{
  "model_key": "deepseek_v41_flash",
  "display_name": "DeepSeek V4.1 Flash 0910",
  "provider": "deepseek",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "DeepSeek V4.1 Flash 0910 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (deepseek/deepseek-v4.1-flash) at maximum reasoning effort. Requests set max_tokens to 943,718, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for DeepSeek V4.1 Flash 0910 on 2026-11-10 ($0.006 input, $0.005 cached input, $0.50 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 84,
          "incorrect_count": 66,
          "partial_credit_count": 47,
          "zero_count": 19,
          "mean_score_0_to_4": 2.7866666666666666,
          "score_percent": 69.66666666666667,
          "score_distribution": {
            "0": 19,
            "1": 22,
            "2": 15,
            "3": 10,
            "4": 84
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 84,
          "incorrect_count": 66,
          "partial_credit_count": 47,
          "zero_count": 19,
          "mean_score_0_to_4": 2.7866666666666666,
          "score_percent": 69.66666666666667,
          "score_distribution": {
            "0": 19,
            "1": 22,
            "2": 15,
            "3": 10,
            "4": 84
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 61,
          "incorrect_count": 29,
          "partial_credit_count": 13,
          "zero_count": 16,
          "mean_score_0_to_4": 2.977777777777778,
          "score_percent": 74.44444444444444,
          "score_distribution": {
            "0": 16,
            "1": 6,
            "2": 3,
            "3": 4,
            "4": 61
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 61,
          "incorrect_count": 29,
          "partial_credit_count": 13,
          "zero_count": 16,
          "mean_score_0_to_4": 2.977777777777778,
          "score_percent": 74.44444444444444,
          "score_distribution": {
            "0": 16,
            "1": 6,
            "2": 3,
            "3": 4,
            "4": 61
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 23,
          "incorrect_count": 37,
          "partial_credit_count": 34,
          "zero_count": 3,
          "mean_score_0_to_4": 2.5,
          "score_percent": 62.5,
          "score_distribution": {
            "0": 3,
            "1": 16,
            "2": 12,
            "3": 6,
            "4": 23
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 23,
          "incorrect_count": 37,
          "partial_credit_count": 34,
          "zero_count": 3,
          "mean_score_0_to_4": 2.5,
          "score_percent": 62.5,
          "score_distribution": {
            "0": 3,
            "1": 16,
            "2": 12,
            "3": 6,
            "4": 23
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 29,
        "incorrect_count": 21,
        "partial_credit_count": 13,
        "zero_count": 8,
        "mean_score_0_to_4": 2.74,
        "score_percent": 68.5,
        "score_distribution": {
          "0": 8,
          "1": 7,
          "2": 4,
          "3": 2,
          "4": 29
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 28,
        "incorrect_count": 22,
        "partial_credit_count": 16,
        "zero_count": 6,
        "mean_score_0_to_4": 2.84,
        "score_percent": 71.0,
        "score_distribution": {
          "0": 6,
          "1": 7,
          "2": 4,
          "3": 5,
          "4": 28
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 27,
        "incorrect_count": 23,
        "partial_credit_count": 18,
        "zero_count": 5,
        "mean_score_0_to_4": 2.78,
        "score_percent": 69.5,
        "score_distribution": {
          "0": 5,
          "1": 8,
          "2": 7,
          "3": 3,
          "4": 27
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 11136,
        "input_tokens": 114057,
        "output_tokens": 3713231,
        "total_tokens": 3827288
      },
      "known_totals": {
        "cached_input_tokens": 11136,
        "input_tokens": 114057,
        "output_tokens": 3713231,
        "total_tokens": 3827288
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 21,
          "incorrect_count": 9,
          "partial_credit_count": 3,
          "zero_count": 6,
          "mean_score_0_to_4": 2.933333333333333,
          "score_percent": 73.33333333333333,
          "score_distribution": {
            "0": 6,
            "1": 2,
            "2": 1,
            "4": 21
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 20,
          "incorrect_count": 10,
          "partial_credit_count": 5,
          "zero_count": 5,
          "mean_score_0_to_4": 3.0,
          "score_percent": 75.0,
          "score_distribution": {
            "0": 5,
            "1": 2,
            "2": 1,
            "3": 2,
            "4": 20
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 20,
          "incorrect_count": 10,
          "partial_credit_count": 5,
          "zero_count": 5,
          "mean_score_0_to_4": 3.0,
          "score_percent": 75.0,
          "score_distribution": {
            "0": 5,
            "1": 2,
            "2": 1,
            "3": 2,
            "4": 20
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 10,
          "zero_count": 2,
          "mean_score_0_to_4": 2.45,
          "score_percent": 61.25000000000001,
          "score_distribution": {
            "0": 2,
            "1": 5,
            "2": 3,
            "3": 2,
            "4": 8
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 11,
          "zero_count": 1,
          "mean_score_0_to_4": 2.6,
          "score_percent": 65.0,
          "score_distribution": {
            "0": 1,
            "1": 5,
            "2": 3,
            "3": 3,
            "4": 8
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 7,
          "incorrect_count": 13,
          "partial_credit_count": 13,
          "zero_count": 0,
          "mean_score_0_to_4": 2.45,
          "score_percent": 61.25000000000001,
          "score_distribution": {
            "1": 6,
            "2": 6,
            "3": 1,
            "4": 7
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the same bias/overdrive and long-channel behavior:\n\n\\[\nA_{\\text{int}} = g_m r_o\n\\]\n\nDoubling both \\(W\\) and \\(L\\) keeps \\(W/L\\) unchanged, so \\(g_m\\) is essentially unchanged at the same current/overdrive. However, \\(r_o\\) increases roughly in proportion to \\(L\\), since\n\n\\[\nr_o \\propto \\frac{L}{I_D}\n\\]\n\nSo doubling \\(L\\) approximately doubles \\(r_o\\). Therefore,\n\n\\[\nA_{\\text{int}} = g_m r_o \\approx \\text{doubles}\n\\]\n\nSo the intrinsic gain increases by about a factor of 2, i.e. about \\(+6\\text{ dB}\\).\n\nNote: in simplified models that treat \\(\\lambda\\) as independent of \\(L\\), the gain may appear unchanged, but physically/for long-channel MOS, increasing \\(L\\) increases intrinsic gain. In short-channel devices, the increase is usually less than the ideal factor of 2.",
        "format": "markdown",
        "sha256": "e17152a0d0d061d7f3ca9d74a0d1bea2d58effaf277fbdb4071ca3af27666d8a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that doubling both W and L leaves W/L and gm approximately unchanged at fixed overdrive, while ro roughly doubles as L increases, so intrinsic gain approximately doubles. The stated assumptions and caveats are appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48,
        "output_tokens": 4907,
        "total_tokens": 4955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4700,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48,
        "output_tokens": 4907,
        "total_tokens": 4955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4700,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the bias current/overdrive is held constant:\n\n\\[\nA_{\\text{int}} = \\frac{g_m}{g_{ds}} = g_m r_o\n\\]\n\nDoubling both \\(W\\) and \\(L\\) keeps \\(W/L\\) unchanged, so for the same bias current/overdrive \\(g_m\\) is essentially unchanged.\n\nBut in long-channel MOS,\n\n\\[\nr_o \\propto L\n\\]\n\nso doubling \\(L\\) roughly doubles \\(r_o\\). Therefore,\n\n\\[\nA_{\\text{int}} \\approx 2 \\times \\text{original intrinsic gain}\n\\]\n\nSo the intrinsic gain roughly doubles.\n\nIn short-channel devices, channel-length modulation/DIBL effects mean \\(r_o\\) does not scale exactly as \\(L\\), so the gain increases by less than \\(2\\times\\), depending on the process and bias.",
        "format": "markdown",
        "sha256": "62df250df3dc2e5b31dd6d4880901f65f7913a565601c7ff483e1cdb96306c7b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions leaves W/L, gm, and approximately the drain current unchanged at fixed overdrive, while the increased length raises ro and roughly doubles intrinsic gain. The short-channel caveat is reasonable.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48,
        "output_tokens": 3780,
        "total_tokens": 3828,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48,
        "output_tokens": 3780,
        "total_tokens": 3828,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the MOSFET is biased in saturation at the **same drain current/overdrive** and using the simple long-channel model:\n\n\\[\nA_{\\text{int}} = g_m r_o = \\frac{g_m}{g_{ds}}\n\\]\n\n- Doubling both \\(W\\) and \\(L\\) keeps \\(W/L\\) unchanged, so \\(g_m\\) is approximately unchanged.\n- Output resistance scales roughly as  \n  \\[\n  r_o \\propto \\frac{L}{I_D}\n  \\]\n  so doubling \\(L\\) approximately doubles \\(r_o\\).\n\nTherefore,\n\n\\[\nA_{\\text{int}} \\approx \\text{unchanged } g_m \\times \\text{doubled } r_o\n\\]\n\nSo the intrinsic gain **approximately doubles**.\n\nIn short-channel devices, the exact increase may be less than 2× and is technology-dependent due to DIBL, velocity saturation, etc.",
        "format": "markdown",
        "sha256": "513d81bdb85386a8d5f52fdfe8d92133faa3e8a0593151f0469596b36457b977"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions preserves W/L and approximately preserves gm and drain current, while the longer channel approximately doubles ro, so intrinsic gain approximately doubles. The short-channel caveat is appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48,
        "output_tokens": 3659,
        "total_tokens": 3707,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3474,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48,
        "output_tokens": 3659,
        "total_tokens": 3707,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3474,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct, depending on what is held constant.\n\nIn the standard long-channel saturation model,\n\n\\[\nI_D=\\frac12 \\mu C_{ox}\\frac{W}{L}V_{ov}^2\n\\]\n\nand therefore\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\n= \\mu C_{ox}\\frac{W}{L}V_{ov}\n= \\frac{2I_D}{V_{ov}}.\n\\]\n\nSo:\n\n- If \\(V_{ov}\\) is increased by increasing \\(V_{GS}\\) on the same device, then \\(g_m\\) increases. **Student A is correct** under the usual textbook assumption.\n- If the drain current \\(I_D\\) is held constant, then increasing \\(V_{ov}\\) makes \\(g_m=2I_D/V_{ov}\\) decrease. **Student B is correct** in that fixed-current sense.\n\nFor real short-channel devices, high-field effects such as mobility degradation and velocity saturation can also make \\(g_m\\) saturate or eventually fall at large \\(V_{ov}\\).\n\nSo the clean answer: **Student A is correct for a fixed device with increasing \\(V_{GS}\\); Student B is correct only if \\(I_D\\) is held constant or in some high-field regimes.**",
        "format": "markdown",
        "sha256": "c64ebe045d1cffcee8c141940a9dc241148ae4b3c4e82346abe39ec2068cc8a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device, derives the long-channel result, and explains that Student B applies when current is held fixed. The short-channel caveat does not undermine the essential answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 60,
        "output_tokens": 3377,
        "total_tokens": 3437,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 60,
        "output_tokens": 3377,
        "total_tokens": 3437,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming a MOSFET in strong inversion and saturation, **Student A is correct** for a fixed device:\n\n\\[\nV_{OV}=V_{GS}-V_{TH}\n\\]\n\n\\[\nI_D \\approx \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}V_{OV}^2\n\\]\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\n= \\mu C_{ox}\\frac{W}{L}V_{OV}\n\\]\n\nSo \\(g_m\\) **increases** as the overdrive voltage increases.\n\nCaveat: If the drain current is held constant, then\n\n\\[\ng_m=\\frac{2I_D}{V_{OV}}\n\\]\n\nso increasing \\(V_{OV}\\) makes \\(g_m\\) **decrease**. In that context, Student B would be correct.\n\nSo: **A is correct in the usual saturation/device sense; B is correct only when comparing at fixed drain current.**",
        "format": "markdown",
        "sha256": "b32ff3f7487fd56a9635ad3586f9fb2f0cfd7a9fd00107a6e4ca38365fe907a3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A for a fixed device size and explains that gm increases linearly with overdrive in saturation. It also correctly notes that Student B applies when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 60,
        "output_tokens": 2667,
        "total_tokens": 2727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2470,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 60,
        "output_tokens": 2667,
        "total_tokens": 2727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2470,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Student **A is correct** in the usual long-channel MOSFET saturation model.\n\nWith overdrive voltage  \n\\[\nV_{OV}=V_{GS}-V_{TH},\n\\]\nthe saturation drain current is\n\\[\nI_D=\\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}V_{OV}^2\n\\]\nso the transconductance is\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\n=\\mu_n C_{ox}\\frac{W}{L}V_{OV}.\n\\]\nThus, as \\(V_{OV}\\) increases, \\(g_m\\) **increases**.\n\nCaveat: Student B could be correct if the drain current is held constant, because\n\\[\ng_m=\\frac{2I_D}{V_{OV}},\n\\]\nso at fixed \\(I_D\\), larger \\(V_{OV}\\) gives smaller \\(g_m\\). Also, in short-channel devices with velocity saturation or mobility degradation, \\(g_m\\) may level off or decrease at high overdrive.\n\nSo, under standard assumptions: **Student A is correct.**",
        "format": "markdown",
        "sha256": "aaad68f044a790fc793be5f15627b08a519e0a0cc051327d502d088ecfcbb178"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives that for fixed W/L in long-channel saturation, gm increases with overdrive, and accurately notes that gm decreases with overdrive only if ID is held fixed. The added short-channel caveat does not undermine the answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 60,
        "output_tokens": 1476,
        "total_tokens": 1536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1249,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 60,
        "output_tokens": 1476,
        "total_tokens": 1536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1249,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Basically **yes in form, but not literally identical unless you reverse the voltage/current reference directions for the PMOS**.\n\nIn low-frequency saturation small-signal analysis, both devices reduce to:\n\n- open gate,\n- a voltage-controlled current source \\(g_m v_{gs}\\) or \\(g_m v_{sg}\\),\n- output resistance \\(r_o\\) between drain and source.\n\nFor an NMOS, the controlled source is usually drawn as \\(g_m v_{gs}\\) from **drain to source**, where  \n\\[\nv_{gs}=V_G-V_S .\n\\]\n\nFor a PMOS, normal conduction is from **source to drain**, so the model is usually drawn as \\(g_m v_{sg}\\) from **source to drain**, where  \n\\[\nv_{sg}=V_S-V_G .\n\\]\n\nIf you define the voltages and currents consistently for both devices, e.g. \\(v_{gs}=V_G-V_S\\), \\(v_{ds}=V_D-V_S\\), and \\(i_d\\) entering the drain, then the small-signal equation has the same form:\n\\[\ni_d = g_m v_{gs} + g_o v_{ds}.\n\\]\n\nSo: **the small-signal model topology is the same, but the PMOS model has reversed polarity/reference directions. The numerical parameters also differ**—for example, \\(g_m\\) is typically smaller for PMOS because hole mobility is lower than electron mobility.",
        "format": "markdown",
        "sha256": "f1394cf8441cc3ff67d7b256fc35c0d441ff6d1d8c1da58d76b1cde20e2507d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model is the same in form, with polarity/reference conventions reversed; this earns full credit under the golden solution's rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 50,
        "output_tokens": 12734,
        "total_tokens": 12784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12440,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 50,
        "output_tokens": 12734,
        "total_tokens": 12784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12440,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not literally “identical,” but the small-signal equivalent circuit has the same topology and the same form once you account for polarity.\n\nFor an NMOS, using \\(v_{gs}=v_g-v_s\\), \\(v_{ds}=v_d-v_s\\), and drain current entering the drain:\n\n\\[\ni_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}\n\\]\n\nThe controlled source \\(g_m v_{gs}\\) is drawn from drain to source.\n\nFor a PMOS, in its normal current direction, source to drain:\n\n\\[\ni_{sd} = g_m v_{sg} + \\frac{v_{sd}}{r_o}\n\\]\n\nwith \\(v_{sg}=v_s-v_g\\), \\(v_{sd}=v_s-v_d\\). Equivalently, if you define \\(i_d\\) as current entering the drain and use \\(v_{gs},v_{ds}\\) for the PMOS, the equation can be written in the same form as for the NMOS:\n\n\\[\ni_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}\n\\]\n\nSo:\n\n- Same small-signal model topology: \\(g_m\\), \\(r_o\\), capacitances, etc.\n- PMOS polarity/current direction is reversed relative to NMOS.\n- DC bias conditions are opposite: NMOS needs \\(V_{GS}>V_{TH}\\), \\(V_{DS}>0\\); PMOS needs \\(V_{SG}>|V_{TH}|\\), \\(V_{SD}>0\\).\n\nThus, the PMOS small-signal model is identical to the NMOS model only up to sign conventions and source/drain orientation.",
        "format": "markdown",
        "sha256": "0072c79d547e1969b0f53bda1eb19e0b1e710beda5a1babc767bb59da14697fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form and topology as the NMOS model, with polarity and sign conventions adjusted.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 50,
        "output_tokens": 9114,
        "total_tokens": 9164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7787,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 50,
        "output_tokens": 9114,
        "total_tokens": 9164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7787,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not literally—but the topology is essentially the same.\n\nBoth NMOS and PMOS small-signal models contain the same elements:  \n\\(g_m v_{gs}\\), \\(g_{mb}v_{bs}\\), \\(r_o\\), and the parasitic capacitances \\(C_{gs}, C_{gd}, C_{db}, C_{sb}\\).\n\nThe difference is in **polarity/reference direction**:\n\n- NMOS normally has \\(V_{GS}>0\\), \\(V_{DS}>0\\), and current flows drain-to-source.\n- PMOS normally has \\(V_{GS}<0\\), \\(V_{DS}<0\\), and current flows source-to-drain.\n\nSo if you draw the PMOS model in its natural orientation, the controlled current source direction is reversed, or it is written as  \n\\[\ng_m v_{sg} = -g_m v_{gs}.\n\\]\n\nHowever, if you use the same reference directions for both devices—define \\(v_{gs}=v_G-v_S\\), \\(v_{ds}=v_D-v_S\\), and take \\(i_d\\) as drain-to-source current—then the small-signal equation has the same form:\n\\[\ni_d = g_m v_{gs} + g_{mb}v_{bs} + \\frac{v_{ds}}{r_o}.\n\\]\n\nSo: **same small-signal model topology, but with opposite voltage/current polarity conventions. It is mathematically identical only after accounting for the PMOS sign conventions.**",
        "format": "markdown",
        "sha256": "bfa419deae870cebba18b9c125bac379f95bc0f3c8d6d760ce64494960d213fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly states that the PMOS model has the same form as the NMOS model when polarity conventions are handled consistently, satisfying the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 50,
        "output_tokens": 10135,
        "total_tokens": 10185,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9265,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 50,
        "output_tokens": 10135,
        "total_tokens": 10185,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9265,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the diode-connected NMOS \\(M_1\\), the gate and drain are tied together, so  \n\\[\nV_{GS}=V_{DS}=V_X.\n\\]\n\n- For \\(V_X < V_{tn}\\): \\(M_1\\) is cut off, so  \n  \\[\n  I_X = 0.\n  \\]\n- For \\(V_X \\ge V_{tn}\\): \\(M_1\\) is in saturation because \\(V_{DS}=V_{GS} > V_{GS}-V_{tn}\\). Thus  \n  \\[\n  I_X = \\frac12 \\mu_n C_{ox}\\left(\\frac WL\\right)(V_X-V_{tn})^2\n  \\]\n  (neglecting channel-length modulation).\n\nSketch:\n\n\\[\n\\begin{array}{c}\nI_X \\\\\n\\uparrow \\\\\n| \\\\\n| \\hspace{1.2cm} \\text{parabolic} \\\\\n| \\hspace{1.3cm} \\curvearrowup \\\\\n| \\hspace{1.5cm} \\\\\n| \\underline{\\hspace{2cm}} \\\\\n0 \\hspace{1cm} V_{tn} \\hspace{2cm} V_X\n\\end{array}\n\\]\n\nSo the plot starts at \\(V_X=V_{tn}\\) and increases quadratically for \\(V_X>V_{tn}\\), while it is zero for \\(V_X<V_{tn}\\).",
        "format": "markdown",
        "sha256": "8cd9cfeb1a207f3f8a0a9a9e2516eb46b0f710a640e8db2cbb35fc00e67a9fad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold, and a quadratic saturation-current rise above threshold.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 640,
        "output_tokens": 6201,
        "total_tokens": 6841,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5908,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 640,
        "output_tokens": 6201,
        "total_tokens": 6841,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5908,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an enhancement-mode NMOS and its body is tied to ground/source:\n\n- Gate is connected to drain, so  \n  \\[\n  V_{GS}=V_{DS}=V_X\n  \\]\n- For \\(V_X < V_T\\), \\(M_1\\) is cut off:\n  \\[\n  I_X=0\n  \\]\n- For \\(V_X \\ge V_T\\), \\(M_1\\) is in saturation because diode connection ensures \\(V_{DS}=V_{GS}>V_{GS}-V_T\\). Thus\n  \\[\n  I_X=\\frac12 k_n\\left(\\frac{W}{L}\\right)(V_X-V_T)^2\n  \\]\n  where \\(k_n=\\mu_n C_{ox}\\). If channel-length modulation is included, add a factor \\((1+\\lambda V_X)\\), giving a slight upward slope.\n\nSketch:\n\n```\nI_X\n |\n |                         *\n |                       *\n |                    *\n |                 *\n |             *\n |         *\n |     *\n |_*__________________________ V_X\n 0    V_T\n```\n\nSo the \\(I_X\\)–\\(V_X\\) curve is zero until the threshold voltage \\(V_T\\), then follows a square-law parabolic increase. If \\(V_X<0\\), ideally \\(I_X=0\\) as well.",
        "format": "markdown",
        "sha256": "8cb59ab8e9434fa19908de98350d4a61516cb74f0dca71526878e3e79a55b7df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS as off below threshold and in saturation above threshold, producing the required quadratic rise. The idealized negative-\u000bV_X\u000b note is secondary and does not affect the score.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 5871,
        "total_tokens": 6513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5594,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 5871,
        "total_tokens": 6513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5594,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the diode-connected NMOS \\(M_1\\),  \n\\[\nV_G=V_D=V_X,\\qquad V_S=0\n\\]\nso \\(V_{GS}=V_X\\) and \\(V_{DS}=V_X\\). Once \\(V_X>V_{TN}\\), the NMOS is in saturation.\n\nAt the top node, KCL with the indicated \\(I_X\\) arrow gives\n\\[\nI_X+I_D=0 \\quad\\Rightarrow\\quad I_X=-I_D.\n\\]\n\nFor an NMOS in saturation,\n\\[\nI_D=\\frac12 k_n'\\frac{W}{L}(V_X-V_{TN})^2\n\\]\n(ignoring channel-length modulation). Therefore\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0, & V_X<V_{TN}\\\\[6pt]\n-\\dfrac12 k_n'\\dfrac{W}{L}(V_X-V_{TN})^2, & V_X\\ge V_{TN}\n\\end{cases}}\n\\]\n\nSo the sketch is:\n\n- \\(I_X=0\\) for \\(V_X<V_{TN}\\)\n- At \\(V_X=V_{TN}\\), it begins to conduct\n- For \\(V_X>V_{TN}\\), \\(I_X\\) follows a downward-opening square-law curve (negative if \\(I_X\\) is taken in the arrow direction shown).\n\nIf the current convention is taken as the current supplied by \\(V_X\\) into the diode-connected NMOS, then the sign flips, giving a positive square-law curve:\n\\[\nI_{\\text{supply}}=\\frac12 k_n'\\frac{W}{L}(V_X-V_{TN})^2.\n\\]\n\nThus the expected characteristic is a threshold-then-square-law curve, similar to a diode I-V characteristic but with a sharp cut-in at \\(V_{TN}\\).",
        "format": "markdown",
        "sha256": "cc0e28e3bcf74496b69a92c56e0035f14113c36180dca7e1f34cb5f0356006d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the diode-connected NMOS, cutoff below threshold, saturation above it, and the square-law current. However, it gives the plotted IX a negative, downward trend, whereas the golden answer specifies IX rising quadratically; the positive curve is presented only as an alternate current convention.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 640,
        "output_tokens": 9786,
        "total_tokens": 10426,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 640,
        "output_tokens": 9786,
        "total_tokens": 10426,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming M1 is an n-channel enhancement MOSFET, source grounded, drain at \\(1\\text{ V}\\), and gate voltage \\(V_X\\):\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\text{ V}\n\\]\n\nLet  \n\\[\nV_{TH}=\\text{threshold voltage},\\qquad k_n=\\mu_n C_{ox}\\frac{W}{L}\n\\]\n\nThen:\n\n1. **Cutoff** \\((V_X<V_{TH})\\)  \n   \\[\n   I_X=0\n   \\]\n\n2. **Saturation** \\((V_{TH}\\le V_X\\le V_{TH}+1)\\)  \n   Since \\(V_{DS}=1\\text{ V}\\ge V_{GS}-V_{TH}\\),\n   \\[\n   I_X=\\frac12 k_n(V_X-V_{TH})^2\n   \\]\n\n3. **Triode/linear** \\((V_X>V_{TH}+1)\\)  \n   Since \\(V_{DS}<V_{GS}-V_{TH}\\),\n   \\[\n   I_X=k_n\\left[(V_X-V_{TH})(1)-\\frac12(1)^2\\right]\n   =k_n\\left(V_X-V_{TH}-\\frac12\\right)\n   \\]\n\nAt the boundary \\(V_X=V_{TH}+1\\), both expressions give \\(I_X=\\frac12 k_n\\), so the curve is continuous.\n\nSketch:\n\n```\nIX\n |\n |                     /   ← linear: slope kn\n |                   /\n |                 .'\n |              .'\n |          _.-'            ← saturation: parabola\n |_________/___________________→ VX\n         VTH   VTH+1\n```\n\nThus, \\(I_X\\) is zero below \\(V_{TH}\\), rises quadratically until \\(V_X=V_{TH}+1\\), and then increases linearly for larger \\(V_X\\).",
        "format": "markdown",
        "sha256": "643a3cf5f29e919caa5ae1a816540ea4289d4bff30c025152a6581e48551980e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions, with a quadratic rise up to VTH + 1 V and a linear rise beyond; the equations and boundary continuity are also correct.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 713,
        "output_tokens": 6620,
        "total_tokens": 7333,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6240,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 713,
        "output_tokens": 6620,
        "total_tokens": 7333,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6240,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an enhancement NMOS with threshold voltage \\(V_{TN}\\), \\(V_{GS}=V_X\\), and \\(V_{DS}=1\\text{ V}\\):\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X<V_{TN}\\\\[4pt]\n\\dfrac12 k_n(V_X-V_{TN})^2, & V_{TN}\\le V_X\\le V_{TN}+1\\\\[6pt]\nk_n\\left[(V_X-V_{TN})(1)-\\dfrac12(1)^2\\right], & V_X>V_{TN}+1\n\\end{cases}\n\\]\n\nwhere \\(k_n=\\mu_n C_{ox}W/L\\).\n\nSo the sketch is:\n\n- \\(V_X<V_{TN}\\): \\(I_X=0\\)\n- \\(V_{TN}<V_X<V_{TN}+1\\): quadratic increase (saturation region)\n- \\(V_X>V_{TN}+1\\): linear increase (triode region)\n\nAt \\(V_X=V_{TN}+1\\), the current is \\(\\frac12k_n\\) and the slope is \\(k_n\\) on both sides, so the curve joins smoothly.\n\n\\[\n\\begin{array}{c}\nI_X \\\\[2pt]\n\\uparrow \\\\\n| \\quad \\text{linear (triode)} \\\\\n| \\quad \\diagup \\\\\n| \\quad \\diagup \\\\\n| \\ \\text{saturation} \\\\\n| \\ \\diagup\\diagup \\\\\n| \\diagup \\quad \\diagup \\\\\n|\\underline{\\hspace{1cm}}\\underline{\\hspace{1cm}}\\rightarrow V_X \\\\\n0 \\quad V_{TN} \\quad V_{TN}+1\n\\end{array}\n\\]\n\nThus, \\(I_X\\) is zero until \\(V_{TN}\\), then rises quadratically until \\(V_{TN}+1\\), then rises linearly.",
        "format": "markdown",
        "sha256": "11477bd1e2ee1588d40e5c7ff2f62d3a677a9e7ed80b3ffa6d5c5da23ec9dc12"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the off, saturation, and triode regions, gives the matching current expressions, and describes the quadratic-to-linear transition at V_X = V_TN + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 711,
        "output_tokens": 9106,
        "total_tokens": 9817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 711,
        "output_tokens": 9106,
        "total_tokens": 9817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an NMOS with threshold voltage \\(V_{TH}\\) and transconductance parameter  \n\\[\nk=\\mu_n C_{ox}\\frac{W}{L},\n\\]\nthe drain–source voltage is fixed at\n\\[\nV_{DS}=1\\text{ V}\n\\]\nbecause the drain is connected to the 1 V source and the source is grounded.\n\nThe regions are:\n\n1. **Cutoff:**  \n   For \\(V_X < V_{TH}\\),\n   \\[\n   I_X = 0\n   \\]\n\n2. **Saturation:**  \n   For \\(V_{TH} < V_X < V_{TH}+1\\text{ V}\\),  \n   \\[\n   V_{DS}=1\\text{ V} > V_{GS}-V_{TH}=V_X-V_{TH}\n   \\]\n   so\n   \\[\n   I_X=\\frac12 k(V_X-V_{TH})^2\n   \\]\n\n3. **Triode:**  \n   For \\(V_X > V_{TH}+1\\text{ V}\\),\n   \\[\n   V_{DS}<V_{GS}-V_{TH}\n   \\]\n   and\n   \\[\n   I_X=k\\left[(V_X-V_{TH})(1)-\\frac12(1)^2\\right]\n   =k\\left(V_X-V_{TH}-0.5\\right)\n   \\]\n\nAt the boundary \\(V_X=V_{TH}+1\\text{ V}\\),\n\\[\nI_X=\\frac12 k(1)^2=0.5k\n\\]\nso the curve is continuous.\n\n\\[\n\\boxed{\n\\begin{aligned}\nI_X&=0, & &V_X<V_{TH}\\\\[4pt]\nI_X&=\\frac12 k(V_X-V_{TH})^2, & &V_{TH}<V_X<V_{TH}+1\\text{ V}\\\\[4pt]\nI_X&=k(V_X-V_{TH}-0.5), & &V_X>V_{TH}+1\\text{ V}\n\\end{aligned}\n}\n\\]\n\n**Sketch description:**  \n- Horizontal line at \\(I_X=0\\) for \\(V_X<V_{TH}\\).  \n- Parabolic increase starting at \\(V_X=V_{TH}\\).  \n- At \\(V_X=V_{TH}+1\\text{ V}\\), the curve reaches \\(I_X=0.5k\\).  \n- After that, it becomes a straight line with slope \\(k\\), continuing upward as \\(V_X\\) increases.",
        "format": "markdown",
        "sha256": "90597e3bc3080f0f1f59f697098a66802da973c58a56fedbbedb5d42d8dc9d58"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions, with a quadratic rise from threshold followed by a continuous, roughly linear rise beyond VTH + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 640,
        "input_tokens": 713,
        "output_tokens": 19601,
        "total_tokens": 20314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19085,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 640,
        "input_tokens": 713,
        "output_tokens": 19601,
        "total_tokens": 20314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19085,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**if M1 is a depletion-mode MOSFET (or JFET)**.\n\nHere the gate and source are both grounded, so \\(V_{GS}=0\\). For a depletion-type device, a channel already exists at \\(V_{GS}=0\\); when operated in saturation (\\(V_{DS}\\) sufficiently large), the drain current becomes approximately constant at \\(I_{DSS}\\). Thus the device can act as a **constant-current source/current sink**.\n\nHowever, if M1 were an **enhancement-mode MOSFET**, \\(V_{GS}=0\\) would be below its threshold voltage, so it would be off and could **not** act as a current source.",
        "format": "markdown",
        "sha256": "2b3583b11d76a56eb4d321e96ee51c6aa1b21fa7b29a8a7030fd9923cf105034"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the figure: M1 is a diode-connected PMOS, with its source at the top and gate and drain grounded. It instead assumes a depletion device with gate and source grounded and concludes it can act as a current source, contrary to the low-impedance behavior of the actual circuit.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 305,
        "output_tokens": 7321,
        "total_tokens": 7626,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 305,
        "output_tokens": 7321,
        "total_tokens": 7626,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—provided the device is a **depletion-mode MOSFET** and it is operated in saturation.\n\nWith the gate and source both grounded, \\(V_{GS}=0\\).  \n- If it were an **enhancement-mode** MOSFET, it would be off, so it could not act as a current source.  \n- If it is a **depletion-mode** MOSFET (as the symbol suggests), it conducts at \\(V_{GS}=0\\). For sufficiently large \\(V_{DS}\\) (i.e., \\(V_{DS}\\ge |V_t|\\)), it operates in saturation and its drain current is approximately constant, so it behaves as a current source.\n\nThus, the device can act as a current source if it is a depletion-type MOSFET biased in saturation.",
        "format": "markdown",
        "sha256": "2921c496b30ad2d6a617d97abf9e6d1864852828343d9ff6bb1db327c9d6a065"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It concludes the drawn device can act as a current source, but M1 is a diode-connected PMOS with gate and drain grounded, presenting low impedance (about 1/gm), not a depletion MOSFET with gate and source grounded.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 305,
        "output_tokens": 11137,
        "total_tokens": 11442,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10982,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 305,
        "output_tokens": 11137,
        "total_tokens": 11442,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10982,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—assuming M1 is a **depletion-mode MOSFET** (which the symbol suggests, since the channel is drawn as a continuous line).\n\nWith the gate and source both grounded,  \n\\[\nV_{GS}=0\n\\]\nA depletion-mode MOSFET already has a conducting channel at \\(V_{GS}=0\\). As long as the drain voltage is high enough to keep it in saturation, its drain current is approximately constant at \\(I_{DSS}\\). Therefore, the device can act as a **two-terminal current source/current sink** between the drain and ground.\n\nIf it were an enhancement-mode MOSFET, \\(V_{GS}=0\\) would be below threshold and it would be off, so it could not act as a current source.",
        "format": "markdown",
        "sha256": "e8dc4eca54f49054ff4cca09acb3564946b5f6ce949f19abe4bd2bfb62a4a5d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the topology and device: M1 is a diode-connected PMOS with its gate and drain grounded, not a depletion-mode MOSFET with gate and source grounded. It presents a low impedance (about 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 305,
        "output_tokens": 8767,
        "total_tokens": 9072,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 305,
        "output_tokens": 8767,
        "total_tokens": 9072,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the standard MOSFET symbol convention, the arrow on the top terminal indicates the source, so **M₁ is a PMOS transistor**. The circuit is a **PMOS common-source amplifier with source degeneration**:\n\n- Input: gate (\\(V_{\\mathrm{in}}\\))\n- Output: drain (\\(V_{\\mathrm{out}}\\))\n- \\(R_S\\): source degeneration resistor\n- \\(R_D\\): drain load resistor\n\n---\n\n## 1. DC bias\n\nLet \\(I_D>0\\) be the source-to-drain DC current, \\(K_p=\\mu_p C_{ox}(W/L)\\), and \\(|V_{TH}|\\) be the PMOS threshold magnitude.\n\nSource voltage:\n\\[\nV_S=V_{DD}-I_D R_S\n\\]\n\nDrain/output DC voltage:\n\\[\nV_{\\mathrm{OUT}}=V_D=I_D R_D\n\\]\n\nGate voltage:\n\\[\nV_G=V_{\\mathrm{in}}\n\\]\n\nSource-gate voltage:\n\\[\nV_{SG}=V_S-V_G\n      =V_{DD}-I_D R_S-V_{\\mathrm{in}}\n\\]\n\nIn saturation:\n\\[\nI_D=\\frac12 K_p\\left(V_{SG}-|V_{TH}|\\right)^2\n\\]\n\n\\[\n\\boxed{\nI_D=\\frac12 K_p\n\\left(V_{DD}-V_{\\mathrm{in}}-|V_{TH}|-I_D R_S\\right)^2\n}\n\\]\n\nThe saturation conditions are:\n\\[\nV_{SG}\\ge |V_{TH}|,\\qquad\nV_{SD}=V_{DD}-I_D(R_S+R_D)\\ge V_{SG}-|V_{TH}|\n\\]\n\nIf the second condition is not satisfied, M₁ operates in triode.\n\n---\n\n## 2. Small-signal analysis\n\nSmall-signal parameters:\n\\[\ng_m=K_p\\left(V_{SG}-|V_{TH}|\\right)=\\sqrt{2K_pI_D}\n\\]\n\\[\nr_o=\\frac{1}{\\lambda I_D}\n\\]\nwhere \\(r_o\\to\\infty\\) if channel-length modulation is neglected.\n\nFor the PMOS small-signal model:\n\\[\ni_d=g_m(v_s-v_g)+\\frac{v_s-v_d}{r_o}\n\\]\nwhere \\(v_g=v_{\\mathrm{in}}\\), \\(v_s\\) is the source small-signal voltage, and \\(v_d=v_{\\mathrm{out}}\\).\n\nKCL at source:\n\\[\ni_d+\\frac{v_s}{R_S}=0\n\\quad\\Rightarrow\\quad\ni_d=-\\frac{v_s}{R_S}\n\\]\n\nKCL at drain:\n\\[\n\\frac{v_d}{R_D}-i_d=0\n\\quad\\Rightarrow\\quad\ni_d=\\frac{v_d}{R_D}\n\\]\n\nThus:\n\\[\nv_s=-\\frac{R_S}{R_D}v_d\n\\]\n\nSubstituting into the transistor equation gives the small-signal voltage gain:\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=\n-\\frac{g_mR_D}\n{1+g_mR_S+\\dfrac{R_S+R_D}{r_o}}\n}\n\\]\n\nIf \\(r_o\\to\\infty\\), this simplifies to the familiar source-degenerated common-source gain:\n\\[\n\\boxed{\nA_v\\approx -\\frac{g_mR_D}{1+g_mR_S}\n}\n\\]\n\n---\n\n## 3. Input and output resistance\n\nInput resistance:\n\\[\n\\boxed{R_{\\mathrm{in}}\\approx \\infty}\n\\]\nsince the MOSFET gate draws no DC/low-frequency current.\n\nOutput resistance:\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=\nR_D\\parallel\\left[R_S+r_o\\left(1+g_mR_S\\right)\\right]\n}\n\\]\n\nIf \\(r_o\\to\\infty\\), the resistance looking into the transistor drain is very large, so:\n\\[\nR_{\\mathrm{out}}\\approx R_D\n\\]\n\n---\n\n## Summary\n\n- Topology: **PMOS common-source amplifier with source degeneration**.\n- \\(R_S\\) provides negative feedback, improving bias stability and linearity but reducing gain.\n- Output is inverted relative to the input.\n- Voltage gain:  \n  \\[\n  A_v=-\\frac{g_mR_D}{1+g_mR_S+(R_S+R_D)/r_o}\n  \\]\n- Input resistance is ideally infinite.\n- Output resistance is approximately \\(R_D\\) in parallel with the resistance looking into the drain.",
        "format": "markdown",
        "sha256": "447eb7cd4843b676caa9dc3fed7b2483bd91454152eaff05625ce6340956587d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as a PMOS common-source stage with source degeneration and gives the inverting gain, including a valid refinement for finite output resistance.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 736,
        "output_tokens": 18932,
        "total_tokens": 19668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18025,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 736,
        "output_tokens": 18932,
        "total_tokens": 19668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18025,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The arrow on \\(M_1\\) points toward the gate, so \\(M_1\\) is a **p-channel MOSFET (PMOS)**.  \nThe circuit is a **PMOS common-source amplifier with source degeneration**:\n- Input: gate (\\(V_{\\text{in}}\\))\n- Output: drain (\\(V_{\\text{out}}\\))\n- \\(R_S\\): source resistor\n- \\(R_D\\): drain resistor\n- \\(V_{DD}\\): positive supply\n\n---\n\n## 1. DC bias analysis\n\nAssume \\(M_1\\) operates in saturation.\n\nLet the DC gate voltage be \\(V_G = V_{\\text{in,DC}}\\) and drain current be \\(I_D\\).\n\nThen:\n\\[\nV_S = V_{DD} - I_D R_S\n\\]\n\\[\nV_D = I_D R_D\n\\]\n\\[\nV_{SG}=V_S-V_G=V_{DD}-I_D R_S-V_{\\text{in,DC}}\n\\]\n\nFor a PMOS in saturation:\n\\[\nI_D=\\frac12 K_p\\left(V_{SG}-|V_{tp}|\\right)^2\n\\]\nwhere\n\\[\nK_p=\\mu_p C_{ox}\\frac{W}{L}\n\\]\nand \\(|V_{tp}|\\) is the magnitude of the PMOS threshold voltage.\n\nSaturation conditions:\n\\[\nV_{SG}\\ge |V_{tp}|\n\\]\n\\[\nV_{SD}=V_S-V_D \\ge V_{SG}-|V_{tp}|\n\\]\nEquivalently:\n\\[\nV_{DD}-I_D R_S-V_{\\text{in,DC}}\\ge |V_{tp}|\n\\]\n\\[\nI_D R_D \\le V_{\\text{in,DC}}+|V_{tp}|\n\\]\n\nSolve\n\\[\nI_D=\\frac12 K_p\\left(V_{DD}-I_D R_S-V_{\\text{in,DC}}-|V_{tp}|\\right)^2\n\\]\nfor \\(I_D\\), choosing the physically valid root. Then:\n\\[\nV_{\\text{out,DC}}=V_D=I_D R_D\n\\]\n\n---\n\n## 2. Small-signal analysis\n\nLet\n\\[\ng_m=\\sqrt{2K_p I_D}=\\frac{2I_D}{V_{SG}-|V_{tp}|}\n\\]\nand, if channel-length modulation is included,\n\\[\nr_o=\\frac{1}{\\lambda I_D}\n\\]\n\nFor the small-signal model, let \\(v_{\\text{in}}\\), \\(v_s\\), and \\(v_{\\text{out}}\\) be the AC gate, source, and drain voltages.\n\nThe voltage gain is\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n-\\frac{g_m R_D}{1+g_m R_S+\\frac{R_S+R_D}{r_o}}\n}\n\\]\n\nIf channel-length modulation is neglected, \\(r_o\\to\\infty\\), and\n\\[\n\\boxed{\nA_v \\approx -\\frac{g_m R_D}{1+g_m R_S}\n}\n\\]\n\nThe negative sign indicates that the amplifier is **inverting**.\n\n---\n\n## 3. Input and output resistance\n\n- Input resistance:\n\\[\nR_{\\text{in}}\\approx \\infty\n\\]\nbecause the gate is insulated.\n\n- Output resistance:\n\\[\n\\boxed{\nR_{\\text{out}}\n=\nR_D \\parallel \\left[r_o(1+g_m R_S)+R_S\\right]\n}\n\\]\n\nIf \\(r_o\\to\\infty\\),\n\\[\nR_{\\text{out}}\\approx R_D\n\\]\n\n---\n\n## 4. Role of \\(R_S\\)\n\n\\(R_S\\) provides **source degeneration**, which:\n- reduces the voltage gain,\n- improves linearity,\n- stabilizes the DC bias point,\n- increases the output resistance.\n\nSo the circuit is a **PMOS common-source amplifier with source degeneration**, and its small-signal gain is approximately  \n\\[\n\\boxed{A_v \\approx -\\frac{g_mR_D}{1+g_mR_S}}\n\\]\nwhen \\(r_o\\) is neglected.",
        "format": "markdown",
        "sha256": "a47825e4f9e97901ee70356fe4ca1333146c1f8be7a365bc42d2059e1ea0ff0c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain -gm RD/(1 + gm RS). The added finite-ro and bias analyses do not undermine the essential answer.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 734,
        "output_tokens": 18403,
        "total_tokens": 19137,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 734,
        "output_tokens": 18403,
        "total_tokens": 19137,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **single-stage PMOS common-source amplifier with source degeneration**.  \nThe PMOS \\(M_1\\) has its source at the top, drain at the bottom, gate driven by \\(V_{\\text{in}}\\), and output taken from the drain.\n\n---\n\n## 1. DC analysis\n\nLet  \n\\[\nK_p=\\mu_p C_{ox}\\frac{W}{L},\\qquad V_{TP}=\\text{magnitude of PMOS threshold voltage}\n\\]\n\nThe same DC current \\(I_D\\) flows through \\(R_S\\), \\(M_1\\), and \\(R_D\\):\n\\[\nI_D=\\frac12 K_p(V_{SG}-V_{TP})^2 \\quad \\text{(saturation)}\n\\]\n\nFrom KVL:\n\\[\nV_S=V_{DD}-I_D R_S\n\\]\n\\[\nV_{\\text{out}}=V_D=I_D R_D\n\\]\n\\[\nV_{SG}=V_S-V_{\\text{in}}=V_{DD}-I_D R_S-V_{\\text{in}}\n\\]\n\\[\nV_{SD}=V_S-V_D=V_{DD}-I_D(R_S+R_D)\n\\]\n\nThus the bias equation is\n\\[\n\\boxed{\nI_D=\\frac12 K_p\\left(V_{DD}-I_D R_S-V_{\\text{in}}-V_{TP}\\right)^2\n}\n\\]\nSolve this quadratic for \\(I_D\\). The PMOS is in saturation if\n\\[\nV_{SD}\\ge V_{SG}-V_{TP}\n\\]\nwhich simplifies to\n\\[\n\\boxed{\nV_{\\text{out}}\\le V_{\\text{in}}+V_{TP}\n}\n\\]\n\n---\n\n## 2. Small-signal analysis\n\nNeglecting channel-length modulation first:\n\\[\ng_m=\\sqrt{2K_p I_D}=K_p(V_{SG}-V_{TP})\n\\]\n\nLet \\(v_i=v_{\\text{in}}\\), \\(v_o=v_{\\text{out}}\\), and \\(v_s\\) be the small-signal source voltage.\n\nAt the source node:\n\\[\n\\frac{v_s}{R_S}+g_m(v_s-v_i)=0\n\\]\n\\[\nv_s=\\frac{g_mR_S}{1+g_mR_S}v_i\n\\]\n\nThe small-signal drain current is\n\\[\ni_d=g_m(v_s-v_i)\n\\]\nand the output voltage is\n\\[\nv_o=i_dR_D\n\\]\nTherefore\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=-\\frac{g_mR_D}{1+g_mR_S}\n}\n\\]\n\nThe gain is negative, so the amplifier is **inverting**.  \nIf \\(R_S=0\\), this reduces to the familiar\n\\[\nA_v=-g_mR_D\n\\]\n\nInput resistance:\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty}\n\\]\n\nOutput resistance, neglecting \\(r_o\\):\n\\[\n\\boxed{R_{\\text{out}}\\approx R_D}\n\\]\n\nIf channel-length modulation \\(r_o\\) is included:\n\\[\n\\boxed{\nA_v=-\\frac{g_mR_D}{1+g_mR_S+\\frac{R_S+R_D}{r_o}}\n}\n\\]\nand\n\\[\n\\boxed{\nR_{\\text{out}}=R_D\\parallel\\left[r_o(1+g_mR_S)+R_S\\right]\n}\n\\]\n\n---\n\n## Summary\n\n- Device: **PMOS**, biased in saturation.\n- Configuration: **common-source with source degeneration**.\n- DC current is set by \\(V_{\\text{in}}\\), \\(R_S\\), \\(R_D\\), and \\(M_1\\)’s parameters.\n- Small-signal voltage gain:\n  \\[\n  \\boxed{A_v=-\\frac{g_mR_D}{1+g_mR_S}}\n  \\]\n- Source resistor \\(R_S\\) reduces gain but improves linearity and bias stability.\n- Input resistance is very high; output resistance is approximately \\(R_D\\).",
        "format": "markdown",
        "sha256": "e835d2e61fe5257f8e03b5126680af9bacfd18f7e94ebce92801566308835bc1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the correct inverting gain, \u0002−gmRD/(1+gmRS)\u0002. Additional analysis is consistent with the essential answer.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 734,
        "output_tokens": 18063,
        "total_tokens": 18797,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 734,
        "output_tokens": 18063,
        "total_tokens": 18797,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an NMOS enhancement MOSFET, the circuit is a **common-drain amplifier**, also called a **source follower**. The input is applied to the gate, the output is taken from the source, and \\(R_S\\) is the source bias/load resistor. \\(V_{DD}\\) is the drain supply.\n\n## 1. DC analysis\n\nIf the MOSFET is in saturation, its drain current is\n\n\\[\nI_D=\\frac12 \\beta (V_{GS}-V_{TH})^2\n\\]\n\nwhere \\(\\beta=\\mu_n C_{ox}\\dfrac{W}{L}\\) (often written as \\(k_n' W/L\\)).\n\nFrom the circuit:\n\n\\[\nV_{GS}=V_{in}-V_{out}\n\\]\n\nand\n\n\\[\nV_{out}=I_D R_S\n\\]\n\nTherefore,\n\n\\[\nI_D=\\frac12 \\beta (V_{in}-I_D R_S - V_{TH})^2\n\\]\n\nSolve this quadratic for \\(I_D\\), then\n\n\\[\nV_{out}=I_D R_S\n\\]\n\nThe transistor must remain in saturation:\n\n\\[\nV_{GS}>V_{TH}\n\\]\n\nand\n\n\\[\nV_{DS}=V_{DD}-V_{out} > V_{GS}-V_{TH}\n\\]\n\nso\n\n\\[\nV_{DD} > V_{in}-V_{TH}\n\\]\n\napproximately. If \\(V_{in}\\) is too low, \\(M_1\\) turns off and \\(V_{out}\\approx 0\\).\n\n## 2. Small-signal analysis\n\nThe small-signal parameters are\n\n\\[\ng_m=\\beta (V_{GS}-V_{TH})=\\sqrt{2\\beta I_D}\n\\]\n\nand, if channel-length modulation is included,\n\n\\[\nr_o=\\frac{1}{\\lambda I_D}\n\\]\n\n### Voltage gain\n\nA small-signal KCL at the source gives\n\n\\[\ng_m(v_{in}-v_{out})-\\frac{v_{out}}{r_o}=\\frac{v_{out}}{R_S}\n\\]\n\nThus\n\n\\[\n\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m}{g_m+\\frac{1}{r_o}+\\frac{1}{R_S}}\n\\]\n\nEquivalently,\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m(R_S\\parallel r_o)}\n{1+g_m(R_S\\parallel r_o)}\n\\]\n\nIf \\(r_o\\) is very large,\n\n\\[\nA_v\\approx \\frac{g_m R_S}{1+g_m R_S}\n\\]\n\nSo the gain is **positive** and **less than 1**, but close to unity when \\(g_mR_S\\gg 1\\). The output “follows” the input, hence the name source follower.\n\nIf the body effect is included, replace \\(g_m\\) in the denominator by \\(g_m+g_{mb}\\) for the gain expression:\n\n\\[\nA_v\n\\approx\n\\frac{g_m(R_S\\parallel r_o)}\n{1+(g_m+g_{mb})(R_S\\parallel r_o)}\n\\]\n\n### Input resistance\n\n\\[\nR_{in}\\approx \\infty\n\\]\n\nbecause the signal is applied to the MOSFET gate.\n\n### Output resistance\n\nLooking into the source node,\n\n\\[\nR_{out}\n=\n\\frac{1}{g_m}\n\\parallel R_S\n\\parallel r_o\n\\]\n\nWith body effect,\n\n\\[\nR_{out}\n=\n\\frac{1}{g_m+g_{mb}}\n\\parallel R_S\n\\parallel r_o\n\\]\n\nIn practice \\(R_{out}\\) is low, approximately \\(1/g_m\\) when \\(R_S\\) and \\(r_o\\) are large.\n\n## Summary\n\n- **Circuit type:** NMOS source follower / common-drain amplifier.\n- **DC behavior:** \\(V_{out}=V_{in}-V_{GS}\\), so the output is level-shifted down from the input.\n- **AC behavior:** Non-inverting, voltage gain slightly less than 1.\n- **Input impedance:** Very high.\n- **Output impedance:** Low.\n- **Typical use:** Voltage buffer or level shifter, not a high-gain voltage amplifier.",
        "format": "markdown",
        "sha256": "4625f2a8fedd3ba7f38687f543204827dd93a716de062d0668fcd0107d7a4cd3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including valid refinements for output resistance and body effect.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 629,
        "output_tokens": 10108,
        "total_tokens": 10737,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 629,
        "output_tokens": 10108,
        "total_tokens": 10737,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower** (also called a **common-drain amplifier**) with a source resistor \\(R_S\\). The drain is tied to \\(V_{DD}\\), the input is applied to the gate, and the output is taken from the source.\n\nAssuming \\(M_1\\) is an enhancement-mode NMOS and is biased in saturation:\n\n### DC analysis\n\\[\nI_D=\\frac12 \\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{TH})^2(1+\\lambda V_{DS})\n\\]\nNeglecting channel-length modulation first:\n\\[\nV_{GS}=V_{in}-V_{out}\n\\]\n\\[\nV_{out}=I_D R_S\n\\]\n\\[\nV_{DS}=V_{DD}-V_{out}\n\\]\nSaturation condition:\n\\[\nV_{DS}\\ge V_{GS}-V_{TH}\n\\]\nwhich is normally satisfied for \\(V_{in}<V_{DD}+V_{TH}\\). The transistor is off if \\(V_{in}<V_{TH}+I_D R_S\\).\n\n### Small-signal analysis\nLet\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\n=\\sqrt{2\\mu_n C_{ox}\\frac{W}{L}I_D}\n=\\frac{2I_D}{V_{GS}-V_{TH}}\n\\]\nand\n\\[\nr_o=\\frac{1}{\\lambda I_D}\n\\]\n\nFor the small-signal model:\n\\[\nv_{gs}=v_{in}-v_{out}\n\\]\n\\[\ni_d=g_m v_{gs}+\\frac{v_{ds}}{r_o}\n=g_m(v_{in}-v_{out})-\\frac{v_{out}}{r_o}\n\\]\nAlso,\n\\[\nv_{out}=i_d R_S\n\\]\nSolving gives the voltage gain:\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\\frac{g_m}{g_m+\\frac{1}{r_o}+\\frac{1}{R_S}}\n\\]\n\nIf \\(r_o\\to\\infty\\), this simplifies to:\n\\[\nA_v=\\frac{g_m R_S}{1+g_m R_S}\n\\]\nSo the gain is positive, less than 1, and approaches 1 when \\(g_mR_S\\gg1\\).\n\n### Output resistance\nWith \\(v_{in}=0\\), applying a test voltage at the output gives:\n\\[\nR_{out}=\\frac{1}{g_m+\\frac{1}{r_o}+\\frac{1}{R_S}}\n=\\left(\\frac{1}{g_m}\\right)\\parallel r_o\\parallel R_S\n\\]\nThus the output resistance is low, approximately \\(1/g_m\\) if \\(R_S\\) is large.\n\n### Input resistance\nIdeally,\n\\[\nR_{in}\\to\\infty\n\\]\nbecause the MOSFET gate draws essentially no DC current.\n\n### Body effect\nIf the body is not tied to the source, the body effect adds a body transconductance \\(g_{mb}\\). Then replace \\(g_m\\) by \\(g_m+g_{mb}\\) in the gain and output-resistance expressions:\n\\[\nA_v=\\frac{g_m(R_S\\parallel r_o)}\n{1+(g_m+g_{mb})(R_S\\parallel r_o)}\n\\]\n\\[\nR_{out}=\\frac{1}{g_m+g_{mb}+\\frac{1}{r_o}+\\frac{1}{R_S}}\n\\]\n\n### Summary\n- Configuration: NMOS source follower / common-drain amplifier.\n- Voltage gain: slightly less than unity, non-inverting.\n- Input resistance: very high.\n- Output resistance: low.\n- Main use: voltage buffer or level shifter; it can drive a low-resistance load while presenting a high impedance to the input source.",
        "format": "markdown",
        "sha256": "55ec38ee992ce3cd4a48c79789135c8dc468220c643011f6cb78c32bc2f3c531"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the required expression. The output-resistance and body-effect refinements are also consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 629,
        "output_tokens": 8867,
        "total_tokens": 9496,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8084,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 629,
        "output_tokens": 8867,
        "total_tokens": 9496,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8084,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an NMOS enhancement-mode MOSFET and is biased in saturation, the circuit is a **common-drain amplifier / source follower**.  \nThe drain is tied to \\(V_{DD}\\) (AC ground), the input is applied to the gate, and the output is taken from the source across \\(R_S\\).\n\n## 1. DC analysis\n\nThe gate draws no DC current, so\n\\[\nI_D=\\frac{V_{out}}{R_S}\n\\]\n\nFor saturation,\n\\[\nI_D=\\frac12 k_n'\\frac{W}{L}(V_{GS}-V_{TH})^2\n\\]\nwith\n\\[\nV_{GS}=V_{in}-V_{out}=V_{in}-I_D R_S\n\\]\nThus\n\\[\nI_D=\\frac12 k_n'\\frac{W}{L}(V_{in}-I_D R_S-V_{TH})^2\n\\]\n\nSolving for the overdrive voltage \\(V_{ov}=V_{GS}-V_{TH}\\):\n\\[\nV_{ov}=V_{in}-V_{out}-V_{TH}\n=\\frac{-1+\\sqrt{1+2k_n'(W/L)R_S(V_{in}-V_{TH})}}\n{k_n'(W/L)R_S}\n\\]\nThen\n\\[\nI_D=\\frac12 k_n'\\frac{W}{L}V_{ov}^2,\\qquad\nV_{out}=I_D R_S\n\\]\n\nSaturation conditions:\n\\[\nV_{in}-V_{out}>V_{TH}\n\\]\nand\n\\[\nV_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{TH}\n\\]\ni.e.\n\\[\nV_{DD}\\ge V_{in}-V_{TH}\n\\]\n\nIf \\(V_{in}<V_{TH}\\), \\(M_1\\) is off and \\(V_{out}\\approx 0\\).\n\n## 2. Small-signal analysis\n\nLet\n\\[\ng_m=k_n'\\frac{W}{L}(V_{GS}-V_{TH})\n=\\sqrt{2k_n'\\frac{W}{L}I_D}\n\\]\nand\n\\[\nr_o=\\frac{1}{\\lambda I_D}\n\\]\nif channel-length modulation is included.\n\nThe small-signal gate-source voltage is\n\\[\nv_{gs}=v_{in}-v_{out}\n\\]\nKCL at the source gives\n\\[\n-g_m(v_{in}-v_{out})+\\frac{v_{out}}{r_o}+\\frac{v_{out}}{R_S}=0\n\\]\n\n### Voltage gain\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\\frac{g_m}{g_m+\\frac1{r_o}+\\frac1{R_S}}\n\\]\n\nEquivalently,\n\\[\nA_v=\\frac{g_m(R_S\\parallel r_o)}{1+g_m(R_S\\parallel r_o)}\n\\]\n\nIf \\(r_o\\to\\infty\\),\n\\[\nA_v=\\frac{g_mR_S}{1+g_mR_S}<1\n\\]\nand \\(A_v\\approx 1\\) when \\(g_mR_S\\gg 1\\).  \nThe gain is **non-inverting** and slightly less than unity.\n\n### Input resistance\nAt low frequency,\n\\[\nR_{in}\\approx \\infty\n\\]\nbecause the MOSFET gate draws essentially no current.\n\n### Output resistance\nLooking into the output node,\n\\[\nR_{out}=\\frac{1}{g_m+\\frac1{r_o}+\\frac1{R_S}}\n\\approx \\frac1{g_m}\\parallel r_o\\parallel R_S\n\\]\nUsually \\(R_{out}\\approx 1/g_m\\), which is low. Thus the circuit acts as a voltage buffer.\n\n## 3. Body effect\n\nThe body terminal is not shown. If the body is tied to ground instead of the source, replace \\(g_m\\) by \\(g_m+g_{mb}\\) in the denominators:\n\\[\nA_v=\\frac{g_m}{g_m+g_{mb}+\\frac1{r_o}+\\frac1{R_S}}\n\\]\n\\[\nR_{out}=\\frac{1}{g_m+g_{mb}+\\frac1{r_o}+\\frac1{R_S}}\n\\]\n\n## 4. Summary of operation\n\n- Topology: NMOS source follower / common-drain amplifier.\n- Output follows input with a DC level shift:\n  \\[\n  V_{out}=V_{in}-V_{GS}\n  \\]\n- Voltage gain: \\(0<A_v<1\\), typically close to 1.\n- Phase shift: \\(0^\\circ\\), non-inverting.\n- Input resistance: very high.\n- Output resistance: low, approximately \\(1/g_m\\).\n- Main use: voltage buffer or level shifter.\n\nIf an external load \\(R_L\\) is connected to \\(V_{out}\\), replace \\(R_S\\) by \\(R_S\\parallel R_L\\) in the small-signal gain and output-resistance expressions.",
        "format": "markdown",
        "sha256": "02a3ccb534e6a4065dc5aa5af61bfce2b4f428f0d2eaeb81ba79fbb56361ce55"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain gm·RS/(1 + gm·RS). The supplementary analyses are consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 629,
        "output_tokens": 14560,
        "total_tokens": 15189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 629,
        "output_tokens": 14560,
        "total_tokens": 15189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming M1 is an **n-channel enhancement MOSFET** and its body/bulk is tied to ground/source, the circuit is a **common-source NMOS amplifier with a resistive load** \\(R_D\\). It is also the basic NMOS inverter if used digitally.\n\n## 1. Large-signal (DC) operation\n\nLet  \n- \\(V_{GS}=V_{in}\\)  \n- \\(V_{DS}=V_{out}\\)  \n- \\(V_T\\) = MOSFET threshold voltage  \n- \\(K=\\frac12 \\mu_n C_{ox}\\frac{W}{L}\\)\n\n### Cutoff region\nIf \\(V_{in}<V_T\\), M1 is off:\n\\[\nI_D=0\n\\]\n\\[\nV_{out}=V_{DD}\n\\]\n\n### Saturation region\nIf\n\\[\nV_{in}>V_T \\quad \\text{and} \\quad V_{out}\\ge V_{in}-V_T\n\\]\nthen M1 operates in saturation:\n\\[\nI_D=\\frac12 \\mu_n C_{ox}\\frac{W}{L}(V_{in}-V_T)^2\n=K(V_{in}-V_T)^2\n\\]\n\\[\nV_{out}=V_{DD}-I_D R_D\n\\]\nSo:\n\\[\nV_{out}=V_{DD}-K R_D (V_{in}-V_T)^2\n\\]\nThis is the normal amplification region.\n\n### Triode region\nIf\n\\[\nV_{in}>V_T \\quad \\text{and} \\quad V_{out}<V_{in}-V_T\n\\]\nthen M1 enters the triode region:\n\\[\nI_D=2K\\left[(V_{in}-V_T)V_{out}-\\frac12 V_{out}^2\\right]\n\\]\nand \\(V_{out}\\) is found by solving:\n\\[\nV_{out}=V_{DD}-I_D R_D\n\\]\n\nThe boundary between saturation and triode occurs at:\n\\[\nV_{out}=V_{in}-V_T\n\\]\n\n## 2. Small-signal AC analysis\n\nAssume the transistor is biased in saturation at a Q-point:\n\\[\nV_{GSQ}=V_{in,Q},\\qquad I_{DQ},\\qquad V_{DSQ}=V_{out,Q}\n\\]\n\nSmall-signal parameters:\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\\bigg|_Q\n=2K(V_{GSQ}-V_T)\n=\\sqrt{4K I_{DQ}}\n\\]\n\nIf channel-length modulation is included:\n\\[\nr_o=\\frac{1}{\\lambda I_{DQ}}\n\\]\notherwise \\(r_o\\to\\infty\\).\n\nThe small-signal voltage gain is:\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=-g_m(R_D\\parallel r_o)\n\\]\nIf \\(r_o\\) is neglected:\n\\[\nA_v\\approx -g_mR_D\n\\]\nThe negative sign indicates a \\(180^\\circ\\) phase inversion.\n\nInput resistance:\n\\[\nR_{in}\\approx \\infty\n\\]\nbecause the MOSFET gate draws essentially no DC current.\n\nOutput resistance:\n\\[\nR_{out}=R_D\\parallel r_o\n\\]\n\n## 3. Summary\n\n- \\(V_{in}<V_T\\): M1 off, \\(V_{out}=V_{DD}\\)\n- \\(V_{in}>V_T\\) and saturation: amplifier region, output decreases quadratically with \\(V_{in}\\)\n- Large \\(V_{in}\\): M1 goes into triode, \\(V_{out}\\) falls toward a low value\n- Small-signal gain: \\(A_v=-g_m(R_D\\parallel r_o)\\)\n- Used as a voltage amplifier or as a simple NMOS inverter with resistor load\n\nIf numerical values for \\(V_{DD}, R_D, V_T, K\\) are given, the Q-point and exact gain can be calculated by substituting them into the above equations.",
        "format": "markdown",
        "sha256": "b17cd714fd3eba660a98d0255214aa2753f4dad5645200ed9f22dca99b7c74d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology: Vin is applied to M1’s source while its gate is DC-biased and AC-grounded, making this a common-gate stage. Thus its claimed infinite input resistance and negative common-source gain are wrong; the expected input resistance is about 1/gm and the gain is non-inverting.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 608,
        "output_tokens": 11718,
        "total_tokens": 12326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10647,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 608,
        "output_tokens": 11718,
        "total_tokens": 12326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10647,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an NMOS transistor and is biased in saturation.\n\n### 1. Circuit identification\nThe input signal \\(V_{in}\\) drives the **source**, the gate is connected to \\(V_{DD}\\) (AC ground), and the output \\(V_{out}\\) is taken from the **drain**.  \nSo this is a **common-gate NMOS amplifier** with a resistor load \\(R_D\\).\n\n### 2. DC bias\nLet the DC input level be \\(V_{IN}\\). Then\n\\[\nV_S=V_{IN},\\qquad V_G=V_{DD}\n\\]\n\\[\nV_{GS}=V_{DD}-V_{IN}\n\\]\n\\[\nI_D=\\frac12 k_n(V_{GS}-V_{th})^2(1+\\lambda V_{DS})\n\\]\nwhere \\(k_n=\\mu_n C_{ox}W/L\\). Neglecting \\(\\lambda\\),\n\\[\nI_D\\approx \\frac12 k_n(V_{GS}-V_{th})^2\n\\]\n\\[\nV_{OUT}=V_{DD}-I_D R_D\n\\]\nSaturation condition:\n\\[\nV_{DS}=V_{OUT}-V_{IN} \\ge V_{GS}-V_{th}\n\\]\n\n### 3. Small-signal analysis\nAt AC, \\(V_{DD}\\) is ground.  \nSource signal: \\(v_s=v_{in}\\), gate AC ground, so\n\\[\nv_{gs}=-v_{in}\n\\]\nSmall-signal transconductance:\n\\[\ng_m=k_n(V_{GS}-V_{th})=\\sqrt{2k_n I_D}\n\\]\nSmall-signal drain current:\n\\[\ni_d=g_m v_{gs}=-g_m v_{in}\n\\]\n\nNeglecting channel-length modulation \\(r_o\\):\n\\[\nv_{out}=-i_d R_D=g_m R_D v_{in}\n\\]\nSo\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=g_m R_D\n\\]\n\nInput resistance at the source:\n\\[\nR_{in}\\approx \\frac{1}{g_m}\n\\]\nOutput resistance at the drain:\n\\[\nR_{out}\\approx R_D\n\\]\n\nIncluding \\(r_o=1/(\\lambda I_D)\\):\n\\[\nA_v=\\frac{(g_m r_o+1)R_D}{r_o+R_D}\\approx g_m(R_D\\parallel r_o)\n\\]\n\\[\nR_{in}=\\frac{r_o+R_D}{1+g_m r_o}\n\\]\n\\[\nR_{out}=R_D\\parallel r_o\n\\]\n\n### 4. Key conclusions\n- The common-gate amplifier is **non-inverting**.\n- Voltage gain is positive: \\(A_v\\approx g_mR_D\\).\n- It has **low input resistance** \\(\\approx 1/g_m\\) and moderate/high output resistance.\n- It is often used as a current buffer or high-frequency amplifier because the input pole is not multiplied by Miller effect.",
        "format": "markdown",
        "sha256": "4ef425755dae5956c4b102fb5e8cd520d6b8cf529039a103382eef18be2d3738"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology with source input and AC-grounded gate, and gives the positive gain and low input resistance. The added small-signal expressions including ro are also consistent with the circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 608,
        "output_tokens": 13961,
        "total_tokens": 14569,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11693,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 608,
        "output_tokens": 13961,
        "total_tokens": 14569,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11693,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an enhancement-mode n-channel MOSFET (body tied to source/body effect neglected unless noted), the circuit is a **resistor-loaded common-gate stage**:\n\n- Gate: fixed at \\(V_{DD}\\), so it is a small-signal ground.\n- Source: driven by \\(V_{\\rm in}\\).\n- Drain: output node, connected to \\(V_{DD}\\) through \\(R_D\\).\n\nThus the input signal is applied to the source and the output is taken from the drain. The stage is **non-inverting**: an increase in \\(V_{\\rm in}\\) decreases \\(V_{GS}\\), decreases drain current, and therefore raises \\(V_{\\rm out}\\).\n\n### Large-signal/DC operation\n\nFor an n-MOSFET,\n\\[\nV_{GS}=V_G-V_S=V_{DD}-V_{\\rm in},\n\\qquad\nV_{DS}=V_{\\rm out}-V_{\\rm in}.\n\\]\n\nDefine\n\\[\nV_{OV}=V_{GS}-V_T=V_{DD}-V_{\\rm in}-V_T.\n\\]\n\n- **Cutoff** if\n\\[\nV_{\\rm in}\\ge V_{DD}-V_T:\n\\qquad I_D=0,\\quad V_{\\rm out}=V_{DD}.\n\\]\n\n- **Saturation/active region** if\n\\[\nV_{\\rm in}<V_{DD}-V_T,\n\\qquad\nV_{DS}\\ge V_{OV}\n\\]\nwhich is equivalent to\n\\[\nV_{\\rm out}>V_{DD}-V_T\n\\quad\\Longleftrightarrow\\quad\nI_D R_D<V_T.\n\\]\nThen, neglecting channel-length modulation first,\n\\[\nI_D\\simeq \\frac12 k_n (V_{DD}-V_{\\rm in}-V_T)^2,\n\\qquad\nV_{\\rm out}=V_{DD}-I_D R_D,\n\\]\nwith\n\\[\nk_n=\\mu_n C_{ox}\\frac{W}{L}.\n\\]\nMore accurately,\n\\[\nI_D=\\frac12 k_n (V_{DD}-V_{\\rm in}-V_T)^2\n\\bigl[1+\\lambda(V_{\\rm out}-V_{\\rm in})\\bigr].\n\\]\n\n- **Triode/linear region** if\n\\[\nV_{\\rm in}<V_{DD}-V_T,\\qquad\nV_{\\rm out}<V_{DD}-V_T,\n\\]\nor equivalently \\(I_DR_D>V_T\\). Then\n\\[\nI_D=k_n\\!\\left[(V_{DD}-V_{\\rm in}-V_T)(V_{\\rm out}-V_{\\rm in})\n-\\frac12(V_{\\rm out}-V_{\\rm in})^2\\right],\n\\]\nagain with\n\\[\nV_{\\rm out}=V_{DD}-I_D R_D.\n\\]\n\nAs \\(V_{\\rm in}\\) is reduced, \\(M_1\\) conducts more and pulls \\(V_{\\rm out}\\) down; in strong conduction it eventually enters triode. As \\(V_{\\rm in}\\) approaches \\(V_{DD}-V_T\\), \\(M_1\\) turns off and \\(V_{\\rm out}\\to V_{DD}\\).\n\n### Small-signal model in saturation\n\nAt a quiescent bias point \\((V_{in,Q},V_{out,Q},I_{D,Q})\\),\n\\[\ng_m=\\mu_n C_{ox}\\frac{W}{L}(V_{DD}-V_{in,Q}-V_T)\n=\\sqrt{2k_n I_{D,Q}},\n\\]\n\\[\nr_o\\approx \\frac{1}{\\lambda I_{D,Q}}.\n\\]\n\nUsing the small-signal model,\n\\[\nv_{gs}=-v_{\\rm in},\n\\qquad\nv_{ds}=v_{\\rm out}-v_{\\rm in},\n\\]\nand\n\\[\ni_d=-g_m v_{\\rm in}+\\frac{v_{\\rm out}-v_{\\rm in}}{r_o}.\n\\]\nWith \\(v_{\\rm out}=-i_dR_D\\),\n\\[\nA_v=\\frac{v_{\\rm out}}{v_{\\rm in}}\n=\n\\frac{(1+g_mr_o)R_D}{R_D+r_o}\n\\simeq g_m(R_D\\parallel r_o),\n\\]\nso\n\\[\n\\boxed{A_v\\approx g_m(R_D\\parallel r_o)>0.}\n\\]\nIf channel-length modulation is neglected, \\(r_o\\to\\infty\\) and\n\\[\n\\boxed{A_v\\approx g_mR_D.}\n\\]\n\nThe input resistance looking into the source is\n\\[\n\\boxed{R_{\\rm in}\\approx \\frac1{g_m}}\n\\]\nfor large \\(r_o\\), and more exactly\n\\[\nR_{\\rm in}=\\frac{R_D+r_o}{1+g_m r_o}.\n\\]\nThe output resistance, with the input driven by an ideal voltage source, is\n\\[\n\\boxed{R_{\\rm out}=R_D\\parallel r_o.}\n\\]\nIf the input source has a series resistance \\(R_s\\), the gain is reduced by voltage division:\n\\[\n\\frac{v_{\\rm out}}{v_{\\rm in}}\n\\simeq\n\\frac{R_D}{R_{\\rm in}+R_s}.\n\\]\n\nIf body effect is included, replace \\(g_m\\) in the common-gate formulas by an effective transconductance \\(g_m+g_{mb}\\), where \\(g_{mb}\\) is the body-effect transconductance.\n\nSo, in summary: the circuit is a **common-gate NMOS amplifier with a resistive drain load**. It gives a non-inverted output, has low input resistance \\((\\sim 1/g_m)\\), relatively high output resistance \\((\\sim R_D\\parallel r_o)\\), and must be biased in saturation (with \\(I_DR_D<V_T\\)) for linear amplification.",
        "format": "markdown",
        "sha256": "e44d4389b6c2571e6b390ac5ccf0f630c1df219b5224194d3fc0129f0711238a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology, non-inverting gain, and approximately 1/gm input resistance. The gain and ro expressions are also correct; the additional bias-region discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 608,
        "output_tokens": 26950,
        "total_tokens": 27558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25769,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 608,
        "output_tokens": 26950,
        "total_tokens": 27558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25769,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS common-gate amplifier** (with an apparent grounding issue as drawn).\n\n### 1. Identification\n- **M₁**: NMOS transistor.\n- **V_DD, R_D**: drain supply and drain resistor.\n- **V_b**: DC gate bias.\n- **C₁**: input coupling capacitor.\n- **V_in**: AC input applied to the source.\n- **V_out**: output taken from the drain.\n\n### 2. DC Analysis\nAt DC, C₁ is open, so V_in does not affect the bias.\n\n- Gate voltage:  \n  \\[\n  V_G = V_b\n  \\]\n- Source voltage:  \n  \\[\n  V_S = 0 \\quad \\text{(as drawn, source is grounded)}\n  \\]\n- Gate-to-source voltage:  \n  \\[\n  V_{GS} = V_b - 0 = V_b\n  \\]\n- Drain current in saturation:  \n  \\[\n  I_D = \\frac{1}{2} k_n \\frac{W}{L} (V_b - V_{th})^2 (1 + \\lambda V_{DS})\n  \\]\n  where \\(k_n = \\mu_n C_{ox}\\).\n- Output DC voltage:  \n  \\[\n  V_{out} = V_D = V_{DD} - I_D R_D\n  \\]\n- Saturation condition:  \n  \\[\n  V_{DS} > V_{GS} - V_{th}\n  \\]\n  i.e.\n  \\[\n  V_{DD} - I_D R_D > V_b - V_{th}\n  \\]\n\n### 3. AC Analysis\nFor the intended common-gate operation, the input is applied to the source and the gate is AC ground. The small-signal parameters are:\n\\[\ng_m = \\sqrt{2 k_n \\frac{W}{L} I_D}\n\\]\n\\[\nr_o = \\frac{1}{\\lambda I_D}\n\\]\n\nIf the source is properly biased with a source resistance/current-source \\(R_S\\), the common-gate small-signal results are:\n\n- Voltage gain:\n  \\[\n  A_v = \\frac{v_{out}}{v_{in}} = (g_m + \\frac{1}{r_o})(R_D \\parallel r_o)\n  \\]\n  \\[\n  A_v \\approx g_m R_D \\quad \\text{if } r_o \\gg R_D\n  \\]\n\n- Input resistance at the source:\n  \\[\n  R_{in} \\approx R_S \\parallel \\frac{1}{g_m}\n  \\]\n\n- Output resistance at the drain:\n  \\[\n  R_{out} \\approx R_D \\parallel r_o\n  \\]\n\n### 4. Important Note on the Figure\nAs drawn, the source is **directly grounded**. At AC, C₁ is a short, so the input signal is shorted to ground:\n\\[\nv_s = 0 \\Rightarrow v_{gs} = 0 \\Rightarrow i_d = 0 \\Rightarrow v_{out} = 0\n\\]\nThus the circuit as shown has **zero AC voltage gain**.\n\nFor it to operate as a normal common-gate amplifier, there must be a source bias resistor or current source between the source and ground, not a direct short. The DC bias equations above still apply, but AC amplification requires that missing source impedance.",
        "format": "markdown",
        "sha256": "9249be67034d1a55c419ccb483e48ff85d33cb706c33bb82ce44df07e72bcab7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer notices that the source is hard-shorted to ground and correctly concludes that the input is shorted and the ideal AC voltage gain is zero, satisfying the full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 905,
        "output_tokens": 31276,
        "total_tokens": 32181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30564,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 905,
        "output_tokens": 31276,
        "total_tokens": 32181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30564,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming M1 is an NMOS transistor and C1 is a short circuit at the signal frequency, the circuit is a **common-gate amplifier**: the input drives the source, the gate is biased at \\(V_b\\) and is an AC ground, and the output is taken from the drain.\n\n### DC bias\nWith the source grounded and gate at \\(V_b\\):\n\\[\nV_G=V_b,\\qquad V_S=0,\\qquad V_{GS}=V_b\n\\]\nFor saturation,\n\\[\nI_D=\\frac12 k_n(V_b-V_{TH})^2,\\qquad k_n=\\mu_nC_{ox}\\frac WL\n\\]\n\\[\nV_{out}=V_D=V_{DD}-I_DR_D\n\\]\nSaturation requires\n\\[\nV_{DS}=V_D>V_{GS}-V_{TH}=V_b-V_{TH}\n\\]\nand \\(V_b>V_{TH}\\) for an NMOS device.\n\nSmall-signal parameters:\n\\[\ng_m=k_n(V_b-V_{TH})=\\sqrt{2k_nI_D}\n\\]\n\\[\nr_o=\\frac{V_A}{I_D}\\quad \\text{or}\\quad r_o=\\frac{1}{\\lambda I_D}\n\\]\n\n### Small-signal AC analysis\nAt midband, C1 is shorted, so the source small-signal voltage is \\(v_i\\), and\n\\[\nv_{gs}=0-v_i=-v_i\n\\]\n\nKCL at the output node gives\n\\[\n-g_mv_i+\\frac{v_o-v_i}{r_o}+\\frac{v_o}{R_D}=0\n\\]\nThus\n\\[\nv_o\\left(\\frac1{r_o}+\\frac1{R_D}\\right)=v_i\\left(g_m+\\frac1{r_o}\\right)\n\\]\n\\[\n\\boxed{A_v=\\frac{v_o}{v_i}\n=\\frac{1+g_mr_o}{1+r_o/R_D}\n=\\left(g_m+\\frac1{r_o}\\right)(R_D\\parallel r_o)}\n\\]\nIf \\(r_o\\to\\infty\\),\n\\[\n\\boxed{A_v\\approx g_mR_D}\n\\]\nThe gain is positive/non-inverting from source to drain.\n\nInput resistance looking into the source:\n\\[\n\\boxed{R_{in}=\\frac{v_i}{i_i}\n=\\frac{R_D+r_o}{1+g_mr_o}\n\\approx \\frac1{g_m}}\n\\]\nThe approximation holds for \\(g_mr_o\\gg1\\).\n\nOutput resistance with the input source set to zero:\n\\[\n\\boxed{R_{out}=R_D\\parallel r_o}\n\\]\nIf \\(r_o\\to\\infty\\), then \\(R_{out}\\approx R_D\\).\n\n### Result summary\n\\[\n\\boxed{\nA_v \\approx g_mR_D,\\qquad\nR_{in}\\approx \\frac1{g_m},\\qquad\nR_{out}\\approx R_D\n}\n\\]\nfor the simplified case \\(r_o\\to\\infty\\). More exactly, include \\(r_o\\) as shown above.\n\n*Note:* If the source is directly shorted to AC ground as drawn, the input signal would be shunted and the ideal small-signal output would be zero. The common-gate expressions above apply when the source is the intended AC input node, e.g. when the DC bias is provided by a current source/bias network.",
        "format": "markdown",
        "sha256": "e63cb236b82f69c55462eab5fd41c2d7ba00afc6bb075fa4df7c97e09571cf85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer explicitly recognizes that the source is shorted to AC ground as drawn and states that the input is shunted, giving ideally zero output. Its common-gate formulas are clearly limited to a different circuit without that short.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 905,
        "output_tokens": 27377,
        "total_tokens": 28282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26677,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 905,
        "output_tokens": 27377,
        "total_tokens": 28282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26677,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming M1 is an NMOS enhancement-mode MOSFET, the circuit is intended as a **common-gate amplifier** with dc gate bias \\(V_b\\) and ac input coupled to the source through \\(C_1\\).\n\n### DC analysis\n- Capacitor \\(C_1\\) is open at dc, so the ac source \\(V_{in}\\) does not affect the dc bias.\n- Gate voltage:  \n  \\[\n  V_G=V_b,\\qquad V_S=0\\text{ V (as drawn)}\n  \\]\n  \\[\n  V_{GS}=V_b\n  \\]\n- If \\(V_b<V_{th}\\), M1 is off:  \n  \\[\n  I_D=0,\\qquad V_{out}=V_{DD}\n  \\]\n- If \\(V_b>V_{th}\\), assuming saturation:  \n  \\[\n  I_D=\\frac12 k_n(V_b-V_{th})^2(1+\\lambda V_{out})\n  \\]\n  \\[\n  V_{out}=V_{DD}-I_D R_D\n  \\]\n  where \\(k_n=\\mu_n C_{ox}W/L\\). A more exact solution may require checking whether the device is in triode; if not, replace the \\(I_D\\) equation by the triode expression.\n\n### Small-signal analysis\nThe MOSFET small-signal parameters are  \n\\[\ng_m=\\sqrt{2k_n I_D}=\\frac{2I_D}{V_{GS}-V_{th}},\\qquad\nr_o\\approx \\frac{1}{\\lambda I_D}\n\\]\n\nAs drawn, however, the source is **directly grounded**, so at ac the source is shorted to ground. The input signal is therefore shorted through \\(C_1\\), giving  \n\\[\nv_{gs}=0,\\qquad v_{out}=0\n\\]\nThus, literally, the circuit as drawn has  \n\\[\nA_v=\\frac{v_{out}}{v_{in}}=0\n\\]\nand it does not amplify. This is probably a drawing error.\n\nIf the intended standard common-gate configuration is used, where the source is the input node and the gate is ac-grounded, the small-signal results are approximately:\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\\approx g_m(R_D\\parallel r_o)\n\\]\n\\[\nR_{in}\\approx \\frac{1}{g_m}\n\\]\nor, including \\(r_o\\),\n\\[\nR_{in}=\\frac{R_D+r_o}{1+g_m r_o}\n\\]\n\\[\nR_{out}\\approx R_D\\parallel r_o\n\\]\n\nSo the circuit should be understood as a common-gate MOSFET stage; with the direct source ground present, the ac input is shorted and the gain is zero.",
        "format": "markdown",
        "sha256": "0a401da3b49e2c3d300b2e66f943ebe752c282705c1c57be3b07d25b51a2e7ee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source is directly grounded, so the input is shorted and the ideal voltage gain is zero, as required for full credit.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 907,
        "output_tokens": 19559,
        "total_tokens": 20466,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 907,
        "output_tokens": 19559,
        "total_tokens": 20466,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nReason: The MOSFET source is grounded, so \\(C_{SB}\\) is shorted and does not affect the small-signal response. In the small-signal model, there are effectively two independent capacitive nodes — the gate node and the drain node — with capacitors \\(C_{GS}\\), \\(C_{GD}\\), and \\(C_{DB}\\). The transfer function therefore has a second-order denominator, giving **two poles**.",
        "format": "markdown",
        "sha256": "ab897fbcbdb11714ace214fe966326e44f760526c54127e7b015d153385f4ed8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and explains that grounded-source C_SB is shorted out, leaving two independent capacitive nodes and a second-order response.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 996,
        "output_tokens": 12894,
        "total_tokens": 13890,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12802,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 996,
        "output_tokens": 12894,
        "total_tokens": 13890,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12802,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nReason: In the high-frequency small-signal model, **C_SB** is connected between ground and ground (since the source is grounded), so it does not contribute. The effective capacitors are **C_GS**, **C_GD**, and **C_DB**, which form a second-order RC network with one pole at the input/gate node and one pole at the output/drain node.\n\n\\[\n\\boxed{2}\n\\]",
        "format": "markdown",
        "sha256": "ca206e3ec7fcac280ce63a9664af99312f67854498584eebff9c9a96794910d7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives two poles and identifies that C_SB is shorted out because both terminals are grounded, accounting for the capacitors as required by the full-credit rule.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 996,
        "output_tokens": 5908,
        "total_tokens": 6904,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 996,
        "output_tokens": 5908,
        "total_tokens": 6904,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nAlthough there are four capacitors, one of them is effectively shorted and does not create an independent pole:\n\n- \\(C_{SB}\\) is connected from source to ground, but the source is at AC ground (as indicated by \\(C_{GS}\\) being returned to ground), so \\(C_{SB}\\) is shorted.\n- The remaining capacitors \\(C_{GS}\\), \\(C_{GD}\\), and \\(C_{DB}\\) form a capacitor loop, so only **two independent capacitor voltages** exist.\n- Therefore, the small-signal transfer function has a **second-order denominator**, giving **2 poles**.\n\n**Answer: 2**",
        "format": "markdown",
        "sha256": "9e885111e1b1f2dc340b9ef8226c44a6f9a495639fbdeef11aefc90ea301d697"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count by noting that CSB is shorted and the other three capacitors have only two independent voltages.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 997,
        "output_tokens": 18048,
        "total_tokens": 19045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 997,
        "output_tokens": 18048,
        "total_tokens": 19045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume M1 is an n-channel enhancement MOSFET, with its body tied to its source, and that it is biased in saturation. Let\n\n\\[\n\\beta=\\frac{R_2}{R_1+R_2},\\qquad R_L=R_1+R_2,\\qquad R_{eq}=R_D\\parallel R_L\n\\]\n\n## 1. What the circuit is\n\n- Input is applied to the MOSFET **source**.\n- Output is taken from the **drain**.\n- \\(R_1,R_2\\) sense \\(V_{out}\\) and feed a fraction \\(\\beta V_{out}\\) back to the **gate**.\n- Therefore this is a **common-gate amplifier with negative feedback** (series-shunt feedback):  \n  if \\(V_{out}\\) tries to increase, \\(V_F=\\beta V_{out}\\) increases, \\(V_{GS}\\) increases, \\(I_D\\) increases, and \\(V_{out}=V_{DD}-I_D R_D\\) is pulled back down.\n\n## 2. DC bias\n\nThe feedback divider also loads the output, so\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}-\\frac{V_{out}}{R_1+R_2}\n\\]\n\nand\n\n\\[\nV_F=\\beta V_{out}\n\\]\n\n\\[\nV_{GS}=V_F-V_{in}=\\beta V_{out}-V_{in}\n\\]\n\nFor square-law saturation,\n\n\\[\nI_D=\\frac12 k_n(V_{GS}-V_{TH})^2(1+\\lambda V_{DS})\n\\]\n\nwith\n\n\\[\nV_{DS}=V_{out}-V_{in}\n\\]\n\nEquate the two expressions for \\(I_D\\) and solve for \\(V_{out}\\). Then verify\n\n\\[\nV_{GS}>V_{TH},\\qquad V_{DS}>V_{GS}-V_{TH}\n\\]\n\nfor saturation. If \\(V_{in}\\) has a DC level, use that value in the DC equations.\n\n## 3. Small-signal gain\n\nLet \\(v_{in}\\), \\(v_{out}\\), \\(v_f\\) be small-signal quantities. Then\n\n\\[\nv_f=\\beta v_{out}\n\\]\n\n\\[\nv_{gs}=v_f-v_{in}=\\beta v_{out}-v_{in}\n\\]\n\n\\[\nv_{ds}=v_{out}-v_{in}\n\\]\n\nKCL at the drain gives\n\n\\[\ng_m v_{gs}+\\frac{v_{ds}}{r_o}+\\frac{v_{out}}{R_D}+\\frac{v_{out}}{R_L}=0\n\\]\n\nSubstitute \\(v_{gs}\\) and \\(v_{ds}\\):\n\n\\[\ng_m(\\beta v_{out}-v_{in})\n+\\frac{v_{out}-v_{in}}{r_o}\n+\\frac{v_{out}}{R_D}\n+\\frac{v_{out}}{R_L}=0\n\\]\n\nThus\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m+\\frac1{r_o}}\n{g_m\\beta+\\frac1{r_o}+\\frac1{R_D}+\\frac1{R_L}}\n}\n\\]\n\nIf \\(r_o\\to\\infty\\),\n\n\\[\n\\boxed{\nA_v\\approx\n\\frac{g_m R_{eq}}{1+g_mR_{eq}\\beta}\n}\n\\]\n\nwhere\n\n\\[\nR_{eq}=R_D\\parallel(R_1+R_2)\n\\]\n\nIf the loop gain \\(g_mR_{eq}\\beta\\gg1\\),\n\n\\[\n\\boxed{\nA_v\\approx \\frac1\\beta\n=\n1+\\frac{R_1}{R_2}\n}\n\\]\n\nSo the closed-loop gain is set mainly by the resistor ratio, not by \\(g_m\\).\n\n## 4. Input resistance\n\nThe input current at the source is\n\n\\[\ni_{in}= -i_d\n\\]\n\nThis gives\n\n\\[\n\\boxed{\nR_{in}=\\frac{v_{in}}{i_{in}}\n=\\frac{R_{eq}}{A_v}\n}\n\\]\n\nIf \\(r_o\\to\\infty\\),\n\n\\[\n\\boxed{\nR_{in}\\approx\n\\frac{1+g_mR_{eq}\\beta}{g_m}\n=\n\\frac1{g_m}+\\beta R_{eq}\n}\n\\]\n\nThe feedback increases the input resistance compared with a simple common-gate stage.\n\n## 5. Output resistance\n\nSet \\(v_{in}=0\\) and apply a test voltage \\(v_t\\) at the output. Then \\(v_f=\\beta v_t\\). KCL at the output gives\n\n\\[\ni_t=\\frac{v_t}{R_D}+\\frac{v_t}{R_L}+g_m\\beta v_t+\\frac{v_t}{r_o}\n\\]\n\nso\n\n\\[\n\\boxed{\nR_{out}\n=\n\\frac{1}\n{\\frac1{R_D}+\\frac1{R_L}+g_m\\beta+\\frac1{r_o}}\n}\n\\]\n\nor\n\n\\[\n\\boxed{\nR_{out}\n=\nR_D\\parallel R_L\\parallel r_o\\parallel \\frac1{g_m\\beta}\n}\n\\]\n\nIf \\(r_o\\to\\infty\\), omit the \\(r_o\\) term.\n\n## 6. Feedback summary\n\n- Feedback factor:\n\n\\[\n\\boxed{\\beta=\\frac{R_2}{R_1+R_2}}\n\\]\n\n- Open-loop gain approximately:\n\n\\[\nA_{\\text{open}}\\approx g_mR_{eq}\n\\]\n\n- Loop gain:\n\n\\[\nT=A_{\\text{open}}\\beta\\approx g_mR_{eq}\\beta\n\\]\n\n- Closed-loop gain:\n\n\\[\nA_v\\approx \\frac{A_{\\text{open}}}{1+T}\n\\]\n\nThus the circuit is a negative-feedback MOSFET amplifier whose gain is stabilized by \\(R_1,R_2\\). For large loop gain, \\(v_{out}\\approx (1+R_1/R_2)v_{in}\\).",
        "format": "markdown",
        "sha256": "80d7576c31c3c7d7ceef6d66786077332a3b7506f2b2159f03d4754711eb1177"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven input, output-divider feedback to the gate, and negative feedback. Its closed-loop gain is consistent with the golden result; extra bias and resistance discussions are not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 873,
        "output_tokens": 23424,
        "total_tokens": 24297,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18474,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 873,
        "output_tokens": 23424,
        "total_tokens": 24297,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18474,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a single-stage **NMOS amplifier with drain-to-gate resistive feedback**.  \nThe input is applied to the source, the output is taken from the drain, and \\(R_1,R_2\\) sample \\(V_{out}\\) and feed a fraction back to the gate.\n\nAssumptions: MOSFET operates in saturation, body effect is neglected, gate leakage is zero, and small-signal parameters are \\(g_m\\) and \\(r_o\\).\n\n---\n\n## 1. DC bias\n\nLet\n\\[\n\\beta=\\frac{R_2}{R_1+R_2}\n\\]\nso that the gate voltage is\n\\[\nV_G=V_F=\\beta V_{out}\n\\]\nand the source voltage is\n\\[\nV_S=V_{in}.\n\\]\nThus\n\\[\nV_{GS}=V_G-V_S=\\beta V_{out}-V_{in}\n\\]\n\\[\nV_{DS}=V_{out}-V_{in}.\n\\]\nKVL through \\(R_D\\) gives\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}.\n\\]\nFor saturation,\n\\[\nI_D=\\frac12 K_n(V_{GS}-V_{TN})^2(1+\\lambda V_{DS}).\n\\]\nEquating the two expressions and solving for \\(V_{out}\\) gives the dc operating point:\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\frac12 K_n\n\\left(\\beta V_{out}-V_{in}-V_{TN}\\right)^2\n\\left(1+\\lambda(V_{out}-V_{in})\\right).\n\\]\nChoose the root that satisfies\n\\[\nV_{GS}>V_{TN},\\qquad V_{DS}>V_{GS}-V_{TN}.\n\\]\n\n---\n\n## 2. Small-signal analysis\n\nLet\n\\[\nv_f=\\beta v_{out},\\qquad v_s=v_{in},\\qquad v_d=v_{out}.\n\\]\nThe small-signal drain current is\n\\[\ni_d=g_m v_{gs}+\\frac{v_{ds}}{r_o}\n\\]\nwhere\n\\[\nv_{gs}=v_f-v_s=\\beta v_{out}-v_{in},\n\\]\n\\[\nv_{ds}=v_d-v_s=v_{out}-v_{in}.\n\\]\nSo\n\\[\ni_d=g_m(\\beta v_{out}-v_{in})+\\frac{v_{out}-v_{in}}{r_o}.\n\\]\n\nKCL at the output node gives\n\\[\n\\frac{v_{out}}{R_D}\n+\n\\frac{v_{out}}{R_1+R_2}\n+\ni_d\n=0.\n\\]\nSubstituting \\(i_d\\) and solving for \\(v_{out}/v_{in}\\):\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m+\\frac{1}{r_o}}\n{\\frac{1}{R_D}+\\frac{1}{R_1+R_2}+\\frac{1}{r_o}+g_m\\frac{R_2}{R_1+R_2}}\n}\n\\]\n\nIf \\(r_o\\to\\infty\\), this simplifies to\n\\[\n\\boxed{\nA_v=\n\\frac{g_m R_D(R_1+R_2)}\n{R_1+R_2+R_D+g_mR_DR_2}\n}\n\\]\nFor large loop gain,\n\\[\nA_v\\approx \\frac{1}{\\beta}=\\frac{R_1+R_2}{R_2}.\n\\]\n\n---\n\n## 3. Input resistance\n\nThe input is at the source terminal. With \\(i_{in}=-i_d\\),\n\\[\n\\boxed{\nR_{in}\n=\n\\frac{1}\n{g_m(1-\\beta A_v)+\\frac{1-A_v}{r_o}}\n}\n\\]\nFor \\(r_o\\to\\infty\\),\n\\[\n\\boxed{\nR_{in}\\approx \\frac{1}{g_m(1-\\beta A_v)}\n}\n\\]\nwhich is increased by the negative feedback compared with a simple common-gate stage.\n\n---\n\n## 4. Output resistance\n\nSet \\(v_{in}=0\\), apply a test voltage \\(v_t\\) at the output, and find \\(i_t\\).\n\\[\n\\boxed{\nR_{out}\n=\n\\left[\n\\frac{1}{R_D}\n+\n\\frac{1}{R_1+R_2}\n+\n\\frac{1}{r_o}\n+\ng_m\\frac{R_2}{R_1+R_2}\n\\right]^{-1}\n}\n\\]\nThis is lower than \\(R_D\\parallel(R_1+R_2)\\parallel r_o\\) because the feedback is active.\n\n---\n\n## Summary\n\n- Topology: NMOS common-gate-like amplifier with drain-to-gate voltage feedback.\n- Feedback factor: \\(\\beta=R_2/(R_1+R_2)\\).\n- DC bias is set by the feedback divider \\(R_1,R_2\\).\n- Small-signal gain is positive and approximately \\(1/\\beta\\) when loop gain is large.\n- Negative feedback reduces output resistance and increases input resistance.",
        "format": "markdown",
        "sha256": "9fa3b00b7b84ff694f5029898b81a4a262254ff230005f7678cfc5285ce72838"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. Its positive closed-loop gain is consistent with the golden solution; the DC-bias omission is secondary and not required for full credit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 873,
        "output_tokens": 18226,
        "total_tokens": 19099,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14300,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 873,
        "output_tokens": 18226,
        "total_tokens": 19099,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14300,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming M1 is an n-channel MOSFET biased in saturation (body effect neglected), the circuit is a **common-gate MOSFET amplifier with negative feedback** from drain to gate through \\(R_1,R_2\\).\n\n## 1. DC bias\nThe feedback divider gives\n\\[\nV_F=\\frac{R_2}{R_1+R_2}V_{out}=\\beta V_{out},\n\\qquad\n\\beta=\\frac{R_2}{R_1+R_2}\n\\]\nThe gate-source voltage and drain current are\n\\[\nV_{GS}=V_F-V_{in}\n\\]\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\nIn saturation,\n\\[\nI_D=\\frac12 k_n(V_{GS}-V_{th})^2(1+\\lambda V_{DS}),\n\\qquad\nV_{DS}=V_{out}-V_{in}\n\\]\nThese equations are solved simultaneously for the Q-point. Saturation requires\n\\[\nV_{GS}>V_{th},\\qquad V_{DS}>V_{GS}-V_{th}\n\\]\n\n## 2. Small-signal voltage gain\nLet\n\\[\ng_m=\\left.\\frac{\\partial I_D}{\\partial V_{GS}}\\right|_Q,\\qquad\nr_o=\\frac1{\\lambda I_D},\\qquad g_{ds}=\\frac1{r_o}\n\\]\nApplying KCL at the output node:\n\\[\ng_m(\\beta v_{out}-v_{in})+g_{ds}(v_{out}-v_{in})+\\frac{v_{out}}{R_D}=0\n\\]\nThus\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\\frac{g_m+g_{ds}}{g_m\\beta+g_{ds}+1/R_D}\n}\n\\]\nIf \\(g_{ds}\\ll g_m\\) and \\(g_m\\beta R_D\\gg1\\),\n\\[\n\\boxed{\nA_v\\approx \\frac1\\beta=1+\\frac{R_1}{R_2}\n}\n\\]\nSo the closed-loop gain is set mainly by the resistor ratio \\(R_1/R_2\\), not by MOSFET parameters.\n\n## 3. Input and output resistance\nInput resistance looking into the source:\n\\[\n\\boxed{\nR_{in}\n=\\frac{g_m\\beta+g_{ds}+1/R_D}{g_m+g_{ds}}R_D\n\\approx \\beta R_D+\\frac1{g_m}\n}\n\\]\nOutput resistance with the input source AC-grounded:\n\\[\n\\boxed{\nR_{out}\n=\\frac{1}{g_{ds}+g_m\\beta+1/R_D}\n}\n\\]\nor approximately,\n\\[\nR_{out}\\approx \\frac{1}{g_m\\beta}\\parallel R_D\n\\]\n\n## 4. Feedback interpretation\nThe \\(R_1\\)-\\(R_2\\) network senses \\(V_{out}\\) and feeds back a fraction \\(\\beta V_{out}\\) to the gate. If \\(V_{out}\\) increases, \\(V_F\\) increases, \\(V_{GS}=V_F-V_{in}\\) increases, \\(I_D\\) increases, and the drop across \\(R_D\\) increases, which lowers \\(V_{out}\\). Therefore the feedback is negative.\n\nFor large loop gain,\n\\[\nV_F\\approx V_{in}\n\\]\nso\n\\[\nV_{out}\\approx \\frac{V_{in}}{\\beta}\n=\\left(1+\\frac{R_1}{R_2}\\right)V_{in}\n\\]\nHence the circuit behaves like a non-inverting feedback amplifier whose gain is fixed by \\(R_1\\) and \\(R_2\\).",
        "format": "markdown",
        "sha256": "d763b5eceb9d62e570de48ebbbce89408b9e284478fcccbeb4043ed6fcc01b99"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the source input, divider feedback to the gate, and negative feedback, and gives the correct high-loop-gain result of 1/beta. The finite-gain equations omit divider loading, but that does not change the essential answer required by the full-credit rule.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 768,
        "input_tokens": 873,
        "output_tokens": 20983,
        "total_tokens": 21856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17632,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 768,
        "input_tokens": 873,
        "output_tokens": 20983,
        "total_tokens": 21856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17632,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the standard symbol convention: **M1 is a PMOS transistor** and **M2 is an NMOS transistor**.\n\n## 1. Circuit identification\n- **M1**: PMOS input device.  \n  Source at \\(V_{DD}\\), gate at \\(V_{in}\\), drain at \\(V_{out}\\).\n- **M2**: NMOS current-source load.  \n  Source at ground, gate at bias \\(V_b\\), drain at \\(V_{out}\\).\n\nThus the circuit is a **single-stage PMOS common-source amplifier with an NMOS current-source active load**. Since the input is applied to the gate and the output is taken from the drain, the stage is inverting.\n\n## 2. DC analysis\nFor M1 in saturation:\n\\[\nV_{SG1}=V_{DD}-V_{in},\\qquad V_{SD1}=V_{DD}-V_{out}\n\\]\n\\[\nI_{D1}=\\frac12 \\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1\n\\left(V_{DD}-V_{in}-|V_{THp}|\\right)^2\n\\left(1+\\lambda_p(V_{DD}-V_{out})\\right)\n\\]\n\nFor M2 in saturation:\n\\[\nV_{GS2}=V_b,\\qquad V_{DS2}=V_{out}\n\\]\n\\[\nI_{D2}=\\frac12 \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2\n\\left(V_b-V_{THn}\\right)^2\n\\left(1+\\lambda_n V_{out}\\right)\n\\]\n\nAt the output node, KCL requires:\n\\[\nI_{D1}=I_{D2}\n\\]\nThis equation determines the DC output voltage \\(V_{out}\\). In many hand calculations, channel-length modulation is neglected first; then M2 sets the bias current:\n\\[\nI_B \\approx \\frac12 \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2\n(V_b-V_{THn})^2\n\\]\nand the input DC voltage \\(V_{in}\\) must be set so that M1 supplies this same current.\n\n### Saturation limits\nFor M1:\n\\[\nV_{in} < V_{DD}-|V_{THp}|,\\qquad\nV_{out} \\le V_{in}+|V_{THp}|\n\\]\nFor M2:\n\\[\nV_b > V_{THn},\\qquad\nV_{out} \\ge V_b - V_{THn}\n\\]\nTherefore, for both transistors to remain in saturation:\n\\[\nV_b - V_{THn} \\le V_{out} \\le V_{in}+|V_{THp}|\n\\]\nIf \\(V_{out}\\) goes below this range, M2 enters triode; if it goes above, M1 enters triode. Both cases reduce the small-signal gain.\n\n## 3. Small-signal analysis\nAt midband, \\(V_{DD}\\) and ground are AC grounds, and \\(V_b\\) is a fixed DC bias, so the gate of M2 is also AC ground.\n\nSmall-signal parameters:\n\\[\ng_{m1}=\\sqrt{2\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 I_D}\n=\\frac{2I_D}{V_{SG1}-|V_{THp}|}\n\\]\n\\[\nr_{o1}=\\frac{1}{\\lambda_p I_D},\\qquad\nr_{o2}=\\frac{1}{\\lambda_n I_D}\n\\]\n\nM2 operates as a current-source load; its small-signal output resistance is \\(r_{o2}\\). Its transconductance does not appear because its gate is AC grounded.\n\nWriting KCL at the output node:\n\\[\n-g_{m1}v_{in}-\\frac{v_{out}}{r_{o1}}-\\frac{v_{out}}{r_{o2}}=0\n\\]\nTherefore,\n\\[\nv_{out}=-g_{m1}v_{in}\\,(r_{o1}\\parallel r_{o2})\n\\]\n\nSo the small-signal voltage gain is\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m1}(r_{o1}\\parallel r_{o2})}\n\\]\n\nIf \\(r_{o2}\\gg r_{o1}\\), then\n\\[\nA_v \\approx -g_{m1}r_{o1}\n\\]\nwhich is the intrinsic gain of the PMOS common-source stage.\n\nThe output resistance is\n\\[\n\\boxed{R_{out}=r_{o1}\\parallel r_{o2}}\n\\]\nThe input resistance at low frequency is ideally very high:\n\\[\n\\boxed{R_{in}\\approx \\infty}\n\\]\n\n## 4. Summary\n- **Function**: PMOS common-source inverting amplifier with NMOS current-source load.\n- **Bias**: \\(V_b\\) sets the load current; \\(V_{in}\\) must be biased so M1 conducts that same current and both devices remain in saturation.\n- **Gain**: \\(A_v=-g_{m1}(r_{o1}\\parallel r_{o2})\\), high because the active load presents a large small-signal resistance \\(r_{o2}\\).\n- **Limitations**: Output swing is constrained by keeping M2 and M1 in saturation; high-frequency gain is limited by parasitic capacitances, especially the output pole at \\(R_{out}C_{out}\\) and the Miller effect from \\(C_{gd1}\\).",
        "format": "markdown",
        "sha256": "790c932a1c3037b8e4c096b481ca13172fc2f8c543861d52f1b000a2e8ab88e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a PMOS common-source amplifier and gives an inverting gain. M1 is an NMOS source follower, so the gain is positive and at or slightly below unity.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 629,
        "output_tokens": 14086,
        "total_tokens": 14715,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12940,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 629,
        "output_tokens": 14086,
        "total_tokens": 14715,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12940,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Using the standard MOSFET symbol convention, the circuit is an **NMOS source follower (common-drain amplifier)** with an **NMOS current-source load**.\n\n- **M₁**: NMOS, drain connected to \\(V_{DD}\\), gate driven by \\(V_{in}\\), source connected to \\(V_{out}\\).\n- **M₂**: NMOS, source grounded, gate biased by \\(V_b\\), drain connected to \\(V_{out}\\). It acts as a current sink.\n\n## 1. DC Analysis\n\nAssume both transistors operate in saturation and neglect channel-length modulation for a simple estimate.\n\nFor M₂, the bias current is set by \\(V_b\\):\n\n\\[\nI_D \\approx \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_b - V_{th2})^2\n\\]\n\nFor M₁, this same current flows through the source follower:\n\n\\[\nI_D \\approx \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{in}-V_{out}-V_{th1})^2\n\\]\n\nSolving for \\(V_{out}\\):\n\n\\[\nV_{out}=V_{in}-V_{th1}-\\sqrt{\\frac{2I_D}{\\mu_n C_{ox}(W/L)_1}}\n\\]\n\nSo the output follows the input, shifted down by the gate-source voltage of M₁:\n\n\\[\nV_{out}=V_{in}-V_{GS1}\n\\]\n\nSaturation conditions:\n\n- M₂: \\(V_{out} > V_b - V_{th2}\\)\n- M₁: \\(V_{DD} > V_{in}-V_{th1}\\), usually satisfied.\n\n## 2. Small-Signal Analysis\n\nLet\n\n\\[\ng_{m1}=\\sqrt{2\\mu_n C_{ox}(W/L)_1 I_D}\n\\]\n\n\\[\nr_{o1}=\\frac{1}{\\lambda_1 I_D},\\qquad\nr_{o2}=\\frac{1}{\\lambda_2 I_D}\n\\]\n\nIncluding the body effect for M₁, let \\(g_{mb1}\\) be its body transconductance.\n\nNodal analysis at \\(V_{out}\\) gives the voltage gain:\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}}\n\\]\n\nIf body effect and \\(r_{o1},r_{o2}\\) are neglected,\n\n\\[\nA_v \\approx 1\n\\]\n\nbut is always slightly less than unity. The output resistance is\n\n\\[\nR_{out}\n=\n\\frac{1}\n{g_{m1}+g_{mb1}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}}\n\\approx\n\\frac{1}{g_{m1}+g_{mb1}}\n\\]\n\nThe input resistance is very high because it is a MOSFET gate:\n\n\\[\nR_{in}\\rightarrow \\infty\n\\]\n\n## Conclusion\n\nThe circuit is a **source follower / voltage buffer**:\n\n- Non-inverting\n- Voltage gain slightly less than 1\n- High input impedance\n- Low output impedance\n- Output level shifted by \\(V_{GS1}\\) below the input\n\nM₂ simply sets the DC bias current, and M₁ conducts that current while buffering the input voltage to the output.",
        "format": "markdown",
        "sha256": "bffce1ccfd93553415a7e1a9886aa68e019eb4009378dbfeb5fe6114760f219b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, and gives the positive, slightly sub-unity gain with body effect and output resistance included. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 631,
        "output_tokens": 14380,
        "total_tokens": 15011,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13659,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 631,
        "output_tokens": 14380,
        "total_tokens": 15011,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13659,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the symbols are standard 3-terminal NMOS devices, the circuit is a **current-source-loaded source follower (common-drain amplifier)**.\n\n- **M1** is the amplifying NMOS transistor.\n- **M2** is an NMOS current-source load biased by \\(V_b\\).\n- M1: drain at \\(V_{DD}\\), gate at \\(V_{in}\\), source at \\(V_{out}\\).\n- M2: drain at \\(V_{out}\\), source at ground, gate at \\(V_b\\).\n\n---\n\n### 1. DC bias\n\nM2 sets the bias current if it is in saturation:\n\\[\nI_D=\\frac12 k_n'\\left(\\frac WL\\right)_2 (V_b-V_{th})^2\n\\]\nwhere \\(k_n'=\\mu_n C_{ox}\\).\n\nM1 must carry the same current. For M1,\n\\[\nV_{GS1}=V_{in}-V_{out}\n\\]\nand in saturation:\n\\[\nI_D=\\frac12 k_n'\\left(\\frac WL\\right)_1 (V_{in}-V_{out}-V_{th})^2\n\\]\nso the DC output voltage is\n\\[\nV_{out}=V_{in}-V_{th}-\\sqrt{\\frac{2I_D}{k_n'(W/L)_1}}\n\\]\n\nM1 saturation requires:\n\\[\nV_{DD}-V_{out}>V_{GS1}-V_{th}\n\\]\n\n---\n\n### 2. Small-signal analysis\n\nLet\n\\[\ng_{m1}=\\sqrt{2k_n'(W/L)_1 I_D}\n\\]\nand\n\\[\nr_{o1}=\\frac{1}{\\lambda I_D},\\qquad r_{o2}=\\frac{1}{\\lambda I_D}\n\\]\nfor M1 and M2, respectively. M2’s gate is AC ground, so it only contributes its output resistance \\(r_{o2}\\).\n\nThe small-signal voltage gain is\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\\frac{g_{m1}}{g_{m1}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}}\n\\]\n\nSince usually \\(g_{m1}\\gg 1/r_{o1},1/r_{o2}\\),\n\\[\nA_v\\approx 1\n\\]\nbut slightly less than 1. The gain is **positive**, so the output follows the input.\n\nThe output resistance is\n\\[\nR_{out}=\\frac{1}{g_{m1}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}}\n\\approx \\frac{1}{g_{m1}}\n\\]\n\nInput resistance is ideally infinite.\n\n---\n\n### 3. Key conclusions\n\n- This is a **voltage follower**: \\(V_{out}\\) tracks \\(V_{in}\\) with a level shift \\(V_{GS1}\\).\n- Voltage gain is close to unity, but less than 1.\n- Output resistance is low, approximately \\(1/g_{m1}\\).\n- M2 acts as a current-source load, providing a high output resistance \\(r_{o2}\\) and stable bias current.\n- If body effect is included, replace \\(g_{m1}\\) with \\(g_{m1}+g_{mb1}\\) in the gain and output-resistance expressions.",
        "format": "markdown",
        "sha256": "3ca892188a8d23ab9832c03cbbf74facdd55f3cdd5f6c7ec7c0084dd6a51d401"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, with positive gain slightly below unity. The body-effect and output-resistance refinements are consistent with the golden solution.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 629,
        "output_tokens": 23079,
        "total_tokens": 23708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 629,
        "output_tokens": 23079,
        "total_tokens": 23708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **complementary MOS (CMOS) inverter** (a basic logic **NOT gate**).\n\n- Bottom device \\(M_1\\): enhancement-mode **nMOS** with source grounded.\n- Top device \\(M_2\\): enhancement-mode **pMOS** with source connected to \\(V_{DD}\\).\n- Both gates are driven by \\(V_{\\rm in}\\); their drains are tied together to form \\(V_{\\rm out}\\).\n\n### Logic operation\nFor valid logic levels:\n\n| \\(V_{\\rm in}\\) | \\(M_1\\) | \\(M_2\\) | \\(V_{\\rm out}\\) |\n|---|---|---|---|\n| Low, \\( \\approx 0\\) | OFF | ON | High, \\(\\approx V_{DD}\\) |\n| High, \\( \\approx V_{DD}\\) | ON | OFF | Low, \\(\\approx 0\\) |\n\nThus,\n\\[\nV_{\\rm out}= \\overline{V_{\\rm in}},\n\\]\nand the Boolean output is\n\\[\nY=\\bar{A}.\n\\]\n\nMore precisely:\n- \\(V_{\\rm in}<V_{TN}\\): \\(M_1\\) is cut off; \\(M_2\\) pulls the output to \\(V_{DD}\\).\n- \\(V_{\\rm in}>V_{DD}-|V_{TP}|\\): \\(M_2\\) is cut off; \\(M_1\\) pulls the output to ground.\n- For \\(V_{TN}<V_{\\rm in}<V_{DD}-|V_{TP}|\\), both transistors can conduct. During switching the output changes rapidly from near \\(V_{DD}\\) to near \\(0\\).\n\n### Transfer characteristic and switching threshold\nThe output is rail-to-rail:\n\\[\nV_{OH}\\approx V_{DD},\\qquad V_{OL}\\approx 0.\n\\]\nThe transition region is very steep. At the switching point \\(V_{\\rm in}=V_{\\rm out}=V_M\\), with both transistors approximately in saturation:\n\\[\n\\frac{k_n}{2}(V_M-V_{TN})^2\n=\n\\frac{k_p}{2}(V_{DD}-V_M-|V_{TP}|)^2,\n\\]\nwhere \\(k=\\mu C_{ox}W/L\\).\n\nTherefore,\n\\[\nV_M=\n\\frac{V_{TN}+\\sqrt{\\frac{k_p}{k_n}}\\left(V_{DD}-|V_{TP}|\\right)}\n{1+\\sqrt{\\frac{k_p}{k_n}}}.\n\\]\nFor a symmetric inverter, \\(k_n=k_p\\) and \\(V_{TN}=|V_{TP}|\\), giving\n\\[\nV_M=\\frac{V_{DD}}{2}.\n\\]\nIn practice, pMOS devices are often made wider than nMOS devices to compensate for lower hole mobility and make \\(k_n\\approx k_p\\).\n\n### Current and power\n- In steady valid logic states, one transistor is OFF, so ideally **no static current** flows. Only leakage current is present.\n- During switching, briefly both transistors are ON, causing a short-circuit/crowbar current from \\(V_{DD}\\) to ground.\n- The load capacitance is charged and discharged every transition, giving dynamic power approximately\n\\[\nP_{\\rm dyn}\\approx \\alpha C_L V_{DD}^2 f+P_{\\rm short}+P_{\\rm leakage},\n\\]\nwhere \\(\\alpha\\) is the switching activity.\n- Holding \\(V_{\\rm in}\\) at an intermediate voltage is undesirable because both devices conduct, producing large static power.\n\n### Use as an analog amplifier\nIf biased near \\(V_{\\rm in}=V_M\\), both transistors are in saturation and the circuit behaves as an inverting small-signal amplifier:\n\\[\nA_v\\approx -(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2}),\n\\]\nbut the gain is nonlinear and very sensitive to bias, so it is mainly used as a digital inverter or as a simple high-gain analog stage.\n\nIn summary, the circuit is a CMOS inverter: \\(V_{\\rm out}=V_{DD}\\) when \\(V_{\\rm in}\\) is low, and \\(V_{\\rm out}=0\\) when \\(V_{\\rm in}\\) is high, with low static power and rail-to-rail output.",
        "format": "markdown",
        "sha256": "a3abd05e3c3c56a08c69e3b1505dd030337b1ed896e19aac1e4b89254f3e5804"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, and complementary operation. The additional transfer-characteristic, current, and amplifier analysis is consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 233,
        "output_tokens": 7012,
        "total_tokens": 7245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6143,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 233,
        "output_tokens": 7012,
        "total_tokens": 7245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6143,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** made of a complementary pair: an upper p-channel MOSFET \\(M_2\\) and a lower n-channel MOSFET \\(M_1\\).\n\n- \\(M_2\\): pMOS pull-up device; source at \\(V_{DD}\\), drain at \\(V_{\\rm out}\\), gate at \\(V_{\\rm in}\\).\n- \\(M_1\\): nMOS pull-down device; source at ground, drain at \\(V_{\\rm out}\\), gate at \\(V_{\\rm in}\\).\n- Both gates are tied together, so the output is the logic inversion of the input.\n\n### Basic operation\n\n| \\(V_{\\rm in}\\) | \\(M_1\\) nMOS | \\(M_2\\) pMOS | \\(V_{\\rm out}\\) |\n|---|---|---|---|\n| Low, \\(0\\) | OFF | ON | High, \\(V_{DD}\\) |\n| High, \\(V_{DD}\\) | ON | OFF | Low, \\(0\\) |\n| Intermediate | may conduct | may conduct | transition; large current possible |\n\nThus:\n- \\(V_{\\rm in}=0\\): \\(M_1\\) is cut off; \\(M_2\\) pulls \\(V_{\\rm out}\\) to \\(V_{DD}\\).\n- \\(V_{\\rm in}=V_{DD}\\): \\(M_2\\) is cut off; \\(M_1\\) pulls \\(V_{\\rm out}\\) to ground.\n- In a steady logic state, ideally **no direct path** exists from \\(V_{DD}\\) to ground, so static power is almost zero except for leakage.\n- During switching, both transistors can be on briefly, producing a short-circuit current. This is one reason CMOS power increases with switching frequency.\n\n### Voltage-transfer characteristic\n\nFor an ideal long-channel CMOS inverter, the VTC has five regions:\n\n1. \\(V_{\\rm in}<V_{Tn}\\): \\(M_1\\) OFF, \\(M_2\\) ON; \\(V_{\\rm out}\\approx V_{DD}\\).\n2. Lower transition: \\(M_1\\) in saturation, \\(M_2\\) in linear region; output begins to fall.\n3. Near the switching threshold: both transistors are in saturation; the VTC is steep, giving high voltage gain.\n4. Upper transition: \\(M_1\\) in linear region, \\(M_2\\) in saturation; output is almost low.\n5. \\(V_{\\rm in}>V_{DD}-|V_{Tp}|\\): \\(M_2\\) OFF, \\(M_1\\) ON; \\(V_{\\rm out}\\approx0\\).\n\nThe switching threshold \\(V_M\\) is found by equating the saturation currents of the two devices near \\(V_{\\rm out}=V_{\\rm in}=V_M\\):\n\n\\[\nV_M=\n\\frac{V_{DD}-|V_{Tp}|+\\sqrt{k_n/k_p}\\,V_{Tn}}\n{1+\\sqrt{k_n/k_p}},\n\\]\n\nwhere\n\n\\[\nk_n=\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_n,\\qquad\nk_p=\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_p .\n\\]\n\nFor a symmetric inverter,\n\n\\[\nk_n=k_p,\\qquad V_{Tn}=|V_{Tp}|,\n\\]\n\nso\n\n\\[\nV_M\\approx \\frac{V_{DD}}{2}.\n\\]\n\nBecause electron mobility is usually larger than hole mobility, the pMOS is often made wider, roughly\n\n\\[\n\\left(\\frac{W}{L}\\right)_p \\approx\n\\frac{\\mu_n}{\\mu_p}\\left(\\frac{W}{L}\\right)_n,\n\\]\n\nto obtain a symmetric switching characteristic.\n\n### Logic levels and noise margins\n\nIdeally, with no load:\n\n\\[\nV_{OH}=V_{DD},\\qquad V_{OL}=0.\n\\]\n\nNoise margins are:\n\n\\[\nNM_H=V_{OH}-V_{IH},\\qquad\nNM_L=V_{IL}-V_{OL},\n\\]\n\nwhere \\(V_{IL}\\) and \\(V_{IH}\\) are the points where the VTC slope is \\(-1\\). A well-designed symmetric CMOS inverter gives near rail-to-rail output swing and large noise margins.\n\n### Dynamic and power behavior\n\nThe input looks capacitive and has very high DC input resistance. The load capacitance is charged through \\(M_2\\) and discharged through \\(M_1\\). The average dynamic power is approximately\n\n\\[\nP_{\\rm dyn}\\approx \\alpha C_L V_{DD}^2 f,\n\\]\n\nwhere \\(\\alpha\\) is the switching activity factor, plus short-circuit and leakage power.\n\n### Small-signal use\n\nIf biased near \\(V_M\\), both transistors are in saturation and the circuit behaves as an inverting amplifier with gain approximately\n\n\\[\nA_v \\approx -(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2}).\n\\]\n\nSo, overall, the circuit is a **CMOS logic inverter** with rail-to-rail output, high input impedance, low static power, and a sharp inverting voltage-transfer characteristic.",
        "format": "markdown",
        "sha256": "c9e11a1f70f1c662fe560164f263ac6bc8ad862752d9e3be942ea6d9c988c934"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its PMOS pull-up and NMOS pull-down, with correct operation. The additional VTC, power, and small-signal analysis is consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 233,
        "output_tokens": 8632,
        "total_tokens": 8865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7589,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 233,
        "output_tokens": 8632,
        "total_tokens": 8865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7589,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**: a p-channel MOSFET \\(M_2\\) as the pull-up device and an n-channel MOSFET \\(M_1\\) as the pull-down device. Both gates are connected to the input \\(V_{\\text{in}}\\), and both drains are connected to the output \\(V_{\\text{out}}\\).\n\n### Logic operation\n\n| \\(V_{\\text{in}}\\) | \\(M_2\\) (PMOS) | \\(M_1\\) (NMOS) | \\(V_{\\text{out}}\\) |\n|---|---|---|---|\n| 0 (low) | ON | OFF | \\(V_{DD}\\) (high) |\n| 1 (high) | OFF | ON | 0 (low) |\n\n- **When \\(V_{\\text{in}}=0\\):**  \n  \\(M_1\\) has \\(V_{GS}=0\\), so it is OFF.  \n  \\(M_2\\) has \\(V_{GS}=-V_{DD}\\), so it is ON and pulls \\(V_{\\text{out}}\\) up to \\(V_{DD}\\).  \n  Therefore, \\(V_{\\text{out}}=V_{DD}\\), logic 1.\n\n- **When \\(V_{\\text{in}}=V_{DD}\\):**  \n  \\(M_2\\) has \\(V_{GS}=0\\), so it is OFF.  \n  \\(M_1\\) has \\(V_{GS}=V_{DD}\\), so it is ON and pulls \\(V_{\\text{out}}\\) down to ground.  \n  Therefore, \\(V_{\\text{out}}=0\\), logic 0.\n\nThus,\n\\[\nV_{\\text{out}}=\\overline{V_{\\text{in}}}\n\\]\nso the circuit implements a logical inverter.\n\n### Transition region and power\n\nFor intermediate input voltages, both transistors may momentarily conduct if\n\\[\nV_{Tn}<V_{\\text{in}}<V_{DD}-|V_{Tp}|\n\\]\ncausing a short-circuit or “crowbar” current from \\(V_{DD}\\) to ground during switching. This contributes to dynamic power dissipation.\n\nFor steady logic 0 or logic 1 inputs, one transistor is ON and the other is OFF, so ideally there is **no static current** and **no static power dissipation**, except for small leakage currents.\n\n### Voltage transfer characteristic\n\nThe inverter has a high-gain inverting voltage-transfer characteristic. The switching threshold \\(V_M\\) can be adjusted by transistor sizing. If\n\\[\n\\beta_n=\\mu_n C_{ox}\\frac{W_n}{L_n},\\qquad\n\\beta_p=\\mu_p C_{ox}\\frac{W_p}{L_p}\n\\]\nand \\(\\beta_n=\\beta_p\\), then \\(V_M\\approx V_{DD}/2\\). In practice, because electron mobility \\(\\mu_n\\) is larger than hole mobility \\(\\mu_p\\), the PMOS is usually made wider, often \\(W_p/W_n \\approx 2\\text{–}3\\), to achieve symmetric switching.\n\n### Key characteristics\n\n- Logic function: inverter, \\(V_{\\text{out}}=\\overline{V_{\\text{in}}}\\)\n- Rail-to-rail output swing: \\(0\\) to \\(V_{DD}\\)\n- High input impedance: MOSFET gates draw almost no DC gate current\n- Low output impedance in steady states: output is tied to \\(V_{DD}\\) or ground through an ON transistor\n- Very low static power consumption\n- Basic building block of CMOS digital logic circuits\n\nThe body terminals are not shown explicitly; in a standard CMOS process, the PMOS body would be tied to \\(V_{DD}\\) and the NMOS body to ground to avoid body-effect and parasitic conduction issues.",
        "format": "markdown",
        "sha256": "234c1ede6784879ea335634eedcbc8e6e29849261b982332560b30aa17b93023"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with a PMOS pull-up and NMOS pull-down, and describes its inverting operation accurately. The additional analysis is not needed for full credit and contains no contradiction of the inverter's operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 233,
        "output_tokens": 5188,
        "total_tokens": 5421,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3954,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 233,
        "output_tokens": 5188,
        "total_tokens": 5421,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3954,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** (complementary MOS inverter). It consists of:\n\n- **M₁**: p-channel MOSFET (pull-up device) connected between \\(V_{DD}\\) and \\(V_{out}\\)\n- **M₂**: n-channel MOSFET (pull-down device) connected between \\(V_{out}\\) and ground\n- Both gates are driven by \\(V_{in}\\), and the output is taken from the common drain node.\n\n## 1. Basic operation\n\n| Input \\(V_{in}\\) | M₁ (pMOS) | M₂ (nMOS) | Output \\(V_{out}\\) |\n|---|---|---|---|\n| \\(0\\) V (logic LOW) | ON | OFF | \\(V_{DD}\\) (logic HIGH) |\n| \\(V_{DD}\\) (logic HIGH) | OFF | ON | \\(0\\) V (logic LOW) |\n\nSo the circuit performs logic inversion:\n\n\\[\nV_{out} = \\overline{V_{in}}\n\\]\n\nWhen the input is steady at either logic level, one transistor is OFF, so there is ideally **no direct path from \\(V_{DD}\\) to ground**. Only leakage current flows, giving very low static power dissipation.\n\n## 2. Voltage transfer characteristic (VTC)\n\nAs \\(V_{in}\\) is swept from 0 to \\(V_{DD}\\), the inverter operates in several regions:\n\n1. **\\(V_{in} < V_{tn}\\)**  \n   M₂ is OFF, M₁ is ON.  \n   \\[\n   V_{out} \\approx V_{DD}\n   \\]\n\n2. **\\(V_{tn} < V_{in} < V_M\\)**  \n   M₂ is in saturation, M₁ is in the linear/triode region.  \n   \\(V_{out}\\) begins to fall.\n\n3. **\\(V_{in} \\approx V_M\\)**  \n   Both transistors are in saturation, and the inverter has maximum gain. This is the switching threshold.\n\n4. **\\(V_M < V_{in} < V_{DD}-|V_{tp}|\\)**  \n   M₂ is in the linear region, M₁ is in saturation.  \n   \\(V_{out}\\) falls further toward 0 V.\n\n5. **\\(V_{in} > V_{DD}-|V_{tp}|\\)**  \n   M₁ is OFF, M₂ is ON.  \n   \\[\n   V_{out} \\approx 0\\text{ V}\n   \\]\n\nThe switching threshold \\(V_M\\) is found by equating the saturation currents of M₁ and M₂:\n\n\\[\n\\frac12 k_n(V_M-V_{tn})^2\n=\n\\frac12 k_p(V_{DD}-V_M-|V_{tp}|)^2\n\\]\n\n\\[\nV_M=\n\\frac{V_{DD}-|V_{tp}|+\\sqrt{k_n/k_p}\\,V_{tn}}\n{1+\\sqrt{k_n/k_p}}\n\\]\n\nwhere\n\n\\[\nk_n=\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_n,\\qquad\nk_p=\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_p\n\\]\n\nFor a symmetric inverter with \\(k_n=k_p\\) and \\(V_{tn}=|V_{tp}|\\),\n\n\\[\nV_M=\\frac{V_{DD}}{2}\n\\]\n\n## 3. Power dissipation\n\n- **Static power**: ideally zero, except for leakage:\n  \\[\n  P_{\\text{static}} \\approx I_{\\text{leak}}V_{DD}\n  \\]\n- **Dynamic power** when driving a load capacitance \\(C_L\\):\n  \\[\n  P_{\\text{dyn}} \\approx \\alpha C_L V_{DD}^2 f\n  \\]\n- **Short-circuit power** occurs briefly during switching when both M₁ and M₂ conduct simultaneously.\n\n## 4. Key advantages\n\n- Rail-to-rail output swing: \\(V_{out}\\) goes from 0 V to \\(V_{DD}\\)\n- Very low static power dissipation\n- High input impedance because gates are MOS gates\n- High noise margins\n- Standard building block of CMOS digital logic\n\n## 5. Main non-idealities\n\n- Short-circuit current during input transitions\n- Speed limited by charging/discharging of load capacitance\n- Body effect, channel-length modulation, and process variations affect the actual VTC\n- Latch-up can occur in bulk CMOS if not properly guarded\n\nIn summary, the circuit is a **CMOS inverter**: a pMOS pull-up and an nMOS pull-down driven by the same input. It produces a full logic swing, dissipates significant power only during switching, and is the fundamental gate of CMOS digital integrated circuits.",
        "format": "markdown",
        "sha256": "eeff44cfeb15d8e8ff9cf46fa87ea608a18e1a5060921158b72afe41e3995974"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M₁ as a pMOS and analyzes the circuit as an ordinary CMOS inverter. The golden solution requires recognizing that both devices are NMOS; this topology error requires a score of 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 245,
        "output_tokens": 8515,
        "total_tokens": 8760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6330,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 245,
        "output_tokens": 8515,
        "total_tokens": 8760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6330,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** — the basic building block of CMOS digital logic.\n\n### 1. Transistor roles\n- **M₁**: p-channel MOSFET (**PMOS**), acts as the **pull-up** device.  \n  Source is connected to \\(V_{DD}\\), drain to \\(V_{out}\\), gate to \\(V_{in}\\).\n- **M₂**: n-channel MOSFET (**NMOS**), acts as the **pull-down** device.  \n  Source is connected to ground, drain to \\(V_{out}\\), gate to \\(V_{in}\\).\n\nBoth gates are tied together, so the same input drives both transistors; the output is taken from the common drain node.\n\n### 2. Logic operation\n\n| \\(V_{in}\\) | M₁ PMOS | M₂ NMOS | \\(V_{out}\\) |\n|---|---|---|---|\n| 0 | ON | OFF | \\(V_{DD}\\) (logic 1) |\n| \\(V_{DD}\\) | OFF | ON | 0 (logic 0) |\n\nThus,\n\\[\nV_{out} = \\overline{V_{in}}\n\\]\nso the circuit functions as an inverter.\n\n### 3. DC operating regions\nLet \\(V_{TN}>0\\) be the NMOS threshold voltage and \\(V_{TP}<0\\) be the PMOS threshold voltage.\n\n- **M₂ NMOS** turns on when:\n  \\[\n  V_{in} > V_{TN}\n  \\]\n- **M₁ PMOS** turns on when:\n  \\[\n  V_{in} < V_{DD}-|V_{TP}|\n  \\]\n\nTherefore:\n- For \\(V_{in} < V_{TN}\\): NMOS is off, PMOS is on → output is pulled to \\(V_{DD}\\).\n- For \\(V_{in} > V_{DD}-|V_{TP}|\\): PMOS is off, NMOS is on → output is pulled to 0.\n- For \\(V_{TN} < V_{in} < V_{DD}-|V_{TP}|\\): both transistors may be on; the output transitions between high and low. This is the high-gain transition region of the inverter.\n\n### 4. Voltage transfer characteristic\nAt the switching threshold \\(V_M\\), both transistors are in saturation, and their currents are equal. Using the long-channel square-law model:\n\\[\nI_{DN}=\\frac{\\beta_n}{2}(V_M-V_{TN})^2\n\\]\n\\[\nI_{DP}=\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{TP}|)^2\n\\]\nSetting \\(I_{DN}=I_{DP}\\):\n\\[\nV_M=\n\\frac{V_{TN}+\\sqrt{\\frac{\\beta_p}{\\beta_n}}\\left(V_{DD}-|V_{TP}|\\right)}\n{1+\\sqrt{\\frac{\\beta_p}{\\beta_n}}}\n\\]\nwhere\n\\[\n\\beta_n=\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_n,\\qquad\n\\beta_p=\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_p\n\\]\nFor a symmetric inverter, \\(\\beta_n=\\beta_p\\) and \\(V_{TN}=|V_{TP}|\\), giving\n\\[\nV_M \\approx \\frac{V_{DD}}{2}\n\\]\n\n### 5. Power and delay\n- **Static power** is ideally very low: when the input is steady at 0 or \\(V_{DD}\\), one transistor is off, so no direct DC path exists from \\(V_{DD}\\) to ground.\n- **Dynamic power** is consumed mainly when charging/discharging the output load capacitance:\n  \\[\n  P_{dyn}=\\alpha C_L V_{DD}^2 f\n  \\]\n  where \\(\\alpha\\) is the switching activity factor and \\(f\\) is the clock frequency.\n- During switching, both transistors are momentarily on, causing a short-circuit current. Propagation delay depends on the NMOS/PMOS current drive strengths and the load capacitance.\n\n### Summary\nThe circuit is a **CMOS inverter**. It produces a rail-to-rail output, has low static power dissipation, and is widely used as a logic inverter and as the fundamental gate in CMOS digital circuits such as NAND, NOR, and more complex logic gates.",
        "format": "markdown",
        "sha256": "6158b8be53ecdbc694f88d0f17b8f2585b6b502a3d43ecde695c87a39fad2804"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M₁ as PMOS and analyzes the circuit as an ordinary CMOS inverter. Both devices are NMOS, so the required device-identification rule assigns 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 245,
        "output_tokens": 7866,
        "total_tokens": 8111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 245,
        "output_tokens": 7866,
        "total_tokens": 8111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** (complementary MOS inverter).\n\n### Device identification\n- **M₁**: p-channel MOSFET (PMOS), used as the **pull-up** transistor.  \n  Source connected to \\(V_{DD}\\), drain connected to \\(V_{out}\\), gate connected to \\(V_{in}\\).\n- **M₂**: n-channel MOSFET (NMOS), used as the **pull-down** transistor.  \n  Source connected to ground, drain connected to \\(V_{out}\\), gate connected to \\(V_{in}\\).\n\nThus the output is taken from the common drain node, and the input drives both gates.\n\n### Operation\n| \\(V_{in}\\) | M₁ (PMOS) | M₂ (NMOS) | \\(V_{out}\\) |\n|---|---|---|---|\n| Low, \\(0\\) V | ON | OFF | High, \\(V_{DD}\\) |\n| High, \\(V_{DD}\\) | OFF | ON | Low, \\(0\\) V |\n\n- **When \\(V_{in}=0\\):**  \n  For NMOS M₂, \\(V_{GS2}=0<V_{TN}\\), so M₂ is OFF.  \n  For PMOS M₁, \\(V_{SG1}=V_{DD}>|V_{TP}|\\), so M₁ is ON.  \n  Therefore \\(V_{out}\\) is pulled to \\(V_{DD}\\):  \n  \\[\n  V_{out}=V_{DD}\n  \\]\n\n- **When \\(V_{in}=V_{DD}\\):**  \n  For NMOS M₂, \\(V_{GS2}=V_{DD}>V_{TN}\\), so M₂ is ON.  \n  For PMOS M₁, \\(V_{SG1}=0< |V_{TP}|\\), so M₁ is OFF.  \n  Therefore \\(V_{out}\\) is pulled to ground:  \n  \\[\n  V_{out}=0\n  \\]\n\n### Logic function\n\\[\nV_{out}=\\overline{V_{in}}\n\\]\nso the circuit acts as a digital **inverter**.\n\n### Voltage transfer characteristic\n- For \\(V_{in}<V_{TN}\\), M₂ is off, M₁ is on, and \\(V_{out}\\approx V_{DD}\\).\n- For \\(V_{in}>V_{DD}-|V_{TP}|\\), M₁ is off, M₂ is on, and \\(V_{out}\\approx 0\\).\n- In the transition region, both transistors may conduct, giving a steep high-gain output transition.\n\nThe switching threshold \\(V_M\\) (where \\(V_{in}=V_{out}\\)) can be found by equating the NMOS and PMOS currents in saturation:\n\\[\n\\frac12 \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_n(V_M-V_{TN})^2\n=\n\\frac12 \\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_p(V_{DD}-V_M-|V_{TP}|)^2\n\\]\nIf the inverter is designed symmetrically, \\(V_M\\approx V_{DD}/2\\).\n\n### Key points\n- In steady state, one transistor is always OFF, so static power dissipation is ideally almost zero except for leakage.\n- During switching, both transistors can be momentarily ON, causing a crowbar current from \\(V_{DD}\\) to ground.\n- The output swings nearly rail-to-rail from \\(0\\) to \\(V_{DD}\\), making it suitable for digital logic.",
        "format": "markdown",
        "sha256": "21e7a10a01df4607242c848a2d49a74a65a4d10322a84c09583c1a73bf2b3e7e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M₁ as PMOS and analyzes the circuit as a conventional CMOS inverter. Both devices are NMOS, so this violates the non-negotiable scoring gate.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 245,
        "output_tokens": 5566,
        "total_tokens": 5811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 245,
        "output_tokens": 5566,
        "total_tokens": 5811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-source amplifier with a diode-connected PMOS active load**.\n\n## 1. Device roles\n\n- **\\(M_1\\)**: NMOS driver  \n  - Source grounded  \n  - Gate = \\(V_{\\text{in}}\\)  \n  - Drain = \\(V_{\\text{out}}\\)\n\n- **\\(M_2\\)**: PMOS load  \n  - Source = \\(V_{DD}\\)  \n  - Drain = \\(V_{\\text{out}}\\)  \n  - Gate tied to drain, so \\(M_2\\) is **diode-connected**\n\nBecause \\(M_2\\) is diode-connected, it operates in saturation as long as it is on, and it behaves as a small-signal resistance rather than a high-impedance current source.\n\n## 2. DC analysis\n\nLet  \n\\[\nK_n=\\mu_n C_{ox}\\left(\\frac WL\\right)_1,\\qquad\nK_p=\\mu_p C_{ox}\\left(\\frac WL\\right)_2\n\\]\nand let \\(V_{TN}>0\\), \\(|V_{TP}|>0\\).\n\nAt the output node, KCL gives\n\\[\nI_{D1}=I_{D2}\n\\]\n\nIf both transistors are in saturation:\n\\[\nI_{D1}=\\frac12K_n(V_{\\text{in}}-V_{TN})^2\n\\]\n\\[\nI_{D2}=\\frac12K_p(V_{DD}-V_{\\text{out}}-|V_{TP}|)^2\n\\]\nEquating:\n\\[\n\\frac12K_n(V_{\\text{in}}-V_{TN})^2\n=\n\\frac12K_p(V_{DD}-V_{\\text{out}}-|V_{TP}|)^2\n\\]\nTherefore:\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}-|V_{TP}|\n-\n\\sqrt{\\frac{K_n}{K_p}}\\,(V_{\\text{in}}-V_{TN})\n}\n\\]\n\nThis is valid while \\(M_1\\) is in saturation:\n\\[\nV_{\\text{out}}\\ge V_{\\text{in}}-V_{TN}\n\\]\n\nIf \\(V_{\\text{in}}<V_{TN}\\), \\(M_1\\) is off and\n\\[\nV_{\\text{out}}\\approx V_{DD}-|V_{TP}|\n\\]\n\nIf \\(V_{\\text{in}}\\) is large enough, \\(M_1\\) enters the triode region and the output falls toward a low voltage determined by the \\(K_n/K_p\\) ratio and \\(V_{\\text{in}}\\).\n\n## 3. Small-signal analysis\n\nFor small-signal operation, replace:\n- \\(M_1\\) by a transconductance \\(g_{m1}\\) and output resistance \\(r_{o1}\\)\n- \\(M_2\\) by its diode-connected small-signal resistance:\n\\[\nR_{M2}=r_{o2}\\parallel \\frac{1}{g_{m2}}\n\\]\n\nThus the output resistance is\n\\[\n\\boxed{\nR_{\\text{out}}\n=\nr_{o1}\\parallel r_{o2}\\parallel \\frac{1}{g_{m2}}\n}\n\\]\n\nThe small-signal voltage gain is\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n-g_{m1}\n\\left(\nr_{o1}\\parallel r_{o2}\\parallel \\frac{1}{g_{m2}}\n\\right)\n}\n\\]\n\nIf \\(r_{o1},r_{o2}\\) are large compared with \\(1/g_{m2}\\), then\n\\[\n\\boxed{\nA_v\\approx -\\frac{g_{m1}}{g_{m2}}\n}\n\\]\nand with square-law operation,\n\\[\n\\boxed{\nA_v\\approx\n-\\sqrt{\n\\frac{\\mu_n C_{ox}(W/L)_1}\n{\\mu_p C_{ox}(W/L)_2}\n}\n}\n\\]\n\n## 4. Conclusion\n\n- The circuit is an **inverting amplifier**.\n- \\(M_2\\) acts as a **diode-connected PMOS load**, giving a relatively low small-signal load resistance \\(1/g_{m2}\\).\n- The gain is moderate and approximately set by the \\(g_{m1}/g_{m2}\\) ratio.\n- \\(M_2\\) remains in saturation whenever it is on because \\(V_{SD}=V_{SG}\\), so the diode connection forces saturation.\n- The output swing is limited; the high output level is approximately \\(V_{DD}-|V_{TP}|\\), not \\(V_{DD}\\).",
        "format": "markdown",
        "sha256": "ccf1130b6c0721922c2bb675e955eeb937c95c53f17b9850d5f02e63bfa7a5f7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation treated consistently. The additional DC discussion does not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 395,
        "output_tokens": 10141,
        "total_tokens": 10536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9187,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 395,
        "output_tokens": 10141,
        "total_tokens": 10536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9187,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **active-load MOS inverter**—essentially a ratioed NMOS inverter. The lower transistor \\(M_1\\) is the switching driver; the upper transistor \\(M_2\\) is the pull-up load.\n\nAssuming the usual depletion-load interpretation of the symbol, \\(M_2\\) is a **depletion-mode nMOS** whose gate is tied to its source, so  \n\\[\nV_{GS2}=0.\n\\]\nBecause \\(M_2\\) is depletion type, \\(V_{T2}= -V_L<0\\), so it remains on even with \\(V_{GS2}=0\\). It therefore acts as a pull-up current source.\n\n## Logic operation\n\\[\nV_{\\rm out}=\\overline{V_{\\rm in}}\n\\]\nso the circuit is an inverter.\n\n- **\\(V_{\\rm in}\\) low:**  \n  \\(M_1\\) is off. \\(M_2\\) charges the output toward \\(V_{DD}\\).  \n  Ideal:\n  \\[\n  V_{OH}\\approx V_{DD},\\qquad I_{DD}\\approx 0\n  \\]\n  (ignoring leakage). Output = logic 1.\n\n- **\\(V_{\\rm in}\\) high:**  \n  \\(M_1\\) turns on and pulls the output low while \\(M_2\\) still supplies current. The output low level is set by the ratio of the transistor strengths:\n  \\[\n  V_{OL}>0.\n  \\]\n  Both devices conduct, so there is static current from \\(V_{DD}\\) to ground and the circuit dissipates static power in the low-output state.\n\n## Quantitative DC behavior\nLet\n\\[\nK_1=\\mu_n C_{\\rm ox}\\left(\\frac{W}{L}\\right)_1,\\qquad\nK_2=\\mu_n C_{\\rm ox}\\left(\\frac{W}{L}\\right)_2,\n\\]\n\\[\nV_{T1}=V_{TN}>0,\\qquad V_{T2}=-V_L,\\quad V_L>0.\n\\]\n\nFor \\(M_1\\):\n\\[\nI_{D1}=\n\\begin{cases}\n0, & V_{in}\\le V_{TN},\\\\[4pt]\n\\frac12K_1(V_{in}-V_{TN})^2, & V_{out}\\ge V_{in}-V_{TN},\\\\[4pt]\nK_1[(V_{in}-V_{TN})V_{out}-\\frac12 V_{out}^2],\n& V_{out}<V_{in}-V_{TN}.\n\\end{cases}\n\\]\n\nFor the load \\(M_2\\):\n\\[\nV_{DS2}=V_{DD}-V_{out},\\qquad V_{GS2}=0.\n\\]\nIt is in saturation when\n\\[\nV_{out}\\le V_{DD}-V_L,\n\\]\ngiving\n\\[\nI_{D2}=\\frac12 K_2 V_L^2.\n\\]\nWhen\n\\[\nV_{out}>V_{DD}-V_L,\n\\]\nit is in the triode region:\n\\[\nI_{D2}=K_2\\left[V_L(V_{DD}-V_{out})\n-\\frac12(V_{DD}-V_{out})^2\\right].\n\\]\nThe operating point is found from\n\\[\nI_{D1}=I_{D2}.\n\\]\n\n### Approximate low output\nFor \\(V_{in}=V_{DD}\\), \\(M_1\\) is deep in triode and \\(M_2\\) is in saturation:\n\\[\nK_1\\left[(V_{DD}-V_{TN})V_{OL}\n-\\frac12V_{OL}^2\\right]\n\\approx \\frac12 K_2 V_L^2.\n\\]\nFor small \\(V_{OL}\\):\n\\[\nV_{OL}\\approx\n\\frac{K_2 V_L^2}{2K_1(V_{DD}-V_{TN})}.\n\\]\nThus a stronger driver \\(M_1\\) or a weaker load \\(M_2\\) gives a lower \\(V_{OL}\\).\n\n### Switching threshold\nAt the steep part of the transfer characteristic, with both transistors in saturation approximately,\n\\[\n\\frac12K_1(V_M-V_{TN})^2\n=\n\\frac12K_2 V_L^2,\n\\]\nso\n\\[\n\\boxed{V_M=V_{TN}+V_L\\sqrt{\\frac{K_2}{K_1}}.}\n\\]\nFor a symmetric inverter with \\(V_M\\approx V_{DD}/2\\), choose\n\\[\n\\frac{K_2}{K_1}\n\\approx\n\\left(\\frac{V_{DD}/2-V_{TN}}{V_L}\\right)^2.\n\\]\n\n## Transfer characteristic\n- \\(V_{in}<V_{TN}\\): \\(M_1\\) cutoff, \\(V_{out}\\approx V_{DD}\\).\n- As \\(V_{in}\\) rises above \\(V_{TN}\\), \\(M_1\\) conducts; output falls. Near the high-output region, \\(M_1\\) is saturated and \\(M_2\\) is linear.\n- Around \\(V_M\\), the output changes rapidly.\n- At larger \\(V_{in}\\), \\(M_1\\) is in triode and \\(M_2\\) is in saturation; output approaches \\(V_{OL}\\).\n\nIn practice, channel-length modulation and body effect round the transition; for an nMOS load with grounded body, the body effect makes the depletion load weaker as \\(V_{out}\\) rises.\n\n## Important points\n- The circuit is **inverting**: \\(V_{\\rm out}=\\bar V_{\\rm in}\\).\n- The high level is ideally \\(V_{DD}\\) for a depletion load.\n- The low level is not zero; it is ratio-dependent.\n- Static current flows when the output is low, so this is **ratioed logic** with static power in one state.\n- It is not a complementary CMOS inverter, since both devices are not switched complementarily.\n\nIf your symbol convention instead shows \\(M_2\\) as a diode-connected pMOS load, the same inverter action occurs, but then the high level is reduced:\n\\[\nV_{OH}\\approx V_{DD}-|V_{TP}|,\n\\]\nand the load current is\n\\[\nI_{D2}=\\frac12 K_p\\left(V_{DD}-V_{out}-|V_{TP}|\\right)^2\n\\]\nwhen \\(M_2\\) is on.",
        "format": "markdown",
        "sha256": "5bc8060aad8ab35f9a8802fef237e81665a40b0346302366e344c8642db73107"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The actual load is a diode-connected PMOS, but the answer primarily analyzes a depletion-mode nMOS load with its gate tied to its source. It correctly notes the stage is inverting, but misses the required topology and gain; the brief conditional PMOS remark does not repair the main analysis.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 393,
        "output_tokens": 43369,
        "total_tokens": 43762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42046,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 393,
        "output_tokens": 43369,
        "total_tokens": 43762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42046,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-source amplifier with a diode-connected PMOS active load**.\n\n- **M₁**: NMOS driver, source grounded, gate driven by \\(V_\\text{in}\\), drain at \\(V_\\text{out}\\).\n- **M₂**: PMOS load, source at \\(V_{DD}\\), gate and drain tied together at \\(V_\\text{out}\\) (diode-connected).\n\nAssume both transistors are enhancement-mode, operate in strong inversion, and follow the square-law model. Let\n\\[\nk_n=\\mu_n C_{ox}\\left(\\frac WL\\right)_1,\\qquad\nk_p=\\mu_p C_{ox}\\left(\\frac WL\\right)_2\n\\]\nand let \\(V_{TN}>0\\), \\(|V_{TP}|>0\\).\n\n---\n\n## 1. DC analysis\n\nFor M₂, since \\(V_{SG}=V_{SD}=V_{DD}-V_\\text{out}\\), the saturation condition\n\\[\nV_{SD}\\ge V_{SG}-|V_{TP}|\n\\]\nis always true when M₂ is on. Thus **M₂ is always in saturation** if it conducts.\n\nFor M₁, saturation requires\n\\[\nV_\\text{out}\\ge V_\\text{in}-V_{TN}.\n\\]\n\nEquating the drain currents,\n\\[\n\\frac12 k_n(V_\\text{in}-V_{TN})^2\n=\n\\frac12 k_p(V_{DD}-V_\\text{out}-|V_{TP}|)^2.\n\\]\nSolving for \\(V_\\text{out}\\),\n\\[\n\\boxed{\nV_\\text{out}\n=\nV_{DD}-|V_{TP}|\n-\n\\sqrt{\\frac{k_n}{k_p}}\\,(V_\\text{in}-V_{TN})\n}\n\\]\nprovided M₁ is in saturation:\n\\[\nV_\\text{in}>V_{TN},\\qquad\nV_\\text{out}\\ge V_\\text{in}-V_{TN}.\n\\]\n\nIf \\(V_\\text{in}<V_{TN}\\), M₁ is off, and M₂ charges the output until\n\\[\nV_\\text{out}=V_{DD}-|V_{TP}|\n\\]\nwith no steady current.\n\n---\n\n## 2. Small-signal analysis\n\nThe small-signal parameters are\n\\[\ng_{m1}=\\sqrt{2k_n I_D},\\qquad\ng_{m2}=\\sqrt{2k_p I_D}.\n\\]\nThe diode-connected PMOS M₂ presents a small-signal resistance\n\\[\nR_{L2}=\\frac{1}{g_{m2}}\\parallel r_{o2}\n\\]\nfrom \\(V_\\text{out}\\) to ac ground, where \\(r_{o2}\\) is its output resistance.\n\nIncluding \\(r_{o1}\\) of M₁, the small-signal voltage gain is\n\\[\n\\boxed{\nA_v=\\frac{v_\\text{out}}{v_\\text{in}}\n=\n-g_{m1}\\left(r_{o1}\\parallel r_{o2}\\parallel \\frac{1}{g_{m2}}\\right)\n}\n\\]\nIf channel-length modulation is neglected, \\(r_{o1},r_{o2}\\to\\infty\\), so\n\\[\n\\boxed{\nA_v\\approx -\\frac{g_{m1}}{g_{m2}}\n=\n-\\sqrt{\\frac{k_n}{k_p}}\n=\n-\\sqrt{\\frac{\\mu_n C_{ox}(W/L)_1}{\\mu_p C_{ox}(W/L)_2}}\n}\n\\]\n\nThus the gain magnitude is set mainly by the geometry/mobility ratio, not by bias current.\n\nThe small-signal output resistance is\n\\[\n\\boxed{\nR_\\text{out}\n=\nr_{o1}\\parallel r_{o2}\\parallel \\frac{1}{g_{m2}}\n\\approx \\frac{1}{g_{m2}}\n}\n\\]\nInput resistance is ideally infinite at low frequency because the input is a MOS gate.\n\n---\n\n## Key points\n\n- M₂ acts as a **diode-connected PMOS load**; it is always in saturation when on.\n- M₁ is the amplifying NMOS device; it must remain in saturation for linear amplification.\n- DC output level:\n  \\[\n  V_\\text{out}=V_{DD}-|V_{TP}|-\\sqrt{\\frac{k_n}{k_p}}(V_\\text{in}-V_{TN})\n  \\]\n- Small-signal gain:\n  \\[\n  A_v\\approx -\\sqrt{\\frac{k_n}{k_p}}\n  \\]\n- The stage is inverting and has a relatively low output resistance \\(\\approx 1/g_{m2}\\).",
        "format": "markdown",
        "sha256": "800ea914c02bb765c9c18e495fb7a4fe5b0f7bf3012b3b772aef2b11f93f93d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain both with consistent channel-length modulation and in the ideal limit. The additional DC and resistance analysis is consistent with the stated square-law assumptions.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 393,
        "output_tokens": 12947,
        "total_tokens": 13340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 393,
        "output_tokens": 12947,
        "total_tokens": 13340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **single-stage MOSFET amplifier**: a **common-source stage with a current-source active load**.\n\n## Device roles and connection\n- **\\(M_2\\)**: PMOS input transistor.  \n  - Source connected to \\(V_{DD}\\)\n  - Gate connected to \\(V_{in}\\)\n  - Drain connected to \\(V_{out}\\)\n  - Since its source is at ac ground (\\(V_{DD}\\)), it operates as a **common-source amplifier**.\n\n- **\\(M_1\\)**: NMOS current-source load.  \n  - Drain connected to \\(V_{out}\\)\n  - Source connected to ground\n  - Gate connected to ground/bias  \n  - It sinks a nearly constant bias current and provides a high small-signal output resistance.\n\nSo the input signal is applied to the gate of \\(M_2\\), and the output is taken at the common drain node.\n\n## DC analysis\nFor \\(M_2\\):\n\\[\nV_{SG2}=V_{DD}-V_{in}\n\\]\n\nFor \\(M_1\\), assuming it is biased in saturation as a current source:\n\\[\nI_{D1}=\\frac12 k_{n1}(V_{GS1}-V_{thn})^2(1+\\lambda_n V_{out})\n\\]\n\nFor \\(M_2\\), in saturation:\n\\[\nI_{D2}=\\frac12 k_{p2}(V_{SG2}-|V_{thp}|)^2(1+\\lambda_p(V_{DD}-V_{out}))\n\\]\n\nAt the output node, the currents must match:\n\\[\nI_{D2}=I_{D1}\n\\]\nThis equation determines the dc output voltage \\(V_{out}\\).\n\nFor \\(M_2\\) to be in saturation:\n\\[\nV_{SD2}=V_{DD}-V_{out} > V_{SG2}-|V_{thp}|\n\\]\nor\n\\[\nV_{out}<V_{in}+|V_{thp}|\n\\]\n\nFor \\(M_1\\) to be in saturation:\n\\[\nV_{out}>V_{GS1}-V_{thn}\n\\]\n\nIf \\(M_1\\) is an enhancement-mode NMOS with its gate grounded, it would be off. Therefore, for the circuit to work as an amplifier, \\(M_1\\) must be either a **depletion-mode NMOS** or biased by a suitable gate voltage.\n\n## Small-signal analysis\nLet\n\\[\nR_{out}=r_{o1}\\parallel r_{o2}\n\\]\n\nwhere \\(r_{o1}\\) and \\(r_{o2}\\) are the small-signal output resistances of \\(M_1\\) and \\(M_2\\).\n\nThe small-signal voltage gain is\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx -g_{m2}(r_{o1}\\parallel r_{o2})\n\\]\n\nwhere\n\\[\ng_{m2}=\\sqrt{2k_{p2}I_D}\n\\]\nor\n\\[\ng_{m2}=\\frac{2I_D}{V_{SG2}-|V_{thp}|}\n\\]\n\nThus the circuit is an **inverting voltage amplifier**. An increase in \\(V_{in}\\) reduces \\(V_{SG2}\\), so \\(M_2\\) conducts less current, and the current-source load \\(M_1\\) pulls \\(V_{out}\\) lower.\n\n## Summary\n\\[\n\\boxed{\\text{The circuit is a PMOS common-source amplifier with an NMOS current-source load.}}\n\\]\n\n\\[\n\\boxed{A_v \\approx -g_{m2}(r_{o1}\\parallel r_{o2})}\n\\]\n\n\\[\n\\boxed{R_{out}\\approx r_{o1}\\parallel r_{o2}}\n\\]\n\n\\[\n\\boxed{R_{in}\\approx \\infty}\n\\]\n\nThe output dc level is set by the requirement that the PMOS load current equals the NMOS current-source bias current.",
        "format": "markdown",
        "sha256": "5f40243621dbe41796240544f032260a2c2146dc9b584c034245d0316c3ee709"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M2 as a PMOS common-source input device and gets the qualitative inversion, but misidentifies M1 as an NMOS current-source load. M1 is a diode-connected PMOS load, so the stated bias model and gain formula miss the circuit’s central gm/gm behavior.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 866,
        "output_tokens": 24160,
        "total_tokens": 25026,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 866,
        "output_tokens": 24160,
        "total_tokens": 25026,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a simple two-MOSFET inverting amplifier (or inverter) with an active load.\n\n## Device identification\n- **M₂**: PMOS transistor. Its source is connected to \\(V_{DD}\\), its gate is the input \\(V_{in}\\), and its drain is the output \\(V_{out}\\). It operates as a **common-source amplifier**.\n- **M₁**: NMOS transistor. Its drain is connected to \\(V_{out}\\), its source is grounded, and its gate is also tied to ground (or to its source). Thus \\(V_{GS1}=0\\). For M₁ to conduct, it must be a **depletion-mode NMOS**; it acts as a **current-source load**.\n  - If M₁ were an enhancement-mode NMOS, it would be cut off and the circuit would not operate.\n\n## Qualitative operation\n- M₁ establishes a bias current \\(I_{D1}\\).\n- M₂ converts changes in \\(V_{in}\\) into changes in current at the output node.\n- Increasing \\(V_{in}\\) reduces the PMOS gate-source overdrive, so M₂ conducts less current. The output voltage therefore falls.\n- Decreasing \\(V_{in}\\) turns M₂ on harder, so the output voltage rises.\n- Hence the circuit is inverting.\n\nIf viewed as a logic inverter with a depletion load:\n- \\(V_{in}\\) low → M₂ ON → \\(V_{out}\\) high.\n- \\(V_{in}\\) high → M₂ OFF → M₁ pulls \\(V_{out}\\) low.\n- Static current flows when the output is low, so this is not a low-power CMOS inverter.\n\n## Small-signal analysis\nAssume both transistors are biased in saturation.\n\nFor M₂:\n\\[\ng_{m2}=\\frac{2I_D}{V_{OV2}}, \\qquad r_{o2}=\\frac{1}{\\lambda I_D}\n\\]\n\nM₁ has its gate and source at ac ground, so it presents only its output resistance \\(r_{o1}\\), not \\(1/g_{m1}\\):\n\\[\nr_{o1}=\\frac{1}{\\lambda I_D}\n\\]\n\nThe small-signal voltage gain is\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=-g_{m2}(r_{o2}\\parallel r_{o1})\n\\]\n\nOutput resistance:\n\\[\nR_{out}=r_{o2}\\parallel r_{o1}\n\\]\n\nInput resistance is ideally infinite at low frequency since the input is a MOSFET gate:\n\\[\nR_{in}\\approx \\infty\n\\]\n\n## Summary\n\\[\n\\boxed{\\text{The circuit is an inverting common-source amplifier with a current-source load.}}\n\\]\n\nIts ideal small-signal gain is\n\\[\n\\boxed{A_v=-g_{m2}(r_{o2}\\parallel r_{o1})}\n\\]\nwith a high output resistance and very high input resistance. In practice, the dc output level is sensitive unless feedback or additional biasing is used, because M₁ and M₂ both behave as current sources at the output node.",
        "format": "markdown",
        "sha256": "4d57f74dd1c34138a86e705adefa3d0744a7271f02c10d2c9076c5071b25b2c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M₂ as a PMOS common-source input device and gets the qualitative inversion direction, but misidentifies M₁ as an NMOS current-source load. M₁ is a diode-connected PMOS, so its transconductance sets the load and the gain is approximately −gm₂/gm₁, not −gm₂(ro₂ ∥ ro₁).",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 866,
        "output_tokens": 17676,
        "total_tokens": 18542,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17105,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 866,
        "output_tokens": 17676,
        "total_tokens": 18542,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17105,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the symbols are: **M2 = PMOS**, **M1 = depletion-mode NMOS** with its gate grounded, the circuit is a **PMOS common-source amplifier/inverter with an NMOS current-source load**.\n\n### 1. Device roles\n- **M2 (PMOS):** source at \\(V_{DD}\\), gate at \\(V_{in}\\), drain at \\(V_{out}\\).\n- **M1 (NMOS, depletion-mode):** drain at \\(V_{out}\\), source at ground, gate at ground.\n  - Since \\(V_{GS1}=0\\), M1 must be a depletion-mode device to conduct. It acts as a constant-current sink:\n    \\[\n    I_{SS}=\\frac12 K_n V_{tn}^2,\\qquad \n    K_n=\\mu_n C_{ox}\\left(\\frac WL\\right)_1\n    \\]\n    where \\(V_{tn}=|V_{th,n}|>0\\), valid while M1 is in saturation: \\(V_{out}\\ge V_{tn}\\).\n\n> If M1 were an enhancement-mode NMOS, it would be cut off with \\(V_{GS}=0\\), so the circuit would not function as a useful amplifier/inverter.\n\n### 2. M2 operating regions\nFor PMOS M2:\n\\[\nV_{SG2}=V_{DD}-V_{in}\n\\]\n- **Cutoff:** \\(V_{in} > V_{DD}-V_{tp}\\)\n- **Saturation:** \\(V_{in} < V_{DD}-V_{tp}\\) and\n  \\[\n  V_{out} \\le V_{in}+V_{tp}\n  \\]\n- **Triode:** \\(V_{in} < V_{DD}-V_{tp}\\) and\n  \\[\n  V_{out} > V_{in}+V_{tp}\n  \\]\nwhere \\(V_{tp}=|V_{th,p}|>0\\).\n\n### 3. DC transfer characteristic\n- **Low \\(V_{in}\\):** M2 is strongly on; M2 operates in triode and M1 in saturation. The output is pulled high:\n  \\[\n  V_{out}\\approx V_{DD}\n  \\]\n- **Intermediate \\(V_{in}\\):** both transistors operate in saturation; the circuit has high gain. The transition occurs approximately when\n  \\[\n  \\frac12 K_p(V_{DD}-V_{in}-V_{tp})^2 = I_{SS}\n  \\]\n  \\[\n  \\Rightarrow V_{in,trip}=V_{DD}-V_{tp}-\\sqrt{\\frac{2I_{SS}}{K_p}}\n  \\]\n  where\n  \\[\n  K_p=\\mu_p C_{ox}\\left(\\frac WL\\right)_2\n  \\]\n- **High \\(V_{in}\\):** M2 cuts off, M1 discharges \\(V_{out}\\) to ground:\n  \\[\n  V_{out}\\approx 0\n  \\]\n\nSo the circuit behaves as an **inverter**: high input → low output, low input → high output.\n\n### 4. Small-signal analysis\nIf biased in the high-gain region, both transistors are in saturation. Let the DC bias current be\n\\[\nI_D=I_{SS}\n\\]\nThen\n\\[\ng_{m2}=\\sqrt{2K_p I_D}\n\\]\n\\[\nr_{o2}=\\frac{1}{\\lambda_p I_D},\\qquad\nr_{o1}=\\frac{1}{\\lambda_n I_D}\n\\]\nThe small-signal voltage gain is\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx -g_{m2}(r_{o2}\\parallel r_{o1})\n\\]\nThe output resistance is\n\\[\nR_{out}=r_{o2}\\parallel r_{o1}\n\\]\nInput resistance is ideally infinite because the input is a MOS gate.\n\n### 5. Summary\nThe circuit is an inverting amplifier/inverter with a current-source load. M2 converts the input voltage to a current, and M1 supplies a fixed bias current. Its gain is set by \\(g_{m2}\\) and the finite output resistances of M2 and M1. If M1 is not a depletion-mode device, it remains off and the circuit cannot operate as intended.",
        "format": "markdown",
        "sha256": "62c0d3437d848934305ffba9828aafd313d5e165667aba68fdfcf0bafff227b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It correctly identifies M2 as a PMOS common-source input device and gets the inverting direction, but misidentifies M1 as a depletion NMOS current sink. M1 is a diode-connected PMOS load, so the central gain mechanism is approximately \\(-g_{m2}/g_{m1}\\), not the stated output-resistance gain; the core topology and analysis are wrong.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 866,
        "output_tokens": 18326,
        "total_tokens": 19192,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 866,
        "output_tokens": 18326,
        "total_tokens": 19192,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the MOSFETs are in saturation and body effect is neglected,\n\n\\[\nR_{\\text{out}} = r_{o1}\\left(1+g_{m1}r_{o2}\\right)+r_{o2}\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{R_{\\text{out}} = r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nwhere:\n- \\(r_{o1}\\) is the small-signal output resistance of \\(M_1\\),\n- \\(r_{o2}\\) is the small-signal output resistance of \\(M_2\\),\n- \\(g_{m1}\\) is the transconductance of \\(M_1\\).\n\nIf body effect is included, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\):\n\n\\[\nR_{\\text{out}} = r_{o1}+r_{o2}+(g_{m1}+g_{mb1})r_{o1}r_{o2}\n\\]\n\nThis is the output resistance of a cascode current source.",
        "format": "markdown",
        "sha256": "71177106b398f5f5760b75deac1f9a93e4de711ec9ab6a796b82dd030f7a7102"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the correct output-resistance expression with M1’s transconductance as the cascode factor, and correctly includes the optional body-effect term. It does not explicitly name the PMOS polarity, but it does not analyze the devices as NMOS.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1037,
        "output_tokens": 14705,
        "total_tokens": 15742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11962,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1037,
        "output_tokens": 14705,
        "total_tokens": 15742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11962,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\[\nR_{\\text{out}} = r_{o1}\\left[1+(g_{m1}+g_{mb1})r_{o2}\\right]+r_{o2}\n\\]\n\nIf body effect is neglected,\n\n\\[\n\\boxed{R_{\\text{out}} \\approx g_{m1}r_{o1}r_{o2}}\n\\]\n\nMore exactly,\n\n\\[\n\\boxed{R_{\\text{out}} = r_{o1}(1+g_{m1}r_{o2})+r_{o2}}\n\\]\n\nwhere  \n- \\(g_{m1}, r_{o1}\\) are for \\(M_1\\)  \n- \\(r_{o2}\\) is the output resistance of \\(M_2\\)  \n- \\(M_2\\) acts as a cascode device, making \\(R_{\\text{out}}\\) much larger than \\(r_{o1}\\).",
        "format": "markdown",
        "sha256": "c15b6164aaed2059de8954ba29b96e51cb4403010a4bde24d7bca6c30724734d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The resistance expressions and approximation are correct, but the answer incorrectly identifies M2 as the cascode device; M1 is the cascode device.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1037,
        "output_tokens": 12669,
        "total_tokens": 13706,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9864,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1037,
        "output_tokens": 12669,
        "total_tokens": 13706,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9864,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\[\nR_{\\text{out}} \\approx r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\n\\]\n\nMore commonly, since \\(g_{m1}r_{o1}\\gg 1\\),\n\n\\[\nR_{\\text{out}} \\approx g_{m1}r_{o1}r_{o2}\n\\]\n\nwhere:\n- \\(g_{m1}\\) = small-signal transconductance of \\(M_1\\),\n- \\(r_{o1}\\) = output resistance of \\(M_1\\),\n- \\(r_{o2}\\) = output resistance of \\(M_2\\).\n\nSmall-signal reasoning: \\(M_2\\) has its gate and source ac-grounded, so it acts mainly as \\(r_{o2}\\) from node \\(X\\) to ac ground. Then \\(M_1\\) is a common-source stage with source degeneration resistance \\(r_{o2}\\). Its output resistance is\n\n\\[\nR_{\\text{out}}=r_{o1}(1+g_{m1}r_{o2})+r_{o2}\n= r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}.\n\\]\n\nIf body effect is included, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\). If \\(M_1\\) and \\(M_2\\) are identical, the result simplifies to \\(R_{\\text{out}}\\approx g_m r_o^2\\).",
        "format": "markdown",
        "sha256": "3558f32493460cfa32767769188f8103c79e302653f4f1ad875ac7b25a68ecd0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The resistance expression and the M1 transconductance factor are correct. However, the explanation calls M1 a common-source device rather than identifying it as the common-gate cascode, so the topology reasoning is imprecise.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1039,
        "output_tokens": 15456,
        "total_tokens": 16495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15144,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1039,
        "output_tokens": 15456,
        "total_tokens": 16495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15144,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For M2 to be in saturation, its drain-to-source voltage must be at least its overdrive voltage:\n\n\\[\n|V_{DS2}| \\ge |V_{GS2}| - |V_{TH}|\n\\]\n\n(or for a PMOS, \\(V_{SD2} \\ge V_{SG2}-|V_{TH}|\\)).\n\nLooking at M2 in the figure:\n- Drain is at \\(V_{DD}\\)\n- Source is at node \\(X\\)\n- Gate is at \\(V_{b2}\\)\n\nAssume M2 and M1 are NMOS (if they are PMOS, use the analogous \\(|V_{TH}|\\) and source-gate voltages). Then\n\n\\[\nV_{DS2}=V_{DD}-V_X,\\qquad V_{GS2}=V_{b2}-V_X\n\\]\n\nThe saturation condition becomes:\n\n\\[\nV_{DD}-V_X \\ge (V_{b2}-V_X)-V_{TH}\n\\]\n\n\\[\nV_{DD} \\ge V_{b2}-V_{TH}\n\\]\n\nThis is usually satisfied if \\(V_{b2}\\) is not too high. The more relevant requirement is that M2 must have enough gate–source overdrive:\n\n\\[\nV_{GS2}>V_{TH}\n\\]\n\n\\[\nV_X < V_{b2}-V_{TH}\n\\]\n\nSo the voltage at node \\(X\\) must be low enough, i.e.\n\n\\[\nV_X < V_{b2}-V_{TH}\n\\]\n\nMeanwhile, M1 must also be in saturation, which requires approximately\n\n\\[\nV_X > V_{b1}-V_{TH}\n\\]\n\nTherefore, to keep M2 saturated:\n\n\\[\n\\boxed{V_{b2} > V_{b1}}\n\\]\n\nwith enough margin, and the circuit should be designed so that node \\(X\\) lies in the range\n\n\\[\n\\boxed{V_{b1}-V_{TH} < V_X < V_{b2}-V_{TH}}\n\\]\n\nIn practice, \\(V_{b2}\\) is generated by a bias/replica branch so that M2 always has sufficient drain–source voltage, even with process, voltage, and temperature variations. For PMOS devices, the same idea applies with signs reversed: ensure \\(V_{b2} \\ge V_{b1}+|V_{TH}|\\)-type margin so that\n\n\\[\nV_X \\le V_{b2}+|V_{TH}|\n\\]\n\nand M2 remains in saturation.",
        "format": "markdown",
        "sha256": "884ff7945809b5b3c63bee573979fb5c7ec3d9be3cc53818753ab957b3f764ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M2's terminals and analyzes the devices as NMOS, then treats Vb2 as the control. It misses the essential relation VX = Vb1 + |VGS1| and the resulting saturation condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1045,
        "output_tokens": 12810,
        "total_tokens": 13855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12295,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1045,
        "output_tokens": 12810,
        "total_tokens": 13855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12295,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the PMOS cascode shown, \\(M_2\\) is in saturation when its source-to-drain voltage is at least its overdrive. Let \\(V_X\\) be the node between \\(M_1\\) and \\(M_2\\).\n\nFor \\(M_2\\):\n\\[\nV_{SD2}=V_{DD}-V_X \\ge V_{OV2}=V_{DD}-V_{b2}-|V_{TH2}|\n\\]\nso\n\\[\nV_X \\le V_{b2}+|V_{TH2}|.\n\\]\n\nFor \\(M_1\\) in saturation,\n\\[\nV_X = V_{b1}+|V_{TH1}|+V_{OV1},\n\\]\nwhere \\(V_{OV1}\\) is the overdrive of \\(M_1\\). Substituting:\n\\[\nV_{b1}+|V_{TH1}|+V_{OV1} \\le V_{b2}+|V_{TH2}|.\n\\]\n\nNeglecting threshold/body-effect differences, this simplifies to\n\\[\n\\boxed{V_{b2} \\ge V_{b1}+V_{OV1}}\n\\]\nor equivalently,\n\\[\n\\boxed{V_{b1} \\le V_{b2}-V_{OV1}}.\n\\]\n\nSo to keep \\(M_2\\) in saturation, choose \\(V_{b2}\\) high enough relative to \\(V_{b1}\\), or set \\(V_{b1}\\) low enough relative to \\(V_{b2}\\). In practice, use a margin:\n\\[\nV_{b2} = V_{b1}+V_{OV1}+\\Delta V\n\\]\nwhere \\(\\Delta V\\) is a small safety margin. If body effect matters, include the threshold difference:\n\\[\nV_{b2} \\ge V_{b1}+V_{OV1}+|V_{TH1}|-|V_{TH2}|.\n\\]\n\nThis ensures the drain of \\(M_2\\) (\\(V_X\\)) is not too high and \\(M_2\\) stays in saturation.",
        "format": "markdown",
        "sha256": "68fd200ce43e1553ee37c0aad37f285c11dca5b3c07e36e3641054a91678a004"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, and relates VX to Vb1 to derive the equivalent bias condition, including the threshold-difference term.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 238,
        "output_tokens": 27815,
        "total_tokens": 28053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27387,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 238,
        "output_tokens": 27815,
        "total_tokens": 28053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27387,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M2 is a PMOS with:\n\n- Source at \\(V_{DD}\\)\n- Gate at \\(V_{b2}\\)\n- Drain at node \\(X\\)\n\nFor a PMOS to be in saturation:\n\n\\[\nV_{SD} \\ge V_{SG} - |V_{tp}|\n\\]\n\nFor M2:\n\n\\[\nV_{SD2}=V_{DD}-V_X,\\qquad V_{SG2}=V_{DD}-V_{b2}\n\\]\n\nSo the saturation condition becomes:\n\n\\[\nV_{DD}-V_X \\ge (V_{DD}-V_{b2})-|V_{tp}|\n\\]\n\nSimplifying:\n\n\\[\n\\boxed{V_X \\le V_{b2}+|V_{tp}|}\n\\]\n\nTherefore, **M2 is in saturation if node \\(X\\) is not allowed to rise above \\(V_{b2}+|V_{tp}|\\)**. In practice, this means choosing \\(V_{b2}\\) high enough or ensuring the voltage at \\(X\\), set by M1 and the output voltage, satisfies this inequality.\n\nAlso, for M2 to be ON:\n\n\\[\nV_{DD}-V_{b2} > |V_{tp}|\n\\]\n\n\\[\n\\boxed{V_{b2} < V_{DD}-|V_{tp}|}\n\\]\n\nSo the complete biasing condition is:\n\n\\[\n\\boxed{V_{DD}-|V_{tp}| > V_{b2} \\ge V_X - |V_{tp}|}\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{V_X \\le V_{b2}+|V_{tp}|}\n\\]\n\nwith M2 conducting.",
        "format": "markdown",
        "sha256": "3396de98c3f3ddd0673fdcec4f3d1b9a212f81dd6a84910db9adb22a6f3aee2e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly identifies M2 as PMOS and gives its saturation condition, but treats Vb2 as the control and does not relate VX to Vb1, the essential point of the answer.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1045,
        "output_tokens": 9618,
        "total_tokens": 10663,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9278,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1045,
        "output_tokens": 9618,
        "total_tokens": 10663,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9278,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **single-ended nMOS cascode amplifier with an ideal current-source load**.\n\n- \\(M_1\\): input transistor connected as a common-source device; its gate is driven by \\(V_{\\rm in}\\).\n- \\(M_2\\): cascode/common-gate transistor biased by \\(V_{b1}\\). Its gate is a dc bias and is an ac ground.\n- Node \\(X\\): source of \\(M_2\\), drain of \\(M_1\\).\n- \\(I_1\\): ideal bias/current-source load. In small-signal analysis it is ideally an open circuit, but it sets the dc current through the branch.\n- Output is taken at the drain of \\(M_2\\); the stage is inverting: \\(V_{\\rm in}\\uparrow \\Rightarrow V_{\\rm out}\\downarrow\\).\n\n### DC operating point\nIn normal operation both transistors are in saturation, so\n\\[\nI_{D1}=I_{D2}=I_1 .\n\\]\nNeglecting channel-length modulation for a first estimate,\n\\[\nI_1\\simeq \\frac12 \\mu_n C_{ox}\\left(\\frac WL\\right)_1\n(V_{\\rm in,bias}-V_{TH1})^2\n\\]\nand\n\\[\nI_1\\simeq \\frac12 \\mu_n C_{ox}\\left(\\frac WL\\right)_2\n(V_{b1}-V_X-V_{TH2})^2 .\n\\]\nThus \\(V_{b1}\\) approximately sets the cascode-node voltage\n\\[\nV_X\\simeq V_{b1}-V_{TH2}-V_{OV2},\n\\]\nwhere\n\\[\nV_{OV1}=V_{\\rm in,bias}-V_{TH1},\\qquad\nV_{OV2}=V_{b1}-V_X-V_{TH2}.\n\\]\n\nFor both devices to remain saturated:\n\\[\nV_X \\ge V_{OV1}\\quad\\text{(M1 saturation)}\n\\]\nand\n\\[\nV_{\\rm out}-V_X \\ge V_{OV2}\n\\quad\\Rightarrow\\quad\nV_{\\rm out}\\ge V_{b1}-V_{TH2}\n\\]\n(ignoring body effect). Therefore the cascode consumes extra voltage headroom; the practical minimum output voltage is roughly the sum of the two overdrive voltages when biased for maximum swing:\n\\[\nV_{\\rm out,min}\\approx V_{OV1}+V_{OV2}.\n\\]\nThe upper output limit is set by the current-source compliance, approximately \\(V_{DD}\\) for an ideal current source.\n\n### Small-signal behavior\nLet\n\\[\ng_{m1},\\ r_{o1},\\qquad g_{m2},\\ r_{o2}\n\\]\nbe the small-signal transconductances and output resistances. If \\(M_2\\)'s body is tied to ground, include its body-effect transconductance \\(g_{mb2}\\); if the body is tied to its source, set \\(g_{mb2}=0\\).\n\nThe impedance looking into the source of \\(M_2\\), i.e. at node \\(X\\), is low:\n\\[\nR_X\\simeq \\frac{1}{g_{m2}+g_{mb2}}.\n\\]\nThis is the key cascode action: \\(M_1\\)'s drain sees a low impedance, while \\(M_2\\) transfers the signal current to the high-impedance output.\n\nThe output resistance seen at \\(V_{\\rm out}\\) (with the ideal current source removed/open and the input ac-grounded) is\n\\[\n\\boxed{\nR_{\\rm out}\n= r_{o2}\n+\\left[1+(g_{m2}+g_{mb2})r_{o2}\\right]r_{o1}\n}\n\\]\nwhich for \\(g_mr_o\\gg1\\) is approximately\n\\[\nR_{\\rm out}\\approx (g_{m2}+g_{mb2})r_{o1}r_{o2}.\n\\]\nThis is much larger than the \\(r_{o1}\\) of a simple common-source stage.\n\nFor an ideal current-source load and no external load, the low-frequency voltage gain is approximately\n\\[\n\\boxed{\nA_v=\\frac{v_{\\rm out}}{v_{\\rm in}}\n\\approx -g_{m1}R_{\\rm out}\n\\approx -g_{m1}(g_{m2}+g_{mb2})r_{o1}r_{o2}.\n}\n\\]\nMore exactly, neglecting body effect,\n\\[\nA_v\n\\approx -g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right),\n\\]\nso for identical devices with large intrinsic gain,\n\\[\n|A_v|\\approx (g_mr_o)^2.\n\\]\n\nIf a load resistance \\(R_L\\) is connected at the output, or if the current source has finite output resistance, replace \\(R_{\\rm out}\\) by \\(R_{\\rm out}\\parallel R_L\\). For \\(R_L\\ll R_{\\rm out}\\),\n\\[\nA_v\\approx -g_{m1}R_L.\n\\]\n\nThe input resistance at \\(V_{\\rm in}\\) is very high at low frequency (gate oxide), and the cascode greatly reduces the Miller effect of \\(C_{gd1}\\) because the voltage swing at node \\(X\\) is small. The main high-frequency limitations are the output pole \\(\\omega_p\\approx 1/(R_{\\rm out}C_{\\rm out})\\) and the non-dominant pole at node \\(X\\), approximately\n\\[\n\\omega_X\\approx \\frac{g_{m2}+g_{mb2}}{C_X}.\n\\]\n\n### Summary\nThe circuit is a **cascode common-source amplifier**:\n\n- \\(M_1\\) converts the input voltage into a small-signal current.\n- \\(M_2\\) passes this current to the output while shielding \\(M_1\\) from the output voltage swing.\n- The cascode raises the output resistance and voltage gain substantially compared with a simple common-source stage.\n- The penalty is reduced output voltage swing/headroom, bias sensitivity, and increased output impedance.\n- If the body of \\(M_2\\) is not tied to its source, body effect increases \\(R_{\\rm out}\\) and gain but also raises threshold voltage and reduces headroom.",
        "format": "markdown",
        "sha256": "3f5f20b744cbbeca74e961ae28c90d1174f64e5c8ff7e2af9192bc375f518525"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression required for full credit.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 708,
        "output_tokens": 23210,
        "total_tokens": 23918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21901,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 708,
        "output_tokens": 23210,
        "total_tokens": 23918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21901,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a two-transistor NMOS **cascode amplifier** with an ideal current-source load.\n\n- \\(M_1\\): input/common-source NMOS, driven by \\(V_{in}\\), source grounded.\n- \\(M_2\\): cascode/common-gate NMOS, gate biased at \\(V_{b1}\\).\n- \\(I_1\\): bias current source supplying the stage.\n- Output taken at \\(V_{out}\\); node \\(X\\) is the intermediate source of \\(M_2\\)/drain of \\(M_1\\).\n\nAssuming both transistors are in saturation and neglecting body effect first:\n\n\\[\nI_{D1}=I_{D2}=I_1\n\\]\n\nFor \\(M_1\\):\n\n\\[\nV_{GS1}=V_{in}=V_{TH1}+\\sqrt{\\frac{2I_1}{k_n'(W/L)_1}}\n\\]\n\nFor \\(M_2\\):\n\n\\[\nV_{GS2}=V_{b1}-V_X\n\\]\n\nSaturation conditions:\n\n\\[\nV_X > V_{in}-V_{TH1}=V_{ov1}\n\\]\n\n\\[\nV_{out} > V_{b1}-V_{TH2}=V_X+V_{ov2}\n\\]\n\nThus \\(V_{b1}\\) must be chosen so that \\(M_1\\) and \\(M_2\\) remain saturated; the output swing is reduced by one overdrive voltage compared with a simple common-source stage.\n\nSmall-signal analysis:\n\nLet\n\n\\[\nv_x=v_X,\\quad v_{out}=v_{out},\\quad v_{in}=v_{in}\n\\]\n\nWith \\(V_{b1}\\) ac grounded:\n\n\\[\ni_{d1}=g_{m1}v_{in}+\\frac{v_x}{r_{o1}}\n\\]\n\n\\[\ni_{d2}=-(g_{m2}+g_{mb2})v_x+\\frac{v_{out}-v_x}{r_{o2}}\n\\]\n\nwhere \\(g_{mb2}\\) accounts for body effect if the body of \\(M_2\\) is grounded; if body is tied to source, set \\(g_{mb2}=0\\).\n\nSince the ideal current source has zero small-signal current, KCL at the output gives \\(i_{d2}=0\\). Then KCL at node \\(X\\) gives \\(i_{d1}=i_{d2}=0\\). Solving:\n\n\\[\nv_x=-g_{m1}r_{o1}v_{in}\n\\]\n\n\\[\nv_{out}=v_x\\left[1+(g_{m2}+g_{mb2})r_{o2}\\right]\n\\]\n\nTherefore the voltage gain is\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=-g_{m1}r_{o1}\\left[1+(g_{m2}+g_{mb2})r_{o2}\\right]\n\\]\n\n\\[\n\\boxed{A_v \\approx -g_{m1}(g_{m2}+g_{mb2})r_{o1}r_{o2}}\n\\]\n\nThe output resistance looking into \\(V_{out}\\) is\n\n\\[\nR_{out}=r_{o1}+r_{o2}+(g_{m2}+g_{mb2})r_{o1}r_{o2}\n\\]\n\n\\[\n\\boxed{R_{out}\\approx (g_{m2}+g_{mb2})r_{o1}r_{o2}}\n\\]\n\nSo the cascode increases the output resistance by roughly a factor of \\(g_{m2}r_{o2}\\) compared with a simple common-source stage, and hence increases the achievable voltage gain. If the current source has finite output resistance \\(R_L\\), the gain is approximately\n\n\\[\nA_v\\approx -g_{m1}(R_{out}\\parallel R_L)\n\\]\n\nMain trade-off: higher gain and better isolation, but reduced output voltage headroom because \\(M_2\\) consumes an extra \\(V_{ov2}\\).",
        "format": "markdown",
        "sha256": "334ed1da5cb3884f4067df38e03092f532906540956fff11b4a3599844d2a4a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the equivalent ideal-current-source-load gain expression specified by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 708,
        "output_tokens": 22180,
        "total_tokens": 22888,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21361,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 708,
        "output_tokens": 22180,
        "total_tokens": 22888,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21361,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **cascode amplifier** with a current-source load.\n\n- **M1**: input/common-source NMOS; gate at \\(V_{in}\\), source grounded.\n- **M2**: cascode/common-gate NMOS; gate at DC bias \\(V_{b1}\\), source at node \\(X\\), drain at output.\n- **\\(I_1\\)**: DC current-source load, sets the bias current.\n- Output \\(V_{out}\\) is taken from the drain of M2. At AC, \\(V_{b1}\\) is a DC bias and is AC grounded; \\(I_1\\) is an open circuit if ideal.\n\n## 1. DC operating point\n\nThe same DC current flows through M1 and M2:\n\\[\nI_{D1}=I_{D2}=I_1\n\\]\n\nFor M1 to be in saturation:\n\\[\nV_{DS1}=V_X \\ge V_{GS1}-V_{TH1}=V_{ov1}\n\\]\n\nFor M2 to be in saturation:\n\\[\nV_{DS2}=V_{out}-V_X \\ge V_{GS2}-V_{TH2}=V_{ov2}\n\\]\nwhere\n\\[\nV_{GS2}=V_{b1}-V_X\n\\]\nThus\n\\[\nV_{out}\\ge V_{b1}-V_{TH2}\n\\]\n\nTo keep both devices saturated and allow reasonable output swing, \\(V_{b1}\\) is chosen so that\n\\[\nV_{b1}\\ge V_{TH2}+V_{ov2}+V_{ov1}\n\\]\nMinimum output voltage is then approximately\n\\[\nV_{out,min}\\approx V_{ov1}+V_{ov2}\n\\]\nMaximum output voltage is set by the current-source compliance, e.g. \\(V_{DD}-V_{ov,cs}\\) for a MOS current source.\n\n## 2. Small-signal voltage gain\n\nLet \\(v_x\\) be the small-signal voltage at node \\(X\\), and ignore body effect first.\n\nFor M1:\n\\[\ni_{d1}=g_{m1}v_{in}+\\frac{v_x}{r_{o1}}\n\\]\n\nFor M2:\n\\[\ni_{d2}=-g_{m2}v_x+\\frac{v_{out}-v_x}{r_{o2}}\n\\]\n\nWith an ideal current-source load, no AC current flows through \\(I_1\\), so at the output node:\n\\[\ni_{d2}=0\n\\]\n\nKCL at node \\(X\\):\n\\[\ni_{d1}=i_{d2}\n\\]\nTherefore \\(i_{d1}=0\\), giving\n\\[\nv_x=-g_{m1}r_{o1}v_{in}\n\\]\n\nThen from the M2 equation:\n\\[\n0=-g_{m2}v_x+\\frac{v_{out}-v_x}{r_{o2}}\n\\]\n\\[\nv_{out}=(1+g_{m2}r_{o2})v_x\n\\]\n\nHence\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=-g_{m1}r_{o1}(1+g_{m2}r_{o2})\n\\]\n\\[\n\\boxed{A_v\\approx -g_{m1}g_{m2}r_{o1}r_{o2}}\n\\]\n\nThe gain is negative, i.e. inverting.\n\nIf body effect is included for M2, replace \\(g_{m2}\\) by\n\\[\nG_{m2}=g_{m2}+g_{mb2}\n\\]\nso\n\\[\nA_v\\approx -g_{m1}(g_{m2}+g_{mb2})r_{o1}r_{o2}\n\\]\n\n## 3. Output resistance\n\nThe cascode output resistance, with input AC grounded, is\n\\[\nR_{out,cascode}\n= r_{o2}+(1+g_{m2}r_{o2})r_{o1}\n\\]\nor, including body effect,\n\\[\nR_{out,cascode}\n= r_{o2}+\\left[1+(g_{m2}+g_{mb2})r_{o2}\\right]r_{o1}\n\\]\n\nIf the current source has finite output resistance \\(R_{CS}\\),\n\\[\nR_{out}=R_{out,cascode}\\parallel R_{CS}\n\\]\n\nThe voltage gain can also be written as\n\\[\nA_v\\approx -g_{m1}R_{out}\n\\]\n\nBecause \\(g_{m2}r_{o2}\\gg 1\\), \\(R_{out}\\) is much larger than \\(r_{o1}\\), so the cascode provides much higher gain than a simple common-source stage.\n\n## 4. Summary of operation\n\n- M1 converts the input voltage \\(V_{in}\\) into a small-signal current.\n- M2 passes this current to the output while presenting a high output resistance.\n- \\(V_{b1}\\) biases M2 so that both M1 and M2 remain in saturation.\n- \\(I_1\\) supplies the DC bias current and acts as a high-impedance active load.\n- The circuit has high gain, high output resistance, and reduced Miller effect because node \\(X\\) is a low-impedance node, improving high-frequency response.\n- The main trade-off is reduced output voltage swing due to the required voltage headroom for M2 and the current source.",
        "format": "markdown",
        "sha256": "8b268bc1b602f1db6ac4d05804aa6b92bad119b7948ffee447a7d7a4a22571f8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. The secondary claim about node X being low impedance does not change the essential answer.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 708,
        "output_tokens": 13946,
        "total_tokens": 14654,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 708,
        "output_tokens": 13946,
        "total_tokens": 14654,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The circuit is a basic **NMOS cascode amplifier**:  \n- **M1** is the input/common-source transistor driven by \\(V_{in}\\).  \n- **M2** is the cascode/common-gate transistor biased by \\(V_{b1}\\).  \n- The output is taken from the drain of M2, with \\(R_D\\) as the load.\n\nSo, the series combination of a common-source stage (M1) and a common-gate stage (M2) is a cascode structure.",
        "format": "markdown",
        "sha256": "f4735026b58e820539cc03713ca56642cea7aa2326e0977c12de281c5950b3cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and treats M1 as a common-source NMOS. M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 757,
        "output_tokens": 1130,
        "total_tokens": 1887,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1021,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 757,
        "output_tokens": 1130,
        "total_tokens": 1887,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1021,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. It is a basic NMOS cascode amplifier.\n\n- **M₁** is the input/common-source transistor: \\(V_{in}\\) drives its gate, and its source is grounded.\n- **M₂** is the cascode/common-gate transistor: its gate is held at a DC bias \\(V_{b1}\\), its source connects to the drain of M₁, and its drain connects to the load resistor \\(R_D\\) and output \\(V_{out}\\).\n\nSo the input stage is common-source and the upper stage is common-gate, which is exactly the cascode configuration.",
        "format": "markdown",
        "sha256": "15cc00dd8b0c61aef87c42899091d2e15210281646904fdc6f05c944ab0cc5ed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The conclusion is wrong: M1 is a PMOS source follower with its drain grounded, not a common-source transistor, so the circuit is not a cascode.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 757,
        "output_tokens": 630,
        "total_tokens": 1387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 508,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 757,
        "output_tokens": 630,
        "total_tokens": 1387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 508,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** The circuit is a **cascode amplifier**.\n\n- **M₁** is the input transistor in a **common-source** configuration: input \\(V_{in}\\) at its gate, source grounded.\n- **M₂** is stacked on top in a **common-gate** configuration: its gate is held at a DC bias \\(V_{b1}\\), so it is AC-grounded. Its source is connected to M₁’s drain.\n- The output \\(V_{out}\\) is taken from M₂’s drain, with resistor \\(R_D\\) as the load.\n\nThus, M₁ converts the input voltage to a current, and M₂ passes that current to the output while providing the benefits of a cascode stage, such as higher output resistance and reduced Miller effect. This is the standard cascode structure.",
        "format": "markdown",
        "sha256": "a359d87a2a777fe0e590d6a67801931a8370e6f315bee97ac42195ccb605499e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Incorrectly calls the circuit a cascode and misidentifies M₁ as a grounded-source common-source device; M₁ is a PMOS source follower, so the cascode resistance boost is absent.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 757,
        "output_tokens": 751,
        "total_tokens": 1508,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 586,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 757,
        "output_tokens": 751,
        "total_tokens": 1508,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 586,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is reduced in a cascode because the input transistor’s drain/collector is **not allowed to swing with the full output voltage**.\n\nIn a simple common-source/common-emitter stage, the feedback capacitor \\(C_{gd}\\) or \\(C_{bc}\\) sees a large inverting output swing, so it is multiplied by approximately  \n\\[\n1+|A_v| \\approx 1+g_mR_L\n\\]\ngiving a large input capacitance:\n\\[\nC_{in}\\approx C_{gs}+C_{gd}(1+g_mR_L).\n\\]\n\nIn a cascode, the first transistor is loaded by the low input impedance of a common-gate/common-base stage, roughly\n\\[\nR_{in,CG}\\approx \\frac{1}{g_m}.\n\\]\nSo the voltage gain from the input gate/base to the first transistor’s drain/collector is only about\n\\[\nA_{v1}\\approx -\\frac{g_{m1}}{g_{m2}}\\approx -1\n\\]\nfor matched devices. Therefore the Miller multiplication of \\(C_{gd1}\\) is only about\n\\[\n1+|A_{v1}|\\approx 2,\n\\]\nnot the full amplifier gain.\n\nThe large overall gain is produced by the second, common-gate/common-base stage, but its feedback capacitance is between an **AC-grounded gate/base** and the output, so it does not feed back from output to input. Thus the input capacitance stays small, and the Miller effect is much less pronounced—this is why the cascode gives wider bandwidth.",
        "format": "markdown",
        "sha256": "f1515f1718afa0625b889def6fd80fd93059f6a5224319d5c0cc9934936263da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and shows that the gain across the input device’s Cgd is about −1, giving a Miller factor of about 2 rather than the full-stage gain.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 43,
        "output_tokens": 7109,
        "total_tokens": 7152,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 43,
        "output_tokens": 7109,
        "total_tokens": 7152,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In a common-emitter/common-source stage, the feedback capacitance \\(C_{bc}\\) (BJT) or \\(C_{gd}\\) (MOSFET) bridges the input and output. If the stage has voltage gain \\(A_v\\), the effective input capacitance is approximately\n\n\\[\nC_{\\text{in,M}} = C_f(1+|A_v|),\n\\]\n\nso a large inverting gain makes \\(C_{bc}/C_{gd}\\) look much larger at the input. This is the Miller effect.\n\nA cascode greatly reduces this because the first transistor’s collector/drain is no longer connected directly to a high-swing output. Instead, it drives the emitter/source of a common-base/common-gate transistor, whose input impedance is low:\n\n\\[\nR_{\\text{in,CB/CG}} \\approx \\frac{1}{g_m}.\n\\]\n\nTherefore the voltage gain of the first transistor is only\n\n\\[\nA_{v1} \\approx -g_{m1}\\frac{1}{g_{m2}}\n= -\\frac{g_{m1}}{g_{m2}} \\approx -1\n\\]\n\nfor similar devices and bias currents. Its Miller multiplication factor is then only about\n\n\\[\n1+|A_{v1}| \\approx 2\n\\]\n\ninstead of \\(1+g_m R_L\\). So the input capacitance due to the lower transistor’s feedback capacitance is roughly \\(2C_{bc}\\) or \\(2C_{gd}\\), not a heavily multiplied value.\n\nThe large output voltage swing occurs at the collector/drain of the upper transistor. But its base/gate is ac grounded, so its \\(C_{bc}/C_{gd}\\) appears mainly from the output to ac ground, not as feedback to the overall input. Thus the cascode “shields” the input from the output swing, greatly reducing Miller capacitance and improving high-frequency bandwidth. It is reduced, not completely eliminated, because the lower device still has a small finite gain.",
        "format": "markdown",
        "sha256": "0e2f9243693d618e01eaa5c4434102dfcdb0d72fa3d6a344c123003835259a08"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance common-gate source node and the resulting roughly unity gain across the lower device’s feedback capacitance, giving a Miller factor near 2 rather than the full-stage gain. It also correctly notes that the effect is reduced, not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 43,
        "output_tokens": 4930,
        "total_tokens": 4973,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4404,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 43,
        "output_tokens": 4930,
        "total_tokens": 4973,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4404,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect occurs when a feedback capacitance from output back to input—such as \\(C_{bc}\\) in a BJT or \\(C_{gd}\\) in a MOSFET—is effectively multiplied by the stage’s voltage gain:\n\n\\[\nC_M = C_f(1+|A_v|)\n\\]\n\nIn a simple common-emitter/common-source stage, the collector/drain is the output, so it swings by the full large gain \\(A_v\\). That makes the input capacitance look like \\(C_{bc}(1+g_m R_L)\\), which can be very large and limits bandwidth.\n\nIn a cascode, the input transistor is followed by a common-base/common-gate stage. The base/gate of the upper transistor is AC-grounded, so its emitter/source presents a low input resistance to the lower transistor:\n\n\\[\nR_{\\text{in,CB}} \\approx \\frac{1}{g_m}\n\\]\n\nTherefore the voltage gain from the input base/gate to the lower transistor’s collector/drain is only\n\n\\[\nA_{v1} \\approx -g_{m1}\\frac{1}{g_{m2}} \\approx -1\n\\]\n\nSo the lower transistor’s collector/drain voltage barely swings. Its feedback capacitance is multiplied only by about\n\n\\[\n1+|A_{v1}| \\approx 2\n\\]\n\ninstead of by the entire cascode gain. The upper common-base/common-gate transistor shields the input device from the large output voltage swing and provides most of the voltage gain/current buffering.\n\nThus, in a cascode the Miller capacitance is roughly \\(2C_{bc}\\) or \\(2C_{gd}\\), rather than \\(C_{bc}(1+g_m R_L)\\) or \\(C_{gd}(1+g_m R_L)\\). That is why the Miller effect is much less pronounced and the bandwidth is improved.",
        "format": "markdown",
        "sha256": "c6cc93f59883c1e587bb7407a63dfb4ab0d063474e86f1706b4f1f0e4fa8ec9d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance node at the lower transistor’s drain, giving a local gain of about −1 and an effective Miller multiplication of roughly 2 rather than the full cascode gain. The wording that the node “barely swings” slightly overstates the effect, but the answer’s explicit estimate captures the essential mechanism.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 43,
        "output_tokens": 3419,
        "total_tokens": 3462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2893,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 43,
        "output_tokens": 3419,
        "total_tokens": 3462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2893,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual interpretation of the figure:\n\n- **M1** is a PMOS current-source/active load: source at \\(V_{DD}\\), gate at \\(V_{b2}\\), drain at \\(V_{out}\\).\n- **M2** is an NMOS common-source transistor: drain at \\(V_{out}\\), source at \\(V_{b1}\\), gate at \\(V_{in}\\).\n- The output is taken at the common drain node. Increasing \\(V_{in}\\) increases M2’s drain current, so \\(V_{out}\\) moves **down** (inverting stage).\n\n### 1. DC operating point\nAssume both devices are in saturation in the useful region.\n\nFor M1:\n\\[\nV_{SG1}=V_{DD}-V_{b2},\\qquad\nV_{OV1}=V_{SG1}-|V_{TP1}|\n\\]\n\\[\nI_{D1}=\\frac12 K_p V_{OV1}^2\\left(1+\\lambda_p(V_{DD}-V_{out})\\right)\n\\]\nwhere \\(K_p=\\mu_p C_{ox}(W/L)_1\\).\nSaturation condition:\n\\[\nV_{out}<V_{DD}-V_{OV1}\n\\]\n\nFor M2:\n\\[\nV_{GS2}=V_{in}-V_{b1},\\qquad\nV_{OV2}=V_{GS2}-V_{TN2}\n\\]\n\\[\nI_{D2}=\\frac12 K_n V_{OV2}^2\\left(1+\\lambda_n(V_{out}-V_{b1})\\right)\n\\]\nwhere \\(K_n=\\mu_n C_{ox}(W/L)_2\\).\nSaturation condition:\n\\[\nV_{in}>V_{b1}+V_{TN2},\\qquad\nV_{out}>V_{b1}+V_{OV2}\n\\]\n\nAt the output node, ignoring external load:\n\\[\nI_{D1}=I_{D2}\n\\]\nSolving this gives the DC output voltage \\(V_{out}\\). If the currents are mismatched, the output moves to a rail until one device enters triode or turns off. The high-gain region is\n\\[\nV_{b1}+V_{OV2}<V_{out}<V_{DD}-V_{OV1}.\n\\]\nIf channel-length modulation is neglected (\\(\\lambda=0\\)) and the two currents are exactly equal, the output voltage is theoretically indeterminate in saturation; in practice, \\(\\lambda\\), mismatch, or load fixes it.\n\n### 2. Small-signal voltage gain\nWith \\(V_{b1}\\) and \\(V_{b2}\\) at AC ground and both transistors saturated:\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=-g_{m2}(r_{o1}\\parallel r_{o2})\n\\]\nwhere\n\\[\ng_{m2}=\\sqrt{2K_n I_D}\n=\\frac{2I_D}{V_{OV2}},\n\\]\n\\[\nr_{o1}=\\frac{1}{\\lambda_p I_D},\\qquad\nr_{o2}=\\frac{1}{\\lambda_n I_D}.\n\\]\nThe negative sign indicates inversion. If an external load \\(R_L\\) is connected, replace \\(r_{o1}\\parallel r_{o2}\\) by\n\\[\nR_L\\parallel r_{o1}\\parallel r_{o2}.\n\\]\n\n### 3. Input and output resistance\n- Input resistance: \\(R_{in}\\approx \\infty\\) at low frequencies; gate capacitance dominates at high frequency.\n- Output resistance: \\(R_{out}=r_{o1}\\parallel r_{o2}\\).\n\n### 4. Operating summary\n- **Low \\(V_{in}\\):** M2 is off; \\(V_{out}\\approx V_{DD}\\) (high).\n- **High \\(V_{in}\\):** M2 pulls \\(V_{out}\\) down; \\(V_{out}\\) can approach \\(V_{b1}+V_{OV2}\\) or lower, and M2 enters triode.\n- **Amplifier region:** both devices saturated; the stage is a high-gain, inverting common-source amplifier with a PMOS active current-source load.\n- Viewed as a current-source/transconductance circuit, the net output current is\n\\[\nI_{out}=I_{D1}-I_{D2}\n\\]\n(direction depending on sign convention), and its output resistance is \\(R_{out}=r_{o1}\\parallel r_{o2}\\).\n\nNumerical values for \\(V_{out}\\), \\(A_v\\), \\(R_{out}\\), etc. require the device parameters (\\(\\mu C_{ox}, W/L, V_{th}, \\lambda\\)), \\(V_{DD}\\), \\(V_{b1}\\), \\(V_{b2}\\), and \\(V_{in}\\).",
        "format": "markdown",
        "sha256": "a33ad61102ded8a3f6b831291c6ea296fe8d1f62e35516991381a421a966032e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies an inverting common-source stage. The figure’s essential topology is a common-gate NMOS stage with Vin at M2’s source; the golden solution explicitly assigns zero for this mistake.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 233,
        "output_tokens": 16602,
        "total_tokens": 16835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 233,
        "output_tokens": 16602,
        "total_tokens": 16835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the symbols denote enhancement-mode MOSFETs: **M1 is PMOS** (source at \\(V_{DD}\\)), and **M2 is NMOS** (source at \\(V_{b1}\\)). The circuit is an **active-loaded common-source amplifier**: M2 is the input/driver transistor, and M1 is a PMOS current-source load biased by \\(V_{b2}\\).\n\n## 1. DC operation\n\nFor M1 to conduct:\n\\[\nV_{DD}-V_{b2} > |V_{thp}|\n\\]\n\nFor M2 to conduct:\n\\[\nV_{in}-V_{b1} > V_{thn}\n\\]\n\nFor M2 to be in saturation:\n\\[\nV_{out} > V_{in}-V_{thn}\n\\]\n\nFor M1 to be in saturation:\n\\[\nV_{out} < V_{b2}+|V_{thp}|\n\\]\n\nAt the output node, no DC current flows out, so\n\\[\nI_{D1}=I_{D2}=I_D\n\\]\n\nUsing the square-law model:\n\\[\nI_{D2}=\\frac12 \\mu_n C_{ox}\\left(\\frac WL\\right)_2 (V_{in}-V_{b1}-V_{thn})^2(1+\\lambda_n(V_{out}-V_{b1}))\n\\]\n\\[\nI_{D1}=\\frac12 \\mu_p C_{ox}\\left(\\frac WL\\right)_1 (V_{DD}-V_{b2}-|V_{thp}|)^2(1+\\lambda_p(V_{DD}-V_{out}))\n\\]\n\nEquating these gives the DC output voltage \\(V_{out}\\). In practice, \\(V_{b2}\\) sets the bias current, and \\(V_{in}\\) must be chosen so M2 carries the same current. If channel-length modulation is neglected, the bias is very sensitive and normally feedback or accurate current-mirror biasing is required.\n\n## 2. Small-signal analysis\n\nAt low frequency:\n- M1’s gate is at AC ground, so it simply presents an output resistance\n  \\[\n  r_{o1}=\\frac{1}{\\lambda_p I_D}\n  \\]\n- M2 acts as a common-source transistor with transconductance\n  \\[\n  g_{m2}=\\sqrt{2\\mu_n C_{ox}\\left(\\frac WL\\right)_2 I_D}\n  =\\frac{2I_D}{V_{in}-V_{b1}-V_{thn}}\n  \\]\n  and output resistance\n  \\[\n  r_{o2}=\\frac{1}{\\lambda_n I_D}\n  \\]\n\nThe small-signal equivalent has a controlled current source \\(g_{m2}v_{in}\\) at the output, with output resistance\n\\[\nR_{out}=r_{o1}\\parallel r_{o2}\n\\]\n\nTherefore the voltage gain is\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=-g_{m2}(r_{o1}\\parallel r_{o2})\n\\]\n\nSo the circuit is an **inverting amplifier**. Increasing \\(V_{in}\\) increases M2’s current, pulling \\(V_{out}\\) down.\n\n## 3. Frequency response\n\nHigh-frequency gain is limited by parasitic capacitances. The output pole is approximately\n\\[\n\\omega_p \\approx \\frac{1}{R_{out}C_{out}}\n\\]\nwhere \\(C_{out}\\) includes drain capacitances of M1 and M2 and any load capacitance.\n\nAt the input, the Miller effect magnifies \\(C_{gd2}\\):\n\\[\nC_{in}\\approx C_{gs2}+(1+|A_v|)C_{gd2}\n\\]\n\n## 4. Key points\n\n- M1 is a PMOS active load, not a switching transistor.\n- M2 is the amplifying NMOS transistor.\n- Both transistors must remain in saturation for linear amplification.\n- Output swing is limited by:\n  \\[\n  V_{in}-V_{thn}<V_{out}<V_{b2}+|V_{thp}|\n  \\]\n- If \\(V_{b1}=0\\), M2 is a standard grounded-source NMOS.\n- \\(V_{b2}\\) controls the bias current, which affects \\(g_{m2}\\), \\(r_{o1}\\), gain, and bandwidth.\n\nIn short, the circuit is a **PMOS-load NMOS common-source amplifier** with inverting gain\n\\[\n\\boxed{A_v=-g_{m2}(r_{o1}\\parallel r_{o2})}\n\\]\nand output resistance\n\\[\n\\boxed{R_{out}=r_{o1}\\parallel r_{o2}}\n\\]",
        "format": "markdown",
        "sha256": "d102083a7482cd87dcb762c8ba32a55119ec3dad1723e57eed34205c44584bb1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies a common-source stage. The circuit is a common-gate NMOS stage with Vin at M2’s source and Vb1 biasing its gate; this reverses the gain conclusion and contradicts the golden solution’s explicit zero-credit rule.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 12714,
        "total_tokens": 13364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10257,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 12714,
        "total_tokens": 13364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10257,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a two-transistor CMOS gain stage: an **NMOS driver \\(M_2\\) with a PMOS current-source/active load \\(M_1\\)**. It is essentially a common-source amplifier with an active load; when used digitally it behaves like an inverter with a current-source load (a ratioed logic gate).\n\nAssume \\(M_1\\) is PMOS and \\(M_2\\) is NMOS, both enhancement devices, with \\(V_{b1}\\) a dc source/lower-bias voltage and \\(V_{b2}\\) the dc gate bias of the PMOS load. For small-signal analysis the bias terminals are ac ground.\n\n## 1. DC operating conditions\n\nDefine\n\\[\nV_{SG1}=V_{DD}-V_{b2},\\qquad \nV_{GS2}=V_{in}-V_{b1}.\n\\]\nIgnoring body effect for the moment, let the threshold magnitudes be \\(|V_{TP}|\\) and \\(V_{TN}\\).\n\nFor \\(M_1\\) to be on:\n\\[\nV_{DD}-V_{b2}>|V_{TP}|.\n\\]\nFor \\(M_1\\) to be in saturation (current-source load):\n\\[\nV_{out}\\le V_{b2}+|V_{TP}|.\n\\]\nIts saturation current is approximately\n\\[\nI_{D1}=\\frac12\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1\n\\bigl(V_{DD}-V_{b2}-|V_{TP}|\\bigr)^2\n[1+\\lambda_p(V_{DD}-V_{out})].\n\\]\n\nFor \\(M_2\\) to be on:\n\\[\nV_{in}>V_{b1}+V_{TN}.\n\\]\nFor \\(M_2\\) to be in saturation:\n\\[\nV_{out}\\ge V_{in}-V_{TN}.\n\\]\nIts saturation current is\n\\[\nI_{D2}=\\frac12\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2\n\\bigl(V_{in}-V_{b1}-V_{TN}\\bigr)^2\n[1+\\lambda_n(V_{out}-V_{b1})].\n\\]\n\nAt the dc operating point,\n\\[\nI_{D1}=I_{D2}.\n\\]\nThis equation determines \\(V_{out}\\). If channel-length modulation is neglected, to a first approximation the input required to balance the load current is\n\\[\nV_{in}\\approx\nV_{b1}+V_{TN}\n+\\sqrt{\\frac{\\mu_p(W/L)_1}{\\mu_n(W/L)_2}}\n\\left(V_{DD}-V_{b2}-|V_{TP}|\\right).\n\\]\n\nFor the useful high-gain/amplifier region both transistors are saturated:\n\\[\n\\boxed{V_{in}-V_{TN}\\lesssim V_{out}\\lesssim V_{b2}+|V_{TP}|}.\n\\]\n\n## 2. Qualitative operation\n\n- If \\(V_{in}<V_{b1}+V_{TN}\\), \\(M_2\\) is off (or nearly off). The output is pulled high, ideally to \\(V_{DD}\\) with no load.\n- As \\(V_{in}\\) increases, \\(M_2\\) turns on and sinks current, pulling \\(V_{out}\\) down. The stage is **inverting**.\n- While both devices are in saturation, the stage has high small-signal voltage gain.\n- If \\(V_{in}\\) becomes large enough, \\(M_2\\) enters the triode region and the output reaches its low level. Because the load \\(M_1\\) supplies a finite current, the low level is not exactly \\(V_{b1}\\); it is set by the current balance. If \\(V_{b1}=0\\), this is the usual 0/low rail approximately.\n- \\(V_{b2}\\) controls the load current: lowering \\(V_{b2}\\) increases \\(V_{SG1}\\), increasing the current supplied by \\(M_1\\). Raising \\(V_{b1}\\) shifts the effective input threshold and the output low level upward.\n\nUnlike a standard complementary CMOS inverter, the PMOS gate is not tied to the input, so the circuit draws static current during conduction. It is therefore a current-source-loaded inverter/amplifier, not a zero-static-power CMOS inverter.\n\n## 3. Small-signal model at the bias point\n\nLet the quiescent drain current be \\(I_D\\). In saturation,\n\\[\ng_{m2}=\n\\sqrt{2\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 I_D}\n=\n\\frac{2I_D}{V_{in}-V_{b1}-V_{TN}},\n\\]\n\\[\nr_{o2}=\\frac{1}{\\lambda_n I_D},\\qquad\nr_{o1}=\\frac{1}{\\lambda_p I_D}.\n\\]\nThe PMOS load has no small-signal gate drive because its gate is at dc bias \\(V_{b2}\\); only its output resistance \\(r_{o1}\\) shunts the output.\n\nThus the output resistance is\n\\[\n\\boxed{R_{out}=r_{o1}\\parallel r_{o2}}.\n\\]\n\nThe small-signal voltage gain from \\(V_{in}\\) to \\(V_{out}\\) is\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=-g_{m2}(r_{o1}\\parallel r_{o2})\n}\n\\]\nfor the ideal \\(V_{b1}\\) source (so the source of \\(M_2\\) is an ac ground).\n\nIf an external load \\(R_L\\) is connected,\n\\[\nA_v=-g_{m2}\\bigl(r_{o1}\\parallel r_{o2}\\parallel R_L\\bigr).\n\\]\nWith a load capacitance \\(C_L\\), the dominant pole is approximately\n\\[\np\\approx -\\frac{1}{(r_{o1}\\parallel r_{o2}\\parallel R_L)C_L}\n\\]\nat low frequency, neglecting transistor parasitic capacitances. At higher frequencies the gate-drain capacitance produces Miller effect and reduces the bandwidth.\n\nIf channel-length modulation is small and \\(r_{o1}\\gg r_{o2}\\), the intrinsic gain approaches\n\\[\n|A_v|\\approx g_{m2}r_{o2}\n\\approx \\frac{2V_{A,n}}{V_{in}-V_{b1}-V_{TN}},\n\\]\nwhere \\(V_{A,n}=1/\\lambda_n\\).\n\n## 4. Body-bias note\n\nIf \\(V_{b1}\\) is intended to be the NMOS body/bulk bias rather than its source bias, then set the source to the actual lower rail (usually ground) in the equations above and include body effect in\n\\[\nV_{TN}=V_{TN0}\n+\\gamma\\left(\n\\sqrt{2\\Phi_F+V_{SB}}-\\sqrt{2\\Phi_F}\n\\right).\n\\]\nA fixed body bias changes the dc current, threshold, and small-signal \\(g_m\\) through the bias point; an additional body transconductance \\(g_{mb}\\) appears only if the body voltage receives an ac signal. For fixed dc bias it does not appear in the simple gain expression above.\n\nSo, in summary, the circuit is an **inverting active-load common-source amplifier/current-source-loaded inverter**, with  \n\\[\nV_{out}\\text{ high } \\approx V_{DD} \\quad\\text{when }M_2\\text{ is off},\n\\]\nhigh gain when both transistors are saturated, and  \n\\[\nA_v\\approx -g_{m2}(r_{o1}\\parallel r_{o2}).\n\\]",
        "format": "markdown",
        "sha256": "f66669e157294632a2b7600cebe811d0a662ddc06380833018a41cc0bcc33772"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at the gate of M2 and treats the circuit as an inverting common-source stage. In the figure, Vin is applied at M2’s source, making it a non-inverting common-gate stage; the golden solution assigns 0 for this topology error.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 26619,
        "total_tokens": 27269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25021,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 26619,
        "total_tokens": 27269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25021,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nReason: In the small-signal model there are effectively two independent capacitive nodes:\n- Input node (gate of \\(M_1\\)): \\(C_{GS}\\), along with the Miller effect from \\(C_{GD}\\)\n- Output node (drain of \\(M_1\\)): \\(C_{DB}\\), \\(C_{GD2}\\), and \\(C_{DB2}\\) (plus \\(C_{GD}\\))\n\nThe gate of \\(M_2\\) is at ac ground, so its parasitic capacitances (\\(C_{GD2}\\), \\(C_{DB2}\\)) do not create an additional independent pole; they just add to the output-node capacitance.\n\n\\[\n\\boxed{2}\n\\]",
        "format": "markdown",
        "sha256": "4a1cdce106eecf1e33fc441f43f0bd0cedf037c940b64c2cf3304a7548ba0fff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent nodes—the M1 gate and output—and assigns the relevant capacitances without inventing an extra pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 935,
        "output_tokens": 19524,
        "total_tokens": 20459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 935,
        "output_tokens": 19524,
        "total_tokens": 20459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **3 poles**.\n\nReason: The small-signal model has three independent capacitive nodes:  \n1. input gate node of \\(M_1\\),  \n2. intermediate node between \\(M_1\\) drain and \\(M_2\\) source, and  \n3. output node at \\(M_2\\) drain.  \n\nThus, its transfer function is third-order, so it has **three poles**.",
        "format": "markdown",
        "sha256": "237f776f63711d9e6c4cbda1e7f2ef53be363e167e1e587de564a7de11592530"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit has two poles, not three. The answer invents an intermediate node: M1's drain and M2's drain are the same output node, while M2's source is at AC ground.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 23592,
        "total_tokens": 24528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 23592,
        "total_tokens": 24528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**3 poles**\n\nAssuming the small-signal high-frequency model, the independent capacitive state variables are:\n- input node: \\(C_{GS}\\), \\(C_{GD}\\)\n- drain of M1 / source of M2 node: \\(C_{GD}\\), \\(C_{DB}\\)\n- drain of M2: \\(C_{GD2} \\parallel C_{DB2}\\)\n\nHowever, \\(C_{GS}\\), \\(C_{GD}\\), and \\(C_{DB}\\) form a capacitor-only loop, so one of them is not independent. The two capacitors at M2’s drain are in parallel and count as one effective capacitor.\n\nThus the circuit has **3 independent poles**.",
        "format": "markdown",
        "sha256": "3ceec46c444db9483208ef49967844e4b24323171a35f9ca782c6b160149107b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer recognizes that the gate/output capacitors are coupled, but incorrectly treats the M1 and M2 drains as separate nodes and concludes three poles; the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 935,
        "output_tokens": 24124,
        "total_tokens": 25059,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 935,
        "output_tokens": 24124,
        "total_tokens": 25059,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming both MOSFETs are matched enhancement-mode NMOS devices, and neglecting body effect and channel-length modulation unless noted:\n\n## 1. Circuit configuration\n- \\(M_1\\): lower NMOS, source grounded, gate at \\(V_{in}\\), drain at node \\(X\\).\n- \\(M_2\\): upper NMOS, source at node \\(X\\), drain at \\(V_{out}\\), gate also at \\(V_{in}\\).\n- \\(R_D\\): load resistor from \\(V_{DD}\\) to \\(V_{out}\\).\n\nThus \\(M_1\\) and \\(M_2\\) are stacked in series, and the input drives both gates. This is not a standard cascode stage, because the upper device gate is not at ac ground; it is also driven by the input.\n\n## 2. DC operation\nFor \\(V_{in} < V_{th}\\), both transistors are off:\n\\[\nI_D=0,\\qquad V_{out}=V_{DD}\n\\]\n\nAs \\(V_{in}\\) increases above \\(V_{th}\\), current begins to flow. Since \\(V_X>0\\), \\(M_2\\) has\n\\[\nV_{GS2}=V_{in}-V_X < V_{GS1}=V_{in}\n\\]\nso \\(M_2\\) has less overdrive than \\(M_1\\). In normal conduction, \\(M_1\\) typically operates in the triode region and \\(M_2\\) in saturation.\n\nLet \\(V_{ov}=V_{in}-V_{th}\\) and \\(k_n=\\mu_n C_{ox}W/L\\). For \\(M_1\\) in triode:\n\\[\nI_D=k_n\\left(V_{ov}V_X-\\frac12V_X^2\\right)\n\\]\nFor \\(M_2\\) in saturation:\n\\[\nI_D=\\frac12k_n(V_{in}-V_X-V_{th})^2\n\\]\nEquating these gives\n\\[\nV_X=\\left(1-\\frac{1}{\\sqrt2}\\right)V_{ov}\\approx0.293V_{ov}\n\\]\nand\n\\[\nI_D=\\frac14k_nV_{ov}^2\n\\]\nso\n\\[\nV_{out}=V_{DD}-\\frac14k_nR_DV_{ov}^2\n\\]\n\nThis expression is valid while \\(M_2\\) remains in saturation:\n\\[\nV_{out}\\ge V_{in}-V_{th}=V_{ov}\n\\]\nIf \\(V_{out}<V_{ov}\\), \\(M_2\\) enters triode and the output approaches a low voltage determined by the series on-resistance of \\(M_1\\) and \\(M_2\\) with \\(R_D\\).\n\n## 3. Small-signal analysis\nLet \\(v_{in}\\) be a small ac input. At the bias point:\n\\[\ng_{m2}=\\frac{\\partial I_D}{\\partial V_{GS2}}\n=\\frac{k_n}{\\sqrt2}V_{ov}\n\\]\n\\[\ng_{ds1}=\\frac{\\partial I_D}{\\partial V_{DS1}}\n=\\frac{k_n}{\\sqrt2}V_{ov}\n\\]\n\\[\ng_{m1}=\\frac{\\partial I_D}{\\partial V_{GS1}}\n=k_n\\left(1-\\frac{1}{\\sqrt2}\\right)V_{ov}\n\\]\n\nApplying KCL at node \\(X\\) and at the output, the effective transconductance is\n\\[\nG_m=\\frac{i_{d2}}{v_{in}}=\\frac12k_nV_{ov}\n\\]\nThus the small-signal voltage gain is\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=-G_mR_D\n=-\\frac12k_n(V_{in}-V_{th})R_D\n\\]\n\nIf channel-length modulation is included, replace \\(R_D\\) by \\(R_D\\parallel r_{o2}\\) to first order:\n\\[\nA_v\\approx-\\frac12k_nV_{ov}(R_D\\parallel r_{o2})\n\\]\n\n## 4. Key points\n- The circuit is an inverting stacked-NMOS amplifier/inverter.\n- Because the upper gate is driven by the input, it does not provide the output-resistance boost of a true cascode.\n- The series stack reduces the current and gain compared with a single common-source NMOS with the same \\(k_n\\), \\(V_{ov}\\), and \\(R_D\\).\n- Input resistance is very high, set by MOS gate impedance.\n- Output resistance is approximately \\(R_D\\), or \\(R_D\\parallel r_{o2}\\) if channel-length modulation is considered.\n- If the body of \\(M_2\\) is grounded, body effect will increase its threshold voltage and reduce the current; the above equations assume body effect is negligible or the body is tied to source.",
        "format": "markdown",
        "sha256": "d56165e60c32db4361f79be1f12531181e09520963bb82f13c0c33c556049cf9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the common-gate series NMOS stack and the lower-triode/upper-saturation operation, with ideal equations consistent with reduced drive. But it misses the central conclusion that the pair behaves approximately like one NMOS with effective channel length L1 + L2, and its output-resistance treatment neglects the stack contribution.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 761,
        "output_tokens": 22418,
        "total_tokens": 23179,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 761,
        "output_tokens": 22418,
        "total_tokens": 23179,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming both transistors are identical enhancement-mode NMOS devices with  \n\\[\n\\beta=\\mu_n C_{ox}\\frac{W}{L},\\qquad V_{th}>0\n\\]\nand neglecting channel-length modulation/body effect for first-order analysis.\n\n## Circuit type\nThe circuit is a **resistor-loaded NMOS inverter** with a **stacked NMOS pull-down network**.  \nM1 and M2 are in series: M2 drain is at \\(V_{out}\\), M2 source is M1 drain, M1 source is ground. Both gates are tied to \\(V_{in}\\).\n\nBecause the two series NMOS devices have the same gate voltage, the stack behaves approximately like a **single NMOS transistor with half the transconductance parameter**:\n\\[\n\\beta_{\\text{eff}}=\\frac{\\beta}{2}\n\\]\n\n## DC operation\n\n### 1. Cutoff region\nIf\n\\[\nV_{in}<V_{th}\n\\]\nboth M1 and M2 are OFF.\n\\[\nI_D=0,\\qquad V_{out}=V_{DD}\n\\]\n\n### 2. Saturation-like region\nFor\n\\[\nV_{in}>V_{th},\\qquad V_{out}\\ge V_{in}-V_{th}\n\\]\nM2 operates in saturation while M1 operates in triode, but the series stack acts as a saturated equivalent NMOS. Its current is\n\\[\nI_D=\\frac{\\beta}{4}(V_{in}-V_{th})^2\n\\]\nThus\n\\[\nV_{out}=V_{DD}-I_D R_D\n\\]\n\\[\n\\boxed{V_{out}=V_{DD}-\\frac{\\beta R_D}{4}(V_{in}-V_{th})^2}\n\\]\nThis region gives the high-gain/inverting part of the transfer characteristic.\n\n### 3. Triode-like region\nFor\n\\[\nV_{in}>V_{th},\\qquad V_{out}<V_{in}-V_{th}\n\\]\nboth M1 and M2 are in triode, and the equivalent pull-down device is also in triode. KCL gives\n\\[\n\\frac{\\beta}{2}\\left[(V_{in}-V_{th})V_{out}-\\frac{V_{out}^2}{2}\\right]\n=\n\\frac{V_{DD}-V_{out}}{R_D}\n\\]\nRearranging,\n\\[\n\\boxed{\nV_{out}^2-\n\\left(2(V_{in}-V_{th})+\\frac{4}{\\beta R_D}\\right)V_{out}\n+\\frac{4V_{DD}}{\\beta R_D}=0\n}\n\\]\nChoose the physically meaningful smaller positive root. As \\(V_{in}\\) increases, \\(V_{out}\\) decreases toward a low value but is not exactly zero unless \\(V_{DD}=0\\) or \\(I_D=0\\).\n\n## Voltage transfer characteristic\nThe circuit therefore behaves as an **inverter**:\n- \\(V_{in}\\) low \\(\\Rightarrow\\) \\(V_{out}\\approx V_{DD}\\) (logic HIGH)\n- \\(V_{in}\\) high \\(\\Rightarrow\\) \\(V_{out}\\) low (logic LOW)\n\nThe two-transistor stack reduces the pull-down current and makes the effective NMOS weaker than a single device of the same \\(W/L\\), since\n\\[\n\\beta_{\\text{eff}}=\\frac{\\beta}{2}\n\\]\nThis lowers the current drive and changes the switching threshold/noise margins compared with a single-NMOS inverter.\n\n## Small-signal note\nIn the saturation-like region, the equivalent small-signal transconductance is\n\\[\ng_m=\\frac{\\beta}{2}(V_{in}-V_{th})\n\\]\nso the low-frequency voltage gain, neglecting output resistance, is approximately\n\\[\nA_v=\\frac{dV_{out}}{dV_{in}}\\approx -g_m R_D\n=\n-\\frac{\\beta R_D}{2}(V_{in}-V_{th})\n\\]\n\nThus the circuit is a **resistive-load NMOS inverter using a stacked driver**, useful for understanding series-NMOS logic and the effect of transistor stacking on current drive and logic threshold.",
        "format": "markdown",
        "sha256": "3477f5caf07e34ac8b02b49a49e81436eeb0e203fed13f72b14867d46060556e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the common-gate series stack and the lower-triode/upper-saturation operation. For identical devices, its β_eff = β/2 result is equivalent to an effective channel length of about 2L at the same width, matching the key conclusion; the VTC analysis is consistent with its stated ideal assumptions.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 763,
        "output_tokens": 20036,
        "total_tokens": 20799,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19179,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 763,
        "output_tokens": 20036,
        "total_tokens": 20799,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19179,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the two MOSFETs are enhancement-mode n-channel devices with the same parameters \\(k=\\mu_n C_{ox}W/L\\) and threshold \\(V_{th}\\), and neglecting body effect and channel-length modulation, the circuit is a **resistor-loaded NMOS inverter with a two-transistor stacked driver**.\n\nLet  \n- \\(M_1\\): lower NMOS, source grounded, drain at \\(V_x\\)  \n- \\(M_2\\): upper NMOS, source at \\(V_x\\), drain at \\(V_{out}\\)  \n- Both gates are tied to \\(V_{in}\\).\n\n### 1. Cutoff region: \\(V_{in}<V_{th}\\)\nBoth transistors are off, so\n\\[\nI_D=0,\\qquad V_{out}=V_{DD}.\n\\]\nThus the output high level is\n\\[\nV_{OH}=V_{DD}.\n\\]\n\n### 2. Conduction region: \\(V_{in}>V_{th}\\)\nFor current to flow, \\(M_2\\) must be on:\n\\[\nV_{GS2}=V_{in}-V_x>V_{th}\n\\]\nso\n\\[\nV_x<V_{in}-V_{th}.\n\\]\nTherefore \\(M_1\\) has\n\\[\nV_{DS1}=V_x<V_{in}-V_{th}=V_{GS1}-V_{th},\n\\]\nso \\(M_1\\) operates in the **triode** region whenever current flows. \\(M_2\\) is initially in **saturation**.\n\nEquate the drain currents:\n\\[\nI_D=k\\left[(V_{in}-V_{th})V_x-\\frac{V_x^2}{2}\\right]\n=\\frac{k}{2}(V_{in}-V_x-V_{th})^2.\n\\]\nSolving gives\n\\[\nV_x=(V_{in}-V_{th})\\left(1-\\frac{1}{\\sqrt{2}}\\right).\n\\]\nThen\n\\[\nI_D=\\frac{k}{4}(V_{in}-V_{th})^2\n\\]\nand\n\\[\nV_{out}=V_{DD}-I_DR_D\n=V_{DD}-\\frac{kR_D}{4}(V_{in}-V_{th})^2.\n\\]\nThis is valid while \\(M_2\\) remains saturated:\n\\[\nV_{out}\\ge V_{in}-V_{th}.\n\\]\nThe boundary occurs at\n\\[\nV_{in,e}=V_{th}+\\frac{2\\left(\\sqrt{1+kR_DV_{DD}}-1\\right)}{kR_D}.\n\\]\n\nFor \\(V_{in}>V_{in,e}\\), \\(M_2\\) also enters the triode region. Then \\(V_{out}\\) must be found from the coupled triode equations:\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\\frac{k}{2}\\left[2(V_{in}-V_{th})V_x-V_x^2\\right]\n\\]\nand\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\\frac{k}{2}\\left[2(V_{in}-V_x-V_{th})(V_{out}-V_x)-(V_{out}-V_x)^2\\right].\n\\]\nA useful low-output approximation is\n\\[\nV_x\\approx \\frac{V_{out}}{2},\n\\qquad\nV_{out}\\approx \\frac{V_{DD}}{1+\\frac{kR_D}{2}(V_{in}-V_{th})}.\n\\]\nThus for \\(V_{in}=V_{DD}\\),\n\\[\nV_{OL}\\approx \\frac{V_{DD}}{1+\\frac{kR_D}{2}(V_{DD}-V_{th})}.\n\\]\n\n### Summary of DC operation\n| Region | Condition | Output |\n|---|---|---|\n| Cutoff | \\(V_{in}<V_{th}\\) | \\(V_{out}=V_{DD}\\) |\n| \\(M_2\\) saturated | \\(V_{th}<V_{in}<V_{in,e}\\) | \\(V_{out}=V_{DD}-\\frac{kR_D}{4}(V_{in}-V_{th})^2\\) |\n| Both triode | \\(V_{in}>V_{in,e}\\) | \\(V_{out}\\) low, found from coupled equations above |\n\nThe circuit therefore behaves as an inverter, but the stacked NMOS driver reduces the pull-down current, increases the effective switching threshold, and lowers leakage compared with a single-NMOS inverter. If body effect is included, the threshold of \\(M_2\\) increases as \\(V_x\\) rises, making the switching threshold even higher.",
        "format": "markdown",
        "sha256": "be76f4a60f26dd5dfb0b5c06f897721267f06f7a194455d6845f4a6ab6ad04e7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the common-gate NMOS stack and the lower-device triode/upper-device saturation behavior, with largely coherent DC analysis. But it misses the essential conclusion that the stack acts approximately like one NMOS with effective length L1+L2 (about 2L for identical devices), replacing it with an inverter and leakage interpretation.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 761,
        "output_tokens": 20508,
        "total_tokens": 21269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14852,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 761,
        "output_tokens": 20508,
        "total_tokens": 21269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14852,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming both MOSFETs are enhancement-mode NMOS and operate in saturation (body effect and channel-length modulation neglected for first-order analysis):\n\n## 1. Circuit topology\n\n- \\(M_1\\): input transistor. Its drain is tied to \\(V_{DD}\\) (ac ground), so it operates as a **source follower / common-drain** stage.\n- \\(M_2\\): cascode transistor. Its gate is at a fixed dc bias \\(V_b\\), and its source is the common source node, so it operates as a **common-gate** stage.\n- \\(I_1\\): sets the total bias current of the two transistors.\n- \\(R_D\\): converts the signal current from \\(M_2\\) into an output voltage.\n\nThe overall configuration is a **source-follower + common-gate amplifier**, sometimes viewed as a cascoded current buffer.\n\n## 2. DC analysis\n\nLet the common source node voltage be \\(V_S\\).\n\nFor \\(M_1\\) in saturation:\n\\[\nI_{D1}=\\frac12 k_1(V_{in}-V_S-V_{TH})^2\n\\]\n\nFor \\(M_2\\) in saturation:\n\\[\nI_{D2}=\\frac12 k_2(V_b-V_S-V_{TH})^2\n\\]\n\nKCL at the common source node:\n\\[\nI_{D1}+I_{D2}=I_1\n\\]\n\nAt the output node, the current through \\(R_D\\) equals \\(I_{D2}\\):\n\\[\nI_{D2}=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\nThus the dc output voltage is:\n\\[\nV_{out}=V_{DD}-I_{D2}R_D\n\\]\n\nSaturation conditions:\n\\[\nV_{in}-V_S > V_{TH}, \\qquad V_{DD}-V_S > V_{in}-V_S-V_{TH}\n\\]\n\\[\nV_b-V_S > V_{TH}, \\qquad V_{out}-V_S > V_b-V_S-V_{TH}\n\\]\n\n## 3. Small-signal analysis\n\nDefine:\n\\[\ng_{m1}=\\sqrt{2k_1I_{D1}}, \\qquad g_{m2}=\\sqrt{2k_2I_{D2}}\n\\]\n\nNeglecting \\(r_o\\) and body effect, the small-signal drain currents are:\n\\[\ni_{d1}=g_{m1}(v_{in}-v_s)\n\\]\n\\[\ni_{d2}=g_{m2}(0-v_s)=-g_{m2}v_s\n\\]\n\nKCL at the common source node gives:\n\\[\ni_{d1}+i_{d2}=0\n\\]\n\\[\ng_{m1}(v_{in}-v_s)-g_{m2}v_s=0\n\\]\n\\[\nv_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}v_{in}\n\\]\n\nAt the output:\n\\[\nv_{out}=-i_{d2}R_D\n\\]\n\\[\nv_{out}=g_{m2}v_sR_D\n\\]\n\\[\nv_{out}=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\\,v_{in}\n\\]\n\nSo the small-signal voltage gain is:\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}\n=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D}\n\\]\n\nIf \\(g_{m1}=g_{m2}=g_m\\), then:\n\\[\nA_v\\approx \\frac{g_mR_D}{2}\n\\]\n\nThe gain is **non-inverting**, because the source follower does not invert and the common-gate stage also does not invert from source to drain.\n\nIncluding body effect, the denominator becomes \\(g_{m1}+g_{mb1}+g_{m2}+g_{mb2}\\), and the numerator contains \\(g_{m2}+g_{mb2}\\).\n\n## 4. Input and output resistance\n\n- Input resistance:\n\\[\nR_{in}\\approx \\infty\n\\]\nbecause the input is applied to the MOS gate.\n\n- Output resistance, neglecting \\(r_o\\):\n\\[\nR_{out}\\approx R_D\n\\]\nWith channel-length modulation, \\(M_2\\) raises the output resistance because it is a common-gate cascode device, but \\(R_D\\) often dominates at low frequency.\n\n## Summary\n\nThe circuit is a source-follower/common-gate amplifier.  \nIts main features are:\n\n- high input resistance,\n- non-inverting voltage gain,\n- bias current set by \\(I_1\\),\n- output voltage developed across \\(R_D\\),\n- first-order gain:\n\\[\n\\boxed{A_v=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D}\n\\]",
        "format": "markdown",
        "sha256": "54e51c4da31ee907d3d1d48226357be582ae11456e86517c1e6b16f2b184cb45"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower driving a common-gate topology and gives the correct non-inverting gain. The full-credit rule applies; minor terminology imprecision does not change the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1040,
        "output_tokens": 27032,
        "total_tokens": 28072,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22639,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1040,
        "output_tokens": 27032,
        "total_tokens": 28072,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22639,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **single-ended MOS source-coupled amplifier**: M1 is a source-follower input stage, and M2 is a common-gate output stage. The tail current source \\(I_1\\) biases both transistors, and \\(V_b\\) is the DC gate bias for M2. The output is taken from M2 drain through \\(R_D\\), while M1 drain is tied to \\(V_{DD}\\) (AC ground).\n\n### DC Bias\nFor M1 and M2 in saturation:\n\\[\nI_{D1}=\\frac12 k_n\\frac{W}{L}(V_{in}-V_S-V_{TH})^2\n\\]\n\\[\nI_{D2}=\\frac12 k_n\\frac{W}{L}(V_b-V_S-V_{TH})^2\n\\]\nwhere \\(V_S\\) is the common source voltage. KCL at the source node gives:\n\\[\nI_{D1}+I_{D2}=I_1\n\\]\nSolving gives \\(V_S\\), then:\n\\[\nV_{out}=V_{DD}-I_{D2}R_D\n\\]\n\nIf matched and \\(V_{in}=V_b\\):\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2}\n\\]\n\\[\nV_{out}=V_{DD}-\\frac{I_1R_D}{2}\n\\]\n\nSaturation condition for M2:\n\\[\nV_{out}>V_b-V_{TH}\n\\]\nOtherwise M2 enters triode.\n\n### Small-Signal Gain\nNeglecting channel-length modulation and body effect, and assuming an ideal tail current source:\n\\[\nv_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}v_{in}\n\\]\n\\[\nv_o=g_{m2}v_sR_D\n\\]\nTherefore:\n\\[\nA_v=\\frac{v_o}{v_{in}}\n=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\n\\]\nIf \\(M_1\\) and \\(M_2\\) are matched, \\(g_{m1}=g_{m2}=g_m\\):\n\\[\nA_v=\\frac{g_mR_D}{2}\n\\]\nThe gain from \\(V_{in}\\) to \\(V_{out}\\) is **non-inverting**. If \\(V_b\\) is also used as a signal input, the output depends on \\(v_{in}-v_b\\), so the stage behaves as a single-ended-output differential pair.\n\n### Output Resistance\nAt low frequency:\n\\[\nR_{out}\\approx R_D \\parallel R_{o2}\n\\]\nFor the common-gate device M2, with source resistance approximately \\(1/g_{m1}\\):\n\\[\nR_{o2}\\approx r_{o2}\\left(1+\\frac{g_{m2}}{g_{m1}}\\right)\n\\]\nIf channel-length modulation is neglected, \\(R_{out}\\approx R_D\\). The input resistance at \\(V_{in}\\) is very high because it is a MOS gate.\n\n### Summary\n- **M1**: converts \\(V_{in}\\) to a source-node voltage; acts as a source follower.\n- **M2**: common-gate stage that amplifies the source-node signal and produces \\(V_{out}\\) across \\(R_D\\).\n- **Gain**: approximately \\(g_mR_D/2\\) for matched devices, non-inverting.\n- **Main use**: single-ended differential-input amplifier or source-follower/common-gate amplifier.",
        "format": "markdown",
        "sha256": "15f8e91580f6b042d5b98190b3205fff82e38f0ec2f8682ccedc9b3f59b696b7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower driving M2 as a common-gate stage, with the shared-source bias and output at M2’s drain. The non-inverting gain expression is also correct; minor optional output-resistance details do not affect the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1042,
        "output_tokens": 23337,
        "total_tokens": 24379,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1042,
        "output_tokens": 23337,
        "total_tokens": 24379,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a two-transistor NMOS amplifier: **M₁ is a source follower (common-drain) input stage**, and **M₂ is a common-gate output stage**. The tail current source \\(I_1\\) biases both transistors, and \\(R_D\\) converts M₂’s drain current into an output voltage.\n\n## 1. DC operating point\n\nLet the common-source node be \\(V_X\\). Assuming M₁ and M₂ are in saturation and neglecting body effect and channel-length modulation,\n\n\\[\nI_1=I_{D1}+I_{D2}\n\\]\n\n\\[\nI_{D1}=\\frac12 k_{n1}(V_{in}-V_X-V_{TH})^2\n\\]\n\n\\[\nI_{D2}=\\frac12 k_{n2}(V_b-V_X-V_{TH})^2\n\\]\n\nwhere \\(k_n=\\mu_n C_{ox}W/L\\). Solving these gives \\(V_X\\), then\n\n\\[\nV_{out}=V_{DD}-I_{D2}R_D\n\\]\n\nFor matched devices and \\(V_{in}=V_b\\), the currents are equal:\n\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2}\n\\]\n\nand\n\n\\[\nV_{out}=V_{DD}-\\frac{I_1}{2}R_D\n\\]\n\nSaturation conditions:\n\n\\[\nV_{DD}>V_{in}-V_{TH1}\n\\]\n\n\\[\nV_{out}>V_b-V_{TH2}\n\\]\n\n## 2. Small-signal voltage gain\n\nUsing the small-signal model and assuming ideal tail current source and \\(r_o\\to\\infty\\):\n\n- M₁: \\(i_{d1}=g_{m1}(v_{in}-v_x)\\)\n- M₂: \\(i_{d2}=g_{m2}(v_b-v_x)\\)\n\nAt node \\(X\\), KCL gives\n\n\\[\ng_{m1}(v_{in}-v_x)+g_{m2}(v_b-v_x)=0\n\\]\n\n\\[\nv_x=\\frac{g_{m1}v_{in}+g_{m2}v_b}{g_{m1}+g_{m2}}\n\\]\n\nAt the output node,\n\n\\[\n\\frac{v_{out}}{R_D}+g_{m2}(v_b-v_x)=0\n\\]\n\nso\n\n\\[\nv_{out}=\\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}}(v_{in}-v_b)\n\\]\n\nIf \\(V_b\\) is a DC bias and only \\(V_{in}\\) is the small-signal input, then \\(v_b=0\\):\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}}\n\\]\n\nIf the transistors are matched, \\(g_{m1}=g_{m2}=g_m\\),\n\n\\[\nA_v=\\frac12 g_m R_D\n\\]\n\nThe gain is **non-inverting**. Compared with a common-source stage \\(A_v=-g_mR_D\\), the magnitude is lower, but there is no Miller multiplication from input to output.\n\n## 3. Input and output resistance\n\n- Input resistance:  \n  \\[\n  R_{in}\\approx \\infty\n  \\]\n  since the input is the gate of M₁.\n\n- Output resistance:  \n  With \\(r_o\\) neglected,\n  \\[\n  R_{out}\\approx R_D\n  \\]\n  More accurately, including channel-length modulation,\n  \\[\n  R_{out}\\approx R_D \\parallel r_{o2}\\left(1+\\frac{g_{m2}}{g_{m1}}\\right)\n  \\]\n  for the common-gate device M₂, because its source sees approximately \\(1/g_{m1}\\) from M₁.\n\n## 4. Role of each device\n\n- **M₁** is a source follower: high input impedance, level shifts the input to the common-source node.\n- **M₂** is a common-gate amplifier: its source is driven by M₁, and its drain produces the output.\n- **I₁** sets the total bias current and, if \\(V_b\\) is also driven differentially, the circuit behaves as a single-ended-output differential pair.\n\nIf body effect is included, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\) and \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\) in the denominator of the source-node expression for a more accurate first-order gain.",
        "format": "markdown",
        "sha256": "ff777eb412cc53420e6624631abd99878152a7c36d65a28b7bfa198ebeaeec70"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as a source follower driving M₂ as a common-gate stage, with the output at M₂’s drain, and gives the correct non-inverting gain. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1040,
        "output_tokens": 24227,
        "total_tokens": 25267,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1040,
        "output_tokens": 24227,
        "total_tokens": 25267,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For output impedance, the input \\(V_{\\text{in}}\\) is set to ac ground. The output node is the source of \\(M_1\\), and \\(M_1\\) acts as a source follower whose gate is not directly ac-grounded because of \\(R_S\\). The important small-signal elements are \\(R_S\\), \\(C_{gs1}\\), \\(g_{m1}\\), and the output resistances of \\(M_1\\) and \\(M_2\\).\n\nLet a small test voltage \\(v_o\\) be applied at \\(V_{\\text{out}}\\). KCL at the gate of \\(M_1\\) gives\n\\[\n\\frac{v_g}{R_S}+sC_{gs1}(v_g-v_o)=0\n\\]\nso\n\\[\nv_g=\\frac{sR_SC_{gs1}}{1+sR_SC_{gs1}}v_o .\n\\]\nThus the gate–source voltage of \\(M_1\\) is\n\\[\nv_{gs1}=v_g-v_o=-\\frac{v_o}{1+sR_SC_{gs1}}.\n\\]\nSolving the small-signal equivalent (neglecting \\(r_{o1},r_{o2}\\) for simplicity) gives the output impedance\n\\[\nZ_{\\text{out}}\\approx \\frac{1+sR_SC_{gs1}}{g_{m1}+sC_{gs1}}\n      = \\frac{1}{g_{m1}}\\,\n        \\frac{1+j\\omega R_SC_{gs1}}{1+j\\omega C_{gs1}/g_{m1}}.\n\\]\nThe phase of \\(Z_{\\text{out}}\\) is therefore\n\\[\n\\angle Z_{\\text{out}}\n=\\tan^{-1}(\\omega R_SC_{gs1})\n-\\tan^{-1}\\!\\left(\\frac{\\omega C_{gs1}}{g_{m1}}\\right).\n\\]\nIf\n\\[\nR_S>\\frac{1}{g_{m1}},\n\\]\nthis phase is positive over a range of frequencies, so the output impedance has an inductive reactance: the voltage leads the current, equivalent to \\(Z_{\\text{out}}\\approx R+j\\omega L_{\\text{eff}}\\), with\n\\[\nL_{\\text{eff}}\\sim \\frac{R_SC_{gs1}}{g_{m1}}.\n\\]\n\nPhysically, \\(C_{gs1}\\) couples the output voltage to the gate, and \\(R_S\\) delays the resulting gate voltage. This makes the small-signal drain current of \\(M_1\\) lag the output voltage, producing an inductive output impedance. So the circuit can exhibit an inductive output impedance due to the \\(R_S-C_{gs1}\\) feedback/bootstrapping path in \\(M_1\\), especially at high frequencies where \\(C_{gs1}\\) is no longer negligible.",
        "format": "markdown",
        "sha256": "639cb66abba8617e67dd62738edd26ff5d2fafe6dbba4f197ff4f3eb012c47bd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the relevant output-impedance expression. It shows the positive-phase, inductive range occurs when R_S > 1/g_m1 and explains the role of C_gs1 and R_S. The effective-inductance estimate is rough, but does not undermine the conclusion.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 818,
        "output_tokens": 14849,
        "total_tokens": 15667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 818,
        "output_tokens": 14849,
        "total_tokens": 15667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The inductive behavior comes from the capacitive feedback through the gate–source capacitance \\(C_{gs}\\) of \\(M_1\\) together with the gate resistance \\(R_S\\).\n\nFor small-signal output-impedance analysis, the input is ac-grounded, so the gate of \\(M_1\\) is returned to ground through \\(R_S\\). The output node is at the source of \\(M_1\\) (source-follower/common-drain connection with a current-source load \\(M_2\\)). A small change in the output voltage \\(v_x\\) drives a current through \\(C_{gs}\\) into the gate node. That current develops a gate voltage\n\\[\nv_g = v_x\\frac{sR_S C_{gs}}{1+sR_S C_{gs}}.\n\\]\nThis gate voltage then modulates the transistor current, producing an additional component in the output admittance:\n\\[\nY_{out}=G_L+sC_L+\\frac{g_m+sC_{gs}}{1+sR_S C_{gs}}.\n\\]\nAt low to moderate frequencies, expanding this gives\n\\[\nY_{out}\\approx (G_L+g_m)+j\\omega\\bigl[C_L+C_{gs}(1-g_mR_S)\\bigr].\n\\]\nIf \\(g_mR_S>1\\), the effective susceptance term becomes negative over a range of frequencies. A negative susceptance is equivalent to an inductive reactance, so the output impedance\n\\[\nZ_{out}=\\frac{1}{Y_{out}}\n\\]\nhas a positive imaginary part; i.e., it looks inductive. Physically, the feedback through \\(C_{gs}\\) and \\(R_S\\) makes the transistor current lead the output voltage, mimicking an inductor.\n\nThus the output impedance can be inductive because the capacitor \\(C_{gs}\\) and resistor \\(R_S\\) form a feedback path that produces a phase-leading current at the output.",
        "format": "markdown",
        "sha256": "e898ef189b3e9a85a391aa1a6ea8da82f4815cc3b9a063cc1dea6c21ee91a761"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The source-follower analysis and inductive condition \\(g_mR_S>1\\) are essentially correct. However, it omits the explicit low-to-high-frequency impedance transition, and its final claim that output current leads voltage is backwards for an inductive impedance; with the added \\(C_L\\), the negative-susceptance condition also depends on that load.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 768,
        "input_tokens": 818,
        "output_tokens": 32250,
        "total_tokens": 33068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27630,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 768,
        "input_tokens": 818,
        "output_tokens": 32250,
        "total_tokens": 33068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27630,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a source follower \\(M_1\\) with a resistive gate drive \\(R_S\\), loaded by a current-sink \\(M_2\\). For output impedance, the input \\(V_{\\rm in}\\) is AC-grounded, so the gate of \\(M_1\\) sees \\(R_S\\) to ground; \\(M_2\\) is replaced by its small-signal output resistance \\(r_{o2}\\). The inductive behavior comes from the \\(R_S-C_{gs}\\) feedback around \\(M_1\\).\n\nSmall-signal analysis (neglecting \\(r_{o1},r_{o2}\\) for simplicity):\n- Let \\(v_o\\) be the test voltage at the output node.\n- The gate voltage is not zero because \\(C_{gs}\\) couples \\(v_o\\) to the gate through \\(R_S\\). KCL at the gate gives\n\\[\nsC_{gs}(v_o-v_g)=\\frac{v_g}{R_S}\n\\quad\\Rightarrow\\quad\nv_g=\\frac{sR_SC_{gs}}{1+sR_SC_{gs}}v_o\n\\]\nso\n\\[\nv_{gs}=v_g-v_o=-\\frac{v_o}{1+sR_SC_{gs}}.\n\\]\n- KCL at the output node gives the small-signal output admittance\n\\[\nY_{\\rm out}=\\frac{i_o}{v_o}\n\\approx\n\\frac{g_m+sC_{gs}}{1+sR_SC_{gs}}.\n\\]\nThus\n\\[\nZ_{\\rm out}=\\frac{v_o}{i_o}\n\\approx\n\\frac{1+sR_SC_{gs}}{g_m+sC_{gs}}\n=\n\\frac{1}{g_m}\n\\frac{1+sR_SC_{gs}}{1+sC_{gs}/g_m}.\n\\]\n\nThis expression has a zero at\n\\[\n\\omega_z=\\frac{1}{R_SC_{gs}}\n\\]\nand a pole at\n\\[\n\\omega_p=\\frac{g_m}{C_{gs}}.\n\\]\nSince normally \\(R_S>1/g_m\\), the zero occurs before the pole:\n\\[\n\\omega_z < \\omega_p.\n\\]\nIn the frequency range\n\\[\n\\frac{1}{R_SC_{gs}}<\\omega<\\frac{g_m}{C_{gs}},\n\\]\nthe output impedance is approximately\n\\[\nZ_{\\rm out}\\approx \\frac{sR_SC_{gs}}{g_m}\n= j\\omega \\frac{R_SC_{gs}}{g_m}\n= j\\omega L_{\\rm eq},\n\\]\nwhere\n\\[\nL_{\\rm eq}=\\frac{R_SC_{gs}}{g_m}.\n\\]\nSo the output impedance has a positive reactance, i.e. it behaves inductively.\n\nPhysically, \\(C_{gs}\\) couples the output signal to the gate, but \\(R_S\\) prevents the gate voltage from following the source instantaneously. The resulting feedback through \\(R_S\\) and \\(C_{gs}\\) makes the transistor current lag the output voltage; equivalently, the output admittance has a negative susceptance over a band of frequencies. \\(M_2\\) merely provides bias current and a parallel resistance, so it does not create the inductance but can damp it.",
        "format": "markdown",
        "sha256": "36d0ac5be5aeede64854c2291b5afe481d384128436b3e1e34ecef1d7599ca85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the right output-impedance expression. It explains that the gate-source capacitance and gate resistance create a zero-before-pole region when RS > 1/gm, giving inductive behavior. The stated inductance is a midband approximation and does not change the central conclusion.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 818,
        "output_tokens": 14138,
        "total_tokens": 14956,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13490,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 818,
        "output_tokens": 14138,
        "total_tokens": 14956,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13490,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming both MOSFETs are enhancement-mode NMOS and operate in saturation, the circuit is a current-input/voltage-output (transresistance) amplifier with feedback through \\(M_2\\).\n\nLet  \n\\[\nK_1=\\frac12 \\mu_n C_{ox}\\left(\\frac WL\\right)_1,\\qquad\nK_2=\\frac12 \\mu_n C_{ox}\\left(\\frac WL\\right)_2\n\\]\n\n## 1. DC analysis\n\nAt node \\(X\\), the gate currents are zero, so\n\\[\nI_{D2}=I_{in}\n\\]\nFor \\(M_2\\) in saturation,\n\\[\nI_{in}=K_2(V_{out}-V_{TH})^2\n\\]\n\\[\n\\boxed{V_{out}=V_{TH}+\\sqrt{\\frac{I_{in}}{K_2}}}\n\\]\n\nThe current through \\(R_{D1}\\) is also the drain current of \\(M_1\\):\n\\[\nI_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}}\n\\]\nFor \\(M_1\\) in saturation,\n\\[\nI_{D1}=K_1(V_X-V_{TH})^2\n\\]\n\\[\n\\boxed{V_X=V_{TH}+\\sqrt{\\frac{I_{D1}}{K_1}}}\n\\]\n\nSaturation checks:\n\\[\nM_1:\\quad V_{out}>V_X-V_{TH}\n\\]\n\\[\nM_2:\\quad V_X>V_{out}-V_{TH}\n\\]\n\n## 2. Small-signal analysis\n\nSmall-signal parameters:\n\\[\ng_{m1}=\\sqrt{2\\mu_n C_{ox}\\left(\\frac WL\\right)_1 I_{D1}}\n\\]\n\\[\ng_{m2}=\\sqrt{2\\mu_n C_{ox}\\left(\\frac WL\\right)_2 I_{in}}\n\\]\n\nNeglecting channel-length modulation initially:\n\\[\ni_{in}=g_{m2}v_{out}\n\\]\n\\[\ng_{m1}v_X+\\frac{v_{out}}{R_{D1}}=0\n\\]\nThus\n\\[\n\\boxed{\\frac{v_{out}}{i_{in}}=\\frac{1}{g_{m2}}}\n\\]\nand\n\\[\n\\boxed{v_X=-\\frac{v_{out}}{g_{m1}R_{D1}}}\n\\]\nso the input resistance at node \\(X\\) is\n\\[\n\\boxed{R_{in}=\\frac{v_X}{i_{in}}\n=-\\frac{1}{g_{m1}g_{m2}R_{D1}}}\n\\]\n\nIncluding \\(r_{o1},r_{o2}\\), let\n\\[\nR_D=R_{D1}\\parallel r_{o1}\n\\]\nThen\n\\[\ni_{in}=g_{m2}v_{out}+\\frac{v_X}{r_{o2}}\n\\]\n\\[\ng_{m1}v_X+\\frac{v_{out}}{r_{o1}}+\\frac{v_{out}}{R_{D1}}=0\n\\]\nSolving gives\n\\[\n\\boxed{\\frac{v_{out}}{i_{in}}\n=\n\\frac{1}{g_{m2}-\\frac{1}{g_{m1}R_D r_{o2}}}\n\\approx \\frac{1}{g_{m2}}}\n\\]\n\\[\n\\boxed{R_{in}\n=\n\\frac{1}{\\frac{1}{r_{o2}}-g_{m1}g_{m2}R_D}}\n\\]\nand the output resistance with the input current source opened is\n\\[\n\\boxed{R_{out}\n=\n\\frac{1}{\\frac{1}{R_{D1}}+\\frac{1}{r_{o1}}-g_{m1}g_{m2}r_{o2}}\n=\n\\frac{R_D}{1-g_{m1}g_{m2}r_{o2}R_D}}\n\\]\n\n## Summary\n\n- \\(M_2\\) forces \\(I_{D2}=I_{in}\\), so \\(V_{out}\\) is set mainly by \\(I_{in}\\) and \\(M_2\\):\n  \\[\n  V_{out}\\approx V_{TH}+\\sqrt{\\frac{I_{in}}{K_2}}\n  \\]\n- \\(M_1\\) and \\(R_{D1}\\) establish the dc bias at \\(X\\):\n  \\[\n  V_X\\approx V_{TH}+\\sqrt{\\frac{(V_{DD}-V_{out})/R_{D1}}{K_1}}\n  \\]\n- The closed-loop small-signal transresistance is approximately\n  \\[\n  \\frac{v_{out}}{i_{in}}\\approx \\frac{1}{g_{m2}}\n  \\]\n- The circuit has a regenerative/negative input-resistance characteristic:\n  \\[\n  R_{in}\\approx -\\frac{1}{g_{m1}g_{m2}R_{D1}}\n  \\]\n  so it should be driven by a current source; stability must be verified if the source has finite output resistance.",
        "format": "markdown",
        "sha256": "940b7e0781479234d41fafdd73f0d3452e74d20dddff49ecd5fd0f581e8a4a65"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The equations correctly treat M2 as controlled by Vout and capture the regenerative M1–M2 loop, including the correct negative input-resistance expression. This meets the golden solution’s full-credit rule; explicit discussion of latching is not required.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1049,
        "output_tokens": 31806,
        "total_tokens": 32855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27492,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1049,
        "output_tokens": 31806,
        "total_tokens": 32855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27492,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming both MOSFETs are enhancement NMOS, matched, and biased in saturation.\n\n## 1. DC analysis\n\nLet  \n\\[\nI_{D1}=I_{D}(M_1),\\qquad I_{D2}=I_{D}(M_2)\n\\]\nand let \\(K_n=\\frac12\\mu_n C_{ox}(W/L)\\) for each device.\n\nAt node \\(X\\):\n\\[\nI_{D2}=I_{in}\n\\]\nsince the current source \\(I_{in}\\) supplies the drain current of \\(M_2\\).\n\nAt the output node:\n\\[\nI_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}}\n\\]\n\nUsing the square-law model for \\(M_2\\) (neglecting channel-length modulation for DC):\n\\[\nI_{D2}=K_n(V_{out}-V_{TH})^2\n\\]\nso\n\\[\nV_{out}=V_{TH}+\\sqrt{\\frac{2I_{in}}{K_n}}\n\\]\nThen\n\\[\nI_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}}\n\\]\nand \\(V_X\\) is\n\\[\nV_X=V_{TH}+\\sqrt{\\frac{2I_{D1}}{K_n}}\n\\]\n\nSaturation conditions are approximately\n\\[\nV_{out}>V_X-V_{TH},\\qquad V_X>V_{out}-V_{TH}\n\\]\n\n## 2. Small-signal analysis\n\nLet \\(g_{m1},g_{m2}\\) be the transconductances and \\(g_{d1},g_{d2}\\) the output conductances of \\(M_1,M_2\\), respectively.\n\nSmall-signal model:\n\\[\nv_x=v_{gs1},\\qquad v_{out}=v_{ds1}\n\\]\n\\[\ng_{m1}=\\sqrt{2K_nI_{D1}},\\qquad g_{m2}=\\sqrt{2K_nI_{in}}\n\\]\n\nKCL at the output node:\n\\[\ng_{m1}v_x+\\left(g_{d1}+\\frac1{R_{D1}}\\right)v_{out}=0\n\\]\n\nKCL at node \\(X\\):\n\\[\ng_{m2}v_{out}+g_{d2}v_x=i_{in}\n\\]\n\nSolving these two equations gives the small-signal transresistance:\n\\[\n\\boxed{\n\\frac{v_{out}}{i_{in}}\n=\n\\frac{1}{\ng_{m2}-\\dfrac{g_{d2}}{g_{m1}}\n\\left(g_{d1}+\\dfrac1{R_{D1}}\\right)\n}\n}\n\\]\n\nIf channel-length modulation is neglected, \\(g_{d1}=g_{d2}=0\\), so\n\\[\n\\boxed{\\frac{v_{out}}{i_{in}}\\approx \\frac{1}{g_{m2}}}\n\\]\n\nThus the circuit converts the input current \\(I_{in}\\) to an output voltage \\(V_{out}\\), with \\(M_2\\) acting as the current-to-voltage feedback device and \\(M_1\\) setting the bias current through \\(R_{D1}\\).",
        "format": "markdown",
        "sha256": "4720c2db6ae9756f3ca402f7dbd599feb20ab24dcfe75e274f3d331c720c4ce0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer correctly models M2 as controlled by Vout and includes the M1–M2 coupling in its small-signal equations. But it misses the key positive-feedback consequence—negative input resistance and an unstable, potentially latching bias—and instead presents the circuit as a linear current-to-voltage converter.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1049,
        "output_tokens": 21401,
        "total_tokens": 22450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18057,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1049,
        "output_tokens": 21401,
        "total_tokens": 22450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18057,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming enhancement-mode NMOS transistors, sources grounded, and the output feedback wire is connected to the gate of \\(M_2\\), the connections are\n\n\\[\nM_1:\\; V_{G1}=V_X,\\quad V_{D1}=V_O=V_{\\rm out},\\quad V_{S1}=0\n\\]\n\\[\nM_2:\\; V_{G2}=V_O,\\quad V_{D2}=V_X,\\quad V_{S2}=0\n\\]\n\nwith a current \\(I_{\\rm in}\\) injected into node \\(X\\). Thus \\(M_1\\) is a common-source stage whose input is \\(V_X\\), while \\(M_2\\) feeds \\(V_O\\) back to node \\(X\\). The pair is cross-coupled and gives positive feedback; it is not a simple current mirror as drawn.\n\n### Large-signal/dc operation\nLet  \n\\[\nK_i=\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_i\n\\]\nand use the usual MOS square-law. KCL gives\n\n\\[\nI_{D2}=I_{\\rm in},\n\\qquad\nI_{D1}=\\frac{V_{DD}-V_O}{R_{D1}}\n\\]\n(the MOS gates draw no dc current).\n\nIf both devices are in saturation and channel-length modulation is neglected,\n\n\\[\nV_O\\approx V_{T2}+\\sqrt{\\frac{2I_{\\rm in}}{K_2}},\n\\]\n\\[\nV_X\\approx V_{T1}+\\sqrt{\\frac{2(V_{DD}-V_O)}{K_1R_{D1}}}.\n\\]\n\nThese formulas are valid only while\n\\[\nV_O\\ge V_X-V_{T1}\\quad (M_1\\text{ saturated}),\n\\qquad\nV_X\\ge V_O-V_{T2}\\quad (M_2\\text{ saturated}).\n\\]\nIf \\(M_2\\) is in triode, replace the first equation by\n\\[\nI_{\\rm in}=K_2\\left[(V_O-V_{T2})V_X-\\frac{V_X^2}{2}\\right],\n\\]\nand solve together with the \\(M_1\\)/\\(R_{D1}\\) equation. Because the circuit has positive feedback, depending on bias it can have more than one operating point (hysteresis/latch behavior), especially when \\(M_2\\) operates in triode.\n\n### Small-signal analysis\nAt the operating point, define\n\\[\ng_{m1}=K_1(V_X-V_{T1}),\\qquad\ng_{m2}=K_2(V_O-V_{T2}),\n\\]\n\\[\nr_{o1}\\approx \\frac{1}{\\lambda_1 I_{D1}},\\qquad\nr_{o2}\\approx \\frac{1}{\\lambda_2 I_{\\rm in}},\n\\]\nand let\n\\[\nR_A=R_{D1}\\parallel r_{o1}\n\\]\n(include an external load \\(R_L\\) as \\(R_A=R_{D1}\\parallel R_L\\parallel r_{o1}\\)).\n\nFor small-signal perturbations \\(i_{\\rm in}\\), \\(v_x\\), \\(v_o\\), KCL at \\(X\\) and at the output gives\n\\[\ni_{\\rm in}=g_{m2}v_o+\\frac{v_x}{r_{o2}},\n\\]\n\\[\ng_{m1}v_x+\\frac{v_o}{r_{o1}}+\\frac{v_o}{R_{D1}}=0.\n\\]\nHence\n\\[\nv_o=-g_{m1}R_A\\,v_x,\n\\]\n\\[\n\\boxed{\\frac{v_o}{i_{\\rm in}}\n=\n\\frac{g_{m1}R_A}{g_{m1}g_{m2}R_A-\\frac{1}{r_{o2}}}\n=\n\\frac{g_{m1}R_A r_{o2}}{T-1}}\n\\]\nwhere\n\\[\nT=g_{m1}g_{m2}R_A\\,r_{o2}\n\\]\nis the positive-feedback loop gain. For large loop gain, the transresistance approaches approximately\n\\[\n\\frac{v_o}{i_{\\rm in}}\\approx \\frac{1}{g_{m2}}.\n\\]\n\nThe small-signal resistance seen at node \\(X\\) is\n\\[\n\\boxed{R_{\\rm in,X}\n=\n\\frac{1}{\\frac{1}{r_{o2}}-g_{m1}g_{m2}R_A}\n=\n\\frac{r_{o2}}{1-T}}.\n\\]\nFor \\(T>1\\), this resistance is negative, showing regenerative behavior.\n\nThe resistance looking into the output node, with the input current source open-circuited, is\n\\[\n\\boxed{R_{\\rm out}\n=\n\\left(\n\\frac{1}{R_{D1}}+\\frac{1}{r_{o1}}\n-g_{m1}g_{m2}r_{o2}\n\\right)^{-1}}.\n\\]\nAgain, the last term can make the differential output resistance negative if the feedback loop gain is large.\n\nThe forward voltage gain from \\(V_X\\) to \\(V_O\\) is simply that of a common-source stage:\n\\[\n\\boxed{\\frac{v_o}{v_x}=-g_{m1}R_A.}\n\\]\n\n### Practical interpretation\n- The circuit acts as a current input/voltage output stage.  \n- Because \\(M_2\\)’s gate is driven by the output, the loop through \\(M_1\\) and \\(M_2\\) is positive feedback.  \n- For \\(T<1\\), the small-signal behavior is non-regenerative.  \n- Near \\(T=1\\), the gain becomes very large/sensitive to device parameters.  \n- For \\(T>1\\), the stage is regenerative; it can behave as a latch/Schmitt-like circuit, and the simple linear amplifier model may not represent a unique stable output.  \n- A realistic numerical operating point requires \\(V_{DD}\\), \\(R_{D1}\\), \\(I_{\\rm in}\\), \\(V_T\\), and the transistor \\(K\\)’s.\n\nIf the intended circuit was actually a standard **diode-connected current mirror**—i.e. \\(M_2\\)’s gate and drain are both tied at node \\(X\\), and there is no connection from \\(V_O\\) back to \\(M_2\\)—then the analysis changes completely: to first order \\(I_{D1}\\approx (K_1/K_2)I_{\\rm in}\\), \\(V_O=V_{DD}-I_{D1}R_{D1}\\), and \\(R_{\\rm out}\\approx R_{D1}\\parallel r_{o1}\\).",
        "format": "markdown",
        "sha256": "8858f6215a31b85238c069432c0a3a57c6c8a257f5faf891237132b17a71d065"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as tied to Vout, recognizes the positive-feedback loop, and derives the loop-gain-modified negative input resistance and regenerative/latching behavior. The extra analysis does not contradict the essential result.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1049,
        "output_tokens": 49243,
        "total_tokens": 50292,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1049,
        "output_tokens": 49243,
        "total_tokens": 50292,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **two-stage CMOS transimpedance amplifier (current-to-voltage converter)** with shunt feedback.\n\n### Main components and roles\n- **M1**: common-gate input transistor. Its gate is biased by \\(V_b\\), which is an AC ground. Its source is the low-impedance input node.\n- **M2**: common-source second stage. Its gate is driven by the first-stage output node \\(X\\), and its drain is the output \\(V_{out}\\).\n- **\\(R_{D1},R_{D2}\\)**: load resistors for the first and second stages.\n- **\\(R_F\\)**: feedback resistor from the output back to the input node (source of M1). It provides negative shunt feedback.\n- **\\(I_{in}\\)**: input current source, e.g. from a photodiode or other current-mode sensor.\n- **\\(V_{DD},V_b\\)**: DC supply and bias voltage.\n\n### Qualitative operation\nThe input current \\(I_{in}\\) is applied to the source of M1. Since M1 is in a common-gate configuration, it has a low input resistance and transfers the current variation to its drain, producing a voltage at node \\(X\\). M2 then amplifies this voltage and inverts it, giving the output voltage \\(V_{out}\\).\n\nThe feedback resistor \\(R_F\\) senses \\(V_{out}\\) and feeds a current back to the input node. This negative feedback lowers the input resistance, stabilizes the transimpedance gain, and generally improves bandwidth. With sufficiently high loop gain, the input node behaves as a virtual ground, so approximately\n\\[\nV_{out}\\approx -I_{in}R_F\n\\]\nwith the sign depending on the chosen current direction.\n\n### Small-signal analysis\nNeglecting channel-length modulation \\(r_o\\) and using a simple small-signal model:\n\nLet the small-signal source voltage be \\(v_s\\). For M1,\n\\[\nv_x = g_{m1}R_{D1}v_s\n\\]\nFor M2,\n\\[\nv_o = -g_{m2}R_{D2}v_x\n= -g_{m1}g_{m2}R_{D1}R_{D2}v_s\n\\]\nDefine the open-loop gain-like factor\n\\[\nA=g_{m1}g_{m2}R_{D1}R_{D2}\n\\]\nso\n\\[\nv_o=-Av_s\n\\]\n\nKCL at the input/source node gives, for an input current \\(i_{in}\\) entering that node,\n\\[\ni_{in}=g_{m1}v_s+\\frac{v_s-v_o}{R_F}\n\\]\nSubstitute \\(v_o=-Av_s\\):\n\\[\ni_{in}=g_{m1}v_s+\\frac{v_s+Av_s}{R_F}\n=\\left(g_{m1}+\\frac{1+A}{R_F}\\right)v_s\n\\]\nThus the closed-loop transimpedance is approximately\n\\[\nZ_T=\\frac{v_o}{i_{in}}\n= -\\frac{A}{g_{m1}+\\frac{1+A}{R_F}}\n= -\\frac{A R_F}{1+A+g_{m1}R_F}\n\\]\nFor high loop gain, \\(A\\gg1\\), this reduces to\n\\[\nZ_T\\approx -R_F\n\\]\n\nSo the feedback resistor \\(R_F\\) primarily sets the current-to-voltage gain, while M1 and M2 provide the loop gain needed to make the input node low impedance and to stabilize the transfer. DC bias must be chosen so that M1 and M2 remain in saturation.",
        "format": "markdown",
        "sha256": "c77ccb882d6a6e11acc06928a72d9a440419044f220fde82df7d1f61c9ca48f1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input, forming a transimpedance amplifier. This meets the explicit full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1029,
        "output_tokens": 18637,
        "total_tokens": 19666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1029,
        "output_tokens": 18637,
        "total_tokens": 19666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **MOSFET transimpedance amplifier** (current input \\(I_{in}\\), voltage output \\(V_{out}\\)) with **shunt–shunt feedback** through \\(R_F\\).  \nM1 is a common-gate stage (current buffer), and M2 is a common-source voltage-gain stage. \\(R_F\\) feeds the output voltage back to the input node as a current.\n\n### Small-signal analysis\nAssume both MOSFETs are NMOS in saturation, \\(V_{DD}\\) is AC ground, and body effect is neglected.  \nLet\n\\[\nG_{m1}=g_{m1}+g_{mb1}\\quad \\text{(use }G_{m1}=g_{m1}\\text{ if body effect is ignored)}\n\\]\nand let \\(v_y\\), \\(v_x\\), \\(v_o\\) be the small-signal voltages at the input node, node \\(X\\), and output, respectively. \\(I_{in}\\) is the small-signal current entering the input node.\n\nKCL at node \\(X\\):\n\\[\n\\frac{v_x}{R_{D1}}-G_{m1}v_y=0\n\\]\n\\[\nv_x=G_{m1}R_{D1}v_y\n\\]\n\nKCL at the output node:\n\\[\n\\frac{v_o}{R_{D2}}+g_{m2}v_x+\\frac{v_o-v_y}{R_F}=0\n\\]\n\nSubstituting \\(v_x\\):\n\\[\nv_o\\left(\\frac1{R_{D2}}+\\frac1{R_F}\\right)\n=\nv_y\\left(\\frac1{R_F}-g_{m2}G_{m1}R_{D1}\\right)\n\\]\n\\[\nv_o=\n\\frac{R_{D2}\\left(1-g_{m2}G_{m1}R_{D1}R_F\\right)}{R_F+R_{D2}}\\,v_y\n\\]\n\nKCL at the input node:\n\\[\nI_{in}=\\frac{v_y-v_o}{R_F}+G_{m1}v_y\n\\]\n\nSubstituting \\(v_o\\) gives\n\\[\nI_{in}=\n\\frac{1+G_{m1}(R_F+R_{D2})+G_{m1}g_{m2}R_{D1}R_{D2}}\n{R_F+R_{D2}}\\,v_y\n\\]\n\n### Transimpedance gain\n\\[\n\\boxed{\nZ_T=\\frac{v_o}{I_{in}}\n=\n\\frac{R_{D2}\\left(1-G_{m1}g_{m2}R_{D1}R_F\\right)}\n{1+G_{m1}(R_F+R_{D2})+G_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\nWhen the loop gain is large, \\(Z_T\\approx -R_F\\), which is the ideal transimpedance of the feedback resistor.\n\n### Input resistance\n\\[\n\\boxed{\nR_{in}=\\frac{v_y}{I_{in}}\n=\n\\frac{R_F+R_{D2}}\n{1+G_{m1}(R_F+R_{D2})+G_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\nConceptually:\n- The common-gate M1 lowers the input resistance and buffers the input current.\n- M2 provides voltage gain and inversion.\n- \\(R_F\\) senses \\(V_{out}\\) and feeds back current to the input, so the closed-loop transimpedance is approximately \\(-R_F\\) for large loop gain.",
        "format": "markdown",
        "sha256": "b122c639047a3666d30b7ae80a38d75cace456f30de5d1ac4310c5b82d6203c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate M1 input, the common-source M2 driven by node X, and RF feedback from Vout to the input. The negative-feedback behavior, approximate −RF transimpedance, and low input resistance are also consistent with the solution.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1027,
        "output_tokens": 18447,
        "total_tokens": 19474,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1027,
        "output_tokens": 18447,
        "total_tokens": 19474,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **two-stage shunt-feedback transimpedance amplifier (TIA)**. It converts the input current \\(I_{in}\\) into an output voltage \\(V_{out}\\), with \\(R_F\\) providing negative feedback.\n\n### Qualitative operation\n- **M₁** operates as a **common-gate** stage. Its source is the input node; \\(V_b\\) biases its gate.\n- **M₂** operates as a **common-source** stage. Its gate is driven by the drain voltage of M₁ at node \\(X\\), and its drain provides \\(V_{out}\\).\n- **\\(R_F\\)** senses \\(V_{out}\\) and feeds a current back to the input node, forcing the input node to behave as a low-impedance virtual ground.\n- For high loop gain, the closed-loop transimpedance is approximately set by \\(R_F\\):\n  \\[\n  \\frac{V_{out}}{I_{in}} \\approx \\pm R_F\n  \\]\n  where the sign depends on the assumed direction of \\(I_{in}\\).\n\n---\n\n### Small-signal analysis\nLet\n\\[\ng_{m1},g_{m2},\\quad r_{o1},r_{o2}\n\\]\nbe the small-signal parameters of M₁ and M₂. Define node \\(Y\\) as the source of M₁ and node \\(X\\) as the drain of M₁. Neglecting body effect for first-order analysis.\n\n#### 1. Node \\(X\\)\nKCL at node \\(X\\):\n\\[\n\\frac{V_X}{R_{D1}}+\\frac{V_X-V_Y}{r_{o1}}-g_{m1}V_Y=0\n\\]\nThus\n\\[\nV_X=A_1V_Y\n\\]\nwhere\n\\[\nA_1=\\frac{g_{m1}+1/r_{o1}}{1/R_{D1}+1/r_{o1}}\n=\\frac{1+g_{m1}r_{o1}}{1+r_{o1}/R_{D1}}\n\\]\n\n#### 2. Output node\nKCL at \\(V_{out}\\):\n\\[\n\\frac{V_{out}}{R_{D2}}+\\frac{V_{out}-V_Y}{R_F}+g_{m2}V_X+\\frac{V_{out}}{r_{o2}}=0\n\\]\nHence\n\\[\nV_{out}=AV_Y\n\\]\nwhere\n\\[\nA=\\frac{1/R_F-g_{m2}A_1}{1/R_{D2}+1/r_{o2}+1/R_F}\n\\]\n\n#### 3. Input node\nWith \\(I_{in}\\) entering node \\(Y\\), KCL gives\n\\[\nI_{in}\n=\n\\frac{V_Y-V_{out}}{R_F}\n+\ng_{m1}V_Y\n+\n\\frac{V_Y-V_X}{r_{o1}}\n\\]\nDefine the input conductance at node \\(Y\\) as\n\\[\nY_{in}=g_{m1}+\\frac{1-A_1}{r_{o1}}\n=\n\\frac{1+g_{m1}r_{o1}}{R_{D1}+r_{o1}}\n\\]\nThen\n\\[\nI_{in}=V_Y\\left[Y_{in}+\\frac{1-A}{R_F}\\right]\n\\]\n\nTherefore the exact small-signal transimpedance is\n\\[\n\\boxed{\nZ_T=\\frac{V_{out}}{I_{in}}\n=\n\\frac{A}{Y_{in}+\\dfrac{1-A}{R_F}}\n}\n\\]\n\n### Approximate result\nFor large loop gain, \\(A\\) is negative and large in magnitude, so\n\\[\nZ_T\\approx -R_F\n\\]\nif \\(I_{in}\\) is defined as entering the input node. If \\(I_{in}\\) is drawn as a current sink from the input node, the sign reverses:\n\\[\nZ_T\\approx +R_F\n\\]\n\nThe input resistance is approximately\n\\[\nR_{in}=\\frac{V_Y}{I_{in}}\n=\n\\frac{1}{Y_{in}+(1-A)/R_F}\n\\approx\n\\frac{R_F}{1+|A|}\n\\]\nwhich is small, giving the virtual-ground behavior at the input.\n\n### Role of feedback\n- \\(R_F\\) sets the closed-loop transimpedance.\n- It lowers the input resistance and increases the bandwidth by moving the input pole to a higher frequency.\n- M₁ provides a low-impedance common-gate input stage; M₂ provides voltage gain and output drive.\n- \\(V_b\\) biases M₁, while \\(R_{D1}\\) and \\(R_{D2}\\) set the DC operating points.\n\nFor proper operation, M₁ and M₂ must remain in saturation, and the feedback must be negative.",
        "format": "markdown",
        "sha256": "f14e2840b7346fa6013e0d66970114a3d600e2b1bd3d04fcc19154a7b7be737d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as the common-gate input device, M₂ as the common-source stage driven by X, and R_F as negative feedback from Vout to the input, forming a transimpedance amplifier. The detailed analysis is consistent with the circuit and gives the expected −R_F limit for current entering the input node.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1027,
        "output_tokens": 23682,
        "total_tokens": 24709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18429,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1027,
        "output_tokens": 23682,
        "total_tokens": 24709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18429,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **flipped voltage follower (FVF)** / low-voltage current mirror. It uses two MOSFETs and current sources to create a low-impedance node at the source of \\(M_1\\) and a regulated output voltage at the drain of \\(M_1\\).\n\n## Component roles\n- **\\(M_1\\)**: NMOS common-gate transistor. Gate at \\(V_b\\), drain at \\(V_{out}\\), source at node \\(X\\).\n- **\\(M_2\\)**: PMOS feedback transistor. Source at \\(V_{DD}\\), drain at node \\(X\\), gate at \\(V_{out}\\).\n- **\\(I_1\\)**: Bias/output current source from \\(V_{DD}\\) to \\(V_{out}\\).\n- **\\(I_{in}\\)**: Input current source at node \\(X\\) (usually sinking from \\(X\\) to ground).\n- **Unlabeled bottom source**: Assume it is a bias current \\(I_B\\) also sinking from node \\(X\\) to ground.\n\n## DC analysis\nAssume both transistors operate in saturation.\n\nAt the output node:\n\\[\nI_{D1}=I_1\n\\]\n\nAt node \\(X\\), KCL gives (if both bottom sources sink current):\n\\[\nI_{D1}+I_{D2}=I_{in}+I_B\n\\]\nso\n\\[\nI_{D2}=I_{in}+I_B-I_1\n\\]\n\nFor \\(M_1\\):\n\\[\nI_{D1}=\\frac12 K_n(V_b-V_X-V_{thn})^2\n\\]\nTherefore\n\\[\nV_X=V_b-V_{thn}-\\sqrt{\\frac{2I_1}{K_n}}\n\\]\n\nFor \\(M_2\\):\n\\[\nI_{D2}=\\frac12 K_p(V_{DD}-V_{out}-|V_{thp}|)^2\n\\]\nThus\n\\[\nV_{out}=V_{DD}-|V_{thp}|-\\sqrt{\\frac{2(I_{in}+I_B-I_1)}{K_p}}\n\\]\n\nSo the output voltage \\(V_{out}\\) is set by the difference between the total sink current \\((I_{in}+I_B)\\) and the output bias current \\(I_1\\). If the second bottom source is absent, set \\(I_B=0\\).\n\n## Feedback action\nThe loop is negative feedback:\n- If \\(V_{out}\\) increases, \\(M_2\\) gate voltage increases, so \\(M_2\\) current decreases because it is PMOS.\n- Node \\(X\\) drops, increasing \\(V_{GS1}=V_b-V_X\\), so \\(M_1\\) pulls more current from \\(V_{out}\\).\n- This opposes the initial increase, stabilizing \\(V_{out}\\).\n\n## Small-signal characteristics\nIgnoring body effect and using \\(g_m\\), \\(g_{ds}\\):\n- Output resistance at \\(V_{out}\\):\n\\[\nr_{out}\\approx \\frac{1}{g_{m2}}\n\\]\nSo \\(V_{out}\\) is a low-impedance node.\n\n- Input resistance at node \\(X\\):\n\\[\nr_{in}\\approx \\frac{g_{ds1}}{g_{m1}g_{m2}}\n\\]\nSo node \\(X\\) is a very low-impedance current input node.\n\n- Small-signal transimpedance:\n\\[\n\\frac{v_{out}}{i_{in}}\\approx -\\frac{1}{g_{m2}}\n\\]\n\n## Typical application\nThis FVF cell is used in low-voltage analog circuits as:\n- a low-input-impedance current mirror input stage,\n- a current-to-voltage converter,\n- a low-output-impedance voltage buffer,\n- a building block for high-swing cascode current mirrors.\n\nThe key advantage is that it can operate with a very low supply voltage while providing low impedance at the input node \\(X\\) and a regulated output at \\(V_{out}\\).",
        "format": "markdown",
        "sha256": "9c3b2d7576be9412bcc6a28521310641ee8dee28d809ca33215cf68151c80934"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback path to the input node. Its very-low input resistance and output resistance/transimpedance estimates match the golden solution, with only a sign-convention difference; the extra FVF/DC discussion does not alter the essential answer.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1056,
        "output_tokens": 43139,
        "total_tokens": 44195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41579,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1056,
        "output_tokens": 43139,
        "total_tokens": 44195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41579,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **flipped-voltage-follower (FVF)-based current-to-voltage/current-mirror core**.  \nAssume the standard symbols:\n- \\(M_2\\) is a **PMOS** with source at \\(V_{DD}\\), drain at internal node \\(X\\), gate at \\(V_{out}\\).\n- \\(M_1\\) is an **NMOS** with drain at \\(V_{out}\\), source at node \\(X\\), gate at bias \\(V_b\\).\n- \\(I_1\\) is a current source from \\(V_{DD}\\) to the output node.\n- The bottom current source(s) determine the current drawn from node \\(X\\); call the net current sunk from node \\(X\\) as \\(I_{in}\\).\n\n### 1. Output-node KCL\nAt the \\(V_{out}\\) node, the current supplied by \\(I_1\\) must equal the drain current of \\(M_1\\):\n\\[\nI_{D1}=I_1\n\\]\nSo \\(M_1\\) is biased at a fixed current \\(I_1\\). If \\(M_1\\) is in saturation,\n\\[\nI_{D1}=\\frac12 k_n(V_b-V_X-V_{thn})^2=I_1\n\\]\nThus the source voltage \\(V_X\\) is approximately fixed:\n\\[\nV_X=V_b-V_{thn}-\\sqrt{\\frac{2I_1}{k_n}}\n\\]\nwhere \\(k_n=\\mu_nC_{ox}(W/L)_n\\).\n\n### 2. Node \\(X\\) KCL\nAt node \\(X\\), the currents from \\(M_1\\) and \\(M_2\\) must balance the current sunk by the current source(s):\n\\[\nI_{D1}+I_{D2}=I_{in}\n\\]\nTherefore\n\\[\nI_{D2}=I_{in}-I_1\n\\]\nSince \\(M_2\\) is PMOS, its current is\n\\[\nI_{D2}=\\frac12 k_p(V_{DD}-V_{out}-|V_{thp}|)^2\n\\]\nSolving,\n\\[\nV_{out}=V_{DD}-|V_{thp}|-\\sqrt{\\frac{2(I_{in}-I_1)}{k_p}}\n\\]\nwhere \\(k_p=\\mu_pC_{ox}(W/L)_p\\).\n\n### 3. Feedback action\nThe loop stabilizes the operating point:\n- If \\(V_{out}\\) increases, \\(V_{SG2}=V_{DD}-V_{out}\\) decreases, so \\(M_2\\) supplies less current.\n- Node \\(X\\) is pulled lower, which increases \\(V_{GS1}=V_b-V_X\\), so \\(M_1\\) tends to sink more current.\n- Since \\(I_1\\) is fixed, this pulls \\(V_{out}\\) back down, giving negative feedback.\n\n### 4. Operating conditions\nFor the equations to hold:\n- \\(M_1\\) saturated: \\(V_{out}>V_b-V_{thn}\\)\n- \\(M_2\\) saturated: \\(V_X<V_{out}+|V_{thp}|\\)\n- \\(I_{in}>I_1\\) so that \\(M_2\\) remains on and can supply the required current.\n\nIf the bottom current sources are intended as two separate currents, replace \\(I_{in}\\) by the net current leaving node \\(X\\). Thus the circuit generates an output voltage \\(V_{out}\\) that is set by the current difference \\(I_{in}-I_1\\) and the PMOS device parameters.",
        "format": "markdown",
        "sha256": "74dd33db4a5a1014d243fefaa1e78696c079a121b27467e4c5d3e189fb2a1e5b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the common-gate NMOS M1 and Vout-driven PMOS M2, and describes the feedback path through X and M1. Its ideal-model equations imply a nearly fixed input-node voltage and a local transimpedance of about −1/gm2. The FVF/current-mirror label is imprecise, but the circuit analysis captures the essential behavior.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1058,
        "output_tokens": 21101,
        "total_tokens": 22159,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1058,
        "output_tokens": 21101,
        "total_tokens": 22159,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the lower current source is \\(I_{in}\\) flowing from node \\(X\\) to ground, and MOSFETs are in saturation:\n\n- \\(M_1\\): NMOS, \\(D_1=V_{out}\\), \\(S_1=X\\), \\(G_1=V_b\\)\n- \\(M_2\\): PMOS, \\(S_2=V_{DD}\\), \\(D_2=X\\), \\(G_2=V_{out}\\)\n\nKCL at \\(V_{out}\\):\n\\[\nI_{D1}=I_1\n\\]\n\nKCL at node \\(X\\):\n\\[\nI_{D1}+I_{D2}=I_{in}\n\\]\n\\[\nI_{D2}=I_{in}-I_1\n\\]\n\nUsing square-law saturation equations:\n\\[\nI_{D1}=\\frac12 k_n (V_b-V_X-V_{THn})^2\n\\]\n\\[\nI_{D2}=\\frac12 k_p (V_{DD}-V_{out}-|V_{THp}|)^2\n\\]\nwhere\n\\[\nk_n=\\mu_n C_{ox}\\left(\\frac WL\\right)_1,\\qquad\nk_p=\\mu_p C_{ox}\\left(\\frac WL\\right)_2\n\\]\n\nSolving:\n\\[\n\\boxed{V_X=V_b-V_{THn}-\\sqrt{\\frac{2I_1}{k_n}}}\n\\]\n\n\\[\n\\boxed{V_{out}=V_{DD}-|V_{THp}|-\\sqrt{\\frac{2(I_{in}-I_1)}{k_p}}}\n\\]\n\nThus the feedback loop forces \\(M_1\\) to carry \\(I_1\\), while \\(M_2\\) carries the difference \\(I_{in}-I_1\\). The output voltage \\(V_{out}\\) is set by the PMOS side; \\(V_b\\) mainly sets the intermediate node \\(X\\).\n\nFor normal operation:\n\\[\n\\boxed{I_{in}>I_1}\n\\]\nand both transistors must remain in saturation:\n\\[\nV_{out}\\ge V_b-V_{THn}\n\\]\n\\[\nV_{DD}-V_X\\ge \\sqrt{\\frac{2(I_{in}-I_1)}{k_p}}\n\\]\n\nIf \\(I_{in}\\le I_1\\), \\(M_2\\) turns off and the above saturated expression for \\(V_{out}\\) is no longer valid; \\(M_1\\) may enter triode and \\(V_{out}\\) falls toward a lower voltage. The circuit is therefore a feedback current-to-voltage/bias converter rather than a simple current mirror.",
        "format": "markdown",
        "sha256": "70118dd5987d71bf5c745937e3ef482b1076cf5c2138b99066084a3cc53bf4eb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS M1 and Vout-driven PMOS feedback device M2, with M2 feeding current back to the input node. The current-to-voltage feedback interpretation and derived output relation capture the central transimpedance behavior; omitting an explicit small-signal input-resistance derivation is not essential here.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1056,
        "output_tokens": 29472,
        "total_tokens": 30528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28936,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1056,
        "output_tokens": 29472,
        "total_tokens": 30528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28936,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. In the ideal model, making the three load capacitors \\(C_L\\) arbitrarily large does **not** prevent oscillation; it only lowers the oscillation frequency.\n\nFor a three-stage ring oscillator with capacitive loading, each inverter plus its capacitor forms an RC delay stage. The loop phase shift reaches \\(180^\\circ\\) at a frequency approximately\n\n\\[\n\\omega_{\\text{osc}} \\sim \\frac{\\sqrt{3}}{R C_L}\n\\]\n\nso as \\(C_L \\to \\infty\\), \\(\\omega_{\\text{osc}} \\to 0\\). The oscillation condition depends on the inverter gain, not on the capacitor size, so the circuit still oscillates—just arbitrarily slowly. In practice, leakage and parasitic effects may eventually matter, but the large capacitances themselves do not cause failure to oscillate.",
        "format": "markdown",
        "sha256": "6c45ccf72e78ff74581eab875fea4ed71d7241a592cda6f0f03b842a328df20f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal capacitive loading at all three nodes preserves oscillation while lowering its frequency, and supports this with the per-stage phase condition and the expected inverse dependence on capacitance.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1050,
        "output_tokens": 7727,
        "total_tokens": 8777,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7563,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1050,
        "output_tokens": 7727,
        "total_tokens": 8777,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7563,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.\n\nFor any finite (even arbitrarily large) \\(C_L\\), the circuit still oscillates, but at a lower frequency. The capacitors add delay at each inverter output; in a simple small-signal model with inverter output resistance \\(R_o\\), each stage has a pole at \\(1/(R_oC_L)\\). The three-stage loop then oscillates at approximately\n\n\\[\n\\omega_{\\text{osc}}\\approx \\frac{\\sqrt{3}}{R_oC_L}\n\\]\n\nprovided the inverter DC gain is \\(g_mR_o>2\\). Thus as \\(C_L\\) becomes arbitrarily large, \\(\\omega_{\\text{osc}}\\to 0\\), but for any finite \\(C_L\\) the oscillation condition is still met.\n\nOnly in the mathematical limit \\(C_L=\\infty\\) (or if the inverter gain is too low) would the circuit fail to oscillate; with finite but arbitrarily large capacitors, it still oscillates, just very slowly.",
        "format": "markdown",
        "sha256": "c36cdd5b5dad3985df9f37b472a7fca83ac361128f17a823bd9d0fc0684a67e3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors slow the ring without stopping oscillation for finite capacitance, and supports this with a consistent small-signal pole and oscillation-frequency analysis.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1050,
        "output_tokens": 10613,
        "total_tokens": 11663,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10163,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1050,
        "output_tokens": 10613,
        "total_tokens": 11663,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10163,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No — not for any finite, arbitrarily large value of \\(C_L\\).\n\nThe circuit is a three-inverter ring oscillator. Increasing the load capacitors increases the delay of each inverter, so the oscillation frequency decreases. In the small-signal model, each stage has a pole at \\(1/(R C_L)\\). The oscillation frequency is roughly\n\n\\[\n\\omega_{\\text{osc}} \\propto \\frac{1}{R C_L}\n\\]\n\nso as \\(C_L \\to \\infty\\), the frequency tends to zero, but the circuit still has a valid oscillation condition as long as each inverter has enough gain (typically >2). The capacitors do not prevent oscillation; they just make it arbitrarily slow.\n\nOnly in the strict mathematical limit \\(C_L = \\infty\\) would the oscillation period become infinite, which is not a usable oscillation. But for any finite “arbitrarily large” capacitor, the circuit will still oscillate at a very low frequency.",
        "format": "markdown",
        "sha256": "06ae9c9d74b9547adc67f9295ebe2096229c49c03166aabd99d265a928e5f0ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency as the three capacitances increase, supported by the increased-delay and pole-frequency arguments. The qualification about the infinite-capacitance limit does not undermine the answer.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1050,
        "output_tokens": 11713,
        "total_tokens": 12763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11519,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1050,
        "output_tokens": 11713,
        "total_tokens": 12763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11519,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The phase noise **decreases by about 6 dB** (a factor of 4).\n\nReason: Doubling all three load capacitors roughly halves the ring oscillator’s frequency, while the dynamic power dissipation \\(P \\approx C_L V_{DD}^2 f_{\\rm osc}\\) remains approximately constant (because \\(C_L\\) doubles and \\(f_{\\rm osc}\\) halves). Since phase noise in a ring oscillator scales as  \n\\[\n\\mathcal{L}(\\Delta f) \\propto \\frac{f_{\\rm osc}^2}{P\\,\\Delta f^2},\n\\]\nwith \\(f_{\\rm osc}\\) halved and \\(P\\) fixed, the phase noise becomes \\(1/4\\) of its original value, i.e. \\(-6\\) dB.\n\n**Answer:** The phase noise is reduced by approximately **6 dB**.",
        "format": "markdown",
        "sha256": "0fdd63161c9157fbc75670e3b4f3dcf624dd641dd9a6734cbf5b5dce8154ef11"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states an approximately 6 dB (factor-of-four) reduction and supports it by noting that doubling the capacitors roughly halves the oscillation frequency.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1048,
        "output_tokens": 20405,
        "total_tokens": 21453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20237,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1048,
        "output_tokens": 20405,
        "total_tokens": 21453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20237,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the three load capacitors \\(C_L\\) slows the ring oscillator; the oscillation frequency is approximately halved since \\(f_0 \\propto 1/C_L\\).\n\nFor a ring oscillator, the phase-noise spectral density at a fixed offset \\(\\Delta f\\) is approximately proportional to\n\\[\n\\mathcal L(\\Delta f) \\propto \\frac{1}{C_L^2}\n\\]\n(or, equivalently, to \\(f_0/C_L\\) with fixed current drive). Therefore, doubling \\(C_L\\) reduces the phase-noise power spectral density by a factor of \\(4\\):\n\n\\[\n\\boxed{\\text{Phase noise decreases by } 6\\ \\text{dB (improves by 6 dB).}}\n\\]\n\nIf the phase noise were compared at a fixed offset relative to the carrier, the normalized value would be essentially unchanged. But at a fixed absolute offset frequency, the phase noise improves by about 6 dB.",
        "format": "markdown",
        "sha256": "dc24ddf45c33664581c6e6b27f4f5554e4ddab7fcd8923c025bfb1f3a5df2a79"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about 6 dB at a fixed absolute offset; it also correctly notes the unchanged value at fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 246,
        "output_tokens": 40600,
        "total_tokens": 40846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40406,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 246,
        "output_tokens": 40600,
        "total_tokens": 40846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40406,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling all three load capacitors \\(C_L\\) increases each inverter’s delay, so the oscillation frequency \\(f_0\\) is approximately halved.\n\nFor a ring oscillator in the thermal-noise-limited region, phase noise scales roughly as  \n\\[\n\\mathcal{L}(\\Delta f)\\propto \\frac{1}{C_L^2}\n\\]\nat a fixed offset \\(\\Delta f\\). Therefore, doubling \\(C_L\\) reduces the phase-noise power spectral density by a factor of \\(2^2=4\\), i.e. by\n\n\\[\n10\\log_{10}(4)\\approx 6\\text{ dB}\n\\]\n\nSo the phase noise **decreases/improves by about 6 dB**.",
        "format": "markdown",
        "sha256": "ce65e127f778e0214abcaa5497b8e34b23031db81076dab50f715b394d51ac2d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors approximately halves the oscillation frequency and lowers phase noise by a factor of four (about 6 dB) at a fixed offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1048,
        "output_tokens": 14685,
        "total_tokens": 15733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1048,
        "output_tokens": 14685,
        "total_tokens": 15733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** If \\(C_L\\) becomes arbitrarily large, the circuit will fail to oscillate.\n\nA rough small-signal loop gain for the three-inverter ring is\n\n\\[\nT(s)\\approx -\\frac{A^3}{\\left(1+\\frac{s}{\\omega_p}\\right)\\left(1+\\frac{s}{\\omega_0}\\right)^2},\n\\qquad\n\\omega_p \\approx \\frac{1}{R_o C_L}\n\\]\n\nwhere \\(A\\) is the inverter gain and \\(\\omega_0\\) is the pole frequency of the unloaded stages.\n\nOscillation requires a frequency at which the total phase shift is \\(360^\\circ\\) (i.e. an additional \\(180^\\circ\\) from the poles) and the loop gain magnitude is at least unity. But a very large \\(C_L\\) makes \\(\\omega_p\\) very small. At the frequency where the other poles provide the needed phase shift, the first pole has already attenuated the loop gain by approximately\n\n\\[\n\\frac{\\omega_p}{\\omega_0} \\sim \\frac{1}{R_o C_L\\omega_0} \\to 0\n\\]\n\nso the loop gain magnitude drops well below 1. Therefore the Barkhausen criterion is not satisfied and the circuit settles to a DC state instead of oscillating.",
        "format": "markdown",
        "sha256": "4716d325aea7ecc70aa595b17928ad19750761999bf2382ea8959fb6b726a320"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large load capacitance on one node creates a dominant low-frequency pole, causing loop-gain roll-off so the Barkhausen condition fails. The approximate loop-gain and DC-settling explanations are consistent with the essential result.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1068,
        "output_tokens": 14755,
        "total_tokens": 15823,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12518,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1068,
        "output_tokens": 14755,
        "total_tokens": 15823,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12518,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. If \\(C_L\\) becomes arbitrarily large, it introduces a dominant low-frequency pole at the output of the first inverter. At the frequency where the loop phase shift reaches \\(180^\\circ\\) (required for oscillation with three inverters), the gain of that stage is heavily attenuated. Eventually the overall loop gain drops below unity, so the circuit cannot sustain oscillation and fails to oscillate.",
        "format": "markdown",
        "sha256": "80ed3918e6a7301d1e8d68cf989f30526dce9e39b3aaaac89439bda72bc8b4cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the asymmetric large load as creating a dominant pole that attenuates loop gain below unity, causing oscillation to fail. Any phase-shift approximation is secondary.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1068,
        "output_tokens": 22916,
        "total_tokens": 23984,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22838,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1068,
        "output_tokens": 22916,
        "total_tokens": 23984,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22838,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. If \\(C_L\\) becomes arbitrarily large, the circuit will fail to oscillate.\n\nReason: The circuit is a three-inverter ring oscillator. For oscillation, the loop gain must be at least unity at the frequency where the total phase shift around the loop is \\(360^\\circ\\) (Barkhausen criterion). The large capacitor \\(C_L\\) at the output of the first inverter introduces a dominant pole at a very low frequency. This pole adds phase lag and, more importantly, heavily attenuates the signal at the frequency where the other two inverters provide the remaining phase shift needed for oscillation. As \\(C_L\\) increases, this attenuation becomes severe, eventually making the loop gain less than 1 at that frequency. Thus, for sufficiently large \\(C_L\\), the circuit settles to a DC operating point instead of oscillating.\n\nSo the answer is **yes, it fails to oscillate** for arbitrarily large \\(C_L\\) (assuming practical inverters with finite gain/output resistance).",
        "format": "markdown",
        "sha256": "9be005101587e11c95ff8c7c2ff4d20ea5134ad95450901692d67c7bc7ddce07"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large capacitance on one node can stop oscillation, explaining the dominant-pole gain/phase degradation and possible settling to a DC operating point.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1069,
        "output_tokens": 17495,
        "total_tokens": 18564,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17293,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1069,
        "output_tokens": 17495,
        "total_tokens": 18564,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17293,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling both NMOS and PMOS widths roughly doubles each transistor’s current drive and transconductance \\(g_m\\), but it also doubles the device capacitances that load each inverter stage. Thus the stage delay \\(C_L V_{DD}/I_D\\) and the oscillation frequency remain approximately unchanged.\n\nThe thermal-noise current PSD scales as  \n\\[\ni_n^2 \\propto g_m \\propto W\n\\]\nwhile the maximum signal charge at each node scales as  \n\\[\nq_{\\max}=C_L V_{DD}\\propto W.\n\\]\nUsing the Hajimiri/Lee phase-noise expression,  \n\\[\n\\mathcal L(\\Delta\\omega)\\propto \\frac{i_n^2}{q_{\\max}^2}\n\\propto \\frac{W}{W^2}=\\frac{1}{W}.\n\\]\nTherefore doubling \\(W\\) reduces the phase-noise power by a factor of 2, i.e. by about\n\n\\[\n\\boxed{3\\ \\text{dB}}\n\\]\n\nSo the phase noise improves (decreases) by approximately 3 dB. In practice, flicker noise also generally improves with larger device area, so the phase noise does not worsen.",
        "format": "markdown",
        "sha256": "4278e26772ac4dd6737c8c39629e26a7a47eed9d3af87f47537916b37424bedf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts an approximately 3 dB reduction and gives a valid scaling argument: noise-current power doubles while signal charge doubles, yielding half the phase-noise power.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1016,
        "output_tokens": 7621,
        "total_tokens": 8637,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1016,
        "output_tokens": 7621,
        "total_tokens": 8637,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of the NMOS and PMOS devices (with channel lengths unchanged) roughly doubles both the drive current and the parasitic capacitance, so the stage delay and oscillation frequency remain approximately constant.\n\nHowever, the dynamic power dissipation \\(P = C V_{DD}^2 f_0\\) roughly doubles because \\(C\\) doubles. For a ring oscillator, thermal phase noise is approximately\n\n\\[\n\\mathcal{L}(\\Delta \\omega) \\propto \\frac{kT}{P}\\left(\\frac{\\omega_0}{\\Delta \\omega}\\right)^2\n\\]\n\nso doubling \\(P\\) while keeping \\(f_0\\) roughly fixed reduces the phase noise power by a factor of 2. Flicker-noise contribution also generally decreases with larger device width.\n\nTherefore, the phase noise decreases by about **3 dB**.",
        "format": "markdown",
        "sha256": "4f5519419352df43c4617c1d6da2ef39a62780c898a2dd89e4099c637c34dc07"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts about a 3 dB reduction. The width, current, capacitance, and power scaling is consistent with the unchanged-frequency result; it does not claim that device thermal-noise current decreases.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1016,
        "output_tokens": 10267,
        "total_tokens": 11283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1016,
        "output_tokens": 10267,
        "total_tokens": 11283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of both NMOS and PMOS devices in the 3-stage ring oscillator:\n\n- Doubles the drive current of each inverter,\n- Doubles the gate/diffusion capacitance, so the oscillation frequency remains approximately unchanged,\n- Therefore doubles the power dissipation.\n\nFor a ring oscillator, phase noise from thermal noise is approximately inversely proportional to power dissipation at a fixed frequency:\n\\[\n\\mathcal{L}(\\Delta f)\\propto \\frac{1}{P}\n\\]\nSo doubling \\(P\\) halves the phase-noise power spectral density, which corresponds to a **3 dB improvement** (decrease) in phase noise.\n\n**Answer:** The phase noise **decreases by about 3 dB** (improves by 3 dB).",
        "format": "markdown",
        "sha256": "fcd0f4520a88fa5cec65652863d8c780a32b4f878d2e29ce435f83d7da4f3e1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that phase noise decreases by about 3 dB. The stated inverse-power scaling is consistent with doubling dissipation while keeping the frequency approximately unchanged.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1016,
        "output_tokens": 22537,
        "total_tokens": 23553,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22387,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1016,
        "output_tokens": 22537,
        "total_tokens": 23553,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22387,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the three inverters are identical with small-signal transconductance \\(g_m\\), and neglecting output resistance:\n\nLet a small-signal voltage \\(v_x\\) be applied at the supply node. By symmetry, the three inverter input voltages settle to the same value \\(v_i\\).\n\nFor each inverter, the PMOS current is  \n\\[\ni_P = g_m(v_x-v_i)\n\\]\nand the NMOS current is  \n\\[\ni_N = g_m v_i.\n\\]\nAt each output node, these currents must be equal because the next stage presents only a gate capacitance at low frequency:\n\\[\ng_m(v_x-v_i)=g_m v_i\n\\]\n\\[\nv_i=\\frac{v_x}{2}.\n\\]\n\nThus the current drawn from the supply by one inverter is\n\\[\ni_P = g_m\\left(v_x-\\frac{v_x}{2}\\right)=\\frac{g_m v_x}{2}.\n\\]\nFor three inverters,\n\\[\nI_x = 3\\left(\\frac{g_m v_x}{2}\\right)=\\frac{3g_m v_x}{2}.\n\\]\n\nTherefore the small-signal resistance seen looking into the supply node is\n\\[\n\\boxed{R_x=\\frac{v_x}{I_x}=\\frac{2}{3g_m}}.\n\\]\n\n(If transistor output resistance \\(r_o\\) is included, this becomes approximately \\(\\frac{2}{3(g_m+g_{ds})}\\).)",
        "format": "markdown",
        "sha256": "d9f4137711a3e9366a63d1f21f80bff7d61eb41799ce951007cb84f655156065"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance, but misses the dominant oscillation-driven charging and discharging of the load capacitances; the golden solution assigns this internally consistent static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1014,
        "output_tokens": 19746,
        "total_tokens": 20760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19449,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1014,
        "output_tokens": 19746,
        "total_tokens": 20760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19449,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal resistance looking into the supply node is found by applying a small test voltage \\(v_x\\) at the supply node and finding the resulting current.\n\nFor a matched CMOS inverter, the NMOS and PMOS transconductances are \\(g_m\\). Due to the feedback loop, a supply variation \\(v_x\\) causes each inverter’s input and output voltages to shift by approximately \\(v_x/2\\) (common-mode shift). Thus each inverter’s supply current changes by\n\n\\[\ni_{DD}=g_m\\left(v_x-\\frac{v_x}{2}\\right)=\\frac{g_m v_x}{2}.\n\\]\n\nThere are three inverters connected to the same supply node, so the total small-signal current is\n\n\\[\nI_x = 3\\left(\\frac{g_m v_x}{2}\\right)=\\frac{3g_m v_x}{2}.\n\\]\n\nHence the small-signal resistance is\n\n\\[\n\\boxed{R_X=\\frac{v_x}{I_x}=\\frac{2}{3g_m}}\n\\]\n\nassuming channel-length modulation is neglected.  \nIf the output resistance \\(r_o=1/g_{ds}\\) is included, \\(g_m\\) is effectively replaced by \\(g_m+g_{ds}\\), giving\n\n\\[\n\\boxed{R_X=\\frac{2}{3(g_m+g_{ds})}}.\n\\]\n\nSo the commonly expected result is\n\n\\[\n\\boxed{R_X=\\frac{2}{3g_m}}.\n\\]",
        "format": "markdown",
        "sha256": "1eb52c984ea043ec9cae090803f4cfc977a5763beac8873551f605e4e46723a5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance and ignores the oscillation-driven charging and discharging of the load capacitances, which sets the supply resistance. The golden solution assigns this type of answer 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1013,
        "output_tokens": 34194,
        "total_tokens": 35207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33893,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1013,
        "output_tokens": 34194,
        "total_tokens": 35207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33893,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming matched transistors and neglecting channel-length modulation, each inverter is effectively diode-connected because, in the common-mode response to a supply disturbance, its input and output move together.\n\nFor one inverter, the small-signal resistance from the supply node to ground is formed by the series combination of the PMOS and NMOS diode-connected devices:\n\n\\[\nR_{\\text{inv}}=\\frac{1}{g_m}+\\frac{1}{g_m}=\\frac{2}{g_m}\n\\]\n\nThree such inverters are connected in parallel from the supply node to ground, so\n\n\\[\nR_X = \\frac{1}{3}\\left(\\frac{2}{g_m}\\right)\n\\]\n\n\\[\n\\boxed{R_X = \\frac{2}{3g_m}}\n\\]\n\nIf channel-length modulation is included, replace \\(g_m\\) by \\(g_m+g_{ds}\\):\n\n\\[\n\\boxed{R_X = \\frac{2}{3(g_m+g_{ds})}}\n\\]\n\nThus the supply node presents a positive small-signal resistance.",
        "format": "markdown",
        "sha256": "1ca9e6ef971a2f843159bda2d3352371f076ff1cbf6e7702a03c5281c490ba5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer analyzes a static, non-oscillating operating point and gives a gm-based resistance. It misses the dominant oscillation-driven charging and discharging of the load capacitances, which sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1013,
        "output_tokens": 30212,
        "total_tokens": 31225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1013,
        "output_tokens": 30212,
        "total_tokens": 31225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the answer can change.\n\nThat `RX ≈ (1/3)(1/gmn + 1/gmp)` result assumes each inverter is in a stable, self-biased small-signal condition, i.e. its input and output are effectively at the same small-signal voltage, so the PMOS/NMOS pair looks like two diode-connected devices in series. In a non-oscillating ring with all three nodes settled at the same DC level, that is a reasonable small-signal estimate.\n\nWhen the circuit oscillates, however, there is no fixed DC operating point. The inverters are switching large-signal, the transistor conductances vary periodically with time, and the supply current is not simply the sum of three DC diode-connected branches. The small-signal resistance seen at the supply should be found by a periodic small-signal/large-signal analysis, and it can be time-varying or have a negative-resistance component. Therefore the simple diode-connected formula is no longer generally valid.",
        "format": "markdown",
        "sha256": "a5c098f75895648cae0a842007997059115a4828d48b771700e390eeb70113fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the static diode-connected small-signal model is not directly valid during oscillation, but it misses the key result: supply current is set by charging and discharging node capacitances, while RX remains on the order of the MOS on-resistance rather than becoming much higher. The time-varying/negative-resistance comments do not establish that result.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 22385,
        "total_tokens": 23478,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22180,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 22385,
        "total_tokens": 23478,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22180,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. That expression is only valid for inverters that are **diode-connected** (input tied to output) and biased in small-signal saturation. In an oscillating ring, the inverters are not diode-connected: each input is driven by the previous stage, and the circuit is a feedback loop. During oscillation, the devices switch between cutoff, triode, and saturation, so the supply-node small-signal admittance is **periodic/time-varying**, not a single resistor.\n\nSo the simple  \n\\[\nR_X \\approx \\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right)\n\\]\nis at best an open-loop / low-frequency DC estimate. Once the circuit oscillates, a proper small-signal analysis must be done around the periodic steady state (LPTV analysis) or averaged over one cycle; the effective resistance will generally differ. Thus the answer changes—the diode-connected-inverter model is not valid for the running oscillator.",
        "format": "markdown",
        "sha256": "0a8785ee9c114c093a2139a1a87c23d0f995a2269862c30e53b353dcf434eca9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the running oscillator is not a set of diode-connected inverters, but misses the dominant capacitive charging mechanism and the key conclusion that the effective resistance remains on the order of the MOS on-resistance rather than becoming much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 31130,
        "total_tokens": 32222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30932,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 31130,
        "total_tokens": 32222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30932,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The given formula assumes each inverter is **diode-connected**, i.e. its input is tied to its own output, so the PMOS and NMOS appear as two series small-signal resistances \\(1/g_{mp}\\) and \\(1/g_{mn}\\). Three such inverters in parallel then give  \n\\[\nR_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right).\n\\]\n\nBut in an oscillating ring oscillator, the inverters are **not** diode-connected; each inverter’s input is driven by the previous stage, and the circuit is in large-signal switching operation. The transistors are not all in saturation simultaneously, and the small-signal supply resistance is no longer a simple constant given by the diode-connected model. It becomes time-varying over the oscillation cycle, depends on the load capacitance and switching frequency, and can even exhibit a negative-resistance component at some frequencies due to the feedback.\n\nSo, **yes, the answer changes** if the circuit is actually oscillating. The diode-connected calculation is only valid for the non-oscillating/open-loop case or for a formal common-mode linearization around the unstable dc trip point, not for the running oscillator.",
        "format": "markdown",
        "sha256": "0c423d0e99d19116ca551269ca4bbc648e18a13b4b27e8a5dc57b074848d3dc3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the diode-connected small-signal model does not describe the running oscillator, but gives no capacitive-charging argument or estimate of RX and does not establish that its magnitude remains on the order of the MOS on-resistance. The time-varying/negative-resistance discussion does not address the central result.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1093,
        "output_tokens": 22955,
        "total_tokens": 24048,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1093,
        "output_tokens": 22955,
        "total_tokens": 24048,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To first order, the **initial small-signal voltage gain stays essentially constant** as \\(W_7\\) is increased.\n\nIncreasing the width of M7 raises the tail current, but in the pre-regeneration phase the gain is approximately set by the ratio of the input-pair transconductance to the cross-coupled latch transconductance:\n\n\\[\nA_{v,\\text{init}}\\approx \\frac{g_{m1,2}}{g_{m3,4}}\n\\;\\propto\\;\n\\sqrt{\\frac{(W/L)_{1,2}}{(W/L)_{3,4}}}\n\\]\n\n(assuming square-law, saturated devices). Since both \\(g_m\\)’s increase together as the tail current increases, the current cancels and the initial gain is nearly independent of \\(W_7\\).\n\nSo: **initial voltage gain unchanged to first order; increasing \\(W_7\\) mainly increases speed/power.** With short-channel/output-resistance effects included, the gain may actually decrease slightly as \\(W_7\\) becomes very large; if \\(W_7\\) is so large that devices leave saturation, the gain can drop significantly.",
        "format": "markdown",
        "sha256": "a069fa958c86519032494b7d076af2b8445f2f10d531a9fd4f12975231e37418"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the opposite main trend: initial gain decreases as M7 widens because tail current rises faster than the relevant gain factor. It notes the current increase but incorrectly concludes that transconductance scaling cancels it; the possible decrease is treated only as a secondary effect.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1055,
        "output_tokens": 27730,
        "total_tokens": 28785,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27495,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1055,
        "output_tokens": 27730,
        "total_tokens": 28785,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27495,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the width of \\(M_7\\) increases the tail current. In the usual strong-inversion square-law regime, the initial voltage gain before the positive-feedback latch takes over is approximately\n\n\\[\nA_{v0} \\approx g_m r_o \\quad \\text{(or } g_m/g_{ds}\\text{)}.\n\\]\n\nAs \\(I_{\\text{tail}}\\) increases, \\(g_m \\propto \\sqrt{I_{\\text{tail}}}\\) while \\(r_o \\propto 1/I_{\\text{tail}}\\), so\n\n\\[\nA_{v0} \\propto \\frac{1}{\\sqrt{I_{\\text{tail}}}}.\n\\]\n\nTherefore, **the initial voltage gain decreases as the width of \\(M_7\\) increases** (typically with a \\(1/\\sqrt{W_7}\\) dependence in long-channel devices). This is the usual tradeoff: larger tail current gives faster operation but lower initial gain and potentially larger offset.",
        "format": "markdown",
        "sha256": "c38f85f05e1361bc9a5f03f30fae979b73bd7d06d8d8cd36e4d4c348d6ec3f6e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The trend and tail-current reasoning are correct, but the initial gain is an integration gain, not generally a small-signal gm·ro gain. The conclusion and inverse-square-root scaling match, though the stated mechanism is imprecise for this comparator.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 253,
        "output_tokens": 27584,
        "total_tokens": 27837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27387,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 253,
        "output_tokens": 27584,
        "total_tokens": 27837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27387,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It remains essentially **constant**.\n\nDuring the initial sensing phase, the small-signal voltage gain is approximately\n\n\\[\nA_{v,\\text{init}} \\approx \\frac{g_{m1,2}}{g_{m3,4}}\n\\]\n\nwhere \\(g_{m1,2}\\) is the transconductance of the input pair \\(M_1/M_2\\), and \\(g_{m3,4}\\) is the transconductance of the cross-coupled NMOS latch \\(M_3/M_4\\).\n\n\\(M_7\\) sets the tail current \\(I_T\\). Both the input pair and the latch transistors carry approximately \\(I_T/2\\), so in square-law operation,\n\n\\[\ng_m \\propto \\sqrt{I_T}\n\\]\n\nThus both \\(g_{m1,2}\\) and \\(g_{m3,4}\\) increase by the same factor when \\(W_7\\) is increased, so their ratio—and hence the initial voltage gain—does not change to first order.\n\nIncreasing \\(W_7\\) mainly increases the bias current and makes the latch faster, but it does **not** significantly change the initial voltage gain.",
        "format": "markdown",
        "sha256": "6620a001f094d80b59cb313fd39e7cd5cc1334aa5cea066aac157c74ee3e806f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly concludes the gain stays constant. Although it recognizes that widening M7 increases tail current, it uses an inapplicable input-pair-to-latch transconductance ratio; the initial gain falls because the relevant gain factor scales roughly as gm/ICM.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1055,
        "output_tokens": 30388,
        "total_tokens": 31443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30152,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1055,
        "output_tokens": 30388,
        "total_tokens": 31443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30152,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It **decreases**.\n\nIncreasing the capacitance at nodes P and Q slows the initial buildup of the differential voltage at these nodes because the input pair must charge/discharge a larger capacitance. Equivalently, the initial voltage gain has a pole approximately of the form  \n\\[\nA_{v,\\text{init}} \\sim \\frac{g_{m1,2}}{g_{m3,4}+sC_{P,Q}} \\quad \\text{or} \\quad A_{v,\\text{init}} \\propto \\frac{1}{C_{P,Q}},\n\\]\nso a larger \\(C_{P,Q}\\) reduces the initial gain available before the latch regenerates.",
        "format": "markdown",
        "sha256": "b1df45261413b2a83d803d1f945572e2d7d0ce26fbab8718dcf11b549f963f4f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the essential result: larger node capacitance slows the transient but leaves the initial gain approximately unchanged. The answer recognizes the transient slowing, but incorrectly treats it as a reduced gain and applies an unsuitable capacitance-dependent gain expression.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1054,
        "output_tokens": 25439,
        "total_tokens": 26493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1054,
        "output_tokens": 25439,
        "total_tokens": 26493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It **decreases**.\n\nIncreasing the capacitance at nodes P and Q slows the initial charging/discharging of these internal nodes during the evaluation phase. Before the cross-coupled latch fully regenerates, the input pair M₁/M₂ must develop a differential voltage on P and Q. The initial voltage change is approximately\n\n\\[\n\\Delta V_{P,Q} \\propto \\frac{g_{m1,2}\\, v_{in}\\, t}{C_{P,Q}}\n\\]\n\nso a larger \\(C_P\\) or \\(C_Q\\) gives a smaller initial voltage difference for the same input and time. In an AC sense, the added capacitance also moves the pole at P/Q to a lower frequency, reducing the pre-amplification gain.\n\nThus, the **initial voltage gain decreases** as the capacitance at nodes P and Q is increased.",
        "format": "markdown",
        "sha256": "d31488d2c91178fb05454cc80cae43afd7560c034d2153ba534f7b3f2d8a49a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the essential result. Larger capacitance slows the transient, but it also lengthens the amplification phase proportionally, so the initial gain remains approximately unchanged; the answer considers only the voltage change at a fixed time.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1054,
        "output_tokens": 16920,
        "total_tokens": 17974,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1054,
        "output_tokens": 16920,
        "total_tokens": 17974,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It decreases.\n\nReason: nodes P and Q are the internal source/drain nodes of the input pair and cross-coupled pair. During the initial (pre-regeneration) phase, the input differential current charges/discharges the capacitances at P and Q, creating a differential voltage. A larger capacitance at P and Q means a smaller voltage change for the same input current and time, so the initial output voltage difference is reduced. Thus, the initial voltage gain is lower.",
        "format": "markdown",
        "sha256": "3be8d8ffbf53bf2492ec0a0b734570c73b72024469c6bde60849833b4bde7eca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the essential result. The answer considers the smaller voltage change for a fixed current and time, but misses that larger capacitance proportionally lengthens the amplification phase, so the initial gain remains approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1056,
        "output_tokens": 19662,
        "total_tokens": 20718,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1056,
        "output_tokens": 19662,
        "total_tokens": 20718,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of **M5 and M6** generally **improves the speed** of this latch-type comparator, because M5/M6 are the cross-coupled **PMOS regenerative latch** pair. Larger widths increase their transconductance \\(g_m\\), strengthening the positive feedback, so the latch regenerates the output differential voltage faster. The regeneration time constant is roughly proportional to \\(C/g_m\\), so larger \\(g_m\\) speeds up the decision.\n\nHowever, there is a tradeoff:  \n- Increasing M5/M6 also increases parasitic capacitance at nodes X and Y.  \n- If they are made too wide, this extra capacitance can slow the initial sensing/discharge phase and increase precharge time, eventually degrading speed.\n\nSo in the normal design range, speed **improves**, but there is an optimum width beyond which it can degrade.",
        "format": "markdown",
        "sha256": "f961490b5525028708fd25f1320aa548f8b6f65c02a5c41933b04bce21b06129"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M5/M6 as the cross-coupled PMOS devices and explains that stronger regeneration initially improves speed, while added capacitance eventually limits the benefit and creates an optimum width. The extra comments about sensing and precharge are not needed but do not change the central conclusion.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1054,
        "output_tokens": 19897,
        "total_tokens": 20951,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19724,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1054,
        "output_tokens": 19897,
        "total_tokens": 20951,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19724,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Degrade.** Increasing the widths of M5 and M6 increases the parasitic capacitance at nodes X and Y. During evaluation, the input pair must first discharge these nodes before the latch can regenerate. Also, for a fixed tail current, the transconductance of M5/M6 increases only weakly with width (\\(g_m \\propto \\sqrt{W}\\) in strong inversion), while the capacitance increases roughly linearly with \\(W\\). The extra capacitance therefore slows the latch/regeneration delay.\n\nSo M5/M6 should be sized just large enough for reliable regeneration, not arbitrarily wide.",
        "format": "markdown",
        "sha256": "3caa22b56b721f7496fe7acdc73a9cf5dfd4a512b901802ddd37972d7fb34f4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the real capacitance penalty and the need to avoid unlimited sizing, but gets the central trend wrong: wider cross-coupled M5/M6 initially strengthen regeneration and improve speed, until added capacitance eventually limits the benefit.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1056,
        "output_tokens": 28784,
        "total_tokens": 29840,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28665,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1056,
        "output_tokens": 28784,
        "total_tokens": 29840,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28665,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Degrade.\n\nM5 and M6 are the cross-coupled PMOS latch devices. Increasing their widths increases the parasitic capacitance at nodes X and Y (drain diffusion and gate capacitance). During evaluation, these nodes must change rapidly, so the extra capacitance slows the latch regeneration and increases delay. Although the PMOS drive current also increases, in a normally sized comparator the added capacitance dominates once the devices are reasonably sized. Thus, increasing M5/M6 widths further generally **degrades speed**; they should be sized large enough for reliable regeneration but not excessively large.",
        "format": "markdown",
        "sha256": "b0067180268ddfdabb055021961c2f43dd627b91d4a7a8155883adc69f827dbb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the cross-coupled PMOS devices and the competing drive-strength and capacitance effects, but incorrectly concludes that added capacitance dominates. Initially, stronger regeneration improves speed; capacitance limits the benefit only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1054,
        "output_tokens": 32283,
        "total_tokens": 33337,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1054,
        "output_tokens": 32283,
        "total_tokens": 33337,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors generally **improves speed** (reduces propagation delay), because the clocked transistors are in series with the output/internal nodes in the clocked inverters. Widening them lowers their on-resistance \\(R_{on}\\), so the RC time constant for charging/discharging the internal nodes and load capacitance decreases.\n\nHowever, there is a tradeoff: larger clocked transistors also add diffusion capacitance and increase the clock load. If they are made excessively wide, that added capacitance can eventually dominate and degrade speed. But for typical sizing, the immediate effect of increasing their width is a faster circuit.",
        "format": "markdown",
        "sha256": "1398825f72648f8fdd383ef4665893aafe297ff0cfed4115449afa93a98449d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening the clocked transistors initially improves speed by reducing their on-resistance, while added capacitance can eventually limit or reverse the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1029,
        "output_tokens": 22225,
        "total_tokens": 23254,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22311,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1029,
        "output_tokens": 22225,
        "total_tokens": 23254,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22311,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of **only the clocked transistors** generally **does not improve—and usually degrades—the speed** once the devices are reasonably sized.\n\nReason: widening them lowers their ON resistance, but they are in series with the data transistors and are connected directly to the high-impedance dynamic nodes \\(x\\) and \\(y\\). The larger devices add diffusion capacitance at these nodes and increase the capacitive load on \\(\\mathrm{CK}/\\overline{\\mathrm{CK}}\\). Since the other series transistor still limits the current, the extra capacitance must be charged/discharged every clock phase, while the resistance benefit is limited. Clock feedthrough/charge sharing also becomes worse.\n\nThere is an optimum width. If the clocked transistors are initially undersized, a small increase can help; beyond that optimum, wider clock transistors slow the circuit. To improve speed, size the data transistors/entire stack and the clock driver properly rather than blindly increasing only the clocked devices.\n\nSo, for the usual/optimized case: **speed degrades; there is no monotonic speed improvement from widening the clocked transistors.**",
        "format": "markdown",
        "sha256": "fabbf27d1deeb270d8eed768601980be5f6998ee46faeac20c9517ceb1b7a6c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the correct tradeoff: lower on-resistance gives an initial speed improvement for undersized clocked devices, while added latch-node capacitance creates an optimum and can slow the circuit beyond it. Its emphasis on degradation once devices are reasonably sized is consistent with that width-dependent trend.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1029,
        "output_tokens": 22862,
        "total_tokens": 23891,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1029,
        "output_tokens": 22862,
        "total_tokens": 23891,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Speed typically **degrades** if the widths of the clocked transistors are arbitrarily increased.\n\nReason: The clocked transistors are driven by the clock signals \\(CK\\) and \\(\\overline{CK}\\). Making them wider:\n- increases the capacitive load on the clock lines, slowing the clock edges;\n- increases the diffusion capacitance at internal nodes such as \\(X\\) and \\(Y\\), which must be charged/discharged by the preceding non-clocked transistors;\n- can worsen clock feedthrough.\n\nAlthough the wider clocked transistors have lower on-resistance, in a practical TSPC/TSPC-like circuit the extra clock and internal-node capacitance usually dominates, so the maximum operating speed decreases. The clocked transistors should therefore be kept relatively small or be optimally sized, not simply widened.",
        "format": "markdown",
        "sha256": "2e76b44bacedd96c700c52e54541b5010fb0512353a9c2adfe15549a7db13b23"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the capacitance penalty and lower on-resistance, but concludes that widening degrades speed. The golden answer says widening initially improves speed before added capacitance limits or reverses the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1031,
        "output_tokens": 28546,
        "total_tokens": 29577,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1031,
        "output_tokens": 28546,
        "total_tokens": 29577,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The circuit is a clocked divide-by-2 stage that can provide quadrature outputs, typically taken at nodes **X** and **Z**.\n\nOperation:\n- When \\(CK=1\\), the left clocked inverter is active:\n  \\[\n  X = \\overline{Z}\n  \\]\n- When \\(CK=0\\), the right clocked inverter is active. Its output \\(Y=\\overline{X}\\), and the inverter gives:\n  \\[\n  Z = X\n  \\]\nThus the loop toggles once per clock cycle, so the output frequency is half the clock frequency.\n\nTiming:\n- \\(X\\) changes on the rising edge of \\(CK\\).\n- \\(Z\\) changes on the falling edge of \\(CK\\).\n- The time difference is \\(T_{CK}/2\\), while the output period is \\(2T_{CK}\\).\n- Therefore the phase difference is:\n  \\[\n  \\frac{T_{CK}/2}{2T_{CK}} \\times 360^\\circ = 90^\\circ\n  \\]\n\nSo **yes**, with a 50% duty-cycle clock, nodes **X** and **Z** are quadrature outputs.",
        "format": "markdown",
        "sha256": "8727f2438ea0a79eaa32c4bce052e64be6f7eb3ee56d9e0e20c6462a8b7803b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature at X and Z and gives the ideal 90° timing, but omits the inverter delay and unequal latch loading that make the outputs not exactly quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1017,
        "output_tokens": 11755,
        "total_tokens": 12772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11512,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1017,
        "output_tokens": 11755,
        "total_tokens": 12772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11512,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—if the outputs are taken at nodes \\(X\\) and \\(Y\\)** (or \\(X\\) and \\(Z\\)) rather than only at \\(Z\\).\n\nThe circuit is essentially a master–slave clocked-inverter divider:\n\n- First stage is transparent when \\(CK=1\\): \\(X=\\overline{Z}\\)\n- Second stage is transparent when \\(CK=0\\): \\(Y=\\overline{X}\\), and the inverter gives \\(Z=\\overline{Y}\\)\n- Therefore \\(X\\) changes on one clock edge, while \\(Y\\) (and \\(Z\\)) changes on the opposite clock edge.\n\nWith a **50% duty-cycle clock**, these two switching instants are separated by half a clock period, which is **one-quarter of the divider output period**—i.e., a **90° phase shift**. So nodes \\(X\\) and \\(Y\\) provide quadrature outputs.\n\nCaveat: if only the final output \\(Z\\) is considered, there is only one phase, so the circuit alone would not be providing two quadrature outputs.",
        "format": "markdown",
        "sha256": "3dd943ee95e782968552be73332ab5710bb767c0f7ce12a0978a57fd209650e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies nominal X/Y quadrature from opposite-phase latch switching in a divide-by-two, but gives only the ideal timing argument and omits the Inv3 delay and unequal latch loading that make the phase non-exact.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1017,
        "output_tokens": 22091,
        "total_tokens": 23108,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21873,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1017,
        "output_tokens": 22091,
        "total_tokens": 23108,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21873,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The circuit is a clocked two-latch loop that acts as a quadrature-output divide-by-2.\n\n- Left branch is enabled when \\(CK=0\\) (\\(\\overline{CK}=1\\)): \\(X = \\overline{Z}\\)\n- Right branch is enabled when \\(CK=1\\): \\(Y = \\overline{X}\\)\n- Inverter gives \\(Z = \\overline{Y}\\)\n\nThus the loop toggles at half the clock frequency, and the two latch outputs \\(X\\) and \\(Y\\) are separated by half a clock period. At the divided output frequency, that half-clock delay is \\(90^\\circ\\), so \\(X\\) and \\(Y\\) are quadrature outputs. \\(Z\\) is the complementary output of \\(Y\\).",
        "format": "markdown",
        "sha256": "5203939a7d0dd8e04b2eb1cbcc89123f421a669a7d9153a3b61ff05b185d3b8a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the latches switching half a clock period apart, but omits the inverter-delay skew and unequal latch loading that make the outputs imperfectly quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1015,
        "output_tokens": 13142,
        "total_tokens": 14157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1015,
        "output_tokens": 13142,
        "total_tokens": 14157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Improve.**\n\nThe clocked transistors act as switches in series with the cross-coupled inverters. When the corresponding clock phase enables a branch, the output/internal nodes must charge or discharge through those switches. Increasing their widths lowers their on-resistance and increases their current drive, so the latch can evaluate/regenerate faster. The main penalty is increased clock load and some added diffusion capacitance, but for the intrinsic speed of the latch, wider clocked transistors generally improve speed (with diminishing returns).",
        "format": "markdown",
        "sha256": "2d76f036a6bbd4ebfbfdb9696b310cb642755f89758d6cfd02ee3222ed960548"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed because it lowers their on-resistance. It omits the topology-specific charge-sharing effect and its limit on the swing, so it does not earn full credit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2074,
        "output_tokens": 958734,
        "total_tokens": 960808,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 958595,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1037,
        "output_tokens": 16495,
        "total_tokens": 17532,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16356,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Improves** (with diminishing returns).\n\nIncreasing the widths of the clocked transistors lowers their on-resistance. Since these transistors are in series with the pull-up/pull-down paths of the cross-coupled inverters, a lower resistance allows the internal nodes to charge/discharge faster and increases the effective transconductance of the latch, so the circuit can resolve/regenerate faster.\n\nTrade-off: Wider clocked transistors also add capacitance to the clock lines (CK/CKbar) and to internal nodes. At very large widths, the extra clock load and capacitance can offset the speed gain or increase power, but intrinsically the latch speed improves.",
        "format": "markdown",
        "sha256": "2202c42c0a9dc8e2cb87a438a6eba52ecc92aa2a445b6f6a5a43d55b90cfff0a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed by lowering their on-resistance. It omits charge sharing, the key swing-degradation limit identified in the golden solution, so it does not earn full credit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1037,
        "output_tokens": 26764,
        "total_tokens": 27801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26599,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1037,
        "output_tokens": 26764,
        "total_tokens": 27801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26599,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Speed degrades** if the widths of the clocked transistors are increased.\n\nReason: The clocked transistors mainly contribute extra gate/drain capacitance at the internal nodes and increased clock load. They are not the critical speed-limiting devices in this latch. Making them wider increases the parasitic capacitance that must be charged/discharged during evaluation, and the stronger clocked PMOS devices also oppose the pull-down network. The extra capacitance and contention slow the circuit rather than speeding it up.",
        "format": "markdown",
        "sha256": "f49b33b9972628d4cfc7d9a43ffe93401ed2655c5eb7382b9c6ae86e34dfe14c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the central result: widening the clocked devices improves speed by reducing series resistance while adding little loading to the data path. It also overstates the internal-node capacitance and contention as dominant slowing effects.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1037,
        "output_tokens": 26617,
        "total_tokens": 27654,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1037,
        "output_tokens": 26617,
        "total_tokens": 27654,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **clocked dynamic toggle flip-flop / divide-by-2 counter** built from two switches and three inverters in a feedback loop.\n\n**Operation:**\n\n- Let the feedback node be \\(Q\\).\n- The two switches are controlled by complementary clocks:  \n  - \\(CK\\) controls the first switch.  \n  - \\(\\overline{CK}\\) controls the second switch.\n\n**When \\(CK = 1\\):**\n- First switch is **closed**, second switch is **open**.\n- \\(Q\\) is applied to \\(Inv_1\\), so its output is \\(\\overline{Q}\\).\n- The second switch is open, so the two-inverter chain holds its previous value, and \\(Q\\) remains unchanged.\n\n**When \\(CK = 0\\):**\n- First switch is **open**, second switch is **closed**.\n- The value \\(\\overline{Q}\\) stored at the output of \\(Inv_1\\) is passed through the two series inverters, which act as a non-inverting buffer.\n- Therefore \\(Q\\) becomes \\(\\overline{Q}\\), i.e. the state toggles.\n\n**Result:**\n- On every falling edge of the clock, \\(Q\\) toggles once.\n- If the clock is periodic, the output is a square wave at **half the clock frequency**:\n\n\\[\nf_{out}=\\frac{f_{CK}}{2}\n\\]\n\n- It is a **negative-edge-triggered T flip-flop** with \\(T=1\\).\n\n**Note:**  \nThe two switches must be controlled by **non-overlapping clocks**. If both conduct momentarily, the three-inverter loop can race/oscillate. The circuit is dynamic because it relies on temporary charge storage at the floating node when one switch is open.",
        "format": "markdown",
        "sha256": "f879e186bfcb9d7764bcdf58a9a9f6c0fb45b614a20e86eee3a17c9a83bf9fe3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic-latch toggle divider with output frequency half the clock frequency. The specific phase and inverter-path explanation is secondary under the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 670,
        "output_tokens": 15972,
        "total_tokens": 16642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15029,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 670,
        "output_tokens": 15972,
        "total_tokens": 16642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15029,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **clocked dynamic T flip-flop / divide-by-2 counter** using two non-overlapping clock phases.\n\n### Components\n- **S₁**: switch controlled by **CK**\n- **S₂**: switch controlled by **\\(\\overline{CK}\\)**\n- **Inv₁**: first inverter, labeled\n- **Inv₂, Inv₃**: two cascaded inverters forming a non-inverting feedback buffer\n\n### Operation\nLet the output of the final inverter be **Q**.\n\n- **When CK = 1**\n  - S₁ is closed, S₂ is open.\n  - The loop is broken at S₂, so the state is held.\n  - Inv₁ is driven by the feedback node, but its output is isolated from the rest of the loop.\n  - **Q remains unchanged.**\n\n- **When CK = 0**\n  - S₁ is open, S₂ is closed.\n  - The input of Inv₁ holds the previous value of Q.\n  - Inv₁ produces \\(\\overline{Q}\\), which passes through S₂ and then through Inv₂ and Inv₃.\n  - Two cascaded inverters give no net inversion, so the feedback signal becomes \\(\\overline{Q}\\).\n  - Therefore:\n    \\[\n    Q_{\\text{new}} = \\overline{Q_{\\text{old}}}\n    \\]\n  - **Q toggles.**\n\n### Function\n- The output changes state on each **falling edge of CK**.\n- It acts as a **negative-edge-triggered T flip-flop**.\n- It can be used as a **frequency divider**: output frequency = clock frequency / 2.\n\n### State Table\n| CK | Q(next) |\n|---|---|\n| 1 | Q (hold) |\n| 0 | \\(\\overline{Q}\\) (toggle) |\n\n### Note\nThe circuit is **dynamic** because the state is stored on the parasitic capacitances at the inverter inputs when the switches are off. If both switches were closed simultaneously, the three-inverter loop would oscillate; the complementary clocks CK and \\(\\overline{CK}\\) prevent this and define a controlled toggle action.",
        "format": "markdown",
        "sha256": "434aa21d5f2bffe5810d1fcb3eea59e8fe2efbf5163467521b67d4332dae96c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic-latch divide-by-two circuit and states that its output frequency is half the clock frequency, satisfying the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 670,
        "output_tokens": 15859,
        "total_tokens": 16529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 670,
        "output_tokens": 15859,
        "total_tokens": 16529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a **clocked feedback loop** made of two switches and three inverters. It is a **dynamic, negative-edge-triggered T flip-flop / divide-by-2 counter**.\n\n## Circuit arrangement\n\nFrom left to right:\n\n- A switch controlled by **CK**\n- Inverter **Inv₁**\n- A switch controlled by **CK̄** (complementary clock)\n- Two cascaded inverters acting as a **non-inverting buffer**\n- Output **Q** is fed back to the input of the first switch\n\nSo the loop is:\n\n\\[\nQ \\rightarrow \\text{CK switch} \\rightarrow \\text{Inv}_1 \\rightarrow \\text{CK̄ switch} \\rightarrow \\text{two inverters} \\rightarrow Q\n\\]\n\nThere is no external data input; the output is fed back to the input.\n\n## Operation\n\nAssume ideal switches and complementary clocks.\n\n### CK = 1\n- First switch ON, second switch OFF.\n- The feedback value \\(Q\\) is applied to Inv₁, so its output becomes \\(\\overline{Q}\\).\n- The right-hand two-inverter buffer is isolated. Its input node holds its previous charge, so \\(Q\\) holds its previous state.\n- This is a **hold phase**.\n\n### CK = 0\n- First switch OFF, second switch ON.\n- The value present at the input of Inv₁ is held on the parasitic capacitance of that node.\n- Inv₁ inverts this held value, and the result passes through the second switch.\n- The two right-hand inverters invert twice, so they do not invert overall; therefore the new output is the complement of the held value.\n\nIf the output was \\(Q_{\\text{old}}\\), then after the clock falls:\n\n\\[\nQ_{\\text{new}} = \\overline{Q_{\\text{old}}}\n\\]\n\nThus the output toggles on every **falling edge of CK**.\n\n## Function\n\nWith a continuous clock, the output changes state once per clock cycle, so the output frequency is:\n\n\\[\nf_{\\text{out}} = \\frac{f_{\\text{CK}}}{2}\n\\]\n\nTherefore the circuit acts as a:\n\n- **Toggle flip-flop / T flip-flop** with \\(T=1\\)\n- **Divide-by-2 counter**\n- **Negative-edge-triggered** clocked storage element\n\n## Important characteristics\n\n- It is **dynamic**, not static: state is stored only on parasitic capacitances at the high-impedance nodes. Charge leakage means the clock cannot be stopped indefinitely without losing the state.\n- It has a **minimum operating frequency** set by leakage and charge-sharing effects.\n- The two right-hand inverters are needed to make the overall feedback inversion odd, producing toggling instead of a static latch. If there were only one inverter on the right, the loop would have even inversion and would act as a static latch instead.\n- If the first switch input were driven by an external data signal \\(D\\) instead of feedback, the same topology would be a **negative-edge-triggered inverting D flip-flop**. With the feedback connection as shown, it becomes a **T flip-flop**.",
        "format": "markdown",
        "sha256": "efa65f89ca83e769d018b61199913d229a65e1e4c51c5c25cbcdaf698d3e470f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic divide-by-two circuit and describes its output toggling at half the clock frequency. The golden solution explicitly grants full credit for this identification; the extra internal-path details are secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 670,
        "output_tokens": 19745,
        "total_tokens": 20415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 670,
        "output_tokens": 19745,
        "total_tokens": 20415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter acts as a **weak keeper / feedback inverter** for the latch stage around \\(\\mathrm{Inv}_1\\).\n\n**Effect on performance:**\n\n- **Improves state holding:** When the clock turns off and the input switch opens, the red inverter provides feedback to hold the previous logic level at the \\(\\mathrm{Inv}_1\\) input/output node. This prevents the dynamic node from floating and losing its state due to leakage.\n- **Allows DC/low-frequency operation:** Because the state is actively held, the circuit can operate at very low clock frequencies (down to DC), unlike a purely dynamic latch that requires a minimum clock rate to refresh.\n- **Increases delay:** During switching, the main inverter/input path must overpower the keeper’s holding current. This contention slows down the transition and increases propagation delay.\n- **Increases power:** The brief contention during transitions causes short-circuit/crowbar current, increasing dynamic power dissipation.\n- **Adds area/capacitance:** It adds extra transistors and input/output capacitance to the node.\n\nSo, the red inverter improves **robustness and noise margin** but degrades **speed and power**; it must be sized weaker than the main devices so that it can be reliably overwritten during evaluation.",
        "format": "markdown",
        "sha256": "49939dc755acf1323a7ff7a2d84297a9bd37ecae6a19791f142c60866b784518"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as a keeper rather than an unclocked feedforward path, and claims it enables low-frequency/DC operation. The actual branch improves high-speed operation but can overpower the main path at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 616,
        "output_tokens": 13652,
        "total_tokens": 14268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13396,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 616,
        "output_tokens": 13652,
        "total_tokens": 14268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13396,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is a **feedback/keeper inverter**. It provides a path from the input side back to the first inverter’s output/input node, so it keeps that internal node from floating when the clock switches are off.\n\nEffect on performance:\n\n- **Improves reliability:** It holds the stored state and increases noise margin, so the latch is less sensitive to leakage, charge sharing, and noise. It effectively makes the dynamic node static.\n- **Degrades speed:** It adds capacitance to the internal nodes and, during switching, can contend with the main inverter that is trying to change the node. The input must overpower this feedback, increasing propagation delay and setup/hold requirements.\n- **Increases power:** The contention during transitions causes extra short-circuit/ crowbar current, raising dynamic and static power consumption.\n- **Trade-off:** Usually the red inverter is made **weak** (minimum-size) relative to the main inverters. If it is too strong, it can prevent correct latching or even cause oscillation/contention; if it is weak, the speed and power penalty is small but the keeper action remains.\n\nSo overall: the red inverter improves noise immunity and state retention, but it slows the circuit and increases power unless properly weakened.",
        "format": "markdown",
        "sha256": "c62f096fd5e1c8acf52a9e3cba90638381d57d18815f238f4b52c1ba83729ab5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a keeper and misses its feedforward path, which bypasses part of the first latch and improves high-speed operation. It also misses the key low-frequency drawback that the unclocked branch can overpower the main path and raise the minimum usable clock frequency. Its mention of contention or oscillation is a small relevant point, but the main explanation and performance conclusion are wrong.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 616,
        "output_tokens": 20887,
        "total_tokens": 21503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 616,
        "output_tokens": 20887,
        "total_tokens": 21503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is connected between the input node of the first stage (left of the CK switch) and the output node of Inv1. It therefore provides an **always-on inverting path in parallel with the first inverter** (or acts as the first stage when the CK switch is open).\n\nIts main effects on performance are:\n\n- **Increases oscillation frequency:** When the CK switch is closed, the red inverter and Inv1 drive the same output node in parallel, reducing the effective delay of the first stage. When the CK switch is open, the red inverter alone keeps the loop gain/phase condition satisfied, allowing oscillation to continue. Thus it reduces the total loop delay and increases frequency.\n- **Keeps the oscillator alive / prevents floating nodes:** Since the red inverter is not switched off, it prevents the first-stage output from floating when CK is low, which improves start-up robustness and maintains oscillation.\n- **Increases power consumption:** Because it is always connected, it contributes additional dynamic and short-circuit power, especially while the oscillator is running. It is not power-gated like the switched inverter.\n- **Adds loading:** It adds input capacitance at the left node and output capacitance at the first-stage output. Depending on sizing, this can slightly slow the adjacent stages, but usually the increased drive strength dominates and the net frequency increases.\n\nIn short, the red inverter **improves speed and reliability by providing a parallel/always-on inverting path, at the cost of higher power dissipation**.",
        "format": "markdown",
        "sha256": "062b71cf694aa3b1bbf7821930d1fb62cf84ed2828bb6b63ad7bf84b9a77360e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the always-on feedforward path and its speed benefit, but incorrectly describes it as keeping the oscillator alive when the CK switch is open. The key low-frequency drawback is missing: the unclocked branch can overpower the main path and raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 614,
        "output_tokens": 25845,
        "total_tokens": 26459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 614,
        "output_tokens": 25845,
        "total_tokens": 26459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Partly. I’d agree that the red inverter is best described as a **keeper / static-feedback inverter**, but I wouldn’t be completely satisfied with the wording “forming a cross-coupled latch with Inv1” unless the drawing is interpreted that way.\n\nIts actual role is:\n\n- It provides **weak positive feedback** around the dynamic node.\n- When the clock switches turn off, the input of `Inv1` (or the dynamic node) would otherwise float and slowly lose its state due to leakage.\n- The red inverter supplies a small holding current, so the latch can retain its state even at very low clock frequency, effectively removing the leakage-imposed minimum clock frequency.\n- Therefore the latch becomes **pseudo-static** or “keepered,” rather than purely dynamic.\n\nImportant caveat: the red inverter must be **weaker** than the devices that write the node. If it is a full-strength inverter, it will fight the input switch during evaluation, increase power, and can even cause contention/oscillation. Also, if its input is taken from the final output through the downstream inverters rather than directly from `Inv1`’s output, it is not strictly a local cross-coupled pair with `Inv1`; it forms a feedback loop around a larger part of the circuit. Its intended purpose, though, is still to hold the state and prevent leakage-induced loss.",
        "format": "markdown",
        "sha256": "dad0fb0d51ef62380220139a486c6c3f1e14792559546dbb94983d6eeee44c66"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a keeper and claims it removes the minimum-frequency limit. In the actual circuit it is an unclocked feedforward branch that bypasses part of the latch path; it can help at high speed but can overpower the intended latch behavior at low clock rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 659,
        "output_tokens": 25747,
        "total_tokens": 26406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25463,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 659,
        "output_tokens": 25747,
        "total_tokens": 26406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25463,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, I largely agree with that answer, but it is worth being precise about the role.\n\nThe red inverter is a **weak keeper / feedback inverter** for the clocked dynamic latch. It does not perform a logic inversion in the signal path during normal clocking; its job is to hold the state of the dynamic node when the clock switch is off.\n\nHow it works:\n\n- When `CK` is high, the input switch is on, so the input of `Inv1` is driven by the feedback node. The red inverter is then effectively overdriven by the main path; it is made weak so it does not fight the clocked input.\n- When `CK` goes low and the first switch turns off, the input node of `Inv1` would otherwise float. Charge leakage could make it drift and corrupt the stored state, which is why a minimum clock frequency is normally needed.\n- The red inverter provides a small feedback path that reinforces the stored level. With the two-inverter slave loop, its input follows the output of `Inv1` during the hold phase, so it forms a cross-coupled-like latch with `Inv1`.\n\nSo the practical answer is:\n\n- **Yes**, the red inverter is a keeper/feedback inverter.\n- It makes the dynamic latch “pseudo-static.”\n- It removes the minimum-clock-frequency requirement caused by leakage.\n- Strictly speaking, it is not a logic inverter in the forward path; it should be weak enough that the clocked input can override it when `CK` is active.",
        "format": "markdown",
        "sha256": "b4d98dd5660145f43aa082542ecc5d97774a658d81de38eff1d7102488c80142"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer repeats the incorrect keeper/cross-coupled-latch interpretation and claims it removes the minimum-frequency limit. It misses the red inverter’s actual feedforward role and its low-frequency failure tradeoff.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 640,
        "input_tokens": 659,
        "output_tokens": 25262,
        "total_tokens": 25921,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 640,
        "input_tokens": 659,
        "output_tokens": 25262,
        "total_tokens": 25921,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—not as drawn, and not in the way the quoted answer says.\n\nLet the left feedback node be \\(A\\) (the node fed back from the final output) and the node after the first inverter be \\(B\\).\n\nThe red inverter has its input at \\(A\\) and its output at \\(B\\). Therefore:\n\n- When the first switch is closed, the red inverter and `Inv1` see the same input and drive the same output node \\(B\\). They are **in parallel**, not cross-coupled. Two inverters form a cross-coupled latch only when the output of one is connected to the input of the other; that is not the case here.\n- When the first switch is open, the red inverter bypasses that switch and forces  \n  \\[\n  B=\\overline A.\n  \\]\n  If the second switch is closed at the same time, the path through the red inverter, the second switch, and the two following inverters forms a closed loop with an odd number of inversions. That is not a bistable keeper; it is an inverting feedback/ring-type loop. In a divider/toggle configuration, this is what makes the circuit change state each clock phase. If the clock is stopped with that loop closed, it can oscillate or sit at an invalid/metastable level—not statically hold a digital state.\n\nMore generally, the red inverter is a **feed-forward/feedback inverter that sets the intermediate node to the complement of the output**. In a dynamic flip-flop/frequency-divider it provides the inverted feedback needed to make the stage toggle/divide by two, or to precharge/speed up that internal node. It is not a cross-coupled keeper with `Inv1`.\n\nAlso, it does **not** remove the minimum clock-frequency requirement. The actual dynamic nodes are the isolated inputs of the inverters when the corresponding switches are open. A true keeper must be connected across such a node, with the correct feedback polarity, usually as a weak inverter from the stage output back to the floating input, or as a clocked keeper. The red inverter is connected before the first switch, so it cannot hold the floating input of `Inv1`; and it does not hold the floating input of the following inverter when the \\(\\overline{CK}\\) switch is open. Thus leakage on those nodes is still a concern.\n\nA concise statement would be:\n\n> The red inverter is not a keeper cross-coupled with `Inv1`. It is a feedback/bypass inverter that forces the intermediate node to be the inverse of the fed-back output. In a divider it makes the circuit toggle; it is not a static keeper and does not by itself eliminate the minimum clock frequency. A real keeper would have to be connected output-to-input around each dynamic storage node, with the proper polarity, and usually made weak or clocked to avoid contention.",
        "format": "markdown",
        "sha256": "6ba093c9d7d3f63f6de51dbb6ce4e3c8b923c439e12cdf35f3df3ff6bea2d91d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and recognizes a feedforward bypass, but misstates its role as making the divider toggle and attributes the frequency limit to leakage. It misses the key tradeoff: the branch can speed high-rate operation but overpower the intended latch at low rates, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 657,
        "output_tokens": 50647,
        "total_tokens": 51304,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 50065,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 657,
        "output_tokens": 50647,
        "total_tokens": 51304,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 50065,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this shunt-feedback CMOS inverter LNA, with \\(R_s=50\\,\\Omega\\), the input match is approximately\n\n\\[\nR_{in}\\approx \\frac{R_F}{1+(g_{m1}+g_{m2})R_o}=50\\,\\Omega\n\\]\n\nso the feedback resistor must be\n\n\\[\nR_F \\approx 50\\bigl[1+(g_{m1}+g_{m2})R_o\\bigr].\n\\]\n\nThe noise factor is approximately\n\n\\[\nF \\approx 1+\\frac{\\gamma}{(g_{m1}+g_{m2})R_s}+\\frac{R_s}{R_F}\n\\]\n\nwhere the first noise term is from M1/M2 channel thermal noise and the second is from the feedback resistor \\(R_F\\). Substituting \\(R_s=50\\Omega\\) and the matched \\(R_F\\) gives\n\n\\[\nF \\approx 1+\\frac{\\gamma}{(g_{m1}+g_{m2})50}\n+\\frac{1}{1+(g_{m1}+g_{m2})R_o}.\n\\]\n\nBoth terms decrease as \\(g_{m1}+g_{m2}\\) and \\(R_o\\) increase. Therefore, to optimize NF while keeping \\(R_{in}=50\\Omega\\):\n\n- Increase the total transconductance \\(g_{m1}+g_{m2}\\), e.g. by increasing the widths/bias current of M1 and M2.\n- Increase the output resistance \\(R_o\\), e.g. by using longer channel lengths or cascoding, so that a larger \\(R_F\\) can be used for the same 50Ω input match.\n- Increase \\(R_F\\) accordingly; larger \\(R_F\\) reduces the feedback resistor’s noise contribution.\n- Keep \\(C_1\\) large enough to act as an AC short at the operating frequency.\n- In practice, do not make the devices arbitrarily wide: too large \\(W\\) increases input capacitance and can degrade the input match and high-frequency NF. There is an optimum width for a given bandwidth.\n\nIn short: **maximize \\(g_{m1}+g_{m2}\\) and \\(R_o\\), and set \\(R_F=50[1+(g_{m1}+g_{m2})R_o]\\) to maintain \\(R_{in}=50\\Omega\\).**",
        "format": "markdown",
        "sha256": "8ed6602257d92f09e51c9da37a48ee10080ee6cbf31c90fe279150db2f6f3391"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the key co-optimization: raise total gm and adjust RF (with finite ro) to preserve the 50-ohm match, reducing the stated noise terms and allowing NF below 1+γ. The omitted +ro numerator is a high-loop-gain approximation and does not change the design conclusion.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1039,
        "output_tokens": 29067,
        "total_tokens": 30106,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28591,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1039,
        "output_tokens": 29067,
        "total_tokens": 30106,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28591,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize this CMOS inverter with shunt feedback for noise figure while keeping \\(R_{\\text{in}}=50\\,\\Omega\\):\n\n\\[\nR_{\\text{in}}=\\frac{R_F+r_o}{1+(g_{m1}+g_{m2})r_o}=50\\,\\Omega\n\\]\n\nso the feedback resistor must be\n\n\\[\nR_F=50\\bigl[1+(g_{m1}+g_{m2})r_o\\bigr]-r_o\n\\]\n\nwhere \\(r_o=r_{o1}\\parallel r_{o2}\\).\n\nA simplified low-frequency noise factor is\n\n\\[\nF \\approx 1+\n\\frac{\\gamma}{(g_{m1}+g_{m2})R_s}\n+\n\\frac{R_s}{R_F}\n\\]\n\nwith \\(R_s=50\\,\\Omega\\). Therefore, to minimize NF:\n\n1. **Maximize the total transconductance**  \n   \\[\n   G_m=g_{m1}+g_{m2}\n   \\]\n   This reduces the channel thermal noise term \\(\\gamma/(G_mR_s)\\). Increase \\(W/L\\) of both M1 and M2 and/or increase bias current.\n\n2. **Maximize the output resistance**  \n   \\[\n   r_o=r_{o1}\\parallel r_{o2}\n   \\]\n   Use longer channel lengths to increase \\(r_o\\). This also allows a larger \\(R_F\\) for the same \\(50\\,\\Omega\\) input resistance, reducing the feedback resistor noise term \\(R_s/R_F\\).\n\n3. **Make \\(R_F\\) as large as possible**  \n   From the matching equation, \\(R_F\\) increases with the loop gain \\((g_{m1}+g_{m2})r_o\\). So maximize the inverter gain. Avoid making \\(R_F\\) close to \\(50\\,\\Omega\\), because that gives almost no gain and poor NF.\n\n4. **Size M1 and M2 for high \\(g_m/I_D\\)**  \n   Bias both devices in moderate inversion. M2 is PMOS, so it needs a larger width than M1 to achieve comparable \\(g_m\\) because of lower mobility.\n\n5. **If low-frequency noise matters, increase gate area**  \n   Larger \\(WL\\) reduces flicker noise, but this trades off with capacitance and bandwidth.\n\nIn short: **maximize \\(g_{m1}+g_{m2}\\) and \\(r_{o1}\\parallel r_{o2}\\)**, then choose \\(R_F\\) from\n\\[\nR_F=50[1+(g_{m1}+g_{m2})r_o]-r_o\n\\]\nto keep \\(R_{\\text{in}}=50\\,\\Omega\\). The NF improves monotonically as the loop gain and total \\(g_m\\) increase, so the practical limit is set by bandwidth, power, and device capacitances.",
        "format": "markdown",
        "sha256": "36ad55749e9cbbd807de2cc25fc5c327589dd8df5235155109ff5b59452ca730"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Uses the finite-\u00160\u0000\u0000\u0000\u0000\u0000output-resistance input-match relation and adjusts RF while increasing total gm and ro. This captures the key optimization: gm can exceed 1/Rs, allowing NF to fall below 1+\u0003\u0000\u0000\u0000\u0000\u0000gamma; the approximate noise expression supports the same trend.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1039,
        "output_tokens": 30312,
        "total_tokens": 31351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1039,
        "output_tokens": 30312,
        "total_tokens": 31351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume low-frequency operation and that \\(C_1\\) is an ac short. The feedback resistor \\(R_F\\) sets the input resistance:\n\n\\[\nR_{\\rm in}=\\frac{R_F}{1+|A_v|}\n\\]\n\nwhere \\(A_v\\) is the voltage gain from the input node to the output.  \nFor \\(R_{\\rm in}=50\\Omega\\),\n\n\\[\nR_F=50\\bigl(1+|A_v|\\bigr)\n\\]\n\nso \\(R_F\\) is not independent of the gain.\n\nMain noise contributions:\n\n- Source resistance: \\(4kT R_s\\)\n- Feedback resistor: thermal current noise \\(i_{n,RF}^2=4kT/R_F\\)\n- MOSFETs M1 and M2: channel thermal noise \\(i_{n,M}^2=4kT\\gamma(g_{m1}+g_{m2})\\)\n\nReferred to the input, the MOSFET noise is approximately\n\n\\[\n\\overline{v_{n,M}^2}\\approx \\frac{4kT\\gamma}{g_{m1}+g_{m2}}\n\\]\n\nand the feedback resistor noise contribution is approximately\n\n\\[\n\\overline{v_{n,RF}^2}\\approx \\frac{4kT R_s^2}{R_F}\n=\\frac{4kT R_s}{1+|A_v|}\n\\]\n\nThus the noise factor is roughly\n\n\\[\nF\\approx 1+\\frac{\\gamma}{(g_{m1}+g_{m2})R_s}\n+\\frac{1}{1+|A_v|}\n\\]\n\nSo to optimize NF while keeping \\(R_{\\rm in}=50\\Omega\\):\n\n1. **Maximize \\(g_{m1}+g_{m2}\\)**  \n   Increase device width/bias current so the input transistors have high total transconductance. This directly lowers the input-referred channel noise.\n\n2. **Maximize the gain \\(|A_v|\\approx(g_{m1}+g_{m2})r_o\\)**  \n   A higher gain allows a larger \\(R_F\\) for the same \\(50\\Omega\\) input match, reducing the noise contribution of \\(R_F\\). Use longer channel lengths or cascoding, if allowed, to increase \\(r_o\\).\n\n3. **Then set**  \n   \\[\n   R_F=50\\bigl(1+|A_v|\\bigr)\n   \\]\n   after the gain is maximized.\n\nIn short: maximize the transconductance and voltage gain of the input stage, then let the feedback resistor take the value required for \\(50\\Omega\\) input match. The larger the achievable gain, the closer the NF is to the ideal low-noise limit.",
        "format": "markdown",
        "sha256": "b8eadf94e272efa2ee6761d7db0a3d62ba5890f574696eac1b82e7f89fe60fd6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly recommends increasing gm and gain while raising RF to preserve the 50Ω match, so the MOS noise falls and the feedback-resistor noise is reduced. Its gain-based match is approximate rather than the explicit finite-ro formula, but it captures the required trend and is consistent with the full-credit rule.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1039,
        "output_tokens": 29051,
        "total_tokens": 30090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28515,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1039,
        "output_tokens": 29051,
        "total_tokens": 30090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28515,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the input node be \\(P\\), with small-signal voltage \\(V_i\\).  \nThe current source \\(I_{in}\\) feeds node \\(P\\); the current through \\(R_F\\) is  \n\\[\n\\frac{V_i-V_{out}}{R_F}.\n\\]\nKCL at the input node gives\n\\[\nI_{in}=V_i\\left(sC_{in}+\\frac{1}{R_{in}}\\right)+\\frac{V_i-V_{out}}{R_F}.\n\\]\nThus\n\\[\nZ_{in}(s)=\\frac{V_i}{I_{in}}\n=\\left[sC_{in}+\\frac{1}{R_{in}}+\\frac{1}{R_F}\\left(1-\\frac{V_{out}}{V_i}\\right)\\right]^{-1}.\n\\]\n\nLet the open-loop voltage gain from \\(P\\) to \\(V_{out}\\) be \\(A_v=V_{out}/V_i\\).  \nFor the two-stage amplifier,\n\\[\nA_v \\approx -g_{m1}R_X\\,g_{m3}R_{D2},\n\\]\nwhere\n\\[\nR_X=R_{D1}\\parallel \\frac{1}{g_{m2}}\n\\]\n(neglecting transistor output resistances; including them,\n\\(R_X=R_{D1}\\parallel r_{o1}\\parallel r_{o2}\\parallel 1/g_{m2}\\)).\n\nTherefore, using Miller’s theorem for the feedback resistor,\n\\[\nZ_{in}(s)=\\left[sC_{in}+\\frac{1}{R_{in}}\n+\\frac{1+g_{m1}g_{m3}R_X R_{D2}}{R_F}\\right]^{-1}.\n\\]\n\nIf \\(M_2\\) is neglected or its loading is small, this reduces to\n\\[\n\\boxed{\nZ_{in}(s)=\\left[sC_{in}+\\frac{1}{R_{in}}\n+\\frac{1+g_{m1}g_{m3}R_{D1}R_{D2}}{R_F}\\right]^{-1}\n}\n\\]\nwith \\(R_X=R_{D1}\\parallel 1/g_{m2}\\) if the diode-connected \\(M_2\\) loading is included.",
        "format": "markdown",
        "sha256": "7a4b098f9685ef45c88253943971faa5a64b80c4dbaf68f24cdd18df45c452a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes Miller feedback and the qualitative input-resistance reduction, but its result omits the essential output-resistance term: the exact result is (RF + RD2)/(1 + A0). Its gain model also does not match the specified two-stage gain, and the added Cin/Rin terms do not fix these errors.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 241,
        "output_tokens": 53565,
        "total_tokens": 53806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 241,
        "output_tokens": 53565,
        "total_tokens": 53806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(V_p\\) be the small-signal input voltage and \\(V_o\\) the output voltage.  \nThe current-source input gives\n\\[\nI_{in}=sC_{in}V_p+\\frac{V_p-V_o}{R_F}\n= V_p\\left(sC_{in}+\\frac{1-A_v}{R_F}\\right),\n\\]\nwhere \\(A_v=V_o/V_p\\).\n\nNow find \\(A_v=V_o/V_p\\) using the small-signal model. Neglecting transistor output resistances \\(r_o\\):\n\n- M1 common-source:\n\\[\nV_x=-g_{m1}R_{D1}V_p\n\\]\n- M2/M3 stage: M2 acts as a source follower driving M3, so\n\\[\nV_y=\\frac{g_{m2}}{g_{m2}+g_{m3}}V_x\n\\]\nand the current fed into the output by M3 is\n\\[\nI_o=g_{m3}V_y\n= -G_m g_{m1}R_{D1}V_p,\n\\]\nwhere\n\\[\nG_m=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}.\n\\]\n\nAt the output node,\n\\[\nI_o=\\frac{V_o}{R_{D2}}+\\frac{V_o-V_p}{R_F}.\n\\]\nSolving for \\(A_v=V_o/V_p\\),\n\\[\nA_v=\\frac{\\frac1{R_F}-G_m g_{m1}R_{D1}}{\\frac1{R_{D2}}+\\frac1{R_F}}.\n\\]\n\nThus\n\\[\n1-A_v=\\frac{\\frac1{R_{D2}}+G_m g_{m1}R_{D1}}{\\frac1{R_{D2}}+\\frac1{R_F}},\n\\]\nso\n\\[\n\\frac{1-A_v}{R_F}\n=\\frac{1+G_m g_{m1}R_{D1}R_{D2}}{R_F+R_{D2}}.\n\\]\n\nThe input admittance is\n\\[\nY_{in}=\\frac{I_{in}}{V_p}\n=sC_{in}+\\frac{1+G_m g_{m1}R_{D1}R_{D2}}{R_F+R_{D2}}.\n\\]\n\n\\[\n\\boxed{\nZ_{in}(s)=\n\\left[\nsC_{in}+\n\\frac{1+\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\,g_{m1}R_{D1}R_{D2}}\n{R_F+R_{D2}}\n\\right]^{-1}\n}\n\\]\n\nIf M2 is assumed to be an ideal buffer, replace  \n\\[\n\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\quad\\text{by}\\quad g_{m3}.\n\\]\n\nSo the input impedance is mainly a capacitance \\(C_{in}\\) in parallel with an equivalent resistance\n\\[\nR_{in}=\\frac{R_F+R_{D2}}{1+\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\,g_{m1}R_{D1}R_{D2}}.\n\\]",
        "format": "markdown",
        "sha256": "53cd2bec41f1f85e829157859323ff483351dd0a79e7ee7441046432c6088364"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer gives the exact finite-RD2 Miller form, Rin = (RF + RD2)/(1 + A0), and its effective M2/M3 transconductance yields the required half-gm term for a matched pair. The added input capacitance is ancillary and does not change the resistance result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 241,
        "output_tokens": 42596,
        "total_tokens": 42837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35908,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 241,
        "output_tokens": 42596,
        "total_tokens": 42837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35908,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming small-signal operation, neglecting MOSFET output resistances, and using\n\\[\nG_m=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\n\\]\nfor the PMOS differential pair \\(M_2-M_3\\), the open-loop gain magnitude from the input node to the output is\n\\[\nA_0=g_{m1}R_{D1}R_{D2}G_m\n =g_{m1}R_{D1}R_{D2}\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}.\n\\]\n\nApplying KCL at the output node gives\n\\[\n\\frac{v_{\\rm out}}{v_p}=\\frac{R_{D2}-A_0R_F}{R_{D2}+R_F}.\n\\]\nThen KCL at the input node \\(P\\):\n\\[\ni_{\\rm in}=\\frac{v_p}{R_{\\rm in}}+sC_{\\rm in}v_p+\\frac{v_p-v_{\\rm out}}{R_F}.\n\\]\nSubstituting \\(v_{\\rm out}/v_p\\),\n\\[\nY_{\\rm in}=\\frac{i_{\\rm in}}{v_p}\n=\\frac{1}{R_{\\rm in}}+sC_{\\rm in}+\\frac{1+A_0}{R_{D2}+R_F}.\n\\]\n\nTherefore the input impedance is\n\\[\n\\boxed{\nZ_{\\rm in}(s)=\n\\left[\n\\frac{1}{R_{\\rm in}}+sC_{\\rm in}+\\frac{1+A_0}{R_{D2}+R_F}\n\\right]^{-1}\n}\n\\]\nwith\n\\[\n\\boxed{\nA_0=g_{m1}R_{D1}R_{D2}\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\n}\n\\]\nand if \\(g_{m2}=g_{m3}=g_m\\), then\n\\[\nA_0=\\frac{1}{2}g_{m1}g_m R_{D1}R_{D2}.\n\\]\n\nAt low frequencies, \\(sC_{\\rm in}\\approx0\\), so\n\\[\n\\boxed{\nZ_{\\rm in}(0)=\nR_{\\rm in}\\parallel \\frac{R_{D2}+R_F}{1+A_0}\n}\n\\]\nand for \\(A_0\\gg1,\\;R_F\\gg R_{D2}\\),\n\\[\n\\boxed{\nZ_{\\rm in}(0)\\approx\nR_{\\rm in}\\parallel \\frac{R_F}{A_0}\n}.\n\\]",
        "format": "markdown",
        "sha256": "20fded35561a7fade969c3793c0d8bf1d77badc64c13965f0ae6acd786ae7e99"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly derives the feedback-path input resistance, (RF + RD2)/(1 + A0), and gives an equivalent gain expression. However, it adds unsupported Rin and Cin shunt terms, so its boxed total input impedance does not match the circuit model in the golden solution.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 243,
        "output_tokens": 30274,
        "total_tokens": 30517,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29736,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 243,
        "output_tokens": 30274,
        "total_tokens": 30517,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29736,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO noise at \\(V_{\\rm out}\\) is a supply voltage noise  \n\\[\nv_n(t), \\qquad S_{v_n}(f)=S_{\\rm th}\\ \\text{(usually one-sided, V}^2/\\text{Hz)}\n\\]\nTo find its contribution to VCO phase noise, first determine the VCO’s **supply pushing**:\n\\[\nK_{\\rm VCO}=\\frac{\\partial f_{\\rm osc}}{\\partial V_{\\rm out}}\\quad \\text{(Hz/V)}\n\\]\nor, in angular frequency,\n\\[\nK_\\omega=\\frac{\\partial \\omega_{\\rm osc}}{\\partial V_{\\rm out}}=2\\pi K_{\\rm VCO}\\quad \\text{(rad/s/V)}.\n\\]\n\nThe LDO noise frequency-modulates the VCO:\n\\[\nf(t)=f_0+K_{\\rm VCO}v_n(t)\n\\]\nso the excess phase is\n\\[\n\\phi(t)=2\\pi K_{\\rm VCO}\\int v_n(t)\\,dt.\n\\]\n\nFor a white thermal noise spectrum \\(S_{\\rm th}\\) (one-sided), the single-sideband phase noise at offset \\(\\Delta f\\) is\n\\[\n\\boxed{\n\\mathcal L(\\Delta f)\n=\n10\\log_{10}\\!\\left(\n\\frac{K_{\\rm VCO}^2\\,S_{\\rm th}}{2\\Delta f^2}\n\\right)\n\\ \\text{dBc/Hz}\n}\n\\]\nIf \\(K_\\omega\\) is used instead of \\(K_{\\rm VCO}\\), this is equivalently\n\\[\n\\boxed{\n\\mathcal L(\\Delta f)\n=\n10\\log_{10}\\!\\left(\n\\frac{K_\\omega^2\\,S_{\\rm th}}{8\\pi^2\\Delta f^2}\n\\right)\n\\ \\text{dBc/Hz}\n}\n\\]\n\nNotes:\n- If \\(S_{\\rm th}\\) is specified as a **two-sided** spectrum, omit the factor \\(2\\) in the denominator.\n- For non-white LDO noise, simply use \\(S_{\\rm th}(\\Delta f)\\) at each offset frequency:\n  \\[\n  \\mathcal L(\\Delta f)\n  =\n  10\\log_{10}\\!\\left(\n  \\frac{K_{\\rm VCO}^2\\,S_{\\rm th}(\\Delta f)}{2\\Delta f^2}\n  \\right).\n  \\]\n- More rigorously, the general result is\n  \\[\n  S_\\phi(\\Delta f)=|H_{V_{\\rm out}\\to\\phi}(\\Delta f)|^2 S_{\\rm th}(\\Delta f),\n  \\]\n  where \\(H_{V_{\\rm out}\\to\\phi}\\) is the VCO’s small-signal transfer function from the LDO output to output phase, obtainable by periodic AC/PSS simulation or by using the supply-node impulse sensitivity function (ISF). The supply-pushing formula above is the low-frequency limit of that transfer function and is usually adequate for LDO thermal noise.",
        "format": "markdown",
        "sha256": "aa5a75f6578cd6d08daa3d39eccbe41f62be6ca548c29c23407fe5dbff76514d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing, converts LDO voltage noise to frequency noise, and gives the FM-to-phase-noise relation with the correct offset-frequency dependence. It omits the circuit-specific insight that the supply acts directly on the varactors, making the pushing sensitivity closely related to KVCO and reducible by lowering KVCO.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1002,
        "output_tokens": 23370,
        "total_tokens": 24372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22765,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1002,
        "output_tokens": 23370,
        "total_tokens": 24372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22765,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume the LDO output noise is a low-frequency voltage noise at the VCO supply \\(V_{\\rm out}\\) with one-sided PSD \\(S_{\\rm th}\\) (V²/Hz).\n\nDefine the VCO supply pushing:\n\n\\[\nK_{\\rm VCO}=\\frac{\\partial f_0}{\\partial V_{\\rm out}}\\quad \\text{(Hz/V)}\n\\]\n\nor in angular frequency,\n\n\\[\nK_\\omega=\\frac{\\partial \\omega_0}{\\partial V_{\\rm out}}=2\\pi K_{\\rm VCO}\\quad \\text{(rad/s/V)}.\n\\]\n\nA small LDO noise voltage \\(v_n(t)\\) produces an instantaneous frequency deviation\n\n\\[\n\\Delta f(t)=K_{\\rm VCO}v_n(t).\n\\]\n\nSince phase is the integral of frequency, the phase-noise PSD at offset \\(f_m\\) is\n\n\\[\nS_\\phi(f_m)=\\frac{K_{\\rm VCO}^2 S_{\\rm th}}{f_m^2}.\n\\]\n\nThe single-sideband VCO output phase noise is therefore\n\n\\[\n\\boxed{\\mathcal L(f_m)=10\\log_{10}\\!\\left(\\frac{K_{\\rm VCO}^2 S_{\\rm th}}{2 f_m^2}\\right)\\ \\text{dBc/Hz}}\n\\]\n\nor equivalently, with angular offset \\(\\omega_m=2\\pi f_m\\),\n\n\\[\n\\boxed{\\mathcal L(\\omega_m)\n=10\\log_{10}\\!\\left(\\frac{K_\\omega^2 S_{\\rm th}}{2\\omega_m^2}\\right)\n=10\\log_{10}\\!\\left(\\frac{(2\\pi K_{\\rm VCO})^2 S_{\\rm th}}{2\\omega_m^2}\\right).}\n\\]\n\nSo, in words: measure/simulate the VCO’s supply-pushing coefficient \\(K_{\\rm VCO}=\\partial f_0/\\partial V_{\\rm out}\\), then multiply the LDO noise PSD \\(S_{\\rm th}\\) by \\(K_{\\rm VCO}^2\\), divide by \\(f_m^2\\), and include the usual factor \\(1/2\\) for SSB phase noise. If the LDO noise is not white, use the actual \\(S_{V_{\\rm out}}(f_m)\\) at the offset frequency.",
        "format": "markdown",
        "sha256": "c90f3d79f57a612224a0f0d4c3a89e4320679659d72640cc05ed7086b34b3d21"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing, uses the frequency sensitivity to convert LDO noise, and gives the expected 1/offset² phase-noise relation. It omits the circuit-specific design insight that supply noise acts directly on the varactors, making lower KVCO reduce this conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1002,
        "output_tokens": 14672,
        "total_tokens": 15674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1002,
        "output_tokens": 14672,
        "total_tokens": 15674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the dominant mechanism is **supply pushing**: the LDO’s noise voltage \\(v_n(t)\\) at \\(V_{\\text{out}}\\) modulates the varactor bias and hence the VCO instantaneous frequency.\n\nLet\n\n\\[\nS_{v_n}(f)=S_{th}(f)\n\\]\n\nbe the LDO output voltage-noise PSD. Define the VCO supply-pushing gain\n\n\\[\nK_{\\text{VCO}}=\\frac{\\partial f_0}{\\partial V_{\\text{out}}}\\quad \\text{(Hz/V)}.\n\\]\n\nThen the instantaneous frequency deviation is\n\n\\[\n\\Delta f(t)=K_{\\text{VCO}}\\,v_n(t),\n\\]\n\nso its PSD is\n\n\\[\nS_{\\Delta f}(f)=K_{\\text{VCO}}^2 S_{th}(f).\n\\]\n\nThe excess phase is\n\n\\[\n\\phi(t)=2\\pi\\int \\Delta f(t)\\,dt,\n\\]\n\nand for an offset frequency \\(\\Delta f_m\\),\n\n\\[\nS_\\phi(\\Delta f_m)=\\frac{K_{\\text{VCO}}^2 S_{th}(\\Delta f_m)}{\\Delta f_m^2}\n\\]\n\nif \\(S_{th}\\) is one-sided. The single-sideband phase noise is\n\n\\[\n\\boxed{\n\\mathcal L(\\Delta f_m)\n=\n10\\log_{10}\\!\\left(\n\\frac{K_{\\text{VCO}}^2 S_{th}(\\Delta f_m)}\n{2\\Delta f_m^2}\n\\right)\n\\ \\text{dBc/Hz}\n}\n\\]\n\nwhere \\(S_{th}\\) is the one-sided voltage-noise PSD in \\(\\text{V}^2/\\text{Hz}\\). If \\(S_{th}\\) is double-sided, omit the factor \\(2\\) in the denominator.\n\nFor LDO thermal noise, \\(S_{th}\\) is approximately white, so this gives a \\(1/\\Delta f_m^2\\) phase-noise slope: \\(-20\\ \\text{dB/decade}\\).\n\nMore accurately, one can use the ISF for the supply node \\(V_{\\text{out}}\\):\n\n\\[\nS_\\phi(\\Delta \\omega)\n=\n\\frac{1}{q_{\\max}^2\\Delta\\omega^2}\n\\sum_{n=-\\infty}^{\\infty}\n|\\Gamma_{\\text{VDD},n}|^2\nS_{th}(\\Delta\\omega-n\\omega_0),\n\\]\n\nbut for low-frequency supply pushing the simpler \\(K_{\\text{VCO}}\\) formula is usually the intended calculation.",
        "format": "markdown",
        "sha256": "9fc75c41968cd90539f3642652b458c61bfa05ad00788bd94729b497bd1f7ee4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing through the varactors, converts the LDO noise using the df/dVout sensitivity, and applies FM-to-phase conversion with the required 1/Δf² dependence. The phase-noise expression and KVCO-related design implication match the golden solution; factor conventions are secondary.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1002,
        "output_tokens": 13267,
        "total_tokens": 14269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1002,
        "output_tokens": 13267,
        "total_tokens": 14269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) at the tail node **reduces the phase noise** of the oscillator.\n\nWhy:\n\n- The tail node \\(P\\) is a common-source node. In differential operation, it is ideally a virtual ground at the oscillation frequency \\(\\omega_0\\), but it contains significant **second-harmonic** content at \\(2\\omega_0\\).\n- Noise from the tail current source \\(I_{SS}\\) around \\(2\\omega_0\\) can appear at node \\(P\\) and be mixed/upconverted by the nonlinear cross-coupled pair, contributing to phase noise.\n- \\(C_T\\) provides a low-impedance AC ground at \\(2\\omega_0\\), so this noise is shunted to ground instead of being injected into the LC tank.\n- At DC, \\(C_T\\) is open, so the bias current is unaffected. At \\(\\omega_0\\), it does not load the differential tank because the tail node is already a virtual ground differentially.\n\nSo, with a sufficiently large \\(C_T\\), the tail-current-source noise contribution is suppressed and the phase noise **improves**.",
        "format": "markdown",
        "sha256": "24960a37783d990d368f763477ae354cdf769c60c8e5e235cf9b77e9e89cedd6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that adding CT improves phase noise monotonically by shunting tail noise, missing the nonmonotonic behavior and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1004,
        "output_tokens": 5024,
        "total_tokens": 6028,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4801,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1004,
        "output_tokens": 5024,
        "total_tokens": 6028,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4801,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) at the tail node generally **reduces (improves) the phase noise**.\n\nIt acts as a low-impedance AC ground at the tail node, especially at \\(2\\omega_0\\). This filters/suppresses the high-frequency noise from the tail current source \\(I_{SS}\\) and reduces the second-harmonic voltage swing at node \\(P\\). As a result, the upconversion of tail current source noise into phase noise is reduced.\n\n**Answer: Phase noise decreases / improves.**",
        "format": "markdown",
        "sha256": "7521a745cef56a0ef744472ebdcd6e9c250b71765b55b7dad6f069e823ae7747"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Claims a monotonic phase-noise improvement from tail-node filtering, missing the nonmonotonic effect and the class-C improvement and possible degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1006,
        "output_tokens": 15406,
        "total_tokens": 16412,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15299,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1006,
        "output_tokens": 15406,
        "total_tokens": 16412,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15299,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) at the tail node **reduces (improves) the phase noise**.\n\nReason: \\(C_T\\) acts as an AC ground/bypass capacitor at the common-source node.  \n- It shunts high-frequency noise from the tail current source \\(I_{SS}\\) to ground, especially noise around \\(2\\omega_0\\), so less noise is injected into the cross-coupled pair and upconverted to phase noise.  \n- It suppresses the second-harmonic voltage swing at the tail node, which would otherwise mix with low-frequency/common-mode noise and contribute to phase noise.  \n\nThus, with an appropriately chosen \\(C_T\\), the tail current source noise contribution is filtered, and the oscillator phase noise decreases. If \\(C_T\\) is too large, it may affect start-up or common-mode behavior, but ideally it improves phase noise.",
        "format": "markdown",
        "sha256": "98ff33c6379f6757db32e6da94f63c85ec5e1abee4df6e8a82d6259362c54653"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims CT generally improves phase noise by filtering tail noise and suppressing ripple. It misses the nonmonotonic effect and the class-C improvement mechanism; its generic caveat about large CT does not capture the specified degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1004,
        "output_tokens": 8700,
        "total_tokens": 9704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1004,
        "output_tokens": 8700,
        "total_tokens": 9704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a quadrature LC oscillator. Its first-order oscillation frequency is set by the LC tank:\n\n\\[\nf_{\\rm osc}\\approx \\frac{1}{2\\pi\\sqrt{LC}}\n\\]\n\nwhere \\(L\\) is the tank inductance and \\(C\\) is the total effective capacitance at nodes \\(X_1,Y_1\\) (and \\(X_2,Y_2\\)). The current sources \\(I_{SS}\\) and \\(I_1\\) mainly affect the negative-\\(g_m\\) and coupling level, not the fundamental frequency.\n\nSince the figure gives no numerical values for \\(L\\) or \\(C\\), a numeric estimate cannot be made from the figure alone. If \\(L\\) and \\(C\\) are provided, use the formula above.",
        "format": "markdown",
        "sha256": "16fc1c45d1baabac2801607cf6fc313a602ddc0d81cff9c9d87b4ed1001a73a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The tank resonance is correctly identified, but the answer omits the coupling-induced frequency shift, which is central to the requested estimate, and incorrectly suggests the coupling has little effect on the oscillation frequency.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 989,
        "output_tokens": 14993,
        "total_tokens": 15982,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 989,
        "output_tokens": 14993,
        "total_tokens": 15982,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a pair of coupled cross-coupled LC oscillators (quadrature VCO). Each oscillator core uses two tank inductors from the supply to the two tank nodes \\(X_i,Y_i\\), and a cross-coupled transistor pair to supply the negative resistance.\n\nTo first order, the oscillation frequency is set by the LC tank resonance. If each inductor is \\(L\\) and the total effective capacitance between the differential tank nodes is \\(C\\), then the two inductors appear in series differentially, giving an equivalent inductance  \n\\[\nL_\\text{eq}=2L.\n\\]  \nSo the oscillation frequency is approximately\n\\[\n\\boxed{f_\\text{osc}\\approx \\frac{1}{2\\pi\\sqrt{2LC}}}\n\\]\nor, if the total tank inductance is defined as \\(L_\\text{tot}=2L\\),\n\\[\n\\boxed{f_\\text{osc}\\approx \\frac{1}{2\\pi\\sqrt{L_\\text{tot}C}} }.\n\\]\n\nThe current sources \\(I_{SS}\\) and \\(I_1\\) mainly set the bias/transconductance and coupling strength; they do not fundamentally determine the oscillation frequency. Without numerical values for \\(L\\) and \\(C\\), only this symbolic estimate can be given.",
        "format": "markdown",
        "sha256": "9ce944a268ac15239211e8185811842fe42d95c6495e8e7b14f9a85270682b9d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the LC tank resonance as the baseline, but omits the essential coupling-induced frequency shift and incorrectly implies the coupling currents do not materially affect the oscillation frequency.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 989,
        "output_tokens": 17475,
        "total_tokens": 18464,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 989,
        "output_tokens": 17475,
        "total_tokens": 18464,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "deepseek/deepseek-v4.1-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **quadrature LC VCO**: two identical LC-oscillator cores (top and bottom) are coupled to give outputs \\(X_1,Y_1\\) and \\(X_2,Y_2\\) in quadrature.\n\nTo first order, the oscillation frequency is set by the **LC tank resonance**, not by the bias/coupling currents \\(I_{SS}\\) or \\(I_1\\):\n\n\\[\n\\boxed{f_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{L_{\\text{eq}}C_{\\text{eq}}}}}\n\\]\n\nwhere  \n- \\(L_{\\text{eq}}\\) is the effective tank inductance,  \n- \\(C_{\\text{eq}}\\) is the total capacitance at nodes \\(X_i,Y_i\\) (including parasitic capacitance and any varactors).\n\nIf each tank inductor is labeled \\(L\\) and the tank capacitance is \\(C\\), then for a differential tank with two inductors the effective inductance is often taken as \\(2L\\), giving\n\n\\[\n\\boxed{f_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{2LC}}}\n\\]\n\nor equivalently  \n\\[\n\\boxed{\\omega_{\\text{osc}} \\approx \\frac{1}{\\sqrt{2LC}}}\n\\]\n\nA numerical value cannot be estimated without specific \\(L\\) and \\(C\\) values. The current sources \\(I_{SS}\\) and \\(I_1\\) mainly affect the negative resistance, start-up condition, and coupling strength rather than the first-order oscillation frequency.",
        "format": "markdown",
        "sha256": "cb13ac1f4ecfc2ebaa473e05a2852cb90b77aad790622eeb0cc0e8b6650188c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the LC tank resonance as the baseline, but omits the essential coupling-induced frequency shift and incorrectly says the coupling currents do not affect the first-order frequency. The suggested 2L factor is also unsupported by the stated solution.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 991,
        "output_tokens": 22729,
        "total_tokens": 23720,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 991,
        "output_tokens": 22729,
        "total_tokens": 23720,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
