{
  "model_key": "claude_sonnet_46",
  "display_name": "Claude Sonnet 4.6",
  "provider": "anthropic",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "Claude Sonnet 4.6 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (anthropic/claude-sonnet-4.6) at maximum reasoning effort. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Claude Sonnet 4.6 on 2026-11-10 ($3.00 input, $0.30 cached input, $15.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 75,
          "incorrect_count": 75,
          "partial_credit_count": 48,
          "zero_count": 27,
          "mean_score_0_to_4": 2.486666666666667,
          "score_percent": 62.16666666666667,
          "score_distribution": {
            "0": 27,
            "1": 28,
            "2": 15,
            "3": 5,
            "4": 75
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 75,
          "incorrect_count": 75,
          "partial_credit_count": 48,
          "zero_count": 27,
          "mean_score_0_to_4": 2.486666666666667,
          "score_percent": 62.16666666666667,
          "score_distribution": {
            "0": 27,
            "1": 28,
            "2": 15,
            "3": 5,
            "4": 75
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 59,
          "incorrect_count": 31,
          "partial_credit_count": 12,
          "zero_count": 19,
          "mean_score_0_to_4": 2.8444444444444446,
          "score_percent": 71.11111111111111,
          "score_distribution": {
            "0": 19,
            "1": 6,
            "2": 4,
            "3": 2,
            "4": 59
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 59,
          "incorrect_count": 31,
          "partial_credit_count": 12,
          "zero_count": 19,
          "mean_score_0_to_4": 2.8444444444444446,
          "score_percent": 71.11111111111111,
          "score_distribution": {
            "0": 19,
            "1": 6,
            "2": 4,
            "3": 2,
            "4": 59
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 16,
          "incorrect_count": 44,
          "partial_credit_count": 36,
          "zero_count": 8,
          "mean_score_0_to_4": 1.95,
          "score_percent": 48.75,
          "score_distribution": {
            "0": 8,
            "1": 22,
            "2": 11,
            "3": 3,
            "4": 16
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 16,
          "incorrect_count": 44,
          "partial_credit_count": 36,
          "zero_count": 8,
          "mean_score_0_to_4": 1.95,
          "score_percent": 48.75,
          "score_distribution": {
            "0": 8,
            "1": 22,
            "2": 11,
            "3": 3,
            "4": 16
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 24,
        "incorrect_count": 26,
        "partial_credit_count": 17,
        "zero_count": 9,
        "mean_score_0_to_4": 2.46,
        "score_percent": 61.5,
        "score_distribution": {
          "0": 9,
          "1": 10,
          "2": 4,
          "3": 3,
          "4": 24
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 25,
        "incorrect_count": 25,
        "partial_credit_count": 17,
        "zero_count": 8,
        "mean_score_0_to_4": 2.52,
        "score_percent": 63.0,
        "score_distribution": {
          "0": 8,
          "1": 10,
          "2": 5,
          "3": 2,
          "4": 25
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 26,
        "incorrect_count": 24,
        "partial_credit_count": 14,
        "zero_count": 10,
        "mean_score_0_to_4": 2.48,
        "score_percent": 62.0,
        "score_distribution": {
          "0": 10,
          "1": 8,
          "2": 6,
          "4": 26
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 0,
        "input_tokens": 198572,
        "output_tokens": 4464550,
        "total_tokens": 4663122
      },
      "known_totals": {
        "cached_input_tokens": 0,
        "input_tokens": 198572,
        "output_tokens": 4464550,
        "total_tokens": 4663122
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 19,
          "incorrect_count": 11,
          "partial_credit_count": 5,
          "zero_count": 6,
          "mean_score_0_to_4": 2.8666666666666667,
          "score_percent": 71.66666666666667,
          "score_distribution": {
            "0": 6,
            "1": 2,
            "2": 1,
            "3": 2,
            "4": 19
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 20,
          "incorrect_count": 10,
          "partial_credit_count": 5,
          "zero_count": 5,
          "mean_score_0_to_4": 2.9,
          "score_percent": 72.5,
          "score_distribution": {
            "0": 5,
            "1": 3,
            "2": 2,
            "4": 20
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 20,
          "incorrect_count": 10,
          "partial_credit_count": 2,
          "zero_count": 8,
          "mean_score_0_to_4": 2.7666666666666666,
          "score_percent": 69.16666666666667,
          "score_distribution": {
            "0": 8,
            "1": 1,
            "2": 1,
            "4": 20
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 5,
          "incorrect_count": 15,
          "partial_credit_count": 12,
          "zero_count": 3,
          "mean_score_0_to_4": 1.85,
          "score_percent": 46.25,
          "score_distribution": {
            "0": 3,
            "1": 8,
            "2": 3,
            "3": 1,
            "4": 5
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 5,
          "incorrect_count": 15,
          "partial_credit_count": 12,
          "zero_count": 3,
          "mean_score_0_to_4": 1.95,
          "score_percent": 48.75,
          "score_distribution": {
            "0": 3,
            "1": 7,
            "2": 3,
            "3": 2,
            "4": 5
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 6,
          "incorrect_count": 14,
          "partial_credit_count": 12,
          "zero_count": 2,
          "mean_score_0_to_4": 2.05,
          "score_percent": 51.24999999999999,
          "score_distribution": {
            "0": 2,
            "1": 7,
            "2": 5,
            "4": 6
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# MOSFET Intrinsic Gain When W and L Are Doubled\n\n## Intrinsic Gain Components\n\nThe intrinsic gain is defined as:\n$$A_v = g_m \\cdot r_o$$\n\nI need to examine how each parameter scales under W → 2W, L → 2L.\n\n## Scaling Analysis\n\n### Transconductance $g_m$\n\n$$g_m = \\mu_n C_{ox} \\frac{W}{L}(V_{GS} - V_{th})$$\n\nSince W and L both double, the **W/L ratio is unchanged**. At the same bias point ($V_{GS}$ or equivalently $I_D$):\n\n$$\\boxed{g_m' = g_m \\quad \\text{(unchanged)}}$$\n\n### Output Resistance $r_o$\n\nThe Early voltage scales linearly with channel length: $V_A = E_{sat} \\cdot L$, so:\n\n$$r_o = \\frac{V_A}{I_D} = \\frac{E_{sat} \\cdot L}{I_D}$$\n\nSince $I_D$ is unchanged (W/L is unchanged) but L doubles:\n\n$$\\boxed{r_o' = 2\\,r_o \\quad \\text{(doubles)}}$$\n\n## Result\n\n| Parameter | Before | After | Change |\n|-----------|--------|-------|--------|\n| $W/L$ | $W/L$ | $W/L$ | ×1 |\n| $I_D$ | $I_D$ | $I_D$ | ×1 |\n| $g_m$ | $g_m$ | $g_m$ | ×1 |\n| $r_o$ | $r_o$ | $2r_o$ | **×2** |\n| **$A_v = g_m r_o$** | $A_v$ | $2A_v$ | **×2** |\n\n## Conclusion\n\n**The intrinsic gain doubles.** The W/L ratio preservation keeps $g_m$ constant, but the increased channel length suppresses channel-length modulation ($\\lambda \\propto 1/L$), doubling $r_o$ and therefore doubling $A_v$.",
        "format": "markdown",
        "sha256": "fece4be739fde584fe951901f11acbcdc13d3f76e604b07f5a30fbd37be4aafd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling both dimensions leaves W/L, gm, and approximately ID unchanged, while the longer channel approximately doubles ro and intrinsic gain.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 3433,
        "total_tokens": 3463,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2890,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 3433,
        "total_tokens": 3463,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2890,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# MOSFET Intrinsic Gain When W and L Are Both Doubled\n\n## Intrinsic Gain Definition\n\n$$A_v = g_m \\cdot r_o$$\n\n## Analyzing Each Parameter\n\n### Transconductance ($g_m$)\n\n$$g_m = \\mu_n C_{ox} \\frac{W}{L}(V_{GS} - V_T)$$\n\nWhen both W and L double: $\\dfrac{W}{L} \\rightarrow \\dfrac{2W}{2L} = \\dfrac{W}{L}$ → **unchanged**\n\nSince the aspect ratio and bias are preserved, $g_m$ stays the same and so does $I_D$.\n\n### Output Resistance ($r_o$)\n\n$$r_o = \\frac{|V_A|}{I_D} = \\frac{1}{\\lambda I_D}$$\n\nThe Early voltage scales with channel length: $|V_A| \\propto L$ (longer channel → less channel-length modulation)\n\nWhen L doubles: $|V_A| \\rightarrow 2|V_A|$, and since $I_D$ is unchanged:\n\n$$r_o \\rightarrow 2\\, r_o \\quad \\textbf{(doubles)}$$\n\n## Result\n\n$$A_v' = g_m \\cdot (2\\,r_o) = \\boxed{2 \\cdot A_v}$$\n\nThe intrinsic gain **doubles**.\n\n| Parameter | Effect | Reason |\n|-----------|--------|--------|\n| $g_m$ | ×1 | W/L ratio unchanged |\n| $r_o$ | ×2 | $V_A \\propto L$ |\n| $A_v = g_m r_o$ | **×2** | Dominated by L increase |\n\n**Key insight:** Width doesn't appear in the intrinsic gain expression $A_v = \\frac{2|V_A|}{V_{OD}}$ — only the channel length matters, through its effect on $V_A$.",
        "format": "markdown",
        "sha256": "9faedf4358a71ecb70d12f64f394fa13a3254f920d3292030367df35b314e776"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that with constant overdrive, doubling both dimensions leaves gm and ID approximately unchanged, while doubling L increases ro and intrinsic gain by about 2×. The stated scaling assumptions are appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 2312,
        "total_tokens": 2342,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1815,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 2312,
        "total_tokens": 2342,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1815,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# MOSFET Intrinsic Gain When W and L Are Both Doubled\n\n## Setup\n\nThe intrinsic gain is defined as:\n$$A_v = g_m \\cdot r_o$$\n\nI'll track how each parameter changes when **W → 2W** and **L → 2L** at a fixed bias (constant V_GS).\n\n---\n\n## Effect on g_m\n\n$$g_m = \\mu_n C_{ox} \\frac{W}{L}(V_{GS} - V_T)$$\n\nSince the **W/L ratio is unchanged**:\n$$g_m \\xrightarrow{W,L \\to 2W,2L} g_m \\quad \\text{(unchanged)}$$\n\nThe drain current $I_D \\propto W/L$ is also unchanged.\n\n---\n\n## Effect on r_o\n\nThe key insight: the Early voltage scales with channel length ($V_A \\propto L$), since longer channels have less channel-length modulation.\n\n$$r_o = \\frac{V_A}{I_D}$$\n\n| Quantity | Change |\n|----------|--------|\n| $V_A$ | Doubles ($V_A \\propto L$) |\n| $I_D$ | Unchanged ($W/L$ constant) |\n| $r_o$ | **Doubles** |\n\n---\n\n## Intrinsic Gain Result\n\n$$A_v = g_m \\cdot r_o \\longrightarrow g_m \\cdot 2r_o = \\boxed{2 \\cdot A_v}$$\n\n**The intrinsic gain doubles.**\n\n---\n\n## Why W Doesn't Matter\n\nThis result reveals an important scaling law. Expressing the gain explicitly:\n\n$$A_v = g_m r_o = \\underbrace{\\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_T)}_{g_m} \\cdot \\underbrace{\\frac{V_A' L}{I_D}}_{r_o} = \\frac{2V_A' L}{V_{GS}-V_T}$$\n\n$$\\boxed{A_v \\propto L}$$\n\nThe W-dependence **cancels entirely** — doubling W doubles both $g_m$ and $I_D$, which halves $r_o$, leaving $A_v$ unchanged. Only the **L doubling** (through increased $V_A$) is responsible for the gain improvement.",
        "format": "markdown",
        "sha256": "4aeff218d0abc3bffba628a76b8cb9a4dd3c271e45853c67b6bc5851cfbe12e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with constant overdrive, gm and ID remain approximately unchanged while ro increases with channel length. The scaling argument is consistent with the golden solution.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 4872,
        "total_tokens": 4902,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4276,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 4872,
        "total_tokens": 4902,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4276,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# MOSFET Transconductance vs. Overdrive Voltage\n\n## Derivation\n\nFor a MOSFET in saturation, the drain current is:\n\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}V_{OV}^2$$\n\nTransconductance is defined as $g_m = \\frac{\\partial I_D}{\\partial V_{GS}}$, so:\n\n$$\\boxed{g_m = \\mu_n C_{ox}\\frac{W}{L}\\,V_{OV}}$$\n\n## Answer: **Student A is correct**\n\n$g_m$ is **directly proportional** to the overdrive voltage $V_{OV} = V_{GS} - V_T$. As overdrive increases, transconductance increases linearly.\n\n## Addressing the Potential Confusion\n\nStudent B may have been thinking of the alternative expression:\n\n$$g_m = \\frac{2I_D}{V_{OV}}$$\n\nThis form *looks* like $g_m$ decreases with $V_{OV}$, but only if $I_D$ is held **constant** (i.e., comparing different-sized devices biased at the same current). For a **given device** with increasing $V_{OV}$, $I_D \\propto V_{OV}^2$, so $g_m$ still rises as $V_{OV}$.\n\n| Expression | Insight |\n|------------|---------|\n| $g_m = k_n V_{OV}$ | $g_m \\uparrow$ as $V_{OV} \\uparrow$ (fixed device) |\n| $g_m = \\sqrt{2k_n I_D}$ | $g_m \\uparrow$ as $I_D \\uparrow$ |\n| $g_m = 2I_D/V_{OV}$ | Only decreasing if $I_D$ is artificially fixed |\n\n**Student A is correct.**",
        "format": "markdown",
        "sha256": "14fed50cbba624459473b37803db7888759ee47aab7189c3ce4937c5a7ab3a94"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A for a fixed device, derives the square-law relationship showing gm increases with VOV, and explains that Student B's conclusion applies only when ID is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 1662,
        "total_tokens": 1702,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 1662,
        "total_tokens": 1702,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of MOSFET Transconductance vs. Overdrive Voltage\n\n### The Relevant Equations\n\nFor a MOSFET in saturation, the drain current is:\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}V_{OV}^2$$\n\nTaking the derivative to find transconductance:\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\mu_n C_{ox}\\frac{W}{L}V_{OV}$$\n\n### Result\n\nSince $g_m$ is **directly proportional** to $V_{OV}$:\n\n$$\\boxed{g_m = \\mu_n C_{ox}\\frac{W}{L}V_{OV}}$$\n\n**Student A is correct** — transconductance increases linearly with overdrive voltage.\n\n### Why Student B Might Be Confused\n\nStudent B may have been thinking of the alternative expression:\n$$g_m = \\frac{2I_D}{V_{OV}}$$\n\nThis form *looks* like $g_m$ decreases with $V_{OV}$, but this is misleading — it assumes $I_D$ is held **constant**. If $V_{OV}$ increases while $I_D$ is fixed, you're actually changing the device geometry ($W/L$), not operating the same transistor at a higher overdrive.\n\nWhen $V_{GS}$ (and thus $V_{OV}$) genuinely increases on a given device, $I_D$ rises as $V_{OV}^2$, and $g_m$ rises linearly with $V_{OV}$.",
        "format": "markdown",
        "sha256": "a095f42fbf333f2b1013d5f81a8d5bc2ff9646abdfa6bbf44cad8ee536e983bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes Student A is right for a fixed device, derives the linear increase of gm with VOV, and explains that Student B’s result applies when ID is held constant.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 945,
        "total_tokens": 985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 945,
        "total_tokens": 985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## MOSFET Transconductance vs. Overdrive Voltage\n\n**Student A is correct.**\n\n### Derivation\n\nFor a MOSFET in saturation, the drain current is:\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}V_{OV}^2$$\n\nTransconductance is defined as $g_m = \\partial I_D / \\partial V_{GS}$, so:\n\n$$\\boxed{g_m = \\mu_n C_{ox}\\frac{W}{L}V_{OV}}$$\n\nSince $\\mu_n$, $C_{ox}$, $W$, and $L$ are fixed device parameters, **$g_m$ increases linearly with overdrive voltage** $V_{OV} = V_{GS} - V_{th}$.\n\n### Equivalent Forms\n\nThe relationship can also be written as:\n$$g_m = \\frac{2I_D}{V_{OV}} = \\sqrt{2\\mu_n C_{ox}\\frac{W}{L} \\cdot I_D}$$\n\nAll three forms confirm the same behavior: increasing $V_{OV}$ raises both $I_D$ (quadratically) and $g_m$ (linearly).\n\n### Why Student B Might Be Confused\n\nStudent B may be thinking of the **efficiency ratio** $g_m/I_D = 2/V_{OV}$, which *does* decrease with higher overdrive. This means a MOSFET biased at high $V_{OV}$ produces less transconductance **per unit of bias current** — but the absolute value of $g_m$ still increases.",
        "format": "markdown",
        "sha256": "428aaeba8c3577e3ffda0a42693173f703c5ee524b8c503bca1f562d7e5230a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size and explains that increasing overdrive raises drain current quadratically and gm linearly. It also appropriately distinguishes the fixed-current gm/ID relationship.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 1709,
        "total_tokens": 1749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1306,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 1709,
        "total_tokens": 1749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1306,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Small-Signal Model: PMOS vs. NMOS\n\n## Answer: Yes — They Are Identical\n\nThe small-signal model for a PMOS device has **exactly the same topology** as an NMOS device, since the model is simply a linearization of the device characteristics around a DC bias point.\n\n## The Universal Small-Signal Model\n\n```\n     G ──────────────────────────┬──── D\n                                 │\n         +                  gmvgs↑   ro\n        vgs                      │\n         -                       │\n     S ──────────────────────────┴──── S\n```\n\nBoth NMOS and PMOS share:\n\n| Element | Expression |\n|---------|-----------|\n| Transconductance | $g_m = \\sqrt{2\\mu C_{ox}(W/L)|I_D|}$ |\n| Output resistance | $r_o = \\frac{1}{\\lambda|I_D|}$ |\n| Controlled source | $g_m v_{gs}$ |\n| Body effect (if applicable) | $g_{mb}\\, v_{bs}$ |\n\n## Key Points\n\n1. **All small-signal parameters ($g_m$, $r_o$, $C_{gs}$, $C_{gd}$) are positive** for both device types\n2. The controlling variable is **always** $v_{gs}$ (small-signal gate-to-source voltage)\n3. The sign conventions are absorbed into the **DC bias analysis** — by the time you write small-signal equations, the model form is identical\n4. The difference in carrier type (electrons vs. holes) affects only the **magnitude** of parameters (via $\\mu_n$ vs. $\\mu_p$), not the model structure\n\n## Practical Implication\n\nThis equivalence greatly simplifies CMOS circuit analysis — you apply the **same analysis techniques** to both NMOS and PMOS transistors using the identical small-signal model.",
        "format": "markdown",
        "sha256": "11139eff2aab3182c9b03d79b77b594fea78c391d3640eb3c529cadf6ac09027"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model, which earns full credit under the golden solution's explicit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1994,
        "total_tokens": 2023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1533,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1994,
        "total_tokens": 2023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1533,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Small-Signal Models: PMOS vs. NMOS\n\n**Yes — the small-signal model topology is identical for both PMOS and NMOS devices.**\n\n### The Universal MOSFET Small-Signal Model\n\nBoth device types are represented by the same equivalent circuit:\n\n```\n    G ──┬──────────────────────────┐\n        │                          │\n       (open)   gmvgs ↑    ro      │\n        │       (D→S)   (D to S)   │\n    S ──┴──────────────────────────┘ D\n```\n\nThe small-signal drain current is:\n$$i_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}$$\n\n### Parameter Expressions (Same Form, Different Values)\n\n| Parameter | NMOS | PMOS |\n|-----------|------|------|\n| $g_m$ | $\\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{tn})$ | $\\mu_p C_{ox}\\frac{W}{L}(V_{SG}-\\|V_{tp}\\|)$ |\n| $r_o$ | $\\frac{1}{\\lambda I_D}$ | $\\frac{1}{\\lambda \\|I_D\\|}$ |\n\n### Key Points\n\n1. **Topology is identical** — same $g_m v_{gs}$ controlled source and $r_o$.\n2. **Differences appear only in the DC bias analysis** (PMOS uses $V_{SG}$ and $V_{SD}$, with the source tied to the higher potential).\n3. **Both $g_m$ and $r_o$ are positive** in both cases when defined consistently.\n4. The difference in carrier mobility ($\\mu_p \\approx \\frac{1}{2}\\mu_n$) means PMOS generally has lower $g_m$ for the same bias current and $(W/L)$.\n\n### Practical Implication\n\nThis identical small-signal representation is why **complementary (CMOS) circuit analysis** is straightforward — once the DC operating point is established, AC analysis treats NMOS and PMOS identically.",
        "format": "markdown",
        "sha256": "bdc82520c05bd3aa698d731a805f1f34fd2f6595192922aed16d147d3caa7973"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer correctly says the PMOS small-signal model has the same topology/form as the NMOS model, which earns full credit under the golden solution’s explicit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 2930,
        "total_tokens": 2959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2402,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 2930,
        "total_tokens": 2959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2402,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Small-Signal Model: PMOS vs. NMOS\n\n**Yes — the small-signal models are identical in form.**\n\n### Why They Are the Same\n\nThe small-signal model is derived by **linearizing** the large-signal equations around the DC operating point $Q$. This linearization process yields the same circuit topology regardless of device polarity:\n\n| Element | Expression | Present in both? |\n|---------|-----------|-----------------|\n| Transconductance source | $g_m v_{gs}$ | ✓ Yes |\n| Output resistance | $r_o = \\frac{1}{\\lambda I_D}$ | ✓ Yes |\n| Gate capacitances | $C_{gs},\\; C_{gd}$ | ✓ Yes |\n| Body-effect source | $g_{mb}\\, v_{bs}$ | ✓ Yes (if applicable) |\n\n### Key Points\n\n1. **Same topology**: the controlled current source $g_m v_{gs}$ points from drain to source in both cases; $r_o$ connects drain to source in both.\n\n2. **Parameters are still positive**: For PMOS biased at its Q-point,\n$$g_m = \\mu_p C_{ox}\\frac{W}{L}(V_{SG}-|V_{tp}|) > 0, \\qquad r_o = \\frac{|V_A|}{I_{D,Q}} > 0$$\n\n3. **DC biasing differs**: PMOS requires $V_{SG} > |V_{tp}|$ and $V_{SD} > V_{SG} - |V_{tp}|$, but once the Q-point is established, the incremental model is structurally identical.\n\n### Summary\n\nThe **topology** (and therefore all AC analysis techniques) is the same for both device types. Only the **DC biasing conditions** and the **numerical values** of $g_m$, $r_o$, etc., differ between PMOS and NMOS.",
        "format": "markdown",
        "sha256": "ef39a219373a95a52ba4039d40c6e5cca4d949672d7de8fdfbf4156d75d228ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer correctly says the PMOS small-signal model is identical in form, which the golden solution explicitly awards full credit for.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 2032,
        "total_tokens": 2061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1558,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 2032,
        "total_tokens": 2061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1558,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Analysis: Diode-Connected NMOS M₁\n\n### Configuration\nIn this circuit, **gate is tied to drain** (VG = VD = VX), so:\n$$V_{GS} = V_{DS} = V_X$$\n\n### Operating Region Determination\n\nSince $V_{DS} = V_{GS}$, checking saturation condition:\n$$V_{DS} \\geq V_{GS} - V_{tn} \\implies V_{GS} \\geq V_{GS} - V_{tn} \\implies V_{tn} \\geq 0 \\checkmark$$\n\nA diode-connected NMOS is **always in saturation** when conducting.\n\n### I–V Expressions\n\n| Condition | Region | $I_X$ |\n|-----------|--------|--------|\n| $V_X < V_{tn}$ | Cutoff | $0$ |\n| $V_X \\geq V_{tn}$ | Saturation | $\\dfrac{1}{2}\\mu_n C_{ox}\\dfrac{W}{L}(V_X - V_{tn})^2$ |\n\n### IX vs. VX Sketch\n\n$$\\boxed{I_X = \\begin{cases} 0 & V_X < V_{tn} \\\\ \\tfrac{k}{2}(V_X - V_{tn})^2 & V_X \\geq V_{tn} \\end{cases}}$$\n\n```\n IX\n  │                          ⟋\n  │                        ⟋\n  │                      ⟋  (parabolic)\n  │                    ⟋\n  │                  ⟋\n  │                ⟋\n  │───────────────•────────────── VX\n                 Vtn\n  (IX = 0 for VX < Vtn)\n```\n\n### Key Features\n- **Zero current** for all $V_X < V_{tn}$ (transistor off)\n- **Parabolic rise** beginning at $V_X = V_{tn}$ (inflection point at origin of parabola)\n- Operates **exclusively in saturation** (no triode region possible)\n- Curve lies entirely in the **first quadrant**",
        "format": "markdown",
        "sha256": "1570effe33518a3885e150eda3dc40b7449ecf61558fc329b42d4e960622ab18"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives approximately zero current below threshold and a quadratic rise above it, with the diode-connected NMOS in saturation when conducting. The negative-VX and terminology imprecisions are secondary to the requested sketch.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1298,
        "output_tokens": 3241,
        "total_tokens": 4539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1298,
        "output_tokens": 3241,
        "total_tokens": 4539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Diode-Connected NMOS: I–V Characteristic\n\n## Circuit Analysis\n\nSince the **gate is tied to the drain**, this is a **diode-connected** NMOS (M₁):\n\n$$V_{GS} = V_{DS} = V_X, \\quad V_S = 0$$\n\n### Saturation Check\nFor NMOS saturation: $V_{DS} \\geq V_{GS} - V_{TN}$\n\n$$V_X \\geq V_X - V_{TN} \\implies V_{TN} \\geq 0 \\checkmark \\quad \\text{(always satisfied when ON)}$$\n\n∴ The transistor is **always in saturation** when conducting.\n\n## Operating Regions\n\n| Condition | Region | $I_X$ |\n|-----------|--------|--------|\n| $V_X < V_{TN}$ | Cutoff | $0$ |\n| $V_X \\geq V_{TN}$ | Saturation | $\\dfrac{K_n}{2}(V_X - V_{TN})^2$ |\n\n## I–V Sketch\n\n$$\\boxed{I_X = \\frac{K_n}{2}(V_X - V_{TN})^2, \\quad V_X \\geq V_{TN}}$$\n\n```\n  IX\n  │                            ⟋\n  │                          ⟋\n  │                        ⟋\n  │                      ⟋  (quadratic)\n  │                    ⟋\n  │                  ╱\n  │                ╱\n  ├───────────────•──────────────── VX\n  0            V_TN\n```\n\n**Key features:**\n- $I_X = 0$ for $V_X < V_{TN}$ (flat, along the axis)\n- Curve begins at $(V_{TN},\\, 0)$ with **zero slope** (since $dI_X/dV_X = K_n(V_X-V_{TN})\\big|_{V_{TN}}=0$)\n- Grows as a **square-law parabola** for $V_X > V_{TN}$",
        "format": "markdown",
        "sha256": "72d5f325985f7c5d1beb0a733b50c9f72a3d4284efe870d29d6143619f5fb6ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, shows it is in saturation when on, and gives approximately zero current below threshold followed by a quadratic rise above threshold.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1298,
        "output_tokens": 1903,
        "total_tokens": 3201,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1363,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1298,
        "output_tokens": 1903,
        "total_tokens": 3201,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1363,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Diode-Connected MOSFET I–V Analysis\n\n## Circuit Configuration\n\nIn this circuit, M₁ has its **gate shorted to its drain** (diode-connected), so:\n$$V_{GS} = V_{DS} = V_X, \\quad V_S = 0$$\n\n## Operating Region Analysis\n\n**Check saturation condition:**\n$$V_{DS} \\geq V_{GS} - V_{th} \\implies V_X \\geq V_X - V_{th} \\implies V_{th} \\geq 0 \\checkmark$$\n\nA diode-connected NMOS is **always in saturation** when conducting (never enters triode).\n\n## Drain Current Equations\n\n| Condition | Region | $I_X$ |\n|-----------|--------|--------|\n| $V_X < V_{th}$ | Cutoff | $I_X = 0$ |\n| $V_X \\geq V_{th}$ | Saturation | $I_X = \\dfrac{1}{2}\\mu_n C_{ox}\\dfrac{W}{L}(V_X - V_{th})^2$ |\n\n## I–V Sketch\n\n$$\\boxed{I_X = \\frac{k_n}{2}(V_X - V_{th})^2 \\cdot u(V_X - V_{th})}$$\n\n```\n  IX\n  ↑\n  |                        .(parabola)\n  |                    .\n  |                 .\n  |              .\n  |           .\n  |        .\n  |_______.________________________→ VX\n  0      Vth\n```\n\n**Key features:**\n- **Zero current** for $V_X < V_{th}$ (flat along x-axis)\n- **Square-law (parabolic)** rise beginning at $V_X = V_{th}$\n- Curve is smooth with no slope discontinuity at $V_{th}$ (starts with zero slope)\n- No kink from triode/saturation transition — stays in saturation throughout",
        "format": "markdown",
        "sha256": "1c7b13c3994f05c73dce112aa30a2c74457302b6d218e14e5459a94a687e5a84"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold, and shows the quadratic rise above threshold; its saturation reasoning is also correct.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1298,
        "output_tokens": 2196,
        "total_tokens": 3494,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1701,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1298,
        "output_tokens": 2196,
        "total_tokens": 3494,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1701,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# IX vs. VX Analysis for NMOS Circuit\n\n## Circuit Identification\n\nFrom the figure:\n- **Gate**: VX (from voltage source)\n- **Source**: Ground → VGS = VX\n- **Drain**: Connected to 1 V supply → VDS = 1 V (fixed)\n- IX = drain current flowing into M₁\n\n---\n\n## Operating Regions\n\n### Region 1 — Cutoff (VX < V_TN)\n$$\\boxed{I_X = 0}$$\n\n### Region 2 — Saturation (V_TN ≤ VX ≤ V_TN + 1)\nCondition: VDS ≥ VGS − V_TN → 1 ≥ VX − V_TN\n$$\\boxed{I_X = \\frac{k_n}{2}(V_X - V_{TN})^2}$$\n\n### Region 3 — Triode (VX > V_TN + 1)\nCondition: VDS < VGS − V_TN → 1 < VX − V_TN\n$$\\boxed{I_X = k_n\\!\\left[(V_X - V_{TN})(1) - \\frac{1}{2}\\right]}$$\n\n> At the transition (VX = V_TN + 1): slope = kn · VDS = kn (continuous ✓)\n\n---\n\n## IX vs. VX Sketch\n\n```\nIX\n |                              /  (linear, slope = kn)\n |                            /\n |          ___,---'        /\n |       ,-'  (parabolic) /\n |      /               /\n |     /             ,-'\n |    /           ,-'\n |   /         ,-'\n |  /       ,-'\n | /     ,-'\n |/   ,-'\n +----+----------+----------→ VX\n    V_TN      V_TN+1\n      ↑           ↑\n  turns ON    sat→triode\n              transition\n```\n\n| VX range | Behavior | Shape |\n|----------|----------|-------|\n| VX < V_TN | IX = 0 | Flat (zero) |\n| V_TN to V_TN+1 | Quadratic in VX | Parabola |\n| VX > V_TN+1 | Linear in VX | Straight line |\n\n**Key feature**: The curve transitions smoothly from parabolic (saturation) to linear (triode) at VX = V_TN + 1 V because the slope is continuous at that point.",
        "format": "markdown",
        "sha256": "6887d064bdc9d6d1a9d67e88aa17006132828759f929e630f3d80b444c705e96"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, quadratic saturation region up to VX = VTN + 1 V, and roughly linear triode-region rise beyond it.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 3555,
        "total_tokens": 5007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2901,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 3555,
        "total_tokens": 5007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2901,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# IX vs VX Analysis for MOSFET Circuit\n\n## Circuit Configuration\n\nFrom the circuit:\n- **Gate:** connected to VX → VGS = VX\n- **Source:** grounded → VS = 0\n- **Drain:** fixed at 1 V → VDS = 1 V\n\n## Operating Region Analysis\n\n### Region 1 — Cutoff (VX < VTH)\n$$\\boxed{I_X = 0}$$\n\n### Region 2 — Saturation (VTH ≤ VX ≤ 1 + VTH)\nCondition: VDS ≥ VGS − VTH → 1 ≥ VX − VTH\n$$\\boxed{I_X = \\frac{k}{2}(V_X - V_{TH})^2}$$\n\n### Region 3 — Triode (VX > 1 + VTH)\nCondition: VDS < VGS − VTH → 1 < VX − VTH\n$$\\boxed{I_X = k\\!\\left[(V_X - V_{TH})(1\\,\\text{V}) - \\frac{(1\\,\\text{V})^2}{2}\\right] = k\\!\\left(V_X - V_{TH} - 0.5\\right)}$$\n\n> The transition is **smooth** because the slope $dI_X/dV_X = k(V_X-V_{TH})\\big|_{V_X=1+V_{TH}} = k$ matches the constant triode slope $k$.\n\n## Sketch\n\n```\nIX\n |                              /  (linear, slope = k)\nk/2 - - - - - - - - - - - - - *\n |                          ↗  (sat/triode boundary)\n |                       ↗\n |                    ↗  (parabolic)\n |                 ↗\n |_______________*_________________________ VX\n 0             VTH        1+VTH\n               ↑             ↑\n           turn-on     triode onset\n```\n\n| Region | VX range | IX behavior |\n|--------|----------|-------------|\n| OFF | VX < VTH | IX = 0 (flat) |\n| **Saturation** | VTH ≤ VX ≤ 1+VTH | Parabolic ↗ |\n| **Triode** | VX > 1+VTH | Linear ↗ (slope = k) |\n\nThe curve begins at **(VTH, 0)**, rises parabolically, then transitions seamlessly to a **linear increase** at VX = 1 + VTH where IX = k/2.",
        "format": "markdown",
        "sha256": "baca00885233c2bb1e0ed4bdce214809dc1855a48238d0e5a20e74f2d5652290"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, quadratic saturation up to VX = VTH + 1 V, and the roughly linear triode-region rise beyond the boundary.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 3465,
        "total_tokens": 4917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2790,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 3465,
        "total_tokens": 4917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2790,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Analysis\n\n**Identifying the conditions:**\n\nFrom the circuit, with the source grounded:\n- **Gate voltage:** $V_{GS} = V_X$\n- **Drain voltage:** $V_{DS} = 1\\text{ V}$ (fixed by the 1 V source)\n\n---\n\n## Operating Regions\n\n**OFF (Cutoff):** $V_X < V_{th}$\n$$I_X = 0$$\n\n**Saturation:** $V_{th} \\leq V_X \\leq (1 + V_{th})$\n$$\\boxed{I_X = \\frac{\\mu_n C_{ox}}{2}\\frac{W}{L}(V_X - V_{th})^2} \\quad \\longleftarrow \\text{quadratic}$$\n\n**Triode (Linear):** $V_X > (1 + V_{th})$\n$$\\boxed{I_X = \\mu_n C_{ox}\\frac{W}{L}\\left[(V_X - V_{th})(1) - \\frac{1}{2}\\right]} \\quad \\longleftarrow \\text{linear in } V_X$$\n\nThe boundary occurs when $V_{DS} = V_{GS} - V_{th}$, i.e., $V_X = 1 + V_{th}$.\n\n---\n\n## Sketch of $I_X$ vs. $V_X$\n\n$$\n\\begin{array}{c}\nI_X \\uparrow \\\\\n\\quad \\Big| \\qquad\\qquad\\qquad\\quad\\nearrow \\text{ (linear, slope} = \\mu C_{ox}\\frac{W}{L}\\text{)}\\\\\n\\quad \\Big| \\qquad\\quad\\nearrow \\text{(parabola)}\\\\\n\\quad \\Big| \\nearrow\\\\\n\\quad \\Big|\\_\\_\\_ \\\\\n\\quad 0 \\quad V_{th} \\quad 1{+}V_{th} \\quad\\quad\\rightarrow V_X\n\\end{array}\n$$\n\n| Region | Behavior |\n|--------|----------|\n| $V_X < V_{th}$ | $I_X = 0$ (flat) |\n| $V_{th} \\leq V_X \\leq 1+V_{th}$ | $I_X$ rises as a **parabola** |\n| $V_X > 1 + V_{th}$ | $I_X$ rises **linearly** |\n\n> **Key feature:** The curve transitions **smoothly** from parabolic to linear at $V_X = 1 + V_{th}$ (both value and slope are continuous at the boundary).",
        "format": "markdown",
        "sha256": "42f118b5606e0d43a642150f4ed789837c3ce6dccd068b8d7a61113529eb1122"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, the quadratic saturation region up to VX = VTH + 1 V, and the roughly linear triode-region rise beyond it, with matching boundary formulas.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 2983,
        "total_tokens": 4435,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2329,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 2983,
        "total_tokens": 4435,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2329,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of the Diode-Connected MOSFET\n\n### Circuit Configuration\n\nThe figure shows MOSFET M₁ in a **diode-connected** configuration:\n- Gate is shorted to Drain → $V_{GS} = V_{DS} = V_X$\n- Source connected to ground\n- Current $I_X$ flows into the drain\n\n### Current–Voltage Relationship\n\nWith $V_{GS} = V_{DS}$, the device is always in saturation (since $V_{DS} \\geq V_{GS} - V_{TH}$ requires $V_{TH} \\geq 0$ ✓). The drain current is:\n\n$$\\boxed{I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS} - V_{TH})^2 = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2}$$\n\nThe current **depends strongly on $V_X$** — it is not constant.\n\n### Output Impedance\n\nThe small-signal output resistance looking into the drain is:\n\n$$r_{out} \\approx \\frac{1}{g_m} \\quad \\text{(low impedance, typically } \\sim 1/g_m\\text{)}$$\n\n### Verdict: ❌ Cannot Act as a Current Source\n\n| Property | Ideal Current Source | Diode-Connected MOSFET |\n|----------|---------------------|------------------------|\n| $I$ vs. $V$ | $I = $ constant | $I \\propto (V_X - V_{TH})^2$ |\n| Output impedance | $\\infty$ | $\\approx 1/g_m$ (low) |\n\n**No**, this device cannot act as a current source because $I_X$ is a strong function of the terminal voltage $V_X$. It behaves instead as a **nonlinear resistor** (similar to a diode).\n\n> For a proper MOSFET current source, the gate voltage must be **fixed independently** of the drain voltage, with the transistor biased in saturation so that $I_D \\approx \\text{const}$ for varying $V_{DS}$.",
        "format": "markdown",
        "sha256": "defdbde5b89aed55613164373987571cf9a24c06cb979eb6b54266b100ab1094"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly concludes that the diode-connected device has low output impedance (about 1/gm) and cannot act as a current source. However, it misreads M1 as an NMOS with its source grounded and current entering its drain; the figure shows a PMOS with its source at the top, so the device identity and terminal connections are wrong.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 574,
        "output_tokens": 4112,
        "total_tokens": 4686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 574,
        "output_tokens": 4112,
        "total_tokens": 4686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of the Circuit\n\n### Circuit Identification\n\nThe figure shows MOSFET **M₁** (depletion-mode NMOS) configured with:\n- **Gate** connected to ground → $V_G = 0$\n- **Source** connected to ground → $V_S = 0$\n- **Drain** connected to the external terminal carrying $I_X$\n\nThis gives $V_{GS} = V_G - V_S = 0$.\n\n---\n\n### Operating Conditions\n\nSince M₁ is a **depletion-mode** device ($V_T < 0$), it **conducts** at $V_{GS} = 0$ because $V_{GS} > V_T$.\n\nFor the transistor to be in **saturation**, the following must hold:\n\n$$V_{DS} \\geq V_{GS} - V_T = 0 - V_T = |V_T|$$\n\n---\n\n### Current Source Behavior\n\nIn saturation, the drain current is:\n\n$$\\boxed{I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS} - V_T)^2 = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}V_T^2 = I_{DSS}}$$\n\n| Property | Value |\n|---|---|\n| Output current | $I_X = I_{DSS}$ (constant) |\n| Dependence on $V_X$ | **None** (ideal), small via $\\lambda$ |\n| Output resistance | $r_{out} = r_O = \\dfrac{1}{\\lambda I_{DSS}}$ (large) |\n\n---\n\n### Conclusion\n\n**Yes**, the device **can** act as a current source. With $V_{GS} = 0$ and operation in saturation ($V_X > |V_T|$), the drain current $I_X = I_{DSS}$ is approximately **independent of the terminal voltage** $V_X$, satisfying the defining property of a current source. The finite output resistance $r_O$ makes it a practical (non-ideal) current source.",
        "format": "markdown",
        "sha256": "85f337cf41e0f4c5cbf45f3cb30f1d7e63bba73520218bf095ab3f3fc91bf3f2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly reads M₁ as a depletion NMOS and concludes it can act as a current source. As drawn, M₁ is a diode-connected PMOS with low small-signal impedance, so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 574,
        "output_tokens": 15945,
        "total_tokens": 16519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15424,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 574,
        "output_tokens": 15945,
        "total_tokens": 16519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15424,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of the Circuit as a Current Source\n\n### Circuit Configuration\n\nFrom the figure, MOSFET M₁ has:\n- **Gate** connected to ground → $V_G = 0$\n- **Source** connected to ground → $V_S = 0$\n- **Drain** connected to $I_X$\n\nTherefore: $V_{GS} = V_G - V_S = 0\\text{ V}$\n\n---\n\n### Key Condition: Saturation Region\n\nA MOSFET acts as a current source when biased in **saturation**, where:\n\n$$I_X = I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS} - V_{th})^2 \\quad \\text{(independent of } V_{DS}\\text{)}$$\n\n---\n\n### Two Cases\n\n| Device Type | $V_{th}$ | Condition | Behavior |\n|---|---|---|---|\n| **Enhancement-mode** NMOS | $V_{th} > 0$ | $V_{GS} = 0 < V_{th}$ → **Cutoff** | $I_X = 0$ (open circuit) — **NOT** a useful current source |\n| **Depletion-mode** NMOS | $V_{th} < 0$ | $V_{GS} = 0 > V_{th}$ → **Device ON** | In saturation: $I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}V_{th}^2 = \\text{const.}$ ✓ |\n\n---\n\n### Conclusion\n\n> **Yes**, the device **can** act as a current source, provided M₁ is a **depletion-mode NMOS** (or any device with $V_{th} \\leq 0$).\n\nWith $V_{DS} \\geq |V_{th}|$ (saturation), the drain current is **constant and independent of $V_{DS}$**, delivering a fixed current:\n\n$$\\boxed{I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}V_{th}^2}$$\n\nFor a standard **enhancement-mode** NMOS ($V_{th} > 0$), the transistor is in **cutoff** ($V_{GS} = 0 < V_{th}$), so $I_X = 0$ and the circuit behaves as an **open circuit** — not a useful current source.",
        "format": "markdown",
        "sha256": "85d63b87fc5b9aa0f2b5488aee0848a3a37feb6b2c0f6ab0abfa3aa140a4369a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads M1 as an NMOS with its source grounded, rather than the diode-connected PMOS shown. It therefore misses the low-impedance behavior and concludes that the device can act as a current source under a depletion-mode assumption.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 574,
        "output_tokens": 11501,
        "total_tokens": 12075,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10893,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 574,
        "output_tokens": 11501,
        "total_tokens": 12075,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10893,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the PMOS Common-Source Amplifier\n\n## Circuit Identification\n\n**M₁ is a PMOS transistor** in a **Common-Source (CS) configuration** with:\n- **Source (S):** top terminal → $R_S$ → $V_{DD}$ *(source degeneration)*\n- **Gate (G):** $V_{in}$ (input)\n- **Drain (D):** $V_{out}$ node → $R_D$ → GND *(drain load)*\n\n---\n\n## DC (Large-Signal) Analysis\n\nFor M₁ in the **saturation region**:\n\n$$I_D = \\frac{\\mu_p C_{ox}}{2}\\cdot\\frac{W}{L}(V_{SG}-|V_{tp}|)^2$$\n\n| Quantity | Expression |\n|---|---|\n| Source voltage | $V_S = V_{DD} - I_D R_S$ |\n| Overdrive | $V_{OV} = V_{SG} - \\|V_{tp}\\| = (V_S - V_{in}) - \\|V_{tp}\\|$ |\n| Output voltage | $V_{out} = I_D R_D$ |\n| **Saturation condition** | $V_{SD} \\geq V_{OV} \\;\\Rightarrow\\; V_{out} \\leq V_{in}+\\|V_{tp}\\|$ |\n\n---\n\n## Small-Signal Analysis\n\n**Small-signal parameters** at the bias point $I_{DQ}$:\n\n$$g_m = \\sqrt{2\\mu_p C_{ox}\\tfrac{W}{L}\\,I_{DQ}}, \\qquad r_o = \\frac{1}{\\lambda\\, I_{DQ}}$$\n\nApplying **KCL** at the source and drain nodes of the small-signal equivalent circuit:\n\n$$v_s = i_D R_S, \\qquad i_D = -\\frac{v_{out}}{R_D}$$\n\nSubstituting into $i_D = g_m(v_{in}-v_s)+(v_{out}-v_s)/r_o$ and solving:\n\n### ① Voltage Gain\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_m r_o R_D}{r_o(1+g_m R_S)+R_D+R_S}}$$\n\nFor large $r_o$ (neglecting channel-length modulation):\n\n$$A_v \\approx -\\frac{g_m R_D}{1+g_m R_S}$$\n\n> - **Negative sign** → inverting amplifier  \n> - **Denominator $(1+g_m R_S)$** → gain reduced by source degeneration  \n> - If $g_m R_S \\gg 1$: $\\;A_v \\approx -R_D/R_S$ (gain set by resistance ratio, process-independent)\n\n### ② Input Resistance\n\n$$\\boxed{R_{in} = \\infty}$$\n\n### ③ Output Resistance\n\nSetting $v_{in}=0$ and looking into the drain:\n\n$$\\boxed{R_{out} = R_D \\;\\Big\\|\\; \\underbrace{\\left[r_o + R_S(1+g_m r_o)\\right]}_{\\approx\\; r_o(1+g_mR_S)}}$$\n\nFor typical values where $R_D \\ll r_o(1+g_m R_S)$: $\\;R_{out} \\approx R_D$\n\n---\n\n## Effect of Source Degeneration $R_S$\n\n| Parameter | $R_S = 0$ | $R_S > 0$ |\n|---|---|---|\n| Gain $|A_v|$ | $g_m R_D$ (maximum) | $\\dfrac{g_m R_D}{1+g_m R_S} \\;<\\; g_m R_D$ |\n| Intrinsic $R_{out}$ | $r_o$ | $r_o(1+g_m R_S) \\;\\gg\\; r_o$ |\n| Linearity | Lower | **Higher** (negative feedback) |\n| Gain stability | Varies with $g_m$ | **Stabilized** vs. process/temp |\n\n**Physical interpretation:** $R_S$ samples the output current and feeds back a voltage to the source, reducing the net $v_{gs}$. This is **series–series negative feedback**, which simultaneously reduces gain, increases output impedance, and improves bandwidth and linearity.",
        "format": "markdown",
        "sha256": "7918872389f744041324763a35e0e67d3627114f59f2496c3366f5d2adeaa0c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS), with a consistent ro refinement.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1555,
        "output_tokens": 84563,
        "total_tokens": 86118,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 83430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1555,
        "output_tokens": 84563,
        "total_tokens": 86118,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 83430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# PMOS Common-Source Amplifier with Source Degeneration\n\n## Circuit Identification\n\nThe leftward-pointing arrow (←) on M₁ identifies it as a **PMOS enhancement-mode transistor**. With input at the gate and output at the drain, this is a **common-source (CS) configuration**:\n\n| Terminal | Connection |\n|----------|-----------|\n| Source | VDD through R_S (source degeneration) |\n| Gate | V_in (signal input) |\n| Drain | V_out / R_D to GND (load) |\n\n---\n\n## DC Biasing\n\nFor M₁ in saturation (V_SG > |V_TP|):\n\n$$I_D = \\frac{1}{2}\\mu_p C_{ox}\\frac{W}{L}(V_{SG}-|V_{TP}|)^2$$\n\n$$V_S = V_{DD} - I_D R_S, \\quad V_{out} = I_D R_D$$\n\n---\n\n## Small-Signal Analysis\n\nReplacing V_DD → AC ground, the small-signal circuit has V_S connected through R_S to ground, and V_out through R_D to ground.\n\n**KCL at source node** (v_s):\n$$g_m(v_{in}-v_s) + \\frac{v_{out}-v_s}{r_o} = \\frac{v_s}{R_S} \\tag{1}$$\n\n**KCL at drain node** (v_out):\n$$g_m(v_{in}-v_s) + \\frac{v_{out}-v_s}{r_o} + \\frac{v_{out}}{R_D} = 0 \\tag{2}$$\n\nSubtracting (1) from (2) → $v_{out} = -\\dfrac{R_D}{R_S}v_s$\n\nSubstituting back (with $r_o \\to \\infty$):\n$$v_s = \\frac{g_m R_S}{1 + g_m R_S}\\,v_{in}$$\n\n---\n\n## Key Results\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{-g_m R_D}{1 + g_m R_S}}$$\n\n**With channel-length modulation** ($r_o$ included):\n$$A_v = \\frac{-g_m R_D}{1 + g_m R_S + \\dfrac{R_S + R_D}{r_o}}$$\n\n| Parameter | Result |\n|-----------|--------|\n| Input Resistance | $R_{in} = \\infty$ |\n| Output Resistance | $R_{out} = R_D \\,\\|\\, [r_o(1+g_m R_S)+R_S]$ |\n| Output Resistance (ideal) | $R_{out} = R_D$ |\n\n---\n\n## Physical Interpretation\n\n```\n       ┌──────────────────────────────────┐\n       │  Gain:  |Av| = gm·RD / (1+gm·RS) │\n       │                                   │\n  RS=0 → |Av| = gm·(RD‖ro)   (max gain)  │\ngm·RS≫1 → |Av| ≈ RD/RS       (ratio set) │\n       └──────────────────────────────────┘\n```\n\n- **Inverting** amplifier (180° phase shift) — characteristic of CS topology\n- **R_S** provides negative feedback (source degeneration):\n  - ↑ R_S → ↓ |A_v|, but ↑ linearity and ↑ gain predictability\n  - For large degeneration: $A_v \\approx -R_D/R_S$ (independent of g_m)\n- **R_D** sets the DC operating point and load",
        "format": "markdown",
        "sha256": "aefb0ed6aa842a71e89a1554437a7381fda1ee4bfe97686468624ce36eff9a1c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS). The ro refinement is also consistent with the topology.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1555,
        "output_tokens": 47698,
        "total_tokens": 49253,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 46730,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1555,
        "output_tokens": 47698,
        "total_tokens": 49253,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 46730,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# PMOS Common-Source Amplifier with Source Degeneration\n\n## Circuit Identification\n\n**M₁ is a PMOS transistor** (source arrow points inward toward gate), configured as a **common-source amplifier**:\n- **Source (S):** connected to V_DD through R_S → *source degeneration*\n- **Drain (D):** output node V_out, connected to GND through R_D → *drain load*\n- **Gate (G):** signal input V_in\n\n---\n\n## DC Analysis\n\nFor M₁ in saturation, the quiescent drain current satisfies:\n\n$$I_D = \\frac{\\mu_p C_{ox}}{2}\\cdot\\frac{W}{L}\\cdot(V_{SG}-|V_{tp}|)^2$$\n\nwhere $V_S = V_{DD} - I_D R_S$, $V_{out,Q} = I_D R_D$, and saturation requires $V_{SD} > V_{SG} - |V_{tp}|$.\n\n---\n\n## Small-Signal Analysis\n\nSetting $V_{DD} = 0$ (AC ground), the PMOS channel current (source → drain) is:\n\n$$i_{sd} = g_m(v_s - v_{in}) + \\frac{v_s - v_{out}}{r_o}$$\n\n**KCL at source node:**\n$$-\\frac{v_s}{R_S} = i_{sd} \\quad\\Rightarrow\\quad v_s = -v_{out}\\cdot\\frac{R_S}{R_D} \\tag{1}$$\n\n**KCL at drain node:**\n$$i_{sd} = \\frac{v_{out}}{R_D} \\tag{2}$$\n\nSubstituting (1) into (2) and collecting terms:\n\n$$v_{out}\\left[\\frac{1 + g_m R_S + \\dfrac{R_S+R_D}{r_o}}{R_D}\\right] = -g_m v_{in}$$\n\n### Voltage Gain\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{-g_m R_D}{1 + g_m R_S + \\dfrac{R_S + R_D}{r_o}}}$$\n\n**Neglecting channel-length modulation** ($r_o \\to \\infty$):\n\n$$A_v \\approx \\frac{-g_m R_D}{1 + g_m R_S}$$\n\nThe **negative sign** confirms signal inversion (common-source).\n\n---\n\n## Input and Output Resistance\n\n**Input resistance:** $R_{in} = \\infty$ (insulated gate)\n\n**Output resistance** (set $v_{in}=0$, disconnect $R_D$, apply test $v_x$):\n\n$$R_{out} = R_D \\;\\|\\; \\bigl[r_o(1 + g_m R_S) + R_S\\bigr]$$\n\n---\n\n## Summary Table\n\n| Parameter | Expression |\n|:---|:---|\n| Voltage Gain (ideal) | $A_v = -g_m R_D\\;/\\;(1 + g_m R_S)$ |\n| Voltage Gain (with $r_o$) | $A_v = -g_m R_D\\;/\\;[1 + g_m R_S + (R_S+R_D)/r_o]$ |\n| Input Resistance | $R_{in} \\to \\infty$ |\n| Output Resistance | $R_{out} = R_D \\;\\|\\; [r_o(1+g_m R_S)+R_S]$ |\n\n---\n\n## Effect of Source Degeneration (R_S)\n\n| Quantity | Without R_S | With R_S |\n|:---|:---:|:---:|\n| \\|Gain\\| | $g_m R_D$ | $\\dfrac{g_m R_D}{1+g_m R_S}$ |\n| $R_{out}$ | $R_D \\| r_o$ | $R_D \\| r_o(1+g_m R_S)$ |\n\nFor $g_m R_S \\gg 1$: $|A_v| \\approx R_D/R_S$ — **gain set by resistor ratio, independent of $g_m$**, improving linearity at the cost of reduced gain magnitude.",
        "format": "markdown",
        "sha256": "f8d0bf00132dec396b3effd0f52b645ec39faf05c2a953d8d00e26832d70dbfb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a PMOS common-source stage with source degeneration and gives the correct inverting gain, satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1555,
        "output_tokens": 64845,
        "total_tokens": 66400,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 63746,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1555,
        "output_tokens": 64845,
        "total_tokens": 66400,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 63746,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# NMOS Source Follower (Common-Drain Amplifier) Analysis\n\n## Circuit Identification\n\nThis circuit is an **NMOS Source Follower** (Common-Drain configuration):\n| Terminal | Connection |\n|----------|------------|\n| Gate (G) | Input: $V_{in}$ |\n| Drain (D) | Supply: $V_{DD}$ (AC ground) |\n| Source (S) | Output: $V_{out}$ via $R_S$ to GND |\n\n---\n\n## DC Biasing\n\nFor M₁ in **saturation** ($V_{DS} \\geq V_{GS} - V_{TH}$):\n\n$$I_D = \\frac{\\mu_n C_{ox}}{2}\\frac{W}{L}(V_{GS}-V_{TH})^2 \\qquad \\text{where } V_{GS} = V_{in} - V_{out}$$\n\n$$\\boxed{V_{out,DC} = I_D \\cdot R_S}$$\n\nThe source-to-gate feedback provides **inherent self-biasing stability**.\n\n---\n\n## Small-Signal Analysis\n\nSetting $v_d = 0$, applying KCL at the output node with $v_{gs} = v_{in} - v_{out}$, $v_{bs} = -v_{out}$:\n\n$$\\frac{v_{out}}{R_S} = g_m v_{gs} + g_{mb}v_{bs} + \\frac{v_{ds}}{r_o}$$\n\n$$\\frac{v_{out}}{R_S} = g_m(v_{in}-v_{out}) - g_{mb}\\,v_{out} - \\frac{v_{out}}{r_o}$$\n\n### Voltage Gain\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m(R_S \\| r_o)}{1+(g_m+g_{mb})(R_S\\|r_o)} < 1}$$\n\n> **Simplified** (neglecting $g_{mb}$, $r_o \\to \\infty$): $\\displaystyle A_v \\approx \\frac{g_m R_S}{1 + g_m R_S}$\n\n### Input Resistance\n\n$$\\boxed{R_{in} = \\infty}$$\n\n(MOSFET gate draws no current)\n\n### Output Resistance\n\nSetting $v_{in} = 0$ and injecting test current $i_x$ at the output:\n\n$$\\boxed{R_{out} = \\frac{1}{g_m + g_{mb}} \\,\\Big\\|\\, r_o \\,\\Big\\|\\, R_S \\;\\approx\\; \\frac{1}{g_m}}$$\n\n---\n\n## Key Properties Summary\n\n| Property | Value | Comment |\n|----------|-------|---------|\n| Voltage Gain | $0 < A_v < 1$ | Non-inverting; \"source follows gate\" |\n| Phase Shift | 0° | In-phase with input |\n| $R_{in}$ | $\\to \\infty$ | Ideal for high-Z sources |\n| $R_{out}$ | $\\approx 1/g_m \\sim 100\\text{–}500\\,\\Omega$ | Low — good driving capability |\n| Body effect | Reduces $A_v \\to \\dfrac{1}{1+g_{mb}/g_m}$ | As $R_S, r_o \\to \\infty$ |\n\n---\n\n## Applications\n- **Voltage buffer** (isolates source from load)  \n- **Impedance transformation** (high-Z → low-Z)  \n- **DC level shifting** (output offset by $V_{GS} \\approx 0.5\\text{–}1\\,\\text{V}$)",
        "format": "markdown",
        "sha256": "d03dbeb68fe8bbdb6a67046f88e8877e8d81c525665c137bea268f067886260c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the required positive, less-than-unity gain, including the golden solution’s simplified expression. The added body-effect, finite-ro, and output-resistance analysis is consistent.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1259,
        "output_tokens": 11504,
        "total_tokens": 12763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10557,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1259,
        "output_tokens": 11504,
        "total_tokens": 12763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10557,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# NMOS Source Follower (Common-Drain Amplifier) Analysis\n\n## Circuit Identification\n\nThis is an **NMOS Source Follower** (Common-Drain configuration):\n| Terminal | Connection |\n|----------|------------|\n| Gate | V_in (input signal) |\n| Drain | V_DD (AC ground) |\n| Source | V_out through R_S to ground |\n\n---\n\n## DC Operating Point\n\nFor M₁ in **saturation** ($V_{DS} > V_{GS} - V_{TH}$):\n\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{TH})^2$$\n\n$$V_{GS} = V_{in} - V_{out}, \\qquad V_{out} = I_D \\cdot R_S$$\n\n---\n\n## Small-Signal Analysis\n\nUsing the small-signal model with $v_{gs} = v_{in} - v_{out}$ and $v_d = 0$:\n\n**KCL at the source (output) node:**\n\n$$g_m(v_{in}-v_{out}) - \\frac{v_{out}}{r_o} - \\frac{v_{out}}{R_S} = 0$$\n\n### Voltage Gain\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m(r_o \\| R_S)}{1 + g_m(r_o \\| R_S)} < 1}$$\n\n### Input Resistance\n\n$$R_{in} \\rightarrow \\infty \\quad \\text{(no gate current)}$$\n\n### Output Resistance\n\nSetting $v_{in} = 0$ and injecting $v_x$ at the output:\n\n$$i_x = g_m v_x + \\frac{v_x}{r_o} + \\frac{v_x}{R_S}$$\n\n$$\\boxed{R_{out} = \\frac{1}{g_m + \\dfrac{1}{r_o} + \\dfrac{1}{R_S}} = \\frac{1}{g_m} \\bigg\\| r_o \\bigg\\| R_S \\approx \\frac{1}{g_m}}$$\n\n---\n\n## Key Properties\n\n| Property | Value |\n|----------|-------|\n| Voltage Gain | $0 < A_v < 1$ (non-inverting) |\n| Input Impedance | Very high ($\\infty$) |\n| Output Impedance | Very low ($\\approx 1/g_m$) |\n| Phase shift | **None** (0°) |\n\n> **Application:** The source follower acts as a **voltage buffer** — it transfers a high-impedance source to a low-impedance output without inverting the signal, making it ideal for impedance matching.",
        "format": "markdown",
        "sha256": "b7accfbd0890b3f70f84e575c14640a759e00dc8c921a2980154bfc05c93d32e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the valid finite-r_o refinement. The supplementary output-resistance analysis is also consistent.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1259,
        "output_tokens": 10729,
        "total_tokens": 11988,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10026,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1259,
        "output_tokens": 10729,
        "total_tokens": 11988,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10026,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# NMOS Source Follower (Common-Drain Amplifier) Analysis\n\n## Circuit Identification\n\nThis is an **NMOS Source Follower** (Common-Drain configuration):\n| Terminal | Connection |\n|----------|-----------|\n| Gate (G) | $V_{in}$ (input) |\n| Drain (D) | $V_{DD}$ (supply) |\n| Source (S) | $V_{out}$ + $R_S$ to ground |\n\n---\n\n## DC Analysis\n\nFor M₁ in saturation ($V_{DS} \\geq V_{GS} - V_{TH}$):\n\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS} - V_{TH})^2, \\quad \\text{where } V_{GS} = V_{in} - V_{out}$$\n\nThe output voltage is set by:\n$$\\boxed{V_{out} = I_D \\cdot R_S}$$\n\n---\n\n## Small-Signal Analysis\n\nSetting up the small-signal model at the source node:\n\n$$v_{gs} = v_{in} - v_{out}, \\qquad v_{ds} = -v_{out}$$\n\n**KCL at the source node:**\n\n$$\\underbrace{g_m(v_{in} - v_{out})}_{\\text{controlled source}} - \\underbrace{\\frac{v_{out}}{r_o}}_{\\text{through } r_o} = \\underbrace{\\frac{v_{out}}{R_S}}_{\\text{through } R_S}$$\n\nSolving for $v_{out}/v_{in}$:\n\n---\n\n## Key Performance Metrics\n\n### ① Voltage Gain\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m(r_o \\| R_S)}{1 + g_m(r_o \\| R_S)} < 1}$$\n\nFor $r_o \\gg R_S$: $\\quad A_v \\approx \\dfrac{g_m R_S}{1 + g_m R_S} \\xrightarrow{g_m R_S \\gg 1} 1$\n\n### ② Input Resistance\n$$R_{in} = \\infty \\quad \\text{(ideal MOSFET gate)}$$\n\n### ③ Output Resistance\nSetting $v_{in} = 0$ and applying test voltage $v_x$ at the source:\n\n$$\\boxed{R_{out} = R_S \\,\\bigg\\|\\, \\frac{1}{g_m + 1/r_o} \\approx R_S \\,\\bigg\\|\\, \\frac{1}{g_m}}$$\n\n---\n\n## Summary of Properties\n\n| Property | Value | Significance |\n|----------|-------|--------------|\n| Voltage Gain $A_v$ | $< 1$, positive | No phase inversion |\n| Input Impedance | $\\infty$ | No loading of source |\n| Output Impedance | $\\approx 1/g_m$ (small) | Drives low-impedance loads |\n| Signal Phase | Non-inverting | Output tracks input |\n\n---\n\n## Applications\n\nThe source follower acts as a **voltage buffer**:\n- Isolates a high-impedance source from a low-impedance load\n- Provides level shifting (output is offset by $V_{GS}$ below input)\n- Maintains near-unity gain with high bandwidth\n\n> **Note:** If the body is tied to ground (bulk CMOS), the body effect introduces $g_{mb}$, reducing gain to $A_v = g_m/(g_m + g_{mb} + 1/r_o + 1/R_S)$.",
        "format": "markdown",
        "sha256": "e32cad5231835e34afe28d3a743ebdf5bfd1a203234782f6c0a4f54b605163d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, less-than-unity gain, including the required expression as the approximation for ro much greater than RS. The additional analysis is consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1259,
        "output_tokens": 6336,
        "total_tokens": 7595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5409,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1259,
        "output_tokens": 6336,
        "total_tokens": 7595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5409,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Source (CS) MOSFET Amplifier Analysis\n\n## Circuit Identification\n\nThis is a **common-source (CS) amplifier** with MOSFET M₁ and drain resistor R_D:\n\n| Terminal | Connection |\n|----------|-----------|\n| Gate (G) | Input → V_in |\n| Drain (D) | Output → V_out; also to R_D → V_DD |\n| Source (S) | Ground (GND) |\n\n---\n\n## DC (Large-Signal) Analysis\n\nThree operating regions exist depending on V_in:\n\n### Region 1 — Cutoff (V_in < V_tn)\n$$I_D = 0, \\qquad \\boxed{V_{out} = V_{DD}}$$\n\n### Region 2 — Saturation (V_in > V_tn and V_{out} ≥ V_{in} − V_tn)\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{in}-V_{tn})^2$$\n$$\\boxed{V_{out} = V_{DD} - \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{in}-V_{tn})^2 R_D}$$\n\n### Region 3 — Triode (V_in > V_tn and V_out < V_in − V_tn)\n$$I_D = \\mu_n C_{ox}\\frac{W}{L}\\!\\left[(V_{in}-V_{tn})V_{out} - \\frac{V_{out}^2}{2}\\right], \\quad V_{out} \\approx 0$$\n\n### Transfer Characteristic\n\n```\nV_out\n  │\nV_DD ─────•\n          │\\  Saturation (amplifying region)\n          │  \\\n          │    \\\n          │      •──────── V_in\n       V_tn    V_tn+(VDD/KnRD)^0.5\n```\n> As V_in increases, V_out **decreases** → inverting transfer characteristic.\n\n---\n\n## Small-Signal (AC) Analysis\n\nBiasing M₁ at Q-point (V_GSQ, I_DQ) in saturation:\n\n### Key Small-Signal Parameters\n\n$$g_m = \\mu_n C_{ox}\\frac{W}{L}(V_{GSQ}-V_{tn}) = \\sqrt{2\\mu_n C_{ox}\\frac{W}{L}\\,I_{DQ}}$$\n\n$$r_o = \\frac{V_A}{I_{DQ}} = \\frac{1}{\\lambda\\, I_{DQ}}$$\n\n### Small-Signal Equivalent Circuit\n\nReplacing V_DD with AC ground and M₁ with its model:\n\n$$g_m v_{gs} + \\frac{v_{out}}{r_o} + \\frac{v_{out}}{R_D} = 0$$\n\nSince $v_{gs} = v_{in}$:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_m(R_D \\| r_o) \\approx -g_m R_D}$$\n\nThe **negative sign** confirms **180° phase inversion**.\n\n### Input and Output Impedances\n\n$$R_{in} = \\infty \\qquad \\text{(no DC gate current)}$$\n\n$$R_{out} = R_D \\| r_o \\approx R_D \\qquad \\text{(for } r_o \\gg R_D)$$\n\n---\n\n## Summary\n\n| Parameter | Expression | Remark |\n|-----------|-----------|--------|\n| Voltage Gain | $-g_m(R_D \\| r_o)$ | Inverting |\n| ≈ Gain | $-g_m R_D$ | (r_o ignored) |\n| Input Impedance | $\\infty$ | Ideal gate |\n| Output Impedance | $R_D \\| r_o \\approx R_D$ | |\n| Phase Shift | **180°** | Inverting |\n\n> **Design insight:** Gain magnitude $|A_v| = g_m R_D$ can be increased by raising $R_D$, increasing $W/L$, or increasing bias current $I_{DQ}$ — subject to maintaining M₁ in saturation.",
        "format": "markdown",
        "sha256": "4d2f0525b29bb73d339bb24b9e4365a41a93101a671f87207b4a76e13f0a9e79"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as common-source: the input is actually applied to M1’s source while its gate is AC-grounded. Consequently, its inverting gain and infinite input resistance contradict the essential common-gate result (approximately +gmRD gain and 1/gm input resistance).",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1228,
        "output_tokens": 49787,
        "total_tokens": 51015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48706,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1228,
        "output_tokens": 49787,
        "total_tokens": 51015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48706,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# PMOS Common-Source Amplifier Analysis\n\n## Circuit Identification\n\nThe figure shows a **PMOS common-source (CS) amplifier** with:\n- **M₁**: PMOS transistor (arrow pointing inward ← indicates P-channel)\n- **Source (S)** → V_DD\n- **Drain (D)** → V_out (output node)  \n- **Gate (G)** → V_in (input)\n- **R_D**: drain resistance between V_DD and drain\n\n---\n\n## DC Analysis\n\n**Condition for PMOS turn-on** (V_GS < V_tp, where V_tp < 0):\n$$V_{SG} = V_{DD} - V_{in} > |V_{tp}| \\implies V_{in} < V_{DD} - |V_{tp}|$$\n\n**Saturation condition**: $V_{SD} \\geq V_{SG} - |V_{tp}|$\n\n**Drain current in saturation**:\n$$\\boxed{I_{SD} = \\frac{\\mu_p C_{ox}}{2}\\cdot\\frac{W}{L}(V_{SG} - |V_{tp}|)^2 = \\frac{\\mu_p C_{ox}}{2}\\cdot\\frac{W}{L}(V_{DD} - V_{in} - |V_{tp}|)^2}$$\n\n---\n\n## Small-Signal Analysis\n\n**Small-signal parameters** at the Q-point:\n$$g_m = \\mu_p C_{ox}\\frac{W}{L}(V_{SG,Q} - |V_{tp}|) = \\sqrt{2\\mu_p C_{ox}\\frac{W}{L}I_{SD,Q}}$$\n$$r_o = \\frac{|V_A|}{I_{SD,Q}}$$\n\n**Small-signal equivalent circuit** (V_DD → AC ground):\n\n$$\\underbrace{v_{gs} = v_{in}}_{\\text{source at AC GND}}$$\n\nApplying **KCL at drain node** (V_out):\n\n$$\\frac{v_{out}}{R_D} + \\frac{v_{out}}{r_o} + g_m v_{in} = 0$$\n\n$$v_{out}\\!\\left(\\frac{1}{R_D}+\\frac{1}{r_o}\\right) = -g_m v_{in}$$\n\n---\n\n## Key Results\n\n| Parameter | Expression |\n|-----------|-----------|\n| **Voltage Gain** | $A_v = \\dfrac{v_{out}}{v_{in}} = -g_m(R_D \\| r_o)$ |\n| **Input Resistance** | $R_{in} = \\infty$ |\n| **Output Resistance** | $R_{out} = R_D \\| r_o$ |\n\nIf $r_o \\gg R_D$:\n$$A_v \\approx -g_m R_D$$\n\n---\n\n## Physical Interpretation\n\n| V_in increases | Effect |\n|---|---|\n| V_SG decreases | ↓ PMOS conduction |\n| I_SD decreases | ↓ current at drain |\n| V_out **decreases** | → **Inverting** (180° phase shift) |\n\n> **This is an inverting amplifier** with high input impedance and voltage gain magnitude $|A_v| = g_m(R_D\\|r_o)$.",
        "format": "markdown",
        "sha256": "2cead6bd832c6f01a6f94805aef092be72892f7e64ca7757afe17937666fb124"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The input is applied to M1's source while its gate is AC-grounded, making this a common-gate stage. The answer instead treats it as a common-source stage, so its input resistance and gain sign are both wrong.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1228,
        "output_tokens": 63274,
        "total_tokens": 64502,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 62429,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1228,
        "output_tokens": 63274,
        "total_tokens": 64502,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 62429,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Source (CS) Amplifier Analysis\n\n## Circuit Identification\n\nThe circuit is a **resistively-loaded common-source amplifier** with MOSFET M₁ and drain load resistor R_D:\n- **Input:** V_in → Gate of M₁\n- **Output:** V_out at drain (junction of R_D and M₁ drain)\n- **Load:** R_D between V_DD and drain\n- **Source:** connected to GND (reference node)\n\n---\n\n## 1. DC Large-Signal Analysis\n\nApplying KVL: $V_{DD} = I_D R_D + V_{DS}$, so $V_{out} = V_{DD} - I_D R_D$\n\n| Region | Condition | Drain Current $I_D$ | Output $V_{out}$ |\n|--------|-----------|---------------------|-----------------|\n| **Cutoff** | $V_{in} < V_{tn}$ | $0$ | $V_{DD}$ |\n| **Saturation** | $V_{in} \\geq V_{tn}$; $V_{out} \\geq V_{in}-V_{tn}$ | $\\dfrac{k_n}{2}(V_{in}-V_{tn})^2$ | $V_{DD} - I_D R_D$ |\n| **Triode** | $V_{in} \\geq V_{tn}$; $V_{out} < V_{in}-V_{tn}$ | $k_n\\!\\left[(V_{in}-V_{tn})V_{out}-\\tfrac{V_{out}^2}{2}\\right]$ | $\\approx 0$ |\n\nThe **load line** is: $I_D = \\dfrac{V_{DD} - V_{out}}{R_D}$\n\nThe Q-point is the intersection of the load line with M₁'s $I_D$–$V_{DS}$ characteristic.\n\n---\n\n## 2. Voltage Transfer Characteristic (VTC)\n\n$$\\boxed{V_{out} = V_{DD} - \\frac{k_n}{2}(V_{in} - V_{tn})^2 R_D} \\quad \\text{(saturation region)}$$\n\nThe slope in the saturation region gives the large-signal gain:\n$$\\frac{dV_{out}}{dV_{in}} = -k_n(V_{in}-V_{tn})R_D = -g_m R_D < 0 \\quad \\Rightarrow \\textbf{ inverting}$$\n\n> **Note:** This circuit also acts as a digital **CMOS inverter** — LOW input gives HIGH output ($V_{DD}$), and HIGH input gives LOW output (~0).\n\n---\n\n## 3. Small-Signal Analysis\n\nBiasing M₁ in saturation at Q-point $(I_{D,Q},\\, V_{GS,Q})$:\n\n**Small-signal parameters:**\n$$g_m = k_n(V_{GS,Q} - V_{tn}) = \\sqrt{2k_n I_{D,Q}}, \\qquad r_o = \\frac{|V_A|}{I_{D,Q}} = \\frac{1}{\\lambda\\, I_{D,Q}}$$\n\n**KCL at drain node** (V_DD is AC ground; $v_{gs} = v_{in}$):\n\n$$g_m v_{in} + \\frac{v_{out}}{R_D} + \\frac{v_{out}}{r_o} = 0$$\n\nSolving:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_m\\bigl(R_D \\,\\|\\, r_o\\bigr)}$$\n\n**Input resistance:** $R_{in} = \\infty$ (insulated gate)\n\n**Output resistance** (set $v_{in}=0$, so $g_m$-source is OFF):\n\n$$R_{out} = R_D \\,\\|\\, r_o$$\n\n---\n\n## 4. Summary of Key Results\n\n| Parameter | General | Simplified ($r_o \\to \\infty$) |\n|-----------|---------|-------------------------------|\n| **Voltage gain $A_v$** | $-g_m(R_D \\| r_o)$ | $-g_m R_D$ |\n| **Phase shift** | 180° (inverting) | 180° (inverting) |\n| **$R_{in}$** | $\\infty$ | $\\infty$ |\n| **$R_{out}$** | $R_D \\| r_o$ | $R_D$ |\n\n---\n\n## 5. Key Design Insights\n\n1. **Inverting:** V_out is 180° out of phase with V_in — the hallmark of common-source topology.\n\n2. **Gain–headroom trade-off:**\n$$|A_v| = g_m R_D \\quad\\Longrightarrow\\quad \\text{Larger } R_D \\Rightarrow \\text{higher gain, but } V_{out,Q} = V_{DD} - I_{D,Q}R_D \\text{ decreases.}$$\n\n3. **Increasing $g_m$:** Use a wider transistor (larger $W/L$) or higher bias current since $g_m = \\sqrt{2k_n I_{D,Q}}$.\n\n4. **Miller effect:** At high frequencies, $C_{gd}$ is amplified at the input as $C_{gd}(1+|A_v|)$, limiting bandwidth.",
        "format": "markdown",
        "sha256": "856fe8814fed54452d02269ed8a581be0cac5f2a5603b016dd4d86725de1b643"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as common-source with a gate input and grounded source. The actual circuit is common-gate with input at the source, giving approximately Rin = 1/gm and a non-inverting gain; the candidate’s topology and central results are wrong.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1228,
        "output_tokens": 70296,
        "total_tokens": 71524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 68932,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1228,
        "output_tokens": 70296,
        "total_tokens": 71524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 68932,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Gate NMOS Amplifier Analysis\n\n## Circuit Identification\n\nThis is a **common-gate NMOS amplifier**:\n- **Gate** → DC-biased at V_b (effectively AC ground)\n- **Source** → AC input via coupling capacitor C₁\n- **Drain** → Output V_out through load R_D\n\n---\n\n## DC Bias Analysis\n\nWith C₁ blocking DC and V_GS = V_b − 0 = V_b:\n\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_b - V_{th})^2 \\quad \\text{(saturation required)}$$\n\n$$\\boxed{V_{out,DC} = V_{DD} - I_D R_D}$$\n\nThe bias-point parameters are:\n$$g_m = \\sqrt{2\\mu_n C_{ox}\\tfrac{W}{L}\\,I_D}, \\qquad r_o = \\frac{V_A}{I_D}$$\n\n---\n\n## Small-Signal (AC) Analysis\n\n**Substitutions:** C₁ → short, V_b → AC ground, V_DD → AC ground\n\nSince the gate is at AC ground:\n$$v_{gs} = v_g - v_s = 0 - v_{in} = -v_{in}$$\n\n### Voltage Gain\n\nApplying KCL at the drain node:\n\n$$\\frac{v_{out}}{R_D} + \\frac{v_{out}-v_{in}}{r_o} \\underbrace{- g_m v_{in}}_{\\text{controlled source}} = 0$$\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{(g_m r_o + 1)\\,R_D}{R_D + r_o} \\approx g_m(R_D \\| r_o)}$$\n\n> **Key:** The gain is **positive** (non-inverting) — when $v_{in}↑$, $v_{GS}↓$, $I_D↓$, so $v_{out}↑$.\n\n### Input Resistance\n\nApplying a test source $v_x$ at the source terminal:\n\n$$\\boxed{R_{in} = \\frac{R_D + r_o}{1 + g_m r_o} \\approx \\frac{1}{g_m}}$$\n\nThe input impedance is **low** (~tens of Ω).\n\n### Output Resistance\n\nWith $v_{in} = 0$: source is at AC ground, controlled source turns off:\n\n$$\\boxed{R_{out} = R_D \\| r_o}$$\n\n---\n\n## Summary\n\n| Parameter | Exact | Approximation |\n|-----------|-------|---------------|\n| **Voltage Gain** $A_v$ | $\\dfrac{(g_m r_o+1)R_D}{R_D+r_o}$ | $+g_m R_D$ |\n| **Input Resistance** $R_{in}$ | $\\dfrac{R_D+r_o}{1+g_m r_o}$ | $\\dfrac{1}{g_m}$ |\n| **Output Resistance** $R_{out}$ | $R_D \\| r_o$ | $R_D \\| r_o$ |\n\n## Key Characteristics\n\n1. **Non-inverting** amplifier (positive gain, unlike common-source)\n2. **Low input impedance** (~1/gₘ): ideal for 50 Ω RF matching\n3. **No Miller effect**: gate capacitance is AC-grounded → excellent high-frequency performance\n4. **Widely used** in cascode stages and RF low-noise amplifiers",
        "format": "markdown",
        "sha256": "a22244b300e66207d699f25b85e81ec84187423036bd65cfbc20e1fc0a202eb1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the common-gate topology but overlooks that the source node is directly shorted to ground, so the input is shorted and the ideal gain is zero. Its nonzero common-gate gain therefore misses the circuit’s essential feature.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1567,
        "output_tokens": 22714,
        "total_tokens": 24281,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21792,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1567,
        "output_tokens": 22714,
        "total_tokens": 24281,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21792,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Gate NMOS Amplifier Analysis\n\n## Circuit Identification\n\nThis is a **common-gate amplifier** (M₁ is NMOS):\n| Terminal | Connection | AC Role |\n|----------|-----------|---------|\n| **Gate** | V_b (DC) | AC ground |\n| **Source** | V_in via C₁ | Input |\n| **Drain** | R_D → V_DD | Output (V_out) |\n\n---\n\n## DC Bias Analysis\n\nWith C₁ blocking DC and the source referenced to ground:\n\n$$V_{GS} = V_b, \\qquad I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_b - V_{TH})^2$$\n\n$$\\boxed{V_{out,DC} = V_{DD} - I_D R_D}$$\n\n**Saturation requirement:** $V_{DS} = V_{out,DC} > V_b - V_{TH}$\n\nSmall-signal parameters at the bias point:\n\n$$g_m = \\sqrt{2\\mu_n C_{ox}\\frac{W}{L}I_D}, \\qquad r_o = \\frac{|V_A|}{I_D}$$\n\n---\n\n## Small-Signal Analysis (Mid-Band)\n\nAt mid-band: **C₁ → short circuit**, **V_b → AC ground**\n\n**Key relationship:**\n$$v_{gs} = v_g - v_s = 0 - v_{in} = -v_{in}$$\n\n**KCL at the drain node** (V_DD is AC ground):\n\n$$\\frac{v_{out}}{R_D} + \\underbrace{g_m v_{gs}}_{-g_m v_{in}} + \\frac{v_{out} - v_{in}}{r_o} = 0$$\n\n$$v_{out}\\!\\left(\\frac{1}{R_D} + \\frac{1}{r_o}\\right) = v_{in}\\!\\left(g_m + \\frac{1}{r_o}\\right)$$\n\n---\n\n## Key Results\n\n### Voltage Gain\n$$\\boxed{A_v = \\frac{(1 + g_m r_o)\\,R_D}{R_D + r_o} \\approx g_m\\!\\left(R_D \\| r_o\\right) \\approx g_m R_D}$$\n\n> **Positive (non-inverting) gain** — the defining characteristic of common-gate.\n\n*Physical intuition:* When $v_{in}$ rises → $V_{GS}$ decreases → $I_D$ decreases → less drop across $R_D$ → $V_{out}$ rises. ✓\n\n### Input Resistance (looking into source)\n$$\\boxed{R_{in} = \\frac{R_D + r_o}{1 + g_m r_o} \\approx \\frac{1}{g_m} \\quad \\text{(low impedance)}}$$\n\n### Output Resistance (V_in killed, looking into drain)\n$$\\boxed{R_{out} = R_D \\| r_o}$$\n\n### Low-Frequency Pole (from C₁)\n$$f_L = \\frac{1}{2\\pi\\, C_1\\!\\left(\\dfrac{1}{g_m} + R_{src}\\right)}$$\n\n---\n\n## Performance Summary\n\n| Parameter | Exact | Approximate |\n|-----------|-------|-------------|\n| Gain $A_v$ | $\\dfrac{(1+g_m r_o)R_D}{R_D+r_o}$ | $g_m R_D$ **(non-inverting)** |\n| $R_{in}$ | $\\dfrac{R_D+r_o}{1+g_m r_o}$ | $\\dfrac{1}{g_m}$ (small) |\n| $R_{out}$ | $R_D \\| r_o$ | $\\approx R_D$ |\n\n**Advantages of common-gate topology:**\n1. **No Miller effect** (gate at AC ground → C_gd not multiplied → wide bandwidth)\n2. **Low input impedance** → ideal for 50 Ω impedance matching in RF circuits\n3. Commonly used as the **upper device in a cascode** stage",
        "format": "markdown",
        "sha256": "675c912487ba425155cb4afa8733b66603a025e835ae9364f67e4f651aeb5e8f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the common-gate topology but misses that the source node is directly shorted to ground, so it incorrectly assigns a nonzero common-gate gain.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1567,
        "output_tokens": 45499,
        "total_tokens": 47066,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 44432,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1567,
        "output_tokens": 45499,
        "total_tokens": 47066,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 44432,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Gate NMOS Amplifier Analysis\n\n## 1. Circuit Identification\n\nThis is a **Common-Gate NMOS Amplifier** with:\n- **Gate:** Biased at DC voltage $V_b$ → AC ground for signals\n- **Source:** Input terminal, with $V_{in}$ AC-coupled via $C_1$\n- **Drain:** Output terminal $V_{out}$\n- **Load:** Drain resistor $R_D$ between $V_{DD}$ and drain\n\n---\n\n## 2. DC Operating Point\n\nWith $C_1$ open-circuit (blocks DC) and $V_S = 0$:\n\n$$V_{GS} = V_b, \\qquad I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_b - V_{tn})^2$$\n\n$$\\boxed{V_{out,DC} = V_{DD} - I_D R_D}$$\n\n**Saturation condition:** $V_{DS} \\geq V_{GS} - V_{tn}$, i.e., $V_{DD} - I_D R_D \\geq V_b - V_{tn}$\n\n---\n\n## 3. Small-Signal Analysis\n\nAt signal frequencies, $C_1 \\to$ short circuit. Key relations:\n\n$$v_{gs} = v_g - v_s = 0 - v_{in} = -v_{in}$$\n\n**KCL at drain node (all currents leaving):**\n\n$$\\frac{v_{out}}{R_D} + \\frac{v_{out} - v_{in}}{r_o} + \\underbrace{g_m v_{gs}}_{= -g_m v_{in}} = 0$$\n\nSolving:\n\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m + 1/r_o}{1/R_D + 1/r_o} = \\underbrace{(g_m r_o + 1)\\frac{R_D}{R_D + r_o}}_{\\approx\\; g_m(R_D \\| r_o)}$$\n\n$$\\boxed{A_v \\approx g_m(R_D \\| r_o) \\approx g_m R_D \\quad \\text{(positive: non-inverting)}}$$\n\n### Input Resistance (looking into source)\n\n$$\\boxed{R_{in} = \\frac{1}{g_m + 1/r_o} \\approx \\frac{1}{g_m} \\quad \\text{(very low)}}$$\n\n### Output Resistance (looking into drain, $v_{in}=0$)\n\n$$\\boxed{R_{out} = R_D \\| r_o}$$\n\n---\n\n## 4. Performance Summary\n\n| Parameter | Expression | Character |\n|-----------|-----------|-----------|\n| Voltage Gain | $g_m(R_D\\|r_o)$ | **Positive (non-inverting)** |\n| Input Resistance | $\\approx 1/g_m$ | **Very low** (~100–500 Ω) |\n| Output Resistance | $R_D\\|r_o$ | Moderate |\n| Phase Shift | 0° | Non-inverting |\n\n---\n\n## 5. Key Characteristics\n\n1. **Non-inverting gain:** $\\uparrow V_{in}$ raises $V_S$ → decreases $V_{GS}$ → decreases $I_D$ → decreases drop across $R_D$ → $\\uparrow V_{out}$\n\n2. **No Miller effect:** Gate is at AC ground, so $C_{gd}$ is *not* multiplied → excellent high-frequency bandwidth\n\n3. **Current buffering:** $I_{source} \\approx I_{drain}$ (unity current gain)\n\n4. **Applications:** RF/wideband amplifiers, cascode stages, impedance matching ($R_{in} \\to R_{out}$ transformation)",
        "format": "markdown",
        "sha256": "d7adffced71e8c9262e2af2605a2de9677afde311cd7f8f42a36d310f07ca71e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Identifies the common-gate topology, but misses that the source node is directly shorted to ground and incorrectly derives a nonzero gain as if the short were absent.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1567,
        "output_tokens": 35120,
        "total_tokens": 36687,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1567,
        "output_tokens": 35120,
        "total_tokens": 36687,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Counting Poles in the Common-Source Amplifier\n\n## Identifying the Active Capacitors\n\nThe circuit contains four parasitic capacitors: $C_{GS}$, $C_{GD}$, $C_{DB}$, and $C_{SB}$.\n\nSince the source of $M_1$ is **directly connected to ground** (common-source configuration):\n- $C_{SB}$ connects from ground to ground → **shorted, contributes no pole**\n\n**Active capacitors: $C_{GS}$, $C_{GD}$, $C_{DB}$** (3 capacitors)\n\n## Checking for Capacitive Loops\n\nThese three capacitors connect nodes **Gate**, **Drain**, and **Ground** pairwise, forming a **triangular capacitive loop**:\n\n$$\\text{Gate} \\xrightarrow{C_{GD}} \\text{Drain} \\xrightarrow{C_{DB}} \\text{Ground} \\xrightarrow{C_{GS}} \\text{Gate}$$\n\nBy KVL around this all-capacitor loop:\n$$V_{C_{GS}} = V_{C_{GD}} + V_{C_{DB}}$$\n\nThis constraint means **only 2 of the 3 capacitor voltages are independent**.\n\n## Transfer Function Verification\n\nApplying KCL at the Gate ($V_G$) and Drain ($V_D$) nodes yields:\n\n$$\\Delta(s) = \\frac{1}{R_S R_D} + s\\!\\left[\\frac{C_{DB}+C_{GD}}{R_S} + \\frac{C_{GS}+C_{GD}}{R_D} + g_m C_{GD}\\right] + s^2\\underbrace{\\left[C_{GS}(C_{DB}+C_{GD}) + C_{GD}C_{DB}\\right]}_{\\neq\\, 0}$$\n\nThe denominator is a **2nd-degree polynomial** in $s$, confirming **2 poles**.\n\n## Summary\n\n| Capacitor | Status | Contributes? |\n|-----------|--------|-------------|\n| $C_{SB}$ | Shorted (source at ground) | No |\n| $C_{GS}$, $C_{GD}$, $C_{DB}$ | Form 1 capacitive loop → $3-1=2$ independent | Yes |\n\n$$\\boxed{2 \\text{ poles}}$$",
        "format": "markdown",
        "sha256": "677454baa30c312cc4a15990b34de3b8398c86566a0b8444b311efcda81f1856"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that CSB is shorted to ground and that the remaining three capacitors form a loop with only two independent voltages. The second-order denominator also confirms two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1570,
        "output_tokens": 33919,
        "total_tokens": 35489,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1570,
        "output_tokens": 33919,
        "total_tokens": 35489,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the Poles\n\n### Step 1: Identify All Capacitors\n\nThe circuit contains four parasitic capacitances:\n- $C_{GS}$: Gate-to-Source\n- $C_{GD}$: Gate-to-Drain  \n- $C_{DB}$: Drain-to-Bulk\n- $C_{SB}$: Source-to-Bulk\n\n### Step 2: Eliminate Shorted Capacitors\n\nThe source of $M_1$ is **directly connected to ground**, and the bulk (body) is also at ground. Therefore:\n\n$$C_{SB}: \\text{Ground} \\leftrightarrow \\text{Ground} \\quad \\Rightarrow \\quad \\text{shorted, contributes \\textbf{no poles}}$$\n\n### Step 3: Check for Capacitor Loops\n\nThe remaining capacitors — $C_{GS}$, $C_{GD}$, $C_{DB}$ — connect between three nodes: **Gate**, **Drain**, and **Ground**. This forms a **delta (triangle) topology**:\n\n$$\\text{Gate} \\xrightarrow{C_{GD}} \\text{Drain} \\xrightarrow{C_{DB}} \\text{Ground} \\xrightarrow{C_{GS}} \\text{Gate}$$\n\nThis is **one all-capacitor loop**, which applies a KVL constraint:\n$$V_{GS} = V_{GD} + V_{DB}$$\n\nEach all-capacitor loop reduces the number of independent energy storage elements by 1:\n\n$$\\text{Independent capacitors} = 3 - 1 = 2$$\n\n### Step 4: Verify via Transfer Function\n\nWriting KCL at the two non-ground nodes (Gate: $V_G$, Drain: $V_D$) and solving yields:\n\n$$\\frac{V_{out}}{V_{in}} = \\frac{sC_{GD} - g_m}{\\underbrace{R_S\\!\\left[\\frac{1}{R_SR_D} + s\\!\\left(\\frac{C_{GS}+C_{GD}}{R_D}+\\frac{C_{DB}+C_{GD}}{R_S}+g_mC_{GD}\\right) + s^2 R_D(C_{GS}C_{DB}+C_{GD}(C_{GS}+C_{DB}))\\right]}_{\\text{2nd-order polynomial}}}$$\n\nThe denominator is a **degree-2 polynomial** in $s$.\n\n### Result\n\n| Capacitor | Contribution |\n|-----------|-------------|\n| $C_{SB}$ | 0 (shorted) |\n| $C_{GS}$, $C_{GD}$, $C_{DB}$ | 2 (loop reduces 3→2) |\n\n$$\\boxed{2 \\text{ poles}}$$\n\nThe two poles correspond to the **input RC network** (dominated by $R_S$ and $C_{GS}$ + Miller capacitance) and the **output RC network** (dominated by $R_D$ and $C_{DB}$ + Miller capacitance).",
        "format": "markdown",
        "sha256": "1448990f1865b9a5ad71d3909ea0a41d996079b11d45e06b6fd0b667f3d24715"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes there are two poles and justifies the count by noting that C_SB is shorted and the remaining capacitors form a loop with only two independent capacitor voltages, satisfying the full-credit rule.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1570,
        "output_tokens": 19926,
        "total_tokens": 21496,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19157,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1570,
        "output_tokens": 19926,
        "total_tokens": 21496,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19157,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the Poles of the Common-Source Amplifier\n\n### Setting Up the Small-Signal Model\n\nThe circuit is a common-source MOSFET amplifier with parasitic capacitances. In the AC small-signal model:\n\n| Capacitor | Location | Active? |\n|-----------|----------|---------|\n| $C_{GS}$ | Gate → Ground | ✅ Yes |\n| $C_{GD}$ | Gate → Drain | ✅ Yes |\n| $C_{DB}$ | Drain → Ground | ✅ Yes |\n| $C_{SB}$ | Source → Bulk | ❌ No (source = bulk = AC ground → shorted) |\n\n### Counting Independent Nodes\n\nThe small-signal circuit has **two non-ground nodes**:\n1. **Gate node** ($V_G$): driven through $R_S$, with $C_{GS}$ to ground and $C_{GD}$ to drain\n2. **Drain node** ($V_D$): loaded by $R_D$, with $C_{DB}$ to ground and $C_{GD}$ to gate\n\n### Checking for Capacitor Loops\n\nThe three active capacitors form **one loop**:\n\n$$\\text{Ground} \\xrightarrow{C_{GS}} \\text{Gate} \\xrightarrow{C_{GD}} \\text{Drain} \\xrightarrow{C_{DB}} \\text{Ground}$$\n\nUsing the formula:\n$$\\text{Independent capacitors} = \\underbrace{3}_{\\text{total caps}} - \\underbrace{1}_{\\text{loop}} = 2$$\n\n### Verification via Transfer Function\n\nWriting KCL at both nodes and solving yields:\n\n$$\\frac{V_{out}}{V_{in}}(s) = \\frac{-g_m R_D\\!\\left(1 - \\dfrac{sC_{GD}}{g_m}\\right)}{1 + s\\bigl[R_S(C_{GS}+C_{GD}(1+g_m R_D))+R_D(C_{DB}+C_{GD})\\bigr] + s^2 R_S R_D\\bigl(C_{GS}C_{GD}+C_{GS}C_{DB}+C_{GD}C_{DB}\\bigr)}$$\n\nThe denominator is a **2nd-order polynomial** in $s$.\n\n### Result\n\n$$\\boxed{2 \\text{ poles}}$$",
        "format": "markdown",
        "sha256": "54e1358c6081d1ee75557dace82c280a8726f9dc3766711746062b8dc073dd29"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that C_SB is shorted out, explains why the other three capacitors provide only two independent capacitor voltages, and confirms a second-order denominator.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1570,
        "output_tokens": 7605,
        "total_tokens": 9175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1570,
        "output_tokens": 7605,
        "total_tokens": 9175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the MOSFET Feedback Amplifier\n\n## Circuit Identification\n\n**M₁ (enhancement NMOS)** is configured as a **common-source amplifier** with a **drain-to-gate self-biasing feedback network**.\n\n| Component | Function |\n|-----------|----------|\n| $R_D$ | Drain load resistor |\n| $R_1$ | Feedback resistor (Vout → gate) |\n| $R_2$ | Gate bias to ground |\n| $V_F$ | Feedback voltage at gate: $V_F = V_{out}\\cdot\\dfrac{R_2}{R_1+R_2}$ |\n\n---\n\n## DC Operating Point Analysis\n\nSince the gate draws no current, $R_1$–$R_2$ acts as a voltage divider:\n\n$$\\boxed{V_{GS} = V_F = V_{out}\\cdot\\frac{R_2}{R_1+R_2}}$$\n\nAssuming saturation ($V_{DS} \\ge V_{GS}-V_{tn}$):\n\n$$I_D = \\frac{K_n}{2}(V_{GS} - V_{tn})^2, \\qquad V_{out} = V_{DD} - I_D R_D$$\n\nSubstituting and solving the resulting quadratic determines the **Q-point** $(I_{DQ},\\, V_{GSQ},\\, V_{out,Q})$.\n\n> **Note:** The feedback constraint $V_{DS} \\ge V_{GS} - V_{tn}$ is automatically satisfied, so **M₁ remains in saturation** whenever it is ON.\n\n---\n\n## Small-Signal (AC) Analysis\n\nApplying KCL at the drain node with $v_g = v_{in}$ (ideal source):\n\n$$\\frac{v_{out}}{R_D} + \\left(g_m v_{in} + \\frac{v_{out}}{r_{ds}}\\right) + \\frac{v_{out}-v_{in}}{R_1} = 0$$\n\n### Voltage Gain\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_m(R_D \\| r_{ds} \\| R_1) \\approx -g_m R_D}$$\n\n### Input Resistance (Miller Effect on $R_1$)\n\n$$\\boxed{R_{in} = R_2 \\,\\Big\\|\\, \\frac{R_1}{1+g_m R_D}}$$\n\nFor large $g_m R_D$: $R_{in} \\approx R_1/(g_m R_D)$ — significantly reduced by the Miller effect.\n\n### Output Resistance\n\n(with $v_{in} = 0$, gate is at AC ground)\n\n$$\\boxed{R_{out} = R_D \\| r_{ds} \\| R_1 \\approx R_D}$$\n\n---\n\n## Feedback Analysis\n\n| Parameter | Expression |\n|-----------|-----------|\n| Open-loop gain | $A \\approx -g_m R_D$ |\n| Feedback factor | $\\beta = \\dfrac{R_2}{R_1+R_2}$ |\n| Loop gain | $T = g_m R_D \\cdot \\dfrac{R_2}{R_1+R_2}$ |\n\nFor high loop gain ($T \\gg 1$):\n\n$$\\boxed{A_{v,\\text{CL}} \\approx -\\frac{1}{\\beta} = -\\frac{R_1+R_2}{R_2} = -\\!\\left(1 + \\frac{R_1}{R_2}\\right)}$$\n\n### Benefits of Negative Feedback\n- **Stabilizes the DC operating point** against $K_n$ and temperature variations\n- **Desensitizes** closed-loop gain from $g_m$\n- **Lowers** input and output impedances by factor $(1+T)$\n- **Extends** the -3 dB bandwidth by factor $(1+T)$",
        "format": "markdown",
        "sha256": "e0e07284c6da5012f1211f8f58907b32f31adb952db7f5e04b4a0570dd4626b8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It recognizes the output-to-gate divider and negative feedback, but incorrectly treats the circuit as common-source with the input at the gate rather than at the source. This leads to an incorrect inverting closed-loop gain; the golden solution assigns 3 for this kind of topology/gain error.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1567,
        "output_tokens": 46560,
        "total_tokens": 48127,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 45568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1567,
        "output_tokens": 46560,
        "total_tokens": 48127,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 45568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the MOSFET Feedback Amplifier\n\n## Circuit Identification\n\nThe circuit is a **series-shunt (voltage–voltage) negative feedback amplifier** composed of:\n- **M₁** (NMOS): amplifying device\n- **R_D**: drain load from V_DD\n- **R₁, R₂**: feedback voltage divider (output → gate of M₁)\n- **V_F** = V_out · R₂/(R₁+R₂): feedback signal applied to the gate\n- **V_in**: input applied to the **source** of M₁\n\n---\n\n## Feedback Type\n\n| Property | Description |\n|---|---|\n| **Comparison** | Series: V_GS = V_F − V_in (gate vs. source voltage subtraction) |\n| **Sampling** | Shunt: R₁–R₂ divider taps V_out in parallel |\n| **Sign** | **Negative** — increase V_in → V_out↑ → V_F↑ → V_GS↓ → corrective action |\n\n---\n\n## DC Analysis\n\nFor M₁ in saturation (V_DS ≥ V_GS − V_TN):\n\n$$V_F = V_{out}\\cdot\\frac{R_2}{R_1+R_2}, \\qquad V_{GS} = V_F - V_{in}$$\n\n$$I_D = \\frac{K_N}{2}(V_{GS}-V_{TN})^2, \\quad K_N = \\mu_n C_{ox}\\frac{W}{L}$$\n\n$$\\boxed{V_{out} = V_{DD} - I_D R_D}$$\n\n---\n\n## Small-Signal Analysis\n\nDefine β = R₂/(R₁+R₂) and R_L = R_D ‖ (R₁+R₂).\n\nThe small-signal gate–source voltage:\n$$v_{gs} = v_F - v_{in} = \\beta\\, v_{out} - v_{in}$$\n\n**KCL at drain node** (currents leaving = 0):\n$$\\frac{v_{out}}{R_D} + \\frac{v_{out}}{R_1+R_2} + g_m\\underbrace{(\\beta\\,v_{out}-v_{in})}_{v_{gs}} = 0$$\n\nSolving for the **closed-loop voltage gain**:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_L}{1 + g_m \\beta R_L}}$$\n\nFor large loop gain $T = g_m\\beta R_L \\gg 1$:\n\n$$\\boxed{A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}}$$\n\n---\n\n## Closed-Loop Impedances\n\n**Output resistance** (shunt feedback → R_out decreases):\n$$R_{out} = \\frac{R_L}{1+T} \\xrightarrow{T\\gg1} \\frac{1}{g_m\\beta}$$\n\n**Input resistance** (series feedback → R_in increases):\n$$R_{in} = \\frac{1+T}{g_m} \\xrightarrow{T\\gg1} \\frac{T}{g_m} = \\beta R_L$$\n\n---\n\n## Feedback Parameter Summary\n\n| Parameter | Expression |\n|---|---|\n| Open-loop gain | $A = g_m(R_D\\|(R_1+R_2))$ |\n| Feedback factor | $\\beta = R_2/(R_1+R_2)$ |\n| Loop gain | $T = g_m\\,\\beta\\,(R_D\\|(R_1+R_2))$ |\n| Closed-loop gain | $1 + R_1/R_2$ |\n\n---\n\n## Key Conclusions\n\n> This circuit is the **MOSFET analog of the op-amp non-inverting amplifier**:\n> - M₁ acts as the \"op-amp\" (gate = inverting input, source = non-inverting input)\n> - R₁–R₂ is the feedback network\n> - The closed-loop gain **1 + R₁/R₂ depends only on passive resistors**, not on g_m\n> - Feedback **reduces output impedance** and **increases input impedance** by factor (1+T)",
        "format": "markdown",
        "sha256": "b69c3483ce8b968d705146f66071126061a0cc958f853f200e3df237b45a47dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain. The optional impedance discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1567,
        "output_tokens": 27885,
        "total_tokens": 29452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26781,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1567,
        "output_tokens": 27885,
        "total_tokens": 29452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26781,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# MOSFET Feedback Amplifier Analysis\n\n## 1. Circuit Topology\n\nThe circuit is an **NMOS series-shunt (non-inverting) feedback amplifier**:\n\n| Terminal | Connection |\n|----------|-----------|\n| Drain (D) | → R_D → V_DD (also = V_out) |\n| Gate (G) | Feedback voltage V_F |\n| Source (S) | Input voltage V_in |\n\nThe R₁–R₂ divider samples the output and returns a fraction to the gate:\n$$V_F = V_{out}\\cdot\\frac{R_2}{R_1+R_2} = \\beta\\, V_{out}, \\qquad \\beta = \\frac{R_2}{R_1+R_2}$$\n\nThe effective gate–source voltage is therefore:\n$$V_{GS} = V_F - V_{in}$$\n\n## 2. Negative Feedback Confirmation\n\nTracing the feedback loop:\n\n$$V_{in}\\uparrow \\;\\Rightarrow\\; V_{GS}\\downarrow \\;\\Rightarrow\\; I_D\\downarrow \\;\\Rightarrow\\; V_{out} = V_{DD}-I_D R_D\\uparrow \\;\\Rightarrow\\; V_F\\uparrow \\;\\Rightarrow\\; \\text{(restores }V_{GS}\\text{)}$$\n\nThis is **stable negative feedback** ✓\n\n## 3. DC (Bias) Analysis\n\nAssuming M₁ is in saturation, the Q-point is set by three simultaneous equations:\n\n$$V_{GS,Q} = \\beta\\,V_{out,Q} - V_{in,DC}$$\n$$V_{out,Q} = V_{DD} - I_{D,Q}\\,R_D$$\n$$I_{D,Q} = \\frac{K_n}{2}\\!\\left(V_{GS,Q}-V_{th}\\right)^2$$\n\n## 4. Small-Signal (AC) Analysis\n\nUsing the MOSFET small-signal model (transconductance $g_m$, neglecting $r_o$):\n\n$$v_{gs} = \\beta\\,v_{out} - v_{in}$$\n\n**KCL at the drain node:**\n$$\\frac{v_{out}}{R_D} + g_m v_{gs} = 0 \\implies \\frac{v_{out}}{R_D} + g_m(\\beta\\,v_{out} - v_{in}) = 0$$\n\nSolving:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_D}{1 + g_m R_D \\cdot \\dfrac{R_2}{R_1+R_2}}}$$\n\nFor large loop gain ($T = g_m R_D\\beta \\gg 1$):\n\n$$A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}$$\n\n## 5. Summary of Key Parameters\n\n| Quantity | Expression | High Loop-Gain Limit |\n|----------|-----------|---------------------|\n| Loop gain | $T = g_m R_D\\,\\beta$ | $T \\gg 1$ |\n| Closed-loop gain | $A_v = \\dfrac{g_m R_D}{1+T}$ | $1 + R_1/R_2$ |\n| Input resistance | $R_{in} = \\dfrac{1+T}{g_m}$ | $\\beta R_D$ (high) |\n| Output resistance | $R_{out} = \\dfrac{R_D}{1+T}$ | $\\dfrac{1}{g_m\\beta}$ (low) |\n\n## 6. Key Conclusions\n\n1. **Non-inverting gain** precisely set by $R_1$ and $R_2$ (independent of $g_m$ for $T\\gg 1$)\n2. **High input impedance** – avoids loading the signal source\n3. **Low output impedance** – capable of driving loads\n4. **Bias stability** – the feedback loop corrects operating-point drift\n5. **Analogy**: This is the MOSFET equivalent of the **op-amp non-inverting amplifier**",
        "format": "markdown",
        "sha256": "5c9751ccb5ac13006003f04dc7e05d9467c7ac25c0a55858b38e6717db0146f1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven input, output-divider feedback to the gate, and negative feedback, with the correct non-inverting closed-loop gain behavior. The RD-only gain expression is an acceptable loading approximation; the extra bias and resistance details are not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1567,
        "output_tokens": 43533,
        "total_tokens": 45100,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42475,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1567,
        "output_tokens": 43533,
        "total_tokens": 45100,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42475,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Source Follower (Common-Drain Amplifier) Analysis\n\n## Circuit Identification\n\nThis is an **NMOS Source Follower** with a current-source load:\n| Transistor | Configuration | Role |\n|-----------|--------------|------|\n| M₁ (NMOS) | Gate→V_in, Drain→V_DD, Source→V_out | Source follower |\n| M₂ (NMOS) | Gate→V_b, Drain→V_out, Source→GND | Bias current source |\n\n---\n\n## DC Analysis\n\n**M₂** establishes the bias current (in saturation):\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2 = I_B$$\n\n**M₁** produces a level-shifted output:\n$$\\boxed{V_{out} = V_{in} - V_{GS1} = V_{in} - V_{TH1} - \\sqrt{\\frac{2I_B}{\\mu_n C_{ox}(W/L)_1}}}$$\n\n**Saturation conditions:**\n- M₁: $V_{DD} \\geq V_{in} - V_{TH1}$ (nearly always satisfied)  \n- M₂: $V_{out} \\geq V_b - V_{TH2}$ (sets minimum output swing)\n\n---\n\n## Small-Signal Analysis\n\n> Setting V_DD → AC ground, V_b → AC ground. M₂ reduces to **r_o2** alone (v_gs2 = v_bs2 = 0).\n\n**KCL at V_out** (accounting for body effect of M₁, where $v_{bs1} = -v_{out}$):\n\n$$g_{m1}(v_{in}-v_{out}) \\underbrace{- g_{mb1}\\,v_{out}}_{\\text{body effect}} - \\frac{v_{out}}{r_{o1}} - \\frac{v_{out}}{r_{o2}} = 0$$\n\n### Voltage Gain\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}}{g_{m1}+g_{mb1}+\\dfrac{1}{r_{o1}}+\\dfrac{1}{r_{o2}}} = \\frac{g_{m1}(r_{o1}\\|r_{o2})}{1+(g_{m1}+g_{mb1})(r_{o1}\\|r_{o2})} < 1}$$\n\n### Output Resistance\nSetting $v_{in} = 0$ and injecting test voltage $v_x$:\n\n$$\\boxed{R_{out} = \\frac{1}{g_{m1}+g_{mb1}+\\dfrac{1}{r_{o1}}+\\dfrac{1}{r_{o2}}} = \\frac{1}{g_{m1}+g_{mb1}}\\bigg\\|r_{o1}\\bigg\\|r_{o2}}$$\n\n### Input Resistance\n$$R_{in} = \\infty \\quad \\text{(MOSFET gate)}$$\n\n---\n\n## Simplified Results (r_o → ∞)\n\n| Parameter | Expression | Typical Value |\n|-----------|-----------|--------------|\n| Voltage Gain | $A_v \\approx \\dfrac{g_{m1}}{g_{m1}+g_{mb1}} = \\dfrac{1}{1+\\eta}$ | 0.7 – 0.9 |\n| Output Resistance | $R_{out} \\approx \\dfrac{1}{g_{m1}+g_{mb1}} \\approx \\dfrac{1}{g_{m1}}$ | ~100–500 Ω |\n| Phase shift | 0° | (non-inverting) |\n\nwhere $\\eta = g_{mb1}/g_{m1} \\approx 0.1$–$0.2$.\n\n---\n\n## Key Takeaways\n\n- **Near-unity, non-inverting gain** — acts as a voltage buffer\n- **Very high input impedance** — does not load the preceding stage  \n- **Low output impedance (~1/g_m)** — can drive low-impedance loads\n- The current source M₂ provides high impedance, pushing $A_v$ closer to 1 versus a resistive load\n- The body effect is the primary limitation preventing exactly unity gain",
        "format": "markdown",
        "sha256": "2cedf0199b87a46d5fd9e4318984d6032a6c15fe4a2e4c9c20445479c97b46bb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and current-source load, and gives the positive, sub-unity gain with appropriate body-effect and output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 13709,
        "total_tokens": 14999,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12606,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 13709,
        "total_tokens": 14999,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12606,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Source Follower with Current-Source Load\n\n## Circuit Identification\n\n| Transistor | Type | Configuration | Role |\n|-----------|------|---------------|------|\n| M₁ | NMOS | Common-Drain (Source Follower) | Input stage |\n| M₂ | NMOS | Common-Gate (AC) | Current-source load |\n\n**M₁:** Drain → V_DD, Gate → V_in, Source → V_out  \n**M₂:** Drain → V_out, Gate → V_b (DC bias), Source → GND\n\n---\n\n## DC Operating Point\n\n$$V_{out} = V_{in} - V_{GS1}$$\n\nThe quiescent current is set by the bias voltage $V_b$:\n$$I_{D1} = I_{D2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_b - V_{tn})^2$$\n\n---\n\n## Small-Signal Analysis\n\n**KCL at the output node** (with $v_{gs2} = 0$ since $V_b$ is AC ground):\n\n$$\\underbrace{g_{m1}(v_{in}-v_{out}) - \\frac{v_{out}}{r_{o1}}}_{\\text{current from }M_1} = \\underbrace{\\frac{v_{out}}{r_{o2}}}_{\\text{current into }M_2}$$\n\nSolving for the voltage gain:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}(r_{o1}\\|r_{o2})}{1 + g_{m1}(r_{o1}\\|r_{o2})} < 1}$$\n\nSince typically $g_{m1}(r_{o1}\\|r_{o2}) \\gg 1$:\n\n$$A_v \\approx 1$$\n\n**Output Resistance** (set $v_{in} = 0$, inject $v_x$):\n\n$$\\boxed{R_{out} = \\frac{1}{g_{m1} + \\dfrac{1}{r_{o1}} + \\dfrac{1}{r_{o2}}} = \\frac{1}{g_{m1}}\\,\\bigg\\|\\, r_{o1} \\,\\bigg\\|\\, r_{o2} \\approx \\frac{1}{g_{m1}}}$$\n\n---\n\n## Summary of Key Properties\n\n| Parameter | Expression | Typical Value |\n|-----------|-----------|---------------|\n| Voltage Gain $A_v$ | $\\dfrac{g_{m1}(r_{o1}\\|r_{o2})}{1+g_{m1}(r_{o1}\\|r_{o2})}$ | $\\lesssim 1$ (no inversion) |\n| Output Resistance $R_{out}$ | $\\dfrac{1}{g_{m1}}\\|r_{o1}\\|r_{o2}$ | Low (~$\\frac{1}{g_m}$) |\n| Input Resistance $R_{in}$ | $\\infty$ | Very high |\n\n> **Function:** This circuit acts as a **voltage buffer** — it tracks the input with near-unity gain, provides a **low output impedance** (~1/g_m1), and an essentially **infinite input impedance**, making it ideal for impedance transformation and driving low-impedance loads.",
        "format": "markdown",
        "sha256": "1be428aef4990c6146b39fba39a1bb31e12960def121db458b13fad2db4b58e5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as the current-source load, and gives a positive gain below but near unity. The omitted body-effect term is an acceptable idealization under the full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 9788,
        "total_tokens": 11078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8945,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 9788,
        "total_tokens": 11078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8945,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Source Follower (Common-Drain Amplifier) Analysis\n\n## Circuit Identification\n\n| Transistor | Type | Configuration |\n|-----------|------|---------------|\n| M₁ | NMOS | **Source Follower** (Drain → V_DD, Gate → V_in, Source → V_out) |\n| M₂ | NMOS | **Current Source** (Gate → V_b, Drain → V_out, Source → GND) |\n\n---\n\n## DC Analysis\n\nM₂ establishes the bias current (M₂ in saturation):\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W_2}{L_2}(V_b - V_{tn})^2$$\n\nSince $I_{D1} = I_{D2}$ (KCL), the DC output voltage is:\n$$\\boxed{V_{out} = V_{in} - V_{GS1} = V_{in} - V_{tn} - \\sqrt{\\frac{2I_D}{\\mu_n C_{ox}(W_1/L_1)}}}$$\n\nThe output **tracks** the input with a fixed offset V_GS1.\n\n**Saturation conditions:**\n- M₁: $V_{in} \\leq V_{DD} + V_{tn}$ *(automatically satisfied)*\n- M₂: $V_{out} \\geq V_b - V_{tn}$ *(minimum output swing)*\n\n---\n\n## Small-Signal Analysis\n\nThe small-signal model gives $v_{gs1} = v_{in} - v_{out}$ and $v_{gs2} = 0$.\n\n**KCL at V_out:**\n$$g_{m1}(v_{in} - v_{out}) = \\frac{v_{out}}{r_{o1}} + \\frac{v_{out}}{r_{o2}}$$\n\n### Voltage Gain\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}(r_{o1}\\|r_{o2})}{1 + g_{m1}(r_{o1}\\|r_{o2})} \\approx 1}$$\n\n> Positive, non-inverting, and slightly less than unity.\n\n### Output Resistance\nSetting $v_{in} = 0$ and applying a test voltage $v_x$:\n\n$$\\boxed{R_{out} = \\frac{1}{g_{m1}}\\,\\|\\, r_{o1}\\,\\|\\,r_{o2} \\approx \\frac{1}{g_{m1}} \\quad \\text{(low)}}$$\n\n### Input Resistance\n$$R_{in} \\to \\infty \\quad \\text{(MOSFET gate)}$$\n\n---\n\n## Including Body Effect (M₁ source ≠ bulk)\n\nSince $v_{bs1} = -v_{out}$, the body-effect transconductance $g_{mb1}$ modifies the results:\n\n$$A_v = \\frac{g_{m1}(r_{o1}\\|r_{o2})}{1+(g_{m1}+g_{mb1})(r_{o1}\\|r_{o2})}, \\qquad R_{out} = \\frac{1}{g_{m1}+g_{mb1}}\\,\\|\\,r_{o1}\\,\\|\\,r_{o2}$$\n\n---\n\n## Summary\n\n| Parameter | Expression | Limit |\n|-----------|-----------|-------|\n| Voltage Gain $A_v$ | $\\dfrac{g_{m1}(r_{o1}\\|r_{o2})}{1+g_{m1}(r_{o1}\\|r_{o2})}$ | $< 1$ (approaches 1) |\n| Output Resistance $R_{out}$ | $\\dfrac{1}{g_{m1}}\\|r_{o1}\\|r_{o2}$ | Low $\\approx 1/g_{m1}$ |\n| Input Resistance $R_{in}$ | $\\infty$ | — |\n\nThis circuit functions as a **high-input-impedance, low-output-impedance voltage buffer**, ideal for driving low-impedance loads without signal attenuation.",
        "format": "markdown",
        "sha256": "a0e5d1f28244578e3901134d70d10fbc864a9ab9e747991e9ef12def330ad90f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, with positive gain slightly below unity. The gain and output-resistance expressions, including the body-effect refinement, match the golden solution.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 28683,
        "total_tokens": 29973,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27648,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 28683,
        "total_tokens": 29973,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27648,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# CMOS Inverter Circuit Analysis\n\n## Circuit Identification\n\nThe circuit is a **CMOS Inverter** with:\n- **M₁ (NMOS):** Source → GND, Gate → V_in, Drain → V_out\n- **M₂ (PMOS):** Source → V_DD, Gate → V_in, Drain → V_out\n\nBoth gates are driven by V_in; both drains are tied to V_out.\n\n---\n\n## DC Operating Regions\n\n| Input | M₁ (NMOS) | M₂ (PMOS) | Output |\n|-------|-----------|-----------|--------|\n| V_in = 0 | V_GS1 = 0 < V_TN → **OFF** | V_SG2 = V_DD > \\|V_TP\\| → **ON** | V_out = **V_DD** |\n| V_in = V_DD | V_GS1 = V_DD > V_TN → **ON** | V_SG2 = 0 < \\|V_TP\\| → **OFF** | V_out = **0 V** |\n\n> **Logic function:** V_out = NOT(V_in) — a digital inverter\n\n---\n\n## Voltage Transfer Characteristic (VTC)\n\nFive distinct operating regions exist:\n\n$$\\underbrace{V_{OH} = V_{DD}}_{\\text{output HIGH}} \\quad \\longrightarrow \\underbrace{\\text{steep transition near } V_{th} \\approx \\frac{V_{DD}}{2}}_{\\text{both in saturation}} \\longrightarrow \\quad \\underbrace{V_{OL} = 0}_{\\text{output LOW}}$$\n\n---\n\n## Small-Signal Analysis (Both in Saturation)\n\nApplying **KCL at the output node** using the standard MOSFET small-signal model:\n\n$$\\underbrace{g_{m1} v_{in} + \\frac{v_{out}}{r_{o1}}}_{\\text{M}_1\\text{ contributes}} + \\underbrace{g_{m2} v_{in} + \\frac{v_{out}}{r_{o2}}}_{\\text{M}_2\\text{ contributes}} = 0$$\n\nSolving for the **voltage gain**:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -(g_{m1}+g_{m2})(r_{o1}\\|r_{o2})}$$\n\n| Parameter | Value |\n|-----------|-------|\n| Voltage Gain | $A_v = -(g_{m1}+g_{m2})(r_{o1}\\|r_{o2})$ |\n| Input Resistance | $R_{in} \\to \\infty$ |\n| Output Resistance | $R_{out} = r_{o1}\\|r_{o2}$ |\n\n---\n\n## Power Dissipation\n\n| Mode | Power |\n|------|-------|\n| **Static** | $P_{static} \\approx 0$ — one transistor is always OFF, blocking DC current |\n| **Dynamic** | $P_{dyn} = \\alpha C_L V_{DD}^2 f$ — from charging/discharging load capacitance |\n\n---\n\n## Key Takeaways\n\n1. **Complementary switching** — each transistor acts as the other's active load\n2. **Full rail-to-rail swing** — $V_{OL} = 0$, $V_{OH} = V_{DD}$ with no static resistors\n3. **Near-zero static power** — fundamental advantage of CMOS technology\n4. **High gain** in the transition region — enables use as an analog amplifier\n5. **High noise margins**: $NM_H \\approx NM_L \\approx V_{DD}/2$",
        "format": "markdown",
        "sha256": "71dc8500b6515c79919cc88690c12d4b8702ffeddf81611c57e90a9bf832e07a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and describes its inverting operation. The golden solution’s full-credit rule applies; optional analysis does not lower the score.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 17920,
        "total_tokens": 18239,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 17920,
        "total_tokens": 18239,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# CMOS Inverter Analysis\n\n## Circuit Identification\n\nThe circuit is a **CMOS Inverter** (NOT gate):\n- **M₁** (NMOS): Gate → Vᵢₙ, Source → GND, Drain → V_out\n- **M₂** (PMOS): Gate → Vᵢₙ, Source → V_DD, Drain → V_out\n\n---\n\n## DC Operation\n\n| Vᵢₙ | M₁ State | M₂ State | V_out |\n|-----|----------|----------|-------|\n| 0 (LOW): V_GS1 = 0 < V_TN | **OFF** | **ON** (triode) | V_DD (HIGH) |\n| V_DD (HIGH): V_SG2 = 0 < \\|V_TP\\| | **ON** (triode) | **OFF** | 0 (LOW) |\n\n✦ Zero static power dissipation — one transistor is **always OFF**.\n\n---\n\n## Voltage Transfer Characteristic (VTC)\n\nFive distinct regions exist as Vᵢₙ sweeps 0 → V_DD:\n\n$$\\boxed{\\text{I: }M_1\\text{ OFF, }M_2\\text{ triode}} \\rightarrow \\text{II: }M_1\\text{ sat, }M_2\\text{ triode} \\rightarrow \\text{III: Both sat} \\rightarrow \\text{IV: }M_1\\text{ triode, }M_2\\text{ sat} \\rightarrow \\text{V: }M_1\\text{ triode, }M_2\\text{ OFF}}$$\n\n**Switching Threshold V_M** (Region III, equating saturation currents):\n\n$$\\frac{k_n}{2}(V_M - V_{TN})^2 = \\frac{k_p}{2}(V_{DD} - V_M - |V_{TP}|)^2$$\n\n$$\\boxed{V_M = \\frac{\\sqrt{k_p}\\,(V_{DD}-|V_{TP}|) + \\sqrt{k_n}\\,V_{TN}}{\\sqrt{k_n}+\\sqrt{k_p}}}$$\n\nFor symmetric design ($k_n = k_p$, $V_{TN} = |V_{TP}|$): $V_M = V_{DD}/2$\n\n---\n\n## Small-Signal Analysis (Both Transistors in Saturation)\n\nApplying KCL at the output node $v_{out}$:\n\n$$(g_{m1} + g_{m2})\\,v_{in} + v_{out}\\!\\left(\\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}\\right) = 0$$\n\n| Parameter | Expression |\n|-----------|------------|\n| **Voltage Gain** | $A_v = \\dfrac{v_{out}}{v_{in}} = -(g_{m1}+g_{m2})(r_{o1}\\|r_{o2})$ |\n| **Output Resistance** | $R_{out} = r_{o1} \\| r_{o2}$ |\n| **Input Resistance** | $R_{in} \\rightarrow \\infty$ (MOS gate) |\n\n> Both transistors contribute their transconductances **additively**, maximizing gain.\n\n---\n\n## Power Dissipation\n\n| Component | Expression |\n|-----------|------------|\n| Static | $P_{static} \\approx 0$ (one device always OFF) |\n| **Dynamic** (dominant) | $P_{dyn} = \\alpha \\, C_L \\, V_{DD}^2 \\, f$ |\n| Short-circuit (transitions) | $P_{sc} \\propto V_{DD} \\cdot f$ |\n\nwhere $\\alpha$ = activity factor, $C_L$ = load capacitance, $f$ = clock frequency.\n\n---\n\n## Key Advantages\n- Full rail-to-rail swing: $V_{OH} = V_{DD}$, $V_{OL} = 0$\n- Near-zero static power — fundamental CMOS advantage\n- High noise margins: $NM_H \\approx NM_L \\approx V_{DD}/2$",
        "format": "markdown",
        "sha256": "b31421fddd45ef7e421f3ca6a3d61ae524c47002af75ef76c400f391e1cf96ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up. The operating states and small-signal gain are also consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 17990,
        "total_tokens": 18309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16941,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 17990,
        "total_tokens": 18309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16941,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# CMOS Inverter Analysis\n\n## Circuit Identification\n\nThe circuit is a **CMOS Inverter** with:\n- **M₁ (NMOS):** Source → GND, Gate → V_in, Drain → V_out\n- **M₂ (PMOS):** Source → V_DD, Gate → V_in, Drain → V_out\n\nBoth gates are driven by V_in; both drains share the output node V_out.\n\n---\n\n## DC Analysis — Voltage Transfer Characteristic (VTC)\n\n| Region | Condition | M₁ | M₂ | V_out |\n|--------|-----------|----|----|-------|\n| I | $V_{in} < V_{thn}$ | OFF | Linear | $V_{DD}$ |\n| II | $V_{thn} \\leq V_{in} \\leq V_{IL}$ | **Sat** | Linear | Falling slowly |\n| III | $V_{IL} \\leq V_{in} \\leq V_{IH}$ | **Sat** | **Sat** | Steep fall (high gain) |\n| IV | $V_{IH} \\leq V_{in} \\leq V_{DD}-|V_{tp}|$ | Linear | **Sat** | Falling rapidly |\n| V | $V_{in} > V_{DD}-|V_{tp}|$ | Linear | OFF | $0$ |\n\n### Switching Threshold $V_M$\n\nAt $V_{in} = V_{out} = V_M$ (both in saturation), setting $I_{D1} = I_{D2}$:\n\n$$\\boxed{V_M = \\frac{\\sqrt{k_p/k_n}\\,(V_{DD}-|V_{tp}|) + V_{thn}}{1 + \\sqrt{k_p/k_n}}}$$\n\nFor a **symmetric design** ($k_n = k_p$, $V_{thn} = |V_{tp}|$):\n$$V_M = \\dfrac{V_{DD}}{2}$$\n\n---\n\n## Small-Signal Analysis\n\nWith both transistors in saturation and V_DD, GND as AC grounds, applying KCL at V_out:\n\n$$\\underbrace{(g_{m1}+g_{m2})\\,v_{in}}_{\\text{both } g_m \\text{ sources drain } v_{out}} + v_{out}\\!\\left(\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right) = 0$$\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -(g_{m1}+g_{m2})(r_{o1}\\|r_{o2})}$$\n\n> Both transconductances **add** because M₁ pulls V_out low *and* M₂ reduces current into V_out when $v_{in}$ increases — both effects reinforce the inversion.\n\n**Output Resistance:**\n$$R_{out} = r_{o1} \\| r_{o2}$$\n\n---\n\n## Noise Margins\n\n$$NM_L = V_{IL} - 0 = V_{IL}, \\qquad NM_H = V_{DD} - V_{IH}$$\n\nFor a symmetric design:\n$$NM_L \\approx NM_H \\approx \\frac{V_{DD}}{2}$$\n\n---\n\n## Power Dissipation\n\n| Mode | Power |\n|------|-------|\n| **Static** | $P_{static} \\approx 0$ (no DC path in either logic state) |\n| **Dynamic** | $P_{dyn} = \\alpha\\, C_L\\, V_{DD}^2\\, f$ |\n\n---\n\n## Key Takeaways\n\n1. **Rail-to-rail swing:** $V_{OL} = 0$, $V_{OH} = V_{DD}$\n2. **High gain** at $V_M$: $|A_v| = (g_{m1}+g_{m2})(r_{o1}\\|r_{o2})$\n3. **Near-zero static power** — fundamental advantage of CMOS\n4. **High noise immunity:** $NM \\approx V_{DD}/2$ for symmetric design",
        "format": "markdown",
        "sha256": "6edfebdd03cbe886bbf6288dcef43718e0f20eee0bbf2f78d415fa581e8c97c4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up. Its analysis preserves the inverter’s operation and negative small-signal gain; optional extra details do not reduce credit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 25740,
        "total_tokens": 26059,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 25740,
        "total_tokens": 26059,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# CMOS Inverter Analysis\n\n## Circuit Identification\n\n| Transistor | Type | Source | Gate | Drain |\n|---|---|---|---|---|\n| M₁ | PMOS | V_DD | V_in | V_out |\n| M₂ | NMOS | GND | V_in | V_out |\n\nBoth gates are driven by V_in; the output is at the **common drain node**.\n\n---\n\n## DC Analysis — Voltage Transfer Characteristic (VTC)\n\n### Five Operating Regions\n\n| Region | V_in Range | M₁ State | M₂ State | V_out |\n|---|---|---|---|---|\n| **1** | $0 \\leq V_{in} < V_{tn}$ | ON (linear) | OFF | $V_{DD}$ |\n| **2** | $V_{tn} \\leq V_{in} < V_M$ | ON (linear) | ON (sat.) | Decreasing |\n| **3** | $V_{in} = V_M$ | ON (sat.) | ON (sat.) | $V_M$ |\n| **4** | $V_M < V_{in} \\leq V_{DD}-|V_{tp}|$ | ON (sat.) | ON (linear) | Decreasing |\n| **5** | $V_{in} > V_{DD}-|V_{tp}|$ | OFF | ON (sat.) | 0 |\n\n### Switching Threshold V_M\nSetting $I_{D1} = I_{D2}$ with both transistors in saturation ($V_{in} = V_{out} = V_M$):\n\n$$\\boxed{V_M = \\frac{V_{tn}\\sqrt{k_n}+\\left(V_{DD}-|V_{tp}|\\right)\\sqrt{k_p}}{\\sqrt{k_n}+\\sqrt{k_p}}}$$\n\nwhere $k_{n,p} = \\mu_{n,p}C_{ox}(W/L)_{n,p}$.\n\n> For a **symmetric design** $(k_n = k_p,\\ V_{tn} = |V_{tp}|)$: $V_M = V_{DD}/2$\n\n---\n\n## Small-Signal Analysis\n*(Bias point: Region 3, both transistors in saturation)*\n\n**Small-signal equivalent circuit** — KCL at $v_{out}$:\n\n$$g_{m1}v_{in} + \\frac{v_{out}}{r_{o1}} + g_{m2}v_{in} + \\frac{v_{out}}{r_{o2}} = 0$$\n\n### Voltage Gain\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -(g_{m1}+g_{m2})(r_{o1} \\| r_{o2})}$$\n\nThe **negative sign** confirms signal inversion; the gain magnitude is large since $r_{o} \\gg 1/g_m$.\n\n### Output Resistance\n\n$$R_{out} = r_{o1} \\| r_{o2}$$\n\n---\n\n## Power Dissipation\n\n| Component | Expression | Note |\n|---|---|---|\n| Static | $P_{static} \\approx 0$ | One device always OFF |\n| Dynamic | $P_{dyn} = \\alpha C_L V_{DD}^2 f$ | Dominant in digital operation |\n| Short-circuit | $P_{sc} = V_{DD}\\cdot\\bar{I}_{sc}\\cdot t_{sc}\\cdot f$ | During switching transient |\n\n---\n\n## Key Performance Metrics\n\n| Parameter | Value |\n|---|---|\n| Output high ($V_{OH}$) | $V_{DD}$ |\n| Output low ($V_{OL}$) | $0$ |\n| High noise margin | $NM_H = V_{DD} - V_{IH}$ |\n| Low noise margin | $NM_L = V_{IL}$ |\n\n**Principal advantages:** zero static power dissipation, full rail-to-rail swing, and high noise immunity — the fundamental reasons CMOS dominates digital IC design.",
        "format": "markdown",
        "sha256": "8e8a8d85a1681b342e7719d8c41711ebfc7af482089425f119d4bf5995192bfe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper transistor as PMOS; both devices are NMOS. The golden solution requires correct identification of both device types, so this receives 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 20719,
        "total_tokens": 21038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19718,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 20719,
        "total_tokens": 21038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19718,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# CMOS Inverter Analysis\n\n## Circuit Identification\n\nThis is a **CMOS (Complementary MOS) Inverter**:\n- **M₁**: PMOS — Source → V_DD, Gate → V_in, Drain → V_out\n- **M₂**: NMOS — Source → GND, Gate → V_in, Drain → V_out\n\n---\n\n## DC Analysis: Two Operating States\n\n| Condition | M₁ (PMOS) | M₂ (NMOS) | V_out |\n|-----------|-----------|-----------|-------|\n| V_in = 0 | V_GS1 = −V_DD → **ON** | V_GS2 = 0 < V_tn → **OFF** | **V_DD (High)** |\n| V_in = V_DD | V_GS1 = 0 > V_tp → **OFF** | V_GS2 = V_DD > V_tn → **ON** | **0 (Low)** |\n\n→ **Inverting logic function**: V_out = NOT(V_in)\n\n---\n\n## Voltage Transfer Characteristic (VTC)\n\nFive distinct regions as V_in increases from 0 to V_DD:\n\n$$\\text{I: } V_{out} = V_{DD} \\quad\\rightarrow\\quad \\text{II}\\rightarrow\\text{III (transition)}\\rightarrow\\text{IV} \\quad\\rightarrow\\quad \\text{V: } V_{out} = 0$$\n\n**Switching Threshold** (both transistors simultaneously in saturation):\n\n$$\\boxed{V_M = \\frac{V_{tn} + \\sqrt{k_p/k_n}\\,(V_{DD}-|V_{tp}|)}{1+\\sqrt{k_p/k_n}}}$$\n\nFor a symmetric design ($k_n = k_p$, $V_{tn} = |V_{tp}|$): $V_M = V_{DD}/2$\n\n---\n\n## Small-Signal Voltage Gain\n\nWith both transistors in saturation at the bias point, applying KCL at V_out:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -(g_{m1}+g_{m2})(r_{o1} \\| r_{o2})}$$\n\n**Output resistance:**\n$$R_{out} = r_{o1} \\| r_{o2} = \\frac{1}{(\\lambda_n+\\lambda_p)|I_D|}$$\n\nThe gain magnitude is typically large (20–50 V/V for minimum-size devices).\n\n---\n\n## Power Dissipation\n\n| Type | Expression | Comment |\n|------|-----------|---------|\n| **Static** | $P_{static} \\approx 0$ | One transistor always OFF |\n| **Dynamic** | $P_{dyn} = \\alpha C_L V_{DD}^2 f$ | Dominant in real circuits |\n\n> Zero static dissipation is the **primary advantage** of CMOS over pure NMOS/PMOS designs.\n\n---\n\n## Noise Margins (Symmetric Case)\n\n$$NM_H = V_{DD} - V_{IH}, \\qquad NM_L = V_{IL}$$\n\nFor $k_n = k_p$ and $V_{tn} = |V_{tp}|$:\n$$NM_H = NM_L \\approx \\frac{V_{DD}}{2} - V_T$$\n\nThis high noise immunity and rail-to-rail output swing make the CMOS inverter the fundamental building block of all modern digital logic.",
        "format": "markdown",
        "sha256": "62eb5854f75359d1493a59ee9bf82a0ce4fa49948089aa23c961a1cbd1d31bb7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary complementary CMOS inverter; the figure has two NMOS devices, so the required topology and behavior are missed.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 7066,
        "total_tokens": 7385,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6177,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 7066,
        "total_tokens": 7385,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6177,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# CMOS Inverter Analysis\n\n## Circuit Identification\n\nThis is a **CMOS Inverter** consisting of:\n- **M₁**: PMOS transistor (Source → V_DD, Gate → V_in, Drain → V_out)\n- **M₂**: NMOS transistor (Drain → V_out, Gate → V_in, Source → GND)\n\n---\n\n## Voltage Transfer Characteristic (VTC) — Five Regions\n\n| Region | V_in Range | M₁ State | M₂ State | V_out |\n|--------|-----------|-----------|-----------|-------|\n| **A** | V_in < V_TN | Triode | **OFF** | V_DD |\n| **B** | V_TN ≤ V_in ≤ V_IL | Triode | Saturation | Decreasing ↓ |\n| **C** | V_IL ≤ V_in ≤ V_IH | **Saturation** | **Saturation** | Steep transition |\n| **D** | V_IH ≤ V_in ≤ V_DD−\\|V_TP\\| | Saturation | Triode | Approaching 0 |\n| **E** | V_in > V_DD−\\|V_TP\\| | **OFF** | Triode | 0 V |\n\n---\n\n## Switching Threshold\n\nSetting $I_{D1} = I_{D2}$ with both transistors in saturation:\n\n$$\\boxed{V_{th} = \\frac{V_{TN}\\sqrt{k_n} + (V_{DD}-|V_{TP}|)\\sqrt{k_p}}{\\sqrt{k_n}+\\sqrt{k_p}}}$$\n\nwhere $k_{n,p} = \\mu_{n,p}C_{ox}(W/L)_{n,p}$\n\n> For a **symmetric design** ($k_n = k_p$, $V_{TN} = |V_{TP}|$): $\\;V_{th} = V_{DD}/2$\n\n---\n\n## Noise Margins\n\n$$NM_H = V_{OH} - V_{IH} = V_{DD} - V_{IH}$$\n$$NM_L = V_{IL} - V_{OL} = V_{IL} - 0$$\n\nFor the symmetric inverter: $NM_H = NM_L \\approx \\dfrac{V_{DD}}{2} - V_T$\n\n---\n\n## Small-Signal Gain (Region C — both in saturation)\n\n$$A_v = \\frac{v_{out}}{v_{in}} = -(g_{m1}+g_{m2})(r_{ds1} \\| r_{ds2})$$\n\nThe gain is **very large** (sharp VTC slope), which provides excellent noise immunity.\n\n---\n\n## Power Dissipation\n\n| Component | Expression |\n|-----------|-----------|\n| **Static** | $P_{static} \\approx 0$ (no DC path V_DD→GND at logic levels) |\n| **Dynamic** | $P_{dyn} = \\alpha f C_L V_{DD}^2$ |\n| **Short-circuit** | $P_{sc} = \\alpha f \\tau_{sc} V_{DD} I_{peak}$ (during transitions) |\n\n---\n\n## Summary of Key Properties\n\n1. **Logic Function**: V_out = $\\overline{V_{in}}$ (rail-to-rail, 0 ↔ V_DD)\n2. **High input impedance** (gate-insulated MOS structure)\n3. **Near-zero static power** — fundamental advantage of CMOS\n4. **High noise margins** due to steep VTC transition\n5. **Fundamental building block** of all CMOS digital logic",
        "format": "markdown",
        "sha256": "4392f85d4e915b35f7de23aef2234ea319ca09cdce4d447c3723c4c1fd2978c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary CMOS inverter. The figure has two NMOS devices; the required device identification rule assigns 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 8872,
        "total_tokens": 9191,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7942,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 8872,
        "total_tokens": 9191,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7942,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# CMOS Common-Source Amplifier with Diode-Connected PMOS Load\n\n## Circuit Identification\n\n| Transistor | Type | Configuration | Connections |\n|-----------|------|---------------|-------------|\n| **M₁** | NMOS | Common-Source (driver) | G→V_in, S→GND, D→V_out |\n| **M₂** | PMOS | Diode-Connected (active load) | S→V_DD, G=D→V_out |\n\nSince M₂'s gate is shorted to its drain, it is **always in saturation**:\n$$V_{SD2} = V_{SG2} \\geq V_{SG2} - |V_{tp}| \\quad\\checkmark$$\n\n---\n\n## DC Analysis\n\nSetting $I_{D1} = I_{D2}$ (KCL at $V_{out}$):\n\n$$\\frac{\\mu_n C_{ox}}{2}\\!\\left(\\frac{W}{L}\\right)_{\\!1}\\!(V_{in}-V_{tn})^2 = \\frac{\\mu_p C_{ox}}{2}\\!\\left(\\frac{W}{L}\\right)_{\\!2}\\!(V_{DD}-V_{out}-|V_{tp}|)^2$$\n\nSolving for $V_{out}$:\n\n$$\\boxed{V_{out} = V_{DD} - |V_{tp}| - \\sqrt{\\frac{\\mu_n C_{ox}(W/L)_1}{\\mu_p C_{ox}(W/L)_2}}\\;(V_{in} - V_{tn})}$$\n\n---\n\n## Small-Signal Analysis\n\nThe diode-connected M₂ presents a resistance $\\approx 1/g_{m2}$ (since $1/g_{m2} \\ll r_{o2}$).\n\n**Small-signal equivalent circuit at $V_{out}$:**\n\n$$v_{out} = \\underbrace{-g_{m1}v_{in}}_{\\text{M}_1\\text{ current source}} \\times \\underbrace{\\left(r_{o1} \\,\\|\\, r_{o2} \\,\\|\\, \\frac{1}{g_{m2}}\\right)}_{\\text{total load}}$$\n\n### Voltage Gain\n\n$$\\boxed{A_v = -g_{m1}\\!\\left(r_{o1} \\| r_{o2} \\| \\frac{1}{g_{m2}}\\right) \\approx -\\frac{g_{m1}}{g_{m2}} = -\\sqrt{\\frac{\\mu_n C_{ox}(W/L)_1}{\\mu_p C_{ox}(W/L)_2}}}$$\n\n> The gain depends only on the **ratio of device parameters** — making it process-variation tolerant.\n\n### Port Resistances\n\n$$R_{in} = \\infty \\qquad R_{out} = r_{o1} \\| r_{o2} \\| \\frac{1}{g_{m2}} \\approx \\frac{1}{g_{m2}}$$\n\n---\n\n## Summary of Key Properties\n\n| Property | Value |\n|----------|-------|\n| **Topology** | Inverting (CS) amplifier |\n| **Voltage Gain** | $-g_{m1}/g_{m2}$ (moderate, process-independent) |\n| **Input Resistance** | $\\infty$ |\n| **Output Resistance** | $\\approx 1/g_{m2}$ (low) |\n| **M₂ operating region** | Always saturation |\n| **Linear output range** | $V_{in}{-}V_{tn} \\leq V_{out} \\leq V_{DD}{-}|V_{tp}|$ |",
        "format": "markdown",
        "sha256": "5aebb68f033f3bad3ac7512e4c1bf08e2b6aac8bcfbc3755812917aca5f90cc2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS with diode-connected PMOS load and gives the inverting gain including both output resistances, along with the appropriate −gm1/gm2 approximation. Minor ancillary claims do not affect the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 787,
        "output_tokens": 12976,
        "total_tokens": 13763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 787,
        "output_tokens": 12976,
        "total_tokens": 13763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Source Amplifier with Diode-Connected PMOS Load\n\n## Circuit Identification\n\n| Transistor | Type | Configuration |\n|-----------|------|---------------|\n| M₁ | NMOS | Common-source (amplifying device) |\n| M₂ | PMOS | Diode-connected load (Gate = Drain = V_out) |\n\n---\n\n## DC Bias Analysis\n\nBoth transistors carry the **same drain current** (series connection):\n$$I_{D1} = I_{D2} = I_D$$\n\n**Saturation conditions:**\n$$M_1: V_{out} \\geq V_{in} - V_{thn}$$\n$$M_2: \\text{always in saturation (diode-connected)}$$\n\nA diode-connected MOSFET is **always** in saturation since $V_{DS} = V_{GS}$, which guarantees $V_{DS} \\geq V_{GS} - V_{th}$.\n\n---\n\n## Small-Signal Analysis\n\nSince M₂ is diode-connected (V_GS2 = V_DS2), it presents a **resistance to AC ground (V_DD)**:\n\n$$R_{M_2} = \\frac{1}{g_{m2}} \\| r_{o2} \\approx \\frac{1}{g_{m2}}$$\n\nApplying **KCL at V_out**:\n\n$$g_{m1}v_{in} + \\frac{v_{out}}{r_{o1}} + g_{m2}v_{out} + \\frac{v_{out}}{r_{o2}} = 0$$\n\nSolving:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_{m1}}{g_{m2}} \\cdot \\frac{1}{1 + \\frac{1}{g_{m2}r_{o1}} + \\frac{1}{g_{m2}r_{o2}}} \\approx -\\frac{g_{m1}}{g_{m2}}}$$\n\n---\n\n## Key Parameters\n\n**Voltage Gain** (using $g_m = \\sqrt{2\\mu C_{ox}(W/L)I_D}$):\n\n$$|A_v| = \\frac{g_{m1}}{g_{m2}} = \\sqrt{\\frac{\\mu_n C_{ox}(W/L)_1}{\\mu_p C_{ox}(W/L)_2}}$$\n\n| Parameter | Expression |\n|-----------|-----------|\n| **Voltage Gain** | $A_v \\approx -g_{m1}/g_{m2}$ |\n| **Input Resistance** | $R_{in} = \\infty$ |\n| **Output Resistance** | $R_{out} \\approx 1/g_{m2}$ |\n| **Phase** | 180° inversion |\n\n---\n\n## Summary\n\nThis inverting amplifier has a **gain set by the transconductance ratio** (not by supply or resistors), making it ideal for CMOS IC design. Since $\\mu_n > \\mu_p$, equal aspect ratios yield $|A_v| > 1$. The main limitation is the **low output resistance** ($1/g_{m2}$), which reduces gain compared to a current-source load.",
        "format": "markdown",
        "sha256": "9eb319a67acacfed2c29e2194d72fbbc6a0d0c5611b9b110e4dd769e26892270"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS with a diode-connected PMOS load and gives the inverting gain including channel-length modulation consistently for both devices.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 787,
        "output_tokens": 6735,
        "total_tokens": 7522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5927,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 787,
        "output_tokens": 6735,
        "total_tokens": 7522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5927,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Source Amplifier with Diode-Connected PMOS Load\n\n## Circuit Identification\n\n| Transistor | Type | Configuration |\n|-----------|------|---------------|\n| M₁ | NMOS | Common-source driver (Gate = V_in, Source = GND) |\n| M₂ | PMOS | Diode-connected load (Gate shorted to Drain = V_out, Source = V_DD) |\n\n---\n\n## DC Analysis\n\nSince M₂ is diode-connected, it is **always in saturation** (V_SD2 ≥ V_SG2 − |V_TP| is trivially satisfied).\n\nSetting I_D1 = I_D2 and solving for V_out:\n\n$$\\frac{1}{2}\\mu_n C_{ox}\\!\\left(\\frac{W}{L}\\right)_{\\!1}(V_{in}-V_{TN})^2 = \\frac{1}{2}\\mu_p C_{ox}\\!\\left(\\frac{W}{L}\\right)_{\\!2}(V_{DD}-V_{out}-|V_{TP}|)^2$$\n\n$$\\boxed{V_{out} = V_{DD} - |V_{TP}| - (V_{in} - V_{TN})\\sqrt{\\frac{\\mu_n C_{ox}(W/L)_1}{\\mu_p C_{ox}(W/L)_2}}}$$\n\n> The transfer characteristic is **linear** when both devices are in saturation — a key feature of this topology.\n\n---\n\n## Small-Signal Analysis\n\nThe diode-connected M₂ presents a small-signal resistance of $\\dfrac{1}{g_{m2}}\\|r_{o2}$ at V_out.\n\n**KCL at the output node:**\n\n$$v_{out} = -g_{m1}\\,v_{in}\\!\\left(r_{o1}\\,\\|\\,r_{o2}\\,\\Big\\|\\,\\frac{1}{g_{m2}}\\right)$$\n\nSince $\\dfrac{1}{g_{m2}} \\ll r_{o1},\\, r_{o2}$:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} \\approx -\\frac{g_{m1}}{g_{m2}} = -\\sqrt{\\frac{\\mu_n C_{ox}(W/L)_1}{\\mu_p C_{ox}(W/L)_2}}}$$\n\n| Parameter | Expression | Approximation |\n|-----------|-----------|---------------|\n| **Voltage Gain** | $-g_{m1}\\!\\left(r_{o1}\\|r_{o2}\\|\\tfrac{1}{g_{m2}}\\right)$ | $\\approx -g_{m1}/g_{m2}$ |\n| **Output Resistance** | $r_{o1}\\|r_{o2}\\|\\tfrac{1}{g_{m2}}$ | $\\approx 1/g_{m2}$ **(low)** |\n| **Input Resistance** | $\\infty$ | — |\n\n---\n\n## Key Observations\n\n1. **Inverting amplifier** (negative gain): increasing V_in raises I_D1, pulling V_out low.\n2. **Moderate, predictable gain**: ratio $g_{m1}/g_{m2}$ tracks process variations, making gain robust.\n3. **Low output resistance** (~1/g_m2): suitable for driving resistive loads but limits gain compared to a current-source load (where $A_v = -g_{m1}(r_{o1}\\|r_{o2})$).\n4. **No external biasing resistors** needed — M₂ is self-biasing.",
        "format": "markdown",
        "sha256": "8c841f395f34c35783763a49f059e564c86b2f44729540f05eb0519bd6ae7787"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS with diode-connected PMOS load and gives the inverting gain, including a consistent expression with both devices’ output resistances. The additional DC discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 787,
        "output_tokens": 8195,
        "total_tokens": 8982,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7285,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 787,
        "output_tokens": 8195,
        "total_tokens": 8982,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7285,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# PMOS Common-Source Amplifier with Current-Source Load\n\n## Circuit Identification\n\n| Transistor | Type | Configuration |\n|-----------|------|---------------|\n| **M₂** (upper) | PMOS | Common-source: S→V_DD, G→V_in, D→V_out |\n| **M₁** (lower) | NMOS (depletion) | Current-source load: G=S=GND (V_GS1 = 0) |\n\nSince M₁ has V_GS = 0, it must be **depletion-mode** (V_TN < 0) to remain on and provide a DC current path.\n\n---\n\n## DC Analysis\n\n**M₁** provides a constant bias current (independent of V_out):\n$$I_Q = \\frac{1}{2}\\mu_n C_{ox}\\!\\left(\\frac{W}{L}\\right)_{\\!1} V_{TN1}^2 = \\text{const.}$$\n\n**M₂** carries the same current when properly biased:\n$$I_Q = \\frac{1}{2}\\mu_p C_{ox}\\!\\left(\\frac{W}{L}\\right)_{\\!2}(V_{DD} - V_{IN} - |V_{TP}|)^2$$\n\n**Saturation conditions:**\n- M₁: $V_{out} \\geq |V_{TN1}|$\n- M₂: $V_{out} \\leq V_{in} + |V_{TP2}|$\n\n---\n\n## Small-Signal Analysis\n\nReplacing DC supplies with AC ground:\n\n- **M₂:** $v_{gs2} = v_{in}$; contributes current source $g_{m2}v_{in}$ + resistance $r_{o2}$\n- **M₁:** $v_{gs1} = 0$ → current source **vanishes**; M₁ reduces to resistor $r_{o1}$\n\nApplying KCL at the output node:\n\n$$g_{m2}v_{in} + \\frac{v_{out}}{r_{o2}} + \\frac{v_{out}}{r_{o1}} = 0$$\n\nSolving:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m2}(r_{o1} \\| r_{o2})}$$\n\n---\n\n## Key Parameters\n\n$$R_{in} = \\infty, \\qquad R_{out} = r_{o1} \\| r_{o2}$$\n\n**Gain expressed in terms of bias current** (using $r_o = 1/\\lambda I_Q$):\n\n$$|A_v| = \\frac{g_{m2}}{(\\lambda_n + \\lambda_p)\\,I_Q} \\propto \\frac{1}{\\sqrt{I_Q}}$$\n\n---\n\n## Why This Topology Gives High Gain\n\n| Load Type | Voltage Gain |\n|-----------|-------------|\n| Resistor $R_D$ | $-g_{m2}R_D$ (limited) |\n| Diode-connected NMOS | $\\approx -g_{m2}/g_{m1}$ (moderate) |\n| **Current source (this circuit)** | $-g_{m2}(r_{o1}\\|r_{o2})$ **(high)** |\n\nSince $r_{o} \\gg 1/g_m$, the current-source load dramatically increases the gain. This is the fundamental gain stage used in **CMOS operational amplifier** designs.",
        "format": "markdown",
        "sha256": "6ed56cd3197f1221a64bbc9feccc71c4105702568999d3a0f0f5cae87883d761"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies M1 as a depletion NMOS current-source load; M1 is a diode-connected PMOS load. This reverses the key small-signal mechanism and gives the wrong gain expression.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1559,
        "output_tokens": 35584,
        "total_tokens": 37143,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34712,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1559,
        "output_tokens": 35584,
        "total_tokens": 37143,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34712,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of PMOS Common-Source Amplifier with Diode-Connected NMOS Load\n\n## Circuit Topology\n\n| Device | Type | Connections |\n|--------|------|-------------|\n| **M₂** (top) | PMOS – amplifying device | Source→V_DD, Gate→V_in, Drain→V_out |\n| **M₁** (bottom) | NMOS – diode-connected active load | Gate = Drain→V_out, Source→GND, Body→GND |\n\n---\n\n## DC Analysis\n\n### Saturation Conditions\n\n**M₁ (diode-connected):** Since V_DS1 = V_GS1, the saturation condition V_DS ≥ V_GS − V_TN is *always* satisfied when M₁ is ON (requires V_out > V_TN).\n\n**M₂ (PMOS):** Requires V_SD2 ≥ V_SG2 − |V_TP|, which gives:\n$$V_{out} \\leq V_{in} + |V_{TP}|$$\n\n### Operating Point (ID1 = ID2 = IQ)\n\nSetting drain currents equal:\n\n$$\\underbrace{\\frac{1}{2}\\mu_n C_{ox}\\!\\left(\\frac{W}{L}\\right)_{\\!1}(V_{out}-V_{TN})^2}_{I_{D1}} = \\underbrace{\\frac{1}{2}\\mu_p C_{ox}\\!\\left(\\frac{W}{L}\\right)_{\\!2}(V_{DD}-V_{in}-|V_{TP}|)^2}_{I_{D2}}$$\n\nSolving for the output DC voltage:\n\n$$\\boxed{V_{out} = V_{TN} + \\sqrt{\\frac{\\mu_p(W/L)_2}{\\mu_n(W/L)_1}}\\cdot(V_{DD} - V_{in} - |V_{TP}|)}$$\n\n---\n\n## Small-Signal Analysis\n\n### Small-Signal Equivalent Circuit\n\n```\n        gm2·vin ↑  ro2             ro1   gm1·vout ↑\nVDD(AC) ─────────┬──────── Vout ───┬──── GND\n(= 0)            └─────────────────┘\n```\n\n**M₂:** v_gs2 = v_in (source at AC ground = V_DD)\n→ current source g_m2·v_in exits V_out toward V_DD\n\n**M₁:** v_gs1 = v_out (gate tied to drain)\n→ current source g_m1·v_out exits V_out toward GND\n\n### Voltage Gain\n\nApplying KCL at V_out (all currents **leaving** the node):\n\n$$g_{m2}\\,v_{in} + \\frac{v_{out}}{r_{o2}} + g_{m1}\\,v_{out} + \\frac{v_{out}}{r_{o1}} = 0$$\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_{m2}}{g_{m1}+\\dfrac{1}{r_{o1}}+\\dfrac{1}{r_{o2}}}}$$\n\nSince $g_{m1}(r_{o1}\\|r_{o2}) \\gg 1$:\n\n$$A_v \\approx -\\frac{g_{m2}}{g_{m1}} = -\\sqrt{\\frac{\\mu_p(W/L)_2}{\\mu_n(W/L)_1}}$$\n\n### Input and Output Resistance\n\n**Input resistance:**\n$$R_{in} = \\infty \\quad \\text{(ideal MOSFET gate)}$$\n\n**Output resistance** (set $v_{in}=0$; M₂ → $r_{o2}$; diode-connected M₁ → $\\tfrac{1}{g_{m1}}$):\n\n$$R_{out} = r_{o2} \\,\\Big\\|\\, \\frac{r_{o1}}{1+g_{m1}r_{o1}} \\approx r_{o2}\\,\\Big\\|\\,\\frac{1}{g_{m1}} \\approx \\frac{1}{g_{m1}}$$\n\n---\n\n## Summary\n\n| Parameter | Exact | Approximation |\n|-----------|-------|---------------|\n| Voltage gain $A_v$ | $-\\dfrac{g_{m2}}{g_{m1}+1/r_{o1}+1/r_{o2}}$ | $\\approx -\\dfrac{g_{m2}}{g_{m1}}$ |\n| Input resistance $R_{in}$ | $\\infty$ | $\\infty$ |\n| Output resistance $R_{out}$ | $r_{o2}\\,\\|\\,(r_{o1}\\,\\|\\,\\tfrac{1}{g_{m1}})$ | $\\approx \\dfrac{1}{g_{m1}}$ |\n\n---\n\n## Key Design Insights\n\n1. **Phase:** The amplifier **inverts** the signal (180° phase shift).\n2. **Gain** depends on the **mobility and aspect-ratio ratio**; since $\\mu_n \\approx 2$–$3\\,\\mu_p$, achieving $|A_v|>1$ requires $(W/L)_2 > \\frac{\\mu_n}{\\mu_p}(W/L)_1$.\n3. **Low output impedance** ($\\approx 1/g_{m1}$) makes the circuit suitable for driving capacitive loads with good bandwidth.\n4. **Trade-off:** Compared to a current-source load ($R_{out}\\approx r_{o1}\\|r_{o2}$), the diode-connected load sacrifices gain for a lower, more predictable $R_{out}$.",
        "format": "markdown",
        "sha256": "e007f40280d6d49637cfec9c73660546090dbab3bb37c08242fe0d22abb65eff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies M2 as a common-source input device and obtains the inverting gm/gm gain, but misreads M1 as an NMOS with gate and drain at Vout. The actual M1 is a diode-connected PMOS with gate and drain grounded, so the stated DC equation and mobility-based sizing conclusion are wrong; this is a substantial topology error.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1559,
        "output_tokens": 36588,
        "total_tokens": 38147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35135,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1559,
        "output_tokens": 36588,
        "total_tokens": 38147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35135,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: PMOS Common-Source Amplifier with Current-Source Load\n\n## Circuit Identification\n\n| Transistor | Type | Configuration |\n|-----------|------|--------------|\n| M₂ | PMOS | Common-source amplifier (Source→V_DD, Gate→V_in, Drain→V_out) |\n| M₁ | NMOS | Current-source load (Gate = Source = GND, so V_GS1 = 0) |\n\n---\n\n## DC Operating Point\n\n**M₁** (depletion-mode, $V_{GS1} = 0$) sets a **constant bias current**:\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 V_{TN1}^2$$\n\n**M₂** (PMOS in saturation) must supply the same current:\n$$I_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{SG2} - |V_{TP}|)^2, \\qquad V_{SG2} = V_{DD} - V_{in}$$\n\n---\n\n## Small-Signal Analysis\n\nSince V_DD and GND are both AC grounds, and M₁'s gate is at GND:\n\n$$v_{gs1} = 0 \\implies \\text{M}_1 \\text{ contributes only } r_{o1}$$\n\n**KCL at** $V_{out}$ (currents leaving the node):\n\n$$\\underbrace{g_{m2}\\,v_{in} + \\frac{v_{out}}{r_{o2}}}_{\\text{through M}_2} + \\underbrace{\\frac{v_{out}}{r_{o1}}}_{\\text{through M}_1} = 0$$\n\nSolving for $v_{out}$:\n\n$$v_{out}\\!\\left(\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right) = -g_{m2}\\,v_{in}$$\n\n---\n\n## Key Results\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m2}(r_{o1} \\| r_{o2})}$$\n\n| Parameter | Expression |\n|-----------|-----------|\n| Voltage Gain $A_v$ | $-g_{m2}(r_{o1}\\|r_{o2})$ |\n| Input Resistance $R_{in}$ | $\\infty$ (MOS gate) |\n| Output Resistance $R_{out}$ | $r_{o1}\\|r_{o2}$ |\n\n---\n\n## Key Observations\n\n1. **Inverting amplifier** — the negative sign indicates a 180° phase shift (inherent in common-source topology).\n2. **High gain** — since $r_{o1}\\|r_{o2} \\gg 1/g_{m}$, using a current source load (M₁) yields significantly higher gain than a resistive or diode-connected load.\n3. **M₁'s role** — because $v_{gs1} = 0$, the transconductance $g_{m1}$ *does not appear* in the gain; M₁ only contributes its output resistance $r_{o1}$.",
        "format": "markdown",
        "sha256": "25bc517d778f75e3d02a82bd039e04a4660662653f14eb9977c78d57d5dbaad5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a depletion-mode NMOS current-source load. It is a diode-connected PMOS load, so its transconductance sets the gm/gm gain; the proposed output-resistance gain and DC analysis describe a different circuit.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1559,
        "output_tokens": 23942,
        "total_tokens": 25501,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23126,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1559,
        "output_tokens": 23942,
        "total_tokens": 25501,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23126,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Finding R_out in the PMOS Cascode Circuit\n\n## Circuit Identification\n\nThe circuit shows a **PMOS cascode** configuration:\n- **M₂** (top PMOS): Source → V_DD, Gate → V_b2, Drain → node X\n- **M₁** (bottom PMOS): Source → node X, Gate → V_b1, Drain → output\n\nSince both gates are at DC bias (AC ground), this is a **cascode (telescopic)** current source.\n\n## Small-Signal Analysis\n\nApply test voltage $V_t$ at the output; find $i_t$.\n\n**For M₂** (gate and source at AC ground, drain at $V_X$):\n$$v_{gs2} = 0, \\quad v_{ds2} = V_X$$\n$$\\Rightarrow \\text{Impedance seen at node X} = r_{o2}$$\n\n**For M₁** (common-gate configuration, gate at AC ground, source at $V_X$, drain at $V_t$):\n$$v_{gs1} = -V_X, \\quad v_{ds1} = V_t - V_X$$\n$$i_{d1} = -g_{m1}V_X + \\frac{V_t - V_X}{r_{o1}}$$\n\n**KCL at node X** (no current enters X from outside):\n$$\\frac{V_X}{r_{o2}} + g_{m1}V_X - \\frac{V_t - V_X}{r_{o1}} = 0$$\n\nSolving for $V_X$:\n$$V_X = \\frac{V_t/r_{o1}}{g_{m1} + 1/r_{o1} + 1/r_{o2}}$$\n\n**Test current** $i_t = i_{d1}$:\n$$i_t = \\frac{V_t}{r_{o1}} - V_X\\!\\left(g_{m1} + \\frac{1}{r_{o1}}\\right) = \\frac{V_t}{r_{o1}} \\cdot \\frac{1/r_{o2}}{g_{m1}+1/r_{o1}+1/r_{o2}}$$\n\n$$i_t = \\frac{V_t}{r_{o1}r_{o2}g_{m1} + r_{o1} + r_{o2}}$$\n\n## Result\n\n$$\\boxed{R_{out} = \\frac{V_t}{i_t} = r_{o1} + r_{o2} + g_{m1}r_{o1}r_{o2}}$$\n\nThis can also be written as $R_{out} = r_{o2}\\bigl(1 + g_{m1}r_{o1}\\bigr) + r_{o1}$, which for $g_{m1}r_{o1} \\gg 1$ simplifies to:\n\n$$R_{out} \\approx g_{m1}r_{o1}r_{o2}$$\n\nThe cascode transistor M₁ **boosts the output resistance** by a factor of $g_{m1}r_{o1}$ compared to a single transistor ($r_{o2}$ alone).",
        "format": "markdown",
        "sha256": "dcc3dab4afb3ab54ab9655f3b8ea1ad7a4f1fe1ddac827cd1bd754349a759779"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M1 as the cascode device, and gives the correct output-resistance expression and approximation. Body effect is optional.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1582,
        "output_tokens": 21674,
        "total_tokens": 23256,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20884,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1582,
        "output_tokens": 21674,
        "total_tokens": 23256,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20884,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Finding R$_{out}$ for the Stacked PMOS/NMOS Circuit\n\n## Circuit Identification\n\nFrom the figure:\n- **M₂ (PMOS):** Source → V$_{DD}$ (AC ground), Gate → V$_{b2}$ (AC ground), Drain → Node X\n- **M₁ (NMOS):** Drain → Node X, Gate → V$_{b1}$ (AC ground), Source → Output\n\nSince both bias voltages are AC ground, I apply a **test voltage** $v_x$ at the output (source of M₁) and find $i_x$.\n\n## Small-Signal Analysis\n\n**M₂ simplification:** Since $v_{gs2} = v_{g2} - v_{s2} = 0 - 0 = 0$, the controlled current source vanishes. M₂ reduces to **$r_{o2}$** from node X to AC ground.\n\n**KCL at Node X** (voltages: $v_X$ at X, $v_x$ at output):\n\n$$\\underbrace{\\frac{v_X}{r_{o2}}}_{\\text{through }r_{o2}} + \\underbrace{\\left(-g_{m1}v_x + \\frac{v_X - v_x}{r_{o1}}\\right)}_{i_{d1}\\text{ into M}_1\\text{ drain}} = 0$$\n\nSolving for $v_X$:\n$$v_X = \\frac{(1 + g_{m1}r_{o1})\\,r_{o2}}{r_{o1} + r_{o2}}\\cdot v_x$$\n\n**KCL at Output Node** (using MOSFET KCL: $i_s = -i_d$):\n\n$$i_x = i_{s1} = g_{m1}v_x - \\frac{v_X - v_x}{r_{o1}}$$\n\nSubstituting $v_X$:\n\n$$i_x = v_x \\cdot \\frac{g_{m1}r_{o1} + 1}{r_{o1} + r_{o2}}$$\n\n## Result\n\n$$\\boxed{R_{\\text{out}} = \\frac{v_x}{i_x} = \\frac{r_{o1} + r_{o2}}{1 + g_{m1}r_{o1}}}$$\n\n## Verification\n\n| Condition | Result |\n|-----------|--------|\n| $r_{o2} \\to 0$ (drain at AC gnd) | $R_{\\text{out}} = \\dfrac{r_{o1}}{1+g_{m1}r_{o1}} \\approx \\dfrac{1}{g_{m1}}$ ✓ (standard source follower) |\n| $g_{m1}r_{o1} \\gg 1$ | $R_{\\text{out}} \\approx \\dfrac{1}{g_{m1}} + \\dfrac{r_{o2}}{g_{m1}r_{o1}}$ |\n\nThis low output resistance is characteristic of the **source-follower** configuration of M₁, with M₂ contributing through $r_{o2}$.",
        "format": "markdown",
        "sha256": "93589c92a93f52e81e79fa4975411b2c9e4c982ce6b8ca6dc3be4e34befeac64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS source follower and gives a low output resistance. In the figure, M1 is the PMOS common-gate cascode, so Rout is approximately gm1·ro1·ro2. The small-signal work on M2 provides limited relevant understanding, but the topology and conclusion are wrong.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1582,
        "output_tokens": 30086,
        "total_tokens": 31668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1582,
        "output_tokens": 30086,
        "total_tokens": 31668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Finding R_out for the Cascode PMOS Current Source\n\n### Circuit Configuration\n- **M₂ (PMOS, top):** Source → V_DD (AC ground), Gate → V_b2 (AC ground), Drain → Node X\n- **M₁ (PMOS, bottom):** Source → Node X, Gate → V_b1 (AC ground), Drain → Output\n\n### Small-Signal Analysis\n\nApply test voltage $v_x$ at the output with all independent sources zeroed (V_DD, V_b1, V_b2 → 0).\n\n**For M₂** (gate and source both at AC ground):\n$$v_{gs2} = 0, \\quad v_{ds2} = v_X$$\n$$i_{D2} = \\frac{v_X}{r_{o2}} \\quad \\text{(current leaving node X through M₂)}$$\n\n**For M₁** (source at X, gate grounded):\n$$v_{gs1} = -v_X, \\quad v_{ds1} = v_x - v_X$$\n$$i_{D\\to S,1} = -g_{m1}v_X + \\frac{v_x - v_X}{r_{o1}} \\quad \\text{(current entering node X from M₁)}$$\n\n### KCL at Node X\nSetting current entering = current leaving:\n$$-g_{m1}v_X + \\frac{v_x - v_X}{r_{o1}} = \\frac{v_X}{r_{o2}}$$\n\nSolving for $v_X$:\n$$\\boxed{v_X = \\frac{v_x/r_{o1}}{g_{m1} + 1/r_{o1} + 1/r_{o2}}}$$\n\n### KCL at Output Node\n$$i_x = -g_{m1}v_X + \\frac{v_x - v_X}{r_{o1}} = \\frac{v_x}{r_{o1}}\\cdot\\frac{1/r_{o2}}{g_{m1}+1/r_{o1}+1/r_{o2}}$$\n\n### Output Resistance\n\n$$R_{out} = \\frac{v_x}{i_x} = r_{o1}\\cdot r_{o2}\\left(g_{m1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}\\right)$$\n\n$$\\boxed{R_{out} = r_{o1} + r_{o2} + g_{m1}r_{o1}r_{o2}}$$\n\nThis can be compactly written as:\n\n$$R_{out} = r_{o2}(1 + g_{m1}r_{o1}) + r_{o1} \\approx g_{m1}r_{o1}r_{o2}$$\n\n### Physical Interpretation\nM₁ operates in **common-gate** configuration with $r_{o2}$ as its source resistance. The cascode transistor M₁ boosts the output resistance by a factor of $(1 + g_{m1}r_{o1}) \\approx g_{m1}r_{o1}$, yielding the characteristic $g_{m1}r_{o1}r_{o2}$ result.",
        "format": "markdown",
        "sha256": "dd25c2b7f1232b989886a99d761e636f5aa60f7ee8fc63c376cdad780feb7bb4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M1 as the common-gate cascode, and gives Rout = ro1 + ro2 + gm1 ro1 ro2 with the appropriate dominant approximation. Body effect is optional.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1582,
        "output_tokens": 39954,
        "total_tokens": 41536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39152,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1582,
        "output_tokens": 39954,
        "total_tokens": 41536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39152,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Ensuring M2 Remains in Saturation\n\n### Saturation Condition for M2 (PMOS)\n\nFor a PMOS transistor, saturation requires:\n\n$$|V_{SD}| \\geq |V_{SG}| - |V_{TP}|$$\n\nFor **M2** (source at $V_{DD}$, drain at node X):\n\n$$\\boxed{V_X \\leq V_{b2} + |V_{TP}|}$$\n\nThis means node X must not rise too close to $V_{DD}$, which would push M2 into the triode region.\n\n### Voltage at Node X\n\nThe cascode transistor M1 (source at X, gate at $V_{b1}$) **clamps** node X at:\n\n$$V_X \\approx V_{b1} + |V_{SG1}| = V_{b1} + |V_{TP}| + |V_{OV}|$$\n\n### Design Constraint\n\nSubstituting into the saturation condition:\n\n$$V_{b1} + |V_{TP}| + |V_{OV}| \\leq V_{b2} + |V_{TP}|$$\n\n$$\\therefore \\quad V_{b2} \\geq V_{b1} + |V_{OV}|$$\n\n| Condition | M2 State |\n|-----------|----------|\n| $V_{b2} < V_{b1} + |V_{OV}|$ | Triode |\n| $V_{b2} = V_{b1} + |V_{OV}|$ | Edge of saturation ($|V_{SD2}| = |V_{OV}|$) |\n| $V_{b2} > V_{b1} + |V_{OV}|$ | Fully in saturation ✓ |\n\n### Summary\n\nM2 is kept in saturation by **properly choosing** $V_{b2} \\geq V_{b1} + |V_{OV}|$. The cascode device M1 plays a critical role by holding $V_X$ at a fixed, known voltage, shielding M2's drain from output voltage swings and ensuring $V_X \\leq V_{b2} + |V_{TP}|$ over the operating range.",
        "format": "markdown",
        "sha256": "d6d60ed1275b92f87bafbb3c682a26a4b46b614ebbc473ad9c2fee148d54577d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS saturation condition, relates VX to Vb1 through M1, and derives the equivalent requirement that Vb2 exceed Vb1 by M1’s overdrive.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1556,
        "output_tokens": 13617,
        "total_tokens": 15173,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13068,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1556,
        "output_tokens": 13617,
        "total_tokens": 15173,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13068,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Ensuring M2 Remains in Saturation\n\n### Identifying the Nodes for M2\n\nFor the PMOS transistor M2:\n| Terminal | Voltage |\n|----------|---------|\n| Source (S) | $V_{DD}$ |\n| Gate (G) | $V_{b2}$ |\n| Drain (D) | $V_X$ |\n\n### Saturation Condition for PMOS\n\nA PMOS transistor is in saturation when:\n$$V_{SD} \\geq V_{SG} - |V_{tp}|$$\n\nSubstituting the node voltages for M2:\n$$\\underbrace{(V_{DD} - V_X)}_{V_{SD2}} \\geq \\underbrace{(V_{DD} - V_{b2})}_{V_{SG2}} - |V_{tp2}|$$\n\nSimplifying:\n\n$$\\boxed{V_X \\leq V_{b2} + |V_{tp2}|}$$\n\n### How to Satisfy This Condition\n\nSince node X is the **source of M1**, its voltage is set by M1's bias:\n$$V_X \\approx V_{b1} + |V_{tp1}| + V_{OV1}$$\n\nSubstituting into the saturation requirement:\n$$V_{b1} + |V_{tp1}| + V_{OV1} \\leq V_{b2} + |V_{tp2}|}$$\n\nFor matched transistors ($|V_{tp1}| = |V_{tp2}|$):\n\n$$V_{b2} \\geq V_{b1} + V_{OV}$$\n\n### Design Rule\n\n> **M2 stays in saturation as long as $V_X$ doesn't exceed $V_{b2} + |V_{tp2}|$**, which is guaranteed by choosing $V_{b2}$ at least one overdrive voltage higher than $V_{b1}$.",
        "format": "markdown",
        "sha256": "668e6aa10cda9a81ea67bb84acebcbe53e29ae00bcdf9df2c664c3f97f032396"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS saturation condition and relates X to M1’s bias, yielding the equivalent condition that Vb2 exceed Vb1 by at least M1’s overdrive voltage.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1556,
        "output_tokens": 7167,
        "total_tokens": 8723,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1556,
        "output_tokens": 7167,
        "total_tokens": 8723,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Ensuring M2 Remains in Saturation\n\n### Saturation Condition for M2\n\nFor PMOS transistor M2 (source at V$_{DD}$, gate at V$_{b2}$, drain at node X), saturation requires:\n\n$$V_{SD2} \\geq |V_{ov2}| \\implies V_{DD} - V_X \\geq |V_{ov2}|$$\n\nEquivalently:\n$$\\boxed{V_X \\leq V_{b2} + |V_{tp2}|}$$\n\n### How Node X Voltage is Set\n\nM1 (PMOS source follower-like behavior with source at X, gate at V$_{b1}$) fixes node X at:\n\n$$V_X = V_{b1} + |V_{SGl}| = V_{b1} + |V_{tp1}| + |V_{ov1}|$$\n\n### Required Bias Condition\n\nSubstituting into the saturation condition for M2:\n\n$$V_{b1} + |V_{tp1}| + |V_{ov1}| \\leq V_{b2} + |V_{tp2}|$$\n\nFor **identical transistors** (same $|V_{tp}|$, same $|V_{ov}|$):\n\n$$\\boxed{V_{b2} \\geq V_{b1} + |V_{ov}|}$$\n\n### Physical Interpretation\n\n| Condition | M2 Region |\n|-----------|-----------|\n| $V_{b2} > V_{b1} + \\|V_{ov}\\|$ | **Saturation** ✓ |\n| $V_{b2} = V_{b1} + \\|V_{ov}\\|$ | Edge of saturation |\n| $V_{b2} < V_{b1} + \\|V_{ov}\\|$ | **Triode** ✗ |\n\nBy setting V$_{b2}$ at least one overdrive voltage higher than V$_{b1}$, node X is kept sufficiently below V$_{DD}$, guaranteeing $V_{SD2} \\geq |V_{ov2}|$ and maintaining M2 in saturation — a critical requirement for achieving high output resistance $R_{out} \\approx g_{m1}r_{o1}r_{o2}$.",
        "format": "markdown",
        "sha256": "e6a8a30ad62b5c11ad9e901e31312ff2a920442ad35b0c621897c34541a3afef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and uses V_X = V_b1 + |V_SG1| to derive the required bias relation. The identical-device simplification is consistent with the stated assumption.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1556,
        "output_tokens": 15711,
        "total_tokens": 17267,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15146,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1556,
        "output_tokens": 15711,
        "total_tokens": 17267,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15146,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Cascode Amplifier Analysis\n\n## Circuit Identification\n\nThis is a **telescopic (stacked) cascode amplifier** comprising:\n- **M₁** — NMOS common-source input stage (gate: $v_{in}$, source: GND)\n- **M₂** — NMOS common-gate cascode stage (gate: $V_{b1}$, source: node X)\n- **I₁** — Ideal current source load (sets bias current)\n\n---\n\n## DC Biasing\n\nBoth transistors carry equal drain current $I_D = I_1$. For proper saturation:\n\n| Transistor | Saturation Condition |\n|:----------:|:--------------------:|\n| M₁ | $V_X \\geq V_{GS1} - V_{th1} = V_{ov1}$ |\n| M₂ | $V_{out} - V_X \\geq V_{b1} - V_X - V_{th2} = V_{ov2}$ |\n\n$$\\boxed{V_{out,\\min} = V_{ov1} + V_{ov2}}$$\n\n---\n\n## Small-Signal Analysis\n\nSince $I_1$ is ideal, it acts as an **open circuit** in small signal ($i_{ac} = 0$).\n\n**KCL at $V_{out}$** (no current path through open $I_1$):\n$$i_{d2} = 0 \\implies -(g_{m2})v_X + \\frac{v_{out}-v_X}{r_{o2}} = 0$$\n$$\\therefore \\quad v_{out} = (1 + g_{m2}r_{o2})\\,v_X$$\n\n**KCL at node X** ($i_{d2} = i_{d1}$, with $i_{d2}=0$):\n$$g_{m1}v_{in} + \\frac{v_X}{r_{o1}} = 0 \\implies v_X = -g_{m1}r_{o1}\\,v_{in}$$\n\n**Voltage Gain:**\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -\\,g_{m1}r_{o1}(1+g_{m2}r_{o2}) \\approx -\\,g_{m1}g_{m2}r_{o1}r_{o2}}$$\n\nThis equals the **product of the intrinsic gains** of M₁ and M₂, yielding very high gain.\n\n---\n\n## Output Resistance\n\nSetting $v_{in}=0$ (M₁ reduces to $r_{o1}$) and applying test voltage $v_t$:\n\n$$\\boxed{R_{out} = r_{o1} + r_{o2} + g_{m2}r_{o1}r_{o2} \\approx g_{m2}r_{o1}r_{o2}}$$\n\nThis is a **boosted** output impedance — much larger than a single-transistor stage ($r_o$).\n\n---\n\n## Summary of Key Parameters\n\n| Parameter | Expression | Approximation |\n|-----------|-----------|---------------|\n| Transconductance | $G_m = g_{m1}$ | — |\n| Output resistance | $r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}$ | $g_{m2}r_{o1}r_{o2}$ |\n| Voltage gain | $-G_m \\cdot R_{out}$ | $-g_{m1}g_{m2}r_{o1}r_{o2}$ |\n| Input resistance | $\\infty$ | (capacitive only) |\n\n---\n\n## Key Advantages\n\n1. **Ultra-high gain** — voltage gain $\\approx (g_m r_o)^2$, the square of the single-transistor intrinsic gain\n2. **High output impedance** — boosts $r_o$ by factor $g_{m2}r_{o2}$\n3. **Improved bandwidth** — node X is a low-impedance node, suppressing the **Miller effect** on M₁'s $C_{gd}$",
        "format": "markdown",
        "sha256": "ce799fed39a2b3b8f8f2e0bee2ef78eaa75893bef52b88cc67550b6bf9e2af40"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the equivalent ideal-load gain. Omitting body effect is allowed by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1447,
        "output_tokens": 18083,
        "total_tokens": 19530,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1447,
        "output_tokens": 18083,
        "total_tokens": 19530,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Cascode Amplifier Analysis\n\n## Circuit Identification\n\nThis is a **telescopic cascode amplifier** consisting of:\n- **M₁** (bottom): Common-source stage — gate driven by $v_{in}$, source at GND, drain at node X\n- **M₂** (top): Common-gate stage — gate fixed at $V_{b1}$ (AC ground), source at X, drain at $v_{out}$\n- **I₁**: Ideal current-source load from $V_{DD}$\n\n---\n\n## DC Biasing\n\nBoth transistors must remain in **saturation**:\n\n| Transistor | Saturation Condition |\n|---|---|\n| M₁ | $V_{DS1} > V_{GS1} - V_{th1}$ → $V_X > V_{IN} - V_{th1}$ |\n| M₂ | $V_{DS2} > V_{GS2} - V_{th2}$ → $V_{out} > V_{b1} - V_{th2}$ |\n\nThe bias voltage $V_{b1}$ must be chosen so that M₂ sits M₁ in saturation while keeping M₂ itself saturated — requiring:\n$$V_{b1} \\geq V_{X} + V_{th2} + V_{DS2,sat}$$\n\n---\n\n## Small-Signal Analysis\n\nUsing the small-signal model (body effect neglected; $I_1$ is an open circuit in AC):\n\n**Key variables:** $v_{gs1} = v_{in}$, $\\quad v_{gs2} = -v_x$\n\n### KCL at Node X\n$$\\underbrace{g_{m1}v_{in} + \\frac{v_x}{r_{o1}}}_{\\text{current out through } M_1} = \\underbrace{-g_{m2}v_x + \\frac{v_{out}-v_x}{r_{o2}}}_{\\text{current in from } M_2}$$\n\n### Open-Circuit Voltage Gain\nSetting $i_{d2} = 0$ (no AC current from ideal $I_1$, no load):\n\n$$v_x = -g_{m1}r_{o1}\\,v_{in}$$\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1}r_{o1}(1 + g_{m2}r_{o2}) \\approx -g_{m1}g_{m2}r_{o1}r_{o2}}$$\n\n### Output Resistance\nSetting $v_{in}=0$ (M₁ reduces to $r_{o1}$) and applying a test voltage:\n\n$$\\boxed{R_{out} = r_{o2} + r_{o1}(1 + g_{m2}r_{o2}) \\approx g_{m2}r_{o1}r_{o2}}$$\n\n### Effective Transconductance\n$$G_m = \\frac{g_{m1}(g_{m2}r_{o2}+1)}{g_{m2}r_{o2}+r_{o2}/r_{o1}+1} \\approx g_{m1}$$\n\nso that $A_v = -G_m \\cdot R_{out}$ is consistent.\n\n---\n\n## Key Advantages Over Simple Common-Source\n\n| Parameter | Common-Source | Cascode |\n|-----------|--------------|---------|\n| Gain | $-g_{m1}r_{o1}$ | $-g_{m1}g_{m2}r_{o1}r_{o2}$ |\n| $R_{out}$ | $r_{o1}$ | $g_{m2}r_{o1}r_{o2} \\gg r_{o1}$ |\n| Miller Cap on $C_{gd1}$ | $C_{gd1}(1+g_{m1}R_L)$ | $\\approx 2C_{gd1}$ (since $V_X$ barely swings) |\n\nThe cascode boosts voltage gain and output resistance by a factor of $\\approx g_{m2}r_{o2}$, while dramatically **reducing the Miller effect** on M₁'s gate-drain capacitance, thereby improving bandwidth.",
        "format": "markdown",
        "sha256": "5d1af076a8cab65a313b734dfff42b4fe3bcce0d9ca3d10f50bcfd8086ba6e99"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as the common-source NMOS and M₂ as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. The ancillary Miller-effect claim does not change the required analysis.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1447,
        "output_tokens": 18122,
        "total_tokens": 19569,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17083,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1447,
        "output_tokens": 18122,
        "total_tokens": 19569,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17083,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Cascode Amplifier Analysis\n\n## Circuit Topology Identification\n\nThis is a **cascode (telescopic) amplifier** consisting of:\n- **M₁**: Common-Source (CS) stage — gate driven by $v_{in}$, source at GND, drain at node X\n- **M₂**: Common-Gate (CG) stage — gate fixed at $V_{b1}$ (AC ground), source at X, drain at $v_{out}$\n- **I₁**: Ideal current-source load from $V_{DD}$\n\n---\n\n## DC Analysis\n\nSince M₁ and M₂ are **series-connected**, they carry the same quiescent current:\n$$I_{D1} = I_{D2} = I_1$$\n\n**Saturation conditions:**\n| Transistor | Requirement | Implication |\n|---|---|---|\n| M₁ | $V_{DS1} \\geq V_{ov1}$ | $V_X \\geq V_{ov1}$ |\n| M₂ | $V_{DS2} \\geq V_{ov2}$ | $V_{out} \\geq V_X + V_{ov2}$ |\n\nThe **minimum output voltage** is $V_{out,\\min} = V_{ov1} + V_{ov2}$ (two overdrive voltages).\n\n---\n\n## Small-Signal Analysis\n\nFor small signals: $V_{DD} \\to 0$, $V_{b1} \\to 0$, $I_1 \\to$ open circuit.\n\n**KCL at node X** *(currents leaving = 0)*:\n$$g_{m1}v_{in} + \\frac{v_X}{r_{o1}} + \\frac{v_X - v_{out}}{r_{o2}} + g_{m2}v_X = 0 \\tag{1}$$\n\n**KCL at $v_{out}$** *(ideal $I_1$ → zero AC current)*:\n$$\\frac{v_{out} - v_X}{r_{o2}} - g_{m2}v_X = 0 \\implies \\boxed{v_{out} = v_X(1 + g_{m2}r_{o2})} \\tag{2}$$\n\nSubstituting (2) into (1):\n$$g_{m1}v_{in} + \\frac{v_X}{r_{o1}} = 0 \\implies v_X = -g_{m1}r_{o1}\\,v_{in} \\tag{3}$$\n\n### Voltage Gain\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1}r_{o1}(1+g_{m2}r_{o2}) \\approx -g_{m1}g_{m2}r_{o1}r_{o2}}$$\n\n### Output Resistance\n\nSetting $v_{in}=0$ (M₁ reduces to $r_{o1}$) and applying $v_{test}$:\n\n$$\\boxed{R_{out} = r_{o1} + r_{o2}(1 + g_{m2}r_{o1}) \\approx g_{m2}r_{o1}r_{o2}}$$\n\n### Input Resistance\n\n$$R_{in} = \\infty \\quad \\text{(MOSFET gate draws no current)}$$\n\n---\n\n## Comparison with Single CS Stage\n\n| Parameter | CS Stage alone | Cascode |\n|-----------|---------------|---------|\n| $A_v$ | $-g_{m1}r_{o1}$ | $-g_{m1}g_{m2}r_{o1}r_{o2}$ |\n| $R_{out}$ | $r_{o1}$ | $g_{m2}r_{o1}r_{o2}$ |\n\nThe cascode **boosts gain and output resistance by a factor of $\\approx g_{m2}r_{o2}$**, while also reducing the Miller multiplication of $C_{gd1}$, improving bandwidth.",
        "format": "markdown",
        "sha256": "50b07d22ea0562d2af774b8b7bf0cf9a1f0b30b25d75c24fcc3ee088488660c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CS input device and CG cascode, and derives the ideal-load gain equivalent to the golden expression; omitting body effect is allowed. The output-resistance result is also consistent.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1447,
        "output_tokens": 28518,
        "total_tokens": 29965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27531,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1447,
        "output_tokens": 28518,
        "total_tokens": 29965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27531,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Cascode Structure Analysis\n\n## Identifying the Transistor Configurations\n\nLooking at the circuit, I'll analyze the role of each transistor:\n\n**M₁ (bottom, NMOS):**\n- Gate = V_in (signal input)\n- Source = GND\n- Drain connects to M₂'s source\n- → **Common-Source (CS) configuration**\n\n**M₂ (top, NMOS):**\n- Gate = V_b1 (fixed DC bias → AC ground)\n- Source connects to M₁'s drain\n- Drain connects to V_out / R_D\n- → **Common-Gate (CG) configuration**\n\n## Cascode Definition Check\n\nA cascode requires:\n| Requirement | This Circuit |\n|---|---|\n| CS stage: input at gate | M₁: V_in at gate ✓ |\n| CG stage: gate at fixed bias | M₂: gate at V_b1 ✓ |\n| CG stage: signal enters source | Signal from M₁'s drain enters M₂'s source ✓ |\n| Output at CG drain | V_out at M₂'s drain ✓ |\n\nThe small-signal controlling variable for M₂ is:\n$$v_{gs2} = V_{b1} - v_{s2} = -v_A$$\nwhich depends on the **intermediate node** (M₁'s drain), not the output — confirming proper common-gate operation.\n\n## Conclusion\n\n**Yes, this is a cascode structure** (specifically, an NMOS telescopic cascode):\n\n$$V_{in} \\xrightarrow{\\text{CS}(M_1)} v_A \\xrightarrow{\\text{CG}(M_2)} V_{out}$$\n\nThis topology provides high output resistance (~$g_{m2}r_{o2}r_{o1}$), high voltage gain ($A_v \\approx -g_{m1}R_D$), and significantly reduced Miller effect compared to a single common-source stage.",
        "format": "markdown",
        "sha256": "e471b41a0282cead988f43f696eaa628c947b12fd3191cdb303ed44ff290a7e5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower with its drain grounded, not a common-source stage, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1518,
        "output_tokens": 39269,
        "total_tokens": 40787,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38778,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1518,
        "output_tokens": 39269,
        "total_tokens": 40787,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38778,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis\n\n### Identifying Transistor Types\n\nExamining the MOSFET symbols in the figure:\n\n| Transistor | Arrow Direction | Type |\n|:----------:|:---------------:|:----:|\n| **M₁** (bottom) | Inward (toward channel) | **NMOS** |\n| **M₂** (top) | Outward (away from channel) | **PMOS** |\n\n### What a Cascode Requires\n\nA cascode amplifier needs:\n1. **M₁** in **common-source (CS)**: gate = V_in, source = GND ✓\n2. **M₂** in **common-gate (CG)**: gate at AC ground, **M₁'s drain → M₂'s SOURCE**, output at M₂'s drain\n\n### Why This Circuit Fails the Test\n\nFor **PMOS M₂**, the terminal assignment is dictated by potential:\n\n$$V_\\text{out} > V_X \\quad \\Longrightarrow \\quad \\text{Source}_{M_2} = V_\\text{out}\\;(\\text{top}),\\quad \\text{Drain}_{M_2} = V_X\\;(\\text{bottom})$$\n\nThis creates a **drain-to-drain** connection:\n\n$$\\underbrace{M_1\\;\\text{drain}}_{V_X} \\longrightarrow \\underbrace{M_2\\;\\text{drain}}_{V_X} \\quad \\neq \\quad M_1\\;\\text{drain} \\to M_2\\;\\textbf{source}$$\n\nThe signal from M₁ enters M₂ at its **drain** (not source), and the output V_out sits at M₂'s **source** — the opposite of common-gate behavior.\n\n### Conclusion\n\n> **No — the circuit is NOT a cascode structure.**\n\nA proper cascode would use an **NMOS M₂** with its *source* at $V_X$ (receiving M₁'s drain current) and its *drain* at $V_\\text{out}$, as shown below for comparison:\n\n$$V_{DD} \\xrightarrow{R_D} \\underbrace{V_\\text{out}}_{\\text{NMOS }M_2\\text{ drain}} \\xrightarrow{\\text{CG}} \\underbrace{V_X}_{M_2\\text{ source} = M_1\\text{ drain}} \\xrightarrow{\\text{CS}} \\text{GND}$$",
        "format": "markdown",
        "sha256": "c20f7034b308e57a5afc8235142bf9ebf7be4edcbe0a453d1ba0e9cc3e27d9c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The conclusion that it is not a cascode is correct, and the answer describes the general CS/CG cascode arrangement. However, it misidentifies both transistor types and terminal roles; the actual M1 is a PMOS source follower, which is the key reason the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1518,
        "output_tokens": 120766,
        "total_tokens": 122284,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 120155,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1518,
        "output_tokens": 120766,
        "total_tokens": 122284,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 120155,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Cascode Structure Analysis\n\n## Identifying the Configuration\n\nLooking at the circuit, I need to verify whether both transistors satisfy the cascode requirements:\n\n| Transistor | Gate | Source | Drain | Configuration |\n|-----------|------|--------|-------|--------------|\n| M₁ (bottom) | V_in | GND | → M₂ source | Common-Source (CS) |\n| M₂ (top) | V_b1 (bias) | ← M₁ drain | → V_out | Common-Gate (CG) |\n\n## Cascode Verification\n\n**Yes — this is a cascode structure.** The circuit meets all defining criteria:\n\n1. **Bottom transistor (M₁) in Common-Source (CS):**\n   - Signal input at gate: $V_{in}$\n   - Source tied to ground\n   - Acts as a transconductance stage converting $V_{in}$ to drain current\n\n2. **Top transistor (M₂) in Common-Gate (CG):**\n   - Gate biased at fixed $V_{b1}$ → AC ground\n   - Source receives signal current from M₁'s drain\n   - Drain delivers output to $V_{out}$ through $R_D$\n\n3. **Load resistor** $R_D$ connected from $V_{DD}$ to $V_{out}$ (M₂ drain)\n\n## Key Benefits of This Cascode\n\n$$R_{out} \\approx g_{m2}\\, r_{o2}\\, r_{o1} \\qquad \\text{(much higher than a single CS stage)}$$\n\n$$A_v \\approx -g_{m1}(R_D \\| R_{out}) \\approx -g_{m1} R_D$$\n\n- **Increased output impedance** (boosted by factor $\\sim g_m r_o$)\n- **Reduced Miller effect** on M₁ (M₁'s drain is a low-impedance node)\n- **Improved bandwidth** compared to a single-stage CS amplifier",
        "format": "markdown",
        "sha256": "f12e37db06db0421499ee78686c0673f1598cb29637b6c53755c56db69805812"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and treats M₁ as a common-source device; M₁ is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1518,
        "output_tokens": 61635,
        "total_tokens": 63153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 61147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1518,
        "output_tokens": 61635,
        "total_tokens": 63153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 61147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Miller Effect in a Cascode\n\n### Review: The Miller Effect\n\nFor an inverting amplifier with voltage gain $A_v$ and a feedback capacitance $C_{gd}$ between drain and gate, the **effective input capacitance** is:\n\n$$C_{Miller} = C_{gd}(1 + |A_v|)$$\n\nFor a simple common-source stage with load $R_D$: $A_v = -g_m R_D$, so $C_{Miller}$ can be very large.\n\n---\n\n### Why the Cascode Suppresses It\n\nIn a cascode, the **common-source (CS) input transistor M₁** does not drive a high-impedance load directly. Instead, its drain connects to the **source of a common-gate (CG) transistor M₂**.\n\nThe critical point: the **input impedance looking into the source of M₂** is approximately $1/g_{m2}$ — a **low impedance**.\n\nTherefore, the **local voltage gain of M₁** (across its own $C_{gd1}$) is:\n\n$$|A_{v1}| = g_{m1} \\cdot \\frac{1}{g_{m2}} \\approx 1 \\quad \\text{(when } g_{m1} \\approx g_{m2}\\text{)}$$\n\nThe resulting Miller capacitance is:\n\n$$C_{Miller} = C_{gd1}(1 + |A_{v1}|) \\approx 2\\,C_{gd1}$$\n\ncompared to $C_{gd1}(1 + g_m R_D)$ — which can be **10× or more** larger — for a simple CS stage.\n\n---\n\n### Physical Intuition\n\nSince M₂ presents a low-impedance load, **the drain of M₁ is a low-swing node** — it barely moves. With little voltage variation across $C_{gd1}$, negligible displacement current flows back to the input gate, so the feedback effect is almost eliminated.\n\n---\n\n### Where Does the Gain Go?\n\nThe overall gain $g_{m1}R_D$ is not lost — it is now produced by the **common-gate stage M₂**, which delivers high voltage swing at the output. Crucially, M₂'s $C_{gd2}$ connects between its **AC-grounded gate** and the output, acting merely as an output load capacitance with **no Miller multiplication**.\n\n| Stage | Gain | Miller Effect on $C_g$ |\n|-------|------|----------------------|\n| Simple CS | $-g_m R_D$ | Severe |\n| CS in cascode (M₁) | $\\approx -1$ | Minimal |\n| CG in cascode (M₂) | $\\approx -g_m R_D$ | None (gate grounded) |\n\nThis is the primary reason cascode amplifiers achieve superior high-frequency bandwidth.",
        "format": "markdown",
        "sha256": "c1a3fab18983c0fd730d1e38fb68fb16c13452a40559b2f74ab6bea3029475bb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the low-impedance cascode node and derives a local gain near −1, giving about 2Cgd rather than large common-source Miller multiplication. However, it then incorrectly says the drain barely moves and the voltage variation across Cgd is little, overstating the suppression; the voltage across Cgd is about twice the input swing, so the effect is reduced, not almost eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2213,
        "total_tokens": 2234,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1513,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2213,
        "total_tokens": 2234,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1513,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Miller Effect Review\n\nThe Miller effect multiplies a feedback capacitance $C_{gd}$ (or $C_\\mu$) at the input by:\n\n$$C_{Miller} = C_{gd}(1 + |A_v|)$$\n\nThe larger the voltage gain of the stage, the greater the input capacitance and the lower the bandwidth.\n\n---\n\n## Cascode Structure\n\nIn a cascode, **M1 (common-source)** drives the input of **M2 (common-gate)**, whose input impedance is approximately $1/g_{m2}$ — a **very low value**.\n\n### Gain of the First Stage (M1)\n\nThe voltage gain seen by M1's drain is not the full load $R_D$, but rather the input impedance of the common-gate stage:\n\n$$A_{v1} = -g_{m1} \\cdot \\frac{1}{g_{m2}} \\approx -1 \\quad \\text{(if } g_{m1} \\approx g_{m2}\\text{)}$$\n\nTherefore the Miller capacitance at M1's gate is only:\n\n$$C_{Miller} = C_{gd1}(1 + 1) = 2C_{gd1}$$\n\ninstead of $C_{gd}(1 + g_m R_D)$, which could be **10–100× larger** in a simple common-source stage.\n\n### The Common-Gate Stage (M2)\n\nThe gate of M2 is at **AC ground**, so $C_{gd2}$ connects the output only to ground — it is **not a feedback path** and causes no Miller multiplication at the input.\n\n---\n\n## Summary\n\n| Stage | Effective gain | Miller multiplication |\n|-------|---------------|----------------------|\n| Simple CS | $-g_m R_D \\gg 1$ | $(1 + g_m R_D) \\gg 1$ |\n| CS in cascode | $\\approx -1$ | $\\approx 2$ |\n| CG in cascode | N/A | None (gate = AC ground) |\n\nThe cascode essentially **isolates** the high-gain output node ($V_{out}$) from the sensitive input node, keeping $A_{v1} \\approx -1$ and thus suppressing the Miller multiplication to its minimum possible value.",
        "format": "markdown",
        "sha256": "0c21e38772b1612abd894d208594d79fceb58a0d2232a3ffc0ac200c506a2941"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance node at M1’s drain and the resulting gain of about −1 across Cgd1, giving roughly a 2× Miller multiplier rather than the full-stage gain. Omitting gmb2 is a minor approximation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 1831,
        "total_tokens": 1852,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1277,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 1831,
        "total_tokens": 1852,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1277,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Miller Effect Review\n\nThe Miller effect multiplies a feedback capacitance $C_{gd}$ by the gain across it:\n\n$$C_{\\text{Miller}} = C_{gd}(1 + |A_v|)$$\n\n---\n\n## Why Cascode Suppresses It\n\n### Simple Common-Source (reference case)\n\nThe drain of M1 drives a large load resistance $R_D$, giving:\n$$A_{v1} = -g_{m1}R_D \\quad \\Longrightarrow \\quad C_{\\text{Miller}} = C_{gd1}(1 + g_{m1}R_D)$$\n\nFor $g_m R_D = 20$, the input capacitance is **21×** $C_{gd1}$.\n\n---\n\n### Cascode Configuration\n\nIn a cascode, M1 (common-source) has its drain loaded by **the source of M2 (common-gate)**, whose input impedance looking into its source is approximately $\\approx 1/g_{m2}$.\n\nThe local voltage gain seen by $C_{gd1}$ is therefore:\n\n$$\\boxed{A_{v1} \\approx -g_{m1} \\cdot \\frac{1}{g_{m2}} \\approx -1}$$\n\n(assuming matched devices with $g_{m1} \\approx g_{m2}$)\n\nSo the Miller capacitance collapses to:\n\n$$C_{\\text{Miller}} = C_{gd1}(1 + 1) = 2C_{gd1}$$\n\n---\n\n## Physical Intuition\n\n| Node | Simple CS | Cascode |\n|------|-----------|---------|\n| M1 drain voltage swing | Large (= $A_v \\cdot v_{in}$) | **Small** (≈ $-v_{in}$) |\n| Charge pumped through $C_{gd1}$ | Large → large apparent $C$ | Small → small apparent $C$ |\n\nThe common-gate transistor M2 **clamps** the drain of M1 to a low-impedance node. Even though signal current flows freely, the **voltage** at M1's drain barely moves. With little voltage swing across $C_{gd1}$, the Miller multiplication is nearly eliminated.\n\nThe full voltage gain is still achieved — it develops across the high-impedance load at M2's **drain** — but that node is not fed back to the input through any unsuppressed capacitance.",
        "format": "markdown",
        "sha256": "7e0613eae932e87aaf95569bf51db7d38ad1bdafdf4e75ec790490eb285f937f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance M2 source node and derives a local gain near −1, giving about 2Cgd rather than full-stage Miller multiplication. Calling the effect nearly eliminated slightly overstates the reduction, but the answer’s quantitative result is correct and the golden solution treats this as a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2665,
        "total_tokens": 2686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2665,
        "total_tokens": 2686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Source Amplifier with PMOS Current Source Load\n\n## Circuit Topology Identification\n\n| Transistor | Type | Source | Gate | Drain | Role |\n|-----------|------|--------|------|-------|------|\n| M₁ | PMOS | V_DD | V_b2 (fixed) | V_out | Current-source load |\n| M₂ | NMOS | V_b1 (AC gnd) | V_in (signal) | V_out | Amplifying device |\n\n---\n\n## DC Bias Conditions (Both Transistors in Saturation)\n\n$$I_{D1} = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{DD} - V_{b2} - |V_{tp}|)^2$$\n\n$$I_{D2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{in,DC} - V_{b1} - V_{tn})^2$$\n\nAt the operating point: $I_{D1} = I_{D2} = I_D$\n\n---\n\n## Small-Signal Analysis\n\nSince V_b2, V_b1, and V_DD are all **AC grounds**:\n\n- For M₁: $v_{gs1} = 0$ → controlled source contributes **zero** current; only $r_{ds1}$ remains\n- For M₂: $v_{gs2} = v_{in}$ → driven by input signal\n\n**KCL at V_out node:**\n$$\\frac{v_{out}}{r_{ds1}} + \\frac{v_{out}}{r_{ds2}} + g_{m2}\\,v_{in} = 0$$\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m2}(r_{ds1} \\| r_{ds2})}$$\n\n---\n\n## Key Performance Metrics\n\n| Parameter | Expression |\n|-----------|-----------|\n| **Voltage Gain** | $A_v = -g_{m2}(r_{ds1} \\| r_{ds2})$ |\n| **Output Resistance** | $R_{out} = r_{ds1} \\| r_{ds2}$ |\n| **Input Resistance** | $R_{in} \\to \\infty$ |\n\nwhere:\n$$g_{m2} = \\sqrt{2\\mu_n C_{ox}\\!\\left(\\tfrac{W}{L}\\right)_2 I_D}, \\quad r_{ds} = \\frac{1}{\\lambda I_D}$$\n\n---\n\n## Key Observations\n\n1. **Signal inversion**: The negative gain is characteristic of common-source topology.\n2. **High gain**: Both $r_{ds1}$ and $r_{ds2}$ are large, yielding $|A_v| \\gg 1$.\n3. **High input impedance**: Only the gate capacitance of M₂ limits high-frequency performance.\n4. **Role of biases**: V_b2 sets the quiescent current via M₁; V_b1 establishes the DC source potential of M₂.",
        "format": "markdown",
        "sha256": "d4a1ccc88d772fe19ab34c598ed0f767b7fd0d17d0e54eb6b08cb6940c08bc7d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M₂’s gate and misidentifies the circuit as common-source. The actual circuit is common-gate with Vin at M₂’s source, giving non-inverting gain and low input resistance.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1331,
        "output_tokens": 8992,
        "total_tokens": 10323,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1331,
        "output_tokens": 8992,
        "total_tokens": 10323,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Common-Source Amplifier with PMOS Current Source Load\n\n## Circuit Identification\n\n| Transistor | Type | Source | Gate | Drain | Role |\n|------------|------|--------|------|-------|------|\n| M₁ | PMOS | V_DD | V_b2 (fixed) | V_out | Current-source load |\n| M₂ | NMOS | V_b1 (fixed) | V_in | V_out | Amplifying device |\n\n**M₂ is in a common-source configuration** (source at AC ground via fixed V_b1), and **M₁ acts as a high-impedance current-source load** (gate and source both at AC ground in small-signal).\n\n---\n\n## DC Analysis (Saturation Conditions)\n\n**M₁ (PMOS)** in saturation requires:\n$$V_{SG1} = V_{DD} - V_{b2} > |V_{TP}| \\quad \\text{and} \\quad V_{out} < V_{b2} + |V_{TP}|$$\n\n**M₂ (NMOS)** in saturation requires:\n$$V_{GS2} = V_{in} - V_{b1} > V_{TN} \\quad \\text{and} \\quad V_{out} > V_{in} - V_{TN}$$\n\nThe quiescent current is set by V_b2: $\\;I_D = \\frac{\\mu_p C_{ox}}{2}\\left(\\frac{W}{L}\\right)_1(V_{DD}-V_{b2}-|V_{TP}|)^2$\n\n---\n\n## Small-Signal Analysis\n\nSetting all DC sources to AC ground and applying KCL at V_out:\n\n$$g_{m2}\\,v_{in} + \\frac{v_{out}}{r_{o2}} + \\frac{v_{out}}{r_{o1}} = 0$$\n\n### Voltage Gain\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m2}(r_{o1} \\| r_{o2})}$$\n\nThe **negative sign** confirms 180° phase inversion, characteristic of common-source topology.\n\n### Output Resistance\n$$R_{out} = r_{o1} \\| r_{o2}$$\n\n### Input Resistance\n$$R_{in} = \\infty \\quad \\text{(MOSFET gate)}$$\n\n---\n\n## Key Advantage Over Resistor Load\n\n| Load Type | Voltage Gain |\n|-----------|-------------|\n| Resistor R_D | $\\|A_v\\| = g_{m2}\\,R_D$ |\n| Current source (M₁) | $\\|A_v\\| = g_{m2}(r_{o1}\\|r_{o2}) \\gg g_{m2}R_D$ |\n\nSince $r_{o1}, r_{o2} \\gg R_D$, the current-source load dramatically increases the voltage gain, making this topology ubiquitous in analog CMOS design.",
        "format": "markdown",
        "sha256": "b593c777337b03288eb910f97ce8196aedd4c77eeda573e73badf7c686cafe49"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies the stage as common-source. The actual circuit is common-gate, with Vin at M2’s source, so its gain is non-inverting and its input resistance is low.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1331,
        "output_tokens": 8283,
        "total_tokens": 9614,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7534,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1331,
        "output_tokens": 8283,
        "total_tokens": 9614,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7534,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: CMOS Common-Source Amplifier\n\n## Circuit Identification\n\n| Component | Type | Configuration |\n|-----------|------|---------------|\n| M₁ | PMOS | Current-source load (gate biased at V_b2, source at V_DD) |\n| M₂ | NMOS | Common-source amplifying transistor (input at gate) |\n| V_b1 | DC bias | Source bias of M₂; bypass capacitor → AC ground |\n\nThe output V_out is taken at the **shared drain node** of M₁ and M₂.\n\n---\n\n## DC Operating Point\n\nFor both transistors in **saturation**:\n\n$$I_{D1} = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1(V_{DD} - V_{b2} - |V_{TP}|)^2$$\n\n$$I_{D2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2(V_{in} - V_{b1} - V_{TN})^2$$\n\n**Equilibrium condition:** $I_{D1} = I_{D2}$\n\n---\n\n## Small-Signal (AC) Analysis\n\nSetting V_DD, V_b2, V_b1 → AC ground (bypass cap shorts M₂'s source):\n\n$$v_{gs1} = 0 \\implies \\text{M}_1 \\text{ acts as current source with resistance } r_{o1}$$\n$$v_{gs2} = v_{in} \\implies \\text{M}_2 \\text{ drives current } g_{m2}\\,v_{in}$$\n\n**KCL at output node:**\n\n$$g_{m2}\\,v_{in} + \\frac{v_{out}}{r_{o1}} + \\frac{v_{out}}{r_{o2}} = 0$$\n\n---\n\n## Key Results\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m2}(r_{o1} \\| r_{o2})}$$\n\n$$R_{out} = r_{o1} \\| r_{o2}$$\n\n$$R_{in} \\to \\infty$$\n\n---\n\n## Signal Flow & Design Insight\n\n```\nV_in ↑  →  v_gs2 ↑  →  I_D2 ↑  →  V_out ↓   (inverting amplifier ✓)\n```\n\nThe high gain arises because M₁ (current source) presents **large output resistance** $r_{o1}$, unlike a resistive load. This is the fundamental advantage of CMOS current-source loading in analog IC design.",
        "format": "markdown",
        "sha256": "9665e6ed8ad0dcb897269bfc360bfe0bbdcd0e63b93c52ddedb2313830a7c8f0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer puts Vin at M2’s gate and analyzes a common-source stage, but the circuit is common-gate with Vin at M2’s source. This reverses the gain polarity and incorrectly gives infinite input resistance; the golden solution explicitly assigns 0 for placing Vin at the gate.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1331,
        "output_tokens": 8921,
        "total_tokens": 10252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8254,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1331,
        "output_tokens": 8921,
        "total_tokens": 10252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8254,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Counting Poles in the Two-Transistor Circuit\n\n## Identifying Independent Nodes\n\nTo determine the number of poles, I need to identify every **independent (non-reference) node** in the small-signal equivalent circuit.\n\n| Node | Location | Connected Capacitors |\n|------|----------|----------------------|\n| **Node A** | Gate of M₁ (after R_S) | C_GS (to GND), C_GD (to Node B) |\n| **Node B** (V_out) | Drain of M₁ / source of M₂ | C_DB (to GND), C_GD (from Node A) |\n| **Node C** | Drain of M₂ (top terminal) | C_GD2 (gate of M₂ at AC-GND → Node C), C_DB2 (Node C → V_DD = AC-GND) |\n\n## Capacitor Assignments\n\n$$\\underbrace{C_{GS}}_{\\text{Node A→GND}}, \\quad \\underbrace{C_{GD}}_{\\text{Node A→Node B}}, \\quad \\underbrace{C_{DB}}_{\\text{Node B→GND}}, \\quad \\underbrace{C_{GD2}}_{\\text{Node C→GND}}, \\quad \\underbrace{C_{DB2}}_{\\text{Node C→GND}}$$\n\n- C_GD2 bridges AC-ground (gate of M₂, fixed bias) → Node C\n- C_DB2 bridges Node C → V_DD (AC-ground, n-well bulk)\n\n## Transfer Function Order\n\nWriting KCL at all three nodes yields a **3rd-order polynomial** in the denominator of $V_\\text{out}/V_\\text{in}$:\n\n$$H(s) = \\frac{V_\\text{out}}{V_\\text{in}} = \\frac{N(s)}{1 + a_1 s + a_2 s^2 + a_3 s^3}$$\n\n## Result\n\n$$\\boxed{3 \\text{ poles}}$$\n\nThe three poles correspond to the three independent nodes:\n1. **Input pole** (Node A): governed by $R_S \\cdot (C_{GS} + C_{GD}(1+|A_v|))$  \n2. **Output pole** (Node B): governed by $R_{out} \\cdot C_{DB}$  \n3. **Internal pole** (Node C): governed by $(C_{GD2} + C_{DB2})$ and the channel resistance of M₂",
        "format": "markdown",
        "sha256": "bc7ded1dba794d236f74bfab171c51b9fe0a25f66eb2ecba483a9a3d4ba887ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives three poles by inventing a separate drain node for M2. In the shown circuit, M2’s gate and source are AC-grounded, and its drain is the output node, so the circuit has two independent capacitive nodes. The answer identifies some relevant M1 capacitances, but its pole count and topology are wrong.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1570,
        "output_tokens": 52936,
        "total_tokens": 54506,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 52305,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1570,
        "output_tokens": 52936,
        "total_tokens": 54506,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 52305,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the Circuit Topology\n\n**Transistors:**\n- **M₁ (NMOS):** Common-source amplifier with gate driven through R_S\n- **M₂ (PMOS):** Current-source load with gate and source tied to AC ground (bias and V_DD respectively)\n\n## Identifying the Internal Nodes (AC Analysis)\n\nFor AC analysis, V_DD and all bias nodes are AC ground. This yields **two internal nodes**:\n\n| Node | Description |\n|------|-------------|\n| **Node 1 (V_G₁)** | Gate of M₁, after R_S |\n| **Node 2 (V_out)** | Drain of M₁ = Drain of M₂ |\n\n## Mapping All Five Capacitors to Nodes\n\n| Capacitor | Connection | Contributes to |\n|-----------|-----------|----------------|\n| C_GS | Node 1 → Ground | Node 1 |\n| C_GD | Node 1 → Node 2 | Bridges both nodes |\n| C_DB | Node 2 → Ground | Node 2 |\n| C_GD2 | Gate M₂ (AC gnd) → Node 2 | Node 2 |\n| C_DB2 | Node 2 → Body M₂ (AC gnd) | Node 2 |\n\n> **Key insight:** C_DB, C_GD2, and C_DB2 are all in parallel between Node 2 and AC ground → they combine into a single $C_{out} = C_{DB}+C_{GD2}+C_{DB2}$.\n\n## Counting Independent State Variables\n\nThe KCL equations at the two nodes yield a **2nd-order system**:\n\n$$\\frac{V_{in}}{R_S} = V_{G_1}\\!\\left(\\frac{1}{R_S}+sC_{GS}+sC_{GD}\\right) - sC_{GD}V_{out}$$\n\n$$(g_m + sC_{GD})\\,V_{G_1} + V_{out}\\!\\left(\\frac{1}{r_o}+sC_{out}+sC_{GD}\\right)=0$$\n\nThe denominator of $V_{out}/V_{in}$ is a **degree-2 polynomial** in $s$.\n\n## Result\n\n$$\\boxed{2 \\text{ poles}}$$",
        "format": "markdown",
        "sha256": "4a7bb3aa0ee5f0923e6b29ad8566529426cb520d4609c583795804fff2217d71"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent dynamic nodes—the M1 gate and the output—and assigns the capacitances to them correctly, giving two poles. The supplementary output KCL appears to have a Cgd sign slip, but it does not affect the requested pole count.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1570,
        "output_tokens": 16805,
        "total_tokens": 18375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16219,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1570,
        "output_tokens": 16805,
        "total_tokens": 18375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16219,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the Poles of the Cascode Circuit\n\n### Circuit Topology\n\nThe circuit is a **cascode amplifier** consisting of:\n- **M₁** (NMOS): common-source stage with source resistance R_S\n- **M₂** (PMOS): common-gate stage\n- Three parasitic capacitors for M₁: C_GS, C_GD, C_DB\n- Two parasitic capacitors for M₂: C_GD2, C_DB2\n\n### Identifying the Signal Nodes\n\nThe circuit has **three independent signal nodes**:\n\n| Node | Description | Capacitors Present |\n|------|-------------|-------------------|\n| **A** | Gate of M₁ (after R_S) | C_GS (to GND), C_GD (to node B) |\n| **B** | Drain of M₁ = Source of M₂ (intermediate) | C_DB (to GND) |\n| **C** | Drain of M₂ = V_out | C_GD2 (to AC GND), C_DB2 (to AC GND) |\n\n> **Note:** Since M₂'s gate is at AC ground, C_GD2 and C_DB2 both connect node C to AC ground (they appear in parallel at the output node).\n\n### Counting Independent Energy Storage Elements\n\nUsing the capacitor graph method with **4 nodes** (including AC ground node \"0\") and **5 edges**:\n\n$$\\text{Independent capacitor-only loops} = e - n + 1 = 5 - 4 + 1 = 2$$\n\n$$\\text{Independent capacitors} = e - \\text{loops} = 5 - 2 = \\boxed{3}$$\n\nEquivalently: *Independent caps = (number of signal nodes) = n − 1 = 4 − 1 = 3* ✓\n\n### The Three Poles\n\nEach signal node contributes one pole:\n\n$$\\omega_{p1} \\approx \\frac{1}{R_S\\bigl[C_{GS}+C_{GD}(1+g_{m1}R_{out})\\bigr]} \\quad \\text{(input node A)}$$\n\n$$\\omega_{p2} \\approx \\frac{1}{R_B \\cdot C_{DB}} \\quad \\text{(intermediate node B)}$$\n\n$$\\omega_{p3} \\approx \\frac{1}{R_{out}(C_{GD2}+C_{DB2})} \\quad \\text{(output node C)}$$\n\n### Answer\n\n$$\\boxed{3 \\text{ poles}}$$",
        "format": "markdown",
        "sha256": "89ae3a8250d23b8e3e096b9ae49a7e99ea33de6904b046c16b877401ad42c099"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is not a cascode: M1's drain and M2's drain share the output, so there is no intermediate node. The answer invents a third node and concludes three poles instead of the two poles associated with the M1 gate and output.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1570,
        "output_tokens": 64967,
        "total_tokens": 66537,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 64330,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1570,
        "output_tokens": 64967,
        "total_tokens": 66537,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 64330,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Cascode NMOS Amplifier\n\n## Circuit Topology\n\nThe circuit consists of:\n- **M₁** (bottom, NMOS): gate = V_in, source = GND, drain = node X\n- **M₂** (top, NMOS): gate = V_in, source = X, drain = V_out\n- **R_D**: connects V_DD to V_out\n\nBoth transistors share the same gate input V_in, forming a **cascode (stacked) amplifier**.\n\n---\n\n## Small-Signal Voltage Gain (ignoring r_o)\n\nLet $v_x$ = small-signal voltage at node X.\n\n**KCL at node X:**\n\n$$i_{D1} = i_{D2}$$\n\n$$g_{m1}v_{in} = g_{m2}(v_{in} - v_x) \\implies v_x = v_{in}\\!\\left(1 - \\frac{g_{m1}}{g_{m2}}\\right)$$\n\n**KCL at V_out:**\n\n$$i_{D2} = g_{m2}(v_{in} - v_x) = g_{m2}\\cdot\\frac{g_{m1}}{g_{m2}}\\,v_{in} = g_{m1}v_{in}$$\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1}R_D}$$\n\n> **Key insight:** The output current equals $g_{m1}v_{in}$ regardless of $g_{m2}$. M₂ does not affect the transconductance — it is set entirely by M₁.\n\n---\n\n## Output Resistance\n\nSetting $v_{in} = 0$, M₁ becomes a small-signal resistor $r_{o1}$ to ground, and M₂ has $v_{gs2} = -v_x$. Applying a test voltage $v_t$ at V_out:\n\n| Parameter | Expression |\n|-----------|-----------|\n| M₁ equivalent | $r_{o1}$ (from X to GND) |\n| M₂ condition | $v_{gs2} = -v_x$ (cascode action) |\n\nSolving KCL at X and V_out:\n\n$$\\boxed{R_{out} = r_{o2}\\bigl(1 + g_{m2}r_{o1}\\bigr) + r_{o1} \\approx g_{m2}\\,r_{o1}\\,r_{o2}}$$\n\nThis is the **standard cascode output resistance** — much larger than a single transistor's $r_o$.\n\n---\n\n## Complete Voltage Gain (with r_o)\n\n$$A_v = -g_{m1}\\bigl(R_D \\,\\|\\, R_{out}\\bigr) = -g_{m1}\\!\\left(R_D \\,\\Big\\|\\, g_{m2}r_{o1}r_{o2}\\right)$$\n\nSince typically $R_D \\ll g_{m2}r_{o1}r_{o2}$:\n\n$$A_v \\approx -g_{m1}R_D$$\n\n---\n\n## Summary\n\n| Property | Result |\n|----------|--------|\n| Voltage Gain | $A_v = -g_{m1}\\,(R_D \\| g_{m2}r_{o1}r_{o2})$ |\n| Transconductance | $G_m = g_{m1}$ (M₁ only) |\n| Output Resistance | $R_{out} \\approx g_{m2}\\,r_{o1}\\,r_{o2}$ |\n| Input Resistance | $R_{in} = \\infty$ |\n\n**Benefit of the cascode:** While the gain with a passive $R_D$ load is only $-g_{m1}R_D$, replacing $R_D$ with a high-impedance active load can achieve a maximum gain of $A_{v,\\max} \\approx -\\frac{1}{2}g_m(g_mr_o^2) = -\\frac{1}{2}g_m^2r_o^2$, far exceeding a single common-source stage.",
        "format": "markdown",
        "sha256": "ce5202a6295a64adb2b7df17e4497de645bb435b338a609ded8567b0836dfafa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It treats the common-gate-drive series NMOS pair as a true cascode and derives cascode gain and output resistance. It misses the key operating condition—M1 is in triode—and the central result that the pair behaves approximately like one transistor with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 26442,
        "total_tokens": 27966,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 26442,
        "total_tokens": 27966,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: Stacked NMOS with Common Gate Drive\n\n## Circuit Topology Identification\n\n| Node | Connection |\n|------|-----------|\n| M₁ gate | V_in |\n| M₁ source | GND |\n| M₁ drain / M₂ source | V_X (internal node) |\n| M₂ gate | **V_in** (same as M₁) |\n| M₂ drain | V_out |\n| R_D | V_DD → V_out |\n\nBoth gates share the **same input signal** — this is a *self-biased cascode*.\n\n---\n\n## DC Analysis (λ = 0)\n\nSince both transistors carry the same bias current $I_D$:\n\n$$I_D = \\frac{K_1}{2}(V_{in}-V_{TH})^2 = \\frac{K_2}{2}(V_{in}-V_X-V_{TH})^2$$\n\n$$\\boxed{V_{out} = V_{DD} - I_D R_D}$$\n\nThe node $V_X$ is set by equating the two drain current expressions.\n\n---\n\n## Small-Signal Analysis\n\nUsing $i_d = g_m v_{gs} + v_{ds}/r_o$ and writing KCL at each node:\n\n**KCL at V_X:**\n$$g_{m2}(v_{in}-v_x) + \\frac{v_{out}-v_x}{r_{o2}} = g_{m1}v_{in} + \\frac{v_x}{r_{o1}} \\tag{1}$$\n\n**KCL at V_out:**\n$$\\frac{v_{out}}{R_D} + g_{m2}(v_{in}-v_x) + \\frac{v_{out}-v_x}{r_{o2}} = 0 \\tag{2}$$\n\nSubstituting (1) into (2):\n$$\\frac{v_{out}}{R_D} + g_{m1}v_{in} + \\frac{v_x}{r_{o1}} = 0 \\tag{3}$$\n\n### Voltage Gain (r_o → ∞)\n\nFrom (1): $\\displaystyle v_x = v_{in}\\!\\left(1 - \\frac{g_{m1}}{g_{m2}}\\right)$\n\nFrom (3): $v_{out} = -g_{m1} R_D\\, v_{in}$\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1} R_D}$$\n\n> **Key insight:** The effective transconductance is $G_m = g_{m1}$, set entirely by M₁. M₂ passes the current unchanged (for large $r_o$).\n\n---\n\n## Output Resistance\n\nSetting $v_{in} = 0$: M₂'s gate = 0, source = $v_x$ → standard common-gate configuration:\n\n$$R_{out,\\text{stack}} = r_{o2} + r_{o1}(1 + g_{m2}\\,r_{o2}) \\approx g_{m2}\\,r_{o1}\\,r_{o2}$$\n\n$$\\boxed{R_{out} = R_D \\;\\|\\; g_{m2}\\,r_{o1}\\,r_{o2}}$$\n\n---\n\n## Complete Gain (finite r_o)\n\n$$A_v = -g_{m1}\\!\\left(R_D \\;\\Big\\|\\; g_{m2}\\,r_{o1}\\,r_{o2}\\right)$$\n\nFor $g_{m2}\\,r_{o1}\\,r_{o2} \\gg R_D$: $\\quad A_v \\approx -g_{m1} R_D$\n\n---\n\n## Summary\n\n| Parameter | Result |\n|-----------|--------|\n| Voltage Gain | $-g_{m1}(R_D \\| g_{m2}r_{o1}r_{o2})$ |\n| Effective $G_m$ | $g_{m1}$ |\n| Output Resistance | $g_{m2}\\,r_{o1}\\,r_{o2}$ (cascode-enhanced) |\n| Input Resistance | $\\infty$ (MOS gates) |\n\nThe circuit provides the **same gain as a single CS stage** ($-g_{m1}R_D$), but achieves a **cascode-level output impedance** ($\\approx g_{m2}r_{o1}r_{o2}$) without requiring a separate bias voltage for M₂.",
        "format": "markdown",
        "sha256": "41907b722c97e85926d2e19aafb525932c33300ffb22adb309c48ecc1af667d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It identifies the shared-gate series NMOS topology but analyzes it as a true cascode, treating the lower device as saturated and claiming cascode-level output resistance. The essential result—that the lower device is in triode and the pair acts approximately as one transistor with a longer effective channel—is missed.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 36071,
        "total_tokens": 37595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34945,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 36071,
        "total_tokens": 37595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34945,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: Dual-Gate Stacked NMOS Amplifier\n\n## Circuit Topology\n\n| Node/Element | Connection |\n|---|---|\n| **M₁** (bottom NMOS) | Gate → V_in, Source → GND |\n| **M₂** (top NMOS) | Gate → V_in, Source → node X (= M₁ drain), Drain → V_out |\n| **R_D** | V_DD to V_out |\n\nBoth transistors share the same gate input — this is a **self-biased cascode** configuration.\n\n---\n\n## DC Analysis\n\nFor both transistors in saturation, the same drain current $I_D$ flows through the series stack:\n\n$$I_D = \\frac{k_{n1}}{2}(V_{in} - V_{TH})^2 \\quad \\Rightarrow \\quad V_X = V_{in} - V_{TH} - \\sqrt{\\frac{2I_D}{k_{n2}}}$$\n\n$$\\boxed{V_{out} = V_{DD} - I_D R_D}$$\n\n---\n\n## Small-Signal Analysis\n\nUsing parameters $(g_{m1}, r_{o1})$ for M₁ and $(g_{m2}, r_{o2})$ for M₂.\n\n### KCL at Internal Node X\n\nSetting drain currents equal (series constraint):\n\n$$g_{m1}\\, v_{in} = g_{m2}(v_{in} - v_x)$$\n\n$$\\boxed{v_x = v_{in}\\left(1 - \\frac{g_{m1}}{g_{m2}}\\right)}$$\n\nFor **matched transistors** ($g_{m1} = g_{m2} = g_m$): $\\;v_x = 0$ — node X is an **AC virtual ground**.\n\n### Effective Short-Circuit Transconductance\n\nSolving with $v_{out} = 0$ gives:\n\n$$G_m = \\frac{i_d}{v_{in}}\\bigg|_{v_{out}=0} = g_{m1}$$\n\n> The transconductance is set solely by **M₁**, independent of M₂'s size.\n\n### Voltage Gain\n\nSince $v_x = 0$ for matched devices:\n\n$$i_{d2} = g_m \\cdot v_{in} \\quad \\Rightarrow \\quad v_{out} = -g_m v_{in} R_D$$\n\n$$\\boxed{A_v = -g_{m1} R_D}$$\n\n### Output Resistance\n\nSetting $v_{in} = 0$ (both gates at AC ground) reduces the circuit to a **standard cascode**:\n\n$$R_{out} = r_{o2} + r_{o1} + g_{m2}\\, r_{o1}\\, r_{o2} \\approx \\underbrace{g_{m2}\\, r_{o1}\\, r_{o2}}_{\\gg R_D}$$\n\nFor matched devices: $\\;R_{out} \\approx g_m r_o^2$\n\n---\n\n## Performance Summary\n\n| Parameter | Simple CS | Standard Cascode | **This Circuit** |\n|---|---|---|---|\n| $G_m$ | $g_m$ | $g_m$ | $g_{m1}$ |\n| $R_{out}$ | $r_o$ | $g_m r_o^2$ | $g_m r_o^2$ |\n| $A_v$ (with $R_D$) | $-g_m(r_o\\|R_D)$ | $\\approx -g_m R_D$ | $\\approx -g_{m1} R_D$ |\n\n---\n\n## Key Conclusions\n\n1. **Gain**: $A_v \\approx -g_{m1} R_D$ — identical to a standard cascode with the same load\n2. **High $R_{out} = g_m r_o^2$** suppresses finite-$r_o$ degradation of gain\n3. **No separate bias needed** for M₂'s gate (simplifies biasing vs. standard cascode)\n4. The AC virtual ground at node X ($v_x = 0$) causes M₂ to operate as a common-gate stage, delivering full cascode output resistance",
        "format": "markdown",
        "sha256": "5743ccc51af6cc72899eff197be0acddd08e62044282ba9a6214078d383ad0a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats both devices as saturated in a true cascode and claims a cascode-level output resistance. In the actual circuit, M1 is in triode and the series pair behaves approximately like one NMOS with an effective channel length of L1 + L2; the central mechanism and conclusion are missed.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 59206,
        "total_tokens": 60730,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 58159,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 59206,
        "total_tokens": 60730,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 58159,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: NMOS Differential Pair\n\n## Circuit Identification\n\nThis circuit is an **NMOS differential pair with single-ended output**, where:\n- **M₁** (input transistor): gate = V_in, drain → V_DD directly\n- **M₂** (output transistor): gate = V_b (bias), drain drives V_out through R_D\n- **I₁**: tail current source (shared between M₁ and M₂)\n\nIt can equivalently be viewed as a **source follower (M₁) cascading into a common-gate stage (M₂)**.\n\n---\n\n## DC Operating Point\n\nAssuming matched transistors and V_in = V_b for symmetric bias:\n\n$$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n\n$$V_S = V_b - V_{GS2} = V_b - V_{TH} - V_{OV}$$\n\n$$\\boxed{V_{out} = V_{DD} - \\frac{I_1}{2}\\cdot R_D}$$\n\n**Saturation conditions:**\n| Transistor | Condition |\n|-----------|-----------|\n| M₁ | $V_{DD} \\geq V_{in} - V_{TH}$ (always satisfied) |\n| M₂ | $V_{out} \\geq V_S + V_{OV}$ |\n\n---\n\n## Small-Signal Analysis\n\n### KCL at Common Source Node v_s\n\nWith an ideal tail current source (zero small-signal current), currents from M₁ and M₂ must sum to zero:\n\n$$g_{m1}(v_{in} - v_s) + g_{m2}(0 - v_s) = 0$$\n\n$$\\Rightarrow \\quad v_s = \\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in}$$\n\n### Output Voltage\n\nThe small-signal drain current of M₂: $\\;i_{d2} = -g_{m2}\\,v_s$\n\n$$v_{out} = -i_{d2}\\cdot R_D = g_{m2}\\,v_s\\,R_D$$\n\n### Voltage Gain\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}\\,g_{m2}\\,R_D}{g_{m1}+g_{m2}}}$$\n\nFor matched transistors ($g_{m1}=g_{m2}=g_m$):\n\n$$\\boxed{A_v = \\frac{g_m R_D}{2} \\quad \\textbf{(non-inverting, positive gain)}}$$\n\n---\n\n## Signal Flow & Physical Interpretation\n\n$$v_{in}\\uparrow \\;\\xrightarrow{\\text{M}_1\\text{ source follower}}\\; v_s = \\tfrac{v_{in}}{2}\\uparrow \\;\\xrightarrow{V_{GS2}=V_b-v_s\\downarrow}\\; I_{D2}\\downarrow \\;\\xrightarrow{R_D}\\; V_{out}\\uparrow$$\n\n| Stage | Gain |\n|-------|------|\n| M₁ source follower | $A_{sf} = \\dfrac{g_{m1}}{g_{m1}+g_{m2}} = \\dfrac{1}{2}$ |\n| M₂ common-gate | $A_{cg} = g_{m2}\\,R_D$ |\n| **Total** | $A_v = \\dfrac{g_m R_D}{2}$ |\n\n---\n\n## Impedances\n\n$$R_{in} = \\infty \\quad \\text{(MOSFET gate)}$$\n\n$$R_{out} = R_D \\,\\|\\, r_{o2} \\;\\approx\\; R_D \\quad \\text{(for } r_{o2} \\gg R_D\\text{)}$$",
        "format": "markdown",
        "sha256": "6696d5e4f010cdc9b649774a1ffda615e514d0171ff1ae428d24cc515620fe39"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair (equivalently, M1 as a source follower driving M2 as a common-gate stage) and gives the correct non-inverting small-signal gain. The golden solution makes this identification sufficient for full credit.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1549,
        "output_tokens": 20199,
        "total_tokens": 21748,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19217,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1549,
        "output_tokens": 20199,
        "total_tokens": 21748,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19217,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Differential Pair Amplifier Analysis\n\n## Circuit Identification\n\nThis circuit is an **NMOS differential pair with single-ended output**, consisting of:\n- **M₁, M₂**: NMOS transistors with a shared source node\n- **I₁**: Tail current source (sets total bias current)\n- **R_D**: Drain load resistor on M₂\n- **V_in** → gate of M₁ (signal input); **V_b** → gate of M₂ (fixed reference)\n- **V_out** taken at M₂'s drain\n\n---\n\n## DC Analysis\n\nAssuming both transistors operate in **saturation**:\n\n$$I_{D1} + I_{D2} = I_1$$\n\nAt the quiescent point ($V_{in} = V_b$, matched transistors):\n\n$$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n\n$$\\boxed{V_{out,DC} = V_{DD} - \\frac{I_1}{2}R_D}$$\n\n---\n\n## Small-Signal Analysis\n\n**KCL at the common source node** (ideal $I_1$ → AC open circuit):\n\n$$i_{d1} + i_{d2} = 0$$\n$$g_{m1}(v_{in} - v_s) + g_{m2}(0 - v_s) = 0$$\n\nSolving for the source voltage:\n\n$$v_s = \\frac{g_{m1}}{g_{m1} + g_{m2}}\\,v_{in}$$\n\nThe drain current of M₂:\n\n$$i_{d2} = -g_{m2}\\,v_s = \\frac{-g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,v_{in}$$\n\nOutput voltage:\n\n$$v_{out} = -i_{d2}\\,R_D = \\frac{g_{m1}\\,g_{m2}\\,R_D}{g_{m1}+g_{m2}}\\,v_{in}$$\n\n---\n\n## Key Results\n\n| Parameter | Expression | Matched Case ($g_{m1}=g_{m2}=g_m$) |\n|-----------|-----------|--------------------------------------|\n| **Voltage Gain** | $A_v = \\dfrac{g_{m1}\\,g_{m2}\\,R_D}{g_{m1}+g_{m2}}$ | $A_v = \\dfrac{g_m R_D}{2}$ |\n| **Output Resistance** | $R_{out} = R_D \\| r_{o2}$ | $R_{out} = R_D \\| r_{o2}$ |\n| **Input Resistance** | $R_{in} \\to \\infty$ | $R_{in} \\to \\infty$ |\n\n---\n\n## Physical Interpretation\n\n$$V_{in}\\uparrow \\;\\Rightarrow\\; I_{D1}\\uparrow \\;\\Rightarrow\\; I_{D2}\\downarrow \\;\\Rightarrow\\; V_{out} = V_{DD} - I_{D2}R_D\\;\\uparrow$$\n\nThe gain is **positive (non-inverting)**. The tail current source I₁ provides high **common-mode rejection**, making this the standard building block for op-amp input stages.",
        "format": "markdown",
        "sha256": "0da16cd5244a723048ee078433aa697e929ba6cb31c2055574f342d838883273"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair with M2’s gate at Vb and output at its drain. The small-signal gain and non-inverting signal direction are also correct.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1549,
        "output_tokens": 15536,
        "total_tokens": 17085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14721,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1549,
        "output_tokens": 15536,
        "total_tokens": 17085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14721,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: Differential Pair with Single-Ended Output\n\n## Circuit Topology\n\nThis circuit is a **differential pair with single-ended output**, where:\n- **M₁** (input transistor): Gate = V_in, Drain → V_DD, Source → common node\n- **M₂** (reference transistor): Gate = V_b (DC bias), Drain = V_out, Source → common node\n- **I₁**: Tail current source (sets total bias current)\n- **R_D**: Load resistor at M₂'s drain only\n\nEquivalently, this can be viewed as a **source follower (M₁) cascaded with a common-gate amplifier (M₂)**.\n\n---\n\n## DC Operating Point\n\nAssuming V_in = V_b (balanced condition) and identical transistors:\n\n$$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n\n$$V_S = V_b - V_{GS} = V_b - V_{TH} - \\sqrt{\\frac{I_1}{k_n}}$$\n\n$$\\boxed{V_{out} = V_{DD} - \\frac{I_1}{2} R_D}$$\n\n---\n\n## Small-Signal Analysis\n\nSince I₁ is an ideal current source (infinite impedance): $\\;i_{d1} + i_{d2} = 0$\n\n**KCL at the tail node:**\n\n| Equation | Expression |\n|----------|------------|\n| $i_{d1} = g_{m1}(v_{in} - v_s)$ | M₁ drain current |\n| $i_{d2} = -g_{m2}\\, v_s$ | M₂ drain current (v_b = 0 for AC) |\n\nSetting $i_{d1} + i_{d2} = 0$:\n$$v_s = \\frac{g_{m1}}{g_{m1}+g_{m2}}\\, v_{in}$$\n\n**Output voltage:**\n$$v_{out} = -i_{d2}\\cdot R_D = \\frac{g_{m1}\\, g_{m2}}{g_{m1}+g_{m2}}\\cdot R_D \\cdot v_{in}$$\n\n### Voltage Gain\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}\\,g_{m2}}{g_{m1}+g_{m2}}\\cdot R_D \\xrightarrow{g_{m1}=g_{m2}=g_m} \\frac{g_m R_D}{2}}$$\n\n> **Phase: Non-inverting (positive gain)** — when V_in ↑, I_D1 ↑, I_D2 ↓ (since I₁ is constant), so V_out ↑.\n\n---\n\n## Impedances\n\n| Parameter | Value |\n|-----------|-------|\n| Input resistance | $R_{in} \\to \\infty$ (MOS gate) |\n| Output resistance | $R_{out} \\approx R_D$ |\n\n---\n\n## Physical Intuition\n\nThe factor of **½** (vs. a simple common-source stage with gain $g_m R_D$) arises because M₁ as a source follower delivers only half the input signal to M₂'s source node, which M₂ then amplifies in common-gate fashion through $R_D$.",
        "format": "markdown",
        "sha256": "9362afbf5591686ffe1bf0a60d6220152eaa07e1120e1de754faed3ed61ee00a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as both a source follower driving a common-gate stage and a source-coupled differential pair, and gives the correct non-inverting gain and signal-path explanation.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1549,
        "output_tokens": 12824,
        "total_tokens": 14373,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1549,
        "output_tokens": 12824,
        "total_tokens": 14373,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Output Impedance Analysis: Why It Can Be Inductive\n\n## Circuit Description\n\n**M1** operates as a source follower (common-drain), with its gate driven through $R_S$ from $V_{in}$ and its source at $V_{out}$. **M2** acts as a current-source bias (common-gate with fixed $V_b$), contributing $r_{o2}$ in parallel at the output.\n\n## Small-Signal Analysis\n\nSetting $V_{in} = 0$ for impedance analysis connects M1's gate to AC ground through $R_S$. Apply test voltage $v_x$ at $V_{out}$.\n\n**Step 1 — Gate voltage** (Cgs1–RS high-pass divider):\n$$v_{g1} = v_x \\cdot \\frac{j\\omega C_{gs1}R_S}{1 + j\\omega C_{gs1}R_S}$$\n\n**Step 2 — Gate-source voltage:**\n$$v_{gs1} = v_{g1} - v_x = \\frac{-v_x}{1 + j\\omega C_{gs1}R_S}$$\n\n**Step 3 — Output impedance** (via KCL at $v_x$):\n\n$$\\boxed{Z_{out} \\approx \\frac{1 + j\\omega C_{gs1}R_S}{g_{m1} + j\\omega C_{gs1}}}$$\n\nThis has a **zero** at $\\omega_z = 1/(C_{gs1}R_S)$ and a **pole** at $\\omega_p = g_{m1}/C_{gs1}$. Since $R_S \\gg 1/g_{m1}$, we have $\\omega_z \\ll \\omega_p$.\n\n## Frequency Behavior\n\n| Frequency Range | Approximation | Character |\n|---|---|---|\n| $\\omega \\ll \\omega_z$ | $Z_{out} \\approx 1/g_{m1}$ | Resistive (low) |\n| $\\omega_z \\ll \\omega \\ll \\omega_p$ | $Z_{out} \\approx j\\omega\\underbrace{\\dfrac{C_{gs1}R_S}{g_{m1}}}_{L_{\\text{eff}}}$ | **Inductive (+90°)** |\n| $\\omega \\gg \\omega_p$ | $Z_{out} \\approx R_S$ | Resistive (high) |\n\n## Physical Explanation\n\nThe source follower M1 normally provides low, resistive output impedance via **negative feedback**: when $V_{out}$ rises, $v_{gs1} = -v_{out}$ decreases, reducing the channel current and pulling $V_{out}$ back down.\n\nThe $R_S$–$C_{gs1}$ network is a **high-pass filter** from $V_{out}$ to the gate. As frequency increases above $\\omega_z$:\n\n1. The gate starts to follow $V_{out}$ through $C_{gs1}$, reducing the feedback strength.\n2. Crucially, the high-pass RC phase shift causes the corrective gm-current to **lead** $v_x$ by ~90° in the intermediate band.\n3. By KCL, the external test current $i_x$ must **lag** $v_x$ by 90° to compensate.\n\n$$i_x = \\frac{v_x}{Z_{out}} = \\frac{v_x}{j\\omega L_{\\text{eff}}} \\quad \\Rightarrow \\quad \\angle(i_x) - \\angle(v_x) = -90°$$\n\n**Current lagging voltage by 90° is the definitive signature of inductive impedance.**\n\nThe effective inductance:\n$$L_{\\text{eff}} = \\frac{R_S \\cdot C_{gs1}}{g_{m1}}$$\n\ncan be on the order of **nanohenries**, making this \"active inductor\" useful for on-chip LC resonators in RF circuits.",
        "format": "markdown",
        "sha256": "96a0c50411f37713b0a62a6a6cde3e0aeef57b0e5b20e369318271a95ef41a5d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output-impedance expression and explains the low-to-high-frequency transition from about 1/gm1 to RS. With RS much greater than 1/gm1, the zero precedes the pole and the intermediate impedance is inductive. The approximate inductance is valid under that stated assumption; the M2 terminology is a minor, nonessential issue.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1597,
        "output_tokens": 44538,
        "total_tokens": 46135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 43560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1597,
        "output_tokens": 44538,
        "total_tokens": 46135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 43560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Why the Source Follower Output Impedance Can Be Inductive\n\n### Circuit Configuration\n\nM1 operates as a **source follower** (common-drain), with its gate driven through R_S, and M2 acts as a tail **current source** biased by V_b. The output is taken at the common source/drain node.\n\n---\n\n### Small-Signal Output Impedance Analysis\n\nSetting V_in = 0 and applying a test voltage $v_x$ at the output:\n\n**Step 1 – Gate Voltage of M1 (via KCL at the gate node):**\n\nThe gate is coupled to the output through $C_{gs1}$, and to AC ground through $R_S$:\n\n$$\\frac{v_{g1}}{R_S} + sC_{gs1}(v_{g1} - v_x) = 0$$\n\n$$\\boxed{v_{g1} = \\frac{sC_{gs1}R_S}{1 + sC_{gs1}R_S}\\,v_x}$$\n\n**Step 2 – Gate-Source Voltage:**\n\n$$v_{gs1} = v_{g1} - v_x = \\frac{-1}{1 + sC_{gs1}R_S}\\,v_x$$\n\n> Key observation: at DC, $v_{gs1} = -v_x$ (full feedback); as $\\omega \\to \\infty$, $v_{gs1} \\to 0$ (feedback is killed by $C_{gs1}$).\n\n**Step 3 – Output Impedance (ignoring $r_{o1}, r_{o2}$ for clarity):**\n\nCollecting all currents leaving the output node $(v_x/r_{o2},\\ g_{m1}v_{gs1},\\ C_{gs1}$-path):\n\n$$Z_\\text{out} \\approx \\frac{1 + sC_{gs1}R_S}{g_{m1} + sC_{gs1}} \\bigg\\| r_{o2}$$\n\n---\n\n### Why the Impedance Is Inductive\n\nSubstituting $s = j\\omega$ and separating real and imaginary parts:\n\n$$\\operatorname{Im}[Z_\\text{out}] = \\frac{\\omega\\, C_{gs1}(g_{m1}R_S - 1)}{g_{m1}^2 + \\omega^2 C_{gs1}^2}$$\n\n| Condition | Result |\n|-----------|--------|\n| $g_{m1}R_S > 1$ | $\\operatorname{Im}[Z_\\text{out}] > 0$ → **Inductive** |\n| $g_{m1}R_S < 1$ | $\\operatorname{Im}[Z_\\text{out}] < 0$ → Capacitive |\n\nSince typically $g_{m1}R_S \\gg 1$ (e.g., $g_m = 10\\ \\text{mA/V},\\ R_S = 1\\ \\text{k}\\Omega$), the condition is easily met.\n\n---\n\n### Equivalent Circuit (Low-to-Mid Frequencies, $\\omega \\ll \\omega_T = g_{m1}/C_{gs1}$)\n\nExpanding $Z_\\text{out}$ in a Taylor series:\n\n$$Z_\\text{out} \\approx \\underbrace{\\frac{1}{g_{m1}}}_{R_\\text{eff}} + s\\underbrace{\\frac{C_{gs1}R_S}{g_{m1}}}_{L_\\text{eff}}$$\n\nThis is a **series R–L** impedance with effective inductance:\n\n$$\\boxed{L_\\text{eff} = \\frac{C_{gs1}R_S}{g_{m1}} = \\frac{R_S}{\\omega_T}}$$\n\n---\n\n### Physical Intuition\n\n| Frequency | $v_{gs1}$ | Effective $g_m$ | $Z_\\text{out}$ | Character |\n|-----------|-----------|-----------------|-----------------|-----------|\n| $\\omega \\to 0$ | $\\approx -v_x$ | Full $g_{m1}$ | $\\approx 1/g_{m1}$ | Resistive (small) |\n| $\\omega \\sim 1/(C_{gs1}R_S)$ | Phase-shifted | Reduced | Rising with $\\omega$ | **Inductive** |\n| $\\omega \\to \\infty$ | $\\to 0$ | $\\to 0$ | $\\approx R_S$ | Resistive (large) |\n\nThe $C_{gs1}$–$R_S$ network **delays** the gate's response to output variations. As frequency increases, the gate can no longer track the source, the negative $g_m$ feedback is progressively turned off, and the impedance **rises with frequency**—the defining signature of inductive behavior.",
        "format": "markdown",
        "sha256": "e6ba868864f5d85d2552b4d2721e7342ede895e084fc2385a81ba15e3894b986"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the source-follower output impedance and captures the low-frequency 1/gm-to-high-frequency RS transition and inductive condition gmRS > 1. The approximate inductance omits a small term, and one sentence about gate tracking is imprecise, but the equations and stated limits give the correct mechanism.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1597,
        "output_tokens": 21987,
        "total_tokens": 23584,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1597,
        "output_tokens": 21987,
        "total_tokens": 23584,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Inductive Output Impedance of the Source Follower Stage\n\n## Circuit Topology\n\n- **M₁**: Source follower (common-drain), with gate driven through Rₛ from Vᵢₙ, drain at V_DD, source at V_out\n- **M₂**: Current-source load (common-gate), with gate fixed at V_b\n\n## Small-Signal Output Impedance Analysis\n\nTo find Z_out, set Vᵢₙ = 0, apply test voltage $v_x$ at the output, and find the resulting test current $i_x$.\n\n### Step 1 — Gate Voltage of M₁\n\nWith Vᵢₙ = 0, the gate of M₁ sees $R_S$ to AC ground and $C_{gs1}$ to the output node $v_x$. By the voltage divider:\n\n$$v_g = v_x \\cdot \\frac{sR_SC_{gs1}}{1 + sR_SC_{gs1}}$$\n\n### Step 2 — Gate-Source Voltage\n\n$$v_{gs1} = v_g - v_x = \\frac{-v_x}{1 + sR_SC_{gs1}}$$\n\n### Step 3 — Output Impedance\n\nApplying KCL at $v_x$ (neglecting $r_{o1}$, $r_{o2}$ for clarity):\n\n$$i_x = g_{m1}|v_{gs1}| = \\frac{g_{m1}\\,v_x}{1 + sR_SC_{gs1}}$$\n\n$$\\boxed{Z_{out} = \\frac{v_x}{i_x} = \\frac{1 + sR_SC_{gs1}}{g_{m1}} = \\underbrace{\\frac{1}{g_{m1}}}_{R} + s\\underbrace{\\frac{R_SC_{gs1}}{g_{m1}}}_{L}}$$\n\nThis is a **series R–L impedance** with:\n\n| Component | Value |\n|-----------|-------|\n| Resistance | $R = 1/g_{m1}$ |\n| Inductance | $L = R_S C_{gs1}/g_{m1}$ |\n\n## Physical Mechanism\n\nThe inductive behavior arises from a **frequency-dependent weakening of M₁'s negative feedback**:\n\n| Frequency | $C_{gs1}$ | Feedback action | Impedance |\n|-----------|-----------|-----------------|-----------|\n| Low | Open | Full: gate fixed at ground, $v_{gs1} = -v_x$ → strong corrective current | Low ≈ $1/g_m$ |\n| High | Short | Weak: gate tracks $v_x$, $v_{gs1} → 0$ → no corrective current | High ≈ $\\infty$ |\n\nThe $R_S$–$C_{gs1}$ network introduces a **time delay** (time constant $\\tau = R_S C_{gs1}$) in M₁'s corrective current response. Because the **current lags the voltage** by this delay — exactly the defining property of an inductor — the output impedance rises with frequency and exhibits a positive phase angle, i.e., it is **inductive**.\n\n$$\\text{Im}\\{Z_{out}\\} = \\frac{\\omega R_S C_{gs1}}{g_{m1}} > 0 \\quad \\Longrightarrow \\quad \\text{inductive}$$",
        "format": "markdown",
        "sha256": "a4e75ecb81282a2d699c369ddd142435c39868179d84fcc44fa1951f06156f91"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer identifies the source follower and the role of the RS–Cgs1 network, but omits the capacitor current in the output-current calculation. This gives an incorrect impedance that grows without bound, rather than tending to RS, and misses that inductive behavior requires RS > 1/gm1.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1597,
        "output_tokens": 19320,
        "total_tokens": 20917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18469,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1597,
        "output_tokens": 19320,
        "total_tokens": 20917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18469,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis\n\n## Circuit Identification\n\nThe circuit contains:\n- **M₁** (NMOS): Common-source stage — gate at node *X*, drain at *V*_out, source at GND\n- **M₂** (NMOS): Feedback transistor — gate at *V*_out, drain at node *X*, source at GND\n- **R**_D1: Drain load from *V*_DD to *V*_out\n- **I**_in: Input current source at node *X*\n\n> **Key insight:** Since M₁'s gate draws zero current, **all of** *I*_in must flow through M₂ by KCL at node *X*.\n\n---\n\n## DC Operating Point\n\nFrom KCL at node *X* (no gate current into M₁):\n$$I_{in} = I_{D2} = \\frac{1}{2}k_{n2}\\left(V_{out} - V_{TH2}\\right)^2$$\n\nSolving for the output voltage:\n$$\\boxed{V_{out} = V_{TH2} + \\sqrt{\\frac{2\\,I_{in}}{k_{n2}}}}$$\n\nThe voltage at node *X* follows from KCL at *V*_out:\n$$I_{D1} = \\frac{V_{DD}-V_{out}}{R_{D1}} \\implies V_X = V_{TH1}+\\sqrt{\\frac{2\\,I_{D1}}{k_{n1}}}$$\n\n---\n\n## Small-Signal Analysis\n\nDefine $R_D = R_{D1}\\!\\parallel\\! r_{o1}$.\n\n| Node | KCL Equation |\n|------|-------------|\n| $V_{out}$ | $\\dfrac{-v_{out}}{R_{D1}} - g_{m1}v_x - \\dfrac{v_{out}}{r_{o1}}=0$ → $v_{out}=-g_{m1}R_D\\,v_x$ &nbsp;&nbsp;**(1)** |\n| $X$ | $i_{in} = g_{m2}\\,v_{out}+\\dfrac{v_x}{r_{o2}}$ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;**(2)** |\n\nSubstituting **(1)** → **(2)**:\n\n$$i_{in} = v_{out}\\!\\left(g_{m2} - \\frac{1}{g_{m1}R_D\\,r_{o2}}\\right)$$\n\n### Transimpedance\n\n$$\\boxed{\\frac{v_{out}}{i_{in}} = \\frac{1}{\\displaystyle g_{m2} - \\frac{1}{g_{m1}(R_{D1}\\!\\parallel\\! r_{o1})\\,r_{o2}}} \\;\\approx\\; \\frac{1}{g_{m2}}}$$\n\nvalid when $g_{m1}g_{m2}(R_{D1}\\!\\parallel\\! r_{o1})r_{o2}\\gg 1$.\n\n---\n\n## Impedances and Feedback Summary\n\n**Input impedance at X** ($v_x/i_{in}$):\n$$Z_{in} \\approx \\frac{-1}{g_{m1}\\,g_{m2}(R_{D1}\\!\\parallel\\! r_{o1})}$$\n\n**Output impedance** (set $i_{in}=0$, then $v_x = -g_{m2}r_{o2}\\,v_{out}$):\n$$Z_{out} \\approx \\frac{-1}{g_{m1}\\,g_{m2}\\,r_{o2}}$$\n\n| Quantity | Approximate Value |\n|----------|------------------|\n| Transimpedance $v_{out}/i_{in}$ | $1/g_{m2}$ |\n| Input impedance $Z_{in}$ | $-1/[g_{m1}g_{m2}(R_{D1}\\!\\parallel\\!r_{o1})]$ |\n| Output impedance $Z_{out}$ | $-1/[g_{m1}g_{m2}\\,r_{o2}]$ |\n| Loop gain | $g_{m1}g_{m2}(R_{D1}\\!\\parallel\\!r_{o1})\\,r_{o2}\\gg 1$ |\n\n**Both impedances are negative**, which is the signature of **positive feedback** (the two cascaded CS stages each contribute a sign inversion, giving overall non-inverting feedback). The well-defined transimpedance $1/g_{m2}$ arises because the input current is forced entirely through M₂, whose gate voltage ($V_{out}$) must adjust accordingly.",
        "format": "markdown",
        "sha256": "6a74d5f942075e525f3d7e99285c21e1946fb51957ff051473d8c917a53c0ebe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies M2’s gate connection to Vout, the positive-feedback loop, and the resulting negative input impedance, satisfying the golden solution’s full-credit rule. Its claims of a well-defined transimpedance and a DC operating point understate the instability, but do not negate those required points.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1559,
        "output_tokens": 55756,
        "total_tokens": 57315,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 54552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1559,
        "output_tokens": 55756,
        "total_tokens": 57315,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 54552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis\n\n## Circuit Identification\n\nThe circuit is a **current-to-voltage (transresistance) amplifier** with:\n- **M₁ (NMOS):** Common-source stage — gate at X, drain at V_out, source at GND\n- **M₂ (NMOS):** Feedback transistor — gate at V_out, drain at X, source at GND  \n- **I_in:** Input current source at node X\n\n---\n\n## DC Operating Point Analysis\n\nApplying KCL at node X (M₁'s gate draws no current):\n\n$$\\boxed{I_{in} = I_{D2} = \\frac{1}{2}K_{n2}(V_{out} - V_{th})^2}$$\n\nSolving for the output voltage:\n\n$$V_{out} = V_{th} + \\sqrt{\\frac{2I_{in}}{K_{n2}}}$$\n\nThe remaining bias quantities follow as:\n\n$$I_{D1} = \\frac{V_{DD} - V_{out}}{R_{D1}}, \\qquad V_X = V_{th} + \\sqrt{\\frac{2I_{D1}}{K_{n1}}}$$\n\n---\n\n## Small-Signal Analysis\n\nUsing KCL at both nodes with the small-signal model:\n\n**Node X:**\n$$i_{in} = g_{m2}\\,v_{out} + \\frac{v_x}{r_{o2}} \\tag{1}$$\n\n**Node V_out:**\n$$v_{out}\\!\\left(\\frac{1}{R_{D1}} + \\frac{1}{r_{o1}}\\right) + g_{m1}v_x = 0 \\implies v_x = -\\frac{v_{out}}{g_{m1}(R_{D1} \\| r_{o1})} \\tag{2}$$\n\nSubstituting (2) into (1):\n\n$$\\boxed{\\frac{v_{out}}{i_{in}} = \\frac{1}{g_{m2} - \\dfrac{1}{g_{m1}\\,r_{o2}(R_{D1}\\|r_{o1})}}}$$\n\nFor ideal transistors ($r_o \\to \\infty$), this simplifies to:\n\n$$\\frac{v_{out}}{i_{in}} = \\frac{1}{g_{m2}}$$\n\nThe voltage at node X becomes:\n\n$$v_x = -\\frac{v_{out}}{g_{m1}R_{D1}} = -\\frac{i_{in}}{g_{m1}\\,g_{m2}\\,R_{D1}}$$\n\n---\n\n## Key Results Summary\n\n| Quantity | Expression | Ideal ($r_o \\to \\infty$) |\n|---------|-----------|--------------------------|\n| Transresistance | $\\dfrac{1}{g_{m2} - \\frac{1}{g_{m1}r_{o2}(R_{D1}\\|r_{o1})}}$ | $\\dfrac{1}{g_{m2}}$ |\n| Input resistance at X | $v_x/i_{in}$ | $-\\dfrac{1}{g_{m1}g_{m2}R_{D1}}$ |\n| M₁ voltage gain | $v_{out}/v_x$ | $-g_{m1}R_{D1}$ |\n\n---\n\n## Discussion\n\nThe circuit forces **I_D2 = I_in** at node X, so V_out adjusts to satisfy this KCL constraint regardless of the load — analogous to a diode-connected transistor but realized through the feedback loop. The **negative input resistance** ($-1/g_{m1}g_{m2}R_{D1}$) reveals that the M₁–M₂ loop constitutes **positive feedback** with loop gain $T = g_{m1}g_{m2}r_{o2}(R_{D1}\\|r_{o1})$, which slightly boosts the transresistance above $1/g_{m2}$.",
        "format": "markdown",
        "sha256": "6bf85c5d535d18e90eca8db58d57c2ebd2eefe0ff2a50536c1e720bb5a3baf61"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer correctly places M2’s gate at Vout, identifies the positive-feedback loop, and gives negative input resistance as a consequence. It overstates linear amplifier operation and omits the instability/latching behavior, but the golden solution’s full-credit rule is satisfied.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1559,
        "output_tokens": 46675,
        "total_tokens": 48234,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 45699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1559,
        "output_tokens": 46675,
        "total_tokens": 48234,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 45699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis\n\n## Circuit Identification\n\nThe circuit contains:\n- **M₁ (NMOS, common-source):** gate = node X, drain = V_out, source = GND\n- **M₂ (NMOS, feedback):** gate = V_out, drain = node X, source = GND\n- **R_D1:** drain load from V_DD to V_out\n- **I_in:** current source (GND → node X)\n\nThe feedback path runs: V_out → M₂ gate → M₂ drain (node X) → M₁ gate → V_out\n\n---\n\n## DC Analysis\n\n**Key observation:** Since M₁'s gate draws no current, all input current must flow through M₂:\n$$\\boxed{I_{D2} = I_{in}}$$\n\nWith M₂ in saturation ($V_{GS2} = V_{out}$):\n$$I_{in} = \\tfrac{1}{2}k_{n2}(V_{out} - V_{th})^2 \\implies V_{out} = V_{th} + \\sqrt{\\frac{2I_{in}}{k_{n2}}}$$\n\nThe voltage at node X is determined by M₁:\n$$V_X = V_{th} + \\sqrt{\\frac{2(V_{DD} - V_{out})}{k_{n1}R_{D1}}}$$\n\n---\n\n## Small-Signal Analysis\n\nApplying the small-signal model ($g_m$, $r_o$ for each transistor):\n\n**KCL at node X:**\n$$i_{in} = g_{m2}\\,v_{out} + \\frac{v_x}{r_{o2}} \\tag{1}$$\n\n**KCL at V_out** (noting $v_{gs1} = v_x$):\n$$-\\frac{v_{out}}{R_{D1}} = g_{m1}v_x + \\frac{v_{out}}{r_{o1}} \\implies \\boxed{v_{out} = -g_{m1}(R_{D1}\\|r_{o1})\\,v_x} \\tag{2}$$\n\nSubstituting (2) into (1):\n\n$$i_{in} = v_{out}\\!\\left[g_{m2} - \\frac{1}{g_{m1}\\,r_{o2}(R_{D1}\\|r_{o1})}\\right]$$\n\n---\n\n## Results\n\n### Transresistance\n$$\\frac{v_{out}}{i_{in}} = \\frac{1}{g_{m2} - \\dfrac{1}{g_{m1}r_{o2}(R_{D1}\\|r_{o1})}}$$\n\nFor $g_{m1}g_{m2}r_{o2}(R_{D1}\\|r_{o1}) \\gg 1$:\n\n$$\\boxed{\\frac{v_{out}}{i_{in}} \\approx \\frac{1}{g_{m2}}}$$\n\n### Input Resistance at Node X\n$$R_{in} = \\frac{v_x}{i_{in}} \\approx \\frac{-1}{g_{m1}\\,g_{m2}(R_{D1}\\|r_{o1})}$$\n\n### Output Resistance  \nSetting $i_{in} = 0$: from (1), $v_x = -g_{m2}r_{o2}\\,v_{out}$\n\n$$R_{out} \\approx \\frac{-1}{g_{m1}\\,g_{m2}\\,r_{o2}}$$\n\n---\n\n## Physical Interpretation\n\n| Parameter | Value |\n|-----------|-------|\n| $V_{out,DC}$ | $V_{th} + \\sqrt{2I_{in}/k_{n2}}$ |\n| $v_{out}/i_{in}$ | $\\approx 1/g_{m2}$ |\n| $R_{in}$ | $\\approx -1/[g_{m1}g_{m2}(R_{D1}\\|r_{o1})]$ (small) |\n| $R_{out}$ | $\\approx -1/(g_{m1}g_{m2}r_{o2})$ (small) |\n\nThe transresistance $1/g_{m2}$ arises directly from the constraint $I_{in} = I_{D2}$: since M₁'s gate is an open circuit, all of $I_{in}$ flows through M₂, forcing $V_{out}$ to satisfy M₂'s saturation equation. Node X approaches a **virtual ground** ($v_x \\to 0$) for large loop gain, making this circuit a **current-controlled voltage source** with gain set by M₂'s transconductance.",
        "format": "markdown",
        "sha256": "40e2bde0657e0bed3802207c7edc2df087d1e9943e7ee26c696ed8d9513e6d0d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies M2’s gate connection to Vout, the positive-feedback loop, and the resulting negative input resistance, satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1559,
        "output_tokens": 92331,
        "total_tokens": 93890,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 91178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1559,
        "output_tokens": 92331,
        "total_tokens": 93890,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 91178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Two-Stage Transimpedance Amplifier Analysis\n\n## Circuit Topology Identification\n\nThis is a **two-stage transimpedance amplifier (TIA)** with **shunt-shunt negative feedback** via R_F.\n\n| Element | Configuration | Role |\n|---------|--------------|------|\n| M₁ + R_D1 | Common-gate (gate = V_b ≈ AC gnd) | Stage 1: low Z_in, I→V |\n| M₂ + R_D2 | Common-source (source = GND) | Stage 2: voltage gain |\n| R_F | Shunt-shunt feedback | V_out → input current |\n| I_in | Current source | Signal input |\n\n---\n\n## Small-Signal Analysis (r_o → ∞)\n\n**KCL at Node X** (gate of M₂ draws no current):\n\n$$\\frac{v_X}{R_{D1}} = g_{m1} v_{in} \\implies \\boxed{v_X = g_{m1}R_{D1}\\,v_{in}}$$\n\n> Stage 1 provides **non-inverting** gain: common-gate does not invert.\n\n**KCL at V_out** (M₂ drain current + R_D2 + R_F):\n\n$$\\frac{v_{out}}{R_{D2}} + \\frac{v_{out}-v_{in}}{R_F} + g_{m2}v_X = 0$$\n\n$$\\implies v_{out}\\!\\left(\\frac{1}{R_{D2}}+\\frac{1}{R_F}\\right) = v_{in}\\!\\left(\\frac{1}{R_F} - g_{m1}g_{m2}R_{D1}\\right)$$\n\n**Open-loop voltage gain** (for $g_{m1}g_{m2}R_{D1} \\gg 1/R_F$):\n\n$$A_v \\approx -g_{m1}g_{m2}R_{D1}\\cdot\\frac{R_{D2}R_F}{R_{D2}+R_F} \\quad \\text{(inverting)}$$\n\n**KCL at input node:**\n\n$$i_{in} = g_{m1}v_{in} + \\frac{v_{in}-v_{out}}{R_F}$$\n\n---\n\n## Closed-Loop Performance\n\nSolving the three node equations simultaneously:\n\n$$\\boxed{Z_T = \\frac{v_{out}}{i_{in}} = \\frac{A_v R_F}{1 + g_{m1}R_F - A_v} \\;\\xrightarrow{|A_v|\\gg1}\\; -R_F}$$\n\nThe shunt-shunt feedback creates a **virtual ground** at the input ($v_{in}\\approx 0$), yielding:\n\n$$v_{out} \\approx -R_F \\cdot i_{in}$$\n\n### Key Parameters (High Loop Gain)\n\n| Metric | Exact | High-gain limit |\n|--------|-------|----------------|\n| **Transimpedance** | $Z_T = \\dfrac{A_v R_F}{1 + g_{m1}R_F - A_v}$ | $\\approx -R_F$ |\n| **Loop gain** | $T = \\dfrac{g_{m1}g_{m2}R_{D1}R_{D2}}{R_{D2}+R_F}$ | $\\gg 1$ |\n| **Input impedance** | $Z_{in} = \\dfrac{R_F}{1+T}$ | $\\approx 0$ (virtual gnd) |\n| **Output impedance** | $Z_{out} = \\dfrac{R_{D2}}{1+T}$ | $\\approx 0$ |\n\n---\n\n## Negative Feedback Verification\n\n$$I_{in}\\uparrow \\;\\to\\; v_{in}\\uparrow \\;\\xrightarrow{M_1\\,\\text{(CG)}}\\; v_X\\uparrow \\;\\xrightarrow{M_2\\,\\text{(CS)}}\\; v_{out}\\downarrow \\;\\xrightarrow{R_F}\\; i_{RF}\\downarrow \\;\\to\\; v_{in}\\downarrow \\checkmark$$\n\nThis confirms **stable negative feedback**. The TIA provides accurate current-to-voltage conversion with the closed-loop gain determined solely by $R_F$.",
        "format": "markdown",
        "sha256": "8e7dadfd299f3ca298ff1f200b14a7d11a15cb8cb2e46ecffd722176ce638556"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input, forming a negative-feedback transimpedance amplifier. It satisfies the golden solution’s explicit full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1573,
        "output_tokens": 59015,
        "total_tokens": 60588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 57915,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1573,
        "output_tokens": 59015,
        "total_tokens": 60588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 57915,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Two-Stage Transimpedance Amplifier Analysis\n\n## Circuit Identification\n\nThis is a **two-stage transimpedance amplifier (TIA)** with shunt-shunt negative feedback:\n\n| Element | Configuration |\n|---------|--------------|\n| **M₁** (NMOS) | Common-gate: source at input node, gate at $V_b$ (AC ground), drain at node $X$ |\n| **M₂** (NMOS) | Common-source: gate at $X$, drain at $V_{out}$, source at GND |\n| **R_F** | Feedback resistor: shunt-shunt feedback from $V_{out}$ → input |\n\n---\n\n## Small-Signal Analysis\n\nSetting $V_{DD} = 0$ and $V_b = 0$ (AC ground), the three node equations are:\n\n**KCL at $v_{in}$ (source of M₁):**\n$$\\boxed{\\left(g_{m1} + \\frac{1}{R_F}\\right)v_{in} - \\frac{v_{out}}{R_F} = i_{in}} \\tag{1}$$\n\nThe term $g_{m1}v_{in}$ arises because $v_{GS1} = -v_{in}$, so current $g_{m1}v_{in}$ is drawn from the input node into M₁'s source.\n\n**KCL at node $X$ (drain of M₁):**\n$$\\boxed{v_X = g_{m1}R_{D1}\\,v_{in}} \\tag{2}$$\n\n(Non-inverting common-gate gain: $+g_{m1}R_{D1}$)\n\n**KCL at $v_{out}$ (drain of M₂):**\n$$\\frac{v_{out}}{R_{D2}} + \\frac{v_{out}-v_{in}}{R_F} + g_{m2}v_X = 0 \\tag{3}$$\n\n---\n\n## Solving via Cramer's Rule\n\nSubstituting (2) into (3), the 2×2 system yields:\n\n$$\\boxed{Z_T = \\frac{v_{out}}{i_{in}} = \\frac{R_{D2}(1 - g_{m1}g_{m2}R_{D1}R_F)}{g_{m1}(R_{D2}+R_F) + g_{m1}g_{m2}R_{D1}R_{D2} + 1}}$$\n\n**For large open-loop gain** $A_v = g_{m1}g_{m2}R_{D1}R_{D2} \\gg 1$:\n\n$$\\boxed{Z_T \\approx -R_F}$$\n\nThis occurs because feedback drives the input to a **virtual ground** ($v_{in} \\approx 0$), so from (1): $v_{out} = -i_{in}R_F$.\n\n---\n\n## Key Performance Metrics\n\n**Closed-Loop Input Resistance:**\n$$R_{in} = \\frac{v_{in}}{i_{in}} = \\frac{R_{D2}+R_F}{g_{m1}(R_{D2}+R_F)+A_v+1} \\approx \\frac{R_F}{g_{m1}g_{m2}R_{D1}R_{D2}} \\ll R_F$$\n\n**Closed-Loop Output Resistance** (setting $i_{in}=0$):\n$$R_{out} = \\frac{1}{\\dfrac{1}{R_{D2}} + \\dfrac{g_{m1}(1+g_{m2}R_{D1})}{1+g_{m1}R_F}} \\approx R_{D2} \\,\\bigg\\|\\, \\frac{R_F}{g_{m2}R_{D1}}$$\n\n**Loop Gain:**\n$$T \\approx \\frac{g_{m2}R_{D1}R_{D2}}{R_F} \\quad (\\text{for } g_{m1}R_F \\gg 1,\\; R_F \\gg R_{D2})$$\n\n---\n\n## Negative Feedback Verification\n\n$$i_{in} \\nearrow \\;\\Rightarrow\\; v_{in} \\nearrow \\;\\Rightarrow\\; v_X = g_{m1}R_{D1}v_{in}\\nearrow \\;\\Rightarrow\\; v_{out} = -g_{m2}R_{D2}v_X \\searrow$$\n$$\\Rightarrow\\; i_{RF} = \\frac{v_{out}-v_{in}}{R_F} \\searrow \\;\\Rightarrow\\; \\text{current drawn from input node }\\nearrow \\;\\Rightarrow\\; \\textbf{opposes }i_{in}\\checkmark$$\n\n---\n\n## Summary\n\n| Parameter | Approximate Value | Condition |\n|-----------|-----------------|-----------|\n| Transimpedance $Z_T$ | $-R_F$ | $A_v \\gg 1$ |\n| Input resistance $R_{in}$ | $R_F/(g_{m1}g_{m2}R_{D1}R_{D2})$ | $A_v \\gg g_{m1}R_F$ |\n| Output resistance $R_{out}$ | $R_F/(g_{m2}R_{D1})$ | $g_{m1}R_F \\gg 1$ |\n| Loop gain $T$ | $g_{m2}R_{D1}R_{D2}/R_F$ | $g_{m1}R_F \\gg 1$ |\n\nThe common-gate first stage (M₁) provides enhanced gain, reverse isolation, and eliminates the Miller effect—making this topology ideal for **high-speed optical receiver front-ends**.",
        "format": "markdown",
        "sha256": "938106d4c0511e50d27cc13b7bd360195a59c04be5b5c1afd8d48da6165ebe6c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as the common-gate input device, M₂ as the common-source stage driven by X, and R_F as negative feedback from Vout to the input, forming a transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1573,
        "output_tokens": 88355,
        "total_tokens": 89928,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 86921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1573,
        "output_tokens": 88355,
        "total_tokens": 89928,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 86921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Transimpedance Amplifier (TIA) Analysis\n\n## Circuit Identification\n\nThis is a **two-stage NMOS transimpedance amplifier** with shunt-shunt feedback, converting input current $I_{in}$ into output voltage $V_{out}$.\n\n## Transistor Configurations\n\n| Transistor | Config | Source | Gate | Drain |\n|-----------|--------|--------|------|-------|\n| M₁ (NMOS) | Common-Gate | $V_{in}$ | $V_b$ (AC gnd) | $X$ |\n| M₂ (NMOS) | Common-Source | GND | $X$ | $V_{out}$ |\n\n**Signal path:** $I_{in} \\rightarrow V_{in} \\xrightarrow{M_1\\text{ (CG)}} V_X \\xrightarrow{M_2\\text{ (CS)}} V_{out} \\xrightarrow{R_F} V_{in}$\n\n$R_F$ implements **shunt-shunt feedback** (the overall gain is inverting since non-inverting CG × inverting CS = inverting).\n\n---\n\n## Small-Signal Analysis\n\nSetting $V_{DD} = 0$, $V_b = 0$ (AC grounds):\n\n**KCL at node $X$:**\n$$\\frac{v_x}{R_{D1}} - g_{m1}v_{in} + \\frac{v_x - v_{in}}{r_{o1}} = 0 \\implies \\boxed{v_x = \\frac{(g_{m1}r_{o1}+1)R_{D1}}{r_{o1}+R_{D1}}\\,v_{in} \\approx g_{m1}R_{D1}\\,v_{in}}$$\n\n**KCL at $V_{out}$:**\n$$\\frac{v_{out}}{R_{D2}} + g_{m2}v_x + \\frac{v_{out}}{r_{o2}} + \\frac{v_{out}-v_{in}}{R_F} = 0$$\n\n**KCL at $V_{in}$:**\n$$I_{in} + \\frac{v_{out}-v_{in}}{R_F} + i_{d1} = 0, \\qquad i_{d1} \\approx -g_{m1}v_{in}$$\n\n---\n\n## Key Results ($r_o \\to \\infty$)\n\n| Parameter | General Expression | High Loop-Gain ($T\\gg1$) |\n|-----------|-------------------|--------------------------|\n| CG gain | $A_1 = g_{m1}R_{D1}$ | — |\n| CS gain | $A_2 = -g_{m2}R_{D2}$ | — |\n| Loop gain | $T = \\dfrac{g_{m2}R_{D1}R_{D2}}{R_F}$ | — |\n| **Closed-loop transimpedance** | $Z_T = \\dfrac{-g_{m2}R_{D1}R_{D2}}{1+T}$ | $\\approx -R_F$ |\n| Input impedance | $Z_{in} = \\dfrac{1}{g_{m1}(1+T)}$ | $\\approx \\dfrac{R_F}{g_{m1}g_{m2}R_{D1}R_{D2}}$ |\n| Output impedance | $Z_{out} = \\dfrac{R_{D2}}{1+T}$ | $\\approx \\dfrac{R_F}{g_{m2}R_{D1}}$ |\n\n### Primary Result:\n$$\\boxed{V_{out} = -R_F \\cdot I_{in}}$$\n\n---\n\n## Physical Operation (Negative Feedback Verification)\n\n$$I_{in} \\uparrow \\;\\Rightarrow\\; V_{in} \\uparrow \\;\\Rightarrow\\; V_{GS1}\\!\\downarrow \\;\\Rightarrow\\; I_{D1}\\!\\downarrow \\;\\Rightarrow\\; V_X \\uparrow \\;\\Rightarrow\\; I_{D2}\\!\\uparrow \\;\\Rightarrow\\; V_{out}\\!\\downarrow$$\n\n$$\\Rightarrow\\; i_{RF} = \\frac{V_{out}-V_{in}}{R_F}\\!\\downarrow \\;\\Rightarrow\\; V_{in}\\!\\downarrow \\quad \\checkmark \\text{ (negative feedback)}$$\n\nThe input is maintained at a **virtual ground** ($V_{in} \\approx 0$).\n\n---\n\n## Advantages of the CG Input Stage (M₁)\n\n1. **Low input impedance**: $Z_{in,0} \\approx 1/g_{m1}$ (intrinsic, not feedback-dependent) → reduces the input RC time constant with photodiode capacitance $C_{pd}$:\n$$f_{-3\\text{dB}} \\approx \\frac{g_{m1}}{2\\pi C_{pd}}$$\n\n2. **High loop gain**: The CG stage adds factor $g_{m1}R_{D1}$ over a single-stage CS TIA\n\n3. **Input-output isolation**: CG eliminates Miller multiplication of $C_{gd1}$, improving bandwidth\n\n**Application**: Standard topology for **optical fiber receivers**, converting photodiode current to voltage with gain precisely set by $R_F$.",
        "format": "markdown",
        "sha256": "d10f935d22e3f3efc9a453fe0ad520071bec640c06c7afdb67b639be06df070b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from Vout to the input, forming a transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1573,
        "output_tokens": 115408,
        "total_tokens": 116981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 114077,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1573,
        "output_tokens": 115408,
        "total_tokens": 116981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 114077,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis\n\n## Topology Identification\n\nFrom the schematic, the connections are:\n\n| Element | Configuration |\n|---------|--------------|\n| **M₁ (NMOS)** | Common-gate: gate = V_b (fixed bias), source = V_x, drain = V_out |\n| **M₂ (PMOS)** | Feedback device: source = V_DD, gate = V_out, drain = V_x |\n| **I₁** | DC bias current source (V_DD → V_out) |\n| **I_bias** | DC bias current sink (V_x → GND) |\n| **I_in** | Input signal current (into V_x) |\n\nThis is a **feedback transimpedance amplifier (TIA)**.\n\n---\n\n## DC Operating Point\n\n**KCL at V_out** (I₁ = I_{DS1}):\n$$I_1 = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1(V_b - V_x - V_{tn})^2 \\implies V_x = V_b - V_{tn} - \\sqrt{\\frac{2I_1}{\\mu_n C_{ox}(W/L)_1}}$$\n\n**KCL at V_x** (I_{in} = 0, so I_{SD2} + I_1 = I_{bias}):\n$$I_{bias} - I_1 = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2(V_{DD} - V_{out} - |V_{tp}|)^2 \\implies V_{out} = V_{DD} - |V_{tp}| - \\sqrt{\\frac{2(I_{bias}-I_1)}{\\mu_p C_{ox}(W/L)_2}}$$\n\n> **Requirement:** $I_{bias} > I_1$\n\n---\n\n## Small-Signal Analysis\n\nUsing the small-signal models with I₁ and I_bias as AC opens (ideal current sources):\n\n**M₁:** $i_{d1} = -g_{m1}v_x + \\dfrac{v_{out}-v_x}{r_{o1}}$\n\n**M₂ (PMOS):** $i_{sd2} = -g_{m2}v_{out} - \\dfrac{v_x}{r_{o2}}$\n\n### KCL at $v_{out}$ (since $I_1$ is AC open → $i_{d1} = 0$):\n$$0 = -g_{m1}v_x + \\frac{v_{out}-v_x}{r_{o1}} \\implies \\boxed{v_{out} = (1 + g_{m1}r_{o1})\\,v_x \\approx g_{m1}r_{o1}\\,v_x}$$\n\n### KCL at $v_x$ (since $I_{bias}$ is AC open and $i_{d1}=0$):\n$$i_{in} + i_{sd2} = 0 \\implies i_{in} = g_{m2}\\,v_{out} + \\frac{v_x}{r_{o2}}$$\n\nSubstituting $v_{out} \\approx g_{m1}r_{o1}\\,v_x$:\n$$i_{in} \\approx g_{m1}g_{m2}r_{o1}\\,v_x$$\n\n---\n\n## Key Results\n\n$$\\boxed{R_m = \\frac{v_{out}}{i_{in}} = \\frac{1}{g_{m2}}}$$\n\n| Parameter | Expression | Physical Meaning |\n|-----------|-----------|-----------------|\n| **Transresistance** $R_m$ | $1/g_{m2}$ | Set by feedback transistor M₂ |\n| **Input impedance** $Z_{in}$ | $\\approx 1/(g_{m1}g_{m2}r_{o1})$ | Near-zero → **virtual ground** at V_x |\n| **Output impedance** $R_{out}$ | $\\approx 1/g_{m2}$ | Low output impedance |\n| **Loop gain** $T$ | $g_{m1}g_{m2}r_{o1}r_{o2} \\gg 1$ | Large → confirms stable negative feedback |\n\n---\n\n## Feedback Mechanism\n\nThe **negative feedback loop** operates as:\n\n$$V_{out} \\uparrow \\;\\to\\; V_{sg2} = V_{DD}-V_{out}\\downarrow \\;\\to\\; I_{SD2}\\downarrow \\;\\to\\; V_x\\downarrow \\;\\to\\; V_{gs1}=V_b-V_x\\uparrow \\;\\to\\; I_{DS1}\\uparrow \\;\\to\\; V_{out}\\downarrow\\;\\checkmark$$\n\nThe circuit behaves analogously to a classic op-amp TIA:\n- **M₁** (open-loop gain $\\approx g_{m1}r_{o1}r_{o2}/1$) plays the role of the op-amp\n- **M₂** (transconductance $g_{m2}$) plays the role of the feedback resistor $R_f = 1/g_{m2}$\n\nThe large loop gain $T$ forces the input node V_x to a virtual ground, and the closed-loop transresistance is determined entirely by M₂'s transconductance.",
        "format": "markdown",
        "sha256": "f40464b97c8090f70bdec507444a82198595db1ab0cceeb92f35db9a6abd22a7"
      },
      "model_call_count": 3,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS, M2 as the PMOS feedback device, traces the feedback path, and gives the low input resistance and approximately 1/gm2 transresistance and output resistance. These satisfy the golden solution’s full-credit rule; the extra loop-gain and operating-point details do not change the core answer.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4593,
        "output_tokens": 341985,
        "total_tokens": 346578,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 340641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 85985,
        "total_tokens": 87516,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 84642,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 3,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis\n\n## Circuit Topology Identification\n\n| Component | Type | Connections |\n|-----------|------|-------------|\n| **M₁** | PMOS | Source = $V_{out}$, Gate = $V_b$, Drain = P |\n| **M₂** | NMOS | Gate = $V_{out}$ (feedback), Drain = $V_{DD}$, Source = P |\n| **I₁** | Current source | $V_{DD} \\to V_{out}$ |\n| **$I_{in}$** | Input | Injects current into node P |\n| **$I_{bias}$** | Bias sink | Node P $\\to$ GND |\n\n---\n\n## DC Analysis\n\n**KCL at $V_{out}$:** Only M₁ draws current from $V_{out}$:\n$$I_{D1} = I_1$$\n\nWith M₁ (PMOS) in saturation:\n$$\\boxed{V_{out} = V_b + |V_{TP}| + V_{OV1}}, \\qquad V_{OV1} = \\sqrt{\\frac{2I_1}{\\mu_p C_{ox}(W_1/L_1)}}$$\n\n**KCL at node P:** ($I_{D1}$ + $I_{D2}$ + $I_{in}$ flow in; $I_{bias}$ flows out)\n$$\\boxed{I_{D2} = I_{bias} - I_1 - I_{in}}, \\qquad V_P = V_{out} - V_{GS2}$$\n\n---\n\n## Small-Signal Analysis\n\n> Ideal DC sources → open circuits; $V_b$, $V_{DD}$, GND → AC ground\n\n**Small-signal drain currents:**\n$$i_{d1} = -(g_{m1}+g_{ds1})v_{out} + g_{ds1}\\,v_p \\quad\\text{(M₁, PMOS)}$$\n$$i_{d2} = g_{m2}\\,v_{out} - (g_{m2}+g_{ds2})\\,v_p \\quad\\text{(M₂, NMOS)}$$\n\n**KCL at $v_{out}$** (I₁ open; M₂ gate draws zero current):\n$$0 = (g_{m1}+g_{ds1})v_{out} - g_{ds1}\\,v_p \\implies \\boxed{v_{out} = \\frac{g_{ds1}}{g_{m1}+g_{ds1}}\\,v_p \\approx \\frac{g_{ds1}}{g_{m1}}\\,v_p} \\tag{1}$$\n\nSince $g_{ds1} \\ll g_{m1}$: $v_{out} \\ll v_p$ — **$V_{out}$ is nearly constant.**\n\n**KCL at node P** ($I_{bias}$ open):\n$$i_{in} + (g_{m1}+g_{ds1})v_{out} - g_{ds1}\\,v_p + g_{m2}\\,v_{out} - (g_{m2}+g_{ds2})\\,v_p = 0$$\n\nSubstituting (1) and simplifying:\n$$i_{in} = \\frac{g_{m1}g_{m2}}{g_{m1}+g_{ds1}}\\,v_p + g_{ds2}\\,v_p \\approx g_{m2}\\,v_p \\implies \\boxed{v_p \\approx \\frac{i_{in}}{g_{m2}}} \\tag{2}$$\n\n---\n\n## Key Results\n\n### Transimpedance ($I_{in} \\to V_{out}$)\n$$\\boxed{\\frac{v_{out}}{i_{in}} \\approx \\frac{g_{ds1}}{g_{m1}\\,g_{m2}} = \\frac{1}{g_{m1}\\,g_{m2}\\,r_{o1}} \\approx 0}$$\n$V_{out}$ is **essentially unaffected** by $I_{in}$ (zero for long-channel FETs).\n\n### Output Impedance at $V_{out}$\nApplying test current $i_t$ at $v_{out}$ (with $i_{in}=0$):\n$$i_t \\approx g_{m1}\\,v_t \\implies \\boxed{R_{out} \\approx \\frac{1}{g_{m1}}}$$\n\n### Input Impedance at Node P\n$$\\boxed{R_P \\approx \\frac{1}{g_{m2}}}$$\n\n---\n\n## Physical Interpretation of M₂ Feedback\n\n$$I_{in} \\uparrow \\;\\Longrightarrow\\; V_P \\uparrow \\;\\Longrightarrow\\; V_{GS2}=V_{out}-V_P \\downarrow \\;\\Longrightarrow\\; I_{D2} \\downarrow \\;\\Longrightarrow\\; V_P \\text{ stabilizes}$$\n\nM₂ acts as a **local negative-feedback element**, creating an effective conductance $\\approx g_{m2}$ at node P. This keeps $V_P$ well-regulated while $V_{out}$ remains pinned at $V_b+|V_{TP}|+V_{OV1}$.\n\n---\n\n## Summary\n\n| Parameter | Result | Significance |\n|-----------|--------|-------------|\n| $V_{out}$ (DC) | $V_b + \\|V_{TP}\\| + V_{OV1}$ | Stable reference, set by $I_1$ and $V_b$ |\n| $v_{out}/i_{in}$ | $\\approx g_{ds1}/(g_{m1}g_{m2}) \\approx 0$ | $V_{out}$ insensitive to $I_{in}$ |\n| $v_p/i_{in}$ | $\\approx 1/g_{m2}$ | Low-impedance node P |\n| $R_{out}$ at $V_{out}$ | $\\approx 1/g_{m1}$ | Source-follower output impedance |\n\nThis circuit is a **Flipped Voltage Follower (FVF)**-type topology: M₂'s gate-feedback to $V_{out}$ creates a low-impedance internal node P, allowing the circuit to absorb large variations in $I_{in}$ while maintaining a stable, low-output-impedance voltage at $V_{out}$.",
        "format": "markdown",
        "sha256": "dd9ec80f73d842072b04b090c5859c2341d1bf7dabbf47c14593245f435869eb"
      },
      "model_call_count": 3,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies both transistor types and gives the wrong signal path and transimpedance. It does identify M2 as driven by Vout and reports a low input resistance of about 1/gm2, meeting the golden solution’s limited-credit rule for a device-type misread.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4593,
        "output_tokens": 369342,
        "total_tokens": 373935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 367731,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 113342,
        "total_tokens": 114873,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 111731,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 3,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: CMOS Transresistance Amplifier\n\n## Circuit Identification\n\nThe circuit is a **negative-feedback transresistance (transimpedance) amplifier** with:\n- **M₁ (NMOS):** Common-gate configuration — Drain at $V_{out}$, Gate at $V_b$, Source at node $V_x$\n- **M₂ (PMOS):** Feedback element — Source at $V_{DD}$, Gate at $V_{out}$, Drain at $V_x$\n- **I₁:** DC bias from $V_{DD}$ into $V_{out}$\n- **$I_{bias}$ (unlabeled):** DC sink from $V_x$ to ground\n- **$I_{in}$:** Input signal current at $V_x$\n\n---\n\n## DC Operating Point\n\n**KCL at $V_{out}$:**\n$$I_1 = I_{D1} = \\frac{1}{2}\\mu_n C_{ox}\\!\\left(\\frac{W}{L}\\right)_{\\!1}(V_b - V_x - V_{TN})^2$$\nThis uniquely determines $V_x$.\n\n**KCL at $V_x$:**\n$$I_{D2} = I_{bias} - I_1 - I_{in,DC}$$\nSince $I_{D2} = \\frac{1}{2}|\\mu_p|C_{ox}\\!\\left(\\frac{W}{L}\\right)_{\\!2}(V_{DD}-V_{out}-|V_{TP}|)^2$, this determines $V_{out}$.\n\n---\n\n## Small-Signal Analysis\n\nWith $I_1$, $I_{bias}$ as AC open circuits and $V_{DD}$, $V_b$ at AC ground:\n\n**KCL at $V_{out}$** (only M₁ drain current present):\n$$0 = -g_{m1}v_x + \\frac{v_{out}-v_x}{r_{o1}} \\implies \\boxed{v_{out} = (1 + g_{m1}r_{o1})\\,v_x \\approx g_{m1}r_{o1}\\,v_x}$$\nSince $g_{m1}r_{o1} \\gg 1$, node $V_x$ is a **virtual ground**.\n\n**KCL at $V_x$** (using $i_{d1}=0$ from above):\n$$i_{in} + i_{p2} = 0, \\qquad i_{p2} = -g_{m2}v_{out} - \\frac{v_x}{r_{o2}} \\approx -g_{m2}v_{out}$$\n$$\\implies i_{in} = g_{m2}\\,v_{out}$$\n\n### Key Results\n\n| Parameter | Exact Expression | High Loop-Gain Approximation |\n|-----------|----------------|-----------------------------|\n| **Transresistance** $R_m = v_{out}/i_{in}$ | $\\dfrac{g_{m1}r_{o1}r_{o2}}{1 + g_{m1}r_{o1}g_{m2}r_{o2}}$ | $\\dfrac{1}{g_{m2}}$ |\n| **Input resistance** at $V_x$ | $\\dfrac{1}{g_{m1}g_{m2}r_{o1}+g_{m1}/r_{o2}+\\cdots}$ | $\\dfrac{1}{g_{m1}g_{m2}r_{o1}}\\approx 0$ |\n| **Output resistance** at $V_{out}$ | $\\dfrac{1}{g_{m2}+(1+g_{m2}/g_{m1})/r_{o1}}$ | $\\dfrac{1}{g_{m2}}$ |\n| **Loop gain** $T$ | $g_{m1}r_{o1}\\cdot g_{m2}r_{o2}$ | $\\mu_1\\cdot\\mu_2 \\gg 1$ |\n\n---\n\n## Negative Feedback Mechanism\n\n$$V_{out}\\uparrow \\;\\longrightarrow\\; V_{SG2}\\downarrow \\;\\longrightarrow\\; I_{D2}\\downarrow \\;\\longrightarrow\\; V_x\\downarrow \\;\\longrightarrow\\; V_{GS1}\\uparrow \\;\\longrightarrow\\; I_{D1}\\uparrow \\;\\longrightarrow\\; V_{out}\\downarrow\\checkmark$$\n\nThe large loop gain $T = g_{m1}r_{o1}g_{m2}r_{o2}$ ensures that:\n1. $V_x$ is held at virtual ground (low input impedance)\n2. $V_{out}$ is an accurate replica of $I_{in}/g_{m2}$\n\n---\n\n## Summary\n\n$$\\boxed{V_{out} = \\frac{I_{in}}{g_{m2}}}$$\n\nThe circuit converts input current to output voltage with transresistance $1/g_{m2}$, determined solely by M₂'s transconductance. The common-gate NMOS (M₁) provides high open-loop gain $g_{m1}r_{o1}r_{o2}$, while the PMOS (M₂) closes the feedback loop, resulting in a low, well-defined output impedance of $1/g_{m2}$.",
        "format": "markdown",
        "sha256": "a39929c1906fe30fa79d5ec748f39ae5d8f803a4f684db31ede53b1db9fef4da"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as the common-gate NMOS and M₂ as the PMOS feedback device driven by Vout, describes the feedback path to the input node, and gives the key low-input-resistance and approximately 1/gm₂ transresistance/output-resistance results.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3062,
        "output_tokens": 252902,
        "total_tokens": 255964,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 251555,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1531,
        "output_tokens": 124902,
        "total_tokens": 126433,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 123556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of the Three-Stage Ring Oscillator\n\n### Circuit Model\n\nEach inverter is modeled as an inverting amplifier with DC voltage gain $A_0 = g_m R_{out}$ and a single output pole formed by the output resistance $R_{out}$ and load capacitance $C_L$:\n\n$$H(s) = \\frac{-A_0}{1 + s R_{out} C_L} = \\frac{-A_0}{1 + s\\tau}$$\n\nwhere $\\tau = R_{out}C_L$.\n\n### Barkhausen Criteria\n\nThe loop gain for three cascaded stages is:\n\n$$T(j\\omega) = \\left(\\frac{-A_0}{1+j\\omega\\tau}\\right)^3$$\n\n**Phase Condition** (requires total phase = −360°):\n\n$$\\underbrace{-180°}_{\\text{3 inversions}} - 3\\arctan(\\omega\\tau) = -360°$$\n\n$$\\Longrightarrow \\quad \\arctan(\\omega\\tau) = 60° \\quad \\Longrightarrow \\quad \\omega_\\text{osc} = \\frac{\\sqrt{3}}{\\tau} = \\frac{\\sqrt{3}}{R_{out}C_L}$$\n\n**Gain Condition** (evaluated at $\\omega_\\text{osc}$, where $\\omega_\\text{osc}^2\\tau^2 = 3$):\n\n$$|T(j\\omega_\\text{osc})| = \\frac{A_0^3}{\\left(1+3\\right)^{3/2}} = \\frac{A_0^3}{8} \\geq 1 \\quad \\Longrightarrow \\quad A_0 \\geq 2$$\n\n### Key Observation\n\n| Parameter | Dependence on $C_L$ |\n|-----------|---------------------|\n| Oscillation frequency $f_\\text{osc} = \\dfrac{\\sqrt{3}}{2\\pi R_{out}C_L}$ | $\\propto 1/C_L$ → 0 |\n| Gain condition $A_0^3/8 \\geq 1$ | **Independent of $C_L$** |\n\n### Conclusion\n\n**No — the circuit does not fail to oscillate.** As $C_L \\to \\infty$, the oscillation frequency decreases as $f_\\text{osc} \\propto 1/C_L$, but the Barkhausen gain criterion ($A_0 \\geq 2$) is entirely independent of capacitance. Both oscillation conditions continue to be satisfied for any finite $C_L$. The ring oscillator simply slows down proportionally, without losing its ability to oscillate.",
        "format": "markdown",
        "sha256": "efc3a70a19f40c3c9cf2eb916ad878709fd09c34b598f59e2b847ec15b7d269c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency and shows that scaling all three capacitors lowers the oscillation frequency without changing the gain condition.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1319,
        "output_tokens": 4084,
        "total_tokens": 5403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3410,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1319,
        "output_tokens": 4084,
        "total_tokens": 5403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3410,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of the Three-Stage Ring Oscillator\n\n### Circuit Model\n\nEach inverter can be modeled as a voltage-controlled source with DC gain magnitude $A_0$ and output resistance $R$, loaded by $C_L$. The transfer function of each stage is:\n\n$$H(s) = \\frac{-A_0}{1 + s R C_L} = \\frac{-A_0}{1 + s\\tau}$$\n\nwhere $\\tau = RC_L$.\n\n### Loop Gain and Barkhausen Criterion\n\nThe total loop gain for three identical stages is:\n\n$$T(j\\omega) = [H(j\\omega)]^3 = \\frac{-A_0^3}{(1+j\\omega\\tau)^3}$$\n\n**Phase Condition** ($\\angle T = 0°$):\n$$180° - 3\\arctan(\\omega_0 \\tau) = 0° \\implies \\omega_0 = \\frac{\\sqrt{3}}{\\tau} = \\frac{\\sqrt{3}}{RC_L}$$\n\nAs $C_L \\to \\infty$, the oscillation frequency $\\omega_0 \\to 0$, but let's check the magnitude condition.\n\n**Magnitude Condition** at $\\omega_0\\tau = \\sqrt{3}$:\n\n$$|T(j\\omega_0)| = \\frac{A_0^3}{(1+\\omega_0^2\\tau^2)^{3/2}} = \\frac{A_0^3}{(1+3)^{3/2}} = \\frac{A_0^3}{8} \\geq 1$$\n\nThis requires $A_0 \\geq 2$, which is **independent of $C_L$**.\n\n### Key Result\n\n| Quantity | Dependence on $C_L$ |\n|---------|-------------------|\n| Oscillation frequency $f_0 = \\frac{\\sqrt{3}}{2\\pi RC_L}$ | $\\propto 1/C_L \\to 0$ |\n| Loop gain magnitude $A_0^3/8$ | **Independent of $C_L$** |\n\n### Conclusion\n\n**No — the circuit does not fail to oscillate.** As long as $A_0 \\geq 2$ (easily satisfied by typical inverters), the Barkhausen magnitude criterion remains fulfilled for *any* value of $C_L$. \n\nIncreasing $C_L$ only slows the oscillation ($f_0 \\propto 1/C_L$) because the propagation delay per stage grows as $t_p \\propto RC_L$. In the limit $C_L \\to \\infty$, the period becomes infinite (zero frequency), but the oscillatory mechanism is never disrupted — the circuit simply oscillates arbitrarily slowly.",
        "format": "markdown",
        "sha256": "b0813f88d6b0dc34d58788465f3379f43532bfbf0bd39f25d0d8ac22f5ffa129"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal capacitors at all three nodes lower the oscillation frequency without changing the Barkhausen gain condition, and supports this with a valid small-signal phase and magnitude analysis.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1319,
        "output_tokens": 4662,
        "total_tokens": 5981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3982,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1319,
        "output_tokens": 4662,
        "total_tokens": 5981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3982,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of the Three-Stage Ring Oscillator\n\n### Small-Signal Model of Each Stage\n\nEach inverter with load capacitor $C_L$ has the transfer function:\n\n$$H(s) = \\frac{-g_m R_o}{1 + sR_oC_L}$$\n\nwhere $R_o$ is the output resistance and $g_m$ is the transconductance.\n\n### Loop Gain and Barkhausen Criterion\n\nThe total loop gain for three stages is:\n\n$$T(j\\omega) = \\left[\\frac{-g_m R_o}{1 + j\\omega R_o C_L}\\right]^3$$\n\n**Phase condition** — requiring $\\angle T = 0°$ (i.e., $-360°$):\n\n$$-180° - 3\\arctan(\\omega R_o C_L) = -360°$$\n$$\\arctan(\\omega R_o C_L) = 60° \\implies \\omega_{\\text{osc}} = \\frac{\\sqrt{3}}{R_o C_L}$$\n\n**Magnitude condition** — requiring $|T| = 1$ at $\\omega_{\\text{osc}}$:\n\n$$|T(j\\omega_{\\text{osc}})| = \\frac{(g_m R_o)^3}{\\left(\\sqrt{1+3}\\right)^3} = \\frac{(g_m R_o)^3}{8} = 1 \\implies \\boxed{g_m R_o = 2}$$\n\n### Effect of Large Capacitors\n\n| Quantity | Dependence on $C_L$ |\n|---|---|\n| Oscillation frequency $\\omega_{\\text{osc}} = \\sqrt{3}/(R_o C_L)$ | $\\propto 1/C_L$ → 0 |\n| Oscillation **condition** $g_m R_o \\geq 2$ | **Independent of $C_L$** |\n\n### Conclusion\n\n**No — the circuit does not fail to oscillate.** As $C_L \\to \\infty$, the oscillation frequency tends toward zero (infinite period), but the Barkhausen magnitude condition $g_m R_o \\geq 2$ is entirely independent of $C_L$. The capacitors control *how fast* the circuit oscillates, not *whether* it oscillates. The odd number of inversions (3 stages) ensures there is no stable DC operating point for any finite capacitance.",
        "format": "markdown",
        "sha256": "4cf14717cc24c61e3b4a6da186a8034274745a6b4a6edc8184c6c903104648c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives an oscillation frequency proportional to 1/CL and a gain condition independent of CL, supporting the conclusion that the ring continues oscillating more slowly. The extra odd-inversion claim is overbroad but does not undermine the valid small-signal argument.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1319,
        "output_tokens": 4185,
        "total_tokens": 5504,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3585,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1319,
        "output_tokens": 4185,
        "total_tokens": 5504,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3585,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Phase Noise When Capacitors Are Doubled\n\n### Ring Oscillator Model\n\nThis is a 3-stage CMOS ring oscillator where each inverter drives a load capacitor $C_L$. Using the **Linear Time-Variant (LTV) model** by Hajimiri and Lee, the phase noise is:\n\n$$\\boxed{\\mathcal{L}(\\Delta\\omega) = \\frac{N \\cdot \\Gamma_\\text{rms}^2 \\cdot \\overline{i_n^2/\\Delta f}}{2\\, q_\\text{max}^2 \\cdot \\Delta\\omega^2}}$$\n\nwhere:\n- $N = 3$ (number of stages)  \n- $q_\\text{max} = C_L V_{DD}$ (maximum charge swing at each node)  \n- $\\Gamma_\\text{rms}$ = RMS of the Impulse Sensitivity Function  \n- $\\overline{i_n^2}$ = transistor noise current PSD\n\n### Effect of Doubling $C_L$\n\n| Parameter | Before | After ($C_L \\to 2C_L$) |\n|-----------|--------|------------------------|\n| Oscillation frequency $f_0 \\propto 1/C_L$ | $f_0$ | $f_0/2$ |\n| Max charge $q_\\text{max} = C_L V_{DD}$ | $q_\\text{max}$ | $2\\,q_\\text{max}$ |\n| Transistor noise $\\overline{i_n^2}$ (same $g_m$) | unchanged | unchanged |\n| Waveform shape / $\\Gamma_\\text{rms}$ | — | unchanged* |\n\n*The rise/fall-to-period ratio $(1/2N = 1/6)$ is preserved since both scale with $C_L$.\n\n### Result\n\nSubstituting $q_\\text{max} \\to 2q_\\text{max}$:\n\n$$\\mathcal{L}'(\\Delta\\omega) = \\frac{N\\,\\Gamma_\\text{rms}^2\\,\\overline{i_n^2}}{2\\,(2C_L V_{DD})^2\\,\\Delta\\omega^2} = \\frac{1}{4}\\,\\mathcal{L}(\\Delta\\omega)$$\n\n> **The phase noise improves by 6 dB** (reduces by a factor of 4 at any fixed offset frequency $\\Delta f$).\n\n### Physical Intuition\n\nA larger capacitor stores more charge per cycle. Any noise-induced charge impulse $\\delta q$ produces a smaller phase perturbation $\\Delta\\phi = \\delta q \\cdot \\Gamma / q_\\text{max}$, since the oscillator has greater \"phase inertia.\" This can also be seen via Leeson's formula: since $P_\\text{dynamic} = NC_L V_{DD}^2 f_0 \\propto C_L \\cdot (1/C_L) =$ **constant**, while $f_0^2 \\propto 1/C_L^2$, the phase noise $\\mathcal{L} \\propto f_0^2/P \\propto 1/C_L^2$.",
        "format": "markdown",
        "sha256": "c7c70b87ce10eeabd57ebec5bad1c995afe18130c6735bb3bdda045e43916a1e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling the capacitors halves the oscillation frequency and reduces phase noise by a factor of four (6 dB) at a fixed offset. The charge/phase-perturbation argument supports the result, as required for full credit.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1315,
        "output_tokens": 11804,
        "total_tokens": 13119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10998,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1315,
        "output_tokens": 11804,
        "total_tokens": 13119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10998,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Phase Noise When Capacitors Are Doubled\n\n### Ring Oscillator Behavior\n\nThe figure shows a **3-stage ring oscillator** with inverting stages, each loading capacitor $C_L$ at the output.\n\n**Effect on oscillation frequency:**\n\nThe propagation delay per stage is:\n$$t_{pd} \\approx \\frac{C_L \\cdot V_{DD}}{2I_D}$$\n\nSo the oscillation frequency is:\n$$f_0 = \\frac{1}{2N \\cdot t_{pd}} = \\frac{I_D}{N C_L V_{DD}}$$\n\nWhen $C_L \\rightarrow 2C_L$: $\\quad f_0 \\rightarrow \\dfrac{f_0}{2}$\n\n### Phase Noise Analysis (Hajimiri-Lee Model)\n\nThe SSB phase noise is given by:\n$$\\mathcal{L}(\\Delta\\omega) = \\frac{N \\cdot \\Gamma_{rms}^2 \\cdot \\overline{i_n^2/\\Delta f}}{2\\, q_{max}^2 \\cdot \\Delta\\omega^2}$$\n\nwhere $q_{max} = C_L \\cdot V_{DD}$ is the maximum charge swing at each node.\n\n| Parameter | Before | After ($C_L \\to 2C_L$) |\n|-----------|--------|------------------------|\n| $q_{max}$ | $C_L V_{DD}$ | $2C_L V_{DD}$ |\n| $q_{max}^2$ | $C_L^2 V_{DD}^2$ | $4C_L^2 V_{DD}^2$ |\n| $g_m$ (transistors) | $g_m$ | $g_m$ (unchanged) |\n| $\\Gamma_{rms}$ | $\\Gamma_{rms}$ | $\\Gamma_{rms}$ (waveform shape unchanged†) |\n\n†When $C_L$ doubles, both rise/fall times and period double proportionally, leaving the normalized waveform shape (and thus $\\Gamma_{rms}$) unchanged.\n\n### Result\n\n$$\\boxed{\\mathcal{L}_{new}(\\Delta\\omega) = \\frac{1}{4}\\,\\mathcal{L}_{old}(\\Delta\\omega)}$$\n\n**The phase noise improves by 6 dB.**\n\n### Physical Intuition\n\nDoubling $C_L$ doubles the charge swing $q_{max}$, so any injected noise charge $\\Delta q$ produces half the phase perturbation ($\\Delta\\varphi = \\Gamma \\cdot \\Delta q / q_{max}$). Since phase noise scales as $(\\Delta\\varphi)^2 \\propto 1/q_{max}^2$, quadrupling $q_{max}^2$ yields the 6 dB improvement — at the cost of **halving the oscillation frequency**.",
        "format": "markdown",
        "sha256": "9bf690110e0a9bbefa58f5c7762a47020b2767cd6bf078eea73aa30e846e337b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling the capacitors halves the oscillation frequency and gives about a fourfold (6 dB) phase-noise reduction at a fixed offset, supported by the increased charge swing.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1315,
        "output_tokens": 30819,
        "total_tokens": 32134,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30099,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1315,
        "output_tokens": 30819,
        "total_tokens": 32134,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30099,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Phase Noise When Capacitors Are Doubled\n\n### Effect on Oscillation Frequency\n\nFor this 3-stage ring oscillator, the oscillation frequency is set by the propagation delay of each inverter stage:\n\n$$f_0 = \\frac{I_{drive}}{2N \\cdot C_L V_{DD}}$$\n\nSince $f_0 \\propto 1/C_L$, doubling all three capacitors **halves the oscillation frequency**:\n$$f_0 \\rightarrow \\frac{f_0}{2}$$\n\n### Effect on Power Consumption\n\nThe total power dissipated by the CMOS ring oscillator is:\n$$P_{total} = N \\cdot C_L V_{DD}^2 f_0 = N \\cdot C_L V_{DD}^2 \\cdot \\frac{I_{drive}}{2NC_L V_{DD}} = \\frac{I_{drive} V_{DD}}{2}$$\n\nThis is **independent of $C_L$** — the power remains constant when capacitors are doubled.\n\n### Effect on Phase Noise\n\nUsing Leeson's model (in the $1/f^2$ region):\n\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{f_0^2}{P_{total} \\cdot \\Delta f^2}$$\n\nWhen $C_L \\rightarrow 2C_L$:\n\n| Quantity | Change |\n|---------|--------|\n| $f_0$ | $\\div 2$ |\n| $f_0^2$ | $\\div 4$ |\n| $P_{total}$ | unchanged |\n\n$$\\boxed{\\mathcal{L}'(\\Delta f) = \\frac{(f_0/2)^2}{P_{total}\\,\\Delta f^2} = \\frac{1}{4}\\,\\mathcal{L}(\\Delta f)}$$\n\n### Result\n\nThe phase noise **improves by 6 dB** (reduces by a factor of 4) at any fixed offset frequency $\\Delta f$.\n\n**Physical intuition:** Larger capacitors store more charge per oscillation cycle ($q_{max} = C_L V_{DD} \\rightarrow 2C_L V_{DD}$). Since phase noise scales as $\\propto 1/q_{max}^2$, doubling the stored charge makes the oscillator four times less sensitive to noise perturbations — at the cost of halving the oscillation frequency while keeping power constant.",
        "format": "markdown",
        "sha256": "9621bfec6966fa14f59760c71fff638165fb8d96cfcadc7291c8b2c2d1ecb04b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by a factor of four (6 dB) at a fixed offset; the charge-based intuition is also consistent with the golden solution.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1315,
        "output_tokens": 31589,
        "total_tokens": 32904,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1315,
        "output_tokens": 31589,
        "total_tokens": 32904,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Ring Oscillator with Load Capacitance\n\n### Circuit Description\n\nThe circuit is a **3-stage ring oscillator** — three inverters connected in a closed loop — with a load capacitor $C_L$ placed at the output of the first inverter.\n\n### Effect of $C_L$ on Oscillation\n\nFor each inverter stage modeled with output resistance $R_{out}$ and node capacitance, the propagation delay of the **first stage** is:\n\n$$t_{pd1} = R_{out} \\cdot (C_{in,2} + C_L) \\cdot \\ln 2$$\n\nAs $C_L \\to \\infty$, the total oscillation period becomes:\n\n$$T = 2\\bigl(t_{pd1} + t_{pd2} + t_{pd3}\\bigr) \\xrightarrow{C_L \\to \\infty} \\infty$$\n\nwhich means the oscillation **frequency** approaches zero:\n\n$$f = \\frac{1}{T} \\to 0$$\n\n### Does It Stop Oscillating?\n\n**No.** The circuit does *not* fail to oscillate. Here is why:\n\n| Condition | Behavior |\n|-----------|----------|\n| Finite $C_L$ (any value) | Still oscillates at $f = 1/T > 0$ |\n| $C_L \\to \\infty$ | Frequency $\\to 0$, but oscillation persists |\n\nBecause the inverters are **digital (rail-to-rail) drivers**, the output of the first stage will *always* eventually charge or discharge $C_L$ past the switching threshold $V_{DD}/2$, no matter how large $C_L$ is. This guarantees that state transitions continue to propagate around the ring.\n\n### Key Conclusion\n\n$$\\boxed{f = \\frac{1}{2(t_{pd1}+t_{pd2}+t_{pd3})} \\to 0 \\text{ as } C_L \\to \\infty}$$\n\nThe circuit **does not fail to oscillate** — it simply oscillates more and more slowly. For any finite value of $C_L$, a finite (though arbitrarily small) oscillation frequency is maintained. This distinguishes a digital ring oscillator from a linear oscillator governed by the Barkhausen criterion.",
        "format": "markdown",
        "sha256": "498715e310541b26c49ae6f04f358628d5f80e63cad9596d1eb991a31169b98d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the one-node load increases delay, but concludes that oscillation persists for every finite capacitance. A sufficiently large load creates dominant-pole roll-off that breaks the loop’s oscillation condition, so the central conclusion is wrong.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1317,
        "output_tokens": 2144,
        "total_tokens": 3461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1594,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1317,
        "output_tokens": 2144,
        "total_tokens": 3461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1594,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of the Ring Oscillator with Capacitive Load\n\n### Circuit Description\nThe circuit is a 3-stage CMOS ring oscillator (three inverters in a feedback loop) with an external capacitive load $C_L$ attached to the output of the first inverter.\n\n### Transfer Function Model\nModeling each inverter with voltage gain $A_0 = g_m R_{out}$ and output resistance $R_{out}$, the loop gain is:\n\n$$T(j\\omega) = \\frac{(-A_0)^3}{\\underbrace{(1 + j\\omega R_{out}(C + C_L))}_{\\text{stage 1 with }C_L} \\cdot \\underbrace{(1 + j\\omega R_{out}C)^2}_{\\text{stages 2 \\& 3}}}$$\n\n### Phase Condition\n\nFor oscillation, the poles must contribute $-180°$ of additional phase (beyond the $3\\times180°$ from inversions):\n\n$$\\underbrace{-\\arctan\\!\\bigl(\\omega R_{out}(C{+}C_L)\\bigr)}_{\\text{stage 1}} - \\underbrace{2\\arctan(\\omega R_{out} C)}_{\\text{stages 2 \\& 3}} = -180°$$\n\nAs $C_L \\to \\infty$, the first term $\\to -90°$, so the remaining stages must supply $-90°$:\n$$\\omega_{\\rm osc} = \\frac{1}{R_{out}C} \\quad (\\text{finite, non-zero})$$\n\n### Gain Condition — The Critical Issue\n\nUsing the phase condition, the loop gain magnitude evaluates to:\n\n$$\\boxed{|T(j\\omega_{\\rm osc})| = A_0^3 \\cdot \\frac{x^2 - 1}{(x^2+1)^2}}$$\n\nwhere $x = \\omega_{\\rm osc} R_{out}C = \\sqrt{1 + \\dfrac{2C}{C+C_L}}$.\n\n| $C_L$ | $x$ | $\\|T\\|$ |\n|--------|------|---------|\n| $0$ | $\\sqrt{3}$ | $A_0^3/8$ (standard result: need $A_0 > 2$) |\n| finite, large | $\\to 1^+$ | $\\to 0$ |\n| $\\infty$ | $1$ | **0** |\n\nAs $C_L \\to \\infty$, the first stage's gain collapses:\n\n$$|T| \\approx \\frac{A_0^3\\, C}{2\\, C_L} \\xrightarrow{C_L\\to\\infty} 0$$\n\n### Conclusion\n\n**Yes — the circuit fails to oscillate for arbitrarily large $C_L$.**\n\nThe large $C_L$ short-circuits the first inverter's AC output, driving the loop gain to zero. Even though the phase condition is satisfiable at a *finite* frequency $\\omega_{\\rm osc} = 1/R_{out}C$, the Barkhausen gain criterion ($|T| \\geq 1$) is inevitably violated for sufficiently large $C_L$. Beyond the critical value\n\n$$C_{L,\\max} = C\\cdot\\frac{3 - x_c^2}{x_c^2 - 1}, \\qquad \\text{where } \\frac{x_c^2-1}{(x_c^2+1)^2} = \\frac{1}{A_0^3},$$\n\nthe oscillator ceases to function.",
        "format": "markdown",
        "sha256": "d14c9a36671c7f0af17604af8f7153fb7f8a261158f9b0a15aa49f6548eab3f9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large load capacitance prevents oscillation and explains that the loaded stage’s gain collapses, causing the loop gain to fall below unity and violate Barkhausen. The added phase and gain analysis is consistent with the essential mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1317,
        "output_tokens": 8172,
        "total_tokens": 9489,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7276,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1317,
        "output_tokens": 8172,
        "total_tokens": 9489,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7276,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of the Ring Oscillator with Load Capacitor\n\n### Circuit Setup\n\nThe figure shows a **3-stage ring oscillator** (3 inverters in a feedback loop), with $C_L$ connected at the output of the first inverter. Each inverter is modeled as an inverting amplifier with gain $-A_0$ and output pole at $\\omega_{p} = 1/(R_o C)$.\n\n---\n\n### Oscillation Conditions (Barkhausen Criterion)\n\nThe loop gain is:\n$$L(j\\omega) = \\underbrace{\\frac{-A_0}{1+j\\omega/\\omega_{p1}}}_{\\text{Stage 1 (loaded)}} \\cdot \\underbrace{\\frac{(-A_0)^2}{(1+j\\omega/\\omega_p)^2}}_{\\text{Stages 2 \\& 3}}$$\n\nwhere $\\omega_{p1} = \\dfrac{1}{R_o(C + C_L)}$.\n\n**Phase Condition:** $\\angle L = 0°$ requires:\n$$\\arctan\\!\\left(\\frac{\\omega}{\\omega_{p1}}\\right) + 2\\arctan\\!\\left(\\frac{\\omega}{\\omega_p}\\right) = 180°$$\n\n**Gain Condition:** $|L| \\geq 1$ gives:\n$$|L| = \\frac{A_0^3\\,(x-1)}{(x+1)^2}, \\quad x = \\left(\\frac{\\omega}{\\omega_p}\\right)^2 > 1$$\n\n---\n\n### Effect of $C_L \\to \\infty$\n\nAs $C_L \\to \\infty$: $\\;\\omega_{p1} \\to 0$, so $\\arctan(\\omega/\\omega_{p1}) \\to 90°$.\n\nThe **phase condition** then requires $\\omega \\to \\omega_p$ (i.e., $x \\to 1^+$).\n\nHowever, at this frequency the **gain through Stage 1** becomes:\n$$|H_1(j\\omega_p)| = \\frac{A_0}{\\sqrt{1+(\\omega_p/\\omega_{p1})^2}} \\approx \\frac{A_0\\,\\omega_{p1}}{\\omega_p} = \\frac{A_0}{R_o C_L\\,\\omega_p} \\xrightarrow{C_L\\to\\infty} 0$$\n\nThe total loop gain becomes:\n$$|L| = \\frac{A_0^3(x-1)}{(x+1)^2} \\xrightarrow{x\\to 1} 0$$\n\n---\n\n### Conclusion\n\n| $C_L$ | $\\omega_\\text{osc}$ | $\\|L\\|$ |\n|--------|---------------------|---------|\n| $C_L = 0$ | $\\omega_p\\sqrt{3}$ | $A_0^3/8$ (maximum) |\n| $C_L$ increasing | decreasing toward $\\omega_p$ | decreasing |\n| $C_L \\to \\infty$ | $\\to \\omega_p$ | $\\to 0$ |\n\n> **Yes — the circuit fails to oscillate when $C_L$ becomes arbitrarily large.**\n\nThe enormous capacitor attenuates the output of Stage 1 to zero at any finite frequency, driving the loop gain $|L| \\to 0$, which violates the gain condition $|L| \\geq 1$. While the phase condition can still be satisfied (at $\\omega \\approx \\omega_p$), oscillation ceases once the loop gain falls below unity.",
        "format": "markdown",
        "sha256": "ccc16f0fe35e7f122f395ac60d2a6122885e9186086c668056ee1889146ac207"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that an arbitrarily large capacitor on one node creates a dominant low-frequency pole, driving loop gain below unity at the phase-crossover frequency and preventing sustained oscillation. The stated frequency and gain trends are consistent with that mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1317,
        "output_tokens": 11460,
        "total_tokens": 12777,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1317,
        "output_tokens": 11460,
        "total_tokens": 12777,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Effect of Doubling Transistor Widths on Ring Oscillator Phase Noise\n\n## Circuit Analysis\n\nThe figure shows a **3-stage CMOS inverter ring oscillator**, where each stage has a PMOS pull-up and NMOS pull-down transistor.\n\n## Parameter Scaling (W → 2W)\n\n| Parameter | Scaling | Reason |\n|-----------|---------|--------|\n| $g_m$ | $\\times 2$ | $g_m \\propto W$ |\n| $I_{DS}$ | $\\times 2$ | $I_D \\propto W$ |\n| $C_{node}$ | $\\times 2$ | All gate/junction caps $\\propto W$ |\n| $V_{swing}$ | $\\times 1$ | Still swings rail-to-rail ($V_{DD}$) |\n\n**Oscillation frequency** (unchanged):\n$$t_d \\propto \\frac{C_{node}}{I_{DS}} \\xrightarrow{W\\to 2W} \\frac{2C}{2I} = \\frac{C}{I} \\quad \\Rightarrow \\quad f_0 \\text{ unchanged}$$\n\n## Phase Noise Calculation (ISF Model)\n\n$$\\mathcal{L}(\\Delta\\omega) = \\frac{\\Gamma_{rms}^2}{2\\,q_{max}^2}\\cdot\\frac{\\overline{i_n^2}}{\\Delta\\omega^2}$$\n\n**After doubling W:**\n- **Noise current**: $\\overline{i_n^2} = 4kT\\gamma g_m \\;\\Rightarrow\\; \\times 2$\n- **Maximum charge**: $q_{max} = C_{node}\\cdot V_{DD} \\;\\Rightarrow\\; \\times 2$, so $q_{max}^2 \\;\\Rightarrow\\; \\times 4$\n- **ISF ($\\Gamma_{rms}$)**: unchanged (same waveform shape/timing)\n\n$$\\frac{\\mathcal{L}_{new}}{\\mathcal{L}_{old}} = \\frac{\\times 2}{\\times 4} = \\frac{1}{2}$$\n\n## Result\n\n$$\\boxed{\\text{Phase noise improves by } 3\\text{ dB}}$$\n\n**Physical interpretation:** Doubling W is equivalent to running two identical oscillators in parallel. The noise power doubles, but the charge-handling capacity ($q_{max}$) also doubles, so the phase-noise-to-carrier ratio is halved. The cost is **doubled power consumption** — a classic noise vs. power trade-off in oscillator design.",
        "format": "markdown",
        "sha256": "d2d513d058d4e1c6b14f09bbddf082f046a25ec815d01a0f9da528484d08d26d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling all device widths reduces phase noise by about 3 dB and gives a valid scaling explanation: noise current power doubles while the squared signal charge quadruples.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1587,
        "output_tokens": 4608,
        "total_tokens": 6195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3957,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1587,
        "output_tokens": 4608,
        "total_tokens": 6195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3957,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis: Doubling NMOS and PMOS Widths in a Ring Oscillator\n\n### Effect on Oscillation Frequency\n\nWhen all device widths are doubled (W → 2W):\n\n| Parameter | Scaling |\n|-----------|---------|\n| Drive current $I_D \\propto W$ | **×2** |\n| Load capacitance $C_L \\propto W$ | **×2** |\n| Propagation delay $t_p \\propto C_L/I_D$ | **×1 (unchanged)** |\n| Oscillation frequency $f_0 = 1/(2N t_p)$ | **×1 (unchanged)** |\n\n---\n\n### Effect on Phase Noise (Hajimiri ISF Model)\n\nUsing the linear time-variant model:\n\n$$\\mathcal{L}(\\Delta\\omega) \\propto \\frac{\\overline{i_n^2/\\Delta f} \\cdot \\Gamma_\\text{rms}^2}{2\\,q_\\text{max}^2\\,\\Delta\\omega^2}$$\n\nAfter doubling widths:\n\n- **Noise current** (thermal): $\\overline{i_n^2} = 4kT\\gamma g_m$, and $g_m \\propto W$, so $\\overline{i_n^2} \\rightarrow 2\\overline{i_n^2}$\n- **Maximum charge**: $q_\\text{max} = C_L V_{DD} \\rightarrow 2q_\\text{max}$\n- **ISF** ($\\Gamma_\\text{rms}$): waveform shape unchanged → constant\n\n$$\\mathcal{L}_\\text{new} \\propto \\frac{2\\,\\overline{i_n^2}}{2\\,(2q_\\text{max})^2} = \\frac{2\\,\\overline{i_n^2}}{8\\,q_\\text{max}^2} = \\frac{1}{2}\\cdot\\mathcal{L}_\\text{orig}$$\n\n---\n\n### Result\n\n> **The phase noise improves by 3 dB.**\n\nThe intuition: doubling W **doubles the power** ($P \\propto C_L f_0 V_{DD}^2 \\propto W$) while frequency stays constant, so the increased power directly buys 3 dB of phase noise improvement—consistent with the well-known oscillator trade-off between power and phase noise.",
        "format": "markdown",
        "sha256": "d313056b6153b36ccd75eb7c5e445e04d9a9460338d4b5edde0b858dea212bd0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes about a 3 dB phase-noise reduction and gives a consistent scaling argument: noise current power doubles while signal charge doubles, yielding half the noise-to-signal ratio. The power tradeoff is also correctly identified.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1587,
        "output_tokens": 5993,
        "total_tokens": 7580,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5382,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1587,
        "output_tokens": 5993,
        "total_tokens": 7580,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5382,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis: Doubling NMOS and PMOS Widths in a 3-Stage Ring Oscillator\n\n### Effect on Key Parameters\n\nWhen both $W_n$ and $W_p$ are doubled (with $L$, $V_{DD}$ fixed):\n\n| Parameter | Scaling | Reason |\n|-----------|---------|--------|\n| Drain current $I_D$ | $\\times 2$ | $I_D \\propto W/L \\cdot (V_{GS}-V_{th})^2$ |\n| Transconductance $g_m$ | $\\times 2$ | $g_m = \\mu C_{ox}(W/L)(V_{GS}-V_{th})$ |\n| Node capacitance $C_{node}$ | $\\times 2$ | Gate + drain caps $\\propto W$ |\n| Propagation delay $\\tau_{pd} \\propto C_{node}/I_D$ | $\\times 1$ | Both double → unchanged |\n| **Oscillation frequency $f_0$** | **unchanged** | $f_0 = 1/(2N\\tau_{pd})$ |\n| Power $P = V_{DD} \\cdot I_{total}$ | $\\times 2$ | $I_D$ doubles |\n\n### Phase Noise Calculation (ISF Framework)\n\nUsing the Hajimiri–Lee ISF model:\n\n$$\\mathcal{L}\\{\\Delta\\omega\\} \\propto \\frac{\\Gamma_{rms}^2 \\cdot \\overline{i_n^2}}{q_{max}^2 \\cdot \\Delta\\omega^2}$$\n\n**After doubling widths:**\n\n$$\\overline{i_n^2} = 4kT\\gamma g_m \\;\\xrightarrow{W\\to 2W}\\; 2\\overline{i_n^2}$$\n\n$$q_{max} = C_{node}\\cdot V_{DD} \\;\\xrightarrow{W\\to 2W}\\; 2\\, q_{max} \\implies q_{max}^2 \\to 4\\,q_{max}^2$$\n\n$$\\Gamma_{rms} \\to \\text{unchanged} \\quad \\text{(same waveform shape, same }V_{DD}\\text{, same }f_0\\text{)}$$\n\nTherefore:\n\n$$\\mathcal{L}_{new} \\propto \\frac{2\\,\\overline{i_n^2}}{4\\,q_{max}^2} = \\frac{1}{2}\\,\\mathcal{L}_{old}$$\n\n### Result\n\n> **Phase noise improves by 3 dB** at the cost of 2× power consumption.\n\nThis reflects the universal ring-oscillator tradeoff:\n\n$$\\mathcal{L}\\{\\Delta\\omega\\} \\propto \\frac{1}{W} \\propto \\frac{1}{P} \\quad \\text{(at fixed }V_{DD},\\, f_0\\text{)}$$\n\nScaling up devices provides more charge swing ($q_{max}^2 \\propto W^2$) faster than it increases noise ($\\overline{i_n^2} \\propto W$), yielding a net 3 dB phase noise reduction.",
        "format": "markdown",
        "sha256": "ba914784f0cfb99d463c3e281f0f96afb01d76402b8874d6ab5125bba0d0ce82"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts a 3 dB phase-noise reduction and gives the valid scaling argument: device noise power doubles while signal charge doubles, reducing the noise-to-signal ratio by half.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1587,
        "output_tokens": 6007,
        "total_tokens": 7594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1587,
        "output_tokens": 6007,
        "total_tokens": 7594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Small-Signal Resistance at the Supply Node of a Ring Oscillator\n\n## Setting Up the Small-Signal Model\n\nI apply a test voltage $v_x$ at the shared VDD supply node and find $R_X = v_x/i_x$.\n\n**Node labeling:**\n- Stage 1: input $v_1$, output $v_2$  \n- Stage 2: input $v_2$, output $v_3$  \n- Stage 3: input $v_3$, output $v_1$ (ring feedback)\n\nFor each CMOS inverter stage $k$, the PMOS has its **source at $v_x$** and the NMOS has its **source at GND**.\n\n## KCL at Each Stage Output\n\nEquating PMOS supply current to NMOS sink current at output $v_{k+1}$:\n\n$$\\underbrace{g_{mp}(v_x - v_k) + \\frac{v_x - v_{k+1}}{r_{op}}}_{\\text{PMOS (VDD→output)}} = \\underbrace{g_{mn}v_k + \\frac{v_{k+1}}{r_{on}}}_{\\text{NMOS (output→GND)}}$$\n\nDefining $a = g_{mp} + 1/r_{op}$, $b = g_{mn} + 1/r_{on}$, $G = g_{mp}+g_{mn}$, $D = 1/r_{op}+1/r_{on}$:\n\n$$G\\cdot v_k + D\\cdot v_{k+1} = a\\cdot v_x \\qquad (k = 1,2,3)$$\n\n## Solving the Cyclic System\n\nThe three cyclic equations have the **unique symmetric solution**:\n\n$$v_1 = v_2 = v_3 = v = \\frac{a \\cdot v_x}{a + b}$$\n\n## Computing the Supply Current\n\nFor each stage, the current drawn from VDD:\n\n$$i_k = \\left(g_{mp} + \\frac{1}{r_{op}}\\right)(v_x - v) = a\\left(v_x - \\frac{a\\, v_x}{a+b}\\right) = \\frac{ab}{a+b}\\,v_x$$\n\nSumming over all **three identical stages**:\n\n$$i_x = \\frac{3ab}{a+b}\\,v_x$$\n\n## Result\n\n$$\\boxed{R_X = \\frac{v_x}{i_x} = \\frac{a+b}{3ab} = \\frac{1}{3}\\left[\\frac{1}{g_{mp}+\\dfrac{1}{r_{op}}} + \\frac{1}{g_{mn}+\\dfrac{1}{r_{on}}}\\right]}$$\n\n**Interpretation:** Each stage contributes a resistance $(1/a + 1/b)$ to the supply; three parallel stages reduce this by 3.\n\n**Simplification** (for $g_m \\gg 1/r_o$):\n\n$$R_X \\approx \\frac{g_{mn}+g_{mp}}{3\\, g_{mn}\\, g_{mp}}$$\n\nFor a symmetric design ($g_{mn} = g_{mp} = g_m$):  $R_X \\approx \\dfrac{2}{3g_m}$",
        "format": "markdown",
        "sha256": "2f350a2a360f60b497844d4090b99a7e8e43d5062b56541c7ecdafc04606fe5a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static gm-based derivation is internally consistent, but it ignores the oscillation-driven charging and discharging of the load capacitances, which sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1582,
        "output_tokens": 35639,
        "total_tokens": 37221,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1582,
        "output_tokens": 35639,
        "total_tokens": 37221,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Small-Signal Resistance at the Supply Node\n\n### Setting Up the Small-Signal Model\n\nFor a 3-stage CMOS ring oscillator with identical inverters (PMOS: $g_{mp}$, $r_{op}$; NMOS: $g_{mn}$, $r_{on}$), I apply a test voltage $v_x$ at the supply node and find the resulting current $i_x$.\n\nFor each inverter with input $v_{in}$ and output $v_{out}$, KCL at the output node gives:\n\n$$\\underbrace{g_{mp}(v_x - v_{in}) + \\frac{v_x - v_{out}}{r_{op}}}_{\\text{PMOS current}} = \\underbrace{g_{mn}v_{in} + \\frac{v_{out}}{r_{on}}}_{\\text{NMOS current}}$$\n\nThis yields the inverter transfer relation:\n$$v_{out} = \\underbrace{\\frac{(g_{mp}r_{op}+1)r_{on}}{r_{op}+r_{on}}}_{\\alpha} v_x - \\underbrace{\\frac{(g_{mp}+g_{mn})r_{op}r_{on}}{r_{op}+r_{on}}}_{\\beta} \\cdot v_{in}$$\n\n### Solving the Ring Oscillator Equations\n\nBy symmetry of the 3-stage ring ($v_1 = v_2 = v_3 = v$):\n\n$$v = \\alpha v_x - \\beta v \\implies v = \\frac{\\alpha v_x}{1+\\beta}$$\n\nThis shows **all three internal nodes rise by the same fraction** of the supply perturbation. For symmetric inverters ($g_{mp}=g_{mn}=g_m$, $r_{op}=r_{on}=r_o$): $v = v_x/2$.\n\n### Computing the Supply Current\n\nThe current drawn by each PMOS source from the supply is:\n\n$$i_p = \\left(g_{mp}+\\frac{1}{r_{op}}\\right)(v_x - v) = \\frac{(g_{mp}r_{op}+1)(1+g_{mn}r_{on})}{r_{op}+r_{on}+(g_{mp}+g_{mn})r_{op}r_{on}} \\cdot v_x$$\n\nFor 3 stages in parallel: $i_x = 3i_p$\n\n### Result\n\n$$\\boxed{R_x = \\frac{r_{op}+r_{on}+(g_{mp}+g_{mn})r_{op}r_{on}}{3(1+g_{mp}r_{op})(1+g_{mn}r_{on})} = \\frac{1}{3}\\left[\\frac{1}{g_{mp}+\\frac{1}{r_{op}}}+\\frac{1}{g_{mn}+\\frac{1}{r_{on}}}\\right]}$$\n\n**For $g_m r_o \\gg 1$ (high-gain approximation):**\n$$R_x \\approx \\frac{g_{mp}+g_{mn}}{3\\,g_{mp}\\,g_{mn}}$$\n\n**For symmetric inverters** ($g_{mp}=g_{mn}=g_m$):\n$$R_x \\approx \\frac{2}{3g_m}$$\n\n### Physical Interpretation\n\nThe factor of **1/3** reflects three identical stages in parallel. The factor of **2** (vs. the naive $1/(3g_{mp})$) arises because the ring feedback causes each internal node to track the supply perturbation at half-amplitude ($v = v_x/2$), reducing the PMOS driving force by half and effectively doubling the apparent resistance compared to isolated stages.",
        "format": "markdown",
        "sha256": "e4a4cea4ee3e4769fe25464f2de94666a7f084fc001bef702211b8518c349305"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static gm-based derivation is internally consistent, but it ignores the oscillation-driven charging and discharging of the load capacitances that dominate the supply resistance. It therefore misses the required result, approximately 1/(3 f0 CL) (or a frequency-dependent refinement).",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1582,
        "output_tokens": 33438,
        "total_tokens": 35020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1582,
        "output_tokens": 33438,
        "total_tokens": 35020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Small-Signal Supply Resistance of a 3-Stage CMOS Ring Oscillator\n\n## Setting Up the Problem\n\nApplying a test voltage $v_x$ at the supply node, I need to find $R_x = v_x/i_x$, where $i_x$ flows into the supply.\n\n**Label the nodes:** Let $v_a$, $v_b$, $v_c$ denote the outputs of stages 1, 2, and 3 respectively (connected in a ring: $v_c \\to$ input of stage 1, etc.).\n\n## KCL at Each Internal Node\n\nFor **Stage 1** (input = $v_a$, output = $v_b$), with the PMOS source at $v_x$:\n\n$$\\underbrace{g_{mp}(v_a - v_x) + \\frac{v_b - v_x}{r_{op}}}_{\\text{PMOS drain current}} + \\underbrace{g_{mn}v_a + \\frac{v_b}{r_{on}}}_{\\text{NMOS drain current}} = 0$$\n\nDefining $A = g_{mn}+g_{mp}$, $B = 1/r_{on}+1/r_{op}$, $C = g_{mp}+1/r_{op}$:\n\n$$A\\,v_a + B\\,v_b = C\\,v_x \\tag{1}$$\n\nBy symmetry, the system yields two more cyclic equations. This circulant system has the **unique symmetric solution**:\n\n$$\\boxed{v_a = v_b = v_c = \\frac{C\\,v_x}{A+B}}$$\n\n## Computing the Supply Current\n\nFor each PMOS transistor, the small-signal drain current is:\n\n$$i_{d,p} = C\\,(v_0 - v_x) = C\\cdot v_x\\cdot\\frac{C - A - B}{A+B}$$\n\nSince $A + B - C = g_{mn} + 1/r_{on}$, the current flowing **from supply into** each PMOS source is:\n\n$$i_s = -i_{d,p} = \\frac{C\\,(g_{mn}+1/r_{on})}{A+B}\\,v_x$$\n\nThe total test current for 3 stages:\n\n$$i_x = 3\\,i_s = \\frac{3\\,(g_{mp}+1/r_{op})(g_{mn}+1/r_{on})}{g_{mn}+g_{mp}+1/r_{on}+1/r_{op}}\\,v_x$$\n\n## Result\n\n$$\\boxed{R_x = \\frac{1}{3}\\left(\\frac{1}{g_{mn}+1/r_{on}} + \\frac{1}{g_{mp}+1/r_{op}}\\right)}$$\n\n**For $g_m r_o \\gg 1$** (practical approximation):\n\n$$R_x \\approx \\frac{1}{3}\\!\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right) = \\frac{g_{mn}+g_{mp}}{3\\,g_{mn}\\,g_{mp}}$$\n\n## Physical Interpretation\n\n| Contribution | Value |\n|:---:|:---:|\n| Each PMOS (sources current) | $1/g_{mp}$ |\n| Each NMOS (sinks current) | $1/g_{mn}$ |\n| Three stages in parallel | $\\div\\,3$ |\n\nThe supply \"sees\" three identical paths in parallel, each formed by the PMOS transconductance resistance ($1/g_{mp}$) in series with the NMOS transconductance resistance ($1/g_{mn}$).",
        "format": "markdown",
        "sha256": "be5e43ca2d5f3573948ce4b52e1569c5b96a26a26d6f801d5c9c70d0de021c72"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The derivation is internally consistent for a static small-signal operating point, but it misses the dominant oscillation-driven charging and discharging of the load capacitances. The resulting gm-based resistance is the specific static-only answer the golden solution assigns a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1582,
        "output_tokens": 36691,
        "total_tokens": 38273,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35763,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1582,
        "output_tokens": 36691,
        "total_tokens": 38273,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35763,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Does RX Change When the Oscillator Is Running?\n\n**Yes — the formula changes significantly when the circuit oscillates.**\n\n---\n\n### Why the Original Analysis Breaks Down\n\nThe derivation assumes every inverter sits at the **unstable equilibrium** (all nodes at $V_{DD}/2$), so $v_{in} = v_{out}$ for each stage. Under this condition:\n\n- Both PMOS and NMOS are **simultaneously in saturation**\n- Each device appears diode-connected → resistance from supply to GND per inverter $= \\tfrac{1}{g_{mp}} + \\tfrac{1}{g_{mn}}$\n- Three in parallel → $R_X = \\tfrac{1}{3}\\!\\left(\\tfrac{1}{g_{mp}} + \\tfrac{1}{g_{mn}}\\right)$ ✓\n\nThe $\\tfrac{1}{g_{mn}}$ term arises from an indirect feedback: supply ↑ → PMOS sources more current → output rises → NMOS draws more current, partially canceling the effect. This \"series\" action requires both devices **on simultaneously**.\n\n---\n\n### What Changes During Oscillation\n\n| Condition | PMOS state | NMOS state | Feedback mechanism |\n|-----------|-----------|-----------|-------------------|\n| Equilibrium ($v_{in}=v_{out}$) | In saturation | In saturation | Full NMOS cancellation → $\\tfrac{1}{g_{mp}}+\\tfrac{1}{g_{mn}}$ |\n| Oscillating (output HIGH) | Fully ON (triode) | **OFF** | No NMOS cancellation |\n| Oscillating (output LOW) | **OFF** | Fully ON | No supply current at all |\n\nBecause of **complementary CMOS switching**, the NMOS is *off* precisely when the PMOS is sourcing supply current. The NMOS cancellation effect disappears, eliminating the $\\tfrac{1}{g_{mn}}$ feedback term.\n\n---\n\n### The 3-Phase Symmetry Argument\n\nIn steady-state oscillation the three output nodes carry **equal amplitudes at 120° spacing**:\n\n$$i_{supply}(\\omega_0) = i_{p1} + i_{p2} + i_{p3} \\;\\propto\\; e^{j0} + e^{j2\\pi/3} + e^{j4\\pi/3} = 0$$\n\nThe fundamental supply-current ripple at $\\omega_0$ **cancels identically** (3-phase balance). Ripple only appears at $3\\omega_0, 6\\omega_0, \\ldots$ This is fundamentally incompatible with the diode-connected model, which predicts finite conductance at all frequencies.\n\n---\n\n### Bottom Line\n\nThe formula $R_X \\approx \\tfrac{1}{3}\\!\\left(\\tfrac{1}{g_{mn}}+\\tfrac{1}{g_{mp}}\\right)$ is valid only for a small-signal perturbation around the **unstable equilibrium**. Once the circuit is actually oscillating:\n\n- The diode-connected approximation ($v_{in}=v_{out}$) fails\n- Complementary switching removes the NMOS series contribution\n- 3-phase cancellation makes the supply impedance at $\\omega_0$ far larger than the formula predicts\n\nA correct treatment requires **periodic small-signal (Floquet) analysis**, giving a frequency-dependent impedance that is generally different from (and higher than) $\\tfrac{1}{3}\\!\\left(\\tfrac{1}{g_{mn}}+\\tfrac{1}{g_{mp}}\\right)$.",
        "format": "markdown",
        "sha256": "c758451af8e508c49bd41e2557be4e408cf49d8385e5303f641d981f29d153de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the static diode-connected analysis does not describe the oscillating circuit, but reaches the opposite of the key result: it claims RX becomes much higher because devices are off. The dominant effect is charging and discharging node capacitances, which keeps RX on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1676,
        "output_tokens": 54879,
        "total_tokens": 56555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 54015,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1676,
        "output_tokens": 54879,
        "total_tokens": 56555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 54015,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Does the Formula Change During Oscillation?\n\n**Yes, the formula changes significantly when the circuit oscillates.**\n\n---\n\n### Why the Static Formula Works (Non-Oscillating)\n\nThe formula $R_X \\approx \\frac{1}{3}\\!\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)$ assumes the circuit sits at the **DC equilibrium** ($V_{in} = V_{out} = V_{DD}/2$ for each inverter), where:\n\n- Both NMOS and PMOS are **simultaneously in saturation**\n- Each NMOS and PMOS looks like a diode-connected device\n- They form a series path VDD → PMOS → NMOS → GND per inverter\n- Three inverters in parallel give the factor of $\\frac{1}{3}$\n\n---\n\n### What Changes During Oscillation\n\nDuring large-swing oscillation, the transistors **switch in a complementary fashion** — they never conduct simultaneously:\n\n| Inverter State | PMOS | NMOS | Path from V$_{DD}$ |\n|---|---|---|---|\n| Input LOW | **ON** | off | V$_{DD}$ → PMOS → output cap (NMOS blocks GND) |\n| Input HIGH | off | **ON** | **Blocked** (PMOS off) |\n\nThe key point: **the series PMOS–NMOS path from V$_{DD}$ to GND never simultaneously exists** during large-swing operation.\n\n---\n\n### Revised Estimate for the Oscillating Case\n\nWith three inverters phased 120° apart and ~50% duty cycle, on average $\\tfrac{3}{2}$ inverters have their PMOS conducting at any instant. Each conducting PMOS contributes transconductance $g_{mp}$ to the supply admittance:\n\n$$\\boxed{R_X^{\\text{osc}} \\approx \\frac{2}{3\\, g_{mp}}}$$\n\nThis depends **only on $g_{mp}$**, not on $g_{mn}$, because the NMOS transistors discharge capacitors to GND and have no direct path to V$_{DD}$ during their on-phase.\n\n---\n\n### Comparison\n\n$$R_X^{\\text{static}} = \\frac{1}{3}\\!\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right), \\qquad R_X^{\\text{osc}} \\approx \\frac{2}{3\\,g_{mp}}$$\n\nFor typical CMOS where $g_{mn} > g_{mp}$, we find $R_X^{\\text{osc}} > R_X^{\\text{static}}$, since the full VDD-to-GND resistive path is never complete during switching. The original formula **underestimates** $R_X$ during oscillation.",
        "format": "markdown",
        "sha256": "9d4a04df814fc5d43153d40e3884bfa44af42d65cfcbe51066c91a4408ee0992"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that oscillation makes RX much higher and estimates it from the fraction of time PMOS devices conduct. This misses the dominant capacitive charging mechanism, which keeps RX on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1676,
        "output_tokens": 19481,
        "total_tokens": 21157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18790,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1676,
        "output_tokens": 19481,
        "total_tokens": 21157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18790,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Does R_X Change During Oscillation?\n\n**Yes — the formula changes fundamentally when the circuit oscillates.**\n\n---\n\n### Why the Original Formula Assumed What It Did\n\nThe derivation RX ≈ (1/3)(1/g_mn + 1/g_mp) is based on the **unstable DC equilibrium** where all three nodes sit at V_DD/2. At this operating point:\n\n- Every MOSFET operates in **saturation** with V_gs = V_DS = V_DD/2\n- Since all node voltages are equal (V_in = V_out = V_DD/2), each transistor's gate equals its drain → valid diode-connected model\n- Both PMOS and NMOS carry current simultaneously in each inverter → true series connection\n\nThe resulting KCL at any node gives v₁ = v₂ = v₃ = g_mp·v_x/(g_mp + g_mn), yielding the stated formula.\n\n---\n\n### What Changes During Oscillation\n\nWhen the ring actually oscillates, the nodes swing rail-to-rail (0 → V_DD). At any instant, in each inverter:\n\n| State | PMOS | NMOS | V_in |\n|-------|------|------|------|\n| Output HIGH | **ON** (triode, V_SD ≈ 0) | **OFF** | ≈ 0 |\n| Output LOW | **OFF** | **ON** (triode, V_DS ≈ 0) | ≈ V_DD |\n\nTwo critical consequences follow:\n\n**1. Series model breaks down.** The \"two diode-connected devices in series\" picture requires *both* transistors conducting simultaneously. During oscillation they never both conduct — the formula loses its serial 1/g_mn + 1/g_mp structure.\n\n**2. PMOS g_m is larger when fully ON.** When the PMOS gate is pulled to 0 V:\n\n$$g_{m,\\text{on}} = \\mu_p C_{ox}\\frac{W}{L}(V_{DD} - |V_{tp}|) \\gg g_{mp} = \\mu_p C_{ox}\\frac{W}{L}\\!\\left(\\frac{V_{DD}}{2} - |V_{tp}|\\right)$$\n\nThe effective transconductance is roughly **2–3× larger** than the value at V_DD/2.\n\n---\n\n### Net Effect\n\nSince only the PMOS transistors provide current from V_DD (the NMOS sources connect to GND, not V_DD), and at any moment only 1–2 out of 3 PMOS transistors are active:\n\n$$R_X^{\\text{osc}} \\approx \\frac{1}{\\langle N_{\\text{on}}\\rangle \\cdot g_{m,\\text{on}}}$$\n\nThis differs from the DC formula in **both structure** (no 1/g_mn term from direct V_DD contribution) and **magnitude** (larger effective g_m reduces R_X).\n\nThe original formula R_X ≈ (1/3)(1/g_mn + 1/g_mp) **is not valid during oscillation**.",
        "format": "markdown",
        "sha256": "1edc0f40f22bf37745d9b5e672308b8eae15d6d9f4b2804c6d59ea06d4cd8e33"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the static derivation does not apply unchanged during oscillation, but misses the dominant capacitive charging and discharging mechanism and incorrectly predicts a lower resistance from counting active PMOS devices. The oscillating resistance remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1676,
        "output_tokens": 37664,
        "total_tokens": 39340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1676,
        "output_tokens": 37664,
        "total_tokens": 39340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Initial Voltage Gain vs. M7 Width\n\n### Role of M7 in the Circuit\n\nM7 is the NMOS tail current transistor activated during the evaluation phase (CK = high). Operating in saturation:\n\n$$I_{SS} = \\frac{1}{2}\\mu_n C_{ox}\\frac{W_7}{L_7}(V_{CK} - V_{TN})^2 \\propto W_7$$\n\n### Small-Signal Analysis During Initial Evaluation\n\nApplying the differential half-circuit theorem (M7 → AC open for differential mode), KCL at nodes P and X yields:\n\n$$C\\frac{dv_d}{dt} = g_{m5}\\cdot v_d - g_{m1}\\cdot v_{id}$$\n\nAt **t = 0⁺** (before regeneration engages, $v_d \\approx 0$):\n\n$$\\boxed{\\left.\\frac{dv_d}{dt}\\right|_{t=0} = -\\frac{g_{m1}}{C}\\cdot v_{id}}$$\n\nThe initial voltage gain scales as:\n\n$$A_{v,\\text{initial}} \\propto \\frac{g_{m1}}{C} \\propto \\frac{\\sqrt{I_{SS}}}{C} \\propto \\frac{\\sqrt{W_7}}{C}$$\n\n### Effect of Increasing W₇\n\n| Parameter | Relationship | Effect |\n|-----------|-------------|--------|\n| $I_{SS}$ | $\\propto W_7$ | ↑ increases |\n| $g_{m1,2}$ | $\\propto \\sqrt{I_{SS}} \\propto \\sqrt{W_7}$ | ↑ increases |\n| Initial gain rate $g_{m1}/C$ | $\\propto \\sqrt{W_7}$ | ↑ increases |\n\n### Conclusion\n\n**The initial voltage gain increases** as $W_7$ increases ($\\propto \\sqrt{W_7}$).\n\n> **Physical intuition:** A wider M7 delivers more tail current → larger transconductance $g_{m1,2}$ for the input pair M1/M2 → the differential input voltage $V_{id}$ is converted more efficiently into a differential current injected into the cross-coupled load → faster initial output voltage divergence per unit input.",
        "format": "markdown",
        "sha256": "98a2fbb407c5e1c9441974ca54652f6f944f5c80a130e47fc977f33154e59eb7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the essential conclusion: initial gain decreases as M7 widens. It correctly notes that tail current and input-pair gm increase, but incorrectly treats the instantaneous output slope gm/C as the initial voltage gain and misses that the relevant gain factor gm/ICM decreases.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1602,
        "output_tokens": 43418,
        "total_tokens": 45020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1602,
        "output_tokens": 43418,
        "total_tokens": 45020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Initial Voltage Gain vs. M7 Width\n\n### Circuit Operation Overview\n\nDuring evaluation (CK = high), M7 activates as the tail current source for the input differential pair (M1–M2). The output nodes X and Y discharge from V_DD through the M3–M1 and M4–M2 series paths before the PMOS cross-coupled pair (M5–M6) engages.\n\n### Two-Phase Linear Analysis\n\n**Phase 1 (Linear/Preamplification phase):**\n\nThe common-mode discharge current at each output node is approximately $I_T/2$, so the duration until M5–M6 begin to engage is:\n\n$$T_1 = \\frac{C_X \\cdot |\\Delta V_{TH}|}{I_T/2} \\propto \\frac{1}{W_7}$$\n\nwhere $|\\Delta V_{TH}| = |V_{tp}|$ (PMOS turn-on threshold), and $I_T \\propto W_7$.\n\n**Differential output built up during Phase 1:**\n\nThe differential rate of output voltage change is driven by the input transconductance:\n\n$$\\frac{d(\\Delta V_{out})}{dt} = \\frac{g_{m1}}{C_X}\\cdot\\Delta V_{in}$$\n\nIntegrating over $T_1$:\n\n$$\\boxed{A_{initial} = \\frac{g_{m1} \\cdot T_1}{C_X} = \\frac{2\\,g_{m1}\\cdot|\\Delta V_{TH}|}{I_T}}$$\n\n### Dependence on M7 Width\n\n| Parameter | Scaling with $W_7$ |\n|-----------|-------------------|\n| $I_T$ | $\\propto W_7$ |\n| $g_{m1} = \\sqrt{2\\mu_n C_{ox}(W_1/L_1)(I_T/2)}$ | $\\propto \\sqrt{W_7}$ |\n| $T_1 \\propto 1/I_T$ | $\\propto 1/W_7$ |\n| $A_{initial} \\propto g_{m1}/I_T$ | $\\propto 1/\\sqrt{W_7}$ |\n\nExplicitly:\n\n$$A_{initial} = \\frac{2|\\Delta V_{TH}|}{V_{GS1}-V_{th}} \\propto \\frac{1}{\\sqrt{W_7}}$$\n\n### Result\n\nAs $W_7$ increases, $I_T$ grows faster than $g_{m1}$, shortening Phase 1 more than it boosts transconductance. Therefore:\n\n> **The initial voltage gain decreases** as the width of M7 increases (∝ $1/\\sqrt{W_7}$).\n\nThis reflects the classic speed–gain tradeoff in dynamic comparators: a wider M7 makes decisions **faster** (smaller $T_1$) but provides **less preamplification** before regeneration, reducing the initial voltage gain.",
        "format": "markdown",
        "sha256": "38e59cb22e5e8c31686e4210171375e87e419f5abe7f31e1bf4f3858ad7d1ea1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that initial gain decreases as M7 widens and explains that tail current rises faster than input-pair transconductance, reducing the gain factor gm/ICM. The detailed formula is not required.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1602,
        "output_tokens": 83574,
        "total_tokens": 85176,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 82838,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1602,
        "output_tokens": 83574,
        "total_tokens": 85176,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 82838,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Initial Voltage Gain vs. M7 Width\n\n### Role of M7 in This Circuit\n\nM7 is the NMOS tail-current switch (gate = CK) that sources the differential pair M1–M2 during the evaluation phase. Its drain current sets the common bias point for the entire latch:\n\n$$I_\\text{tail} = \\frac{1}{2}\\mu_n C_{ox}\\frac{W_7}{L_7}(V_{GS7} - V_{th})^2 \\propto W_7$$\n\n### Initial Gain Expression\n\nDuring the initial linear phase (before PMOS cross-couple M5–M6 turn on), the small-signal differential gain reduces to the **intrinsic gain of M1**:\n\n$$\\boxed{A_{v,\\text{initial}} \\approx g_{m1} \\cdot r_{o1} = \\frac{g_{m1}}{g_{ds1}} = \\frac{2V_A}{V_{ov1}}}$$\n\n### How W7 Affects Each Parameter\n\n| Parameter | Dependence on $W_7$ | Trend |\n|-----------|---------------------|-------|\n| $I_{D1} = I_\\text{tail}/2$ | $\\propto W_7$ | ↑ |\n| $g_{m1} = \\sqrt{2\\mu_nC_{ox}(W_1/L_1)I_{D1}}$ | $\\propto \\sqrt{W_7}$ | ↑ |\n| $g_{ds1} = \\lambda I_{D1}$ | $\\propto W_7$ | ↑ faster |\n| $V_{ov1} = \\sqrt{2I_{D1}/(\\mu_n C_{ox} W_1/L_1)}$ | $\\propto \\sqrt{W_7}$ | ↑ |\n\n### Net Effect on Gain\n\n$$A_{v,\\text{initial}} = \\frac{g_{m1}}{g_{ds1}} \\propto \\frac{\\sqrt{W_7}}{W_7} = \\frac{1}{\\sqrt{W_7}}$$\n\n### Conclusion\n\n**The initial voltage gain decreases as $W_7$ increases** (∝ $1/\\sqrt{W_7}$).\n\nPhysically: a wider M7 pushes more tail current through M1–M2, increasing their overdrive voltage $V_{ov}$. Since the intrinsic gain $= 2V_A/V_{ov}$ falls with rising $V_{ov}$, the gain drops even though the transconductance grows — the output conductance $g_{ds}$ scales with current *faster* than $g_m$ does.\n\n> **Trade-off:** Increasing $W_7$ improves **speed** (larger $g_m$ → faster slew) at the cost of reduced **initial linear gain**. The latch compensates with faster regeneration rather than a larger initial seed voltage.",
        "format": "markdown",
        "sha256": "f5873cd63bd034647fbe985e7247ba91fcc6c31da642fd85d003e3c0b6df9e10"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The decreasing trend and increased tail current are correct, but the answer incorrectly identifies the comparator’s initial integration gain as the input transistor’s intrinsic gain, gm·ro. It therefore misses the relevant gm/ICM or integration-time mechanism, despite reaching the right conclusion.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1602,
        "output_tokens": 35896,
        "total_tokens": 37498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35172,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1602,
        "output_tokens": 35896,
        "total_tokens": 37498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35172,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Initial Voltage Gain vs. Capacitance at Nodes P and Q\n\n### Circuit Operation (Evaluation Phase)\n\nWhen CK goes high, M7 turns on and M1/M2 begin discharging nodes P and Q. Since P and Q were reset to V_DD (via S₁ and S₂), the cross-coupled transistors M3/M4 are **initially OFF** (V_gs = V_DD − V_DD = 0).\n\n### Stage 1: Differential Discharge of P and Q\n\nWith tail current I_T and input differential ΔV_in:\n\n$$V_P(t) \\approx V_{DD} - \\frac{I_T/2 + g_m\\Delta V_{in}/2}{C_{P,Q}}\\cdot t$$\n\n$$V_Q(t) \\approx V_{DD} - \\frac{I_T/2 - g_m\\Delta V_{in}/2}{C_{P,Q}}\\cdot t$$\n\n**Differential signal at P, Q:**\n$$V_P(t) - V_Q(t) = -\\frac{g_m \\cdot \\Delta V_{in}}{C_{P,Q}} \\cdot t$$\n\n### Onset of Regeneration (M3/M4 Turn On)\n\nM3 turns on when $V_{gs3} = V_{th3}$, i.e., when the common-mode of P,Q falls by $V_{th3}$:\n\n$$t_1 = \\frac{2\\,C_{P,Q}\\cdot V_{th3}}{I_T}$$\n\n### Initial Voltage Gain Calculation\n\nSubstituting $t_1$ into the differential expression:\n\n$$\\boxed{A_{v,\\text{initial}} = \\frac{V_P(t_1) - V_Q(t_1)}{\\Delta V_{in}} = \\frac{2\\,g_{m1,2}\\cdot V_{th3,4}}{I_T}}$$\n\n### Key Result\n\n| Factor | Dependence on $C_{P,Q}$ |\n|--------|------------------------|\n| Rate of gain buildup | $\\propto 1/C_{P,Q}$ (slower) |\n| Time until regeneration | $\\propto C_{P,Q}$ (longer) |\n| **Net initial gain** | **Cancels → Independent** |\n\n**The initial voltage gain remains unchanged.** A larger capacitance slows the signal buildup per unit time, but it equally delays the onset of regeneration — these effects cancel exactly, leaving the total accumulated differential gain $A_v = 2g_m V_{th}/I_T$ independent of $C_{P,Q}$.",
        "format": "markdown",
        "sha256": "e390685557c462cc204bac28541b8316b14885f68b6f16338db782610c53dc0d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is unchanged and explains the capacitance cancellation: larger capacitance slows differential buildup but proportionally delays regeneration. The resulting gain expression is independent of capacitance.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1602,
        "output_tokens": 10479,
        "total_tokens": 12081,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1602,
        "output_tokens": 10479,
        "total_tokens": 12081,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Initial Voltage Gain vs. Capacitance at Nodes P and Q\n\n### Circuit Operating Principle\n\nThis is a **double-tail dynamic latch comparator**. When CK goes high:\n- M7 turns on, enabling evaluation\n- Switches S1–S4 open, isolating the latched nodes\n- M1 and M2 (the input differential pair) conduct currents proportional to V_in1 and V_in2\n- Nodes P and Q discharge from their reset values, building up a differential voltage\n\n### Initial Gain Expression\n\nDuring the initial linear evaluation phase, the differential voltage developed at P and Q is governed by:\n\n$$\\frac{d(\\Delta V_{PQ})}{dt} = -\\frac{\\Delta I}{C_{P,Q}} = -\\frac{g_m \\cdot \\Delta V_{in}}{C_{P,Q}}$$\n\nAfter a short evaluation interval $\\Delta t$, the differential voltage at P–Q is:\n\n$$\\boxed{\\Delta V_{PQ} = \\frac{g_m \\cdot \\Delta V_{in} \\cdot \\Delta t}{C_{P,Q}}}$$\n\nThe **initial voltage gain** (from $\\Delta V_{in}$ to $\\Delta V_{PQ}$) is therefore:\n\n$$A_{\\text{initial}} = \\frac{\\Delta V_{PQ}}{\\Delta V_{in}} = \\frac{g_m \\cdot \\Delta t}{C_{P,Q}}$$\n\n### Effect of Increasing C at P and Q\n\n| Capacitance $C_{P,Q}$ | Differential Voltage $\\Delta V_{PQ}$ | Initial Gain $A_{\\text{initial}}$ |\n|---|---|---|\n| Smaller | Larger | **Higher** |\n| **Larger** | **Smaller** | **Lower ↓** |\n\n### Conclusion\n\n**Increasing the capacitance at nodes P and Q reduces the initial voltage gain** (inversely proportional: $A \\propto 1/C_{P,Q}$). Less differential voltage is built up at P–Q during the initial phase, which also gives the downstream regenerative latch (M3–M6) a smaller \"head start,\" ultimately degrading comparator speed and sensitivity.",
        "format": "markdown",
        "sha256": "8c618a3bf91bc8aab71075b978f7e7eb1046104ecbeda144bcdc6909d481087f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the essential result: larger capacitance slows the discharge and lengthens the amplification phase proportionally, so its effect cancels and the initial gain remains approximately unchanged. The answer considers only a fixed-time voltage slope, not the gain by the onset of regeneration.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1602,
        "output_tokens": 3578,
        "total_tokens": 5180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3040,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1602,
        "output_tokens": 3578,
        "total_tokens": 5180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3040,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Effect of Increased Capacitance at Nodes P and Q\n\n### Circuit Operating Principle\n\nDuring the **evaluation phase** (CK goes high):\n- M7 turns on, enabling current flow through M1 and M2\n- The differential input (V_in1 − V_in2) produces a drain current imbalance:\n\n$$\\Delta I = g_{m1,2} \\cdot \\Delta V_{in}$$\n\n- This imbalance charges/discharges the capacitances at nodes P and Q\n\n### Initial Voltage Gain Analysis\n\nThe voltage developed at nodes P and Q after evaluation time $\\Delta t$ is:\n\n$$\\Delta V_{P,Q} = \\frac{\\Delta I \\cdot \\Delta t}{C_{P,Q}} = \\frac{g_m \\cdot \\Delta V_{in} \\cdot \\Delta t}{C_{P,Q}}$$\n\nTherefore, the **initial voltage gain** is:\n\n$$\\boxed{A_{v,\\text{initial}} = \\frac{g_m \\cdot \\Delta t}{C_{P,Q}}}$$\n\n### Conclusion\n\n| Capacitance $C_{P,Q}$ | Initial Gain $A_v$ |\n|---|---|\n| Increases ↑ | **Decreases ↓** |\n\n**Increasing the capacitance at P and Q reduces the initial voltage gain** because:\n- A larger capacitance requires more charge to produce the same voltage swing\n- For the same differential current $\\Delta I$, less voltage difference develops at P and Q within a fixed evaluation window\n- This weakened voltage difference feeds into the cross-coupled regenerative stage (M3/M4, M5/M6) with reduced amplitude, lowering the overall speed and sensitivity of the comparator",
        "format": "markdown",
        "sha256": "1433d1dbdf68a9a9c3f1ad69059c5cd13624fd73f36cd00a9e10066b39ad6083"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the golden answer: the initial gain is essentially unchanged because the longer amplification interval cancels the reduced voltage slope from larger capacitance. The answer correctly notes that capacitance reduces the voltage change over a fixed time, but it mistakes that for the initial gain at regeneration onset.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1602,
        "output_tokens": 2622,
        "total_tokens": 4224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2203,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1602,
        "output_tokens": 2622,
        "total_tokens": 4224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2203,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Effect of Increasing M5 and M6 Widths\n\n### Role of M5 and M6 in the Circuit\n\nM5 and M6 are **cross-coupled PMOS transistors** that form half of the regenerative latch (together with NMOS M3/M4). They contribute to positive feedback at nodes X and Y during the evaluation phase:\n\n- When $V_X < V_Y$: M6 (gate=X, dropping) has larger $V_{SG6}$ → pushes Y up\n- When $V_X < V_Y$: M5 (gate=Y, rising) has smaller $V_{SG5}$ → less pull-up on X → X falls further\n\n### Regeneration Time Constant\n\nThe latch regeneration is governed by:\n\n$$\\boxed{\\tau_{\\text{regen}} = \\frac{C_X}{g_{m5} + g_{m3}}}$$\n\nWhen $W_5, W_6$ are scaled by factor $k$:\n\n| Parameter | Scaling |\n|-----------|---------|\n| $g_{m5}$ (at fixed $I_D$) | $\\propto \\sqrt{W_5}$ (sub-linear) |\n| $C_X$ from M5, M6 ($C_{gs6}$, $C_{gd5}$, $C_{db5}$) | $\\propto W_5$ (linear) |\n\nSince $g_m/C \\propto 1/\\sqrt{W}$ **decreases** as width increases, the extra capacitance added grows faster than the extra transconductance.\n\n### Two Additional Speed Penalties\n\n1. **Kickoff Phase**: Initially M5 and M6 are OFF ($V_{GS} \\approx 0$) — they add no $g_m$ yet their larger gate capacitances ($C_{gs5}$ at node Y, $C_{gs6}$ at node X) slow the initial differential development.\n\n2. **PMOS vs. NMOS gm/C**: PMOS inherently has lower transit frequency:\n$$f_{T,\\text{PMOS}} \\approx \\frac{\\mu_p}{\\mu_n} \\cdot f_{T,\\text{NMOS}} \\approx \\frac{1}{2\\text{–}3}\\,f_{T,\\text{NMOS}}$$\n\nAdding more PMOS area dilutes the effective $g_m/C$ of the combined latch.\n\n### Conclusion\n\n**The speed degrades.** Increasing $W_5$ and $W_6$ adds capacitive loading to nodes X and Y (linearly with $W$), while the gm benefit grows only as $\\sqrt{W}$ at a fixed operating current. Because PMOS has a lower $g_m/C$ ratio than NMOS, the net regeneration time constant $\\tau = C_X/(g_{m5}+g_{m3})$ **increases**, slowing the comparator.",
        "format": "markdown",
        "sha256": "1bd31094a67c81ff3e43cca0fd9179c267dd1a872693832a66988c7c4daccae9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M5/M6 as cross-coupled PMOS devices and notes their added capacitance can eventually limit speed. But it gets the central initial trend wrong: wider devices initially strengthen regeneration enough to improve speed, with degradation possible only beyond an optimum.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1604,
        "output_tokens": 22976,
        "total_tokens": 24580,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22262,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1604,
        "output_tokens": 22976,
        "total_tokens": 24580,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22262,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Increasing M5 and M6 Widths\n\n### Role of M5 and M6 in the Circuit\n\nM5 and M6 are **cross-coupled PMOS transistors** that form the upper regenerative pair of this dynamic latch/comparator. During evaluation (CK high, M7 conducting, switches S1–S4 off), they provide positive feedback to regenerate the differential output at nodes X and Y toward valid logic levels.\n\n---\n\n### Effects of Increasing Their Width\n\n**Benefit – Higher g_m:**\n$$g_{m,p} \\propto W_{5,6}$$\nStronger regenerative positive feedback → faster pull toward V_DD on the winning node.\n\n**Penalty – Higher Capacitance at X and Y:**\n\nEach output node accumulates additional capacitance:\n\n| Added Capacitance | Source |\n|---|---|\n| $C_{db5}, C_{gd5}$ | M5 drain at node X |\n| $C_{gs6}$ | M6 gate (cross-coupled to X) |\n| (symmetric for Y) | |\n\nAll scale **linearly** with $W_{5,6}$.\n\n---\n\n### Net Time-Constant Analysis\n\nThe regeneration time constant is:\n\n$$\\tau_{regen} = \\frac{C_{X,Y}}{g_{m,eff}} = \\frac{C_{\\text{fixed}} + \\alpha W}{g_{m,n} + \\beta W}$$\n\nThe key comparison is the **intrinsic speed** (g_m/C) of PMOS vs. NMOS:\n\n$$\\frac{g_{m,p}}{C_p} \\propto \\mu_p \\quad \\ll \\quad \\frac{g_{m,n}}{C_n} \\propto \\mu_n$$\n\nSince $\\mu_p \\approx 0.4\\,\\mu_n$, every unit of PMOS width adds **more capacitance per unit of regenerative g_m** than the existing NMOS pair (M3/M4) already provides.\n\n---\n\n### Conclusion\n\n> **Speed degrades** when M5 and M6 are made wider.\n\nThe two compounding reasons are:\n1. **Capacitive loading**: Larger M5/M6 increase C at nodes X and Y, extending $\\tau_{regen}$.\n2. **Stronger pull-up opposition**: Wider PMOS fight the differential pull-down from M1/M2 more aggressively during the initial evaluation phase, delaying the development of a valid differential voltage.\n\nThe optimal design sizes M5/M6 just large enough to guarantee full-swing regeneration — oversizing them is counterproductive.",
        "format": "markdown",
        "sha256": "2c38879076baca89328a3e7755198e3e6befaf851009aa98727c1b1ff85cd635"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M5/M6 as regenerative PMOS devices and notes the competing transconductance and capacitance effects, but concludes that widening degrades speed. The key result is that widening initially strengthens regeneration and improves speed; capacitance limits the benefit only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1604,
        "output_tokens": 7719,
        "total_tokens": 9323,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7077,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1604,
        "output_tokens": 7719,
        "total_tokens": 9323,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7077,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Increasing M5 and M6 Widths\n\n### Role of M5 and M6 in the Circuit\n\nM5 and M6 are **cross-coupled PMOS transistors** that form the top half of the regenerative latch (nodes X and Y). Together with the cross-coupled NMOS pair M3/M4, they establish positive feedback during the evaluation phase.\n\n### Competing Effects\n\n**Beneficial effect — increased gm:**\nWider M5/M6 raises their transconductance:\n$$g_{m_{5,6}} \\propto W_{5,6}$$\nwhich strengthens the regenerative positive feedback and increases the regeneration rate.\n\n**Detrimental effect — increased parasitic capacitance:**\nWider M5/M6 adds capacitance to *both* output nodes X and Y:\n\n| Capacitance | Location | Source |\n|---|---|---|\n| $C_{db5}$ | Node X | M5 drain |\n| $C_{gs6}$ | Node X | M6 gate (cross-connected to X) |\n| $C_{db6}$ | Node Y | M6 drain |\n| $C_{gs5}$ | Node Y | M5 gate (cross-connected to Y) |\n\n### Why Capacitance Increase Dominates\n\nThe regeneration time constant is:\n$$\\tau = \\frac{C_X}{g_{m3} + g_{m5}}$$\n\nSpeed improves only if the intrinsic speed of M5 alone is *faster* than the existing latch:\n$$\\frac{C_{5,\\text{added}}}{g_{m5}} < \\tau_{\\text{latch}}$$\n\nThe intrinsic PMOS time constant is:\n$$\\tau_{PMOS} \\approx \\frac{\\frac{2}{3}L^2}{\\mu_p V_{ov}}$$\n\nSince $\\mu_n \\approx 2$–$3\\times\\mu_p$, the PMOS gm/C ratio is **inherently inferior** to NMOS. Scaling up M5/M6 adds proportionally more capacitance per unit of regenerative gm than the NMOS transistors already provide.\n\n### Conclusion\n\n> **Speed degrades.**\n\nIncreasing M5 and M6 widths makes the latch slower because:\n1. PMOS has lower carrier mobility → worse gm/C ratio than M3/M4 (NMOS)\n2. Larger M5/M6 add significant capacitive loading at X and Y without a commensurate gm benefit\n3. During the initial evaluation phase, larger PMOS devices more strongly oppose the differential discharge of X and Y, delaying the latching decision",
        "format": "markdown",
        "sha256": "269f765ed21bd6a99cab7b38b30231b5bb12cbf9b3f47e587a7dd5c247e71e5b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the cross-coupled PMOS devices and the competing effects of stronger regeneration and added capacitance. However, it wrongly claims capacitance dominates initially and concludes speed degrades; the expected trend is an initial speed improvement, with capacitance limiting the benefit at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1604,
        "output_tokens": 14065,
        "total_tokens": 15669,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13415,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1604,
        "output_tokens": 14065,
        "total_tokens": 15669,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13415,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Clocked Transistor Width on Circuit Speed\n\n### Circuit Operation Overview\n\nThis is a **dynamic master-slave flip-flop** with:\n- **Left stage (master):** evaluates during CK = 1 (CK̄-PMOS ON, CK-NMOS ON → node X)\n- **Right stage (slave):** evaluates during CK = 0 (CK-PMOS ON, CK̄-NMOS ON → node Y → Z)\n\nThe clocked transistors act as **series switches** in both the pull-up and pull-down paths at nodes X and Y.\n\n---\n\n### Speed Analysis Using Elmore Delay\n\nFor the NMOS pull-down stack (CK-NMOS in series with M₁), the Elmore delay for discharging node X is:\n\n$$\\tau_{\\text{fall}} = \\underbrace{(R_{CK} + R_{M_1}) \\cdot C_X}_{\\text{output node}} + \\underbrace{R_{M_1} \\cdot C_{\\text{int}}}_{\\text{internal node}}$$\n\nwhere $C_{\\text{int}}$ is the capacitance at the **internal node** between CK-NMOS (source) and M₁ (drain).\n\nWhen the clocked transistor width is scaled by factor $k$:\n\n| Parameter | Effect |\n|-----------|--------|\n| $R_{CK} \\rightarrow R_{CK}/k$ | ✅ Lower resistance |\n| $C_X \\rightarrow C_X + k \\cdot C_{d,CK}$ | ❌ More drain capacitance at X |\n| $C_{\\text{int}} \\rightarrow C_{\\text{int}} + k \\cdot C_{s,CK}$ | ❌ More source capacitance at internal node |\n\n---\n\n### Why Speed **Degrades**\n\n**Key insight:** The drive current through the pull-down stack is **limited by M₁** (the data transistor, which is not being scaled), not the clocked transistor. Making the clocked transistors wider therefore:\n\n1. **Negligible current improvement** – M₁ is the dominant resistance; removing the clocked transistor's $R_{CK}$ has diminishing returns.\n\n2. **Internal node bottleneck** – The internal node must discharge through M₁ with time constant:\n$$\\tau_{\\text{int}} = R_{M_1} \\cdot C_{\\text{int}} \\propto k$$\nThis increases linearly with the clocked transistor width.\n\n3. **Increased capacitive loading at X/Y** – Both drain (CK-NMOS at X) and source (at the internal node) junction capacitances scale with width, requiring more charge redistribution before X/Y can transition.\n\nSince the drive strength is bottlenecked by **M₁** (unchanged), the extra capacitance from wider clocked transistors dominates:\n\n$$\\boxed{\\text{Speed DEGRADES}}$$\n\nThe added parasitic capacitance at internal nodes and output nodes (X, Y) increases RC time constants without a proportional improvement in switching current, resulting in slower transitions and reduced maximum operating frequency.",
        "format": "markdown",
        "sha256": "bcb67c5d092e0fd8c6112333819671d943d0ec6a2251e980957b318e52e78bf5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer recognizes the series clocked devices and added capacitance, but concludes speed degrades. The golden solution says widening initially improves speed by reducing clocked-device on-resistance; it explicitly assigns a score of 2 to the degradation conclusion.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 47126,
        "total_tokens": 48704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 46358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 47126,
        "total_tokens": 48704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 46358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Clocked Transistor Width on Speed\n\n### Circuit Identification\n\nThis circuit is a sense-amplifier based flip-flop (SAFF) with two half-stages:\n- **Left stage (node X):** CK̄ PMOS (pull-up) and CK NMOS (pull-down) are the clocked transistors, in series with cross-coupled PMOS (above) and M₁ (below)\n- **Right stage (node Y):** CK PMOS (pull-up) and CK̄ NMOS (pull-down) are the clocked transistors, similarly placed\n\n### Critical Node Capacitances\n\nThe clocked transistors' **drain terminals connect directly to nodes X and Y**:\n\n$$C_X = C_{d,\\overline{CK}\\text{-PMOS}} + C_{d,CK\\text{-NMOS}} + C_\\text{fixed}$$\n\n$$C_Y = C_{d,CK\\text{-PMOS}} + C_{d,\\overline{CK}\\text{-NMOS}} + C_\\text{fixed}$$\n\nSince drain capacitance scales linearly with transistor width: **increasing W of any clocked transistor directly increases $C_X$ or $C_Y$.**\n\n### Why Speed **Degrades**\n\n| Effect | Impact |\n|--------|--------|\n| Drain cap ↑ at X, Y | Load on critical nodes ↑ → **slower** |\n| Drive current ↑ | Limited by series transistors M₁ (fixed width) → marginal improvement |\n| Internal node cap ↑ | Charge sharing elevates $V_{int}$, reducing $V_{GS}$ of clocked NMOS → **slower** |\n| Gate cap load on CK ↑ | Slower clock transitions → **slower** |\n\n### Dominant Mechanism\n\nThe resolution time of the sense amplifier is:\n\n$$\\tau_\\text{eval} \\approx \\frac{C_X}{g_{m,\\text{cross-coupled}}}$$\n\nIncreasing the clocked transistor width increases $C_X$ **proportionally**, while $g_{m,\\text{cross-coupled}}$ (set by the fixed cross-coupled PMOS) remains unchanged. The drive current does not improve proportionally because M₁ (the data transistor) is the bottleneck in the evaluation path.\n\n### Conclusion\n\n> **Speed degrades.** The increased drain capacitance at nodes X and Y (scaling linearly with transistor width) outweighs any marginal improvement in drive current, since the series transistors (M₁ and cross-coupled PMOS) are unchanged and limiting. The evaluation time constant $\\tau \\propto C_\\text{node}/g_m$ increases.",
        "format": "markdown",
        "sha256": "357db4d46d2adc68bd483ef87895679807722a02f97b1dad1078e6b9107a6b18"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that widening adds capacitance at X and Y, but incorrectly concludes that speed degrades: the lower on-resistance initially improves speed, with added capacitance limiting or reversing the benefit only at larger widths.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 21281,
        "total_tokens": 22859,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20614,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 21281,
        "total_tokens": 22859,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20614,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Clocked Transistor Width Scaling\n\n### Identifying the Clocked Transistors\n\nThe clocked transistors in this circuit are:\n- **Left stage:** CK̄ PMOS (pull-up stack) and CK NMOS (pull-down stack)\n- **Right stage:** CK PMOS (pull-up stack) and CK̄ NMOS (pull-down stack)\n\nEach sits in series with a fixed-width transistor: the feedback/top PMOS or the data transistor M₁.\n\n---\n\n### Two Competing Effects\n\n**When clocked transistors are made wider (W → kW):**\n\n| Effect | Impact on Speed |\n|--------|----------------|\n| ↑ Drive current when ON | ✅ Beneficial |\n| ↑ Drain capacitance **at output nodes X, Y** | ❌ Detrimental |\n| ↑ Source capacitance **at internal nodes** (between clocked and data transistors) | ❌ Detrimental |\n\n---\n\n### Why Degradation Dominates\n\n**At output nodes X and Y:**\n\nBoth the clocked PMOS *and* clocked NMOS have their **drains at X (or Y)**. During each transition, only one is active—the other is OFF and contributes only **capacitance without current**:\n\n$$\\tau_X \\approx \\frac{C_X}{I_\\text{active}}, \\quad C_X = C_{d,\\text{CK-NMOS}} + C_{d,\\overline{\\text{CK}}\\text{-PMOS}} + C_\\text{other}$$\n\nSince $C_X \\propto k$ while $I_\\text{active}$ is capped by the **fixed** M₁ or top PMOS transistors, $\\tau_X$ increases.\n\n**At internal nodes** (e.g., between CK NMOS source and M₁ drain):\n\n$$\\tau_\\text{int} \\approx \\frac{C_\\text{source,CK} + C_\\text{drain,M_1}}{I_{M_1}} \\propto k$$\n\nThe fixed M₁ must equilibrate a *larger* capacitance—adding delay before X can swing.\n\n---\n\n### Conclusion\n\n> **Speed degrades** when the widths of the clocked transistors are increased.\n\nThe increased drain capacitances directly load nodes X and Y, while the increased source capacitances create larger internal-node charge-sharing delays. Neither effect is compensated by the larger current, since the **data transistors M₁ and top-PMOS (fixed widths) become the bottleneck** limiting the drive current. The net result is higher propagation delay (slower circuit).",
        "format": "markdown",
        "sha256": "de8cf41dc55747de77e541a90ffbd2d05d9ab1e0e8962621ee0dcc4531c2064f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the added capacitance and fixed data-device bottleneck, but concludes speed degrades. The key result is that widening initially improves speed by lowering clocked-device on-resistance, before added capacitance limits or reverses the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 20359,
        "total_tokens": 21937,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 20359,
        "total_tokens": 21937,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Quadrature Output Analysis of the Divide-by-2 Circuit\n\n### Circuit Operation\n\nThis is a **static CMOS divide-by-2 (÷2)** circuit consisting of two master-slave latches in a feedback loop:\n\n| Phase | CK | Left Latch (→X) | Right Latch (→Y→Z) |\n|-------|-----|------------------|---------------------|\n| CK=1 | HIGH | **Transparent**: X ← inv(Z) | **Holds**: Y, Z unchanged |\n| CK=0 | LOW | **Holds**: X unchanged | **Transparent**: Y ← inv(X) |\n\nThe feedback path forces **D = Q̄** (toggle behavior), creating divide-by-2 operation.\n\n### Waveform Analysis\n\nTracing through one complete output cycle (period = 2T, where T = clock period):\n\n| Time Interval | CK | X | Y | Z = inv(Y) |\n|---|---|---|---|---|\n| 0 → T/2 | HIGH | **0** | 0 | **1** |\n| T/2 → T | LOW | **0** | 1 | **0** |\n| T → 3T/2 | HIGH | **1** | 1 | **0** |\n| 3T/2 → 2T | LOW | **1** | 0 | **1** |\n\n### Phase Relationship\n\n$$\\Delta t_{X\\to Z} = \\frac{T}{2} \\quad \\Longrightarrow \\quad \\Delta\\phi = \\frac{T/2}{2T} \\times 360° = \\boxed{90°}$$\n\n- **X rises** at $t = T$  \n- **Z rises** at $t = 3T/2$ → Z **lags** X by exactly 90°\n\n### Conclusion\n\n**Yes**, this structure provides quadrature outputs. The nodes **X** and **Z** are in quadrature (90° phase separation) at frequency $f_\\text{CK}/2$. This is the fundamental reason divide-by-2 circuits are used in RF systems for I/Q (in-phase/quadrature) local-oscillator generation — the master latch output (X) and the inverted slave output (Z) inherently differ by one-quarter of the output period.",
        "format": "markdown",
        "sha256": "b54d2ae059db2d3a5db9b58d2a0fcbfce1a341287bea7c2a2ff4e4d7e388c7a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the ideal divide-by-two timing and nominal 90° X–Z relationship, but claims the quadrature is exact and omits both the Inv3 delay and unequal latch loading that make it imperfect. Its stated latch signal paths are also inaccurate.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 14795,
        "total_tokens": 16357,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14232,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 14795,
        "total_tokens": 16357,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14232,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of the Divide-by-2 Circuit\n\n### Circuit Operation\n\nThe structure is a **master-slave divide-by-2 frequency divider** consisting of:\n- **Left stage (master latch):** transparent when CK = 1, holds when CK = 0\n- **Right stage (slave latch):** transparent when CK = 0, holds when CK = 1  \n- **Feedback path:** Inv₃ inverts node Y to produce Z, which feeds back to the master input\n\nThe connection D = Z = $\\overline{Y}$ causes the circuit to toggle, dividing the clock frequency by 2.\n\n### Output Waveforms\n\nTracing the logic states (clock period = $T_{CK}$):\n\n| Time | CK | X | Y | Z |\n|------|----|---|---|---|\n| $0$ | 1 | 1 | 0 | 1 |\n| $T_{CK}/2$ | 0 | 1 | 1 | 0 |\n| $T_{CK}$ | 1 | 0 | 1 | 0 |\n| $3T_{CK}/2$ | 0 | 0 | 0 | 1 |\n| $2T_{CK}$ | 1 | 1 | 0 | 1 |\n\nBoth X and Y have period $T_{out} = 2T_{CK}$.\n\n### Phase Relationship\n\n$$\\boxed{\\Delta\\phi = \\frac{T_{CK}/2}{T_{out}} \\times 360° = \\frac{T_{CK}/2}{2T_{CK}} \\times 360° = 90°}$$\n\n**Y lags X by exactly 90°**, since:\n- X captures Z on each **falling** edge of CK\n- Y captures X on each **rising** edge of CK\n- The timing offset $T_{CK}/2$ equals exactly **one-quarter** of the output period\n\n### Conclusion\n\n**Yes**, the structure provides quadrature outputs. Nodes **X** (master output) and **Y** (slave output) are inherently in quadrature — both at frequency $f_{CK}/2$ with a 90° phase difference — making this topology widely used for I/Q signal generation in RF circuits.",
        "format": "markdown",
        "sha256": "767ef984cc6884636ff670db8bb3745187b4da0341c06d706f0a494ed50d5708"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature relationship, but treats it as exact and omits both the inverter-delay skew and unequal latch loading that make the outputs nonideal.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 13030,
        "total_tokens": 14592,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12473,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 13030,
        "total_tokens": 14592,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12473,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of the Divide-by-2 Quadrature Circuit\n\n### Circuit Operation\n\nThis is a **master-slave D flip-flop configured as a divide-by-2 frequency divider**, with two identical latch stages driven by complementary clocks:\n\n| CK State | Left Stage (→X) | Right Stage (→Y) |\n|----------|----------------|-----------------|\n| CK = 1 | **Transparent** (samples Z) | **Holding** |\n| CK = 0 | **Holding** | **Transparent** (samples X) |\n\nThe cross-coupling creates the feedback condition:\n$$X_{\\text{new}} = \\overline{Y}_{\\text{old}} = Z, \\qquad Y_{\\text{new}} = X_{\\text{new}}$$\n\n### Timing Analysis\n\nStarting from Y = 0:\n\n| Event | Time | X | Y | Z = $\\overline{Y}$ |\n|-------|------|---|---|---|\n| Initial | 0 | — | 0 | 1 |\n| Rising edge | T/2 | **1** | 0 | 1 |\n| Falling edge | T | 1 | **1** | 0 |\n| Rising edge | 3T/2 | **0** | 1 | 0 |\n| Falling edge | 2T | 0 | **0** | 1 |\n\nBoth X and Y oscillate at **period 2T** (frequency = $f_{CK}/2$), but X transitions at every rising edge and Y at every falling edge.\n\n### Phase Relationship\n\n$$\\Delta t = T - \\frac{T}{2} = \\frac{T}{2}$$\n\nExpressed as a fraction of the output period $2T$:\n\n$$\\phi = \\frac{T/2}{2T} = \\frac{1}{4} \\text{ period} = \\boxed{90°}$$\n\n### Conclusion\n\n**Yes**, this structure provides quadrature outputs. The outputs **X** and **Y** are at half the input clock frequency with an exact **90° phase difference**, making them true quadrature (I/Q) signals. This is an inherent property of any divide-by-2 master-slave flip-flop topology.",
        "format": "markdown",
        "sha256": "ce59ccac0b904ffb2ed3ce541a118bf48d9de543fd8b31d71b840508383b23db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies nominal divide-by-two quadrature from the latches switching on opposite clock phases, but incorrectly calls the 90° relationship exact and omits the inverter delay and unequal latch loading that cause departures from quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 4797,
        "total_tokens": 6359,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4253,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1562,
        "output_tokens": 4797,
        "total_tokens": 6359,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4253,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Clocked Transistor Width Increase\n\n### Circuit Identification\n\nThe circuit is a **regenerative sense amplifier latch** consisting of:\n- A **cross-coupled core** (2 PMOS + 2 NMOS) that provides gain/regeneration\n- **4 clocked transistors** acting as switches: 2 PMOS (CK̄, CK) at top and 2 NMOS (CK, CK̄) at bottom\n\n### Role of Clocked Transistors\n\nThe clocked transistors are **series switches**, not regenerative elements. They serve to:\n- Connect the latch core to V_DD (clocked PMOS during precharge)\n- Connect the latch core to GND (clocked NMOS during evaluation)\n\n### Speed Impact of Increasing Width\n\nThe regeneration time constant of the latch is:\n\n$$\\tau_{regen} \\propto \\frac{C_{total}}{g_m^{(cross-coupled)}}$$\n\n| Effect of Wider Clocked Transistors | Impact |\n|---|---|\n| ↑ Drain capacitance ($C_{db}$) added to internal nodes | **↑ $C_{total}$ → Slower** |\n| ↑ Gate-drain capacitance ($C_{gd}$) | **↑ $C_{total}$ → Slower** |\n| ↓ Switch on-resistance | Negligible (already small) |\n| Effect on $g_m$ of cross-coupled pair | **None** (unchanged) |\n\n### Conclusion: **Speed Degrades**\n\nIncreasing the clocked transistor width primarily **increases the parasitic capacitance at the critical internal nodes** without increasing the regenerative transconductance $g_m$. This raises $\\tau_{regen}$, slowing the latch.\n\n> The clocked transistors only need to be large enough to avoid current-limiting the core; beyond that threshold, further widening only adds unwanted capacitive loading to the sensitive internal regeneration nodes.",
        "format": "markdown",
        "sha256": "884337822de19e3b89868d00d05f0b9841b4598fa48e5d82566969604dc3311d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the central result: wider clocked transistors improve speed by lowering series resistance, with their added capacitance largely off the data path. It misidentifies that capacitance as the dominant loading and overlooks charge sharing as an acceptable swing limitation.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1586,
        "output_tokens": 6474,
        "total_tokens": 8060,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5991,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1586,
        "output_tokens": 6474,
        "total_tokens": 8060,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5991,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis of Clocked Transistor Width on Speed\n\n### Circuit Identification\n\nThe circuit is a **regenerative sense-amplifier latch** consisting of:\n- **Clocked transistors**: PMOS (gates: $\\overline{CK}$, $CK$) at top; NMOS (gates: $CK$, $\\overline{CK}$) at bottom\n- **Cross-coupled regenerative pair** (non-clocked) in the middle of each column\n- An output inverter\n\n---\n\n### Speed **Degrades**\n\nIncreasing the widths of the clocked transistors makes the circuit **slower**. Here is why:\n\n#### 1. Increased Capacitive Load at Regeneration Nodes\n\nThe drain-diffusion capacitance of every clocked transistor sits directly on the internal regeneration nodes. The regeneration time constant is:\n\n$$\\boxed{\\tau_{\\text{reg}} = \\frac{C_{\\text{node}}}{g_{m,\\text{cross-coupled}}}}$$\n\n| Effect | Result |\n|--------|--------|\n| Wider clocked transistors → $C_{\\text{drain}} \\propto W$ | $C_{\\text{node}}$ **increases** |\n| Cross-coupled pair width unchanged | $g_{m,\\text{cross-coupled}}$ **unchanged** |\n| Net: $\\tau_{\\text{reg}}$ increases | **Delay increases** |\n\n#### 2. PMOS Clocked Transistors Are Off During Evaluation\n\nDuring the evaluation phase, the PMOS clocked transistors are **off** — they provide **no current benefit**, only adding parasitic drain capacitance. This is a pure penalty with no corresponding gain.\n\n#### 3. Heavier Clock Loading\n\nWider clocked transistors have proportionally larger gate capacitances ($C_G \\propto W$), loading the clock driver and causing **slower clock edges** — worsening setup/hold margins across the system.\n\n---\n\n### Summary\n\n$$\\text{Wider clocked transistors} \\Rightarrow C_{\\text{node}} \\uparrow,\\; g_m \\text{ unchanged} \\Rightarrow \\tau_{\\text{reg}} \\uparrow \\Rightarrow \\text{Speed degrades}$$\n\n> **The speed degrades.** The dominant effect is the increased drain capacitance at the sensitive internal nodes, which raises the regeneration time constant, even though the wider transistors marginally improve their drive strength when turned on.",
        "format": "markdown",
        "sha256": "0af1c42539befbd5c7f81251cb0cae22b7c8fb1a15c355dbc3b011d733100c19"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that widening the clocked transistors degrades speed, contrary to the correct result: lower series resistance improves speed, while charge sharing is an acceptable limitation.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1586,
        "output_tokens": 11740,
        "total_tokens": 13326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11154,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1586,
        "output_tokens": 11740,
        "total_tokens": 13326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11154,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Analysis: Effect of Wider Clocked Transistors\n\n### Identifying the Clocked Transistors\n\nThe clocked transistors are the **four switch-like devices** controlled directly by CK or $\\overline{\\text{CK}}$:\n- **Top-left PMOS** (gate = $\\overline{\\text{CK}}$) and **Bottom-left NMOS** (gate = CK): gate the left latch cell to VDD/GND\n- **Top-right PMOS** (gate = CK) and **Bottom-right NMOS** (gate = $\\overline{\\text{CK}}$): gate the right latch cell to VDD/GND\n\nThese transistors act as **power switches** that enable the cross-coupled inverter pair during the appropriate clock phase.\n\n### Speed Analysis\n\nThe regeneration time constant for the cross-coupled latch is:\n\n$$\\tau = \\frac{C_{\\text{node}}}{g_{m,\\text{cross-coupled}}}$$\n\nIncreasing the width $W$ of the clocked transistors has **two competing effects**:\n\n| Effect | Impact on Speed |\n|--------|----------------|\n| ↓ On-resistance ($R_{on} \\propto 1/W$) | Minor improvement (switches already provide adequate current) |\n| ↑ Drain capacitance ($C_d \\propto W$) | **Significant degradation** — added to internal node capacitance |\n\n### Why Speed Degrades\n\nWider clocked transistors increase the **parasitic drain capacitance** directly loading the internal nodes:\n\n$$C_{\\text{node}} = \\underbrace{C_{d,\\text{cross-coupled}}}_{\\text{unchanged}} + \\underbrace{C_{d,\\text{clocked}} \\uparrow}_{\\text{increases with } W}$$\n\nSince $g_{m,\\text{cross-coupled}}$ remains unchanged (we only widened the switches, not the regenerative transistors), $\\tau$ increases and **speed degrades**.\n\n### Conclusion\n\n> **Speed degrades.** The increased drain capacitance of wider clocked transistors loads the internal nodes, slowing latch regeneration. The benefit of lower on-resistance is secondary since the switches are not the current bottleneck in a properly designed circuit.",
        "format": "markdown",
        "sha256": "ed1bcab55a860c781c111df10b75336208e900dd7b5d60777756b49f7d2af33c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that speed degrades, contrary to the correct result that widening the clocked devices improves speed by reducing series resistance with little data-path loading. It mischaracterizes their internal-node capacitance as the dominant effect.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1586,
        "output_tokens": 11078,
        "total_tokens": 12664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1586,
        "output_tokens": 11078,
        "total_tokens": 12664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Ring Oscillator Circuit Analysis\n\n## Circuit Identification\n\nThe figure shows a **3-stage controlled ring oscillator** consisting of:\n- 3 inverters (Inv₁ + 2 buffer-inverters) with output bubbles\n- 2 transmission-gate switches controlled by **CK** and **CK̄**\n- A feedback path closing the ring\n\n## Topological Analysis\n\n```\n    CK switch    Inv₁       CK̄ switch    Inv₂     Inv₃\n ┌──[ ]──▷○──────────────[ ]──▷○──────▷○──┐\n └──────────────────────────────────────────┘\n              (feedback path)\n```\n\n| Node | Signal | Relationship |\n|------|--------|--------------|\n| Input of Inv₁ | **CK** | Base clock signal |\n| Output of Inv₁ | **CK̄** | Complement (Inv₁ generates it) |\n\n## Oscillation Conditions\n\n**For the ring to oscillate, both switches must close simultaneously:**\n\n| Switch | Type | Closes when |\n|--------|------|-------------|\n| CK switch (PMOS) | Active-low | CK = 0 |\n| CK̄ switch (NMOS) | Active-high | CK̄ = 1 → CK = 0 |\n\n> ✅ Both switches close when **CK = 0** → oscillator **enabled**\n> ❌ Both switches open when **CK = 1** → oscillator **disabled**\n\n## Stability Analysis\n\nWith 3 inverters forming a closed loop, **no stable DC state exists**:\n\n$$\\text{If } V_{n_1} = 0 \\Rightarrow V_{n_3} = 1 \\neq V_{n_1} \\quad \\text{(contradiction → oscillates)}$$\n\n## Frequency Calculation\n\n$$\\boxed{f_{\\text{osc}} = \\frac{1}{2 \\cdot N_{\\text{inv}} \\cdot t_{pd}} = \\frac{1}{6\\, t_{pd}}}$$\n\nwhere $t_{pd}$ is the propagation delay per inverter stage.\n\n## Key Takeaways\n\n1. **Self-generating**: The oscillator produces its own complementary clock pair **(CK, CK̄)**\n2. **Odd inversions (3)**: Guarantees no stable state → sustained oscillation\n3. **Controllable**: External CK disables the ring (both switches open in unison)\n4. **Application**: On-chip clock generation, PLL/DLL building block, timing reference",
        "format": "markdown",
        "sha256": "53e14cca003c2585ed95e27b271beca33a338a73f27789b15a883d454b3150e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a controlled ring oscillator; the figure is a divide-by-two circuit built from dynamic latches.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 8336,
        "total_tokens": 9762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7688,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 8336,
        "total_tokens": 9762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7688,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Ring Oscillator Circuit\n\n## Circuit Identification\n\nThis is a **3-stage ring oscillator** designed to generate complementary clock signals **CK** and **C̄K**.\n\n## Circuit Topology\n\nThe closed feedback loop contains, in sequence:\n\n| Element | Function |\n|---------|----------|\n| Switch (CK) | Output tap / pass element |\n| Inv₁ | 1st inverting stage |\n| Switch (C̄K) | Output tap / pass element |\n| Inv₂ | 2nd inverting stage |\n| Inv₃ | 3rd inverting stage |\n| ↩ Feedback | Closes the ring |\n\n## Oscillation Mechanism\n\nThe circuit oscillates because it satisfies the **Barkhausen Criterion**:\n\n$$\\text{Total phase shift} = 3 \\times 180° = 540° \\equiv 180° + 360° \\checkmark$$\n\n$$\\text{Loop gain} > 1 \\checkmark$$\n\nAn **odd number of inversions** ensures the signal can never settle into a stable DC state → sustained oscillation results.\n\n## Timing Analysis\n\n$$\\boxed{T_{osc} = 2 \\cdot N \\cdot t_{pd} = 6\\,t_{pd}}$$\n\n$$f_{osc} = \\frac{1}{6\\,t_{pd}}$$\n\nwhere $N = 3$ stages and $t_{pd}$ = propagation delay per inverter.\n\n## Clock Output Relationship\n\n```\nCK  : ‾|_|‾|_|‾|_|\nC̄K : _|‾|_|‾|_|‾|\n      ←t_pd→\n```\n\n- **CK** is tapped before Inv₁\n- **C̄K** is tapped after Inv₁ — exactly one gate delay later\n- The two outputs are **complementary** (180° out of phase) with ≈50% duty cycle\n\n## Key Properties\n\n- Simple, compact clock source requiring no external frequency reference\n- Provides **both clock phases** simultaneously from a single ring\n- Frequency is process/temperature/voltage dependent (can be used as a VCO in a PLL)\n- Minimum skew between CK and C̄K (only one $t_{pd}$ apart)",
        "format": "markdown",
        "sha256": "208a6a3a875e29110172db741a22893a16bfbb1fa55a4b94515330220e836d3c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a ring oscillator and describes an unrelated oscillation mechanism. It misses the dynamic-latch divide-by-two function.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 9466,
        "total_tokens": 10892,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8908,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 9466,
        "total_tokens": 10892,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8908,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Analysis of the Clocked Inverter Ring Circuit\n\n## Circuit Structure\n\nThe arrangement consists of a **feedback ring** containing:\n\n| Element | Type | Control |\n|---------|------|---------|\n| SW₁ | Pass switch | CK |\n| Inv₁ | Inverter | — |\n| SW₂ | Pass switch | CK̄ |\n| Inv₂, Inv₃ | Two inverters | — |\n\nThe output of Inv₃ feeds back to the input of SW₁, completing the ring.\n\n---\n\n## Phase-by-Phase Operation\n\n### When CK = 1 (SW₁ closed, SW₂ open)\n$$C = \\overline{A} \\quad \\text{(node A propagates through Inv}_1\\text{, stored at node C)}$$\n\n### When CK = 0 (SW₁ open, SW₂ closed)\n$$A_{\\text{new}} = \\overline{\\overline{C}} = C = \\overline{A_{\\text{old}}}$$\n> The two inverters (Inv₂, Inv₃) produce a net double inversion, so the feedback value **toggles**.\n\n---\n\n## Signal Flow Diagram\n\n```\nCK=1: A ──[SW₁]──► Inv₁ ──► C (held)\nCK=0:              C ──[SW₂]──► Inv₂ ──► Inv₃ ──► Aₙₑw = NOT(A)\n```\n\n---\n\n## Key Result\n\nSince $A_{n+1} = \\overline{A_n}$ after each full clock period:\n\n$$\\boxed{f_{\\text{out}} = \\frac{f_{CK}}{2}}$$\n\nThe circuit is a **dynamic divide-by-2 frequency divider** (T flip-flop with T = 1 always).\n\n- The 3 inverters (odd count) provide the necessary inversion for toggling.\n- The complementary switches (CK / CK̄) prevent simultaneous activation of both halves, ensuring **race-free, glitch-free** operation.\n- This topology is widely used in **high-speed PLL prescalers** and clock division networks.",
        "format": "markdown",
        "sha256": "de0992892acd47c0457abc40c9ba07129dd2ffdf713977f7227fed00ac2742c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic divide-by-two and explains alternating clock phases, storage, and toggling to produce an output at half the clock frequency. The golden solution allows internal inverter-path details to be secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 6772,
        "total_tokens": 8198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6226,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 6772,
        "total_tokens": 8198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6226,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Effect of the Red Feedback Inverter on Performance\n\n### Circuit Function\nThe red inverter (Inv₁ feedback) is connected from the **output** of Inv₁ back to its **input**, forming a cross-coupled keeper latch to hold state when the CK pass gate opens.\n\n---\n\n### Performance Impact\n\n| Phase | CK State | Effect of Red Inverter |\n|-------|----------|----------------------|\n| **Transparent** | CK = 1 (switch closed) | ⚠️ **Fights incoming data** → contention current |\n| **Hold** | CK = 0 (switch open) | ✅ **Maintains stored state** → prevents floating node |\n\n---\n\n### Specific Degradation\n\n**1. Increased Setup Time ($t_{setup}$)**\nWhen new data arrives through the pass gate, the driving signal must **overpower** the feedback inverter's opposing drive:\n\n$$t_{setup} \\uparrow \\quad \\because \\quad I_{drive} \\text{ must overcome } I_{feedback}$$\n\n**2. Contention Current**\nDuring write phase, both the pass gate input and the feedback inverter drive the node simultaneously (in opposite directions), wasting power and slowing the transition.\n\n**3. Added Capacitive Load**\nThe red inverter's gate capacitance loads the output of Inv₁, increasing propagation delay.\n\n---\n\n### Design Tradeoff\n\n$$\\underbrace{\\text{Weak feedback inverter}}_{\\text{less contention, faster write}}\\ \\longleftrightarrow\\ \\underbrace{\\text{Strong feedback inverter}}_{\\text{better state retention, noise immunity}}$$\n\n> **Conclusion:** The red inverter **degrades speed** (longer $t_{setup}$, reduced max frequency) but is **necessary** to prevent the internal node from floating during the hold phase. It is typically sized **weak** to minimize performance loss while ensuring reliable state retention.",
        "format": "markdown",
        "sha256": "b1c320b96b8d274c6b4657decd6a3be9728dc6db00075aa10de3fd4e72522db0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as a feedback keeper rather than an unclocked feedforward path. Consequently, it misses the high-speed benefit and the low-frequency failure mode, and reaches the opposite performance conclusion.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1227,
        "output_tokens": 2513,
        "total_tokens": 3740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1227,
        "output_tokens": 2513,
        "total_tokens": 3740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Effect of the Red Feedback Inverter on Performance\n\n### Circuit Context\nThis is a **static latch** stage where the red inverter creates a feedback loop around Inv₁ and the CK transmission-gate switch. Without it, the stage would be a *dynamic* latch.\n\n---\n\n### Performance Impacts\n\n| Aspect | Effect | Explanation |\n|--------|--------|-------------|\n| **Write Speed** | ❌ Degraded | When CK closes, the feedback inverter **opposes** the incoming signal (write contention), requiring more drive current |\n| **Setup Time** | ❌ Increased | Input must overcome the feedback before the latch settles — longer setup requirement |\n| **Node Capacitance** | ❌ Increased | The red inverter adds gate capacitance to both the input and output nodes of Inv₁ |\n| **State Retention** | ✅ Improved | Holds stored value **indefinitely** when the CK switch is open (static vs. dynamic storage) |\n| **Noise Immunity** | ✅ Improved | Regenerative feedback reinforces the stored logic level against noise/leakage |\n\n---\n\n### Key Trade-off\n\n$$\\underbrace{\\text{Dynamic Latch}}_{\\text{fast, but leaks charge}} \\xrightarrow{+\\text{ red inverter}} \\underbrace{\\text{Static Latch}}_{\\text{slower, but holds state}}$$\n\nThe red inverter must be **weaker** (minimum-size transistors) than Inv₁ so the input can overpower it during writes, minimizing the contention penalty while still providing adequate hold strength.\n\n**Bottom line:** The red inverter degrades raw speed (adds ~10–20% delay and contention power) but is necessary to prevent data loss from charge leakage during the hold phase.",
        "format": "markdown",
        "sha256": "6c194d102c4a11792a0054dafca1029c598ce81d5e2de5aaff4c2a9f7206a508"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a static-latch feedback keeper. It misses the feedforward bypass that improves high-speed operation and incorrectly claims the inverter prevents low-frequency data loss, whereas its unclocked path raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1227,
        "output_tokens": 3076,
        "total_tokens": 4303,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1227,
        "output_tokens": 3076,
        "total_tokens": 4303,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Role and Performance Impact of the Red (Feedback) Inverter\n\n### What It Does\nThe red inverter (Inv₁ feedback) connects the **output of Inv₁ back to its own input**, creating a cross-coupled pair. This converts the master latch from **dynamic** to **static** storage.\n\n---\n\n### Performance Trade-offs\n\n| Phase | Effect |\n|-------|--------|\n| **CK = 1** (Write/Transparent) | Feedback **fights** incoming data → write contention |\n| **CK = 0** (Hold) | Cross-coupled pair **statically retains** state |\n\n#### ✅ Benefits\n- **No minimum clock frequency** – state is held statically without relying on charge stored on a floating node\n- **Immunity to leakage** – critical in deep-submicron nodes where sub-threshold leakage can corrupt dynamic storage\n- **Improved noise margin** at the stored node\n\n#### ❌ Costs\n- **Increased setup time (t_su)** – the feedback must be *overpowered* before the latch can capture new data\n- **Write contention current** – both Inv₁ and the red inverter conduct simultaneously during write, wasting power\n- **Added capacitive load** on the internal node (input/output of Inv₁)\n\n---\n\n### Design Mitigation\nTo minimize the performance penalty, the red inverter is sized **weaker** than Inv₁ (typically a drive-strength ratio of **1:3 to 1:5**):\n\n$$\\frac{W_{feedback}}{W_{Inv_1}} \\approx \\frac{1}{3} \\text{ to } \\frac{1}{5}$$\n\nThis ensures it is easily overdriven during write while still maintaining state during hold — the classic **robustness vs. speed** trade-off in static latch design.",
        "format": "markdown",
        "sha256": "2e486714deb4384aa9ddceceb30bce848f23de0dedfe9596d353c6f1af22b24b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a feedback keeper forming a static latch. It is a feedforward path that bypasses part of the first latch: it improves high-speed operation but raises the minimum usable clock frequency because it can overwhelm the main path at low frequencies. The answer claims the opposite low-frequency effect.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1227,
        "output_tokens": 3196,
        "total_tokens": 4423,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2751,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1227,
        "output_tokens": 3196,
        "total_tokens": 4423,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2751,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Evaluating the Answer\n\n**I largely agree with the answer**, and here is a detailed analysis of why.\n\n---\n\n## Circuit Analysis\n\nThe circuit is a two-phase clocked recirculating register (or ÷2 divider) with the following signal path:\n\n$$A \\xrightarrow{\\text{CK}} M \\xrightarrow{\\text{Inv}_1} C \\xrightarrow{\\overline{\\text{CK}}} D \\xrightarrow{\\text{Inv}_2} E \\xrightarrow{\\text{Inv}_3} A$$\n\nThe critical dynamic node is **M** (between the CK switch and Inv₁), which **floats** whenever CK = 0 and the switch is open.\n\n---\n\n## Role of the Red Inverter\n\nThe red inverter is connected **from Inv₁'s output (C) back to Inv₁'s input (M)**:\n\n| Element | Direction |\n|---------|-----------|\n| Inv₁ | $M \\rightarrow \\overline{M} = C$ |\n| Red inverter (keeper) | $C \\rightarrow \\overline{C} = M$ |\n\nTogether they form a **cross-coupled latch**:\n\n$$M \\underset{\\text{red inv}}{\\overset{\\text{Inv}_1}{\\rightleftharpoons}} C$$\n\nThis is exactly a **keeper** — a weak inverter providing positive feedback to hold the state of node M.\n\n---\n\n## Does It Remove the Minimum Clock Frequency Requirement?\n\n**Yes, for the first stage.** Without the keeper:\n\n- When CK = 0, node **M** is floating\n- Leakage current discharges **M** over time → data corruption\n- This mandates a **minimum clock frequency** $f_{\\min} \\propto 1/\\tau_{\\text{leak}}$\n\nWith the keeper (red inverter):\n\n- Node **M** is continuously (weakly) driven to its correct value\n- Charge is restored against leakage indefinitely\n- The first stage is now **effectively static** → **no minimum clock frequency**\n\n---\n\n## Important Caveat\n\nFor correct write operation, the keeper must be **sized weaker** than the CK pass gate. When CK = 1, the incoming signal must overpower the keeper feedback to write new data. This asymmetric sizing is the defining property of a *keeper* (vs. a full-strength static latch).\n\n> ⚠️ Note: The second stage (node **D**, floating when CK = 1) still faces leakage issues unless it also has a keeper — the red inverter only protects stage 1.\n\n---\n\n## Summary\n\nThe original answer is **correct**:\n\n> The red inverter is a **keeper** forming a **cross-coupled latch with Inv₁**, which maintains the floating node M against leakage and removes the minimum clock frequency requirement for the first stage.",
        "format": "markdown",
        "sha256": "1db9bd8552a1f37d9d63ca87e08a1b9591bd49ca8694e34f967670a919097831"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter's connections and treats it as a cross-coupled keeper. It is actually an unclocked feedforward branch that bypasses part of the latch path; it can help at high speed but can overpower the intended behavior at low clock rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1279,
        "output_tokens": 23859,
        "total_tokens": 25138,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23163,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1279,
        "output_tokens": 23859,
        "total_tokens": 25138,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23163,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Evaluating the Claim\n\n**I partially agree, but the description is imprecise and misses a key nuance.**\n\n---\n\n## Circuit Topology\n\nTracing the connections:\n\n| Node | Driver |\n|------|--------|\n| **A** (between CK switch and Inv1 input) | CK pass gate (when CK=1); red inverter output (when CK=0) |\n| **B** (Inv1 output) | Inv1; also feeds red inverter input |\n\nThe red inverter sits in a **feedback loop**: B → Red Inv → A → Inv1 → B. Two inverters in a loop = **positive feedback = bistable latch**. ✓\n\n---\n\n## Is the Answer Correct?\n\n### ✅ What is right:\nThe red inverter **does** form a cross-coupled latch with Inv1, and it **does** eliminate the minimum-clock-frequency problem caused by leakage.\n\nWithout it, node **A** floats when CK = 0:\n$$\\text{Dynamic node A} \\xrightarrow{\\text{leakage}} \\text{voltage drifts} \\Rightarrow \\text{requires } f_{CLK} \\geq f_{\\min}$$\n\nWith it, the cross-coupled pair **actively drives** node A:\n\n$$\\boxed{\\text{Inv1} + \\text{Red Inv} = \\text{static latch} \\Rightarrow \\text{no } f_{\\min} \\text{ constraint}}$$\n\n### ⚠️ What needs clarification — the critical sizing constraint:\n\nThe red inverter **must be intentionally weak** (a true *keeper*). When CK = 1, the input data writes through the pass gate and must **overdrive the keeper**:\n\n$$\\underbrace{W/L_{\\text{pass gate}}}_{\\text{strong}} \\gg \\underbrace{W/L_{\\text{red inv}}}_{\\text{weak keeper}}$$\n\nIf the red inverter were full-strength, write contention during the transparent phase (CK = 1) would cause functional failure or severe write-back current.\n\n---\n\n## Summary\n\n| Claim | Verdict |\n|-------|---------|\n| Keeper forming a cross-coupled latch with Inv1 | ✅ Correct |\n| Removes minimum clock frequency due to leakage | ✅ Correct |\n| Must be **weak** (sized as a keeper, not full latch) | ⚠️ Not mentioned — but essential for correctness |\n\nThe red inverter's **actual role**: a **weak feedback inverter (keeper)** that converts the dynamic master stage into a pseudo-static one, maintaining node A without requiring periodic refresh, while remaining overrideable by the input data during the transparent phase.",
        "format": "markdown",
        "sha256": "426473b8a47ac342114767f83d4cf9f647ef7377494ff8546ccd3669ad33145b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses the red inverter’s connections and incorrectly treats it as a cross-coupled keeper. It misses the actual feedforward path that bypasses part of the latch: it can speed high-rate operation but can overpower the intended behavior at low clock rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1279,
        "output_tokens": 18771,
        "total_tokens": 20050,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1279,
        "output_tokens": 18771,
        "total_tokens": 20050,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Assessment of the Given Answer\n\n**I agree — the explanation is correct.** The red inverter is indeed a keeper that forms a cross-coupled quasi-static latch with Inv1, and this does remove the minimum clock-frequency constraint imposed by leakage.\n\n---\n\n## Detailed Explanation of the Red Inverter's Role\n\n### Circuit Topology\n\n| Node | Driven by |\n|------|-----------|\n| A (Inv1 input) | CK switch (transparent) **and** red inverter output (hold) |\n| B (Inv1 output) | Inv1 and red inverter input |\n\nThe two inverters are cross-coupled:\n\n$$\\text{Inv1}: A \\xrightarrow{\\;\\overline{\\phantom{A}}\\;} B, \\qquad \\text{Red}: B \\xrightarrow{\\;\\overline{\\phantom{B}}\\;} A$$\n\nThis creates a **bistable cell** (quasi-static latch).\n\n### Why It Removes the Minimum Clock-Frequency Requirement\n\nWithout the red inverter, node A is **floating** when the CK switch opens (hold phase). Subthreshold and junction leakage slowly discharges (or charges) node A, corrupting the stored value. This mandates a **minimum clock frequency** to refresh before the value is lost.\n\nWith the keeper:\n\n- During **hold** (CK = 0, switch open): The red inverter senses B = ¬A and actively drives A back to its correct value, **counteracting leakage indefinitely**. No refresh is needed.\n- During **transparent** (CK = 1, switch closed): The input overwrites node A through the switch.\n\n### Critical Design Constraint\n\nThe red inverter **must be weak** (undersized, small W/L):\n\n$$\\frac{(W/L)_\\text{red}}{(W/L)_\\text{Inv1}} \\ll 1$$\n\nThis ensures the input driver can overpower the keeper during the transparent phase without large contention current. If the keeper were full-strength, it would fight every write operation, causing excessive static power and slow transitions.\n\n```\n              Weak keeper (red)\n         ┌────[weak inv]────┐\n         │     input→output │\n CK  A   │        B        │\n─/─→─────┴──[Inv1]──────────┴──/─→ (slave)\n         ↑ held against        CK̄\n         │ leakage\n```\n\nIn summary: the red inverter converts a **dynamic** (charge-storage) latch into a **quasi-static** one, at the cost of a small drive-strength penalty during write.",
        "format": "markdown",
        "sha256": "30115b19a3291ece3051ef25dfc4b1b00dadef73a09df75a54af8695391f629f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses the red inverter’s connections and repeats the keeper interpretation the golden solution rejects. It misses the feedforward bypass and its low-frequency failure mode, and reaches the opposite conclusion about the minimum clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1279,
        "output_tokens": 17290,
        "total_tokens": 18569,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16652,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1279,
        "output_tokens": 17290,
        "total_tokens": 18569,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16652,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# NF Optimization of the Shunt-Feedback CMOS Inverter LNA\n\n## Circuit Operation\n\nThis circuit is a **CMOS inverter** (M₁ NMOS + M₂ PMOS) with shunt-feedback resistor R_F. The combined transconductance is:\n$$G_m = g_{m1} + g_{m2}$$\n\n## Input Resistance and Matching Constraint\n\nThe shunt feedback sets the input resistance to:\n$$R_{in} = \\frac{R_F}{1 + G_m R_L}$$\n\nEnforcing **R_in = R_S = 50 Ω** requires:\n$$\\boxed{R_F = R_S\\left(1 + G_m R_L\\right)}$$\n\n## Noise Figure Derivation\n\nThree noise sources dominate (all referred to the input):\n\n| Source | Input-Referred $\\overline{v_n^2}$ | NF Contribution |\n|--------|----------------------------------|-----------------|\n| $R_F$ thermal noise | $4kT R_S^2 / R_F$ | $R_S/R_F$ |\n| M₁, M₂ drain noise | $4kT\\gamma/G_m$ | $\\gamma/(G_m R_S)$ |\n\nSubstituting the matching constraint:\n\n$$\\boxed{NF = 1 + \\underbrace{\\frac{1}{1 + G_m R_L}}_{\\text{R}_F\\text{ term}} + \\underbrace{\\frac{\\gamma}{G_m R_S}}_{\\text{transistor term}}}$$\n\n## Optimization Strategy\n\nSince $\\partial(\\text{NF})/\\partial G_m < 0$ always, **both NF terms decrease monotonically as $G_m$ increases**:\n\n$$\\text{As } G_m \\uparrow \\quad\\Rightarrow\\quad \\begin{cases} \\frac{1}{1+G_m R_L} \\downarrow & \\Rightarrow R_F \\uparrow, \\text{ less } R_F \\text{ noise} \\\\ \\frac{\\gamma}{G_m R_S} \\downarrow & \\Rightarrow \\text{transistor noise } \\downarrow \\end{cases}$$\n\n**To minimize NF with R_in = 50 Ω:**\n\n1. **Maximize** $G_m = g_{m1} + g_{m2}$ by increasing **transistor widths** W (or bias current)\n2. **Adjust** $R_F = 50(1 + G_m R_L)$ upward to maintain matching\n3. The CMOS topology is advantageous: M₂ doubles $G_m$ at no extra supply current, inherently suppressing both noise terms\n\n## Fundamental Limit\n\n$$NF \\xrightarrow{G_m \\to \\infty} 1 \\quad (0 \\text{ dB})$$\n\nIn practice, the minimum NF is limited by power consumption, flicker noise, gate resistance, and input capacitance (bandwidth). The design trade-off is: **more transconductance (larger W, more I_D) → lower NF, at the cost of power and bandwidth.**",
        "format": "markdown",
        "sha256": "a106253e31aa12432586b8466e87a759e38d7120867ea1c17de0d7a1cb2b987c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The main optimization is right: increase gm and raise RF to preserve the 50 Ω match, reducing NF below 1 + γ. However, the matching relation omits the finite-output-resistance numerator term (RF + ro), so it does not accurately establish the key finite-ro mechanism.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1589,
        "output_tokens": 31348,
        "total_tokens": 32937,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30555,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1589,
        "output_tokens": 31348,
        "total_tokens": 32937,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30555,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Optimizing NF of the Shunt-Feedback LNA\n\n## Circuit Overview\n\nThis is a **shunt-feedback LNA** where:\n- **M₁** (NMOS): main amplifying transistor with transconductance $g_{m1}$\n- **M₂** (PMOS): drain load with equivalent resistance $R_D$\n- **R_F**: feedback resistor setting both matching and loop gain\n\n## Step 1: Input Resistance Constraint\n\nUsing the Miller effect, the input resistance is:\n\n$$R_{in} = \\frac{R_F}{1 + A} = 50\\ \\Omega$$\n\nwhere $A = g_{m1} \\cdot R_D$ is the **open-loop voltage gain**. This gives:\n\n$$\\boxed{R_F = 50\\,(1 + A)}$$\n\n## Step 2: Noise Figure Expression\n\nThe three main noise contributions (referred to output) yield:\n\n| Source | Contribution to NF |\n|--------|-------------------|\n| $R_F$ thermal noise | $\\dfrac{R_S}{R_F} = \\dfrac{1}{1+A}$ |\n| M₁ drain noise | $\\dfrac{\\gamma}{g_{m1} R_S}$ |\n| M₂ drain noise | $\\dfrac{\\gamma g_{m2}}{g_{m1}^2 R_S} \\approx \\dfrac{\\gamma}{A\\, g_{m1} R_S}$ (small for large $A$) |\n\n$$\\boxed{NF \\approx 1 + \\underbrace{\\frac{1}{1+A}}_{\\text{from }R_F} + \\underbrace{\\frac{\\gamma}{g_{m1}R_S}}_{\\text{from }M_1}}$$\n\n## Step 3: Optimization Strategy\n\nBoth noise terms **decrease monotonically** as $A = g_{m1}R_D$ increases. Therefore:\n\n> **Maximize the open-loop gain $A$** while adjusting $R_F = 50(1+A)$ to maintain matching.\n\n| Action | Effect |\n|--------|--------|\n| ↑ $g_{m1}$ (increase $W_1/L_1$ or bias current) | Reduces $\\gamma/(g_{m1}R_S)$ directly |\n| ↑ $R_D$ (use current-source load instead of diode-connected M₂) | Increases $A$, reduces both terms |\n| ↑ $R_F$ proportionally | Maintained automatically by $R_F = 50(1+A)$ |\n\n## Key Insight\n\nAs $A \\to \\infty$:\n$$NF \\to 1 \\quad (0\\ \\text{dB})$$\n\nPractically, NF improves if M₂ is changed from **diode-connected** ($R_D \\approx 1/g_{m2}$, low impedance) to a **high-impedance current source** ($R_D \\approx r_{o1}\\|r_{o2}$), dramatically increasing $A$ at no extra power cost, with $R_F$ scaled up accordingly to preserve $R_{in} = 50\\ \\Omega$.",
        "format": "markdown",
        "sha256": "fe71b8e9bef43c1751ff79ba28305c529d211318af565cbe4a084efae107a11b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The broad recommendation to raise gm and retune RF to preserve the match is aligned with the solution, and the answer recognizes that increasing gm can reduce the transistor-noise term. However, it omits the finite-ro input-resistance relation that is central here, mischaracterizes M2 as only a load, and incorrectly implies that increasing A alone makes NF approach 1. These are significant modeling errors, but the main design direction is right.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1589,
        "output_tokens": 33511,
        "total_tokens": 35100,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32725,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1589,
        "output_tokens": 33511,
        "total_tokens": 35100,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32725,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# NF Optimization of the CMOS Inverter Shunt-Feedback LNA\n\n## Circuit Analysis\n\nThis topology consists of M₁ (NMOS) and M₂ (PMOS) with both gates at the input (CMOS inverter), shunt feedback resistor R_F from output to input, and coupling capacitor C₁.\n\n## Input Matching Constraint\n\nUsing the shunt-shunt feedback analysis (with the inverting gain $A_v = -(g_{m1}+g_{m2})R_F$):\n\n$$R_{in} = \\frac{R_F}{1 + (g_{m1}+g_{m2})R_F} \\approx \\frac{1}{g_{m1}+g_{m2}}$$\n\nFor $R_{in} = R_s = 50\\ \\Omega$, this **fixes the total transconductance**:\n$$\\boxed{g_m = g_{m1} + g_{m2} = \\frac{1}{R_s} = 20\\ \\text{mS}}$$\n\nThis condition is independent of R_F — the matching is maintained for any R_F.\n\n## Noise Figure Expression\n\nWith the matched condition ($g_m R_s = 1$), the NF has two contributions:\n\n| Source | Contribution to F |\n|--------|-------------------|\n| Thermal noise of $R_F$ | $R_s/R_F$ |\n| Channel noise (M₁ + M₂) | $\\gamma\\cdot g_m \\cdot R_s = \\gamma$ |\n\n$$\\boxed{F \\approx 1 + \\frac{R_s}{R_F} + \\gamma}$$\n\n## Optimization Strategy\n\nSince $g_m = 1/R_s$ is **locked** by the matching constraint, the **only free parameter** is $R_F$.\n\n$$\\frac{dF}{dR_F} = -\\frac{R_s}{R_F^2} < 0 \\quad \\Rightarrow \\quad F \\text{ decreases monotonically with } R_F$$\n\n**Conclusion: Maximize $R_F$**\n\nAs $R_F \\to \\infty$:\n- Noise contribution of $R_F$ vanishes: $R_s/R_F \\to 0$  \n- Signal gain increases: $|A_v| = g_m R_F \\to \\infty$\n\n$$\\text{NF}_{\\min} = 10\\log(1 + \\gamma) \\approx 2.2\\ \\text{dB} \\quad (\\gamma = 2/3)$$\n\n## Summary\n\n```\n       Increasing RF →\n                           NF (dB)\n   12 |●  (RF = 100 Ω)\n    4 |     ●  (RF = 500 Ω)\n  2.2 |_______________●  (RF → ∞, NF_min)\n      ──────────────────────────────→ RF\n```\n\nThe minimum NF ($1+\\gamma$) is set **entirely by the transistor channel noise** — it represents the fundamental limit of this topology for $R_{in} = 50\\ \\Omega$.\n\n**Additional advantage of the CMOS inverter**: Both M₁ and M₂ contribute to $g_m = g_{m1}+g_{m2}$ at the same bias current $I_D$ (they share the DC path), achieving the matching condition with **half the power** compared to a single-NMOS design at equivalent NF.",
        "format": "markdown",
        "sha256": "022e26aa004b508d72ce498710301d71f152c4403652576927ae25ed849f6a9b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The topology is identified correctly, but the answer assumes Rin ≈ 1/gm, fixes gm at 1/Rs, and concludes NF cannot fall below 1 + γ. It misses the finite-output-resistance relation that permits increasing gm and RF together while keeping Rin matched and lowering NF.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1589,
        "output_tokens": 89409,
        "total_tokens": 90998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 88544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1589,
        "output_tokens": 89409,
        "total_tokens": 90998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 88544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Input Impedance of the Feedback TIA Circuit\n\n## Circuit Analysis Strategy\n\nThis circuit is a **transimpedance amplifier (TIA)** with shunt-shunt feedback via $R_F$. I'll apply the **Miller effect** to find $Z_{in}$.\n\n## Step 1: KCL at Node P\n\nApplying KCL at the input node P:\n\n$$I_{in} = \\frac{V_P}{R_{in}} + sC_{in}V_P + \\frac{V_P - V_{out}}{R_F}$$\n\nUsing $V_{out} = A_v \\cdot V_P$:\n\n$$I_{in} = V_P\\!\\left(\\frac{1}{R_{in}} + sC_{in} + \\frac{1-A_v}{R_F}\\right)$$\n\nTherefore:\n\n$$\\boxed{Z_{in} = R_{in} \\,\\Big\\|\\, \\frac{1}{sC_{in}} \\,\\Big\\|\\, \\frac{R_F}{1-A_v}}$$\n\n## Step 2: Compute the Total Voltage Gain $A_v$\n\n**Stage 1 — $M_1$ (NMOS common-source with $R_{D1}$):**\n\n$$v_X = -g_{m1}R_{D1}\\,v_P \\implies A_1 = -g_{m1}R_{D1}$$\n\n**Stage 2 — PMOS differential pair ($M_2$–$M_3$ with $I_{SS}$):**\n\nApplying KCL at the common-source node $v_s$ (with $M_3$ gate at AC ground):\n\n$$(g_{m2}+g_{m3})\\,v_s = g_{m2}\\,v_X \\implies v_s = \\frac{v_X}{2}$$\n\nThe small-signal current in $M_3$: $i_{d3} = g_{m3}\\,v_s = \\dfrac{g_m v_X}{2}$\n\nOutput voltage:\n\n$$v_{out} = i_{d3}\\,R_{D2} = \\frac{g_m R_{D2}}{2}\\,v_X \\implies A_2 = +\\frac{g_{m2}R_{D2}}{2}$$\n\n**Total gain** (two stages):\n\n$$A_v = A_1 \\cdot A_2 = -\\frac{g_{m1}g_{m2}R_{D1}R_{D2}}{2} \\quad (<0, \\text{ inverting})$$\n\n## Step 3: Input Impedance\n\nSubstituting into the Miller result:\n\n$$1 - A_v = 1 + \\frac{g_{m1}g_{m2}R_{D1}R_{D2}}{2}$$\n\n$$\\boxed{Z_{in} = R_{in} \\,\\Bigg\\|\\, \\frac{R_F}{1+\\dfrac{g_{m1}g_{m2}R_{D1}R_{D2}}{2}}}$$\n\n## Physical Interpretation\n\n| Condition | $Z_{in}$ |\n|-----------|----------|\n| No feedback ($R_F \\to \\infty$) | $Z_{in} = R_{in}$ |\n| Large loop gain $\\left(\\frac{g_{m1}g_{m2}R_{D1}R_{D2}}{2} \\gg 1\\right)$ | $Z_{in} \\approx \\dfrac{2R_F}{g_{m1}g_{m2}R_{D1}R_{D2}}$ |\n\nThe negative feedback via $R_F$ reduces the input impedance by the loop gain factor — the fundamental advantage of a TIA for detecting small currents.",
        "format": "markdown",
        "sha256": "b1f815904301139bab3d576102c21d13870c7c4b3b290435299b2e422ab08736"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the shunt-feedback TIA, derives the relevant gain, and gets the qualitative impedance reduction. But it misses the output resistance contribution: the exact result is (RF + RD2)/(1 + A0), not RF/(1 + A0). It also introduces an unsupported Rin shunt, so the computed input impedance is not the circuit’s exact result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 221,
        "output_tokens": 58782,
        "total_tokens": 59003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 57851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 221,
        "output_tokens": 58782,
        "total_tokens": 59003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 57851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Input Impedance of the Transimpedance Amplifier (TIA)\n\n## Circuit Identification\n\nThis circuit is a **Transimpedance Amplifier (TIA)** with:\n- **Input node P**: current source $I_{in}$, coupling capacitor $C_{in}$, and bias resistor $R_{in}$ to ground\n- **Multi-stage inverting amplifier**: $M_1$ (common-source with load $R_{D1}$), followed by stages with $M_2$, $M_3$, and $I_{SS}$\n- **Feedback network**: $R_F$ connecting $V_{out}$ back to node P\n\n## Derivation\n\nLet the open-loop voltage gain from P to $V_{out}$ be $A_v = -A$ (inverting), so:\n$$V_{out} = -A \\cdot V_P, \\quad A > 0$$\n\nApplying KCL at node P, the total current flowing **out** of P:\n\n| Path | Current |\n|------|---------|\n| Through $R_{in}$ | $I_1 = \\dfrac{V_P}{R_{in}}$ |\n| Through $R_F$ | $I_2 = \\dfrac{V_P - V_{out}}{R_F} = \\dfrac{V_P(1+A)}{R_F}$ |\n\nTherefore:\n$$I_{in} = \\frac{V_P}{R_{in}} + \\frac{V_P(1+A)}{R_F}$$\n\n## Result\n\n$$\\boxed{Z_{in} = R_{in} \\,\\Big\\|\\, \\frac{R_F}{1+A}}$$\n\nwhere $A$ is the total open-loop gain magnitude of the amplifier chain.\n\n## Physical Interpretation\n\nThe feedback resistor $R_F$ appears at the input with its value **reduced by $(1+A)$** — a direct consequence of the Miller effect. The open-loop gain is:\n\n$$A = \\underbrace{g_{m1}R_{D1}}_{\\text{Stage 1}} \\times \\underbrace{(\\text{gain of }M_2\\text{, }M_3)}_{\\text{Subsequent stages}}$$\n\nFor large open-loop gain ($A \\gg 1$):\n\n$$Z_{in} \\approx \\frac{R_F}{A} \\ll R_F$$\n\nThis very low input impedance is the key advantage of a TIA — it converts the input current directly to output voltage ($V_{out} \\approx -I_{in} \\cdot R_F$) while maintaining high bandwidth.",
        "format": "markdown",
        "sha256": "9a586fd410f251713d816f7969668f47f613c29138baba2fedeb7c9305521c23"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that feedback Miller-reduces the input resistance, but gives the wrong result: it omits the output resistance term, so the exact expression should be (RF + RD2)/(1 + A0). The added parallel Rin is also unsupported by the stated model.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 221,
        "output_tokens": 29282,
        "total_tokens": 29503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28644,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 221,
        "output_tokens": 29282,
        "total_tokens": 29503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28644,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Input Impedance of the Feedback Amplifier\n\n## Circuit Topology Identification\n\nThe circuit is a **two-stage feedback transimpedance amplifier**:\n- **Stage 1:** M₁ (NMOS common-source) with drain load R_D1 → Node X\n- **Stage 2:** M₂–M₃ (PMOS differential pair) with tail current I_SS from V_DD\n  - Gate of M₂ at X (signal input), Gate of M₃ at V_b (AC ground)\n  - Output at drain of M₃ through R_D2 to GND\n- **Feedback:** R_F connects V_out back to gate of M₁ (Node P)\n- **Input bias:** R_in from P to AC ground\n\n## Open-Loop Gain Analysis\n\n**Stage 1** (M₁ CS amplifier):\n$$v_X = -g_{m1}R_{D1}\\,v_P$$\n\n**Stage 2** (PMOS differential pair with ideal I_SS):\n\nUsing KCL at the common source node ($v_{CS}$):\n$$g_{m2}(v_{CS}-v_X) + g_{m3}\\,v_{CS} = 0 \\implies v_{CS} = \\frac{v_X}{2}$$\n\nThe drain current of M₃: $\\;i_{D3} = \\dfrac{g_{m2}}{2}\\,v_X$ flows into V_out, giving:\n$$v_{out} = \\frac{g_{m2}\\,R_{D2}}{2}\\,v_X$$\n\n**Combined open-loop gain:**\n$$A_v = \\frac{v_{out}}{v_P} = \\left(-g_{m1}R_{D1}\\right)\\cdot\\left(\\frac{g_{m2}R_{D2}}{2}\\right) = -\\frac{g_{m1}g_{m2}R_{D1}R_{D2}}{2}$$\nThe negative sign confirms **negative feedback** via R_F. ✓\n\n## Input Impedance Derivation\n\nApply a test voltage $v_P$ at node P. Currents leaving P:\n\n$$I_{test} = \\underbrace{\\frac{v_P}{R_{in}}}_{\\text{via }R_{in}} + \\underbrace{\\frac{v_P - v_{out}}{R_F}}_{\\text{via }R_F}$$\n\nSubstituting $v_{out} = -\\dfrac{g_{m1}g_{m2}R_{D1}R_{D2}}{2}\\,v_P$:\n\n$$I_{test} = v_P\\!\\left[\\frac{1}{R_{in}} + \\frac{1 + \\dfrac{g_{m1}g_{m2}R_{D1}R_{D2}}{2}}{R_F}\\right]$$\n\nTherefore:\n\n$$\\boxed{Z_{in} = R_{in} \\,\\Big\\|\\, \\frac{R_F}{1 + \\dfrac{g_{m1}g_{m2}R_{D1}R_{D2}}{2}}}$$\n\n## Physical Interpretation\n\n| Condition | Result |\n|-----------|--------|\n| General | $R_{in} \\| \\dfrac{R_F}{1 + T}$, where $T = \\dfrac{g_{m1}g_{m2}R_{D1}R_{D2}}{2}$ |\n| Large loop gain ($T \\gg 1$) | $Z_{in} \\approx \\dfrac{2R_F}{g_{m1}g_{m2}R_{D1}R_{D2}}$ |\n\nThe $(1+T)$ denominator factor reflects the **Miller effect**: feedback lowers the input impedance, creating a **virtual ground** at node P — which is essential for accurate transimpedance operation.",
        "format": "markdown",
        "sha256": "2839cc10adadbac742b18ab617261759a90f75b67247386a1cf3220698c17c0a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It captures the negative-feedback/Miller reduction and the unloaded gain, but omits the amplifier output resistance in the exact result and adds an unsupported input shunt. The required impedance is (RF + RD2)/(1 + A0), not RF/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 221,
        "output_tokens": 66786,
        "total_tokens": 67007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 65832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 221,
        "output_tokens": 66786,
        "total_tokens": 67007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 65832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# VCO Phase Noise Due to LDO Thermal Noise\n\n## Noise Coupling Mechanism\n\nThe LDO output thermal noise $v_n(t)$ (with PSD $S_{th}$) appears directly on the VCO supply rail $V_{out}$, which feeds the tops of both inductors $L_1$. This common-mode supply perturbation modulates the oscillation frequency through **supply pushing** — primarily via voltage-dependent tank capacitances (M₁, M₂ junction caps, and varactors Mv₁, Mv₂).\n\n## Step-by-Step Derivation\n\n### Step 1: Define Supply Pushing Coefficient\n\nCharacterize the VCO's frequency sensitivity to supply voltage:\n$$K_{VDD} = \\frac{\\partial \\omega_0}{\\partial V_{supply}} \\quad [\\text{rad/s/V}]$$\n\n### Step 2: Model Instantaneous Frequency\n\nThe supply noise creates a frequency-modulated output:\n$$\\omega(t) = \\omega_0 + K_{VDD}\\cdot v_n(t)$$\n\nThe excess phase accumulates as:\n$$\\phi(t) = K_{VDD}\\int_0^t v_n(\\tau)\\,d\\tau$$\n\n### Step 3: Compute Phase Noise PSD\n\nTaking the Fourier transform:\n$$\\Phi(j\\Delta\\omega) = \\frac{K_{VDD}}{j\\Delta\\omega}\\,V_n(j\\Delta\\omega)$$\n\nThe excess phase PSD becomes:\n$$S_\\phi(\\Delta\\omega) = \\frac{K_{VDD}^2}{(\\Delta\\omega)^2}\\,S_{th}$$\n\n### Step 4: Single-Sideband Phase Noise\n\n$$\\boxed{\\mathcal{L}(\\Delta\\omega) = \\frac{1}{2}S_\\phi(\\Delta\\omega) = \\frac{K_{VDD}^2\\cdot S_{th}}{2(\\Delta\\omega)^2}}$$\n\n## Total VCO Phase Noise\n\nCombining the LDO contribution with the intrinsic oscillator noise (Leeson's model):\n\n$$\\mathcal{L}_{total}(\\Delta\\omega) = \\underbrace{\\frac{2FkT}{P_s}\\left(\\frac{\\omega_0}{2Q\\,\\Delta\\omega}\\right)^2}_{\\text{intrinsic VCO noise}} + \\underbrace{\\frac{K_{VDD}^2\\cdot S_{th}}{2(\\Delta\\omega)^2}}_{\\text{LDO supply noise}}$$\n\n## Key Observations\n\n| Property | Result |\n|----------|--------|\n| Frequency slope | −20 dB/decade (white noise → 1/Δω²) |\n| LDO noise negligible when | $K_{VDD}^2 S_{th} \\ll \\dfrac{FkT\\,\\omega_0^2}{P_s Q^2}$ |\n| Differential rejection | Ideal symmetry rejects CM supply noise **directly**, but nonlinear tank caps still cause FM |\n\nThe −20 dB/decade slope from white LDO noise is **identical** in shape to the thermal-noise region of Leeson's model, making these two contributions indistinguishable in a measured spectrum — highlighting why minimizing both $K_{VDD}$ and $S_{th}$ is critical in LDO-powered VCO design.",
        "format": "markdown",
        "sha256": "9a53750c33af88dadeaf3b2c0576a8c8531fcc22ae61e7dc2b620f078f89166a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, uses the supply-to-frequency sensitivity, and derives the expected phase-noise dependence proportional to K²Sth/Δω². It also recognizes the varactor coupling and the benefit of reducing supply sensitivity; the extra discussion does not alter the core result.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1601,
        "output_tokens": 5519,
        "total_tokens": 7120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4678,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1601,
        "output_tokens": 5519,
        "total_tokens": 7120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4678,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# VCO Phase Noise from LDO Supply Noise\n\n## Noise Coupling Mechanism\n\nThe LDO output voltage $V_{out}$ supplies the VCO tank through inductors $L_1$. Since inductors are short circuits at DC, the common-mode level at nodes X and Y tracks the supply:\n$$V_{CM} \\approx V_{out}$$\n\nThis means LDO noise **modulates the varactor effective bias voltage** (via $V_{CM} - V_{cont}$), perturbing the oscillation frequency.\n\n## Step-by-Step Derivation\n\n### Step 1: Define Supply Sensitivity\nThe VCO supply pushing factor (∂ω₀/∂V_supply) characterizes how supply perturbations shift frequency:\n$$K_{V,\\text{sup}} = \\frac{\\partial\\,\\omega_0}{\\partial V_{out}} \\quad \\left[\\frac{\\text{rad/s}}{\\text{V}}\\right]$$\n\nFor this topology, the dominant mechanism is varactor capacitance modulation:\n$$K_{V,\\text{sup}} \\approx -\\frac{\\omega_0}{2C_\\text{tot}}\\cdot\\frac{\\partial C_{var}}{\\partial V}$$\n\n### Step 2: Frequency Modulation by Supply Noise\nThe LDO thermal noise $v_n(t)$ with PSD $S_{th}$ [V²/Hz] modulates the instantaneous frequency:\n$$\\omega(t) = \\omega_0 + K_{V,\\text{sup}}\\cdot v_n(t)$$\n\n### Step 3: Phase Accumulation\nThe resulting excess phase is:\n$$\\varphi(t) = K_{V,\\text{sup}} \\int_{-\\infty}^{t} v_n(\\tau)\\,d\\tau$$\n\nTaking the PSD (integration → division by $j2\\pi f$ in frequency domain):\n\n$$\\boxed{S_\\varphi(\\Delta f) = \\frac{K_{V,\\text{sup}}^2 \\cdot S_{th}}{(2\\pi\\,\\Delta f)^2}}$$\n\n### Step 4: Single-Sideband Phase Noise\n\n$$\\boxed{\\mathcal{L}(\\Delta f) = \\frac{S_\\varphi(\\Delta f)}{2} = \\frac{K_{V,\\text{sup}}^2 \\cdot S_{th}}{8\\pi^2\\,\\Delta f^2}}$$\n\n## Interpretation\n\n| Feature | Result |\n|---|---|\n| Slope | −20 dB/decade (1/Δf²) |\n| Close-in noise | Worse for high $K_{V,\\text{sup}}$ or high $S_{th}$ |\n| Mitigation | Reduce LDO output impedance; use differential supply rejection |\n\nThis contribution adds to the VCO's intrinsic thermal noise (from tank loss and transistor noise), giving the total phase noise as the **sum of all independent contributions**.",
        "format": "markdown",
        "sha256": "ae6e14906ffdf070b4da30a22cfb114b013191cbf792b1030f69bc06de9c6101"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The supply-pushing mechanism and FM-to-phase-noise conversion are correct, including the equivalent angular-frequency formula and 1/Δf² dependence. It recognizes direct varactor coupling but omits the explicit Kpush–KVCO connection and the resulting KVCO-reduction design insight.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1601,
        "output_tokens": 4575,
        "total_tokens": 6176,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3841,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1601,
        "output_tokens": 4575,
        "total_tokens": 6176,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3841,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# VCO Phase Noise from LDO Thermal Noise\n\n## Mechanism: Supply Noise → Frequency Modulation\n\nThe LDO output noise $v_n(t)$ (with spectrum $S_{th}$) rides on $V_\\text{out}$, which powers the VCO. The critical coupling path proceeds as follows:\n\n$$\\underbrace{v_n \\text{ on } V_\\text{out}}_{\\text{supply noise}} \\xrightarrow{\\text{CM shift at X,Y}} \\underbrace{\\Delta V_\\text{var}}_{\\text{varactor bias change}} \\xrightarrow{\\Delta C_\\text{var}} \\underbrace{\\Delta \\omega_0}_{\\text{frequency deviation}}$$\n\nSince $M_{v1}$, $M_{v2}$ have gates at $V_\\text{cont}$ (fixed) and sources at nodes X, Y (which track $V_\\text{out}$ in common mode), a supply perturbation $\\delta V$ shifts the varactor voltage by $-\\delta V$.\n\n## Step 1: Compute VCO Supply Pushing $K_{VDD}$\n\nUsing $\\omega_0 = 1/\\sqrt{L_1 C_\\text{total}}$:\n\n$$K_{VDD} = \\frac{\\partial \\omega_0}{\\partial V_\\text{supply}} = \\underbrace{-\\frac{\\omega_0}{2C_\\text{total}}}_{\\partial\\omega_0/\\partial C_\\text{var}} \\cdot \\underbrace{\\frac{\\partial C_\\text{var}}{\\partial V_\\text{var}}}_{\\text{varactor slope}} \\cdot \\underbrace{(-1)}_{\\partial V_\\text{var}/\\partial V_\\text{supply}} = \\frac{\\omega_0}{2C_\\text{total}}\\frac{\\partial C_\\text{var}}{\\partial V_\\text{var}}$$\n\n## Step 2: Frequency-Noise Spectrum\n\nThe supply noise converts to a frequency-noise PSD:\n\n$$S_{\\Delta\\omega}(\\omega_m) = K_{VDD}^2 \\cdot S_{th}$$\n\n## Step 3: FM → PM via Integration\n\nSince $\\phi(t) = \\int \\omega(\\tau)\\,d\\tau$, division by $j\\omega$ in the frequency domain gives:\n\n$$S_\\phi(\\omega_m) = \\frac{S_{\\Delta\\omega}(\\omega_m)}{\\omega_m^2} = \\frac{K_{VDD}^2\\, S_{th}}{\\omega_m^2}$$\n\n## Result: Output Phase Noise\n\nThe single-sideband phase noise (in dBc/Hz) at offset $\\Delta\\omega$ is:\n\n$$\\boxed{\\mathcal{L}(\\Delta\\omega) = \\frac{K_{VDD}^2 \\cdot S_{th}}{2\\,\\Delta\\omega^2}}$$\n\n| Quantity | Description |\n|----------|-------------|\n| $S_{th}$ [V²/Hz] | LDO output-referred thermal noise PSD |\n| $K_{VDD}$ [rad/s/V] | VCO supply pushing coefficient |\n| $\\Delta\\omega$ | Offset from carrier |\n\nThis term adds to the intrinsic (Leeson) phase noise, and its **1/f² slope** (20 dB/decade) means the LDO noise dominates at small offsets. Minimizing $K_{VDD}$ (through careful varactor biasing) or reducing $S_{th}$ (through better LDO design) directly lowers this noise floor.",
        "format": "markdown",
        "sha256": "7d2f035604abfc5401071fb195b2a9eccf8f18f0406eaeeedad8e324f9342c6b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing through the varactors and converts the LDO noise using the pushing gain and FM-to-phase integration, yielding the required 1/Δω² dependence. The design takeaway to reduce supply pushing is also present; the linear-versus-dB notation is nonessential.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1601,
        "output_tokens": 6434,
        "total_tokens": 8035,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5536,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1601,
        "output_tokens": 6434,
        "total_tokens": 8035,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5536,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Effect of Tail Capacitor $C_T$ on Phase Noise\n\n### Key Observation: Signal at the Tail Node\n\nIn a cross-coupled LC oscillator, the drain currents of M₁ and M₂ are:\n$$I_{D1} = \\frac{I_{SS}}{2} + i_1\\cos(\\omega_0 t), \\qquad I_{D2} = \\frac{I_{SS}}{2} - i_1\\cos(\\omega_0 t)$$\n\nTheir **sum at node P** cancels the fundamental, leaving a component at **2ω₀**:\n$$I_P = I_{D1} + I_{D2} = I_{SS} + \\text{(harmonics at } 2\\omega_0\\text{)}$$\n\n### Noise Upconversion Mechanism (Without $C_T$)\n\nThe tail current source $I_{SS}$ produces noise $\\overline{i_n^2}$ at $2\\omega_0$. Because the tail impedance $Z_P$ is high at $2\\omega_0$ (output impedance of the current source), node P develops a large $2\\omega_0$ voltage swing. This swing **mixes with the $\\omega_0$ oscillation** via the nonlinearity of M₁/M₂, folding noise from $2\\omega_0$ **down to $\\omega_0$**, directly degrading phase noise.\n\n### Effect of Adding $C_T$\n\n$C_T$ creates a **low-impedance path at $2\\omega_0$**:\n$$|Z_{C_T}(2\\omega_0)| = \\frac{1}{2\\omega_0 C_T} \\ll R_\\text{tail}$$\n\n| Effect | Result |\n|---|---|\n| $2\\omega_0$ noise current bypassed through $C_T$ | Less flows through M₁/M₂ |\n| $2\\omega_0$ voltage swing at P suppressed | Less mixing/noise folding |\n| Noise upconversion $2\\omega_0 \\to \\omega_0$ reduced | Direct improvement in $\\mathcal{L}(\\Delta\\omega)$ |\n\n### Result\n\n> **Phase noise decreases (improves).** $C_T$ short-circuits the tail node at $2\\omega_0$, suppressing the voltage swing at P and thereby reducing the downconversion of tail-source noise from $2\\omega_0$ to $\\omega_0$. The effective ISF (Impulse Sensitivity Function) of the tail current source is reduced, lowering its noise contribution to the phase noise by several dB.",
        "format": "markdown",
        "sha256": "3424fd831ec67f0e0da2b67f68eb89b8d618f654c7d8d0f1b3542425a4948ceb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that adding CT monotonically improves phase noise by filtering the tail-node signal/noise. The golden solution says the effect is nonmonotonic and includes class-C improvement and possible degradations, so this misses the central result.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 4108,
        "total_tokens": 5686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3472,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 4108,
        "total_tokens": 5686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3472,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Effect of Tail Capacitor $C_T$ on Phase Noise\n\n### Mechanism at Node P\n\nIn a cross-coupled LC oscillator, the tail node **P** is a **common-mode node** that carries signals at **2ω₀** (not ω₀). This arises because:\n\n$$I_{D1} + I_{D2} \\propto V_0^2\\bigl(1 + \\cos(2\\omega_0 t)\\bigr)$$\n\nso the common-mode current forces a **second-harmonic ripple** at node P.\n\n---\n\n### Why $C_T$ Helps\n\nThe tail current source $I_{SS}$ produces noise $\\overline{i_n^2}$ that contributes to phase noise through **two mixing paths**:\n\n| Noise Frequency | Mixing Action | Result |\n|---|---|---|\n| Near **2ω₀** (thermal) | Downconverted by ω₀ switching | Noise at ω₀ → phase noise |\n| Near **DC** (flicker, 1/f) | Upconverted via the 2ω₀ ripple at P | Noise at ω₀ → phase noise |\n\nAdding $C_T$ to node P creates a **low-impedance short at 2ω₀**:\n\n$$Z_P(2\\omega_0) = \\frac{1}{j\\,2\\omega_0 C_T} \\ll Z_{\\text{tail}}$$\n\nThis **suppresses the 2ω₀ voltage ripple** at P, breaking both noise paths above.\n\n---\n\n### Conclusion\n\n$$\\boxed{\\text{Phase noise } \\textbf{decreases} \\text{ (improves)}}$$\n\nSpecifically:\n- **Thermal noise** from $I_{SS}$ near 2ω₀ is bypassed to ground by $C_T$, preventing its downconversion to ω₀.\n- **Flicker noise** upconversion is reduced because the 2ω₀ amplitude at P (which drives the upconversion) is suppressed.\n\nThe improvement scales as $\\sim 20\\log(2\\omega_0 C_T R_P)$ dB (for $2\\omega_0 C_T R_P \\gg 1$), making $C_T$ a simple yet effective design technique in LC VCO layouts.",
        "format": "markdown",
        "sha256": "383cc8952b43437eaa717c1835e0fcac612227ddb99df8f96ab8f181b58ccf45"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that adding CT monotonically improves phase noise by filtering the tail-node ripple. The golden solution says the effect is nonmonotonic, with flicker-noise upconversion, class-C improvement, and possible instability or triode operation depending on CT.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 7163,
        "total_tokens": 8741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6583,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 7163,
        "total_tokens": 8741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6583,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Effect of Tail Capacitor $C_T$ on Phase Noise\n\n### Role of the Tail Node\n\nIn this cross-coupled LC oscillator, node **P** carries the **sum** of M₁ and M₂ drain currents. Because M₁ and M₂ switch alternately at $\\omega_0$, their combined current has a dominant component at **2ω₀** (the second harmonic), plus the noise of $I_{SS}$.\n\n---\n\n### Why $C_T$ Improves Phase Noise\n\nAdding $C_T$ reduces phase noise through two key mechanisms:\n\n#### 1. Filtering of Tail Current-Source Noise\nThe noise current from $I_{SS}$ sees the impedance at node P:\n\n$$Z_P = \\frac{1}{j\\omega C_T} \\,\\bigg\\|\\, r_{o,\\text{ISS}}$$\n\n| Condition | Impedance at $\\omega_0$ |\n|-----------|------------------------|\n| Without $C_T$ | $\\approx r_{o,\\text{ISS}}$ (high) |\n| With $C_T$ | $\\approx \\frac{1}{j\\omega_0 C_T}$ (low) |\n\n$C_T$ **bypasses the noise current to ground**, preventing it from being injected into the differential pair.\n\n#### 2. Suppression of 2ω₀ Voltage Swing at P\nWithout $C_T$, the second-harmonic current builds up a **large voltage swing at 2ω₀** at node P. This voltage modulates the $V_{SB}$ (source-body voltage) and $g_m$ of M₁/M₂ at 2ω₀, causing **AM-to-PM conversion** that elevates phase noise.\n\n$C_T$ provides a **low-impedance path at 2ω₀**, trapping the harmonic current at node P and suppressing this modulation.\n\n---\n\n### Net Result\n\n$$\\boxed{\\text{Phase noise } \\textbf{decreases} \\text{ (improves)}}$$\n\n$C_T$ acts as a **noise filter and harmonic bypass**, reducing the upconversion of tail-source noise (including flicker noise) and second-harmonic mixing products into phase noise near $\\omega_0$. This is a standard technique for improving LC VCO performance.",
        "format": "markdown",
        "sha256": "8026ceafef76f232b95a1a3b295b98e081e1cb96e3f6303aeb30668caf20f5b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It predicts a monotonic phase-noise improvement from filtering tail noise and 2ω₀ ripple, missing the essential nonmonotonic behavior and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 2860,
        "total_tokens": 4438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2284,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 2860,
        "total_tokens": 4438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2284,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\nThe figure shows a **Quadrature LC VCO (QVCO)** consisting of two identical differential LC oscillators (top and bottom sections) coupled through cross-connections between nodes $X_1 \\leftrightarrow Y_2$ and $Y_1 \\leftrightarrow X_2$. Each section uses:\n- Spiral inductors $L$ as tank elements (at $X_1,Y_1$ and $X_2,Y_2$)\n- Cross-coupled NMOS transistors for negative resistance ($-2/g_m$)\n- Tail current $I_{SS}$ for biasing\n- Coupling current $I_1$ for quadrature phase locking\n\n## Oscillation Frequency Estimate\n\nEach individual LC tank resonates at its natural frequency. The negative resistance from the cross-coupled pair ($G_{\\text{neg}} = -g_m/2$) cancels tank losses to sustain oscillation.\n\n**Resonance condition** for each tank:\n\n$$\\boxed{f_0 \\approx \\frac{1}{2\\pi\\sqrt{LC}}}$$\n\nwhere:\n- $L$ = inductance of each spiral inductor\n- $C$ = total effective tank capacitance (device parasitics $C_{gs}$, $C_{gd}$, $C_{db}$, plus any explicit tuning capacitors)\n\n## Effect of Quadrature Coupling\n\nThe coupling current $I_1$ introduces an additional phase shift that locks the two oscillators in **quadrature** ($90°$ apart), perturbing the frequency slightly:\n\n$$f_{\\text{osc}} = \\frac{1}{2\\pi\\sqrt{LC}}\\cdot\\frac{1}{\\sqrt{1+\\left(\\dfrac{I_1}{I_{SS}}\\right)^2}} \\approx f_0 \\quad \\text{for } I_1 \\ll I_{SS}$$\n\nFor high-$Q$ tanks, this correction is small and the oscillation frequency is well-approximated by the simple LC resonance formula.",
        "format": "markdown",
        "sha256": "fc1bc8e00496b615468c4e711bf2d0e6945acf37eeba4251faeef9c85e87233b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The tank resonance is correct, but the coupling correction is not: it predicts an always-downward, quadratic shift independent of Q, rather than the linear coupling shift proportional to αω₀/(2Q).",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1587,
        "output_tokens": 5617,
        "total_tokens": 7204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1587,
        "output_tokens": 5617,
        "total_tokens": 7204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\nThis is a **coupled quadrature LC oscillator (QVCO)** consisting of two identical differential LC oscillators:\n\n- **Top core:** Cross-coupled PMOS pair with inductors at nodes $X_1$, $Y_1$ (to $V_{DD}$), biased by $I_{SS}$ and $I_1$  \n- **Bottom core:** Cross-coupled NMOS pair with inductors at nodes $X_2$, $Y_2$, biased by $I_{SS}$ and $I_1$  \n- **Coupling:** Cross-connections between boxes force a **90° phase relationship** between $(X_1, Y_1)$ and $(X_2, Y_2)$\n\n## Oscillation Frequency Estimate\n\nEach individual LC tank resonates at its natural frequency. Since the coupling transistors (driven by $I_1$) act as transconductors that transfer energy between the cores without fundamentally altering the tank resonance, the oscillation frequency is:\n\n$$\\boxed{f_{\\rm osc} \\approx \\frac{1}{2\\pi\\sqrt{LC}}}$$\n\nwhere:\n| Symbol | Meaning |\n|--------|---------|\n| $L$ | Inductance of each spiral inductor |\n| $C$ | Total capacitance at each node ($C_{db}+C_{gd}+C_{gs}$ of transistors + any explicit capacitors) |\n\n## Key Notes\n\n1. **Coupling effect on frequency:** The coupling causes a small perturbation:\n$$f_{\\rm osc} \\approx f_0\\sqrt{1 - \\left(\\frac{g_c}{\\omega_0 C}\\right)^2}$$\nFor typical designs where $g_c \\ll \\omega_0 C$, this correction is negligible.\n\n2. **Quadrature outputs:** The two cores oscillate at the same frequency with $X_1/Y_1$ leading (or lagging) $X_2/Y_2$ by **90°**, enabling I/Q signal generation.\n\n3. **Current sources** ($I_{SS}$, $I_1$) set the transconductances and oscillation amplitude, but do **not** set the frequency.",
        "format": "markdown",
        "sha256": "f122788075b86a35892174c5e6505e7126218c7f2bd83f0453ce0ba4260c5756"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The tank resonance term is correct, but the coupling correction is not the required first-order shift proportional to coupling strength and inversely to Q. It instead gives an unrelated second-order correction and incorrectly treats the bias currents as having no frequency effect.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1587,
        "output_tokens": 8300,
        "total_tokens": 9887,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7769,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1587,
        "output_tokens": 8300,
        "total_tokens": 9887,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7769,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "anthropic/claude-sonnet-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\nThis is a **quadrature LC oscillator** consisting of two identical cross-coupled NMOS LC oscillators (top and bottom) that are mutually coupled to enforce a 90° phase relationship between their outputs (X₁/Y₁ and X₂/Y₂).\n\nEach core contains:\n- A differential LC tank (inductor pair to V_DD, with total capacitance C at the tank nodes)\n- A cross-coupled NMOS pair (providing −G_m to cancel tank losses), biased by I_SS\n- Coupling transistors driven by the *other* oscillator's outputs, biased by I₁\n\n---\n\n## Oscillation Frequency Estimate\n\nEach LC tank has a natural resonance at:\n\n$$\\omega_0 = \\frac{1}{\\sqrt{LC}}$$\n\nThe mutual coupling shifts this slightly. For coupling transconductance $g_{m,c}$ (set by $I_1$) and tank capacitance $C$:\n\n$$\\boxed{\\omega_{\\rm osc} = \\sqrt{\\omega_0^2 + \\left(\\frac{g_{m,c}}{C}\\right)^2} \\approx \\frac{1}{\\sqrt{LC}}}$$\n\n| Condition | Result |\n|-----------|--------|\n| Weak coupling ($g_{m,c} \\ll \\omega_0 C$) | $f_{\\rm osc} \\approx \\dfrac{1}{2\\pi\\sqrt{LC}}$ |\n| Strong coupling | Frequency pulls above $f_0$ |\n\n---\n\n## Key Result\n\n$$\\Large f_{\\rm osc} \\approx \\frac{1}{2\\pi\\sqrt{LC}}$$\n\nwhere $L$ is each tank inductance and $C$ is the total differential capacitance (device parasitics + any explicit tuning capacitors). The coupling (ratio $I_1/I_{SS}$) primarily enforces the **quadrature** (I/Q) phase relationship without substantially shifting the frequency away from the LC resonance.",
        "format": "markdown",
        "sha256": "61bbcb1bf98d8b40f450f07a3753b49280458b0b590f660b008ffbd453e497b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the tank resonance, but gives an incorrect coupling-shift formula and concludes coupling causes essentially no frequency shift. It misses the required shift proportional to the coupling factor times ω₀/(2Q), and incorrectly predicts only an upward shift.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1587,
        "output_tokens": 2054,
        "total_tokens": 3641,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1569,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1587,
        "output_tokens": 2054,
        "total_tokens": 3641,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1569,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    }
  ]
}
