. The two noise powers are uncorrelated and simply add, so the LDO raises the phase noise by a fixed amount at all offsets:\n\n$$\\mathcal{L}_{tot}(\\Delta\\omega)=\\mathcal{L}_{VCO}(\\Delta\\omega)+\\frac{K_{VCO}^2S_{th}}{2\\Delta\\omega^2}$$\n\n**Example:**\n- Take K_VCO = 2π·200 MHz/V, √S_th = 20 nV/√Hz, and Δf = 1 MHz.\n- Then (K_VCO/Δω)²·S_th = (200)²·(4×10⁻¹⁶) = 1.6×10⁻¹¹ Hz⁻¹.\n- This gives 𝓛 ≈ −111 dBc/Hz, which can easily exceed the VCO's intrinsic noise.\n- Lowering this contribution to −130 dBc/Hz requires about 2 nV/√Hz.\n\nThis is why such a VCO needs a very quiet LDO and a small K_VCO, with most of the tuning range provided by the banks B1 and B2.\n\n## 3. Refinements for an accurate number\n\n- **Secondary coupling paths:** Other mechanisms also convert V_out noise into frequency changes:\n  - The junction capacitances of M1, M2 and of the off-state switches in B1/B2 depend on the CM level.\n  - I_VCO changes through the tail device's output resistance, because the tail node follows V_out. This changes the oscillation amplitude and hence the varactors' average capacitance (AM-to-PM conversion).\n  \n  To capture all of these, simulate the total pushing gain K_DD. Perturb V_out with V_cont held fixed, either with a small step or a small tone, and measure the frequency shift or sidebands. Then use S_φ = K_DD²·S_th/Δω².\n- **Shaped LDO noise:** If the LDO's loop or output capacitor shapes its noise spectrum, use S_th(Δω) in the same formula.\n- **Inside a PLL:** This noise is high-pass filtered just like the VCO's own noise, so multiply by |1 − H(jΔω)|².",
        "format": "markdown",
        "sha256": "a73bf9de59de365006e1426971440281eaaccbb15428e8a0b3655b8ee20fd803"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing through the varactors, relates the pushing gain to KVCO, and converts the LDO noise to phase noise with the required 1/Δf² dependence. The additional details do not materially undermine the essential answer.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3734,
        "output_tokens": 23973,
        "total_tokens": 27707,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3734,
        "output_tokens": 23973,
        "total_tokens": 27707,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Effect of adding C_T on phase noise\n\n**Short answer:** C_T removes one noise source, the tail-current noise near 2ω₀. In this topology, though, it usually makes the phase noise **worse**. The reason is that it removes the high impedance the tail current source presents to M₁ and M₂ at RF.\n\n## What improves\n\nThe switching pair mixes the noise of I_SS near 2ω₀ ± Δω down to ω₀ ± Δω, where it appears as phase noise. A large C_T shunts this noise to ground.\n\nThe low-frequency (flicker) noise of I_SS still gets through, because C_T is an open circuit at low frequencies.\n\n## What gets worse\n\n**Without C_T**, node P has high impedance, so I_D1 + I_D2 = I_SS at every instant. When the pair is fully switched (say M₂ off), M₁ sits in series with an ideal current source. As a result:\n- M₁'s channel noise cannot flow into the tank, because its current is pinned at I_SS.\n- Even if M₁ enters the triode region, its small R_on is in series with an infinite impedance, so it does not load the tank.\n- M₁ and M₂ inject noise only near the zero crossings.\n\n**With C_T**, P becomes an AC ground at ω₀ and 2ω₀, and the transistors act like grounded-source devices:\n- Their currents no longer sum to I_SS instantaneously. C_T supplies the difference; only the average equals I_SS.\n- The gates are DC-coupled to the opposite drains. M₁ is therefore in triode whenever V_Y − V_X > V_TH, which happens for any differential swing above about V_TH. That is almost always the case.\n- The triode condition is deepest exactly when M₁ conducts the most, with its gate at its peak and its drain at its trough.\n- M₁'s small R_on now connects node X to AC ground through C_T for part of every cycle. This periodically loads the tank resistively, lowering the effective Q and pushing the circuit into the voltage-limited regime earlier.\n- The transistors' channel noise, including the triode noise of roughly 4kT/R_on, now flows into the tank during their entire on-time, not just at the zero crossings.\n\nPhase noise scales roughly as (injected noise)/(Q²·A²). Lower Q, a clamped swing, and extra noise typically outweigh the benefit of filtering the 2ω₀ tail noise, so the phase noise rises.\n\n## Caveat: the class-C case\n\nIf M₁ and M₂ stay in saturation (small swing, or gates AC-coupled and biased below V_DD), a large C_T actually helps:\n- The drain currents become narrow pulses at the voltage peaks (class-C operation).\n- The fundamental of the differential drain current rises from (4/π)I_SS toward 2I_SS. That gives about π/2 (≈3.9 dB) more swing for the same current.\n- Transistor noise remains about γ times the tank noise, and the 2ω₀ tail noise is filtered.\n\nThis is why class-C oscillators lower the gate bias. A further practical limit: an excessively large C_T can cause squegging.\n\nAn alternative is the Hegazi tail filter, which keeps the tail impedance high at 2ω₀. A large capacitor goes across the current source to shunt its noise, and an inductor between the source and node P resonates with node P's capacitance at 2ω₀.",
        "format": "markdown",
        "sha256": "aac7cd6bc48ad3a2114b8840370bf8ac7fdbe9999c7b170d0f1364aafb4aedb4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It describes both a class-C improvement (narrow pulses and increased fundamental tank current) and degradation at excessive C_T via squegging/instability, capturing the required nonmonotonic effect. Some of its other claims about typical worsening are questionable, but the golden solution’s full-credit criteria are met.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3856,
        "output_tokens": 39369,
        "total_tokens": 43225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38234,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3856,
        "output_tokens": 39369,
        "total_tokens": 43225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38234,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Adding C_T to the Tail Node\n\n**Short answer: the phase noise usually gets worse, even though C_T removes one noise source.**\n\n## What C_T helps\n\n- The noise of I_SS near 2ω₀ normally flows through M1 and M2. The switching pair acts like a mixer driven at ω₀ and translates this noise to ω₀ ± Δω.\n- With C_T in place, that 2ω₀ noise is bypassed to ground instead.\n- C_T does nothing for the flicker noise of I_SS, because the capacitor is open at low frequencies. That noise still modulates the amplitude and converts to phase noise through AM-to-PM conversion.\n\n## What C_T hurts\n\nWithout C_T, node P is free to bounce at 2ω₀ so that I_D1 + I_D2 stays equal to I_SS. C_T turns P into an AC ground and removes the high impedance that I_SS presented to the sources of M1 and M2. This has two consequences.\n\n**1. The noise of M1 and M2 is no longer masked.**\n- With an ideal tail and complete switching, the transistor that is on carries exactly I_SS.\n- Because it is degenerated by an infinite impedance, its channel noise cannot change its drain current.\n- So M1 and M2 normally inject noise only in the short window near the zero crossings, when both are on.\n- With C_T, the fraction of the on-device's noise that reaches its drain is\n\n  i_d / i_n = sC_T / (g_m + sC_T) → ≈ 1\n\n- Each transistor now injects essentially its full 4kTγg_m into the tank for most of the period.\n\n**2. Transistors in triode load the tank.**\n- For large swings, when V_X falls below V_Y − V_TH, M1 enters the triode region.\n- Without C_T this is benign: R_on1 is in series with a current source, so the tank does not \"see\" it.\n- With C_T, node X sees R_on1 in series with an AC short to ground. M1 and then M2 shunt the tank twice per period.\n- As a result:\n  - The effective Q drops.\n  - The amplitude saturates, because extra current is burned in R_on instead of building swing.\n  - R_on adds its own thermal noise.\n\n## Net result\n\nUnless the swing is kept small enough for M1 and M2 to stay saturated (differential peak below roughly V_TH), these penalties outweigh the removal of the 2ω₀ tail noise. The phase noise therefore rises.\n\n## Remedies\n\n- **Tail noise filter:** keep the tail high-impedance at 2ω₀ while still bypassing the current source. Put the large capacitor directly across I_SS and insert an inductor between it and P. Size the inductor to resonate with the capacitance at P at 2ω₀. This is the Hegazi–Abidi noise-filtering technique.\n- **Class-C bias:** AC-couple the gates and bias them lower so the devices never enter triode. In this case a large tail capacitor actually improves phase noise.",
        "format": "markdown",
        "sha256": "cfab6f01dc9b37fed00d6808f69f72faea7fc73d5970c23d1a193e8f23b8130f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer identifies triode operation as a possible source of degradation, which is a real mechanism, and mentions that class-C operation may improve phase noise. But it frames the effect mainly as worsening and misses the key CT-dependent nonmonotonic behavior: CT can induce class-C-like switching with peak tank currents above ISS, while small CT can upconvert M1/M2 flicker noise and excessive CT can cause low-frequency instability.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3856,
        "output_tokens": 31477,
        "total_tokens": 35333,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3856,
        "output_tokens": 31477,
        "total_tokens": 35333,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Effect of adding C_T to the tail node\n\n**Short answer:** C_T removes one phase-noise mechanism, the tail noise around 2ω₀. In this topology it also adds a worse one: the switching transistors now load the tank whenever they enter triode. So the phase noise usually does not improve, and it often gets worse.\n\n## What improves\n\n- **Tail noise near 2ω₀ is shunted away.** Without C_T, M₁ and M₂ act as a switching mixer for the tail current. Noise of I_SS near 2ω₀ is commutated down to ω₀ ± Δω and becomes phase noise. This is the (4/9)γ g_m,tail R term in the Rael–Abidi noise factor, F = 1 + γ + (4/9)γ g_m,tail R.\n- **Condition for this to work:** If 1/(2ω₀C_T) ≪ 1/(g_m1 + g_m2), the noise current flows into C_T instead of the pair, and that term largely disappears.\n- **Not helped: low-frequency (1/f) tail noise.** C_T is essentially an open circuit at low frequencies. This noise still modulates the amplitude and, through the varactors, the frequency (AM→FM conversion).\n\n## What gets worse\n\n**1. The pair no longer steers a fixed current.**\n- Without C_T, I₁ + I₂ is pinned at I_SS, and V_P rides up and down at 2ω₀.\n- With a large C_T, P becomes an ac ground and V_P stays roughly constant.\n- C_T then supplies large current pulses to each device near the instant its gate voltage peaks. This is class-C-like conduction.\n\n**2. The conducting device is driven into triode.**\n- Because of the cross-coupling, a device's gate peaks exactly when its own drain is at its minimum.\n- At that instant, V_G − V_D = 2A, where A is the single-ended peak swing.\n- So for any swing with A > V_TH/2, the conducting transistor is in (deep) triode.\n\n**3. Triode now loads the tank.**\n- With a current-source tail, a triode device is harmless. It sits in series with I_SS, so the tank sees an open circuit.\n- For the same reason, when the other device is off, it is just a cascode on I_SS and its noise cannot reach the tank.\n- With C_T, the tank node sees roughly R_on to ac ground for a substantial part of each cycle. This has two effects:\n  - It lowers the tank Q, which reduces the swing for a given I_SS.\n  - It injects the device's channel noise (≈ 4kT/R_on, plus g_m noise) directly into the tank.\n\nThis is the mechanism identified by Hegazi, Sjöland and Abidi. Even the parasitic tail capacitance causes it to some degree.\n\n**Net result:** The loss of Q and amplitude typically outweighs the benefit of filtering the 2ω₀ tail noise. C_T only helps if the swing is small enough that M₁ and M₂ stay in saturation.\n\n## How to get the benefit without the penalty\n\n- **Hegazi's tail filter.** Keep a large capacitor across I_SS to shunt its noise. Insert an inductor between that node and P, chosen to resonate with the capacitance at P at 2ω₀. The pair then still sees a high impedance at 2ω₀.\n- **Class-C oscillator.** AC-couple the gates and bias them low enough that M₁ and M₂ never enter triode. Then a large C_T becomes beneficial:\n  - The narrow current pulses occur at the voltage peaks, where the impulse sensitivity function (ISF) is ≈ 0.\n  - Their fundamental approaches 2I_SS instead of (4/π)I_SS.\n  - This gives up to ~3.9 dB lower phase noise at the same current.\n  - C_T must not be so large that it causes squegging (intermittent, on-off oscillation).",
        "format": "markdown",
        "sha256": "77c9ec92b307605b6c5cb3c7442354477c00fa7d239eba1f9c28ac6339c49a20"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It describes the class-C-like pulsed-current regime as a possible phase-noise improvement, and identifies triode loading and excessive-CT squegging as degradation mechanisms. Together these capture the non-monotonic tradeoff; the additional emphasis on tail-noise filtering does not negate that.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3856,
        "output_tokens": 37850,
        "total_tokens": 41706,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3856,
        "output_tokens": 37850,
        "total_tokens": 41706,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Oscillation frequency of the coupled-oscillator circuit\n\n**Result:** each tank resonates at ω₀ = 1/√(LC), but the circuit oscillates slightly off ω₀:\n\n$$\n\\omega_{osc}\\approx\\omega_0\\left(1\\pm\\frac{1}{2Q}\\frac{I_1}{I_{SS}}\\right)\n$$\n\nThe figure gives no capacitor values, so this can only be stated symbolically. The derivation follows.\n\n## 1. What the circuit is\n\n- Each half is a cross-coupled LC oscillator. The pairs M2–M3 and M6–M7 are biased by I_SS and supply a negative resistance.\n- The pairs biased by I₁ couple the two cores.\n- X₁ and Y₁ drive the coupling pair of the lower core directly (straight outer wires).\n- X₂ and Y₂ drive the coupling pair of the upper core with the wires crossed, which is an inversion.\n\nThe loop is therefore two stages plus one inversion. The two oscillators cannot lock in phase or in antiphase. They settle 90° apart, so this is a quadrature oscillator: V₂ = ±jV₁.\n\n## 2. Why the frequency shifts away from ω₀\n\nUse C for the total capacitance at each of X₁, Y₁, X₂, Y₂. Here it is only parasitic: gate capacitance of the cross-coupled device and of the other core's coupling device, drain junction and gate-drain capacitances, and the inductor's own capacitance. Use R_p and Q for each tank's parallel loss and quality factor.\n\nConsider the current flowing into tank 1:\n\n- The cross-coupled pair's current, proportional to I_SS, is in phase with V₁. It acts as a negative conductance that cancels R_p.\n- The coupling pair's current, proportional to I₁, follows V₂. Since V₂ is 90° away from V₁, this current is in quadrature with V₁.\n\nThe total tank current is therefore rotated from the tank voltage by an angle φ. For both pairs switching (or for transistors scaled with their currents):\n\n$$\n\\tan\\varphi=\\frac{G_{m1}}{G_{m2}}\\approx\\frac{I_1}{I_{SS}}\n$$\n\nAn RLC tank shows this phase only when it operates off resonance:\n\n$$\n\\tan\\varphi = Q\\left(\\frac{\\omega}{\\omega_0}-\\frac{\\omega_0}{\\omega}\\right)\\approx 2Q\\frac{\\Delta\\omega}{\\omega_0}\n$$\n\nSolving for Δω gives the result at the top.\n\nThe same answer follows from the small-signal equations. Let Y_T be the tank admittance at each node. The two cores obey (Y_T − G_m2)V₁ = G_m1V₂ and (Y_T − G_m2)V₂ = −G_m1V₁. Together these give:\n\n$$\n(Y_T-G_{m2})^2=-G_{m1}^2\n$$\n\n- The real part gives G_m2 = 1/R_p, which sets the amplitude.\n- The imaginary part gives ωC − 1/(ωL) = ±G_m1, so Δω ≈ ±G_m1/(2C).\n\n## 3. Remarks\n\n- **The ± sign:** the two signs are the two possible phase sequences. X₂ leading X₁ corresponds to ω₀ + Δω, and X₂ lagging X₁ to ω₀ − Δω. Small asymmetries decide which mode the circuit picks.\n- **Weak coupling:** for I₁ ≪ I_SS, the circuit runs essentially at ω₀.\n- **Equal currents:** for I₁ = I_SS, each tank works at a 45° phase shift, so ω ≈ ω₀[1 ± 1/(2Q)].\n- **Typical size:** with Q ≈ 10 and I₁/I_SS ≈ 0.25–0.5, the shift is about 1–2.5%.",
        "format": "markdown",
        "sha256": "17e81c5910752c0e903ff8e39b22a59587f9b4f31d26b7224bfc080c3e77385a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the tank resonance and the correct coupling-induced shift, Δω ≈ (I₁/I_SS)ω₀/(2Q), including the two possible signs. The additional small-signal gₘ/(2C) expression follows alongside the stated tank-loss balance, so it does not undermine the correct estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2009,
        "output_tokens": 48982,
        "total_tokens": 50991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47652,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2009,
        "output_tokens": 48982,
        "total_tokens": 50991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47652,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Oscillation Frequency of the Coupled (Quadrature) LC Oscillator\n\n## Identifying the circuit\n\nThe figure shows two identical LC oscillators:\n\n- **Core pairs:** each oscillator has a cross-coupled pair with tail current $I_{SS}$.\n- **Coupling pairs:** each oscillator also has a pair with tail current $I_1$, driven by the other oscillator.\n- **Top to bottom:** $X_1, Y_1$ drive the bottom coupling pair directly.\n- **Bottom to top:** $X_2, Y_2$ drive the top coupling pair with a crossover.\n\nThe loop formed by the two coupling paths therefore has a net inversion. As a result, the two oscillators lock in quadrature: $V_2 = \\pm jV_1$.\n\n## Phasor argument\n\nLook at one tank, say $X_1Y_1$.\n\n- **Core pair current:** with hard switching, its fundamental is proportional to $I_{SS}$. It is in phase with the tank's own voltage $V_1$.\n- **Coupling pair current:** its fundamental is proportional to $I_1$. It is in phase with $V_2$, so it is 90° away from $V_1$.\n\nThe total tank current is therefore rotated from $V_1$ by\n\n$$\n\\varphi=\\tan^{-1}\\frac{I_1}{I_{SS}}\n$$\n\nFor $V_1$ to stay in phase with the core current, the tank impedance must supply the opposite phase shift. The tank must therefore run off resonance. Near resonance, $\\tan\\angle Z \\approx -2Q\\,\\Delta\\omega/\\omega_0$, so\n\n$$\n2Q\\frac{|\\Delta\\omega|}{\\omega_0}\\approx\\frac{I_1}{I_{SS}}\n$$\n\n## Small-signal check\n\nLet $G_m$ be the effective transconductance of a core pair and $G_c$ that of a coupling pair. KCL on the half circuits gives:\n\n$$\n\\frac{V_1}{Z}=G_mV_1+G_cV_2,\\qquad \\frac{V_2}{Z}=G_mV_2-G_cV_1\n$$\n\nThese combine to:\n\n$$\n\\frac1Z-G_m=\\pm jG_c\n$$\n\nTaking real and imaginary parts:\n\n- **Real part:** $G_m = 1/R_p$, the amplitude condition.\n- **Imaginary part:** $\\omega C-\\dfrac{1}{\\omega L}=\\pm G_c$.\n\nThis gives $\\Delta\\omega \\approx G_c/2C$. Since $G_cR_p = G_c/G_m \\approx I_1/I_{SS}$, this agrees with the phasor argument.\n\n## Result\n\n$$\n\\omega_{osc}\\approx\\frac{1}{\\sqrt{LC}}\\left(1\\pm\\frac{1}{2Q}\\,\\frac{I_1}{I_{SS}}\\right)\n$$\n\nHere:\n- $C$ is the total capacitance at each output node.\n- $Q=R_p/(L\\omega_0)$ is the tank quality factor.\n\nThe exact form is $Q\\left(\\dfrac{\\omega}{\\omega_0}-\\dfrac{\\omega_0}{\\omega}\\right)=\\pm\\dfrac{I_1}{I_{SS}}$.\n\n**Interpretation:**\n- The circuit does not oscillate at $1/\\sqrt{LC}$. It sits off resonance by about $(\\omega_0/2Q)(I_1/I_{SS})$.\n- For example, with $Q=8$ and $I_1=0.3I_{SS}$, the shift is about 2%.\n- The shift can be above or below $\\omega_0$. The two cases correspond to the two possible quadrature sequences ($X_2$ leading or lagging $X_1$ by 90°).\n- Operating off resonance also lowers the effective tank Q, which degrades phase noise.",
        "format": "markdown",
        "sha256": "06ca083d7973658e986e3208215f35da4d2372b33448c82368eb9d572d4bf91e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the tank resonance and the correct coupling-induced shift, approximately ±(ω₀/2Q)(I₁/I_SS), including the two possible signs. The intermediate G_c/(2C) result is explicitly tied to the amplitude condition G_m=1/R_p, so it does not conflict with the required estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2009,
        "output_tokens": 20702,
        "total_tokens": 22711,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19396,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2009,
        "output_tokens": 20702,
        "total_tokens": 22711,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19396,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-opus-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Oscillation Frequency\n\n**Result:** the circuit oscillates slightly away from the tank resonance:\n\n$$\n\\omega_{osc}\\approx\\omega_0\\left[1\\pm\\frac{1}{2Q}\\,\\frac{I_1}{I_{SS}}\\right],\\qquad \\omega_0=\\frac{1}{\\sqrt{LC}},\\quad Q=R_pC\\omega_0 .\n$$\n\nHere $C$ is the total capacitance at each output node. No capacitors are drawn, so it is the device and inductor parasitics. $R_p$ is the equivalent parallel loss resistance of each tank.\n\n## 1. What the circuit is\n\n- Each half is a cross-coupled LC oscillator. The core pair, biased by $I_{SS}$, supplies the negative resistance.\n- The outer pairs, biased by $I_1$, couple the two halves. $X_1,Y_1$ drive stage 2 directly, while $X_2,Y_2$ drive stage 1 through a crossover.\n- This puts one inversion in the loop, so the circuit is a quadrature oscillator.\n\nWith $V_1=V_{X1}-V_{Y1}$, $V_2=V_{X2}-V_{Y2}$, and $Z$ the tank impedance including the core pair:\n\n$$\nV_2=-G_{m1}ZV_1,\\qquad V_1=+G_{m1}ZV_2\\;\\Rightarrow\\;(G_{m1}Z)^2=-1\\;\\Rightarrow\\;G_{m1}Z(j\\omega)=\\pm j\n$$\n\nSo each stage must provide 90° of phase shift, and the tanks cannot operate at $\\omega_0$.\n\n## 2. Small-signal form\n\nFor $Z$ to be purely imaginary, the core pair must cancel $R_p$, leaving a lossless tank. Then\n\n$$\nC\\omega-\\frac{1}{L\\omega}=\\pm G_{m1}\\;\\Rightarrow\\;\n\\omega_{osc}=\\frac{\\pm G_{m1}+\\sqrt{G_{m1}^2+4C/L}}{2C}\\approx\\omega_0\\pm\\frac{G_{m1}}{2C}\n$$\n\n## 3. Large-signal form (pairs fully switching)\n\nTwo fundamental currents flow into node $X_1$:\n\n- The core pair injects about $(2/\\pi)I_{SS}$, in phase with $V_{X1}$.\n- The coupling pair injects about $(2/\\pi)I_1$, in quadrature, because $V_{X2}=\\pm jV_{X1}$.\n\nApplying KCL at the tank:\n\n- **Real part:** sets the amplitude, $V_p\\approx(2/\\pi)R_pI_{SS}$.\n- **Imaginary part:** $\\left(C\\omega-\\dfrac{1}{L\\omega}\\right)V_p=\\pm\\dfrac{2}{\\pi}I_1$, which gives $\\left(C\\omega-\\dfrac{1}{L\\omega}\\right)R_p=\\pm\\dfrac{I_1}{I_{SS}}$.\n\nThe tank therefore runs at a phase of $\\tan^{-1}(I_1/I_{SS})$ from resonance. Solving gives the result stated at the top:\n\n$$\n\\omega_{osc}\\approx\\omega_0\\left[1\\pm\\frac{1}{2Q}\\,\\frac{I_1}{I_{SS}}\\right]\n$$\n\n## Notes\n\n- **Sign:** in the ideal symmetric circuit, either mode can occur.\n  - The \"+\" mode, above $\\omega_0$, has $X_2$ leading $X_1$ by 90°.\n  - The \"−\" mode, below $\\omega_0$, has $X_2$ lagging $X_1$ by 90°.\n  - Which one appears depends on mismatches and on phase shift in the coupling path.\n- **Size of the shift:** for $I_1=I_{SS}/4$ and $Q=10$, the frequency is about 1.25% away from $\\omega_0$.",
        "format": "markdown",
        "sha256": "60d1b3bbe9bc2bc68606fcfda703ee7b17d59de9d4377880cc8517e292a77818"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The main estimate correctly starts from the tank resonance and gives the large-signal coupling shift \u001b[0m\u001b[0mΔω/ω0 ≈ (I1/ISS)/(2Q). The extra small-signal form is presented with the tank-loss cancellation assumption, so it does not undermine the correct result.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2009,
        "output_tokens": 35707,
        "total_tokens": 37716,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2009,
        "output_tokens": 35707,
        "total_tokens": 37716,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    }
  ]
}
