{
  "model_key": "gemini_31",
  "display_name": "Gemini 3.1 Pro",
  "provider": "google",
  "evaluation_model_ids": [],
  "thinking_effort": "high",
  "configuration_note": "Gemini 3.1 Pro answered the 50 tasks in three rollouts through OpenRouter's chat completions route (google/gemini-3.1-pro-preview) at reasoning effort high, the highest it offers. Requests set temperature to 0 and max_tokens to 65,536, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Gemini 3.1 Pro on 2026-11-10 ($2.00 input, $0.20 cached input, $12.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 101,
          "incorrect_count": 49,
          "partial_credit_count": 34,
          "zero_count": 15,
          "mean_score_0_to_4": 3.1066666666666665,
          "score_percent": 77.66666666666666,
          "score_distribution": {
            "0": 15,
            "1": 15,
            "2": 10,
            "3": 9,
            "4": 101
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 101,
          "incorrect_count": 49,
          "partial_credit_count": 34,
          "zero_count": 15,
          "mean_score_0_to_4": 3.1066666666666665,
          "score_percent": 77.66666666666666,
          "score_distribution": {
            "0": 15,
            "1": 15,
            "2": 10,
            "3": 9,
            "4": 101
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 77,
          "incorrect_count": 13,
          "partial_credit_count": 4,
          "zero_count": 9,
          "mean_score_0_to_4": 3.533333333333333,
          "score_percent": 88.33333333333333,
          "score_distribution": {
            "0": 9,
            "1": 1,
            "3": 3,
            "4": 77
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 77,
          "incorrect_count": 13,
          "partial_credit_count": 4,
          "zero_count": 9,
          "mean_score_0_to_4": 3.533333333333333,
          "score_percent": 88.33333333333333,
          "score_distribution": {
            "0": 9,
            "1": 1,
            "3": 3,
            "4": 77
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 24,
          "incorrect_count": 36,
          "partial_credit_count": 30,
          "zero_count": 6,
          "mean_score_0_to_4": 2.466666666666667,
          "score_percent": 61.66666666666667,
          "score_distribution": {
            "0": 6,
            "1": 14,
            "2": 10,
            "3": 6,
            "4": 24
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 24,
          "incorrect_count": 36,
          "partial_credit_count": 30,
          "zero_count": 6,
          "mean_score_0_to_4": 2.466666666666667,
          "score_percent": 61.66666666666667,
          "score_distribution": {
            "0": 6,
            "1": 14,
            "2": 10,
            "3": 6,
            "4": 24
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 33,
        "incorrect_count": 17,
        "partial_credit_count": 12,
        "zero_count": 5,
        "mean_score_0_to_4": 3.06,
        "score_percent": 76.5,
        "score_distribution": {
          "0": 5,
          "1": 6,
          "2": 3,
          "3": 3,
          "4": 33
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 34,
        "incorrect_count": 16,
        "partial_credit_count": 11,
        "zero_count": 5,
        "mean_score_0_to_4": 3.14,
        "score_percent": 78.5,
        "score_distribution": {
          "0": 5,
          "1": 4,
          "2": 4,
          "3": 3,
          "4": 34
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 34,
        "incorrect_count": 16,
        "partial_credit_count": 11,
        "zero_count": 5,
        "mean_score_0_to_4": 3.12,
        "score_percent": 78.0,
        "score_distribution": {
          "0": 5,
          "1": 5,
          "2": 3,
          "3": 3,
          "4": 34
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 0,
        "input_tokens": 298016,
        "output_tokens": 1903023,
        "total_tokens": 2201039
      },
      "known_totals": {
        "cached_input_tokens": 0,
        "input_tokens": 298016,
        "output_tokens": 1903023,
        "total_tokens": 2201039
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 25,
          "incorrect_count": 5,
          "partial_credit_count": 2,
          "zero_count": 3,
          "mean_score_0_to_4": 3.466666666666667,
          "score_percent": 86.66666666666667,
          "score_distribution": {
            "0": 3,
            "1": 1,
            "3": 1,
            "4": 25
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 26,
          "incorrect_count": 4,
          "partial_credit_count": 1,
          "zero_count": 3,
          "mean_score_0_to_4": 3.566666666666667,
          "score_percent": 89.16666666666667,
          "score_distribution": {
            "0": 3,
            "3": 1,
            "4": 26
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 26,
          "incorrect_count": 4,
          "partial_credit_count": 1,
          "zero_count": 3,
          "mean_score_0_to_4": 3.566666666666667,
          "score_percent": 89.16666666666667,
          "score_distribution": {
            "0": 3,
            "3": 1,
            "4": 26
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 10,
          "zero_count": 2,
          "mean_score_0_to_4": 2.45,
          "score_percent": 61.25000000000001,
          "score_distribution": {
            "0": 2,
            "1": 5,
            "2": 3,
            "3": 2,
            "4": 8
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 10,
          "zero_count": 2,
          "mean_score_0_to_4": 2.5,
          "score_percent": 62.5,
          "score_distribution": {
            "0": 2,
            "1": 4,
            "2": 4,
            "3": 2,
            "4": 8
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 10,
          "zero_count": 2,
          "mean_score_0_to_4": 2.45,
          "score_percent": 61.25000000000001,
          "score_distribution": {
            "0": 2,
            "1": 5,
            "2": 3,
            "3": 2,
            "4": 8
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, its **intrinsic gain will double**. \n\nHere is the step-by-step breakdown of why this happens, assuming the transistor is biased with a constant drain current ($I_D$), which is standard in analog design.\n\n### 1. The Aspect Ratio ($W/L$) Remains Constant\nBecause you are doubling both $W$ and $L$, the aspect ratio of the transistor does not change:\n$$ \\frac{2W}{2L} = \\frac{W}{L} $$\n\n### 2. Transconductance ($g_m$) Remains Constant\nThe transconductance of a MOSFET (in the saturation region) is given by the equation:\n$$ g_m = \\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) I_D} $$\nSince the bias current ($I_D$) is constant and the aspect ratio ($W/L$) remains unchanged, **$g_m$ stays exactly the same.** \n*(Note: Because $I_D$ and $W/L$ are constant, the overdrive voltage, $V_{OV}$, also remains constant).*\n\n### 3. Output Resistance ($r_o$) Doubles\nThe output resistance of a MOSFET is determined by channel-length modulation ($\\lambda$) and is given by:\n$$ r_o = \\frac{1}{\\lambda I_D} $$\nBecause the channel-length modulation parameter ($\\lambda$) is inversely proportional to the length of the channel ($\\lambda \\propto 1/L$), we can rewrite output resistance as being directly proportional to length:\n$$ r_o \\propto \\frac{L}{I_D} $$\nSince $I_D$ is constant and $L$ is doubled ($2L$), **the output resistance $r_o$ doubles.**\n\n### 4. Intrinsic Gain ($A_v$) Doubles\nThe intrinsic gain is the maximum possible voltage gain of a single transistor, defined as the product of transconductance and output resistance:\n$$ A_v = g_m \\times r_o $$\nSince $g_m$ is multiplied by 1, and $r_o$ is multiplied by 2:\n$$ A_{v(new)} = (1 \\times g_m) \\times (2 \\times r_o) = 2(g_m r_o) $$\n\n### Summary Formula\nYou can also see this by combining the equations for $g_m$ and $r_o$ into a single proportionality for intrinsic gain:\n$$ A_v \\propto \\sqrt{\\frac{W \\cdot L}{I_D}} $$\nIf you replace $W$ with $2W$ and $L$ with $2L$:\n$$ A_{v(new)} \\propto \\sqrt{\\frac{(2W)(2L)}{I_D}} = \\sqrt{\\frac{4WL}{I_D}} = 2 \\sqrt{\\frac{WL}{I_D}} $$\n\n**Design Takeaway:** In analog IC design, if you need more gain from a transistor without changing its DC operating point (current and overdrive voltage) or its speed/bandwidth characteristics too drastically, scaling up both $W$ and $L$ proportionally is the standard technique. (However, keep in mind that doing this will increase the parasitic capacitance of the gate, which will lower the transit frequency, $f_T$).",
        "format": "markdown",
        "sha256": "a74ff0c076abe9614e28433915d2a8a4bdd37ef45e9e3b4a9bf7502eed1815e9"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with W/L and drain current unchanged, gm stays approximately constant while doubling L increases ro. The added design comments do not affect the central answer.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 4879,
        "total_tokens": 4915,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3442,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 2550,
        "total_tokens": 2568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1815,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, its **intrinsic gain will double**. \n\nHere is the step-by-step breakdown of why this happens, assuming the transistor is biased at a constant drain current ($I_D$), which is the standard assumption in analog circuit design.\n\n### 1. The Aspect Ratio ($W/L$) Remains Constant\nIf you double $W$ and double $L$, the new aspect ratio is:\n$$ \\frac{2W}{2L} = \\frac{W}{L} $$\nBecause the aspect ratio does not change, the DC biasing characteristics (like the overdrive voltage, $V_{OV}$) remain exactly the same for a given drain current ($I_D$).\n\n### 2. Transconductance ($g_m$) Remains Constant\nThe transconductance of a MOSFET can be expressed as:\n$$ g_m = \\sqrt{2 \\mu C_{ox} \\left(\\frac{W}{L}\\right) I_D} $$\nSince neither the aspect ratio ($W/L$) nor the drain current ($I_D$) has changed, **$g_m$ remains constant**.\n\n### 3. Output Resistance ($r_o$) Doubles\nThe output resistance of a MOSFET is determined by channel length modulation ($\\lambda$) and is expressed as:\n$$ r_o = \\frac{1}{\\lambda I_D} $$\nThe channel length modulation parameter ($\\lambda$) is inversely proportional to the channel length ($L$). Therefore, $r_o$ is directly proportional to $L$:\n$$ r_o \\propto \\frac{L}{I_D} $$\nBecause you doubled the length ($L \\rightarrow 2L$) while keeping $I_D$ constant, **$r_o$ doubles**.\n\n### 4. Intrinsic Gain ($A_v$) Doubles\nThe intrinsic gain of a MOSFET is the maximum theoretical voltage gain a single transistor can provide, calculated as:\n$$ A_v = g_m \\times r_o $$\nSince $g_m$ stays the same ($1\\times$) and $r_o$ doubles ($2\\times$), the intrinsic gain becomes:\n$$ A_{v,new} = (1 \\times g_m) \\times (2 \\times r_o) = 2(g_m r_o) $$\n**The intrinsic gain is doubled.**\n\n***\n\n### The Engineering Trade-off (Why we don't just make everything huge)\nWhile doubling $W$ and $L$ gives you twice the gain, it comes at a severe cost to speed. \nBy doubling both dimensions, the **gate area ($W \\times L$) quadruples**. This means the gate capacitance ($C_{gs}$) becomes four times larger. As a result, the transit frequency ($f_T$) and the bandwidth of your circuit will drop significantly. In analog design, increasing $L$ to get more gain is a classic trade-off that sacrifices speed and consumes more silicon area.",
        "format": "markdown",
        "sha256": "0a63d5fcb005c9f51336a7b94ecc750a917a42251eb71a11c1e1824b1828200b"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes intrinsic gain approximately doubles: with W/L and drain current unchanged, gm stays roughly constant while the longer channel increases ro. The added speed/area tradeoff is secondary and does not undermine the answer.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 4144,
        "total_tokens": 4180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2907,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 2173,
        "total_tokens": 2191,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1532,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET operating in the saturation region (assuming a constant bias drain current, $I_D$), **its intrinsic gain will double.**\n\nHere is the step-by-step breakdown of why this happens:\n\n### 1. The Formula for Intrinsic Gain\nThe intrinsic gain ($A_v$) of a MOSFET is the maximum possible voltage gain it can provide, defined as:\n**$A_v = g_m \\times r_o$**\n*   **$g_m$** = transconductance\n*   **$r_o$** = output resistance\n\n### 2. The Effect on Transconductance ($g_m$)\nTransconductance is heavily dependent on the aspect ratio of the transistor, which is $W/L$. \nThe formula for $g_m$ (assuming constant drain current $I_D$) is:\n$g_m = \\sqrt{2 \\mu C_{ox} \\frac{W}{L} I_D}$\n\nIf you double both $W$ and $L$, the new ratio becomes $(2W) / (2L)$, which simplifies back to **$W/L$**. \nBecause the ratio remains exactly the same, **$g_m$ remains unchanged.**\n\n### 3. The Effect on Output Resistance ($r_o$)\nOutput resistance is determined by channel-length modulation ($\\lambda$). The formula for $r_o$ is:\n$r_o = \\frac{1}{\\lambda I_D}$\n\nThe channel-length modulation parameter ($\\lambda$) is inversely proportional to the length of the channel ($L$). Therefore, output resistance is *directly* proportional to the length of the transistor ($r_o \\propto L$). \n\nBecause you doubled the length ($L$), **the output resistance ($r_o$) doubles.**\n\n### Conclusion\nIf we plug these changes back into the intrinsic gain formula:\n*   $g_{m(new)} = g_m$\n*   $r_{o(new)} = 2 \\times r_o$\n\n$A_{v(new)} = g_m \\times (2 \\times r_o) = \\mathbf{2 \\times A_v}$\n\n**Summary:** By doubling both $W$ and $L$, you keep the current-driving capability ($g_m$) exactly the same, but you significantly reduce channel-length modulation by making the channel longer. This doubles the output resistance, thereby **doubling the intrinsic gain.** \n\n*(Note: This relies on first-order square-law models. In deep sub-micron/short-channel technologies, the gain will increase, but it may not perfectly double due to secondary effects like Drain-Induced Barrier Lowering (DIBL).)*",
        "format": "markdown",
        "sha256": "b573512835cd63e0d90cd9ea52357d83971db6769cae7858db5610caf2a50261"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with W/L and the assumed drain current unchanged, gm stays approximately constant, while longer L reduces channel-length modulation and doubles ro. The stated bias assumption is compatible with the first-order result.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 4348,
        "total_tokens": 4384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3099,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 1971,
        "total_tokens": 1989,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1375,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is that **they can both be correct**, depending entirely on what parameters are being held constant. This is a classic \"trick question\" in analog circuit design. \n\nTo understand why, we have to look at the different mathematical expressions for the transconductance ($g_m$) of a MOSFET operating in the saturation region. \n\nHere is why both students have a valid point:\n\n### Why Student A is correct (The \"Lab Bench\" Perspective)\nStudent A is correct if we assume a **fixed transistor size** (Width/Length is constant). \n\nIf you have a specific MOSFET soldered to a circuit board and you turn up the gate voltage, the overdrive voltage ($V_{OV} = V_{GS} - V_{TH}$) increases. \n\nThe equation for $g_m$ in this scenario is:\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$$\n\nBecause mobility ($\\mu_n$), oxide capacitance ($C_{ox}$), and the physical dimensions ($W/L$) are fixed, **$g_m$ is directly proportional to $V_{OV}$**. Therefore, as overdrive voltage goes up, transconductance goes up. \n\n### Why Student B is correct (The \"IC Designer\" Perspective)\nStudent B is correct if we assume a **fixed drain current** ($I_D$ is constant). \n\nIn Integrated Circuit (IC) design, engineers are usually given a strict power budget, meaning the bias current ($I_D$) is fixed. To change the overdrive voltage of a transistor while keeping the current the same, the designer must change the physical size ($W/L$) of the transistor. \n\nThe equation for $g_m$ in this scenario is:\n$$g_m = \\frac{2 I_D}{V_{OV}}$$\n\nBecause $I_D$ is fixed, **$g_m$ is inversely proportional to $V_{OV}$**. Therefore, if a designer wants to increase the overdrive voltage (by making the transistor narrower/longer), the transconductance will actually go down. \n\n### Summary\n*   **Student A** is thinking like someone testing a single transistor: *\"If I increase the gate voltage, $g_m$ goes up.\"*\n*   **Student B** is thinking like an IC designer: *\"If I have a fixed amount of current, designing for a higher overdrive voltage will cost me $g_m$.\"*\n\n*(Note: In modern, very small \"short-channel\" transistors, velocity saturation occurs. In this state, $g_m$ actually becomes largely independent of $V_{OV}$ and flattens out, meaning in cutting-edge chips, neither student is entirely correct!)*",
        "format": "markdown",
        "sha256": "86832cb7d8ea44598f850ed7b323f030e0d5dee2753132968f36bcdf48429b8b"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed transistor size, explaining that gm rises with VOV, and notes Student B's inverse trend applies only at fixed ID. The short-channel aside is secondary.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 58,
        "output_tokens": 4144,
        "total_tokens": 4202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2845,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1830,
        "total_tokens": 1859,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is that **they can both be correct**, depending entirely on what is being held constant. This is a classic \"trick\" question in analog IC design. \n\nTo understand why, we have to look at the different ways to write the equation for the transconductance ($g_m$) of a MOSFET operating in the saturation region.\n\nHere is why both students have a valid point:\n\n### Why Student A is correct (Constant Device Size)\nStudent A is likely thinking about a **fixed, already-manufactured transistor**. \n\nIf you have a specific MOSFET, its physical dimensions (Width $W$ and Length $L$) are fixed. The equation for transconductance in this scenario is:\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$$\n\nIn this equation, $\\mu_n$, $C_{ox}$, $W$, and $L$ are all constants. Therefore, $g_m$ is directly proportional to the overdrive voltage ($V_{OV}$). If you increase the gate voltage (thereby increasing $V_{OV}$), the drain current increases, and **the transconductance goes up.** \n\n### Why Student B is correct (Constant Drain Current)\nStudent B is likely thinking like an **integrated circuit (IC) designer**. \n\nIn IC design, you are usually constrained by a strict power budget, meaning your drain current ($I_D$) is fixed by a current source. The equation for transconductance expressed in terms of drain current is:\n$$g_m = \\frac{2 I_D}{V_{OV}}$$\n\nIf the current ($I_D$) is held constant, $g_m$ is *inversely* proportional to $V_{OV}$. How is this physically possible? To increase $V_{OV}$ while keeping the current exactly the same, the designer must use a transistor with a smaller Width ($W$). Because the transistor is now smaller, **the transconductance goes down.**\n\n### Summary\n*   **Student A is correct** if you are testing a specific transistor on a bench. (Constant $W/L$, varying $I_D$).\n*   **Student B is correct** if you are designing a circuit with a fixed power/current budget. (Constant $I_D$, varying $W/L$).\n\n*(Note: In modern, very small \"short-channel\" MOSFETs, a phenomenon called velocity saturation occurs. In this state, $g_m$ actually flattens out and becomes roughly constant, regardless of how much you increase $V_{OV}$!)*",
        "format": "markdown",
        "sha256": "15f48aff7ea98639bf54a942e70f2d57502ca4f6859387dbee664a8817db1163"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed W/L, where gm increases with VOV, and explains that Student B's inverse relationship applies only when ID is fixed and W/L is adjusted. The short-channel note is secondary.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 58,
        "output_tokens": 3943,
        "total_tokens": 4001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 2022,
        "total_tokens": 2051,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1474,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is that **they can both be correct**, depending entirely on what is being held constant. This is a classic \"trick\" question in analog IC design. \n\nTo understand why, we have to look at the different ways to write the equation for the transconductance ($g_m$) of a MOSFET operating in the saturation region.\n\nHere is why both students have a valid point:\n\n### Why Student A is correct (Constant Device Size)\nStudent A is likely thinking about a **fixed, already-manufactured transistor**. \n\nIf you have a specific MOSFET, its physical dimensions (Width $W$ and Length $L$) are fixed. The equation for transconductance in this scenario is:\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$$\n\nIn this equation, $\\mu_n$, $C_{ox}$, $W$, and $L$ are all constants. Therefore, $g_m$ is directly proportional to the overdrive voltage ($V_{OV}$). If you increase the gate voltage (thereby increasing $V_{OV}$), the drain current increases, and **the transconductance goes up.** \n\n### Why Student B is correct (Constant Drain Current)\nStudent B is likely thinking like an **integrated circuit (IC) designer**. \n\nIn IC design, you are usually constrained by a strict power budget, meaning your drain current ($I_D$) is fixed by a current source. The equation for transconductance expressed in terms of drain current is:\n$$g_m = \\frac{2 I_D}{V_{OV}}$$\n\nIf the current ($I_D$) is held constant, $g_m$ is *inversely* proportional to $V_{OV}$. How is this physically possible? To increase $V_{OV}$ while keeping the current exactly the same, the designer must use a transistor with a smaller Width ($W$). Because the transistor is now smaller, **the transconductance goes down.**\n\n### Summary\n*   **Student A is correct** if you are testing a specific transistor on a bench. (Constant $W/L$, varying $I_D$).\n*   **Student B is correct** if you are designing a circuit with a fixed power/current budget. (Constant $I_D$, varying $W/L$).\n\n*(Note: In modern, very small \"short-channel\" MOSFETs, a phenomenon called velocity saturation occurs. In this state, $g_m$ actually flattens out and becomes roughly constant, regardless of how much you increase $V_{OV}$!)*",
        "format": "markdown",
        "sha256": "15f48aff7ea98639bf54a942e70f2d57502ca4f6859387dbee664a8817db1163"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed W/L, where gm increases with VOV, and explains that Student B's inverse relationship applies only when ID is fixed and W/L is adjusted. The short-channel note is secondary.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 58,
        "output_tokens": 3891,
        "total_tokens": 3949,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 2022,
        "total_tokens": 2051,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1474,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, the small-signal model of a PMOS device is **topologically and mathematically identical** to that of an NMOS device, provided you use the exact same voltage and current conventions for both.\n\nThis is one of the most convenient features of analog circuit design: once you learn the small-signal model for an NMOS transistor, you can apply the exact same equivalent circuit to a PMOS transistor.\n\nHere is a detailed breakdown of why this is true, how it works, and the important differences you still need to keep in mind.\n\n---\n\n### 1. Why are they identical? (The Math)\nSmall-signal models do not care about absolute DC voltages or DC current directions; they only care about **changes** (derivatives) around a specific operating point. \n\nIn a PMOS device, the DC current flows from Source to Drain, and the device is turned on by a negative Gate-to-Source voltage ($V_{GS}$). However, when we take the derivative of the large-signal equations to find the small-signal parameters, the negative signs cancel out.\n\nIf we define the small-signal variables for **both** NMOS and PMOS as:\n*   $v_{gs}$ = small-signal gate-to-source voltage\n*   $v_{ds}$ = small-signal drain-to-source voltage\n*   $i_d$ = small-signal current flowing **into the Drain and out of the Source**\n\nThen the fundamental small-signal equation for both devices is exactly the same:\n$$i_d = g_m v_{gs} + g_{mb} v_{bs} + \\frac{v_{ds}}{r_o}$$\n\nBecause the equation is the same, the equivalent circuit drawn to represent this equation (a voltage-controlled current source $g_m v_{gs}$ in parallel with an output resistance $r_o$) is also exactly the same.\n\n### 2. How to apply the model to a PMOS\nIn circuit schematics, PMOS transistors are usually drawn \"upside down\" compared to NMOS transistors, with the Source at the top (connected to $V_{DD}$) and the Drain at the bottom. \n\nWhen replacing a PMOS with its small-signal model:\n1.  Identify the Gate, Drain, and Source nodes on your schematic.\n2.  Erase the PMOS symbol.\n3.  Drop in the standard NMOS small-signal model.\n4.  Connect the model's Gate, Drain, and Source terminals to the exact same nodes you identified in step 1. \n\nEven though the PMOS Source is physically at the top of your drawing, the standard model will still yield the correct mathematical results.\n\n### 3. The \"Gotchas\": What is NOT identical?\nWhile the *structure* of the small-signal model is identical, the **values of the parameters** ($g_m$, $r_o$, capacitances) and the **DC biasing** are different. \n\nWhen calculating the parameters to plug into the model, you must remember:\n\n*   **Mobility ($\\mu$):** The hole mobility ($\\mu_p$) in a PMOS is typically 2 to 3 times lower than the electron mobility ($\\mu_n$) in an NMOS. Therefore, to get the same transconductance ($g_m$) as an NMOS, a PMOS usually needs to be made 2 to 3 times wider.\n*   **DC Biasing:** The small-signal parameters ($g_m$, $r_o$) depend on the DC bias point. For PMOS, you must use the absolute values or the correct PMOS large-signal equations to find the DC current ($I_D$) and overdrive voltage ($|V_{GS}| - |V_{THp}|$) before calculating $g_m$ and $r_o$.\n*   **Body Connection:** In an NMOS, the body is usually tied to the lowest voltage (Ground). In a PMOS, the body is usually tied to the highest voltage ($V_{DD}$). In small-signal AC analysis, both Ground and $V_{DD}$ are considered **AC ground**. Therefore, the body terminal of the small-signal model will go to AC ground in both cases, but for different physical reasons.\n\n### Summary\nIf you define $v_{gs}$ and $i_d$ (Drain-to-Source current) the same way for both, **the small-signal circuit is exactly the same**. You do not need to memorize a separate small-signal circuit for PMOS devices.",
        "format": "markdown",
        "sha256": "db15e9281dfb1c3d3c98c1cf23b2911b1df688cea4deb646a7f39099bfb969da"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer gives the required conclusion that the PMOS small-signal model is the same in form as the NMOS model. The golden solution explicitly awards full credit for that conclusion; the additional polarity details are not required.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 4161,
        "total_tokens": 4201,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2357,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 2177,
        "total_tokens": 2197,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1208,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, the small-signal equivalent circuit model of a PMOS device is **exactly identical** to that of an NMOS device. \n\nIf you draw the small-signal circuit for an amplifier using an NMOS transistor and then replace it with a PMOS transistor, the topology of the small-signal circuit does not change at all.\n\nHere is a breakdown of why this is the case, and the important distinctions you still need to keep in mind.\n\n### Why are they identical?\nSmall-signal models are based on **linearization** (taking the derivative) of the transistor's non-linear DC equations around a specific operating point. \n\nWhile the DC currents and voltages in a PMOS flow in the opposite direction compared to an NMOS, the small-signal model only looks at **changes** ($\\Delta$) in these values. \n* In an NMOS, an *increase* in gate voltage ($+v_{gs}$) causes an *increase* in drain current flowing from Drain to Source.\n* In a PMOS, an *increase* in gate voltage ($+v_{gs}$) causes a *decrease* in the DC current flowing from Source to Drain. Mathematically, a decrease in Source-to-Drain current is the exact same thing as an increase in Drain-to-Source current. \n\nBecause the negative signs cancel out during the derivation, the resulting AC equivalent circuit is identical. Both models feature:\n1. A voltage-controlled current source ($g_m v_{gs}$) pointing from Drain to Source.\n2. An output resistance ($r_o$) connected between Drain and Source.\n3. A body-effect current source ($g_{mb} v_{bs}$) pointing from Drain to Source.\n4. The exact same arrangement of parasitic capacitances ($C_{gs}, C_{gd}, C_{db}, C_{sb}$) for high-frequency analysis.\n\n### The Catch: The *Topology* is identical, but the *Parameters* are different\nWhile you draw the exact same circuit diagram for both, the **values** of the components inside that model ($g_m$, $r_o$, etc.) will differ because of the physical differences between N-type and P-type materials.\n\n**1. Transconductance ($g_m$)**\nThe transconductance depends on the mobility of the charge carriers. Because electrons (NMOS) move faster than holes (PMOS)—typically by a factor of 2 to 3—an NMOS will have a significantly higher $g_m$ than a PMOS of the exact same physical size and bias current. \n* NMOS: $g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{THN})$\n* PMOS: $g_m = \\mu_p C_{ox} \\frac{W}{L} (V_{SG} - |V_{THP}|)$\n\n**2. Output Resistance ($r_o$)**\nThe output resistance is determined by channel-length modulation ($\\lambda$). The value of $\\lambda$ is usually different for PMOS and NMOS devices in a given semiconductor manufacturing process, meaning their $r_o$ values will differ even if biased at the same current.\n\n**3. DC Biasing**\nTo actually *use* the small-signal model, the transistor must be biased in the saturation region. The DC circuits required to get the transistors into saturation are completely inverted. NMOS requires positive $V_{GS}$ and $V_{DS}$, while PMOS requires negative $V_{GS}$ and $V_{DS}$ (or positive $V_{SG}$ and $V_{SD}$). \n\n### Summary\nWhen you transition from DC analysis to AC (small-signal) analysis, you can treat PMOS and NMOS transistors as the **exact same circuit component**. You just have to calculate their specific $g_m$ and $r_o$ values based on their respective DC operating points and carrier mobilities.",
        "format": "markdown",
        "sha256": "a33dac5acbeb9dd0d0fe9fc026c40909f91d6de81a48de0710aeb8d312afd252"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model. The golden solution explicitly awards full credit for this conclusion; polarity conventions and parameter values may differ.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 4167,
        "total_tokens": 4207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 2025,
        "total_tokens": 2045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1183,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the topological structure and the mathematical equations of the small-signal model for a PMOS device are exactly identical to those of an NMOS device.** \n\nWhen you draw the AC equivalent circuit for an amplifier, you use the exact same small-signal circuit diagram for both NMOS and PMOS transistors. \n\nHowever, while the *model itself* is identical, the **values of the parameters** within the model (like transconductance $g_m$, output resistance $r_o$, and capacitances) will differ due to the underlying physics of the devices.\n\nHere is a detailed breakdown of why they are identical and where the practical differences lie.\n\n---\n\n### 1. Why the Models are Identical (The Math)\nIt often confuses people that the models are identical because the DC currents and voltages in a PMOS are reversed compared to an NMOS. \n* In an NMOS, DC current flows from Drain to Source. \n* In a PMOS, DC current flows from Source to Drain.\n\nHowever, small-signal models deal with **changes** ($\\Delta$) around a DC operating point, not absolute values. \n* If you increase the gate voltage ($+v_{gs}$) of an **NMOS**, the drain current *increases*. Therefore, the small-signal current source is $g_m v_{gs}$ pointing from Drain to Source.\n* If you increase the gate voltage ($+v_{gs}$) of a **PMOS**, the source-to-drain current *decreases*. A decrease in Source-to-Drain current is mathematically equivalent to an increase in Drain-to-Source current. \n\nBecause of this \"double negative,\" the small-signal dependent current source for a PMOS is also written as **$g_m v_{gs}$ pointing from Drain to Source**. Therefore, the circuit diagrams match perfectly.\n\n### 2. The Shared Small-Signal Components\nFor both NMOS and PMOS, the low-frequency small-signal model consists of:\n* **$g_m v_{gs}$**: A voltage-controlled current source between Drain and Source.\n* **$r_o$**: The output resistance connected between Drain and Source (representing channel-length modulation).\n* **$g_{mb} v_{bs}$**: A second voltage-controlled current source representing the body effect (if the source and body are not tied together).\n\nFor high-frequency analysis, the exact same parasitic capacitances ($C_{gs}$, $C_{gd}$, $C_{db}$, $C_{sb}$) are added to the same nodes for both devices.\n\n---\n\n### 3. The Differences (Parameter Values)\nWhile you draw the same picture for both, the numbers you plug into the model will be different. \n\n**A. Mobility ($\\mu$) and Transconductance ($g_m$)**\nThe charge carriers in an NMOS are electrons, while in a PMOS they are holes. Because electrons have a higher mobility than holes ($\\mu_n \\approx 2 \\text{ to } 3 \\times \\mu_p$), an NMOS will naturally have a higher transconductance ($g_m$) than a PMOS of the exact same physical size and bias current.\n\n**B. Device Sizing and Capacitance**\nBecause PMOS devices have lower hole mobility, IC designers usually make PMOS transistors 2 to 3 times *wider* than NMOS transistors to achieve matching current drive and $g_m$. Because the PMOS is physically larger, its parasitic capacitances ($C_{gs}$, $C_{gd}$, etc.) will be significantly larger than those of a matched NMOS.\n\n**C. The Body Connection**\nIn standard CMOS processes, all NMOS devices share a common P-substrate (tied to the lowest voltage, usually Ground). PMOS devices sit in their own N-wells (tied to the highest voltage, usually $V_{DD}$). Because $V_{DD}$ and Ground are both considered \"AC Ground\" in small-signal analysis, this doesn't change the model, but it does dictate how the body-effect parameter ($g_{mb}$) is calculated based on the circuit topology.\n\n### Summary\nIf you are doing hand calculations or drawing an AC equivalent circuit, **treat the PMOS exactly like an NMOS**. Just remember that to get the device into saturation in the first place, the DC biasing was inverted, and the physical parameters ($g_m$, $r_o$, $C_{gs}$) must be calculated using PMOS-specific constants ($\\mu_p$, $V_{th,p}$).",
        "format": "markdown",
        "sha256": "e49af3877ec38f3a2a021d60156442a544fd9f4801d5fe2fbba26f7345343b3a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly answers that the PMOS small-signal model is the same in form as the NMOS model, satisfying the explicit full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 4560,
        "total_tokens": 4600,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2734,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 2304,
        "total_tokens": 2324,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1343,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is the step-by-step analysis to sketch the relationship between $I_X$ and $V_X$:\n\n### 1. Circuit Analysis\n*   **Transistor Configuration:** The NMOS transistor $M_1$ has its gate connected directly to its drain. This is known as a **diode-connected** configuration.\n*   **Terminal Voltages:**\n    *   The source is connected to ground, so $V_S = 0\\text{ V}$.\n    *   The voltage source $V_X$ is applied to the drain, so $V_D = V_X$.\n    *   Because the gate is tied to the drain, $V_G = V_D = V_X$.\n*   **Voltage Differences:**\n    *   Gate-to-source voltage: $V_{GS} = V_G - V_S = V_X - 0 = V_X$\n    *   Drain-to-source voltage: $V_{DS} = V_D - V_S = V_X - 0 = V_X$\n*   **Current:** The current $I_X$ flows from the source $V_X$ into the drain of $M_1$, so it is equal to the drain current: $I_X = I_D$.\n\n### 2. Regions of Operation\nTo sketch the curve, we need to determine how the transistor behaves for different values of $V_X$. Let $V_{TH}$ be the threshold voltage of the NMOS transistor (typically $V_{TH} > 0$).\n\n*   **Cutoff Region ($V_X < V_{TH}$):**\n    When the gate-to-source voltage is less than the threshold voltage ($V_{GS} < V_{TH}$), the transistor is turned off.\n    *   Condition: $V_X < V_{TH}$\n    *   Current: **$I_X = 0$**\n\n*   **Saturation Region ($V_X \\ge V_{TH}$):**\n    When $V_{GS} \\ge V_{TH}$, the transistor turns on. We must check if it operates in the linear (triode) or saturation region. The condition for saturation is:\n    $$V_{DS} \\ge V_{GS} - V_{TH}$$\n    Substituting our circuit's values:\n    $$V_X \\ge V_X - V_{TH}$$\n    $$0 \\ge -V_{TH}$$\n    $$V_{TH} \\ge 0$$\n    Since the threshold voltage $V_{TH}$ is positive for an enhancement-mode NMOS, this condition is always satisfied. Therefore, a diode-connected transistor is **always in saturation** when it is conducting.\n    The equation for drain current in saturation is:\n    $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2$$\n    Substituting our variables:\n    **$$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$**\n\n### 3. Sketch Description\nThe plot of $I_X$ versus $V_X$ will have the following characteristics:\n1.  **For $V_X < V_{TH}$:** The curve is a flat horizontal line along the $V_X$-axis ($I_X = 0$).\n2.  **At $V_X = V_{TH}$:** The current begins to rise. The slope of the curve at this exact point is zero, meaning it transitions smoothly from the flat line.\n3.  **For $V_X > V_{TH}$:** The current increases quadratically. The curve is a parabola opening upwards.\n\n**Visual Representation:**\nImagine a graph with $V_X$ on the horizontal axis and $I_X$ on the vertical axis.\n*   Draw a line on the horizontal axis from the origin ($0,0$) up to the point $V_{TH}$.\n*   From $V_{TH}$ onwards, draw a curve that sweeps upwards in a parabolic shape (like the right half of a $y = x^2$ graph, shifted to start at $V_{TH}$).",
        "format": "markdown",
        "sha256": "334058cab511a8cddb1a35029e5bf6436bc2724a8dcfa98df47eefbaec0cb932"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its saturation operation when on, and the zero-below-threshold, quadratic-above-threshold current characteristic.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2230,
        "output_tokens": 10103,
        "total_tokens": 12333,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 4388,
        "total_tokens": 5503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is the step-by-step analysis to sketch the relationship between $I_X$ and $V_X$:\n\n**1. Circuit Analysis**\n*   The circuit consists of an NMOS transistor ($M_1$) with its gate connected to its drain. This is known as a **diode-connected** configuration.\n*   The voltage source $V_X$ is applied to the drain/gate node, and the source is grounded.\n*   Therefore, the gate-to-source voltage ($V_{GS}$) and the drain-to-source voltage ($V_{DS}$) are both equal to $V_X$:\n    $$V_{GS} = V_{DS} = V_X$$\n*   The current $I_X$ flowing from the voltage source is the drain current ($I_D$) of the transistor:\n    $$I_X = I_D$$\n\n**2. Regions of Operation**\nThe behavior of the transistor depends on the value of $V_X$ relative to its threshold voltage ($V_{TH}$):\n\n*   **Cutoff Region ($V_X < V_{TH}$):**\n    When the applied voltage $V_X$ is less than the threshold voltage, the transistor is turned off. No channel is formed, and no current flows.\n    $$I_X = 0 \\quad \\text{for} \\quad V_X < V_{TH}$$\n\n*   **Saturation Region ($V_X \\ge V_{TH}$):**\n    When $V_X$ reaches or exceeds $V_{TH}$, the transistor turns on. To determine if it's in the linear (triode) or saturation region, we check the saturation condition:\n    $$V_{DS} \\ge V_{GS} - V_{TH}$$\n    Substituting our circuit's values ($V_{DS} = V_X$ and $V_{GS} = V_X$):\n    $$V_X \\ge V_X - V_{TH}$$\n    $$0 \\ge -V_{TH} \\implies V_{TH} \\ge 0$$\n    Since the threshold voltage $V_{TH}$ for an enhancement-mode NMOS is positive, this condition is always satisfied. Thus, a diode-connected transistor is **always in saturation** when it is on.\n    The current in the saturation region is given by the square-law equation:\n    $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n    This indicates a **quadratic (parabolic)** relationship between $I_X$ and $V_X$.\n\n**3. Sketch Description**\nIf you were to draw this on a graph with $V_X$ on the horizontal axis and $I_X$ on the vertical axis:\n*   Start at the origin $(0,0)$.\n*   Draw a flat, horizontal line along the $V_X$ axis ($I_X = 0$) from $V_X = 0$ up to $V_X = V_{TH}$.\n*   At the point $V_X = V_{TH}$, the curve begins to rise.\n*   For $V_X > V_{TH}$, draw a curve that sweeps upwards in the shape of a parabola, representing the quadratic increase in current as voltage increases.",
        "format": "markdown",
        "sha256": "7b1e4cd3217480f07ad3afbaa9f2b0b42a369b5896f9d121868d08d6dd08913a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold, and a quadratic rise above threshold. Its saturation reasoning is correct; omitted secondary effects are not required.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2230,
        "output_tokens": 9026,
        "total_tokens": 11256,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 4046,
        "total_tokens": 5161,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3310,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is the step-by-step analysis to sketch the relationship between $I_X$ and $V_X$:\n\n### 1. Analyze the Circuit Configuration\n*   **Transistor Type:** The symbol represents an NMOS transistor, $M_1$.\n*   **Connections:**\n    *   The source terminal is connected to ground ($0\\text{V}$).\n    *   The gate terminal is shorted to the drain terminal. This is known as a **diode-connected** configuration.\n    *   A voltage source $V_X$ is applied to the drain terminal.\n    *   The current $I_X$ is defined as flowing from the voltage source into the drain of $M_1$. Therefore, $I_X$ is equal to the drain current of the transistor ($I_X = I_D$).\n*   **Voltages:**\n    *   Gate-to-Source Voltage: $V_{GS} = V_G - V_S = V_X - 0 = V_X$\n    *   Drain-to-Source Voltage: $V_{DS} = V_D - V_S = V_X - 0 = V_X$\n\n### 2. Determine Regions of Operation\nThe behavior of the NMOS transistor depends on the value of $V_X$ relative to its threshold voltage, $V_{TH}$ (assuming an enhancement-mode device where $V_{TH} > 0$).\n\n*   **Cutoff Region ($V_X < V_{TH}$):**\n    When the applied voltage $V_X$ is less than the threshold voltage, the gate-source voltage is insufficient to create a conducting channel.\n    *   Condition: $V_{GS} < V_{TH} \\Rightarrow V_X < V_{TH}$\n    *   Current: The transistor is OFF, so $I_D = 0$.\n    *   Result: **$I_X = 0$**\n\n*   **Saturation Region ($V_X \\ge V_{TH}$):**\n    When $V_X$ reaches or exceeds $V_{TH}$, the transistor turns ON. To determine if it operates in the linear (triode) or saturation region, we check the saturation condition:\n    *   Condition for Saturation: $V_{DS} \\ge V_{GS} - V_{TH}$\n    *   Substituting our circuit's values: $V_X \\ge V_X - V_{TH}$\n    *   Simplifying: $0 \\ge -V_{TH} \\Rightarrow V_{TH} \\ge 0$\n    Since $V_{TH}$ is a positive constant, this condition is always true. Therefore, a diode-connected NMOS is **always in saturation** when it is turned ON.\n    *   Current Equation: In saturation, the drain current is given by the square-law model (ignoring channel-length modulation for a basic sketch):\n        $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n    *   Result: $I_X$ increases quadratically with $V_X$.\n\n### 3. Sketching the Curve\nBased on the analysis, the $I_X$ vs. $V_X$ plot will have the following characteristics:\n1.  **Horizontal Axis:** $V_X$\n2.  **Vertical Axis:** $I_X$\n3.  **For $V_X < V_{TH}$:** The curve is a flat horizontal line along the $V_X$ axis at $I_X = 0$.\n4.  **For $V_X \\ge V_{TH}$:** The curve starts at $V_X = V_{TH}$ and rises as a parabola, representing the quadratic relationship $I_X \\propto (V_X - V_{TH})^2$.\n\nHere is a representation of what the sketch should look like:\n\n```text\n      I_X\n       ^\n       |\n       |                           /\n       |                         /\n       |                       /\n       |                     /\n       |                   /  <-- Quadratic curve: I_X = (1/2)μ_nC_ox(W/L)(V_X - V_TH)^2\n       |                 /\n       |               /\n       |             /\n       |           /\n       |         /\n       |       /\n       |_____/\n-------|-----|------------------------> V_X\n       0    V_TH\n```",
        "format": "markdown",
        "sha256": "73d07a13c24f06e10671b96fee9a726181dbb771e005930b4bed6229d03a0bae"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold, and a quadratic rise above threshold; this matches the golden solution’s full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2230,
        "output_tokens": 9725,
        "total_tokens": 11955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7859,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 6115,
        "total_tokens": 7230,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5114,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the relationship between $I_X$ and $V_X$, we need to analyze the operation of the NMOS transistor $M_1$ in different regions based on the input voltage $V_X$.\n\n**1. Identify Terminal Voltages**\nFrom the given circuit diagram, we can determine the voltages at the terminals of the NMOS transistor $M_1$:\n*   **Gate Voltage ($V_G$):** Connected directly to the voltage source $V_X$, so $V_G = V_X$.\n*   **Source Voltage ($V_S$):** Connected to ground, so $V_S = 0\\text{ V}$.\n*   **Drain Voltage ($V_D$):** Connected to a $1\\text{ V}$ DC source, so $V_D = 1\\text{ V}$.\n\nFrom these, we can find the gate-to-source and drain-to-source voltages:\n*   $V_{GS} = V_G - V_S = V_X - 0 = V_X$\n*   $V_{DS} = V_D - V_S = 1\\text{ V} - 0 = 1\\text{ V}$\n\nThe current $I_X$ is the current flowing into the drain, which is the drain current of the transistor: $I_X = I_D$.\n\n**2. Analyze Regions of Operation**\nThe NMOS transistor operates in three main regions depending on $V_{GS}$ (which is $V_X$) and $V_{DS}$ (which is fixed at $1\\text{ V}$). Let $V_{TH}$ be the threshold voltage of the transistor.\n\n*   **Cutoff Region:**\n    The transistor is off when the gate-to-source voltage is less than the threshold voltage.\n    *   **Condition:** $V_{GS} < V_{TH} \\implies V_X < V_{TH}$\n    *   **Current:** $I_X = 0$\n    *   *Sketch:* A flat horizontal line along the $V_X$ axis.\n\n*   **Saturation Region:**\n    The transistor turns on when $V_X \\ge V_{TH}$. It operates in saturation if the drain voltage is high enough, specifically $V_{DS} \\ge V_{GS} - V_{TH}$.\n    *   **Condition:** $V_X \\ge V_{TH}$ and $1\\text{ V} \\ge V_X - V_{TH}$\n    *   Rearranging the second inequality gives: $V_X \\le V_{TH} + 1\\text{ V}$\n    *   So, for $V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$, the transistor is in saturation.\n    *   **Current:** $I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2 = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$\n    *   *Sketch:* A parabolic curve that starts at zero when $V_X = V_{TH}$ and curves upwards.\n\n*   **Triode (Linear) Region:**\n    If $V_X$ increases further such that $V_{DS} < V_{GS} - V_{TH}$, the transistor enters the triode region.\n    *   **Condition:** $V_X > V_{TH} + 1\\text{ V}$\n    *   **Current:** $I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_{GS} - V_{TH})V_{DS} - \\frac{1}{2}V_{DS}^2 \\right]$\n    *   Substituting $V_{GS} = V_X$ and $V_{DS} = 1\\text{ V}$:\n        $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_{TH})(1) - \\frac{1}{2}(1)^2 \\right] = \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH} - 0.5)$$\n    *   *Sketch:* A straight line with a constant positive slope of $\\mu_n C_{ox} \\frac{W}{L}$.\n\n**3. Summary for the Sketch**\nThe plot of $I_X$ versus $V_X$ will have three distinct segments:\n1.  **$0 \\le V_X < V_{TH}$:** $I_X = 0$ (Cutoff).\n2.  **$V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$:** $I_X$ increases quadratically (Saturation).\n3.  **$V_X > V_{TH} + 1\\text{ V}$:** $I_X$ increases linearly (Triode).\n\nThe transition between the parabolic and linear regions at $V_X = V_{TH} + 1\\text{ V}$ is smooth (both the current value and its slope are continuous).\n\nHere is a textual representation of the sketch:\n\n```text\n      I_X\n       ^\n       |                                     /\n       |                                    /\n       |                                   /\n       |                                  /\n       |                                 /\n       |                                /  Triode (Linear)\n       |                               /   I_X ∝ (V_X - V_TH - 0.5)\n       |                              /\n       |                             /\n       |                            /\n       |                           /\n       |                          /\n       |                        .´\n       |                      .´\n       | Saturation         .´\n       | I_X ∝ (V_X-V_TH)² .´\n       |                 .´\n       |               .´\n       |             .´\n       |           .´\n       |         .´\n       |       .´\n       |     .´\n Cutoff|   .´\n I_X=0 | .´\n-------+--+----------------+---------------------> V_X\n       0 V_TH             V_TH + 1V\n```",
        "format": "markdown",
        "sha256": "5d2512b12d3397de658712c29daaf19a9b08fee6e74c8284cf84a0d8825c9f70"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions, with a quadratic rise from VTH to VTH + 1 V and a roughly linear rise beyond; the equations and transition are correct.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2184,
        "output_tokens": 11417,
        "total_tokens": 13601,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8746,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 6964,
        "total_tokens": 8056,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a step-by-step analysis to sketch $I_X$ versus $V_X$:\n\n### 1. Identify Circuit Parameters\n*   **Transistor ($M_1$):** NMOS transistor (indicated by the arrow pointing outwards at the source).\n*   **Gate-to-Source Voltage ($V_{GS}$):** The gate is connected to $V_X$ and the source is connected to ground ($0\\text{ V}$). Therefore, $V_{GS} = V_X$.\n*   **Drain-to-Source Voltage ($V_{DS}$):** The drain is connected to a $1\\text{ V}$ DC source and the source is at ground. Therefore, $V_{DS} = 1\\text{ V}$.\n*   **Drain Current ($I_D$):** The current $I_X$ is flowing into the drain terminal. Therefore, $I_X = I_D$.\n\n### 2. Analyze Regions of Operation\nThe NMOS transistor operates in different regions depending on the value of $V_X$ relative to its threshold voltage ($V_{TH}$).\n\n*   **Region 1: Cutoff**\n    *   **Condition:** $V_{GS} < V_{TH} \\Rightarrow V_X < V_{TH}$\n    *   **Behavior:** The transistor is OFF. No channel is formed.\n    *   **Current:** $I_X = 0$\n\n*   **Region 2: Saturation**\n    *   **Condition:** The transistor turns ON when $V_X \\ge V_{TH}$. It remains in saturation as long as $V_{DS} \\ge V_{GS} - V_{TH}$.\n    *   Substituting our values: $1\\text{ V} \\ge V_X - V_{TH}$, which simplifies to $V_X \\le V_{TH} + 1\\text{ V}$.\n    *   So, for **$V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$**, the transistor is in saturation.\n    *   **Current Equation:** $I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$\n    *   **Behavior:** The current has a **quadratic** (parabolic) relationship with $V_X$.\n\n*   **Region 3: Triode (Linear)**\n    *   **Condition:** The transistor enters the triode region when $V_{DS} < V_{GS} - V_{TH}$.\n    *   Substituting our values: $1\\text{ V} < V_X - V_{TH}$, which simplifies to $V_X > V_{TH} + 1\\text{ V}$.\n    *   So, for **$V_X > V_{TH} + 1\\text{ V}$**, the transistor is in the triode region.\n    *   **Current Equation:** $I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_{TH})V_{DS} - \\frac{V_{DS}^2}{2} \\right]$\n    *   Since $V_{DS} = 1\\text{ V}$ is constant, the equation becomes: $I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_{TH})(1) - 0.5 \\right]$\n    *   **Behavior:** The current has a **linear** relationship with $V_X$.\n\n### 3. Sketch Description\nCombining these three regions, the plot of $I_X$ versus $V_X$ will look like this:\n\n1.  **$0 \\le V_X < V_{TH}$:** A flat horizontal line at $I_X = 0$.\n2.  **$V_{TH} \\le V_X \\le V_{TH} + 1\\text{V}$:** A parabolic curve starting from zero at $V_X = V_{TH}$ and curving upwards.\n3.  **$V_X > V_{TH} + 1\\text{V}$:** A straight line with a constant positive slope, continuing smoothly from the end of the parabola.\n\nHere is a visual representation of the sketch:\n\n```text\n  I_X\n   ^\n   |                                     /\n   |                                   /\n   |                                 /  <-- Linear (Triode Region)\n   |                               /\n   |                             /\n   |                           /\n   |                         /\n   |                       .  <-- Transition point (V_X = V_TH + 1V)\n   |                     .\n   |                   .  <-- Quadratic (Saturation Region)\n   |                 .\n   |               .\n   |             .\n   |___________/__________________________________> V_X\n   0          V_TH       V_TH + 1V\n        Cutoff\n```",
        "format": "markdown",
        "sha256": "6fcfa4078fbd5ca56d3b4875321392831849505793809f2b34eca07357a9ed92"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions, with a quadratic rise from VTH to VTH + 1 V and a roughly linear rise beyond the transition.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2184,
        "output_tokens": 8375,
        "total_tokens": 10559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 4308,
        "total_tokens": 5400,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a step-by-step analysis to sketch the relationship between $I_X$ and $V_X$.\n\n### 1. Identify Circuit Parameters\nFirst, let's relate the given variables to the standard terminals of the NMOS transistor ($M_1$):\n*   **Gate Voltage ($V_G$):** Connected to the independent voltage source $V_X$. So, $V_G = V_X$.\n*   **Source Voltage ($V_S$):** Connected to ground. So, $V_S = 0\\text{ V}$.\n*   **Drain Voltage ($V_D$):** Connected to the $1\\text{ V}$ DC source. So, $V_D = 1\\text{ V}$.\n*   **Current ($I_X$):** This is the current flowing into the drain terminal. So, $I_X = I_D$ (Drain Current).\n\nFrom these, we can determine the key voltage differences that control the transistor:\n*   **Gate-to-Source Voltage ($V_{GS}$):** $V_{GS} = V_G - V_S = V_X - 0 = V_X$\n*   **Drain-to-Source Voltage ($V_{DS}$):** $V_{DS} = V_D - V_S = 1\\text{ V} - 0 = 1\\text{ V}$\n\n### 2. Analyze Transistor Operating Regions\nThe behavior of $I_X$ depends on the value of $V_X$ relative to the transistor's threshold voltage ($V_{TH}$). We will assume a standard enhancement-mode NMOS where $V_{TH} > 0$.\n\n**Region 1: Cutoff**\n*   **Condition:** The transistor is OFF when $V_{GS} \\le V_{TH}$.\n*   **In terms of $V_X$:** $V_X \\le V_{TH}$\n*   **Current:** $I_X = 0$\n*   **Sketch:** A flat horizontal line along the $V_X$ axis.\n\n**Region 2: Saturation**\n*   **Condition:** The transistor turns ON when $V_{GS} > V_{TH}$. It operates in saturation if the drain voltage is high enough: $V_{DS} \\ge V_{GS} - V_{TH}$.\n*   **In terms of $V_X$:**\n    *   $V_X > V_{TH}$ (to be ON)\n    *   $1\\text{ V} \\ge V_X - V_{TH} \\implies V_X \\le V_{TH} + 1\\text{ V}$\n*   **Combined Condition:** $V_{TH} < V_X \\le V_{TH} + 1\\text{ V}$\n*   **Current Equation:** $I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$\n*   **Sketch:** A quadratic curve (parabola) that starts at $0$ when $V_X = V_{TH}$ and curves upwards.\n\n**Region 3: Triode (Linear)**\n*   **Condition:** As $V_X$ continues to increase, the channel becomes very conductive, and the fixed $1\\text{ V}$ at the drain is no longer enough to keep it in saturation. This happens when $V_{DS} < V_{GS} - V_{TH}$.\n*   **In terms of $V_X$:**\n    *   $1\\text{ V} < V_X - V_{TH} \\implies V_X > V_{TH} + 1\\text{ V}$\n*   **Current Equation:** $I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_{TH})V_{DS} - \\frac{1}{2}V_{DS}^2 \\right]$\n    Substituting $V_{DS} = 1\\text{ V}$:\n    $I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_{TH})(1) - \\frac{1}{2}(1)^2 \\right]$\n    $I_X = \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH} - 0.5)$\n*   **Sketch:** This is a linear equation with respect to $V_X$. The curve becomes a straight line with a constant positive slope.\n\n### 3. Summary for the Sketch\nTo draw the $I_X$ vs. $V_X$ plot, follow these characteristics:\n\n1.  **Axes:** $V_X$ on the horizontal axis, $I_X$ on the vertical axis.\n2.  **$V_X < V_{TH}$:** Draw a line at $I_X = 0$.\n3.  **$V_{TH} < V_X < V_{TH} + 1\\text{ V}$:** Draw an upward-opening parabola starting from $(V_{TH}, 0)$.\n4.  **$V_X > V_{TH} + 1\\text{ V}$:** From the point where $V_X = V_{TH} + 1\\text{ V}$, the curve smoothly transitions into a straight, upward-sloping line.\n\n*(Note: The transition at $V_X = V_{TH} + 1\\text{ V}$ is smooth; both the current value and the slope are continuous between the saturation and triode regions.)*",
        "format": "markdown",
        "sha256": "b6c99530d6f393497df3f90fcac301a41002cd183944295c40574ad1ca043089"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, a quadratic saturation-region rise up to VTH + 1 V, and a roughly linear triode-region rise beyond it.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2184,
        "output_tokens": 10272,
        "total_tokens": 12456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7836,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 5360,
        "total_tokens": 6452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4109,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the device **cannot** act as a constant current source. Here is a step-by-step explanation of why:\n\n1.  **Identify the Device:** The symbol shown is for a **P-channel MOSFET (PMOS)**. We know this because the arrow on the top terminal (the source) is pointing inwards towards the channel.\n2.  **Analyze the Configuration:**\n    *   The top terminal is the **Source**, where the current $I_X$ enters.\n    *   The bottom terminal is the **Drain**, which is connected to ground ($0\\text{ V}$).\n    *   The left terminal is the **Gate**, which is also connected to ground ($0\\text{ V}$).\n    *   Because the gate and drain are connected to the same potential, this is known as a **diode-connected** configuration.\n3.  **Evaluate its Behavior:**\n    *   For a device to act as a current source, it must provide a constant current ($I_X$) regardless of the voltage applied across it (the voltage at the source terminal, let's call it $V_X$).\n    *   In this diode-connected PMOS configuration, the source-to-gate voltage ($V_{SG}$) and the source-to-drain voltage ($V_{SD}$) are both equal to $V_X$.\n    *   When $V_X$ is high enough to turn the transistor on ($V_X > |V_{THP}|$, where $V_{THP}$ is the threshold voltage), the transistor operates in the saturation region.\n    *   The current flowing through it is given by the equation:\n        $$I_X \\approx \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_X - |V_{THP}|)^2$$\n    *   This equation shows that the current $I_X$ is **strongly dependent** on the voltage $V_X$. If you change the voltage, the current changes quadratically.\n\n**Conclusion:**\nBecause the current $I_X$ varies significantly with the applied voltage, this device acts as a non-linear load (similar to a diode), not a constant current source. An ideal current source would have a flat I-V characteristic, meaning the current remains the same no matter the voltage.",
        "format": "markdown",
        "sha256": "56a70a0e7895737f281ea2740e2e2c6e7972269f0668d3378410f124b2d4621c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the PMOS, its connections, and the diode-connected configuration, and correctly concludes it is not a current source. However, it omits the key low-impedance (about 1/gm) explanation emphasized in the solution.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2158,
        "output_tokens": 21813,
        "total_tokens": 23971,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20537,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 15808,
        "total_tokens": 16887,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is the step-by-step analysis to determine if the device can act as a current source:\n\n1.  **Identify the Device:** The symbol shown is a **P-channel MOSFET (PMOS)**. We know this because the arrow on the top terminal points inward towards the gate/channel. In standard MOSFET symbols, this indicates the source terminal of a PMOS transistor.\n2.  **Analyze the Connections:**\n    *   The **Gate** is connected to ground ($V_G = 0\\text{ V}$).\n    *   The **Drain** (bottom terminal) is also connected to ground ($V_D = 0\\text{ V}$).\n    *   The **Source** (top terminal) has a current $I_X$ flowing into it. Let's call the voltage at this node $V_X$.\n3.  **Determine the Configuration:** Since both the gate and the drain are connected to the same potential (ground), they are effectively shorted together ($V_G = V_D$). This specific setup is known as a **diode-connected** configuration.\n4.  **Evaluate Current Source Characteristics:**\n    *   An ideal current source provides a constant current regardless of the voltage across it, which means it must have a very **high (ideally infinite) output impedance**.\n    *   In this diode-connected PMOS, the current $I_X$ is strongly dependent on the voltage $V_X$. The relationship is roughly quadratic: $I_X \\propto (V_X - |V_{th,p}|)^2$.\n    *   If you look into the source terminal, the small-signal equivalent resistance is approximately **$1/g_m$** (where $g_m$ is the transconductance). This is a relatively **low impedance**.\n    *   Because the current changes significantly if the voltage $V_X$ changes, it behaves more like a voltage reference or a diode rather than a current source.\n\n**Conclusion:**\n**No**, the device shown in the figure cannot act as a good current source. Its diode-connected configuration results in a low input impedance, meaning the current $I_X$ will vary greatly depending on the voltage applied at the source terminal.",
        "format": "markdown",
        "sha256": "0d36101710e0baec98b60415d6aaa426eab0340e66a8b5e020c3d0849691090a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS with gate and drain grounded, recognizes the diode-connected configuration, and explains that its roughly 1/gm low impedance makes it unsuitable as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2158,
        "output_tokens": 8803,
        "total_tokens": 10961,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7810,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 4032,
        "total_tokens": 5111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3548,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided:\n\n1.  **Identify the component:** The symbol represents a **MOSFET** (Metal-Oxide-Semiconductor Field-Effect Transistor).\n2.  **Determine the type:** The arrow on the top terminal points *inward* towards the channel. In standard circuit symbols, an inward-pointing arrow on the source terminal indicates a **P-channel MOSFET (PMOS)**.\n3.  **Analyze the connections:**\n    *   The **gate** (left terminal) is connected to ground.\n    *   The **drain** (bottom terminal) is connected to ground.\n    *   The **source** (top terminal) has a current $I_X$ flowing into it.\n4.  **Evaluate its function:** For a PMOS transistor to act as a current source (or sink, depending on perspective, but typically we say it \"sources\" current from a higher potential), it needs to be biased in its **saturation region**.\n    *   The condition for saturation in a PMOS is $V_{SG} > |V_{th}|$ (to turn it on) and $V_{SD} > V_{SG} - |V_{th}|$.\n    *   Here, the gate is at $0\\text{V}$ ($V_G = 0$) and the drain is at $0\\text{V}$ ($V_D = 0$).\n    *   If a positive voltage is applied to the source ($V_S > 0$), then $V_{SG} = V_S - 0 = V_S$. As long as $V_S$ is greater than the threshold voltage $|V_{th}|$, the transistor is ON.\n    *   Also, $V_{SD} = V_S - 0 = V_S$.\n    *   The saturation condition $V_{SD} > V_{SG} - |V_{th}|$ becomes $V_S > V_S - |V_{th}|$, which simplifies to $0 > -|V_{th}|$, or $|V_{th}| > 0$. This is always true for an enhancement-mode PMOS.\n    *   Therefore, as long as the source voltage is high enough to turn the transistor on ($V_S > |V_{th}|$), the PMOS will operate in the saturation region.\n    *   In the saturation region, the drain current is relatively independent of the drain-to-source voltage and is primarily determined by the gate-to-source voltage. Since $V_G$ is fixed at ground, if $V_S$ is fixed, it acts as a constant current source. Even if $V_S$ varies slightly, it will draw a current determined by its characteristic equation $I_D = \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_{SG} - |V_{th}|)^2$.\n    *   Often, this specific diode-connected-like configuration (though here gate and drain are separately grounded, it's effectively the same as connecting gate to drain if both are at the same potential) is used to create a specific current-voltage relationship, acting as a non-linear resistor or a load. However, if driven by a voltage at the source, it will *draw* a specific current.\n    *   More accurately, if you try to push a current $I_X$ into it, it will develop a corresponding voltage at the source terminal to accommodate that current. In this sense, it acts as a **load** rather than an independent ideal current source.\n    *   However, the question asks if it *can act* as a current source. In many circuit contexts, a transistor biased in saturation is referred to as a current source (e.g., in a current mirror). If we consider the device itself, it regulates the current based on the voltage across it. If it's part of a larger circuit where its gate is biased to a fixed voltage (here it's $0\\text{V}$), it will act as a current source (or more precisely, a current sink to ground) for whatever is connected to its source terminal, provided the source voltage is high enough.\n\nGiven the phrasing \"act as a current source\", in electronics, a transistor with a fixed gate-to-source voltage (or in this case, gate-to-drain voltage, acting as a two-terminal device) is often used to define a current. Because its gate and drain are both grounded, it acts like a diode-connected transistor. A diode-connected transistor is typically used as a **current sink** or an active load, not an independent current source that *provides* current to a circuit. It will draw a current $I_X$ depending on the voltage applied at the top terminal.\n\nTherefore, while it regulates current, it is more accurately described as an active load or a current sink in this specific configuration. However, in broad terms, devices that maintain a relatively constant current (or a current defined by a specific voltage) are often loosely called current sources in textbook problems.\n\nLet's re-read carefully: \"Can the device... act as a current source?\"\nIf you apply a voltage to the top terminal, it will draw a current. It does not *generate* current on its own. It acts as a non-linear resistor (diode-connected). It is typically not called a current source in this exact 2-terminal configuration (gate and drain grounded). It would be a current source if the gate was biased to a specific voltage and the drain was connected to the load.\n\nWait, let's look at the symbol again. It's a PMOS. Gate is grounded. Drain is grounded. This means $V_G = V_D = 0$.\nThis is exactly a **diode-connected PMOS** (since $V_G = V_D$, it's equivalent to connecting gate and drain together).\nA diode-connected transistor acts as a two-terminal device with a non-linear $I-V$ characteristic (similar to a diode). It does **not** act as an ideal current source (which would have infinite output impedance). Its current changes significantly with the applied voltage $V_S$.\nTherefore, it is generally **not** considered a current source. It's an active load.\n\n**Conclusion:**\nThe device is a PMOS transistor with its gate and drain connected to ground. This configuration makes it behave like a diode (diode-connected transistor). The current $I_X$ flowing through it will vary quadratically with the voltage applied at the source terminal (assuming saturation). A true current source should provide a constant current regardless of the voltage across it. Because its current is highly dependent on the voltage at the $I_X$ node, it does not act as a good current source.\n\n**Final Answer:**\nNo, it acts as a diode-connected load, not a current source, because its current depends heavily on the voltage applied to its source terminal.",
        "format": "markdown",
        "sha256": "7a3bfae20fe8af50a6dbd9087eb141fd24cf8af80343090782c203401816173a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the PMOS and its grounded gate/drain, and ultimately concludes that the diode-connected device is not a current source because its current varies with source voltage. However, it does not clearly identify the key low small-signal impedance (about 1/gm) and includes contradictory claims that it can act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2158,
        "output_tokens": 75933,
        "total_tokens": 78091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 73889,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 64404,
        "total_tokens": 65483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 62911,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification\n*   **Topology:** This is a **Common-Source (CS) Amplifier** with **source degeneration**.\n*   **Active Component ($M_1$):** The transistor is a **PMOS** (P-channel MOSFET). We can identify this by the symbol: the arrow is on the source terminal and points *inward* towards the channel. Furthermore, its source is oriented towards the positive supply ($V_{DD}$), which is standard for PMOS biasing.\n*   **Passive Components:**\n    *   **$R_S$:** Source resistor. It provides \"source degeneration,\" which is a form of local negative feedback.\n    *   **$R_D$:** Drain resistor. It acts as the load resistor, converting the transistor's output current into the output voltage ($V_{out}$).\n\n### 2. Qualitative Analysis (How it works)\n*   **Biasing:** For the PMOS transistor to operate as an amplifier, it must be biased in the saturation region. This means the source-to-gate voltage ($V_{SG}$) must be greater than the threshold voltage ($|V_{thp}|$), and the drain voltage must be sufficiently low.\n*   **Signal Amplification:**\n    *   When the input voltage **$V_{in}$ increases** (goes more positive), the source-to-gate voltage $V_{SG} = V_S - V_{in}$ **decreases**.\n    *   A smaller $V_{SG}$ causes the transistor to conduct less, meaning the drain current **$I_D$ decreases**.\n    *   The output voltage is determined by the voltage drop across $R_D$: $V_{out} = I_D \\times R_D$.\n    *   Since $I_D$ decreases, the voltage drop across $R_D$ decreases, causing **$V_{out}$ to decrease**.\n*   **Conclusion:** Because an increase in input leads to a decrease in output, this is an **inverting amplifier**.\n\n### 3. Quantitative Analysis (Small-Signal Model)\nTo find the key performance metrics of the amplifier, we use a small-signal equivalent circuit (assuming the transistor is in saturation and ignoring channel-length modulation, $r_o \\approx \\infty$, for simplicity).\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain is the ratio of the small-signal output voltage to the small-signal input voltage ($v_{out} / v_{in}$).\n    $$A_v = -\\frac{g_m R_D}{1 + g_m R_S}$$\n    *Where $g_m$ is the transconductance of the PMOS transistor.*\n    *   **Effect of $R_S$:** Without $R_S$, the gain would be simply $-g_m R_D$. The term $(1 + g_m R_S)$ in the denominator shows that source degeneration **reduces the overall voltage gain**. However, it makes the gain more stable, less dependent on the exact value of $g_m$ (which varies with temperature and manufacturing), and improves the linearity of the amplifier.\n\n*   **Input Resistance ($R_{in}$):**\n    Looking into the gate terminal of a MOSFET at low frequencies, the impedance is purely capacitive and effectively an open circuit.\n    $$R_{in} \\approx \\infty$$\n\n*   **Output Resistance ($R_{out}$):**\n    The output resistance is the resistance looking back into the output terminal ($V_{out}$) with the input grounded.\n    Looking down, we see $R_D$. Looking up into the drain of the degenerated PMOS, we see a very high resistance (ideally infinite if we ignore $r_o$). Therefore, the output resistance is dominated by the drain resistor.\n    $$R_{out} \\approx R_D$$\n    *(Note: If channel-length modulation $r_o$ is considered, the exact output resistance is $R_{out} = R_D \\parallel [r_o(1 + g_m R_S) + R_S]$, which is still typically very close to $R_D$).*\n\n### Summary of Characteristics\n*   **Type:** Inverting Voltage Amplifier\n*   **Input Impedance:** Very High (Ideal for not loading previous stages)\n*   **Output Impedance:** Moderate (Determined by $R_D$)\n*   **Voltage Gain:** Moderate, stabilized by negative feedback from $R_S$.",
        "format": "markdown",
        "sha256": "15b7f171d01a45fad20746b21a8e0d40467213f897dd2d9acaf577eeddb3bf84"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS).",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2230,
        "output_tokens": 14780,
        "total_tokens": 17010,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 6645,
        "total_tokens": 7760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5662,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\n*   **Topology:** The circuit is a **Common-Source (CS) Amplifier**.\n*   **Transistor Type:** The transistor $M_1$ is a **PMOS** (P-channel MOSFET). This is indicated by the arrow on the source terminal pointing *inward* towards the gate/channel.\n*   **Key Feature:** The presence of the resistor $R_S$ at the source terminal means this is specifically a **Common-Source amplifier with source degeneration**.\n\n### 2. Component Breakdown\n*   **$M_1$ (PMOS):** The active amplifying device.\n*   **$V_{DD}$:** The positive DC power supply.\n*   **$R_S$ (Source Resistor):** Provides negative feedback (source degeneration) to the amplifier.\n*   **$R_D$ (Drain Resistor):** Acts as the load resistor, converting the variations in drain current into the output voltage $V_{out}$.\n*   **$V_{in}$:** The input signal applied to the gate.\n*   **$V_{out}$:** The amplified output signal taken from the drain.\n\n### 3. DC Analysis (Biasing)\nFor the circuit to operate as a linear amplifier, the PMOS transistor $M_1$ must be biased in the **saturation region**.\n*   A DC bias voltage must be part of $V_{in}$ to ensure the source-to-gate voltage ($V_{SG}$) is greater than the threshold voltage magnitude ($|V_{th,p}|$).\n*   The DC current $I_D$ flows from $V_{DD}$, through $R_S$, through the transistor, and down through $R_D$ to ground.\n*   To remain in saturation, the drain voltage must be sufficiently low: $V_{SD} > V_{SG} - |V_{th,p}|$.\n\n### 4. AC (Small-Signal) Analysis\nTo understand how the circuit amplifies signals, we use a small-signal model. We assume the DC sources ($V_{DD}$) are AC grounds.\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain is the ratio of the output signal to the input signal ($v_{out} / v_{in}$).\n    Using the standard small-signal model (ignoring channel-length modulation, $r_o$, for simplicity):\n    $$A_v = \\frac{-g_m R_D}{1 + g_m R_S}$$\n    *Where $g_m$ is the transconductance of the MOSFET.*\n    *   **Inverting Nature:** The negative sign indicates that the amplifier is inverting (a positive change at the input results in a negative change at the output).\n    *   **Approximation:** If the source degeneration is strong enough that $g_m R_S \\gg 1$, the gain formula simplifies to:\n        $$A_v \\approx -\\frac{R_D}{R_S}$$\n        This is a highly desirable property because the gain becomes dependent only on the ratio of two passive resistors, making it very stable and independent of the transistor's specific characteristics.\n\n*   **Input Resistance ($R_{in}$):**\n    Looking into the gate of a MOSFET at low to moderate frequencies, the impedance is extremely high.\n    $$R_{in} \\approx \\infty$$\n\n*   **Output Resistance ($R_{out}$):**\n    Looking back into the output node (drain) with the input grounded, the resistance is dominated by the drain resistor.\n    $$R_{out} \\approx R_D$$\n    *(Note: If channel-length modulation $r_o$ is considered, the exact output resistance is slightly lower: $R_{out} = R_D \\parallel [r_o(1 + g_m R_S)]$, but $R_D$ is usually the dominant factor).*\n\n### 5. Summary of Source Degeneration Effects\nAdding $R_S$ to a standard common-source amplifier has several important trade-offs:\n1.  **Reduced Gain:** The gain is lower compared to a circuit without $R_S$ (where $A_v = -g_m R_D$).\n2.  **Increased Linearity:** It can handle larger input signal swings without distorting the output.\n3.  **Gain Stability:** The gain becomes less sensitive to variations in the transistor's transconductance ($g_m$), which can change with temperature or manufacturing tolerances.",
        "format": "markdown",
        "sha256": "79153e815e03d893a4c7fa3d5ed659ab216765b6b0d6d89551d2d39f33f17913"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the required inverting gain, −gmRD/(1 + gmRS).",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2230,
        "output_tokens": 11916,
        "total_tokens": 14146,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9838,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 7226,
        "total_tokens": 8341,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic provided, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\n*   **Transistor ($M_1$):** The symbol represents a **P-channel MOSFET (PMOS)**. We know this because the arrow is on the source terminal (top) and points inward towards the gate/channel.\n*   **Topology:** The input signal ($V_{in}$) is applied to the gate, and the output signal ($V_{out}$) is taken from the drain. The source terminal is connected to the power supply via a resistor. This configuration is a **Common-Source (CS) Amplifier with Source Degeneration**.\n*   **Components:**\n    *   $V_{DD}$: Positive DC power supply.\n    *   $R_S$: Source resistor. It provides \"source degeneration,\" which is a form of local negative feedback.\n    *   $R_D$: Drain resistor. It converts the transistor's output current into the output voltage $V_{out}$.\n    *   $V_{in}$: The input voltage (usually a small AC signal superimposed on a DC bias voltage).\n    *   $V_{out}$: The output voltage.\n\n---\n\n### 2. DC Analysis (Biasing)\nThe DC analysis determines the quiescent operating point (Q-point) of the transistor. For the circuit to act as an amplifier, the PMOS transistor must be biased in its **saturation region**.\n\n*   **Gate Voltage:** Assuming an ideal MOSFET with zero gate current, the DC gate voltage is simply the DC component of the input: $V_G = V_{in(DC)}$.\n*   **Source Voltage:** The voltage at the source node is the supply voltage minus the drop across $R_S$:\n    $$V_S = V_{DD} - I_D \\cdot R_S$$\n*   **Source-to-Gate Voltage ($V_{SG}$):**\n    $$V_{SG} = V_S - V_G = (V_{DD} - I_D \\cdot R_S) - V_{in(DC)}$$\n*   **Drain Voltage ($V_{out(DC)}$):** The DC output voltage is determined by the current flowing through $R_D$:\n    $$V_D = I_D \\cdot R_D$$\n*   **Drain Current ($I_D$):** In saturation, the current is governed by the square-law equation (ignoring channel-length modulation for simplicity):\n    $$I_D = \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_{SG} - |V_{th,p}|)^2$$\n    *(Where $\\mu_p C_{ox}$ is the process transconductance parameter, $W/L$ is the aspect ratio, and $V_{th,p}$ is the threshold voltage).*\n\nTo find the exact DC current, you would substitute the $V_{SG}$ equation into the $I_D$ equation and solve the resulting quadratic equation.\n\n---\n\n### 3. AC Small-Signal Analysis\nThis analysis determines how the circuit behaves with a small, time-varying input signal. We use a small-signal model where DC voltage sources ($V_{DD}$) become AC grounds.\n\n**A. Voltage Gain ($A_v = v_{out} / v_{in}$)**\nThe voltage gain tells us how much the input signal is amplified.\n*   If we assume the transistor's internal output resistance ($r_o$) is very large (ideal case), the voltage gain is:\n    $$A_v \\approx -\\frac{g_m R_D}{1 + g_m R_S}$$\n    *Where $g_m$ is the transconductance of the MOSFET.*\n*   **Interpretation:**\n    *   The **negative sign** indicates that this is an inverting amplifier (if $V_{in}$ goes up, $V_{out}$ goes down).\n    *   The term $(1 + g_m R_S)$ in the denominator is the \"degeneration factor.\" Compared to a standard common-source amplifier (where $A_v = -g_m R_D$), the gain here is **reduced** by this factor.\n\n**B. Input Resistance ($R_{in}$)**\nLooking into the gate of a MOSFET at low to medium frequencies, the gate is insulated by an oxide layer.\n*   $$R_{in} = \\infty$$ (Ideally)\n*   This high input impedance is a major advantage of MOSFET amplifiers, as they do not draw current from the preceding stage.\n\n**C. Output Resistance ($R_{out}$)**\nThis is the resistance looking back into the output node ($V_{out}$) with the input grounded.\n*   Assuming an ideal transistor ($r_o = \\infty$), the output resistance is simply the drain resistor:\n    $$R_{out} \\approx R_D$$\n*   *(If we include the transistor's internal resistance $r_o$, the exact formula is $R_{out} = R_D \\parallel [r_o(1 + g_m R_S) + R_S]$, but $R_D$ usually dominates).*\n\n---\n\n### Summary of Circuit Characteristics\nWhy use this specific circuit instead of a standard Common-Source amplifier without $R_S$?\n\n1.  **Lower, but more stable gain:** The resistor $R_S$ lowers the overall voltage gain. However, it makes the gain much less dependent on the exact value of $g_m$ (which can vary wildly with temperature and manufacturing). If $g_m R_S \\gg 1$, the gain approximates to $-R_D / R_S$, which is set entirely by stable passive components.\n2.  **Increased Linearity:** The negative feedback provided by $R_S$ allows the amplifier to handle larger input signals without distorting the output.\n3.  **Inverting:** The output signal is 180 degrees out of phase with the input signal.",
        "format": "markdown",
        "sha256": "fbb28b1d6233918a1e81833b83fd4403172bdc345e5562cb45ef01084cf94c2e"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gm RD/(1 + gm RS), matching the full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2230,
        "output_tokens": 12034,
        "total_tokens": 14264,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9786,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 6646,
        "total_tokens": 7761,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5352,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification\n*   **Component:** The active component is an **N-channel MOSFET** (NMOS), denoted as $M_1$. We know it's N-channel because the arrow on the source terminal points outward.\n*   **Topology:** The input signal ($V_{\\text{in}}$) is applied to the **Gate**. The output signal ($V_{\\text{out}}$) is taken from the **Source**. The **Drain** is connected directly to the DC supply voltage ($V_{DD}$), which acts as an AC ground.\n*   **Name:** This specific configuration is called a **Common-Drain Amplifier** or, more commonly, a **Source Follower**.\n\n### 2. DC Analysis (Biasing)\nFor the circuit to operate as an amplifier, the MOSFET must be biased in the **saturation region**.\n*   The output voltage $V_{\\text{out}}$ is the voltage across the source resistor $R_S$.\n*   The gate-to-source voltage is $V_{GS} = V_{\\text{in}} - V_{\\text{out}}$.\n*   For the transistor to conduct, $V_{GS}$ must be greater than the threshold voltage ($V_{TH}$). Therefore, $V_{\\text{in}} - V_{\\text{out}} > V_{TH}$, which means **$V_{\\text{out}} < V_{\\text{in}} - V_{TH}$**.\n*   The DC current flowing through the transistor ($I_D$) is determined by the input voltage and the value of $R_S$. The output voltage \"follows\" the input voltage but is shifted down by the value of $V_{GS}$.\n\n### 3. AC Analysis (Small-Signal Characteristics)\nWhen analyzing the small-signal (AC) behavior, we treat the DC supply $V_{DD}$ as an AC ground.\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain is the ratio of the AC output voltage to the AC input voltage ($v_{\\text{out}} / v_{\\text{in}}$).\n    The formula for the voltage gain of a source follower is:\n    $$A_v = \\frac{g_m R_S}{1 + g_m R_S}$$\n    *(where $g_m$ is the transconductance of the MOSFET)*\n    Because the denominator ($1 + g_m R_S$) is always slightly larger than the numerator ($g_m R_S$), the **voltage gain is always less than 1, but typically very close to 1** (e.g., 0.8 to 0.99). There is no phase inversion; the output signal is in phase with the input.\n\n*   **Input Resistance ($R_{\\text{in}}$):**\n    Looking into the gate of a MOSFET at low to moderate frequencies, the impedance is extremely high due to the insulating oxide layer.\n    **$R_{\\text{in}} \\approx \\infty$**\n\n*   **Output Resistance ($R_{\\text{out}}$):**\n    Looking back into the source terminal (ignoring $R_S$ for a moment), the resistance seen is $1/g_m$. The total output resistance of the stage is this value in parallel with the source resistor $R_S$.\n    **$R_{\\text{out}} = \\frac{1}{g_m} \\parallel R_S \\approx \\frac{1}{g_m}$**\n    Since $g_m$ is typically a few mA/V, $1/g_m$ is a relatively small value (often in the hundreds of ohms). Therefore, the **output resistance is low**.\n\n### 4. Summary and Application\nThe Source Follower circuit is characterized by:\n1.  **Voltage gain $\\approx 1$**\n2.  **Very high input impedance**\n3.  **Low output impedance**\n\n**Primary Application:**\nBecause of these characteristics, this circuit is primarily used as a **Voltage Buffer**. It is placed between a circuit with a high output impedance (which cannot provide much current) and a load with a low input impedance (which requires current). The source follower prevents the load from \"loading down\" the source, transferring the voltage signal efficiently without distortion.",
        "format": "markdown",
        "sha256": "14e521d586eaa016b00a27610ffc41bda628b2dc805bce5ec506acbbce4b009f"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as gmRS/(1 + gmRS). The output-resistance analysis is also consistent with the stated approximations.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 6246,
        "total_tokens": 8466,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3414,
        "total_tokens": 4524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2484,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Drain Amplifier**, more commonly known as a **Source Follower**.\n*   It uses an N-channel MOSFET (NMOS), labeled as $M_1$.\n*   The input signal ($V_{\\text{in}}$) is applied to the **Gate**.\n*   The output signal ($V_{\\text{out}}$) is taken from the **Source**.\n*   The **Drain** is connected directly to the DC power supply ($V_{DD}$), which acts as an AC ground. Because the drain is common to both the input and output AC loops, it gets the name \"common-drain.\"\n\n### 2. Component Breakdown\n*   **$M_1$**: An N-channel enhancement-mode MOSFET. It acts as the active amplifying device.\n*   **$V_{\\text{in}}$**: The input voltage signal.\n*   **$V_{\\text{out}}$**: The output voltage signal.\n*   **$V_{DD}$**: The positive DC power supply voltage.\n*   **$R_S$**: The source resistor. It provides DC biasing for the transistor and acts as the load for the amplifier.\n\n### 3. Principle of Operation (Why it's a \"Follower\")\nThe circuit is called a \"source follower\" because the voltage at the source terminal ($V_{\\text{out}}$) closely tracks or \"follows\" the voltage at the gate terminal ($V_{\\text{in}}$).\n\n*   **DC Behavior:** For the MOSFET to conduct, the gate-to-source voltage ($V_{GS}$) must be greater than the threshold voltage ($V_{TH}$). Therefore, $V_{\\text{in}} - V_{\\text{out}} = V_{GS}$. Rearranging this gives $V_{\\text{out}} = V_{\\text{in}} - V_{GS}$. The output is essentially the input voltage shifted down by a relatively constant amount ($V_{GS}$).\n*   **AC Behavior:** If $V_{\\text{in}}$ increases, the gate voltage rises. This temporarily increases $V_{GS}$, causing the transistor to conduct more current. This increased current flows through $R_S$, causing the voltage drop across $R_S$ ($V_{\\text{out}}$) to increase. $V_{\\text{out}}$ rises until a new equilibrium is reached, effectively \"following\" the input change.\n\n### 4. Key Characteristics (Small-Signal Analysis)\nAssuming the MOSFET is biased in the saturation region, the small-signal characteristics are as follows:\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain is positive (non-inverting) and is always slightly less than 1 (unity).\n    $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_S}{1 + g_m R_S}$$\n    *(Where $g_m$ is the transconductance of the MOSFET. If $g_m R_S \\gg 1$, then $A_v \\approx 1$)*\n\n*   **Input Resistance ($R_{\\text{in}}$):**\n    Because the input is connected to the insulated gate of a MOSFET, the DC input resistance is practically infinite at low frequencies.\n    $$R_{\\text{in}} \\approx \\infty$$\n\n*   **Output Resistance ($R_{\\text{out}}$):**\n    The output resistance is relatively low. It is the parallel combination of the source resistor $R_S$ and the resistance looking up into the source of the MOSFET ($1/g_m$).\n    $$R_{\\text{out}} = R_S \\parallel \\frac{1}{g_m} = \\frac{R_S}{1 + g_m R_S}$$\n    *(Since $1/g_m$ is typically a small value, the overall output resistance is low).*\n\n### 5. Primary Applications\nBecause this circuit has a voltage gain of ~1, a very high input impedance, and a low output impedance, it is primarily used as a **Voltage Buffer**.\n\n*   **Impedance Matching:** It is used to connect a high-impedance source (which cannot supply much current) to a low-impedance load (which requires more current) without loading down the source and causing a drop in signal voltage.\n*   **Level Shifting:** In DC coupled circuits, it can be used to shift a DC voltage level down by exactly one $V_{GS}$ drop.",
        "format": "markdown",
        "sha256": "d93c0e02fdca691fae15f65ac68f9f6090f46a0140a0e1ecb730330c71aeab4d"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as gm RS/(1 + gm RS); the supplementary output-resistance analysis is also correct under the stated assumptions.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 6128,
        "total_tokens": 8348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3066,
        "total_tokens": 4176,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2080,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Drain Amplifier**, more commonly known as a **Source Follower**. It is built using an N-channel MOSFET (NMOS).\n\n*   **Input:** Applied to the Gate terminal ($V_{\\text{in}}$).\n*   **Output:** Taken from the Source terminal ($V_{\\text{out}}$).\n*   **Common Terminal:** The Drain is connected directly to the DC supply ($V_{DD}$), which acts as an AC ground.\n\n### 2. Components\n*   **$M_1$:** An N-channel Enhancement-mode MOSFET. It is the active amplifying device.\n*   **$V_{DD}$:** The positive DC power supply voltage.\n*   **$V_{\\text{in}}$:** The input voltage signal.\n*   **$V_{\\text{out}}$:** The output voltage signal.\n*   **$R_S$:** The source resistor. It provides a path to ground for the DC bias current and acts as the load for the amplifier.\n\n### 3. Basic Operation (DC / Large Signal)\nThe fundamental characteristic of this circuit is that the output voltage \"follows\" the input voltage.\n*   For the transistor to conduct, the gate-to-source voltage ($V_{GS}$) must be greater than the threshold voltage ($V_{th}$).\n*   By Kirchhoff's Voltage Law, $V_{\\text{out}} = V_{\\text{in}} - V_{GS}$.\n*   As $V_{\\text{in}}$ increases, the transistor turns on harder, allowing more current to flow through $R_S$. This increased current causes the voltage drop across $R_S$ ($V_{\\text{out}}$) to increase.\n*   Therefore, $V_{\\text{out}}$ tracks the changes in $V_{\\text{in}}$, but is shifted down by a DC offset equal to $V_{GS}$.\n\n### 4. Small-Signal Characteristics (AC Analysis)\nWhen analyzing how this circuit handles small AC signals, it exhibits three key properties:\n\n*   **Voltage Gain ($A_v$):** The voltage gain is positive but always slightly less than 1 (unity).\n    $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_S}{1 + g_m R_S}$$\n    *(where $g_m$ is the transconductance of the MOSFET)*. Because the denominator is larger than the numerator, the gain is typically between 0.8 and 0.99. There is **no phase inversion** (input and output are in phase).\n*   **Input Impedance ($R_{\\text{in}}$):** Looking into the gate of a MOSFET, the impedance is extremely high (ideally infinite at low frequencies) because the gate is insulated from the channel.\n    $$R_{\\text{in}} \\approx \\infty$$\n*   **Output Impedance ($R_{\\text{out}}$):** Looking back into the source terminal, the impedance is relatively low. It is the parallel combination of the source resistor and the inverse of the transconductance.\n    $$R_{\\text{out}} = R_S \\parallel \\frac{1}{g_m} \\approx \\frac{1}{g_m}$$\n    *(since $1/g_m$ is usually much smaller than $R_S$)*.\n\n### 5. Summary of Features & Applications\nBecause it has a voltage gain of ~1, high input impedance, and low output impedance, the Source Follower is primarily used as a **Voltage Buffer**.\n\n**Typical Applications:**\n*   **Impedance Matching:** It is placed between a high-impedance source and a low-impedance load. It prevents the load from drawing too much current and \"loading down\" (dropping the voltage of) the source signal.\n*   **Level Shifting:** Because the DC output is lower than the DC input by $V_{GS}$, it is often used inside analog ICs to shift DC voltage levels down to match the input requirements of subsequent stages.\n*   **Output Stages:** Often used as the final stage of an amplifier to provide the current necessary to drive a heavy load (like a speaker or a long cable) without losing voltage amplitude.",
        "format": "markdown",
        "sha256": "ab17d35239ceb66cb11372294628600ac31ed7f6362fc9e7eb46ad4371111326"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain formula. The output-resistance expression is also correct under the stated usual approximations.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 5669,
        "total_tokens": 7889,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3918,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2402,
        "total_tokens": 3512,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1465,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic provided, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\n*   **Topology:** The circuit is a **Common-Gate (CG) amplifier**.\n*   **Transistor ($M_1$):** While the symbol (arrow pointing inwards on the source) can sometimes denote a PMOS in certain conventions, the circuit's biasing strongly indicates it is an **NMOS** transistor. The gate is tied directly to the positive supply voltage ($V_{DD}$). If it were a PMOS, tying the gate to $V_{DD}$ would keep it turned OFF for any input voltage between $0$ and $V_{DD}$. For an NMOS, this bias keeps the transistor strongly ON, which is standard for this configuration.\n*   **Connections:**\n    *   **Gate:** Connected to DC supply $V_{DD}$ (acts as an AC ground).\n    *   **Source:** Acts as the input terminal ($V_{in}$).\n    *   **Drain:** Acts as the output terminal ($V_{out}$), connected to $V_{DD}$ via a load resistor $R_D$.\n\n---\n\n### 2. DC (Large-Signal) Analysis\nThe DC analysis determines the operating region of the transistor based on the input voltage $V_{in}$.\n\n*   **Gate Voltage:** $V_G = V_{DD}$\n*   **Source Voltage:** $V_S = V_{in}$\n*   **Gate-to-Source Voltage:** $V_{GS} = V_G - V_S = V_{DD} - V_{in}$\n\nThe transistor's state depends on $V_{in}$ relative to its threshold voltage ($V_{th}$):\n\n**A. Cutoff Region (Transistor OFF)**\n*   **Condition:** $V_{GS} < V_{th} \\implies V_{DD} - V_{in} < V_{th} \\implies \\mathbf{V_{in} > V_{DD} - V_{th}}$\n*   **Behavior:** No drain current flows ($I_D = 0$). There is no voltage drop across $R_D$.\n*   **Output:** $V_{out} = V_{DD}$\n\n**B. Saturation Region (Active Amplifier Region)**\n*   **Condition:** The transistor is ON ($V_{in} \\le V_{DD} - V_{th}$) and the drain voltage is high enough: $V_D \\ge V_G - V_{th} \\implies \\mathbf{V_{out} \\ge V_{DD} - V_{th}}$\n*   **Current:** $I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2 = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{DD} - V_{in} - V_{th})^2$\n*   **Output:** $V_{out} = V_{DD} - I_D R_D$\n    As $V_{in}$ decreases, $V_{GS}$ increases, causing the drain current $I_D$ to increase quadratically, which in turn pulls $V_{out}$ down.\n\n**C. Triode (Linear) Region**\n*   **Condition:** If $V_{in}$ drops low enough, $I_D$ becomes large, causing a large voltage drop across $R_D$. If $V_{out}$ drops below $V_{DD} - V_{th}$, the transistor enters the triode region.\n*   **Behavior:** The transistor acts more like a voltage-controlled resistor, and the gain drops significantly.\n\n---\n\n### 3. AC (Small-Signal) Analysis\nFor small-signal analysis, we assume the transistor is biased in the **saturation region**.\n*   DC voltage sources ($V_{DD}$) become AC grounds.\n*   The gate is at AC ground ($v_g = 0$).\n*   Let $g_m$ be the transconductance, $g_{mb}$ be the body-effect transconductance, and $r_o$ be the channel output resistance.\n\n**A. Voltage Gain ($A_v = v_{out} / v_{in}$)**\nThe input signal $v_{in}$ is applied at the source, so $v_{gs} = v_g - v_s = 0 - v_{in} = -v_{in}$.\nApplying Kirchhoff's Current Law (KCL) at the output (drain) node:\n$$ \\frac{v_{out}}{R_D} + \\frac{v_{out} - v_{in}}{r_o} - (g_m + g_{mb})v_{in} = 0 $$\nSolving for the ratio $v_{out}/v_{in}$ gives the exact gain:\n$$ A_v = \\frac{(g_m + g_{mb})r_o + 1}{r_o + R_D} R_D $$\n*   **Ideal Approximation:** If we assume $r_o$ is very large ($r_o \\gg R_D$) and ignore the body effect ($g_{mb} = 0$), the gain simplifies to:\n    $$ \\mathbf{A_v \\approx g_m R_D} $$\n    *(Note: The gain is positive, meaning the output is in phase with the input).*\n\n**B. Input Resistance ($R_{in}$)**\nLooking into the source terminal, the input resistance is relatively low, which is a defining characteristic of a common-gate amplifier.\nThe exact formula, taking $r_o$ and $R_D$ into account, is:\n$$ R_{in} = \\frac{R_D + r_o}{1 + (g_m + g_{mb})r_o} $$\n*   **Ideal Approximation:** Assuming $r_o \\to \\infty$, this simplifies to:\n    $$ \\mathbf{R_{in} \\approx \\frac{1}{g_m + g_{mb}}} $$\n\n**C. Output Resistance ($R_{out}$)**\nLooking into the drain terminal with the input source $V_{in}$ grounded (ideal voltage source assumption):\n$$ \\mathbf{R_{out} = R_D \\parallel r_o} $$\n\n### Summary of Characteristics\nThis Common-Gate amplifier provides:\n1.  **Positive Voltage Gain** (Non-inverting).\n2.  **Low Input Impedance** ($\\approx 1/g_m$), making it useful as a current buffer or for impedance matching (e.g., matching a $50\\Omega$ antenna).\n3.  **Moderate to High Output Impedance** ($\\approx R_D$).",
        "format": "markdown",
        "sha256": "adf3c834f69c2aed1e619ac1093400c43d417e2fd830956e2ebedfef0fa272cb"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology with source input and AC-grounded gate, and gives the positive gain and low input resistance. Its finite-ro and body-effect expressions are consistent with the stated assumptions; the extra DC discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2162,
        "output_tokens": 16708,
        "total_tokens": 18870,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 11588,
        "total_tokens": 12669,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10125,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\n*   **Transistor Type:** The component labeled $M_1$ is an **N-channel MOSFET (NMOS)**. We know this because the arrow on the source terminal points outward.\n*   **Configuration:**\n    *   The **input signal ($V_{in}$)** is applied to the **Source** terminal.\n    *   The **output signal ($V_{out}$)** is taken from the **Drain** terminal.\n    *   The **Gate** terminal is connected directly to the DC power supply ($V_{DD}$). In AC (small-signal) analysis, a constant DC voltage source acts as an AC ground. Therefore, the gate is common to both the input and output AC signals.\n*   **Conclusion:** This circuit is a **Common-Gate (CG) Amplifier**.\n\n---\n\n### 2. Qualitative Analysis (How it works)\n*   **Biasing:** For the amplifier to work properly, the MOSFET must be biased in the saturation region. The gate is held at a high potential ($V_{DD}$). The DC level of $V_{in}$ must be low enough to ensure $V_{GS} > V_{TH}$ (Threshold Voltage) to turn the transistor on, but high enough to keep it in saturation.\n*   **Signal Amplification:**\n    *   If the input voltage $V_{in}$ *increases*, the gate-to-source voltage ($V_{GS} = V_G - V_S = V_{DD} - V_{in}$) *decreases*.\n    *   A decrease in $V_{GS}$ causes the drain current ($I_D$) to *decrease*.\n    *   The output voltage is determined by the voltage drop across the resistor $R_D$: $V_{out} = V_{DD} - (I_D \\times R_D)$.\n    *   Since $I_D$ decreased, the voltage drop across $R_D$ decreases, causing $V_{out}$ to *increase*.\n    *   Because an increase in input leads to an increase in output, this is a **non-inverting amplifier**.\n\n---\n\n### 3. Small-Signal AC Analysis\nTo find the performance metrics of this amplifier, we use a small-signal model. We assume the DC sources ($V_{DD}$) are AC grounds.\n*   $g_m$ = transconductance of the MOSFET\n*   $r_o$ = output resistance of the MOSFET (often assumed to be very large/infinite for simplified analysis)\n\n**A. Voltage Gain ($A_v$)**\nThe voltage gain is the ratio of the AC output voltage to the AC input voltage ($v_{out} / v_{in}$).\n*   The AC current generated by the transistor is $i_d = g_m \\cdot v_{gs}$.\n*   Since the gate is at AC ground, $v_{gs} = 0 - v_{in} = -v_{in}$.\n*   Therefore, $i_d = -g_m \\cdot v_{in}$.\n*   This current flows from the drain to the source. The current flowing *up* through $R_D$ from the output node to AC ground is $-i_d$.\n*   $v_{out} = (-i_d) \\cdot R_D = (-(-g_m \\cdot v_{in})) \\cdot R_D = g_m \\cdot R_D \\cdot v_{in}$\n*   **$A_v = \\frac{v_{out}}{v_{in}} = g_m R_D$**\n*(Note: The gain is positive, confirming it is non-inverting. It has the same magnitude as a Common-Source amplifier).*\n\n**B. Input Resistance ($R_{in}$)**\nThis is the resistance \"seen\" by the input signal source looking into the source terminal of the MOSFET.\n*   Looking into the source of a MOSFET (with the gate grounded), the resistance is approximately the inverse of the transconductance.\n*   **$R_{in} \\approx \\frac{1}{g_m}$**\n*(Note: This is typically a very low value, which is a defining characteristic of the Common-Gate topology).*\n\n**C. Output Resistance ($R_{out}$)**\nThis is the resistance \"seen\" looking back into the output terminal with the input source turned off (shorted to ground).\n*   Looking into the drain node, you see the drain resistor $R_D$ in parallel with the resistance looking down into the transistor's drain.\n*   If we include the transistor's internal output resistance ($r_o$), the total output resistance is:\n*   **$R_{out} = R_D \\parallel r_o$**\n*   If $r_o$ is assumed to be ideally infinite, then **$R_{out} \\approx R_D$**.\n\n---\n\n### Summary of Circuit Characteristics\n*   **Topology:** Common-Gate Amplifier\n*   **Voltage Gain:** Moderate to High, **Non-inverting** ($+g_m R_D$)\n*   **Input Resistance:** **Very Low** ($\\approx 1/g_m$)\n*   **Output Resistance:** Moderate to High ($\\approx R_D$)\n*   **Typical Application:** Because of its low input impedance, it is rarely used as a general-purpose voltage amplifier. It is most commonly used as a **current buffer** or in high-frequency RF applications (like cascode amplifiers) because it does not suffer from the Miller effect, which degrades high-frequency performance in other topologies.",
        "format": "markdown",
        "sha256": "c511ac7242cc073b58c981e6a372f973f4520541f064a1200ce94e5e99d5747c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the key results: non-inverting gain of approximately +gmRD and input resistance of approximately 1/gm. The additional analysis is consistent with the essential answer.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2162,
        "output_tokens": 9940,
        "total_tokens": 12102,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7534,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 4711,
        "total_tokens": 5792,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3492,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\n*   **Transistor ($M_1$):** The symbol indicates an N-channel MOSFET (NMOS).\n*   **Topology:**\n    *   The input signal ($V_{in}$) is applied to the **Source** terminal.\n    *   The output signal ($V_{out}$) is taken from the **Drain** terminal.\n    *   The **Gate** terminal is connected directly to the DC power supply ($V_{DD}$). In AC small-signal analysis, a DC voltage source acts as an AC ground. Therefore, the gate is common to both the input and output AC circuits.\n*   **Conclusion:** This circuit is a **Common-Gate (CG) Amplifier**.\n\n---\n\n### 2. DC Analysis (Biasing)\nFor the amplifier to operate linearly, the NMOS transistor $M_1$ must be biased in the **saturation region**.\n*   **Gate Voltage ($V_G$):** $V_G = V_{DD}$\n*   **Source Voltage ($V_S$):** The DC component of the input, $V_{in(DC)}$, sets the source voltage.\n*   **Gate-to-Source Voltage ($V_{GS}$):** $V_{GS} = V_{DD} - V_{in(DC)}$. For the transistor to be ON, $V_{GS}$ must be greater than the threshold voltage ($V_{th}$).\n*   **Drain Voltage ($V_D$):** $V_D = V_{DD} - I_D \\cdot R_D$, where $I_D$ is the DC drain current.\n*   **Saturation Condition:** To remain in saturation, the drain-to-source voltage ($V_{DS}$) must satisfy $V_{DS} \\ge V_{GS} - V_{th}$.\n\n---\n\n### 3. AC Small-Signal Analysis\nTo analyze the amplification properties, we use a small-signal equivalent circuit.\n*   **Assumptions:** We will initially ignore channel-length modulation ($r_o = \\infty$) and the body effect for simplicity.\n*   **AC Equivalents:**\n    *   $V_{DD}$ becomes an AC ground.\n    *   The Gate is at AC ground ($v_g = 0$).\n    *   $v_{gs} = v_g - v_s = 0 - v_{in} = -v_{in}$.\n\n#### A. Voltage Gain ($A_v$)\nThe voltage gain is the ratio of the output voltage to the input voltage ($A_v = v_{out} / v_{in}$).\n1.  The small-signal drain current is $i_d = g_m \\cdot v_{gs}$, where $g_m$ is the transconductance of the MOSFET.\n2.  Substituting $v_{gs}$: $i_d = g_m \\cdot (-v_{in}) = -g_m \\cdot v_{in}$.\n3.  This current flows from the drain to the source. The current flowing *out* of the drain node through $R_D$ to AC ground is $-i_d$.\n4.  By Ohm's law at the output node: $v_{out} = (-i_d) \\cdot R_D = -(-g_m \\cdot v_{in}) \\cdot R_D = g_m \\cdot R_D \\cdot v_{in}$.\n5.  Therefore, the voltage gain is:\n    $$A_v = \\frac{v_{out}}{v_{in}} = g_m R_D$$\n    *(Note: The gain is positive, meaning the Common-Gate amplifier is **non-inverting**).*\n\n#### B. Input Resistance ($R_{in}$)\nInput resistance is the resistance seen looking into the input terminal (the Source).\n1.  Apply a test voltage $v_x$ at the source. The current entering the source is $i_x$.\n2.  $v_{gs} = -v_x$.\n3.  The current source in the MOSFET model pulls a current $g_m \\cdot v_{gs} = -g_m \\cdot v_x$ from drain to source.\n4.  Therefore, the current flowing *out* of the source terminal is $-g_m \\cdot v_x$.\n5.  To satisfy Kirchhoff's Current Law, the input current $i_x$ must equal the current flowing out: $i_x = g_m \\cdot v_x$.\n6.  Therefore, the input resistance is:\n    $$R_{in} = \\frac{v_x}{i_x} = \\frac{1}{g_m}$$\n    *(Note: $1/g_m$ is typically a very small value, meaning this amplifier has a **low input impedance**).*\n\n#### C. Output Resistance ($R_{out}$)\nOutput resistance is the resistance seen looking into the output terminal (the Drain) with the input source turned off ($v_{in} = 0$).\n1.  If $v_{in} = 0$, then $v_s = 0$.\n2.  Since the gate is also grounded, $v_{gs} = 0 - 0 = 0$.\n3.  The dependent current source $g_m \\cdot v_{gs}$ becomes 0 (acts as an open circuit).\n4.  Looking into the drain, the only path to ground is through the resistor $R_D$.\n5.  Therefore, the output resistance is:\n    $$R_{out} = R_D$$\n\n---\n\n### 4. Summary of Characteristics\nThe Common-Gate amplifier shown in the figure has the following ideal characteristics:\n*   **Voltage Gain:** $A_v = g_m R_D$ (Moderate to High, Non-inverting)\n*   **Input Resistance:** $R_{in} = 1 / g_m$ (Low)\n*   **Output Resistance:** $R_{out} = R_D$ (Moderate to High)\n\n**Practical Note (Non-idealities):**\nIf we account for the **body effect** (since the source is not at ground potential) and **channel-length modulation** ($r_o$), the equations become slightly more complex:\n*   Gain: $A_v \\approx (g_m + g_{mb})R_D$\n*   Input Resistance: $R_{in} \\approx \\frac{1}{g_m + g_{mb}}$\n*   Output Resistance: $R_{out} = R_D \\parallel r_o$",
        "format": "markdown",
        "sha256": "1a1c31e18892ef5fe9d4ba9f65923e2bde66476a09f759db073130006f87bf62"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and derives the non-inverting gain and low input resistance. Its ideal results match the golden solution; the minor imprecision in the optional non-ideal gain note does not affect the essential answer.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2162,
        "output_tokens": 16487,
        "total_tokens": 18649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 4899,
        "total_tokens": 5980,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic provided, here is an analysis of the circuit.\n\n### 1. Circuit Identification and Components\n*   **Transistor ($M_1$):** This is an N-channel MOSFET (NMOS).\n*   **Topology:** The circuit resembles a **Common-Gate (CG)** amplifier configuration because the input is coupled to the source terminal, the output is taken from the drain, and the gate is connected to a DC bias voltage ($V_b$), which acts as an AC ground.\n*   **Components:**\n    *   $V_{DD}$: DC power supply.\n    *   $R_D$: Drain resistor, which converts the transistor's output current into a voltage.\n    *   $V_b$: DC bias voltage for the gate.\n    *   $C_1$: Coupling capacitor, intended to block DC while allowing the AC input signal ($V_{in}$) to pass.\n    *   $V_{in}$: AC input voltage source.\n\n---\n\n### 2. Literal Analysis (As Drawn)\nIf we analyze the circuit *exactly* as it is drawn in the image, there is a critical issue that prevents it from working as an amplifier.\n\n**Observation:** The source terminal of the MOSFET ($M_1$) is connected to a node that is **directly tied to ground**.\n\n*   **DC Analysis:**\n    *   The gate voltage is $V_G = V_b$.\n    *   The source voltage is $V_S = 0\\text{ V}$ (grounded).\n    *   The gate-to-source voltage is $V_{GS} = V_b - 0 = V_b$.\n    *   As long as $V_b$ is greater than the transistor's threshold voltage ($V_{TH}$), the transistor will turn ON and conduct a steady DC drain current ($I_D$).\n\n*   **AC (Small-Signal) Analysis:**\n    *   The gate is at AC ground because $V_b$ is a constant DC source ($v_g = 0$).\n    *   The source is at AC ground because it is physically wired to ground ($v_s = 0$).\n    *   Therefore, the AC gate-to-source voltage is $v_{gs} = v_g - v_s = 0 - 0 = 0\\text{ V}$.\n    *   Because $v_{gs} = 0$, the transistor produces no AC signal current ($i_d = g_m \\cdot v_{gs} = 0$).\n    *   The AC input signal $V_{in}$ passes through $C_1$ and goes directly into the short circuit to ground. It never affects the transistor.\n    *   **Result:** The AC output voltage $V_{out}$ is zero. The voltage gain is **0**.\n\n---\n\n### 3. Probable Intended Circuit (Common-Gate Amplifier)\nIt is highly likely that the direct ground connection at the source is a drawing error (a common typo in circuit diagrams). For a Common-Gate amplifier to function, there must be a DC path to ground for biasing, but it cannot be a direct short that kills the AC signal.\n\nUsually, the direct ground is replaced by a **source resistor ($R_S$)** or a **DC current source**.\n\nIf we assume the ground symbol was meant to be a biasing resistor $R_S$, here is how the intended circuit operates:\n\n**Intended AC Small-Signal Analysis:**\nAssuming $C_1$ acts as a short circuit at the operating frequencies (mid-band):\n1.  **Input:** The AC signal $v_{in}$ appears directly at the source terminal ($v_s = v_{in}$).\n2.  **Gate:** The gate remains at AC ground ($v_g = 0$).\n3.  **Control Voltage:** The AC gate-to-source voltage is $v_{gs} = v_g - v_s = 0 - v_{in} = -v_{in}$.\n4.  **Output:** The transistor generates an AC drain current $i_d = g_m \\cdot v_{gs} = -g_m \\cdot v_{in}$.\n5.  This current flows through $R_D$ (from ground up to the drain in the AC model), creating an output voltage:\n    $$v_{out} = -i_d \\cdot R_D = -(-g_m \\cdot v_{in}) \\cdot R_D = g_m \\cdot R_D \\cdot v_{in}$$\n6.  **Voltage Gain ($A_v$):**\n    $$A_v = \\frac{v_{out}}{v_{in}} = g_m R_D$$\n    *(Note: This ignores the transistor's output resistance $r_o$ for simplicity. If included, the gain is approximately $g_m(R_D || r_o)$).*\n\n**Summary of Intended CG Amplifier Characteristics:**\n*   **Voltage Gain:** Positive and typically greater than 1 ($+g_m R_D$). It is non-inverting.\n*   **Input Impedance:** Low (approximately $1/g_m$).\n*   **Output Impedance:** High (approximately $R_D$).",
        "format": "markdown",
        "sha256": "3e27d2656adb8c59c352b01de08f3bc59ef68decc078aa23c6a6f7cdf41a490b"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source is directly grounded, so the input is shorted to ground and the ideal voltage gain is zero. The discussion of a hypothetical intended circuit does not alter the correct as-drawn conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 10030,
        "total_tokens": 12206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7534,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 6065,
        "total_tokens": 7153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4925,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic provided, here is a detailed analysis of the circuit.\n\n### 1. Initial Observation & A Critical Schematic Flaw\nBefore diving into the standard analysis, it is important to point out a significant issue with the circuit exactly as it is drawn:\n*   **The Shorted Input:** The source terminal of the MOSFET ($M_1$) is directly connected to ground. The input signal $V_{in}$ is coupled through capacitor $C_1$ to this exact same node.\n*   **Literal Consequence:** Because the node after $C_1$ is tied directly to ground, the AC input signal is shorted to ground. The AC voltage at the source of $M_1$ will always be 0V. Since the gate is at a constant DC voltage ($V_b$), the AC gate-to-source voltage ($v_{gs}$) is 0V. Consequently, the transistor will not amplify any AC signal, and the AC output voltage will be zero.\n\n**However, in educational contexts, schematics sometimes contain typos.** It is highly probable that the ground symbol at the source is a mistake (perhaps it was meant to be a biasing resistor $R_S$ or a current source).\n\nAssuming that ground symbol is an error and the input signal is meant to reach the source terminal, this circuit is intended to be a **Common-Gate (CG) Amplifier**. The rest of this analysis will proceed based on this standard topology.\n\n---\n\n### 2. Intended Circuit Topology: Common-Gate Amplifier\nAssuming the direct ground connection at the source is removed, the circuit operates as a Common-Gate amplifier.\n*   **Input:** Applied to the **Source** terminal via coupling capacitor $C_1$.\n*   **Output:** Taken from the **Drain** terminal.\n*   **Common Terminal:** The **Gate** is connected to a DC bias voltage ($V_b$), making it an AC ground.\n\n### 3. DC Analysis (Biasing)\nThe DC operating point (Q-point) determines the state of the transistor before any AC signal is applied.\n*   **Gate Voltage ($V_G$):** Set by the external DC source $V_b$.\n*   **Source Voltage ($V_S$):** In a real circuit, there would be a DC path to ground here (like a resistor). Assuming it's biased correctly, $V_S$ will be at some DC level.\n*   **Gate-to-Source Voltage ($V_{GS}$):** $V_{GS} = V_b - V_S$. For the NMOS transistor to be ON and operating in the saturation region (necessary for amplification), $V_{GS}$ must be greater than the threshold voltage ($V_{th}$).\n*   **Drain Current ($I_D$):** The resulting DC current flowing through $R_D$ and $M_1$.\n*   **DC Output Voltage:** $V_{out(DC)} = V_{DD} - I_D \\cdot R_D$.\n\n### 4. AC Small-Signal Analysis\nTo understand how the circuit amplifies the AC signal $V_{in}$, we use a small-signal model.\n*   **Assumptions:**\n    *   $C_1$ is large enough to act as a short circuit at the operating frequencies.\n    *   DC voltage sources ($V_{DD}$ and $V_b$) are treated as AC grounds.\n\n**Key Characteristics of the Common-Gate Amplifier:**\n\n*   **Voltage Gain ($A_v$):**\n    The input voltage $v_{in}$ appears at the source. Since the gate is at AC ground ($v_g = 0$), the AC gate-to-source voltage is $v_{gs} = -v_{in}$.\n    The transistor generates an AC drain current $i_d = g_m \\cdot v_{gs} = -g_m \\cdot v_{in}$ (where $g_m$ is the transconductance).\n    This current flows from the drain to the source. The current flowing *up* through $R_D$ is $-i_d$.\n    Therefore, $v_{out} = (-i_d) \\cdot R_D = (-(-g_m \\cdot v_{in})) \\cdot R_D = g_m \\cdot R_D \\cdot v_{in}$.\n    *   **Formula:** **$A_v = \\frac{v_{out}}{v_{in}} \\approx g_m R_D$**\n    *   *Note:* The gain is positive, meaning the Common-Gate amplifier is **non-inverting** (the output is in phase with the input).\n\n*   **Input Impedance ($R_{in}$):**\n    Looking into the source terminal, the input signal \"sees\" the source of the transistor. The resistance looking into the source of a MOSFET is approximately $1/g_m$.\n    *   **Formula:** **$R_{in} \\approx \\frac{1}{g_m}$**\n    *   *Note:* This is typically a very **low** input impedance, which is a defining characteristic of CG amplifiers.\n\n*   **Output Impedance ($R_{out}$):**\n    Looking back into the output terminal (drain) with the input source turned off, you see the drain resistor $R_D$ in parallel with the transistor's output resistance ($r_o$). Usually, $r_o$ is much larger than $R_D$.\n    *   **Formula:** **$R_{out} \\approx R_D$** (or more accurately, $R_D || r_o$)\n    *   *Note:* This is typically a **moderate to high** output impedance.\n\n### Summary\nIf we ignore the likely schematic error (the grounded source), this is a **Common-Gate NMOS amplifier**. It is characterized by:\n1.  **Positive Voltage Gain** (Non-inverting)\n2.  **Low Input Impedance** (making it useful as a current buffer or for impedance matching in high-frequency RF circuits)\n3.  **High Output Impedance**",
        "format": "markdown",
        "sha256": "7ba272616f0cefbf613bf669cce2acc9e572c64a8beba6e6a3c6ac7f8ee828a6"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer notices that the source node is directly shorted to ground and correctly concludes that the ideal input and output signal are zero. Its common-gate analysis is explicitly conditional on removing that short, so it does not change the conclusion for the circuit as drawn.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 9160,
        "total_tokens": 11336,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6934,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 6629,
        "total_tokens": 7717,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5312,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic provided, here is a detailed analysis of the circuit.\n\n### 1. Initial Observation & A Critical Note on the Schematic\nBefore diving into the standard analysis, it is important to point out a likely drafting error in the provided schematic.\n\n*   **As Drawn (Literal Interpretation):** The source terminal of the MOSFET ($M_1$) is connected directly to ground. The input signal ($V_{in}$) passes through capacitor $C_1$ and also connects to this exact same grounded node. Because the input is shorted directly to ground, the AC signal will never reach the transistor. The AC gate-to-source voltage ($v_{gs}$) would be zero, resulting in **zero voltage gain**.\n*   **Intended Circuit:** In electronics textbooks and problems, this topology is almost always intended to be a **Common-Gate (CG) Amplifier**. For it to work, the direct ground connection at the source must be removed. The source should only connect to $C_1$ (and typically a biasing current source or resistor, which might be omitted for simplicity in an AC-only problem).\n\n**The analysis below assumes the direct ground connection at the source is a typo and analyzes the circuit as it was intended: a Common-Gate Amplifier.**\n\n---\n\n### 2. Circuit Identification: Common-Gate Amplifier\nAssuming the source is not shorted to ground, this circuit is a **Common-Gate (CG) amplifier**.\n*   **Input:** Applied to the **source** terminal via the coupling capacitor $C_1$.\n*   **Output:** Taken from the **drain** terminal.\n*   **Common Terminal:** The **gate** is connected to a constant DC bias voltage ($V_b$). Because it is a constant DC voltage, it acts as an **AC ground**. Thus, the gate is \"common\" to both input and output in the AC domain.\n\n### 3. DC Analysis (Biasing)\n*   **Gate Voltage:** The gate is held at a constant DC voltage, $V_G = V_b$.\n*   **Purpose:** $V_b$ must be set high enough to ensure the gate-to-source voltage ($V_{GS}$) is greater than the threshold voltage ($V_{TH}$) to turn the transistor ON, and to keep it operating in the **saturation region** for linear amplification.\n*   **Drain Resistor ($R_D$):** Converts the variations in drain current into the output voltage ($V_{out}$).\n\n### 4. AC Small-Signal Analysis\nTo analyze the AC performance (gain, impedances), we use the small-signal model.\n*   **Assumptions:**\n    *   Capacitor $C_1$ is large enough to act as a **short circuit** at the signal frequencies of interest.\n    *   DC voltage sources ($V_{DD}$ and $V_b$) are turned off, becoming **AC grounds**.\n\n**Small-Signal Equivalent Circuit:**\n1.  The Gate (g) is at AC ground ($v_g = 0$).\n2.  The Source (s) is connected to the input signal ($v_s = v_{in}$).\n3.  The Drain (d) is connected to $R_D$, which goes to AC ground. The output is at the drain ($v_d = v_{out}$).\n4.  The transistor is modeled as a dependent current source ($g_m v_{gs}$) flowing from drain to source.\n\n#### A. Voltage Gain ($A_v$)\nThe voltage gain is the ratio of output voltage to input voltage ($v_{out} / v_{in}$).\n*   The AC gate-to-source voltage is: $v_{gs} = v_g - v_s = 0 - v_{in} = -v_{in}$\n*   The AC drain current ($i_d$) flowing from drain to source is: $i_d = g_m \\cdot v_{gs} = g_m(-v_{in}) = -g_m v_{in}$\n*   This current must flow through $R_D$ from ground to the drain node.\n*   Using Ohm's law at the output node: $v_{out} = -i_d \\cdot R_D$\n*   Substitute $i_d$: $v_{out} = -(-g_m v_{in}) \\cdot R_D = g_m R_D v_{in}$\n\nTherefore, the voltage gain is:\n$$A_v = \\frac{v_{out}}{v_{in}} = g_m R_D$$\n*(Note: The gain is positive, meaning a Common-Gate amplifier is **non-inverting**).*\n\n#### B. Input Impedance ($R_{in}$)\nInput impedance is the resistance \"seen\" by the input source looking into the source terminal of the transistor.\n*   If we apply a test voltage $v_x$ at the source, the current $i_x$ entering the source is the opposite of the drain current.\n*   $i_x = -i_d = -(g_m v_{gs})$\n*   Since $v_{gs} = -v_x$, then $i_x = -g_m(-v_x) = g_m v_x$\n*   $R_{in} = \\frac{v_x}{i_x} = \\frac{v_x}{g_m v_x}$\n\nTherefore, the input impedance is:\n$$R_{in} = \\frac{1}{g_m}$$\n*(Note: This is a characteristically **low** input impedance, which is a defining feature of CG amplifiers).*\n\n#### C. Output Impedance ($R_{out}$)\nOutput impedance is the resistance \"seen\" looking back into the output terminal (drain) with the input source turned off ($v_{in} = 0$).\n*   If $v_{in} = 0$, then $v_s = 0$. Since $v_g = 0$, $v_{gs} = 0$.\n*   The dependent current source $g_m v_{gs}$ becomes 0 (an open circuit).\n*   Looking into the drain, the only path to AC ground is through $R_D$.\n\nTherefore, the output impedance is:\n$$R_{out} = R_D$$\n*(If channel-length modulation $r_o$ is considered, $R_{out} = R_D || r_o$)*\n\n### Summary of Characteristics\nIf corrected to be a proper Common-Gate amplifier, the circuit features:\n*   **Moderate to High Voltage Gain:** $A_v \\approx g_m R_D$\n*   **Non-inverting Output:** The output is in phase with the input.\n*   **Low Input Impedance:** $R_{in} \\approx 1/g_m$ (Makes it useful as a current buffer or for impedance matching to low-impedance sources like antennas).\n*   **Moderate to High Output Impedance:** $R_{out} \\approx R_D$",
        "format": "markdown",
        "sha256": "3dc2fc8c129dd84ffc605a352fb3ba9395689574c68e3b03cc1a9552ec2fbdee"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source is directly grounded, so the input is shorted and the as-drawn circuit has ideally zero gain. The additional common-gate analysis is explicitly hypothetical and does not change that conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 8528,
        "total_tokens": 10704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5067,
        "total_tokens": 6155,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3545,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, we can determine the number of poles by analyzing the small-signal equivalent circuit and identifying the independent energy storage elements (capacitors).\n\n1.  **Identify the Nodes:** In the small-signal AC model, the DC voltage source $V_{DD}$ is treated as an AC ground. The circuit has two independent nodes where the voltage can vary:\n    *   **Gate Node:** Connected to $R_S$, $C_{GS}$, and $C_{GD}$.\n    *   **Drain Node:** Connected to $R_D$, $C_{GD}$, and $C_{DB}$.\n\n2.  **Analyze the Capacitors:**\n    *   **$C_{GS}$ (Gate-to-Source):** Connects the gate node to the source. Since the source is grounded, it connects the gate to ground.\n    *   **$C_{GD}$ (Gate-to-Drain):** Connects the gate node to the drain node.\n    *   **$C_{DB}$ (Drain-to-Bulk):** Connects the drain node to the bulk. In this diagram, the bulk is tied to the source, which is grounded. So, it connects the drain to ground.\n    *   **$C_{SB}$ (Source-to-Bulk):** Connects the source to the bulk. Because both the source and the bulk are connected directly to ground, both terminals of $C_{SB}$ are grounded. This means $C_{SB}$ is shorted out and does not store any energy or affect the circuit's dynamics.\n\n3.  **Determine the Number of Poles:**\n    *   After removing the shorted $C_{SB}$, we are left with three capacitors: $C_{GS}$, $C_{GD}$, and $C_{DB}$.\n    *   These three capacitors are connected between two independent nodes (Gate and Drain) and ground.\n    *   Because they form a loop with the ground node (Ground $\\rightarrow$ $C_{GS}$ $\\rightarrow$ Gate $\\rightarrow$ $C_{GD}$ $\\rightarrow$ Drain $\\rightarrow$ $C_{DB}$ $\\rightarrow$ Ground), their voltages are not all independent ($V_{CGD} = V_{CGS} - V_{CDB}$).\n    *   The number of poles is equal to the number of independent state variables, which corresponds to the number of independent nodes with capacitance in this type of circuit.\n    *   Since there are **2** independent nodes (Gate and Drain) with associated capacitances, the system will have a 2nd-order transfer function.\n\nTherefore, the circuit has **2** poles.",
        "format": "markdown",
        "sha256": "8e58d18b60d40f9e6a992eeb4c75d5d11ac94904f858e4a8c6d46a73958a1f9a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes there are two poles and justifies the count: CSB is shorted because both terminals are grounded, while CGS, CGD, and CDB have only two independent capacitor voltages.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2185,
        "output_tokens": 10098,
        "total_tokens": 12283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8932,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 4454,
        "total_tokens": 5546,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, we can determine the number of poles by analyzing the independent energy storage elements (capacitors) and the independent nodes.\n\n1.  **Identify the Capacitors:** The circuit explicitly shows four parasitic capacitances: $C_{GS}$, $C_{GD}$, $C_{DB}$, and $C_{SB}$.\n2.  **Analyze Capacitor Connections:**\n    *   **$C_{SB}$ (Source-to-Bulk):** Both the source terminal and the bulk terminal of the MOSFET ($M_1$) are connected directly to ground. Because both ends of $C_{SB}$ are grounded, it is shorted out and stores no energy. It does not contribute to the circuit's poles.\n    *   **$C_{GS}$ (Gate-to-Source):** Connected between the Gate node and ground.\n    *   **$C_{DB}$ (Drain-to-Bulk):** Connected between the Drain node and ground.\n    *   **$C_{GD}$ (Gate-to-Drain):** Connected between the Gate node and the Drain node.\n3.  **Determine Independent Nodes/State Variables:**\n    *   After eliminating the shorted $C_{SB}$, we are left with three capacitors: $C_{GS}$, $C_{GD}$, and $C_{DB}$.\n    *   These capacitors are connected across two independent signal nodes: the **Gate** (input node after $R_S$) and the **Drain** (output node).\n    *   Because there are two independent nodes with unknown voltages that have capacitive paths to ground, the circuit requires two independent state variables (the voltages at these two nodes) to fully describe its dynamic behavior.\n    *   Alternatively, you can use the rule that the number of poles equals the number of capacitors minus the number of all-capacitor loops. We have 3 active capacitors ($C_{GS}$, $C_{GD}$, $C_{DB}$) that form 1 loop with ground. $3 - 1 = 2$ independent capacitors.\n\nA system with two independent state variables has a second-order transfer function, which means it has **2 poles**.",
        "format": "markdown",
        "sha256": "f397d606976f04e9f239ceee77eed45f24b0d462cad37a8de2a53e66e90f401e"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that CSB is shorted by grounding both terminals, and that CGS, CGD, and CDB leave two independent capacitor voltages, yielding two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2184,
        "output_tokens": 5904,
        "total_tokens": 8088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4980,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 3012,
        "total_tokens": 4104,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2559,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, we can determine the number of poles by analyzing the independent energy storage elements (capacitors) in the small-signal model.\n\n1.  **Identify all capacitors:** The schematic explicitly shows four parasitic capacitors: $C_{GS}$, $C_{GD}$, $C_{DB}$, and $C_{SB}$.\n2.  **Eliminate shorted capacitors:** Observe the source terminal of the MOSFET ($M_1$). It is connected directly to ground. The capacitor $C_{SB}$ (Source-to-Bulk capacitance) is connected between the source and ground. Because both of its terminals are at ground potential, $C_{SB}$ is shorted out. It stores no energy and does not contribute to the circuit's frequency response.\n3.  **Analyze the remaining capacitors:** We are left with three active capacitors: $C_{GS}$, $C_{GD}$, and $C_{DB}$.\n4.  **Determine independent nodes/loops:**\n    *   These three capacitors are connected between three nodes: the Gate, the Drain, and Ground.\n    *   They form an all-capacitor loop (Gate $\\rightarrow$ $C_{GD}$ $\\rightarrow$ Drain $\\rightarrow$ $C_{DB}$ $\\rightarrow$ Ground $\\rightarrow$ $C_{GS}$ $\\rightarrow$ Gate).\n    *   The number of poles is equal to the number of active capacitors minus the number of all-capacitor loops: $3 - 1 = 2$.\n    *   Alternatively, you can look at the number of independent nodes with unknown voltages. There are exactly two such nodes in this AC circuit: the **Gate node** and the **Drain node**. Each node will yield one independent differential equation (or one pole) in the transfer function.\n\nTherefore, the circuit is a 2nd-order system.\n\nThe circuit has **2** poles.",
        "format": "markdown",
        "sha256": "7525c8346d30ee29a2bdffbf891b35d2eb9cfd2a0de37589eb8be6929da83d14"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that CSB is shorted because both terminals are grounded and that the remaining three capacitors form a loop with only two independent voltages, yielding two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2184,
        "output_tokens": 6836,
        "total_tokens": 9020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6026,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 4299,
        "total_tokens": 5391,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3907,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its structure, operation, and small-signal characteristics.\n\n### 1. Circuit Topology and Identification\n*   **Active Device:** The circuit uses an N-channel MOSFET ($M_1$).\n*   **Basic Configuration:** The input signal ($V_{in}$) is applied to the **source** terminal, and the output signal ($V_{out}$) is taken from the **drain** terminal. Without the extra resistors, this is a standard **Common-Gate (CG)** amplifier.\n*   **Feedback Network:** Resistors $R_1$ and $R_2$ form a voltage divider connected to the output node. The tapped voltage, labeled $V_F$, is fed back to the **gate** of the MOSFET.\n*   **Overall Function:** This is a Common-Gate amplifier with **negative voltage feedback**.\n\n### 2. Qualitative Analysis (How it works)\nLet's trace a signal to understand the feedback mechanism:\n1.  **Input Change:** Assume $V_{in}$ increases.\n2.  **Basic Amplifier Response:** An increase in the source voltage ($V_s$) decreases the gate-to-source voltage ($V_{gs} = V_g - V_s$). A smaller $V_{gs}$ reduces the drain current ($I_D$).\n3.  **Output Change:** A smaller $I_D$ means less voltage drop across the drain resistor $R_D$, causing the output voltage $V_{out}$ to **increase**. (This confirms the basic Common-Gate amplifier is non-inverting).\n4.  **Feedback Action:** As $V_{out}$ increases, the voltage divider causes $V_F$ (the gate voltage) to increase as well.\n5.  **Correction:** An increase in gate voltage *increases* $V_{gs}$, which tries to *increase* $I_D$, opposing the initial decrease caused by $V_{in}$.\n6.  **Conclusion:** Because the feedback opposes the initial change, this is **negative feedback**.\n\n### 3. Feedback Classification\n*   **Sampling:** The feedback network ($R_1, R_2$) is connected directly to the output node, sensing the output voltage. This is **Voltage (Shunt) Sampling**.\n*   **Mixing:** The feedback voltage $V_F$ is applied to the gate, while the input $V_{in}$ is at the source. The transistor reacts to the difference between them ($V_{gs} = V_F - V_{in}$). This series addition/subtraction of voltages at the input loop is characteristic of **Series Mixing**.\n*   **Topology:** This is a **Series-Shunt** (or Voltage-Voltage) feedback amplifier. It behaves similarly to a discrete non-inverting operational amplifier configuration.\n\n### 4. Small-Signal Quantitative Analysis\nTo find the exact gain and impedances, we use a small-signal model.\n*   Assume the MOSFET has a transconductance $g_m$. For simplicity in the main formulas, we will assume the channel length modulation resistance $r_o$ is very large ($r_o \\approx \\infty$).\n*   Let the feedback factor be **$\\beta = \\frac{R_2}{R_1 + R_2}$**. Therefore, $v_g = \\beta v_{out}$.\n*   Let the effective load resistance be **$R_L' = R_D \\parallel (R_1 + R_2)$**.\n\n**A. Voltage Gain ($A_v = v_{out} / v_{in}$)**\nThe control voltage for the MOSFET is $v_{gs} = v_g - v_s = \\beta v_{out} - v_{in}$.\nApplying Kirchhoff's Current Law (KCL) at the output node:\n$$ \\frac{v_{out}}{R_D} + \\frac{v_{out}}{R_1 + R_2} + g_m v_{gs} = 0 $$\n$$ \\frac{v_{out}}{R_L'} + g_m (\\beta v_{out} - v_{in}) = 0 $$\n$$ v_{out} \\left( \\frac{1}{R_L'} + g_m \\beta \\right) = g_m v_{in} $$\n$$ v_{out} \\left( \\frac{1 + g_m \\beta R_L'}{R_L'} \\right) = g_m v_{in} $$\n$$ \\mathbf{A_v = \\frac{g_m R_L'}{1 + g_m \\beta R_L'}} $$\n*Note: If the loop gain ($g_m \\beta R_L'$) is much greater than 1, the gain simplifies to $A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}$, exactly like a non-inverting op-amp.*\n\n**B. Input Resistance ($R_{in}$)**\nSeries mixing at the input increases the input resistance compared to the open-loop circuit. The open-loop input resistance of a CG amplifier is $1/g_m$.\nUsing feedback theory ($R_{in, closed} = R_{in, open} \\cdot (1 + \\text{Loop Gain})$):\n$$ \\mathbf{R_{in} = \\frac{1}{g_m} (1 + g_m \\beta R_L') = \\frac{1}{g_m} + \\beta R_L'} $$\nThe feedback significantly increases the input impedance compared to a standard Common-Gate amplifier.\n\n**C. Output Resistance ($R_{out}$)**\nShunt sampling at the output decreases the output resistance. The open-loop output resistance is $R_L'$.\nUsing feedback theory ($R_{out, closed} = \\frac{R_{out, open}}{1 + \\text{Loop Gain}}$):\n$$ \\mathbf{R_{out} = \\frac{R_L'}{1 + g_m \\beta R_L'}} $$\nThis can also be written as $R_{out} = R_L' \\parallel \\frac{1}{g_m \\beta}$. The feedback lowers the output impedance, making it a better voltage source.\n\n### Summary\nThis circuit is a **discrete non-inverting amplifier** utilizing negative feedback. Compared to a standard Common-Gate amplifier, the addition of the $R_1-R_2$ feedback network provides:\n1.  A more stable, predictable voltage gain (less dependent on the transistor's exact $g_m$).\n2.  Higher input resistance.\n3.  Lower output resistance.",
        "format": "markdown",
        "sha256": "5380290472e3baf6f8d55d349aae2ac77637e0e78d32a43f9bf7a81bd608aa49"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative-feedback operation. The closed-loop gain expression and large-loop-gain limit match the golden solution; resistance discussions are not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 14172,
        "total_tokens": 16349,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 6531,
        "total_tokens": 7619,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its topology, function, and small-signal characteristics.\n\n### 1. Circuit Topology Identification\n*   **Core Amplifier:** The input signal ($V_{in}$) is applied to the **source** terminal of the NMOS transistor ($M_1$), and the output signal ($V_{out}$) is taken from the **drain** terminal. This is the fundamental structure of a **Common-Gate (CG)** amplifier.\n*   **Feedback Network:** Resistors $R_1$ and $R_2$ form a voltage divider that senses the output voltage ($V_{out}$) and feeds a fraction of it back to the **gate** terminal ($V_F$).\n*   **Overall Classification:** This circuit is a **Common-Gate amplifier with Voltage-Voltage (Series-Shunt) negative feedback**.\n\n### 2. Feedback Mechanism Analysis\n*   **Sampling (Shunt at Output):** The feedback network ($R_1, R_2$) is connected in parallel with the output node. It samples the output *voltage*.\n*   **Mixing (Series at Input):** The transistor's controlling voltage is $V_{GS} = V_G - V_S$. Here, $V_G = V_F$ (the feedback signal) and $V_S = V_{in}$ (the input signal). Therefore, $V_{GS} = V_F - V_{in}$. The feedback voltage and input voltage are effectively subtracted in series within the gate-source loop.\n*   **Negative Feedback Verification:**\n    1. If $V_{in}$ increases, the source voltage increases, causing $V_{GS}$ to decrease.\n    2. A smaller $V_{GS}$ reduces the drain current ($I_D$).\n    3. Less current through $R_D$ means the voltage drop across it decreases, causing $V_{out}$ to **increase** (Common-Gate is non-inverting).\n    4. An increased $V_{out}$ causes the feedback voltage $V_F$ (at the gate) to increase.\n    5. This increase in gate voltage tries to *increase* $V_{GS}$, opposing the initial decrease caused by $V_{in}$. Thus, the feedback is **negative**.\n\n### 3. DC Analysis (Biasing)\nThe feedback network also serves to bias the transistor.\n*   The DC gate voltage is determined by the output DC voltage: $V_G = V_{out} \\left( \\frac{R_2}{R_1 + R_2} \\right)$.\n*   Because $V_G$ is a fraction of $V_{out}$ (which is $V_D$), it is guaranteed that $V_D > V_G$.\n*   For an NMOS to be in saturation, $V_{DS} > V_{GS} - V_{TH}$, which simplifies to $V_D > V_G - V_{TH}$. Since $V_D > V_G$, the transistor is **always biased in the saturation region** (assuming it is turned on).\n\n### 4. Small-Signal Analysis\nLet's derive the key performance metrics. We will assume the transistor is in saturation with transconductance $g_m$ and ignore channel-length modulation ($r_o \\approx \\infty$) for clarity.\n\n**Definitions:**\n*   Feedback factor: $\\beta = \\frac{R_2}{R_1 + R_2}$\n*   Equivalent load resistance: $R_{eq} = R_D \\parallel (R_1 + R_2)$\n\n**A. Voltage Gain ($A_v = v_{out} / v_{in}$)**\n1.  The small-signal gate voltage is $v_g = v_f = \\beta v_{out}$.\n2.  The small-signal source voltage is $v_s = v_{in}$.\n3.  The controlling voltage is $v_{gs} = v_g - v_s = \\beta v_{out} - v_{in}$.\n4.  Applying Kirchhoff's Current Law (KCL) at the output node:\n    $$ \\frac{v_{out}}{R_D} + \\frac{v_{out}}{R_1 + R_2} + g_m v_{gs} = 0 $$\n    $$ \\frac{v_{out}}{R_{eq}} + g_m (\\beta v_{out} - v_{in}) = 0 $$\n    $$ v_{out} \\left( \\frac{1}{R_{eq}} + g_m \\beta \\right) = g_m v_{in} $$\n    $$ A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_{eq}}{1 + g_m \\beta R_{eq}} $$\n*Note: If the loop gain ($g_m \\beta R_{eq}$) is much greater than 1, the gain approximates to $1/\\beta = 1 + (R_1/R_2)$, making it highly stable and independent of transistor parameters.*\n\n**B. Input Resistance ($R_{in}$)**\nA standard Common-Gate amplifier has a low input resistance of approximately $1/g_m$. Series feedback at the input *increases* this resistance by the amount of feedback $(1 + \\text{Loop Gain})$.\n$$ R_{in} = R_{in(open-loop)} \\times (1 + \\text{Loop Gain}) $$\n$$ R_{in} = \\frac{1}{g_m} (1 + g_m \\beta R_{eq}) = \\frac{1}{g_m} + \\beta R_{eq} $$\n*The feedback significantly increases the input resistance compared to a standard CG amplifier.*\n\n**C. Output Resistance ($R_{out}$)**\nThe open-loop output resistance is simply $R_{eq}$. Shunt feedback at the output *decreases* the output resistance by the amount of feedback.\n$$ R_{out} = \\frac{R_{out(open-loop)}}{1 + \\text{Loop Gain}} $$\n$$ R_{out} = \\frac{R_{eq}}{1 + g_m \\beta R_{eq}} $$\n*The feedback lowers the output resistance, making the circuit a better voltage source.*\n\n### Summary\nThis circuit is a **non-inverting voltage amplifier**. By applying series-shunt negative feedback to a common-gate stage, the designer achieves:\n1.  A more stable, predictable voltage gain set largely by the resistor ratio $R_1/R_2$.\n2.  A higher input resistance than a standard common-gate amplifier.\n3.  A lower output resistance.\n4.  Self-biasing that ensures the transistor remains in the saturation region.",
        "format": "markdown",
        "sha256": "bca0ef8b81a53ea87cc51da17de6a5ad14cd042dee20d2489cb0547e6b8c38e6"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain. The optional resistance and biasing discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 12509,
        "total_tokens": 14685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9810,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 6031,
        "total_tokens": 7119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\n*   **Core Topology:** The input signal ($V_{in}$) is applied to the **source** terminal of the NMOS transistor ($M_1$), and the output signal ($V_{out}$) is taken from the **drain** terminal. This identifies the core amplifier as a **Common-Gate (CG)** configuration.\n*   **Feedback Network:** Resistors $R_1$ and $R_2$ form a voltage divider that connects the output node ($V_{out}$) back to the **gate** terminal ($V_F$).\n*   **Feedback Type:**\n    *   **Sampling:** The feedback network is connected directly across the output node, meaning it samples the output **voltage** (shunt sampling).\n    *   **Mixing:** The feedback voltage ($V_F$) is applied to the gate, while the input ($V_{in}$) is at the source. The transistor is controlled by the gate-source voltage: $V_{gs} = V_F - V_{in}$. Because the feedback signal is subtracted from the input signal in the main loop, this is **series mixing**.\n    *   **Conclusion:** This is a **Voltage-Series (or Series-Shunt) negative feedback amplifier**.\n\n### 2. Qualitative Analysis (How it works)\n*   **Non-Inverting Amplification:** If $V_{in}$ increases, the source voltage rises. Assuming the gate voltage is momentarily constant, $V_{gs}$ decreases (becomes less positive). This reduces the drain current ($I_D$). A smaller $I_D$ means a smaller voltage drop across $R_D$, causing $V_{out}$ to **increase**. Therefore, the amplifier is non-inverting.\n*   **Negative Feedback Mechanism:** Suppose $V_{out}$ tries to increase (due to a disturbance or signal). The voltage divider ($R_1, R_2$) causes $V_F$ (the gate voltage) to increase as well. An increase in gate voltage increases $V_{gs}$, which increases the drain current $I_D$. The increased current pulls more voltage across $R_D$, which acts to pull $V_{out}$ back **down**. This confirms the presence of negative feedback, which stabilizes the gain and alters input/output impedances.\n\n### 3. Quantitative (Small-Signal) Analysis\nTo derive the exact formulas, we use a small-signal model.\n*   **Assumptions:** The MOSFET is biased in the saturation region. We will ignore channel-length modulation ($r_o \\approx \\infty$) for a clearer, simplified analysis.\n*   **Definitions:**\n    *   Transconductance of $M_1$: $g_m$\n    *   Feedback factor: $\\beta = \\frac{R_2}{R_1 + R_2}$\n    *   Effective load resistance: $R_L' = R_D \\parallel (R_1 + R_2)$ (since $R_1$ and $R_2$ act as a load in parallel with $R_D$ for AC signals).\n\n#### A. Voltage Gain ($A_v = V_{out} / V_{in}$)\n1.  The feedback voltage at the gate is: $v_g = v_f = \\beta \\cdot v_{out}$\n2.  The input voltage is at the source: $v_s = v_{in}$\n3.  The controlling voltage is: $v_{gs} = v_g - v_s = \\beta \\cdot v_{out} - v_{in}$\n4.  Applying Kirchhoff's Current Law (KCL) at the drain node ($V_{out}$):\n    The current from the dependent source ($g_m v_{gs}$) must equal the current flowing through the effective load ($R_L'$).\n    $g_m \\cdot v_{gs} + \\frac{v_{out}}{R_L'} = 0$\n5.  Substitute $v_{gs}$:\n    $g_m (\\beta \\cdot v_{out} - v_{in}) + \\frac{v_{out}}{R_L'} = 0$\n    $g_m \\beta \\cdot v_{out} + \\frac{v_{out}}{R_L'} = g_m \\cdot v_{in}$\n    $v_{out} \\left( g_m \\beta + \\frac{1}{R_L'} \\right) = g_m \\cdot v_{in}$\n6.  Solve for Gain ($A_v$):\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m}{\\frac{1}{R_L'} + g_m \\beta} = \\frac{g_m R_L'}{1 + g_m \\beta R_L'}$$\n    *(Note: $g_m R_L'$ is the open-loop gain, and $g_m \\beta R_L'$ is the loop gain $T$. This matches the standard feedback formula $A = \\frac{A_{open}}{1+T}$)*\n\n#### B. Input Resistance ($R_{in}$)\nLooking into the source terminal, the input resistance of a standard Common-Gate amplifier is $1/g_m$. Series feedback *increases* input resistance by a factor of $(1 + T)$.\n1.  Input current $i_{in}$ entering the source equals the negative of the drain current: $i_{in} = -g_m v_{gs}$\n2.  $i_{in} = -g_m (\\beta \\cdot v_{out} - v_{in})$\n3.  Substitute $v_{out} = A_v \\cdot v_{in}$:\n    $i_{in} = -g_m (\\beta A_v v_{in} - v_{in}) = g_m v_{in} (1 - \\beta A_v)$\n4.  Substitute the $A_v$ formula derived above and simplify:\n    $$R_{in} = \\frac{v_{in}}{i_{in}} = \\frac{1 + g_m \\beta R_L'}{g_m} = \\frac{1}{g_m} + \\beta R_L'$$\n    *(The input resistance is significantly higher than a standard Common-Gate amplifier due to the feedback).*\n\n#### C. Output Resistance ($R_{out}$)\nLooking into the drain terminal, the open-loop output resistance is $R_L'$. Voltage (shunt) sampling *decreases* output resistance by a factor of $(1 + T)$.\nUsing standard feedback theory:\n$$R_{out} = \\frac{R_{out(open)}}{1 + T} = \\frac{R_L'}{1 + g_m \\beta R_L'}$$\nWhere $R_L' = R_D \\parallel (R_1 + R_2)$.\n\n### Summary of Circuit Characteristics\n*   **Function:** Non-inverting voltage amplifier.\n*   **Gain:** Lower and more stable than a standard Common-Gate amplifier, heavily dependent on the resistor ratio $R_1/R_2$ if loop gain is high.\n*   **Input Impedance:** Moderately high (increased by feedback compared to standard CG).\n*   **Output Impedance:** Low (decreased by feedback compared to standard CG).",
        "format": "markdown",
        "sha256": "0ef032b6edc74c2d3848f6b66a0187e66027a3dff287aa010ff0c360f2b0c236"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback; the derived closed-loop gain matches the golden solution. Any ancillary impedance discussion is not required for full credit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 13506,
        "total_tokens": 15682,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10246,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5852,
        "total_tokens": 6940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4248,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification\nThis circuit is a **Common-Drain Amplifier**, more commonly known as a **Source Follower**.\n*   **$M_1$** is the main amplifying transistor. The input signal ($V_{in}$) is applied to its gate, and the output signal ($V_{out}$) is taken from its source.\n*   **$M_2$** acts as an **active load**. Its gate is connected to a constant DC bias voltage ($V_b$), which causes it to operate as a constant current source (assuming it is biased in the saturation region).\n\n### 2. DC Analysis (Biasing)\n*   **Current Source:** Transistor $M_2$ is biased by $V_b$ to provide a constant DC drain current ($I_D$). This current flows through both $M_1$ and $M_2$. Using an active load ($M_2$) instead of a simple resistor saves significant area on an integrated circuit and provides a more ideal current source.\n*   **Level Shifting:** In DC operation, the output voltage is lower than the input voltage by the gate-to-source voltage of $M_1$.\n    $$V_{out} = V_{in} - V_{GS1}$$\n    Because $M_2$ forces a constant current through $M_1$, $V_{GS1}$ remains relatively constant. Therefore, the output voltage \"follows\" the input voltage with a DC level shift downwards.\n\n### 3. Small-Signal AC Analysis\nTo understand how the circuit processes AC signals, we look at its small-signal characteristics. We assume both transistors are operating in the saturation region.\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain is defined as $v_{out} / v_{in}$. In an ideal source follower, the gain is exactly 1. However, in reality, it is slightly less than 1 due to the **body effect** (since the source of $M_1$ is not tied to the bulk/substrate) and the finite output resistances of the transistors.\n    The exact small-signal voltage gain is:\n    $$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}$$\n    Where:\n    *   $g_{m1}$ is the transconductance of $M_1$.\n    *   $g_{mb1}$ is the body effect transconductance of $M_1$.\n    *   $r_{o1}$ and $r_{o2}$ are the output resistances of $M_1$ and $M_2$.\n\n    Assuming $r_{o1}$ and $r_{o2}$ are very large, this simplifies to:\n    $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta}$$\n    *(where $\\eta = g_{mb1}/g_{m1}$, typically around 0.1 to 0.3. Thus, the gain is usually between 0.75 and 0.9).*\n\n*   **Input Resistance ($R_{in}$):**\n    Looking into the gate of a MOSFET at low frequencies, the impedance is purely capacitive and effectively infinite for DC/low-frequency AC.\n    $$R_{in} \\approx \\infty$$\n\n*   **Output Resistance ($R_{out}$):**\n    The output resistance is found by looking back into the output node (source of $M_1$). It is determined by the parallel combination of the resistance looking up into $M_1$ and down into $M_2$.\n    $$R_{out} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2}$$\n    Because $1/g_{m1}$ is typically much smaller than $r_{o1}$ or $r_{o2}$, it simplifies to:\n    $$R_{out} \\approx \\frac{1}{g_{m1} + g_{mb1}} \\approx \\frac{1}{g_{m1}}$$\n    This is a relatively **low** output resistance.\n\n### 4. Summary of Circuit Function\nThis circuit functions as a **Voltage Buffer**. Its key characteristics make it highly useful in analog design:\n1.  **High Input Impedance:** It draws almost zero current from the preceding stage, preventing \"loading\" effects.\n2.  **Low Output Impedance:** It can drive subsequent stages or loads that require more current without the signal voltage dropping significantly.\n3.  **Unity(ish) Gain:** It passes the voltage signal through almost unchanged in amplitude ($A_v \\approx 1$).\n4.  **DC Level Shifter:** It shifts the DC level of the signal down by $V_{GS1}$, which is often necessary to properly bias subsequent amplifier stages.",
        "format": "markdown",
        "sha256": "656d95f4984c2214b23363a82c9bca79fd1f806ac08962d8931e3899a22c4c0e"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as a current-source load, with positive gain below unity. Its gain expression matches the golden result, and it also gives the expected low output resistance.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 7579,
        "total_tokens": 9799,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5440,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3862,
        "total_tokens": 4972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2766,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification\n*   **Topology:** The circuit is a **Common-Drain Amplifier**, more commonly known as a **Source Follower**.\n*   **Components:** It consists of two N-channel MOSFETs (NMOS).\n    *   **$M_1$ (Top Transistor):** This is the primary amplifying device. The input signal ($V_{in}$) is applied to its gate, and the output signal ($V_{out}$) is taken from its source. Its drain is connected to the AC ground ($V_{DD}$).\n    *   **$M_2$ (Bottom Transistor):** This transistor acts as an **active load** or a **constant current source**. Its gate is connected to a fixed DC bias voltage ($V_b$), which keeps it in the saturation region, drawing a relatively constant current.\n\n### 2. DC Operation (Biasing)\n*   The bias voltage $V_b$ sets the gate-source voltage of $M_2$. Assuming $M_2$ is operating in saturation, it establishes a constant DC drain current ($I_D$) that flows through both $M_1$ and $M_2$.\n*   Because $M_1$ must pass this same current $I_D$, it establishes a specific gate-source voltage, $V_{GS1}$.\n*   The DC output voltage is related to the input by the equation:\n    $$V_{out} = V_{in} - V_{GS1}$$\n*   Because $V_{GS1}$ remains relatively constant (since the current is constant), the output voltage \"follows\" the input voltage, just shifted down by the value of $V_{GS1}$. This is why it is called a \"level shifter.\"\n\n### 3. AC (Small-Signal) Characteristics\nWhen analyzing the circuit for small AC signals (where $V_{DD}$ and $V_b$ act as AC grounds), the circuit exhibits the following key properties:\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain is positive and **slightly less than 1** (unity).\n    Ideally, if we ignore the body effect and channel-length modulation, $A_v \\approx 1$. However, in reality, the gain is reduced by the body effect of $M_1$ (since its source is not tied to the bulk/ground) and the finite output resistance of both transistors.\n    The approximate formula for the gain is:\n    $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}$$\n    *(Where $g_m$ is transconductance, $g_{mb}$ is body effect transconductance, and $r_o$ is output resistance).*\n\n*   **Input Impedance ($R_{in}$):**\n    The input impedance is **very high** (ideally infinite at low frequencies) because the input is connected directly to the insulated gate of MOSFET $M_1$. No steady-state DC current flows into the gate.\n\n*   **Output Impedance ($R_{out}$):**\n    The output impedance is **relatively low**. Looking back into the source of $M_1$, the impedance is approximately $1/g_{m1}$.\n    The exact formula is:\n    $$R_{out} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m1}}$$\n\n### 4. Summary of Applications\nBecause this circuit has high input impedance, low output impedance, and a voltage gain of approximately 1, it is primarily used as a **Voltage Buffer**.\n*   **Impedance Matching:** It can connect a high-impedance source to a low-impedance load without loading down the source (preventing signal loss).\n*   **Level Shifting:** It is used in analog design to shift a DC voltage level down by $V_{GS}$ to make it compatible with subsequent stages in a larger circuit.",
        "format": "markdown",
        "sha256": "b8fc77925e029313d410082daa43a698cfef8f51ffafb8c08299fd2fb76709b7"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as a current-source load, with a positive gain slightly below unity. The gain and output-resistance expressions capture body effect and finite output resistance; minor approximation wording does not affect the essential answer.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 7687,
        "total_tokens": 9907,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3566,
        "total_tokens": 4676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Drain Amplifier**, more commonly known as a **Source Follower**.\n*   **$M_1$ (Top Transistor):** This is an NMOS transistor acting as the primary amplifying device. The input signal ($V_{\\text{in}}$) is applied to its gate, and the output ($V_{\\text{out}}$) is taken from its source.\n*   **$M_2$ (Bottom Transistor):** This is also an NMOS transistor. Because its gate is connected to a constant DC bias voltage ($V_b$), it acts as a **constant current source** (or active load) for $M_1$.\n\n### 2. Qualitative Operation\n*   **Voltage Tracking:** In a MOSFET operating in saturation, the current is primarily determined by the gate-to-source voltage ($V_{GS}$). Because $M_2$ forces a constant current through $M_1$, the $V_{GS}$ of $M_1$ must remain relatively constant.\n*   Therefore, if the input voltage ($V_{\\text{in}}$ at the gate) increases, the output voltage ($V_{\\text{out}}$ at the source) must also increase by nearly the same amount to keep $V_{GS}$ constant. The source voltage \"follows\" the gate voltage.\n*   **Level Shifting:** The output voltage is not exactly equal to the input voltage. It is shifted down by the value of $V_{GS1}$. Mathematically: $V_{\\text{out}} \\approx V_{\\text{in}} - V_{GS1}$.\n\n### 3. Small-Signal Analysis (Quantitative)\nAssuming both transistors are biased in the saturation region, we can analyze the small-signal characteristics (AC performance).\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain is defined as $v_{\\text{out}} / v_{\\text{in}}$. Taking into account the transconductance ($g_{m1}$), the output resistances of both transistors ($r_{o1}$, $r_{o2}$), and the body effect ($g_{mb1}$) because the source of $M_1$ is not tied to ground, the gain is:\n    $$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1} \\parallel r_{o2}}}$$\n    Because $r_{o1}$ and $r_{o2}$ are typically very large, the term $\\frac{1}{r_{o1} \\parallel r_{o2}}$ is very small. The equation simplifies to:\n    $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\frac{g_{mb1}}{g_{m1}}}$$\n    *Result:* The voltage gain is positive and **slightly less than 1** (typically 0.7 to 0.9 due to the body effect).\n\n*   **Input Resistance ($R_{\\text{in}}$):**\n    Looking into the gate of MOSFET $M_1$ at low to moderate frequencies, the impedance is purely capacitive and essentially infinite for DC/low-frequency signals.\n    *Result:* **$R_{\\text{in}} = \\infty$**\n\n*   **Output Resistance ($R_{\\text{out}}$):**\n    The output resistance is found by looking back into the output node ($V_{\\text{out}}$). It is the parallel combination of the resistance looking down into $M_2$ ($r_{o2}$) and looking up into the source of $M_1$ ($\\approx \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1}$).\n    $$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2}$$\n    Since $\\frac{1}{g_m}$ is much smaller than $r_o$, this simplifies to:\n    *Result:* **$R_{\\text{out}} \\approx \\frac{1}{g_{m1} + g_{mb1}}$** (This is a relatively low resistance).\n\n### 4. Summary of Applications\nBecause this circuit features a **high input resistance**, a **low output resistance**, and a **voltage gain of approximately 1**, it is primarily used as a **Voltage Buffer**.\n*   **Impedance Matching:** It is used to connect a high-impedance source to a low-impedance load without drawing current from the source or losing signal voltage.\n*   **Level Shifting:** It can be used to shift a DC voltage level down by $V_{GS}$ to make it compatible with subsequent stages in an integrated circuit.",
        "format": "markdown",
        "sha256": "f6e782ebc9eb920cd0898001d8c66b1a14955ecebcf91ba2f578bff0d1bf9ee1"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current-source load, and gives a positive gain slightly below unity. The gain and output-resistance expressions also match the expected model.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 7408,
        "total_tokens": 9628,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5215,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3693,
        "total_tokens": 4803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2636,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor Inverter). It is the most fundamental building block of digital logic circuits, acting as a logical **NOT gate**.\n\n### 2. Component Breakdown\nThe circuit consists of two transistors:\n*   **$M_2$ (Top Transistor):** This is a **PMOS** (P-channel MOSFET) transistor. You can identify it by the arrow on the source terminal pointing *inward* towards the gate. Its source is connected to the positive supply voltage ($V_{DD}$).\n*   **$M_1$ (Bottom Transistor):** This is an **NMOS** (N-channel MOSFET) transistor. You can identify it by the arrow on the source terminal pointing *outward* towards ground. Its source is connected to Ground (0V).\n\n**Connections:**\n*   The **gates** of both transistors are tied together to form the input terminal ($V_{in}$).\n*   The **drains** of both transistors are tied together to form the output terminal ($V_{out}$).\n\n### 3. Principle of Operation\nThe circuit operates by acting as a pair of complementary switches based on the input voltage ($V_{in}$).\n\n*   **Case 1: Input is Logic HIGH ($V_{in} \\approx V_{DD}$)**\n    *   The high voltage at the gate turns the bottom NMOS transistor ($M_1$) **ON**. It acts like a closed switch, creating a path from the output to ground.\n    *   The high voltage at the gate turns the top PMOS transistor ($M_2$) **OFF** (because the gate-to-source voltage is 0V). It acts like an open switch, disconnecting the output from $V_{DD}$.\n    *   **Result:** The output ($V_{out}$) is pulled down to Ground, resulting in a **Logic LOW**.\n\n*   **Case 2: Input is Logic LOW ($V_{in} \\approx 0V$)**\n    *   The low voltage at the gate turns the bottom NMOS transistor ($M_1$) **OFF**. It acts like an open switch, disconnecting the output from ground.\n    *   The low voltage at the gate turns the top PMOS transistor ($M_2$) **ON** (because the gate is at a lower potential than the source). It acts like a closed switch, creating a path from $V_{DD}$ to the output.\n    *   **Result:** The output ($V_{out}$) is pulled up to $V_{DD}$, resulting in a **Logic HIGH**.\n\n### 4. Truth Table\nThis behavior perfectly describes a logical inverter (NOT gate):\n\n| Input ($V_{in}$) | Output ($V_{out}$) |\n| :--- | :--- |\n| 0 (LOW) | 1 (HIGH) |\n| 1 (HIGH) | 0 (LOW) |\n\n### 5. Key Characteristics of this Circuit\n*   **Zero Static Power Dissipation:** In a steady state (either fully HIGH or fully LOW), one transistor is always OFF. Therefore, there is no direct path for current to flow from $V_{DD}$ to Ground, meaning it consumes almost zero power when not switching.\n*   **Full Rail-to-Rail Swing:** The output voltage can swing all the way up to exactly $V_{DD}$ and all the way down to exactly Ground, providing excellent noise margins.",
        "format": "markdown",
        "sha256": "8ad50284a51effd7285cf2d37059d12d85e57295a44f40402d776540e2ae1b57"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its PMOS pull-up and NMOS pull-down, and explains the complementary switching and output behavior.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 4941,
        "total_tokens": 7161,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3265,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2435,
        "total_tokens": 3545,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1676,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a standard **CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**. It is the most fundamental logic gate in digital electronics, acting as a **NOT gate**.\n\n### 2. Component Breakdown\n*   **$M_1$ (Bottom Transistor):** This is an **NMOS** (n-channel MOSFET) transistor. You can identify it by the arrow on the source terminal pointing outward (towards ground). It acts as the **pull-down network**.\n*   **$M_2$ (Top Transistor):** This is a **PMOS** (p-channel MOSFET) transistor. You can identify it by the arrow on the source terminal pointing inward (away from $V_{DD}$). It acts as the **pull-up network**.\n*   **$V_{\\text{in}}$:** The input voltage terminal. It is connected to the gates of both $M_1$ and $M_2$.\n*   **$V_{\\text{out}}$:** The output voltage terminal. It is connected to the drains of both $M_1$ and $M_2$.\n*   **$V_{DD}$:** The positive power supply voltage.\n*   **Ground (GND):** The 0V reference, indicated by the three horizontal lines at the bottom.\n\n### 3. Principle of Operation (Digital Logic)\nThe circuit operates by turning one transistor ON and the other OFF depending on the input voltage, thereby connecting the output to either $V_{DD}$ or Ground.\n\n*   **Case 1: Input is LOW (Logic 0, $V_{\\text{in}} \\approx 0\\text{V}$)**\n    *   **NMOS ($M_1$):** The gate-to-source voltage ($V_{GS}$) is $0\\text{V}$. Because this is below its threshold voltage, $M_1$ is **OFF** (acts like an open switch).\n    *   **PMOS ($M_2$):** The gate-to-source voltage ($V_{GS}$) is $0\\text{V} - V_{DD} = -V_{DD}$. Because this is a strong negative voltage (exceeding its threshold), $M_2$ is **ON** (acts like a closed switch).\n    *   **Result:** The output ($V_{\\text{out}}$) is connected directly to $V_{DD}$ through $M_2$. Therefore, **$V_{\\text{out}}$ is HIGH (Logic 1)**.\n\n*   **Case 2: Input is HIGH (Logic 1, $V_{\\text{in}} \\approx V_{DD}$)**\n    *   **NMOS ($M_1$):** The gate-to-source voltage ($V_{GS}$) is $V_{DD}$. Because this is above its threshold voltage, $M_1$ is **ON** (acts like a closed switch).\n    *   **PMOS ($M_2$):** The gate-to-source voltage ($V_{GS}$) is $V_{DD} - V_{DD} = 0\\text{V}$. Because this is below its threshold magnitude, $M_2$ is **OFF** (acts like an open switch).\n    *   **Result:** The output ($V_{\\text{out}}$) is connected directly to Ground through $M_1$. Therefore, **$V_{\\text{out}}$ is LOW (Logic 0)**.\n\n### 4. Key Characteristics of this Circuit\n*   **Logic Inversion:** As demonstrated above, it outputs the opposite logic state of the input.\n*   **Zero Static Power Dissipation:** In a steady state (when the input is solidly HIGH or solidly LOW), one of the transistors is always OFF. Therefore, there is no direct path for current to flow from $V_{DD}$ to Ground. Power is only consumed during the brief moment of switching when both transistors are partially ON.\n*   **Full Rail-to-Rail Swing:** The output voltage can reach exactly $V_{DD}$ and exactly $0\\text{V}$, providing excellent signal integrity and noise margins.\n*   **High Input Impedance:** Because the input is connected only to the insulated gates of the MOSFETs, the circuit draws virtually zero current from whatever is driving it.",
        "format": "markdown",
        "sha256": "bef9425ada81ca49f313850f8f157596fa080fd737951c190d429097f273ee3f"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and accurately describes its logic operation. The additional characteristics are consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 5300,
        "total_tokens": 7520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3393,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2555,
        "total_tokens": 3665,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a standard **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor Inverter). It is the most fundamental logic gate in digital electronics, functioning as a **NOT gate**.\n\n### 2. Component Breakdown\nThe circuit consists of two transistors:\n*   **$M_2$ (Top Transistor):** This is a **PMOS** (P-channel MOSFET) transistor. You can identify it by the arrow on its source terminal pointing inward towards the gate, and it is connected to the positive supply voltage ($V_{DD}$). It acts as the \"pull-up\" network.\n*   **$M_1$ (Bottom Transistor):** This is an **NMOS** (N-channel MOSFET) transistor. You can identify it by the arrow on its source terminal pointing outward, and it is connected to ground. It acts as the \"pull-down\" network.\n\n### 3. Circuit Connections\n*   **Input ($V_{in}$):** The gates of both transistors ($M_1$ and $M_2$) are tied together and connected to the input signal.\n*   **Output ($V_{out}$):** The drains of both transistors are tied together to form the output node.\n*   **Power ($V_{DD}$):** The source of the PMOS ($M_2$) is connected to the positive supply voltage.\n*   **Ground:** The source of the NMOS ($M_1$) is connected to ground (0V).\n\n### 4. Principle of Operation\nThe circuit operates by inverting the digital logic level of the input signal. Here is how it behaves in its two primary states:\n\n*   **Case 1: Input is Logic HIGH ($V_{in} \\approx V_{DD}$)**\n    *   The high voltage at the gate turns the bottom NMOS transistor ($M_1$) **ON**.\n    *   The high voltage at the gate (relative to its source at $V_{DD}$) turns the top PMOS transistor ($M_2$) **OFF**.\n    *   **Result:** The output ($V_{out}$) is pulled down to ground through $M_1$, while being disconnected from $V_{DD}$. Therefore, **$V_{out}$ becomes Logic LOW (0V)**.\n\n*   **Case 2: Input is Logic LOW ($V_{in} \\approx 0V$)**\n    *   The low voltage at the gate turns the bottom NMOS transistor ($M_1$) **OFF**.\n    *   The low voltage at the gate (relative to its source at $V_{DD}$) turns the top PMOS transistor ($M_2$) **ON**.\n    *   **Result:** The output ($V_{out}$) is pulled up to $V_{DD}$ through $M_2$, while being disconnected from ground. Therefore, **$V_{out}$ becomes Logic HIGH ($V_{DD}$)**.\n\n### Summary Truth Table\n| Input ($V_{in}$) | $M_2$ (PMOS) State | $M_1$ (NMOS) State | Output ($V_{out}$) |\n| :--- | :--- | :--- | :--- |\n| **LOW (0)** | ON | OFF | **HIGH (1)** |\n| **HIGH (1)** | OFF | ON | **LOW (0)** |\n\n### Key Characteristics\n*   **Low Static Power Consumption:** In a steady state (either HIGH or LOW), one of the transistors is always OFF. Therefore, ideally, no direct current flows from $V_{DD}$ to ground, resulting in near-zero static power dissipation.\n*   **Full Voltage Swing:** The output can swing fully from 0V to $V_{DD}$ (rail-to-rail).",
        "format": "markdown",
        "sha256": "cdd1949f88d32d556a24ec1a713fb8c3958b9d39f074f85995daf790a30a00d7"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and describes the connections and logic-level operation accurately. The golden solution gives full credit for this identification; additional small-signal analysis is not required.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 5082,
        "total_tokens": 7302,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3197,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2500,
        "total_tokens": 3610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1675,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit shown is a standard **CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**, also known as a logical **NOT gate**.\n\n### 2. Component Breakdown\nThe circuit consists of two MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) devices:\n*   **$M_1$ (Top Transistor):** This is a **PMOS** transistor. While it lacks the common \"bubble\" at the gate, the arrow on its terminal pointing *inwards* towards the channel is a standard convention to denote a PMOS device. It acts as the **pull-up network**, connecting the output to the positive supply voltage ($V_{DD}$).\n*   **$M_2$ (Bottom Transistor):** This is an **NMOS** transistor, indicated by the arrow on its source terminal pointing *outwards* towards ground. It acts as the **pull-down network**, connecting the output to ground (0V).\n\n### 3. Principle of Operation\nThe gates of both transistors are tied together to form the input ($V_{in}$), and their drains are tied together to form the output ($V_{out}$). The circuit operates in two primary states:\n\n*   **Case 1: Input is HIGH ($V_{in} \\approx V_{DD}$)**\n    *   The high voltage at the gate turns **ON** the NMOS transistor ($M_2$) because its gate-to-source voltage ($V_{GS}$) is positive and greater than its threshold voltage.\n    *   The high voltage at the gate turns **OFF** the PMOS transistor ($M_1$) because its gate-to-source voltage is approximately 0V (both gate and source are near $V_{DD}$).\n    *   **Result:** $M_2$ provides a low-resistance path to ground, pulling $V_{out}$ down to **0V (Logic LOW)**.\n\n*   **Case 2: Input is LOW ($V_{in} \\approx 0V$)**\n    *   The low voltage at the gate turns **OFF** the NMOS transistor ($M_2$) because its $V_{GS}$ is 0V.\n    *   The low voltage at the gate turns **ON** the PMOS transistor ($M_1$) because its gate is at 0V while its source is at $V_{DD}$, creating a strong negative gate-to-source voltage that exceeds its threshold.\n    *   **Result:** $M_1$ provides a low-resistance path to the supply voltage, pulling $V_{out}$ up to **$V_{DD}$ (Logic HIGH)**.\n\n### 4. Summary (Truth Table)\nThe circuit perfectly performs logical inversion:\n\n| Input ($V_{in}$) | Output ($V_{out}$) |\n| :--- | :--- |\n| LOW (0) | HIGH (1) |\n| HIGH (1) | LOW (0) |\n\n**Key Characteristic:** In either steady state (HIGH or LOW), one transistor is always OFF. This means there is no direct path for current to flow from $V_{DD}$ to ground, resulting in **near-zero static power dissipation**, which is the primary advantage of CMOS technology.",
        "format": "markdown",
        "sha256": "b1f5b255e94ff352688a130c6dc1bad4980d9e92d8a8b7cacdaa7c34eb3f9ca5"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper transistor as PMOS and analyzes the circuit as a standard CMOS inverter; both devices are NMOS, so the central topology and conclusion are wrong.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2200,
        "output_tokens": 20462,
        "total_tokens": 22662,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18942,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 9303,
        "total_tokens": 10403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8594,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a standard **CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**, also known as a **NOT gate**. It is a fundamental building block in digital logic design.\n\n### 2. Component Breakdown\nThe circuit consists of two MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) devices:\n*   **$M_1$ (Top Transistor):** This is a **PMOS** (p-channel MOSFET). In standard schematic conventions for this topology, the top transistor connected to the positive supply ($V_{DD}$) is a PMOS. The inward-pointing arrow on its symbol also indicates it is a p-channel device. It acts as the **pull-up** network.\n*   **$M_2$ (Bottom Transistor):** This is an **NMOS** (n-channel MOSFET). The transistor connected to ground is typically an NMOS. The outward-pointing arrow on its symbol indicates it is an n-channel device. It acts as the **pull-down** network.\n\n### 3. Circuit Connections\n*   **Input ($V_{in}$):** Connected to the gates of both $M_1$ and $M_2$.\n*   **Output ($V_{out}$):** Taken from the common node where the drains of $M_1$ and $M_2$ are connected together.\n*   **Power ($V_{DD}$):** Connected to the source of the PMOS transistor ($M_1$).\n*   **Ground:** Connected to the source of the NMOS transistor ($M_2$).\n\n### 4. Principle of Operation\nThe circuit operates by inverting the logical state of the input signal. Here is how it works for the two binary states:\n\n*   **Case 1: Input is HIGH ($V_{in} \\approx V_{DD}$)**\n    *   **$M_2$ (NMOS):** The gate-to-source voltage ($V_{gs}$) is high ($V_{DD}$). This turns the NMOS transistor **ON**, creating a low-resistance path from the output to ground.\n    *   **$M_1$ (PMOS):** The source-to-gate voltage ($V_{sg}$) is low ($V_{DD} - V_{DD} = 0V$). This turns the PMOS transistor **OFF**, disconnecting the output from $V_{DD}$.\n    *   **Result:** The output ($V_{out}$) is pulled down to ground. Therefore, **$V_{out}$ is LOW**.\n\n*   **Case 2: Input is LOW ($V_{in} \\approx 0V$)**\n    *   **$M_2$ (NMOS):** The gate-to-source voltage ($V_{gs}$) is low ($0V$). This turns the NMOS transistor **OFF**, disconnecting the output from ground.\n    *   **$M_1$ (PMOS):** The source-to-gate voltage ($V_{sg}$) is high ($V_{DD} - 0V = V_{DD}$). This turns the PMOS transistor **ON**, creating a low-resistance path from $V_{DD}$ to the output.\n    *   **Result:** The output ($V_{out}$) is pulled up to $V_{DD}$. Therefore, **$V_{out}$ is HIGH**.\n\n### 5. Summary (Truth Table)\nThe circuit performs the logical **NOT** operation.\n\n| Input ($V_{in}$) | Output ($V_{out}$) |\n| :---: | :---: |\n| LOW (0) | HIGH (1) |\n| HIGH (1) | LOW (0) |",
        "format": "markdown",
        "sha256": "3f635ea009ed4a32eb43cc3cd814c66fa491ba1ffccb2de7c006159232d328f2"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper transistor as PMOS and analyzes the circuit as a standard CMOS inverter. The figure has two NMOS devices, so the golden solution’s scoring gate assigns 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2200,
        "output_tokens": 23048,
        "total_tokens": 25248,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21258,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 11159,
        "total_tokens": 12259,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10348,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a standard **CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**, also known as a **NOT gate**. It is a fundamental building block in digital logic design.\n\n### 2. Component Breakdown\nThe circuit consists of two MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) devices:\n*   **$M_1$ (Top Transistor):** This is a **PMOS** (p-channel MOSFET). In standard schematic conventions for this topology, the top transistor connected to the positive supply ($V_{DD}$) is a PMOS. The inward-pointing arrow on its symbol also indicates it is a p-channel device. It acts as the **pull-up** network.\n*   **$M_2$ (Bottom Transistor):** This is an **NMOS** (n-channel MOSFET). The transistor connected to ground is typically an NMOS. The outward-pointing arrow on its symbol indicates it is an n-channel device. It acts as the **pull-down** network.\n\n### 3. Circuit Connections\n*   **Input ($V_{in}$):** Connected to the gates of both $M_1$ and $M_2$.\n*   **Output ($V_{out}$):** Taken from the common node where the drains of $M_1$ and $M_2$ are connected together.\n*   **Power ($V_{DD}$):** Connected to the source of the PMOS transistor ($M_1$).\n*   **Ground:** Connected to the source of the NMOS transistor ($M_2$).\n\n### 4. Principle of Operation\nThe circuit operates by inverting the logical state of the input signal. Here is how it works for the two binary states:\n\n*   **Case 1: Input is HIGH ($V_{in} \\approx V_{DD}$)**\n    *   **$M_2$ (NMOS):** The gate-to-source voltage ($V_{gs}$) is high ($V_{DD}$). This turns the NMOS transistor **ON**, creating a low-resistance path from the output to ground.\n    *   **$M_1$ (PMOS):** The source-to-gate voltage ($V_{sg}$) is low ($V_{DD} - V_{DD} = 0V$). This turns the PMOS transistor **OFF**, disconnecting the output from $V_{DD}$.\n    *   **Result:** The output ($V_{out}$) is pulled down to ground. Therefore, **$V_{out}$ is LOW**.\n\n*   **Case 2: Input is LOW ($V_{in} \\approx 0V$)**\n    *   **$M_2$ (NMOS):** The gate-to-source voltage ($V_{gs}$) is low ($0V$). This turns the NMOS transistor **OFF**, disconnecting the output from ground.\n    *   **$M_1$ (PMOS):** The source-to-gate voltage ($V_{sg}$) is high ($V_{DD} - 0V = V_{DD}$). This turns the PMOS transistor **ON**, creating a low-resistance path from $V_{DD}$ to the output.\n    *   **Result:** The output ($V_{out}$) is pulled up to $V_{DD}$. Therefore, **$V_{out}$ is HIGH**.\n\n### 5. Summary (Truth Table)\nThe circuit performs the logical **NOT** operation.\n\n| Input ($V_{in}$) | Output ($V_{out}$) |\n| :---: | :---: |\n| LOW (0) | HIGH (1) |\n| HIGH (1) | LOW (0) |",
        "format": "markdown",
        "sha256": "3f635ea009ed4a32eb43cc3cd814c66fa491ba1ffccb2de7c006159232d328f2"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper transistor as PMOS and analyzes the circuit as a standard CMOS inverter. The figure has two NMOS devices, so the golden solution’s scoring gate assigns 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2200,
        "output_tokens": 19235,
        "total_tokens": 21435,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17584,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 11159,
        "total_tokens": 12259,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10348,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification\nThis circuit is a **Common-Source (CS) Amplifier with a Diode-Connected Active Load**.\n*   **$M_1$ (Bottom Transistor):** This is an **NMOS** transistor. It acts as the input driver or amplifying device. The input signal ($V_{in}$) is applied to its gate, and the output ($V_{out}$) is taken from its drain.\n*   **$M_2$ (Top Transistor):** This is a **PMOS** transistor. Its gate is shorted to its drain. This specific configuration is known as a \"diode-connected\" transistor. It acts as an active load (a replacement for a traditional resistor) for the amplifier.\n\n### 2. DC Operating Principles\nFor this circuit to operate as a linear amplifier, both transistors must be biased correctly:\n*   **$M_2$ (Load):** Because the gate and drain are shorted together ($V_G = V_D$), the drain-to-source voltage ($V_{DS}$) is always equal to the gate-to-source voltage ($V_{GS}$). The condition for a MOSFET to be in saturation is $|V_{DS}| \\ge |V_{GS}| - |V_{TH}|$. Since $|V_{DS}| = |V_{GS}|$, this condition is always satisfied. Therefore, **a diode-connected transistor is always in the saturation region** (assuming it is turned on).\n*   **$M_1$ (Amplifier):** The DC bias voltage at $V_{in}$ must be set such that $M_1$ is also in the saturation region ($V_{DS1} \\ge V_{GS1} - V_{TH1}$) to provide high gain and linear amplification.\n\n### 3. Small-Signal Analysis (AC Analysis)\nTo understand how the circuit amplifies AC signals, we look at its small-signal equivalent.\n\n**a) Impedance of the Load ($M_2$)**\nA diode-connected transistor acts like a small-signal resistor. Looking into the drain of $M_2$, the small-signal resistance is the parallel combination of its transconductance inverse and its output resistance:\n$$R_{load} = \\frac{1}{g_{m2}} \\parallel r_{o2}$$\nBecause $\\frac{1}{g_{m2}}$ is typically much smaller than $r_{o2}$, the load resistance is approximately:\n$$R_{load} \\approx \\frac{1}{g_{m2}}$$\n\n**b) Voltage Gain ($A_v$)**\nThe voltage gain of a common-source amplifier is given by the transconductance of the input transistor multiplied by the total resistance at the output node.\n*   The total output resistance ($R_{out}$) is the parallel combination of $M_1$'s output resistance ($r_{o1}$) and the load resistance ($R_{load}$):\n    $$R_{out} = r_{o1} \\parallel \\left(\\frac{1}{g_{m2}} \\parallel r_{o2}\\right)$$\n*   The voltage gain is:\n    $$A_v = -g_{m1} \\cdot R_{out} = -g_{m1} \\left( r_{o1} \\parallel \\frac{1}{g_{m2}} \\parallel r_{o2} \\right)$$\n*   Using the approximation that $\\frac{1}{g_{m2}}$ dominates (is the smallest resistance), the gain simplifies to:\n    $$A_v \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\n**c) Gain determined by Geometry**\nIf we substitute the standard equation for transconductance ($g_m = \\sqrt{2 \\mu C_{ox} \\frac{W}{L} I_D}$) into the simplified gain formula, noting that both transistors share the same DC drain current ($I_D$), we get:\n$$A_v \\approx -\\frac{\\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 I_D}}{\\sqrt{2 \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 I_D}}$$\n$$A_v \\approx -\\sqrt{\\frac{\\mu_n \\left(\\frac{W}{L}\\right)_1}{\\mu_p \\left(\\frac{W}{L}\\right)_2}}$$\n*Where $\\mu_n$ and $\\mu_p$ are the electron and hole mobilities, and $W/L$ is the width-to-length ratio of the respective transistors.*\n\n### 4. Key Characteristics Summary\n*   **Voltage Gain:** Relatively low to moderate. Because the gain is determined by the ratio of the square roots of the device geometries, achieving high gain requires making $M_1$ very large and $M_2$ very small, which is often impractical.\n*   **Input Resistance ($R_{in}$):** Infinite at low frequencies (ideal MOSFET gate).\n*   **Output Resistance ($R_{out}$):** Relatively low ($R_{out} \\approx 1/g_{m2}$).\n*   **Inverting:** The negative sign in the gain equation indicates that the output signal is 180 degrees out of phase with the input signal.\n*   **Advantage:** The gain is relatively independent of the bias current ($I_D$) and temperature, making it a very stable, predictable amplifier stage often used in integrated circuits where precise resistor values are hard to fabricate.",
        "format": "markdown",
        "sha256": "e7d85b9213fc8c64f658073129588061421444c98938f0ac502a34fe9133aab4"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain as −gm1/gm2, with a consistent channel-length-modulation form including both output resistances. Minor ancillary claims do not affect the essential analysis.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2200,
        "output_tokens": 8421,
        "total_tokens": 10621,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6025,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 3980,
        "total_tokens": 5080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2775,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Source (CS) Amplifier with a Diode-Connected Active Load**.\n*   **$M_1$ (Bottom Transistor):** This is an **NMOS** transistor (indicated by the arrow pointing outward at the source). It acts as the input driver or amplifying device. Its source is grounded, making it a \"common-source\" configuration.\n*   **$M_2$ (Top Transistor):** This is a **PMOS** transistor (indicated by the arrow pointing inward at the source, which is connected to $V_{DD}$). Its gate is shorted to its drain. This specific configuration is known as a **\"diode-connected\"** transistor. It serves as the active load for the amplifier.\n\n### 2. DC Analysis (Large Signal Operation)\nFor the circuit to operate as a linear amplifier, the input transistor $M_1$ must be biased in the **saturation region**.\n*   **$M_2$ Operation:** Because the gate and drain of $M_2$ are shorted together, $V_{DS2} = V_{GS2}$. The condition for a PMOS to be in saturation is $|V_{DS}| \\geq |V_{GS}| - |V_{thp}|$. Since $|V_{DS2}|$ is exactly equal to $|V_{GS2}|$, this condition is always satisfied (as long as the transistor is turned on, i.e., $|V_{GS2}| > |V_{thp}|$). Therefore, a diode-connected transistor is **always in saturation**.\n*   **Current:** The same DC drain current ($I_D$) flows through both $M_1$ and $M_2$ (assuming no DC current is drawn from the $V_{out}$ terminal).\n\n### 3. AC Analysis (Small Signal Operation)\nTo find the voltage gain of this amplifier, we look at the small-signal equivalent circuit.\n\n*   **Equivalent Resistance of the Load ($M_2$):**\n    A diode-connected transistor acts like a two-terminal resistor in a small-signal model. The small-signal resistance looking into the drain of $M_2$ is approximately:\n    $$R_{load} = \\frac{1}{g_{m2}} \\parallel r_{o2}$$\n    Where $g_{m2}$ is the transconductance of $M_2$ and $r_{o2}$ is its output resistance. Since typically $\\frac{1}{g_{m2}} \\ll r_{o2}$, the load resistance is often approximated simply as **$\\frac{1}{g_{m2}}$**.\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain of a common-source amplifier is generally given by $A_v = -g_{m1} \\times R_{out\\_total}$.\n    The total output resistance at the $V_{out}$ node is the parallel combination of the output resistance of $M_1$ ($r_{o1}$) and the equivalent resistance of the load ($M_2$).\n    $$A_v = -g_{m1} \\left( r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}} \\right)$$\n    Using the approximation that $\\frac{1}{g_{m2}}$ is much smaller than $r_{o1}$ and $r_{o2}$, the gain simplifies to:\n    $$A_v \\approx -g_{m1} \\left( \\frac{1}{g_{m2}} \\right) = -\\frac{g_{m1}}{g_{m2}}$$\n\n### 4. Key Characteristics and Design Insights\nIf we expand the transconductance terms ($g_m = \\sqrt{2 \\mu C_{ox} \\frac{W}{L} I_D}$), the simplified gain equation becomes:\n$$A_v \\approx -\\frac{\\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 I_D}}{\\sqrt{2 \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 I_D}}$$\n\nSince the bias current $I_D$ is the same for both transistors, it cancels out, leaving:\n$$A_v \\approx -\\sqrt{\\frac{\\mu_n \\left(\\frac{W}{L}\\right)_1}{\\mu_p \\left(\\frac{W}{L}\\right)_2}}$$\n\n**Summary of Features:**\n*   **Moderate Gain:** The gain is determined by the ratio of the physical dimensions (Width/Length) of the two transistors. It is typically lower than an amplifier using a current-source load.\n*   **Linearity:** Because the gain is primarily dependent on device geometries rather than the bias current, this amplifier exhibits relatively good linearity over a range of input voltages.\n*   **Process/Temperature Stability:** The gain is a ratio of similar parameters. Variations in temperature or manufacturing processes tend to affect both transistors similarly, meaning the *ratio* (and thus the gain) remains relatively stable.\n*   **IC Friendly:** Using a transistor as a load ($M_2$) takes up significantly less physical space on a silicon chip than a passive resistor would, making it standard practice in Integrated Circuit (IC) design.",
        "format": "markdown",
        "sha256": "c6b217fc570f38c061f48ae5d19ae63c58e2adcfe2d9a8d588e432983191cd9e"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both output resistances, as well as the usual −gm1/gm2 approximation. The extra design commentary does not alter the essential correct analysis.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2200,
        "output_tokens": 8465,
        "total_tokens": 10665,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6101,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 4776,
        "total_tokens": 5876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3615,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification\nThis circuit is a **Common-Source (CS) Amplifier with a Diode-Connected Active Load**.\n*   **$M_1$ (Bottom Transistor):** This is an **NMOS** transistor (indicated by the arrow pointing outward at the source). It acts as the input driver or amplifying device. Its source is grounded, making it a \"common-source\" configuration.\n*   **$M_2$ (Top Transistor):** This is a **PMOS** transistor (indicated by the arrow pointing inward at the source). Its gate is shorted to its drain. This specific configuration is known as a **\"diode-connected\"** transistor. It acts as an active load for $M_1$.\n\n### 2. Operation of the Diode-Connected Load ($M_2$)\nThe connection between the gate and drain of $M_2$ forces it to operate in a specific way:\n*   For a PMOS to be in the saturation region, the condition is $V_{SD} > V_{SG} - |V_{thp}|$.\n*   Because the gate and drain are tied together, $V_G = V_D$.\n*   Therefore, $V_{SD} = V_S - V_D$ and $V_{SG} = V_S - V_G$. Since $V_G = V_D$, it means $V_{SD} = V_{SG}$.\n*   Substituting this into the saturation condition: $V_{SG} > V_{SG} - |V_{thp}| \\Rightarrow 0 > -|V_{thp}|$.\n*   Since the threshold voltage magnitude $|V_{thp}|$ is always positive, this condition is **always satisfied**.\n*   **Conclusion:** As long as $M_2$ is turned on (conducting current), it is **always operating in the saturation region**. It acts as a non-linear resistor with a small-signal resistance of approximately $\\frac{1}{g_{m2}}$.\n\n### 3. Small-Signal Analysis (Voltage Gain)\nTo find the voltage gain ($A_v = \\frac{v_{out}}{v_{in}}$), we look at the small-signal equivalent circuit.\nThe general gain for a common-source amplifier is:\n$$A_v = -g_{m1} \\cdot R_{out}$$\nWhere:\n*   $g_{m1}$ is the transconductance of the input transistor $M_1$.\n*   $R_{out}$ is the total resistance seen at the output node.\n\nLooking at the output node ($V_{out}$):\n*   Looking down into $M_1$, we see its output resistance, $r_{o1}$.\n*   Looking up into $M_2$, we see the resistance of a diode-connected device, which is $\\frac{1}{g_{m2}} \\parallel r_{o2}$.\n*   Therefore, $R_{out} = r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}}$.\n\nIn most practical cases, $\\frac{1}{g_{m2}}$ is much smaller than $r_{o1}$ and $r_{o2}$. Therefore, we can approximate the output resistance as:\n$$R_{out} \\approx \\frac{1}{g_{m2}}$$\n\nSubstituting this back into the gain equation gives:\n$$A_v \\approx -g_{m1} \\left( \\frac{1}{g_{m2}} \\right) = -\\frac{g_{m1}}{g_{m2}}$$\n\nWe can expand this using the saturation region transconductance formula ($g_m = \\sqrt{2 \\mu C_{ox} \\frac{W}{L} I_D}$):\n$$A_v \\approx -\\frac{\\sqrt{2 \\mu_n C_{ox} (\\frac{W}{L})_1 I_D}}{\\sqrt{2 \\mu_p C_{ox} (\\frac{W}{L})_2 I_D}}$$\n\nSince $M_1$ and $M_2$ are in series, they share the same DC bias current ($I_D$). The current terms cancel out:\n$$A_v \\approx -\\sqrt{\\frac{\\mu_n (\\frac{W}{L})_1}{\\mu_p (\\frac{W}{L})_2}}$$\n\n### 4. Key Characteristics\n*   **Gain depends on geometry:** As shown in the final equation, the voltage gain is determined primarily by the physical dimensions (Width/Length ratios) of the two transistors and the mobility of electrons ($\\mu_n$) vs. holes ($\\mu_p$).\n*   **Relatively Low Gain:** Because the load resistance ($\\frac{1}{g_{m2}}$) is relatively small compared to a current source load, this amplifier topology provides a moderate/low voltage gain (typically in the range of 2 to 10 V/V).\n*   **Good Linearity:** Because the gain equation is largely independent of the bias current $I_D$, the gain remains relatively constant even as the signal swings, resulting in better linearity compared to amplifiers with resistive loads.\n*   **Inverting Amplifier:** The negative sign in the gain equation indicates that the output signal is 180 degrees out of phase with the input signal. As $V_{in}$ goes up, $V_{out}$ goes down.",
        "format": "markdown",
        "sha256": "1f78e18209faafe1c059d2838d8f11dca8bb12b0cfb86234bb75995e5d31f814"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain −gm1/gm2, along with a consistent channel-length-modulation form. This satisfies the full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2200,
        "output_tokens": 7218,
        "total_tokens": 9418,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4945,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 3697,
        "total_tokens": 4797,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2513,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic provided, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is an **NMOS Source Follower** (also known as a **Common-Drain Amplifier**) with an **active current-source load**.\n\n*   **$M_2$ (Top Transistor):** This is the amplifying device. The input signal ($V_{in}$) is applied to its gate, and the output ($V_{out}$) is taken from its source. Its drain is connected to the positive supply ($V_{DD}$).\n*   **$M_1$ (Bottom Transistor):** This acts as the active load. Its drain is connected to the output node, and its source is grounded. Crucially, its gate is also grounded ($V_{GS1} = 0V$).\n\n**Important Assumption regarding $M_1$:**\nFor this circuit to function as a useful amplifier, **$M_1$ must be a depletion-mode NMOS transistor** (meaning it has a negative threshold voltage, $V_{th1} < 0$).\n*   If $M_1$ were a standard enhancement-mode NMOS, a gate-to-source voltage of 0V would mean it is completely turned OFF, and no bias current could flow, rendering the circuit non-functional.\n*   As a depletion-mode device with $V_{GS} = 0V$, $M_1$ remains ON and acts as a relatively constant current source ($I_{DSS}$) to bias $M_2$.\n\n**Substrate/Bulk Connection:**\nNotice the arrows on the middle terminal of both transistor symbols. They point inwards, confirming they are NMOS devices. Furthermore, the line connects this bulk terminal directly to the source terminal for both $M_1$ and $M_2$. This means $V_{BS} = 0$ for both transistors, so **there is no body effect** to consider in our analysis.\n\n---\n\n### 2. DC (Large-Signal) Analysis\nThe primary purpose of the DC analysis is to find the relationship between the input and output voltages.\n\n1.  **Bias Current:** Assuming $M_1$ is in saturation, it provides a constant bias current $I_{bias}$ to the circuit.\n    $$I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{GS1} - V_{th1})^2$$\n    Since $V_{GS1} = 0$:\n    $$I_{bias} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (-V_{th1})^2$$\n\n2.  **Output Voltage:** Transistor $M_2$ must conduct this same current ($I_{D2} = I_{bias}$). Assuming $M_2$ is also in saturation:\n    $$I_{bias} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{GS2} - V_{th2})^2$$\n    We can rearrange this to solve for the required gate-to-source voltage of $M_2$:\n    $$V_{GS2} = V_{th2} + \\sqrt{\\frac{2 I_{bias}}{\\mu_n C_{ox} (W/L)_2}}$$\n    Because $I_{bias}$ is constant, $V_{GS2}$ is a constant value.\n\n3.  **Transfer Characteristic:** By definition, $V_{GS2} = V_{in} - V_{out}$. Therefore:\n    $$V_{out} = V_{in} - V_{GS2}$$\n    **Conclusion:** The output voltage perfectly follows the input voltage, but is shifted down by a constant DC value ($V_{GS2}$). This is why it is called a \"source follower\" and is often used as a **level shifter**.\n\n---\n\n### 3. AC (Small-Signal) Analysis\nTo understand how the circuit handles AC signals, we look at its small-signal parameters: voltage gain and output resistance.\n\n*   **$M_2$** acts as a voltage-controlled current source with transconductance $g_{m2}$ and output resistance $r_{o2}$.\n*   **$M_1$** acts simply as a resistor $r_{o1}$ because its AC gate-to-source voltage is zero ($v_{gs1} = 0$, so $g_{m1}v_{gs1} = 0$).\n\n**Voltage Gain ($A_v$):**\nIf we apply a small AC signal $v_{in}$, the AC output voltage $v_{out}$ is determined by the current from $M_2$ flowing into the total resistance at the output node.\n*   Current from $M_2$: $i_s = g_{m2} v_{gs2} = g_{m2}(v_{in} - v_{out})$\n*   Total resistance at output node to ground: $R_{L} = r_{o1} \\parallel r_{o2}$\n\nApplying Kirchhoff's Current Law at the output node:\n$$g_{m2}(v_{in} - v_{out}) = \\frac{v_{out}}{r_{o1} \\parallel r_{o2}}$$\nSolving for the gain $A_v = \\frac{v_{out}}{v_{in}}$:\n$$A_v = \\frac{g_{m2} (r_{o1} \\parallel r_{o2})}{1 + g_{m2} (r_{o1} \\parallel r_{o2})}$$\nBecause $g_{m2} (r_{o1} \\parallel r_{o2})$ is typically much larger than 1, the voltage gain is **slightly less than, but very close to, 1** ($A_v \\approx 1$).\n\n**Output Resistance ($R_{out}$):**\nThe output resistance is the resistance looking back into the output terminal with the input grounded ($v_{in} = 0$).\nLooking into the source of $M_2$, we see a resistance of $1/g_{m2}$. This is in parallel with the output resistances of both transistors.\n$$R_{out} = \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2}$$\nSince $1/g_{m2}$ is usually much smaller than $r_{o1}$ or $r_{o2}$, the output resistance is approximately:\n$$R_{out} \\approx \\frac{1}{g_{m2}}$$\nThis is a **very low output resistance**.\n\n---\n\n### Summary of Circuit Characteristics\n*   **Function:** Voltage Buffer / Level Shifter\n*   **Voltage Gain:** $\\approx 1$ (Unity gain)\n*   **Input Impedance:** Infinite (ideal MOSFET gate)\n*   **Output Impedance:** Low ($\\approx 1/g_{m2}$)\n*   **Application:** Used to drive low-impedance loads without drawing current from the preceding stage, or to shift a DC voltage level down.",
        "format": "markdown",
        "sha256": "71539bb9a0cce0a2be8170c20a4d10005a701b146c30364b691c8811e0a52fdb"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology and both device roles: the circuit uses two PMOS devices, with M2 as a common-source input device and M1 as a diode-connected PMOS load, not an NMOS source follower with a depletion-mode current-source load. Its unity-gain analysis therefore does not apply.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2162,
        "output_tokens": 11020,
        "total_tokens": 13182,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8233,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 5929,
        "total_tokens": 7010,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4374,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic provided, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is an **NMOS Source Follower** (also known as a **Common-Drain Amplifier**) with an **active current-source load**.\n\n*   **$M_2$ (Top Transistor):** This is the amplifying device. The input signal ($V_{in}$) is applied to its gate, and the output ($V_{out}$) is taken from its source. Its drain is connected to the positive supply ($V_{DD}$).\n*   **$M_1$ (Bottom Transistor):** This acts as the active load. Its drain is connected to the output node, and its source is grounded. Crucially, its gate is also grounded ($V_{GS1} = 0V$).\n\n**Important Assumption regarding $M_1$:**\nFor this circuit to function as a useful amplifier, **$M_1$ must be a depletion-mode NMOS transistor** (meaning it has a negative threshold voltage, $V_{th1} < 0$).\n*   If $M_1$ were a standard enhancement-mode NMOS, a gate-to-source voltage of 0V would mean it is completely turned OFF, and no bias current could flow, rendering the circuit non-functional.\n*   As a depletion-mode device with $V_{GS} = 0V$, $M_1$ remains ON and acts as a relatively constant current source ($I_{DSS}$) to bias $M_2$.\n\n**Substrate/Bulk Connection:**\nNotice the arrows on the middle terminal of both transistor symbols. They point inwards, confirming they are NMOS devices. Furthermore, the line connects this bulk terminal directly to the source terminal for both $M_1$ and $M_2$. This means $V_{BS} = 0$ for both transistors, so **there is no body effect** to consider in our analysis.\n\n---\n\n### 2. DC (Large-Signal) Analysis\nThe primary purpose of the DC analysis is to find the relationship between the input and output voltages.\n\n1.  **Bias Current:** Assuming $M_1$ is in saturation, it provides a constant bias current $I_{bias}$ to the circuit.\n    $$I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{GS1} - V_{th1})^2$$\n    Since $V_{GS1} = 0$:\n    $$I_{bias} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (-V_{th1})^2$$\n\n2.  **Output Voltage:** Transistor $M_2$ must conduct this same current ($I_{D2} = I_{bias}$). Assuming $M_2$ is also in saturation:\n    $$I_{bias} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{GS2} - V_{th2})^2$$\n    We can rearrange this to solve for the required gate-to-source voltage of $M_2$:\n    $$V_{GS2} = V_{th2} + \\sqrt{\\frac{2 I_{bias}}{\\mu_n C_{ox} (W/L)_2}}$$\n    Because $I_{bias}$ is constant, $V_{GS2}$ is a constant value.\n\n3.  **Transfer Characteristic:** By definition, $V_{GS2} = V_{in} - V_{out}$. Therefore:\n    $$V_{out} = V_{in} - V_{GS2}$$\n    **Conclusion:** The output voltage perfectly follows the input voltage, but is shifted down by a constant DC value ($V_{GS2}$). This is why it is called a \"source follower\" and is often used as a **level shifter**.\n\n---\n\n### 3. AC (Small-Signal) Analysis\nTo understand how the circuit handles AC signals, we look at its small-signal parameters: voltage gain and output resistance.\n\n*   **$M_2$** acts as a voltage-controlled current source with transconductance $g_{m2}$ and output resistance $r_{o2}$.\n*   **$M_1$** acts simply as a resistor $r_{o1}$ because its AC gate-to-source voltage is zero ($v_{gs1} = 0$, so $g_{m1}v_{gs1} = 0$).\n\n**Voltage Gain ($A_v$):**\nIf we apply a small AC signal $v_{in}$, the AC output voltage $v_{out}$ is determined by the current from $M_2$ flowing into the total resistance at the output node.\n*   Current from $M_2$: $i_s = g_{m2} v_{gs2} = g_{m2}(v_{in} - v_{out})$\n*   Total resistance at output node to ground: $R_{L} = r_{o1} \\parallel r_{o2}$\n\nApplying Kirchhoff's Current Law at the output node:\n$$g_{m2}(v_{in} - v_{out}) = \\frac{v_{out}}{r_{o1} \\parallel r_{o2}}$$\nSolving for the gain $A_v = \\frac{v_{out}}{v_{in}}$:\n$$A_v = \\frac{g_{m2} (r_{o1} \\parallel r_{o2})}{1 + g_{m2} (r_{o1} \\parallel r_{o2})}$$\nBecause $g_{m2} (r_{o1} \\parallel r_{o2})$ is typically much larger than 1, the voltage gain is **slightly less than, but very close to, 1** ($A_v \\approx 1$).\n\n**Output Resistance ($R_{out}$):**\nThe output resistance is the resistance looking back into the output terminal with the input grounded ($v_{in} = 0$).\nLooking into the source of $M_2$, we see a resistance of $1/g_{m2}$. This is in parallel with the output resistances of both transistors.\n$$R_{out} = \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2}$$\nSince $1/g_{m2}$ is usually much smaller than $r_{o1}$ or $r_{o2}$, the output resistance is approximately:\n$$R_{out} \\approx \\frac{1}{g_{m2}}$$\nThis is a **very low output resistance**.\n\n---\n\n### Summary of Circuit Characteristics\n*   **Function:** Voltage Buffer / Level Shifter\n*   **Voltage Gain:** $\\approx 1$ (Unity gain)\n*   **Input Impedance:** Infinite (ideal MOSFET gate)\n*   **Output Impedance:** Low ($\\approx 1/g_{m2}$)\n*   **Application:** Used to drive low-impedance loads without drawing current from the preceding stage, or to shift a DC voltage level down.",
        "format": "markdown",
        "sha256": "71539bb9a0cce0a2be8170c20a4d10005a701b146c30364b691c8811e0a52fdb"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology and both device roles: the circuit uses two PMOS devices, with M2 as a common-source input device and M1 as a diode-connected PMOS load, not an NMOS source follower with a depletion-mode current-source load. Its unity-gain analysis therefore does not apply.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2162,
        "output_tokens": 11858,
        "total_tokens": 14020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8748,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 5929,
        "total_tokens": 7010,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4374,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic provided, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is an **NMOS Source Follower** (also known as a **Common-Drain Amplifier**) with an **active current-source load**.\n\n*   **$M_2$ (Top Transistor):** This is the amplifying device. The input signal ($V_{in}$) is applied to its gate, and the output ($V_{out}$) is taken from its source. Its drain is connected to the positive supply ($V_{DD}$).\n*   **$M_1$ (Bottom Transistor):** This acts as the active load. Its drain is connected to the output node, and its source is grounded. Crucially, its gate is also grounded ($V_{GS1} = 0V$).\n\n**Important Assumption regarding $M_1$:**\nFor this circuit to function as a useful amplifier, **$M_1$ must be a depletion-mode NMOS transistor** (meaning it has a negative threshold voltage, $V_{th1} < 0$).\n*   If $M_1$ were a standard enhancement-mode NMOS, a gate-to-source voltage of 0V would mean it is completely turned OFF, and no bias current could flow, rendering the circuit non-functional.\n*   As a depletion-mode device with $V_{GS} = 0V$, $M_1$ remains ON and acts as a relatively constant current source ($I_{DSS}$) to bias $M_2$.\n\n**Substrate/Bulk Connection:**\nNotice the arrows on the middle terminal of both transistor symbols. They point inwards, confirming they are NMOS devices. Furthermore, the line connects this bulk terminal directly to the source terminal for both $M_1$ and $M_2$. This means $V_{BS} = 0$ for both transistors, so **there is no body effect** to consider in our analysis.\n\n---\n\n### 2. DC (Large-Signal) Analysis\nThe primary purpose of the DC analysis is to find the relationship between the input and output voltages.\n\n1.  **Bias Current:** Assuming $M_1$ is in saturation, it provides a constant bias current $I_{bias}$ to the circuit.\n    $$I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{GS1} - V_{th1})^2$$\n    Since $V_{GS1} = 0$:\n    $$I_{bias} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (-V_{th1})^2$$\n\n2.  **Output Voltage:** Transistor $M_2$ must conduct this same current ($I_{D2} = I_{bias}$). Assuming $M_2$ is also in saturation:\n    $$I_{bias} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{GS2} - V_{th2})^2$$\n    We can rearrange this to solve for the required gate-to-source voltage of $M_2$:\n    $$V_{GS2} = V_{th2} + \\sqrt{\\frac{2 I_{bias}}{\\mu_n C_{ox} (W/L)_2}}$$\n    Because $I_{bias}$ is constant, $V_{GS2}$ is a constant value.\n\n3.  **Transfer Characteristic:** By definition, $V_{GS2} = V_{in} - V_{out}$. Therefore:\n    $$V_{out} = V_{in} - V_{GS2}$$\n    **Conclusion:** The output voltage perfectly follows the input voltage, but is shifted down by a constant DC value ($V_{GS2}$). This is why it is called a \"source follower\" and is often used as a **level shifter**.\n\n---\n\n### 3. AC (Small-Signal) Analysis\nTo understand how the circuit handles AC signals, we look at its small-signal parameters: voltage gain and output resistance.\n\n*   **$M_2$** acts as a voltage-controlled current source with transconductance $g_{m2}$ and output resistance $r_{o2}$.\n*   **$M_1$** acts simply as a resistor $r_{o1}$ because its AC gate-to-source voltage is zero ($v_{gs1} = 0$, so $g_{m1}v_{gs1} = 0$).\n\n**Voltage Gain ($A_v$):**\nIf we apply a small AC signal $v_{in}$, the AC output voltage $v_{out}$ is determined by the current from $M_2$ flowing into the total resistance at the output node.\n*   Current from $M_2$: $i_s = g_{m2} v_{gs2} = g_{m2}(v_{in} - v_{out})$\n*   Total resistance at output node to ground: $R_{L} = r_{o1} \\parallel r_{o2}$\n\nApplying Kirchhoff's Current Law at the output node:\n$$g_{m2}(v_{in} - v_{out}) = \\frac{v_{out}}{r_{o1} \\parallel r_{o2}}$$\nSolving for the gain $A_v = \\frac{v_{out}}{v_{in}}$:\n$$A_v = \\frac{g_{m2} (r_{o1} \\parallel r_{o2})}{1 + g_{m2} (r_{o1} \\parallel r_{o2})}$$\nBecause $g_{m2} (r_{o1} \\parallel r_{o2})$ is typically much larger than 1, the voltage gain is **slightly less than, but very close to, 1** ($A_v \\approx 1$).\n\n**Output Resistance ($R_{out}$):**\nThe output resistance is the resistance looking back into the output terminal with the input grounded ($v_{in} = 0$).\nLooking into the source of $M_2$, we see a resistance of $1/g_{m2}$. This is in parallel with the output resistances of both transistors.\n$$R_{out} = \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2}$$\nSince $1/g_{m2}$ is usually much smaller than $r_{o1}$ or $r_{o2}$, the output resistance is approximately:\n$$R_{out} \\approx \\frac{1}{g_{m2}}$$\nThis is a **very low output resistance**.\n\n---\n\n### Summary of Circuit Characteristics\n*   **Function:** Voltage Buffer / Level Shifter\n*   **Voltage Gain:** $\\approx 1$ (Unity gain)\n*   **Input Impedance:** Infinite (ideal MOSFET gate)\n*   **Output Impedance:** Low ($\\approx 1/g_{m2}$)\n*   **Application:** Used to drive low-impedance loads without drawing current from the preceding stage, or to shift a DC voltage level down.",
        "format": "markdown",
        "sha256": "71539bb9a0cce0a2be8170c20a4d10005a701b146c30364b691c8811e0a52fdb"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology and both device roles: the circuit uses two PMOS devices, with M2 as a common-source input device and M1 as a diode-connected PMOS load, not an NMOS source follower with a depletion-mode current-source load. Its unity-gain analysis therefore does not apply.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2162,
        "output_tokens": 11610,
        "total_tokens": 13772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8585,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 5929,
        "total_tokens": 7010,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4374,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the small-signal output resistance $R_{out}$ of the given circuit, we need to analyze its small-signal equivalent model.\n\n**1. Identify the Circuit Configuration**\nThe circuit consists of two PMOS transistors, $M_1$ and $M_2$, connected in a cascode configuration.\n*   $M_2$ acts as a current source (or active load) with its source connected to $V_{DD}$ and its gate biased at $V_{b2}$.\n*   $M_1$ is the cascode transistor with its gate biased at $V_{b1}$.\n*   We are looking into the drain of $M_1$ to find $R_{out}$.\n\n**2. Small-Signal Analysis Setup**\nTo find the small-signal output resistance, we turn off all independent DC sources:\n*   The DC supply voltage $V_{DD}$ becomes an AC ground.\n*   The DC bias voltages $V_{b1}$ and $V_{b2}$ become AC grounds.\n\n**3. Determine the Resistance at Node X**\nFirst, let's find the equivalent resistance looking up into the drain of $M_2$ from node X.\n*   For transistor $M_2$, both its gate (connected to $V_{b2}$) and its source (connected to $V_{DD}$) are at AC ground.\n*   Because the AC gate-to-source voltage $v_{gs2} = 0$, the dependent current source $g_{m2}v_{gs2}$ is zero.\n*   The only remaining small-signal parameter for $M_2$ is its output resistance $r_{o2}$.\n*   Therefore, the resistance looking up from node X is simply:\n    $$R_X = r_{o2}$$\n\n**4. Calculate the Output Resistance $R_{out}$**\nNow, we look into the drain of $M_1$. Transistor $M_1$ has a resistance $R_X = r_{o2}$ connected to its source. This is a standard source-degeneration configuration.\nLet's apply a test voltage $v_x$ at the output node and measure the resulting test current $i_x$ entering the node.\n*   The current $i_x$ flows through $M_1$ and then through the source resistance $R_X$ to ground.\n*   The voltage at the source of $M_1$ (node X) is $v_s = i_x \\cdot R_X = i_x \\cdot r_{o2}$.\n*   The gate of $M_1$ is at AC ground, so the gate-to-source voltage is $v_{gs1} = 0 - v_s = -i_x \\cdot r_{o2}$.\n*   Applying Kirchhoff's Current Law (KCL) at the drain of $M_1$:\n    $$i_x = g_{m1}v_{gs1} + \\frac{v_x - v_s}{r_{o1}}$$\n*   Substitute $v_s$ and $v_{gs1}$ into the equation:\n    $$i_x = g_{m1}(-i_x \\cdot r_{o2}) + \\frac{v_x - i_x \\cdot r_{o2}}{r_{o1}}$$\n*   Multiply the entire equation by $r_{o1}$ to clear the denominator:\n    $$i_x \\cdot r_{o1} = -g_{m1} \\cdot i_x \\cdot r_{o2} \\cdot r_{o1} + v_x - i_x \\cdot r_{o2}$$\n*   Rearrange the terms to solve for $v_x$:\n    $$v_x = i_x \\cdot r_{o1} + i_x \\cdot r_{o2} + i_x \\cdot g_{m1} \\cdot r_{o1} \\cdot r_{o2}$$\n    $$v_x = i_x (r_{o1} + r_{o2} + g_{m1}r_{o1}r_{o2})$$\n*   The output resistance is $R_{out} = \\frac{v_x}{i_x}$:\n    $$R_{out} = r_{o1} + r_{o2} + g_{m1}r_{o1}r_{o2}$$\n\n*(Note: If the body effect is considered, the transconductance $g_{m1}$ is replaced by $(g_{m1} + g_{mb1})$, making the formula $R_{out} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1})r_{o1}r_{o2}$. In many standard textbook problems, body effect is ignored unless specified, or $g_m$ is used to represent the effective transconductance.)*\n\n**Final Answer:**\nThe output resistance of the circuit is:\n$$R_{out} = r_{o1} + r_{o2} + g_{m1}r_{o1}r_{o2}$$\nOften, this is approximated as $R_{out} \\approx g_{m1}r_{o1}r_{o2}$ since $g_{m1}r_{o1} \\gg 1$.",
        "format": "markdown",
        "sha256": "4fc3ab66337e2eb5aab9dc22e681b803f5ba23b721ec0852ed825bf3ec68c600"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the PMOS cascode device and gives the full output-resistance expression and valid approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2216,
        "output_tokens": 13560,
        "total_tokens": 15776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11249,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 9170,
        "total_tokens": 10278,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{out}$ of the given circuit, we need to perform a small-signal analysis. \n\n**1. Set up the small-signal model:**\n*   Turn off all independent DC voltage sources by replacing them with short circuits to ground (AC ground). \n    *   $V_{DD}$ becomes AC ground.\n    *   The bias voltages $V_{b1}$ and $V_{b2}$ become AC ground.\n*   The circuit consists of two PMOS transistors, $M_1$ and $M_2$, in a cascode configuration.\n\n**2. Analyze transistor $M_2$:**\n*   The source of $M_2$ is connected to $V_{DD}$ (AC ground).\n*   The gate of $M_2$ is connected to $V_{b2}$ (AC ground).\n*   Since both the gate and source are at AC ground, the small-signal gate-to-source voltage $v_{gs2} = 0$.\n*   Consequently, the dependent current source $g_{m2}v_{gs2}$ is zero.\n*   Looking into the drain of $M_2$ (node $X$), the only path to ground is through its intrinsic output resistance $r_{o2}$. \n*   Therefore, $M_2$ can be modeled simply as a resistor $R_S = r_{o2}$ connected between node $X$ and ground.\n\n**3. Analyze transistor $M_1$:**\n*   $M_1$ acts as a common-source amplifier with source degeneration provided by $M_2$ (which we found acts as a resistor $r_{o2}$).\n*   To find $R_{out}$, we apply a test voltage $v_x$ at the output node (drain of $M_1$) and measure the resulting test current $i_x$ entering the node. $R_{out} = \\frac{v_x}{i_x}$.\n*   The current $i_x$ entering the drain of $M_1$ must flow out of its source (node $X$) and then through the equivalent resistance $r_{o2}$ to ground.\n*   Therefore, the small-signal voltage at node $X$ is:\n    $$v_s = i_x \\cdot r_{o2}$$\n*   The gate of $M_1$ is at AC ground, so its gate-to-source voltage is:\n    $$v_{gs1} = v_g - v_s = 0 - i_x \\cdot r_{o2} = -i_x \\cdot r_{o2}$$\n*   Now, apply Kirchhoff's Current Law (KCL) at the drain of $M_1$. The current $i_x$ entering the drain is the sum of the current through the dependent source and the current through the output resistance $r_{o1}$:\n    $$i_x = g_{m1}v_{gs1} + \\frac{v_x - v_s}{r_{o1}}$$\n*   Substitute the expressions for $v_s$ and $v_{gs1}$ into the KCL equation:\n    $$i_x = g_{m1}(-i_x \\cdot r_{o2}) + \\frac{v_x - i_x \\cdot r_{o2}}{r_{o1}}$$\n*   Rearrange the equation to solve for $\\frac{v_x}{i_x}$:\n    $$i_x = -g_{m1} r_{o2} i_x + \\frac{v_x}{r_{o1}} - \\frac{i_x r_{o2}}{r_{o1}}$$\n    $$i_x + g_{m1} r_{o2} i_x + \\frac{i_x r_{o2}}{r_{o1}} = \\frac{v_x}{r_{o1}}$$\n    $$i_x \\left( 1 + g_{m1} r_{o2} + \\frac{r_{o2}}{r_{o1}} \\right) = \\frac{v_x}{r_{o1}}$$\n*   Multiply both sides by $r_{o1}$:\n    $$i_x (r_{o1} + g_{m1} r_{o1} r_{o2} + r_{o2}) = v_x$$\n    $$R_{out} = \\frac{v_x}{i_x} = r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2}$$\n\n**Conclusion:**\nThe exact output resistance of the cascode circuit is:\n$$R_{out} = r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2}$$\n\n*(Note: Because the term $g_{m1} r_{o1} r_{o2}$ is typically much larger than $r_{o1}$ and $r_{o2}$, this is often approximated as $R_{out} \\approx g_{m1} r_{o1} r_{o2}$. If the body effect is considered for $M_1$, $g_{m1}$ is replaced by $g_{m1} + g_{mb1}$.)*",
        "format": "markdown",
        "sha256": "e00cd1a2e2e5117fa1754603b7b1fda9452cc2abab6a592015953246087eac87"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It identifies both devices as PMOS and derives the correct Rout expression with gm1 (body effect is optional). However, it mislabels M1 as common-source rather than identifying it as the common-gate cascode device, so the topology explanation is not fully correct.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2216,
        "output_tokens": 20415,
        "total_tokens": 22631,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 10468,
        "total_tokens": 11576,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9305,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, we need to find the small-signal output resistance, $R_{out}$, looking into the drain of transistor $M_1$. This circuit is a **PMOS cascode current source**.\n\nHere is the step-by-step derivation:\n\n### 1. Small-Signal Equivalent Circuit Setup\nTo find the output resistance, we turn off all independent voltage sources (set them to AC ground) and apply a test voltage $v_x$ at the output node to measure the resulting test current $i_x$. Then, $R_{out} = \\frac{v_x}{i_x}$.\n\n*   **$V_{DD}$** becomes AC ground.\n*   **$V_{b1}$** and **$V_{b2}$** (DC bias voltages) become AC ground.\n\n### 2. Analyze Transistor $M_2$\n*   The gate of $M_2$ is at AC ground ($v_{g2} = 0$).\n*   The source of $M_2$ is at AC ground ($v_{s2} = 0$).\n*   Therefore, the gate-source voltage $v_{gs2} = 0$.\n*   Because $v_{gs2} = 0$, the dependent current source of $M_2$ ($g_{m2}v_{gs2}$) is zero.\n*   Looking into the drain of $M_2$ (node $X$), we only see its small-signal output resistance, **$r_{o2}$**, connected to ground.\n\n### 3. Analyze Transistor $M_1$\nNow we look at $M_1$ with a resistance of $r_{o2}$ connected from its source (node $X$) to ground.\n*   Apply a test voltage **$v_x$** at the drain of $M_1$.\n*   A test current **$i_x$** flows into the drain.\n*   The gate of $M_1$ is at AC ground ($v_{g1} = 0$).\n*   Let the voltage at node $X$ be **$v_s$**.\n*   The current $i_x$ flows through $M_1$ and then through the resistance $r_{o2}$ to ground. Therefore, by Ohm's law at node $X$:\n    $$v_s = i_x \\cdot r_{o2}$$\n*   The gate-source voltage of $M_1$ is:\n    $$v_{gs1} = v_{g1} - v_s = 0 - v_s = -v_s$$\n*   The total current $i_x$ flowing from drain to source in $M_1$ is the sum of the current from the dependent source and the current through its output resistance $r_{o1}$:\n    $$i_x = g_{m1}v_{gs1} + \\frac{v_x - v_s}{r_{o1}}$$\n\n### 4. Solve for $R_{out}$\nSubstitute $v_{gs1} = -v_s$ and $v_s = i_x \\cdot r_{o2}$ into the current equation:\n$$i_x = g_{m1}(-i_x \\cdot r_{o2}) + \\frac{v_x - (i_x \\cdot r_{o2})}{r_{o1}}$$\n\nNow, solve for $\\frac{v_x}{i_x}$:\n1.  Multiply the entire equation by $r_{o1}$ to clear the denominator:\n    $$i_x \\cdot r_{o1} = -g_{m1} \\cdot r_{o1} \\cdot r_{o2} \\cdot i_x + v_x - i_x \\cdot r_{o2}$$\n2.  Move all terms with $i_x$ to one side:\n    $$v_x = i_x \\cdot r_{o1} + i_x \\cdot r_{o2} + g_{m1} \\cdot r_{o1} \\cdot r_{o2} \\cdot i_x$$\n3.  Factor out $i_x$:\n    $$v_x = i_x (r_{o1} + r_{o2} + g_{m1}r_{o1}r_{o2})$$\n4.  Divide by $i_x$ to get $R_{out}$:\n    $$R_{out} = \\frac{v_x}{i_x} = r_{o1} + r_{o2} + g_{m1}r_{o1}r_{o2}$$\n\n### Final Answer\nThe exact small-signal output resistance is:\n**$$R_{out} = r_{o1} + r_{o2} + g_{m1}r_{o1}r_{o2}$$**\n\n*(Note: Because the term $g_{m1}r_{o1}r_{o2}$ is typically much larger than $r_{o1}$ and $r_{o2}$, this is often approximated as **$R_{out} \\approx g_{m1}r_{o1}r_{o2}$**)*",
        "format": "markdown",
        "sha256": "50a5f67c1d3ef3dffbe5b3879ba2ad2d7f8e9d6d5a5fb0336728cd61bf4335ed"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly treats M1 as the output cascode device and derives Rout = ro1 + ro2 + gm1 ro1ro2, with the correct dominant approximation. Omitting body effect is allowed.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2216,
        "output_tokens": 15977,
        "total_tokens": 18193,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13543,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 4390,
        "total_tokens": 5498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3248,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram, both $M_1$ and $M_2$ are **PMOS** transistors (indicated by the arrows on their source terminals pointing inwards).\n\nTo ensure a PMOS transistor operates in the **saturation region**, the voltage at its drain must be low enough so that the channel pinches off at the drain end. The general condition for a PMOS transistor to be in saturation is:\n\n$$V_{SD} \\ge V_{SG} - |V_{thp}|$$\n\nor equivalently, in terms of node voltages:\n\n$$V_D \\le V_G + |V_{thp}|$$\n\nLet's apply this to transistor **$M_2$**:\n*   **Drain Voltage ($V_D$):** Node $X$ ($V_X$)\n*   **Gate Voltage ($V_G$):** $V_{b2}$\n*   **Source Voltage ($V_S$):** $V_{DD}$\n\nSubstituting these into the node voltage condition:\n$$V_X \\le V_{b2} + |V_{thp2}|$$\n\n**How to achieve this in the circuit:**\nThe voltage at node $X$ ($V_X$) is determined by the transistor $M_1$ below it. For $M_1$ to conduct current, it must have a sufficient source-to-gate voltage ($V_{SG1}$).\n*   $V_{SG1} = V_X - V_{b1}$\n*   Therefore, $V_X = V_{b1} + V_{SG1}$\n\nTo ensure $M_2$ stays in saturation, we must design the bias voltages such that $V_X$ does not exceed the limit we found. Substituting $V_X$ into our first inequality gives the design condition:\n\n$$V_{b1} + V_{SG1} \\le V_{b2} + |V_{thp2}|$$\n\n**Summary:**\nTo ensure $M_2$ is in saturation, the voltage at node $X$ must satisfy:\n**$$V_X \\le V_{b2} + |V_{thp2}|$$**\nPractically, this is achieved by ensuring the bias voltage $V_{b1}$ is set sufficiently lower than $V_{b2}$.",
        "format": "markdown",
        "sha256": "21ed1698f681433ea72624086ae692b4577215c24cfb41fddf7e15847795f826"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and uses VX = Vb1 + VSG1 to derive the required bias condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2232,
        "output_tokens": 9017,
        "total_tokens": 11249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7802,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 5370,
        "total_tokens": 6486,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4875,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic symbol (the arrow pointing inward at the source terminal), $M_1$ and $M_2$ are **PMOS** transistors.\n\nTo ensure a PMOS transistor is in the saturation (active) region, the source-to-drain voltage ($V_{SD}$) must be greater than or equal to the source-to-gate voltage ($V_{SG}$) minus the absolute value of the threshold voltage ($|V_{THp}|$).\n\nThe general condition for PMOS saturation is:\n$$V_{SD} \\ge V_{SG} - |V_{THp}|$$\n\nWe can rewrite this in terms of the node voltages ($V_S$, $V_G$, $V_D$):\n$$V_S - V_D \\ge (V_S - V_G) - |V_{THp}|$$\n$$-V_D \\ge -V_G - |V_{THp}|$$\n$$V_D \\le V_G + |V_{THp}|$$\n\nNow, let's apply this specifically to transistor **$M_2$** in your figure:\n*   **Drain Voltage ($V_D$):** Node $X$ ($V_X$)\n*   **Gate Voltage ($V_G$):** $V_{b2}$\n*   **Source Voltage ($V_S$):** $V_{DD}$\n\nSubstituting these into the condition $V_D \\le V_G + |V_{THp}|$, we get:\n\n$$V_X \\le V_{b2} + |V_{THp2}|$$\n\n**Conclusion:**\nTo ensure $M_2$ is in saturation, the voltage at node $X$ ($V_X$) must be kept lower than or equal to the bias voltage $V_{b2}$ plus the absolute value of $M_2$'s threshold voltage.\n\n*(Note: In a practical circuit design, $V_X$ is determined by the source-to-gate voltage required by $M_1$ to carry the current, where $V_X = V_{b1} + V_{SG1}$. Therefore, you would design your bias voltages such that $V_{b1} + V_{SG1} \\le V_{b2} + |V_{THp2}|$.)*",
        "format": "markdown",
        "sha256": "cab6198b778e1b7ddd8a24e1d660d9088251c7706c9fcd781bd1b23800198f68"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and relates VX to Vb1 through M1 to obtain the corresponding bias condition.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2232,
        "output_tokens": 6145,
        "total_tokens": 8377,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4972,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3043,
        "total_tokens": 4159,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic symbol (the arrow pointing inward at the source terminal), both $M_1$ and $M_2$ are **PMOS** transistors.\n\nTo ensure a PMOS transistor is in the **saturation region**, two conditions must be met:\n1.  **It must be ON:** $V_{SG} > |V_{THP}|$\n2.  **It must be saturated:** $V_{SD} \\ge V_{SG} - |V_{THP}|$  (which can also be written as $V_{SD} \\ge |V_{OV}|$, where $V_{OV}$ is the overdrive voltage).\n\nLet's apply this specifically to transistor **$M_2$**:\n\n### 1. Direct Condition at Node X\nWe can rewrite the saturation condition ($V_{SD} \\ge V_{SG} - |V_{THP}|$) in terms of the node voltages ($V_S$, $V_G$, $V_D$):\n*   $V_S - V_D \\ge V_S - V_G - |V_{THP}|$\n*   $-V_D \\ge -V_G - |V_{THP}|$\n*   **$V_D \\le V_G + |V_{THP}|$**\n\nFor transistor $M_2$, the nodes are:\n*   Drain ($V_D$) = $V_X$\n*   Gate ($V_G$) = $V_{b2}$\n\nSubstituting these into the inequality gives the primary condition:\n$$V_X \\le V_{b2} + |V_{THP2}|$$\n\n**Conclusion 1:** To keep $M_2$ in saturation, the voltage at node $X$ must not rise higher than one threshold voltage above its gate bias $V_{b2}$.\n\n---\n\n### 2. Design Condition (Relating $V_{b1}$ and $V_{b2}$)\nIn a real circuit, the voltage $V_X$ is determined by transistor $M_1$. We can express $V_X$ in terms of $M_1$'s parameters to find a more useful design rule for the bias voltages.\n\nAssuming $M_1$ is also ON and carrying current, its source-to-gate voltage is:\n$$V_{SG1} = |V_{THP1}| + |V_{OV1}|$$\n\nSince the source of $M_1$ is at node $X$ and its gate is at $V_{b1}$:\n$$V_X - V_{b1} = |V_{THP1}| + |V_{OV1}|$$\n$$V_X = V_{b1} + |V_{THP1}| + |V_{OV1}|$$\n\nNow, substitute this expression for $V_X$ back into our condition for $M_2$ ($V_X \\le V_{b2} + |V_{THP2}|$):\n$$V_{b1} + |V_{THP1}| + |V_{OV1}| \\le V_{b2} + |V_{THP2}|$$\n\nIf we assume the two transistors are matched and have the same threshold voltage ($|V_{THP1}| \\approx |V_{THP2}|$), the threshold terms cancel out, leaving:\n$$V_{b1} + |V_{OV1}| \\le V_{b2}$$\nor\n$$V_{b1} \\le V_{b2} - |V_{OV1}|$$\n\n**Conclusion 2:** To ensure $M_2$ remains in saturation, the bias voltage $V_{b1}$ must be set lower than $V_{b2}$ by at least the overdrive voltage of $M_1$.",
        "format": "markdown",
        "sha256": "ad13c17350a2cc00e46462b85779fdae4800dc374fd7ae43bf094453c18cf02a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, relates VX to Vb1 through M1, and derives the equivalent matched-device bias condition.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2232,
        "output_tokens": 8837,
        "total_tokens": 11069,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7311,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 4006,
        "total_tokens": 5122,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3193,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **Cascode Amplifier**. It is constructed using two NMOS transistors:\n*   **$M_1$ (Bottom Transistor):** Configured as a **Common-Source (CS)** amplifier. The input signal $v_{in}$ is applied to its gate, and its source is grounded. It acts as the primary transconductance stage, converting the input voltage into a current.\n*   **$M_2$ (Top Transistor):** Configured as a **Common-Gate (CG)** amplifier. Its gate is connected to a DC bias voltage $V_{b1}$ (which is an AC ground), and it receives the current signal from $M_1$ at its source (Node X). It acts as a current buffer.\n*   **$I_1$:** An ideal DC current source acting as an active load.\n\n### 2. DC Analysis (Biasing)\n*   The ideal current source $I_1$ dictates the DC drain current for both transistors (assuming no DC current is drawn from the $v_{out}$ terminal). Therefore, $I_{D1} = I_{D2} = I_1$.\n*   The bias voltage $V_{b1}$ must be chosen carefully to ensure that both $M_1$ and $M_2$ operate in the **saturation region**.\n    *   For $M_1$ to be in saturation: $V_{DS1} \\ge V_{GS1} - V_{TH1}$ (where $V_{DS1}$ is the voltage at Node X).\n    *   For $M_2$ to be in saturation: $V_{out} \\ge V_{b1} - V_{TH2}$.\n\n### 3. Small-Signal AC Analysis\nTo analyze the performance metrics (Gain, Input/Output Resistance), we use a low-frequency small-signal model. We assume both transistors are in saturation and have transconductances $g_{m1}, g_{m2}$ and finite output resistances $r_{o1}, r_{o2}$ (due to channel-length modulation). The ideal DC current source $I_1$ becomes an **open circuit** in AC analysis.\n\n#### A. Input Resistance ($R_{in}$)\nLooking into the input terminal ($v_{in}$), we see the gate of MOSFET $M_1$. At low frequencies, the gate draws no current.\n*   **$R_{in} = \\infty$**\n\n#### B. Output Resistance ($R_{out}$)\nThe output resistance is the resistance looking back into the $v_{out}$ node with the input $v_{in}$ grounded (AC zero). Since the load $I_1$ is an ideal current source (infinite AC resistance), $R_{out}$ is simply the resistance looking down into the drain of $M_2$.\nThis is the classic cascode output resistance formula. The presence of $M_2$ multiplies the output resistance of $M_1$ by the intrinsic gain of $M_2$:\n*   $R_{out} = r_{o1} + r_{o2} + g_{m2}r_{o1}r_{o2}$\n*   Because $g_{m2}r_{o2} \\gg 1$, this is typically approximated as:\n    **$R_{out} \\approx g_{m2}r_{o1}r_{o2}$**\n*(Note: If the body effect is considered for $M_2$, $g_{m2}$ is replaced by $(g_{m2} + g_{mb2})$).*\n\n#### C. Voltage Gain ($A_v$)\nThe voltage gain can be calculated using the formula $A_v = -G_m \\cdot R_{out}$, where $G_m$ is the short-circuit transconductance of the entire stage.\n1.  $M_1$ converts $v_{in}$ to an AC current: $i_d \\approx g_{m1}v_{in}$.\n2.  Because the resistance looking up into the source of $M_2$ ($\\approx 1/g_{m2}$) is much smaller than the resistance looking down into $M_1$ ($r_{o1}$), almost all of this AC current flows up through $M_2$ to the output. Therefore, the effective transconductance of the whole stage is roughly equal to $M_1$'s transconductance: $G_m \\approx g_{m1}$.\n3.  Multiplying this by the output resistance gives the gain:\n    $A_v \\approx -g_{m1} \\cdot (g_{m2}r_{o1}r_{o2})$\n    **$A_v \\approx -(g_{m1}r_{o1})(g_{m2}r_{o2})$**\n\nThis shows that the voltage gain of a cascode amplifier is roughly the square of the intrinsic gain of a single transistor stage.\n\n### 4. Key Characteristics and Purpose\nWhy use this circuit instead of a simple Common-Source amplifier?\n\n*   **Extremely High Voltage Gain:** As derived above, stacking the transistors drastically increases the output resistance, which in turn drastically increases the voltage gain compared to a single transistor.\n*   **Improved High-Frequency Response (Mitigating the Miller Effect):** In a standard Common-Source amplifier, the parasitic capacitance between the gate and drain ($C_{gd}$) is multiplied by the voltage gain (Miller Effect), severely limiting bandwidth. In this cascode circuit, the voltage gain from the gate of $M_1$ to its drain (Node X) is very small (approximately $-g_{m1}/g_{m2} \\approx -1$). Because the voltage swing at Node X is tiny, the Miller multiplication of $C_{gd1}$ is negligible, allowing this amplifier to operate at much higher frequencies.\n*   **Drawback - Reduced Voltage Headroom:** The main disadvantage of this topology is that it requires a higher supply voltage. To keep both transistors in saturation, the output voltage $v_{out}$ cannot swing as close to ground as it could in a single-transistor amplifier. It requires at least two overdrive voltages ($V_{ov1} + V_{ov2}$) above ground.",
        "format": "markdown",
        "sha256": "ba9a51d2e968ebedfdf2d67cc22ab60c9ed71309dd3c616139de52f111b5bed4"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2162,
        "output_tokens": 16866,
        "total_tokens": 19028,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 7936,
        "total_tokens": 9017,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6573,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **Cascode Amplifier** with an ideal current source load.\n*   **$M_1$** acts as a **Common-Source (CS)** amplifier stage. It converts the input voltage ($v_{in}$) into a current.\n*   **$M_2$** acts as a **Common-Gate (CG)** amplifier stage. It takes the current from $M_1$ and passes it to the output while providing a high output impedance.\n*   **$I_1$** is an ideal current source acting as an **active load**.\n\n### 2. DC Analysis (Biasing)\nFor the circuit to operate correctly as an amplifier, both MOSFETs ($M_1$ and $M_2$) must be biased in the **saturation region**.\n*   **Current:** The ideal current source $I_1$ dictates the DC drain current for the entire branch. Therefore, $I_{D1} = I_{D2} = I_1$.\n*   **Node X Voltage:** The DC voltage at the gate of $M_2$ ($V_{b1}$) sets the voltage at node X. Since $V_{GS2} = V_{b1} - V_X$, we have $V_X = V_{b1} - V_{GS2}$.\n*   **Saturation Conditions:**\n    *   For $M_1$: $V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_X \\ge V_{in(DC)} - V_{TH1}$\n    *   For $M_2$: $V_{DS2} \\ge V_{GS2} - V_{TH2} \\implies V_{out(DC)} - V_X \\ge V_{b1} - V_X - V_{TH2} \\implies V_{out(DC)} \\ge V_{b1} - V_{TH2}$\n*   The bias voltage $V_{b1}$ must be carefully chosen to ensure $M_1$ has enough drain-to-source voltage to stay in saturation, while not pushing $V_{out}$ too high, which would limit the output voltage swing.\n\n### 3. AC (Small-Signal) Analysis\nTo analyze the AC performance, we assume low frequencies and use the small-signal parameters: transconductance ($g_m$) and output resistance ($r_o$). The ideal current source $I_1$ acts as an open circuit (infinite resistance) in AC analysis.\n\n*   **Input Resistance ($R_{in}$):**\n    Looking into the gate of $M_1$, the resistance is ideally infinite at low frequencies.\n    $$R_{in} = \\infty$$\n\n*   **Output Resistance ($R_{out}$):**\n    The output resistance is the resistance looking into the drain of $M_2$. The cascode configuration significantly boosts the output resistance. $M_2$ acts as a source-degenerated transistor (degenerated by the output resistance of $M_1$, $r_{o1}$).\n    The exact formula is: $R_{out} = r_{o1} + r_{o2} + g_{m2}r_{o1}r_{o2}$\n    Because $g_{m2}r_{o1}r_{o2}$ is much larger than the other terms, it is approximated as:\n    $$R_{out} \\approx g_{m2} r_{o1} r_{o2}$$\n    *(This is roughly the intrinsic gain of $M_2$ multiplied by the output resistance of $M_1$.)*\n\n*   **Transconductance ($G_m$):**\n    The overall transconductance is the short-circuit output current divided by the input voltage. Since $M_2$ simply passes the AC current generated by $M_1$ to the output, the overall transconductance is approximately equal to that of $M_1$.\n    $$G_m \\approx g_{m1}$$\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain is the product of the overall transconductance and the total output resistance. Since the load $I_1$ is ideal ($R_{load} = \\infty$), the total output resistance is just $R_{out}$.\n    $$A_v = -G_m \\times R_{out}$$\n    $$A_v \\approx -g_{m1} (g_{m2} r_{o1} r_{o2})$$\n    *(Note: The gain is negative, indicating a 180-degree phase shift. The magnitude is very high, roughly proportional to the square of the intrinsic gain of a single transistor).*\n\n### 4. Advantages and Disadvantages\n\n**Advantages:**\n1.  **Extremely High Voltage Gain:** As derived above, the gain is roughly $(g_m r_o)^2$, making it much higher than a simple common-source amplifier.\n2.  **High Output Impedance:** Makes it an excellent building block for current mirrors or high-gain stages.\n3.  **Reduced Miller Effect (High Bandwidth):** In a standard CS amplifier, the gate-drain capacitance ($C_{gd}$) is multiplied by the voltage gain, severely limiting high-frequency performance. In a cascode, the voltage gain from $v_{in}$ to node X is very low (approximately $-g_{m1}/g_{m2} \\approx -1$). Therefore, the Miller multiplication is negligible, giving the cascode amplifier a much wider bandwidth and excellent high-frequency performance.\n\n**Disadvantages:**\n1.  **Reduced Output Voltage Swing (Headroom):** To keep both $M_1$ and $M_2$ in saturation, the output voltage cannot drop below the sum of their overdrive voltages ($V_{DS(sat)1} + V_{DS(sat)2}$). This consumes voltage headroom, which is a significant drawback in modern low-voltage power supply designs.\n2.  **Requires Extra Biasing:** An additional stable DC bias voltage ($V_{b1}$) must be generated for the gate of $M_2$.",
        "format": "markdown",
        "sha256": "1933a40ff7aa89864cb021e9f842cca3d2225b90ae147ebe32c3b156878c5f6c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the common-source input and common-gate cascode and gives the correct ideal-load gain, −gm1gm2ro1ro2, with body effect omitted as allowed. Its node-X/Miller comment is incorrect, but does not change the required topology and gain result.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2162,
        "output_tokens": 9549,
        "total_tokens": 11711,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 4243,
        "total_tokens": 5324,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **Cascode Amplifier** with an ideal current source load.\n*   **$M_1$** acts as a **Common-Source (CS)** amplifier stage. It converts the input voltage ($v_{in}$) into a current.\n*   **$M_2$** acts as a **Common-Gate (CG)** amplifier stage. It takes the current from $M_1$ and passes it to the output, acting as a current buffer.\n*   **$I_1$** is an ideal DC current source acting as an **active load**.\n\n### 2. DC Analysis (Biasing)\nFor the amplifier to operate correctly, both NMOS transistors ($M_1$ and $M_2$) must be biased in the **saturation region**.\n*   **Current:** The ideal current source $I_1$ dictates the DC drain current for the entire branch. Therefore, $I_{D1} = I_{D2} = I_1$.\n*   **Node X Voltage:** The DC voltage at the gate of $M_2$ is fixed at $V_{b1}$. The voltage at node X (the source of $M_2$) will be $V_X = V_{b1} - V_{GS2}$, where $V_{GS2}$ is the gate-to-source voltage required to sustain current $I_1$ through $M_2$.\n*   **Voltage Headroom (Disadvantage):** A primary drawback of the cascode topology is the reduced output voltage swing. To keep both transistors in saturation, the output voltage $v_{out}$ cannot drop too low.\n    *   $M_1$ needs $V_{DS1} \\ge V_{GS1} - V_{TH1}$ (Overdrive voltage, $V_{OV1}$)\n    *   $M_2$ needs $V_{DS2} \\ge V_{GS2} - V_{TH2}$ (Overdrive voltage, $V_{OV2}$)\n    *   Therefore, the minimum output voltage is $V_{out(min)} \\approx V_{OV1} + V_{OV2}$. This consumes more voltage headroom compared to a simple common-source amplifier.\n\n### 3. Small-Signal AC Analysis\nTo understand the performance metrics (Gain, Input/Output Resistance), we look at the small-signal model.\n\n*   **Input Resistance ($R_{in}$):**\n    Looking into the gate of $M_1$ at low frequencies, the impedance is purely capacitive. Therefore, the DC/low-frequency input resistance is infinite.\n    $$R_{in} = \\infty$$\n\n*   **Output Resistance ($R_{out}$):**\n    This is one of the main reasons to use a cascode. The output resistance is the resistance looking into the drain of $M_2$.\n    The resistance looking down into the drain of $M_1$ is $r_{o1}$. $M_2$ acts as a source-degenerated amplifier where the degeneration resistance is $r_{o1}$. The formula for the output resistance of a cascode is:\n    $$R_{out} = r_{o2} + r_{o1} + (g_{m2} + g_{mb2})r_{o2}r_{o1}$$\n    Assuming $(g_{m2} + g_{mb2})r_{o2} \\gg 1$, this simplifies to:\n    $$R_{out} \\approx (g_{m2} + g_{mb2})r_{o2}r_{o1}$$\n    *(Note: $g_{mb2}$ accounts for the body effect since the source of $M_2$ is not grounded. Often, it is simplified to just $g_{m2}r_{o2}r_{o1}$)*.\n    **Conclusion:** The output resistance of $M_1$ ($r_{o1}$) is boosted by the intrinsic gain of $M_2$ ($g_{m2}r_{o2}$). Because the load $I_1$ is an ideal current source (infinite AC resistance), the total output resistance of the circuit is simply $R_{out}$.\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain is the product of the effective transconductance ($G_m$) of the stage and the total output resistance.\n    The transconductance of the whole stage is approximately the transconductance of the input transistor, $M_1$. So, $G_m \\approx g_{m1}$.\n    $$A_v = -G_m \\cdot R_{out}$$\n    $$A_v \\approx -g_{m1} \\cdot [(g_{m2} + g_{mb2})r_{o2}r_{o1}]$$\n    **Conclusion:** The circuit achieves a very high voltage gain, roughly proportional to the square of the intrinsic gain of a single transistor ($(g_m r_o)^2$).\n\n### 4. High-Frequency Performance (The Miller Effect)\nThe most significant advantage of the cascode configuration over a simple Common-Source amplifier is its high-frequency response.\n*   In a standard CS amplifier, the parasitic capacitance between the gate and drain ($C_{gd}$) is multiplied by the large voltage gain of the stage due to the **Miller Effect**, creating a large effective input capacitance that severely limits bandwidth.\n*   In this cascode circuit, the voltage gain from the input ($v_{in}$) to node X is very small. The resistance looking into the source of $M_2$ is roughly $1/g_{m2}$. Therefore, the gain of the $M_1$ stage is $A_{v1} \\approx -g_{m1} \\cdot (1/g_{m2}) \\approx -1$ (assuming matched transistors).\n*   Because the voltage swing at node X is very small, the Miller multiplication of $M_1$'s $C_{gd}$ is negligible. This pushes the dominant pole to a much higher frequency, resulting in a **much wider bandwidth**.\n\n### Summary of Characteristics\n| Feature | Description |\n| :--- | :--- |\n| **Topology** | Telescopic Cascode (CS + CG) |\n| **Voltage Gain** | Very High ($\\approx -g_{m1}g_{m2}r_{o1}r_{o2}$) |\n| **Output Resistance** | Very High ($\\approx g_{m2}r_{o2}r_{o1}$) |\n| **Bandwidth** | High (Suppresses the Miller Effect) |\n| **Drawback** | Reduced voltage headroom (requires higher supply voltage for the same swing) |",
        "format": "markdown",
        "sha256": "d46cba2035bf8b22b03e70b22930e13d158f06201424add884302db86b680a52"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. This meets the golden solution’s full-credit rule; the Miller-effect discussion is a secondary overstatement.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2162,
        "output_tokens": 9923,
        "total_tokens": 12085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 3925,
        "total_tokens": 5006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, **yes**, the circuit shown is a **cascode structure**.\n\nHere is a breakdown of why:\n\n1.  **Transistor $M_1$ (Bottom):** This transistor acts as a **common-source** amplifier. The input signal ($V_{\\text{in}}$) is applied to its gate, and its source is connected to ground.\n2.  **Transistor $M_2$ (Top):** This transistor acts as a **common-gate** amplifier. Its gate is connected to a constant DC bias voltage ($V_{b1}$), and its source is driven by the output (drain) of $M_1$.\n\nA cascode amplifier is classically defined by this exact topology: a common-source stage feeding directly into a common-gate stage.",
        "format": "markdown",
        "sha256": "ea3fa4b080df39fedc2f5f34cd41f917a5eefd2b8f71ebb472aa9d49e7a69df2"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a grounded-source common-source device; M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2228,
        "output_tokens": 3162,
        "total_tokens": 5390,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2737,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 1549,
        "total_tokens": 2663,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, **yes**, it is a cascode structure.\n\nHere's a breakdown of why:\n\n*   **$M_1$ (Bottom Transistor):** This transistor is in a **common-source** configuration. The input signal ($V_{\\text{in}}$) is applied to its gate, and its source is connected to ground. It acts as a transconductance amplifier, converting the input voltage into a current.\n*   **$M_2$ (Top Transistor):** This transistor is in a **common-gate** configuration. Its gate is connected to a constant DC bias voltage ($V_{b1}$), meaning it is at AC ground. It receives the current from $M_1$ at its source and passes it to the output at its drain. It acts as a current buffer.\n\nThe combination of a common-source stage driving a common-gate stage is the classic definition of a **cascode amplifier**.",
        "format": "markdown",
        "sha256": "01f8d378b96e36ccd9f6bf9a5b5dcb034871e96d06f4b2f0f2a0d29a9965ca1a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a common-source device. M1 is a PMOS source follower with its drain grounded, so the structure lacks the cascode resistance boost.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2228,
        "output_tokens": 2922,
        "total_tokens": 5150,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2549,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 1428,
        "total_tokens": 2542,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1226,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, **yes**, the circuit shown is a **cascode structure**.\n\nHere is a breakdown of why:\n\n*   **Transistor $M_1$** is configured as a **common-source** amplifier. The input signal ($V_{\\text{in}}$) is applied to its gate, and its source is grounded.\n*   **Transistor $M_2$** is configured as a **common-gate** amplifier. Its gate is connected to a constant DC bias voltage ($V_{b1}$), and its source receives the output from the drain of $M_1$. The final output ($V_{\\text{out}}$) is taken from its drain.\n\nA cascode amplifier is defined by this exact arrangement: a common-source stage feeding directly into a common-gate stage.",
        "format": "markdown",
        "sha256": "d21da10272a94e572d21928f35a47e6db9d068219d4afdcedcc30873cb460074"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1: it is a PMOS source follower with its drain grounded, not a common-source stage.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2228,
        "output_tokens": 2993,
        "total_tokens": 5221,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2592,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 1494,
        "total_tokens": 2608,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1323,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the Miller effect is less pronounced in a cascode amplifier, we first need to understand what causes the Miller effect and how the specific architecture of a cascode neutralizes that cause. \n\nHere is the step-by-step explanation:\n\n### 1. The Problem: The Miller Effect\nIn a standard inverting amplifier, such as a Common Source (MOSFET) or Common Emitter (BJT) amplifier, there is a small parasitic capacitance between the input and the output. In a MOSFET, this is the gate-to-drain capacitance ($C_{gd}$).\n\nWhen an AC signal is applied to the input, the amplifier multiplies that signal by its voltage gain ($-A_v$) and inverts it at the output. Because the voltage at the output is swinging in the opposite direction of the input, the capacitor $C_{gd}$ has to charge and discharge much more than it would if the output were stationary. \n\nTo the input source, this makes the capacitor look much larger than it actually is. The effective input capacitance is calculated by the **Miller Equation**:\n$$C_{in} = C_{gd} \\times (1 + |A_v|)$$\n\nIf the amplifier has a high gain (e.g., 100), the parasitic capacitance is multiplied by 101. This massive effective capacitance creates a low-pass filter at the input, severely limiting the high-frequency bandwidth of the amplifier.\n\n### 2. The Solution: The Cascode Architecture\nA cascode amplifier is a two-stage circuit consisting of a **Common Source (CS)** stage driving a **Common Gate (CG)** stage. \n* **Transistor 1 (Bottom):** The input signal goes into the gate.\n* **Transistor 2 (Top):** The gate is tied to a constant DC voltage (AC ground). Its source connects to the drain of Transistor 1, and its drain connects to the output load.\n\n### 3. Why the Cascode Defeats the Miller Effect\nThe Miller effect relies on one thing to ruin bandwidth: **high voltage gain across the input transistor.** The cascode prevents this by restricting the voltage gain of the first transistor, while letting the second transistor handle the voltage swing.\n\nHere is how it works:\n\n* **Low Impedance Load for the First Stage:** The \"load\" for the bottom transistor (M1) is the input of the top transistor (M2). Because M2 is in a Common Gate configuration, its input impedance looking into the source is very low (approximately $1/g_{m2}$).\n* **Drastically Reduced Voltage Gain:** The voltage gain of the first stage ($A_{v1}$) is the transconductance of M1 multiplied by its load. \n  $$A_{v1} = -g_{m1} \\times (1/g_{m2})$$\n  If the two transistors are identical, $g_{m1} \\approx g_{m2}$, meaning **the voltage gain of the first stage is approximately -1.**\n* **Applying the Miller Equation:** Because the voltage gain of the input transistor is now only 1, we plug that back into the Miller equation:\n  $$C_{in} = C_{gd} \\times (1 + 1) = 2C_{gd}$$\n\nInstead of the capacitance being multiplied by 100, **it is only multiplied by 2.** The voltage at the drain of the first transistor barely moves, so the parasitic capacitor doesn't have to charge and discharge drastically. \n\n### What about the second transistor?\nYou might wonder if the Miller effect just moves to the top transistor (M2). It does not. \nBecause M2 is a Common Gate amplifier, its gate is tied to AC ground. The parasitic capacitance between its drain and gate ($C_{gd2}$) is connected directly between the output and ground. Because the gate voltage doesn't move, there is no inverting voltage swing across the capacitor, and therefore **no Miller multiplication occurs on the second stage.**\n\n### Summary\nThe Miller effect is less pronounced in a cascode because the top transistor acts as a current buffer. It takes the current generated by the bottom transistor and passes it to the output load, but it holds the voltage at the drain of the bottom transistor nearly constant. **By preventing the input transistor's drain voltage from swinging, the cascode eliminates the voltage gain required for the Miller effect to occur**, resulting in a massive increase in high-frequency bandwidth.",
        "format": "markdown",
        "sha256": "6751816ff6b93344672a5f2dad74a3b1908dc535fd900b31e522083d8b352335"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance node at M1’s drain and derives a local gain near −1, so Cgd1 is multiplied by about 2 rather than the full-stage gain. The later claims that the node is nearly fixed and the effect is eliminated overstate the reduction, but the core explanation is correct and this is a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 4376,
        "total_tokens": 4402,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2395,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 1997,
        "total_tokens": 2010,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1052,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the Miller effect is less pronounced in a cascode amplifier, we first need to understand what causes the Miller effect and how the specific architecture of a cascode neutralizes that cause. \n\nHere is the step-by-step explanation of why the cascode configuration defeats the Miller effect.\n\n*(Note: This explanation uses MOSFET terminology—Common Source and Common Gate—but the exact same principles apply to BJTs using Common Emitter and Common Base).*\n\n### 1. The Problem: The Miller Effect in a Standard Amplifier\nIn a standard Common Source (CS) amplifier, there is a parasitic capacitance between the gate (input) and the drain (output), known as **$C_{gd}$**. \n\nBecause the amplifier inverts the signal and amplifies it by a voltage gain factor of **$A_v$**, a small change in voltage at the gate results in a massive, opposite change in voltage at the drain. This forces a large amount of current to charge and discharge $C_{gd}$. \n\nTo the input source, this makes the capacitor look much larger than it actually is. The effective input capacitance becomes:\n**$C_{in} = C_{gd} \\times (1 + |A_v|)$**\n\nIf your amplifier has a gain of 100, that tiny parasitic capacitor looks 101 times larger to the input signal. This massive capacitance acts as a low-pass filter, destroying the amplifier's high-frequency bandwidth.\n\n### 2. The Cascode Architecture\nA cascode amplifier splits the job of amplification across two transistors:\n1. **Transistor 1 (Bottom):** A Common Source (CS) stage. The input signal goes into its gate.\n2. **Transistor 2 (Top):** A Common Gate (CG) stage. It sits on top of Transistor 1. Its gate is tied to an AC ground, and it delivers the final output to the load.\n\n### 3. Why the Cascode Defeats the Miller Effect\nThe Miller effect relies on one thing to ruin bandwidth: **high voltage gain across the inverting transistor**. The cascode prevents this from happening.\n\n**A. The first stage has almost no voltage gain.**\nThe voltage gain of Transistor 1 is determined by its transconductance ($g_{m1}$) multiplied by the load resistance it \"sees\" at its drain. \nIn a cascode, Transistor 1's drain is connected directly to the source of Transistor 2. The input impedance looking into the source of a Common Gate transistor is extremely low—approximately **$1/g_{m2}$**.\n\nTherefore, the voltage gain of the first stage ($A_{v1}$) is:\n$A_{v1} = -g_{m1} \\times (1/g_{m2})$\n\nIf both transistors are identical, $g_{m1} \\approx g_{m2}$, meaning **the voltage gain of the first stage is roughly -1.**\n\n**B. The Miller capacitance is neutralized.**\nBecause the voltage gain of the first stage is only -1, let's look at the Miller equation again for Transistor 1:\n$C_{in} = C_{gd} \\times (1 + |-1|)$\n**$C_{in} = 2 \\times C_{gd}$**\n\nInstead of the capacitance being multiplied by 100, it is only multiplied by 2. The input capacitance remains very small, preserving the high-frequency bandwidth of the amplifier.\n\n### 4. But wait, where does the gain come from?\nIf the first stage has a gain of 1, how is this an amplifier? \n\nThe voltage gain happens entirely in **Transistor 2** (the Common Gate stage). Transistor 1 converts the input voltage into a current. This current passes through Transistor 2 and across the final load resistor to create a massive voltage swing at the final output.\n\n**Why doesn't Transistor 2 suffer from the Miller effect?**\nBecause Transistor 2 is a Common Gate amplifier, its gate is tied to AC ground. This grounded gate acts as a physical and electrical shield between its input (source) and its output (drain). Furthermore, Common Gate amplifiers are non-inverting, meaning the Miller multiplier equation doesn't apply in the same destructive way.\n\n### Summary\nThe Miller effect is less pronounced in a cascode because the second transistor acts as a very low-impedance load for the first transistor. This restricts the first transistor's voltage gain to roughly 1, preventing the parasitic feedback capacitance from being multiplied. The actual voltage amplification is shifted to the second transistor, which is immune to the Miller effect because its gate is grounded.",
        "format": "markdown",
        "sha256": "b5e3a7aee2d2b3f285fed9318b0dabfb3e27554b5542895b8fcbd4202bb07886"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the resulting gain across M1’s Cgd being about −1, so its Miller multiplier is about 2 rather than the full-stage gain. The claims that the effect is “neutralized” and the common-gate device is immune are overstatements, but do not undermine the essential explanation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 4225,
        "total_tokens": 4251,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2209,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 2040,
        "total_tokens": 2053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the Miller effect is less pronounced in a cascode amplifier, we first need to understand what causes the Miller effect and how the specific architecture of a cascode neutralizes it. \n\nHere is the step-by-step explanation:\n\n### 1. The Problem: The Miller Effect in a Standard Amplifier\nIn a standard inverting amplifier, such as a Common-Source (MOSFET) or Common-Emitter (BJT) configuration, there is a parasitic capacitance between the input and the output. In a MOSFET, this is the gate-to-drain capacitance ($C_{gd}$).\n\nWhen an AC signal is applied to the input, the amplifier inverts and amplifies it. Because the voltage at the output is moving in the opposite direction of the input, the capacitor $C_{gd}$ experiences a much larger voltage swing than just the input signal alone. \n\nThis causes the effective input capacitance to be multiplied by the voltage gain of the amplifier. The formula for this \"Miller Capacitance\" ($C_M$) is:\n**$C_M = C_{gd} \\times (1 + |A_v|)$**\n*(where $A_v$ is the voltage gain).*\n\nIf your amplifier has a gain of 100, the input capacitance looks 101 times larger than the physical capacitor. This massive capacitance acts as a low-pass filter, severely limiting the high-frequency bandwidth of the amplifier.\n\n### 2. The Cascode Architecture\nA cascode amplifier solves this by splitting the job of the amplifier into two stages using two transistors stacked on top of each other:\n*   **Transistor 1 (Bottom):** A Common-Source (or Common-Emitter) stage. This takes the input voltage and converts it into a current.\n*   **Transistor 2 (Top):** A Common-Gate (or Common-Base) stage. This takes the current from Transistor 1 and converts it back into a large output voltage.\n\n### 3. Why the Cascode Defeats the Miller Effect\nThe Miller effect only happens when a transistor has **both** a parasitic feedback capacitor ($C_{gd}$) **and** a high voltage gain ($A_v$). The cascode prevents this combination.\n\n**Looking at Transistor 1 (The Input Stage):**\nThe voltage gain of any transistor is roughly its transconductance ($g_m$) multiplied by its load resistance ($R_{load}$). \nFor Transistor 1, its \"load\" is the input of Transistor 2. \nBecause Transistor 2 is in a Common-Gate configuration, its input impedance is extremely low—approximately **$1/g_{m2}$**.\n\nTherefore, the voltage gain of the first transistor ($A_{v1}$) is:\n$A_{v1} = g_{m1} \\times (1 / g_{m2})$\n\nBecause the two transistors are usually identical or similar, $g_{m1} \\approx g_{m2}$. This means:\n**$A_{v1} \\approx 1$**\n\nBecause the voltage gain of the input transistor is restricted to roughly 1, the Miller effect equation becomes:\n$C_M = C_{gd} \\times (1 + 1) = \\mathbf{2C_{gd}}$\n\nInstead of the capacitance being multiplied by 100, **it is only multiplied by 2.** The Miller effect is virtually eliminated at the input.\n\n**Looking at Transistor 2 (The Output Stage):**\nYou might ask: *\"If Transistor 1 has a gain of 1, where does the high voltage gain come from? And doesn't Transistor 2 suffer from the Miller effect?\"*\n\nTransistor 2 provides the high voltage gain because it is connected to the actual, high-impedance output load. However, **Transistor 2 does not suffer from the Miller effect.** \nBecause it is a Common-Gate amplifier, its gate is tied to AC ground. The parasitic capacitance between its drain and gate ($C_{gd2}$) is connected directly to ground, not fed back to the input. Therefore, there is no feedback path to multiply the capacitance.\n\n### Summary\nThe Miller effect is less pronounced in a cascode because the input transistor is forced to drive a very low-impedance load (the second transistor). This limits the voltage gain of the input transistor to roughly 1, preventing the parasitic capacitance from being multiplied. The second transistor provides the necessary high voltage gain, but because its gate/base is grounded, it is immune to the Miller effect. \n\nThe result is an amplifier that has **both high gain and high bandwidth**.",
        "format": "markdown",
        "sha256": "a64547317c5dac0eb8037731dddf2e0f05370830b62454a334c6e9a2664a27cc"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance node at M1’s drain and the resulting gain of about −1, so Cgd1 is multiplied by roughly 2 rather than by the full stage gain. “Virtually eliminated” slightly overstates the reduction, but the answer explicitly gives the factor of 2; this is a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 4566,
        "total_tokens": 4592,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2559,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 2103,
        "total_tokens": 2116,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1119,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis of its structure, function, and key characteristics.\n\n### 1. Circuit Identification\nThe circuit is a **Common-Gate (CG) Amplifier** with an **active load**.\n*   **$M_1$ (Top Transistor):** This is a **PMOS** transistor. We can tell because the arrow on its source terminal points inward towards the channel, and its source is connected to the positive supply voltage, $V_{DD}$.\n*   **$M_2$ (Bottom Transistor):** Based on the circuit topology, this is an **NMOS** transistor. *(Note: While the arrow on the source terminal is drawn pointing inward, which sometimes denotes a PMOS in older conventions, a PMOS-PMOS stack here would lack a DC path to ground and wouldn't function as a standard amplifier. The standard configuration for this topology uses an NMOS for the bottom amplifying device).*\n\n### 2. Component Roles\n*   **$M_1$ (Active Load):** Its gate is connected to a constant DC bias voltage, $V_{b2}$. Because its source ($V_{DD}$) and gate ($V_{b2}$) are at fixed potentials, $M_1$ acts as a **constant current source**. In small-signal analysis, it provides a high output resistance ($r_{o1}$), which helps achieve a higher voltage gain compared to using a simple passive resistor.\n*   **$M_2$ (Amplifying Device):** Its gate is connected to a constant DC bias voltage, $V_{b1}$. The input signal ($V_{in}$) is applied to its source terminal, and the output signal ($V_{out}$) is taken from its drain terminal. This specific arrangement (input at source, output at drain, gate grounded for AC) defines the **Common-Gate** configuration.\n\n### 3. Qualitative Operation\n*   **DC Biasing:** $V_{b1}$ and $V_{b2}$ are chosen to ensure both transistors operate in their saturation regions. $M_1$ supplies a steady DC bias current that flows down through $M_2$ and into the input source (which must be capable of sinking this DC current).\n*   **AC Signal Amplification:**\n    *   When the input voltage $V_{in}$ **increases**, the gate-to-source voltage of $M_2$ ($V_{gs2} = V_{b1} - V_{in}$) **decreases**.\n    *   A smaller $V_{gs2}$ means $M_2$ wants to conduct less current.\n    *   However, $M_1$ is trying to push a constant current into the output node. Since $M_2$ is taking less current, the \"excess\" current charges the output node, causing $V_{out}$ to **increase**.\n    *   Because an increase in $V_{in}$ leads to an increase in $V_{out}$, this amplifier is **non-inverting** (it has a positive voltage gain).\n\n### 4. Small-Signal Characteristics\nAssuming both transistors are in saturation, we can define the key performance metrics using small-signal parameters ($g_m$ for transconductance, $r_o$ for output resistance, and $g_{mb}$ for body effect transconductance).\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain is positive and is determined by the transconductance of $M_2$ and the total resistance at the output node.\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx (g_{m2} + g_{mb2}) \\cdot (r_{o1} \\parallel r_{o2})$$\n    *(Note: The body effect $g_{mb2}$ is included because the source of $M_2$ is not at AC ground).*\n\n*   **Input Resistance ($R_{in}$):**\n    A defining characteristic of a common-gate amplifier is its relatively **low input resistance**. Looking into the source of $M_2$:\n    $$R_{in} \\approx \\frac{r_{o1} + r_{o2}}{1 + (g_{m2} + g_{mb2})r_{o2}}$$\n    If $r_{o1}$ and $r_{o2}$ are roughly similar, this simplifies to approximately $\\frac{1}{g_{m2} + g_{mb2}}$, which is typically a small value (e.g., tens to hundreds of ohms).\n\n*   **Output Resistance ($R_{out}$):**\n    The output resistance is the parallel combination of the resistance looking up into $M_1$ and down into $M_2$. Since the source of $M_2$ is driven by the input (which is an AC short for output resistance calculations), the resistance looking down is just $r_{o2}$.\n    $$R_{out} = r_{o1} \\parallel r_{o2}$$\n    This is a relatively **high output resistance**.\n\n### Summary\nThis circuit is a **Common-Gate amplifier with a PMOS active load**. It is characterized by a **positive voltage gain**, a **high output resistance**, and a notably **low input resistance**. Because of its low input resistance, it is often used as a **current buffer** or as the second stage in a cascode amplifier to improve high-frequency performance (as it does not suffer from the Miller effect).",
        "format": "markdown",
        "sha256": "dc1326a396aa82c44a7d62381b7fc5511b8bdd05611159fb50bbdfe450cd321b"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage with a PMOS current-source load, places Vin at M2’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. The body-effect gain refinement is acceptable; the minor input-resistance simplification does not change the essential answer.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 25458,
        "total_tokens": 27678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22831,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 11208,
        "total_tokens": 12318,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10038,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic provided, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification and Topology\nThe circuit is a **Common-Gate (CG) Amplifier with an Active Load**.\n*   **$M_2$ (Bottom Transistor):** This is an **NMOS** transistor acting as the primary amplifying device. We know it's in a common-gate configuration because:\n    *   The input signal ($V_{\\text{in}}$) is applied to its **source**.\n    *   The output signal ($V_{\\text{out}}$) is taken from its **drain**.\n    *   Its **gate** is connected to a constant DC bias voltage ($V_{b1}$), which acts as an AC ground.\n*   **$M_1$ (Top Transistor):** This is a **PMOS** transistor acting as an **active load** (a constant current source).\n    *   Its source is tied to the positive supply ($V_{DD}$).\n    *   Its gate is tied to a constant DC bias voltage ($V_{b2}$).\n    *   Because its gate-to-source voltage ($V_{GS}$) is fixed, it provides a relatively constant DC current to bias $M_2$ while presenting a high small-signal resistance ($r_{o1}$) to the output node.\n\n### 2. Qualitative Operation\n*   **DC Biasing:** The voltages $V_{b1}$ and $V_{b2}$ are chosen to ensure both transistors operate in their saturation regions. $M_1$ sets the DC bias current that flows through $M_2$.\n*   **AC Signal Amplification:** When the input voltage $V_{\\text{in}}$ increases, the source voltage of $M_2$ increases. Since the gate of $M_2$ is at a fixed voltage ($V_{b1}$), the gate-to-source voltage ($V_{GS2} = V_{b1} - V_{\\text{in}}$) decreases (becomes less positive).\n*   A decrease in $V_{GS2}$ causes $M_2$ to conduct less current.\n*   Because $M_1$ is trying to push a constant current into the output node, the reduced current demand from $M_2$ causes the voltage at the output node ($V_{\\text{out}}$) to **rise**.\n*   Therefore, an increase in $V_{\\text{in}}$ leads to an increase in $V_{\\text{out}}$. This means the amplifier is **non-inverting**.\n\n### 3. Quantitative Small-Signal Analysis\nTo analyze the performance metrics, we use a small-signal model. Let's define the parameters:\n*   $g_{m2}$: Transconductance of $M_2$\n*   $g_{mb2}$: Body-effect transconductance of $M_2$ (relevant because its source is not at ground)\n*   $r_{o2}$: Output resistance of $M_2$\n*   $r_{o1}$: Output resistance of $M_1$\n\n**A. Voltage Gain ($A_v$)**\nThe voltage gain is the ratio of the output voltage to the input voltage ($v_{\\text{out}} / v_{\\text{in}}$).\n*   The total resistance at the output node is the parallel combination of the resistance looking down into $M_2$ and looking up into $M_1$.\n*   Looking up into $M_1$, the resistance is simply $r_{o1}$.\n*   The effective transconductance of the common-gate stage includes the body effect: $(g_{m2} + g_{mb2})$.\n*   The exact voltage gain formula is:\n    $$A_v = \\frac{1 + (g_{m2} + g_{mb2})r_{o2}}{r_{o1} + r_{o2}} \\cdot r_{o1}$$\n*   Assuming $(g_{m2} + g_{mb2})r_{o2} \\gg 1$, this simplifies to the standard approximation:\n    $$A_v \\approx (g_{m2} + g_{mb2}) (r_{o1} \\parallel r_{o2})$$\n    *(Note: The gain is positive, confirming it is a non-inverting amplifier.)*\n\n**B. Input Resistance ($R_{\\text{in}}$)**\nThe input resistance is the resistance seen looking into the source of $M_2$.\n*   A key characteristic of common-gate amplifiers is their **low input impedance**.\n*   The exact formula, taking the load $r_{o1}$ into account, is:\n    $$R_{\\text{in}} = \\frac{r_{o1} + r_{o2}}{1 + (g_{m2} + g_{mb2})r_{o2}}$$\n*   If we assume $r_{o1}$ and $r_{o2}$ are roughly equal and $(g_{m2} + g_{mb2})r_{o2} \\gg 1$, this simplifies to:\n    $$R_{\\text{in}} \\approx \\frac{2}{g_{m2} + g_{mb2}}$$\n    *(If the load were an ideal current source with infinite resistance, $R_{\\text{in}}$ would be higher, but with a practical active load, it remains relatively low, on the order of $1/g_m$.)*\n\n**C. Output Resistance ($R_{\\text{out}}$)**\nThe output resistance is the resistance seen looking back into the output node with the input grounded ($v_{\\text{in}} = 0$).\n*   With the input grounded, the source of $M_2$ is at AC ground.\n*   Looking down into the drain of $M_2$, we just see its output resistance $r_{o2}$.\n*   Looking up into the drain of $M_1$, we see its output resistance $r_{o1}$.\n*   Therefore, the total output resistance is:\n    $$R_{\\text{out}} = r_{o1} \\parallel r_{o2}$$\n\n### Summary of Characteristics\n*   **Function:** Non-inverting voltage amplifier.\n*   **Input Impedance:** Low (makes it useful for impedance matching, like in RF antennas, or as a current buffer).\n*   **Output Impedance:** High (similar to a common-source amplifier).\n*   **Voltage Gain:** Moderate to high (similar magnitude to a common-source amplifier with the same load).\n*   **High-Frequency Performance:** Generally excellent because it does not suffer from the Miller effect (the parasitic capacitance between input and output is minimal since the gate is grounded).",
        "format": "markdown",
        "sha256": "973caafdc3a97ca27cbf5217d694d847fded18a95a898db47083178cb287a59f"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage with a PMOS current-source load, places the input at M2’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. Its body-effect refinements are acceptable.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 25466,
        "total_tokens": 27686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21730,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 10709,
        "total_tokens": 11819,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9266,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Gate (CG) Amplifier with an Active Load**.\n*   **$M_2$ (NMOS):** This is the primary amplifying transistor. The input signal ($V_{in}$) is applied to its source, the output ($V_{out}$) is taken from its drain, and its gate is connected to a DC bias voltage ($V_{b1}$), making it an AC ground. This configuration defines a common-gate amplifier.\n*   **$M_1$ (PMOS):** This transistor acts as an **active load** (a constant current source). Its source is tied to $V_{DD}$, and its gate is tied to a constant DC bias voltage ($V_{b2}$). Because its gate-to-source voltage is fixed, it provides a relatively constant DC bias current to $M_2$ while presenting a high small-signal resistance ($r_{o1}$) to the output node.\n\n### 2. DC Operating Conditions (Biasing)\nFor the circuit to operate properly as a linear amplifier, both transistors must be biased in their **saturation regions**:\n*   **For $M_1$ (PMOS):** The voltage at the output node must be low enough to keep it in saturation: $V_{out} \\le V_{b2} + |V_{thp}|$ (where $V_{thp}$ is the threshold voltage of the PMOS).\n*   **For $M_2$ (NMOS):** The voltage at the output node must be high enough to keep it in saturation: $V_{out} \\ge V_{in(DC)} + (V_{b1} - V_{in(DC)} - V_{thn}) \\Rightarrow V_{out} \\ge V_{b1} - V_{thn}$ (where $V_{thn}$ is the threshold voltage of the NMOS).\n\n### 3. Small-Signal AC Analysis\nTo analyze the performance metrics (Gain, Input/Output Resistance), we use a small-signal model.\n*   **Assumptions:** Low frequency (ignoring parasitic capacitances) and both transistors are in saturation.\n*   **Parameters:**\n    *   $g_{m2}$: Transconductance of $M_2$.\n    *   $g_{mb2}$: Body-effect transconductance of $M_2$ (since its source is not at ground, it experiences the body effect).\n    *   $r_{o2}$: Output resistance (channel-length modulation) of $M_2$.\n    *   $r_{o1}$: Output resistance of $M_1$.\n\n#### A. Voltage Gain ($A_v$)\nThe common-gate amplifier is a **non-inverting** amplifier. If $V_{in}$ increases, the source voltage of $M_2$ increases, which decreases its gate-to-source voltage ($V_{GS}$). This reduces the current $M_2$ wants to pull from the output node. Since $M_1$ is pushing a constant current down, the \"excess\" current charges the output node, causing $V_{out}$ to rise.\n\nThe exact small-signal voltage gain is:\n$$A_v = \\frac{V_{out}}{V_{in}} = \\frac{[(g_{m2} + g_{mb2})r_{o2} + 1] \\cdot r_{o1}}{r_{o1} + r_{o2}}$$\n\n**Approximation:** Because $(g_{m2} + g_{mb2})r_{o2} \\gg 1$, the gain can be approximated as:\n$$A_v \\approx (g_{m2} + g_{mb2}) (r_{o1} \\parallel r_{o2})$$\nThis shows the gain is proportional to the transconductance of the input device and the total parallel output resistance at the drain node.\n\n#### B. Output Resistance ($R_{out}$)\nThe output resistance is found by grounding the input ($V_{in} = 0$) and looking into the output node.\n*   Looking up into the drain of $M_1$, we see $r_{o1}$.\n*   Looking down into the drain of $M_2$ (with its source grounded), we see $r_{o2}$.\nTherefore, the total output resistance is simply the parallel combination of the two:\n$$R_{out} = r_{o1} \\parallel r_{o2}$$\n\n#### C. Input Resistance ($R_{in}$)\nThe input resistance is found by looking into the source of $M_2$. A key characteristic of a common-gate amplifier is its relatively low input impedance. However, the presence of the output resistance $r_{o2}$ and the load $r_{o1}$ complicates it slightly.\n\nThe exact formula is:\n$$R_{in} = \\frac{r_{o1} + r_{o2}}{1 + (g_{m2} + g_{mb2})r_{o2}}$$\n\n**Approximation:** Dividing the numerator and denominator by $r_{o2}$ and assuming $(g_{m2} + g_{mb2})r_{o2} \\gg 1$:\n$$R_{in} \\approx \\frac{1 + \\frac{r_{o1}}{r_{o2}}}{g_{m2} + g_{mb2}}$$\nIf the load $r_{o1}$ is comparable to $r_{o2}$, the input resistance is roughly $\\frac{2}{g_{m2}}$. If the load were an ideal current source ($r_{o1} \\to \\infty$), the input resistance would also become very large.\n\n### Summary of Characteristics\n*   **Topology:** Common-Gate with PMOS Active Load.\n*   **Function:** Voltage amplifier or current buffer.\n*   **Voltage Gain:** Moderate to High, Non-inverting ($\\approx g_m R_{out}$).\n*   **Input Impedance:** Low ($\\approx 1/g_m$, but dependent on the load).\n*   **Output Impedance:** High ($r_{o1} \\parallel r_{o2}$).\n*   **Typical Use:** Often used as a current buffer (taking a current input and passing it to a high-impedance output) or as the second stage in a cascode amplifier to improve high-frequency response by eliminating the Miller effect.",
        "format": "markdown",
        "sha256": "fd6425df59f1a4b870080fe0dfb87fb9b479e2d2e01e74dd40c56305120a5c5a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, and gives the non-inverting gain and low input resistance. Its gain expression is equivalent to the golden result; the additional analysis is consistent with the topology.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 13318,
        "total_tokens": 15538,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10401,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 6707,
        "total_tokens": 7817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5321,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, we can determine the number of poles by identifying the number of independent nodes with capacitance in the small-signal equivalent circuit.\n\n1.  **Identify the independent nodes:**\n    *   **Node 1 (Input Node):** The gate of transistor $M_1$.\n    *   **Node 2 (Output Node):** The drain of transistor $M_1$ (which is also the drain of $M_2$), labeled as $V_{\\text{out}}$.\n\n2.  **Analyze the capacitances at each node:**\n    *   At **Node 1**, we have the gate-to-source capacitance **$C_{\\text{GS}}$** connected to ground, and the gate-to-drain capacitance **$C_{\\text{GD}}$** connected to Node 2.\n    *   At **Node 2**, we have the drain-to-bulk capacitance **$C_{\\text{DB}}$** connected to ground. Additionally, from the active load $M_2$, we have **$C_{\\text{GD2}}$** and **$C_{\\text{DB2}}$**. Since the gate and source/bulk of $M_2$ are at AC ground, both $C_{\\text{GD2}}$ and $C_{\\text{DB2}}$ effectively act as capacitances from Node 2 to ground.\n\n3.  **Determine the system order:**\n    *   The circuit has **two** independent nodes where charge can be stored (the gate of $M_1$ and the drain of $M_1$).\n    *   All the capacitors can be grouped into an equivalent capacitance at Node 1, an equivalent capacitance at Node 2, and a coupling capacitance ($C_{\\text{GD}}$) between them.\n    *   Because there are two independent nodes with associated capacitances, the transfer function of this circuit will have a denominator polynomial of degree 2 ($s^2$).\n\nA second-order system has exactly **2 poles**.",
        "format": "markdown",
        "sha256": "3e5e2d8080d0ef8a0a766296055e4494353d4f2c041ba1253fbcd0fd10b13fc4"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the gate and output as the two independent capacitive nodes and assigns the capacitors to the appropriate nodes, giving two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2184,
        "output_tokens": 6066,
        "total_tokens": 8250,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5099,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 2475,
        "total_tokens": 3567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, we can determine the number of poles by identifying the number of independent nodes with capacitance (which corresponds to the number of independent energy storage elements).\n\n1.  **Identify the nodes with capacitance:**\n    *   **Node 1 (Input Node):** The gate of transistor $M_1$. The capacitors connected to this node are $C_{GS}$ (to ground) and $C_{GD}$ (to the output node).\n    *   **Node 2 (Output Node):** The drain of transistors $M_1$ and $M_2$ ($V_{\\text{out}}$). The capacitors connected to this node are $C_{GD}$ (to the input node), $C_{DB}$ (to ground), $C_{GD2}$ (to AC ground, as the gate of $M_2$ is grounded), and $C_{DB2}$ (to AC ground).\n\n2.  **Determine independence:**\n    *   The capacitors at the output node ($C_{DB}$, $C_{GD2}$, $C_{DB2}$) can be lumped together into a single equivalent output capacitance because they are all connected between the output node and ground (or AC ground).\n    *   The capacitor $C_{GS}$ is connected between the input node and ground.\n    *   The capacitor $C_{GD}$ connects the input and output nodes.\n    *   Because there are two distinct, independent nodes (the gate of $M_1$ and the drain of $M_1$) whose voltages dictate the state of the capacitors, this forms a second-order system.\n\nA second-order system has **2** poles.",
        "format": "markdown",
        "sha256": "545791ec3f567c85d29e7c2dd9cadf4467c649e5f5ca4ab42b707183e4261049"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent capacitive nodes—the M1 gate and output—and assigns the relevant capacitors to them, yielding two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2184,
        "output_tokens": 5088,
        "total_tokens": 7272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4317,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 2613,
        "total_tokens": 3705,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2261,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, we can determine the number of poles by identifying the number of independent nodes that have capacitance associated with them in the small-signal equivalent circuit.\n\n1.  **Identify the independent nodes:**\n    *   **Node 1 (Input Node):** The gate of transistor $M_1$. It has capacitance $C_{GS}$ to ground and $C_{GD}$ connecting it to the output node.\n    *   **Node 2 (Output Node):** The drain of $M_1$ and $M_2$ ($V_{\\text{out}}$). It has capacitances $C_{\\text{DB}}$, $C_{\\text{DB2}}$, and $C_{\\text{GD2}}$ effectively connected to ground (since the gate and source of $M_2$ are at AC ground), plus $C_{GD}$ connecting it back to Node 1.\n\n2.  **Count the poles:**\n    *   The number of poles in a circuit is generally equal to the number of independent energy-storing elements (capacitors, in this case) that cannot be combined in parallel or series, which corresponds to the number of independent nodes with capacitance.\n    *   Since there are **two** such independent nodes (the gate of $M_1$ and the drain of $M_1$/$M_2$), the transfer function will have a second-order denominator polynomial ($s^2$).\n\nTherefore, the circuit has **2** poles.",
        "format": "markdown",
        "sha256": "883b6d9ee9c76d3ab07138e5831ef57d687315cd821097712343a649c13f3fdd"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the gate of M1 and the output as the two capacitively loaded nodes, assigns the listed capacitances to the right nodes, and concludes there are two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2184,
        "output_tokens": 4611,
        "total_tokens": 6795,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3881,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 2136,
        "total_tokens": 3228,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1825,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its structure, operation, and characteristics.\n\n### 1. Circuit Identification\nThe circuit is a modified **Common-Source (CS) Amplifier**.\n*   It consists of two N-channel MOSFETs ($M_1$ and $M_2$) connected in series.\n*   The gates of both transistors are tied together and connected to the input voltage ($V_{in}$).\n*   A drain resistor ($R_D$) connects the drain of $M_2$ to the positive supply voltage ($V_{DD}$).\n*   The output ($V_{out}$) is taken from the drain of $M_2$.\n\n### 2. DC Analysis & Operating Regions (Large Signal)\nThe most critical part of analyzing this circuit is determining the region of operation for each transistor. A common mistake is assuming both can be in saturation simultaneously.\n\nLet's define the node between $M_1$ and $M_2$ (drain of $M_1$, source of $M_2$) as **$V_X$**.\n*   **Gate-Source Voltages:**\n    *   $V_{GS1} = V_{in}$\n    *   $V_{GS2} = V_{in} - V_X$\n\nFor the circuit to amplify, both transistors must be turned ON, meaning $V_{in} > V_{th}$ (assuming they have the same threshold voltage, $V_{th}$).\n\n**Why they cannot both be in saturation:**\n*   For $M_1$ to be in saturation, its drain voltage must be high enough: $V_{DS1} \\ge V_{GS1} - V_{th} \\implies \\mathbf{V_X \\ge V_{in} - V_{th}}$.\n*   However, if $V_X \\ge V_{in} - V_{th}$, let's look at $M_2$'s gate-source voltage:\n    $V_{GS2} = V_{in} - V_X \\le V_{in} - (V_{in} - V_{th}) \\implies \\mathbf{V_{GS2} \\le V_{th}}$.\n*   If $V_{GS2} \\le V_{th}$, transistor $M_2$ would be turned OFF (or in subthreshold), preventing any significant current from flowing.\n\n**Conclusion on Operating Regions:**\nFor the amplifier to work and conduct current, $V_X$ must be small enough to keep $M_2$ ON. Therefore, $V_X < V_{in} - V_{th}$.\n*   **$M_1$ operates in the Triode (Linear) region.** It acts somewhat like a voltage-controlled resistor.\n*   **$M_2$ operates in the Saturation region** (provided $V_{out}$ is high enough, specifically $V_{out} \\ge V_{in} - V_{th}$).\n\n### 3. The \"Composite Transistor\" Concept\nIn Integrated Circuit (IC) design, two identical MOSFETs connected in series with their gates tied together behave exactly like a **single equivalent MOSFET** with a longer channel.\n\nIf $M_1$ and $M_2$ have the same width ($W$) and length ($L$):\n*   **Equivalent Width:** $W_{eq} = W$\n*   **Equivalent Length:** $L_{eq} = L_1 + L_2 = 2L$\n\nThis composite transistor will have a lower transconductance ($g_m$) and a higher output resistance ($r_o$) compared to a single transistor of length $L$.\n\n### 4. AC Analysis (Small Signal)\nTo find the voltage gain ($A_v = v_{out} / v_{in}$), we can look at it in two ways:\n\n**Method A: Using the Composite Transistor Model (Simpler)**\nTreating $M_1$ and $M_2$ as a single device ($M_{eq}$), the circuit is just a standard Common-Source amplifier.\n*   Voltage Gain: $A_v \\approx -G_{m,eq} \\times (R_D \\parallel R_{o,eq})$\n*   Assuming $R_D$ is much smaller than the transistor's output resistance ($R_{o,eq}$), the gain simplifies to:\n    $$A_v \\approx -G_{m,eq} R_D$$\n*(Note: $G_{m,eq}$ will be lower than the $g_m$ of a single transistor due to the effectively doubled channel length).*\n\n**Method B: Detailed Small-Signal Analysis**\nIf we analyze them separately, knowing $M_1$ is in triode (acting as a resistor $r_{ds1}$) and $M_2$ is in saturation (with transconductance $g_{m2}$):\n1.  The small-signal current $i_d$ is controlled by $M_2$: $i_d \\approx g_{m2} v_{gs2} = g_{m2}(v_{in} - v_x)$\n2.  The voltage at the middle node $v_x$ is created by this current flowing through $M_1$'s channel resistance: $v_x = i_d \\times r_{ds1}$\n3.  Substituting $v_x$: $i_d = g_{m2}(v_{in} - i_d r_{ds1})$\n4.  Solving for effective transconductance ($G_m = i_d / v_{in}$):\n    $$G_m = \\frac{g_{m2}}{1 + g_{m2}r_{ds1}}$$\n5.  The output voltage is $v_{out} = -i_d R_D$. Therefore, the gain is:\n    $$A_v = \\frac{v_{out}}{v_{in}} = -G_m R_D = -\\frac{g_{m2} R_D}{1 + g_{m2}r_{ds1}}$$\nThis formula shows that $M_1$ acts as **source degeneration** for $M_2$, reducing the overall gain of the amplifier.\n\n### Summary / Why use this circuit?\n1.  **Increased Channel Length:** It is a layout technique used in IC design to create a transistor with a very long effective channel length ($L$) when design rules might restrict the maximum length of a single drawn transistor.\n2.  **Reduced Gain/Transconductance:** By acting as a degenerated device, it intentionally lowers the gain, which is sometimes required for stability or specific biasing circuits.\n3.  **Educational Tool:** It is a classic circuit used to test a designer's understanding of MOSFET operating regions, specifically the trap of assuming all series transistors are in saturation.",
        "format": "markdown",
        "sha256": "3bff5ab832cd90a565a459a1ee9e12360eff3c5183d9b0543410d093a64e4d2b"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stack, with M1 in triode and M2 saturated, and concludes that it behaves approximately like a device with channel length L1 + L2. The added small-signal gain analysis is simplified, but does not undermine the essential conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2236,
        "output_tokens": 14128,
        "total_tokens": 16364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 6812,
        "total_tokens": 7930,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5340,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification and Overview\nThe circuit is a variation of a **Common-Source (CS) Amplifier** (in an analog context) or an **Inverter** (in a digital context).\n*   **Components:** It consists of two N-channel MOSFETs ($M_1$ and $M_2$) and a drain resistor ($R_D$).\n*   **Connections:**\n    *   The input voltage ($V_{in}$) is connected to the gates of **both** $M_1$ and $M_2$.\n    *   $M_1$ and $M_2$ are connected in series (the drain of $M_1$ connects to the source of $M_2$).\n    *   The source of $M_1$ is grounded.\n    *   The drain of $M_2$ is connected to $R_D$, which goes to the supply voltage ($V_{DD}$).\n    *   The output ($V_{out}$) is taken from the drain of $M_2$.\n\n### 2. Key Insight: The \"Composite Transistor\"\nThe most important feature of this circuit is the series connection of $M_1$ and $M_2$ with their gates tied together. In IC design, this configuration is treated as a single **composite transistor**.\n\nIf we assume $M_1$ and $M_2$ have the same width ($W$) and length ($L$), placing them in series effectively creates a single transistor with the same width but **twice the channel length** ($2L$).\n*   **Equivalent Aspect Ratio:** $(W/L)_{eq} = \\frac{W}{L_1 + L_2}$\n*   If $M_1$ and $M_2$ are identical: $(W/L)_{eq} = \\frac{W}{2L} = \\frac{1}{2} (W/L)_{single}$\n\nThis means the two transistors together will conduct half the current of a single transistor of the same size for a given gate voltage.\n\n### 3. Operating Regions (DC Analysis)\nLet's define the intermediate node between $M_1$ and $M_2$ as $V_x$. For the circuit to operate as an amplifier, the composite transistor must be in the saturation region. Let's look at the individual transistors:\n\n*   **$M_2$ (Top Transistor):** For $M_2$ to be ON, its gate-to-source voltage must be greater than the threshold voltage ($V_{th}$).\n    $V_{GS2} = V_{in} - V_x > V_{th} \\implies V_x < V_{in} - V_{th}$\n*   **$M_1$ (Bottom Transistor):** For $M_1$ to be in saturation, its drain-to-source voltage must be greater than its overdrive voltage.\n    $V_{DS1} \\ge V_{GS1} - V_{th} \\implies V_x \\ge V_{in} - V_{th}$\n\nNotice that the condition for $M_1$ to be in saturation ($V_x \\ge V_{in} - V_{th}$) directly contradicts the condition for $M_2$ to even be turned ON ($V_x < V_{in} - V_{th}$).\n**Conclusion:** When this circuit is operating normally, **$M_1$ is always forced into the triode (linear) region**, while **$M_2$ operates in the saturation region**. Together, they mimic a single long-channel transistor in saturation.\n\n### 4. AC Analysis (Small-Signal)\nTreating $M_1$ and $M_2$ as a single equivalent transistor ($M_{eq}$), we can analyze it like a standard common-source amplifier.\n\n*   **Transconductance ($g_{m,eq}$):** Because the effective length is doubled, the transconductance is reduced compared to a single transistor.\n    $g_{m,eq} = \\sqrt{2 \\mu_n C_{ox} (W/2L) I_D} = \\frac{1}{\\sqrt{2}} g_{m,single}$\n*   **Voltage Gain ($A_v$):** The small-signal voltage gain is given by the standard formula:\n    $A_v = \\frac{v_{out}}{v_{in}} \\approx -g_{m,eq} (R_D \\parallel r_{o,eq})$\n    *(Where $r_{o,eq}$ is the output resistance of the composite transistor, which is generally higher than a single transistor due to the increased effective length).*\n\n### 5. Practical Applications: Why use this circuit?\n\n**In Analog Design:**\n*   **Increasing Output Resistance:** By effectively doubling the channel length, the channel-length modulation effect is reduced, which increases the output resistance ($r_o$) of the device.\n*   **Layout Constraints:** Sometimes a designer needs a very long transistor (to reduce gain or current) but the layout rules or geometry make drawing one long transistor difficult. Stacking two standard-sized transistors achieves the same electrical result.\n\n**In Digital Design (as an Inverter):**\n*   **Weak Pull-Down:** If this is used as a logic gate, it acts as an inverter. When $V_{in}$ is HIGH, the output is pulled LOW. Using two transistors in series creates a \"weaker\" pull-down network (higher resistance to ground) than a single transistor. This is sometimes done intentionally in specific logic families (like pseudo-NMOS) or SRAM cells to balance drive strengths without violating minimum transistor size rules in the manufacturing process.",
        "format": "markdown",
        "sha256": "cc4213e910c55fa3c3b1aaa28029adbc160cd4dd1c9abbba076b812499bb0e8e"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS pair, explains that M1 is in triode while M2 is saturated, and gives the key result that equal devices behave approximately like one transistor with twice the channel length. Minor peripheral claims do not undermine the essential analysis.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2236,
        "output_tokens": 14246,
        "total_tokens": 16482,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 6190,
        "total_tokens": 7308,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its structure, operation, and characteristics.\n\n### 1. Circuit Identification\nThe circuit is a **Common-Source Amplifier** with a resistive load ($R_D$). However, instead of a single driving transistor, it uses two NMOS transistors ($M_1$ and $M_2$) connected in series with their gates tied together to the input $V_{in}$. \n\nThis specific two-transistor configuration is often referred to as a **\"Composite Transistor\"**, a **\"Split-Length Transistor\"**, or a **\"Self-Cascode\"** structure.\n\n### 2. DC / Large-Signal Analysis\nTo understand how this circuit works, we must determine the operating regions of $M_1$ and $M_2$. Let's assume both transistors have the same threshold voltage ($V_{TH}$) and width ($W$), but potentially different lengths ($L_1$ and $L_2$). Let the node between them be $V_x$ (the drain of $M_1$ and source of $M_2$).\n\n*   **The State of $M_1$:** For the circuit to act as an amplifier, current must flow, meaning $M_2$ must be ON. \n    *   For $M_2$ to be ON, its gate-to-source voltage must be greater than the threshold: $V_{GS2} > V_{TH}$.\n    *   Since $V_{GS2} = V_{in} - V_x$, this means $V_{in} - V_x > V_{TH}$, which rearranges to **$V_x < V_{in} - V_{TH}$**.\n    *   Now look at $M_1$. Its drain-to-source voltage is $V_{DS1} = V_x$. Its overdrive voltage is $V_{GS1} - V_{TH} = V_{in} - V_{TH}$.\n    *   Because we just established that $V_x < V_{in} - V_{TH}$, it means **$V_{DS1} < V_{GS1} - V_{TH}$**.\n    *   **Conclusion:** For the circuit to operate normally, **$M_1$ is always forced into the triode (linear) region.**\n\n*   **The State of $M_2$:** $M_2$ can be in saturation or triode depending on the output voltage $V_{out}$. For high-gain amplification, $M_2$ operates in the **saturation region**.\n\n*   **The \"Composite Transistor\" Equivalence:** \n    A fascinating property of this circuit is that the series combination of $M_1$ (in triode) and $M_2$ (in saturation) behaves almost exactly like a **single, longer transistor**. \n    If we do the math equating the currents ($I_{D1} = I_{D2}$), it can be proven that the two transistors act as one equivalent transistor ($M_{eq}$) with an effective length equal to the sum of their individual lengths:\n    $$L_{eq} = L_1 + L_2$$\n    Therefore, the equivalent transconductance parameter is:\n    $$\\beta_{eq} = \\mu_n C_{ox} \\frac{W}{L_1 + L_2}$$\n    The DC drain current (when $M_2$ is in saturation) is simply:\n    $$I_D \\approx \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L_1 + L_2} (V_{in} - V_{TH})^2$$\n\n### 3. Small-Signal (AC) Analysis\nBecause the $M_1$-$M_2$ pair acts as a single equivalent transistor, we can analyze the small-signal performance using standard common-source formulas, substituting the properties of the composite device.\n\n*   **Transconductance ($G_m$):**\n    The effective transconductance of the circuit is lower than that of a single transistor of length $L_1$ because of the increased effective channel length.\n    $$G_m = \\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L_1 + L_2}\\right) I_D}$$\n\n*   **Output Resistance ($R_{out}$):**\n    Looking into the output node, we see the load resistor $R_D$ in parallel with the output resistance of the composite transistor ($r_{o,eq}$).\n    $$R_{out} = R_D \\parallel r_{o,eq}$$\n    *(Note: $r_{o,eq}$ is roughly proportional to $L_1 + L_2$, making it higher than the output resistance of a single short transistor).*\n\n*   **Voltage Gain ($A_v$):**\n    The small-signal voltage gain is the product of the transconductance and the output resistance:\n    $$A_v = \\frac{v_{out}}{v_{in}} = -G_m R_{out} = -G_m (R_D \\parallel r_{o,eq})$$\n    If $R_D$ is much smaller than $r_{o,eq}$, the gain simplifies to:\n    $$A_v \\approx -G_m R_D$$\n\n### 4. Why use this circuit?\nYou might wonder why a designer would use two transistors instead of just drawing one long transistor.\n1.  **Layout Constraints:** In some older semiconductor manufacturing processes, there were strict rules on the maximum length a single transistor could be drawn. Putting them in series bypassed this rule.\n2.  **Short-Channel Effects:** By splitting a short-channel device into two, designers can mitigate certain non-ideal behaviors (like Drain-Induced Barrier Lowering - DIBL) that plague very small transistors, effectively creating a better-behaved \"long\" transistor.\n3.  **Analog Matching:** It is sometimes easier to match multiple identical unit transistors in a layout than to match one short transistor with one very long transistor.",
        "format": "markdown",
        "sha256": "feb61f466af5d7f01ff5326ca104007ee41ac112d8702de4d70e6fc471f3281c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS pair, places M1 in triode and M2 in saturation, and gives the essential longer-effective-channel result, L_eff ≈ L1 + L2. The small-signal treatment is consistent with that approximation.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2236,
        "output_tokens": 14906,
        "total_tokens": 17142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12310,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 9751,
        "total_tokens": 10869,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8435,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is a **MOSFET Differential Amplifier** configured for **single-ended input** and **single-ended output**.\n*   **Differential Pair:** Transistors $M_1$ and $M_2$ form the core differential pair, sharing a common source connection.\n*   **Single-Ended Input:** The input signal ($V_{in}$) is applied to the gate of $M_1$, while the gate of $M_2$ is connected to a constant DC bias voltage ($V_b$).\n*   **Single-Ended Output:** The output signal ($V_{out}$) is taken from the drain of $M_2$ only. The drain of $M_1$ is tied directly to the power supply ($V_{DD}$).\n\n### 2. Component Functions\n*   **$M_1$ & $M_2$:** N-channel MOSFETs acting as the active amplifying devices. They are typically assumed to be matched (identical characteristics).\n*   **$I_1$:** An ideal DC current source (often called the \"tail current\"). It biases the transistors and ensures the sum of the currents through $M_1$ and $M_2$ remains constant ($I_{D1} + I_{D2} = I_1$).\n*   **$R_D$:** The drain resistor for $M_2$. It converts the current variations in $M_2$ into the output voltage variations.\n*   **$V_{DD}$:** The positive power supply rail.\n*   **$V_b$:** A fixed DC bias voltage that sets the operating point for the right side of the pair.\n\n### 3. Qualitative Analysis (How it works)\nYou can understand this circuit's operation by looking at how current steers between the two branches:\n\n1.  **DC State (Quiescent Point):** If $V_{in}$ is at a DC level equal to $V_b$, the circuit is balanced. The tail current $I_1$ splits equally: $I_{D1} = I_{D2} = I_1 / 2$. The DC output voltage is $V_{out} = V_{DD} - (I_1 / 2) \\cdot R_D$.\n2.  **Applying a Positive Signal:** If $V_{in}$ increases, the gate-to-source voltage ($V_{GS}$) of $M_1$ increases, causing $M_1$ to conduct more current ($I_{D1}$ increases).\n3.  **Current Steering:** Because the total tail current $I_1$ is fixed, an increase in $I_{D1}$ forces a corresponding *decrease* in $I_{D2}$ ($M_2$'s drain current).\n4.  **Output Voltage:** As $I_{D2}$ decreases, the voltage drop across the resistor $R_D$ ($I_{D2} \\cdot R_D$) decreases. Since $V_{out} = V_{DD} - I_{D2}R_D$, a smaller drop means $V_{out}$ **increases**.\n\n**Conclusion:** An increase in $V_{in}$ leads to an increase in $V_{out}$. Therefore, this configuration acts as a **non-inverting amplifier**.\n\n*Alternative Perspective:* The circuit can be viewed as a two-stage amplifier: $M_1$ acts as a **Common-Drain** amplifier (source follower) that buffers the input and drives the source of $M_2$. $M_2$ then acts as a **Common-Gate** amplifier, taking the signal at its source and amplifying it to its drain.\n\n### 4. Quantitative Small-Signal Analysis (Voltage Gain)\nLet's derive the small-signal voltage gain ($A_v = v_{out} / v_{in}$).\n*Assumptions:* Transistors are matched ($g_{m1} = g_{m2} = g_m$), and we will ignore channel-length modulation ($r_o \\approx \\infty$) for a simplified first-order analysis.\n\n1.  **Find the common source voltage ($v_s$):**\n    Applying Kirchhoff's Current Law (KCL) at the common source node. The sum of small-signal AC currents must be zero because the ideal current source $I_1$ acts as an open circuit to AC signals.\n    $$i_{s1} + i_{s2} = 0$$\n    $$-g_m(v_{in} - v_s) - g_m(0 - v_s) = 0$$\n    $$-g_m v_{in} + g_m v_s + g_m v_s = 0$$\n    $$2 g_m v_s = g_m v_{in}$$\n    $$v_s = \\frac{v_{in}}{2}$$\n    *(This shows the source node follows exactly half of the input signal).*\n\n2.  **Find the output voltage ($v_{out}$):**\n    The output voltage is determined by the AC current flowing through $R_D$, which is the drain current of $M_2$.\n    $$i_{d2} = g_m v_{gs2} = g_m(0 - v_s) = -g_m v_s$$\n    $$v_{out} = -i_{d2} \\cdot R_D = -(-g_m v_s) \\cdot R_D = g_m v_s R_D$$\n\n3.  **Calculate Voltage Gain ($A_v$):**\n    Substitute $v_s$ into the $v_{out}$ equation:\n    $$v_{out} = g_m \\left(\\frac{v_{in}}{2}\\right) R_D$$\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{1}{2} g_m R_D$$\n\n### 5. Summary of Characteristics\n*   **Voltage Gain:** $A_v = +\\frac{1}{2} g_m R_D$ (It is exactly half the gain of a fully differential output pair).\n*   **Phase:** Non-inverting ($0^\\circ$ phase shift between input and output).\n*   **Input Impedance:** Very high (determined by the gate oxide of MOSFET $M_1$).\n*   **Output Impedance:** Approximately equal to $R_D$ (or $R_D \\parallel r_{o2}$ if channel-length modulation is considered).",
        "format": "markdown",
        "sha256": "b4a3dd1ce6397a364095669e0d7feb37e41491c1f53a95de585046dc3ba35629"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair (equivalently, a source follower driving a common-gate stage) and derives the non-inverting gain, approximately +gmRD/2 for matched devices.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 8539,
        "total_tokens": 10759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5760,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 4154,
        "total_tokens": 5264,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is a **single-ended input, single-ended output differential amplifier**. It is built using an NMOS differential pair ($M_1$ and $M_2$) biased by a tail current source ($I_1$).\n\nUnlike a fully symmetric differential amplifier, this specific configuration is asymmetric in its connections:\n*   **Input:** The signal $V_{in}$ is applied only to the gate of $M_1$. The gate of $M_2$ is connected to a constant DC bias voltage, $V_b$.\n*   **Output:** The output $V_{out}$ is taken only from the drain of $M_2$. The drain of $M_1$ is tied directly to the power supply ($V_{DD}$), meaning it has no load resistor.\n\n### 2. Qualitative Operation (Signal Path)\nTo understand how the circuit amplifies the signal, we can break it down into two cascaded stages:\n\n1.  **$M_1$ acts as a Source Follower (Common-Drain):**\n    When the input voltage $V_{in}$ increases, the transistor $M_1$ turns on harder. This pulls the voltage at the common source node (the node above $I_1$) *up*. Because it acts as a source follower, the voltage change at the common source node closely tracks the change at $V_{in}$ (though slightly attenuated).\n2.  **$M_2$ acts as a Common-Gate Amplifier:**\n    The gate of $M_2$ is held at a constant AC ground ($V_b$). The signal from $M_1$ is fed into the *source* of $M_2$. As the common source voltage goes *up*, the gate-to-source voltage ($V_{gs}$) of $M_2$ goes *down* (since $V_g$ is fixed). A lower $V_{gs}$ means less drain current flows through $M_2$.\n3.  **Output Generation:**\n    With less current flowing through $M_2$, there is a smaller voltage drop across the load resistor $R_D$. Since $V_{out} = V_{DD} - (I_{D2} \\cdot R_D)$, a smaller drop means $V_{out}$ goes *up*.\n\n**Conclusion:** An increase in $V_{in}$ leads to an increase in $V_{out}$. Therefore, this is a **non-inverting amplifier**.\n\n---\n\n### 3. Quantitative Small-Signal Analysis\nLet's derive the voltage gain ($A_v = v_{out} / v_{in}$).\n*Assumptions:* Both transistors are in saturation, are perfectly matched ($g_{m1} = g_{m2} = g_m$), and we will ignore channel-length modulation ($r_o \\approx \\infty$) for simplicity. $V_{DD}$ and $V_b$ act as AC grounds.\n\n1.  **Find the voltage at the common source node ($v_s$):**\n    Apply Kirchhoff's Current Law (KCL) at the common source node. The sum of AC currents from $M_1$ and $M_2$ must equal zero because the ideal tail current source $I_1$ has infinite AC impedance.\n    *   Current from $M_1$: $i_{s1} = g_m \\cdot v_{gs1} = g_m(v_{in} - v_s)$\n    *   Current from $M_2$: $i_{s2} = g_m \\cdot v_{gs2} = g_m(0 - v_s) = -g_m \\cdot v_s$\n\n    Set the sum to zero:\n    $$g_m(v_{in} - v_s) - g_m \\cdot v_s = 0$$\n    $$g_m \\cdot v_{in} - 2g_m \\cdot v_s = 0$$\n    $$v_s = \\frac{v_{in}}{2}$$\n    *(This shows the source node tracks the input with a gain of 0.5).*\n\n2.  **Find the output voltage ($v_{out}$):**\n    The AC current flowing through $M_2$ and the resistor $R_D$ is $i_{d2}$.\n    $$i_{d2} = g_m \\cdot v_{gs2} = g_m(0 - v_s) = -g_m \\cdot v_s$$\n    Substitute $v_s = v_{in}/2$:\n    $$i_{d2} = -g_m \\left(\\frac{v_{in}}{2}\\right)$$\n\n    The output voltage is the voltage drop across $R_D$ caused by this current (flowing from ground up to the drain):\n    $$v_{out} = -i_{d2} \\cdot R_D$$\n    $$v_{out} = -\\left(-g_m \\frac{v_{in}}{2}\\right) R_D$$\n    $$v_{out} = \\frac{1}{2} g_m R_D \\cdot v_{in}$$\n\n3.  **Voltage Gain ($A_v$):**\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\mathbf{+\\frac{1}{2} g_m R_D}$$\n\n### 4. Key Characteristics Summary\n*   **Voltage Gain:** $\\approx \\frac{1}{2} g_m R_D$. It provides exactly half the gain of a standard common-source amplifier.\n*   **Phase:** Non-inverting (positive gain).\n*   **Input Impedance:** Very high ($\\infty$ at low frequencies), as the input is connected directly to the MOSFET gate.\n*   **Output Impedance:** Approximately equal to $R_D$ (assuming $R_D \\ll r_o$).\n*   **Advantage:** Compared to a simple common-source amplifier, this topology offers better isolation between the input and output, reducing the Miller effect, which can result in better high-frequency performance.",
        "format": "markdown",
        "sha256": "39e94566de7faf059021a6fb4b136eb2e1450d694398aeef1bbf004958b5b99e"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower/common-gate (equivalently, single-ended differential-pair) topology, traces the signal path, and derives the non-inverting gain of approximately $g_mR_D/2$ for matched devices.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2220,
        "output_tokens": 9810,
        "total_tokens": 12030,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6899,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 4385,
        "total_tokens": 5495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3038,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is a variation of a **MOSFET differential pair** (or source-coupled pair). However, it is configured for **single-ended input and single-ended output**.\n*   **Input:** The signal $V_{in}$ is applied to the gate of $M_1$, while the gate of $M_2$ is held at a constant DC bias voltage, $V_b$.\n*   **Output:** The output $V_{out}$ is taken only from the drain of $M_2$.\n*   Because there is no need to measure a voltage at the drain of $M_1$, it is tied directly to $V_{DD}$ to save headroom and components.\n\nFunctionally, this circuit acts as a **non-inverting voltage amplifier**. It can also be analyzed as a cascade of two stages: a **Common-Drain (Source Follower)** stage ($M_1$) driving a **Common-Gate** stage ($M_2$).\n\n### 2. Component Roles\n*   **$M_1$:** Acts as an input buffer (source follower). It transfers the input voltage variations to the common source node.\n*   **$M_2$:** Acts as a common-gate amplifier. It takes the signal from the common source node and amplifies it to the output node.\n*   **$I_1$:** An ideal DC current source that provides the tail bias current for the differential pair. It ensures the sum of the currents through $M_1$ and $M_2$ remains constant ($I_{D1} + I_{D2} = I_1$).\n*   **$R_D$:** The load resistor that converts the varying drain current of $M_2$ into the output voltage $V_{out}$.\n*   **$V_b$:** A constant DC bias voltage that sets the operating point for $M_2$.\n\n### 3. Qualitative Analysis (How it works)\nLet's trace what happens when the input voltage $V_{in}$ increases:\n1.  As $V_{in}$ goes **up**, the gate voltage of $M_1$ increases.\n2.  Because $M_1$ acts as a source follower, the voltage at the common source node (let's call it $V_S$) also goes **up**.\n3.  The gate of $M_2$ is fixed at $V_b$. Since $V_S$ increased, the gate-to-source voltage of $M_2$ ($V_{GS2} = V_b - V_S$) goes **down**.\n4.  A decrease in $V_{GS2}$ causes the drain current of $M_2$ ($I_{D2}$) to **decrease**. (Note: Because the total current $I_1$ is constant, the current through $M_1$ must increase by the same amount).\n5.  The output voltage is determined by the voltage drop across $R_D$: $V_{out} = V_{DD} - (I_{D2} \\cdot R_D)$.\n6.  Since $I_{D2}$ decreased, the voltage drop across $R_D$ decreases, causing $V_{out}$ to go **up**.\n\n**Conclusion:** An increase in $V_{in}$ leads to an increase in $V_{out}$. Therefore, this is a **non-inverting amplifier**.\n\n### 4. Quantitative Small-Signal Analysis (Voltage Gain)\nTo find the small-signal voltage gain ($A_v = v_{out} / v_{in}$), we use the small-signal model.\n*   **Assumptions:** Both transistors are in saturation. We will ignore channel-length modulation (assume $r_o = \\infty$) for a simplified, standard analysis. $V_{DD}$ and $V_b$ become AC grounds. The ideal current source $I_1$ becomes an AC open circuit.\n\nLet $g_{m1}$ and $g_{m2}$ be the transconductances of $M_1$ and $M_2$. Let $v_s$ be the AC voltage at the common source node.\n\n**Method 1: Nodal Analysis**\n1.  **At the common source node ($v_s$):** Apply Kirchhoff's Current Law (KCL). The sum of AC currents leaving the node is zero.\n    $$g_{m1}(v_s - v_{in}) + g_{m2}(v_s - 0) = 0$$\n    $$v_s(g_{m1} + g_{m2}) = g_{m1}v_{in}$$\n    $$v_s = v_{in} \\left( \\frac{g_{m1}}{g_{m1} + g_{m2}} \\right)$$\n    *(This shows the source follower action. If $g_{m1} = g_{m2}$, $v_s = v_{in}/2$)*\n\n2.  **At the output node ($v_{out}$):** The AC current flowing through $R_D$ is the same as the AC drain current of $M_2$.\n    $$v_{out} = -i_{d2} \\cdot R_D$$\n    The AC drain current of $M_2$ is $i_{d2} = g_{m2} \\cdot v_{gs2} = g_{m2}(0 - v_s) = -g_{m2}v_s$.\n    $$v_{out} = -(-g_{m2}v_s) \\cdot R_D = g_{m2} R_D v_s$$\n\n3.  **Calculate Total Gain:** Substitute $v_s$ from step 1 into step 2.\n    $$v_{out} = g_{m2} R_D \\left[ v_{in} \\left( \\frac{g_{m1}}{g_{m1} + g_{m2}} \\right) \\right]$$\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1} g_{m2} R_D}{g_{m1} + g_{m2}}$$\n\n**Special Case: Matched Transistors**\nIf $M_1$ and $M_2$ are identical and biased with the same DC current (meaning $V_{in, DC} = V_b$), then $g_{m1} = g_{m2} = g_m$.\n$$A_v = \\frac{g_m \\cdot g_m \\cdot R_D}{g_m + g_m} = \\frac{g_m^2 R_D}{2g_m}$$\n**$$A_v = \\frac{1}{2} g_m R_D$$**\n\n*(Note: This is exactly half the gain of a standard common-source amplifier, which makes sense as half the input voltage is \"lost\" at the common source node).*\n\n### 5. Summary of Characteristics\n*   **Topology:** Single-ended input, single-ended output differential pair (or Common-Drain to Common-Gate cascade).\n*   **Voltage Gain:** $A_v \\approx +\\frac{1}{2} g_m R_D$ (assuming matched transistors).\n*   **Phase:** Non-inverting (output is in phase with the input).\n*   **Input Impedance:** Very high ($\\approx \\infty$ at low frequencies), as the input is connected to the gate of a MOSFET.\n*   **Output Impedance:** Approximately equal to $R_D$ (ignoring the transistor's output resistance $r_o$).",
        "format": "markdown",
        "sha256": "366fadd7cf724dd47b5489360559d4f6e50bbb955c9ea826f4070aa62defcee5"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair as a source follower driving a common-gate stage, with M2 biased at Vb and output at its drain. The non-inverting signal path and gain expression are also correct.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2221,
        "output_tokens": 8931,
        "total_tokens": 11152,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 4717,
        "total_tokens": 5828,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3029,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed explanation of why the output impedance can be inductive.\n\n### 1. Circuit Identification\nThe circuit shown is a **Source Follower** (or Common Drain) amplifier.\n*   **$M_1$** is the amplifying transistor.\n*   **$M_2$** acts as an active load (a constant current source) biased by $V_b$.\n*   **$R_S$** is the source resistance of the input signal $V_{in}$.\n\n### 2. The Core Reason\nThe inductive output impedance is caused by the interaction between the **source resistance ($R_S$)** and the **gate-to-source parasitic capacitance ($C_{gs1}$)** of transistor $M_1$ at high frequencies.\n\n### 3. Small-Signal Analysis (The Math)\nTo find the output impedance ($Z_{out}$), we turn off the independent input source (set $V_{in} = 0$, making it an AC ground), apply a test voltage $v_x$ at the output node, and measure the resulting current $i_x$.\n\nLet's use a simplified high-frequency small-signal model for $M_1$, focusing only on the components that cause this effect: the transconductance ($g_{m1}$) and the gate-to-source capacitance ($C_{gs1}$). We will ignore the output resistances ($r_{o1}, r_{o2}$) for a moment to keep the math clear, as they only add parallel resistive damping and don't create the inductance.\n\n1.  **At the gate node ($v_g$):**\n    The gate is connected to AC ground through $R_S$ and to the output node ($v_x$) through $C_{gs1}$.\n    Using Kirchhoff's Current Law (KCL) at the gate:\n    $$\\frac{v_g}{R_S} + (v_g - v_x)sC_{gs1} = 0$$\n    Solving for $v_g$ in terms of $v_x$:\n    $$v_g \\left( \\frac{1}{R_S} + sC_{gs1} \\right) = v_x sC_{gs1}$$\n    $$v_g = v_x \\frac{sR_S C_{gs1}}{1 + sR_S C_{gs1}}$$\n\n2.  **At the output node ($v_x$):**\n    The test current $i_x$ enters the node. Current leaves the node through $C_{gs1}$ and through the transistor channel (dependent source $g_{m1}v_{gs}$).\n    Note that $v_{gs} = v_g - v_x$.\n    KCL at the output node:\n    $$i_x + g_{m1}(v_g - v_x) = (v_x - v_g)sC_{gs1}$$\n    $$i_x = (v_x - v_g)(g_{m1} + sC_{gs1})$$\n\n3.  **Substitute $v_g$ to find $Z_{out}$:**\n    First, find $(v_x - v_g)$:\n    $$v_x - v_g = v_x - v_x \\frac{sR_S C_{gs1}}{1 + sR_S C_{gs1}} = v_x \\left( \\frac{1}{1 + sR_S C_{gs1}} \\right)$$\n    Now substitute this into the $i_x$ equation:\n    $$i_x = v_x \\left( \\frac{1}{1 + sR_S C_{gs1}} \\right) (g_{m1} + sC_{gs1})$$\n    Finally, calculate $Z_{out} = \\frac{v_x}{i_x}$:\n    $$Z_{out}(s) = \\frac{1 + sR_S C_{gs1}}{g_{m1} + sC_{gs1}}$$\n\n### 4. Why is this Inductive?\nLet's rewrite the $Z_{out}$ equation in a standard pole-zero format:\n$$Z_{out}(s) = \\frac{1}{g_{m1}} \\cdot \\frac{1 + sR_S C_{gs1}}{1 + s\\frac{C_{gs1}}{g_{m1}}}$$\n\nFrom this equation, we can identify a zero and a pole:\n*   **Zero frequency:** $\\omega_z = \\frac{1}{R_S C_{gs1}}$\n*   **Pole frequency:** $\\omega_p = \\frac{g_{m1}}{C_{gs1}}$\n\nAn impedance is considered **inductive** if its magnitude increases with frequency (similar to an inductor where $Z = j\\omega L$). For the magnitude of this transfer function to increase with frequency, **the zero must occur before the pole** ($\\omega_z < \\omega_p$).\n\nLet's set up that inequality:\n$$\\frac{1}{R_S C_{gs1}} < \\frac{g_{m1}}{C_{gs1}}$$\n$$1 < g_{m1} R_S$$\n**$$R_S > \\frac{1}{g_{m1}}$$**\n\n**Conclusion:** If the source resistance $R_S$ is greater than the intrinsic low-frequency output impedance of the source follower ($1/g_{m1}$), the output impedance will increase with frequency, exhibiting inductive behavior.\n\n### 5. Intuitive Physical Explanation\nIf you don't want to rely solely on math, here is how to think about it physically:\n\n1.  **At Low Frequencies:** $C_{gs1}$ acts as an open circuit. The gate is at AC ground ($v_g = 0$). If you push a voltage $v_x$ into the output, the transistor sees a $v_{gs}$ of $-v_x$ and fights back with a current $g_{m1}v_x$. The impedance is simply **$1/g_{m1}$**.\n2.  **At High Frequencies:** $C_{gs1}$ acts as a short circuit. If you push a high-frequency voltage $v_x$ into the output, that voltage couples directly to the gate. Therefore, $v_g \\approx v_x$, meaning $v_{gs} \\approx 0$. Because $v_{gs}$ is zero, the transistor's dependent current source doesn't fight back. The test source is essentially just looking through the shorted $C_{gs1}$ directly at the resistor $R_S$. The impedance is **$R_S$**.\n\nIf **$R_S > 1/g_{m1}$**, the impedance transitions from a low value ($1/g_{m1}$) at low frequencies to a higher value ($R_S$) at high frequencies. An impedance that goes up as frequency goes up is, by definition, inductive.\n\n*(Note: In practical circuit design, this inductive output impedance can be problematic because if the source follower drives a capacitive load, the \"inductor\" and the load capacitor can form an LC tank, leading to ringing or instability in the circuit.)*",
        "format": "markdown",
        "sha256": "06b37b87642e29bbc0118a3b538e7d25d37f10510464584ebd73b913a781f6f6"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the output impedance. It explains the transition from about 1/gm1 at low frequency to RS at high frequency as Cgs1 couples the gate to the source, and correctly states that RS > 1/gm1 makes the impedance rise with frequency and appear inductive.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2164,
        "output_tokens": 11679,
        "total_tokens": 13843,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 5311,
        "total_tokens": 6393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3729,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is an explanation of why the output impedance can be inductive.\n\n### 1. Circuit Identification\nThe circuit shown is a **Source Follower** (or Common Drain) amplifier.\n*   **$M_1$** is the main amplifying transistor.\n*   **$M_2$** acts as an active load (a constant current source) biased by $V_b$.\n*   **$R_S$** is the source resistance of the input signal $V_{in}$.\n\n### 2. The Cause of Inductive Behavior\nAt low frequencies, the output impedance of a source follower is purely resistive and is approximately equal to $1/g_{m1}$ (ignoring the output resistances $r_o$ for simplicity).\n\nHowever, at higher frequencies, the parasitic capacitances of the transistor come into play. The inductive output impedance is caused by the interaction between:\n1.  The input source resistance **$R_S$**\n2.  The gate-to-source capacitance of $M_1$, **$C_{gs1}$**\n3.  The transconductance of $M_1$, **$g_{m1}$**\n\n### 3. Small-Signal Analysis\nTo find the output impedance ($Z_{out}$), we ground the input ($V_{in} = 0$) and apply a test voltage ($v_x$) at the output node, then measure the resulting current ($i_x$).\n\nLet's use a simplified high-frequency small-signal model focusing only on the components that cause this effect ($g_{m1}$, $C_{gs1}$, and $R_S$):\n\n1.  **At the gate node ($v_g$):** The voltage is determined by the voltage divider formed by $R_S$ and $C_{gs1}$ driven by the output voltage $v_x$.\n    $$v_g = v_x \\left( \\frac{R_S}{R_S + \\frac{1}{sC_{gs1}}} \\right) = v_x \\left( \\frac{sR_S C_{gs1}}{1 + sR_S C_{gs1}} \\right)$$\n\n2.  **The gate-to-source voltage ($v_{gs}$):**\n    $$v_{gs} = v_g - v_x = v_x \\left( \\frac{sR_S C_{gs1}}{1 + sR_S C_{gs1}} - 1 \\right) = v_x \\left( \\frac{-1}{1 + sR_S C_{gs1}} \\right)$$\n\n3.  **At the output node ($v_x$):** The total test current $i_x$ must equal the current flowing through $C_{gs1}$ plus the current from the dependent source $g_{m1}v_{gs}$ (flowing from drain to source, so it opposes $i_x$).\n    $$i_x = (v_x - v_g)sC_{gs1} - g_{m1}v_{gs}$$\n    Substitute $v_{gs} = v_g - v_x$:\n    $$i_x = -v_{gs}sC_{gs1} - g_{m1}v_{gs} = -v_{gs}(g_{m1} + sC_{gs1})$$\n\n4.  **Calculate $Z_{out}$:** Substitute the expression for $v_{gs}$ from step 2 into step 3:\n    $$i_x = - \\left[ v_x \\left( \\frac{-1}{1 + sR_S C_{gs1}} \\right) \\right] (g_{m1} + sC_{gs1})$$\n    $$Z_{out} = \\frac{v_x}{i_x} = \\frac{1 + sR_S C_{gs1}}{g_{m1} + sC_{gs1}}$$\n\n### 4. Why this equation represents an Inductor\nLet's rewrite the impedance equation in a standard pole-zero format:\n$$Z_{out}(s) = \\frac{1}{g_{m1}} \\cdot \\frac{1 + sR_S C_{gs1}}{1 + s\\frac{C_{gs1}}{g_{m1}}}$$\n\nThis transfer function has:\n*   A **low-frequency value** of $\\frac{1}{g_{m1}}$\n*   A **high-frequency value** of $R_S$ (as $s \\to \\infty$)\n*   A **zero** at frequency $\\omega_z = \\frac{1}{R_S C_{gs1}}$\n*   A **pole** at frequency $\\omega_p = \\frac{g_{m1}}{C_{gs1}}$\n\nFor an impedance to be considered **inductive**, its magnitude must *increase* as frequency increases (similar to an ideal inductor where $Z = j\\omega L$).\n\nLooking at our equation, the magnitude of $Z_{out}$ will increase with frequency if the zero occurs *before* the pole ($\\omega_z < \\omega_p$).\n$$\\frac{1}{R_S C_{gs1}} < \\frac{g_{m1}}{C_{gs1}}$$\n$$\\frac{1}{R_S} < g_{m1}$$\n**$$R_S > \\frac{1}{g_{m1}}$$**\n\n**Conclusion:** If the source resistance $R_S$ is greater than the intrinsic output resistance of the source follower ($1/g_{m1}$), the output impedance will rise with frequency between $\\omega_z$ and $\\omega_p$. This rising impedance characteristic is the definition of inductive behavior.\n\n### 5. Intuitive Explanation\n*   **At low frequencies:** $C_{gs1}$ acts as an open circuit. The gate is tied to AC ground through $R_S$. If the output voltage tries to change, the transistor's $V_{gs}$ changes fully, and the transistor fights back strongly with its transconductance ($g_m$). This results in a low impedance ($1/g_{m1}$).\n*   **At high frequencies:** $C_{gs1}$ acts more like a short circuit. If the output voltage changes rapidly, that change couples directly through $C_{gs1}$ to the gate. Because of $R_S$, the gate voltage is allowed to \"bounce\" and follow the output voltage.\n*   Because the gate voltage is following the source (output) voltage, the difference between them ($V_{gs}$) remains small.\n*   Since $V_{gs}$ is small, the transistor doesn't generate much current to fight the change at the output. It \"gives up\" its low-impedance characteristic, and the impedance looking into the node rises (eventually looking just like $R_S$).\n*   An impedance that starts low and goes high as frequency increases acts exactly like an inductor.",
        "format": "markdown",
        "sha256": "adfa6b933e08309b9d57b95c9f858e095d12a7d9a0a7f4e42f38b2cce9301fdb"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower, derives the stated output-impedance expression, and explains the transition from about 1/gm1 at low frequency to RS at high frequency. It correctly concludes that the impedance rises with frequency and is inductive when RS > 1/gm1.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2164,
        "output_tokens": 11469,
        "total_tokens": 13633,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8467,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 5225,
        "total_tokens": 6307,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3714,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the circuit is a **source follower** (or common-drain amplifier) formed by transistor $M_1$, with transistor $M_2$ acting as an active current source load.\n\nThe output impedance of this circuit can become inductive due to the interaction between the source resistance **$R_S$** and the parasitic gate-to-source capacitance **$C_{gs}$** of transistor $M_1$.\n\nHere is a detailed explanation of both the intuitive mechanism and the mathematical derivation.\n\n---\n\n### 1. Intuitive Explanation\n\nTo understand why the output looks inductive, we need to look at how the circuit responds to a change in voltage at the output node ($V_{out}$).\n\n*   **The \"Inertia\" of an Inductor:** An inductor opposes changes in current. If you apply a voltage step across an inductor, the current doesn't change instantly; it ramps up slowly. In other words, the current *lags* the voltage.\n*   **What happens in this circuit:** Imagine we try to force a sudden high-frequency voltage change at $V_{out}$.\n    1.  Because of the parasitic capacitance $C_{gs}$ between the gate and source of $M_1$, this sudden voltage change at the source ($V_{out}$) tries to couple directly to the gate.\n    2.  However, the gate is connected to the input through the resistor $R_S$. The combination of $R_S$ and $C_{gs}$ forms a low-pass filter (a time constant).\n    3.  Because of this $R_S C_{gs}$ delay, the gate voltage cannot change as fast as the source voltage. The gate voltage *lags* behind the source voltage.\n    4.  The current flowing through $M_1$ is controlled by the gate-to-source voltage ($V_{gs} = V_g - V_s$). Because $V_g$ is lagging behind $V_s$, the transistor's current response to the disturbance at the output is delayed.\n    5.  This delayed current response to a voltage change is the exact electrical characteristic of an **inductor**.\n\n### 2. Mathematical Derivation (Small-Signal Analysis)\n\nWe can prove this by finding the small-signal output impedance, $Z_{out}(s)$.\nTo find $Z_{out}$, we:\n1.  Set the input $V_{in}$ to AC ground.\n2.  Apply a test voltage $v_x$ at the output node.\n3.  Measure the resulting current $i_x$ flowing into the output node.\n4.  Calculate $Z_{out} = v_x / i_x$.\n\n**Assumptions for simplicity:**\n*   We will ignore the output resistances ($r_{o1}, r_{o2}$) of the transistors to focus purely on the reactive effects.\n*   We will focus on the dominant parasitic capacitance, $C_{gs}$ of $M_1$.\n\n**KCL at the output node (source of $M_1$):**\nThe test current $i_x$ entering the node must equal the sum of the currents leaving it. There are two paths for current to leave:\n1.  Up through the dependent current source of $M_1$: $-g_m v_{gs}$\n2.  Through the capacitor $C_{gs}$ towards the gate: $(v_x - v_g) \\cdot sC_{gs}$\n\nSo, $i_x = -g_m v_{gs} + (v_x - v_g)sC_{gs}$\nSince $v_{gs} = v_g - v_x$, we can rewrite this as:\n$$i_x = -g_m(v_g - v_x) + (v_x - v_g)sC_{gs}$$\n$$i_x = g_m(v_x - v_g) + sC_{gs}(v_x - v_g)$$\n$$i_x = (v_x - v_g)(g_m + sC_{gs}) \\quad \\text{--- (Equation 1)}$$\n\n**KCL at the gate node:**\nThe current flowing from the source through $C_{gs}$ must flow to ground through $R_S$.\n$$(v_x - v_g)sC_{gs} = \\frac{v_g}{R_S}$$\nSolving for $v_g$ in terms of $v_x$:\n$$v_x sC_{gs} = v_g \\left(sC_{gs} + \\frac{1}{R_S}\\right)$$\n$$v_g = v_x \\frac{sR_S C_{gs}}{1 + sR_S C_{gs}}$$\n\n**Substitute $v_g$ back into Equation 1:**\nFirst, find $(v_x - v_g)$:\n$$v_x - v_g = v_x - v_x \\frac{sR_S C_{gs}}{1 + sR_S C_{gs}} = v_x \\left( \\frac{1}{1 + sR_S C_{gs}} \\right)$$\n\nNow, substitute this into the $i_x$ equation:\n$$i_x = \\left[ v_x \\left( \\frac{1}{1 + sR_S C_{gs}} \\right) \\right] (g_m + sC_{gs})$$\n\nFinally, solve for $Z_{out} = v_x / i_x$:\n$$Z_{out}(s) = \\frac{1 + sR_S C_{gs}}{g_m + sC_{gs}}$$\n\n### 3. Analyzing the Result\n\nLet's rewrite the impedance equation in a standard pole-zero format:\n$$Z_{out}(s) = \\frac{1}{g_m} \\cdot \\frac{1 + sR_S C_{gs}}{1 + s\\frac{C_{gs}}{g_m}}$$\n\nThis equation reveals the frequency-dependent behavior:\n*   **At low frequencies (DC, $s \\to 0$):** $Z_{out} \\approx \\frac{1}{g_m}$. This is the standard, purely resistive output impedance of a source follower.\n*   **At high frequencies ($s \\to \\infty$):** $Z_{out} \\approx \\frac{sR_S C_{gs}}{sC_{gs}} = R_S$. The impedance becomes resistive again, equal to the source resistance.\n\n**When is it inductive?**\nAn impedance is inductive if its magnitude *increases* with frequency. For this to happen, the \"zero\" in the numerator must take effect at a lower frequency than the \"pole\" in the denominator.\n*   Zero frequency: $\\omega_z = \\frac{1}{R_S C_{gs}}$\n*   Pole frequency: $\\omega_p = \\frac{g_m}{C_{gs}}$\n\nFor inductive behavior, we need $\\omega_z < \\omega_p$:\n$$\\frac{1}{R_S C_{gs}} < \\frac{g_m}{C_{gs}}$$\n$$\\frac{1}{R_S} < g_m$$\n**$$R_S > \\frac{1}{g_m}$$**\n\n**Conclusion:**\nIf the driving source resistance $R_S$ is greater than the inverse of the transistor's transconductance ($1/g_m$), the output impedance will rise with frequency before eventually flattening out at $R_S$. This rising impedance characteristic is the hallmark of an **inductor**.\n\n*(Note: In practical circuit design, this inductive output impedance can be problematic because if the source follower drives a capacitive load, the equivalent inductance and the load capacitance can form an LC tank, leading to ringing or instability/oscillation).*",
        "format": "markdown",
        "sha256": "8cfba25c1a728c51a7f0393fb30d923570054cbed438c6fabd29d939caa512df"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the output impedance, showing the transition from about 1/gm at low frequencies to RS at high frequencies and inductive behavior when RS > 1/gm.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2164,
        "output_tokens": 11925,
        "total_tokens": 14089,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8873,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 6349,
        "total_tokens": 7431,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit.\n\n### 1. Circuit Topology and Basic Function\nThe circuit consists of two NMOS transistors ($M_1$ and $M_2$), a resistor ($R_{D1}$), and an input current source ($I_{in}$).\n*   **Forward Path:** Transistor $M_1$ acts as a **common-source amplifier**. The input signal (voltage at node $X$) is applied to its gate, and the output is taken from its drain ($V_{out}$). The resistor $R_{D1}$ serves as the load. This stage provides an inverting voltage gain.\n*   **Feedback Path:** Transistor $M_2$ provides a feedback path from the output back to the input. Its gate is connected to $V_{out}$, and its drain is connected to the input node $X$. It acts as a transconductance stage, converting the output voltage back into a current at the input node.\n*   **Overall Configuration:** This is a **shunt-shunt feedback** topology, typically used for **Transimpedance Amplifiers (TIAs)**, which convert an input current into an output voltage.\n\n### 2. DC Operating Point Analysis\nLet's determine how the circuit biases itself in a steady DC state (assuming it is stable):\n1.  **Node X (KCL):** The ideal current source $I_{in}$ pushes current into node $X$. Assuming the gate of $M_1$ draws no DC current, all of $I_{in}$ must flow through $M_2$ to ground.\n    $$I_{D2} = I_{in}$$\n2.  **Output Node ($V_{out}$):** Since $I_{D2}$ is fixed by the input, the gate-to-source voltage of $M_2$ ($V_{GS2}$) is determined. Because the source of $M_2$ is grounded, $V_{GS2} = V_{out}$.\n    $$V_{out} = V_{th2} + \\sqrt{\\frac{2 I_{in}}{\\mu_n C_{ox} (W/L)_2}}$$\n    *(This assumes $M_2$ is in saturation).*\n3.  **Transistor $M_1$ Bias:** The voltage $V_{out}$ also sets the drain current for $M_1$ via the load resistor $R_{D1}$:\n    $$I_{D1} = \\frac{V_{DD} - V_{out}}{R_{D1}}$$\n4.  **Node X Voltage ($V_X$):** Finally, the required $I_{D1}$ determines the necessary gate-to-source voltage for $M_1$ ($V_{GS1} = V_X$):\n    $$V_X = V_{th1} + \\sqrt{\\frac{2 I_{D1}}{\\mu_n C_{ox} (W/L)_1}}$$\n\nThis shows that a mathematical DC operating point exists.\n\n### 3. Small-Signal Analysis\nLet's analyze the AC small-signal behavior to find the transimpedance gain ($R_T = v_{out}/i_{in}$).\n*   Let $g_{m1}$ and $g_{m2}$ be the transconductances of $M_1$ and $M_2$.\n*   Let $r_{o1}$ and $r_{o2}$ be their output resistances.\n*   Let $R_{out1} = R_{D1} \\parallel r_{o1}$.\n\n**KCL at Node X:**\n$$i_{in} = i_{d2} + \\frac{v_x}{r_{o2}}$$\n$$i_{in} = g_{m2}v_{out} + \\frac{v_x}{r_{o2}}$$\n\n**KCL at Output Node:**\n$$v_{out} = -g_{m1}v_x R_{out1}$$\nFrom this, we can express $v_x$ in terms of $v_{out}$:\n$$v_x = -\\frac{v_{out}}{g_{m1}R_{out1}}$$\n\n**Solving for Gain ($R_T$):**\nSubstitute $v_x$ back into the Node X equation:\n$$i_{in} = g_{m2}v_{out} + \\frac{1}{r_{o2}} \\left( -\\frac{v_{out}}{g_{m1}R_{out1}} \\right)$$\n$$i_{in} = v_{out} \\left( g_{m2} - \\frac{1}{g_{m1}R_{out1}r_{o2}} \\right)$$\n$$R_T = \\frac{v_{out}}{i_{in}} = \\frac{1}{g_{m2} - \\frac{1}{g_{m1}R_{out1}r_{o2}}}$$\n\n*Ideal Case:* If we assume the output resistance of $M_2$ is very large ($r_{o2} \\to \\infty$), the gain simplifies beautifully to:\n$$R_T \\approx \\frac{1}{g_{m2}}$$\n\n### 4. Stability and Feedback Polarity (Critical Finding)\nWhile the math above yields a gain equation, we must check the polarity of the feedback loop to see if the circuit is actually stable.\n\nLet's trace a small positive perturbation at node X ($\\Delta v_x \\uparrow$):\n1.  $v_x \\uparrow \\implies$ $M_1$ drain current increases ($i_{d1} \\uparrow$).\n2.  Increased current through $R_{D1}$ causes $v_{out}$ to drop ($v_{out} \\downarrow$).\n3.  $v_{out}$ is the gate voltage of $M_2$. So, $v_{gs2} \\downarrow \\implies$ $M_2$ drain current decreases ($i_{d2} \\downarrow$).\n4.  Look at Node X: The current pulled *out* of the node by $M_2$ has decreased. If $I_{in}$ is constant, this means there is a net *excess* of current entering node X.\n5.  This excess current will charge the parasitic capacitance at node X, causing $v_x$ to **increase even further**.\n\n**Conclusion:** This circuit employs **Positive Feedback**.\nBecause the loop gain ($T = g_{m1}g_{m2}R_{out1}r_{o2}$) is typically much greater than 1, the circuit is **unstable**. It will not operate as a linear transimpedance amplifier. Instead, any small noise will cause it to latch to one of the supply rails (acting more like a memory cell or a Schmitt trigger component).\n\n### Summary\n*   **Intended Topology:** Transimpedance Amplifier (current-to-voltage converter).\n*   **Theoretical Gain:** $R_T \\approx 1/g_{m2}$ (assuming ideal conditions).\n*   **Practical Reality:** The specific arrangement of two NMOS transistors creates a **positive feedback loop**. The circuit is unstable and will latch rather than amplify linearly. *(Note: For this to be a stable negative-feedback TIA, $M_2$ would typically need to be a PMOS transistor configured differently, or an additional inverting stage would be required in the loop).*",
        "format": "markdown",
        "sha256": "f49c57b6c8ec8e017802658cdea80f95039ee98d5b1f813de30bf04ba2d202aa"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies that M2’s gate is tied to Vout, traces the positive-feedback loop, and concludes that the circuit is unstable and latches. These meet the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2236,
        "output_tokens": 29499,
        "total_tokens": 31735,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 15710,
        "total_tokens": 16828,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis covering its structure, DC operating point, small-signal behavior, and overall function.\n\n### 1. Circuit Structure & Topology\n*   **Components:** The circuit consists of two NMOS transistors ($M_1$ and $M_2$), a drain resistor ($R_{D1}$), and an ideal DC input current source ($I_{in}$).\n*   **Configuration:**\n    *   **$M_1$ Stage:** Acts as a Common-Source (CS) amplifier. Its input is at the gate (Node X), and its output is at the drain ($V_{out}$).\n    *   **$M_2$ Stage:** Also acts as a Common-Source amplifier, but it is placed in a feedback loop. Its input is the output of the first stage ($V_{out}$), and its output (drain current) feeds back into Node X.\n*   **Feedback Loop:** The circuit features a closed loop: Node X $\\rightarrow$ $M_1$ $\\rightarrow$ $V_{out}$ $\\rightarrow$ $M_2$ $\\rightarrow$ Node X.\n\n### 2. DC Analysis (Biasing)\nTo understand how the circuit settles at a steady state (assuming it is stable), we analyze the DC currents and voltages:\n1.  **Node X:** The ideal current source $I_{in}$ pushes current into Node X. Since the gate of $M_1$ draws no DC current, all of $I_{in}$ must flow through the drain of $M_2$ to ground.\n    $$I_{D2} = I_{in}$$\n2.  **$M_2$ Gate Voltage ($V_{out}$):** To support this drain current, $M_2$ requires a specific gate-to-source voltage. Since its source is grounded, $V_{GS2} = V_{out}$. Assuming $M_2$ is in saturation:\n    $$V_{out} = V_{TH2} + \\sqrt{\\frac{2 I_{in}}{\\mu_n C_{ox} (W/L)_2}}$$\n3.  **$M_1$ Drain Current ($I_{D1}$):** The voltage $V_{out}$ is also determined by the voltage drop across $R_{D1}$ caused by $M_1$'s drain current:\n    $$V_{out} = V_{DD} - I_{D1} R_{D1} \\implies I_{D1} = \\frac{V_{DD} - V_{out}}{R_{D1}}$$\n4.  **Node X Voltage ($V_X$):** Finally, to support $I_{D1}$, $M_1$ requires a specific gate voltage ($V_X$):\n    $$V_X = V_{TH1} + \\sqrt{\\frac{2 I_{D1}}{\\mu_n C_{ox} (W/L)_1}}$$\nThis establishes that a valid DC operating point exists.\n\n### 3. Small-Signal Analysis & Feedback Polarity\nTo determine how the circuit reacts to signals and whether it is stable, we perform a small-signal analysis. Let's trace a small perturbation to determine the feedback polarity:\n1.  Assume a small increase in voltage at Node X ($\\uparrow v_x$).\n2.  This increases the gate voltage of $M_1$, causing its drain current to increase.\n3.  Increased current through $R_{D1}$ causes the output voltage to drop ($\\downarrow v_{out}$). *(Inverting stage)*\n4.  The drop in $v_{out}$ lowers the gate voltage of $M_2$, causing its drain current to decrease ($\\downarrow i_{d2}$). *(Non-inverting transconductance)*\n5.  At Node X, the current leaving the node ($i_{d2}$) has decreased, while the input current $I_{in}$ remains constant. This net surplus of current at Node X will cause $v_x$ to **increase even further** ($\\uparrow\\uparrow v_x$).\n\n**Conclusion:** The circuit employs **Positive Feedback**.\n\n### 4. Quantitative Small-Signal Derivations\nLet's calculate the exact small-signal parameters. Let $R_{out1} = R_{D1} || r_{o1}$ (the total resistance at the drain of $M_1$).\n\n**A. Loop Gain ($T$)**\nIf we break the loop at the gate of $M_1$ and inject a test voltage $v_t$:\n*   $v_{out} = -g_{m1} R_{out1} v_t$\n*   The current generated by $M_2$ is $i_{d2} = g_{m2} v_{out} = -g_{m1} g_{m2} R_{out1} v_t$\n*   This current flows out of Node X. The voltage returned to Node X is $v_{return} = -i_{d2} r_{o2} = g_{m1} g_{m2} R_{out1} r_{o2} v_t$\n*   **Loop Gain $T$** = $\\frac{v_{return}}{v_t} = g_{m1} g_{m2} R_{out1} r_{o2}$\nSince all terms are positive, $T > 0$, confirming positive feedback.\n\n**B. Input Resistance ($R_{in}$ at Node X)**\nApply a test current $i_x$ at Node X:\n*   $v_{out} = -g_{m1} R_{out1} v_x$\n*   KCL at Node X: $i_x = i_{d2} + \\frac{v_x}{r_{o2}} = g_{m2} v_{out} + \\frac{v_x}{r_{o2}}$\n*   Substitute $v_{out}$: $i_x = -g_{m1} g_{m2} R_{out1} v_x + \\frac{v_x}{r_{o2}} = v_x \\left( \\frac{1}{r_{o2}} - g_{m1} g_{m2} R_{out1} \\right)$\n*   **$R_{in}$** = $\\frac{v_x}{i_x} = \\frac{r_{o2}}{1 - g_{m1} g_{m2} R_{out1} r_{o2}} = \\frac{r_{o2}}{1 - T}$\n\n**C. Transimpedance Gain ($R_T = v_{out} / i_{in}$)**\n*   $R_T = \\frac{v_{out}}{v_x} \\times \\frac{v_x}{i_{in}} = (-g_{m1} R_{out1}) \\times R_{in}$\n*   **$R_T$** = $\\frac{-g_{m1} R_{out1} r_{o2}}{1 - g_{m1} g_{m2} R_{out1} r_{o2}}$\n\n### 5. Summary and Applications\nBecause this circuit uses positive feedback, its behavior depends entirely on the magnitude of the loop gain $T = g_{m1} g_{m2} (R_{D1} || r_{o1}) r_{o2}$:\n\n*   **If $T < 1$:** The circuit is technically stable and acts as a transimpedance amplifier, but with artificially boosted (and highly sensitive) gain and input resistance. This is rarely used in practice due to instability over process/temperature variations.\n*   **If $T > 1$ (Typical Case):** The denominator $(1-T)$ becomes negative.\n    *   **Negative Resistance:** The input resistance $R_{in}$ becomes negative. This topology is frequently used as an active **negative resistance generator** to cancel out parasitic losses in LC tank circuits to build oscillators.\n    *   **Latch/Bistability:** If not used in an oscillator, the positive feedback will cause the circuit to be unstable at its DC operating point. Any noise will cause it to \"snap\" or latch to one of the supply rails (driving one transistor into cutoff and the other into the triode region).",
        "format": "markdown",
        "sha256": "ba0f03daff062d561b8a7c870f3d4d5f03e3dca70f2641005ce40dbd5d93072b"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2 as controlled by Vout, traces the positive-feedback loop, and derives the loop-modified input resistance. It also recognizes negative resistance and the resulting instability or latching when loop gain exceeds one.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2236,
        "output_tokens": 23425,
        "total_tokens": 25661,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 11246,
        "total_tokens": 12364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9452,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its structure, operation, and small-signal characteristics.\n\n### 1. Circuit Topology and Basic Operation\n*   **Components:** The circuit consists of two NMOS transistors ($M_1$, $M_2$), a drain resistor ($R_{D1}$), and an input DC current source ($I_{in}$).\n*   **Configuration:**\n    *   **$M_1$ Stage:** Acts as a **common-source amplifier**. The input is at its gate (node $X$), and the output is at its drain ($V_{out}$).\n    *   **$M_2$ Stage:** Acts as a **feedback network**. It senses the output voltage $V_{out}$ at its gate and returns a current to the input node $X$ via its drain.\n*   **Feedback Type:** Because it senses voltage at the output (shunt connection) and mixes current at the input (shunt connection), this is a **shunt-shunt feedback** topology. This type of circuit is typically intended to be a **transimpedance amplifier** (TIA), which converts an input current into an output voltage.\n\n### 2. DC Operating Point Analysis\nLet's assume both transistors are biased in the saturation region.\n1.  The input current $I_{in}$ flows into node $X$. Assuming the gate of $M_1$ draws no DC current, all of $I_{in}$ must flow through $M_2$ to ground.\n    $$I_{D2} = I_{in}$$\n2.  The drain current of $M_2$ is determined by its gate-source voltage, which is $V_{out}$.\n    $$I_{in} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{out} - V_{TH2})^2$$\n    This equation shows that the DC output voltage $V_{out}$ is set by the input current $I_{in}$ and the dimensions of $M_2$.\n3.  The output voltage $V_{out}$ is also determined by the voltage drop across $R_{D1}$ due to $M_1$'s drain current.\n    $$V_{out} = V_{DD} - I_{D1} R_{D1}$$\n4.  This sets the required drain current for $M_1$ ($I_{D1}$), which in turn dictates the required DC voltage at node $X$ ($V_X$) to keep $M_1$ in saturation.\n\n### 3. Small-Signal Analysis\nTo understand the dynamic behavior, we perform a small-signal analysis. For simplicity and clarity, we will initially ignore the channel-length modulation effect (assume output resistances $r_{o1}, r_{o2} \\rightarrow \\infty$).\n\nLet $i_{in}$ be a small-signal input current, $v_x$ be the small-signal voltage at node $X$, and $v_{out}$ be the small-signal output voltage.\n\n*   **$M_1$ Amplifier Equation:**\n    The small-signal output voltage is generated by $M_1$ driving $R_{D1}$:\n    $$v_{out} = -g_{m1} R_{D1} v_x \\quad \\text{--- (Equation 1)}$$\n\n*   **Node $X$ KCL (Feedback Equation):**\n    The current entering node $X$ must equal the current leaving it through $M_2$:\n    $$i_{in} = i_{d2}$$\n    Since $i_{d2} = g_{m2} v_{gs2}$ and $v_{gs2} = v_{out}$:\n    $$i_{in} = g_{m2} v_{out} \\quad \\text{--- (Equation 2)}$$\n\n#### A. Transimpedance Gain ($R_T$)\nFrom Equation 2, we can directly find the transimpedance gain:\n$$R_T = \\frac{v_{out}}{i_{in}} = \\frac{1}{g_{m2}}$$\nInterestingly, in this simplified ideal case, the transimpedance gain depends entirely on the feedback transistor $M_2$ and is independent of the forward amplifier ($M_1$).\n\n#### B. Input Resistance ($R_{in}$)\nTo find the input resistance looking into node $X$, we substitute Equation 1 into Equation 2:\n$$i_{in} = g_{m2} (-g_{m1} R_{D1} v_x)$$\n$$i_{in} = -g_{m1} g_{m2} R_{D1} v_x$$\n$$R_{in} = \\frac{v_x}{i_{in}} = -\\frac{1}{g_{m1} g_{m2} R_{D1}}$$\n\n### 4. Key Finding: Positive Feedback and Instability\nThe most critical result of the small-signal analysis is that the **input resistance is negative**.\n\nLet's trace the signal loop to understand why physically:\n1.  Assume a small positive current perturbation $\\Delta i_{in}$ enters node $X$. This tends to increase the voltage $v_x$.\n2.  An increase in $v_x$ causes $M_1$ to pull more current, dropping the output voltage $v_{out}$ (inverting action).\n3.  A decrease in $v_{out}$ lowers the gate voltage of $M_2$, causing $M_2$ to draw *less* current from node $X$.\n4.  Because $M_2$ is drawing less current while the input source is pushing more current in, the net current charging node $X$ increases further, pushing $v_x$ even higher.\n\nThis is the definition of **positive feedback**. Instead of stabilizing the input node (as a standard negative-feedback transimpedance amplifier would), this circuit destabilizes it.\n\n### Conclusion\nWhile drawn like a standard feedback amplifier, this specific topology implements **positive feedback**.\n*   It exhibits a **negative input resistance** ($R_{in} \\approx -1 / (g_{m1}g_{m2}R_{D1})$).\n*   Due to the positive feedback, this circuit is generally **unstable** and would likely act as an oscillator or latch up to a supply rail in a real-world scenario, depending on parasitic capacitances.\n*   In specific advanced analog design contexts, such sub-circuits are sometimes used intentionally as \"Negative Impedance Converters\" (NICs) to cancel out unwanted positive parasitic resistances and boost bandwidth, though they require careful stabilization.",
        "format": "markdown",
        "sha256": "998e4a3e861af219c6addfd0fbb1a992dabb61aad326aea9b4ed02ec81ba1239"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection to Vout, traces the positive-feedback loop, and recognizes negative input resistance and instability/latching. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2236,
        "output_tokens": 25968,
        "total_tokens": 28204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22365,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 13789,
        "total_tokens": 14907,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12351,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit.\n\n### 1. Circuit Topology & Function\nThe circuit is a **Transimpedance Amplifier (TIA)**, which is designed to take an input current ($I_{in}$) and convert it into an output voltage ($V_{out}$). It consists of two amplifier stages and a feedback network:\n*   **First Stage ($M_1$):** A **Common-Gate (CG)** amplifier. The input signal is applied to the source, the gate is held at a constant DC bias voltage ($V_b$), and the output is taken at the drain (node $X$).\n*   **Second Stage ($M_2$):** A **Common-Source (CS)** amplifier. The signal from node $X$ is applied to the gate, the source is grounded, and the output is taken at the drain ($V_{out}$).\n*   **Feedback Network ($R_F$):** A resistor connecting the output voltage node back to the input current node. This forms a **shunt-shunt** (or voltage-current) negative feedback loop.\n\n### 2. Qualitative Analysis (Signal Flow & Feedback)\nLet's trace a small-signal increase in the input current to understand the circuit's operation and verify the feedback polarity:\n1.  If $I_{in}$ increases, it pushes more current into the input node, causing the voltage at the source of $M_1$ ($v_{in}$) to **increase**.\n2.  An increase in the source voltage of $M_1$ (with a fixed gate voltage) decreases its gate-to-source voltage ($V_{gs1}$), which **decreases** the drain current flowing through $M_1$.\n3.  With less current flowing through $R_{D1}$, the voltage drop across it decreases, causing the voltage at node $X$ ($v_x$) to **increase**.\n4.  An increase in $v_x$ (the gate voltage of $M_2$) increases its $V_{gs2}$, which **increases** the drain current of $M_2$.\n5.  More current flowing through $R_{D2}$ increases the voltage drop across it, causing the output voltage ($V_{out}$) to **decrease**.\n6.  A decrease in $V_{out}$ means the voltage difference across $R_F$ changes, drawing more current *away* from the input node through $R_F$ (since $i_{RF} = \\frac{v_{in} - v_{out}}{R_F}$).\n7.  This extra current drawn away opposes the initial increase in $v_{in}$, confirming that this is **Negative Feedback**.\n\n### 3. Small-Signal Mathematical Analysis\nLet's derive the closed-loop gain (transimpedance, $Z_T = \\frac{v_{out}}{i_{in}}$) using feedback theory. We will assume the transistors have transconductances $g_{m1}$ and $g_{m2}$, and we will ignore channel-length modulation ($r_o \\to \\infty$) for simplicity.\n\n**A. Loop Gain ($T$)**\nTo find the loop gain, we break the loop at the gate of $M_2$, inject a test voltage $v_t$, and measure the return voltage $v_r$ at node $X$.\n*   The output voltage is: $v_{out} = -g_{m2} (R_{D2} \\parallel R_F) v_t$\n*   This voltage causes a feedback current to flow to the input node: $i_f = \\frac{v_{out}}{R_F}$ (assuming the input node impedance is relatively small).\n*   The input node has an impedance looking into $M_1$ of approximately $\\frac{1}{g_{m1}}$. The voltage developed at the input node is: $v_{in} = i_f \\left( \\frac{1}{g_{m1}} \\parallel R_F \\right) = \\frac{v_{out}}{R_F} \\left( \\frac{R_F / g_{m1}}{R_F + 1/g_{m1}} \\right) = v_{out} \\left( \\frac{1}{1 + g_{m1}R_F} \\right)$\n*   The CG stage amplifies this to node $X$: $v_r = g_{m1} R_{D1} v_{in}$\n*   Substituting $v_{in}$ and $v_{out}$:\n    $$v_r = g_{m1} R_{D1} \\left[ -g_{m2} (R_{D2} \\parallel R_F) v_t \\right] \\left( \\frac{1}{1 + g_{m1}R_F} \\right)$$\n*   The loop gain $T = -\\frac{v_r}{v_t}$ is:\n    $$T = \\frac{g_{m1} g_{m2} R_{D1} (R_{D2} \\parallel R_F)}{1 + g_{m1}R_F}$$\n\n**B. Closed-Loop Transimpedance ($Z_T$)**\nUsing the standard feedback equation $A_{closed} = \\frac{A_{forward}}{1 + T}$:\n*   The forward gain $A_{forward}$ (with $R_F$ loading the input and output) is the gain from $i_{in}$ to $v_{out}$ without the feedback signal returning.\n    $$A_{forward} = - \\frac{g_{m1} g_{m2} R_{D1} R_F (R_{D2} \\parallel R_F)}{1 + g_{m1}R_F}$$\n    *(Note: $A_{forward}$ is exactly equal to $-T \\cdot R_F$)*\n*   Therefore, the closed-loop transimpedance is:\n    $$Z_T = \\frac{v_{out}}{i_{in}} = \\frac{-T \\cdot R_F}{1 + T}$$\n\n**C. Ideal Case**\nIf the open-loop gain of the amplifiers is very large, the loop gain $T \\gg 1$. The equation simplifies significantly:\n$$Z_T \\approx \\frac{-T \\cdot R_F}{T} = -R_F$$\nIn a well-designed circuit, the transimpedance gain is determined almost entirely by the feedback resistor $R_F$.\n\n### 4. Key Characteristics\n*   **Input Impedance ($R_{in}$):** The open-loop input impedance is roughly $1/g_{m1}$. The shunt feedback at the input reduces this by a factor of $(1+T)$.\n    $$R_{in, closed} \\approx \\frac{1/g_{m1}}{1 + T}$$\n    This extremely low input impedance makes it an excellent current sensor (ideal current inputs should have 0 impedance).\n*   **Output Impedance ($R_{out}$):** The open-loop output impedance is roughly $R_{D2}$. The shunt feedback at the output also reduces this by a factor of $(1+T)$.\n    $$R_{out, closed} \\approx \\frac{R_{D2}}{1 + T}$$\n    This low output impedance makes it an excellent voltage source to drive subsequent stages.",
        "format": "markdown",
        "sha256": "2e660d64a55f3c0a1dbd4beafdc6dd32f5e2afce729285215d67262c6c97603d"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from Vout to the input node, forming a transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2186,
        "output_tokens": 23679,
        "total_tokens": 25865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20407,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 10360,
        "total_tokens": 11453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8765,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification and Topology\nThe circuit is a **Transimpedance Amplifier (TIA)**, which is designed to convert an input current ($I_{in}$) into an output voltage ($V_{out}$).\n*   **First Stage ($M_1$):** This transistor is in a **Common-Gate (CG)** configuration. Its gate is connected to a constant DC bias voltage ($V_b$), the input signal is applied to its source, and the output is taken from its drain (Node $X$).\n*   **Second Stage ($M_2$):** This transistor is in a **Common-Source (CS)** configuration. The signal from Node $X$ drives its gate, its source is grounded, and the final output is taken from its drain.\n*   **Feedback Network ($R_F$):** The resistor $R_F$ connects the output voltage node back to the input current node. This forms a **shunt-shunt negative feedback** loop (voltage sampled at the output, current mixed at the input).\n\n### 2. Qualitative Analysis (How it works)\nLet's trace a signal through the circuit to understand its operation and confirm the negative feedback:\n1.  Suppose the input current **$I_{in}$ increases**.\n2.  This pushes more current into the input node, causing the voltage at the source of $M_1$ to **rise**.\n3.  Because the gate of $M_1$ is fixed at $V_b$, an increase in source voltage means the gate-to-source voltage ($V_{GS1}$) **decreases**.\n4.  A smaller $V_{GS1}$ causes the drain current of $M_1$ to **decrease**.\n5.  With less current flowing through the load resistor $R_{D1}$, the voltage drop across it decreases, causing the voltage at Node $X$ to **rise**.\n6.  Node $X$ is connected to the gate of $M_2$. An increase in voltage here increases $V_{GS2}$, causing the drain current of $M_2$ to **increase**.\n7.  More current flowing through $R_{D2}$ increases the voltage drop across it, causing the output voltage **$V_{out}$ to fall**.\n8.  The drop in $V_{out}$ causes a current ($i_{RF}$) to flow through $R_F$ from the input node towards the output node. This draws current *away* from the input, opposing the initial increase in $I_{in}$. This confirms the presence of **negative feedback**.\n\n### 3. Quantitative Small-Signal Analysis\nTo analyze the performance, we can use feedback theory. Assume the transistors are in saturation and ignore channel-length modulation ($r_o \\to \\infty$) for a simplified first-order analysis.\n\n**A. Open-Loop Parameters (without $R_F$ feedback effect):**\n*   **Input Resistance ($R_{in,ol}$):** Looking into the source of the common-gate stage $M_1$, the resistance is approximately:\n    $$R_{in,ol} \\approx \\frac{1}{g_{m1}}$$\n*   **Forward Transimpedance Gain ($R_{T,ol}$):**\n    *   The input voltage is $v_{in} \\approx i_{in} \\cdot \\frac{1}{g_{m1}}$.\n    *   The voltage gain of the CG stage is $A_{v1} = \\frac{v_x}{v_{in}} = g_{m1}R_{D1}$.\n    *   The voltage gain of the CS stage is $A_{v2} = \\frac{v_{out}}{v_x} = -g_{m2}R_{D2}$.\n    *   Total open-loop transimpedance: $R_{T,ol} = \\frac{v_{out}}{i_{in}} = \\frac{v_{in}}{i_{in}} \\cdot A_{v1} \\cdot A_{v2} = \\left(\\frac{1}{g_{m1}}\\right)(g_{m1}R_{D1})(-g_{m2}R_{D2}) = -g_{m2}R_{D1}R_{D2}$\n\n**B. Feedback Factor ($\\beta$):**\nThe feedback network $R_F$ samples the output voltage and returns a current to the input.\n$$\\beta = \\frac{i_{feedback}}{v_{out}} = -\\frac{1}{R_F}$$\n\n**C. Closed-Loop Transimpedance Gain ($Z_T$):**\nUsing the standard feedback equation $A_{closed} = \\frac{A_{open}}{1 + A_{open}\\beta}$:\n$$Z_T = \\frac{-g_{m2}R_{D1}R_{D2}}{1 + (-g_{m2}R_{D1}R_{D2})(-\\frac{1}{R_F})} = \\frac{-g_{m2}R_{D1}R_{D2}}{1 + \\frac{g_{m2}R_{D1}R_{D2}}{R_F}}$$\nIf the loop gain is large (i.e., $\\frac{g_{m2}R_{D1}R_{D2}}{R_F} \\gg 1$), the gain simplifies to the ideal feedback case:\n$$Z_T \\approx -R_F$$\n*This means nearly all the input current flows through the feedback resistor.*\n\n**D. Input and Output Impedances:**\nShunt-shunt feedback lowers both input and output impedances by a factor of $(1 + \\text{Loop Gain})$.\n*   **Closed-Loop Input Impedance ($R_{in}$):**\n    $$R_{in} = \\frac{R_{in,ol}}{1 + \\text{Loop Gain}} \\approx \\frac{1/g_{m1}}{\\frac{g_{m2}R_{D1}R_{D2}}{R_F}} = \\frac{R_F}{g_{m1}g_{m2}R_{D1}R_{D2}}$$\n    *Result: The input impedance is extremely low, which is ideal for a circuit receiving a current signal.*\n*   **Closed-Loop Output Impedance ($R_{out}$):**\n    $$R_{out} = \\frac{R_{out,ol}}{1 + \\text{Loop Gain}} \\approx \\frac{R_{D2}}{\\frac{g_{m2}R_{D1}R_{D2}}{R_F}} = \\frac{R_F}{g_{m2}R_{D1}}$$\n    *Result: The output impedance is significantly reduced, making it better at driving subsequent stages.*\n\n### Summary of Advantages\nThis specific topology (CG stage followed by a CS stage with shunt-shunt feedback) is highly favored in high-speed optical receivers (like reading signals from a photodiode).\n1.  **Excellent Current Sensing:** The Common-Gate input stage provides an inherently low input impedance ($\\approx 1/g_{m1}$) even before feedback is applied. The feedback lowers it further, ensuring all input current goes into the amplifier rather than being lost to parasitic input capacitance.\n2.  **High Bandwidth:** Because the input impedance is so low, the $RC$ time constant at the input node (which usually dictates the bandwidth limit in TIAs due to large photodiode capacitance) is minimized, allowing for high-frequency operation.",
        "format": "markdown",
        "sha256": "46821e95803a0d55bf7fe67d10f60e671752ae37fe7f9f9aaa39f56713ea060d"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input, forming a transimpedance amplifier. It also gives the correct high-loop-gain transimpedance and low-input-resistance conclusions.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2186,
        "output_tokens": 24858,
        "total_tokens": 27044,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21331,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 10580,
        "total_tokens": 11673,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its structure, operation, and performance characteristics.\n\n### 1. Circuit Identification and Topology\nThe circuit is a **Transimpedance Amplifier (TIA)**. Its primary function is to convert an input current ($I_{in}$) into an output voltage ($V_{out}$).\n*   **Core Amplifier:** The forward path consists of two stages:\n    *   **Stage 1 ($M_1$):** A **Common-Gate (CG)** amplifier. The gate is connected to a DC bias voltage ($V_b$), making it an AC ground. The input signal is applied to the source, and the output is taken at the drain (Node $X$). This stage provides a low input impedance and a positive voltage gain.\n    *   **Stage 2 ($M_2$):** A **Common-Source (CS)** amplifier. The signal from Node $X$ is applied to the gate, and the output is taken at the drain. This stage provides a negative voltage gain.\n*   **Feedback Network:** The resistor $R_F$ connects the output voltage node back to the input current node. This forms a **shunt-shunt feedback** (or voltage-shunt feedback) topology. It samples the output voltage and feeds back a current to the input.\n\n### 2. Qualitative Operation (How it works)\nLet's trace a small-signal increase in the input current, $i_{in}$:\n1.  An increase in $i_{in}$ pushes more current into the input node, causing the voltage at the source of $M_1$ to **rise**.\n2.  Because the gate of $M_1$ is fixed at $V_b$, a rise in source voltage decreases the gate-to-source voltage ($v_{gs1}$), which **decreases** the drain current of $M_1$.\n3.  With less current flowing through $R_{D1}$, the voltage drop across it decreases, causing the voltage at Node $X$ to **rise**.\n4.  A higher voltage at Node $X$ (the gate of $M_2$) increases the $v_{gs2}$ of $M_2$, which **increases** its drain current.\n5.  More current flowing through $R_{D2}$ increases the voltage drop across it, causing the output voltage $V_{out}$ to **fall**.\n6.  **Feedback Action:** The decrease in $V_{out}$ causes a change in the current $i_{RF}$ flowing through $R_F$. Specifically, it draws more current away from the input node through $R_F$, which opposes the initial rise in input voltage. This confirms it is **negative feedback**.\n\n### 3. Quantitative Small-Signal Analysis\nTo analyze the circuit mathematically, we use a small-signal model. We will assume the transistors are in saturation and, for simplicity, ignore channel-length modulation ($r_o \\to \\infty$).\n\nLet $v_{in}$, $v_x$, and $v_{out}$ be the small-signal AC voltages at the input node, Node $X$, and the output node, respectively. Let $i_{in}$ be the small-signal input current.\n\n**Ideal Case (Infinite Loop Gain):**\nIf the forward gain of the $M_1$-$M_2$ amplifier is extremely high, the negative feedback will force the input node to act as a **virtual ground** (AC voltage $v_{in} \\approx 0$).\n*   If $v_{in} = 0$, all the input current $i_{in}$ must flow through the feedback resistor $R_F$ because no AC current will enter the source of $M_1$.\n*   The current through $R_F$ (from input to output) is $i_{in}$.\n*   Therefore, the voltage drop across $R_F$ is $i_{in} \\cdot R_F$.\n*   $v_{in} - v_{out} = i_{in} \\cdot R_F \\implies 0 - v_{out} = i_{in} \\cdot R_F$\n*   **Ideal Transimpedance Gain:**  $\\frac{v_{out}}{i_{in}} \\approx -R_F$\n\n**Exact Small-Signal Derivation:**\nApplying Kirchhoff's Current Law (KCL) at the three main nodes:\n\n1.  **At the input node ($v_{in}$):**\n    $$i_{in} = g_{m1}v_{in} + \\frac{v_{in} - v_{out}}{R_F}$$\n    *(Note: The current entering the source of $M_1$ is $-g_{m1}v_{gs1} = -g_{m1}(-v_{in}) = g_{m1}v_{in}$)*\n\n2.  **At Node X ($v_x$):**\n    $$-g_{m1}v_{in} + \\frac{v_x}{R_{D1}} = 0 \\implies v_x = g_{m1}R_{D1}v_{in}$$\n\n3.  **At the output node ($v_{out}$):**\n    $$g_{m2}v_x + \\frac{v_{out}}{R_{D2}} + \\frac{v_{out} - v_{in}}{R_F} = 0$$\n\nSubstituting $v_x$ from equation (2) into equation (3):\n$$g_{m2}(g_{m1}R_{D1}v_{in}) + \\frac{v_{out}}{R_{D2}} + \\frac{v_{out} - v_{in}}{R_F} = 0$$\nSolving this system for the ratio $v_{out}/i_{in}$ yields the exact closed-loop transimpedance gain ($R_T$):\n\n$$R_T = \\frac{v_{out}}{i_{in}} = \\frac{R_{D2}(1 - g_{m1}g_{m2}R_{D1}R_F)}{1 + g_{m1}(R_F + R_{D2}) + g_{m1}g_{m2}R_{D1}R_{D2}}$$\n\n*Sanity Check:* If the transistor transconductances ($g_{m1}, g_{m2}$) are very large, the $g_{m1}g_{m2}$ terms dominate the numerator and denominator.\n$$R_T \\approx \\frac{-g_{m1}g_{m2}R_{D1}R_{D2}R_F}{g_{m1}g_{m2}R_{D1}R_{D2}} = -R_F$$\nThis matches our ideal virtual ground approximation.\n\n### 4. Impedance Characteristics\nThe shunt-shunt feedback topology significantly alters the input and output impedances of the core amplifier, making it highly suitable for its role.\n\n*   **Input Impedance ($R_{in}$):**\n    A good current receiver should have a very low input impedance so that all the input current flows into the circuit rather than being lost to parallel parasitic capacitances.\n    *   Without feedback, the input impedance is roughly $1/g_{m1}$ (looking into the source of $M_1$).\n    *   The shunt feedback at the input divides this impedance by the loop gain factor ($1 + T$).\n    *   **Result:** The closed-loop input impedance is extremely low, $R_{in} \\approx \\frac{1}{g_{m1} \\cdot T}$, making it an excellent current sink.\n\n*   **Output Impedance ($R_{out}$):**\n    A good voltage source should have a very low output impedance to drive subsequent stages without signal loss.\n    *   Without feedback, the output impedance is roughly $R_{D2}$.\n    *   The shunt feedback at the output also divides this impedance by the loop gain factor ($1 + T$).\n    *   **Result:** The closed-loop output impedance is very low, $R_{out} \\approx \\frac{R_{D2}}{T}$, making it an excellent voltage driver.\n\n### Summary\nThis circuit is a classic, high-performance **Transimpedance Amplifier**. By combining a Common-Gate input stage (for inherently low input impedance) with a Common-Source gain stage and wrapping it in shunt-shunt negative feedback, it achieves:\n1.  A stable, predictable gain set primarily by the passive component $R_F$ ($Gain \\approx -R_F$).\n2.  Extremely low input impedance, ideal for reading current sources (like photodiodes).\n3.  Low output impedance, ideal for driving subsequent voltage-sensing circuits.",
        "format": "markdown",
        "sha256": "358c31b690dd3bb3217e7459faf0b85a1a82309d41aae35373d3e1e85c38560a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate M1 input, common-source M2 driven by X, and RF feedback from Vout to the input, forming a negative-feedback transimpedance amplifier. The −RF high-loop-gain result is also correct.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2186,
        "output_tokens": 22381,
        "total_tokens": 24567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 11801,
        "total_tokens": 12894,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9915,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its structure, function, and small-signal behavior.\n\n### 1. Circuit Overview and Topology\nThe circuit consists of two NMOS transistors ($M_1$ and $M_2$) and several current sources.\n*   **$M_1$** is configured as a **common-gate** amplifier. Its gate is biased at a constant DC voltage $V_b$, its source is connected to the input node, and its drain is connected to the output node $V_{out}$.\n*   **$M_2$** is configured as a **common-drain** (source follower) amplifier. Its gate is connected to $V_{out}$, and its source is fed back to the input node.\n*   **$I_{in}$** represents the input signal (a current source).\n*   **$I_1$** is a DC bias current source that feeds the drain of $M_1$.\n*   The unlabeled current source at the bottom provides a DC bias tail current for the common source node.\n\nThe overall topology is a **Transimpedance Amplifier (TIA)** with a feedback loop. It is designed to convert an input current ($I_{in}$) into an output voltage ($V_{out}$).\n\n### 2. Ideal DC and Small-Signal Analysis\nTo understand the intended basic function of the circuit, we first analyze it assuming ideal components (specifically, that $I_1$ is an ideal current source with infinite output impedance).\n\n1.  **Virtual Ground at Input:**\n    Because $I_1$ is an ideal constant current source, it forces the drain current of $M_1$ ($I_{D1}$) to be constant ($I_{D1} = I_1$).\n    For $I_{D1}$ to be constant, the gate-source voltage of $M_1$ ($V_{gs1}$) must be constant. Since the gate is fixed at $V_b$, the source voltage (the input node) must also be perfectly constant.\n    In small-signal terms, this means the AC voltage at the input node is zero ($v_s = 0$). The input node acts as a **virtual ground**.\n\n2.  **Transimpedance Gain:**\n    Let's apply Kirchhoff's Current Law (KCL) at the input node (source of $M_1$ and $M_2$) for small AC signals.\n    The currents entering the node are the input current $i_{in}$, the AC current from $M_2$ ($i_{d2}$), and the AC current from $M_1$ ($i_{d1}$).\n    $$i_{in} + i_{d2} + i_{d1} = 0$$\n    Since we established that $I_{D1}$ is forced to be constant by $I_1$, its AC component is zero ($i_{d1} = 0$). The equation simplifies to:\n    $$i_{in} + i_{d2} = 0 \\implies i_{d2} = -i_{in}$$\n    The AC current $i_{d2}$ is determined by the source follower $M_2$:\n    $$i_{d2} = g_{m2} v_{gs2} = g_{m2} (v_{out} - v_s)$$\n    Since $v_s = 0$, we have $i_{d2} = g_{m2} v_{out}$. Substituting this back:\n    $$g_{m2} v_{out} = -i_{in}$$\n    $$R_T = \\frac{v_{out}}{i_{in}} = -\\frac{1}{g_{m2}}$$\n    **Conclusion:** Ideally, the circuit acts as a transimpedance amplifier with a gain of $-1/g_{m2}$.\n\n### 3. Non-Ideal Analysis and Stability (Advanced)\nWhile the ideal analysis yields a neat result, a deeper look reveals a critical issue with this specific topology regarding stability. Let's include the finite output resistance at the $V_{out}$ node, let's call it $R_{out}$ (which is approximately the $r_{o}$ of $M_1$ in parallel with the output resistance of $I_1$).\n\n1.  **Feedback Loop Polarity:**\n    Let's trace a perturbation around the loop:\n    *   Assume the input current $I_{in}$ increases, pushing the input node voltage $V_s$ slightly **up**.\n    *   The $V_{gs}$ of $M_1$ ($V_b - V_s$) goes **down**, causing $M_1$'s drain current $I_{D1}$ to **decrease**.\n    *   At the $V_{out}$ node, the constant current $I_1$ is entering, and $I_{D1}$ is leaving. If $I_{D1}$ decreases, there is a net positive current charging the node, causing $V_{out}$ to go **up** significantly (due to the high gain of the common-gate stage).\n    *   This higher $V_{out}$ is applied to the gate of $M_2$, causing $M_2$ to turn on harder.\n    *   $M_2$ sources more current into the input node $V_s$, pushing $V_s$ even further **up**.\n    This is a **positive feedback** loop.\n\n2.  **Input Impedance:**\n    We can quantify this instability by calculating the small-signal input resistance ($R_{in}$) at the common source node.\n    *   $v_{out} \\approx g_{m1} R_{out} v_s$ (Gain of the common-gate stage $M_1$)\n    *   KCL at input node: $i_{in} + g_{m2}(v_{out} - v_s) - g_{m1}v_s = 0$\n    Substituting $v_{out}$:\n    $$i_{in} + g_{m2}(g_{m1} R_{out} v_s - v_s) - g_{m1}v_s = 0$$\n    $$i_{in} + v_s (g_{m1} g_{m2} R_{out} - g_{m2} - g_{m1}) = 0$$\n    $$R_{in} = \\frac{v_s}{i_{in}} = \\frac{-1}{g_{m1} g_{m2} R_{out} - g_{m1} - g_{m2}}$$\n    Because $R_{out}$ is typically large, the term $g_{m1} g_{m2} R_{out}$ dominates, resulting in a **negative input resistance**:\n    $$R_{in} \\approx -\\frac{1}{g_{m1} g_{m2} R_{out}}$$\n\n### Summary\n*   **Intended Function:** The circuit is drawn as a **Transimpedance Amplifier (TIA)**.\n*   **Ideal Gain:** Under ideal assumptions, it provides a transimpedance gain of **$V_{out}/I_{in} = -1/g_{m2}$** and creates a virtual ground at the input.\n*   **Practical Reality:** The specific arrangement of $M_1$ and $M_2$ creates a strong **positive feedback** loop, resulting in a negative input impedance. In practice, unless driven by a source with an extremely low impedance (which defeats the purpose of a TIA), this circuit as drawn will be **unstable** and will likely latch or oscillate.",
        "format": "markdown",
        "sha256": "601fb794cdfc85612199636cc59ad17f505222779a234af08b915c381082b7fd"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It misreads M2 as an NMOS source follower rather than the PMOS feedback device, leading to incorrect positive-feedback, negative-input-resistance, and instability claims. It does identify a feedback path through M2 and gives the transimpedance magnitude 1/gm2, so the device-misread partial-credit rule applies.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 46931,
        "total_tokens": 49107,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 44023,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 33590,
        "total_tokens": 34678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification and Topology\nThe circuit is a **Transimpedance Amplifier (TIA)** with a negative feedback loop. Its primary function is to take an input current ($I_{in}$) and convert it into an output voltage ($V_{out}$).\n\n*   **$M_1$ (NMOS):** Acts as a **common-gate amplifier**. Its gate is biased at a constant DC voltage ($V_b$), its source is the input node, and its drain is the output node.\n*   **$M_2$ (PMOS):** Acts as a **feedback transconductor** (a common-source stage in the feedback path). It senses the output voltage $V_{out}$ at its gate and injects a feedback current into the input node at its drain.\n*   **$I_1$:** An ideal DC current source acting as an active load for $M_1$, providing a very high impedance to maximize voltage gain.\n*   **Bottom Current Source:** Provides the necessary DC bias current for the transistors.\n\n### 2. Qualitative Analysis (How it works)\nThe circuit employs **shunt-shunt negative feedback** to stabilize the input node and provide a well-defined transimpedance gain.\n\n1.  **Perturbation:** Suppose the input current $I_{in}$ increases.\n2.  **Input Node ($V_x$):** The extra current initially charges the parasitic capacitance at the common node (let's call it $V_x$), causing the voltage $V_x$ to rise.\n3.  **Forward Path ($M_1$):** As $V_x$ rises, the gate-to-source voltage of $M_1$ ($V_{gs1} = V_b - V_x$) decreases. This causes $M_1$ to conduct less current.\n4.  **Output Node ($V_{out}$):** Because the current source $I_1$ is forcing a constant current into the output node, if $M_1$ tries to draw less current, the voltage $V_{out}$ must **increase** significantly to maintain current balance (due to the high output resistance of $M_1$ and $I_1$).\n5.  **Feedback Path ($M_2$):** The increase in $V_{out}$ is sensed by the gate of the PMOS transistor $M_2$. A higher gate voltage reduces its source-to-gate voltage ($V_{sg2} = V_{DD} - V_{out}$), causing $M_2$ to conduct less current.\n6.  **Correction:** $M_2$ was injecting current into node $V_x$. Because it now conducts less, the net current entering $V_x$ decreases, counteracting the initial increase from $I_{in}$. This negative feedback tightly regulates the voltage at $V_x$.\n\n### 3. Quantitative Small-Signal Analysis\nLet's derive the key performance metrics: Transimpedance Gain ($R_T$), Input Impedance ($R_{in}$), and Output Impedance ($R_{out}$).\n*Assume ideal current sources (infinite AC resistance) and ignore body effect for simplicity.*\n\nLet $v_x$ be the small-signal voltage at the common source/drain node.\n\n**A. Transimpedance Gain ($R_T = v_{out} / i_{in}$)**\n*   **KCL at the output node ($V_{out}$):**\n    The current from $I_1$ is zero (AC open). The current entering $M_1$'s drain must be zero.\n    $$i_{d1} = g_{m1}v_{gs1} + \\frac{v_{ds1}}{r_{o1}} = 0$$\n    $$g_{m1}(-v_x) + \\frac{v_{out} - v_x}{r_{o1}} = 0$$\n    Solving for $v_{out}$:\n    $$v_{out} = (1 + g_{m1}r_{o1})v_x \\approx g_{m1}r_{o1}v_x$$\n    *(This shows $M_1$ provides a large voltage gain from $v_x$ to $v_{out}$)*\n\n*   **KCL at the input node ($V_x$):**\n    Sum of currents entering the node equals zero.\n    $$i_{in} + i_{d2} - i_{s1} = 0$$\n    Since $i_{d1} = 0$ (from above), the small-signal current entering $M_1$'s source ($i_{s1}$) is also $0$.\n    The current from $M_2$ is $i_{d2} = g_{m2}v_{sg2} = g_{m2}(0 - v_{out}) = -g_{m2}v_{out}$.\n    $$i_{in} - g_{m2}v_{out} - 0 = 0$$\n    $$i_{in} = g_{m2}v_{out}$$\n    Therefore, the transimpedance gain is:\n    $$R_T = \\frac{v_{out}}{i_{in}} \\approx \\frac{1}{g_{m2}}$$\n\n**B. Input Impedance ($R_{in} = v_x / i_{in}$)**\nFrom the KCL at $V_{out}$, we know $v_x \\approx \\frac{v_{out}}{g_{m1}r_{o1}}$.\nSubstitute $v_{out} \\approx \\frac{i_{in}}{g_{m2}}$ into this equation:\n$$v_x \\approx \\frac{i_{in} / g_{m2}}{g_{m1}r_{o1}} = \\frac{i_{in}}{g_{m1}g_{m2}r_{o1}}$$\n$$R_{in} = \\frac{v_x}{i_{in}} \\approx \\frac{1}{g_{m1}g_{m2}r_{o1}}$$\n*(The feedback loop drastically reduces the input impedance, making it an excellent current receiver).*\n\n**C. Output Impedance ($R_{out}$)**\nDue to the shunt voltage feedback at the output node, the output impedance is also reduced by the loop gain.\n$$R_{out} \\approx \\frac{1}{g_{m2}}$$\n\n### Summary of Characteristics\n*   **Function:** High-performance Transimpedance Amplifier (Current-to-Voltage converter).\n*   **Gain:** The transimpedance gain is well-defined and set primarily by the transconductance of the feedback transistor $M_2$ ($R_T \\approx 1/g_{m2}$).\n*   **Input Impedance:** Extremely low ($R_{in} \\approx 1 / (g_{m1}g_{m2}r_{o1})$), which is ideal for absorbing current from high-impedance sources (like photodiodes) without creating large voltage swings at the input.",
        "format": "markdown",
        "sha256": "218406cf39aab0eac8054394cf9bf4b938302301c1f8f78d797920f235212138"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, traces the loop back to the input node, and gives the low input resistance and transimpedance near 1/gm2. These satisfy the golden solution’s full-credit rule.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 26031,
        "total_tokens": 28207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22436,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 12909,
        "total_tokens": 13997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11371,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its structure, operation, and small-signal characteristics.\n\n### 1. Circuit Topology and Component Roles\nThe circuit is a **Transimpedance Amplifier (TIA)**, which converts an input current ($I_{in}$) into an output voltage ($V_{out}$). It employs a **shunt-shunt negative feedback** topology to achieve specific performance characteristics, most notably an extremely low input impedance.\n\n*   **$M_1$ (NMOS):** Acts as a **common-gate** amplifier. It is the primary forward-gain stage. Its gate is biased at a constant DC voltage $V_b$.\n*   **$M_2$ (PMOS):** Acts as a **common-source** amplifier in the feedback path. It senses the output voltage $V_{out}$ and feeds a current back to the input node.\n*   **$I_1$:** An ideal DC current source that biases $M_1$.\n*   **Bottom Current Source:** A DC bias current source that, along with $M_2$, sets the operating point for the input node.\n*   **$I_{in}$:** The AC input signal current.\n*   **$V_{out}$:** The AC output signal voltage.\n\n### 2. Qualitative Operation (The Feedback Loop)\nTo understand how the circuit works, let's trace a signal through the feedback loop. Assume a small increase in the input current $I_{in}$:\n1.  The increased current pushes into the common node (let's call it $V_x$, the source of $M_1$), causing the voltage $V_x$ to **rise**.\n2.  Because the gate of $M_1$ is fixed at $V_b$, an increase in $V_x$ decreases the gate-to-source voltage ($V_{GS1} = V_b - V_x$).\n3.  This causes $M_1$ to conduct **less** current.\n4.  Since the top current source $I_1$ provides a constant current, the \"excess\" current that $M_1$ is no longer sinking must flow into the parasitic capacitance at the $V_{out}$ node, causing $V_{out}$ to **rise**.\n5.  $V_{out}$ is connected to the gate of the PMOS transistor $M_2$. As $V_{out}$ rises, the source-to-gate voltage of $M_2$ ($V_{SG2} = V_{DD} - V_{out}$) decreases.\n6.  This causes $M_2$ to conduct **less** current down into node $V_x$.\n7.  The reduction in current from $M_2$ counteracts the initial increase from $I_{in}$, causing $V_x$ to **fall** back toward its original value.\n\nThis is a classic **negative feedback** mechanism that stabilizes the input node voltage.\n\n### 3. Small-Signal Analysis\nWe can derive the key performance metrics using small-signal analysis. Let $g_{m1}, g_{m2}$ be the transconductances and $r_{o1}, r_{o2}$ be the output resistances of $M_1$ and $M_2$, respectively. Assume the current sources are ideal (infinite AC impedance).\n\n**A. Transimpedance Gain ($R_T = v_{out} / i_{in}$)**\nBecause this is a shunt-shunt feedback amplifier with a high open-loop gain, the closed-loop transimpedance is approximately determined by the feedback network ($M_2$).\nThe feedback factor $\\beta$ is the transconductance of $M_2$ (converting $v_{out}$ back to a current): $\\beta \\approx g_{m2}$.\nTherefore, the ideal closed-loop gain is:\n$$R_T \\approx \\frac{1}{\\beta} = \\frac{1}{g_{m2}}$$\n*(A rigorous nodal analysis confirms this: $R_T = \\frac{1}{g_{m2} + \\frac{1}{r_{o2}(1+g_{m1}r_{o1})}} \\approx \\frac{1}{g_{m2}}$)*\n\n**B. Input Impedance ($R_{in}$)**\nA standard common-gate amplifier has an input impedance of roughly $1/g_{m1}$. However, the negative feedback in this circuit drastically reduces this value. The feedback loop gain is approximately $T \\approx g_{m1} r_{o1} g_{m2} r_{o2}$.\nThe closed-loop input impedance is the open-loop impedance divided by $(1+T)$:\n$$R_{in} \\approx \\frac{r_{o2}}{g_{m1} r_{o1} g_{m2} r_{o2}} = \\frac{1}{g_{m1} g_{m2} r_{o1}}$$\nThis is an **extremely low** input impedance, making it an excellent \"virtual ground\" for current inputs.\n\n**C. Output Impedance ($R_{out}$)**\nShunt feedback at the output also reduces the output impedance.\n$$R_{out} \\approx \\frac{1}{g_{m2}}$$\n\n### 4. Summary and Applications\n*   **Function:** Active-feedback Transimpedance Amplifier (TIA).\n*   **Key Feature:** It provides an exceptionally low input impedance ($\\approx \\frac{1}{g_{m1} g_{m2} r_{o1}}$), much lower than a simple common-gate stage.\n*   **Application:** This topology is highly valuable in high-speed optical receivers or current-mode circuits. In optical receivers, the input is connected to a photodiode, which has a large parasitic capacitance ($C_{pd}$). A standard amplifier would create a low-frequency pole ($1 / R_{in}C_{pd}$), limiting bandwidth. By using this circuit to crush the input impedance $R_{in}$ to near zero, that pole is pushed to a very high frequency, significantly extending the bandwidth of the system.\n*   **Trade-off:** The transimpedance gain ($1/g_{m2}$) is relatively low, meaning this stage is typically used purely as an input current buffer/converter, followed by subsequent voltage amplification stages to achieve the desired overall signal level.",
        "format": "markdown",
        "sha256": "154db9e60b83226348c5a9299499541d558be30d1195edd4a664137f3294c657"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, describes feedback to the input node, and gives the low input-resistance and approximately 1/gm2 transimpedance/output-resistance results.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 32878,
        "total_tokens": 35054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29721,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 15492,
        "total_tokens": 16580,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14126,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on circuit theory, the answer is **No**, the circuit will not fail to oscillate if the capacitors become arbitrarily large. It will simply oscillate at a much lower frequency.\n\nHere is the step-by-step explanation of why:\n\n### 1. The Oscillation Conditions (Barkhausen Criterion)\nFor a circuit to oscillate, it must satisfy two conditions at a specific frequency ($\\omega_{osc}$):\n1.  **Phase Shift:** The total phase shift around the loop must be $360^\\circ$ (or $0^\\circ$).\n2.  **Loop Gain:** The magnitude of the loop gain must be $\\ge 1$.\n\n### 2. Analyzing the Ring Oscillator\nThis is a 3-stage ring oscillator. Each inverter provides a DC phase shift of $180^\\circ$ (inversion). Three inverters give $3 \\times 180^\\circ = 540^\\circ$, which is equivalent to $180^\\circ$. \nTo get the required $360^\\circ$ for positive feedback, the RC delay of the stages must provide an additional $180^\\circ$ of phase shift. \n\nSince there are 3 identical stages, each stage must contribute exactly **$60^\\circ$** of phase shift at the oscillation frequency ($3 \\times 60^\\circ = 180^\\circ$).\n\n### 3. The Math\nWe can model each inverter as an amplifier with a DC gain of $-A_0$ and a single pole determined by its output resistance ($R_{out}$) and the load capacitance ($C_L$).\nThe transfer function of one stage is:\n$$H(j\\omega) = \\frac{-A_0}{1 + j\\omega R_{out}C_L}$$\n\n**Finding the Frequency:**\nWe need the phase of the denominator to be $-60^\\circ$:\n$$\\angle(1 + j\\omega R_{out}C_L) = \\arctan(\\omega R_{out}C_L) = 60^\\circ$$\nSince $\\tan(60^\\circ) = \\sqrt{3}$, the oscillation frequency is:\n$$\\omega_{osc} = \\frac{\\sqrt{3}}{R_{out}C_L}$$\n*Notice that as $C_L$ becomes arbitrarily large, the frequency $\\omega_{osc}$ simply becomes arbitrarily small.*\n\n**Checking the Gain:**\nNow we check if the loop gain is sufficient at this frequency. The magnitude of the gain for one stage at $\\omega_{osc}$ is:\n$$|H(j\\omega_{osc})| = \\frac{A_0}{\\sqrt{1^2 + (\\sqrt{3})^2}} = \\frac{A_0}{\\sqrt{1 + 3}} = \\frac{A_0}{2}$$\n\nFor the 3-stage loop, the total gain must be $\\ge 1$:\n$$|H_{loop}| = \\left(\\frac{A_0}{2}\\right)^3 = \\frac{A_0^3}{8} \\ge 1$$\n$$A_0 \\ge 2$$\n\n### Conclusion\nThe condition for the circuit to oscillate is that the intrinsic gain of the inverters ($A_0$) must be at least 2. **This gain requirement is completely independent of the capacitor value $C_L$.** \n\nTherefore, making the capacitors arbitrarily large will only increase the delay of each stage, causing the circuit to oscillate arbitrarily slowly, but it will not stop it from oscillating.",
        "format": "markdown",
        "sha256": "e0ee49d193b8825b283b00a9e08e44de53517baf3072aaee9c6372bb527b8613"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes the ring continues oscillating at a lower frequency and shows that increasing all three capacitors lowers the pole and oscillation frequency without changing the required per-stage gain.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2218,
        "output_tokens": 6393,
        "total_tokens": 8611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4831,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 3200,
        "total_tokens": 4309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the principles of electronics, the answer is **No**, the circuit will not fail to oscillate.\n\nHere is the step-by-step explanation:\n\n1.  **Circuit Topology:** The circuit is a **ring oscillator** consisting of an odd number (three) of inverting stages.\n2.  **Logical Instability:** Because there is an odd number of inversions, the circuit has no stable DC operating point. If you assume the input to the first inverter is a logic \"1\", it will propagate through the loop and arrive back at the input as a logic \"0\", forcing the state to change. This logical contradiction guarantees oscillation.\n3.  **Role of Capacitors:** The load capacitors ($C_L$) at each node determine the propagation delay of each inverter stage. It takes time for the inverter to charge and discharge these capacitors to the threshold voltage of the next stage.\n4.  **Effect of Large Capacitors:** The oscillation frequency is inversely proportional to this delay ($f \\propto 1/C_L$). If the capacitors become arbitrarily large, it will simply take an arbitrarily long time to charge and discharge them.\n5.  **Conclusion:** Making the capacitors larger will decrease the frequency of oscillation, potentially making it extremely slow, but it will not stop the circuit from oscillating because the fundamental logical instability remains.\n\n*(Note: From a small-signal analysis perspective, the condition for oscillation startup—requiring each inverter to have a voltage gain greater than 2—is independent of the load capacitance. The capacitance only dictates the frequency at which the required phase shift occurs.)*",
        "format": "markdown",
        "sha256": "99965f53175af11d70dfc03fb1b4b42a04724f88b65058f5e31fdae0feb6c3e9"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes the ring continues oscillating at a lower frequency and supports this with the valid delay scaling and load-independent small-signal condition. The simplified logical-instability phrasing does not undermine the correct core explanation.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2218,
        "output_tokens": 5846,
        "total_tokens": 8064,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4707,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 2653,
        "total_tokens": 3762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on theoretical circuit analysis, **no, the circuit does not fail to oscillate** if the three capacitors become arbitrarily large.\n\nHere is the step-by-step explanation of why:\n\n1.  **Oscillation Conditions (Barkhausen Criterion):** For a ring oscillator to work, it must satisfy two conditions at the oscillation frequency:\n    *   The total phase shift around the loop must be $360^\\circ$ (or $180^\\circ$ from the frequency-dependent delay + $180^\\circ$ from the DC inversion of the odd number of stages).\n    *   The magnitude of the loop gain must be $\\ge 1$.\n\n2.  **Phase Shift Requirement:** In a 3-stage ring oscillator, each of the three inverter stages must contribute exactly $60^\\circ$ of phase shift to reach the required $180^\\circ$ total ($3 \\times 60^\\circ = 180^\\circ$).\n\n3.  **Modeling a Stage:** Each inverter driving a capacitor $C_L$ can be modeled as a simple low-pass filter with a DC gain of $A_0$ and an output resistance $R$. The transfer function for one stage is:\n    $$H(j\\omega) = \\frac{-A_0}{1 + j\\omega R C_L}$$\n    The phase shift of this stage is $180^\\circ - \\arctan(\\omega R C_L)$. For the frequency-dependent part to be $60^\\circ$, we need:\n    $$\\arctan(\\omega R C_L) = 60^\\circ$$\n    $$\\omega R C_L = \\tan(60^\\circ) = \\sqrt{3}$$\n    This tells us the oscillation frequency will be $\\omega = \\frac{\\sqrt{3}}{R C_L}$. As $C_L$ gets arbitrarily large, the frequency simply gets arbitrarily small (it oscillates very slowly).\n\n4.  **Gain Requirement:** Now we check the gain at this specific oscillation frequency. The magnitude of the gain for one stage is:\n    $$|H(j\\omega)| = \\frac{A_0}{\\sqrt{1 + (\\omega R C_L)^2}}$$\n    Substituting $\\omega R C_L = \\sqrt{3}$ into the equation:\n    $$|H(j\\omega)| = \\frac{A_0}{\\sqrt{1 + (\\sqrt{3})^2}} = \\frac{A_0}{\\sqrt{1 + 3}} = \\frac{A_0}{2}$$\n    For the whole 3-stage loop to oscillate, the total loop gain must be at least 1:\n    $$\\left(\\frac{A_0}{2}\\right)^3 \\ge 1 \\implies A_0 \\ge 2$$\n\n**Conclusion:**\nThe condition for the circuit to oscillate is simply that the DC gain of each inverter ($A_0$) must be at least 2. Notice that **$C_L$ completely cancels out of this gain requirement**. Therefore, making the capacitors arbitrarily large will only lower the frequency of the oscillation, but it will not cause the circuit to stop oscillating.",
        "format": "markdown",
        "sha256": "e483cf6171b2ac3d7421918fb73d00b56393ad7ec57a1a47cd11691f6d4b6952"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency as all three capacitors increase. The small-signal phase and gain analysis shows the oscillation condition is independent of capacitance, matching the golden solution.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2219,
        "output_tokens": 5608,
        "total_tokens": 7827,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4068,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2560,
        "total_tokens": 3670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1881,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the principles of oscillator design, if the three load capacitors ($C_L$) in this ring oscillator are doubled, the **phase noise will decrease (improve)**. Specifically, at a given absolute offset frequency, the phase noise will improve by approximately **6 dB** (a factor of 4).\n\nHere is the step-by-step breakdown of why this happens:\n\n### 1. Effect on Oscillation Frequency ($f_0$)\nThe frequency of a ring oscillator is inversely proportional to the delay of each stage. The delay ($t_d$) is determined by how long it takes the inverters to charge and discharge the load capacitance ($C_L$).\n*   $t_d \\propto C_L$\n*   $f_0 \\propto \\frac{1}{C_L}$\n\nIf you double $C_L$, the delay of each stage doubles, and the **oscillation frequency ($f_0$) is halved**.\n\n### 2. Effect on Timing Jitter ($\\sigma_T^2$)\nPhase noise in the frequency domain is caused by timing jitter in the time domain. Jitter occurs because thermal noise creates voltage fluctuations on the capacitors, which changes the exact moment the next inverter triggers.\n*   The thermal noise voltage variance on a capacitor is $v_n^2 = \\frac{kT}{C_L}$. (Notice that larger capacitors have *less* voltage noise).\n*   The slew rate (how fast the voltage changes) is proportional to $\\frac{1}{C_L}$.\n*   Timing jitter variance ($\\sigma_T^2$) is roughly the noise voltage divided by the slew rate squared: $\\sigma_T^2 \\propto \\frac{v_n^2}{\\text{Slew Rate}^2} \\propto \\frac{1/C_L}{(1/C_L)^2} = C_L$.\n\nSo, doubling $C_L$ actually **doubles the absolute timing jitter variance** per cycle.\n\n### 3. Combining to find Phase Noise ($\\mathcal{L}$)\nThe phase noise $\\mathcal{L}(\\Delta f)$ at a specific offset frequency ($\\Delta f$) relates the oscillation frequency and the jitter variance through this standard formula:\n$$ \\mathcal{L}(\\Delta f) \\propto \\frac{f_0^3 \\cdot \\sigma_T^2}{\\Delta f^2} $$\n\nIf we substitute the relationships we found above ($f_0 \\propto \\frac{1}{C_L}$ and $\\sigma_T^2 \\propto C_L$):\n$$ \\mathcal{L}(\\Delta f) \\propto \\frac{(1/C_L)^3 \\cdot C_L}{\\Delta f^2} = \\frac{1}{C_L^2 \\cdot \\Delta f^2} $$\n\n### Conclusion\nBecause the phase noise is proportional to $\\frac{1}{C_L^2}$, **doubling the capacitance ($2C_L$) results in $\\frac{1}{4}$ the phase noise power**. \n\nIn decibels, a reduction by a factor of 4 is a **6 dB improvement**. \n\n*Intuitive summary: A larger capacitor stores more signal energy ($\\frac{1}{2}CV^2$), making the oscillator's waveform more robust against the random thermal noise ($kT$) of the circuit, resulting in a cleaner, lower-noise signal (albeit at a lower frequency).*",
        "format": "markdown",
        "sha256": "a43126b1cdf04400187f1c27fad5d605ee918187635b0435fafcdc33712616c5"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by about a factor of four (6 dB) at a fixed absolute offset, meeting the full-credit rule.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2216,
        "output_tokens": 10736,
        "total_tokens": 12952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 5490,
        "total_tokens": 6598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4769,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the principles of oscillator design, here is what happens to the phase noise if the three load capacitors ($C_L$) are doubled:\n\n### **Short Answer**\nThe phase noise of the oscillator will **improve (decrease) by 6 dB** at a given absolute offset frequency (e.g., at a 1 MHz offset).\n\n---\n\n### **Detailed Explanation**\n\nTo understand why, we have to look at how changing the capacitance affects both the oscillation frequency and the circuit's sensitivity to noise.\n\n**1. Effect on Oscillation Frequency ($f_{osc}$)**\nIn a ring oscillator, the frequency is inversely proportional to the delay of each stage. The delay is determined by how fast the transistors can charge and discharge the load capacitors ($C_L$).\n*   $f_{osc} \\propto \\frac{1}{C_L}$\n*   If you double $C_L$, the oscillation frequency is **halved**.\n\n**2. Effect on Phase Noise ($\\mathcal{L}$)**\nPhase noise at a specific offset frequency ($\\Delta f$) can be modeled by looking at how much timing jitter is caused by the thermal noise of the transistors. \n\n*   **Intuitive approach:** A larger capacitor holds more charge ($Q = C \\times V$). If the transistors inject the same amount of random noise current into the node, a larger capacitor will experience a smaller voltage fluctuation ($\\Delta V = \\frac{1}{C} \\int i_{noise} dt$). Because the voltage is \"stiffer,\" the noise causes less timing error (jitter) relative to the total cycle time.\n*   **Mathematical approach:** The phase noise of a ring oscillator at a fixed absolute offset frequency $\\Delta f$ follows this proportionality:\n    $$\\mathcal{L}(\\Delta f) \\propto \\frac{f_{osc}^3}{\\Delta f^2} \\times \\text{Jitter Variance}$$\n    While the absolute jitter variance per cycle actually *increases* slightly with larger capacitors (because the edges are slower), the $f_{osc}^3$ term dominates. \n    \n    When you work through the full derivation (substituting $f_{osc} \\propto 1/C_L$ and Jitter $\\propto C_L$), the relationship simplifies to:\n    $$\\mathcal{L}(\\Delta f) \\propto \\frac{1}{C_L^2}$$\n\n**Conclusion**\nBecause phase noise is inversely proportional to the square of the load capacitance:\n*   New Phase Noise $\\propto \\frac{1}{(2C_L)^2} = \\frac{1}{4C_L^2}$\n*   The phase noise power is reduced by a factor of 4.\n*   In decibels, $10 \\times \\log_{10}(1/4) \\approx \\mathbf{-6 \\text{ dB}}$.\n\n*(Note: This assumes you are measuring the phase noise at a fixed absolute offset, like 1 MHz, and that the transistor sizes and bias currents remain unchanged).*",
        "format": "markdown",
        "sha256": "40b23bd73ff38203aece01d4bd5a534f385f025eb1d433008013d8c8801979dd"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by about 6 dB at a fixed absolute offset, matching the golden solution’s full-credit rule.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2216,
        "output_tokens": 9125,
        "total_tokens": 11341,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 4451,
        "total_tokens": 5559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3817,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the principles of oscillator design, if the three load capacitors ($C_L$) in this ring oscillator are doubled, **the phase noise will decrease (improve) by 6 dB at a given absolute offset frequency.**\n\nHere is the step-by-step technical explanation of why this happens:\n\n### 1. Effect on Oscillation Frequency ($f_0$)\nThe frequency of a ring oscillator is determined by the delay of its stages. The delay ($\\tau_d$) of each inverter stage is directly proportional to the load capacitance it must drive:\n$$\\tau_d \\propto C_L$$\nThe total oscillation frequency is $f_0 = \\frac{1}{2 \\cdot N \\cdot \\tau_d}$ (where $N=3$).\nTherefore, if you double $C_L$, the delay doubles, and **the oscillation frequency is halved** ($f_0 \\rightarrow f_0 / 2$).\n\n### 2. Effect on Phase Noise ($\\mathcal{L}$)\nTo understand the impact on phase noise, we can look at standard phase noise models (such as Hajimiri's time-variant model or standard linear models). \n\nPhase noise at a specific offset frequency ($\\Delta f$) is inversely proportional to the square of the maximum signal charge ($q_{max}$) swinging on the capacitors:\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{\\overline{i_n^2}}{q_{max}^2 \\cdot \\Delta f^2}$$\n\n*   **Noise Current ($\\overline{i_n^2}$):** The noise is generated by the transistors inside the inverters. Since we are only changing the explicit capacitors and not the transistors, the noise current injected into the nodes remains constant.\n*   **Maximum Charge ($q_{max}$):** The charge on the capacitor is $q_{max} = C_L \\cdot V_{swing}$. Assuming the voltage swing ($V_{swing}$, usually rail-to-rail $V_{DD}$) remains constant, doubling $C_L$ means **$q_{max}$ is doubled**.\n\nBecause $q_{max}$ is squared in the denominator of the phase noise equation, doubling it reduces the phase noise by a factor of 4:\n$$\\text{New Phase Noise} = \\frac{1}{2^2} = \\frac{1}{4} \\text{ of original}$$\n\n### 3. Converting to Decibels (dB)\nA reduction by a factor of 4 in power corresponds to a -6 dB change:\n$$10 \\cdot \\log_{10}\\left(\\frac{1}{4}\\right) \\approx -6.02 \\text{ dB}$$\n\n### Summary\nBy doubling the capacitors, you are storing twice as much signal energy (charge) at the nodes while the noise injected by the transistors remains the same. This higher \"signal-to-noise\" ratio makes the oscillator's phase more robust against perturbations, resulting in a **6 dB improvement in phase noise**, at the cost of the oscillator running at half its original speed.",
        "format": "markdown",
        "sha256": "f7339fa29f7806c5475437695e94a5d77dabfadd7c06da714b0e2fd47ca927f4"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by a factor of four (about 6 dB) at a fixed absolute offset, with a charge-based justification.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2216,
        "output_tokens": 9256,
        "total_tokens": 11472,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7899,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 3664,
        "total_tokens": 4772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the principles of oscillator design, **yes, the circuit will fail to oscillate if $C_L$ becomes arbitrarily large.**\n\nHere is the step-by-step explanation of why this happens, using the **Barkhausen criteria** for oscillation.\n\nFor a circuit to oscillate, it must satisfy two conditions at a specific frequency ($\\omega_{osc}$):\n1.  **Phase Condition:** The total phase shift around the loop must be $360^\\circ$ (or $0^\\circ$). Since the three inverting stages provide $180^\\circ$ of DC phase shift (negative feedback), the frequency-dependent poles of the circuit must provide an additional **$180^\\circ$** of phase shift.\n2.  **Gain Condition:** The magnitude of the loop gain at that frequency must be greater than or equal to 1 ($|A\\beta| \\ge 1$).\n\n### 1. Analyzing the Phase\nLet's model each inverter as having a finite output resistance ($R$) and some intrinsic parasitic capacitance ($C_p$).\n*   The second and third nodes have a time constant of $\\tau = R \\cdot C_p$.\n*   The first node has a time constant of $\\tau_L = R \\cdot (C_p + C_L)$.\n\nIf $C_L$ becomes arbitrarily large ($C_L \\to \\infty$), the pole at the first node moves very close to DC ($\\omega \\to 0$).\nBecause this pole is at such a low frequency, for any practical high frequency, this node acts like an ideal integrator and contributes exactly **$90^\\circ$** of phase shift.\n\nTo satisfy the phase condition (needing $180^\\circ$ total from the poles), the remaining two stages must make up the difference:\n$$180^\\circ (\\text{Total needed}) - 90^\\circ (\\text{from Stage 1}) = 90^\\circ$$\n\nSince stages 2 and 3 are identical, they must contribute **$45^\\circ$ each**. A single-pole RC low-pass filter contributes $45^\\circ$ of phase shift exactly at its cutoff frequency. Therefore, the circuit *wants* to oscillate at the frequency determined by the fast, unloaded stages: $\\omega_{osc} = 1 / (R \\cdot C_p)$.\n\n### 2. Analyzing the Gain\nNow we must check the gain at this required oscillation frequency ($\\omega_{osc}$).\n\nBecause $C_L$ is arbitrarily large, its impedance ($Z_c = 1 / j\\omega C_L$) at the relatively high frequency of $\\omega_{osc}$ is practically **zero**.\nThe first stage is essentially driving an AC short circuit to ground.\n\nBecause the signal is so heavily attenuated by the massive capacitor at the frequency required for the correct phase shift, the gain of the first stage drops to nearly zero.\nConsequently, the total loop gain drops well below 1:\n$$|Loop Gain| \\ll 1$$\n\n### Conclusion\nBecause the loop gain falls below 1, the Barkhausen gain criterion is violated. The large capacitor filters out the high-frequency signal needed to maintain the $180^\\circ$ phase shift, causing any oscillation to dampen and die out. The circuit will simply settle at its DC bias point.",
        "format": "markdown",
        "sha256": "dc3c3a57d1649360af981cb4b03d83c1f01c19a010ae00dd6922d0aedd3edcb0"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading can stop oscillation and explains the dominant pole, phase condition, and resulting loop-gain collapse. The simplified phase and frequency estimates are consistent with the essential mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2214,
        "output_tokens": 9044,
        "total_tokens": 11258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7605,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 3136,
        "total_tokens": 4243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit will fail to oscillate if $C_L$ becomes arbitrarily large.**\n\nHere is the step-by-step technical explanation of why this happens, based on the **Barkhausen criteria** for oscillation.\n\nFor a circuit to oscillate, it must satisfy two conditions at a specific frequency ($\\omega$):\n1.  **Phase Shift:** The total phase shift around the loop must be $360^\\circ$ (or $0^\\circ$).\n2.  **Loop Gain:** The magnitude of the loop gain must be $\\ge 1$.\n\n### 1. Phase Analysis\nA standard ring oscillator uses an odd number of inverters (three in this case). The inversion of the three stages provides a DC phase shift of $180^\\circ$ (since $-1 \\times -1 \\times -1 = -1$). \n\nTo achieve the required $360^\\circ$ for oscillation, the internal RC delays (poles) of the three stages must provide an additional **$180^\\circ$ of frequency-dependent phase shift**.\n\nLet's model the three stages:\n*   **Stage 1 (with $C_L$):** This stage has a massive capacitor. As $C_L \\to \\infty$, the pole frequency of this stage approaches $0$ Hz. In an AC analysis, a pole at $0$ Hz provides exactly **$90^\\circ$ of phase shift** at any non-zero frequency.\n*   **Stages 2 & 3:** These are standard inverters with small intrinsic parasitic capacitances. To make up the remaining phase shift required for oscillation ($180^\\circ - 90^\\circ = 90^\\circ$), these two stages must provide **$45^\\circ$ of phase shift each**.\n\nFor a simple RC pole to provide a $45^\\circ$ phase shift, the operating frequency must be exactly equal to its pole frequency ($\\omega = 1/RC$). Therefore, the required oscillation frequency is fixed by the intrinsic delays of Stages 2 and 3.\n\n### 2. Gain Analysis\nNow we must check the second Barkhausen criterion: is the loop gain $\\ge 1$ at this specific frequency?\n\n*   At the required oscillation frequency determined above, the capacitor $C_L$ is arbitrarily large.\n*   The AC impedance of a capacitor is $Z_C = \\frac{1}{j\\omega C_L}$. \n*   As $C_L \\to \\infty$, the impedance $Z_C \\to 0$. \n\nBecause the impedance is practically zero, $C_L$ acts as an **AC short to ground**. It completely filters out the high-frequency signal trying to pass from the first inverter to the second. \n\nThe AC gain of the first stage drops to zero. Consequently, the total loop gain (Gain 1 × Gain 2 × Gain 3) drops well below 1. \n\n### Conclusion\nBecause the massive capacitor kills the AC gain at the frequency required to achieve the correct phase shift, the Barkhausen gain criterion is not met. The signal will simply decay, and **the circuit will fail to oscillate.** (In practice, the output of the first inverter will just get stuck at a stable DC voltage near the switching threshold).",
        "format": "markdown",
        "sha256": "e6904c8b5037c4f5b220e4f6bc64ffa151cf4d45b0438e615db54c0726898d4b"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large CL at one node creates a dominant pole, heavily shunts the signal, and drives loop gain below unity so oscillation fails. The precise phase and frequency estimates are secondary.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2214,
        "output_tokens": 7469,
        "total_tokens": 9683,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6099,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 3809,
        "total_tokens": 4916,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, the circuit will fail to oscillate if $C_L$ becomes arbitrarily large.\n\nHere is the step-by-step explanation based on the **Barkhausen stability criterion**, which states that for a circuit to oscillate, two conditions must be met at the oscillation frequency ($\\omega_{osc}$):\n1.  **Phase shift:** The total phase shift around the loop must be $360^\\circ$ (or $0^\\circ$). Since the three inverting stages provide a DC phase shift of $-180^\\circ$, the frequency-dependent poles of the circuit must provide an additional $-180^\\circ$ of phase shift.\n2.  **Loop gain:** The magnitude of the loop gain must be $\\ge 1$.\n\n### 1. Phase Analysis\nLet's model each inverter as having a DC gain of $A_0$ and an intrinsic pole at frequency $\\omega_p$.\n*   Stages 2 and 3 have poles at $\\omega_p$.\n*   Stage 1 has a massive capacitor $C_L$ added to its output. Its pole is at $\\omega_{p1} = \\frac{1}{R_{out}(C_{intrinsic} + C_L)}$.\n\nAs $C_L$ becomes arbitrarily large ($C_L \\to \\infty$), the pole of the first stage approaches zero ($\\omega_{p1} \\to 0$).\nWhen a pole is at (or very near) zero, that stage acts as an ideal integrator. At any practical frequency, it will provide a constant phase shift of **$-90^\\circ$**.\n\nTo satisfy the Barkhausen phase criterion, the total phase shift from the poles must be $-180^\\circ$.\n$$ \\phi_{total} = \\phi_1 + \\phi_2 + \\phi_3 = -180^\\circ $$\n$$ -90^\\circ + \\phi_2 + \\phi_3 = -180^\\circ $$\n$$ \\phi_2 + \\phi_3 = -90^\\circ $$\n\nAssuming stages 2 and 3 are identical, they must each provide $-45^\\circ$ of phase shift. The phase shift of a single pole is given by $\\phi = -\\arctan(\\omega/\\omega_p)$.\n$$ -\\arctan(\\omega_{osc}/\\omega_p) = -45^\\circ $$\n$$ \\omega_{osc}/\\omega_p = 1 \\implies \\omega_{osc} = \\omega_p $$\nSo, the circuit *would* try to oscillate at the frequency $\\omega_p$.\n\n### 2. Gain Analysis\nNow we must check if the loop gain is $\\ge 1$ at this frequency ($\\omega_{osc} = \\omega_p$).\nThe gain magnitude of a single stage is $|A| = \\frac{A_0}{\\sqrt{1 + (\\omega/\\omega_{pole})^2}}$.\n\n*   **Gain of Stage 2 and 3:** At $\\omega = \\omega_p$, the gain is $\\frac{A_0}{\\sqrt{1 + 1^2}} = \\frac{A_0}{\\sqrt{2}}$.\n*   **Gain of Stage 1:** At $\\omega = \\omega_p$, the gain is $\\frac{A_0}{\\sqrt{1 + (\\omega_p/\\omega_{p1})^2}}$.\n\nRemember that as $C_L \\to \\infty$, $\\omega_{p1} \\to 0$. Therefore, the ratio $(\\omega_p/\\omega_{p1})$ approaches infinity.\nThis means the gain of the first stage approaches **zero**:\n$$ |A_1| \\approx \\frac{A_0}{\\infty} \\to 0 $$\n\n### Conclusion\nThe total loop gain is the product of the gains of the three stages:\n$$ |Loop Gain| = |A_1| \\times |A_2| \\times |A_3| $$\n$$ |Loop Gain| = 0 \\times \\frac{A_0}{\\sqrt{2}} \\times \\frac{A_0}{\\sqrt{2}} = 0 $$\n\nBecause the loop gain drops to 0 (which is strictly less than 1), the Barkhausen gain criterion is violated. The signal is attenuated entirely by the first stage before it can propagate around the loop, meaning **the circuit fails to oscillate.**",
        "format": "markdown",
        "sha256": "15bbe311bf3bf24759b593a5b24f29186fdce5aa68ac95678a01c62e2d192602"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading on one node creates a dominant low-frequency pole and drives loop gain below unity at the phase condition, preventing oscillation. Its approximate phase and frequency analysis is consistent with the essential mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2214,
        "output_tokens": 7110,
        "total_tokens": 9324,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5306,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 3902,
        "total_tokens": 5009,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram, this is a **3-stage CMOS ring oscillator**.\n\nIf you double the widths ($W$) of all the NMOS and PMOS devices, the phase noise will **decrease by 3 dB** (it is halved).\n\nHere is the step-by-step reasoning:\n\n1.  **Capacitance Doubles:** The total capacitance at each node ($C_{node}$) is dominated by the gate capacitance of the next stage and the drain capacitance of the current stage. Both of these are directly proportional to the transistor width $W$. Therefore, $C_{node} \\rightarrow 2C_{node}$.\n2.  **Current Doubles:** The drive current ($I$) of the transistors is also directly proportional to their width $W$. Therefore, the charging/discharging current $I \\rightarrow 2I$.\n3.  **Frequency Remains Constant:** The oscillation frequency is inversely proportional to the delay of each stage. The delay is roughly $t_d \\propto \\frac{C_{node}}{I}$. Since both capacitance and current double, the delay remains the same ($\\frac{2C}{2I} = \\frac{C}{I}$). Thus, the oscillation frequency $f_{osc}$ does not change.\n4.  **Phase Noise Halves:** Phase noise in an oscillator is generally inversely proportional to the power dissipated for a given frequency.\n    *   The dynamic power is $P = f_{osc} \\cdot C_{total} \\cdot V_{DD}^2$. Since $C_{total}$ doubled and $f_{osc}$ is constant, the power consumption doubles.\n    *   According to standard phase noise models (like Leeson's equation or Hajimiri's model), phase noise $\\mathcal{L}$ is proportional to $\\frac{1}{Power}$.\n    *   Because the power doubled, the phase noise is halved ($\\frac{1}{2}$), which corresponds to a **-3 dB** change.\n\n*(Note: This also holds true for flicker (1/f) noise. Flicker noise power is inversely proportional to the gate area ($W \\times L$). Doubling $W$ halves the 1/f noise power, also resulting in a 3 dB reduction in the close-in phase noise).*",
        "format": "markdown",
        "sha256": "42e6559b71c325df7f58d9c882ed07d917053580878a0f2e2558ef51bffdc3a7"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer gives the correct 3 dB reduction and correctly notes that doubling both node capacitance and drive current leaves the oscillation frequency roughly unchanged. Its extra noise-model comments are not needed for the correct conclusion.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2232,
        "output_tokens": 5834,
        "total_tokens": 8066,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4772,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2766,
        "total_tokens": 3882,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2292,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the principles of CMOS circuit design, here is the step-by-step analysis of what happens when you double the widths of the NMOS and PMOS devices in this 3-stage ring oscillator:\n\n1.  **Effect on Capacitance and Current:**\n    *   Doubling the width ($W$) of the transistors doubles their current-driving capability ($I \\propto W$).\n    *   It also doubles the parasitic capacitances at each node, primarily the gate and drain capacitances ($C \\propto W$).\n\n2.  **Effect on Oscillation Frequency:**\n    *   The oscillation frequency ($f_0$) of a ring oscillator is proportional to the charging/discharging current divided by the node capacitance ($f_0 \\propto I / C$).\n    *   Since both the current and the capacitance double, the oscillation frequency remains **approximately constant**.\n\n3.  **Effect on Phase Noise:**\n    *   Phase noise in an oscillator is inversely proportional to the maximum signal energy stored in the nodes.\n    *   The signal energy at each node is proportional to $C \\cdot V_{swing}^2$.\n    *   Because the voltage swing ($V_{swing}$) remains constant (rail-to-rail, $V_{DD}$ to Ground) and the capacitance ($C$) has doubled, the signal energy doubles.\n    *   Alternatively, looking at the noise: The thermal noise current power of the channel ($\\overline{i_n^2} \\propto g_m$) doubles because transconductance ($g_m$) doubles with width. However, the signal power (related to $Q_{max}^2 = (C \\cdot V)^2$) quadruples. The ratio of noise to signal power ($2/4$) becomes $1/2$.\n\n**Conclusion:**\nBecause the signal energy doubles while the frequency remains constant, the phase noise power is halved. Therefore, the phase noise **decreases by 3 dB**.",
        "format": "markdown",
        "sha256": "632c995de4bc9382e13632eaf121b8dacaf665fd4f17af0fb2a103e55783db36"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that phase noise decreases by about 3 dB and gives a valid scaling argument: device noise power doubles while the signal power scales by four.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2232,
        "output_tokens": 5031,
        "total_tokens": 7263,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4210,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2751,
        "total_tokens": 3867,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, the circuit is a **3-stage CMOS ring oscillator**. \n\nIf you double the widths ($W$) of all the NMOS and PMOS devices, the **phase noise will decrease by 3 dB (it will be halved)**.\n\nHere is the step-by-step reasoning for why this happens:\n\n1.  **Oscillation Frequency Remains Constant:** \n    *   The node capacitance ($C$) is directly proportional to the transistor width ($W$). Doubling $W$ doubles $C$.\n    *   The drive current ($I$) is also directly proportional to $W$. Doubling $W$ doubles $I$.\n    *   The delay of each stage is roughly $\\tau \\approx (C \\cdot V_{swing}) / I$. Since both $C$ and $I$ double, the delay $\\tau$ remains the same, meaning the oscillation frequency ($f_0$) stays approximately constant.\n\n2.  **Noise Current Increases:**\n    *   The thermal noise current variance of a transistor is proportional to its transconductance ($g_m$). \n    *   Since $g_m \\propto W$, doubling the width **doubles** the noise power injected into the nodes.\n\n3.  **Signal Power Increases Faster:**\n    *   In phase noise theory (like the Hajimiri model), phase noise is inversely proportional to the square of the maximum charge swing at the node ($q_{max}^2$).\n    *   $q_{max} = C \\cdot V_{swing}$. Because $C$ doubles, $q_{max}$ doubles.\n    *   Therefore, the \"signal\" term ($q_{max}^2$) **quadruples** ($2^2 = 4$).\n\n4.  **Net Effect on Phase Noise:**\n    *   Phase Noise $\\propto \\frac{\\text{Noise Power}}{\\text{Signal Power}} \\propto \\frac{g_m}{q_{max}^2}$\n    *   Phase Noise $\\propto \\frac{2}{4} = \\frac{1}{2}$\n    \n**Simpler Intuition (Power Dissipation):**\nFor a given topology and frequency, the phase noise of an oscillator is generally inversely proportional to its power dissipation. Doubling the transistor widths doubles the current drawn from $V_{DD}$, thereby doubling the power consumption. Doubling the power halves the phase noise (-3 dB).",
        "format": "markdown",
        "sha256": "9d11d8635ac854adf5b2c95a6487b0812e7e406d13ac05e64d887be3af348d0c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB reduction and supports it with the valid scaling: device noise current power doubles while node charge doubles, making the noise-to-signal ratio halve.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2232,
        "output_tokens": 5233,
        "total_tokens": 7465,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4388,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2854,
        "total_tokens": 3970,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ looking into the supply node of the 3-stage ring oscillator, we need to analyze the circuit at its operating point. \n\n**1. Operating Point Assumption**\nFor a small-signal analysis of an oscillator, we typically assume the circuit is at its metastable equilibrium point. At this point, all internal node voltages are equal to the inverter trip voltage, $V_M$. \n$$V_1 = V_2 = V_3 = V_M$$\nAt this bias point, both the PMOS and NMOS transistors in every inverter are operating in the saturation region.\n\n**2. Small-Signal Model of a Single Inverter**\nLet's apply a small-signal test voltage $v_x$ at the supply node and find the total small-signal current $i_x$ drawn from it. The resistance will be $R_X = v_x / i_x$.\nFor the $k$-th inverter in the ring (where $k \\in \\{1, 2, 3\\}$):\n*   The input voltage is $v_{k-1}$ (with $v_0 = v_3$).\n*   The output voltage is $v_k$.\n*   The PMOS source is connected to the supply node, so its small-signal voltage is $v_x$.\n*   The NMOS source is connected to ground, so its small-signal voltage is $0$.\n\nThe small-signal current flowing from the supply through the PMOS transistor is:\n$$i_{p,k} = g_{mp} v_{sg} + g_{dsp} v_{sd} = g_{mp}(v_x - v_{k-1}) + g_{dsp}(v_x - v_k)$$\nwhere $g_{mp}$ is the PMOS transconductance and $g_{dsp} = 1/r_{op}$ is its output conductance. (We assume the PMOS bulk is tied to the supply, so there is no body effect, $v_{bs}=0$).\n\nThe small-signal current flowing through the NMOS transistor to ground is:\n$$i_{n,k} = g_{mn} v_{gs} + g_{dsn} v_{ds} = g_{mn} v_{k-1} + g_{dsn} v_k$$\nwhere $g_{mn}$ is the NMOS transconductance and $g_{dsn} = 1/r_{on}$ is its output conductance.\n\n**3. Nodal Equations**\nApplying Kirchhoff's Current Law (KCL) at the output node of the $k$-th inverter, the current from the PMOS must equal the current into the NMOS:\n$$i_{p,k} = i_{n,k}$$\n$$g_{mp}(v_x - v_{k-1}) + g_{dsp}(v_x - v_k) = g_{mn} v_{k-1} + g_{dsn} v_k$$\nRearranging the terms to group the voltages:\n$$(g_{mp} + g_{dsp})v_x = (g_{mn} + g_{mp})v_{k-1} + (g_{dsn} + g_{dsp})v_k$$\n\n**4. Solving for the Total Current**\nWe have three such equations for $k=1, 2, 3$. Let's sum them up:\n$$\\sum_{k=1}^{3} (g_{mp} + g_{dsp})v_x = \\sum_{k=1}^{3} \\left[ (g_{mn} + g_{mp})v_{k-1} + (g_{dsn} + g_{dsp})v_k \\right]$$\nSince it's a ring, the sum of the inputs is the same as the sum of the outputs: $\\sum v_{k-1} = \\sum v_k = v_1 + v_2 + v_3$. Let's call this sum $V_{sum}$.\n$$3(g_{mp} + g_{dsp})v_x = (g_{mn} + g_{mp})V_{sum} + (g_{dsn} + g_{dsp})V_{sum}$$\n$$3(g_{mp} + g_{dsp})v_x = (g_{mn} + g_{mp} + g_{dsn} + g_{dsp})V_{sum}$$\nFrom this, we can find $V_{sum}$ in terms of $v_x$:\n$$V_{sum} = \\frac{3(g_{mp} + g_{dsp})}{g_{mn} + g_{mp} + g_{dsn} + g_{dsp}} v_x$$\n\nThe total current $i_x$ drawn from the supply is the sum of the currents through all three PMOS transistors:\n$$i_x = \\sum_{k=1}^{3} i_{p,k} = \\sum_{k=1}^{3} \\left[ g_{mp}(v_x - v_{k-1}) + g_{dsp}(v_x - v_k) \\right]$$\n$$i_x = 3(g_{mp} + g_{dsp})v_x - g_{mp}V_{sum} - g_{dsp}V_{sum} = 3(g_{mp} + g_{dsp})v_x - (g_{mp} + g_{dsp})V_{sum}$$\nSubstitute the expression for $V_{sum}$ into the equation for $i_x$:\n$$i_x = (g_{mp} + g_{dsp}) \\left[ 3v_x - \\frac{3(g_{mp} + g_{dsp})}{g_{mn} + g_{mp} + g_{dsn} + g_{dsp}} v_x \\right]$$\n$$i_x = 3(g_{mp} + g_{dsp})v_x \\left[ 1 - \\frac{g_{mp} + g_{dsp}}{g_{mn} + g_{mp} + g_{dsn} + g_{dsp}} \\right]$$\n$$i_x = 3(g_{mp} + g_{dsp})v_x \\left[ \\frac{g_{mn} + g_{dsn}}{g_{mn} + g_{mp} + g_{dsn} + g_{dsp}} \\right]$$\n\n**5. Calculating the Resistance $R_X$**\nThe small-signal resistance is $R_X = v_x / i_x$:\n$$R_X = \\frac{g_{mn} + g_{mp} + g_{dsn} + g_{dsp}}{3(g_{mp} + g_{dsp})(g_{mn} + g_{dsn})}$$\nWe can split the numerator to simplify the expression:\n$$R_X = \\frac{1}{3} \\left[ \\frac{g_{mn} + g_{dsn}}{(g_{mp} + g_{dsp})(g_{mn} + g_{dsn})} + \\frac{g_{mp} + g_{dsp}}{(g_{mp} + g_{dsp})(g_{mn} + g_{dsn})} \\right]$$\n$$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mp} + g_{dsp}} + \\frac{1}{g_{mn} + g_{dsn}} \\right)$$\nUsing the output resistance notation ($r_{op} = 1/g_{dsp}$ and $r_{on} = 1/g_{dsn}$), we can write this as a combination of parallel resistances:\n$$R_X = \\frac{1}{3} \\left[ \\left( \\frac{1}{g_{mp}} \\parallel r_{op} \\right) + \\left( \\frac{1}{g_{mn}} \\parallel r_{on} \\right) \\right]$$\nIf channel-length modulation is neglected ($r_{op}, r_{on} \\to \\infty$), the expression simplifies to:\n$$R_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mp}} + \\frac{1}{g_{mn}} \\right)$$\n\n**Final Answer:**\nThe small-signal resistance seen looking into the supply node is:\n$$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mp} + g_{dsp}} + \\frac{1}{g_{mn} + g_{dsn}} \\right)$$",
        "format": "markdown",
        "sha256": "74430b8ed425cbadde1d2e7d9b178afcced4907af612881a638644abfdb5ddc8"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static small-signal derivation is internally consistent, but it analyzes the metastable operating point and misses the dominant oscillation-driven charging and discharging of the load capacitances. The golden solution assigns this static gm-based approach a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2224,
        "output_tokens": 31668,
        "total_tokens": 33892,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 17738,
        "total_tokens": 18850,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ seen looking into the supply node of the ring oscillator, we need to perform a small-signal analysis.\n\n**1. Assumptions and Operating Point**\n*   **Small-Signal Analysis:** \"Small-signal\" implies we are analyzing the circuit around a stable DC operating point. For a ring oscillator, this is its metastable point where it is not oscillating, and all node voltages are equal.\n*   **Symmetry:** We assume the three inverter stages are identical. At the metastable DC operating point, the input and output voltages of every inverter are equal to the trip point voltage ($V_{trip}$).\n*   **CMOS Inverters:** We assume standard CMOS inverters consisting of a PMOS transistor connected to the supply and an NMOS transistor connected to ground.\n\n**2. Small-Signal Model of a Single Stage**\nLet's apply a small DC test voltage $v_x$ to the supply node. Because the circuit is perfectly symmetric, this common-mode excitation will cause all three intermediate node voltages to change by the same amount. Let's call this small-signal node voltage $v_o$.\n*   For any given inverter in the ring, its small-signal input voltage is $v_o$ and its small-signal output voltage is also $v_o$.\n*   Since the input is effectively tied to the output ($v_{in} = v_{out} = v_o$), both the PMOS and NMOS transistors act as **diode-connected** devices in this specific small-signal scenario.\n\nLet's define the small-signal parameters for the transistors in one inverter:\n*   $g_{mp}, g_{mn}$: Transconductances of the PMOS and NMOS, respectively.\n*   $g_{dsp}, g_{dsn}$: Output conductances of the PMOS and NMOS, respectively (where $g_{ds} = 1/r_o$).\n\n**3. Deriving the Resistance of One Stage**\nLet's find the resistance of a single \"diode-connected\" inverter stage looking into its supply pin.\n*   The small-signal current $i_{sup}$ entering the inverter from the supply flows through the PMOS transistor. The PMOS source is at $v_x$, gate is at $v_o$, and drain is at $v_o$.\n    $$i_{sup} = g_{mp}(v_x - v_o) + g_{dsp}(v_x - v_o) = (g_{mp} + g_{dsp})(v_x - v_o)$$\n*   This same current must flow through the NMOS transistor to ground. The NMOS gate is at $v_o$, drain is at $v_o$, and source is at $0$.\n    $$i_{gnd} = g_{mn}(v_o - 0) + g_{dsn}(v_o - 0) = (g_{mn} + g_{dsn})v_o$$\n*   By Kirchhoff's Current Law (KCL) at the output node, $i_{sup} = i_{gnd}$:\n    $$(g_{mp} + g_{dsp})(v_x - v_o) = (g_{mn} + g_{dsn})v_o$$\n*   Solving for $v_o$ in terms of $v_x$:\n    $$(g_{mp} + g_{dsp})v_x = (g_{mp} + g_{dsp} + g_{mn} + g_{dsn})v_o$$\n    $$v_o = v_x \\frac{g_{mp} + g_{dsp}}{g_{mp} + g_{dsp} + g_{mn} + g_{dsn}}$$\n*   Now, substitute $v_o$ back into the $i_{sup}$ equation to find the resistance of one stage ($R_1 = v_x / i_{sup}$):\n    $$i_{sup} = (g_{mp} + g_{dsp}) \\left( v_x - v_x \\frac{g_{mp} + g_{dsp}}{g_{mp} + g_{dsp} + g_{mn} + g_{dsn}} \\right)$$\n    $$i_{sup} = v_x (g_{mp} + g_{dsp}) \\left( \\frac{g_{mn} + g_{dsn}}{g_{mp} + g_{dsp} + g_{mn} + g_{dsn}} \\right)$$\n    $$R_1 = \\frac{v_x}{i_{sup}} = \\frac{g_{mp} + g_{dsp} + g_{mn} + g_{dsn}}{(g_{mp} + g_{dsp})(g_{mn} + g_{dsn})}$$\n*   This can be elegantly rewritten as the sum of two resistances:\n    $$R_1 = \\frac{1}{g_{mp} + g_{dsp}} + \\frac{1}{g_{mn} + g_{dsn}}$$\n    *(Intuitively, this is the series combination of the diode-connected PMOS resistance and the diode-connected NMOS resistance).*\n\n**4. Total Resistance $R_X$**\nThe ring oscillator consists of three identical inverter stages connected in parallel to the supply node. Therefore, the total small-signal resistance $R_X$ is one-third of the resistance of a single stage:\n\n$$R_X = \\frac{R_1}{3}$$\n\n$$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mp} + g_{dsp}} + \\frac{1}{g_{mn} + g_{dsn}} \\right)$$\n\nIf we neglect channel-length modulation (assuming $g_{ds} \\approx 0$), the expression simplifies to:\n$$R_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mp}} + \\frac{1}{g_{mn}} \\right)$$",
        "format": "markdown",
        "sha256": "64d05b7163f5eec195942eb9aa5880bf219294382664db4fc722e74f7f794f08"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static, metastable-point analysis is internally consistent, but it misses the dominant oscillation-driven charging and discharging of the load capacitances. The supply resistance is set by that dynamic load, not the proposed gm-based resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2224,
        "output_tokens": 22659,
        "total_tokens": 24883,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20401,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 11406,
        "total_tokens": 12518,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10102,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ seen looking into the supply node of the ring oscillator, we can use a symmetry argument based on the circuit's topology.\n\n**1. Operating Point Assumption**\nFor small-signal analysis, we assume the ring oscillator is biased at its metastable equilibrium point (the \"trip point\"). At this point, all inverters are identical, and their input and output DC voltages are equal ($V_{in} = V_{out} = V_{trip}$).\n\n**2. Symmetry and Common-Mode Response**\nWhen we apply a small-signal test voltage $v_x$ to the supply node, it acts as a common-mode signal to all three identical inverter stages. Because the ring is perfectly symmetric, all internal nodes will respond identically.\nLet the small-signal voltages at the three nodes be $v_1$, $v_2$, and $v_3$. Due to symmetry:\n$$v_1 = v_2 = v_3 = v_{node}$$\nThis means that for every inverter in the ring, its small-signal input voltage is equal to its small-signal output voltage:\n$$v_{in} = v_{out} = v_{node}$$\n\n**3. Analysis of a Single Inverter Stage**\nLet's look at the small-signal model of one CMOS inverter stage under the condition $v_{in} = v_{out} = v_{node}$.\n*   **PMOS Transistor:**\n    *   The source is connected to the supply node ($v_x$).\n    *   The gate is connected to the input ($v_{node}$).\n    *   The drain is connected to the output ($v_{node}$).\n    *   Since the gate and drain are at the same small-signal potential ($v_g = v_d = v_{node}$), the PMOS transistor is effectively **diode-connected** for small signals.\n    *   The small-signal resistance looking into the source of this diode-connected PMOS is:\n        $$R_p = \\frac{1}{g_{m,p} + g_{ds,p}} = \\frac{1}{g_{m,p}} \\parallel r_{o,p}$$\n*   **NMOS Transistor:**\n    *   The source is connected to ground ($0\\text{ V}$).\n    *   The gate is connected to the input ($v_{node}$).\n    *   The drain is connected to the output ($v_{node}$).\n    *   Similarly, since $v_g = v_d = v_{node}$, the NMOS transistor is also effectively **diode-connected**.\n    *   The small-signal resistance looking into the drain of this diode-connected NMOS is:\n        $$R_n = \\frac{1}{g_{m,n} + g_{ds,n}} = \\frac{1}{g_{m,n}} \\parallel r_{o,n}$$\n\nIn each stage, the current from the supply node flows through the PMOS resistance $R_p$ to the intermediate node ($v_{node}$), and then through the NMOS resistance $R_n$ to ground. Therefore, these two resistances are in series.\nThe total small-signal resistance of a single inverter stage is:\n$$R_{stage} = R_p + R_n = \\left( \\frac{1}{g_{m,p}} \\parallel r_{o,p} \\right) + \\left( \\frac{1}{g_{m,n}} \\parallel r_{o,n} \\right)$$\n\n**4. Total Resistance $R_X$**\nThe ring oscillator consists of three such identical stages connected in parallel to the supply node. The total resistance $R_X$ is simply one-third of the resistance of a single stage:\n$$R_X = \\frac{R_{stage}}{3} = \\frac{1}{3} \\left[ \\left( \\frac{1}{g_{m,p}} \\parallel r_{o,p} \\right) + \\left( \\frac{1}{g_{m,n}} \\parallel r_{o,n} \\right) \\right]$$\n\nAssuming the intrinsic gain of the transistors is large ($g_m r_o \\gg 1$), we can approximate $1/g_m \\parallel r_o \\approx 1/g_m$. The expression simplifies to:\n$$R_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{m,p}} + \\frac{1}{g_{m,n}} \\right)$$",
        "format": "markdown",
        "sha256": "3ee3e7735a7bd6287c464401ea56483128157facd400435d491c8604806eeaa8"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer analyzes only a static, symmetric operating point and derives a gm-based resistance. It misses the dominant oscillation-driven charging and discharging of the load capacitances that sets the supply-node resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2224,
        "output_tokens": 27447,
        "total_tokens": 29671,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25594,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 18061,
        "total_tokens": 19173,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes significantly.**\n\nHere is a breakdown of why the original calculation is only valid for a specific non-oscillating state, and why it fails when the circuit oscillates:\n\n### 1. Where the original formula comes from (The Non-Oscillating State)\nThe formula $R_X \\approx \\frac{1}{3} (\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}})$ assumes the ring oscillator is stuck in its **metastable DC operating point**. \n* If the oscillator fails to start, all nodes settle at a voltage roughly equal to $V_{DD}/2$. \n* At this specific voltage, the input of each inverter equals its output ($V_{in} = V_{out}$). \n* Because the gate and drain of the transistors are at the same potential, they effectively act as **diode-connected devices** operating in saturation. \n* The small-signal resistance of one such inverter looking from the supply to ground is indeed roughly $(1/g_{mp} + 1/g_{mn})$. Since there are three in parallel, you divide by 3.\n\n### 2. Why it changes during oscillation (The Large-Signal State)\nWhen the circuit oscillates, it is no longer a small-signal system sitting at $V_{DD}/2$. It becomes a large-signal system where the node voltages swing rail-to-rail (from $0$ to $V_{DD}$).\n\n* **Transistors act as switches:** For the vast majority of the oscillation cycle, the inverters are at logic '1' or logic '0'. \n    * If the input is '1', the NMOS is fully ON (linear region) and the PMOS is fully OFF (cutoff).\n    * If the input is '0', the PMOS is fully ON (linear region) and the NMOS is fully OFF (cutoff).\n* **The path to ground is broken:** Because at least one transistor in every inverter is turned OFF (in cutoff) for most of the cycle, there is no direct DC path from the supply to ground. \n* **The \"diode-connected\" assumption fails:** Because the input and output of the inverters are swinging out of phase, $V_{in} \\neq V_{out}$. Therefore, the transistors are **not** diode-connected.\n\n### Conclusion\nDuring oscillation, the concept of a static small-signal resistance based on saturation $g_m$ becomes invalid. The resistance looking into the supply node ($R_X$) would appear **much higher** than the formula suggests, because the DC current path is blocked by OFF transistors for most of the cycle (current is only drawn dynamically to charge/discharge capacitors and during the brief moments of switching crossover).",
        "format": "markdown",
        "sha256": "bae55599b325074081c8eaf21d4380c07a7ec4cac9e40b343361346c938d8862"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that oscillation invalidates the static diode-connected model, but wrongly concludes that RX becomes much higher because devices are off most of the cycle. It misses that capacitive charging sets RX and leaves it on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 2651,
        "total_tokens": 3848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 2651,
        "total_tokens": 3848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes significantly.** \n\nHere is a detailed explanation of why:\n\n### 1. Where the original formula comes from (The Metastable State)\nThe formula $R_X \\approx \\frac{1}{3} (\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}})$ assumes the ring oscillator is stuck at its **metastable DC operating point**. \n* If the circuit is perfectly balanced and not oscillating, every node sits at exactly $V_{DD}/2$ (the trip point of the inverters). \n* At this specific voltage, $V_{in} = V_{out}$ for every inverter. Because the gate and drain are at the same potential, both the NMOS and PMOS transistors are in saturation and effectively act as diode-connected devices in series. \n* In this state, there is a constant, massive short-circuit current flowing directly from VDD to GND through all three inverters, resulting in the low small-signal resistance calculated by the formula.\n\n### 2. What happens during oscillation (The Dynamic State)\nWhen the circuit is actually oscillating, it operates as a large-signal circuit, swinging rail-to-rail (from $0$ to $V_{DD}$). The concept of a single, static small-signal resistance breaks down because the operating point is constantly changing. \n\nIf we look at the effective or time-averaged resistance during oscillation, it will be **much higher** than the formula suggests, for the following reasons:\n\n* **Transistors enter Cutoff:** For the vast majority of the oscillation period, the inverters are in a settled logic state (either HIGH or LOW). \n    * When an inverter outputs HIGH, the PMOS is ON (linear region) and the NMOS is OFF (cutoff).\n    * When an inverter outputs LOW, the NMOS is ON (linear region) and the PMOS is OFF (cutoff).\n* **Blocked DC Path:** In either of these settled states, one of the transistors is completely turned off. Therefore, there is no direct DC path from VDD to ground. The resistance looking into the supply for that specific inverter is essentially infinite (limited only by tiny leakage currents).\n* **Brief Transitions:** The only time an inverter presents a low resistance to the supply is during the very brief switching transient when the node voltage crosses $V_{DD}/2$ and both transistors are momentarily ON. \n\n### Conclusion\nBecause the transistors spend most of their time with one device in cutoff (acting as an open circuit) rather than sitting in saturation, the time-averaged current drawn from the supply drops dramatically compared to the metastable state. Consequently, the effective resistance $R_X$ looking into the supply node becomes **much higher** than $\\frac{1}{3} (\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}})$.",
        "format": "markdown",
        "sha256": "0acebeb62e688e9eb7f161866afa510a392dd0ee4aeeddd6852ebedd77e7376d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that oscillation makes RX much higher because devices are off much of the cycle, contradicting the key result: supply current is set by charging and discharging node capacitances, leaving RX on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 2629,
        "total_tokens": 3826,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2024,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 2629,
        "total_tokens": 3826,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2024,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes significantly.**\n\nHere is a breakdown of why the original calculation is only valid for a specific non-oscillating state, and why it fails when the circuit oscillates:\n\n### 1. Where the original formula comes from (The Non-Oscillating State)\nThe formula $R_X \\approx \\frac{1}{3} (\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}})$ assumes the ring oscillator is stuck in its **metastable DC operating point**. \n* If the oscillator fails to start, all nodes settle at a voltage roughly equal to $V_{DD}/2$. \n* At this specific voltage, the input of each inverter equals its output ($V_{in} = V_{out}$). \n* Because the gate and drain of the transistors are at the same potential, they effectively act as **diode-connected devices** operating in saturation. \n* The small-signal resistance of one such inverter looking from the supply to ground is indeed roughly $(1/g_{mp} + 1/g_{mn})$. Since there are three in parallel, you divide by 3.\n\n### 2. Why it changes during oscillation (The Large-Signal State)\nWhen the circuit oscillates, it is no longer a small-signal system sitting at $V_{DD}/2$. It becomes a large-signal system where the node voltages swing rail-to-rail (from $0$ to $V_{DD}$).\n\n* **Transistors act as switches:** For the vast majority of the oscillation cycle, the inverters are at logic '1' or logic '0'. \n    * If the input is '1', the NMOS is fully ON (linear region) and the PMOS is fully OFF (cutoff).\n    * If the input is '0', the PMOS is fully ON (linear region) and the NMOS is fully OFF (cutoff).\n* **The path to ground is broken:** Because at least one transistor in every inverter is turned OFF (in cutoff) for most of the cycle, there is no direct DC path from the supply to ground. \n* **The \"diode-connected\" assumption fails:** Because the input and output of the inverters are swinging out of phase, $V_{in} \\neq V_{out}$. Therefore, the transistors are **not** diode-connected.\n\n### Conclusion\nDuring oscillation, the concept of a static small-signal resistance based on saturation $g_m$ becomes invalid. The resistance looking into the supply node ($R_X$) would appear **much higher** than the formula suggests, because the DC current path is blocked by OFF transistors for most of the cycle (current is only drawn dynamically to charge/discharge capacitors and during the brief moments of switching crossover).",
        "format": "markdown",
        "sha256": "bae55599b325074081c8eaf21d4380c07a7ec4cac9e40b343361346c938d8862"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that oscillation invalidates the static diode-connected model, but wrongly concludes that RX becomes much higher because devices are off most of the cycle. It misses that capacitive charging sets RX and leaves it on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 2651,
        "total_tokens": 3848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 2651,
        "total_tokens": 3848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the provided circuit (a StrongARM latch/dynamic comparator), here is what happens to the initial voltage gain as the width of M7 increases:\n\n**The initial voltage gain decreases.**\n\nHere is the step-by-step explanation of why:\n\n1.  **Role of M7:** Transistor M7 acts as the tail current source for the differential pair (M1 and M2) during the evaluation phase (when CK is high). Increasing the width of M7 increases the total tail current ($I_{tail}$) that discharges the circuit.\n2.  **Initial Integration Phase:** When CK goes high, M7 turns on and begins pulling current. Nodes P and Q start discharging from $V_{DD}$. The voltage difference that develops between P and Q ($\\Delta V_{PQ}$) depends on the input voltage difference ($\\Delta V_{in}$) and how long this initial phase lasts before the cross-coupled inverters (M3-M6) turn on to latch the signal.\n3.  **Gain vs. Time:** The initial voltage gain ($A_v$) is proportional to the transconductance ($g_m$) of the input pair (M1, M2) and the integration time ($t_{int}$):\n    $$A_v \\propto g_m \\times t_{int}$$\n4.  **Effect of Increased Current:**\n    *   **Integration Time ($t_{int}$):** A larger tail current discharges nodes P and Q faster. Therefore, the time available for integration ($t_{int}$) is *inversely* proportional to the tail current ($t_{int} \\propto 1/I_{tail}$).\n    *   **Transconductance ($g_m$):** In strong inversion, the transconductance of the input pair is proportional to the square root of the tail current ($g_m \\propto \\sqrt{I_{tail}}$).\n5.  **Conclusion:** Combining these relationships, the initial voltage gain is proportional to:\n    $$A_v \\propto \\sqrt{I_{tail}} \\times \\left(\\frac{1}{I_{tail}}\\right) = \\frac{1}{\\sqrt{I_{tail}}}$$\n    Because increasing the width of M7 increases $I_{tail}$, it results in a **decrease** in the initial voltage gain. Essentially, a wider M7 makes the circuit faster but gives it less time to build up a voltage difference before latching, thereby reducing the gain.",
        "format": "markdown",
        "sha256": "4f468342a4c0d4e9d2b38fce921b43df08807eb9d39da5f61ddc7cf709dee64a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that a wider M7 increases tail current and decreases initial gain. Its explanation that the integration time falls roughly as 1/I while input-pair gm grows only as √I is physically consistent with the gain trend.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2178,
        "output_tokens": 8284,
        "total_tokens": 10462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7246,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 4142,
        "total_tokens": 5231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3623,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the provided StrongARM latch circuit, here is what happens to the initial voltage gain as the width of M7 increases:\n\n**The initial voltage gain decreases.**\n\nHere is the step-by-step explanation of why:\n\n1.  **Role of M7:** Transistor M7 acts as the clocked tail current source. When the clock (CK) goes high, M7 turns on and dictates the total tail current ($I_{tail}$) that discharges the internal nodes (P, Q, X, and Y). Increasing the width of M7 ($W_7$) increases this tail current.\n2.  **Initial Evaluation Phase:** When CK goes high, the circuit initially acts as a differential integrator before the cross-coupled inverters (M3-M6) fully turn on and positive feedback takes over.\n    *   The **common-mode voltage** at the output nodes drops at a rate proportional to the tail current: $\\text{Rate}_{CM} \\propto I_{tail}$.\n    *   The **differential output voltage** builds up at a rate proportional to the transconductance ($g_m$) of the input pair (M1, M2): $\\text{Rate}_{Diff} \\propto g_m \\cdot \\Delta V_{in}$.\n3.  **Integration Time:** The initial amplification phase ends when the common-mode voltage drops low enough to activate the positive feedback loop. Because a larger $I_{tail}$ discharges the nodes faster, the time available for this initial integration ($t_{int}$) is inversely proportional to the tail current:\n    $$t_{int} \\propto \\frac{1}{I_{tail}}$$\n4.  **Transconductance vs. Current:** In strong inversion, the transconductance of the input transistors M1 and M2 is proportional to the square root of the tail current:\n    $$g_m \\propto \\sqrt{I_{tail}}$$\n5.  **Calculating Initial Gain:** The initial voltage gain ($A_v$) is the product of the differential rate of change and the integration time:\n    $$A_v \\propto g_m \\cdot t_{int}$$\n    Substituting the proportionalities from above:\n    $$A_v \\propto \\sqrt{I_{tail}} \\cdot \\left(\\frac{1}{I_{tail}}\\right) = \\frac{1}{\\sqrt{I_{tail}}}$$\n\n**Conclusion:**\nBecause increasing the width of M7 increases $I_{tail}$, the term $\\frac{1}{\\sqrt{I_{tail}}}$ becomes smaller. Intuitively, a wider M7 pulls the common-mode voltage down much faster, giving the differential pair less time to integrate the input signal before latching occurs, which ultimately **reduces the initial voltage gain**.",
        "format": "markdown",
        "sha256": "cffa9081b17cc7cc42e40238e5f24a94c35e27975378b603e558a3a2267ec722"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M7 increases tail current and decreases initial gain. The explanation that input-pair transconductance grows more slowly than the current, while integration time falls as current rises, is physically consistent with the golden solution.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2178,
        "output_tokens": 7817,
        "total_tokens": 9995,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6744,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 4214,
        "total_tokens": 5303,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the provided StrongARM latch (dynamic comparator) circuit, here is what happens to the initial voltage gain as the width of M7 increases:\n\n**The initial voltage gain decreases.**\n\nHere is the step-by-step explanation of why this occurs:\n\n1.  **Role of M7:** Transistor M7 acts as the tail current source (or switch) for the differential input pair (M1 and M2). When the clock (CK) goes high, M7 turns on and dictates the total discharge current ($I_{tail}$) that pulls current from nodes P and Q.\n2.  **Increasing Width ($W_7$):** Increasing the width of M7 decreases its ON-resistance and allows it to sink more current. Therefore, a wider M7 results in a **larger tail current ($I_{tail}$)**.\n3.  **Initial Amplification Phase:** When CK goes high, the circuit enters an initial \"linear\" or \"integration\" phase before the cross-coupled inverters (M3-M6) fully turn on and latch. During this brief window, the input pair (M1/M2) acts like a differential amplifier integrating the input voltage difference ($\\Delta V_{in}$) onto the parasitic capacitances at nodes P and Q.\n4.  **Gain vs. Current Trade-off:** The initial voltage gain ($A_v$) during this phase depends on two main factors:\n    *   **Transconductance ($g_m$):** The $g_m$ of the input pair M1/M2 is proportional to the square root of the tail current ($g_m \\propto \\sqrt{I_{tail}}$).\n    *   **Integration Time ($\\Delta t$):** The time available for this initial amplification is determined by how fast nodes P and Q discharge to the point where the latching transistors turn on. A larger tail current discharges these nodes much faster, meaning the integration time is inversely proportional to the tail current ($\\Delta t \\propto 1/I_{tail}$).\n5.  **Combining the Factors:** The initial voltage gain is roughly the product of the transconductance and the integration time:\n    $$Gain \\approx g_m \\times \\Delta t \\propto \\sqrt{I_{tail}} \\times \\frac{1}{I_{tail}} = \\frac{1}{\\sqrt{I_{tail}}}$$\n\n**Conclusion:**\nBecause the integration time decreases faster ($1/I_{tail}$) than the transconductance increases ($\\sqrt{I_{tail}}$), an increase in the tail current leads to a net reduction in gain. Therefore, **increasing the width of M7 makes the comparator faster but reduces its initial voltage gain.**",
        "format": "markdown",
        "sha256": "1308f8e8df0bcc3404dcdfd45c0867daa1b81611de9232fafd8caa4f4d9c91d3"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening M7 increases tail current and decreases initial gain. The explanation captures the tradeoff between input-pair transconductance and integration time, consistent with the golden solution.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2178,
        "output_tokens": 8516,
        "total_tokens": 10694,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7382,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 4097,
        "total_tokens": 5186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3531,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the provided circuit (a StrongARM latch/dynamic comparator), here is what happens to the initial voltage gain if you increase the capacitance at nodes P and Q:\n\n**The initial voltage gain decreases.**\n\nHere is the step-by-step reasoning:\n\n1.  **Circuit Operation:** During the evaluation phase (when $CK$ goes high), the input transistors $M_1$ and $M_2$ convert the input voltage difference ($V_{in1} - V_{in2}$) into a differential current.\n2.  **Integration at Nodes P and Q:** This differential current begins to discharge the parasitic capacitances at nodes P and Q. The voltage difference developed at these nodes acts as the initial pre-amplification before the cross-coupled inverters ($M_3$-$M_6$) turn on and start the positive feedback (regeneration) phase.\n3.  **Capacitance Effect:** The rate at which the voltage changes at nodes P and Q is inversely proportional to their capacitance ($dV/dt = I/C$).\n    *   If you **increase the capacitance** at nodes P and Q, it takes more charge (and thus more time) to create the same voltage drop.\n    *   Consequently, for a given differential input current, a larger capacitance will result in a **smaller differential voltage** being developed over the same initial time period.\n4.  **Signal Transfer:** A larger capacitance at P and Q effectively \"absorbs\" more of the differential signal current, leaving less to quickly drive the sources of $M_3$ and $M_4$. This slows down the transfer of the signal to the output nodes X and Y, reducing the effective initial voltage gain before the latching action takes over.",
        "format": "markdown",
        "sha256": "0b5b40f85919d8eb6aa65a8e37ca5993e13ba87461fb97c54abb05800b6d3510"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance slows the node-voltage transient, but it incorrectly concludes that the initial gain decreases. It misses that the longer amplification interval compensates for the slower voltage change, leaving the initial gain approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 10949,
        "total_tokens": 13125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 6608,
        "total_tokens": 7696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6244,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the operation of the StrongARM latch (dynamic comparator) shown in the figure, here is what happens to the initial voltage gain if the capacitance at nodes P and Q is increased:\n\n**The initial voltage gain decreases.**\n\nHere is the step-by-step reasoning:\n\n1.  **Integration Phase:** When the clock (CK) goes high, the tail transistor $M_7$ turns on, and the input differential pair ($M_1$ and $M_2$) begins to draw current. This current discharges nodes P and Q from their precharged state ($V_{DD}$).\n2.  **Voltage Development:** The rate at which the voltage drops at nodes P and Q is inversely proportional to their capacitance. The differential voltage developed between these two nodes ($\\Delta V_{PQ}$) over a small time $t$ can be approximated by:\n    $$\\Delta V_{PQ} \\approx \\frac{g_m \\cdot \\Delta V_{in}}{C_{P,Q}} \\cdot t$$\n    where $g_m$ is the transconductance of the input pair, $\\Delta V_{in}$ is the input voltage difference, and $C_{P,Q}$ is the capacitance at nodes P and Q.\n3.  **Effect of Increased Capacitance:** The initial voltage gain is essentially the ratio $\\frac{\\Delta V_{PQ}}{\\Delta V_{in}}$. As seen in the formula, this gain is inversely proportional to the capacitance $C_{P,Q}$. If you increase the capacitance at nodes P and Q, it takes more charge (and thus more time) to develop the same voltage difference.\n4.  **Conclusion:** Because a larger capacitance slows down the rate at which the differential voltage separates, the initial voltage gain (the voltage difference developed before the cross-coupled inverters fully turn on and start regeneration) will **decrease**.",
        "format": "markdown",
        "sha256": "10a62dd7a404f7f7a1ac9234aa687d550996929cb414fae6f902e23a919466d6"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite to the essential result: larger capacitance slows differential development but proportionally lengthens the amplification phase, so the initial gain remains approximately unchanged. The answer identifies the slower voltage slope but misses this cancellation.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 25362,
        "total_tokens": 27538,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24478,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 7180,
        "total_tokens": 8268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6793,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the operation of the dynamic comparator (StrongARM latch) shown in the figure, here is what happens to the initial voltage gain if you increase the capacitance at nodes P and Q:\n\n**The initial voltage gain decreases.**\n\nHere is the step-by-step reasoning:\n\n1.  **Integration Phase:** When the clock signal ($CK$) goes high, the tail transistor $M_7$ turns on, and the precharge transistors ($S_1$-$S_4$) turn off. The input differential pair ($M_1$ and $M_2$) begins to draw current proportional to the input voltages $V_{in1}$ and $V_{in2}$.\n2.  **Role of Nodes P and Q:** Nodes P and Q act as integration nodes. The currents from $M_1$ and $M_2$ discharge the parasitic capacitances at these nodes ($C_P$ and $C_Q$).\n3.  **Voltage Difference:** The differential voltage that builds up between nodes P and Q over time ($t$) can be approximated by the equation:\n    $$\\Delta V_{PQ}(t) \\approx \\frac{g_m \\cdot \\Delta V_{in}}{C_{P,Q}} \\cdot t$$\n    *(where $g_m$ is the transconductance of the input pair and $\\Delta V_{in}$ is the input voltage difference).*\n4.  **Effect of Increased Capacitance:** As seen in the equation, the rate at which the voltage difference $\\Delta V_{PQ}$ grows is **inversely proportional** to the capacitance $C_{P,Q}$. If you increase the capacitance at nodes P and Q, the nodes will discharge more slowly.\n5.  **Conclusion:** Because the voltage difference builds up at a slower rate, the pre-amplification (initial voltage gain) achieved before the cross-coupled latch transistors ($M_3$-$M_6$) turn on and force regeneration is **reduced**.",
        "format": "markdown",
        "sha256": "65270769878914093c0bea006b67a10ef51d990fcb7a860a111c12ba90d75484"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance reduces the differential-voltage growth rate, but it incorrectly concludes that the initial gain decreases. The longer amplification interval compensates for the slower growth, leaving the initial gain approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 26177,
        "total_tokens": 28353,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25370,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 19401,
        "total_tokens": 20489,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18990,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided (a StrongARM latch/comparator), increasing the widths of transistors **M5** and **M6** will generally **degrade** the speed of the circuit.\n\nHere is the step-by-step reasoning:\n\n1.  **Circuit Operation Phases:** When the clock (CK) goes high, the circuit enters the evaluation phase. Initially, nodes X and Y are precharged to $V_{DD}$. The input pair (M1, M2) and the cross-coupled NMOS pair (M3, M4) start discharging nodes X and Y towards ground.\n2.  **Role of M5 and M6:** M5 and M6 are the cross-coupled PMOS transistors. They do not turn on until the voltage at node X or Y drops below $V_{DD} - |V_{thp}|$ (the threshold voltage of the PMOS).\n3.  **Parasitic Capacitance:** Before M5 and M6 turn on, they act purely as capacitive loads on the critical output nodes X and Y. Increasing their width directly increases their gate capacitance ($C_{gg}$) and drain-to-bulk capacitance ($C_{db}$), which adds to the total capacitance at nodes X and Y.\n4.  **Impact on Speed:**\n    *   **Slower Initial Discharge:** Because the capacitance at nodes X and Y is larger, it takes longer for the NMOS transistors (M1-M4) to discharge these nodes.\n    *   **Delayed Regeneration:** The positive feedback (regeneration) phase, which rapidly drives the outputs to full logic levels, cannot start until the PMOS transistors turn on. Since the initial discharge is slower, the time it takes to reach the turn-on threshold of M5 and M6 increases.\n\nWhile larger PMOS transistors might slightly increase the strength of the pull-up once they are fully on, the penalty of the added capacitance during the critical initial discharge phase dominates, leading to an overall **increase in delay (degraded speed)**. Therefore, in optimized designs, M5 and M6 are typically kept as small as possible while still ensuring reliable latching and overcoming leakage.",
        "format": "markdown",
        "sha256": "74fea162b76f527cc9614acbec35cea32de8ed5feab60261d1a0b5604c2c4c36"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the correct initial trend: wider M5/M6 strengthen regeneration enough to improve speed initially, with added capacitance limiting the benefit only at larger widths. It identifies that capacitance can hurt speed and briefly notes increased pull-up strength, but wrongly treats the capacitance penalty as dominant.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 6378,
        "total_tokens": 8554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5357,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 2708,
        "total_tokens": 3796,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2257,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the provided StrongARM latch comparator circuit, if you increase the widths of M5 and M6, the speed will **degrade**.\n\nHere is the step-by-step reasoning:\n\n1.  **Circuit Operation:** During the precharge phase (CK is low), nodes X and Y are precharged to $V_{DD}$. When the evaluation phase begins (CK goes high), nodes X and Y start to discharge towards ground.\n2.  **Initial State of M5/M6:** Because nodes X and Y are initially at $V_{DD}$, the cross-coupled PMOS transistors M5 and M6 are initially **OFF** (their gate-to-source voltage is 0V). They only turn on later in the evaluation phase when the voltage at node X or Y drops below $V_{DD} - |V_{thp}|$.\n3.  **Capacitive Loading:** Increasing the width of M5 and M6 increases their parasitic capacitances (specifically the gate and drain capacitances connected to nodes X and Y).\n4.  **Impact on Speed:**\n    *   During the critical initial discharge phase, M5 and M6 are OFF and contribute no useful transconductance ($g_m$) to the positive feedback. They act purely as a **capacitive load**.\n    *   This added capacitance means the input pair (M1/M2) and the NMOS cross-coupled pair (M3/M4) must discharge a larger load, which slows down the rate at which nodes X and Y drop.\n    *   Consequently, it takes longer for the circuit to reach the point where strong positive feedback kicks in, increasing the overall delay (degrading the speed).\n\nWhile wider PMOS transistors will eventually pull the \"high\" node back to $V_{DD}$ more strongly once they turn on, this happens late in the process. The penalty of the added capacitance during the crucial early evaluation phase dominates, leading to a slower overall comparator.",
        "format": "markdown",
        "sha256": "9b2704089836d9327d4a9e1f0c27e382138f95a50dd6f31f9df0911e863874ec"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer identifies the real capacitance penalty and notes that wider PMOS devices strengthen pull-up later, but incorrectly concludes that the added load dominates. The golden solution says stronger regeneration wins initially, so speed improves up to an optimum.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 5666,
        "total_tokens": 7842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4905,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 3340,
        "total_tokens": 4428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2925,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, increasing the widths of transistors M5 and M6 will **degrade** the speed of the comparator.\n\nHere is the step-by-step reasoning:\n\n1.  **Circuit Identification:** The circuit shown is a StrongARM latch, widely used as a dynamic comparator.\n2.  **Role of M5 and M6:** Transistors M5 and M6 form a cross-coupled PMOS pair. Their primary function is to provide positive feedback to pull the \"winning\" output node fully to $V_{DD}$ and latch the final state.\n3.  **Evaluation Phase Dynamics:**\n    *   When the clock ($CK$) goes high, the precharge transistors (S1-S4) turn off, and the tail current source (M7) turns on.\n    *   The input pair (M1, M2) begins to discharge nodes P and Q.\n    *   As P and Q drop, the cross-coupled NMOS pair (M3, M4) turns on and begins to discharge the output nodes X and Y.\n    *   **Crucially, during this initial discharge phase, M5 and M6 are OFF.** They will not turn on until the voltage at node X or Y drops below $V_{DD} - |V_{th,p}|$ (the threshold voltage of the PMOS).\n4.  **Effect of Increasing Width:**\n    *   Increasing the width of M5 and M6 directly increases their parasitic capacitances (specifically, the gate-to-source $C_{gs}$, gate-to-drain $C_{gd}$, and drain-to-bulk $C_{db}$ capacitances).\n    *   These capacitances add directly to the total capacitive load at the critical output nodes X and Y.\n    *   Because M5 and M6 are OFF during the initial evaluation, they provide no extra drive current ($g_m$) to help resolve the signal; they act purely as a capacitive burden.\n    *   This added capacitance means M3 and M4 must work harder and take longer to discharge nodes X and Y to the point where the positive feedback loop can fully engage.\n\nTherefore, the increased capacitive loading at nodes X and Y slows down the initial voltage drop, leading to an overall **degradation in speed** (increased delay).",
        "format": "markdown",
        "sha256": "a0227e7ab5220391744d7903ddcbb78744bd5db50611ee400fd6c66c5a755702"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the key result: widening M5/M6 initially speeds regeneration, because their added drive outweighs their added capacitance. It identifies a real limiting effect and the cross-coupled PMOS role, but incorrectly treats capacitance as dominant from the start.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2176,
        "output_tokens": 6947,
        "total_tokens": 9123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5890,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 3277,
        "total_tokens": 4365,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2790,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, increasing the widths of the clocked transistors will **degrade** the speed of the circuit.\n\nHere is the step-by-step explanation of why:\n\n1.  **Identify the Circuit and Transistors:**\n    *   The circuit is a dynamic master-slave flip-flop (or a divide-by-2 counter given the feedback).\n    *   The \"clocked transistors\" are the inner transistors in the first two stages whose gates are connected to $CK$ and $\\overline{CK}$.\n    *   The \"input transistors\" are the outer transistors (like $M_1$ and the top PMOS) whose gates are connected to the data signals ($Z$ and $X$).\n\n2.  **The Resistance Bottleneck:**\n    *   To change the state of node $X$ or $Y$, current must flow through a series stack of two transistors (one input transistor and one clocked transistor).\n    *   The total resistance of this path is roughly $R_{total} = R_{input} + R_{clocked}$.\n    *   If you increase the width of *only* the clocked transistors, their resistance ($R_{clocked}$) decreases. However, the total resistance is still bottlenecked by the fixed resistance of the input transistors ($R_{input}$). The improvement in drive strength quickly saturates.\n\n3.  **The Capacitance Penalty (Self-Loading):**\n    *   The speed (delay) is determined by the $RC$ time constant: $\\text{Delay} \\approx R_{total} \\times C_{load}$.\n    *   The clocked transistors are connected directly to the output nodes ($X$ and $Y$).\n    *   Increasing the width of a transistor linearly increases its parasitic drain capacitance. Therefore, widening the clocked transistors directly adds significant capacitance to nodes $X$ and $Y$.\n\n**Conclusion:**\nWhile widening the clocked transistors provides a marginal, saturating decrease in path resistance, it causes a continuous, linear increase in the load capacitance at the output nodes. The added capacitance outweighs the slight improvement in drive strength, resulting in a larger $RC$ time constant and **degraded (slower) speed**.\n\n*(Additionally, wider clocked transistors present a larger capacitive load to the clock signals ($CK$, $\\overline{CK}$), which can slow down the clock edges and further degrade overall performance.)*",
        "format": "markdown",
        "sha256": "8817b69ffffb1221f80a40d2cb459139a72434453bea5d18d3cca93af9059fc5"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the resistance reduction and added node capacitance, but concludes that widening degrades speed. The expected trend is initial improvement from lower on-resistance, with added capacitance limiting or eventually reversing the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 11158,
        "total_tokens": 13352,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10253,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 5938,
        "total_tokens": 7035,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5439,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the provided CMOS circuit, the speed will **degrade** if you increase the widths of the clocked transistors.\n\nHere is the step-by-step technical reasoning:\n\n1.  **Identify Transistor Placement:** Look closely at the first stage (the clocked inverter driving node $X$). The transistors driven by the data signal ($Z$) are on the *outside* (connected to $V_{DD}$ and Ground). The transistors driven by the clock signals ($CK$ and $\\overline{CK}$) are on the *inside*, meaning their drains are directly connected to the output node $X$. The same is true for the second stage driving node $Y$.\n2.  **Analyze the Delay (RC Time Constant):** The speed of this circuit is determined by how fast nodes $X$ and $Y$ can be charged and discharged. This delay is roughly proportional to the equivalent resistance ($R_{eq}$) of the pull-up/pull-down path multiplied by the capacitance at the output node ($C_{out}$).\n    *   **Resistance ($R_{eq}$):** The total resistance is the sum of the data transistor's resistance and the clocked transistor's resistance ($R_{data} + R_{clocked}$).\n    *   **Capacitance ($C_{out}$):** The capacitance at node $X$ consists of the load from the next stage PLUS the parasitic drain capacitance of the two inner (clocked) transistors connected to it.\n3.  **The Trade-off of Increasing Width:**\n    *   **The Benefit:** Increasing the width of the clocked transistors decreases their ON-resistance ($R_{clocked}$).\n    *   **The Penalty:** Increasing their width also proportionally *increases* their parasitic drain capacitance, which directly adds to $C_{out}$ at the critical nodes $X$ and $Y$ (this is known as self-loading).\n4.  **The Bottleneck Effect:** Because the clocked transistor is in series with the data transistor, the total resistance ($R_{eq}$) can never be lower than $R_{data}$. Even if you make the clocked transistor infinitely wide (making $R_{clocked}$ near zero), the path is still bottlenecked by the resistance of the data transistor.\n5.  **Conclusion:** While the reduction in resistance has diminishing returns due to the series bottleneck, the increase in parasitic capacitance at the output node grows linearly. Therefore, the added capacitance quickly outweighs the marginal improvement in resistance, causing the RC time constant to increase and the overall speed of the circuit to **degrade**.",
        "format": "markdown",
        "sha256": "8dfb666fc936856bfee774eef455952c5f1a69531551c4bb344bdaead17fe29d"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the series resistance and added node capacitance, but concludes that widening the clocked transistors degrades speed. The expected trend is that speed improves initially, with added capacitance limiting or reversing the benefit only beyond an optimum.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 18287,
        "total_tokens": 20481,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17347,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 13067,
        "total_tokens": 14164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12533,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, increasing the widths of the clocked transistors will **degrade** the speed.\n\nHere is the step-by-step reasoning:\n\n1.  **Identify the Transistor Positions:** In the first two stages (the clocked inverters), the clocked transistors (those with gates connected to $CK$ or $\\overline{CK}$) are the **inner** transistors. Their drains are connected directly to the output nodes ($X$ and $Y$). The input transistors (driven by $Z$ or $X$) are the **outer** transistors, connected to $V_{DD}$ and Ground.\n2.  **Effect on Resistance (Drive Strength):** Increasing the width ($W$) of a transistor decreases its ON-resistance. However, because the clocked transistors are in series with the input transistors, the total resistance of the pull-up or pull-down path is the sum of both ($R_{total} = R_{input} + R_{clocked}$). Even if you make the clocked transistors infinitely wide ($R_{clocked} \\approx 0$), the maximum current is still bottlenecked by the fixed resistance of the input transistors ($R_{input}$).\n3.  **Effect on Capacitance (Load):** Increasing the width of a transistor increases its parasitic capacitances (gate, source, and drain). Because the clocked transistors are connected directly to the output nodes ($X$ and $Y$), increasing their width directly increases the drain capacitance on these critical nodes.\n4.  **Conclusion (RC Delay):** The speed of the circuit is determined by the RC delay at nodes $X$ and $Y$. While increasing the width of the clocked transistors slightly reduces the total resistance (which has a diminishing return due to the series input transistor), it linearly increases the load capacitance on the output node. The increase in parasitic capacitance outweighs the marginal gain in drive current, leading to a larger RC time constant and thereby **degrading** the overall speed of the circuit.",
        "format": "markdown",
        "sha256": "c914d83bc60c58633fe57b579b7ed2bfe1cd5658887d1427a1d0f7c2c0e81593"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer correctly recognizes that the clocked devices are in series with the data-driven devices and add capacitance at X and Y, but it concludes that widening them degrades speed. The golden solution says their reduced on-resistance improves speed initially; added capacitance limits or can reverse the benefit only at larger widths.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 10856,
        "total_tokens": 13050,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10032,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 5220,
        "total_tokens": 6317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on an analysis of the circuit, **yes**, this structure provides quadrature outputs.\n\nHere is a step-by-step breakdown of why:\n\n1.  **Circuit Identification**: The circuit is a dynamic master-slave D-type flip-flop configured as a **divide-by-2 frequency divider**.\n    *   **First Stage (Master)**: The left clocked inverter is transparent when $CK = 1$ (since the PMOS is clocked by $\\overline{CK}$ and the NMOS by $CK$). When transparent, $X = \\overline{Z}$.\n    *   **Second Stage (Slave)**: The middle clocked inverter is transparent when $CK = 0$ (PMOS clocked by $CK$, NMOS by $\\overline{CK}$). When transparent, $Y = \\overline{X}$.\n    *   **Feedback**: The third stage is a standard inverter, making $Z = \\overline{Y}$. This inverted feedback ($Z$ feeding back to the input) creates the toggle action necessary for frequency division.\n\n2.  **Signal Tracing**: Let's trace the logic states through a few clock cycles to see the relationship between nodes $X$ and $Y$.\n    *   **Assume an initial state**: $CK = 0$, $Y = 0$.\n        *   Because $Y = 0$, $Z = 1$.\n        *   Because $CK = 0$, the second stage is transparent, so $Y = \\overline{X} \\rightarrow X = 1$.\n        *   *(State: X=1, Y=0)*\n    *   **Clock goes High ($CK = 1$)**:\n        *   Second stage holds its value ($Y$ stays $0$, $Z$ stays $1$).\n        *   First stage becomes transparent: $X = \\overline{Z} \\rightarrow X = 0$.\n        *   *(State: X=0, Y=0)*\n    *   **Clock goes Low ($CK = 0$)**:\n        *   First stage holds its value ($X$ stays $0$).\n        *   Second stage becomes transparent: $Y = \\overline{X} \\rightarrow Y = 1$. (This makes $Z = 0$).\n        *   *(State: X=0, Y=1)*\n    *   **Clock goes High ($CK = 1$)**:\n        *   Second stage holds ($Y$ stays $1$, $Z$ stays $0$).\n        *   First stage becomes transparent: $X = \\overline{Z} \\rightarrow X = 1$.\n        *   *(State: X=1, Y=1)*\n    *   **Clock goes Low ($CK = 0$)**:\n        *   First stage holds ($X$ stays $1$).\n        *   Second stage becomes transparent: $Y = \\overline{X} \\rightarrow Y = 0$. (Back to initial state).\n        *   *(State: X=1, Y=0)*\n\n3.  **Quadrature Relationship**:\n    *   If you look at the sequences, both $X$ and $Y$ are square waves that complete one full cycle every **two** clock cycles (frequency is $f_{CK}/2$).\n    *   $X$ transitions on the rising edge of $CK$, while $Y$ transitions on the falling edge of $CK$.\n    *   This means $Y$ is delayed (or advanced) relative to $X$ by exactly half a clock cycle ($T_{CK}/2$).\n    *   Since the total period of the output signals is $2T_{CK}$, a shift of $T_{CK}/2$ represents exactly **one-quarter of the output period**, which corresponds to a **90° phase shift**.\n\nTherefore, the signals at nodes **$X$** and **$Y$** (as well as $Z$) are in quadrature.",
        "format": "markdown",
        "sha256": "473d54d89276c29b536a891a8f8a76118f1811e2177ca2e394bc00fb8addf8f0"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the divide-by-two and the nominal 90° relationship from transitions on opposite clock edges. However, it presents the quadrature as exact and omits both nonidealities: Inv3 delay skewing Z and unequal loading causing latch-delay mismatch.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2166,
        "output_tokens": 12235,
        "total_tokens": 14401,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 7145,
        "total_tokens": 8228,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6309,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, **yes**, the structure provides quadrature outputs.\n\nHere is a step-by-step breakdown of why:\n\n1.  **Circuit Identification**: The circuit is a dynamic **divide-by-2 frequency divider** (or a toggle flip-flop). It consists of two cascaded clocked inverters (acting as master and slave latches) and a standard inverter in a feedback loop.\n    *   **First Stage (Master Latch)**: The left clocked inverter takes $Z$ as input and outputs to $X$. It is transparent when $CK = 1$ (and $\\overline{CK} = 0$), meaning $X = \\overline{Z}$. When $CK = 0$, it holds its value.\n    *   **Second Stage (Slave Latch)**: The middle clocked inverter takes $X$ as input and outputs to $Y$. It is transparent when $CK = 0$ (and $\\overline{CK} = 1$), meaning $Y = \\overline{X}$. When $CK = 1$, it holds its value.\n    *   **Third Stage**: A standard inverter that makes $Z = \\overline{Y}$.\n\n2.  **Timing Analysis**:\n    *   Let's assume the clock ($CK$) has a period $T$ and a 50% duty cycle.\n    *   On the **rising edge** of $CK$, the first stage becomes transparent. Node **$X$** updates its state based on the current value of $Z$.\n    *   On the **falling edge** of $CK$ (which occurs at $T/2$), the second stage becomes transparent. Node $Y$ updates, which immediately causes node **$Z$** to update its state.\n    *   Because of the inverted feedback ($Z = \\overline{Y} = \\overline{\\overline{X}} = X$ during the transparent phase of the second stage), the circuit toggles its state every full clock cycle, meaning the output signals ($X, Y, Z$) have a period of **$2T$** (half the frequency of the clock).\n\n3.  **Phase Relationship**:\n    *   Node $X$ transitions on the rising edges of the clock.\n    *   Node $Z$ transitions on the falling edges of the clock.\n    *   The time delay between a rising edge and a falling edge is $T/2$.\n    *   To find the phase difference, we compare this time delay to the period of the output signals ($2T$):\n        $$\\text{Phase Shift} = \\left( \\frac{\\text{Time Delay}}{\\text{Output Period}} \\right) \\times 360^\\circ = \\left( \\frac{T/2}{2T} \\right) \\times 360^\\circ = \\frac{1}{4} \\times 360^\\circ = \\mathbf{90^\\circ}$$\n\nBecause nodes **$X$** and **$Z$** (as well as $X$ and $Y$) operate at the same frequency but are separated by a $90^\\circ$ phase shift, they provide **quadrature outputs** (often referred to as I and Q signals in RF/mixed-signal design).",
        "format": "markdown",
        "sha256": "51a876c00021d2bc5f25b4d1089c01bd8027dfedab36659cdbdb7fac5168daaf"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the divide-by-two and ideal 90° phase relationship, but omits the inverter delay and unequal latch loading that make the quadrature only nominal, not exact.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2166,
        "output_tokens": 11322,
        "total_tokens": 13488,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10057,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 5912,
        "total_tokens": 6995,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5217,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit diagram, the answer is **Yes**, the structure provides quadrature outputs.\n\nHere is a step-by-step breakdown of why:\n\n1.  **Circuit Identification**: The circuit is a dynamic master-slave D-flip-flop configured as a frequency divider (divide-by-2).\n    *   **Master Stage (Left)**: This is a clocked inverter that is transparent when $CK = 1$ (and $\\overline{CK} = 0$). It samples the input $Z$ and outputs it to node $X$.\n    *   **Slave Stage (Right)**: This is another clocked inverter that is transparent when $CK = 0$ (and $\\overline{CK} = 1$). It samples node $X$ and outputs it to node $Y$.\n    *   **Feedback**: The inverter $Inv_3$ takes the output $Y$, inverts it to $Z$, and feeds it back to the input of the master stage. This negative feedback causes the circuit to toggle its state every full clock cycle, dividing the clock frequency by 2.\n\n2.  **Timing and Phase Analysis**:\n    *   Because the master stage is transparent when $CK$ is high, node **$X$ updates on the rising edge** of the clock.\n    *   Because the slave stage is transparent when $CK$ is low, node **$Y$ updates on the falling edge** of the clock.\n    *   Assuming the input clock ($CK$) has a 50% duty cycle, the time delay between a rising edge and the next falling edge is exactly half a clock period ($T_{CK} / 2$).\n    *   Since this is a divide-by-2 circuit, the period of the output signals at $X$ and $Y$ is twice the clock period ($2 \\cdot T_{CK}$).\n\n3.  **Quadrature Calculation**:\n    *   Quadrature signals are 90 degrees out of phase.\n    *   The phase difference between $X$ and $Y$ can be calculated by taking their time delay and dividing it by their total period:\n        $$\\text{Phase Shift} = \\left( \\frac{\\text{Time Delay}}{\\text{Output Period}} \\right) \\times 360^\\circ$$\n        $$\\text{Phase Shift} = \\left( \\frac{T_{CK} / 2}{2 \\cdot T_{CK}} \\right) \\times 360^\\circ = \\frac{1}{4} \\times 360^\\circ = 90^\\circ$$\n\nBecause nodes $X$ and $Y$ transition half a clock cycle apart, and their total cycle is two clock cycles long, they are exactly **90 degrees out of phase**, which defines them as quadrature outputs. (Node $Z$ is also in quadrature with $X$, as it is simply the inverse of $Y$).",
        "format": "markdown",
        "sha256": "12002adc6aa9099f185f598e952bdc14918e6081a0499e6ad04a1e47eba4363c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the ideal divide-by-two timing and nominal 90° relationship, but claims exact quadrature and omits both nonidealities: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2166,
        "output_tokens": 12671,
        "total_tokens": 14837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11423,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 6470,
        "total_tokens": 7553,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5850,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, increasing the widths of the clocked transistors will **improve** the speed of the circuit.\n\nHere is the step-by-step reasoning:\n\n1.  **Transistor Placement:** In the clocked inverters shown, the clocked transistors (those with $CK$ or $\\overline{CK}$ at their gates) are placed on the \"outside\" of the stack. This means they are connected directly to the power rails ($V_{DD}$ and Ground). The transistors driven by the data signal are on the \"inside,\" connected directly to the output node.\n2.  **Decreased Resistance:** The speed (propagation delay) of these stages depends on how quickly they can charge or discharge the capacitance at their output node. This speed is dictated by the total equivalent resistance of the pull-up or pull-down transistor stack. Increasing the width ($W$) of a transistor decreases its ON-resistance ($R \\propto 1/W$). Therefore, making the clocked transistors wider reduces the overall resistance of the path, allowing more current to flow and improving drive strength.\n3.  **Minimal Capacitance Penalty:** While increasing a transistor's width also increases its parasitic capacitance, the specific placement of these transistors mitigates the negative impact. Because the clocked transistors are on the outside, their increased drain capacitance only adds to the *internal* node of the stack (between the two transistors). It does **not** add to the heavily loaded output node, which is shielded by the inner data transistors.\n\n**Conclusion:**\nWidening the clocked transistors reduces the resistance of the charging/discharging path without significantly increasing the capacitance on the critical output node. This results in a smaller RC time constant, thereby **improving** the overall speed of the circuit.",
        "format": "markdown",
        "sha256": "d10ce648f4b2f242a4ce51d4a3fbd8569cb685eb2e3a6b8c247f5d810c9a2aee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed because it lowers series resistance while adding little output loading. It omits charge sharing as a limitation, so it does not meet the full-credit rule.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 4754,
        "total_tokens": 5858,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4393,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 4754,
        "total_tokens": 5858,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4393,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, here is the step-by-step explanation:\n\n1.  **Identify the Circuit Structure:** The circuit consists of two clocked inverters (forming a dynamic master-slave flip-flop or latch) and a standard static inverter in a feedback loop.\n2.  **Locate the Clocked Transistors:** Observe the schematic carefully. The transistors gated by the clock signals ($CK$ and $\\overline{CK}$) are located on the \"outside\" of the transistor stacks—meaning they are connected directly to the power supply ($V_{DD}$) and ground, rather than being directly connected to the output nodes of those branches.\n3.  **Analyze the Effect of Increasing Width ($W$):**\n    *   **Resistance Decreases:** Increasing the width of a MOSFET decreases its ON-resistance ($R_{on}$). In these series stacks, the total resistance to charge or discharge the output node is the sum of the resistance of the clocked transistor and the input-gated transistor. Lowering the resistance of the clocked transistors increases the drive current, which tends to **improve (increase) speed**.\n    *   **Capacitance Location:** While increasing the width also increases the transistor's parasitic capacitance, we must look at *where* this capacitance is added. Because the clocked transistors are on the outside of the stack, their increased drain capacitance only adds to the *internal* node between the two series transistors. It does **not** add capacitance to the output node of that branch.\n4.  **Conclusion:** The speed of a logic gate is largely determined by how fast it can charge/discharge its output load capacitance. Since increasing the width of these specific outer transistors significantly lowers the path resistance without increasing the capacitance on the critical output node, the overall RC delay decreases.\n\nTherefore, the speed **improves**.",
        "format": "markdown",
        "sha256": "361310ac82253f2a6c25c5e100bfee4ecd26eede526da2412eb0cdf6e20559a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that speed improves because wider clocked transistors reduce series resistance and add little output loading. It omits charge sharing, which degrades swing and limits the benefit, so it does not earn full credit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 5205,
        "total_tokens": 6309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4824,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 5205,
        "total_tokens": 6309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4824,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the provided CMOS circuit, the speed will **improve**.\n\nHere is a step-by-step explanation of why:\n\n1.  **Circuit Topology:** The circuit consists of two clocked inverters (forming a master-slave latch/flip-flop) and a standard inverter in a feedback loop.\n2.  **Position of Clocked Transistors:** Look closely at the stacks of four transistors. The transistors controlled by the clock signals ($CK$ and $\\overline{CK}$) are positioned on the **outside** of the stack—meaning they are connected directly to the power rails ($V_{DD}$ and Ground). The transistors controlled by the data signal are on the **inside**, connected directly to the output node.\n3.  **RC Delay Analysis:** The speed (propagation delay) of these stages depends on how quickly the output node can be charged or discharged. This is determined by the RC time constant:\n    *   **Resistance (R):** The total resistance is the sum of the ON-resistances of the two transistors in series (e.g., $R_{clocked\\_NMOS} + R_{data\\_NMOS}$).\n    *   **Capacitance (C):** The primary capacitance that needs to be charged/discharged is at the output node.\n4.  **Effect of Increasing Width:**\n    *   **Lower Resistance:** The ON-resistance of a transistor is inversely proportional to its width ($R \\propto 1/W$). By increasing the width of the clocked transistors, you significantly decrease their resistance, which lowers the total resistance of the entire pull-up or pull-down path.\n    *   **Capacitance Impact:** While wider transistors have higher parasitic capacitance, because these clocked transistors are on the *outside*, their increased capacitance primarily affects the internal node between the two series transistors, **not** the critical output node.\n5.  **Conclusion:** Because the path resistance is reduced without adding significant capacitance to the critical output node, the circuit can charge and discharge its outputs faster. Therefore, the overall propagation delay decreases, and the **speed improves**.",
        "format": "markdown",
        "sha256": "ecd296b2d10966f58f4b84309d0582c5030ff25ba41e27b81b1ed852b4b32bca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that speed improves because widening the clocked transistors lowers series resistance while adding little output loading. It omits charge sharing, which degrades the swing and limits the benefit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 7147,
        "total_tokens": 8251,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6708,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 7147,
        "total_tokens": 8251,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6708,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit arrangement:\n\n### 1. Component Identification\nThe circuit consists of the following basic digital logic components:\n*   **Three Inverters (NOT gates):** Represented by the triangles with small circles at their outputs. The first one is labeled **Inv₁**. Let's refer to the other two as Inv₂ and Inv₃.\n*   **Two Switches (Transmission Gates):** Represented by the switch symbols.\n    *   The first switch is controlled by the clock signal **$CK$**.\n    *   The second switch is controlled by the inverted clock signal **$\\overline{CK}$** (CK-bar).\n*   **Feedback Loop:** The output of the final inverter (Inv₃) is routed back to the input of the first switch, creating a closed loop.\n\n### 2. Circuit Topology & Logic\n*   **Complementary Clocks:** The signals $CK$ and $\\overline{CK}$ mean that when one switch is closed (conducting), the other is open (non-conducting). They operate in two distinct phases.\n*   **Dynamic Storage:** When a switch opens, the logic level is temporarily held by the parasitic capacitance at the input of the subsequent inverter. This makes it a **dynamic** logic circuit.\n*   **Buffer Stage:** Notice that Inv₂ and Inv₃ are connected in series without any switches between them. Two inverters in series act as a non-inverting buffer. Whatever logic level enters Inv₂ will exit Inv₃ unchanged (e.g., an input of 1 becomes 0 after Inv₂, and back to 1 after Inv₃).\n\n### 3. Operational Analysis (Step-by-Step)\nLet's trace a signal through one full clock cycle to see how the circuit behaves. Let's assume the current state at the output of Inv₃ is **Logic 1**.\n\n**Phase 1: $CK = 1$ (High), $\\overline{CK} = 0$ (Low)**\n*   The first switch ($CK$) **closes**. The Logic 1 from the feedback loop passes to the input of Inv₁.\n*   Inv₁ inverts this to a **Logic 0**.\n*   The second switch ($\\overline{CK}$) is **open**. The Logic 0 is trapped at the output of Inv₁. The rest of the circuit (Inv₂ and Inv₃) holds its previous state dynamically.\n\n**Phase 2: $CK = 0$ (Low), $\\overline{CK} = 1$ (High)**\n*   The first switch ($CK$) **opens**, isolating Inv₁ from the feedback loop. Inv₁ dynamically holds the Logic 1 at its input, keeping its output at Logic 0.\n*   The second switch ($\\overline{CK}$) **closes**. The **Logic 0** from Inv₁ now passes to the input of Inv₂.\n*   The signal passes through Inv₂ (becomes 1) and Inv₃ (becomes **0**).\n*   The new output of the circuit is now **Logic 0**.\n\n*If we run through the cycle again, the Logic 0 will be inverted by Inv₁ during Phase 1, and that new Logic 1 will propagate to the output during Phase 2.*\n\n### Conclusion: Circuit Function\nBecause the output state inverts exactly once per full clock cycle, this circuit functions as a **Dynamic Divide-by-2 Counter** (also known as a dynamic toggle or T-flip-flop).\n\n*   **Frequency Division:** If you input a clock signal at frequency $f$, the output at the end of the loop will be a square wave with a frequency of $f/2$.\n*   **Dynamic Nature:** It requires a continuously running clock. If the clock stops or runs too slowly, the charge holding the logic states on the inverter inputs will leak away, and the circuit will fail.",
        "format": "markdown",
        "sha256": "05853d865e0bff5599dd547d27169dc9c697cf8d8fcee93a54268366a3d646d4"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic divide-by-two circuit and explains that its output toggles at half the input-clock frequency. This satisfies the golden solution’s full-credit rule; the detailed signal tracing is not essential.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2198,
        "output_tokens": 7412,
        "total_tokens": 9610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5857,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 3645,
        "total_tokens": 4744,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2823,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is an analysis of the circuit's arrangement and function.\n\n### 1. Component Identification\nThe circuit consists of the following basic components arranged in a closed feedback loop:\n*   **Three Inverters (NOT gates):** Labeled as Inv$_1$, and two subsequent unlabeled inverters. They output the logical opposite of their input.\n*   **Two Switches:** These represent clocked pass-transistors or transmission gates.\n    *   The first switch is controlled by the clock signal **$CK$**. It closes (conducts) when $CK$ is high.\n    *   The second switch is controlled by the inverted clock signal **$\\overline{CK}$** (CK-bar). It closes when $CK$ is low.\n*   **Feedback Loop:** The output of the third inverter is fed directly back to the input of the first switch.\n\n### 2. Structural Analysis\n*   **Dynamic Logic:** This is a **dynamic** circuit. It lacks the cross-coupled inverters found in static latches (like standard SRAM cells). Instead, when a switch opens, the logic state is temporarily stored as an electrical charge on the parasitic capacitance at the input of the following inverter.\n*   **Odd Number of Inversions:** There are three inverters in the loop. An odd number of inversions in a feedback loop means that a signal will always be inverted by the time it travels completely around the loop.\n*   **Two-Phase Clocking:** The alternating $CK$ and $\\overline{CK}$ switches divide the circuit into two stages that isolate each other, preventing the circuit from oscillating uncontrollably (like a standard ring oscillator) and forcing it to advance step-by-step with the clock.\n\n### 3. Operational Analysis (Step-by-Step)\nLet's trace a signal through one full clock cycle to see how it behaves. Assume the output of the third inverter is currently at a logic **0**.\n\n**Phase 1: $CK = 1$ (High), $\\overline{CK} = 0$ (Low)**\n*   The first switch ($CK$) **closes**. The logic **0** from the end of the loop passes to the input of Inv$_1$.\n*   Inv$_1$ inverts this to a **1**. This **1** sits at the input of the second switch.\n*   The second switch ($\\overline{CK}$) is **open**. The signal cannot pass to the next stage. The subsequent inverters hold their previous state.\n\n**Phase 2: $CK = 0$ (Low), $\\overline{CK} = 1$ (High)**\n*   The first switch ($CK$) **opens**, trapping the logic 0 at the input of Inv$_1$.\n*   The second switch ($\\overline{CK}$) **closes**. The logic **1** from Inv$_1$ now passes through.\n*   The second inverter changes the **1** to a **0**.\n*   The third inverter changes the **0** back to a **1**.\n*   The output of the loop is now **1**.\n\n**Next Clock Cycle:**\nIf we repeat the process, in the next Phase 1, that new **1** will feed into Inv$_1$, become a **0**, and in Phase 2, propagate to the end, making the final output **0** again.\n\n### Conclusion: Circuit Function\nThis arrangement is a **Dynamic Divide-by-2 Circuit** (also known as a dynamic toggle flip-flop).\n\nBecause the signal is inverted exactly once per full clock cycle (due to the odd number of inverters and the two-stage clocking), the output state changes (toggles) every time the clock completes a full period. Therefore, the frequency of the signal at any point in this loop will be exactly **half the frequency of the clock signal ($CK$)**.",
        "format": "markdown",
        "sha256": "8aafe8b39feee50a7c370a69b2c79bec87425b21a47bf8f792043570c1b82bee"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic divide-by-two and explains its clocked, charge-storing operation and half-rate output. Internal inverter-path details are secondary under the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2198,
        "output_tokens": 7748,
        "total_tokens": 9946,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6197,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 3981,
        "total_tokens": 5080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3163,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its arrangement and function.\n\n### 1. Component Identification\nThe circuit consists of the following basic logic components:\n*   **Three Inverters (NOT gates):** Labeled as $Inv_1$, and two subsequent unlabelled inverters. They output the logical opposite of their input.\n*   **Two Clocked Switches (Transmission Gates):**\n    *   The first switch is controlled by the clock signal **$CK$**. It closes (conducts) when $CK$ is high.\n    *   The second switch is controlled by the inverted clock signal **$\\overline{CK}$**. It closes when $CK$ is low.\n*   **Feedback Loop:** The output of the final inverter is routed back to the input of the first switch, creating a closed loop.\n\n### 2. Circuit Topology\nThis arrangement is a **dynamic master-slave toggle flip-flop**, commonly used as a **divide-by-2 circuit**.\n*   **Master Stage:** Consists of the first switch ($CK$) and $Inv_1$.\n*   **Slave Stage:** Consists of the second switch ($\\overline{CK}$) and the two subsequent inverters.\n*   **Dynamic Nature:** Unlike static flip-flops that use cross-coupled inverters to hold a state, this circuit relies on the parasitic capacitance at the input nodes of the inverters to temporarily store voltage levels when the switches are open.\n\n### 3. Step-by-Step Operation Analysis\nTo understand how it works, let's trace a signal through one complete clock cycle. Let's assume the current output at the very end of the circuit is **$Q$**.\n\n**Phase 1: $CK = 1$ (High), $\\overline{CK} = 0$ (Low)**\n*   The first switch ($CK$) is **CLOSED**. The current output state **$Q$** feeds into $Inv_1$.\n*   $Inv_1$ inverts this signal. The node between $Inv_1$ and the second switch now holds the value **$\\overline{Q}$** (NOT $Q$).\n*   The second switch ($\\overline{CK}$) is **OPEN**. The value **$\\overline{Q}$** is trapped and stored dynamically on the parasitic capacitance of that node. The output of the circuit remains at its previous state for now.\n\n**Phase 2: $CK = 0$ (Low), $\\overline{CK} = 1$ (High)**\n*   The first switch ($CK$) is **OPEN**, isolating the input from the feedback loop.\n*   The second switch ($\\overline{CK}$) is **CLOSED**. The stored value **$\\overline{Q}$** is now allowed to pass into the slave stage.\n*   The signal passes through the second inverter, becoming **$Q$**.\n*   The signal passes through the third inverter, becoming **$\\overline{Q}$**.\n*   The new output of the circuit is now **$\\overline{Q}$**.\n\n### 4. Conclusion\nBecause there is an **odd number of inverters (3)** in the feedback loop, the circuit naturally wants to oscillate. However, the alternating clocked switches control this oscillation.\n\nEvery time the clock completes one full cycle ($CK$ goes High $\\rightarrow$ Low $\\rightarrow$ High), the output of the circuit changes state exactly once. Therefore, the output frequency of this circuit will be exactly **half of the input clock frequency**.\n\n**Summary:** The figure shows a **dynamic divide-by-two circuit** (or dynamic T-flip-flop).",
        "format": "markdown",
        "sha256": "2cc904314166672e404d5bd999109130723d36552a436312d75540d3c5b88587"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic-latch divide-by-two and states that its output runs at half the input clock frequency. The detailed signal-path explanation is secondary under the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2198,
        "output_tokens": 8066,
        "total_tokens": 10264,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6482,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 3590,
        "total_tokens": 4689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2828,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, the red inverter acts as a **keeper** (or feedback) inverter. It forms a cross-coupled latch with $Inv_1$.\n\nHere is a detailed breakdown of how it affects the circuit's performance, categorized by its positive and negative impacts:\n\n### 1. Positive Effects (Reliability and Robustness)\nWithout the red inverter, the node between the first switch (CK) and $Inv_1$ would be a **dynamic node**. When the CK switch opens, that node would be left floating, holding its logic state only via parasitic capacitance. The red inverter converts this into a **static node**.\n\n*   **Prevents Charge Leakage:** In a dynamic circuit, charge slowly leaks away over time due to transistor imperfections. If the clock frequency is too slow, the circuit will lose its stored value and fail. The red inverter actively drives the node, maintaining the logic level indefinitely. This allows the circuit to operate at very low clock frequencies or even be paused completely.\n*   **Improves Noise Immunity:** A floating dynamic node is highly susceptible to external noise and capacitive coupling (crosstalk) from adjacent wires, which can easily flip its state. The red inverter actively resists these voltage spikes, pulling the node back to a solid logic '1' or '0', thereby significantly improving the circuit's noise margin.\n\n### 2. Negative Effects (Speed and Power)\nWhile it improves reliability, adding the red inverter introduces trade-offs in speed and power consumption.\n\n*   **Introduces Contention (Slower Switching):** When the CK switch closes to write a *new* value into $Inv_1$, the incoming signal must \"fight\" and overpower the red inverter, which is trying to maintain the *old* value. This contention increases the time it takes for the node to change state, thereby increasing the propagation delay (slowing down the circuit).\n*   **Increased Power Consumption:** During the brief moment of contention when the state is flipping, there is a direct path for current to flow from the power supply to the ground (short-circuit power). This increases the dynamic power consumption of the circuit.\n*   **Added Capacitance:** The red inverter adds extra gate and diffusion capacitance to the nodes it connects to, which also slightly slows down signal transitions.\n\n### Summary\nTo minimize the negative performance impacts while keeping the positive ones, the red inverter is typically designed to be a **\"weak\" inverter** (using transistors with small width-to-length ratios). This ensures it is strong enough to hold the state against leakage and minor noise, but weak enough to be easily overpowered by the input signal when the clock switch closes.",
        "format": "markdown",
        "sha256": "2ff9541dde3e4d9b77dd53e3b98e9b34da3baf02f39dd89595bed7a2aab63a75"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as a keeper that makes a dynamic node static, and claims it enables lower-frequency operation—the opposite of the actual tradeoff. It misses the feedforward speed benefit and the unclocked branch that raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2156,
        "output_tokens": 9026,
        "total_tokens": 11182,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8013,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 2518,
        "total_tokens": 3596,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1962,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the red inverter acts as a **keeper** (or feedback) inverter. It transforms the first stage of this circuit from a *dynamic* latch into a *static* latch.\n\nHere is a detailed breakdown of how the red inverter affects the performance of the circuit:\n\n### 1. Improves Robustness and Reliability (The Primary Benefit)\n*   **Prevents Floating Nodes:** Without the red inverter, when the switch $CK$ opens, the input to $Inv_1$ relies solely on parasitic capacitance to hold its voltage value. Over time, leakage currents will cause this voltage to drift, potentially corrupting the data. The red inverter creates a positive feedback loop (a cross-coupled pair) that actively holds the node at a solid logic '1' or '0'.\n*   **Enables Low-Frequency Operation:** Because it prevents voltage drift, the circuit can operate at very low clock frequencies, or even be paused indefinitely, without losing its state. Without it, there would be a minimum clock frequency requirement.\n*   **Increases Noise Immunity:** A floating node is highly susceptible to external noise (like crosstalk from adjacent wires). The red inverter actively drives the node, making it much harder for noise to accidentally flip the state of $Inv_1$.\n\n### 2. Decreases Speed (The Trade-off)\n*   **Contention (The \"Fight\"):** When the switch $CK$ closes to write a *new* value into the latch, the driving circuit (the output of the last inverter on the right) must overpower the red inverter. For example, if the red inverter is currently holding the node at '1', and the new input is trying to drive it to '0', there is a brief period where the two circuits fight each other. This contention increases the time it takes for the node to transition, thereby increasing the propagation delay (slowing down the circuit).\n*   **Increased Capacitive Loading:** The red inverter adds physical transistors to the circuit. The gate capacitance of the red inverter loads the output of $Inv_1$, and the drain capacitance of the red inverter loads the input of $Inv_1$. This extra capacitance slows down the rise and fall times of the signals.\n\n### 3. Impact on Power Consumption\n*   **Dynamic Power:** It slightly *increases* dynamic power consumption due to the short-circuit current that occurs during the \"contention\" phase mentioned above, as well as the energy required to charge/discharge the extra parasitic capacitance it introduces.\n*   **Static Power:** It *decreases* the risk of high static power consumption. If the red inverter were absent and the input node drifted to an intermediate voltage (between '0' and '1'), $Inv_1$ could enter its linear region, causing a massive, continuous short-circuit current from power to ground.\n\n### Summary: How Designers Handle This\nTo get the benefits of the red inverter (stability) while minimizing the drawbacks (slowness and contention), circuit designers make the red inverter intentionally **weak**.\n\nThey design it using transistors with very small widths and long lengths. This ensures it provides just enough current to overcome leakage and hold the state, but is weak enough to be easily overpowered by the main driving circuit when $CK$ closes, minimizing the delay penalty.",
        "format": "markdown",
        "sha256": "d356e2d6c5d69e2aa61538ff22fdc1aa35a9ed0acb0136a1477f5d4c2e92a38d"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a keeper/static latch and claims it enables low-frequency operation and slows the circuit. In fact, it is an unclocked feedforward path that bypasses part of the first latch and improves speed, but can interfere at low clock rates and raise the minimum usable frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2156,
        "output_tokens": 4126,
        "total_tokens": 6282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2756,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 2063,
        "total_tokens": 3141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1378,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the red inverter acts as a **\"keeper\"** or feedback inverter. It is connected in anti-parallel with $Inv_1$, forming a cross-coupled inverter pair (a latch).\n\nHere is a detailed breakdown of how it affects the circuit's performance, categorized by its positive and negative impacts:\n\n### 1. Positive Impacts (Robustness and Reliability)\n\nWithout the red inverter, the circuit operates as a **dynamic latch**. When the $CK$ switch opens, the input to $Inv_1$ is left floating, and the logic state is held only by the parasitic capacitance of the inverter's input gate. The red inverter converts this into a **static latch**.\n\n*   **Prevents Leakage (Enables Low-Frequency Operation):** In a dynamic circuit, charge slowly leaks away from the floating node over time. If the clock frequency is too slow, the circuit will lose its state. The red inverter actively drives the node, replenishing any lost charge. This allows the circuit to hold its state indefinitely, enabling it to operate at very low clock frequencies or even be paused (clock gating).\n*   **Improves Noise Immunity:** A floating node is highly susceptible to noise (like crosstalk from adjacent wires). Because the red inverter actively drives the input node of $Inv_1$ to either VDD or Ground, it makes the node much more resistant to electrical noise and voltage spikes.\n\n### 2. Negative Impacts (Speed, Power, and Area)\n\nWhile it improves reliability, adding the keeper inverter introduces trade-offs in other performance metrics.\n\n*   **Increases Delay (Contention):** When the $CK$ switch closes to write a *new* logic state into $Inv_1$, the incoming signal must \"fight\" the red inverter. For example, if the latch is currently holding a '1', the red inverter is actively trying to keep it at '1'. If the new input is a '0', the driving circuit must overpower the red inverter to force the node to '0'. This contention increases the time it takes for the node to flip, thereby **increasing the setup time and propagation delay** of the circuit.\n    *   *Note:* To minimize this delay, the red inverter is typically designed to be very \"weak\" (using transistors with high resistance/small width) compared to the circuit driving the input.\n*   **Increases Power Consumption:** During the brief moment when the incoming signal is fighting the red inverter to change the state, a short-circuit path is created between VDD and Ground (one is pulling up, the other is pulling down). This increases the dynamic power consumption of the circuit.\n*   **Increases Area:** Adding the inverter requires additional transistors (one PMOS and one NMOS), which slightly increases the physical footprint of the circuit on the silicon.\n\n### Summary\nThe red inverter trades a small amount of **speed and power** in exchange for a significant increase in **stability, noise immunity, and the ability to operate at low clock speeds**.",
        "format": "markdown",
        "sha256": "a7cd20669027d8e8cdaf82ffad79c739a02b6e2539ba1086af2c4e39a1b495cf"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as a keeper/static latch and claims it enables lower-frequency operation and worsens speed. In fact, it is an unclocked feedforward path that improves high-speed operation but raises the minimum usable clock frequency because it can overwhelm the main path at low frequencies.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 5006,
        "total_tokens": 7163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3767,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 2384,
        "total_tokens": 3463,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1751,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, **I do not agree with the answer.**\n\nHere is a detailed breakdown of why the answer is incorrect and what the red inverter actually does as drawn:\n\n### 1. Why it is NOT a keeper for `Inv1`\nThe purpose of a keeper in this type of circuit (a dynamic latch or flip-flop) is to hold the voltage level of a node when it is disconnected from its driver, preventing it from drifting due to leakage currents.\n*   **The Vulnerable Node:** In the master stage, the vulnerable dynamic node is the one **between** the $CK$ switch and `Inv1`. When the $CK$ switch opens, this node floats.\n*   **The Flaw:** For the red inverter to act as a keeper and form a cross-coupled latch with `Inv1`, its output must connect to that vulnerable node (the input of `Inv1`). However, in the diagram, the red inverter's output connects to the node **before** the $CK$ switch.\n*   **Result:** When the $CK$ switch is open (which is exactly when a keeper is needed), the red inverter is physically disconnected from the input of `Inv1`. Therefore, it cannot hold the state of `Inv1`, and the circuit still has a minimum clock frequency requirement due to leakage at that node.\n\n### 2. The actual role of the red inverter (as drawn)\nAs drawn, the red inverter actually creates a functional problem in the circuit: **contention (a short circuit).**\n\nLet's trace the operation to see why:\nThis circuit is a divide-by-2 toggle flip-flop (it feeds the inverted output back to the input).\n1.  **Phase 1 ($CK$ closed, $\\overline{CK}$ open):** Let's say the input node (before the switch) is `0`. It passes through the switch. `Inv1` outputs a `1`. The red inverter takes this `1` and outputs a `0` back onto the input node. In this phase, it just reinforces the current input.\n2.  **Phase 2 ($CK$ open, $\\overline{CK}$ closed):** The $CK$ switch opens. `Inv1` is still outputting a `1` (temporarily, until it leaks). The red inverter is therefore still driving a **`0`** onto the main input line.\n    *   Meanwhile, the `1` from `Inv1` passes through the $\\overline{CK}$ switch.\n    *   It goes through the next two inverters (which act as a buffer, double-inverting it).\n    *   Wait, let's look at the main loop: it has 3 inverters total (`Inv1`, plus the two on the right). This means it inverts the signal.\n    *   If `Inv1` output is `1`, the final output fed back to the start will be **`1`**.\n    *   **The Conflict:** The main feedback loop is trying to drive the input node to **`1`** (the new toggled state), but the red inverter is still actively driving that exact same node to **`0`** (based on the old state).\n\n### Conclusion\nThe person who provided that answer likely **intended** to describe a standard keeper circuit, but the schematic is drawn incorrectly.\n\n*   **To match the quote:** The red line should connect to the wire *between* the $CK$ switch and `Inv1`.\n*   **As drawn:** The red inverter fails to act as a keeper and instead causes a short-circuit conflict during the evaluation phase of the flip-flop.",
        "format": "markdown",
        "sha256": "5a306f831d1ea9e15ce61fa30a7ea8ba8e76ef020aa2a37820014b49c3f8204a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper interpretation, but reverses the red inverter’s connections and incorrectly claims it shorts the input. The actual branch is feedforward: it bypasses the CK switch and Inv1, helping at high speeds but potentially overpowering the latch at low clock rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2250,
        "output_tokens": 15006,
        "total_tokens": 17256,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13530,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 7478,
        "total_tokens": 8603,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, **I do not agree with the answer.**\n\nHere is a detailed breakdown of why the answer is incorrect and what the red inverter actually does as drawn:\n\n### 1. Why it is NOT a keeper for `Inv1`\nThe purpose of a keeper in this type of circuit (a dynamic latch or flip-flop) is to hold the voltage level of a node when it is disconnected from its driver, preventing it from drifting due to leakage currents.\n*   **The Vulnerable Node:** In the master stage, the vulnerable dynamic node is the one **between** the $CK$ switch and `Inv1`. When the $CK$ switch opens, this node floats.\n*   **The Flaw:** For the red inverter to act as a keeper and form a cross-coupled latch with `Inv1`, its output must connect to that vulnerable node (the input of `Inv1`). However, in the diagram, the red inverter's output connects to the node **before** the $CK$ switch.\n*   **Result:** When the $CK$ switch is open (which is exactly when a keeper is needed), the red inverter is physically disconnected from the input of `Inv1`. Therefore, it cannot hold the state of `Inv1`, and the circuit still has a minimum clock frequency requirement due to leakage at that node.\n\n### 2. The actual role of the red inverter (as drawn)\nAs drawn, the red inverter actually creates a functional problem in the circuit: **contention (a short circuit).**\n\nLet's trace the operation to see why:\nThis circuit is a divide-by-2 toggle flip-flop (it feeds the inverted output back to the input).\n1.  **Phase 1 ($CK$ closed, $\\overline{CK}$ open):** Let's say the input node (before the switch) is `0`. It passes through the switch. `Inv1` outputs a `1`. The red inverter takes this `1` and outputs a `0` back onto the input node. In this phase, it just reinforces the current input.\n2.  **Phase 2 ($CK$ open, $\\overline{CK}$ closed):** The $CK$ switch opens. `Inv1` is still outputting a `1` (temporarily, until it leaks). The red inverter is therefore still driving a **`0`** onto the main input line.\n    *   Meanwhile, the `1` from `Inv1` passes through the $\\overline{CK}$ switch.\n    *   It goes through the next two inverters (which act as a buffer, double-inverting it).\n    *   Wait, let's look at the main loop: it has 3 inverters total (`Inv1`, plus the two on the right). This means it inverts the signal.\n    *   If `Inv1` output is `1`, the final output fed back to the start will be **`1`**.\n    *   **The Conflict:** The main feedback loop is trying to drive the input node to **`1`** (the new toggled state), but the red inverter is still actively driving that exact same node to **`0`** (based on the old state).\n\n### Conclusion\nThe person who provided that answer likely **intended** to describe a standard keeper circuit, but the schematic is drawn incorrectly.\n\n*   **To match the quote:** The red line should connect to the wire *between* the $CK$ switch and `Inv1`.\n*   **As drawn:** The red inverter fails to act as a keeper and instead causes a short-circuit conflict during the evaluation phase of the flip-flop.",
        "format": "markdown",
        "sha256": "5a306f831d1ea9e15ce61fa30a7ea8ba8e76ef020aa2a37820014b49c3f8204a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper interpretation, but reverses the red inverter’s connections and incorrectly claims it shorts the input. The actual branch is feedforward: it bypasses the CK switch and Inv1, helping at high speeds but potentially overpowering the latch at low clock rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2250,
        "output_tokens": 14956,
        "total_tokens": 17206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13398,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 7478,
        "total_tokens": 8603,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, **I do not agree with the answer.**\n\nHere is a detailed breakdown of why the answer is incorrect and what the red inverter actually does as drawn:\n\n### 1. Why it is NOT a keeper for `Inv1`\nThe purpose of a keeper in this type of circuit (a dynamic latch or flip-flop) is to hold the voltage level of a node when it is disconnected from its driver, preventing it from drifting due to leakage currents.\n*   **The Vulnerable Node:** In the master stage, the vulnerable dynamic node is the one **between** the $CK$ switch and `Inv1`. When the $CK$ switch opens, this node floats.\n*   **The Flaw:** For the red inverter to act as a keeper and form a cross-coupled latch with `Inv1`, its output must connect to that vulnerable node (the input of `Inv1`). However, in the diagram, the red inverter's output connects to the node **before** the $CK$ switch.\n*   **Result:** When the $CK$ switch is open (which is exactly when a keeper is needed), the red inverter is physically disconnected from the input of `Inv1`. Therefore, it cannot hold the state of `Inv1`, and the circuit still has a minimum clock frequency requirement due to leakage at that node.\n\n### 2. The actual role of the red inverter (as drawn)\nAs drawn, the red inverter actually creates a functional problem in the circuit: **contention (a short circuit).**\n\nLet's trace the operation to see why:\nThis circuit is a divide-by-2 toggle flip-flop (it feeds the inverted output back to the input).\n1.  **Phase 1 ($CK$ closed, $\\overline{CK}$ open):** Let's say the input node (before the switch) is `0`. It passes through the switch. `Inv1` outputs a `1`. The red inverter takes this `1` and outputs a `0` back onto the input node. In this phase, it just reinforces the current input.\n2.  **Phase 2 ($CK$ open, $\\overline{CK}$ closed):** The $CK$ switch opens. `Inv1` is still outputting a `1` (temporarily, until it leaks). The red inverter is therefore still driving a **`0`** onto the main input line.\n    *   Meanwhile, the `1` from `Inv1` passes through the $\\overline{CK}$ switch.\n    *   It goes through the next two inverters (which act as a buffer, double-inverting it).\n    *   Wait, let's look at the main loop: it has 3 inverters total (`Inv1`, plus the two on the right). This means it inverts the signal.\n    *   If `Inv1` output is `1`, the final output fed back to the start will be **`1`**.\n    *   **The Conflict:** The main feedback loop is trying to drive the input node to **`1`** (the new toggled state), but the red inverter is still actively driving that exact same node to **`0`** (based on the old state).\n\n### Conclusion\nThe person who provided that answer likely **intended** to describe a standard keeper circuit, but the schematic is drawn incorrectly.\n\n*   **To match the quote:** The red line should connect to the wire *between* the $CK$ switch and `Inv1`.\n*   **As drawn:** The red inverter fails to act as a keeper and instead causes a short-circuit conflict during the evaluation phase of the flip-flop.",
        "format": "markdown",
        "sha256": "5a306f831d1ea9e15ce61fa30a7ea8ba8e76ef020aa2a37820014b49c3f8204a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper interpretation, but reverses the red inverter’s connections and incorrectly claims it shorts the input. The actual branch is feedforward: it bypasses the CK switch and Inv1, helping at high speeds but potentially overpowering the latch at low clock rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2250,
        "output_tokens": 14777,
        "total_tokens": 17027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13461,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 7478,
        "total_tokens": 8603,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the Noise Figure (NF) of the given inverter-based Low Noise Amplifier (LNA) while keeping the input resistance ($R_{in}$) matched to $50\\ \\Omega$, you need to understand the trade-off between the feedback resistor, the transistor transconductance, and the resulting noise.\n\nHere is the step-by-step optimization strategy:\n\n### 1. Maximize the Feedback Resistor ($R_F$)\nThe feedback resistor $R_F$ is a major source of thermal noise in this topology. It can be modeled as a noise current source $\\overline{i_{n,RF}^2} = \\frac{4kT}{R_F} \\Delta f$ connected between the input and output. \n*   To minimize its noise contribution to the overall circuit, **$R_F$ should be made as large as possible.** \n\n### 2. Increase the Transconductance ($G_m$) to Maintain Matching\nYou cannot simply increase $R_F$ without affecting the input matching. The input resistance of this circuit is largely determined by the Miller effect on the feedback resistor:\n$$R_{in} \\approx \\frac{R_F}{1 + |A_v|}$$\nwhere $A_v$ is the voltage gain of the inverter stage. The gain is approximately $A_v \\approx -G_m (R_F \\parallel R_{out})$, where $G_m = g_{m1} + g_{m2}$ is the total transconductance of the NMOS and PMOS transistors.\n\n*   If you increase $R_F$ (to improve NF), the numerator of the $R_{in}$ equation increases. \n*   To keep $R_{in}$ constant at $50\\ \\Omega$, you must proportionally increase the denominator, which means increasing the voltage gain $|A_v|$.\n*   Therefore, **you must increase the total transconductance ($G_m$) of the transistors.**\n\n### 3. How to Achieve This Practically\nTo increase $G_m$ while maintaining the proper DC bias (usually $V_{out} \\approx V_{DD}/2$ for maximum swing), you must:\n*   **Increase the bias current ($I_D$)** flowing through the transistors.\n*   **Increase the widths ($W$)** of both $M_1$ and $M_2$ to support this higher current while maintaining a good overdrive voltage for high-frequency performance.\n\n### Summary of the Trade-off\nThe optimization of this specific circuit is a direct trade-off between Noise Figure and Power Consumption. \n**To get the best (lowest) NF, you must design for a large $R_F$ and burn more power to achieve a high enough $G_m$ to force the input impedance back down to $50\\ \\Omega$.** \n\n*(Note: The AC coupling capacitor $C_1$ should simply be sized large enough so that its impedance is negligible at the operating frequency, ensuring it does not degrade the NF or the $50\\ \\Omega$ match).*",
        "format": "markdown",
        "sha256": "8a15847ccb37a46efdf3b88c64f6fbe03edc08adaaa5dac9c67f81c0b83875e9"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly recommends increasing gm and RF together to preserve the 50Ω match while reducing NF. Its loaded-gain relation includes finite output resistance, and the stated power tradeoff is consistent with the optimization.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2232,
        "output_tokens": 42578,
        "total_tokens": 44810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40706,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 27207,
        "total_tokens": 28323,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the Noise Figure (NF) of the inverter-based Low Noise Amplifier (LNA) shown in the figure while maintaining an input resistance ($R_{in}$) of $50\\ \\Omega$, we need to analyze the relationship between the circuit parameters, the input match, and the noise contributors.\n\nHere is the step-by-step optimization strategy:\n\n### 1. Understand the Key Equations\nThe circuit is a self-biased inverter with resistive feedback. \n*   **Total Transconductance ($G_m$):** Both the NMOS ($M_1$) and PMOS ($M_2$) contribute to the gain. $G_m = g_{m1} + g_{m2}$.\n*   **Input Resistance ($R_{in}$):** The input resistance is determined by the feedback resistor ($R_F$), the total transconductance ($G_m$), and the total load resistance at the output node ($R_L$, which includes the intrinsic output resistance $r_o$ of the transistors).\n    $$R_{in} \\approx \\frac{R_F + R_L}{1 + G_m R_L}$$\n*   **Noise Factor ($F$):** A simplified, first-order equation for the noise factor of this topology (assuming $R_{in}$ is matched to the source resistance $R_S = 50\\ \\Omega$) is:\n    $$F \\approx 1 + \\frac{R_S}{R_F} + \\frac{\\gamma}{G_m R_S}$$\n    *(Where $\\gamma$ is the transistor channel noise coefficient, typically $\\approx 2/3$ to $1$)*\n\n### 2. Identify the Noise Contributors\nFrom the Noise Factor equation, we can see there are two main sources of noise we need to minimize:\n1.  **Thermal noise from $R_F$:** Represented by the term $\\frac{R_S}{R_F}$. To minimize this, **$R_F$ must be as large as possible**.\n2.  **Channel noise from $M_1$ and $M_2$:** Represented by the term $\\frac{\\gamma}{G_m R_S}$. To minimize this, **$G_m$ must be as large as possible**.\n\n### 3. The Optimization Strategy\nYou cannot change $R_F$ and $G_m$ independently because you are constrained by $R_{in} = 50\\ \\Omega$. If we rearrange the $R_{in}$ equation to solve for $R_F$:\n$$R_F = R_{in}(1 + G_m R_L) - R_L$$\nSubstituting $R_{in} = 50\\ \\Omega$:\n$$R_F = 50 + 50 G_m R_L - R_L$$\n\nThis equation reveals the core optimization strategy: **To use a larger $R_F$ (which reduces noise), you MUST increase $G_m$.**\n\nTherefore, the optimization steps are:\n1.  **Maximize $G_m$:** Increase the widths ($W$) of transistors $M_1$ and $M_2$ and/or increase the bias current ($I_{DD}$). Note that the inverter topology already helps here by reusing the same bias current for both transistors, effectively doubling $G_m$ for a given power budget compared to a single-transistor design.\n2.  **Scale $R_F$ accordingly:** As you increase $G_m$, the input impedance will naturally drop. To bring $R_{in}$ back up to exactly $50\\ \\Omega$, you must increase the value of the feedback resistor $R_F$.\n3.  **Result:** By simultaneously increasing $G_m$ and $R_F$ to maintain the $50\\ \\Omega$ match, you drive down both the transistor noise and the resistor noise, yielding the optimal (lowest) Noise Figure.\n\n### 4. Practical Limitations\nIn a real-world design, you cannot increase $G_m$ and $R_F$ infinitely due to two main constraints:\n*   **Power Consumption:** Increasing $G_m$ usually requires burning more DC bias current.\n*   **Parasitic Capacitance:** Increasing $G_m$ by making the transistors wider increases their gate-to-source ($C_{gs}$) and gate-to-drain ($C_{gd}$) capacitances. At high frequencies (RF), this parasitic capacitance will shunt the input, lowering the input impedance and ruining your $50\\ \\Omega$ match. You must stop increasing transistor size when the capacitive reactance begins to dominate the input impedance at your operating frequency.",
        "format": "markdown",
        "sha256": "8501b47100edb8d887922691bf4601ed5cc6de5b83e17d36032e1f0b2852b17a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It includes the finite-output-resistance input-match relation and correctly recommends increasing gm while adjusting RF to keep Rin at 50 Ω, allowing NF to fall as gm rises. The practical limits are appropriate; the approximate noise expression does not change the core conclusion.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2232,
        "output_tokens": 29325,
        "total_tokens": 31557,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 16703,
        "total_tokens": 17819,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15701,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the Noise Figure (NF) of the given inverter-based Low Noise Amplifier (LNA) while maintaining an input resistance ($R_{in}$) of $50\\ \\Omega$, we need to analyze the equations governing its input impedance and noise.\n\n### 1. Understand the Governing Equations\nThe circuit is a self-biased CMOS inverter with resistive feedback. Both the NMOS ($M_1$) and PMOS ($M_2$) act as transconductors.\n*   **Total Transconductance:** $g_m = g_{m1} + g_{m2}$\n*   **Output Resistance:** $R_{out} = r_{o1} \\parallel r_{o2} \\parallel R_L$ (where $R_L$ is any external load).\n*   **Voltage Gain:** $A_v \\approx -g_m R_{out}$\n\n**Input Resistance ($R_{in}$):**\nUsing the Miller effect or nodal analysis, the input resistance is approximately:\n$$R_{in} = \\frac{R_F + R_{out}}{1 + g_m R_{out}}$$\nAssuming the voltage gain is reasonably high ($g_m R_{out} \\gg 1$), this simplifies to:\n$$R_{in} \\approx \\frac{R_F}{g_m R_{out}} \\approx \\frac{R_F}{|A_v|}$$\n\n**Noise Figure (NF):**\nThe noise factor $F$ for this topology (assuming $R_{in}$ is matched to the source resistance $R_S = 50\\ \\Omega$) can be approximated by:\n$$F \\approx 1 + \\frac{R_S}{R_F} + \\frac{\\gamma}{g_m R_S} \\left(1 + \\frac{R_S}{R_F}\\right)^2$$\nWhere:\n*   $\\frac{R_S}{R_F}$ represents the thermal noise contribution of the feedback resistor $R_F$.\n*   The term containing $\\gamma$ (channel noise coefficient) represents the thermal noise contribution of the transistors $M_1$ and $M_2$.\n\n### 2. Optimization Strategy\nTo minimize the Noise Figure $F$, we need to minimize the two noise contribution terms in the equation above:\n1.  **Minimize Resistor Noise:** We must make **$R_F$ as large as possible**.\n2.  **Minimize Transistor Noise:** We must make **$g_m$ as large as possible**.\n\n**Applying the Constraint ($R_{in} = 50\\ \\Omega$):**\nIf we look at the simplified input resistance equation $R_{in} \\approx \\frac{R_F}{g_m R_{out}}$, we can see how to satisfy both the optimization goals and the constraint simultaneously:\n*   If we increase $g_m$ (to reduce transistor noise), $R_{in}$ will drop below $50\\ \\Omega$.\n*   To bring $R_{in}$ back up to $50\\ \\Omega$, we must **proportionally increase $R_F$**.\n*   Increasing $R_F$ perfectly aligns with our goal to reduce the resistor's noise contribution.\n\n### 3. How to Implement This\nTo achieve this optimization in the physical circuit design:\n1.  **Increase Transistor Sizes:** Increase the widths ($W$) of both $M_1$ and $M_2$. This will increase the total transconductance ($g_m$). Because the circuit is self-biased (DC input = DC output $\\approx V_{DD}/2$), increasing the widths will also proportionally increase the DC bias current ($I_D$).\n2.  **Increase $R_F$:** As you increase the transistor sizes, continuously increase the value of $R_F$ to ensure the input impedance remains matched at $50\\ \\Omega$.\n\n### 4. Practical Limitations (The Trade-offs)\nYou cannot increase $g_m$ and $R_F$ infinitely. The optimization is bounded by two main practical limits:\n*   **Power Consumption:** Increasing $g_m$ by increasing transistor widths results in a higher bias current, which increases the total power consumption of the LNA. You must stop when you hit your power budget.\n*   **Parasitic Capacitances (Bandwidth Limit):** Larger transistors have larger gate-source ($C_{gs}$) and gate-drain ($C_{gd}$) capacitances.\n    *   The total input capacitance is roughly $C_{in} \\approx C_{gs,tot} + (1 + |A_v|)C_{gd,tot}$ (due to the Miller effect).\n    *   At high frequencies, this parasitic capacitance will shunt the input, lowering the actual $Z_{in}$ below $50\\ \\Omega$, ruining the impedance match, and degrading the high-frequency Noise Figure.\n\n**Conclusion:**\nTo optimize the NF while keeping $R_{in} = 50\\ \\Omega$, you must **scale up the transistor widths (to increase $g_m$) and simultaneously increase the value of $R_F$**, stopping only when you reach your maximum allowable power consumption or when parasitic capacitances begin to degrade the required RF bandwidth.",
        "format": "markdown",
        "sha256": "9a9022f9be4ea4c56b0a85028290134e7271f27a18f925cf3c55df595dbb057e"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It uses the finite-output-resistance input-match relation and correctly recommends increasing gm while raising RF to preserve 50 Ω. Its noise discussion supports the key result that NF can keep falling as gm rises; the practical power and capacitance tradeoffs are also appropriate.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2232,
        "output_tokens": 39277,
        "total_tokens": 41509,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 37075,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 12137,
        "total_tokens": 13253,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11010,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance $R_{\\text{in}}$ of the given circuit, we will perform a small-signal analysis. We assume the transistors are operating in the saturation region and, for simplicity, we will initially neglect the channel-length modulation effect (i.e., assume $r_o \\to \\infty$).\n\n**1. Identify the Amplifier Stages**\nThe circuit consists of two main amplifying stages with a feedback resistor $R_F$:\n*   **First Stage:** Transistor $M_1$ acts as a common-source amplifier. The input signal is applied to its gate (node $P$), and the output is taken at its drain (node $X$).\n*   **Second Stage:** Transistors $M_2$ and $M_3$ form a PMOS differential pair. The input to this stage is at the gate of $M_2$ (node $X$), and the other input (gate of $M_3$) is connected to a DC bias voltage $V_b$, which is an AC ground. The output is taken at the drain of $M_3$ (node $V_{\\text{out}}$).\n\n**2. Small-Signal Analysis of the Forward Path**\nLet's apply a test voltage $v_{\\text{in}}$ at node $P$.\n*   **Node X:** The small-signal voltage at node $X$ is determined by the transconductance of $M_1$ and the load resistor $R_{D1}$:\n    $$v_x = -g_{m1} R_{D1} v_{\\text{in}}$$\n*   **Differential Pair ($M_2, M_3$):** The differential pair converts the voltage $v_x$ into a current $i_{d3}$ that flows out of the drain of $M_3$ and into the output node.\n    Let's find the transconductance of this stage. The small-signal source voltage $v_s$ of the pair is determined by KCL at the common source node:\n    $$g_{m2}(v_s - v_x) + g_{m3}(v_s - 0) = 0 \\implies v_s = \\frac{g_{m2}}{g_{m2} + g_{m3}} v_x$$\n    The small-signal current $i_{d3}$ flowing into the output node is:\n    $$i_{d3} = g_{m3} v_s = \\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}} v_x$$\n    Let's define the effective transconductance of the second stage as $G_{m2} = \\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}$. (Note: If $M_2$ and $M_3$ are matched such that $g_{m2} = g_{m3} = g_m$, then $G_{m2} = g_m / 2$).\n    Substituting $v_x$:\n    $$i_{d3} = G_{m2} (-g_{m1} R_{D1} v_{\\text{in}}) = -g_{m1} G_{m2} R_{D1} v_{\\text{in}}$$\n\n**3. KCL at the Output Node**\nNow, we apply Kirchhoff's Current Law at the output node $V_{\\text{out}}$. The sum of currents leaving the node must be zero:\n$$\\frac{v_{\\text{out}}}{R_{D2}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{R_F} - i_{d3} = 0$$\nSubstitute the expression for $i_{d3}$:\n$$\\frac{v_{\\text{out}}}{R_{D2}} + \\frac{v_{\\text{out}}}{R_F} - \\frac{v_{\\text{in}}}{R_F} - (-g_{m1} G_{m2} R_{D1} v_{\\text{in}}) = 0$$\n$$v_{\\text{out}} \\left( \\frac{1}{R_{D2}} + \\frac{1}{R_F} \\right) = v_{\\text{in}} \\left( \\frac{1}{R_F} - g_{m1} G_{m2} R_{D1} \\right)$$\nMultiply both sides by $R_{D2} R_F$:\n$$v_{\\text{out}} (R_F + R_{D2}) = v_{\\text{in}} (R_{D2} - g_{m1} G_{m2} R_{D1} R_{D2} R_F)$$\n$$v_{\\text{out}} = v_{\\text{in}} \\frac{R_{D2} - g_{m1} G_{m2} R_{D1} R_{D2} R_F}{R_F + R_{D2}}$$\n\n**4. Calculate Input Impedance**\nThe input impedance $R_{\\text{in}}$ is the ratio of the test voltage $v_{\\text{in}}$ to the current $i_{\\text{in}}$ drawn from the test source. Since the gate of $M_1$ draws no low-frequency current, all of $i_{\\text{in}}$ flows through $R_F$:\n$$i_{\\text{in}} = \\frac{v_{\\text{in}} - v_{\\text{out}}}{R_F}$$\nSubstitute the expression for $v_{\\text{out}}$:\n$$i_{\\text{in}} = \\frac{v_{\\text{in}}}{R_F} - \\frac{v_{\\text{in}}}{R_F} \\left( \\frac{R_{D2} - g_{m1} G_{m2} R_{D1} R_{D2} R_F}{R_F + R_{D2}} \\right)$$\n$$i_{\\text{in}} = \\frac{v_{\\text{in}}}{R_F} \\left[ 1 - \\frac{R_{D2} - g_{m1} G_{m2} R_{D1} R_{D2} R_F}{R_F + R_{D2}} \\right]$$\nFind a common denominator inside the bracket:\n$$i_{\\text{in}} = \\frac{v_{\\text{in}}}{R_F} \\left[ \\frac{R_F + R_{D2} - (R_{D2} - g_{m1} G_{m2} R_{D1} R_{D2} R_F)}{R_F + R_{D2}} \\right]$$\n$$i_{\\text{in}} = \\frac{v_{\\text{in}}}{R_F} \\left[ \\frac{R_F + g_{m1} G_{m2} R_{D1} R_{D2} R_F}{R_F + R_{D2}} \\right]$$\nCancel $R_F$ from the numerator:\n$$i_{\\text{in}} = v_{\\text{in}} \\frac{1 + g_{m1} G_{m2} R_{D1} R_{D2}}{R_F + R_{D2}}$$\nFinally, the input impedance is:\n$$R_{\\text{in}} = \\frac{v_{\\text{in}}}{i_{\\text{in}}} = \\frac{R_F + R_{D2}}{1 + g_{m1} G_{m2} R_{D1} R_{D2}}$$\n\n**Conclusion**\nAssuming the differential pair transistors $M_2$ and $M_3$ are matched with transconductance $g_{m2,3}$, we have $G_{m2} = g_{m2,3}/2$. The input impedance is:\n\n$$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + g_{m1} \\left(\\frac{g_{m2,3}}{2}\\right) R_{D1} R_{D2}}$$",
        "format": "markdown",
        "sha256": "35d2dd64588eb372339b3fa56d3f7b6e8dc849796e63c5e378afd4863458cd8e"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer derives Rin = (RF + RD2)/(1 + A0), with A0 = (1/2)gm1 gm2,3 RD1 RD2 for matched M2/M3, matching the exact result and accounting for RD2 on the feedback path.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2206,
        "output_tokens": 30463,
        "total_tokens": 32669,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26836,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 14944,
        "total_tokens": 16047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance $R_{\\text{in}}$ of the given circuit, we will perform a small-signal analysis. We assume the transistors operate in the saturation region and, for simplicity, we will ignore the channel-length modulation effect (i.e., assume output resistance $r_o \\to \\infty$) as the explicit resistors $R_{D1}$ and $R_{D2}$ typically dominate the node impedances.\n\nThe circuit consists of two forward amplifier stages and a feedback network:\n1.  **First Stage:** A common-source amplifier formed by NMOS transistor $M_1$ and load resistor $R_{D1}$.\n2.  **Second Stage:** A differential amplifier formed by PMOS transistors $M_2$ and $M_3$, biased by current source $I_{SS}$. The input is applied single-endedly to the gate of $M_2$, and the output is taken single-endedly from the drain of $M_3$.\n3.  **Feedback:** Resistor $R_F$ connects the output node ($V_{\\text{out}}$) back to the input node (P), forming a shunt-shunt feedback topology.\n\nLet's break down the analysis into steps.\n\n### Step 1: Small-Signal Parameters of the Forward Path\nLet's find the transconductance of each stage.\n*   **Stage 1 ($M_1$):**\n    Let a small-signal voltage $v_p$ be at node P. The voltage at node X (drain of $M_1$) is:\n    $$v_x = -g_{m1} R_{D1} v_p$$\n    where $g_{m1}$ is the transconductance of $M_1$.\n\n*   **Stage 2 ($M_2, M_3$):**\n    This is a PMOS differential pair. The small-signal voltage $v_x$ is applied to the gate of $M_2$, while the gate of $M_3$ is at AC ground. Let's find the short-circuit output current $i_{out2}$ from the drain of $M_3$.\n    Let $v_s$ be the small-signal voltage at the common source node.\n    The small-signal source-to-drain currents are:\n    $$i_{sd2} = g_{m2}(v_s - v_x)$$\n    $$i_{sd3} = g_{m3}(v_s - 0) = g_{m3}v_s$$\n    Applying Kirchhoff's Current Law (KCL) at the common source node (since the ideal tail current source $I_{SS}$ is an AC open circuit):\n    $$i_{sd2} + i_{sd3} = 0 \\implies g_{m2}(v_s - v_x) + g_{m3}v_s = 0$$\n    Solving for $v_s$:\n    $$v_s(g_{m2} + g_{m3}) = g_{m2}v_x \\implies v_s = \\frac{g_{m2}}{g_{m2} + g_{m3}} v_x$$\n    The current flowing into the output node from $M_3$ is $i_{sd3}$:\n    $$i_{sd3} = g_{m3}v_s = \\frac{g_{m2}g_{m3}}{g_{m2} + g_{m3}} v_x$$\n    Let's define the effective transconductance of this stage as $G_{m23} = \\frac{g_{m2}g_{m3}}{g_{m2} + g_{m3}}$. If we assume the differential pair is perfectly matched ($g_{m2} = g_{m3} = g_m$), then $G_{m23} = \\frac{g_m}{2}$.\n\n### Step 2: Applying Blackman's Impedance Formula\nBlackman's formula is a robust method for finding impedances in feedback circuits:\n$$R_{\\text{in}} = R_{\\text{in}}(g_m=0) \\frac{1 + T_{\\text{short}}}{1 + T_{\\text{open}}}$$\n\n*   **Find $R_{\\text{in}}(g_m=0)$:**\n    Turn off all dependent sources (set $g_{m1} = g_{m2} = g_{m3} = 0$). Looking into node P, the path through $M_1$ is an open circuit. The only path to ground is through the feedback resistor $R_F$ in series with the output load resistor $R_{D2}$.\n    $$R_{\\text{in}}(g_m=0) = R_F + R_{D2}$$\n\n*   **Find $T_{\\text{short}}$ (Loop gain with input shorted):**\n    If we short node P to ground, the gate voltage of $M_1$ is zero ($v_{gs1} = 0$). This kills the signal in the forward path, so the returned signal is zero.\n    $$T_{\\text{short}} = 0$$\n\n*   **Find $T_{\\text{open}}$ (Loop gain with input open):**\n    Leave node P open-circuited. Break the feedback loop at the gate of $M_1$ and apply a test voltage $v_t$.\n    1.  The voltage at node X is $v_x = -g_{m1} R_{D1} v_t$.\n    2.  The current from $M_3$ into the output node is $i_{sd3} = G_{m23} v_x = -g_{m1} G_{m23} R_{D1} v_t$.\n    3.  Since node P is open, no current flows through $R_F$. All of $i_{sd3}$ flows through $R_{D2}$ to ground.\n    4.  The output voltage is $v_{\\text{out}} = i_{sd3} R_{D2} = -g_{m1} G_{m23} R_{D1} R_{D2} v_t$.\n    5.  The returned voltage $v_r$ at node P is equal to $v_{\\text{out}}$ (since there's no voltage drop across $R_F$).\n    6.  The loop gain is $T_{\\text{open}} = -\\frac{v_r}{v_t} = g_{m1} G_{m23} R_{D1} R_{D2}$.\n\n### Step 3: Final Calculation\nSubstitute the values into Blackman's formula:\n$$R_{\\text{in}} = (R_F + R_{D2}) \\frac{1 + 0}{1 + g_{m1} G_{m23} R_{D1} R_{D2}}$$\n$$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + g_{m1} \\left( \\frac{g_{m2}g_{m3}}{g_{m2} + g_{m3}} \\right) R_{D1} R_{D2}}$$\n\nAssuming a matched differential pair ($g_{m2} = g_{m3}$), the expression simplifies to:\n$$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2}}$$\n\n*(Note: The label $R_{\\text{in}}$ in the figure specifically points to the impedance looking into node P, excluding the input capacitor $C_{\\text{in}}$. If the total input impedance including the capacitor is desired, it would be $Z_{\\text{in}} = \\frac{1}{sC_{\\text{in}}} \\parallel R_{\\text{in}}$.)*",
        "format": "markdown",
        "sha256": "8c590ada7c5402c38cd1e1411754c518e3129d8d0a46c9b6d730afc44d45d885"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The final expression matches the exact result: Rin = (RF + RD2)/(1 + A0), with A0 = gm1·(gm2gm3/(gm2+gm3))·RD1RD2, reducing to the required half-factor for a matched pair. This correctly uses the unloaded forward gain.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2206,
        "output_tokens": 41974,
        "total_tokens": 44180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 18023,
        "total_tokens": 19126,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16281,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance $R_{\\text{in}}$ of the given circuit, we will perform a small-signal analysis.\n\n**1. Circuit Analysis and Assumptions**\n*   The circuit is a transimpedance amplifier with a shunt-shunt feedback topology.\n*   **First Stage:** Transistor $M_1$ acts as a common-source amplifier.\n*   **Second Stage:** Transistors $M_2$ and $M_3$ form a PMOS differential pair.\n*   **Feedback:** Resistor $R_F$ provides negative feedback from the output to the input.\n*   **Assumptions:** We assume all transistors are operating in the saturation region. For simplicity and to derive a clear analytical expression, we will ignore channel-length modulation (assume $r_o \\to \\infty$) as the explicit load resistors $R_{D1}$ and $R_{D2}$ typically dominate the node resistances. We also assume the differential pair transistors $M_2$ and $M_3$ are matched, so $g_{m2} = g_{m3} = g_{m,dp}$.\n\n**2. Small-Signal Setup**\nTo find $R_{\\text{in}}$, we apply a test voltage $V_t$ at node $P$ and determine the current $I_t$ flowing into the node from the test source. The input resistance is then $R_{\\text{in}} = \\frac{V_t}{I_t}$.\n\n*   Voltage at node $P$: $v_p = V_t$\n*   The current $I_t$ flows entirely through the feedback resistor $R_F$ because the gate of $M_1$ draws no current.\n    $$I_t = \\frac{V_t - v_{\\text{out}}}{R_F} \\quad \\Rightarrow \\quad v_{\\text{out}} = V_t - I_t R_F \\quad \\text{--- (Equation 1)}$$\n\n**3. First Stage Analysis ($M_1$)**\nThe small-signal voltage at the gate of $M_1$ is $V_t$. The drain current is $g_{m1} V_t$, which flows through $R_{D1}$.\nThe voltage at node $X$ is:\n$$v_x = -g_{m1} R_{D1} V_t \\quad \\text{--- (Equation 2)}$$\n\n**4. Second Stage Analysis ($M_2, M_3$)**\nThe differential pair is driven by $v_x$ at the gate of $M_2$, while the gate of $M_3$ is at AC ground.\nLet $v_s$ be the small-signal voltage at the common source node of $M_2$ and $M_3$.\n*   Small-signal current of $M_2$: $i_{d2} = g_{m2}(v_s - v_x)$\n*   Small-signal current of $M_3$: $i_{d3} = g_{m3}(v_s - 0) = g_{m3}v_s$\nApplying Kirchhoff's Current Law (KCL) at the common source node (the tail current source is an AC open):\n$$i_{d2} + i_{d3} = 0 \\implies g_{m2}(v_s - v_x) + g_{m3}v_s = 0$$\nAssuming matched transistors ($g_{m2} = g_{m3}$):\n$$g_{m2}(2v_s - v_x) = 0 \\implies v_s = \\frac{v_x}{2}$$\nThe current $i_{d3}$ flowing out of the drain of $M_3$ and into the output node is:\n$$i_{d3} = g_{m3}v_s = g_{m3} \\left(\\frac{v_x}{2}\\right) = \\frac{g_{m3}}{2} v_x$$\nSubstitute $v_x$ from Equation 2:\n$$i_{d3} = \\frac{g_{m3}}{2} (-g_{m1} R_{D1} V_t) = -\\frac{g_{m1} g_{m3} R_{D1}}{2} V_t \\quad \\text{--- (Equation 3)}$$\n\n**5. Output Node KCL**\nApply KCL at the $V_{\\text{out}}$ node. The currents leaving the node must sum to zero:\n*   Current leaving through $R_{D2}$: $\\frac{v_{\\text{out}}}{R_{D2}}$\n*   Current leaving through $R_F$: $\\frac{v_{\\text{out}} - V_t}{R_F}$\n*   Current entering from $M_3$: $i_{d3}$\n$$-i_{d3} + \\frac{v_{\\text{out}}}{R_{D2}} + \\frac{v_{\\text{out}} - V_t}{R_F} = 0$$\nNotice that the current leaving through $R_F$ is exactly $-I_t$ (since $I_t$ is defined as flowing from $P$ to $V_{\\text{out}}$).\n$$-i_{d3} + \\frac{v_{\\text{out}}}{R_{D2}} - I_t = 0$$\nSubstitute $i_{d3}$ from Equation 3:\n$$-\\left(-\\frac{g_{m1} g_{m3} R_{D1}}{2} V_t\\right) + \\frac{v_{\\text{out}}}{R_{D2}} - I_t = 0$$\n$$\\frac{g_{m1} g_{m3} R_{D1}}{2} V_t + \\frac{v_{\\text{out}}}{R_{D2}} - I_t = 0$$\n\n**6. Solving for $R_{\\text{in}}$**\nSubstitute $v_{\\text{out}}$ from Equation 1 into the KCL equation:\n$$\\frac{g_{m1} g_{m3} R_{D1}}{2} V_t + \\frac{V_t - I_t R_F}{R_{D2}} - I_t = 0$$\nGroup the $V_t$ and $I_t$ terms:\n$$V_t \\left( \\frac{g_{m1} g_{m3} R_{D1}}{2} + \\frac{1}{R_{D2}} \\right) = I_t \\left( 1 + \\frac{R_F}{R_{D2}} \\right)$$\nNow, solve for the input resistance $R_{\\text{in}} = \\frac{V_t}{I_t}$:\n$$R_{\\text{in}} = \\frac{1 + \\frac{R_F}{R_{D2}}}{\\frac{1}{R_{D2}} + \\frac{g_{m1} g_{m3} R_{D1}}{2}}$$\nMultiply the numerator and denominator by $R_{D2}$:\n$$R_{\\text{in}} = \\frac{R_{D2} + R_F}{1 + \\frac{g_{m1} g_{m3} R_{D1} R_{D2}}{2}}$$\n\n*(Note: The total input impedance of the circuit, including the capacitor $C_{\\text{in}}$, would be $Z_{\\text{in}} = R_{\\text{in}} \\parallel \\frac{1}{sC_{\\text{in}}}$. The label $R_{\\text{in}}$ in the diagram specifically points to the resistive part derived above.)*\n\n**Final Answer:**\nThe input impedance $R_{\\text{in}}$ is given by:\n$$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m3} R_{D1} R_{D2}}$$",
        "format": "markdown",
        "sha256": "e6ea00ccb5f47e379fa41b512b621214c38e1238099038f40904f5a454a9dcea"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The final expression matches the exact result, including the output-side resistance: Rin = (RF + RD2)/(1 + A0), with A0 = (1/2)gm1 gm3 RD1 RD2 under the stated matched-pair assumption.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2206,
        "output_tokens": 36002,
        "total_tokens": 38208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32441,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 16477,
        "total_tokens": 17580,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14721,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, the noise from the LDO regulator translates into phase noise at the VCO output through a mechanism known as **AM-to-FM conversion** (or supply pushing). \n\nHere is the step-by-step process to compute the resulting VCO phase noise:\n\n### 1. Understand the Conversion Mechanism\nThe LDO provides the supply voltage ($V_{out}$) to the VCO. In this specific LC oscillator topology:\n*   The inductors ($L_1$) act as DC short circuits. Therefore, the DC common-mode voltage at the output nodes $X$ and $Y$ is equal to $V_{out}$.\n*   The frequency tuning is controlled by MOS varactors ($M_{v1}$ and $M_{v2}$). The capacitance of these varactors depends on the voltage across them, which is $V_{X,Y} - V_{cont}$.\n*   Because $V_{X,Y(DC)} = V_{out}$, the DC voltage across the varactors is **$V_{out} - V_{cont}$**.\n\nIf the LDO generates thermal noise, $V_{out}$ will fluctuate. This fluctuation directly modulates the voltage across the varactors, changing their capacitance and, consequently, modulating the oscillation frequency of the VCO.\n\n### 2. Define the Pushing Gain ($K_{push}$)\nTo compute the phase noise, you first need to know how sensitive the VCO's frequency is to changes in the supply voltage. This is characterized by the **pushing gain** ($K_{push}$), usually expressed in Hz/V:\n\n$$K_{push} = \\frac{\\partial f_{osc}}{\\partial V_{out}}$$\n\n*Note: This value is typically found via circuit simulation (e.g., SPICE) by sweeping the supply voltage and measuring the change in oscillation frequency.*\n\n### 3. Compute the Frequency Noise PSD\nThe LDO generates thermal noise with a Power Spectral Density (PSD) of $S_{th}$ (in $V^2/Hz$). \nThe PSD of the resulting frequency fluctuation, $S_{\\Delta f}(f)$, is the LDO noise multiplied by the square of the pushing gain:\n\n$$S_{\\Delta f}(f) = K_{push}^2 \\cdot S_{th}$$\n\n### 4. Compute the Phase Noise\nPhase is the mathematical integral of frequency over time. In the frequency domain, integration corresponds to dividing by the offset frequency $f$. Therefore, the PSD of the phase fluctuations, $S_{\\phi}(f)$ (in $rad^2/Hz$), is:\n\n$$S_{\\phi}(f) = \\frac{S_{\\Delta f}(f)}{f^2} = \\frac{K_{push}^2 \\cdot S_{th}}{f^2}$$\n\nFinally, phase noise is most commonly expressed as Single-Sideband (SSB) phase noise, denoted as $\\mathcal{L}(f)$, in units of dBc/Hz. For small phase fluctuations, $\\mathcal{L}(f)$ is half of $S_{\\phi}(f)$:\n\n$$\\mathcal{L}(f) = 10 \\log_{10} \\left( \\frac{S_{\\phi}(f)}{2} \\right)$$\n\n### Final Formula\nCombining the steps, the VCO output phase noise due to the LDO's thermal noise is computed as:\n\n$$\\mathcal{L}(f) = 10 \\log_{10} \\left( \\frac{K_{push}^2 \\cdot S_{th}}{2 f^2} \\right)$$\n\n**Key Takeaway:** Because the LDO thermal noise ($S_{th}$) is \"white\" (flat across frequencies), integrating it into phase results in a **$1/f^2$** slope (-20 dB/decade) in the VCO's phase noise profile.",
        "format": "markdown",
        "sha256": "ddf930a3f983c0be85b4283536323c35fee4365a91950753820572aecd09f15c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing through the varactors and derives the frequency-noise-to-phase-noise relation with the 1/f² dependence. It omits the design insight that Kpush is closely related to KVCO and that reducing KVCO reduces this noise conversion; “AM-to-FM” is also imprecise terminology.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2252,
        "output_tokens": 6036,
        "total_tokens": 8288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4400,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 2810,
        "total_tokens": 3936,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, the LDO provides the supply voltage ($V_{out}$) to the VCO. Therefore, the thermal noise generated by the LDO acts as **supply noise** for the VCO.\n\nTo compute the resulting VCO output phase noise, we must determine how voltage variations on the supply translate into phase variations at the output. This process is known as **AM-to-PM conversion** or **supply pushing**.\n\nHere is the step-by-step computation:\n\n### 1. Identify the Coupling Mechanism (VCO Pushing)\nIn this specific LC VCO topology, the oscillation frequency depends on the capacitance of the varactors ($M_{v1}$ and $M_{v2}$).\n*   The DC voltage at nodes X and Y is equal to the supply voltage $V_{out}$ (because the inductors $L_1$ act as DC shorts).\n*   The tuning voltage is $V_{cont}$.\n*   The voltage across the varactors is $V_{var} = V_{out} - V_{cont}$.\n\nBecause the varactor capacitance depends on the voltage across it, any noise on $V_{out}$ will modulate the varactor capacitance, thereby modulating the oscillation frequency. The sensitivity of the VCO frequency to the supply voltage is called the **pushing gain ($K_{push}$)**, typically measured in Hz/V.\n\n### 2. Relate Voltage Noise to Frequency Noise\nLet the LDO thermal noise voltage be $v_n(t)$, which has a Power Spectral Density (PSD) of $S_{th}$ (in $V^2/Hz$).\nThe instantaneous frequency deviation $\\Delta f(t)$ caused by this noise is:\n$$\\Delta f(t) = K_{push} \\cdot v_n(t)$$\n\n### 3. Relate Frequency Noise to Phase Noise\nPhase is the integral of angular frequency over time. The phase variation $\\phi(t)$ is:\n$$\\phi(t) = 2\\pi \\int \\Delta f(t) dt = 2\\pi K_{push} \\int v_n(t) dt$$\n\nIn the frequency domain, integration corresponds to dividing by $j\\omega_m$ (where $\\omega_m = 2\\pi f_m$, and $f_m$ is the offset frequency from the carrier).\n$$\\Phi(f_m) = \\frac{2\\pi K_{push}}{j 2\\pi f_m} V_n(f_m) = \\frac{K_{push}}{j f_m} V_n(f_m)$$\n\n### 4. Compute the Phase Noise Power Spectral Density\nTo find the phase noise PSD ($S_\\phi$), we square the magnitude of the transfer function and multiply it by the input noise PSD ($S_{th}$):\n$$S_\\phi(f_m) = \\left| \\frac{K_{push}}{j f_m} \\right|^2 S_{th}$$\n$$S_\\phi(f_m) = \\frac{K_{push}^2}{f_m^2} S_{th} \\quad [\\text{rad}^2/\\text{Hz}]$$\n\n### 5. Final Formula (Single-Sideband Phase Noise)\nIn RF engineering, phase noise is usually expressed as Single-Sideband (SSB) phase noise, denoted as $\\mathcal{L}(f_m)$. For small phase deviations, $\\mathcal{L}(f_m)$ is half of the double-sided phase noise PSD:\n$$\\mathcal{L}(f_m) = \\frac{1}{2} S_\\phi(f_m) = \\frac{K_{push}^2}{2 f_m^2} S_{th}$$\n\nExpressed in decibels relative to the carrier per hertz (dBc/Hz):\n$$\\mathcal{L}(f_m) = 10 \\log_{10} \\left( \\frac{K_{push}^2 \\cdot S_{th}}{2 f_m^2} \\right) \\quad [\\text{dBc/Hz}]$$\n\n**Summary of variables needed for the computation:**\n*   **$S_{th}$**: The given thermal noise PSD of the LDO ($V^2/Hz$).\n*   **$K_{push}$**: The supply pushing gain of the VCO (Hz/V), which must be found via simulation or measurement of this specific circuit.\n*   **$f_m$**: The offset frequency at which you are calculating the phase noise (Hz).",
        "format": "markdown",
        "sha256": "eb359cd0db88e07180eb61205a31f106909931c02bf46a5e9e704520871b48d0"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly uses supply pushing, converts the LDO noise through Kpush, and derives the expected 1/fm² SSB phase-noise relation. It identifies direct varactor coupling, but omits the explicit design insight that Kpush is closely related to KVCO and reducing KVCO reduces this noise conversion; calling the mechanism AM-to-PM is also imprecise.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2252,
        "output_tokens": 6748,
        "total_tokens": 9000,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4955,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 3260,
        "total_tokens": 4386,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2294,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, the LDO provides the supply voltage ($V_{out}$) to the VCO. Therefore, the thermal noise generated by the LDO acts as **supply noise** for the VCO.\n\nTo compute the resulting VCO output phase noise, we must determine how voltage variations on the supply translate into phase variations at the output. This process is known as **AM-to-PM conversion** or **supply pushing**.\n\nHere is the step-by-step computation:\n\n### 1. Identify the Coupling Mechanism (VCO Pushing)\nIn this specific LC VCO topology, the oscillation frequency depends on the capacitance of the varactors ($M_{v1}$ and $M_{v2}$).\n*   The DC voltage at nodes X and Y is equal to the supply voltage $V_{out}$ (because the inductors $L_1$ act as DC shorts).\n*   The tuning voltage is $V_{cont}$.\n*   The voltage across the varactors is $V_{var} = V_{out} - V_{cont}$.\n\nBecause the varactor capacitance depends on the voltage across it, any noise on $V_{out}$ will modulate the varactor capacitance, thereby modulating the oscillation frequency. The sensitivity of the VCO frequency to the supply voltage is called the **pushing gain ($K_{push}$)**, typically measured in Hz/V.\n\n### 2. Relate Voltage Noise to Frequency Noise\nLet the LDO thermal noise voltage be $v_n(t)$, which has a Power Spectral Density (PSD) of $S_{th}$ (in $V^2/Hz$).\nThe instantaneous frequency deviation $\\Delta f(t)$ caused by this noise is:\n$$\\Delta f(t) = K_{push} \\cdot v_n(t)$$\n\n### 3. Relate Frequency Noise to Phase Noise\nPhase is the integral of angular frequency over time. The phase variation $\\phi(t)$ is:\n$$\\phi(t) = 2\\pi \\int \\Delta f(t) dt = 2\\pi K_{push} \\int v_n(t) dt$$\n\nIn the frequency domain, integration corresponds to dividing by $j\\omega_m$ (where $\\omega_m = 2\\pi f_m$, and $f_m$ is the offset frequency from the carrier).\n$$\\Phi(f_m) = \\frac{2\\pi K_{push}}{j 2\\pi f_m} V_n(f_m) = \\frac{K_{push}}{j f_m} V_n(f_m)$$\n\n### 4. Compute the Phase Noise Power Spectral Density\nTo find the phase noise PSD ($S_\\phi$), we square the magnitude of the transfer function and multiply it by the input noise PSD ($S_{th}$):\n$$S_\\phi(f_m) = \\left| \\frac{K_{push}}{j f_m} \\right|^2 S_{th}$$\n$$S_\\phi(f_m) = \\frac{K_{push}^2}{f_m^2} S_{th} \\quad [\\text{rad}^2/\\text{Hz}]$$\n\n### 5. Final Formula (Single-Sideband Phase Noise)\nIn RF engineering, phase noise is usually expressed as Single-Sideband (SSB) phase noise, denoted as $\\mathcal{L}(f_m)$. For small phase deviations, $\\mathcal{L}(f_m)$ is half of the double-sided phase noise PSD:\n$$\\mathcal{L}(f_m) = \\frac{1}{2} S_\\phi(f_m) = \\frac{K_{push}^2}{2 f_m^2} S_{th}$$\n\nExpressed in decibels relative to the carrier per hertz (dBc/Hz):\n$$\\mathcal{L}(f_m) = 10 \\log_{10} \\left( \\frac{K_{push}^2 \\cdot S_{th}}{2 f_m^2} \\right) \\quad [\\text{dBc/Hz}]$$\n\n**Summary of variables needed for the computation:**\n*   **$S_{th}$**: The given thermal noise PSD of the LDO ($V^2/Hz$).\n*   **$K_{push}$**: The supply pushing gain of the VCO (Hz/V), which must be found via simulation or measurement of this specific circuit.\n*   **$f_m$**: The offset frequency at which you are calculating the phase noise (Hz).",
        "format": "markdown",
        "sha256": "eb359cd0db88e07180eb61205a31f106909931c02bf46a5e9e704520871b48d0"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly uses supply pushing, converts the LDO noise through Kpush, and derives the expected 1/fm² SSB phase-noise relation. It identifies direct varactor coupling, but omits the explicit design insight that Kpush is closely related to KVCO and reducing KVCO reduces this noise conversion; calling the mechanism AM-to-PM is also imprecise.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2252,
        "output_tokens": 6829,
        "total_tokens": 9081,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5029,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 3260,
        "total_tokens": 4386,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2294,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, adding the capacitor **$C_T$** to the tail node (node P) generally **improves (reduces) the phase noise** of the oscillator.\n\nHere is a step-by-step explanation of why this happens:\n\n### 1. The Tail Node Oscillates at $2\\omega_0$\nIn a cross-coupled LC oscillator, the differential outputs (nodes X and Y) oscillate at the fundamental frequency, $\\omega_0$. Because the transistors $M_1$ and $M_2$ turn on and off alternately, the common-source node (node P) experiences a voltage fluctuation twice per cycle. Therefore, the voltage at the tail node oscillates at the second harmonic, **$2\\omega_0$**.\n\n### 2. Noise Mixing from the Tail Current Source\nThe tail current source ($I_{SS}$) is not ideal; it generates its own thermal noise. \n* The cross-coupled pair ($M_1$ and $M_2$) acts like a mixer. \n* Thermal noise from the tail current source at frequencies around **$2\\omega_0$** mixes with the fundamental switching frequency ($\\omega_0$) of the transistors.\n* This mixing process \"folds\" or translates the high-frequency noise down to $\\omega_0$ (since $2\\omega_0 - \\omega_0 = \\omega_0$). This noise appears directly around the carrier frequency, significantly degrading the phase noise.\n\n### 3. The Role of $C_T$ (Noise Filtering)\nBy adding a sufficiently large capacitor $C_T$ at the tail node:\n* **It creates an AC ground at high frequencies:** The impedance of the capacitor ($Z = 1 / j\\omega C$) becomes very low at high frequencies like $2\\omega_0$.\n* **It shorts the noise:** $C_T$ effectively provides a low-impedance path to ground for the high-frequency thermal noise generated by the $I_{SS}$ current source. \n* Because this $2\\omega_0$ noise is shunted to ground *before* it can enter the cross-coupled pair, it cannot mix down to the fundamental frequency. \n\n### Summary\nAdding $C_T$ acts as a bypass capacitor that filters out the high-frequency thermal noise (specifically around $2\\omega_0$) from the tail current source. By preventing this noise from mixing down to the oscillation frequency, **the overall phase noise of the VCO is reduced.**",
        "format": "markdown",
        "sha256": "636f6fb4cf15c95515ccb7a11864cf96a0af9e8fbbefd88563ec1e94ea829e9e"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives a monotonic phase-noise improvement based on filtering tail-node noise, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2200,
        "output_tokens": 4961,
        "total_tokens": 7161,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2401,
        "total_tokens": 3501,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1867,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on RF integrated circuit design principles, adding a large capacitor ($C_T$) to the tail node (node P) generally **degrades (increases) the phase noise** of the oscillator, particularly in the voltage-limited regime.\n\nHere is the step-by-step explanation of why this happens:\n\n### 1. The Dynamics of the Tail Node (Node P)\nIn a standard cross-coupled LC oscillator without $C_T$, the tail node P is not a true DC ground. Because the transistors $M_1$ and $M_2$ switch on and off, the current steering creates a voltage ripple at node P. This ripple occurs at **twice the fundamental frequency ($2\\omega_0$)**.\n*   When the tail node is allowed to swing freely at $2\\omega_0$, it helps keep the transistors $M_1$ and $M_2$ in the **saturation region** for a larger portion of the oscillation cycle. As the gate voltage swings high, the source voltage (node P) also rises slightly, preventing the gate-to-drain voltage from dropping too low.\n\n### 2. The Effect of Adding $C_T$ (The Problem)\nWhen you add a large capacitor $C_T$, you effectively create an **AC ground** at node P for high frequencies.\n*   Because node P is now pinned to a relatively constant DC voltage, it can no longer swing at $2\\omega_0$.\n*   When the voltage at node X or Y (the gates of $M_2$ and $M_1$) swings to its peak positive value, the source voltage at node P cannot rise to accommodate it.\n*   This results in a very large $V_{GS}$ and forces the active transistor deep into the **triode (linear) region** at the peaks of the oscillation cycle.\n\n### 3. Tank Loading and Phase Noise\nWhen a transistor enters the triode region, its channel resistance drops significantly.\n*   This low resistance appears in parallel with the LC tank.\n*   This effect is known as **tank loading**. It degrades (lowers) the effective Quality factor (Q) of the LC tank.\n*   According to Leeson's equation, phase noise is inversely proportional to $Q^2$. Therefore, lowering the Q of the tank directly **increases the phase noise**.\n\n### Summary: The Trade-off\nIt is worth noting *why* someone might be tempted to put $C_T$ there in the first place: A capacitor at the tail shorts high-frequency thermal noise (specifically at $2\\omega_0$) from the tail current source ($I_{SS}$) to ground, preventing it from mixing down into the tank as phase noise.\n\nHowever, in practical designs, the severe penalty of **tank loading** (caused by forcing the transistors into triode) almost always outweighs the benefit of filtering the tail noise. Therefore, the net result of adding $C_T$ is **worse phase noise**.\n\n*(Note: To get the best of both worlds, RF designers sometimes use a \"noise filter\" consisting of an inductor and capacitor in parallel at the tail, tuned to resonate exactly at $2\\omega_0$. This blocks the noise from $I_{SS}$ while still allowing node P to swing, keeping the transistors out of triode).*",
        "format": "markdown",
        "sha256": "e1ab16c403a6243ec3b19a6cfb1c19a68b721c6ccfbb1b45a04bf7ce2e508961"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the wrong monotonic conclusion and misses the class-C phase-noise improvement, but its triode-operation/tank-loading explanation invokes a relevant Razavi degradation mechanism, warranting partial credit.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2200,
        "output_tokens": 7403,
        "total_tokens": 9603,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 3397,
        "total_tokens": 4497,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, adding the capacitor **$C_T$** to the tail node (Node P) generally **improves (reduces) the phase noise** of the oscillator.\n\nHere is the step-by-step explanation of why this happens:\n\n### 1. The Tail Node Oscillates at $2\\omega_0$\nIn a cross-coupled LC oscillator, the transistors $M_1$ and $M_2$ turn on and off alternately at the fundamental frequency ($\\omega_0$). Because the tail node (P) sees the combined current and switching action of both transistors, the voltage at node P fluctuates at **twice the fundamental frequency ($2\\omega_0$)**.\n\n### 2. Noise Mixing from the Tail Current Source\nThe tail current source ($I_{SS}$) is not ideal; it generates its own thermal and flicker noise.\n*   Because the cross-coupled pair acts like a mixer, noise from the tail current source at frequencies around **$2\\omega_0$** mixes with the fundamental oscillation.\n*   This mixing process downconverts the $2\\omega_0$ noise directly to $\\omega_0$, where it appears as close-in **phase noise** around the carrier frequency.\n\n### 3. The Role of $C_T$ (High-Frequency Bypass)\nBy adding a sufficiently large capacitor $C_T$ at the tail node:\n*   **Shunting High-Frequency Noise:** $C_T$ acts as a short circuit to ground for high frequencies. It effectively shunts the thermal noise generated by $I_{SS}$ at $2\\omega_0$ to ground. Because this noise is filtered out before it can enter the switching transistors, it cannot mix down to the fundamental frequency, thereby reducing phase noise.\n*   **Smoothing the Tail Voltage:** $C_T$ acts as a bypass capacitor that smooths out the $2\\omega_0$ voltage ripple at node P. Without $C_T$, large voltage swings at the tail can push the current source transistor into the triode region or cause AM-to-PM (Amplitude Modulation to Phase Modulation) conversion, both of which degrade phase noise. $C_T$ stabilizes this node.\n\n**Summary:**\nAdding $C_T$ creates a low-impedance path to ground at $2\\omega_0$, preventing high-frequency noise from the tail current source from mixing into the LC tank and degrading the phase noise.",
        "format": "markdown",
        "sha256": "34d3e16c76d671fd34f2326ea0ce0738786ec3b95c169ecd93ceaa2b16ba9245"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives a monotonic phase-noise improvement from tail-node filtering, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2200,
        "output_tokens": 5361,
        "total_tokens": 7561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4055,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2191,
        "total_tokens": 3291,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1670,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is an estimation of its oscillation frequency:\n\n### 1. Circuit Identification\nThe circuit is a **Quadrature LC Voltage-Controlled Oscillator (QVCO)**. It consists of two identical LC oscillators (top and bottom) that are coupled together to produce outputs that are 90 degrees out of phase (in quadrature).\n\n### 2. Core Components\n*   **LC Tanks:** Each oscillator has an LC tank formed by the inductors (let's call their inductance $L$) connected to the top rail and the parasitic capacitances at the nodes $X_1, Y_1$ and $X_2, Y_2$. Let's denote the total equivalent capacitance at each of these nodes as $C$.\n*   **Cross-Coupled Pairs (Inner Transistors):** The inner pairs of transistors (with tail current $I_{SS}$) provide the negative resistance necessary to cancel out the losses in the LC tanks and sustain oscillation.\n*   **Coupling Pairs (Outer Transistors):** The outer pairs of transistors (with tail current $I_1$) inject current from one oscillator into the other. Notice the anti-symmetric connection: the top oscillator receives a \"positive\" coupling from the bottom, while the bottom receives a \"negative\" (cross-wired) coupling from the top. This specific arrangement forces the two oscillators to run 90° out of phase.\n\n### 3. Frequency Estimation\nThe primary oscillation frequency of this circuit is determined by the natural resonant frequency of its LC tanks.\n\nThe estimated oscillation frequency $f$ is:\n$$f \\approx \\frac{1}{2\\pi\\sqrt{LC}}$$\n\nWhere:\n*   **$L$** is the inductance of one of the inductor coils.\n*   **$C$** is the total parasitic capacitance at each node ($X_1, Y_1, X_2, Y_2$). This includes the gate-source, gate-drain, and drain-bulk capacitances of the connected transistors, as well as the parasitic capacitance of the inductor itself.\n\n**Note on Frequency Shift:**\nIn a parallel-coupled QVCO like this one, the coupling network actually introduces a phase shift that forces the circuit to oscillate slightly away from its natural resonant frequency $f_0$. The actual oscillation frequency will be shifted by an amount proportional to the coupling strength (determined by the current $I_1$). It typically oscillates at either $f_0 + \\Delta f$ or $f_0 - \\Delta f$, but $f \\approx \\frac{1}{2\\pi\\sqrt{LC}}$ remains the fundamental baseline estimate.",
        "format": "markdown",
        "sha256": "2a09470fbe72393d42996b029b95edfd43844975579bf4ce286a9e125e6f5146"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct tank-resonance frequency and recognizes a coupling-induced shift, but does not quantify that shift using the required dependence on coupling strength and Q (or equivalent current/transconductance ratios), so the oscillation-frequency estimate is incomplete.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2206,
        "output_tokens": 19919,
        "total_tokens": 22125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18688,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 10212,
        "total_tokens": 11315,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9659,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is an estimation of its oscillation frequency:\n\n### 1. Circuit Identification\nThe circuit is a **Quadrature Voltage-Controlled Oscillator (QVCO)**. It consists of two identical LC oscillators (top and bottom) that are coupled together.\n*   **Core Oscillators:** Each half uses a cross-coupled NMOS pair (biased by $I_{SS}$) to provide negative resistance, compensating for the losses in the LC tank to sustain oscillation.\n*   **Coupling:** The outer NMOS pairs (biased by $I_1$) inject current from one oscillator into the other. Notice that the coupling from the bottom to the top is \"crossed\" (left gate to right node, right gate to left node), while the coupling from the top to the bottom is \"straight\" (left gate to left node, right gate to right node). This anti-symmetric coupling forces the two oscillators to operate $90^\\circ$ out of phase (in quadrature).\n\n### 2. Oscillation Frequency Estimate\nTo a first order, the oscillation frequency is determined by the resonance of the LC tanks.\n\nLet:\n*   **$L$** be the inductance of each inductor connected to the top rail.\n*   **$C$** be the total equivalent parasitic capacitance at each output node ($X_1, Y_1, X_2, Y_2$). This includes the gate-source ($C_{gs}$), gate-drain ($C_{gd}$), and drain-bulk ($C_{db}$) capacitances of the transistors, as well as the parasitic capacitance of the inductors themselves.\n\nThe estimated oscillation frequency ($f_{osc}$) is the natural resonance frequency of this LC tank:\n\n$$f_{osc} \\approx \\frac{1}{2\\pi\\sqrt{LC}}$$\n\n*(or in angular frequency: $\\omega_{osc} \\approx \\frac{1}{\\sqrt{LC}}$)*\n\n### 3. Secondary Effects (Frequency Shift)\nWhile the formula above provides the primary estimate, it's worth noting that in a parallel-coupled QVCO like this, the coupling mechanism introduces a small shift from the natural resonance frequency.\n\nThe actual oscillation frequency will be slightly offset by a factor proportional to the strength of the coupling:\n$$\\omega_{osc} \\approx \\frac{1}{\\sqrt{LC}} \\pm \\frac{g_{mc}}{2C}$$\nWhere $g_{mc}$ is the transconductance of the coupling transistors (determined by the tail current $I_1$). Because $I_1$ is typically designed to be smaller than $I_{SS}$ to minimize phase noise degradation, this frequency shift is usually small, making $f_{osc} \\approx \\frac{1}{2\\pi\\sqrt{LC}}$ a very good estimate.",
        "format": "markdown",
        "sha256": "2be3a4066aaf1c3616ed878dbd55d1815ccda137de399c570ae7225601f190a5"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The tank-resonance estimate is correct, but the only coupling-shift expression given is \\(g_{mc}/(2C)\\). The required shift depends on coupling relative to the core (for example, \\((g_{mc}/g_{m1})\\omega_0/(2Q)\\)); the stated expression applies only at the edge-of-oscillation condition.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2206,
        "output_tokens": 17093,
        "total_tokens": 19299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15765,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 9660,
        "total_tokens": 10763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9073,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.1-pro-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a step-by-step estimation of the oscillation frequency:\n\n### 1. Identify the Circuit Topology\nThe circuit is a **Quadrature Voltage-Controlled Oscillator (QVCO)**. It consists of two identical LC oscillators that are coupled together to produce outputs that are $90^\\circ$ out of phase.\n\n*   **Top Oscillator:** Formed by the inductors at the top, the inner cross-coupled NMOS pair (biased by $I_{SS}$), and the output nodes $X_1$ and $Y_1$.\n*   **Bottom Oscillator:** Formed by the inductors at the bottom, the inner cross-coupled NMOS pair (biased by $I_{SS}$), and the output nodes $X_2$ and $Y_2$.\n*   **Coupling:** The outer NMOS pairs (biased by $I_1$) inject current from one oscillator into the other.\n    *   The bottom oscillator is *directly* coupled to the top oscillator (e.g., $X_1$ drives the left side, $Y_1$ drives the right side).\n    *   The top oscillator is *cross-coupled* to the bottom oscillator (notice the wires crossing in the middle: $X_2$ drives the right side, $Y_2$ drives the left side).\n    *   This anti-symmetric coupling forces the two oscillators to run in quadrature (a $90^\\circ$ phase difference).\n\n### 2. Determine the Frequency-Setting Components\nLike any LC oscillator, the primary oscillation frequency is determined by the resonant frequency of its tank circuit.\n*   **Inductance ($L$):** Provided by the spiral inductors connected to the top rail. Let's assume each inductor has an inductance $L$.\n*   **Capacitance ($C$):** Although no explicit capacitors are drawn, the circuit relies on the parasitic capacitances at the nodes $X_1, Y_1, X_2,$ and $Y_2$ to oscillate. This includes the gate-source, gate-drain, and drain-bulk capacitances of all the connected transistors, plus any wiring capacitance. Let's call the total effective capacitance at each node $C$.\n\n### 3. Estimate the Oscillation Frequency\nThe fundamental oscillation frequency of an LC tank is given by the resonance formula. While the coupling transistors (biased by $I_1$) will cause the actual frequency to shift slightly away from the natural resonance (a phenomenon known as frequency pulling), the best estimate for the center frequency is the natural resonant frequency of the LC tanks:\n\n$$f_{osc} \\approx \\frac{1}{2\\pi\\sqrt{LC}}$$\n\n*(where $L$ is the inductance of one of the coils and $C$ is the total parasitic capacitance at that node).*",
        "format": "markdown",
        "sha256": "db050bc2e0c248706f421a26d3ee2957fd69ca50f5af46f7354c57733bc759ed"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct tank-resonance estimate and notes that coupling shifts the frequency, but does not estimate that shift using the required coupling-dependent term (such as Δω ≈ αω₀/(2Q)).",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2206,
        "output_tokens": 19298,
        "total_tokens": 21504,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18074,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 9665,
        "total_tokens": 10768,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
