{
  "model_key": "gemini_37_flash",
  "display_name": "Gemini 3.7 Flash",
  "provider": "google",
  "evaluation_model_ids": [],
  "thinking_effort": "high",
  "configuration_note": "Gemini 3.7 Flash answered the 50 tasks in three rollouts through OpenRouter's chat completions route (google/gemini-3.7-flash) at reasoning effort high, the highest it offers. Requests set temperature to 0 and max_tokens to 65,536, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Gemini 3.7 Flash on 2026-11-10 ($0.75 input, $0.075 cached input, $3.75 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 120,
          "incorrect_count": 30,
          "partial_credit_count": 29,
          "zero_count": 1,
          "mean_score_0_to_4": 3.54,
          "score_percent": 88.5,
          "score_distribution": {
            "0": 1,
            "1": 12,
            "2": 12,
            "3": 5,
            "4": 120
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 120,
          "incorrect_count": 30,
          "partial_credit_count": 29,
          "zero_count": 1,
          "mean_score_0_to_4": 3.54,
          "score_percent": 88.5,
          "score_distribution": {
            "0": 1,
            "1": 12,
            "2": 12,
            "3": 5,
            "4": 120
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 86,
          "incorrect_count": 4,
          "partial_credit_count": 4,
          "zero_count": 0,
          "mean_score_0_to_4": 3.922222222222222,
          "score_percent": 98.05555555555556,
          "score_distribution": {
            "2": 3,
            "3": 1,
            "4": 86
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 86,
          "incorrect_count": 4,
          "partial_credit_count": 4,
          "zero_count": 0,
          "mean_score_0_to_4": 3.922222222222222,
          "score_percent": 98.05555555555556,
          "score_distribution": {
            "2": 3,
            "3": 1,
            "4": 86
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 34,
          "incorrect_count": 26,
          "partial_credit_count": 25,
          "zero_count": 1,
          "mean_score_0_to_4": 2.966666666666667,
          "score_percent": 74.16666666666667,
          "score_distribution": {
            "0": 1,
            "1": 12,
            "2": 9,
            "3": 4,
            "4": 34
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 34,
          "incorrect_count": 26,
          "partial_credit_count": 25,
          "zero_count": 1,
          "mean_score_0_to_4": 2.966666666666667,
          "score_percent": 74.16666666666667,
          "score_distribution": {
            "0": 1,
            "1": 12,
            "2": 9,
            "3": 4,
            "4": 34
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 39,
        "incorrect_count": 11,
        "partial_credit_count": 11,
        "zero_count": 0,
        "mean_score_0_to_4": 3.5,
        "score_percent": 87.5,
        "score_distribution": {
          "1": 5,
          "2": 4,
          "3": 2,
          "4": 39
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 40,
        "incorrect_count": 10,
        "partial_credit_count": 10,
        "zero_count": 0,
        "mean_score_0_to_4": 3.58,
        "score_percent": 89.5,
        "score_distribution": {
          "1": 3,
          "2": 5,
          "3": 2,
          "4": 40
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 41,
        "incorrect_count": 9,
        "partial_credit_count": 8,
        "zero_count": 1,
        "mean_score_0_to_4": 3.54,
        "score_percent": 88.5,
        "score_distribution": {
          "0": 1,
          "1": 4,
          "2": 3,
          "3": 1,
          "4": 41
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 0,
        "input_tokens": 152460,
        "output_tokens": 696336,
        "total_tokens": 848796
      },
      "known_totals": {
        "cached_input_tokens": 0,
        "input_tokens": 152460,
        "output_tokens": 696336,
        "total_tokens": 848796
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.933333333333333,
          "score_percent": 98.33333333333333,
          "score_distribution": {
            "2": 1,
            "4": 29
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 28,
          "incorrect_count": 2,
          "partial_credit_count": 2,
          "zero_count": 0,
          "mean_score_0_to_4": 3.9,
          "score_percent": 97.5,
          "score_distribution": {
            "2": 1,
            "3": 1,
            "4": 28
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.933333333333333,
          "score_percent": 98.33333333333333,
          "score_distribution": {
            "2": 1,
            "4": 29
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 10,
          "incorrect_count": 10,
          "partial_credit_count": 10,
          "zero_count": 0,
          "mean_score_0_to_4": 2.85,
          "score_percent": 71.25,
          "score_distribution": {
            "1": 5,
            "2": 3,
            "3": 2,
            "4": 10
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 12,
          "incorrect_count": 8,
          "partial_credit_count": 8,
          "zero_count": 0,
          "mean_score_0_to_4": 3.1,
          "score_percent": 77.5,
          "score_distribution": {
            "1": 3,
            "2": 4,
            "3": 1,
            "4": 12
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 12,
          "incorrect_count": 8,
          "partial_credit_count": 7,
          "zero_count": 1,
          "mean_score_0_to_4": 2.95,
          "score_percent": 73.75,
          "score_distribution": {
            "0": 1,
            "1": 4,
            "2": 2,
            "3": 1,
            "4": 12
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of the MOSFET **doubles** (increases by a factor of $2$, or approximately $+6\\text{ dB}$).\n\n---\n\n### **Detailed Explanation:**\n\nThe intrinsic gain ($A_0$) of a single MOSFET in saturation is defined as:\n$$A_0 = g_m \\cdot r_o$$\n\nwhere:\n* $g_m$ is the transconductance\n* $r_o$ is the output resistance\n\n---\n\n#### 1. Effect on Transconductance ($g_m$)\nThe transconductance (assuming a constant bias current $I_D$) is given by:\n$$g_m = \\sqrt{2 \\mu C_{ox} \\left(\\frac{W}{L}\\right) I_D}$$\n\n* Since both $W$ and $L$ are doubled:\n  $$\\frac{W'}{L'} = \\frac{2W}{2L} = \\frac{W}{L}$$\n* Because the aspect ratio $\\frac{W}{L}$ remains unchanged, **$g_m$ remains constant** ($g_m' = g_m$).\n\n---\n\n#### 2. Effect on Output Resistance ($r_o$)\nThe output resistance is determined by channel-length modulation:\n$$r_o \\approx \\frac{1}{\\lambda I_D}$$\n\n* The channel-length modulation parameter $\\lambda$ is inversely proportional to channel length ($\\lambda \\propto \\frac{1}{L}$).\n* When $L$ is doubled, $\\lambda$ is halved ($\\lambda' = \\frac{\\lambda}{2}$).\n* Therefore, **$r_o$ doubles** ($r_o' = 2 r_o$).\n\n---\n\n### **Conclusion:**\n$$A_0' = g_m' \\cdot r_o' = (g_m) \\cdot (2 r_o) = 2 A_0$$\n\n* **Intrinsic Gain:** Doubles ($2\\times$).\n* **Trade-off:** The total gate area ($W \\times L$) quadruples ($4\\times$), which increases parasitic capacitances and significantly **reduces the device's speed/bandwidth ($f_T$)**.",
        "format": "markdown",
        "sha256": "c25fe66f8bf5af1db2ee13956402ab3ad22c25f5c471548c3b9e140528acd00a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with unchanged W/L and bias current, gm is approximately unchanged, while doubling L reduces channel-length modulation and doubles ro. The stated assumptions are consistent with the golden solution.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 1813,
        "total_tokens": 1831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1347,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 1813,
        "total_tokens": 1831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1347,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Under first-order MOSFET modeling, if you double both the length ($L$) and the width ($W$) of a MOSFET, its **intrinsic gain doubles** (increases by a factor of $2$).\n\n---\n\n### **Detailed Derivation:**\n\nThe intrinsic gain ($A_{v0}$) of a MOSFET in the saturation region is defined as:\n$$A_{v0} = g_m \\cdot r_o$$\n\nWhere:\n* $g_m$ is the transconductance.\n* $r_o$ is the output resistance.\n\n---\n\n#### 1. Effect on Transconductance ($g_m$)\nThe transconductance can be expressed in terms of drain current ($I_D$) or overdrive voltage ($V_{OV}$):\n$$g_m = \\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) I_D} = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) V_{OV}$$\n\n* When you double both $W$ and $L$:\n  $$\\frac{W'}{L'} = \\frac{2W}{2L} = \\frac{W}{L}$$\n* Since the aspect ratio ($\\frac{W}{L}$) remains constant, **$g_m$ remains unchanged** (assuming constant bias current $I_D$ or constant $V_{GS}$).\n\n---\n\n#### 2. Effect on Output Resistance ($r_o$)\nThe output resistance due to channel-length modulation is:\n$$r_o = \\frac{1}{\\lambda I_D} = \\frac{V_A}{I_D}$$\n\n* The channel-length modulation parameter $\\lambda$ is inversely proportional to the channel length:\n  $$\\lambda \\propto \\frac{1}{L} \\implies r_o \\propto L$$\n* When $L$ is doubled ($L \\to 2L$), the Early voltage $V_A$ doubles, and $\\lambda$ is halved.\n* Therefore, **$r_o$ doubles ($2 \\times r_o$)**.\n\n---\n\n### **Conclusion:**\n$$A_{v0}' = g_m' \\cdot r_o' = g_m \\cdot (2r_o) = 2 A_{v0}$$\n\n* **Intrinsic Gain:** **Doubles (+6 dB)**\n* **Trade-off:** The total gate area ($W \\times L$) quadruples, which increases parasitic capacitances by a factor of 4, significantly reducing the transit frequency/speed ($f_T$) of the transistor.",
        "format": "markdown",
        "sha256": "86c08d0a226318be6ffc48305666bdbe0524b6d2f33c8af2851647fa401f9c00"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that unchanged W/L keeps gm and, under the stated bias assumptions, ID approximately constant, while doubling L approximately doubles ro. Thus intrinsic gain approximately doubles; the extra capacitance comment does not affect the main answer.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 2096,
        "total_tokens": 2114,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1541,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 2096,
        "total_tokens": 2114,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1541,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the channel length ($L$) and channel width ($W$) of a MOSFET while keeping the drain current ($I_D$) constant, its **intrinsic gain ($A_0$) doubles** (increases by a factor of $2$, or $+6\\text{ dB}$).\n\n---\n\n### Step-by-Step Derivation\n\nThe intrinsic gain of a MOSFET is given by:\n$$A_0 = g_m \\cdot r_o$$\n\nWhere:\n* $g_m$ is the transconductance.\n* $r_o$ is the output resistance.\n\n---\n\n#### 1. Effect on Transconductance ($g_m$)\nThe transconductance (in saturation, at constant bias current $I_D$) is:\n$$g_m = \\sqrt{2 \\mu C_{ox} \\left(\\frac{W}{L}\\right) I_D}$$\n\n* Since both $W$ and $L$ are doubled:\n  $$\\frac{W_{\\text{new}}}{L_{\\text{new}}} = \\frac{2W}{2L} = \\frac{W}{L}$$\n* Because the aspect ratio $\\frac{W}{L}$ and the current $I_D$ remain unchanged, **$g_m$ remains the same.**\n\n---\n\n#### 2. Effect on Output Resistance ($r_o$)\nThe output resistance due to channel-length modulation is:\n$$r_o \\approx \\frac{V_A}{I_D} = \\frac{V_A' \\cdot L}{I_D}$$\n\nWhere:\n* $V_A$ is the Early voltage.\n* $V_A'$ is the Early voltage per unit length (a process constant).\n\n* Since $L$ doubles ($L_{\\text{new}} = 2L$), the Early voltage doubles, meaning:\n  $$r_{o,\\text{new}} = 2 r_o$$\n* Therefore, **$r_o$ doubles.**\n\n---\n\n#### 3. Combined Result on Intrinsic Gain ($A_0$)\n$$A_{0,\\text{new}} = g_{m,\\text{new}} \\cdot r_{o,\\text{new}} = g_m \\cdot (2r_o) = 2(g_m r_o) = 2A_0$$\n\n---\n\n### Summary & Practical Note\n* **First-Order (Long-Channel):** The intrinsic gain **doubles** ($+6\\text{ dB}$).\n* **Short-Channel Effects (Advanced Nodes):** In sub-micron technologies, doubling $L$ significantly reduces **DIBL** (Drain-Induced Barrier Lowering). As a result, $r_o$ often increases by *more* than $2\\times$, meaning the intrinsic gain may increase by **more than double**.\n* **Trade-off:** The gate capacitance ($C_{gg} \\approx W \\cdot L \\cdot C_{ox}$) quadruples ($2 \\times 2 = 4\\times$), which reduces the transition frequency ($f_T$) by a factor of 4, making the transistor significantly slower.",
        "format": "markdown",
        "sha256": "ea4fd5070ae936060926844edad11590157642f50fb57a73c98c4aa3cf74ed4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with W/L and drain current unchanged, gm stays roughly constant while ro increases with channel length. The stated constant-current assumption is compatible with the result, and the extra notes do not undermine it.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 2146,
        "total_tokens": 2164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1473,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 2146,
        "total_tokens": 2164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1473,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both students can be correct**, depending on what parameter is held constant. \n\nThis is a classic question in analog CMOS design, and the answer depends entirely on the design constraints:\n\n---\n\n### 1. Student A is correct if the transistor size ($W/L$) is constant.\nIf you have a fixed, physical MOSFET and you increase the gate voltage (and thus the overdrive voltage $V_{ov} = V_{GS} - V_{th}$), the drain current increases quadratically, and the transconductance increases linearly:\n\n$$g_m = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) V_{ov}$$\n\n* **Conclusion:** For a fixed-size device, **$g_m \\propto V_{ov}$** (transconductance goes **up**).\n\n---\n\n### 2. Student B is correct if the drain current ($I_D$) is constant.\nIn circuit design, you often have a fixed power/current budget ($I_D = \\text{constant}$). If you choose to increase $V_{ov}$ while keeping $I_D$ constant, you must make the transistor narrower (decrease $W/L$). Under this constraint, the transconductance is expressed as:\n\n$$g_m = \\frac{2I_D}{V_{ov}}$$\n\n* **Conclusion:** For a fixed current bias, **$g_m \\propto \\frac{1}{V_{ov}}$** (transconductance goes **down**).\n\n---\n\n### Summary\n* **Student A** is thinking about operating a **fixed transistor** at higher gate voltages.\n* **Student B** is thinking about designing at a **fixed bias current**.",
        "format": "markdown",
        "sha256": "8c726698a56dc91d6e54a40114254bef401a88e51fdca2c3f29d9ab73eb73953"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed-size transistor, explains that gm rises with Vov, and accurately notes Student B's result applies when ID is held constant.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1558,
        "total_tokens": 1587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1196,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1558,
        "total_tokens": 1587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1196,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both students can be correct**, depending on what is being held constant (a classic nuance in analog circuit design). \n\nHere is the breakdown based on the standard square-law MOSFET model in the saturation region:\n\n---\n\n### **1. Student A is correct if the transistor dimensions ($W/L$) are constant:**\nIf you have a fixed-size transistor and you increase the gate-source voltage (increasing the overdrive voltage $V_{ov} = V_{GS} - V_{th}$):\n\n$$g_m = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) V_{ov}$$\n\n* **Result:** Transconductance ($g_m$) is **directly proportional** to $V_{ov}$. \n* **Conclusion:** As $V_{ov}$ goes up, **$g_m$ increases** (while drain current $I_D$ also increases quadratically).\n\n---\n\n### **2. Student B is correct if the bias current ($I_D$) is constant:**\nIn analog IC design, power consumption is often fixed, meaning the drain current $I_D$ is held constant. To increase $V_{ov}$ while keeping $I_D$ constant, you must decrease the aspect ratio ($W/L$). Using the expression for $g_m$ in terms of current:\n\n$$g_m = \\frac{2I_D}{V_{ov}}$$\n\n* **Result:** Transconductance ($g_m$) is **inversely proportional** to $V_{ov}$.\n* **Conclusion:** As $V_{ov}$ goes up, **$g_m$ decreases**.\n\n---\n\n### **Summary**\n* **Student A** is referring to a **constant-geometry ($W/L$)** scenario.\n* **Student B** is referring to a **constant-current ($I_D$)** scenario.",
        "format": "markdown",
        "sha256": "567b62ff99ec782202dfccd1efda34fe7b7d6f7c7a4590490d0a36124e5938d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that Student A is right for fixed transistor dimensions, while Student B is right only when drain current is held constant and W/L changes.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1604,
        "total_tokens": 1633,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1604,
        "total_tokens": 1633,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both students can be correct**, depending on what is being held constant. \n\nIn a MOSFET operating in the saturation region, the transconductance ($g_m$) is given by different equations depending on the design constraints:\n\n---\n\n### 1. Student A is correct if the **transistor dimensions ($W/L$) are constant**:\nIf the size of the MOSFET is fixed and you increase the overdrive voltage ($V_{ov} = V_{GS} - V_{th}$), the drain current increases quadratically, and $g_m$ increases linearly:\n\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} V_{ov}$$\n\n* **Conclusion:** For a fixed-size transistor, **$g_m$ increases** as $V_{ov}$ increases.\n\n---\n\n### 2. Student B is correct if the **drain current ($I_D$) is constant**:\nIf you keep the bias current fixed (meaning you must reduce the transistor width $W$ to increase $V_{ov}$), $g_m$ is inversely proportional to $V_{ov}$:\n\n$$g_m = \\frac{2 I_D}{V_{ov}}$$\n\n* **Conclusion:** For a fixed bias current, **$g_m$ decreases** as $V_{ov}$ increases (which is why analog designers lower $V_{ov}$ to get higher current efficiency, $g_m/I_D$).\n\n---\n\n### Summary\n* **Student A** is thinking of a circuit with a **fixed transistor size ($W/L$)**.\n* **Student B** is thinking of an analog design scenario with a **fixed current budget ($I_D$)**.",
        "format": "markdown",
        "sha256": "2ceea8b2e793efa970c8c61b9b968ffa8cc3a68cded78bf23113c259ff7177b4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed transistor size, where gm increases with Vov, and explains that Student B is right only when ID is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1460,
        "total_tokens": 1489,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1100,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1460,
        "total_tokens": 1489,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1100,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the small-signal model of a PMOS device is topologically and mathematically identical to that of an NMOS device.**\n\nIn standard analog design (as taught in textbooks like Razavi or Sedra & Smith), the same equivalent circuit is used for both transistors.\n\n---\n\n### The Small-Signal Model Elements (For Both NMOS & PMOS)\n\n```\n        Gate (G) o------------------+\n                                    |\n                                  + |\n                                   v_gs\n                                  - |\n        Source (S) o-------+--------+\n                           |        |\n                           |      [ ^ ]  g_m * v_gs  (points Drain -> Source)\n                           |        |\n                           |        +------+\n                           |        |      |\n                           |       [ ]     |\n                           |   r_o [ ]     |\n                           |       [ ]     |\n                           |        |      |\n        Drain (D)  o-------+--------+------+\n```\n\n1. **Dependent Current Source:** $i_d = g_m v_{gs}$, directed from **Drain to Source**.\n2. **Output Resistance:** $r_o = \\frac{1}{\\lambda I_D} \\approx \\frac{\\left|V_A\\right|}{I_D}$, connected between **Drain and Source**.\n3. **Body Effect (if included):** $g_{mb} v_{bs}$, directed from **Drain to Source**.\n4. **Capacitances (High-frequency):** $C_{gs}$, $C_{gd}$, $C_{db}$, and $C_{sb}$ are placed between the respective terminals.\n\n---\n\n### Why are they identical despite opposite DC polarities?\n\nSmall-signal analysis models **perturbations (derivatives)** around a DC operating point, not absolute DC values:\n\n* **For NMOS:** Increasing the gate voltage ($+v_g$) increases $V_{GS}$, enhancing the channel and increasing current flowing from Drain to Source $\\rightarrow +i_d$ flows Drain to Source.\n* **For PMOS:** Increasing the gate voltage ($+v_g$) makes $V_{SG}$ *smaller* (less negative $V_{GS}$), which weakens the channel and reduces the current flowing from Source to Drain. A *decrease* in current flowing from Source to Drain is mathematically equivalent to an *increase* in current flowing from Drain to Source $\\rightarrow +i_d$ flows Drain to Source.\n\nBecause the rate of change works out the same way relative to $v_{gs}$, the transconductance is always defined as a positive value:\n$$g_m = \\sqrt{2 \\mu C_{ox} \\frac{W}{L} I_D} = \\frac{2 I_D}{|V_{OV}|} > 0$$\n\n---\n\n### Practical Differences to Keep in Mind\n\nWhile the **model schematic** is identical, the following differ in practical circuit analysis:\n\n1. **Numerical Values:**\n   * Hole mobility ($\\mu_p$) is roughly $2\\times$ to $3\\times$ lower than electron mobility ($\\mu_n$). Consequently, for the same dimensions and bias current, a PMOS has a **smaller $g_m$** than an NMOS.\n2. **AC Ground Connections:**\n   * In typical circuits, the PMOS source is often tied to the positive supply rail ($V_{DD}$). Since DC voltage supplies become **AC grounds** in small-signal analysis, the PMOS source is frequently connected to AC ground.",
        "format": "markdown",
        "sha256": "856b1854e75a9d61771db1043d773c72b0d127ded0f5734456f9fcdbcd47cfbf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model. Its added explanation uses consistent current and voltage polarities, and the practical notes do not undermine the central answer.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 2012,
        "total_tokens": 2032,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1260,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 2012,
        "total_tokens": 2032,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1260,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the small-signal model of a PMOS device is topologically and mathematically identical to that of an NMOS device.**\n\nOnce the DC operating point (bias point) is established, both devices use the exact same small-signal equivalent circuit. \n\n---\n\n### Why are they identical?\n\nSmall-signal models represent **perturbations (AC variations)** around a DC bias point, not the DC voltages and currents themselves. \n\nLet's look at how a change in gate voltage affects current in both devices:\n\n1. **NMOS:**\n   * Increasing $v_g$ ($+v_{gs}$) increases inversion charge $\\rightarrow$ increases current from Drain to Source ($+i_{ds}$).\n   * Small-signal current: $i_{ds} = g_m v_{gs}$ (flowing from Drain to Source).\n\n2. **PMOS:**\n   * Increasing $v_g$ ($+v_{gs}$) reduces the gate-to-source overdrive $|v_{gs}|$ $\\rightarrow$ decreases the DC current flowing from Source to Drain.\n   * A *decrease* in current from Source to Drain is mathematically equivalent to an *increase* in current from Drain to Source ($+i_{ds}$).\n   * Small-signal current: $i_{ds} = g_m v_{gs}$ (flowing from Drain to Source).\n\n*(Alternatively, you can write the current flowing from Source to Drain as $i_{sd} = g_m v_{sg}$, which is mathematically the exact same statement).*\n\n---\n\n### The Shared Small-Signal Model Elements\n\nFor both NMOS and PMOS, the low-frequency hybrid-$\\pi$ model consists of:\n\n* **Gate Terminal:** Open circuit ($i_g = 0$) at low frequencies.\n* **Controlled Current Source:** $g_m v_{gs}$ directed from **Drain to Source**.\n* **Output Resistance:** $r_o = \\frac{1}{\\lambda I_D} \\approx \\frac{|V_A|}{I_D}$ connected between **Drain and Source**.\n* **Body Effect (if applicable):** $g_{mb} v_{bs}$ directed from **Drain to Source**.\n* **Capacitances (high frequency):** $C_{gs}$, $C_{gd}$, $C_{db}$, etc., connected between the respective terminals.\n\n---\n\n### Important Distinctions (What is *not* identical)\n\nWhile the **circuit schematic** of the model is identical, the **numerical values** of the components differ because of the underlying physics:\n\n1. **Carrier Mobility:** Hole mobility ($\\mu_p$) is 2 to 3 times lower than electron mobility ($\\mu_n$). Therefore, for identical dimensions ($W/L$) and bias current ($I_D$), a PMOS will have a smaller transconductance ($g_m$) than an NMOS:\n   $$g_m = \\sqrt{2 \\mu C_{ox} \\frac{W}{L} I_D}$$\n2. **Body Connection:** In standard N-well CMOS processes, PMOS bodies (bulk) can often be tied to their individual sources (eliminating body effect, $g_{mb} = 0$), whereas NMOS devices often share a common p-substrate connected to the lowest supply voltage (ground), causing a non-zero $g_{mb}$.\n3. **Visual Orientation in Schematics:** In circuit schematics, PMOS devices are often drawn with the Source at the top (connected toward $V_{DD}$) and Drain at the bottom, whereas NMOS has Drain on top and Source at the bottom. While this may visually \"flip\" the drawing of the model, the terminal-to-terminal relationships remain identical.",
        "format": "markdown",
        "sha256": "e53e6a1005e98a0ff4304a51fe251386b24ddb766c66194b2239cf0f8aeace93"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model and explains how consistent current and voltage polarities make the controlled-source representation equivalent.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 2316,
        "total_tokens": 2336,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1529,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 2316,
        "total_tokens": 2336,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1529,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the small-signal model of a PMOS device is functionally and topologically identical to that of an NMOS device.**\n\nOnce you establish the DC operating point (bias point), all voltages and currents in the small-signal model represent **time-varying perturbations** ($\\Delta v, \\Delta i$) around that point. Because the linearized equations yield the same relationships, you can use the exact same equivalent circuit for both devices.\n\n---\n\n### The Standard Small-Signal Hybrid-$\\pi$ Model\n\nFor both NMOS and PMOS, the low-frequency hybrid-$\\pi$ model consists of:\n\n1. **Gate Terminal ($G$):** An open circuit at low frequencies (infinite input resistance).\n2. **Dependent Current Source:** Controlled by $v_{gs}$ with value **$g_m v_{gs}$** pointing from **Drain ($D$) to Source ($S$)**.\n3. **Output Resistance ($r_o$):** Connected between Drain and Source.\n4. **Body-Effect Source (if applicable):** Controlled by $v_{bs}$ with value **$g_{mb} v_{bs}$** pointing from Drain to Source.\n\n```\n       G o-----------------+\n                           |\n                         + |\n                        v_gs\n                         - |\n       S o-------+---------+--------+\n                 |                  |\n                 |                  |\n                 |   | /|           |\n                 +-- |/ | g_m*v_gs  |\n                 |   | \\|           |\n                 |     |            [ r_o ]\n                 |     |            [     ]\n                 |     v            |\n                 |                  |\n       D o-------+------------------+\n```\n\n---\n\n### Why Are They Identical Despite Different Carrier Types?\n\n* **NMOS:** If the gate voltage increases ($v_g \\uparrow \\implies v_{gs} > 0$), the transistor turns on stronger, increasing the current flowing from **Drain to Source** ($i_d > 0$).\n* **PMOS:** If the gate voltage increases ($v_g \\uparrow \\implies v_{gs} > 0$), the gate-to-source overdrive decreases, which **reduces** the DC current flowing from **Source to Drain**. In small-signal terms, a *decrease* in current from $S \\to D$ is mathematically identical to a current flowing from **Drain to Source** ($i_d > 0$).\n\nTherefore, the relationship $i_d = g_m v_{gs}$ holds for both devices in magnitude and sign.\n\n---\n\n### Alternative Convention for PMOS ($v_{sg}$)\n\nSome textbooks use an inverted convention specifically for PMOS to keep values positive with respect to typical PMOS DC currents:\n* Control voltage defined as $v_{sg} = v_s - v_g = -v_{gs}$\n* Current source defined as $g_m v_{sg}$ pointing from **Source to Drain**\n\nSince $g_m v_{sg} \\text{ (pointing } S \\to D) \\equiv -g_m v_{gs} \\text{ (pointing } S \\to D) \\equiv g_m v_{gs} \\text{ (pointing } D \\to S)$, **both representations are electrically identical.**\n\n---\n\n### What *Is* Different Between NMOS and PMOS?\n\nWhile the **circuit schematic** of the small-signal model is identical, the **numerical values** of the parameters differ:\n\n1. **Transconductance ($g_m$):**\n   $$g_m = \\sqrt{2 \\mu C_{ox} \\frac{W}{L} I_D}$$\n   Because electron mobility ($\\mu_n$) is roughly $2\\times$ to $3\\times$ higher than hole mobility ($\\mu_p$), an NMOS device will have a higher $g_m$ than a PMOS device of identical dimensions and bias current.\n\n2. **Parasitic Capacitances ($C_{gs}, C_{gd}, C_{db}$):**\n   To achieve the same $g_m$ or current as an NMOS, a PMOS typically requires a wider channel ($W_p \\approx 2\\text{–}3 \\times W_n$), leading to larger parasitic capacitances and lower cutoff frequency ($f_T$).\n\n3. **DC Operating Conditions:**\n   The DC bias conditions required to place the devices into the saturation (active) region have opposite polarities:\n   * **NMOS:** $V_{GS} > V_{THN}$ and $V_{DS} \\ge V_{GS} - V_{THN}$\n   * **PMOS:** $V_{SG} > |V_{THP}|$ and $V_{SD} \\ge V_{SG} - |V_{THP}|$",
        "format": "markdown",
        "sha256": "3c3ad86133f01700051bf1d4299fad7f429d2b144e6bf2d177ab6d7d14fb3ee6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model is the same in form as the NMOS model. The additional polarity discussion is consistent with using source-referenced small-signal variables.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 2816,
        "total_tokens": 2836,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1788,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 2816,
        "total_tokens": 2836,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1788,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the current $I_X$ versus the voltage $V_X$, we analyze the operating regions of the NMOS transistor $M_1$.\n\n---\n\n### **1. Circuit & Terminal Voltages**\n* Transistor $M_1$ is an **NMOS** transistor with its gate and drain tied together (**diode-connected** configuration).\n* **Source:** $V_S = 0\\text{ V}$ (ground)\n* **Gate:** $V_G = V_X \\implies V_{GS} = V_X - 0 = V_X$\n* **Drain:** $V_D = V_X \\implies V_{DS} = V_X - 0 = V_X$\n\n---\n\n### **2. Operating Regions**\n\n#### **Case 1: $V_X \\le V_{TH}$ (Cutoff Region)**\n* The gate-to-source voltage is less than the threshold voltage ($V_{GS} \\le V_{TH}$).\n* The transistor is **OFF**, so no channel is formed:\n  $$I_X = 0$$\n\n*(Note: For negative values of $V_X < 0$, the terminal at $V_X$ becomes the source and ground becomes the drain, resulting in $V_{GS} = 0\\text{ V} < V_{TH}$, so the channel remains OFF).*\n\n---\n\n#### **Case 2: $V_X > V_{TH}$ (Saturation Region)**\n* To check the region of operation, we compare $V_{DS}$ and $V_{GS} - V_{TH}$:\n  $$V_{DS} = V_X$$\n  $$V_{GS} - V_{TH} = V_X - V_{TH}$$\n* Since $V_X > V_X - V_{TH}$ (which simplifies to $0 > -V_{TH}$, always true for an enhancement NMOS where $V_{TH} > 0$), the condition for saturation $V_{DS} \\ge V_{GS} - V_{TH}$ is **always satisfied**.\n* Therefore, once turned ON, $M_1$ is **always in saturation**.\n* The current equation (neglecting channel-length modulation) is:\n  $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_X - V_{TH})^2$$\n\n---\n\n### **3. Sketch of $I_X$ vs. $V_X$**\n\n```\n           IX\n           ^\n           |                     / (Quadratic: ~ (VX - VTH)²)\n           |                    /\n           |                   /\n           |                  /\n           |                 /\n           |               .'\n           |             .'\n-----------+------------+-------------------> VX\n           0           VTH\n   (IX = 0 for VX ≤ VTH)\n```\n\n### **Summary of the Characteristics to Plot:**\n1. **$V_X < V_{TH}$:** $I_X = 0\\text{ A}$ (flat along the horizontal axis).\n2. **At $V_X = V_{TH}$:** Transistor begins to conduct ($I_X = 0\\text{ A}$).\n3. **$V_X > V_{TH}$:** $I_X$ rises **quadratically** with respect to $(V_X - V_{TH})$.",
        "format": "markdown",
        "sha256": "3e6d8ef58bd08d4e2b47f8f3f1d29bd16b3fae4e96e2bad1e14eb22ad4ea7b31"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current up to threshold, and a quadratic rise above threshold with the device in saturation. The negative-voltage detail is secondary and does not affect the essential answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 2209,
        "total_tokens": 3324,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1462,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 2209,
        "total_tokens": 3324,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1462,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find and sketch the relationship between $I_X$ and $V_X$, we analyze the operating regions of the NMOS transistor $M_1$.\n\n---\n\n### **1. Circuit Analysis**\n\n* **Source Voltage:** $V_S = 0\\text{ V}$\n* **Gate Voltage:** $V_G = V_X \\implies V_{GS} = V_X$\n* **Drain Voltage:** $V_D = V_X \\implies V_{DS} = V_X$\n\nSince the gate is connected directly to the drain ($V_D = V_G$), the transistor is in a **diode-connected configuration**.\n\n---\n\n### **2. Regions of Operation**\n\n1. **Cutoff Region ($V_X < V_{TH}$):**\n   * The gate-to-source voltage is less than the threshold voltage ($V_{GS} < V_{TH}$).\n   * The transistor is **OFF**.\n   * **Current:** \n     $$I_X = 0$$\n\n2. **Saturation Region ($V_X \\geq V_{TH}$):**\n   * Since $V_{DS} = V_{GS}$, the condition for saturation is always satisfied:\n     $$V_{DS} = V_X > V_X - V_{TH} = V_{GS} - V_{TH} \\quad (\\text{since } V_{TH} > 0)$$\n   * Therefore, once the transistor turns on, it **always operates in saturation** (it never enters the triode region).\n   * **Current (neglecting channel-length modulation, $\\lambda = 0$):**\n     $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_X - V_{TH})^2$$\n\n---\n\n### **3. Sketch of $I_X$ versus $V_X$**\n\n* For $V_X \\le V_{TH}$, $I_X = 0$ (lies flat along the horizontal axis).\n* At $V_X = V_{TH}$, the transistor turns on.\n* For $V_X > V_{TH}$, $I_X$ increases **quadratically** (parabolically) as $(V_X - V_{TH})^2$.\n\n```\n       IX\n       ^\n       |                / (Quadratic / Parabolic curve)\n       |               /\n       |              /   IX = (1/2) * μn * Cox * (W/L) * (VX - VTH)²\n       |            .'\n       |          .'\n       |        .'\n       |_______'__________________> VX\n       0      VTH\n```",
        "format": "markdown",
        "sha256": "cb382126eac593579bdb94335ea6110f216a2dbde003f8199a4e0ef03abfef2a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives approximately zero current up to threshold followed by a quadratic rise in saturation, matching the full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 1689,
        "total_tokens": 2804,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 1689,
        "total_tokens": 2804,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find and sketch the $I_X$ versus $V_X$ characteristic for the diode-connected NMOS transistor ($M_1$), we analyze the operating regions based on the terminal voltages.\n\n---\n\n### **1. Circuit Analysis**\n\n* **Gate voltage:** $V_G = V_X$\n* **Drain voltage:** $V_D = V_X$\n* **Source voltage:** $V_S = 0\\text{ V}$\n\nFrom this, the overdrive and drain-to-source voltages are:\n* $V_{GS} = V_G - V_S = V_X$\n* $V_{DS} = V_D - V_S = V_X$\n\nSince the gate current is zero ($I_G = 0$), the entire test current flows through the drain:\n$$I_X = I_D$$\n\n---\n\n### **2. Operating Regions**\n\n#### **Case A: $V_X < V_{TH}$ (Cutoff Region)**\n* When $V_{GS} < V_{TH}$, the transistor is off.\n* **Current:**\n  $$I_X = 0$$\n\n#### **Case B: $V_X \\ge V_{TH}$ (Saturation Region)**\n* The condition for saturation in an NMOS is:\n  $$V_{DS} \\ge V_{GS} - V_{TH}$$\n* Substituting $V_{DS} = V_X$ and $V_{GS} = V_X$:\n  $$V_X \\ge V_X - V_{TH} \\implies 0 \\ge -V_{TH}$$\n  Since $V_{TH} > 0$, this condition is **always satisfied**. Therefore, as soon as the transistor turns on, it operates exclusively in the **saturation region**.\n\n* **Current equation** (neglecting channel-length modulation, $\\lambda = 0$):\n  $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n\n*(If channel-length modulation is considered: $I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2 (1 + \\lambda V_X)$).*\n\n---\n\n### **3. Key Features of the $I_X - V_X$ Plot**\n\n1. **Threshold Point ($V_X = V_{TH}$):** The curve intersects the horizontal axis at $V_X = V_{TH}$.\n2. **Slope at $V_X = V_{TH}$:** The small-signal conductance is $\\frac{dI_X}{dV_X} = \\mu_n C_{ox} \\frac{W}{L}(V_X - V_{TH}) = 0$ at $V_X = V_{TH}$, so the curve transitions smoothly from zero.\n3. **For $V_X > V_{TH}$:** $I_X$ increases **quadratically** (parabolic curve) with respect to $V_X$.\n\n---\n\n### **4. Sketch of $I_X$ versus $V_X$**\n\n```text\n       IX\n        ^\n        |                                   * (Parabolic growth)\n        |                                 *\n        |                               *\n        |                             *\n        |                           *\n        |                        * \n        |                      *\n        |                   .*\n        +------------------+--------------------> VX\n        0                 V_TH\n        <--- Cutoff region ---><-- Saturation region -->\n             (IX = 0)          (IX ∝ (VX - V_TH)²)\n```",
        "format": "markdown",
        "sha256": "2480528f569de207e7165a27d6770a1398b8354ce1e1b9804e4d5ee9e1802bcb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold and a quadratic rise above it, with the device in saturation. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 2567,
        "total_tokens": 3682,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 2567,
        "total_tokens": 3682,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the curve of $I_X$ versus $V_X$, we analyze the operating regions of the NMOS transistor $M_1$ as the input voltage $V_X$ increases from $0\\text{ V}$.\n\n---\n\n### **1. Circuit Analysis**\n* **Source Voltage:** $V_S = 0\\text{ V}$\n* **Drain Voltage:** $V_D = 1\\text{ V} \\implies V_{DS} = 1\\text{ V}$\n* **Gate Voltage:** $V_G = V_X \\implies V_{GS} = V_X$\n* **Drain Current:** $I_X = I_D$\n\nLet:\n* $V_{TH}$ be the threshold voltage of the NMOS transistor.\n* $k_n = \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)$ be the device transconductance parameter.\n\n---\n\n### **2. Operating Regions of $M_1$**\n\n#### **Region 1: Cut-off ($V_X < V_{TH}$)**\n* **Condition:** $V_{GS} < V_{TH}$\n* The transistor is OFF, so no current flows:\n  $$I_X = 0$$\n\n---\n\n#### **Region 2: Saturation ($V_{TH} \\le V_X \\le 1\\text{ V} + V_{TH}$)**\n* **Condition:** $V_{GS} \\ge V_{TH}$ and $V_{DS} \\ge V_{GS} - V_{TH}$\n  $$1\\text{ V} \\ge V_X - V_{TH} \\implies V_X \\le 1\\text{ V} + V_{TH}$$\n* The transistor is in **saturation**, so the current grows quadratically with $V_X$:\n  $$I_X = \\frac{1}{2} k_n (V_X - V_{TH})^2$$\n* At the boundary $V_X = 1\\text{ V} + V_{TH}$:\n  $$I_X = \\frac{1}{2} k_n (1)^2 = \\frac{1}{2}k_n$$\n\n---\n\n#### **Region 3: Triode / Linear ($V_X > 1\\text{ V} + V_{TH}$)**\n* **Condition:** $V_{DS} < V_{GS} - V_{TH} \\implies 1\\text{ V} < V_X - V_{TH}$\n* The transistor enters the **triode region**:\n  $$I_X = k_n \\left[ (V_{GS} - V_{TH})V_{DS} - \\frac{1}{2}V_{DS}^2 \\right]$$\n  Substituting $V_{GS} = V_X$ and $V_{DS} = 1\\text{ V}$:\n  $$I_X = k_n \\left( V_X - V_{TH} - \\frac{1}{2} \\right)$$\n* The current increases **linearly** with $V_X$ with a constant slope of $k_n$.\n\n---\n\n### **3. Summary & Sketch**\n\n| Range of $V_X$ | Region of Operation | $I_X(V_X)$ Behavior |\n| :--- | :--- | :--- |\n| $V_X < V_{TH}$ | **Cut-off** | $I_X = 0$ |\n| $V_{TH} \\le V_X \\le 1\\text{ V} + V_{TH}$ | **Saturation** | Quadratic increase: $\\propto (V_X - V_{TH})^2$ |\n| $V_X > 1\\text{ V} + V_{TH}$ | **Triode** | Linear increase: $\\propto V_X$ |\n\n```text\n       IX\n        ^\n        |                                       / (Linear)\n        |                                      /  Slope = kn\n        |                                     /\n        |                       . - - - - -  *  (at 1 + VTH, IX = 0.5*kn)\n        |                              . '\n        |                         . '    (Quadratic / Parabolic)\n        |                    . '\n        |  (Cutoff)     . '\n--------+-------------*-----------------------------------> VX\n       0|            VTH                 1 + VTH\n```",
        "format": "markdown",
        "sha256": "dbb69e57233d3af790b01131ac9d6fb058bfcd4ae342eaef6b92ebf018c01403"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, quadratic saturation current up to VTH + 1 V, and a roughly linear triode-region rise beyond that point.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 2594,
        "total_tokens": 3686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1619,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 2594,
        "total_tokens": 3686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1619,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find and sketch the relationship between **$I_X$** and **$V_X$**, let us analyze the operating regions of the NMOS transistor $M_1$.\n\n---\n\n### **1. Circuit Parameters**\n* **Gate-Source Voltage:** $V_{GS} = V_X - 0 = V_X$\n* **Drain-Source Voltage:** $V_{DS} = 1\\text{ V} - 0 = 1\\text{ V}$\n* **Drain Current:** $I_X = I_D$\n* Let $V_{TH}$ be the threshold voltage of the NMOS transistor and $k_n' = \\mu_n C_{ox}\\frac{W}{L}$.\n\n---\n\n### **2. Operating Regions as a Function of $V_X$**\n\n#### **Region 1: Cutoff ($V_X < V_{TH}$)**\n* **Condition:** $V_{GS} < V_{TH} \\implies V_X < V_{TH}$\n* The transistor is OFF, so no current flows:\n  $$I_X = 0$$\n\n---\n\n#### **Region 2: Saturation ($V_{TH} \\le V_X \\le 1\\text{ V} + V_{TH}$)**\n* **Condition:** \n  $$V_{GS} \\ge V_{TH} \\quad \\text{and} \\quad V_{DS} \\ge V_{GS} - V_{TH}$$\n  $$1\\text{ V} \\ge V_X - V_{TH} \\implies V_X \\le 1\\text{ V} + V_{TH}$$\n* The drain current follows the square-law saturation equation:\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2$$\n* In this region, $I_X$ increases **quadratically (parabolically)** with $V_X$.\n\n---\n\n#### **Region 3: Triode / Linear ($V_X > 1\\text{ V} + V_{TH}$)**\n* **Condition:** \n  $$V_{DS} < V_{GS} - V_{TH} \\implies 1\\text{ V} < V_X - V_{TH} \\implies V_X > 1\\text{ V} + V_{TH}$$\n* The drain current is given by the triode region equation (with $V_{DS} = 1\\text{ V}$):\n  $$I_X = \\mu_n C_{ox}\\frac{W}{L}\\left[(V_X - V_{TH})V_{DS} - \\frac{1}{2}V_{DS}^2\\right]$$\n  $$I_X = \\mu_n C_{ox}\\frac{W}{L}\\left(V_X - V_{TH} - \\frac{1}{2}\\right)$$\n* In this region, $I_X$ increases **linearly** with $V_X$ with a constant slope of $\\mu_n C_{ox}\\frac{W}{L}$.\n\n---\n\n### **3. Key Transition Points**\n\n| $V_X$ | Region | Current $I_X$ | Shape |\n| :--- | :--- | :--- | :--- |\n| **$V_X < V_{TH}$** | Cutoff | $0$ | Flat at zero |\n| **$V_X = V_{TH}$** | Transition (Cutoff $\\to$ Saturation) | $0$ | Continuous |\n| **$V_X = 1\\text{ V} + V_{TH}$** | Transition (Saturation $\\to$ Triode) | $\\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(1)^2 = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}$ | Continuous value and slope |\n| **$V_X > 1\\text{ V} + V_{TH}$** | Triode | $\\mu_n C_{ox}\\frac{W}{L}\\left(V_X - V_{TH} - 0.5\\right)$ | Straight line (slope $= \\mu_n C_{ox}\\frac{W}{L}$) |\n\n---\n\n### **4. Sketch of $I_X$ versus $V_X$**\n\n```text\n       IX\n        ^\n        |                                       / (Linear: Triode region)\n        |                                      /   Slope = μn*Cox*(W/L)\n        |                                     /\n        |                                    /\n        |                       .--'--------' (1 + VTH, 0.5*μn*Cox*W/L)\n        |                     .'  (Quadratic: Saturation region)\n        |                   .'\n        |                 .'\n        |________________'____________________________> VX\n       0                VTH        1 + VTH\n      (Cutoff: IX = 0)\n```",
        "format": "markdown",
        "sha256": "6fda0e3721dd0ba0de17c0a32d8f43f09d33c0718419cc35fe849b153835f4f1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, a quadratic saturation-region rise up to VTH + 1 V, and a roughly linear triode-region rise beyond it, with the appropriate transition current.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 2893,
        "total_tokens": 3985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1785,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 2893,
        "total_tokens": 3985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1785,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the relationship and sketch $I_X$ versus $V_X$, we determine the operating regions of the NMOS transistor $M_1$ as the gate voltage $V_X$ increases from $0\\text{ V}$.\n\n---\n\n### **1. Circuit Equations**\n\nFrom the given circuit diagram:\n* **Source voltage:** $V_S = 0\\text{ V}$\n* **Gate voltage:** $V_G = V_X \\implies V_{GS} = V_X$\n* **Drain voltage:** $V_D = 1\\text{ V} \\implies V_{DS} = 1\\text{ V}$\n* **Drain current:** $I_X = I_D$\n\nLet $V_{TH}$ be the threshold voltage of the transistor, and $k_n' = \\mu_n C_{ox} \\frac{W}{L}$.\n\n---\n\n### **2. Operating Regions of $M_1$**\n\n#### **Region 1: Cutoff ($V_X < V_{TH}$)**\n* **Condition:** $V_{GS} < V_{TH} \\implies V_X < V_{TH}$\n* **Current:**\n  $$I_X = 0$$\n\n---\n\n#### **Region 2: Saturation ($V_{TH} \\le V_X \\le 1\\text{ V} + V_{TH}$)**\n* **Condition:** \n  $$V_{GS} \\ge V_{TH} \\quad \\text{and} \\quad V_{DS} \\ge V_{GS} - V_{TH}$$\n  $$1\\text{ V} \\ge V_X - V_{TH} \\implies V_X \\le 1\\text{ V} + V_{TH}$$\n* **Current:**\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2$$\n* **Behavior:** $I_X$ increases **quadratically** (parabolically) with $V_X$.\n* **Value at boundary ($V_X = 1\\text{ V} + V_{TH}$):**\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(1\\text{ V})^2 = \\frac{1}{2}k_n'$$\n\n---\n\n#### **Region 3: Triode / Linear Region ($V_X > 1\\text{ V} + V_{TH}$)**\n* **Condition:** \n  $$V_{DS} < V_{GS} - V_{TH} \\implies 1\\text{ V} < V_X - V_{TH} \\implies V_X > 1\\text{ V} + V_{TH}$$\n* **Current:**\n  $$I_X = \\mu_n C_{ox}\\frac{W}{L}\\left[(V_X - V_{TH})V_{DS} - \\frac{1}{2}V_{DS}^2\\right]$$\n  Substituting $V_{DS} = 1\\text{ V}$:\n  $$I_X = \\mu_n C_{ox}\\frac{W}{L}\\left(V_X - V_{TH} - \\frac{1}{2}\\right)$$\n* **Behavior:** $I_X$ increases **linearly** with $V_X$ with a constant slope equal to $\\mu_n C_{ox}\\frac{W}{L}$.\n\n*(Note: The transition between saturation and triode at $V_X = 1\\text{ V} + V_{TH}$ is continuous and smooth in slope).*\n\n---\n\n### **3. Sketch of $I_X$ vs. $V_X$**\n\n```text\n       IX\n        ^\n        |                                        / (Linear: Triode)\n        |                                      /   Slope = μn*Cox*(W/L)\n        |                                    /\n        |                       .. - ' ' ' '\n        |                   . ' \n        |                .'     (Quadratic: Saturation)\n        |             .-'\n        |____________/\n       0+-----------+--------------------+--------------------> VX\n                   V_TH              1 + V_TH\n        |<- Cutoff ->|<-- Saturation --->|<----- Triode ----->|\n```\n\n### **Summary of Key Plot Features:**\n1. **$0 \\le V_X < V_{TH}$:** $I_X = 0$ (zero current along the horizontal axis).\n2. **$V_X = V_{TH}$:** Current begins to conduct.\n3. **$V_{TH} \\le V_X \\le 1\\text{ V} + V_{TH}$:** Quadratic upward curve ($I_X \\propto (V_X - V_{TH})^2$).\n4. **$V_X \\ge 1\\text{ V} + V_{TH}$:** Straight line with a slope of $\\mu_n C_{ox} \\frac{W}{L}$.",
        "format": "markdown",
        "sha256": "31fbf23a149176d09fee16c94c79d2425a9dfaa43eb62e6b242a601ce8c905ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, a quadratic saturation-region rise up to VTH + 1 V, and an approximately linear triode-region rise beyond it, matching the golden solution.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 3161,
        "total_tokens": 4253,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 3161,
        "total_tokens": 4253,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the device shown in the figure **cannot** act as a current source.\n\n---\n\n### **Explanation:**\n\n1. **Circuit Configuration (Diode-Connected Transistor):**\n   * The device is a **PMOS transistor** ($M_1$), where the top terminal is the source (indicated by the inward-pointing arrow), and the bottom terminal is the drain.\n   * Both the **Gate** and the **Drain** are connected to ground ($V_G = 0\\text{ V}$, $V_D = 0\\text{ V}$). \n   * Since $V_G = V_D$, the gate and drain are effectively shorted together, configuring the transistor as a **diode-connected device**.\n\n2. **I–V Characteristics:**\n   * Letting the source voltage be $V_X$, we have:\n     $$V_{SG} = V_S - V_G = V_X - 0 = V_X$$\n     $$V_{SD} = V_S - V_D = V_X - 0 = V_X$$\n   * For $V_X > |V_{THP}|$, the condition for saturation ($V_{SD} > V_{SG} - |V_{THP}|$) is automatically satisfied since $V_X > V_X - |V_{THP}|$.\n   * The resulting current $I_X$ is:\n     $$I_X \\approx \\frac{1}{2}\\mu_p C_{ox}\\frac{W}{L}(V_X - |V_{THP}|)^2$$\n\n3. **Output Resistance:**\n   * A current source must maintain a constant current regardless of the terminal voltage, which requires a **very high (ideally infinite) output impedance** ($R_{\\text{out}} \\to \\infty$).\n   * For this configuration, the small-signal impedance looking into the source terminal is:\n     $$R_{\\text{out}} = \\frac{1}{g_m} \\quad \\left(\\text{or } \\frac{1}{g_m + g_{mb}} \\text{ with body effect}\\right)$$\n   * Because $1/g_m$ is a **low impedance** (typically a few hundred ohms to a few kilohms), the current $I_X$ varies strongly with changes in $V_X$.\n\n### **Conclusion:**\nInstead of acting as a current source, this circuit behaves as a **non-linear resistor / diode**. \n\n*(To act as a current source, a constant bias voltage would need to be applied between the gate and source, with the output taken from the drain where the output impedance is high, i.e., $R_{\\text{out}} \\approx r_O$.)*",
        "format": "markdown",
        "sha256": "6dc9a6374e192299f9c264353c40e7bab170d4af354b7cc8ee7c9a365b6e7b17"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS and its grounded gate/drain connections, explains that the diode-connected device has low small-signal impedance (about 1/gm), and concludes it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 2678,
        "total_tokens": 3757,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2080,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 2678,
        "total_tokens": 3757,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2080,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the device shown in the figure **cannot** act as a current source.\n\n---\n\n### **Detailed Explanation:**\n\n#### 1. **Device Identification and Terminals**\n* The device $M_1$ is a **PMOS transistor**, indicated by the arrow on the upper terminal pointing inward toward the channel. \n* By convention, the terminal with the arrow is the **Source ($S$)**.\n* The other two terminals are:\n  * **Gate ($G$)**: Connected to ground ($V_G = 0\\text{ V}$)\n  * **Drain ($D$)**: Connected to ground ($V_D = 0\\text{ V}$)\n  * **Source ($S$)**: Connected to the terminal voltage $V_X$ carrying current $I_X$.\n\n---\n\n#### 2. **Large-Signal Analysis**\n* The source-to-gate voltage is:\n  $$V_{SG} = V_S - V_G = V_X - 0 = V_X$$\n* The source-to-drain voltage is:\n  $$V_{SD} = V_S - V_D = V_X - 0 = V_X$$\n\nFor $V_X > |V_{THP}|$, the transistor turns on and operates in the **saturation region** because:\n$$V_{SD} = V_X > V_{SG} - |V_{THP}| = V_X - |V_{THP}|$$\n\nIn saturation, the current $I_X$ is given by:\n$$I_X = \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_X - |V_{THP}|)^2$$\n\nAs seen from this equation, the current $I_X$ is **strongly dependent on the terminal voltage $V_X$** (varying quadratically with $V_X$).\n\n---\n\n#### 3. **Small-Signal Output Impedance**\nAn ideal current source must have an **infinite output impedance** (or practically very high, e.g., $r_o$) so that the current remains independent of variations in the terminal voltage.\n\nLooking into the source terminal of $M_1$:\n$$R_{out} = \\frac{\\partial V_X}{\\partial I_X} \\approx \\frac{1}{g_m + g_{mb}} \\parallel r_o \\approx \\frac{1}{g_m}$$\n\nBecause $\\frac{1}{g_m}$ is a **low impedance** (typically hundreds of ohms to a few kilo-ohms), the device acts like a **diode-connected load / resistor** rather than a current source.\n\n---\n\n### **Conclusion**\nFor a MOSFET to function as a current source:\n* Its **Gate** and **Source** voltages must be held at fixed DC potentials to establish a constant $V_{GS}$ ($V_{SG}$).\n* The current must be taken from the **Drain** terminal, which provides a high output impedance ($R_{out} \\approx r_o$). \n\nSince this configuration uses the source as the output node with a grounded gate, it cannot maintain a constant current and **cannot act as a current source**.",
        "format": "markdown",
        "sha256": "b3579bae36321924a83e94dba740cf03a7e0c80979d537411a98556f4fb6e1cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS with its source at VX and gate and drain grounded, and explains that the diode-connected device has low incremental resistance (about 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 3530,
        "total_tokens": 4609,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2834,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 3530,
        "total_tokens": 4609,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2834,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the device in this configuration **cannot** act as a current source.\n\n---\n\n### **Detailed Explanation**\n\n#### 1. **Device Identification**\n* The arrow on the top terminal points **into** the channel, which identifies $M_1$ as a **PMOS transistor**.\n* The top terminal is the **source** ($S$), where the test current $I_X$ enters at node voltage $V_X$.\n* The **gate** ($G$) and **drain** ($D$) are both connected to ground ($V_G = 0\\text{ V}$, $V_D = 0\\text{ V}$).\n\n---\n\n#### 2. **Current-Voltage Relationship**\nFor the PMOS to conduct, the source voltage $V_X$ must be higher than the threshold magnitude $|V_{THp}|$ ($V_X > |V_{THp}|$).\n\n* Source-to-Gate voltage:  \n  $$V_{SG} = V_S - V_G = V_X - 0 = V_X$$\n* Source-to-Drain voltage:  \n  $$V_{SD} = V_S - V_D = V_X - 0 = V_X$$\n\nSince $V_{SD} = V_{SG} > V_{SG} - |V_{THp}|$, the transistor is in the **saturation region**. The current $I_X$ entering the source is:\n$$I_X \\approx \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_X - |V_{THp}|)^2$$\n\nAs seen from this equation, the current $I_X$ **strongly depends on the terminal voltage $V_X$** rather than remaining constant.\n\n---\n\n#### 3. **Output Impedance Analysis**\nAn ideal current source must have an **infinite output impedance** (or at least a very high impedance in practice) so that its current remains constant regardless of the voltage across it.\n\nLooking into the source of $M_1$:\n$$R_{out} = \\frac{dV_X}{dI_X} \\approx \\frac{1}{g_m} \\quad \\left(\\text{or } \\frac{1}{g_m + g_{mb}} \\text{ with body effect}\\right)$$\n\nSince $\\frac{1}{g_m}$ is a **very low impedance** (typically on the order of hundreds of ohms), the device acts like a **resistor / diode-connected load** rather than a current source.\n\n---\n\n### **Conclusion**\nTo make a MOSFET act as a current source:\n* The **source** and **gate** must be held at fixed bias voltages (to keep $V_{GS}$ constant).\n* The current must be drawn from the **drain**, where the small-signal output impedance is large ($R_{out} = r_O$).",
        "format": "markdown",
        "sha256": "72a7f6cc5300e50291d0df52f7de14d24bcaa6614dd1d7096d28d7d4c98cd4b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS with source at VX and gate and drain grounded, and explains that the diode-connected device has low incremental resistance (about 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 2826,
        "total_tokens": 3905,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2192,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 2826,
        "total_tokens": 3905,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2192,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### **1. Circuit Identification and Overview**\n* **Circuit Topology:** **PMOS Common-Source (CS) Amplifier with Source Degeneration**\n* **Transistor ($M_1$):** P-channel MOSFET (PMOS)\n* **Components:**\n  * $R_S$: Source degeneration resistor connected between the source and $V_{DD}$\n  * $R_D$: Drain load resistor connected between the drain and ground\n  * $V_{\\text{in}}$: Input signal applied to the gate\n  * $V_{\\text{out}}$: Output signal taken at the drain\n\n---\n\n### **2. DC Bias and Region of Operation**\n\nTo operate as a linear amplifier, the transistor $M_1$ must be biased in the **saturation (active) region**.\n\n1. **Gate, Source, and Drain Voltages:**\n   $$V_S = V_{DD} - I_D R_S$$\n   $$V_D = I_D R_D = V_{\\text{out}}$$\n   $$V_G = V_{\\text{in}}$$\n\n2. **Source-to-Gate Voltage ($V_{SG}$):**\n   $$V_{SG} = V_S - V_G = V_{DD} - I_D R_S - V_{\\text{in}}$$\n\n3. **Saturation Conditions for PMOS:**\n   * $V_{SG} > |V_{THP}|$ (to turn the device ON)\n   * $V_{SD} \\ge V_{SG} - |V_{THP}| \\implies V_D \\le V_G + |V_{THP}|$\n\n4. **Drain Current (in Saturation):**\n   $$I_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)(V_{SG} - |V_{THP}|)^2$$\n\n---\n\n### **3. Small-Signal Analysis**\n\n#### **A. Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)**\n\n* **Ideal Case (Neglecting Channel-Length Modulation $\\lambda = 0$ and Body Effect $\\gamma = 0$):**\n  $$A_v = -\\frac{g_m R_D}{1 + g_m R_S} \\approx -\\frac{R_D}{\\frac{1}{g_m} + R_S}$$\n\n  * If $g_m R_S \\gg 1$:\n    $$A_v \\approx -\\frac{R_D}{R_S}$$\n    *(The gain becomes predominantly determined by the ratio of the passive resistors, making it highly linear and independent of transistor parameters.)*\n\n* **Including Body Effect ($g_{mb} \\neq 0$):**\n  *(Assuming the PMOS n-well/bulk is connected to $V_{DD}$)*\n  $$A_v = -\\frac{g_m R_D}{1 + (g_m + g_{mb})R_S}$$\n\n* **Including Channel-Length Modulation ($r_O < \\infty$):**\n  $$A_v = -\\frac{g_m r_O R_D}{r_O + R_D + R_S + g_m r_O R_S}$$\n\n---\n\n#### **B. Input and Output Impedance**\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  Since the gate is insulated:\n  $$R_{\\text{in}} \\to \\infty \\quad \\text{(at low frequencies)}$$\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  Looking into the drain terminal:\n  $$R_{\\text{out}} = R_D \\parallel R_{\\text{out,drain}}$$\n  Where the impedance looking up into the PMOS drain is boosted by the degeneration:\n  $$R_{\\text{out,drain}} = r_O + R_S + g_m r_O R_S \\approx r_O (1 + g_m R_S)$$\n  \n  Therefore:\n  $$R_{\\text{out}} \\approx R_D \\parallel [r_O(1 + g_m R_S)]$$\n  *(For $r_O \\to \\infty$, $R_{\\text{out}} = R_D$)*\n\n---\n\n### **4. Key Effects of Source Degeneration ($R_S$)**\n\n| Parameter | Effect of adding $R_S$ | Trade-off / Benefit |\n| :--- | :--- | :--- |\n| **Linearity** | **Increases** | Reduces harmonic distortion and extends input linear range. |\n| **Gain Stability** | **Increases** | Gain becomes less sensitive to variations in temperature and process ($g_m$). |\n| **Voltage Gain** | **Decreases** | Gain is reduced by the factor $(1 + g_m R_S)$. |\n| **Bandwidth** | **Increases** | Gain-bandwidth trade-off expands the circuit's operating frequency range. |\n| **Output Resistance** | **Increases** | Looking into the drain, the resistance is multiplied roughly by $(1 + g_m R_S)$. |",
        "format": "markdown",
        "sha256": "188176a2a84d719ce63295666318a5daab5ea3e58025f5dfe26ad436cf947f2e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain, including valid body-effect and channel-length-modulation refinements.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 3748,
        "total_tokens": 4863,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2591,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 3748,
        "total_tokens": 4863,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2591,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### **1. Circuit Identification and Overview**\n* **Circuit Topology:** **PMOS Common-Source (CS) Amplifier with Source Degeneration**\n* **Active Device:** $M_1$ is a P-channel MOSFET (PMOS).\n* **Resistors:**\n  * $R_S$: Source degeneration resistor connected between the supply voltage ($V_{DD}$) and the source of $M_1$.\n  * $R_D$: Drain load resistor connected between the drain of $M_1$ and ground.\n* **Input/Output Ports:**\n  * Input voltage ($V_{\\text{in}}$) is applied to the **Gate**.\n  * Output voltage ($V_{\\text{out}}$) is taken from the **Drain**.\n\n---\n\n### **2. DC (Large-Signal) Operating Conditions**\n\nFor the amplifier to operate properly in the **saturation region** (where it acts as a linear voltage amplifier):\n\n1. **Threshold Condition:**\n   $$V_{SG} > |V_{THP}| \\implies V_S - V_{\\text{in}} > |V_{THP}|$$\n\n2. **Saturation Condition:**\n   $$V_{SD} \\ge V_{SG} - |V_{THP}| \\implies V_{\\text{out}} \\le V_{\\text{in}} + |V_{THP}|$$\n\n3. **Node Voltages and Drain Current ($I_D$):**\n   * Source voltage: $V_S = V_{DD} - I_D R_S$\n   * Drain voltage (DC output): $V_D = V_{\\text{out}} = I_D R_D$\n   * Drain current (neglecting channel-length modulation):\n     $$I_D = \\frac{1}{2} \\mu_p C_{\\text{ox}} \\left(\\frac{W}{L}\\right) \\left(V_{DD} - I_D R_S - V_{\\text{in}} - |V_{THP}|\\right)^2$$\n\n---\n\n### **3. Small-Signal Analysis**\n\n#### **A. Small-Signal Parameters**\n* **Transconductance:** $g_m = \\mu_p C_{\\text{ox}} \\left(\\frac{W}{L}\\right) (V_{SG} - |V_{THP}|) = \\frac{2I_D}{V_{OV}}$\n* **Transistor Output Resistance:** $r_o \\approx \\frac{1}{\\lambda I_D}$\n* **Body Effect Transconductance:** $g_{mb} = \\eta g_m$ (applicable if the bulk/n-well is tied to $V_{DD}$ rather than the source).\n\n---\n\n#### **B. Small-Signal Voltage Gain ($A_v$)**\n\n* **Ideal Case ($r_o \\to \\infty$, negligible body effect):**\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -\\frac{g_m R_D}{1 + g_m R_S}$$\n\n  * If $g_m R_S \\gg 1$ (strong degeneration), the gain simplifies to:\n    $$A_v \\approx -\\frac{R_D}{R_S}$$\n  *(The negative sign confirms that the circuit is an **inverting** amplifier).*\n\n* **With Channel-Length Modulation ($r_o$) and Body Effect ($g_{mb}$):**\n  The effective transconductance $G_m$ and voltage gain are:\n  $$A_v = -G_m (R_{\\text{out,drain}} \\parallel R_D) = -\\frac{g_m R_D}{1 + (g_m + g_{mb})R_S + \\frac{R_S + R_D}{r_o}}$$\n\n---\n\n#### **C. Input and Output Impedance**\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  $$R_{\\text{in}} = \\infty \\quad (\\text{at low frequencies, due to the insulated gate})$$\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  Looking into the output node ($V_{\\text{out}}$):\n  $$R_{\\text{out}} = R_D \\parallel R_{\\text{out,drain}}$$\n  where:\n  $$R_{\\text{out,drain}} = r_o + R_S + (g_m + g_{mb}) r_o R_S \\approx r_o [1 + (g_m + g_{mb})R_S]$$\n  If $r_o \\to \\infty$:\n  $$R_{\\text{out}} \\approx R_D$$\n\n---\n\n### **4. Effects of Source Degeneration ($R_S$)**\n\n| Parameter | Without $R_S$ ($R_S=0$) | With $R_S$ ($R_S > 0$) | Effect of $R_S$ |\n| :--- | :--- | :--- | :--- |\n| **Voltage Gain ($|A_v|$)** | $g_m R_D$ | $\\frac{g_m R_D}{1 + g_m R_S}$ | **Decreases** |\n| **Linearity** | Lower | Higher | **Improves** (gain becomes less dependent on $g_m$) |\n| **Bandwidth** | Smaller | Larger | **Increases** (due to negative feedback) |\n| **Drain Output Resistance** | $r_o$ | $\\approx r_o(1 + g_m R_S)$ | **Increases** |",
        "format": "markdown",
        "sha256": "c2d47b68864f373c55a1a844406fd37c227ff1e752a450a3550c3fa0a5aa919f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS), satisfying the full-credit rule. The body-effect and output-resistance refinements are also consistent.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 3532,
        "total_tokens": 4647,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2279,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 3532,
        "total_tokens": 4647,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2279,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Identification & Overview\n* **Topology:** **Common-Source (CS) Amplifier with Source Degeneration** (using a PMOS transistor, $M_1$).\n* **Components:**\n  * **$M_1$:** PMOS transistor.\n  * **$R_S$:** Source degeneration resistor.\n  * **$R_D$:** Drain load resistor.\n  * **$V_{\\text{in}}$:** AC/DC input signal applied to the gate.\n  * **$V_{\\text{out}}$:** Output voltage taken from the drain.\n\n---\n\n### 2. DC (Biasing) Analysis\n\nTo operate as a linear amplifier, the PMOS transistor $M_1$ must be biased in the **Saturation (Active) region**.\n\n#### Conditions for Saturation:\n1. $V_{SG} > |V_{THP}|$ (Inversion layer formed)\n2. $V_{SD} \\ge V_{SG} - |V_{THP}| = V_{OV}$ (Saturation condition)\n\n#### DC Equations:\n1. **Source Voltage:**\n   $$V_S = V_{DD} - I_D R_S$$\n\n2. **Drain Voltage (DC Output):**\n   $$V_D = V_{\\text{out, DC}} = I_D R_D$$\n\n3. **Gate-to-Source Voltage ($V_{SG}$):**\n   $$V_{SG} = V_S - V_G = (V_{DD} - I_D R_S) - V_{\\text{in, DC}}$$\n\n4. **Drain Current ($I_D$) in Saturation:**\n   $$I_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)(V_{SG} - |V_{THP}|)^2 (1 + \\lambda |V_{SD}|)$$\n   *(Neglecting channel-length modulation $\\lambda \\approx 0$)*:\n   $$I_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)\\left(V_{DD} - I_D R_S - V_{\\text{in, DC}} - |V_{THP}|\\right)^2$$\n\n---\n\n### 3. Small-Signal AC Analysis\n\nUsing the small-signal model for the PMOS transistor where:\n* Transconductance: $g_m = \\sqrt{2\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)I_D} = \\frac{2I_D}{V_{OV}}$\n* Transistor output resistance: $r_o = \\frac{1}{\\lambda I_D}$\n\n---\n\n#### A. Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)\n\n1. **Assuming an ideal transistor ($r_o \\to \\infty$ and no body effect):**\n   * The small-signal current flowing from source to drain is:\n     $$i_d = g_m v_{sg} = g_m (v_s - v_{\\text{in}})$$\n   * Since $V_{DD}$ is an AC ground, the source voltage is:\n     $$v_s = -i_d R_S$$\n   * Substituting $v_s$:\n     $$i_d = g_m (-i_d R_S - v_{\\text{in}}) \\implies i_d (1 + g_m R_S) = -g_m v_{\\text{in}} \\implies i_d = -\\frac{g_m v_{\\text{in}}}{1 + g_m R_S}$$\n   * The output voltage is:\n     $$v_{\\text{out}} = i_d R_D = -\\frac{g_m R_D}{1 + g_m R_S} v_{\\text{in}}$$\n\n   $$\\boxed{A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -\\frac{g_m R_D}{1 + g_m R_S} = -\\frac{R_D}{\\frac{1}{g_m} + R_S}}$$\n\n   * **Negative sign:** Indicates that the amplifier is **inverting** (a $180^\\circ$ phase shift between $v_{\\text{in}}$ and $v_{\\text{out}}$).\n   * If $g_m R_S \\gg 1$, the gain simplifies to:\n     $$A_v \\approx -\\frac{R_D}{R_S}$$\n\n---\n\n2. **Including Channel-Length Modulation ($r_o < \\infty$):**\n   $$A_v \\approx -\\frac{g_m R_D}{1 + g_m R_S + \\frac{R_D + R_S}{r_o}}$$\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the gate of the PMOS transistor at low-to-moderate frequencies:\n$$\\boxed{R_{\\text{in}} = \\infty}$$\n*(Dominated by gate oxide capacitance $C_{gs}, C_{gd}$ at high frequencies).*\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nLooking into the output node ($V_{\\text{out}}$) with $v_{\\text{in}} = 0$:\n$$R_{\\text{out}} = R_D \\parallel R_{\\text{out, drain}}$$\n\nWhere the resistance looking into the drain of $M_1$ is:\n$$R_{\\text{out, drain}} = r_o + R_S + g_m r_o R_S \\approx r_o(1 + g_m R_S)$$\n\n* If $r_o \\to \\infty$:\n  $$\\boxed{R_{\\text{out}} \\approx R_D}$$\n\n---\n\n### 4. Effects of Source Degeneration ($R_S$)\n\n| Parameter | Effect of adding $R_S$ | Reason |\n| :--- | :--- | :--- |\n| **Voltage Gain ($|A_v|$)** | **Decreases** | Negative feedback reduces effective transconductance ($G_m = \\frac{g_m}{1 + g_m R_S}$). |\n| **Linearity** | **Improves significantly** | Gain becomes determined by the ratio $\\frac{R_D}{R_S}$ rather than the nonlinear $g_m$. |\n| **Bandwidth** | **Increases** | Gain-bandwidth product trade-off. |\n| **Gain Stability** | **Improves** | Desensitizes the gain to variations in temperature, process parameters ($\\mu_p, V_{THP}$), and DC bias point. |\n| **Output Resistance** | **Increases** | Source degeneration boosts the effective drain output impedance $r_{out}$. |",
        "format": "markdown",
        "sha256": "d1cf4299f469a86964e94467e5f1d0879d26dec3e0605bdb4babd8a885e8b477"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and derives the inverting gain −gmRD/(1 + gmRS). Its finite-ro refinement is also consistent with the circuit.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 3301,
        "total_tokens": 4416,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1766,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 3301,
        "total_tokens": 4416,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1766,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is an **NMOS Common-Drain Amplifier**, commonly referred to as a **Source Follower**. \n\nIn this configuration:\n* The **input ($V_{\\text{in}}$)** is applied to the **Gate**.\n* The **output ($V_{\\text{out}}$)** is taken from the **Source**.\n* The **Drain** is connected directly to the positive supply rail ($V_{DD}$), which acts as an AC ground.\n\n---\n\n### 1. Large-Signal (DC) Operation\n\nFor the transistor $M_1$ to operate in the **saturation (active) region**, the drain-to-source voltage must satisfy:\n$$V_{DS} \\ge V_{GS} - V_{TH} \\implies V_{DD} - V_{\\text{out}} \\ge V_{\\text{in}} - V_{\\text{out}} - V_{TH} \\implies V_{DD} \\ge V_{\\text{in}} - V_{TH}$$\n\nAssuming saturation, the drain current is given by:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2$$\n\nSince the drain current also flows through the source resistor $R_S$:\n$$V_{\\text{out}} = I_D R_S$$\n$$V_{\\text{out}} = V_{\\text{in}} - V_{GS}$$\n\nBecause $V_{\\text{out}}$ closely follows variations in $V_{\\text{in}}$ (shifted downward by $V_{GS}$), this circuit is called a **source follower**.\n\n---\n\n### 2. Small-Signal Analysis\n\nLet:\n* $g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})$ (transconductance)\n* $g_{mb} = \\eta \\, g_m$ (body-effect transconductance, if substrate is tied to ground)\n* $r_o = \\frac{1}{\\lambda I_D}$ (transistor output resistance)\n\n#### A. Voltage Gain ($A_v$)\n1. **Ideal Case (ignoring body effect $g_{mb}=0$ and channel-length modulation $r_o \\to \\infty$):**\n   $$v_{\\text{out}} = g_m (v_{\\text{in}} - v_{\\text{out}}) R_S$$\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_S}{1 + g_m R_S}$$\n   * If $g_m R_S \\gg 1$, then **$A_v \\approx 1$** (positive, non-inverting, slightly less than unity).\n\n2. **Complete Case (including $r_o$ and body effect $g_{mb}$):**\n   $$A_v = \\frac{g_m}{g_m + g_{mb} + \\frac{1}{r_o} + \\frac{1}{R_S}} = \\frac{g_m (R_S \\parallel r_o)}{1 + (g_m + g_{mb})(R_S \\parallel r_o)}$$\n   * The body effect further reduces the gain below 1 and introduces non-linearity.\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the gate:\n$$R_{\\text{in}} \\approx \\infty \\quad \\text{(at low frequencies)}$$\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nLooking back into the output terminal ($V_{\\text{out}}$) with $V_{\\text{in}} = 0$:\n$$R_{\\text{out}} = \\frac{1}{g_m + g_{mb}} \\parallel r_o \\parallel R_S \\approx \\frac{1}{g_m}$$\n\nThis yields a **very low output resistance**.\n\n---\n\n### 3. Summary of Performance Characteristics\n\n| Parameter | Formula (Approximation) | Typical Value |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\frac{g_m R_S}{1 + (g_m + g_{mb}) R_S}$ | $\\approx 0.7 - 0.9$ (Positive, $< 1$) |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ | Very High |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_m} \\parallel R_S$ | Low ($\\sim 100\\,\\Omega - 1\\,\\text{k}\\Omega$) |\n\n---\n\n### 4. Primary Applications\n1. **Voltage Buffer:** Bridges a high-impedance signal source to a low-impedance load without loading down the preceding stage.\n2. **DC Level Shifter:** Shifts an input voltage down by the value of $V_{GS}$.",
        "format": "markdown",
        "sha256": "385e5c73df78f702a930407718dcc7d1e3a15bde6c796b90b6004a45585952d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, sub-unity gain gm·RS/(1 + gm·RS). The additional body-effect, output-resistance, and application discussion is consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2139,
        "total_tokens": 3249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1033,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2139,
        "total_tokens": 3249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1033,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Identification\nThe circuit is an **NMOS Common-Drain (CD) Amplifier**, also widely known as a **Source Follower**. \n* **Input ($V_{\\text{in}}$):** Applied at the **Gate** of $M_1$.\n* **Output ($V_{\\text{out}}$):** Taken from the **Source** of $M_1$.\n* **Drain:** Connected to the constant supply voltage $V_{DD}$ (which acts as an AC ground).\n* **Load:** A resistor $R_S$ connected between the source and ground.\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\n1. **Cutoff Region ($V_{\\text{in}} < V_{TH}$):**\n   * If the input voltage is below the threshold voltage ($V_{TH}$), the transistor is **OFF**.\n   * Current $I_D = 0$, so:\n     $$V_{\\text{out}} = 0$$\n\n2. **Saturation Region ($V_{\\text{in}} \\ge V_{TH}$):**\n   * As $V_{\\text{in}}$ increases, $M_1$ turns ON and operates in saturation (since $V_D = V_{DD}$ is high, keeping $V_{DS} \\ge V_{GS} - V_{TH}$).\n   * The drain current in saturation (ignoring channel-length modulation) is given by:\n     $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2 = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{\\text{in}} - V_{\\text{out}} - V_{TH})^2$$\n   * By Ohm’s Law at the source resistor:\n     $$I_D = \\frac{V_{\\text{out}}}{R_S}$$\n   * Equating the two expressions:\n     $$\\frac{V_{\\text{out}}}{R_S} = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{\\text{in}} - V_{\\text{out}} - V_{TH})^2$$\n   * Since $V_{\\text{out}} = V_{\\text{in}} - V_{GS}$, the output voltage **follows** the input voltage, shifted down by the gate-to-source voltage $V_{GS}$.\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\nLet:\n* $g_m$: Transconductance of $M_1$ ($g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})$)\n* $g_{mb}$: Body-effect transconductance ($g_{mb} = \\eta g_m$)\n* $r_o$: Output resistance due to channel-length modulation\n\n#### A. Small-Signal Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)\n\n* **Ideal Case** (ignoring channel-length modulation $r_o \\to \\infty$ and body effect $g_{mb} = 0$):\n  $$A_v = \\frac{g_m R_S}{1 + g_m R_S}$$\n  * Since $g_m R_S > 0$, the voltage gain is **always less than 1** ($A_v < 1$), but approaches unity ($A_v \\approx 1$) if $g_m R_S \\gg 1$.\n\n* **Practical Case** (including body effect and $r_o$):\n  $$A_v = \\frac{g_m (R_S \\parallel r_o)}{1 + (g_m + g_{mb})(R_S \\parallel r_o)}$$\n  *(Note: Because the bulk is typically grounded while the source potential varies, the body effect further reduces the gain).*\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the gate of the MOSFET at low-to-medium frequencies:\n$$R_{\\text{in}} \\approx \\infty$$\n*(In practice, it is limited only by gate oxide leakage and high-frequency gate capacitance $C_{gs}, C_{gd}$).*\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nLooking back into the source terminal:\n* **Excluding $R_S$:**\n  $$R_{\\text{out, transistor}} = \\frac{1}{g_m + g_{mb}} \\parallel r_o \\approx \\frac{1}{g_m}$$\n* **Total Output Impedance (including $R_S$):**\n  $$R_{\\text{out}} = \\frac{1}{g_m + g_{mb}} \\parallel r_o \\parallel R_S \\approx \\frac{1}{g_m} \\parallel R_S \\approx \\frac{1}{g_m}$$\n*(This provides a **low output impedance**).*\n\n---\n\n### 4. Summary of Characteristics\n\n| Parameter | Value / Characteristic | Description |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\approx 1$ ($A_v < 1$, non-inverting) | Output follows input in phase |\n| **Input Impedance ($R_{\\text{in}}$)** | Very High ($\\approx \\infty$) | Draws negligible current from source |\n| **Output Impedance ($R_{\\text{out}}$)** | Low ($\\approx \\frac{1}{g_m}$) | Can drive low-resistance loads |\n| **Bandwidth** | Very Wide | Minimal Miller effect (since drain is AC grounded) |\n\n---\n\n### 5. Primary Applications\n1. **Voltage Buffer / Isolation Stage:** Used between a high-impedance source and a low-impedance load to prevent signal attenuation due to loading effects.\n2. **DC Level Shifter:** Shifts the DC bias of an AC signal downwards by $V_{GS}$.\n3. **Output Driver:** Used as the output stage in multistage amplifiers due to its low output resistance and high current-driving capability.",
        "format": "markdown",
        "sha256": "71373578ed1fe74d4c5b319c6f09697ec4f8b0e6b56626081d952ffd36c07ccd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain gm·RS/(1 + gm·RS). The additional body-effect, ro, and output-resistance analysis is consistent with the topology.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2303,
        "total_tokens": 3413,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 918,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2303,
        "total_tokens": 3413,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 918,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is an **NMOS Common-Drain (CD) Amplifier**, commonly known as a **Source Follower**.\n\n---\n\n### 1. Circuit Topology\n* **Transistor $M_1$:** N-channel MOSFET.\n* **Drain Terminal:** Connected directly to the positive DC supply voltage ($V_{DD}$).\n* **Gate Terminal:** Receives the input signal ($V_{\\text{in}}$).\n* **Source Terminal:** Provides the output signal ($V_{\\text{out}}$) and is connected to ground through the source resistor $R_S$.\n\n---\n\n### 2. Large-Signal (DC) Behavior\nAssuming $M_1$ operates in the **saturation region**:\n1. The drain-to-source current $I_D$ is given by:\n   $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2$$\n2. Since the current through $R_S$ is equal to $I_D$:\n   $$V_{\\text{out}} = I_D R_S$$\n3. Because $V_{GS} = V_{\\text{in}} - V_{\\text{out}}$, we have:\n   $$V_{\\text{out}} = V_{\\text{in}} - V_{GS} = V_{\\text{in}} - V_{TH} - \\sqrt{\\frac{2 I_D}{\\mu_n C_{ox} (W/L)}}$$\n4. **Condition for Saturation:**\n   $$V_{DS} \\ge V_{GS} - V_{TH} \\implies V_{DD} - V_{\\text{out}} \\ge V_{\\text{in}} - V_{\\text{out}} - V_{TH} \\implies V_{\\text{in}} \\le V_{DD} + V_{TH}$$\n\n---\n\n### 3. Small-Signal AC Analysis\n\n#### A. Voltage Gain ($A_v$)\nUsing the small-signal model where $g_m$ is the transconductance, $r_o$ is the channel-length modulation resistance, and $g_{mb}$ is the body-effect transconductance:\n\n* **Ideal Case ($r_o \\to \\infty$ and neglecting body effect $g_{mb} = 0$):**\n  $$v_{gs} = v_{\\text{in}} - v_{\\text{out}}$$\n  $$g_m (v_{\\text{in}} - v_{\\text{out}}) = \\frac{v_{\\text{out}}}{R_S}$$\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_S}{1 + g_m R_S} \\approx 1 \\quad (\\text{if } g_m R_S \\gg 1)$$\n\n* **Complete Formulation (including $r_o$ and body effect $g_{mb}$):**\n  $$A_v = \\frac{g_m (R_S \\parallel r_o)}{1 + (g_m + g_{mb})(R_S \\parallel r_o)} = \\frac{g_m}{g_m + g_{mb} + \\frac{1}{r_o} + \\frac{1}{R_S}}$$\n  *(The gain is strictly positive and slightly less than unity, typically between $0.7$ and $0.9$.)*\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking directly into the insulated gate of the MOSFET at low-to-medium frequencies:\n$$R_{\\text{in}} \\approx \\infty$$\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nSetting $v_{\\text{in}} = 0$ and looking into the source terminal:\n$$R_{\\text{out}} = \\frac{1}{g_m + g_{mb}} \\parallel r_o \\parallel R_S \\approx \\frac{1}{g_m}$$\n*(This results in a relatively **low output impedance**.)*\n\n---\n\n### 4. Key Characteristics and Summary\n\n| Parameter | Value / Property |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | $A_v \\lesssim 1$ (In-phase, non-inverting) |\n| **Input Impedance ($R_{\\text{in}}$)** | Very High ($\\approx \\infty$) |\n| **Output Impedance ($R_{\\text{out}}$)** | Low ($\\approx 1/g_m$) |\n| **Current / Power Gain** | High |\n| **Primary Application** | **Voltage Buffer / Impedance Transformer** (used to drive low-impedance loads from high-impedance sources without signal attenuation). |",
        "format": "markdown",
        "sha256": "0954f3e00af071d5145678027c9029c791fc1b84d7270ac67a91ad714b75ff1d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, gm·RS/(1 + gm·RS). The additional small-signal and output-impedance details are consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2352,
        "total_tokens": 3462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2352,
        "total_tokens": 3462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Identification\nThe circuit is an **NMOS Common-Gate (CG) Amplifier** with a resistive load:\n* **Transistor:** $M_1$ (NMOS)\n* **Gate terminal:** Connected directly to the supply voltage $V_{DD}$ (acting as an AC ground).\n* **Source terminal:** Receives the input signal ($V_{\\text{in}}$).\n* **Drain terminal:** Connected to $V_{DD}$ through a load resistor $R_D$, where the output signal ($V_{\\text{out}}$) is taken.\n\n---\n\n### 2. Large-Signal / DC Transfer Characteristics\n\nAs the input voltage $V_{\\text{in}}$ varies, the transistor transitions through three regions of operation:\n\n#### A. Cutoff Region ($V_{\\text{in}} > V_{DD} - V_{TH}$)\n* The gate-to-source voltage is $V_{GS} = V_{DD} - V_{\\text{in}}$.\n* If $V_{\\text{in}} > V_{DD} - V_{TH}$, then $V_{GS} < V_{TH}$, so $M_1$ is **OFF**.\n* No drain current flows ($I_D = 0$).\n* **Output Voltage:** \n  $$V_{\\text{out}} = V_{DD}$$\n\n---\n\n#### B. Saturation Region ($V_{\\text{in}} < V_{DD} - V_{TH}$ and $V_{\\text{out}} \\ge V_{DD} - V_{TH}$)\n* When $V_{\\text{in}}$ drops below $V_{DD} - V_{TH}$, $M_1$ turns **ON**.\n* The transistor operates in saturation as long as:\n  $$V_{DS} \\ge V_{GS} - V_{TH} \\implies V_{\\text{out}} - V_{\\text{in}} \\ge (V_{DD} - V_{\\text{in}}) - V_{TH} \\implies V_{\\text{out}} \\ge V_{DD} - V_{TH}$$\n* Neglecting channel-length modulation ($\\lambda = 0$) and body effect:\n  $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n* **Output Voltage:**\n  $$V_{\\text{out}} = V_{DD} - I_D R_D = V_{DD} - \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} R_D (V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n* Since decreasing $V_{\\text{in}}$ increases $I_D$, $V_{\\text{out}}$ decreases (or conversely, an increase in $v_{\\text{in}}$ causes an increase in $v_{\\text{out}}$), making it a **non-inverting** stage.\n\n---\n\n#### C. Triode (Linear) Region ($V_{\\text{out}} < V_{DD} - V_{TH}$)\n* As $V_{\\text{in}}$ decreases further, the current $I_D$ causes $V_{\\text{out}}$ to drop below $V_{DD} - V_{TH}$, pushing $M_1$ into the triode region.\n* **Drain Current:**\n  $$I_D = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_{DD} - V_{\\text{in}} - V_{TH})(V_{\\text{out}} - V_{\\text{in}}) - \\frac{1}{2}(V_{\\text{out}} - V_{\\text{in}})^2 \\right]$$\n* In this region, the gain degrades, and $V_{\\text{out}}$ tracks closer to $V_{\\text{in}}$ as the transistor behaves like a resistor.\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\nAssuming $M_1$ is biased in the **saturation region**:\n\n#### A. Small-Signal Voltage Gain ($A_v$)\n1. **Ideal Case** (neglecting body effect $g_{mb} = 0$ and channel-length modulation $r_O \\to \\infty$):\n   * Small-signal gate-source voltage: $v_{gs} = v_g - v_s = 0 - v_{\\text{in}} = -v_{\\text{in}}$\n   * Small-signal drain current: $i_d = g_m v_{gs} = -g_m v_{\\text{in}}$\n   * Output voltage: $v_{\\text{out}} = -i_d R_D = -(-g_m v_{\\text{in}}) R_D = +g_m R_D v_{\\text{in}}$\n   \n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = + g_m R_D$$\n\n2. **Including Body Effect ($g_{mb}$) and Output Impedance ($r_O$):**\n   * Since the body (substrate) is typically tied to ground ($V_B = 0$), $v_{bs} = -v_{\\text{in}}$.\n   \n   $$A_v = \\frac{(g_m + g_{mb})r_O + 1}{r_O + R_D} R_D \\approx (g_m + g_{mb}) R_D \\quad (\\text{if } r_O \\gg R_D)$$\n\n---\n\n#### B. Input Resistance ($R_{\\text{in}}$)\nLooking into the source terminal:\n* **Ideal ($r_O \\to \\infty$):**\n  $$R_{\\text{in}} = \\frac{1}{g_m + g_{mb}} \\approx \\frac{1}{g_m}$$\n* **With finite $r_O$:**\n  $$R_{\\text{in}} = \\frac{R_D + r_O}{1 + (g_m + g_{mb}) r_O} \\approx \\frac{1}{g_m + g_{mb}} + \\frac{R_D}{(g_m + g_{mb})r_O}$$\n\n*(The input impedance is relatively **low**).*\n\n---\n\n#### C. Output Resistance ($R_{\\text{out}}$)\nLooking into the drain terminal:\n* **Ideal ($r_O \\to \\infty$):**\n  $$R_{\\text{out}} = R_D$$\n* **With finite $r_O$:**\n  $$R_{\\text{out}} = R_D \\parallel r_O$$\n\n---\n\n### 4. Summary of Key Properties\n\n| Parameter | Ideal Value | Practical Value |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $+g_m R_D$ (Non-inverting) | $\\approx (g_m + g_{mb}) R_D$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\frac{1}{g_m}$ (Low) | $\\approx \\frac{1}{g_m + g_{mb}}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $R_D$ (Moderate) | $R_D \\parallel r_O$ |\n\n### Main Advantages & Applications:\n1. **High-Frequency Performance:** Because the gate is tied to AC ground, the drain-to-gate capacitance ($C_{gd}$) does **not** experience the Miller effect, giving the common-gate stage a significantly wider bandwidth compared to a common-source stage.\n2. **Impedance Matching / Current Buffering:** Its low input impedance makes it ideal for applications requiring low-impedance matching (e.g., $50\\,\\Omega$ inputs in RF front-ends) or as a current buffer in cascode configurations.",
        "format": "markdown",
        "sha256": "13559063124e372f446c05c6cfb6d2da3946d91f8f77e806b1b5deff8460f77f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the essential results: non-inverting gain of approximately +gmRD and input resistance of approximately 1/gm. The additional analyses are consistent with reasonable stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 4009,
        "total_tokens": 5090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2257,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 4009,
        "total_tokens": 5090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2257,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the given circuit.\n\n---\n\n### 1. Circuit Identification & Topology\n* **Transistor Type:** $M_1$ is an **NMOS** transistor.\n* **Configuration:** **Common-Gate (CG) Amplifier**.\n  * **Gate:** Connected to the DC supply voltage $V_{DD}$ (which serves as an AC ground for small-signal operation).\n  * **Input ($V_{\\text{in}}$):** Applied at the **source** terminal.\n  * **Output ($V_{\\text{out}}$):** Taken from the **drain** terminal across the load resistor $R_D$.\n\n---\n\n### 2. Large-Signal (DC) Operation & Transfer Characteristics\n\nAs the input voltage $V_{\\text{in}}$ varies from $V_{DD}$ down to $0\\text{ V}$, the transistor transitions through different operating regions:\n\n#### A. Cutoff Region ($V_{\\text{in}} > V_{DD} - V_{TH1}$)\n* The gate-to-source voltage is:\n  $$V_{GS} = V_{DD} - V_{\\text{in}}$$\n* If $V_{GS} < V_{TH1}$ (i.e., $V_{\\text{in}} > V_{DD} - V_{TH1}$), the transistor is **OFF** ($I_D = 0$).\n* No current flows through $R_D$:\n  $$V_{\\text{out}} = V_{DD}$$\n\n#### B. Saturation Region ($V_{\\text{in}} \\le V_{DD} - V_{TH1}$ and $V_{\\text{out}} \\ge V_{DD} - V_{TH1}$)\n* As $V_{\\text{in}}$ decreases below $V_{DD} - V_{TH1}$, $M_1$ turns **ON** in saturation.\n* The drain current (neglecting channel-length modulation) is:\n  $$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}\\left(V_{DD} - V_{\\text{in}} - V_{TH1}\\right)^2$$\n* The output voltage is:\n  $$V_{\\text{out}} = V_{DD} - I_D R_D = V_{DD} - \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}R_D\\left(V_{DD} - V_{\\text{in}} - V_{TH1}\\right)^2$$\n* As $V_{\\text{in}}$ drops, $I_D$ increases quadratically, causing $V_{\\text{out}}$ to decrease.\n\n#### C. Triode (Linear) Region ($V_{\\text{out}} < V_{DD} - V_{TH1}$)\n* When $V_{\\text{out}}$ drops such that $V_{DS} < V_{GS} - V_{TH1}$ (which corresponds to $V_{\\text{out}} < V_{DD} - V_{TH1}$), $M_1$ enters the **triode region**:\n  $$I_D = \\mu_n C_{ox}\\frac{W}{L}\\left[\\left(V_{DD} - V_{\\text{in}} - V_{TH1}\\right)(V_{\\text{out}} - V_{\\text{in}}) - \\frac{1}{2}(V_{\\text{out}} - V_{\\text{in}})^2\\right]$$\n  $$V_{\\text{out}} = V_{DD} - I_D R_D$$\n\n---\n\n### 3. Small-Signal Analysis (Assuming Saturation)\n\nIn small-signal analysis, $V_{DD}$ is replaced with AC ground:\n* $v_g = 0$\n* $v_s = v_{\\text{in}} \\implies v_{gs} = -v_{\\text{in}}$\n* $v_b = 0 \\implies v_{bs} = -v_{\\text{in}}$ (accounting for body effect)\n\n```\n        v_out\n          o-------+--------------+\n          |       |              |\n          |      [ ] r_O        [ ] R_D\n          |       |              |\n       +  |       |              |\n v_gs [ ] v       +-----(+)------+\n       -  |              |\n          |    (g_m+g_mb)v_in\n          |              |\n          +-------+------+\n                  |\n                  o v_in (Source)\n```\n\n#### A. Small-Signal Voltage Gain ($A_v$)\n1. **Ideal Case (Neglecting $r_O$ and Body Effect):**\n   $$i_d = -g_m v_{gs} = g_m v_{\\text{in}}$$\n   $$v_{\\text{out}} = i_d R_D = g_m R_D v_{\\text{in}}$$\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = +g_m R_D$$\n   *(Note: The gain is **non-inverting / positive**).*\n\n2. **Including Body Effect ($g_{mb}$):**\n   $$A_v = +(g_m + g_{mb})R_D$$\n\n3. **Including Channel-Length Modulation ($r_O$) and Body Effect ($g_{mb}$):**\n   Applying KCL at the output node:\n   $$\\frac{v_{\\text{out}}}{R_D} - (g_m + g_{mb})v_{\\text{in}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_O} = 0$$\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{1 + (g_m + g_{mb})r_O}{r_O + R_D}R_D \\approx \\frac{(g_m + g_{mb})R_D}{1 + \\frac{R_D}{r_O}}$$\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the source terminal:\n* **Neglecting $r_O$:**\n  $$R_{\\text{in}} = \\frac{1}{g_m + g_{mb}} \\approx \\frac{1}{g_m}$$\n* **Including $r_O$ and $R_D$:**\n  $$R_{\\text{in}} = \\frac{r_O + R_D}{1 + (g_m + g_{mb})r_O}$$\n\n*(The CG stage has a inherently **low input impedance**).*\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nLooking into the drain terminal with $v_{\\text{in}} = 0$ (source at AC ground):\n$$R_{\\text{out}} = R_D \\parallel r_O \\approx R_D \\quad (\\text{for } r_O \\gg R_D)$$\n\n---\n\n### 4. Summary of Characteristics\n\n| Parameter | Value (Approximate) |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | $+g_m R_D$ (Non-inverting) |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\approx \\frac{1}{g_m}$ (Low) |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\approx R_D$ (Moderate to High) |\n| **Phase Shift** | $0^\\circ$ (In-phase) |\n\n### 5. Practical Applications\n* **High-Frequency Amplifiers:** The common-gate stage avoids the Miller multiplication of the gate-drain capacitance ($C_{gd}$) because the gate is at AC ground, offering a very wide bandwidth.\n* **Current Buffers:** Due to low $R_{\\text{in}}$ and high $R_{\\text{out}}$, it efficiently transfers current from a low-impedance node to a high-impedance node.\n* **Impedance Matching:** Often used in RF front-ends (e.g., matching low source impedances like $50\\,\\Omega$ by setting $1/g_m = 50\\,\\Omega$).",
        "format": "markdown",
        "sha256": "01e4fb512eada8a6b4fda38f3e44760a4bba7417ea0e01d221cf658ec1653a96"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology with source input and AC-grounded gate, and gives the correct positive gain and low input resistance, including reasonable output-resistance and body-effect refinements.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 6337,
        "total_tokens": 7418,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4519,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 6337,
        "total_tokens": 7418,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4519,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Identification & Topology\n* **Configuration:** **Common-Gate (CG) Amplifier** using an NMOS transistor ($M_1$) with a resistive load ($R_D$).\n* **Input Terminal:** Applied to the **Source** ($V_{\\text{in}}$).\n* **Output Terminal:** Taken at the **Drain** ($V_{\\text{out}}$).\n* **Gate Terminal:** Tied directly to the DC supply voltage ($V_{DD}$), which acts as an **AC ground** in small-signal analysis.\n\n---\n\n### 2. Large-Signal (DC / Transfer) Characteristics\n\nAs the input voltage $V_{\\text{in}}$ varies from $0$ to $V_{DD}$, the transistor moves through different regions of operation:\n\n1. **Cutoff Region ($V_{\\text{in}} \\ge V_{DD} - V_{TH}$):**\n   * The gate-to-source voltage is $V_{GS} = V_{DD} - V_{\\text{in}}$.\n   * If $V_{\\text{in}} \\ge V_{DD} - V_{TH}$, then $V_{GS} \\le V_{TH}$, so the transistor is **OFF** ($I_D = 0$).\n   * Therefore:\n     $$V_{\\text{out}} = V_{DD}$$\n\n2. **Saturation Region ($V_{\\text{in}} < V_{DD} - V_{TH}$ and $V_{\\text{out}} \\ge V_{DD} - V_{TH}$):**\n   * As $V_{\\text{in}}$ decreases below $V_{DD} - V_{TH}$, the transistor turns **ON**.\n   * The drain current in saturation is given by (neglecting channel-length modulation):\n     $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n   * The output voltage is:\n     $$V_{\\text{out}} = V_{DD} - I_D R_D = V_{DD} - \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_{DD} - V_{\\text{in}} - V_{TH})^2 R_D$$\n\n3. **Triode (Linear) Region:**\n   * If $V_{\\text{in}}$ drops further, $I_D$ increases, causing $V_{\\text{out}}$ to drop significantly.\n   * When $V_{\\text{out}} < V_{DD} - V_{TH}$ (i.e., $V_{DS} < V_{GS} - V_{TH}$), $M_1$ enters the **triode region**:\n     $$I_D = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) \\left[ (V_{DD} - V_{\\text{in}} - V_{TH})(V_{\\text{out}} - V_{\\text{in}}) - \\frac{1}{2}(V_{\\text{out}} - V_{\\text{in}})^2 \\right]$$\n   * As $V_{\\text{in}} \\to 0$, $V_{\\text{out}}$ reaches its minimum value close to zero.\n\n---\n\n### 3. Small-Signal Analysis\n\nAssuming the transistor is biased in the **saturation region**:\n\n#### A. Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)\n\n* **Ideal Case** (neglecting body effect $\\gamma = 0$ and channel-length modulation $\\lambda = 0$):\n  $$A_v = g_m R_D$$\n  *(Note: The gain is **positive/non-inverting**, meaning $V_{\\text{out}}$ increases when $V_{\\text{in}}$ increases).*\n\n* **Including Body Effect ($g_{mb}$):**\n  Since the source is the input and typically the substrate/bulk is grounded ($V_B = 0$), $v_{bs} = -v_{\\text{in}}$:\n  $$A_v = (g_m + g_{mb}) R_D = g_m (1 + \\eta) R_D$$\n  *(where $\\eta = \\frac{g_{mb}}{g_m} = \\frac{\\gamma}{2\\sqrt{2\\phi_F + V_{SB}}}$)*\n\n* **Including Channel-Length Modulation ($r_O$):**\n  $$A_v = \\frac{(g_m + g_{mb}) r_O + 1}{r_O + R_D} R_D \\approx (g_m + g_{mb})(R_D \\parallel r_O)$$\n\n---\n\n#### B. Input Resistance ($R_{\\text{in}}$)\n\nLooking into the source terminal:\n* **Neglecting $r_O$:**\n  $$R_{\\text{in}} = \\frac{1}{g_m + g_{mb}}$$\n* **Including $r_O$ and $R_D$:**\n  $$R_{\\text{in}} = \\frac{R_D + r_O}{1 + (g_m + g_{mb})r_O} \\approx \\frac{1}{g_m + g_{mb}} + \\frac{R_D}{(g_m + g_{mb})r_O}$$\n  *(The common-gate topology exhibits a **very low input impedance**).*\n\n---\n\n#### C. Output Resistance ($R_{\\text{out}}$)\n\nLooking into the drain terminal:\n* With an ideal voltage source at the input ($R_S = 0$):\n  $$R_{\\text{out}} = R_D \\parallel r_O \\approx R_D$$\n* With a finite source resistance $R_S$:\n  $$R_{\\text{out}} = R_D \\parallel \\left[ r_O + (1 + (g_m + g_{mb})r_O)R_S \\right]$$\n\n---\n\n### 4. Summary of Key Performance Features\n\n| Parameter | Value / Characteristic | Note |\n| :--- | :--- | :--- |\n| **Gain Type** | Non-inverting ($A_v > 0$) | Output and input are in phase |\n| **Voltage Gain** | $A_v \\approx (g_m + g_{mb}) R_D$ | Moderate gain |\n| **Input Impedance** | Low ($\\approx \\frac{1}{g_m}$) | Useful for $50\\,\\Omega$ impedance matching (RF) |\n| **Output Impedance** | High ($\\approx R_D$) | Standard for resistive loads |\n| **High-Frequency Performance** | **Excellent** | No Miller effect on $C_{GD}$, resulting in very high bandwidth. |",
        "format": "markdown",
        "sha256": "657bf32efba92157ce5decfda333b81fd12e896c5da2fdb997cd04e468fa7379"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input common-gate topology and gives the right non-inverting gain and low input resistance, including reasonable body-effect and output-resistance refinements. The extra large-signal and bandwidth discussion does not change the essential answer.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 3735,
        "total_tokens": 4816,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 3735,
        "total_tokens": 4816,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Topology\n* **Intended Configuration:** The circuit resembles a **Common-Gate (CG)** amplifier stage. \n  * The gate of $M_1$ is tied to a constant DC bias voltage $V_b$ (AC ground).\n  * The drain is connected to the supply rail $V_{DD}$ through a load resistor $R_D$, where the output $V_{\\text{out}}$ is sensed.\n  * The AC input signal $V_{\\text{in}}$ is coupled to the source via capacitor $C_1$.\n\n---\n\n### 2. DC Operating Point (Biasing)\nAssuming $M_1$ operates in the **saturation (active) region**:\n* **Source Voltage:** $V_S = 0\\text{ V}$ (grounded)\n* **Gate Voltage:** $V_G = V_b$\n* **Gate-to-Source Voltage:** \n  $$V_{GS} = V_b - 0 = V_b$$\n* **Drain Current ($I_D$):**\n  $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_b - V_{TH})^2$$\n  *(neglecting channel-length modulation $\\lambda$)*\n* **DC Output Voltage:**\n  $$V_{\\text{out}} = V_{DD} - I_D R_D$$\n* **Condition for Saturation:**\n  $$V_{DS} \\ge V_{GS} - V_{TH} \\implies V_{DD} - I_D R_D \\ge V_b - V_{TH}$$\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\n#### **Critical Observation:**\nThe source terminal of transistor $M_1$ is **tied directly to ground**. \n\n1. **Source Potential:** Because the source node is hard-wired to ground, its AC potential is fixed:\n   $$v_s = 0\\text{ V}$$\n2. **Gate Potential:** The gate is held at a constant DC potential $V_b$, making it an AC ground:\n   $$v_g = 0\\text{ V}$$\n3. **Small-Signal $v_{gs}$:**\n   $$v_{gs} = v_g - v_s = 0 - 0 = 0\\text{ V}$$\n4. **Small-Signal Drain Current ($i_d$):**\n   $$i_d = g_m v_{gs} + g_{mb} v_{bs} = 0$$\n5. **Output Voltage ($v_{\\text{out}}$):**\n   $$v_{\\text{out}} = -i_d (R_D \\parallel r_O) = 0\\text{ V}$$\n\n---\n\n### 4. Key Performance Parameters\n\n* **Voltage Gain ($A_v$):**\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0$$\n\n* **Input Impedance ($Z_{\\text{in}}$):**\n  The input source $V_{\\text{in}}$ is connected directly through $C_1$ to ground:\n  $$Z_{\\text{in}}(s) = \\frac{1}{s C_1}$$\n  All AC current from the input source shunts directly to ground and does not modulate the transistor.\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  $$R_{\\text{out}} = R_D \\parallel r_O \\approx R_D$$\n\n---\n\n### 5. Summary / Circuit Critique\nDue to the direct connection of the source to ground:\n* The input voltage $V_{\\text{in}}$ cannot modulate the source potential.\n* As a result, the circuit **does not function as an amplifier** and yields a **voltage gain of zero**.\n* **Correction:** To make this a functional common-gate amplifier, the direct connection from the source to ground must be replaced with a biasing current source $I_{SS}$, a source resistor $R_S$, or an RF choke/inductor.",
        "format": "markdown",
        "sha256": "a3c7d8cc2f008725584727ff7d1ed4da1aef2ae50068f1449a10a82ca7162a86"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source is hard-shorted to ground, so the input cannot modulate it and the ideal voltage gain is zero. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 3056,
        "total_tokens": 4144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 3056,
        "total_tokens": 4144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a step-by-step analysis of the circuit:\n\n---\n\n### 1. Circuit Identification\nThis circuit is intended to operate as a **Common-Gate (CG) Amplifier**:\n* **Input ($V_{\\text{in}}$):** Applied to the source of transistor $M_1$ via coupling capacitor $C_1$.\n* **Gate:** Biased at a constant DC potential $V_b$ (AC ground).\n* **Output ($V_{\\text{out}}$):** Taken from the drain node with a resistive load $R_D$ tied to $V_{DD}$.\n\n---\n\n### 2. DC (Biasing) Analysis\n* **Source Voltage:** The source is tied directly to ground, so:\n  $$V_S = 0\\text{ V}$$\n* **Gate Voltage:** \n  $$V_G = V_b$$\n* **Gate-to-Source Voltage:** \n  $$V_{GS} = V_b - 0 = V_b$$\n* Assuming $V_b > V_{TH}$ and the transistor is biased in the saturation region ($V_{\\text{out}} \\ge V_b - V_{TH}$), the DC drain current is:\n  $$I_D = \\frac{1}{2}\\mu_n C_{\\text{ox}}\\frac{W}{L}(V_b - V_{TH})^2$$\n* The DC output voltage at the drain is:\n  $$V_{\\text{out, DC}} = V_{DD} - I_D R_D$$\n\n---\n\n### 3. Small-Signal (AC) Analysis & Voltage Gain\n\n1. **Source Node Voltage ($v_s$):**\n   Because the source terminal is connected directly to signal ground:\n   $$v_s = 0$$\n\n2. **Gate Node Voltage ($v_g$):**\n   Since $V_b$ is an ideal DC voltage source:\n   $$v_g = 0$$\n\n3. **Gate-to-Source Small-Signal Voltage ($v_{gs}$):**\n   $$v_{gs} = v_g - v_s = 0 - 0 = 0$$\n\n4. **Small-Signal Drain Current ($i_d$):**\n   $$i_d = g_m v_{gs} = 0$$\n\n5. **Small-Signal Output Voltage ($v_{\\text{out}}$):**\n   $$v_{\\text{out}} = -i_d (R_D \\parallel r_o) = 0$$\n\n6. **Voltage Gain ($A_v$):**\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0$$\n\n---\n\n### 4. Input Impedance\nLooking into the input source $V_{\\text{in}}$, the signal sees only the coupling capacitor $C_1$ connected directly to ground:\n$$Z_{\\text{in}}(s) = \\frac{1}{sC_1}$$\nThe entire AC input voltage drops across $C_1$, effectively shorting the input signal to ground.\n\n---\n\n### 5. Summary & Circuit Flaw\n* **Design Issue:** By connecting the source directly to ground, the source potential is fixed at $0\\text{ V}$ for both DC and AC. As a result, the input AC signal cannot modulate the source voltage or the channel current.\n* **Correction:** To make this a functional common-gate amplifier, the direct connection to ground at the source should be replaced with a **bias current source** or a **source resistor ($R_S$)**. This creates a non-zero AC impedance at the source node ($\\approx \\frac{1}{g_m} \\parallel R_S$), allowing the input signal to modulate $V_{GS}$ and yield a typical CG voltage gain of:\n  $$A_v \\approx g_m R_D$$",
        "format": "markdown",
        "sha256": "57ab94862828af72474558ff41b62680b0fe8cdec932d4074488d99b8abe93e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input cannot create a source signal and the ideal voltage gain is zero. The extra biasing and repair discussion does not undermine the essential answer.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 2582,
        "total_tokens": 3670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 2582,
        "total_tokens": 3670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Topology & Identification\n* **Configuration:** Intended to be a **Common-Gate (CG)** amplifier.\n* **Gate:** Connected to a constant DC bias voltage $V_b$ (acts as an AC ground).\n* **Drain:** Connected to the supply voltage $V_{DD}$ through the drain resistor $R_D$, with the output $V_{\\text{out}}$ taken at the drain.\n* **Source:** Coupled to the input signal $V_{\\text{in}}$ via capacitor $C_1$, but **directly tied to ground**.\n\n---\n\n### 2. DC Operating Point Analysis\n* **Source Voltage:** Fixed at ground, $V_S = 0\\text{ V}$.\n* **Gate Voltage:** $V_G = V_b$.\n* **Gate-to-Source Voltage:** \n  $$V_{GS} = V_G - V_S = V_b$$\n* **Condition for Conduction:** For transistor $M_1$ to be turned on, the bias must satisfy:\n  $$V_b > V_{TH1}$$\n* Assuming $M_1$ operates in the **saturation region**:\n  $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_b - V_{TH1})^2$$\n* **Drain Voltage:**\n  $$V_D = V_{DD} - I_D R_D$$\n* For saturation mode, the condition $V_{DS} \\geq V_{GS} - V_{TH1}$ must hold:\n  $$V_{DD} - I_D R_D \\geq V_b - V_{TH1}$$\n\n---\n\n### 3. Small-Signal (AC) Analysis & Critical Flaw\n\n#### **The Issue with Direct Grounding:**\n* In a functional Common-Gate amplifier, the input signal $v_{\\text{in}}$ must modulate the source potential $v_s$ to create a variation in $v_{gs} = v_g - v_s = -v_s$, which in turn modulates the drain current.\n* In this circuit, the source is **hardwired directly to ground**. Therefore, for small-signal (AC) analysis:\n  $$v_s = 0$$\n* Since the gate is connected to a fixed DC supply $V_b$, it is also at AC ground:\n  $$v_g = 0$$\n\n#### **Small-Signal Output and Voltage Gain:**\n* The small-signal gate-to-source voltage is:\n  $$v_{gs} = v_g - v_s = 0 - 0 = 0$$\n* The small-signal drain current is:\n  $$i_d = g_m v_{gs} = 0$$\n* Since no signal current flows through the load:\n  $$v_{\\text{out}} = -i_d (R_D \\parallel r_O) = 0$$\n* **Voltage Gain:**\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0$$\n\n#### **Input Loading:**\n* The input voltage source $V_{\\text{in}}$ sees only the impedance of the coupling capacitor to ground:\n  $$Z_{\\text{in}}(s) = \\frac{1}{s C_1}$$\n* The input signal is simply shunted to ground through $C_1$ without influencing the transistor.\n\n---\n\n### 4. Summary & Proper Implementation\n\n| Parameter | Value in Current Circuit |\n| :--- | :--- |\n| **DC Bias Current ($I_D$)** | $\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)(V_b - V_{TH1})^2$ |\n| **Small-Signal Gain ($A_v$)** | **$0$** |\n| **Output Resistance ($R_{\\text{out}}$)** | $R_D \\parallel r_O$ |\n\n#### **How to Fix the Circuit:**\nTo allow the circuit to function as an amplifier:\n1. **Add a Source Resistor ($R_S$) or Current Source ($I_{SS}$):** Place a resistor $R_S$ or a current source between the source of $M_1$ and ground instead of a direct short.\n2. **Gain with Correction:** With a finite source impedance $R_S$, the input signal $V_{\\text{in}}$ can develop an AC voltage at the source node, yielding the standard non-inverting common-gate gain:\n   $$A_v \\approx g_m R_D$$",
        "format": "markdown",
        "sha256": "91fd34b09252daf918a017a50eb871934697b8a14c83152cdcfbb7be68b08c93"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly notices that the source is hard-shorted to ground, so the input cannot modulate the transistor and the ideal small-signal voltage gain is zero. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 2871,
        "total_tokens": 3959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1836,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 2871,
        "total_tokens": 3959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1836,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the small-signal analysis of the common-source amplifier, we can determine the number of poles as follows:\n\n1. **Identify the capacitor connections:**\n   * **$C_{\\text{SB}}$:** Connected between the source and ground (bulk). Since the source of $M_1$ is already tied directly to ground, both terminals of $C_{\\text{SB}}$ are at ground potential. Thus, **$C_{\\text{SB}}$ is shorted out** and does not contribute to the frequency response.\n   * **$C_{\\text{GS}}$:** Connected between the gate and ground (source).\n   * **$C_{\\text{GD}}$:** Connected between the gate and drain.\n   * **$C_{\\text{DB}}$:** Connected between the drain and ground.\n\n2. **Count independent nodes (state variables):**\n   * There are **2 independent active nodes** connected to the remaining capacitors ($C_{\\text{GS}}$, $C_{\\text{GD}}$, and $C_{\\text{DB}}$):\n     1. **The Gate node**\n     2. **The Drain node ($V_{\\text{out}}$)**\n\nSince there is no loop formed exclusively by capacitors connected across ideal voltage sources, the system has **2 independent state variables** (the voltages at the gate and drain nodes). This results in a second-order polynomial in the denominator of the transfer function $V_{\\text{out}}(s)/V_{\\text{in}}(s)$.\n\nTherefore, the circuit has **2 poles** (and 1 right-half-plane zero caused by $C_{\\text{GD}}$).",
        "format": "markdown",
        "sha256": "dff8dc0f09ac777645339cfcd37de97541aca5ba9c7befd7b82e750551957aab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that CSB is shorted because both terminals are grounded, and that the remaining capacitors give two independent state variables, hence two poles. The additional zero comment does not affect the correct answer.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1364,
        "total_tokens": 2456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1023,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1364,
        "total_tokens": 2456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1023,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown has **2 poles**.\n\n---\n\n### **Step-by-Step Explanation:**\n\n1. **Source Node & $C_{SB}$:**\n   * The source of transistor $M_1$ is tied directly to ground ($V_S = 0$).\n   * As a result, both terminals of $C_{SB}$ are connected to ground, effectively **short-circuiting $C_{SB}$**. Therefore, $C_{SB}$ carries no dynamic signal and does not contribute any poles.\n\n2. **Independent Nodes:**\n   * In the small-signal equivalent circuit, there are only **two non-ground nodes**:\n     1. **Gate node:** Connected to $R_S$, $C_{GS}$, and $C_{GD}$.\n     2. **Drain node (Output):** Connected to $R_D$, $C_{DB}$, $C_{GD}$, and the dependent current source $g_m V_{gs}$.\n\n3. **Order of the Transfer Function:**\n   * Applying Kirchhoff's Current Law (KCL) at the gate and drain nodes yields two coupled first-order differential equations in the frequency domain.\n   * Solving for the transfer function $\\frac{V_{\\text{out}}(s)}{V_{\\text{in}}(s)}$ results in a quadratic denominator:\n     $$D(s) = 1 + a_1 s + a_2 s^2$$\n   * A second-order denominator corresponds to **2 poles**.\n\n---\n\n### **Summary:**\n* **Number of poles:** **2**\n* *(Note: The circuit also has **1 zero** in the right-half plane introduced by $C_{GD}$.)*",
        "format": "markdown",
        "sha256": "0abb24a3215abb67628971b55f8e4a600e5ac08ffc52e8731b908100c28cb9a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count by noting that CSB is shorted out with both terminals grounded; it also describes a second-order transfer-function denominator.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1482,
        "total_tokens": 2574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1123,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1482,
        "total_tokens": 2574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1123,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we analyze the small-signal equivalent circuit and count the number of independent state variables (capacitive nodes):\n\n1. **Source Node:** \n   * The source terminal of transistor $M_1$ is connected directly to ground. \n   * The source-to-bulk capacitor $C_{\\text{SB}}$ has both of its terminals connected to ground, meaning it is shorted out and does not contribute any dynamic behavior (no pole).\n\n2. **Remaining Nodes:**\n   * **Gate Node ($V_G$):** Connected to $R_S$, $C_{\\text{GS}}$ (to ground), and $C_{\\text{GD}}$ (to the drain).\n   * **Drain Node ($V_{\\text{out}}$):** Connected to $R_D$ (to AC ground), $C_{\\text{DB}}$ (to ground), and $C_{\\text{GD}}$ (to the gate).\n\n3. **Transfer Function Order:**\n   * Applying Kirchhoff's Current Law (KCL) at the two independent nodes (gate and drain) yields a system of two coupled first-order differential equations:\n     $$\\Delta(s) = s^2 \\left(C_{\\text{GS}}C_{\\text{GD}} + C_{\\text{GS}}C_{\\text{DB}} + C_{\\text{GD}}C_{\\text{DB}}\\right) + s \\left[ \\frac{C_{\\text{GD}} + C_{\\text{DB}}}{R_S} + \\frac{C_{\\text{GS}} + C_{\\text{GD}}}{R_D} + g_m C_{\\text{GD}} \\right] + \\frac{1}{R_S R_D}$$\n   * The characteristic equation (denominator of the transfer function $\\frac{V_{\\text{out}}(s)}{V_{\\text{in}}(s)}$) is quadratic in $s$ ($s^2$).\n\nTherefore, the circuit has **2 poles** (and 1 right-half-plane zero created by $C_{\\text{GD}}$).",
        "format": "markdown",
        "sha256": "07842988f516bc8624317f091de5eb199eb7950690c04d4a0981121d697f388e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that C_SB is shorted out, and the remaining capacitors yield a quadratic characteristic denominator, so the circuit has two poles. The stated C_GD zero is also consistent.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1779,
        "total_tokens": 2871,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1332,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1779,
        "total_tokens": 2871,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1332,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the given circuit, covering its topology, DC biasing, small-signal voltage gain, and input/output impedances.\n\n---\n\n### 1. Circuit Description & Topology\n* **Transistor ($M_1$):** N-channel MOSFET.\n* **Input ($V_{\\text{in}}$):** Applied directly to the **source** terminal.\n* **Output ($V_{\\text{out}}$):** Taken from the **drain** terminal.\n* **Load ($R_D$):** Pull-up drain resistor connected to supply $V_{DD}$.\n* **Feedback Network ($R_1, R_2$):** A voltage divider that samples the output voltage $V_{\\text{out}}$ and returns a feedback voltage $V_F$ to the **gate** of $M_1$.\n\n**Amplifier Classification:** \nThis is a **Common-Gate (CG) amplifier with negative feedback** (voltage-voltage / series-shunt configuration). \n\n---\n\n### 2. DC / Bias Analysis\nThe feedback divider sets the DC gate voltage $V_F$:\n$$V_F = V_{\\text{out}} \\cdot \\frac{R_2}{R_1 + R_2}$$\n\n* **Saturation Condition:** For $M_1$ to operate in the saturation region:\n  $$V_{DS} \\ge V_{GS} - V_{TH} \\implies V_{\\text{out}} - V_{\\text{in}} \\ge (V_F - V_{\\text{in}}) - V_{TH} \\implies V_{\\text{out}} \\ge V_F - V_{TH}$$\n  Since $V_F = \\frac{R_2}{R_1 + R_2}V_{\\text{out}} < V_{\\text{out}}$, the condition $V_{\\text{out}} > V_F$ naturally holds for positive threshold voltage $V_{TH} > 0$. Thus, $M_1$ readily remains in saturation when turned on.\n\n* **DC Drain Current ($I_D$):**\n  $$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_F - V_{\\text{in,DC}} - V_{TH})^2$$\n\n---\n\n### 3. Small-Signal Voltage Gain ($A_v$)\n\nLet:\n* $g_m$ be the transconductance of $M_1$.\n* $\\beta = \\frac{R_2}{R_1 + R_2}$ be the feedback factor.\n* $R_L = R_D \\parallel (R_1 + R_2)$ be the total effective resistance at the drain node.\n* Assume channel-length modulation is negligible ($r_o \\to \\infty$) and body effect is neglected ($g_{mb} = 0$).\n\n#### Derivation:\n1. **Gate and Source voltages:**\n   $$v_g = v_F = \\beta v_{\\text{out}}$$\n   $$v_s = v_{\\text{in}}$$\n   $$v_{gs} = v_g - v_s = \\beta v_{\\text{out}} - v_{\\text{in}}$$\n\n2. **Drain current:**\n   $$i_d = g_m v_{gs} = g_m (\\beta v_{\\text{out}} - v_{\\text{in}})$$\n\n3. **KCL at the output node ($V_{\\text{out}}$):**\n   $$\\frac{v_{\\text{out}}}{R_D} + \\frac{v_{\\text{out}}}{R_1 + R_2} + i_d = 0$$\n   $$\\frac{v_{\\text{out}}}{R_L} + g_m (\\beta v_{\\text{out}} - v_{\\text{in}}) = 0$$\n   $$v_{\\text{out}} \\left( \\frac{1}{R_L} + g_m \\beta \\right) = g_m v_{\\text{in}}$$\n\n4. **Closed-Loop Voltage Gain:**\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_L}{1 + g_m \\beta R_L}$$\n\nSubstituting $\\beta$ and $R_L$:\n$$A_v = \\frac{g_m [R_D \\parallel (R_1 + R_2)]}{1 + g_m \\left(\\frac{R_2}{R_1 + R_2}\\right) [R_D \\parallel (R_1 + R_2)]}$$\n\n> **Ideal / High-Gain Approximation ($g_m \\beta R_L \\gg 1$):**\n> $$A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}$$\n> Under strong feedback, the gain is **non-inverting** and determined purely by the ratio of the feedback resistors (similar to a non-inverting op-amp configuration).\n\n---\n\n### 4. Input and Output Impedance\n\n#### Input Impedance ($R_{\\text{in}}$)\nApply a test voltage $v_x$ at the source with the output loaded:\n$$i_x = -i_d = g_m (v_x - \\beta v_{\\text{out}}) = g_m (1 - \\beta A_v) v_x$$\n\nUsing $1 - \\beta A_v = \\frac{1}{1 + g_m \\beta R_L}$:\n$$R_{\\text{in}} = \\frac{v_x}{i_x} = \\frac{1}{g_m}(1 + g_m \\beta R_L) = \\frac{1}{g_m} + \\beta R_L$$\n\n* **Effect:** Unlike a standard Common-Gate stage where $R_{\\text{in}} \\approx 1/g_m$, the series feedback **increases** the input impedance.\n\n---\n\n#### Output Impedance ($R_{\\text{out}}$)\nSet $v_{\\text{in}} = 0$ and apply a test voltage $v_x$ at the output node $V_{\\text{out}}$:\n* Gate voltage: $v_g = \\beta v_x$\n* Source voltage: $v_s = 0 \\implies v_{gs} = \\beta v_x$\n* Drain current: $i_d = g_m \\beta v_x$\n\nUsing KCL at the output node:\n$$i_x = \\frac{v_x}{R_D} + \\frac{v_x}{R_1 + R_2} + g_m \\beta v_x = v_x \\left( \\frac{1}{R_L} + g_m \\beta \\right)$$\n\n$$R_{\\text{out}} = \\frac{v_x}{i_x} = \\frac{R_L}{1 + g_m \\beta R_L} = R_D \\parallel (R_1 + R_2) \\parallel \\frac{1}{g_m \\beta}$$\n\n* **Effect:** The shunt feedback **decreases** the output impedance by a factor of $(1 + g_m \\beta R_L)$.\n\n---\n\n### 5. Summary of Circuit Properties\n\n| Parameter | Without Feedback (Standard CG) | With Feedback (This Circuit) |\n| :--- | :--- | :--- |\n| **Gain ($A_v$)** | $g_m R_D$ | $\\approx 1 + \\frac{R_1}{R_2}$ (for $g_m \\beta R_L \\gg 1$) |\n| **Gain Polarity** | Non-inverting ($+$) | Non-inverting ($+$) |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\frac{1}{g_m}$ (Low) | $\\frac{1}{g_m} + \\beta R_L$ (Increased) |\n| **Output Resistance ($R_{\\text{out}}$)** | $R_D$ | $R_L \\parallel \\frac{1}{g_m \\beta}$ (Decreased) |",
        "format": "markdown",
        "sha256": "ea36bc6d0a327c7032a06fd76bc44da1870976de298cb2de15bce4480fc6d8d9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain. The extra impedance and bias discussion does not undermine the essential answer.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5325,
        "total_tokens": 6413,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3525,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5325,
        "total_tokens": 6413,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3525,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the given circuit.\n\n---\n\n### 1. Circuit Topology and Classification\n\n* **Amplifier Configuration:** **Common-Gate (CG)** amplifier with **drain-to-gate resistive feedback**.\n* **Input / Output:**\n  * Input voltage ($V_{\\text{in}}$) is applied to the **source** of NMOS transistor $M_1$.\n  * Output voltage ($V_{\\text{out}}$) is taken from the **drain** of $M_1$.\n* **Feedback Network:** \n  * A resistive voltage divider formed by $R_1$ and $R_2$ samples the output voltage at the drain and returns a feedback voltage $V_F$ to the gate.\n* **Feedback Type:** **Voltage–Voltage (Series–Shunt) Negative Feedback**:\n  * **Shunt sampling** at the output (samples voltage $V_{\\text{out}}$).\n  * **Series mixing** at the input (gate-to-source voltage $V_{gs} = V_F - V_{\\text{in}}$).\n\n---\n\n### 2. Feedback Parameters\n\n1. **Feedback Factor ($\\beta$):**\n   The voltage divider sets the gate feedback voltage:\n   $$\\beta = \\frac{V_F}{V_{\\text{out}}} = \\frac{R_2}{R_1 + R_2}$$\n\n2. **Effective Load Resistance ($R_L'$):**\n   The total small-signal load seen at the drain node consists of $R_D$ in parallel with the series combination $(R_1 + R_2)$:\n   $$R_L' = R_D \\parallel (R_1 + R_2)$$\n\n3. **Loop Gain ($T$):**\n   Assuming channel-length modulation is negligible ($r_o \\to \\infty$):\n   $$T = g_m \\beta R_L' = g_m \\left(\\frac{R_2}{R_1 + R_2}\\right) \\left[ R_D \\parallel (R_1 + R_2) \\right]$$\n   *(where $g_m$ is the transconductance of $M_1$)*.\n\n---\n\n### 3. Small-Signal Voltage Gain ($A_v$)\n\nUsing the small-signal model ($r_o \\to \\infty$):\n* Gate voltage: $v_g = \\beta v_{\\text{out}}$\n* Source voltage: $v_s = v_{\\text{in}}$\n* Gate-to-source voltage: $v_{gs} = \\beta v_{\\text{out}} - v_{\\text{in}}$\n* Small-signal drain current: $i_d = g_m v_{gs} = g_m (\\beta v_{\\text{out}} - v_{\\text{in}})$\n\nApplying **KCL at the output node ($V_{\\text{out}}$)**:\n$$\\frac{v_{\\text{out}}}{R_L'} + i_d = 0$$\n\n$$\\frac{v_{\\text{out}}}{R_L'} + g_m (\\beta v_{\\text{out}} - v_{\\text{in}}) = 0$$\n\nRearranging for $v_{\\text{out}} / v_{\\text{in}}$:\n$$v_{\\text{out}} \\left( \\frac{1}{R_L'} + g_m \\beta \\right) = g_m v_{\\text{in}}$$\n\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_L'}{1 + g_m \\beta R_L'} = \\frac{A_{OL}}{1 + T}$$\n\nSubstituting $\\beta$ and $R_L'$:\n$$A_v = \\frac{g_m [R_D \\parallel (R_1 + R_2)]}{1 + g_m \\left(\\frac{R_2}{R_1 + R_2}\\right) [R_D \\parallel (R_1 + R_2)]}$$\n\n> **High Loop-Gain Limit ($T \\gg 1$):**\n> $$A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}$$\n> In this limit, the gain becomes independent of transistor parameters ($g_m$) and is set purely by the resistor ratio, acting analogously to a non-inverting operational amplifier.\n\n---\n\n### 4. Input Impedance ($R_{\\text{in}}$)\n\nTo find the input impedance looking into the source terminal:\n* Apply a test voltage $v_x$ at $V_{\\text{in}}$ and find the current $i_x$ entering the source:\n  $$i_x = -i_d = g_m (v_{\\text{in}} - v_g) = g_m (v_x - \\beta v_{\\text{out}}) = g_m v_x (1 - \\beta A_v)$$\n\n* Since $1 - \\beta A_v = \\frac{1}{1 + T}$:\n  $$i_x = \\frac{g_m v_x}{1 + T}$$\n\n$$R_{\\text{in}} = \\frac{v_x}{i_x} = \\frac{1 + T}{g_m} = \\frac{1}{g_m} + \\beta R_L'$$\n\n> **Effect of Feedback:** Series feedback at the input **increases** the input impedance by a factor of $(1 + T)$ compared to the standard common-gate input impedance ($1/g_m$).\n\n---\n\n### 5. Output Impedance ($R_{\\text{out}}$)\n\nTo find the output impedance at node $V_{\\text{out}}$:\n* Ground the input ($v_{\\text{in}} = 0$) and apply a test source $v_x$ at $V_{\\text{out}}$:\n  * $v_{gs} = v_g - 0 = \\beta v_x$\n  * $i_d = g_m \\beta v_x$\n  * $i_x = \\frac{v_x}{R_L'} + i_d = v_x \\left( \\frac{1}{R_L'} + g_m \\beta \\right)$\n\n$$R_{\\text{out}} = \\frac{v_x}{i_x} = \\frac{R_L'}{1 + g_m \\beta R_L'} = \\frac{R_L'}{1 + T}$$\n\n> **Effect of Feedback:** Shunt feedback at the output **decreases** the output impedance by a factor of $(1 + T)$, making the circuit a better voltage source.\n\n---\n\n### 6. Summary of Key Characteristics\n\n| Parameter | Without Feedback ($\\beta = 0$) | With Feedback |\n| :--- | :---: | :---: |\n| **Voltage Gain ($A_v$)** | $g_m R_L'$ | $\\dfrac{g_m R_L'}{1 + g_m \\beta R_L'} \\xrightarrow{T \\gg 1} 1 + \\dfrac{R_1}{R_2}$ |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\dfrac{1}{g_m}$ | $\\dfrac{1}{g_m} (1 + T) = \\dfrac{1}{g_m} + \\beta R_L'$ |\n| **Output Impedance ($R_{\\text{out}}$)** | $R_L'$ | $\\dfrac{R_L'}{1 + T}$ |\n| **DC Biasing** | Requires external $V_G$ | **Self-biasing:** $V_G$ is derived directly from $V_D$ |",
        "format": "markdown",
        "sha256": "d04f0628f84a42e1d7bc324e36332d3ae766094b80ef63a290a579ded2c42ce0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain. The additional impedance discussion does not detract from the essential answer.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5306,
        "total_tokens": 6394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5306,
        "total_tokens": 6394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit, including its topology, feedback mechanism, small-signal voltage gain, and input/output impedances.\n\n---\n\n### 1. Circuit Overview and Classification\n\n* **Amplifier Core:** Transistor $M_1$ operates as a **Common-Gate (CG)**-like amplifier core because the input signal $V_{\\text{in}}$ is applied to the **source** terminal, and the output signal $V_{\\text{out}}$ is taken from the **drain** terminal.\n* **Feedback Network:** Resistors $R_1$ and $R_2$ form a resistive voltage divider that senses the output voltage $V_{\\text{out}}$ and feeds back a voltage $V_F$ to the **gate** of $M_1$.\n\n---\n\n### 2. Feedback Analysis\n\n#### A. Feedback Polarity (Negative Feedback Verification)\n1. Assume $V_{\\text{in}}$ increases ($\\uparrow$).\n2. The gate-to-source voltage decreases ($V_{GS} = V_G - V_S \\downarrow$).\n3. The drain current decreases ($I_D \\downarrow$).\n4. The output voltage rises ($V_{\\text{out}} = V_{DD} - I_D R_D \\uparrow$).\n5. The feedback voltage rises ($V_F = V_{\\text{out}} \\frac{R_2}{R_1 + R_2} \\uparrow$).\n6. An increase in $V_F$ (and thus $V_G$) increases $V_{GS}$, which opposes the initial decrease in $V_{GS}$ caused by $V_{\\text{in}}\\uparrow$.\n\nSince the feedback mechanism opposes the change, this is **negative feedback**.\n\n#### B. Feedback Type / Topology\n* **Output Sensing:** The feedback network is connected in **parallel (shunt)** with the output to sample the output **voltage** $V_{\\text{out}}$.\n* **Input Mixing:** The input signal is at the source ($V_S = V_{\\text{in}}$) and the feedback signal is at the gate ($V_G = V_F$). The transistor inherently subtracts these voltages via:\n  $$V_{GS} = V_G - V_S = V_F - V_{\\text{in}}$$\n  This constitutes **series (voltage)** mixing at the input.\n* **Feedback Topology:** **Voltage-Voltage (Series-Shunt)** feedback.\n\n#### C. Feedback Factor ($\\beta$)\n$$\\beta = \\frac{V_F}{V_{\\text{out}}} = \\frac{R_2}{R_1 + R_2}$$\n\n---\n\n### 3. Small-Signal Voltage Gain ($\\frac{v_{\\text{out}}}{v_{\\text{in}}}$)\n\nAssuming the transistor is in saturation, neglecting channel-length modulation ($\\lambda = 0 \\implies r_O = \\infty$) and body effect ($\\gamma = 0$):\n\n1. **Small-Signal Drain Current:**\n   $$i_d = g_m v_{gs} = g_m (v_g - v_s) = g_m (\\beta v_{\\text{out}} - v_{\\text{in}})$$\n\n2. **KCL at the Output Node ($V_{\\text{out}}$):**\n   The total load resistance seen at the drain is $R_L' = R_D \\parallel (R_1 + R_2)$:\n   $$\\frac{v_{\\text{out}}}{R_L'} + i_d = 0$$\n   $$\\frac{v_{\\text{out}}}{R_L'} + g_m (\\beta v_{\\text{out}} - v_{\\text{in}}) = 0$$\n\n3. **Solving for $\\frac{v_{\\text{out}}}{v_{\\text{in}}}$:**\n   $$v_{\\text{out}} \\left( \\frac{1}{R_L'} + g_m \\beta \\right) = g_m v_{\\text{in}}$$\n   \n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_L'}{1 + g_m R_L' \\beta} = \\frac{A_0}{1 + \\beta A_0}$$\n\n   where:\n   * **Open-loop gain:** $A_0 = g_m R_L' = g_m [R_D \\parallel (R_1 + R_2)]$\n   * **Loop gain:** $T = \\beta A_0 = g_m R_L' \\left(\\frac{R_2}{R_1 + R_2}\\right)$\n\n4. **Ideal Closed-Loop Gain (for $T \\gg 1$):**\n   $$\\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}$$\n\n> **Note:** This is equivalent to the closed-loop gain expression of a standard non-inverting operational amplifier configuration.\n\n---\n\n### 4. Input and Output Impedance\n\n#### A. Input Impedance ($R_{\\text{in}}$)\nBecause the feedback mixes in **series** at the input, the input impedance increases by a factor of $(1 + T)$:\n\n$$i_{\\text{in}} = -i_d = g_m (v_{\\text{in}} - \\beta v_{\\text{out}})$$\n\nSubstitute $v_{\\text{out}} = \\frac{g_m R_L'}{1 + g_m R_L' \\beta} v_{\\text{in}}$:\n$$i_{\\text{in}} = g_m v_{\\text{in}} \\left(1 - \\frac{g_m R_L' \\beta}{1 + g_m R_L' \\beta}\\right) = \\frac{g_m v_{\\text{in}}}{1 + g_m R_L' \\beta}$$\n\n$$R_{\\text{in}} = \\frac{v_{\\text{in}}}{i_{\\text{in}}} = \\frac{1 + g_m R_L' \\beta}{g_m} = \\frac{1}{g_m} + \\beta R_L'$$\n\n*(Unlike a standard common-gate stage where $R_{\\text{in}} \\approx 1/g_m$, the series negative feedback significantly increases the input resistance).*\n\n---\n\n#### B. Output Impedance ($R_{\\text{out}}$)\nBecause the feedback samples in **shunt** (parallel) at the output, the output impedance decreases by a factor of $(1 + T)$:\n\nApplying a test voltage $v_x$ at the output with $v_{\\text{in}} = 0$:\n* $v_s = 0$\n* $v_g = \\beta v_x \\implies v_{gs} = \\beta v_x$\n\n$$i_x = \\frac{v_x}{R_L'} + g_m v_{gs} = v_x \\left( \\frac{1}{R_L'} + g_m \\beta \\right)$$\n\n$$R_{\\text{out}} = \\frac{v_x}{i_x} = \\frac{R_L'}{1 + g_m R_L' \\beta} = \\frac{R_D \\parallel (R_1 + R_2)}{1 + T}$$\n\n---\n\n### 5. Summary Table\n\n| Parameter | Expression |\n| :--- | :--- |\n| **Feedback Type** | Voltage-Voltage (Series-Shunt) Negative Feedback |\n| **Feedback Factor ($\\beta$)** | $\\frac{R_2}{R_1 + R_2}$ |\n| **Effective Load ($R_L'$)** | $R_D \\parallel (R_1 + R_2)$ |\n| **Open-Loop Gain ($A_0$)** | $g_m R_L'$ |\n| **Closed-Loop Gain ($A_v$)** | $\\frac{g_m R_L'}{1 + g_m R_L' \\beta} \\approx 1 + \\frac{R_1}{R_2}$ (for high loop gain) |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\frac{1}{g_m} (1 + g_m \\beta R_L') = \\frac{1}{g_m} + \\beta R_L'$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\frac{R_L'}{1 + g_m \\beta R_L'}$ |",
        "format": "markdown",
        "sha256": "a3414c4ae3683cf2964f9fe1c52a884d5ceb8e66a41903d7d09f9213d47b71a6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain. The additional impedance analysis is consistent with the stated small-signal assumptions.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 4854,
        "total_tokens": 5942,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 4854,
        "total_tokens": 5942,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Common-Drain (CD) Amplifier**, commonly known as a **Source Follower**, implemented with an **active current-source load**. \n\nHere is a comprehensive analysis of the circuit covering its DC operation, small-signal behavior, voltage swing limits, and practical characteristics.\n\n---\n\n### 1. Circuit Roles\n* **$M_1$ (Input Device / Driver):** Operates as the source follower. The input signal $V_{\\text{in}}$ is applied to its gate, and the output $V_{\\text{out}}$ is taken from its source.\n* **$M_2$ (Active Load / Current Source):** Biased by a fixed DC voltage $V_b$ at its gate, providing a stable bias current $I_{\\text{bias}}$ to the amplifier.\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\n#### Operating Regions:\nFor proper linear amplification, both transistors must operate in the **saturation region**:\n1. **Transistor $M_2$:**\n   * Gate-to-source voltage: $V_{GS2} = V_b$\n   * To keep $M_2$ in saturation:\n     $$V_{DS2} \\ge V_{GS2} - V_{TH2} \\implies V_{\\text{out}} \\ge V_b - V_{TH2} = V_{OV2}$$\n   * Drain current:\n     $$I_{D2} \\approx \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2$$\n\n2. **Transistor $M_1$:**\n   * Gate-to-source voltage: $V_{GS1} = V_{\\text{in}} - V_{\\text{out}}$\n   * To keep $M_1$ in saturation:\n     $$V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_{DD} - V_{\\text{out}} \\ge V_{\\text{in}} - V_{\\text{out}} - V_{TH1} \\implies V_{\\text{in}} \\le V_{DD} + V_{TH1}$$\n   * The DC output voltage follows the input with a level shift:\n     $$V_{\\text{out}} = V_{\\text{in}} - V_{GS1}$$\n\n#### Body Effect:\nIn standard n-well / bulk CMOS processes, the p-substrate is tied to ground. Since the source of $M_1$ is at $V_{\\text{out}} > 0$, its source-to-bulk junction is reverse-biased ($V_{SB1} = V_{\\text{out}}$). This causes the threshold voltage of $M_1$ to increase with $V_{\\text{out}}$:\n$$V_{TH1} = V_{TH0} + \\gamma \\left(\\sqrt{2\\phi_F + V_{\\text{out}}} - \\sqrt{2\\phi_F}\\right)$$\nThis makes the relationship between $V_{\\text{in}}$ and $V_{\\text{out}}$ non-linear.\n\n---\n\n### 3. Small-Signal AC Analysis\n\nUsing the small-signal model with:\n* $g_{m1}$: transconductance of $M_1$\n* $g_{mb1}$: body-effect transconductance of $M_1$ ($g_{mb1} = \\eta g_{m1}$, where $\\eta \\approx 0.1 - 0.3$)\n* $r_{o1}, r_{o2}$: channel-length modulation output resistances of $M_1$ and $M_2$\n\n#### A. Voltage Gain ($A_v$)\nApplying Kirchhoff's Current Law (KCL) at the output node ($V_{\\text{out}}$):\n$$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1}v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1}} - \\frac{v_{\\text{out}}}{r_{o2}} = 0$$\n\nSolving for $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} = \\frac{g_{m1}}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}}$$\n\n* **Ideal Case** (ignoring channel-length modulation, $r_{o1}, r_{o2} \\to \\infty$):\n  $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta} < 1 \\quad (\\text{typically } 0.7 \\text{ to } 0.85)$$\n* **Without Body Effect** ($g_{mb1} = 0$, e.g., in deep n-well where source is tied to body):\n  $$A_v \\approx \\frac{g_{m1}(r_{o1} \\parallel r_{o2})}{1 + g_{m1}(r_{o1} \\parallel r_{o2})} \\approx 1$$\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the gate of $M_1$:\n* At low frequencies:\n  $$R_{\\text{in}} \\to \\infty$$\n* At high frequencies, the effective input capacitance is reduced due to the bootstrapping/follower action on $C_{gs1}$:\n  $$C_{\\text{in}} \\approx C_{gd1} + (1 - A_v)C_{gs1}$$\n  Because $A_v \\approx 1$, the loading contribution of $C_{gs1}$ is greatly attenuated.\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nSetting $v_{\\text{in}} = 0$ and applying a test voltage source $v_x$ at the output node:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2}$$\n\nSince $g_{m1} \\gg g_{o1}, g_{o2}$:\n$$R_{\\text{out}} \\approx \\frac{1}{g_{m1} + g_{mb1}} \\approx \\frac{1}{g_{m1}}$$\nThis provides a **relatively low output impedance**, suitable for driving resistive or capacitive loads.\n\n---\n\n### 4. Signal Swing Limits (Dynamic Range)\n\nTo keep both transistors saturated:\n1. **Minimum Output Voltage ($V_{\\text{out,min}}$):**\n   $$V_{\\text{out,min}} = V_{OV2} = V_b - V_{TH2}$$\n   Below this voltage, $M_2$ enters the triode region and the bias current drops drastically.\n\n2. **Maximum Output Voltage ($V_{\\text{out,max}}$):**\n   $$V_{\\text{out,max}} \\approx V_{DD} - V_{GS1}$$\n   If $V_{\\text{in}}$ is driven up to $V_{DD}$, the output can only reach $V_{DD} - V_{GS1}$ because $M_1$ requires a gate-to-source drop to conduct.\n\n---\n\n### 5. Summary of Circuit Characteristics\n\n| Parameter | Approximate Value | Notes |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} < 1$ | Non-inverting, slightly less than unity |\n| **Input Impedance ($R_{\\text{in}}$)** | Very High ($\\infty$ at DC) | Does not load the previous stage |\n| **Output Impedance ($R_{\\text{out}}$)** | Low ($\\approx 1/g_{m1}$) | Capable of driving smaller load resistances |\n| **DC Level Shift** | $-V_{GS1}$ | $V_{\\text{out}}$ is shifted down by one $V_{GS}$ |\n| **Main Applications** | **Voltage Buffer**, **Impedance Transformer**, **DC Level Shifter** | Used between high-impedance gain stages and low-impedance loads |",
        "format": "markdown",
        "sha256": "f23d92bde750fedac29ba822167a63757528376f752308ca042041d453f30c32"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as its current-source load, and gives the positive, sub-unity gain with body effect and finite output resistances. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 4176,
        "total_tokens": 5287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2260,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 4176,
        "total_tokens": 5287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2260,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed analysis of the given circuit:\n\n---\n\n### **1. Circuit Topology & Overview**\n* **Configuration:** **Common-Drain (CD) Amplifier**, commonly known as a **Source Follower**, with an active current-source load.\n* **Transistors:**\n  * **$M_1$ (Input/Driver Device):** Connected in common-drain configuration. The input voltage $V_{\\text{in}}$ is applied to its gate, the drain is tied to the supply $V_{DD}$, and the output $V_{\\text{out}}$ is taken at its source.\n  * **$M_2$ (Current Source Load):** Biased by a constant DC voltage $V_b$ at its gate, providing a stable bias current $I_{D2}$ to $M_1$.\n\n---\n\n### **2. DC (Large-Signal) Characteristics**\n\n1. **Bias Current:**\n   Assuming $M_2$ is in the saturation region:\n   $$I_{D2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2$$\n\n2. **Output Voltage ($V_{\\text{out}}$):**\n   Since $I_{D1} = I_{D2}$, the output voltage is given by:\n   $$V_{\\text{out}} = V_{\\text{in}} - V_{GS1} = V_{\\text{in}} - \\left(V_{TH1} + \\sqrt{\\frac{2I_{D1}}{\\mu_n C_{ox}(W/L)_1}}\\right)$$\n   * The circuit acts as a **level shifter**, shifting the input DC level down by $V_{GS1}$.\n\n3. **Operating Voltage Limits (Headroom):**\n   * **Minimum Output ($V_{\\text{out,min}}$):** Set by keeping $M_2$ in saturation:\n     $$V_{\\text{out,min}} = V_{DS,\\text{sat2}} = V_b - V_{TH2}$$\n   * **Maximum Input ($V_{\\text{in,max}}$):** Set by keeping $M_1$ in saturation ($V_{DS1} \\ge V_{GS1} - V_{TH1}$):\n     $$V_{\\text{DD}} - V_{\\text{out}} \\ge V_{\\text{in}} - V_{\\text{out}} - V_{TH1} \\implies V_{\\text{in,max}} \\le V_{DD} + V_{TH1}$$\n\n---\n\n### **3. Small-Signal AC Analysis**\n\nIn the small-signal regime:\n* Gate of $M_2$ is at AC ground, so $M_2$ presents an impedance of $r_{o2}$ to the output node.\n* $M_1$ has transconductance $g_{m1}$, body-effect transconductance $g_{mb1}$, and output resistance $r_{o1}$.\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\nApplying KCL at the output node ($V_{\\text{out}}$):\n$$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1}v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1}} - \\frac{v_{\\text{out}}}{r_{o2}} = 0$$\n\nSolving for $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} = \\frac{g_{m1}}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}}$$\n\n* **Neglecting channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$):**\n  $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta}$$\n  *(where $\\eta = \\frac{g_{mb1}}{g_{m1}} \\approx 0.1 \\text{ to } 0.3$, making $A_v \\approx 0.7 - 0.9$, slightly less than unity).*\n\n* **Ideal Case (No body effect and infinite $r_o$):**\n  $$A_v \\approx 1$$\n\n---\n\n#### **B. Output Impedance ($R_{\\text{out}}$)**\nSetting $v_{\\text{in}} = 0$ and applying a test voltage source $v_x$ at the output node:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2}$$\n\n$$\\boxed{R_{\\text{out}} \\approx \\frac{1}{g_{m1} + g_{mb1}} \\approx \\frac{1}{g_{m1}}}$$\n*(This represents a **low output impedance**).*\n\n---\n\n#### **C. Input Impedance ($R_{\\text{in}}$)**\nLooking into the gate of $M_1$:\n$$R_{\\text{in}} \\approx \\infty \\quad \\text{(at low to moderate frequencies)}$$\n\n---\n\n### **4. Impact of Body Effect & Non-linearity**\nBecause the bulk (substrate) of $M_1$ is typically connected to ground while its source is at $V_{\\text{out}}$, the source-to-bulk voltage $V_{SB1} = V_{\\text{out}} > 0$. \n* As $V_{\\text{out}}$ varies, $V_{TH1}$ changes according to:\n  $$V_{TH1} = V_{TH0} + \\gamma\\left(\\sqrt{2\\phi_F + V_{\\text{out}}} - \\sqrt{2\\phi_F}\\right)$$\n* This modulation of $V_{TH1}$ makes the gain non-linear across large signal swings.\n\n---\n\n### **5. Summary of Circuit Properties**\n\n| Parameter | Value / Expression | Typical Behavior |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}}$ | Non-inverting, slightly less than 1 ($\\approx 0.8$) |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ (gate oxide) | Very High |\n| **Output Impedance ($R_{\\text{out}}$)**| $\\approx 1/g_{m1}$ | Low |\n| **Main Application** | Voltage Buffer / Driver | Isolates high-impedance nodes from heavy/low-resistance loads |",
        "format": "markdown",
        "sha256": "0a4279f7fe8bf57e17535a90c27f5f57e69e63ad7193f67bcbdd37ced4467729"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as its current-source load, and derives a positive gain slightly below unity with appropriate body-effect and output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3016,
        "total_tokens": 4126,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1451,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3016,
        "total_tokens": 4126,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1451,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is an **NMOS Common-Drain Amplifier**, commonly known as a **Source Follower**, with an **active NMOS current-source load**.\n\n---\n\n### 1. Circuit Identification and Roles of Transistors\n\n* **$M_1$ (Input / Drive Transistor):** \n  * Operates in a **common-drain** configuration.\n  * The input signal $V_{\\text{in}}$ is applied to its gate, the drain is tied to the supply rail $V_{DD}$ (which serves as an AC ground), and the output $V_{\\text{out}}$ is taken from its source.\n* **$M_2$ (Active Load / Current Source):** \n  * Acts as a constant current source biased by the DC gate voltage $V_b$.\n  * Sets the DC bias current $I_D$ through $M_1$ and provides high output resistance to maximize the amplifier's gain and linearity.\n\n---\n\n### 2. Large-Signal (DC) Operation\n\nAssuming both transistors are in the **saturation region**:\n\n1. **Bias Current:**\n   The current drawn by $M_2$ is fixed by $V_b$:\n   $$I_{D} \\approx \\frac{1}{2} \\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2$$\n\n2. **Output Voltage ($V_{\\text{out}}$):**\n   Since $I_{D1} = I_{D2} = I_D$:\n   $$V_{\\text{out}} = V_{\\text{in}} - V_{GS1} = V_{\\text{in}} - V_{TH1} - \\sqrt{\\frac{2 I_D}{\\mu_n C_{\\text{ox}} (W/L)_1}}$$\n   * The circuit acts as a **DC level shifter**, shifting the input down by one gate-to-source voltage drop ($V_{GS1}$).\n\n3. **Body Effect:**\n   * In standard bulk CMOS processes, the substrate (bulk) of $M_1$ is connected to ground, making $V_{SB1} = V_{\\text{out}} > 0$.\n   * As $V_{\\text{out}}$ changes, the threshold voltage $V_{TH1}$ varies nonlinearly:\n     $$V_{TH1} = V_{TH0} + \\gamma \\left(\\sqrt{2\\phi_F + V_{\\text{out}}} - \\sqrt{2\\phi_F}\\right)$$\n   * This body effect causes non-linearity in the large-signal transfer characteristic.\n\n---\n\n### 3. Small-Signal Analysis\n\n#### A. Voltage Gain ($A_v$)\nUsing the small-signal model at the output node and accounting for:\n* Transconductance of $M_1$: $g_{m1}$\n* Body effect transconductance of $M_1$: $g_{mb1} = \\eta g_{m1}$\n* Output resistances: $r_{o1}$ and $r_{o2}$\n\nApplying KCL at the $V_{\\text{out}}$ node:\n$$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1} v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1}} - \\frac{v_{\\text{out}}}{r_{o2}} = 0$$\n\nSolving for $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} = \\frac{g_{m1}}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}}$$\n\n* **Ideal Case ($r_{o1}, r_{o2} \\to \\infty$ and neglecting body effect $g_{mb1} = 0$):**\n  $$A_v \\approx 1$$\n* **Realistic Case (with body effect, assuming $r_o \\gg \\frac{1}{g_m}$):**\n  $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta} \\quad (\\approx 0.7 \\text{ to } 0.9)$$\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the gate of $M_1$:\n$$R_{\\text{in}} \\approx \\infty \\quad \\text{(at low frequencies)}$$\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nLooking into the output node (with $v_{\\text{in}} = 0$):\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m1} + g_{mb1}} \\approx \\frac{1}{g_{m1}}$$\nThis provides a **relatively low output resistance**.\n\n---\n\n### 4. Output Voltage Swing\n\nFor both transistors to remain in saturation:\n* **Minimum output voltage:** Determined by keeping $M_2$ saturated:\n  $$V_{\\text{out,min}} \\ge V_b - V_{TH2} = V_{ov2}$$\n* **Maximum output voltage:** Limited by the input swing and keeping $M_1$ saturated:\n  $$V_{\\text{out,max}} \\approx V_{DD} - V_{ov1}$$\n\n---\n\n### 5. Summary of Circuit Characteristics\n\n| Parameter | Value / Expression | Typical Property |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\frac{g_{m1}}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}} < 1$ | Non-inverting, slightly less than unity |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ | Extremely high |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m1}}$ | Low |\n| **Primary Function** | Voltage Buffer / Impedance Transformer | Drives low-impedance loads from high-impedance sources |",
        "format": "markdown",
        "sha256": "ff031da3949653cbe2d89c4ecb79c2e69a1295aab2e2d7df9609b88d3406a89b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as its current-source load, and gives a positive gain below unity with the appropriate body-effect and output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3176,
        "total_tokens": 4286,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1742,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3176,
        "total_tokens": 4286,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1742,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Identification and Overview\n\nThe given circuit is a standard **CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**, which also functions as a **Complementary Common-Source Amplifier** when biased in the active (saturation) region.\n\n* **$M_1$ (Bottom Transistor):** N-channel MOSFET (NMOS), acting as the pull-down device. Its source is connected to Ground ($0\\text{ V}$).\n* **$M_2$ (Top Transistor):** P-channel MOSFET (PMOS), acting as the pull-up device. Its source is connected to the supply rail ($V_{DD}$).\n* **Input ($V_{\\text{in}}$):** Tied to the gates of both $M_1$ and $M_2$.\n* **Output ($V_{\\text{out}}$):** Taken from the common drain connection of $M_1$ and $M_2$.\n\n---\n\n### 2. Digital Operation (Logic Inverter / NOT Gate)\n\nThe circuit performs the logical **NOT** operation:\n\n| Input ($V_{\\text{in}}$) | NMOS ($M_1$) State | PMOS ($M_2$) State | Output ($V_{\\text{out}}$) | Logic Output |\n| :--- | :--- | :--- | :--- | :--- |\n| **Low ($0\\text{ V}$)** | **OFF** ($V_{GS1} = 0 < V_{TH,n}$) | **ON** ($V_{SG2} = V_{DD} > \\|V_{TH,p}\\|$) | $V_{DD}$ | **High ('1')** |\n| **High ($V_{DD}$)** | **ON** ($V_{GS1} = V_{DD} > V_{TH,n}$) | **OFF** ($V_{SG2} = 0 < \\|V_{TH,p}\\|$) | $0\\text{ V}$ (GND) | **Low ('0')** |\n\n#### Key Digital Features:\n* **Rail-to-Rail Swing:** The output swings fully between $0\\text{ V}$ and $V_{DD}$.\n* **Zero Static Power Dissipation:** In steady state, one transistor is always OFF, preventing any direct DC path from $V_{DD}$ to ground (neglecting subthreshold leakage).\n* **Dynamic Power Consumption:** Occurs only during switching transitions when charging/discharging load capacitance:\n  $$P_{\\text{dyn}} = C_L \\cdot V_{DD}^2 \\cdot f$$\n\n---\n\n### 3. Voltage Transfer Characteristics (VTC) & Operating Regions\n\nAs $V_{\\text{in}}$ increases from $0\\text{ V}$ to $V_{DD}$, the transistors transition through 5 distinct operating regions:\n\n| Region | Input Condition | NMOS ($M_1$) | PMOS ($M_2$) | Output Voltage ($V_{\\text{out}}$) |\n|:---|:---|:---|:---|:---|\n| **A** | $V_{\\text{in}} < V_{TH,n}$ | Cutoff | Triode (Linear) | $V_{\\text{out}} = V_{DD}$ |\n| **B** | $V_{TH,n} \\le V_{\\text{in}} < V_M$ | Saturation | Triode (Linear) | $V_{\\text{out}}$ drops gradually |\n| **C** | $V_{\\text{in}} \\approx V_M$ (Transition) | **Saturation** | **Saturation** | High slope (Maximum Gain) |\n| **D** | $V_M < V_{\\text{in}} \\le V_{DD} - |V_{TH,p}|$ | Triode (Linear) | Saturation | $V_{\\text{out}}$ drops rapidly towards $0$ |\n| **E** | $V_{\\text{in}} > V_{DD} - |V_{TH,p}|$ | Triode (Linear) | Cutoff | $V_{\\text{out}} = 0\\text{ V}$ |\n\n#### Switching Threshold ($V_M$ / Inversion Voltage)\nThe threshold voltage $V_M$ is the point where $V_{\\text{in}} = V_{\\text{out}}$. Equating the saturation currents $I_{D1} = I_{D2}$:\n\n$$\\frac{1}{2} k_n' \\left(\\frac{W}{L}\\right)_1 (V_M - V_{TH,n})^2 = \\frac{1}{2} k_p' \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_M - |V_{TH,p}|)^2$$\n\nSolving for $V_M$:\n$$V_M = \\frac{V_{TH,n} + \\sqrt{\\frac{k_p}{k_n}}(V_{DD} - |V_{TH,p}|)}{1 + \\sqrt{\\frac{k_p}{k_n}}}$$\n\n* For a **symmetric inverter** with equal noise margins ($V_M = V_{DD}/2$), the aspect ratios are sized such that:\n  $$\\mu_n \\left(\\frac{W}{L}\\right)_1 \\approx \\mu_p \\left(\\frac{W}{L}\\right)_2 \\implies \\left(\\frac{W}{L}\\right)_2 \\approx (2 \\sim 3) \\times \\left(\\frac{W}{L}\\right)_1$$\n  *(since electron mobility $\\mu_n$ is $2\\text{--}3$ times greater than hole mobility $\\mu_p$)*.\n\n---\n\n### 4. Small-Signal Analog Analysis (Amplifier)\n\nWhen biased in **Region C** ($V_{\\text{in}} = V_{\\text{out}} = V_M$), both transistors are in the **saturation region**, and the circuit acts as a high-gain, self-biased **Push-Pull Inverting Amplifier**.\n\n#### Small-Signal Parameters:\n* **Transconductance of $M_1$:** $g_{m1} = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH,n})$\n* **Transconductance of $M_2$:** $g_{m2} = \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{TH,p}|)$\n* **Output Resistance:** $r_{o1} = \\frac{1}{\\lambda_1 I_D}$, $\\quad r_{o2} = \\frac{1}{\\lambda_2 I_D}$\n\n#### Small-Signal Equivalent:\n* **Total Transconductance:** \n  $$G_m = g_{m1} + g_{m2}$$\n* **Total Output Resistance:** \n  $$R_{\\text{out}} = r_{o1} \\parallel r_{o2}$$\n* **Small-Signal Voltage Gain ($A_v$):**\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = - (g_{m1} + g_{m2}) (r_{o1} \\parallel r_{o2})$$\n\n---\n\n### 5. Summary of Circuit Strengths\n\n1. **Digital Applications:**\n   * High input impedance (purely capacitive).\n   * Extremely low static power consumption.\n   * High noise margins and full rail-to-rail swing.\n   * Basic building block for complex logic gates (NAND, NOR, flip-flops) and memory cells (SRAM).\n\n2. **Analog Applications:**\n   * Higher voltage gain and $G_m$ than a standard single-transistor CS stage with a passive/current-source load because both transistors actively contribute to the amplification (push-pull action).",
        "format": "markdown",
        "sha256": "69d069be91fb9890b9ea7aa0f3c2ada9714bca03bd6c6c60acb11a91889c7ee3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and its inverting operation. The additional digital and small-signal analysis is consistent with the essential answer.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3222,
        "total_tokens": 4332,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1481,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3222,
        "total_tokens": 4332,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1481,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure from both a **digital** and an **analog** perspective.\n\n---\n\n### 1. Circuit Identification and Topology\n* **Transistors**:\n  * **$M_1$**: N-channel MOSFET (NMOS) with its source connected to Ground ($0\\text{ V}$).\n  * **$M_2$**: P-channel MOSFET (PMOS) with its source connected to the positive supply rail ($V_{DD}$).\n* **Connections**:\n  * The gates of $M_1$ and $M_2$ are tied together to form the input terminal ($V_{\\text{in}}$).\n  * The drains of $M_1$ and $M_2$ are tied together to form the output terminal ($V_{\\text{out}}$).\n* **Circuit Name**: Standard **CMOS Inverter** (in digital design) or a **Complementary Common-Source / Inverter-Based Amplifier** (in analog design).\n\n---\n\n### 2. Digital Operation (Logic Inverter)\n\nIn digital circuits, this topology implements a fundamental **NOT gate**.\n\n#### A. Static Logic States\n1. **Input LOW ($V_{\\text{in}} \\approx 0\\text{ V}$)**:\n   * $V_{GS1} = 0 < V_{TH,N} \\implies M_1$ is **OFF** (Cut-off).\n   * $|V_{GS2}| = V_{DD} > |V_{TH,P}| \\implies M_2$ is **ON** (Triode/Linear region).\n   * The output is pulled up to the positive supply: **$V_{\\text{out}} = V_{DD}$ (Logic HIGH)**.\n   * Static power dissipation is virtually zero (only subthreshold leakage flows).\n\n2. **Input HIGH ($V_{\\text{in}} \\approx V_{DD}$)**:\n   * $V_{GS1} = V_{DD} > V_{TH,N} \\implies M_1$ is **ON** (Triode/Linear region).\n   * $|V_{GS2}| = 0 < |V_{TH,P}| \\implies M_2$ is **OFF** (Cut-off).\n   * The output is pulled down to ground: **$V_{\\text{out}} = 0\\text{ V}$ (Logic LOW)**.\n   * Static power dissipation is virtually zero.\n\n#### B. Voltage Transfer Characteristic (VTC) & Switching Threshold ($V_M$)\nWhen $V_{\\text{in}} = V_{\\text{out}} = V_M$, both transistors operate in the **saturation region**:\n$$I_{D1} = I_{D2}$$\n$$\\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_M - V_{TH,N})^2 = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_M - |V_{TH,P}|)^2$$\n\nSolving for the switching threshold $V_M$:\n$$V_M = \\frac{V_{TH,N} + \\sqrt{\\frac{k_p}{k_n}} \\left(V_{DD} - |V_{TH,P}|\\right)}{1 + \\sqrt{\\frac{k_p}{k_n}}}$$\n*(where $k_n = \\mu_n C_{ox} (W/L)_1$ and $k_p = \\mu_p C_{ox} (W/L)_2$)*\n\nFor a symmetric inverter ($V_M = V_{DD}/2$) assuming $V_{TH,N} = |V_{TH,P}|$, the sizing typically requires:\n$$\\left(\\frac{W}{L}\\right)_2 \\approx 2\\text{ to }3 \\times \\left(\\frac{W}{L}\\right)_1$$\nto compensate for the lower mobility of holes ($\\mu_p$) compared to electrons ($\\mu_n$).\n\n---\n\n### 3. Analog Operation (Inverter-Based Amplifier)\n\nWhen biased around the midpoint $V_{\\text{in}} \\approx V_M$, both transistors enter saturation simultaneously, acting as a high-gain complementary common-source stage.\n\n#### A. Small-Signal Parameters\n* **Transconductances**:\n  * NMOS: $g_{m1} = \\sqrt{2 \\mu_n C_{ox} (W/L)_1 I_D}$\n  * PMOS: $g_{m2} = \\sqrt{2 \\mu_p C_{ox} (W/L)_2 I_D}$\n* **Total Transconductance ($G_m$)**:\n  Since both gates receive $v_{\\text{in}}$ and both drains drive $v_{\\text{out}}$, their small-signal currents add constructively:\n  $$G_m = g_{m1} + g_{m2}$$\n* **Output Resistance ($R_{\\text{out}}$)**:\n  $$R_{\\text{out}} = r_{o1} \\parallel r_{o2} = \\frac{1}{\\lambda_1 I_D + \\lambda_2 I_D}$$\n\n#### B. Small-Signal Voltage Gain ($A_v$)\n$$A_v = - G_m R_{\\text{out}} = -(g_{m1} + g_{m2}) (r_{o1} \\parallel r_{o2})$$\n\n---\n\n### 4. Key Advantages & Challenges\n\n| Feature | Description / Advantage | Challenge / Trade-off |\n| :--- | :--- | :--- |\n| **Current Reuse** | The same DC current flows through both transistors, doubling effective $g_m/I_D$ for high power efficiency. | High sensitivity to PVT (Process, Voltage, Temperature) variations. |\n| **Output Swing** | Wide output dynamic range (near rail-to-rail swing). | Requires external DC biasing (e.g., feedback resistor $R_F$ from output to input) to maintain operation in saturation. |\n| **Low-Voltage Friendly** | No tail current source is needed, requiring only one $V_{DS,\\text{sat}}$ from each supply rail. | Poor **PSRR** (Power Supply Rejection Ratio), as supply ripple couples directly through $M_2$. |",
        "format": "markdown",
        "sha256": "32c3e063249a9e77e7757e441edd31ce468201a71aade02b2e64c499335b9421"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the standard CMOS inverter, with an NMOS pull-down and PMOS pull-up, and describes its inverting logic operation. Its analog gain is also correctly stated as negative; supplementary analysis is not required for full credit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3321,
        "total_tokens": 4431,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3321,
        "total_tokens": 4431,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **standard CMOS Inverter** (Complementary Metal-Oxide-Semiconductor inverter), which can function both as a fundamental **digital logic gate (NOT gate)** and as an **analog push-pull amplifier** (complementary common-source stage).\n\n---\n\n### 1. Circuit Components\n* **$M_1$ (NMOS Transistor):** Pull-down device with its source connected to Ground ($0\\text{ V}$), drain to $V_{\\text{out}}$, and gate to $V_{\\text{in}}$.\n* **$M_2$ (PMOS Transistor):** Pull-up device with its source connected to $V_{DD}$, drain to $V_{\\text{out}}$, and gate to $V_{\\text{in}}$.\n\n---\n\n### 2. Digital Operation (Large-Signal Analysis)\n\nThe CMOS inverter operates by complementary switching between the two transistors:\n\n| Input Voltage ($V_{\\text{in}}$) | $M_1$ (NMOS) State | $M_2$ (PMOS) State | Output Voltage ($V_{\\text{out}}$) | Logic Function |\n| :--- | :--- | :--- | :--- | :--- |\n| **Low ($0\\text{ V}$ / Logic 0)** | **Cut-off** ($V_{GS1} = 0 < V_{TH,n}$) | **Triode/Linear** ($|V_{GS2}| = V_{DD} > \\|V_{TH,p}\\|$) | $V_{DD}$ (Logic 1) | Inverts Low to High |\n| **High ($V_{DD}$ / Logic 1)** | **Triode/Linear** ($V_{GS1} = V_{DD} > V_{TH,n}$) | **Cut-off** ($|V_{GS2}| = 0 < \\|V_{TH,p}\\|$) | $0\\text{ V}$ (Logic 0) | Inverts High to Low |\n\n#### **Voltage Transfer Characteristic (VTC) Regions:**\n1. **Region A ($V_{\\text{in}} < V_{TH,n}$):** $M_1$ is **OFF**, $M_2$ is in **Triode**. $V_{\\text{out}} = V_{DD}$.\n2. **Region B ($V_{TH,n} < V_{\\text{in}} < V_M$):** $M_1$ is in **Saturation**, $M_2$ is in **Triode**. $V_{\\text{out}}$ begins to drop.\n3. **Region C ($V_{\\text{in}} = V_M$, Switching Threshold):** Both $M_1$ and $M_2$ are in **Saturation**. This region features very high voltage gain.\n4. **Region D ($V_M < V_{\\text{in}} < V_{DD} - |V_{TH,p}|$):** $M_1$ is in **Triode**, $M_2$ is in **Saturation**.\n5. **Region E ($V_{\\text{in}} > V_{DD} - |V_{TH,p}|$):** $M_1$ is in **Triode**, $M_2$ is **OFF**. $V_{\\text{out}} = 0\\text{ V}$.\n\n#### **Switching Threshold ($V_M$ / $V_{SP}$):**\nSetting $I_{D1} = I_{D2}$ when $V_{\\text{in}} = V_{\\text{out}} = V_M$ (both in saturation):\n$$V_M = \\frac{V_{TH,n} + \\sqrt{\\frac{k_p}{k_n}} (V_{DD} - |V_{TH,p}|)}{1 + \\sqrt{\\frac{k_p}{k_n}}}$$\nwhere $k_n = \\mu_n C_{ox} (W/L)_1$ and $k_p = \\mu_p C_{ox} (W/L)_2$.\n\n* If the inverter is designed symmetrically ($k_n = k_p$ and $V_{TH,n} = |V_{TH,p}|$), then:\n  $$V_M = \\frac{V_{DD}}{2}$$\n\n---\n\n### 3. Analog Operation (Small-Signal Amplifier)\n\nWhen biased in Region C ($V_{\\text{in}} \\approx V_M$), the circuit acts as a **complementary common-source push-pull amplifier**:\n\n* **Total Transconductance ($G_m$):** Both transistors contribute in parallel:\n  $$G_m = g_{m1} + g_{m2}$$\n* **Output Resistance ($R_{\\text{out}}$):**\n  $$R_{\\text{out}} = r_{o1} \\parallel r_{o2} = \\frac{1}{\\lambda_1 I_D + \\lambda_2 I_D}$$\n* **Small-Signal Voltage Gain ($A_v$):**\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$$\n\n*Because both transistors contribute to the transconductance, this configuration provides nearly double the $g_m$ for the same bias current compared to a single-transistor CS amplifier.*\n\n---\n\n### 4. Key Characteristics & Advantages\n1. **Full Rail-to-Rail Swing:** The output swings fully from $0\\text{ V}$ to $V_{DD}$.\n2. **Extremely Low Static Power Consumption:** In steady logic states ($0$ or $1$), one transistor is completely off, resulting in negligible static current (only subthreshold leakage).\n3. **High Input Impedance:** Since the input connects directly to the insulated MOS gates, the static input resistance is effectively infinite ($R_{\\text{in}} \\to \\infty$).\n4. **Dynamic Power Dissipation:** Power is primarily consumed during switching:\n   $$P_{\\text{dyn}} = C_L V_{DD}^2 f$$",
        "format": "markdown",
        "sha256": "85d7a3e92a430f5cf578bb2aa9bc94b5eca069b0dcd1583bc37eb4f345493e29"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and describes its inverting operation. The additional analog analysis is consistent with the circuit; no essential error contradicts its operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2919,
        "total_tokens": 4029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2919,
        "total_tokens": 4029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Overview and Architecture\n\nThe circuit consists of two $N$-channel MOSFETs ($M_1$ and $M_2$) with their gates tied together to the common input $V_{\\text{in}}$, and their channel connection node forming the output $V_{\\text{out}}$:\n\n* **$M_1$ (Top NMOS):** Configured as a **Source Follower (Common-Drain)** stage. Its drain is connected to the supply $V_{DD}$, its gate to $V_{\\text{in}}$, and its source to $V_{\\text{out}}$.\n* **$M_2$ (Bottom NMOS):** Configured as a **Common-Source** amplifier. Its drain is connected to $V_{\\text{out}}$, its gate to $V_{\\text{in}}$, and its source to ground.\n\n---\n\n### 2. Qualitative / Intuitive Operation\n\nWhen the input voltage $V_{\\text{in}}$ increases:\n1. **$M_1$ acts to pull $V_{\\text{out}}$ UP:** As $V_{\\text{in}}$ rises, the gate of $M_1$ goes high, increasing its source voltage $V_{\\text{out}}$ (non-inverting action).\n2. **$M_2$ acts to pull $V_{\\text{out}}$ DOWN:** As $V_{\\text{in}}$ rises, $M_2$ conducts more current to ground, pulling the drain voltage $V_{\\text{out}}$ low (inverting action).\n\nBecause both transistors are driven simultaneously by the same input signal $V_{\\text{in}}$, they **compete** against each other at the output node $V_{\\text{out}}$. The net gain and behavior depend on the relative transconductances ($g_{m1}$ vs. $g_{m2}$).\n\n---\n\n### 3. Small-Signal Analysis\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\n\nLet us model the circuit for small-signal perturbations:\n* For **$M_1$**:\n  * Gate-to-source voltage: $v_{gs1} = v_{\\text{in}} - v_{\\text{out}}$\n  * Bulk-to-source voltage (body effect): $v_{bs1} = -v_{\\text{out}}$\n  * Current generated: $i_{d1} = g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1} v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1}}$ (directed into the output node)\n* For **$M_2$**:\n  * Gate-to-source voltage: $v_{gs2} = v_{\\text{in}}$\n  * Bulk-to-source voltage: $v_{bs2} = 0$\n  * Current generated: $i_{d2} = g_{m2} v_{\\text{in}} + \\frac{v_{\\text{out}}}{r_{o2}}$ (directed out of the output node to ground)\n\nApplying Kirchhoff's Current Law (KCL) at the output node ($V_{\\text{out}}$):\n$$\\sum I_{\\text{leaving}} = 0$$\n$$g_{m2} v_{\\text{in}} + \\frac{v_{\\text{out}}}{r_{o2}} + \\frac{v_{\\text{out}}}{r_{o1}} + g_{mb1} v_{\\text{out}} - g_{m1}(v_{\\text{in}} - v_{\\text{out}}) = 0$$\n\nRearranging terms:\n$$(g_{m1} + g_{mb1} + g_{o1} + g_{o2}) v_{\\text{out}} = (g_{m1} - g_{m2}) v_{\\text{in}}$$\n\nwhere $g_{o1} = 1/r_{o1}$ and $g_{o2} = 1/r_{o2}$.\n\nThus, the small-signal voltage gain is:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}$$\n\nNeglecting channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$) and body effect ($g_{mb1} \\approx 0$):\n$$A_v \\approx \\frac{g_{m1} - g_{m2}}{g_{m1}} = 1 - \\frac{g_{m2}}{g_{m1}}$$\n\n---\n\n#### **B. Output Resistance ($R_{\\text{out}}$)**\n\nTo find the output resistance, set $v_{\\text{in}} = 0$ and apply a test voltage $v_x$ at the output node:\n* $M_2$ contributes conductance: $g_{o2}$\n* $M_1$ contributes conductance: $g_{m1} + g_{mb1} + g_{o1}$\n\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\nThe output impedance is relatively low because it is dominated by the source resistance ($\\approx 1/g_{m1}$) of $M_1$.\n\n---\n\n#### **C. Input Resistance ($R_{\\text{in}}$)**\n\nAt low to moderate frequencies, looking into the insulated gates:\n$$R_{\\text{in}} = \\infty$$\n\n---\n\n### 4. Gain Regimes & Special Cases\n\nDepending on the sizing and bias conditions of $M_1$ and $M_2$:\n\n| Condition | Gain Behavior | Description |\n| :--- | :--- | :--- |\n| **$g_{m1} > g_{m2}$** | $A_v > 0$ (Non-inverting) | Source follower action dominates; output follows the input ($0 < A_v < 1$). |\n| **$g_{m1} < g_{m2}$** | $A_v < 0$ (Inverting) | Common-source action dominates; circuit acts as an inverting amplifier. |\n| **$g_{m1} = g_{m2}$** | $A_v = 0$ | Perfect cancellation; small-signal variations at the input produce **zero** output change. |\n\n---\n\n### 5. Large-Signal / DC Operating Regimes\n\nFor both transistors to conduct current, $V_{\\text{in}} > V_{TH}$:\n1. **$V_{\\text{in}} < V_{TH}$:** Both transistors are **OFF**, $I_D = 0$, and $V_{\\text{out}} \\approx 0\\text{ V}$.\n2. **$V_{\\text{in}} > V_{TH}$:** \n   * Gate drive of $M_2$ is $V_{GS2} = V_{\\text{in}}$.\n   * Gate drive of $M_1$ is $V_{GS1} = V_{\\text{in}} - V_{\\text{out}} < V_{GS2}$.\n   * Since both transistors carry the exact same DC current ($I_{D1} = I_{D2}$), $M_2$ has a significantly larger overdrive voltage than $M_1$. \n   * As a result, $M_2$ is typically pulled into the **Triode (Linear) region** ($V_{\\text{out}} < V_{\\text{in}} - V_{TH2}$), while $M_1$ operates in **Saturation** ($V_{DD} - V_{\\text{out}} > V_{GS1} - V_{TH1}$).",
        "format": "markdown",
        "sha256": "143aca551cf15715532694891b207bb38aa9f5c4ccbef12e76055c48cac267ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies both devices as NMOS and recognizes the upper source follower and lower pull-down. But its small-signal analysis treats the lower device like a common-source amplifier and claims the gain can be negative; the lower device is in triode, and the circuit is a non-inverting attenuator, not an inverter. It also incorrectly says the output is approximately 0 V when both devices are off.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 5594,
        "total_tokens": 6694,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3848,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 5594,
        "total_tokens": 6694,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3848,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Overview and Identification\n\nThe circuit consists of two $N$-channel MOSFETs ($M_1$ and $M_2$) driven by a common input voltage $V_{\\text{in}}$ with their outputs tied together to form $V_{\\text{out}}$:\n\n* **$M_1$ (Top NMOS):** Operates as a **Source Follower (Common-Drain amplifier)**.\n  * Drain $\\rightarrow V_{DD}$\n  * Gate $\\rightarrow V_{\\text{in}}$\n  * Source $\\rightarrow V_{\\text{out}}$\n* **$M_2$ (Bottom NMOS):** Operates as a **Common-Source amplifier**.\n  * Drain $\\rightarrow V_{\\text{out}}$\n  * Gate $\\rightarrow V_{\\text{in}}$\n  * Source $\\rightarrow \\text{GND}$\n\nThis configuration is a parallel combination of a common-drain stage (which provides non-inverting gain) and a common-source stage (which provides inverting gain).\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nAssuming both transistors operate in the **saturation region**:\n$$I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{GS1} - V_{TH1})^2 = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{\\text{out}} - V_{TH1})^2$$\n\n$$I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{GS2} - V_{TH2})^2 = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{\\text{in}} - V_{TH2})^2$$\n\nNeglecting channel-length modulation ($\\lambda = 0$) and assuming no current leaves the output pin ($I_{D1} = I_{D2}$):\n\n$$\\sqrt{\\left(\\frac{W}{L}\\right)_1} (V_{\\text{in}} - V_{\\text{out}} - V_{TH1}) = \\sqrt{\\left(\\frac{W}{L}\\right)_2} (V_{\\text{in}} - V_{TH2})$$\n\nSolving for $V_{\\text{out}}$:\n$$V_{\\text{out}} = \\left(1 - \\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\right) V_{\\text{in}} - V_{TH1} + \\sqrt{\\frac{(W/L)_2}{(W/L)_1}} V_{TH2}$$\n\n---\n\n### 3. Small-Signal Voltage Gain ($A_v$)\n\nUsing the small-signal model at the output node $V_{\\text{out}}$:\n\n* Small-signal current delivered by $M_1$:\n  $$i_1 = g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1} v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1}}$$\n* Small-signal current drawn by $M_2$:\n  $$i_2 = g_{m2} v_{\\text{in}} + \\frac{v_{\\text{out}}}{r_{o2}}$$\n\nApplying Kirchhoff's Current Law ($\\text{KCL}$) at node $V_{\\text{out}}$ ($i_1 = i_2$):\n$$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1} v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1}} = g_{m2} v_{\\text{in}} + \\frac{v_{\\text{out}}}{r_{o2}}$$\n\nRearranging for the voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n\n$$A_v = \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}$$\n\n#### Ideal Approximation (Neglecting body effect $g_{mb1}=0$ and $r_o \\to \\infty$):\n$$A_v \\approx \\frac{g_{m1} - g_{m2}}{g_{m1}} = 1 - \\frac{g_{m2}}{g_{m1}} = 1 - \\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n---\n\n### 4. Gain Behavior Based on Transistor Sizing\n\nThe overall gain depends strongly on the relative transconductances (or aspect ratios) of the two devices:\n\n| Condition | Transconductance | Small-Signal Gain ($A_v$) | Circuit Behavior |\n| :--- | :--- | :--- | :--- |\n| **$(W/L)_1 > (W/L)_2$** | $g_{m1} > g_{m2}$ | **$0 < A_v < 1$** (Positive) | **Source Follower dominant** (Non-inverting attenuator/buffer) |\n| **$(W/L)_1 = (W/L)_2$** | $g_{m1} = g_{m2}$ | **$A_v = 0$** | **Zero Gain** (Output is independent of small variations in $V_{\\text{in}}$) |\n| **$(W/L)_1 < (W/L)_2$** | $g_{m1} < g_{m2}$ | **$A_v < 0$** (Negative) | **Common-Source dominant** (Inverting amplifier) |\n\n---\n\n### 5. Input and Output Impedances\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  $$R_{\\text{in}} \\approx \\infty \\quad \\text{(at low frequencies, looking into MOS gates)}$$\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  Setting $v_{\\text{in}} = 0$ and applying a test voltage $v_x$ at $V_{\\text{out}}$:\n  $$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} \\approx \\frac{1}{g_{m1}}$$\n  The circuit exhibits a **low output impedance**, characteristic of a source-follower stage.\n\n---\n\n### Summary\nThis circuit is a **composite Common-Drain / Common-Source amplifier**. By sizing $(W/L)_1$ and $(W/L)_2$, the circuit can be configured to have a positive gain, an inverting gain, or a gain of zero, all while maintaining a relatively low output resistance set primarily by $1/g_{m1}$.",
        "format": "markdown",
        "sha256": "01cf0e8903da820377e275cb2673c75b91880b62b03341181ea894df147d2ef9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies both devices as NMOS and the upper device as a source follower, but incorrectly assumes the lower device is in saturation. That leads to the false claim that sizing can make the gain negative; when both conduct, the lower device operates in triode and the output follows the input with positive gain.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 4159,
        "total_tokens": 5259,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2586,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 4159,
        "total_tokens": 5259,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2586,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Description and Topology\n\nThe circuit consists of two **NMOS** transistors ($M_1$ and $M_2$):\n* **$M_1$ (Top NMOS):** Configured as a **Source Follower (Common-Drain)**.\n  * Drain is connected to $V_{DD}$.\n  * Gate is connected to the input $V_{\\text{in}}$.\n  * Source is connected to the output $V_{\\text{out}}$.\n* **$M_2$ (Bottom NMOS):** Configured as a **Common-Source** stage.\n  * Drain is connected to the output $V_{\\text{out}}$.\n  * Gate is connected to the input $V_{\\text{in}}$.\n  * Source is connected to ground.\n\nBoth transistors are driven simultaneously by the same input voltage $V_{\\text{in}}$, and the output $V_{\\text{out}}$ is taken from their shared node.\n\n---\n\n### 2. DC Operating Regions\n\n#### A. Cut-off Region ($V_{\\text{in}} < V_{TH}$)\n* If $V_{\\text{in}} < V_{TH2}$, transistor $M_2$ is **OFF**.\n* Since $V_{\\text{out}}$ cannot be negative, $V_{GS1} = V_{\\text{in}} - V_{\\text{out}} \\le V_{\\text{in}} < V_{TH1}$, so $M_1$ is also **OFF**.\n* Both transistors are in cut-off, and no static current flows.\n\n#### B. Active Region ($V_{\\text{in}} > V_{TH}$)\nWhen $V_{\\text{in}}$ rises above the threshold voltage:\n\n1. **State of $M_1$:**\n   * For $M_1$ to conduct, $V_{GS1} = V_{\\text{in}} - V_{\\text{out}} > V_{TH1} \\implies V_{\\text{out}} < V_{\\text{in}} - V_{TH1}$.\n   * The drain-to-source voltage is $V_{DS1} = V_{DD} - V_{\\text{out}}$.\n   * For saturation: $V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_{DD} - V_{\\text{out}} \\ge V_{\\text{in}} - V_{\\text{out}} - V_{TH1} \\implies V_{\\text{in}} \\le V_{DD} + V_{TH1}$.\n   * Since $V_{\\text{in}} \\le V_{DD}$ typically, **$M_1$ operates in the SATURATION region**.\n\n2. **State of $M_2$:**\n   * Gate overdrive: $V_{OV2} = V_{GS2} - V_{TH2} = V_{\\text{in}} - V_{TH2}$.\n   * Drain-source voltage: $V_{DS2} = V_{\\text{out}}$.\n   * Since $M_1$ conducts, we must have $V_{\\text{out}} < V_{\\text{in}} - V_{TH1}$. \n   * Since $V_{TH1} \\ge V_{TH2}$ (due to the body effect on $M_1$ where $V_{SB1} = V_{\\text{out}} > 0$), it follows that:\n     $$V_{DS2} = V_{\\text{out}} < V_{\\text{in}} - V_{TH2} = V_{GS2} - V_{TH2}$$\n   * Because $V_{DS2} < V_{GS2} - V_{TH2}$, **$M_2$ is ALWAYS in the TRIODE (Linear) region** when both transistors conduct.\n\n---\n\n### 3. Large-Signal Current Equations\n\nEquating the currents through $M_1$ (saturation) and $M_2$ (triode):\n\n$$I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{\\text{out}} - V_{TH1})^2$$\n\n$$I_{D2} = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 \\left[ (V_{\\text{in}} - V_{TH2})V_{\\text{out}} - \\frac{1}{2}V_{\\text{out}}^2 \\right]$$\n\nSetting $I_{D1} = I_{D2}$ allows one to solve for $V_{\\text{out}}$ as a function of $V_{\\text{in}}$.\n\n---\n\n### 4. Small-Signal Analysis\n\nTo find the small-signal voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n\n1. **Current contributed by $M_1$:**\n   $$i_{d1} = g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1}v_{\\text{out}} - g_{ds1}v_{\\text{out}} = g_{m1}v_{\\text{in}} - (g_{m1} + g_{mb1} + g_{ds1})v_{\\text{out}}$$\n\n2. **Current drawn by $M_2$:**\n   $$i_{d2} = g_{m2}v_{\\text{in}} + g_{ds2}v_{\\text{out}}$$\n\n3. **Applying KCL at the output node ($i_{d1} = i_{d2}$):**\n   $$g_{m1}v_{\\text{in}} - (g_{m1} + g_{mb1} + g_{ds1})v_{\\text{out}} = g_{m2}v_{\\text{in}} + g_{ds2}v_{\\text{out}}$$\n\n   Rearranging terms:\n   $$(g_{m1} - g_{m2})v_{\\text{in}} = (g_{m1} + g_{mb1} + g_{ds1} + g_{ds2})v_{\\text{out}}$$\n\n#### **Voltage Gain ($A_v$):**\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + g_{ds1} + g_{ds2}}$$\n\n*(Note: Since $M_2$ is in the triode region, $g_{ds2} \\approx \\mu_n C_{ox} (W/L)_2 (V_{\\text{in}} - V_{TH2})$ is relatively large).*\n\n---\n\n### 5. Physical Intuition and Behavior\n\n* **Competing Actions:**\n  * **$M_1$** acts as a source follower, trying to pull $V_{\\text{out}}$ **UP** as $V_{\\text{in}}$ increases ($+g_{m1}$ term).\n  * **$M_2$** acts as a common-source device, trying to pull $V_{\\text{out}}$ **DOWN** as $V_{\\text{in}}$ increases ($-g_{m2}$ term).\n* **Gain Polarity:**\n  * If $g_{m1} > g_{m2}$: The circuit is **non-inverting** ($A_v > 0$).\n  * If $g_{m1} < g_{m2}$: The circuit is **inverting** ($A_v < 0$).\n  * If $g_{m1} = g_{m2}$: The gain is **zero** ($A_v = 0$).\n\n---\n\n### 6. Impedances\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  $$R_{\\text{in}} \\approx \\infty \\quad \\text{(at DC / low frequencies)}$$\n* **Output Impedance ($R_{\\text{out}}$):**\n  $$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1} + g_{ds1} + g_{ds2}} \\approx \\frac{1}{g_{m1} + g_{ds2}}$$\n  The output impedance is low due to the source-follower action of $M_1$ in parallel with the channel conductance $g_{ds2}$ of $M_2$.",
        "format": "markdown",
        "sha256": "df6472d410e0bb083d7ad3b12037a16c473ffc16ec0b3daaf21c9374958e1c49"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies both devices as NMOS and recognizes the upper source-follower and lower pull-down actions. But it makes the gain polarity conditional and says the stage could be inverting; current balance gives a positive gain below one, so it misses the essential non-inverting-attenuator behavior.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 5181,
        "total_tokens": 6281,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3314,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 5181,
        "total_tokens": 6281,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3314,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Identification and Overview\n* **Circuit Topology:** **Common-Source (CS) Amplifier with a Diode-Connected PMOS Load**\n* **Driver Device ($M_1$):** N-channel MOSFET (NMOS), with input applied to its gate and source grounded.\n* **Load Device ($M_2$):** P-channel MOSFET (PMOS), configured as a diode-connected load (gate tied to drain, and source tied to $V_{DD}$).\n\n---\n\n### 2. Large-Signal (DC) Analysis\nSince the gate of $M_2$ is shorted to its drain ($V_{G2} = V_{D2} = V_{\\text{out}}$), $V_{DS2} = V_{GS2}$. Because $|V_{DS2}| = |V_{GS2}| > |V_{GS2}| - |V_{TH2}|$, **$M_2$ is always in the saturation region** whenever current flows through it.\n\nAssuming both transistors operate in saturation and neglecting channel-length modulation ($\\lambda = 0$):\n\n1. **Drain Current Equations:**\n   $$I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH1})^2$$\n   $$I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{out}} - |V_{TH2}|)^2$$\n\n2. **Transfer Characteristic:**\n   Since $I_{D1} = I_{D2}$:\n   $$\\sqrt{\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1} (V_{\\text{in}} - V_{TH1}) = \\sqrt{\\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2} (V_{DD} - V_{\\text{out}} - |V_{TH2}|)$$\n\n   Solving for $V_{\\text{out}}$:\n   $$V_{\\text{out}} = V_{DD} - |V_{TH2}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} (V_{\\text{in}} - V_{TH1})$$\n\n> **Key Feature (Linearity):** In an n-well process, the bulk (substrate) of $M_2$ can be connected directly to its source ($V_{DD}$), completely eliminating the body effect ($V_{BS2} = 0 \\implies V_{TH2} = \\text{constant}$). Since $M_1$'s source is tied to ground, $V_{TH1}$ is also constant. Therefore, **the large-signal transfer characteristic is highly linear**.\n\n---\n\n### 3. Small-Signal Analysis and Voltage Gain\n\n#### A. Transconductances and Output Resistance:\n* **Transconductance of $M_1$:** $g_{m1} = \\sqrt{2\\mu_n C_{ox} (W/L)_1 I_D}$\n* **Transconductance of $M_2$:** $g_{m2} = \\sqrt{2\\mu_p C_{ox} (W/L)_2 I_D}$\n* **Small-signal impedance of diode-connected $M_2$:**\n  $$R_{L} \\approx \\frac{1}{g_{m2}} \\parallel r_{o2}$$\n\n#### B. Total Output Resistance ($R_{\\text{out}}$):\n$$R_{\\text{out}} = r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}} \\approx \\frac{1}{g_{m2}}$$\n\n#### C. Small-Signal Voltage Gain ($A_v$):\n$$A_v = -g_{m1} R_{\\text{out}} = -g_{m1} \\left(\\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2}\\right)$$\n\nNeglecting output channel resistances ($r_{o1}, r_{o2} \\gg 1/g_{m2}$):\n$$A_v \\approx -\\frac{g_{m1}}{g_{m2}} = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n---\n\n### 4. Output Voltage Swing\nTo keep both transistors in saturation (for proper amplifier operation):\n* **Lower limit ($M_1$ in saturation):**\n  $$V_{\\text{out,min}} \\ge V_{\\text{in}} - V_{TH1} = V_{DS1,\\text{sat}}$$\n* **Upper limit ($M_2$ stays on and active):**\n  $$V_{\\text{out,max}} \\le V_{DD} - |V_{TH2}|$$\n\n---\n\n### 5. Summary of Characteristics\n\n| Parameter | Expression / Property |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\approx -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$ |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ (at low frequencies, looking into the gate of $M_1$) |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m2}}$ (relatively low) |\n| **Body Effect** | Can be eliminated by tying the bulk of $M_2$ to $V_{DD}$ |\n\n### Pros & Cons\n* **Pros:**\n  * **High Linearity:** The voltage gain depends only on device geometries and carrier mobilities, making it independent of bias current and signal levels.\n  * **No External Biasing Required for Load:** $M_2$ self-biases through its diode connection.\n* **Cons:**\n  * **Low Voltage Gain:** Because the gain is proportional to $\\sqrt{(W/L)_1 / (W/L)_2}$, achieving a large gain requires an excessively large aspect ratio ratio, which consumes significant silicon area.\n  * **Reduced Output Headroom:** The maximum output voltage is limited to $V_{DD} - |V_{TH2}|$.",
        "format": "markdown",
        "sha256": "477a146c9eaa8750824ca39bf8f6605dffec3d55cf87b2ab8982c647406f7cf7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain both with consistent output-resistance terms and in the ideal −gm1/gm2 form.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2947,
        "total_tokens": 4047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1524,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2947,
        "total_tokens": 4047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1524,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Topology Overview\n\nThe given circuit is a **Common-Source (CS) Amplifier with a Diode-Connected PMOS Load**.\n\n* **$M_1$ (NMOS)** acts as the **driver/input transistor**:\n  * Gate is connected to the input signal $V_{\\text{in}}$.\n  * Source is grounded ($0\\text{ V}$).\n  * Drain provides the output $V_{\\text{out}}$.\n* **$M_2$ (PMOS)** acts as the **active diode-connected load**:\n  * Source is connected to the positive supply $V_{DD}$.\n  * Gate is tied to its own drain ($V_{GD2} = 0\\text{ V}$), forcing it to operate in the **saturation region** whenever it conducts.\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nAssuming channel-length modulation ($\\lambda = 0$) and no body effect ($V_{SB} = 0$):\n\n1. **Cut-off Region ($V_{\\text{in}} < V_{TH1}$):**\n   * $M_1$ is OFF ($I_{D1} = 0$).\n   * No current flows through $M_2$, meaning $|V_{GS2}| \\approx |V_{TH2}|$.\n   * $$V_{\\text{out}} = V_{DD} - |V_{TH2}|$$\n\n2. **Both Transistors in Saturation ($V_{TH1} < V_{\\text{in}}$ and $V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH1}$):**\n   * Since $M_2$ is diode-connected, it is always in saturation when conducting because $|V_{DS2}| = |V_{GS2}| > |V_{GS2}| - |V_{TH2}|$.\n   * Equating the drain currents ($I_{D1} = I_{D2}$):\n     $$I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH1})^2$$\n     $$I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{out}} - |V_{TH2}|)^2$$\n\n   * Solving for $V_{\\text{out}}$:\n     $$V_{\\text{out}} = V_{DD} - |V_{TH2}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} (V_{\\text{in}} - V_{TH1})$$\n\n   > **Note on Linearity:** The relationship between $V_{\\text{out}}$ and $V_{\\text{in}}$ is **linear** in this region because the gain depends only on device geometries and mobility ratios, not on the bias current.\n\n3. **Triode Region for $M_1$ ($V_{\\text{out}} < V_{\\text{in}} - V_{TH1}$):**\n   * As $V_{\\text{in}}$ becomes sufficiently high, $V_{\\text{out}}$ drops low enough that $M_1$ enters the triode (linear) region, causing the gain to drop sharply.\n\n---\n\n### 3. Small-Signal Analysis\n\n#### a. Small-Signal Output Resistance ($R_{\\text{out}}$)\n* The small-signal impedance looking into the drain of $M_2$ (diode-connected) is:\n  $$r_{o2} \\parallel \\frac{1}{g_{m2}} \\approx \\frac{1}{g_{m2}}$$\n* Including the output resistance of $M_1$ ($r_{o1}$):\n  $$R_{\\text{out}} = \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m2}}$$\n\n#### b. Voltage Gain ($A_v$)\n* **Ideal Case ($\\lambda = 0$ / ignoring channel-length modulation):**\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m1} R_{\\text{out}} = -\\frac{g_{m1}}{g_{m2}}$$\n  \n  Substituting $g_m = \\sqrt{2 \\mu C_{ox} (W/L) I_D}$:\n  $$A_v = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n* **Practical Case ($\\lambda \\neq 0$):**\n  $$A_v = -g_{m1} \\left( \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2} \\right) = -\\frac{g_{m1}}{g_{m2} + g_{o1} + g_{o2}}$$\n\n---\n\n### 4. Output Voltage Swing\n\n* **Maximum Output Voltage:**\n  $$V_{\\text{out,max}} = V_{DD} - |V_{TH2}|$$\n  *(Cannot reach $V_{DD}$ due to the threshold drop across $M_2$)*\n* **Minimum Output Voltage (to keep $M_1$ in saturation):**\n  $$V_{\\text{out,min}} = V_{DS1,\\text{sat}} = V_{\\text{in}} - V_{TH1}$$\n\n---\n\n### 5. Summary of Key Characteristics\n\n| Parameter | Value / Expression | Comments |\n| :--- | :--- | :--- |\n| **Circuit Type** | Inverting Amplifier | $180^\\circ$ phase shift |\n| **Voltage Gain ($A_v$)** | $-\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$ | Relatively low, but highly linear |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m2}}$ | Low output impedance |\n| **Bandwidth** | Relatively Wide | Due to low load resistance ($1/g_{m2}$) at the output node |\n| **Main Advantage** | No passive resistor needed; excellent linearity | Easy to fabricate in standard CMOS processes |\n| **Main Drawback** | Limited gain and reduced output swing ($V_{DD} - |V_{TH2}|$) | Trade-off between gain and device area |",
        "format": "markdown",
        "sha256": "19ac6c3cd88d947415e6c9be38aca323ab33330c8c15b685da549bc3f41beb41"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including channel-length modulation consistently for both devices. The additional large-signal discussion is not required and does not change the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2851,
        "total_tokens": 3951,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2851,
        "total_tokens": 3951,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Common-Source (CS) Amplifier with a Diode-Connected PMOS Load**. \n\nBelow is a detailed analysis of its operation, DC behavior, small-signal gain, and key characteristics.\n\n---\n\n### 1. Circuit Identification and Roles\n* **$M_1$ (NMOS):** Functions as the input driver transistor (transconductance element) converting the input voltage $V_{\\text{in}}$ into a small-signal drain current.\n* **$M_2$ (PMOS):** Configured as a **diode-connected load** by tying its gate to its drain ($V_{G2} = V_{D2} = V_{\\text{out}}$). Since $|V_{DS2}| = |V_{GS2}| > |V_{GS2}| - |V_{THP}|$, $M_2$ is **always in the saturation region** whenever it is conducting current.\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nAssuming both transistors operate in the saturation region and channel-length modulation ($\\lambda = 0$) is neglected:\n\n1. **Drain currents:**\n   $$I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{THN})^2$$\n   $$I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{out}} - |V_{THP}|)^2$$\n\n2. **Equating $I_{D1} = I_{D2}$:**\n   $$\\sqrt{\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1} (V_{\\text{in}} - V_{THN}) = \\sqrt{\\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2} (V_{DD} - V_{\\text{out}} - |V_{THP}|)$$\n\n3. **Output Voltage ($V_{\\text{out}}$):**\n   $$V_{\\text{out}} = V_{DD} - |V_{THP}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} (V_{\\text{in}} - V_{THN})$$\n\n* **Linearity:** Because the square-law terms cancel out, the large-signal transfer characteristic ($V_{\\text{out}}$ vs. $V_{\\text{in}}$) is **linear** to a first-order approximation when both devices are in saturation.\n\n---\n\n### 3. Small-Signal Analysis & Voltage Gain\n\n#### A. Small-Signal Parameters\n* Transconductance of $M_1$: $g_{m1} = \\sqrt{2\\mu_n C_{ox}(W/L)_1 I_D}$\n* Transconductance of $M_2$: $g_{m2} = \\sqrt{2\\mu_p C_{ox}(W/L)_2 I_D}$\n* Output resistances: $r_{o1}$ and $r_{o2}$\n\n#### B. Output Resistance ($R_{\\text{out}}$)\nThe impedance looking into the drain of diode-connected $M_2$ is $\\frac{1}{g_{m2}} \\parallel r_{o2}$. Thus, the total small-signal output resistance is:\n$$R_{\\text{out}} = \\frac{1}{g_{m2}} \\parallel r_{o2} \\parallel r_{o1} \\approx \\frac{1}{g_{m2}} \\quad (\\text{since } \\frac{1}{g_{m2}} \\ll r_{o1}, r_{o2})$$\n\n*(Note: Since $M_2$ is a PMOS device fabricated inside an n-well, its bulk can be tied to $V_{DD}$ ($V_{SB2} = 0$), which completely **eliminates the body effect** ($g_{mb2} = 0$).)*\n\n#### C. Voltage Gain ($A_v$)\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m1} R_{\\text{out}} = -g_{m1} \\left( \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2} \\right)$$\n\nNeglecting channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$):\n$$A_v \\approx -\\frac{g_{m1}}{g_{m2}} = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n---\n\n### 4. Output Voltage Swing\nTo keep both transistors operating properly:\n* **Maximum Output Voltage:**\n  $$V_{\\text{out,max}} \\approx V_{DD} - |V_{THP}|$$\n  *(For $V_{\\text{out}} > V_{DD} - |V_{THP}|$, $M_2$ cuts off).*\n* **Minimum Output Voltage:**\n  $$V_{\\text{out,min}} = V_{\\text{in}} - V_{THN} = V_{ov1}$$\n  *(To keep $M_1$ in the saturation region).*\n\n---\n\n### 5. Summary of Key Pros and Cons\n\n| **Advantages** | **Disadvantages / Trade-offs** |\n| :--- | :--- |\n| **No Body Effect:** $M_2$'s source and body are both at $V_{DD}$, maintaining a constant threshold voltage. | **Low Voltage Gain:** Because $A_v \\propto \\sqrt{(W/L)_1 / (W/L)_2}$, achieving high gain requires impractical transistor dimension ratios. |\n| **High Linearity:** Gain is primarily determined by geometric ratios $(W/L)$ and material constants, making it independent of bias current. | **Limited Output Swing:** The output cannot reach $V_{DD}$ while conducting due to the $|V_{THP}|$ drop across $M_2$. |\n| **Wide Bandwidth:** The relatively low output impedance ($1/g_{m2}$) pushes the output pole to a higher frequency. | |",
        "format": "markdown",
        "sha256": "dce387e49d328a9c347ad2b2f4525902d76736fd55dd08508efbc5eaae475763"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation treated consistently for both devices.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 3272,
        "total_tokens": 4372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 3272,
        "total_tokens": 4372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed analysis of the given circuit.\n\n---\n\n### **1. Circuit Identification and Overview**\n* **Circuit Topology:** PMOS Common-Source (CS) Amplifier with a Diode-Connected PMOS Load.\n* **Transistors:**\n  * **$M_2$ (Input / Driver Device):** A PMOS transistor configured as a common-source stage with its source tied to $V_{DD}$ and input signal $V_{\\text{in}}$ applied to its gate.\n  * **$M_1$ (Active Load Device):** A PMOS transistor whose gate and drain are both tied to ground ($V_{G1} = V_{D1} = 0\\text{ V}$), making $V_{GD1} = 0\\text{ V}$. Thus, $M_1$ is **diode-connected** and acts as an active resistive load connected between $V_{\\text{out}}$ and ground.\n\n---\n\n### **2. Large-Signal (DC) Transfer Characteristics**\n\nAssuming both transistors operate in the **saturation region** and neglecting channel-length modulation ($\\lambda = 0$) and body effect:\n\n1. **Cutoff Region ($V_{\\text{in}} > V_{DD} - |V_{TH2}|$):**\n   * Transistor $M_2$ is OFF because $|V_{GS2}| = V_{DD} - V_{\\text{in}} < |V_{TH2}|$.\n   * No current flows through the circuit ($I_{D1} = I_{D2} = 0$).\n   * $V_{\\text{out}}$ drops to $0\\text{ V}$ (or $|V_{TH1}|$ in ideal static conditions where $M_1$ turns off).\n\n2. **Saturation Region ($M_1$ and $M_2$ both in Saturation):**\n   * The drain current for $M_2$ is:\n     $$I_{D2} = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{TH2}|)^2$$\n   * For the diode-connected load $M_1$, $V_{SG1} = V_{\\text{out}} - 0 = V_{\\text{out}}$, so:\n     $$I_{D1} = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{\\text{out}} - |V_{TH1}|)^2$$\n   * Equating $I_{D1} = I_{D2}$:\n     $$\\sqrt{\\left(\\frac{W}{L}\\right)_1}(V_{\\text{out}} - |V_{TH1}|) = \\sqrt{\\left(\\frac{W}{L}\\right)_2}(V_{DD} - V_{\\text{in}} - |V_{TH2}|)$$\n   * Solving for $V_{\\text{out}}$:\n     $$V_{\\text{out}} = \\sqrt{\\frac{(W/L)_2}{(W/L)_1}} (V_{DD} - V_{\\text{in}} - |V_{TH2}|) + |V_{TH1}|$$\n\n3. **Triode Region for $M_2$:**\n   * As $V_{\\text{in}}$ decreases further, $V_{\\text{out}}$ increases until $V_{SD2} < V_{SG2} - |V_{TH2}|$ (i.e., $V_{\\text{out}} > V_{\\text{in}} + |V_{TH2}|$), causing $M_2$ to enter the triode region and the gain to drop significantly.\n\n---\n\n### **3. Small-Signal Analysis**\n\n#### **A. Small-Signal Parameters**\n* Transconductance of $M_2$: \n  $$g_{m2} = \\sqrt{2\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 I_D}$$\n* Transconductance of $M_1$: \n  $$g_{m1} = \\sqrt{2\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 I_D}$$\n\n#### **B. Small-Signal Voltage Gain ($A_v$)**\n* The small-signal output resistance of the diode-connected transistor $M_1$ looking into its source is:\n  $$r_{o,M1} \\approx \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1}$$\n* The overall small-signal output impedance is:\n  $$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2}$$\n* The small-signal voltage gain is given by:\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m2} R_{\\text{out}} = -g_{m2} \\left( \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\right)$$\n\n* **Ideal Case** (neglecting channel-length modulation $\\lambda = 0$ and body effect $g_{mb1} = 0$):\n  $$A_v = -\\frac{g_{m2}}{g_{m1}} = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n---\n\n### **4. Impact of Non-Idealities**\n\n1. **Body Effect:**\n   * In a standard n-well CMOS process, if the bulk of $M_1$ is connected to $V_{DD}$ rather than its source ($V_{\\text{out}}$), $V_{SB1} = V_{\\text{out}} - V_{DD} \\neq 0$, introducing body effect ($g_{mb1} = \\eta_1 g_{m1}$).\n   * The gain is modified to:\n     $$A_v \\approx -\\frac{g_{m2}}{g_{m1} + g_{mb1}} = -\\frac{1}{1 + \\eta_1} \\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n2. **Channel-Length Modulation ($\\lambda > 0$):**\n   * Output resistances $r_{o1} = \\frac{1}{\\lambda_1 I_D}$ and $r_{o2} = \\frac{1}{\\lambda_2 I_D}$ appear in parallel with $\\frac{1}{g_{m1}}$, slightly reducing the magnitude of the gain.\n\n---\n\n### **5. Key Characteristics & Summary**\n\n| Metric | Expression / Value | Notes |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$ | Determined by geometry ratio; relatively independent of bias current and temperature. |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ | Looking into the gate of $M_2$ at low frequencies. |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m1}}$ | Low output impedance yields wide bandwidth at the cost of lower gain. |\n| **Linearity** | High | First-order linear relationship between $V_{\\text{in}}$ and $V_{\\text{out}}$ when both are in saturation. |",
        "format": "markdown",
        "sha256": "04ab9a4a07520c33748fbd4daf75d8c346168e5895edbd12d3f1ce24f8f17ba4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies both devices as PMOS, correctly treats M2 as the common-source input device and M1 as a diode-connected PMOS load, and gives the expected gm/gm gain. Minor large-signal imprecision does not override the golden solution’s full-credit rule.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 4484,
        "total_tokens": 5565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2823,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 4484,
        "total_tokens": 5565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2823,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Topology and Classification\n* **Transistor Types:** Both $M_1$ and $M_2$ are **PMOS transistors** (indicated by the arrows pointing inward toward the channel at their source terminals).\n* **Configuration:** \n  * **$M_2$ (Input Transistor):** Configured as a **Common-Source (CS)** amplifier. Its source is tied to $V_{DD}$, the input signal $V_{\\text{in}}$ is applied to its gate, and the output $V_{\\text{out}}$ is taken at its drain.\n  * **$M_1$ (Load Transistor):** Acts as a **diode-connected PMOS load**. Its gate and drain are both tied to ground ($V_{G1} = V_{D1} = 0$), and its source is connected to $V_{\\text{out}}$.\n* **Circuit Name:** **PMOS Common-Source Amplifier with Diode-Connected PMOS Load**.\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\n#### Operating Conditions:\n* **$M_2$:** Turns ON when $V_{\\text{in}} \\le V_{DD} - |V_{TH2}|$. In saturation, its drain current is:\n  $$I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{TH2}|)^2$$\n\n* **$M_1$:** Since its gate and drain are connected to the lowest potential (ground, $0\\text{ V}$), and its source is at $V_{\\text{out}}$:\n  $$V_{SG1} = V_{\\text{out}} - 0 = V_{\\text{out}}$$\n  $$V_{SD1} = V_{\\text{out}} - 0 = V_{\\text{out}}$$\n  Since $V_{SD1} = V_{SG1} > V_{SG1} - |V_{TH1}|$, **$M_1$ is always in saturation** when it conducts current. Its current is given by:\n  $$I_{D1} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{out}} - |V_{TH1}|)^2$$\n\n#### Input-Output Transfer Relationship:\nEquating the currents $I_{D1} = I_{D2}$ (neglecting channel-length modulation $\\lambda = 0$):\n$$\\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{TH2}|)^2 = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{out}} - |V_{TH1}|)^2$$\n\nSolving for $V_{\\text{out}}$:\n$$V_{\\text{out}} = \\sqrt{\\frac{(W/L)_2}{(W/L)_1}} \\left(V_{DD} - V_{\\text{in}} - |V_{TH2}|\\right) + |V_{TH1}|$$\n\n* As $V_{\\text{in}}$ decreases, $V_{SG2}$ increases, causing more current to flow and pulling $V_{\\text{out}}$ **higher** (inverting amplifier behavior).\n\n---\n\n### 3. Small-Signal AC Analysis\n\n#### 1. Small-Signal Parameters:\n* Transconductance of $M_2$: $g_{m2} = \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{TH2}|)$\n* Transconductance of $M_1$: $g_{m1} = \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{out}} - |V_{TH1}|)$\n* Transistor output impedances: $r_{O1}$ and $r_{O2}$\n\n#### 2. Output Impedance ($R_{\\text{out}}$):\nLooking into the source of the diode-connected transistor $M_1$, the impedance is approximately $\\frac{1}{g_{m1}}$. The total small-signal output resistance is:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{O1} \\parallel r_{O2} \\approx \\frac{1}{g_{m1}}$$\n\n#### 3. Voltage Gain ($A_v$):\nThe small-signal voltage gain is:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m2} R_{\\text{out}} = -g_{m2} \\left[ \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{O1} \\parallel r_{O2} \\right]$$\n\nNeglecting channel-length modulation ($\\lambda \\approx 0$) and body effect ($g_{mb1} \\approx 0$):\n$$A_v = -\\frac{g_{m2}}{g_{m1}} = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n---\n\n### 4. Influence of Non-Idealities\n\n1. **Body Effect ($g_{mb1}$):**\n   * If the bulk (N-well) of $M_1$ is connected to $V_{DD}$, the source-to-bulk voltage $V_{SB1} = V_{\\text{out}} - V_{DD} \\neq 0$ varies with $V_{\\text{out}}$, introducing a body effect transconductance $g_{mb1} = \\eta g_{m1}$.\n   * The gain is modified to:\n     $$A_v = -\\frac{g_{m2}}{g_{m1} + g_{mb1}} = -\\frac{1}{1 + \\eta} \\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n2. **Channel-Length Modulation ($\\lambda > 0$):**\n   * Including finite output resistances $r_{O1}$ and $r_{O2}$ slightly decreases the effective load resistance, marginally reducing the gain.\n\n---\n\n### 5. Summary of Circuit Properties\n\n| Parameter | Value / Expression | Notes |\n| :--- | :--- | :--- |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ | Looking into the gate of $M_2$ at low frequencies |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m1}}$ | Low output impedance due to diode-connected load |\n| **Voltage Gain ($A_v$)** | $-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$ | Determined by geometry ratio; independent of bias current (to first order) |\n| **Bandwidth** | Relatively High | Due to the low $R_{\\text{out}} \\approx 1/g_{m1}$ at the output node |",
        "format": "markdown",
        "sha256": "2cb3e91d39a47779c71e8f0b1e76e9916c4abe848bd7f0a8e61d1440d9836e5b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain grounded. It gives the expected gm/gm gain, Av ≈ −gm2/gm1; secondary modeling details do not undermine the essential analysis.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 4481,
        "total_tokens": 5562,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2862,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 4481,
        "total_tokens": 5562,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2862,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit covering its topology, large-signal behavior, small-signal parameters, and key design trade-offs.\n\n---\n\n### 1. Circuit Topology and Identification\n* **Input Device ($M_2$):** A **PMOS** transistor operating as a **Common-Source (CS)** amplifier. Its source is connected to $V_{DD}$, gate to the input signal $V_{\\text{in}}$, and drain to the output node $V_{\\text{out}}$.\n* **Load Device ($M_1$):** A **diode-connected PMOS** transistor acting as the active load. Its source is at $V_{\\text{out}}$, while both its gate and drain are tied to ground ($0\\text{ V}$).\n\n---\n\n### 2. Large-Signal (DC) Operation and Transfer Characteristics\n\n#### **A. Operating Regions of the Transistors**\n1. **$M_1$ (Diode-Connected PMOS):**\n   * Gate-Source Voltage: $V_{SG1} = V_{\\text{out}} - 0 = V_{\\text{out}}$\n   * Source-Drain Voltage: $V_{SD1} = V_{\\text{out}} - 0 = V_{\\text{out}}$\n   * For $M_1$ to conduct, $V_{\\text{out}} \\ge |V_{TH1}|$.\n   * Since $V_{SD1} = V_{SG1} > V_{SG1} - |V_{TH1}|$, **$M_1$ is always in saturation** whenever it is on.\n\n2. **$M_2$ (Common-Source PMOS):**\n   * Gate-Source Voltage: $V_{SG2} = V_{DD} - V_{\\text{in}}$\n   * It turns on when $V_{\\text{in}} \\le V_{DD} - |V_{TH2}|$.\n   * It operates in **saturation** if $V_{SD2} \\ge V_{SG2} - |V_{TH2}| \\implies V_{\\text{out}} \\le V_{\\text{in}} + |V_{TH2}|$.\n\n---\n\n#### **B. Voltage Transfer Characteristic (VTC)**\n\n* **Region 1: $M_2$ is OFF ($V_{\\text{in}} > V_{DD} - |V_{TH2}|$):**\n  * Current $I_{D2} = 0 \\implies I_{D1} = 0$.\n  * The output settles at:\n    $$V_{\\text{out}} = |V_{TH1}|$$\n\n* **Region 2: Both $M_1$ and $M_2$ in Saturation ($V_{\\text{in}} \\le V_{DD} - |V_{TH2}|$ and $V_{\\text{out}} \\le V_{\\text{in}} + |V_{TH2}|$):**\n  Equating the drain currents (neglecting channel-length modulation $\\lambda$ and body effect):\n  $$I_{D1} = I_{D2}$$\n  $$\\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{\\text{out}} - |V_{TH1}|)^2 = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{TH2}|)^2$$\n\n  Solving for $V_{\\text{out}}$:\n  $$V_{\\text{out}} = \\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\left(V_{DD} - V_{\\text{in}} - |V_{TH2}|\\right) + |V_{TH1}|$$\n\n* **Region 3: $M_2$ enters Triode ($V_{\\text{out}} > V_{\\text{in}} + |V_{TH2}|$):**\n  * As $V_{\\text{in}} \\to 0$, $M_2$ goes into the linear (triode) region and $V_{\\text{out}}$ approaches $V_{DD}$.\n\n---\n\n### 3. Small-Signal Analysis\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\nThe small-signal resistance looking into the source of the diode-connected transistor $M_1$ is:\n$$R_{\\text{load}} \\approx \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1}$$\n\n1. **Ideal Case (Neglecting $\\lambda$ and Body Effect):**\n   $$A_v = -g_{m2} \\cdot \\left(\\frac{1}{g_{m1}}\\right) = -\\frac{g_{m2}}{g_{m1}} = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n2. **Including Body Effect ($g_{mb1}$ on $M_1$, if bulk is tied to $V_{DD}$):**\n   $$A_v = -\\frac{g_{m2}}{g_{m1} + g_{mb1}} = -\\frac{1}{1 + \\eta}\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n   *(where $\\eta = g_{mb1}/g_{m1}$)*\n\n3. **Including Channel-Length Modulation ($r_{o1}, r_{o2}$):**\n   $$A_v = -g_{m2} \\left( \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\right)$$\n\n---\n\n#### **B. Input and Output Impedance**\n* **Input Impedance ($R_{\\text{in}}$):**\n  $$R_{\\text{in}} = \\infty \\quad \\text{(at low frequencies)}$$\n* **Output Impedance ($R_{\\text{out}}$):**\n  $$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m1}}$$\n\n---\n\n### 4. Output Voltage Swing\n\n* **Minimum Output Voltage:**\n  $$V_{\\text{out,min}} = |V_{TH1}|$$\n  *(Below this voltage, $M_1$ turns off).*\n\n* **Maximum Output Voltage (to keep $M_2$ in saturation):**\n  $$V_{\\text{out,max}} = V_{\\text{in}} + |V_{TH2}|$$\n\n---\n\n### 5. Summary of Circuit Characteristics\n\n| Parameter | Value / Expression | Notes |\n| :--- | :--- | :--- |\n| **Circuit Type** | PMOS Common-Source with Diode Load | Inverting amplifier |\n| **Ideal Voltage Gain ($A_v$)** | $-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$ | Highly linear; depends only on aspect ratio |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m1}}$ | Low output impedance |\n| **Main Advantage** | High linearity | Gain is independent of bias current and input level to a first order |\n| **Main Drawback** | Relatively low voltage gain | Increasing gain requires $(W/L)_2 \\gg (W/L)_1$, costing significant chip area |",
        "format": "markdown",
        "sha256": "07fd8fd96dfdd99b45fba78460b0c5f61d2a63b69cced7c219f78dd885a2e4e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain grounded. It also gives the essential gm/gm gain, Av ≈ −gm2/gm1; ancillary operating-range details do not displace this correct analysis.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 4800,
        "total_tokens": 5881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3153,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 4800,
        "total_tokens": 5881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3153,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{\\text{out}}$ of the PMOS cascode circuit, we perform a small-signal analysis.\n\n---\n\n### 1. Circuit Identification\n* Transistor **$M_2$** is a PMOS current source with its gate at an AC ground ($V_{b2}$) and source at $V_{DD}$ (AC ground).\n* Transistor **$M_1$** is a PMOS cascode transistor with its gate at an AC ground ($V_{b1}$).\n* Node $X$ is the drain of $M_2$ and the source of $M_1$.\n\n---\n\n### 2. Impedance at Node $X$\nLooking up into the drain of $M_2$:\n* Since $v_{g2} = 0$, $v_{s2} = 0$, and $v_{b2} = 0$, we have $v_{gs2} = 0$ and $v_{bs2} = 0$.\n* The dependent current sources of $M_2$ produce zero current.\n* Therefore, the resistance looking into node $X$ is simply the channel-length modulation resistance of $M_2$:\n$$R_X = r_{O2}$$\n\n---\n\n### 3. Output Resistance $R_{\\text{out}}$ Calculation\nTransistor $M_1$ acts as a common-gate stage with source degeneration resistance $R_S = r_{O2}$.\n\nApplying a test voltage $v_t$ at the output (drain of $M_1$) and measuring the resulting test current $i_t$:\n1. The current $i_t$ flows through the source degeneration resistance $r_{O2}$, producing a small-signal voltage at node $X$:\n   $$v_X = i_t r_{O2}$$\n\n2. The small-signal voltages for $M_1$ are:\n   $$v_{sg1} = v_X - 0 = v_X = i_t r_{O2}$$\n   $$v_{sb1} = v_X - 0 = v_X = i_t r_{O2} \\quad \\text{(assuming the body is tied to } V_{DD}\\text{)}$$\n\n3. Applying Kirchhoff's Current Law (KCL) at the output node:\n   $$i_t = g_{m1} v_{sg1} + g_{mb1} v_{sb1} + \\frac{v_t - v_X}{r_{O1}}$$\n\n4. Substituting $v_X = i_t r_{O2}$:\n   $$i_t = (g_{m1} + g_{mb1}) i_t r_{O2} + \\frac{v_t - i_t r_{O2}}{r_{O1}}$$\n\n5. Multiplying by $r_{O1}$ and rearranging terms:\n   $$i_t r_{O1} = (g_{m1} + g_{mb1}) r_{O1} r_{O2} i_t + v_t - i_t r_{O2}$$\n   $$v_t = i_t \\left[ r_{O1} + r_{O2} + (g_{m1} + g_{mb1}) r_{O1} r_{O2} \\right]$$\n\n---\n\n### 4. Final Result\n\n#### **Exact Expression (with body effect):**\n$$R_{\\text{out}} = \\left[ 1 + (g_{m1} + g_{mb1}) r_{O1} \\right] r_{O2} + r_{O1} = r_{O1} + r_{O2} + (g_{m1} + g_{mb1}) r_{O1} r_{O2}$$\n\n#### **If body effect is neglected ($g_{mb1} = 0$):**\n$$R_{\\text{out}} = (1 + g_{m1} r_{O1}) r_{O2} + r_{O1}$$\n\n#### **Standard Approximation:**\nSince $(g_{m1} + g_{mb1}) r_{O1} r_{O2} \\gg r_{O1} + r_{O2}$:\n$$R_{\\text{out}} \\approx (g_{m1} + g_{mb1}) r_{O1} r_{O2} \\approx g_{m1} r_{O1} r_{O2}$$",
        "format": "markdown",
        "sha256": "a8297dc88148db2f0944175bb0e0ce4947e7507c06d83138599125762ec18c01"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, assigns M1 the cascode role, and gives the full output-resistance expression and valid approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 3363,
        "total_tokens": 4471,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2384,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 3363,
        "total_tokens": 4471,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2384,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance **$R_{\\text{out}}$** of the given circuit, we can analyze the small-signal model of the cascode configuration.\n\n---\n\n### **1. Circuit Identification**\n* The circuit is a **PMOS cascode structure**:\n  * **$M_2$** has its source connected to $V_{DD}$ (AC ground) and its gate biased at $V_{b2}$ (AC ground). Looking into the drain of $M_2$ at node $X$, the resistance is:\n    $$R_X = r_{O2}$$\n  * **$M_1$** acts as a common-gate cascode transistor whose source is degenerated by the output resistance of $M_2$ ($R_S = r_{O2}$), and its gate is at AC ground ($V_{b1}$).\n\n---\n\n### **2. Derivation of $R_{\\text{out}}$**\n\nTo calculate $R_{\\text{out}}$, we apply a test voltage $v_t$ at the output node (drain of $M_1$) and determine the resulting test current $i_t$:\n\n1. Since all gate terminals and $V_{DD}$ are at AC ground:\n   $$v_X = i_t r_{O2}$$\n2. The small-signal gate-source and bulk-source voltages of $M_1$ are:\n   $$v_{gs1} = -v_X = -i_t r_{O2}$$\n   $$v_{bs1} = -v_X = -i_t r_{O2} \\quad \\text{(assuming bulk is tied to } V_{DD}\\text{)}$$\n3. The current through the output resistance $r_{O1}$ is:\n   $$i_{rO1} = i_t - g_{m1}v_{gs1} - g_{mb1}v_{bs1} = i_t + (g_{m1} + g_{mb1})i_t r_{O2}$$\n4. Writing the KVL from the output node to ground:\n   $$v_t = v_X + i_{rO1}r_{O1} = i_t r_{O2} + \\left[i_t + (g_{m1} + g_{mb1})i_t r_{O2}\\right]r_{O1}$$\n5. Solving for $R_{\\text{out}} = \\frac{v_t}{i_t}$:\n   $$R_{\\text{out}} = r_{O1} + r_{O2} + (g_{m1} + g_{mb1}) r_{O1} r_{O2}$$\n   or factored as:\n   $$R_{\\text{out}} = \\left[1 + (g_{m1} + g_{mb1})r_{O1}\\right] r_{O2} + r_{O1}$$\n\n---\n\n### **3. Final Expressions**\n\n* **Exact formula (including body effect):**\n  $$R_{\\text{out}} = \\left[1 + (g_{m1} + g_{mb1})r_{O1}\\right] r_{O2} + r_{O1}$$\n\n* **If body effect is neglected ($g_{mb1} = 0$ or bulk tied to source):**\n  $$R_{\\text{out}} = (1 + g_{m1}r_{O1})r_{O2} + r_{O1}$$\n\n* **Approximate formula (since $(g_{m1} + g_{mb1})r_{O1}r_{O2} \\gg r_{O1} + r_{O2}$):**\n  $$R_{\\text{out}} \\approx (g_{m1} + g_{mb1}) r_{O1} r_{O2} \\approx g_{m1} r_{O1} r_{O2}$$",
        "format": "markdown",
        "sha256": "d34ff4f6cc140e935ae21655e34703a7a78cc79a278fb5b053293726acd717f7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the cascode device and gives the full Rout expression and its standard approximation. Minor body-effect wording does not affect the result.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 2805,
        "total_tokens": 3913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1943,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 2805,
        "total_tokens": 3913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1943,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{\\text{out}}$ of the given PMOS cascode circuit, we perform a small-signal analysis.\n\n---\n\n### **1. Circuit Identification**\n* Both $M_1$ and $M_2$ are PMOS transistors operating in saturation.\n* The gate of $M_2$ is tied to a DC bias $V_{b2}$ (AC ground), and its source is tied to $V_{DD}$ (AC ground). \n  * The resistance looking into the drain of $M_2$ (node $X$) is:\n    $$R_X = r_{O2}$$\n* Transistor $M_1$ acts as a cascode device with its source degenerated by the output impedance of $M_2$ ($r_{O2}$) and its gate connected to DC bias $V_{b1}$ (AC ground).\n\n---\n\n### **2. Small-Signal Derivation**\n\nApply a small-signal test voltage $v_t$ at the output node (drain of $M_1$) that injects a test current $i_t$:\n\n1. **Voltage at node $X$:**\n   $$v_X = i_t \\cdot r_{O2}$$\n\n2. **Gate-to-source and bulk-to-source voltages of $M_1$:**\n   $$v_{gs1} = v_g - v_s = 0 - v_X = -i_t r_{O2}$$\n   $$v_{bs1} = v_b - v_s = 0 - v_X = -i_t r_{O2} \\quad \\text{(assuming bulk is tied to } V_{DD}\\text{)}$$\n\n3. **Current through $r_{O1}$:**\n   The current through the channel is given by KCL at the drain of $M_1$:\n   $$i_t = g_{m1} v_{gs1} + g_{mb1} v_{bs1} + \\frac{v_t - v_X}{r_{O1}}$$\n   $$i_t = -(g_{m1} + g_{mb1}) i_t r_{O2} + \\frac{v_t - i_t r_{O2}}{r_{O1}}$$\n\n4. **Solving for $\\frac{v_t}{i_t}$:**\n   $$i_t \\left[1 + (g_{m1} + g_{mb1}) r_{O2} + \\frac{r_{O2}}{r_{O1}}\\right] = \\frac{v_t}{r_{O1}}$$\n   $$v_t = i_t \\left[ r_{O1} + r_{O2} + (g_{m1} + g_{mb1}) r_{O1} r_{O2} \\right]$$\n\n---\n\n### **3. Final Output Resistance Expressions**\n\n* **Exact Expression (with body effect):**\n  $$R_{\\text{out}} = r_{O1} + r_{O2} + (g_{m1} + g_{mb1}) r_{O1} r_{O2} = \\left[ 1 + (g_{m1} + g_{mb1}) r_{O1} \\right] r_{O2} + r_{O1}$$\n\n* **Exact Expression (neglecting body effect, $g_{mb1} = 0$):**\n  $$R_{\\text{out}} = r_{O1} + r_{O2} + g_{m1} r_{O1} r_{O2} = (1 + g_{m1} r_{O1}) r_{O2} + r_{O1}$$\n\n* **Approximate Expression (since $(g_{m1} + g_{mb1}) r_{O1} r_{O2} \\gg r_{O1} + r_{O2}$):**\n  $$R_{\\text{out}} \\approx (g_{m1} + g_{mb1}) r_{O1} r_{O2} \\quad \\text{or} \\quad R_{\\text{out}} \\approx g_{m1} r_{O1} r_{O2}$$",
        "format": "markdown",
        "sha256": "49928b9775e7c8a8522080d2761f8eedffb0ecf38a79560eeb3d0055cda520a5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, assigns M1 the cascode role, and gives the full output-resistance expression and valid approximations.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 2574,
        "total_tokens": 3682,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1646,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 2574,
        "total_tokens": 3682,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1646,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the PMOS transistor $M_2$ operates in the **saturation region**, we analyze its terminal voltages.\n\n---\n\n### 1. Terminal Voltages of $M_2$\nFor the PMOS transistor $M_2$:\n* **Source:** $V_{S2} = V_{DD}$\n* **Gate:** $V_{G2} = V_{b2}$\n* **Drain:** $V_{D2} = V_X$\n\n---\n\n### 2. Saturation Condition for PMOS $M_2$\nA PMOS transistor operates in saturation when:\n$$V_{SD2} \\ge V_{SG2} - |V_{TH2}|$$\n\nSubstituting the node voltages:\n$$(V_{DD} - V_X) \\ge (V_{DD} - V_{b2}) - |V_{TH2}|$$\n\nSimplifying this gives the maximum allowable voltage at node $X$:\n$$V_X \\le V_{b2} + |V_{TH2}|$$\n\n---\n\n### 3. Determining the Voltage at Node $X$ ($V_X$)\nNode $X$ is connected to the source of $M_1$. Therefore:\n$$V_X = V_{b1} + V_{SG1}$$\n\nSince $V_{SG1} = |V_{TH1}| + |V_{OD1}|$ (where $|V_{OD1}| = V_{SG1} - |V_{TH1}|$ is the overdrive voltage of $M_1$):\n$$V_X = V_{b1} + |V_{TH1}| + |V_{OD1}|$$\n\n---\n\n### 4. Required Condition on Bias Voltages\nSubstitute $V_X$ into the saturation condition:\n$$V_{b1} + V_{SG1} \\le V_{b2} + |V_{TH2}|$$\n\nRearranging for $V_{b2}$:\n$$V_{b2} \\ge V_{b1} + V_{SG1} - |V_{TH2}|$$\n\nAssuming matching threshold voltages ($|V_{TH1}| \\approx |V_{TH2}| = |V_{TH}|$):\n$$V_{b2} \\ge V_{b1} + (V_{SG1} - |V_{TH}|)$$\n\n$$\\mathbf{V_{b2} \\ge V_{b1} + |V_{OD1}|}$$\n\n*(or $V_{b2} \\ge V_{b1} + V_{SD1,\\text{sat}}$)*\n\n---\n\n### Summary of Conditions:\n1. **To keep $M_2$ in saturation:**\n   $$V_X \\le V_{b2} + |V_{TH2}| \\quad \\implies \\quad V_{b2} \\ge V_{b1} + |V_{OD1}|$$\n2. **To keep $M_2$ turned ON:**\n   $$V_{b2} \\le V_{DD} - |V_{TH2}|$$",
        "format": "markdown",
        "sha256": "fa460bf8c54038e321458107e0650440711a5416b43f8ca5e4bb71cffc02269f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives M2’s PMOS saturation condition, relates VX to Vb1 through M1’s source-gate voltage, and derives the equivalent bias condition Vb2 ≥ Vb1 + M1’s overdrive for matched thresholds.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2419,
        "total_tokens": 3535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1759,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2419,
        "total_tokens": 3535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1759,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the PMOS transistor $M_2$ is in the **saturation region**, it must satisfy the standard conditions for a PMOS device:\n\n---\n\n### 1. Basic Condition for Saturation of $M_2$\n\nFor a PMOS transistor, the saturation condition is:\n$$V_{SD2} \\ge V_{SG2} - |V_{TH2}|$$\n\nGiven the terminal voltages for $M_2$:\n- **Source:** $V_{S2} = V_{DD}$\n- **Gate:** $V_{G2} = V_{b2}$\n- **Drain:** $V_{D2} = V_X$\n\nSubstituting these voltages into the inequality:\n$$V_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TH2}|$$\n\nSimplifying this yields the maximum allowable voltage at node $X$:\n$$\\mathbf{V_X \\le V_{b2} + |V_{TH2}|}$$\n\n---\n\n### 2. Relating to the Bias Voltage $V_{b1}$\n\nThe voltage at node $X$ is determined by the gate bias of $M_1$ ($V_{b1}$) and its source-to-gate voltage ($V_{SG1}$):\n$$V_X = V_{b1} + V_{SG1} = V_{b1} + |V_{TH1}| + |V_{OD1}|$$\n*(where $|V_{OD1}| = V_{SG1} - |V_{TH1}|$ is the overdrive voltage of $M_1$)*\n\nSubstituting $V_X$ into the saturation condition:\n$$V_{b1} + V_{SG1} \\le V_{b2} + |V_{TH2}|$$\n\n$$V_{b1} + |V_{TH1}| + |V_{OD1}| \\le V_{b2} + |V_{TH2}|$$\n\n---\n\n### 3. Final Design Rule\n\nAssuming the threshold voltages are approximately equal ($|V_{TH1}| \\approx |V_{TH2}|$):\n\n$$V_{b2} - V_{b1} \\ge |V_{OD1}| \\quad \\Longleftrightarrow \\quad \\mathbf{V_{b1} \\le V_{b2} - |V_{OD1}|}$$\n\n### Summary of Requirements:\n1. **Turn $M_2$ ON:** Ensure $V_{b2} \\le V_{DD} - |V_{TH2}|$.\n2. **Keep $M_2$ in Saturation:** Bias $V_{b1}$ sufficiently lower than $V_{b2}$ such that:\n   $$V_{b1} \\le V_{b2} - |V_{OD1}| \\quad \\text{or} \\quad V_X \\le V_{b2} + |V_{TH2}|$$",
        "format": "markdown",
        "sha256": "896f815b41f9f09bd1b55b209bdb0a394b0830d973247c14773ceb533db244cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, and relates VX to Vb1 to derive the equivalent bias inequality.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2280,
        "total_tokens": 3396,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2280,
        "total_tokens": 3396,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given PMOS cascode circuit, both **$M_1$** and **$M_2$** are PMOS transistors. \n\nTo ensure that **$M_2$** operates in the **saturation region**, it must satisfy two conditions:\n\n---\n\n### 1. Condition to Turn ON $M_2$\nThe source-to-gate voltage must exceed the magnitude of the threshold voltage:\n$$V_{SG2} \\ge |V_{TH2}|$$\n\nSince the source is connected to $V_{DD}$ and the gate is biased at $V_{b2}$:\n$$V_{DD} - V_{b2} \\ge |V_{TH2}| \\implies V_{b2} \\le V_{DD} - |V_{TH2}|$$\n\n---\n\n### 2. Condition for Saturation of $M_2$\nA PMOS transistor is in saturation when its source-to-drain voltage satisfies:\n$$V_{SD2} \\ge V_{SG2} - |V_{TH2}|$$\n\nAlternatively, in terms of drain-to-gate voltage:\n$$V_{D2} \\le V_{G2} + |V_{TH2}|$$\n\nFor transistor $M_2$:\n* Source voltage: $V_{S2} = V_{DD}$\n* Gate voltage: $V_{G2} = V_{b2}$\n* Drain voltage: $V_{D2} = V_X$\n\nSubstituting these into the saturation inequality:\n$$V_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TH2}|$$\n\n$$-V_X \\ge -V_{b2} - |V_{TH2}|$$\n\n$$\\mathbf{V_X \\le V_{b2} + |V_{TH2}|}$$\n\n---\n\n### 3. Relation in terms of Bias Voltages ($V_{b1}$ and $V_{b2}$)\nThe node voltage $V_X$ is set by the source of $M_1$:\n$$V_X = V_{S1} = V_{b1} + V_{SG1}$$\n\nSubstitute this expression for $V_X$ into the saturation condition:\n$$V_{b1} + V_{SG1} \\le V_{b2} + |V_{TH2}|$$\n\n$$\\mathbf{V_{b2} \\ge V_{b1} + V_{SG1} - |V_{TH2}|}$$\n\nSince $V_{SG1} = |V_{TH1}| + V_{OV1}$ (where $V_{OV1}$ is the overdrive voltage of $M_1$), and assuming $|V_{TH1}| \\approx |V_{TH2}|$:\n\n$$\\mathbf{V_{b2} \\ge V_{b1} + V_{OV1}}$$\n\n---\n\n### Summary of Conditions:\n1. **$V_X \\le V_{b2} + |V_{TH2}|$** (Drain voltage condition at node $X$)\n2. **$V_{b2} \\ge V_{b1} + V_{OV1}$** (Gate bias voltage relationship)\n3. **$V_{b2} \\le V_{DD} - |V_{TH2}|$** (To keep $M_2$ turned on)",
        "format": "markdown",
        "sha256": "aa7accccfbe7f98e260604a5e6f3d8eb3f00799e3e68fb7c9befe36d6c7324d4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2's saturation condition, and relates VX to Vb1 to derive the equivalent bias condition. The additional turn-on condition is also correct.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3096,
        "total_tokens": 4212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3096,
        "total_tokens": 4212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Identification and Overview\nThe circuit is an **NMOS Cascode Amplifier** with an ideal current source load ($I_1$). \n\n* **$M_1$ (Input Transistor):** Operates as a **Common-Source (CS)** stage, converting the input voltage $v_{\\text{in}}$ into a small-signal current.\n* **$M_2$ (Cascode Transistor):** Operates as a **Common-Gate (CG)** stage with a fixed DC gate bias $V_{b1}$, which acts as a current buffer that shields node $X$ from voltage swings at $v_{\\text{out}}$.\n* **$I_1$:** Acts as an active pull-up load with high (or ideal infinite) output impedance.\n\n---\n\n### 2. DC Operating Conditions & Biasing\nFor proper linear amplification, both transistors must remain in the **saturation region**:\n\n1. **For $M_1$:**\n   $$V_{DS1} \\ge V_{GS1} - V_{TH1} = V_{OV1} \\implies V_X \\ge V_{OV1}$$\n2. **For $M_2$:**\n   $$V_X = V_{b1} - V_{GS2} = V_{b1} - (V_{TH2} + V_{OV2})$$\n   $$V_{DS2} \\ge V_{GS2} - V_{TH2} = V_{OV2} \\implies v_{\\text{out}} - V_X \\ge V_{OV2}$$\n\n#### Allowable Output Voltage Swing:\n* **Minimum output voltage:**\n  $$v_{\\text{out,min}} = V_X + V_{OV2} = V_{OV1} + V_{OV2}$$\n* **Maximum output voltage:** Limited by the minimum voltage required across the current source $I_1$ ($V_{I1,\\text{min}}$):\n  $$v_{\\text{out,max}} = V_{DD} - V_{I1,\\text{min}}$$\n\n---\n\n### 3. Small-Signal Output Impedance ($R_{\\text{out}}$)\n\nLooking into the drain of $M_2$, the transistor $M_2$ boosts the output resistance of $M_1$ ($r_{o1}$) connected to its source:\n\n$$R_{\\text{out}} = r_{o1} + r_{o2} + (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\nSince $(g_{m2} + g_{mb2}) r_{o1} r_{o2} \\gg r_{o1} + r_{o2}$, this can be approximated as:\n$$R_{\\text{out}} \\approx (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\n*(If body effect is neglected, $g_{mb2} = 0$, then $R_{\\text{out}} \\approx g_{m2} r_{o1} r_{o2}$)*.\n\n---\n\n### 4. Small-Signal Voltage Gain ($A_v$)\n\nThe overall transconductance of the cascode pair is approximately that of $M_1$:\n$$G_m \\approx g_{m1}$$\n\nAssuming an ideal current source ($R_{\\text{load}} = \\infty$), the open-circuit voltage gain is:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -G_m R_{\\text{out}} \\approx -g_{m1} \\left[ (g_{m2} + g_{mb2}) r_{o1} r_{o2} \\right]$$\n\nNeglecting the body effect:\n$$A_v \\approx -g_{m1} g_{m2} r_{o1} r_{o2}$$\n\n> **Key takeaway:** The voltage gain is proportional to $(g_m r_o)^2$, which is significantly higher than that of a single-transistor CS amplifier ($A_v \\approx -g_m r_o$).\n\n---\n\n### 5. High-Frequency Response & Miller Effect\n\n1. **Low Impedance at Node $X$:**\n   Looking into the source of $M_2$, the impedance is:\n   $$R_X \\approx \\frac{1}{g_{m2} + g_{mb2}} \\parallel r_{o1} \\approx \\frac{1}{g_{m2}}$$\n\n2. **Suppression of Miller Effect:**\n   The voltage gain from the input to node $X$ is small:\n   $$A_{v,X} = \\frac{v_X}{v_{\\text{in}}} \\approx -g_{m1} R_X \\approx -\\frac{g_{m1}}{g_{m2}} \\approx -1 \\quad (\\text{if } g_{m1} \\approx g_{m2})$$\n   \n   Because $|A_{v,X}| \\approx 1$, the Miller capacitance multiplication of $C_{gd1}$ at the input is minimal:\n   $$C_{\\text{in,Miller}} = C_{gd1}(1 + |A_{v,X}|) \\approx 2 C_{gd1}$$\n   \n   This drastically improves the **bandwidth** and high-frequency input impedance compared to a standard CS stage where $C_{gd1}$ is multiplied by the full large gain $|A_v|$.\n\n---\n\n### Summary of Trade-offs\n\n| Parameter | Cascode Stage vs. Basic CS Stage |\n| :--- | :--- |\n| **Voltage Gain** | **Much Higher** ($\\approx (g_m r_o)^2$ vs. $g_m r_o$) |\n| **Output Impedance** | **Much Higher** ($\\approx g_m r_o^2$ vs. $r_o$) |\n| **Bandwidth (Input Pole)**| **Much Higher** (Miller multiplication on $C_{gd1}$ eliminated) |\n| **Output Voltage Swing** | **Reduced** (requires at least $V_{OV1} + V_{OV2}$ headroom) |\n| **Circuit Complexity / Supply** | Requires higher $V_{DD}$ headroom and an extra bias voltage $V_{b1}$ |",
        "format": "markdown",
        "sha256": "343f03f26aaa2e9b6df798fde588cc74a4258fc778d9228101c357d6978f5085"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It meets the explicit full-credit rule: it identifies M1 as the common-source input NMOS, M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain. Its optional node-X/Miller discussion is inaccurate for an ideal current-source load, but does not change the required topology and gain answer.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2605,
        "total_tokens": 3686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2605,
        "total_tokens": 3686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is an **NMOS Cascode Amplifier** with an ideal DC current-source load ($I_1$). \n\n---\n\n### 1. Circuit Topology & Roles of Components\n\n* **$M_1$ (Input Transistor):** Operates as a **Common-Source (CS)** stage that converts the input voltage $v_{\\text{in}}$ into a small-signal current.\n* **$M_2$ (Cascode Transistor):** Operates as a **Common-Gate (CG)** stage biased at a constant DC gate voltage $V_{b1}$. It acts as a current buffer, passing the signal current to the output node while isolating (shielding) node $X$ from voltage variations at $v_{\\text{out}}$.\n* **$I_1$ (Current Source Load):** Provides the DC bias current and presents an ideal infinite (or very high) small-signal load impedance.\n\n---\n\n### 2. DC Operating Region & Voltage Swing\n\nFor linear amplification, both transistors must operate in the **saturation region**:\n\n1. **Conditions for $M_1$ in saturation:**\n   $$V_{DS1} \\ge V_{GS1} - V_{TH1} = V_{ov1} \\implies V_X \\ge V_{\\text{in}} - V_{TH1}$$\n\n2. **Conditions for $M_2$ in saturation:**\n   $$V_{DS2} \\ge V_{GS2} - V_{TH2} = V_{ov2} \\implies V_{\\text{out}} - V_X \\ge V_{b1} - V_X - V_{TH2} \\implies V_{\\text{out}} \\ge V_{b1} - V_{TH2}$$\n\n3. **Node $X$ Voltage:**\n   $$V_X = V_{b1} - V_{GS2}$$\n\n4. **Minimum Output Voltage ($V_{\\text{out,min}}$):**\n   To keep both $M_1$ and $M_2$ in saturation simultaneously:\n   $$V_{\\text{out,min}} = V_{DS1,\\text{sat}} + V_{DS2,\\text{sat}} = V_{ov1} + V_{ov2}$$\n   *(where $V_{ov} = V_{GS} - V_{TH}$ is the overdrive voltage).*\n\n---\n\n### 3. Small-Signal Analysis\n\nLet:\n* $g_{m1}, g_{m2}$ be the transconductances of $M_1$ and $M_2$.\n* $g_{mb2}$ be the body-effect transconductance of $M_2$ (since the source of $M_2$ is at node $X$, not ground).\n* $r_{o1}, r_{o2}$ be the channel-length modulation output resistances of $M_1$ and $M_2$.\n\n#### A. Output Resistance ($R_{\\text{out}}$)\nLooking into the drain of $M_2$ (with an ideal current source $I_1$ having $r_{\\text{load}} = \\infty$):\n$$R_{\\text{out}} = r_{o1} + r_{o2} + (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\nSince $(g_{m2} + g_{mb2}) r_{o1} r_{o2} \\gg r_{o1} + r_{o2}$, this can be approximated as:\n$$R_{\\text{out}} \\approx (g_{m2} + g_{mb2}) r_{o1} r_{o2} \\approx g_{m2} r_{o1} r_{o2}$$\n\n#### B. Short-Circuit Transconductance ($G_m$)\nThe overall transconductance of the cascode stage is dominated by the input device $M_1$:\n$$G_m \\approx g_{m1}$$\n\n#### C. Small-Signal Voltage Gain ($A_v$)\nThe open-circuit voltage gain is:\n$$A_v = -G_m R_{\\text{out}} = -g_{m1} \\left[ r_{o1} + r_{o2} + (g_{m2} + g_{mb2}) r_{o1} r_{o2} \\right]$$\n\n$$\\mathbf{A_v \\approx -g_{m1} (g_{m2} + g_{mb2}) r_{o1} r_{o2} \\approx -g_{m1} g_{m2} r_{o1} r_{o2}}$$\n\n---\n\n### 4. Key Advantages\n\n1. **High Voltage Gain:** \n   Compared to a simple common-source stage (gain $\\approx -g_{m1} r_{o1}$), the cascode topology boosts the output resistance and voltage gain by a factor of roughly $g_{m2} r_{o2}$.\n2. **Suppression of the Miller Effect:**\n   The impedance looking into the source of $M_2$ is low:\n   $$R_X \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n   This makes the voltage gain from $v_{\\text{in}}$ to node $X$ very small ($A_{vX} \\approx -g_{m1}/g_{m2} \\approx -1$). Consequently, the Miller multiplication of the gate-drain capacitance $C_{gd1}$ is drastically reduced, yielding a **much higher input bandwidth**.\n3. **High Output-to-Input Isolation:**\n   $M_2$ shields $M_1$ from large output voltage swings, minimizing feedback and distortion.\n\n---\n\n### 5. Trade-offs and Limitations\n\n* **Reduced Output Voltage Swing:** Stacking $M_2$ on top of $M_1$ consumes at least two overdrive voltages ($V_{ov1} + V_{ov2}$), limiting the maximum negative output swing compared to a simple common-source amplifier.\n* **Body Effect on $M_2$:** The source of $M_2$ is at node $X$ ($V_X > 0$), while its substrate is typically grounded. This increases $V_{TH2}$ and introduces $g_{mb2}$, slightly modifying bias levels and gain.",
        "format": "markdown",
        "sha256": "49737baac670130aa463faddc7716b9ce861fd7d8278857fd0b3da5fc79c56e3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS, M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain, satisfying the explicit full-credit rule. The node-X/Miller discussion is too broad for an ideal current-source load but does not change the central gain result.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2679,
        "total_tokens": 3760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2679,
        "total_tokens": 3760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is an **NMOS Cascode Common-Source (CS) Amplifier** with an ideal current source load ($I_1$). \n\n---\n\n### 1. Circuit Overview and Operating Principle\n\n* **$M_1$ (Input Transistor):** Operates as a common-source transconductance stage. It converts the input small-signal voltage $v_{\\text{in}}$ into a small-signal current ($i_d \\approx g_{m1} v_{\\text{in}}$).\n* **$M_2$ (Cascode Transistor):** Operates as a common-gate current buffer biased at gate voltage $V_{b1}$. It passes the signal current from node $X$ to the output node $v_{\\text{out}}$ while providing a low impedance at node $X$ and a very high impedance looking into its drain.\n* **$I_1$ (Active Load):** An ideal DC current source providing infinite load impedance ($R_I = \\infty$) in small-signal analysis.\n\n---\n\n### 2. Small-Signal Analysis\n\n#### A. Low-Frequency Voltage Gain ($A_v$)\nThe small-signal voltage gain is given by:\n$$A_v = -G_m R_{\\text{out}}$$\n\n1. **Overall Transconductance ($G_m$):**\n   Since $M_2$ simply buffers the current from $M_1$:\n   $$G_m \\approx g_{m1}$$\n\n2. **Output Resistance ($R_{\\text{out}}$):**\n   Looking down into the drain of $M_2$, the cascode configuration boosts the output impedance:\n   $$R_{\\text{out}} = R_{\\text{down}} = r_{o1} + r_{o2} + (g_{m2} + g_{mb2}) r_{o1} r_{o2} \\approx (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n   *(where $g_{mb2}$ accounts for the body effect in $M_2$ because its source is at potential $V_X \\neq 0$)*.\n\n3. **Voltage Gain ($A_v$):**\n   $$A_v \\approx -g_{m1} \\left[ (g_{m2} + g_{mb2}) r_{o1} r_{o2} \\right] \\approx -g_{m1} g_{m2} r_{o1} r_{o2}$$\n\n> **Key Takeaway:** The cascode topology boosts the intrinsic gain from $\\mathcal{O}(g_m r_o)$ (for a simple CS stage) to $\\mathcal{O}\\big((g_m r_o)^2\\big)$.\n\n---\n\n#### B. High-Frequency Response & Miller Effect Reduction\n* **Impedance at Node $X$:**\n  $$R_X \\approx \\frac{1}{g_{m2} + g_{mb2}} \\parallel r_{o1} \\approx \\frac{1}{g_{m2}}$$\n* **Gain from $v_{\\text{in}}$ to Node $X$:**\n  $$A_{v,X} \\approx -g_{m1} R_X \\approx -\\frac{g_{m1}}{g_{m2} + g_{mb2}} \\approx -1 \\quad (\\text{if } M_1 \\text{ and } M_2 \\text{ are matched})$$\n\n* **Miller Effect:**\n  Because the voltage gain at the drain of $M_1$ (node $X$) is very small ($\\approx -1$), the gate-drain capacitance $C_{gd1}$ is **not** multiplied by a large factor:\n  $$C_{\\text{in}} \\approx C_{gs1} + (1 - A_{v,X})C_{gd1} \\approx C_{gs1} + 2C_{gd1}$$\n  This effectively eliminates the dominant Miller capacitance multiplication, significantly **increasing the bandwidth** compared to a conventional common-source amplifier.\n\n---\n\n### 3. DC Biasing and Output Voltage Swing\n\nFor all transistors to operate in the **saturation region**:\n\n1. **For $M_1$ in saturation:**\n   $$V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_X \\ge V_{ov1}$$\n\n2. **Bias Voltage $V_{b1}$ Requirement:**\n   Since $V_X = V_{b1} - V_{GS2}$, to keep $M_1$ at the edge of saturation:\n   $$V_{b1} \\ge V_{ov1} + V_{GS2} = V_{ov1} + V_{ov2} + V_{TH2}$$\n\n3. **Output Voltage Swing:**\n   * **Minimum Output Voltage ($v_{\\text{out,min}}$):**\n     $$v_{\\text{out,min}} = V_{X} + V_{ov2} = V_{ov1} + V_{ov2}$$\n   * **Maximum Output Voltage ($v_{\\text{out,max}}$):**\n     Determined by the headroom required across the current source $I_1$ (e.g., $V_{DD} - |V_{ov,P}|$ if implemented by a PMOS transistor).\n\n---\n\n### 4. Summary of Advantages and Trade-offs\n\n| Feature | Cascode CS Amplifier | Standard CS Amplifier |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | Extremely High $\\sim (g_m r_o)^2$ | Moderate $\\sim g_m r_o$ |\n| **Output Resistance ($R_{\\text{out}}$)** | Very High $\\sim g_{m} r_o^2$ | Moderate $\\sim r_o$ |\n| **Bandwidth (Miller Effect)** | **High** (Miller effect suppressed) | **Low** (Severe Miller effect on $C_{gd1}$) |\n| **Reverse Isolation** | Excellent (shielded by $M_2$) | Moderate |\n| **Voltage Swing Headroom** | Reduced by one overdrive voltage ($V_{ov2}$) | Larger output swing |",
        "format": "markdown",
        "sha256": "150763a5e3b41dbf98c6a3e4af40e97f0b52b9ab865811b36a89a471f5941813"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS, M2 as the common-gate NMOS cascode, and gives the ideal-load gain as approximately −gm1(gm2+gmb2)ro1ro2. Its node-X and Miller-effect discussion is imprecise, but it meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2909,
        "total_tokens": 3990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1558,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2909,
        "total_tokens": 3990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1558,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, this is not a cascode structure.** \n\n---\n\n### **Detailed Explanation**\n\n#### **1. Transistor Identification and Operation**\n* **$M_2$ (NMOS):** \n  * The arrow points outward at the bottom terminal, identifying it as an **NMOS** device whose **source** is at the bottom and **drain** is at the top connected to $V_{\\text{out}}$ and $R_D$.\n  * Its gate is tied to a constant bias voltage $V_{b1}$, configuring $M_2$ as a **Common-Gate (CG)** stage.\n\n* **$M_1$ (PMOS):** \n  * The arrow at the top terminal points inward toward the channel, identifying it as a **PMOS** device.\n  * The top terminal is the **source** (connected to the source of $M_2$), and the bottom terminal is the **drain** (connected to ground).\n  * The input signal $V_{\\text{in}}$ is applied to the gate, and the output is taken from the source. Therefore, $M_1$ operates as a **Common-Drain (CD)** stage (Source Follower).\n\n---\n\n#### **2. Why It Is Not a Cascode**\n* **Definition of a Cascode:** A cascode amplifier consists of a **Common-Source (CS)** transconductance stage followed by a **Common-Gate (CG)** current buffer stage (i.e., **CS + CG**). In a true cascode:\n  * The input transistor ($M_1$) converts the input voltage to a current via its **drain** ($i_d \\approx g_{m1}v_{\\text{in}}$).\n  * This current is then injected into the **source** of the cascode transistor ($M_2$).\n  * The resistance looking down into $M_1$ is large ($r_{o1}$), which provides the characteristic cascode **output impedance boost** ($R_{\\text{out}} \\approx g_{m2}r_{o2}r_{o1}$).\n\n* **In this circuit:**\n  * $M_1$ is connected with its **drain grounded** and output taken from its **source**.\n  * This makes $M_1$ a **voltage buffer (Source Follower)** rather than a transconductor.\n  * The resistance seen looking into the source of $M_1$ is low ($\\approx 1/g_{m1}$), so the circuit does **not** provide the high output impedance boost characteristic of a cascode amplifier.\n\n---\n\n### **Conclusion**\nThis circuit is a **cascade of a Common-Drain stage and a Common-Gate stage (CD + CG)**, not a cascode.",
        "format": "markdown",
        "sha256": "dbfeded2d06ecb320b08366a0a4fd598a644e18bcfd82ea681d04ff0d3cd3dc5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower with its drain grounded, so the circuit is not a cascode and lacks cascode output-resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4146,
        "total_tokens": 5260,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4146,
        "total_tokens": 5260,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, this is not a cascode structure.** \n\n---\n\n### **Why it is not a cascode:**\n\n1. **Definition of a Cascode:**\n   * A true cascode amplifier consists of a **Common-Source (CS)** (or Common-Emitter) stage followed by a **Common-Gate (CG)** (or Common-Base) stage. \n   * In a cascode, the input transistor converts the input voltage to a signal current at its **drain**, which is then routed into the **source** of the CG transistor.\n\n2. **Transistor Configurations in this Circuit:**\n   * **$M_1$ is a PMOS transistor** (indicated by the arrow pointing inward toward the channel at the top terminal). Its drain is connected to ground, its input $V_{\\text{in}}$ is at the gate, and the signal is taken from its source. Therefore, $M_1$ operates as a **Common-Drain (Source Follower)** stage.\n   * **$M_2$ is an NMOS transistor** (indicated by the arrow pointing outward at its source) with a fixed gate bias $V_{b1}$, operating as a **Common-Gate** stage.\n   * This makes the circuit a **Common-Drain + Common-Gate (CD-CG)** cascade.\n\n---\n\n### **Key Differences from a True Cascode:**\n\n* **Output Impedance Boosting:** \n  * In a true cascode, the cascode transistor $M_2$ sees the high drain impedance ($r_{o1}$) of $M_1$, boosting the overall output impedance to $\\approx g_{m2} r_{o2} r_{o1}$.\n  * In this circuit, the source of $M_2$ sees the low source impedance of $M_1$ ($\\approx 1/g_{m1}$), so **no impedance boosting** occurs ($R_{\\text{out}} \\approx r_{o2}$).\n\n* **Gain & Polarity:**\n  * A standard cascode provides high inverting voltage gain ($A_v \\approx -g_{m1} R_D$).\n  * This CD-CG configuration provides a lower, **non-inverting** gain:\n    $$A_v = +\\left(\\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}}\\right) R_D$$",
        "format": "markdown",
        "sha256": "dea9498d2a4c86f28972536a69dd932fdd7fcb17e04879568d82ed935f520e85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower and M2 as common-gate, explaining why this is not a cascode and lacks the cascode’s gm·ro resistance boost. The approximate output-resistance statement is a minor imprecision and does not affect the essential answer.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 3550,
        "total_tokens": 4664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3037,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 3550,
        "total_tokens": 4664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3037,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, this is not a cascode structure.**\n\n---\n\n### **Detailed Explanation**\n\n1. **Transistor Types and Connections:**\n   * **$M_2$ is an NMOS transistor** (indicated by the arrow pointing outwards at the bottom terminal, which is its **source**).\n   * **$M_1$ is a PMOS transistor** (indicated by the arrow pointing inwards at the top terminal, which is its **source**).\n   * The two transistors are connected **source-to-source**.\n\n---\n\n2. **Why it fails to be a Cascode:**\n\n   * **Topological Definition:** \n     A true cascode amplifier consists of a **Common-Source (CS)** input stage followed by a **Common-Gate (CG)** stage. In a proper cascode, the signal current is taken from the **drain** of the input device (high impedance) and fed into the **source** of the cascode device (low impedance). \n     \n     In this circuit, the input $V_{\\text{in}}$ is applied to the gate of $M_1$, whose drain is tied to ground. Thus, $M_1$ acts as a **Common-Drain (source follower)** stage, not a Common-Source stage.\n\n   * **Lack of Impedance Boosting:** \n     In a standard cascode, the output impedance looking into the drain of $M_2$ is boosted to approximately $g_{m2} r_{O2} r_{O1}$ because the source of $M_2$ sees the high drain resistance ($r_{O1}$) of $M_1$. \n     \n     Here, the source of $M_2$ sees the low impedance looking into the source of $M_1$ ($\\approx 1/g_{m1}$). As a result, the output impedance is not boosted and remains approximately:\n     $$R_{\\text{out}} \\approx r_{O2} \\left(1 + \\frac{g_{m2}}{g_{m1}}\\right) \\approx 2r_{O2} \\quad (\\text{if } g_{m1} \\approx g_{m2})$$\n\n   * **Degraded Voltage Gain:** \n     The combined effective transconductance of the two series source-connected devices is:\n     $$G_m = \\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}}$$\n     This makes the overall small-signal gain roughly $A_v \\approx +G_m R_D \\approx \\frac{1}{2} g_m R_D$, which is actually **lower** than a simple single-transistor common-source amplifier ($g_m R_D$).\n\n---\n\n### **Conclusion**\nBecause the two transistors are connected **source-to-source** rather than **drain-to-source**, this circuit is a **source-follower driving a common-gate stage**, not a cascode.",
        "format": "markdown",
        "sha256": "1044b940996784a794e37e028322df916a8a15c9894d6c138f5c801706641799"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower, not a common-source input device, and explains that the structure lacks cascode resistance boosting. Its approximate output-resistance expression is consistent with the golden solution.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4009,
        "total_tokens": 5123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4009,
        "total_tokens": 5123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is significantly less pronounced in a **cascode amplifier** because the circuit is specifically designed to minimize the voltage gain across the input transistor's parasitic feedback capacitance. \n\nHere is a step-by-step breakdown of why and how this happens.\n\n---\n\n### 1. The Baseline: Why the Miller Effect is Bad in a Common-Source (CS) Stage\nIn a standard Common-Source (or Common-Emitter) amplifier:\n* The input is at the **Gate**, and the output is at the **Drain**.\n* A parasitic capacitance, $C_{gd}$, connects the input to the output.\n* The amplifier has a large inverting voltage gain: $A_v = -g_m R_L$.\n\nAccording to **Miller’s Theorem**, the effective capacitance seen at the input is:\n$$C_{in, \\text{Miller}} = C_{gd} \\cdot (1 - A_v) = C_{gd} \\cdot (1 + |A_v|)$$\n\nIf the voltage gain is large (e.g., $|A_v| = 50$), $C_{gd}$ is multiplied by $51$. This large equivalent capacitance combines with the source resistance to create a low-frequency pole, **drastically reducing the amplifier’s bandwidth**.\n\n---\n\n### 2. The Cascode Solution: Decoupling Gain from Voltage Swing\nA cascode amplifier avoids this by stacking two transistors:\n1. **$M_1$ (Input Stage):** Common-Source (CS) configuration.\n2. **$M_2$ (Cascode Stage):** Common-Gate (CG) configuration.\n\n```\n       V_DD\n        |\n       [R_L]\n        |\n        +-----> V_out (Large voltage swing)\n        |\n     [ M_2 ]  (Common-Gate: Gate at AC Ground)\n        |\n   Node X ----> (Low voltage swing)\n        |\n     [ M_1 ]  (Common-Source: Input at Gate)\n        |\n       GND\n```\n\n#### Step A: Low Impedance at the Intermediate Node (Node X)\nThe input transistor $M_1$ drives current into the source of $M_2$. \n* The input impedance looking into the source of a Common-Gate transistor ($M_2$) is very low: \n  $$R_{in2} \\approx \\frac{1}{g_{m2}}$$\n\n#### Step B: Suppressed Voltage Gain for $M_1$\nThe voltage gain $A_{v1}$ across the first transistor (from the gate of $M_1$ to its drain at Node X) is determined by this low impedance:\n$$A_{v1} = \\frac{V_X}{V_{in}} \\approx -g_{m1} \\cdot R_{in2} = -g_{m1} \\cdot \\frac{1}{g_{m2}} = -\\frac{g_{m1}}{g_{m2}}$$\n\nIf both transistors are biased identically and have similar sizing, $g_{m1} \\approx g_{m2}$, meaning:\n$$A_{v1} \\approx -1$$\n\n#### Step C: The Resulting Miller Multiplication\nBecause the voltage swing at Node X is very small, the Miller multiplication across $C_{gd1}$ is almost nonexistent:\n$$C_{in, \\text{Miller}} = C_{gd1} \\cdot (1 - A_{v1}) \\approx C_{gd1} \\cdot (1 - (-1)) = 2C_{gd1}$$\n\nInstead of being multiplied by $50\\times$ or $100\\times$, **$C_{gd1}$ is only multiplied by $\\approx 2$**.\n\n---\n\n### 3. Why Doesn't $M_2$ Suffer from the Miller Effect?\nYou might wonder if the Miller effect simply moved to the second transistor ($M_2$), where the large output voltage swing actually occurs.\n\nIt does not, because **$M_2$ is in a Common-Gate configuration**:\n* The gate of $M_2$ is connected to an AC ground (a constant DC bias voltage).\n* The parasitic capacitance $C_{gd2}$ sits between the output (Drain) and **AC Ground** (Gate), not back to the input.\n* It simply acts as a standard load capacitance at the output node ($C_{out} \\approx C_{gd2}$), completely eliminating any feedback loop that could cause Miller multiplication.\n\n---\n\n### Summary\nThe cascode configuration makes the Miller effect negligible because **$M_2$ acts as a current buffer and voltage shield**:\n1. $M_1$ converts the input voltage into a current, but its drain voltage is **\"clamped\"** by the low input impedance of $M_2$, keeping the local voltage gain at $\\approx -1$.\n2. $M_2$ passes that current to the high-impedance load $R_L$, creating the large overall voltage gain at the output without allowing that voltage swing to feed back into the input of $M_1$. \n\nThis gives the cascode the **high gain of a common-source amplifier** combined with the **high bandwidth of a low-gain amplifier**.",
        "format": "markdown",
        "sha256": "84ab5e5c79c512b5db863209023d09d893e3c8ecbd3eae3030693aa5fb305cd8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the roughly −gm1/(gm2+gmb2) gain across Cgd1, giving about 2× Miller multiplication rather than the full-stage gain. Calling the effect nearly nonexistent overstates it, but the answer also states the correct factor and this is a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 2716,
        "total_tokens": 2729,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1580,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 2716,
        "total_tokens": 2729,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1580,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** is drastically less pronounced in a cascode amplifier because the circuit is specifically designed to **limit the voltage swing across the input transistor's parasitic capacitance**, effectively neutralizing the Miller multiplication factor.\n\nHere is a step-by-step breakdown of why and how this happens.\n\n---\n\n### 1. The Root Cause of the Miller Effect\nIn a standard single-transistor Common-Source (or Common-Emitter) amplifier:\n* A parasitic capacitance ($C_{gd}$) exists between the input (Gate) and output (Drain).\n* Because the amplifier inverts and provides high voltage gain ($-A_v$), any small voltage change at the input causes a large, opposite voltage change at the drain.\n* The effective input capacitance is magnified by the Miller formula:\n  $$C_{in, \\text{Miller}} = C_{gd} \\cdot (1 + |A_v|)$$\n* If the gain is high (e.g., $|A_v| = 50$), the input sees $51 \\times C_{gd}$, which severely degrades the amplifier's high-frequency bandwidth.\n\n---\n\n### 2. How the Cascode Topology Fixes This\nA cascode consists of two stacked transistors:\n1. **$M_1$ (Input stage):** Common-Source (CS) configuration.\n2. **$M_2$ (Output stage):** Common-Gate (CG) configuration, with its gate tied to an AC ground (a fixed DC bias voltage).\n\n```\n          VDD\n           |\n         [R_L]\n           |\n      +----o---- V_out\n      |    |\n     ---  (M2 - Common Gate, Gate at AC Ground)\n     ---\n      |\n      o--------- Node X (Intermediate Node)\n      |\n     ---  (M1 - Common Source, Input at Gate)\n     ---\n      |\n     GND\n```\n\n#### A. The First Transistor ($M_1$) Has Almost No Voltage Gain\nThe input signal enters the gate of $M_1$. The drain of $M_1$ is connected to the source of $M_2$ (Node $X$). \n\n* The impedance looking into the source of the Common-Gate transistor $M_2$ is very low: \n  $$R_{in, M2} \\approx \\frac{1}{g_{m2}}$$\n* Therefore, the load resistance seen by $M_1$ is only $\\frac{1}{g_{m2}}$.\n* The voltage gain of the first stage ($A_{v1} = \\frac{v_x}{v_{in}}$) is:\n  $$A_{v1} \\approx -g_{m1} \\times R_{in, M2} = -g_{m1} \\times \\frac{1}{g_{m2}} = -\\frac{g_{m1}}{g_{m2}}$$\n* Since $M_1$ and $M_2$ typically have similar transconductances ($g_{m1} \\approx g_{m2}$), the voltage gain of $M_1$ is roughly:\n  $$A_{v1} \\approx -1$$\n\n#### B. The Miller Capacitance is Drastically Reduced\nBecause the voltage swing at Node $X$ is clamped to be very small, the Miller multiplication across $C_{gd1}$ is negligible:\n$$C_{in, \\text{Miller}} = C_{gd1} \\cdot (1 - A_{v1}) \\approx C_{gd1} \\cdot (1 - (-1)) = 2 \\cdot C_{gd1}$$\n\nInstead of being multiplied by a large number (like 50 or 100), **$C_{gd1}$ is only multiplied by $\\approx 2$**.\n\n---\n\n### 3. Why Doesn't $M_2$ Reintroduce the Miller Effect?\nThe second transistor ($M_2$) provides the high voltage gain of the overall circuit ($A_{v2} \\approx g_{m2} R_L$), but it does not cause a Miller problem because:\n* **The Gate of $M_2$ is connected to AC Ground:** The parasitic capacitance between the drain and gate of $M_2$ ($C_{gd2}$) connects the **output node directly to ground**, not back to an input signal path.\n* Since it does not bridge an input-to-output path with inverting gain, **no Miller multiplication occurs.** It simply appears as a small, unmultiplied parasitic load capacitance at the output.\n\n---\n\n### Summary\nThe cascode separates the tasks of **amplifying current** and **providing voltage gain**:\n1. **$M_1$** converts input voltage to current with virtually **no voltage gain**, effectively eliminating the Miller multiplication of $C_{gd1}$.\n2. **$M_2$** acts as a current buffer that creates the **large voltage gain** at the output, but because its gate is grounded, it shields the input from any feedback.\n\nThis allows the cascode to achieve the **high gain of a single-stage amplifier** while maintaining the **wide bandwidth of a circuit free from the Miller effect**.",
        "format": "markdown",
        "sha256": "dec92e1b98fabb085b386fb48718aea8acff634f4546b17bc76761d7cde077c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance M1 drain node and estimates its gain near −1, giving about 2× Cgd rather than multiplication by the full stage gain. It overstates the reduction as negligible or effectively eliminated, but the golden solution treats this overstatement as a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 2870,
        "total_tokens": 2883,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1751,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 2870,
        "total_tokens": 2883,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1751,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is significantly less pronounced (or effectively eliminated) in a **cascode amplifier** because the architecture **drastically reduces the voltage gain across the input transistor**, thereby preventing the multiplication of its feedback capacitance.\n\nHere is a step-by-step breakdown of why this happens:\n\n---\n\n### 1. The Problem: Miller Effect in a Single-Stage Amplifier\nIn a standard Common-Source (MOSFET) or Common-Emitter (BJT) amplifier:\n* A parasitic capacitance exists between the input and the output: the gate-to-drain capacitance ($C_{gd}$) or base-to-collector capacitance ($C_{\\mu}$).\n* The stage provides a large negative voltage gain ($A_v = -g_m R_L$).\n* According to **Miller’s Theorem**, the effective capacitance seen at the input is multiplied by the gain:\n  $$C_{in, \\text{Miller}} = C_{gd} \\cdot (1 - A_v) = C_{gd} \\cdot (1 + |A_v|)$$\n* Because $|A_v|$ is large, $C_{in, \\text{Miller}}$ becomes huge, forming a low-pass filter with the source resistance and severely **limiting the amplifier's high-frequency bandwidth**.\n\n---\n\n### 2. The Cascode Solution\nA cascode amplifier consists of two stacked transistors:\n1. **$M_1$ (Input Stage):** Common-Source (CS) configuration.\n2. **$M_2$ (Cascode Stage):** Common-Gate (CG) configuration, acting as a current buffer.\n\n```text\n         Vdd\n          |\n         [RL]\n          |\n       +--o---- Vout\n       |\n     |/ \n--+--|  M2 (Common Gate - AC Ground at Gate)\n  |  |>\n  |   |\n Vbias+-- Node X (Intermediate Node)\n      |\n    |/ \nVin-|   M1 (Common Source - Input)\n    |>\n      |\n     GND\n```\n\n---\n\n### 3. Why the Miller Effect is Suppressed\n\n#### A. The Low Impedance at the Intermediate Node\nThe drain of the input transistor ($M_1$) connects to the source of the cascode transistor ($M_2$) at **Node X**. \n* The input impedance looking into the source of a Common-Gate transistor ($M_2$) is very low: \n  $$R_{in2} \\approx \\frac{1}{g_{m2}}$$\n\n#### B. The Voltage Gain of the Input Transistor is $\\approx -1$\nThe voltage gain across the input transistor ($M_1$) is the gain from the input $V_{in}$ to the intermediate node $V_X$:\n$$A_{v1} = \\frac{V_X}{V_{in}} = -g_{m1} \\times R_{in2} \\approx -g_{m1} \\times \\frac{1}{g_{m2}}$$\n\nIf both transistors are biased with the same current and have similar geometries, their transconductances are roughly equal ($g_{m1} \\approx g_{m2}$). Therefore:\n$$A_{v1} \\approx -1$$\n\n#### C. Minimal Capacitance Multiplication\nNow, applying Miller's Theorem to $M_1$'s capacitance ($C_{gd1}$):\n$$C_{in, \\text{Miller}} = C_{gd1} \\cdot (1 - A_{v1}) \\approx C_{gd1} \\cdot (1 - (-1)) = 2 \\cdot C_{gd1}$$\n\nInstead of being multiplied by a massive factor (like $50\\times$ or $100\\times$), $C_{gd1}$ is only multiplied by **$2$**. \n\n---\n\n### 4. What Happens to the High Output Voltage Swing?\nYou might wonder: *doesn't $M_2$ suffer from the Miller effect since it provides the large voltage gain to $V_{out}$?*\n\n**No, because $M_2$ is a Common-Gate stage:**\n* Its gate is held at an AC ground (a constant DC bias voltage).\n* The grounded gate acts as an **electrostatic shield** between the output node ($V_{out}$) and the input/intermediate nodes.\n* The parasitic capacitance between the output and AC ground is $C_{gd2}$, which only appears as a load capacitance at the output—it does **not** feed back to the input to cause a Miller multiplication.\n\n---\n\n### Summary\nThe cascode configuration separates **transconductance (current generation)** from **voltage gain**:\n1. **$M_1$** converts the input voltage to a current with almost **no voltage gain** ($A_v \\approx -1$), eliminating the Miller multiplication of its input capacitance.\n2. **$M_2$** passes that current to the high-impedance load to create the **high voltage gain**, but its grounded gate prevents any Miller feedback to the input. \n\nThis results in a circuit with the high gain of a single-stage amplifier but a significantly higher bandwidth.",
        "format": "markdown",
        "sha256": "3d18fa189a3ad2ac42bd960150c5a052e513002791f06668ab36be942d31e04a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and derives an M1 gain near −1, so Cgd1 is multiplied by about 2 rather than the full-stage gain. Its claims that the effect is nearly eliminated overstate the suppression, but it explicitly gives the factor of 2; this is a minor flaw under the golden solution.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 2598,
        "total_tokens": 2611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 2598,
        "total_tokens": 2611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **1. Circuit Overview and Identification**\n\nThe given circuit is a **Common-Gate (CG) Amplifier** with a PMOS **current-source active load**.\n\n* **$M_2$ (NMOS Transistor):** Configured as the input amplifying device in a common-gate topology.\n  * **Input ($V_{\\text{in}}$):** Applied at the **source** of $M_2$.\n  * **Gate:** Biased at a fixed DC voltage $V_{b1}$ (acting as an AC ground).\n  * **Drain:** Connected to the output node $V_{\\text{out}}$.\n* **$M_1$ (PMOS Transistor):** Acts as a high-impedance active current-source load.\n  * **Gate:** Biased at a fixed DC voltage $V_{b2}$.\n  * **Source:** Connected to $V_{DD}$.\n  * **Drain:** Connected to the output node $V_{\\text{out}}$.\n\n---\n\n### **2. DC Biasing and Output Voltage Swing**\n\nFor linear amplification, both transistors must be biased in the **saturation region**:\n\n1. **For $M_2$ (NMOS):**\n   $$V_{DS2} \\ge V_{GS2} - V_{TH2} \\implies V_{\\text{out}} - V_{\\text{in}} \\ge (V_{b1} - V_{\\text{in}}) - V_{TH2}$$\n   $$V_{\\text{out}} \\ge V_{b1} - V_{TH2}$$\n\n2. **For $M_1$ (PMOS):**\n   $$V_{SD1} \\ge V_{SG1} - |V_{TH1}| \\implies V_{DD} - V_{\\text{out}} \\ge (V_{DD} - V_{b2}) - |V_{TH1}|$$\n   $$V_{\\text{out}} \\le V_{b2} + |V_{TH1}| = V_{DD} - |V_{DS,\\text{sat1}}|$$\n\n* **Allowable Output Voltage Swing:**\n  $$V_{b1} - V_{TH2} \\le V_{\\text{out}} \\le V_{DD} - |V_{DS,\\text{sat1}}|$$\n\n---\n\n### **3. Small-Signal Analysis**\n\nLet:\n* $g_{m2}, g_{mb2}$ be the transconductance and body-effect transconductance of $M_2$.\n* $r_{o1}, r_{o2}$ be the output resistances of $M_1$ and $M_2$, respectively.\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\nApplying KCL at the output node ($V_{\\text{out}}$):\n$$\\frac{v_{\\text{out}}}{r_{o1}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_{o2}} - (g_{m2} + g_{mb2})v_{\\text{in}} = 0$$\n\nSolving for $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{1 + (g_{m2} + g_{mb2})r_{o2}}{r_{o1} + r_{o2}} r_{o1} = \\left( g_{m2} + g_{mb2} + \\frac{1}{r_{o2}} \\right) (r_{o1} \\parallel r_{o2})$$\n\nIf $r_{o2} \\gg \\frac{1}{g_{m2} + g_{mb2}}$:\n$$A_v \\approx (g_{m2} + g_{mb2})(r_{o1} \\parallel r_{o2})$$\n\n> **Note:** The voltage gain is **positive**, meaning the common-gate amplifier is **non-inverting** (output is in phase with input).\n\n---\n\n#### **B. Input Impedance ($R_{\\text{in}}$)**\nLooking into the source of $M_2$ with the load resistance $R_L = r_{o1}$:\n$$R_{\\text{in}} = \\frac{r_{o1} + r_{o2}}{1 + (g_{m2} + g_{mb2})r_{o2}}$$\n\nFor $r_{o2} \\gg r_{o1}$:\n$$R_{\\text{in}} \\approx \\frac{1}{g_{m2} + g_{mb2}} + \\frac{r_{o1}}{(g_{m2} + g_{mb2})r_{o2}} \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n\n* The stage exhibits a **very low input impedance**.\n\n---\n\n#### **C. Output Impedance ($R_{\\text{out}}$)**\nLooking into the output node $V_{\\text{out}}$ (assuming an ideal voltage source at the input with $R_S = 0$):\n* Looking up into $M_1$: $R_{\\text{up}} = r_{o1}$\n* Looking down into $M_2$: $R_{\\text{down}} = r_{o2}$\n\n$$R_{\\text{out}} = r_{o1} \\parallel r_{o2}$$\n\n---\n\n### **4. Key Features and Applications**\n\n| Parameter | Characteristic |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | Moderate to High, **Non-Inverting** |\n| **Input Impedance ($R_{\\text{in}}$)** | **Low** ($\\approx 1/g_m$) |\n| **Output Impedance ($R_{\\text{out}}$)** | **High** ($r_{o1} \\parallel r_{o2}$) |\n| **Frequency Response** | **Superior at high frequencies** (no Miller effect on $C_{gd}$ because the gate is at AC ground) |\n\n* **Applications:**\n  1. **RF Front-Ends:** Used as a low-noise amplifier (LNA) stage where input matching to a standard $50\\,\\Omega$ source is required.\n  2. **Current Buffer:** Receives current at a low-impedance input and delivers it to a high-impedance load.\n  3. **Cascode Stages:** Used as the upper transistor in cascode amplifiers to boost output resistance and bandwidth.",
        "format": "markdown",
        "sha256": "f89ac12adffb582378dc992f58dd6834f06d335934d8fdc96789c36308d13266"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, and gives the non-inverting gain and low input resistance. Its gain expression is equivalent to the golden result, with body effect included; the extra details do not contradict the essential analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3707,
        "total_tokens": 4817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3707,
        "total_tokens": 4817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **1. Circuit Identification**\nThe circuit is a **Common-Gate (CG) Amplifier with an Active PMOS Current-Source Load**.\n\n* **Amplifying Transistor ($M_2$):** NMOS transistor in a common-gate configuration.\n  * **Input ($V_{\\text{in}}$):** Applied to the source terminal.\n  * **Gate:** Biased at a constant DC voltage $V_{b1}$ (small-signal AC ground).\n  * **Output ($V_{\\text{out}}$):** Taken from the drain terminal.\n* **Active Load ($M_1$):** PMOS transistor configured as a current source.\n  * **Source:** Connected to $V_{DD}$.\n  * **Gate:** Biased at a constant DC voltage $V_{b2}$.\n  * **Drain:** Connected to the output node ($V_{\\text{out}}$).\n\n---\n\n### **2. DC Biasing and Saturation Conditions**\nFor linear amplification, both transistors must operate in the **saturation region**:\n\n1. **For $M_1$ (PMOS Load):**\n   * Condition for channel inversion:\n     $$V_{DD} - V_{b2} > |V_{THP}|$$\n   * Saturation condition ($V_{SD1} \\ge V_{SG1} - |V_{THP}|$):\n     $$V_{\\text{out}} \\le V_{b2} + |V_{THP}|$$\n\n2. **For $M_2$ (NMOS Input Device):**\n   * Condition for channel inversion:\n     $$V_{b1} - V_{\\text{in,DC}} > V_{THN}$$\n   * Saturation condition ($V_{DS2} \\ge V_{GS2} - V_{THN}$):\n     $$V_{\\text{out}} \\ge V_{b1} - V_{THN}$$\n\n3. **Allowable Output Voltage Swing:**\n   $$V_{b1} - V_{THN} \\le V_{\\text{out}} \\le V_{b2} + |V_{THP}|$$\n\n---\n\n### **3. Small-Signal Analysis**\n\nLet:\n* $g_{m1}, g_{m2}$ = transconductance of $M_1$ and $M_2$\n* $g_{mb2}$ = body-effect transconductance of $M_2$\n* $r_{o1}, r_{o2}$ = small-signal output resistance (channel-length modulation) of $M_1$ and $M_2$\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\nApplying KCL at the output node $V_{\\text{out}}$ with the gate of $M_2$ and gate of $M_1$ at AC ground:\n\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{1 + (g_{m2} + g_{mb2})r_{o2}}{r_{o1} + r_{o2}} r_{o1}$$\n\n* If $(g_{m2} + g_{mb2})r_{o2} \\gg 1$:\n  $$A_v \\approx (g_{m2} + g_{mb2}) (r_{o1} \\parallel r_{o2})$$\n\n* If channel-length modulation is neglected ($r_{o2} \\to \\infty$):\n  $$A_v \\approx (g_{m2} + g_{mb2}) r_{o1}$$\n\n> **Key Observation:** The gain is **positive** (non-inverting), meaning $V_{\\text{out}}$ is in phase with $V_{\\text{in}}$.\n\n---\n\n#### **B. Input Resistance ($R_{\\text{in}}$)**\nLooking into the source of $M_2$ with the load resistance $R_L = r_{o1}$:\n\n$$R_{\\text{in}} = \\frac{r_{o1} + r_{o2}}{1 + (g_{m2} + g_{mb2})r_{o2}}$$\n\n* For typical values where $(g_{m2} + g_{mb2})r_{o2} \\gg 1$:\n  $$R_{\\text{in}} \\approx \\frac{1}{g_{m2} + g_{mb2}} + \\frac{r_{o1}}{(g_{m2} + g_{mb2})r_{o2}}$$\n\n* If $r_{o2} \\to \\infty$:\n  $$R_{\\text{in}} \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n\n> **Key Observation:** The input resistance is **relatively low**, which is a defining characteristic of common-gate stages.\n\n---\n\n#### **C. Output Resistance ($R_{\\text{out}}$)**\nLooking into the output node $V_{\\text{out}}$:\n\n1. **Ideal source ($R_S = 0$):**\n   $$R_{\\text{out}} = r_{o1} \\parallel r_{o2}$$\n\n2. **Finite source resistance ($R_S > 0$):**\n   $$R_{\\text{out}} = r_{o1} \\parallel \\Big( r_{o2} + [1 + (g_{m2} + g_{mb2})r_{o2}] R_S \\Big)$$\n\n---\n\n### **4. Summary of Characteristics & Applications**\n\n| Parameter | Value / Property |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | Moderate to High, **Non-Inverting** ($A_v > 0$) |\n| **Input Impedance ($R_{\\text{in}}$)** | **Low** ($\\approx 1/(g_{m2} + g_{mb2})$) |\n| **Output Impedance ($R_{\\text{out}}$)** | **High** ($\\approx r_{o1} \\parallel r_{o2}$) |\n| **High-Frequency Response** | **Excellent** (No Miller effect on $C_{gd2}$) |\n\n#### **Primary Applications:**\n1. **Current Buffer:** Transmits a current from a low-impedance input to a high-impedance output.\n2. **RF / High-Frequency Amplifiers:** The absence of the Miller effect across $C_{gd2}$ provides a significantly higher bandwidth than a common-source amplifier.\n3. **Impedance Matching:** The low input impedance can be tuned to standard line impedances (e.g., $50\\,\\Omega$).",
        "format": "markdown",
        "sha256": "e9ad2b62eb7cb39e36191d2fbb8c6a0410817c5f929656a7ea88095b0df56549"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. Its gain expression is equivalent to the required result; the extra small-signal details do not contradict the topology.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 5583,
        "total_tokens": 6693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4145,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 5583,
        "total_tokens": 6693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4145,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Identification and Overview\n\nThe given circuit is a **Common-Gate (CG) Amplifier** with an **active PMOS current-source load**.\n\n* **$M_2$ (NMOS Transistor):** Operates as the core amplifying device in a **common-gate** configuration.\n  * **Gate:** Connected to a constant DC bias voltage $V_{b1}$ (acts as an AC ground).\n  * **Source:** Acts as the signal input node ($V_{\\text{in}}$).\n  * **Drain:** Connected to the output node ($V_{\\text{out}}$).\n* **$M_1$ (PMOS Transistor):** Operates as an **active current-source load**.\n  * **Source:** Tied to the supply voltage $V_{DD}$.\n  * **Gate:** Biased at a fixed DC voltage $V_{b2}$ (AC ground).\n  * **Drain:** Tied to $V_{\\text{out}}$, providing high incremental load resistance to achieve high voltage gain.\n\n---\n\n### 2. DC Biasing and Output Voltage Swing\n\nFor linear amplification, both transistors must operate in the **saturation region**:\n\n1. **NMOS Transistor ($M_2$):**\n   * Condition: $V_{GS2} > V_{TH2}$ and $V_{DS2} \\ge V_{GS2} - V_{TH2}$\n   * Drain-to-source condition yields:\n     $$V_{\\text{out}} \\ge V_{b1} - V_{TH2}$$\n\n2. **PMOS Transistor ($M_1$):**\n   * Condition: $V_{SG1} > |V_{TH1}|$ and $V_{SD1} \\ge V_{SG1} - |V_{TH1}|$\n   * Drain-to-source condition yields:\n     $$V_{\\text{out}} \\le V_{DD} - (V_{SG1} - |V_{TH1}|) = V_{b2} + |V_{TH1}|$$\n\n3. **Allowable Output Voltage Swing:**\n   $$V_{b1} - V_{TH2} \\le V_{\\text{out}} \\le V_{b2} + |V_{TH1}|$$\n\n---\n\n### 3. Small-Signal Analysis\n\nLet the small-signal parameters be:\n* $g_{m2}$, $g_{mb2}$: Transconductance and body-effect transconductance of $M_2$\n* $r_{O1}$, $r_{O2}$: Channel-length modulation resistances of $M_1$ and $M_2$\n\n---\n\n#### A. Small-Signal Voltage Gain ($A_v$)\n\nApplying KCL at the output node $V_{\\text{out}}$:\n* The small-signal current through the load $M_1$ is:\n  $$i_1 = \\frac{v_{\\text{out}}}{r_{O1}}$$\n* The small-signal current through $M_2$ (with $v_{gs2} = -v_{\\text{in}}$ and $v_{bs2} = -v_{\\text{in}}$ assuming bulk is at ground):\n  $$i_{d2} = -(g_{m2} + g_{mb2}) v_{\\text{in}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_{O2}}$$\n\nEquating $i_1 + i_{d2} = 0$:\n$$\\frac{v_{\\text{out}}}{r_{O1}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_{O2}} - (g_{m2} + g_{mb2}) v_{\\text{in}} = 0$$\n\nSolving for the voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n\n$$A_v = \\frac{\\left(g_{m2} + g_{mb2} + \\frac{1}{r_{O2}}\\right)}{\\frac{1}{r_{O1}} + \\frac{1}{r_{O2}}} = \\frac{1 + (g_{m2} + g_{mb2})r_{O2}}{r_{O1} + r_{O2}} r_{O1}$$\n\n* **Approximation:** If $(g_{m2} + g_{mb2})r_{O2} \\gg 1$:\n  $$A_v \\approx (g_{m2} + g_{mb2}) \\left(r_{O1} \\parallel r_{O2}\\right)$$\n\n> **Note:** The gain is **positive**, meaning the common-gate amplifier is **non-inverting** (in contrast to the common-source stage).\n\n---\n\n#### B. Input Resistance ($R_{\\text{in}}$)\n\nLooking into the source of $M_2$ with a load $R_L = r_{O1}$ at the drain:\n\n$$R_{\\text{in}} = \\frac{r_{O1} + r_{O2}}{1 + (g_{m2} + g_{mb2})r_{O2}}$$\n\n* **Approximation:** When $(g_{m2} + g_{mb2})r_{O2} \\gg 1$:\n  $$R_{\\text{in}} \\approx \\frac{1}{g_{m2} + g_{mb2}} + \\frac{r_{O1}}{(g_{m2} + g_{mb2})r_{O2}}$$\n* If channel-length modulation is neglected ($r_{O2} \\to \\infty$):\n  $$R_{\\text{in}} \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n\nThe amplifier exhibits a **characteristically low input impedance**.\n\n---\n\n#### C. Output Resistance ($R_{\\text{out}}$)\n\nLooking into the output node $V_{\\text{out}}$:\n* Looking up into $M_1$: $R_{\\text{up}} = r_{O1}$\n* Looking down into $M_2$ (with ideal source $R_S = 0$ at $V_{\\text{in}}$): $R_{\\text{down}} = r_{O2}$\n\n$$R_{\\text{out}} = R_{\\text{up}} \\parallel R_{\\text{down}} = r_{O1} \\parallel r_{O2}$$\n\n* **If a source resistance $R_S$ is present at the input:**\n  $$R_{\\text{down}} = r_{O2} + \\left[1 + (g_{m2} + g_{mb2})r_{O2}\\right] R_S$$\n  $$R_{\\text{out}} = r_{O1} \\parallel R_{\\text{down}}$$\n\n---\n\n### 4. Summary of Characteristics & Applications\n\n| Parameter | Ideal / Approximate Expression | Property |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $(g_{m2} + g_{mb2})(r_{O1} \\parallel r_{O2})$ | Moderate to High, **Non-inverting** |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\approx \\frac{1}{g_{m2} + g_{mb2}}$ | **Low** |\n| **Output Resistance ($R_{\\text{out}}$)** | $r_{O1} \\parallel r_{O2}$ | **High** |\n\n#### Key Advantages & Uses:\n1. **High-Frequency Performance:** Since the gate of $M_2$ is at AC ground, the gate-drain capacitance $C_{gd2}$ does not experience the **Miller effect**, leading to a substantially wider bandwidth compared to a common-source amplifier.\n2. **Current Buffer:** Acts as a high-performance current buffer due to low input impedance and high output impedance.\n3. **Impedance Matching:** Widely used in RF receivers (e.g., Low-Noise Amplifiers, LNAs) to match standard source impedances (e.g., $50\\,\\Omega$) by choosing $g_{m2} \\approx 20\\text{ mS}$.",
        "format": "markdown",
        "sha256": "14178088e6ef8e8555a58040807590024d71b424546df2aeb6129ae3c8508b30"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage with PMOS current-source load, places Vin at M2’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. Its body-effect-inclusive gain expression is equivalent to the required approximation.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 8605,
        "total_tokens": 9715,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6818,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 8605,
        "total_tokens": 9715,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6818,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\n---\n\n### **Explanation:**\n\n1. **Identify the Independent Nodes:**\n   * **Node 1 (Gate of $M_1$):** This is the input node after the source resistance $R_S$. It is connected to ground via $C_{\\text{GS}}$ and coupled to the output node via $C_{\\text{GD}}$.\n   * **Node 2 (Output Node $V_{\\text{out}}$):** This is the common drain node of $M_1$ and $M_2$. \n\n2. **AC Ground Connections:**\n   * The source, bulk, and gate of $M_2$ are connected to fixed DC potentials (DC supply and bias voltages), which act as **AC grounds**.\n   * Therefore, the capacitors $C_{\\text{GD2}}$, $C_{\\text{DB2}}$, and $C_{\\text{DB}}$ are all connected between the output node ($V_{\\text{out}}$) and AC ground. They simply combine in parallel:\n     $$C_{\\text{out, total}} = C_{\\text{DB}} + C_{\\text{GD2}} + C_{\\text{DB2}}$$\n\n3. **System Order:**\n   * Since there are only **two independent nodes** with capacitances connected to them (the gate of $M_1$ and the drain/output node $V_{\\text{out}}$), the system is of the second order.\n   * Consequently, the transfer function $\\frac{V_{\\text{out}}(s)}{V_{\\text{in}}(s)}$ contains a quadratic polynomial in the denominator, resulting in **2 poles** (along with 1 right-half-plane zero created by $C_{\\text{GD}}$).",
        "format": "markdown",
        "sha256": "c13653a63f479ba2bdc6833d798ac262c452eee0ebbc55fe78076d1450855b1b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent capacitive nodes—the M1 gate and output—and assigns the output-to-ground capacitances correctly. The two-pole conclusion is justified.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1577,
        "total_tokens": 2669,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1577,
        "total_tokens": 2669,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure has **2 poles** (and **1 zero**).\n\n---\n\n### **Explanation:**\n\n1. **Identify the independent nodes in the small-signal equivalent circuit:**\n   - **Node 1 (Gate of $M_1$):** Connected to the input through $R_S$.\n   - **Node 2 (Drain of $M_1$ / Drain of $M_2$ / $V_{\\text{out}}$):** The output node.\n   - All other terminals (sources and bulk connections of $M_1$ and $M_2$, and the gate of $M_2$) are tied to AC ground (bias voltages or ground).\n\n2. **Equivalent Capacitances:**\n   - Connected between **Node 1 and ground**: $C_{\\text{GS}}$\n   - Connected between **Node 1 and Node 2**: $C_{\\text{GD}}$\n   - Connected between **Node 2 and ground**: $C_{\\text{DB}} + C_{\\text{DB2}} + C_{\\text{GD2}}$ (these three capacitors are in parallel to AC ground).\n\n3. **Number of Poles:**\n   - Since there are only **2 independent nodes** that can store energy (hold dynamic state voltages), applying Kirchhoff's Current Law (KCL) yields a system of two coupled first-order differential equations.\n   - The resulting transfer function $\\frac{V_{\\text{out}}(s)}{V_{\\text{in}}(s)}$ has a **second-order denominator** ($D(s) = 1 + as + bs^2$).\n\nTherefore, the circuit has **2 poles**.",
        "format": "markdown",
        "sha256": "11b99c267888fefb0077d0e97b7132f912509be03d45a21b9eb4f66fd06feff0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the gate and output as the two dynamic nodes and assigns the capacitances to the appropriate nodes; the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1714,
        "total_tokens": 2806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1360,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1714,
        "total_tokens": 2806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1360,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\n---\n\n### **Detailed Explanation:**\n\n1. **Identify the Independent Nodes (Capacitive Nodes):**\n   * **Node 1 (Gate of $M_1$):** Connected to the input through $R_S$, to ground via $C_{\\text{GS}}$, and to the output node via $C_{\\text{GD}}$.\n   * **Node 2 (Drain of $M_1$ / Output Node $V_{\\text{out}}$):** \n     * The drain-to-bulk capacitance $C_{\\text{DB}}$ connects to ground.\n     * The gate and bulk/source of $M_2$ are connected to AC ground. Therefore, $C_{\\text{GD2}}$ and $C_{\\text{DB2}}$ both connect between the output node and AC ground.\n     * These three parallel capacitances can be lumped into a single equivalent load capacitance to ground:\n       $$C_L = C_{\\text{DB}} + C_{\\text{GD2}} + C_{\\text{DB2}}$$\n\n2. **Order of the System:**\n   * There are only **2 independent nodes** with capacitance to ground/each other (the gate node of $M_1$ and the output node $V_{\\text{out}}$).\n   * The bridging capacitor $C_{\\text{GD}}$ connects these two nodes together.\n   * Applying Kirchhoff's Current Law (KCL) at these two nodes yields a system of two coupled first-order differential equations, which gives a transfer function with a second-order denominator in the Laplace domain ($s^2$ term).\n\n3. **Conclusion:**\n   * A second-order denominator means the circuit has **2 poles** (along with 1 right-half-plane zero created by $C_{\\text{GD}}$).",
        "format": "markdown",
        "sha256": "aedc2e58ad7cfa2a601a0f6b8583bf09afc44a2f24dca6e92d1e6ee75e9a1b07"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two capacitive nodes—the M1 gate and output—and assigns the grounded capacitances to the output while treating M1’s CGD as a bridge. The two-pole conclusion is justified.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1492,
        "total_tokens": 2584,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1103,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1492,
        "total_tokens": 2584,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1103,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Common-Source (CS) amplifier with a composite/series-connected NMOS pair ($M_1$ and $M_2$)** driving a resistive load $R_D$. Both gates are tied together to the input signal $V_{\\text{in}}$.\n\n---\n\n### 1. DC and Large-Signal Analysis\n\n#### **Operating Regions of $M_1$ and $M_2$**\nLet $V_X$ be the voltage at the intermediate node (the drain of $M_1$ and source of $M_2$).\n\n1. **Cutoff ($V_{\\text{in}} < V_{TH}$):**\n   * If $V_{\\text{in}} < V_{TH1}$, $M_1$ is OFF. No current flows ($I_D = 0$), and $V_{\\text{out}} = V_{DD}$.\n\n2. **Conduction ($V_{\\text{in}} > V_{TH}$):**\n   * The gate voltages are equal: $V_{G1} = V_{G2} = V_{\\text{in}}$.\n   * The source of $M_1$ is grounded: $V_{S1} = 0 \\implies V_{GS1} = V_{\\text{in}}$.\n   * The source of $M_2$ is at $V_X > 0 \\implies V_{GS2} = V_{\\text{in}} - V_X < V_{GS1}$.\n   * Since the same current flows through both devices ($I_{D1} = I_{D2}$):\n     * $M_1$ has a **higher gate overdrive** $(V_{GS1} - V_{TH})$ than $M_2$.\n     * Therefore, to carry the same current as $M_2$, $M_1$ must operate with a very small drain-source voltage ($V_{DS1} = V_X < V_{GS1} - V_{TH1}$), which forces **$M_1$ into the triode (linear) region**.\n     * Meanwhile, **$M_2$ operates in saturation** as long as $V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH2}$.\n\n---\n\n### 2. Equivalent Transistor Concept\n\nTwo series MOSFETs sharing the same gate connection are mathematically and physically equivalent to a **single MOSFET with combined channel length**:\n\n$$\\left(\\frac{W}{L}\\right)_{\\text{eq}} = \\frac{1}{\\frac{1}{(W/L)_1} + \\frac{1}{(W/L)_2}}$$\n\nIf both transistors have the same channel width $W$:\n$$L_{\\text{eq}} = L_1 + L_2$$\n\nThus, the drain current in saturation is:\n$$I_D = \\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L_1 + L_2}\\right)(V_{\\text{in}} - V_{TH})^2$$\n\n---\n\n### 3. Small-Signal Analysis\n\n#### **A. Effective Transconductance ($G_m$)**\nShorting the output to AC ground ($v_{\\text{out}} = 0$) and applying KCL at node $X$:\n\n1. Current through $M_1$ (in triode):\n   $$i_{d1} = g_{m1} v_{\\text{in}} + g_{ds1} v_x$$\n   *(where $g_{ds1} = 1/r_{ds1}$ is the channel conductance of $M_1$)*\n\n2. Current through $M_2$ (in saturation):\n   $$i_{d2} = g_{m2}(v_{\\text{in}} - v_x) - g_{mb2} v_x$$\n\nEquating $i_{d1} = i_{d2} = i_{\\text{out}}$ and eliminating $v_x$:\n$$v_x = \\frac{g_{m2} - g_{m1}}{g_{ds1} + g_{m2} + g_{mb2}} v_{\\text{in}}$$\n\nSubstituting $v_x$ back into the current equation gives the overall transconductance:\n$$G_m = \\frac{i_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m2} g_{ds1} + g_{m1}(g_{m2} + g_{mb2})}{g_{ds1} + g_{m2} + g_{mb2}}$$\n\nNeglecting body effect ($g_{mb2} \\approx 0$):\n$$G_m = \\frac{g_{m2}(g_{m1} + g_{ds1})}{g_{ds1} + g_{m2}} = \\mu_n C_{ox} \\left(\\frac{W}{L_1 + L_2}\\right)(V_{\\text{in}} - V_{TH}) = g_{m,\\text{eq}}$$\n\n---\n\n#### **B. Output Resistance ($R_{\\text{out}}$)**\nSetting $v_{\\text{in}} = 0$ to find the output resistance looking into the drain of $M_2$:\n* The gate of $M_1$ is at AC ground, so $M_1$ acts as a resistance $r_{ds1} = 1/g_{ds1}$.\n* $M_2$ acts as a source-degenerated transistor with resistance $r_{ds1}$ at its source:\n\n$$R_{\\text{out,dev}} \\approx r_{O2} + r_{ds1} + (g_{m2} + g_{mb2}) r_{O2} r_{ds1}$$\n\nIncluding the load resistor $R_D$:\n$$R_{\\text{out}} = R_D \\parallel R_{\\text{out,dev}} \\approx R_D \\quad (\\text{since } R_{\\text{out,dev}} \\gg R_D)$$\n\n---\n\n#### **C. Voltage Gain ($A_v$)**\nThe small-signal voltage gain is:\n$$A_v = -G_m R_{\\text{out}} \\approx -g_{m,\\text{eq}} R_D = -\\mu_n C_{ox} \\left(\\frac{W}{L_1 + L_2}\\right)(V_{\\text{in}} - V_{TH}) R_D$$\n\n---\n\n### 4. Summary of Key Characteristics\n\n| Parameter | Expression |\n| :--- | :--- |\n| **Operating State** | $M_1$ in **Triode**, $M_2$ in **Saturation** |\n| **Effective Aspect Ratio** | $\\left(\\frac{W}{L}\\right)_{\\text{eq}} = \\frac{W}{L_1 + L_2}$ (for equal $W$) |\n| **Transconductance ($G_m$)** | $g_{m,\\text{eq}} = \\mu_n C_{ox}\\left(\\frac{W}{L_1 + L_2}\\right)(V_{\\text{in}} - V_{TH})$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $R_D \\parallel \\left[r_{O2} + r_{ds1} + (g_{m2} + g_{mb2}) r_{O2} r_{ds1}\\right] \\approx R_D$ |\n| **Small-Signal Gain ($A_v$)** | $\\approx -g_{m,\\text{eq}} R_D$ |\n\n* **Layout Note:** This configuration is frequently used in IC design to implement non-standard, long-channel devices or split-length transistor layouts without creating specialized layout cells.",
        "format": "markdown",
        "sha256": "4582c35159e053dcd017c0c2ada0bea815b0edcb58cfb16570172d793725543d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS pair, with M1 in triode and M2 in saturation, and gives the key result that the pair acts approximately like a longer-channel device with effective length L1 + L2 for equal widths. The additional small-signal analysis uses standard long-channel approximations and does not undermine that conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 6804,
        "total_tokens": 7922,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 6804,
        "total_tokens": 7922,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive DC and small-signal analysis of the given circuit.\n\n---\n\n### **1. Circuit Overview**\n\nThe circuit is a **Common-Source (CS) amplifier with a resistive load ($R_D$)**, where the pull-down device consists of two series-stacked NMOS transistors ($M_1$ and $M_2$) with their gates tied together to the input signal $V_{\\text{in}}$.\n\n* **$M_1$ (Bottom transistor):** Source is connected to Ground ($0\\text{ V}$), Gate is connected to $V_{\\text{in}}$, Drain is connected to node $X$ (intermediate node).\n* **$M_2$ (Top transistor):** Source is connected to node $X$, Gate is connected to $V_{\\text{in}}$, Drain is connected to the output node $V_{\\text{out}}$.\n\n---\n\n### **2. DC Operating Regions (Large-Signal Analysis)**\n\nLet the intermediate node voltage be $V_X$ and assume both transistors have identical threshold voltages $V_{TH1} = V_{TH2} = V_{TH}$ (neglecting body effect initially).\n\n#### **A. Cutoff Region ($V_{\\text{in}} < V_{TH}$)**\n* If $V_{\\text{in}} < V_{TH}$, $V_{GS1} = V_{\\text{in}} < V_{TH}$, so $M_1$ is OFF.\n* No current flows through the branch: $I_D = 0$.\n* Output voltage:\n  $$V_{\\text{out}} = V_{DD}$$\n\n---\n\n#### **B. Conduction Region ($V_{\\text{in}} > V_{TH}$)**\n\nFor a current $I_D > 0$ to flow through both transistors:\n1. $M_1$ has $V_{GS1} = V_{\\text{in}}$ and $V_{DS1} = V_X$.\n2. $M_2$ has $V_{GS2} = V_{\\text{in}} - V_X$ and $V_{DS2} = V_{\\text{out}} - V_X$.\n\n> **Crucial Insight: Operating Mode of $M_1$ and $M_2$**\n> * For $M_2$ to conduct, its gate-to-source voltage must exceed the threshold:\n>   $$V_{GS2} = V_{\\text{in}} - V_X > V_{TH} \\implies V_X < V_{\\text{in}} - V_{TH}$$\n> * For $M_1$, the condition for saturation is $V_{DS1} \\ge V_{GS1} - V_{TH}$, which translates to:\n>   $$V_X \\ge V_{\\text{in}} - V_{TH}$$\n> * Since $V_X < V_{\\text{in}} - V_{TH}$ is required for $M_2$ to be ON, **$M_1$ cannot be in saturation**. \n> * Therefore, **$M_1$ operates in the triode (linear) region**, and **$M_2$ operates in saturation** (provided $V_{\\text{out}} - V_X \\ge V_{GS2} - V_{TH}$).\n\n---\n\n### **3. Equivalent Single Transistor Model**\n\nAssuming both transistors have the same channel width $W$ and channel lengths $L_1$ and $L_2$:\n\n1. **Current through $M_1$ (Triode region):**\n   $$I_D = \\mu_n C_{ox} \\frac{W}{L_1} \\left[ (V_{\\text{in}} - V_{TH})V_X - \\frac{1}{2}V_X^2 \\right]$$\n   $$\\implies \\frac{I_D L_1}{\\mu_n C_{ox} W} = (V_{\\text{in}} - V_{TH})V_X - \\frac{1}{2}V_X^2 \\quad \\text{--- (Eq. 1)}$$\n\n2. **Current through $M_2$ (Saturation region):**\n   $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L_2} (V_{GS2} - V_{TH})^2 = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L_2} (V_{\\text{in}} - V_X - V_{TH})^2$$\n   $$\\implies \\frac{I_D L_2}{\\mu_n C_{ox} W} = \\frac{1}{2} (V_{\\text{in}} - V_{TH})^2 - (V_{\\text{in}} - V_{TH})V_X + \\frac{1}{2}V_X^2 \\quad \\text{--- (Eq. 2)}$$\n\n3. **Adding Eq. 1 and Eq. 2:**\n   $$\\frac{I_D (L_1 + L_2)}{\\mu_n C_{ox} W} = \\frac{1}{2}(V_{\\text{in}} - V_{TH})^2$$\n\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L_1 + L_2}\\right) (V_{\\text{in}} - V_{TH})^2$$\n\n> **Conclusion:** The composite structure of $M_1$ and $M_2$ behaves identically to a **single equivalent transistor** $M_{eq}$ operating in saturation with an effective channel length of:\n> $$L_{\\text{eq}} = L_1 + L_2$$\n\n---\n\n### **4. Small-Signal Analysis & Voltage Gain**\n\n#### **A. Effective Transconductance ($G_m$)**\nDifferentiating the equivalent drain current with respect to $V_{\\text{in}}$:\n$$G_m = \\frac{\\partial I_D}{\\partial V_{\\text{in}}} = \\mu_n C_{ox} \\left(\\frac{W}{L_1 + L_2}\\right) (V_{\\text{in}} - V_{TH})$$\n\n#### **B. Voltage Gain ($A_v$)**\nNeglecting channel-length modulation ($\\lambda = 0$):\n$$V_{\\text{out}} = V_{DD} - I_D R_D$$\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -G_m R_D = -\\mu_n C_{ox} \\left(\\frac{W}{L_1 + L_2}\\right) (V_{\\text{in}} - V_{TH}) R_D$$\n\nIf channel-length modulation ($r_{o1}, r_{o2}$) is considered:\n$$A_v = -G_m (R_D \\parallel R_{\\text{out}})$$\nwhere $R_{\\text{out}}$ is the output impedance looking into the drain of $M_2$:\n$$R_{\\text{out}} \\approx r_{o2} + r_{o1} + (g_{m2} + g_{mb2}) r_{o2} r_{o1} \\approx g_{m2} r_{o2} r_{o1}$$\n\n---\n\n### **5. Second-Order Effects**\n\n1. **Body Effect on $M_2$:**\n   * The substrate/body of $M_2$ is tied to Ground, while its source is at $V_X > 0$.\n   * As a result, $V_{SB2} = V_X > 0$, which increases the threshold voltage of $M_2$:\n     $$V_{TH2} = V_{TH0} + \\gamma \\left(\\sqrt{2\\phi_F + V_X} - \\sqrt{2\\phi_F}\\right)$$\n   * This slightly reduces the effective $G_m$ and current $I_D$.\n\n---\n\n### **Summary Table**\n\n| Parameter / Feature | Expression / State |\n| :--- | :--- |\n| **Operating State of $M_1$** | **Triode (Linear)** |\n| **Operating State of $M_2$** | **Saturation** |\n| **Equivalent Channel Length** | $L_{\\text{eq}} = L_1 + L_2$ |\n| **Overall Transconductance ($G_m$)** | $\\mu_n C_{ox} \\left(\\frac{W}{L_1 + L_2}\\right)(V_{\\text{in}} - V_{TH})$ |\n| **Small-Signal Gain ($A_v$)** | $-G_m R_D$ (Ideal) |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\approx g_{m2} r_{o2} r_{o1}$ (significantly higher than a single MOSFET) |",
        "format": "markdown",
        "sha256": "158e0cd95f9ef91769bb6869797ff1faba102959bb094d788cc54d8cb797f8ec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies M1 as triode, M2 as saturated, and derives the key effective channel length of L1 + L2. However, it incorrectly gives a cascode-like output resistance gm2·ro2·ro1; M1 is in triode, so the output-resistance increase is much more modest.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 5527,
        "total_tokens": 6645,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 5527,
        "total_tokens": 6645,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Overview and Topology\n\nThe given circuit is a **Common-Source (CS) amplifier with a resistive load ($R_D$)**, where the pulling-down transistor is replaced by two series-stacked NMOS transistors ($M_1$ and $M_2$) whose **gates are tied together** to the common input $V_{\\text{in}}$.\n\n* **$M_1$ (Bottom transistor):** Gate connected to $V_{\\text{in}}$, Source connected to Ground ($0\\text{ V}$), Drain connected to node $X$ (Source of $M_2$).\n* **$M_2$ (Top transistor):** Gate connected to $V_{\\text{in}}$, Source connected to node $X$, Drain connected to the output node $V_{\\text{out}}$.\n* **$R_D$:** Pull-up load resistor connected between the supply rail $V_{DD}$ and $V_{\\text{out}}$.\n\nThis configuration is known as a **composite transistor** (or series-MOS pair).\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nLet the intermediate node between $M_1$ and $M_2$ have voltage $V_X$.\n\n#### Operating Regions:\n1. **Cut-off Region ($V_{\\text{in}} < V_{TH}$):**\n   * Both transistors are OFF ($I_D = 0$).\n   * $V_{\\text{out}} = V_{DD}$.\n\n2. **Active Amplification Region ($V_{\\text{in}} > V_{TH}$ and $V_{\\text{out}}$ sufficiently high):**\n   * For both transistors, gate voltages are equal: $V_{G1} = V_{G2} = V_{\\text{in}}$.\n   * Since $V_X > 0$, the gate-to-source voltages satisfy:\n     $$V_{GS1} = V_{\\text{in}} \\quad > \\quad V_{GS2} = V_{\\text{in}} - V_X$$\n   * Since both transistors carry the exact same current ($I_{D1} = I_{D2}$):\n     * **$M_1$ operates in the Triode (Linear) Region** (because its overdrive is larger).\n     * **$M_2$ operates in the Saturation Region** (provided $V_{\\text{out}} - V_X \\ge V_{GS2} - V_{TH} \\implies V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH}$).\n\n---\n\n### 3. Equivalent Transistor Derivation\n\nAssuming identical threshold voltages ($V_{TH1} \\approx V_{TH2} = V_{TH}$) and widths $W_1 = W_2 = W$, with lengths $L_1$ and $L_2$:\n\n1. **For $M_1$ in Triode:**\n   $$I_D = \\mu_n C_{ox} \\frac{W}{L_1} \\left[ (V_{\\text{in}} - V_{TH}) V_X - \\frac{1}{2} V_X^2 \\right]$$\n\n2. **For $M_2$ in Saturation:**\n   $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L_2} (V_{\\text{in}} - V_X - V_{TH})^2$$\n\nMultiplying the equations by $L_1$ and $L_2$ respectively and summing them:\n$$(L_1 + L_2) I_D = \\frac{1}{2} \\mu_n C_{ox} W \\left[ 2(V_{\\text{in}} - V_{TH}) V_X - V_X^2 + (V_{\\text{in}} - V_{TH} - V_X)^2 \\right]$$\n\nExpanding the terms inside the brackets:\n$$2(V_{\\text{in}} - V_{TH}) V_X - V_X^2 + (V_{\\text{in}} - V_{TH})^2 - 2(V_{\\text{in}} - V_{TH}) V_X + V_X^2 = (V_{\\text{in}} - V_{TH})^2$$\n\nThus:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L_1 + L_2}\\right) (V_{\\text{in}} - V_{TH})^2$$\n\n#### Key Result:\nThe pair $M_1$ and $M_2$ is **electrically equivalent to a single NMOS transistor** $M_{eq}$ with:\n* Effective Channel Length: $L_{eq} = L_1 + L_2$\n* Aspect Ratio:\n  $$\\left(\\frac{W}{L}\\right)_{eq} = \\frac{1}{\\frac{1}{(W/L)_1} + \\frac{1}{(W/L)_2}} = \\frac{(W/L)_1 (W/L)_2}{(W/L)_1 + (W/L)_2}$$\n\nThe DC output voltage is:\n$$V_{\\text{out}} = V_{DD} - I_D R_D = V_{DD} - \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_{eq} (V_{\\text{in}} - V_{TH})^2 R_D$$\n\n---\n\n### 4. Small-Signal Analysis & Voltage Gain\n\n#### Equivalent Transconductance ($G_m$):\nThe overall transconductance of the composite pair is:\n$$G_m = g_{m,eq} = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_{eq} (V_{\\text{in}} - V_{TH}) = \\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_{eq} I_D}$$\n\n#### Small-Signal Voltage Gain ($A_v$):\n* **Ideal case (neglecting channel length modulation $\\lambda = 0$):**\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = - G_m R_D = - g_{m,eq} R_D$$\n\n* **Considering channel length modulation and finite output impedance:**\n  The output resistance of the composite pair looking into the drain of $M_2$ is higher than a single transistor due to the degenerating effect of $M_1$:\n  $$R_{out, \\text{device}} \\approx r_{o2} + r_{on1} + (g_{m2} + g_{mb2}) r_{o2} r_{on1}$$\n  The total small-signal gain becomes:\n  $$A_v = - G_m \\left( R_D \\parallel R_{out, \\text{device}} \\right)$$\n\n---\n\n### 5. Summary & Practical Application\n\n| Parameter / Feature | Value / Characteristic |\n| :--- | :--- |\n| **Equivalent Aspect Ratio** | $(W/L)_{eq} = \\frac{(W/L)_1 (W/L)_2}{(W/L)_1 + (W/L)_2}$ |\n| **Small-Signal Gain** | $A_v \\approx - g_{m,eq} R_D$ |\n| **Operating State** | $M_1$ is in **Triode**, $M_2$ is in **Saturation** |\n| **Primary Uses** | 1. Implementing long-channel devices ($L_{eq} = L_1 + L_2$) without violating DRC (Design Rule Checks) in IC layout.<br>2. Improving breakdown voltage / reliability by distributing $V_{DS}$ stress across two devices. |",
        "format": "markdown",
        "sha256": "afc90e6900fb809680995000eb362eb4288133538452bfff51f5760466cdf07a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS pair, with M1 in triode and M2 saturated, and derives the effective channel length and aspect ratio. Its output-resistance discussion is consistent with the composite-device behavior.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 6831,
        "total_tokens": 7949,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 6831,
        "total_tokens": 7949,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed analysis of the given circuit:\n\n---\n\n### **1. Circuit Description and Topology**\nThe circuit is a **single-ended differential amplifier** configured as a **non-inverting amplifier**. It can also be viewed as a cascade of two basic stages:\n1. **$M_1$ (Source Follower / Common-Drain Stage):** The input $V_{\\text{in}}$ is applied to the gate of $M_1$, whose drain is connected to $V_{DD}$.\n2. **$M_2$ (Common-Gate Stage):** The source of $M_2$ is driven by the source of $M_1$, its gate is held at an AC ground (DC bias voltage $V_b$), and the output $V_{\\text{out}}$ is taken from its drain through the load resistor $R_D$.\n3. **Tail Current Source ($I_1$):** Provides the total DC bias current for the differential pair:\n   $$I_{D1} + I_{D2} = I_1$$\n\n---\n\n### **2. Qualitative (Large-Signal) Operation**\n\n* **Quiescent (DC) Point:**\n  When $V_{\\text{in}} = V_b$, the circuit is symmetric:\n  $$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n  The DC output voltage is:\n  $$V_{\\text{out, DC}} = V_{DD} - \\frac{I_1}{2} R_D$$\n\n* **Response to Changes in $V_{\\text{in}}$:**\n  * When $V_{\\text{in}}$ increases, the common-source node voltage $V_S$ also increases (due to source-follower action of $M_1$).\n  * Since $V_b$ is constant, an increase in $V_S$ reduces the gate-to-source voltage of $M_2$ ($V_{GS2} = V_b - V_S$).\n  * A smaller $V_{GS2}$ reduces the current $I_{D2}$ flowing through $M_2$.\n  * As $I_{D2}$ decreases, the voltage drop across $R_D$ decreases, causing $V_{\\text{out}}$ to **increase**:\n    $$V_{\\text{out}} = V_{DD} - I_{D2} R_D \\uparrow$$\n  * Thus, the circuit provides a **positive (non-inverting) voltage gain**.\n\n---\n\n### **3. Small-Signal Analysis**\n\nAssuming matched transistors ($M_1 \\equiv M_2$) biased at the same current such that $g_{m1} = g_{m2} = g_m$, and neglecting channel-length modulation ($\\lambda = 0$) and body effect ($\\gamma = 0$):\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\n1. **Source Node Voltage ($v_s$):**\n   * Looking into the source of $M_2$, the resistance is $1/g_{m2} = 1/g_m$.\n   * $M_1$ acts as a source follower loaded by the source resistance of $M_2$:\n     $$v_s = v_{\\text{in}} \\left( \\frac{\\frac{1}{g_{m2}}}{\\frac{1}{g_{m1}} + \\frac{1}{g_{m2}}} \\right) = \\frac{1}{2} v_{\\text{in}}$$\n\n2. **Output Voltage ($v_{\\text{out}}$):**\n   * Transistor $M_2$ acts as a common-gate stage:\n     $$i_{d2} = -g_{m2} v_s = -g_m \\left(\\frac{1}{2} v_{\\text{in}}\\right)$$\n   * The small-signal output voltage is:\n     $$v_{\\text{out}} = -i_{d2} R_D = -\\left(-\\frac{1}{2} g_m v_{\\text{in}}\\right) R_D = +\\frac{1}{2} g_m R_D v_{\\text{in}}$$\n\n3. **Gain Formula:**\n   $$\\boxed{A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = +\\frac{1}{2} g_m R_D}$$\n\n*(Note: The factor of $\\frac{1}{2}$ arises because the input voltage is divided equally across the two source resistances $1/g_{m1}$ and $1/g_{m2}$.)*\n\n---\n\n#### **B. Input and Output Impedance**\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  Since the input goes directly to the insulated MOS gate:\n  $$R_{\\text{in}} \\to \\infty \\quad (\\text{at low frequencies})$$\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  Looking into the $V_{\\text{out}}$ node:\n  $$R_{\\text{out}} \\approx R_D$$\n  *(If including transistor output resistance $r_o$, $R_{\\text{out}} = R_D \\parallel [r_{o2} + (1 + g_{m2} r_{o2})(r_{o1} \\parallel r_{\\text{tail}})] \\approx R_D$)*\n\n---\n\n### **4. Key Features and Advantages**\n\n1. **Non-Inverting Amplification:** Unlike a standard Common-Source (CS) amplifier, this topology provides a non-inverting gain without needing a secondary inverting stage.\n2. **High-Frequency Performance (No Miller Effect):** \n   * $M_1$ has its drain connected to $V_{DD}$ (AC ground), so $C_{gd1}$ does not suffer from the Miller multiplication effect.\n   * $M_2$ is a Common-Gate amplifier, which naturally has low input impedance and no Miller multiplication of $C_{gd2}$.\n   * Therefore, this topology achieves a **wide bandwidth**.\n3. **High Input Impedance:** Preserves signal integrity from high-impedance sources.",
        "format": "markdown",
        "sha256": "03e0aee041539f0ca4afb071280baa2a2f45a7fcf96b0de33515c197aebca613"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower driving a common-gate stage (equivalently, a source-coupled pair), with M2 biased at Vb and output at its drain. Its non-inverting gain is also correct under the stated assumptions; the extra impedance discussion is not central.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3043,
        "total_tokens": 4153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1692,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3043,
        "total_tokens": 4153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1692,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Overview & Classification\nThe circuit is a **single-ended differential amplifier** (source-coupled pair) configured as a **non-inverting amplifier**.\n\n* **$M_1$ and $M_2$:** NMOS differential pair transistors.\n* **$I_1$:** Tail current source providing DC bias.\n* **$V_{\\text{in}}$:** Input signal applied to the gate of $M_1$.\n* **$V_b$:** Fixed DC bias voltage (AC ground) applied to the gate of $M_2$.\n* **$R_D$:** Load resistor connected to the drain of $M_2$.\n* **$V_{\\text{out}}$:** Output taken from the drain of $M_2$.\n* **Drain of $M_1$:** Tied directly to $V_{DD}$ (AC ground).\n\n---\n\n### 2. Large-Signal (DC) Characteristics\n\n1. **Equilibrium ($V_{\\text{in}} = V_b$):**\n   * If $M_1$ and $M_2$ are matched, the tail current splits equally:\n     $$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n   * The DC output voltage is:\n     $$V_{\\text{out, DC}} = V_{DD} - \\frac{I_1 R_D}{2}$$\n   * The common-source node voltage $V_S$ is:\n     $$V_S = V_b - V_{GS2} = V_{\\text{in}} - V_{GS1}$$\n\n2. **Large Signal Limits:**\n   * **When $V_{\\text{in}} \\gg V_b$:** $M_1$ draws the entire current $I_1$, turning $M_2$ **OFF** ($I_{D2} = 0$).  \n     $$\\implies V_{\\text{out}} = V_{DD}$$\n   * **When $V_{\\text{in}} \\ll V_b$:** $M_1$ turns **OFF**, and $M_2$ conducts the entire current $I_1$.  \n     $$\\implies V_{\\text{out}} = V_{DD} - I_1 R_D$$\n\n---\n\n### 3. Small-Signal Analysis (Voltage Gain)\n\nAssuming the transistors operate in saturation, neglecting channel-length modulation ($\\lambda = 0$) and body effect ($\\gamma = 0$):\n\n#### A. Node Equation at the Common Source:\nLet $v_s$ be the small-signal voltage at the common source node. The sum of small-signal currents at this node must be zero (assuming an ideal tail current source with infinite impedance):\n$$i_{d1} + i_{d2} = 0$$\n\n$$g_{m1}(v_{\\text{in}} - v_s) + g_{m2}(0 - v_s) = 0$$\n\nSolving for $v_s$:\n$$v_s = \\frac{g_{m1}}{g_{m1} + g_{m2}} v_{\\text{in}}$$\n\n#### B. Output Voltage:\nThe small-signal current through $M_2$ is:\n$$i_{d2} = g_{m2}(v_{g2} - v_s) = -g_{m2} v_s = -\\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} v_{\\text{in}}$$\n\nThe output voltage is:\n$$v_{\\text{out}} = -i_{d2} R_D = +\\left( \\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} R_D \\right) v_{\\text{in}}$$\n\n#### C. Small-Signal Voltage Gain ($A_v$):\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} R_D$$\n\nIf the transistors are identical and biased with the same current ($g_{m1} = g_{m2} = g_m$):\n$$A_v = +\\frac{1}{2} g_m R_D$$\n\n> **Note:** The positive sign indicates that the amplifier is **non-inverting** (as $V_{\\text{in}} \\uparrow$, $V_S \\uparrow \\implies V_{GS2} \\downarrow \\implies I_{D2} \\downarrow \\implies V_{\\text{out}} \\uparrow$).\n\n---\n\n### 4. Alternative Perspective: CD–CG Cascade\n\nThis circuit can be intuitively understood as a two-stage cascade:\n\n1. **Common-Drain (Source Follower) Stage ($M_1$):**\n   * Drives the low input impedance at the source of $M_2$ ($R_{\\text{in2}} \\approx 1/g_{m2}$).\n   * Gain from input to source:\n     $$A_{v1} = \\frac{v_s}{v_{\\text{in}}} = \\frac{\\frac{1}{g_{m2}}}{\\frac{1}{g_{m1}} + \\frac{1}{g_{m2}}} = \\frac{g_{m1}}{g_{m1} + g_{m2}} = \\frac{1}{2}$$\n\n2. **Common-Gate Stage ($M_2$):**\n   * Takes the signal at its source and amplifies it to the drain.\n   * Gain from source to drain:\n     $$A_{v2} = \\frac{v_{\\text{out}}}{v_s} = +g_{m2} R_D = g_m R_D$$\n\n3. **Total Gain:**\n   $$A_v = A_{v1} \\times A_{v2} = \\left(\\frac{1}{2}\\right)(g_m R_D) = \\frac{1}{2} g_m R_D$$\n\n---\n\n### 5. Input and Output Impedance\n\n* **Input Impedance ($R_{\\text{in}}$):** \n  Looking into the gate of $M_1$:\n  $$R_{\\text{in}} \\approx \\infty \\quad \\text{(at low frequencies)}$$\n\n* **Output Impedance ($R_{\\text{out}}$):** \n  Looking into the drain of $M_2$:\n  $$R_{\\text{out}} \\approx R_D$$\n  *(If including transistor output resistance $r_o$: $R_{\\text{out}} = R_D \\parallel [r_{o2} + (1 + g_{m2} r_{o2}) R_S]$, where $R_S \\approx 1/g_{m1}$)*.\n\n---\n\n### 6. Key Advantages & Applications\n\n1. **High-Frequency Operation (No Miller Effect):**\n   * The drain of $M_1$ is at AC ground, so its gate-drain capacitance $C_{gd1}$ experiences **no Miller multiplication**.\n   * $M_2$ is a Common-Gate amplifier, which naturally has low input capacitance and wide bandwidth.\n2. **High Input Impedance with Non-Inverting Gain:**\n   * It provides non-inverting voltage gain with purely capacitive MOS gate input impedance.\n3. **Application:** Widely used as a **wideband non-inverting amplifier** and in **RF / high-speed analog front-ends**.",
        "format": "markdown",
        "sha256": "c156bc27b913839f253a60b9fc1bce41cab2d657fddaa1c73f6b267dbab7bd8e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair as a source follower driving a common-gate stage, with M2 biased at Vb and output taken at its drain. The small-signal analysis gives the correct non-inverting gain; secondary details do not undermine the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3731,
        "total_tokens": 4841,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3731,
        "total_tokens": 4841,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Identification and Architecture\nThe circuit is a **single-ended differential amplifier** (or a **source-coupled pair**) composed of:\n* **Transistors $M_1$ and $M_2$:** NMOS differential pair sharing a common-source node.\n* **Tail Current Source $I_1$:** Provides a constant total bias current $I_1$ for the pair.\n* **$M_1$ (Input Stage):** Configured as a **source follower (common-drain)** stage driven by the input signal $V_{\\text{in}}$, with its drain connected directly to the supply rail $V_{DD}$ (AC ground).\n* **$M_2$ (Amplifying Stage):** Configured as a **common-gate** stage with its gate biased at a constant DC potential $V_b$ (AC ground).\n* **Load Resistor $R_D$:** Connected between $V_{DD}$ and the drain of $M_2$.\n* **Output $V_{\\text{out}}$:** Taken single-endedly at the drain of $M_2$.\n\n---\n\n### 2. Qualitative (Large-Signal) Operation\n1. When $V_{\\text{in}}$ increases, the source node voltage $V_S$ follows $V_{\\text{in}}$ and rises (due to the source-follower action of $M_1$).\n2. Since the gate of $M_2$ is fixed at $V_b$, an increase in $V_S$ reduces the gate-to-source voltage of $M_2$ ($V_{GS2} = V_b - V_S$).\n3. The decrease in $V_{GS2}$ reduces the drain current $I_{D2}$ flowing through $M_2$.\n4. The reduced current $I_{D2}$ lowers the voltage drop across $R_D$, causing the output voltage to rise:\n   $$V_{\\text{out}} = V_{DD} - I_{D2} R_D \\uparrow$$\n5. Therefore, $V_{\\text{out}}$ increases as $V_{\\text{in}}$ increases, making this a **non-inverting amplifier**.\n\n---\n\n### 3. DC Operating Point (Biasing)\nAssuming $M_1$ and $M_2$ are matched transistors and $V_{\\text{in, DC}} = V_b$:\n* **Currents:** \n  $$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n* **Common Source Voltage:** \n  $$V_S = V_b - V_{GS2} = V_{\\text{in, DC}} - \\sqrt{\\frac{I_1}{\\mu_n C_{ox} (W/L)}} - V_{TH}$$\n* **DC Output Voltage:** \n  $$V_{\\text{out, DC}} = V_{DD} - \\frac{I_1}{2} R_D$$\n\n**Conditions for Saturation:**\n* For $M_1$: $V_{DD} - V_S \\ge V_{\\text{in}} - V_S - V_{TH} \\implies V_{\\text{in}} \\le V_{DD} + V_{TH}$ (easily satisfied).\n* For $M_2$: $V_{\\text{out}} \\ge V_b - V_{TH} \\implies V_{DD} - \\frac{I_1}{2} R_D \\ge V_b - V_{TH}$.\n* For Current Source $I_1$: $V_S \\ge V_{\\text{margin}}$ (minimum voltage to keep the current source in saturation).\n\n---\n\n### 4. Small-Signal Analysis & Voltage Gain\n\nAssuming ideal transistors (ignoring channel-length modulation $\\lambda = 0$ and body effect $\\gamma = 0$):\n\n#### Step 1: Source Node Voltage ($v_s$)\n* Transistor $M_1$ sees an impedance looking into the source of $M_2$ equal to $1/g_{m2}$.\n* Assuming an ideal current source ($r_{\\text{tail}} \\to \\infty$):\n  $$v_s = v_{\\text{in}} \\left( \\frac{\\frac{1}{g_{m2}}}{\\frac{1}{g_{m1}} + \\frac{1}{g_{m2}}} \\right) = v_{\\text{in}} \\left( \\frac{g_{m1}}{g_{m1} + g_{m2}} \\right)$$\n\n#### Step 2: Output Voltage ($v_{\\text{out}}$)\n* For the common-gate stage $M_2$, the gate is at AC ground ($v_g = 0$):\n  $$i_{d2} = -g_{m2} v_{gs2} = -g_{m2}(0 - v_s) = g_{m2} v_s$$\n* The small-signal output voltage is:\n  $$v_{\\text{out}} = -i_{d2} R_D = g_{m2} v_s R_D$$\n\n#### Step 3: Total Voltage Gain ($A_v$)\nSubstituting $v_s$ into $v_{\\text{out}}$:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} R_D$$\n\nIf the transistors are identical and biased with equal currents ($g_{m1} = g_{m2} = g_m$):\n$$\\mathbf{A_v = +\\frac{1}{2} g_m R_D}$$\n\n*(Note: The factor of $1/2$ arises because the single-ended input is split across the source-to-gate voltages of both $M_1$ and $M_2$.)*\n\n---\n\n### 5. Input and Output Impedance\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  $$R_{\\text{in}} = \\infty \\quad \\text{(at low frequencies, looking into the gate of } M_1\\text{)}$$\n* **Output Impedance ($R_{\\text{out}}$):**\n  $$R_{\\text{out}} \\approx R_D$$\n  *(If channel-length modulation $r_{o2}$ is included, $R_{\\text{out}} = R_D \\parallel [r_{o2} + (1 + g_{m2} r_{o2}) R_S] \\approx R_D$.)*\n\n---\n\n### 6. Key Advantages & High-Frequency Characteristics\n1. **Absence of Miller Effect:**\n   * $M_1$'s drain is tied to $V_{DD}$ (AC ground), so there is **no Miller multiplication** of the gate-drain capacitance $C_{gd1}$.\n   * $M_2$ is a common-gate stage, which inherently does not suffer from Miller effect on $C_{gd2}$.\n2. **Wide Bandwidth:** Because Miller multiplication is eliminated at the input, this topology exhibits **excellent high-frequency performance** and is widely used in RF/wideband amplifiers, buffers, and active baluns.",
        "format": "markdown",
        "sha256": "0313931c9c5df3d9ede242446c86b8577082d72f207a6c8afd342f4a38f4c67f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair as a source follower driving a common-gate stage, with M2 biased at Vb and the output at its drain. It gives the correct non-inverting gain; secondary details do not undermine the essential analysis.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3817,
        "total_tokens": 4927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3817,
        "total_tokens": 4927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is an NMOS **source follower** (common-drain amplifier) where transistor $M_1$ acts as the driver, $M_2$ acts as a current-source load, and $R_S$ represents the source resistance at the input. \n\nThe output impedance can exhibit **inductive behavior** at high frequencies due to the interaction between the source resistance $R_S$, the gate-to-source capacitance $C_{gs1}$, and the transconductance $g_{m1}$.\n\n---\n\n### 1. Small-Signal Derivation of Output Impedance\n\nTo determine the output impedance $Z_{\\text{out}}$, we set the input signal $V_{\\text{in}} = 0$ (AC ground) and apply a test voltage $V_x$ at the output node ($V_{\\text{out}}$).\n\n```\n          0 (AC Ground)\n             |\n            [RS]\n             |\n             +-------- Gate (Vg)\n             |\n           ===== Cgs1\n             |\nVx ---------+-------- Source (Vout)\n             |\n            (↓) gm1*Vgs\n             |\n            GND\n```\n\n1. **Gate Voltage ($V_g$):**\n   The capacitance $C_{gs1}$ and the source resistor $R_S$ form a voltage divider between the output node and AC ground:\n   $$V_g = V_x \\cdot \\frac{R_S}{R_S + \\frac{1}{sC_{gs1}}} = V_x \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}}$$\n\n2. **Gate-to-Source Voltage ($V_{gs1}$):**\n   $$V_{gs1} = V_g - V_x = V_x \\left( \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}} - 1 \\right) = -\\frac{V_x}{1 + s R_S C_{gs1}}$$\n\n3. **Output Current ($I_x$):**\n   Neglecting channel-length modulation ($r_o$) for simplicity, the test current entering the source of $M_1$ is:\n   $$I_x = -g_{m1}V_{gs1} - sC_{gs1}V_{gs1} = -(g_{m1} + sC_{gs1})V_{gs1}$$\n\n   Substituting $V_{gs1}$:\n   $$I_x = V_x \\cdot \\frac{g_{m1} + sC_{gs1}}{1 + s R_S C_{gs1}}$$\n\n4. **Output Impedance ($Z_{\\text{out}}$):**\n   $$Z_{\\text{out}}(s) = \\frac{V_x}{I_x} = \\frac{1 + s R_S C_{gs1}}{g_{m1} + s C_{gs1}}$$\n\n---\n\n### 2. Condition for Inductive Behavior\n\nFor frequencies well below the transit frequency ($\\omega \\ll \\omega_T \\approx g_{m1}/C_{gs1}$), we can approximate $g_{m1} + sC_{gs1} \\approx g_{m1}$:\n\n$$Z_{\\text{out}}(s) \\approx \\frac{1 + s R_S C_{gs1}}{g_{m1}} = \\frac{1}{g_{m1}} + s \\left(\\frac{R_S C_{gs1}}{g_{m1}}\\right)$$\n\nThis expression represents an **equivalent series $R\\text{-}L$ circuit**:\n* **Equivalent Resistance:** $R_{\\text{eq}} \\approx \\frac{1}{g_{m1}}$\n* **Equivalent Inductance:** $L_{\\text{eq}} \\approx \\frac{R_S C_{gs1}}{g_{m1}}$\n\nEvaluating the exact imaginary part of $Z_{\\text{out}}(j\\omega)$:\n$$\\text{Im}\\{Z_{\\text{out}}(j\\omega)\\} = \\frac{\\omega C_{gs1}(g_{m1} R_S - 1)}{g_{m1}^2 + \\omega^2 C_{gs1}^2}$$\n\nThus, the output impedance is **strictly inductive** ($\\text{Im}\\{Z_{\\text{out}}\\} > 0$) when:\n$$R_S > \\frac{1}{g_{m1}}$$\n\n---\n\n### 3. Intuitive Explanation\n\n* **At Low Frequencies ($\\omega \\to 0$):** \n  $C_{gs1}$ acts as an open circuit, keeping the gate tied to AC ground ($V_g = 0$). Any increase in $V_{\\text{out}}$ creates a full opposing change in $V_{gs1} = -V_{\\text{out}}$, causing $M_1$ to draw strong restoring current ($g_{m1}V_{\\text{out}}$). Hence, the output impedance is low: $Z_{\\text{out}} \\approx 1/g_{m1}$.\n\n* **At High Frequencies:** \n  The impedance of $C_{gs1}$ decreases, coupling $V_{\\text{out}}$ into the gate node. As $V_{\\text{out}}$ rises, $V_g$ rises with it, which reduces the effective magnitude of $|V_{gs1}| = |V_g - V_{\\text{out}}|$. \n\n* **Result:** \n  Because $|V_{gs1}|$ drops, $M_1$ conducts *less* corrective current for a given output voltage perturbation. Consequently, **the output impedance increases with frequency**, which is the fundamental characteristic of an inductor.\n\n---\n\n### Practical Consequence\nIf this source follower drives a capacitive load $C_L$, the combination of the equivalent output inductance $L_{\\text{eq}}$ and $C_L$ forms a resonant $R\\text{-}L\\text{-}C$ tank, which can lead to **frequency peaking, ringing in the transient response, or even instability/oscillations**.",
        "format": "markdown",
        "sha256": "68fe77600b00b804a4daa6cbba53ffb3fb0e687e2de828956aacae661a22dcd6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower, derives the correct output-impedance expression and inductive condition, and explains how Cgs couples the gate to the source so the impedance rises with frequency. The approximate equivalent-inductance value is slightly imprecise, but the central mechanism and conclusion are correct.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3563,
        "total_tokens": 4645,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2243,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3563,
        "total_tokens": 4645,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2243,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the circuit (a **source follower** or common-drain stage) can exhibit **inductive behavior** due to the interaction between the gate-source capacitance ($C_{gs1}$) of transistor $M_1$ and the source resistance $R_S$.\n\n---\n\n### 1. Intuitive Explanation\n\n1. **At Low Frequencies (DC):**\n   * The gate is held at AC ground ($V_{\\text{in}} = 0$), so $V_g = 0$.\n   * When the output voltage $V_{\\text{out}}$ increases by $\\Delta V$, the gate-source voltage drops by the full amount: $\\Delta V_{gs} = -\\Delta V$.\n   * This produces a strong restorative drain current change $\\Delta I_D = g_{m1} \\Delta V$, resulting in a low output impedance:\n     $$Z_{\\text{out}} \\approx \\frac{1}{g_{m1}}$$\n\n2. **At High Frequencies:**\n   * The gate-source capacitance $C_{gs1}$ couples variations from the source back to the gate across the resistance $R_S$.\n   * As the frequency increases, the impedance of $C_{gs1}$ decreases, causing the gate voltage $V_g$ to increasingly **track** the output/source voltage $V_{\\text{out}}$.\n   * Because $V_g$ follows $V_{\\text{out}}$, the magnitude of $|V_{gs}| = |V_g - V_{\\text{out}}|$ decreases.\n   * With a smaller $|V_{gs}|$, transistor $M_1$ provides less corrective current for a given change in $V_{\\text{out}}$.\n   * Consequently, **the output impedance increases with frequency**, which is the defining characteristic of an **inductor** ($Z_L = j\\omega L$).\n\n---\n\n### 2. Mathematical Derivation\n\nTo find the small-signal output impedance $Z_{\\text{out}}(s)$:\n\n1. Deactivate the input ($V_{\\text{in}} = 0$).\n2. Apply a test voltage $V_X$ at the output node ($V_{\\text{out}}$).\n3. The voltage at the gate $V_g$ is determined by the voltage divider between $C_{gs1}$ and $R_S$:\n   $$V_g = V_X \\frac{R_S}{R_S + \\frac{1}{sC_{gs1}}} = V_X \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}}$$\n\n4. The gate-to-source voltage $V_{gs}$ is:\n   $$V_{gs} = V_g - V_X = V_X \\left( \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}} - 1 \\right) = -V_X \\frac{1}{1 + s R_S C_{gs1}}$$\n\n5. The total test current $I_X$ entering the source node (neglecting channel-length modulation $r_o$ and body effect for simplicity) is:\n   $$I_X = -g_{m1}V_{gs} + (V_X - V_g)sC_{gs1} = \\frac{g_{m1} + sC_{gs1}}{1 + s R_S C_{gs1}} V_X$$\n\n6. The output impedance looking into the source is therefore:\n   $$Z_{\\text{out}}(s) = \\frac{V_X}{I_X} = \\frac{1 + s R_S C_{gs1}}{g_{m1} + s C_{gs1}}$$\n\nFor frequencies well below the transistor's transit frequency ($\\omega \\ll \\omega_T \\approx g_{m1}/C_{gs1}$), we have $s C_{gs1} \\ll g_{m1}$, simplifying the impedance to:\n$$Z_{\\text{out}}(s) \\approx \\frac{1}{g_{m1}} + s \\left( \\frac{R_S C_{gs1}}{g_{m1}} \\right)$$\n\n---\n\n### 3. Equivalent Circuit Interpretation\n\nThe expression above directly represents a **series $R$–$L$ network**:\n* **Equivalent Resistance:** \n  $$R_{\\text{eq}} \\approx \\frac{1}{g_{m1}}$$\n* **Equivalent Inductance:** \n  $$L_{\\text{eq}} \\approx \\frac{R_S C_{gs1}}{g_{m1}}$$\n\n### Practical Consequence\nBecause $Z_{\\text{out}}$ has an inductive component, if the circuit drives a **capacitive load** ($C_L$), the equivalent inductance $L_{\\text{eq}}$ and $C_L$ form an **$RLC$ resonant circuit**. This often leads to:\n* **Gain peaking** in the frequency response.\n* **Ringing / overshoot** in the step response.\n* Potential **instability** or oscillation if $R_S$ or $C_L$ is large.",
        "format": "markdown",
        "sha256": "6d63556f92e9101f7160f3253f1d502a6946cbd1c9c08f25ac2efff9968aaf22"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the source follower, gives the correct exact output-impedance expression, and explains how Cgs makes the gate track the source so the impedance rises from about 1/gm toward RS. The stated equivalent-inductance approximation omits a pole correction, but the core mechanism and conclusion are correct.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3383,
        "total_tokens": 4465,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2270,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3383,
        "total_tokens": 4465,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2270,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the source-follower (common-drain) stage shown in the figure can become **inductive** due to the interaction between the **source resistance $R_S$** at the gate and the **gate-to-source capacitance $C_{gs1}$** of transistor $M_1$.\n\n---\n\n### 1. Intuitive Explanation\n\n* **At Low Frequencies (DC):**  \n  The gate of $M_1$ is held at AC ground because $C_{gs1}$ acts as an open circuit. If the output voltage $V_{\\text{out}}$ rises by $\\Delta V$, the gate-source voltage drops by the full amount ($\\Delta V_{gs} = -\\Delta V$). Transistor $M_1$ responds with an immediate change in channel current $\\Delta I_D = g_{m1}\\Delta V$, resulting in the standard low-frequency output resistance:\n  $$R_{\\text{out}} \\approx \\frac{1}{g_{m1}}$$\n\n* **At Higher Frequencies:**  \n  The gate-source capacitance $C_{gs1}$ forms a high-pass voltage divider with $R_S$. As frequency increases, $C_{gs1}$ couples variations in $V_{\\text{out}}$ back to the gate:\n  $$V_g \\approx V_{\\text{out}} \\cdot \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}}$$\n  Because the gate voltage now partially **tracks** the output voltage, the change across the gate-source junction is reduced ($\\Delta V_{gs} = V_g - V_{\\text{out}} < \\Delta V$).\n\n* **Inductive Effect:**  \n  Since $|\\Delta V_{gs}|$ decreases with frequency, $M_1$ provides **less** opposing current for a given output voltage change. Consequently, the output impedance **increases as frequency increases** (exhibiting a positive phase shift where voltage leads current), which is the fundamental characteristic of an **inductor**.\n\n---\n\n### 2. Small-Signal Derivation\n\nTo calculate the output impedance $Z_{\\text{out}}(s)$:\n1. Set the AC input to zero ($V_{\\text{in}} = 0$).\n2. Apply a test voltage $V_X$ at the output node and measure the test current $I_X$ entering the node.\n\n#### Step 1: Gate Voltage\nApplying voltage division at the gate node:\n$$V_g = V_X \\frac{R_S}{R_S + \\frac{1}{sC_{gs1}}} = V_X \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}}$$\n\n#### Step 2: Gate-to-Source Voltage\n$$V_{gs} = V_g - V_X = V_X \\left( \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}} - 1 \\right) = -\\frac{V_X}{1 + s R_S C_{gs1}}$$\n\n#### Step 3: Output Current\nNeglecting channel-length modulation ($r_o \\to \\infty$) for simplicity, the total test current is the sum of the dependent current source and the current through $C_{gs1}$:\n$$I_X = -g_{m1} V_{gs} + (V_X - V_g) s C_{gs1}$$\n\nSubstituting $V_{gs}$ and $(V_X - V_g)$:\n$$I_X = \\frac{g_{m1} V_X}{1 + s R_S C_{gs1}} + \\frac{s C_{gs1} V_X}{1 + s R_S C_{gs1}} = V_X \\left( \\frac{g_{m1} + s C_{gs1}}{1 + s R_S C_{gs1}} \\right)$$\n\n#### Step 4: Output Impedance\n$$Z_{\\text{out}}(s) = \\frac{V_X}{I_X} = \\frac{1 + s R_S C_{gs1}}{g_{m1} + s C_{gs1}}$$\n\nFor operating frequencies well below the transistor's transit frequency ($\\omega \\ll \\omega_T \\approx \\frac{g_{m1}}{C_{gs1}}$), $g_{m1} + s C_{gs1} \\approx g_{m1}$:\n\n$$Z_{\\text{out}}(s) \\approx \\frac{1}{g_{m1}} + s \\left( \\frac{R_S C_{gs1}}{g_{m1}} \\right)$$\n\n---\n\n### 3. Conclusion\n\nThe output impedance can be modeled as a series combination of:\n* A **resistor**: $R_{\\text{eq}} = \\dfrac{1}{g_{m1}}$\n* An **equivalent inductor**: $L_{\\text{eq}} = \\dfrac{R_S C_{gs1}}{g_{m1}}$\n\n> **Practical Note:** This inductive behavior is significant in circuit design because driving a capacitive load $C_L$ with a source follower can create an underdamped $RLC$ network, leading to **gain peaking, ringing in the transient response, or even instability/oscillations**.",
        "format": "markdown",
        "sha256": "4295bb0980d6286308107ce80c8400ebf98e12fe1963b965c0c05ae7822769c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the source follower, explains how Cgs makes the gate track the output, and derives the correct Zout expression, which gives the 1/gm-to-RS transition. Its simplified inductance omits the pole contribution and leaves the RS condition implicit, but the core explanation meets the golden full-credit rule.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3466,
        "total_tokens": 4548,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2317,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3466,
        "total_tokens": 4548,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2317,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive DC and small-signal analysis of the given circuit.\n\n---\n\n### **1. Circuit Overview & Operating Principle**\n\nThe circuit consists of two NMOS transistors, $M_1$ and $M_2$, connected in a **positive-feedback loop**:\n* **$M_1$** acts as a common-source amplifier with a resistive load $R_{D1}$. Its gate is connected to node $X$, and its drain provides the output voltage $V_{\\text{out}}$.\n* **$M_2$** has its gate driven by $V_{\\text{out}}$ and its drain connected back to node $X$.\n* **$I_{\\text{in}}$** is an input current source injected into node $X$.\n\n---\n\n### **2. Large-Signal (DC) Analysis**\n\nAssuming both transistors operate in the **saturation region** and neglecting channel-length modulation ($\\lambda = 0$):\n\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_{GS} - V_{TH})^2$$\n\n#### **A. Node $X$ and Transistor $M_2$**\nSince the gate of $M_1$ draws no DC current, all input current $I_{\\text{in}}$ must flow through the drain of $M_2$:\n$$I_{D2} = I_{\\text{in}}$$\n\nBecause the source of $M_2$ is grounded, $V_{GS2} = V_{\\text{out}}$. Thus:\n$$I_{\\text{in}} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{\\text{out}} - V_{TH2})^2$$\n\nSolving for $V_{\\text{out}}$:\n$$\\mathbf{V_{\\text{out}} = V_{TH2} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{ox} (W/L)_2}}}$$\n\n#### **B. Output Node and Transistor $M_1$**\nBy applying KCL at the output node $V_{\\text{out}}$:\n$$I_{D1} = \\frac{V_{DD} - V_{\\text{out}}}{R_{D1}}$$\n\nSince $V_{GS1} = V_X$, the saturation current of $M_1$ is:\n$$\\frac{V_{DD} - V_{\\text{out}}}{R_{D1}} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_X - V_{TH1})^2$$\n\nSolving for the node voltage $V_X$:\n$$\\mathbf{V_X = V_{TH1} + \\sqrt{\\frac{2(V_{DD} - V_{\\text{out}})}{\\mu_n C_{ox} (W/L)_1 R_{D1}}}}$$\n\n#### **C. Saturation Conditions**\nFor both devices to remain in saturation:\n1. **$M_1$:** $V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_{\\text{out}} \\ge V_X - V_{TH1}$\n2. **$M_2$:** $V_{DS2} \\ge V_{GS2} - V_{TH2} \\implies V_X \\ge V_{\\text{out}} - V_{TH2}$\n\n---\n\n### **3. Small-Signal Analysis**\n\nLet:\n* $g_{m1}, g_{m2}$ be the transconductances of $M_1$ and $M_2$.\n* $r_{o1}, r_{o2}$ be the output resistances of $M_1$ and $M_2$.\n\n#### **A. Transimpedance Gain ($Z_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)**\n\nWriting KCL at node $X$:\n$$i_{\\text{in}} = g_{m2} v_{\\text{out}} + \\frac{v_X}{r_{o2}} \\quad \\text{--- (1)}$$\n\nWriting KCL at node $V_{\\text{out}}$:\n$$g_{m1} v_X + \\frac{v_{\\text{out}}}{R_{D1} \\parallel r_{o1}} = 0 \\implies v_X = -g_{m1}(R_{D1} \\parallel r_{o1}) v_{\\text{out}} \\quad \\text{--- (2)}$$\n\nSubstitute equation (2) into equation (1):\n$$i_{\\text{in}} = g_{m2} v_{\\text{out}} - \\frac{g_{m1}(R_{D1} \\parallel r_{o1})}{r_{o2}} v_{\\text{out}} = v_{\\text{out}} \\left[ g_{m2} - \\frac{g_{m1}(R_{D1} \\parallel r_{o1})}{r_{o2}} \\right]$$\n\nThus, the exact transimpedance gain is:\n$$\\mathbf{Z_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2} - \\dfrac{g_{m1}(R_{D1} \\parallel r_{o1})}{r_{o2}}}}$$\n\n* **Ideal Case ($\\lambda \\approx 0 \\implies r_{o1}, r_{o2} \\to \\infty$):**\n  $$\\mathbf{Z_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2}}}$$\n\n---\n\n#### **B. Input Resistance ($R_{\\text{in}}$ at Node $X$)**\n\nUsing $v_X = -g_{m1} R_{D1} v_{\\text{out}}$ and $v_{\\text{out}} = \\frac{i_{\\text{in}}}{g_{m2}}$:\n\n$$v_X = -g_{m1} R_{D1} \\left(\\frac{i_{\\text{in}}}{g_{m2}}\\right)$$\n\n$$\\mathbf{R_{\\text{in}} = \\frac{v_X}{i_{\\text{in}}} = -\\frac{1}{g_{m1} g_{m2} R_{D1}}}$$\n\n> **Key Insight:** The circuit presents a **negative input resistance** at node $X$ due to the positive feedback loop created by the two cross-coupled stages.\n\n---\n\n#### **C. Output Resistance ($R_{\\text{out}}$ at Node $V_{\\text{out}}$)**\n\nIf the current source $I_{\\text{in}}$ has a finite source resistance $R_S$:\n1. Apply a test voltage $v_t$ at $V_{\\text{out}}$ with $i_{\\text{in}} = 0$.\n2. KCL at node $X$:\n   $$\\frac{v_X}{R_S} + g_{m2} v_t = 0 \\implies v_X = -g_{m2} R_S v_t$$\n3. KCL at $V_{\\text{out}}$:\n   $$i_t = \\frac{v_t}{R_{D1}} + g_{m1} v_X = v_t \\left( \\frac{1}{R_{D1}} - g_{m1} g_{m2} R_S \\right)$$\n\n$$\\mathbf{R_{\\text{out}} = \\frac{v_t}{i_t} = \\frac{R_{D1}}{1 - g_{m1} g_{m2} R_{D1} R_S}}$$\n\n---\n\n### **4. Feedback and Stability Analysis**\n\n* **Loop Gain ($T$):**\n  $$T = A_{v1} \\cdot A_{v2} = (-g_{m1} R_{D1}) \\cdot (-g_{m2} R_S) = \\mathbf{g_{m1} g_{m2} R_{D1} R_S}$$\n* **Stability Condition:**\n  Since the feedback is regenerative (positive):\n  * If $T < 1 \\implies g_{m1} g_{m2} R_{D1} R_S < 1$, the circuit operates as a stable transimpedance amplifier.\n  * If $T > 1$, the system is unstable and acts as a **latch / bistable circuit**.\n\n---\n\n### **Summary of Key Parameters (Ideal Case, $\\lambda = 0$)**\n\n| Parameter | Expression |\n| :--- | :--- |\n| **Output Voltage ($V_{\\text{out}}$)** | $V_{TH2} + \\sqrt{\\dfrac{2 I_{\\text{in}}}{\\mu_n C_{ox} (W/L)_2}}$ |\n| **Transimpedance Gain ($Z_m$)** | $\\dfrac{1}{g_{m2}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $-\\dfrac{1}{g_{m1} g_{m2} R_{D1}}$ |\n| **Loop Gain ($T$)** | $g_{m1} g_{m2} R_{D1} R_S$ |",
        "format": "markdown",
        "sha256": "dd1c56e847be4a2cf72b899d9bc9d12796935f7329f808c40caff84ede96a65e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as tied to Vout, the positive-feedback loop, and the negative-input-resistance/instability consequence. Some detailed small-signal algebra and the stated loop-gain expression are flawed, but the essential result required for full credit is captured.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 7732,
        "total_tokens": 8850,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5686,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 7732,
        "total_tokens": 8850,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5686,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### **1. Circuit Overview and Topology**\n\n* **Transistor $M_1$**: Functions as a common-source (CS) amplifier loaded by resistor $R_{D1}$. Its gate is connected to node $X$ and its drain forms the output node $V_{\\text{out}}$.\n* **Transistor $M_2$**: Has its gate connected to $V_{\\text{out}}$ and its drain connected back to node $X$.\n* **Input**: An input current $I_{\\text{in}}$ injected into node $X$.\n* **Feedback Mechanism**: \n  * A change at node $X$ is amplified and inverted by $M_1$ at $V_{\\text{out}}$ ($\\text{gain} < 0$).\n  * The voltage change at $V_{\\text{out}}$ is sensed by the gate of $M_2$, producing an inverting current-to-voltage response at node $X$ ($\\text{gain} < 0$).\n  * Two common-source (inverting) stages in a loop yield an overall **positive feedback** loop.\n\n---\n\n### **2. DC (Large-Signal) Analysis**\n\nAssuming both transistors $M_1$ and $M_2$ operate in the **saturation region** and neglecting channel-length modulation ($\\lambda = 0$):\n\n1. **Current through $M_2$**:\n   Since the gate of $M_1$ draws no DC current, all of $I_{\\text{in}}$ must flow through the drain of $M_2$:\n   $$I_{D2} = I_{\\text{in}} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{\\text{out}} - V_{TH2})^2$$\n\n   Solving for the output DC voltage $V_{\\text{out}}$:\n   $$V_{\\text{out}} = V_{TH2} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2}}$$\n   *(The output voltage is established solely by the $V_{GS}$ required for $M_2$ to conduct $I_{\\text{in}}$.)*\n\n2. **Current through $M_1$**:\n   The current flowing through $R_{D1}$ equals the drain current of $M_1$ (since the gate of $M_2$ draws zero DC current):\n   $$I_{D1} = \\frac{V_{DD} - V_{\\text{out}}}{R_{D1}}$$\n\n3. **Voltage at Node $X$ ($V_X = V_{GS1}$)**:\n   $$V_X = V_{TH1} + \\sqrt{\\frac{2 I_{D1}}{\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1}} = V_{TH1} + \\sqrt{\\frac{2 (V_{DD} - V_{\\text{out}})}{\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 R_{D1}}}$$\n\n4. **Conditions for Saturation**:\n   * For $M_1$: $V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_{\\text{out}} \\ge V_X - V_{TH1}$\n   * For $M_2$: $V_{DS2} \\ge V_{GS2} - V_{TH2} \\implies V_X \\ge V_{\\text{out}} - V_{TH2}$\n\n---\n\n### **3. Small-Signal Analysis**\n\nLet:\n* $g_{m1}, r_{o1}$ be the transconductance and output resistance of $M_1$.\n* $g_{m2}, r_{o2}$ be the transconductance and output resistance of $M_2$.\n* $R_L = R_{D1} \\parallel r_{o1}$.\n\n#### **A. Transimpedance Gain ($Z_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)**\n\nWriting KCL at node $X$ and node $V_{\\text{out}}$:\n\n1. **At Node $X$**:\n   $$i_{\\text{in}} = g_{m2} v_{\\text{out}} + \\frac{v_x}{r_{o2}}$$\n\n2. **At Node $V_{\\text{out}}$**:\n   $$\\frac{v_{\\text{out}}}{R_L} + g_{m1} v_x = 0 \\implies v_x = -\\frac{v_{\\text{out}}}{g_{m1} R_L}$$\n\nSubstitute $v_x$ into the node $X$ equation:\n$$i_{\\text{in}} = g_{m2} v_{\\text{out}} - \\frac{v_{\\text{out}}}{g_{m1} r_{o2} R_L} = v_{\\text{out}} \\left( g_{m2} - \\frac{1}{g_{m1} r_{o2} (R_{D1} \\parallel r_{o1})} \\right)$$\n\nTherefore, the **Transimpedance Gain** is:\n$$Z_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2} - \\dfrac{1}{g_{m1} r_{o2} (R_{D1} \\parallel r_{o1})}}$$\n\nIf channel-length modulation is neglected ($r_{o1}, r_{o2} \\to \\infty$):\n$$\\mathbf{Z_m \\approx \\frac{1}{g_{m2}}}$$\n\n---\n\n#### **B. Input Resistance ($R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}}$)**\n\nUsing the relationship $v_x = -\\dfrac{v_{\\text{out}}}{g_{m1} R_L}$:\n$$R_{\\text{in}} = -\\frac{Z_m}{g_{m1} R_L} = -\\frac{1}{g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) - \\dfrac{1}{r_{o2}}}$$\n\nIf $r_{o1}, r_{o2} \\to \\infty$:\n$$\\mathbf{R_{\\text{in}} \\approx -\\frac{1}{g_{m1} g_{m2} R_{D1}}}$$\n\n> **Key Observation**: The circuit exhibits a **negative input resistance** at node $X$. When $i_{\\text{in}}$ increases, $v_{\\text{out}}$ rises, which decreases the gate-source overdrive of $M_1$, causing $v_x$ to decrease.\n\n---\n\n#### **C. Output Resistance ($R_{\\text{out}}$)**\n\nTo find $R_{\\text{out}}$, set $i_{\\text{in}} = 0$ and apply a test voltage $v_t$ at $V_{\\text{out}}$:\n\n1. At node $X$ with $i_{\\text{in}} = 0$:\n   $$0 = g_{m2} v_t + \\frac{v_x}{r_{o2}} \\implies v_x = -g_{m2} r_{o2} v_t$$\n\n2. Total test current drawn:\n   $$i_t = \\frac{v_t}{R_L} + g_{m1} v_x = v_t \\left( \\frac{1}{R_L} - g_{m1} g_{m2} r_{o2} \\right)$$\n\n$$\\mathbf{R_{\\text{out}} = \\frac{v_t}{i_t} = \\frac{1}{\\dfrac{1}{R_{D1} \\parallel r_{o1}} - g_{m1} g_{m2} r_{o2}}}$$\n\n---\n\n### **4. Loop Gain & Stability**\n\n* Breaking the loop at node $X$:\n  * The gain from node $X$ to $V_{\\text{out}}$ is $A_1 = -g_{m1} (R_{D1} \\parallel r_{o1})$.\n  * The gain from $V_{\\text{out}}$ back to node $X$ is $A_2 = -g_{m2} r_{o2}$.\n* **Open-Loop Gain ($T$)**:\n  $$T = A_1 \\times A_2 = + g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2} > 0$$\n\nSince $T > 0$, the circuit operates with **positive feedback**. \n\n---\n\n### **5. Summary of Circuit Characteristics**\n\n| Parameter | Exact Value | Ideal Approximation ($r_o \\to \\infty$) |\n| :--- | :--- | :--- |\n| **Transimpedance Gain ($Z_m$)** | $\\dfrac{1}{g_{m2} - \\frac{1}{g_{m1} r_{o2} (R_{D1} \\parallel r_{o1})}}$ | $\\mathbf{+\\dfrac{1}{g_{m2}}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $-\\dfrac{1}{g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) - \\frac{1}{r_{o2}}}$ | $\\mathbf{-\\dfrac{1}{g_{m1} g_{m2} R_{D1}}}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\dfrac{1}{\\frac{1}{R_{D1} \\parallel r_{o1}} - g_{m1} g_{m2} r_{o2}}$ | $\\mathbf{-\\dfrac{1}{g_{m1} g_{m2} r_{o2}}}$ |\n\n### **Applications:**\n1. **Active Transimpedance Amplifier**: Used for current-to-voltage conversion where gain is accurately set by $1/g_{m2}$.\n2. **Negative Resistance Generator**: Used in oscillator design (e.g., cross-coupled LC oscillators) and Q-enhancement circuits to cancel resistive losses.",
        "format": "markdown",
        "sha256": "fd2ee82dd86254d9edbfb0592cdd54d9c368e869c12df86a9e858ce316e0ab4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies M2’s gate as tied to Vout, recognizes the positive-feedback loop through M1 and M2, and gives the loop-gain-modified negative input resistance, satisfying the golden full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 6956,
        "total_tokens": 8074,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4684,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 6956,
        "total_tokens": 8074,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4684,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### **1. Circuit Description and Identification**\n\n* **Transistors:** Two N-channel MOSFETs ($M_1$ and $M_2$), both operating with their sources grounded.\n* **Stage 1 ($M_1$):** A Common-Source (CS) amplifier stage with resistive load $R_{D1}$. Its gate is driven by node $X$, and its drain provides the output $V_{\\text{out}}$.\n* **Stage 2 ($M_2$):** A feedback transistor whose gate is connected to $V_{\\text{out}}$ and drain is connected to node $X$.\n* **Input:** Current source $I_{\\text{in}}$ connected to node $X$.\n* **Output:** Voltage $V_{\\text{out}}$ taken at the drain of $M_1$.\n\n---\n\n### **2. Feedback Loop & Polarity Analysis**\n\nTo understand how the circuit operates, let's trace the signal through the loop:\n\n1. Suppose the voltage at node $X$ increases ($\\Delta V_X > 0$).\n2. As $V_X$ increases, transistor $M_1$ conducts more current, pulling the output node down ($\\Delta V_{\\text{out}} < 0$) because of the inverting common-source gain:\n   $$A_1 = \\frac{v_{\\text{out}}}{v_X} = -g_{m1}(R_{D1} \\parallel r_{o1})$$\n3. A decrease in $V_{\\text{out}}$ lowers the gate-to-source voltage of $M_2$, causing $M_2$ to draw **less** current from node $X$.\n4. Since $M_2$ draws less current, the voltage at node $X$ is pushed **even higher** ($\\Delta V_X > 0$).\n\n#### **Loop Gain ($T$):**\nThe loop consists of two inverting common-source amplifiers connected back-to-back:\n$$T = A_1 \\times A_2 = \\left[-g_{m1}(R_{D1} \\parallel r_{o1})\\right] \\times \\left[-g_{m2} r_{o2}\\right] = +g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2}$$\n\nBecause the loop gain is **positive** ($T > 0$), this circuit employs **positive (regenerative) feedback**.\n\n---\n\n### **3. Small-Signal Analysis**\n\nLet:\n* $R_L = R_{D1} \\parallel r_{o1}$\n* $g_{m1}, g_{m2}$ = transconductances of $M_1, M_2$\n* $r_{o1}, r_{o2}$ = output resistances of $M_1, M_2$\n\n#### **A. Input Impedance ($R_{\\text{in}}$ at Node $X$):**\nApplying a test voltage $v_x$ at node $X$:\n1. $v_{\\text{out}} = -g_{m1} R_L v_x$\n2. The current drawn from node $X$ is:\n   $$i_x = \\frac{v_x}{r_{o2}} + g_{m2} v_{\\text{out}} = v_x \\left(\\frac{1}{r_{o2}} - g_{m1} g_{m2} R_L\\right)$$\n3. The input impedance is:\n   $$R_{\\text{in}} = \\frac{v_x}{i_x} = \\frac{r_{o2}}{1 - g_{m1} g_{m2} R_L r_{o2}} = \\frac{r_{o2}}{1 - T}$$\n\n> **Key Takeaway:** If the loop gain $T = g_{m1} g_{m2} R_L r_{o2} > 1$, the input impedance becomes **negative** ($R_{\\text{in}} < 0$). This circuit can act as a **negative resistance generator**.\n\n---\n\n#### **B. Closed-Loop Transimpedance Gain ($Z_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$):**\nApplying KCL at node $X$ and the output node:\n1. At node $X$: $i_{\\text{in}} = \\frac{v_x}{r_{o2}} + g_{m2} v_{\\text{out}} \\implies v_x = r_{o2}(i_{\\text{in}} - g_{m2} v_{\\text{out}})$\n2. At $V_{\\text{out}}$: $v_{\\text{out}} = -g_{m1} R_L v_x$\n\nSubstituting $v_x$:\n$$v_{\\text{out}} = -g_{m1} R_L r_{o2} (i_{\\text{in}} - g_{m2} v_{\\text{out}})$$\n$$v_{\\text{out}} (1 - g_{m1} g_{m2} R_L r_{o2}) = -g_{m1} R_L r_{o2} i_{\\text{in}}$$\n\n$$\\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{-g_{m1} R_L r_{o2}}{1 - g_{m1} g_{m2} R_L r_{o2}}$$\n\n---\n\n#### **C. Output Impedance ($R_{\\text{out}}$):**\nApplying a test voltage $v_t$ at $V_{\\text{out}}$ (with $i_{\\text{in}} = 0$):\n1. $v_x = -g_{m2} r_{o2} v_t$\n2. $i_t = \\frac{v_t}{R_L} + g_{m1} v_x = v_t \\left(\\frac{1}{R_L} - g_{m1} g_{m2} r_{o2}\\right)$\n\n$$R_{\\text{out}} = \\frac{R_L}{1 - g_{m1} g_{m2} R_L r_{o2}} = \\frac{R_L}{1 - T}$$\n\n---\n\n### **4. DC Large-Signal Relations (in Saturation)**\n\nAssuming both transistors remain in saturation and neglecting channel-length modulation ($\\lambda = 0$):\n\n1. **Current Balance at Node $X$:**\n   Since the gate of $M_1$ draws zero DC current, all of $I_{\\text{in}}$ flows into $M_2$:\n   $$I_{D2} = I_{\\text{in}} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{\\text{out}} - V_{TH2})^2$$\n   Solving for $V_{\\text{out}}$:\n   $$V_{\\text{out}} = V_{TH2} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{ox} (W/L)_2}}$$\n\n2. **Current in $M_1$:**\n   $$I_{D1} = \\frac{V_{DD} - V_{\\text{out}}}{R_{D1}} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_X - V_{TH1})^2$$\n   Solving for the node voltage $V_X$:\n   $$V_X = V_{TH1} + \\sqrt{\\frac{2(V_{DD} - V_{\\text{out}})}{\\mu_n C_{ox} (W/L)_1 R_{D1}}}$$\n\n3. **Conditions for Saturation:**\n   * For $M_1$: $V_{\\text{out}} \\ge V_X - V_{TH1}$\n   * For $M_2$: $V_X \\ge V_{\\text{out}} - V_{TH2}$\n\n---\n\n### **5. Summary of Circuit Characteristics**\n\n| Parameter | Value / Formula | Note |\n| :--- | :--- | :--- |\n| **Feedback Type** | Positive Feedback (Regenerative) | Two back-to-back CS stages |\n| **Loop Gain ($T$)** | $+g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2}$ | $T > 0$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\frac{r_{o2}}{1 - T}$ | Negative resistance when $T > 1$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\frac{R_L}{1 - T}$ | Negative resistance when $T > 1$ |\n| **Applications** | • Bistable Multivibrators / Latches<br>• Negative-Resistance Oscillators<br>• $Q$-enhancement in active RF filters | Utilizes positive feedback for regeneration |",
        "format": "markdown",
        "sha256": "8944f9d7511535fd1626551cf3278b4f77e519a240fdec6050745676c4987ce3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2’s gate is tied to Vout, traces the positive-feedback loop, and gives the resulting loop-gain-dependent negative input resistance for T > 1, satisfying the full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 6169,
        "total_tokens": 7287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4153,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 6169,
        "total_tokens": 7287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4153,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **two-stage Transimpedance Amplifier (TIA)** employing **shunt-shunt (voltage-current) negative feedback**. It is commonly used as a high-speed preamplifier in optical communication receivers (e.g., interfacing with a photodiode).\n\n---\n\n### 1. Circuit Architecture & Classification\n\n* **Stage 1 ($M_1$, $R_{D1}$):** **Common-Gate (CG)** Amplifier\n  * The input current $I_{\\text{in}}$ is applied to the source of $M_1$.\n  * The gate is held at a fixed DC bias voltage $V_b$ (AC ground).\n  * Node $X$ is the drain of $M_1$, providing a non-inverting voltage gain from the source.\n* **Stage 2 ($M_2$, $R_{D2}$):** **Common-Source (CS)** Amplifier\n  * The signal at node $X$ drives the gate of $M_2$.\n  * The output voltage $V_{\\text{out}}$ is taken at the drain of $M_2$, providing an inverting voltage gain.\n* **Feedback Network ($R_F$):**\n  * Resistor $R_F$ connects the output node ($V_{\\text{out}}$) back to the input node (source of $M_1$).\n  * **Feedback Type:** **Shunt-Shunt (Voltage-Current)** feedback (samples output voltage, subtracts/adds current at the input).\n\n---\n\n### 2. Qualitative Operation and Feedback Polarity\n\n1. If $I_{\\text{in}}$ increases (injecting current into the source of $M_1$):\n   * The source voltage of $M_1$ ($V_{\\text{in}}$) tends to rise.\n   * $V_{GS1} = V_b - V_{\\text{in}}$ decreases, reducing the drain current of $M_1$.\n   * The voltage at node $X$ rises: $V_X \\uparrow$.\n2. As $V_X$ rises:\n   * The gate voltage of $M_2$ increases, increasing the current through $M_2$.\n   * The output voltage drops: $V_{\\text{out}} \\downarrow$.\n3. As $V_{\\text{out}}$ drops:\n   * The feedback current $i_{RF} = \\frac{V_{\\text{out}} - V_{\\text{in}}}{R_F}$ decreases (or draws more current away from the source node).\n   * This pulls the input node voltage $V_{\\text{in}}$ back down, counteracting the initial change.\n4. **Conclusion:** The overall loop possesses an odd number of signal inversions, confirming **negative feedback**.\n\n---\n\n### 3. Small-Signal Analysis\n\nAssuming channel-length modulation and body effect are negligible ($\\lambda = 0, \\gamma = 0$):\n\n#### A. Node Equations\n1. **At the Input Node ($V_{\\text{in}}$):**\n   $$i_{\\text{in}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{R_F} = g_{m1} v_{\\text{in}}$$\n   $$i_{\\text{in}} + \\frac{v_{\\text{out}}}{R_F} = v_{\\text{in}} \\left( g_{m1} + \\frac{1}{R_F} \\right)$$\n\n2. **At Node $X$:**\n   $$v_X = g_{m1} R_{D1} v_{\\text{in}}$$\n\n3. **At the Output Node ($V_{\\text{out}}$):**\n   $$\\frac{v_{\\text{out}}}{R_{D2}} + g_{m2} v_X + \\frac{v_{\\text{out}} - v_{\\text{in}}}{R_F} = 0$$\n\n#### B. Closed-Loop Transimpedance Gain ($R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)\n\nSubstituting $v_X$ and relating $v_{\\text{in}}$ to $v_{\\text{out}}$:\n$$v_{\\text{out}} \\left( \\frac{1}{R_{D2}} + \\frac{1}{R_F} \\right) \\approx - g_{m2} (g_{m1} R_{D1} v_{\\text{in}})$$\n\nWhen the loop gain is sufficiently large ($g_{m1} g_{m2} R_{D1} R_{D2} \\gg 1$), almost all the input current flows through the feedback resistor $R_F$:\n$$R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx -R_F$$\n\n---\n\n### 4. Loop Gain ($T$)\n\nThe loop gain can be found by evaluating the open-loop forward gain and feedback factor:\n* **Forward Gain from $V_{\\text{in}}$ to $V_{\\text{out}}$:**\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx -g_{m1} R_{D1} \\cdot g_{m2} (R_{D2} \\parallel R_F)$$\n* **Feedback Factor ($\\beta$):**\n  $$\\beta \\approx \\frac{1/g_{m1}}{1/g_{m1} + R_F} = \\frac{1}{1 + g_{m1} R_F}$$\n* **Loop Gain ($T$):**\n  $$T = |A_v \\beta| \\approx \\frac{g_{m1} g_{m2} R_{D1} (R_{D2} \\parallel R_F)}{1 + g_{m1} R_F}$$\n\n---\n\n### 5. Input and Output Impedance\n\nDue to the **shunt** connection at both input and output ports:\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  Without feedback, the common-gate input impedance is $R_{\\text{in,open}} \\approx \\frac{1}{g_{m1}}$. With negative feedback:\n  $$R_{\\text{in}} = \\frac{R_{\\text{in,open}}}{1 + T} \\approx \\frac{1}{g_{m1}(1 + T)}$$\n  *This extremely low input impedance is ideal for a current-sensing amplifier.*\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  Without feedback, $R_{\\text{out,open}} \\approx R_{D2}$. With negative feedback:\n  $$R_{\\text{out}} = \\frac{R_{D2}}{1 + T}$$\n  *This provides a low output resistance, making it suitable for driving subsequent voltage stages.*\n\n---\n\n### 6. Key Advantages & Design Insights\n\n1. **High Bandwidth:** A photodiode connected at the input introduces a relatively large parasitic capacitance $C_{\\text{in}}$. Because $R_{\\text{in}}$ is reduced by $(1+T)$, the input pole $\\omega_p = \\frac{1}{R_{\\text{in}} C_{\\text{in}}}$ is pushed to significantly higher frequencies.\n2. **Low Noise and Distortion:** Feedback improves linearity and stabilizes the transimpedance gain against process, voltage, and temperature (PVT) variations.\n3. **No Miller Multiplication at Input:** The common-gate input stage naturally prevents Miller effect on $C_{gd1}$, enhancing high-frequency performance.",
        "format": "markdown",
        "sha256": "ba98e2d5c771305a05913d4b9958037471be3aebdb2b81ae91257720674d384d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as a common-source stage driven by X, and RF as feedback from Vout to the input node, forming a negative-feedback transimpedance amplifier. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 5554,
        "total_tokens": 6647,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3914,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 5554,
        "total_tokens": 6647,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3914,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a classic **two-stage Transimpedance Amplifier (TIA)** with **shunt-shunt negative feedback**, widely used in optical communication front-ends and photodiode sensor interfaces.\n\n---\n\n### 1. Circuit Topology & Identification\n\nThe circuit consists of:\n1. **First Stage ($M_1, R_{\\text{D1}}$): Common-Gate (CG) Amplifier**\n   - Gate is biased at a constant DC voltage $V_b$ (AC small-signal ground).\n   - The input current signal $I_{\\text{in}}$ is injected at the source terminal of $M_1$.\n   - The output of this stage is taken at the drain node $X$ across load resistor $R_{\\text{D1}}$.\n2. **Second Stage ($M_2, R_{\\text{D2}}$): Common-Source (CS) Amplifier**\n   - The gate of $M_2$ is driven by node $X$.\n   - The source is connected to ground.\n   - The output voltage $V_{\\text{out}}$ is taken at the drain across load resistor $R_{\\text{D2}}$.\n3. **Feedback Network ($R_F$)**:\n   - A feedback resistor $R_F$ connects the output node $V_{\\text{out}}$ back to the input node (the source of $M_1$).\n   - Because it connects from a voltage node ($V_{\\text{out}}$) to a current-summing node (input), this is **shunt-shunt feedback**.\n\n---\n\n### 2. Qualitative Operation & Feedback Polarity\n\nTo verify that the feedback is **negative**:\n1. Suppose the input current $I_{\\text{in}}$ increases into the source node.\n2. The source voltage $V_{\\text{in}}$ tends to increase ($\\Delta V_{\\text{in}} > 0$).\n3. As $V_{\\text{in}}$ rises, the gate-to-source voltage $V_{GS1} = V_b - V_{\\text{in}}$ decreases, which **decreases** the drain current through $M_1$.\n4. Less current through $R_{\\text{D1}}$ means the voltage drop across $R_{\\text{D1}}$ decreases, causing the voltage at node $X$ to **rise** ($\\Delta V_X > 0$). (The CG stage is **non-inverting**, $A_{v1} > 0$).\n5. A rising $V_X$ increases the gate-to-source voltage of $M_2$, drawing more current through $R_{\\text{D2}}$, which pulls the output voltage **down** ($\\Delta V_{\\text{out}} < 0$). (The CS stage is **inverting**, $A_{v2} < 0$).\n6. As $V_{\\text{out}}$ falls, it pulls current $i_{RF}$ away from the source of $M_1$ through $R_F$, counteracting the initial increase in $V_{\\text{in}}$.\n\nSince the response opposes the disturbance, the feedback loop is **negative**.\n\n---\n\n### 3. Small-Signal Quantitative Analysis\n\nAssuming channel-length modulation is negligible ($r_o \\to \\infty$) and denoting the small-signal transconductances as $g_{m1}$ (including body effect as $g_{m1} + g_{mb1}$ if applicable) and $g_{m2}$:\n\n#### A. Node Equations\n* **At node $X$:**\n  $$v_X = g_{m1} R_{\\text{D1}} v_{\\text{in}}$$\n\n* **At node $V_{\\text{out}}$:**\n  $$g_{m2} v_X + \\frac{v_{\\text{out}}}{R_{\\text{D2}}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{R_F} = 0$$\n  Substituting $v_X$:\n  $$v_{\\text{out}} \\left(\\frac{1}{R_{\\text{D2}}} + \\frac{1}{R_F}\\right) = -v_{\\text{in}} \\left(g_{m1} g_{m2} R_{\\text{D1}} - \\frac{1}{R_F}\\right)$$\n  Since open-loop forward gain $g_{m1} g_{m2} R_{\\text{D1}} \\gg 1/R_F$:\n  $$v_{\\text{in}} \\approx - \\frac{v_{\\text{out}}}{g_{m1} g_{m2} R_{\\text{D1}} (R_{\\text{D2}} \\parallel R_F)}$$\n\n* **At input node ($v_{\\text{in}}$):**\n  $$I_{\\text{in}} = g_{m1} v_{\\text{in}} + \\frac{v_{\\text{in}} - v_{\\text{out}}}{R_F}$$\n\n---\n\n#### B. Closed-Loop Transimpedance Gain ($Z_T = \\frac{v_{\\text{out}}}{I_{\\text{in}}}$)\n\nSubstituting $v_{\\text{in}}$ into the input equation yields:\n$$Z_T = \\frac{v_{\\text{out}}}{I_{\\text{in}}} = - \\frac{R_F - \\frac{1}{g_{m1} g_{m2} R_{\\text{D1}}}}{1 + \\frac{1 + g_{m1}(R_F + R_{\\text{D2}})}{g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}}}}$$\n\nExpressed in terms of the loop gain $T$:\n$$Z_T = - R_F \\frac{T}{1 + T}$$\n\nWhere the **loop gain** $T$ is:\n$$T = \\frac{g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}}}{1 + g_{m1}(R_F + R_{\\text{D2}})}$$\n\nFor large loop gain ($T \\gg 1$):\n$$\\mathbf{Z_T \\approx -R_F}$$\n\nThe transimpedance gain is set primarily by the feedback resistor $R_F$.\n\n---\n\n#### C. Input Resistance ($R_{\\text{in}}$)\n\nThe input resistance is dramatically reduced by both the common-gate input stage and the shunt feedback:\n$$R_{\\text{in}} = \\frac{v_{\\text{in}}}{I_{\\text{in}}} = \\frac{R_F + R_{\\text{D2}}}{1 + g_{m1}(R_F + R_{\\text{D2}}) + g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}}}$$\n\nFor high gain ($T \\gg 1$):\n$$R_{\\text{in}} \\approx \\frac{R_F + R_{\\text{D2}}}{g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}}} \\approx \\frac{1}{g_{m1} \\cdot T}$$\n\nThis yields an **extremely low input resistance**, which is the main motivation for this architecture.\n\n---\n\n#### D. Output Resistance ($R_{\\text{out}}$)\n\nLooking into the output node:\n$$R_{\\text{out}} = \\frac{R_{\\text{out,open}}}{1 + T} \\approx \\frac{R_{\\text{D2}} \\parallel (R_F + 1/g_{m1})}{1 + T} \\approx \\frac{R_F}{g_{m2} R_{\\text{D1}}}$$\n\nThe shunt feedback lowers the output resistance, enabling it to drive subsequent stages or capacitive loads effectively.\n\n---\n\n### 4. Frequency Response & Bandwidth\n\nIn optical receiver applications, a photodiode at the input introduces a significant parasitic capacitance $C_{\\text{in}} \\approx C_{\\text{PD}} + C_{gs1}$.\n\n1. **Input Pole:**\n   $$\\omega_{p,\\text{in}} = \\frac{1}{R_{\\text{in}} C_{\\text{in}}}$$\n   Because $R_{\\text{in}}$ is reduced by the loop gain to just a few ohms, the input pole is pushed to **very high frequencies**, preventing the photodiode capacitance from limiting the system bandwidth.\n2. **Intermediate Pole (Node $X$):**\n   $$C_X \\approx C_{gd1} + C_{db1} + C_{gs2} + (1 + g_{m2} R_{\\text{D2}}) C_{gd2}$$\n   $$\\omega_{p, X} \\approx \\frac{1}{R_{\\text{D1}} C_X}$$\n   Due to the Miller multiplication of $C_{gd2}$ in $M_2$, node $X$ is often the **dominant pole** of the amplifier.\n3. **Output Pole:**\n   $$\\omega_{p,\\text{out}} \\approx \\frac{1}{R_{\\text{out}} C_L}$$\n   Typically located at very high frequency due to low $R_{\\text{out}}$.\n\n---\n\n### 5. Noise Analysis\n\nThe input-referred noise current spectral density $\\overline{i_{n,\\text{in}}^2}$ determines the sensitivity:\n\n1. **Feedback Resistor $R_F$:**\n   $$\\overline{i_{n, R_F}^2} = \\frac{4kT}{R_F}$$\n   This is directly referred to the input and usually forms the dominant noise floor at low-to-moderate frequencies. Thus, **$R_F$ should be maximized** to reduce noise.\n2. **Input Transistor $M_1$:**\n   At low frequencies, because the input current source has high impedance, the channel noise of $M_1$ has no path to flow to ground through the input. At higher frequencies, $C_{\\text{in}}$ shunts the source, causing $M_1$'s noise contribution to rise:\n   $$\\overline{i_{n,\\text{in}, M1}^2} \\approx 4kT \\gamma g_{m1} \\frac{\\omega^2 C_{\\text{in}}^2}{g_{m1}^2} = \\frac{4kT \\gamma \\omega^2 C_{\\text{in}}^2}{g_{m1}}$$\n3. **Resistor $R_{\\text{D1}}$ and Transistor $M_2$:**\n   Their noise contributions are divided by the transconductance gain of $M_1$, making them second-order effects.\n\n---\n\n### Summary of Key Features\n\n| Metric | Expression / Behavior |\n| :--- | :--- |\n| **Transimpedance Gain ($Z_T$)** | $\\approx -R_F$ |\n| **Input Resistance ($R_{\\text{in}}$)** | Very Low ($\\approx \\frac{1}{g_{m1} T}$) |\n| **Output Resistance ($R_{\\text{out}}$)** | Low ($\\approx \\frac{R_F}{g_{m2} R_{\\text{D1}}}$) |\n| **Dominant Pole** | Typically at node $X$ (Miller effect of $M_2$) |\n| **Key Advantage** | Decouples large input photodiode capacitance from the bandwidth limitation while maintaining high transimpedance gain. |",
        "format": "markdown",
        "sha256": "d98ea8da527b0bb2915907d20002e6b24ff393f3e94ae4ea3c53b7132e028675"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a negative-feedback transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 17555,
        "total_tokens": 18649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 17555,
        "total_tokens": 18649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **two-stage Transimpedance Amplifier (TIA) with Shunt-Shunt Negative Feedback**, widely used in optical communication receivers and sensor interfaces to convert an input current $I_{\\text{in}}$ into an output voltage $V_{\\text{out}}$.\n\n---\n\n### 1. Circuit Architecture\n\nThe circuit consists of two gain stages enclosed in a global feedback loop:\n\n1. **First Stage (Common-Gate Amplifier — $M_1, R_{D1}$):**\n   * **Input:** Source of $M_1$.\n   * **Bias:** Fixed gate voltage $V_b$.\n   * **Load:** Resistor $R_{D1}$.\n   * **Function:** Provides non-inverting voltage gain from the source to node $X$, presenting an inherently low input impedance to accept the current $I_{\\text{in}}$.\n\n2. **Second Stage (Common-Source Amplifier — $M_2, R_{D2}$):**\n   * **Input:** Gate of $M_2$ (connected to node $X$).\n   * **Load:** Resistor $R_{D2}$.\n   * **Function:** Provides an inverting voltage gain from node $X$ to $V_{\\text{out}}$.\n\n3. **Feedback Network ($R_F$):**\n   * Connected between the output voltage node $V_{\\text{out}}$ and the input current node at the source of $M_1$.\n\n---\n\n### 2. Feedback Type and Stability (Polarity)\n\n* **Feedback Topology:** **Shunt-Shunt (Voltage-Current)**\n  * **Output sensing:** Senses output **voltage** (shunt connection at $V_{\\text{out}}$).\n  * **Input mixing:** Injects feedback **current** $i_{RF}$ (shunt connection at input).\n\n* **Negative Feedback Verification:**\n  1. Suppose $I_{\\text{in}}$ increases $\\rightarrow$ source voltage $V_{\\text{in}}$ of $M_1$ tends to rise.\n  2. $V_{GS1} = (V_b - V_{\\text{in}})$ decreases $\\rightarrow$ drain current of $M_1$ decreases.\n  3. Voltage at node $X$ rises: $V_X \\uparrow$.\n  4. Rising $V_X$ increases the gate voltage of $M_2 \\rightarrow$ drain current of $M_2$ increases.\n  5. Output voltage drops: $V_{\\text{out}} \\downarrow$.\n  6. A lower $V_{\\text{out}}$ pulls feedback current $i_{RF}$ away from the input node, opposing the initial rise in $V_{\\text{in}}$.\n  \n  $\\implies$ **The loop provides negative feedback.**\n\n---\n\n### 3. Small-Signal Analysis & Closed-Loop Gain\n\nAssuming negligible channel-length modulation ($\\lambda \\approx 0$) and body effect:\n\n#### Small-Signal Equations:\n1. **At the Input Node ($V_{\\text{in}}$):**\n   $$I_{\\text{in}} + \\frac{V_{\\text{out}} - V_{\\text{in}}}{R_F} = g_{m1} V_{\\text{in}}$$\n\n2. **At Node $X$:**\n   $$V_X = g_{m1} R_{D1} V_{\\text{in}}$$\n\n3. **At the Output Node ($V_{\\text{out}}$):**\n   $$\\frac{V_{\\text{out}}}{R_{D2}} + g_{m2} V_X + \\frac{V_{\\text{out}} - V_{\\text{in}}}{R_F} = 0$$\n\n#### Forward Open-Loop Gain ($A_v = V_{\\text{out}} / V_{\\text{in}}$):\n$$A_v = -g_{m1} g_{m2} R_{D1} (R_{D2} \\parallel R_F)$$\n\n#### Closed-Loop Transimpedance Gain ($R_m = \\frac{V_{\\text{out}}}{I_{\\text{in}}}$):\nCombining the nodal equations:\n$$R_m = \\frac{V_{\\text{out}}}{I_{\\text{in}}} = \\frac{A_v R_F}{(1 + g_{m1} R_F) - A_v}$$\n\nFor a high loop gain ($|A_v| \\gg 1 + g_{m1} R_F$):\n$$\\boxed{R_m = \\frac{V_{\\text{out}}}{I_{\\text{in}}} \\approx -R_F}$$\n\n*The transimpedance gain is primarily determined by the feedback resistor $R_F$, ensuring high linearity and gain stability over temperature and process variations.*\n\n---\n\n### 4. Input and Output Impedance\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  Without feedback, the input resistance of the Common-Gate stage is $R_{\\text{in, open}} \\approx \\frac{1}{g_{m1}}$.\n  With shunt negative feedback, the input resistance is further reduced:\n  $$R_{\\text{in}} \\approx \\frac{R_F + R_{D2}}{1 + g_{m1} g_{m2} R_{D1} R_{D2}} \\ll \\frac{1}{g_{m1}}$$\n  *A very low input impedance creates a virtual ground, ideal for receiving current signals without creating large voltage swings.*\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  Due to shunt feedback at the output:\n  $$R_{\\text{out}} \\approx \\frac{R_{D2} \\parallel R_F}{1 + T} \\ll R_{D2}$$\n  *(where $T$ is the loop gain).*\n\n---\n\n### 5. Summary of Circuit Characteristics\n\n| Parameter | Behavior | Advantage |\n| :--- | :--- | :--- |\n| **Gain ($V_{\\text{out}}/I_{\\text{in}}$)** | $\\approx -R_F$ | Highly linear and well-controlled |\n| **Input Impedance ($R_{\\text{in}}$)** | Extremely Low | Pushes the input pole to high frequencies (wide bandwidth for large input capacitance, such as photodiodes) |\n| **Output Impedance ($R_{\\text{out}}$)** | Low | Good voltage drive capability |\n| **Primary Application** | Transimpedance Amplifier (TIA) | Optical receivers, sensors, and instrumentation |",
        "format": "markdown",
        "sha256": "52d87bfcedfbbf69c2297368e4f967ac3f94c2edcc812f53f268d906292ddd7b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a negative-feedback TIA. This satisfies the golden solution’s full-credit rule; minor small-signal approximation issues do not alter the essential answer.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4650,
        "total_tokens": 5743,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3247,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4650,
        "total_tokens": 5743,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3247,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed analysis of the given circuit.\n\n---\n\n### **1. Circuit Overview and Identification**\n\n* **Circuit Type:** Active-Feedback **Transimpedance Amplifier (TIA)** (Current-to-Voltage Converter).\n* **Feedback Topology:** **Shunt-Shunt Negative Feedback** (senses output voltage $V_{\\text{out}}$ and feeds back a current to the input node).\n* **Transistors:**\n  * **$M_1$ (NMOS):** Configured as a **Common-Gate (CG)** amplifier stage loaded by the current source $I_1$.\n  * **$M_2$ (PMOS):** Configured as a **Common-Source (CS)** feedback device converting the output voltage $V_{\\text{out}}$ into a feedback current at the input node.\n\n---\n\n### **2. Qualitative / Large-Signal Operation**\n\n1. **DC Biasing:**\n   * The current source $I_1$ sets the bias current of $M_1$: $I_{D1} = I_1$.\n   * At the input node (let's call it node $X$), by Kirchhoff's Current Law (KCL):\n     $$I_{D2} + I_{\\text{in}} = I_{D1} + I_{\\text{bias}} \\implies I_{D2} = I_1 + I_{\\text{bias}} - I_{\\text{in}}$$\n   * Thus, changes in $I_{\\text{in}}$ directly modulate the drain current of $M_2$.\n\n2. **Negative Feedback Mechanism:**\n   * Suppose the input current $I_{\\text{in}}$ increases:\n     $$\\Delta I_{\\text{in}} \\uparrow \\;\\implies\\; V_X \\uparrow$$\n   * Since the gate of $M_1$ is at a fixed bias $V_b$, an increase in $V_X$ reduces $V_{GS1} = V_b - V_X$:\n     $$V_{GS1} \\downarrow \\;\\implies\\; I_{D1} \\downarrow$$\n   * Because $I_1$ is fixed, the reduction in $I_{D1}$ pulls the output voltage up:\n     $$V_{\\text{out}} \\uparrow$$\n   * As $V_{\\text{out}}$ rises, the gate-source voltage of PMOS $M_2$ becomes less negative ($|V_{GS2}| = V_{DD} - V_{\\text{out}}$ decreases):\n     $$I_{D2} \\downarrow$$\n   * The reduction in $I_{D2}$ absorbs the increase in $I_{\\text{in}}$, stabilizing the input node $X$ near a virtual ground.\n\n---\n\n### **3. Small-Signal Analysis**\n\nLet:\n* $g_{m1}, g_{mb1}, r_{o1}$ be the parameters of $M_1$ (with $g_{m1}' = g_{m1} + g_{mb1}$).\n* $g_{m2}, r_{o2}$ be the parameters of $M_2$.\n* Assume the DC current sources are ideal (infinite impedance).\n\n#### **A. Transimpedance Gain ($R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)**\n\n1. **At node $V_{\\text{out}}$:**\n   Because current source $I_1$ is ideal, the small-signal current through $M_1$ must equal zero:\n   $$i_{d1} = -g_{m1}' v_x + \\frac{v_{\\text{out}} - v_x}{r_{o1}} = 0$$\n   $$v_{\\text{out}} = \\left(1 + g_{m1}' r_{o1}\\right) v_x \\implies v_x = \\frac{v_{\\text{out}}}{1 + g_{m1}' r_{o1}}$$\n\n2. **At input node $X$:**\n   Applying KCL at node $X$ (noting $i_{d1} = 0$):\n   $$i_{\\text{in}} + i_{d2} = 0$$\n   where $i_{d2} = -g_{m2} v_{\\text{out}} - \\frac{v_x}{r_{o2}}$.\n   \n   Substituting $v_x$:\n   $$i_{\\text{in}} = g_{m2} v_{\\text{out}} + \\frac{v_{\\text{out}}}{r_{o2}(1 + g_{m1}' r_{o1})}$$\n\n3. **Closed-Loop Gain:**\n   $$R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2} + \\frac{1}{r_{o2}(1 + g_{m1}' r_{o1})}} \\approx \\frac{1}{g_{m2}}$$\n\n---\n\n#### **B. Input Resistance ($R_{\\text{in}}$)**\n\nThe input resistance is given by $R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}}$:\n$$R_{\\text{in}} = \\frac{R_m}{1 + g_{m1}' r_{o1}} \\approx \\frac{1}{g_{m2} g_{m1}' r_{o1}}$$\n\n* **Key Takeaway:** The input resistance is extremely small because the intrinsic resistance $\\approx \\frac{1}{g_{m2}}$ is further reduced by the gain of the common-gate stage ($A_v \\approx g_{m1}' r_{o1}$).\n\n---\n\n#### **C. Output Resistance ($R_{\\text{out}}$)**\n\nIf a test voltage $v_t$ is applied at the output with $i_{\\text{in}} = 0$:\n$$R_{\\text{out}} \\approx r_{o1} \\left(1 + g_{m1}' (r_{o2} \\parallel R_{\\text{bias}})\\right) \\parallel \\dots$$\nWith ideal current sources, $R_{\\text{out}}$ is dominated by the loop gain:\n$$R_{\\text{out}} \\approx \\frac{r_{o1} + r_{o2}(1 + g_{m1}' r_{o1})}{1 + g_{m2} r_{o2} (1 + g_{m1}' r_{o1})} \\approx \\frac{1}{g_{m2}}$$\n\n---\n\n### **4. Summary of Key Characteristics**\n\n| Parameter | Exact Expression | Approximation |\n| :--- | :--- | :--- |\n| **Transimpedance Gain ($R_m$)** | $\\dfrac{1}{g_{m2} + \\frac{1}{r_{o2}(1 + g_{m1}' r_{o1})}}$ | $\\mathbf{\\approx \\dfrac{1}{g_{m2}}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\dfrac{R_m}{1 + g_{m1}' r_{o1}}$ | $\\mathbf{\\approx \\dfrac{1}{g_{m1}' g_{m2} r_{o1}}}$ |\n| **Feedback Type** | Shunt-Shunt | Negative |\n\n### **5. Applications**\n* **Optical Receivers:** Used as a front-end transimpedance amplifier for photodiodes. The extremely low $R_{\\text{in}}$ pushes the input pole $\\omega_p \\approx \\frac{1}{R_{\\text{in}} C_{\\text{diode}}}$ to very high frequencies, preventing large photodiode capacitance from limiting the circuit's bandwidth.\n* **Regulated Cascode Current Mirrors / Buffers:** Provides high linearity and stable current-to-voltage conversion.",
        "format": "markdown",
        "sha256": "17931ae7bb48e3e6c596d73f94f5b13deb5437809103febfd9cc2dd9eb4a0c78"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, describes feedback to the input node, and gives the low input resistance and vout/iin ≈ 1/gm2. Minor modeling details do not change the essential analysis.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5781,
        "total_tokens": 6869,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5781,
        "total_tokens": 6869,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Transimpedance Amplifier (TIA)** employing an active **shunt-shunt negative feedback** loop. It is widely used as a low-noise, broadband front-end amplifier (for example, in optical receivers to convert a photodiode's current into a voltage).\n\n---\n\n### 1. Circuit Topology and Component Roles\n\n* **$M_1$ (NMOS):** Configured as a **Common-Gate (CG)** stage with a fixed DC bias voltage $V_b$ applied to its gate. It senses the input current signal at its source (node $X$) and produces a voltage at its drain ($V_{\\text{out}}$).\n* **$M_2$ (PMOS):** Configured as a **Common-Source (CS)** feedback stage. It senses the output voltage $V_{\\text{out}}$ at its gate and feeds back a current into the input node through its drain.\n* **$I_1$:** An ideal DC current source acting as an active pull-up load for the common-gate transistor $M_1$.\n* **Current Sink (at the input node):** Provides the necessary DC bias current path to ground for $M_1$ and $M_2$.\n* **$I_{\\text{in}}$:** Small-signal input current.\n\n---\n\n### 2. Qualitative / Feedback Operation\n\n1. Suppose the input current $I_{\\text{in}}$ increases, which tends to pull up the voltage $V_X$ at the input node.\n2. As $V_X$ rises, the gate-to-source voltage of $M_1$ ($V_{GS1} = V_b - V_X$) decreases, causing the drain current $I_{D1}$ to decrease.\n3. Since the current source $I_1$ supplies a constant current, the reduction in $I_{D1}$ causes the output node voltage $V_{\\text{out}}$ to **rise**.\n4. An increase in $V_{\\text{out}}$ reduces the source-to-gate voltage of the PMOS transistor $M_2$ ($V_{SG2} = V_{DD} - V_{\\text{out}}$), decreasing the drain current $I_{D2}$ supplied by $M_2$ to node $X$.\n5. A lower current injected into node $X$ counteracts the initial rise in $V_X$.\n\nBecause the feedback action opposes the change at the input, this establishes **negative feedback** with a **shunt-shunt** topology (current sampled at the output and fed back in parallel at the input).\n\n---\n\n### 3. Small-Signal Analysis\n\nLet:\n* $g_{m1}, g_{mb1}, r_{O1}$ be the parameters for $M_1$ (let $g_{m1}^* = g_{m1} + g_{mb1}$).\n* $g_{m2}, r_{O2}$ be the parameters for $M_2$.\n* The bias current sources be ideal ($r_o \\to \\infty$).\n\n#### A. Transimpedance Gain ($R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)\n\nApplying KCL at the output node ($V_{\\text{out}}$):\n$$\\frac{v_{\\text{out}} - v_x}{r_{O1}} - g_{m1}^* v_x = 0 \\implies v_{\\text{out}} = (1 + g_{m1}^* r_{O1}) v_x$$\n\nApplying KCL at the input node ($v_x$):\n$$i_{\\text{in}} + i_{d2} - i_{d1} = 0$$\n\nSince $i_{d1} = 0$ (due to the ideal current source $I_1$), we have $i_{\\text{in}} = -i_{d2}$:\n$$i_{\\text{in}} = g_{m2} v_{\\text{out}} + \\frac{v_x}{r_{O2}}$$\n\nSubstituting $v_x = \\frac{v_{\\text{out}}}{1 + g_{m1}^* r_{O1}}$:\n$$i_{\\text{in}} = \\left[ g_{m2} + \\frac{1}{(1 + g_{m1}^* r_{O1}) r_{O2}} \\right] v_{\\text{out}}$$\n\nThus, the closed-loop transimpedance gain is:\n$$R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1 + g_{m1}^* r_{O1}}{g_{m2}(1 + g_{m1}^* r_{O1}) + \\frac{1}{r_{O2}}}$$\n\nAssuming $g_{m1}^* r_{O1} \\gg 1$ and $g_{m2} r_{O2} \\gg 1$:\n$$\\mathbf{R_T \\approx \\frac{1}{g_{m2}}}$$\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}}$)\n\nFrom the KCL at the input node:\n$$i_{\\text{in}} = \\left[ g_{m2}(1 + g_{m1}^* r_{O1}) + \\frac{1}{r_{O2}} \\right] v_x$$\n\n$$R_{\\text{in}} = \\frac{1}{g_{m2}(1 + g_{m1}^* r_{O1}) + \\frac{1}{r_{O2}}}$$\n\nUnder the practical assumption $g_{m1}^* r_{O1} \\gg 1$:\n$$\\mathbf{R_{\\text{in}} \\approx \\frac{1}{g_{m2} g_{m1}^* r_{O1}}}$$\n\n> **Key Takeaway:** The input impedance is extremely low because it is reduced by the loop gain of the amplifier ($\\approx g_{m1}^* r_{O1}$). This pushes the input pole to very high frequencies, enabling high-bandwidth current sensing.\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\n\nTo calculate $R_{\\text{out}}$, set $i_{\\text{in}} = 0$ and apply a test voltage source $v_t$ at the output node $V_{\\text{out}}$:\n\n1. KCL at node $X$:\n   $$i_t = g_{m2} v_t + \\frac{v_x}{r_{O2}} \\implies v_x = r_{O2}(i_t - g_{m2} v_t)$$\n\n2. Current through $M_1$:\n   $$i_t = \\frac{v_t - v_x}{r_{O1}} - g_{m1}^* v_x = \\frac{v_t}{r_{O1}} - \\left( g_{m1}^* + \\frac{1}{r_{O1}} \\right) v_x$$\n\n3. Substituting $v_x$ yields:\n   $$R_{\\text{out}} = \\frac{v_t}{i_t} = \\frac{r_{O1} + (1 + g_{m1}^* r_{O1}) r_{O2}}{1 + g_{m2} r_{O2} (1 + g_{m1}^* r_{O1})}$$\n\nApproximating for $g_{m1}^* r_{O1} \\gg 1$ and large intrinsic gains:\n$$\\mathbf{R_{\\text{out}} \\approx \\frac{1}{g_{m2}}}$$\n\n---\n\n### 4. Summary of Key Results\n\n| Parameter | Exact Expression | Approximation |\n| :--- | :--- | :--- |\n| **Feedback Type** | Shunt-Shunt Negative Feedback | — |\n| **Transimpedance Gain ($R_T$)** | $\\frac{1 + g_{m1}^* r_{O1}}{g_{m2}(1 + g_{m1}^* r_{O1}) + 1/r_{O2}}$ | $\\approx \\dfrac{1}{g_{m2}}$ |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\frac{1}{g_{m2}(1 + g_{m1}^* r_{O1}) + 1/r_{O2}}$ | $\\approx \\dfrac{1}{g_{m2} g_{m1}^* r_{O1}}$ |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\frac{r_{O1} + (1 + g_{m1}^* r_{O1}) r_{O2}}{1 + g_{m2} r_{O2} (1 + g_{m1}^* r_{O1})}$ | $\\approx \\dfrac{1}{g_{m2}}$ |",
        "format": "markdown",
        "sha256": "d91ea2d87657411ea7176c1a895cbcc0b002cf175978aa3c094aa502b3908b62"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device, describes the loop back to the input node, and gives the very low input resistance and approximately 1/gm2 transimpedance/output resistance required for full credit.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 8084,
        "total_tokens": 9172,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 8084,
        "total_tokens": 9172,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Common-Gate Transimpedance Amplifier (CG-TIA) with Active PMOS Feedback**. It is commonly employed as a front-end amplifier in optical communications and sensor readouts to convert an input current $I_{\\text{in}}$ (e.g., from a photodiode) into an output voltage $V_{\\text{out}}$.\n\n---\n\n### 1. Circuit Identification and Roles of Components\n\n* **$M_1$ (NMOS):** Configured as a **Common-Gate (CG)** stage with a fixed gate bias $V_b$.\n* **$M_2$ (PMOS):** Acts as an **active feedback transistor**; its gate senses the output voltage $V_{\\text{out}}$ and injects feedback current into the input node at its drain.\n* **$I_1$:** An active load current source connected to $V_{DD}$, supplying bias current to $M_1$.\n* **Current Sink (bottom):** Sets the DC bias current of the input branch ($I_{\\text{bias}} = I_{D1} + I_{D2} = I_1 + I_{D2}$).\n* **$I_{\\text{in}}$:** The small-signal input current source.\n\n---\n\n### 2. Intuitive / Large-Signal Operation (Negative Feedback)\n\n1. **Input Current Injected:** When input current $I_{\\text{in}}$ increases, it injects charge into the input node $X$ (the source of $M_1$), causing the voltage $V_X$ to rise.\n2. **CG Action:** A rise in $V_X$ decreases the gate-to-source voltage of $M_1$ ($V_{GS1} = V_b - V_X$), reducing the current drawn by $M_1$.\n3. **Output Voltage Response:** Since current source $I_1$ supplies a constant current, the reduction in $M_1$'s current causes the high-impedance output node $V_{\\text{out}}$ to **rise** ($\\Delta V_{\\text{out}} > 0$).\n4. **Feedback Mechanism:** As $V_{\\text{out}}$ rises, the source-to-gate voltage of PMOS $M_2$ ($V_{SG2} = V_{DD} - V_{\\text{out}}$) decreases. Consequently, $M_2$ supplies **less** current into node $X$, pulling $V_X$ back down.\n\nThis confirms that the loop operates with **negative feedback**, stabilizing node $X$ and creating a low input impedance.\n\n---\n\n### 3. Small-Signal Analysis\n\nLet:\n* $g_{m1}, r_{O1}$ be the transconductance and output resistance of $M_1$.\n* $g_{m2}, r_{O2}$ be the transconductance and output resistance of $M_2$.\n* $v_x, v_{\\text{out}}$ be the small-signal voltages at node $X$ and the output node, respectively.\n\n#### A. Transimpedance Gain ($R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)\n\nAssuming the current source $I_1$ is ideal (infinite output resistance), the small-signal AC current through the output node must sum to zero:\n$$i_{d1} = 0 \\implies -g_{m1}v_x + \\frac{v_{\\text{out}} - v_x}{r_{O1}} = 0$$\n\n$$v_{\\text{out}} = (1 + g_{m1}r_{O1})v_x \\implies v_x = \\frac{v_{\\text{out}}}{1 + g_{m1}r_{O1}}$$\n\nApplying Kirchhoff’s Current Law (KCL) at input node $X$:\n$$i_{\\text{in}} + i_{d2} - i_{d1} = 0$$\n\nSince $i_{d1} = 0$, the entire small-signal current $i_{\\text{in}}$ is absorbed by $M_2$:\n$$i_{\\text{in}} = -i_{d2} = g_{m2}v_{\\text{out}} + \\frac{v_x}{r_{O2}}$$\n\nSubstituting $v_x$:\n$$i_{\\text{in}} = v_{\\text{out}} \\left( g_{m2} + \\frac{1}{(1 + g_{m1}r_{O1})r_{O2}} \\right)$$\n\nSince $g_{m1}r_{O1} \\gg 1$ and $g_{m2} \\gg \\frac{1}{g_{m1}r_{O1}r_{O2}}$:\n$$\\boxed{R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx \\frac{1}{g_{m2}}}$$\n\n*(If $I_1$ has a finite output resistance $R_L$, $R_T \\approx \\frac{1}{g_{m2} + 1/R_L}$.)*\n\n---\n\n#### B. Input Resistance ($R_{\\text{in}}$)\n\nThe input resistance seen by $I_{\\text{in}}$ is:\n$$R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = \\frac{\\frac{v_{\\text{out}}}{1 + g_{m1}r_{O1}}}{g_{m2} v_{\\text{out}}}$$\n\n$$\\boxed{R_{\\text{in}} \\approx \\frac{1}{g_{m1} g_{m2} r_{O1}}}$$\n\n* **Comparison:** In a standard Common-Gate stage without feedback, $R_{\\text{in}} \\approx \\frac{1}{g_{m1}}$. In this topology, the feedback loop reduces the input resistance by a factor of roughly $g_{m2} r_{O1}$, making it **extremely low**.\n\n---\n\n#### C. Output Resistance ($R_{\\text{out}}$)\n\nApplying a test voltage $v_t$ at $V_{\\text{out}}$:\n* $v_t$ modulates the gate of $M_2$, generating a small-signal current $i_{d2} \\approx g_{m2}v_t$.\n* This current flows through $M_1$ and returns to the test source.\n\n$$\\boxed{R_{\\text{out}} \\approx \\frac{1}{g_{m2}}}$$\n\n---\n\n### 4. DC Biasing Conditions\n\nFor proper operation, both transistors must remain in the **saturation region**:\n1. **$M_1$ Saturation:** \n   $$V_{\\text{out}} \\ge V_X + (V_{GS1} - V_{TH1}) = V_b - V_{TH1}$$\n2. **$M_2$ Saturation:**\n   $$V_X \\le V_{\\text{out}} + |V_{TH2}|$$\n3. **Quiescent Node Voltages:**\n   * $V_X = V_b - V_{GS1}$\n   * $V_{\\text{out}} = V_{DD} - V_{SG2}$, where $V_{SG2}$ is set by the bias current $I_{D2} = I_{\\text{bias}} - I_1$.\n\n---\n\n### 5. Summary of Key Advantages\n\n| Parameter | Value | Advantage / Significance |\n| :--- | :---: | :--- |\n| **Transimpedance Gain ($R_T$)** | $\\approx \\frac{1}{g_{m2}}$ | Well-controlled by device transconductance. |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\approx \\frac{1}{g_{m1}g_{m2}r_{O1}}$ | Extremely low, isolating input capacitance ($C_{\\text{in}}$) and pushing the input pole to high frequencies. |\n| **Bandwidth** | Very High | Ideal for high-speed photodetector front-ends. |",
        "format": "markdown",
        "sha256": "ecc95a3c7ca0f8c9fa9e99ae71d136916f0cc59c6996ce0c338f7e92b38e0018"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, describes feedback to the input node, and gives the low input resistance and approximately 1/gm2 transimpedance. Meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 7172,
        "total_tokens": 8260,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5415,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 7172,
        "total_tokens": 8260,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5415,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, the circuit does not fail to oscillate** as the capacitors $C_\\text{L}$ become arbitrarily large. It will continue to oscillate, but at a lower frequency.\n\n---\n\n### 1. Small-Signal (Frequency-Domain) Analysis\nEach inverter stage with a load capacitance $C_\\text{L}$ and output resistance $R_\\text{out}$ can be modeled as a single-pole amplifier with a transfer function:\n$$H(s) = -\\frac{A_0}{1 + s R_\\text{out} C_\\text{L}} = -\\frac{A_0}{1 + \\frac{s}{\\omega_0}}$$\nwhere:\n* $A_0$ is the low-frequency (DC) voltage gain of each inverter ($A_0 = g_\\text{m} R_\\text{out}$).\n* $\\omega_0 = \\frac{1}{R_\\text{out} C_\\text{L}}$ is the pole frequency.\n\nFor the three-stage loop, the total open-loop transfer function is:\n$$T(s) = [H(s)]^3 = -\\frac{A_0^3}{\\left(1 + \\frac{s}{\\omega_0}\\right)^3}$$\n\n#### Barkhausen Criteria:\n1. **Phase Condition:** For oscillation, the three stages must together contribute an additional $180^\\circ$ of phase shift, meaning each stage contributes $60^\\circ$:\n   $$\\tan^{-1}\\left(\\frac{\\omega_\\text{osc}}{\\omega_0}\\right) = 60^\\circ \\implies \\omega_\\text{osc} = \\sqrt{3}\\,\\omega_0 = \\frac{\\sqrt{3}}{R_\\text{out} C_\\text{L}}$$\n\n2. **Gain Condition:** The magnitude of the loop gain at the oscillation frequency $\\omega_\\text{osc}$ must be at least $1$:\n   $$|T(j\\omega_\\text{osc})| = \\frac{A_0^3}{\\left[\\sqrt{1 + (\\sqrt{3})^2}\\right]^3} = \\frac{A_0^3}{2^3} = \\frac{A_0^3}{8} \\ge 1 \\implies A_0 \\ge 2$$\n\nNotice that the **loop gain magnitude at $\\omega_\\text{osc}$ depends only on the DC gain $A_0$, and is completely independent of $C_\\text{L}$**. Therefore, if $A_0 \\ge 2$, the condition for oscillation is satisfied regardless of how large $C_\\text{L}$ becomes.\n\n---\n\n### 2. Large-Signal (Time-Domain) Analysis\n* An odd number of inverters (3) connected in a loop has **no stable DC state** (a high state at any node eventually propagates around the loop to invert itself).\n* The capacitors $C_\\text{L}$ simply determine the charging and discharging delay $\\tau \\propto R_\\text{on} C_\\text{L}$ of each stage.\n* The total period of oscillation is:\n  $$T_\\text{osc} = 2 \\times 3 \\times \\tau = 6\\tau \\propto C_\\text{L}$$\n* As $C_\\text{L} \\to \\infty$, the period $T_\\text{osc} \\to \\infty$ (frequency $f_\\text{osc} \\to 0$), but the switching mechanism remains active and the circuit still oscillates.",
        "format": "markdown",
        "sha256": "500509d61b189a52c0b3a3dd9d3b048dc654cdab994a50fa478dd9a3cfa580ce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors can become arbitrarily large while the ring continues oscillating at a lower frequency. Its small-signal phase and gain analysis shows the oscillation condition is independent of capacitance, which is sufficient for full credit.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 1984,
        "total_tokens": 3093,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1232,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 1984,
        "total_tokens": 3093,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1232,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the circuit does not fail to oscillate if the three load capacitors $C_L$ become arbitrarily large (assuming the inverters have sufficient DC gain, $A_0 \\ge 2$). Making the capacitors arbitrarily large only decreases the oscillation frequency toward zero, but does not prevent oscillation.\n\n---\n\n### 1. Small-Signal (Frequency-Domain) Analysis\n\nWe can model each inverter stage as an amplifier with a small-signal DC gain $A_0 = g_m R_{out}$, an output resistance $R_{out}$, and a load capacitance $C_L$.\n\n1. **Transfer Function of a Single Stage:**\n   $$H(s) = -\\frac{A_0}{1 + \\frac{s}{\\omega_0}}$$\n   where $\\omega_0 = \\frac{1}{R_{out} C_L}$ is the pole frequency.\n\n2. **Total Loop Gain:**\n   $$H_{\\text{loop}}(s) = - \\left( \\frac{A_0}{1 + \\frac{s}{\\omega_0}} \\right)^3$$\n\n3. **Phase Condition (Barkhausen Criterion):**\n   Oscillation occurs at the frequency $\\omega_{\\text{osc}}$ where the three poles contribute a total phase shift of $180^\\circ$ (each stage contributes $60^\\circ$):\n   $$3 \\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 180^\\circ \\implies \\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 60^\\circ$$\n   $$\\omega_{\\text{osc}} = \\sqrt{3}\\omega_0 = \\frac{\\sqrt{3}}{R_{out} C_L}$$\n\n4. **Magnitude Condition (Barkhausen Criterion):**\n   The loop gain magnitude at $\\omega_{\\text{osc}}$ is:\n   $$|H_{\\text{loop}}(j\\omega_{\\text{osc}})| = \\frac{A_0^3}{\\left[1 + (\\omega_{\\text{osc}}/\\omega_0)^2\\right]^{3/2}} = \\frac{A_0^3}{\\left(1 + 3\\right)^{3/2}} = \\frac{A_0^3}{8}$$\n\n   For the circuit to oscillate, the condition is:\n   $$|H_{\\text{loop}}(j\\omega_{\\text{osc}})| \\ge 1 \\implies A_0 \\ge 2$$\n\n**Conclusion:** The condition for oscillation depends **only on the DC gain $A_0$**, which is entirely independent of $C_L$. As $C_L \\to \\infty$, $\\omega_{\\text{osc}} \\to 0$, but the loop gain at $\\omega_{\\text{osc}}$ remains $\\frac{A_0^3}{8} \\ge 1$, so oscillation is sustained.\n\n---\n\n### 2. Large-Signal (Time-Domain) Perspective\n\n- A ring oscillator with an odd number of inverters (3 stages) has **no stable DC state** because each node continuously tries to invert the state of the subsequent node.\n- The propagation delay per stage is proportional to the capacitance:\n  $$t_d \\propto R_{out} C_L \\quad \\text{or} \\quad t_d \\approx \\frac{C_L \\cdot \\Delta V}{I_{\\text{charge}}}$$\n- The period of oscillation is:\n  $$T = 2 \\times 3 \\times t_d \\propto C_L$$\n\nAs $C_L \\to \\infty$, the period $T \\to \\infty$ (frequency $f_{\\text{osc}} \\to 0$), meaning the nodes simply charge and discharge more slowly, but the circuit will continue to oscillate.",
        "format": "markdown",
        "sha256": "d2f695d7db8856fb030c7747f3bcfc17b822abfba038be8e0aea82d941e57c5c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors slow the ring without stopping oscillation. The small-signal phase and gain conditions show the oscillation frequency scales as 1/CL while the required stage gain is independent of CL, satisfying the full-credit rule.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 3153,
        "total_tokens": 4262,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2329,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 3153,
        "total_tokens": 4262,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2329,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, the circuit does not fail to oscillate.** Making the load capacitors $C_{\\text{L}}$ arbitrarily large will simply decrease the oscillation frequency (increase the period), but oscillation will still occur.\n\nThis can be explained through both small-signal (frequency-domain) and large-signal (time-domain) analyses:\n\n---\n\n### 1. Small-Signal Analysis (Barkhausen Criteria)\nModel each inverter stage as an amplifier with a low-frequency gain $A_0$, an output resistance $R_{\\text{out}}$, and a load capacitance $C_{\\text{L}}$. The transfer function of a single stage is:\n$$H_1(s) = -\\frac{A_0}{1 + s R_{\\text{out}} C_{\\text{L}}} = -\\frac{A_0}{1 + \\frac{s}{\\omega_0}}$$\nwhere $\\omega_0 = \\frac{1}{R_{\\text{out}} C_{\\text{L}}}$.\n\nFor a 3-stage ring oscillator, the open-loop transfer function is:\n$$H(s) = \\left(-\\frac{A_0}{1 + s/\\omega_0}\\right)^3$$\n\nFor sustained oscillation, the Barkhausen criteria require:\n1. **Phase Condition:** The frequency-dependent phase shift across the loop must provide an additional $180^\\circ$ (each stage contributes $60^\\circ$):\n   $$\\tan^{-1}\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 60^\\circ \\implies \\omega_{\\text{osc}} = \\sqrt{3}\\,\\omega_0 = \\frac{\\sqrt{3}}{R_{\\text{out}} C_{\\text{L}}}$$\n\n2. **Gain Condition:** The magnitude of the loop gain at $\\omega_{\\text{osc}}$ must be at least 1:\n   $$|H(j\\omega_{\\text{osc}})| = \\left(\\frac{A_0}{\\sqrt{1 + (\\sqrt{3})^2}}\\right)^3 = \\left(\\frac{A_0}{2}\\right)^3 \\ge 1 \\implies A_0 \\ge 2$$\n\n**Conclusion:** \nThe condition for oscillation to start and sustain ($A_0 \\ge 2$) **does not depend on $C_{\\text{L}}$**. As $C_{\\text{L}} \\to \\infty$, the frequency $\\omega_{\\text{osc}} \\to 0$, but the loop gain condition remains satisfied.\n\n---\n\n### 2. Large-Signal (Time-Domain) Analysis\nFrom a switching perspective:\n* An odd number of inverters connected in a closed ring has no stable DC operating state (the DC bias point is unstable).\n* In each cycle, each inverter acts as a current source/sink that charges and discharges the capacitance $C_{\\text{L}}$ between the supply rails.\n* The propagation delay $t_{\\text{d}}$ of each stage is proportional to $C_{\\text{L}}$:\n  $$t_{\\text{d}} \\approx \\frac{C_{\\text{L}} \\Delta V}{I_{\\text{avg}}}$$\n* The total oscillation period for a 3-stage ring oscillator is:\n  $$T = 2 \\times 3 \\times t_{\\text{d}} = 6\\, t_{\\text{d}} \\propto C_{\\text{L}}$$\n\nAs $C_{\\text{L}}$ becomes arbitrarily large, the delay per stage increases accordingly, causing the period $T$ to become arbitrarily long (i.e., oscillation slows down), but the circuit continues to oscillate.",
        "format": "markdown",
        "sha256": "6d4fcdb0ac7276b20bc808aff3c79d59f9c883b01714b2db00e34276db4ba684"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the three-stage ring continues oscillating at a lower frequency. Its small-signal phase and gain conditions show that scaling all three node capacitances lowers the oscillation frequency without changing the required per-stage gain; the delay argument agrees.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 2603,
        "total_tokens": 3712,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1828,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 2603,
        "total_tokens": 3712,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1828,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the three load capacitors ($C_L$) in the 3-stage ring oscillator are **doubled** ($C_L \\rightarrow 2C_L$), the effects on the oscillator and its phase noise are as follows:\n\n---\n\n### 1. Effect on Oscillation Frequency\nThe oscillation frequency $f_0$ of an $N$-stage ring oscillator ($N=3$) is given by:\n$$f_0 = \\frac{1}{2N t_d}$$\n\nwhere the stage delay $t_d \\approx \\frac{C_L V_{DD}}{I_{avg}} \\propto C_L$. \n\n* **Result:** Doubling $C_L$ doubles the delay per stage ($t_d$), which **halves the oscillation frequency** ($f_0 \\rightarrow \\frac{f_0}{2}$).\n\n---\n\n### 2. Effect on Phase Noise (at a Fixed Frequency Offset $\\Delta \\omega$)\nUsing Hajimiri’s time-variant phase noise model for ring oscillators:\n$$\\mathcal{L}(\\Delta \\omega) = 10 \\log_{10} \\left( \\frac{\\Gamma_{\\text{rms}}^2}{2 q_{\\text{max}}^2 \\Delta \\omega^2} \\cdot \\frac{\\overline{i_n^2}}{\\Delta f} \\right)$$\n\nwhere:\n* **$q_{\\text{max}} = C_L V_{DD}$** is the maximum charge swung across the load node capacitance.\n* **$\\Gamma_{\\text{rms}}$** is the RMS impulse sensitivity function (ISF), which depends only on the normalized waveform shape and is invariant to $C_L$.\n* **$\\frac{\\overline{i_n^2}}{\\Delta f}$** is the noise current spectral density of the transistors, which remains unchanged.\n\nSince $q_{\\text{max}} \\propto C_L$:\n$$\\mathcal{L}(\\Delta \\omega) \\propto \\frac{1}{q_{\\text{max}}^2} \\propto \\frac{1}{C_L^2}$$\n\n* **Result:** Doubling $C_L$ quadruples $q_{\\text{max}}^2$, causing the phase noise power to **decrease by a factor of 4** (i.e., an **improvement of $6\\text{ dB}$** or **$-6\\text{ dBc/Hz}$**).\n\n---\n\n### 3. Summary of Key Metrics\n\n| Metric | Impact of Doubling $C_L$ ($2\\times C_L$) |\n| :--- | :--- |\n| **Oscillation Frequency ($f_0$)** | Halved ($\\times 1/2$) |\n| **Phase Noise at fixed $\\Delta \\omega$** | **Improves by $6\\text{ dB}$ (decreases by a factor of 4)** |\n| **Phase Noise at relative offset ($\\Delta \\omega / \\omega_0$)** | **Unchanged** |\n| **Cycle-to-cycle Jitter ($\\sigma_T$)** | Increases by $\\sqrt{2}$ ($\\approx +41\\%$) |\n| **Relative Jitter ($\\sigma_T / T_0$)** | Decreases by $\\sqrt{2}$ ($\\approx -29\\%$) |",
        "format": "markdown",
        "sha256": "99f0fbefbcdab2fde8f1863ecb5a43ac97039eedc0880bd0b122c6cb1fdf16c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by a factor of four (about 6 dB) at a fixed offset, with a charge-based justification. The relative-offset result is also correct.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 4114,
        "total_tokens": 5222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3411,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 4114,
        "total_tokens": 5222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3411,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the three load capacitors ($C_\\mathrm{L}$) in the 3-stage inverter-based ring oscillator are **doubled**, the **phase noise decreases by a factor of 4** (which corresponds to an **improvement of $6\\text{ dB}$**) at a given absolute offset frequency $\\Delta\\omega$.\n\n---\n\n### Step-by-Step Derivation\n\n#### 1. Effect on Oscillation Frequency ($\\omega_0$)\nThe propagation delay of each inverter stage is determined by charging/discharging the load capacitance $C_\\mathrm{L}$:\n$$t_\\mathrm{d} \\propto \\frac{C_\\mathrm{L} V_\\mathrm{DD}}{I_\\mathrm{avg}}$$\nBecause the total period is $T_0 = 2 N t_\\mathrm{d} = 6 t_\\mathrm{d}$ (for $N = 3$ stages), doubling $C_\\mathrm{L}$ doubles the oscillation period:\n$$T_0 \\to 2 T_0 \\implies \\omega_0 \\to \\frac{\\omega_0}{2}$$\n*(The oscillation frequency is halved.)*\n\n---\n\n#### 2. Effect on Jitter per Cycle ($\\sigma_T^2$)\nNoise affects the zero-crossing times (timing jitter) through two competing mechanisms:\n* **Node thermal noise voltage:** The total integrated noise variance at each capacitive node is:\n  $$\\overline{v_\\mathrm{n}^2} \\approx \\frac{kT}{C_\\mathrm{L}}$$\n  *(Doubling $C_\\mathrm{L}$ halves the voltage noise variance).*\n\n* **Slew rate ($SR$):** The slope of the transition is:\n  $$SR = \\frac{\\mathrm{d}V}{\\mathrm{d}t} \\propto \\frac{I_\\mathrm{avg}}{C_\\mathrm{L}}$$\n  *(Doubling $C_\\mathrm{L}$ halves the slew rate).*\n\nThe timing jitter variance per transition is:\n$$\\sigma_{\\Delta t}^2 = \\frac{\\overline{v_\\mathrm{n}^2}}{SR^2} \\propto \\frac{kT / C_\\mathrm{L}}{(I_\\mathrm{avg} / C_\\mathrm{L})^2} \\propto C_\\mathrm{L}$$\n\nThe total jitter variance accumulated per period over all transitions is:\n$$\\sigma_T^2 = 2N \\sigma_{\\Delta t}^2 \\propto C_\\mathrm{L}$$\n*(Doubling $C_\\mathrm{L}$ doubles the cycle jitter variance $\\sigma_T^2$).*\n\n---\n\n#### 3. Effect on Phase Noise ($\\mathcal{L}\\{\\Delta\\omega\\}$)\n\nThe phase noise at an offset frequency $\\Delta\\omega$ can be expressed in terms of cycle jitter as:\n$$\\mathcal{L}(\\Delta\\omega) = \\frac{1}{2}\\left(\\frac{\\omega_0}{\\Delta\\omega}\\right)^2 \\frac{\\sigma_T^2}{T_0}$$\n\n* Notice the ratio $\\frac{\\sigma_T^2}{T_0}$:\n  $$\\frac{\\sigma_T^2}{T_0} \\propto \\frac{C_\\mathrm{L}}{C_\\mathrm{L}} = \\text{constant}$$\n* Therefore, the phase noise depends directly on the oscillation frequency:\n  $$\\mathcal{L}(\\Delta\\omega) \\propto \\omega_0^2 \\propto \\left(\\frac{1}{C_\\mathrm{L}}\\right)^2$$\n\nAlternatively, using **Hajimiri's time-variant phase noise model**:\n$$\\mathcal{L}(\\Delta\\omega) = \\frac{\\Gamma_\\mathrm{rms}^2}{2 q_\\mathrm{max}^2} \\frac{\\overline{i_\\mathrm{n}^2}/\\Delta f}{\\Delta\\omega^2}$$\nSince the maximum node charge is $q_\\mathrm{max} = C_\\mathrm{L} V_\\mathrm{DD}$, doubling $C_\\mathrm{L}$ increases $q_\\mathrm{max}^2$ by a factor of 4, reducing $\\mathcal{L}(\\Delta\\omega)$ by a factor of 4.\n\n---\n\n### Conclusion\n\n* **At a fixed absolute frequency offset ($\\Delta\\omega$):** Phase noise **decreases by a factor of 4 (improves by $6\\text{ dB}$)**.\n* **At a fixed relative offset ($\\Delta\\omega/\\omega_0$):** Phase noise **remains unchanged**.",
        "format": "markdown",
        "sha256": "235f719b6922ccf4be94266e021e7c0bf396347d47a7b87b6749f4c10c972e10"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states a fourfold (6 dB) phase-noise decrease at fixed absolute offset and supports it by noting that doubling the capacitance halves the oscillation frequency. It also correctly notes the unchanged result at fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 5514,
        "total_tokens": 6622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4559,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 5514,
        "total_tokens": 6622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4559,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the three load capacitors ($C_L$) in the 3-stage CMOS ring oscillator are **doubled**, the phase noise at a fixed frequency offset **decreases by a factor of 4 (improves by $6\\text{ dB}$)**.\n\n---\n\n### Step-by-Step Derivation\n\n#### 1. Effect on Oscillation Frequency and Period\n* The stage delay is proportional to the load capacitance:\n  $$t_d \\propto \\frac{C_L \\cdot V_{DD}}{I}$$\n* The oscillation period is $T_0 = 2N t_d \\propto C_L$ (where $N = 3$).\n* Therefore, doubling $C_L$:\n  * **Doubles the period:** $T_0 \\to 2T_0$\n  * **Halves the oscillation frequency:** $\\omega_0 \\to \\frac{\\omega_0}{2}$\n\n---\n\n#### 2. Effect on Timing Jitter\n* During switching, thermal noise generates a voltage noise variance at each node:\n  $$\\overline{v_n^2} \\propto \\frac{kT}{C_L}$$\n* The slew rate during transition is:\n  $$\\text{SR} = \\frac{I}{C_L}$$\n* The timing jitter variance introduced per transition is:\n  $$\\sigma_{\\Delta t}^2 = \\frac{\\overline{v_n^2}}{\\text{SR}^2} \\propto \\frac{kT / C_L}{(I / C_L)^2} \\propto C_L$$\n* In a given observation time $t$, the number of transitions is proportional to the frequency $f_0 \\propto \\frac{1}{C_L}$. Thus, the accumulated time jitter variance $\\sigma_t^2(t)$ over time $t$ is:\n  $$\\sigma_t^2(t) \\propto \\left(\\frac{t}{T_0}\\right) \\sigma_{\\Delta t}^2 \\propto \\left(\\frac{1}{C_L}\\right) \\cdot C_L = \\text{constant}$$\n*(The absolute timing jitter accumulated per unit time is independent of $C_L$.)*\n\n---\n\n#### 3. Effect on Phase Noise\n* Phase fluctuation $\\Delta\\phi$ is related to time jitter $\\Delta t$ by:\n  $$\\Delta\\phi = \\omega_0 \\Delta t$$\n* Consequently, the phase variance is:\n  $$\\sigma_\\phi^2(t) = \\omega_0^2 \\cdot \\sigma_t^2(t) \\propto \\omega_0^2 \\propto \\frac{1}{C_L^2}$$\n* The phase noise spectrum $\\mathcal{L}(\\Delta\\omega)$ at a fixed offset frequency $\\Delta\\omega$ is given by:\n  $$\\mathcal{L}(\\Delta\\omega) \\propto \\frac{1}{\\Delta\\omega^2} \\frac{\\sigma_\\phi^2(t)}{t} \\propto \\frac{\\omega_0^2}{\\Delta\\omega^2} \\propto \\frac{1}{C_L^2}$$\n\n---\n\n### Conclusion\n\n* **At a fixed absolute frequency offset ($\\Delta\\omega$):**\n  $$\\mathcal{L}(\\Delta\\omega) \\to \\frac{1}{4} \\mathcal{L}(\\Delta\\omega) \\quad (-6\\text{ dB})$$\n  The phase noise **decreases by a factor of 4 (an improvement of $6\\text{ dB}$)**.\n\n* **At a fixed relative/fractional offset ($\\Delta\\omega / \\omega_0$):**\n  The phase noise remains **unchanged**.",
        "format": "markdown",
        "sha256": "9b61cbd8b79c785137baa558ffe3ae407946bd9932a15d0df6a28eafac7bf1c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about a factor of four (6 dB) at a fixed offset; it also correctly notes the unchanged result at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 4746,
        "total_tokens": 5854,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 4746,
        "total_tokens": 5854,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit will fail to oscillate if $C_L$ becomes arbitrarily large.**\n\nHere is the detailed explanation from both small-signal (Barkhausen criteria) and control-theory (dominant-pole compensation) perspectives:\n\n---\n\n### 1. Small-Signal / Barkhausen Stability Analysis\n\nA 3-stage ring oscillator operates by providing a total of $360^\\circ$ phase shift around the loop at a frequency $\\omega_{osc}$ with a loop gain magnitude $|T(j\\omega_{osc})| \\ge 1$. \n\nSince three inverters provide an intrinsic DC phase shift of $180^\\circ$ (from their negative gains $-A_0$), the frequency-dependent phase shift contributed by the three poles must equal $180^\\circ$:\n\n1. Let the output resistance of each inverter be $R_0$, and the small-signal gain be $-A_0$.\n2. The loaded stage has a pole at $\\omega_{p1} = \\frac{1}{R_0 C_L}$.\n3. The other two stages have poles determined by their internal parasitic capacitances $C_0$, so $\\omega_{p2} = \\omega_{p3} = \\omega_0 = \\frac{1}{R_0 C_0}$.\n\nThe loop gain is:\n$$T(s) = \\frac{A_0^3}{\\left(1 + \\frac{s}{\\omega_{p1}}\\right)\\left(1 + \\frac{s}{\\omega_0}\\right)^2}$$\n\n#### Phase Condition:\n$$\\angle T(j\\omega) = -\\arctan\\left(\\frac{\\omega}{\\omega_{p1}}\\right) - 2\\arctan\\left(\\frac{\\omega}{\\omega_0}\\right) = -180^\\circ$$\n\nAs $C_L \\to \\infty$, the pole $\\omega_{p1} \\to 0$. For any non-zero frequency $\\omega$:\n$$\\arctan\\left(\\frac{\\omega}{\\omega_{p1}}\\right) \\to 90^\\circ$$\n\nTherefore, the remaining two stages must provide the remaining $90^\\circ$ of phase shift:\n$$2\\arctan\\left(\\frac{\\omega}{\\omega_0}\\right) = 90^\\circ \\implies \\arctan\\left(\\frac{\\omega}{\\omega_0}\\right) = 45^\\circ \\implies \\omega_{osc} = \\omega_0$$\n\n#### Magnitude Condition:\nEvaluating the loop gain magnitude at $\\omega_{osc} = \\omega_0$:\n$$|T(j\\omega_{osc})| = \\frac{A_0^3}{\\sqrt{1 + \\left(\\frac{\\omega_0}{\\omega_{p1}}\\right)^2} \\cdot \\left[1 + \\left(\\frac{\\omega_0}{\\omega_0}\\right)^2\\right]} \\approx \\frac{A_0^3}{2 \\left(\\frac{\\omega_0}{\\omega_{p1}}\\right)} = \\frac{A_0^3 \\, \\omega_{p1}}{2\\omega_0}$$\n\nSince $\\omega_{p1} \\propto \\frac{1}{C_L}$, as $C_L \\to \\infty$:\n$$|T(j\\omega_{osc})| \\to 0 < 1$$\n\nBecause the loop gain drops well below unity at the frequency where the phase condition is met, **Barkhausen's gain criterion is violated**, and oscillations cannot start or be sustained.\n\n---\n\n### 2. Control Theory Perspective (Dominant-Pole Compensation)\n\nMaking $C_L$ arbitrarily large is equivalent to applying **dominant-pole compensation** to the negative feedback loop:\n- The dominant pole $\\omega_{p1}$ causes the loop gain to roll off at $-20\\text{ dB/decade}$ starting at a very low frequency.\n- The unity-gain frequency ($\\omega_{u}$) drops well below the non-dominant poles $\\omega_0$.\n- At the unity-gain frequency, only the dominant pole contributes phase shift ($\\approx -90^\\circ$), while the other two stages contribute virtually $0^\\circ$.\n\nThis results in a **phase margin of $\\approx 90^\\circ$**, making the circuit an unconditionally stable negative feedback system. Instead of oscillating, the nodes will simply settle to their DC operating point (the inverter threshold voltage, $V_M \\approx V_{DD}/2$).",
        "format": "markdown",
        "sha256": "ab09b7c7786387c991904eb0e0823060475ce1be696108212af401138ba45794"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading on one node creates a dominant pole and drives loop gain below unity at the phase condition, preventing oscillation. The simplified pole model and stability interpretation are consistent with the essential result.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 4870,
        "total_tokens": 5977,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3916,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 4870,
        "total_tokens": 5977,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3916,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit will fail to oscillate if $C_L$ becomes arbitrarily large.**\n\n---\n\n### **Detailed Analysis**\n\nWe can understand why the circuit fails to oscillate using both the **Barkhausen criteria** (frequency-domain loop-gain analysis) and **closed-loop stability analysis**.\n\n---\n\n### 1. Loop Gain Formulation\nAssume each inverter has a small-signal DC gain of $-A_0$ and an internal output resistance $R_{out}$. \n- The two unloaded inverters each have an intrinsic output pole at:\n  $$\\omega_0 = \\frac{1}{R_{out} C_{int}}$$\n- The loaded inverter has a dominant pole determined by the load capacitance $C_L$:\n  $$\\omega_L = \\frac{1}{R_{out} C_L}$$\n\nThe total open-loop transfer function (loop gain) is:\n$$T(s) = \\frac{-A_0^3}{\\left(1 + \\frac{s}{\\omega_L}\\right)\\left(1 + \\frac{s}{\\omega_0}\\right)^2}$$\n\n---\n\n### 2. Phase Condition (Barkhausen Criterion)\nFor the circuit to oscillate, the frequency-dependent phase shift introduced by the poles must contribute an additional $-180^\\circ$ (so that together with the negative DC feedback, the total phase around the loop is $-360^\\circ$ or $0^\\circ$):\n\n$$\\angle T(j\\omega) = -180^\\circ - \\left[ \\arctan\\left(\\frac{\\omega}{\\omega_L}\\right) + 2\\arctan\\left(\\frac{\\omega}{\\omega_0}\\right) \\right] = -360^\\circ$$\n\n$$\\implies \\arctan\\left(\\frac{\\omega_{osc}}{\\omega_L}\\right) + 2\\arctan\\left(\\frac{\\omega_{osc}}{\\omega_0}\\right) = 180^\\circ$$\n\nAs $C_L \\to \\infty$, the dominant pole moves to the origin ($\\omega_L \\to 0$). For any finite frequency $\\omega > 0$:\n$$\\arctan\\left(\\frac{\\omega}{\\omega_L}\\right) \\to 90^\\circ$$\n\nThe remaining two stages must therefore provide the remaining $90^\\circ$ of phase shift ($45^\\circ$ each):\n$$2\\arctan\\left(\\frac{\\omega_{osc}}{\\omega_0}\\right) = 90^\\circ \\implies \\arctan\\left(\\frac{\\omega_{osc}}{\\omega_0}\\right) = 45^\\circ \\implies \\omega_{osc} \\approx \\omega_0$$\n\n---\n\n### 3. Magnitude Condition (Barkhausen Criterion)\nNow, evaluate the magnitude of the loop gain at this potential oscillation frequency $\\omega_{osc} \\approx \\omega_0$:\n\n$$|T(j\\omega_{osc})| = \\frac{A_0^3}{\\sqrt{1 + \\left(\\frac{\\omega_0}{\\omega_L}\\right)^2} \\cdot \\left(\\sqrt{1 + \\left(\\frac{\\omega_0}{\\omega_0}\\right)^2}\\right)^2} \\approx \\frac{A_0^3}{\\left(\\frac{\\omega_0}{\\omega_L}\\right) \\cdot 2} = \\frac{A_0^3 \\cdot \\omega_L}{2\\omega_0}$$\n\nSince $\\omega_L = \\frac{1}{R_{out} C_L} \\propto \\frac{1}{C_L}$:\n$$\\lim_{C_L \\to \\infty} |T(j\\omega_{osc})| = 0$$\n\nFor a sufficiently large $C_L$, the loop gain magnitude drops well below unity ($|T(j\\omega_{osc})| < 1$). \n\n---\n\n### **Conclusion**\nBecause the loop gain at the required $-180^\\circ$ phase crossover frequency is less than $1$:\n- Barkhausen's criterion for oscillation is violated.\n- The single DC equilibrium point (where all inverter inputs/outputs sit at their switching threshold $V_M \\approx V_{DD}/2$) becomes **asymptotically stable**.\n- Instead of oscillating, the circuit will settle and latch at this DC operating point.",
        "format": "markdown",
        "sha256": "cf23b46c7772f42829e46d3cc2b1ed395d291a19ec2f396323eb584c640959e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading on one node can stop oscillation and explains the dominant-pole effect: at the phase-crossover frequency, loop gain falls below unity, violating Barkhausen. The approximate pole and phase calculations support the essential answer; the DC-settling detail is consistent with the golden solution.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 3587,
        "total_tokens": 4694,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2657,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 3587,
        "total_tokens": 4694,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2657,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit will fail to oscillate if $C_L$ becomes arbitrarily large.**\n\n---\n\n### **Explanation**\n\nA three-stage ring oscillator relies on sufficient loop gain at the frequency where the total phase shift around the loop is $180^\\circ$ (the Barkhausen criterion for oscillation). When $C_L$ becomes arbitrarily large, it acts as **dominant-pole compensation**, stabilizing the circuit into a non-oscillating DC state.\n\n---\n\n### **1. Frequency-Domain / Small-Signal Analysis**\n\nLet each inverter be modeled with a DC gain of $-A_0$ ($A_0 > 1$) and an output resistance $R_{out}$.\n\n* **Without a large $C_L$:** All three poles are at high, comparable frequencies ($\\omega_{p1} \\approx \\omega_{p2} \\approx \\omega_{p3} = \\omega_0$). At the frequency where each pole contributes $60^\\circ$ of phase shift ($\\text{total phase shift} = 180^\\circ$), the loop gain magnitude is:\n  $$|H(j\\omega_{osc})| = \\frac{A_0^3}{\\left(\\sqrt{1 + \\tan^2 60^\\circ}\\right)^3} = \\frac{A_0^3}{8}$$\n  If $A_0 > 2$, the loop gain exceeds unity, and oscillations start and build up.\n\n* **With an arbitrarily large $C_L$:** \n  The pole at the output of the first inverter moves extremely close to the origin:\n  $$\\omega_{p1} = \\frac{1}{R_{out1} C_L} \\to 0$$\n  \n  This creates a **dominant pole**, which contributes nearly $90^\\circ$ of phase lag even at very low frequencies. To get the remaining $90^\\circ$ needed for a total phase shift of $180^\\circ$, the required frequency $\\omega_{osc}$ must be set by the other two high-frequency poles ($\\omega_{p2}, \\omega_{p3}$):\n  $$\\arctan\\left(\\frac{\\omega_{osc}}{\\omega_{p2}}\\right) + \\arctan\\left(\\frac{\\omega_{osc}}{\\omega_{p3}}\\right) = 90^\\circ \\implies \\omega_{osc} \\approx \\omega_0$$\n\n  At this frequency $\\omega_{osc}$, the dominant pole severely attenuates the signal:\n  $$|H(j\\omega_{osc})| \\approx \\frac{A_0^3}{\\left(\\frac{\\omega_{osc}}{\\omega_{p1}}\\right) \\cdot \\sqrt{2} \\cdot \\sqrt{2}} \\propto \\frac{1}{C_L} \\to 0$$\n\n  Since $|H(j\\omega_{osc})| \\ll 1$, the **Barkhausen criterion is violated**, and the circuit cannot sustain oscillations.\n\n---\n\n### **2. Feedback & Stability Perspective**\n\nAn odd number of inverters (3 stages) inherently provides **negative feedback at DC**. \n\nBy placing an arbitrarily large capacitance $C_L$ at one node:\n* The circuit behaves exactly like a **dominant-pole compensated operational amplifier** configured in unity-gain negative feedback.\n* The phase margin approaches $90^\\circ$, making the closed-loop system **asymptotically stable**.\n* The unique DC equilibrium point (where all inverters sit at their switching threshold, $V_{in} = V_{out} = V_M$) becomes stable. Any small electrical noise or perturbation decays exponentially instead of growing, leaving the circuit stuck at a constant DC voltage.",
        "format": "markdown",
        "sha256": "d0ab4089f145d3ea0b12b5f4cc6326bfacd138716278d8811b02b532e21cbe99"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading on one node creates a very low dominant pole, reducing loop gain at the phase-crossover frequency until oscillation cannot be sustained. The frequency-domain argument supports the essential result; the op-amp analogy and low-frequency wording are minor imprecisions that do not contradict it.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 3565,
        "total_tokens": 4672,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 3565,
        "total_tokens": 4672,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the widths ($W$) of both the NMOS and PMOS devices in the CMOS ring oscillator are doubled (assuming parasitic capacitances dominate and there is no fixed external load), **the phase noise decreases by a factor of 2 (or drops by $3\\text{ dB}$)**.\n\n---\n\n### **Detailed Derivation & Explanation**\n\n#### 1. **Oscillation Frequency ($f_0$)**\n* **Node Capacitance:** The capacitance at each node is dominated by the gate, drain, and interconnect parasitics, which are directly proportional to the transistor width:\n  $$C_L \\propto W$$\n* **Drive Current:** The saturation current (charging/discharging current) is also directly proportional to the width:\n  $$I_D \\propto W$$\n* **Stage Delay:** The delay per stage is:\n  $$t_d \\approx \\frac{C_L \\Delta V}{I_D} \\propto \\frac{W}{W} = \\text{constant}$$\n* Therefore, the oscillation frequency $f_0 = \\frac{1}{2 N t_d}$ **remains unchanged**.\n\n---\n\n#### 2. **Phase Noise Scaling (Hajimiri's Model)**\nThe phase noise of an oscillator at an offset frequency $\\Delta\\omega$ can be expressed as:\n$$\\mathcal{L}(\\Delta\\omega) = \\frac{\\Gamma_{\\text{rms}}^2}{4 q_{\\max}^2 \\Delta\\omega^2} \\left(\\frac{\\overline{i_n^2}}{\\Delta f}\\right)$$\n\nWhere:\n* **Thermal Noise Current:** The device noise spectral density is proportional to transconductance $g_m$:\n  $$\\frac{\\overline{i_n^2}}{\\Delta f} = 4kT\\gamma g_m \\propto W \\quad (\\text{increases by } 2\\times)$$\n* **Maximum Charge Swing ($q_{\\max}$):** The maximum charge stored across the node capacitance is:\n  $$q_{\\max} = C_L V_{\\text{swing}} \\propto W \\implies q_{\\max}^2 \\propto W^2 \\quad (\\text{increases by } 4\\times)$$\n* **Impulse Sensitivity Function ($\\Gamma_{\\text{rms}}$):** Since the shape and normalized timing of the waveform are unchanged, $\\Gamma_{\\text{rms}}$ is constant.\n\nSubstituting these into the phase noise equation:\n$$\\mathcal{L}(\\Delta\\omega) \\propto \\frac{W}{W^2} = \\frac{1}{W}$$\n\n---\n\n### **Conclusion**\n* **Phase Noise:** Halves ($\\mathcal{L}_{\\text{new}} = \\frac{1}{2}\\mathcal{L}_{\\text{old}}$, a **$3\\text{ dB}$ improvement**).\n* **Trade-off:** The power dissipation doubles ($P \\propto W$).",
        "format": "markdown",
        "sha256": "c0e797ded00e9b03c3a0668bca6740b5dd360ea9bd603b49e608522e1179dd9d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that phase noise falls by a factor of two (about 3 dB). Its scaling argument is consistent: noise current power doubles while charge swing doubles, yielding a fourfold signal-charge-squared increase; it also correctly notes the frequency is roughly unchanged and power doubles.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2636,
        "total_tokens": 3752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2022,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2636,
        "total_tokens": 3752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2022,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the widths ($W$) of all NMOS and PMOS transistors in the inverter-based ring oscillator are doubled ($W \\to 2W$), the **phase noise decreases by a factor of 2 (improves by $3\\text{ dB}$)**, assuming the circuit is self-loaded (dominated by intrinsic device capacitances).\n\n---\n\n### **Detailed Derivation and Explanation**\n\n#### 1. **Oscillation Frequency ($\\omega_0$)**\n* The total node capacitance is dominated by the gate and drain parasitic capacitances of the transistors: \n  $$C_L \\propto W \\implies C_L \\to 2C_L$$\n* The charging and discharging currents are proportional to width:\n  $$I_D \\propto W \\implies I_D \\to 2I_D$$\n* The stage delay is:\n  $$t_d \\approx \\frac{C_L V_{DD}}{I_D} \\propto \\frac{2C_L}{2I_D} = \\text{constant}$$\n* Therefore, the oscillation frequency $f_0 = \\frac{1}{2 N t_d}$ **remains unchanged**.\n\n---\n\n#### 2. **Transistor Noise Current ($\\overline{i_n^2}/\\Delta f$)**\n* The transconductance of each device doubles: $g_m \\propto W \\implies g_m \\to 2g_m$.\n* The thermal noise current power spectral density is given by:\n  $$\\frac{\\overline{i_n^2}}{\\Delta f} = 4kT\\gamma g_m$$\n* Consequently, the noise power generated by the transistors **increases by a factor of 2** ($+3\\text{ dB}$).\n\n---\n\n#### 3. **Maximum Charge Swing ($q_{\\max}$)**\n* The maximum signal charge stored at each node is:\n  $$q_{\\max} = C_L V_{DD} \\implies q_{\\max} \\to 2q_{\\max}$$\n\n---\n\n#### 4. **Overall Phase Noise ($\\mathcal{L}(\\Delta\\omega)$)**\nAccording to the general theory of phase noise in electrical oscillators (Hajimiri's model):\n$$\\mathcal{L}(\\Delta\\omega) = \\frac{\\Gamma_{\\text{rms}}^2}{2 q_{\\max}^2 \\Delta\\omega^2} \\cdot \\frac{\\overline{i_n^2}}{\\Delta f}$$\n\n* The normalized impulse sensitivity function (ISF) $\\Gamma(t)$ is dimensionless and retains the same waveform shape.\n* Substituting the scaled parameters:\n  $$\\mathcal{L}_{\\text{new}}(\\Delta\\omega) \\propto \\frac{2 \\cdot (\\overline{i_n^2}/\\Delta f)}{(2 q_{\\max})^2} = \\frac{1}{2} \\mathcal{L}_{\\text{old}}(\\Delta\\omega)$$\n\n---\n\n### **Conclusion**\n* **Phase Noise:** **Halves** (decreases by **$3\\text{ dB}$** / improves by $3\\text{ dB}$).\n* **Trade-off:** The power consumption doubles ($P \\to 2P$), consistent with the fundamental oscillator trade-off $\\mathcal{L}(\\Delta\\omega) \\propto \\frac{1}{P}$.",
        "format": "markdown",
        "sha256": "144162111ae66674ddb6f4de949e67854e280ceb20648d19202f9596c366ac5e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that phase noise falls by a factor of two (about 3 dB), with a sound scaling argument: device noise current power doubles while signal charge doubles, yielding half the noise-to-signal ratio. The frequency and power tradeoff are also correctly identified.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3046,
        "total_tokens": 4162,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2342,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3046,
        "total_tokens": 4162,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2342,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If the widths of all NMOS and PMOS devices are doubled (assuming device intrinsic capacitances dominate over interconnect wiring parasitics), the **phase noise decreases by a factor of 2 (improves by 3 dB)**, at the expense of doubling the power consumption.\n\n---\n\n### **Detailed Explanation**\n\n#### 1. **Oscillation Frequency Remains Constant**\n* **Load Capacitance:** The total capacitance at each node is dominated by the gate and drain capacitances, which scale proportionally with the transistor width:\n  $$C_L \\propto W$$\n* **Current Drive / On-Resistance:** The transistor drive current doubles (and channel on-resistance halves):\n  $$I_D \\propto W \\quad \\text{and} \\quad R_{\\text{on}} \\propto \\frac{1}{W}$$\n* **Stage Delay & Frequency:** The delay per inverter stage is given by:\n  $$\\tau \\approx R_{\\text{on}} C_L \\propto \\left(\\frac{1}{W}\\right)(W) = \\text{constant}$$\n  Therefore, the oscillation frequency $\\omega_0 = \\frac{1}{2N\\tau}$ remains **unchanged**.\n\n---\n\n#### 2. **Phase Noise Analysis**\nUsing the time-variant phase noise model (Hajimiri's model):\n$$\\mathcal{L}(\\Delta\\omega) = 10 \\log_{10} \\left( \\frac{\\Gamma_{\\text{rms}}^2}{2 \\, q_{\\text{max}}^2 \\, \\Delta\\omega^2} \\cdot \\frac{\\overline{i_n^2}}{\\Delta f} \\right)$$\n\n* **Device Noise Current:** The thermal noise power spectral density of the transistors is proportional to transconductance $g_m$:\n  $$\\frac{\\overline{i_n^2}}{\\Delta f} = 4kT\\gamma g_m \\propto W$$\n* **Maximum Charge Swing:** The maximum charge stored at each node scales with capacitance:\n  $$q_{\\text{max}} = C_L V_{DD} \\propto W \\implies q_{\\text{max}}^2 \\propto W^2$$\n* **Overall Phase Noise Power:**\n  $$\\mathcal{L}(\\Delta\\omega) \\propto \\frac{\\overline{i_n^2}/\\Delta f}{q_{\\text{max}}^2} \\propto \\frac{W}{W^2} = \\frac{1}{W}$$\n\nSince $W \\to 2W$:\n$$\\mathcal{L}_{\\text{new}}(\\Delta\\omega) = \\frac{1}{2} \\mathcal{L}_{\\text{old}}(\\Delta\\omega) \\implies -3\\text{ dB}$$\n\n---\n\n### **Intuitive (Paralleling) Perspective**\nDoubling the width of every transistor is equivalent to connecting **two identical ring oscillators in parallel**:\n* The output voltage swing remains identical.\n* The uncorrelated noise power of the two circuits adds ($2\\times$), but the total energy storage capability ($q_{\\text{max}}^2$) increases by a factor of $4\\times$.\n* As a result, the Signal-to-Noise Ratio (SNR) improves by a factor of 2, leading to a **3 dB reduction** in phase noise.",
        "format": "markdown",
        "sha256": "38684a0b329c197b8591b0f51fcfb4d2cacc06d98269a0f4c1d0248c808c9a99"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and supports it with valid width scaling: noise current PSD doubles while charge swing doubles, with frequency roughly unchanged. It also correctly notes the doubled power cost.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2601,
        "total_tokens": 3717,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1905,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2601,
        "total_tokens": 3717,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1905,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ looking into the supply node of the three-stage CMOS ring oscillator, we analyze the small-signal equivalent circuit under symmetric excitation.\n\n---\n\n### **1. Circuit Representation and Small-Signal Model**\n\nEach CMOS inverter stage $j$ (where $j \\in \\{1, 2, 3\\}$) consists of:\n* A PMOS transistor $M_{Pj}$ with its source connected to the supply node ($v_x$).\n* An NMOS transistor $M_{Nj}$ with its source connected to ground.\n* The gate of stage $j$ is connected to the output of stage $j-1$ ($v_{in,j} = v_{j-1}$), and the drain of stage $j$ is connected to node $v_j$ ($v_{out,j} = v_j$).\n\nApplying a small-signal test voltage $v_x$ at the common supply node:\n* The small-signal current flowing from the supply through $M_{Pj}$ is:\n  $$i_{P,j} = g_{mP}(v_x - v_{in,j}) + g_{dsP}(v_x - v_{out,j})$$\n  where $g_{dsP} = 1/r_{oP}$.\n\n* The small-signal current flowing to ground through $M_{Nj}$ is:\n  $$i_{N,j} = g_{mN}v_{in,j} + g_{dsN}v_{out,j}$$\n  where $g_{dsN} = 1/r_{oN}$.\n\n---\n\n### **2. Node Voltage Analysis via Symmetry**\n\nBy applying Kirchhoff's Current Law (KCL) at each output node $v_{out,j}$:\n$$i_{P,j} = i_{N,j}$$\n$$g_{mP}(v_x - v_{in,j}) + g_{dsP}(v_x - v_{out,j}) = g_{mN}v_{in,j} + g_{dsN}v_{out,j}$$\n\nRearranging gives:\n$$(g_{mP} + g_{dsP})v_x = (g_{mN} + g_{mP})v_{in,j} + (g_{dsN} + g_{dsP})v_{out,j}$$\n\nBecause the three stages are identical and the test voltage $v_x$ is applied uniformly to all stages, the system responds with complete symmetry:\n$$v_1 = v_2 = v_3 = v_o \\quad \\implies \\quad v_{in,j} = v_{out,j} = v_o$$\n\nSubstituting $v_{in,j} = v_{out,j} = v_o$:\n$$(g_{mP} + g_{dsP})v_x = (g_{mN} + g_{mP} + g_{dsN} + g_{dsP})v_o$$\n\n$$\\implies v_o = \\frac{g_{mP} + g_{dsP}}{(g_{mN} + g_{dsN}) + (g_{mP} + g_{dsP})} v_x$$\n\n---\n\n### **3. Equivalent Resistance per Stage**\n\nSince $v_{in,j} = v_{out,j} = v_o$, each inverter has its input effectively tied to its output for common-mode supply variations. Consequently:\n* **PMOS ($M_P$):** acts as a diode-connected transistor between $v_x$ and $v_o$ with resistance:\n  $$r_P = \\frac{1}{g_{mP} + g_{dsP}} = \\frac{1}{g_{mP}} \\parallel r_{oP}$$\n\n* **NMOS ($M_N$):** acts as a diode-connected transistor between $v_o$ and ground with resistance:\n  $$r_N = \\frac{1}{g_{mN} + g_{dsN}} = \\frac{1}{g_{mN}} \\parallel r_{oN}$$\n\nThus, each inverter stage presents a series combination of $r_P$ and $r_N$ from the supply node to ground:\n$$R_{\\text{stage}} = r_P + r_N = \\left(\\frac{1}{g_{mP}} \\parallel r_{oP}\\right) + \\left(\\frac{1}{g_{mN}} \\parallel r_{oN}\\right) = \\frac{1}{g_{mP} + g_{dsP}} + \\frac{1}{g_{mN} + g_{dsN}}$$\n\n---\n\n### **4. Total Small-Signal Resistance $R_X$**\n\nSince the ring oscillator consists of $3$ identical stages connected in parallel to the supply node:\n\n$$R_X = \\frac{1}{3} R_{\\text{stage}} = \\frac{1}{3} \\left( \\frac{1}{g_{mP} + g_{dsP}} + \\frac{1}{g_{mN} + g_{dsN}} \\right)$$\n\nor equivalently:\n$$R_X = \\frac{1}{3} \\left[ \\left(\\frac{1}{g_{mP}} \\parallel r_{oP}\\right) + \\left(\\frac{1}{g_{mN}} \\parallel r_{oN}\\right) \\right]$$\n\n---\n\n### **Special Case (Neglecting Channel-Length Modulation, $r_o \\to \\infty$):**\n$$R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mP}} + \\frac{1}{g_{mN}}\\right) = \\frac{g_{mN} + g_{mP}}{3 g_{mN} g_{mP}}$$",
        "format": "markdown",
        "sha256": "0bcaf45359d661521fecd2485afae764736a4cf4f06ec64db0a38adf9e8f4220"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance from a diode-connected symmetry model, but misses the dominant oscillation-driven charging and discharging of the load capacitances.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 5880,
        "total_tokens": 6992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 5880,
        "total_tokens": 6992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ looking into the supply node of the 3-stage CMOS ring oscillator, we analyze the circuit around its symmetric operating point (equilibrium state).\n\n---\n\n### 1. DC Operating Point and Symmetry\n\nIn an identical 3-stage ring oscillator at its equilibrium point:\n- The DC voltages at all nodes are equal to the inverter trip point: \n  $$V_1 = V_2 = V_3 = V_M$$\n- Both the NMOS and PMOS transistors in all three inverters operate in the **saturation region** because:\n  - For NMOS: $V_{DS} = V_{GS} = V_M > V_M - V_{TH,N}$\n  - For PMOS: $V_{SD} = V_{SG} = V_{DD} - V_M > (V_{DD} - V_M) - |V_{TH,P}|$\n\n---\n\n### 2. Small-Signal Analysis\n\nLet a small-signal test voltage $v_x$ be applied to the supply node, and let $v_1, v_2, v_3$ be the small-signal voltages at the outputs of stages 1, 2, and 3, respectively.\n\nDue to the circuit's structural symmetry, applying a common-mode perturbation $v_x$ at the supply produces identical small-signal voltages at all three nodes:\n$$v_1 = v_2 = v_3 = v$$\n\nFor any given inverter stage:\n- **PMOS Transistor:**\n  - Source is at $v_x$\n  - Gate and drain are both at $v$ (since $v_{in} = v_{out} = v$)\n  - Small-signal source-to-gate voltage: $v_{sg,p} = v_x - v$\n  - Small-signal source-to-drain voltage: $v_{sd,p} = v_x - v$\n\n  Thus, the PMOS acts as a **diode-connected device** connected between node $v_x$ and node $v$, with an equivalent resistance:\n  $$R_P = \\frac{1}{g_{mp}} \\parallel r_{op} = \\frac{1}{g_{mp} + \\frac{1}{r_{op}}}$$\n\n- **NMOS Transistor:**\n  - Source is at ground ($0$)\n  - Gate and drain are both at $v$\n  - Small-signal gate-to-source voltage: $v_{gs,n} = v$\n  - Small-signal drain-to-source voltage: $v_{ds,n} = v$\n\n  Thus, the NMOS acts as a **diode-connected device** connected between node $v$ and ground, with an equivalent resistance:\n  $$R_N = \\frac{1}{g_{mn}} \\parallel r_{on} = \\frac{1}{g_{mn} + \\frac{1}{r_{on}}}$$\n\n---\n\n### 3. Equivalent Resistance of a Single Stage\n\nBecause the small-signal current from the supply node flows through the PMOS to node $v$, and then entirely through the NMOS to ground, the resistance of one inverter stage is the series combination of $R_P$ and $R_N$:\n\n$$R_{\\text{stage}} = R_P + R_N = \\left(\\frac{1}{g_{mp}} \\parallel r_{op}\\right) + \\left(\\frac{1}{g_{mn}} \\parallel r_{on}\\right)$$\n\n---\n\n### 4. Total Resistance Looking into the Supply ($R_X$)\n\nAll 3 inverter stages are connected in parallel across the supply node and ground:\n\n$$R_X = \\frac{1}{3} R_{\\text{stage}} = \\frac{1}{3} \\left[ \\left(\\frac{1}{g_{mp}} \\parallel r_{op}\\right) + \\left(\\frac{1}{g_{mn}} \\parallel r_{on}\\right) \\right]$$\n\n---\n\n### Final Result\n\n- **With channel-length modulation ($r_o < \\infty$):**\n  $$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mp} + \\frac{1}{r_{op}}} + \\frac{1}{g_{mn} + \\frac{1}{r_{on}}} \\right)$$\n\n- **Neglecting channel-length modulation ($r_{op}, r_{on} \\to \\infty$):**\n  $$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mp}} + \\frac{1}{g_{mn}} \\right)$$",
        "format": "markdown",
        "sha256": "c7972a06d0c5f469173b041eefea7bfec30eed3013db0bc33a67195a379e6264"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The derivation is internally consistent for a static symmetric operating point, but it ignores the oscillator’s charging and discharging of the load capacitances—the dominant mechanism setting the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 5912,
        "total_tokens": 7024,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 5912,
        "total_tokens": 7024,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ looking into the supply node of the three-stage CMOS ring oscillator, we analyze the circuit around its symmetric operating point.\n\n---\n\n### **1. Symmetry Analysis**\n\nEach inverter stage consists of a PMOS transistor ($M_P$) and an NMOS transistor ($M_N$):\n- The sources of all PMOS transistors are connected to the supply node $V_{DD}$.\n- The sources of all NMOS transistors are connected to ground.\n- The output of each stage is connected to the input (gates) of the subsequent stage.\n\nWhen a small-signal test voltage $v_x$ is applied to the common supply node:\nDue to the complete rotational symmetry of the three-stage ring oscillator, the small-signal voltages at all three output nodes must be identical:\n$$v_1 = v_2 = v_3 = v$$\n\n---\n\n### **2. Equivalent Impedance of a Single Inverter Stage**\n\nFor each inverter stage $k$:\n- **Input voltage:** $v_{\\text{in}} = v_{k-1} = v$\n- **Output voltage:** $v_{\\text{out}} = v_k = v$\n\nSince the gate voltage equals the drain voltage ($v_{\\text{in}} = v_{\\text{out}} = v$):\n\n1. **PMOS Transistor ($M_P$):**\n   - Source is at $v_x$, Gate is at $v$, Drain is at $v$.\n   - Because $v_g = v_d$, the PMOS acts as a **diode-connected device** connected between the supply node ($v_x$) and the internal node ($v$).\n   - Its small-signal resistance is:\n     $$R_P = \\frac{1}{g_{mp}} \\parallel r_{op} = \\frac{1}{g_{mp} + g_{op}}$$\n\n2. **NMOS Transistor ($M_N$):**\n   - Source is at ground ($0$), Gate is at $v$, Drain is at $v$.\n   - Because $v_g = v_d$, the NMOS also acts as a **diode-connected device** connected between the internal node ($v$) and ground.\n   - Its small-signal resistance is:\n     $$R_N = \\frac{1}{g_{mn}} \\parallel r_{on} = \\frac{1}{g_{mn} + g_{on}}$$\n\n---\n\n### **3. Total Small-Signal Resistance**\n\nSince the gates draw no small-signal current, the diode-connected PMOS and NMOS of each inverter are in **series** from the supply node to ground:\n$$R_{\\text{stage}} = R_P + R_N = \\frac{1}{g_{mp} + g_{op}} + \\frac{1}{g_{mn} + g_{on}}$$\n\nSince there are **3 identical inverters** connected in parallel to the supply node:\n$$R_X = \\frac{R_{\\text{stage}}}{3} = \\frac{1}{3} \\left( \\frac{1}{g_{mp} + g_{op}} + \\frac{1}{g_{mn} + g_{on}} \\right)$$\n\n---\n\n### **Final Result**\n\n- **Including channel-length modulation ($r_o$):**\n  $$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mp} + \\frac{1}{r_{op}}} + \\frac{1}{g_{mn} + \\frac{1}{r_{on}}} \\right)$$\n\n- **Neglecting channel-length modulation ($\\lambda = 0$):**\n  $$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mp}} + \\frac{1}{g_{mn}} \\right)$$",
        "format": "markdown",
        "sha256": "acc2b8889a1cda76d2462ab7d0274458b8a4eeea603131920e382a40c00ec8d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static, gm-based resistance from diode-connected inverter intuition and ignores the dominant oscillation-driven charging and discharging of the load capacitances. The golden solution explicitly assigns this type of internally consistent static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 4636,
        "total_tokens": 5748,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 4636,
        "total_tokens": 5748,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes significantly.**\n\nHere is the step-by-step reason why:\n\n---\n\n### 1. Why the Original Formula Holds at the DC Bias Point\nThe formula:\n$$R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$$\nassumes the circuit is at its **static DC equilibrium (metastable) operating point**:\n* At this symmetric bias point, all node voltages are equal to the inverter threshold voltage ($V_1 = V_2 = V_3 = V_M$).\n* Because each stage has its input tied to the output of the previous identical stage, $V_{in} = V_{out} = V_M$ for every inverter.\n* This implies $V_{GS} = V_{DS}$ for both the NMOS and PMOS devices, forcing both to behave as **diode-connected transistors in series** between $V_{DD}$ and ground.\n* With three identical inverters in parallel, the total resistance looking into the supply node is indeed $\\frac{1}{3}(1/g_{mn} + 1/g_{mp})$.\n\n---\n\n### 2. What Happens When the Circuit Oscillates\nWhen the circuit oscillates, it leaves this static operating point and undergoes **large-signal, periodic operation**:\n\n1. **Transistors Are No Longer Diode-Connected:**\n   * Node voltages swing with large amplitude (typically rail-to-rail) and with $120^\\circ$ phase shifts between stages.\n   * $V_{in}$ and $V_{out}$ are no longer equal at any given inverter, so $V_{GS} \\neq V_{DS}$.\n\n2. **Transistors Switch Regions (Cutoff, Triode, Saturation):**\n   * When an inverter's input is near $V_{DD}$, its PMOS is **cut off** ($\\text{OFF}$) and its NMOS is in the **triode** region.\n   * When the input is near ground, the PMOS is in **triode** and the NMOS is **cut off**.\n   * Therefore, for most of the oscillation cycle, the direct path from $V_{DD}$ to ground is broken, and current only flows through the PMOS when charging the load capacitance of the next stage.\n\n3. **Time-Varying / Dynamic Supply Current:**\n   * The current drawn from $V_{DD}$ is primarily dynamic switching current ($I_{avg} \\approx 3 f_0 C_L V_{DD}$, plus a small short-circuit current during transitions).\n   * As a result, the effective average resistance seen by the supply node becomes:\n     $$R_{eff} \\approx \\frac{V_{DD}}{I_{avg}} \\approx \\frac{1}{3 f_0 C_L}$$\n     which is typically **much larger** than $\\frac{1}{3}(1/g_{mn} + 1/g_{mp})$.\n\n4. **Small-Signal Concept Breakdown:**\n   * A static small-signal resistance is only defined around a fixed, time-invariant operating point. In an oscillating circuit, the system becomes **linear time-varying (LTV)**, making the small-signal impedance time-dependent and dynamic rather than a constant static value.",
        "format": "markdown",
        "sha256": "c6e3f2bd5906ac133207cfec5b86a0e9fb77b7b6d76f8576552869913fcfc863"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the capacitive dynamic-current mechanism and obtains RX ≈ 1/(3 f0 CL), but wrongly concludes this is much larger than the static estimate. The oscillation frequency scales inversely with the device on-resistance and load capacitance, so RX remains on the order of the on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 2630,
        "total_tokens": 3827,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 2630,
        "total_tokens": 3827,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes completely.**\n\n---\n\n### Why the original calculation holds *only* when NOT oscillating:\nThe expression $R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$ is derived assuming the circuit sits at its **static DC equilibrium (metastable) point**:\n1. At this equilibrium point, all node voltages are equal: $V_1 = V_2 = V_3 = V_M \\approx V_{DD}/2$.\n2. For a small perturbation $\\Delta V_{DD}$ on the supply, symmetry dictates that all nodes change identically ($\\Delta V_{in} = \\Delta V_{out}$).\n3. Because $\\Delta V_G = \\Delta V_D$, each transistor behaves like a **diode-connected device** ($\\Delta V_{GS} = \\Delta V_{DS}$). \n4. Each inverter thus acts as a series combination of a diode-connected NMOS ($1/g_{mn}$) and a diode-connected PMOS ($1/g_{mp}$), yielding $R_{in,stage} \\approx \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}$. With three identical stages in parallel, $R_X = \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$.\n\n---\n\n### What changes when the circuit oscillates:\n\nWhen the ring oscillator is oscillating, the static small-signal model is no longer valid for several key reasons:\n\n1. **Large-Signal / Non-Linear Operation:**\n   The node voltages do not remain at the DC equilibrium point ($V_{DD}/2$); instead, they undergo large-signal, rail-to-rail swings ($0$ to $V_{DD}$) out of phase with one another.\n\n2. **Transistor Operating Regions:**\n   - For most of the oscillation period, the transistors in each inverter are **not in saturation**: one transistor is fully **OFF (cutoff)** while the other is in the **triode (linear) region**.\n   - The devices only operate in the active/saturation region for a very brief duration during the switching transitions. Thus, the inverters do not behave as continuous diode-connected devices.\n\n3. **Dynamic Current Dominates the Supply:**\n   The supply current is no longer a static DC bias current. Instead, the average current drawn from the supply is dominated by:\n   - **Capacitive charging/discharging current:** $I_{\\text{dyn}} = 3 \\cdot C_L \\cdot V_{DD} \\cdot f_{\\text{osc}}$, where $C_L$ is the total load capacitance at each node and $f_{\\text{osc}}$ is the oscillation frequency.\n   - **Crowbar (short-circuit) current** during switching transitions.\n\n4. **Effective Resistance is Frequency- and Voltage-Dependent:**\n   The effective low-frequency resistance looking into the supply becomes:\n   $$R_X = \\left( \\frac{\\partial I_{\\text{supply,avg}}}{\\partial V_{DD}} \\right)^{-1}$$\n   Because the oscillation frequency $f_{\\text{osc}}$ itself increases with $V_{DD}$ (due to larger overdrive voltages and charging currents), $I_{\\text{supply,avg}}$ depends non-linearly on $V_{DD}$ and capacitance $C_L$. \n\n### Conclusion:\nBecause the circuit transitions from a static bias point to a time-varying, large-signal periodic regime dominated by dynamic capacitive switching, the small-signal resistance $R_X$ changes completely and cannot be represented by the static transconductance formula.",
        "format": "markdown",
        "sha256": "92e94a13544afdaf75f06b615847bd3f0dd2ea09b71ae3964dd80a53709b798c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies capacitive switching as the dynamic supply-current mechanism and gives the corresponding average-current relation. However, it does not establish that RX remains on the order of the MOS on-resistance; it instead says the resistance changes completely, missing the key magnitude conclusion.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 3870,
        "total_tokens": 5067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3076,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 3870,
        "total_tokens": 5067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3076,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes completely.** \n\nHere is the step-by-step explanation of why:\n\n---\n\n### 1. Where the Original Formula Comes From\nThe formula \n$$R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$$ \nis valid **only when the circuit is trapped at its static (metastable) equilibrium point**, where:\n- All three inverter inputs and outputs sit at the exact same intermediate voltage: $V_1 = V_2 = V_3 = V_M \\approx V_{DD}/2$.\n- Both NMOS and PMOS in every stage are simultaneously in saturation.\n- By symmetry, any small-signal perturbation $v_x$ on the supply causes all three internal nodes to shift equally ($v_1 = v_2 = v_3 = v_o$). Because $v_{in} = v_{out}$ for each stage, both the NMOS and PMOS act as diode-connected devices in series, giving an impedance of $(1/g_{mn} + 1/g_{mp})$ per inverter, or $\\frac{1}{3}(1/g_{mn} + 1/g_{mp})$ for all three in parallel.\n\n---\n\n### 2. Why the Answer Changes When the Circuit Oscillates\n\nWhen the ring oscillator oscillates, the assumptions behind this calculation completely break down for several reasons:\n\n1. **Large-Signal Operation (Loss of DC Operating Point):**\n   - The circuit no longer sits at the metastable bias point $V_M$. Instead, the node voltages undergo large-signal, rail-to-rail (or near rail-to-rail) periodic swings. \n   - Transconductances $g_{mn}$ and $g_{mp}$ are defined only for small signals around a constant DC operating point. In oscillation, they vary drastically with time.\n\n2. **Transistors Spend Most Time in Cutoff or Triode:**\n   - In steady-state oscillation, at almost any given moment:\n     - When an inverter's input is HIGH ($\\approx V_{DD}$), the NMOS is in deep triode and the PMOS is in **cutoff** ($V_{GS,p} \\approx 0$). In this state, the PMOS conducts no current from $V_{DD}$ ($R \\to \\infty$).\n     - When an inverter's input is LOW ($\\approx 0$), the PMOS is in deep triode and the NMOS is in **cutoff**. No DC path to ground exists through that inverter.\n   - Both NMOS and PMOS are simultaneously in saturation (conducting shoot-through/crowbar current) only for a very brief instant during transitions.\n\n3. **Loss of Instantaneous Symmetry:**\n   - The three stages oscillate with a phase shift of $120^\\circ$ relative to one another. At any instant in time, $V_1(t) \\neq V_2(t) \\neq V_3(t)$, so the stages are in completely different conducting states and cannot be modeled as three identical diode-connected stages in parallel.\n\n4. **Dynamic Supply Current:**\n   - The current drawn from the supply is no longer a static conduction current; it is primarily the dynamic current required to charge and discharge the nodal capacitance $C_L$ at the oscillation frequency $f_{osc}$:\n     $$I_{avg} \\approx 3 \\cdot f_{osc} C_L V_{DD} + I_{\\text{short-circuit}}$$\n   - The effective supply resistance is determined by the oscillation frequency and load capacitance rather than the small-signal transconductances.\n\n---\n\n### Conclusion\n**Yes, the answer changes.** The static small-signal resistance formula applies only at the non-oscillating metastable equilibrium point. During oscillation, the circuit becomes a large-signal, periodically time-varying system where the effective impedance looking into the supply is primarily determined by dynamic switching and load capacitances.",
        "format": "markdown",
        "sha256": "b6810d279f768c15d3755bcd9a69cfca69eeb1f3146b317ed4821e2c91659eec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Identifies the capacitive switching-current mechanism, with a current expression equivalent to RX ≈ 1/(3 fosc CL). However, it does not establish that RX remains on the order of the MOS on-resistance or inverse transconductance, and its claim that the answer changes completely overstates the difference.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 4414,
        "total_tokens": 5611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 4414,
        "total_tokens": 5611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit (a classic **StrongARM latch / clocked comparator**), as the width of transistor $M_7$ ($W_7$) increases, the **initial voltage gain decreases**.\n\n---\n\n### **Detailed Derivation and Explanation**\n\n#### **1. Initial Phase of Operation (Integration/Sensing Phase)**\n* **Reset State ($CK = 0$):** Nodes $P, Q, X,$ and $Y$ are precharged to $V_{DD}$ via switch transistors $S_1$–$S_4$, and the tail transistor $M_7$ is OFF.\n* **Evaluation Begins ($CK \\rightarrow V_{DD}$):** \n  * $S_1$–$S_4$ turn OFF and $M_7$ turns ON, pulling down the common-source node of input transistors $M_1$ and $M_2$.\n  * $M_1$ and $M_2$ turn ON and discharge the parasitic capacitances at nodes $P$ and $Q$ ($C_P$ and $C_Q$) with currents $I_{D1}$ and $I_{D2}$.\n  * Transistors $M_3$ and $M_4$ remain OFF until nodes $P$ and $Q$ drop by at least one threshold voltage ($V_{TH3,4}$) below $V_{DD}$.\n\n---\n\n#### **2. Derivation of Initial Voltage Gain**\nThe time $\\Delta t$ required for nodes $P$ and $Q$ to fall by $V_{TH3,4}$ is given by:\n$$\\Delta t \\approx \\frac{C_P \\cdot V_{TH3,4}}{I_D}$$\nwhere $I_D \\approx \\frac{I_{SS}}{2}$ is the average current drawn by each input branch.\n\nDuring this interval, an input differential voltage $\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$ produces a differential current $\\Delta I_D = g_{m1,2} \\Delta V_{\\text{in}}$, creating a differential voltage $\\Delta V_{P,Q}$ across nodes $P$ and $Q$:\n$$\\Delta V_{P,Q} = \\frac{\\Delta I_D \\cdot \\Delta t}{C_P} = \\frac{(g_{m1,2} \\Delta V_{\\text{in}}) \\cdot \\Delta t}{C_P}$$\n\nSubstituting $\\Delta t$ into this expression:\n$$\\Delta V_{P,Q} = \\frac{g_{m1,2} \\Delta V_{\\text{in}}}{C_P} \\cdot \\frac{C_P V_{TH3,4}}{I_D} = \\left(\\frac{g_{m1,2}}{I_D} V_{TH3,4}\\right) \\Delta V_{\\text{in}}$$\n\nThus, the **initial voltage gain** $A_v$ is:\n$$A_v = \\frac{\\Delta V_{P,Q}}{\\Delta V_{\\text{in}}} = \\frac{g_{m1,2}}{I_D} V_{TH3,4}$$\n\nUsing the square-law MOS model where $\\frac{g_m}{I_D} = \\frac{2}{V_{GS} - V_{TH}}$:\n$$A_v = \\frac{2 V_{TH3,4}}{V_{GS1,2} - V_{TH1,2}}$$\n\n---\n\n#### **3. Effect of Increasing the Width of $M_7$**\n1. **Higher Tail Current:** A larger $W_7$ lowers the on-resistance of $M_7$, increasing the tail discharge current $I_{SS}$ and consequently the drain currents $I_{D1,2}$.\n2. **Higher Overdrive Voltage:** As $I_{D1,2}$ increases, the overdrive voltage $(V_{GS1,2} - V_{TH1,2})$ of the input pair increases.\n3. **Lower Transconductance Efficiency ($g_m/I_D$):** Since $\\frac{g_m}{I_D} \\propto \\frac{1}{\\sqrt{I_D}} \\propto \\frac{1}{V_{GS}-V_{TH}}$, the current efficiency of the input pair drops.\n4. **Reduced Integration Time:** Nodes $P$ and $Q$ discharge faster, leaving less time to integrate the input differential current onto $C_P$ and $C_Q$.\n\n---\n\n### **Conclusion**\nAs the width of $M_7$ increases:\n* The circuit discharges faster (reduced delay/higher speed).\n* The **initial voltage gain decreases**, representing a fundamental trade-off between comparator speed and pre-regeneration gain/input sensitivity.",
        "format": "markdown",
        "sha256": "ffc5159fd2fbeefea2a88d381e9dc20706f47dad6b40fccd7d2d27274e5a03e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that initial gain decreases as M7 widens and explains that the increased tail current lowers the input pair’s gm/ID (and integration gain). The derivation is consistent with the golden solution; minor modeling assumptions do not change the result.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 4350,
        "total_tokens": 5439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 4350,
        "total_tokens": 5439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the **StrongARM latch (dynamic comparator)** shown in the figure, as the width of the tail transistor $M_7$ ($W_7$) increases, the **initial voltage gain decreases**.\n\n---\n\n### **Detailed Explanation and Derivation**\n\n#### **1. Definition of Initial Voltage Gain**\nWhen the clock $CK$ goes high ($V_{DD}$), the circuit leaves the reset phase and enters the amplification (pre-regeneration) phase:\n1. $M_7$ turns on and establishes a tail current $I_{SS}$.\n2. Nodes $P$ and $Q$ discharge from $V_{DD}$ until they drop by an NMOS threshold voltage ($V_{THN}$), turning on $M_3$ and $M_4$.\n3. Nodes $X$ and $Y$ then begin discharging from $V_{DD}$ through $M_3-M_1$ and $M_4-M_2$.\n4. Once the output nodes $X$ and $Y$ fall by $|V_{THP}|$, the cross-coupled PMOS pair $M_5$ and $M_6$ turns on, initiating regenerative (positive feedback) latching.\n\nThe **initial voltage gain** ($A_0$) is the voltage gain from the differential input ($\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$) to the differential output ($\\Delta V_{\\text{out}} = V_X - V_Y$) developed just before regeneration begins.\n\n---\n\n#### **2. Mathematical Formulation**\nDuring the pre-regeneration phase:\n- The input pair converts the input differential voltage into a differential current:\n  $$\\Delta I = g_{m1,2} \\Delta V_{\\text{in}}$$\n\n- This current discharges the load capacitance at the output nodes ($C_{\\text{out}}$) over the time interval $\\Delta t$ required for the common-mode output voltage to drop by $|V_{THP}|$:\n  $$\\Delta t \\approx \\frac{C_{\\text{out}} |V_{THP}|}{I_{D1,2}} = \\frac{C_{\\text{out}} |V_{THP}|}{I_{SS}/2}$$\n\n- The differential output voltage developed at the onset of regeneration is:\n  $$\\Delta V_{\\text{out}} = \\frac{\\Delta I \\cdot \\Delta t}{C_{\\text{out}}} = \\frac{g_{m1,2} \\Delta V_{\\text{in}}}{C_{\\text{out}}} \\left( \\frac{C_{\\text{out}} |V_{THP}|}{I_{SS}/2} \\right) = \\frac{g_{m1,2}}{I_{D1,2}} |V_{THP}| \\Delta V_{\\text{in}}$$\n\n- Thus, the initial voltage gain $A_0$ is given by:\n  $$A_0 = \\frac{\\Delta V_{\\text{out}}}{\\Delta V_{\\text{in}}} = \\frac{g_{m1,2}}{I_{D1,2}} |V_{THP}| = \\frac{2 |V_{THP}|}{V_{GS1,2} - V_{TH1,2}} = \\frac{2 |V_{THP}|}{V_{ov1,2}}$$\n\n---\n\n#### **3. Effect of Increasing the Width of $M_7$ ($W_7$)**\n1. **Increase in Tail Current ($I_{SS}$):** As $W_7$ increases, the tail current $I_{SS}$ drawn by $M_7$ increases.\n2. **Increase in Overdrive Voltage ($V_{ov1,2}$):** Since $I_{D1,2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_{1,2} V_{ov1,2}^2$, a larger tail current forces a higher overdrive voltage on the input pair ($V_{ov1,2} \\propto \\sqrt{I_{SS}} \\propto \\sqrt{W_7}$).\n3. **Decrease in Gain ($A_0$):** Since $A_0 \\propto \\frac{1}{V_{ov1,2}} \\propto \\frac{1}{\\sqrt{W_7}}$, the initial voltage gain **decreases**.\n\n---\n\n### **Intuitive Summary**\nIncreasing $W_7$ increases the discharge current, which causes the output nodes to discharge much faster ($\\Delta t \\propto 1/I_{SS}$). Although the transconductance $g_{m1,2}$ increases with $\\sqrt{I_{SS}}$, the integration time decreases at a faster rate ($1/I_{SS}$), leaving less time for the input pair to integrate the differential signal onto the output nodes before regeneration starts. Consequently, **the initial voltage gain decreases**.",
        "format": "markdown",
        "sha256": "781039582d0918a02721603aba5c03035b823cdfa11367f4012c72eb644b4082"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that initial gain decreases as M7 widens. It explains that the increased tail current raises input-pair overdrive while gm grows more slowly, reducing the integration gain; its approximate threshold and constant choices do not change the essential result.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 6205,
        "total_tokens": 7294,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5153,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 6205,
        "total_tokens": 7294,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5153,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown (the classic **StrongARM dynamic latch/comparator**), as the width of transistor $M_7$ ($W_7$) increases, the **initial voltage gain decreases**.\n\n---\n\n### **Detailed Explanation**\n\n#### **1. Circuit Operation During Amplification Phase**\n* When $CK = 0$ (Reset Phase), the switches $S_1 - S_4$ pull nodes $P, Q, X,$ and $Y$ to $V_{DD}$, and $M_7$ is off.\n* When $CK$ transitions from $0$ to $V_{DD}$ (Evaluation Phase), $S_1 - S_4$ turn off and $M_7$ turns on, establishing a tail current $I_{SS}$.\n* Nodes $P$ and $Q$ discharge through $M_1$ and $M_2$. When their voltages drop sufficiently, $M_3$ and $M_4$ turn on, causing nodes $X$ and $Y$ to discharge from $V_{DD}$.\n* An input difference $\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$ produces a differential current:\n  $$\\Delta I = g_{m1,2} \\Delta V_{\\text{in}}$$\n* This current difference discharges the capacitances at nodes $X$ and $Y$ at different rates, integrating a differential voltage $\\Delta V_{\\text{out}}$ until nodes $X$ and $Y$ drop to $V_{DD} - |V_{THP}|$, at which point the cross-coupled PMOS pair ($M_5, M_6$) turns on and initiates positive feedback (regeneration).\n\n---\n\n#### **2. Derivation of the Initial Voltage Gain**\nThe time $\\Delta t$ required for the output nodes to discharge by $|V_{THP}|$ is inversely proportional to the bias current:\n$$\\Delta t \\approx \\frac{C_{\\text{out}} |V_{THP}|}{I_D}$$\nwhere $I_D \\approx \\frac{I_{SS}}{2}$ is the nominal drain current of $M_1$ and $M_2$.\n\nThe initial differential voltage established across $X$ and $Y$ just before regeneration starts is:\n$$\\Delta V_{\\text{out}} \\approx \\frac{\\Delta I \\cdot \\Delta t}{C_{\\text{out}}} = \\frac{g_{m1,2} \\Delta V_{\\text{in}} \\cdot \\Delta t}{C_{\\text{out}}}$$\n\nSubstituting $\\Delta t$:\n$$\\Delta V_{\\text{out}} = \\left(\\frac{g_{m1,2} |V_{THP}|}{I_D}\\right) \\Delta V_{\\text{in}}$$\n\nThus, the **initial voltage gain** ($A_0$) is:\n$$A_0 = \\frac{\\Delta V_{\\text{out}}}{\\Delta V_{\\text{in}}} = \\frac{g_{m1,2}}{I_D} |V_{THP}| = \\frac{2 |V_{THP}|}{V_{GS1,2} - V_{TH1,2}}$$\n\n---\n\n#### **3. Effect of Increasing $W_7$**\n1. **Higher Current ($I_{SS}$):** Increasing the width of $M_7$ lowers its on-resistance and increases the tail current $I_{SS}$.\n2. **Shorter Integration Time:** The nodes discharge faster ($\\Delta t \\propto 1/I_{SS}$), giving less time for the input pair to integrate the differential current.\n3. **Gain Dependency:** Since $g_{m1,2} \\propto \\sqrt{I_{SS}}$:\n   $$A_0 \\propto \\frac{g_{m1,2}}{I_{SS}} \\propto \\frac{\\sqrt{I_{SS}}}{I_{SS}} = \\frac{1}{\\sqrt{I_{SS}}}$$\n   Equivalently, the overdrive voltage $(V_{GS1,2} - V_{TH1,2})$ increases, which directly lowers the transconductance efficiency $\\left(\\frac{g_m}{I_D}\\right)$.\n\n---\n\n### **Conclusion**\nAs the width of $M_7$ increases:\n* The **initial voltage gain decreases**.\n* *(Design trade-off: A larger $M_7$ improves the latching speed / reduces delay, but the lower initial gain increases the input-referred offset and noise of the comparator.)*",
        "format": "markdown",
        "sha256": "077f80bc57a333ae27d17e9519aceb2b0eb07d856a39a83036eb7bce526e4206"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain decreases and explains that a wider M7 raises tail current, shortens integration time, and reduces the relevant gm/ID factor. Its approximate derivation does not change the essential trend or mechanism.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 5919,
        "total_tokens": 7008,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4947,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 5919,
        "total_tokens": 7008,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4947,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the capacitance at nodes **P** and **Q** ($C_P, C_Q$) is increased, the **initial voltage gain increases**.\n\n---\n\n### **Detailed Explanation:**\n\n1. **Operation Before Regeneration:**\n   * **Reset Phase ($CK = 0$):** Nodes $P, Q, X,$ and $Y$ are precharged to $V_{DD}$ through the reset switches $S_1 - S_4$.\n   * **Discharge/Integration Phase ($CK \\to V_{DD}$):** \n     * $M_7$ turns on, and the input differential pair ($M_1, M_2$) draws current proportional to the input voltages, creating a differential current $\\Delta I = g_{m1,2} \\Delta V_{\\text{in}}$.\n     * Nodes $P$ and $Q$ begin discharging. Once their voltages fall by an NMOS threshold voltage ($V_{THN}$), transistors $M_3$ and $M_4$ turn on and start discharging output nodes $X$ and $Y$.\n     * This integration phase continues until nodes $X$ and $Y$ drop to $V_{DD} - |V_{THP}|$, at which point the PMOS cross-coupled pair ($M_5, M_6$) turns on and regenerative positive feedback takes over.\n\n2. **Why the Initial Gain Increases:**\n   * The **initial voltage gain** ($A_{v0} = \\Delta V_{XY} / \\Delta V_{\\text{in}}$) is the voltage gain established at the output nodes before the PMOS regenerative latching begins.\n   * With larger capacitances at nodes $P$ and $Q$, it takes a **longer time** for the circuit to discharge nodes $P, Q, X,$ and $Y$ to the threshold voltage ($V_{DD} - |V_{THP}|$).\n   * Because the integration time ($t_{\\text{int}}$) is extended, the input differential pair integrates the differential current ($\\Delta I$) for a longer duration, accumulating more differential charge:\n     $$\\Delta Q = \\Delta I \\cdot t_{\\text{int}} = g_{m1,2} \\Delta V_{\\text{in}} \\cdot t_{\\text{int}}$$\n   * This results in a larger differential voltage $\\Delta V_{XY}$ developed at the output nodes before regeneration begins, meaning the **initial voltage gain increases**.\n\n---\n\n### **Summary of Trade-offs:**\n* **Advantage:** Higher initial gain reduces the input-referred offset and noise of the comparator.\n* **Disadvantage:** Increased delay (slower decision/sampling speed) and higher dynamic power consumption due to charging and discharging larger capacitances each clock cycle.",
        "format": "markdown",
        "sha256": "f74070511e2034db359f95a30dd7d2a1f0a8a85894b105993cdc83e4360ca312"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance slows the transient, but wrongly concludes that the initial gain increases by treating the longer delay as extra differential integration. In Razavi’s initial-gain relation, the longer amplification interval cancels the slower voltage buildup, so the gain remains approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 8561,
        "total_tokens": 9649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7980,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 8561,
        "total_tokens": 9649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7980,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To a first-order approximation, **the initial voltage gain remains unchanged** (it is independent of the capacitance at nodes $P$ and $Q$).\n\n---\n\n### **Detailed Explanation & Derivation**\n\nIn a StrongARM latch, the comparison process begins when the clock signal $CK$ transitions from low to high ($V_{DD}$), turning on the tail transistor $M_7$ and turning off the reset switches $S_1 - S_4$. \n\nThe initial amplification phase proceeds as follows:\n\n#### **1. Discharging Nodes $P$ and $Q$ (Phase 1)**\nBefore regeneration starts, nodes $P$ and $Q$ (precharged to $V_{DD}$) are discharged by the input transistors $M_1$ and $M_2$:\n* The differential input $\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$ creates a differential current:\n  $$\\Delta I = g_{m1,2} \\Delta V_{\\text{in}}$$\n* The rate of voltage drop at nodes $P$ and $Q$ is inversely proportional to the capacitance $C_P$ ($C_Q$):\n  $$\\frac{d(\\Delta V_{PQ})}{dt} = \\frac{\\Delta I}{C_P} = \\frac{g_{m1,2} \\Delta V_{\\text{in}}}{C_P}$$\n\n#### **2. Transition to Phase 2**\nTransistors $M_3$ and $M_4$ turn on once nodes $P$ and $Q$ drop by an NMOS threshold voltage $V_{\\text{TH3,4}}$ below $V_{DD}$. The time $\\Delta t_1$ required for this to happen is directly proportional to $C_P$:\n$$\\Delta t_1 \\approx \\frac{C_P \\cdot V_{\\text{TH3,4}}}{I_{SS}/2}$$\n*(where $I_{SS}$ is the tail current).*\n\n#### **3. Resulting Differential Voltage at Nodes $P$ and $Q$**\nMultiplying the discharge rate by the duration of this phase:\n$$\\Delta V_{PQ}(\\Delta t_1) = \\left(\\frac{\\Delta I}{C_P}\\right) \\Delta t_1 = \\left(\\frac{g_{m1,2} \\Delta V_{\\text{in}}}{C_P}\\right) \\left(\\frac{C_P \\cdot V_{\\text{TH3,4}}}{I_{SS}/2}\\right) = \\frac{2 g_{m1,2} V_{\\text{TH3,4}}}{I_{SS}} \\Delta V_{\\text{in}}$$\n\nNotice that **$C_P$ cancels out completely**:\n* A larger capacitance **reduces** the rate of discharge ($\\propto 1/C_P$).\n* However, it **increases** the discharge time proportionally ($\\propto C_P$).\n\n---\n\n### **Summary of Effects**\n\n1. **Initial Voltage Gain:** **Unchanged** (independent of $C_P$ and $C_Q$).\n2. **Speed / Delay:** **Degrades** (the latch becomes slower because discharging larger capacitances takes more time).\n3. **Noise & Offset (Second-order):** Larger capacitance reduces $kT/C$ thermal noise bandwidth and can slightly improve the input-referred sensitivity/offset at the cost of operating speed.",
        "format": "markdown",
        "sha256": "912be571d8c7c2eebc8ea0a68b4c2c55f8a7a7c31c7fbe12cb31cb3d3d3b845d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes the initial gain is unchanged and shows that the reduced differential-voltage slope is offset by a proportionally longer amplification phase. The extra noise comment is secondary and does not affect the essential answer.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 10311,
        "total_tokens": 11399,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9579,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 10311,
        "total_tokens": 11399,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9579,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To first order, the **initial voltage gain remains unchanged (is independent of the capacitance at nodes $P$ and $Q$)**. \n\nHowever, increasing the capacitance at nodes $P$ and $Q$ will **increase the delay** (slow down the comparator).\n\n---\n\n### **Detailed Derivation and Explanation**\n\nThe operation of the StrongARM latch comparator occurs in distinct phases after the clock ($CK$) transitions from low to high:\n\n#### **Phase 1: Discharging Nodes $P$ and $Q$**\n1. When $CK$ goes high, the tail transistor $M_7$ turns on, and the input pair $M_1, M_2$ begins discharging nodes $P$ and $Q$ from $V_{DD}$.\n2. Transistors $M_3$ and $M_4$ are initially **off** because their gate-to-source voltages are zero ($V_X = V_Y = V_{DD}$ and $V_P = V_Q = V_{DD}$).\n3. The time $t_1$ required for nodes $P$ and $Q$ to discharge by a threshold voltage $V_{THN3,4}$ (at which point $M_3$ and $M_4$ turn on) is:\n   $$t_1 \\approx \\frac{C_P \\cdot V_{THN3,4}}{I_{D1,2}}$$\n   where $C_P = C_Q$ is the capacitance at nodes $P$ and $Q$, and $I_{D1,2} \\approx \\frac{I_{SS}}{2}$ is the bias current through each input branch.\n\n4. The differential voltage developed between nodes $P$ and $Q$ during this time is given by:\n   $$\\Delta V_{PQ} = \\frac{\\Delta I \\cdot t_1}{C_P}$$\n   Since $\\Delta I = g_{m1,2} \\Delta V_{\\text{in}}$:\n   $$\\Delta V_{PQ} = \\frac{g_{m1,2} \\Delta V_{\\text{in}}}{C_P} \\cdot \\left(\\frac{C_P \\cdot V_{THN3,4}}{I_{D1,2}}\\right) = \\frac{g_{m1,2} V_{THN3,4}}{I_{D1,2}} \\Delta V_{\\text{in}} = \\frac{2 V_{THN3,4}}{V_{GS1,2} - V_{THN1,2}} \\Delta V_{\\text{in}}$$\n\n   > **Key Observation:** The capacitance $C_P$ in the numerator and denominator **cancels out**, making the differential voltage $\\Delta V_{PQ}$ at the end of this phase independent of $C_P$ and $C_Q$.\n\n---\n\n#### **Phase 2: Discharging Nodes $X$ and $Y$ (Pre-Regeneration Gain)**\n1. Once $M_3$ and $M_4$ turn on, they draw currents from nodes $X$ and $Y$ (capacitances $C_X, C_Y$) until the PMOS cross-coupled pair ($M_5, M_6$) turns on at $V_{DD} - |V_{THP5,6}|$, initiating positive-feedback regeneration.\n2. The differential voltage $\\Delta V_{XY}$ established at nodes $X$ and $Y$ prior to regeneration is similarly governed by the ratio of current integration to nodal capacitance, where the load capacitances also cancel out to first order.\n\nConsequently, the initial voltage gain:\n$$A_{v0} = \\frac{\\Delta V_{\\text{out}}}{\\Delta V_{\\text{in}}}$$\nis **independent of $C_P$ and $C_Q$**.\n\n---\n\n### **Summary of Effects of Increasing $C_P$ and $C_Q$**\n* **Initial Voltage Gain:** **Unchanged** (to first order).\n* **Speed / Delay:** **Degrades (increases delay)** because discharging larger capacitances at $P$ and $Q$ takes more time ($t_1 \\propto C_P$).\n* **Power & Noise:** Dynamic power consumption increases, and input-referred kickback noise increases.",
        "format": "markdown",
        "sha256": "f2c712126515dc9ab5241a0fc3692b3d389311c36c176b85c9c2ba38418f5d4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is unchanged and shows the key cancellation: the larger capacitance lengthens the discharge interval in proportion, offsetting the smaller voltage slope. The added phase details and secondary claims do not alter the essential answer.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 10560,
        "total_tokens": 11648,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 10560,
        "total_tokens": 11648,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of **$M_5$ and $M_6$ generally degrades the speed** (i.e., increases the overall latch delay). \n\nHere is a detailed explanation of why this happens:\n\n---\n\n### 1. Increased Discharge Time (Pre-Regeneration Phase)\n* At the beginning of the evaluation phase (when $CK$ goes high), nodes $X$ and $Y$ are initially at $V_{DD}$, meaning $M_5$ and $M_6$ are **off**.\n* Nodes $X$ and $Y$ must first be discharged by the NMOS path ($M_1\\text{–}M_3$ and $M_2\\text{–}M_4$) until their voltages drop below $V_{DD} - |V_{THP}|$, at which point $M_5$ and $M_6$ turn on.\n* Increasing the widths of $M_5$ and $M_6$ adds significant parasitic capacitance (gate capacitance $C_{GS}, C_{GD}$, and drain junction capacitance) to nodes $X$ and $Y$.\n* This larger capacitance increases the time required to discharge the output nodes to the threshold where regeneration begins.\n\n---\n\n### 2. Slower Regeneration Time Constant\n* Once $M_5$ and $M_6$ turn on, the regeneration time constant of the cross-coupled back-to-back inverters is approximately:\n  $$\\tau_{\\text{reg}} \\approx \\frac{C_{X,Y}}{g_{m,N} + g_{m,P}}$$\n  where $C_{X,Y}$ is the total capacitance at the output nodes, $g_{m,N}$ is the transconductance of $M_3/M_4$, and $g_{m,P}$ is the transconductance of $M_5/M_6$.\n* Because hole mobility is much lower than electron mobility ($\\mu_p \\ll \\mu_n$), the increase in transconductance ($\\Delta g_{m,P}$) gained by making PMOS transistors wider is relatively small compared to the substantial capacitance ($\\Delta C_{X,Y}$) added to the nodes.\n* As a result, the ratio $\\frac{C_{X,Y}}{g_{m,N} + g_{m,P}}$ increases, lengthening the regeneration time.\n\n---\n\n### Conclusion & Design Practice\nBecause the added capacitive loading outweighs the small transconductance benefit of the PMOS transistors, **speed degrades**. For this reason, in a StrongARM latch design, **$M_5$ and $M_6$ are typically kept close to minimum size**—just large enough to reliably pull the output to $V_{DD}$ and resist leakage.",
        "format": "markdown",
        "sha256": "5eadbb2f4b04e8fed5fbf2a430571e362b463b494b0beb1c58510d3f450adfaa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that wider M5/M6 add capacitance and increase transconductance, but wrongly concludes that capacitance dominates from the outset and speed degrades. The key result is that stronger regeneration initially improves speed, with added capacitance limiting the benefit only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 4277,
        "total_tokens": 5365,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3691,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 4277,
        "total_tokens": 5365,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3691,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the StrongARM latch (dynamic comparator) shown in the figure, increasing the widths of the PMOS transistors **$M_5$ and $M_6$ generally degrades the overall speed** (or offers diminishing returns leading to slower operation). \n\nHere is the step-by-step breakdown of why this happens:\n\n---\n\n### 1. Discharge / Sampling Phase (Speed Degrades)\n* When $CK$ goes high, the reset switches ($S_1$–$S_4$) turn off, and the tail transistor $M_7$ turns on.\n* Initially, nodes $X$ and $Y$ are at $V_{DD}$. Therefore, **$M_5$ and $M_6$ are completely OFF** ($V_{GS} = 0$) until nodes $X$ and $Y$ drop below $V_{DD} - |V_{THP}|$.\n* During this initial discharging and amplification phase, $M_5$ and $M_6$ **provide zero transconductance ($g_m = 0$)**, but their parasitic capacitances ($C_{gd}$, $C_{gs}$, and $C_{db}$) load nodes $X$ and $Y$.\n* Increasing the widths of $M_5$ and $M_6$ directly increases the capacitive load at nodes $X$ and $Y$, **increasing the time required** for the differential voltage to develop and for $M_5/M_6$ to turn on.\n\n---\n\n### 2. Regeneration Phase (Modest Gain vs. Added Capacitance)\n* Once $V_X$ and $V_Y$ drop below $V_{DD} - |V_{THP}|$, $M_5$ and $M_6$ turn on and contribute to the positive feedback regeneration.\n* The regeneration time constant is given by:\n  $$\\tau_{reg} \\approx \\frac{C_{total}}{g_{m,N} + g_{m,P}}$$\n* While increasing $W_5$ and $W_6$ increases $g_{m,P}$, it also increases $C_{total}$ (self-loading). \n* Since hole mobility is significantly lower than electron mobility ($\\mu_p < \\mu_n$), the transconductance of the NMOS pair ($M_3, M_4$) dominates the regeneration. The fractional increase in $(g_{m,N} + g_{m,P})$ is often smaller than or comparable to the fractional increase in $C_{total}$.\n\n---\n\n### Conclusion\nBecause larger $M_5$ and $M_6$ add pure capacitive penalty during the first phase and provide minimal regeneration benefit in the second phase, **increasing their widths increases the total decision delay (i.e., the speed degrades)**. \n\nFor this reason, $M_5$ and $M_6$ are typically designed with **near-minimum channel widths** in high-speed StrongARM comparators.",
        "format": "markdown",
        "sha256": "fe26f263ea8fa783d8feca244cbc3e055ab8bd7dee6a7912a27f6938c31de01d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer recognizes that wider M5/M6 increase regenerative transconductance as well as parasitic capacitance, but incorrectly claims the capacitance dominates from the outset and concludes that speed degrades. The golden solution says regeneration wins initially, with capacitance limiting the benefit only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 3819,
        "total_tokens": 4907,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3191,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 3819,
        "total_tokens": 4907,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3191,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of **$M_5$ and $M_6$ generally degrades the speed** (i.e., increases the total decision/delay time) of the StrongARM latch comparator.\n\n---\n\n### Detailed Explanation\n\nThe operation of the StrongARM latch after the clock goes high ($CK = 1$) consists of two main phases:\n\n#### 1. Integration / Discharge Phase ($t_{\\text{int}}$)\n* When $CK$ goes high, $M_7$ turns on, discharging nodes $P$ and $Q$.\n* Once $P$ and $Q$ drop enough to turn on $M_3$ and $M_4$, the output nodes $X$ and $Y$ begin to discharge from $V_{DD}$.\n* During this entire initial phase, **$M_5$ and $M_6$ are completely OFF** (since $V_X, V_Y \\approx V_{DD}$, so $|V_{GS5,6}| \\approx 0$).\n* Consequently, $M_5$ and $M_6$ contribute **no active current or transconductance ($g_m = 0$)**, acting **purely as parasitic capacitive loads** ($C_{db5,6}, C_{gd5,6}, C_{gs5,6}$) at nodes $X$ and $Y$.\n* **Impact of larger $W_5, W_6$:** The total capacitance at nodes $X$ and $Y$ ($C_L$) increases, directly prolonging the time required for the outputs to discharge down to $V_{DD} - |V_{THP}|$ to initiate regeneration.\n\n---\n\n#### 2. Regeneration Phase ($t_{\\text{reg}}$)\n* Once the voltage at node $X$ or $Y$ drops below $V_{DD} - |V_{THP}|$, the PMOS cross-coupled pair ($M_5, M_6$) turns on, forming a positive feedback loop with $M_3, M_4$.\n* The regeneration time constant is given by:\n  $$\\tau_{\\text{reg}} \\approx \\frac{C_L}{g_{mN} + g_{mP}}$$\n* **Impact of larger $W_5, W_6$:** Although increasing $W_5, W_6$ increases $g_{mP}$, it simultaneously increases $C_L$ (self-loading). Thus, the improvement in $\\tau_{\\text{reg}}$ is very small and diminishes rapidly.\n\n---\n\n### Conclusion\nThe penalty of the increased delay in the **integration/discharge phase** significantly outweighs any slight improvement in the regeneration time constant. Therefore:\n* **Overall speed degrades** (total delay increases).\n* In practice, $M_5$ and $M_6$ are typically sized near the **minimum width** necessary for reliable regeneration to minimize loading on nodes $X$ and $Y$.",
        "format": "markdown",
        "sha256": "63cfbeba029ce3455c07cc115abf4f1fb16e8297258e8840ce1cbfecd0aa4f9c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M5/M6 as cross-coupled PMOS devices and notes that wider devices add capacitance while strengthening regeneration. But it concludes that the added loading dominates from the outset, directly contradicting the key result: speed initially improves because stronger regeneration wins until capacitance eventually limits the benefit.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 4257,
        "total_tokens": 5345,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3635,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 4257,
        "total_tokens": 5345,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3635,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit (a master-slave $\\text{C}^2\\text{MOS}$ divide-by-2 / toggle flip-flop circuit), increasing the widths of the clocked transistors ($W_c$) presents a **fundamental trade-off**:\n\n---\n\n### **1. Short Answer**\n* **Beyond an optimal width, the speed degrades.** \n* If the circuit is already sized near its optimum, increasing the width of the clocked transistors **degrades the speed** due to parasitic self-loading at the internal nodes ($X$ and $Y$) and increased loading on the clock network.\n\n---\n\n### **2. Detailed Physical Analysis**\n\n#### **A. Reduction in Series Resistance (Favors Speed)**\n* The pull-up and pull-down paths each consist of two transistors in series: a data transistor (width $W_d$) and a clocked transistor (width $W_c$).\n* The total equivalent resistance of the charging/discharging path is:\n  $$R_{path} = R_{data} + R_{clock} \\approx \\frac{k}{W_d} + \\frac{k}{W_c}$$\n* Increasing $W_c$ reduces the on-resistance $R_{clock}$ of the clocked transistors, which tends to reduce the RC propagation delay.\n\n#### **B. Increase in Node Capacitance / Self-Loading (Degrades Speed)**\n* Notice that the clocked transistors are placed on the **inner** positions of the stack, directly connected to the output nodes $X$ and $Y$.\n* The total capacitance at node $X$ (or $Y$) is:\n  $$C_{node} = C_{db,clock} + C_{gd,clock} + C_{g,data(next)} + C_{wire}$$\n* The drain junction capacitance $C_{db,clock}$ and overlap capacitance $C_{gd,clock}$ scale **linearly with $W_c$**:\n  $$C_{node} \\approx \\alpha W_c + C_{load}$$\n* As $W_c$ becomes very large, the path resistance reaches a lower bound set by the fixed data transistor ($R_{path} \\to R_{data}$), while the capacitance $C_{node}$ continues to grow linearly without bound. Consequently, the time constant:\n  $$\\tau \\approx \\left(\\frac{k}{W_d} + \\frac{k}{W_c}\\right)(\\alpha W_c + C_{load})$$\n  approaches $\\infty$ as $W_c \\to \\infty$.\n\n#### **C. Clock Line Loading (Degrades Speed)**\n* Increasing $W_c$ increases the gate capacitance ($C_{gg} \\propto W_c$) presented to the clock signals ($CK$ and $\\overline{CK}$).\n* Slower clock transition edges (larger rise and fall times) cause both the master and slave stages to temporarily conduct simultaneously, degrading the maximum toggle frequency ($f_{max}$) and causing race conditions.\n\n---\n\n### **Summary Conclusion**\nThere is a distinct **optimal width** $W_{c,opt} \\approx \\sqrt{\\frac{C_{load}}{\\alpha W_d}} \\cdot W_d$:\n* **If $W_c < W_{c,opt}$:** Increasing $W_c$ initially improves speed because the reduction in channel resistance dominates.\n* **If $W_c \\ge W_{c,opt}$:** Increasing $W_c$ **degrades speed** because the added parasitic junction capacitance (self-loading at nodes $X$ and $Y$) outweighs the diminishing reduction in series resistance.",
        "format": "markdown",
        "sha256": "b6b85c742c26566d18bed90e5fbcf68f350485a9b76cf1d2188717ad38370f85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing clocked-device on-resistance, while added capacitance at X and Y eventually limits or reverses the benefit. The extra clock-loading discussion and approximate optimum formula are not needed for the core conclusion.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 4747,
        "total_tokens": 5844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3977,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 4747,
        "total_tokens": 5844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3977,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In this circuit (a **$C^2\\text{MOS}$ master-slave frequency divider / toggle flip-flop**), increasing the widths of the clocked transistors ($W_{CK}$) presents a **fundamental trade-off**: \n\n> **Short Answer:** \n> The speed **initially improves** as $W_{CK}$ increases from a small value, reaches an **optimal maximum speed**, and then **degrades** if the widths are made too large.\n\n---\n\n### Detailed Analysis\n\n#### 1. Why Speed Improves (Resistance Reduction)\nIn each stage, the charging and discharging paths consist of two transistors in series (one data transistor driven by the signal and one clocked transistor):\n* **Pull-down path:** $M_1$ (data) in series with the clocked NMOS.\n* **Pull-up path:** Data PMOS in series with the clocked PMOS.\n\nThe total on-resistance of the path is:\n$$R_{\\text{total}} = R_{\\text{data}} + R_{CK} \\approx \\frac{1}{\\mu C_{ox} \\left(\\frac{W_{\\text{data}}}{L}\\right)(V_{GS}-V_{TH})} + \\frac{1}{\\mu C_{ox} \\left(\\frac{W_{CK}}{L}\\right)(V_{GS}-V_{TH})}$$\n\nAs $W_{CK}$ increases, $R_{CK} \\propto \\frac{1}{W_{CK}}$ decreases, reducing the total discharge/charge resistance and initially allowing nodes $X$ and $Y$ to transition faster.\n\n---\n\n#### 2. Why Speed Degrades (Capacitive Loading)\nIn this $C^2\\text{MOS}$ topology, the clocked transistors are placed on the **inner side** of the stacks, meaning their drain terminals are directly connected to the sensitive output nodes ($X$ and $Y$):\n\n1. **Output Node Capacitance ($C_X, C_Y$):**\n   The total capacitance at node $X$ (or $Y$) includes the drain-bulk junction capacitances of the clocked transistors:\n   $$C_X = C_{\\text{load, next stage}} + C_{db,\\text{PMOS\\_CK}} + C_{db,\\text{NMOS\\_CK}}$$\n   Since $C_{db} \\propto W_{CK}$, making the clocked transistors wider linearly increases the capacitive load at nodes $X$ and $Y$.\n\n2. **Internal Node Capacitance:**\n   The capacitance at the intermediate node between the data transistor and the clocked transistor ($C_{sb,CK}$) also increases linearly with $W_{CK}$.\n\n3. **Clock Driver Loading:**\n   Wider clocked transistors present a larger gate capacitance ($C_{gg} \\propto W_{CK}$) to the clock distribution network ($CK$ and $\\overline{CK}$), which can degrade clock transition edges in a real circuit.\n\n---\n\n#### 3. Mathematical Delay Formulation (RC Model)\n\nUsing the Elmore delay approximation for node $X$:\n$$\\tau \\approx R_{\\text{data}} C_{\\text{internal}} + (R_{\\text{data}} + R_{CK}) C_X$$\n\nSubstituting the dependencies on $W_{CK}$:\n$$\\tau(W_{CK}) \\approx C_0 + \\frac{A}{W_{CK}} + B \\cdot W_{CK}$$\n\nwhere:\n* $\\frac{A}{W_{CK}}$ represents the benefit of reduced series resistance.\n* $B \\cdot W_{CK}$ represents the penalty of added self-loading capacitance.\n\nSetting $\\frac{d\\tau}{dW_{CK}} = 0$ yields an optimal width:\n$$W_{CK,\\text{opt}} = \\sqrt{\\frac{A}{B}}$$\n\n---\n\n### Summary\n* **For $W_{CK} < W_{CK,\\text{opt}}$:** The reduction in $R_{CK}$ dominates $\\rightarrow$ **Speed improves**.\n* **For $W_{CK} > W_{CK,\\text{opt}}$:** The added parasitic capacitance at nodes $X$ and $Y$ dominates $\\rightarrow$ **Speed degrades**.",
        "format": "markdown",
        "sha256": "63e097f76d1c3b08ecbca62234883347e419cd469e1008b3570e87361ee873ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says widening the clocked transistors initially improves speed by lowering their on-resistance, while added capacitance at the latch nodes eventually limits or reverses the benefit, giving an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 6966,
        "total_tokens": 8063,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6084,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 6966,
        "total_tokens": 8063,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6084,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the $C^2\\text{MOS}$-based frequency divider (toggle flip-flop) shown in the figure, increasing the widths of the clocked transistors ($W_{\\text{clk}}$) presents a fundamental **trade-off**: \n\n* **Initially (for small $W_{\\text{clk}}$):** The speed **improves**.\n* **Beyond an optimal width ($W_{\\text{clk}} > W_{\\text{opt}}$):** The speed **degrades**.\n\n---\n\n### Detailed Analysis\n\n#### 1. Effect on On-Resistance (Improves Speed)\nEach stage consists of an inverter formed by input transistors (outer devices, such as $M_1$) in series with clocked transistors (inner devices). \nThe total pull-down or pull-up resistance is:\n$$R_{\\text{total}} = R_{\\text{input}} + R_{\\text{clk}} = \\frac{k_1}{W_1} + \\frac{k_{\\text{clk}}}{W_{\\text{clk}}}$$\n\nIncreasing $W_{\\text{clk}}$ reduces $R_{\\text{clk}}$, decreasing the total charging/discharging resistance of nodes $X$ and $Y$, which tends to speed up the transitions.\n\n---\n\n#### 2. Effect on Node Capacitance (Degrades Speed)\nBecause the clocked transistors are placed on the **inside** of the stack, their drains are connected **directly** to the critical switching nodes $X$ and $Y$:\n* Node $X$ carries the drain junction and overlap capacitance of both clocked transistors of Stage 1:\n  $$C_X = C_{\\text{drain, clk1}} + C_{\\text{gate, input2}} + C_{\\text{wire}} = \\alpha W_{\\text{clk}} + C_{\\text{load}}$$\n* Node $Y$ similarly carries:\n  $$C_Y = C_{\\text{drain, clk2}} + C_{\\text{gate, Inv3}} + C_{\\text{wire}} = \\alpha W_{\\text{clk}} + C_{\\text{load}}'$$\n\nAs $W_{\\text{clk}}$ increases, the parasitic capacitance ($C_{\\text{drain, clk}} \\propto W_{\\text{clk}}$) at nodes $X$ and $Y$ increases linearly, which slows down the charging and discharging of these nodes.\n\n---\n\n#### 3. Mathematical Delay Formulation & Optimum Sizing\n\nThe propagation delay $\\tau$ for discharging/charging node $X$ (or $Y$) can be approximated by the $RC$ time constant:\n$$\\tau \\approx R_{\\text{total}} \\cdot C_X = \\left( \\frac{k_1}{W_1} + \\frac{k_{\\text{clk}}}{W_{\\text{clk}}} \\right) \\left( \\alpha W_{\\text{clk}} + C_{\\text{load}} \\right)$$\n\nExpanding this expression gives:\n$$\\tau = \\frac{k_1 \\alpha}{W_1} W_{\\text{clk}} + \\frac{k_{\\text{clk}} C_{\\text{load}}}{W_{\\text{clk}}} + \\left( k_1 \\frac{C_{\\text{load}}}{W_1} + k_{\\text{clk}} \\alpha \\right)$$\n\n* **When $W_{\\text{clk}}$ is small:** The term $\\frac{k_{\\text{clk}} C_{\\text{load}}}{W_{\\text{clk}}}$ dominates $\\implies$ Increasing $W_{\\text{clk}}$ **reduces delay (speed improves)**.\n* **When $W_{\\text{clk}}$ is large:** The term $\\frac{k_1 \\alpha}{W_1} W_{\\text{clk}}$ dominates $\\implies$ Increasing $W_{\\text{clk}}$ **increases delay (speed degrades)**.\n\nSetting $\\frac{\\partial \\tau}{\\partial W_{\\text{clk}}} = 0$ yields the optimal width:\n$$W_{\\text{clk, opt}} = \\sqrt{\\frac{k_{\\text{clk}} C_{\\text{load}} W_1}{k_1 \\alpha}} \\sim W_1$$\n\n---\n\n#### 4. Additional Factor: Clock Generator Loading\nIn a practical circuit, the clock lines ($CK$ and $\\overline{CK}$) are driven by a clock buffer with finite output impedance. Increasing $W_{\\text{clk}}$ increases the total gate capacitance seen by the clock network:\n$$C_{\\text{clock}} \\propto W_{\\text{clk}}$$\nThis causes slower clock rise and fall times (slower edges), which further **degrades** the maximum operating frequency of the divider.\n\n---\n\n### Conclusion\n* **Small $W_{\\text{clk}}$:** Resistance reduction dominates $\\rightarrow$ **Speed improves**.\n* **Large $W_{\\text{clk}}$:** Output node self-loading (drain capacitance) and clock-edge degradation dominate $\\rightarrow$ **Speed degrades**.\n* **Design Rule:** The maximum speed is achieved when the clocked transistors are sized comparably to the input transistors ($W_{\\text{clk}} \\approx W_1$). Beyond this point, any further increase in width will degrade the speed.",
        "format": "markdown",
        "sha256": "1b5920c1251d655ae94b97dc484f4269f4502a60dd2220f454e71f709f424823"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening the clocked transistors initially improves speed by lowering their on-resistance, while added capacitance at the latch nodes eventually limits or reverses the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 8074,
        "total_tokens": 9171,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 8074,
        "total_tokens": 9171,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, the structure provides **quadrature outputs** (specifically between nodes $X$ and $Y$, or $X$ and $Z$), provided that the input clock $CK$ has a **50% duty cycle**.\n\n---\n\n### **1. Circuit Identification and Operation**\nThe circuit consists of:\n1. **Master Stage (Left):** A clocked CMOS ($\\text{C}^2\\text{MOS}$) inverter that evaluates when $CK = 1$ ($\\overline{CK} = 0$) and holds dynamically when $CK = 0$.\n2. **Slave Stage (Middle):** A $\\text{C}^2\\text{MOS}$ inverter that evaluates when $CK = 0$ ($\\overline{CK} = 1$) and holds dynamically when $CK = 1$.\n3. **Feedback Inverter ($\\text{Inv}_3$):** A static inverter closing the loop with negative feedback ($Z = \\overline{Y}$).\n\nBecause the loop contains an odd number of inversions ($3$ inverting stages) across two alternating master-slave latches, it functions as a **toggle flip-flop (divide-by-2 frequency divider)**.\n\n---\n\n### **2. Timing and Phase Analysis**\n\nLet the clock period be $T_{CK}$ with a 50% duty cycle. The output frequency is halved, meaning the output period is:\n$$T_{\\text{out}} = 2 T_{CK}$$\n\n* **When $CK = 1$ (Rising edge of $CK$):**\n  * The first stage is **transparent**: Node $X$ evaluates to $\\overline{Z}$.\n  * The second stage is in **hold mode**: Node $Y$ holds its previous state, keeping $Z = \\overline{Y}$ constant.\n  * Transitions at node $X$ occur at the **rising edges** of $CK$.\n\n* **When $CK = 0$ (Falling edge of $CK$):**\n  * The first stage enters **hold mode**: Node $X$ floats and holds its charge.\n  * The second stage is **transparent**: Node $Y$ evaluates to $\\overline{X}$, which immediately propagates to $Z = \\overline{Y} = X$.\n  * Transitions at nodes $Y$ and $Z$ occur at the **falling edges** of $CK$.\n\n---\n\n### **3. Quadrature Relationship**\n\nThe time shift ($\\Delta t$) between transitions at node $X$ and transitions at node $Y$ (or $Z$) is equal to half a clock cycle:\n$$\\Delta t = \\frac{T_{CK}}{2} = \\frac{T_{\\text{out}}}{4}$$\n\nExpressed as a phase shift at the output frequency $f_{\\text{out}}$:\n$$\\Delta \\theta = \\frac{\\Delta t}{T_{\\text{out}}} \\times 360^\\circ = \\frac{T_{CK}/2}{2T_{CK}} \\times 360^\\circ = 90^\\circ$$\n\nThus, the signals at nodes **$X$ and $Z$** (or **$X$ and $Y$**) are in **quadrature ($90^\\circ$ phase shift)** relative to each other.\n\n---\n\n### **4. Practical Considerations**\n* **Duty Cycle Sensitivity:** The exact $90^\\circ$ phase shift strictly depends on a $50\\%$ clock duty cycle. Any duty-cycle distortion directly causes quadrature phase error.\n* **Dynamic Nodes:** Nodes $X$ and $Y$ are dynamic (floating during their hold states). In practice, buffering is needed at these nodes to prevent charge sharing and leakage from degrading the output levels.",
        "format": "markdown",
        "sha256": "3b5ebf0d50e56aac5b93e1def4701456b0c0d95dfd2550377657078f2ad932bd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the divide-by-two operation and the nominal half-period timing that gives quadrature. But it implies quadrature is exact with a 50% duty-cycle clock and misses the key nonidealities: Inv3 delay and unequal latch-output loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 5701,
        "total_tokens": 6784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 5701,
        "total_tokens": 6784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, the structure provides **quadrature outputs**. \n\n---\n\n### **Detailed Analysis and Operation**\n\n#### 1. **Circuit Identification**\nThe circuit is a **dynamic divide-by-2 frequency divider** (Johnson counter / toggle flip-flop) realized using two clocked CMOS ($\\text{C}^2\\text{MOS}$) latches and a static inverter ($\\text{Inv}_3$) connected in a negative feedback loop:\n* **Stage 1 (Master Latch):** Clocked by $CK$ and $\\overline{CK}$. It samples the feedback signal $Z$ when $CK = 1$ and holds its value dynamically on node $X$ when $CK = 0$.\n* **Stage 2 (Slave Latch):** Clocked by the complementary phases ($\\overline{CK}$ and $CK$). It samples node $X$ when $CK = 0$ and holds its value dynamically on node $Y$ when $CK = 1$.\n* **Stage 3 ($\\text{Inv}_3$):** A static inverter that produces $Z = \\overline{Y}$.\n\n---\n\n#### 2. **Divide-by-2 Operation**\nBecause there are three signal inversions in the loop (an odd number of inversions), the circuit toggles its state on every clock cycle:\n* When $CK = 1$: Stage 1 is transparent $\\implies X = \\overline{Z}$, while Stage 2 holds.\n* When $CK = 0$: Stage 1 holds, Stage 2 is transparent $\\implies Y = \\overline{X}$, and $\\text{Inv}_3$ produces $Z = \\overline{Y} = X$.\n\nThus, one full cycle of the output takes two full clock cycles ($T_{\\text{out}} = 2 T_{CK}$), meaning the circuit divides the clock frequency by 2:\n$$f_{\\text{out}} = \\frac{f_{CK}}{2}$$\n\n---\n\n#### 3. **Quadrature Generation ($90^\\circ$ Phase Shift)**\nAssuming a $50\\%$ duty cycle clock of period $T_{CK}$:\n1. **Node $X$** updates on the **rising edges** of $CK$.\n2. **Nodes $Y$ and $Z$** update on the **falling edges** of $CK$, which occur $T_{CK}/2$ after the rising edges.\n\nThe time shift between node $X$ and nodes $Y/Z$ is:\n$$\\Delta t = \\frac{T_{CK}}{2}$$\n\nExpressed as a phase shift relative to the output period $T_{\\text{out}} = 2T_{CK}$:\n$$\\Delta \\theta = \\frac{\\Delta t}{T_{\\text{out}}} \\times 360^\\circ = \\frac{T_{CK}/2}{2T_{CK}} \\times 360^\\circ = 90^\\circ$$\n\n---\n\n### **Summary of Output Phases**\nTaking node $X$ as the reference:\n* **Node $X$:** $0^\\circ$ (In-phase, $I$)\n* **Node $Z$:** $90^\\circ$ (Quadrature, $Q$)\n* **Node $Y$:** $270^\\circ$ (or $-90^\\circ$, $\\overline{Q}$)\n\nTherefore, nodes **$X$ and $Z$** (as well as **$X$ and $Y$**) are in exact quadrature ($90^\\circ$ out of phase).",
        "format": "markdown",
        "sha256": "8a02b218c5785ce030d480aa682a2c12ae078197268d243bce70b54035ab993a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the nominal divide-by-two operation and the ideal 90° phase spacing, but incorrectly calls the outputs exact quadrature and omits the Inv3 delay and unequal latch loading that make the phases nonideal.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 5933,
        "total_tokens": 7016,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 5933,
        "total_tokens": 7016,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the structure provides quadrature outputs.**\n\n---\n\n### **1. Circuit Identification and Operation**\nThe circuit is a **$\\text{C}^2\\text{MOS}$ (Clocked CMOS) Master-Slave D-Flip-Flop** configured in negative feedback to act as a **divide-by-2 frequency divider**:\n\n* **Master Stage (Node $X$):** A clocked inverter that is **transparent** when $CK = 1$ ($\\overline{CK} = 0$) and holds its state dynamically when $CK = 0$.\n* **Slave Stage (Node $Y$):** A clocked inverter that is **transparent** when $CK = 0$ ($\\overline{CK} = 1$) and holds its state dynamically when $CK = 1$.\n* **Feedback Inverter ($\\text{Inv}_3$, Node $Z$):** Computes $Z = \\overline{Y}$ and feeds it back to the input of the master stage.\n\n---\n\n### **2. State Tracking Over One Full Period ($T_{\\text{out}} = 2T_{CK}$)**\n\nAssuming an input clock $CK$ with period $T_{CK}$ (and 50% duty cycle):\n\n| Time Interval | $CK$ | Master State | Slave State | Node $X$ | Node $Y$ | Node $Z = \\overline{Y}$ |\n| :--- | :---: | :---: | :---: | :---: | :---: | :---: |\n| $t \\in [0, \\; T_{CK}/2]$ | **$1$** | Evaluates ($X = \\overline{Z}$) | Holds | **$1$** | **$1$** | **$0$** |\n| $t \\in [T_{CK}/2, \\; T_{CK}]$ | **$0$** | Holds | Evaluates ($Y = \\overline{X}$) | **$1$** | **$0$** | **$1$** |\n| $t \\in [T_{CK}, \\; 3T_{CK}/2]$ | **$1$** | Evaluates ($X = \\overline{Z}$) | Holds | **$0$** | **$0$** | **$1$** |\n| $t \\in [3T_{CK}/2, \\; 2T_{CK}]$ | **$0$** | Holds | Evaluates ($Y = \\overline{X}$) | **$0$** | **$1$** | **$0$** |\n\n---\n\n### **3. Phase Relationship (Quadrature Generation)**\n\n1. **Output Frequency:** The signals at nodes $X$, $Y$, and $Z$ have an output period of $T_{\\text{out}} = 2T_{CK}$ (frequency $f_{\\text{out}} = f_{CK}/2$) and a $50\\%$ duty cycle.\n2. **Transition Timing:**\n   * Transitions at node **$X$** occur on the **rising edges** of $CK$.\n   * Transitions at nodes **$Y$** and **$Z$** occur on the **falling edges** of $CK$.\n3. **Phase Shift:**\n   The delay between transitions of $X$ and $Y$ (or $Z$) is $\\Delta t = \\frac{T_{CK}}{2}$. \n   Relative to the output period $T_{\\text{out}} = 2T_{CK}$, the phase difference is:\n   $$\\Delta \\Phi = \\frac{\\Delta t}{T_{\\text{out}}} \\times 360^\\circ = \\frac{T_{CK}/2}{2T_{CK}} \\times 360^\\circ = 90^\\circ$$\n\n### **Conclusion**\nThe output signals **$X$** and **$Y$** (or **$X$** and **$Z$**) are shifted by exactly **$90^\\circ$** with respect to each other at frequency $f_{CK}/2$, thus providing **quadrature (I/Q) outputs**.",
        "format": "markdown",
        "sha256": "cb29a92ce6eda141745def63e94e9bb1f208092a9d5f1cda4dc64e1de3b0b688"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the divide-by-two operation and ideal 90° phase relationship, but claims exact quadrature and omits both practical departures: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 4773,
        "total_tokens": 5856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3891,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 4773,
        "total_tokens": 5856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3891,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The speed of the circuit **improves** when the widths of the clocked transistors are increased.\n\n---\n\n### **Detailed Explanation:**\n\n1. **Circuit Architecture:**\n   The circuit is a **$\\text{C}^2\\text{MOS}$ (Clocked CMOS) Master-Slave D-Flip-Flop** configured in negative feedback with an inverter to form a **toggle flip-flop (divide-by-2 frequency divider)**.\n\n2. **Reduction in Path Resistance:**\n   * During the active (transparent) phase of each stage, charging or discharging of the output node occurs through a series combination of two transistors: one **data transistor** and one **clocked transistor**.\n   * Increasing the width ($W_{ck}$) of the clocked transistors lowers their ON-resistance ($R_{on,ck} \\propto 1/W_{ck}$), allowing larger drive currents to charge and discharge the output nodes faster.\n\n3. **Placement of Clocked Transistors (Capacitance Shielding):**\n   * The clocked transistors are placed on the **outside** (connected directly to the supply rails $V_{DD}$ and Ground), while the data transistors are on the **inside** (connected directly to the output nodes).\n   * Because the data transistors isolate the clocked transistors from the output nodes, increasing $W_{ck}$ **does not increase the capacitance at the critical output nodes**. The load capacitance at each output node is determined almost entirely by the drain junctions of the inner data transistors and the input gate capacitances of the following stage.\n\n4. **Conclusion:**\n   Since the total driving resistance of the pull-up and pull-down paths decreases while the output node capacitance remains virtually unchanged, the $RC$ propagation delay decreases. Therefore, the maximum operating frequency (speed) **improves**.",
        "format": "markdown",
        "sha256": "d1650b1793ba4eab5cc1ac6fd60605b5f432b28588a296af44e2859622078743"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer correctly concludes that wider clocked transistors improve speed by reducing on-resistance while adding little capacitance to the output nodes. It omits charge sharing and its effect on swing, so it does not meet the full-credit rule.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 4107,
        "total_tokens": 5211,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3730,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 4107,
        "total_tokens": 5211,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3730,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Answer:**\nThe speed of the circuit **improves** (i.e., propagation delay decreases and maximum toggle frequency increases).\n\n---\n\n### **Detailed Analysis:**\n\n#### 1. **Circuit Identification**\nThe circuit is a **$\\text{C}^2\\text{MOS}$ (Clocked CMOS) Master-Slave D-Flip-Flop** configured as a **divide-by-2 frequency divider** (toggle flip-flop):\n* **Stage 1 (Master latch):** Enabled when $CK = 1$ ($\\overline{CK} = 0$) and holds when $CK = 0$.\n* **Stage 2 (Slave latch):** Enabled when $CK = 0$ ($\\overline{CK} = 1$) and holds when $CK = 1$.\n* **Inverter:** Provides negative feedback ($\\bar{Q} \\to D$) to create the toggle/divide-by-2 function.\n\n---\n\n#### 2. **Transistor Placement (Outer vs. Inner)**\n* The **clocked transistors** are placed at the **outer positions** connected directly to the power rails ($V_{DD}$ and $\\text{GND}$).\n* The **data (input) transistors** are placed at the **inner positions** connected directly to the output nodes of each latch stage.\n\n---\n\n#### 3. **Effect of Increasing Widths of the Clocked Transistors ($W_{\\text{clk}}$)**\n\n1. **Reduction in Series Resistance:**\n   The on-resistance of the clocked transistors decreases inversely with their width:\n   $$R_{\\text{on,clk}} \\propto \\frac{1}{W_{\\text{clk}}}$$\n   When a stage evaluates, the total pull-up (or pull-down) resistance is the series combination of the data transistor and the clocked transistor:\n   $$R_{\\text{total}} = R_{\\text{on,data}} + R_{\\text{on,clk}}$$\n   Increasing $W_{\\text{clk}}$ reduces $R_{\\text{on,clk}}$, lowering the total series resistance $R_{\\text{total}}$.\n\n2. **Output Capacitance Isolation:**\n   The load capacitance at the output node of each stage ($C_{\\text{out}}$) consists of:\n   $$C_{\\text{out}} = C_{db,\\text{data,P}} + C_{db,\\text{data,N}} + C_{\\text{gate,next}}$$\n   Because the clocked transistors are at the outer ends (connected to the rails), their drain/source junction capacitances are located at the **internal intermediate nodes**, not directly on the critical output nodes. Therefore, increasing $W_{\\text{clk}}$ **does not increase the capacitance at the output node**.\n\n3. **Output Delay / Time Constant:**\n   The propagation delay associated with charging/discharging the output node is approximately:\n   $$\\tau_{\\text{out}} \\approx (R_{\\text{on,data}} + R_{\\text{on,clk}}) C_{\\text{out}}$$\n   Since $R_{\\text{on,clk}}$ decreases while $C_{\\text{out}}$ remains virtually constant, $\\tau_{\\text{out}}$ decreases, resulting in **faster transitions and higher speed**.\n\n4. **Internal Node Behavior:**\n   The capacitance at the intermediate node is $C_{\\text{int}} \\approx C_{d,\\text{clk}} + C_{s,\\text{data}} \\propto W_{\\text{clk}}$. The associated local time constant is:\n   $$\\tau_{\\text{int}} \\approx R_{\\text{on,clk}} C_{\\text{int}} \\propto \\left(\\frac{1}{W_{\\text{clk}}}\\right)(W_{\\text{clk}}) \\approx \\text{constant}$$\n   Thus, sizing up the clocked transistors does not slow down the intermediate node.\n\n---\n\n### **Conclusion:**\nBecause sizing up the outer clocked transistors reduces the series pull-up/pull-down resistance without adding capacitive load to the output nodes, the **speed improves**. \n\n*(Note: In a complete system with a non-ideal clock driver, increasing $W_{\\text{clk}}$ excessively will eventually increase the capacitive load on the clock distribution lines, but from the intrinsic perspective of the latch, the speed improves.)*",
        "format": "markdown",
        "sha256": "98b9b474e78240f3dde7f4eb01d9d2e98e9382a9ebaa21c200ace2b3f5e76d67"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed by reducing series resistance while adding little output loading. It omits charge sharing, which degrades the swing and limits the benefit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 6435,
        "total_tokens": 7539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5527,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 6435,
        "total_tokens": 7539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5527,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown in the figure, the speed (maximum operating frequency) **improves** if we increase the widths of the clocked transistors (assuming the clock is driven by an ideal or sufficiently strong clock source).\n\n---\n\n### **Detailed Analysis**\n\n#### **1. Circuit Identification**\nThe circuit is a **dynamic $C^2\\text{MOS}$ frequency divider** (a toggle flip-flop configured to divide by 2):\n* **Stage 1 (Master):** A $C^2\\text{MOS}$ clocked inverter enabled when $CK = 1$ ($\\overline{CK} = 0$).\n* **Stage 2 (Slave):** A $C^2\\text{MOS}$ clocked inverter enabled when $CK = 0$ ($\\overline{CK} = 1$).\n* **Feedback Inverter:** A static CMOS inverter providing an odd number of inversions in the loop so that the state toggles every full clock cycle.\n\nIn both $C^2\\text{MOS}$ stages, the **clocked transistors are placed on the outside** (connected directly to the supply rails $V_{DD}$ and ground), while the **data/input transistors are placed on the inside** (connected to the output nodes).\n\n---\n\n#### **2. Why Speed Improves**\n\n1. **Reduction in On-Resistance ($R_{on}$):**\n   Widening the clocked transistors directly reduces their on-resistance:\n   $$R_{on,ck} \\propto \\frac{1}{W_{ck}}$$\n   During the evaluation phase of each stage, the charging and discharging currents through the pull-up and pull-down branches increase, which accelerates the transitions.\n\n2. **No Additional Capacitive Loading on the Data Path:**\n   In standard logic gates, increasing transistor width increases the gate capacitance, thereby loading the preceding stage and potentially slowing it down. Here, however:\n   * The gates of the clocked transistors are driven by the **clock lines** ($CK$ and $\\overline{CK}$), not by the data path.\n   * Therefore, increasing $W_{ck}$ **does not** increase the load capacitance seen by the inverter or either $C^2\\text{MOS}$ stage.\n\n3. **Output Node Capacitances Remain Unchanged:**\n   Because the clocked transistors are located at the rails (outside), their drain capacitances reside at the **internal intermediate nodes** rather than the stage output nodes. \n   * The output node capacitance $C_{out}$ of each stage is determined only by the drain capacitances of the inner (data) transistors and the gate capacitances of the subsequent stage.\n   * Widening the clocked transistors leaves $C_{out}$ virtually unchanged.\n\n4. **Elmore Delay Analysis:**\n   For a pull-down network consisting of a clocked NMOS ($W_{ck}$) at ground and an input NMOS ($W_{in}$) at the output:\n   $$\\tau \\approx R_{ck} C_{int} + (R_{ck} + R_{in}) C_{out}$$\n   where $C_{int} = C_{db,ck} + C_{sb,in} \\approx c_1 W_{ck} + C_0$, and $R_{ck} \\approx \\frac{k}{W_{ck}}$:\n   $$\\tau \\approx k c_1 + \\frac{k(C_0 + C_{out})}{W_{ck}} + R_{in} C_{out}$$\n   As $W_{ck}$ increases, the term $\\frac{k(C_0 + C_{out})}{W_{ck}}$ **decreases monotonically**, reducing the stage delay and increasing the maximum clock frequency.\n\n5. **Reduced Body Effect on Inner Transistors:**\n   A smaller $R_{on,ck}$ brings the intermediate source nodes of the inner input transistors closer to $V_{DD}$ and ground during conduction. This decreases their source-to-body voltage $|V_{SB}|$, mitigating the body effect ($V_{TH}$ does not rise as much) and increasing their gate overdrive $|V_{GS}| - V_{TH}$, which further speeds up the circuit.\n\n---\n\n### **Practical Caveat**\nIf the clock generator has a **finite output impedance** (e.g., driven by a small on-chip clock buffer):\n* Widening the clocked transistors increases the capacitive load on the clock distribution network ($C_{gate} \\propto W_{ck}$).\n* This can degrade the clock edge rates (slower rise/fall times), which would eventually degrade the divider's maximum speed if $W_{ck}$ is made excessively large. \n\nHowever, under standard circuit analysis where the clock is an ideal input, the speed **unambiguously improves**.",
        "format": "markdown",
        "sha256": "3db484e49710c1d77db847e5218c42c1612429155d6e2269f7052eb145dcb925"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly concludes that widening the outer clocked transistors improves speed by reducing their series resistance with little output loading. However, it omits charge sharing and its swing degradation as a limitation, so it does not meet the full-credit rule.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1105,
        "output_tokens": 29770,
        "total_tokens": 30875,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1105,
        "output_tokens": 29770,
        "total_tokens": 30875,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **1. Overview and Circuit Identification**\n\nThe given circuit is a **dynamic frequency divider (Divide-by-2 circuit)** based on a master-slave configuration with negative feedback. \n\nIt is constructed using:\n* **Three inverters** ($\\text{Inv}_1, \\text{Inv}_2, \\text{Inv}_3$) providing an odd number of inversions (total of $3$).\n* **Two transmission switches** controlled by complementary clock phases ($CK$ and $\\overline{CK}$).\n\nBecause the total loop has an odd number of inversions, connecting the output back to the input creates negative feedback ($D = \\overline{Q}$). The two-phase clocked switches create a **Master-Slave Dynamic D-Flip-Flop** configured as a **toggle flip-flop (T-FF)**, dividing the input clock frequency by 2:\n$$f_{\\text{out}} = \\frac{f_{CK}}{2}$$\n\n---\n\n### **2. Circuit Breakdown**\n\nThe circuit can be partitioned into two cascaded dynamic latch stages:\n\n1. **Master Stage:**\n   * Formed by **Switch $CK$** and **$\\text{Inv}_1$**.\n   * Transparent when $CK = 1$; in hold mode when $CK = 0$.\n\n2. **Slave Stage:**\n   * Formed by **Switch $\\overline{CK}$**, **$\\text{Inv}_2$**, and **$\\text{Inv}_3$**.\n   * Transparent when $\\overline{CK} = 1$ ($CK = 0$); in hold mode when $\\overline{CK} = 0$ ($CK = 1$).\n   * Provides non-inverting buffer action (2 inverters) between the slave switch and the output.\n\n---\n\n### **3. Principle of Operation**\n\nLet the logic levels at the outputs of the inverters be $V_1$, $V_2$, and $V_3$ (where $V_3$ is the final output fed back to the input switch).\n\n```\n        CK               Inv1           CK_bar            Inv2            Inv3\n--->o--/  --o---> [ >o- ] --->o---/  --o---> [ >o- ] ---> [ >o- ] ---+---> V_out (V_3)\n    |                                                                |\n    +----------------------------------------------------------------+\n```\n\n#### **Phase 1: $CK = 1$ ($\\overline{CK} = 0$) [Sampling / Master Track]**\n* **Switch $CK$ is CLOSED (ON)**, and **Switch $\\overline{CK}$ is OPEN (OFF)**.\n* $\\text{Inv}_1$ samples the output state $V_3^{(n)}$:\n  $$V_1 = \\overline{V_3^{(n)}}$$\n* The input of $\\text{Inv}_2$ is isolated and retains its previous charge on its parasitic input capacitance ($C_{in,2}$).\n* Consequently, the slave stage maintains its existing output state:\n  $$V_3 = V_3^{(n)} \\quad (\\text{held constant})$$\n\n#### **Phase 2: $CK = 0$ ($\\overline{CK} = 1$) [Evaluation / Slave Track]**\n* **Switch $CK$ is OPEN (OFF)**, and **Switch $\\overline{CK}$ is CLOSED (ON)**.\n* The input of $\\text{Inv}_1$ floats, holding the previous state on its input gate capacitance ($C_{in,1}$).\n* The inverted value $V_1 = \\overline{V_3^{(n)}}$ passes through Switch $\\overline{CK}$ to the input of $\\text{Inv}_2$.\n* The signal propagates through $\\text{Inv}_2$ and $\\text{Inv}_3$ (which together provide two inversions):\n  $$V_3^{(n+1)} = \\overline{\\overline{V_1}} = V_1 = \\overline{V_3^{(n)}}$$\n* Thus, the output state $V_3$ **toggles (inverts)** to $\\overline{V_3^{(n)}}$.\n\n---\n\n### **4. Frequency Division ($\\div 2$)**\n\n* In **one clock period** ($T_{CK}$), the output $V_3$ changes state **once** (e.g., from `0` to `1` or `1` to `0`).\n* To complete one full output cycle (`0` $\\rightarrow$ `1` $\\rightarrow$ `0`), it requires **two full clock cycles**:\n  $$T_{\\text{out}} = 2 \\cdot T_{CK}$$\n  $$f_{\\text{out}} = \\frac{1}{2} f_{CK}$$\n\n---\n\n### **5. Practical Considerations & Non-Idealities**\n\n1. **Dynamic Storage & Minimum Clock Frequency ($f_{\\min}$):**\n   * The circuit relies on the parasitic gate capacitance of the MOS inverters to dynamically hold logic levels when a switch is open.\n   * Due to subthreshold leakage and junction leakage currents, the stored charge will degrade over time. Therefore, there is a **minimum clock frequency** below which the circuit fails.\n\n2. **Non-Overlapping Clocks:**\n   * If both switches were to be closed simultaneously (clock overlap where $CK = \\overline{CK} = 1$), a direct closed loop through all 3 inverters would be formed. This would cause the circuit to enter an uncontrolled ring oscillation rather than orderly division. Non-overlapping clock generation is required.\n\n3. **Charge Injection and Clock Feedthrough:**\n   * Switching MOS transistors inject channel charge into the dynamic nodes, causing voltage offsets that must be kept small enough to maintain adequate noise margins.",
        "format": "markdown",
        "sha256": "4cf53598b163b9a7698ca4e6b66275cc04e5a84f320097571c11fdca3dff4b9a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic-latch divide-by-two and explains that its output runs at half the clock frequency. The additional internal-path and nonideality discussion is not essential to the answer.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 3730,
        "total_tokens": 4829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 3730,
        "total_tokens": 4829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its topology, operation, function, and design trade-offs:\n\n---\n\n### 1. Circuit Identification and Overview\nThis circuit is a **dynamic divide-by-2 frequency divider** (also known as a **dynamic toggle flip-flop** or a **clocked 3-stage ring oscillator**). \n\nIt consists of:\n* **Three inverters** connected in a closed ring (an odd number provides a net negative feedback / inversion of $\\text{Total Inversion} = -1$).\n* **Two clock-controlled switches**:\n  * One switch controlled by clock signal $CK$ at the input of $\\text{Inv}_1$.\n  * One switch controlled by the complementary clock $\\overline{CK}$ between $\\text{Inv}_1$ and $\\text{Inv}_2$.\n* **Parasitic input capacitances** of the inverters, which act as temporary dynamic storage nodes (capacitive memory).\n\n---\n\n### 2. Principle of Operation\n\nThe circuit operates in two distinct phases depending on the clock state:\n\n#### **Phase 1: $CK = \\text{High}$ ($\\overline{CK} = \\text{Low}$)** — *Sample State of Loop*\n* **Switch $CK$ is CLOSED (ON)**; **Switch $\\overline{CK}$ is OPEN (OFF)**.\n* The output of the third inverter, $V_{\\text{out3}}$, is passed to the input of $\\text{Inv}_1$.\n* $\\text{Inv}_1$ evaluates and drives its output node to:\n  $$V_{\\text{out1}} = \\overline{V_{\\text{out3}}}$$\n* Because the second switch ($\\overline{CK}$) is open, the input to $\\text{Inv}_2$ is isolated. It holds its previous value dynamically on its gate capacitance.\n* Consequently, the states of $\\text{Inv}_2$ and $\\text{Inv}_3$ remain stable during this phase.\n\n#### **Phase 2: $CK = \\text{Low}$ ($\\overline{CK} = \\text{High}$)** — *Propagate Inversion*\n* **Switch $CK$ is OPEN (OFF)**; **Switch $\\overline{CK}$ is CLOSED (ON)**.\n* The input of $\\text{Inv}_1$ floats and retains its sampled charge, keeping $V_{\\text{out1}} = \\overline{V_{\\text{out3}}(\\text{previous})}$.\n* The second switch closes, transferring $V_{\\text{out1}}$ to the input of $\\text{Inv}_2$.\n* The signal propagates through $\\text{Inv}_2$ and $\\text{Inv}_3$:\n  * $\\text{Input of Inv}_2 = \\overline{V_{\\text{out3}}(\\text{previous})}$\n  * $\\text{Output of Inv}_2 = V_{\\text{out3}}(\\text{previous})$\n  * $\\text{Output of Inv}_3 = \\overline{V_{\\text{out3}}(\\text{previous})}$\n* The output of $\\text{Inv}_3$ has now **toggled** to the opposite logic state.\n* Because Switch $CK$ is open, the feedback loop is interrupted, preventing continuous ring oscillation.\n\n---\n\n### 3. Input/Output Timing Relationship\n* **Per Half-Cycle:** The data advances through one section of the loop.\n* **Per Full Clock Period ($T_{CK}$):** The output node toggles once (one state transition: $0 \\to 1$ or $1 \\to 0$).\n* **Output Period:** It takes two full clock cycles for the output to return to its initial state ($0 \\to 1 \\to 0$):\n  $$T_{\\text{out}} = 2 \\cdot T_{CK} \\implies f_{\\text{out}} = \\frac{f_{CK}}{2}$$\n\nThus, it functions strictly as a **frequency divider by 2**.\n\n---\n\n### 4. Key Advantages\n1. **Low Transistor Count:** Requires only 3 inverters and 2 pass-gates (as few as 8 to 10 transistors), making it far more compact than a static Master-Slave D-Flip-Flop divider.\n2. **High-Speed Operation:** Very low internal node loading allows it to operate at extremely high frequencies (often used in RF/PLL prescalers).\n3. **Low Power Consumption:** Minimal switching capacitance compared to fully static logic.\n\n---\n\n### 5. Design Considerations and Limitations\n* **Minimum Frequency Limit ($f_{\\text{min}}$):** Because storage relies on charge stored on gate capacitances, leakage currents (subthreshold and gate leakage) will degrade the logic levels if the clock frequency is too low.\n* **Clock Overlap (Race Condition):** If $CK$ and $\\overline{CK}$ are high simultaneously due to clock skew/overlap, the loop closes completely and will act as an uncontrolled, free-running **3-stage ring oscillator**.\n* **Clock Feedthrough and Charge Injection:** Switching transitions can inject charge into the floating nodes, potentially causing logic errors if the storage capacitance is too small.",
        "format": "markdown",
        "sha256": "33ac86de528156f0bc52e9cb82a6112bb6a527ae44f8eb821e52b92237623357"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic divide-by-two circuit and explains that stored charge supports alternating clocked operation, yielding an output at half the clock frequency. The extra topology and design details are not needed for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 3559,
        "total_tokens": 4658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2455,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 3559,
        "total_tokens": 4658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2455,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Identification and Overview\n\nThe given circuit is a **dynamic master-slave toggle flip-flop** configured as a **divide-by-2 frequency divider** ($\\div 2$). \n\nIt consists of:\n* **Three inverters** connected in a ring (providing an overall odd parity of inversions, i.e., net negative feedback).\n* **Two clocked switches** controlled by complementary clock phases ($CK$ and $\\overline{CK}$).\n* **Dynamic storage nodes** (the parasitic/gate capacitances at the inputs of the inverters).\n\n---\n\n### 2. Operating Principle and Architecture\n\nThe circuit is divided into two cascaded dynamic latch stages:\n\n1. **Master Stage (Inverting):** \n   * Formed by switch $CK$ and the first inverter ($\\text{Inv}_1$).\n   * When $CK$ is high, it samples the output voltage ($V_{out}$) from the third inverter and inverts it at the output of $\\text{Inv}_1$.\n\n2. **Slave Stage (Non-Inverting):** \n   * Formed by switch $\\overline{CK}$ and the cascade of the second and third inverters ($\\text{Inv}_2$ and $\\text{Inv}_3$).\n   * Two inverters in series act as a non-inverting buffer. When $\\overline{CK}$ is high ($CK$ is low), this stage samples the output of $\\text{Inv}_1$ and drives the output node $V_{out}$.\n\n---\n\n### 3. Step-by-Step Operation (State Analysis)\n\nLet $V_{out}$ be the output of the third inverter. Assume an initial state where $V_{out} = \\text{Low } (0)$.\n\n```\n   CK = 1               CK = 0               CK = 1               CK = 0\n (Phase 1)            (Phase 2)            (Phase 3)            (Phase 4)\n------------         ------------         ------------         ------------\nVout = 0             Vout -> 1            Vout = 1             Vout -> 0\nInv1 out -> 1        Inv1 holds 1         Inv1 out -> 0        Inv1 holds 0\nInv2 holds 0         Inv2 in <- 1         Inv2 holds 1         Inv2 in <- 0\n```\n\n#### **Clock Cycle 1:**\n* **Phase 1 ($CK = 1, \\overline{CK} = 0$):**\n  * Switch $CK$ is **CLOSED** (ON); switch $\\overline{CK}$ is **OPEN** (OFF).\n  * The input of $\\text{Inv}_1$ is charged to $V_{out} = 0$, so its output evaluates to **$1$**.\n  * Since switch $\\overline{CK}$ is open, the input capacitance of $\\text{Inv}_2$ holds its previous state ($0$), maintaining $V_{out} = 0$.\n\n* **Phase 2 ($CK = 0, \\overline{CK} = 1$):**\n  * Switch $CK$ is **OPEN**; switch $\\overline{CK}$ is **CLOSED**.\n  * The input to $\\text{Inv}_1$ floats and dynamic charge holds its output at **$1$**.\n  * The output of $\\text{Inv}_1$ ($1$) passes through switch $\\overline{CK}$ to $\\text{Inv}_2$.\n  * $\\text{Inv}_2$ outputs $0 \\implies \\text{Inv}_3$ outputs **$1$**.\n  * **Result:** $V_{out}$ toggles from **$0 \\to 1$**.\n\n---\n\n#### **Clock Cycle 2:**\n* **Phase 3 ($CK = 1, \\overline{CK} = 0$):**\n  * Switch $CK$ closes; switch $\\overline{CK}$ opens.\n  * The input of $\\text{Inv}_1$ samples the new output $V_{out} = 1$, driving the output of $\\text{Inv}_1$ to **$0$**.\n  * The slave stage holds $V_{out} = 1$.\n\n* **Phase 4 ($CK = 0, \\overline{CK} = 1$):**\n  * Switch $CK$ opens; switch $\\overline{CK}$ closes.\n  * The $0$ from $\\text{Inv}_1$ transfers to $\\text{Inv}_2$.\n  * $\\text{Inv}_2$ outputs $1 \\implies \\text{Inv}_3$ outputs **$0$**.\n  * **Result:** $V_{out}$ toggles back from **$1 \\to 0$**.\n\n---\n\n### 4. Frequency Relationship\n\n* The output transitions once per clock cycle (on the falling edge of $CK$).\n* A complete period of the output signal ($0 \\to 1 \\to 0$) requires **two full periods** of the clock:\n  $$T_{out} = 2 \\cdot T_{CK} \\implies f_{out} = \\frac{f_{CK}}{2}$$\n\n---\n\n### 5. Key Design and Practical Considerations\n\n1. **Dynamic Logic Limitation (Minimum Frequency):**\n   * The circuit relies on the parasitic gate capacitance of the inverters to retain charge during the holding phases. Due to subthreshold and junction leakage currents, there is a **minimum clock frequency** below which data is lost.\n2. **Clock Overlap (Race Conditions):**\n   * Non-overlapping clock signals ($CK$ and $\\overline{CK}$) are required. If both switches are simultaneously closed, the loop forms an unstable 3-stage ring oscillator, causing race-through and unpredictable logic states.\n3. **Hardware Efficiency:**\n   * This structure is extremely compact compared to static CMOS dividers because it requires only 3 inverters and 2 transmission gates (a total of 10 transistors).",
        "format": "markdown",
        "sha256": "035d6b751d7afcfaf6e848c4def68bb9b166c82601d3234bf4ce500077ca65fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic-latch divide-by-two and explains that the output frequency is half the clock frequency, satisfying the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 3807,
        "total_tokens": 4906,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2530,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 3807,
        "total_tokens": 4906,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2530,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **dynamic master-slave flip-flop** configured in negative feedback to act as a **$\\div 2$ frequency divider** (or toggle flip-flop). The red inverter is connected in parallel with the master sampling path (switch $CK$ and $\\text{Inv}_1$).\n\nThe addition of the red inverter affects the performance in the following ways:\n\n---\n\n### 1. **Increases the Maximum Operating Frequency ($f_{max}$)**\n* **Assisting Drive Strength:** When $CK$ is high, both the main path ($\\text{Inv}_1$) and the red inverter are driven by the same feedback node and drive the same internal node. Because both provide an inversion without logic contention, they act in parallel, increasing the effective transconductance ($G_m$) and drive strength. This reduces the RC propagation delay and sharpens edge transitions.\n* **Feedforward / Predictive Action:** The red inverter bypasses the $CK$ switch entirely. As soon as the output of the final inverter changes, the red inverter immediately begins pulling the master output node in the correct direction, allowing the divider to operate much faster and extending $f_{max}$.\n\n---\n\n### 2. **Sets a Minimum Operating Frequency ($f_{min}$) / Loss of Low-Frequency Operation**\n* **Creation of a Ring Oscillator:** When $\\overline{CK}$ is high (and $CK$ is low), the slave switch is closed. A closed loop is formed through:\n  $$\\text{Red Inverter} \\longrightarrow \\overline{CK}\\text{ switch} \\longrightarrow \\text{Inverter 2} \\longrightarrow \\text{Inverter 3} \\longrightarrow \\text{Red Inverter}$$\n  This loop contains **3 inverting stages**, which forms a free-running **3-stage ring oscillator**.\n* **Failure at Low Frequencies:** If the clock frequency is low, $\\overline{CK}$ remains high long enough for the 3-stage loop to undergo uncontrolled oscillations during that half-cycle, corrupting the divided output. Consequently, the circuit cannot function at low frequencies or DC and is restricted to high-frequency operation.\n\n---\n\n### 3. **Behavioral Shift to an Injection-Locked / Regenerative Divider**\n* By adding the red inverter, the divider transitions from a purely digital master-slave frequency divider to a **Miller / injection-locked regenerative frequency divider**. \n* It exhibits a **bandpass operating frequency range** (it only functions correctly within a specific frequency window between $f_{min}$ and $f_{max}$).\n\n---\n\n### 4. **Power Consumption and Loading**\n* **Increased Dynamic Power:** The extra inverter adds capacitive loading to the feedback node and draws additional dynamic switching current.\n\n---\n\n### **Summary**\n| Performance Metric | Effect of Red Inverter |\n| :--- | :--- |\n| **Max Frequency ($f_{max}$)** | **Increases** (faster edge transitions and feedforward boost) |\n| **Min Frequency ($f_{min}$)** | **Increases** (circuit fails at low frequencies due to ring oscillation) |\n| **Operating Bandwidth** | Converts from broadband ($\\text{DC} \\to f_{max}$) to **bandpass** ($f_{min} \\to f_{max}$) |\n| **Power Consumption** | **Increases** |",
        "format": "markdown",
        "sha256": "1d9ab93a70a74b78955da29f7c48f2520aae42e001067cce3988fd27ae503273"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the feedforward bypass that improves high-speed operation and the unclocked three-inversion loop that corrupts operation at low frequencies, raising the minimum usable clock frequency. The extra characterization does not change these key conclusions.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 5271,
        "total_tokens": 6349,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 5271,
        "total_tokens": 6349,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic, here is a detailed analysis of how the red inverter affects the circuit's operation and performance:\n\n---\n\n### 1. Function of the Original Circuit (Without the Red Inverter)\nThe original circuit (in black) is a **dynamic master-slave toggle flip-flop (divide-by-2 frequency divider)**:\n* **Master Stage:** Composed of switch $CK$ and inverter $\\text{Inv}_1$.\n* **Slave Stage:** Composed of switch $\\overline{CK}$ and two cascaded inverters ($\\text{Inv}_2$ and $\\text{Inv}_3$).\n* **Operation:**\n  * When $CK = 1$ and $\\overline{CK} = 0$, the master is transparent and samples the feedback output $V_{out}$, storing $\\overline{V_{out}}$ at the output of $\\text{Inv}_1$. The slave is opaque (isolated).\n  * When $CK = 0$ and $\\overline{CK} = 1$, switch $CK$ opens to prevent feedback, while switch $\\overline{CK}$ closes to propagate the inverted signal through the slave to update $V_{out}$.\n  * Because the clock phases are complementary and isolated, the output transitions only **once per full clock cycle**, achieving **divide-by-2 frequency division**.\n\n---\n\n### 2. Impact of the Red Inverter on Performance and Functionality\n\n#### A. **Severe Race-Around Condition / Free-Running Oscillation (Functional Failure)**\n* **Bypassing the Master Clock Barrier:** The red inverter directly connects the feedback output $V_{out}$ to the node before switch $\\overline{CK}$, completely bypassing switch $CK$.\n* **Forming a 3-Stage Ring Oscillator:** When $\\overline{CK} = 1$ ($CK = 0$), switch $\\overline{CK}$ is closed. A complete, unblocked feedback loop is formed:\n  $$\\text{Red Inverter} \\longrightarrow \\text{Switch }\\overline{CK} \\longrightarrow \\text{Inv}_2 \\longrightarrow \\text{Inv}_3 \\longrightarrow \\text{Red Inverter}$$\n* Because this loop contains an **odd number (3) of inverting stages**, it becomes an **unstable ring oscillator**.\n* **Result:** While $\\overline{CK}$ remains high, the circuit will free-run and oscillate at a very high frequency (determined by the delay of the three inverters) rather than holding a single deterministic state. This race-around condition causes the circuit to **fail as a reliable frequency divider/latch**.\n\n---\n\n#### B. **Capacitive Loading and Power Consumption**\n* **Increased Parasitic Capacitance:** The red inverter adds extra input gate capacitance to the final output node and extra output junction capacitance to the intermediate node between $\\text{Inv}_1$ and switch $\\overline{CK}$.\n* **Higher Dynamic Power:** Because the internal node oscillates uncontrollably during the $\\overline{CK} = 1$ phase, switching activity and dynamic power dissipation drastically increase.\n\n---\n\n### Summary\nWhile in parallel with $\\text{Inv}_1$ during $CK = 1$, the red inverter might superficially appear to increase drive strength, **its actual effect is catastrophic to circuit performance**: it removes the isolation provided by switch $CK$, turning the divider into an unintended **3-stage ring oscillator during the $\\overline{CK} = 1$ phase** and causing complete functional failure.",
        "format": "markdown",
        "sha256": "aeaf9e48d0ed4dcd56ccc1184760e029655498c8eba84d1faffe07cbd6daf739"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the possible three-inversion loop, but misstates its effect as continuous catastrophic oscillation. The red inverter is a feedforward path that improves high-speed operation; the loop becomes a problem at low clock rates and raises the minimum usable frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 5426,
        "total_tokens": 6504,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 5426,
        "total_tokens": 6504,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit schematic, this circuit is a **dynamic frequency divider (divide-by-2)** constructed from a ring of inverters gated by complementary clock switches ($CK$ and $\\overline{CK}$). \n\nThe addition of the **red inverter** (connected in parallel with the switched inverter stage $CK + \\text{Inv}_1$) affects the performance in the following key ways:\n\n---\n\n### 1. Increases the Maximum Operating Frequency ($f_{\\text{max}}$) — **Advantage**\n* **Feedforward / Anticipatory Driving:** When $\\overline{CK}$ is HIGH ($CK$ is LOW), the signal propagating through the second and third inverters immediately feeds through the red inverter to start driving/charging the intermediate node (output of $\\text{Inv}_1$) **before** the $CK$ switch even turns on.\n* **Parallel Drive Strength:** When $CK$ turns HIGH, both the red inverter and $\\text{Inv}_1$ drive the intermediate node in parallel, effectively doubling the drive capability and reducing the RC transition delay.\n* **Overall Effect:** The circuit transitions much faster, significantly **increasing the maximum clock frequency ($f_{\\text{max}}$)** at which the divider can operate.\n\n---\n\n### 2. Imposes a Minimum Operating Frequency ($f_{\\text{min}}$) — **Disadvantage / Trade-off**\n* **Formation of a Ring Oscillator:** When $\\overline{CK}$ is HIGH, the switch is closed. In this phase, the second inverter, the third inverter, and the red inverter form a **closed loop of 3 inverters** (an odd number of inversions).\n* **Oscillation Risk:** This 3-inverter loop behaves as a **3-stage ring oscillator**. If the clock period is too long (i.e., low clock frequency), the loop will oscillate during the $\\overline{CK} = 1$ half-cycle, corrupting the logic state and causing improper divider operation.\n* **Overall Effect:** The divider **cannot operate down to DC or low frequencies**; it introduces a strict **minimum operating frequency ($f_{\\text{min}}$)**.\n\n---\n\n### 3. Power and Capacitive Loading\n* **Increased Capacitive Load:** The red inverter adds input capacitance to the output node of the 3rd inverter and output capacitance to the node before switch $\\overline{CK}$.\n* **Power Dissipation:** Because of the extra switching capacitance and potential transient contention/oscillation dynamics, the dynamic power consumption is slightly higher.\n\n---\n\n### Summary\n| Parameter | Effect of Red Inverter | Cause |\n| :--- | :--- | :--- |\n| **Max Speed ($f_{\\text{max}}$)** | **Increases significantly** | Unswitched feedforward path + parallel driving reduces propagation delays. |\n| **Min Speed ($f_{\\text{min}}$)** | **Increases (Loss of DC operation)** | Creates a 3-inverter ring oscillator during $\\overline{CK}=1$ that oscillates if the clock is too slow. |\n| **Power Consumption** | **Slightly increases** | Additional transistor switching and parasitic capacitances. |",
        "format": "markdown",
        "sha256": "657678e0262597556839322c4e123621042c9e912f22b6dc615bc1c5b1dc0177"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the feedforward path bypassing part of the first latch and improving speed, and the unclocked three-inversion loop that corrupts operation at low rates and raises the minimum usable frequency. The extra parallel-drive and power claims are not essential to the answer.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 5274,
        "total_tokens": 6352,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 5274,
        "total_tokens": 6352,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I completely disagree with that answer.** \n\nThe statement is fundamentally incorrect for several reasons, both in how the circuit is connected and in how it functions.\n\n---\n\n### Why the Provided Answer is Wrong\n\n1. **It is not cross-coupled:**\n   * A cross-coupled latch requires two inverters connected in **opposite directions** (anti-parallel: the output of inverter A drives the input of inverter B, and the output of inverter B drives the input of inverter A).\n   * Here, both $\\text{Inv}_1$ and the red inverter point in the **same direction** (feedforward, from left to right), with their outputs tied directly together. They form a parallel feedforward path, not a cross-coupled latch.\n\n2. **It does not act as a keeper / does not prevent leakage:**\n   * In the base dynamic divider, when switch $CK$ opens, the dynamic storage node is the **input** of $\\text{Inv}_1$.\n   * The red inverter is connected *around* switch $CK$ and $\\text{Inv}_1$, connecting the feedback node to the *output* of $\\text{Inv}_1$. It has no connection to the floating input of $\\text{Inv}_1$, so it does nothing to prevent charge leakage on that node.\n\n---\n\n### What the Circuit Actually Does\n\nWithout the red inverter, the circuit is a classic **dynamic master-slave toggle flip-flop (divide-by-2 circuit)**. \n\nWith the red inverter added:\n\n1. **When $CK = 1$ ($\\overline{CK} = 0$):**\n   * Switch $CK$ is closed and switch $\\overline{CK}$ is open.\n   * Both $\\text{Inv}_1$ and the red inverter receive the same signal from the output of $\\text{Inv}_3$ and drive the intermediate node in parallel to the same logic state.\n\n2. **When $CK = 0$ ($\\overline{CK} = 1$):**\n   * Switch $CK$ is open (intended to block the feedback and hold the sampled state), but **the red inverter completely bypasses switch $CK$**.\n   * Switch $\\overline{CK}$ is closed, completing an un-gated, continuous loop through:\n     $$\\text{Red Inverter} \\longrightarrow \\text{Switch } \\overline{CK} \\longrightarrow \\text{Inv}_2 \\longrightarrow \\text{Inv}_3 \\longrightarrow \\text{Red Inverter}$$\n   * This forms an active loop of **3 inverting stages** with all switches in the loop closed.\n\n---\n\n### Conclusion: The Actual Role/Effect of the Red Inverter\n\nRather than acting as a keeper, the red inverter creates a **bypass path that turns the circuit into a 3-stage ring oscillator during the $CK = 0$ phase**. \n\nInstead of holding its logic state, the circuit will oscillate uncontrollably whenever $CK = 0$, causing severe glitching, race conditions, and complete failure of the divider/latch functionality. \n\n*(If a static keeper were intended, a weak or tri-state inverter pointing in reverse would need to be placed across the storage nodes, not in forward parallel across the sampling switch and master inverter).*",
        "format": "markdown",
        "sha256": "56388e653d7a2ca452f95c0fdb6a07cec311a0a01bb3a08a56adddcd7ea3ede5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the feedforward bypass and three-inversion loop. But it wrongly claims the circuit oscillates and fails whenever CK is low; the loop is problematic mainly at low clock rates, while the bypass can improve high-speed operation. It misses this central tradeoff.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 4428,
        "total_tokens": 5553,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3737,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 4428,
        "total_tokens": 5553,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3737,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Do you agree with this answer?\n\n**No, I strongly disagree with the answer.** \n\nHere is why:\n* **Incorrect orientation and connection for a latch:** A cross-coupled latch (or keeper) requires two inverters connected **back-to-back** in anti-parallel (i.e., the keeper's input connected to the output of $\\text{Inv}_1$, and its output pointing *backward* to the node *after* the $CK$ switch).\n* **Actual orientation:** The red inverter points in the **same forward direction** (left-to-right) as $\\text{Inv}_1$. Its input is connected *before* the $CK$ switch, and its output is connected *after* $\\text{Inv}_1$. Therefore, it does **not** hold or refresh the floating charge at the input of $\\text{Inv}_1$ when $CK$ opens, and it cannot function as a keeper.\n\n---\n\n### 2. What is the actual role and effect of the red inverter?\n\n#### Context (Without the Red Inverter):\nThe black circuit is a standard **dynamic master-slave $\\div 2$ frequency divider** (or toggle flip-flop):\n* **Master stage:** Switch $CK$ + Inverter $\\text{Inv}_1$.\n* **Slave stage:** Switch $\\overline{CK}$ + Inverters $\\text{Inv}_2$ and $\\text{Inv}_3$.\n* With 3 inverters in the loop, the circuit inverts its state every clock cycle, dividing the clock frequency by 2.\n\n---\n\n#### Effect of Adding the Red Inverter:\nThe red inverter provides a **continuous feedforward bypass path** around the master sampling switch ($CK$):\n\n1. **When $CK = 1$ ($\\overline{CK} = 0$):**\n   * Switch $CK$ is closed. The red inverter and $\\text{Inv}_1$ are simply connected in parallel, redundantly driving the same intermediate node.\n\n2. **When $CK = 0$ ($\\overline{CK} = 1$):**\n   * Switch $\\overline{CK}$ closes while switch $CK$ opens.\n   * Because of the red inverter, there is an uninterrupted, active path:\n     $$\\text{Red Inverter} \\longrightarrow \\text{Switch } \\overline{CK} \\longrightarrow \\text{Inv}_2 \\longrightarrow \\text{Inv}_3 \\longrightarrow \\text{Red Inverter}$$\n   * This forms a closed loop of **three inverters in series** without any open switch to block propagation.\n\n### Conclusion:\nInstead of being a keeper, the red inverter **destroys master-slave isolation** and causes a **race condition**. During the phase when $\\overline{CK} = 1$, the circuit turns into an uncontrolled **3-stage ring oscillator**, preventing the circuit from functioning properly as a latch or frequency divider.",
        "format": "markdown",
        "sha256": "a47badb55e5e0e8c7758cf6582293d9ccb48f687d5b560c3f670715ff2b7ad2a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the feedforward bypass and the three-inversion loop when CKbar is on. However, it wrongly concludes that the loop always prevents divider operation; the branch can improve high-speed operation, while it corrupts division mainly at low clock rates and raises the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 4156,
        "total_tokens": 5281,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3532,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 4156,
        "total_tokens": 5281,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3532,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I do not agree with this answer.** \n\nThe quoted explanation is incorrect for several fundamental reasons:\n\n---\n\n### 1. Why the Quoted Answer is Wrong\n\n1. **It does not protect the dynamic node from leakage when $CK = 0$:**\n   * For the red inverter to act as a keeper and make the stage static, its output would need to be connected **after** the $CK$ switch (directly to the input of $\\text{Inv}_1$).\n   * Because it is connected **before** the $CK$ switch, when $CK = 0$ (switch is OPEN), the input of $\\text{Inv}_1$ is completely isolated and floating. Thus, charge leakage still occurs at the input of $\\text{Inv}_1$, and the minimum clock frequency requirement is **not** removed.\n\n2. **Severe Logic Contention during $\\overline{CK} = 1$ ($CK = 0$):**\n   * This circuit is intended to be a **dynamic $\\div 2$ frequency divider** (a toggle flip-flop). In the original circuit without the red inverter, when $\\overline{CK} = 1$, the data at the output of $\\text{Inv}_1$ propagates through the two inverters ($\\text{Inv}_2$ and $\\text{Inv}_3$) to update the node before the $CK$ switch to $\\text{Inv}_3(\\text{Inv}_2(V_{\\text{out1}})) = V_{\\text{out1}}$.\n   * However, the red inverter concurrently tries to drive that exact same node to $\\overline{V_{\\text{out1}}}$.\n   * As a result, **$\\text{Inv}_3$ and the red inverter attempt to drive the node to opposite logic levels simultaneously**, causing severe contention (short-circuit current) and preventing the circuit from toggling properly.\n\n---\n\n### 2. What is the Actual Role / Effect of the Red Inverter?\n\n* **When $CK = 1$ ($\\overline{CK} = 0$):**\n  * The $CK$ switch is closed. The red inverter and $\\text{Inv}_1$ form a closed, bistable cross-coupled latch that holds the state during the high clock phase.\n* **When $CK = 0$ ($\\overline{CK} = 1$):**\n  * The red inverter actively **fights and opposes** the state transition being driven by $\\text{Inv}_3$, disrupting the intended frequency division function.\n\n### Summary\nThe red inverter is a **flawed implementation** of a keeper: it fails to prevent leakage on the floating gate of $\\text{Inv}_1$ during $CK = 0$, and it creates destructive logic contention with $\\text{Inv}_3$ during state transitions.",
        "format": "markdown",
        "sha256": "7eaf67dd317f639a8448ee0ca9328c0ed050fa103b756ac5a29a8c70bc5a4fc3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Although it rejects the keeper claim, it misreads the connections, falsely describes a cross-coupled latch and contention at the wrong node, and misses the feedforward branch, its high-speed benefit, and its low-frequency failure mechanism.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 4918,
        "total_tokens": 6043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 4918,
        "total_tokens": 6043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the Noise Figure (**NF**) of the inverter-based resistive-feedback Low-Noise Amplifier (LNA) while maintaining an input resistance of **$R_{\\text{in}} = R_S = 50\\ \\Omega$**, we must analyze the input impedance, noise mechanisms, and transistor sizing.\n\n---\n\n### 1. Analytical Expressions for $R_{\\text{in}}$ and Noise Factor ($F$)\n\n#### **Input Resistance:**\nWith total transconductance $G_m = g_{m1} + g_{m2}$ and output resistance $r_o = r_{o1} \\parallel r_{o2}$, the input resistance with feedback is:\n$$R_{\\text{in}} = \\frac{R_F + r_o}{1 + G_m r_o}$$\n\nIf $r_o \\gg R_F$ (or assuming large intrinsic gain $G_m r_o \\gg 1$), this simplifies to:\n$$R_{\\text{in}} \\approx \\frac{1}{G_m} = \\frac{1}{g_{m1} + g_{m2}} = R_S = 50\\ \\Omega \\implies G_m \\approx 20\\text{ mS}$$\n\n---\n\n#### **Noise Factor ($F$):**\nThe total noise factor consists of the source noise, the thermal noise of $R_F$, and the channel noise of $M_1$ and $M_2$:\n$$F = 1 + \\underbrace{\\frac{1}{R_S R_F}\\left(\\frac{1 + G_m R_S}{G_m R_F - 1}\\right)^2}_{\\text{Noise from } R_F} + \\underbrace{\\frac{\\gamma G_m (R_S + R_F)^2}{R_S (G_m R_F - 1)^2}}_{\\text{Channel noise of } M_1, M_2}$$\n\nUnder the matched condition ($G_m R_S = 1$):\n$$F = 1 + \\frac{4 R_S^2}{R_F(R_F - R_S)^2} + \\gamma \\left(\\frac{R_F + R_S}{R_F - R_S}\\right)^2$$\n\n---\n\n### 2. Design & Optimization Guidelines\n\nTo minimize the Noise Figure under the $R_{\\text{in}} = 50\\ \\Omega$ constraint:\n\n#### **A. Maximize the Feedback Resistance ($R_F \\gg R_S$)**\n* As $R_F$ increases relative to $R_S$:\n  * The noise contribution of $R_F \\to 0$ (since noise current is $\\propto 1/R_F$).\n  * The channel noise term $\\left(\\frac{R_F + R_S}{R_F - R_S}\\right)^2 \\to 1$.\n* The noise factor approaches its fundamental lower bound:\n  $$F_{\\min} \\approx 1 + \\gamma \\quad (\\text{or } NF \\approx 2.2\\text{ dB to } 3.5\\text{ dB depending on channel length})$$\n* **Trade-off:** $R_F$ cannot be infinitely large due to loop stability, bandwidth limitations, and parasitic shunt capacitance across $R_F$.\n\n---\n\n#### **B. Exploit Current Reuse ($G_m = g_{m1} + g_{m2}$)**\n* $M_1$ and $M_2$ are in a **current-reuse** push-pull configuration: they share the same DC bias current $I_{DD}$.\n* Both NMOS and PMOS actively contribute transconductance:\n  $$g_{m1} + g_{m2} = 20\\text{ mS}$$\n* This doubles the transconductance efficiency ($G_m / I_{DD}$) compared to a single-transistor common-source amplifier, significantly lowering the power required to meet the $50\\ \\Omega$ match.\n\n---\n\n#### **C. Transistor Sizing and DC Biasing**\n* **Mobility Matching:** Size the transistors such that:\n  $$\\frac{(W/L)_2}{(W/L)_1} \\approx \\frac{\\mu_n}{\\mu_p} \\approx 2 - 3$$\n  This places the DC quiescent operating point at $V_{\\text{in,DC}} = V_{\\text{out,DC}} \\approx \\frac{V_{DD}}{2}$, ensuring both transistors operate in the saturation region with maximum $g_m$ and dynamic range.\n* **Channel Length:** Use minimum channel length $L_{\\min}$ to maximize the transit frequency $f_T$ and reduce gate parasitic capacitance ($C_{gs}, C_{gd}$).\n\n---\n\n#### **D. Account for Finite Output Resistance ($r_o$)**\nIf $r_o$ is not negligible:\n$$G_m = \\frac{1}{R_S} + \\frac{R_F - R_S}{R_S r_o}$$\n* Since $R_F > R_S$, a finite $r_o$ requires a **larger $G_m$** ($G_m > 20\\text{ mS}$) to achieve $R_{\\text{in}} = 50\\ \\Omega$.\n* A larger $G_m$ is beneficial because input-referred channel thermal noise voltage is inversely proportional to $G_m$ ($\\overline{v_{n,\\text{in}}^2} \\propto \\frac{\\gamma}{G_m}$).\n\n---\n\n#### **E. Size the Input Coupling Capacitor ($C_1$)**\n* Select $C_1$ large enough such that its reactance at the operating frequency $\\omega_0$ is negligible:\n  $$\\frac{1}{\\omega_0 C_1} \\ll 50\\ \\Omega$$\n* This prevents signal attenuation and ensures the self-biasing DC loop established by $R_F$ remains undisturbed.\n\n---\n\n### Summary Checklist for Minimum NF:\n1. **$R_F$:** Make $R_F \\gg 50\\ \\Omega$ (typically $R_F \\ge 500\\ \\Omega \\text{ to } 1\\ \\text{k}\\Omega$).\n2. **$G_m$:** Adjust bias and sizing so that $g_{m1} + g_{m2} \\approx 20\\text{ mS}$ (corrected for finite $r_o$).\n3. **Sizing:** Scale $(W/L)_2 \\approx 2.5(W/L)_1$ at minimum length $L$.\n4. **$C_1$:** Ensure $|Z_{C1}| \\ll 50\\ \\Omega$ at the RF carrier frequency.",
        "format": "markdown",
        "sha256": "1381a07e23407e47298b8e4f390258da0b30b47b42a3245279b89d304b5c8a83"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the finite-output-resistance input-match relation and recognizes that gm can exceed 1/Rs, but its recommended optimization still pins gm near 20 mS and claims NF cannot beat 1 + γ. It misses the key result: increase gm and adjust RF to preserve the match, allowing NF below that bound.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 11237,
        "total_tokens": 12353,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 11237,
        "total_tokens": 12353,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the inverter-based resistive-feedback Low-Noise Amplifier (LNA) for minimum **Noise Figure ($\\text{NF}$)** while maintaining a fixed input resistance $R_{\\text{in}} = R_S = 50\\,\\Omega$, we analyze the input impedance, noise mechanisms, and the resulting design trade-offs.\n\n---\n\n### 1. Small-Signal Input Resistance ($R_{\\text{in}}$)\n\nThe total transconductance is $G_m = g_{m1} + g_{m2}$, and the output resistance is $r_o = r_{o1} \\parallel r_{o2}$. \n\nUsing small-signal analysis, the input resistance $R_{\\text{in}}$ is given by:\n$$R_{\\text{in}} = \\frac{R_F + r_o}{1 + G_m r_o}$$\n\nTo enforce the matching condition $R_{\\text{in}} = R_S = 50\\,\\Omega$:\n$$R_F = R_S + r_o(G_m R_S - 1)$$\n\n* If $G_m = 1/R_S = 20\\text{ mS}$, then $R_F = R_S = 50\\,\\Omega$.\n* If $G_m > 1/R_S$, $R_F$ must be increased proportionally to maintain $R_{\\text{in}} = R_S$.\n\n---\n\n### 2. Noise Figure ($\\text{NF}$) Analysis\n\nThe circuit contains three main noise contributors:\n1. **Source resistance ($R_S$):** $\\overline{v_{n,RS}^2} = 4kTR_S$\n2. **Feedback resistor ($R_F$):** $\\overline{i_{n,RF}^2} = \\frac{4kT}{R_F}$\n3. **Channel thermal noise of $M_1$ and $M_2$:** $\\overline{i_{n,d}^2} = 4kT\\gamma(g_{m1} + g_{m2}) = 4kT\\gamma G_m$ (where $\\gamma$ is the MOS noise coefficient).\n\nUnder matched conditions ($R_{\\text{in}} = R_S$) and assuming open-loop gain $G_m R_F \\gg 1$, the Noise Figure is approximately:\n$$\\text{NF} \\approx 1 + \\underbrace{\\frac{R_S}{R_F} \\left(1 + \\frac{1}{G_m R_S}\\right)^2}_{\\text{Noise from } R_F} + \\underbrace{\\frac{\\gamma}{G_m R_S} \\left(1 + \\frac{R_S}{R_F}\\right)^2}_{\\text{Noise from } M_1, M_2}$$\n\nFor $G_m R_S \\gg 1$ and $R_F \\gg R_S$, this simplifies to:\n$$\\text{NF} \\approx 1 + \\frac{R_S}{R_F} + \\frac{\\gamma}{G_m R_S}$$\n\n---\n\n### 3. Optimization Strategy\n\nFrom the simplified NF equation, both noise degradation terms are minimized by:\n\n#### A. Simultaneously Increasing $G_m$ and $R_F$\n* **Increase $G_m$ well beyond $1/R_S$ ($G_m \\gg 20\\text{ mS}$):** This directly suppresses the transistor channel noise contribution ($\\propto \\frac{\\gamma}{G_m R_S}$).\n* **Increase $R_F$ accordingly:** As $G_m$ increases, $R_F \\approx G_m r_o R_S$ must be scaled up to maintain $R_{\\text{in}} = 50\\,\\Omega$. A larger $R_F$ reduces its thermal noise contribution ($\\propto \\frac{R_S}{R_F}$).\n\n#### B. Optimize Inverter Sizing for Maximum $G_m / I_D$ (Current Reuse)\n* The inverter topology reuses the same DC bias current $I_{DD}$ through both $M_1$ and $M_2$, achieving $G_m = g_{m1} + g_{m2}$.\n* Size the ratio of transistor widths:\n  $$\\frac{W_2}{W_1} \\approx \\frac{\\mu_n}{\\mu_p} \\approx 2 \\text{ to } 3$$\n  This places the self-biased DC operating point at $V_{\\text{in}} = V_{\\text{out}} \\approx V_{DD}/2$, maximizing transconductance and symmetric output voltage headroom.\n\n#### C. Maximize Output Resistance ($r_o$)\n* Increasing the transistor channel length $L$ slightly above the minimum feature size increases the intrinsic gain $g_m r_o$. A higher $r_o$ allows a larger $R_F$ for the same $R_{\\text{in}}$, further reducing the noise contribution of $R_F$.\n\n#### D. Properly Size the AC Coupling Capacitor ($C_1$)\n* Ensure $C_1$ is sufficiently large so that at the operating frequency $\\omega_0$:\n  $$\\frac{1}{\\omega_0 C_1} \\ll 50\\,\\Omega$$\n  This prevents signal attenuation, noise addition, and input impedance mismatch.\n\n---\n\n### 4. Practical Design Trade-offs\n\nWhile increasing $G_m$ and $R_F$ minimizes $\\text{NF}$, practical limits exist:\n\n| Parameter | Impact of Increasing $G_m$ / Transistor Sizes | Trade-off / Limitation |\n| :--- | :--- | :--- |\n| **Power Consumption** | Requires higher bias current $I_{DD}$. | Higher DC power dissipation. |\n| **Bandwidth / $S_{11}$** | Increases $C_{gs}$ and Miller-multiplied $C_{gd}$. | High-frequency input impedance becomes capacitive, degrading bandwidth and input return loss ($S_{11}$). |\n| **Linearity ($IIP_3$)** | Higher gain reduces the input 1-dB compression point. | Lower linearity and dynamic range. |",
        "format": "markdown",
        "sha256": "aa0bca5a447134d0b654ae46893985306454d5c63507ae6bb22f41db2f5bf99d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly includes finite output resistance in the input-match relation and explains that gm can exceed 1/Rs while RF is adjusted to hold Rin at 50 Ω, allowing NF below 1 + γ. The recommended increase in gm and RF matches the golden solution; peripheral approximations do not alter the central conclusion.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 11249,
        "total_tokens": 12365,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9903,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 11249,
        "total_tokens": 12365,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9903,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the **Noise Figure (NF)** of the complementary (inverter-based) shunt-feedback amplifier while maintaining an input resistance $R_{\\text{in}} = 50\\,\\Omega$, we analyze the input impedance, noise contributions, and design parameters.\n\n---\n\n### 1. Input Resistance Constraint ($R_{\\text{in}} = 50\\,\\Omega$)\n\nThe circuit is a complementary common-source stage ($M_1$ NMOS, $M_2$ PMOS) with resistive shunt feedback ($R_F$). \n\n* **Total transconductance:** $G_m = g_{m1} + g_{m2}$\n* **Output resistance:** $r_o = r_{o1} \\parallel r_{o2}$\n\nThe input resistance is given by:\n$$R_{\\text{in}} = \\frac{R_F + r_o}{1 + G_m r_o}$$\n\nFor high output resistance ($r_o \\gg R_F, 1/G_m$):\n$$R_{\\text{in}} \\approx \\frac{1}{G_m} = \\frac{1}{g_{m1} + g_{m2}}$$\n\nTo satisfy the input matching condition with the source resistance ($R_S = 50\\,\\Omega$):\n$$G_m = g_{m1} + g_{m2} = \\frac{1}{R_S} = \\frac{1}{50\\,\\Omega} = 20\\text{ mS}$$\n\n*(If finite $r_o$ is considered, $R_F$ and $G_m$ are jointly chosen such that $\\frac{R_F + r_o}{1 + G_m r_o} = 50\\,\\Omega$.)*\n\n---\n\n### 2. Noise Figure (NF) Analysis\n\nThe noise factor $F$ accounts for the thermal noise of the source ($R_S$), the feedback resistor ($R_F$), and the channel noise of $M_1$ and $M_2$:\n\n1. **Noise from Source ($R_S$):**\n   $$\\overline{v_{n,\\text{out},RS}^2} = 4kT R_S \\left(\\frac{G_m R_F - 1}{1 + G_m R_S}\\right)^2$$\n\n2. **Noise from Feedback Resistor ($R_F$):**\n   $$\\overline{v_{n,\\text{out},RF}^2} = 4kT R_F$$\n\n3. **Noise from Transistors ($M_1, M_2$):**\n   $$\\overline{v_{n,\\text{out},M1,M2}^2} = 4kT \\gamma (g_{m1} + g_{m2}) \\left(\\frac{R_S + R_F}{1 + G_m R_S}\\right)^2 = 4kT \\gamma G_m \\left(\\frac{R_S + R_F}{1 + G_m R_S}\\right)^2$$\n   *(where $\\gamma$ is the MOS channel noise parameter, typically $2/3$ for long-channel and $\\approx 1\\text{--}2$ for short-channel devices).*\n\nCombining these contributions under the matched condition $G_m R_S = 1$:\n$$F = 1 + \\frac{4 R_F R_S}{(R_F - R_S)^2} + \\gamma \\left(\\frac{R_F + R_S}{R_F - R_S}\\right)^2$$\n\n---\n\n### 3. Optimization Guidelines for Minimum NF\n\nTo achieve the lowest possible NF while keeping $R_{\\text{in}} = 50\\,\\Omega$:\n\n#### A. Maximize the Feedback Resistance ($R_F \\gg R_S$)\nFrom the noise factor formula, as $R_F \\gg R_S$:\n$$\\frac{4 R_F R_S}{(R_F - R_S)^2} \\approx \\frac{4 R_S}{R_F} \\longrightarrow 0$$\n$$\\left(\\frac{R_F + R_S}{R_F - R_S}\\right)^2 \\longrightarrow 1$$\nThus, the noise factor approaches its theoretical minimum:\n$$F_{\\text{min}} \\approx 1 + \\gamma \\quad \\left(\\text{or } NF_{\\text{min}} \\approx 10\\log_{10}(1 + \\gamma)\\right)$$\n* **Action:** Choose $R_F$ as large as possible (typically $\\ge 500\\,\\Omega \\text{ to } 1\\,\\text{k}\\Omega$) so its thermal current noise ($\\overline{i_{n,RF}^2} = 4kT/R_F$) becomes negligible.\n\n---\n\n#### B. Exploit Current Reuse ($g_{m1} + g_{m2} = 20\\text{ mS}$)\n* The inverter topology reuses the same DC bias current $I_{\\text{DD}}$ through both $M_1$ and $M_2$.\n* Distribute the transconductance between NMOS and PMOS:\n  $$g_{m1} + g_{m2} = 20\\text{ mS}$$\n* This current-reuse mechanism provides **twice the transconductance** for a given bias current compared to a single-transistor common-source stage, lowering the power required to meet the $50\\,\\Omega$ matching condition.\n\n---\n\n#### C. Proper DC Biasing and Sizing Ratio ($V_{\\text{in}} = V_{\\text{out}} = V_{\\text{DD}}/2$)\n* Resistor $R_F$ naturally self-biases the circuit such that $V_{\\text{GS}} = V_{\\text{DS}}$ for both transistors.\n* Size the aspect ratios to account for mobility differences:\n  $$\\frac{(W/L)_2}{(W/L)_1} \\approx \\frac{\\mu_n}{\\mu_p} \\approx 2\\text{ to }3$$\n* This places the DC operating point at $V_{\\text{DD}}/2$, ensuring:\n  1. Both $M_1$ and $M_2$ operate in the **saturation region** ($V_{\\text{DS}} > V_{\\text{GS}} - V_{\\text{TH}}$).\n  2. Maximum voltage swing and linearity.\n  3. Maximum transistor output resistance $r_o$, preserving the high open-loop gain.\n\n---\n\n#### D. Minimize Channel Length ($L = L_{\\text{min}}$)\n* Use the minimum allowable gate length $L_{\\text{min}}$ to maximize the transit frequency $f_T \\approx \\frac{g_m}{2\\pi C_{\\text{gg}}}$.\n* Minimizing gate capacitance ($C_{\\text{gs}}, C_{\\text{gd}}$) ensures that $R_{\\text{in}}$ remains purely resistive at $50\\,\\Omega$ over a wide bandwidth and avoids high-frequency noise figure degradation caused by capacitive input shunting.\n\n---\n\n#### E. Size the AC-Coupling Capacitor ($C_1$)\n* Ensure the impedance of $C_1$ is negligible at the lowest operating frequency $\\omega_{\\text{min}}$:\n  $$\\frac{1}{\\omega_{\\text{min}} C_1} \\ll 50\\,\\Omega$$\n* This prevents signal attenuation and noise penalty at the input.\n\n---\n\n### Summary Checklist\n\n| Parameter | Target Design Value | Purpose |\n| :--- | :--- | :--- |\n| **Total $G_m$** | $g_{m1} + g_{m2} = 20\\,\\text{mS}$ | Matches $R_{\\text{in}} = 1/G_m = 50\\,\\Omega$ |\n| **Feedback Resistor $R_F$** | $R_F \\gg 50\\,\\Omega$ ($\\ge 500\\,\\Omega$) | Minimizes noise contribution of $R_F$ |\n| **Sizing Ratio $(W/L)_2/(W/L)_1$** | $\\approx \\mu_n/\\mu_p$ ($2\\text{ to } 3$) | Biases stage at $V_{\\text{DD}}/2$ in saturation |\n| **Gate Length $L$** | Minimum allowable $L_{\\text{min}}$ | Maximizes $f_T$, minimizes parasitic capacitance |\n| **Coupling Cap $C_1$** | $X_{C1} \\ll 50\\,\\Omega$ at $\\omega_{\\text{min}}$ | Prevents low-frequency signal attenuation |",
        "format": "markdown",
        "sha256": "6e5b167e7306ddf07c5695c16ca7c110ab83cbbb2923dd65d149e12ec61eef0b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the finite-r_o input-resistance formula, but then fixes G_m=1/R_S and concludes that 1+\\gamma is the best noise factor. It misses the key optimization: increase G_m above 1/R_S and adjust R_F to maintain the match, allowing NF to fall below 1+\\gamma.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 13102,
        "total_tokens": 14218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 13102,
        "total_tokens": 14218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the input impedance $R_{\\text{in}}$ of the given transimpedance amplifier (TIA) circuit, we perform a small-signal analysis at low/mid-band frequencies (neglecting channel-length modulation, i.e., $\\lambda = 0$, and assuming matched PMOS transistors $M_2$ and $M_3$ with transconductance $g_{m2} = g_{m3}$).\n\n---\n\n### 1. Circuit Operation and Stage Gains\n\n1. **First Stage (Common-Source Amplifier, $M_1$):**\n   - Applying a test voltage $v_P$ at node $P$, the small-signal voltage at node $X$ is:\n     $$v_X = -g_{m1} R_{D1} v_P$$\n\n2. **Second Stage (PMOS Differential Pair, $M_2 - M_3$):**\n   - The differential pair is biased by an ideal tail current source $I_{\\text{SS}}$. \n   - With gate of $M_3$ at AC ground ($V_b$), the small-signal source voltage of the pair is:\n     $$v_s = \\frac{v_X + 0}{2} = \\frac{v_X}{2}$$\n   - The small-signal drain current flowing out of $M_3$ into the output node $V_{\\text{out}}$ is:\n     $$i_{d3} = g_{m2}(v_s - v_{g3}) = \\frac{1}{2} g_{m2} v_X = -\\frac{1}{2} g_{m1} g_{m2} R_{D1} v_P$$\n\n---\n\n### 2. KCL at Output Node ($V_{\\text{out}}$)\n\nSumming the currents at the output node $V_{\\text{out}}$:\n$$\\frac{v_P - v_{\\text{out}}}{R_F} + i_{d3} = \\frac{v_{\\text{out}}}{R_{D2}}$$\n\nSubstitute $i_{d3}$:\n$$\\frac{v_P - v_{\\text{out}}}{R_F} - \\frac{1}{2} g_{m1} g_{m2} R_{D1} v_P = \\frac{v_{\\text{out}}}{R_{D2}}$$\n\nRearranging the terms:\n$$v_P \\left( \\frac{1}{R_F} - \\frac{1}{2} g_{m1} g_{m2} R_{D1} \\right) = v_{\\text{out}} \\left( \\frac{1}{R_F} + \\frac{1}{R_{D2}} \\right)$$\n\n$$v_{\\text{out}} = v_P \\cdot \\frac{R_{D2} - \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} R_F}{R_F + R_{D2}}$$\n\n---\n\n### 3. Input Current and Input Resistance ($R_{\\text{in}}$)\n\nSince the gate of $M_1$ draws no current, the input current $i_{\\text{in}}$ entering node $P$ flows entirely through the feedback resistor $R_F$:\n$$i_{\\text{in}} = \\frac{v_P - v_{\\text{out}}}{R_F}$$\n\nSubstitute $v_{\\text{out}}$:\n$$i_{\\text{in}} = \\frac{v_P}{R_F} \\left[ 1 - \\frac{R_{D2} - \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} R_F}{R_F + R_{D2}} \\right]$$\n\n$$i_{\\text{in}} = \\frac{v_P}{R_F} \\left[ \\frac{(R_F + R_{D2}) - R_{D2} + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} R_F}{R_F + R_{D2}} \\right]$$\n\n$$i_{\\text{in}} = v_P \\left[ \\frac{1 + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2}}{R_F + R_{D2}} \\right]$$\n\nTherefore, the input resistance looking into node $P$ is:\n\n$$R_{\\text{in}} = \\frac{v_P}{i_{\\text{in}}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2}}$$\n\n---\n\n### 4. Summary\n\n* **Exact Low-Frequency Input Resistance:**\n  $$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2}}$$\n\n* **High-Gain Approximation** (when the open-loop gain $A_0 = \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} \\gg 1$):\n  $$R_{\\text{in}} \\approx \\frac{R_F + R_{D2}}{\\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2}}$$\n\n* **Total Input Impedance (including $C_{\\text{in}}$):**\n  $$Z_{\\text{in}}(s) = R_{\\text{in}} \\parallel \\frac{1}{s C_{\\text{in}}} = \\frac{R_{\\text{in}}}{1 + s R_{\\text{in}} C_{\\text{in}}}$$",
        "format": "markdown",
        "sha256": "cc9716da279fa7c8e4fafcd1a1440cbdd7ac45c665ceed56fe69146a2225f811"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It derives the exact input resistance, matching the golden result: (RF + RD2)/(1 + A0), with A0 = ½ gm1 gm2 RD1 RD2. The extra approximation and capacitance discussion does not change the correct result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 7493,
        "total_tokens": 8596,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6188,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 7493,
        "total_tokens": 8596,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6188,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the input impedance (and low-frequency input resistance $R_{\\text{in}}$) of the circuit, we perform a small-signal analysis. \n\n---\n\n### 1. Small-Signal Model & Analysis\n\nLet a small-signal test voltage $v_P$ be applied at node $P$, which causes an input current $i_{\\text{in}}$ to flow into the circuit. Assume the transistors have negligible channel-length modulation ($\\lambda \\approx 0 \\implies r_o \\to \\infty$) and the differential pair transistors $M_2$ and $M_3$ are matched with $g_{m2} = g_{m3} = g_{m2,3}$.\n\n#### **Step A: Voltage at Node $X$**\nTransistor $M_1$ forms a common-source amplifier with load resistor $R_{D1}$:\n$$v_X = -g_{m1} R_{D1} v_P$$\n\n---\n\n#### **Step B: Differential Pair Stage ($M_2, M_3$)**\nThe gates of $M_2$ and $M_3$ are driven by $v_X$ and AC ground ($V_b$ is a constant DC bias), respectively:\n- $v_{g2} = v_X$\n- $v_{g3} = 0$\n\nSince the tail is biased with an ideal current source $I_{SS}$, the small-signal common-source voltage $v_s$ is:\n$$v_s = \\frac{v_{g2} + v_{g3}}{2} = \\frac{v_X}{2}$$\n\nThe small-signal current flowing out of the drain of $M_3$ into the output node $V_{\\text{out}}$ is:\n$$i_{d3} = g_{m3}(v_s - v_{g3}) = g_{m2,3}\\left(\\frac{v_X}{2} - 0\\right) = \\frac{1}{2} g_{m2,3} v_X$$\n\nSubstituting $v_X = -g_{m1} R_{D1} v_P$:\n$$i_{d3} = -\\frac{1}{2} g_{m1} g_{m2,3} R_{D1} v_P$$\n\n---\n\n#### **Step C: Output Node ($V_{\\text{out}}$) KCL**\nApplying Kirchhoff's Current Law (KCL) at node $V_{\\text{out}}$:\n$$i_{d3} + \\frac{v_P - v_{\\text{out}}}{R_F} = \\frac{v_{\\text{out}}}{R_{D2}}$$\n\nSubstitute $i_{d3}$:\n$$-\\frac{1}{2} g_{m1} g_{m2,3} R_{D1} v_P + \\frac{v_P}{R_F} = v_{\\text{out}} \\left( \\frac{1}{R_{D2}} + \\frac{1}{R_F} \\right)$$\n\n$$v_P \\left( \\frac{1 - \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_F}{R_F} \\right) = v_{\\text{out}} \\left( \\frac{R_F + R_{D2}}{R_F R_{D2}} \\right)$$\n\n$$v_{\\text{out}} = v_P \\left[ \\frac{R_{D2} - \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2} R_F}{R_F + R_{D2}} \\right]$$\n\n---\n\n#### **Step D: Input Resistance $R_{\\text{in}}$ Looking into Node $P$**\nThe input current $i_{\\text{in}}$ enters node $P$ and flows through $R_F$ (since the gate of $M_1$ draws no current at low frequency):\n$$i_{\\text{in}} = \\frac{v_P - v_{\\text{out}}}{R_F}$$\n\nSubstitute $v_{\\text{out}}$:\n$$v_P - v_{\\text{out}} = v_P \\left[ 1 - \\frac{R_{D2} - \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2} R_F}{R_F + R_{D2}} \\right]$$\n\n$$v_P - v_{\\text{out}} = v_P \\left[ \\frac{R_F \\left(1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}\\right)}{R_F + R_{D2}} \\right]$$\n\nTherefore:\n$$i_{\\text{in}} = \\frac{v_P}{R_F + R_{D2}} \\left( 1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2} \\right)$$\n\n---\n\n### 2. Final Result\n\n#### **Input Resistance ($R_{\\text{in}}$):**\n$$R_{\\text{in}} = \\frac{v_P}{i_{\\text{in}}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}}$$\n\nIf the open-loop gain $|A_v| = \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2} \\gg 1$ and $R_F \\gg R_{D2}$, the input resistance simplifies to:\n$$R_{\\text{in}} \\approx \\frac{2 R_F}{g_{m1} g_{m2,3} R_{D1} R_{D2}}$$\n\n---\n\n#### **Total Input Impedance ($Z_{\\text{in}}(s)$ including $C_{\\text{in}}$):**\nTaking the input capacitance $C_{\\text{in}}$ into account:\n$$Z_{\\text{in}}(s) = R_{\\text{in}} \\parallel \\frac{1}{s C_{\\text{in}}} = \\frac{R_{\\text{in}}}{1 + s R_{\\text{in}} C_{\\text{in}}}$$",
        "format": "markdown",
        "sha256": "838c3ee3b221baf98ac708bc321ee7dfbb817dd8b0327b8e6a3fa6b3f5c890f1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact input resistance, \\(R_{in}=(R_F+R_{D2})/(1+A_0)\\), with the correct unloaded gain \\(A_0=\\tfrac12 g_{m1}g_{m2,3}R_{D1}R_{D2}\\). The derivation and high-gain approximation are consistent with the golden solution.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 6516,
        "total_tokens": 7619,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5083,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 6516,
        "total_tokens": 7619,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5083,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance (resistance) $R_{\\text{in}}$ looking into node $P$, we perform a small-signal analysis of the circuit.\n\n---\n\n### **1. Assumptions**\n* The transistors operate in the saturation region.\n* Channel-length modulation and body effect are neglected ($\\lambda = 0, \\gamma = 0$).\n* Transistors $M_2$ and $M_3$ are matched with transconductance $g_{m2} = g_{m3} = g_m$.\n* The bias voltage $V_b$ and supply $V_{DD}$ are small-signal AC grounds.\n* The tail current source $I_{SS}$ is ideal (infinite output impedance).\n\n---\n\n### **2. Small-Signal Analysis**\n\nApply a small-signal test voltage $v_t$ at node $P$:\n$$v_P = v_t$$\n\nThe test current $i_t$ entering node $P$ must all flow through the feedback resistor $R_F$ (since the gate of $M_1$ draws no current):\n$$i_t = \\frac{v_t - v_{\\text{out}}}{R_F} \\tag{1}$$\n\n#### **Step A: Voltage at Node $X$**\n$M_1$ acts as a common-source amplifier:\n$$v_X = -g_{m1} R_{D1} v_t \\tag{2}$$\n\n#### **Step B: Differential Stage ($M_2$–$M_3$)**\nFor the PMOS differential pair:\n* The gate of $M_2$ is at $v_X$.\n* The gate of $M_3$ is at AC ground ($v_{g3} = 0$).\n\nThe small-signal voltage at the coupled source node $S$ of $M_2$ and $M_3$ is:\n$$v_S = \\frac{v_X + 0}{2} = \\frac{v_X}{2}$$\n\nThe small-signal drain current of $M_3$ flowing into the output node $V_{\\text{out}}$ is:\n$$i_{d3} = g_{m3}(v_S - v_{g3}) = g_{m2} \\left(\\frac{v_X}{2} - 0\\right) = \\frac{1}{2} g_{m2} v_X$$\n\nSubstituting $v_X$ from equation (2):\n$$i_{d3} = -\\frac{1}{2} g_{m1} g_{m2} R_{D1} v_t \\tag{3}$$\n\n#### **Step C: KCL at the Output Node $V_{\\text{out}}$**\nSumming currents at node $V_{\\text{out}}$:\n$$i_{d3} = \\frac{v_{\\text{out}}}{R_{D2}} + \\frac{v_{\\text{out}} - v_t}{R_F}$$\n\nSubstitute $i_{d3}$ from equation (3):\n$$-\\frac{1}{2} g_{m1} g_{m2} R_{D1} v_t = v_{\\text{out}}\\left(\\frac{1}{R_{D2}} + \\frac{1}{R_F}\\right) - \\frac{v_t}{R_F}$$\n\nRearranging to solve for $v_{\\text{out}}$:\n$$v_{\\text{out}}\\left(\\frac{R_F + R_{D2}}{R_F R_{D2}}\\right) = v_t \\left(\\frac{1}{R_F} - \\frac{1}{2} g_{m1} g_{m2} R_{D1}\\right)$$\n\n$$v_{\\text{out}} = v_t \\cdot \\frac{R_{D2}\\left(1 - \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_F\\right)}{R_F + R_{D2}} \\tag{4}$$\n\n---\n\n### **3. Computing $R_{\\text{in}}$**\n\nUsing equation (1), find the voltage drop $(v_t - v_{\\text{out}})$ across $R_F$:\n$$v_t - v_{\\text{out}} = v_t \\left[1 - \\frac{R_{D2} - \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} R_F}{R_F + R_{D2}}\\right]$$\n\n$$v_t - v_{\\text{out}} = v_t \\left[\\frac{R_F + R_{D2} - R_{D2} + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} R_F}{R_F + R_{D2}}\\right] = v_t \\cdot \\frac{R_F \\left(1 + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2}\\right)}{R_F + R_{D2}}$$\n\nNow calculate the test current $i_t$:\n$$i_t = \\frac{v_t - v_{\\text{out}}}{R_F} = v_t \\cdot \\frac{1 + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2}}{R_F + R_{D2}}$$\n\nThus, the input resistance $R_{\\text{in}} = \\frac{v_t}{i_t}$ is:\n\n$$\\boxed{R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2}}}$$\n\n---\n\n### **4. Intuition & Special Cases**\n* **High Open-Loop Gain ($A_0 = \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} \\gg 1$) and $R_F \\gg R_{D2}$:**\n  $$R_{\\text{in}} \\approx \\frac{R_F}{\\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2}} = \\frac{R_F}{A_0}$$\n  *(demonstrating the Miller reduction of input impedance in a shunt-shunt feedback transimpedance amplifier).*\n\n* **Zero Gain ($g_{m1} = 0$):**\n  $$R_{\\text{in}} = R_F + R_{D2}$$\n  *(the input simply sees the series path of $R_F$ and $R_{D2}$ to ground).*",
        "format": "markdown",
        "sha256": "8e804bcc6da529fdbef56e007b7cf124967ca7ff6f583974f09896de74fe233a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact input resistance, \\(R_{in}=(R_F+R_{D2})/(1+A_0)\\), with the correct two-stage gain \\(A_0=\\tfrac12 g_{m1}g_{m2}R_{D1}R_{D2}\\).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 7086,
        "total_tokens": 8189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 7086,
        "total_tokens": 8189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise resulting from the thermal noise of the LDO regulator, we analyze how supply voltage fluctuations translate into phase fluctuations. \n\nThe dominant mechanism is **supply pushing (frequency modulation)**, where low-frequency noise on $V_{\\text{out}}$ modulates the tank's voltage-dependent capacitance, directly modulating the oscillation frequency.\n\n---\n\n### Step 1: Identify the Voltage-to-Capacitance Dependency\n1. **DC Voltage at the Tank Nodes ($X$ and $Y$):**\n   Since the inductors $L_1$ carry the DC bias current with negligible DC voltage drop, the average DC voltage at nodes $X$ and $Y$ is equal to the LDO output voltage:\n   $$V_{X,\\text{DC}} = V_{Y,\\text{DC}} \\approx V_{\\text{out}}$$\n\n2. **Varactor Tuning Voltage:**\n   The capacitance of the MOS varactors $M_{v1}$ and $M_{v2}$ depends on the gate-to-channel (or gate-to-bulk) voltage:\n   $$V_{\\text{var}} = V_{X,Y} - V_{\\text{cont}} \\approx V_{\\text{out}} - V_{\\text{cont}}$$\n   \n3. **Total Tank Capacitance:**\n   The total tank capacitance $C_{\\text{tot}}$ consists of:\n   $$C_{\\text{tot}}(V_{\\text{out}}) = C_{\\text{fixed}} + C_{\\text{bank}} + C_v(V_{\\text{out}} - V_{\\text{cont}}) + C_{\\text{par}}(V_{\\text{out}})$$\n   where $C_v$ is the varactor capacitance, and $C_{\\text{par}}$ includes the junction/gate capacitances of $M_1$ and $M_2$.\n\n---\n\n### Step 2: Determine the Supply Pushing Figure ($K_{\\text{push}}$)\nThe resonance frequency of the LC oscillator is:\n$$\\omega_0 = \\frac{1}{\\sqrt{L_{\\text{eq}} C_{\\text{tot}}(V_{\\text{out}})}}$$\n\nAny noise $\\Delta V_{\\text{out}}$ changes the frequency. The sensitivity of the oscillation frequency to the supply voltage is the **pushing factor** ($K_{\\text{push}}$):\n$$K_{\\text{push}} = \\frac{\\partial \\omega_0}{\\partial V_{\\text{out}}} = -\\frac{\\omega_0}{2 C_{\\text{tot}}} \\frac{\\partial C_{\\text{tot}}}{\\partial V_{\\text{out}}} \\quad [\\text{rad}/(\\text{s}\\cdot\\text{V})]$$\n\nIn terms of frequency in Hertz:\n$$K_{\\text{push,Hz}} = \\frac{\\partial f_0}{\\partial V_{\\text{out}}} = \\frac{K_{\\text{push}}}{2\\pi} \\quad [\\text{Hz/V}]$$\n\n*(Note: $K_{\\text{push,Hz}}$ can be obtained analytically from the $C$-$V$ curve of the varactors/transistors or measured directly by sweeping $V_{\\text{out}}$ in simulation).*\n\n---\n\n### Step 3: Compute the Phase Noise Spectrum ($\\mathcal{L}(\\Delta f)$)\n\n1. **Frequency Modulation to Phase Modulation:**\n   The noise voltage $v_n(t)$ with single-sided Power Spectral Density (PSD) $S_{\\text{th}}$ (in $\\text{V}^2/\\text{Hz}$) generates a frequency deviation:\n   $$\\Delta \\omega(t) = K_{\\text{push}} \\cdot v_n(t)$$\n\n   Phase is the time-integral of frequency, $\\phi(t) = \\int \\Delta\\omega(t) dt$. In the frequency domain, integration corresponds to division by the offset frequency $\\Delta \\omega = 2\\pi \\Delta f$:\n   $$S_\\phi(\\Delta f) = \\frac{K_{\\text{push}}^2}{(2\\pi \\Delta f)^2} S_{\\text{th}} = \\left(\\frac{K_{\\text{push,Hz}}}{\\Delta f}\\right)^2 S_{\\text{th}} \\quad [\\text{rad}^2/\\text{Hz}]$$\n\n2. **Single-Sideband Phase Noise ($\\mathcal{L}$):**\n   The phase noise $\\mathcal{L}(\\Delta f)$ at an offset frequency $\\Delta f$ from the carrier is half of the phase noise spectrum:\n   $$\\mathcal{L}(\\Delta f) = \\frac{1}{2} S_\\phi(\\Delta f) = \\frac{1}{2} \\left(\\frac{K_{\\text{push,Hz}}}{\\Delta f}\\right)^2 S_{\\text{th}}$$\n\n   Expressed in $\\text{dBc/Hz}$:\n   $$\\mathcal{L}(\\Delta f) = 10 \\log_{10} \\left[ \\frac{1}{2} \\left(\\frac{K_{\\text{push,Hz}}}{\\Delta f}\\right)^2 S_{\\text{th}} \\right]$$\n\n---\n\n### Step 4: High-Frequency Noise Folding (ISF Analysis)\nIf the LDO exhibits high-frequency noise around even harmonics of the oscillation frequency (e.g., $2\\omega_0$), this noise can be down-converted to the carrier through circuit non-linearities:\n\nUsing Hajimiri’s **Impulse Sensitivity Function (ISF)** model:\n$$\\mathcal{L}_{\\text{HF}}(\\Delta f) = \\frac{\\Gamma_{\\text{rms}, V_{\\text{out}}}^2}{2 q_{\\text{max}}^2 (2\\pi \\Delta f)^2} S_{\\text{th}}(2\\omega_0)$$\nwhere:\n* $\\Gamma_{\\text{rms}, V_{\\text{out}}}$ is the rms value of the ISF associated with the supply node $V_{\\text{out}}$.\n* $q_{\\text{max}} = C_{\\text{tot}} V_{\\text{swing}}$ is the maximum charge swing across the tank.\n\n---\n\n### Summary\nTo find the total phase noise due to the LDO:\n1. Find or measure the supply pushing figure $K_{\\text{push,Hz}} = \\frac{\\partial f_0}{\\partial V_{\\text{out}}}$.\n2. Calculate the phase noise at offset $\\Delta f$ using:\n   $$\\mathcal{L}(\\Delta f) \\approx \\frac{K_{\\text{push,Hz}}^2}{2 \\Delta f^2} S_{\\text{th}}$$",
        "format": "markdown",
        "sha256": "76ce15bfe33cd1dd2a88fea91e1c695d90b6e29f545d573ba3cd77cb0b23910f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing, defines the frequency sensitivity, and derives the expected 1/Δf² FM-to-phase-noise relation with the SSB factor. It omits the design takeaway that Kpush is closely related to KVCO and that reducing KVCO reduces this conversion; the added high-frequency-noise discussion is not needed.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 4868,
        "total_tokens": 5994,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 4868,
        "total_tokens": 5994,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise resulting from the LDO's thermal noise $S_{\\text{th}}$ (in $\\text{V}^2/\\text{Hz}$), we follow a step-by-step analysis based on **supply pushing (frequency modulation)**.\n\n---\n\n### 1. Mechanism of Noise Conversion (Supply Pushing)\n\n1. **Common-Mode Voltage:**\n   Because inductors $L_1$ exhibit negligible DC resistance, the average DC (common-mode) voltage at the oscillation nodes $X$ and $Y$ is equal to the LDO output voltage:\n   $$V_{X,\\text{DC}} = V_{Y,\\text{DC}} = V_{\\text{out}}$$\n\n2. **Varactor Tuning Sensitivity:**\n   The capacitance of the MOS varactors $M_{v1}$ and $M_{v2}$ depends directly on the voltage across them, which is $V_{X,Y} - V_{\\text{cont}} \\approx V_{\\text{out}} - V_{\\text{cont}}$. \n   \n   Any noise voltage $v_n(t)$ at the LDO output directly modulates the effective capacitance of the tank:\n   $$C_{\\text{tank}}(V_{\\text{out}}) = C_{\\text{fixed}} + C_v(V_{\\text{out}} - V_{\\text{cont}}) + C_{\\text{parasitics}}$$\n\n3. **Supply Pushing Factor ($K_{\\text{push}}$):**\n   Fluctuations in $V_{\\text{out}}$ modulate the oscillation frequency $\\omega_{\\text{osc}} = \\frac{1}{\\sqrt{L_1 C_{\\text{tank}}}}$. This sensitivity is defined as the **pushing figure**:\n   $$K_{\\text{push}} = \\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{out}}} = -\\frac{\\omega_{\\text{osc}}}{2 C_{\\text{tank}}} \\frac{\\partial C_{\\text{tank}}}{\\partial V_{\\text{out}}} \\quad \\left[\\frac{\\text{rad/s}}{\\text{V}}\\right]$$\n   \n   *(In Hertz: $K_{\\text{push, Hz}} = \\frac{\\partial f_{\\text{osc}}}{\\partial V_{\\text{out}}} = \\frac{K_{\\text{push}}}{2\\pi} \\ [\\text{Hz/V}]$)*\n\n   > **Note:** Because the varactor voltage is $V_{\\text{out}} - V_{\\text{cont}}$, $\\frac{\\partial C_v}{\\partial V_{\\text{out}}} = -\\frac{\\partial C_v}{\\partial V_{\\text{cont}}}$. If varactors dominate the voltage dependence of the tank, then $|K_{\\text{push}}| \\approx K_{\\text{VCO}}$.\n\n---\n\n### 2. Derivation of Phase Noise Spectrum\n\n1. **Frequency-to-Phase Integration:**\n   The instantaneous frequency variation caused by the LDO noise $v_n(t)$ is:\n   $$\\Delta\\omega(t) = K_{\\text{push}} \\cdot v_n(t)$$\n\n   The accumulated phase fluctuation $\\phi_n(t)$ is the integral of frequency over time:\n   $$\\phi_n(t) = \\int \\Delta\\omega(t)\\,dt = K_{\\text{push}} \\int v_n(t)\\,dt$$\n\n2. **Phase Noise PSD ($S_\\phi$):**\n   In the frequency domain (offset frequency $\\Delta\\omega$):\n   $$\\Phi_n(s) = \\frac{K_{\\text{push}}}{s} V_n(s) \\implies S_\\phi(\\Delta\\omega) = \\frac{K_{\\text{push}}^2}{\\Delta\\omega^2} S_{\\text{th}}$$\n\n3. **Single-Sideband Phase Noise $\\mathcal{L}(\\Delta f)$:**\n   The phase noise at an offset frequency $\\Delta f = \\frac{\\Delta\\omega}{2\\pi}$ is:\n   $$\\mathcal{L}(\\Delta f) = \\frac{1}{2} S_\\phi(\\Delta f) = \\frac{K_{\\text{push, Hz}}^2 \\cdot S_{\\text{th}}}{2 \\Delta f^2} = \\frac{K_{\\text{push}}^2 \\cdot S_{\\text{th}}}{2 (2\\pi \\Delta f)^2}$$\n\n   Expressed in $\\text{dBc/Hz}$:\n   $$\\mathcal{L}(\\Delta f) = 10 \\log_{10} \\left( \\frac{K_{\\text{push, Hz}}^2 \\cdot S_{\\text{th}}}{2 \\Delta f^2} \\right)$$\n\n---\n\n### 3. Summary of Computation Steps\n\n1. **Determine LDO Noise PSD ($S_{\\text{th}}$):** Obtain the voltage noise spectral density at the LDO output (in $\\text{V}^2/\\text{Hz}$).\n2. **Find the Pushing Factor ($K_{\\text{push}}$):**\n   - Simulate or measure the VCO frequency as a function of supply voltage $V_{\\text{out}}$.\n   - Compute the slope $K_{\\text{push, Hz}} = \\frac{\\Delta f_{\\text{osc}}}{\\Delta V_{\\text{out}}}$.\n3. **Calculate Output Phase Noise:**\n   $$\\mathcal{L}(\\Delta f) = 10 \\log_{10} \\left( \\frac{K_{\\text{push, Hz}}^2 \\cdot S_{\\text{th}}}{2 \\Delta f^2} \\right) \\quad [\\text{dBc/Hz}]$$\n\n*(Optional second-order effect: If the tail current source $I_{\\text{VCO}}$ has a finite output impedance, supply noise can also cause AM-PM conversion through the nonlinear drain-bulk/drain-gate capacitances of $M_1$ and $M_2$, which further increases $K_{\\text{push}}$.)*",
        "format": "markdown",
        "sha256": "61b1ba49c5c8cab04df699de09df559555158e00d7452d21dc7721618b92df97"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing through the varactors, defines the frequency sensitivity Kpush = dfosc/dVout, and converts LDO voltage-noise PSD to phase noise with the required 1/Δf² dependence. It also notes the relationship to KVCO and the benefit of reducing KVCO; any factor-of-2 or 2π conventions are secondary.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 4238,
        "total_tokens": 5364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2963,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 4238,
        "total_tokens": 5364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2963,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the VCO output phase noise resulting from the LDO regulator's thermal noise $S_{\\text{th}}$ (in $\\text{V}^2/\\text{Hz}$), we analyze how supply noise modulates the VCO frequency—a mechanism known as **supply pushing** or **FM modulation**.\n\n---\n\n### 1. Mechanism of Noise Conversion\nThe output voltage of the LDO, $V_{\\text{out}}$, sets the common-mode voltage at the oscillator nodes $X$ and $Y$ (since the inductors $L_1$ carry minimal DC voltage drop):\n$$V_{\\text{CM}} \\approx V_{\\text{out}}$$\n\nThe varactors ($M_{v1}, M_{v2}$) experience a reverse bias given by:\n$$V_{\\text{var}} = V_{\\text{CM}} - V_{\\text{cont}} \\approx V_{\\text{out}} - V_{\\text{cont}}$$\n\nWhen low-frequency noise from the LDO modulates $V_{\\text{out}}$, it alters the effective capacitance of the tank, thereby modulating the oscillation frequency $\\omega_0$.\n\n---\n\n### 2. Determine the Supply Pushing Factor ($K_{\\text{push}}$)\nThe sensitivity of the oscillation frequency to supply variations is defined as the **pushing factor**:\n\n$$K_{\\text{push}} = \\frac{\\partial \\omega_0}{\\partial V_{\\text{out}}} = 2\\pi \\frac{\\partial f_0}{\\partial V_{\\text{out}}} \\quad [\\text{rad}/(\\text{s}\\cdot\\text{V})]$$\n\n*(Note: If the varactor tuning dominates the frequency variation, the pushing gain is approximately equal in magnitude to the VCO tuning gain: $K_{\\text{push}} \\approx 2\\pi K_{\\text{VCO}}$.)*\n\n---\n\n### 3. Modulation from Frequency to Phase Noise\nA low-frequency noise voltage perturbation $v_n(t)$ with power spectral density $S_{\\text{th}}$ causes an instantaneous frequency fluctuation:\n$$\\Delta\\omega(t) = K_{\\text{push}} \\, v_n(t)$$\n\nSince phase is the integral of frequency ($\\phi(t) = \\int \\Delta\\omega(t)\\,dt$), in the frequency domain:\n$$\\Phi(s) = \\frac{K_{\\text{push}}}{s} V_n(s)$$\n\nThus, the phase noise power spectral density $S_\\phi(\\Delta f)$ at an offset frequency $\\Delta f$ is:\n$$S_\\phi(\\Delta f) = \\left|\\frac{K_{\\text{push}}}{j 2\\pi \\Delta f}\\right|^2 S_{\\text{th}} = \\frac{K_{\\text{push}}^2}{(2\\pi \\Delta f)^2} S_{\\text{th}}$$\n\n---\n\n### 4. Output Single-Sideband (SSB) Phase Noise\nThe standard Single-Sideband phase noise $\\mathcal{L}(\\Delta f)$ (in $\\text{rad}^2/\\text{Hz}$ or $\\text{dBc/Hz}$) is given by:\n\n$$\\mathcal{L}(\\Delta f) = \\frac{1}{2} S_\\phi(\\Delta f) = \\frac{1}{2} \\left(\\frac{K_{\\text{push}}}{2\\pi \\Delta f}\\right)^2 S_{\\text{th}}$$\n\nAlternatively, if using $K_{\\text{push, Hz}} = \\frac{\\partial f_0}{\\partial V_{\\text{out}}}$ (in $\\text{Hz/V}$):\n\n$$\\mathcal{L}(\\Delta f) = \\frac{K_{\\text{push, Hz}}^2}{2 \\, \\Delta f^2} S_{\\text{th}}$$\n\nExpressed in **$\\text{dBc/Hz}$**:\n$$\\mathcal{L}(\\Delta f) = 10 \\log_{10} \\left[ \\frac{K_{\\text{push, Hz}}^2}{2 \\, \\Delta f^2} S_{\\text{th}} \\right]$$\n\n---\n\n### Summary Checklist to Compute It:\n1. **Find/Measure $S_{\\text{th}}$:** The output noise density of the LDO (in $\\text{V}^2/\\text{Hz}$).\n2. **Find/Simulate $K_{\\text{push}}$:** Sweep $V_{\\text{out}}$ around its nominal operating point, measure $\\Delta f_0$, and calculate $K_{\\text{push, Hz}} = \\frac{\\Delta f_0}{\\Delta V_{\\text{out}}}$.\n3. **Apply the formula:** Substitute into $\\mathcal{L}(\\Delta f) = \\frac{K_{\\text{push, Hz}}^2}{2 \\, \\Delta f^2} S_{\\text{th}}$ at the offset frequency of interest $\\Delta f$.",
        "format": "markdown",
        "sha256": "dcfc686c9931cc2ef353074b4fe259cdaf933b7121a832554687b3fa229b8b5e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, defines and measures the frequency sensitivity to LDO output noise, and applies FM-to-phase conversion with the required 1/Δf² dependence. It also captures that the supply perturbation acts directly on the varactors, linking Kpush to KVCO; the stated unit conventions and formulas are consistent.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 3111,
        "total_tokens": 4237,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 3111,
        "total_tokens": 4237,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor $C_T$ to the tail node $P$ **degrades (increases) the phase noise** of the cross-coupled LC oscillator. \n\nWhile it might seem intuitively that $C_T$ acts as a \"bypass capacitor\" to filter noise from the tail current source $I_{\\text{SS}}$, it actually worsens the overall phase noise through several key mechanisms:\n\n---\n\n### 1. Loss of Source Degeneration for the Switching Pair ($M_1, M_2$)\n* **Without $C_T$:** The tail current source presents a high impedance at node $P$. When both transistors $M_1$ and $M_2$ are on, the tail impedance provides source degeneration, which strongly suppresses and limits the amount of channel thermal noise current ($4kT\\gamma g_m$) that $M_1$ and $M_2$ can inject into the tank.\n* **With $C_T$:** At high frequencies (the oscillation frequency $\\omega_0$ and its harmonics, especially $2\\omega_0$), $C_T$ acts as a low-impedance path (AC ground). As a result, the source degeneration is lost, and the channel noise of $M_1$ and $M_2$ flows directly and unimpeded into the resonant tank.\n\n---\n\n### 2. Maximum Noise Injection at Sensitive Zero-Crossings\n* In an oscillator, phase noise is governed by the **Impulse Sensitivity Function (ISF, $\\Gamma(t)$)**. The oscillator is most sensitive to noise perturbations during the **zero crossings** of the differential output voltage (when $V_X = V_Y$).\n* During zero-crossing, both $M_1$ and $M_2$ are simultaneously in the active/saturation region.\n* With $C_T$ holding node $P$ at AC ground, both transistors exhibit a high transconductance ($g_m$) and inject maximum thermal noise into the LC tank precisely when the circuit’s sensitivity to phase perturbations is at its peak.\n\n---\n\n### 3. Upconversion of Noise at $2\\omega_0$\n* The tail node $P$ naturally oscillates at the second harmonic ($2\\omega_0$).\n* A low impedance at $2\\omega_0$ (provided by $C_T$) allows differential-pair noise currents around $2\\omega_0$ and $\\omega_0$ to circulate easily and be mixed/upconverted down to the fundamental frequency $\\omega_0$, directly appearing as close-in phase noise.\n\n---\n\n### 4. Large Peak Currents and Increased Cyclostationary Noise\n* Because $C_T$ holds the source voltage relatively constant, the transistors draw large, narrow current spikes as their gate voltages oscillate above threshold. \n* These periodic current spikes significantly increase the time-varying (cyclostationary) noise generated by the transistors.\n\n---\n\n### Summary / Practical Context\nIn RF IC design (e.g., the *Hegazi-Abidi Noise Filtering Technique*), parasitic capacitance at node $P$ is considered detrimental. Rather than adding capacitance to ground, designers often add an **inductor in series** or a **parallel $LC$ tank tuned to $2\\omega_0$** at the tail to **resonate out** the capacitance and maintain a high impedance at $2\\omega_0$, which substantially improves phase noise.",
        "format": "markdown",
        "sha256": "e45542e37ea33d21143dd6b3f1b237a241a14c6703dd04e4868004d207e55240"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer asserts that adding CT monotonically worsens phase noise, missing the nonmonotonic tradeoff. It mentions large current spikes but treats them only as harmful, whereas the class-C-like operation they can produce can lower phase noise; it also omits the relevant CT-dependent degradations.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 4415,
        "total_tokens": 5515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3691,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 4415,
        "total_tokens": 5515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3691,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor $C_T$ to the tail node **degrades (worsens/increases) the phase noise** of the LC oscillator. \n\nAlthough it might seem intuitively beneficial as a low-pass filter for high-frequency noise from the tail current source $I_{\\text{SS}}$, the net effect is significantly worse phase noise due to the following mechanisms:\n\n---\n\n### 1. Increased Thermal Noise Contribution from Cross-Coupled Transistors ($M_1, M_2$)\n* **High Sensitivity at Zero-Crossings:** An oscillator is most sensitive to noise perturbations during the zero-crossings of the differential output voltage (where the Impulse Sensitivity Function, $\\Gamma(t)$, reaches its maximum). At these instants, both $M_1$ and $M_2$ are simultaneously in saturation.\n* **Without $C_T$:** The tail node $P$ presents a high impedance at high frequencies. This provides strong source degeneration to the transistors, limiting their channel thermal noise current ($4kT\\gamma g_m$) from flowing into the tank resonators.\n* **With $C_T$:** $C_T$ acts as an **AC ground** at RF frequencies. This eliminates the source degeneration, allowing the full channel thermal noise of both $M_1$ and $M_2$ to flow directly into the tanks ($L_1, L_2$) precisely when the circuit is most sensitive to phase perturbation.\n\n---\n\n### 2. Loading of the Tank Resonator ($Q$-Degradation)\n* During the zero-crossing transition, when both transistors conduct and their sources are tied to AC ground via $C_T$, each transistor presents a small impedance ($\\approx 1/g_m$) to the tank.\n* This heavily loads the LC tanks, reducing the **effective quality factor ($Q$)** of the resonator during the switching transitions and leading to higher phase noise.\n\n---\n\n### 3. Asymmetric Tail Current Spikes\n* Node $P$ naturally experiences a $2\\omega_0$ voltage oscillation. \n* A large capacitance $C_T$ absorbs and delivers large displacement currents ($i = C_T \\frac{dV_P}{dt}$) during switching. This alters the switching dynamics and broadens the time window during which both transistors conduct simultaneously, further increasing noise injection.\n\n---\n\n### Summary\n* **Result:** **Phase noise degrades.**\n* **Design Insight:** To improve phase noise, designers avoid placing a simple shunt capacitor at the tail node. Instead, they use a **tail filter** (such as a series inductor and capacitor tuned to resonate at the second harmonic, $2\\omega_0$) to provide a *high* common-mode impedance at $2\\omega_0$ while filtering low-frequency tail noise.",
        "format": "markdown",
        "sha256": "94b8eb4d6f458685a12d829977b12ce2cce096bd22ee19a4ba2ca54e0392073d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives a monotonic phase-noise degradation, missing the nonmonotonic effect and the class-C-like improvement that can occur for moderate CT. Its proposed thermal-noise and tank-loading explanations do not capture the specified Razavi mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2989,
        "total_tokens": 4089,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2401,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2989,
        "total_tokens": 4089,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2401,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a tail capacitor $C_{\\text{T}}$ directly at the source node $P$ **degrades (worsens) the phase noise** of the cross-coupled LC oscillator.\n\n---\n\n### Detailed Mechanisms:\n\n#### 1. Increased Noise from the Switching Pair ($M_1, M_2$)\n* **Zero-Crossing Sensitivity:** Phase noise is most sensitive to noise injected during the zero-crossings of the differential output (where the Impulse Sensitivity Function, $\\Gamma(t)$, reaches its peak).\n* **Loss of Degeneration:** At the zero-crossings, both $M_1$ and $M_2$ are simultaneously ON and operating in saturation. \n* Without $C_{\\text{T}}$, the tail current source presents a high impedance, providing common-mode degeneration that suppresses noise. \n* With $C_{\\text{T}}$, node $P$ acts as an **AC ground** at high frequencies. This eliminates degeneration, allowing the channel thermal noise of both $M_1$ and $M_2$ to flow directly into the LC tank unattenuated, significantly increasing the phase noise.\n\n#### 2. Reduction in Oscillation Amplitude ($V_{\\text{tank}}$)\n* As the oscillator switches, node $P$ naturally experiences a $2\\omega_0$ voltage ripple. \n* The capacitor $C_{\\text{T}}$ must be periodically charged and discharged by the transistors and current source $I_{\\text{SS}}$. This distorts and rounds the drain current waveforms, reducing the fundamental harmonic current injected into the LC tanks.\n* Because phase noise is inversely proportional to the square of the oscillation amplitude ($\\mathcal{L}(\\Delta\\omega) \\propto \\frac{1}{V_{\\text{osc}}^2}$), a smaller signal swing directly degrades the phase noise.\n\n#### 3. Why Tail-Filtering Noise Fails Here\n* While $C_{\\text{T}}$ does filter out high-frequency noise from the tail current source $I_{\\text{SS}}$ around $2\\omega_0$, the **increase in noise from the switching transistors ($M_1, M_2$) far exceeds the reduction in tail current noise**.\n\n---\n\n### Summary\n* **Result:** Phase noise **increases (degrades)**.\n* **Remedy (Noise-Filtering Technique):** To actually improve phase noise, an inductor is placed in series with the tail to resonate with $C_{\\text{T}}$ at $2\\omega_0$ (Hegazi/Abidi tail filter). This creates a **high impedance** at $2\\omega_0$ at node $P$ while shunting the low-frequency noise of $I_{\\text{SS}}$ to ground.",
        "format": "markdown",
        "sha256": "74c2bd8be7db79c78a9b133570843689811404a65f4d187afbffcafdaee03b02"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that adding CT always worsens phase noise, missing the nonmonotonic effect and the class-C regime where peak tank currents can reduce phase noise. Its stated degradation mechanisms do not capture the key mechanisms in the golden solution.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 3667,
        "total_tokens": 4767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 3667,
        "total_tokens": 4767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit schematic, this is a **parallel-coupled Quadrature LC Voltage-Controlled Oscillator (P-QVCO)**. It consists of two identical LC cross-coupled oscillators coupled to each other to produce four-phase (quadrature) outputs ($0^\\circ, 90^\\circ, 180^\\circ, 270^\\circ$).\n\n---\n\n### **1. Circuit Description and Symmetry**\n\n* **Stage 1 (Top):**\n  * Load: Inductors $L$ at nodes $X_1$ and $Y_1$ along with total node capacitance $C$ (parasitic and tank capacitance).\n  * Core cross-coupled pair: Biased with tail current $I_{\\text{SS}}$, provides negative transconductance ($-g_{m0}$) to compensate for tank losses.\n  * Coupling pair: Biased with tail current $I_1$, transconductance $g_{m1}$, driven by Stage 2 outputs $(X_2, Y_2)$ in **anti-phase** (cross-coupled).\n\n* **Stage 2 (Bottom):**\n  * Identical LC tank ($L, C$) at nodes $X_2$ and $Y_2$.\n  * Core cross-coupled pair: Biased with tail current $I_{\\text{SS}}$ (transconductance $g_{m0}$).\n  * Coupling pair: Biased with tail current $I_1$ (transconductance $g_{m1}$), driven by Stage 1 outputs $(X_1, Y_1)$ in **in-phase** (direct connection).\n\n---\n\n### **2. Derivation of the Oscillation Frequency**\n\nLet:\n* $V_1 = V_{X1} - V_{Y1}$ be the differential voltage of Stage 1.\n* $V_2 = V_{X2} - V_{Y2}$ be the differential voltage of Stage 2.\n* $\\omega_0 = \\frac{1}{\\sqrt{LC}}$ be the natural uncoupled resonance frequency of each LC tank.\n* $Y(j\\omega) = \\frac{1}{R_p} + j\\left(\\omega C - \\frac{1}{\\omega L}\\right)$ be the equivalent admittance of each differential tank (where $R_p$ represents tank loss).\n\n#### **Nodal Equations (KCL):**\nFor Stage 1:\n$$Y(j\\omega) V_1 = g_{m0} V_1 + g_{m1} V_2 \\implies [Y(j\\omega) - g_{m0}] V_1 = g_{m1} V_2$$\n\nFor Stage 2 (due to the sign inversion of cross-coupling):\n$$Y(j\\omega) V_2 = g_{m0} V_2 - g_{m1} V_1 \\implies [Y(j\\omega) - g_{m0}] V_2 = -g_{m1} V_1$$\n\n#### **Eigenvalue Condition:**\nCombining both equations:\n$$[Y(j\\omega) - g_{m0}]^2 = -g_{m1}^2 \\implies Y(j\\omega) - g_{m0} = \\pm j g_{m1}$$\n\nThis also yields the quadrature relationship:\n$$V_2 = \\pm j V_1 \\quad (\\text{a } 90^\\circ \\text{ phase shift between the two stages})$$\n\n---\n\n### **3. Frequency Equation**\n\nEquating the real and imaginary parts of $Y(j\\omega) - g_{m0} = \\pm j g_{m1}$:\n\n1. **Real Part (Gain Condition):**\n   $$g_{m0} = \\frac{1}{R_p}$$\n\n2. **Imaginary Part (Frequency Condition):**\n   $$\\omega C - \\frac{1}{\\omega L} = \\pm g_{m1}$$\n\nMultiplying by $\\frac{\\omega}{C}$:\n$$\\omega^2 \\mp \\frac{g_{m1}}{C}\\omega - \\omega_0^2 = 0$$\n\nSolving the quadratic equation for $\\omega > 0$:\n$$\\omega = \\pm \\frac{g_{m1}}{2C} + \\sqrt{\\omega_0^2 + \\left(\\frac{g_{m1}}{2C}\\right)^2}$$\n\n---\n\n### **4. Summary of Approximations**\n\n* **Small-Signal / First-Order Approximation** (for $\\frac{g_{m1}}{2C} \\ll \\omega_0$):\n  $$\\omega \\approx \\omega_0 \\pm \\frac{g_{m1}}{2C} = \\frac{1}{\\sqrt{LC}} \\pm \\frac{g_{m1}}{2C}$$\n\n* **In terms of Tank Quality Factor $Q = \\frac{\\omega_0 C}{g_{m0}} = R_p \\omega_0 C$:**\n  $$\\omega \\approx \\omega_0 \\left(1 \\pm \\frac{1}{2Q} \\frac{g_{m1}}{g_{m0}}\\right)$$\n\n* **Large-Signal Current-Ratio Formulation:**\n  Since the effective transconductance ratio is proportional to the bias current ratio:\n  $$\\omega \\approx \\omega_0 \\left(1 \\pm \\frac{1}{2Q} \\frac{I_1}{I_{\\text{SS}}}\\right)$$\n\n*(Note: The $\\pm$ sign corresponds to the two possible oscillation modes/frequency shifts, which dictate whether Stage 1 leads or lags Stage 2 by $90^\\circ$.)*",
        "format": "markdown",
        "sha256": "d1e62d245924312229ea187bdeb6f619bfeb1da237cc86d2517ffe500a019d36"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the tank resonance and the correct coupling shift, Δω ≈ (gₘ₁/gₘ₀)ω₀/(2Q), as well as the equivalent current-ratio form. Its gₘ₁/(2C) expression follows from the stated gain condition gₘ₀ = 1/Rₚ, so it does not conflict with the required edge-of-oscillation caveat.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 13318,
        "total_tokens": 14421,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12091,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 13318,
        "total_tokens": 14421,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12091,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Identification\nThe circuit shown is a classic **two-stage LC Quadrature Voltage-Controlled Oscillator (QVCO)**. \n\nIt consists of two identical differential LC oscillators:\n- **Stage 1 (top):** Outputs at nodes $X_1$ and $Y_1$, biased with tail currents $I_{SS}$ (cross-coupled pair) and $I_1$ (coupling pair).\n- **Stage 2 (bottom):** Outputs at nodes $X_2$ and $Y_2$, biased with tail currents $I_{SS}$ (cross-coupled pair) and $I_1$ (coupling pair).\n\n#### Inter-stage Connections:\n- **Stage 1 to Stage 2:** Direct (non-inverting) coupling ($X_1 \\to$ left gate of stage 2, $Y_1 \\to$ right gate of stage 2).\n- **Stage 2 to Stage 1:** Cross (inverting) coupling ($X_2 \\to$ right gate of stage 1, $Y_2 \\to$ left gate of stage 1).\n\n---\n\n### 2. Quadrature Oscillation Condition\n\nLet the differential voltages be:\n$$V_1 = X_1 - Y_1$$\n$$V_2 = X_2 - Y_2$$\n\nDue to the single inversion in the two-stage loop, the total phase shift around the loop must be an integer multiple of $360^\\circ$:\n$$\\phi_1 + \\phi_2 + 180^\\circ = 360^\\circ \\implies \\phi_1 = \\phi_2 = \\pm 90^\\circ$$\n\nThus, the outputs are in **quadrature**:\n$$V_2 = \\pm j V_1$$\n\n---\n\n### 3. Derivation of the Oscillation Frequency\n\nLet each tank have an inductance $L$, total node capacitance $C$ (including transistor parasitic capacitances $C_{gs}, C_{gd}, C_{db}$), an equivalent parallel resistance $R_p$, and a nominal resonant frequency:\n$$\\omega_0 = \\frac{1}{\\sqrt{LC}}$$\nThe tank quality factor is $Q = \\frac{R_p}{\\omega_0 L} = R_p \\omega_0 C$.\n\n#### Current Injection into the Tank:\nThe total differential current injected into the tank of Stage 1 is the superposition of:\n1. The in-phase current from the negative-resistance cross-coupled pair: $I_{\\text{cross}} = g_{m,\\text{cross}} V_1$\n2. The quadrature current from the coupling pair: $I_{\\text{coup}} = \\mp g_{m,\\text{coup}} V_2 = \\mp j g_{m,\\text{coup}} V_1$\n\n$$I_{\\text{total}} = (g_{m,\\text{cross}} \\mp j g_{m,\\text{coup}}) V_1$$\n\nThe phase angle $\\theta$ of this injected current with respect to $V_1$ is:\n$$\\tan\\theta = \\mp \\frac{g_{m,\\text{coup}}}{g_{m,\\text{cross}}} \\approx \\mp \\frac{I_1}{I_{SS}}$$\n\n#### Tank Phase Response:\nFor steady-state oscillation, the phase shift provided by the tank impedance $Z(j\\omega)$ must cancel the injected current's phase:\n$$\\angle Z(j\\omega) = -\\arctan \\left[ Q \\left( \\frac{\\omega}{\\omega_0} - \\frac{\\omega_0}{\\omega} \\right) \\right] = -\\theta$$\n\nEquating the tangents gives:\n$$Q \\left( \\frac{\\omega}{\\omega_0} - \\frac{\\omega_0}{\\omega} \\right) = \\pm \\frac{I_1}{I_{SS}}$$\n\n---\n\n### 4. Final Oscillation Frequency Estimate\n\n#### A. Narrow-Band Approximation ($\\Delta\\omega = \\omega - \\omega_0 \\ll \\omega_0$):\nSince $\\frac{\\omega}{\\omega_0} - \\frac{\\omega_0}{\\omega} \\approx \\frac{2\\Delta\\omega}{\\omega_0}$:\n\n$$2 Q \\frac{\\Delta\\omega}{\\omega_0} \\approx \\pm \\frac{I_1}{I_{SS}}$$\n\n$$\\omega \\approx \\omega_0 \\pm \\frac{\\omega_0}{2Q} \\frac{I_1}{I_{SS}} = \\omega_0 \\left( 1 \\pm \\frac{1}{2Q} \\frac{I_1}{I_{SS}} \\right)$$\n\nwhere $\\omega_0 = \\frac{1}{\\sqrt{LC}}$.\n\n#### B. Exact Expression:\nSolving the quadratic equation for $\\omega$:\n$$\\omega = \\omega_0 \\left[ \\sqrt{1 + \\left( \\frac{I_1}{2 Q I_{SS}} \\right)^2} \\pm \\frac{I_1}{2 Q I_{SS}} \\right]$$\n\n---\n\n### Summary\n- **Nominal/Uncoupled Frequency:** $\\omega_0 = \\frac{1}{\\sqrt{LC}}$\n- **Actual Oscillation Frequency:** \n$$\\omega \\approx \\frac{1}{\\sqrt{LC}} \\left( 1 \\pm \\frac{1}{2Q} \\frac{I_1}{I_{SS}} \\right)$$\n*(The $\\pm$ sign reflects the two possible stable oscillation modes corresponding to $V_1$ leading or lagging $V_2$ by $90^\\circ$.)*",
        "format": "markdown",
        "sha256": "9035ffe09f495cdf925aba9219eafeb51ccd2619bf34f24459161cad1da17fe4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the tank resonance and the coupling-induced shift, with the large-signal estimate Δω ≈ (I₁/I_SS)ω₀/(2Q). The two possible frequency directions and the additional exact expression are consistent with the estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 13147,
        "total_tokens": 14250,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 13147,
        "total_tokens": 14250,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **1. Circuit Identification**\n\nThe circuit is a **Parallel-Coupled Quadrature LC Oscillator (P-QVCO)**. It consists of two identical LC cross-coupled oscillators coupled in a feedback loop:\n- **Top Oscillator:** LC tank formed by inductors $L$ and total node capacitance $C$ at nodes $(X_1, Y_1)$, with a negative-resistance cross-coupled NMOS pair biased by tail current $I_{SS}$, and a coupling pair biased by tail current $I_1$.\n- **Bottom Oscillator:** Identical structure at nodes $(X_2, Y_2)$ with an LC tank, a cross-coupled pair biased by $I_{SS}$, and a coupling pair biased by $I_1$.\n- **Coupling Polarities:**\n  - Coupling from stage 2 to stage 1 is **inverting** (cross-connected: $Y_2 \\to$ left, $X_2 \\to$ right).\n  - Coupling from stage 1 to stage 2 is **non-inverting** (direct-connected: $X_1 \\to$ left, $Y_1 \\to$ right).\n\n---\n\n### **2. Condition for Quadrature Oscillation**\n\nDue to the single inversion in the coupling loop, the loop has a net phase shift of $180^\\circ$. For Barkhausen's phase criterion (total loop phase shift = $360^\\circ$), each stage must introduce an additional phase shift of $\\pm 90^\\circ$. \n\nAs a result, the two differential outputs oscillate in **quadrature**:\n$$V_2 = \\mp j V_1$$\n\nwhere $V_1 = V_{X1} - V_{Y1}$ and $V_2 = V_{X2} - V_{Y2}$.\n\n---\n\n### **3. Derivation of the Oscillation Frequency**\n\n#### **A. Small-Signal Admittance Analysis**\nLet $Y(j\\omega)$ be the admittance of each LC tank:\n$$Y(j\\omega) = \\frac{1}{R_p} + j\\left(\\omega C - \\frac{1}{\\omega L}\\right)$$\nwhere $R_p$ is the equivalent parallel resistance representing tank losses ($Q = R_p \\omega_0 C = \\frac{R_p}{\\omega_0 L}$ and $\\omega_0 = \\frac{1}{\\sqrt{LC}}$).\n\nApplying KCL at the differential nodes:\n$$\\begin{aligned}\nY(j\\omega) V_1 &= g_{m,SS} V_1 - g_{m1} V_2 \\\\\nY(j\\omega) V_2 &= g_{m,SS} V_2 + g_{m1} V_1\n\\end{aligned}$$\n\nSubstituting $V_2 = \\mp j V_1$:\n$$Y(j\\omega) = g_{m,SS} \\pm j g_{m1}$$\n\nEquating the real and imaginary parts:\n1. **Real Part:** $g_{m,SS} = \\frac{1}{R_p}$ (the core cross-coupled pair compensates for the tank losses).\n2. **Imaginary Part:**\n   $$\\omega C - \\frac{1}{\\omega L} = \\pm g_{m1}$$\n\nRewriting in terms of the uncoupled resonance frequency $\\omega_0 = \\frac{1}{\\sqrt{LC}}$ and quality factor $Q$:\n$$\\frac{\\omega}{\\omega_0} - \\frac{\\omega_0}{\\omega} = \\pm \\frac{g_{m1}}{\\omega_0 C} = \\pm \\frac{1}{Q} \\frac{g_{m1}}{g_{m,SS}}$$\n\n---\n\n#### **B. Large-Signal Current-Ratio Formulation**\nUnder large-signal switching, the current injected into the tank by the core pair is proportional to $I_{SS}$, and the current from the coupling pair is proportional to $I_1$. The required tank phase shift $\\phi$ satisfies:\n$$\\tan \\phi = \\pm \\frac{I_1}{I_{SS}}$$\n\nSince for an LC tank:\n$$\\tan \\phi = -Q \\left(\\frac{\\omega}{\\omega_0} - \\frac{\\omega_0}{\\omega}\\right)$$\n\nWe obtain:\n$$\\frac{\\omega}{\\omega_0} - \\frac{\\omega_0}{\\omega} = \\mp \\frac{1}{Q} \\frac{I_1}{I_{SS}}$$\n\n---\n\n### **4. Final Oscillation Frequency Expressions**\n\n#### **Exact Closed-Form Solution:**\nSolving the quadratic equation in $\\omega$:\n$$\\omega_{osc} = \\omega_0 \\left[ \\sqrt{1 + \\left(\\frac{I_1}{2 Q I_{SS}}\\right)^2} \\pm \\frac{I_1}{2 Q I_{SS}} \\right]$$\n\n#### **First-Order Linear Approximation** (for $\\frac{I_1}{2 Q I_{SS}} \\ll 1$):\n$$\\omega_{osc} \\approx \\omega_0 \\left( 1 \\pm \\frac{1}{2Q} \\frac{I_1}{I_{SS}} \\right)$$\n\nor in terms of small-signal parameters:\n$$\\omega_{osc} \\approx \\omega_0 \\pm \\frac{g_{m1}}{2C}$$\n\n---\n\n### **Summary of Parameters**\n- $\\omega_0 = \\frac{1}{\\sqrt{LC}}$: Uncoupled tank resonant frequency.\n- $C$: Total capacitance at each output node (including parasitic capacitances).\n- $Q$: Quality factor of the LC tank.\n- The $\\pm$ sign reflects the two possible modes of oscillation (frequency deviation above or below $\\omega_0$, corresponding to the quadrature phase relationship of $V_2$ leading or lagging $V_1$).",
        "format": "markdown",
        "sha256": "d32ec155421484a874da358dfb2a6d7bbc9165463fb78669604b2573047f20ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the tank resonance and the coupling-induced shift proportional to (I1/ISS)ω0/(2Q), including the two possible frequency directions. The gm/(2C) expression follows from the stated tank-loss compensation condition, so it does not undermine the correct estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 8048,
        "total_tokens": 9151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6773,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 8048,
        "total_tokens": 9151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6773,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    }
  ]
}
