{
  "model_key": "gemini_36_flash",
  "display_name": "Gemini 3.6 Flash",
  "provider": "google",
  "evaluation_model_ids": [],
  "thinking_effort": "high",
  "configuration_note": "Gemini 3.6 Flash answered the 50 tasks in three rollouts through OpenRouter's chat completions route (google/gemini-3.6-flash) at reasoning effort high, the highest it offers. Requests set temperature to 0 and max_tokens to 65,536, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Gemini 3.6 Flash on 2026-11-10 ($0.75 input, $0.075 cached input, $3.75 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 111,
          "incorrect_count": 39,
          "partial_credit_count": 35,
          "zero_count": 4,
          "mean_score_0_to_4": 3.36,
          "score_percent": 84.0,
          "score_distribution": {
            "0": 4,
            "1": 17,
            "2": 11,
            "3": 7,
            "4": 111
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 111,
          "incorrect_count": 39,
          "partial_credit_count": 35,
          "zero_count": 4,
          "mean_score_0_to_4": 3.36,
          "score_percent": 84.0,
          "score_distribution": {
            "0": 4,
            "1": 17,
            "2": 11,
            "3": 7,
            "4": 111
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 80,
          "incorrect_count": 10,
          "partial_credit_count": 7,
          "zero_count": 3,
          "mean_score_0_to_4": 3.7111111111111112,
          "score_percent": 92.77777777777779,
          "score_distribution": {
            "0": 3,
            "1": 2,
            "2": 3,
            "3": 2,
            "4": 80
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 80,
          "incorrect_count": 10,
          "partial_credit_count": 7,
          "zero_count": 3,
          "mean_score_0_to_4": 3.7111111111111112,
          "score_percent": 92.77777777777779,
          "score_distribution": {
            "0": 3,
            "1": 2,
            "2": 3,
            "3": 2,
            "4": 80
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 31,
          "incorrect_count": 29,
          "partial_credit_count": 28,
          "zero_count": 1,
          "mean_score_0_to_4": 2.8333333333333335,
          "score_percent": 70.83333333333334,
          "score_distribution": {
            "0": 1,
            "1": 15,
            "2": 8,
            "3": 5,
            "4": 31
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 31,
          "incorrect_count": 29,
          "partial_credit_count": 28,
          "zero_count": 1,
          "mean_score_0_to_4": 2.8333333333333335,
          "score_percent": 70.83333333333334,
          "score_distribution": {
            "0": 1,
            "1": 15,
            "2": 8,
            "3": 5,
            "4": 31
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 38,
        "incorrect_count": 12,
        "partial_credit_count": 11,
        "zero_count": 1,
        "mean_score_0_to_4": 3.36,
        "score_percent": 84.0,
        "score_distribution": {
          "0": 1,
          "1": 7,
          "2": 3,
          "3": 1,
          "4": 38
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 37,
        "incorrect_count": 13,
        "partial_credit_count": 11,
        "zero_count": 2,
        "mean_score_0_to_4": 3.38,
        "score_percent": 84.5,
        "score_distribution": {
          "0": 2,
          "1": 4,
          "2": 4,
          "3": 3,
          "4": 37
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 36,
        "incorrect_count": 14,
        "partial_credit_count": 13,
        "zero_count": 1,
        "mean_score_0_to_4": 3.34,
        "score_percent": 83.5,
        "score_distribution": {
          "0": 1,
          "1": 6,
          "2": 4,
          "3": 3,
          "4": 36
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 0,
        "input_tokens": 152607,
        "output_tokens": 756492,
        "total_tokens": 909099
      },
      "known_totals": {
        "cached_input_tokens": 0,
        "input_tokens": 152607,
        "output_tokens": 756492,
        "total_tokens": 909099
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 27,
          "incorrect_count": 3,
          "partial_credit_count": 3,
          "zero_count": 0,
          "mean_score_0_to_4": 3.7666666666666666,
          "score_percent": 94.16666666666667,
          "score_distribution": {
            "1": 1,
            "2": 2,
            "4": 27
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 26,
          "incorrect_count": 4,
          "partial_credit_count": 2,
          "zero_count": 2,
          "mean_score_0_to_4": 3.6333333333333333,
          "score_percent": 90.83333333333333,
          "score_distribution": {
            "0": 2,
            "2": 1,
            "3": 1,
            "4": 26
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 27,
          "incorrect_count": 3,
          "partial_credit_count": 2,
          "zero_count": 1,
          "mean_score_0_to_4": 3.7333333333333334,
          "score_percent": 93.33333333333333,
          "score_distribution": {
            "0": 1,
            "1": 1,
            "3": 1,
            "4": 27
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 11,
          "incorrect_count": 9,
          "partial_credit_count": 8,
          "zero_count": 1,
          "mean_score_0_to_4": 2.75,
          "score_percent": 68.75,
          "score_distribution": {
            "0": 1,
            "1": 6,
            "2": 1,
            "3": 1,
            "4": 11
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 11,
          "incorrect_count": 9,
          "partial_credit_count": 9,
          "zero_count": 0,
          "mean_score_0_to_4": 3.0,
          "score_percent": 75.0,
          "score_distribution": {
            "1": 4,
            "2": 3,
            "3": 2,
            "4": 11
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 9,
          "incorrect_count": 11,
          "partial_credit_count": 11,
          "zero_count": 0,
          "mean_score_0_to_4": 2.75,
          "score_percent": 68.75,
          "score_distribution": {
            "1": 5,
            "2": 4,
            "3": 2,
            "4": 9
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET while keeping the bias current ($I_D$) or overdrive voltage ($V_{ov}$) constant, **its intrinsic gain doubles (increases by 6 dB)**.\n\nHere is the step-by-step mathematical explanation:\n\n---\n\n### 1. Definition of Intrinsic Gain\nThe intrinsic gain ($A_{v0}$) of a MOSFET is the maximum possible voltage gain the transistor can achieve on its own. It is given by:\n\n$$A_{v0} = g_m \\cdot r_o$$\n\nWhere:\n*   $g_m$ is the transconductance.\n*   $r_o$ is the output resistance.\n\n---\n\n### 2. Effect on Transconductance ($g_m$)\nThe transconductance equation (in saturation) is:\n\n$$g_m = \\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) I_D}$$\n\n*   Since both $W$ and $L$ are doubled, the aspect ratio $\\frac{W}{L}$ becomes $\\frac{2W}{2L} = \\frac{W}{L}$.\n*   Because the aspect ratio remains unchanged, **$g_m$ remains unchanged** (assuming constant $I_D$).\n\n$$g_m' = g_m$$\n\n---\n\n### 3. Effect on Output Resistance ($r_o$)\nThe output resistance is inversely proportional to the channel-length modulation parameter ($\\lambda$), which is inversely proportional to length ($L$):\n\n$$r_o = \\frac{1}{\\lambda I_D} = \\frac{V_A' \\cdot L}{I_D}$$\n\nWhere $V_A'$ is the Early voltage per unit length.\n\n*   Since $L$ is doubled ($L' = 2L$), the output resistance **doubles**:\n\n$$r_o' = 2 r_o$$\n\n---\n\n### 4. Overall Effect on Intrinsic Gain\nCombining the two results:\n\n$$A_{v0}' = g_m' \\cdot r_o' = g_m \\cdot (2 r_o) = 2 (g_m \\cdot r_o) = 2 A_{v0}$$\n\n*   **Linear Scale:** The gain is **2 times** larger.\n*   **Decibel Scale:** The gain increases by **$+6\\text{ dB}$** ($20 \\log_{10}(2) \\approx 6.02\\text{ dB}$).\n\n---\n\n### The Trade-off (Speed vs. Gain)\nWhile doubling $W$ and $L$ gives you double the intrinsic gain, it comes at a major cost to **speed**:\n1. Gate capacitance ($C_{gg} \\propto W \\cdot L$) increases by a factor of **4**.\n2. Higher capacitance drastically lowers the transit frequency ($f_T$), slowing down the transistor.",
        "format": "markdown",
        "sha256": "961fb9300dccdff287a395173cf5fb544b53442fbd8f17c71443487587799f32"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions leaves W/L and gm approximately unchanged, while the longer channel roughly doubles ro, so intrinsic gain doubles (about +6 dB). The added speed trade-off does not undermine the answer.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2215,
        "total_tokens": 2234,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2215,
        "total_tokens": 2234,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and width ($W$) of a MOSFET, its **intrinsic gain doubles** (increases by a factor of 2, or **+6 dB**).\n\nHere is the step-by-step physical and mathematical explanation for why this happens:\n\n---\n\n### 1. The Formula for Intrinsic Gain\nThe intrinsic gain ($A_{v0}$) of a MOSFET is the maximum achievable voltage gain of a single transistor, defined as:\n$$A_{v0} = g_m \\cdot r_o$$\n\nWhere:\n* $g_m$ is the transconductance.\n* $r_o$ is the output resistance.\n\n---\n\n### 2. Effect on Transconductance ($g_m$)\nThe transconductance in saturation is given by:\n$$g_m = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_{GS} - V_{th})$$\n\n* If you double both $W$ and $L$ ($W \\to 2W$ and $L \\to 2L$), the aspect ratio $\\frac{W}{L}$ remains unchanged:\n$$\\frac{2W}{2L} = \\frac{W}{L}$$\n* Assuming the bias voltage ($V_{GS}$) and drain current ($I_D$) remain constant, **$g_m$ remains unchanged**.\n\n---\n\n### 3. Effect on Output Resistance ($r_o$)\nThe output resistance is inversely proportional to the channel-length modulation parameter ($\\lambda$):\n$$r_o = \\frac{1}{\\lambda I_D} = \\frac{V_A}{I_D}$$\n\n* The Early Voltage ($V_A$) is directly proportional to the channel length ($L$):\n$$V_A = V_A' \\cdot L$$ (where $V_A'$ is a technology-dependent constant).\n* Since $L$ is doubled ($L \\to 2L$), the Early Voltage $V_A$ doubles.\n* With $I_D$ remaining constant, **$r_o$ doubles**:\n$$r_o \\to 2 \\cdot r_o$$\n\n---\n\n### 4. Combining the Results\nNow, calculate the new intrinsic gain:\n$$A_{v0, \\text{new}} = g_m \\cdot (2 r_o) = 2 (g_m \\cdot r_o) = 2 A_{v0, \\text{old}}$$\n\n---\n\n### Summary of Trade-offs\nWhile doubling $W$ and $L$ doubles your voltage gain, it comes with important trade-offs:\n\n1. **Lower Speed / Bandwidth:** The gate capacitance ($C_{gg} \\approx W \\cdot L \\cdot C_{ox}$) increases by a factor of **4** because the total gate area ($W \\times L$) quadruples. This severely reduces the unity-gain frequency ($f_T$).\n2. **Larger Area:** The physical silicon area required for the transistor increases by **$4\\times$**.",
        "format": "markdown",
        "sha256": "7593235f0ae8c9f63a31e33a03d4a2168bb946e3b500407f0395a9b99ba37fde"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with constant overdrive, doubling both dimensions leaves gm and ID approximately unchanged while ro doubles. The stated assumptions are consistent with the golden solution.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2162,
        "total_tokens": 2181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1501,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2162,
        "total_tokens": 2181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1501,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming a constant bias current ($I_D$), doubling both the length ($L$) and width ($W$) of a MOSFET **doubles its intrinsic gain** (an increase of **6 dB** or a factor of 2).\n\nHere is the step-by-step breakdown of why this happens:\n\n---\n\n### 1. Definition of Intrinsic Gain\nThe intrinsic gain ($A_v$) of a MOSFET is the maximum voltage gain achievable by a single transistor (assuming an ideal current source load):\n$$|A_v| = g_m \\cdot r_o$$\n\nWhere:\n*   $g_m$ is the transconductance.\n*   $r_o$ is the output resistance.\n\n---\n\n### 2. Aspect Ratio Remains Constant\nWhen you double both width ($W \\to 2W$) and length ($L \\to 2L$), the **aspect ratio** ($W/L$) does not change:\n$$\\left(\\frac{W}{L}\\right)_{\\text{new}} = \\frac{2W}{2L} = \\frac{W}{L}$$\n\n---\n\n### 3. Effect on Transconductance ($g_m$)\nThe transconductance equation for a MOSFET in saturation biased with a fixed current $I_D$ is:\n$$g_m = \\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) I_D}$$\n\nSince the ratio $W/L$ and the bias current $I_D$ both remain constant, **$g_m$ stays the same**:\n$$g_m' = g_m$$\n\n---\n\n### 4. Effect on Output Resistance ($r_o$)\nThe output resistance is caused by Channel Length Modulation ($\\lambda$) and is given by:\n$$r_o = \\frac{1}{\\lambda I_D} = \\frac{V_A' \\cdot L}{I_D}$$\n\nWhere $V_A'$ is the Early voltage per unit length. Because output resistance is directly proportional to channel length $L$:\n*   Doubling $L$ cuts channel length modulation in half ($\\lambda' = \\frac{\\lambda}{2}$).\n*   Therefore, **$r_o$ doubles**:\n$$r_o' = 2 r_o$$\n\n---\n\n### 5. Net Effect on Intrinsic Gain\nCombining the results for $g_m$ and $r_o$:\n$$|A_v'| = g_m' \\cdot r_o' = g_m \\cdot (2 r_o) = 2 \\cdot (g_m r_o) = 2 |A_v|$$\n\n---\n\n### Summary of Trade-offs\nWhile doubling $W$ and $L$ **doubles the intrinsic gain**, it comes with engineering trade-offs:\n*   **Pros:** Higher DC gain (+6 dB) and better device matching.\n*   **Cons:** The total gate area ($W \\times L$) increases by a factor of 4 ($2W \\times 2L = 4WL$), which **quadruples the parasitic capacitance**. This significantly reduces the speed/bandwidth (transit frequency, $f_T$) of the transistor.",
        "format": "markdown",
        "sha256": "fbf6059073f830bfbdcaea5e057f833c2a4955d14efd454e257913b3d8566591"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain doubles: with fixed current and unchanged W/L, gm remains approximately constant while ro doubles as channel-length modulation decreases. The stated bias assumption is explicit; the extra parasitic-capacitance discussion is secondary.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2334,
        "total_tokens": 2353,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2334,
        "total_tokens": 2353,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct.** \n\nFor a fixed transistor size (width $W$ and length $L$), the transconductance ($g_m$) of a MOSFET in the saturation region increases linearly as the overdrive voltage ($V_{ov} = V_{GS} - V_{th}$) increases.\n\n### The Math Behind It:\nThe small-signal transconductance ($g_m$) is defined as the change in drain current relative to the change in gate-to-source voltage:\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}}$$\n\nUsing the standard square-law model for a MOSFET in saturation:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) V_{ov}^2$$\n\nTaking the derivative gives:\n$$g_m = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) V_{ov}$$\n\nAs you can see, **$g_m$ is directly proportional to $V_{ov}$**. As $V_{ov}$ increases, $g_m$ goes up.\n\n---\n\n### Important Context (Why Student B might be confused):\n\nThere is **one specific design scenario** where Student B’s logic applies, which often causes confusion in analog circuit design:\n\n* **If the Drain Current ($I_D$) is kept fixed** (for example, by a constant current source) and you increase $V_{ov}$ by making the transistor smaller (reducing $W/L$), then transconductance actually **decreases**. \n* This is shown by the alternative formula: \n  $$g_m = \\frac{2I_D}{V_{ov}}$$\n\nHowever, in a standard scenario where you simply apply a higher gate voltage to a given transistor, **Student A is unequivocally correct.**",
        "format": "markdown",
        "sha256": "5bd438386bf88699cd56c338f61bf4977d3539c1a322da20a47a7ede757cfcd2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed transistor size and derives the linear increase in gm with Vov. It also accurately explains Student B’s result for fixed ID.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 1796,
        "total_tokens": 1826,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1397,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 1796,
        "total_tokens": 1826,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1397,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct.** \n\nUnder standard operating conditions in saturation, the transconductance ($g_m$) of a MOSFET increases as the overdrive voltage ($V_{OV} = V_{GS} - V_{TH}$) increases.\n\n---\n\n### **Mathematical Explanation**\n\nFor a MOSFET operating in the saturation region, the drain current ($I_D$) is given by:\n\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2 = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} V_{OV}^2$$\n\nTransconductance ($g_m$) is defined as the change in drain current relative to the change in gate-to-source voltage:\n\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}}$$\n\nTaking the derivative yields:\n\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH}) = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$$\n\nWhere:\n* $\\mu_n$ is the electron mobility\n* $C_{ox}$ is the oxide capacitance per unit area\n* $W/L$ is the transistor's aspect ratio (width over length)\n* $V_{OV}$ is the overdrive voltage\n\nAs seen in this equation, for a fixed transistor size ($W/L$), **$g_m$ is directly proportional to $V_{OV}$**. Therefore, increasing the overdrive voltage increases the transconductance.\n\n---\n\n### **Nuance / Edge Cases (For Advanced Context)**\n\n* **Constant Current Assumption:** If you hold the **drain current ($I_D$) constant** instead of keeping the transistor geometry fixed, the equation becomes $g_m = \\frac{2I_D}{V_{OV}}$. In *this specific design scenario* (where you decrease $W/L$ to keep $I_D$ constant while raising $V_{OV}$), $g_m$ would go down. However, strictly speaking as a property of a given device, $g_m$ increases with $V_{OV}$.\n* **Short-Channel Effects:** In modern sub-micron MOSFETs, high overdrive voltages lead to **velocity saturation** and **mobility degradation**. In these cases, $g_m$ eventually plateaus (levels off) rather than continuing to grow linearly, but it still does not decrease under normal operation.",
        "format": "markdown",
        "sha256": "ed02726f3894b9aa8e4d75ea7526b52f4f9291264a411bfd09ad254771245ade"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A for a fixed transistor size and derives that gm is proportional to VOV. It also correctly distinguishes the fixed-ID case where gm decreases; the short-channel aside is secondary.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 1869,
        "total_tokens": 1899,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 1869,
        "total_tokens": 1899,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct.** \n\n### Explanation:\n\nIn the saturation region of a MOSFET (assuming the standard long-channel model), the transconductance ($g_m$) is given by the formula:\n\n$$g_m = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_{GS} - V_{th})$$\n\nSince the overdrive voltage is defined as $V_{OV} = V_{GS} - V_{th}$, the equation simplifies to:\n\n$$g_m = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) V_{OV}$$\n\nWhere:\n* $\\mu_n$ is the electron mobility\n* $C_{ox}$ is the oxide capacitance per unit area\n* $W/L$ is the transistor's aspect ratio (width/length)\n* $V_{OV}$ is the overdrive voltage\n\nAs you can see from this equation, **$g_m$ is directly proportional to $V_{OV}$**. Therefore, for a given transistor, as the overdrive voltage increases, the transconductance **increases** (goes up).\n\n---\n\n### *A Brief Nuance (Context-Dependent Edge Case):*\n* If you hold the **transistor size ($W/L$) constant**, increasing $V_{OV}$ **increases** $g_m$ (Student A is correct).\n* *Only* in the specific circuit design scenario where the **drain current ($I_D$) is kept fixed** and you change the transistor dimensions to increase $V_{OV}$, using the alternative formula $g_m = \\frac{2I_D}{V_{OV}}$ would cause $g_m$ to go down. However, in standard device operation context, Student A's statement is the accepted correct principle.",
        "format": "markdown",
        "sha256": "6bd16e7869cbdf0e5a1ad53b19f239379fdabb70607ce69e4d993d5a99543542"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed transistor size and explains that gm is proportional to VOV. It also accurately notes the distinct fixed-ID case where gm decreases.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 1617,
        "total_tokens": 1647,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1231,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 1617,
        "total_tokens": 1647,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1231,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, topologically and mathematically, the low-frequency and high-frequency small-signal models of a PMOS device are identical to those of an NMOS device.**\n\nHowever, while the **structure** of the model is the same, the **numerical values** of the parameters (and the underlying DC bias conditions) are different.\n\n---\n\n### 1. Why Are the Models Identical?\n\nSmall-signal analysis looks at tiny variations ($\\Delta V, \\Delta I$) around a DC operating point (Q-point). Because it deals strictly with linear variations, the polarities of DC voltages drop out of the small-signal equations.\n\nFor both NMOS and PMOS, the fundamental small-signal drain current equation is:\n\n$$i_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}$$\n\nWhere:\n*   **$i_d$** is the small-signal current entering the Drain terminal.\n*   **$v_{gs}$** is the small-signal voltage between Gate and Source ($v_g - v_s$).\n*   **$v_{ds}$** is the small-signal voltage between Drain and Source ($v_d - v_s$).\n*   **$g_m$** is the transconductance (always a positive value).\n*   **$r_o$** is the output resistance (always a positive value).\n\n#### Mathematical proof of identical direction:\n* **NMOS:** Making $V_{GS}$ more positive increases current flowing from Drain to Source. Thus, $\\frac{\\partial I_D}{\\partial V_{GS}} = g_m > 0$.\n* **PMOS:** A PMOS normally conducts from Source to Drain. Making $V_{GS}$ *more positive* (less negative) **decreases** the magnitude of the PMOS current. Decreasing current flowing from Source-to-Drain is physically identical to **increasing** current flowing from Drain-to-Source. Therefore, $\\frac{\\partial I_D}{\\partial V_{GS}} = g_m > 0$ for PMOS as well!\n\nBecause of this, the controlled current source $g_m v_{gs}$ points from **Drain to Source** in the small-signal model for **both** NMOS and PMOS.\n\n---\n\n### 2. The Standard Small-Signal Circuit\n\nWhether you are drawing an NMOS or a PMOS, the standard low-frequency model looks like this:\n\n```text\n       Gate (G)                Drain (D)\n          o-----------------------o\n                                  |\n                                 +|+\n                                (   )  g_m * v_gs  (Current flows D -> S)\n                                ( | )\n                                 +v+\n                                  |\n                                  +--------+\n                                  |        |\n                                 [ ] r_o  [ ]  g_mb * v_bs (body effect, if any)\n                                 [ ]      [ ]\n                                  |        |\n          o-----------------------+--------+\n      Source (S)\n```\n\n*(Note: High-frequency models for both include the exact same parasitic capacitances: $C_{gs}$, $C_{gd}$, and $C_{db}$.)*\n\n---\n\n### 3. Key Differences to Keep in Mind\n\nEven though the schematic representation is identical, practical differences exist:\n\n#### A. Component Values (Physical Performance)\nBecause electrons have higher mobility than holes ($\\mu_n \\approx 2 \\text{ to } 3 \\times \\mu_p$):\n*   For the same physical size ($W/L$) and bias current ($I_D$), an **NMOS has a larger transconductance ($g_m$)** than a PMOS.\n*   To get equal $g_m$ performance, a PMOS transistor must be designed physically wider (larger $W$) than an NMOS transistor.\n\n#### B. Schematic Drawing Conventions (Aesthetics vs. Reality)\n*   **Textbook Preference:** To make DC circuit diagrams easier to read, designers often draw PMOS devices with the **Source at the top** (connected to $V_{DD}$) and Drain at the bottom. \n*   Because of this, some textbooks define PMOS parameters using $v_{sg}$ (Source-to-Gate) instead of $v_{gs}$, drawing the current source pointing from Source to Drain with a value of $g_m v_{sg}$.\n*   **Crucial Note:** $g_m v_{sg}$ (pointing Source to Drain) is mathematically **100% equivalent** to $g_m v_{gs}$ (pointing Drain to Source). Both give the exact same mathematical results in circuit analysis.\n\n#### C. DC Bias Conditions (Setting up the Model)\nBefore using the small-signal model, you must calculate $g_m$ and $r_o$ from the DC bias state:\n*   **NMOS DC Condition:** $V_{GS} > V_{TH,n}$ and $V_{DS} > V_{GS} - V_{TH,n}$\n*   **PMOS DC Condition:** $V_{GS} < V_{TH,p}$ (negative) and $V_{DS} < V_{GS} - V_{TH,p}$ (more negative)\n\n### Summary\nThe small-signal **equivalent circuit model is identical** for both NMOS and PMOS devices. You do not need to flip current sources or change signs when transitioning an AC schematic from NMOS to PMOS, provided you stick to standard node definitions ($v_{gs}$, $v_{ds}$, and $i_d$).",
        "format": "markdown",
        "sha256": "44fefec323fa16f45e1c0ed89c3d0605b2cff7726edacf38ffc798269a62c6b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model; its current and voltage conventions are consistent with that conclusion.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2888,
        "total_tokens": 2909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1686,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2888,
        "total_tokens": 2909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1686,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the small-signal model of a PMOS device is structurally identical to that of an NMOS device.** \n\nEven though NMOS and PMOS devices have opposite DC biasing requirements, opposite threshold voltage signs, and opposite DC current flow directions, **their linear small-signal equivalent circuits are exact duplicates.**\n\n---\n\n### Why Are They Identical? (The Math Behind It)\n\nSmall-signal analysis models how a small *change* in voltage causes a small *change* in current around a DC operating point:\n\n1. **For an NMOS:**\n   * Increasing Gate voltage ($v_g \\uparrow$) increases $v_{gs}$.\n   * This increases current flowing from Drain to Source ($i_{ds} \\uparrow$).\n   * Small-signal equation: **$i_{ds} = g_m v_{gs}$** (current flows from Drain to Source).\n\n2. **For a PMOS:**\n   * DC current flows from Source to Drain ($I_{SD}$).\n   * Increasing Gate voltage ($v_g \\uparrow$) makes $v_{sg}$ *smaller* ($v_{sg} = v_s - v_g$).\n   * A smaller $v_{sg}$ *decreases* the current flowing from Source to Drain ($i_{sd} \\downarrow$).\n   * Decreasing current flowing from Source to Drain is mathematically identical to **increasing current flowing from Drain to Source**.\n   * Small-signal equation: **$i_{ds} = g_m v_{gs}$** (current flows from Drain to Source).\n\nBecause the double-negative cancels out, the exact same small-signal model works for both devices without changing any arrow directions or signs.\n\n---\n\n### The Universal Low-Frequency Small-Signal Model\n\nFor both NMOS and PMOS, the low-frequency model consists of:\n\n* **Gate Terminal (G):** Modeled as an open circuit (infinite input impedance at low frequencies).\n* **Dependent Current Source:** Placed between Drain and Source, pointing **from Drain to Source**, with a magnitude of **$g_m v_{gs}$** (where $v_{gs} = v_g - v_s$).\n* **Output Resistance ($r_o$):** Placed in parallel with the current source between Drain and Source, representing channel-length modulation.\n* **Body Effect ($g_{mb}$):** If the body is not connected to the source, a second dependent current source $g_{mb} v_{bs}$ is added in parallel, pointing from Drain to Source.\n\n---\n\n### What *Is* Different Between NMOS and PMOS?\n\nWhile the **schematic/diagram** of the small-signal model is identical, the **numerical values** of the parameters differ due to physical material properties:\n\n1. **Transconductance ($g_m$):** \n   * Electron mobility ($\\mu_n$) in silicon is roughly 2 to 3 times higher than hole mobility ($\\mu_p$). \n   * Therefore, for the same device size ($W/L$) and bias current ($I_D$), an NMOS will have a higher $g_m$ than a PMOS:\n     $$g_m = \\sqrt{2 \\mu C_{ox} \\frac{W}{L} I_D}$$\n\n2. **Output Resistance ($r_o$):** \n   * Channel-length modulation parameters ($\\lambda$) differ between n-type and p-type silicon, meaning $r_o = \\frac{1}{\\lambda I_D}$ will differ numerically.\n\n3. **Parasitic Capacitances (High Frequency):**\n   * High-frequency models for both include $C_{gs}$, $C_{gd}$, and $C_{db}$. The topology remains identical for PMOS and NMOS, but PMOS devices usually require larger physical widths ($W$) to match NMOS performance, resulting in larger parasitic capacitances.\n\n### Summary Rule of Thumb for Circuit Analysis\nWhen analyzing an AC small-signal circuit:\n1. Replace DC voltage sources with AC ground.\n2. Replace DC current sources with AC open circuits.\n3. Replace **both** NMOS and PMOS transistors with the exact same 3-terminal model (Gate, Drain, Source) with the current source pointing **from Drain to Source**.",
        "format": "markdown",
        "sha256": "5d718992a6e65142e9c48e9e44340c8c40b144c4a01f14ab5c3829c8af00dfb6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model is the same in form as the NMOS model, which earns full credit under the golden rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2755,
        "total_tokens": 2776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2755,
        "total_tokens": 2776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the small-signal model of a PMOS transistor is structurally identical to that of an NMOS transistor.** \n\nWhen conducting small-signal (AC) analysis, both devices use the exact same equivalent circuit topology, current source directions, and parasitic elements. \n\nHowever, while the **schematic representation is identical**, there are important differences in **parameter values** and **large-signal (DC) biasing conditions**.\n\n---\n\n### 1. The Small-Signal Circuit Representation\n\nFor both NMOS and PMOS, the basic low-frequency small-signal model consists of:\n\n*   **Gate-to-Source Voltage ($v_{gs}$):** The controlling small-signal voltage across the gate and source terminals.\n*   **Transconductance Current Source ($g_m v_{gs}$):** A dependent current source pointing **from Drain to Source**.\n*   **Output Resistance ($r_o$):** Placed in parallel with the current source between the Drain and Source.\n\n```\n       Gate (G) o------------------+\n                                   |\n                                 + |\n                                  v_gs\n                                 - |\n       Source (S) o----------------+--------o Source (S)\n                                   |        |\n                                   |        |\n                                ( | )      [ ]\n                        g_m*v_gs  | v       [ ] r_o\n                                   |        |\n                                   |        |\n       Drain (D) o-----------------+--------o Drain (D)\n```\n\n#### Why is the current direction the same?\nPeople often assume the current source for a PMOS should point in the opposite direction (Source to Drain). However, mathematically, it points from Drain to Source for both:\n* **NMOS:** Increasing $v_g$ ($v_{gs} > 0$) increases the current flowing from Drain to Source ($i_{ds} > 0$).\n* **PMOS:** Increasing $v_g$ ($v_{gs} > 0$) makes the gate less negative relative to the source, which *decreases* the current flowing from Source to Drain. A *decrease* in Source-to-Drain current is mathematically equivalent to an *increase* in Drain-to-Source current ($i_{ds} > 0$).\n\nTherefore, the equation $i_{ds} = g_m v_{gs}$ holds true for **both** NMOS and PMOS without changing any signs in the model.\n\n---\n\n### 2. High-Frequency Model\nAt high frequencies, the parasitic capacitances ($C_{gs}$, $C_{gd}$, $C_{gb}$, $C_{db}$, $C_{sb}$) are added to the model. Their placement in the schematic is **identical** for both PMOS and NMOS.\n\n---\n\n### 3. Key Differences to Keep in Mind\n\nEven though the small-signal *schematic* is identical, you must account for the following physical and DC differences when solving circuits:\n\n| Feature | NMOS | PMOS |\n| :--- | :--- | :--- |\n| **Carrier Mobility ($\\mu$)** | Higher ($\\mu_n \\approx 300\\text{--}500 \\text{ cm}^2/\\text{V}\\cdot\\text{s}$) | Lower ($\\mu_p \\approx 100\\text{--}200 \\text{ cm}^2/\\text{V}\\cdot\\text{s}$) |\n| **Transconductance ($g_m$)** | Larger for the same size $(W/L)$ and DC current | Smaller ($\\approx \\frac{1}{2}$ to $\\frac{1}{3}$ of NMOS) for the same size |\n| **DC Bias Conditions** | $V_{GS} > V_{THn}$, $V_{DS} > 0$ | $V_{SG} > |V_{THp}|$, $V_{SD} > 0$ (or $V_{GS} < 0, V_{DS} < 0$) |\n| **Body Connection** | Usually connected to **GND** (lowest potential) | Usually connected to **$V_{DD}$** (highest potential) |\n\n### Summary\nTo analyze a PMOS AC circuit:\n1. Perform **DC analysis** using PMOS-specific equations to find $I_D$.\n2. Calculate the small-signal parameters ($g_m = \\sqrt{2 \\mu_p C_{ox} \\frac{W}{L} I_D}$ and $r_o = \\frac{1}{\\lambda I_D}$).\n3. Replace the PMOS with the **standard MOSFET small-signal model** (the exact same model used for an NMOS) and perform your AC analysis.",
        "format": "markdown",
        "sha256": "4c570df1818e25fe5afd6a429ba99f361440cd0e40cafb5fcd6d13d5e87c6101"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model is structurally the same as the NMOS model, which earns full credit under the golden solution's explicit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2596,
        "total_tokens": 2617,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1583,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2596,
        "total_tokens": 2617,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1583,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, transistor $M_1$ is an **NMOS transistor** connected in a **diode-connected configuration** (gate tied to drain). \n\n---\n\n### **1. Circuit Analysis**\n\n- **Gate Voltage:** $V_G = V_X$\n- **Drain Voltage:** $V_D = V_X$\n- **Source Voltage:** $V_S = 0\\text{ V}$ (ground)\n- **Gate-to-Source Voltage:** $V_{GS} = V_X - 0 = V_X$\n- **Drain-to-Source Voltage:** $V_{DS} = V_X - 0 = V_X$\n\nSince the gate is connected directly to the drain ($V_{GS} = V_{DS}$), whenever the transistor turns ON ($V_{GS} > V_{TH}$), the condition for saturation:\n$$V_{DS} \\ge V_{GS} - V_{TH} \\implies V_X \\ge V_X - V_{TH}$$\nis **always satisfied** because $V_{TH} > 0$. Therefore, $M_1$ can only operate in either **Cutoff** or **Saturation** (it never enters the triode region).\n\n---\n\n### **2. Operating Regions and Equations**\n\n1. **Cutoff Region ($V_X \\le V_{TH}$):**\n   - Since $V_{GS} \\le V_{TH}$, the transistor is **OFF**.\n   - Assuming zero gate current ($I_G = 0$):\n     $$I_X = 0$$\n\n2. **Saturation Region ($V_X > V_{TH}$):**\n   - The transistor turns **ON** and operates in **saturation**.\n   - Neglecting channel-length modulation ($\\lambda = 0$):\n     $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n   - Including channel-length modulation ($\\lambda > 0$):\n     $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2 (1 + \\lambda V_X)$$\n\n---\n\n### **3. Characteristics of the Sketch ($I_X$ vs. $V_X$)**\n\n- **For $V_X < V_{TH}$:** $I_X$ stays flat at **$0\\text{ A}$** along the horizontal axis (including negative $V_X$).\n- **At $V_X = V_{TH}$:** $I_X$ begins to rise smoothly from zero (the threshold point).\n- **For $V_X > V_{TH}$:** $I_X$ increases **quadratically (parabolically)** upward as $V_X$ increases.\n\n---\n\n### **4. Visual Plot (ASCII Representation)**\n\n```\n        IX\n        ^\n        |             / (Parabolic curve)\n        |            /\n        |           /\n        |          /\n        |        .'\n        |      .' \n  ------|----+'-------------------> VX\n  0     |   VTH\n```\n\n### **Summary Table**\n\n| Range of $V_X$ | Transistor State | Current $I_X$ | Curve Shape |\n| :--- | :--- | :--- | :--- |\n| $V_X \\le V_{TH}$ | Cutoff (OFF) | $I_X = 0$ | Zero horizontal line |\n| $V_X > V_{TH}$ | Saturation (ON) | $I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2$ | Quadratic curve opening upwards |",
        "format": "markdown",
        "sha256": "75a4d540d976e39941f651ed2cd632c6a411fe2418421c15273738562383787f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, zero current up to threshold, and a quadratic rise above threshold. The inaccurate claim about negative VX concerns a secondary region and does not change the essential answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3071,
        "total_tokens": 4187,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2225,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3071,
        "total_tokens": 4187,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2225,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine and sketch the relationship between $I_X$ and $V_X$, we analyze the operating regions of the **diode-connected NMOS transistor** ($M_1$).\n\n---\n\n### **1. Circuit Analysis**\n\nFrom the circuit diagram:\n* **Source Voltage:** $V_S = 0\\text{ V}$ (ground)\n* **Gate Voltage:** $V_G = V_X$\n* **Drain Voltage:** $V_D = V_X$\n\nTherefore:\n* **Gate-to-Source Voltage:** $V_{GS} = V_G - V_S = V_X$\n* **Drain-to-Source Voltage:** $V_{DS} = V_D - V_S = V_X$\n\n---\n\n### **2. Operating Regions**\n\n#### **Case 1: $V_X \\le V_{TH}$ (Cutoff Region)**\n* Since $V_{GS} = V_X \\le V_{TH}$ (where $V_{TH}$ is the threshold voltage of the NMOS transistor), the channel is not formed.\n* The transistor is **OFF**.\n* Assuming an ideal MOSFET with zero gate leakage:\n  $$I_X = I_D = 0$$\n\n---\n\n#### **Case 2: $V_X > V_{TH}$ (Saturation Region)**\n* Since $V_{GS} = V_X > V_{TH}$, the transistor turns **ON**.\n* To check the region of operation:\n  $$V_{DS} \\ge V_{GS} - V_{TH} \\implies V_X \\ge V_X - V_{TH}$$\n  Since $V_{TH} > 0$, this condition is **always satisfied** whenever $V_X > V_{TH}$.\n* Thus, the transistor $M_1$ **always operates in the saturation region** for $V_X > V_{TH}$.\n\nUsing the square-law saturation current equation (ignoring channel-length modulation $\\lambda = 0$):\n$$I_X = I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_X - V_{TH})^2$$\n\n*(If channel-length modulation $\\lambda > 0$ is included: $I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2 (1 + \\lambda V_X)$)*\n\n---\n\n### **3. Characteristics of the $I_X$ vs. $V_X$ Sketch**\n\n1. **For $V_X \\le V_{TH}$:** $I_X = 0\\text{ A}$ (the curve lies flat on the horizontal axis).\n2. **At $V_X = V_{TH}$:** The transistor turns ON (knee point).\n3. **For $V_X > V_{TH}$:** $I_X$ increases **quadratically (parabolically)** with respect to $V_X$.\n\n---\n\n### **4. Sketch of $I_X$ versus $V_X$**\n\n```text\n         IX ^\n            |\n            |              / (Quadratic Curve)\n            |             / \n            |            /  Ix = 1/2 * μn * Cox * (W/L) * (Vx - Vth)^2\n            |           /\n            |          /\n            |  _______/\n------------+---------+-------------------> Vx\n            0        Vth\n```",
        "format": "markdown",
        "sha256": "f6d87795c1a78695e24d1f89ba5d9bdba43e2ea3244b2ebfbd71428eed0817fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current up to threshold and a quadratic rise above threshold, and correctly notes saturation. The optional channel-length-modulation expression does not affect the score.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2711,
        "total_tokens": 3827,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1929,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2711,
        "total_tokens": 3827,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1929,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine and sketch the relationship between **$I_X$** and **$V_X$**, we analyze the operating regions of the NMOS transistor $M_1$.\n\n---\n\n### 1. Circuit Analysis & Terminal Voltages\n\nFrom the circuit diagram:\n* **Source Voltage:** $V_S = 0\\text{ V}$ (grounded)\n* **Drain Voltage:** $V_D = V_X$\n* **Gate Voltage:** $V_G = V_X$ (tied to drain)\n\nSince the gate is connected directly to the drain, this configuration is a **diode-connected NMOS transistor**.\n\n* **Gate-to-Source Voltage:** $V_{GS} = V_G - V_S = V_X$\n* **Drain-to-Source Voltage:** $V_{DS} = V_D - V_S = V_X$\n\n---\n\n### 2. Operating Regions as $V_X$ Varied\n\nLet $V_{TH} > 0$ be the threshold voltage of the NMOS transistor.\n\n#### **Region 1: $V_X < V_{TH}$ (Cutoff / OFF)**\n* Since $V_{GS} = V_X < V_{TH}$, the transistor channel is not formed and $M_1$ is **OFF**.\n* **Current:** \n  $$I_X = 0$$\n\n*(Note: For $V_X < 0$, the top terminal becomes the source because it is at a lower potential than ground. In that case, $V_{GS} = V_X - V_X = 0 < V_{TH}$, so the transistor remains OFF and $I_X = 0$.)*\n\n#### **Region 2: $V_X \\ge V_{TH}$ (Saturation)**\n* When $V_X \\ge V_{TH}$, the transistor turns **ON**.\n* To check the operating region:\n  $$V_{DS} \\ge V_{GS} - V_{TH} \\implies V_X \\ge V_X - V_{TH} \\implies 0 \\ge -V_{TH}$$\n  Since $V_{TH} > 0$, this condition is **always true**.\n* Therefore, a diode-connected MOSFET **always operates in the saturation region** when turned ON.\n\n* **Current equation** (ignoring channel-length modulation $\\lambda$):\n  $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_X - V_{TH})^2$$\n\n* *(If channel-length modulation $\\lambda$ is included:)*\n  $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_X - V_{TH})^2 (1 + \\lambda V_X)$$\n\n---\n\n### 3. Summary of Characteristics\n\n1. **For $V_X < V_{TH}$:** $I_X = 0$ (Current is zero).\n2. **At $V_X = V_{TH}$:** Transistor turns ON ($I_X = 0$).\n3. **For $V_X > V_{TH}$:** $I_X$ increases **quadratically (parabolically)** with $V_X$.\n\n---\n\n### 4. Sketch of $I_X$ vs. $V_X$\n\n```text\n       I_X ^\n           |\n           |                  / (Parabolic growth)\n           |                 /\n           |                /\n           |              .'\n           |            .'\n           |         _.'\n-----------+--------+-------------------> V_X\n           0       V_TH\n```\n\n#### Key features to include when drawing the sketch:\n* **Horizontal Axis ($V_X$):** Mark $0\\text{ V}$ and $V_{TH}$.\n* **Vertical Axis ($I_X$):** Represents current.\n* Draw a flat line along $I_X = 0$ for all $V_X < V_{TH}$.\n* Draw a smooth, upward-bending **parabolic curve** starting from $(V_{TH}, 0)$ for $V_X \\ge V_{TH}$.",
        "format": "markdown",
        "sha256": "65e012d0928a08d5cbb47c50fbb61481aad5c79ae1ea214473b26db1b3db091e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold, and sketches a quadratic rise above threshold. The negative-\u001b[?25lVX discussion is outside the main point and does not affect the essential answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3548,
        "total_tokens": 4664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2616,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3548,
        "total_tokens": 4664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2616,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find and sketch the relationship between **$I_X$** and **$V_X$**, we analyze the operating regions of the NMOS transistor ($M_1$) as the gate voltage $V_X$ increases.\n\n---\n\n### **1. Circuit Parameters & Voltages**\n* **Gate Voltage:** $V_G = V_X$\n* **Source Voltage:** $V_S = 0\\text{ V}$ (Grounded)\n* **Drain Voltage:** $V_D = 1\\text{ V}$ (Fixed DC supply)\n* **Gate-to-Source Voltage:** $V_{GS} = V_X - 0 = V_X$\n* **Drain-to-Source Voltage:** $V_{DS} = 1\\text{ V} - 0 = 1\\text{ V}$\n* **Current:** $I_X = I_D$ (Current entering the drain terminal)\n\n---\n\n### **2. Operating Regions of $M_1$ as $V_X$ Varies**\n\n#### **Region 1: Cutoff Region** ($V_X < V_{TH}$)\n* **Condition:** $V_{GS} < V_{TH} \\implies V_X < V_{TH}$\n* The transistor is OFF, so no current flows.\n* **Current Equation:** \n  $$I_X = 0$$\n\n---\n\n#### **Region 2: Saturation Region** ($V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$)\n* **Condition:** $V_{GS} \\ge V_{TH}$ and $V_{DS} \\ge V_{GS} - V_{TH}$\n  $$1\\text{ V} \\ge V_X - V_{TH} \\implies V_X \\le V_{TH} + 1\\text{ V}$$\n* The transistor is ON and operating in **saturation** (ignoring channel length modulation $\\lambda = 0$).\n* **Current Equation:**\n  $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n* **Behavior:** $I_X$ grows **quadratically** with respect to $V_X$.\n* At $V_X = V_{TH} + 1\\text{ V}$, the current reaches:\n  $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (1)^2 = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L}$$\n\n---\n\n#### **Region 3: Triode (Linear) Region** ($V_X > V_{TH} + 1\\text{ V}$)\n* **Condition:** $V_{GS} - V_{TH} > V_{DS} \\implies V_X > V_{TH} + 1\\text{ V}$\n* The transistor enters the **triode region** because the channel pinches off at the drain end.\n* **Current Equation:**\n  $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_{GS} - V_{TH}) V_{DS} - \\frac{1}{2} V_{DS}^2 \\right]$$\n  Substituting $V_{GS} = V_X$ and $V_{DS} = 1\\text{ V}$:\n  $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left( V_X - V_{TH} - 0.5 \\right)$$\n* **Behavior:** $I_X$ increases **linearly** with respect to $V_X$ with a constant slope of $\\mu_n C_{ox} \\frac{W}{L}$.\n\n---\n\n### **3. Summary Table**\n\n| Range of $V_X$ | Operating Region | Equation for $I_X$ | Curve Characteristic |\n| :--- | :--- | :--- | :--- |\n| **$V_X < V_{TH}$** | Cutoff | $I_X = 0$ | Flat line at zero |\n| **$V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$** | Saturation | $I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$ | Quadratic curve (parabola opening up) |\n| **$V_X > V_{TH} + 1\\text{ V}$** | Triode | $I_X = \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH} - 0.5)$ | Straight line with slope $\\mu_n C_{ox} \\frac{W}{L}$ |\n\n---\n\n### **4. Sketch of $I_X$ vs. $V_X$**\n\n```\n              Ix ^\n                 |                                      / (Linear: slope = μn*Cox*W/L)\n                 |                                     /\n                 |                                    /\n                 |                                  .' \n                 |                                 / \n  1/2 μn C_ox W/L|--------------------------------* (V_X = V_TH + 1 V)\n                 |                              .' \n                 |                             /   (Quadratic growth)\n                 |                           .'\n                 |__________________________/\n                 0                  V_TH    V_TH + 1 V             --> Vx\n```\n\n#### **Key Sketch Features to Include:**\n1. **Zero current** for $V_X < V_{TH}$.\n2. **Smooth parabolic rise** starting at $V_X = V_{TH}$.\n3. **Transition point** at $V_X = V_{TH} + 1\\text{ V}$ where current value is $\\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L}$.\n4. **Straight line (linear growth)** for $V_X > V_{TH} + 1\\text{ V}$.",
        "format": "markdown",
        "sha256": "dfa454c54ec9776f07232d75ceaa7c5f3f533eb001b0b519141dfdd7abbd6db6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the quadratic rise from VTH to VTH + 1 V and the transition to a roughly linear triode-region rise beyond it, matching the full-credit rule.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 3019,
        "total_tokens": 4112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1654,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 3019,
        "total_tokens": 4112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1654,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch $I_X$ versus $V_X$, we analyze the operating regions of the NMOS transistor $M_1$ as the gate voltage $V_X$ increases from $0\\text{ V}$.\n\n---\n\n### **1. Circuit Analysis**\n\n* **Transistor Type:** NMOS ($M_1$)\n* **Gate Voltage ($V_G$):** $V_X$\n* **Source Voltage ($V_S$):** $0\\text{ V}$ (Ground)\n* **Drain Voltage ($V_D$):** $1\\text{ V}$\n* **Overdrive Voltage:** $V_{GS} - V_{TH} = V_X - V_{TH}$\n* **Drain-Source Voltage:** $V_{DS} = 1\\text{ V} - 0\\text{ V} = 1\\text{ V}$\n* **Current:** $I_X = I_D$ (current flowing into the drain)\n\n---\n\n### **2. Regions of Operation**\n\n#### **Region 1: Cutoff ($V_X < V_{TH}$)**\n* **Condition:** $V_{GS} < V_{TH} \\implies V_X < V_{TH}$\n* **Current:** The channel is not formed, so no current flows.\n$$I_X = 0$$\n\n---\n\n#### **Region 2: Saturation ($V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$)**\n* **Condition:** $V_{GS} \\ge V_{TH}$ and $V_{DS} \\ge V_{GS} - V_{TH} \\implies 1\\text{ V} \\ge V_X - V_{TH} \\implies V_X \\le V_{TH} + 1\\text{ V}$\n* **Current:** The transistor is in saturation. Neglecting channel-length modulation ($\\lambda = 0$):\n$$I_X = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_X - V_{TH})^2$$\n\n> **Behavior:** $I_X$ increases **quadratically (parabolically)** starting at $V_X = V_{TH}$.\n\n---\n\n#### **Region 3: Triode / Linear Region ($V_X > V_{TH} + 1\\text{ V}$)**\n* **Condition:** $V_{DS} < V_{GS} - V_{TH} \\implies 1\\text{ V} < V_X - V_{TH} \\implies V_X > V_{TH} + 1\\text{ V}$\n* **Current:** Substituting $V_{DS} = 1\\text{ V}$ into the triode equation:\n$$I_X = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) \\left[ (V_X - V_{TH})V_{DS} - \\frac{1}{2}V_{DS}^2 \\right]$$\n$$I_X = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) \\left[ (V_X - V_{TH})(1) - 0.5 \\right]$$\n\n> **Behavior:** $I_X$ grows **linearly** with respect to $V_X$ with a constant slope of $\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)$.\n\n---\n\n### **3. Key Transition Points**\n\n1. **At $V_X = V_{TH}$:** Current turns on from $0$.\n2. **At $V_X = V_{TH} + 1\\text{ V}$:** Boundary between saturation and triode regions.\n   * Current value: $I_X = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (1\\text{ V})^2$\n   * The curve transitions smoothly (continuous value and first derivative) from quadratic growth to linear growth.\n\n---\n\n### **4. Sketch of $I_X$ vs. $V_X$**\n\n```\n                  IX ^\n                     |\n                     |                           /  (Linear slope: μn*Cox*W/L)\n                     |                          /\n                     |                        .-'  (Triode Region)\n                     |                     .-'\n                     |                  .-'\n                     |              _.-'  (Saturation Region: Quadratic growth)\n                     |          _.-'\n                     |       .-'\n   ------------------+------*-----------------------------> VX\n     0               |     V_TH        V_TH + 1 V\n     <--- Cutoff --->|  <-- Saturation -->|<--- Triode --->\n       (IX = 0)      |\n```\n\n### **Summary of Plot Characteristics:**\n* **$V_X < V_{TH}$:** Zero current ($I_X = 0$).\n* **$V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$:** Convex quadratic curve bending upwards.\n* **$V_X > V_{TH} + 1\\text{ V}$:** Straight line with a positive slope.",
        "format": "markdown",
        "sha256": "9aed670b35a97489453072a1b1c6fcbf8cb6a982e3bb5ff055a7ac70df7e1857"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the quadratic saturation-region rise up to VTH + 1 V and the roughly linear triode-region rise beyond it, with the appropriate cutoff behavior.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 3327,
        "total_tokens": 4420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 3327,
        "total_tokens": 4420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch $I_X$ as a function of $V_X$, we analyze the operating regions of the NMOS transistor $M_1$.\n\n---\n\n### **1. Circuit Analysis**\n\nFrom the given circuit diagram:\n* **Gate Voltage:** $V_G = V_X \\implies V_{GS} = V_X - 0 = V_X$\n* **Drain Voltage:** $V_D = 1\\text{ V} \\implies V_{DS} = 1\\text{ V} - 0 = 1\\text{ V}$\n* **Source Voltage:** $V_S = 0\\text{ V}$\n* **Current:** $I_X$ flows directly into the drain terminal, so $I_X = I_D$.\n\n---\n\n### **2. Regions of Operation**\n\n#### **Region 1: Cutoff Region ($V_X < V_{TH}$)**\n* **Condition:** $V_{GS} < V_{TH} \\implies V_X < V_{TH}$\n* The channel has not formed, so the transistor is **OFF**.\n* **Current Equation:**\n  $$I_X = 0$$\n\n---\n\n#### **Region 2: Saturation Region ($V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$)**\n* **Condition:** $V_{GS} \\ge V_{TH}$ and $V_{DS} \\ge V_{GS} - V_{TH}$\n  $$1 \\ge V_X - V_{TH} \\implies V_X \\le V_{TH} + 1\\text{ V}$$\n* **Current Equation:**\n  $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n* **Behavior:** $I_X$ increases **quadratically** (parabolically) with $V_X$.\n* At the boundary $V_X = V_{TH} + 1\\text{ V}$:\n  $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (1)^2 = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L}$$\n\n---\n\n#### **Region 3: Triode (Linear) Region ($V_X > V_{TH} + 1\\text{ V}$)**\n* **Condition:** $V_{DS} < V_{GS} - V_{TH}$\n  $$1 < V_X - V_{TH} \\implies V_X > V_{TH} + 1\\text{ V}$$\n* **Current Equation:**\n  $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_{GS} - V_{TH})V_{DS} - \\frac{1}{2}V_{DS}^2 \\right]$$\n  Substituting $V_{GS} = V_X$ and $V_{DS} = 1\\text{ V}$:\n  $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left( V_X - V_{TH} - 0.5 \\right)$$\n* **Behavior:** $I_X$ increases **linearly** with $V_X$, with a constant slope equal to $\\mu_n C_{ox} \\frac{W}{L}$.\n\n---\n\n### **3. Sketch of $I_X$ versus $V_X$**\n\n```text\n                  IX ^\n                     |\n                     |                         /  (Triode: Linear)\n                     |                        /   Slope = μn*Cox*(W/L)\n                     |                       /\n  1/2 μn*Cox*(W/L) - + . . . . . . . . . .  /\n                     |                    ./\n                     |                  .'  (Saturation: Quadratic)\n                     |               .-'\n  -------------------+-------------+-------+-------------------> VX\n                     0           VTH     VTH + 1V\n                         Cutoff\n```\n\n### **Summary of Key Features for the Plot:**\n1. **$V_X < V_{TH}$:** $I_X = 0$ (flat along the horizontal axis).\n2. **$V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$:** Curve bends upwards **quadratically**.\n3. **$V_X = V_{TH} + 1\\text{ V}$:** Smooth transition point at $I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}$.\n4. **$V_X > V_{TH} + 1\\text{ V}$:** Linearly increasing straight line with slope $\\mu_n C_{ox} \\frac{W}{L}$.",
        "format": "markdown",
        "sha256": "b0120ae55e4aa31ff615652137f5f4030224a5c28f7382f7036d2297d75a9856"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions, with a quadratic rise from VTH to VTH + 1 V and a roughly linear rise beyond that point.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 3303,
        "total_tokens": 4396,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2221,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 3303,
        "total_tokens": 4396,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2221,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the device shown in the figure **cannot** act as a current source.\n\n---\n\n### **Explanation:**\n\n1. **Device Configuration:**\n   * Both the **gate** and **drain** terminals of the PMOS transistor ($M_1$) are connected to ground ($V_G = 0\\text{ V}$ and $V_D = 0\\text{ V}$). \n   * Since the gate and drain are at the same potential ($V_{GD} = 0$), this device is in a **diode-connected** configuration.\n\n2. **Current-Voltage Characteristic:**\n   * When the voltage $V_X$ at the source terminal exceeds the threshold voltage magnitude ($V_X > |V_{THp}|$), the transistor operates in the saturation region.\n   * The current $I_X$ flowing into the source is approximately:\n     $$I_X \\approx \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right) (V_X - |V_{THp}|)^2$$\n   * Because $I_X$ varies strongly with $V_X$, the current is not constant with respect to changes in terminal voltage.\n\n3. **Output Resistance:**\n   * A proper current source requires a **very high** (ideally infinite) output resistance ($R_{\\text{out}} \\to \\infty$) so that it delivers a constant current regardless of voltage variations.\n   * Looking into the source terminal of this diode-connected PMOS, the small-signal resistance is:\n     $$R_{\\text{out}} \\approx \\frac{1}{g_m} \\parallel r_o \\approx \\frac{1}{g_m}$$\n   * Since $1/g_m$ represents a **low impedance**, the device behaves like a **diode (or a non-linear resistor/load)**, not a current source.",
        "format": "markdown",
        "sha256": "332c4589d8e32fcf4477a570f51950c95dfb1328cfb5932d212f0a673eeb59b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS and its grounded gate/drain connections, and explains that the diode-connected device has low small-signal resistance (about 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1080,
        "output_tokens": 2735,
        "total_tokens": 3815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1080,
        "output_tokens": 2735,
        "total_tokens": 3815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, the device shown in the figure cannot act as a current source.**\n\n---\n\n### **Why? (Detailed Explanation)**\n\n1. **Requirement for a Current Source:**\n   For a circuit element to function as an effective current source, the current $I_X$ flowing through it must be **independent** (or nearly independent) of the voltage $V_X$ across its terminals. In small-signal terms, the output resistance looking into the terminal must be **very high** ($R_{\\text{out}} \\to \\infty$).\n\n2. **Circuit Analysis:**\n   * The figure shows a PMOS transistor $M_1$ with its **gate** and **drain** both connected to ground ($V_G = 0\\text{ V}$, $V_D = 0\\text{ V}$).\n   * The **source** terminal is connected to the node of interest at voltage $V_X$.\n   * Therefore, the source-to-gate voltage is directly dependent on $V_X$:\n     $$V_{SG} = V_S - V_G = V_X - 0 = V_X$$\n\n3. **Current Equation:**\n   Assuming $V_X > |V_{th}|$, the transistor operates in the saturation region because $V_{SD} = V_X = V_{SG} > V_{SG} - |V_{th}|$. The current $I_X$ is given by:\n   $$I_X \\approx \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_X - |V_{th}|)^2$$\n\n4. **Small-Signal Resistance:**\n   Because $V_{SG}$ changes directly as $V_X$ changes, any variation in terminal voltage $\\Delta V_X$ causes a strong variation in current $\\Delta I_X$ through the transistor's transconductance ($g_m$). \n\n   Taking the derivative to find the small-signal resistance looking into the source node:\n   $$R_{\\text{out}} = \\frac{dV_X}{dI_X} \\approx \\frac{1}{g_m + g_{mb}}$$\n\n---\n\n### **Conclusion:**\nThe small-signal resistance looking into this device is **low** ($R_{\\text{out}} \\approx 1/g_m$) rather than high. Consequently, it behaves like a **diode-connected resistor** rather than a current source.",
        "format": "markdown",
        "sha256": "49a8450b039b78c9ace640317fa002d31d60a122e1084efdf73c20b6e51cc475"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS with gate and drain grounded and source at VX. It explains that the diode-connected device has low small-signal resistance (approximately 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1080,
        "output_tokens": 3141,
        "total_tokens": 4221,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1080,
        "output_tokens": 3141,
        "total_tokens": 4221,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, the device shown in the figure cannot act as a current source.**\n\nHere is the step-by-step breakdown of why:\n\n---\n\n### 1. Transistor Configuration and Operation\n* **Transistor Type:** The arrow at the top terminal pointing into the channel identifies $M_1$ as a **PMOS transistor**, where the top terminal is the **Source** ($S$).\n* **Terminal Connections:** \n  * Gate ($G$) is connected to ground ($V_G = 0\\text{ V}$).\n  * Drain ($D$) is connected to ground ($V_D = 0\\text{ V}$).\n  * Source ($S$) is connected to the node with voltage $V_X$ and current $I_X$.\n\n### 2. Region of Operation\nFor the PMOS transistor to conduct current, the source-to-gate voltage $V_{SG}$ must exceed its threshold voltage magnitude $|V_{THP}|$:\n$$V_{SG} = V_S - V_G = V_X - 0 = V_X > |V_{THP}|$$\n\nTo check for saturation:\n$$V_{SD} \\ge V_{SG} - |V_{THP}|$$\nSubstituting $V_{SD} = V_X - 0 = V_X$ and $V_{SG} = V_X$:\n$$V_X \\ge V_X - |V_{THP}| \\implies 0 \\ge -|V_{THP}|$$\n\nSince $|V_{THP}| > 0$, this condition is **always satisfied**. Therefore, whenever $M_1$ is ON ($V_X > |V_{THP}|$), it operates strictly in the **saturation region**.\n\n---\n\n### 3. Output Resistance Analysis\nA key requirement for any **current source** is a **very high output impedance** ($R_{out} \\to \\infty$), ensuring that the current stays constant regardless of variations in the voltage $V_X$ across it.\n\nLooking into the **source terminal** of $M_1$:\n* The large-signal current is:\n  $$I_X \\approx \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_X - |V_{THP}|)^2$$\n  Notice that $I_X$ depends heavily (quadratically) on $V_X$.\n\n* The small-signal output resistance seen at the top node is:\n  $$R_{out} = \\frac{\\partial V_X}{\\partial I_X} \\approx \\frac{1}{g_m + g_{mb}} \\parallel r_o \\approx \\frac{1}{g_m}$$\n\n---\n\n### Conclusion\nBecause the output impedance looking into the source is **low** ($\\approx 1/g_m$), any change in $V_X$ causes a significant change in $I_X$. \n\nInstead of acting as a current source, this circuit acts as a **low-impedance, diode-connected non-linear load** (or resistor). For a MOSFET to act as a current source, the current must be drawn from/sourced to the **drain** (where the output impedance is high, $R_{out} \\approx r_o$), not the source.",
        "format": "markdown",
        "sha256": "81812249a540aec7cdcc9bb96bc976c45d842c01a81194293479006960a2ec4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS with gate and drain grounded, and explains that its diode-connected configuration presents low impedance (about 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1080,
        "output_tokens": 4790,
        "total_tokens": 5870,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4077,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1080,
        "output_tokens": 4790,
        "total_tokens": 5870,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4077,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **PMOS Common-Source (CS) Amplifier with Source Degeneration**. \n\nBelow is a detailed analysis covering its topology, large-signal (DC) operation, small-signal (AC) parameters, and key characteristics.\n\n---\n\n### 1. Circuit Topology & Terminal Identification\n\n* **Transistor Type:** P-channel MOSFET (PMOS), labeled $M_1$.\n* **Gate Terminal:** Connected to the input voltage $V_{\\text{in}}$.\n* **Source Terminal:** Connected to $V_{DD}$ through the source degeneration resistor $R_S$.\n* **Drain Terminal:** Connected to Ground through the load resistor $R_D$, which is also the output node $V_{\\text{out}}$.\n\n---\n\n### 2. Large-Signal (DC / Biasing) Analysis\n\nFor the transistor $M_1$ to operate as an amplifier, it must be biased in the **saturation region**.\n\n1. **Source and Drain Voltages:**\n   $$V_S = V_{DD} - I_D R_S$$\n   $$V_D = I_D R_D = V_{\\text{out}}$$\n\n2. **Source-to-Gate Voltage ($V_{SG}$):**\n   $$V_{SG} = V_S - V_{\\text{in}} = V_{DD} - I_D R_S - V_{\\text{in}}$$\n\n3. **Drain Current ($I_D$) in Saturation:**\n   $$I_D = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right) (V_{SG} - |V_{thp}|)^2$$\n\n4. **Saturation Condition:**\n   For a PMOS to remain in saturation:\n   $$V_{SD} \\ge V_{SG} - |V_{thp}| \\implies V_{\\text{in}} + |V_{thp}| \\ge V_{\\text{out}}$$\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\n\n* **Ideal Case** (neglecting body effect $g_{mb}$ and finite output resistance $r_o$):\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -\\frac{g_m R_D}{1 + g_m R_S}$$\n\n  * **Phase Inversion:** The negative sign indicates an **inverting amplifier**. When $V_{\\text{in}}$ increases, $V_{SG}$ decreases, reducing $I_D$ and pulling $V_{\\text{out}}$ down towards ground.\n  * If $g_m R_S \\gg 1$, the gain simplifies to:\n    $$A_v \\approx -\\frac{R_D}{R_S}$$\n    *(This shows that source degeneration makes the gain well-defined and controlled by the ratio of passive resistors).*\n\n* **Including Body Effect ($g_{mb}$):**\n  If the PMOS body is connected to $V_{DD}$ (instead of its source), body effect increases effective degeneration:\n  $$A_v = -\\frac{g_m R_D}{1 + (g_m + g_{mb}) R_S}$$\n\n* **Including Channel-Length Modulation ($r_o$):**\n  $$A_v \\approx -\\frac{g_m R_D}{1 + (g_m + g_{mb})R_S + \\frac{R_D + R_S}{r_o}}$$\n\n---\n\n#### **B. Input Impedance ($R_{\\text{in}}$)**\n\nSince the input is connected to the insulated gate of the MOSFET:\n$$R_{\\text{in}} = \\infty \\quad \\text{(at low frequencies)}$$\n\n---\n\n#### **C. Output Impedance ($R_{\\text{out}}$)**\n\nLooking back into the output node ($V_{\\text{out}}$):\n\n* **Neglecting $r_o$:**\n  $$R_{\\text{out}} \\approx R_D$$\n\n* **Considering $r_o$:**\n  $$R_{\\text{out}} = R_D \\parallel R_{\\text{out,stage}}$$\n  where the resistance looking up into the transistor drain is:\n  $$R_{\\text{out,stage}} = r_o + \\left[1 + (g_m + g_{mb}) r_o\\right] R_S \\approx r_o \\left[1 + (g_m + g_{mb}) R_S\\right]$$\n\n---\n\n### 4. Summary of Key Characteristics & Trade-offs\n\n| Parameter | Impact of Source Degeneration ($R_S$) |\n| :--- | :--- |\n| **Gain Stability** | **Improved** — Less sensitive to transistor parameter variations ($g_m$, temperature, process). |\n| **Linearity** | **Improved** — Reduces distortion over larger input signal swings. |\n| **Voltage Gain** | **Reduced** — Reduced by a factor of $(1 + g_m R_S)$ compared to an un-degenerated CS stage. |\n| **Output Resistance** | **Increased** — Increases the output impedance looking into the transistor drain. |",
        "format": "markdown",
        "sha256": "b82b8f773c56451687bfcdb1ea36d769b0f695c9d5aa3248c3338f6a133a346a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain -gm RD/(1 + gm RS), as required for full credit.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3183,
        "total_tokens": 4299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3183,
        "total_tokens": 4299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **PMOS Common-Source (CS) Amplifier with Source Degeneration**. \n\n---\n\n### 1. Circuit Component & Terminal Identification\n\n* **Transistor $M_1$**: PMOS MOSFET\n* **Gate (G)**: Connected to the input voltage source $V_{\\text{in}}$\n* **Source (S)**: Connected to the supply voltage $V_{DD}$ through the source degeneration resistor $R_S$\n* **Drain (D)**: Connected to ground through the load resistor $R_D$, and serves as the output node $V_{\\text{out}}$\n\n---\n\n### 2. DC (Biasing) Analysis\n\nAssuming $M_1$ operates in the **Saturation Region**:\n\n1. **Gate Voltage:**  \n   $$V_G = V_{\\text{in, DC}}$$\n\n2. **Source Voltage:**  \n   $$V_S = V_{DD} - I_D R_S$$\n\n3. **Drain Voltage:**  \n   $$V_D = V_{\\text{out, DC}} = I_D R_D$$\n\n4. **Drain Current ($I_D$):**  \n   $$I_D = \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_{SG} - |V_{th,p}|)^2$$\n   Where $V_{SG} = V_S - V_G = V_{DD} - I_D R_S - V_{\\text{in, DC}}$.\n\n5. **Saturation Condition:**  \n   For $M_1$ to remain in saturation, the source-drain voltage must satisfy:\n   $$V_{SD} \\ge V_{SG} - |V_{th,p}| \\implies V_{\\text{out}} \\le V_{\\text{in}} + |V_{th,p}|$$\n\n---\n\n### 3. Small-Signal AC Analysis\n\n#### **A. Voltage Gain ($A_v$)**\n\n* **Ideal Case (neglecting output resistance $r_o \\to \\infty$):**\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -\\frac{g_m R_D}{1 + g_m R_S}$$\n\n* **With Body Effect ($g_{mb}$):**\n  If the body/bulk of $M_1$ is connected to $V_{DD}$ (standard PMOS configuration), body effect occurs because $V_{SB} \\neq 0$:\n  $$A_v = -\\frac{g_m R_D}{1 + (g_m + g_{mb}) R_S}$$\n\n* **With Finite Transistor Output Resistance ($r_o$):**\n  $$A_v \\approx -\\frac{g_m R_D}{1 + g_m R_S + \\frac{R_S + R_D}{r_o}}$$\n\n*(The negative sign indicates a 180° phase inversion between input and output).*\n\n---\n\n#### **B. Input Impedance ($R_{\\text{in}}$)**\n\nBecause the gate of a MOSFET is isolated by an oxide layer, at low to mid frequencies:\n$$R_{\\text{in}} = \\infty$$\n\n---\n\n#### **C. Output Impedance ($R_{\\text{out}}$)**\n\nLooking back into the output node $V_{\\text{out}}$:\n\n* **Neglecting $r_o$:**\n  $$R_{\\text{out}} \\approx R_D$$\n\n* **Including $r_o$:**\n  $$R_{\\text{out}} = R_D \\parallel R_{\\text{out, stage}}$$\n  Where $R_{\\text{out, stage}} = r_o + (1 + g_m r_o) R_S \\approx r_o (1 + g_m R_S)$.\n\n---\n\n### 4. Role and Impact of $R_S$ (Source Degeneration)\n\n1. **Gain Reduction:** Reduces total voltage gain by a factor of approximately $(1 + g_m R_S)$.\n2. **Linearity Improvement:** Expands the linear input voltage range and reduces signal distortion.\n3. **Bias Stabilization:** Stabilizes the DC operating point against variations in temperature, process parameters, and threshold voltage $|V_{th,p}|$.\n4. **Increased Output Impedance:** Raises the effective output resistance looking into the drain terminal.",
        "format": "markdown",
        "sha256": "5fb738a41945c845b52c2e3bd90cc40387346f55644d090c43f9ae70a1ca58d5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS). The additional body-effect refinement is consistent with the golden solution.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3034,
        "total_tokens": 4150,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3034,
        "total_tokens": 4150,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed analysis of the given circuit.\n\n---\n\n### **1. Circuit Identification**\n* **Transistor Type:** PMOS Transistor ($M_1$)\n* **Topology:** **Common-Source (CS) Amplifier with Source Degeneration**\n* **Connections:**\n  * **Gate ($G$):** Connected to the input signal $V_{\\text{in}}$.\n  * **Source ($S$):** Connected to the supply voltage $V_{DD}$ through the source degeneration resistor $R_S$.\n  * **Drain ($D$):** Connected to ground through the load resistor $R_D$, and the output $V_{\\text{out}}$ is taken from this node.\n\n---\n\n### **2. DC Operating Point (Biasing Analysis)**\n\nFor the PMOS transistor to operate as a linear amplifier, it must be biased in the **saturation region**.\n\n1. **Terminal Voltages:**\n   $$V_G = V_{\\text{in,DC}}$$\n   $$V_S = V_{DD} - I_D R_S$$\n   $$V_D = I_D R_D$$\n\n2. **Source-to-Gate Voltage ($V_{SG}$):**\n   $$V_{SG} = V_S - V_G = V_{DD} - I_D R_S - V_{\\text{in,DC}}$$\n\n3. **Drain Current ($I_D$) in Saturation:**\n   $$I_D = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right) (V_{SG} - |V_{THP}|)^2$$\n\n4. **Saturation Condition:**\n   $$V_{SD} \\ge V_{SG} - |V_{THP}| \\implies V_{DG} \\ge |V_{THP}|$$\n   $$(V_{DD} - I_D R_S - I_D R_D) \\ge (V_{DD} - I_D R_S - V_{\\text{in,DC}}) - |V_{THP}|$$\n\n---\n\n### **3. Small-Signal Analysis**\n\n#### **A. Small-Signal Parameters**\n* Transconductance: \n  $$g_m = \\sqrt{2 \\mu_p C_{ox} \\left(\\frac{W}{L}\\right) I_D} = \\frac{2 I_D}{V_{SG} - |V_{THP}|}$$\n* Output Resistance: \n  $$r_o = \\frac{1}{\\lambda I_D}$$\n\n---\n\n#### **B. Voltage Gain ($A_v$)**\n\nIgnoring body effect ($g_{mb} = 0$) and channel-length modulation ($r_o \\to \\infty$):\n\n1. **Small-signal drain current:**\n   $$i_d = g_m v_{sg} = g_m (v_s - v_{\\text{in}})$$\n\n2. **Source voltage relation:**\n   $$v_s = -i_d R_S = -g_m (v_s - v_{\\text{in}}) R_S$$\n   $$v_s (1 + g_m R_S) = g_m R_S v_{\\text{in}} \\implies v_s = \\frac{g_m R_S}{1 + g_m R_S} v_{\\text{in}}$$\n\n3. **Output voltage:**\n   $$v_{\\text{out}} = i_d R_D = g_m (v_s - v_{\\text{in}}) R_D = -\\frac{g_m R_D}{1 + g_m R_S} v_{\\text{in}}$$\n\n4. **Small-Signal Voltage Gain ($A_v$):**\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -\\frac{g_m R_D}{1 + g_m R_S}$$\n\n* **Including Body Effect ($g_{mb}$):** (If N-well is connected to $V_{DD}$ rather than the source $S$):\n  $$A_v = -\\frac{g_m R_D}{1 + (g_m + g_{mb}) R_S}$$\n\n* **Including Transistor Output Resistance ($r_o$):**\n  $$A_v \\approx -\\frac{g_m R_D}{1 + (g_m + g_{mb}) R_S + \\frac{R_S + R_D}{r_o}}$$\n\n---\n\n#### **C. Input Resistance ($R_{\\text{in}}$)**\nLooking into the gate of the PMOS transistor at low frequencies:\n$$R_{\\text{in}} = \\infty$$\n\n---\n\n#### **D. Output Resistance ($R_{\\text{out}}$)**\nLooking back into the $V_{\\text{out}}$ node:\n* Resistance looking up into the drain of $M_1$:\n  $$R_{\\text{out,drain}} = r_o + (1 + (g_m + g_{mb}) r_o) R_S \\approx r_o (1 + g_m R_S)$$\n* Total output resistance:\n  $$R_{\\text{out}} = R_D \\parallel R_{\\text{out,drain}} = R_D \\parallel \\left[ r_o + (1 + (g_m + g_{mb}) r_o) R_S \\right]$$\n\n---\n\n### **4. Key Effects of Source Degeneration ($R_S$)**\n\n1. **Gain Reduction:** Gain is reduced by a factor of $(1 + g_m R_S)$, making the overall gain less sensitive to transistor parameters ($g_m$).\n2. **Improved Linearity:** Degeneration extends the linear input dynamic range and reduces distortion.\n3. **Increased Output Impedance:** Increases the internal resistance seen looking into the drain terminal.\n4. **Bandwidth Extension:** Reduces input capacitance (due to Miller effect mitigation) and increases amplifier bandwidth.",
        "format": "markdown",
        "sha256": "0cf9e067c66d59ad490e6b9a8177e3c87f948c33af4792c781d81da641c59966"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gm RD/(1 + gm RS), satisfying the full-credit rule. The body-effect refinement is also appropriate.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3917,
        "total_tokens": 5033,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2593,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3917,
        "total_tokens": 5033,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2593,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is an **NMOS Common-Drain Amplifier**, commonly known as a **Source Follower**.\n\nBelow is a detailed breakdown of its operation, key equations, and performance characteristics.\n\n---\n\n### 1. Large-Signal (DC) Analysis\n\n* **Transistor Terminal Connections:**\n  * **Gate:** Connected to the input voltage $V_{\\text{in}}$.\n  * **Drain:** Connected directly to the supply voltage $V_{DD}$.\n  * **Source:** Connected to the output node $V_{\\text{out}}$ and grounded via the source resistor $R_S$.\n\n* **DC Operation:**\n  Assuming the transistor $M_1$ operates in the **saturation region** ($V_{DS} \\ge V_{GS} - V_{TH}$):\n  \n  $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_{GS} - V_{TH})^2$$\n\n  Since the output voltage is generated across $R_S$:\n  \n  $$V_{\\text{out}} = I_D R_S$$\n\n  The gate-to-source voltage is:\n  \n  $$V_{GS} = V_{\\text{in}} - V_{\\text{out}}$$\n\n  Rearranging gives:\n  \n  $$V_{\\text{out}} = V_{\\text{in}} - V_{GS}$$\n\n  > **Insight:** $V_{\\text{out}}$ \"follows\" $V_{\\text{in}}$ with a level shift equal to $V_{GS}$ (hence the name *Source Follower*).\n\n---\n\n### 2. Small-Signal (AC) Analysis\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\n\n* **Ideal Case** (Ignoring body effect $g_{mb} = 0$ and channel-length modulation $r_o \\to \\infty$):\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} R_S}{1 + g_{m1} R_S}$$\n\n  Since $g_{m1} R_S$ is typically much greater than 1, $A_v \\approx 1$ (less than unity, non-inverting).\n\n* **Practical Case** (Including channel-length modulation $r_{o1}$ and body effect $g_{mb1}$):\n  $$A_v = \\frac{g_{m1} (R_S \\parallel r_{o1})}{1 + (g_{m1} + g_{mb1})(R_S \\parallel r_{o1})}$$\n\n---\n\n#### **B. Input Impedance ($R_{\\text{in}}$)**\nLooking into the gate of $M_1$:\n$$R_{\\text{in}} \\approx \\infty \\quad \\text{(at low frequencies)}$$\n\nBecause the gate oxide acts as an insulator, virtually no current flows into the input terminal.\n\n---\n\n#### **C. Output Impedance ($R_{\\text{out}}$)**\nLooking back into the source terminal from the output node:\n\n* **Ideal Case** (Ignoring $r_{o1}$ and $g_{mb1}$):\n  $$R_{\\text{out}} = R_S \\parallel \\frac{1}{g_{m1}} \\approx \\frac{1}{g_{m1}}$$\n\n* **Practical Case** (Including $r_{o1}$ and $g_{mb1}$):\n  $$R_{\\text{out}} = R_S \\parallel r_{o1} \\parallel \\frac{1}{g_{m1} + g_{mb1}} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n---\n\n### 3. Summary of Characteristics & Applications\n\n| Characteristic | Value / Property |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | Positive, slightly less than 1 ($\\approx 1$) |\n| **Input Impedance ($R_{\\text{in}}$)** | Very High ($\\approx \\infty$) |\n| **Output Impedance ($R_{\\text{out}}$)** | Low ($\\approx 1/g_{m1}$) |\n| **Phase Shift** | $0^\\circ$ (Non-inverting) |\n\n#### **Main Application:**\nBecause of its **high input impedance** and **low output impedance**, the source follower is widely used as a **Voltage Buffer** (or impedance transformer) to drive heavy (low-resistance) loads without loading down the preceding high-impedance stage.",
        "format": "markdown",
        "sha256": "c0ca8cf3f63670ba6698a5738842113a3729baf5fb76bceb6a1d0092b7ebf8a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain gmRS/(1+gmRS). The body-effect, output-resistance, and other supplementary discussion is also consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 1912,
        "total_tokens": 3023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 915,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 1912,
        "total_tokens": 3023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 915,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Common-Drain Amplifier**, standardly known as a **Source Follower** (using an NMOS transistor).\n\n---\n\n### 1. Circuit Identification & Terminal Connections\n\n* **Transistor ($M_1$):** N-channel MOSFET (NMOS).\n* **Gate (Input):** Connected to the input voltage source $V_{\\text{in}}$.\n* **Drain:** Connected directly to the positive power supply rail $V_{DD}$ (acts as an AC ground).\n* **Source (Output):** Connected to the output terminal $V_{\\text{out}}$ and to ground via a source resistor $R_S$.\n\n---\n\n### 2. DC (Large-Signal) Analysis\n\nFor $M_1$ to operate in the **saturation region** (which is necessary for linear amplification), the following condition must hold:\n$$V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_{DD} - V_{\\text{out}} \\ge V_{\\text{in}} - V_{\\text{out}} - V_{TH1} \\implies V_{DD} \\ge V_{\\text{in}} - V_{TH1}$$\n\nThe DC drain current $I_D$ is equal to the current flowing through $R_S$:\n$$I_D = \\frac{V_{\\text{out}}}{R_S} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{\\text{out}} - V_{TH1})^2$$\n\nThe output voltage follows the input voltage with a DC level shift:\n$$V_{\\text{out}} = V_{\\text{in}} - V_{GS1}$$\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\n\n1. **Ideal Case** (ignoring channel-length modulation $\\lambda = 0 \\implies r_o = \\infty$, and body effect $g_{mb} = 0$):\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} R_S}{1 + g_{m1} R_S} < 1$$\n   *As $g_{m1} R_S \\gg 1$, $A_v \\approx 1$ (hence the term \"source follower\").*\n\n2. **Including Channel-Length Modulation ($r_{O1}$) and Body Effect ($g_{mb1}$):**\n   $$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{R_S \\parallel r_{O1}}} = \\frac{g_{m1} (R_S \\parallel r_{O1})}{1 + (g_{m1} + g_{mb1})(R_S \\parallel r_{O1})}$$\n\n---\n\n#### **B. Input Impedance ($R_{\\text{in}}$)**\nSince the input signal drives the insulated gate of the MOSFET:\n$$R_{\\text{in}} \\approx \\infty \\quad \\text{(at low frequencies)}$$\n\n---\n\n#### **C. Output Impedance ($R_{\\text{out}}$)**\nLooking back into the output node $V_{\\text{out}}$:\n* **Ideal:** \n  $$R_{\\text{out}} = R_S \\parallel \\frac{1}{g_{m1}} \\approx \\frac{1}{g_{m1}}$$\n* **With body effect and channel length modulation:**\n  $$R_{\\text{out}} = R_S \\parallel r_{O1} \\parallel \\frac{1}{g_{m1} + g_{mb1}}$$\n\n---\n\n### 4. Key Summary & Applications\n\n| Parameter | Characteristic |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | Slightly less than $1$ (non-inverting) |\n| **Input Impedance ($R_{\\text{in}}$)** | Very High |\n| **Output Impedance ($R_{\\text{out}}$)** | Low ($\\approx 1/g_m$) |\n\n* **Primary Function:** **Voltage Buffer / Impedance Matching**  \n  It drives low-impedance loads without loading down a preceding high-impedance stage.\n* **Secondary Function:** **DC Level Shifter**  \n  Shifts the signal downward by $V_{GS1}$.",
        "format": "markdown",
        "sha256": "7604c04b7b9a6699832e493b20fdab80084e68c3fe488309c043a79da94b47cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as an NMOS source follower and gives its positive, less-than-unity gain, gmRS/(1 + gmRS). The supplementary body-effect, output-resistance, and operating-region analysis is also consistent.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 2312,
        "total_tokens": 3423,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 2312,
        "total_tokens": 3423,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is an **NMOS Common-Drain Amplifier**, commonly referred to as a **Source Follower**. \n\nIn this topology, the input signal is applied to the **Gate**, the output is taken from the **Source**, and the **Drain** is connected directly to a constant supply voltage ($V_{\\text{DD}}$), making it common to AC small signals (grounded for AC).\n\n---\n\n### 1. Circuit Configuration Overview\n\n* **Transistor:** $M_1$ (n-channel MOSFET)\n* **Input ($V_{\\text{in}}$):** Gate terminal\n* **Output ($V_{\\text{out}}$):** Source terminal\n* **Supply ($V_{\\text{DD}}$):** Drain terminal\n* **Source Resistor ($R_S$):** Connected between the source terminal and ground.\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nFor $M_1$ to operate properly as an amplifier, it must be biased in the **saturation region**.\n\n1. **Threshold Condition:** \n   $$V_{\\text{GS}} > V_{\\text{TH}} \\implies V_{\\text{in}} - V_{\\text{out}} > V_{\\text{TH}}$$\n\n2. **Drain Current ($I_D$):**\n   $$I_D = \\frac{1}{2} \\mu_n C_{\\text{ox}} \\frac{W}{L} (V_{\\text{GS}} - V_{\\text{TH}})^2 = \\frac{1}{2} k_n' \\frac{W}{L} (V_{\\text{in}} - V_{\\text{out}} - V_{\\text{TH}})^2$$\n\n3. **Output Voltage ($V_{\\text{out}}$):**\n   $$V_{\\text{out}} = I_D \\cdot R_S$$\n\n4. **Saturation Region Condition ($V_{\\text{DS}} \\ge V_{\\text{GS}} - V_{\\text{TH}}$):**\n   $$V_{\\text{DD}} - V_{\\text{out}} \\ge V_{\\text{in}} - V_{\\text{out}} - V_{\\text{TH}} \\implies V_{\\text{DD}} \\ge V_{\\text{in}} - V_{\\text{TH}}$$\n\n---\n\n### 3. Small-Signal Analysis\n\nLet:\n* $g_m$ = Transconductance ($\\frac{\\partial I_D}{\\partial V_{\\text{GS}}}$)\n* $r_o$ = Output resistance due to channel-length modulation ($\\lambda$)\n* $g_{mb}$ = Body-effect transconductance (if the bulk/substrate is tied to ground instead of the source)\n\n#### A. Voltage Gain ($A_v$)\n\nUsing the small-signal model at the source node:\n$$i_d = g_m v_{gs} = g_m (v_{\\text{in}} - v_{\\text{out}})$$\n\nNeglecting body effect ($g_{mb} = 0$) and channel-length modulation ($r_o \\to \\infty$):\n$$v_{\\text{out}} = i_d \\cdot R_S = g_m (v_{\\text{in}} - v_{\\text{out}}) R_S$$\n\nRearranging for the voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{g_m R_S}{1 + g_m R_S}$$\n\n* Since $g_m R_S > 0$, the voltage gain is **positive**, in-phase, and **slightly less than 1** ($A_v \\approx 1$).\n* Including $r_o$ and body effect ($g_{mb}$):\n  $$A_v = \\frac{g_m (R_S \\parallel r_o)}{1 + (g_m + g_{mb})(R_S \\parallel r_o)}$$\n\n#### B. Input Resistance ($R_{\\text{in}}$)\n\nBecause the input is connected directly to the insulated MOSFET gate:\n$$R_{\\text{in}} = \\infty \\quad \\text{(at low frequencies)}$$\n\n#### C. Output Resistance ($R_{\\text{out}}$)\n\nTo find $R_{\\text{out}}$, deactivate the input ($v_{\\text{in}} = 0$) and apply a test voltage at the output:\n$$R_{\\text{out}} = R_S \\parallel \\frac{1}{g_m + g_{mb}} \\parallel r_o \\approx \\frac{1}{g_m}$$\n\nSince transconductance $g_m$ is typically large, $\\frac{1}{g_m}$ gives a **very low output impedance**.\n\n---\n\n### 4. Summary of Key Characteristics\n\n| Parameter | Formula (Ideal) | Practical Value |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\frac{g_m R_S}{1 + g_m R_S}$ | $\\approx 1$ (Non-inverting) |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ | Very High |\n| **Output Impedance ($R_{\\text{out}}$)** | $R_S \\parallel \\frac{1}{g_m}$ | Low ($\\approx \\frac{1}{g_m}$) |\n\n---\n\n### 5. Primary Applications\n\n1. **Voltage Buffer:** Used between a high-impedance source and a low-impedance load to prevent signal degradation (loading effects).\n2. **Level Shifter:** Shifts the DC level of the input signal downward by $V_{\\text{GS}}$.",
        "format": "markdown",
        "sha256": "4414726e2c33c95c8f9bf3cbf02d85d738cc0ef9405e353eba20ef6727ec6883"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, \\(g_mR_S/(1+g_mR_S)\\). The supplementary analysis is consistent with the topology.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 2114,
        "total_tokens": 3225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 882,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 2114,
        "total_tokens": 3225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 882,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Common-Gate (CG) MOSFET Amplifier** stage.\n\n---\n\n### **1. Circuit Identification & Topology**\n\n* **Transistor Type:** $M_1$ is an N-channel MOSFET (NMOS).\n* **Gate Terminal:** Connected to $V_{DD}$, which acts as an **AC ground** (constant DC bias voltage).\n* **Source Terminal:** Receives the input signal ($V_{\\text{in}}$).\n* **Drain Terminal:** Provides the output signal ($V_{\\text{out}}$), loaded by resistor $R_D$.\n\n---\n\n### **2. Small-Signal Performance Parameters**\n\n#### **A. Small-Signal Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)**\n* **Ideal / Simplified Case** (ignoring channel-length modulation $\\lambda = 0$ or $r_o \\to \\infty$):\n  $$A_v = g_m R_D$$\n  *(Note: The gain is **non-inverting** / positive because an increase in $V_{\\text{in}}$ decreases $V_{GS}$, reducing drain current and raising $V_{\\text{out}}$).*\n\n* **Including Body Effect ($g_{mb}$):**\n  $$A_v = (g_m + g_{mb}) R_D$$\n\n* **Including Transistor Output Resistance ($r_o$):**\n  $$A_v = \\frac{(g_m + g_{mb}) r_o + 1}{r_o + R_D} R_D \\approx g_m (R_D \\parallel r_o)$$\n\n---\n\n#### **B. Input Impedance ($R_{\\text{in}}$)**\nLooking into the **source** terminal:\n* **Ideal Case:**\n  $$R_{\\text{in}} \\approx \\frac{1}{g_m}$$\n* **Including Body Effect & $r_o$:**\n  $$R_{\\text{in}} \\approx \\frac{1}{g_m + g_{mb}} + \\frac{R_D}{(g_m + g_{mb}) r_o}$$\n\n---\n\n#### **C. Output Impedance ($R_{\\text{out}}$)**\nLooking into the **drain** terminal:\n* **Assuming an ideal input voltage source ($R_S = 0$):**\n  $$R_{\\text{out}} = R_D \\parallel r_o$$\n* **Ideal Case ($r_o \\to \\infty$):**\n  $$R_{\\text{out}} = R_D$$\n\n---\n\n### **3. Key Characteristics & Applications**\n\n1. **Non-Inverting Gain:** Unlike the common-source stage, the common-gate stage does not invert the phase of the input signal.\n2. **Low Input Impedance ($\\approx 1/g_m$):** \n   * Makes it ideal for **impedance matching** with low-impedance signal sources (e.g., $50\\,\\Omega$ coaxial cables or RF antennas).\n   * Functions effectively as a **current buffer**.\n3. **High Frequency Performance (No Miller Effect):**\n   * The gate is AC grounded, which prevents the gate-drain capacitance ($C_{gd}$) from undergoing Miller multiplication.\n   * As a result, it offers a wider bandwidth compared to a Common-Source amplifier, making it popular in **RF Low-Noise Amplifiers (LNAs)** and **Cascode** configurations.",
        "format": "markdown",
        "sha256": "565ebab9e9501493bef3655ea3898675c794f8f8f5a3ee23df3d48f2b0d913cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input, gate-grounded common-gate stage and gives the key non-inverting gain and approximately 1/gm input resistance. The additional small-signal details are consistent with the circuit; minor approximations do not change the essential analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 2656,
        "total_tokens": 3738,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1902,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 2656,
        "total_tokens": 3738,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1902,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete analysis of the circuit:\n\n---\n\n### 1. Circuit Identification\n* **Topology:** **Common-Gate (CG) MOSFET Amplifier**\n* **Transistor Type:** $N$-channel MOSFET ($M_1$)\n* **Input Node:** Source terminal ($V_{\\text{in}}$)\n* **Output Node:** Drain terminal ($V_{\\text{out}}$)\n* **Control Terminal:** Gate terminal, connected directly to a constant DC bias voltage ($V_{DD}$), making it an **AC ground**.\n\n---\n\n### 2. DC Operating Conditions\nFor the amplifier to operate linearly in the **saturation region**, the following DC conditions must be satisfied:\n\n1. **Gate-to-Source Voltage ($V_{GS}$):**\n   $$V_{GS} = V_{DD} - V_{\\text{in,DC}} > V_{TH}$$\n   *(where $V_{TH}$ is the threshold voltage of transistor $M_1$)*\n\n2. **Drain-to-Source Voltage ($V_{DS}$):**\n   $$V_{DS} \\ge V_{GS} - V_{TH}$$\n   $$V_{\\text{out,DC}} - V_{\\text{in,DC}} \\ge (V_{DD} - V_{\\text{in,DC}}) - V_{TH} \\implies V_{\\text{out,DC}} \\ge V_{DD} - V_{TH}$$\n\n---\n\n### 3. Small-Signal Analysis\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\nApplying a small-signal voltage $v_{\\text{in}}$ at the source:\n* Gate is at AC ground ($v_g = 0$).\n* Small-signal gate-to-source voltage: $v_{gs} = v_g - v_s = -v_{\\text{in}}$.\n* The small-signal drain current produced by $M_1$ is:\n  $$i_d = -g_m v_{gs} = g_m v_{\\text{in}}$$\n\nThe output voltage developed across load resistor $R_D$ is:\n$$v_{\\text{out}} = i_d \\cdot R_D = g_m R_D v_{\\text{in}}$$\n\nThus, the ideal small-signal voltage gain is:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = g_m R_D$$\n\n* **Including Body Effect ($g_{mb}$):**\n  Since the bulk (substrate) is typically connected to ground ($0\\text{ V}$) while the source is at $v_{\\text{in}}$, body effect increases the effective transconductance:\n  $$A_v = (g_m + g_{mb}) R_D$$\n\n* **Including Channel-Length Modulation ($r_O$):**\n  Since the source is driven directly by an ideal voltage source $v_{\\text{in}}$:\n  $$A_v \\approx (g_m + g_{mb}) (R_D \\parallel r_O)$$\n\n---\n\n#### **B. Small-Signal Input Impedance ($R_{\\text{in}}$)**\nLooking into the source terminal:\n* **Ideal case (ignoring $r_O$):**\n  $$R_{\\text{in}} \\approx \\frac{1}{g_m + g_{mb}}$$\n* **Including $r_O$ and load resistance $R_D$:**\n  $$R_{\\text{in}} = \\frac{R_D + r_O}{1 + (g_m + g_{mb}) r_O}$$\n\nThis results in a **low input impedance**, which is a defining characteristic of the common-gate configuration.\n\n---\n\n#### **C. Small-Signal Output Impedance ($R_{\\text{out}}$)**\nLooking into the drain terminal (with $V_{\\text{in}}$ AC grounded):\n$$R_{\\text{out}} = R_D \\parallel r_O \\approx R_D$$\n\n---\n\n### 4. Key Summary Characteristics\n\n| Parameter | Common-Gate Expression | Characteristics |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $+(g_m + g_{mb}) R_D$ | **Non-inverting** positive gain |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\approx \\frac{1}{g_m + g_{mb}}$ | **Low** input resistance |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\approx R_D$ | **Moderate to high** output resistance |\n\n---\n\n### 5. Applications & Advantages\n1. **High-Frequency Amplifiers (RF Front-Ends):**\n   * Since the gate is at AC ground, the gate-drain overlap capacitance ($C_{gd}$) does not experience the **Miller effect**. This significantly increases the bandwidth compared to a Common-Source amplifier.\n2. **Current Buffer:**\n   * Used to isolate a low-impedance input source from a high-impedance output node with unity current gain ($A_i \\approx 1$).\n3. **Impedance Matching:**\n   * The low input impedance ($\\approx 1/g_m$) makes it easy to match to $50\\,\\Omega$ antennas or transmission lines in RF circuits.",
        "format": "markdown",
        "sha256": "f9433fa9ad1cb4fcce508a7523ce116340499dcb8e0efb9a5a7986814df1037a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology, AC-grounded gate, non-inverting gain, and low source input resistance. The added body-effect and finite-ro expressions are consistent with the stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3197,
        "total_tokens": 4279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2040,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3197,
        "total_tokens": 4279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2040,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive small-signal and DC analysis of the given circuit.\n\n---\n\n### **1. Circuit Identification**\n* **Type:** **Common-Gate (CG) Amplifier** using an NMOS transistor ($M_1$).\n* **Terminals:**\n  * **Input ($V_{\\text{in}}$):** Applied at the **Source** terminal.\n  * **Output ($V_{\\text{out}}$):** Taken from the **Drain** terminal.\n  * **Gate:** Connected directly to **$V_{DD}$** (AC ground).\n\n---\n\n### **2. DC (Biasing) Conditions**\nFor the transistor $M_1$ to operate in the **saturation (active) region** as an amplifier:\n1. **Gate-to-Source Condition:**\n   $$V_{GS} = V_{DD} - V_{\\text{in,DC}} > V_{TH}$$\n2. **Drain-to-Source Condition:**\n   $$V_{DS} \\ge V_{GS} - V_{TH} \\implies V_{\\text{out,DC}} \\ge V_{DD} - V_{TH}$$\n\n---\n\n### **3. Small-Signal Analysis**\n\n#### **A. Small-Signal Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)**\n\n* **Ideal Case** (neglecting channel-length modulation $r_O \\to \\infty$ and body effect):\n  * Gate is at AC ground ($v_g = 0$).\n  * Gate-source small-signal voltage: $v_{gs} = v_g - v_s = 0 - v_{\\text{in}} = -v_{\\text{in}}$.\n  * Small-signal drain current: $i_d = g_m v_{gs} = -g_m v_{\\text{in}}$.\n  * Output voltage: $v_{\\text{out}} = -i_d R_D = -(-g_m v_{\\text{in}}) R_D = g_m R_D v_{\\text{in}}$.\n\n  $$\\mathbf{A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = g_m R_D} \\quad \\text{(Non-inverting)}$$\n\n* **With Body Effect ($g_{mb}$):**\n  If the body (bulk) is tied to ground, $v_{bs} = 0 - v_{\\text{in}} = -v_{\\text{in}}$:\n  $$A_v = (g_m + g_{mb}) R_D = g_m (1 + \\eta) R_D$$\n  *(where $\\eta = \\frac{g_{mb}}{g_m}$ is the body effect coefficient)*\n\n* **With Channel-Length Modulation ($r_O$ finite):**\n  $$A_v \\approx (g_m + g_{mb}) (R_D \\parallel r_O)$$\n\n---\n\n#### **B. Input Resistance ($R_{\\text{in}}$)**\nLooking into the **source** terminal:\n\n* **Neglecting $r_O$:**\n  $$R_{\\text{in}} = \\frac{1}{g_m + g_{mb}} \\approx \\frac{1}{g_m}$$\n\n* **Including $r_O$ and load $R_D$:**\n  $$R_{\\text{in}} = \\frac{R_D + r_O}{1 + (g_m + g_{mb}) r_O} \\approx \\frac{1}{g_m + g_{mb}} + \\frac{R_D}{(g_m + g_{mb}) r_O}$$\n\n*(The input resistance is relatively **low**, typical for common-gate stages).*\n\n---\n\n#### **C. Output Resistance ($R_{\\text{out}}$)**\nLooking into the **drain** terminal:\n\n* **Assuming an ideal input voltage source ($R_S = 0$):**\n  $$R_{\\text{out}} = R_D \\parallel r_O \\approx R_D \\quad (\\text{if } r_O \\gg R_D)$$\n\n* **Including source resistance ($R_S$):**\n  $$R_{\\text{out}} = R_D \\parallel \\left[ r_O + (1 + (g_m + g_{mb}) r_O) R_S \\right]$$\n\n---\n\n### **4. Summary & Key Features**\n\n| Parameter | Formula (Ideal) | Formula (With Body Effect & $r_O$) |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $+g_m R_D$ | $(g_m + g_{mb})(R_D \\parallel r_O)$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\frac{1}{g_m}$ | $\\frac{1}{g_m + g_{mb}}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $R_D$ | $R_D \\parallel r_O$ |\n| **Phase Shift** | $0^\\circ$ (Non-inverting) | $0^\\circ$ |\n\n### **Key Advantages:**\n1. **High Frequency Response (No Miller Effect):** Because the gate is grounded for AC signals, the gate-drain capacitance ($C_{gd}$) does not undergo Miller multiplication. This gives the common-gate configuration a wider bandwidth compared to a common-source amplifier.\n2. **Current Buffer:** Excellent for impedance matching with low-impedance signal sources (e.g., $50\\,\\Omega$ RF antennas).",
        "format": "markdown",
        "sha256": "371407b3ad43430d93fd6536f3fb78a130a84b70b5e66498bf000ac0262c354a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input common-gate topology and gives the essential results: low input resistance near 1/gm and non-inverting gain near +gm(RD || ro). The added body-effect and loading details are conditional and do not undermine the core analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 2500,
        "total_tokens": 3582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1265,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 2500,
        "total_tokens": 3582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1265,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis.\n\n---\n\n### **1. Circuit Topology Identification**\n* **Transistor Type:** $M_1$ is an **N-channel MOSFET (NMOS)**.\n* **Amplifier Configuration:** **Common-Gate (CG)** stage, where:\n  * The **Gate** is connected to a constant DC bias voltage $V_b$ (AC ground).\n  * The **Drain** is connected to the load resistor $R_D$ and serves as the output node ($V_{\\text{out}}$).\n  * The **Source** is connected to the input signal $V_{\\text{in}}$ through the coupling capacitor $C_1$.\n\n---\n\n### **2. Analysis of the Circuit As Drawn**\n\n#### **A. DC Bias Analysis**\n* **Gate Voltage:** $V_G = V_b$\n* **Source Voltage:** $V_S = 0\\text{ V}$ (tied directly to ground)\n* **Gate-to-Source Voltage:** \n  $$V_{GS} = V_G - V_S = V_b$$\n* Assuming $V_b > V_{TH}$ (threshold voltage), the transistor is **turned ON**.\n* Assuming $M_1$ operates in the **saturation region** ($V_{DS} \\ge V_{GS} - V_{TH}$):\n  $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_b - V_{TH})^2$$\n* **DC Output Voltage:**\n  $$V_{\\text{out, DC}} = V_{DD} - I_D R_D$$\n\n---\n\n#### **B. Small-Signal (AC) Analysis**\n1. **Coupling Capacitor ($C_1$):** At operating frequencies, $C_1$ acts as a short circuit for AC signals.\n2. **Source Node Potential:** Because the source node is tied directly to **ground**:\n   $$v_s = 0\\text{ V}$$\n3. **Gate Node Potential:** Connected to a constant DC bias voltage $V_b$, so:\n   $$v_g = 0\\text{ V}$$\n4. **Small-Signal Gate-to-Source Voltage ($v_{gs}$):**\n   $$v_{gs} = v_g - v_s = 0 - 0 = 0\\text{ V}$$\n5. **Small-Signal Drain Current ($i_d$):**\n   $$i_d = g_m v_{gs} = 0\\text{ A}$$\n6. **Small-Signal Output Voltage ($v_{\\text{out}}$):**\n   $$v_{\\text{out}} = -i_d R_D = 0\\text{ V}$$\n\n#### **Key Results for the Circuit As Drawn:**\n* **Voltage Gain:** \n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0$$\n* **Input Impedance (seen after $C_1$):** \n  $$R_{\\text{in}} = 0\\,\\Omega \\quad \\text{(shorted to ground)}$$\n\n> **Conclusion on the Diagram:** As drawn, the input signal $V_{\\text{in}}$ is directly shunted to ground at the source terminal. Therefore, $V_{\\text{in}}$ cannot modulate $V_{GS}$, resulting in **zero AC voltage gain**.\n\n---\n\n### **3. Standard Common-Gate Stage (Corrected Circuit Context)**\n\nIf the ground connection at the source node is removed (or replaced by a bias current source $I_{SS}$ or resistor $R_S$), the circuit operates as a functional **Common-Gate Amplifier**:\n\n1. **Small-Signal Voltage Gain ($A_v$):**\n   * **Without channel-length modulation ($\\lambda = 0$):**\n     $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = + g_m R_D$$\n     *(Non-inverting amplifier with positive gain)*\n   * **With Body Effect ($\\eta = g_{mb}/g_m$):**\n     $$A_v = (g_m + g_{mb}) R_D$$\n\n2. **Input Impedance ($R_{\\text{in}}$):**\n   $$R_{\\text{in}} \\approx \\frac{1}{g_m + g_{mb}}$$\n   *(Low input impedance, characteristic of common-gate stages)*\n\n3. **Output Impedance ($R_{\\text{out}}$):**\n   $$R_{\\text{out}} \\approx R_D \\parallel r_O \\approx R_D$$\n\n---\n\n### **Summary Table**\n\n| Parameter | As Drawn (Direct Source Ground) | Standard Common-Gate (Properly Biased Source) |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $0$ | $+g_m R_D$ |\n| **Input Impedance ($R_{\\text{in}}$)** | $0\\,\\Omega$ | $\\approx 1/g_m$ |\n| **Output Impedance ($R_{\\text{out}}$)** | $R_D$ | $R_D$ |\n| **Phase Difference** | N/A | $0^\\circ$ (In-phase) |",
        "format": "markdown",
        "sha256": "9d51528d1d3d51a60903943993d3b31323f1046af79137fee8f15e1a6cfcaeb5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source/input node is hard-shorted to ground and concludes the ideal gain from Vin is zero. The additional discussion of a corrected common-gate stage does not undermine the essential answer.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 4020,
        "total_tokens": 5109,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2838,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 4020,
        "total_tokens": 5109,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2838,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the given MOSFET circuit.\n\n---\n\n### 1. Circuit Overview and Topology Identification\n\n* **Transistor Type:** $M_1$ is an **N-channel MOSFET (NMOS)**.\n* **Gate Node:** Connected to a constant DC bias voltage $V_b$ (AC ground).\n* **Drain Node:** Connected to $V_{DD}$ through a load resistor $R_D$. The output $V_{\\text{out}}$ is taken at this node.\n* **Source Node:** Connected to the input source $V_{\\text{in}}$ via coupling capacitor $C_1$, and **directly connected to Ground**.\n\nThis configuration is intended to be a **Common-Gate (CG) Amplifier**; however, due to the direct ground connection at the source, it exhibits a specific behavior analyzed below.\n\n---\n\n### 2. DC Operating Point (Bias Analysis)\n\nFor DC conditions, the coupling capacitor $C_1$ acts as an open circuit:\n\n1. **Source Voltage ($V_S$):** \n   $$V_S = 0\\text{ V}$$\n2. **Gate Voltage ($V_G$):** \n   $$V_G = V_b$$\n3. **Gate-to-Source Voltage ($V_{GS}$):** \n   $$V_{GS} = V_G - V_S = V_b - 0 = V_b$$\n\nFor $M_1$ to be turned ON and operating in the **saturation region**:\n* $V_b > V_{TH}$ (where $V_{TH}$ is the threshold voltage).\n* $V_{DS} \\ge V_{GS} - V_{TH} \\implies V_{\\text{out, DC}} \\ge V_b - V_{TH}$.\n\nThe DC drain current $I_D$ is:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_b - V_{TH})^2$$\n\nThe DC output voltage is:\n$$V_{\\text{out, DC}} = V_{DD} - I_D R_D$$\n\n---\n\n### 3. AC Small-Signal Analysis & Voltage Gain ($A_v$)\n\nIn small-signal (AC) analysis:\n* Constant DC voltage source $V_b$ acts as an **AC ground** $\\implies v_g = 0$.\n* The source node is **physically tied to ground** $\\implies v_s = 0$.\n\nEven though the AC input signal $V_{\\text{in}}$ is connected via $C_1$, the source terminal is held strictly at $0\\text{ V}$ by the direct connection to ground:\n1. **Small-Signal Gate-Source Voltage ($v_{gs}$):**\n   $$v_{gs} = v_g - v_s = 0 - 0 = 0\\text{ V}$$\n\n2. **Small-Signal Drain Current ($i_d$):**\n   $$i_d = g_m v_{gs} = g_m (0) = 0\\text{ A}$$\n\n3. **Small-Signal Output Voltage ($v_{\\text{out}}$):**\n   $$v_{\\text{out}} = -i_d (R_D \\parallel r_O) = 0\\text{ V}$$\n\n4. **Small-Signal Voltage Gain ($A_v$):**\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0$$\n\n> **Key Conclusion:** Because the source node is tied directly to ground, the input signal $V_{\\text{in}}$ is shorted to ground at AC frequencies, resulting in a **voltage gain of zero ($A_v = 0$)**.\n\n---\n\n### 4. Input and Output Impedance\n\n* **Input Impedance ($R_{\\text{in}}$):** \n  Looking into the coupling capacitor $C_1$, the signal sees a direct connection to ground. \n  $$R_{\\text{in}} = \\frac{1}{j\\omega C_1} \\xrightarrow{\\text{midband}} 0\\,\\Omega$$\n\n* **Output Impedance ($R_{\\text{out}}$):** \n  Looking into the output node (drain):\n  $$R_{\\text{out}} = R_D \\parallel r_O \\approx R_D$$\n\n---\n\n### 5. How to Fix the Circuit for Proper CG Operation\n\nTo convert this into a functioning **Common-Gate Amplifier** with positive gain:\n\n1. **Remove the direct connection from the source node to ground.**\n2. **Insert a source resistor ($R_S$) or a DC current source ($I_{SS}$)** between the source node and ground.\n\n#### Corrected Voltage Gain (with $R_S$ or $I_{SS}$):\nIf a current source $I_{SS}$ (infinite AC impedance) is placed at the source:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx g_m R_D \\quad (\\text{ignoring body effect and } r_O)$$",
        "format": "markdown",
        "sha256": "b75169e2b09c5ec179f8f0011bb1940187beb5fdf48f001707f348d2948129e8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer correctly identifies that the source is directly shorted to ground, so the input is shorted and the ideal midband voltage gain is zero, as required for full credit.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 3623,
        "total_tokens": 4712,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 3623,
        "total_tokens": 4712,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a complete step-by-step analysis of the circuit, covering its topology, DC biasing, small-signal (AC) behavior, and practical considerations.\n\n---\n\n### 1. Circuit Topology & Component Identification\n\n* **Transistor ($M_1$):** N-channel MOSFET (NMOS).\n* **Gate Terminal:** Connected to a fixed DC bias voltage $V_b$ (AC ground).\n* **Drain Terminal:** Connected to the positive supply $V_{DD}$ through resistor $R_D$, with the output signal $V_{\\text{out}}$ tapped at the drain node.\n* **Source Terminal:** Connected **directly to ground** ($0\\text{ V}$) and AC-coupled to the input voltage source $V_{\\text{in}}$ through capacitor $C_1$.\n\n---\n\n### 2. DC Analysis (Biasing / Operating Point)\n\nTo determine the DC operating point:\n\n1. **Gate-to-Source Voltage ($V_{GS}$):**\n   Since the source is tied directly to ground ($V_S = 0\\text{ V}$) and the gate is tied to $V_b$:\n   $$V_{GS} = V_b - 0 = V_b$$\n\n2. **Drain Current ($I_D$):**\n   Assuming $V_b > V_{TH}$ (where $V_{TH}$ is the threshold voltage of $M_1$) and $M_1$ operates in the **saturation region**:\n   $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_b - V_{TH})^2$$\n\n3. **Drain-to-Source Voltage ($V_{DS}$):**\n   $$V_{DS} = V_{\\text{out, DC}} = V_{DD} - I_D R_D$$\n   *(For saturation mode to hold, $V_{DS} \\ge V_b - V_{TH}$ must be satisfied).*\n\n---\n\n### 3. AC Small-Signal Analysis & Voltage Gain\n\n1. **Gate AC Voltage ($v_g$):**\n   The gate is connected to a constant DC bias voltage $V_b$, so it is at AC ground:\n   $$v_g = 0$$\n\n2. **Source AC Voltage ($v_s$):**\n   The source node is tied directly to **ground** by a conductor. An ideal ground holds the node potential strictly at $0\\text{ V}$:\n   $$v_s = 0$$\n\n3. **Small-Signal Gate-Source Voltage ($v_{gs}$):**\n   $$v_{gs} = v_g - v_s = 0 - 0 = 0$$\n\n4. **Small-Signal Output Voltage ($v_{\\text{out}}$):**\n   Since $v_{gs} = 0$, the controlled current source inside the transistor model produces no AC current:\n   $$i_d = g_m v_{gs} = 0$$\n   Therefore, no AC voltage is developed across $R_D$:\n   $$v_{\\text{out}} = 0$$\n\n5. **Voltage Gain ($A_v$):**\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0$$\n\n---\n\n### 4. Summary & Practical Note\n\n* **Result:** The small-signal voltage gain of this specific circuit is **zero ($A_v = 0$)**. \n* **Reason:** The input signal $V_{\\text{in}}$ is connected to a node that is shorted directly to ground. As a result, $V_{\\text{in}}$ cannot modulate the voltage at the source of $M_1$.\n\n#### Intended Common-Gate Design:\nThis circuit appears to be a common-gate amplifier conceptual test. For a functional **Common-Gate (CG)** amplifier:\n* The direct ground connection at the source node must be removed and replaced by a **bias current source ($I_{SS}$)** or a **source resistor ($R_S$)**.\n* With a source resistor/current source in place, the source node is free to fluctuate with $V_{\\text{in}}$, giving a non-zero voltage gain of approximately:\n  $$A_v \\approx g_m R_D$$",
        "format": "markdown",
        "sha256": "3aec5ac8dee46d8b70875cea3590b4902c2dcc83c6f24d48ecddd31c88611204"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source node is hard-shorted to ground, so the input cannot produce a source signal and the ideal voltage gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 4042,
        "total_tokens": 5131,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 4042,
        "total_tokens": 5131,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown has **2 poles**.\n\n---\n\n### **Detailed Explanation:**\n\n1. **Analysis of the Source Node and $C_{\\text{SB}}$:**\n   * The source terminal of transistor $M_1$ is connected directly to ground. \n   * Since both sides of the source-to-bulk capacitor ($C_{\\text{SB}}$) are connected to ground, there is zero signal voltage across it. Therefore, $C_{\\text{SB}}$ is shorted out and does not affect the circuit's dynamic response or contribute any poles.\n\n2. **Identifying Independent Signal Nodes:**\n   * **Node 1 (Gate Node, $V_G$):** Connected to $R_S$, $C_{\\text{GS}}$, and $C_{\\text{GD}}$.\n   * **Node 2 (Drain Node, $V_D$ / $V_{\\text{out}}$):** Connected to $R_D$, $C_{\\text{DB}}$, and $C_{\\text{GD}}$.\n\n3. **Formulating Node Equations:**\n   Applying Kirchhoff's Current Law (KCL) at the two signal nodes ($V_G$ and $V_D$):\n\n   * **At the Gate Node ($V_G$):**\n     $$\\frac{V_G - V_{\\text{in}}}{R_S} + s C_{\\text{GS}} V_G + s C_{\\text{GD}} (V_G - V_D) = 0$$\n\n   * **At the Drain Node ($V_D$):**\n     $$g_m V_G + \\frac{V_D}{R_D} + s C_{\\text{DB}} V_D + s C_{\\text{GD}} (V_D - V_G) = 0$$\n\n4. **Characteristic Equation and Order:**\n   Solving this system of 2 linear equations yields a transfer function $H(s) = \\frac{V_{\\text{out}}(s)}{V_{\\text{in}}(s)}$ with a denominator (characteristic polynomial) of the form:\n   $$D(s) = a s^2 + b s + c$$\n\n   Since the denominator is a **2nd-degree polynomial** in $s$, the transfer function has **2 poles** (along with 1 right-half-plane zero at $s = \\frac{g_m}{C_{\\text{GD}}}$).",
        "format": "markdown",
        "sha256": "d9fe95cbae8a1e6199109f1ed456898ee3916cd860f0f597f3245baf950270b7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count by noting that C_SB is grounded at both terminals; the two-node equations also yield a second-order denominator.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 2922,
        "total_tokens": 4015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2404,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 2922,
        "total_tokens": 4015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2404,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure has **2 poles**.\n\n---\n\n### **Detailed Explanation:**\n\n1. **Identify the Independent Nodes:**\n   * **Source Node:** The source of $M_1$ is connected directly to ground. Since both terminals of the capacitor $C_{\\text{SB}}$ are connected to ground (AC ground), $C_{\\text{SB}}$ is shorted out and has no effect on the frequency response.\n   * **Gate Node ($V_G$):** This is the first independent signal node, connected to the input via $R_S$, to ground via $C_{\\text{GS}}$, and to the drain via $C_{\\text{GD}}$.\n   * **Drain Node ($V_D$ / $V_{\\text{out}}$):** This is the second independent signal node, connected to AC ground via $R_D$, to ground via $C_{\\text{DB}}$, and to the gate via $C_{\\text{GD}}$.\n\n2. **Count the Poles (System Order):**\n   * There are **2 independent signal nodes** ($V_G$ and $V_D$) with non-zero nodal capacitances.\n   * The network of capacitors ($C_{\\text{GS}}$, $C_{\\text{GD}}$, $C_{\\text{DB}}$) connects these two nodes, resulting in a **2nd-order system** (a system described by a second-degree characteristic polynomial).\n\nTherefore, the circuit has **2 poles** (and 1 right-half-plane zero due to $C_{\\text{GD}}$).",
        "format": "markdown",
        "sha256": "aa50971a699eacb6e499496348109ee1ef8fd9b2d8e54851da56045be7d78bd6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the capacitors: CSB is shorted because both terminals are grounded, leaving two independent dynamic nodes.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 2005,
        "total_tokens": 3098,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1674,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 2005,
        "total_tokens": 3098,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1674,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we can analyze the independent nodes and the capacitors present:\n\n### 1. Identify the Circuit Nodes\n* **Gate Node ($V_G$):** Connected to the input through $R_S$.\n* **Drain Node ($V_D / V_{\\text{out}}$):** Connected to $V_{DD}$ (AC ground) through $R_D$.\n* **Source Node ($V_S$):** Directly connected to **ground**.\n\n### 2. Analyze the Capacitors\n* **$C_{\\text{SB}}$ (Source-to-Bulk capacitor):** Both ends of $C_{\\text{SB}}$ are connected to ground (since the source is grounded). Therefore, it is shorted out and does not affect the circuit dynamics.\n* **$C_{\\text{GS}}$ (Gate-to-Source capacitor):** Connected between the Gate node and Ground.\n* **$C_{\\text{GD}}$ (Gate-to-Drain capacitor):** Connected between the Gate node and Drain node.\n* **$C_{\\text{DB}}$ (Drain-to-Bulk capacitor):** Connected between the Drain node and Ground.\n\n### 3. Determine the Number of Poles\nThe number of poles is equal to the number of independent energy storage state variables (or independent dynamic nodes) in the small-signal model.\n\n* There are **2 independent signal nodes** with capacitance to ground/other nodes: the **Gate node** and the **Drain node**.\n* The interaction of $C_{\\text{GS}}$, $C_{\\text{GD}}$, and $C_{\\text{DB}}$ across these two nodes results in a second-order characteristic equation (a quadratic polynomial in $s$ in the denominator of the transfer function $V_{\\text{out}}(s)/V_{\\text{in}}(s)$).\n\n### **Conclusion**\nThe circuit has **2 poles**.",
        "format": "markdown",
        "sha256": "b23b139f666d45cb219c30096c5d2c9dfddcad13e9f8bd7526b431f167928e0b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that CSB is shorted because both terminals are grounded, and that the remaining capacitors produce a second-order denominator with two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 2165,
        "total_tokens": 3258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1760,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 2165,
        "total_tokens": 3258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1760,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed analysis of the given circuit, covering its topology, feedback mechanism, small-signal voltage gain, input impedance, and output impedance.\n\n---\n\n### 1. Circuit Topology & Feedback Classification\n\n* **Base Configuration:** \n  The input signal $V_{\\text{in}}$ is applied to the **Source** of transistor $M_1$, and the output $V_{\\text{out}}$ is taken from the **Drain**. This is a **Common-Gate (CG)** amplifier core.\n\n* **Feedback Network:** \n  Resistors $R_1$ and $R_2$ form a potential divider connected from the output node $V_{\\text{out}}$ back to the gate node $V_F$:\n  $$\\beta = \\frac{V_F}{V_{\\text{out}}} = \\frac{R_2}{R_1 + R_2}$$\n\n* **Feedback Type:** **Voltage-Series (Series-Shunt) Negative Feedback**\n  * **Sampling (Output):** Voltage sampling (senses $V_{\\text{out}}$ in parallel).\n  * **Mixing (Input):** Series mixing (the feedback voltage $V_F$ modifies the gate-source voltage $V_{GS} = V_F - V_{\\text{in}}$).\n\n* **Polarity Check (Negative Feedback):**\n  If $V_{\\text{in}} \\uparrow \\implies V_{GS} = (V_F - V_{\\text{in}}) \\downarrow \\implies I_D \\downarrow \\implies V_{\\text{out}} \\uparrow \\implies V_F \\uparrow \\implies V_{GS} \\uparrow$. \n  The feedback opposes the initial perturbation, proving it is **negative feedback**.\n\n---\n\n### 2. Small-Signal Analysis\n\nAssuming the MOSFET $M_1$ operates in the saturation region with transconductance $g_m$ (and neglecting channel-length modulation $r_o \\to \\infty$ for simple analysis):\n\n#### **A. Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)**\n\n1. **Gate Feedback Voltage:**\n   $$v_F = \\beta v_{\\text{out}} = \\left(\\frac{R_2}{R_1 + R_2}\\right) v_{\\text{out}}$$\n\n2. **Small-Signal Drain Current:**\n   $$i_d = g_m v_{gs} = g_m (v_F - v_{\\text{in}}) = g_m (\\beta v_{\\text{out}} - v_{\\text{in}})$$\n\n3. **Kirchhoff's Current Law (KCL) at the Drain Node ($V_{\\text{out}}$):**\n   The sum of currents leaving the node equals zero:\n   $$i_d + \\frac{v_{\\text{out}}}{R_D} + \\frac{v_{\\text{out}}}{R_1 + R_2} = 0$$\n\n   Define the effective load resistance $R_L' = R_D \\parallel (R_1 + R_2)$:\n   $$g_m (\\beta v_{\\text{out}} - v_{\\text{in}}) + \\frac{v_{\\text{out}}}{R_L'} = 0$$\n\n4. **Solving for Gain $A_v$:**\n   $$v_{\\text{out}} \\left( \\frac{1}{R_L'} + g_m \\beta \\right) = g_m v_{\\text{in}}$$\n\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_L'}{1 + g_m \\beta R_L'}$$\n\n5. **Ideal Closed-Loop Gain Limit:**\n   If the loop gain $T = g_m \\beta R_L' \\gg 1$:\n   $$A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}$$\n\n> **Key Result:** Like a non-inverting operational amplifier, the closed-loop voltage gain becomes nearly independent of transistor parameters ($g_m$) and is set by the resistor ratio $1 + \\frac{R_1}{R_2}$.\n\n---\n\n#### **B. Input Impedance ($R_{\\text{in}}$)**\n\nIn a standard Common-Gate amplifier, the input resistance looking into the source is low ($R_{\\text{in}} \\approx 1/g_m$). However, negative series feedback at the input **increases** the input impedance:\n\n1. Input current flowing into the source node:\n   $$i_{\\text{in}} = -i_d = g_m (v_{\\text{in}} - \\beta v_{\\text{out}})$$\n\n2. Substituting $v_{\\text{out}} = A_v v_{\\text{in}}$:\n   $$i_{\\text{in}} = g_m v_{\\text{in}} \\left( 1 - \\beta \\frac{g_m R_L'}{1 + g_m \\beta R_L'} \\right) = \\frac{g_m v_{\\text{in}}}{1 + g_m \\beta R_L'}$$\n\n3. Input resistance:\n   $$R_{\\text{in}} = \\frac{v_{\\text{in}}}{i_{\\text{in}}} = \\frac{1 + g_m \\beta R_L'}{g_m} = \\frac{1}{g_m} + \\beta R_L'$$\n\n---\n\n#### **C. Output Impedance ($R_{\\text{out}}$)**\n\nVoltage-sampling negative feedback **reduces** the output impedance:\n\n1. Deactivate input ($v_{\\text{in}} = 0$) and apply a test voltage $v_x$ at the output node.\n2. The gate voltage becomes $v_F = \\beta v_x \\implies v_{gs} = \\beta v_x$.\n3. Total test current $i_x$ drawn from $v_x$:\n   $$i_x = g_m v_{gs} + \\frac{v_x}{R_D} + \\frac{v_x}{R_1 + R_2} = v_x \\left( g_m \\beta + \\frac{1}{R_L'} \\right)$$\n\n4. Output resistance:\n   $$R_{\\text{out}} = \\frac{v_x}{i_x} = \\frac{R_L'}{1 + g_m \\beta R_L'}$$\n\n---\n\n### 3. Summary Performance Characteristics\n\n| Parameter | Standard CG Stage | CG Stage with Feedback (This Circuit) |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\approx g_m R_D$ | $\\approx 1 + \\frac{R_1}{R_2}$ (Stabilized) |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\frac{1}{g_m}$ (Low) | $\\frac{1}{g_m} + \\beta R_L'$ (Increased) |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\approx R_D$ (High) | $\\frac{R_L'}{1 + g_m \\beta R_L'}$ (Decreased) |\n| **Phase Relationship** | Non-inverting ($0^\\circ$) | Non-inverting ($0^\\circ$) |",
        "format": "markdown",
        "sha256": "8e27aedcdd254f077f12ec27eddd0d62ff6ff65e2d2ab1fafdd35f30a9cc7389"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative feedback, and derives the correct closed-loop gain. Secondary impedance analyses are not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 5097,
        "total_tokens": 6186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 5097,
        "total_tokens": 6186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed analysis of the given MOSFET amplifier circuit.\n\n---\n\n### **1. Circuit Overview & Components**\n* **Active Device ($M_1$):** N-channel MOSFET.\n* **Input Signal ($V_{\\text{in}}$):** Applied at the **Source** terminal.\n* **Output Signal ($V_{\\text{out}}$):** Taken from the **Drain** terminal.\n* **Drain Resistor ($R_D$):** Connects the supply voltage $V_{DD}$ to the drain node.\n* **Feedback Network ($R_1, R_2$):** A resistive voltage divider connected between the output node ($V_{\\text{out}}$) and ground, feeding a fraction of the output voltage ($V_F$) to the **Gate** terminal.\n\n---\n\n### **2. Feedback Classification**\n\n* **Sampling Method:** The feedback network senses the voltage at the output node ($V_{\\text{out}}$).  \n  $\\rightarrow$ **Voltage Sampling**\n* **Mixing Method:** The feedback voltage $V_F$ is applied to the gate while the input signal $V_{\\text{in}}$ is at the source. The effective controlling voltage is $V_{gs} = V_F - V_{\\text{in}}$.  \n  $\\rightarrow$ **Series Mixing**\n* **Feedback Topology:** **Voltage-Series (Series-Shunt)** Feedback.\n\n#### **Verification of Negative Feedback Loop:**\n1. If $V_{\\text{in}} \\uparrow \\implies V_S \\uparrow \\implies V_{GS} = (V_G - V_S) \\downarrow$\n2. $V_{GS} \\downarrow \\implies I_D \\downarrow$\n3. $I_D \\downarrow \\implies V_{\\text{out}} = V_{DD} - I_D R_D' \\uparrow$\n4. $V_{\\text{out}} \\uparrow \\implies V_F = V_G = V_{\\text{out}} \\left(\\frac{R_2}{R_1 + R_2}\\right) \\uparrow$\n5. $V_G \\uparrow \\implies V_{GS} = (V_G - V_S) \\uparrow$ (opposes the initial decrease in $V_{GS}$)\n\nSince the feedback counteracts the original change in $V_{GS}$, it is **Negative Feedback**.\n\n---\n\n### **3. Small-Signal Parameters & Closed-Loop Voltage Gain**\n\n#### **A. Small-Signal Relations**\nDefine the effective load resistance at the drain:\n$$R_L' = R_D \\parallel (R_1 + R_2)$$\n\nThe feedback factor $\\beta$ (ratio of feedback voltage to output voltage) is:\n$$\\beta = \\frac{R_2}{R_1 + R_2}$$\n\nThe gate voltage is given by:\n$$v_g = \\beta v_{\\text{out}}$$\n\nThe small-signal gate-to-source voltage $v_{gs}$ is:\n$$v_{gs} = v_g - v_s = \\beta v_{\\text{out}} - v_{\\text{in}}$$\n\nThe small-signal drain current $i_d$ is:\n$$i_d = g_m v_{gs} = g_m (\\beta v_{\\text{out}} - v_{\\text{in}})$$\n\n#### **B. Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)**\nWriting KCL at the output (drain) node:\n$$v_{\\text{out}} = -i_d R_L' = -g_m R_L' (\\beta v_{\\text{out}} - v_{\\text{in}})$$\n\nRearranging terms:\n$$v_{\\text{out}} (1 + \\beta g_m R_L') = g_m R_L' v_{\\text{in}}$$\n\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_L'}{1 + \\beta g_m R_L'} = \\frac{g_m (R_D \\parallel (R_1 + R_2))}{1 + \\left(\\frac{R_2}{R_1 + R_2}\\right) g_m (R_D \\parallel (R_1 + R_2))}$$\n\n* **High Loop Gain Approximation ($\\beta g_m R_L' \\gg 1$):**\n  $$A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}$$\n  *(The closed-loop voltage gain becomes stable and independent of transistor parameters $g_m$).*\n\n---\n\n### **4. Impedance Analysis**\n\n#### **A. Input Impedance ($R_{\\text{in}}$)**\nThe input current entering the source terminal is:\n$$i_{\\text{in}} = -i_d = g_m (v_{\\text{in}} - \\beta v_{\\text{out}}) = g_m v_{\\text{in}} (1 - \\beta A_v)$$\n\nSubstituting $A_v = \\frac{g_m R_L'}{1 + \\beta g_m R_L'}$:\n$$i_{\\text{in}} = \\frac{g_m v_{\\text{in}}}{1 + \\beta g_m R_L'}$$\n\n$$R_{\\text{in}} = \\frac{v_{\\text{in}}}{i_{\\text{in}}} = \\frac{1 + \\beta g_m R_L'}{g_m} = \\frac{1}{g_m} + \\beta R_L'$$\n\n> **Effect of Feedback:** Series mixing **increases** the input impedance from $\\frac{1}{g_m}$ (basic common-gate stage) by the factor $(1 + \\beta g_m R_L')$.\n\n---\n\n#### **B. Output Impedance ($R_{\\text{out}}$)**\nTo find $R_{\\text{out}}$, deactivate the input ($v_{\\text{in}} = 0$) and apply a test voltage $v_t$ at the output:\n* $v_s = 0$\n* $v_g = \\beta v_t \\implies v_{gs} = \\beta v_t$\n* $i_d = g_m \\beta v_t$\n\nThe total current drawn from $v_t$ is:\n$$i_t = \\frac{v_t}{R_L'} + i_d = v_t \\left( \\frac{1}{R_L'} + \\beta g_m \\right)$$\n\n$$R_{\\text{out}} = \\frac{v_t}{i_t} = \\frac{R_L'}{1 + \\beta g_m R_L'}$$\n\n> **Effect of Feedback:** Voltage sampling **decreases** the output impedance by the loop gain factor $(1 + \\beta g_m R_L')$.\n\n---\n\n### **5. Summary Table**\n\n| Parameter | Formula |\n| :--- | :--- |\n| **Topology** | Voltage-Series (Series-Shunt) Negative Feedback |\n| **Feedback Factor ($\\beta$)** | $\\frac{R_2}{R_1 + R_2}$ |\n| **Loaded Drain Resistance ($R_L'$)** | $R_D \\parallel (R_1 + R_2)$ |\n| **Voltage Gain ($A_v$)** | $\\frac{g_m R_L'}{1 + \\beta g_m R_L'} \\approx 1 + \\frac{R_1}{R_2}$ |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\frac{1}{g_m} (1 + \\beta g_m R_L')$ |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\frac{R_L'}{1 + \\beta g_m R_L'}$ |",
        "format": "markdown",
        "sha256": "ea2040ad6ccc6e4727a0fa134ddc566f2246b96ee7e7d73bc42c7d4e363177cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. Its closed-loop gain matches the golden solution; the additional impedance analysis is not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 5949,
        "total_tokens": 7038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 5949,
        "total_tokens": 7038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete analysis of the given MOSFET circuit.\n\n---\n\n### 1. Circuit Topology & Feedback Type\n\n* **Core Stage:** Transistor $M_1$ is an **NMOS transistor** configured as a **Common-Gate (CG)** amplifier core because the input signal ($V_{\\text{in}}$) is applied to the **Source** and the output ($V_{\\text{out}}$) is taken from the **Drain**.\n* **Feedback Configuration:** \n  * **Sampling at Output:** Voltage sampling (the voltage divider $R_1, R_2$ is connected in parallel with the output node $V_{\\text{out}}$).\n  * **Mixing at Input:** Voltage mixing (the feedback voltage $V_F$ is connected to the Gate, modifying $V_{GS} = V_F - V_{\\text{in}}$).\n  * **Feedback Type:** **Voltage-Series (Voltage-Voltage) Negative Feedback**.\n\n---\n\n### 2. Feedback Factor ($\\beta$)\n\n network formed by $R_1$ and $R_2$ sets the gate voltage $V_F$:\n$$V_F = V_{\\text{out}} \\left( \\frac{R_2}{R_1 + R_2} \\right)$$\n\nThus, the feedback factor is:\n$$\\beta = \\frac{R_2}{R_1 + R_2}$$\n\n---\n\n### 3. Small-Signal Voltage Gain ($A_v$)\n\nAssuming channel-length modulation is negligible ($r_o \\to \\infty$), the effective load resistance connected to the drain node is:\n$$R_L' = R_D \\parallel (R_1 + R_2)$$\n\nUsing Kirchhoff's Current Law (KCL) at the output node $V_{\\text{out}}$:\n$$\\frac{V_{\\text{out}}}{R_L'} + i_d = 0$$\n\nWhere the small-signal drain current $i_d$ is:\n$$i_d = g_m v_{gs} = g_m (V_F - V_{\\text{in}}) = g_m (\\beta V_{\\text{out}} - V_{\\text{in}})$$\n\nSubstituting $i_d$ into the KCL equation:\n$$\\frac{V_{\\text{out}}}{R_L'} + g_m (\\beta V_{\\text{out}} - V_{\\text{in}}) = 0$$\n\n$$V_{\\text{out}} \\left( \\frac{1}{R_L'} + g_m \\beta \\right) = g_m V_{\\text{in}}$$\n\nSolving for the closed-loop voltage gain $A_v = \\frac{V_{\\text{out}}}{V_{\\text{in}}}$:\n$$A_v = \\frac{g_m R_L'}{1 + g_m \\beta R_L'}$$\n\n#### **Ideal Closed-Loop Gain (Large Loop-Gain Approximation):**\nIf the loop gain $T = g_m \\beta R_L' \\gg 1$:\n$$A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}$$\n\n> **Key Takeaway:** The closed-loop gain is non-inverting and determined almost entirely by the passive resistor ratio $(1 + R_1/R_2)$, providing high linearity and temperature stability.\n\n---\n\n### 4. Input Resistance ($R_{\\text{in}}$)\n\nThe input current $I_{\\text{in}}$ entering the Source terminal is:\n$$I_{\\text{in}} = -i_d = g_m (V_{\\text{in}} - V_F) = g_m (V_{\\text{in}} - \\beta V_{\\text{out}})$$\n\nSubstitute $V_{\\text{out}} = A_v V_{\\text{in}}$:\n$$I_{\\text{in}} = g_m V_{\\text{in}} \\left( 1 - \\frac{g_m \\beta R_L'}{1 + g_m \\beta R_L'} \\right) = \\frac{g_m V_{\\text{in}}}{1 + g_m \\beta R_L'}$$\n\nThus, the input resistance looking into the source node is:\n$$R_{\\text{in}} = \\frac{V_{\\text{in}}}{I_{\\text{in}}} = \\frac{1}{g_m} \\left( 1 + g_m \\beta R_L' \\right)$$\n\n> **Effect of Feedback:** A standard Common-Gate stage has a low input resistance of $1/g_m$. The series negative feedback **increases** the input resistance by a factor of $(1 + T)$.\n\n---\n\n### 5. Output Resistance ($R_{\\text{out}}$)\n\nTo calculate output resistance, ground the input ($V_{\\text{in}} = 0$) and apply a test voltage $V_x$ at the output node:\n1. $V_F = \\beta V_x$\n2. $v_{gs} = V_F - 0 = \\beta V_x$\n3. $i_d = g_m \\beta V_x$\n\nThe test current drawn from $V_x$ is:\n$$I_x = \\frac{V_x}{R_L'} + g_m \\beta V_x = V_x \\left( \\frac{1}{R_L'} + g_m \\beta \\right)$$\n\nThus, the output resistance is:\n$$R_{\\text{out}} = \\frac{V_x}{I_x} = \\frac{R_L'}{1 + g_m \\beta R_L'}$$\n\n> **Effect of Feedback:** Shunt feedback at the output node **decreases** the output resistance by a factor of $(1 + T)$.\n\n---\n\n### Summary of Performance\n\n| Parameter | Without Feedback ($\\beta = 0$) | With Feedback ($\\beta = \\frac{R_2}{R_1 + R_2}$) |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $g_m R_L'$ | $\\approx 1 + \\frac{R_1}{R_2}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\frac{1}{g_m}$ | $\\frac{1}{g_m}(1 + g_m \\beta R_L')$ (Higher) |\n| **Output Resistance ($R_{\\text{out}}$)** | $R_L'$ | $\\frac{R_L'}{1 + g_m \\beta R_L'}$ (Lower) |",
        "format": "markdown",
        "sha256": "2637475fe25f6cf35ac6452d56a95f3a130308f701cf3077249eaf273524b875"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative feedback, and derives the correct non-inverting closed-loop gain. The additional resistance analysis is not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 5225,
        "total_tokens": 6314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3777,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 5225,
        "total_tokens": 6314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3777,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is an **NMOS Source Follower** (also known as a **Common-Drain Amplifier**) with an active current-source load ($M_2$). \n\nBelow is a detailed analysis of its topology, DC operation, small-signal behavior, and key characteristics.\n\n---\n\n### 1. Circuit Identification & Role of Components\n\n* **$M_1$ (Input Transistor):** Functions as the main amplifying/buffering transistor in a common-drain configuration. \n  * Gate: Input node ($V_{\\text{in}}$)\n  * Drain: Connected to supply voltage ($V_{DD}$)\n  * Source: Output node ($V_{\\text{out}}$)\n* **$M_2$ (Current-Source Load):** Acts as a constant current source biased by a fixed DC voltage $V_b$ applied to its gate.\n* **$V_{\\text{out}}$:** Output voltage taken from the source of $M_1$ (hence \"source follower\").\n\n---\n\n### 2. Large-Signal / DC Analysis\n\n#### A. DC Current\nAssuming $M_2$ operates in the saturation region, the bias current $I_{D}$ flowing through both transistors is set by $M_2$:\n\n$$I_D = I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2 (1 + \\lambda V_{\\text{out}})$$\n\n#### B. DC Output Voltage & Level Shifting\nSince $I_{D1} = I_{D2}$, the output voltage tracks the input voltage shifted down by the gate-to-source voltage $V_{GS1}$:\n\n$$V_{\\text{out}} = V_{\\text{in}} - V_{GS1}$$\n\nwhere:\n\n$$V_{GS1} = V_{TH1} + \\sqrt{\\frac{2 I_D}{\\mu_n C_{ox} (W/L)_1}}$$\n\nThis property allows the source follower to act as a **DC level shifter**.\n\n#### C. Signal Headroom (Voltage Swing Limits)\nFor both transistors to remain in saturation (required for linear operation):\n1. **Lower limit ($M_2$ in saturation):**\n   $$V_{\\text{out}} \\ge V_{DS2,\\text{sat}} = V_b - V_{TH2}$$\n2. **Upper limit ($M_1$ in saturation):**\n   $$V_{DD} - V_{\\text{out}} \\ge V_{GS1} - V_{TH1} \\implies V_{\\text{out}} \\le V_{DD} - V_{DS1,\\text{sat}}$$\n\n---\n\n### 3. Small-Signal Analysis\n\n#### A. Small-Signal Voltage Gain ($A_v$)\nBy writing a Kirchhoff’s Current Law (KCL) equation at the $V_{\\text{out}}$ node:\n\n$$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1} v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1} \\parallel r_{o2}} = 0$$\n\nSolving for $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n\n$$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1} \\parallel r_{o2}}}$$\n\n* **Ideal Case ($r_o \\to \\infty$, no body effect $g_{mb1} = 0$):**\n  $$A_v \\approx 1$$\n* **With Body Effect ($\\eta = g_{mb1} / g_{m1}$):**\n  Assuming $r_{o1} \\parallel r_{o2}$ is large:\n  $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta} < 1$$\n  *(Typically, $A_v \\approx 0.7 - 0.9$ due to the body effect because the source voltage varies while the bulk/substrate is tied to ground).*\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the gate of $M_1$:\n\n$$R_{\\text{in}} = \\infty \\quad \\text{(at low frequencies)}$$\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nTo find $R_{\\text{out}}$, deactivate the input ($v_{\\text{in}} = 0$) and apply a test voltage $v_x$ at the output node:\n\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}}} \\parallel r_{o2}$$\n\nApproximating for high output resistances ($r_{o1}, r_{o2} \\gg 1/g_{m1}$):\n\n$$R_{\\text{out}} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n---\n\n### 4. Summary of Characteristics\n\n| Parameter | Formula / Value | Description |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} < 1$ | Slightly less than unity |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ | Extremely high |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m1} + g_{mb1}}$ | Low |\n| **Phase Shift** | $0^\\circ$ | Non-inverting |\n\n---\n\n### 5. Primary Applications\n1. **Voltage Buffer:** Used to drive low-impedance loads without loading down previous high-impedance gain stages.\n2. **DC Level Shifter:** Used to shift the DC bias voltage of a signal path downward by $V_{GS1}$.",
        "format": "markdown",
        "sha256": "0eaac25b3b040275440be5378106b9e5107c0924dacad81efcc9a13db48aefbe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as its current-source load, and gives the positive, slightly sub-unity gain with body effect and a low output resistance. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 2954,
        "total_tokens": 4065,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1609,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 2954,
        "total_tokens": 4065,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1609,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### **1. Circuit Identification and Overview**\nThe circuit is a **Common-Drain Amplifier**, commonly known as a **Source Follower**, featuring an **NMOS current-source load**:\n* **$M_1$ (Input Driver)**: An NMOS transistor configured in common-drain mode. The input signal $V_{\\text{in}}$ is applied to its gate, its drain is connected to the supply voltage $V_{DD}$, and its source provides the output voltage $V_{\\text{out}}$.\n* **$M_2$ (Active Load)**: An NMOS transistor acting as a constant current source, biased by a constant DC voltage $V_b$ applied to its gate.\n\n---\n\n### **2. DC (Large-Signal) Analysis**\n\n1. **Current Bias**:\n   Assuming $M_2$ is operating in the saturation region, it establishes a constant bias current $I_{D2}$:\n   $$I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2 (1 + \\lambda_2 V_{\\text{out}})$$\n\n2. **Output Voltage Level**:\n   Since the current through $M_1$ equals the current through $M_2$ ($I_{D1} \\approx I_{D2}$):\n   $$V_{\\text{out}} = V_{\\text{in}} - V_{GS1}$$\n   This shows that the output voltage $V_{\\text{out}}$ \"follows\" the input voltage $V_{\\text{in}}$, offset downward by the gate-to-source voltage $V_{GS1}$ of $M_1$.\n\n3. **Operating Region Constraints**:\n   For proper linear operation, both transistors must remain in saturation:\n   * **$M_1$ Saturation condition**: \n     $$V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_{DD} - V_{\\text{out}} \\ge V_{\\text{in}} - V_{\\text{out}} - V_{TH1} \\implies V_{\\text{in}} \\le V_{DD} + V_{TH1}$$\n   * **$M_2$ Saturation condition**: \n     $$V_{\\text{out}} \\ge V_b - V_{TH2}$$\n\n---\n\n### **3. Small-Signal Analysis**\n\n#### **A. Small-Signal Parameters**\n* **Transconductance of $M_1$**: $g_{m1} = \\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 I_D}$\n* **Body Effect Transconductance of $M_1$**: $g_{mb1} = \\eta g_{m1}$ (since the bulk/body of $M_1$ is typically connected to ground, $V_{BS1} \\neq 0$)\n* **Output Resistances**: $r_{o1} = \\frac{1}{\\lambda_1 I_D}$ and $r_{o2} = \\frac{1}{\\lambda_2 I_D}$\n\n---\n\n#### **B. Voltage Gain ($A_v$)**\nApplying Kirchhoff's Current Law (KCL) at the output node $V_{\\text{out}}$:\n\n$$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1} v_{\\text{out}} = \\frac{v_{\\text{out}}}{r_{o1} \\parallel r_{o2}}$$\n\nRearranging for the small-signal voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n\n$$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1} \\parallel r_{o2}}}$$\n\n**Approximations:**\n1. **With Body Effect, ignoring Channel-Length Modulation ($r_o \\to \\infty$):**\n   $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta} < 1$$\n   *(Typically $A_v \\approx 0.7 - 0.85$ due to body effect)*\n\n2. **Ideal Case (No body effect, $g_{mb1} = 0$, and $r_o \\to \\infty$):**\n   $$A_v \\approx 1$$\n\n---\n\n#### **C. Input Impedance ($R_{\\text{in}}$)**\nBecause the input signal is tied directly to the MOSFET gate:\n$$R_{\\text{in}} \\approx \\infty \\quad \\text{(at low frequencies)}$$\n\n---\n\n#### **D. Output Impedance ($R_{\\text{out}}$)**\nTo find $R_{\\text{out}}$, ground $V_{\\text{in}}$ ($v_{\\text{in}} = 0$) and apply a test voltage source $v_t$ at the output node:\n\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}$$\n\n**Approximation:**\n$$R_{\\text{out}} \\approx \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n---\n\n### **4. Key Characteristics & Applications**\n\n| Parameter | Value / Property |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | Slightly less than $1$ ($\\approx 0.8$) |\n| **Input Impedance ($R_{\\text{in}}$)** | Very High ($\\approx \\infty$) |\n| **Output Impedance ($R_{\\text{out}}$)** | Low ($\\approx \\frac{1}{g_{m1}}$) |\n| **Phase Shift** | $0^\\circ$ (Non-inverting) |\n\n#### **Main Applications:**\n* **Voltage Buffer**: Used between a high-impedance stage and a low-resistance load to prevent loading effects.\n* **Level Shifter**: Shifts the DC level of an analog signal down by $V_{GS1}$.",
        "format": "markdown",
        "sha256": "a4172322c3c8d528828dc185d3e3d86ecac7cd08cca515b0cd22eeefb53572a5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, with a positive gain slightly below unity. The gain and output-resistance expressions correctly include body effect and finite output resistances.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 2864,
        "total_tokens": 3975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 2864,
        "total_tokens": 3975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Source Follower** (also known as a **Common-Drain Amplifier**) with an **NMOS current-source load**.\n\n---\n\n### **1. Circuit Identification and Roles**\n\n* **$M_1$ (Driver / Input Transistor):** \n  * Operating in a **common-drain** configuration.\n  * Gate is driven by the AC/DC input signal $V_{\\text{in}}$.\n  * Drain is connected to the supply voltage $V_{DD}$.\n  * Source is connected to the output node $V_{\\text{out}}$.\n\n* **$M_2$ (Current Source Load):**\n  * Gate is connected to a fixed DC bias voltage $V_b$.\n  * Source is grounded ($0\\text{ V}$).\n  * Drain is connected to $V_{\\text{out}}$.\n  * Provides a constant bias current $I_D$ for $M_1$.\n\n---\n\n### **2. Large-Signal / DC Operation**\n\n1. **Bias Current:** \n   Assuming $M_2$ operates in the saturation region, the bias current flowing through both transistors is set by $M_2$:\n   $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2$$\n\n2. **Output Voltage Level:**\n   The output voltage follows the input voltage shifted down by the gate-source voltage of $M_1$:\n   $$V_{\\text{out}} = V_{\\text{in}} - V_{GS1}$$\n\n3. **Input and Output Voltage Swing Limits:**\n   * **Minimum Output Voltage ($V_{\\text{out,min}}$):** To keep $M_2$ in saturation (acting as a proper current source):\n     $$V_{\\text{out,min}} = V_{DS2,\\text{sat}} = V_b - V_{TH2}$$\n   * **Maximum Output Voltage ($V_{\\text{out,max}}$):** To keep $M_1$ in saturation:\n     $$V_{\\text{out,max}} = V_{DD} - V_{DS1,\\text{sat}}$$\n\n---\n\n### **3. Small-Signal Parameters and Performance**\n\n#### **A. Small-Signal Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)**\nApplying Kirchhoff's Current Law (KCL) at the output node $V_{\\text{out}}$:\n\n$$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1} v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1}} - \\frac{v_{\\text{out}}}{r_{o2}} = 0$$\n\nSolving for $A_v$:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}$$\n\nWhere:\n* $g_{m1}$ is the transconductance of $M_1$.\n* $g_{mb1}$ is the body-effect transconductance of $M_1$ (since the bulk of $M_1$ is typically connected to ground while its source is at $V_{\\text{out}}$).\n* $r_{o1}, r_{o2}$ are the output resistances (channel-length modulation) of $M_1$ and $M_2$.\n\n* **Approximations:**\n  * **Neglecting channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$):**\n    $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta} < 1 \\quad \\left(\\text{where } \\eta = \\frac{g_{mb1}}{g_{m1}} \\approx 0.1 - 0.3\\right)$$\n  * **Ideal case (no body effect & infinite $r_o$):**\n    $$A_v \\approx 1$$\n\n---\n\n#### **B. Input Impedance ($R_{\\text{in}}$)**\nSince the input signal connects directly to the insulated gate of $M_1$:\n$$R_{\\text{in}} \\approx \\infty \\quad (\\text{at low frequencies})$$\n\n---\n\n#### **C. Output Impedance ($R_{\\text{out}}$)**\nLooking into the $V_{\\text{out}}$ node with $V_{\\text{in}} = 0$:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\nSince $g_{m1}$ is typically relatively large, $R_{\\text{out}}$ is **low**.\n\n---\n\n### **4. Summary of Key Characteristics & Applications**\n\n| Parameter | Value / Expression |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\approx 1$ (slightly less than 1 due to body effect) |\n| **Input Impedance ($R_{\\text{in}}$)** | Very High ($\\infty$) |\n| **Output Impedance ($R_{\\text{out}}$)** | Low ($\\approx \\frac{1}{g_{m1}}$) |\n| **Phase Shift** | $0^\\circ$ (Non-inverting) |\n\n**Primary Applications:**\n1. **Voltage Buffer:** Used to drive low-resistance loads without loading down previous high-impedance stages.\n2. **DC Level Shifter:** Shifts the DC bias level down by $V_{GS1}$.",
        "format": "markdown",
        "sha256": "cd0a0a3ba83646d018d36911fdb12ba663a108e94308b63d46a9b0254abe64c9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, with a positive gain below unity. The gain expression and low-output-resistance result are also consistent with the topology.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3260,
        "total_tokens": 4371,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1960,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3260,
        "total_tokens": 4371,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1960,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Complementary Metal-Oxide-Semiconductor (CMOS) Inverter**, which is the fundamental building block of digital integrated circuits and can also be operated as a high-gain **Push-Pull Common-Source Amplifier** in analog design.\n\n---\n\n### **1. Circuit Components & Topology**\n* **$M_1$ (Bottom):** N-channel MOSFET (NMOS).\n  * **Gate:** Connected to input terminal $V_{\\text{in}}$\n  * **Source:** Connected to Ground ($0\\text{ V}$)\n  * **Drain:** Connected to output terminal $V_{\\text{out}}$\n* **$M_2$ (Top):** P-channel MOSFET (PMOS).\n  * **Gate:** Connected to input terminal $V_{\\text{in}}$\n  * **Source:** Connected to supply voltage $V_{DD}$\n  * **Drain:** Connected to output terminal $V_{\\text{out}}$\n\n---\n\n### **2. Digital Operation (Large-Signal Analysis)**\n\nThe circuit functions as a digital **NOT gate** (Inverter):\n\n1. **Logic LOW Input ($V_{\\text{in}} = 0\\text{ V}$):**\n   * **NMOS ($M_1$):** $V_{GS1} = 0\\text{ V} < V_{TH,n} \\implies \\boldsymbol{M_1 \\text{ is OFF}}$ (Cutoff).\n   * **PMOS ($M_2$):** $V_{SG2} = V_{DD} > |V_{TH,p}| \\implies \\boldsymbol{M_2 \\text{ is ON}}$ (Triode/Linear mode).\n   * **Output:** $M_2$ pulls the output all the way up to $V_{DD}$.\n   $$\\mathbf{V_{\\text{out}} = V_{DD} \\quad (\\text{Logic HIGH})}$$\n\n2. **Logic HIGH Input ($V_{\\text{in}} = V_{DD}$):**\n   * **NMOS ($M_1$):** $V_{GS1} = V_{DD} > V_{TH,n} \\implies \\boldsymbol{M_1 \\text{ is ON}}$ (Triode/Linear mode).\n   * **PMOS ($M_2$):** $V_{SG2} = 0\\text{ V} < |V_{TH,p}| \\implies \\boldsymbol{M_2 \\text{ is OFF}}$ (Cutoff).\n   * **Output:** $M_1$ pulls the output down to Ground.\n   $$\\mathbf{V_{\\text{out}} = 0\\text{ V} \\quad (\\text{Logic LOW})}$$\n\n---\n\n### **3. Voltage Transfer Characteristic (VTC)**\n\nThe input-output relationship across the full voltage range is divided into 5 regions:\n\n| Region | Input Range ($V_{\\text{in}}$) | $M_1$ (NMOS) State | $M_2$ (PMOS) State | Output ($V_{\\text{out}}$) |\n| :---: | :---: | :---: | :---: | :---: |\n| **I** | $0 \\le V_{\\text{in}} < V_{TH,n}$ | Cutoff (OFF) | Triode (ON) | $V_{DD}$ |\n| **II** | $V_{TH,n} \\le V_{\\text{in}} < V_M$ | Saturation | Triode | Decreasing from $V_{DD}$ |\n| **III** | $V_{\\text{in}} = V_M \\approx \\frac{V_{DD}}{2}$ | **Saturation** | **Saturation** | High slope (Transition Region) |\n| **IV** | $V_M < V_{\\text{in}} \\le V_{DD} - |V_{TH,p}|$ | Triode | Saturation | Approaching Ground |\n| **V** | $V_{DD} - |V_{TH,p}| < V_{\\text{in}} \\le V_{DD}$ | Triode (ON) | Cutoff (OFF) | $0\\text{ V}$ |\n\n* **Inverter Switching Threshold ($V_M$):** The point where $V_{\\text{in}} = V_{\\text{out}}$. When matched ($\\mu_n C_{ox} (W/L)_1 = \\mu_p C_{ox} (W/L)_2$), $V_M \\approx \\frac{V_{DD}}{2}$.\n\n---\n\n### **4. Analog Operation (Small-Signal Analysis)**\n\nWhen biased in **Region III** (mid-supply voltage), both transistors operate in the **saturation region**, allowing the inverter to act as a **push-pull small-signal amplifier**.\n\n1. **Transconductance ($g_m$):**\n   Both transistors contribute constructively to driving the output node:\n   $$g_{m1} = \\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 I_D}$$\n   $$g_{m2} = \\sqrt{2 \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 I_D}$$\n\n2. **Output Resistance ($R_{\\text{out}}$):**\n   Looking into the output node, the small-signal channel-length modulation resistances of both transistors appear in parallel:\n   $$R_{\\text{out}} = r_{o1} \\parallel r_{o2} = \\frac{1}{g_{ds1} + g_{ds2}}$$\n\n3. **Small-Signal Voltage Gain ($A_v$):**\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2}) = -\\frac{g_{m1} + g_{m2}}{g_{ds1} + g_{ds2}}$$\n\n---\n\n### **5. Key Characteristics & Summary**\n\n* **High Input Impedance:** $R_{\\text{in}} = \\infty$ at DC (insulated MOS gates).\n* **Rail-to-Rail Output Swing:** Output swings fully from $0\\text{ V}$ to $V_{DD}$.\n* **Zero Static Power Dissipation:** In steady state ($V_{\\text{in}} = 0$ or $V_{DD}$), one transistor is always completely off, resulting in zero static DC current draw (ignoring subthreshold leakage).\n* **Push-Pull Advantage:** In analog mode, both $M_1$ and $M_2$ actively amplify the signal, providing higher gain ($g_{m1} + g_{m2}$) compared to a single-transistor amplifier with a passive load.",
        "format": "markdown",
        "sha256": "87807ac2571261ac649f36fce6166186b0d7013384f0d09beb7d2db7034e031d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down/PMOS pull-up, and describes the inversion correctly. The optional analog analysis is consistent with the golden solution; minor idealizations do not contradict the inverter’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 4718,
        "total_tokens": 5829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 4718,
        "total_tokens": 5829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a classic **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor Inverter), consisting of an **NMOS transistor ($M_1$)** at the bottom (pull-down) and a **PMOS transistor ($M_2$)** at the top (pull-up). \n\nIt can be analyzed from two primary perspectives: **Digital Logic Gate** and **Analog Amplifier**.\n\n---\n\n### 1. Circuit Topology & Identification\n* **$M_1$ (NMOS):** Source tied to Ground ($0\\text{ V}$), Drain connected to $V_{\\text{out}}$, Gate connected to $V_{\\text{in}}$.\n* **$M_2$ (PMOS):** Source tied to $V_{DD}$, Drain connected to $V_{\\text{out}}$, Gate connected to $V_{\\text{in}}$.\n\n---\n\n### 2. Digital Operation (Logic Inverter)\n\nIn digital applications, the circuit operates as a **NOT gate** (inverter):\n\n1. **Input LOW ($V_{\\text{in}} = 0\\text{ V}$ / Logic 0):**\n   * **$M_1$ (NMOS):** $V_{GS1} = 0 < V_{\\text{TH,n}} \\implies$ **OFF (Cutoff)**.\n   * **$M_2$ (PMOS):** $|V_{GS2}| = V_{DD} > |V_{\\text{TH,p}}| \\implies$ **ON (Triode/Linear)**.\n   * **Output:** $V_{\\text{out}} = V_{DD}$ (Logic 1 / HIGH).\n\n2. **Input HIGH ($V_{\\text{in}} = V_{DD}$ / Logic 1):**\n   * **$M_1$ (NMOS):** $V_{GS1} = V_{DD} > V_{\\text{TH,n}} \\implies$ **ON (Triode/Linear)**.\n   * **$M_2$ (PMOS):** $|V_{GS2}| = 0 < |V_{\\text{TH,p}}| \\implies$ **OFF (Cutoff)**.\n   * **Output:** $V_{\\text{out}} = 0\\text{ V}$ (Logic 0 / LOW).\n\n#### Key Digital Characteristics:\n* **Rail-to-Rail Swing:** The output swings fully from $0\\text{ V}$ to $V_{DD}$.\n* **Zero Static Power Dissipation:** In steady state ($V_{\\text{in}} = 0$ or $V_{DD}$), one transistor is always turned completely OFF, resulting in virtually zero DC current from $V_{DD}$ to Ground (ignoring subthreshold leakage).\n* **Dynamic Power Dissipation:** Power is consumed only during switching transitions to charge/discharge the load capacitance:\n  $$P_{\\text{dynamic}} = f \\cdot C_L \\cdot V_{DD}^2$$\n\n---\n\n### 3. Analog Operation (Inverting Amplifier)\n\nWhen biased in the transition region ($V_{\\text{in}} \\approx V_{DD}/2$), both transistors operate in **saturation**, and the CMOS inverter acts as a high-gain push-pull **inverting amplifier**.\n\n#### A. Small-Signal Voltage Gain ($A_v$)\nIn saturation, both $M_1$ and $M_2$ provide transconductance to drive the output node in parallel:\n* $M_1$ small-signal drain current: $i_{d1} = g_{m1} v_{\\text{in}}$\n* $M_2$ small-signal drain current: $i_{d2} = g_{m2} v_{\\text{in}}$\n* Total output resistance: $R_{\\text{out}} = r_{o1} \\parallel r_{o2}$\n\nThe small-signal voltage gain is:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2}) = -\\frac{g_{m1} + g_{m2}}{g_{ds1} + g_{ds2}}$$\n\nWhere:\n* $g_{m1}, g_{m2}$ are the transconductances of $M_1$ and $M_2$.\n* $r_{o1}, r_{o2}$ are the small-signal output resistances due to channel-length modulation ($\\lambda$).\n\n#### B. Input and Output Impedance\n* **Input Impedance ($R_{\\text{in}}$):** Infinite at DC ($\\approx \\infty$) because the input connects directly to insulated MOSFET gates ($C_{\\text{in}} = C_{gg1} + C_{gg2}$).\n* **Output Impedance ($R_{\\text{out}}$):** \n  $$R_{\\text{out}} = r_{o1} \\parallel r_{o2} = \\frac{1}{\\lambda_1 I_D + \\lambda_2 I_D}$$\n\n---\n\n### 4. Voltage Transfer Characteristic (VTC) Regions\n\nAs $V_{\\text{in}}$ sweeps from $0$ to $V_{DD}$, the circuit moves through 5 operating regions:\n\n| Region | Input Voltage ($V_{\\text{in}}$) | $M_1$ (NMOS) Mode | $M_2$ (PMOS) Mode | Output Voltage ($V_{\\text{out}}$) |\n|:---:|:---:|:---:|:---:|:---:|\n| **I** | $0 \\le V_{\\text{in}} < V_{\\text{TH,n}}$ | Cutoff (OFF) | Triode/Linear | $V_{DD}$ |\n| **II** | $V_{\\text{TH,n}} \\le V_{\\text{in}} < V_M$ | Saturation | Triode/Linear | Drops slightly below $V_{DD}$ |\n| **III** | $V_{\\text{in}} \\approx V_M \\approx \\frac{V_{DD}}{2}$ | **Saturation** | **Saturation** | **Steep drop (Max Gain $A_v$)** |\n| **IV** | $V_M < V_{\\text{in}} \\le V_{DD} - \\vert V_{\\text{TH,p}}\\vert$ | Triode/Linear | Saturation | Near $0\\text{ V}$ |\n| **V** | $V_{DD} - \\vert V_{\\text{TH,p}}\\vert < V_{\\text{in}} \\le V_{DD}$ | Triode/Linear | Cutoff (OFF) | $0\\text{ V}$ |\n\n*(Here, $V_M$ is the switching threshold voltage where $V_{\\text{in}} = V_{\\text{out}}$).*\n\n---\n\n### Summary\n* **As a digital circuit:** It functions as a **CMOS logic inverter** with zero static power, full rail-to-rail voltage swing, and high noise margins.\n* **As an analog circuit:** It functions as an **inverting amplifier** with high voltage gain $A_v = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$ and nearly infinite input resistance.",
        "format": "markdown",
        "sha256": "39517acd7a4415ebe0caff35f1649f0c2216b26a8d11eba49fa8bde065b742a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up. Its description of inverter operation is consistent with the circuit; the additional analog analysis is not required for full credit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 4109,
        "total_tokens": 5220,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2531,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 4109,
        "total_tokens": 5220,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2531,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **standard CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**. It is the fundamental building block of digital CMOS integrated circuits, and it can also function as a high-gain complementary common-source amplifier when biased in its linear/active region.\n\n---\n\n### 1. Circuit Component Identification\n\n* **$M_1$ (NMOS Transistor):** Positioned at the bottom (pull-down network). Its source is connected to Ground ($0\\text{ V}$), gate to $V_{\\text{in}}$, and drain to $V_{\\text{out}}$.\n* **$M_2$ (PMOS Transistor):** Positioned at the top (pull-up network). Its source is connected to supply voltage $V_{DD}$, gate to $V_{\\text{in}}$, and drain to $V_{\\text{out}}$.\n* **$V_{\\text{in}}$:** Common input signal connected to both transistor gates.\n* **$V_{\\text{out}}$:** Common output signal connected to both transistor drains.\n\n---\n\n### 2. Digital Operation & Voltage Transfer Characteristic (VTC)\n\nThe CMOS inverter acts as a digital **NOT gate**. Its operating state depends on the input voltage $V_{\\text{in}}$ relative to the threshold voltages of the transistors ($V_{tN}$ for NMOS and $V_{tP}$ for PMOS):\n\n1. **Logic LOW Input ($V_{\\text{in}} < V_{tN}$):**\n   * **$M_1$ (NMOS):** Cut-off / OFF ($V_{GS1} < V_{tN}$).\n   * **$M_2$ (PMOS):** ON in the triode/linear region ($V_{SG2} > |V_{tP}|$).\n   * **Output:** $V_{\\text{out}} = V_{DD}$ (**Logic HIGH**).\n   * **Static Current:** $I_D = 0$ (negligible leakage current).\n\n2. **Transition / Switching Region ($V_{tN} \\le V_{\\text{in}} \\le V_{DD} - |V_{tP}|$):**\n   * Both $M_1$ and $M_2$ conduct simultaneously.\n   * Around the switching threshold $V_M \\approx \\frac{V_{DD}}{2}$, both transistors enter the **Saturation region**.\n   * A short-circuit current flows from $V_{DD}$ to Ground, peaking at $V_{\\text{in}} = V_M$.\n\n3. **Logic HIGH Input ($V_{\\text{in}} > V_{DD} - |V_{tP}|$):**\n   * **$M_1$ (NMOS):** ON in the triode/linear region ($V_{GS1} > V_{tN}$).\n   * **$M_2$ (PMOS):** Cut-off / OFF ($V_{SG2} < |V_{tP}|$).\n   * **Output:** $V_{\\text{out}} = 0\\text{ V}$ (**Logic LOW**).\n   * **Static Current:** $I_D = 0$.\n\n---\n\n### 3. Small-Signal Analog Analysis (Complementary CS Amplifier)\n\nWhen biased around $V_{\\text{in}} = V_M$, both transistors operate in saturation, making the circuit function as a **push-pull small-signal amplifier**:\n\n* **Small-Signal Voltage Gain ($A_v$):**\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$$\n  * $g_{m1}, g_{m2}$: Transconductances of $M_1$ and $M_2$.\n  * $r_{o1}, r_{o2}$: Output resistances due to channel-length modulation ($\\lambda$).\n\n* **Input Impedance ($R_{\\text{in}}$):** Extremely high ($R_{\\text{in}} \\approx \\infty$) at low frequencies due to the insulated MOSFET gates.\n* **Output Impedance ($R_{\\text{out}}$):** \n  $$R_{\\text{out}} = r_{o1} \\parallel r_{o2}$$\n\n---\n\n### 4. Key Advantages of the CMOS Inverter\n\n1. **Rail-to-Rail Output Swing:** Full dynamic range between $0\\text{ V}$ and $V_{DD}$.\n2. **Zero Static Power Dissipation:** In steady logic states ($0$ or $1$), one transistor is completely OFF, so no static DC current flows. Power is consumed only dynamically during transitions ($P_{\\text{dynamic}} = f \\cdot C_L \\cdot V_{DD}^2$).\n3. **High Input Impedance & High Noise Margins:** Ideal for driving capacitive loads and cascading multiple digital logic stages.",
        "format": "markdown",
        "sha256": "06d071944b6d14b2d36fc314b7bf165e0e433bf5724d005484cc067e22a95a2b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up. The optional small-signal analysis is also consistent with inverter operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3219,
        "total_tokens": 4330,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3219,
        "total_tokens": 4330,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed analysis of the given MOSFET amplifier circuit.\n\n---\n\n### **1. Circuit Identification and Topology**\n\nThe circuit consists of two N-channel MOSFETs ($M_1$ and $M_2$) with their gates tied together to the input signal $V_{\\text{in}}$:\n\n* **$M_1$ (Top NMOS):** Connected in a **Common-Drain (Source-Follower)** configuration. \n  * Drain is connected to $V_{DD}$ (AC ground).\n  * Gate is connected to $V_{\\text{in}}$.\n  * Source is connected to $V_{\\text{out}}$.\n* **$M_2$ (Bottom NMOS):** Connected in a **Common-Source** configuration.\n  * Source is connected to Ground.\n  * Gate is connected to $V_{\\text{in}}$.\n  * Drain is connected to $V_{\\text{out}}$.\n\n---\n\n### **2. Large-Signal (DC) Analysis**\n\nAssuming both transistors operate in the **saturation region**:\n\n1. **Current Equation for $M_1$:**\n   $$I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{\\text{out}} - V_{TH1})^2$$\n\n2. **Current Equation for $M_2$:**\n   $$I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{\\text{in}} - V_{TH2})^2$$\n\nAt DC equilibrium (with no external load current), $I_{D1} = I_{D2}$. Assuming equal threshold voltages ($V_{TH1} = V_{TH2} = V_{TH}$):\n\n$$\\sqrt{\\left(\\frac{W}{L}\\right)_1} (V_{\\text{in}} - V_{\\text{out}} - V_{TH}) = \\sqrt{\\left(\\frac{W}{L}\\right)_2} (V_{\\text{in}} - V_{TH})$$\n\nSolving for $V_{\\text{out}}$:\n$$V_{\\text{out}} = (V_{\\text{in}} - V_{TH}) \\left[ 1 - \\sqrt{\\frac{(W/L)_2}{(W/L)_1}} \\right]$$\n\n---\n\n### **3. Small-Signal Analysis**\n\nTo find the small-signal voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n\n1. **Small-signal current through $M_1$ (flowing into $V_{\\text{out}}$ node):**\n   $$i_{d1} = g_{m1} (v_{\\text{in}} - v_{\\text{out}}) - g_{mb1} v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1}}$$\n   *(where $g_{mb1}$ accounts for the body effect of $M_1$, as its source is not grounded)*\n\n2. **Small-signal current through $M_2$ (flowing out of $V_{\\text{out}}$ node):**\n   $$i_{d2} = g_{m2} v_{\\text{in}} + \\frac{v_{\\text{out}}}{r_{o2}}$$\n\n3. **Applying Kirchhoff’s Current Law (KCL) at the output node ($i_{d1} = i_{d2}$):**\n   $$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1} v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1}} = g_{m2} v_{\\text{in}} + \\frac{v_{\\text{out}}}{r_{o2}}$$\n\n4. **Grouping terms for $v_{\\text{in}}$ and $v_{\\text{out}}$:**\n   $$(g_{m1} - g_{m2}) v_{\\text{in}} = \\left( g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}} \\right) v_{\\text{out}}$$\n\n5. **Voltage Gain ($A_v$):**\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1} \\parallel r_{o2}}}$$\n\n---\n\n### **4. Key Gain Insights (Ideal Case)**\n\nNeglecting channel-length modulation ($r_o \\to \\infty$) and body effect ($g_{mb1} = 0$):\n\n$$A_v \\approx \\frac{g_{m1} - g_{m2}}{g_{m1}} = 1 - \\frac{g_{m2}}{g_{m1}} = 1 - \\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n* **If $(W/L)_1 > (W/L)_2$ ($g_{m1} > g_{m2}$):** The gain is **positive** ($0 < A_v < 1$). The circuit behaves like an attenuated source follower.\n* **If $(W/L)_1 = (W/L)_2$ ($g_{m1} = g_{m2}$):** The gain is **zero** ($A_v = 0$). The pull-up action of $M_1$ and pull-down action of $M_2$ cancel each other out.\n* **If $(W/L)_1 < (W/L)_2$ ($g_{m1} < g_{m2}$):** The gain becomes **negative** ($A_v < 0$). The common-source behavior of $M_2$ dominates, resulting in phase inversion.\n\n---\n\n### **5. Input and Output Impedances**\n\n* **Input Impedance ($R_{\\text{in}}$):** \n  $$R_{\\text{in}} \\to \\infty$$\n  (Since the input connects directly to the insulated gates of the MOSFETs).\n\n* **Output Impedance ($R_{\\text{out}}$):** \n  Deactivating the input ($v_{\\text{in}} = 0$) and applying a test voltage $v_t$ at the output node:\n  $$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1} \\parallel r_{o2}}} \\approx \\frac{1}{g_{m1}}$$\n  The output resistance is **low**, driven primarily by the transconductance of the source follower $M_1$.",
        "format": "markdown",
        "sha256": "6c7db515b508aca3cecc60c500698c47297ac4e79d1201c568d237a8218e1882"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies both NMOS devices and their source-follower and pull-down roles, but incorrectly assumes both are in saturation. The lower NMOS operates in triode while the upper conducts, so the claimed size-dependent zero or negative gain is wrong; the circuit is a non-inverting attenuator, not a normal CMOS inverter.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 4427,
        "total_tokens": 5528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 4427,
        "total_tokens": 5528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is the detailed small-signal and large-signal analysis of the given MOS circuit.\n\n---\n\n### **1. Circuit Identification**\nThe circuit consists of two **NMOS transistors**, $M_1$ and $M_2$, driven by the same input voltage $V_{\\text{in}}$:\n\n* **$M_1$ (Top Transistor):** Configured as a **Source Follower (Common-Drain)** amplifier.\n  * Drain $\\rightarrow V_{DD}$\n  * Gate $\\rightarrow V_{\\text{in}}$\n  * Source $\\rightarrow V_{\\text{out}}$\n* **$M_2$ (Bottom Transistor):** Configured as a **Common-Source** amplifier.\n  * Drain $\\rightarrow V_{\\text{out}}$\n  * Gate $\\rightarrow V_{\\text{in}}$\n  * Source $\\rightarrow \\text{Ground}$\n\n---\n\n### **2. Qualitative / Large-Signal Operation**\n* As $V_{\\text{in}}$ increases:\n  * $M_1$ acts as a source follower, attempting to pull $V_{\\text{out}}$ **up** ($V_{\\text{out}} \\approx V_{\\text{in}} - V_{\\text{TH1}}$).\n  * $M_2$ turns on stronger, drawing more current and attempting to pull $V_{\\text{out}}$ **down** toward Ground.\n* Because both transistors are driven by the same input $V_{\\text{in}}$, their actions oppose each other. The final output voltage behavior depends on the relative transconductances ($g_{m1}$ vs. $g_{m2}$) of the two transistors.\n\n---\n\n### **3. Small-Signal Voltage Gain ($A_v$)**\n\nUsing the small-signal equivalent model:\n\n1. **Current for $M_1$ (flowing down into $V_{\\text{out}}$):**\n   $$v_{gs1} = v_{\\text{in}} - v_{\\text{out}}$$\n   $$v_{bs1} = -v_{\\text{out}} \\quad (\\text{assuming body/bulk connected to ground})$$\n   $$v_{ds1} = -v_{\\text{out}} \\quad (\\text{drain is AC ground})$$\n   $$i_{d1} = g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1}v_{\\text{out}} - g_{o1}v_{\\text{out}}$$\n   *(where $g_{o1} = 1/r_{o1}$)*\n\n2. **Current for $M_2$ (flowing down into Ground):**\n   $$v_{gs2} = v_{\\text{in}}$$\n   $$v_{ds2} = v_{\\text{out}}$$\n   $$i_{d2} = g_{m2}v_{\\text{in}} + g_{o2}v_{\\text{out}}$$\n   *(where $g_{o2} = 1/r_{o2}$)*\n\n3. **Applying Kirchhoff's Current Law (KCL) at node $V_{\\text{out}}$ ($i_{d1} = i_{d2}$):**\n   $$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - (g_{mb1} + g_{o1})v_{\\text{out}} = g_{m2}v_{\\text{in}} + g_{o2}v_{\\text{out}}$$\n\n4. **Rearranging terms:**\n   $$(g_{m1} - g_{m2}) v_{\\text{in}} = (g_{m1} + g_{mb1} + g_{o1} + g_{o2}) v_{\\text{out}}$$\n\n5. **Small-Signal Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$):**\n   $$\\mathbf{A_v = \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}}}$$\n\n---\n\n### **Key Gain Observations**\n\n* **If $g_{m1} = g_{m2}$:** The overall small-signal gain is **zero** ($A_v = 0$).\n* **If $g_{m1} > g_{m2}$:** The gain is **non-inverting** ($A_v > 0$), but always bounded by $A_v < 1$.\n* **If $g_{m2} > g_{m1}$:** The gain is **inverting** ($A_v < 0$).\n* **Neglecting channel-length modulation ($r_{o1}, r_{o2} \\rightarrow \\infty$) and body effect ($g_{mb1} = 0$):**\n  $$A_v \\approx 1 - \\frac{g_{m2}}{g_{m1}}$$\n\n---\n\n### **4. Input and Output Impedance**\n\n1. **Input Impedance ($R_{\\text{in}}$):**\n   Since the input connects directly to the insulated MOSFET gates:\n   $$R_{\\text{in}} = \\infty \\quad (\\text{at DC / low frequency})$$\n\n2. **Output Impedance ($R_{\\text{out}}$):**\n   Setting $v_{\\text{in}} = 0$ and applying a test voltage $v_t$ at the output node:\n   $$i_t = (g_{m1} + g_{mb1} + g_{o1} + g_{o2}) v_t$$\n   $$\\mathbf{R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}} \\approx \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2}}$$\n\n---\n\n### **Summary Table**\n\n| Parameter | Formula |\n| :--- | :--- |\n| **Small-Signal Voltage Gain ($A_v$)** | $\\dfrac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}}$ |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\dfrac{1}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}}$ |",
        "format": "markdown",
        "sha256": "72e28ba3b7d36e6a5588ed9851da861739cfe101b062e4e691cafc18ffaf42ff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies both devices as NMOS and the upper source-follower/lower pull-down actions, but it incorrectly claims the gain can become negative when the lower device's transconductance is larger. The circuit's gain remains positive in the stated operating regime, so the answer misses the key non-inverting behavior and does not clearly conclude that it is not a normal CMOS inverter.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 5376,
        "total_tokens": 6477,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3944,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 5376,
        "total_tokens": 6477,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3944,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed analysis of the given MOSFET circuit.\n\n---\n\n### 1. Circuit Overview and Identification\n\n* **Transistor Types:** Both $M_1$ and $M_2$ are **N-channel MOSFETs (NMOS)**, as indicated by the arrows pointing outward on their source terminals.\n* **Topology:**\n  * **$M_1$ (Top NMOS):** Configured as a **Source Follower (Common-Drain)**. Its drain is connected to $V_{DD}$, gate to $V_{\\text{in}}$, and source to $V_{\\text{out}}$.\n  * **$M_2$ (Bottom NMOS):** Configured as a **Common-Source** amplifier. Its drain is connected to $V_{\\text{out}}$, gate to $V_{\\text{in}}$, and source to Ground.\n* **Input/Output Connections:** \n  * The input $V_{\\text{in}}$ drives the gates of **both** transistors simultaneously.\n  * The output $V_{\\text{out}}$ is taken at the node between $M_1$'s source and $M_2$'s drain.\n\n---\n\n### 2. Large-Signal / DC Operating Conditions\n\nTo understand the DC behavior, let $V_{TH1}$ and $V_{TH2}$ be the threshold voltages of $M_1$ and $M_2$:\n\n1. **Gate-to-Source Voltages:**\n   $$V_{GS1} = V_{\\text{in}} - V_{\\text{out}}$$\n   $$V_{GS2} = V_{\\text{in}}$$\n\n2. **Saturation Conditions:**\n   * For $M_1$ to be in saturation: \n     $$V_{GS1} \\ge V_{TH1} \\implies V_{\\text{out}} \\le V_{\\text{in}} - V_{TH1}$$\n   * For $M_2$ to be in saturation: \n     $$V_{DS2} \\ge V_{GS2} - V_{TH2} \\implies V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH2}$$\n\n3. **Conflict in Simultaneous Saturation:**\n   If $V_{TH1} \\approx V_{TH2} = V_{TH}$, then for both to be in saturation:\n   $$V_{\\text{in}} - V_{TH} \\le V_{\\text{out}} \\le V_{\\text{in}} - V_{TH}$$\n   This requires $V_{\\text{out}} = V_{\\text{in}} - V_{TH}$, which means $V_{GS1} = V_{TH}$. At this point, $M_1$ carries zero current. \n   \n   **Conclusion:** **Both transistors cannot simultaneously operate deep in saturation with non-zero current.** Depending on the sizing $(W/L)_1$ and $(W/L)_2$, $M_2$ is typically driven into the **triode (linear) region** while $M_1$ remains in saturation (or vice-versa).\n\n---\n\n### 3. Small-Signal Analysis & Voltage Gain\n\nAssuming both transistors are biased such that they have small-signal transconductances $g_{m1}$ and $g_{m2}$, output conductances $g_{o1} = 1/r_{o1}$ and $g_{o2} = 1/r_{o2}$, and body-effect transconductance $g_{mb1}$ for $M_1$:\n\n#### **KCL at the Output Node ($V_{\\text{out}}$):**\nThe small-signal current exiting $M_1$'s source into the node must equal the current entering $M_2$'s drain:\n\n$$i_{d1} = g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1}v_{\\text{out}} - g_{o1}v_{\\text{out}}$$\n$$i_{d2} = g_{m2}v_{\\text{in}} + g_{o2}v_{\\text{out}}$$\n\nSetting $i_{d1} = i_{d2}$:\n$$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1}v_{\\text{out}} - g_{o1}v_{\\text{out}} = g_{m2}v_{\\text{in}} + g_{o2}v_{\\text{out}}$$\n\nRearranging terms to isolate $v_{\\text{out}}$ and $v_{\\text{in}}$:\n$$(g_{m1} - g_{m2}) v_{\\text{in}} = (g_{m1} + g_{mb1} + g_{o1} + g_{o2}) v_{\\text{out}}$$\n\n#### **Small-Signal Voltage Gain ($A_v$):**\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}}$$\n\n#### **Ideal / Simplified Gain (Neglecting Body Effect & Channel-Length Modulation):**\nIf $g_{o1}, g_{o2}, g_{mb1} \\ll g_{m1}$:\n$$A_v \\approx \\frac{g_{m1} - g_{m2}}{g_{m1}} = 1 - \\frac{g_{m2}}{g_{m1}}$$\n\n---\n\n### 4. Input and Output Impedance\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  Since the input connects only to the insulated oxide gates of $M_1$ and $M_2$:\n  $$R_{\\text{in}} \\to \\infty \\quad \\text{(at low frequencies)}$$\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  To find $R_{\\text{out}}$, set $v_{\\text{in}} = 0$ and apply a test voltage $v_x$ at the output node:\n  * $v_{gs1} = -v_x \\implies i_1 = (g_{m1} + g_{mb1} + g_{o1})v_x$\n  * $v_{gs2} = 0 \\implies i_2 = g_{o2}v_x$\n\n  $$R_{\\text{out}} = \\frac{v_x}{i_x} = \\frac{1}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}} \\approx \\frac{1}{g_{m1}}$$\n\n---\n\n### 5. Summary of Circuit Characteristics\n\n1. **Gain Behavior:**\n   * If $g_{m1} > g_{m2}$: Gain is positive and less than 1 ($0 < A_v < 1$).\n   * If $g_{m1} = g_{m2}$: Small-signal gain is approximately $0$.\n   * If $g_{m1} < g_{m2}$: Gain becomes inverting ($A_v < 0$).\n2. **Output Impedance:** Retains a low output impedance ($\\approx 1/g_{m1}$), typical of a source follower.\n3. **Key Limitation:** Hard to keep both devices in saturation due to the shared gate control and threshold voltage constraints.",
        "format": "markdown",
        "sha256": "fdd5bdb1ec3402b313c98c3648b915299be7b866af99349af18f7e427458e2bb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies both devices as NMOS and the upper source follower with a grounded lower pull-down, establishing that this is not a normal complementary CMOS inverter. The optional gain analysis is not required for full credit.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 6530,
        "total_tokens": 7631,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4910,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 6530,
        "total_tokens": 7631,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4910,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Common-Source (CS) Amplifier with a Diode-Connected PMOS Load**. \n\nHere is a comprehensive step-by-step analysis of the circuit:\n\n---\n\n### 1. Circuit Topology & Component Roles\n\n* **$M_1$ (NMOS Transistor):** Acts as the **input driver** (amplifying transistor). \n  * **Gate:** Connected to the input voltage $V_{\\text{in}}$.\n  * **Source:** Connected to Ground ($0\\text{ V}$).\n  * **Drain:** Connected to the output node $V_{\\text{out}}$.\n* **$M_2$ (PMOS Transistor):** Acts as a **diode-connected active load**.\n  * **Source:** Connected to $V_{DD}$.\n  * **Gate & Drain:** Tied together and connected to the output node $V_{\\text{out}}$.\n  * Because its gate is connected to its drain, $M_2$ operates in the **saturation region** as long as $V_{DD} - V_{\\text{out}} > |V_{TH2}|$.\n\n---\n\n### 2. Large-Signal (DC) Transfer Characteristics\n\nAssuming both transistors are operating in the **saturation region** (and ignoring channel-length modulation $\\lambda = 0$):\n\n1. **Drain Current of $M_1$ (NMOS):**\n   $$I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH1})^2$$\n\n2. **Drain Current of $M_2$ (PMOS):**\n   $$I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{out}} - |V_{TH2}|)^2$$\n\nSince the transistors are in series, $I_{D1} = I_{D2}$:\n$$\\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH1})^2 = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{out}} - |V_{TH2}|)^2$$\n\nTaking the square root on both sides:\n$$\\sqrt{\\mu_n \\left(\\frac{W}{L}\\right)_1} (V_{\\text{in}} - V_{TH1}) = \\sqrt{\\mu_p \\left(\\frac{W}{L}\\right)_2} (V_{DD} - V_{\\text{out}} - |V_{TH2}|)$$\n\nSolving for $V_{\\text{out}}$ gives the DC transfer function:\n$$V_{\\text{out}} = V_{DD} - |V_{TH2}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} (V_{\\text{in}} - V_{TH1})$$\n\n> **Key Observation:** The DC relationship between $V_{\\text{in}}$ and $V_{\\text{out}}$ is **linear** when both transistors are in saturation, making this topology exceptionally linear compared to standard active-load amplifiers.\n\n---\n\n### 3. Small-Signal Voltage Gain ($A_v$)\n\n#### Ideal Case ($\\lambda = 0$, Body Effect ignored):\nDifferentiating $V_{\\text{out}}$ with respect to $V_{\\text{in}}$:\n\n$$A_v = \\frac{dV_{\\text{out}}}{dV_{\\text{in}}} = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} = -\\frac{g_{m1}}{g_{m2}}$$\n\nWhere:\n* $g_{m1} = \\sqrt{2 \\mu_n C_{ox} (W/L)_1 I_D}$\n* $g_{m2} = \\sqrt{2 \\mu_p C_{ox} (W/L)_2 I_D}$\n\n#### Realistic Case (Including channel length modulation $r_o$ and body effect $g_{mb2}$):\n* Small-signal resistance looking into the load (PMOS $M_2$):\n  $$R_L = \\frac{1}{g_{m2} + g_{mb2}} \\parallel r_{o2}$$\n* Total output impedance ($R_{\\text{out}}$):\n  $$R_{\\text{out}} = r_{o1} \\parallel R_L = r_{o1} \\parallel \\left(\\frac{1}{g_{m2} + g_{mb2}} \\parallel r_{o2}\\right) \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n\n* Precise Small-Signal Voltage Gain:\n  $$A_v = -g_{m1} R_{\\text{out}} \\approx -\\frac{g_{m1}}{g_{m2} + g_{mb2}}$$\n\n---\n\n### 4. Input and Output Impedances\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  $$R_{\\text{in}} = \\infty \\quad \\text{(at low/medium frequencies, due to the isolated MOS gate)}$$\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  $$R_{\\text{out}} \\approx \\frac{1}{g_{m2}} \\quad \\text{(relatively low standard output impedance)}$$\n\n---\n\n### 5. Summary of Circuit Properties\n\n| Parameter | Formula / Value | Characteristics |\n| :--- | :--- | :--- |\n| **Gain ($A_v$)** | $-\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$ | Moderate gain; set entirely by transistor geometry ratio |\n| **Linearity** | High | Very linear transfer curve |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m2}}$ | Low output impedance |\n| **Max Output Voltage** | $V_{DD} - |V_{TH2}|$ | High-side output swing is limited by PMOS threshold voltage |\n\n#### **Advantages:**\n1. **High Linearity:** The voltage gain depends on physical dimensions $(W/L)$, which are fixed during fabrication.\n2. **Process and Temperature Stability:** Since the gain is a ratio of physical parameters, variations in supply voltage or temperature largely cancel out.\n\n#### **Disadvantages:**\n1. **Low Gain:** Compared to amplifiers using current-source loads ($A_v \\propto g_{m1} r_o$), the gain here is limited to $-\\frac{g_{m1}}{g_{m2}}$ (typically $1$ to $10$).\n2. **Reduced Output Swing:** Output cannot reach $V_{DD}$ (limited to $V_{DD} - |V_{TH2}|$).",
        "format": "markdown",
        "sha256": "b48441505a27faaa20fa024809bcb94a70a42a0e93b7b1b94ab55ac30cbeb0ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the correct inverting gain, −gm1/gm2. Its additional small-signal model includes both devices’ output resistances; the other large-signal and body-effect details are not essential to the answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 3063,
        "total_tokens": 4164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1514,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 3063,
        "total_tokens": 4164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1514,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **1. Circuit Identification**\nThe circuit shown is a **Common-Source (CS) Amplifier with a Diode-Connected PMOS Load**.\n\n* **$M_1$ (NMOS Driver):** Receives the input signal $V_{\\text{in}}$ at its gate, with its source connected to ground.\n* **$M_2$ (PMOS Active Load):** Diode-connected (gate tied to its drain at the output node $V_{\\text{out}}$) with its source connected to $V_{DD}$.\n\n---\n\n### **2. Large-Signal / DC Analysis**\n\n#### **A. Operating Regions**\n\n1. **Cutoff Region ($V_{\\text{in}} < V_{TH1}$):**\n   * Transistor $M_1$ is **OFF** ($I_{D1} = 0$).\n   * $M_2$ conducts until $V_{SG2} = |V_{TH2}|$, at which point it turns off.\n   * **Output Voltage:** \n     $$V_{\\text{out}} = V_{DD} - |V_{TH2}|$$\n\n2. **Saturation Region ($M_1$ and $M_2$ both in Saturation):**\n   * Since $M_2$ is diode-connected ($V_{DG2} = 0 \\le |V_{TH2}|$), it is **always in saturation** when conducting.\n   * $M_1$ is in saturation for $V_{\\text{in}} > V_{TH1}$ and $V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH1}$.\n   * Equating the drain currents ($I_{D1} = I_{D2}$), neglecting channel-length modulation ($\\lambda = 0$):\n     $$\\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH1})^2 = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{out}} - |V_{TH2}|)^2$$\n\n   * Taking the square root on both sides:\n     $$\\sqrt{\\mu_n \\left(\\frac{W}{L}\\right)_1} (V_{\\text{in}} - V_{TH1}) = \\sqrt{\\mu_p \\left(\\frac{W}{L}\\right)_2} (V_{DD} - V_{\\text{out}} - |V_{TH2}|)$$\n\n   * Solving for $V_{\\text{out}}$ gives the **Voltage Transfer Characteristic (VTC)**:\n     $$V_{\\text{out}} = V_{DD} - |V_{TH2}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} \\cdot (V_{\\text{in}} - V_{TH1})$$\n\n   > **Key Insight:** The relationship between $V_{\\text{out}}$ and $V_{\\text{in}}$ in saturation is **linear**, resulting in very low signal distortion.\n\n3. **Triode Region ($M_1$ in Triode):**\n   * Occurs when $V_{\\text{out}} < V_{\\text{in}} - V_{TH1}$. $M_1$ enters the triode (linear) region, and gain drops significantly.\n\n---\n\n### **3. Small-Signal Analysis**\n\n#### **A. Small-Signal Parameters**\n* **Transconductance of $M_1$:** $g_{m1} = \\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 I_D}$\n* **Transconductance of $M_2$:** $g_{m2} = \\sqrt{2 \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 I_D}$\n* **Small-signal impedance looking into $M_2$'s drain:** $R_{L} = \\frac{1}{g_{m2}} \\parallel r_{o2} \\approx \\frac{1}{g_{m2}}$\n\n#### **B. Voltage Gain ($A_v$)**\n\n1. **Ideal Case ($\\lambda = 0$, infinite output resistance):**\n   $$A_v = -g_{m1} \\cdot \\left(\\frac{1}{g_{m2}}\\right) = -\\frac{g_{m1}}{g_{m2}}$$\n\n   Substituting $g_{m1}$ and $g_{m2}$:\n   $$A_v = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n2. **Including Channel-Length Modulation ($\\lambda \\neq 0$):**\n   $$A_v = -g_{m1} \\left( r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}} \\right) \\approx -\\frac{g_{m1}}{g_{m2} + g_{o1} + g_{o2}}$$\n\n---\n\n### **4. Summary of Circuit Characteristics**\n\n| Characteristic | Performance / Value |\n| :--- | :--- |\n| **Small-Signal Gain** | $A_v = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$ |\n| **Output Resistance** | $R_{\\text{out}} \\approx \\frac{1}{g_{m2}}$ (relatively low) |\n| **Maximum Output Voltage** | $V_{\\text{out, max}} = V_{DD} - |V_{TH2}|$ |\n| **Linearity** | High (gain depends on physical dimensions, independent of $I_D$ and $V_{\\text{in}}$) |\n| **Main Advantage** | Supply and temperature variations cancel out to first order |\n| **Main Disadvantage** | Lower gain compared to current-source loaded CS amplifiers; reduced output swing due to $V_{TH2}$ drop |",
        "format": "markdown",
        "sha256": "5cbc3b1a533523888f5629eff111f24f30e9dd58f9f446cd2ddf13a688afb61d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain both without channel-length modulation and with both devices’ output resistances included. Secondary large-signal remarks do not change the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 3575,
        "total_tokens": 4676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2234,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 3575,
        "total_tokens": 4676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2234,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the given Integrated Circuit (IC) stage.\n\n---\n\n### 1. Circuit Identification and Topology\n\n* **Circuit Type:** Common-Source Amplifier with a **Diode-Connected PMOS Load**.\n* **Transistor $M_1$:** **NMOS transistor** acting as the **input driver**.\n  * **Gate:** Connected to input signal $V_{\\text{in}}$\n  * **Source:** Connected to Ground ($0\\text{ V}$)\n  * **Drain:** Connected to output node $V_{\\text{out}}$\n* **Transistor $M_2$:** **PMOS transistor** acting as an **active load**.\n  * **Source:** Connected to supply rail $V_{DD}$\n  * **Gate & Drain:** Connected together at the output node $V_{\\text{out}}$ (Diode Connection)\n\n---\n\n### 2. Operating Regions of $M_2$\n\nSince the gate of PMOS transistor $M_2$ is tied to its drain:\n$$V_{G2} = V_{D2} = V_{\\text{out}}$$\n$$V_{SG2} = V_{SD2} = V_{DD} - V_{\\text{out}}$$\n\nSince $V_{SD2} = V_{SG2} > V_{SG2} - |V_{THP}|$, **$M_2$ is always operating in the saturation region** whenever it is ON (i.e., when $V_{SG2} > |V_{THP}|$).\n\n---\n\n### 3. Large-Signal Analysis & Voltage Transfer Characteristic (VTC)\n\nAs $V_{\\text{in}}$ varies, the circuit moves through three main operating regions:\n\n#### **Region 1: $V_{\\text{in}} < V_{THN}$ (NMOS Cutoff)**\n* $M_1$ is OFF ($I_{D1} = 0$).\n* No current flows through $M_2$, so $V_{SG2}$ settles at its threshold voltage $|V_{THP}|$.\n* **Output Voltage:** \n  $$V_{\\text{out}} = V_{DD} - |V_{THP}|$$\n\n#### **Region 2: $V_{THN} < V_{\\text{in}} < V_{\\text{in,sat}}$ (Both Transistors in Saturation)**\n* $M_1$ turns ON in saturation, and $M_2$ is also in saturation.\n* Equating the drain currents ($I_{D1} = I_{D2}$):\n  $$\\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{THN})^2 = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{out}} - |V_{THP}|)^2$$\n\n* Taking the square root on both sides and solving for $V_{\\text{out}}$:\n  $$V_{\\text{out}} = V_{DD} - |V_{THP}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} (V_{\\text{in}} - V_{THN})$$\n\n> **Key Observation:** In saturation, the output voltage is a **strictly linear function** of the input voltage $V_{\\text{in}}$.\n\n#### **Region 3: $V_{\\text{in}} > V_{\\text{out}} + V_{THN}$ (NMOS in Triode/Linear Region)**\n* As $V_{\\text{in}}$ rises further, $V_{\\text{out}}$ falls below $V_{\\text{in}} - V_{THN}$, causing $M_1$ to enter the triode region.\n* $V_{\\text{out}}$ pulled down towards Ground.\n\n---\n\n### 4. Small-Signal Analysis\n\n#### **Load Impedance ($R_{\\text{load}}$):**\nLooking up into the drain of diode-connected $M_2$:\n$$R_{\\text{load}} = \\frac{1}{g_{m2}} \\parallel r_{o2} \\approx \\frac{1}{g_{m2}}$$\n\n#### **Small-Signal Voltage Gain ($A_v$):**\nUsing the open-circuit gain formula $A_v = -g_{m1} \\cdot R_{\\text{out,total}}$:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m1} \\left( \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2} \\right) \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\nSubstituting the transconductance formulas $g_m = \\sqrt{2 \\mu C_{ox} (W/L) I_D}$:\n$$A_v = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n> **Key Advantage:** The voltage gain depends **only on aspect ratios $(W/L)$ and material properties $(\\mu_n, \\mu_p)$**. It is independent of bias current $I_D$ and input voltage $V_{\\text{in}}$, yielding exceptionally low harmonic distortion.\n\n---\n\n### 5. Input and Output Impedance\n\n* **Input Impedance ($R_{\\text{in}}$):** \n  $$R_{\\text{in}} = \\infty \\quad (\\text{at low frequencies, looking into the MOS gate})$$\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  $$R_{\\text{out}} = r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}} \\approx \\frac{1}{g_{m2}}$$\n\n---\n\n### 6. Summary of Key Characteristics\n\n| Parameter | Value / Formula |\n| :--- | :--- |\n| **Small-Signal Gain ($A_v$)** | $-\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$ |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m2}}$ |\n| **Max Output Voltage ($V_{\\text{out,max}}$)** | $V_{DD} - |V_{THP}|$ |\n| **Linearity** | Extremely high in saturation region |\n| **Main Drawback** | Low voltage gain compared to current-source loads, and reduced maximum output voltage swing due to $|V_{THP}|$ drop. |",
        "format": "markdown",
        "sha256": "0d1b8f12ea6530e04dd5aa39cc93a50f17cf388444c7b041773fc3067217a414"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including a consistent channel-length-modulation form. The full-credit rule applies; the extra large-signal and performance claims do not alter the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 3588,
        "total_tokens": 4689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2123,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 3588,
        "total_tokens": 4689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2123,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This figure shows a **Common-Source (CS) Amplifier with a Diode-Connected Load**, implemented using **PMOS transistors** ($M_1$ and $M_2$).\n\n---\n\n### **1. Circuit Components & Topology**\n\n* **Driver Transistor ($M_2$):** A **PMOS** transistor configured as the input driver.\n  * **Source:** Connected to $V_{DD}$.\n  * **Gate:** Connected to input signal $V_{\\text{in}}$.\n  * **Drain:** Connected to the output node $V_{\\text{out}}$.\n* **Load Transistor ($M_1$):** A **diode-connected PMOS** transistor serving as an active load.\n  * **Source:** Connected to $V_{\\text{out}}$.\n  * **Gate & Drain:** Shorted together and connected to Ground ($0\\text{ V}$).\n\n---\n\n### **2. DC / Large-Signal Analysis**\n\n#### **Operation Regions:**\n1. **$M_2$ (PMOS Driver):**\n   * Source voltage $V_{S2} = V_{DD}$.\n   * Source-to-Gate voltage $V_{SG2} = V_{DD} - V_{\\text{in}}$.\n   * For $M_2$ to operate in **saturation**:\n     $$V_{SG2} \\ge |V_{THP2}| \\implies V_{\\text{in}} \\le V_{DD} - |V_{THP2}|$$\n     $$V_{SD2} \\ge V_{SG2} - |V_{THP2}|$$\n\n   * Drain current of $M_2$ in saturation (ignoring channel-length modulation $\\lambda$):\n     $$I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{THP2}|)^2$$\n\n2. **$M_1$ (Diode-Connected PMOS Load):**\n   * Since $V_{G1} = V_{D1} = 0\\text{ V}$, we have $V_{DG1} = 0\\text{ V} \\le |V_{THP1}|$. \n   * This forces $M_1$ to **always operate in saturation** as long as $V_{SG1} \\ge |V_{THP1}|$ ($V_{\\text{out}} \\ge |V_{THP1}|$).\n   * Drain current of $M_1$ in saturation:\n     $$I_{D1} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{out}} - |V_{THP1}|)^2$$\n\n#### **DC Output Voltage Expression:**\nSetting $I_{D1} = I_{D2}$ and assuming equal threshold voltages ($|V_{THP1}| = |V_{THP2}| = |V_{THP}|$):\n\n$$V_{\\text{out}} = \\sqrt{\\frac{(W/L)_2}{(W/L)_1}} \\left(V_{DD} - V_{\\text{in}} - |V_{THP}|\\right) + |V_{THP}|$$\n\n---\n\n### **3. Small-Signal Analysis**\n\n#### **Key Small-Signal Parameters:**\n* **Transconductance of $M_2$:** $g_{m2} = \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{SG2} - |V_{THP2}|)$\n* **Transconductance of $M_1$:** $g_{m1} = \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{SG1} - |V_{THP1}|)$\n* **Small-signal impedance of $M_1$:** Looking into the source of the diode-connected load $M_1$:\n  $$R_{L} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n#### **Small-Signal Voltage Gain ($A_v$):**\nTaking channel-length modulation ($r_{o1}, r_{o2}$) and body effect ($g_{mb1}$) into account:\n\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m2} \\cdot \\left( \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\right)$$\n\nIf **channel-length modulation ($\\lambda \\approx 0$)** and **body effect ($g_{mb1} \\approx 0$)** are neglected:\n\n$$A_v \\approx -\\frac{g_{m2}}{g_{m1}} = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n---\n\n### **4. Key Performance Characteristics**\n\n| Parameter | Formula / Value | Description |\n| :--- | :--- | :--- |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ | Looking directly into the gate of $M_2$. |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m1}}$ | Determined primarily by the low impedance of the diode load. |\n| **Gain Linearity** | Highly Linear | Gain depends on physical device dimensions $\\sqrt{(W/L)_2 / (W/L)_1}$, making it independent of bias currents. |\n| **Output Voltage Swing** | $V_{\\text{out, min}} = \\|V_{THP1}\\|$ | $V_{\\text{out}}$ cannot fall below $|V_{THP1}|$, limiting headroom. |\n\n---\n\n### **5. Summary**\n* **Advantage:** High linearity without using physical resistors (saves significant silicon area in CMOS IC design).\n* **Disadvantage:** Moderate voltage gain (limited by realistic transistor aspect ratios) and restricted output voltage swing due to threshold voltage drops.",
        "format": "markdown",
        "sha256": "0660d92a7f433dc9c032bda7fb1e44cb481f0605e490ca9a03f4ca2746762993"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, M1 as the diode-connected PMOS load tied to ground, and gives the expected gain Av ≈ −gm2/gm1.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 5446,
        "total_tokens": 6528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 5446,
        "total_tokens": 6528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit:\n\n---\n\n### 1. Circuit Overview and Topology\n* **Circuit Type:** PMOS Common-Source (CS) Amplifier with a Diode-Connected PMOS Load.\n* **Transistors:**\n  * **$M_2$ (Input Driver):** PMOS transistor. Its gate receives the input signal $V_{\\text{in}}$, its source is tied to $V_{DD}$, and its drain is connected to the output node $V_{\\text{out}}$.\n  * **$M_1$ (Load Device):** PMOS transistor. Its gate and drain are shorted together to ground ($0\\text{ V}$), making it a **diode-connected load**. Its source is connected to $V_{\\text{out}}$.\n\n---\n\n### 2. Operating Regions and DC Behavior\n\n#### Transistor $M_1$ (Load):\nSince the gate and drain of $M_1$ are both connected to ground ($V_{G1} = V_{D1} = 0\\text{ V}$):\n* Source-to-Gate Voltage: $V_{SG1} = V_{\\text{out}} - 0 = V_{\\text{out}}$\n* Source-to-Drain Voltage: $V_{SD1} = V_{\\text{out}} - 0 = V_{\\text{out}}$\n\nBecause $V_{SD1} = V_{SG1} > V_{SG1} - |V_{THP1}|$, **$M_1$ is guaranteed to operate in the saturation region** whenever it is turned ON ($V_{\\text{out}} > |V_{THP1}|$).\n\n#### Transistor $M_2$ (Driver):\nFor $M_2$ to operate in saturation, it requires:\n$$V_{SD2} \\ge V_{SG2} - |V_{THP2}| \\implies V_{DD} - V_{\\text{out}} \\ge (V_{DD} - V_{\\text{in}}) - |V_{THP2}|$$\n$$V_{\\text{out}} \\le V_{\\text{in}} + |V_{THP2}|$$\n\n---\n\n### 3. Large-Signal Analysis (Transfer Characteristic)\n\nEquating the drain current of $M_2$ to $M_1$ in saturation (assuming $\\lambda = 0$):\n\n$$I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{THP2}|)^2$$\n\n$$I_{D1} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{out}} - |V_{THP1}|)^2$$\n\nSetting $I_{D1} = I_{D2}$:\n\n$$\\sqrt{\\left(\\frac{W}{L}\\right)_2} \\left(V_{DD} - V_{\\text{in}} - |V_{THP2}|\\right) = \\sqrt{\\left(\\frac{W}{L}\\right)_1} \\left(V_{\\text{out}} - |V_{THP1}|\\right)$$\n\nSolving for $V_{\\text{out}}$:\n\n$$V_{\\text{out}} = \\sqrt{\\frac{(W/L)_2}{(W/L)_1}} \\left(V_{DD} - V_{\\text{in}} - |V_{THP2}|\\right) + |V_{THP1}|$$\n\n---\n\n### 4. Small-Signal Voltage Gain ($A_v$)\n\n#### **Ideal Case** (Neglecting channel length modulation $\\lambda=0$ and body effect):\nDifferentiating $V_{\\text{out}}$ with respect to $V_{\\text{in}}$, or using small-signal parameters $A_v = -g_{m2} R_{out}$:\n\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -\\frac{g_{m2}}{g_{m1}}$$\n\nSince $g_m = \\sqrt{2 \\mu_p C_{ox} (W/L) I_D}$ and both transistors share the same DC current $I_D$:\n\n$$A_v = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n#### **Including Channel-Length Modulation ($\\lambda \\ne 0$) and Body Effect ($g_{mb1}$):**\n* Small-signal resistance looking into the source of $M_1$: $R_{out,1} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1}$\n* Small-signal resistance looking into the drain of $M_2$: $r_{o2}$\n\nThe overall gain becomes:\n\n$$A_v = -g_{m2} \\left( \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\right) \\approx -\\frac{g_{m2}}{g_{m1} + g_{mb1}} = -\\frac{g_{m2}}{g_{m1}(1 + \\eta_1)}$$\n\n*(where $\\eta_1 = g_{mb1} / g_{m1}$ is the body effect coefficient of $M_1$)*.\n\n---\n\n### 5. Summary of Key Performance Characteristics\n\n1. **High Linearity:** To a first-order approximation, the gain depends only on the physical aspect ratios $\\sqrt{(W/L)_2 / (W/L)_1}$ and is independent of the input bias voltage or supply voltage variations.\n2. **Moderate Gain:** The gain is determined by aspect ratios and is generally small to moderate (typically around 2–5 V/V) compared to amplifiers with active current-source loads.\n3. **Body Effect Penalty:** Since the source of $M_1$ is at $V_{\\text{out}}$ while its n-well (bulk) is typically connected to $V_{DD}$, $V_{SB1} \\neq 0$. This introduces body effect ($g_{mb1}$), which slightly degrades the overall voltage gain.",
        "format": "markdown",
        "sha256": "ad58add27e3e1ddbe657cd8618aaeaf3ee87781b46c6753a2ded8a3ca5dac94f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with its gate and drain grounded. It gives the required gm/gm gain, Av ≈ −gm2/gm1; the additional body-effect and large-signal discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 4981,
        "total_tokens": 6063,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3613,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 4981,
        "total_tokens": 6063,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3613,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis of the circuit's topology, operation, DC transfer characteristics, and small-signal performance.\n\n---\n\n### 1. Circuit Identification and Topology\n* **Circuit Type:** Common-Source (CS) Amplifier with a Diode-Connected PMOS Load.\n* **Transistors:**\n  * **$M_2$ (Input Driver):** A **PMOS** transistor configured as the main amplifier device.\n    * Source ($S_2$) is connected to $V_{DD}$.\n    * Gate ($G_2$) receives the input signal $V_{\\text{in}}$.\n    * Drain ($D_2$) is connected to the output node $V_{\\text{out}}$.\n  * **$M_1$ (Load Device):** A **PMOS** transistor acting as a diode-connected load.\n    * Gate ($G_1$) and Drain ($D_1$) are tied together to **Ground ($0\\text{ V}$)**.\n    * Source ($S_1$) is connected to the output node $V_{\\text{out}}$.\n\n---\n\n### 2. Operating Regions of the Transistors\n\n#### **Load Transistor ($M_1$)**\n* Since $V_{G1} = V_{D1} = 0\\text{ V}$, the source-to-gate and source-to-drain voltages are equal:\n  $$V_{SG1} = V_{\\text{out}} - 0 = V_{\\text{out}}$$\n  $$V_{SD1} = V_{\\text{out}} - 0 = V_{\\text{out}}$$\n* The condition for $M_1$ to be in saturation is $V_{SD1} \\ge V_{SG1} - |V_{THp1}|$, which simplifies to:\n  $$V_{\\text{out}} \\ge V_{\\text{out}} - |V_{THp1}|$$\n* Because $|V_{THp1}| > 0$, this condition is **always satisfied** whenever $M_1$ is conducting ($V_{\\text{out}} > |V_{THp1}|$). Hence, $M_1$ operates exclusively in **saturation**.\n\n#### **Input Transistor ($M_2$)**\n* **ON Condition:** $V_{SG2} > |V_{THp2}| \\implies V_{DD} - V_{\\text{in}} > |V_{THp2}| \\implies V_{\\text{in}} < V_{DD} - |V_{THp2}|$\n* **Saturation Region:** $V_{SD2} \\ge V_{SG2} - |V_{THp2}| \\implies V_{\\text{out}} \\le V_{\\text{in}} + |V_{THp2}|$\n\n---\n\n### 3. Large-Signal (DC) Analysis\n\nWhen both $M_1$ and $M_2$ are operating in saturation, their drain currents are equal ($I_{D1} = I_{D2}$):\n\n$$\\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{THp2}|)^2 = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{out}} - |V_{THp1}|)^2$$\n\nAssuming matched oxide thickness ($C_{ox}$) and mobility ($\\mu_p$), taking the square root yields:\n\n$$\\sqrt{\\left(\\frac{W}{L}\\right)_2} (V_{DD} - V_{\\text{in}} - |V_{THp2}|) = \\sqrt{\\left(\\frac{W}{L}\\right)_1} (V_{\\text{out}} - |V_{THp1}|)$$\n\nSolving for $V_{\\text{out}}$:\n\n$$V_{\\text{out}} = \\sqrt{\\frac{(W/L)_2}{(W/L)_1}} \\left( V_{DD} - V_{\\text{in}} - |V_{THp2}| \\right) + |V_{THp1}|$$\n\n#### **DC Transfer Curve Regions:**\n1. **$V_{\\text{in}} > V_{DD} - |V_{THp2}|$:** $M_2$ is OFF. No current flows, and $V_{\\text{out}}$ drops to $|V_{THp1}|$.\n2. **$V_{\\text{in}} < V_{DD} - |V_{THp2}|$ (Saturation):** Both $M_2$ and $M_1$ are in saturation. The relationship between $V_{\\text{out}}$ and $V_{\\text{in}}$ is **linear**.\n3. **Very Low $V_{\\text{in}}$ (Triode):** $M_2$ enters the triode region ($V_{\\text{out}} > V_{\\text{in}} + |V_{THp2}|$), causing the gain to drop as $V_{\\text{out}}$ approaches $V_{DD}$.\n\n---\n\n### 4. Small-Signal Analysis & Voltage Gain ($A_v$)\n\nTo find the small-signal gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n\n1. **Input Transistor $M_2$:** Converts input voltage to current $i_i = g_{m2} v_{\\text{in}}$.\n2. **Output Impedance ($R_{\\text{out}}$):** Looking into the output node:\n   * Resistance looking into $M_1$'s source: $R_{M1} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1}$\n   * Resistance looking into $M_2$'s drain: $R_{M2} = r_{o2}$\n\nCombining these gives the overall output resistance:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2}$$\n\n#### **Ideal Voltage Gain (Neglecting Channel Length Modulation & Body Effect):**\n$$A_v = -g_{m2} \\cdot \\left(\\frac{1}{g_{m1}}\\right) = -\\frac{g_{m2}}{g_{m1}} = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n#### **Voltage Gain with Body Effect ($\\eta = g_{mb1}/g_{m1}$):**\n$$A_v = -\\frac{g_{m2}}{g_{m1} + g_{mb1}} = -\\frac{1}{1 + \\eta} \\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n#### **Voltage Gain with Channel Length Modulation ($r_{o1}, r_{o2}$):**\n$$A_v = -g_{m2} \\left( \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\right)$$\n\n---\n\n### 5. Input and Output Impedances\n\n* **Input Impedance ($R_{\\text{in}}$):** Infinite ($R_{\\text{in}} = \\infty$) due to the isolated MOSFET gate terminal.\n* **Output Impedance ($R_{\\text{out}}$):** Relatively low compared to standard active-load CS stages:\n  $$R_{\\text{out}} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n---\n\n### 6. Summary of Key Characteristics\n\n| Parameter | Expression / Description |\n| :--- | :--- |\n| **Input Device ($M_2$)** | PMOS in Common-Source configuration |\n| **Load Device ($M_1$)** | Diode-connected PMOS ($V_{DG1}=0$) |\n| **Ideal Voltage Gain ($A_v$)** | $-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$ |\n| **Linearity** | Excellent linearity in saturation (independent of bias current $I_D$) |\n| **Output Swing** | Limited at lower end to $V_{\\text{out,min}} = |V_{THp1}|$ |\n| **Main Advantage** | Highly predictable gain determined solely by aspect ratios $(W/L)$ |",
        "format": "markdown",
        "sha256": "26298266726295d1e542f6612c51914c7d3af6ff85c6d1de0c576da3f8333962"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain grounded. It gives the required gm/gm gain, Av ≈ −gm2/gm1; the additional detail does not displace the correct core interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 7133,
        "total_tokens": 8215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 7133,
        "total_tokens": 8215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance **$R_{\\text{out}}$** looking into the drain of transistor $M_1$, we analyze the small-signal equivalent of the PMOS cascode structure shown in the circuit.\n\n---\n\n### **1. Small-Signal Parameters**\n- **$M_2$**: \n  - Source connected to AC ground ($V_{DD}$).\n  - Gate connected to AC ground ($V_{b2}$).\n  - Output resistance looking into the drain (node $X$) is:\n    $$R_X = r_{o2}$$\n\n- **$M_1$**:\n  - Acts as a cascode transistor with its source connected to node $X$ and gate to AC ground ($V_{b1}$).\n  - Transconductance: $g_{m1}$\n  - Body-effect transconductance: $g_{mb1}$ (if body is tied to $V_{DD}$)\n  - Channel length modulation resistance: $r_{o1}$\n\n---\n\n### **2. Exact Formula for Output Resistance**\n\nUsing the standard cascode resistance formula where $R_S = r_{o2}$ is the resistance connected at the source of $M_1$:\n\n$$R_{\\text{out}} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1}) \\, r_{o1} \\, r_{o2}$$\n\nAlternatively, this can be written as:\n$$R_{\\text{out}} = \\left[ 1 + (g_{m1} + g_{mb1}) r_{o1} \\right] r_{o2} + r_{o1}$$\n\n---\n\n### **3. Common Approximations**\n\n1. **Neglecting Body Effect ($g_{mb1} = 0$):**\n   $$R_{\\text{out}} = r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2} = (1 + g_{m1} r_{o1}) r_{o2} + r_{o1}$$\n\n2. **High Intrinsic Gain Assumption ($g_{m1} r_{o1} \\gg 1$):**\n   $$R_{\\text{out}} \\approx (g_{m1} + g_{mb1}) r_{o1} r_{o2} \\quad \\text{or} \\quad R_{\\text{out}} \\approx g_{m1} r_{o1} r_{o2}$$",
        "format": "markdown",
        "sha256": "b6d14e9482567c2e5a41d338491d88fa1a61ed01bbdda412e918c49369518ea5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the cascode device and gives the full output-resistance expression, including the optional body-effect term and appropriate approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 3114,
        "total_tokens": 4223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2570,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 3114,
        "total_tokens": 4223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2570,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{\\text{out}}$ looking into the drain of transistor $M_1$, we perform a small-signal analysis on this **PMOS cascode structure**.\n\n---\n\n### **1. Impedance at Node $X$**\n* Transistor $M_2$ has its source connected to $V_{DD}$ (AC ground) and its gate connected to a fixed bias voltage $V_{b2}$ (AC ground).\n* Therefore, the small-signal gate-source voltage of $M_2$ is zero ($v_{sg2} = 0$).\n* Looking into the drain of $M_2$ at node $X$, the small-signal resistance is simply the output resistance of $M_2$:\n  $$R_X = r_{o2}$$\n\n---\n\n### **2. Output Resistance $R_{\\text{out}}$ Calculation**\nTransistor $M_1$ acts as a cascode transistor degenerated by the source resistance $R_S = R_X = r_{o2}$.\n\nUsing the standard formula for the output impedance of a transistor with source degeneration:\n$$R_{\\text{out}} = r_{o1} + R_S + (g_{m1} + g_{mb1}) r_{o1} R_S$$\n\nSubstituting $R_S = r_{o2}$ into the equation gives:\n\n$$R_{\\text{out}} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1}) r_{o1} r_{o2}$$\n\n---\n\n### **3. Common Approximations**\n\n1. **Neglecting Body Effect ($g_{mb1} \\approx 0$):**\n   $$R_{\\text{out}} \\approx r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2}$$\n\n2. **High-Gain Approximation ($g_{m1} r_{o1} \\gg 1$):**\n   $$R_{\\text{out}} \\approx (g_{m1} + g_{mb1}) r_{o1} r_{o2} \\approx g_{m1} r_{o1} r_{o2}$$\n\n---\n\n### **Final Answer:**\n$$R_{\\text{out}} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1}) r_{o1} r_{o2} \\approx g_{m1} r_{o1} r_{o2}$$",
        "format": "markdown",
        "sha256": "f611c8009e8e87da680ba0907e2994c91430815e499c7cbfaf4e1ede6678e5a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the cascode device and gives the full output-resistance expression and appropriate leading approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 3464,
        "total_tokens": 4573,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2910,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 3464,
        "total_tokens": 4573,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2910,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance **$R_{\\text{out}}$** looking into the drain of transistor $M_1$, we perform a small-signal analysis of the PMOS cascode structure.\n\n---\n\n### **1. Resistance at Node $X$ ($R_X$)**\n* Transistor $M_2$ has its source connected to $V_{DD}$ (AC ground) and its gate to a fixed bias voltage $V_{b2}$ (AC ground).\n* Since $v_{gs2} = 0$ and $v_{bs2} = 0$, the internal dependent current source of $M_2$ is off ($g_{m2}v_{gs2} = 0$).\n* Therefore, the resistance looking into the drain of $M_2$ at node $X$ is simply its small-signal output resistance:\n  $$R_X = r_{o2}$$\n\n---\n\n### **2. Derivation of $R_{\\text{out}}$**\nApply a small-signal test voltage $v_t$ at the output terminal (drain of $M_1$) which draws a test current $i_t$:\n\n1. The voltage generated at node $X$ by the current $i_t$ flowing through $r_{o2}$ is:\n   $$v_x = i_t \\cdot r_{o2}$$\n\n2. The gate of $M_1$ is at AC ground ($v_{g1} = 0$). Thus, the gate-to-source voltage is:\n   $$v_{gs1} = v_{g1} - v_{x} = -i_t r_{o2}$$\n\n3. Assuming the body (bulk) of $M_1$ is connected to $V_{DD}$ (AC ground), the bulk-to-source voltage is:\n   $$v_{bs1} = 0 - v_{x} = -i_t r_{o2}$$\n\n4. Writing the KCL equation for the current $i_t$ through $M_1$:\n   $$i_t = -i_{ds1} = - \\left( g_{m1} v_{gs1} + g_{mb1} v_{bs1} + \\frac{v_{ds1}}{r_{o1}} \\right)$$\n\n   Substitute $v_{gs1}$, $v_{bs1}$, and $v_{ds1} = v_x - v_t$:\n   $$i_t = (g_{m1} + g_{mb1}) v_x - \\frac{v_x - v_t}{r_{o1}}$$\n   $$i_t = (g_{m1} + g_{mb1}) i_t r_{o2} - \\frac{i_t r_{o2} - v_t}{r_{o1}}$$\n\n5. Rearranging terms to solve for $R_{\\text{out}} = \\frac{v_t}{i_t}$:\n   $$\\frac{v_t}{r_{o1}} = i_t \\left( 1 - (g_{m1} + g_{mb1}) r_{o2} + \\frac{r_{o2}}{r_{o1}} \\right)$$\n   $$v_t = i_t \\left[ r_{o1} + r_{o2} + (g_{m1} + g_{mb1}) r_{o1} r_{o2} \\right]$$\n\n---\n\n### **Final Expression for $R_{\\text{out}}$**\n\n* **Exact formula (including body effect):**\n  $$R_{\\text{out}} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1}) r_{o1} r_{o2}$$\n\n* **Formula neglecting body effect ($g_{mb1} = 0$):**\n  $$R_{\\text{out}} = r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2}$$\n\n* **Common approximation (since $(g_{m1} + g_{mb1}) r_{o1} r_{o2} \\gg r_{o1} + r_{o2}$):**\n  $$R_{\\text{out}} \\approx (g_{m1} + g_{mb1}) r_{o1} r_{o2} \\quad \\text{or} \\quad R_{\\text{out}} \\approx g_{m1} r_{o1} r_{o2}$$",
        "format": "markdown",
        "sha256": "87b30c57ad2990253cca6e7fde25e278bb76abadf269816112dd7713ae65fc20"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the cascode device and gives the full Rout expression, including the optional body-effect term, and the appropriate approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 3754,
        "total_tokens": 4863,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 3754,
        "total_tokens": 4863,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the PMOS transistor **$M_2$** operates in the **saturation region**, two main conditions must be satisfied:\n\n---\n\n### 1. Condition for $M_2$ to be turned ON\nFor $M_2$ to conduct current, its source-to-gate voltage ($V_{SG2}$) must be greater than or equal to the magnitude of its threshold voltage ($|V_{TH2}|$):\n\n$$V_{SG2} \\ge |V_{TH2}|$$\n\nSince the source of $M_2$ is connected to $V_{DD}$ and its gate is connected to $V_{b2}$:\n$$V_{DD} - V_{b2} \\ge |V_{TH2}| \\implies \\mathbf{V_{b2} \\le V_{DD} - |V_{TH2}|}$$\n\n---\n\n### 2. Condition for $M_2$ to be in SATURATION\nFor a PMOS transistor to remain in saturation, the source-to-drain voltage ($V_{SD2}$) must satisfy:\n\n$$V_{SD2} \\ge V_{SG2} - |V_{TH2}|$$\n\nHere, the drain of $M_2$ is at node $X$ ($V_X$), so $V_{SD2} = V_{DD} - V_X$:\n\n$$V_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TH2}|$$\n\nSimplifying this inequality gives the maximum allowable voltage at node $X$:\n\n$$\\mathbf{V_X \\le V_{b2} + |V_{TH2}|}$$\n\n---\n\n### 3. Expressing in terms of Bias Voltages ($V_{b1}$ and $V_{b2}$)\nAssuming transistor $M_1$ is also operating in saturation, the voltage at node $X$ (which is the source of $M_1$) is determined by $M_1$'s gate voltage $V_{b1}$:\n\n$$V_X = V_{b1} + V_{SG1}$$\n\nSubstituting $V_X$ into the saturation condition for $M_2$:\n\n$$V_{b1} + V_{SG1} \\le V_{b2} + |V_{TH2}|$$\n\nRearranging for $V_{b2}$:\n\n$$\\mathbf{V_{b2} \\ge V_{b1} + V_{SG1} - |V_{TH2}|}$$\n\nIf we express $V_{SG1} = |V_{TH1}| + V_{OV1}$ (where $V_{OV1}$ is the overdrive voltage of $M_1$), and assuming $|V_{TH1}| \\approx |V_{TH2}|$, this simplifies to:\n\n$$\\mathbf{V_{b2} \\ge V_{b1} + V_{OV1}}$$\n\n---\n\n### Summary Range for $V_{b2}$\nTo keep $M_2$ safely in saturation, the bias voltage $V_{b2}$ must be set within the range:\n\n$$V_{b1} + V_{SG1} - |V_{TH2}| \\le V_{b2} \\le V_{DD} - |V_{TH2}|$$",
        "format": "markdown",
        "sha256": "f1245d8349cbddc4bd30d922d41fe97d087675b809940e376ef9d2ba5d809eb4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives M2’s PMOS saturation condition and relates VX to Vb1 through M1, deriving the equivalent condition Vb2 − Vb1 ≥ M1’s overdrive (assuming equal thresholds).",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3491,
        "total_tokens": 4608,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2790,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3491,
        "total_tokens": 4608,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2790,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the PMOS transistor $M_2$ remains in the **saturation region**, its source-drain voltage ($V_{SD2}$) must be greater than or equal to its overdrive voltage ($V_{OD2} = V_{SG2} - |V_{TH2}|$).\n\n---\n\n### **1. Saturation Condition for $M_2$**\n\nFor a PMOS transistor, the saturation region requirement is:\n$$V_{SD2} \\ge V_{SG2} - |V_{TH2}|$$\n\nFrom the circuit diagram:\n- **Source voltage of $M_2$:** $V_{S2} = V_{DD}$\n- **Gate voltage of $M_2$:** $V_{G2} = V_{b2}$\n- **Drain voltage of $M_2$:** $V_{D2} = V_X$\n\nSubstituting these voltages into the inequality:\n$$V_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TH2}|$$\n\nSimplifying this yields the condition on node voltage $V_X$:\n$$V_X \\le V_{b2} + |V_{TH2}|$$\n\n---\n\n### **2. Relation to Bias Voltages ($V_{b1}$ and $V_{b2}$)**\n\n Node $X$ is also the **source** of transistor $M_1$. Assuming $M_1$ is operating in saturation, its source voltage $V_X$ is fixed by its gate bias $V_{b1}$ and gate-source voltage $V_{SG1}$:\n$$V_X = V_{b1} + V_{SG1} = V_{b1} + |V_{TH1}| + V_{OD1}$$\n\nSubstituting $V_X$ back into the saturation condition for $M_2$:\n$$V_{b1} + |V_{TH1}| + V_{OD1} \\le V_{b2} + |V_{TH2}|$$\n\nAssuming matched threshold voltages ($|V_{TH1}| = |V_{TH2}|$):\n\n$$V_{b2} \\ge V_{b1} + V_{OD1}$$\n$$\\text{or} \\quad V_{b2} - V_{b1} \\ge V_{OD1}$$\n\n---\n\n### **Summary of Conditions**\n\nTo ensure $M_2$ is in saturation:\n1. **Node Voltage Condition:**  \n   $$V_X \\le V_{b2} + |V_{TH2}|$$\n2. **Bias Voltage Condition:**  \n   $$V_{b2} \\ge V_{b1} + V_{OD1}$$\n\n*(where $V_{OD1} = V_{SG1} - |V_{TH1}|$ is the overdrive voltage of $M_1$).*",
        "format": "markdown",
        "sha256": "a82e7ddeb8e501ace8ec6241df45261c42adde40718956f68927f144ddcebb9e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, derives M2’s saturation condition, and relates VX to Vb1 to obtain the equivalent bias condition Vb2 − Vb1 ≥ M1’s overdrive for matched thresholds.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3106,
        "total_tokens": 4223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2489,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3106,
        "total_tokens": 4223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2489,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that **$M_2$ is in saturation** in this PMOS cascode structure, we must analyze its terminal voltages and apply the saturation condition for PMOS transistors.\n\n---\n\n### **1. Identify the Circuit Configuration**\n* Both $M_1$ and $M_2$ are **PMOS transistors**.\n* For **$M_2$**:\n  * Source ($S_2$): $V_{S2} = V_{DD}$\n  * Gate ($G_2$): $V_{G2} = V_{b2}$\n  * Drain ($D_2$): $V_{D2} = V_X$\n\n---\n\n### **2. PMOS Saturation Condition**\nA PMOS transistor operates in the saturation region when:\n$$V_{SD2} \\ge V_{SG2} - |V_{TH2}|$$\n\nSubstitute the terminal voltages:\n$$(V_{DD} - V_X) \\ge (V_{DD} - V_{b2}) - |V_{TH2}|$$\n\nSimplifying the inequality gives the condition for the node voltage $V_X$:\n$$\\mathbf{V_X \\le V_{b2} + |V_{TH2}|}$$\n\n---\n\n### **3. Expressing in Terms of Bias Voltage $V_{b1}$**\nSince node $X$ is connected to the source of $M_1$:\n$$V_X = V_{b1} + V_{SG1} = V_{b1} + |V_{TH1}| + |V_{OD1}|$$\n\n*(where $|V_{OD1}| = V_{SG1} - |V_{TH1}|$ is the overdrive voltage of $M_1$)*.\n\nSubstituting $V_X$ back into the saturation condition:\n$$V_{b1} + |V_{TH1}| + |V_{OD1}| \\le V_{b2} + |V_{TH2}|$$\n\nAssuming matching threshold voltages ($|V_{TH1}| = |V_{TH2}| = |V_{TH}|$):\n$$\\mathbf{V_{b2} \\ge V_{b1} + |V_{OD1}|} \\quad \\text{or} \\quad \\mathbf{V_{b1} \\le V_{b2} - |V_{OD1}|}$$\n\n---\n\n### **Summary of Conditions**\n\n1. **To keep $M_2$ in Saturation:** \n   $$V_X \\le V_{b2} + |V_{TH2}| \\quad \\text{or} \\quad V_{b2} \\ge V_{b1} + |V_{OD1}|$$\n\n2. **To keep $M_2$ Turned ON:**\n   $$V_{b2} \\le V_{DD} - |V_{TH2}|$$",
        "format": "markdown",
        "sha256": "872dd282c9d201296bd0738496258086adaf319526b86eed80c1a1ca58ecc087"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, relates VX to Vb1 through M1’s VSG, and derives the equivalent Vb2 − Vb1 ≥ M1 overdrive condition for matched thresholds.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3819,
        "total_tokens": 4936,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3819,
        "total_tokens": 4936,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### **1. Circuit Identification and Overview**\n* **Topology:** **NMOS Cascode Amplifier** with an ideal current-source load ($I_1$).\n* **Components:**\n  * **$M_1$ (Input Transistor):** Configured as a **Common-Source (CS)** stage driven by the input voltage $v_{\\text{in}}$.\n  * **$M_2$ (Cascode Transistor):** Configured as a **Common-Gate (CG)** stage, biased at its gate by a constant DC voltage $V_{b1}$.\n  * **$I_1$ (Load Current Source):** Provides the DC bias current and acts as a high-impedance AC load.\n\n---\n\n### **2. DC (Biasing) & Voltage Headroom Analysis**\n\nFor both transistors $M_1$ and $M_2$ to operate in the **saturation region** (required for proper amplifier operation):\n\n1. **Conditions for $M_1$ Saturation:**\n   $$V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_X \\ge v_{\\text{in}} - V_{TH1} = V_{OD1}$$\n   *(where $V_{OD1}$ is the overdrive voltage of $M_1$)*\n\n2. **Conditions for $M_2$ Saturation:**\n   $$V_{GS2} = V_{b1} - V_X > V_{TH2}$$\n   $$V_{DS2} \\ge V_{GS2} - V_{TH2} = V_{OD2}$$\n\n3. **Node Voltage $V_X$:**\n   $$V_X = V_{b1} - V_{GS2}$$\n   To keep $M_1$ in saturation:\n   $$V_{b1} - V_{GS2} \\ge V_{OD1} \\implies V_{b1} \\ge V_{OD1} + V_{GS2}$$\n\n4. **Minimum Output Voltage ($v_{\\text{out,min}}$):**\n   $$v_{\\text{out,min}} = V_X + V_{OD2} = (V_{b1} - V_{GS2}) + (V_{GS2} - V_{TH2}) = V_{b1} - V_{TH2}$$\n   *Alternatively, in terms of overdrive voltages:*\n   $$v_{\\text{out,min}} = V_{OD1} + V_{OD2}$$\n\n---\n\n### **3. Small-Signal Analysis**\n\n#### **A. Output Impedance ($R_{\\text{out}}$)**\nLooking down into the drain of $M_2$, the output resistance is boosted by the cascode configuration:\n$$R_{\\text{out,down}} = r_{o1} + r_{o2} + (g_{m2} + g_{mb2}) r_{o1} r_{o2} \\approx (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n*(where $g_{mb2}$ accounts for the body effect of $M_2$ if its bulk is connected to ground).*\n\nAssuming the ideal current source load $I_1$ has an infinite output impedance ($R_L \\to \\infty$), the total output resistance is:\n$$R_{\\text{out}} \\approx (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\n---\n\n#### **B. Voltage Gain ($A_v$)**\nThe small-signal voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$ is given by:\n$$A_v = -g_{m1} R_{\\text{out}} \\approx -g_{m1} (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\nCompared to a simple common-source amplifier (whose gain is $-g_{m1} r_{o1}$), the cascode topology increases the gain by approximately a factor of **$(g_{m2} + g_{mb2}) r_{o2}$**.\n\n---\n\n#### **C. Voltage Gain at Node $X$ ($A_{v,X}$)**\nThe small-signal gain from the input to intermediate node $X$ is:\n$$A_{v,X} = \\frac{v_X}{v_{\\text{in}}} \\approx -\\frac{g_{m1}}{g_{m2} + g_{mb2}}$$\n\nIf $M_1$ and $M_2$ have similar transconductances ($g_{m1} \\approx g_{m2}$), then:\n$$A_{v,X} \\approx -1$$\n\n---\n\n### **4. Key Advantages & Trade-offs**\n\n1. **Mitigation of the Miller Effect (High Bandwidth):**\n   * Because the gain at node $X$ is small ($A_{v,X} \\approx -1$), the gate-drain capacitance $C_{gd1}$ of $M_1$ experiences minimal Miller multiplication ($C_{\\text{in,Miller}} \\approx 2 C_{gd1}$).\n   * This provides a much higher bandwidth compared to a standard common-source stage.\n\n2. **High Output Resistance & High Voltage Gain:**\n   * Boosting the output impedance allows the stage to achieve intrinsic voltage gains proportional to $(g_m r_o)^2$.\n\n3. **High Input Impedance:**\n   * The input drives the insulated gate of $M_1$, offering near-infinite input DC resistance.\n\n4. **Trade-off (Voltage Headroom Penalty):**\n   * Stacking two transistors reduces the maximum allowable output voltage swing by $V_{OD2}$ compared to a single-transistor CS amplifier.",
        "format": "markdown",
        "sha256": "9f19e9393ab80d7a3426cb4838475613963f760b8fead174964abfc0c2baae06"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load cascode gain. Its separate node-X and Miller-effect claims are inaccurate for an ideal current-source load, but the golden solution’s full-credit rule is met.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 2766,
        "total_tokens": 3848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1491,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 2766,
        "total_tokens": 3848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1491,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the given **Cascode Amplifier** circuit.\n\n---\n\n### 1. Circuit Overview and Topology\n* **Circuit Type:** NMOS Cascode Amplifier with an active load (current source $I_1$).\n* **Transistor Roles:**\n  * **$M_1$ (Input Transistor):** Operates in a **Common-Source (CS)** configuration. It receives the input voltage $v_{\\text{in}}$ at its gate and converts it into a small-signal drain current.\n  * **$M_2$ (Cascode Transistor):** Operates in a **Common-Gate (CG)** configuration. Its gate is held at a fixed DC bias voltage $V_{b1}$. It acts as a current buffer that routes the signal current to the output while boosting the output impedance.\n  * **$I_1$ (Active Load):** An ideal (or high-impedance) current source connected to $V_{DD}$, serving as an active load to maximize voltage gain.\n\n---\n\n### 2. Small-Signal Parameters\n\n#### **A. Output Impedance ($R_{\\text{out}}$)**\nLooking into the output node $v_{\\text{out}}$ down towards $M_2$:\n\n$$R_{\\text{out,down}} = r_{o2} + r_{o1} + (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\nFor typical MOS parameters where $(g_{m2} + g_{mb2}) r_{o1} r_{o2} \\gg r_{o1} + r_{o2}$:\n\n$$R_{\\text{out,down}} \\approx (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\nIf the current source $I_1$ has a finite output resistance $R_I$, the total output impedance is:\n\n$$R_{\\text{out}} = R_{\\text{out,down}} \\parallel R_I$$\n\n*(Assuming an ideal current source where $R_I \\to \\infty$, $R_{\\text{out}} \\approx R_{\\text{out,down}}$).*\n\n---\n\n#### **B. Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)**\nThe overall transconductance of the cascode stage is approximately $G_m \\approx g_{m1}$. \n\nThus, the small-signal voltage gain is:\n\n$$A_v = -G_m \\cdot R_{\\text{out}} \\approx -g_{m1} \\left[ (g_{m2} + g_{mb2}) r_{o1} r_{o2} \\parallel R_I \\right]$$\n\nIf $I_1$ is ideal ($R_I = \\infty$):\n\n$$A_v \\approx -g_{m1} (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\n> **Key Takeaway:** The cascode configuration increases the voltage gain by a factor of $\\sim g_{m2} r_{o2}$ compared to a single common-source stage.\n\n---\n\n#### **C. Node $X$ Impedance**\nLooking into intermediate node $X$ (the drain of $M_1$ / source of $M_2$):\n\n$$R_X \\approx \\frac{1}{g_{m2} + g_{mb2}} \\parallel r_{o1} \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n\nSince $R_X$ is relatively low, the voltage swing at node $X$ is very small.\n\n---\n\n### 3. Key Advantages\n\n1. **High Voltage Gain:** Stacking $M_2$ on top of $M_1$ increases the effective output resistance quadratically ($R_{\\text{out}} \\propto r_o^2$), resulting in significantly higher gain.\n2. **Mitigation of the Miller Effect:** Because the voltage gain from input to node $X$ is small ($A_{v1} \\approx -g_{m1} / g_{m2} \\approx -1$), the input gate-drain capacitance ($C_{gd1}$) does not suffer from high Miller multiplication. This drastically improves high-frequency performance and bandwidth.\n3. **High Reverse Isolation:** Variations at $v_{\\text{out}}$ have minimal effect back on the input $v_{\\text{in}}$.\n\n---\n\n### 4. DC Biasing & Headroom Constraints\n\nFor both transistors to remain in the **Saturation Region**:\n\n1. **$M_1$ Saturation Condition:**\n   $$V_X \\ge V_{\\text{in}} - V_{TH1}$$\n\n2. **$M_2$ Saturation Condition:**\n   $$V_{\\text{out}} \\ge V_X + (V_{b1} - V_X - V_{TH2}) = V_{b1} - V_{TH2}$$\n\n3. **Minimum Output Voltage Swing:**\n   $$v_{\\text{out,min}} = V_{DS1,\\text{sat}} + V_{DS2,\\text{sat}} = (V_{\\text{in}} - V_{TH1}) + (V_{b1} - V_X - V_{TH2})$$\n\n> **Trade-off:** Stacking multiple transistors limits the dynamic output voltage swing (headroom consumption), which can be a limitation in low-voltage integrated circuit designs.",
        "format": "markdown",
        "sha256": "4b9af77be5c4a6e44fcb0a33b0565fbd79290aca8599e5d0a54667991167b509"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source input NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression required by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 2492,
        "total_tokens": 3574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 2492,
        "total_tokens": 3574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This figure shows a **Cascode Amplifier** using NMOS transistors ($M_1$ and $M_2$) with an active load current source ($I_1$).\n\nHere is a detailed breakdown of the circuit analysis:\n\n---\n\n### 1. Circuit Configuration & Role of Components\n\n* **$M_1$ (Input Transistor / Common-Source Stage):** Converts the input small-signal voltage $v_{\\text{in}}$ into a small-signal drain current.\n* **$M_2$ (Cascode Transistor / Common-Gate Stage):** Connected with a constant DC bias voltage $V_{b1}$ at its gate. It acts as a current buffer that shields the input transistor $M_1$ from voltage variations at the output node $v_{\\text{out}}$.\n* **$I_1$ (Active Load):** An ideal (or high-impedance) current source connected to $V_{DD}$ providing the bias current $I_{D1} = I_{D2} = I_1$.\n\n---\n\n### 2. DC Bias & Headroom Requirements\n\nFor the amplifier to operate in the linear (saturation) region:\n\n1. **For $M_1$ to remain in saturation:**\n   $$V_X \\ge V_{GS1} - V_{TH1} = V_{OV1}$$\n   where $V_X = V_{b1} - V_{GS2}$. Thus, the bias voltage $V_{b1}$ must satisfy:\n   $$V_{b1} \\ge V_{OV1} + V_{GS2} = V_{OV1} + V_{OV2} + V_{TH2}$$\n\n2. **For $M_2$ to remain in saturation:**\n   $$V_{\\text{out}} \\ge V_X + V_{GS2} - V_{TH2} = V_X + V_{OV2} \\ge V_{OV1} + V_{OV2}$$\n\n* **Trade-off:** The minimum allowable output voltage swing is higher by at least one overdrive voltage ($V_{OV2}$) compared to a simple common-source amplifier, slightly reducing output voltage headroom.\n\n---\n\n### 3. Small-Signal Analysis\n\nLet:\n* $g_{m1}, g_{m2}$ be the transconductances of $M_1$ and $M_2$.\n* $g_{mb2}$ be the body-effect transconductance of $M_2$ (if body effect is considered).\n* $r_{o1}, r_{o2}$ be the output resistances of $M_1$ and $M_2$.\n\n#### **A. Output Impedance ($R_{\\text{out}}$)**\nLooking into the drain of $M_2$, the output resistance is boosted by the common-gate stage $M_2$:\n$$R_{\\text{out,down}} = r_{o1} + r_{o2} + (g_{m2} + g_{mb2}) r_{o1} r_{o2} \\approx (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\nIf the current source $I_1$ has a finite internal output resistance $R_{I1}$ (e.g., implemented via a PMOS cascode current mirror), the total output resistance is:\n$$R_{\\text{out}} = R_{\\text{out,down}} \\parallel R_{I1}$$\n\n#### **B. Voltage Gain ($A_v$)**\nAssuming an ideal current source load ($R_{I1} \\to \\infty$):\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m1} R_{\\text{out,down}} \\approx -g_{m1} (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\n* **Result:** The gain is increased by a factor of approximately $g_{m2} r_{o2}$ compared to a standard common-source stage (which has $A_v \\approx -g_{m1} r_{o1}$).\n\n#### **C. Node $X$ Impedance & Gain**\n* The impedance seen looking into the source of $M_2$ (at node $X$) is very low:\n  $$R_X \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n* Consequently, the voltage gain from $v_{\\text{in}}$ to node $X$ is small:\n  $$A_{v,X} = \\frac{v_X}{v_{\\text{in}}} \\approx -g_{m1} R_X \\approx -\\frac{g_{m1}}{g_{m2} + g_{mb2}} \\approx -1$$\n\n---\n\n### 4. Frequency Response & Miller Effect\n\n* **Suppression of Miller Effect:** \n  In a standard common-source stage, the gate-drain overlap capacitance $C_{gd1}$ is multiplied by the high stage gain $(1 + |A_v|)$ due to the Miller effect, creating a dominant pole at a low frequency.\n  In this cascode configuration, because the gain at node $X$ is low ($\\approx -1$), $C_{gd1}$ is only multiplied by $\\approx 2$. This significantly increases the bandwidth at the input node.\n\n---\n\n### Summary Table\n\n| Parameter | Cascode Amplifier | Standard Common-Source |\n| :--- | :--- | :--- |\n| **Output Resistance ($R_{\\text{out}}$)** | Very High ($\\approx g_{m2} r_{o2} r_{o1}$) | Low ($r_{o1}$) |\n| **Voltage Gain ($A_v$)** | Very High ($\\approx -g_{m1} g_{m2} r_{o1} r_{o2}$) | Moderate ($\\approx -g_{m1} r_{o1}$) |\n| **Bandwidth / Speed** | Higher (Miller effect suppressed) | Lower (High Miller capacitance at input) |\n| **Voltage Headroom** | Reduced (Requires $V_{\\text{out,min}} = V_{OV1} + V_{OV2}$) | Larger ($V_{\\text{out,min}} = V_{OV1}$) |",
        "format": "markdown",
        "sha256": "23ee5671023fce9dbeaa250eff8ae93d33902f4f248bf848db2db43c4c631260"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. The node-X low-gain and Miller discussion is inaccurate for an ideal current-source load, but the golden solution's full-credit rule awards full credit for the correct topology and gain.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 2580,
        "total_tokens": 3662,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1215,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 2580,
        "total_tokens": 3662,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1215,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the circuit shown in the figure is **not** a proper cascode structure.\n\n---\n\n### **Why it is not a cascode structure:**\n\n1. **Definition of a Cascode Stage:**\n   A standard NMOS cascode amplifier consists of a **Common-Source (CS)** stage driving a **Common-Gate (CG)** stage. \n   * The **drain** of the lower input transistor ($M_1$) must connect to the **source** of the upper cascode transistor ($M_2$).\n   * The **source** of $M_1$ must connect to Ground.\n\n2. **Analysis of the Schematic:**\n   * **Transistor $M_2$:** The arrow on the bottom terminal indicates that its **source** is connected to the intermediate node.\n   * **Transistor $M_1$:** The arrow on the top terminal indicates that its **source** (not its drain) is connected to the intermediate node, while its **drain** is connected to Ground.\n\n---\n\n### **Conclusion:**\nBecause the arrow of $M_1$ is at its top terminal, the two NMOS transistors are connected **source-to-source** at the intermediate node. For a proper cascode, $M_1$'s symbol should be flipped so its source (arrow) connects to Ground and its drain connects to the source of $M_2$.",
        "format": "markdown",
        "sha256": "47df39a56233149372f0c827e1c926fdaed5778c5706ba70a30fb3888edc98de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The conclusion is correct, but the explanation misidentifies M1 as an NMOS and misses that it is a PMOS source follower, so it gives the wrong reason the circuit is not a cascode.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 4784,
        "total_tokens": 5899,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4489,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 4784,
        "total_tokens": 5899,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4489,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, the circuit shown in the figure **is a cascode structure** (specifically, a classic **NMOS cascode amplifier** with a resistive load $R_D$).\n\n---\n\n### **Circuit Breakdown & How It Works**\n\nA cascode structure consists of a **Common-Source (CS)** transistor stage cascaded directly into a **Common-Gate (CG)** transistor stage:\n\n1. **Input Transistor ($M_1$) – Common-Source Stage:**\n   * **Gate:** Driven by the input signal $V_{\\text{in}}$.\n   * **Source:** Connected to ground.\n   * **Function:** Converts the input voltage signal $V_{\\text{in}}$ into a small-signal current ($i_d \\approx g_{m1} V_{\\text{in}}$).\n\n2. **Cascode Transistor ($M_2$) – Common-Gate Stage:**\n   * **Gate:** Tied to a constant DC bias voltage $V_{b1}$ (acting as an AC ground).\n   * **Source:** Connected to the drain of $M_1$.\n   * **Drain:** Connected to the output node $V_{\\text{out}}$.\n   * **Function:** Acts as a **current buffer**, passing the current from $M_1$ up to the output node while isolating $M_1$'s drain from high voltage swings.\n\n3. **Load ($R_D$):**\n   * Connected between the supply rail $V_{DD}$ and the output node $V_{\\text{out}}$ to convert the output current into an output voltage.\n\n---\n\n### **Key Advantages of this Cascode Structure**\n\n* **Reduced Miller Effect (Higher Bandwidth):** Because the source of $M_2$ is at a low-impedance node ($\\approx 1/g_{m2}$), the voltage swing at the drain of $M_1$ is very small. This eliminates the Miller amplification of $M_1$'s gate-drain capacitance ($C_{gd1}$), significantly improving high-frequency response.\n* **Higher Output Impedance & Gain:** The cascode transistor $M_2$ boosts the effective output impedance looking into its drain by approximately a factor of $(1 + g_{m2} r_{o2})$, yielding a much higher overall voltage gain.",
        "format": "markdown",
        "sha256": "a5125a8c0089e419c28de060977ffd8caaf39553b3d0ffcd9870e1b202c360c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a grounded-source common-source device. M1 is a PMOS source follower, so the structure lacks the cascode resistance boost.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 7086,
        "total_tokens": 8201,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6598,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 7086,
        "total_tokens": 8201,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6598,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit shown in the figure is a cascode structure** (specifically, an NMOS cascode amplifier).\n\n---\n\n### **Why it is a Cascode Structure:**\n\nA **cascode configuration** is defined as the series stacking of a **common-source (CS)** stage and a **common-gate (CG)** stage:\n\n1. **Input Stage ($M_1$ – Common-Source):**\n   * The input signal $V_{\\text{in}}$ is applied to the gate of $M_1$.\n   * Its lower terminal is connected to ground ($0\\text{ V}$), and its upper terminal connects to the intermediate node.\n   * It converts the input voltage $V_{\\text{in}}$ into a small-signal current ($g_{m1} V_{\\text{in}}$).\n\n2. **Cascode Stage ($M_2$ – Common-Gate):**\n   * The gate of $M_2$ is tied to a constant DC bias voltage ($V_{b1}$).\n   * Its source receives the current from $M_1$, and its drain drives the output node $V_{\\text{out}}$ and the load resistor $R_D$.\n   * It acts as a current buffer, providing high output impedance and suppressing the Miller effect on $M_1$.\n\n---\n\n### **A Technical Note on the Diagram Symbol:**\n\nIn the schematic, the source arrow of $M_1$ is drawn at its top terminal rather than the bottom terminal connected to ground:\n* **Physical Operation:** Because planar MOSFETs are symmetric devices, the terminal at the lower potential in an NMOS transistor naturally acts as the physical **source**. \n* Since the bottom terminal of $M_1$ is connected to Ground ($0\\text{ V}$) and the node between $M_1$ and $M_2$ sits at a higher potential ($V_X > 0\\text{ V}$), the bottom terminal operates as the source and the top terminal as the drain.\n* Therefore, despite the symbol drawing, $M_1$ operates as a standard common-source transistor, forming a fully functional **cascode amplifier**.",
        "format": "markdown",
        "sha256": "c4ba676f78d373200c524c5f38f25f655c4da3adf0bc25159404761f2c7bc93a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and treats M1 as a common-source NMOS. M1 is a PMOS source follower with its drain grounded, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 6323,
        "total_tokens": 7438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5864,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 6323,
        "total_tokens": 7438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5864,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** is less pronounced in a cascode amplifier because the circuit is designed to **decouple the high overall voltage gain from the input transistor’s parasitic feedback capacitance**. \n\nTo understand why this happens, let's look at the mechanism of the Miller effect, how a standard single-stage amplifier fails, and how the cascode configuration solves it.\n\n---\n\n### 1. Recapping the Miller Effect\nThe Miller effect states that in an inverting amplifier stage, any capacitance between the input and the output ($C_{feedback}$, such as the gate-drain capacitance $C_{gd}$) is multiplied by the voltage gain ($A_v$) of that specific stage:\n\n$$C_{Miller} = C_{gd} \\times (1 - A_v) \\approx C_{gd} \\times |A_v|$$\n\nIn a standard single-stage Common-Source (CS) amplifier, the single transistor provides **both** a high voltage gain ($A_v \\gg 1$) and has $C_{gd}$ directly connecting the input to the output. This results in a massive equivalent input capacitance, which severely limits the high-frequency bandwidth.\n\n---\n\n### 2. How the Cascode Solves This\nA cascode amplifier consists of two stacked transistors:\n1. **$M_1$ (Bottom transistor):** Common-Source (CS) stage — receives the input signal.\n2. **$M_2$ (Top transistor):** Common-Gate (CG) stage — connected to the output load, with its gate tied to a constant DC voltage (AC ground).\n\n```\n          V_DD\n           |\n         [ R_L ]  <-- High voltage swing here\n           |\n     +-----o----- Output\n     |     |\n    ---   |/\n   ---    |   M2 (Common-Gate: High Gain, Gate at AC Ground)\n    |     |\\\n    |      |\n    +------o----- Node X (Low voltage swing here)\n           |\n          |/\n   Input -|   M1 (Common-Source: Low Gain, drives M2)\n          |\\\n           |\n          GND\n```\n\nThe Miller effect is minimized due to two main mechanisms:\n\n#### A. The Low Voltage Gain of the Input Transistor ($M_1$)\n* The input signal is applied to the gate of $M_1$. Therefore, the Miller capacitance at the main input depends **only on the voltage gain of $M_1$** ($A_{v1} = \\frac{V_{NodeX}}{V_{in}}$), *not* the total gain of the entire circuit.\n* The load seen by the drain of $M_1$ (Node X) is the input impedance looking into the source of $M_2$. \n* The input impedance of a Common-Gate transistor ($M_2$) is extremely low: $R_{in2} \\approx \\frac{1}{g_{m2}}$.\n* Therefore, the gain of $M_1$ is:\n  $$A_{v1} \\approx -g_{m1} \\times R_{in2} = -g_{m1} \\times \\frac{1}{g_{m2}} \\approx -1 \\quad (\\text{assuming } g_{m1} \\approx g_{m2})$$\n\nBecause $M_1$ has a voltage gain of roughly **$-1$**, the Miller multiplication factor across $C_{gd1}$ is only:\n$$C_{Miller1} = C_{gd1} \\times (1 - (-1)) = 2 \\cdot C_{gd1}$$\n\nInstead of multiplying $C_{gd1}$ by hundreds (the total gain), it is only multiplied by **2**.\n\n#### B. The Isolation Provided by the Top Transistor ($M_2$)\n* The large output voltage swing occurs at the drain of $M_2$ (the actual output of the cascode circuit).\n* However, $M_2$ is in a **Common-Gate** configuration. Its gate is held at a constant DC voltage (which is an **AC ground**).\n* The parasitic capacitance $C_{gd2}$ connects the output node to the gate of $M_2$—which goes straight to AC ground. Because it connects to ground rather than back to the input signal, **no inverting feedback loop exists across $M_2$**, preventing any Miller multiplication at the output stage.\n\n---\n\n### Summary Comparison\n\n| Feature | Standard Common-Source (CS) | Cascode Amplifier |\n| :--- | :--- | :--- |\n| **Total Voltage Gain ($A_{v,total}$)** | High ($g_{m1} R_L$) | High ($g_{m1} R_L$) |\n| **Gain across input $C_{gd}$** | High ($A_{v,total}$) | Very Low ($A_{v1} \\approx -1$) |\n| **Equivalent Input Capacitance** | $C_{in} \\approx C_{gs} + C_{gd}(1 + g_m R_L)$ *(Huge)* | $C_{in} \\approx C_{gs1} + 2C_{gd1}$ *(Very Small)* |\n| **Bandwidth (Frequency Response)** | Narrow (Low cutoff frequency) | **Wide** (High cutoff frequency) |\n\n### Conclusion\nThe cascode configuration tricking the circuit: it yields the **high output voltage gain** of a multi-stage amplifier while forcing the input transistor to operate at a **gain near unity**. Because the input transistor experiences almost no voltage swing at its drain, its parasitic feedback capacitance is never significantly amplified, effectively neutralizing the Miller effect.",
        "format": "markdown",
        "sha256": "fb8da0109100e5c8925b3904e82ff521059c6eb1a55b6c1b8f209820ad6d8089"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance node at M1’s drain and derives a gain near −1, so Cgd1 is multiplied by about 2 rather than by the full stage gain. The claims that the swing is nearly zero or the effect is neutralized overstate the reduction, but the answer gives the correct mechanism and quantitative result; this is a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14,
        "output_tokens": 2652,
        "total_tokens": 2666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1433,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14,
        "output_tokens": 2652,
        "total_tokens": 2666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1433,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the **Miller effect** is less pronounced in a **cascode amplifier**, we first need to look at what causes the Miller effect in a standard single-stage amplifier, and then see how the cascode topology clever avoids it.\n\n---\n\n### 1. The Problem: Miller Effect in a Single-Stage Amplifier\nIn a standard Common-Source (or Common-Emitter) amplifier, there is a small, unwanted parasitic capacitance between the input and output terminals—specifically the **gate-drain capacitance ($C_{gd}$)** in a MOSFET or base-collector capacitance ($C_{bc}$) in a BJT.\n\nWhen the input signal changes, the output signal changes in the opposite direction with a **large voltage gain ($A_v$)**. Because the voltage across $C_{gd}$ changes by $(1 - A_v)$ times the input voltage, the effective input capacitance appears much larger:\n\n$$C_{in, \\text{Miller}} = C_{gd} (1 - A_v)$$\n\nIf the gain $A_v = -100$, the input sees a capacitance of $101 \\times C_{gd}$. This massive capacitance forms a low-pass filter with the signal source's internal resistance, severely **limiting the high-frequency bandwidth** of the amplifier.\n\n---\n\n### 2. The Solution: The Cascode Configuration\nA cascode amplifier stacks two transistors on top of each other:\n1. **$M_1$ (Bottom transistor):** Connected as a **Common-Source (CS)** stage. The signal enters here.\n2. **$M_2$ (Top transistor):** Connected as a **Common-Gate (CG)** stage. Its gate is held at a constant DC voltage (AC ground).\n\n```\n          V_DD\n           |\n         [ R_L ]\n           |\n           +-----> Output Voltage (v_out)\n           |\n       |/  M2 (Common-Gate)  <-- Gate at fixed DC (AC Ground)\n  +----|\n  |    |\\  \n  |        |  (Node X - Low impedance)\n  |        |\n  |    |/  M1 (Common-Source)\n  |----|  <-- Input Voltage (v_in)\n       |\\  \n           |\n          GND\n```\n\n---\n\n### 3. Why the Miller Effect is Suppressed in a Cascode\n\nThe suppression of the Miller effect comes down to how the cascode breaks the problem into two parts, neutralizing $C_{gd}$ in both transistors:\n\n#### A. Transistor $M_1$ (The Input Stage)\n* The output of $M_1$ (Node X) connects directly to the **source** of $M_2$.\n* Looking into the source of a Common-Gate transistor ($M_2$), the input impedance is extremely low, roughly equal to **$1 / g_{m2}$** (where $g_{m}$ is transconductance).\n* Therefore, the load resistance seen by $M_1$ is not a large resistor $R_L$, but the tiny resistance $1 / g_{m2}$.\n* The voltage gain of the first stage ($A_{v1}$) is:\n  $$A_{v1} \\approx -g_{m1} \\times \\left(\\frac{1}{g_{m2}}\\right) \\approx -1 \\quad (\\text{assuming } g_{m1} \\approx g_{m2})$$\n\n**Result for $M_1$:** Since the voltage gain across $M_1$ is only around **$-1$**, the Miller multiplication factor is $(1 - (-1)) = 2$. The capacitance $C_{gd1}$ is only doubled ($2 C_{gd1}$), **not multiplied by a huge factor like 100**.\n\n#### B. Transistor $M_2$ (The Output Stage)\n* $M_2$ provides the actual large voltage gain of the overall circuit across the load resistor $R_L$.\n* However, $M_2$ is in a **Common-Gate** configuration. Its gate is connected to AC ground.\n* The parasitic capacitance $C_{gd2}$ sits between the **gate** (which is grounded) and the **drain** (the output).\n* Because the gate does not move (it is fixed at AC ground), there is **no signal feedback** from the output back to the input of $M_2$. $C_{gd2}$ simply acts as a standard load capacitance to ground, completely bypassing the Miller multiplication phenomenon.\n\n---\n\n### Summary Comparison\n\n| Parameter | Single-Stage CS Amplifier | Cascode Amplifier |\n| :--- | :--- | :--- |\n| **Voltage Gain across $C_{gd}$** | High ($A_v \\approx -g_m R_L$) | Extremely Low ($A_{v1} \\approx -1$) |\n| **Effective Input Capacitance** | $C_{gd} \\cdot (1 + \\|A_v\\|)$ *(Very High)* | $2 \\cdot C_{gd1}$ *(Very Low)* |\n| **Bandwidth (3dB cutoff)** | Low (severely restricted) | High (extended frequency response) |\n| **Overall Voltage Gain** | High | High (provided by $M_2$) |\n\n### Conclusion\nThe cascode configuration effectively **decouples the input stage from high voltage swings**. By holding the drain of the input transistor at a nearly constant voltage, the feedback capacitor ($C_{gd1}$) never experiences a large voltage change. This keeps the input capacitance minimal, mitigating the Miller effect and allowing the amplifier to operate at much higher frequencies.",
        "format": "markdown",
        "sha256": "f9bdfee03a0b38590974bbba672c7d7018aaca859b31a50354ad58fdcdf5ab89"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance source node of M2 and the resulting gain of about −1 across Cgd1, so its Miller multiplication is about 2 rather than the full stage gain. The closing claim that the node is nearly constant slightly overstates the suppression, but the answer’s quantitative explanation is correct.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14,
        "output_tokens": 2740,
        "total_tokens": 2754,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1523,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14,
        "output_tokens": 2740,
        "total_tokens": 2754,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1523,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** is a phenomenon where the effective input capacitance of an inverting amplifier stage is multiplied by the stage's voltage gain. This parasitic capacitance limits the high-frequency response (bandwidth) of the amplifier.\n\nIn a standard single-transistor amplifier (like a Common Source or Common Emitter), the Miller effect is severe. However, in a **cascode configuration**, the Miller effect is dramatically reduced. \n\nHere is a detailed explanation of why this happens.\n\n---\n\n### 1. Recap: The Miller Effect Equation\nThe input capacitance caused by the Miller effect ($C_{M}$) across a transistor's feedback capacitance ($C_{gd}$ for MOSFETs, or $C_{\\mu}$ for BJTs) is given by:\n\n$$C_{M} = C_{gd} \\times (1 - A_v)$$\n\nWhere $A_v$ is the voltage gain across the nodes connected to that capacitor (from Gate to Drain). \n\n* If $A_v$ is large and negative (high inverting gain, e.g., $-100$), then $C_M \\approx 101 \\times C_{gd}$. This creates a massive low-pass filter at the input, severely choking high-frequency signals.\n\n---\n\n### 2. How the Cascode Topology Works\nA cascode consists of two transistors stacked on top of each other:\n1. **Input Transistor ($M_1$):** Arranged as a **Common-Source (CS)** or Common-Emitter stage.\n2. **Output Transistor ($M_2$):** Arranged as a **Common-Gate (CG)** or Common-Base stage, stacked on top of $M_1$.\n\n```\n         VDD\n          |\n         [ R_load ]\n          |\n          +-----> Output (V_out)\n          |\n        |/ M2 (Common-Gate) ---> Gate connected to fixed DC Voltage (AC Ground)\n  +-----| \n  |     |\\ \n  |       |  (Node X - Low Impedance)\n (AC gnd) + \n          |\n        |/ M1 (Common-Source)\nInput --| \n        |\\ \n          |\n         GND\n```\n\n---\n\n### 3. Why the Miller Effect is Less Pronounced\n\nThe cascode neutralizes the Miller effect through two main mechanisms: **clamping the voltage gain of the input stage** and **isolating the high-voltage swing**.\n\n#### A. Low Gain Across the Input Transistor ($M_1$)\nThe Miller capacitance that normally plagues an input transistor exists between its Gate and its Drain (Node X). \n\nFor $M_1$, the drain load is **not** the high-resistance output load ($R_{load}$). Instead, $M_1$'s drain looks directly into the **Source of $M_2$**. \n* The input impedance looking into the Source of a Common-Gate transistor ($M_2$) is extremely low: \n  $$R_{in2} \\approx \\frac{1}{g_{m2}}$$\n* The voltage gain of the first stage ($A_{v1}$, from Input to Node X) is:\n  $$A_{v1} = -g_{m1} \\times R_{in2} \\approx -g_{m1} \\times \\frac{1}{g_{m2}} \\approx -1 \\quad (\\text{if } g_{m1} = g_{m2})$$\n\nSince the voltage gain across $M_1$ is only $\\approx -1$, we plug this into the Miller equation:\n$$C_{M1} = C_{gd1} \\times (1 - (-1)) = 2 \\times C_{gd1}$$\n\n**Result:** Instead of being multiplied by a large factor (like 100×), the input capacitance of $M_1$ is only multiplied by **2**.\n\n#### B. Absence of Miller Effect in the Second Transistor ($M_2$)\nYou might wonder: *If $M_2$ provides the large voltage gain, doesn't $M_2$ suffer from the Miller effect?*\n\n**No, because its Gate is connected to a fixed DC voltage (AC Ground).**\n* For $M_2$, the feedback capacitor ($C_{gd2}$) sits between its Drain (the high-swing Output) and its Gate.\n* Because the Gate is held at a constant DC potential, there is no signal voltage on the Gate. \n* Without a voltage fluctuation on the Gate, there is no feedback mechanism to cause Miller multiplication. $C_{gd2}$ simply acts as a standard, un-multiplied capacitance load at the output node.\n\n---\n\n### Summary Comparison\n\n| Feature | Single-Stage CS Amplifier | Cascode Amplifier |\n| :--- | :--- | :--- |\n| **Overall Gain ($A_{v,\\text{total}}$)** | High ($\\approx -g_m R_L$) | High ($\\approx -g_{m1} R_L$) |\n| **Gain across Input Gate-Drain** | High ($\\approx -g_m R_L$) | **Very Low ($\\approx -1$)** |\n| **Effective Input Capacitance** | $C_{in} \\approx C_{gd} \\cdot (1 + \\|A_{v,\\text{total}}\\|)$ *(Very High)* | **$C_{in} \\approx 2 \\cdot C_{gd1}$ *(Very Low)*** |\n| **Bandwidth (High Frequency)** | Poor | **Excellent** |\n\n### Conclusion\nThe cascode trick **decouples the high gain requirement from the input node**. By placing a Common-Gate stage on top of the Common-Source stage, the cascode clamps the voltage swing at the input transistor's drain. This destroys the feedback voltage needed to create the Miller effect, allowing the amplifier to achieve both **high gain** and **broad bandwidth** simultaneously.",
        "format": "markdown",
        "sha256": "505fc19a33b7f0effd8034a28fb3fcbb62a5143d53295cbf0c825ff3ed3f79b8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the low-impedance M2 source node and gives the key result: gain across M1’s Cgd is about −1, so its effective capacitance is roughly 2Cgd rather than being multiplied by the full stage gain. But saying the feedback is “destroyed” overstates the reduction; the Miller effect remains and the voltage across Cgd is about twice the input swing.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14,
        "output_tokens": 2777,
        "total_tokens": 2791,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1497,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14,
        "output_tokens": 2777,
        "total_tokens": 2791,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1497,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, this circuit is a **Common-Gate (CG) Amplifier** with a **PMOS Active Load**. \n\n---\n\n### **1. Circuit Identification & Breakdown**\n\n* **$M_2$ (NMOS Transistor):** \n  * Acts as the main **amplifying transistor** configured in a **Common-Gate (CG)** arrangement.\n  * **Input ($V_{\\text{in}}$):** Applied to the **Source** of $M_2$.\n  * **Gate:** Connected to a constant DC bias voltage $V_{b1}$ (acting as an AC ground).\n  * **Output ($V_{\\text{out}}$):** Taken from the **Drain** of $M_2$.\n\n* **$M_1$ (PMOS Transistor):** \n  * Acts as an **active load** (current source load).\n  * **Source:** Connected to $V_{DD}$.\n  * **Gate:** Biased with a constant DC voltage $V_{b2}$.\n  * **Drain:** Connected to the drain of $M_2$ at the output node $V_{\\text{out}}$.\n  * Provides a high output impedance ($r_{o1}$) to maximize voltage gain.\n\n---\n\n### **2. Small-Signal Analysis**\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\nSince the input is fed into the source of the NMOS transistor, the circuit is **non-inverting**.\n\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx (g_{m2} + g_{mb2}) \\cdot (r_{o1} \\parallel r_{o2})$$\n\nIf body effect is neglected ($g_{mb2} \\approx 0$):\n$$A_v \\approx g_{m2} \\cdot (r_{o1} \\parallel r_{o2})$$\n\nWhere:\n* $g_{m2}$: Transconductance of $M_2$\n* $g_{mb2}$: Body-effect transconductance of $M_2$\n* $r_{o1}, r_{o2}$: Output resistances (channel-length modulation) of $M_1$ and $M_2$\n\n#### **B. Input Impedance ($R_{\\text{in}}$)**\nLooking into the source of $M_2$:\n\n$$R_{\\text{in}} \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n\n*(Note: The input impedance is low, which is characteristic of Common-Gate stages.)*\n\n#### **C. Output Impedance ($R_{\\text{out}}$)**\nLooking into the output node $V_{\\text{out}}$ (assuming an ideal voltage source at $V_{\\text{in}}$ with zero source resistance):\n\n$$R_{\\text{out}} = r_{o1} \\parallel r_{o2}$$\n\n---\n\n### **3. Key Characteristics & Features**\n\n1. **Non-Inverting Gain:** Unlike a Common-Source amplifier, the output is in phase with the input.\n2. **Low Input Impedance:** Makes it suitable for matching to low-impedance sources (e.g., $50\\,\\Omega$ antennas in RF applications).\n3. **High Bandwidth (No Miller Effect):** Because the gate of $M_2$ is at AC ground, the gate-drain capacitance $C_{gd2}$ does not undergo Miller multiplication, offering superior high-frequency response compared to common-source configurations.\n4. **Current Buffer Action:** Converts a low-impedance current input into a high-impedance voltage output.\n\n---\n\n### **4. Common Applications**\n* **RF Low-Noise Amplifiers (LNAs):** Used for 50-ohm input impedance matching.\n* **Cascode Amplifiers:** Serves as the upper stage of a cascode topology to boost output impedance and bandwidth.\n* **Current Buffers:** Receives current signals from low-impedance nodes and drives high-impedance nodes.",
        "format": "markdown",
        "sha256": "4c352a074f388ef6074d2c1df0e35cbbe0bb0e97f2eddd56bc438b09211fb5b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, source-driven input, bias voltages, non-inverting gain, and low input resistance. The gain expression appropriately includes body effect; the simplified input-resistance estimate does not overturn the essential analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 2244,
        "total_tokens": 3355,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1371,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 2244,
        "total_tokens": 3355,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1371,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed analysis of the given analog integrated circuit.\n\n---\n\n### **1. Circuit Identification**\nThe circuit is a **Common-Gate (CG) Amplifier** with a **PMOS Active Current-Source Load**.\n\n* **$M_2$ (NMOS Transistor):** Functions as the primary amplifying device in the common-gate configuration.\n* **$M_1$ (PMOS Transistor):** Functions as an active load / current source to provide a high small-signal output resistance.\n\n---\n\n### **2. Component Breakdown & Operating Roles**\n\n| Component | Type | Terminal Connections | Role / Function |\n| :--- | :--- | :--- | :--- |\n| **$M_2$** | NMOS | **Gate:** $V_{b1}$ (DC Bias)<br>**Source:** $V_{\\text{in}}$ (Input Signal)<br>**Drain:** $V_{\\text{out}}$ (Output Signal) | Gain stage (Common-Gate) |\n| **$M_1$** | PMOS | **Gate:** $V_{b2}$ (DC Bias)<br>**Source:** $V_{DD}$<br>**Drain:** $V_{\\text{out}}$ | Active current-source load |\n\n---\n\n### **3. Small-Signal Analysis**\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\nApplying a small-signal input $v_{\\text{in}}$ to the source of $M_2$:\n* The gate of $M_2$ is AC-grounded ($v_{g2} = 0$).\n* The gate-source voltage change is $v_{gs2} = -v_{\\text{in}}$.\n* The body-source voltage change is $v_{bs2} = -v_{\\text{in}}$ (assuming the bulk is grounded).\n\nIncluding channel-length modulation ($r_{o1}, r_{o2}$) and body effect ($g_{mb2}$):\n\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{(g_{m2} + g_{mb2}) r_{o2} + 1}{r_{o1} + r_{o2}} \\cdot r_{o1}$$\n\nAssuming $(g_{m2} + g_{mb2}) r_{o2} \\gg 1$:\n\n$$A_v \\approx (g_{m2} + g_{mb2}) (r_{o1} \\parallel r_{o2})$$\n\n* **Key Observation:** The gain is **positive** (non-inverting), unlike a Common-Source amplifier which provides inverted gain.\n\n---\n\n#### **B. Input Impedance ($R_{\\text{in}}$)**\nLooking into the source of $M_2$ with the output node loaded by $r_{o1}$:\n\n$$R_{\\text{in}} = \\frac{r_{o1} + r_{o2}}{1 + (g_{m2} + g_{mb2}) r_{o2}} \\approx \\frac{1}{g_{m2} + g_{mb2}} + \\frac{r_{o1}}{(g_{m2} + g_{mb2}) r_{o2}}$$\n\nIf $r_{o1} \\ll r_{o2}$ or under basic ideal conditions:\n\n$$R_{\\text{in}} \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n\n* **Key Observation:** The input impedance is **low**, which makes it suitable for current-mode signals or low-impedance sources.\n\n---\n\n#### **C. Output Impedance ($R_{\\text{out}}$)**\nLooking into the output node ($V_{\\text{out}}$) with the input grounded ($v_{\\text{in}} = 0$):\n\n$$R_{\\text{out}} = r_{o1} \\parallel R_{\\text{out,M2}}$$\n\nSince the input source is ideally zero resistance ($R_S = 0$), $R_{\\text{out,M2}} = r_{o2}$:\n\n$$R_{\\text{out}} = r_{o1} \\parallel r_{o2}$$\n\n* **Key Observation:** The output impedance is **high**, determined by the parallel combination of the output resistances of both transistors.\n\n---\n\n### **4. Key Performance Characteristics & Advantages**\n\n1. **No Miller Effect:** \n   Since the gate of $M_2$ is at an AC ground, the gate-drain capacitance ($C_{gd2}$) is connected between the output and AC ground (rather than between input and output). Therefore, it does not suffer from Miller multiplication, giving the common-gate topology **excellent high-frequency performance**.\n\n2. **Current Buffer Action:** \n   It takes a signal current at a low-impedance input node and delivers it to a high-impedance output node.\n\n3. **Impedance Matching:** \n   The low input impedance ($\\approx 1/g_m$) makes it easy to match with standard transmission lines or antennas (e.g., $50\\,\\Omega$) in RF applications.\n\n---\n\n### **5. Summary Table**\n\n| Parameter | Expression / Value | Notes |\n| :--- | :--- | :--- |\n| **Configuration** | Common-Gate with Active Load | Non-inverting voltage gain |\n| **Voltage Gain ($A_v$)** | $\\approx (g_{m2} + g_{mb2})(r_{o1} \\parallel r_{o2})$ | Positive (Non-inverting) |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\approx \\frac{1}{g_{m2} + g_{mb2}}$ | Low |\n| **Output Resistance ($R_{\\text{out}}$)** | $r_{o1} \\parallel r_{o2}$ | High |\n| **Primary Applications** | RF front-ends, high-frequency amplifiers, wideband current buffers, cascode stages |",
        "format": "markdown",
        "sha256": "57bc8d028467273bebd6731a0c206b4cf301466b7bb6a6df8ed3f18d72a828ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places Vin at M2’s source, identifies both bias voltages, and gives the non-inverting gain and low input resistance. Its gain and input-resistance formulas match the golden solution; the loose extra Rin approximation does not undermine the essential analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 4179,
        "total_tokens": 5290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 4179,
        "total_tokens": 5290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Common-Gate (CG) Amplifier** with a **PMOS Active Load** (current source load).\n\n---\n\n### **1. Circuit Components & Configuration**\n\n* **Amplifying Transistor ($M_2$)**:\n  * **Type**: NMOS transistor.\n  * **Input ($V_{\\text{in}}$)**: Applied to the **Source** of $M_2$.\n  * **Gate**: Connected to a fixed DC bias voltage $V_{b1}$ (AC ground).\n  * **Drain**: Connected to the output node $V_{\\text{out}}$.\n\n* **Active Load Transistor ($M_1$)**:\n  * **Type**: PMOS transistor operating as a constant current source load.\n  * **Gate**: Connected to a fixed DC bias voltage $V_{b2}$.\n  * **Source**: Connected to the positive power supply supply rail $V_{DD}$.\n  * **Drain**: Connected to the output node $V_{\\text{out}}$.\n\n---\n\n### **2. Small-Signal Analysis**\n\nLet:\n* $g_{m2}$ = transconductance of $M_2$\n* $g_{mb2}$ = body-effect transconductance of $M_2$ (if body effect is included)\n* $r_{o1}, r_{o2}$ = output resistances (channel-length modulation) of $M_1$ and $M_2$\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\nApplying Kirchhoff's Current Law (KCL) at the output node $V_{\\text{out}}$:\n\n$$\\frac{v_{\\text{out}}}{r_{o1}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_{o2}} - (g_{m2} + g_{mb2})(-v_{\\text{in}}) = 0$$\n\nSolving for the voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n\n$$A_v = \\frac{(g_{m2} + g_{mb2}) + \\frac{1}{r_{o2}}}{\\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} = \\frac{1 + (g_{m2} + g_{mb2})r_{o2}}{r_{o1} + r_{o2}} \\cdot r_{o1}$$\n\n**Simplified Voltage Gain** (assuming $(g_{m2} + g_{mb2})r_{o2} \\gg 1$):\n$$A_v \\approx (g_{m2} + g_{mb2}) (r_{o1} \\parallel r_{o2})$$\n\n> **Note**: Unlike a Common-Source stage, the voltage gain is **positive** (non-inverting).\n\n---\n\n#### **B. Input Resistance ($R_{\\text{in}}$)**\nLooking into the source of $M_2$:\n\n$$R_{\\text{in}} = \\frac{r_{o1} + r_{o2}}{1 + (g_{m2} + g_{mb2})r_{o2}} \\approx \\frac{1}{g_{m2} + g_{mb2}} + \\frac{r_{o1}}{(g_{m2} + g_{mb2})r_{o2}}$$\n\n* If $r_{o1} \\ll r_{o2}$, $R_{\\text{in}} \\approx \\frac{1}{g_{m2} + g_{mb2}}$ (**Low input resistance**).\n\n---\n\n#### **C. Output Resistance ($R_{\\text{out}}$)**\nLooking into the output node $V_{\\text{out}}$:\n\n* If the input is driven by a source with internal resistance $R_S$:\n  $$R_{\\text{out}} = r_{o1} \\parallel \\left[ r_{o2} + \\left(1 + (g_{m2} + g_{mb2})r_{o2}\\right) R_S \\right]$$\n\n* For an ideal input voltage source ($R_S = 0$):\n  $$R_{\\text{out}} = r_{o1} \\parallel r_{o2}$$\n\n---\n\n### **3. Key Characteristics & Features**\n\n1. **Non-Inverting Amplifier**: Positive gain ($A_v > 0$).\n2. **Low Input Impedance**: Approximately $\\frac{1}{g_{m2}}$, making it well-suited for matching low-impedance sources (e.g., $50\\,\\Omega$ antennas).\n3. **High Output Impedance**: Roughly $r_{o1} \\parallel r_{o2}$.\n4. **Superior High-Frequency Performance**: Because the gate of $M_2$ is tied to AC ground, the gate-drain capacitance ($C_{gd}$) does not experience the **Miller Effect**. This yields a much wider bandwidth compared to a Common-Source stage.\n5. **Current Buffer**: Acts as a current buffer by accepting current at low input impedance and delivering it to a high-impedance output node.\n\n---\n\n### **4. Typical Applications**\n* **RF Front-Ends / Low-Noise Amplifiers (LNAs)**: Used for 50-ohm input impedance matching.\n* **Cascode Stages**: Combined with a Common-Source transistor to boost output impedance and gain.\n* **Wideband Amplifiers**: High-frequency communication circuits where Miller effect reduction is critical.",
        "format": "markdown",
        "sha256": "139a78df0e49b5af95dca30b014836ec7c36f59a980c6fceb13f5d61d1a81b55"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, recognizes the bias voltages and non-inverting gain, and gives the equivalent gain expression including body effect. The low input resistance is also correctly described.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 5064,
        "total_tokens": 6175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3874,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 5064,
        "total_tokens": 6175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3874,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure has **2 poles**.\n\n### Explanation:\n\n1. **Identify the signal-carrying nodes:**\n   - **Node 1 (Gate of $M_1$):** Connected to $V_{\\text{in}}$ via $R_S$.\n   - **Node 2 (Output Node $V_{\\text{out}}$):** Connected to the drains of $M_1$ and $M_2$.\n   - All other terminals (sources, bulks, and the gate of $M_2$) are connected to AC ground.\n\n2. **Group the capacitors:**\n   - Between Node 1 and Ground: $C_{\\text{GS}}$\n   - Between Node 1 and Node 2: $C_{\\text{GD}}$\n   - Between Node 2 and Ground: $C_{\\text{DB}}$, $C_{\\text{GD2}}$, and $C_{\\text{DB2}}$ (these three capacitors are connected in parallel, creating an equivalent capacitance to ground $C_{\\text{out}} = C_{\\text{DB}} + C_{\\text{GD2}} + C_{\\text{DB2}}$).\n\n3. **Determine the number of poles:**\n   - Since there are only **2 independent nodes** with capacitance to ground, the transfer function $\\frac{V_{\\text{out}}(s)}{V_{\\text{in}}(s)}$ is of the second order.\n   - Therefore, the circuit has **2 poles** (one predominantly associated with the input node and one with the output node).",
        "format": "markdown",
        "sha256": "cd1ca70f4792ff3f31765a84d0328982aab95f87a5c373353c2151d6a07cbc7f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two dynamic nodes and assigns the capacitors to the gate and output nodes as shown, supporting the conclusion of two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 1703,
        "total_tokens": 2796,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1377,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 1703,
        "total_tokens": 2796,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1377,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\n### Explanation:\n\n1. **Identify the signal nodes** in the circuit:\n   * **Node 1 (Gate of $M_1$):** Connected to the input through $R_S$.\n   * **Node 2 (Output node $V_{\\text{out}}$):** Connected to the drains of $M_1$ and $M_2$.\n\n2. **Analyze the capacitors at each node:**\n   * At **Node 1 (Gate of $M_1$)**:\n     * $C_{\\text{GS}}$ connects Node 1 to ground.\n     * $C_{\\text{GD}}$ connects Node 1 to Node 2 (bridging capacitor).\n   * At **Node 2 ($V_{\\text{out}}$)**:\n     * $C_{\\text{DB}}$, $C_{\\text{GD2}}$, and $C_{\\text{DB2}}$ are all connected between Node 2 and AC ground in parallel. They combine into a single equivalent capacitance:\n       $$C_{\\text{out}} = C_{\\text{DB}} + C_{\\text{GD2}} + C_{\\text{DB2}}$$\n\n3. **Determine the number of poles:**\n   * Since there are **2 independent signal nodes** with capacitance to ground/other nodes, the transfer function $\\frac{V_{\\text{out}}(s)}{V_{\\text{in}}(s)}$ is a second-order system.\n   * Therefore, the circuit has **2 poles** (one predominantly determined by the gate node RC time constant and the other by the output node RC time constant).",
        "format": "markdown",
        "sha256": "9c55ab9fe35c2cdf83ab2663d86a61d0266d5f7a74dd374694f63808d18879f3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent nodes—the M1 gate and output—and assigns the relevant capacitances to them, including the output capacitances to AC ground.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 1686,
        "total_tokens": 2779,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1342,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 1686,
        "total_tokens": 2779,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1342,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the number of poles in this circuit, we can analyze the independent signal nodes where energy (charge) can be stored:\n\n### 1. Identify Independent Signal Nodes (excluding ground)\n* **Node 1 ($V_{\\text{G1}}$):** The gate of transistor $M_1$.\n* **Node 2 ($V_{\\text{out}}$):** The output node connected to the drains of both $M_1$ and $M_2$.\n\n*(Note: The gate and source of $M_2$, as well as the source of $M_1$, are all connected to AC ground, so they do not introduce additional independent signal nodes).*\n\n---\n\n### 2. Analyze the Capacitors Connected to Each Node\n* **At Node 1 ($V_{\\text{G1}}$):**\n  * $C_{\\text{GS}}$ is connected between Node 1 and AC ground.\n  * $C_{\\text{GD}}$ bridges Node 1 and Node 2.\n\n* **At Node 2 ($V_{\\text{out}}$):**\n  * $C_{\\text{DB}}$, $C_{\\text{GD2}}$, and $C_{\\text{DB2}}$ are all connected in parallel between the output node and AC ground. They combine into a single equivalent capacitance:\n    $$C_{\\text{out}} = C_{\\text{DB}} + C_{\\text{GD2}} + C_{\\text{DB2}}$$\n\n---\n\n### 3. Conclusion\nSince there are **2 independent non-ground signal nodes** with capacitive elements:\n1. **Input pole:** Formed primarily at the gate of $M_1$ (taking into account the Miller effect of $C_{\\text{GD}}$).\n2. **Output pole:** Formed at the output node $V_{\\text{out}}$.\n\nTherefore, the circuit has **2 poles**.",
        "format": "markdown",
        "sha256": "c45e8bd1b8320d1fb906ec17eb84154e73ce25fd0056a3591ac38083b4683849"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the gate of M1 and the output as the two independent capacitive nodes, assigns the capacitors to the right nodes, and concludes there are two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 1898,
        "total_tokens": 2991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 1898,
        "total_tokens": 2991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **1. Circuit Description and Topology**\n\nThe given circuit is a **modified cascode amplifier** (sometimes referred to as a *driven-gate cascode* or *dual-gate cascode* amplifier). \n\n* **$M_1$** acts as the main common-source driver transistor with its source grounded.\n* **$M_2$** acts as a cascode transistor, but unlike a standard cascode configuration (where the gate is connected to a fixed DC voltage), its gate is connected to the input signal $V_{\\text{in}}$ alongside the gate of $M_1$.\n* **$R_D$** is the drain load resistor connected between the supply voltage $V_{\\text{DD}}$ and the output node $V_{\\text{out}}$.\n\n---\n\n### **2. DC Biasing and Operation Conditions**\n\nFor both transistors to operate in the **saturation region**:\n\n1. **For $M_1$:**\n   $$V_{\\text{DS1}} = V_X \\ge V_{\\text{GS1}} - V_{\\text{TH1}} = V_{\\text{in}} - V_{\\text{TH1}}$$\n\n2. **For $M_2$:**\n   $$V_{\\text{GS2}} = V_{\\text{in}} - V_X$$\n   $$V_{\\text{DS2}} = V_{\\text{out}} - V_X \\ge V_{\\text{GS2}} - V_{\\text{TH2}} = (V_{\\text{in}} - V_X) - V_{\\text{TH2}} \\implies V_{\\text{out}} \\ge V_{\\text{in}} - V_{\\text{TH2}}$$\n\n#### **Key Practical Observation:**\nSince the same DC current flows through both transistors ($I_{D1} = I_{D2}$):\n* If both transistors have identical threshold voltages ($V_{\\text{TH1}} = V_{\\text{TH2}}$) and dimensions:\n  $$V_{\\text{GS1}} = V_{\\text{GS2}} \\implies V_{\\text{in}} = V_{\\text{in}} - V_X \\implies V_X = 0\\text{ V}$$\n* If $V_X = 0\\text{ V}$, $M_1$ operates in the **linear (triode) region** because $V_{\\text{DS1}} < V_{\\text{GS1}} - V_{\\text{TH1}}$.\n* To keep $M_1$ in saturation, $M_2$ must be sized significantly larger than $M_1$ $\\left((W/L)_2 > (W/L)_1\\right)$ or have a lower threshold voltage ($V_{\\text{TH2}} < V_{\\text{TH1}}$).\n\n---\n\n### **3. Small-Signal Voltage Gain ($A_v$)**\n\n#### **Case 1: Ideal Transistors (Neglecting Channel-Length Modulation, $r_o \\to \\infty$)**\n\nApplying KCL at the intermediate node $X$ (drain of $M_1$ / source of $M_2$):\n$$i_{d1} = i_{d2}$$\n$$g_{m1} v_{\\text{in}} = g_{m2} v_{\\text{gs2}} = g_{m2} (v_{\\text{in}} - v_x)$$\n\nSolving for node voltage $v_x$:\n$$v_x = \\left(1 - \\frac{g_{m1}}{g_{m2}}\\right) v_{\\text{in}}$$\n\nThe output voltage is given by:\n$$v_{\\text{out}} = -i_{d2} R_D = -g_{m1} R_D v_{\\text{in}}$$\n\nThus, the ideal voltage gain is:\n$$\\mathbf{A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m1} R_D}$$\n\n> **Note:** Ideally, driving the gate of $M_2$ does not change the transconductance gain compared to a standard common-source stage, as the overall signal current sent to $R_D$ is strictly determined by $g_{m1} v_{\\text{in}}$.\n\n---\n\n#### **Case 2: Including Channel-Length Modulation ($r_{o1}, r_{o2}$ finite)**\n\nTaking transistor output resistances $r_{o1}$ and $r_{o2}$ into account:\n\n1. **KCL at Node $X$:**\n   $$g_{m1} v_{\\text{in}} + \\frac{v_x}{r_{o1}} = g_{m2}(v_{\\text{in}} - v_x) + \\frac{v_{\\text{out}} - v_x}{r_{o2}}$$\n\n2. **KCL at Output Node $V_{\\text{out}}$:**\n   $$\\frac{v_{\\text{out}}}{R_D} + g_{m2}(v_{\\text{in}} - v_x) + \\frac{v_{\\text{out}} - v_x}{r_{o2}} = 0$$\n\nSolving these equations simultaneously yields the exact small-signal gain:\n\n$$A_v = -\\frac{\\left[ g_{m2} r_{o2} + g_{m1} r_{o1} (1 + g_{m2} r_{o2}) \\right] R_D}{r_{o1} + r_{o2} + g_{m2} r_{o1} r_{o2} + R_D}$$\n\nSince typically $g_{m2} r_{o2} \\gg 1$ and $g_{m1} r_{o1} \\gg 1$, this simplifies to:\n\n$$\\mathbf{A_v \\approx -g_{m1} \\left( R_D \\parallel R_{\\text{out, device}} \\right)}$$\n\nwhere $R_{\\text{out, device}} \\approx g_{m2} r_{o1} r_{o2}$. \n\nIf $R_D \\ll g_{m2} r_{o1} r_{o2}$, the gain reduces back to $\\mathbf{-g_{m1} R_D}$.\n\n---\n\n### **4. Input and Output Impedance**\n\n1. **Input Impedance ($R_{\\text{in}}$):**\n   $$R_{\\text{in}} \\to \\infty \\quad \\text{(at low frequencies)}$$\n   Because $V_{\\text{in}}$ drives only MOSFET gates, the DC input resistance is extremely high.\n\n2. **Output Impedance ($R_{\\text{out}}$):**\n   To find the output resistance looking into $V_{\\text{out}}$, we set $V_{\\text{in}} = 0$:\n   * When $V_{\\text{in}} = 0$, both gates are connected to AC ground.\n   * The circuit reduces to a standard cascode output stage structure.\n   \n   The output resistance of the transistor pair is:\n   $$R_{\\text{out, device}} = r_{o2} + r_{o1} (1 + g_{m2} r_{o2}) \\approx g_{m2} r_{o1} r_{o2}$$\n\n   Including the load resistor $R_D$:\n   $$\\mathbf{R_{\\text{out}} = R_D \\parallel \\left[ r_{o1} + r_{o2} + g_{m2} r_{o1} r_{o2} \\right] \\approx R_D \\parallel (g_{m2} r_{o1} r_{o2})}$$\n\n---\n\n### **5. Summary of Circuit Characteristics**\n\n| Parameter | Formula / Value | Description |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\approx -g_{m1} R_D$ | Similar to a standard CS stage for moderate $R_D$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\approx R_D \\parallel (g_{m2} r_{o1} r_{o2})$ | High output impedance (Cascode benefit) |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\infty$ | Gate-driven |\n| **Main Advantage** | High output isolation & high output resistance without needing a separate bias voltage for $M_2$'s gate. |",
        "format": "markdown",
        "sha256": "9d59d98316521a1cc1ec819c94424a6627572e10f0f15b9c46757553367a29bd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that identical devices with common gates put M1 in triode, but misses the key longer-effective-channel behavior and instead analyzes the circuit as a cascode, claiming a cascode-style gm·ro output-resistance boost.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 8072,
        "total_tokens": 9191,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6238,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 8072,
        "total_tokens": 9191,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6238,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed analysis of the circuit shown in the diagram.\n\n---\n\n### **1. Circuit Identification and Overview**\n\n* **Topology:** Tied-Gate Cascode (or Composite Transistor / Self-Cascode) Common-Source Amplifier.\n* **Components:**\n  * **$M_1$**: Lower NMOS transistor (input transistor).\n  * **$M_2$**: Upper NMOS transistor (cascode transistor).\n  * **$R_D$**: Drain load resistor.\n  * **Connections:** The input signal $V_{\\text{in}}$ is applied to the **gates of both $M_1$ and $M_2$**. The source of $M_1$ is grounded, its drain is connected to the source of $M_2$ (node $X$), and the output $V_{\\text{out}}$ is taken from the drain of $M_2$.\n\n---\n\n### **2. DC Operating Point & Biasing Analysis**\n\nFor both transistors to operate in the **saturation region** (active region for amplification):\n\n1. **For $M_1$:**\n   $$V_{DS1} = V_X \\ge V_{GS1} - V_{TH1} = V_{\\text{in}} - V_{TH1}$$\n\n2. **For $M_2$:**\n   $$V_{DS2} = V_{\\text{out}} - V_X \\ge V_{GS2} - V_{TH2} = (V_{\\text{in}} - V_X) - V_{TH2} \\implies V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH2}$$\n\n#### **Sizing Consideration:**\n* Note that $V_{GS2} = V_{\\text{in}} - V_X < V_{GS1} = V_{\\text{in}}$ because $V_X > 0$.\n* If $M_1$ and $M_2$ have the same threshold voltage ($V_{TH1} \\approx V_{TH2}$) and equal aspect ratios $(W/L)_1 = (W/L)_2$, forcing equal drain currents ($I_{D1} = I_{D2}$) would push $V_X \\to 0$, forcing $M_1$ into the **triode (linear) region**.\n* To keep **both $M_1$ and $M_2$ in saturation**, $M_2$ must be sized wider than $M_1$ (i.e., $(W/L)_2 > (W/L)_1$), or $M_2$ must have a lower threshold voltage.\n\n---\n\n### **3. Small-Signal Analysis**\n\nLet:\n* $g_{m1}, r_{o1}$ be the transconductance and output resistance of $M_1$.\n* $g_{m2}, g_{mb2}, r_{o2}$ be the transconductance, body-effect transconductance, and output resistance of $M_2$.\n\n#### **A. Short-Circuit Transconductance ($G_m$)**\nTo find the overall transconductance $G_m$, we short the output to AC ground ($v_{\\text{out}} = 0$) and calculate $i_{\\text{out}} / v_{\\text{in}}$:\n\n1. **At Node $X$ (KCL):**\n   $$i_{d1} = i_{d2}$$\n   $$g_{m1} v_{\\text{in}} + \\frac{v_X}{r_{o1}} = g_{m2}(v_{\\text{in}} - v_X) - g_{mb2} v_X - \\frac{v_X}{r_{o2}}$$\n\n2. Solving for node voltage $v_X$:\n   $$v_X \\left( g_{m2} + g_{mb2} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}} \\right) = (g_{m2} - g_{m1}) v_{\\text{in}}$$\n\n3. The short-circuit output current is:\n   $$i_{\\text{sc}} = g_{m1} v_{\\text{in}} + \\frac{v_X}{r_{o1}}$$\n\n* **Neglecting channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$):**\n  $$i_{\\text{sc}} = g_{m1} v_{\\text{in}} \\implies G_m = g_{m1}$$\n\n> **Key Insight:** Even though $V_{\\text{in}}$ is connected to $M_2$'s gate, the overall transconductance is dominated by $M_1$ ($G_m \\approx g_{m1}$), exactly as in a standard cascode amplifier.\n\n---\n\n#### **B. Output Resistance ($R_{\\text{out}}$)**\nTo find the output resistance looking into the drain of $M_2$, set $v_{\\text{in}} = 0$ and apply a test voltage $v_{\\text{test}}$ at the output:\n\n1. With $v_{\\text{in}} = 0$, $M_1$ acts as a simple resistance $r_{o1}$ to ground.\n2. For $M_2$, $v_{gs2} = -v_X$ and $v_{bs2} = -v_X$.\n\nUsing standard cascode formulas:\n$$R_{\\text{out}} = r_{o1} + r_{o2} + (g_{m2} + g_{mb2}) r_{o1} r_{o2} \\approx (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\n---\n\n#### **C. Overall Voltage Gain ($A_v$)**\nThe total output resistance including $R_D$ is $R_{\\text{out,total}} = R_{\\text{out}} \\parallel R_D$.\n\nThe small-signal voltage gain is:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -G_m (R_{\\text{out}} \\parallel R_D)$$\n\n* **If $R_D \\ll R_{\\text{out}}$ (resistance-loaded):**\n  $$A_v \\approx -g_{m1} R_D$$\n\n* **If loaded with an ideal current source ($R_D \\to \\infty$):**\n  $$A_{v,\\text{max}} \\approx -g_{m1} (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\n---\n\n### **4. Summary & Comparison**\n\n| Parameter | Standard Cascode ($V_{G2} = V_{\\text{bias}}$) | Tied-Gate Cascode (This Circuit) |\n| :--- | :--- | :--- |\n| **Transconductance ($G_m$)** | $g_{m1}$ | $\\approx g_{m1}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\approx (g_{m2} + g_{mb2}) r_{o1} r_{o2}$ | $\\approx (g_{m2} + g_{mb2}) r_{o1} r_{o2}$ |\n| **Voltage Gain ($A_v$)** | $\\approx -g_{m1} R_D$ | $\\approx -g_{m1} R_D$ |\n| **DC Bias Requirements** | Requires an extra bias voltage $V_{\\text{bias}}$ | **No extra bias voltage required** |\n\n### **Conclusion:**\nThis circuit provides the high output impedance and high intrinsic gain of a cascode amplifier without requiring an additional DC bias voltage generator for the cascode transistor's gate. However, it requires careful sizing of $(W/L)_2 > (W/L)_1$ to ensure $M_1$ remains in saturation.",
        "format": "markdown",
        "sha256": "40dd72f65aca3ea7d0c0466ffb1e97d51a43a08594be8b00f0785d019579a3c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It treats the tied-gate stack as a true cascode, assumes both devices can operate in saturation, and applies the cascode output-resistance formula. It misses the essential result: the lower device operates in triode and the pair acts approximately like one NMOS with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 7635,
        "total_tokens": 8754,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5898,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 7635,
        "total_tokens": 8754,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5898,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete step-by-step analysis of the given MOS circuit.\n\n---\n\n### 1. Circuit Topology & Overview\n\n* **Configuration:** This is a **cascode amplifier variant** where both the main input transistor ($M_1$) and the cascode transistor ($M_2$) have their gates connected together to the input signal $V_{\\text{in}}$.\n* **Transistors:** $M_1$ and $M_2$ are n-channel MOSFETs (NMOS) connected in series (stacked).\n* **Load:** A resistor $R_D$ is connected between the supply voltage $V_{DD}$ and the drain of $M_2$.\n* **Output:** Taken from the drain node of $M_2$ ($V_{\\text{out}}$).\n\n---\n\n### 2. Large-Signal (DC) Operation\n\n1. **Gate Voltages:**\n   $$V_{G1} = V_{G2} = V_{\\text{in}}$$\n\n2. **Gate-Source Voltages:**\n   * For transistor $M_1$: \n     $$V_{GS1} = V_{\\text{in}}$$\n   * For transistor $M_2$: \n     $$V_{GS2} = V_{\\text{in}} - V_{S2} = V_{GS1} - V_{DS1}$$\n\n3. **Operating Region:**\n   * Since $V_{GS2} < V_{GS1}$, for both transistors to carry the exact same DC drain current ($I_{D1} = I_{D2}$):\n     * If both transistors have identical dimensions ($W/L$), $M_1$ must operate in the **triode (linear) region** ($V_{DS1}$ is small) so its current matches $M_2$'s current.\n     * Alternatively, if both transistors are to remain in the **saturation region**, $M_2$ must be sized significantly wider than $M_1$ ($[W/L]_2 > [W/L]_1$).\n\n---\n\n### 3. Small-Signal Analysis\n\nTo find the voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$, we apply the small-signal model.\n\n#### **A. Ideal Case (Neglecting Channel-Length Modulation, $r_o \\to \\infty$)**\n\n* Small-signal current through $M_1$:\n  $$i_{d1} = g_{m1} v_{\\text{in}}$$\n\n* Small-signal current through $M_2$:\n  $$i_{d2} = g_{m2} v_{gs2} = g_{m2} (v_{\\text{in}} - v_{s2})$$\n\n* Since $i_{d1} = i_{d2}$:\n  $$g_{m1} v_{\\text{in}} = g_{m2} (v_{\\text{in}} - v_{s2}) \\implies v_{s2} = \\left(1 - \\frac{g_{m1}}{g_{m2}}\\right) v_{\\text{in}}$$\n\n* The output voltage $v_{\\text{out}}$ across the load $R_D$:\n  $$v_{\\text{out}} = -i_{d2} R_D = -g_{m1} R_D v_{\\text{in}}$$\n\n* **Ideal Voltage Gain:**\n  $$\\bbox[10px,border:2px solid #000]{A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m1} R_D}$$\n\n---\n\n#### **B. Realistic Case (Including Channel-Length Modulation $r_{o1}, r_{o2}$ and Body Effect $g_{mb2}$)**\n\n1. **Output Resistance ($R_{\\text{out}}$):**\n   Looking into the drain of $M_2$ (with $V_{\\text{in}} = 0$), $M_2$ acts as a standard cascode device with $M_1$'s output resistance $r_{o1}$ at its source:\n   $$R_{\\text{out}} \\approx [1 + (g_{m2} + g_{mb2}) r_{o2}] r_{o1} + r_{o2} \\approx (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\n2. **Effective Transconductance ($G_m$):**\n   Shorting the output to ground to find the overall transconductance:\n   $$G_m \\approx g_{m1} + \\frac{g_{m2}}{(g_{m2} + g_{mb2}) r_{o1}} \\approx g_{m1}$$\n\n3. **Overall Voltage Gain:**\n   $$A_v = -G_m (R_{\\text{out}} \\parallel R_D)$$\n\n   $$\\bbox[10px,border:2px solid #000]{A_v \\approx -g_{m1} \\left( [(g_{m2} + g_{mb2}) r_{o1} r_{o2}] \\parallel R_D \\right)}$$\n\n---\n\n### 4. Key Summary & Characteristics\n\n| Parameter | Expression / Property | Description |\n| :--- | :--- | :--- |\n| **Transconductance ($G_m$)** | $\\approx g_{m1}$ | Primarily determined by $M_1$. |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\approx (g_{m2} + g_{mb2}) r_{o1} r_{o2}$ | High output impedance (boosted by cascode $M_2$). |\n| **Voltage Gain ($A_v$)** | $\\approx -g_{m1} R_D$ | Inverting voltage gain. |\n| **Biasing Advantage** | Self-biased gate | Eliminates the need for an independent DC bias voltage for the cascode transistor $M_2$. |",
        "format": "markdown",
        "sha256": "8b8c357d78b75628e06c866de53443f2319ceca426f30e0978a4df3a84ce1c40"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the series, common-gate NMOS structure and notes that M1 is in triode for identical devices, but misses the central longer-effective-channel behavior. Its cascode output-resistance and gain-boosting analysis is inapplicable and leads to the wrong conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 7902,
        "total_tokens": 9021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6592,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 7902,
        "total_tokens": 9021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6592,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **single-ended source-coupled differential amplifier** (often analyzed as a **Common-Drain–Common-Gate cascade** or **differential pair with single-ended input and single-ended output**). \n\nHere is a detailed step-by-step analysis covering its DC biasing, small-signal gain, input/output impedances, and large-signal behavior.\n\n---\n\n### 1. Circuit Topology & Identification\n* **Transistors $M_1$ and $M_2$:** Form a differential pair connected at their source terminals.\n* **Tail Current Source $I_1$:** Biases the differential pair, establishing a fixed total bias current $I_1$.\n* **Inputs:** \n  * $M_1$ gate is driven by the small-signal input $V_{\\text{in}}$.\n  * $M_2$ gate is connected to a fixed DC bias voltage $V_b$.\n* **Loads:**\n  * $M_1$ drain is connected directly to $V_{DD}$ (acting as a Common-Drain stage).\n  * $M_2$ drain is connected to $V_{DD}$ through load resistor $R_D$ (acting as a Common-Gate stage).\n* **Output:** Output $V_{\\text{out}}$ is taken from the drain of $M_2$.\n\n---\n\n### 2. DC Bias Analysis (Quiescent Operating Point)\nAssuming identical matched transistors ($M_1 = M_2$) in saturation:\n\n1. **Balanced State ($V_{\\text{in}} = V_b$):**\n   * The tail current $I_1$ splits equally between the two branches:\n     $$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n   * The DC voltage at the shared source node $V_S$ is:\n     $$V_S = V_b - V_{GS2} = V_b - \\left(V_{TH} + \\sqrt{\\frac{I_1}{\\mu_n C_{ox} (W/L)}}\\right)$$\n   * The DC output voltage is:\n     $$V_{\\text{out, DC}} = V_{DD} - I_{D2} R_D = V_{DD} - \\frac{I_1}{2} R_D$$\n\n---\n\n### 3. Small-Signal Analysis & Voltage Gain\n\nAssuming both transistors are biased in saturation with transconductance $g_{m1} = g_{m2} = g_m$, and neglecting channel-length modulation ($r_o \\to \\infty$) and body effect ($g_{mb} = 0$):\n\n#### **Method 1: Nodal Analysis at Shared Source Node**\n* Small-signal voltage at the shared source node: $v_s$\n* Gate-source voltages:\n  $$v_{gs1} = v_{\\text{in}} - v_s$$\n  $$v_{gs2} = 0 - v_s = -v_s$$\n* Applying Kirchhoff's Current Law (KCL) at the source node:\n  $$i_{d1} + i_{d2} = 0 \\implies g_m(v_{\\text{in}} - v_s) + g_m(-v_s) = 0$$\n  $$g_m (v_{\\text{in}} - 2v_s) = 0 \\implies v_s = \\frac{v_{\\text{in}}}{2}$$\n\n* Small-signal drain current through $M_2$:\n  $$i_{d2} = g_m v_{gs2} = -g_m v_s = -\\frac{1}{2} g_m v_{\\text{in}}$$\n\n* Output voltage at the drain of $M_2$:\n  $$v_{\\text{out}} = -i_{d2} R_D = -\\left(-\\frac{1}{2} g_m v_{\\text{in}}\\right) R_D = +\\frac{1}{2} g_m R_D v_{\\text{in}}$$\n\n#### **Small-Signal Voltage Gain ($A_v$):**\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = +\\frac{1}{2} g_m R_D$$\n\n> **Note on Polarity:** The gain is **positive (non-inverting)**. As $V_{\\text{in}}$ increases, $M_1$ draws more current, reducing the current drawn by $M_2$. Less current through $R_D$ causes $V_{\\text{out}}$ to rise.\n\n---\n\n#### **Considering Channel-Length Modulation ($r_o$):**\nIf transistor output resistance $r_o$ is included:\n$$A_v \\approx +\\frac{1}{2} g_m \\left(R_D \\parallel r_{o2}\\right)$$\n\n---\n\n### 4. Input and Output Impedances\n\n* **Input Impedance ($R_{\\text{in}}$):** \n  Looking into the gate of MOSFET $M_1$ at low frequencies:\n  $$R_{\\text{in}} \\approx \\infty$$\n\n* **Output Impedance ($R_{\\text{out}}$):** \n  Looking back into the terminal of $V_{\\text{out}}$:\n  $$R_{\\text{out}} = R_D \\parallel r_{o2} \\approx R_D \\quad (\\text{if } r_{o2} \\gg R_D)$$\n\n---\n\n### 5. Large-Signal Operation & Output Voltage Swing\n\n1. **Maximum Output Voltage ($V_{\\text{out, max}}$):**\n   * When $V_{\\text{in}} \\gg V_b$, transistor $M_1$ steers all tail current ($I_{D1} = I_1$) and $M_2$ turns **OFF** ($I_{D2} = 0$).\n   * $$V_{\\text{out, max}} = V_{DD}$$\n\n2. **Minimum Output Voltage ($V_{\\text{out, min}}$):**\n   * When $V_{\\text{in}} \\ll V_b$, transistor $M_1$ turns **OFF** ($I_{D1} = 0$) and $M_2$ carries all the tail current ($I_{D2} = I_1$).\n   * $$V_{\\text{out, min}} = V_{DD} - I_1 R_D$$\n\n* **Total Voltage Swing Range:** \n  $$\\Delta V_{\\text{out}} = I_1 R_D$$\n\n---\n\n### Summary Table\n\n| Parameter | Formula / Value |\n| :--- | :--- |\n| **Topology** | Non-inverting Differential / Common-Drain to Common-Gate Stage |\n| **DC Output Voltage** | $V_{DD} - \\frac{I_1 R_D}{2}$ |\n| **Small-Signal Voltage Gain ($A_v$)** | $+\\frac{1}{2} g_m R_D$ |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ |\n| **Output Impedance ($R_{\\text{out}}$)** | $R_D \\parallel r_{o2}$ |\n| **Output Swing Range** | $[V_{DD} - I_1 R_D, \\, V_{DD}]$ |",
        "format": "markdown",
        "sha256": "b5316d6f9bbb03820d157778ac3a9b0026713c290bd8df15866b8a72659cc111"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, with M2 gate biased at Vb and output at its drain; it also gives the correct non-inverting small-signal gain. Minor modeling approximations in secondary details do not affect the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3689,
        "total_tokens": 4800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3689,
        "total_tokens": 4800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive step-by-step analysis of the given MOS circuit.\n\n---\n\n### 1. Circuit Description & Topology\n\n* **Circuit Type:** Differential Pair with Single-Ended Input and Single-Ended Output.\n* **Transistors:** $M_1$ and $M_2$ are matched N-channel MOSFETs (NMOS).\n* **Bias Current:** $I_1$ is a constant tail current source providing bias current to the source terminals of both transistors.\n* **Load:** Resistor $R_D$ connected to the drain of $M_2$. The drain of $M_1$ is connected directly to $V_{DD}$.\n* **Operation Mode:**\n  * **$M_1$** acts as a **Source Follower (Common Drain)**, buffering the input signal $V_{\\text{in}}$.\n  * **$M_2$** acts as a **Common-Gate Amplifier**, receiving the signal at its source terminal while its gate is held at a fixed DC bias voltage $V_b$ (AC ground).\n\n---\n\n### 2. DC (Large-Signal) Analysis\n\nAssuming $M_1$ and $M_2$ are identical and operating in the **saturation region**:\n\n1. **Balanced DC Operating Point ($V_{\\text{in, DC}} = V_b$):**\n   * The tail current divides equally between both transistors:\n     $$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n   * The DC voltage at the output node is:\n     $$V_{\\text{out, DC}} = V_{DD} - I_{D2} R_D = V_{DD} - \\frac{I_1}{2} R_D$$\n   * The shared source node DC voltage $V_S$ is:\n     $$V_S = V_b - V_{GS2} = V_b - \\left(V_{TH} + \\sqrt{\\frac{I_1}{K_n}}\\right)$$\n     *(where $K_n = \\mu_n C_{ox} \\frac{W}{L}$)*\n\n2. **Saturation Condition:**\n   To keep $M_2$ in saturation:\n   $$V_{\\text{out}} \\ge V_b - V_{TH}$$\n\n---\n\n### 3. Small-Signal AC Analysis\n\nTo calculate the small-signal voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$, assume ideal transistors initially (channel-length modulation $\\lambda = 0$, body effect $\\eta = 0$):\n\n#### Step A: Source Node Voltage ($v_s$)\n* The gate of $M_2$ is connected to a constant DC bias $V_b$, so it is an **AC ground** ($v_{g2} = 0$).\n* Applying KCL at the shared source node ($v_s$):\n  $$i_{d1} = i_{d2}$$\n* Expressing the small-signal drain currents in terms of $v_{\\text{in}}$ and $v_s$:\n  $$g_{m1} (v_{\\text{in}} - v_s) = g_{m2} (0 - v_s) \\cdot (-1) = g_{m2} v_s$$\n* Solving for $v_s$:\n  $$v_s = \\left( \\frac{g_{m1}}{g_{m1} + g_{m2}} \\right) v_{\\text{in}}$$\n\nFor matched transistors where $g_{m1} = g_{m2} = g_m$:\n$$v_s = \\frac{1}{2} v_{\\text{in}}$$\n\n#### Step B: Output Voltage ($v_{\\text{out}}$)\n* The small-signal current flowing through $R_D$ is $i_{d2}$:\n  $$i_{d2} = g_{m2} (v_{g2} - v_s) = -g_{m2} v_s$$\n* The output voltage $v_{\\text{out}}$ is given by:\n  $$v_{\\text{out}} = -i_{d2} R_D = -(-g_{m2} v_s) R_D = g_{m2} v_s R_D$$\n* Substituting $v_s = \\frac{1}{2} v_{\\text{in}}$:\n  $$v_{\\text{out}} = g_m \\left(\\frac{1}{2} v_{\\text{in}}\\right) R_D = \\frac{1}{2} g_m R_D v_{\\text{in}}$$\n\n#### Voltage Gain Result:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = +\\frac{1}{2} g_m R_D$$\n\n> **Note on Sign:** The gain is **positive (non-inverting)**. As $V_{\\text{in}}$ increases, the source node voltage $V_S$ rises, decreasing $V_{GS2}$. This reduces $I_{D2}$, causing $V_{\\text{out}}$ to rise toward $V_{DD}$.\n\n---\n\n### 4. Including Output Resistance ($r_o$)\n\nIf channel-length modulation ($\\lambda \\neq 0$) is taken into account:\n\n* **Output Resistance ($R_{\\text{out}}$):** Looking into the output node $V_{\\text{out}}$:\n  $$R_{\\text{out}} = R_D \\parallel \\left[ r_{o2} + (1 + g_{m2} r_{o2})(r_{o1} \\parallel R_{I1}) \\right]$$\n  Since $R_{I1}$ (current source resistance) is very high:\n  $$R_{\\text{out}} \\approx R_D \\parallel \\left[ r_{o2} + (1 + g_{m2} r_{o2}) r_{o1} \\right] \\approx R_D \\parallel (2 g_m r_o^2)$$\n  Because typically $R_D \\ll 2 g_m r_o^2$:\n  $$R_{\\text{out}} \\approx R_D$$\n\n* **Loaded Voltage Gain:**\n  $$A_v \\approx \\frac{1}{2} g_m (R_D \\parallel r_{o2})$$\n\n---\n\n### 5. Summary of Circuit Characteristics\n\n| Parameter | Expression / Characteristic |\n| :--- | :--- |\n| **Gain Type** | Non-inverting ($A_v > 0$) |\n| **Small-Signal Voltage Gain ($A_v$)** | $+\\frac{1}{2} g_m R_D$ |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ (MOS gate input) |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\approx R_D$ |\n| **Signal Path Topology** | Source Follower ($M_1$) + Common Gate ($M_2$) |\n\n#### **Key Advantages & Applications:**\n1. **Non-Inverting Amplification:** Provides positive gain without adding an extra stage.\n2. **High Input Impedance:** Signal drives a MOS gate directly.\n3. **Common-Mode Rejection:** Rejects low-frequency common-mode noise present on $V_{\\text{in}}$ and $V_b$.",
        "format": "markdown",
        "sha256": "d5fe746d451435be1de0c65ca960378f132fef723abff721e8803dd81041a708"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower/common-gate signal path (equivalently, the source-coupled pair with M2 biased at Vb) and gives the correct non-inverting gain. Secondary modeling details do not change the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3742,
        "total_tokens": 4853,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3742,
        "total_tokens": 4853,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **single-ended MOSFET differential amplifier stage** (also commonly viewed as a **Common-Drain (Source Follower) driving a Common-Gate amplifier**). \n\nHere is a comprehensive breakdown of its operation, DC behavior, small-signal voltage gain, and key characteristics.\n\n---\n\n### 1. Circuit Architecture Overview\n\n* **$M_1$ (Input Transistor):** Acts as a **source follower (common-drain amplifier)**. The input signal $V_{\\text{in}}$ is applied to its gate, and its drain is tied to $V_{DD}$.\n* **$M_2$ (Output Transistor):** Acts as a **common-gate amplifier**. Its gate is biased at a fixed DC voltage $V_b$, and the output $V_{\\text{out}}$ is taken from its drain.\n* **$R_D$:** The load resistor connected between $V_{DD}$ and the drain of $M_2$.\n* **$I_1$:** A constant current source biasing both transistors at their common source node.\n\n---\n\n### 2. Large-Signal (DC) Behavior\n\nDepending on the value of $V_{\\text{in}}$ relative to $V_b$:\n\n1. **$V_{\\text{in}} \\ll V_b$ ($M_1$ OFF):**\n   * Transistor $M_1$ is cut off because its gate voltage is too low relative to the common source node.\n   * All current $I_1$ flows entirely through $M_2$ ($I_{D2} = I_1$).\n   * The output voltage is at its minimum: \n     $$V_{\\text{out, min}} = V_{DD} - I_1 R_D$$\n\n2. **$V_{\\text{in}} = V_b$ (Equilibrium / Balanced State):**\n   * Assuming identical transistors ($M_1 = M_2$), the bias current divides equally between both branches:\n     $$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n   * The DC output voltage is:\n     $$V_{\\text{out, DC}} = V_{DD} - \\frac{I_1}{2} R_D$$\n\n3. **$V_{\\text{in}} \\gg V_b$ ($M_2$ OFF):**\n   * $M_1$ pulls the common source node voltage up, turning $M_2$ OFF ($I_{D2} = 0$).\n   * All current $I_1$ flows through $M_1$.\n   * No current flows through $R_D$, so the output voltage reaches its maximum:\n     $$V_{\\text{out, max}} = V_{DD}$$\n\n---\n\n### 3. Small-Signal Analysis & Voltage Gain\n\n#### Method 1: Two-Stage Signal Path (Source Follower $\\rightarrow$ Common Gate)\n\n1. **Gain of $M_1$ (Source Follower stage):**\n   Looking into the source of $M_2$, the impedance is $1/g_{m2}$. The small-signal voltage $v_s$ at the common source node is:\n   $$v_s = v_{\\text{in}} \\cdot \\frac{1/g_{m2}}{1/g_{m1} + 1/g_{m2}} = v_{\\text{in}} \\cdot \\frac{g_{m1}}{g_{m1} + g_{m2}}$$\n\n2. **Gain of $M_2$ (Common-Gate stage):**\n   The small-signal current flowing out of $M_2$'s drain into $R_D$ is $-g_{m2} v_s$. Therefore:\n   $$v_{\\text{out}} = -(-g_{m2} v_s) R_D = g_{m2} R_D v_s$$\n\n3. **Overall Voltage Gain ($A_v$):**\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} g_{m2} R_D}{g_{m1} + g_{m2}}$$\n\n   Assuming matched transistors ($g_{m1} = g_{m2} = g_m$):\n   $$\\mathbf{A_v = +\\frac{1}{2} g_m R_D}$$\n\n---\n\n#### Method 2: Including Channel-Length Modulation ($r_o$)\n\nIf channel-length modulation is taken into account (output resistance $r_{o2}$ of $M_2$ and $r_{o1}$ of $M_1$):\n$$A_v \\approx +\\frac{1}{2} g_m (R_D \\parallel r_{o2})$$\n\n---\n\n### 4. Key Properties & Summary\n\n* **Non-Inverting Stage:** The voltage gain is positive ($A_v > 0$). As $V_{\\text{in}}$ increases, $V_{\\text{out}}$ increases.\n* **High Input Impedance:** Because the input signal drives the MOSFET gate of $M_1$, the input impedance is extremely high (nearly infinite at low frequencies).\n* **High-Frequency Performance:** \n  * $M_1$ operates as a source follower, which eliminates the **Miller effect** on the input capacitance.\n  * $M_2$ operates in a common-gate configuration, which also avoids the Miller capacitance. \n  * Consequently, this topology exhibits a relatively high bandwidth.",
        "format": "markdown",
        "sha256": "e9fce3939addc30e40f78b5a0bdcf64bf8e4b3175f33bca4f07c84018b9cee77"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower/common-gate topology (also a source-coupled differential pair) and gives the correct non-inverting gain. Minor simplifications in the optional output-resistance and bandwidth discussion do not affect the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3507,
        "total_tokens": 4618,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3507,
        "total_tokens": 4618,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the given circuit (a **source follower** or **common-drain** amplifier loaded by a current source $M_2$) can become **inductive** due to the interaction between the transistor's gate-source parasitic capacitance ($C_{gs1}$) and the source resistance ($R_S$).\n\n---\n\n### 1. Intuitive Physical Explanation\n\n* **At Low Frequencies:**  \n  The gate-source capacitance $C_{gs1}$ acts as an open circuit. With $V_{\\text{in}}$ at AC ground, the gate voltage is fixed at $V_g \\approx 0$. \n  * If a voltage disturbance $\\Delta V_{\\text{out}}$ occurs at the output, the gate-to-source voltage changes by $\\Delta V_{GS1} = -\\Delta V_{\\text{out}}$. \n  * Transistor $M_1$ responds strongly by changing its current ($\\Delta I_D = g_{m1} \\Delta V_{GS1} = -g_{m1} \\Delta V_{\\text{out}}$), suppressing the voltage change. \n  * This negative feedback provides a **low output resistance** equal to $R_{\\text{out}} \\approx \\frac{1}{g_{m1}}$.\n\n* **At High Frequencies:**  \n  $C_{gs1}$ begins to conduct current. High-frequency voltage changes at $V_{\\text{out}}$ are coupled directly to the gate through the $C_{gs1}\\text{--}R_S$ high-pass filter network.\n  * As $V_{\\text{out}}$ rises rapidly, the gate voltage $V_g$ is pulled up with it ($V_g$ tracks $V_{\\text{out}}$).\n  * Consequently, the variation in gate-to-source voltage $\\Delta V_{GS1} = V_g - V_{\\text{out}}$ is reduced ($\\Delta V_{GS1} \\to 0$).\n  * Since $V_{GS1}$ changes much less, $M_1$ supplies less restoring current to resist output voltage changes.\n  * The circuit exhibits a **higher output impedance at higher frequencies**.\n\nBecause the output impedance **increases with frequency** (i.e., current lags behind voltage), the output node behaves like an **inductor**.\n\n---\n\n### 2. Small-Signal Mathematical Proof\n\nTo calculate the output impedance $Z_{\\text{out}}(s)$, we set the input signal $V_{\\text{in}} = 0$ (AC ground), apply a test voltage $v_x$ at the output node, and find the test current $i_x$.\n\n1. **Gate Voltage ($v_g$):**  \n   The gate node forms a voltage divider between $R_S$ and $C_{gs1}$:\n   $$v_g = v_x \\cdot \\frac{R_S}{R_S + \\frac{1}{sC_{gs1}}} = v_x \\cdot \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}}$$\n\n2. **Gate-to-Source Voltage ($v_{gs1}$):**\n   $$v_{gs1} = v_g - v_x = v_x \\left( \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}} - 1 \\right) = \\frac{-v_x}{1 + s R_S C_{gs1}}$$\n\n3. **Output Test Current ($i_x$):**  \n   Assuming $M_2$ acts as an ideal current source (infinite output resistance $r_{o2} \\approx \\infty$) and neglecting $r_{o1}$ for simplicity:\n   $$i_x = -g_{m1} v_{gs1} + s C_{gs1}(v_x - v_g)$$\n   $$i_x = g_{m1} \\frac{v_x}{1 + s R_S C_{gs1}} + s C_{gs1} \\frac{v_x}{1 + s R_S C_{gs1}} = v_x \\cdot \\frac{g_{m1} + s C_{gs1}}{1 + s R_S C_{gs1}}$$\n\n4. **Output Impedance ($Z_{\\text{out}}$):**\n   $$Z_{\\text{out}}(s) = \\frac{v_x}{i_x} = \\frac{1 + s R_S C_{gs1}}{g_{m1} + s C_{gs1}}$$\n\n---\n\n### 3. Verification of Inductive Behavior\n\nSubstituting $s = j\\omega$ to evaluate the frequency response:\n\n$$Z_{\\text{out}}(j\\omega) = \\frac{1 + j\\omega R_S C_{gs1}}{g_{m1} + j\\omega C_{gs1}} = \\frac{g_{m1} + \\omega^2 R_S C_{gs1}^2}{g_{m1}^2 + \\omega^2 C_{gs1}^2} + j\\omega \\cdot \\frac{C_{gs1}(g_{m1}R_S - 1)}{g_{m1}^2 + \\omega^2 C_{gs1}^2}$$\n\n* **Condition for Inductance:**  \n  The imaginary part $\\text{Im}\\{Z_{\\text{out}}\\}$ is **positive** whenever:\n  $$g_{m1} R_S > 1 \\implies R_S > \\frac{1}{g_{m1}}$$\n\nAt moderate frequencies ($\\omega \\ll \\frac{g_{m1}}{C_{gs1}}$), $Z_{\\text{out}}(s)$ can be simplified using Taylor expansion:\n$$Z_{\\text{out}}(s) \\approx \\frac{1}{g_{m1}} + s \\left( \\frac{R_S C_{gs1}}{g_{m1}} \\right)$$\n\nThis is equivalent to a **resistor in series with an inductor**:\n* **Equivalent Resistance:** $R_{\\text{eq}} \\approx \\frac{1}{g_{m1}}$\n* **Equivalent Inductance:** $L_{\\text{eq}} \\approx \\frac{R_S C_{gs1}}{g_{m1}}$\n\n---\n\n### Summary\nThe output impedance is inductive because **$C_{gs1}$ weakens the source-follower feedback at high frequencies** when a source resistance $R_S$ is present. If $R_S > 1/g_{m1}$, the output reactance is positive, synthesizing an active inductance $L_{\\text{eq}} \\approx \\frac{R_S C_{gs1}}{g_{m1}}$. \n\n*(Note: This inductive output impedance can cause severe ringing or instability if the source follower drives a capacitive load.)*",
        "format": "markdown",
        "sha256": "7c74ba8c6dfebf10d3e04ee4335bc63d5037b68a221384c4c55ea41586e8204d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower topology, derives the stated output-impedance expression, and explains the transition from about 1/gm1 to RS, giving inductive behavior when RS > 1/gm1. The equivalent-inductance approximation omits a term, but the essential mechanism and conclusion are correct.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 4929,
        "total_tokens": 6012,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3449,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 4929,
        "total_tokens": 6012,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3449,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the source follower (common-drain stage) shown in the figure can become **inductive** at mid-to-high frequencies due to the interaction between the **source resistance ($R_S$)** and the **gate-source capacitance ($C_{gs1}$)** of transistor $M_1$.\n\n---\n\n### 1. Mathematical Derivation\n\nTo find the output impedance $Z_{\\text{out}}$, we perform a small-signal analysis looking into the output node $V_{\\text{out}}$ (the source of $M_1$), setting the AC input $V_{\\text{in}} = 0$ (grounded).\n\n1. **Gate Voltage ($v_g$):**\n   When a test voltage $v_{\\text{out}}$ is applied at the output node, current flows from the output to the gate through the gate-source capacitance $C_{gs1}$, and then through $R_S$ to AC ground:\n   $$v_g = v_{\\text{out}} \\cdot \\frac{R_S}{R_S + \\frac{1}{s C_{gs1}}} = v_{\\text{out}} \\left( \\frac{s C_{gs1} R_S}{1 + s C_{gs1} R_S} \\right)$$\n\n2. **Gate-to-Source Voltage ($v_{gs1}$):**\n   $$v_{gs1} = v_g - v_{\\text{out}} = v_{\\text{out}} \\left( \\frac{s C_{gs1} R_S}{1 + s C_{gs1} R_S} - 1 \\right) = -v_{\\text{out}} \\left( \\frac{1}{1 + s C_{gs1} R_S} \\right)$$\n\n3. **Output Current ($i_{\\text{out}}$):**\n   The total small-signal current drawn from the output node is the sum of the transistor's controlled drain current and the current flowing through $C_{gs1}$:\n   $$i_{\\text{out}} = -g_{m1} v_{gs1} + (v_{\\text{out}} - v_g) s C_{gs1}$$\n   $$i_{\\text{out}} = v_{\\text{out}} \\left( \\frac{g_{m1} + s C_{gs1}}{1 + s C_{gs1} R_S} \\right)$$\n\n4. **Output Impedance ($Z_{\\text{out}}$):**\n   $$Z_{\\text{out}}(s) = \\frac{v_{\\text{out}}}{i_{\\text{out}}} = \\frac{1 + s C_{gs1} R_S}{g_{m1} + s C_{gs1}}$$\n\n---\n\n### 2. Equivalent Circuit (Inductive Behavior)\n\nAt frequencies below the transition frequency ($s C_{gs1} \\ll g_{m1}$), the output impedance simplifies to:\n\n$$Z_{\\text{out}}(s) \\approx \\frac{1 + s C_{gs1} R_S}{g_{m1}} = \\frac{1}{g_{m1}} + s \\left( \\frac{C_{gs1} R_S}{g_{m1}} \\right)$$\n\nThis expression represents a **resistor** in series with an **equivalent inductor**:\n* **Series Resistance:** $R_{\\text{eq}} = \\frac{1}{g_{m1}}$\n* **Equivalent Inductance:** $L_{\\text{eq}} = \\frac{C_{gs1} R_S}{g_{m1}}$\n\n---\n\n### 3. Physical / Intuitive Explanation\n\n* **At Low Frequencies (DC):** \n  $C_{gs1}$ behaves as an open circuit. The gate is held firmly at AC ground ($v_g = 0$), so a change in output voltage $\\Delta v_{\\text{out}}$ immediately results in a full change in gate-source voltage $\\Delta v_{gs1} = -\\Delta v_{\\text{out}}$. Transistor $M_1$ responds instantly, giving a low resistive output impedance of $1/g_{m1}$.\n\n* **At Higher Frequencies:** \n  $C_{gs1}$ acts as a low-impedance path. When $V_{\\text{out}}$ rises, AC current flows through $C_{gs1}$ into $R_S$, causing the gate voltage $V_g$ to **follow** $V_{\\text{out}}$ instead of staying grounded. \n  \n  Because the gate voltage rises along with the output, the change in $v_{gs1} = v_g - v_{\\text{out}}$ is reduced/delayed. This **delays the transistor's current response** relative to the applied voltage. \n\n  Since a lagging current in response to a voltage change is the defining characteristic of an inductor ($V$ leads $I$), the circuit exhibits **inductive output impedance**.",
        "format": "markdown",
        "sha256": "abfba1e135f6e0b92a70f94430e9eb1aa0cc7c08fb2624004e603d622c7e1f53"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the source follower, derives the exact output-impedance expression, and describes the gate-following mechanism. But its low-frequency expansion drops the denominator’s first-order term, giving an incorrect equivalent inductance and missing the condition R_S > 1/g_m for inductive behavior.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 3428,
        "total_tokens": 4511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2362,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 3428,
        "total_tokens": 4511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2362,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **source follower (common drain stage)** biased by a current source transistor $M_2$. Its output impedance can exhibit an **inductive characteristic** due to the interaction between the source resistance $R_S$ and the internal gate-source capacitance $C_{gs}$ of transistor $M_1$.\n\n---\n\n### 1. Intuitive Physical Explanation\n\n* **At Low Frequencies:**  \n  The impedance of $C_{gs}$ is extremely high, so no AC current flows into the gate. The gate is firmly connected to AC ground via $R_S$. \n  If the output voltage $v_{\\text{out}}$ increases, the gate-to-source voltage drops immediately ($\\Delta v_{gs} = -\\Delta v_{\\text{out}}$). Transistor $M_1$ reacts strongly through its transconductance $g_m$, pulling current to suppress the voltage rise. This strong negative feedback gives a low output resistance:\n  $$R_{\\text{out}} \\approx \\frac{1}{g_m}$$\n\n* **At High Frequencies:**  \n  The capacitance $C_{gs}$ acts like a short circuit relative to $R_S$. $R_S$ and $C_{gs}$ form a low-pass filter for signals feeding back to the gate. As a result, the gate voltage $v_g$ begins to **follow** the output voltage $v_{\\text{out}}$:\n  $$\\Delta v_g \\approx \\Delta v_{\\text{out}} \\implies \\Delta v_{gs} \\to 0$$\n  Since $v_{gs}$ barely changes, $M_1$ loses its transconductance regulation ($g_m$ feedback action), and the output impedance increases toward $R_S$.\n\n* **Inductive Behavior (Phase Lag):**  \n  An inductive component is defined by an impedance that **increases with frequency** and causes the current response to **lag behind the voltage**. Because of the $R_S C_{gs}$ delay, as frequency increases, $Z_{\\text{out}}$ rises from $1/g_m$ to $R_S$, creating an equivalent inductive response.\n\n---\n\n### 2. Mathematical Derivation\n\nTo calculate the small-signal output impedance $Z_{\\text{out}}(s)$, set $V_{\\text{in}} = 0$ (AC ground) and apply a test voltage source $v_t$ at the output node $V_{\\text{out}}$:\n\n1. **Gate Voltage ($v_g$):**\n   By voltage division between $R_S$ and $C_{gs}$:\n   $$v_g = v_t \\left( \\frac{s C_{gs} R_S}{1 + s C_{gs} R_S} \\right)$$\n\n2. **Gate-Source Voltage ($v_{gs}$):**\n   $$v_{gs} = v_g - v_t = -v_t \\left( \\frac{1}{1 + s C_{gs} R_S} \\right)$$\n\n3. **Output Test Current ($i_t$):**\n   Ignoring channel length modulation ($r_o$) for simplicity, the current drawn from the test source is:\n   $$i_t = -g_m v_{gs} + (v_t - v_g) s C_{gs} = (g_m + s C_{gs})(v_t - v_g)$$\n   $$i_t = v_t \\left( \\frac{g_m + s C_{gs}}{1 + s C_{gs} R_S} \\right)$$\n\n4. **Output Impedance ($Z_{\\text{out}}(s)$):**\n   $$Z_{\\text{out}}(s) = \\frac{v_t}{i_t} = \\frac{1 + s C_{gs} R_S}{g_m + s C_{gs}} = \\frac{1}{g_m} \\cdot \\frac{1 + s C_{gs} R_S}{1 + s \\frac{C_{gs}}{g_m}}$$\n\n---\n\n### 3. Conditions for Inductive Impedance\n\n* **At DC ($s = 0$):**\n  $$Z_{\\text{out}}(0) = \\frac{1}{g_m}$$\n\n* **At High Frequencies ($s \\to \\infty$):**\n  $$Z_{\\text{out}}(\\infty) = R_S$$\n\nIf **$R_S > \\frac{1}{g_m}$**, the output impedance increases from $\\frac{1}{g_m}$ to $R_S$ as frequency increases.\n\n#### Equivalent Circuit Model:\nThis impedance can be synthesized as a low-frequency resistor $R_1$ in series with a parallel $R_2\\text{-}L$ network:\n\n$$Z_{\\text{out}}(s) = R_1 + \\left( R_2 \\parallel sL \\right)$$\n\nWhere:\n* $R_1 = \\frac{1}{g_m}$\n* $R_2 = R_S - \\frac{1}{g_m}$\n* **Equivalent Inductance:** \n  $$L = \\frac{C_{gs}}{g_m} \\left( R_S - \\frac{1}{g_m} \\right)$$\n\n### Summary\nThe output impedance is **inductive** whenever $R_S > \\frac{1}{g_m}$ because $C_{gs}$ feeds the output signal back to the gate with a phase delay, diminishing the transistor's $g_m$ action at higher frequencies and causing $Z_{\\text{out}}$ to increase with frequency.",
        "format": "markdown",
        "sha256": "673054117509dcb5400f44026ce5dacdf9db3cc172bd65877abbfddcf06f1afc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower mechanism and derives the transition from about 1/gm to RS as Cgs shorts gate to source, with inductive behavior when RS > 1/gm. This satisfies the full-credit rule; the minor filter terminology imprecision does not change the conclusion.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 4138,
        "total_tokens": 5221,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2911,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 4138,
        "total_tokens": 5221,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2911,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed analysis of the given circuit, covering its **DC operating point (large-signal analysis)**, **small-signal behavior**, and **feedback/stability properties**.\n\n---\n\n### **1. Circuit Description & Overview**\n\n* **$M_1$**: Main common-source (CS) NMOS amplifier with drain resistor load $R_{\\text{D1}}$.\n* **$M_2$**: Feedback NMOS transistor whose gate senses the output voltage $V_{\\text{out}}$ and whose drain pulls current from node $X$.\n* **$I_{\\text{in}}$**: Input current source connected to node $X$.\n* **$V_{\\text{out}}$**: Output node at the drain of $M_1$.\n\n---\n\n### **2. DC (Large-Signal) Analysis**\n\nAssuming both transistors $M_1$ and $M_2$ are operating in the **saturation region**:\n\n#### **A. Transistor $M_2$**\nSince no DC current flows into the gate of $M_1$, all of the input current $I_{\\text{in}}$ flows through $M_2$:\n$$I_{\\text{D2}} = I_{\\text{in}} = \\frac{1}{2} \\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_2 (V_{\\text{out}} - V_{\\text{TH2}})^2$$\n\nSolving for $V_{\\text{out}}$:\n$$V_{\\text{out}} = V_{\\text{TH2}} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{\\text{ox}} (W/L)_2}}$$\n\n> **Key Observation:** As the input current $I_{\\text{in}}$ increases, $V_{\\text{out}}$ must increase to allow $M_2$ to conduct $I_{\\text{in}}$.\n\n---\n\n#### **B. Transistor $M_1$**\nThe current through $R_{\\text{D1}}$ is the drain current of $M_1$:\n$$I_{\\text{D1}} = \\frac{V_{\\text{DD}} - V_{\\text{out}}}{R_{\\text{D1}}}$$\n\nSince $M_1$ is in saturation:\n$$I_{\\text{D1}} = \\frac{1}{2} \\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_1 (V_X - V_{\\text{TH1}})^2$$\n\nEquating the two gives the voltage at node $X$:\n$$V_X = V_{\\text{TH1}} + \\sqrt{\\frac{2 (V_{\\text{DD}} - V_{\\text{out}})}{\\mu_n C_{\\text{ox}} (W/L)_1 R_{\\text{D1}}}}$$\n\n---\n\n### **3. Small-Signal Analysis**\n\nLet:\n* $g_{m1}, g_{m2}$ be the transconductances of $M_1$ and $M_2$.\n* $r_{o1}, r_{o2}$ be the output resistances of $M_1$ and $M_2$.\n* $R_L = R_{\\text{D1}} \\parallel r_{o1}$ be the total resistance at the output node $V_{\\text{out}}$.\n\n#### **A. Transresistance Gain ($v_{\\text{out}} / i_{\\text{in}}$)**\nWriting KCL at node $X$:\n$$i_{\\text{in}} = g_{m2} v_{\\text{out}} + \\frac{v_x}{r_{o2}}$$\n\nWriting the relationship between $v_x$ and $v_{\\text{out}}$ from the $M_1$ amplifier stage:\n$$v_{\\text{out}} = -g_{m1} R_L v_x \\implies v_x = -\\frac{v_{\\text{out}}}{g_{m1} R_L}$$\n\nSubstituting $v_x$ into the KCL equation:\n$$i_{\\text{in}} = g_{m2} v_{\\text{out}} - \\frac{v_{\\text{out}}}{g_{m1} R_L r_{o2}} = v_{\\text{out}} \\left( g_{m2} - \\frac{1}{g_{m1} R_L r_{o2}} \\right)$$\n\nTherefore, the closed-loop transresistance is:\n$$\\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{g_{m1} R_L r_{o2}}{g_{m1} g_{m2} R_L r_{o2} - 1}$$\n\nIf the loop gain $g_{m1} g_{m2} R_L r_{o2} \\gg 1$:\n$$\\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx \\frac{1}{g_{m2}}$$\n\n---\n\n#### **B. Input Resistance ($R_{\\text{in}}$ at Node $X$)**\n$$R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = \\frac{-\\frac{v_{\\text{out}}}{g_{m1} R_L}}{v_{\\text{out}} \\left( g_{m2} - \\frac{1}{g_{m1} R_L r_{o2}} \\right)} = \\frac{r_{o2}}{1 - g_{m1} g_{m2} R_L r_{o2}}$$\n\nSince $g_{m1} g_{m2} R_L r_{o2} > 1$, the input resistance is **negative**:\n$$R_{\\text{in}} < 0$$\n\n---\n\n#### **C. Output Resistance ($R_{\\text{out}}$ at $V_{\\text{out}}$)**\nBy deactivating the input ($i_{\\text{in}} = 0$) and applying a test voltage $v_t$ at $V_{\\text{out}}$:\n$$v_x = -g_{m2} r_{o2} v_t$$\n\nThe total test current $i_t$ drawn from the output node is:\n$$i_t = \\frac{v_t}{R_L} + g_{m1} v_x = v_t \\left( \\frac{1}{R_L} - g_{m1} g_{m2} r_{o2} \\right)$$\n\n$$R_{\\text{out}} = \\frac{v_t}{i_t} = \\frac{R_L}{1 - g_{m1} g_{m2} R_L r_{o2}}$$\n\n---\n\n### **4. Feedback Topology & Stability**\n\n1. **Feedback Type**: **Shunt-Shunt (Voltage-Current)** feedback.\n   * **Sensed signal**: Output voltage $V_{\\text{out}}$\n   * **Fed-back signal**: Current $I_{D2}$ pulled from node $X$\n\n2. **Loop Gain ($T$)**:\n   Breaking the loop at node $X$ and applying a test voltage $v_{\\text{test}}$:\n   * Output of $M_1$: $v_{\\text{out}} = -g_{m1} R_L v_{\\text{test}}$\n   * Current drawn by $M_2$: $i_{d2} = g_{m2} v_{\\text{out}} = -g_{m1} g_{m2} R_L v_{\\text{test}}$\n   * Voltage returned at node $X$: $v_{\\text{returned}} = -i_{d2} r_{o2} = + g_{m1} g_{m2} R_L r_{o2} v_{\\text{test}}$\n\n   $$T = \\frac{v_{\\text{returned}}}{v_{\\text{test}}} = + g_{m1} g_{m2} (R_{\\text{D1}} \\parallel r_{o1}) r_{o2}$$\n\n3. **Polarity & Stability**:\n   * The overall loop gain $T$ is **positive** ($T > 0$).\n   * Because the feedback is **positive**, the pole at node $X$ moves into the **Right Half-Plane (RHP)**:\n     $$s_{p} = \\frac{1 - T}{C_X r_{o2}} > 0$$\n   * **Practical Implication**: Driven by an ideal current source, the circuit is dynamically unstable and acts like a **latch / bistable circuit** or a **negative resistance converter**. For stable small-signal amplifier operation, an appropriate finite source resistance or frequency compensation is required.\n\n---\n\n### **Summary of Results**\n\n| Parameter | Expression |\n| :--- | :--- |\n| **Output DC Voltage ($V_{\\text{out}}$)** | $V_{\\text{TH2}} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{\\text{ox}} (W/L)_2}}$ |\n| **Node $X$ DC Voltage ($V_X$)** | $V_{\\text{TH1}} + \\sqrt{\\frac{2 (V_{\\text{DD}} - V_{\\text{out}})}{\\mu_n C_{\\text{ox}} (W/L)_1 R_{\\text{D1}}}}$ |\n| **Transresistance ($V_{\\text{out}}/I_{\\text{in}}$)** | $\\approx +\\frac{1}{g_{m2}}$ |\n| **Loop Gain ($T$)** | $+ g_{m1} g_{m2} (R_{\\text{D1}} \\parallel r_{o1}) r_{o2}$ (Positive Feedback) |\n| **Input Resistance ($R_{\\text{in}}$)** | Negative ($\\frac{r_{o2}}{1 - T}$) |",
        "format": "markdown",
        "sha256": "b68c2a50f551a18b12a821085af48bcd5f1162a49641f0af2e4f1523fe3e66ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection to Vout, the positive-feedback loop, and consequences including negative input resistance and latching. The pole-expression sign error is incidental to the required answer.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 8431,
        "total_tokens": 9550,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6282,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 8431,
        "total_tokens": 9550,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6282,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed step-by-step analysis of the given MOSFET circuit.\n\n---\n\n### 1. Circuit Overview & Component Identification\n\n* **$M_1$**: Main common-source (CS) NMOS amplifier stage with load resistor $R_{\\text{D1}}$.\n  * **Gate**: Connected to node $X$.\n  * **Drain**: Connected to the output node $V_{\\text{out}}$.\n  * **Source**: Connected to ground ($0\\text{ V}$).\n* **$M_2$**: Feedback NMOS transistor.\n  * **Gate**: Connected to the output node $V_{\\text{out}}$.\n  * **Drain**: Connected to node $X$.\n  * **Source**: Connected to ground ($0\\text{ V}$).\n* **$I_{\\text{in}}$**: Input current source injecting current into node $X$.\n* **$R_{\\text{D1}}$**: Drain pull-up resistor connected to supply voltage $V_{\\text{DD}}$.\n\n---\n\n### 2. Large-Signal / DC Analysis\n\nAssuming both transistors are in the saturation region:\n\n1. **At Node $X$**:\n   Since the gate of $M_1$ draws zero DC current:\n   $$I_{\\text{D2}} = I_{\\text{in}}$$\n   Using the saturation current equation for $M_2$ (ignoring channel-length modulation $\\lambda$):\n   $$I_{\\text{in}} = \\frac{1}{2} \\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_2 (V_{\\text{out}} - V_{\\text{TH2}})^2$$\n\n   Solving for the output voltage $V_{\\text{out}}$:\n   $$V_{\\text{out}} = V_{\\text{TH2}} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{\\text{ox}} (W/L)_2}}$$\n\n2. **At Node $V_{\\text{out}}$**:\n   The current through resistor $R_{\\text{D1}}$ must equal the drain current $I_{\\text{D1}}$ of transistor $M_1$:\n   $$I_{\\text{D1}} = \\frac{V_{\\text{DD}} - V_{\\text{out}}}{R_{\\text{D1}}}$$\n\n3. **Node $X$ Voltage ($V_X$)**:\n   Since $I_{\\text{D1}}$ is set by $V_{\\text{out}}$, the node voltage $V_X = V_{\\text{GS1}}$ must adjust so that $M_1$ conducts $I_{\\text{D1}}$:\n   $$V_X = V_{\\text{TH1}} + \\sqrt{\\frac{2 I_{\\text{D1}}}{\\mu_n C_{\\text{ox}} (W/L)_1}}$$\n\n---\n\n### 3. Loop Feedback & Stability Analysis\n\nLet's trace a small perturbation at node $X$ ($\\Delta V_X > 0$):\n\n1. **$V_X \\to V_{\\text{out}}$**: \n   $M_1$ acts as an inverting amplifier. As $V_X$ rises, $I_{\\text{D1}}$ increases, pulling $V_{\\text{out}}$ down ($\\Delta V_{\\text{out}} < 0$).\n2. **$V_{\\text{out}} \\to I_{\\text{D2}}$**: \n   $V_{\\text{out}}$ drives the gate of $M_2$. As $V_{\\text{out}}$ falls, $V_{\\text{GS2}}$ decreases, causing $I_{\\text{D2}}$ to decrease ($\\Delta I_{\\text{D2}} < 0$).\n3. **$I_{\\text{D2}} \\to V_X$**: \n   Since $I_{\\text{D2}}$ pulls current *away* from node $X$, a decrease in $I_{\\text{D2}}$ leaves more net current at node $X$, causing $V_X$ to increase **even further**.\n\n#### Dynamic Equation at Node $X$:\nIncluding node capacitance $C_X$:\n$$C_X \\frac{d V_X}{dt} = I_{\\text{in}} - I_{\\text{D2}}$$\n\nDifferentiating with respect to $V_X$:\n$$\\frac{d}{dV_X}\\left(\\frac{d V_X}{dt}\\right) = \\frac{g_{m1} g_{m2} R_L}{C_X} > 0$$\nwhere $R_L = R_{\\text{D1}} \\parallel r_{o1} \\parallel r_{o2}$.\n\n* **Conclusion**: The feedback is **positive** (regenerative). The system has a pole in the **Right-Half Plane (RHP)** at:\n  $$s = +\\frac{g_{m1} g_{m2} R_L}{C_X}$$\n  Without external loading or stabilization, the circuit is inherently **unstable** in open-loop linear operation.\n\n---\n\n### 4. Small-Signal Parameters\n\nAssuming the circuit is biased at a quasi-static equilibrium point:\n\n#### A. Transresistance Gain ($R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)\nFrom the small-signal equivalent:\n1. $v_{\\text{out}} = -g_{m1} (R_{\\text{D1}} \\parallel r_{o1}) v_X$\n2. $i_{\\text{in}} = g_{m2} v_{\\text{out}} + \\frac{v_X}{r_{o2}}$\n\nSubstituting $v_X = -\\frac{v_{\\text{out}}}{g_{m1} R_L'}$ into the current equation:\n$$i_{\\text{in}} = v_{\\text{out}} \\left( g_{m2} - \\frac{1}{g_{m1} R_L' r_{o2}} \\right)$$\n\nHence, the small-signal transresistance is:\n$$R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx \\frac{1}{g_{m2}}$$\n\n#### B. Input Resistance ($R_{\\text{in}}$)\nLooking into node $X$:\n$$R_{\\text{in}} = \\frac{v_X}{i_{\\text{in}}} \\approx -\\frac{1}{g_{m1} g_{m2} (R_{\\text{D1}} \\parallel r_{o1})}$$\n\nThe **negative input resistance** is the hallmark of the positive feedback loop.\n\n---\n\n### 5. Summary & Practical Applications\n\n| Characteristic | Result / Formula |\n| :--- | :--- |\n| **Feedback Type** | **Positive Feedback** (Regenerative) |\n| **Output Voltage ($V_{\\text{out}}$)** | $V_{\\text{TH2}} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{\\text{ox}} (W/L)_2}}$ |\n| **Transresistance ($v_{\\text{out}}/i_{\\text{in}}$)** | $\\approx \\frac{1}{g_{m2}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\approx -\\frac{1}{g_{m1} g_{m2} R_{\\text{D1}}}$ (Negative Resistance) |\n\n#### Common Applications:\n1. **Negative Resistance Cell**: Used to cancel parasitic loss in LC tanks to build high-frequency CMOS oscillators.\n2. **Bistable Latch / Schmitt Trigger**: Used in digital memory cells (SRAM) or regenerative sense amplifiers.\n3. **Active Current-to-Voltage Converter**: Provides a square-root transimpedance characteristic when properly stabilized.",
        "format": "markdown",
        "sha256": "db3a9ff7ebdc74d913d4ba3ec32de467db1f2bd8aaf2870af2badae9acc982a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as connected to Vout (not diode-connected), traces the positive-feedback loop, and states the resulting negative input resistance and instability. These meet the golden solution’s full-credit rule; imprecisions in secondary formulas do not change the central analysis.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 9196,
        "total_tokens": 10315,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7499,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 9196,
        "total_tokens": 10315,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7499,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed, step-by-step analysis of the circuit shown in the figure.\n\n---\n\n### **1. Circuit Overview and Topology**\n\n* **Components:**\n  * **$M_1$ and $M_2$:** N-channel MOSFETs (NMOS) with their sources connected to ground.\n  * **$R_{\\text{D1}}$:** Drain load resistor for transistor $M_1$, connected to supply voltage $V_{\\text{DD}}$.\n  * **$I_{\\text{in}}$:** Input current source connected to node $X$.\n* **Node Connections:**\n  * **Node $X$:** Connected to the gate of $M_1$, the drain of $M_2$, and the input current source $I_{\\text{in}}$.\n  * **Node $V_{\\text{out}}$:** Connected to the drain of $M_1$, the gate of $M_2$, and the load resistor $R_{\\text{D1}}$.\n* **Circuit Function:**\n  * The circuit acts as a **transimpedance stage** (converting input current $I_{\\text{in}}$ to output voltage $V_{\\text{out}}$) with a positive feedback loop formed by $M_1$ and $M_2$.\n\n---\n\n### **2. DC / Large-Signal Analysis**\n\nAssuming both transistors operate in the **saturation region**:\n\n1. **At Node $X$:**\n   Since ideal MOSFET gates draw zero DC current ($I_{\\text{G1}} = 0$), all of the input current $I_{\\text{in}}$ flows through the drain of $M_2$:\n   $$I_{\\text{D2}} = I_{\\text{in}}$$\n\n   Neglecting channel-length modulation ($\\lambda = 0$):\n   $$I_{\\text{in}} = \\frac{1}{2} \\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_2 (V_{\\text{GS2}} - V_{\\text{TH2}})^2$$\n\n   Since $V_{\\text{GS2}} = V_{\\text{out}}$, we can express the DC output voltage directly in terms of $I_{\\text{in}}$:\n   $$V_{\\text{out}} = V_{\\text{TH2}} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{\\text{ox}} (W/L)_2}}$$\n\n2. **At Node $V_{\\text{out}}$:**\n   The current flowing through $R_{\\text{D1}}$ equals the drain current of $M_1$:\n   $$I_{\\text{D1}} = \\frac{V_{\\text{DD}} - V_{\\text{out}}}{R_{\\text{D1}}}$$\n\n   Equating this to the saturation current equation for $M_1$ ($V_{\\text{GS1}} = V_X$):\n   $$\\frac{V_{\\text{DD}} - V_{\\text{out}}}{R_{\\text{D1}}} = \\frac{1}{2} \\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_1 (V_X - V_{\\text{TH1}})^2$$\n\n   Solving for the node voltage $V_X$:\n   $$V_X = V_{\\text{TH1}} + \\sqrt{\\frac{2 (V_{\\text{DD}} - V_{\\text{out}})}{\\mu_n C_{\\text{ox}} (W/L)_1 R_{\\text{D1}}}}$$\n\n---\n\n### **3. Small-Signal Analysis**\n\nLet:\n* $g_{m1}, g_{m2}$ be the transconductances of $M_1$ and $M_2$.\n* $r_{o1}, r_{o2}$ be the output resistances of $M_1$ and $M_2$.\n* $R_L = R_{\\text{D1}} \\parallel r_{o1}$ be the total equivalent load resistance at node $V_{\\text{out}}$.\n\n#### **A. Node Equations (KCL)**\n\n1. **At Output Node ($V_{\\text{out}}$):**\n   $$v_{\\text{out}} = -g_{m1} v_x \\cdot (R_{\\text{D1}} \\parallel r_{o1}) = -g_{m1} R_L v_x$$\n\n2. **At Node $X$:**\n   $$i_{\\text{in}} = g_{m2} v_{\\text{out}} + \\frac{v_x}{r_{o2}}$$\n\n#### **B. Transimpedance Gain ($Z_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)**\n\nSubstitute $v_x = -\\frac{v_{\\text{out}}}{g_{m1} R_L}$ into the KCL equation at Node $X$:\n\n$$i_{\\text{in}} = g_{m2} v_{\\text{out}} + \\frac{1}{r_{o2}} \\left(-\\frac{v_{\\text{out}}}{g_{m1} R_L}\\right) = v_{\\text{out}} \\left( g_{m2} - \\frac{1}{g_{m1} R_L r_{o2}} \\right)$$\n\nSolving for $Z_m$:\n\n$$Z_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{g_{m1} R_L r_{o2}}{g_{m1} g_{m2} R_L r_{o2} - 1}$$\n\n> **Ideal Case ($r_{o2} \\to \\infty$):**\n> $$Z_m \\approx \\frac{1}{g_{m2}}$$\n> \n> *Intuition:* Because gate $M_1$ draws no current and $r_{o2}$ is infinite, the input small-signal current $i_{\\text{in}}$ must equal $g_{m2} v_{\\text{out}}$, giving $v_{\\text{out}} = \\frac{i_{\\text{in}}}{g_{m2}}$.\n\n---\n\n#### **C. Input Resistance ($R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}}$)**\n\nSubstitute $v_{\\text{out}} = -g_{m1} R_L v_x$ into the KCL equation at Node $X$:\n\n$$i_{\\text{in}} = g_{m2} (-g_{m1} R_L v_x) + \\frac{v_x}{r_{o2}} = v_x \\left( \\frac{1 - g_{m1} g_{m2} R_L r_{o2}}{r_{o2}} \\right)$$\n\n$$R_{\\text{in}} = \\frac{r_{o2}}{1 - g_{m1} g_{m2} R_L r_{o2}}$$\n\n---\n\n### **4. Feedback and Stability Analysis**\n\n* **Loop Nature:** \n  * Increasing $V_X \\implies V_{\\text{out}}$ decreases (inverting action of $M_1$).\n  * Decreasing $V_{\\text{out}} \\implies M_2$ draws *less* current from Node $X \\implies V_X$ increases further.\n  * Therefore, the loop formed by $M_1$ and $M_2$ exhibits **positive feedback**.\n\n* **Loop Gain ($T$):**\n  Break the loop at Node $X$ and apply a test voltage $v_t$:\n  $$T = g_{m1} g_{m2} (R_{\\text{D1}} \\parallel r_{o1}) r_{o2}$$\n\n* **Stability Condition:**\n  For the circuit to maintain a stable bias point without latching up or oscillating:\n  $$T < 1 \\implies g_{m1} g_{m2} (R_{\\text{D1}} \\parallel r_{o1}) r_{o2} < 1$$\n\n---\n\n### **5. Summary of Results**\n\n| Parameter | Expression (Finite $r_{o}$) | Ideal Limit ($r_{o} \\to \\infty$) |\n| :--- | :--- | :--- |\n| **DC Output Voltage ($V_{\\text{out}}$)** | $V_{\\text{TH2}} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{\\text{ox}} (W/L)_2}}$ | $V_{\\text{TH2}} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{\\text{ox}} (W/L)_2}}$ |\n| **Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_x}$)** | $-g_{m1} (R_{\\text{D1}} \\parallel r_{o1})$ | $-g_{m1} R_{\\text{D1}}$ |\n| **Transimpedance Gain ($Z_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)** | $\\frac{g_{m1} R_L r_{o2}}{g_{m1} g_{m2} R_L r_{o2} - 1}$ | $\\frac{1}{g_{m2}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\frac{r_{o2}}{1 - g_{m1} g_{m2} R_L r_{o2}}$ | Negative resistance / Infinite |",
        "format": "markdown",
        "sha256": "5f018fd768ea44d85195f7bf6723e79873f1fd347d32475e5a12bd15b343f570"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2’s gate is tied to Vout, giving a positive-feedback loop, and derives the loop-gain-modified input resistance and stability condition. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 8035,
        "total_tokens": 9154,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5954,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 8035,
        "total_tokens": 9154,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5954,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **two-stage Transimpedance Amplifier (TIA)** employing **shunt-shunt negative feedback**. It is commonly used in high-speed communication systems (such as optical receivers) to convert an input signal current ($I_{\\text{in}}$) into an output voltage ($V_{\\text{out}}$).\n\n---\n\n### 1. Circuit Topology Overview\n\n1. **First Stage ($M_1$): Common-Gate (CG) Amplifier**\n   * Transistor $M_1$ has its gate biased at a constant DC voltage $V_b$ (AC ground).\n   * The input signal current $I_{\\text{in}}$ is applied to the source of $M_1$.\n   * Node $X$ serves as the output of this first stage, loaded by resistor $R_{\\text{D1}}$.\n\n2. **Second Stage ($M_2$): Common-Source (CS) Amplifier**\n   * Transistor $M_2$ has its gate driven by node $X$ and its source tied to ground.\n   * Node $V_{\\text{out}}$ is the drain of $M_2$, loaded by resistor $R_{\\text{D2}}$.\n\n3. **Feedback Network ($R_F$)**\n   * Resistor $R_F$ connects the output node $V_{\\text{out}}$ back to the input node (source of $M_1$).\n   * **Feedback Type:** **Shunt-Shunt (Voltage-Current)** negative feedback.\n     * *Output sampling:* Voltage sampling (connected in parallel across $V_{\\text{out}}$).\n     * *Input mixing:* Current mixing (connected in parallel at the input current node).\n\n---\n\n### 2. Qualitative Analysis & Feedback Polarity\n\nTo verify that the feedback is **negative**:\n1. Suppose $I_{\\text{in}}$ increases into the source node of $M_1$.\n2. The source voltage $v_{s1}$ increases $\\rightarrow$ $V_{GS1} = V_b - v_{s1}$ decreases.\n3. Drain current of $M_1$ decreases $\\rightarrow$ Node $X$ voltage ($v_X$) **increases** (pulled up toward $V_{\\text{DD}}$ by $R_{\\text{D1}}$).\n4. $v_X$ increases $\\rightarrow$ $V_{GS2}$ of $M_2$ increases $\\rightarrow M_2$ turns on more $\\rightarrow v_{\\text{out}}$ **decreases**.\n5. As $v_{\\text{out}}$ drops, the current $i_{\\text{RF}} = \\frac{v_{\\text{out}} - v_{s1}}{R_F}$ decreases (pulls current away from the input node), opposing the initial increase in $I_{\\text{in}}$.\n\n$\\rightarrow$ **Conclusion:** The feedback loop is **negative**.\n\n---\n\n### 3. Quantitative Small-Signal Analysis\n\nAssuming small-signal transconductances $g_{m1}$ and $g_{m2}$, and neglecting channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$) for simplicity:\n\n#### **A. Closed-Loop Transimpedance Gain ($Z_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)**\n\nWriting KCL at each node:\n\n1. **At Node $X$:**\n   $$v_X = g_{m1} R_{\\text{D1}} v_{s1}$$\n\n2. **At Output Node ($v_{\\text{out}}$):**\n   $$\\frac{v_{\\text{out}}}{R_{\\text{D2}}} + \\frac{v_{\\text{out}} - v_{s1}}{R_F} + g_{m2} v_X = 0$$\n   Substituting $v_X$:\n   $$v_{\\text{out}} \\left( \\frac{1}{R_{\\text{D2}}} + \\frac{1}{R_F} \\right) = v_{s1} \\left( \\frac{1}{R_F} - g_{m1} g_{m2} R_{\\text{D1}} \\right)$$\n\n3. **At Input Node ($v_{s1}$):**\n   $$i_{\\text{in}} + \\frac{v_{\\text{out}} - v_{s1}}{R_F} = -g_{m1} v_{s1} \\implies i_{\\text{in}} = v_{s1} \\left( \\frac{1}{R_F} - g_{m1} \\right) - \\frac{v_{\\text{out}}}{R_F}$$\n\nCombining these equations gives the exact closed-loop gain:\n$$Z_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{R_{\\text{D2}} (1 - g_{m1} g_{m2} R_{\\text{D1}} R_F)}{1 + g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}} - g_{m1}(R_F + R_{\\text{D2}})}$$\n\nUnder high loop gain conditions ($g_{m1} g_{m2} R_{\\text{D1}} R_F \\gg 1$), this simplifies to the ideal transimpedance relation:\n$$\\mathbf{Z_T \\approx -R_F}$$\n\n---\n\n#### **B. Input Resistance ($R_{\\text{in}}$)**\n\nShunt feedback at the input significantly reduces input impedance:\n\n$$R_{\\text{in}} = \\frac{v_{s1}}{i_{\\text{in}}} \\approx \\frac{R_{\\text{D2}} + R_F}{g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}}}$$\n\n* **Significance:** A very low input resistance isolates the bandwidth from input parasitic capacitances (such as photodiode capacitance).\n\n---\n\n#### **C. Output Resistance ($R_{\\text{out}}$)**\n\nDeactivating $i_{\\text{in}} = 0$ and applying a test voltage $v_{\\text{test}}$ at the output:\n\n$$R_{\\text{out}} = R_{\\text{D2}} \\parallel \\left( \\frac{1 + g_{m1} R_F}{g_{m1} (1 + g_{m2} R_{\\text{D1}})} \\right) \\approx R_{\\text{D2}} \\parallel \\frac{R_F}{g_{m2} R_{\\text{D1}}}$$\n\n* **Significance:** Shunt feedback at the output reduces the output impedance, improving output driving capability.\n\n---\n\n### 4. Summary of Key Characteristics\n\n| Parameter | Approximation | Characteristic |\n| :--- | :--- | :--- |\n| **Circuit Function** | Transimpedance Amplifier (TIA) | Converts current $I_{\\text{in}}$ to voltage $V_{\\text{out}}$ |\n| **Feedback Type** | Shunt-Shunt Negative Feedback | Reduces both input and output impedances |\n| **Gain ($Z_T$)** | $\\approx -R_F$ | Set primarily by feedback resistor $R_F$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\approx \\frac{R_{\\text{D2}} + R_F}{g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}}}$ | Extremely low (high speed, wide bandwidth) |\n| **Output Resistance ($R_{\\text{out}}$)**| $\\approx R_{\\text{D2}} \\parallel \\frac{R_F}{g_{m2} R_{\\text{D1}}}$ | Low output impedance |",
        "format": "markdown",
        "sha256": "ff60cc6417e8ca9b1b4183ba002f6951aa4ef489dffdfecee56e9d464521e192"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from Vout to the input, forming a TIA. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 7271,
        "total_tokens": 8365,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5589,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 7271,
        "total_tokens": 8365,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5589,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **two-stage regulated Transimpedance Amplifier (TIA)** with **shunt-shunt (voltage-current) negative feedback**. \n\nIt is widely used in optical communication receivers (such as photodiode front-ends) and high-speed RF/analog applications due to its very low input impedance and broad bandwidth.\n\n---\n\n### 1. Topology Breakdown\n\n* **Stage 1 ($M_1$): Common-Gate (CG) Amplifier**\n  * **Gate**: Biased at fixed DC voltage $V_b$ (AC ground).\n  * **Source**: Input node (connected to $I_{\\text{in}}$).\n  * **Drain (Node $X$)**: Output of Stage 1.\n  * **Function**: Provides a low input impedance path and a **non-inverting** voltage gain from the source to Node $X$.\n\n* **Stage 2 ($M_2$): Common-Source (CS) Amplifier**\n  * **Gate**: Driven by Node $X$.\n  * **Source**: Connected to ground.\n  * **Drain ($V_{\\text{out}}$)**: Output node of the overall circuit.\n  * **Function**: Provides high voltage gain with **inversion** (180° phase shift) from Node $X$ to $V_{\\text{out}}$.\n\n* **Feedback Network ($R_F$)**\n  * Senses the output voltage $V_{\\text{out}}$ (shunt-sensing) and feeds back a current $i_{\\text{RF}}$ to the input source node of $M_1$ (shunt-mixing).\n  * Since the overall forward path has a net **inverting** gain ($\\text{CG} \\times \\text{CS} = (+A_1) \\times (-A_2) = -A$), the feedback through $R_F$ is **negative**.\n\n---\n\n### 2. Small-Signal Analysis & Closed-Loop Gain\n\nAssuming small-signal MOSFET parameters ($g_{m1}, g_{m2}$) and neglecting channel-length modulation ($r_o \\to \\infty$) for simplicity:\n\n#### A. Node $X$ Voltage ($v_x$)\nThe small-signal current flowing up into the source of $M_1$ is $i_{d1} = g_{m1} v_{\\text{in}}$ (where $v_{\\text{in}}$ is the small-signal voltage at the input node):\n$$v_x = + g_{m1} R_{D1} v_{\\text{in}}$$\n\n#### B. Output Voltage ($v_{\\text{out}}$)\n$M_2$ amplifies $v_x$ with a common-source gain:\n$$v_{\\text{out}} \\approx - g_{m2} (R_{D2} \\parallel R_F) v_x = - g_{m1} g_{m2} R_{D1} (R_{D2} \\parallel R_F) v_{\\text{in}}$$\n\nThe open-loop voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$ is:\n$$A_v = - g_{m1} g_{m2} R_{D1} (R_{D2} \\parallel R_F)$$\n\n#### C. Transimpedance Gain ($R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)\nApplying Kirchhoff's Current Law (KCL) at the input node:\n$$i_{\\text{in}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{R_F} = g_{m1} v_{\\text{in}}$$\n\n$$i_{\\text{in}} = v_{\\text{in}}\\left(g_{m1} + \\frac{1}{R_F}\\right) - \\frac{v_{\\text{out}}}{R_F}$$\n\nSince $v_{\\text{in}} = \\frac{v_{\\text{out}}}{A_v}$:\n$$i_{\\text{in}} = v_{\\text{out}} \\left( \\frac{g_{m1} + 1/R_F}{A_v} - \\frac{1}{R_F} \\right)$$\n\nFor high open-loop gain ($|A_v| \\gg 1$):\n$$R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx -R_F$$\n\n---\n\n### 3. Key Impedance Characteristics\n\n1. **Input Resistance ($R_{\\text{in}}$):**\n   Without feedback, the input resistance looking into the source of $M_1$ is $R_{\\text{in,open}} \\approx \\frac{1}{g_{m1}}$. \n   With shunt-shunt negative feedback, $R_{\\text{in}}$ is significantly reduced by the loop gain $T$:\n   $$R_{\\text{in}} \\approx \\frac{1}{g_{m1} (1 + T)}$$\n   * **Advantage:** An extremely low input impedance isolates the parasitic input capacitance (e.g., from a photodiode), pushing the input pole to a high frequency and maximizing bandwidth.\n\n2. **Output Resistance ($R_{\\text{out}}$):**\n   Because voltage is sensed at the output (shunt connection), the output impedance is also lowered:\n   $$R_{\\text{out}} \\approx \\frac{R_{D2}}{1 + T}$$\n\n---\n\n### Summary of Features\n\n| Parameter | Expression / Characteristic | Benefit |\n| :--- | :--- | :--- |\n| **Feedback Type** | Shunt-Shunt (Voltage-Current) | Converts current input to voltage output |\n| **Transimpedance Gain ($R_T$)** | $\\approx -R_F$ | Precise, well-defined gain determined by $R_F$ |\n| **Input Impedance ($R_{\\text{in}}$)** | Very Low ($\\approx \\frac{1}{g_{m1}(1+T)}$) | High speed; reduces RC delay at input |\n| **Output Impedance ($R_{\\text{out}}$)** | Very Low ($\\approx \\frac{R_{D2}}{1+T}$) | Good drive capability for subsequent stages |\n| **Primary Application** | Photodiode receivers, Optical Communication, Low-noise TIA front-ends |",
        "format": "markdown",
        "sha256": "5bc94cded86657d49b6dc9a7ee5e5a1d34dfd01ed4788051dcd874b5d94d4961"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a negative-feedback transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 4864,
        "total_tokens": 5958,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3488,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 4864,
        "total_tokens": 5958,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3488,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed circuit analysis of the given schematic.\n\n---\n\n### **1. Circuit Overview & Topology**\n\n* **Circuit Type:** Transimpedance Amplifier (TIA) / Current-to-Voltage Converter with negative feedback.\n* **First Stage ($M_1$):** **Common-Gate (CG)** configuration. \n  * The input current signal $I_{\\text{in}}$ is applied to the source of $M_1$.\n  * The gate is connected to a fixed DC bias voltage $V_b$.\n  * Provides low input impedance and converts the input current into a voltage signal at node $X$.\n* **Second Stage ($M_2$):** **Common-Source (CS)** configuration.\n  * The gate is driven by node $X$.\n  * The source is connected to ground.\n  * Provides high voltage gain from node $X$ to the output node $V_{\\text{out}}$.\n* **Feedback Network ($R_F$):** \n  * Connected between the output node ($V_{\\text{out}}$) and the input node (source of $M_1$).\n  * **Feedback Type:** **Shunt-Shunt (Voltage-Current) Negative Feedback**.\n    * *Output sensing:* Voltage sensing (shunt at output).\n    * *Input mixing:* Current mixing (shunt at input).\n\n---\n\n### **2. Qualitative Operation & Negative Feedback Verification**\n\nTo verify that the feedback loop is negative:\n1. Assume the input current $I_{\\text{in}}$ increases (pulling current out or pushing current into the source of $M_1$).\n2. An increase in source voltage $V_{s1}$ decreases $V_{gs1} = V_b - V_{s1}$.\n3. A smaller $V_{gs1}$ decreases the drain current of $M_1$, causing node $X$ voltage ($V_X$) to **increase** ($V_X = V_{\\text{DD}} - I_{d1}R_{\\text{D1}}$).\n4. An increase in $V_X$ increases $V_{gs2}$ of transistor $M_2$, drawing more current through $R_{\\text{D2}}$.\n5. This causes $V_{\\text{out}}$ to **decrease** ($V_{\\text{out}} = V_{\\text{DD}} - I_{d2}R_{\\text{D2}}$).\n6. As $V_{\\text{out}}$ drops, the current $i_{\\text{RF}} = \\frac{V_{\\text{out}} - V_{s1}}{R_F}$ decreases (pulls current away from the input node), opposing the initial rise in input voltage/current.\n\n**Conclusion:** The feedback is **negative**.\n\n---\n\n### **3. Quantitative Small-Signal Analysis**\n\nAssuming channel-length modulation is negligible ($r_{o1}, r_{o2} \\to \\infty$) for simplicity:\n\n#### **A. Open-Loop Parameters**\n* **First Stage Gain (CG):**\n  $$v_X \\approx i_{\\text{in}} \\cdot R_{\\text{D1}}$$\n* **Second Stage Gain (CS):**\n  $$v_{\\text{out}} = -g_{m2} R_{\\text{D2}} \\cdot v_X$$\n* **Open-Loop Transimpedance ($A_z$):**\n  $$A_z = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = -g_{m2} R_{\\text{D1}} R_{\\text{D2}}$$\n* **Feedback Factor ($\\beta$):**\n  $$\\beta = \\frac{i_{\\text{RF}}}{v_{\\text{out}}} \\approx -\\frac{1}{R_F}$$\n\n---\n\n#### **B. Closed-Loop Transimpedance Gain ($R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)**\n\nBy applying Kirchhoff's Current Law (KCL) at the input node (Source of $M_1$):\n\n1. $i_{\\text{in}} + i_{\\text{RF}} = i_{d1} \\implies i_{\\text{in}} + \\frac{v_{\\text{out}} - v_{s1}}{R_F} = -g_{m1} v_{s1}$\n2. Expressing $v_{s1}$ in terms of $v_{\\text{out}}$:\n   $$v_X = g_{m1} R_{\\text{D1}} v_{s1}$$\n   $$v_{\\text{out}} = -g_{m2} R_{\\text{D2}} v_X = -g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}} v_{s1} \\implies v_{s1} = -\\frac{v_{\\text{out}}}{g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}}}$$\n\nSubstituting $v_{s1}$ back into the KCL equation:\n$$i_{\\text{in}} = -v_{\\text{out}} \\left[ \\frac{1}{R_F} + \\frac{1 - g_{m1} R_F}{g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}} R_F} \\right]$$\n\nSolving for closed-loop transresistance $R_m$:\n$$R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{-R_F}{1 + \\frac{1 - g_{m1}R_F}{g_{m1}g_{m2}R_{\\text{D1}}R_{\\text{D2}}}}$$\n\nIf the loop gain is sufficiently large ($g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}} \\gg 1$), the closed-loop gain simplifies to:\n$$\\mathbf{R_m \\approx -R_F}$$\n\n---\n\n#### **C. Closed-Loop Input Resistance ($R_{\\text{in}}$)**\n\nWithout feedback, the input resistance looking into the source of common-gate transistor $M_1$ is $R_{\\text{in, open}} \\approx \\frac{1}{g_{m1}}$.\n\nWith shunt negative feedback, the input resistance is reduced by the loop gain:\n$$R_{\\text{in, closed}} \\approx \\frac{R_F}{g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}}}$$\n\n* **Key benefit:** This extremely low input resistance is ideal for accepting current signals with minimal voltage disturbance at the input node.\n\n---\n\n#### **D. Closed-Loop Output Resistance ($R_{\\text{out}}$)**\n\nWithout feedback, $R_{\\text{out, open}} \\approx R_{\\text{D2}}$.\n\nWith shunt negative feedback:\n$$R_{\\text{out, closed}} \\approx \\frac{R_{\\text{D2}}}{1 + T}$$\nwhere loop gain $T \\approx \\frac{g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}}}{1 + g_{m1} R_F}$.\n\n---\n\n### **4. Summary of Key Characteristics**\n\n| Parameter | Value / Expression | Notes |\n| :--- | :--- | :--- |\n| **Gain Type** | Transimpedance ($V_{\\text{out}}/I_{\\text{in}}$) | Converts current input to voltage output |\n| **Feedback Type** | Shunt-Shunt Negative Feedback | Uses resistor $R_F$ |\n| **Ideal Gain** | $R_m \\approx -R_F$ | Set precisely by the feedback resistor |\n| **Input Resistance** | Very Low ($\\approx \\frac{R_F}{A_v}$) | Excellent for current sensing / optical receivers |\n| **Output Resistance** | Reduced by loop gain | Low output impedance drives load easily |",
        "format": "markdown",
        "sha256": "b0f4e11d043a1b109fa8283218c64d2e4c98d0b9b2145a5b72af69ab24639a67"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from Vout to the input, forming a transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 5143,
        "total_tokens": 6237,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3396,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 5143,
        "total_tokens": 6237,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3396,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Regulated Common-Gate Transimpedance Amplifier (TIA)** (or **Common-Gate Current Buffer with Active Feedback**). \n\nIt is widely used in high-speed CMOS analog design to convert an input current $I_{\\text{in}}$ into an output voltage $V_{\\text{out}}$ while achieving an **extremely low input impedance** and **high bandwidth**.\n\n---\n\n### 1. Component Identification & Circuit Overview\n\n* **$M_1$ (NMOS):** Functions as a **Common-Gate (CG)** primary amplifier stage. Its gate is tied to a fixed DC bias voltage $V_b$, its source is connected to the input node (let's label it Node $X$), and its drain is connected to $V_{\\text{out}}$.\n* **$M_2$ (PMOS):** Functions as a **Common-Source (CS)** active feedback transistor. Its source is connected to $V_{DD}$, its gate senses the output voltage $V_{\\text{out}}$, and its drain feeds current back into the input node $X$.\n* **Current Source $I_1$:** Serves as a high-impedance active load for $M_1$ and sets its DC bias current.\n* **Current Sink (bottom):** Sinks the combined DC bias current to ground, ensuring both $M_1$ and $M_2$ stay properly biased in the saturation region.\n* **$I_{\\text{in}}$:** The small-signal input current.\n\n---\n\n### 2. DC Biasing Analysis\n\n1. **$M_1$ Bias Current:** The current source $I_1$ forces a constant DC current through $M_1$, so $I_{D1} = I_1$.\n2. **Input Node DC Voltage ($V_X$):** Set by the gate voltage of $M_1$:\n   $$V_X = V_b - V_{GS1}$$\n3. **$M_2$ Bias Current:** The bottom current source $I_0$ sinks total current from Node $X$. By KCL at Node $X$ (for $I_{\\text{in}} = 0$):\n   $$I_{D2} = I_0 - I_1$$\n4. **Output Voltage ($V_{\\text{out}}$):** The output node self-adjusts its DC level to keep $M_2$ conducting $I_{D2}$:\n   $$V_{\\text{out}} = V_{DD} - |V_{GS2}|$$\n\n---\n\n### 3. Qualitative Operation (Negative Feedback Mechanism)\n\nThe circuit employs a local **shunt-series active negative feedback loop**:\n\n1. If an input current $I_{\\text{in}}$ is injected into the input node $X$, the node voltage $V_X$ tends to rise ($\\Delta V_X > 0$).\n2. As $V_X$ increases, the gate-to-source voltage of NMOS transistor $M_1$ decreases ($V_{GS1} = V_b - V_X \\downarrow$), reducing the current through $M_1$.\n3. Since $I_1$ is a fixed current source, the reduction in $I_{D1}$ causes the voltage at node $V_{\\text{out}}$ to **increase** ($\\Delta V_{\\text{out}} > 0$).\n4. A higher $V_{\\text{out}}$ reduces the source-to-gate overdrive of PMOS transistor $M_2$ ($V_{SG2} = V_{DD} - V_{\\text{out}} \\downarrow$), which decreases $M_2$'s drain current injected into Node $X$.\n5. Lower current injected into Node $X$ counteracts the initial voltage rise at $V_X$, keeping the input node tightly regulated.\n\n---\n\n### 4. Small-Signal Quantitative Analysis\n\nLet:\n* $g_{m1}, g_{m2}$ = transconductances of $M_1$ and $M_2$\n* $g_{m1}' = g_{m1} + g_{mb1}$ (including body effect for $M_1$)\n* $r_{o1}, r_{o2}$ = output resistances of $M_1$ and $M_2$\n* $R_{I1}, R_0$ = finite output resistances of the current sources $I_1$ and $I_0$\n\n---\n\n#### A. Input Impedance ($R_{\\text{in}}$)\n\nWithout feedback, the input resistance looking into the source of a common-gate stage is $\\approx \\frac{1}{g_{m1}'}$. \n\nWith the active feedback loop through $M_2$:\n* Voltage gain from Node $X$ to $V_{\\text{out}}$: $A_{v1} \\approx g_{m1}' r_{o1}$\n* Feedback transconductance: $g_{m2}$\n\nThe loop gain is $T \\approx g_{m1}' r_{o1} \\cdot g_{m2} r_{o2}$. \n\nCalculating $R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}}$ gives:\n$$R_{\\text{in}} \\approx \\frac{1}{g_{m2} (1 + g_{m1}' r_{o1}) + \\frac{1}{r_{o2}}} \\approx \\frac{1}{g_{m2} g_{m1}' r_{o1}}$$\n\n> **Key Takeaway:** The input resistance is reduced by the voltage gain of $M_1$ ($g_{m1}' r_{o1}$), making $R_{\\text{in}}$ **significantly lower** than a standard common-gate stage.\n\n---\n\n#### B. Transimpedance Gain ($Z_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)\n\nFor ideal current sources ($R_{I1} \\to \\infty$):\n* No small-signal current flows through $M_1$, meaning $i_{d1} = 0$.\n* All of $i_{\\text{in}}$ must be absorbed by the change in $M_2$'s drain current:\n  $$i_{\\text{in}} = -i_{d2} = g_{m2} v_{\\text{out}}$$\n\nThus, the low-frequency transimpedance gain simplifies to:\n$$Z_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx \\frac{1}{g_{m2}}$$\n\nIncluding finite channel-length modulation ($r_{o1}, r_{o2}$) and current source impedance ($R_{I1}$):\n$$Z_m \\approx \\frac{1}{g_{m2} + \\frac{1}{R_{I1}} + \\frac{1}{g_{m1}' r_{o1} r_{o2}}}$$\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\n\nLooking into the output node $V_{\\text{out}}$, applying a test voltage $v_t$:\n$$R_{\\text{out}} \\approx \\frac{1}{g_{m2}} \\parallel R_{I1} \\approx \\frac{1}{g_{m2}}$$\n\n---\n\n### 5. Summary of Circuit Properties\n\n| Parameter | Formula (Approximate) | Characteristic |\n| :--- | :--- | :--- |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\dfrac{1}{g_{m2} g_{m1}' r_{o1}}$ | Extremely Low |\n| **Transimpedance Gain ($Z_m$)** | $\\dfrac{1}{g_{m2}}$ | Set inversely by $M_2$'s $g_m$ |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\dfrac{1}{g_{m2}}$ | Low |\n| **Dominant Application** | High-speed optical receiver TIAs, current buffers for capacitive sensors | Highly stable input node potential, high bandwidth |",
        "format": "markdown",
        "sha256": "18280687a95b89104a4727b94d9ff69fbf32be17f5ba703662be1fc188df2e85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device, the PMOS feedback path from Vout to the input node, and the key low-input-resistance and approximately 1/gm2 transimpedance/output-resistance results. Minor terminology and modeling issues do not undermine the essential analysis.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 11859,
        "total_tokens": 12948,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 11859,
        "total_tokens": 12948,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is an **active-feedback Transimpedance Amplifier (TIA)**, also known as a **Regulated Common-Gate Current Buffer / TIA**. It converts an input current signal ($I_{\\text{in}}$) into an output voltage signal ($V_{\\text{out}}$).\n\n---\n\n### 1. Circuit Component Roles\n\n* **$M_1$ (NMOS Transistor):** Configured as a **Common-Gate (CG)** amplifier stage. Its gate is tied to a fixed bias voltage $V_b$, its source is connected to the input node ($X$), and its drain is connected to the output node ($V_{\\text{out}}$).\n* **$M_2$ (PMOS Transistor):** Functions as a **Common-Source (CS)** active negative feedback element. Its gate senses the output voltage $V_{\\text{out}}$, its source is tied to $V_{DD}$, and its drain feeds back into node $X$.\n* **$I_1$:** An ideal (or high-impedance) current source that sets the DC bias current of $M_1$ and acts as a high-resistance active load at node $V_{\\text{out}}$.\n* **Bottom Current Source ($I_{\\text{bias}}$):** Sets the DC operating point at input node $X$.\n* **$I_{\\text{in}}$:** The small-signal input current source.\n\n---\n\n### 2. Operating Principle & Feedback Loop\n\nThe circuit employs a **shunt-shunt (voltage-current) negative feedback loop**:\n\n1. **Sensing:** The output voltage $V_{\\text{out}}$ is sensed by the gate of $M_2$.\n2. **Feedback:** If the voltage at node $X$ increases ($V_X \\uparrow$), $V_{GS1} = V_b - V_X$ decreases, causing $M_1$'s drain current to drop.\n3. **Amplification:** The current drop in $M_1$ against the high impedance of current source $I_1$ causes $V_{\\text{out}}$ to rise sharply ($V_{\\text{out}} \\uparrow$).\n4. **Correction:** The rise in $V_{\\text{out}}$ reduces the overdrive of PMOS transistor $M_2$ ($V_{SG2} = V_{DD} - V_{\\text{out}} \\downarrow$), decreasing its drain current into node $X$, which pulls $V_X$ back down.\n\nThis strong local feedback regulates node $X$ to behave as a **virtual ground** for AC signals.\n\n---\n\n### 3. Small-Signal Analysis\n\nLet $g_{m1}, g_{m2}$ be the transconductances, and $r_{o1}, r_{o2}$ be the output resistances of $M_1$ and $M_2$, respectively.\n\n#### A. Transimpedance Gain ($R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)\n* **KCL at node $V_{\\text{out}}$:**\n  Assuming $I_1$ has ideal infinite output impedance:\n  $$i_{d1} = -g_{m1} v_x + \\frac{v_{\\text{out}} - v_x}{r_{o1}} = 0 \\implies v_{\\text{out}} = v_x (1 + g_{m1} r_{o1})$$\n  Since $g_{m1} r_{o1} \\gg 1$, the open-loop voltage gain of the CG stage is $A_{v1} \\approx g_{m1} r_{o1}$.\n\n* **KCL at input node $X$:**\n  $$i_{\\text{in}} + i_{d2} = 0 \\implies i_{\\text{in}} = g_{m2} v_{\\text{out}} + \\frac{v_x}{r_{o2}}$$\n\n  Substituting $v_x = \\frac{v_{\\text{out}}}{1 + g_{m1} r_{o1}}$:\n  $$i_{\\text{in}} = v_{\\text{out}} \\left( g_{m2} + \\frac{1}{r_{o2}(1 + g_{m1} r_{o1})} \\right)$$\n\n  Therefore, the closed-loop transimpedance gain is:\n  $$\\mathbf{R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx \\frac{1}{g_{m2}}}$$\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into node $X$:\n$$R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = \\frac{v_{\\text{out}} / A_{v1}}{g_{m2} v_{\\text{out}}} = \\mathbf{\\frac{1}{g_{m2} \\cdot A_{v1}} = \\frac{1}{g_{m2} \\, g_{m1} \\, r_{o1}}}$$\n\n* **Significance:** The active feedback reduces the input impedance of the common-gate stage by an extra factor of $g_{m2} r_{o1}$, resulting in an **extremely low input resistance**.\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nLooking into $V_{\\text{out}}$:\n$$R_{\\text{out}} \\approx \\mathbf{\\frac{1}{g_{m2}}}$$\n\n---\n\n### 4. Summary of Key Features\n\n| Parameter | Formula |\n| :--- | :--- |\n| **Circuit Topology** | Active-Feedback Transimpedance Amplifier (Shunt-Shunt) |\n| **Transimpedance Gain ($R_m$)** | $\\approx \\frac{1}{g_{m2}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\approx \\frac{1}{g_{m1} g_{m2} r_{o1}}$ (Extremely Low) |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m2}}$ (Low) |\n\n### Key Advantages\n1. **High Bandwidth:** The very low input impedance minimizes the $RC$ time constant at the input node, preventing parasitic capacitance (e.g., from a photodiode) from limiting the overall bandwidth.\n2. **Defined Gain:** The transimpedance gain is simply set by $\\frac{1}{g_{m2}}$, making it robust and easy to tune via $M_2$'s bias current.",
        "format": "markdown",
        "sha256": "e6b3e9cbb96dfd8e3c7436d7173915f6b66664c6e03551b25c9be1c0af89727b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, describes feedback to the input node, and gives the very low input resistance and the expected transimpedance/output resistance of approximately 1/gm2.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 7195,
        "total_tokens": 8284,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 7195,
        "total_tokens": 8284,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### Circuit Overview\n\nThe circuit shown in the figure is an **Active-Feedback (or Regulated) Common-Gate Transimpedance Amplifier (TIA)** / **Current Buffer**. \n\nIt consists of:\n* **$M_1$ (NMOS)**: Operating as a **Common-Gate (CG)** amplifier stage inside the active feedback loop.\n* **$M_2$ (PMOS)**: Operating as a **feedback transistor** (in a common-source configuration).\n* **$I_1$**: A constant current source acting as an active load at the output node $V_{\\text{out}}$.\n* **$I_{\\text{in}}$**: The AC input signal current source at node $V_X$.\n* **Lower Current Source**: Provides the necessary DC bias current $I_B$ for node $X$.\n* **$V_b$**: Fixed DC bias voltage at the gate of $M_1$.\n\n---\n\n### 1. Qualitative Operation & Negative Feedback\n\n1. **Signal Flow**:\n   * An increase in the input current $I_{\\text{in}}$ tends to raise the node voltage $V_X$.\n   * As $V_X \\uparrow$, the gate-source voltage of $M_1$ decreases ($V_{GS1} = V_b - V_X \\downarrow$), which decreases $M_1$'s drain current $I_{D1}$.\n   * Current source $I_1$ supplies a fixed current. Since $I_{D1}$ decreases, the excess current pulls up node $V_{\\text{out}}$ ($V_{\\text{out}} \\uparrow$).\n   * As $V_{\\text{out}} \\uparrow$, the source-gate voltage of $M_2$ decreases ($V_{SG2} = V_{\\text{DD}} - V_{\\text{out}} \\downarrow$), causing $M_2$'s drain current $I_{D2}$ to decrease.\n   * Reduced current flowing into node $X$ brings $V_X$ back down.\n\n2. **Feedback Loop Result**:\n   * This forms a **negative feedback loop** that tightly regulates the voltage at node $X$ (making it act as a virtual ground for small signals).\n   * It significantly lowers the input impedance compared to a standard common-gate stage.\n\n---\n\n### 2. DC / Biasing Analysis\n\nAssuming ideal current sources ($I_1$ and $I_B$) and no DC current drawn at $V_{\\text{out}}$:\n\n1. **Drain Current of $M_1$**:\n   $$I_{D1} = I_1$$\n\n2. **DC Voltage at Node $X$ ($V_X$)**:\n   $$V_X = V_b - V_{GS1} = V_b - \\left( V_{\\text{TH1}} + \\sqrt{\\frac{2 I_1}{\\mu_n C_{\\text{ox}} (W/L)_1}} \\right)$$\n\n3. **Drain Current of $M_2$**:\n   By KCL at node $X$:\n   $$I_{D2} = I_{D1} + I_B - I_{\\text{in,DC}} = I_1 + I_B - I_{\\text{in,DC}}$$\n\n4. **Output DC Voltage ($V_{\\text{out}}$)**:\n   $$V_{\\text{out}} = V_{\\text{DD}} - V_{SG2} = V_{\\text{DD}} - \\left( |V_{\\text{TH2}}| + \\sqrt{\\frac{2 I_{D2}}{\\mu_p C_{\\text{ox}} (W/L)_2}} \\right)$$\n\n5. **Conditions for Saturation**:\n   * **$M_1$ (NMOS)**: $V_{\\text{out}} \\ge V_b - V_{\\text{TH1}}$\n   * **$M_2$ (PMOS)**: $V_{\\text{out}} - V_X \\ge -|V_{\\text{TH2}}|$\n\n---\n\n### 3. Small-Signal Analysis\n\nLet $g_{m1}, r_{o1}$ be the small-signal parameters of $M_1$, and $g_{m2}, r_{o2}$ be those of $M_2$.\n\n#### A. Input Resistance ($R_{\\text{in}}$)\nLooking into node $X$:\n1. A small-signal voltage $v_x$ creates $v_{gs1} = -v_x$.\n2. The voltage gain from node $X$ to $V_{\\text{out}}$ (via $M_1$) is:\n   $$A_v = \\frac{v_{\\text{out}}}{v_x} \\approx 1 + g_{m1} r_{o1} \\approx g_{m1} r_{o1}$$\n3. $v_{\\text{out}}$ drives the gate of $M_2$, generating a feedback current:\n   $$i_{d2} \\approx -g_{m2} v_{\\text{out}} = -g_{m2} (1 + g_{m1} r_{o1}) v_x$$\n4. The total current entering node $X$ is $i_x \\approx -i_{d2}$. Thus:\n\n$$R_{\\text{in}} = \\frac{v_x}{i_x} \\approx \\frac{1}{g_{m2} (1 + g_{m1} r_{o1}) + \\frac{1}{r_{o2}}} \\approx \\frac{1}{g_{m1} g_{m2} r_{o1}}$$\n\n> **Key Takeaway**: A standard common-gate stage has $R_{\\text{in}} \\approx 1/g_{m1}$. The active feedback loop reduces $R_{\\text{in}}$ by a factor of $g_{m2} r_{o1}$, resulting in an **extremely low input resistance**.\n\n---\n\n#### B. Transimpedance Gain ($Z_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)\n1. Since the loop gain is high, $M_1$'s small-signal current $i_{d1} \\approx 0$.\n2. Almost all of the input current $i_{\\text{in}}$ is absorbed by $M_2$:\n   $$i_{\\text{in}} \\approx -i_{d2} \\approx g_{m2} v_{\\text{out}}$$\n3. Therefore:\n\n$$Z_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx \\frac{1}{g_{m2}}$$\n\n---\n\n### 4. Summary of Characteristics\n\n| Parameter | Expression | Description |\n| :--- | :--- | :--- |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\approx \\frac{1}{g_{m1} g_{m2} r_{o1}}$ | Extremely low due to active negative feedback. |\n| **Transimpedance Gain ($Z_m$)** | $\\approx \\frac{1}{g_{m2}}$ | Well-controlled, set by $M_2$'s transconductance. |\n| **Internal Voltage Gain ($V_{\\text{out}}/V_X$)** | $\\approx g_{m1} r_{o1}$ | High internal gain boosting loop bandwidth and lowering $R_{\\text{in}}$. |\n\n---\n\n### 5. Primary Applications\n* **Optical Receiver Front-Ends (TIAs)**: Used to convert weak photodiode currents into voltages while presenting low input impedance to mitigate photodiode capacitance.\n* **Low-Impedance Current Buffers**: Used in current-mode circuits where wide bandwidth and minimal signal distortion are needed at the input terminal.",
        "format": "markdown",
        "sha256": "0938e9715c1bc4cd369aaa94f4bbb67ff4baf6ad65abea677942a7dc866f3e14"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS, M2 as the PMOS feedback device driven by Vout, and the feedback path to the input node. It also gives the very low input resistance and the expected transimpedance of approximately 1/gm2, meeting the golden solution’s full-credit rule.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 11347,
        "total_tokens": 12436,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 11347,
        "total_tokens": 12436,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, the circuit does not fail to oscillate** if the load capacitors $C_L$ become arbitrarily large. It will simply oscillate at a lower frequency.\n\n---\n\n### **Detailed Analysis**\n\n#### **1. Frequency-Domain (Small-Signal) Analysis**\nEach inverter stage can be modeled around its bias point as a single-pole amplifier with a low-frequency gain $-A_0$ (where $A_0 = g_m R_{\\text{out}}$) and an output pole $\\omega_p = \\frac{1}{R_{\\text{out}} C_L}$.\n\nThe transfer function of a single stage is:\n$$H(s) = \\frac{-A_0}{1 + \\frac{s}{\\omega_p}}$$\n\nThe total loop gain $T(s)$ for the 3-stage ring oscillator is:\n$$T(s) = H(s)^3 = \\frac{-A_0^3}{\\left(1 + \\frac{s}{\\omega_p}\\right)^3}$$\n\n#### **2. Barkhausen Criterion for Oscillation**\nFor sustained oscillation, the loop gain must satisfy two conditions at the oscillation frequency $\\omega_{\\text{osc}}$:\n\n1. **Phase Condition:** The total phase shift around the loop must be an integer multiple of $360^\\circ$ (or $0^\\circ$). \n   - The three inverters provide an inherent $-180^\\circ$ phase shift at DC.\n   - The three poles must contribute an additional $-180^\\circ$ phase shift (or $-60^\\circ$ per pole):\n   $$\\tan^{-1}\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_p}\\right) = 60^\\circ \\implies \\frac{\\omega_{\\text{osc}}}{\\omega_p} = \\sqrt{3}$$\n   $$\\omega_{\\text{osc}} = \\sqrt{3} \\omega_p = \\frac{\\sqrt{3}}{R_{\\text{out}} C_L}$$\n\n2. **Gain Condition:** The magnitude of the loop gain at $\\omega_{\\text{osc}}$ must be at least unity ($|T(j\\omega_{\\text{osc}})| \\ge 1$):\n   $$|T(j\\omega_{\\text{osc}})| = \\frac{A_0^3}{\\left(\\sqrt{1^2 + (\\sqrt{3})^2}\\right)^3} = \\frac{A_0^3}{2^3} = \\left(\\frac{A_0}{2}\\right)^3$$\n   $$\\left(\\frac{A_0}{2}\\right)^3 \\ge 1 \\implies A_0 \\ge 2$$\n\n---\n\n### **Conclusion**\n* The condition for oscillation ($A_0 \\ge 2$) depends **only** on the DC gain $A_0 = g_m R_{\\text{out}}$ of each stage and is **completely independent of $C_L$**.\n* As $C_L$ becomes arbitrarily large, the pole frequency $\\omega_p$ moves closer to zero, causing the oscillation frequency $\\omega_{\\text{osc}} = \\frac{\\sqrt{3}}{R_{\\text{out}} C_L}$ to approach zero. \n* However, as long as $A_0 > 2$, the circuit maintains sufficient phase shift and gain to oscillate continuously—it just does so at an extremely low frequency.",
        "format": "markdown",
        "sha256": "6e35853062d8238b0c4ab09517acb8b9bebec1af07c898809da71c2ef4c7a5fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the three-capacitor ring continues oscillating at a lower frequency. The small-signal analysis shows the oscillation frequency scales inversely with capacitance while the gain condition is independent of capacitance.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2708,
        "total_tokens": 3818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2708,
        "total_tokens": 3818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, the circuit does not fail to oscillate.** \n\nAs the load capacitors $C_L$ become arbitrarily large, the circuit will continue to oscillate, but at a progressively lower frequency ($f_{\\text{osc}} \\propto 1/C_L$). \n\nThis can be explained through both **small-signal frequency-domain analysis** and **large-signal time-domain analysis**.\n\n---\n\n### 1. Small-Signal Analysis (Barkhausen Criterion)\n\nEach stage can be modeled as an inverter with a DC voltage gain of $-A_0 = -g_m R_{\\text{out}}$ and an output impedance consisting of $R_{\\text{out}}$ in parallel with $C_L$.\n\nThe transfer function of a single stage is:\n$$H(s) = \\frac{-A_0}{1 + s R_{\\text{out}} C_L}$$\n\nThe total loop transfer function for three identical stages is:\n$$L(s) = H(s)^3 = \\frac{-A_0^3}{(1 + s R_{\\text{out}} C_L)^3}$$\n\nFor oscillation to start, the total phase shift around the loop must be $360^\\circ$ (or $0^\\circ \\pmod{360^\\circ}$). Since the three inverters provide an inherent $180^\\circ$ phase shift at DC due to negative feedback, the three poles must together contribute an additional $180^\\circ$ phase shift, which means **$60^\\circ$ per stage**:\n\n$$\\tan^{-1}(\\omega_0 R_{\\text{out}} C_L) = 60^\\circ \\implies \\omega_0 R_{\\text{out}} C_L = \\sqrt{3} \\implies \\omega_0 = \\frac{\\sqrt{3}}{R_{\\text{out}} C_L}$$\n\nSubstituting $\\omega_0$ back into the magnitude of each stage’s transfer function:\n$$|H(j\\omega_0)| = \\frac{A_0}{\\sqrt{1 + (\\omega_0 R_{\\text{out}} C_L)^2}} = \\frac{A_0}{\\sqrt{1 + (\\sqrt{3})^2}} = \\frac{A_0}{2}$$\n\nFor the total loop gain magnitude to be at least $1$ at $\\omega_0$:\n$$|L(j\\omega_0)| = \\left(\\frac{A_0}{2}\\right)^3 \\ge 1 \\implies A_0 \\ge 2$$\n\n**Key Takeaway:** The oscillation criterion ($A_0 \\ge 2$) **is completely independent of $C_L$**. Increasing $C_L$ simply lowers the oscillation frequency $\\omega_0$, but it does not change the magnitude of the loop gain required for oscillation at that frequency.\n\n---\n\n### 2. Large-Signal (Time-Domain) Analysis\n\nIn non-linear/large-signal operation, the circuit acts as a ring oscillator where each stage charges and discharges $C_L$ between supply rails:\n\n1. When an inverter turns ON, its output resistance $R_{\\text{out}}$ charges or discharges the load capacitor $C_L$.\n2. The propagation delay $\\tau_d$ of each stage is proportional to the RC time constant:\n   $$\\tau_d \\approx R_{\\text{out}} C_L \\ln(2)$$\n3. The total period of oscillation for a 3-stage ring oscillator is $T = 6 \\tau_d \\propto C_L$.\n\nAs $C_L \\to \\infty$, the propagation delay $\\tau_d \\to \\infty$ and the frequency $f_{\\text{osc}} = \\frac{1}{T} \\to 0$, but the state transitions will still occur indefinitely as long as the circuit has sufficient DC gain to cross the switching threshold of the next stage.\n\n---\n\n### Conclusion\nThe circuit **will not fail to oscillate** regardless of how large $C_L$ becomes, provided the DC gain of each inverter satisfies $A_0 > 2$. The only effect of increasing $C_L$ is a proportional increase in the oscillation period (i.e., a decrease in frequency).",
        "format": "markdown",
        "sha256": "417011142d8563ea77922b3644ceaf5729827842bd3a86818296e68091ee5470"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors slow the ring without stopping oscillation, and supports this with the valid per-stage phase and gain condition showing the required gain is independent of capacitance.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3078,
        "total_tokens": 4188,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3078,
        "total_tokens": 4188,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, the circuit does not fail to oscillate.** \n\nAs the load capacitors ($C_L$) become arbitrarily large, the circuit will **continue to oscillate**, but at a progressively **lower frequency**.\n\n---\n\n### 1. Small-Signal Analysis (Barkhausen Criterion)\n\nConsider each of the 3 inverter stages modeled as a transconductance amplifier with an output resistance $R_{\\text{out}}$ driving a load capacitor $C_L$:\n\n* **Transfer function of one stage:**\n  $$H(s) = \\frac{-A_0}{1 + \\frac{s}{\\omega_p}}$$\n  where:\n  * $A_0 = g_m R_{\\text{out}}$ is the small-signal DC voltage gain per stage.\n  * $\\omega_p = \\frac{1}{R_{\\text{out}} C_L}$ is the pole frequency created by the output resistance and load capacitance.\n\n* **Total loop transfer function:**\n  $$L(s) = H(s)^3 = \\frac{-A_0^3}{\\left(1 + \\frac{s}{\\omega_p}\\right)^3}$$\n\n#### Oscillation Condition:\nFor self-sustained oscillation to occur:\n1. **Phase Condition:** The 3-stage loop must introduce a total phase shift of $180^\\circ$ (plus the intrinsic $180^\\circ$ inversion from the odd number of stages). Each stage must contribute a phase lag of $60^\\circ$:\n   $$\\tan\\phi = \\frac{\\omega_{\\text{osc}}}{\\omega_p} = \\tan(60^\\circ) = \\sqrt{3}$$\n   $$\\omega_{\\text{osc}} = \\sqrt{3} \\, \\omega_p = \\frac{\\sqrt{3}}{R_{\\text{out}} C_L}$$\n\n2. **Gain Condition:** At $\\omega_{\\text{osc}}$, the magnitude of the loop gain must be at least unity ($|L(j\\omega_{\\text{osc}})| \\ge 1$):\n   $$\\left| 1 + j\\frac{\\omega_{\\text{osc}}}{\\omega_p} \\right|^3 = (1 + 3)^{3/2} = 8$$\n   $$\\frac{A_0^3}{8} \\ge 1 \\implies A_0 \\ge 2$$\n\n#### Key Insight:\nThe minimum DC gain required for startup is **$A_0 \\ge 2$**, which depends **only** on the transistor parameters ($g_m$ and $R_{\\text{out}}$) and is **completely independent of $C_L$**. \n\nIncreasing $C_L$ shifts the pole $\\omega_p$ and the oscillation frequency $\\omega_{\\text{osc}}$ to lower values, but it does **not** change the magnitude of the loop gain at the oscillation frequency.\n\n---\n\n### 2. Large-Signal / Time-Domain Perspective\n\nFrom a digital or transient perspective:\n* An odd number of inverted stages cannot settle into a stable DC equilibrium state because any small perturbation will drive the circuit away from the mid-rail operating point.\n* As $C_L$ increases, the RC time constant required to charge and discharge each output node increases ($\\tau = R_{\\text{out}} C_L$).\n* The delay per stage increases proportionally with $C_L$, making the period of oscillation $T \\propto C_L$. The waveform transitions from a high-frequency sine-like wave into a lower-frequency, sharp-switching square wave.\n\n---\n\n### Conclusion\nMaking $C_L$ arbitrarily large **slows down** the oscillation ($\\omega_{\\text{osc}} \\to 0$), but it **does not prevent** the circuit from oscillating.",
        "format": "markdown",
        "sha256": "a364d4524d2f99cd395d6c306c6e8e93601b69a3bf54ac91450acdecd090bde8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors lower the oscillation frequency without stopping oscillation. The small-signal phase and gain analysis correctly gives the 60° per-stage condition and a required stage gain independent of capacitance.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2661,
        "total_tokens": 3771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1857,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2661,
        "total_tokens": 3771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1857,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the load capacitances $C_L$ in a 3-stage ring oscillator are **doubled** ($C_L \\to 2C_L$), the phase noise at a fixed offset frequency **decreases by a factor of 4 (improves by 6 dB)**, while the oscillation frequency is **halved**.\n\n---\n\n### Step-by-Step Derivation\n\n#### 1. Effect on Oscillation Frequency ($f_0$)\nThe delay of each inverter stage is directly proportional to the load capacitance:\n$$\\tau_d \\propto C_L$$\n\nThe oscillation period $T_0$ for an $N$-stage ring oscillator ($N=3$) is:\n$$T_0 = 2N \\tau_d \\propto C_L$$\n\nSince frequency $f_0 = \\frac{1}{T_0}$:\n$$\\text{Doubling } C_L \\implies f_0 \\to \\frac{f_0}{2} \\quad (\\text{frequency is halved})$$\n\n---\n\n#### 2. Effect on Timing Jitter ($\\sigma_T^2$)\n* **Node Noise Power:** The total integrated thermal voltage noise at each node is:\n  $$\\overline{v_n^2} = \\frac{kT}{C_L}$$\n\n* **Slew Rate ($S$):** The charging/discharging rate at the threshold voltage is:\n  $$S = \\frac{dV}{dt} = \\frac{I}{C_L}$$\n\n* **Timing Jitter per Transition ($\\sigma_{\\Delta t}^2$):** \n  $$\\sigma_{\\Delta t}^2 = \\frac{\\overline{v_n^2}}{S^2} = \\frac{kT / C_L}{(I / C_L)^2} = \\frac{kT \\cdot C_L}{I^2} \\propto C_L$$\n\n* **Total Jitter Variance per Period ($\\sigma_T^2$):** With $2N$ transitions per period:\n  $$\\sigma_T^2 = 2N \\cdot \\sigma_{\\Delta t}^2 \\propto C_L$$\n\n* **Jitter-to-Period Ratio ($\\frac{\\sigma_T^2}{T_0}$):**\n  $$\\frac{\\sigma_T^2}{T_0} \\propto \\frac{C_L}{C_L} = \\text{constant (independent of } C_L\\text{)}$$\n\n---\n\n#### 3. Effect on Phase Noise ($\\mathcal{L}$)\n\nThe single-sideband phase noise at a fixed offset frequency $\\Delta f$ from the carrier is given by:\n$$\\mathcal{L}(\\Delta f) = \\frac{f_0^2}{2 \\Delta f^2} \\left( \\frac{\\sigma_T^2}{T_0} \\right)$$\n\nSince $\\frac{\\sigma_T^2}{T_0}$ is independent of $C_L$, phase noise depends directly on $f_0^2$:\n$$\\mathcal{L}(\\Delta f) \\propto f_0^2 \\propto \\frac{1}{C_L^2}$$\n\nWhen $C_L$ is doubled:\n1. **At a fixed offset frequency ($\\Delta f$):** \n   $$\\mathcal{L}'(\\Delta f) = \\frac{\\mathcal{L}(\\Delta f)}{4} \\quad \\implies \\mathbf{6\\text{ dB improvement (reduction)}}$$\n\n2. **At a relative offset frequency ($\\Delta f / f_0$):**\n   $$\\mathcal{L}\\left(\\frac{\\Delta f}{f_0}\\right) = \\text{Unchanged}$$",
        "format": "markdown",
        "sha256": "0d53c8fcf30796017da8cce6a9f40be19d9e2f8bf102969f3633738d9eb77093"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by a factor of four (6 dB) at a fixed offset; it also correctly notes the unchanged result at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 7837,
        "total_tokens": 8946,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7047,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 7837,
        "total_tokens": 8946,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7047,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the three load capacitors ($C_\\text{L}$) in a three-stage ring oscillator are **doubled** ($C_\\text{L} \\to 2C_\\text{L}$), the phase noise **decreases by 6 dB (improves by a factor of 4)** at a fixed offset frequency $\\Delta f$.\n\n---\n\n### 1. Effect on Oscillation Frequency ($f_0$)\nThe period of a ring oscillator with $N$ stages is determined by the charging and discharging time constant $\\tau \\approx R_\\text{out} C_\\text{L}$ of each node:\n\n$$T_0 = 2 N \\tau \\propto C_\\text{L}$$\n\n$$f_0 = \\frac{1}{T_0} \\propto \\frac{1}{C_\\text{L}}$$\n\n* **Result:** Doubling $C_\\text{L}$ **halves the oscillation frequency** ($f_0 \\to \\frac{f_0}{2}$).\n\n---\n\n### 2. Effect on Phase Noise at a Fixed Offset Frequency ($\\Delta f$)\n\n#### Method A: Hajimiri’s Impulse Sensitivity Function (ISF) Model\nAccording to Hajimiri’s phase noise model for ring oscillators, the single-sideband phase noise at an offset frequency $\\Delta f$ is given by:\n\n$$\\mathcal{L}(\\Delta f) = \\frac{\\Gamma_\\text{rms}^2}{8 \\pi^2 \\Delta f^2} \\cdot \\frac{\\overline{i_n^2} / \\Delta f}{q_\\text{max}^2}$$\n\nwhere:\n* $q_\\text{max} = C_\\text{L} V_\\text{DD}$ is the maximum charge swing at each node.\n* $\\overline{i_n^2}/\\Delta f$ is the current noise density of the transistors (remains constant if transistor sizes are unchanged).\n* $\\Gamma_\\text{rms}$ is the RMS impulse sensitivity function (remains constant).\n\nSubstituting $q_\\text{max} \\propto C_\\text{L}$:\n\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{1}{q_\\text{max}^2} \\propto \\frac{1}{C_\\text{L}^2}$$\n\nWhen $C_\\text{L}$ is doubled ($2C_\\text{L}$):\n$$\\mathcal{L}'(\\Delta f) \\propto \\frac{1}{(2C_\\text{L})^2} = \\frac{1}{4 C_\\text{L}^2} = \\frac{1}{4} \\mathcal{L}(\\Delta f)$$\n\nIn decibels:\n$$10 \\log_{10}\\left(\\frac{1}{4}\\right) \\approx -6\\text{ dB}$$\n\n---\n\n#### Method B: Time-Domain Noise & Jitter Derivation\n1. **Voltage Noise Variance:** $\\sigma_v^2 \\propto \\frac{kT}{C_\\text{L}}$\n2. **Slew Rate (Slope):** $S = \\frac{dV}{dt} \\propto \\frac{I}{C_\\text{L}} \\propto \\frac{1}{C_\\text{L}}$\n3. **Timing Jitter Variance per Transition:** \n   $$\\sigma_t^2 = \\frac{\\sigma_v^2}{S^2} \\propto \\frac{1/C_\\text{L}}{(1/C_\\text{L})^2} = C_\\text{L}$$\n4. **Period Jitter Variance:** $\\sigma_{T_0}^2 = 2N \\sigma_t^2 \\propto C_\\text{L}$\n5. **Phase Noise Spectrum:**\n   $$\\mathcal{L}(\\Delta f) \\propto f_0^3 \\sigma_{T_0}^2 \\propto \\left(\\frac{1}{C_\\text{L}}\\right)^3 \\cdot C_\\text{L} = \\frac{1}{C_\\text{L}^2}$$\n\nDoubling $C_\\text{L}$ reduces $\\mathcal{L}(\\Delta f)$ by a factor of 4 (**-6 dB**).\n\n---\n\n### Summary\n\n| Parameter | Original | Capacitors Doubled ($2C_\\text{L}$) | Change |\n| :--- | :--- | :--- | :--- |\n| **Oscillation Frequency ($f_0$)** | $f_0$ | $f_0 / 2$ | **Halved** (-50%) |\n| **Phase Noise at Fixed Offset $\\Delta f$** | $\\mathcal{L}(\\Delta f)$ | $\\mathcal{L}(\\Delta f) / 4$ | **Improved by 6 dB** (-6 dBc/Hz) |\n| **Phase Noise at Fractional Offset ($\\frac{\\Delta f}{f_0}$)** | $\\mathcal{L}_\\text{rel}$ | $\\mathcal{L}_\\text{rel}$ | **Unchanged** |\n| **Relative Period Jitter ($\\frac{\\sigma_{T_0}}{T_0}$)** | $\\frac{\\sigma_{T_0}}{T_0}$ | $\\frac{1}{\\sqrt{2}} \\frac{\\sigma_{T_0}}{T_0}$ | **Improved by 3 dB** |",
        "format": "markdown",
        "sha256": "ed4548cfeca2a60c2b3c9a5a7d0a4c6a530e5e49e6c1435525a81d031ed322d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling the capacitors halves the oscillation frequency and reduces phase noise by about 6 dB (a factor of four) at a fixed offset, with supporting charge, slew-rate, and timing-noise reasoning. It also correctly notes the unchanged result at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 6113,
        "total_tokens": 7222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 6113,
        "total_tokens": 7222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When all three load capacitors $C_\\text{L}$ in the ring oscillator are doubled ($C_\\text{L} \\to 2C_\\text{L}$), the **phase noise at a fixed offset frequency $\\Delta f$ decreases by 6 dB** (improves by a factor of 4). \n\nBelow is the step-by-step physical and mathematical derivation:\n\n---\n\n### 1. Effect on Oscillation Frequency ($f_0$)\nThe period of oscillation for an $N$-stage ring oscillator is:\n$$T_0 = 2N t_d$$\n\nwhere $t_d$ is the propagation delay per stage. The delay is directly proportional to the load capacitance:\n$$t_d \\propto \\frac{C_\\text{L} V_{\\text{DD}}}{I}$$\n\nThus, doubling $C_\\text{L}$ doubles the delay $t_d$, doubling the period $T_0$, which **halves the oscillation frequency**:\n$$f_0 \\propto \\frac{1}{C_\\text{L}} \\implies f_0' = \\frac{f_0}{2}$$\n\n---\n\n### 2. Effect on Timing Jitter ($\\sigma_T^2$)\nDuring an inverter transition, the thermal noise voltage variance at the output node is:\n$$\\sigma_v^2 \\propto \\frac{kT}{C_\\text{L}}$$\n\nThe voltage slew rate (slope) at the threshold crossing is:\n$$\\text{Slope} = \\frac{dV}{dt} \\propto \\frac{I}{C_\\text{L}}$$\n\nThe timing jitter per stage transition $\\sigma_{t,\\text{stage}}$ is:\n$$\\sigma_{t,\\text{stage}} = \\frac{\\sigma_v}{\\text{Slope}} \\propto \\frac{\\sqrt{kT / C_\\text{L}}}{I / C_\\text{L}} \\propto \\frac{\\sqrt{kT C_\\text{L}}}{I}$$\n\nThe period jitter variance $\\sigma_T^2$ accumulated over one full cycle is the sum of variances of all transitions:\n$$\\sigma_T^2 \\propto C_\\text{L}$$\n\nDoubling $C_\\text{L}$ **doubles the period jitter variance** ($\\sigma_T'^2 = 2\\sigma_T^2$).\n\n---\n\n### 3. Effect on Phase Noise ($\\mathcal{L}(\\Delta f)$)\n\n#### A. At a Fixed Absolute Offset Frequency ($\\Delta f$)\nThe single-sideband phase noise in the $1/f^2$ region at an offset frequency $\\Delta f$ from the carrier is given by:\n$$\\mathcal{L}(\\Delta f) = \\frac{2\\pi^2 f_0^3 \\sigma_T^2}{\\Delta f^2}$$\n\nSubstituting the dependencies on $C_\\text{L}$:\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{(1/C_\\text{L})^3 \\cdot C_\\text{L}}{\\Delta f^2} \\propto \\frac{1}{C_\\text{L}^2}$$\n\nWhen $C_\\text{L}$ is doubled:\n$$\\mathcal{L}'(\\Delta f) = \\frac{\\mathcal{L}(\\Delta f)}{2^2} = \\frac{1}{4}\\mathcal{L}(\\Delta f)$$\n\nIn decibels:\n$$\\Delta \\mathcal{L}_{\\text{dB}} = 10 \\log_{10}\\left(\\frac{1}{4}\\right) \\approx -6\\text{ dB}$$\n\n> **Conclusion:** At a given offset frequency $\\Delta f$, **the phase noise is reduced by 6 dB** (improves by 4$\\times$).\n\n---\n\n#### B. At a Fixed Relative Offset Frequency ($\\Delta f / f_0$)\nIf the phase noise is evaluated at a constant relative offset from the carrier (i.e., $\\frac{\\Delta f}{f_0} = \\text{constant}$):\n$$\\mathcal{L}\\left(\\frac{\\Delta f}{f_0}\\right) = \\frac{2\\pi^2 f_0 \\sigma_T^2}{(\\Delta f / f_0)^2} \\propto f_0 \\cdot \\sigma_T^2 \\propto \\frac{1}{C_\\text{L}} \\cdot C_\\text{L} = \\text{constant}$$\n\n> **Conclusion:** At a fixed relative offset frequency, **the phase noise remains unchanged**.",
        "format": "markdown",
        "sha256": "dbda4ea8b6c379d08f15e9842ec53a440438496ca5667ec6cf12c2488502bfe0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling the capacitors halves the oscillation frequency and reduces phase noise by about 6 dB (a factor of four) at a fixed offset. Its jitter-based scaling supports that result, and it correctly notes the unchanged phase noise at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 5301,
        "total_tokens": 6410,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 5301,
        "total_tokens": 6410,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, the circuit will fail to oscillate if $C_L$ becomes arbitrarily large. \n\nThis can be proven using both **small-signal analysis (Barkhausen stability criterion)** and **large-signal dynamical analysis**.\n\n---\n\n### 1. Small-Signal Analysis (Barkhausen Criterion)\n\nLet each inverter have a low-frequency gain of $-A_0$ ($A_0 > 1$) and an output resistance of $R_0$. \n- The capacitance at the output of the first inverter is dominated by $C_L$, creating a pole at $\\omega_{p1} = \\frac{1}{R_0 C_L}$.\n- The other two nodes have parasitic capacitances $C_0 \\ll C_L$, creating poles at higher frequencies $\\omega_0 = \\frac{1}{R_0 C_0}$.\n\nThe open-loop transfer function of the 3-stage ring is:\n$$H(s) = \\frac{-A_0^3}{\\left(1 + \\frac{s}{\\omega_{p1}}\\right)\\left(1 + \\frac{s}{\\omega_0}\\right)^2}$$\n\nFor oscillation to start, the Barkhausen criteria must be satisfied:\n1. **Phase Condition:** The phase shift introduced by the poles must equal $-180^\\circ$ at the oscillation frequency $\\omega_{\\text{osc}}$:\n   $$\\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_{p1}}\\right) + 2\\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 180^\\circ$$\n\n2. **Gain Condition:** The magnitude of the loop gain at $\\omega_{\\text{osc}}$ must be greater than or equal to 1 ($|H(j\\omega_{\\text{osc}})| \\ge 1$).\n\n#### Evaluating as $C_L \\to \\infty$:\nAs $C_L$ becomes arbitrarily large, $\\omega_{p1} \\to 0$. For any non-zero frequency $\\omega_{\\text{osc}}$, $\\frac{\\omega_{\\text{osc}}}{\\omega_{p1}} \\to \\infty$, so:\n$$\\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_{p1}}\\right) \\to 90^\\circ$$\n\nSubstituting this into the phase condition:\n$$90^\\circ + 2\\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 180^\\circ \\implies \\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 45^\\circ \\implies \\omega_{\\text{osc}} \\approx \\omega_0$$\n\nNow, evaluate the magnitude of the loop gain at $\\omega_{\\text{osc}} \\approx \\omega_0$:\n$$|H(j\\omega_{\\text{osc}})| = \\frac{A_0^3}{\\sqrt{1 + \\left(\\frac{\\omega_0}{\\omega_{p1}}\\right)^2} \\left[1 + \\left(\\frac{\\omega_0}{\\omega_0}\\right)^2\\right]} \\approx \\frac{A_0^3}{2 \\left(\\frac{\\omega_0}{\\omega_{p1}}\\right)} = \\frac{A_0^3 \\cdot \\omega_{p1}}{2 \\omega_0}$$\n\nSince $\\omega_{p1} \\propto \\frac{1}{C_L}$, as $C_L \\to \\infty$, $\\omega_{p1} \\to 0$, causing:\n$$\\lim_{C_L \\to \\infty} |H(j\\omega_{\\text{osc}})| = 0$$\n\nBecause the magnitude of the loop gain falls below 1, small perturbations around the DC operating point cannot grow, and **the circuit fails to oscillate**.\n\n---\n\n### 2. Large-Signal / Time-Domain Intuition\n\nAs $C_L \\to \\infty$, the voltage at node 1 ($V_1$) changes extremely slowly compared to nodes 2 and 3. \n\n1. Because inverters 2 and 3 operate much faster than node 1, they act quasi-statically as a fast, non-inverting cascade buffer. The voltage feeding back to the input of inverter 1 is:\n   $$V_3 = f_{23}(V_1)$$\n   where $f_{23}$ is a **monotonically increasing** function (since two inverters in series yield positive gain).\n\n2. Inverter 1 charges and discharges $C_L$ with a current $I_1(V_3)$. Because inverter 1 is inverting, $I_1(V_3)$ is a **monotonically decreasing** function of $V_3$.\n\n3. Combining these, the rate of change of $V_1$ is governed by:\n   $$\\frac{dV_1}{dt} = \\frac{1}{C_L} I_1(f_{23}(V_1)) = g(V_1)$$\n\nSince $g(V_1)$ is a strictly decreasing function of $V_1$ ($g'(V_1) < 0$), the circuit reduces to a **1st-order continuous system with negative feedback**. By fundamental dynamical systems theory (and the Poincaré–Bendixson theorem), a continuous 1D autonomous system **cannot oscillate**; it will simply settle smoothly to its unique, stable equilibrium DC operating point.",
        "format": "markdown",
        "sha256": "ab9369ca27dabf4226897baa923409e2078400311323bd1bb40f50302870ead6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading on one node creates a dominant pole, pushing the loop gain below unity at the phase-crossover frequency and preventing oscillation. The extra time-domain explanation is consistent with the golden solution; minor modeling simplifications do not change the conclusion.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 5296,
        "total_tokens": 6404,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4117,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 5296,
        "total_tokens": 6404,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4117,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit will fail to oscillate if $C_L$ becomes arbitrarily large.**\n\n---\n\n### **Detailed Analysis**\n\n#### **1. Small-Signal Analysis (Barkhausen Criterion)**\nFor a 3-stage inverter ring to oscillate, the small-signal loop gain $H(s)$ must satisfy Barkhausen’s criterion at some frequency $\\omega_x$:\n1. **Phase Criterion:** The total phase shift around the loop must be an integer multiple of $360^\\circ$. Since three inverting stages provide a DC phase shift of $180^\\circ$ (or $-180^\\circ$), the three frequency-dependent poles must contribute an **additional $-180^\\circ$ phase shift**:\n   $$\\theta_1(\\omega_x) + \\theta_2(\\omega_x) + \\theta_3(\\omega_x) = -180^\\circ$$\n\n2. **Gain Criterion:** The loop gain magnitude at $\\omega_x$ must be greater than or equal to unity:\n   $$|H(j\\omega_x)| \\ge 1$$\n\n---\n\n#### **2. Effect of an Arbitrarily Large $C_L$**\nLet the three stage pole frequencies be:\n$$\\omega_{p1} = \\frac{1}{R_{out1} C_L}, \\quad \\omega_{p2} = \\frac{1}{R_{out2} C_2}, \\quad \\omega_{p3} = \\frac{1}{R_{out3} C_3}$$\n\nAs $C_L \\to \\infty$, the first pole moves toward zero ($\\omega_{p1} \\to 0$).\n\n* **Finding the Phase Crossover Frequency ($\\omega_x$):**\n  A single real pole can contribute a maximum phase shift of $-90^\\circ$ as $\\omega \\to \\infty$. \n  \n  Since $\\omega_{p1} \\ll \\omega_{p2}, \\omega_{p3}$, at any frequency near $\\omega_{p2}$ or $\\omega_{p3}$, the phase contribution of the first pole is saturated at its maximum:\n  $$\\theta_1(\\omega_x) = -\\arctan\\left(\\frac{\\omega_x}{\\omega_{p1}}\\right) \\approx -90^\\circ$$\n  \n  To reach the required total phase shift of $-180^\\circ$, the remaining two poles must contribute the other $-90^\\circ$:\n  $$\\theta_2(\\omega_x) + \\theta_3(\\omega_x) = -90^\\circ$$\n  \n  This fixes the phase crossover frequency $\\omega_x$ at a **finite, non-zero value** determined strictly by $\\omega_{p2}$ and $\\omega_{p3}$ (for identical un-loaded stages, $\\omega_x = \\omega_{p2} = \\omega_{p3}$).\n\n* **Evaluating the Gain at $\\omega_x$:**\n  The overall loop gain magnitude at $\\omega_x$ is:\n  $$|H(j\\omega_x)| = \\frac{A_1}{\\sqrt{1 + (\\omega_x / \\omega_{p1})^2}} \\cdot \\frac{A_2}{\\sqrt{1 + (\\omega_x / \\omega_{p2})^2}} \\cdot \\frac{A_3}{\\sqrt{1 + (\\omega_x / \\omega_{p3})^2}}$$\n\n  Since $\\omega_{p1} \\to 0$, the term $\\sqrt{1 + (\\omega_x / \\omega_{p1})^2} \\approx \\frac{\\omega_x}{\\omega_{p1}} \\propto C_L$. \n  \n  Therefore:\n  $$|H(j\\omega_x)| \\propto \\frac{1}{C_L} \\to 0 \\quad \\text{as } C_L \\to \\infty$$\n\nSince $|H(j\\omega_x)|$ drops below $1$, the gain condition for oscillation is violated.\n\n---\n\n### **Intuitive Summary**\nFor the oscillator to start up, small thermal noise around the DC operating point must grow exponentially. \n\nBy adding a very large $C_L$, stage 1 becomes a **dominant pole**. This turns the 3-stage loop into an effectively 1-pole dominant system over low frequencies. Such negative-feedback systems are unconditionally stable: any disturbance at the DC bias point gets strongly damped out rather than amplified, causing the circuit to remain trapped at its stable DC bias voltage without oscillating.",
        "format": "markdown",
        "sha256": "63a548abea8456501e3789d4dbcd09d1ce67114167eec6d6710acccf909ff81b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large capacitance on one node creates a dominant pole, causing loop gain at the phase condition to fall below unity and preventing oscillation. The detailed phase and DC-settling discussion is consistent with the essential explanation.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 4487,
        "total_tokens": 5595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3506,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 4487,
        "total_tokens": 5595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3506,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit fails to oscillate if $C_L$ becomes arbitrarily large.**\n\n---\n\n### **Detailed Analysis**\n\n#### **1. Small-Signal Analysis (Barkhausen Criterion)**\n\nTo initiate oscillations, a ring oscillator must satisfy the **Barkhausen criteria** for small signals:\n1. **Phase condition:** The open-loop phase shift must be $180^\\circ$ (or $360^\\circ$ including DC negative feedback) at some frequency $\\omega_x$.\n2. **Gain condition:** The open-loop magnitude at $\\omega_x$ must be greater than or equal to unity: $|H(j\\omega_x)| \\ge 1$.\n\nEach inverter can be modeled as a gain stage with small-signal voltage gain $-A_0$ and a single pole.\n\n* **Stage 1** (loaded with $C_L$): Has a dominant low-frequency pole at $\\omega_{p1} = \\frac{1}{R_{out1} C_L}$.\n* **Stages 2 & 3**: Have high-frequency poles at $\\omega_{p2}$ and $\\omega_{p3}$ due to intrinsic parasitic capacitances.\n\nThe open-loop transfer function is:\n$$H(s) = -\\frac{A_0^3}{\\left(1 + \\frac{s}{\\omega_{p1}}\\right)\\left(1 + \\frac{s}{\\omega_{p2}}\\right)\\left(1 + \\frac{s}{\\omega_{p3}}\\right)}$$\n\n---\n\n#### **2. Phase Crossover Frequency ($\\omega_x$)**\n\nFor total phase shift to reach $-180^\\circ$ (excluding the DC negative sign):\n$$\\arctan\\left(\\frac{\\omega_x}{\\omega_{p1}}\\right) + \\arctan\\left(\\frac{\\omega_x}{\\omega_{p2}}\\right) + \\arctan\\left(\\frac{\\omega_x}{\\omega_{p3}}\\right) = 180^\\circ$$\n\nAs $C_L \\to \\infty$, the pole frequency $\\omega_{p1} \\to 0$. For any non-zero frequency $\\omega_x$, $\\frac{\\omega_x}{\\omega_{p1}} \\to \\infty$, so:\n$$\\arctan\\left(\\frac{\\omega_x}{\\omega_{p1}}\\right) \\approx 90^\\circ$$\n\nSubstituting this back into the phase equation:\n$$90^\\circ + \\arctan\\left(\\frac{\\omega_x}{\\omega_{p2}}\\right) + \\arctan\\left(\\frac{\\omega_x}{\\omega_{p3}}\\right) = 180^\\circ$$\n$$\\arctan\\left(\\frac{\\omega_x}{\\omega_{p2}}\\right) + \\arctan\\left(\\frac{\\omega_x}{\\omega_{p3}}\\right) = 90^\\circ$$\n\nAssuming identical remaining stages ($\\omega_{p2} = \\omega_{p3} = \\omega_0$):\n$$2 \\arctan\\left(\\frac{\\omega_x}{\\omega_0}\\right) = 90^\\circ \\implies \\omega_x = \\omega_0$$\n\nNotice that **$\\omega_x$ remains a fixed, non-zero frequency** ($\\omega_x = \\omega_0$) even as $C_L \\to \\infty$.\n\n---\n\n#### **3. Loop Gain Magnitude at $\\omega_x$**\n\nEvaluating the loop gain magnitude at $\\omega_x$:\n$$|H(j\\omega_x)| = \\frac{A_0^3}{\\sqrt{1 + \\left(\\frac{\\omega_x}{\\omega_{p1}}\\right)^2} \\cdot \\sqrt{1 + \\left(\\frac{\\omega_x}{\\omega_{p2}}\\right)^2} \\cdot \\sqrt{1 + \\left(\\frac{\\omega_x}{\\omega_{p3}}\\right)^2}}$$\n\nSince $\\omega_x \\gg \\omega_{p1}$:\n$$\\sqrt{1 + \\left(\\frac{\\omega_x}{\\omega_{p1}}\\right)^2} \\approx \\frac{\\omega_x}{\\omega_{p1}} = \\omega_x R_{out1} C_L$$\n\nThus:\n$$|H(j\\omega_x)| \\approx \\frac{A_0^3}{(\\omega_x R_{out1} C_L) \\cdot \\sqrt{2} \\cdot \\sqrt{2}} = \\frac{A_0^3}{2 \\, \\omega_x R_{out1} C_L}$$\n\nAs $C_L \\to \\infty$, the loop gain magnitude drops inversely with $C_L$:\n$$\\lim_{C_L \\to \\infty} |H(j\\omega_x)| = 0$$\n\n---\n\n### **Conclusion**\n\nBecause $|H(j\\omega_x)| < 1$ for a sufficiently large $C_L$, the **Barkhausen gain criterion is violated**. \n\nThe closed-loop poles move into the stable left-half of the $s$-plane. The circuit acts like a single-pole dominant system with negative feedback, causing it to remain statically stable at its DC operating point ($V_{DD}/2$) without starting to oscillate.",
        "format": "markdown",
        "sha256": "6d46d40cea0f8faef13fe53cbaf79b8478d1df53494692e4dee83eff43d1b734"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the capacitor on one node creates a dominant low-frequency pole, making loop gain fall below unity at the phase-crossover frequency as CL grows. This supports the conclusion that oscillation eventually fails; the simplified phase model and DC-settling detail do not undermine the essential answer.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 4419,
        "total_tokens": 5527,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3291,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 4419,
        "total_tokens": 5527,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3291,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the width ($W$) of all NMOS and PMOS devices in a ring oscillator is doubled, the **phase noise decreases by half (improves by $3\\text{ dB}$)**.\n\nHere is the step-by-step breakdown of why this happens:\n\n---\n\n### 1. Oscillation Frequency ($f_0$) Remains Unchanged\n* **Capacitance:** The total load capacitance ($C_L$) at each node is dominated by the gate and drain parasitic capacitances. Since $C_L \\propto W$, doubling the transistor widths doubles $C_L$ ($C_L \\to 2C_L$).\n* **Current / On-Resistance:** The drive current ($I_D$) doubles because $I_D \\propto W$, and the channel resistance ($R_{on}$) drops by half ($R_{on} \\to R_{on}/2$).\n* **Stage Delay ($\\tau$):** The propagation delay per stage is $\\tau \\propto R_{on} C_L \\propto \\frac{C_L V_{DD}}{I_D}$. Since both capacitance and current scale by 2, the delay $\\tau$ remains **constant**.\n* Therefore, the oscillation frequency $f_0 = \\frac{1}{2N\\tau}$ **does not change**.\n\n---\n\n### 2. Phase Noise Scaling\nPhase noise in a ring oscillator can be analyzed using either **Abidi’s formula** or **Hajimiri’s Impulse Sensitivity Function (ISF) model**:\n\n#### **Method A: Abidi's Formula**\n$$\\mathcal{L}(\\Delta f) = \\frac{8}{3 \\eta} N \\frac{k T \\gamma}{I_{SS}(V_{DD} - V_{TH})} \\left(\\frac{f_0}{\\Delta f}\\right)^2$$\n\n* Since $I_{SS} \\propto W$, doubling the transistor width doubles the bias current $I_{SS} \\to 2I_{SS}$.\n* Since $f_0$ and all voltage terms remain constant, $\\mathcal{L}(\\Delta f)$ is inversely proportional to $I_{SS}$:\n  $$\\mathcal{L}(\\Delta f) \\propto \\frac{1}{I_{SS}} \\implies \\mathcal{L}_{\\text{new}} = \\frac{1}{2}\\mathcal{L}_{\\text{old}} \\quad (-3\\text{ dB})$$\n\n#### **Method B: Hajimiri's ISF Model**\n$$\\mathcal{L}(\\Delta f) = \\frac{\\overline{i_n^2}/\\Delta f \\cdot \\Gamma_{\\text{rms}}^2}{8 \\pi^2 \\Delta f^2 q_{\\text{max}}^2}$$\n\n* **Noise Power ($\\overline{i_n^2}$):** Transconductance $g_m \\propto W$, so the thermal noise current spectral density $\\overline{i_n^2}/\\Delta f = 4k T \\gamma g_m$ **doubles** ($\\times 2$).\n* **Maximum Charge ($q_{\\text{max}}$):** $q_{\\text{max}} = C_L V_{DD} \\propto W$. Since $C_L$ doubles, $q_{\\text{max}}^2$ **quadruples** ($\\times 4$).\n* **ISF ($\\Gamma_{\\text{rms}}$):** Depends on the normalized shape of the output waveform, which stays the same.\n\nCombining these:\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{\\text{Noise Power}}{q_{\\text{max}}^2} \\propto \\frac{2}{4} = \\frac{1}{2} \\quad (-3\\text{ dB})$$\n\n---\n\n### Summary of Effects:\n| Parameter | Scaling Factor |\n| :--- | :--- |\n| **Transistor Width ($W$)** | $2\\times$ |\n| **Oscillation Frequency ($f_0$)** | **Unchanged ($1\\times$)** |\n| **Power Consumption ($P$)** | **Doubles ($2\\times$)** |\n| **Phase Noise ($\\mathcal{L}$)** | **Halved (Improves by $3\\text{ dB}$)** |",
        "format": "markdown",
        "sha256": "fbd33791f28f272476b6af90740fec5199fa55db3eaee4330b85d38718a3fb85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and supports it with the right scaling: device noise power doubles while signal charge squared increases fourfold. It also correctly notes that frequency stays approximately constant and power doubles.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3187,
        "total_tokens": 4304,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2282,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3187,
        "total_tokens": 4304,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2282,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If we double the widths ($W$) of all NMOS and PMOS transistors in this ring oscillator while keeping the supply voltage ($V_{DD}$) constant, the **phase noise decreases by a factor of 2 (improves by 3 dB)**.\n\nHere is the step-by-step physical and mathematical explanation:\n\n---\n\n### 1. Oscillation Frequency ($f_0$) Remains Constant\n* **Load Capacitance ($C_L$):** The total capacitance at each node is dominated by the gate and drain capacitances of the transistors. Doubling the width doubles this capacitance:  \n  $$C_L \\to 2 C_L$$\n* **Current ($I$):** Doubling the transistor widths doubles the drive current for the same supply voltage:  \n  $$I \\to 2 I$$\n* **Stage Delay ($\\tau_d$):** The delay per inverter stage is given by $\\tau_d \\approx \\frac{C_L V_{DD}}{I}$. Since both $C_L$ and $I$ scale by a factor of 2, the stage delay and the oscillation frequency remain unchanged:  \n  $$f_0 = \\frac{1}{2 N \\tau_d} \\quad \\text{(Unchanged)}$$\n\n---\n\n### 2. Effect on Thermal Noise Current\nThe thermal noise current spectral density of a transistor is proportional to its transconductance ($g_m$):\n$$\\frac{\\overline{i_n^2}}{\\Delta f} = 4 k T \\gamma g_m$$\n\nSince $g_m \\propto W$, doubling the transistor widths doubles the transconductance ($g_m \\to 2 g_m$), which causes the noise current spectral density to **double** (increase by a factor of 2).\n\n---\n\n### 3. Effect on Phase Noise ($\\mathcal{L}$)\nAccording to impulse sensitivity function (ISF) theory (Hajimiri's phase noise model), the phase noise in a ring oscillator is given by:\n\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{1}{\\Delta f^2} \\cdot \\frac{\\overline{i_n^2}/\\Delta f}{q_{\\text{max}}^2}$$\n\nWhere:\n* $q_{\\text{max}} = C_L V_{DD}$ is the maximum charge swing at each node. \n  Since $C_L \\to 2 C_L$, the stored charge doubles: $q_{\\text{max}} \\to 2 q_{\\text{max}}$, so $q_{\\text{max}}^2 \\to 4 q_{\\text{max}}^2$.\n* The noise current power $\\overline{i_n^2}/\\Delta f$ doubles (factor of 2).\n\nSubstituting these scaled values into the phase noise relationship:\n\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{2}{4} = \\frac{1}{2}$$\n\n---\n\n### Summary\n* **Phase Noise Power:** Halved ($\\frac{1}{2}$ of the original power).\n* **Decibel Change:** $10 \\log_{10}(0.5) \\approx \\mathbf{-3\\text{ dB}}$ (a 3 dB improvement).\n* **Trade-off:** This reduction in phase noise comes at the cost of **doubling the power consumption** of the circuit.",
        "format": "markdown",
        "sha256": "871e707e9944d2364b23ffa4c4cfefdadc88d0fa6b83d7c4f7d6f8a667a490e7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and supports it with the valid scaling: device noise current power doubles while node charge doubles, making the noise-to-signal ratio half. It also correctly notes the frequency remains about constant and power doubles.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 2649,
        "total_tokens": 3766,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1932,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 2649,
        "total_tokens": 3766,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1932,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When you double the widths ($W$) of all NMOS and PMOS transistors in a CMOS ring oscillator, the **phase noise decreases by 3 dB** (it improves by a factor of 2 in linear scale). \n\nHere is the step-by-step breakdown of why this happens:\n\n---\n\n### 1. Oscillation Frequency ($f_0$) Remains Unchanged\n* **Drive Capability:** Transistor transconductance $g_m$ and drive current $I_{D}$ double because $I_{D} \\propto W$. Consequently, the output resistance $R_{on} \\propto 1/W$ is halved.\n* **Capacitance:** The total load capacitance $C_L$ at each node (gate capacitance + drain parasitics) also doubles because $C_L \\propto W$.\n* **Stage Delay:** The delay per stage is $\\tau \\approx R_{on} C_L$. Since $R_{on}$ is halved and $C_L$ is doubled, the time constant $\\tau$ remains constant:\n  $$\\tau \\propto \\frac{1}{W} \\times W = \\text{constant}$$\nTherefore, the **oscillation frequency $f_0 = \\frac{1}{2N\\tau}$ does not change**.\n\n---\n\n### 2. Power Consumption ($P$) Doubles\nDynamic power consumption is given by:\n$$P = N \\cdot C_L \\cdot V_{DD}^2 \\cdot f_0$$\nSince $C_L$ doubles while $V_{DD}$ and $f_0$ remain constant, the total **power consumption doubles** (+3 dB).\n\n---\n\n### 3. Phase Noise ($\\mathcal{L}$) Decreases by 3 dB\nUsing Hajimiri’s Phase Noise Model (or Abidi’s model):\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{S_{i,n}}{q_{\\text{max}}^2}$$\n\n* **Noise Current Spectral Density ($S_{i,n}$):** The thermal noise current of a transistor is $S_{i,n} = 4kT\\gamma g_m$. Since $g_m \\propto W$, doubling the width **doubles** the noise current power ($2\\times$).\n* **Maximum Charge ($q_{\\text{max}}$):** The maximum signal charge stored per cycle is $q_{\\text{max}} = C_L \\cdot V_{DD}$. Since $C_L \\propto W$, doubling $W$ doubles $q_{\\text{max}}$, which **quadruples** $q_{\\text{max}}^2$ ($4\\times$).\n\nCombining these effects:\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{2 \\times S_{i,n}}{4 \\times q_{\\text{max}}^2} = \\frac{1}{2} \\mathcal{L}_{\\text{original}}$$\n\nAlternatively, ring oscillator phase noise is inversely proportional to power consumption at a fixed frequency:\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{1}{P}$$\nBecause the power consumption $P$ doubles, the phase noise is reduced to **half** of its original value.\n\n---\n\n### **Summary**\n* **Frequency ($f_0$):** Unchanged\n* **Power:** Doubles (+3 dB)\n* **Phase Noise ($\\mathcal{L}$):** **Decreases by 3 dB** (improves by $50\\%$)",
        "format": "markdown",
        "sha256": "9e248c5b2294a3c4016a8528048d6e1930bfe463bbe65d5d3d76a00982fe2f09"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling all device widths reduces phase noise by about 3 dB, with a sound scaling argument: noise current power doubles while signal charge doubles, giving a fourfold increase in charge squared. It also correctly notes that frequency stays roughly constant and power doubles.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3046,
        "total_tokens": 4163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2310,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3046,
        "total_tokens": 4163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2310,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the small-signal resistance $R_X$ looking into the supply node of the 3-stage CMOS ring oscillator, we analyze the circuit around its symmetric DC operating point.\n\n---\n\n### 1. Circuit & Small-Signal Setup\n\nLet the 3 CMOS inverter stages be indexed by $k \\in \\{1, 2, 3\\}$. \n- Each stage consists of a PMOS transistor ($M_{Pk}$) and an NMOS transistor ($M_{Nk}$).\n- The supply node is applied a small-signal test voltage $v_x$, drawing a total small-signal supply current $i_x$.\n- Let $v_1, v_2, v_3$ be the small-signal voltages at the outputs of stage 1, stage 2, and stage 3, respectively.\n- For a ring configuration:\n  - Input of stage 1 is $v_3$, output is $v_1$\n  - Input of stage 2 is $v_1$, output is $v_2$\n  - Input of stage 3 is $v_2$, output is $v_3$\n\nLet the small-signal transistor parameters for each identical stage be:\n- **PMOS:** Transconductance $g_{mp}$, output conductance $g_{op} = 1/r_{op}$\n- **NMOS:** Transconductance $g_{mn}$, output conductance $g_{on} = 1/r_{on}$\n\n---\n\n### 2. Node Equations (KCL)\n\nFor any stage $k$ (with input $v_{in,k}$ and output $v_{out,k}$):\n- Small-signal current entering through PMOS source:\n  $$i_{p,k} = g_{mp}(v_x - v_{in,k}) + g_{op}(v_x - v_{out,k})$$\n\n- Small-signal current leaving through NMOS to ground:\n  $$i_{n,k} = g_{mn}v_{in,k} + g_{on}v_{out,k}$$\n\nSince the gate of a MOSFET draws zero low-frequency current, KCL at each output node requires that the PMOS current equals the NMOS current:\n$$i_{p,k} = i_{n,k}$$\n\n$$g_{mp}(v_x - v_{in,k}) + g_{op}(v_x - v_{out,k}) = g_{mn}v_{in,k} + g_{on}v_{out,k}$$\n\nRearranging the terms:\n$$(g_{mn} + g_{mp}) v_{in,k} + (g_{on} + g_{op}) v_{out,k} = (g_{mp} + g_{op}) v_x$$\n\nWriting this system of equations for the 3 stages:\n1. $(g_{mn} + g_{mp}) v_3 + (g_{on} + g_{op}) v_1 = (g_{mp} + g_{op}) v_x$\n2. $(g_{mn} + g_{mp}) v_1 + (g_{on} + g_{op}) v_2 = (g_{mp} + g_{op}) v_x$\n3. $(g_{mn} + g_{mp}) v_2 + (g_{on} + g_{op}) v_3 = (g_{mp} + g_{op}) v_x$\n\n---\n\n### 3. Solving for Internal Node Voltages\n\nDue to the cyclic symmetry of the ring oscillator at the bias point:\n$$v_1 = v_2 = v_3 = v$$\n\nSubstituting $v$ into any of the three equations:\n$$(g_{mn} + g_{mp}) v + (g_{on} + g_{op}) v = (g_{mp} + g_{op}) v_x$$\n\n$$(g_{mn} + g_{mp} + g_{on} + g_{op}) v = (g_{mp} + g_{op}) v_x$$\n\n$$v = \\frac{g_{mp} + g_{op}}{g_{mn} + g_{mp} + g_{on} + g_{op}} \\, v_x$$\n\n---\n\n### 4. Supply Current and Resistance $R_X$\n\nThe total current $i_x$ drawn from the supply node is the sum of the currents into the three PMOS sources:\n$$i_x = \\sum_{k=1}^{3} i_{p,k} = \\sum_{k=1}^{3} i_{n,k} = 3(g_{mn} + g_{on}) v$$\n\nSubstituting the expression for $v$:\n$$i_x = 3 (g_{mn} + g_{on}) \\frac{g_{mp} + g_{op}}{g_{mn} + g_{mp} + g_{on} + g_{op}} \\, v_x$$\n\nThe small-signal resistance $R_X = \\frac{v_x}{i_x}$ is therefore:\n\n$$R_X = \\frac{g_{mn} + g_{mp} + g_{on} + g_{op}}{3(g_{mp} + g_{op})(g_{mn} + g_{on})}$$\n\n---\n\n### Special / Simplified Cases\n\n1. **Neglecting channel-length modulation ($r_{on}, r_{op} \\to \\infty \\implies g_{on} = g_{op} = 0$):**\n   $$R_X \\approx \\frac{g_{mn} + g_{mp}}{3 g_{mp} g_{mn}} = \\frac{1}{3} \\left( \\frac{1}{g_{mp}} + \\frac{1}{g_{mn}} \\right)$$\n\n2. **Generalization for an $N$-stage ring oscillator ($N$ being an odd integer):**\n   $$R_X = \\frac{g_{mn} + g_{mp} + g_{on} + g_{op}}{N(g_{mp} + g_{op})(g_{mn} + g_{on})}$$",
        "format": "markdown",
        "sha256": "4741cab7ff9af80717328bffdd38cf5c9a5a443888be601a6015dfe8a4ffeab7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer analyzes only a static symmetric operating point and derives a gm-based resistance, missing the dominant oscillation-driven charging and discharging of the load capacitances.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1113,
        "output_tokens": 8941,
        "total_tokens": 10054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7599,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1113,
        "output_tokens": 8941,
        "total_tokens": 10054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7599,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the small-signal resistance $R_X$ seen looking into the supply node of the 3-stage ring oscillator, we can perform a small-signal analysis using the symmetry of the circuit.\n\n---\n\n### **1. Symmetry Analysis**\n\nLet a small-signal voltage $v_x$ be applied at the supply node. Let the small-signal output voltages of the three inverter stages be $v_1$, $v_2$, and $v_3$, respectively.\n\nFor each stage $i$ ($i = 1, 2, 3$), the input to the stage is $v_{i-1}$ (with $v_0 = v_3$). \n\nUsing KCL at output node $v_i$:\n- The small-signal current entering node $v_i$ from the supply $v_x$ via the PMOS transistor is:\n  $$i_{p,i} = g_{mp}(v_x - v_{i-1}) + \\frac{v_x - v_i}{r_{op}}$$\n\n- The small-signal current leaving node $v_i$ to ground via the NMOS transistor is:\n  $$i_{n,i} = g_{mn} v_{i-1} + \\frac{v_i}{r_{on}}$$\n\nSetting $i_{p,i} = i_{n,i}$:\n$$g_{mp}(v_x - v_{i-1}) + \\frac{v_x - v_i}{r_{op}} = g_{mn} v_{i-1} + \\frac{v_i}{r_{on}}$$\n\nRearranging terms:\n$$\\left( \\frac{1}{r_{op}} + \\frac{1}{r_{on}} \\right) v_i + (g_{mp} + g_{mn}) v_{i-1} = \\left( g_{mp} + \\frac{1}{r_{op}} \\right) v_x$$\n\nBecause all 3 stages are identical and connected in a symmetric loop:\n$$v_1 = v_2 = v_3 = v$$\n\n---\n\n### **2. Equivalent Circuit of Each Stage**\n\nSince $v_1 = v_2 = v_3 = v$, the gate of each transistor is at the same small-signal potential $v$ as its drain ($v_{gate} = v_{drain} = v$):\n\n1. **PMOS Transistor ($M_p$):** \n   - Source is connected to supply ($v_x$), gate and drain are both at $v$.\n   - Since $v_{sg} = v_{sd} = v_x - v$, the PMOS transistor behaves as a **diode-connected device** connected between $v_x$ and node $v$.\n   - Its small-signal resistance is:\n     $$R_p = \\frac{1}{g_{mp} + \\frac{1}{r_{op}}}$$\n\n2. **NMOS Transistor ($M_n$):** \n   - Source is at ground ($0$), gate and drain are both at $v$.\n   - Since $v_{gs} = v_{ds} = v$, the NMOS transistor behaves as a **diode-connected device** connected between node $v$ and ground.\n   - Its small-signal resistance is:\n     $$R_n = \\frac{1}{g_{mn} + \\frac{1}{r_{on}}}$$\n\nThe total small-signal resistance of a **single inverter stage** connected between the supply $v_x$ and ground is the series combination of $R_p$ and $R_n$:\n$$R_{\\text{stage}} = R_p + R_n = \\frac{1}{g_{mp} + \\frac{1}{r_{op}}} + \\frac{1}{g_{mn} + \\frac{1}{r_{on}}}$$\n\n---\n\n### **3. Small-Signal Supply Resistance $R_X$**\n\nThe supply node connects all **3 identical inverter stages in parallel**. Therefore, the total resistance $R_X$ seen looking into the supply node is:\n\n$$R_X = \\frac{R_{\\text{stage}}}{3} = \\frac{1}{3} \\left( \\frac{1}{g_{mp} + \\frac{1}{r_{op}}} + \\frac{1}{g_{mn} + \\frac{1}{r_{on}}} \\right)$$\n\n---\n\n### **Final Answer**\n\n- **Including channel-length modulation ($r_{op}, r_{on}$):**\n  $$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mp} + \\frac{1}{r_{op}}} + \\frac{1}{g_{mn} + \\frac{1}{r_{on}}} \\right)$$\n\n- **Neglecting channel-length modulation ($r_{op}, r_{on} \\to \\infty$):**\n  $$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mp}} + \\frac{1}{g_{mn}} \\right)$$",
        "format": "markdown",
        "sha256": "1cb7fdc92cc6d8e5f0d7805d1d868322bee3cce75dd8961b1d636f2473f29ef9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static, gm-based resistance by treating the inverter devices as diode-connected, but misses the dominant oscillation-driven charging and discharging of the load capacitances. The golden solution assigns this type of static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1113,
        "output_tokens": 9132,
        "total_tokens": 10245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8007,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1113,
        "output_tokens": 9132,
        "total_tokens": 10245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8007,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ looking into the supply node of the 3-stage CMOS ring oscillator, we apply a test voltage $v_x$ to the supply node and calculate the resulting small-signal supply current $i_x$.\n\n---\n\n### **1. Circuit & Small-Signal Modeling**\nEach stage $k$ ($k = 1, 2, 3$) is a standard CMOS inverter consisting of:\n* A PMOS transistor ($M_{Pk}$) with transconductance $g_{mp}$ and output resistance $r_{op}$ connected between the supply node $v_x$ and output node $v_{out, k}$.\n* An NMOS transistor ($M_{Nk}$) with transconductance $g_{mn}$ and output resistance $r_{on}$ connected between output node $v_{out, k}$ and ground ($0\\text{ V}$).\n\nFor a ring oscillator with 3 stages in a closed loop, the inputs and outputs are related as:\n$$v_{in,1} = v_{out,3}, \\quad v_{in,2} = v_{out,1}, \\quad v_{in,3} = v_{out,2}$$\n\nThus, the sum of all input voltages equals the sum of all output voltages:\n$$\\sum_{k=1}^{3} v_{in,k} = \\sum_{k=1}^{3} v_{out,k} = V_{\\text{sum}}$$\n\n---\n\n### **2. KCL at Output Node of Each Stage**\nFor stage $k$, the current entering the output node from the PMOS must equal the current leaving through the NMOS:\n\n$$i_{p,k} = i_{n,k}$$\n\n$$g_{mp}(v_x - v_{in,k}) + \\frac{v_x - v_{out,k}}{r_{op}} = g_{mn} v_{in,k} + \\frac{v_{out,k}}{r_{on}}$$\n\nRearranging terms:\n$$v_x \\left( g_{mp} + \\frac{1}{r_{op}} \\right) = v_{in,k} (g_{mp} + g_{mn}) + v_{out,k} \\left( \\frac{1}{r_{op}} + \\frac{1}{r_{on}} \\right)$$\n\nLet us define the effective pull-up and pull-down conductances:\n$$G_p = g_{mp} + \\frac{1}{r_{op}}$$\n$$G_n = g_{mn} + \\frac{1}{r_{on}}$$\n\nThe equation simplifies to:\n$$G_p v_x = (g_{mp} + g_{mn}) v_{in,k} + \\left( \\frac{1}{r_{op}} + \\frac{1}{r_{on}} \\right) v_{out,k}$$\n\nSumming this KCL equation over all 3 stages ($k = 1, 2, 3$):\n$$3 G_p v_x = (g_{mp} + g_{mn}) V_{\\text{sum}} + \\left( \\frac{1}{r_{op}} + \\frac{1}{r_{on}} \\right) V_{\\text{sum}}$$\n\n$$3 G_p v_x = (G_p + G_n) V_{\\text{sum}}$$\n\nSolving for the sum of node voltages $V_{\\text{sum}}$:\n$$V_{\\text{sum}} = \\frac{3 G_p}{G_p + G_n} v_x$$\n\n---\n\n### **3. Total Supply Current $i_x$**\nThe total current $i_x$ drawn from the supply node is the sum of currents flowing into the PMOS transistors of all 3 stages:\n\n$$i_x = \\sum_{k=1}^{3} i_{p,k} = \\sum_{k=1}^{3} \\left[ g_{mp}(v_x - v_{in,k}) + \\frac{v_x - v_{out,k}}{r_{op}} \\right]$$\n\n$$i_x = 3 v_x \\left( g_{mp} + \\frac{1}{r_{op}} \\right) - g_{mp} \\sum_{k=1}^{3} v_{in,k} - \\frac{1}{r_{op}} \\sum_{k=1}^{3} v_{out,k}$$\n\n$$i_x = 3 G_p v_x - G_p V_{\\text{sum}} = G_p (3 v_x - V_{\\text{sum}})$$\n\nSubstituting $V_{\\text{sum}} = \\frac{3 G_p}{G_p + G_n} v_x$:\n\n$$i_x = G_p \\left( 3 v_x - \\frac{3 G_p}{G_p + G_n} v_x \\right) = 3 G_p v_x \\left( 1 - \\frac{G_p}{G_p + G_n} \\right)$$\n\n$$i_x = 3 v_x \\frac{G_p G_n}{G_p + G_n}$$\n\n---\n\n### **4. Small-Signal Resistance $R_X$**\nThe small-signal resistance $R_X = \\frac{v_x}{i_x}$ is:\n\n$$R_X = \\frac{G_p + G_n}{3 G_p G_n} = \\frac{1}{3} \\left( \\frac{1}{G_p} + \\frac{1}{G_n} \\right)$$\n\nSubstituting back $G_p$ and $G_n$:\n\n$$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mp} + \\frac{1}{r_{op}}} + \\frac{1}{g_{mn} + \\frac{1}{r_{on}}} \\right)$$\n\n---\n\n### **Special Cases:**\n\n1. **Neglecting Channel-Length Modulation ($r_{op}, r_{on} \\to \\infty$):**\n   $$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mp}} + \\frac{1}{g_{mn}} \\right) = \\frac{g_{mp} + g_{mn}}{3 g_{mp} g_{mn}}$$\n\n2. **If PMOS and NMOS are matched ($g_{mp} = g_{mn} = g_m$ and $r_{op} = r_{on} \\to \\infty$):**\n   $$R_X = \\frac{2}{3 g_m}$$",
        "format": "markdown",
        "sha256": "504d8c0339df6b12b3aa2706576223ac3e94e58052283e8b4af26d0e8d9700ec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static small-signal derivation is internally consistent, but it ignores oscillation-driven charging and discharging of the load capacitances, the dominant mechanism. The expected resistance is approximately 1/(3 f0 CL), not a gm-based expression.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1113,
        "output_tokens": 10950,
        "total_tokens": 12063,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9475,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1113,
        "output_tokens": 10950,
        "total_tokens": 12063,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9475,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes significantly.**\n\nHere is the detailed explanation of why:\n\n---\n\n### 1. Small-Signal Assumption (DC Equilibrium State)\nThe formula \n$$R_X \\approx \\frac{1}{3} \\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$$\nis derived under the assumption that the circuit is at its **meta-stable DC equilibrium point**, where all node voltages are at the inverter threshold voltage ($V_{in} = V_{out} \\approx V_{DD}/2$). \n\nAt this operating point:\n* Both the NMOS and PMOS devices in every inverter are simultaneously in the **saturation region**.\n* Both devices conduct a continuous bias current (short-circuit current) and exhibit high transconductance ($g_{mn}$ and $g_{mp}$).\n\n---\n\n### 2. Large-Signal Oscillatory State\nWhen the circuit actually **oscillates**:\n* The node voltages perform **rail-to-rail swings** between $0$ and $V_{DD}$.\n* The transistors **do not remain in saturation** at the midpoint:\n  * For most of the oscillation period, the input of an inverter is near $0$ or $V_{DD}$.\n  * When $V_{in} \\approx 0$, the PMOS is in the linear (triode) region while the NMOS is **OFF** ($g_{mn} \\approx 0$).\n  * When $V_{in} \\approx V_{DD}$, the PMOS is **OFF** ($g_{mp} \\approx 0$) while the NMOS is in triode.\n* Because one transistor in each inverter pair is turned OFF for the majority of the cycle, **no static current flows** from the supply node to ground during those times.\n\n---\n\n### 3. Impact on Resistance $R_X$\n* **Time-Varying Resistance:** Under steady-state oscillation, the small-signal resistance looking into the supply node becomes **time-varying**, $R_X(t)$, fluctuating dynamically throughout the period.\n* **Higher Average Resistance:** Current is only drawn from the supply during brief switching transitions (to charge load capacitances and during momentary short-circuit overlap). As a result, the **time-averaged effective resistance** seen by the supply node becomes **much larger** than the DC small-signal resistance calculated at the equilibrium midpoint.",
        "format": "markdown",
        "sha256": "395ab02a375ecc26b817cdb8daa2add98e37a20ecd578a7aed6e883b65ebdef4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that oscillation invalidates the static operating-point picture, but wrongly concludes that the effective supply resistance becomes much higher because devices are off. It misses that capacitive charging sets the current and the resulting resistance remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1198,
        "output_tokens": 3191,
        "total_tokens": 4389,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2676,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1198,
        "output_tokens": 3191,
        "total_tokens": 4389,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2676,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes.**\n\n---\n\n### **Explanation**\n\n#### 1. **Origin of the Initial Formula (DC Operating Point)**\nThe formula \n$$R_X \\approx \\frac{1}{3} \\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$$ \nis derived under the assumption that the circuit is static at its **unstable DC equilibrium point** where all node voltages are equal to the inverter trip voltage ($V_{1} = V_{2} = V_{3} \\approx V_{DD}/2$). \n\nAt this specific DC operating point:\n* Both the NMOS and PMOS devices in every inverter are simultaneously in the **saturation region** and conducting current.\n* A small increase in supply voltage $v_x$ causes the internal node voltages to shift, resulting in a small-signal current per stage of:\n  $$i_p = \\frac{v_x}{\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}}$$\n* Multiplying by 3 identical stages gives the small-signal resistance $R_X$ given in the question.\n\n---\n\n#### 2. **Why the Answer Changes During Oscillation**\nOnce the circuit starts to oscillate, it leaves the equilibrium point and enters **large-signal, non-linear operation**:\n\n1. **Large-Signal Voltage Swings:** \n    Node voltages swing rapidly from rail-to-rail (between $0$ and $V_{DD}$). Small-signal linear approximations around $V_{DD}/2$ are no longer valid.\n\n2. **Transistors Turning OFF:** \n   For most of the oscillation period, the input to any given inverter is close to either $0$ or $V_{DD}$. This turns **one of the transistors OFF** ($V_{GS} < V_{TH}$), dropping its transconductance $g_m$ to zero. Consequently, the static direct current path from $V_{DD}$ to ground is completely cut off for a large portion of the cycle.\n\n3. **Dynamic Current Domination:** \n   The supply current is no longer determined by static device transconductances ($g_{mn}, g_{mp}$), but by the **dynamic charging and discharging of node capacitances** ($C_L$), alongside transient short-circuit currents during transitions:\n   $$I_{\\text{avg}} \\approx 3 \\cdot f_{\\text{osc}} \\cdot C_L \\cdot V_{DD}$$\n\n4. **Time-Varying Impedance:** \n   The effective resistance seen looking into the supply node becomes **time-varying** throughout the oscillation period and, on average, is significantly higher than the static small-signal value calculated at equilibrium.",
        "format": "markdown",
        "sha256": "d568a2185366c1a3de8c6669b396d0df0188221a3e783b06190ade3d9a3a4eb6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive charging as the dynamic supply-current mechanism, but concludes that the resistance becomes significantly higher because devices are off. The oscillation frequency also depends on the device resistance, so RX remains on the order of the MOS on-resistance rather than becoming much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1198,
        "output_tokens": 3983,
        "total_tokens": 5181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3395,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1198,
        "output_tokens": 3983,
        "total_tokens": 5181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3395,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes significantly.**\n\n---\n\n### Explanation\n\n#### 1. Static / Equilibrium Case (Non-Oscillating)\nThe given formula:\n$$R_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)$$\nis valid **only** when the circuit is biased at its unstable equilibrium point (static DC operating point):\n* All internal node voltages are equal to the inverter threshold voltage, typically $V_{DD}/2$.\n* In this condition, **both** the NMOS and PMOS transistors in every inverter operate simultaneously in the **saturation region**.\n* Because the feedback loop forces the gate and drain of each inverter to move together for common-mode supply variations, each inverter acts as two series-connected diode-connected transistors between $V_{DD}$ and ground. \n* Three parallel inverters yield one-third of the individual inverter resistance.\n\n---\n\n#### 2. Oscillating Case (Large-Signal Regime)\nWhen the circuit actually oscillates, it leaves the equilibrium point and enters a **large-signal dynamic state**:\n\n1. **Large Rail-to-Rail Swings:**\n   * The internal nodes swing dynamically between ground ($0\\text{ V}$) and the supply rail ($V_{DD}$).\n2. **Transistor Operating Modes Change:**\n   * For the vast majority of the oscillation period, the inverters are not biased at $V_{DD}/2$. Instead:\n     * When an inverter's input is HIGH ($V_{DD}$), its PMOS is **OFF** (cut-off) and its NMOS is **ON** (triode).\n     * When an inverter's input is LOW ($0\\text{ V}$), its PMOS is **ON** (triode) and its NMOS is **OFF** (cut-off).\n   * Only during extremely brief transitions (zero-crossings) do both transistors conduct simultaneously.\n3. **Impact on Small-Signal Resistance $R_X$:**\n   * When a PMOS is **OFF**, its small-signal conductance drops to nearly zero (i.e., extremely high small-signal resistance to the supply).\n   * When a PMOS is **ON in deep triode**, it acts as a small resistor ($R_{DS,on}$), but the NMOS in series is **OFF**, blocking any DC current path to ground. The supply only sees transient capacitive charging currents.\n   * Consequently, the transconductances $g_{mn}$ and $g_{mp}$ are no longer constant small-signal parameters, making the static small-signal model invalid.\n\n---\n\n### Conclusion\nDuring oscillation, the supply node no longer sees a constant DC resistance defined by saturation $g_m$ values. Instead, it sees a **time-varying, dynamic impedance** whose average value is significantly **higher** than the static small-signal value, determined primarily by dynamic switching currents ($I_{avg} = f \\cdot C_L \\cdot V_{DD}$) rather than continuous cross-conduction current.",
        "format": "markdown",
        "sha256": "18e9d645201a60d3d4f8cf53fb878156b8af32bb25eb4207ed86d9d5996df2aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that oscillation makes supply current dynamic, but concludes the average resistance becomes significantly higher because devices are off. The key result is that capacitive charging sets RX, which remains on the order of the MOS on-resistance, not much higher than the static estimate.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1198,
        "output_tokens": 3427,
        "total_tokens": 4625,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2766,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1198,
        "output_tokens": 3427,
        "total_tokens": 4625,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2766,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As the width of transistor $M_7$ ($W_7$) increases, the **initial voltage gain decreases**.\n\n---\n\n### **Detailed Explanation:**\n\nThe circuit shown is a classic **StrongArm Latch** (dynamic comparator). Its operation during the evaluation phase ($CK$ goes from LOW to HIGH) can be understood in phases:\n\n#### 1. **Integration (Sampling) Phase**\n* When $CK$ transitions high, precharge switches $S_1–S_4$ turn off, and the tail switch $M_7$ turns on.\n* Before the cross-coupled transistors ($M_3, M_4$) turn on, the input differential pair ($M_1, M_2$) begins discharging nodes $P$ and $Q$ from $V_{DD}$.\n* During this period, $M_1$ and $M_2$ act as a differential amplifier integrating the input signal $\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$ onto the internal node capacitances ($C_P, C_Q$).\n\n#### 2. **Derivation of Initial Voltage Gain**\nThe integration phase ends when nodes $P$ and $Q$ drop low enough (by approximately a threshold voltage $V_{TH3,4}$) to turn on $M_3$ and $M_4$. \n\n* The time $\\Delta t$ required for this discharge is inversely proportional to the tail current $I_{\\text{tail}}$:\n  $$\\Delta t \\approx \\frac{C_{P,Q} \\cdot V_{TH3,4}}{I_1 + I_2} \\propto \\frac{1}{I_{\\text{tail}}}$$\n\n* The differential voltage $\\Delta V_{PQ}$ accumulated at nodes $P$ and $Q$ during this time is:\n  $$\\Delta V_{PQ} = \\frac{g_{m1,2} \\cdot \\Delta V_{\\text{in}}}{C_{P,Q}} \\cdot \\Delta t$$\n\n* Substituting $\\Delta t$ into the equation gives the initial voltage gain $A_{v0}$:\n  $$A_{v0} = \\frac{\\Delta V_{PQ}}{\\Delta V_{\\text{in}}} \\propto \\frac{g_{m1,2}}{I_{\\text{tail}}}$$\n\n#### 3. **Effect of Increasing $W_7$**\n* Increasing the width $W_7$ lowers the ON-resistance of $M_7$, which **increases the tail current ($I_{\\text{tail}}$)** and pulls the tail node voltage $V_{\\text{tail}}$ closer to ground.\n* **Shorter Integration Time:** Higher discharge current drains nodes $P$ and $Q$ faster, reducing the time $\\Delta t$ available to sample the input signal.\n* **Lower $g_m / I_{\\text{tail}}$ Efficiency:** For MOS transistors in saturation, $g_{m1,2} \\propto \\sqrt{I_{\\text{tail}}}$, which means:\n  $$A_{v0} \\propto \\frac{\\sqrt{I_{\\text{tail}}}}{I_{\\text{tail}}} = \\frac{1}{\\sqrt{I_{\\text{tail}}}}$$\n  Furthermore, pulling $V_{\\text{tail}}$ closer to 0 V increases the gate-source overdrive voltage $(V_{GS1,2} - V_{TH1,2})$, which decreases the transconductance efficiency $\\frac{g_m}{I_D} = \\frac{2}{V_{GS} - V_{TH}}$.\n\n---\n\n### **Summary / Design Trade-off:**\n* **Increasing $W_7$:** **Decreases the initial voltage gain** (leading to higher input-referred noise and offset), but **increases the comparison speed** (reduces evaluation delay).",
        "format": "markdown",
        "sha256": "c31c41af81f37a4e71f66f4b6e3c4df4fffede35c43d1e6b67feddd8faa9043e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain decreases as M7 widens and explains the trend through increased tail current and the resulting decrease in gm/Itail. The derivation is physically consistent with the golden solution.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1090,
        "output_tokens": 6368,
        "total_tokens": 7458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1090,
        "output_tokens": 6368,
        "total_tokens": 7458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As the width of transistor **$M_7$ ($W_7$) increases**, the initial voltage gain of the circuit **decreases**.\n\n---\n\n### **Detailed Analysis & Derivation**\n\nThis circuit is a **StrongArm latch** (a dynamic comparator). Its operation during the evaluation phase ($CK$ transitions from $0$ to $V_{DD}$) can be divided into an initial integration/amplification phase followed by a regenerative phase.\n\n#### **1. Initial Amplification Phase**\n* **Precharge State ($CK = 0$):** Nodes $P, Q, X,$ and $Y$ are precharged to $V_{DD}$ through PMOS switches $S_1 - S_4$. Transistor $M_7$ is OFF.\n* **Evaluation Start ($CK = V_{DD}$):** Switches $S_1 - S_4$ turn OFF, and tail transistor $M_7$ turns ON, pulling a total tail current $I_{SS}$.\n* Nodes $X$ and $Y$ remain at $V_{DD}$ initially, keeping $M_3$ and $M_4$ OFF ($V_{GS3,4} = 0$).\n* Current flows through input transistors $M_1$ and $M_2$, discharging the parasitic capacitances $C_P$ and $C_Q$ at nodes $P$ and $Q$ down from $V_{DD}$.\n\n#### **2. Integration Time ($t_1$)**\nThis phase lasts until node $P$ (or $Q$) drops by one threshold voltage $V_{THN}$, at which point $M_3$ and $M_4$ turn ON. The time required for this to happen is:\n\n$$t_1 = \\frac{C_P \\cdot V_{THN}}{I_{SS}/2} = \\frac{2 C_P V_{THN}}{I_{SS}}$$\n\n#### **3. Initial Voltage Gain ($A_1$)**\nDuring time $t_1$, an input differential voltage $\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$ creates a differential current $\\Delta I = g_{m1,2} \\Delta V_{\\text{in}}$. \n\nThe resulting differential voltage developed between nodes $P$ and $Q$ at time $t_1$ is:\n\n$$\\Delta V_{PQ} = \\frac{\\Delta I \\cdot t_1}{C_P} = \\frac{g_{m1,2} \\Delta V_{\\text{in}}}{C_P} \\cdot \\left(\\frac{2 C_P V_{THN}}{I_{SS}}\\right) = \\frac{2 g_{m1,2} V_{THN}}{I_{SS}} \\Delta V_{\\text{in}}$$\n\nThe initial voltage gain $A_1$ is defined as:\n\n$$A_1 = \\frac{\\Delta V_{PQ}}{\\Delta V_{\\text{in}}} = \\frac{2 g_{m1,2} V_{THN}}{I_{SS}}$$\n\nSubstituting the transconductance of the input pair $g_{m1,2} = \\sqrt{\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 I_{SS}}$:\n\n$$A_1 = 2 V_{THN} \\sqrt{\\frac{\\mu_n C_{ox} (W/L)_1}{I_{SS}}}$$\n\n---\n\n### **Conclusion**\n\n* Since $I_{SS}$ is directly proportional to the width $W_7$ of tail transistor $M_7$:\n  $$A_1 \\propto \\frac{1}{\\sqrt{I_{SS}}} \\propto \\frac{1}{\\sqrt{W_7}}$$\n* **Physical Intuition:** A larger $M_7$ increases the tail current $I_{SS}$, discharging nodes $P$ and $Q$ much faster. Because the integration time $t_1$ shrinks faster (as $\\frac{1}{I_{SS}}$) than $g_{m1,2}$ grows (as $\\sqrt{I_{SS}}$), the input pair has less time to amplify the input difference, resulting in a **lower initial voltage gain**.",
        "format": "markdown",
        "sha256": "28395e46db5f500c5d1d392299ed6e1f88c2ddde9f13040eac88e8c131f37e2c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that a wider M7 increases tail current and reduces initial gain because the input-pair transconductance grows more slowly than the current. The derivation’s idealized proportionality and constant factors do not change the result.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1090,
        "output_tokens": 5241,
        "total_tokens": 6331,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4335,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1090,
        "output_tokens": 5241,
        "total_tokens": 6331,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4335,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As the width of transistor **$M_7$ increases, the initial voltage gain decreases**.\n\n---\n\n### **Detailed Explanation & Derivation**\n\nThe circuit shown is a classic **StrongArm Dynamic Latch/Comparator**. Its operation during the evaluation phase ($CK$ goes HIGH) can be divided into two main phases: the **pre-regeneration (sampling) phase** and the **regenerative (latching) phase**.\n\n#### 1. Integration Time ($T_1$)\nWhen $CK$ transitions to $V_{DD}$:\n- Switches $S_1 - S_4$ turn OFF.\n- The tail transistor $M_7$ turns ON, drawing a total tail current $I_{SS}$ proportional to its aspect ratio $(W/L)_7$.\n- Transistors $M_1$ and $M_2$ begin discharging nodes $P$ and $Q$ from $V_{DD}$.\n- Transistors $M_3$ and $M_4$ remain OFF until nodes $P$ and $Q$ discharge down to $V_{DD} - V_{TH3}$.\n\nThe time $T_1$ required for nodes $P$ and $Q$ to reach this threshold is inversely proportional to the tail current:\n$$T_1 \\approx \\frac{C_{P,Q} \\cdot V_{TH3}}{I_{SS} / 2}$$\n\n#### 2. Transconductance ($g_{m1,2}$)\nThe differential current produced by the input pair ($M_1, M_2$) in response to an input voltage difference $\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$ is:\n$$\\Delta I = g_{m1,2} \\cdot \\Delta V_{\\text{in}}$$\n\nIn strong inversion, the transconductance $g_{m1,2}$ scales with the square root of the tail current:\n$$g_{m1,2} = \\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_{1,2} \\left(\\frac{I_{SS}}{2}\\right)} \\propto \\sqrt{I_{SS}}$$\n\n#### 3. Initial Voltage Gain ($A_{v0}$)\nThe initial differential voltage $\\Delta V_{P,Q}$ accumulated at nodes $P$ and $Q$ before regeneration starts is:\n$$\\Delta V_{P,Q} = \\frac{\\Delta I \\cdot T_1}{C_{P,Q}} = \\frac{(g_{m1,2} \\cdot \\Delta V_{\\text{in}}) \\cdot \\left(\\frac{C_{P,Q} V_{TH3}}{I_{SS}/2}\\right)}{C_{P,Q}} = \\frac{2 g_{m1,2} V_{TH3}}{I_{SS}} \\cdot \\Delta V_{\\text{in}}$$\n\nTherefore, the initial voltage gain $A_{v0}$ is:\n$$A_{v0} = \\frac{\\Delta V_{P,Q}}{\\Delta V_{\\text{in}}} = \\frac{2 g_{m1,2} V_{TH3}}{I_{SS}}$$\n\nSubstituting $g_{m1,2} \\propto \\sqrt{I_{SS}}$ into the equation gives:\n$$A_{v0} \\propto \\frac{\\sqrt{I_{SS}}}{I_{SS}} = \\frac{1}{\\sqrt{I_{SS}}}$$\n\n---\n\n### **Conclusion**\nSince increasing the width of $M_7$ ($W_7$) increases the tail current $I_{SS}$:\n- Nodes $P$ and $Q$ discharge much faster, **shortening the integration time $T_1$** faster than $g_{m1,2}$ can compensate.\n- As a result, the input pair has less time to integrate the input signal into a differential voltage, causing the **initial voltage gain to decrease** ($A_{v0} \\propto \\frac{1}{\\sqrt{W_7}}$).",
        "format": "markdown",
        "sha256": "98e8efc993ddc84c64c0fb2377c79fd5e96e29a92eb707b0ab9f775306b7dfb3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that increasing M7 width increases tail current and decreases initial gain. The explanation captures the key scaling: input-pair transconductance grows only as the square root of current, while integration gain scales roughly as gm/current.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1090,
        "output_tokens": 4678,
        "total_tokens": 5768,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1090,
        "output_tokens": 4678,
        "total_tokens": 5768,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If we increase the capacitance at intermediate nodes **$P$** and **$Q$** (denoted as $C_P$ or $C_D$), the **initial voltage gain** ($A_{v0}$) of the circuit (the StrongArm dynamic latch/sense amplifier) **increases**.\n\n---\n\n### **Detailed Explanation & Derivation**\n\nThe operation of the StrongArm latch during the evaluation phase ($CK = 1$) can be split into two main stages before regeneration takes over:\n\n#### **1. Discharge of Nodes $P$ and $Q$**\nInitially, nodes $P$, $Q$, $X$, and $Y$ are precharged to $V_{DD}$. When $CK$ goes high:\n* Tail transistor $M_7$ turns on.\n* Input transistors $M_1$ and $M_2$ begin discharging nodes $P$ and $Q$ with currents $I_1$ and $I_2$.\n* The differential input voltage $\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$ produces a differential current:\n  $$\\Delta I = g_{m1,2} \\cdot \\Delta V_{\\text{in}}$$\n\nNodes $P$ and $Q$ discharge from $V_{DD}$ down to $V_{DD} - V_{\\text{THN3}}$ (where $V_{\\text{THN3}}$ is the threshold voltage of $M_3/M_4$). The time $t_1$ required for this discharge is:\n$$t_1 \\approx \\frac{C_P \\cdot V_{\\text{THN3}}}{I_D}$$\n\nDuring this time $t_1$, the differential current $\\Delta I$ accumulates a differential charge $\\Delta Q_P$ at nodes $P$ and $Q$:\n$$\\Delta Q_P = \\Delta I \\cdot t_1 = \\left(g_{m1,2} \\cdot \\Delta V_{\\text{in}}\\right) \\cdot \\left(\\frac{C_P \\cdot V_{\\text{THN3}}}{I_D}\\right)$$\n\n#### **2. Charge Transfer to Output Nodes $X$ and $Y$**\nOnce nodes $P$ and $Q$ drop low enough, transistors $M_3$ and $M_4$ turn **ON**. The differential charge accumulated on $C_P$ is transferred to the capacitance at the output nodes $X$ and $Y$ (denoted as $C_X$). \n\nThe output differential voltage produced by this charge transfer is:\n$$\\Delta V_{\\text{out,1}} = \\frac{\\Delta Q_P}{C_X} = \\frac{g_{m1,2}}{I_D} \\cdot \\left(\\frac{C_P}{C_X}\\right) \\cdot V_{\\text{THN3}} \\cdot \\Delta V_{\\text{in}}$$\n\nAdding the differential voltage accumulated as $X$ and $Y$ discharge by $|V_{\\text{THP}}|$ (until cross-coupled PMOS pair $M_5/M_6$ turns on to start exponential regeneration):\n$$\\Delta V_{\\text{out,2}} = \\frac{g_{m1,2}}{I_D} \\cdot |V_{\\text{THP}}| \\cdot \\Delta V_{\\text{in}}$$\n\n#### **3. Total Initial Voltage Gain**\nSumming both components, the **initial voltage gain** $A_{v0} = \\frac{\\Delta V_{\\text{out}}}{\\Delta V_{\\text{in}}}$ prior to regeneration is:\n\n$$A_{v0} = \\frac{g_{m1,2}}{I_D} \\left( |V_{\\text{THP}}| + \\frac{C_P}{C_X} V_{\\text{THN3}} \\right)$$\n\n---\n\n### **Key Takeaways**\n\n1. **Gain Increases:** Because $A_{v0}$ is directly proportional to $C_P$, increasing the capacitance at nodes $P$ and $Q$ **increases the initial voltage gain**.\n2. **Why it happens:** A larger capacitance $C_P$ delays the conduction of $M_3/M_4$, giving the input pair $M_1/M_2$ **more time** to integrate the differential input signal into a larger differential charge before regeneration begins.\n3. **Trade-off:** While increasing $C_P$ increases initial gain (which helps reduce input-referred offset and noise), it **slows down the comparator** (increases evaluation delay) and increases dynamic power consumption.",
        "format": "markdown",
        "sha256": "64aa7fffd822cba1c1ba300c34c49154721304116bd8eef84c0bab391e905399"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the essential result: increasing the capacitance at P and Q leaves the initial gain approximately unchanged, because the longer amplification time cancels the slower voltage buildup. Its claim that the extra integration time increases gain is therefore incorrect, though it recognizes the relevant nodes and transient mechanism.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 8521,
        "total_tokens": 9610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7533,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 8521,
        "total_tokens": 9610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7533,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit (a **StrongArm latch** dynamic comparator), **increasing the capacitance at nodes P and Q increases the initial voltage gain** of the latch.\n\n---\n\n### **Detailed Explanation**\n\n#### 1. **Operation Overview**\n* **Reset Phase ($CK = 0$):** \n  Switches $S_1-S_4$ turn ON, precharging nodes $P, Q, X,$ and $Y$ to $V_{DD}$. Transistor $M_7$ is OFF.\n  \n* **Evaluation Phase ($CK = 1$):** \n  $S_1-S_4$ turn OFF and $M_7$ turns ON. Input transistors $M_1$ and $M_2$ begin drawing currents $I_1$ and $I_2$, respectively, proportional to $V_{\\text{in1}}$ and $V_{\\text{in2}}$.\n\n---\n\n#### 2. **Mechanism of Initial Gain Generation**\n\n1. **Discharge of Nodes P and Q:**\n   Initially, transistors $M_3$ and $M_4$ are OFF because $V_X = V_Y = V_{DD}$ (so $V_{GS3} = V_{GS4} = 0$). \n   Assuming $V_{\\text{in1}} > V_{\\text{in2}}$, $M_1$ draws more current than $M_2$ ($I_1 > I_2$). Nodes $P$ and $Q$ discharge from $V_{DD}$ at rates:\n   $$\\frac{dV_P}{dt} = -\\frac{I_1}{C_P}, \\quad \\frac{dV_Q}{dt} = -\\frac{I_2}{C_Q}$$\n\n2. **Sequential Turning ON of $M_3$ and $M_4$:**\n   * Node $P$ drops to $V_{DD} - V_{\\text{TH3}}$ first, turning **$M_3$ ON**.\n   * Node $X$ immediately begins discharging through $M_3$ and $M_1$ at a rate of approximately $I_1 / C_X$.\n   * At this moment, node $Q$ has not yet reached $V_{DD} - V_{\\text{TH4}}$, so **$M_4$ remains OFF**, holding node $Y$ at $V_{DD}$.\n\n3. **Role of $C_P$ and $C_Q$ ($C_{P,Q}$):**\n   * The time delay $\\Delta t$ between $M_3$ turning ON and $M_4$ turning ON is the time it takes for $V_Q$ to finish discharging to $V_{DD} - V_{\\text{TH4}}$.\n   * Because $V_Q$ discharges through capacitor $C_Q$, this delay time $\\Delta t$ is **directly proportional to the capacitance at node Q ($C_{P,Q}$)**:\n     $$\\Delta t \\propto C_{P,Q} \\cdot \\frac{\\Delta V_{in}}{I_{SS}}$$\n\n4. **Output Voltage Difference:**\n   During this time interval $\\Delta t$, node $X$ discharges while node $Y$ remains fixed at $V_{DD}$. This creates an initial differential output voltage:\n   $$\\Delta V_{\\text{out}} = V_Y - V_X \\approx \\left(\\frac{I_1}{C_{\\text{out}}}\\right) \\Delta t \\propto \\frac{C_{P,Q}}{C_{\\text{out}}} \\Delta V_{\\text{in}}$$\n\n---\n\n### **Mathematical Gain Expression**\n\nThe initial voltage gain $A_v$ of the StrongArm latch before regeneration takes over is approximated as:\n\n$$A_v = \\frac{\\Delta V_{\\text{out}}}{\\Delta V_{\\text{in}}} \\approx \\frac{C_{P,Q}}{C_{\\text{out}}} \\cdot \\frac{2 \\, g_{m1,2} \\, V_{\\text{THN}}}{I_{SS}}$$\n\nWhere:\n* $C_{P,Q}$ is the parasitic/added capacitance at nodes P and Q.\n* $C_{\\text{out}}$ is the capacitance at output nodes X and Y.\n* $g_{m1,2}$ is the transconductance of the input pair.\n* $V_{\\text{THN}}$ is the threshold voltage of $M_3/M_4$.\n\n---\n\n### **Summary & Trade-off**\n* **Effect:** Increasing $C_P$ and $C_Q$ **increases the initial voltage gain** ($A_v \\propto C_{P,Q}$).\n* **Trade-off:** Larger capacitance at nodes P and Q increases the overall evaluation delay and power consumption of the comparator, reducing its maximum operating speed.",
        "format": "markdown",
        "sha256": "1eb652a3209326d446e48db01dc9117821bb61f960f9296b11f0486053f268b8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is opposite to the golden solution: added capacitance does not increase initial gain, because it proportionally lengthens the amplification interval and cancels from the gain. The answer does recognize that larger capacitance slows evaluation, but its gain mechanism and expression are incorrect.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 7323,
        "total_tokens": 8412,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6283,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 7323,
        "total_tokens": 8412,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6283,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the capacitance at nodes **P** and **Q** ($C_{P,Q}$) is increased, the **initial voltage gain** (the gain established during the integration phase before regenerative latching begins) **increases**.\n\n---\n\n### **Detailed Explanation**\n\nThe circuit shown is a classic **StrongARM latch / dynamic comparator**. Its evaluation phase (when $CK$ goes High) operates in two distinct sub-phases prior to regeneration:\n\n1. **Phase 1: Discharging Nodes P and Q**\n   - When $CK$ transitions High, the tail transistor $M_7$ turns ON, and $M_1, M_2$ begin discharging nodes **P** and **Q** from $V_{DD}$.\n   - Transistors $M_3$ and $M_4$ remain **OFF** until nodes P and Q drop below $V_{DD} - V_{THN}$.\n   - The duration of this initial integration phase is directly proportional to the node capacitance:\n     $$t_1 \\approx \\frac{C_{P,Q} \\cdot V_{THN}}{I_{SS}/2}$$\n\n2. **Phase 2: Discharging Output Nodes X and Y**\n   - Once $V_P$ and $V_Q$ drop below $V_{DD} - V_{THN}$, $M_3$ and $M_4$ turn ON, allowing current to flow from output nodes **X** and **Y** into nodes P and Q.\n   - The phase ends when nodes X and Y fall low enough to turn ON the cross-coupled PMOS pair ($M_5, M_6$), triggering positive feedback (regeneration).\n\n---\n\n### **Why the Gain Increases**\n\n* **Longer Integration Time:** Increasing $C_{P,Q}$ increases the time $t_1$ required to discharge nodes P and Q.\n* **Greater Differential Charge Accumulation:** Because the input differential pair ($M_1, M_2$) integrates the input difference $\\Delta V_{in} = V_{in1} - V_{in2}$ into a differential current $\\Delta I = g_{m1,2} \\Delta V_{in}$ over a **longer period of time**, more differential voltage accumulates before positive feedback takes over.\n\nQuantitatively, the initial voltage gain $A_v = \\frac{\\Delta V_{out}}{\\Delta V_{in}}$ at the onset of regeneration is approximately given by:\n\n$$A_v \\propto \\frac{g_{m1,2}}{I_{SS}} \\cdot \\frac{C_{P,Q}}{C_{out}} \\cdot V_{TH}$$\n\n*(where $C_{out}$ is the total capacitance at output nodes X and Y).*\n\n---\n\n### **Summary of Trade-offs**\n\n* **Higher Initial Gain ($\\uparrow C_{P,Q}$):** \n  * **Advantage:** Reduces the comparator’s **input-referred offset** and **input-referred noise** because the signal is amplified more before the noisy latching action begins.\n* **Slower Speed ($\\uparrow C_{P,Q}$):** \n  * **Disadvantage:** Increases the evaluation delay (latency), reducing the maximum clock frequency of the comparator.",
        "format": "markdown",
        "sha256": "f1d6e134ab2d97338c107079b798f124d33da7dccd79de5b93479d7651ec3ecd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The main conclusion is wrong: increasing the capacitance does not increase the initial gain. The answer correctly notes that it lengthens the discharge interval and slows the comparator, but misses that the reduced voltage slope cancels the longer interval.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 11262,
        "total_tokens": 12351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10576,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 11262,
        "total_tokens": 12351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10576,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of $M_5$ and $M_6$ **degrades the speed** of the circuit (i.e., increases the latching/decision delay). \n\nHere is the step-by-step physical explanation of why this happens during the operation of the **StrongArm Sense Amplifier**:\n\n---\n\n### 1. Integration Phase (Initial Discharge Delay)\n* **Initial State:** Before evaluation ($CK$ is LOW), all output nodes ($X, Y$) and internal nodes ($P, Q$) are precharged to $V_{DD}$.\n* **Transistor States:** At the start of evaluation ($CK$ goes HIGH), $M_5$ and $M_6$ are **completely OFF** because their sources and gates are both at $V_{DD}$.\n* **Impact of Sizing:** \n  * The output nodes $X$ and $Y$ must first be discharged by the NMOS transistors ($M_3, M_4, M_1, M_2$) from $V_{DD}$ down to $V_{DD} - |V_{TH,p}|$ before $M_5$ or $M_6$ can even turn ON to begin the regeneration process.\n  * Increasing the widths of $M_5$ and $M_6$ adds parasitic gate capacitance ($C_{gd}, C_{gb}$) and drain junction capacitance directly to nodes $X$ and $Y$.\n  * Since $M_5$ and $M_6$ provide **zero driving current** while OFF, this added capacitance simply acts as extra load, **slowing down the initial discharge** of nodes $X$ and $Y$.\n\n---\n\n### 2. Regeneration Phase\n* Once one of the output nodes drops below $V_{DD} - |V_{TH,p}|$, the cross-coupled PMOS pair ($M_5/M_6$) turns ON, initiating positive feedback.\n* The time constant during regeneration is approximately:\n  $$\\tau = \\frac{C_L}{g_{mn3,4} + g_{mp5,6}}$$\n* **Impact of Sizing:**\n  * Because PMOS transistors have significantly lower hole mobility ($\\mu_p \\approx \\frac{1}{2}\\text{ to }\\frac{1}{3}\\mu_n$), the transconductance gain ($\\Delta g_{mp}$) gained per unit width is relatively small compared to the additional parasitic capacitance ($\\Delta C_L$) added.\n  * As a result, increasing $W_5$ and $W_6$ does not noticeably improve the regeneration time constant $\\tau$, and can even worsen it.\n\n---\n\n### Summary\nBecause larger $M_5$ and $M_6$ transistors add significant parasitic capacitance without contributing any current during the crucial initial discharge phase, the **overall speed degrades**. For maximum speed, $M_5$ and $M_6$ are typically kept close to minimum width in StrongArm latch designs.",
        "format": "markdown",
        "sha256": "a46ed6706cee168c89d3140fdbe0369ad8ba9289403c476729fa68abde2906b8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: widening M5/M6 initially improves speed because their stronger regeneration outweighs added capacitance. It identifies added capacitance as a real eventual limitation, but incorrectly treats it as dominant from the start.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 3801,
        "total_tokens": 4890,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 3801,
        "total_tokens": 4890,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of transistors **$M_5$** and **$M_6$** will **degrade** the speed of the circuit (i.e., increase the delay).\n\n---\n\n### **Detailed Explanation**\n\nThe circuit shown is a classic **StrongArm latch** (dynamic comparator). Its operation occurs in three main phases:\n\n#### 1. **Precharge Phase ($CK = 0$)**\n* PMOS switches $S_1, S_2, S_3, S_4$ are ON, precharging nodes $P, Q, X,$ and $Y$ to $V_{DD}$.\n* Transistors $M_5$ and $M_6$ are **OFF** because $V_{GS5} = V_{GS6} = 0$.\n\n#### 2. **Evaluation Phase ($CK = 1$)**\n* $M_7$ turns ON, allowing current to flow to ground through input transistors $M_1$ and $M_2$.\n* Assuming $V_{\\text{in1}} > V_{\\text{in2}}$, $M_1$ conducts more current than $M_2$, so node $P$ discharges faster than node $Q$.\n* Once node $P$ drops below $V_{DD} - V_{THN}$, transistor $M_3$ turns ON, causing output node $X$ to begin discharging toward ground.\n\n#### 3. **Regeneration Phase**\n* As node $X$ drops below $V_{DD} - |V_{THP}|$, PMOS transistor **$M_6$ turns ON** (since its gate is connected to $X$). $M_6$ pulls node $Y$ back up to $V_{DD}$.\n* Because node $Y$ remains high ($\\approx V_{DD}$), transistor **$M_5$ remains OFF** ($V_{GS5} \\approx 0$).\n* Node $X$ continues discharging all the way down to $0\\text{ V}$ through $M_3$ and $M_1$.\n\n---\n\n### **Why Increasing the Widths of $M_5$ and $M_6$ Degrades Speed:**\n\n1. **Increased Parasitic Capacitance:** \n   Increasing the width ($W$) of $M_5$ and $M_6$ directly increases their parasitic capacitances (drain-body $C_{db}$, gate-drain $C_{gd}$, and gate-source $C_{gs}$) attached to output nodes $X$ and $Y$.\n\n2. **$M_5$ Provides No Pull-Down Current:** \n   During evaluation, node $X$ must swing all the way from $V_{DD}$ down to ground. However, $M_5$ is **OFF** throughout this transition because its gate (connected to node $Y$) stays near $V_{DD}$. Thus, making $M_5$ larger adds extra capacitive load to node $X$ **without providing any current to help discharge it**.\n\n3. **Output Discharge Bottleneck:** \n   The total delay of the comparator is dominated by the time required to discharge node $X$ down to ground. Since larger PMOS transistors increase the capacitive load on node $X$ while offering no assistance in pulling it down, the discharge rate slows down.\n\n### **Conclusion**\nWhile larger $M_5 / M_6$ transistors can pull the non-discharging node ($Y$) up to $V_{DD}$ faster, the dominant factor determining output decision speed is the added parasitic capacitance at the output nodes. Therefore, increasing the widths of $M_5$ and $M_6$ **degrades the overall speed** of the circuit.",
        "format": "markdown",
        "sha256": "54d1b89345e8d2d07ff55b14dea8813a30f7ece8c8cd52325e7240b7c2cda317"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the central result: wider M5/M6 initially improve speed because stronger regeneration dominates their added capacitance. It identifies capacitance as a real eventual limit and notes faster pull-up, but incorrectly treats capacitance as dominant from the outset.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 6908,
        "total_tokens": 7997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6123,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 6908,
        "total_tokens": 7997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6123,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of **$M_5$** and **$M_6$** will **degrade the speed** (i.e., increase the decision delay / lower the maximum operating frequency) of the StrongARM latch comparator.\n\n---\n\n### **Detailed Explanation:**\n\nThe circuit shown is a classic **StrongARM Dynamic Latch/Comparator**. Its operation during the evaluation phase ($CK$ goes from LOW to HIGH) occurs in two main stages:\n\n#### 1. **Initial Discharge / Amplification Phase (Pre-Regeneration)**\n* When $CK$ goes high, the precharge transistors ($S_1–S_4$) turn off, and tail transistor $M_7$ turns on.\n* $M_1$ and $M_2$ begin discharging nodes $P$ and $Q$ at rates proportional to the input differential voltage ($V_{\\text{in1}} - V_{\\text{in2}}$).\n* Once nodes $P$ and $Q$ drop below $V_{DD} - V_{th,n}$, transistors $M_3$ and $M_4$ turn on and start discharging the output nodes $X$ and $Y$ from $V_{DD}$.\n* During this entire initial phase, **$M_5$ and $M_6$ are turned OFF** ($V_{GS} = 0$). They contribute **zero driving current**, but their gate and drain terminals are connected to nodes $X$ and $Y$, acting purely as **parasitic capacitive loads** ($C_{gd}, C_{gs}, C_{db}$).\n* **Impact of larger $W_5, W_6$:** Increasing the widths of $M_5$ and $M_6$ increases the total parasitic capacitance at nodes $X$ and $Y$. This causes nodes $X$ and $Y$ to discharge **more slowly**, delaying the onset of the regeneration phase (the time it takes for $X$ or $Y$ to drop below $V_{DD} - |V_{th,p}|$).\n\n#### 2. **Regeneration Phase**\n* Once node $X$ or $Y$ drops sufficiently to turn on $M_5$ or $M_6$, cross-coupled positive feedback begins to lock the final output state (one output pulled to $V_{DD}$, the other to $GND$).\n* Although larger PMOS transistors offer higher transconductance ($g_{m,p}$), PMOS carrier mobility ($\\mu_p$) is significantly lower than NMOS mobility ($\\mu_n$). \n* The delay penalty caused by the added parasitic capacitance on nodes $X$ and $Y$ **outweighs** any slight gain in regeneration speed from higher $g_{m,p}$. \n* Additionally, a larger PMOS transistor on the node discharging to ground creates stronger contention against the NMOS pull-down path ($M_3/M_1$ or $M_4/M_2$), further slowing down the transition.\n\n---\n\n### **Summary**\nFor optimal speed in a StrongARM latch, **$M_5$ and $M_6$ are typically kept close to minimum width** to minimize capacitive loading at the output nodes $X$ and $Y$. Increasing their widths **degrades the overall circuit speed**.",
        "format": "markdown",
        "sha256": "9c502beb0dcdb567fa53faa94c112085095d9bed299e81ebffb7eb9e9d8e6367"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the cross-coupled PMOS devices and the capacitance penalty, but reverses the key initial trend: stronger regeneration dominates initially, with capacitance limiting or degrading speed only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 4762,
        "total_tokens": 5851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 4762,
        "total_tokens": 5851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine how increasing the width of the clocked transistors ($W_{ck}$) affects the speed of the circuit, we must analyze the trade-off between **transistor resistance** and **parasitic capacitance**.\n\n---\n\n### **1. Summary / Direct Answer**\n\n* **Initially (for small to moderate widths):** Increasing $W_{ck}$ **improves** the speed because the reduction in the ON-resistance of the clocked transistors allows faster charging and discharging of nodes $X$ and $Y$.\n* **Beyond an optimal width:** Further increasing $W_{ck}$ **degrades** the speed because the added parasitic drain capacitance at nodes $X$ and $Y$ (self-loading) and gate capacitance on the clock lines dominate over the small reduction in resistance.\n\nThus, there is an **optimal transistor width** for maximum speed.\n\n---\n\n### **2. Detailed Analysis**\n\nThe circuit shown is a dynamic $C^2\\text{MOS}$-based frequency divider (toggle latch loop) consisting of two clocked inverter stages and a standard inverter $\\text{Inv}_3$. \n\nWhen we increase the width of the clocked transistors (driven by $CK$ and $\\overline{CK}$), two opposing effects occur:\n\n#### **A. Reduction in ON-Resistance (Improves Speed)**\n* The clocked transistors act as switches in series with the input-driven transistors.\n* The total pull-up or pull-down resistance of each clocked inverter stage is:\n  $$R_{\\text{total}} = R_{\\text{in}} + R_{ck}$$\n  where $R_{ck} \\propto \\frac{1}{W_{ck}}$.\n* Increasing $W_{ck}$ reduces $R_{ck}$, which increases the drive current available to charge or discharge output nodes $X$ and $Y$. This tends to **reduce propagation delay** and **increase circuit speed**.\n\n---\n\n#### **B. Parasitic Capacitance / Self-Loading (Degrades Speed)**\n* As shown in the schematic, the drains of the clocked transistors are connected directly to the output nodes $X$ and $Y$.\n* The total capacitance at node $X$ (or $Y$) is:\n  $$C_{\\text{out}} = C_{\\text{load, next stage}} + C_{\\text{drain, input}} + C_{\\text{drain, ck}}$$\n  where $C_{\\text{drain, ck}} \\propto W_{ck}$.\n* Increasing $W_{ck}$ linearly increases the drain-junction capacitance and gate-drain overlap capacitance at nodes $X$ and $Y$. \n* Since the delay is roughly proportional to $\\tau \\approx R_{\\text{total}} \\cdot C_{\\text{out}}$, once $W_{ck}$ becomes large, the linear increase in $C_{\\text{out}}$ grows faster than the diminishing reduction in $R_{\\text{total}}$, causing propagation delay to increase (**degrading speed**).\n\n---\n\n#### **C. Clock Line Loading (Degrades Speed)**\n* Larger clocked transistors present a higher gate capacitance ($C_{g} \\propto W_{ck}$) to the clock signals $CK$ and $\\overline{CK}$.\n* If the clock driver has a finite driving capability, this increased load slows down the clock transition edges (slower rise/fall times), which delays stage activation and further **degrades circuit speed**.\n\n---\n\n### **Conclusion**\n\n* **If the clocked transistors are currently undersized:** Increasing their width will **improve** the speed.\n* **If the clocked transistors are already sized near their optimum:** Increasing their width further will **degrade** the speed due to self-loading at nodes $X$ and $Y$ and heavy loading on the clock driver.",
        "format": "markdown",
        "sha256": "2164008cd41e8ddd0d3f6957c9c24f5dc5c168f25c149bfab3f5a185c4704b52"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening the clocked transistors initially improves speed by lowering their on-resistance, while added node capacitance eventually limits or reverses the benefit, yielding an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1098,
        "output_tokens": 5356,
        "total_tokens": 6454,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4573,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1098,
        "output_tokens": 5356,
        "total_tokens": 6454,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4573,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Whether the speed improves or degrades depends on the transistor width relative to an **optimal size**, as there is a fundamental trade-off between **series resistance** and **parasitic capacitance**. \n\nHere is the detailed analysis:\n\n---\n\n### **1. Summary Answer**\n* **Initially (Small Widths):** Increasing the width of the clocked transistors **improves** speed because it significantly reduces their on-resistance ($R_{on}$), allowing nodes $X$ and $Y$ to charge and discharge faster.\n* **Beyond an Optimal Width (Large Widths):** Increasing the width **degrades** speed because the added parasitic drain capacitance at the output nodes ($X$ and $Y$) and the increased clock line loading outweigh the benefit of lower resistance.\n\n---\n\n### **2. Detailed Circuit Breakdown**\n\nIn this C2MOS (Clocked CMOS) topology:\n* The **clocked transistors** are placed **internally** (their drains are connected directly to the output nodes $X$ and $Y$).\n* The **data/input transistors** ($M_1$ and the top PMOS) are connected to the power rails ($V_{DD}$ and $GND$).\n\nWhen the width of the clocked transistors ($W_{clk}$) is increased, two competing effects take place:\n\n#### **A. The Positive Effect: Lower Resistance**\nThe series on-resistance of the clocked transistor is inversely proportional to its width:\n$$R_{clk} \\propto \\frac{1}{W_{clk}}$$\nA larger $W_{clk}$ reduces $R_{clk}$, increasing the driving current available to pull node $X$ (or $Y$) up to $V_{DD}$ or down to $GND$. This tends to **reduce propagation delay (improve speed)**.\n\n#### **B. The Negative Effect: Increased Output Capacitance**\nBecause the clocked transistors are attached directly to the output nodes $X$ and $Y$, their drain-junction parasitic capacitances ($C_{db}$) load nodes $X$ and $Y$ directly:\n$$C_{out} = C_{other} + \\alpha \\cdot W_{clk}$$\nA larger $W_{clk}$ directly increases the total capacitance that must be charged or discharged at nodes $X$ and $Y$. This tends to **increase propagation delay (degrade speed)**.\n\n#### **C. Clock Line Loading**\nLarger clocked transistors present a larger gate capacitance ($C_{g} \\propto W_{clk}$) to the clock drivers ($CK$ and $\\overline{CK}$). This slows down the clock rise/fall edges, which further **degrades circuit speed**.\n\n---\n\n### **3. Mathematical Formulation of Propagation Delay**\n\nThe overall propagation delay $\\tau$ of a stage can be modeled as:\n$$\\tau \\approx (R_{in} + R_{clk}) \\cdot C_{out} = \\left(R_{in} + \\frac{\\beta}{W_{clk}}\\right) (C_{other} + \\alpha W_{clk})$$\n\nExpanding this gives:\n$$\\tau = R_{in} C_{other} + \\alpha \\beta + \\frac{\\beta C_{other}}{W_{clk}} + \\alpha R_{in} W_{clk}$$\n\n* For **small $W_{clk}$**: The term $\\frac{\\beta C_{other}}{W_{clk}}$ dominates. Increasing $W_{clk}$ **decreases delay $\\tau$ (improves speed)**.\n* For **large $W_{clk}$**: The term $\\alpha R_{in} W_{clk}$ dominates. Increasing $W_{clk}$ **increases delay $\\tau$ (degrades speed)**.\n\n---\n\n### **Conclusion**\nThere exists an **optimal width** $W_{clk, opt}$ that maximizes the maximum operating frequency. Increasing the width of the clocked transistors:\n1. **Improves speed** if they are currently undersized.\n2. **Degrades speed** if they are increased beyond the optimal width due to excessive self-loading at nodes $X$ and $Y$.",
        "format": "markdown",
        "sha256": "60641e92844101c0d64ef67f91ab8d8736034d4bca2140f0bdba66f2130b70c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening the clocked transistors initially improves speed by reducing their on-resistance, while added capacitance at the latch nodes eventually limits or reverses the benefit, producing an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1098,
        "output_tokens": 10649,
        "total_tokens": 11747,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9796,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1098,
        "output_tokens": 10649,
        "total_tokens": 11747,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9796,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine how increasing the width ($W_{clk}$) of the clocked transistors affects the speed of the circuit, we must analyze the competing effects on **path resistance**, **output capacitance**, and **clock loading**.\n\n---\n\n### **1. Circuit Overview**\nThe circuit shown is a **dynamic C$^2$MOS divide-by-2 circuit (or clocked ring oscillator)** consisting of:\n- **Stage 1:** A clocked inverter driven by $Z$ and clocked by ($\\overline{CK}$, $CK$).\n- **Stage 2:** A clocked inverter driven by $X$ and clocked by ($CK$, $\\overline{CK}$).\n- **Stage 3 ($\\text{Inv}_3$):** A standard static inverter driving node $Z$.\n\nNotice that the **clocked transistors are the inner transistors** (directly connected to the output nodes $X$ and $Y$), while the data transistors (including $M_1$) are the **outer transistors** (connected to $V_{DD}$ and $GND$).\n\n---\n\n### **2. Effects of Increasing Clocked Transistor Width ($W_{clk}$)**\n\n#### **A. Resistance Reduction (Improves Speed)**\n- The total pull-up or pull-down resistance of Stage 1 (or Stage 2) is the series sum of the data transistor resistance and the clock transistor resistance:\n  $$R_{total} = R_{data} + R_{clk}$$\n- Increasing $W_{clk}$ decreases the ON-resistance of the clocked transistors ($R_{clk} \\propto \\frac{1}{W_{clk}}$).\n- Lower resistance increases the charging/discharging current available to drive nodes $X$ and $Y$, which **reduces propagation delay and improves speed**.\n\n---\n\n#### **B. Parasitic Drain Capacitance / Self-Loading (Degrades Speed)**\n- Because the clocked transistors are connected directly to the output nodes $X$ and $Y$, their **drain junction capacitances ($C_{db}$)** contribute directly to the total load capacitance at nodes $X$ and $Y$:\n  $$C_{node} = C_{load} + C_{db, clk} + C_{db, data}$$\n- Increasing $W_{clk}$ linearly increases $C_{db, clk}$. \n- If $W_{clk}$ becomes very large, $R_{clk}$ approaches zero and $R_{data}$ dominates $R_{total}$. Further increasing $W_{clk}$ no longer significantly reduces $R_{total}$, but continues to add parasitic capacitance $C_{db, clk}$, causing the $RC$ delay ($\\tau = R_{total} \\cdot C_{node}$) to increase, which **degrades speed**.\n\n---\n\n#### **C. Clock Line Loading (Degrades Speed)**\n- The gate capacitance of the clocked transistors is driven by the clock generator ($CK$ / $\\overline{CK}$).\n- Increasing $W_{clk}$ increases the load capacitance on the clock lines ($C_{g, clk} \\propto W_{clk}$).\n- Slower clock edges (longer clock rise/fall times) delay the turn-on time of the clocked switches, which **degrades overall circuit speed**.\n\n---\n\n### **Summary / Conclusion**\n\n* **If $W_{clk}$ is initially small:** The reduction in series resistance dominates over the added drain capacitance, so **speed IMPROVES**.\n* **If $W_{clk}$ is increased beyond an optimal size:** The added parasitic drain capacitance ($C_{db}$) and clock gate capacitance ($C_g$) dominate over any small reduction in resistance, so **speed DEGRADES**.\n\nThus, there is an **optimal width** for the clocked transistors. Increasing the width **improves speed up to an optimal point**, beyond which further increases **degrade speed**.",
        "format": "markdown",
        "sha256": "cc067d090d0f88989fb51dd7bff9bd943bcb6c8bfd12c848f89ac46b90c51e41"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly says widening initially improves speed by reducing the clocked devices’ on-resistance, while added capacitance at X and Y eventually limits or reverses the benefit, giving an optimum width. The extra clock-loading discussion is secondary and does not undermine the essential answer.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1098,
        "output_tokens": 8341,
        "total_tokens": 9439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7541,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1098,
        "output_tokens": 8341,
        "total_tokens": 9439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7541,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, the structure in the figure provides **quadrature outputs** (outputs that are $90^\\circ$ out of phase with respect to each other).\n\n---\n\n### **Detailed Explanation**\n\n1. **Circuit Topology:**\n   * The circuit is a **master-slave $D$-flip-flop** configured as a **divide-by-2 frequency divider** via negative feedback.\n   * **Master Stage (Left):** A clocked inverter active when $CK = 1$ ($\\overline{CK} = 0$). Its output is node $X$.\n   * **Slave Stage (Middle):** A clocked inverter active when $CK = 0$ ($\\overline{CK} = 1$). Its output is node $Y$.\n   * **Inverter $\\text{Inv}_3$ (Right):** Inverts node $Y$ to produce output $Z$, which feeds back into the input of the master stage.\n\n2. **Frequency Division:**\n   * Because of the inverted feedback ($Z = \\overline{Y}$), the logic state toggles every full clock cycle, resulting in an output signal frequency that is half the clock frequency:\n     $$f_{\\text{out}} = \\frac{f_{CK}}{2} \\implies T_{\\text{out}} = 2 T_{CK}$$\n\n3. **Phase Relationship (Quadrature Output):**\n   * Node $X$ transitions on the **rising edge** of the clock ($CK = 1$).\n   * Node $Y$ (and node $Z$) transitions on the **falling edge** of the clock ($CK = 0$).\n   * The time delay between the transitions at node $X$ and node $Y$ is half a clock period:\n     $$\\Delta t = \\frac{T_{CK}}{2}$$\n   * Relative to the output signal period ($T_{\\text{out}} = 2 T_{CK}$), this time delay corresponds to a phase difference of:\n     $$\\Delta \\phi = \\frac{\\Delta t}{T_{\\text{out}}} \\times 360^\\circ = \\frac{T_{CK} / 2}{2 T_{CK}} \\times 360^\\circ = 90^\\circ$$\n\n---\n\n### **Conclusion**\nThe outputs at node $X$ and node $Y$ (or $Z$) operate at half the clock frequency and maintain a **$90^\\circ$ phase shift**, making them **quadrature outputs**. By adding an inverter to node $X$, the circuit can provide all four quadrature phases ($0^\\circ, 90^\\circ, 180^\\circ, 270^\\circ$).",
        "format": "markdown",
        "sha256": "7b87930a8579d55357e49a18562212de7162ed96d9ec232e4127423e92a228c9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the divide-by-two and the nominal 90° relationship from the half-clock-period separation, but treats quadrature as exact and omits both nonidealities: Inv3 delay skewing Z and unequal loading of the two latches.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 4569,
        "total_tokens": 5653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 4569,
        "total_tokens": 5653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the structure in the figure provides quadrature outputs.**\n\n---\n\n### **Detailed Explanation & Proof**\n\n#### 1. **Circuit Topology**\nThe circuit consists of:\n* **Stage 1 (Master Latch):** A $C^2MOS$ clocked inverter enabled when $CK = 1$ ($\\overline{CK} = 0$). It takes node $Z$ as input and outputs to node $X$.\n* **Stage 2 (Slave Latch):** A $C^2MOS$ clocked inverter enabled when $CK = 0$ ($\\overline{CK} = 1$). It takes node $X$ as input and outputs to node $Y$.\n* **Stage 3 ($\\text{Inv}_3$):** A static inverter that produces output $Z = \\overline{Y}$.\n\nTogether, this forms a **master-slave divide-by-2 circuit** (a D flip-flop connected with negative feedback).\n\n---\n\n#### 2. **Operation State Sequence**\nLet’s trace the logic states of nodes $X$, $Y$, and $Z$ over sequential half-cycles of the input clock $CK$:\n\n1. **$CK = 1$ (Phase 1):**\n   * Stage 1 is **ON**: $X = \\overline{Z}$. Since $Z = \\overline{Y}$, $X = Y$.\n   * Stage 2 is **OFF**: $Y$ holds its previous value.\n   * Node state: If $Y=1$, then $X \\to 1$ and $Z = 0$.\n\n2. **$CK = 0$ (Phase 2):**\n   * Stage 1 is **OFF**: $X$ holds its value ($X = 1$).\n   * Stage 2 is **ON**: $Y = \\overline{X} = 0$.\n   * $\\text{Inv}_3$ updates: $Z = \\overline{Y} = 1$.\n\n3. **$CK = 1$ (Phase 3):**\n   * Stage 1 is **ON**: $X = \\overline{Z} = 0$.\n   * Stage 2 is **OFF**: $Y$ holds its value ($Y = 0$).\n   * Node state: $Z = 1$.\n\n4. **$CK = 0$ (Phase 4):**\n   * Stage 1 is **OFF**: $X$ holds its value ($X = 0$).\n   * Stage 2 is **ON**: $Y = \\overline{X} = 1$.\n   * $\\text{Inv}_3$ updates: $Z = \\overline{Y} = 0$. *(Returns to initial state)*\n\n---\n\n#### 3. **Quadrature Analysis**\n* The full period of the output signal ($T_{\\text{out}}$) spans **4 half-cycles of the clock signal**:\n  $$T_{\\text{out}} = 2 \\times T_{CK}$$\n* The signal at node $Y$ changes state one half-clock-cycle ($T_{CK}/2$) after node $X$.\n* This time delay corresponds to a phase shift of:\n  $$\\Delta \\theta = \\frac{T_{CK}/2}{T_{\\text{out}}} \\times 360^\\circ = \\frac{1}{4} \\times 360^\\circ = 90^\\circ$$\n\nSince the signals at nodes $X$ and $Y$ (or $X$ and $Z$) are equal in frequency and phase-shifted by **$90^\\circ$**, the circuit successfully generates **quadrature (I/Q) outputs**.",
        "format": "markdown",
        "sha256": "6afd71bf8f845d85a9e4818ea0d0ff40eacc0d7a5a9fadf92ac884f1162e0872"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature timing, but omits that quadrature is not exact because Inv3 delays Z and the latch outputs have unequal loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 4082,
        "total_tokens": 5166,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3293,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 4082,
        "total_tokens": 5166,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3293,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the structure in the figure provides quadrature outputs.**\n\n---\n\n### **Detailed Explanation:**\n\n1. **Circuit Operation (Divide-by-2 Topology):**\n   - The circuit consists of two clocked inverters (tri-state dynamic latches) connected in a master-slave configuration with negative feedback through inverter $\\text{Inv}_3$.\n   - **Master Stage (Left):** Clocked by $CK = 1$ ($\\overline{CK} = 0$). When $CK = 1$, node $X$ is driven to $\\overline{Z}$. When $CK = 0$, node $X$ holds its state.\n   - **Slave Stage (Middle):** Clocked by $CK = 0$ ($\\overline{CK} = 1$). When $CK = 0$, node $Y$ is driven to $\\overline{X}$ (making $Z = \\overline{Y} = X$). When $CK = 1$, node $Y$ (and thus $Z$) holds its state.\n\n2. **Signal Timing and State Sequence:**\n   If we trace the states at nodes $X$ and $Z$ over clock cycles:\n   - **Phase 1 ($CK = 1$):** $X$ updates to $\\overline{Z}$, while $Z$ holds its state.\n   - **Phase 2 ($CK = 0$):** $Z$ updates to match $X$, while $X$ holds its state.\n   - **Phase 3 ($CK = 1$):** $X$ updates to $\\overline{Z}$, while $Z$ holds its state.\n   - **Phase 4 ($CK = 0$):** $Z$ updates to match $X$, while $X$ holds its state.\n\n   This sequence creates output signals at half the frequency of the input clock ($f_{\\text{out}} = f_{CK} / 2$).\n\n3. **Phase Shift Calculation:**\n   - Node $X$ changes state on the **rising edge** of the clock ($CK \\to 1$).\n   - Node $Z$ changes state on the **falling edge** of the clock ($CK \\to 0$).\n   - The time delay between transitions of $X$ and $Z$ is half of the clock period: $T_{\\text{delay}} = \\frac{T_{CK}}{2}$.\n   - Relative to the period of the output signals ($T_{\\text{out}} = 2 T_{CK}$), the phase difference is:\n     $$\\Delta \\phi = \\frac{T_{\\text{delay}}}{T_{\\text{out}}} \\times 360^\\circ = \\frac{T_{CK} / 2}{2 T_{CK}} \\times 360^\\circ = 90^\\circ$$\n\n### **Conclusion:**\nSince the outputs (such as $X$ and $Z$) operate at $f_{CK}/2$ and are separated by a phase difference of **$90^\\circ$**, the circuit generates **quadrature outputs** (in-phase $I$ and quadrature $Q$).",
        "format": "markdown",
        "sha256": "3bcdf127ec7977a142e0728840edca95d42827e4f9d8a3048f901d0abc047570"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature and the half-input-period timing, but treats the 90° relationship as exact and omits both the Inv3 delay and unequal latch loading that make it inexact.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 3171,
        "total_tokens": 4255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2508,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 3171,
        "total_tokens": 4255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2508,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, increasing the widths of the clocked transistors **improves the speed** (i.e., reduces the propagation delay and increases the maximum operating frequency of the circuit).\n\n---\n\n### **Detailed Explanation**\n\n#### **1. Reduction of ON-Resistance**\n* The clocked transistors ($M_{clock}$) are in series with the data-driven transistors ($M_{data}$) in both the pull-up and pull-down paths of the C$^2$MOS stages.\n* Increasing the gate width ($W_{clock}$) of the clocked transistors reduces their ON-resistance ($R_{on} \\propto \\frac{1}{W_{clock}}$).\n* A lower series resistance allows higher charging and discharging currents when a stage evaluates, thereby speeding up the voltage transitions at the output nodes.\n\n---\n\n#### **2. Position of the Clocked Transistors (Outer vs. Inner)**\n* In this layout, the clocked transistors are placed at the **outer positions** (connected directly to $V_{DD}$ and Ground), while the data transistors are at the **inner positions** (connected directly to the output nodes).\n* Because the clocked transistors are not directly connected to the output nodes:\n  * Increasing their width adds parasitic drain capacitance to the **internal nodes** (the sources of the data transistors), **not** to the critical output nodes.\n\n---\n\n#### **3. Elmore Delay Analysis**\nUsing the Elmore delay model for two series-connected transistors during evaluation:\n\n$$\\tau = R_{clock} C_{internal} + (R_{clock} + R_{data}) C_{out}$$\n\nWhere:\n* $R_{clock} \\propto \\frac{1}{W_{clock}}$\n* $C_{internal} \\propto W_{clock}$\n* $C_{out}$ is the output node capacitance (independent of $W_{clock}$)\n\nSubstituting these proportionalities into the equation:\n$$\\tau \\approx \\left(\\frac{k_1}{W_{clock}}\\right) (k_2 W_{clock}) + \\left(\\frac{k_1}{W_{clock}} + R_{data}\\right) C_{out} = k_1 k_2 + R_{data} C_{out} + \\frac{k_1 C_{out}}{W_{clock}}$$\n\n* The term $R_{clock} C_{internal} = k_1 k_2$ remains approximately constant.\n* The term $\\frac{k_1 C_{out}}{W_{clock}}$ **decreases monotonically** as $W_{clock}$ increases.\n\nTherefore, the total propagation delay $\\tau$ decreases, resulting in **improved speed**.\n\n---\n\n### **Practical Note (Clock Loading)**\nWhile the internal logic stage delay decreases, larger clocked transistors present a larger gate capacitance ($C_g \\propto W_{clock}$) to the clock network ($CK$ and $\\overline{CK}$). If the clock drivers driving $CK$ and $\\overline{CK}$ are fixed/constrained, the slower clock rise/fall times could offset some of the speed gains. However, assuming an adequately sized clock driver, the overall circuit speed **improves**.",
        "format": "markdown",
        "sha256": "88af86fc30d19479e98e1088cb5d0ff35d2729414f48dc9bc12a0449605033ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the outer clocked devices improves speed by reducing series resistance while adding little capacitance at the outputs. It omits the required charge-sharing effect that degrades swing and limits the improvement.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1105,
        "output_tokens": 5243,
        "total_tokens": 6348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4581,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1105,
        "output_tokens": 5243,
        "total_tokens": 6348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4581,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, **the speed improves** (i.e., propagation delay decreases and the maximum operating frequency increases) when the widths of the clocked transistors are increased.\n\n---\n\n### **Detailed Explanation**\n\n1. **Reduction in Series ON-Resistance:**\n   * Each dynamic stage (C$^2$MOS inverter) consists of a pull-up path (two PMOS transistors in series) and a pull-down path (two NMOS transistors in series).\n   * The total equivalent resistance of the pull-up or pull-down network is the sum of the ON-resistances of the signal transistor and the clocked transistor:\n     $$R_{\\text{total}} = R_{\\text{on, signal}} + R_{\\text{on, clock}}$$\n   * Increasing the width of the clocked transistors ($W_{\\text{clock}}$) reduces their ON-resistance ($R_{\\text{on, clock}} \\propto \\frac{1}{W_{\\text{clock}}}$). \n   * This lower overall series resistance increases the charging and discharging currents, which reduces the $RC$ time constant and speeds up signal transitions.\n\n2. **Advantage of Transistor Topology (Outer Placement):**\n   * In this schematic, the clocked transistors are connected directly to the **power rails** ($V_{DD}$ and Ground), while the signal-input transistors are connected to the **output nodes**.\n   * Because the clocked transistors are placed at the outer positions rather than directly at the output node, increasing their width **does not add parasitic drain capacitance directly to the output node**. \n   * As a result, the reduction in series resistance dominates over any minor increase in internal node capacitance.\n\n---\n\n### **Secondary Trade-offs to Consider:**\n* **Clock Network Load:** Increasing $W_{\\text{clock}}$ increases the gate capacitance driven by the clock signals ($CK$ and $\\overline{CK}$). Assuming the clock buffer has sufficient drive capability, the overall internal circuit speed improves.",
        "format": "markdown",
        "sha256": "c0cc347144cc610088cba41599ff300cd3dabebffffb14ff2f3c434ac3beafdf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed because it lowers their series on-resistance and adds little output loading. It omits the charge-sharing effect that degrades swing and limits the benefit, so it does not meet the full-credit rule.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1105,
        "output_tokens": 5477,
        "total_tokens": 6582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5062,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1105,
        "output_tokens": 5477,
        "total_tokens": 6582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5062,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine how increasing the widths of the clocked transistors affects the speed of the circuit (a **$C^2\\text{MOS}$ master-slave toggle flip-flop / divider**), we must consider two competing effects: **series resistance** and **parasitic capacitance**.\n\n---\n\n### 1. Effect on Resistance (Speed Improvement)\n* **Lower On-Resistance ($R_{on}$):** The clocked transistors are connected in series with the input (logic) transistors in each $C^2\\text{MOS}$ inverter branch.\n* As the width ($W_{clk}$) of the clocked transistors increases, their channel resistance decreases:\n  $$R_{on, clk} \\propto \\frac{1}{W_{clk}}$$\n* A smaller $R_{on, clk}$ reduces the total equivalent resistance of the pull-up (PMOS) and pull-down (NMOS) paths ($R_{total} = R_{in} + R_{clk}$), allowing higher current to charge or discharge the output nodes. This **improves the circuit speed (reduces delay)**.\n\n---\n\n### 2. Effect on Capacitance (Speed Degradation)\nIncreasing $W_{clk}$ introduces two main sources of parasitic capacitance:\n1. **Internal Node Parasitic Capacitance ($C_{int}$):** \n   * The drain junction capacitance ($C_{db}$) of the clocked transistor increases linearly with its width ($C_{int} \\propto W_{clk}$).\n   * This extra capacitance at the internal node (between the clocked transistor and the input transistor) must be charged/discharged during signal transitions, which **degrades speed**.\n2. **Clock Line Loading ($C_g$):** \n   * The gate capacitance of the clocked transistors increases linearly ($C_g = C_{ox} W_{clk} L$).\n   * A larger gate capacitance places a heavier load on the clock drivers ($CK$ and $\\overline{CK}$). If the clock driver has a non-zero output impedance, this slows down the clock edge transitions, delaying when the $C^2\\text{MOS}$ stages turn ON/OFF.\n\n---\n\n### 3. Net Summary & Trade-off\n\nThe overall delay $\\tau$ can be approximated by an $RC$ time constant:\n$$\\tau \\approx \\left( R_{in} + \\frac{k_1}{W_{clk}} \\right) \\left( C_{out} + k_2 W_{clk} \\right)$$\n\n* **For small widths ($W_{clk}$):** The high resistance $R_{clk}$ dominates. Increasing $W_{clk}$ significantly reduces $R_{total}$, so **the speed improves**.\n* **For large widths ($W_{clk}$):** $R_{clk}$ becomes negligible compared to $R_{in}$ ($R_{clk} \\ll R_{in}$), but the parasitic capacitance ($C_{int}$ and $C_g$) keeps growing linearly. Therefore, further increasing $W_{clk}$ **degrades the speed**.\n\n### Conclusion\nIncreasing the width of the clocked transistors **improves the speed up to an optimal point**, beyond which further increases **degrade the speed** due to parasitic capacitance and clock loading. Maximum speed is achieved at an **optimal transistor width ($W_{clk, opt}$)**.",
        "format": "markdown",
        "sha256": "c66ccca901d3ddbd3108ee79ccdf731b585ce0ef9331bdb7406bef0b29e358bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that wider clocked devices reduce series on-resistance and improve speed initially. However, it omits charge sharing and overstates internal-node capacitance as a speed-limiting data-path load, rather than noting that the added loading is small and charge sharing mainly degrades swing.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1105,
        "output_tokens": 6974,
        "total_tokens": 8079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1105,
        "output_tokens": 6974,
        "total_tokens": 8079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of the structure, operation, and function of the circuit.\n\n---\n\n### **1. Circuit Identification**\n* **Type:** **Dynamic Frequency Divider by 2** (also known as a **Clock Divide-by-2 Circuit** or **Dynamic Toggle Flip-Flop**).\n* **Components:** \n  * Three inverters ($\\text{Inv}_1$, $\\text{Inv}_2$, and $\\text{Inv}_3$) connected in a ring.\n  * Two complementary switches (pass-gates or transmission gates) controlled by clock signals $CK$ and $\\overline{CK}$.\n\n---\n\n### **2. Principle of Operation**\n\nBecause there are **3 inverters** in the ring (an odd number), the loop provides a net logic inversion (a total $NOT$ operation). The two switches break the ring into two dynamic stages controlled by non-overlapping clock phases.\n\nLet’s trace the logic state assuming the initial voltage at the input of $\\text{Inv}_2$ represents logic **$Q$**:\n\n#### **Phase 1: $CK = 1$ ($\\text{High}$), $\\overline{CK} = 0$ ($\\text{Low}$)**\n1. **Switch $CK$ is CLOSED (ON); Switch $\\overline{CK}$ is OPEN (OFF).**\n2. The input node of $\\text{Inv}_2$ dynamically holds its previous state $Q$ on its gate capacitance.\n3. The signal passes through $\\text{Inv}_2$ and $\\text{Inv}_3$:\n   * Output of $\\text{Inv}_2 = \\overline{Q}$\n   * Output of $\\text{Inv}_3 = Q$\n4. Since switch $CK$ is closed, the output of $\\text{Inv}_3$ ($Q$) is connected to the input of $\\text{Inv}_1$.\n5. Output of $\\text{Inv}_1$ becomes $\\overline{Q}$. \n6. Because switch $\\overline{CK}$ is open, this inverted value ($\\overline{Q}$) is stored on the output capacitance of $\\text{Inv}_1$, waiting to be transferred.\n\n---\n\n#### **Phase 2: $CK = 0$ ($\\text{Low}$), $\\overline{CK} = 1$ ($\\text{High}$)**\n1. **Switch $CK$ is OPEN (OFF); Switch $\\overline{CK}$ is CLOSED (ON).**\n2. The value stored at the output of $\\text{Inv}_1$ ($\\overline{Q}$) passes through switch $\\overline{CK}$ to the input of $\\text{Inv}_2$.\n3. The input of $\\text{Inv}_2$ changes from $Q \\to \\overline{Q}$.\n4. The outputs of the following inverters update accordingly:\n   * Output of $\\text{Inv}_2 = Q$\n   * Output of $\\text{Inv}_3 = \\overline{Q}$\n5. Since switch $CK$ is open, this new state ($\\overline{Q}$) is blocked from reaching $\\text{Inv}_1$ until the next clock cycle.\n\n---\n\n#### **Phase 3: Next Clock Cycle ($CK = 1$, $\\overline{CK} = 0$)**\n1. Switch $CK$ closes again, feeding the updated state $\\overline{Q}$ into $\\text{Inv}_1$.\n2. The output of $\\text{Inv}_1$ toggles back to $Q$.\n\n---\n\n### **3. Key Takeaways & Summary**\n\n* **Toggling Action:** For every full period of the clock signal ($CK$), the internal logic state toggles once.\n* **Frequency Division:** It takes **2 full clock cycles** for any node in the circuit to complete one full high-to-low-to-high transition cycle. Thus, the output frequency is exactly half of the clock frequency:\n  $$f_{\\text{out}} = \\frac{f_{CK}}{2}$$\n* **Logic Type:** This is a **dynamic circuit** because it relies on parasitic node capacitance to temporarily hold logic levels while the switches are open.",
        "format": "markdown",
        "sha256": "a2c8e1f2b8ce74697e6cfb34f1fafc314daa4df693fbfb759d2a0044ca45c099"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic divide-by-two circuit and explains that its output runs at half the clock frequency. The detailed internal signal tracing is not required for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 3551,
        "total_tokens": 4651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2669,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 3551,
        "total_tokens": 4651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2669,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of the arrangement:\n\n---\n\n### **1. Identification of the Circuit**\nThis arrangement is a **Dynamic Divide-by-2 Frequency Divider** (also known as a **Dynamic Master-Slave Toggle Flip-Flop** configured with $D = \\overline{Q}$). \n\nIt uses **dynamic logic** (storing logic levels on gate capacitance during clock phases) and a **master-slave topology** with 3 inverters in total arranged in a negative feedback loop.\n\n---\n\n### **2. Circuit Structure**\n\nThe circuit consists of two main stages operating on complementary clock signals ($CK$ and $\\overline{CK}$):\n\n* **Master Stage:** \n  * Switch controlled by $CK$\n  * Inverter 1 ($\\text{Inv}_1$)\n* **Slave Stage:** \n  * Switch controlled by $\\overline{CK}$\n  * Inverter 2 and Inverter 3\n* **Feedback Loop:** \n  * The output of Inverter 3 is routed back to the input switch ($CK$).\n\n---\n\n### **3. Detailed Step-by-Step Operation**\n\nLet's trace the signal through the dynamic nodes:\n* **Node $A$**: Input of $\\text{Inv}_1$ (after switch $CK$)\n* **Node $B$**: Output of $\\text{Inv}_1$ (before switch $\\overline{CK}$)\n* **Node $C$**: Input of Inverter 2 (after switch $\\overline{CK}$)\n* **Node $D$**: Output of Inverter 2 / Input of Inverter 3\n* **Node $E$**: Output of Inverter 3 (Feedback signal)\n\n#### **Phase 1: $CK = 1, \\overline{CK} = 0$ (Master Sample, Slave Hold)**\n1. **Switch $CK$ is CLOSED (ON)**, and **Switch $\\overline{CK}$ is OPEN (OFF)**.\n2. The current state of Node $E$ is sampled into Node $A$ ($A = E$).\n3. Inverter 1 computes the inverse: $B = \\overline{E}$.\n4. Since Switch $\\overline{CK}$ is open, Node $C$ remains isolated and **holds its previous logic state dynamically** via gate capacitance. The slave stage output $E$ does not change during this phase.\n\n#### **Phase 2: $CK = 0, \\overline{CK} = 1$ (Master Hold, Slave Transfer & Toggle)**\n1. **Switch $CK$ is OPEN (OFF)**, and **Switch $\\overline{CK}$ is CLOSED (ON)**.\n2. Node $A$ holds its sampled value dynamically.\n3. The inverted value at Node $B$ ($\\overline{E_{\\text{old}}}$) transfers to Node $C$ ($C = \\overline{E_{\\text{old}}}$).\n4. Signal propagates through the slave stage:\n   * Node $D = \\overline{C} = E_{\\text{old}}$\n   * Node $E = \\overline{D} = \\overline{E_{\\text{old}}}$\n5. Thus, the output node $E$ **toggles** to its opposite state at the falling edge of $CK$.\n\n---\n\n### **4. Waveform & Frequency Analysis**\n\n| Clock Phase | $CK$ | $\\overline{CK}$ | Node $A$ | Node $B$ | Node $C$ | Output (Node $E$) |\n| :---: | :---: | :---: | :---: | :---: | :---: | :---: |\n| **Initial** | 0 | 1 | — | — | 0 | **0** |\n| **Cycle 1 (Phase 1)** | 1 | 0 | 0 | 1 | 0 (held) | **0** |\n| **Cycle 1 (Phase 2)** | 0 | 1 | 0 (held) | 1 | 1 | **1** *(Toggled)* |\n| **Cycle 2 (Phase 1)** | 1 | 0 | 1 | 0 | 1 (held) | **1** |\n| **Cycle 2 (Phase 2)** | 0 | 1 | 1 (held) | 0 | 0 | **0** *(Toggled)* |\n\n* The output signal toggles once per clock cycle (on the falling edge of $CK$).\n* **1 full output period** requires **2 full clock cycles**.\n\nTherefore, the output frequency $f_{\\text{out}}$ is exactly half of the clock frequency $f_{CK}$:\n$$f_{\\text{out}} = \\frac{f_{CK}}{2}$$\n\n---\n\n### **5. Summary**\n\n* **Function:** Frequency Divider (Divide-by-2) / Prescaler / T-Flip-Flop.\n* **Working Principle:** Dynamic Master-Slave flip-flop with odd-inverter negative feedback (3 inversions in total).\n* **Key Characteristic:** Requires continuous clocking to prevent charge leakage at dynamic storage nodes ($A$ and $C$).",
        "format": "markdown",
        "sha256": "3d19e458357444041391aa4afd3cd5db16b231f6de7ff536ee15566047e9eb3e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic master-slave divide-by-two and states that the output frequency is half the clock frequency. Internal inverter-path details are secondary under the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 5280,
        "total_tokens": 6380,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 5280,
        "total_tokens": 6380,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed step-by-step analysis of the arrangement:\n\n---\n\n### **1. Circuit Identification**\n\nThis circuit is a **Dynamic Frequency Divider (Divide-by-2 Circuit)** or **Dynamic Toggle Flip-Flop (T-FF)**. \n\nIt consists of:\n* **3 Inverters** ($\\text{Inv}_1$, $\\text{Inv}_2$, $\\text{Inv}_3$) connected in series in a closed loop.\n* **2 Clock-controlled Switches** driven by complementary clock signals ($CK$ and $\\overline{CK}$):\n  * **Switch 1** ($CK$) is placed before $\\text{Inv}_1$.\n  * **Switch 2** ($\\overline{CK}$) is placed between $\\text{Inv}_1$ and $\\text{Inv}_2$.\n\nBecause it uses dynamic charge storage on node capacitances during switch isolation, it operates as a **master-slave dynamic register with inverted feedback**.\n\n---\n\n### **2. Node Definitions**\n\nTo trace the signal flow, let us label the key internal nodes:\n* **$N_1$**: Input to $\\text{Inv}_1$ (after switch $CK$)\n* **$N_2$**: Output of $\\text{Inv}_1$ (before switch $\\overline{CK}$)\n* **$N_3$**: Input to $\\text{Inv}_2$ (after switch $\\overline{CK}$)\n* **$N_4$**: Output of $\\text{Inv}_2$ / Input to $\\text{Inv}_3$\n* **$N_5$**: Output of $\\text{Inv}_3$ (fed back to switch $CK$)\n\n---\n\n### **3. Operational Analysis (Clock Phase Dynamics)**\n\n#### **Phase 1: $CK = 1$ ($\\overline{CK} = 0$) — Master Sampling Phase**\n1. **Switch $CK$ is CLOSED (ON)**; **Switch $\\overline{CK}$ is OPEN (OFF)**.\n2. Node $N_3$ is isolated (floating) and dynamically holds its previous state, say $Q$, on its parasitic capacitance ($N_3 = Q$).\n3. The state $Q$ propagates through $\\text{Inv}_2$ and $\\text{Inv}_3$:\n   * $N_4 = \\overline{Q}$\n   * $N_5 = \\overline{\\overline{Q}} = Q$\n4. Since Switch $CK$ is closed, node $N_5$ drives node $N_1$:\n   * $N_1 = N_5 = Q$\n5. Inverter $\\text{Inv}_1$ inverts this value at $N_2$:\n   * $N_2 = \\overline{Q}$\n\n---\n\n#### **Phase 2: $CK = 0$ ($\\overline{CK} = 1$) — Slave Transfer Phase**\n1. **Switch $CK$ is OPEN (OFF)**; **Switch $\\overline{CK}$ is CLOSED (ON)**.\n2. Node $N_1$ is isolated and dynamically holds state $Q$. Inverter $\\text{Inv}_1$ maintains $N_2 = \\overline{Q}$.\n3. Since Switch $\\overline{CK}$ is closed, node $N_2$ charges/discharges node $N_3$:\n   * $N_3 \\leftarrow N_2 = \\overline{Q}$\n4. The signal at $N_3$ has now **inverted** relative to Phase 1.\n5. Consequently, $N_4$ becomes $Q$ and $N_5$ becomes $\\overline{Q}$.\n\n---\n\n### **4. State Sequence across Clock Cycles**\n\nAssuming initial state at node $N_3 = 0$:\n\n| Clock Phase | $CK$ State | $N_3$ (Input $\\text{Inv}_2$) | $N_5$ (Feedback) | $N_1$ (Input $\\text{Inv}_1$) | $N_2$ (Output $\\text{Inv}_1$) |\n| :--- | :---: | :---: | :---: | :---: | :---: |\n| **Cycle 1, Phase 1** | $CK = 1$ | **0** (holds) | 0 | 0 | 1 |\n| **Cycle 1, Phase 2** | $CK = 0$ | **1** (updated) | 1 | 0 (holds) | 1 |\n| **Cycle 2, Phase 1** | $CK = 1$ | **1** (holds) | 1 | 1 | 0 |\n| **Cycle 2, Phase 2** | $CK = 0$ | **0** (updated) | 0 | 1 (holds) | 0 |\n\n---\n\n### **5. Key Conclusions & Characteristics**\n\n1. **Frequency Division ($f_{out} = f_{clk} / 2$):** \n   * It takes **2 full clock cycles** for the node states to complete one full high-to-low-to-high oscillation cycle. Thus, the output frequency at any node is half the clock frequency.\n\n2. **Master-Slave Dynamic Storage:**\n   * Nodes $N_1$ and $N_3$ act as dynamic storage nodes relying on input gate capacitances of the inverters.\n\n3. **Minimum Operating Frequency ($f_{min}$):**\n   * Due to dynamic charge leakage at the floating nodes ($N_1$ and $N_3$) during the OFF states of the switches, the clock frequency must remain above a minimum threshold ($f_{min}$) to prevent data corruption.\n\n4. **Race-Condition Immunity:**\n   * The two non-overlapping clock switches ($CK$ and $\\overline{CK}$) prevent signal race-through, ensuring stable logic state transitions.",
        "format": "markdown",
        "sha256": "b71b42af1e612be2da1a8b770ea587761a7d956b92ac84bd0be283017eb00063"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a divide-by-two using dynamic latches and explains the half-rate output; the detailed internal signal naming is secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 5487,
        "total_tokens": 6587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 5487,
        "total_tokens": 6587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The effect of the red inverter on the circuit's performance depends on how the clock signals ($CK$ and $\\overline{CK}$) are operated. This circuit topology represents a **dynamic frequency divider / toggle flip-flop** (or a clocked ring oscillator) consisting of 3 main forward inverters ($\\text{Inv}_1, \\text{Inv}_2, \\text{Inv}_3$) and two complementary switches ($CK$ and $\\overline{CK}$).\n\n---\n\n### 1. Logic Contention and Signal Conflict (Primary Effect)\n* **During the clock phase when $\\overline{CK} = 1$ and $CK = 0$:**\n  * The switch $\\overline{CK}$ is closed, so the output of $\\text{Inv}_1$ propagates through $\\text{Inv}_2$ and $\\text{Inv}_3$.\n  * Since $\\text{Inv}_2$ and $\\text{Inv}_3$ together act as a non-inverting buffer (2 inversions), the output of $\\text{Inv}_3$ has the **same logic level** as the output of $\\text{Inv}_1$.\n  * Simultaneously, the **red inverter** takes the output of $\\text{Inv}_1$ and inverts it, producing the **opposite logic level**.\n  * Both the output of $\\text{Inv}_3$ and the output of the red inverter drive the **same node** (the node before switch $CK$). \n  * **Result:** The two inverters fight each other (logic contention), driving the node to an intermediate voltage around $V_{DD}/2$.\n\n---\n\n### 2. Impact on Key Performance Metrics\n\n1. **Circuit Failure / Incorrect Toggling:**\n   * Because of the contention at the node before switch $CK$, the voltage fed to $\\text{Inv}_1$ when $CK$ closes is poorly defined (near $V_{DD}/2$). This can prevent the flip-flop from toggling correctly or cause state corruption.\n\n2. **Increased Power Dissipation:**\n   * The contention between $\\text{Inv}_3$ (pulling high/low) and the red inverter (pulling low/high) creates a direct low-impedance short-circuit path between $V_{DD}$ and $GND$ (crowbar current), dramatically increasing static power consumption.\n\n3. **Reduced Maximum Operating Frequency ($f_{\\text{max}}$):**\n   * The red inverter adds extra capacitive loading to the output of $\\text{Inv}_1$ and to the input node of switch $CK$. \n   * The time required to overcome the opposing drive during transitions increases propagation delay, significantly lowering $f_{\\text{max}}$.\n\n4. **Staticization / Charge Leakage Prevention (If designed as a weak keeper):**\n   * When switch $CK$ is closed ($CK = 1$), $\\text{Inv}_1$ and the red inverter form a **positive feedback loop** (a cross-coupled latch pair). \n   * If the red inverter is intentionally sized to be **weak** (a keeper), it converts the dynamic storage node of $\\text{Inv}_1$ into a **static storage node**, allowing the circuit to operate reliably at very low clock frequencies ($f_{\\text{min}} \\to 0\\text{ Hz}$) by preventing dynamic charge leakage. However, it still slows down state transitions during updates.\n\n---\n\n### Summary\n* **Without the red inverter:** The circuit is a purely dynamic frequency divider (fast, but suffers from charge leakage at low frequencies).\n* **With the red inverter:** It introduces positive feedback (static retention) around $\\text{Inv}_1$, but causes **severe contention** with $\\text{Inv}_3$ during clock transitions, leading to **increased power consumption**, **higher propagation delay**, and potential **toggling failure** if the red inverter is not properly ratioed/weakened.",
        "format": "markdown",
        "sha256": "0043295ba57182db952b7b899370662a364c79691d6ae81bfd63e13d518d8927"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a keeper and places its contention at the wrong node. It misses the feedforward speed benefit and reverses the key low-frequency result: the unclocked branch raises the minimum usable frequency rather than enabling operation down to zero.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 11494,
        "total_tokens": 12573,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10671,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 11494,
        "total_tokens": 12573,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10671,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The addition of the **red inverter** affects the circuit's performance in several key ways:\n\n---\n\n### 1. **Reduces Propagation Delay & Increases Speed (Frequency)**\n* **Bypasses Switch Resistance:** The transmission switch ($CK$) introduces an ON-resistance ($R_{ON}$) that creates an $RC$ delay when driving the input of $\\text{Inv}_1$. The red inverter takes its input directly **before** switch $CK$, bypassing this switch resistance entirely.\n* **Reduces Loop Delay:** By eliminating the $RC$ lag of switch $CK$, the overall propagation delay through the stage is reduced, allowing the circuit (e.g., a ring oscillator or dynamic loop) to operate at a **higher frequency / speed**.\n\n---\n\n### 2. **Increases Current Driving Capability (Parallel Drive)**\n* When switch $CK$ is closed ($CK = \\text{HIGH}$):\n  * Both $\\text{Inv}_1$ and the **red inverter** receive the same signal and drive the node at the output of $\\text{Inv}_1$ in parallel.\n* Combining the two inverters increases the total transconductance ($g_m$) and driving current. This produces **sharper rise/fall transition times** (faster edge rates) at the output node.\n\n---\n\n### 3. **Prevents Floating Nodes & Eliminates Dynamic Leakage**\n* When switch $CK$ is open ($CK = \\text{LOW}$):\n  * **Without the red inverter:** The input to $\\text{Inv}_1$ becomes a floating high-impedance (dynamic) node, making the output susceptible to charge leakage, noise, and voltage drift.\n  * **With the red inverter:** A deterministic, active static path exists from the feedback line to the output node even when switch $CK$ is open. This maintains signal integrity and prevents floating-node issues.\n\n---\n\n### Summary of Performance Impact\n\n| Parameter | Without Red Inverter | With Red Inverter |\n| :--- | :--- | :--- |\n| **Stage Delay** | Higher (includes switch $R_{ON}C$ delay) | **Lower** (bypasses switch $R_{ON}$) |\n| **Max Operating Speed** | Lower | **Higher** |\n| **Driving Strength** | Single Inverter ($\\text{Inv}_1$) | **Double / Parallel Inverters** |\n| **Sensitivity to Noise / Leakage** | High (floating node when $CK$ is OFF) | **Low** (continuous active drive) |",
        "format": "markdown",
        "sha256": "adca5d68695ca0ffd2b92ae82b90efcf8a8551d15c137789aea9261686836ec0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the feedforward bypass and its high-speed benefit, but wrongly presents the unclocked branch as preventing floating-node problems. It can instead overpower the main path or form a toggling loop at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 5336,
        "total_tokens": 6415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 5336,
        "total_tokens": 6415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The addition of the **red inverter** in the given circuit significantly impacts its functionality, speed, and reliability. \n\nHere is a detailed breakdown of how the red inverter affects the performance of the circuit:\n\n---\n\n### 1. **Completes the Feedback Loop during $CK = 0$ ($\\overline{CK} = 1$)**\n* **Without the red inverter:** When $CK = 0$ ($\\overline{CK} = 1$), switch $CK$ is open. The input to $\\text{Inv}_1$ becomes disconnected/floating, breaking the feedback path. As a result, the loop cannot propagate signals.\n* **With the red inverter:** The red inverter bypasses switch $CK$ and $\\text{Inv}_1$. When $CK = 0$, switch $\\overline{CK}$ is closed, allowing the red inverter to complete a **3-stage ring oscillator loop** ($\\text{Red Inverter} \\rightarrow \\text{Inv}_2 \\rightarrow \\text{Inv}_3$). This enables continuous signal propagation and oscillation during the $\\overline{CK} = 1$ clock phase.\n\n---\n\n### 2. **Eliminates Floating Nodes (Static Operation)**\n* **Without the red inverter:** When switch $CK$ is open, the input of $\\text{Inv}_1$ is left floating, making the node dynamic and susceptible to:\n  * Charge leakage.\n  * Subthreshold leakage currents.\n  * External noise and crosstalk.\n* **With the red inverter:** The output node of $\\text{Inv}_1$ is actively driven at all times by the red inverter directly from the output of $\\text{Inv}_3$. This converts dynamic node behavior into **fully static operation**, greatly improving **noise immunity and reliability**.\n\n---\n\n### 3. **Boosts Drive Strength and Speed during $CK = 1$ ($\\overline{CK} = 0$)**\n* When $CK = 1$, switch $CK$ is closed while switch $\\overline{CK}$ is open.\n* In this phase, both $\\text{Inv}_1$ and the **red inverter operate in parallel** to drive the node between $\\text{Inv}_1$ and switch $\\overline{CK}$.\n* **Effects:**\n  * **Higher Equivalent Transconductance ($g_m$):** Effectively doubles (or increases) the current driving capability.\n  * **Faster Rise/Fall Times:** Accelerates the charging and discharging of the parasitic capacitance at that internal node.\n  * **Pre-charging/Pre-setting:** Ensures the node rapidly reaches a solid logic high or low level before switch $\\overline{CK}$ closes on the next clock transition, reducing propagation delay.\n\n---\n\n### Summary of Performance Improvements\n| Parameter | Impact of Red Inverter |\n| :--- | :--- |\n| **Loop Continuity** | Allows oscillation/signal propagation during $CK = 0$. |\n| **Switching Speed** | Faster node transition times due to parallel driving during $CK = 1$. |\n| **Noise Immunity** | Prevents high-impedance (floating) nodes, reducing noise susceptibility. |\n| **Propagation Delay** | Reduces overall loop delay by bypassing switch $CK$'s series resistance. |",
        "format": "markdown",
        "sha256": "9ec103af121ceba507cbec07d8cb4e2141a707a01039c6efa0cdbf3747b02232"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the feedforward bypass and its speed benefit, but misses the key low-frequency drawback: the unclocked loop can corrupt division and raises the minimum usable clock frequency. It instead presents the oscillation and supposed static/noise benefits as improvements.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 5644,
        "total_tokens": 6723,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4962,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 5644,
        "total_tokens": 6723,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4962,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I do not agree with that answer.** \n\nThe statement is incorrect for several reasons regarding both how dynamic keepers work and how this specific circuit behaves.\n\n---\n\n### Why it does NOT act as a keeper (and does not remove the leakage requirement)\n\n1. **Incorrect Output Connection:** \n   For an inverter to act as a \"keeper\" (converting a dynamic node into a static one to prevent charge leakage), its output **must be connected directly to the storage node**—i.e., **after** switch $CK$, directly at the input of $\\text{Inv}_1$.\n   - In the given schematic, the red inverter's output is connected **before** switch $CK$ (to the left of the switch).\n   - When $CK = 0$ (switch $CK$ is open), the input of $\\text{Inv}_1$ is completely isolated from the red inverter. The input node of $\\text{Inv}_1$ is left floating, meaning its stored charge will still leak away over time.\n\n2. **Unprotected Second Dynamic Node:**\n   When $\\overline{CK} = 0$ (switch $\\overline{CK}$ is open), the input to $\\text{Inv}_2$ is also a floating dynamic node with no feedback path to maintain its voltage.\n\nBecause dynamic nodes remain isolated during the off-phases of the clock switches, **this circuit still requires a minimum clock frequency** to prevent data loss due to leakage.\n\n---\n\n### What the red inverter ACTUALLY does\n\nInstead of acting as a proper keeper, the red inverter introduces two distinct behaviors depending on the clock phase:\n\n#### 1. During $\\overline{CK} = 1$ ($CK = 0$): **Severe Logic Contention**\n- The output of $\\text{Inv}_1$ passes through closed switch $\\overline{CK}$ into $\\text{Inv}_2$ and then $\\text{Inv}_3$. \n- Since it passes through two inverters ($\\text{Inv}_2$ and $\\text{Inv}_3$), the signal is inverted twice, so the output of $\\text{Inv}_3$ has the **same** logic state as the output of $\\text{Inv}_1$.\n- At the same time, the red inverter takes the output of $\\text{Inv}_1$ and inverts it **once**, producing the **opposite** logic state.\n- Both the output of $\\text{Inv}_3$ and the output of the red inverter are tied to the exact same wire (to the left of switch $CK$). \n- **Result:** The red inverter and $\\text{Inv}_3$ actively drive the same node to opposite voltage levels (one pulling to $V_{DD}$, the other to $GND$), causing **direct logic contention**, high short-circuit current, and intermediate/corrupted voltage levels.\n\n#### 2. During $CK = 1$ ($\\overline{CK} = 0$): **Local Latch Formation**\n- Switch $CK$ is closed while switch $\\overline{CK}$ is open.\n- $\\text{Inv}_1$ and the red inverter form a closed 2-inverter loop through switch $CK$, creating a bistable positive-feedback latch that holds its state during this phase.\n\n---\n\n### Summary / Correct Implementation\nTo function properly as a keeper, the red inverter's output would need to be moved **after switch $CK$** (directly to the input of $\\text{Inv}_1$), and it should ideally be a **weak (scaled-down) inverter** so that incoming signals driving the node through switch $CK$ can easily override it.",
        "format": "markdown",
        "sha256": "daab8142d12465ce73aeae969fd4db832d387064816b2519f4f1e4d6cc78f32b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper claim and says a minimum clock frequency remains, but reverses the red inverter’s connections and invents contention and latch behavior. It misses the actual feedforward bypass and its high-speed benefit/low-frequency failure tradeoff.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 9713,
        "total_tokens": 10839,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8942,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 9713,
        "total_tokens": 10839,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8942,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I do not agree with that answer.** \n\nThe statement is incorrect both in its description of the circuit topology and its analysis of how the circuit functions.\n\n---\n\n### Why the Answer is Incorrect\n\n1. **It is NOT a cross-coupled latch / keeper:**\n   * A cross-coupled keeper requires a back-to-back connection with $\\text{Inv}_1$: the output of $\\text{Inv}_1$ must drive the keeper’s input, and the keeper’s output must drive $\\text{Inv}_1$’s input (the node after the $CK$ switch).\n   * In this figure, the red inverter’s output is connected to the **same node** as $\\text{Inv}_1$’s output, and its input is connected to the line **before** the $CK$ switch. \n   * This means the red inverter is in **parallel** with $\\text{Inv}_1$ (when $CK$ is closed), rather than cross-coupled with it.\n\n2. **It does NOT eliminate the minimum clock frequency (leakage) requirement:**\n   * When the $CK$ switch opens, the node at the input of $\\text{Inv}_1$ remains completely floating (dynamic). The red inverter has no connection to $\\text{Inv}_1$'s input, so it does not hold charge or prevent leakage at that dynamic node.\n\n---\n\n### What is the Actual Role of the Red Inverter?\n\nInstead of stabilizing the circuit, the red inverter severely disrupts its intended operation:\n\n* **When $CK$ is LOW and $\\overline{CK}$ is HIGH:**\n  1. The $CK$ switch is **OPEN**, isolating the input of $\\text{Inv}_1$.\n  2. The $\\overline{CK}$ switch is **CLOSED**.\n  3. The feedback path now goes:  \n     $$\\text{Red Inverter} \\longrightarrow (\\overline{CK} \\text{ switch}) \\longrightarrow \\text{2nd Inverter} \\longrightarrow \\text{3rd Inverter} \\longrightarrow \\text{Red Inverter}$$\n  4. This forms a closed loop containing **3 inverters in series** (an odd number).\n\n* **Result:**  \n  During the phase when $\\overline{CK}$ is high, the circuit turns into an **unconstrained 3-stage ring oscillator**. Rather than operating as a stable latch/divider, it will freely oscillate and cause logic failure.\n\n---\n\n### How a Proper Keeper Should Be Connected\nIf the goal were to form a static keeper to prevent leakage:\n* The red inverter's **input** should be connected to the output of $\\text{Inv}_1$ (before the $\\overline{CK}$ switch).\n* The red inverter's **output** should be connected to the input of $\\text{Inv}_1$ (after the $CK$ switch).",
        "format": "markdown",
        "sha256": "83f09d1355ea33c2f2cb5838b9cf07802a33009f07fd9944b61f4838fe75b7d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the three-inverter loop, but misses the red inverter’s essential feedforward role and its speed tradeoff. It also overstates the loop as freely oscillating and causing failure rather than explaining that it can disrupt operation at low clock rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 6335,
        "total_tokens": 7461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5724,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 6335,
        "total_tokens": 7461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5724,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I do not agree with that answer.** \n\nWhile the red inverter was likely *intended* by the designer to act as a static keeper, its **placement in this schematic is incorrect**, making the statement false in practice.\n\n---\n\n### 1. Why the Statement is Incorrect\n\n1. **It fails to protect `Inv1` from leakage when `CK` is open ($CK = 0$):**\n   * For a keeper to eliminate minimum clock frequency requirements, it must continuously hold the charge on the dynamic storage node (the input of `Inv1`).\n   * In the schematic, the output of the red inverter is connected **before** (to the left of) the `CK` switch. \n   * When $CK = 0$, the `CK` switch is **open**, isolating `Inv1`'s input from the red inverter. Thus, `Inv1`'s input remains a floating dynamic node vulnerable to charge leakage.\n\n2. **It creates severe signal contention during $\\overline{CK} = 1$:**\n   * Without the red inverter, this circuit acts as a **divide-by-2 frequency divider (toggle flip-flop)**. \n   * When $\\overline{CK} = 1$ (and $CK = 0$), the signal propagates through `Inv1` $\\rightarrow$ `Inv2` $\\rightarrow$ `Inv3`, causing `Inv3` to output the **toggled (inverted)** logic state back to the node before the `CK` switch.\n   * At the same time, the red inverter takes its input from the output of `Inv1` and outputs the **old (untoggled)** logic state to that exact same node.\n   * As a result, `Inv3` and the red inverter actively drive **opposite logic levels onto the same wire**, creating severe bus contention (short-circuit current between $V_{DD}$ and $GND$). This prevents the circuit from toggling correctly.\n\n---\n\n### 2. Actual Role / Effect of the Red Inverter in this Circuit\n\nIn its current configuration, the red inverter:\n* **Fails as a keeper**, because it cannot hold the dynamic input of `Inv1` when $CK = 0$.\n* **Disrupts the circuit operation**, by fighting against the feedback from `Inv3` during the $\\overline{CK} = 1$ phase, causing logic contention and high static power consumption.\n\n---\n\n### How to Correct the Circuit\n\nTo make the red inverter function as a proper keeper without breaking the circuit:\n1. **Move its output connection** to the node **after** the `CK` switch (directly to the input of `Inv1`).\n2. **Make it a weak inverter** (or a tri-stated inverter controlled by $\\overline{CK}$) so that new incoming data can easily overdrive it when $CK = 1$.",
        "format": "markdown",
        "sha256": "c489231e8913a877c45e62fc8bcb861aa83c02d43f4ba3911c2735ff456e0a3c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper interpretation, but reverses the red inverter’s connections and therefore misses its actual feedforward role. The claimed direct contention with Inv3 and conclusion that the circuit cannot toggle are incorrect; it also misses the high-speed benefit and low-frequency tradeoff.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 9419,
        "total_tokens": 10545,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8810,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 9419,
        "total_tokens": 10545,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8810,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the **Noise Figure (NF)** of the inverter-based shunt-feedback Low-Noise Amplifier (LNA) shown in the figure while keeping $R_{in} = 50\\,\\Omega$, we must analyze how the circuit parameters affect both the input impedance and the noise sources.\n\n---\n\n### 1. Mathematical Analysis\n\n#### **Input Resistance ($R_{in}$):**\nThe input resistance looking into the gate (assuming an effective load resistance $R_L = r_{o1} \\parallel r_{o2}$ at the output) is given by:\n$$R_{in} \\approx \\frac{R_F + R_L}{1 + G_m R_L}$$\n\nwhere $G_m = g_{m1} + g_{m2}$ is the combined transconductance of $M_1$ and $M_2$. \n\nTo maintain a matched input resistance ($R_{in} = R_S = 50\\,\\Omega$), the feedback resistance $R_F$ must satisfy:\n$$R_F = R_S + R_L (G_m R_S - 1)$$\n\n#### **Noise Factor ($F$):**\nThe total Noise Factor $F$ of this amplifier can be expressed as:\n$$F \\approx 1 + \\frac{R_S}{R_F} + \\frac{\\gamma}{G_m R_S}$$\n\nwhere $\\gamma$ is the MOSFET channel thermal noise coefficient ($\\approx 2/3$ to $1.3$).\n\n---\n\n### 2. Optimization Strategies\n\nTo minimize the Noise Figure ($NF = 10 \\log_{10} F$) while keeping $R_{in} = 50\\,\\Omega$:\n\n#### **A. Increase the Transconductance ($G_m = g_{m1} + g_{m2}$)**\n* **Mechanism:** Increasing the width ($W_1, W_2$) of the transistors or increasing the bias current increases $G_m$.\n* **Effect on NF:** A larger $G_m$ directly reduces the transistor channel thermal noise contribution ($\\frac{\\gamma}{G_m R_S}$).\n\n#### **B. Increase the Feedback Resistance ($R_F$) Simultaneously**\n* **Mechanism:** As $G_m$ is increased, $R_F$ **must be increased proportionally** according to $R_F \\approx G_m R_S R_L$ to maintain $R_{in} = 50\\,\\Omega$.\n* **Effect on NF:** A larger $R_F$ decreases its thermal current noise contribution ($\\frac{R_S}{R_F}$), further lowering the NF.\n\n#### **C. Leverage Current Reuse (NMOS + PMOS)**\n* The complementary inverter configuration naturally reuses the DC bias current through both $M_1$ and $M_2$. \n* This provides **twice the total transconductance** ($G_m = g_{m1} + g_{m2}$) for a given power consumption compared to a single-transistor CS stage, inherently improving NF.\n\n#### **D. Optimize the Width Ratio ($W_2 / W_1$)**\n* Size the PMOS ($M_2$) and NMOS ($M_1$) such that:\n  $$\\frac{W_2}{W_1} \\approx \\frac{\\mu_n}{\\mu_p} \\approx 2 \\text{ to } 3$$\n* This balances $g_{m1} \\approx g_{m2}$ and sets the DC self-bias point at approximately $V_{DD}/2$, maximizing signal swing, linearity, and total $G_m$.\n\n---\n\n### 3. Practical Trade-offs & Limitations\n\n1. **Gate Capacitance ($C_{gs}$):**\n   * As device widths ($W_1, W_2$) are made larger to boost $G_m$, the total gate capacitance $C_{gs,total} = C_{gs1} + C_{gs2}$ increases.\n   * At high frequencies, $C_{gs}$ shunts the input node, reducing $|Z_{in}|$ below $50\\,\\Omega$ and degrading NF. Device sizing must be capped before capacitive shunting dominates.\n\n2. **Power Consumption:**\n   * Boosting $G_m$ requires higher DC current and/or larger device sizes, trading off power consumption for lower NF.\n\n---\n\n### Summary of Design Steps\n1. **Increase $W_1$ and $W_2$** (keeping $W_2/W_1 \\approx 2\\text{--}3$) to maximize $G_m = g_{m1} + g_{m2}$.\n2. **Increase $R_F$** in tandem to keep $R_{in} = \\frac{R_F + R_L}{1 + G_m R_L} = 50\\,\\Omega$.\n3. Stop sizing up $W_1, W_2$ once input capacitance ($C_{gs}$) begins to noticeably degrade $Z_{in}$ at the target operating frequency.",
        "format": "markdown",
        "sha256": "1a512f2fc7c9a00306767bad535213f48e2d3a97c8583476af3cea236bad556a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Uses the finite-output-resistance input-match relation and correctly adjusts RF as gm increases, allowing the matched design to reduce both transistor and feedback-resistor noise. This captures the key optimization; the additional sizing and trade-off discussion does not undermine it.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 7622,
        "total_tokens": 8739,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6528,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 7622,
        "total_tokens": 8739,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6528,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the **Noise Figure (NF)** of the inverter-based shunt-feedback Low-Noise Amplifier (LNA) shown in the figure while maintaining an input impedance of $R_{in} = 50\\ \\Omega$, we must analyze how the circuit parameters affect both $R_{in}$ and the total noise.\n\n---\n\n### 1. Small-Signal Model and Input Impedance Constraint\n\nThe circuit consists of a complementary common-source inverter ($M_1$ NMOS and $M_2$ PMOS) with a feedback resistor $R_F$. \n\n- **Total Transconductance ($g_m$):** Both transistors are driven by the input signal, so the total transconductance is:\n  $$g_m = g_{m1} + g_{m2}$$\n- **Output Resistance ($r_o$):** The combined output resistance is:\n  $$r_o = r_{o1} \\parallel r_{o2}$$\n\nThe input impedance $R_{in}$ looking into the node after $C_1$ is given by:\n$$R_{in} = \\frac{R_F + r_o}{1 + g_m r_o}$$\n\nTo maintain $R_{in} = R_s = 50\\ \\Omega$, we solve for the feedback resistor $R_F$:\n$$R_F = R_s (1 + g_m r_o) - r_o = R_s + r_o (g_m R_s - 1)$$\n\n---\n\n### 2. Noise Figure (NF) Expression\n\nThe Noise Factor $F$ of this shunt-feedback LNA can be approximated as:\n$$F \\approx 1 + \\frac{\\gamma}{g_m R_s} + \\frac{R_s}{R_F}$$\n\nwhere $\\gamma$ is the MOSFET channel thermal noise coefficient ($\\gamma \\approx 2/3$ for long-channel devices, higher for short-channel devices).\n\nFrom this expression, there are two main noise contributors to minimize:\n1. **Transistor channel thermal noise:** $\\propto \\frac{\\gamma}{g_m R_s}$\n2. **Feedback resistor thermal noise:** $\\propto \\frac{R_s}{R_F}$\n\n---\n\n### 3. Optimization Strategies to Minimize NF for $R_{in} = 50\\ \\Omega$\n\n#### Strategy 1: Maximize Total Transconductance ($g_m$)\n* **Mechanism:** Increasing the bias current $I_{DD}$ and transistor widths ($W_1, W_2$) increases $g_m$.\n* **Effect on NF:**\n  1. A higher $g_m$ directly reduces the transistor channel thermal noise contribution $\\frac{\\gamma}{g_m R_s}$.\n  2. As seen from $R_F \\approx g_m r_o R_s$, a higher $g_m$ requires a **larger $R_F$** to maintain $R_{in} = 50\\ \\Omega$. A larger $R_F$ generates less noise current ($4kT/R_F$), which suppresses the resistor noise term $\\frac{R_s}{R_F}$.\n\n#### Strategy 2: Maximize Transistor Output Resistance ($r_o$)\n* **Mechanism:** Increase the channel lengths ($L_1, L_2$) slightly above the minimum process length to boost the individual transistor output resistances $r_{o1}$ and $r_{o2}$.\n* **Effect on NF:**\n  - Increasing $r_o$ increases the intrinsic gain ($g_m r_o$).\n  - From $R_F = R_s + r_o(g_m R_s - 1)$, for a given $g_m R_s > 1$, a larger $r_o$ allows $R_F$ to be made **much larger** while still achieving $R_{in} = 50\\ \\Omega$. This drastically lowers the noise contribution of $R_F$.\n\n#### Strategy 3: Current Reuse & Sizing Ratio Optimization ($W_2 / W_1$)\n* **Mechanism:** \n  - Using an inverter configuration reuses the DC current through both $M_1$ and $M_2$, effectively **doubling $g_m$** for a given supply current compared to a single-transistor CS amplifier.\n  - Set the width ratio $W_2 / W_1 \\approx \\mu_n / \\mu_p$ (typically $W_2 \\approx 2 \\text{ to } 3 \\times W_1$).\n* **Effect on NF:** This sets the DC self-biased operating point near $V_{DD}/2$, placing both transistors in saturation with maximum $g_m$ and maximum $r_o$ for optimal noise efficiency.\n\n#### Strategy 4: Minimize Gate Resistance ($R_g$) via Layout\n* **Mechanism:** Layout the transistors using multi-finger gates with double-sided gate contacts.\n* **Effect on NF:** The physical gate resistance adds directly in series with the input signal and degrades the NF without contributing to signal gain. Multi-fingering reduces $R_g$ to a negligible level.\n\n#### Strategy 5: Proper Sizing of Input Capacitor ($C_1$)\n* **Mechanism:** Ensure $C_1$ is sufficiently large at the operating frequency $f_0$:\n  $$\\frac{1}{2\\pi f_0 C_1} \\ll 50\\ \\Omega$$\n* **Effect on NF:** Prevents reactive impedance at the input that would cause impedance mismatch and degrade the effective NF.\n\n---\n\n### Summary Table of Optimization Steps\n\n| Action | Primary Effect | NF Improvement Mechanism |\n| :--- | :--- | :--- |\n| **Increase current / width ($g_m \\uparrow$)** | Lowers $1/(g_m R_s)$ | Reduces transistor thermal noise & forces higher $R_F$ |\n| **Increase channel length ($r_o \\uparrow$)** | Allows higher $R_F$ for $R_{in} = 50\\ \\Omega$ | Suppresses $R_F$ noise contribution ($R_s/R_F$) |\n| **Tune $W_2/W_1 \\approx \\mu_n/\\mu_p$** | Sets DC bias at $V_{DD}/2$ | Maximizes $g_m$ and $r_o$ per unit current |\n| **Multi-finger transistor layout** | Reduces gate resistance $R_g$ | Eliminates parasitic gate thermal noise |\n| **Large input capacitor $C_1$** | $Z_{C1} \\to 0$ | Avoids reactive noise and matching degradation |",
        "format": "markdown",
        "sha256": "647189d4660ba0add4be321cda531ea72dafa7c49c230f78f8ec34b0b1b3d83e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It uses the finite-output-resistance input-match relation and correctly recommends raising gm above 1/Rs while adjusting RF to preserve the 50-ohm match, allowing NF to fall below 1+γ. The additional optimization suggestions and approximate noise expression do not undermine the central answer.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 7307,
        "total_tokens": 8424,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5849,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 7307,
        "total_tokens": 8424,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5849,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the **Noise Figure (NF)** of the inverter-based resistive-feedback Low-Noise Amplifier (LNA) shown while keeping the input impedance matched to $R_{\\text{in}} = R_S = 50\\ \\Omega$, we must analyze how the input impedance and noise sources interact.\n\n---\n\n### 1. Circuit Analysis & Constraints\n\nFor the complementary inverter stage ($M_1$ and $M_2$) with feedback resistor $R_F$:\n* **Total Transconductance:** $G_m = g_{m1} + g_{m2}$\n* **Output Resistance:** $r_o = r_{o1} \\parallel r_{o2}$\n\nThe input resistance looking into the gate node is given by:\n$$R_{\\text{in}} = \\frac{R_F + r_o}{1 + G_m r_o}$$\n\nIf $r_o \\gg R_F$, this simplifies to:\n$$R_{\\text{in}} \\approx \\frac{1}{G_m} = \\frac{1}{g_{m1} + g_{m2}}$$\n\n---\n\n### 2. Noise Figure (NF) Derivation\n\nThe Noise Factor ($F$) accounts for noise from:\n1. Source resistance ($R_S$)\n2. Feedback resistor ($R_F$)\n3. Transistors $M_1$ and $M_2$ channel thermal noise\n\n$$F = 1 + \\frac{R_S}{R_F} + \\frac{\\gamma G_m R_S}{\\left(1 + \\frac{R_F}{r_o}\\right)^2}$$\n\nWhen $r_o \\gg R_F$, the noise factor simplifies to the classic expression:\n$$F \\approx 1 + \\frac{R_S}{R_F} + \\gamma G_m R_S$$\n\nSince $R_{\\text{in}} = R_S = 50\\ \\Omega \\implies G_m R_S \\approx 1$, we get:\n$$F \\approx 1 + \\gamma + \\frac{R_S}{R_F}$$\n\n---\n\n### 3. Optimization Strategies for Minimum NF\n\n#### **Strategy 1: Maximize Feedback Resistance ($R_F$)**\n* From $F \\approx 1 + \\gamma + \\frac{R_S}{R_F}$, the noise contribution of $R_F$ is directly proportional to $\\frac{R_S}{R_F}$.\n* **Action:** Select $R_F \\gg R_S$ (e.g., $R_F > 500\\ \\Omega$). As $R_F \\to \\infty$, the feedback noise contribution vanishes ($\\frac{R_S}{R_F} \\to 0$), capping the minimum theoretical noise figure near $1 + \\gamma$ (approx. $3\\text{ dB}$ for $\\gamma = 1$).\n\n#### **Strategy 2: Find the Mathematical Optimal $R_F$ Considering Finite $r_o$**\nIf the transistor output resistance $r_o$ is finite, enforcing $R_{\\text{in}} = R_S$ requires:\n$$G_m R_S = 1 + \\frac{R_F - R_S}{r_o}$$\n\nSubstituting this into the Noise Factor expression yields:\n$$F(R_F) \\approx 1 + \\gamma\\left(1 - \\frac{R_S}{r_o}\\right) + \\frac{R_S}{R_F} + \\gamma \\frac{R_F}{r_o}$$\n\nDifferentiating $F(R_F)$ with respect to $R_F$ and setting it to zero gives the **optimal feedback resistance**:\n$$R_{F,\\text{opt}} = \\sqrt{\\frac{r_o R_S}{\\gamma}}$$\n\n#### **Strategy 3: Increase Output Resistance ($r_o$)**\n* **Action:** Increase the channel length $L$ of $M_1$ and $M_2$ (or use a cascoded inverter topology).\n* **Reason:** Increasing $r_o$ increases $R_{F,\\text{opt}}$, which directly minimizes both the thermal noise of $R_F$ and the required $G_m$ overhead.\n\n#### **Strategy 4: Leverage Current Reuse ($g_{m1}$ vs $g_{m2}$)**\n* Since $G_m = g_{m1} + g_{m2}$, both NMOS ($M_1$) and PMOS ($M_2$) amplify the signal while sharing the exact same DC bias current.\n* **Action:** Size $M_1$ and $M_2$ such that both transistors operate near their optimal $g_m/I_D$ (typically in moderate inversion). This achieves the required $G_m = 20\\text{ mS}$ (for $50\\ \\Omega$) with minimum bias current and minimum channel noise factor $\\gamma$.\n\n#### **Strategy 5: Cancel Parasitic Gate Capacitance (High-Frequency Optimization)**\n* At higher frequencies, the input parasitic capacitance $C_{\\text{in}} = C_{gs1} + C_{gs2} + (1 + A_v)C_{gd}$ degrades both $R_{\\text{in}}$ matching and gain.\n* **Action:** Place a series inductor ($L_g$) in series with $C_1$ to resonate with $C_{\\text{in}}$ at the desired operating frequency $\\omega_0 = \\frac{1}{\\sqrt{L_g C_{\\text{in}}}}$.\n\n---\n\n### Summary Checklist for Design Optimization\n\n1. Set total $G_m = g_{m1} + g_{m2} \\approx \\frac{1}{50\\ \\Omega} = 20\\text{ mS}$.\n2. Increase transistor channel lengths $L$ to boost $r_o$.\n3. Choose feedback resistance near $R_{F,\\text{opt}} = \\sqrt{\\frac{r_o \\cdot 50\\ \\Omega}{\\gamma}}$ (typically several hundred ohms).\n4. Add a series gate inductor $L_g$ to cancel parasitic input capacitance at the operating frequency.",
        "format": "markdown",
        "sha256": "b0ed73d27dbaca7761cb9e7347a567d51d2b77640d00cd4f37d833d54004b808"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the inverter’s finite-output-resistance input-match relation and shows that the matched gm can exceed 1/Rs. However, its noise model and optimization conclusion are wrong: it asserts a finite optimal RF and an NF floor of 1 + gamma, whereas increasing gm and adjusting RF to preserve the match can lower NF below that value.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 13118,
        "total_tokens": 14235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11769,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 13118,
        "total_tokens": 14235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11769,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the input impedance $R_{\\text{in}}$ looking into node $P$, we perform a small-signal AC analysis of the circuit. \n\n---\n\n### **Step 1: Voltage at Node $X$**\nTransistor $M_1$ acts as a common-source amplifier. Assuming ideal transistors (neglecting channel-length modulation $r_O \\to \\infty$ for now):\n\n$$v_X = -g_{m1} R_{D1} v_P$$\n\n---\n\n### **Step 2: Differential Pair Stage ($M_2, M_3$)**\nTransistors $M_2$ and $M_3$ form a PMOS differential pair biased by current source $I_{\\text{SS}}$:\n* Gate of $M_2$: $v_{g2} = v_X$\n* Gate of $M_3$: $v_{g3} = 0$ (AC ground)\n\nThe small-signal voltage at the shared source node $v_s$ is given by:\n$$v_s = \\frac{g_{m2}}{g_{m2} + g_{m3}} v_X$$\n\nThe small-signal current $i_{d3}$ flowing out of the drain of $M_3$ into the output node $V_{\\text{out}}$ is:\n$$i_{d3} = g_{m3}(v_s - v_{g3}) = \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) v_X$$\n\nSubstituting $v_X = -g_{m1} R_{D1} v_P$:\n$$i_{d3} = -\\left(\\frac{g_{m1} g_{m2} g_{m3} R_{D1}}{g_{m2} + g_{m3}}\\right) v_P = -G_m v_P$$\n\nwhere we define the overall effective transconductance $G_m$ as:\n$$G_m = \\frac{g_{m1} g_{m2} g_{m3} R_{D1}}{g_{m2} + g_{m3}}$$\n\n*(If $M_2$ and $M_3$ are matched such that $g_{m2} = g_{m3} = g_{m2,3}$, then $G_m = \\frac{1}{2} g_{m1} g_{m2,3} R_{D1}$.)*\n\n---\n\n### **Step 3: Node Equation at $V_{\\text{out}}$**\nApplying Kirchhoff's Current Law (KCL) at node $V_{\\text{out}}$:\n$$i_{d3} = \\frac{v_{\\text{out}}}{R_{D2}} + \\frac{v_{\\text{out}} - v_P}{R_F}$$\n\nSubstitute $i_{d3} = -G_m v_P$:\n$$-G_m v_P = v_{\\text{out}} \\left( \\frac{1}{R_{D2}} + \\frac{1}{R_F} \\right) - \\frac{v_P}{R_F}$$\n\nRearranging terms to find $v_{\\text{out}}$:\n$$v_{\\text{out}} \\left( \\frac{R_{D2} + R_F}{R_{D2} R_F} \\right) = v_P \\left( \\frac{1}{R_F} - G_m \\right)$$\n\n$$v_{\\text{out}} = v_P \\frac{R_{D2}(1 - G_m R_F)}{R_{D2} + R_F}$$\n\n---\n\n### **Step 4: Input Impedance Calculation**\nThe current $i_{\\text{in}}$ flowing into node $P$ from the right of $C_{\\text{in}}$ (since the gate of $M_1$ draws zero DC/low-frequency current) is:\n\n$$i_{\\text{in}} = \\frac{v_P - v_{\\text{out}}}{R_F}$$\n\nSubstitute the expression for $v_{\\text{out}}$:\n$$v_P - v_{\\text{out}} = v_P \\left[ 1 - \\frac{R_{D2}(1 - G_m R_F)}{R_{D2} + R_F} \\right] = v_P \\left[ \\frac{R_F + G_m R_{D2} R_F}{R_{D2} + R_F} \\right] = v_P R_F \\left[ \\frac{1 + G_m R_{D2}}{R_{D2} + R_F} \\right]$$\n\nThus:\n$$i_{\\text{in}} = \\frac{v_P R_F \\left( \\frac{1 + G_m R_{D2}}{R_{D2} + R_F} \\right)}{R_F} = v_P \\left( \\frac{1 + G_m R_{D2}}{R_{D2} + R_F} \\right)$$\n\nThe input resistance $R_{\\text{in}} = \\frac{v_P}{i_{\\text{in}}}$ is:\n\n$$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + G_m R_{D2}}$$\n\n---\n\n### **Final Expression**\n\n1. **For general transconductances:**\n   $$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\left(\\frac{g_{m1} g_{m2} g_{m3} R_{D1}}{g_{m2} + g_{m3}}\\right) R_{D2}}$$\n\n2. **Assuming matched PMOS transistors ($g_{m2} = g_{m3} = g_{m2,3}$):**\n   $$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}}$$\n\n3. **If channel-length modulation ($r_O$) is considered:**\n   Replace $R_{D1}$ with $(R_{D1} \\parallel r_{O1})$ and $R_{D2}$ with $(R_{D2} \\parallel r_{O3})$.",
        "format": "markdown",
        "sha256": "99a99cbce98c4bdd828a2169e4b83dd7a1e142ec83e4ba2662c675430dd32197"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer derives the exact result \\(R_{in}=(R_F+R_{D2})/(1+G_mR_{D2})\\) and, for the matched pair, identifies \\(G_mR_{D2}=\\tfrac12 g_{m1}g_{m2,3}R_{D1}R_{D2}=A_0\\), as required.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 8958,
        "total_tokens": 10062,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7540,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 8958,
        "total_tokens": 10062,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7540,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the input impedance looking into node $P$ (as indicated by the arrow for $R_{\\text{in}}$), we perform a small-signal analysis of the circuit.\n\n---\n\n### **1. Small-Signal Stage-by-Stage Analysis**\n\n#### **Stage 1: Common-Source Amplifier ($M_1$)**\n* Gate voltage at node $P$: $v_p$\n* Drain voltage at node $X$: $v_X$\n* Assuming channel-length modulation is neglected ($\\lambda = 0$ or $r_{o1} \\to \\infty$):\n  $$v_X = -g_{m1} R_{D1} v_p$$\n\n---\n\n#### **Stage 2: Differential Pair ($M_2, M_3$)**\n* The PMOS transistors $M_2$ and $M_3$ form a differential pair powered by tail current source $I_{\\text{SS}}$.\n* The gate of $M_2$ is driven by $v_X$, while the gate of $M_3$ is tied to an AC ground ($V_b$).\n* The AC tail node voltage $v_s$ is given by:\n  $$v_s = \\frac{g_{m2}}{g_{m2} + g_{m3}} v_X$$\n* The small-signal current $i_{d3}$ flowing out of the drain of $M_3$ into node $V_{\\text{out}}$ is:\n  $$i_{d3} = g_{m3}(v_s - 0) = \\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}} v_X$$\n\nAssuming matched transistors ($g_{m2} = g_{m3} = g_{m2,3}$):\n$$i_{d3} = \\frac{1}{2} g_{m2,3} v_X = -\\frac{1}{2} g_{m1} g_{m2,3} R_{D1} v_p$$\n\n---\n\n### **2. KCL Equations at Nodes $P$ and $V_{\\text{out}}$**\n\nTo compute $R_{\\text{in}}$, inject a test current $i_{\\text{test}}$ into node $P$:\n\n1. **At Node $P$:**\n   Since the MOSFET gate draws no DC or AC current:\n   $$i_{\\text{test}} = \\frac{v_p - v_{\\text{out}}}{R_F} \\implies v_{\\text{out}} = v_p - i_{\\text{test}} R_F$$\n\n2. **At Node $V_{\\text{out}}$:**\n   Sum of currents entering node $V_{\\text{out}}$ equals current leaving through $R_{D2}$:\n   $$i_{d3} + i_{\\text{test}} = \\frac{v_{\\text{out}}}{R_{D2}}$$\n\n---\n\n### **3. Deriving Input Resistance $R_{\\text{in}}$**\n\nSubstitute $i_{d3}$ and $v_{\\text{out}}$ into the KCL equation for node $V_{\\text{out}}$:\n\n$$-\\frac{1}{2} g_{m1} g_{m2,3} R_{D1} v_p + i_{\\text{test}} = \\frac{v_p - i_{\\text{test}} R_F}{R_{D2}}$$\n\nMultiply both sides by $R_{D2}$:\n$$-\\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2} v_p + i_{\\text{test}} R_{D2} = v_p - i_{\\text{test}} R_F$$\n\nRearrange terms to isolate $v_p$ and $i_{\\text{test}}$:\n$$i_{\\text{test}} (R_F + R_{D2}) = v_p \\left( 1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2} \\right)$$\n\nSolving for $R_{\\text{in}} = \\frac{v_p}{i_{\\text{test}}}$:\n\n$$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}}$$\n\n*(If $g_{m2} \\neq g_{m3}$, replace $\\frac{1}{2}g_{m2,3}$ with $\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}$).*\n\n---\n\n### **4. Total Input Impedance $Z_{\\text{in}}(s)$**\n\nIf including the input capacitor $C_{\\text{in}}$, the total input impedance looking from the current source $I_{\\text{in}}$ is the parallel combination of $R_{\\text{in}}$ and $C_{\\text{in}}$:\n\n$$Z_{\\text{in}}(s) = R_{\\text{in}} \\parallel \\frac{1}{s C_{\\text{in}}} = \\frac{R_{\\text{in}}}{1 + s C_{\\text{in}} R_{\\text{in}}}$$\n\n---\n\n### **Final Answer**\n* **Input Resistance at Node $P$:**\n  $$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}}$$\n\n* **Total Input Impedance (including $C_{\\text{in}}$):**\n  $$Z_{\\text{in}}(s) = \\frac{R_{\\text{in}}}{1 + s C_{\\text{in}} R_{\\text{in}}}$$",
        "format": "markdown",
        "sha256": "d82f064cc6506b25290529eaada3eb715dcf03071c08107e0507d4d434d8bc23"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact input resistance, with the correct unloaded gain factor A0 = (1/2)gm1 gm2,3 RD1 RD2. The optional input-capacitance expression does not affect the requested result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 9724,
        "total_tokens": 10828,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8433,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 9724,
        "total_tokens": 10828,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8433,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the input impedance (or input resistance $R_{\\text{in}}$) looking into node $P$, we perform a small-signal analysis of the circuit.\n\n---\n\n### **1. Small-Signal Stage Analysis**\n\n#### **Stage 1: Common-Source Amplifier ($M_1$)**\n- $M_1$ acts as a common-source stage driven by the voltage $v_P$ at node $P$.\n- The small-signal voltage at node $X$ is given by:\n  $$v_X = -g_{m1} R_{D1} v_P$$\n  *(assuming $r_{o1} \\gg R_{D1}$)*\n\n#### **Stage 2: Differential Pair Stage ($M_2 - M_3$)**\n- Transistors $M_2$ and $M_3$ form a PMOS differential pair biased by the current source $I_{\\text{SS}}$.\n- The gate of $M_2$ is driven by $v_X$, while the gate of $M_3$ is tied to a DC bias voltage $V_{\\text{b}}$ (AC ground: $v_{g3} = 0$).\n- The small-signal voltage at the shared source node $v_S$ is:\n  $$v_S = \\frac{g_{m2}}{g_{m2} + g_{m3}} v_X$$\n  \n- The small-signal current $i_{sd3}$ flowing out of the drain of $M_3$ into the output node $V_{\\text{out}}$ is:\n  $$i_{sd3} = g_{m3} (v_S - v_{g3}) = g_{m3} v_S = \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) v_X$$\n\n- Substituting $v_X = -g_{m1} R_{D1} v_P$:\n  $$i_{sd3} = -\\left(\\frac{g_{m1} g_{m2} g_{m3} R_{D1}}{g_{m2} + g_{m3}}\\right) v_P$$\n\nFor matched differential pair transistors ($g_{m2} = g_{m3}$):\n$$i_{sd3} = -\\frac{1}{2} g_{m1} g_{m3} R_{D1} v_P$$\n\n---\n\n### **2. Calculation of Input Resistance ($R_{\\text{in}}$)**\n\nTo find the input resistance $R_{\\text{in}}$ looking into node $P$ (to the right of $C_{\\text{in}}$):\n\n1. Apply a test voltage $v_P$ at node $P$.\n2. Since the gate of $M_1$ draws zero small-signal DC current ($i_{g1} = 0$), all test current $i_t$ entering node $P$ flows through the feedback resistor $R_F$:\n   $$i_t = \\frac{v_P - v_{\\text{out}}}{R_F} \\implies v_{\\text{out}} = v_P - i_t R_F$$\n\n3. Apply Kirchhoff's Current Law (KCL) at node $V_{\\text{out}}$:\n   $$\\sum I_{\\text{into } V_{\\text{out}}} = i_{sd3} + i_t = \\frac{v_{\\text{out}}}{R_{D2}}$$\n\n4. Substitute $i_{sd3}$ and $v_{\\text{out}}$ into the KCL equation:\n   $$-\\left(\\frac{g_{m1} g_{m2} g_{m3} R_{D1}}{g_{m2} + g_{m3}}\\right) v_P + i_t = \\frac{v_P - i_t R_F}{R_{D2}}$$\n\n5. Rearranging terms to solve for $\\frac{v_P}{i_t}$:\n   $$i_t \\left(1 + \\frac{R_F}{R_{D2}}\\right) = \\frac{v_P}{R_{D2}} \\left[ 1 + \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) g_{m1} R_{D1} R_{D2} \\right]$$\n\n   $$i_t \\left(\\frac{R_F + R_{D2}}{R_{D2}}\\right) = \\frac{v_P}{R_{D2}} \\left[ 1 + \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) g_{m1} R_{D1} R_{D2} \\right]$$\n\n---\n\n### **3. Final Result**\n\n#### **Low-Frequency Input Resistance ($R_{\\text{in}}$):**\n$$R_{\\text{in}} = \\frac{v_P}{i_t} = \\frac{R_F + R_{D2}}{1 + \\left(\\dfrac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) g_{m1} R_{D1} R_{D2}}$$\n\nIf $M_2$ and $M_3$ are matched ($g_{m2} = g_{m3}$), the expression simplifies to:\n$$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m3} R_{D1} R_{D2}}$$\n\n* **Approximation for High Open-Loop Gain:**\n  When the loop gain $A_0 = \\frac{1}{2} g_{m1} g_{m3} R_{D1} R_{D2} \\gg 1$ and $R_F \\gg R_{D2}$:\n  $$R_{\\text{in}} \\approx \\frac{2 R_F}{g_{m1} g_{m3} R_{D1} R_{D2}}$$\n\n---\n\n#### **Frequency-Dependent Input Impedance ($Z_{\\text{in}}(s)$ including $C_{\\text{in}}$):**\nIf the input capacitance $C_{\\text{in}}$ at node $P$ is included, the overall input impedance is:\n$$Z_{\\text{in}}(s) = R_{\\text{in}} \\parallel \\frac{1}{s C_{\\text{in}}} = \\frac{R_{\\text{in}}}{1 + s R_{\\text{in}} C_{\\text{in}}}$$",
        "format": "markdown",
        "sha256": "f20c32f26f59d853b8297903542cb227e47a5263e7123001bd58fb70d2c293be"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Derives the exact result, Rin = (RF + RD2)/(1 + A0), with the matched-pair gain A0 = ½ gm1 gm2,3 RD1 RD2. The optional capacitance discussion does not affect the correct core answer.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 11493,
        "total_tokens": 12597,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10025,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 11493,
        "total_tokens": 12597,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10025,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the output phase noise of the VCO generated by the LDO regulator's thermal noise ($S_{\\text{th}}$), we analyze how supply voltage fluctuations translate into phase fluctuations at the oscillator output.\n\nThis process relies on the **Supply Pushing Factor** ($K_{\\text{push}}$ or $f_{\\text{push}}$), which quantifies the sensitivity of the VCO's oscillation frequency to supply voltage variations.\n\n---\n\n### 1. Identify the Modulation Mechanism\n\nIn the given circuit:\n1. **Varactor Bias Shift (Primary Effect):** The center tap of inductors $L_1$ is connected directly to $V_{\\text{out}}$, meaning the DC voltage at nodes $X$ and $Y$ is equal to $V_{\\text{out}}$. The varactors ($M_{v1}, M_{v2}$) experience a bias voltage of:\n   $$V_{\\text{varactor}} = V_{\\text{out}} - V_{\\text{cont}}$$\n   Any noise $v_{n,\\text{LDO}}(t)$ on $V_{\\text{out}}$ directly alters the varactor capacitance $C_{\\text{var}}$, modulating the oscillation frequency $\\omega_0$.\n   \n2. **Parasitic Capacitance & Tail Current Modulation:** $V_{\\text{out}}$ fluctuations also alter transistor parasitic capacitances ($C_{db}, C_{gd}$) and, if the tail current source $I_{\\text{VCO}}$ has finite output impedance, modulate the amplitude (leading to AM-to-PM conversion).\n\n---\n\n### 2. Define the Supply Pushing Factor ($K_{\\text{push}}$)\n\nThe supply pushing factor is defined as:\n$$K_{\\text{push}} = \\frac{\\partial \\omega_0}{\\partial V_{\\text{out}}} \\quad [\\text{rad/s/V}]$$\nor in Hz/V:\n$$f_{\\text{push}} = \\frac{\\partial f_0}{\\partial V_{\\text{out}}} = \\frac{K_{\\text{push}}}{2\\pi} \\quad [\\text{Hz/V}]$$\n\n> **Note:** Because $V_{\\text{varactor}} = V_{\\text{out}} - V_{\\text{cont}}$, the varactor contribution to supply pushing is directly tied to the VCO tuning sensitivity ($K_{\\text{VCO}}$):\n> $$K_{\\text{push, varactor}} \\approx -K_{\\text{VCO}}$$\n\n---\n\n### 3. Step-by-Step Derivation of Phase Noise\n\n#### Step 1: Frequency Fluctuation Spectrum\nThe LDO noise spectral density $S_{\\text{th}}(\\Delta f)$ (in $\\text{V}^2/\\text{Hz}$) at an offset frequency $\\Delta f$ causes a frequency deviation spectral density $S_{\\Delta \\omega}(\\Delta f)$:\n$$S_{\\Delta \\omega}(\\Delta f) = K_{\\text{push}}^2 \\cdot S_{\\text{th}}(\\Delta f) \\quad [(\\text{rad/s})^2/\\text{Hz}]$$\n\n#### Step 2: Phase Fluctuation Spectrum\nSince excess phase $\\phi(t)$ is the time integral of frequency deviation $\\Delta \\omega(t)$, integration in the frequency domain corresponds to division by $\\omega^2 = (2\\pi \\Delta f)^2$:\n$$S_{\\phi,\\text{LDO}}(\\Delta f) = \\frac{S_{\\Delta \\omega}(\\Delta f)}{(2\\pi \\Delta f)^2} = \\frac{K_{\\text{push}}^2 \\cdot S_{\\text{th}}(\\Delta f)}{(2\\pi \\Delta f)^2} = \\frac{f_{\\text{push}}^2 \\cdot S_{\\text{th}}(\\Delta f)}{\\Delta f^2} \\quad [\\text{rad}^2/\\text{Hz}]$$\n\n#### Step 3: Single-Sideband (SSB) Phase Noise\nThe single-sideband phase noise $\\mathcal{L}_{\\text{LDO}}(\\Delta f)$ due to the LDO noise is half of the phase noise spectral density:\n$$\\mathcal{L}_{\\text{LDO}}(\\Delta f) = \\frac{1}{2} S_{\\phi,\\text{LDO}}(\\Delta f) = \\frac{f_{\\text{push}}^2 \\cdot S_{\\text{th}}(\\Delta f)}{2 \\cdot \\Delta f^2}$$\n\nExpressed in **$\\text{dBc/Hz}$**:\n$$\\mathcal{L}_{\\text{LDO}}(\\Delta f) = 10 \\log_{10} \\left( \\frac{f_{\\text{push}}^2 \\cdot S_{\\text{th}}(\\Delta f)}{2 \\cdot \\Delta f^2} \\right)$$\n\n---\n\n### 4. Alternative Analysis: Hajimiri's Impulse Sensitivity Function (ISF)\n\nIf using the time-variant phase noise model (ISF framework):\n1. Determine the LDO noise effective ISF, $\\Gamma_{\\text{supply}}(\\theta)$.\n2. Calculate its DC (average) coefficient $c_{0,\\text{supply}}$:\n   $$c_{0,\\text{supply}} = \\frac{1}{2\\pi} \\int_{0}^{2\\pi} \\Gamma_{\\text{supply}}(\\theta) d\\theta$$\n3. The resulting phase noise contribution is:\n   $$\\mathcal{L}_{\\text{LDO}}(\\Delta f) = 10 \\log_{10} \\left( \\frac{c_{0,\\text{supply}}^2 \\cdot S_{\\text{th}}(\\Delta f)}{8 \\cdot \\Delta f^2} \\right)$$\n*(Both methods yield identical results because $c_{0,\\text{supply}} = \\frac{2 f_{\\text{push}}}{f_0}$.)*\n\n---\n\n### 5. Total VCO Phase Noise Calculation\n\nThe total phase noise at the VCO output is the power sum of the intrinsic VCO phase noise (from tank resistance, cross-coupled pair, and tail current) and the LDO-induced phase noise:\n\n$$\\mathcal{L}_{\\text{total}}(\\Delta f) = 10 \\log_{10} \\left( 10^{\\frac{\\mathcal{L}_{\\text{VCO, intrinsic}}(\\Delta f)}{10}} + 10^{\\frac{\\mathcal{L}_{\\text{LDO}}(\\Delta f)}{10}} \\right)$$\n\n---\n\n### Summary Formula\n\nTo calculate the output phase noise contributed by the LDO thermal noise:\n\n$$\\mathcal{L}_{\\text{LDO}}(\\Delta f) = \\frac{f_{\\text{push}}^2 \\cdot S_{\\text{th}}(\\Delta f)}{2 \\Delta f^2}$$\n\n* **$f_{\\text{push}}$**: Supply pushing factor of the VCO in $\\text{Hz/V}$.\n* **$S_{\\text{th}}(\\Delta f)$**: Output noise power spectral density of the LDO in $\\text{V}^2/\\text{Hz}$.\n* **$\\Delta f$**: Offset frequency from the carrier in $\\text{Hz}$.",
        "format": "markdown",
        "sha256": "284842b7cbc3ae5872a2d92e936f257ace799e581e25a215fa74a4f47c492e9a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing through the varactors, converts LDO noise using the frequency sensitivity df/dVout, and applies FM-to-phase conversion with the 1/Δf² dependence. It also notes the connection to KVCO; the extra material does not change the correct core result.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1127,
        "output_tokens": 4218,
        "total_tokens": 5345,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2716,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1127,
        "output_tokens": 4218,
        "total_tokens": 5345,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2716,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the output phase noise of the VCO resulting from the LDO's thermal (and flicker) voltage noise, we use the concept of **supply pushing** (or frequency modulation via supply noise). \n\nHere is the step-by-step mathematical and physical procedure to compute this phase noise:\n\n---\n\n### 1. Identify the Sensitivity (Supply Pushing Factor $K_{\\text{push}}$)\n\nLow-frequency voltage fluctuations from the LDO at node $V_{\\text{out}}$ modulate the oscillation frequency $\\omega_0$. \n\nIn the given circuit diagram:\n* The inductors $L_1$ have virtually zero DC resistance, meaning the DC bias voltage at output nodes $X$ and $Y$ tracks $V_{\\text{out}}$ directly: \n  $$V_{X,Y,\\text{DC}} \\approx V_{\\text{out}}$$\n* The tuning varactors $M_{v1}$ and $M_{v2}$ are connected between nodes $X, Y$ and the control voltage $V_{\\text{cont}}$. The bias voltage across the varactors is:\n  $$V_{\\text{var}} = V_{\\text{out}} - V_{\\text{cont}}$$\n\nBecause the varactor capacitance $C_v$ depends nonlinearly on $V_{\\text{var}}$, any noise $\\Delta v_{\\text{out}}$ from the LDO changes $C_v$, which shifts the center frequency $\\omega_0$.\n\nWe define the **Supply Pushing Factor** $K_{\\text{push}}$ (in rad/s/V) or $f_{\\text{push}}$ (in Hz/V) as:\n$$K_{\\text{push}} = \\frac{\\partial \\omega_0}{\\partial V_{\\text{out}}} = 2\\pi f_{\\text{push}}$$\n\n> **Note:** $K_{\\text{push}}$ can be obtained via:\n> 1. **Measurement / Simulation:** Running a DC sweep of $V_{\\text{out}}$ and computing $\\frac{d f_0}{d V_{\\text{out}}}$.\n> 2. **Derivation:** Using $K_{\\text{push}} \\approx K_{\\text{VCO}} \\cdot \\frac{\\partial V_{\\text{var}}}{\\partial V_{\\text{out}}} = K_{\\text{VCO}}$ (assuming $V_{\\text{cont}}$ is fixed).\n\n---\n\n### 2. Map Supply Voltage Noise to Frequency Noise\n\nLet $S_{\\text{th}}(\\Delta f)$ be the Single-Sided Power Spectral Density (PSD) of the LDO output voltage noise at an offset frequency $\\Delta f$ (expressed in $\\text{V}^2/\\text{Hz}$).\n\nThe resulting instantaneous frequency deviation is:\n$$\\Delta \\omega(t) = K_{\\text{push}} \\cdot v_{n,\\text{LDO}}(t)$$\n\nThe spectral density of the frequency fluctuations $S_{\\Delta \\omega}(\\Delta f)$ is given by:\n$$S_{\\Delta \\omega}(\\Delta f) = K_{\\text{push}}^2 \\cdot S_{\\text{th}}(\\Delta f) \\quad [(\\text{rad/s})^2/\\text{Hz}]$$\n\n---\n\n### 3. Convert Frequency Noise to Phase Noise\n\nSince phase is the time integral of frequency ($\\phi(t) = \\int \\Delta \\omega(t) dt$), integration in the time domain corresponds to division by $\\omega = 2\\pi \\Delta f$ in the frequency domain.\n\nThe Power Spectral Density of phase fluctuations $S_\\phi(\\Delta f)$ is:\n$$S_\\phi(\\Delta f) = \\frac{S_{\\Delta \\omega}(\\Delta f)}{(2\\pi \\Delta f)^2} = \\frac{K_{\\text{push}}^2}{(2\\pi \\Delta f)^2} S_{\\text{th}}(\\Delta f) = \\left( \\frac{f_{\\text{push}}}{\\Delta f} \\right)^2 S_{\\text{th}}(\\Delta f) \\quad [\\text{rad}^2/\\text{Hz}]$$\n\n---\n\n### 4. Single-Sideband (SSB) Phase Noise Calculation\n\nSingle-Sideband Phase Noise $\\mathcal{L}(\\Delta f)$ (in $\\text{dBc/Hz}$) is defined as half of the phase noise spectrum $S_\\phi(\\Delta f)$:\n\n$$\\mathcal{L}_{\\text{LDO}}(\\Delta f) = 10 \\log_{10} \\left( \\frac{1}{2} S_\\phi(\\Delta f) \\right)$$\n\nSubstituting $S_\\phi(\\Delta f)$:\n\n$$\\mathcal{L}_{\\text{LDO}}(\\Delta f) = 10 \\log_{10} \\left( \\frac{f_{\\text{push}}^2}{2 \\cdot (\\Delta f)^2} \\cdot S_{\\text{th}}(\\Delta f) \\right) \\quad [\\text{dBc/Hz}]$$\n\n---\n\n### 5. High-Frequency Upconversion (ISF Model / Cyclostationary Noise)\n\nIf the LDO noise $S_{\\text{th}}$ extends to higher frequencies (near harmonics of $\\omega_0$, e.g., $2\\omega_0$), high-frequency noise components upconvert into the oscillation band.\n\nUsing **Hajimiri’s Impulse Sensitivity Function (ISF)** framework:\n\n1. Calculate the DC coefficient of the supply-to-phase ISF, $c_{0,\\text{supply}}$:\n   $$c_{0,\\text{supply}} = \\frac{f_{\\text{push}}}{f_0}$$\n2. The low-frequency contribution yields the same formula derived above:\n   $$\\mathcal{L}_{\\text{LDO}}(\\Delta f) = 10 \\log_{10} \\left( \\frac{c_{0,\\text{supply}}^2 \\cdot f_0^2 \\cdot S_{\\text{th}}(\\Delta f)}{2 \\cdot (\\Delta f)^2} \\right)$$\n\n---\n\n### Summary Formula\n\nTo quickly estimate the contribution of the LDO's thermal noise $S_{\\text{th}}(\\Delta f)$ to the VCO phase noise:\n\n$$\\mathcal{L}_{\\text{LDO}}(\\Delta f) = 10 \\log_{10} \\left( \\frac{f_{\\text{push}}^2 \\cdot S_{\\text{th}}(\\Delta f)}{2 \\Delta f^2} \\right)$$\n\n* **$f_{\\text{push}}$**: VCO supply pushing factor ($\\text{Hz/V}$)\n* **$S_{\\text{th}}(\\Delta f)$**: LDO output voltage noise spectral density ($\\text{V}^2/\\text{Hz}$)\n* **$\\Delta f$**: Offset frequency from carrier ($\\text{Hz}$)",
        "format": "markdown",
        "sha256": "421f1d70ade45c27d9a038d632b515079eac7a510e8179187fd924e350260975"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, converts LDO voltage noise through the frequency sensitivity and the 1/Δf² FM-to-phase relationship, and notes the direct varactor coupling and relation to KVCO. The extra ISF discussion does not undermine the essential answer.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1127,
        "output_tokens": 3767,
        "total_tokens": 4894,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2325,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1127,
        "output_tokens": 3767,
        "total_tokens": 4894,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2325,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the output phase noise of the VCO resulting from the thermal noise generated by the LDO regulator, we analyze how supply voltage fluctuations modulate the oscillation frequency (a phenomenon known as **supply pushing**).\n\n---\n\n### Step 1: Define Supply Pushing ($K_{\\text{push}}$)\n\nFluctuations in the LDO output voltage $V_{\\text{out}}$ alter the common-mode voltage at nodes $X$ and $Y$. Since the varactors ($M_{v1}, M_{v2}$) experience a bias voltage dependent on $V_{\\text{out}} - V_{\\text{cont}}$, any noise on $V_{\\text{out}}$ changes the total tank capacitance $C_{\\text{eq}}$, modulating the VCO's oscillation frequency $f_0$.\n\nWe quantify this effect using the **supply pushing factor**, $K_{\\text{push}}$:\n$$K_{\\text{push}} = \\frac{\\partial f_0}{\\partial V_{\\text{out}}} \\quad [\\text{Hz/V}]$$\n\nSince $f_0 = \\frac{1}{2\\pi \\sqrt{L_{\\text{eq}} C_{\\text{eq}}}}$, we can express $K_{\\text{push}}$ in terms of the tank sensitivity:\n$$K_{\\text{push}} = -\\frac{f_0}{2 C_{\\text{eq}}} \\cdot \\frac{\\partial C_{\\text{eq}}}{\\partial V_{\\text{out}}}$$\n\n---\n\n### Step 2: Frequency-to-Phase Noise Modulation (FM Mechanism)\n\nLet $v_{n,\\text{LDO}}(t)$ be the noise voltage from the LDO with a power spectral density (PSD) of $S_{\\text{th}}(\\Delta f)$ in $\\text{V}^2/\\text{Hz}$.\n\n1. **Frequency Deviation**:\n   The instantaneous frequency deviation $\\Delta f(t)$ caused by the LDO noise is:\n   $$\\Delta f(t) = K_{\\text{push}} \\cdot v_{n,\\text{LDO}}(t)$$\n\n2. **Phase Deviation**:\n   Since phase is the integral of frequency ($\\phi(t) = 2\\pi \\int \\Delta f(t) \\, dt$), the transfer function from frequency noise to phase noise introduces an integration factor $\\frac{1}{j 2\\pi \\Delta f}$ in the frequency domain.\n\n3. **Phase Noise PSD ($S_\\phi$)**:\n   The power spectral density of the excess phase fluctuations is:\n   $$S_\\phi(\\Delta f) = \\left( \\frac{K_{\\text{push}}}{\\Delta f} \\right)^2 S_{\\text{th}}(\\Delta f) \\quad [\\text{rad}^2/\\text{Hz}]$$\n\n---\n\n### Step 3: Compute Single-Sideband Phase Noise ($\\mathcal{L}$)\n\nSingle-sideband (SSB) phase noise is defined as half of the phase noise spectral density $S_\\phi(\\Delta f)$:\n\n$$\\mathcal{L}_{\\text{LDO}}(\\Delta f) = \\frac{1}{2} S_\\phi(\\Delta f) = \\frac{1}{2} \\left( \\frac{K_{\\text{push}}}{\\Delta f} \\right)^2 S_{\\text{th}}(\\Delta f)$$\n\nExpressed in **dBc/Hz**:\n$$\\mathcal{L}_{\\text{LDO}}(\\Delta f) = 10 \\log_{10} \\left[ \\frac{1}{2} \\left( \\frac{K_{\\text{push}}}{\\Delta f} \\right)^2 S_{\\text{th}}(\\Delta f) \\right]$$\n\n---\n\n### Step 4: Time-Variant Framework (ISF Perspective)\n\nUsing Hajimiri’s Impulse Sensitivity Function (ISF) model, low-frequency noise on the supply rail converts to phase noise via the DC average of the ISF ($\\Gamma_0$ or $c_0$):\n\n$$\\mathcal{L}_{\\text{LDO}}(\\Delta f) = \\frac{c_0^2 \\cdot S_{\\text{th}}}{8 \\cdot q_{\\text{max}}^2 \\cdot (2\\pi \\Delta f)^2}$$\n\nwhere:\n* $c_0$ is the DC Fourier coefficient of the ISF for the supply node $V_{\\text{out}}$.\n* $q_{\\text{max}}$ is the maximum charge swing on the tank node.\n\n*(Note: $c_0$ is directly proportional to $K_{\\text{push}}$. In a symmetric differential oscillator, high-frequency common-mode noise from $V_{\\text{out}}$ around $f_0$ or $2f_0$ is largely rejected unless circuit mismatches exist).*\n\n---\n\n### Summary of Total Output Phase Noise\n\nTo find the **total** output phase noise of the VCO, add the LDO-induced phase noise $\\mathcal{L}_{\\text{LDO}}(\\Delta f)$ to the intrinsic phase noise of the LC oscillator core $\\mathcal{L}_{\\text{VCO}}(\\Delta f)$:\n\n$$\\mathcal{L}_{\\text{total}}(\\Delta f) \\approx \\mathcal{L}_{\\text{VCO}}(\\Delta f) + \\frac{1}{2} \\left( \\frac{K_{\\text{push}}}{\\Delta f} \\right)^2 S_{\\text{th}}(\\Delta f)$$",
        "format": "markdown",
        "sha256": "072ecd1f7013394543121d7911a9cf160cfb7e867b5911abd8e4e914b2f5d8cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and uses Kpush = df/dVout to convert the LDO noise to phase noise with the required 1/Δf² dependence and SSB factor. It omits the explicit design takeaway that Kpush is closely related to KVCO and that reducing KVCO reduces this noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1127,
        "output_tokens": 4414,
        "total_tokens": 5541,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3281,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1127,
        "output_tokens": 4414,
        "total_tokens": 5541,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3281,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor $C_{\\text{T}}$ to the tail node (node $P$) of a differential cross-coupled LC oscillator introduces **two competing mechanisms** that affect phase noise. \n\nIn a basic setup with just a capacitor, **the overall phase noise typically degrades**, despite providing one specific benefit.\n\n---\n\n### 1. The Positive Effect: Filtering $I_{\\text{SS}}$ Noise\n* **Mechanism:** High-frequency thermal noise from the tail current source $I_{\\text{SS}}$ around the second harmonic ($2\\omega_0$) is commutated (switched) by the transistor pair $M_1\\text{--}M_2$ and downconverted to the fundamental frequency $\\omega_0$, contributing directly to phase noise.\n* **Impact:** $C_{\\text{T}}$ provides a low-impedance path to ground at $2\\omega_0$, bypassing/filtering out this high-frequency noise from $I_{\\text{SS}}$ before it can downconvert into the output spectrum.\n\n---\n\n### 2. The Negative Effects: Low Tail Impedance at $2\\omega_0$\nDespite filtering $I_{\\text{SS}}$ noise, placing a simple capacitor $C_{\\text{T}}$ creates a low impedance at $2\\omega_0$ at node $P$, which causes significant degradation due to three main reasons:\n\n1. **Loss of Source Degeneration for $M_1$ and $M_2$:**\n   * During zero-crossings (when both $M_1$ and $M_2$ are simultaneously active/ON), source degeneration normally helps suppress the noise generated by $M_1$ and $M_2$.\n   * $C_{\\text{T}}$ short-circuits node $P$ to ground at $2\\omega_0$, removing this degeneration. This **maximizes the noise injected by $M_1$ and $M_2$** into the LC tank.\n\n2. **Loading of the LC Tank (Q-factor Degradation):**\n   * As $M_1$ and $M_2$ switch, they draw current spikes from $C_{\\text{T}}$. This creates a low-resistance path to ground during switching transitions, loading the LC tank and **lowering its effective Quality Factor ($Q$)**.\n\n3. **Increased Noise Sensitivity Window (ISF):**\n   * The capacitor $C_{\\text{T}}$ charges and discharges during the switching cycle, extending the duration for which both transistors remain in the active region simultaneously. This increases the oscillator's Impulse Sensitivity Function (ISF) near zero-crossings, making it more vulnerable to noise.\n\n---\n\n### Summary & Solution\n\n* **Net Result:** In practice, the **detrimental effects** (increased noise from $M_1/M_2$ and tank loading) usually outweigh the benefit of filtering the tail current noise. Therefore, adding just $C_{\\text{T}}$ **degrades the phase noise**.\n* **The Solution (Tail Filtering):** To get the benefit of filtering without the downside of low impedance at $2\\omega_0$, an inductor ($L_{\\text{T}}$) is added in series with $C_{\\text{T}}$ or in parallel with the tail. This forms a resonant filter tuned to $2\\omega_0$ (known as **Hegazi Tail Filtering**), providing **high impedance at $2\\omega_0$** while still bypassing noise at higher frequencies.",
        "format": "markdown",
        "sha256": "31b9190d9734b105e9ec7c849c87f7d8b22aefc9a6d1186e0e78420502450449"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that adding CT generally degrades phase noise, missing the nonmonotonic effect and the class-C regime where peak tank currents can exceed ISS and improve phase noise. It also omits the cited flicker-noise upconversion or large-CT instability mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 3796,
        "total_tokens": 4897,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 3796,
        "total_tokens": 4897,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor $C_{\\text{T}}$ to the tail node (node $P$) of a cross-coupled LC oscillator has a **dual (competing) effect** on phase noise. Depending on the offset frequency and circuit parameters, it can improve certain noise components while worsening others:\n\n---\n\n### 1. Beneficial Effect: Shunting Noise from the Tail Current Source\n* **Mechanism:** The noise from the tail current source $I_{\\text{SS}}$ around the second harmonic ($2\\omega_0$) downconverts to the fundamental oscillation frequency ($\\omega_0$) due to the periodic switching action of the differential pair ($M_1, M_2$).\n* **Effect of $C_{\\text{T}}$:** $C_{\\text{T}}$ acts as a low-impedance bypass path to ground at high frequencies. It shunts the thermal noise of $I_{\\text{SS}}$ around $2\\omega_0$ to ground before it can be downconverted into the LC tank, **reducing the phase noise contribution from the current source**.\n\n---\n\n### 2. Degrading Effects:\n\n#### A. Increased Noise Contribution from $M_1$ and $M_2$ at $2\\omega_0$\n* **Without $C_{\\text{T}}$:** Node $P$ presents a high impedance at $2\\omega_0$ (due to $I_{\\text{SS}}$). This high tail impedance acts as degeneration, which suppresses the noise contribution from the differential pair transistors ($M_1, M_2$) around $2\\omega_0$.\n* **With $C_{\\text{T}}$:** $C_{\\text{T}}$ AC-grounds node $P$ at $2\\omega_0$, removing this source degeneration. As a result, the thermal noise of $M_1$ and $M_2$ around $2\\omega_0$ is converted into phase noise **much more efficiently**, increasing overall phase noise.\n\n#### B. Increased Upconversion of $1/f$ (Flicker) Noise\n* The tail node voltage naturally oscillates at $2\\omega_0$. Adding $C_{\\text{T}}$ introduces a phase shift in this $2\\omega_0$ waveform relative to the output voltage.\n* This phase shift creates asymmetrical switching waveforms, which enhances **AM-to-PM conversion** and upconverts low-frequency flicker noise ($1/f$ noise) into phase noise, elevating the **$1/f^3$ phase noise corner frequency**.\n\n#### C. Tank Loading and Triode Region Entry\n* Because $C_{\\text{T}}$ prevents node $P$ from rising during peak differential output swings, the drain-to-source voltage $V_{\\text{DS}}$ of the conducting transistor drops lower than it normally would.\n* This can push $M_1$ or $M_2$ into the **triode region** near peak swing, which severely degrades the quality factor ($Q$) of the LC tank and increases phase noise.\n\n---\n\n### Summary Table\n\n| Phase Noise Mechanism | Effect of Tail Capacitor $C_{\\text{T}}$ | Result on Phase Noise |\n| :--- | :--- | :--- |\n| **$I_{\\text{SS}}$ Thermal Noise at $2\\omega_0$** | Shunted to ground | **Improves** (Lowers phase noise) |\n| **$M_1, M_2$ Noise at $2\\omega_0$** | Degenerative suppression lost | **Degrades** (Increases phase noise) |\n| **Flicker Noise ($1/f$) Upconversion** | Asymmetric switching / AM-to-PM | **Degrades** (Worsens $1/f^3$ corner) |\n| **LC Tank Loaded Q** | Transistors enter triode region | **Degrades** (Reduces tank Q) |\n\n---\n\n### Practical Solution: The Noise Filter\nTo retain the benefit of filtering high-frequency noise without suffering the drawbacks of low impedance at $2\\omega_0$, a **noise filter** (often an inductor $L_{\\text{T}}$ placed in parallel or series with $C_{\\text{T}}$ tuned to resonate at $2\\omega_0$) is used. This presents a high impedance to node $P$ at $2\\omega_0$ while still filtering noise.",
        "format": "markdown",
        "sha256": "b9bc54a6f831538f3b4fe8ad6ab6a7a853f7b57d4506d65fd9a62bfef934e33e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It identifies competing filtering and flicker-noise-upconversion effects, but misses the key class-C improvement mechanism—peak tank currents exceeding ISS—and does not clearly explain the dependence on CT or its large-value instability limit.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 4360,
        "total_tokens": 5461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3433,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 4360,
        "total_tokens": 5461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3433,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a tail capacitor $C_{\\text{T}}$ to the tail node $P$ of a cross-coupled LC oscillator generally **degrades (increases) the overall phase noise**. \n\nWhile $C_{\\text{T}}$ provides a minor benefit by shunting high-frequency noise from the tail current source $I_{\\text{SS}}$, its net effect is detrimental due to two main mechanisms: **tank loading (triode operation)** and **increased noise injection from the cross-coupled pair**.\n\n---\n\n### Key Mechanisms:\n\n#### 1. Driving Transistors into the Triode Region (Tank Loading)\n* **Without $C_{\\text{T}}$:** Node $P$ naturally fluctuates at twice the oscillation frequency ($2\\omega_0$). When the output swing peaks and one gate voltage (e.g., $V_Y$) reaches its maximum, node $P$ rises to follow it. This keeps $V_{\\text{GS}}$ moderate and prevents $V_{\\text{DS}}$ from dropping too low relative to $V_{\\text{GS}} - V_{\\text{TH}}$.\n* **With $C_{\\text{T}}$:** $C_{\\text{T}}$ provides a low-impedance path (an AC short) at $2\\omega_0$, preventing node $P$ from rising during peak swings. \n* As a result, $V_{\\text{GS}}$ becomes excessively large while the drain voltage drops, pushing $M_1$ and $M_2$ deep into the **triode (linear) region** during part of the oscillation cycle.\n* In the triode region, the transistor acts as a low channel resistance $R_{\\text{on}}$ directly in parallel with the LC tank. This severely **degrades the quality factor ($Q$) of the tank**, which directly increases phase noise.\n\n---\n\n#### 2. Increased Noise Injection from $M_1$ and $M_2$\n* The thermal noise produced by the switching transistors $M_1$ and $M_2$ around $2\\omega_0$ gets downconverted into phase noise around the fundamental frequency $\\omega_0$.\n* Without $C_{\\text{T}}$, the high impedance at node $P$ at $2\\omega_0$ provides degeneration that attenuates this noise current injection.\n* With $C_{\\text{T}}$ shorting node $P$ to ground at $2\\omega_0$, this degeneration is lost, allowing significantly **more noise from the cross-coupled pair to be injected into the LC tank**.\n\n---\n\n#### 3. Tail Current Noise Filtering (Minor Positive Effect)\n* $C_{\\text{T}}$ does help filter out noise from the tail current source $I_{\\text{SS}}$ around $2\\omega_0$, preventing it from being downconverted to $\\omega_0$. \n* However, because $C_{\\text{T}}$ simultaneously creates a low impedance at $2\\omega_0$, the negative effects (triode loading and lost degeneration) **far outweigh** this noise-filtering benefit.\n\n---\n\n### Summary / Solution in Modern Design:\nTo gain the benefit of noise filtering without degrading phase noise through triode operation, designers use the **Hegazi-Abidi Tail-Filtering Technique**: a tail inductor $L_{\\text{T}}$ is added in series/parallel with $C_{\\text{T}}$ to create a **high impedance (resonance)** at $2\\omega_0$ while filtering tail current noise. \n\nWithout such an inductor, adding **$C_{\\text{T}}$ alone degrades the oscillator's phase noise**.",
        "format": "markdown",
        "sha256": "8ac817981e01af1112f07513a3ddeed44d5877ad983420bea5e315b6c323b83b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies triode operation of M1/M2 as a possible adverse effect, which is a mechanism in the golden solution. But it incorrectly concludes that CT monotonically degrades phase noise and misses the class-C regime where peak tank currents can exceed ISS and improve phase noise.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 5331,
        "total_tokens": 6432,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 5331,
        "total_tokens": 6432,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To estimate the oscillation frequency of the given circuit, we recognize it as a **Parallel-Coupled Quadrature LC VCO (QVCO)** consisting of two identical LC cross-coupled oscillators coupled in anti-phase to achieve $90^\\circ$ quadrature outputs.\n\n---\n\n### 1. Circuit Analysis and Signal Definitions\n\n- **Identical Oscillators**: \n  - Top stage (VCO 1) has output nodes $X_1, Y_1$ with tank inductance $L$ and tank capacitance $C$, yielding an uncoupled resonant frequency:\n    $$\\omega_0 = \\frac{1}{\\sqrt{LC}}$$\n  - Bottom stage (VCO 2) has output nodes $X_2, Y_2$ with identical tank parameters $L$ and $C$.\n\n- **Cross-Coupled Pairs (Negative Resistance)**:\n  - Transistors biased by $I_{\\text{SS}}$ provide negative conductance $-g_{m,\\text{SS}}$ to compensate for the tank parallel loss resistance $R_p$.\n\n- **Coupling Pairs**:\n  - Transistors biased by $I_1$ couple signals between the two stages with transconductance $g_{m1}$.\n  - Defining the differential voltages as $V_1 = V_{X1} - V_{Y1}$ and $V_2 = V_{X2} - V_{Y2}$:\n    - **Top coupling pair**: Injects current into Tank 1 equal to:\n      $$I_{\\text{c1}} = -g_{m1}(V_{X2} - V_{Y2}) = -g_{m1} V_2$$\n    - **Bottom coupling pair** (due to the crossover connection): Injects current into Tank 2 equal to:\n      $$I_{\\text{c2}} = -g_{m1}(V_{Y1} - V_{X1}) = +g_{m1} V_1$$\n\n---\n\n### 2. Frequency Domain Equations\n\nApplying Kirchhoff's Current Law (KCL) at the output nodes for both oscillators:\n\n1. **For VCO 1**:\n   $$\\left[Y(j\\omega) - g_{m,\\text{SS}}\\right] V_1 + g_{m1} V_2 = 0 \\implies \\left[Y(j\\omega) - g_{m,\\text{SS}}\\right] V_1 = -g_{m1} V_2$$\n\n2. **For VCO 2**:\n   $$\\left[Y(j\\omega) - g_{m,\\text{SS}}\\right] V_2 - g_{m1} V_1 = 0 \\implies \\left[Y(j\\omega) - g_{m,\\text{SS}}\\right] V_2 = +g_{m1} V_1$$\n\nDividing these two equations gives the phase relationship:\n$$\\frac{V_1}{V_2} = \\frac{-g_{m1}}{Y(j\\omega) - g_{m,\\text{SS}}} = \\frac{Y(j\\omega) - g_{m,\\text{SS}}}{g_{m1}} = \\mp j$$\n\nThis confirms that the two outputs oscillate in **quadrature** ($V_2 = \\pm j V_1$).\n\nSquaring both sides yields:\n$$\\left[Y(j\\omega) - g_{m,\\text{SS}}\\right]^2 = -g_{m1}^2 \\implies Y(j\\omega) - g_{m,\\text{SS}} = \\pm j g_{m1}$$\n\n---\n\n### 3. Derivation of Oscillation Frequency\n\nThe admittance of each parallel RLC tank is:\n$$Y(j\\omega) = \\frac{1}{R_p} + j\\left(\\omega C - \\frac{1}{\\omega L}\\right)$$\n\nEquating real and imaginary parts:\n- **Real Part (Gain Condition)**: $\\frac{1}{R_p} = g_{m,\\text{SS}}$\n- **Imaginary Part (Frequency Condition)**:\n  $$\\omega C - \\frac{1}{\\omega L} = \\pm g_{m1}$$\n\nRearranging into a quadratic equation in $\\omega$:\n$$\\omega^2 \\mp \\frac{g_{m1}}{C}\\omega - \\omega_0^2 = 0$$\n\nSolving for the positive frequency $\\omega$:\n$$\\omega = \\sqrt{\\omega_0^2 + \\left(\\frac{g_{m1}}{2C}\\right)^2} \\pm \\frac{g_{m1}}{2C}$$\n\n---\n\n### 4. Summary of Closed-Form Approximations\n\n1. **Exact Closed-Form**:\n   $$\\omega = \\sqrt{\\frac{1}{LC} + \\left(\\frac{g_{m1}}{2C}\\right)^2} \\pm \\frac{g_{m1}}{2C}$$\n\n2. **First-Order Approximation (Weak Coupling, $g_{m1} \\ll 2\\omega_0 C$)**:\n   $$\\omega \\approx \\omega_0 \\pm \\frac{g_{m1}}{2C} = \\omega_0 \\left(1 \\pm \\frac{g_{m1}}{2\\omega_0 C}\\right)$$\n\n3. **In terms of Tank Quality Factor $Q$ and Bias Currents**:\n   Using $Q = \\frac{\\omega_0 C}{g_{m,\\text{SS}}}$:\n   $$\\omega \\approx \\omega_0 \\left(1 \\pm \\frac{1}{2Q}\\frac{g_{m1}}{g_{m,\\text{SS}}}\\right) \\approx \\omega_0 \\left(1 \\pm \\frac{1}{2Q}\\frac{I_1}{I_{\\text{SS}}}\\right)$$",
        "format": "markdown",
        "sha256": "99ed18eec640b49d9886c45b857a0073b97756f2055b2ada2ad59e9c61a80a59"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the tank resonance and the coupling-induced shift in the required form: Δω ≈ (g_m,c/g_m,core)ω₀/(2Q) ≈ (I₁/I_SS)ω₀/(2Q), with either quadrature mode allowed. The g_m,c/(2C) expression is an intermediate small-signal result tied to the stated gain condition, so it does not conflict with the golden solution.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 11414,
        "total_tokens": 12518,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 11414,
        "total_tokens": 12518,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To estimate the oscillation frequency of the circuit, we first recognize that this is a **Parallel-Coupled Quadrature LC Oscillator (P-QVCO)** consisting of two identical coupled LC oscillator stages (top and bottom).\n\n---\n\n### 1. Topology & Quadrature Phase Relationship\n\n- **Each Stage** contains:\n  - An LC tank with inductance $L$, total node capacitance $C$, and equivalent parallel loss resistance $R_p$.\n  - A cross-coupled NMOS pair (biased by tail current $I_{\\text{SS}}$) providing negative resistance to sustain oscillation.\n  - A coupling NMOS pair (biased by tail current $I_1$) driven by the opposite stage's outputs.\n\nLet the differential output voltages of the two stages be:\n$$V_{O1} = V_{X1} - V_{Y1}$$\n$$V_{O2} = V_{X2} - V_{Y2}$$\n\nTracing the coupling network:\n- Stage 1 is driven by Stage 2 with a differential coupling current proportional to $-V_{O2}$.\n- Stage 2 is driven by Stage 1 with a differential coupling current proportional to $+V_{O1}$.\n\nFor steady-state oscillation with equal amplitudes ($|V_{O1}| = |V_{O2}|$), the two outputs must oscillate in **quadrature** ($90^\\circ$ out of phase):\n$$V_{O2} = \\pm j V_{O1}$$\n\n---\n\n### 2. Small-Signal Analysis\n\nThe admittance of each LC tank is:\n$$Y_{\\text{tank}}(\\omega) = \\frac{1}{R_p} + j \\left( \\omega C - \\frac{1}{\\omega L} \\right)$$\n\nWriting the small-signal differential equation for Stage 1:\n$$Y_{\\text{tank}}(\\omega) V_{O1} = g_{m,\\text{cross}} V_{O1} - g_{m,\\text{coup}} V_{O2}$$\n\nSubstituting $V_{O2} = \\pm j V_{O1}$:\n$$Y_{\\text{tank}}(\\omega) = g_{m,\\text{cross}} \\mp j g_{m,\\text{coup}}$$\n\nEquating real and imaginary parts:\n\n1. **Real Part (Startup / Amplitude Condition):**\n   $$g_{m,\\text{cross}} = \\frac{1}{R_p}$$\n\n2. **Imaginary Part (Frequency Condition):**\n   $$\\omega C - \\frac{1}{\\omega L} = \\mp g_{m,\\text{coup}}$$\n\nNear the uncoupled tank resonant frequency $\\omega_0 = \\frac{1}{\\sqrt{LC}}$, we approximate $\\omega C - \\frac{1}{\\omega L} \\approx 2 C (\\omega - \\omega_0)$:\n\n$$2 C (\\omega - \\omega_0) \\approx \\mp g_{m,\\text{coup}}$$\n\n$$\\omega \\approx \\omega_0 \\mp \\frac{g_{m,\\text{coup}}}{2 C}$$\n\nExpressed in terms of the tank quality factor $Q = R_p \\omega_0 C$:\n$$\\omega \\approx \\omega_0 \\left( 1 \\mp \\frac{1}{2 Q} \\frac{g_{m,\\text{coup}}}{g_{m,\\text{cross}}} \\right)$$\n\n---\n\n### 3. Large-Signal (Current-Switching) Analysis\n\nUnder large-signal operation, the transistors act as current switches:\n- The cross-coupled pair injects a fundamental current component in phase with the output voltage, proportional to $I_{\\text{SS}}$.\n- The coupling pair injects a fundamental current component in quadrature ($90^\\circ$ phase-shifted), proportional to $I_1$.\n\nThe phase angle $\\phi$ of the total injected current relative to the tank voltage is:\n$$\\tan \\phi = \\pm \\frac{I_1}{I_{\\text{SS}}}$$\n\nAt steady state, the tank impedance phase $\\angle Z_{\\text{tank}}(\\omega) \\approx -\\arctan \\left( 2 Q \\frac{\\omega - \\omega_0}{\\omega_0} \\right)$ must cancel this phase shift:\n\n$$2 Q \\frac{\\omega - \\omega_0}{\\omega_0} \\approx \\mp \\frac{I_1}{I_{\\text{SS}}}$$\n\nThus, the oscillation frequency is shifted to:\n$$\\omega \\approx \\omega_0 \\left( 1 \\mp \\frac{1}{2 Q} \\frac{I_1}{I_{\\text{SS}}} \\right)$$\n\n---\n\n### Final Result Summary\n\n- **Uncoupled Tank Resonance Frequency:**\n  $$\\omega_0 = \\frac{1}{\\sqrt{LC}}$$\n\n- **Small-Signal Oscillation Frequency:**\n  $$\\omega \\approx \\frac{1}{\\sqrt{LC}} \\mp \\frac{g_{m,\\text{coup}}}{2C} = \\omega_0 \\left( 1 \\mp \\frac{1}{2 Q} \\frac{g_{m,\\text{coup}}}{g_{m,\\text{cross}}} \\right)$$\n\n- **Large-Signal Oscillation Frequency:**\n  $$\\omega \\approx \\frac{1}{\\sqrt{LC}} \\left( 1 \\mp \\frac{1}{2 Q} \\frac{I_1}{I_{\\text{SS}}} \\right)$$\n\n*(Note: The $\\mp$ sign indicates that the oscillator can settle into one of two quadrature phase modes, shifting the frequency slightly above or below the tank's natural resonant frequency $\\omega_0$.)*",
        "format": "markdown",
        "sha256": "490e7460c6c05ac80ac0f369e919a6743e2304c51285c60f1800a8a616a4aa0c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the tank resonance and the correct coupling-induced shift, including the large-signal I1/ISS and small-signal gm,coup/gm,cross forms with the 1/(2Q) factor. The additional gm,coup/(2C) expression is tied to the stated edge-of-oscillation condition, as allowed by the golden solution.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 12417,
        "total_tokens": 13521,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11212,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 12417,
        "total_tokens": 13521,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11212,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.6-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To estimate the oscillation frequency of the given circuit, we analyze the circuit topology, which consists of two coupled LC oscillators (Top Oscillator 1 with nodes $X_1, Y_1$ and Bottom Oscillator 2 with nodes $X_2, Y_2$).\n\n---\n\n### 1. Circuit Component Identification\n\n1. **LC Tanks**:\n   - Each oscillator has a differential tank composed of two inductors of inductance $L$ connected to $V_{DD}$ and an equivalent total node capacitance $C$ (including parasitic capacitances at nodes $X_1, Y_1, X_2, Y_2$).\n   - The uncoupled tank resonance frequency is:\n     $$\\omega_0 = \\frac{1}{\\sqrt{LC}} \\quad \\text{or} \\quad f_0 = \\frac{1}{2\\pi\\sqrt{LC}}$$\n   - Each tank has an equivalent parallel loss resistance $R_p$, giving a tank admittance:\n     $$Y(j\\omega) = \\frac{1}{R_p} + j\\left(\\omega C - \\frac{1}{\\omega L}\\right)$$\n\n2. **Cross-Coupled Inner Pairs (Tail Current $I_{SS}$)**:\n   - Provides positive feedback (negative transconductance $-g_{m,SS}$) to cancel tank losses ($1/R_p$).\n\n3. **Coupling Outer Pairs (Tail Current $I_1$)**:\n   - Cross-couples the signals between the top oscillator ($V_{out1} = V_{X1} - V_{Y1}$) and the bottom oscillator ($V_{out2} = V_{X2} - V_{Y2}$) with coupling transconductance $g_{m1}$.\n\n---\n\n### 2. Frequency Derivation\n\nLet the differential outputs be represented as phasors:\n$$V_{out1} = V_1, \\quad V_{out2} = V_2$$\n\nThe active current injected into Tank 1 by the inner and outer transistor pairs is:\n$$I_{tank,1} = g_{m,SS} V_1 + g_{m1} V_2$$\n\nAt steady-state oscillation, $Y(j\\omega) V_1 = I_{tank,1}$:\n$$Y(j\\omega) = g_{m,SS} + g_{m1} \\frac{V_2}{V_1}$$\n\n---\n\n#### Case A: Quadrature Oscillation ($V_2 = \\pm j V_1$)\nFor a quadrature-coupled oscillator, the two tanks oscillate with a $90^\\circ$ phase shift ($\\frac{V_2}{V_1} = \\pm j$). \n\nSubstituting into the admittance equation:\n$$Y(j\\omega) = \\frac{1}{R_p} + j\\left(\\omega C - \\frac{1}{\\omega L}\\right) = g_{m,SS} \\pm j g_{m1}$$\n\nEquating real and imaginary parts:\n- **Real Part (Gain Condition)**:\n  $$\\frac{1}{R_p} = g_{m,SS} \\implies g_{m,SS} R_p = 1$$\n\n- **Imaginary Part (Frequency Shift Condition)**:\n  $$\\omega C - \\frac{1}{\\omega L} = \\pm g_{m1}$$\n\nSolving for $\\omega$:\n$$\\omega^2 \\mp \\frac{g_{m1}}{C}\\omega - \\frac{1}{LC} = 0$$\n\nUsing a first-order Taylor expansion (assuming $g_{m1} \\ll \\omega_0 C$):\n$$\\omega \\approx \\omega_0 \\left( 1 \\pm \\frac{g_{m1}}{2\\omega_0 C} \\right) = \\omega_0 \\left( 1 \\pm \\frac{I_1}{I_{SS}} \\frac{1}{2Q} \\right)$$\nwhere $Q = \\omega_0 R_p C$ is the quality factor of the LC tank.\n\n---\n\n#### Case B: In-Phase / Anti-Phase Oscillation ($V_2 = \\pm V_1$)\nIf the coupling is in-phase or anti-phase ($\\frac{V_2}{V_1} = \\pm 1$), the injected coupling current is purely real:\n$$Y(j\\omega) = g_{m,SS} \\pm g_{m1}$$\n\nEquating real and imaginary parts:\n- **Real Part**: $\\frac{1}{R_p} = g_{m,SS} \\pm g_{m1}$\n- **Imaginary Part**: \n  $$\\omega C - \\frac{1}{\\omega L} = 0 \\implies \\omega = \\frac{1}{\\sqrt{LC}}$$\n\nIn this case, the coupling affects only the startup/amplitude condition without shifting the oscillation frequency away from the tank's resonant frequency.\n\n---\n\n### Final Summary\n\n- **Ideal / Tank Resonance Frequency**:\n  $$\\omega_0 = \\frac{1}{\\sqrt{LC}} \\quad \\left(f_0 = \\frac{1}{2\\pi\\sqrt{LC}}\\right)$$\n\n- **Coupling-Corrected Quadrature Frequency**:\n  $$\\omega \\approx \\frac{1}{\\sqrt{LC}} \\left( 1 \\pm \\frac{g_{m1}}{2\\omega_0 C} \\right) = \\omega_0 \\left( 1 \\pm \\frac{I_1}{I_{SS}} \\frac{1}{2Q} \\right)$$",
        "format": "markdown",
        "sha256": "24bd418da999ddca838257fba8d1df5cf6689bb15e3be628c74f9391e949284a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer gives the tank resonance and the required coupling-induced shift, \u00031\u0003omega \u00031\u0003 (I_1/I_{SS})\u0003omega_0/(2Q), including the two possible signs. Its intermediate transconductance derivation is consistent with that estimate; the optional in-phase case does not change the main result.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 16064,
        "total_tokens": 17168,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14858,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 16064,
        "total_tokens": 17168,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14858,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    }
  ]
}
