{
  "model_key": "gemini_38_flash",
  "display_name": "Gemini 3.8 Flash",
  "provider": "google",
  "evaluation_model_ids": [],
  "thinking_effort": "high",
  "configuration_note": "Gemini 3.8 Flash answered the 50 tasks in three rollouts through OpenRouter's chat completions route (google/gemini-3.8-flash) at reasoning effort high, the highest it offers. Requests set temperature to 0 and max_tokens to 65,536, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Gemini 3.8 Flash on 2026-11-10 ($0.825 input, $0.0825 cached input, $4.125 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 117,
          "incorrect_count": 33,
          "partial_credit_count": 33,
          "zero_count": 0,
          "mean_score_0_to_4": 3.546666666666667,
          "score_percent": 88.66666666666667,
          "score_distribution": {
            "1": 11,
            "2": 13,
            "3": 9,
            "4": 117
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 117,
          "incorrect_count": 33,
          "partial_credit_count": 33,
          "zero_count": 0,
          "mean_score_0_to_4": 3.546666666666667,
          "score_percent": 88.66666666666667,
          "score_distribution": {
            "1": 11,
            "2": 13,
            "3": 9,
            "4": 117
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 87,
          "incorrect_count": 3,
          "partial_credit_count": 3,
          "zero_count": 0,
          "mean_score_0_to_4": 3.9444444444444446,
          "score_percent": 98.61111111111111,
          "score_distribution": {
            "2": 2,
            "3": 1,
            "4": 87
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 87,
          "incorrect_count": 3,
          "partial_credit_count": 3,
          "zero_count": 0,
          "mean_score_0_to_4": 3.9444444444444446,
          "score_percent": 98.61111111111111,
          "score_distribution": {
            "2": 2,
            "3": 1,
            "4": 87
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 30,
          "incorrect_count": 30,
          "partial_credit_count": 30,
          "zero_count": 0,
          "mean_score_0_to_4": 2.95,
          "score_percent": 73.75,
          "score_distribution": {
            "1": 11,
            "2": 11,
            "3": 8,
            "4": 30
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 30,
          "incorrect_count": 30,
          "partial_credit_count": 30,
          "zero_count": 0,
          "mean_score_0_to_4": 2.95,
          "score_percent": 73.75,
          "score_distribution": {
            "1": 11,
            "2": 11,
            "3": 8,
            "4": 30
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 38,
        "incorrect_count": 12,
        "partial_credit_count": 12,
        "zero_count": 0,
        "mean_score_0_to_4": 3.54,
        "score_percent": 88.5,
        "score_distribution": {
          "1": 3,
          "2": 5,
          "3": 4,
          "4": 38
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 40,
        "incorrect_count": 10,
        "partial_credit_count": 10,
        "zero_count": 0,
        "mean_score_0_to_4": 3.56,
        "score_percent": 89.0,
        "score_distribution": {
          "1": 4,
          "2": 4,
          "3": 2,
          "4": 40
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 39,
        "incorrect_count": 11,
        "partial_credit_count": 11,
        "zero_count": 0,
        "mean_score_0_to_4": 3.54,
        "score_percent": 88.5,
        "score_distribution": {
          "1": 4,
          "2": 4,
          "3": 3,
          "4": 39
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 0,
        "input_tokens": 159516,
        "output_tokens": 1733392,
        "total_tokens": 1892908
      },
      "known_totals": {
        "cached_input_tokens": 0,
        "input_tokens": 159516,
        "output_tokens": 1733392,
        "total_tokens": 1892908
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.933333333333333,
          "score_percent": 98.33333333333333,
          "score_distribution": {
            "2": 1,
            "4": 29
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.933333333333333,
          "score_percent": 98.33333333333333,
          "score_distribution": {
            "2": 1,
            "4": 29
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.966666666666667,
          "score_percent": 99.16666666666667,
          "score_distribution": {
            "3": 1,
            "4": 29
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 9,
          "incorrect_count": 11,
          "partial_credit_count": 11,
          "zero_count": 0,
          "mean_score_0_to_4": 2.95,
          "score_percent": 73.75,
          "score_distribution": {
            "1": 3,
            "2": 4,
            "3": 4,
            "4": 9
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 11,
          "incorrect_count": 9,
          "partial_credit_count": 9,
          "zero_count": 0,
          "mean_score_0_to_4": 3.0,
          "score_percent": 75.0,
          "score_distribution": {
            "1": 4,
            "2": 3,
            "3": 2,
            "4": 11
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 10,
          "incorrect_count": 10,
          "partial_credit_count": 10,
          "zero_count": 0,
          "mean_score_0_to_4": 2.9,
          "score_percent": 72.5,
          "score_distribution": {
            "1": 4,
            "2": 4,
            "3": 2,
            "4": 10
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, its **intrinsic gain approximately doubles** (increases by a factor of **2**, or about **$+6\\text{ dB}$**), assuming the bias current ($I_D$) is kept constant.\n\n---\n\n### Step-by-Step Explanation:\n\n#### 1. Definition of Intrinsic Gain\nThe intrinsic gain ($A_i$) represents the maximum possible voltage gain of a single transistor and is given by:\n$$A_i = g_m \\cdot r_o$$\n\nwhere:\n* $g_m$ is the transconductance.\n* $r_o$ is the output resistance.\n\n---\n\n#### 2. Effect on Transconductance ($g_m$)\nThe transconductance in the saturation region is:\n$$g_m = \\sqrt{2 \\mu C_{ox} \\left(\\frac{W}{L}\\right) I_D}$$\n\n* Since both $W$ and $L$ are doubled:\n  $$\\frac{W_{new}}{L_{new}} = \\frac{2W}{2L} = \\frac{W}{L}$$\n* Because the aspect ratio $\\frac{W}{L}$ remains unchanged, **$g_m$ remains unchanged** (assuming a constant bias current $I_D$).\n\n---\n\n#### 3. Effect on Output Resistance ($r_o$)\nThe output resistance accounts for channel-length modulation:\n$$r_o \\approx \\frac{1}{\\lambda I_D} = \\frac{V_A}{I_D}$$\n\n* The channel-length modulation parameter ($\\lambda$) is inversely proportional to the channel length: $\\lambda \\propto \\frac{1}{L}$ (or equivalently, the Early voltage $V_A \\propto L$).\n* Since $L$ is doubled ($L \\to 2L$), the parameter $\\lambda$ is halved ($\\lambda \\to \\frac{\\lambda}{2}$).\n* Consequently, **$r_o$ doubles**:\n  $$r_{o, new} = 2 \\cdot r_o$$\n\n---\n\n#### 4. Resulting Intrinsic Gain\nCombining the two components:\n$$A_{i, new} = g_{m, new} \\cdot r_{o, new} = g_m \\cdot (2 r_o) = 2 (g_m r_o) = 2 A_i$$\n\n### Summary\n* **$W/L$ ratio:** Unchanged\n* **Transconductance ($g_m$):** Unchanged\n* **Output Resistance ($r_o$):** Doubles ($\\times 2$)\n* **Intrinsic Gain ($A_i$):** **Doubles ($\\times 2$)**",
        "format": "markdown",
        "sha256": "38335654205b4cb5ed09760062406a5df9f93908768328659a8454f1f241a2e7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes intrinsic gain doubles: W/L and gm remain approximately unchanged, while doubling L reduces channel-length modulation and doubles ro. The stated constant-current assumption is consistent with the golden solution's constant-overdrive case.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2052,
        "total_tokens": 2071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1459,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2052,
        "total_tokens": 2071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1459,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To a first-order approximation, the intrinsic gain of the MOSFET **doubles (increases by a factor of 2, or by $\\approx 6\\text{ dB}$)**, assuming the bias current ($I_D$) or the overdrive voltage ($V_{GS} - V_{TH}$) is kept constant.\n\nHere is the step-by-step mathematical reasoning:\n\n---\n\n### 1. Definition of Intrinsic Gain\nThe intrinsic gain ($A_{v0}$) is the maximum achievable voltage gain of a single transistor:\n$$A_{v0} = g_m \\cdot r_o$$\n\nwhere:\n* $g_m$ is the transconductance.\n* $r_o$ is the small-signal output resistance.\n\n---\n\n### 2. Effect on Transconductance ($g_m$)\nThe transconductance depends on the aspect ratio ($W/L$) and the bias point:\n$$g_m = \\sqrt{2\\mu_n C_{ox} \\left(\\frac{W}{L}\\right) I_D} = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)(V_{GS} - V_{TH})$$\n\nWhen you double both $W$ and $L$:\n$$\\frac{W_{new}}{L_{new}} = \\frac{2W}{2L} = \\frac{W}{L}$$\n\nSince the aspect ratio $\\frac{W}{L}$ remains unchanged:\n* **$g_m$ remains constant** (assuming $I_D$ or $V_{GS} - V_{TH}$ is fixed).\n\n---\n\n### 3. Effect on Output Resistance ($r_o$)\nOutput resistance is inversely proportional to channel-length modulation ($\\lambda$):\n$$r_o = \\frac{1}{\\lambda I_D} = \\frac{V_A}{I_D}$$\n\nThe Early voltage ($V_A$) is proportional to the channel length:\n$$V_A \\propto L \\implies \\lambda \\propto \\frac{1}{L}$$\n\nTherefore:\n$$r_o \\propto \\frac{L}{I_D}$$\n\nSince the length doubles ($L \\to 2L$):\n* **$r_o$ doubles ($r_{o, new} = 2 r_o$)**.\n\n---\n\n### 4. Combined Result\nMultiplying the two:\n$$A_{v0, new} = g_{m, new} \\cdot r_{o, new} = g_m \\cdot (2 r_o) = 2 \\cdot A_{v0}$$\n\n---\n\n### Practical Note (Short-Channel / Modern Technologies)\nIn modern sub-micron processes, short-channel effects like **DIBL** (Drain-Induced Barrier Lowering) degrade $r_o$ significantly at minimum lengths. Doubling $L$ suppresses DIBL considerably, meaning $r_o$ may actually increase by **more than a factor of 2**, leading to an even greater increase in intrinsic gain.",
        "format": "markdown",
        "sha256": "ef0888328552252e1361885c89d8ece6b758a53e496f79836205479aea12359f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with W/L and the specified bias conditions unchanged, gm stays approximately constant while ro increases with L. The practical note is a qualified secondary caveat and does not undermine the main result.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2406,
        "total_tokens": 2425,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2406,
        "total_tokens": 2425,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, its **intrinsic gain approximately doubles** (increases by a factor of 2, or **+6 dB**), assuming the bias current ($I_D$) or gate overdrive voltage ($V_{GS} - V_{th}$) is kept constant.\n\nHere is the step-by-step breakdown:\n\n### 1. Definition of Intrinsic Gain\nThe intrinsic gain ($A_0$) of a MOSFET in the saturation region is the maximum voltage gain achievable by a single transistor, defined as:\n$$A_0 = g_m \\cdot r_o$$\nwhere:\n* $g_m$ is the transconductance.\n* $r_o$ is the output resistance.\n\n---\n\n### 2. Effect on Transconductance ($g_m$)\nThe aspect ratio of the transistor is:\n$$\\left(\\frac{W}{L}\\right)_{\\text{new}} = \\frac{2W}{2L} = \\frac{W}{L}$$\n\nSince the aspect ratio remains unchanged:\n* **At a constant drain current ($I_D$):** \n  $$g_m = \\sqrt{2\\mu C_{ox}\\left(\\frac{W}{L}\\right)I_D}$$\n  Because $W/L$ and $I_D$ are unchanged, **$g_m$ remains constant**.\n\n* **At a constant overdrive voltage ($V_{ov} = V_{GS} - V_{th}$):** \n  $$g_m = \\mu C_{ox}\\left(\\frac{W}{L}\\right)V_{ov}$$\n  $g_m$ still **remains constant**.\n\n---\n\n### 3. Effect on Output Resistance ($r_o$)\nThe output resistance is governed by channel-length modulation:\n$$r_o \\approx \\frac{1}{\\lambda I_D} = \\frac{V_A}{I_D}$$\n\n* The channel-length modulation parameter $\\lambda$ is inversely proportional to length ($\\lambda \\propto \\frac{1}{L}$).\n* Equivalently, the Early voltage $V_A$ is directly proportional to length ($V_A \\propto L$).\n\nWhen you double the length ($L \\to 2L$):\n* $\\lambda$ is halved ($\\lambda \\to \\frac{\\lambda}{2}$).\n* Therefore, the output resistance **doubles**:\n  $$r_{o,\\text{new}} \\approx 2 r_o$$\n\n---\n\n### 4. Combined Effect on Intrinsic Gain\nSubstituting these back into the gain equation:\n$$A_{0,\\text{new}} = g_{m,\\text{new}} \\times r_{o,\\text{new}} = (g_m) \\times (2 r_o) = 2 (g_m r_o) = 2 A_0$$\n\n### Trade-off Summary\nWhile you gain a **$2\\times$ increase in intrinsic gain**, the trade-off is an increase in total gate area ($W \\times L$ quadruples), which quadruples parasitic capacitances ($C_{gs}, C_{gd}$) and significantly reduces the speed/bandwidth ($f_T$) of the transistor.",
        "format": "markdown",
        "sha256": "92fb676b46318365776f9e6f1be0e8c607914774cebb4effe961cdc202768ed6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions leaves W/L, gm, and approximately ID unchanged, while the longer channel increases ro by about 2×, so intrinsic gain doubles. The added bandwidth discussion is peripheral to the question.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1988,
        "total_tokens": 2007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1290,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1988,
        "total_tokens": 2007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1290,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both students can be correct**, depending on what is being held constant. This is a classic dilemma in analog CMOS design.\n\nThe transconductance ($g_m$) of a MOSFET in saturation (using the square-law model) can be expressed in different ways:\n\n---\n\n### 1. Student A is correct if the **device dimensions ($W/L$) are held constant**:\nIf you take an existing transistor with a fixed width ($W$) and length ($L$) and increase the gate-to-source voltage (thus increasing $V_{ov} = V_{GS} - V_{th}$):\n\n$$g_m = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) V_{ov}$$\n\n* **Conclusion:** $g_m \\propto V_{ov}$. As overdrive voltage increases, the drain current $I_D$ increases quadratically, and **transconductance goes up**.\n\n---\n\n### 2. Student B is correct if the **bias current ($I_D$) is held constant**:\nIn circuit design, you often have a fixed current/power budget. If you hold $I_D$ constant and change the overdrive voltage (which requires resizing the transistor, i.e., changing $W/L$):\n\n$$g_m = \\frac{2 I_D}{V_{ov}}$$\n\n* **Conclusion:** $g_m \\propto \\frac{1}{V_{ov}}$. To increase $V_{ov}$ while keeping current constant, you must make the transistor narrower ($W$ smaller), which causes **transconductance to go down**.\n\n---\n\n### Summary:\n* **Student A** is thinking like a test engineer measuring a single, fixed transistor on a bench: **$W/L$ is fixed $\\rightarrow g_m$ increases**.\n* **Student B** is thinking like an analog circuit designer working under a fixed power budget: **$I_D$ is fixed $\\rightarrow g_m$ decreases**.",
        "format": "markdown",
        "sha256": "17ff9f3f4a06f74ce0a05e09c5bb856287d13a2a8ca33d573edecf70e73aac27"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed W/L, where gm increases with Vov, and explains that Student B is right only when ID is fixed and device size changes.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 1719,
        "total_tokens": 1749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1300,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 1719,
        "total_tokens": 1749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1300,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both students can be correct depending on **what is held constant**. \n\nHere is how both perspectives are derived using the standard square-law model for a MOSFET in the saturation region:\n\n---\n\n### **1. Student A is correct if the transistor dimensions ($W/L$) are kept constant:**\nIf you take a specific, already-fabricated MOSFET (where the width $W$ and length $L$ are fixed) and increase the gate-to-source overdrive voltage ($V_{ov} = V_{GS} - V_{TH}$):\n\n$$g_m = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) V_{ov}$$\n\n* **Conclusion:** $g_m \\propto V_{ov}$. As the overdrive voltage increases, the transconductance **increases**. (Note that the drain current $I_D$ also increases as $V_{ov}^2$).\n\n---\n\n### **2. Student B is correct if the drain current ($I_D$) is kept constant:**\nIn analog circuit design, you often have a fixed current budget (a fixed $I_D$). In that case, to change $V_{ov}$, you have to resize the transistor (change $W/L$). \n\nUsing the relationship:\n$$g_m = \\frac{2I_D}{V_{ov}}$$\n\n* **Conclusion:** $g_m \\propto \\frac{1}{V_{ov}}$. For a given constant bias current, increasing the overdrive voltage (by making the transistor narrower) causes the transconductance to go **down**.\n\n---\n\n### **Summary**\n* **Student A** is thinking from a **fixed device size** perspective ($W/L$ is constant).\n* **Student B** is thinking from a **fixed bias current** perspective ($I_D$ is constant). \n\n*(Note: In real short-channel devices with fixed $W/L$, severe vertical field mobility degradation can also cause $g_m$ to eventually roll off and decrease at very high overdrive voltages, giving Student B another practical scenario).*",
        "format": "markdown",
        "sha256": "761eef1817ea8c36e3d1fe06136288ea17cfedc2a8f7599639a58a5de1a0cb55"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed W/L and explains that ID rises with Vov; Student B's relation applies when ID is held fixed. The extra short-channel caveat does not change the essential answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 1639,
        "total_tokens": 1669,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1202,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 1639,
        "total_tokens": 1669,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1202,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both students can be correct**, depending on what parameter is held constant. This is a classic question in analog CMOS design.\n\nHere is the breakdown of why both can be right:\n\n---\n\n### **1. Student A is correct if the transistor dimensions ($W/L$) are held constant.**\nIf you have an already-fabricated MOSFET (where the width $W$ and length $L$ are fixed) and you simply increase the gate voltage to increase the overdrive voltage ($V_{ov} = V_{GS} - V_{th}$):\n\n$$g_m = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) V_{ov}$$\n\n* **Conclusion:** $g_m \\propto V_{ov}$. As the overdrive voltage goes up, **transconductance increases**. (The drain current $I_D$ also increases quadratically).\n\n---\n\n### **2. Student B is correct if the drain current ($I_D$) is held constant.**\nIn analog circuit design, you often have a fixed power budget, meaning the drain current $I_D$ is fixed by a bias current source. To increase $V_{ov}$ while keeping $I_D$ constant, you must reduce the device width ($W$):\n\n$$g_m = \\frac{2 I_D}{V_{ov}}$$\n\n* **Conclusion:** $g_m \\propto \\frac{1}{V_{ov}}$. For a given current, as the overdrive voltage goes up, **transconductance decreases**.\n\n---\n\n### Summary\n* **Student A** is thinking from a **fixed device size** perspective ($W/L = \\text{const}$).\n* **Student B** is thinking from a **fixed bias current** perspective ($I_D = \\text{const}$).",
        "format": "markdown",
        "sha256": "0c47e78e970c7e2b379125c7ac7341543d2964340f21620e73268de8aa17a9aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed W/L, explains that gm increases with Vov, and accurately states Student B’s result for fixed ID.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 1772,
        "total_tokens": 1802,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 1772,
        "total_tokens": 1802,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the small-signal model of a PMOS device is topologically and mathematically identical to that of an NMOS device.**\n\nIn circuit analysis, you can replace a PMOS transistor with the exact same small-signal equivalent circuit (same current source direction, same controlling voltage polarities) as an NMOS transistor.\n\n---\n\n### Why are they identical?\n\nAt DC (large-signal), NMOS and PMOS operate with opposite polarities:\n* **NMOS:** Current flows from **Drain to Source** ($I_D$), and turns on when $V_G$ increases relative to $V_S$ ($V_{GS} > V_{TH,n}$).\n* **PMOS:** Current flows from **Source to Drain** ($I_{SD}$), and turns on when $V_G$ decreases relative to $V_S$ ($V_{SG} > |V_{TH,p}|$).\n\nBecause of this, it is intuitive to think the small-signal current arrow should flip for a PMOS. However, consider what happens to small perturbations (AC signals):\n\n1. **In an NMOS:**\n   * If the gate voltage increases slightly ($+v_{gs}$), the channel conducts more.\n   * Small-signal current **increases from Drain to Source**: \n     $$i_d = g_m v_{gs}$$\n\n2. **In a PMOS:**\n   * If the gate voltage increases slightly ($+v_g$), $V_{SG}$ *decreases*, so the transistor turns **off** slightly.\n   * The DC current flowing from **Source to Drain** *decreases*.\n   * In circuit theory, a *decrease* in current flowing from Source to Drain is mathematically equivalent to an *increase* in current flowing from **Drain to Source**.\n   * Therefore, a positive $v_{gs}$ still results in a current of $g_m v_{gs}$ directed from **Drain to Source**.\n\nBecause both the direction of the controlling voltage and the direction of the current change invert together, the two negative signs cancel out:\n$$i_{sd} = g_m v_{sg} \\implies -i_{ds} = g_m (-v_{gs}) \\implies i_{ds} = g_m v_{gs}$$\n\n---\n\n### The Small-Signal Model Elements\n\nFor both NMOS and PMOS, the low-frequency hybrid-$\\pi$ model consists of:\n* **Gate terminal:** An open circuit (infinite input impedance at low frequencies).\n* **Dependent current source:** Connected between Drain and Source, pointing **from Drain to Source**, with a value equal to:\n  $$i_d = g_m v_{gs}$$\n  *(Alternatively, you can draw it pointing from Source to Drain with value $g_m v_{sg}$—both are identical).*\n* **Output resistance ($r_o$):** Connected in parallel between Drain and Source to model channel-length modulation ($\\lambda$):\n  $$r_o = \\frac{1}{\\lambda I_D} \\approx \\frac{V_A}{I_D}$$\n* **Body effect ($g_{mb}$):** If the body is not tied to the source, a second current source is placed in parallel from Drain to Source:\n  $$i_{d,body} = g_{mb} v_{bs}$$\n\n---\n\n### Where NMOS and PMOS Differ\n\nWhile the **schematic representation** is identical, the **numerical parameter values** differ due to underlying physics:\n\n1. **Transconductance ($g_m$):** Hole mobility ($\\mu_p$) is 2 to 3 times lower than electron mobility ($\\mu_n$). For the same dimensions ($W/L$) and bias current, a PMOS device will have a lower $g_m$:\n   $$g_m = \\sqrt{2\\mu C_{ox}\\left(\\frac{W}{L}\\right)I_D}$$\n2. **Capacitances ($C_{gs}, C_{gd}$):** To achieve the same $g_m$ or current drive as an NMOS, a PMOS must typically be made 2 to 3 times wider ($W$), which increases its parasitic small-signal capacitances.",
        "format": "markdown",
        "sha256": "9ef483c3b31e2e5854f48005d949d382c944ebe3f044f256c1e0a9bc07f8bd3a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly answers yes: the PMOS small-signal model has the same form as the NMOS model when current and voltage polarities are used consistently. Its parameter values may differ, but that does not change the model structure.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2941,
        "total_tokens": 2962,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2039,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2941,
        "total_tokens": 2962,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2039,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, topologically and mathematically, the small-signal model of a PMOS device is identical to that of an NMOS device.**\n\nOnce a transistor is biased in the saturation region and linearized around its DC operating point, all DC polarities disappear. Both NMOS and PMOS devices share the exact same equivalent circuit between their terminals (Gate, Drain, Source, and Body).\n\n---\n\n### Why are they identical?\n\nConsider the voltage-controlled current source that defines the transistor's transconductance ($g_m$):\n\n1. **For an NMOS:**\n   * If the gate voltage increases ($v_{gs} > 0$), the channel conductivity increases.\n   * More current flows from **Drain to Source**.\n   * Small-signal current: $i_{ds} = g_m v_{gs}$ (directed from Drain to Source).\n\n2. **For a PMOS:**\n   * If the gate voltage increases ($v_g \\uparrow$), the source-to-gate voltage decreases ($v_{sg} \\downarrow$).\n   * The PMOS conducts **less** current from Source to Drain.\n   * A *decrease* in current flowing from Source to Drain is mathematically equivalent to an *increase* in current flowing from **Drain to Source**.\n   * Small-signal current: $i_{ds} = g_m v_{gs}$ (directed from Drain to Source).\n\nAlternatively, you can draw the PMOS current source pointing from **Source to Drain** with a value of $g_m v_{sg}$. Since $v_{sg} = -v_{gs}$, both representations are algebraically identical:\n$$g_m v_{gs} \\text{ (Drain to Source)} \\equiv g_m v_{sg} \\text{ (Source to Drain)}$$\n\n---\n\n### The Small-Signal Components\n\nFor both NMOS and PMOS:\n* **Transconductance current source:** $g_m v_{gs}$ (pointing from Drain to Source)\n* **Output resistance:** $r_o = \\frac{1}{\\lambda I_D} = \\frac{\\left|V_A\\right|}{I_D}$ (connected between Drain and Source)\n* **Body-effect current source:** $g_{mb} v_{bs}$ (pointing from Drain to Source)\n* **Parasitic capacitances:** $C_{gs}, C_{gd}, C_{db}, C_{sb}$ all connect between the exact same respective terminals.\n\n---\n\n### What *is* different between them?\n\nWhile the **structure** of the model is identical, the following differ:\n\n1. **Parameter Values:**\n   * Because electron mobility ($\\mu_n$) is roughly $2$ to $3$ times higher than hole mobility ($\\mu_p$), an NMOS will have a significantly higher $g_m$ and lower $r_o$ than a PMOS of the same dimensions ($W/L$) and bias current ($I_D$).\n2. **DC Operating Conditions:**\n   * The conditions required to ensure the device is in saturation (and thus validate the small-signal model) have opposite polarities:\n     * **NMOS:** $V_{GS} > V_{TH,n}$ and $V_{DS} \\ge V_{GS} - V_{TH,n}$\n     * **PMOS:** $V_{SG} > |V_{TH,p}|$ and $V_{SD} \\ge V_{SG} - |V_{TH,p}|$\n3. **Substrate (Body) Connection:**\n   * In standard CMOS processes, the NMOS body is typically tied to the lowest potential (e.g., $\\text{GND}$), whereas the PMOS body is tied to the highest potential (e.g., $V_{DD}$). In small-signal analysis, both of these DC rails are treated as AC grounds.",
        "format": "markdown",
        "sha256": "79ead4abbf16f55c901a45ca95a0f31b7b8afa1ed49955d33540770259201f90"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer correctly says the PMOS small-signal model has the same form as the NMOS model. The golden solution awards full credit for this conclusion; its polarity discussion is consistent with using signed terminal variables.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 3004,
        "total_tokens": 3025,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 3004,
        "total_tokens": 3025,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the small-signal model of a PMOS device is topologically and mathematically identical to that of an NMOS device.**\n\nWhile NMOS and PMOS transistors operate with opposite DC voltage polarities and opposite directions of DC current, their **linearized small-signal behavior (AC)** is represented by the exact same equivalent circuit.\n\n---\n\n### Why are they identical?\n\nA small-signal model represents the **derivatives** (rates of change) around a DC operating point. \n\n1. **For an NMOS:**\n   * If the gate voltage increases ($+v_{gs}$), the channel enhances, and current from **Drain to Source** increases.\n   * Therefore, the dependent current source is $g_m v_{gs}$, directed from **Drain to Source**.\n\n2. **For a PMOS:**\n   * If the gate voltage increases ($+v_{gs}$), the source-to-gate voltage decreases ($-v_{sg}$). \n   * This reduces the inversion layer, causing the DC current flowing from **Source to Drain** to *decrease*.\n   * In small-signal terms, a *decrease* in current flowing from Source to Drain is mathematically identical to a current flowing from **Drain to Source**.\n   * Therefore, the dependent current source is also $g_m v_{gs}$, directed from **Drain to Source**.\n\nBecause of this \"double negative,\" the equations yield the same result:\n$$i_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}$$\n\n---\n\n### The Standard Hybrid-$\\pi$ Model (Identical for Both)\n\nFor both NMOS and PMOS:\n* **Input (Gate–Source):** Open circuit at low frequencies (or capacitors $C_{gs}, C_{gd}$ at high frequencies).\n* **Controlled Current Source:** Points from **Drain to Source** with a value of $g_m v_{gs}$.\n* **Output Resistance ($r_o$):** Connected between **Drain and Source**.\n* **Body Effect (if applicable):** Controlled current source pointing from **Drain to Source** with a value of $g_{mb} v_{bs}$.\n\n*(Note: Some textbooks choose to draw the PMOS current source pointing from Source to Drain with a value of $g_m v_{sg}$. Since $v_{sg} = -v_{gs}$, reversing both the arrow direction and the sign of the controlling voltage results in the exact same electrical circuit).*\n\n---\n\n### Important Practical Differences\n\nEven though the **schematic model** is identical, you must keep two practical distinctions in mind during analysis:\n\n1. **Parameter Values ($\\mu_n$ vs. $\\mu_p$):**\n   * Electron mobility ($\\mu_n$) is roughly $2$ to $4$ times higher than hole mobility ($\\mu_p$).\n   * For identical dimensions ($W/L$) and bias currents, a PMOS will have a smaller transconductance ($g_m$) and different parasitic capacitances compared to an NMOS.\n\n2. **Body Terminal (Bulk Connection):**\n   * In a standard digital/analog CMOS process (which uses a shared p-type substrate and individual N-wells), the **PMOS** body can easily be connected to its own source terminal, eliminating the body effect ($g_{mb} = 0$).\n   * The **NMOS** body is often tied to the lowest chip potential (GND/VSS), meaning NMOS devices frequently exhibit body effect ($g_{mb} \\neq 0$) if their source is not at ground.",
        "format": "markdown",
        "sha256": "071aab5dd22c45fe1e8ca123dadc181f491c00b0b5d52a67b447ce5fe3b14e05"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model and gives a consistent polarity convention; this earns full credit under the golden solution.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2489,
        "total_tokens": 2510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1730,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2489,
        "total_tokens": 2510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1730,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find and sketch the relationship between $I_X$ and $V_X$, we analyze the operating conditions of the NMOS transistor $M_1$.\n\n---\n\n### **1. Circuit Analysis**\n\n* **Terminal Voltages:**\n  * Source: $V_S = 0\\text{ V}$ (ground)\n  * Gate: $V_G = V_X$\n  * Drain: $V_D = V_X$\n* Therefore:\n  * $V_{GS} = V_G - V_S = V_X$\n  * $V_{DS} = V_D - V_S = V_X$\n\n* **Current:**\n  * Assuming an ideal MOS gate, the gate current is zero ($I_G = 0$).\n  * The source current $I_X$ entering the node is equal to the drain current:\n    $$I_X = I_D$$\n\n---\n\n### **2. Operating Regions (for $V_X \\ge 0$)**\n\n1. **Cutoff Region ($0 \\le V_X \\le V_{TH}$):**\n   * Since $V_{GS} = V_X \\le V_{TH}$, the channel is not formed and the transistor is **OFF**.\n   * Therefore:\n     $$I_X = 0$$\n\n2. **Saturation Region ($V_X > V_{TH}$):**\n   * For the transistor to be in saturation, it must satisfy:\n     $$V_{DS} \\ge V_{GS} - V_{TH}$$\n   * Substituting $V_{DS} = V_X$ and $V_{GS} = V_X$:\n     $$V_X \\ge V_X - V_{TH} \\implies 0 \\ge -V_{TH}$$\n   * Since the threshold voltage $V_{TH} > 0$, this condition is **always satisfied**. Thus, the transistor operates exclusively in the **saturation region** whenever it is on (it never enters the triode region).\n   * Neglecting channel-length modulation ($\\lambda = 0$):\n     $$I_X = I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2 = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n\n---\n\n### **3. Summary of Equations**\n\n$$I_X = \\begin{cases} \n0, & V_X \\le V_{TH} \\\\ \n\\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2, & V_X > V_{TH} \n\\end{cases}$$\n\n*(If channel-length modulation $\\lambda$ is included, the current becomes $I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2(1 + \\lambda V_X)$, which grows slightly faster than purely quadratic).*\n\n---\n\n### **4. Sketch of $I_X$ vs. $V_X$**\n\n```text\n       IX\n        ^\n        |                                      . ' (Quadratic: ~ (Vx - Vth)^2)\n        |                                  . '\n        |                              . '\n        |                           . '\n        |                        . '\n        |                     . '\n        |                 . '\n        |           _ . '\n        +---------+-----------------------------> VX\n        0        VTH\n```\n\n### **Key Features of the Plot:**\n* **$V_X < V_{TH}$:** $I_X$ remains strictly **$0$** (flat along the horizontal axis).\n* **At $V_X = V_{TH}$:** The transistor begins to conduct; the slope $\\frac{dI_X}{dV_X}$ starts at $0$ at this point.\n* **$V_X > V_{TH}$:** $I_X$ increases **quadratically (parabolically)** with $V_X$.",
        "format": "markdown",
        "sha256": "5d47b2fb18bf3c678c5de08d73ac872807b5c9d5953faf7cfd2a57ef31af9a33"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS as off up to threshold and in saturation above threshold, giving the required quadratic rise in IX. The optional channel-length-modulation note does not affect the result.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3001,
        "total_tokens": 4117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2083,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3001,
        "total_tokens": 4117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2083,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch $I_X$ versus $V_X$, we analyze the operating regions of the transistor $M_1$ as $V_X$ varies.\n\n---\n\n### 1. Circuit Analysis and Terminal Voltages\n\n* **Transistor Type:** Enhancement-mode NMOS transistor with threshold voltage $V_{TH} > 0$.\n* **Source:** Connected to ground $\\implies V_S = 0\\text{ V}$.\n* **Gate and Drain:** Tied together to the voltage source $V_X$ $\\implies V_G = V_D = V_X$.\n* Therefore:\n  $$V_{GS} = V_X$$\n  $$V_{DS} = V_X$$\n\nSince the gate is connected directly to the drain, $M_1$ is in a **diode-connected** configuration.\n\n---\n\n### 2. Regions of Operation\n\n#### Region 1: Cutoff ($V_X < V_{TH}$)\n* When the gate-to-source voltage is less than the threshold voltage:\n  $$V_{GS} = V_X < V_{TH}$$\n* The channel does not form, so the transistor remains **OFF**:\n  $$I_X = 0$$\n\n---\n\n#### Region 2: Saturation ($V_X \\ge V_{TH}$)\n* For the transistor to be in saturation, it must satisfy:\n  $$V_{DS} \\ge V_{GS} - V_{TH}$$\n* Substituting $V_{DS} = V_X$ and $V_{GS} = V_X$:\n  $$V_X \\ge V_X - V_{TH} \\implies 0 \\ge -V_{TH} \\implies V_{TH} \\ge 0$$\n* Since $V_{TH} > 0$ for an enhancement-mode NMOS, this condition is **always satisfied** as long as $V_X \\ge V_{TH}$. Therefore, the transistor **never enters the triode (linear) region**; it operates strictly in **saturation** once turned on.\n\n* Neglecting channel-length modulation ($\\lambda = 0$):\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2 = \\frac{1}{2}\\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n\n* If channel-length modulation ($\\lambda > 0$) is included:\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2 (1 + \\lambda V_X)$$\n\n---\n\n### 3. Key Characteristics of the Curve\n\n1. **Threshold Point:** $I_X = 0$ for all $0 \\le V_X \\le V_{TH}$.\n2. **Turn-on:** Current starts to flow at $V_X = V_{TH}$.\n3. **Curvature:** For $V_X > V_{TH}$, $I_X$ increases **quadratically** (parabolic curve).\n4. **Slope:** The small-signal conductance (slope) is:\n   $$\\frac{dI_X}{dV_X} = g_m = \\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})$$\n   The slope starts at $0$ at $V_X = V_{TH}$ and increases linearly with $V_X$.\n\n---\n\n### 4. Sketch of $I_X$ vs. $V_X$\n\n```text\n       IX\n        ^\n        |                                       /\n        |                                      /  (Parabolic: IX ∝ (VX - VTH)²)\n        |                                    .'\n        |                                  .'\n        |                                _/\n        |                              .'\n        |                           _.'\n        |                        _.'\n        +-----------------------+---------------------> VX\n       0                       VTH\n        <----- Cutoff ---------><--- Saturation ---->\n               (IX = 0)\n```",
        "format": "markdown",
        "sha256": "8120a541514d79a8cfa622ce089abda46bc39167d5ca93730b90b8e4f65064bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current up to threshold, and a quadratic rise above threshold while in saturation. The added details do not detract from the correct sketch.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3224,
        "total_tokens": 4340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2313,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3224,
        "total_tokens": 4340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2313,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch $I_X$ versus $V_X$, we analyze the operating regions of the NMOS transistor $M_1$ as the voltage $V_X$ varies.\n\n---\n\n### 1. Circuit Analysis and Node Voltages\n\n* **Source:** Connected to ground $\\implies V_S = 0\\text{ V}$\n* **Drain and Gate:** Both tied to the voltage source $V_X \\implies V_D = V_G = V_X$\n* **Terminal Voltages:**\n  $$V_{GS} = V_G - V_S = V_X$$\n  $$V_{DS} = V_D - V_S = V_X$$\n* **Current:** Neglecting the gate current ($I_G \\approx 0$), the current provided by the source is equal to the drain current:\n  $$I_X = I_D$$\n\n---\n\n### 2. Operating Regions of $M_1$\n\n#### **Case 1: Cutoff Region ($V_X \\le V_{TH}$)**\n* For $V_{GS} < V_{TH}$ (where $V_{TH}$ is the threshold voltage of the NMOS):\n  * The channel has not formed, and the transistor is **OFF**.\n  * Therefore:\n    $$I_X = 0$$\n\n#### **Case 2: Saturation Region ($V_X > V_{TH}$)**\n* To determine whether the transistor is in triode or saturation, we check the saturation condition:\n  $$V_{DS} \\ge V_{GS} - V_{TH}$$\n  Substituting $V_{DS} = V_X$ and $V_{GS} = V_X$:\n  $$V_X \\ge V_X - V_{TH} \\implies 0 \\ge -V_{TH} \\implies V_{TH} \\ge 0$$\n* Since $V_{TH} > 0$ for an enhancement-mode NMOS, this condition is **always satisfied**. \n* Thus, whenever $M_1$ is turned ON, it is **always in saturation** (it never enters the triode region).\n\n* Using the square-law saturation current formula (ignoring channel-length modulation, $\\lambda = 0$):\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n\n* The small-signal conductance (slope of the curve) is:\n  $$\\frac{dI_X}{dV_X} = \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})$$\n  * At $V_X = V_{TH}$, the slope is zero $\\left(\\left.\\frac{dI_X}{dV_X}\\right|_{V_X = V_{TH}} = 0\\right)$, so the curve leaves the horizontal axis smoothly.\n  * For $V_X > V_{TH}$, the current grows **quadratically (parabolically)**.\n\n*(Note: If channel-length modulation $\\lambda$ is included, $I_X = \\frac{1}{2}\\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2 (1 + \\lambda V_X)$, which curves upward slightly faster).*\n\n---\n\n### 3. Behavior for $V_X < 0$ (Negative Voltages)\n* If $V_X < 0$, the ground terminal ($0\\text{ V}$) becomes the drain and the node at $V_X$ becomes the source.\n* Since the gate is at $V_X$, the new $V_{GS} = V_X - V_X = 0 < V_{TH}$, so the channel remains **OFF** ($I_X = 0$).\n* *(If the substrate is connected to ground, the n+/p-sub junction becomes forward-biased for $V_X \\lesssim -0.7\\text{ V}$, resulting in large current flowing in the reverse direction).*\n\n---\n\n### 4. Sketch of $I_X$ versus $V_X$\n\n```text\n       IX\n        ^\n        |                                       . ' (Parabolic: ~ (Vx - Vth)²)\n        |                                   . '\n        |                                . '\n        |                             . '\n        |                          . '\n        |                       . '\n        |                   . ' \n        |             . - '\n  ------0-----------+---------------------------> VX\n        |          VTH\n```\n\n### Summary of Key Features:\n1. **$V_X \\le V_{TH}$:** $I_X = 0$ (flat horizontal line along the $V_X$-axis).\n2. **$V_X = V_{TH}$:** Current begins to flow; slope starts at zero.\n3. **$V_X > V_{TH}$:** $I_X$ increases **quadratically** with $V_X$ as $M_1$ operates entirely in the saturation region.",
        "format": "markdown",
        "sha256": "2d3c2ac0926ba503d78aa8ee21d00f146eb771920ca249710acc2005d916e149"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS as off up to threshold and in saturation above threshold, giving a quadratic current rise. The additional negative-voltage and channel-length-modulation notes do not detract from the answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3974,
        "total_tokens": 5090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2859,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3974,
        "total_tokens": 5090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2859,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the relationship between $I_X$ and $V_X$, we first determine the terminal voltages of the NMOS transistor $M_1$:\n\n1. **Terminal Voltages:**\n   - **Source:** $V_S = 0\\text{ V}$\n   - **Gate:** $V_G = V_X \\implies V_{GS} = V_X - 0 = V_X$\n   - **Drain:** Connected to the $1\\text{ V}$ voltage source $\\implies V_D = 1\\text{ V} \\implies V_{DS} = 1\\text{ V} - 0 = 1\\text{ V}$\n   - **Current:** The current $I_X$ flows directly into the drain of $M_1$, so $I_X = I_D$.\n\n---\n\n### Operating Regions of $M_1$ as $V_X$ Varies\n\nLet $V_{TH}$ denote the threshold voltage of the transistor, and define $k = \\mu_n C_{ox}\\frac{W}{L}$.\n\n#### 1. Cutoff Region: $V_X < V_{TH}$\n* **Condition:** $V_{GS} < V_{TH}$\n* The transistor is turned **OFF**.\n* **Current:**\n  $$I_X = 0$$\n\n---\n\n#### 2. Saturation Region: $V_{TH} \\le V_X \\le 1\\text{ V} + V_{TH}$\n* **Condition:** \n  $$V_{GS} \\ge V_{TH} \\quad \\text{and} \\quad V_{DS} \\ge V_{GS} - V_{TH}$$\n  Since $V_{DS} = 1\\text{ V}$:\n  $$1\\text{ V} \\ge V_X - V_{TH} \\implies V_X \\le 1\\text{ V} + V_{TH}$$\n* The transistor operates in **Saturation**.\n* **Current (neglecting channel-length modulation):**\n  $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n* In this region, $I_X$ increases **quadratically** (parabolically) with $V_X$.\n\n---\n\n#### 3. Triode (Linear) Region: $V_X > 1\\text{ V} + V_{TH}$\n* **Condition:** \n  $$V_{GS} > V_{TH} \\quad \\text{and} \\quad V_{DS} < V_{GS} - V_{TH} \\implies V_X > 1\\text{ V} + V_{TH}$$\n* The transistor enters the **Triode** region.\n* **Current:**\n  $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_{GS} - V_{TH})V_{DS} - \\frac{1}{2}V_{DS}^2 \\right]$$\n  Substituting $V_{DS} = 1\\text{ V}$ and $V_{GS} = V_X$:\n  $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_{TH})(1) - \\frac{1}{2}(1)^2 \\right] = \\mu_n C_{ox} \\frac{W}{L} \\left( V_X - V_{TH} - 0.5 \\right)$$\n* In this region, $I_X$ increases **linearly** with $V_X$ with a constant slope of:\n  $$\\frac{dI_X}{dV_X} = \\mu_n C_{ox} \\frac{W}{L}$$\n\n---\n\n### Key Transition Points\n\n1. **At $V_X = V_{TH}$:**\n   - $I_X = 0$\n   - Slope $\\left.\\frac{dI_X}{dV_X}\\right|_{V_X = V_{TH}} = 0$\n\n2. **At $V_X = 1\\text{ V} + V_{TH}$ (Boundary between Saturation and Triode):**\n   - **Current:**\n     $$I_X = \\frac{1}{2}\\mu_n C_{ox} \\frac{W}{L}(1)^2 = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}$$\n   - **Slope:**\n     - From saturation: $\\frac{dI_X}{dV_X} = \\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH}) = \\mu_n C_{ox}\\frac{W}{L}$\n     - From triode: $\\frac{dI_X}{dV_X} = \\mu_n C_{ox}\\frac{W}{L}$\n   - Both the current and the slope are **continuous** at this point.\n\n---\n\n### Sketch of $I_X$ versus $V_X$\n\n```text\n       IX ^\n          |                                            /  (Linear Region)\n          |                                           /   Slope = μn·Cox·(W/L)\n          |                                          /\n          |                                   _ . - '\n 1/2·k·1² - - - - - - - - - - - - - - - - - •'  (1 V + VTH,  1/2·k)\n          |                              . '\n          |                           . '   (Quadratic / Parabolic)\n          |                      _ . '\n        0 +---------------------•-----------------------------------> VX\n          0                    VTH         1 V + VTH\n          |<----- Cutoff ------>|<--- Saturation --->|<--- Triode --->\n```",
        "format": "markdown",
        "sha256": "d0a1d4fb5bbd337bb37d1b3219aaf08711a413d9d0dde4d532e643db3c296dae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, quadratic saturation current from VTH to VTH + 1 V, and a roughly linear triode-region rise beyond that boundary.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4935,
        "total_tokens": 6028,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4935,
        "total_tokens": 6028,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the relationship between $I_X$ and $V_X$, we analyze the terminal voltages of the NMOS transistor $M_1$:\n\n### 1. Terminal Voltages\n* **Source:** $V_S = 0\\text{ V}$\n* **Gate:** $V_G = V_X \\implies V_{GS} = V_X$\n* **Drain:** Fixed by the $1\\text{ V}$ DC supply $\\implies V_D = 1\\text{ V} \\implies V_{DS} = 1\\text{ V}$\n* **Current:** The current $I_X$ flows directly into the drain, so $I_X = I_D$.\n\n---\n\n### 2. Operating Regions as $V_X$ Varies\n\nAssuming standard long-channel MOSFET equations with threshold voltage $V_{TH}$ and transconductance parameter $k_n = \\mu_n C_{ox}\\frac{W}{L}$:\n\n#### **Region 1: Cutoff ($V_X < V_{TH}$)**\n* **Condition:** $V_{GS} < V_{TH}$\n* The channel has not formed.\n* **Current:** \n  $$I_X = 0$$\n\n---\n\n#### **Region 2: Saturation ($V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$)**\n* **Condition:** The transistor is ON ($V_{GS} \\ge V_{TH}$) and pinched off at the drain:\n  $$V_{DS} \\ge V_{GS} - V_{TH} \\implies 1\\text{ V} \\ge V_X - V_{TH} \\implies V_X \\le V_{TH} + 1\\text{ V}$$\n* **Current:**\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2$$\n* **Characteristics:** \n  * $I_X$ grows **quadratically** (parabolically) with $V_X$.\n  * At the boundary $V_X = V_{TH} + 1\\text{ V}$:\n    $$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(1)^2 = \\frac{1}{2} k_n$$\n\n---\n\n#### **Region 3: Triode / Linear Region ($V_X > V_{TH} + 1\\text{ V}$)**\n* **Condition:** The channel is continuous from source to drain:\n  $$V_{DS} < V_{GS} - V_{TH} \\implies 1\\text{ V} < V_X - V_{TH} \\implies V_X > V_{TH} + 1\\text{ V}$$\n* **Current:**\n  $$I_X = \\mu_n C_{ox}\\frac{W}{L} \\left[(V_{GS} - V_{TH})V_{DS} - \\frac{1}{2}V_{DS}^2\\right]$$\n  Substituting $V_{GS} = V_X$ and $V_{DS} = 1\\text{ V}$:\n  $$I_X = \\mu_n C_{ox}\\frac{W}{L}\\left(V_X - V_{TH} - \\frac{1}{2}\\right)$$\n* **Characteristics:**\n  * Since $V_{DS}$ is constant, $I_X$ increases **linearly** with $V_X$ with a constant slope equal to $\\mu_n C_{ox}\\frac{W}{L} = k_n$.\n  * The slope is continuous at the transition point $V_X = V_{TH} + 1\\text{ V}$.\n\n---\n\n### 3. Summary Plot Description & Sketch\n\n```\n         IX\n         ^\n         |\n         |                               / (Linear: slope = kn)\n         |                              /\n         |                             / \n         |                       . - '\n1/2 kn - | - - - - - - - - - - . (Transition to Triode)\n         |                   .'\n         |                 .'  (Quadratic: Saturation)\n         |               .'\n       0 +-------------+-------+------------------> VX\n         0           V_TH   V_TH + 1 V\n          [ Cutoff ] [ Saturation ] [ Triode ]\n```\n\n* **For $V_X \\le V_{TH}$:** $I_X = 0$.\n* **For $V_{TH} < V_X \\le V_{TH} + 1\\text{ V}$:** Parabolic curve opening upward.\n* **For $V_X > V_{TH} + 1\\text{ V}$:** Straight line with constant slope $\\mu_n C_{ox}\\frac{W}{L}$.",
        "format": "markdown",
        "sha256": "d92eec393e616d74ceb89dfbf2df082f1cf075825e9274946e707a918b98c117"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, quadratic saturation up to VTH + 1 V, and a continuous, roughly linear triode-region rise beyond that point.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4214,
        "total_tokens": 5307,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3138,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4214,
        "total_tokens": 5307,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3138,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the relationship between $I_X$ and $V_X$, we determine the terminal voltages and operating regions of the NMOS transistor $M_1$.\n\n---\n\n### 1. Terminal Voltages\n* **Gate Voltage:** $V_G = V_X$\n* **Source Voltage:** $V_S = 0\\text{ V}$\n* **Drain Voltage:** $V_D = 1\\text{ V}$\n* **Gate-to-Source Voltage:** $V_{GS} = V_X$\n* **Drain-to-Source Voltage:** $V_{DS} = 1\\text{ V}$\n\nThe current $I_X$ shown entering the drain corresponds to the drain current $I_D$, so $I_X = I_D$.\n\n---\n\n### 2. Operating Regions as a Function of $V_X$\n\nLet $V_{TH}$ be the threshold voltage of the NMOS transistor (assuming $V_{TH} > 0$) and $k_n = \\mu_n C_{ox}\\frac{W}{L}$.\n\n#### **Region 1: Cutoff ($V_X < V_{TH}$)**\n* **Condition:** $V_{GS} < V_{TH} \\implies V_X < V_{TH}$\n* The channel has not formed, so no drain current flows:\n  $$I_X = 0$$\n\n---\n\n#### **Region 2: Saturation ($V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$)**\n* **Condition:** The channel is inverted ($V_{GS} \\ge V_{TH}$) and pinched off at the drain side:\n  $$V_{DS} \\ge V_{GS} - V_{TH} \\implies 1\\text{ V} \\ge V_X - V_{TH} \\implies V_X \\le V_{TH} + 1\\text{ V}$$\n* **Current equation:**\n  $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2 = \\frac{1}{2} k_n (V_X - V_{TH})^2$$\n* In this region, $I_X$ increases **quadratically (parabolically)** with $V_X$.\n* At the boundary $V_X = V_{TH} + 1\\text{ V}$:\n  $$I_X = \\frac{1}{2} k_n (1)^2 = \\frac{1}{2} k_n$$\n\n---\n\n#### **Region 3: Triode / Linear Region ($V_X > V_{TH} + 1\\text{ V}$)**\n* **Condition:** The overdrive voltage exceeds $V_{DS}$:\n  $$V_{DS} < V_{GS} - V_{TH} \\implies 1\\text{ V} < V_X - V_{TH} \\implies V_X > V_{TH} + 1\\text{ V}$$\n* **Current equation:**\n  $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[(V_{GS} - V_{TH})V_{DS} - \\frac{1}{2}V_{DS}^2\\right]$$\n  Substituting $V_{DS} = 1\\text{ V}$ and $V_{GS} = V_X$:\n  $$I_X = k_n \\left[(V_X - V_{TH})(1) - \\frac{1}{2}(1)^2\\right] = k_n \\left(V_X - V_{TH} - \\frac{1}{2}\\right)$$\n* Since $V_{DS}$ is held constant at $1\\text{ V}$, $I_X$ depends **linearly** on $V_X$ with a constant slope of $\\frac{dI_X}{dV_X} = k_n$.\n\n*(Note: The transition at $V_X = V_{TH} + 1\\text{ V}$ is smooth because both the current value and the derivative $\\frac{dI_X}{dV_X}$ are continuous across the boundary).*\n\n---\n\n### 3. Summary of Characteristics for the Sketch\n\n| Range of $V_X$ | Operating Region | Shape of $I_X$ vs. $V_X$ |\n| :--- | :--- | :--- |\n| $V_X < V_{TH}$ | **Cutoff** | Flat along the axis ($I_X = 0$) |\n| $V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$ | **Saturation** | Quadratic / Parabolic curve (concave upward) |\n| $V_X > V_{TH} + 1\\text{ V}$ | **Triode** | Straight line with constant positive slope ($k_n$) |\n\n---\n\n### 4. Sketch of $I_X$ vs. $V_X$\n\n```text\n       IX\n        ^\n        |                                        / (Linear: slope = kn)\n        |                                       /\n        |                                      /\n        |                                     /\n        |                                    /\n        |                                   * (Transition point: IX = 0.5*kn)\n        |                                 .'\n        |                              .-'   (Quadratic: 0.5*kn*(Vx - Vth)^2)\n        |                           .-'\n   0 ---+-----------------*--------'----------------------------> VX\n        0               VTH      VTH + 1 V\n        |<--- Cutoff ---->|<-- Saturation -->|<---- Triode ----->|\n```",
        "format": "markdown",
        "sha256": "4f7e19997da7883651a4566c281dc1583107ec4c7e16ae224d3498c9ff3cfa4e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, quadratic saturation from VTH to VTH + 1 V, and a roughly linear triode-region rise beyond that, with appropriate current equations and sketch.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4115,
        "total_tokens": 5208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4115,
        "total_tokens": 5208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, the device shown in the figure cannot act as a current source.** \n\nHere is a detailed explanation of why, along with the common misconception behind this question:\n\n---\n\n### 1. Identifying the Circuit\n* **Device type:** The transistor $M_1$ is a **PMOS transistor** (indicated by the source arrow pointing inward toward the channel).\n* **Connections:** \n  * The source is at the top terminal (node $X$), where the voltage is $V_X$ and current $I_X$ enters.\n  * The gate is connected to ground ($V_G = 0\\text{ V}$).\n  * The drain is connected to ground ($V_D = 0\\text{ V}$).\n* Because both the gate and drain are tied to the same potential ($V_G = V_D = 0\\text{ V}$), this is a **diode-connected PMOS transistor**.\n\n---\n\n### 2. The Common Misconception\nMany students and circuit designers are taught the rule of thumb:  \n> *\"A MOSFET operating in the saturation region acts as a current source.\"*\n\nIf we check the operating region of $M_1$:\n* $|V_{GS}| = V_{SG} = V_X$\n* $|V_{DS}| = V_{SD} = V_X$\n\nAs long as $V_X > |V_{TH}|$, the saturation condition is satisfied:\n$$|V_{DS}| \\ge |V_{GS}| - |V_{TH}| \\implies V_X \\ge V_X - |V_{TH}|$$\n\nSince the condition always holds, **the transistor is indeed operating in the saturation region**. This leads to the mistaken belief that it must act as a current source.\n\n---\n\n### 3. Why It Does Not Act as a Current Source\nA current source must provide a current that is **independent** (or nearly independent) of the voltage across its terminals. In circuit terms, this requires a **very high (ideally infinite) small-signal output resistance**:\n$$R_{\\text{out}} = \\frac{dV_X}{dI_X} \\to \\infty$$\n\nA MOSFET acts as a current source **only when its gate-to-source voltage ($V_{GS}$) is held constant**, allowing the drain to deliver a stable current independent of $V_{DS}$.\n\nIn this circuit:\n1. **$V_{SG}$ is not constant:** Because the gate is fixed at ground and the source is the external terminal ($V_S = V_X$), the control voltage is directly tied to the terminal voltage:\n   $$V_{SG} = V_X$$\n2. **Current varies strongly with voltage:**\n   $$I_X \\approx \\frac{1}{2}\\mu_p C_{ox}\\frac{W}{L}(V_X - |V_{TH}|)^2$$\n   Any change in $V_X$ causes a large change in $I_X$.\n3. **Small-signal impedance is low:**\n   Looking into the terminal, the impedance is:\n   $$R_{\\text{in}} = \\frac{1}{g_m + g_{mb}} \\parallel r_o \\approx \\frac{1}{g_m}$$\n   Since $1/g_m$ is typically quite small (ranging from a few hundred ohms to a few kilohms), the circuit exhibits a **low impedance**.\n\n---\n\n### Conclusion\nInstead of acting as a current source, this configuration behaves as a **diode** (or a low-value, non-linear resistor). It is commonly used as a diode load or as the input reference branch of a current mirror, but it cannot function on its own as a current source.",
        "format": "markdown",
        "sha256": "b3f7282e27be549b48f8fde5986fd1429b5401a607964c421afd6203650ee001"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS and its connections, and explains that the diode-connected device has a voltage-dependent current and low small-signal resistance of about 1/gm, so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1080,
        "output_tokens": 11720,
        "total_tokens": 12800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1080,
        "output_tokens": 11720,
        "total_tokens": 12800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the device shown in the figure **cannot** act as a current source. \n\nHere is the detailed analysis explaining why:\n\n---\n\n### 1. Device Identification and Connections\n* **Transistor Type:** The arrow on the top terminal points **inward** toward the channel, which identifies $M_1$ as a **p-channel MOSFET (PMOS)**, with the top terminal being the **Source**.\n* **Terminal Potentials:**\n  * **Gate ($G$):** Connected to ground ($V_G = 0\\text{ V}$).\n  * **Drain ($D$):** Connected to ground ($V_D = 0\\text{ V}$).\n  * **Source ($S$):** At voltage $V_X$, with current $I_X$ entering it.\n* Because both the gate and drain are tied to ground ($V_G = V_D = 0$), this device is in a **diode-connected configuration**.\n\n---\n\n### 2. Large-Signal $I\\text{--}V$ Behavior\nFor current to flow, the source voltage must exceed the threshold voltage magnitude ($V_X > |V_{TH}|$).\n\n* The source-to-gate voltage is:\n  $$V_{SG} = V_S - V_G = V_X - 0 = V_X$$\n* The source-to-drain voltage is:\n  $$V_{SD} = V_S - V_D = V_X - 0 = V_X$$\n\nBecause $V_{SD} = V_{SG}$, the saturation condition ($V_{SD} \\ge V_{SG} - |V_{TH}|$) is **always satisfied** whenever the transistor conducts. \n\nIn saturation, the current entering the device is given by:\n$$I_X \\approx \\frac{1}{2}\\mu_p C_{ox}\\frac{W}{L}\\left(V_X - |V_{TH}|\\right)^2$$\n\nInstead of remaining constant, the current $I_X$ varies **quadratically** with the applied terminal voltage $V_X$.\n\n---\n\n### 3. Small-Signal Impedance\nAn ideal current source must have an **infinite small-signal output resistance** ($r_{\\text{out}} \\to \\infty$), ensuring that changes in terminal voltage do not alter the current.\n\nLooking into the source terminal of this diode-connected PMOS:\n$$R_{\\text{in}} = \\frac{\\partial V_X}{\\partial I_X} \\approx \\frac{1}{g_m} \\parallel r_o \\approx \\frac{1}{g_m}$$\n\nBecause $1/g_m$ is typically very small (hundreds of ohms to a few kilo-ohms), this circuit presents a **low impedance** to the node, behaving as a **nonlinear resistor or diode**, not a current source.\n\n---\n\n### 4. Common Misconception\nStudents often learn that *\"a MOSFET operating in saturation acts as a current source.\"* \n* While true, this behavior only applies at the **drain terminal** when the **gate-to-source voltage ($V_{GS}$ or $V_{SG}$) is held constant** by a fixed DC bias.\n* In this circuit, the output is taken at the **source**, meaning any variation in $V_X$ directly modulates $V_{SG}$, strongly changing the current.\n\nTo make a PMOS act as a current source, its **source** must be tied to a fixed supply ($V_{DD}$), its **gate** must be tied to a constant bias voltage ($V_B$), and the load current must be drawn from its **drain**.",
        "format": "markdown",
        "sha256": "df988e8b06f073de8125e34ee6208511756326eb05f1efbb0472acfcb52e3364"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a diode-connected PMOS with source at VX and gate/drain grounded, and explains that its low small-signal resistance (about 1/gm) makes it a nonlinear resistor rather than a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1080,
        "output_tokens": 8105,
        "total_tokens": 9185,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7311,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1080,
        "output_tokens": 8105,
        "total_tokens": 9185,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7311,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the device shown in the figure **cannot** act as a current source. \n\n---\n\n### Detailed Explanation\n\n#### 1. Identification of the Device and Connections\n* **Transistor Type:** The symbol represents a **PMOS transistor** ($M_1$), as indicated by the arrow on the top terminal pointing inwards toward the channel.\n* **Terminals:**\n  * **Source ($S$):** The top terminal, connected to node $X$ at potential $V_X$, through which current $I_X$ enters.\n  * **Gate ($G$):** Connected to ground ($V_G = 0\\text{ V}$).\n  * **Drain ($D$):** Connected to ground ($V_D = 0\\text{ V}$).\n* Because both the gate and drain are tied to ground ($V_G = V_D = 0$), the transistor is in a **diode-connected** configuration.\n\n---\n\n#### 2. Why It Cannot Act as a Current Source\nA current source must provide a current that is independent (or nearly independent) of the voltage across its terminals. In other words, its small-signal output resistance must be **ideally infinite** (or practically very high, $R_{\\text{out}} \\gg 1/g_m$).\n\nLooking into node $X$:\n1. **Operating Region:**\n   * For the transistor to conduct ($I_X > 0$), the source voltage must be positive: $V_X > |V_{THp}|$.\n   * The source-to-gate voltage is:\n     $$V_{SG} = V_X - V_G = V_X$$\n   * The source-to-drain voltage is:\n     $$V_{SD} = V_X - V_D = V_X$$\n   * Since $V_{SD} = V_{SG} > V_{SG} - |V_{THp}|$, the transistor is in the **saturation region**.\n\n2. **Current vs. Voltage Relationship:**\n   * In saturation, the current entering the device is:\n     $$I_X \\approx \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_X - |V_{THp}|)^2$$\n   * Unlike a proper current source where current is constant, here $I_X$ is **strongly dependent on the terminal voltage $V_X$** (varying quadratically with $V_X$).\n\n3. **Small-Signal Output Resistance:**\n   * The impedance looking into node $X$ is:\n     $$R_{\\text{in}} = \\frac{\\partial V_X}{\\partial I_X} \\approx \\frac{1}{g_m} \\parallel r_o \\approx \\frac{1}{g_m}$$\n     *(or $\\frac{1}{g_m + g_{mb}}$ if body effect is included)*.\n   * Because $1/g_m$ is typically very small (on the order of hundreds of ohms to a few kilohms), this terminal presents a **very low impedance**, which is the exact opposite of a current source.\n\n---\n\n### The Common Pitfall / Misconception\nA common rule of thumb in analog design is that *\"a MOSFET operating in saturation acts as a current source.\"* \n\nHowever, this rule **only holds when looking into the drain** while the gate-to-source voltage ($V_{GS}$) is held constant by a separate bias voltage. In that case, variations in drain voltage do not modulate the channel overdrive, yielding a high output resistance ($r_o$).\n\nIn this circuit:\n* The terminal of interest is the **source**, not the drain.\n* Any change in the terminal voltage $V_X$ directly modulates the gate-source overdrive ($\\Delta V_{SG} = \\Delta V_X$).\n* Consequently, the device behaves as a **diode-connected load** (or active resistor), commonly used as the reference side of a current mirror, **not** as a current source.",
        "format": "markdown",
        "sha256": "edb9a8c656c38b9733ed12d95046743fd786a22f94423f48c1b27dbb0d1b60f9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS with source at VX and gate/drain grounded, and explains that the diode-connected device has low incremental resistance (about 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1080,
        "output_tokens": 13823,
        "total_tokens": 14903,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12949,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1080,
        "output_tokens": 13823,
        "total_tokens": 14903,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12949,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **PMOS Common-Source (CS) Amplifier with Source Degeneration** (resistor $R_S$) and a resistive load ($R_D$).\n\n---\n\n### 1. Circuit Identification & Role of Components\n\n* **Transistor $M_1$:** A p-channel MOSFET (PMOS). The arrow pointing inward on the source terminal indicates a PMOS device.\n* **$R_S$ (Source Degeneration Resistor):** Provides negative series-series feedback. It linearizes the amplifier, stabilizes the DC bias point, and increases output resistance, at the expense of reduced voltage gain.\n* **$R_D$ (Drain Resistor):** Converts the small-signal drain current into an output voltage $V_{\\text{out}}$.\n* **$V_{\\text{in}}$:** AC/DC input signal applied to the gate.\n* **$V_{\\text{out}}$:** Output taken from the drain node.\n\n---\n\n### 2. Large-Signal (DC) Biasing & Conditions for Saturation\n\nFor linear amplification, $M_1$ must operate in the **saturation (active) region**.\n\n#### Conditions for Saturation:\n1. **Inversion condition:**\n   $$V_{SG} > |V_{THP}| \\implies V_S - V_{\\text{in}} > |V_{THP}|$$\n2. **Saturation condition:**\n   $$V_{SD} \\ge V_{SG} - |V_{THP}| \\implies V_{\\text{in}} + |V_{THP}| \\ge V_D$$\n\n#### DC Node Voltages and Currents:\nNeglecting channel-length modulation ($\\lambda = 0$):\n* **Source Voltage:** \n  $$V_S = V_{DD} - I_D R_S$$\n* **Drain Voltage (DC output):** \n  $$V_D = I_D R_D$$\n* **Drain Current ($I_D$):**\n  $$I_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)(V_{SG} - |V_{THP}|)^2$$\n  Substituting $V_{SG} = V_{DD} - I_D R_S - V_{\\text{in}}$ yields a quadratic equation in $I_D$, showing that $R_S$ provides negative feedback against DC current variations (e.g., due to temperature or process variations).\n\n---\n\n### 3. Small-Signal Analysis\n\n#### Small-Signal Parameters:\n* **Transconductance:** \n  $$g_m = \\mu_p C_{ox}\\left(\\frac{W}{L}\\right)(V_{SG} - |V_{THP}|) = \\sqrt{2\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)I_D}$$\n* **Transistor Output Resistance:** \n  $$r_O \\approx \\frac{1}{\\lambda I_D}$$\n* **Body-effect transconductance:** $g_{mb} = \\eta g_m$ (if the n-well/body is connected to $V_{DD}$ rather than the source).\n\n---\n\n#### A. Voltage Gain ($A_v$)\n\n1. **Ideal Case (Neglecting $r_O$ and Body Effect, $r_O \\to \\infty, g_{mb} = 0$):**\n   * The small-signal drain current is:\n     $$i_d = \\frac{g_m}{1 + g_m R_S} v_{\\text{in}}$$\n   * Since $v_{\\text{out}} = -i_d R_D$:\n     $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -\\frac{g_m R_D}{1 + g_m R_S} = -\\frac{R_D}{\\frac{1}{g_m} + R_S}$$\n   * **Inversion:** The negative sign indicates that the amplifier is **inverting** (an increase in $V_{\\text{in}}$ decreases $V_{SG}$, reducing current and pulling $V_{\\text{out}}$ down).\n   * **Strong Degeneration Limit ($g_m R_S \\gg 1$):**\n     $$A_v \\approx -\\frac{R_D}{R_S}$$\n     The gain becomes virtually independent of transistor parameters, set solely by the resistor ratio.\n\n2. **Including Body Effect ($g_{mb} \\neq 0$, Well tied to $V_{DD}$):**\n   $$A_v = -\\frac{g_m R_D}{1 + (g_m + g_{mb})R_S}$$\n\n3. **Including Channel-Length Modulation ($r_O < \\infty$):**\n   $$A_v = -\\frac{g_m r_O R_D}{R_D + R_S + r_O + (g_m + g_{mb}) R_S r_O}$$\n\n---\n\n#### B. Input and Output Impedance\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  $$R_{\\text{in}} = \\infty \\quad \\text{(at low frequencies, looking into the insulated gate)}$$\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  Looking into the $V_{\\text{out}}$ terminal:\n  $$R_{\\text{out}} = R_D \\parallel R_{out,\\text{drain}}$$\n  where the impedance looking up into the PMOS drain is boosted by source degeneration:\n  $$R_{out,\\text{drain}} = r_O + \\left[1 + (g_m + g_{mb})r_O\\right]R_S \\approx r_O (1 + g_m R_S)$$\n  * If $r_O \\to \\infty$:\n    $$R_{\\text{out}} \\approx R_D$$\n\n---\n\n### 4. Summary of Design Trade-offs with $R_S$\n\n| Parameter | Without $R_S$ ($R_S = 0$) | With $R_S$ ($R_S > 0$) | Impact / Comment |\n| :--- | :--- | :--- | :--- |\n| **Voltage Gain ($|A_v|$)** | High ($\\approx g_m R_D$) | Lower ($\\approx \\frac{g_m R_D}{1 + g_m R_S}$) | Gain sacrificed for linearity |\n| **Linearity** | Poor (square-law distortion) | Significantly improved | Degeneration linearizes $I_D-V_{\\text{in}}$ characteristic |\n| **Bandwidth** | Moderate | Higher | Negative feedback extends the $-3\\text{ dB}$ bandwidth |\n| **Output Resistance (at Drain)**| $r_O$ | $\\approx r_O(1 + g_m R_S)$ | Transistor acts as a better current source |\n| **DC Voltage Headroom** | Maximum swing | Reduced by $I_D R_S$ | Limits maximum output dynamic range |\n| **Noise** | Lower | Higher | $R_S$ introduces its own thermal noise ($4kTR_S$) |",
        "format": "markdown",
        "sha256": "b006bb76314bf97e59010196d76be132898aec9f00343ce2540e11450821fc3d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \u001b[?] \u001b[?]",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 4518,
        "total_tokens": 5634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2930,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 4518,
        "total_tokens": 5634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2930,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **PMOS Common-Source (CS) Amplifier with Source Degeneration**. \n\nHere is a comprehensive analysis covering its topology, DC operation, small-signal behavior, and the role of the degeneration resistor.\n\n---\n\n### 1. Circuit Identification & Topology\n\n* **Transistor ($M_1$):** PMOS transistor (indicated by the arrow on the source pointing into the channel).\n* **Input ($V_{\\text{in}}$):** Applied to the gate of $M_1$.\n* **Output ($V_{\\text{out}}$):** Taken from the drain of $M_1$.\n* **Degeneration Resistor ($R_S$):** Connected between the source terminal and the positive supply rail ($V_{DD}$).\n* **Load Resistor ($R_D$):** Connected between the drain terminal and ground.\n\n---\n\n### 2. Large-Signal (DC) Operating Conditions\n\nFor the amplifier to operate properly with high gain, $M_1$ must be biased in the **saturation (active) region**.\n\n1. **Terminal Voltages:**\n   * Source voltage:  \n     $$V_S = V_{DD} - I_D R_S$$\n   * Drain voltage:  \n     $$V_D = V_{\\text{out}} = I_D R_D$$\n   * Source-to-Gate voltage:  \n     $$V_{SG} = V_S - V_{\\text{in}} = V_{DD} - I_D R_S - V_{\\text{in}}$$\n\n2. **Conditions for Saturation:**\n   * Transistor is ON:\n     $$V_{SG} > |V_{THP}| \\implies V_{\\text{in}} < V_{DD} - I_D R_S - |V_{THP}|$$\n   * Saturation condition ($V_{SD} \\ge V_{SG} - |V_{THP}|$):\n     $$V_D \\le V_{\\text{in}} + |V_{THP}| \\implies I_D R_D \\le V_{\\text{in}} + |V_{THP}|$$\n\n3. **Drain Current (neglecting channel-length modulation):**\n   $$I_D = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right) (V_{SG} - |V_{THP}|)^2$$\n\n---\n\n### 3. Small-Signal AC Analysis\n\n#### A. Small-Signal Voltage Gain ($A_v$)\n\n* **Case 1: Ideal / Neglecting Channel-Length Modulation ($r_o \\to \\infty$) and Body Effect ($g_{mb} = 0$):**\n  Applying KVL and small-signal relationships ($v_{sg} = v_s - v_{\\text{in}}$ and $v_s = -i_d R_S$):\n  $$i_d = g_m v_{sg} = g_m(-i_d R_S - v_{\\text{in}}) \\implies i_d = -\\frac{g_m v_{\\text{in}}}{1 + g_m R_S}$$\n  Since $v_{\\text{out}} = i_d R_D$:\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -\\frac{g_m R_D}{1 + g_m R_S} = -\\frac{R_D}{\\frac{1}{g_m} + R_S}$$\n\n  > **Note on sign:** The negative sign indicates an **inverting** amplifier. An increase in $V_{\\text{in}}$ decreases $V_{SG}$, which reduces $I_D$, pulling $V_{\\text{out}}$ down towards ground.\n\n* **Case 2: Including Body Effect ($g_{mb} \\neq 0$):**\n  If the PMOS body (n-well) is tied to $V_{DD}$ instead of the source:\n  $$A_v = -\\frac{g_m R_D}{1 + (g_m + g_{mb}) R_S}$$\n\n* **Case 3: Including Channel-Length Modulation ($r_o$):**\n  $$A_v \\approx -\\frac{g_m r_o R_D}{R_D + R_S + r_o + (g_m + g_{mb}) r_o R_S}$$\n\n---\n\n#### B. Input and Output Impedance\n\n1. **Input Impedance ($R_{\\text{in}}$):**\n   * Looking into the insulated MOS gate at low frequencies:\n     $$R_{\\text{in}} = \\infty$$\n\n2. **Output Impedance ($R_{\\text{out}}$):**\n   * Measured from the output node looking back into the circuit:\n     $$R_{\\text{out}} = R_D \\parallel R_{\\text{out,drain}}$$\n   * Where the resistance looking up into the drain is boosted by degeneration:\n     $$R_{\\text{out,drain}} = r_o + R_S + (g_m + g_{mb}) r_o R_S \\approx (1 + g_m R_S) r_o$$\n   * For $r_o \\to \\infty$:\n     $$R_{\\text{out}} \\approx R_D$$\n\n---\n\n### 4. Effects of Source Degeneration ($R_S$)\n\nThe resistor $R_S$ introduces **negative current-series feedback**, leading to several important trade-offs:\n\n| Parameter | Without $R_S$ | With $R_S$ | Impact of $R_S$ |\n| :--- | :--- | :--- | :--- |\n| **Voltage Gain ($|A_v|$)** | $g_m R_D$ | $\\approx \\frac{R_D}{1/g_m + R_S}$ | **Decreases** (gain is reduced by a factor of $1 + g_m R_S$) |\n| **Linearity** | Poor (quadratic $I$-$V$) | High | **Significantly improves**; for $g_m R_S \\gg 1$, $A_v \\approx -R_D / R_S$ (gain becomes independent of device parameters) |\n| **Output Resistance (Drain)** | $r_o$ | $\\approx (1 + g_m R_S) r_o$ | **Increases** (acts as a stiffer current source) |\n| **Bandwidth** | Standard | Wider | **Increases** (due to the gain-bandwidth product trade-off) |\n| **Voltage Headroom** | Maximum | Reduced | **Decreases** due to the DC voltage drop $I_D R_S$ across $R_S$ |",
        "format": "markdown",
        "sha256": "777524203cc2d53a7b064795f18b9d0b782baecb40d058133d0e8bf34b177a9c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS). The body-effect refinement is also consistent with the golden solution.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 4102,
        "total_tokens": 5218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 4102,
        "total_tokens": 5218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Identification and Overview\n\nThe given circuit is a **PMOS Common-Source (CS) amplifier with source degeneration**.\n\n* **Transistor ($M_1$):** A p-channel MOSFET (PMOS), indicated by the inward-pointing arrow at the source terminal.\n* **Input ($V_{\\text{in}}$):** Applied to the gate of $M_1$.\n* **Output ($V_{\\text{out}}$):** Taken from the drain of $M_1$.\n* **Resistors:**\n  * $R_S$: Source degeneration resistor connected between the source and the supply voltage $V_{DD}$.\n  * $R_D$: Drain load resistor connected between the drain and ground.\n\n---\n\n### 2. Large-Signal (DC) Biasing Analysis\n\nFor linear amplification, the transistor must operate in the **saturation (active) region**.\n\n1. **Terminal Voltages:**\n   * Gate voltage: $V_G = V_{\\text{in}}$\n   * Source voltage: $V_S = V_{DD} - I_D R_S$\n   * Drain voltage: $V_D = V_{\\text{out}} = I_D R_D$\n\n2. **Source-to-Gate Voltage ($V_{SG}$):**\n   $$V_{SG} = V_S - V_G = V_{DD} - I_D R_S - V_{\\text{in}}$$\n\n3. **Conditions for Saturation:**\n   * Conduction condition:\n     $$V_{SG} > |V_{THP}|$$\n   * Saturation condition:\n     $$V_{SD} \\ge V_{SG} - |V_{THP}| \\implies V_D \\le V_G + |V_{THP}|$$\n     $$V_{\\text{out}} \\le V_{\\text{in}} + |V_{THP}|$$\n\n4. **Drain Current ($I_D$) in Saturation** (neglecting channel-length modulation):\n   $$I_D = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right) \\left(V_{SG} - |V_{THP}|\\right)^2$$\n   Substituting $V_{SG}$:\n   $$I_D = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right) \\left(V_{DD} - I_D R_S - V_{\\text{in}} - |V_{THP}|\\right)^2$$\n\n---\n\n### 3. Small-Signal AC Analysis\n\nUsing the small-signal model where $g_m$ is the transconductance and $r_o$ is the output resistance of the transistor:\n\n#### A. Voltage Gain ($A_v$)\n1. **Simplified Case (neglecting $r_o$ and body effect):**\n   * The effective transconductance with degeneration is:\n     $$G_m = \\frac{g_m}{1 + g_m R_S}$$\n   * The load is simply $R_D$.\n   * Since an increase in $V_{\\text{in}}$ decreases $V_{SG}$, $I_D$ drops, lowering $V_{\\text{out}}$, making the amplifier **inverting**:\n     $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -G_m R_D = -\\frac{g_m R_D}{1 + g_m R_S}$$\n\n   * **Strong Degeneration Limit ($g_m R_S \\gg 1$):**\n     $$A_v \\approx -\\frac{R_D}{R_S}$$\n     In this regime, the gain is set purely by the ratio of passive resistors, making it independent of transistor parameters and temperature.\n\n2. **Including Channel-Length Modulation ($r_o$):**\n   $$A_v = -\\frac{g_m r_o R_D}{r_o + R_D + R_S + g_m r_o R_S} = -\\frac{g_m R_D}{1 + g_m R_S + \\frac{R_S + R_D}{r_o}}$$\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking directly into the insulated gate terminal:\n$$R_{\\text{in}} \\approx \\infty \\quad \\text{(at low to moderate frequencies)}$$\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nLooking into the output node at the drain:\n$$R_{\\text{out}} = R_D \\parallel R_{out, \\text{drain}}$$\n\nWhere $R_{out, \\text{drain}}$ is the impedance looking into the drain of the degenerated PMOS:\n$$R_{out, \\text{drain}} = r_o + R_S + g_m r_o R_S \\approx r_o (1 + g_m R_S)$$\n\n* If $r_o \\to \\infty$:\n  $$R_{\\text{out}} \\approx R_D$$\n\n---\n\n### 4. Summary of the Effects of Source Degeneration ($R_S$)\n\n| Parameter / Feature | Effect of $R_S$ | Reason |\n| :--- | :--- | :--- |\n| **Voltage Gain** | **Decreases** | Reduced by a factor of $(1 + g_m R_S)$ due to negative feedback. |\n| **Linearity** | **Improves** | Negative feedback linearizes the $V\\text{-to-}I$ conversion over a larger input swing. |\n| **Gain Stability** | **Improves** | When $g_m R_S \\gg 1$, gain depends primarily on passive ratio $R_D / R_S$ rather than process-dependent $g_m$. |\n| **Output Resistance** | **Increases** | Looking into the drain, the resistance is boosted to approximately $r_o(1 + g_m R_S)$. |\n| **Bandwidth** | **Increases** | Negative feedback trades gain for an expanded closed-loop bandwidth. |",
        "format": "markdown",
        "sha256": "6a64daa926ec1fcbce2cc8ed5e2eacf7719537c2015a4d2269504018e324d8e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS). The additional finite-ro gain expression is also consistent with the stated assumptions.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3799,
        "total_tokens": 4915,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2437,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3799,
        "total_tokens": 4915,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2437,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is an **NMOS Common-Drain (CD) Amplifier**, commonly referred to as a **Source Follower**. \n\nIn this topology:\n* The **input** ($V_{\\text{in}}$) is applied to the **Gate**.\n* The **output** ($V_{\\text{out}}$) is taken from the **Source**.\n* The **Drain** is connected to an AC ground (the DC supply rail $V_{DD}$).\n\n---\n\n### 1. DC / Large-Signal Characteristics\n\nFor the transistor $M_1$ to operate in the **saturation region** (typical for linear amplification):\n$$V_{GS} > V_{TH} \\quad \\text{and} \\quad V_{DS} \\ge V_{GS} - V_{TH}$$\n\n1. **Gate-to-Source Relationship:**\n   $$V_{\\text{out}} = V_{\\text{in}} - V_{GS}$$\n   Because $V_{GS} > 0$ for an enhancement-mode NMOS, the output voltage is \"shifted down\" by a gate-to-source voltage drop, functioning as a DC level shifter.\n\n2. **Drain Current ($I_D$):**\n   Assuming saturation and neglecting channel-length modulation:\n   $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2 = \\frac{V_{\\text{out}}}{R_S}$$\n\n---\n\n### 2. Small-Signal Analysis\n\nLet:\n* $g_m$: Transconductance of $M_1$ ($g_m = \\sqrt{2 \\mu_n C_{ox} (W/L) I_D}$)\n* $g_{mb}$: Body-effect transconductance (if the bulk is tied to ground, $v_{bs} = -v_{\\text{out}}$)\n* $r_o$: Small-signal output resistance due to channel-length modulation\n\n#### A. Voltage Gain ($A_v$)\nApplying Kirchhoff's Current Law (KCL) at the output node (source):\n$$g_m v_{gs} + g_{mb} v_{bs} + \\frac{v_{ds}}{r_o} = \\frac{v_{\\text{out}}}{R_S}$$\n\nSince $v_{gs} = v_{\\text{in}} - v_{\\text{out}}$, $v_{bs} = -v_{\\text{out}}$, and $v_{ds} = -v_{\\text{out}}$:\n$$g_m (v_{\\text{in}} - v_{\\text{out}}) - g_{mb} v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_o} = \\frac{v_{\\text{out}}}{R_S}$$\n\nRearranging for the gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{g_m}{g_m + g_{mb} + \\frac{1}{r_o} + \\frac{1}{R_S}} = \\frac{g_m (R_S \\parallel r_o)}{1 + (g_m + g_{mb})(R_S \\parallel r_o)}$$\n\n* **Ideal Case** (neglecting body effect $g_{mb} = 0$ and channel-length modulation $r_o \\to \\infty$):\n  $$A_v = \\frac{g_m R_S}{1 + g_m R_S} \\approx 1 \\quad (\\text{if } g_m R_S \\gg 1)$$\n  *(The gain is always strictly positive and slightly less than unity).*\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the gate at low frequencies:\n$$R_{\\text{in}} \\to \\infty$$\n*(In high-frequency operation, input impedance is capacitive and determined by $C_{gd}$ and the bootstrapped $C_{gs}$).*\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nLooking back into the output node (source terminal) with $v_{\\text{in}} = 0$:\n$$R_{\\text{out}} = \\frac{1}{g_m + g_{mb}} \\parallel r_o \\parallel R_S$$\n\n* Neglecting $g_{mb}$ and assuming $r_o, R_S \\gg \\frac{1}{g_m}$:\n  $$R_{\\text{out}} \\approx \\frac{1}{g_m}$$\n  *(This represents a very **low output impedance**).*\n\n---\n\n### 3. Summary of Key Characteristics & Applications\n\n| Parameter | Value / Characteristic |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\approx 1$ (Non-inverting, slightly less than unity) |\n| **Input Impedance ($R_{\\text{in}}$)** | Very high ($\\approx \\infty$ at DC) |\n| **Output Impedance ($R_{\\text{out}}$)** | Low ($\\approx 1/g_m$) |\n\n#### Primary Applications:\n1. **Voltage Buffer:** It prevents loading effects by interfacing high-impedance nodes to low-impedance loads without significantly attenuating the signal amplitude.\n2. **DC Level Shifter:** Used to adjust the DC operating point between subsequent stages by $V_{GS}$.",
        "format": "markdown",
        "sha256": "96eed971f11fd8c384a9e07019fd3b7adbe161e2c17d9354184092ac4030160a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the required ideal expression. The body-effect and output-resistance refinements are also appropriate.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 2880,
        "total_tokens": 3991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1684,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 2880,
        "total_tokens": 3991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1684,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is an **NMOS Common-Drain (CD) Amplifier**, more commonly known as a **Source Follower**. \n\nBelow is a detailed analysis covering its operating principles, DC behavior, small-signal characteristics, and practical limitations.\n\n---\n\n### 1. Circuit Identification and Role\n* **Input Terminal:** Gate ($V_{\\text{in}}$)\n* **Output Terminal:** Source ($V_{\\text{out}}$)\n* **Common AC Terminal:** Drain (connected to $V_{DD}$, which is AC ground)\n* **Load:** Source resistor $R_S$\n* **Primary Application:** **Voltage Buffer** (provides unity-like voltage gain, extremely high input impedance, and relatively low output impedance, preventing loading effects when driving low-impedance stages).\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nAssuming the transistor $M_1$ operates in the **saturation region**:\n\n1. **Drain Current ($I_D$):**\n   $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2$$\n   where:\n   * $V_{GS} = V_{\\text{in}} - V_{\\text{out}}$\n   * $V_{\\text{out}} = I_D R_S$\n\n2. **DC Level Shift:**\n   $$V_{\\text{out}} = V_{\\text{in}} - V_{GS}$$\n   The output voltage is a level-shifted version of the input, shifted downward by one gate-to-source voltage drop ($V_{GS} = V_{TH} + V_{ov}$).\n\n3. **Saturation Condition:**\n   To remain in saturation:\n   $$V_{DS} \\ge V_{GS} - V_{TH}$$\n   $$(V_{DD} - V_{\\text{out}}) \\ge (V_{\\text{in}} - V_{\\text{out}}) - V_{TH} \\implies V_{\\text{in}} \\le V_{DD} + V_{TH}$$\n   This condition is easily met for most input swings within normal operating supply levels.\n\n---\n\n### 3. Small-Signal AC Analysis\n\nUsing the standard hybrid-$\\pi$ small-signal model for the MOSFET, with transconductance $g_m$, body-effect transconductance $g_{mb}$, and channel-length modulation resistance $r_o$:\n\n#### A. Voltage Gain ($A_v$)\nApplying Kirchhoff's Current Law (KCL) at the source node ($V_{\\text{out}}$):\n$$g_m v_{gs} + g_{mb} v_{bs} = \\frac{v_{\\text{out}}}{R_S} + \\frac{v_{\\text{out}}}{r_o}$$\n\nSince $v_{gs} = v_{\\text{in}} - v_{\\text{out}}$ and the substrate/body is typically tied to ground ($v_{bs} = -v_{\\text{out}}$):\n$$g_m (v_{\\text{in}} - v_{\\text{out}}) - g_{mb} v_{\\text{out}} = v_{\\text{out}} \\left( \\frac{1}{R_S} + \\frac{1}{r_o} \\right)$$\n\nRearranging for the voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{g_m}{g_m + g_{mb} + \\frac{1}{r_o} + \\frac{1}{R_S}} = \\frac{g_m (R_S \\parallel r_o)}{1 + (g_m + g_{mb})(R_S \\parallel r_o)}$$\n\n* **Ideal Case** (neglecting body effect $g_{mb} = 0$ and channel-length modulation $r_o \\to \\infty$):\n  $$A_v = \\frac{g_m R_S}{1 + g_m R_S} \\approx 1 \\quad (\\text{if } g_m R_S \\gg 1)$$\n  The gain is positive (non-inverting) and strictly less than 1.\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the gate:\n$$R_{\\text{in}} \\to \\infty \\quad (\\text{at low frequencies})$$\nBecause the gate is insulated by the gate oxide, it draws negligible DC current.\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nTo find the output resistance, set the input signal to zero ($v_{\\text{in}} = 0$) and apply a test voltage $v_x$ at the output node:\n* Looking into the source of $M_1$:\n  $$R_{\\text{out, transistor}} = \\frac{1}{g_m + g_{mb}} \\parallel r_o \\approx \\frac{1}{g_m}$$\n* Total output resistance (including $R_S$):\n  $$R_{\\text{out}} = \\frac{1}{g_m + g_{mb}} \\parallel r_o \\parallel R_S \\approx \\frac{1}{g_m} \\parallel R_S \\approx \\frac{1}{g_m}$$\n\nSince transconductance $g_m$ is typically on the order of several $\\text{mA/V}$, $R_{\\text{out}}$ is relatively low (hundreds of ohms).\n\n---\n\n### 4. Key Limitations and Practical Considerations\n\n1. **Body Effect and Non-Linearity:**\n   * In a standard n-well process, the bulk (substrate) of NMOS transistors is connected to ground. As $V_{\\text{out}}$ varies, the source-to-bulk voltage ($V_{SB} = V_{\\text{out}}$) changes.\n   * This causes the threshold voltage $V_{TH}$ to vary dynamically:\n     $$V_{TH} = V_{TH0} + \\gamma \\left(\\sqrt{2\\phi_F + V_{SB}} - \\sqrt{2\\phi_F}\\right)$$\n   * This non-linear relationship between $V_{TH}$ and $V_{\\text{out}}$ leads to **harmonic distortion** and reduces the effective gain by introducing $g_{mb} = \\eta g_m$.\n\n2. **DC Level Shift:**\n   * The output DC level is always lower than the input DC level by $V_{GS}$. In multi-stage amplifiers, this limits the cascading of source followers without alternating with PMOS followers or using level-shifting techniques.\n\n3. **Voltage Swing Headroom:**\n   * **Maximum output voltage:** Limited by $M_1$ entering the triode region or reaching $V_{DD}$.\n   * **Minimum output voltage:** Limited as $V_{\\text{in}}$ approaches $V_{TH}$, below which $M_1$ enters the subthreshold/cutoff region.\n\n---\n\n### 5. Summary Table\n\n| Parameter | Ideal Expression | Typical Practical Value |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\frac{g_m R_S}{1 + g_m R_S}$ | $0.7 - 0.9 \\, \\text{V/V}$ |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ | Extremely high ($> 10^{10} \\, \\Omega$) |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\frac{1}{g_m} \\parallel R_S \\approx \\frac{1}{g_m}$ | Low to moderate ($50 - 500 \\, \\Omega$) |\n| **Phase Shift** | $0^\\circ$ | Non-inverting |",
        "format": "markdown",
        "sha256": "74787736d9b37c0991cd1f60ad8e7e99cbae1299b89973c33761645fb11e84ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain gm·RS/(1 + gm·RS). The additional analysis is supplementary and does not undermine the essential result.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3501,
        "total_tokens": 4612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1785,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3501,
        "total_tokens": 4612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1785,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is an **NMOS Common-Drain (CD) Amplifier**, commonly referred to as a **Source Follower**. \n\nIn this topology, the input signal $V_{\\text{in}}$ is applied to the gate, the drain is connected to the positive supply rail $V_{DD}$ (which acts as an AC ground), and the output $V_{\\text{out}}$ is taken from the source terminal across the source resistor $R_S$.\n\n---\n\n### 1. Circuit Function and Overview\n* **Primary Role:** Serves as a **voltage buffer** (impedance transformer).\n* **Key Characteristics:**\n  * High input impedance ($R_{\\text{in}} \\approx \\infty$).\n  * Low output impedance ($R_{\\text{out}} \\approx 1/g_m$).\n  * Voltage gain slightly less than unity ($A_v \\lesssim 1$).\n  * In-phase input and output (non-inverting).\n\n---\n\n### 2. Large-Signal (DC) Operation\n\nAssuming the transistor $M_1$ operates in the **saturation region**:\n$$I_D = \\frac{1}{2} \\mu_n C_{\\text{ox}} \\frac{W}{L} (V_{GS} - V_{\\text{TH}})^2$$\n\nSince the drain current also flows through $R_S$:\n$$I_D = \\frac{V_{\\text{out}}}{R_S}$$\n\nEquating the two:\n$$\\frac{V_{\\text{out}}}{R_S} = \\frac{1}{2} \\mu_n C_{\\text{ox}} \\frac{W}{L} (V_{\\text{in}} - V_{\\text{out}} - V_{\\text{TH}})^2$$\n\n* **Level Shift:** The source tracks the gate voltage with a DC shift:\n  $$V_{\\text{out}} = V_{\\text{in}} - V_{GS}$$\n* **Condition for Saturation:**\n  $$V_{DS} \\ge V_{GS} - V_{\\text{TH}} \\implies V_{DD} - V_{\\text{out}} \\ge (V_{\\text{in}} - V_{\\text{out}}) - V_{\\text{TH}} \\implies V_{DD} \\ge V_{\\text{in}} - V_{\\text{TH}}$$\n  To keep $M_1$ in saturation, the input voltage must satisfy $V_{\\text{in}} \\le V_{DD} + V_{\\text{TH}}$.\n\n---\n\n### 3. Small-Signal Analysis\n\nLet:\n* $g_m$: Transconductance of $M_1$ ($g_m = \\mu_n C_{\\text{ox}} \\frac{W}{L}(V_{GS} - V_{\\text{TH}})$)\n* $g_{mb}$: Body-effect transconductance ($g_{mb} = \\eta g_m$, where $\\eta \\approx 0.1 - 0.3$)\n* $r_o$: Output resistance due to channel-length modulation ($r_o = \\frac{1}{\\lambda I_D}$)\n\n#### A. Voltage Gain ($A_v$)\nUsing Kirchhoff's Current Law (KCL) at the source node:\n$$g_m v_{gs} + g_{mb} v_{bs} + \\frac{v_{ds}}{r_o} = \\frac{v_{\\text{out}}}{R_S}$$\n\nSince the gate is at $v_{\\text{in}}$, the drain is at AC ground, and the substrate/body is typically tied to ground ($v_{bs} = -v_{\\text{out}}$):\n$$v_{gs} = v_{\\text{in}} - v_{\\text{out}}, \\quad v_{bs} = -v_{\\text{out}}, \\quad v_{ds} = -v_{\\text{out}}$$\n\nSubstituting these relationships:\n$$g_m(v_{\\text{in}} - v_{\\text{out}}) - g_{mb} v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_o} = \\frac{v_{\\text{out}}}{R_S}$$\n\nRearranging for the voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{g_m}{g_m + g_{mb} + \\frac{1}{r_o} + \\frac{1}{R_S}} = \\frac{g_m (R_S \\parallel r_o)}{1 + (g_m + g_{mb})(R_S \\parallel r_o)}$$\n\n* **Ideal Case** (neglecting body effect $g_{mb}=0$ and channel-length modulation $r_o \\to \\infty$):\n  $$A_v = \\frac{g_m R_S}{1 + g_m R_S} = \\frac{R_S}{\\frac{1}{g_m} + R_S}$$\n  If $g_m R_S \\gg 1$, then:\n  $$A_v \\approx 1$$\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the gate:\n$$R_{\\text{in}} \\to \\infty \\quad \\text{(at low frequencies)}$$\nAt high frequencies, the gate-to-source capacitance $C_{gs}$ is bootstrapped:\n$$C_{\\text{in}} \\approx C_{gd} + C_{gs}(1 - A_v)$$\nSince $A_v \\approx 1$, the Miller effect significantly reduces the effective capacitance contributed by $C_{gs}$, allowing very high input impedance even at moderately high frequencies.\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nSetting the input $v_{\\text{in}} = 0$ and applying an external test voltage $v_x$ at the output node:\n* $v_{gs} = -v_x$\n* $v_{bs} = -v_x$\n\nThe current drawn from $v_x$ is:\n$$i_x = g_m v_x + g_{mb} v_x + \\frac{v_x}{r_o} + \\frac{v_x}{R_S}$$\n\nThus:\n$$R_{\\text{out}} = \\frac{v_x}{i_x} = \\frac{1}{g_m + g_{mb} + \\frac{1}{r_o} + \\frac{1}{R_S}} = \\frac{1}{g_m + g_{mb}} \\parallel r_o \\parallel R_S$$\n\n* **Approximation** (since typically $1/g_m \\ll R_S, r_o$):\n  $$R_{\\text{out}} \\approx \\frac{1}{g_m + g_{mb}} \\approx \\frac{1}{g_m}$$\nThis low output resistance makes the circuit suitable for driving heavy (low-impedance) loads without suffering significant gain degradation.\n\n---\n\n### 4. Key Trade-offs and Non-Idealities\n\n1. **Body Effect & Linearity:**\n   Because the bulk is usually tied to ground while the source voltage varies with the output, the source-to-bulk voltage $V_{SB} = V_{\\text{out}}$ is non-zero and signal-dependent. This modulates $V_{\\text{TH}}$, introducing harmonic distortion and reducing the gain below 1:\n   $$A_v \\approx \\frac{g_m}{g_m + g_{mb}} = \\frac{1}{1 + \\eta} \\approx 0.7 - 0.9$$\n\n2. **DC Voltage Offset:**\n   The output is inherently offset by $V_{GS}$ below the input ($V_{\\text{out}} = V_{\\text{in}} - V_{GS}$), which reduces the available DC headroom for subsequent stages.\n\n3. **Voltage Swing Limits:**\n   * **Maximum output:** Limited by transistor entry into the triode region: $V_{\\text{out,max}} \\approx V_{DD} - V_{OV}$.\n   * **Minimum output:** Limited by transistor cutoff ($I_D \\to 0$, $V_{\\text{out}} \\to 0\\text{ V}$).\n\n---\n\n### Summary of Small-Signal Parameters\n\n| Parameter | Exact Expression | Typical Approximation |\n| :--- | :---: | :---: |\n| **Voltage Gain ($A_v$)** | $\\dfrac{g_m (R_S \\parallel r_o)}{1 + (g_m + g_{mb})(R_S \\parallel r_o)}$ | $\\dfrac{g_m}{g_m + g_{mb}} \\lesssim 1$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\infty$ | $\\infty$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\dfrac{1}{g_m + g_{mb}} \\parallel r_o \\parallel R_S$ | $\\dfrac{1}{g_m}$ |",
        "format": "markdown",
        "sha256": "4e0609f9e8353fc2cd35fcd6804916e4030f304a672bcd077f9bf828fcbf0709"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the required ideal expression. The added body-effect, output-resistance, and operating-region analysis is supplementary.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 4244,
        "total_tokens": 5355,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 4244,
        "total_tokens": 5355,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit is an **NMOS Common-Gate (CG) Amplifier** with a resistive load ($R_D$). \n\nIn this topology:\n* The **gate** is connected directly to the positive supply rail $V_{DD}$, making it an AC small-signal ground ($v_g = 0$).\n* The **input** ($V_{\\text{in}}$) is applied to the **source** terminal.\n* The **output** ($V_{\\text{out}}$) is taken from the **drain** terminal.\n\n---\n\n### 1. DC and Large-Signal Analysis (Transfer Characteristics)\n\nThe gate voltage is fixed at $V_G = V_{DD}$. The gate-to-source voltage is therefore:\n$$V_{GS} = V_{DD} - V_{\\text{in}}$$\n\nDepending on the input voltage $V_{\\text{in}}$, the transistor operates in one of three regions:\n\n#### A. Cutoff Region ($V_{\\text{in}} > V_{DD} - V_{TH}$)\n* When $V_{\\text{in}}$ is high such that $V_{GS} < V_{TH}$ (i.e., $V_{\\text{in}} > V_{DD} - V_{TH}$), the transistor is **OFF**.\n* No current flows through the load resistor ($I_D = 0$).\n* **Output voltage:**\n  $$V_{\\text{out}} = V_{DD}$$\n\n#### B. Saturation Region ($V_{\\text{in,triode}} \\le V_{\\text{in}} \\le V_{DD} - V_{TH}$)\n* As $V_{\\text{in}}$ decreases below $V_{DD} - V_{TH}$, $M_1$ turns **ON** in saturation, provided $V_{DS} \\ge V_{GS} - V_{TH}$ (which simplifies to $V_{\\text{out}} \\ge V_{DD} - V_{TH}$).\n* Neglecting channel-length modulation, the drain current is:\n  $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n* **Output voltage:**\n  $$V_{\\text{out}} = V_{DD} - I_D R_D = V_{DD} - \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} R_D (V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n* As $V_{\\text{in}}$ decreases, $I_D$ increases and $V_{\\text{out}}$ drops.\n\n#### C. Triode (Linear) Region ($V_{\\text{in}} < V_{\\text{in,triode}}$)\n* When $V_{\\text{out}}$ falls below $V_{DD} - V_{TH}$, $M_1$ enters the triode region.\n* In this region:\n  $$I_D = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_{DD} - V_{\\text{in}} - V_{TH})(V_{\\text{out}} - V_{\\text{in}}) - \\frac{1}{2}(V_{\\text{out}} - V_{\\text{in}})^2 \\right]$$\n* As $V_{\\text{in}} \\to 0$, $M_1$ acts essentially as a resistor ($R_{\\text{on}}$), forming a resistive divider between $R_D$ and $R_{\\text{on}}$, pulling $V_{\\text{out}}$ close to $0\\text{ V}$.\n\n---\n\n### 2. Small-Signal Analysis\n\nAssuming $M_1$ is biased in the **saturation region**:\n\n#### A. Small-Signal Voltage Gain ($A_v$)\n1. **Ideal Case** (neglecting body effect $\\eta = 0$ and channel-length modulation $r_O \\to \\infty$):\n   * Gate is at AC ground: $v_{gs} = -v_{\\text{in}}$\n   * Drain current: $i_d = g_m v_{gs} = -g_m v_{\\text{in}}$\n   * Output voltage: $v_{\\text{out}} = -i_d R_D = g_m R_D v_{\\text{in}}$\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = +g_m R_D$$\n   *(Note: Unlike the Common-Source stage, the CG stage is **non-inverting**).*\n\n2. **Including Body Effect ($g_{mb}$):**\n   * Since the body is typically grounded, $v_{bs} = -v_{\\text{in}}$.\n   $$A_v = (g_m + g_{mb}) R_D$$\n\n3. **Including Channel-Length Modulation ($r_O$):**\n   $$A_v = \\frac{(g_m + g_{mb})r_O + 1}{r_O + R_D} R_D \\approx \\frac{(g_m + g_{mb})R_D}{1 + \\frac{R_D}{r_O}}$$\n\n---\n\n#### B. Input Resistance ($R_{\\text{in}}$)\nLooking into the source terminal:\n* **Ideal Case ($r_O \\to \\infty$):**\n  $$R_{\\text{in}} = \\frac{1}{g_m + g_{mb}} \\approx \\frac{1}{g_m}$$\n* **With Finite Output Resistance ($r_O$):**\n  $$R_{\\text{in}} = \\frac{R_D + r_O}{1 + (g_m + g_{mb}) r_O}$$\nBecause $1/g_m$ is typically on the order of tens to hundreds of ohms, the common-gate stage exhibits a **relatively low input impedance**.\n\n---\n\n#### C. Output Resistance ($R_{\\text{out}}$)\nLooking into the drain terminal:\n* Looking downward into the drain with an ideal source ($R_S = 0$):\n  $$R_{\\text{out,drain}} = r_O$$\n* In parallel with the load resistor $R_D$:\n  $$R_{\\text{out}} = R_D \\parallel r_O \\approx R_D \\quad (\\text{if } r_O \\gg R_D)$$\n\n---\n\n### 3. Key Properties and Applications\n\n| Parameter | Value / Characteristic |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | Positive (Non-inverting), moderately high ($g_m R_D$) |\n| **Input Resistance ($R_{\\text{in}}$)** | Low ($\\approx 1/g_m$) |\n| **Output Resistance ($R_{\\text{out}}$)** | Moderate to high ($\\approx R_D$) |\n| **Phase Shift** | $0^\\circ$ (in-phase) |\n\n* **Absence of Miller Effect:** Because the gate is tied to AC ground, the gate-drain overlap capacitance $C_{gd}$ is connected between the output and AC ground (rather than bridging input and output). Consequently, there is no Miller multiplication of $C_{gd}$, enabling **wide bandwidth** and superior **high-frequency performance**.\n* **Typical Uses:**\n  1. **Current Buffering:** Passing a current from a low-impedance input to a high-impedance output.\n  2. **RF Input Matching:** The low input resistance ($1/g_m$) can be designed to match a $50\\,\\Omega$ antenna/transmission line directly.\n  3. **Cascode Stages:** Used as the upper transistor in a cascode amplifier to boost output impedance and reduce the Miller capacitance of the input device.",
        "format": "markdown",
        "sha256": "86979e6c34bc2e20abb582527e4ec88f2026211bc19060956f98cde18b577714"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology, gives the non-inverting gain and low input resistance, and its additional small-signal relations are consistent with the circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 8509,
        "total_tokens": 9591,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 8509,
        "total_tokens": 9591,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a detailed analysis of the circuit covering its topology, large-signal (DC transfer) characteristics, and small-signal behavior.\n\n---\n\n### 1. Circuit Identification and Overview\n\n* **Configuration:** **Common-Gate (CG) Amplifier** with a resistive load.\n* **Transistor:** N-channel MOSFET ($M_1$).\n* **Input Node ($V_{\\text{in}}$):** Applied at the **source** terminal.\n* **Output Node ($V_{\\text{out}}$):** Taken at the **drain** terminal.\n* **Gate Terminal:** Tied to the DC supply voltage $V_{DD}$ (which serves as an **AC ground** with a fixed gate bias $V_G = V_{DD}$).\n* **Load:** Drain resistor $R_D$ tied to $V_{DD}$.\n\n---\n\n### 2. Large-Signal Analysis (DC Transfer Characteristics)\n\nAssuming the bulk/body terminal is tied to ground ($V_B = 0$):\n* Gate voltage: $V_G = V_{DD}$\n* Source voltage: $V_S = V_{\\text{in}}$\n* Gate-to-source voltage: $V_{GS} = V_{DD} - V_{\\text{in}}$\n\nAs the input voltage $V_{\\text{in}}$ varies from $V_{DD}$ down to $0$, the transistor moves through three distinct operating regions:\n\n#### Region I: Cut-off ($V_{\\text{in}} > V_{DD} - V_{TH}$)\n* Since $V_{GS} < V_{TH}$, the transistor is **OFF**.\n* No drain current flows ($I_D = 0$).\n* Output voltage:\n  $$V_{\\text{out}} = V_{DD}$$\n\n#### Region II: Saturation Region ($V_{\\text{in,tri}} \\le V_{\\text{in}} \\le V_{DD} - V_{TH}$)\n* When $V_{\\text{in}}$ drops below $V_{DD} - V_{TH}$, $M_1$ turns **ON**.\n* Because $V_{\\text{out}}$ starts near $V_{DD}$, the drain-to-source voltage satisfies $V_{DS} \\ge V_{GS} - V_{TH}$ ($V_{\\text{out}} \\ge V_{DD} - V_{TH}$), placing $M_1$ in saturation.\n* Neglecting channel-length modulation ($\\lambda = 0$):\n  $$I_D = \\frac{1}{2}\\mu_n C_{ox} \\frac{W}{L} (V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n* The output voltage drops quadratically as $V_{\\text{in}}$ decreases:\n  $$V_{\\text{out}} = V_{DD} - I_D R_D = V_{DD} - \\frac{1}{2}\\mu_n C_{ox} \\frac{W}{L} R_D (V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n\n#### Region III: Triode (Linear) Region ($0 \\le V_{\\text{in}} < V_{\\text{in,tri}}$)\n* $M_1$ enters the triode region when $V_{\\text{out}} = V_{DD} - V_{TH}$, which occurs at an input voltage:\n  $$V_{\\text{in,tri}} = V_{DD} - V_{TH} - \\sqrt{\\frac{2V_{TH}}{\\mu_n C_{ox} \\frac{W}{L} R_D}}$$\n* For $V_{\\text{in}} < V_{\\text{in,tri}}$, the current is given by:\n  $$I_D = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_{DD} - V_{\\text{in}} - V_{TH})(V_{\\text{out}} - V_{\\text{in}}) - \\frac{1}{2}(V_{\\text{out}} - V_{\\text{in}})^2 \\right]$$\n* As $V_{\\text{in}} \\to 0$, $M_1$ acts primarily as an on-resistance $R_{\\text{on}}$, forming a resistive divider with $R_D$:\n  $$V_{\\text{out}} \\approx V_{DD} \\left(\\frac{R_{\\text{on}}}{R_D + R_{\\text{on}}}\\right)$$\n\n*(Note on Body Effect: Because $V_S = V_{\\text{in}} > 0$ and $V_B = 0$, the body-source reverse bias $V_{SB} = V_{\\text{in}}$ causes $V_{TH}$ to increase as $V_{\\text{in}}$ rises: $V_{TH} = V_{TH0} + \\gamma(\\sqrt{2\\phi_F + V_{\\text{in}}} - \\sqrt{2\\phi_F})$).*\n\n---\n\n### 3. Small-Signal Analysis (Biased in Saturation)\n\nIn saturation, using the small-signal model where $v_g = 0$ (AC ground), $v_s = v_{\\text{in}}$, and $v_b = 0$:\n$$v_{gs} = -v_{\\text{in}}, \\quad v_{bs} = -v_{\\text{in}}$$\n\n#### A. Voltage Gain ($A_v$)\n1. **Ideal Case ($\\lambda = 0$, $\\gamma = 0$):**\n   $$i_d = g_m v_{gs} = -g_m v_{\\text{in}}$$\n   $$v_{\\text{out}} = -i_d R_D = g_m R_D v_{\\text{in}}$$\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = +g_m R_D$$\n   *(The amplifier is **non-inverting**).*\n\n2. **Including Body Effect ($\\gamma > 0$, $\\lambda = 0$):**\n   $$A_v = (g_m + g_{mb})R_D = g_m(1 + \\eta)R_D$$\n   where $\\eta = \\frac{g_{mb}}{g_m} = \\frac{\\gamma}{2\\sqrt{2\\phi_F + V_{SB}}}$. Body effect increases the effective transconductance and gain.\n\n3. **Including Channel-Length Modulation ($r_O$):**\n   Applying KCL at the output node gives:\n   $$A_v = \\frac{(g_m + g_{mb})r_O + 1}{r_O + R_D} R_D$$\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the source terminal:\n* **Neglecting $r_O$:**\n  $$R_{\\text{in}} = \\frac{1}{g_m + g_{mb}}$$\n* **Including $r_O$ and load $R_D$:**\n  $$R_{\\text{in}} = \\frac{R_D + r_O}{1 + (g_m + g_{mb})r_O} \\approx \\frac{1}{g_m + g_{mb}} + \\frac{R_D}{(g_m + g_{mb})r_O}$$\n\nThe input impedance is characteristically **low**, making the circuit suitable as a current buffer or for impedance matching.\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nSetting the input source $v_{\\text{in}} = 0$ (source connected to AC ground):\n* Since $v_s = 0$ and $v_g = 0$, $v_{gs} = 0$, turning off the dependent current source.\n* The impedance looking down into the drain is simply $r_O$.\n* In parallel with the drain load:\n  $$R_{\\text{out}} = R_D \\parallel r_O \\approx R_D \\quad (\\text{if } r_O \\gg R_D)$$\n\n---\n\n### 4. Summary of Key Characteristics\n\n| Parameter | Expression (Approximate) | Characteristic |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $+(g_m + g_{mb}) R_D$ | Non-inverting, moderate-to-high gain |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\approx \\frac{1}{g_m + g_{mb}}$ | Low |\n| **Output Impedance ($R_{\\text{out}}$)** | $R_D \\parallel r_O \\approx R_D$ | Moderate to High |\n| **Miller Effect** | None on $C_{gd}$ | Gate is grounded, suppressing the Miller effect; excellent high-frequency response. |",
        "format": "markdown",
        "sha256": "1f765c1e782df69f68acc40b9725000f364c2a22c29d1bf5e9eb25e2a3c719b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the key non-inverting gain and low input-resistance results. The additional body-effect and large-signal discussion is secondary and does not undermine the essential analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 8128,
        "total_tokens": 9210,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6177,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 8128,
        "total_tokens": 9210,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6177,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is an **NMOS Common-Gate (CG) amplifier** where the gate is directly tied to the supply voltage $V_{DD}$, the input signal $V_{\\text{in}}$ is applied at the source, and the output $V_{\\text{out}}$ is taken from the drain through a load resistor $R_D$.\n\n---\n\n### 1. Large-Signal / DC Analysis (Transfer Characteristics)\n\nTo understand how $V_{\\text{out}}$ behaves as a function of the DC input voltage $V_{\\text{in}}$, we evaluate the transistor's operating regions as $V_{\\text{in}}$ varies from $V_{DD}$ down to $0$:\n\n#### A. Cutoff Region ($V_{\\text{in}} > V_{DD} - V_{TH}$)\n* **Condition:** $V_{GS} < V_{TH} \\implies V_{DD} - V_{\\text{in}} < V_{TH} \\implies V_{\\text{in}} > V_{DD} - V_{TH}$.\n* **Current:** $I_D = 0$.\n* **Output Voltage:** \n  $$V_{\\text{out}} = V_{DD}$$\n\n---\n\n#### B. Saturation Region ($V_{\\text{in,triode}} \\le V_{\\text{in}} \\le V_{DD} - V_{TH}$)\nAs $V_{\\text{in}}$ drops below $V_{DD} - V_{TH}$, $M_1$ turns on.\n* **Saturation condition:** \n  $$V_{DS} \\ge V_{GS} - V_{TH} \\implies (V_{\\text{out}} - V_{\\text{in}}) \\ge (V_{DD} - V_{\\text{in}} - V_{TH})$$\n  $$V_{\\text{out}} \\ge V_{DD} - V_{TH}$$\n  Notice that $V_{\\text{in}}$ cancels out. Since $V_{\\text{out}} = V_{DD} - I_D R_D$, the condition for saturation simplifies directly to:\n  $$I_D R_D \\le V_{TH}$$\n* **Drain Current:**\n  $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n* **Output Voltage:**\n  $$V_{\\text{out}} = V_{DD} - \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} R_D (V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n  Here, $V_{\\text{out}}$ decreases quadratically as $V_{\\text{in}}$ decreases.\n\n> **Important Design Implication:** Because the gate is tied to $V_{DD}$, the maximum allowable DC voltage drop across $R_D$ while keeping $M_1$ in saturation is strictly limited to one threshold voltage ($V_{TH}$). This limits the maximum output voltage swing and the achievable gain in saturation.\n\n---\n\n#### C. Triode (Linear) Region ($V_{\\text{in}} < V_{\\text{in,triode}}$)\nWhen $V_{\\text{in}}$ drops low enough such that $I_D R_D > V_{TH}$ (i.e., $V_{\\text{out}} < V_{DD} - V_{TH}$), $M_1$ enters the triode region.\n* **Drain Current:**\n  $$I_D = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_{DD} - V_{\\text{in}} - V_{TH})(V_{\\text{out}} - V_{\\text{in}}) - \\frac{1}{2}(V_{\\text{out}} - V_{\\text{in}})^2 \\right]$$\n* As $V_{\\text{in}} \\to 0$, $M_1$ acts increasingly like a low-resistance switch, pulling $V_{\\text{out}}$ closer to $V_{\\text{in}}$.\n\n---\n\n### 2. Small-Signal Analysis\n\nAssuming $M_1$ is biased in the **saturation region**, the gate is tied to $V_{DD}$ (which acts as an AC ground: $v_g = 0$).\n\n#### A. Voltage Gain ($A_v$)\n1. **Ideal Case ($\\lambda = 0$, ignoring body effect $\\eta = 0$):**\n   * $v_{gs} = v_g - v_s = 0 - v_{\\text{in}} = -v_{\\text{in}}$\n   * Small-signal drain current: $i_d = g_m v_{gs} = -g_m v_{\\text{in}}$\n   * Output voltage: $v_{\\text{out}} = -i_d R_D = g_m R_D v_{\\text{in}}$\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = +g_m R_D$$\n   *(The amplifier is **non-inverting**).*\n\n2. **Including Body Effect ($g_{mb}$):**\n   Because the substrate/bulk is typically connected to ground ($V_B = 0$), $v_{bs} = -v_{\\text{in}}$:\n   $$A_v = (g_m + g_{mb}) R_D$$\n\n3. **Including Channel-Length Modulation ($r_O$):**\n   Using KCL at the output node:\n   $$\\frac{v_{\\text{out}}}{R_D} + g_m(-v_{\\text{in}}) + g_{mb}(-v_{\\text{in}}) + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_O} = 0$$\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{1 + (g_m + g_{mb})r_O}{r_O + R_D} R_D$$\n\n---\n\n#### B. Input Resistance ($R_{\\text{in}}$)\nLooking into the source terminal:\n* **Without $r_O$:**\n  $$R_{\\text{in}} = \\frac{1}{g_m + g_{mb}}$$\n* **With finite $r_O$ and load $R_D$:**\n  $$R_{\\text{in}} = \\frac{R_D + r_O}{1 + (g_m + g_{mb})r_O}$$\n\nBecause $R_{\\text{in}}$ is relatively small (typically on the order of tens to hundreds of ohms), the stage presents a low input impedance.\n\n---\n\n#### C. Output Resistance ($R_{\\text{out}}$)\nLooking into the drain terminal:\n* Assuming an ideal source with source resistance $R_S = 0$:\n  $$R_{\\text{out}} = R_D \\parallel r_O \\approx R_D$$\n* If an input source resistance $R_S$ is present:\n  $$R_{\\text{out}} = R_D \\parallel \\left[ r_O + (1 + (g_m + g_{mb})r_O)R_S \\right]$$\n\n---\n\n### 3. Summary of Characteristics\n\n| Parameter | Value (Approximation) | Note |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $+(g_m + g_{mb})R_D$ | Non-inverting |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\approx \\frac{1}{g_m + g_{mb}}$ | Relatively low |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\approx R_D$ | Set primarily by $R_D$ |\n| **High-Frequency Performance** | Excellent | No Miller multiplication on $C_{gd}$ |\n\n### 4. Key Advantages and Drawbacks\n* **Advantage (High Speed):** The gate is at AC ground, which eliminates the Miller effect on the gate-drain overlap capacitance ($C_{gd}$). Consequently, the common-gate topology exhibits very high bandwidth.\n* **Advantage (Impedance Matching):** Its naturally low input impedance makes it well-suited for current buffers and RF receivers where matching to a $50\\,\\Omega$ antenna/cable is required.\n* **Drawback (Headroom Limitation):** Tying the gate to $V_{DD}$ eliminates the need for an extra bias line, but limits the voltage drop across $R_D$ in saturation to $V_{TH}$, severely restricting the output swing and maximum achievable gain.",
        "format": "markdown",
        "sha256": "dd8e5cc2a028b1ce08e1dce9fa89b10e079b6820dda303c5d80374c1a8e59f40"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input common-gate topology and gives the non-inverting gain and low input resistance, including reasonable finite-output-resistance refinements. The additional analysis does not undermine the essential result.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 7565,
        "total_tokens": 8647,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 7565,
        "total_tokens": 8647,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is a comprehensive analysis of the circuit.\n\n---\n\n### 1. Circuit Identification and Intended Function\n* **Transistor Type:** $M_1$ is an **NMOS** transistor.\n* **Intended Topology:** **Common-Gate (CG) Amplifier**\n  * The gate is biased at a constant DC potential ($V_b$).\n  * The input signal $V_{\\text{in}}$ is capacitively coupled to the source via $C_1$.\n  * The output $V_{\\text{out}}$ is taken at the drain across the load resistor $R_D$.\n\n---\n\n### 2. DC Operating Point (Large-Signal Analysis)\n* **Gate Voltage:** $V_{G} = V_b$\n* **Source Voltage:** The source is tied directly to ground:\n  $$V_{S} = 0\\text{ V}$$\n* **Gate-to-Source Voltage:** \n  $$V_{GS} = V_G - V_S = V_b$$\n* **Drain Current ($I_D$):** \n  Assuming $V_b > V_{TH}$ (threshold voltage) and the transistor operates in saturation:\n  $$I_D = \\frac{1}{2}\\mu_n C_{ox} \\frac{W}{L}(V_b - V_{TH})^2$$\n* **DC Output Voltage:**\n  $$V_{\\text{out,DC}} = V_{DD} - I_D R_D$$\n  *(For saturation, we require $V_{\\text{out,DC}} \\ge V_b - V_{TH}$.)*\n\nFrom a DC standpoint, the direct connection to ground provides a return path for the bias current $I_D$, establishing a valid operating point.\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\n#### a. Gate and Source Voltages\n* The gate is held at a fixed DC voltage ($V_b$), so:\n  $$v_g = 0$$\n* The source is hardwired directly to ground, so:\n  $$v_s = 0$$\n\n#### b. Small-Signal Gate-to-Source Voltage ($v_{gs}$)\n$$v_{gs} = v_g - v_s = 0 - 0 = 0$$\n\n#### c. Small-Signal Output Voltage and Gain\nBecause $v_{gs} = 0$ (and $v_{bs} = 0$), the transistor's small-signal controlled current source produces no signal current:\n$$g_m v_{gs} = 0$$\n\nConsequently, no alternating current is injected into the drain node from the input:\n$$v_{\\text{out}} = 0$$\n\nTherefore, the small-signal voltage gain is:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0$$\n\n#### d. Input and Output Impedance\n* **Input Impedance ($Z_{\\text{in}}$):** \n  Because the node after $C_1$ is connected directly to ground, the input source is loaded solely by the coupling capacitor to ground:\n  $$Z_{\\text{in}} = \\frac{1}{sC_1}$$\n* **Output Impedance ($R_{\\text{out}}$):**\n  Looking into the drain with $v_s = 0$:\n  $$R_{\\text{out}} = R_D \\parallel r_O$$\n  *(where $r_O$ is the transistor output resistance due to channel-length modulation).*\n\n---\n\n### 4. Critical Design Flaw (Textbook Insight)\nThis is a classic problem (frequently presented in analog design textbooks by Behzad Razavi) illustrating a **fatal biasing flaw in common-gate stages**:\n\n* While tying the source directly to ground provides a path for the DC bias current, **it grounds the AC signal node**. \n* The input signal $V_{\\text{in}}$ is shorted directly to ground through capacitor $C_1$, preventing any signal from reaching the source of $M_1$. As a result, the circuit **cannot function as an amplifier**.\n\n---\n\n### 5. How to Fix the Circuit\nTo make this circuit work properly:\n1. **Insert a Source Resistor ($R_S$) or Current Source ($I_{SS}$)** between the source terminal and ground.\n   * This preserves the DC path to ground for biasing.\n   * It provides a finite impedance at the source node, allowing $v_s \\neq 0$ so the input signal can modulate $v_{gs}$.\n2. With this modification, the mid-band voltage gain becomes:\n   $$A_v \\approx g_m (R_D \\parallel r_O) \\quad \\text{or} \\quad A_v \\approx \\frac{g_m R_D}{1 + (g_m + g_{mb})R_S}$$",
        "format": "markdown",
        "sha256": "c029701ba02ab8905b540e90fe0eb18bc9c8307c58cc2cb6f6b679c5dac1d937"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input cannot create a source signal and the ideal small-signal gain is zero. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 5318,
        "total_tokens": 6407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 5318,
        "total_tokens": 6407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit represents an **attempt to implement an AC-coupled Common-Gate (CG) NMOS amplifier**. \n\nBelow is a detailed analysis covering its DC operating conditions, small-signal behavior, a critical design flaw, and the standard method to correct it.\n\n---\n\n### 1. Circuit Identification and Roles of Components\n\n* **$M_1$ (NMOS Transistor):** Operates as the core amplifying device in a common-gate topology.\n* **$V_b$:** DC bias voltage applied to the gate to set the operating point.\n* **$R_D$:** Drain load resistor that converts the transistor's signal current into an output voltage.\n* **$C_1$:** Input coupling capacitor intended to block DC while passing the AC input signal $V_{\\text{in}}$.\n* **$V_{\\text{in}}$ and $V_{\\text{out}}$:** Small-signal input applied at the source and output taken from the drain, respectively.\n\n---\n\n### 2. DC (Biasing) Analysis\n\nAt DC, the coupling capacitor $C_1$ acts as an **open circuit**, completely isolating the input source $V_{\\text{in}}$ from the DC bias network.\n\n* **Source Voltage ($V_S$):** The source is tied directly to ground:\n  $$V_{S} = 0\\text{ V}$$\n* **Gate-to-Source Voltage ($V_{GS}$):** \n  $$V_{GS} = V_G - V_S = V_b - 0 = V_b$$\n* **Drain Current ($I_D$):** For $M_1$ to turn on and operate in the **saturation region**, the bias voltage must satisfy $V_b > V_{TH}$ (where $V_{TH}$ is the threshold voltage). Neglecting channel-length modulation ($\\lambda = 0$):\n  $$I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)(V_b - V_{TH})^2$$\n* **Output DC Voltage ($V_{\\text{out, DC}}$):**\n  $$V_{\\text{out, DC}} = V_{DD} - I_D R_D$$\n* **Condition for Saturation:** \n  $$V_{DS} \\ge V_{GS} - V_{TH} \\implies V_{DD} - I_D R_D \\ge V_b - V_{TH}$$\n\nFrom a purely DC standpoint, the transistor can be properly biased into saturation.\n\n---\n\n### 3. Small-Signal (AC) Analysis & The Critical Flaw\n\nDespite having a valid DC operating point, **this circuit fails completely as an amplifier.**\n\n#### Why the Circuit Fails:\n1. **Source Node is Grounded:** The source terminal of $M_1$ is connected directly to ground. In small-signal analysis, ground represents a signal short ($0\\text{ V}$).\n2. **Signal Shunting:** The input signal $V_{\\text{in}}$ drives the source node through capacitor $C_1$. However, because this node is hard-wired to ground:\n   $$v_s = 0$$\n   The entire input signal voltage is dropped across the capacitor $C_1$, shunting all AC input current directly to ground.\n3. **Zero Modulation:**\n   * The gate is held at an AC ground by the constant DC supply $V_b$ ($v_g = 0$).\n   * The source is held at AC ground ($v_s = 0$).\n   * Therefore, the small-signal gate-to-source voltage is identically zero:\n     $$v_{gs} = v_g - v_s = 0 - 0 = 0$$\n4. **Output Voltage and Gain:**\n   $$i_d = g_m v_{gs} = 0$$\n   $$v_{\\text{out}} = -i_d R_D = 0$$\n   $$\\mathbf{A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0}$$\n\n**Conclusion:** The circuit produces **no output signal**; the voltage gain is zero.\n\n---\n\n### 4. How to Fix the Circuit\n\nTo allow the AC input signal to develop a non-zero voltage at the source of $M_1$ while preserving DC biasing, the direct short to ground must be replaced with an element providing a **finite or high AC impedance**:\n\n#### Remedy: Insert a Source Resistor ($R_S$) or Current Source ($I_S$)\nConnect a resistor $R_S$ (or a bias current source) between the source of $M_1$ and ground:\n\n```\n           VDD\n            |\n            RD\n            |\n            +---- Vout\n            |\n          |/ M1\n  Vb -----|\n          |\\\n            |\n Vin --- C1-+\n            |\n            RS\n            |\n           GND\n```\n\nWith this modification:\n* **Input Impedance at the source:** $R_{\\text{in}} \\approx \\frac{1}{g_m} \\parallel R_S$\n* **Small-Signal Voltage Gain:** Assuming $C_1$ acts as an AC short at the frequency of interest:\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx g_m R_D$$ (non-inverting)",
        "format": "markdown",
        "sha256": "736892fd933380ed5a144ada0d149a977c26a87039dee9288517973caea12446"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input cannot modulate the transistor and the ideal voltage gain is zero. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 4835,
        "total_tokens": 5924,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3649,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 4835,
        "total_tokens": 5924,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3649,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic, here is a detailed analysis of the circuit's operation at DC and AC (small-signal), including its fundamental design limitation.\n\n---\n\n### 1. Circuit Overview\nThe circuit is intended to operate as a **Common-Gate (CG) amplifier**:\n* **$M_1$**: NMOS transistor.\n* **Gate**: Biased at a constant DC potential $V_b$ (AC ground).\n* **Drain**: Connected to the supply $V_{DD}$ via a load resistor $R_D$, where the output voltage $V_{\\text{out}}$ is sensed.\n* **Source**: Coupled to the input AC voltage source $V_{\\text{in}}$ through a DC-blocking capacitor $C_1$, but also **connected directly to ground**.\n\n---\n\n### 2. DC (Biasing) Analysis\nAt DC, capacitors act as open circuits ($C_1 \\rightarrow \\infty$ impedance):\n1. **Source Potential:** Because the source node is tied directly to ground:\n   $$V_{S,\\text{DC}} = 0\\text{ V}$$\n2. **Gate-to-Source Voltage:** \n   $$V_{GS} = V_b - V_{S,\\text{DC}} = V_b$$\n3. **Condition for Conduction:** \n   For $M_1$ to turn on, the bias voltage must satisfy:\n   $$V_b > V_{TH1}$$\n4. **Saturation Condition:** \n   Assuming $M_1$ operates in the saturation region:\n   $$I_D \\approx \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_b - V_{TH1})^2$$\n   The DC output voltage at the drain is:\n   $$V_{\\text{out,DC}} = V_{DD} - I_D R_D$$\n   For saturation, we require $V_{DS} \\ge V_{GS} - V_{TH1}$, which means:\n   $$V_{DD} - I_D R_D \\ge V_b - V_{TH1}$$\n\nFrom a DC standpoint, the direct ground connection properly fixes $V_S = 0\\text{ V}$ and establishes a stable bias current $I_D$.\n\n---\n\n### 3. AC (Small-Signal) Analysis & The Inherent Flaw\nIn a common-gate amplifier, amplification occurs because an input signal applied to the source modulates the gate-to-source voltage $v_{gs}$, which in turn modulates the drain current.\n\nHowever, in this circuit:\n1. **Source Node Voltage:** The source is connected directly to ground. Therefore, the small-signal (AC) potential at the source is rigidly held at zero:\n   $$v_s = 0$$\n2. **Gate Node Voltage:** The gate is connected to a fixed DC supply $V_b$, so:\n   $$v_g = 0$$\n3. **Small-Signal Gate-to-Source Voltage:**\n   $$v_{gs} = v_g - v_s = 0 - 0 = 0$$\n4. **Small-Signal Drain Current:**\n   $$i_d = g_m v_{gs} + g_{mb} v_{bs} = 0 \\quad (\\text{since } v_b = v_s = 0)$$\n5. **Small-Signal Output Voltage & Gain:**\n   $$v_{\\text{out}} = -i_d R_D = 0$$\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0$$\n\n#### Input Loading:\nThe input source $V_{\\text{in}}$ drives the capacitor $C_1$ directly into ground. It merely draws an AC current:\n$$i_{\\text{in}} = \\frac{v_{\\text{in}}}{1 / (s C_1)} = s C_1 v_{\\text{in}}$$\nNone of this signal current enters the transistor or affects the output node.\n\n---\n\n### 4. Summary & Correction\n* **Problem:** Grounding the source establishes DC bias but shorts the AC input signal directly to ground, resulting in a **voltage gain of zero ($A_v = 0$)**.\n* **Remedy:** To allow the source potential to vary with the input signal while preserving DC biasing, the direct ground connection must be replaced by a high AC impedance:\n  1. **Current-Source Biasing:** Place a DC current source ($I_{SS}$) between the source of $M_1$ and ground.\n  2. **Resistor Biasing:** Place a bias resistor ($R_S$) between the source of $M_1$ and ground. \n\nWith an impedance $R_S$ (or $r_o$ of a current source) at the source, the small-signal gain becomes the standard common-gate gain:\n$$A_v \\approx g_m R_D$$ (neglecting channel-length modulation and body effect).",
        "format": "markdown",
        "sha256": "a01ddd6b0988c24ebcbb60d710c6d9c08400cf86c3201d811fdc46ba0cbe9323"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source is hard-shorted to ground, so the input cannot create a small-signal source voltage and the ideal gain from Vin is zero. Minor details in the optional biasing discussion do not affect the essential answer.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 3561,
        "total_tokens": 4650,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 3561,
        "total_tokens": 4650,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\n---\n\n### **Detailed Explanation:**\n\n1. **Source Node and $C_{\\text{SB}}$:**\n   * The source terminal of $M_1$ is directly connected to ground.\n   * As shown in the schematic, both terminals of $C_{\\text{SB}}$ are connected to ground (the source is grounded, and the bulk/substrate is also at ground). Therefore, $C_{\\text{SB}}$ is shorted out and does not contribute any state variable or pole to the circuit.\n\n2. **Independent Nodes:**\n   * **Gate node:** Connected to the input through $R_S$, to ground via $C_{\\text{GS}}$, and to the drain via $C_{\\text{GD}}$.\n   * **Drain node ($V_{\\text{out}}$):** Connected to AC ground ($V_{DD}$) through $R_D$, to ground via $C_{\\text{DB}}$, and to the gate via $C_{\\text{GD}}$.\n\n3. **Transfer Function Order:**\n   * Writing the small-signal nodal equations at the gate and drain nodes results in a system of two first-order differential equations (or a second-degree polynomial in $s$ for the denominator of the transfer function $V_{\\text{out}}(s)/V_{\\text{in}}(s)$):\n     $$D(s) = 1 + b s + a s^2$$\n     where:\n     $$a = R_S R_D (C_{\\text{GS}} C_{\\text{GD}} + C_{\\text{GS}} C_{\\text{DB}} + C_{\\text{GD}} C_{\\text{DB}})$$\n   * Because the denominator is a second-order polynomial in $s$, the circuit has **two poles** (along with one right-half-plane zero given by $\\omega_z = +g_m / C_{\\text{GD}}$).",
        "format": "markdown",
        "sha256": "0eb8c819bea09c27520b40046de911c6b610ddf70b2466c9bc40bc4d8535782b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count by noting that CSB is shorted out and the remaining gate and drain dynamics give a second-order denominator.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 2767,
        "total_tokens": 3860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 2767,
        "total_tokens": 3860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\n### Explanation:\n\n1. **Role of $C_{\\text{SB}}$:**\n   - The source terminal of the transistor $M_1$ is connected directly to ground.\n   - The bulk (substrate) is also at ground.\n   - Consequently, both terminals of $C_{\\text{SB}}$ are tied to ground, which means $C_{\\text{SB}}$ is shorted out and carries no independent dynamic voltage. It has no effect on the circuit and contributes no poles.\n\n2. **Independent State Variables / Capacitive Loop:**\n   - The remaining active capacitors are $C_{\\text{GS}}$, $C_{\\text{GD}}$, and $C_{\\text{DB}}$.\n   - These three capacitors form a closed loop of capacitors:\n     - $C_{\\text{GS}}$ is between the gate and ground.\n     - $C_{\\text{DB}}$ is between the drain and ground.\n     - $C_{\\text{GD}}$ is between the gate and drain.\n   - Because of Kirchhoff's Voltage Law (KVL) around this capacitive loop ($V_{C_{\\text{GD}}} = V_{C_{\\text{GS}}} - V_{C_{\\text{DB}}}$), only **two** of the capacitor voltages can be independently chosen.\n   - Alternatively, there are only two non-reference nodes whose voltages can vary: the **gate node** and the **drain node ($V_{\\text{out}}$)**.\n\n3. **Transfer Function:**\n   - Performing small-signal nodal analysis at the gate and drain nodes results in a transfer function $H(s) = \\frac{V_{\\text{out}}(s)}{V_{\\text{in}}(s)}$ whose denominator is a **second-order polynomial in $s$**:\n     $$D(s) = 1 + s \\left[ (C_{\\text{GS}} + C_{\\text{GD}}) R_S + (C_{\\text{DB}} + C_{\\text{GD}}) R_D + g_m R_D R_S C_{\\text{GD}} \\right] + s^2 R_S R_D (C_{\\text{GS}} C_{\\text{GD}} + C_{\\text{GS}} C_{\\text{DB}} + C_{\\text{GD}} C_{\\text{DB}})$$\n   - A second-order denominator indicates exactly **2 poles** (along with 1 right-half-plane zero created by $C_{\\text{GD}}$).",
        "format": "markdown",
        "sha256": "1c1825f411d982bef5b455929f8b69b411aa6953288f62d2584b5661cd4d0ca3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count by noting that CSB is shorted to ground and the remaining capacitors have only two independent voltages. The second-order denominator is also consistent.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 2430,
        "total_tokens": 3523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1898,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 2430,
        "total_tokens": 3523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1898,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure has **2 poles** (and 1 right-half-plane zero).\n\n---\n\n### **Detailed Explanation:**\n\n1. **Role of $C_{\\text{SB}}$:**\n   * The source of transistor $M_1$ is directly connected to ground. \n   * Since the bulk (substrate) is also at ground, both terminals of $C_{\\text{SB}}$ are connected to ground. Therefore, $C_{\\text{SB}}$ is shorted out and has no effect on the circuit's frequency response.\n\n2. **Identifying Independent Dynamic Nodes:**\n   There are only two active nodes with capacitance in the signal path:\n   * **Gate node:** Connected to the input through $R_S$, to ground through $C_{\\text{GS}}$, and to the drain through $C_{\\text{GD}}$.\n   * **Drain node ($V_{\\text{out}}$):** Connected to AC ground through $R_D$, to ground through $C_{\\text{DB}}$, and to the gate through $C_{\\text{GD}}$.\n\n3. **Order of the Circuit:**\n   * The capacitors $C_{\\text{GS}}$, $C_{\\text{GD}}$, and $C_{\\text{DB}}$ form a capacitive $\\Pi$-network.\n   * There are no loops consisting purely of capacitors and independent voltage sources.\n   * The circuit has **2 independent state variables** (the gate voltage $v_g$ and drain voltage $v_d$).\n\nConsequently, the small-signal transfer function $\\frac{V_{\\text{out}}(s)}{V_{\\text{in}}(s)}$ has a second-order denominator ($s^2$ term), which yields **2 poles**.",
        "format": "markdown",
        "sha256": "d735e2802a537644d25afb1e1620ed4fa587c998a38ca1668ee44eb6827b2ba0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count by noting that CSB is shorted between grounded terminals and the remaining capacitors support two independent state variables.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 2036,
        "total_tokens": 3129,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1673,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 2036,
        "total_tokens": 3129,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1673,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Overview and Identification\n\n* **Transistor ($M_1$):** N-channel MOSFET operating in the saturation region.\n* **Input ($V_{\\text{in}}$):** Applied at the **source** of $M_1$.\n* **Output ($V_{\\text{out}}$):** Taken from the **drain** of $M_1$.\n* **Feedback Network ($R_1, R_2$):** A resistive voltage divider that samples the output voltage $V_{\\text{out}}$ and feeds back a voltage $V_F$ to the **gate** of $M_1$.\n\n---\n\n### 2. Feedback Topology and Polarity\n\n#### A. Polarity of Feedback\nTo determine whether the feedback is negative:\n1. Suppose $V_{\\text{in}}$ is held constant and the gate voltage $V_F$ increases ($\\Delta V_F > 0$).\n2. The gate-to-source voltage $V_{GS} = V_F - V_{\\text{in}}$ increases, increasing the drain current $I_D$.\n3. An increased $I_D$ pulls down the drain node voltage ($V_{\\text{out}}$ decreases).\n4. A decrease in $V_{\\text{out}}$ causes $V_F$ to decrease ($\\Delta V_F < 0$), opposing the initial disturbance.\n\nThus, the loop gain is negative, confirming that the circuit employs **negative feedback**.\n\n#### B. Feedback Classification\n* **Output Sampling (Shunt):** The feedback network samples the output **voltage** in parallel across $V_{\\text{out}}$.\n* **Input Mixing (Series):** The feedback voltage $V_F$ is applied to the gate, while the input $V_{\\text{in}}$ is applied to the source. The effective driving signal of the transistor is the difference:\n  $$V_{GS} = V_G - V_S = V_F - V_{\\text{in}}$$\n  Because voltages are subtracted across two terminals of a single port, this is **series mixing**.\n* **Topology:** **Voltage-Voltage (Series-Shunt)** feedback amplifier.\n\n---\n\n### 3. Small-Signal Analysis and Closed-Loop Gain\n\n#### A. Feedback Factor ($\\beta$)\nThe feedback network is a simple voltage divider from $V_{\\text{out}}$ to the gate of $M_1$ (since the gate draws zero DC/low-frequency current):\n$$\\beta = \\frac{V_F}{V_{\\text{out}}} = \\frac{R_2}{R_1 + R_2}$$\n\n#### B. Direct KCL Derivation (Neglecting $r_o$ and $g_{mb}$)\nAt the output node $V_{\\text{out}}$:\n* Small-signal gate voltage: $v_g = v_f = \\beta v_{\\text{out}}$\n* Small-signal source voltage: $v_s = v_{\\text{in}}$\n* Small-signal gate-source voltage: $v_{gs} = \\beta v_{\\text{out}} - v_{\\text{in}}$\n* Transistor small-signal current: $i_d = g_m v_{gs} = g_m (\\beta v_{\\text{out}} - v_{\\text{in}})$\n\nSumming the currents leaving the output node:\n$$\\frac{v_{\\text{out}}}{R_D} + \\frac{v_{\\text{out}}}{R_1 + R_2} + i_d = 0$$\n\nLet $R_L' = R_D \\parallel (R_1 + R_2)$:\n$$\\frac{v_{\\text{out}}}{R_L'} + g_m (\\beta v_{\\text{out}} - v_{\\text{in}}) = 0$$\n\n$$v_{\\text{out}} \\left( \\frac{1}{R_L'} + \\beta g_m \\right) = g_m v_{\\text{in}}$$\n\nSolving for the closed-loop voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{g_m R_L'}{1 + \\beta g_m R_L'}$$\n\n#### C. Loop Gain ($T$) and Ideal Gain\n* **Open-Loop Gain:** $A = g_m R_L' = g_m [R_D \\parallel (R_1 + R_2)]$\n* **Loop Gain:** \n  $$T = A\\beta = g_m [R_D \\parallel (R_1 + R_2)] \\left(\\frac{R_2}{R_1 + R_2}\\right)$$\n\nIf the loop gain is sufficiently large ($T \\gg 1$):\n$$A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}$$\n\n> **Key Insight:** Under strong negative feedback, the closed-loop gain is non-inverting and determined solely by the passive resistor ratio $1 + \\frac{R_1}{R_2}$, identical to a non-inverting op-amp configuration.\n\n---\n\n### 4. Input and Output Impedance\n\n#### A. Input Resistance ($R_{\\text{in}}$)\nLooking into the source terminal:\n* In a basic common-gate amplifier without feedback, the input resistance is low: $R_{\\text{in}} \\approx \\frac{1}{g_m}$.\n* With **series feedback** applied, as $V_{\\text{in}}$ increases, $V_{\\text{out}}$ and consequently $V_F$ (gate) also increase. The gate \"tracks\" the source, keeping $V_{GS}$ relatively constant, which significantly reduces the current drawn from the input source.\n\nUsing $i_{\\text{in}} = -i_d = g_m (v_{\\text{in}} - \\beta v_{\\text{out}})$:\n$$i_{\\text{in}} = g_m \\left( v_{\\text{in}} - \\frac{\\beta g_m R_L'}{1 + \\beta g_m R_L'} v_{\\text{in}} \\right) = \\frac{g_m}{1 + T} v_{\\text{in}}$$\n\n$$R_{\\text{in}} = \\frac{v_{\\text{in}}}{i_{\\text{in}}} = \\frac{1 + T}{g_m} = \\frac{1}{g_m} + \\beta R_L'$$\n\n> **Effect of Feedback:** Series feedback **increases** the input impedance by a factor of $(1 + T)$.\n\n#### B. Output Resistance ($R_{\\text{out}}$)\nTo find $R_{\\text{out}}$, ground the input ($v_{\\text{in}} = 0$) and apply a test voltage $v_x$ at $V_{\\text{out}}$:\n* The gate voltage is $v_g = \\beta v_x$.\n* With the source grounded, $v_{gs} = \\beta v_x$.\n* Current drawn by the transistor: $i_{d} = g_m v_{gs} = g_m \\beta v_x$.\n* Current through the passive resistors: $i_{\\text{passive}} = \\frac{v_x}{R_L'}$.\n\nTotal test current:\n$$i_x = i_d + i_{\\text{passive}} = v_x \\left( g_m \\beta + \\frac{1}{R_L'} \\right) = v_x \\frac{1 + T}{R_L'}$$\n\n$$R_{\\text{out}} = \\frac{v_x}{i_x} = \\frac{R_L'}{1 + T}$$\n\n> **Effect of Feedback:** Shunt feedback **decreases** the output impedance by a factor of $(1 + T)$.\n\n---\n\n### 5. Effect of Non-Idealities ($r_o$ and $g_{mb}$)\n\nIf channel-length modulation ($r_o$) and body effect ($g_{mb}$, assuming bulk is grounded) are included:\n* $v_{bs} = -v_{\\text{in}}$\n* The small-signal drain current becomes:\n  $$i_d = g_m(\\beta v_{\\text{out}} - v_{\\text{in}}) - g_{mb}v_{\\text{in}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_o}$$\n* The gain modifies to:\n  $$A_v = \\frac{g_m + g_{mb} + \\frac{1}{r_o}}{\\frac{1}{R_L'} + \\frac{1}{r_o} + \\beta g_m}$$\n  For large $g_m$, the term $\\beta g_m$ still dominates the denominator and $g_m$ dominates the numerator, preserving $A_v \\approx \\frac{1}{\\beta}$.\n\n---\n\n### Summary Table\n\n| Parameter | Without Feedback (Open-Loop Loaded) | With Negative Feedback (Closed-Loop) | Large Loop Gain Limit ($T \\gg 1$) |\n| :--- | :---: | :---: | :---: |\n| **Gain ($A_v$)** | $g_m [R_D \\parallel (R_1+R_2)]$ | $\\dfrac{g_m R_L'}{1 + \\beta g_m R_L'}$ | $1 + \\dfrac{R_1}{R_2}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\approx \\dfrac{1}{g_m}$ | $\\dfrac{1}{g_m}(1 + T)$ | High |\n| **Output Resistance ($R_{\\text{out}}$)** | $R_D \\parallel (R_1 + R_2)$ | $\\dfrac{R_L'}{1 + T}$ | Low |",
        "format": "markdown",
        "sha256": "452c47555aae05e497e869ceeae34669453898785b919749d13c4aa1d7a1fd2b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative-feedback polarity, and derives the correct closed-loop gain. The optional impedance and non-ideality discussion does not undermine the essential answer.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 8859,
        "total_tokens": 9948,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 8859,
        "total_tokens": 9948,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Overview and Topology\n\n* **Active Device:** NMOS transistor $M_1$.\n* **Input Port:** Applied at the **source** terminal ($V_{\\text{in}}$).\n* **Output Port:** Taken from the **drain** terminal ($V_{\\text{out}}$).\n* **Feedback Network:** A resistive voltage divider consisting of $R_1$ and $R_2$ samples the output voltage $V_{\\text{out}}$ and feeds back a voltage $V_F$ to the **gate** of $M_1$:\n  $$V_F = \\left( \\frac{R_2}{R_1 + R_2} \\right) V_{\\text{out}} = \\beta \\, V_{\\text{out}}$$\n  where $\\beta = \\frac{R_2}{R_1 + R_2}$ is the feedback factor.\n* **Basic Amplifier Configuration:** Because the input is applied at the source and the output is taken at the drain, the underlying stage is a **Common-Gate (CG)** amplifier with feedback to the gate.\n\n---\n\n### 2. Feedback Classification and Polarity\n\n1. **Feedback Type:**\n   * **Output Sampling:** **Voltage (Shunt)** sampling — the divider $R_1, R_2$ senses the voltage directly at the output node.\n   * **Input Mixing:** **Voltage (Series)** mixing — the input is applied at the source and the feedback is applied at the gate. The gate-to-source voltage is:\n     $$v_{gs} = v_g - v_s = v_F - v_{\\text{in}} = -(v_{\\text{in}} - v_F)$$\n     The feedback voltage and input voltage are subtracted directly across the gate-source port.\n   * **Classification:** **Series–Shunt (Voltage–Voltage)** feedback.\n\n2. **Loop Polarity (Negative Feedback Verification):**\n   * Suppose $V_F$ increases $\\rightarrow$ $V_{GS}$ increases $\\rightarrow$ drain current $I_D$ increases.\n   * A higher $I_D$ causes a larger voltage drop across $R_D$, which pulls $V_{\\text{out}}$ **down**.\n   * A decrease in $V_{\\text{out}}$ causes $V_F$ to decrease, counteracting the initial perturbation.\n   * Hence, the feedback loop provides **negative feedback**.\n\n---\n\n### 3. DC Bias and Saturation Condition\n\nFor $M_1$ to operate in the **saturation region**:\n$$V_{GS} > V_{TH} \\quad \\text{and} \\quad V_{DS} \\ge V_{GS} - V_{TH} \\implies V_D \\ge V_G - V_{TH}$$\n\nSince $V_G = V_F = \\frac{R_2}{R_1 + R_2} V_{\\text{out}} < V_{\\text{out}} = V_D$, the condition:\n$$V_D > V_G - V_{TH}$$\nis **always satisfied** as long as $V_{TH} > 0$ and the device is turned on ($V_{GS} > V_{TH}$). Therefore, $M_1$ is self-biased to remain in saturation.\n\n---\n\n### 4. Small-Signal Analysis (Assuming $\\lambda = 0$ and $\\gamma = 0$)\n\nLet:\n* $g_m$ be the transconductance of $M_1$.\n* $R_D' = R_D \\parallel (R_1 + R_2)$ be the total effective resistance seen at the drain node.\n* $\\beta = \\frac{R_2}{R_1 + R_2}$.\n\n#### A. Closed-Loop Voltage Gain ($A_v$)\n1. The small-signal gate and source voltages are:\n   $$v_g = v_F = \\beta v_{\\text{out}}$$\n   $$v_s = v_{\\text{in}}$$\n2. The small-signal drain current is:\n   $$i_d = g_m (v_g - v_s) = g_m (\\beta v_{\\text{out}} - v_{\\text{in}})$$\n3. Applying Kirchhoff’s Current Law (KCL) at the drain ($V_{\\text{out}}$) node:\n   $$\\frac{v_{\\text{out}}}{R_D} + \\frac{v_{\\text{out}}}{R_1 + R_2} + i_d = 0$$\n   $$\\frac{v_{\\text{out}}}{R_D'} + g_m(\\beta v_{\\text{out}} - v_{\\text{in}}) = 0$$\n   $$v_{\\text{out}} \\left( \\frac{1}{R_D'} + g_m \\beta \\right) = g_m v_{\\text{in}}$$\n\n4. Solving for the closed-loop gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n   $$A_v = \\frac{g_m R_D'}{1 + g_m \\beta R_D'}$$\n\n* **Open-loop gain:** $A = g_m R_D'$\n* **Loop gain:** $T = A \\beta = g_m \\beta R_D'$\n* **Ideal Closed-Loop Gain ($T \\gg 1$):**\n  If the loop gain $g_m \\beta R_D' \\gg 1$:\n  $$A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}$$\n  > *Remarkably, with sufficient loop gain, this circuit behaves like a standard non-inverting op-amp amplifier whose gain is set purely by the resistor ratio $(1 + R_1/R_2)$.*\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nThe input current $i_{\\text{in}}$ entering the source node is:\n$$i_{\\text{in}} = -i_d = g_m(v_{\\text{in}} - \\beta v_{\\text{out}})$$\n\nSubstitute $v_{\\text{out}} = A_v v_{\\text{in}}$:\n$$i_{\\text{in}} = g_m v_{\\text{in}} \\left(1 - \\frac{g_m \\beta R_D'}{1 + g_m \\beta R_D'}\\right) = \\frac{g_m v_{\\text{in}}}{1 + g_m \\beta R_D'}$$\n\nThus:\n$$R_{\\text{in}} = \\frac{v_{\\text{in}}}{i_{\\text{in}}} = \\frac{1 + g_m \\beta R_D'}{g_m} = \\frac{1}{g_m} + \\beta R_D'$$\n\n* In a standard common-gate amplifier, $R_{\\text{in}} \\approx \\frac{1}{g_m}$ (low).\n* Because of the **series feedback** at the input, the input impedance is **increased** by a factor of $(1 + T)$:\n  $$R_{\\text{in}} = R_{\\text{in, open}} (1 + T)$$\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nTo determine $R_{\\text{out}}$, deactivate the independent source ($v_{\\text{in}} = 0$) and apply a test voltage $v_x$ at the output:\n1. $v_s = 0$\n2. $v_g = \\beta v_x$\n3. $i_d = g_m (v_g - v_s) = g_m \\beta v_x$\n4. The test current $i_x$ is:\n   $$i_x = \\frac{v_x}{R_D'} + i_d = v_x \\left(\\frac{1}{R_D'} + g_m \\beta\\right)$$\n\nTherefore:\n$$R_{\\text{out}} = \\frac{v_x}{i_x} = \\frac{R_D'}{1 + g_m \\beta R_D'} = \\frac{R_D'}{1 + T}$$\n\n* Because of the **shunt feedback** at the output, the output impedance is **decreased** by a factor of $(1 + T)$.\n\n---\n\n### 5. Second-Order Effects: Channel-Length Modulation ($r_O$) and Body Effect ($g_{mb}$)\n\nIf $r_O < \\infty$ and body effect is present ($g_{mb} = \\eta g_m$, with substrate grounded so $v_{bs} = -v_{\\text{in}}$):\n\n1. **Voltage Gain:**\n   $$A_v = \\frac{\\left[(g_m + g_{mb}) r_O + 1\\right] R_D'}{r_O + R_D' + g_m \\beta r_O R_D'}$$\n\n2. **Output Impedance:**\n   $$R_{\\text{out}} = \\frac{R_D' \\parallel r_O}{1 + g_m \\beta (R_D' \\parallel r_O)}$$\n\n3. **Input Impedance:**\n   $$R_{\\text{in}} = \\frac{r_O + R_D' + g_m \\beta r_O R_D'}{1 + (g_m + g_{mb}) r_O}$$\n\n---\n\n### 6. Summary of Characteristics\n\n| Parameter | Without Feedback ($\\beta = 0$) | With Feedback ($\\beta = \\frac{R_2}{R_1+R_2}$) | Ideal Limit ($T \\gg 1$) |\n| :--- | :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $g_m R_D'$ | $\\dfrac{g_m R_D'}{1 + g_m \\beta R_D'}$ | $1 + \\dfrac{R_1}{R_2}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\dfrac{1}{g_m}$ | $\\dfrac{1}{g_m}(1 + T)$ *(increased)* | $\\beta R_D'$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $R_D'$ | $\\dfrac{R_D'}{1 + T}$ *(decreased)* | $\\dfrac{1}{g_m \\beta}$ |\n| **Gain Desensitivity** | Poor (depends on $g_m$) | High (stabilized by feedback) | Independent of transistor parameters |",
        "format": "markdown",
        "sha256": "9c30f5a819042a901555af73552d4e309a32bf49fbc352500e091d99e88a47a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain. This meets the full-credit rule.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 10190,
        "total_tokens": 11279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7830,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 10190,
        "total_tokens": 11279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7830,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Overview and Identification\n\nThe circuit consists of:\n* **$M_1$**: An NMOS transistor acting as the core active gain element.\n* **$R_D$**: The drain load resistor connected to the positive supply $V_{DD}$.\n* **$R_1$ and $R_2$**: A resistive voltage divider that samples the output voltage $V_{\\text{out}}$ and feeds back a fraction $V_F$ to the gate of $M_1$.\n* **Input ($V_{\\text{in}}$)**: Applied directly to the **source** of $M_1$.\n* **Output ($V_{\\text{out}}$)**: Taken from the **drain** of $M_1$.\n\nBecause the input is applied at the source and the output is at the drain, the core amplifier behaves like a **common-gate** stage, making the circuit a **non-inverting amplifier with negative feedback**.\n\n---\n\n### 2. Feedback Analysis\n\n#### A. Feedback Topology\n1. **Output Sensing (Sampling):** \n   * The voltage divider $R_1 - R_2$ is connected in parallel with the output node ($V_{\\text{out}}$). It senses the output **voltage** (**shunt sensing**).\n2. **Input Mixing (Comparison):**\n   * The input signal $V_{\\text{in}}$ is applied to the source, while the feedback signal $V_F$ is applied to the gate.\n   * The effective control voltage of the transistor is:\n     $$V_{GS} = V_G - V_S = V_F - V_{\\text{in}}$$\n   * Because the two voltages are subtracted across two terminals, this is a **series mixing** (voltage comparison).\n\nTherefore, this circuit employs a **voltage-voltage (series-shunt)** negative feedback topology.\n\n#### B. Feedback Factor ($\\beta$)\nThe voltage divider samples $V_{\\text{out}}$ to produce:\n$$\\beta = \\frac{V_F}{V_{\\text{out}}} = \\frac{R_2}{R_1 + R_2}$$\n\n#### C. Verification of Negative Feedback\n* If $V_{\\text{out}}$ increases ($\\uparrow$):\n  $$\\implies V_F \\uparrow \\implies V_{GS} = (V_F - V_{\\text{in}}) \\uparrow \\implies I_D \\uparrow$$\n* An increase in drain current $I_D$ pulls down the drain node:\n  $$V_{\\text{out}} = V_{DD} - I_D R_D \\downarrow$$\n* Since an increase in $V_{\\text{out}}$ produces an opposing change that decreases $V_{\\text{out}}$, the feedback is **negative**.\n\n---\n\n### 3. Small-Signal Closed-Loop Gain ($A_v$)\n\nAssume first that channel-length modulation ($\\lambda = 0$) and body effect ($\\gamma = 0$) are negligible.\n\n#### Direct Derivation:\n* The small-signal gate-to-source voltage is:\n  $$v_{gs} = v_g - v_s = \\beta v_{\\text{out}} - v_{\\text{in}}$$\n* The small-signal drain current is:\n  $$i_d = g_m v_{gs} = g_m (\\beta v_{\\text{out}} - v_{\\text{in}})$$\n* Defining the total load resistance at the drain node as:\n  $$R_L' = R_D \\parallel (R_1 + R_2) = \\frac{R_D(R_1 + R_2)}{R_D + R_1 + R_2}$$\n* Applying Kirchhoff's Current Law (KCL) at the output node $V_{\\text{out}}$:\n  $$\\frac{v_{\\text{out}}}{R_L'} + i_d = 0$$\n  $$\\frac{v_{\\text{out}}}{R_L'} + g_m (\\beta v_{\\text{out}} - v_{\\text{in}}) = 0$$\n  $$v_{\\text{out}} \\left( \\frac{1}{R_L'} + g_m \\beta \\right) = g_m v_{\\text{in}}$$\n\nSolving for the closed-loop voltage gain $A_v$:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_L'}{1 + g_m \\beta R_L'} = \\frac{g_m [R_D \\parallel (R_1 + R_2)]}{1 + g_m \\left(\\frac{R_2}{R_1 + R_2}\\right) [R_D \\parallel (R_1 + R_2)]}$$\n\n#### Ideal High-Loop-Gain Case:\nIf the loop gain $T = g_m \\beta R_L' \\gg 1$:\n$$A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}$$\n\n> **Insight:** Under high loop gain, the gain is entirely set by the resistor ratio $(1 + R_1/R_2)$, exactly analogous to a standard non-inverting op-amp configuration.\n\n---\n\n### 4. Input and Output Impedance\n\n#### A. Input Impedance ($R_{\\text{in}}$)\nLooking into the source terminal ($V_{\\text{in}}$):\n* The small-signal current drawn from the input source is $i_{\\text{in}} = -i_d$:\n  $$i_{\\text{in}} = g_m (v_{\\text{in}} - \\beta v_{\\text{out}})$$\n* Substituting $v_{\\text{out}} = \\frac{g_m R_L'}{1 + g_m \\beta R_L'} v_{\\text{in}}$:\n  $$i_{\\text{in}} = g_m v_{\\text{in}} \\left( 1 - \\frac{g_m \\beta R_L'}{1 + g_m \\beta R_L'} \\right) = \\frac{g_m v_{\\text{in}}}{1 + g_m \\beta R_L'}$$\n* Therefore:\n  $$R_{\\text{in}} = \\frac{v_{\\text{in}}}{i_{\\text{in}}} = \\frac{1}{g_m} (1 + g_m \\beta R_L') = \\frac{1}{g_m} + \\beta R_L'$$\n\n> **Note:** Because the feedback is applied in **series** at the input, the input impedance is increased by a factor of $(1 + T)$ compared to an open-loop common-gate stage ($1/g_m$).\n\n#### B. Output Impedance ($R_{\\text{out}}$)\nTo find $R_{\\text{out}}$, deactivate the input ($v_{\\text{in}} = 0$) and apply a test source $v_x$ at the output:\n* With $v_s = 0$, $v_{gs} = v_g = \\beta v_x$.\n* The current into the drain is $i_d = g_m \\beta v_x$.\n* Applying KCL at the output node:\n  $$i_x = \\frac{v_x}{R_D} + \\frac{v_x}{R_1 + R_2} + g_m \\beta v_x = v_x \\left( \\frac{1}{R_L'} + g_m \\beta \\right)$$\n* Therefore:\n  $$R_{\\text{out}} = \\frac{v_x}{i_x} = \\frac{R_L'}{1 + g_m \\beta R_L'} = \\frac{R_L'}{1 + T}$$\n\n> **Note:** Because the feedback is **shunt** at the output, the open-loop output impedance $R_L'$ is reduced by the factor $(1 + T)$.\n\n---\n\n### 5. Practical Non-Idealities\n\n1. **Finite Output Resistance ($r_O$):**\n   When including channel-length modulation ($r_O$), the gain expression becomes:\n   $$A_v = \\frac{(g_m + g_o) R_L'}{1 + g_o R_L' + g_m \\beta R_L'} \\quad \\text{where } g_o = \\frac{1}{r_O}$$\n\n2. **Body Effect:**\n   Since the bulk (substrate) is typically tied to ground while the source is at $V_{\\text{in}}$, the source-to-bulk voltage is modulated ($v_{bs} = -v_{\\text{in}}$). \n   * This adds a body-effect current component: $g_{mb} v_{bs} = -g_{mb} v_{\\text{in}}$.\n   * The effective open-loop transconductance from the input is increased to $(g_m + g_{mb})$, which slightly increases the gain:\n     $$A_v \\approx \\left(1 + \\frac{g_{mb}}{g_m}\\right) \\left(1 + \\frac{R_1}{R_2}\\right) \\quad (\\text{for } T \\gg 1)$$",
        "format": "markdown",
        "sha256": "07b332cc13f608324c4cd9a24d3c15d0b4e9a224676b7aeea7a715ba5adaee47"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback; the derived closed-loop gain also matches the golden solution. Extra impedance and nonideality discussion is not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 7640,
        "total_tokens": 8729,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5590,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 7640,
        "total_tokens": 8729,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5590,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Common-Drain (CD) Amplifier**, commonly referred to as an **NMOS Source Follower** with an **active NMOS current-source load**.\n\n---\n\n### 1. Circuit Description and Roles of Components\n\n* **$M_1$ (Input / Driver Transistor):** \n  * Configured in a common-drain configuration (the drain is tied to the AC ground, $V_{DD}$).\n  * The input voltage $V_{\\text{in}}$ is applied to the gate, and the output $V_{\\text{out}}$ is taken from the source.\n* **$M_2$ (Current-Source Load):** \n  * Biased by a constant DC gate voltage $V_b$.\n  * Acts as an active current sink, establishing a stable DC bias current $I_{\\text{bias}}$ through $M_1$.\n\n---\n\n### 2. Large-Signal (DC) Operation\n\nAssuming both transistors operate in the **saturation region**:\n\n1. **Bias Current:**\n   The current provided by $M_2$ (neglecting channel-length modulation) is:\n   $$I_D \\approx \\frac{1}{2} \\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2$$\n\n2. **Output Voltage ($V_{\\text{out}}$):**\n   Since the current flowing through $M_1$ equals the current through $M_2$:\n   $$I_{D1} = \\frac{1}{2} \\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_1 (V_{GS1} - V_{TH1})^2 = I_D$$\n   \n   Solving for the gate-to-source voltage $V_{GS1}$:\n   $$V_{GS1} = V_{TH1} + \\sqrt{\\frac{2 I_D}{\\mu_n C_{\\text{ox}} (W/L)_1}} = V_{TH1} + V_{ov1}$$\n\n   The output voltage is:\n   $$V_{\\text{out}} = V_{\\text{in}} - V_{GS1} = V_{\\text{in}} - V_{TH1} - V_{ov1}$$\n\n   > **Note on Body Effect:** In standard bulk CMOS processes, the substrate of $M_1$ is connected to ground ($V_B = 0$). Thus, the source-to-bulk voltage is $V_{SB1} = V_{\\text{out}} > 0$. This causes the threshold voltage $V_{TH1}$ to vary with $V_{\\text{out}}$:\n   > $$V_{TH1} = V_{TH0} + \\gamma \\left(\\sqrt{2\\Phi_F + V_{\\text{out}}} - \\sqrt{2\\Phi_F}\\right)$$\n   > This introduces non-linearity into the transfer characteristic.\n\n3. **Output Voltage Swing:**\n   * **Minimum Output Voltage ($V_{\\text{out,min}}$):** To keep $M_2$ in saturation:\n     $$V_{\\text{out}} \\ge V_{DS2,\\text{sat}} = V_b - V_{TH2}$$\n   * **Maximum Output Voltage ($V_{\\text{out,max}}$):** To keep $M_1$ in saturation:\n     $$V_{DG1} \\ge -V_{TH1} \\implies V_{\\text{out}} \\le V_{DD} - V_{ov1}$$\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\nLet:\n* $g_{m1}, g_{m2}$: Transconductance of $M_1$ and $M_2$.\n* $g_{mb1}$: Body-effect transconductance of $M_1$ ($g_{mb1} = \\eta g_{m1}$).\n* $r_{o1}, r_{o2}$: Output resistances due to channel-length modulation.\n\n#### A. Voltage Gain ($A_v$)\nApplying Kirchhoff's Current Law (KCL) at the output node:\n$$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1} v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1}} - \\frac{v_{\\text{out}}}{r_{o2}} = 0$$\n\nSolving for the voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} = \\frac{g_{m1}}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}}$$\n\n* **Ideal Case ($r_{o1}, r_{o2} \\to \\infty$ and neglecting body effect, $g_{mb1} = 0$):**\n  $$A_v \\approx 1$$\n* **Practical Case (accounting for body effect):**\n  $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta} < 1 \\quad (\\text{typically } 0.7 \\sim 0.9)$$\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking directly into the gate of $M_1$:\n$$R_{\\text{in}} \\approx \\infty \\quad (\\text{at low frequencies})$$\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nSetting the input $v_{\\text{in}} = 0$ and looking into the output node:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\nSince $g_{m1}$ is relatively large, the output resistance is **low**.\n\n---\n\n### 4. Summary of Key Characteristics\n\n| Parameter | Value / Characteristic |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | Positive, slightly less than unity ($A_v \\approx 0.7 - 0.9$) |\n| **Input Impedance ($R_{\\text{in}}$)** | Very High |\n| **Output Impedance ($R_{\\text{out}}$)** | Low ($\\approx 1/g_{m1}$) |\n| **Phase Shift** | $0^\\circ$ (non-inverting) |\n| **Primary Use Cases** | Voltage buffer, impedance matching (high-to-low), DC level shifter |",
        "format": "markdown",
        "sha256": "036be91c028662810a62c7933483b2d63251784280a2611152bf89b7a6d7e28c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current-source load, and gives a positive gain slightly below unity. Its small-signal gain and low-output-resistance results match the golden solution; the full-credit rule applies.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3565,
        "total_tokens": 4676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2053,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3565,
        "total_tokens": 4676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2053,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Common-Drain Amplifier**, commonly referred to as a **Source Follower**, with an active **NMOS current-source load**.\n\n---\n\n### 1. Circuit Description and Component Roles\n\n* **$M_1$ (Input / Drive Transistor):** \n  * Configured as a source follower.\n  * The input signal $V_{\\text{in}}$ is applied to its gate, the drain is connected to $V_{DD}$ (an AC ground), and the output $V_{\\text{out}}$ is taken from its source.\n* **$M_2$ (Current-Source Load):**\n  * Biased at its gate by a fixed DC voltage $V_b$.\n  * It acts as a current sink, establishing a constant bias current $I_{D}$ for the stage.\n\n---\n\n### 2. Large-Signal (DC) Behavior\n\n#### **Bias Current & DC Output Voltage**\nAssuming both transistors are biased in the **saturation region**:\n1. The current drawn by $M_2$ is:\n   $$I_{D} \\approx \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2$$\n\n2. Since $I_{D1} = I_{D2} = I_D$, the overdrive voltage of $M_1$ is fixed by this current:\n   $$V_{GS1} = V_{TH1} + \\sqrt{\\frac{2 I_D}{\\mu_n C_{ox} (W/L)_1}}$$\n\n3. The DC output voltage follows the input voltage shifted downward by $V_{GS1}$:\n   $$V_{\\text{out}} = V_{\\text{in}} - V_{GS1}$$\n\n#### **Body Effect**\nIn a standard n-channel process, the bulk of $M_1$ is connected to the lowest supply (Ground). Thus, the source-to-bulk voltage is $V_{SB1} = V_{\\text{out}} > 0$. \n* This causes the threshold voltage $V_{TH1}$ to vary with the output voltage:\n  $$V_{TH1} = V_{TH0} + \\gamma \\left( \\sqrt{2\\phi_F + V_{\\text{out}}} - \\sqrt{2\\phi_F} \\right)$$\n* As $V_{\\text{in}}$ (and therefore $V_{\\text{out}}$) increases, $V_{TH1}$ increases, making the level shift non-constant and introducing **harmonic distortion/non-linearity**.\n\n#### **Output Swing Limits**\nFor proper operation, both transistors must remain in saturation:\n* **Minimum output voltage ($V_{\\text{out,min}}$):** Set by the overdrive voltage of $M_2$:\n  $$V_{\\text{out,min}} = V_{DS,\\text{sat}2} = V_b - V_{TH2}$$\n* **Maximum output voltage ($V_{\\text{out,max}}$):** For $M_1$ to stay in saturation:\n  $$V_{\\text{out,max}} \\le V_{DD} - (V_{GS1} - V_{TH1})$$\n\n---\n\n### 3. Small-Signal Analysis\n\nLet:\n* $g_{m1}, g_{m2}$: transconductances of $M_1$ and $M_2$\n* $g_{mb1}$: body-effect transconductance of $M_1$ ($\\approx \\eta g_{m1}$, where $\\eta \\approx 0.1 - 0.3$)\n* $r_{O1}, r_{O2}$: channel-length modulation output resistances of $M_1$ and $M_2$\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\nApplying KCL at the output node $v_{\\text{out}}$:\n$$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1} v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{O1}} - \\frac{v_{\\text{out}}}{r_{O2}} = 0$$\n\nSolving for $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{O1}} + \\frac{1}{r_{O2}}} = \\frac{g_{m1}}{g_{m1} + g_{mb1} + g_{O1} + g_{O2}}$$\n\n* **Ideal Case ($r_O \\to \\infty$ and no body effect):** $A_v \\approx 1$.\n* **Practical Case:** Because of the body effect ($g_{mb1}$) and finite $r_O$, the gain is strictly less than 1, typically around **$0.7$ to $0.85$**:\n  $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta} < 1$$\n\n---\n\n#### **B. Output Resistance ($R_{\\text{out}}$)**\nLooking into the $V_{\\text{out}}$ node:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{O1} \\parallel r_{O2} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\nBecause transconductances ($g_m$) are relatively large, $R_{\\text{out}}$ is **low**, typically ranging from tens to a few hundred ohms.\n\n---\n\n#### **C. Input Resistance ($R_{\\text{in}}$)**\nLooking into the gate of $M_1$:\n$$R_{\\text{in}} \\to \\infty \\quad \\text{(at low frequencies)}$$\n\n---\n\n### 4. Summary of Characteristics and Applications\n\n| Parameter | Value / Property |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\approx 1$ (typically $0.7 - 0.85$) |\n| **Input Impedance ($R_{\\text{in}}$)** | Very High |\n| **Output Impedance ($R_{\\text{out}}$)** | Low ($\\approx 1/g_{m1}$) |\n| **Phase Shift** | $0^\\circ$ (non-inverting) |\n\n* **Main Application:** Serves as a **voltage buffer** to drive low-impedance or heavy capacitive loads without loading the preceding high-gain stage.\n* **Key Limitations:** \n  * Gain is always $< 1$.\n  * Significant non-linearity due to the substrate body effect.\n  * Consumes DC headroom ($V_{\\text{out}}$ is reduced by $V_{GS1}$).",
        "format": "markdown",
        "sha256": "8194c33721569dc1c5de3ad117c026dca099826f5fb9117b7b1773cfb5f7f4d5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as an NMOS current-source load, and gives a positive gain below unity with body effect and finite output resistances included. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3856,
        "total_tokens": 4967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3856,
        "total_tokens": 4967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure:\n\n---\n\n### 1. Circuit Identification and Overview\n* **Topology:** **Common-Drain (CD) Amplifier**, commonly referred to as a **Source Follower**.\n* **Key Components:**\n  * **$M_1$ (Input Driver):** NMOS transistor operating in common-drain configuration, receiving the input signal $V_{\\text{in}}$ at its gate and delivering the output from its source.\n  * **$M_2$ (Current-Source Load):** NMOS transistor biased by a constant gate voltage $V_b$, functioning as an active current-source load to provide a high dynamic load resistance.\n* **Primary Role:** Functions as a **voltage buffer** with high input impedance, low output impedance, and a voltage gain close to (but slightly less than) unity.\n\n---\n\n### 2. Large-Signal (DC) Operation and Signal Swings\n\n1. **Bias Current:**\n   Assuming $M_2$ is in saturation, the DC drain current is set by $V_b$:\n   $$I_D \\approx \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2$$\n\n2. **DC Output Voltage:**\n   The output voltage sits one gate-to-source voltage below the input:\n   $$V_{\\text{out}} = V_{\\text{in}} - V_{GS1}$$\n   Because of this $V_{GS1}$ offset, the circuit also functions as a **DC level shifter**.\n\n3. **Output Voltage Swing Limits:**\n   * **Minimum Output Voltage ($V_{\\text{out,min}}$):** \n     To keep $M_2$ saturated (acting as a proper current source):\n     $$V_{\\text{out,min}} = V_{DS,\\text{sat2}} = V_b - V_{TH2}$$\n   * **Maximum Output Voltage ($V_{\\text{out,max}}$):** \n     To keep $M_1$ in the saturation region:\n     $$V_{DD} - V_{\\text{out}} \\ge V_{\\text{in}} - V_{\\text{out}} - V_{TH1} \\implies V_{\\text{in,max}} \\le V_{DD} + V_{TH1}$$\n     If $V_{\\text{in}}$ swings too close to $V_{DD}$, $M_1$ enters the triode region:\n     $$V_{\\text{out,max}} \\approx V_{DD} - (V_{GS1} - V_{TH1})$$\n\n---\n\n### 3. Small-Signal Analysis\n\nLet:\n* $g_{m1}, g_{mb1}$: Transconductance and body-effect transconductance of $M_1$\n* $r_{o1}, r_{o2}$: Output resistances (channel-length modulation) of $M_1$ and $M_2$\n\n#### A. Small-Signal Voltage Gain ($A_v$)\nApplying Kirchhoff's Current Law (KCL) at the output node $V_{\\text{out}}$:\n$$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1} v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1}} - \\frac{v_{\\text{out}}}{r_{o2}} = 0$$\n\nSolving for $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} = \\frac{g_{m1}}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}}$$\n\n* **Neglecting channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$):**\n  $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta} < 1 \\quad \\left(\\text{where } \\eta = \\frac{g_{mb1}}{g_{m1}} \\approx 0.1 \\sim 0.3\\right)$$\n  Typically, $A_v \\approx 0.7 \\text{ to } 0.9$.\n\n* **Neglecting body effect ($g_{mb1} \\approx 0$) and channel-length modulation:**\n  $$A_v \\approx 1$$\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the gate of $M_1$ at low frequencies:\n$$R_{\\text{in}} \\to \\infty$$\n*(In practice, it is purely capacitive due to gate capacitances $C_{gs}$ and $C_{gd}$.)*\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nSetting the input $v_{\\text{in}} = 0$ and applying a test voltage $v_x$ at the output:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}} = \\left(\\frac{1}{g_{m1} + g_{mb1}}\\right) \\parallel r_{o1} \\parallel r_{o2}$$\n\nSince $g_{m1} \\gg g_{o1}, g_{o2}$:\n$$R_{\\text{out}} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\nThis provides a **low output impedance**, making it well-suited to drive heavy capacitive loads or low-resistance stages without significant signal attenuation.\n\n---\n\n### 4. Key Non-Idealities\n1. **Body Effect and Non-Linearity:** \n   In typical standard CMOS processes, the bulk of all NMOS transistors is tied to ground ($V_B = 0$). As $V_{\\text{out}}$ varies, the source-to-bulk voltage $V_{SB1} = V_{\\text{out}}$ changes, causing the threshold voltage $V_{TH1}$ to modulate:\n   $$V_{TH1} = V_{TH0} + \\gamma \\left( \\sqrt{2\\phi_F + V_{\\text{out}}} - \\sqrt{2\\phi_F} \\right)$$\n   This variation causes gain non-linearity and harmonic distortion.\n2. **Voltage Headroom Penalty:**\n   The output is restricted to $V_{\\text{out}} \\in [V_{DS,\\text{sat2}}, \\, V_{DD} - V_{ov1}]$, which limits dynamic range in low-voltage supply technologies.\n\n---\n\n### 5. Summary Table\n\n| Parameter | Expression / Value | Notes |\n| :--- | :--- | :--- |\n| **Circuit Type** | Common-Drain (Source Follower) | Voltage Buffer |\n| **Voltage Gain ($A_v$)** | $\\dfrac{g_{m1}}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}} < 1$ | In-phase (positive gain) |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ (at DC) | Purely capacitive at AC |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\approx \\dfrac{1}{g_{m1} + g_{mb1}}$ | Low impedance |\n| **Bandwidth** | Very High | No Miller effect on $C_{gs}$ |",
        "format": "markdown",
        "sha256": "d879648a5147183ab2a648bf5f47d9c8edead1ab21e7e3a8247d49b1784da073"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as its current-source load, and gives the positive, slightly sub-unity gain with body effect and finite output resistances. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3098,
        "total_tokens": 4209,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1403,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3098,
        "total_tokens": 4209,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1403,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is the classic **CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**. It consists of:\n* **$M_1$**: An **n-channel MOSFET (NMOS)** serving as the pull-down network, with its source connected to ground.\n* **$M_2$**: A **p-channel MOSFET (PMOS)** serving as the pull-up network, with its source connected to $V_{DD}$.\n* The **gates** of both transistors are tied together to form the input terminal ($V_{\\text{in}}$).\n* The **drains** of both transistors are tied together to form the output terminal ($V_{\\text{out}}$).\n\nThis fundamental topology can be analyzed from two primary perspectives: **digital operation** (logic inverter) and **analog operation** (inverter-based small-signal amplifier).\n\n---\n\n### 1. Digital Operation (Static Characteristics & VTC)\n\nAs $V_{\\text{in}}$ sweeps from $0$ to $V_{DD}$, the circuit traverses five distinct operating regions along its **Voltage Transfer Characteristic (VTC)**:\n\n| Region | Input Range ($V_{\\text{in}}$) | $M_1$ (NMOS) State | $M_2$ (PMOS) State | Output Voltage ($V_{\\text{out}}$) |\n|:---:|:---|:---:|:---:|:---:|\n| **I** | $0 \\le V_{\\text{in}} < V_{TH1}$ | **Cutoff** ($I_{D1} = 0$) | **Triode / Linear** | $V_{\\text{out}} = V_{DD}$ (Logic HIGH) |\n| **II** | $V_{TH1} \\le V_{\\text{in}} < V_M$ | **Saturation** | **Triode** | High, but starts dropping |\n| **III** | $V_{\\text{in}} \\approx V_M$ (Transition) | **Saturation** | **Saturation** | Steep drop; high gain region |\n| **IV** | $V_M < V_{\\text{in}} \\le V_{DD} - \\lvert V_{TH2} \\rvert$ | **Triode** | **Saturation** | Low, continuing to drop |\n| **V** | $V_{\\text{in}} > V_{DD} - \\lvert V_{TH2} \\rvert$ | **Triode** | **Cutoff** ($I_{D2} = 0$) | $V_{\\text{out}} = 0\\text{ V}$ (Logic LOW) |\n\n#### Switching Threshold ($V_M$)\nThe switching threshold (or trip point) $V_M$ is defined where $V_{\\text{in}} = V_{\\text{out}}$. At this point, both transistors are in saturation:\n\n$$I_{D1} = \\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_M - V_{TH1})^2$$\n$$I_{D2} = \\frac{1}{2}\\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_M - \\lvert V_{TH2} \\rvert)^2$$\n\nEquating the currents yields:\n$$V_M = \\frac{V_{TH1} + \\sqrt{\\frac{k_p}{k_n}} (V_{DD} - \\lvert V_{TH2} \\rvert)}{1 + \\sqrt{\\frac{k_p}{k_n}}}$$\n\nwhere $k_n = \\mu_n C_{ox} (W/L)_1$ and $k_p = \\mu_p C_{ox} (W/L)_2$. \n* For a **symmetric inverter** ($V_M = V_{DD}/2$) with symmetric thresholds ($V_{TH1} = \\lvert V_{TH2} \\rvert$), the device sizing requires:\n  $$\\left(\\frac{W}{L}\\right)_2 \\approx \\frac{\\mu_n}{\\mu_p} \\left(\\frac{W}{L}\\right)_1 \\approx (2 \\sim 3) \\left(\\frac{W}{L}\\right)_1$$\n\n#### Power Dissipation:\n* **Static Power:** Virtually zero in steady-state (excluding subthreshold leakage), because in both logic states, one of the transistors is completely turned off.\n* **Dynamic Power:** Occurs during switching due to capacitive charging/discharging and short-circuit current:\n  $$P_{\\text{dynamic}} \\approx C_L V_{DD}^2 f$$\n\n---\n\n### 2. Analog Operation (Inverter as an Amplifier)\n\nWhen biased in **Region III** (typically via a large feedback resistor between output and input so that $V_{\\text{in}} = V_{\\text{out}} = V_M$), both devices operate in saturation, turning the inverter into a high-efficiency **push-pull transconductance amplifier**.\n\n#### Small-Signal Equivalent Model:\n1. **Effective Transconductance ($G_m$):**\n   Both transistors convert the input voltage into output current in phase:\n   * $M_1$ contributes: $i_{d1} = g_{m1} v_{\\text{in}}$\n   * $M_2$ contributes: $i_{d2} = -g_{m2} v_{sg2} = g_{m2} v_{\\text{in}}$ (pulling into the output node)\n   \n   $$G_m = g_{m1} + g_{m2}$$\n\n2. **Output Resistance ($R_{\\text{out}}$):**\n   Looking into the output node, the drain resistances of both transistors appear in parallel:\n   $$R_{\\text{out}} = r_{o1} \\parallel r_{o2} = \\frac{1}{\\lambda_1 I_D + \\lambda_2 I_D}$$\n\n3. **Small-Signal Voltage Gain ($A_v$):**\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -G_m R_{\\text{out}} = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$$\n\n---\n\n### 3. Key Analog Advantages & Trade-offs\n\n* **Current Reuse (High Power Efficiency):** \n  Unlike a standard single-transistor common-source amplifier, both transistors share the exact same bias current $I_D$, yet their transconductances sum together ($g_{m1} + g_{m2}$). This effectively doubles the transconductance-to-current ratio ($g_m / I_D$), making it extremely power-efficient.\n* **Large Output Swing:** \n  The output can swing nearly rail-to-rail:\n  $$V_{ov1} \\le V_{\\text{out}} \\le V_{DD} - |V_{ov2}|$$\n* **Reduced Input-Referred Noise:**\n  The input-referred thermal noise spectral density is:\n  $$\\overline{v_{n,\\text{in}}^2} \\approx \\frac{4kT\\gamma}{g_{m1} + g_{m2}}$$\n  which is lower than that of a single-transistor stage.\n* **Bandwidth & Miller Effect:**\n  Because the total gate-to-drain capacitance $C_{gd} = C_{gd1} + C_{gd2}$ bridges input and output, the Miller effect multiplies this capacitance by $(1 + |A_v|)$, significantly increasing input capacitance and limiting high-frequency bandwidth.",
        "format": "markdown",
        "sha256": "83bdf6d72901bd4aebf4d6b0fd3f953279e6d890ea95c0e61ba563f9da2d0519"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up. Its additional analysis is consistent with the inverter’s inverting operation and the golden solution’s full-credit rule.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 4398,
        "total_tokens": 5509,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2715,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 4398,
        "total_tokens": 5509,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2715,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is the fundamental **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor). It consists of:\n* **$M_1$**: An **n-channel MOSFET (NMOS)** with its source tied to Ground ($0\\text{ V}$).\n* **$M_2$**: A **p-channel MOSFET (PMOS)** with its source tied to the positive supply rail ($V_{DD}$).\n\nTheir gates are tied together to form the input ($V_{\\text{in}}$), and their drains are connected together to form the output ($V_{\\text{out}}$).\n\nThis circuit serves two primary roles in electronics:\n1. **Digital domain:** A standard **logic NOT gate (inverter)**.\n2. **Analog domain:** A **push-pull, complementary common-source amplifier** (current-reuse amplifier).\n\n---\n\n### 1. Digital Operation (Large-Signal Analysis)\n\n#### A. Logic States\n* **Input Low ($V_{\\text{in}} = 0\\text{ V} \\text{ / Logic 0}$):**\n  * $V_{GS1} = 0 < V_{TH1} \\implies \\mathbf{M_1}$ **is OFF (Cutoff)**.\n  * $|V_{GS2}| = V_{DD} > |V_{TH2}| \\implies \\mathbf{M_2}$ **is ON (Triode/Linear)**.\n  * Since no static DC current flows through $M_1$, there is zero voltage drop across $M_2$.\n  * **Output:** $V_{\\text{out}} = V_{DD}$ (Logic 1).\n\n* **Input High ($V_{\\text{in}} = V_{DD} \\text{ / Logic 1}$):**\n  * $V_{GS1} = V_{DD} > V_{TH1} \\implies \\mathbf{M_1}$ **is ON (Triode/Linear)**.\n  * $|V_{GS2}| = 0 < |V_{TH2}| \\implies \\mathbf{M_2}$ **is OFF (Cutoff)**.\n  * Zero current flows, so $M_1$ pulls the output all the way to ground.\n  * **Output:** $V_{\\text{out}} = 0\\text{ V}$ (Logic 0).\n\n#### B. Voltage Transfer Characteristics (VTC)\nAs $V_{\\text{in}}$ sweeps from $0$ to $V_{DD}$, the circuit passes through five operating regions:\n\n| Region | Input Range ($V_{\\text{in}}$) | $M_1$ State | $M_2$ State | Output Voltage ($V_{\\text{out}}$) |\n| :---: | :---: | :---: | :---: | :---: |\n| **I** | $0 \\le V_{\\text{in}} < V_{TH1}$ | Cutoff | Triode | $V_{DD}$ |\n| **II** | $V_{TH1} \\le V_{\\text{in}} < V_M$ | Saturation | Triode | Drops gradually from $V_{DD}$ |\n| **III** | $V_{\\text{in}} \\approx V_M$ (Switching threshold) | **Saturation** | **Saturation** | Sharp transition ($\\approx V_{DD}/2$) |\n| **IV** | $V_M < V_{\\text{in}} \\le V_{DD} - \\|V_{TH2}\\|$ | Triode | Saturation | Approaches $0\\text{ V}$ |\n| **V** | $V_{DD} - \\|V_{TH2}\\| < V_{\\text{in}} \\le V_{DD}$ | Triode | Cutoff | $0\\text{ V}$ |\n\n#### C. Switching Threshold ($V_M$)\nThe switching threshold ($V_M$) is defined where $V_{\\text{in}} = V_{\\text{out}}$. At this point, both transistors are in saturation:\n$$I_{D1} = I_{D2}$$\n$$\\frac{1}{2} k_n' \\left(\\frac{W}{L}\\right)_1 (V_M - V_{TH1})^2 = \\frac{1}{2} k_p' \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_M - |V_{TH2}|)^2$$\n\nSolving for $V_M$:\n$$V_M = \\frac{V_{TH1} + \\sqrt{\\frac{k_p}{k_n}}(V_{DD} - |V_{TH2}|)}{1 + \\sqrt{\\frac{k_p}{k_n}}}$$\nWhere $k_n = \\mu_n C_{ox} (W/L)_1$ and $k_p = \\mu_p C_{ox} (W/L)_2$.\n\n* To achieve a symmetric trip point ($V_M = V_{DD}/2$) when $V_{TH1} = |V_{TH2}|$, the aspect ratios are sized such that $k_n = k_p$. Because electrons are faster than holes ($\\mu_n \\approx 2\\text{--}3 \\times \\mu_p$), the PMOS is typically sized wider:\n  $$\\left(\\frac{W}{L}\\right)_2 \\approx (2 \\text{ to } 3) \\times \\left(\\frac{W}{L}\\right)_1$$\n\n#### D. Power Dissipation\n* **Static Power:** Virtually **zero** because in steady-state (high or low), one of the transistors is always in cutoff (neglecting subthreshold leakage).\n* **Dynamic Power:** Dominated by charging/discharging the load capacitance $C_L$ and short-circuit current during transitions:\n  $$P_{\\text{dynamic}} = C_L V_{DD}^2 f + I_{\\text{peak}} t_{sc} V_{DD} f$$\n\n---\n\n### 2. Analog Operation (Small-Signal Amplifier)\n\nWhen biased in **Region III** (typically via a large feedback resistor between output and input to set $V_{\\text{in}} = V_{\\text{out}} = V_M$), both transistors operate in the **saturation region** simultaneously. \n\nIn this configuration, the circuit acts as a **self-biased / complementary common-source amplifier**:\n\n#### A. Transconductance ($G_m$) and Current Reuse\nBoth devices contribute constructively to amplifying the input signal:\n* A positive increment $\\Delta v_{\\text{in}}$ increases the pull-down current through $M_1$ by $g_{m1} v_{\\text{in}}$.\n* The same $\\Delta v_{\\text{in}}$ decreases the pull-up current through $M_2$ by $g_{m2} v_{\\text{in}}$.\n\nThe effective total transconductance is:\n$$G_m = g_{m1} + g_{m2}$$\n\nBecause the same bias current $I_{DD}$ flows through both $M_1$ and $M_2$, this topology achieves **current reuse**, yielding roughly twice the transconductance of a standard single-transistor stage for the same supply current.\n\n#### B. Output Resistance ($R_{\\text{out}}$)\nBoth drain terminals are tied together:\n$$R_{\\text{out}} = r_{o1} \\parallel r_{o2} = \\frac{1}{\\lambda_1 I_D + \\lambda_2 I_D}$$\n\n#### C. Small-Signal Voltage Gain ($A_v$)\nThe open-circuit voltage gain is:\n$$A_v = -G_m R_{\\text{out}} = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$$\n\n#### D. Input Capacitance (Miller Effect)\nThe total input capacitance includes the Miller-multiplied gate-drain capacitances:\n$$C_{\\text{in}} = (C_{gs1} + C_{gs2}) + (1 + |A_v|)(C_{gd1} + C_{gd2})$$\n\n---\n\n### Key Advantages & Disadvantages\n\n| Advantages | Disadvantages |\n| :--- | :--- |\n| **Rail-to-rail output swing** ($0$ to $V_{DD}$). | **Poor PSRR (Power Supply Rejection Ratio):** Variations on $V_{DD}$ couple directly to the output via $M_2$. |\n| **Zero static power dissipation** in digital steady states. | Highly sensitive to PVT (process, voltage, temperature) variations when biased as an analog amplifier. |\n| **High $g_m/I_D$ efficiency** due to complementary current-reuse. | Significant input capacitance due to the **Miller effect** acting on both $C_{gd1}$ and $C_{gd2}$. |",
        "format": "markdown",
        "sha256": "5a609a7dad503fd24337385542a6020ed585d6923bde994a4ff6b02519e80c86"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and describes the complementary logic operation. The additional analysis does not contradict the inverter’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 5205,
        "total_tokens": 6316,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3276,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 5205,
        "total_tokens": 6316,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3276,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is the fundamental **CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**. It consists of:\n* **$M_1$**: An **NMOS** transistor (pull-down network) with its source connected to ground ($0\\text{ V}$).\n* **$M_2$**: A **PMOS** transistor (pull-up network) with its source connected to the positive supply voltage ($V_{DD}$).\n* The gates of both transistors are tied together to form the input ($V_{\\text{in}}$).\n* The drains of both transistors are tied together to form the output ($V_{\\text{out}}$).\n\nThis circuit can be analyzed in two domains: **Digital (Logic Inverter)** and **Analog (Inverter-Based Amplifier)**.\n\n---\n\n### 1. Digital Operation (Logic NOT Gate)\n\nIn digital circuits, the CMOS inverter functions as a standard logic NOT gate.\n\n| Input Logic ($V_{\\text{in}}$) | $M_1$ (NMOS) State | $M_2$ (PMOS) State | Output Voltage ($V_{\\text{out}}$) | Output Logic |\n| :--- | :--- | :--- | :--- | :--- |\n| **LOW** ($\\approx 0\\text{ V}$) | **OFF** ($V_{GS1} < V_{TH,N}$) | **ON / Triode** ($|V_{GS2}| \\approx V_{DD} > |V_{TH,P}|$) | $V_{DD}$ | **HIGH** ('1') |\n| **HIGH** ($\\approx V_{DD}$) | **ON / Triode** ($V_{GS1} \\approx V_{DD} > V_{TH,N}$) | **OFF** ($|V_{GS2}| < |V_{TH,P}|$) | $0\\text{ V}$ (GND) | **LOW** ('0') |\n\n#### Key Digital Features:\n* **Zero Static Power Dissipation:** In steady-state ('0' or '1'), one of the two transistors is completely turned off, creating an open circuit between $V_{DD}$ and ground (neglecting small subthreshold/leakage currents).\n* **Rail-to-Rail Output Swing:** The output swings fully from $0\\text{ V}$ to $V_{DD}$, providing maximum noise margins.\n* **Extremely High Input Impedance:** Since the input connects directly to the insulated oxide gates of $M_1$ and $M_2$, the DC input current is virtually zero.\n\n---\n\n### 2. Voltage Transfer Characteristic (VTC)\n\nAs the input voltage sweeps continuously from $0\\text{ V}$ to $V_{DD}$, the circuit transitions through five operating regions:\n\n| Region | Input Range | $M_1$ (NMOS) Mode | $M_2$ (PMOS) Mode | Output Behavior |\n| :---: | :--- | :---: | :---: | :--- |\n| **A** | $0 \\le V_{\\text{in}} < V_{TH,N}$ | Cutoff | Triode | $V_{\\text{out}} = V_{DD}$ |\n| **B** | $V_{TH,N} \\le V_{\\text{in}} < V_M$ | Saturation | Triode | $V_{\\text{out}}$ begins to drop sharply |\n| **C** | $V_{\\text{in}} = V_M \\approx V_{DD}/2$ | **Saturation** | **Saturation** | High gain region (steep transition) |\n| **D** | $V_M < V_{\\text{in}} \\le V_{DD} - |V_{TH,P}|$ | Triode | Saturation | $V_{\\text{out}}$ drops close to $0$ |\n| **E** | $V_{DD} - |V_{TH,P}| < V_{\\text{in}} \\le V_{DD}$ | Triode | Cutoff | $V_{\\text{out}} = 0\\text{ V}$ |\n\n#### Switching Threshold ($V_M$ / Trip Point):\nThe switching threshold $V_M$ is defined where $V_{\\text{in}} = V_{\\text{out}}$. At this point, both transistors are in saturation ($I_{D1} = I_{D2}$):\n\n$$V_M = \\frac{V_{TH,N} + \\sqrt{\\frac{k_p}{k_n}} \\left(V_{DD} - |V_{TH,P}|\\right)}{1 + \\sqrt{\\frac{k_p}{k_n}}}$$\n\nwhere $k_n = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1$ and $k_p = \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2$.\n\n* To achieve a symmetric inverter with $V_M = \\frac{V_{DD}}{2}$ (assuming equal threshold magnitudes $V_{TH,N} = |V_{TH,P}|$):\n  $$\\frac{(W/L)_2}{(W/L)_1} \\approx \\frac{\\mu_n}{\\mu_p} \\approx 2 \\text{ to } 3$$\n  *(The PMOS must typically be designed 2–3 times wider than the NMOS because electron mobility $\\mu_n$ is higher than hole mobility $\\mu_p$.)*\n\n---\n\n### 3. Analog Operation (Push-Pull / Complementary CS Amplifier)\n\nWhen biased around the transition region (Region C, typically using a large feedback resistor between output and input so that $V_{\\text{in}} = V_{\\text{out}} = V_M$), the CMOS inverter acts as a **complementary self-biased common-source amplifier**.\n\n#### Small-Signal Equivalent Model:\n* Both devices operate simultaneously as common-source gain stages loaded by each other.\n* **Effective Transconductance ($G_m$):** Both transistors convert input voltage variations into output current:\n  $$G_m = g_{m1} + g_{m2}$$\n* **Output Resistance ($R_{\\text{out}}$):**\n  $$R_{\\text{out}} = r_{o1} \\parallel r_{o2} = \\frac{1}{\\lambda_1 I_D + \\lambda_2 I_D}$$\n* **Small-Signal Voltage Gain ($A_v$):**\n  $$A_v = - G_m R_{\\text{out}} = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$$\n\n#### Key Analog Advantages:\n1. **Current Reuse:** The same DC bias current passes through both $M_1$ and $M_2$, effectively doubling the transconductance-to-current ratio ($g_m/I_D$) compared to a standard resistively loaded or current-source-loaded CS stage.\n2. **Push-Pull (Class-AB) Capability:** When driven by large signals, it can source and sink dynamic currents significantly larger than its quiescent current, making it power-efficient for driving capacitive loads.\n3. **High Gain per Stage:** A typical single stage provides open-loop voltage gains on the order of $20\\text{ dB}$ to $40\\text{ dB}$ depending on channel lengths.",
        "format": "markdown",
        "sha256": "c5d1d24d956acddd4e7b5e1e2e20cb12d0023643d815fadee5db04feadb0c7e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and their operation. The additional digital and analog analysis is consistent with the circuit and does not contradict the essential answer.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3997,
        "total_tokens": 5108,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3997,
        "total_tokens": 5108,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a classic conceptual puzzle in analog integrated circuit design (often discussed in texts and articles by Prof. Behzad Razavi). It consists of an NMOS source follower ($M_1$) driving an NMOS active load ($M_2$), with their gates tied together to the common input $V_{\\text{in}}$.\n\n---\n\n### 1. Circuit Overview\n* **$M_1$:** An NMOS transistor whose drain is tied to $V_{DD}$, gate to $V_{\\text{in}}$, and source to $V_{\\text{out}}$. It acts as a **source follower (common-drain stage)**.\n* **$M_2$:** An NMOS transistor whose drain is tied to $V_{\\text{out}}$, gate to $V_{\\text{in}}$, and source to ground. It acts as a **common-source pull-down load**, but its gate is driven in-phase with the input.\n\n---\n\n### 2. Operating Regions: Can Both Transistors Be in Saturation?\n\nA critical insight of this circuit is determining whether both transistors can be in saturation simultaneously.\n\n1. **Condition for $M_1$ to be ON and in saturation:**\n   $$V_{GS1} > V_{TH1} \\implies V_{\\text{in}} - V_{\\text{out}} > V_{TH1} \\implies V_{\\text{out}} < V_{\\text{in}} - V_{TH1}$$\n   *(Assuming $V_{DD}$ is sufficiently large so $V_{DS1} \\ge V_{GS1} - V_{TH1}$).*\n\n2. **Condition for $M_2$ to be in saturation:**\n   $$V_{DS2} \\ge V_{GS2} - V_{TH2} \\implies V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH2}$$\n\n3. **Comparing the two conditions:**\n   For both transistors to operate in saturation simultaneously, $V_{\\text{out}}$ must satisfy:\n   $$V_{\\text{in}} - V_{TH2} \\le V_{\\text{out}} < V_{\\text{in}} - V_{TH1}$$\n   which requires:\n   $$V_{TH1} < V_{TH2}$$\n\nIn standard CMOS fabrication on a common p-substrate:\n* The source of $M_2$ is at $0\\text{ V}$, so its body bias is $V_{SB2} = 0 \\implies V_{TH2} = V_{TH0}$.\n* The source of $M_1$ is at $V_{\\text{out}} \\ge 0$, so due to the body effect ($\\gamma > 0$):\n  $$V_{TH1} = V_{TH0} + \\gamma\\left(\\sqrt{2\\Phi_F + V_{\\text{out}}} - \\sqrt{2\\Phi_F}\\right) \\ge V_{TH2}$$\n\nBecause $V_{TH1} \\ge V_{TH2}$, the required interval is impossible. \n\n> **Conclusion on Operating Regions:**  \n> **$M_1$ and $M_2$ cannot be simultaneously in saturation while carrying non-zero current.**  \n> If $M_1$ is ON, then $V_{\\text{out}} < V_{\\text{in}} - V_{TH1} \\le V_{\\text{in}} - V_{TH2}$, which forces **$M_2$ to operate in the triode (linear) region**.\n\n---\n\n### 3. The \"Naive Saturation\" Fallacy (The Textbook Trap)\n\nIf one blindly assumes both devices are in saturation and equates their currents:\n$$I_{D1} = I_{D2} \\implies \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{\\text{out}} - V_{TH})^2 = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{\\text{in}} - V_{TH})^2$$\n\nThis yields:\n$$A_v = \\frac{\\partial V_{\\text{out}}}{\\partial V_{\\text{in}}} = 1 - \\sqrt{\\frac{(W/L)_2}{(W/L)_1}} = 1 - \\frac{g_{m2}}{g_{m1}}$$\n\nThis naive analysis incorrectly predicts that:\n* If $(W/L)_1 = (W/L)_2$, the gain is zero ($A_v = 0$).\n* If $(W/L)_2 > (W/L)_1$, the gain is negative (inverting).\n\nAs established in Section 2, this operating state is physically impossible with standard enhancement devices.\n\n---\n\n### 4. Correct Large-Signal (DC) Analysis\n\nLet $k_1 = \\mu_n C_{ox}(W/L)_1$ and $k_2 = \\mu_n C_{ox}(W/L)_2$. Assuming $V_{TH1} \\approx V_{TH2} = V_{TH}$:\n* **$M_1$ in Saturation:**\n  $$I_{D1} = \\frac{1}{2}k_1 (V_{\\text{in}} - V_{\\text{out}} - V_{TH})^2$$\n* **$M_2$ in Triode:**\n  $$I_{D2} = k_2 \\left[(V_{\\text{in}} - V_{TH})V_{\\text{out}} - \\frac{1}{2}V_{\\text{out}}^2\\right]$$\n\nEquating $I_{D1} = I_{D2}$:\n$$\\frac{1}{2}k_1 (V_{\\text{in}} - V_{\\text{out}} - V_{TH})^2 = k_2\\left[(V_{\\text{in}} - V_{TH})V_{\\text{out}} - \\frac{1}{2}V_{\\text{out}}^2\\right]$$\n\nRearranging into a quadratic equation in $V_{\\text{out}}$:\n$$V_{\\text{out}}^2 - 2(V_{\\text{in}} - V_{TH})V_{\\text{out}} + \\frac{k_1}{k_1 + k_2}(V_{\\text{in}} - V_{TH})^2 = 0$$\n\nSolving for $V_{\\text{out}}$:\n$$V_{\\text{out}} = (V_{\\text{in}} - V_{TH})\\left[1 \\pm \\sqrt{1 - \\frac{k_1}{k_1 + k_2}}\\right] = (V_{\\text{in}} - V_{TH})\\left[1 \\pm \\sqrt{\\frac{k_2}{k_1 + k_2}}\\right]$$\n\nSince $M_2$ must be in the triode region ($V_{\\text{out}} < V_{\\text{in}} - V_{TH}$), only the **minus sign** is physically valid:\n\n$$\\mathbf{V_{\\text{out}} = \\left(1 - \\sqrt{\\frac{(W/L)_2}{(W/L)_1 + (W/L)_2}}\\right)(V_{\\text{in}} - V_{TH})}$$\n\nNotice that:\n* Since $\\sqrt{\\frac{k_2}{k_1 + k_2}} < 1$, $V_{\\text{out}}$ is **strictly positive** and **strictly less than $(V_{\\text{in}} - V_{TH})$**, confirming self-consistency.\n* The large-signal transfer characteristic is **strictly linear** (under square-law MOSFET assumptions).\n\n---\n\n### 5. Small-Signal Analysis\n\n#### A. Voltage Gain ($A_v$)\nDifferentiating the large-signal equation with respect to $V_{\\text{in}}$:\n$$A_v = \\frac{d V_{\\text{out}}}{d V_{\\text{in}}} = 1 - \\sqrt{\\frac{(W/L)_2}{(W/L)_1 + (W/L)_2}}$$\n\nWe can also derive this from the small-signal model:\n* For $M_1$ (saturation):\n  $$i_{d1} = g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1}v_{\\text{out}}$$\n* For $M_2$ (triode):\n  $$i_{d2} = g_{m2,\\text{triode}}v_{\\text{in}} + g_{ds2}v_{\\text{out}}$$\n  where:\n  $$g_{m2,\\text{triode}} = \\frac{\\partial I_{D2}}{\\partial V_{GS2}} = k_2 V_{\\text{out}}$$\n  $$g_{ds2} = \\frac{\\partial I_{D2}}{\\partial V_{DS2}} = k_2(V_{\\text{in}} - V_{TH} - V_{\\text{out}}) \\approx \\frac{1}{R_{\\text{on2}}}$$\n\nSetting $i_{d1} = i_{d2}$ (ignoring body effect $g_{mb1}$ and channel length modulation $g_{ds1}$ for simplicity):\n$$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) = g_{m2,\\text{triode}}v_{\\text{in}} + g_{ds2}v_{\\text{out}}$$\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} - g_{m2,\\text{triode}}}{g_{m1} + g_{ds2}}$$\n\nSubstituting the DC bias values of $g_{m1}$, $g_{m2,\\text{triode}}$, and $g_{ds2}$ yields the exact same closed-form expression:\n$$A_v = 1 - \\sqrt{\\frac{(W/L)_2}{(W/L)_1 + (W/L)_2}}$$\n\n**Key Gain Properties:**\n1. **Always positive and less than unity:** $0 < A_v < 1$ for all finite device dimensions.\n2. **Never zero:** Unlike the naive prediction, identical devices ($(W/L)_1 = (W/L)_2$) produce:\n   $$A_v = 1 - \\sqrt{\\frac{1}{2}} = 1 - \\frac{1}{\\sqrt{2}} \\approx 0.293$$\n3. **If body effect ($g_{mb1}$) and channel-length modulation are included:**\n   $$A_v = \\frac{g_{m1} - g_{m2,\\text{triode}}}{g_{m1} + g_{mb1} + g_{ds1} + g_{ds2}}$$\n\n---\n\n### 6. Impedances\n\n* **Output Resistance ($R_{\\text{out}}$):**  \n  Setting $v_{\\text{in}} = 0$ and applying a test voltage $v_x$ at $V_{\\text{out}}$:\n  $$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1} + g_{ds1} + g_{ds2}} \\approx \\frac{1}{g_{m1} + g_{ds2}}$$\n  Since $M_2$ is in the triode region, $g_{ds2}$ is relatively large, resulting in a **lower output resistance** than a standard source follower.\n\n* **Input Impedance ($R_{\\text{in}}$):**  \n  At low frequencies:\n  $$R_{\\text{in}} \\to \\infty$$\n  The total input capacitance is:\n  $$C_{\\text{in}} = C_{gs1}(1 - A_v) + C_{gd1} + C_{gs2} + C_{gd2}(1 - A_v)$$\n  Both $C_{gs1}$ and $C_{gd2}$ benefit from bootstrapping since $0 < A_v < 1$, reducing the effective capacitance.\n\n---\n\n### Summary Table\n\n| Parameter | Value / Expression |\n| :--- | :--- |\n| **Operating Region of $M_1$** | **Saturation** (for $V_{\\text{in}} > V_{TH1}$) |\n| **Operating Region of $M_2$** | **Triode** (forced by $V_{\\text{out}} < V_{\\text{in}} - V_{TH}$) |\n| **Simultaneous Saturation?** | **No** (impossible for standard $V_{TH1} \\ge V_{TH2}$) |\n| **DC Output Voltage $V_{\\text{out}}$** | $\\left(1 - \\sqrt{\\frac{(W/L)_2}{(W/L)_1 + (W/L)_2}}\\right)(V_{\\text{in}} - V_{TH})$ |\n| **Small-Signal Gain ($A_v$)** | $1 - \\sqrt{\\frac{(W/L)_2}{(W/L)_1 + (W/L)_2}}$ |\n| **Gain for Matched Devices ($M_1 = M_2$)** | $1 - \\frac{1}{\\sqrt{2}} \\approx \\mathbf{0.293}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m1} + g_{ds2}}$ |",
        "format": "markdown",
        "sha256": "611620fb7d96b31af86e01274cfe1f9ed0b7d77767e60fd5c7c5e270fa87f11f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies both devices as NMOS, describes the upper source follower and lower pull-down, and shows the resulting response is non-inverting rather than a normal CMOS inverter. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 17106,
        "total_tokens": 18207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14161,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 17106,
        "total_tokens": 18207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14161,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a classic analog circuit puzzle (frequently featured in Behzad Razavi’s *“The Analog Mind”* series). It consists of two NMOS transistors, $M_1$ and $M_2$, driven simultaneously by the input voltage $V_{\\text{in}}$.\n\n---\n\n### 1. Circuit Topology and Intuitive Overview\n\n* **$M_1$ (Top transistor):** Configured as a **source follower (common-drain stage)**. As $V_{\\text{in}}$ rises, $M_1$ tries to pull $V_{\\text{out}}$ **up**.\n* **$M_2$ (Bottom transistor):** Configured as a **common-source stage**. As $V_{\\text{in}}$ rises, $M_2$ draws more current and tries to pull $V_{\\text{out}}$ **down**.\n* **The Competition:** The circuit embodies an inherent push-pull conflict: both devices are NMOS and driven by the same gate voltage, so one pulls up while the other pulls down.\n\n---\n\n### 2. DC Operating Regions: A Critical Insight\n\nA very common pitfall in analyzing this circuit is assuming that both $M_1$ and $M_2$ operate in the saturation region. **In reality, $M_2$ can never be in saturation when both transistors conduct.**\n\n#### Proof:\n1. For $M_1$ to conduct, its gate-source voltage must exceed its threshold voltage:\n   $$V_{GS1} = V_{\\text{in}} - V_{\\text{out}} > V_{TH1}$$\n   Rearranging gives:\n   $$V_{\\text{out}} < V_{\\text{in}} - V_{TH1}$$\n\n2. Transistor $M_1$ is subject to body effect because its source is at $V_{\\text{out}} > 0$ while its substrate (body) is at ground ($V_{SB1} = V_{\\text{out}}$). In contrast, $M_2$ has its source at ground ($V_{SB2} = 0$). Therefore:\n   $$V_{TH1} \\ge V_{TH2}$$\n\n3. Combining these inequalities:\n   $$V_{\\text{out}} < V_{\\text{in}} - V_{TH1} \\le V_{\\text{in}} - V_{TH2}$$\n\n4. Now look at $M_2$:\n   * Drain-source voltage: $V_{DS2} = V_{\\text{out}}$\n   * Overdrive voltage (saturation condition): $V_{DS,\\text{sat2}} = V_{GS2} - V_{TH2} = V_{\\text{in}} - V_{TH2}$\n\n   Comparing the two:\n   $$V_{DS2} < V_{GS2} - V_{TH2}$$\n\n> **Conclusion:** $M_2$ is **strictly in the triode (linear) region** whenever $M_1$ is ON. \n\n#### Operating Region of $M_1$:\nFor $M_1$ to remain in saturation:\n$$V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_{DD} - V_{\\text{out}} \\ge V_{\\text{in}} - V_{\\text{out}} - V_{TH1} \\implies V_{\\text{in}} \\le V_{DD} + V_{TH1}$$\nAs long as $V_{\\text{in}}$ stays below $V_{DD} + V_{TH1}$, **$M_1$ operates in saturation**.\n\n---\n\n### 3. Large-Signal DC Transfer Characteristic\n\n* **Region 1 ($V_{\\text{in}} < V_{TH2}$):**\n  Both transistors are OFF. No current flows, and $V_{\\text{out}} = 0$.\n\n* **Region 2 ($V_{\\text{in}} > V_{TH2}$):**\n  $M_1$ is in saturation and $M_2$ is in triode. Equating the drain currents ($I_{D1} = I_{D2}$):\n  $$\\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{\\text{out}} - V_{TH1})^2 = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 \\left[ (V_{\\text{in}} - V_{TH2})V_{\\text{out}} - \\frac{1}{2}V_{\\text{out}}^2 \\right]$$\n\n  * For moderate to large $V_{\\text{in}}$, $V_{\\text{out}}$ rises monotonically with $V_{\\text{in}}$, but stays well below $V_{\\text{in}} - V_{TH}$.\n  * For very large $V_{\\text{in}}$, dividing by $V_{\\text{in}}^2$ shows that $V_{\\text{out}}$ asymptotically scales linearly with $V_{\\text{in}}$ with a slope between $0$ and $1$.\n\n---\n\n### 4. Small-Signal Analysis & Voltage Gain ($A_v$)\n\nUsing the proper operating regions ($M_1$ saturated, $M_2$ in triode):\n\n1. **Current generated by $M_1$:**\n   $$i_{d1} = g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1}v_{\\text{out}} - g_{o1}v_{\\text{out}}$$\n   *(where $g_{mb1}$ represents the body effect on $M_1$, and $g_{o1} = 1/r_{O1}$)*\n\n2. **Current generated by $M_2$ (in triode):**\n   $$i_{d2} = g_{m2}v_{\\text{in}} + g_{ds2}v_{\\text{out}}$$\n   where:\n   $$g_{m2} = \\frac{\\partial I_{D2}}{\\partial V_{\\text{in}}} = \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 V_{\\text{out}}$$\n   $$g_{ds2} = \\frac{1}{R_{\\text{on2}}} = \\frac{\\partial I_{D2}}{\\partial V_{\\text{out}}} = \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{\\text{in}} - V_{TH2} - V_{\\text{out}})$$\n\n3. **Applying KCL at the $V_{\\text{out}}$ node ($i_{d1} = i_{d2}$):**\n   $$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - (g_{mb1} + g_{o1})v_{\\text{out}} = g_{m2}v_{\\text{in}} + g_{ds2}v_{\\text{out}}$$\n   $$(g_{m1} - g_{m2})v_{\\text{in}} = (g_{m1} + g_{mb1} + g_{ds2} + g_{o1})v_{\\text{out}}$$\n\n   $$\\mathbf{A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + g_{ds2} + g_{o1}}}$$\n\n#### Gain Properties:\n* **Is the gain positive or negative?**\n  Since $M_2$ is in triode and $V_{\\text{out}}$ is relatively small:\n  $$g_{m2} = \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 V_{\\text{out}} \\approx \\frac{I_D}{V_{\\text{in}} - V_{TH2}}$$\n  while for $M_1$ in saturation:\n  $$g_{m1} = \\frac{2I_D}{V_{GS1} - V_{TH1}}$$\n  Because $V_{\\text{in}} - V_{TH2} > V_{GS1} - V_{TH1}$, it follows that **$g_{m1} > g_{m2}$**. Therefore, **the gain is always positive** ($A_v > 0$).\n* **Magnitude:** Because $M_2$ is in the triode region, its drain conductance $g_{ds2} = 1/R_{\\text{on2}}$ is large, heavily attenuating the gain ($A_v \\ll 1$).\n\n---\n\n### 5. Output Resistance ($R_{\\text{out}}$)\n\nSetting $v_{\\text{in}} = 0$ and looking into the output terminal:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1} + g_{o1} + g_{ds2}} \\approx \\frac{1}{g_{m1} + g_{ds2}}$$\n\nBecause both the source transconductance of $M_1$ ($g_{m1}$) and the channel conductance of $M_2$ ($g_{ds2}$) shunt the output node to AC ground, the circuit features a **very low output resistance**.\n\n---\n\n### Summary of Key Findings\n\n| Parameter / Feature | Value / Behavior |\n| :--- | :--- |\n| **$M_1$ Operating Region** | **Saturation** (for $V_{\\text{in}} \\le V_{DD} + V_{TH1}$) |\n| **$M_2$ Operating Region** | **Triode (Linear)** — *can never enter saturation* |\n| **Voltage Gain ($A_v$)** | $\\displaystyle \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + g_{ds2} + g_{o1}}$ (Positive, but $\\ll 1$) |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\displaystyle \\approx \\frac{1}{g_{m1} + g_{ds2}}$ (Very low) |",
        "format": "markdown",
        "sha256": "2c817b8a454167ca210c01f9cc6ebc6edfdbaf73b47333c6f78ffc551e358272"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, the upper source-follower pull-up and lower pull-down, and the positive-gain behavior captures that this is not a normal CMOS inverter. The claim that the output is necessarily zero when both devices are off is a minor overstatement.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 12034,
        "total_tokens": 13135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 12034,
        "total_tokens": 13135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit consists of two NMOS transistors, $M_1$ and $M_2$, driven simultaneously by the input voltage $V_{\\text{in}}$, with the output taken from their intermediate node. \n\n---\n\n### 1. Circuit Topology & Qualitative Behavior\n* **Transistor $M_1$** acts as a **Source Follower** (common-drain amplifier):\n  * Input is at the gate, output is at the source, drain is tied to $V_{DD}$.\n  * As $V_{\\text{in}}$ increases, $M_1$ acts to pull $V_{\\text{out}}$ **up** (positive gain, non-inverting).\n* **Transistor $M_2$** acts as a **Common-Source** amplifier:\n  * Input is at the gate, output is at the drain, source is grounded.\n  * As $V_{\\text{in}}$ increases, $M_2$ pulls more current to ground, acting to pull $V_{\\text{out}}$ **down** (negative gain, inverting).\n\nBecause both gates are driven by the same signal, the two transistors **oppose each other**: $M_1$ tries to increase $V_{\\text{out}}$, while $M_2$ tries to decrease $V_{\\text{out}}$.\n\n---\n\n### 2. Operating Regions (DC Analysis)\n\nA critical question is whether both transistors can simultaneously operate in the **saturation region**:\n\n1. **For $M_1$ to be in saturation:**\n   $$V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_{DD} - V_{\\text{out}} \\ge (V_{\\text{in}} - V_{\\text{out}}) - V_{TH1} \\implies V_{\\text{in}} \\le V_{DD} + V_{TH1}$$\n   This condition is easily satisfied for normal supply and input ranges.\n\n2. **For $M_2$ to be in saturation:**\n   $$V_{DS2} \\ge V_{GS2} - V_{TH2} \\implies V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH2}$$\n\n3. **Interdependence via $V_{\\text{out}}$:**\n   From the gate-source voltage of $M_1$:\n   $$V_{\\text{out}} = V_{\\text{in}} - V_{GS1}$$\n   Substituting this into the saturation condition for $M_2$:\n   $$V_{\\text{in}} - V_{GS1} \\ge V_{\\text{in}} - V_{TH2} \\implies V_{GS1} \\le V_{TH2}$$\n\n   * For $M_1$ to conduct channel current in strong inversion, we must have $V_{GS1} > V_{TH1}$.\n   * In a standard fabrication process where both are typical NMOS devices, $V_{TH1} \\ge V_{TH2}$ (in fact, due to the body effect, $V_{TH1} > V_{TH2}$ because the source of $M_1$ is at $V_{\\text{out}} > 0$).\n   * Therefore, $V_{GS1} > V_{TH1} \\ge V_{TH2}$, which directly contradicts $V_{GS1} \\le V_{TH2}$.\n\n> **Key Insight:** In a standard process, **$M_2$ cannot operate in saturation**; it is forced into the **triode (linear) region**.\n\n---\n\n### 3. Small-Signal Analysis & Voltage Gain\n\n#### General Form\nBy performing KCL at the output node:\n* Small-signal current delivered by $M_1$:\n  $$i_{d1} = g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1} v_{\\text{out}} - g_{ds1} v_{\\text{out}}$$\n* Small-signal current absorbed by $M_2$:\n  $$i_{d2} = g_{m2} v_{\\text{in}} + g_{ds2} v_{\\text{out}}$$\n\nEquating $i_{d1} = i_{d2}$:\n$$(g_{m1} - g_{m2}) v_{\\text{in}} = (g_{m1} + g_{mb1} + g_{ds1} + g_{ds2}) v_{\\text{out}}$$\n\nThus, the overall small-signal voltage gain is:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + g_{ds1} + g_{ds2}}$$\n\n---\n\n#### Case A: Theoretical Case (Both Assumed in Saturation)\nIf we theoretically assume saturation (e.g., using a native/low-$V_{TH}$ device for $M_1$ such that $V_{TH1} < V_{TH2}$):\n$$I_{D1} = I_{D2} = I_D$$\nSince $g_m = \\sqrt{2\\mu_n C_{ox}(W/L)I_D}$, the transconductance ratio is:\n$$\\frac{g_{m1}}{g_{m2}} = \\sqrt{\\frac{(W/L)_1}{(W/L)_2}}$$\n\n* **If $(W/L)_1 = (W/L)_2$:** \n  $$g_{m1} = g_{m2} \\implies \\mathbf{A_v = 0}$$\n  The non-inverting gain of the source follower exactly cancels the inverting gain of the common-source stage.\n* **If $(W/L)_1 > (W/L)_2$:** $g_{m1} > g_{m2} \\implies A_v > 0$ (Source-follower action dominates).\n* **If $(W/L)_1 < (W/L)_2$:** $g_{m1} < g_{m2} \\implies A_v < 0$ (Common-source action dominates).\n\n---\n\n#### Case B: Practical Case ($M_1$ in Saturation, $M_2$ in Triode)\nWhen $M_2$ operates in the triode region:\n$$g_{m2} = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 V_{\\text{out}}$$\n$$g_{ds2} \\approx \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{\\text{in}} - V_{TH2})$$\n\nBecause $V_{\\text{out}}$ is relatively small:\n* $g_{m2}$ is small.\n* $g_{ds2}$ is relatively large (acting as a low channel resistance to ground).\n* The gain is typically **positive but significantly attenuated** ($0 < A_v \\ll 1$):\n  $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1} + g_{ds2}}$$\n\n---\n\n### 4. Input and Output Impedance\n\n1. **Input Impedance ($R_{\\text{in}}$):**\n   * At DC / low frequencies, looking into the insulated gates:\n     $$R_{\\text{in}} = \\infty$$\n   * At high frequencies, the input capacitance is:\n     $$C_{\\text{in}} = C_{gs2} + C_{gd2}(1 - A_v) + C_{gd1} + C_{gs1}(1 - A_v)$$\n\n2. **Output Impedance ($R_{\\text{out}}$):**\n   Setting $v_{\\text{in}} = 0$:\n   * Looking up into the source of $M_1$: $R_{up} \\approx \\frac{1}{g_{m1} + g_{mb1}}$\n   * Looking down into the drain of $M_2$: $R_{down} = r_{ds2} = \\frac{1}{g_{ds2}}$\n   \n   Combining both in parallel:\n   $$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1} + g_{ds1} + g_{ds2}}$$\n   Because of the $1/g_{m1}$ and triode conductance $g_{ds2}$ terms, the **output impedance is very low**.\n\n---\n\n### Summary\n| Parameter | Value / Characteristic |\n| :--- | :--- |\n| **Circuit Function** | Competing Source Follower ($M_1$) and Common-Source stage ($M_2$) |\n| **Operating State** | $M_1$ is in **saturation**, $M_2$ is in **triode** (standard threshold voltages) |\n| **Theoretical Feature** | Produces **zero voltage gain** ($A_v = 0$) if both are saturated and matched ($g_{m1} = g_{m2}$) |\n| **Input Impedance** | Extremely high ($\\approx \\infty$ at DC) |\n| **Output Impedance** | Very low ($\\approx 1/g_{m1} \\parallel r_{ds2}$) |",
        "format": "markdown",
        "sha256": "e96bd71b4251e5145bcde17bd9da39c23c8e43fe2fa49d68c6529084995bb398"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper source follower and lower pull-down actions, and characterizes the circuit as a competing-stage structure rather than a normal CMOS inverter. The golden solution’s full-credit rule does not require the additional gain analysis.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 8250,
        "total_tokens": 9351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6219,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 8250,
        "total_tokens": 9351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6219,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Common-Source (CS) Amplifier with a Diode-Connected PMOS Load**. \n\nBelow is a detailed analysis covering its topology, DC transfer characteristics, small-signal gain, voltage swing, and performance trade-offs.\n\n---\n\n### 1. Circuit Identification and Roles\n\n* **$M_1$ (NMOS transistor):** Acts as the **driver (amplifying)** device in a common-source configuration.\n  * Gate: Input voltage ($V_{\\text{in}}$)\n  * Source: Ground ($0\\text{ V}$)\n  * Drain: Output node ($V_{\\text{out}}$)\n* **$M_2$ (PMOS transistor):** Acts as a **diode-connected active load**.\n  * Source: Connected to supply ($V_{DD}$)\n  * Gate and Drain: Tied together to the output node ($V_{\\text{out}}$)\n  * Because $V_{G2} = V_{D2}$, we have:\n    $$|V_{DS2}| = |V_{GS2}| > |V_{GS2}| - |V_{TH2}|$$\n    Therefore, whenever current flows through $M_2$, **it is guaranteed to operate in the saturation region**.\n\n---\n\n### 2. Large-Signal (DC) Transfer Characteristics\n\nAssuming both transistors operate in saturation and neglecting channel-length modulation ($\\lambda = 0$):\n\n1. **Cutoff Region ($V_{\\text{in}} < V_{TH1}$):**\n   * $M_1$ is OFF ($I_{D1} = 0$).\n   * Consequently, $I_{D2} = 0$, pulling the output voltage to:\n     $$V_{\\text{out}} = V_{DD} - |V_{TH2}|$$\n\n2. **Saturation Region ($V_{\\text{in}} > V_{TH1}$ and $V_{\\text{out}} > V_{\\text{in}} - V_{TH1}$):**\n   * Both $M_1$ and $M_2$ carry the same drain current ($I_{D1} = I_{D2}$):\n     $$I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH1})^2$$\n     $$I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{out}} - |V_{TH2}|)^2$$\n\n   * Equating $I_{D1} = I_{D2}$ and solving for $V_{\\text{out}}$:\n     $$V_{\\text{out}} = V_{DD} - |V_{TH2}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} (V_{\\text{in}} - V_{TH1})$$\n\n   * **Key Insight:** The transfer characteristic is **linear** within this region. The non-linear quadratic (square-law) terms cancel out because both transistors are in saturation and share the same current.\n\n3. **Triode Region ($V_{\\text{out}} < V_{\\text{in}} - V_{TH1}$):**\n   * As $V_{\\text{in}}$ continues to rise, $V_{\\text{out}}$ drops until $M_1$ enters the triode region. The gain drops sharply, and the output slowly approaches $0\\text{ V}$.\n\n---\n\n### 3. Small-Signal Analysis\n\n#### a. Load Resistance ($R_L$)\nLooking into the drain of diode-connected PMOS $M_2$:\n* The gate is tied to the drain, so its impedance is dominated by $1/g_{m2}$.\n* In an n-well CMOS process, the bulk of $M_2$ is typically tied to its source ($V_{DD}$), meaning there is **no body effect** ($g_{mb2} = 0$).\n* Accounting for channel-length modulation:\n  $$R_L = \\frac{1}{g_{m2}} \\parallel r_{o2}$$\n\n#### b. Output Resistance ($R_{\\text{out}}$)\nLooking into the output node:\n$$R_{\\text{out}} = r_{o1} \\parallel R_L = r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}} \\approx \\frac{1}{g_{m2}}$$\n\n#### c. Voltage Gain ($A_v$)\nThe small-signal voltage gain is:\n$$A_v = -G_m R_{\\text{out}} = -g_{m1} \\left( \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2} \\right)$$\n\nNeglecting channel-length modulation ($r_{o1}, r_{o2} \\gg 1/g_{m2}$):\n$$A_v \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\nSubstituting $g_m = \\sqrt{2 \\mu C_{ox} (W/L) I_D}$:\n$$A_v \\approx -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n* **Key Takeaway:** The small-signal gain depends solely on the aspect ratios and mobility ratios, making it **independent of bias current and input signal amplitude** (to a first order).\n\n---\n\n### 4. Output Voltage Swing\n\n* **Maximum Output Voltage ($V_{\\text{out,max}}$):**\n  $$V_{\\text{out,max}} = V_{DD} - |V_{TH2}|$$\n  Unlike a resistive load or a current-source load which can swing up to $V_{DD}$, the diode-connected load loses a threshold voltage $|V_{TH2}|$ of headroom.\n\n* **Minimum Output Voltage ($V_{\\text{out,min}}$):**\n  To keep $M_1$ in saturation:\n  $$V_{\\text{out,min}} = V_{\\text{in}} - V_{TH1} = V_{ov1}$$\n\n---\n\n### 5. Summary of Characteristics\n\n| Metric | Property |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | Moderate to low: $-\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$ |\n| **Linearity** | High (square-law cancellation in saturation) |\n| **Body Effect** | None for $M_2$ (if n-well is tied to $V_{DD}$) and none for $M_1$ |\n| **Output Resistance** | Low: $R_{\\text{out}} \\approx 1/g_{m2}$ |\n| **Headroom / Swing** | Limited at the top by $|V_{TH2}|$ |\n| **Area Requirement** | Large $A_v$ requires a very large $(W/L)_1 / (W/L)_2$ ratio, consuming significant silicon area |",
        "format": "markdown",
        "sha256": "d8daf3612744e1f38311f78f3cf382e7b1af7899af76610f9bf21dde112546a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain both with consistent channel-length modulation and in the ideal case. The additional large-signal discussion is secondary to the required analysis.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 5078,
        "total_tokens": 6179,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3497,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 5078,
        "total_tokens": 6179,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3497,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is an **NMOS Common-Source (CS) Amplifier with a Diode-Connected PMOS Load**.\n\n---\n\n### 1. Circuit Identification and Roles\n\n* **$M_1$ (NMOS):** Functions as the input/driver transistor. The input signal $V_{\\text{in}}$ is applied to its gate, and its source is grounded.\n* **$M_2$ (PMOS):** Functions as an active load. Because its gate is tied directly to its drain ($V_{G2} = V_{D2} = V_{\\text{out}}$), it is **diode-connected**. \n* **$V_{\\text{out}}$:** Taken at the node between the drain of $M_1$ and the drain of $M_2$.\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nSince $M_2$ is diode-connected, its source-to-drain voltage equals its source-to-gate voltage:\n$$V_{SD2} = V_{SG2} = V_{DD} - V_{\\text{out}}$$\n\nBecause $V_{SD2} > V_{SG2} - |V_{THP}|$, **$M_2$ is always in saturation** whenever it is conducting (i.e., when $V_{\\text{out}} \\le V_{DD} - |V_{THP}|$).\n\n#### Transfer Characteristic Regions:\n1. **Cutoff Region ($V_{\\text{in}} < V_{THN1}$):**\n   * $M_1$ is OFF ($I_{D1} = 0$).\n   * No current flows through $M_2$, setting $V_{SG2} = |V_{THP}|$.\n   * The maximum output voltage is:\n     $$V_{\\text{out,max}} = V_{DD} - |V_{THP}|$$\n\n2. **Active / Amplification Region ($M_1$ in Saturation):**\n   * Both $M_1$ and $M_2$ are in saturation.\n   * Equating the drain currents ($I_{D1} = I_{D2}$), ignoring channel-length modulation ($\\lambda = 0$):\n     $$\\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{THN1})^2 = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{out}} - |V_{THP}|)^2$$\n   * Solving for $V_{\\text{out}}$:\n     $$V_{\\text{out}} = V_{DD} - |V_{THP}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} (V_{\\text{in}} - V_{THN1})$$\n\n3. **Triode Region for $M_1$ ($V_{\\text{in}}$ is large):**\n   * As $V_{\\text{in}}$ increases, $V_{\\text{out}}$ drops until $V_{\\text{out}} \\le V_{\\text{in}} - V_{THN1}$, driving $M_1$ into the triode (linear) region, which reduces the gain.\n\n---\n\n### 3. Small-Signal Analysis\n\n#### A. Small-Signal Parameters\n* Transconductance of $M_1$: $g_{m1} = \\sqrt{2 \\mu_n C_{ox} (W/L)_1 I_D}$\n* Transconductance of $M_2$: $g_{m2} = \\sqrt{2 \\mu_p C_{ox} (W/L)_2 I_D}$\n* Small-signal impedance of the diode-connected load $M_2$:\n  $$R_{L} \\approx \\frac{1}{g_{m2}} \\parallel r_{o2}$$\n  *(Note: Since the body of $M_2$ is typically connected to $V_{DD}$, $V_{BS2} = 0$, meaning there is **no body effect** ($g_{mb2} = 0$)).*\n\n#### B. Voltage Gain ($A_v$)\nThe small-signal gain is given by:\n$$A_v = -g_{m1} R_{\\text{out}} = -g_{m1} \\left( \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2} \\right)$$\n\n* **Neglecting Channel-Length Modulation ($r_{o1}, r_{o2} \\to \\infty$):**\n  $$A_v \\approx -\\frac{g_{m1}}{g_{m2}} = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n* **Including Channel-Length Modulation:**\n  $$A_v = -\\frac{g_{m1}}{g_{m2} + g_{o1} + g_{o2}} = -\\frac{g_{m1}}{g_{m2} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}$$\n\n#### C. Input and Output Resistances\n* **Input Resistance:** Looking into the gate of $M_1$:\n  $$R_{\\text{in}} \\approx \\infty \\quad \\text{(at low frequencies)}$$\n* **Output Resistance:** Looking into the output node:\n  $$R_{\\text{out}} = \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m2}}$$\n\n---\n\n### 4. Key Advantages and Limitations\n\n| Advantages | Limitations |\n| :--- | :--- |\n| **High Linearity:** The voltage gain depends mainly on physical aspect ratios ($(W/L)$) and mobility, making it independent of the bias current to a first order. | **Low Voltage Gain:** Because the load impedance is low ($1/g_{m2}$), the voltage gain is typically modest (usually around $2$ to $5$). |\n| **No Body Effect:** In standard CMOS processes, PMOS can be placed in its own n-well tied to $V_{DD}$, eliminating body-effect nonlinearity (unlike an NMOS diode load). | **Reduced Output Voltage Swing:** The maximum output voltage is limited to $V_{DD} - |V_{THP}|$ (it does not swing all the way to $V_{DD}$). |\n| **High Bandwidth:** The relatively low output resistance ($1/g_{m2}$) places the output pole at a high frequency ($\\omega_p \\approx g_{m2} / C_L$). | |",
        "format": "markdown",
        "sha256": "3a12d00aaa03ba8235ccf3ef67425af71e2cf4609a3eb45b2922b17918e2ee1e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain both with and without channel-length modulation, treating the output resistances consistently.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 3724,
        "total_tokens": 4825,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2229,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 3724,
        "total_tokens": 4825,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2229,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Common-Source (CS) Amplifier with a Diode-Connected PMOS Load**. \n\nBelow is a detailed analysis covering its topology, large-signal behavior, small-signal parameters, and key circuit characteristics.\n\n---\n\n### 1. Circuit Topology\n* **Input Transistor ($M_1$):** An NMOS transistor acting as the driver. The input voltage $V_{\\text{in}}$ is applied to its gate, the source is connected to ground, and the drain is connected to the output node $V_{\\text{out}}$.\n* **Load Transistor ($M_2$):** A PMOS transistor configured as a \"diode-connected\" load. Its source is connected to the supply rail $V_{DD}$, while its gate and drain are tied together at the output node $V_{\\text{out}}$.\n* **Output ($V_{\\text{out}}$):** Taken from the common drain node between $M_1$ and $M_2$.\n\n---\n\n### 2. Large-Signal Analysis (DC Transfer Characteristic)\n\nBecause $M_2$ has its gate tied to its drain, $V_{GD2} = 0$. Since $|V_{DS2}| = |V_{GS2}| > |V_{GS2}| - |V_{TH2}|$, **$M_2$ always operates in saturation** whenever it conducts current.\n\n#### **Region 1: Cutoff ($V_{\\text{in}} < V_{TH1}$)**\n* $M_1$ is OFF ($I_{D1} = 0$).\n* No current flows through $M_2$, meaning $|V_{GS2}| \\approx |V_{TH2}|$.\n* The output voltage sits at:\n  $$V_{\\text{out}} = V_{DD} - |V_{TH2}|$$\n\n#### **Region 2: Active Amplification ($M_1$ and $M_2$ both in Saturation)**\n* As $V_{\\text{in}} > V_{TH1}$, $M_1$ turns on and enters saturation (as long as $V_{\\text{out}} > V_{\\text{in}} - V_{TH1}$).\n* Equating the drain currents (neglecting channel-length modulation $\\lambda = 0$):\n  $$I_{D1} = I_{D2}$$\n  $$\\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH1})^2 = \\frac{1}{2}\\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 \\left(V_{DD} - V_{\\text{out}} - |V_{TH2}|\\right)^2$$\n* Solving for $V_{\\text{out}}$:\n  $$V_{\\text{out}} = V_{DD} - |V_{TH2}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} (V_{\\text{in}} - V_{TH1})$$\n\n> **Key Observation:** Because both transistors follow a square-law relationship with respect to their gate overdrives, the square roots cancel out. Consequently, **the large-signal transfer characteristic is highly linear** in this region.\n\n#### **Region 3: Triode ($V_{\\text{out}} < V_{\\text{in}} - V_{TH1}$)**\n* As $V_{\\text{in}}$ continues to rise, $V_{\\text{out}}$ drops until $M_1$ enters the triode (linear) region.\n* The gain decreases significantly, and $V_{\\text{out}}$ slowly approaches zero.\n\n---\n\n### 3. Small-Signal Analysis\n\n#### **a. Load Impedance ($R_L$)**\nThe small-signal resistance of the diode-connected PMOS transistor looking into its drain is:\n$$R_L \\approx \\frac{1}{g_{m2}} \\parallel r_{O2} \\approx \\frac{1}{g_{m2}}$$\n\n*(Assuming the body of $M_2$ is tied to $V_{DD}$, there is no body effect, so $g_{mb2} = 0$).*\n\n#### **b. Output Resistance ($R_{\\text{out}}$)**\n$$R_{\\text{out}} = r_{O1} \\parallel R_L = r_{O1} \\parallel r_{O2} \\parallel \\frac{1}{g_{m2}} \\approx \\frac{1}{g_{m2}}$$\n\n#### **c. Small-Signal Voltage Gain ($A_v$)**\nThe overall voltage gain is:\n$$A_v = -g_{m1} R_{\\text{out}} = -g_{m1} \\left( \\frac{1}{g_{m2}} \\parallel r_{O1} \\parallel r_{O2} \\right)$$\n\nNeglecting channel-length modulation ($r_{O1}, r_{O2} \\gg 1/g_{m2}$):\n$$A_v \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\nSubstituting $g_m = \\sqrt{2\\mu C_{ox}(W/L)I_D}$:\n$$A_v \\approx -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n---\n\n### 4. Advantages of PMOS Diode Load vs. NMOS Diode Load\n\n1. **No Body Effect:** In standard N-well CMOS processes, each PMOS transistor can be placed in its own N-well tied to $V_{DD}$ (its source). Thus, $V_{SB2} = 0$, completely eliminating the threshold modulation ($g_{mb2} = 0$) and preserving high linearity. (An NMOS diode load sharing a common p-substrate suffers from body effect, which degrades gain and introduces non-linearity).\n2. **Linear Gain:** The gain is determined purely by the ratio of physical device dimensions ($(W/L)_1 / (W/L)_2$) and mobilities, making it relatively stable over process, voltage, and temperature (PVT).\n\n---\n\n### 5. Performance Limitations\n\n* **Low Voltage Gain:** Because the gain depends on the square root of the aspect ratios ($\\sqrt{(W/L)_1 / (W/L)_2}$), achieving a high voltage gain requires an impractically large ratio of transistor sizes.\n* **Reduced Output Voltage Swing:** \n  * Maximum output: $V_{\\text{out,max}} = V_{DD} - |V_{TH2}|$ (loses a threshold voltage of headroom).\n  * Minimum output: $V_{\\text{out,min}} = V_{DS1,\\text{sat}} = V_{\\text{in}} - V_{TH1}$ (to keep $M_1$ in saturation).\n* **Wide Bandwidth:** Because the output impedance is relatively low ($\\sim 1/g_{m2}$), the dominant pole at the output node is located at a high frequency ($\\omega_p \\approx g_{m2}/C_L$), offering a wide bandwidth at the expense of gain.",
        "format": "markdown",
        "sha256": "39623abd81f61bbea1be97fc37a545490fed117d775f003f25ed2d013a77906b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation treated consistently for both devices, as required for full credit.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 4414,
        "total_tokens": 5515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2848,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 4414,
        "total_tokens": 5515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2848,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **PMOS Common-Source (CS) amplifier with a diode-connected PMOS load**. \n\n---\n\n### 1. Circuit Identification and Operating Principle\n\n* **Driver Transistor ($M_2$):** \n  * A PMOS transistor whose source is connected to $V_{DD}$, gate receives the input signal $V_{\\text{in}}$, and drain is connected to the output node $V_{\\text{out}}$.\n  * Operates as the common-source amplifying device.\n* **Load Transistor ($M_1$):** \n  * A PMOS transistor with its source connected to $V_{\\text{out}}$, and both its gate and drain tied to ground ($0\\text{ V}$).\n  * Since $V_{G1} = V_{D1} = 0$, we have $V_{GD1} = 0$. For a PMOS transistor, the saturation condition is:\n    $$V_{SD} \\ge V_{SG} - |V_{THP}| \\implies V_{DG} \\le |V_{THP}|$$\n    Since $V_{DG1} = 0 \\le |V_{TH1}|$, **$M_1$ is guaranteed to operate in saturation whenever it conducts current**. It acts as a diode-connected active load.\n\n---\n\n### 2. Large-Signal (DC) Transfer Characteristics\n\nAssuming both transistors follow the square-law model:\n$$I_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)(V_{SG} - |V_{THP}|)^2$$\n\nAs the input voltage $V_{\\text{in}}$ decreases from $V_{DD}$ to $0$:\n\n#### **Region I: Cutoff ($V_{\\text{in}} > V_{DD} - |V_{TH2}|$)**\n* $V_{SG2} = V_{DD} - V_{\\text{in}} < |V_{TH2}|$, so $M_2$ is **OFF** ($I_{D2} = 0$).\n* With no current flowing through $M_1$, $V_{\\text{out}}$ discharges towards ground.\n* Conduction ceases when $V_{SG1} = V_{\\text{out}} \\le |V_{TH1}|$. Thus:\n  $$V_{\\text{out}} \\approx |V_{TH1}|$$\n  *(In the presence of subthreshold leakage, $V_{\\text{out}}$ may slowly drop toward $0\\text{ V}$).*\n\n#### **Region II: Both Transistors in Saturation (Linear Amplification Region)**\n* When $V_{\\text{in}} < V_{DD} - |V_{TH2}|$, $M_2$ turns **ON**.\n* As long as $V_{\\text{out}} \\le V_{\\text{in}} + |V_{TH2}|$, $M_2$ remains in saturation.\n* Equating the drain currents ($I_{D1} = I_{D2}$) neglecting channel-length modulation ($\\lambda = 0$) and body effect:\n  $$\\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{TH2}|)^2 = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{\\text{out}} - |V_{TH1}|)^2$$\n\n* Taking the square root on both sides:\n  $$V_{\\text{out}} = \\sqrt{\\frac{(W/L)_2}{(W/L)_1}} (V_{DD} - V_{\\text{in}} - |V_{TH2}|) + |V_{TH1}|$$\n\n* Notice that $V_{\\text{out}}$ is a **linear function** of $V_{\\text{in}}$, which provides good linearity over this range.\n\n#### **Region III: $M_2$ in Triode Region**\n* As $V_{\\text{in}}$ drops further, $V_{\\text{out}}$ rises until:\n  $$V_{SD2} < V_{SG2} - |V_{TH2}| \\implies V_{\\text{out}} > V_{\\text{in}} + |V_{TH2}|$$\n* $M_2$ enters the **triode (linear) region**, causing the gain to drop. As $V_{\\text{in}} \\to 0$, $V_{\\text{out}}$ approaches $V_{DD}$.\n\n---\n\n### 3. Small-Signal Analysis\n\n#### **A. Ideal Voltage Gain ($\\lambda = 0$, no body effect):**\nDifferentiating the large-signal equation with respect to $V_{\\text{in}}$:\n$$A_v = \\frac{\\partial V_{\\text{out}}}{\\partial V_{\\text{in}}} = - \\sqrt{\\frac{(W/L)_2}{(W/L)_1}} = -\\frac{g_{m2}}{g_{m1}}$$\n\n* The gain depends only on the **geometric aspect ratios** of the two transistors and is relatively independent of bias current and temperature.\n\n---\n\n#### **B. Voltage Gain with Body Effect:**\nIf the n-well (bulk) of $M_1$ is connected to $V_{DD}$ (standard shared n-well process), its source is at $V_{\\text{out}} \\le V_{DD}$, meaning $V_{BS1} = V_{DD} - V_{\\text{out}} \\ne 0$.\n* This introduces a back-gate transconductance $g_{mb1} = \\eta_1 g_{m1}$.\n* The small-signal load resistance becomes:\n  $$R_L \\approx \\frac{1}{g_{m1} + g_{mb1}} = \\frac{1}{g_{m1}(1 + \\eta_1)}$$\n* The voltage gain is reduced to:\n  $$A_v = -\\frac{g_{m2}}{g_{m1} + g_{mb1}} = -\\frac{1}{1 + \\eta_1}\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n*(Note: If $M_1$ is fabricated in a separate n-well with its bulk tied to its source $V_{\\text{out}}$, body effect is eliminated, $\\eta_1 = 0$).*\n\n---\n\n#### **C. Voltage Gain with Channel-Length Modulation ($\\lambda \\ne 0$):**\nTaking finite output resistances $r_{O1}$ and $r_{O2}$ into account:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{O1} \\parallel r_{O2} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n$$A_v = -g_{m2} \\left[ \\left(\\frac{1}{g_{m1} + g_{mb1}}\\right) \\parallel r_{O1} \\parallel r_{O2} \\right]$$\n\n---\n\n### 4. Input and Output Impedances\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  $$R_{\\text{in}} \\to \\infty \\quad \\text{(at low frequencies, looking into the gate of } M_2\\text{)}$$\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  $$R_{\\text{out}} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n  Because the load is diode-connected, $R_{\\text{out}}$ is relatively **low** compared to a common-source stage with a current-source load.\n\n---\n\n### 5. Summary of Key Pros and Cons\n\n| Feature | Characteristic |\n| :--- | :--- |\n| **Gain Linearity** | **High:** To first order, $A_v$ is independent of bias current and input signal amplitude. |\n| **Bandwidth** | **Wide:** The low output resistance ($\\approx 1/g_{m1}$) moves the output pole $\\omega_p \\approx (R_{\\text{out}} C_{\\text{out}})^{-1}$ to higher frequencies. |\n| **Gain Magnitude** | **Low to Moderate:** $A_v \\propto \\sqrt{(W/L)_2 / (W/L)_1}$; obtaining large gain requires impractical aspect ratio sizing. |\n| **Output Swing** | **Limited:** Output voltage is constrained between $|V_{TH1}|$ and $V_{DD} - |V_{OD2}|$. |",
        "format": "markdown",
        "sha256": "74b86079b1e2019d704171cfd8cdbadc982a4e48ae00c1c63e28fa1b03bf5c98"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain at ground. It gives the required gm/gm gain, Av ≈ −gm2/gm1.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 7071,
        "total_tokens": 8153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 7071,
        "total_tokens": 8153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **PMOS Common-Source (CS) Amplifier with a Diode-Connected PMOS Load**. \n\nBelow is a detailed analysis covering its topology, DC large-signal behavior, small-signal parameters, body effect, and key performance trade-offs.\n\n---\n\n### 1. Circuit Identification and Roles\n\n* **$M_2$ (Input Transistor):**\n  * **Type:** PMOS (the arrow on the source points toward the channel).\n  * **Configuration:** Common-source driver.\n  * **Connections:** \n    * Source $\\rightarrow V_{DD}$\n    * Gate $\\rightarrow V_{\\text{in}}$\n    * Drain $\\rightarrow V_{\\text{out}}$\n\n* **$M_1$ (Load Device):**\n  * **Type:** PMOS.\n  * **Configuration:** Diode-connected load.\n  * **Connections:** \n    * Source $\\rightarrow V_{\\text{out}}$\n    * Gate $\\rightarrow \\text{GND} \\, (0\\text{ V})$\n    * Drain $\\rightarrow \\text{GND} \\, (0\\text{ V})$\n  * Because the gate and drain are tied to the same potential ($\\text{GND}$), $V_{GD1} = 0$. Since $|V_{GD1}| = 0 < |V_{TH1}|$, $M_1$ is **always in saturation** whenever it is conducting ($V_{\\text{out}} > |V_{TH1}|$).\n\n---\n\n### 2. DC and Large-Signal Behavior\n\nAs the input voltage $V_{\\text{in}}$ sweeps from $V_{DD}$ down to $0$:\n\n#### A. Region I: $M_2$ is OFF ($V_{DD} - |V_{TH2}| < V_{\\text{in}} \\le V_{DD}$)\n* $V_{SG2} = V_{DD} - V_{\\text{in}} < |V_{TH2}|$, so $I_{D2} = 0$.\n* With no current supplied from $M_2$, $M_1$ discharges the output node until $V_{SG1} = V_{\\text{out}} = |V_{TH1}|$.\n* **Output:** $V_{\\text{out}} = |V_{TH1}|$ *(ideally; subthreshold leakage may slowly pull it closer to ground)*.\n\n#### B. Region II: Both $M_1$ and $M_2$ are in Saturation\n* As $V_{\\text{in}}$ drops below $V_{DD} - |V_{TH2}|$, $M_2$ turns on and operates in saturation.\n* Neglecting channel-length modulation ($\\lambda = 0$) and body effect:\n  $$I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{TH2}|)^2$$\n  $$I_{D1} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{out}} - |V_{TH1}|)^2$$\n\n* Since $I_{D1} = I_{D2}$:\n  $$\\sqrt{\\left(\\frac{W}{L}\\right)_1} (V_{\\text{out}} - |V_{TH1}|) = \\sqrt{\\left(\\frac{W}{L}\\right)_2} (V_{DD} - V_{\\text{in}} - |V_{TH2}|)$$\n\n* Solving for $V_{\\text{out}}$:\n  $$V_{\\text{out}} = \\sqrt{\\frac{(W/L)_2}{(W/L)_1}} \\left(V_{DD} - V_{\\text{in}} - |V_{TH2}|\\right) + |V_{TH1}|$$\n\n* Differentiating with respect to $V_{\\text{in}}$ yields a **constant large-signal gain**:\n  $$A_v = \\frac{\\partial V_{\\text{out}}}{\\partial V_{\\text{in}}} = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n  *(The circuit exhibits high linearity in this region because the gain depends only on device dimensions, not on bias currents or process parameters).*\n\n#### C. Region III: $M_2$ Enters the Triode Region\n* As $V_{\\text{in}}$ continues to drop, $V_{\\text{out}}$ rises. $M_2$ enters the triode region when:\n  $$|V_{DS2}| < |V_{GS2}| - |V_{TH2}| \\implies V_{DD} - V_{\\text{out}} < V_{DD} - V_{\\text{in}} - |V_{TH2}| \\implies V_{\\text{out}} > V_{\\text{in}} + |V_{TH2}|$$\n* In this region, the gain drops significantly, and $V_{\\text{out}}$ eventually approaches a maximum close to $V_{DD}$.\n\n---\n\n### 3. Small-Signal Analysis\n\n#### A. Transconductances and Resistances\n* **Input transistor ($M_2$):**\n  $$g_{m2} = \\sqrt{2\\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 I_D}, \\quad r_{o2} = \\frac{1}{\\lambda_2 I_D}$$\n\n* **Load transistor ($M_1$):**\n  Looking into the source of diode-connected $M_1$, the small-signal impedance is:\n  $$R_{out,1} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n#### B. Output Resistance ($R_{\\text{out}}$)\nThe overall small-signal output resistance is:\n$$R_{\\text{out}} = r_{o2} \\parallel r_{o1} \\parallel \\frac{1}{g_{m1} + g_{mb1}} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n#### C. Small-Signal Voltage Gain ($A_v$)\n$$A_v = -g_{m2} R_{\\text{out}} = -\\frac{g_{m2}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}$$\n\n* **Neglecting channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$):**\n  $$A_v \\approx -\\frac{g_{m2}}{g_{m1} + g_{mb1}} = -\\frac{g_{m2}}{g_{m1}(1 + \\eta)} = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}} \\frac{1}{1 + \\eta}$$\n  where $\\eta = \\frac{g_{mb1}}{g_{m1}} = \\frac{\\gamma}{2\\sqrt{2\\Phi_F + V_{SB1}}}$.\n\n---\n\n### 4. Body Effect (Substrate Sensitivity)\n\nIn an n-well CMOS process:\n* **For $M_2$:** The source is at $V_{DD}$, so its n-well can be tied directly to $V_{DD}$ ($V_{SB2} = 0 \\implies \\eta_2 = 0$).\n* **For $M_1$:** \n  * If $M_1$ shares a common n-well tied to $V_{DD}$, its source is at $V_{\\text{out}} \\le V_{DD}$. Thus, $V_{BS1} = V_{DD} - V_{\\text{out}} > 0$ (reverse-biased), which induces a **body effect** ($g_{mb1} > 0$). This reduces the gain and introduces non-linearity.\n  * If $M_1$ is placed in its own dedicated deep n-well tied to its source ($V_{\\text{out}}$), then $V_{SB1} = 0$, completely eliminating the body effect ($g_{mb1} = 0$):\n    $$A_v = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n---\n\n### 5. Summary of Key Characteristics\n\n| Parameter | Expression / Value | Notes |\n| :--- | :--- | :--- |\n| **Gain ($A_v$)** | $-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}} \\frac{1}{1+\\eta}$ | Relatively low; limited by the square-root dependence on aspect ratios. |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m1} + g_{mb1}}$ | Low impedance (fast discharge, wide bandwidth). |\n| **Output Voltage Swing** | $|V_{TH1}| \\le V_{\\text{out}} \\le V_{\\text{in}} + |V_{TH2}|$ | Restricted dynamic range at both ends. |\n| **Linearity** | High (if body effect is eliminated) | First-order cancellation of current and mobility terms. |",
        "format": "markdown",
        "sha256": "66287a356a44b08d94a4379b82c249a41dbd2e56eece9eb22680a5689ce2961f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain grounded. It gives the expected gm/gm gain, including the optional body-effect refinement; the extra large-signal discussion does not displace the essential interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 8908,
        "total_tokens": 9990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6857,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 8908,
        "total_tokens": 9990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6857,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Topology & Identification\n\n* **Transistor Types:** Both $M_1$ and $M_2$ are **PMOS transistors** (indicated by the arrows on the source terminals pointing inward toward the channel, following standard analog IC conventions such as Razavi's).\n* **Circuit Configuration:** **PMOS Common-Source (CS) Amplifier with a Diode-Connected PMOS Load**.\n  * **Input Device ($M_2$):** \n    * **Gate:** Connected to the input voltage $V_{\\text{in}}$.\n    * **Source:** Connected to the positive supply rail $V_{DD}$.\n    * **Drain:** Connected to the output node $V_{\\text{out}}$.\n  * **Load Device ($M_1$):**\n    * **Source:** Connected to the output node $V_{\\text{out}}$.\n    * **Gate:** Connected to Ground ($0\\text{ V}$).\n    * **Drain:** Connected to Ground ($0\\text{ V}$).\n    * Since the gate and drain are tied to the same potential (Ground), $M_1$ is **diode-connected** and acts as an active resistive load.\n\n---\n\n### 2. Large-Signal Operation & Transfer Characteristics\n\nLet the PMOS threshold voltages be denoted as $|V_{TH1}|$ and $|V_{TH2}|$.\n\n#### Operating Regions as $V_{\\text{in}}$ Varies from $V_{DD}$ to $0$:\n\n1. **Cutoff Region ($V_{\\text{in}} > V_{DD} - |V_{TH2}|$):**\n   * The source-to-gate voltage of $M_2$ is $V_{SG2} = V_{DD} - V_{\\text{in}} < |V_{TH2}|$, so $M_2$ is **OFF** ($I_{D2} = 0$).\n   * Consequently, $I_{D1} = 0$. \n   * For $M_1$, $V_{SG1} = V_{\\text{out}} - 0 = V_{\\text{out}}$. For zero current, the output settles at:\n     $$V_{\\text{out}} \\approx |V_{TH1}|$$\n\n2. **Saturation Region ($M_2$ Saturation, $M_1$ Saturation):**\n   * As $V_{\\text{in}}$ drops below $V_{DD} - |V_{TH2}|$, $M_2$ turns **ON** and operates in saturation (as long as $V_{SD2} \\ge V_{SG2} - |V_{TH2}| \\implies V_{\\text{out}} \\le V_{\\text{in}} + |V_{TH2}|$).\n   * Since $M_1$ is diode-connected ($V_{SD1} = V_{SG1} = V_{\\text{out}} > V_{\\text{out}} - |V_{TH1}|$), $M_1$ is **always in saturation** when conducting.\n   * Equating the drain currents ($I_{D1} = I_{D2}$) neglecting channel-length modulation ($\\lambda = 0$):\n     $$\\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{TH2}|)^2 = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{\\text{out}} - |V_{TH1}|)^2$$\n   * Solving for $V_{\\text{out}}$:\n     $$V_{\\text{out}} = \\sqrt{\\frac{(W/L)_2}{(W/L)_1}} \\left(V_{DD} - V_{\\text{in}} - |V_{TH2}|\\right) + |V_{TH1}|$$\n   * This provides a **linear relationship** between $V_{\\text{in}}$ and $V_{\\text{out}}$ in this region.\n\n3. **Triode Region ($M_2$ in Triode):**\n   * As $V_{\\text{in}}$ decreases toward $0\\text{ V}$, $V_{\\text{out}}$ increases until $V_{DD} - V_{\\text{out}} < V_{DD} - V_{\\text{in}} - |V_{TH2}|$, driving $M_2$ into the **triode (linear) region**.\n   * The maximum output voltage approaches $V_{DD}$ but is slightly lower depending on the sizing ratio of $M_2$ and $M_1$.\n\n---\n\n### 3. Small-Signal Analysis\n\n#### A. Small-Signal Parameters:\n* **Transconductances:**\n  $$g_{m1} = \\sqrt{2\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 I_D}, \\quad g_{m2} = \\sqrt{2\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 I_D}$$\n* **Impedance looking into the load ($M_1$):**\n  * Looking into the source of diode-connected $M_1$ (with gate and drain grounded):\n    $$R_{\\text{load}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{O1}$$\n\n#### B. Voltage Gain ($A_v$):\nApplying KCL at the output node:\n$$g_{m2} v_{\\text{in}} + v_{\\text{out}}\\left( \\frac{1}{r_{O2}} + \\frac{1}{r_{O1}} + g_{m1} + g_{mb1} \\right) = 0$$\n\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -\\frac{g_{m2}}{g_{m1} + g_{mb1} + \\frac{1}{r_{O1}} + \\frac{1}{r_{O2}}}$$\n\n* **Neglecting channel-length modulation ($r_{O1}, r_{O2} \\to \\infty$):**\n  $$A_v \\approx -\\frac{g_{m2}}{g_{m1} + g_{mb1}} = -\\frac{g_{m2}}{g_{m1}(1 + \\eta)}$$\n  *(where $\\eta = g_{mb1} / g_{m1}$ is the body effect parameter).*\n\n* **Neglecting body effect ($\\eta = 0$):**\n  $$A_v \\approx -\\frac{g_{m2}}{g_{m1}} = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n#### C. Input and Output Resistances:\n* **Input Resistance:**\n  $$R_{\\text{in}} = \\infty \\quad \\text{(at low frequencies, looking into the gate of } M_2\\text{)}$$\n* **Output Resistance:**\n  $$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{O1} \\parallel r_{O2} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n---\n\n### 4. Body Effect Considerations\n\nIn an n-well CMOS process:\n* **For $M_2$:** The source is connected to $V_{DD}$. The n-well is tied to $V_{DD}$, so $V_{SB2} = 0$, meaning **$M_2$ experiences no body effect**.\n* **For $M_1$:**\n  * **Shared n-well (tied to $V_{DD}$):** Since the source of $M_1$ is at $V_{\\text{out}} \\ne V_{DD}$, $V_{SB1} \\ne 0$. Transistor $M_1$ **experiences the body effect**, which introduces $g_{mb1}$ and reduces the overall gain by a factor of $(1 + \\eta)$.\n  * **Dedicated n-well (tied to source $V_{\\text{out}}$):** If layout permits, tying the well of $M_1$ to its source eliminates the body effect ($g_{mb1} = 0$), restoring the ideal gain of $-\\sqrt{(W/L)_2 / (W/L)_1}$.\n\n---\n\n### 5. Summary of Circuit Features\n\n| Parameter | Expression (Ideal) | Notes |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$ | Independent of bias current and supply voltage to first order. |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m1}}$ | Relatively low output impedance; yields wider bandwidth. |\n| **Output Swing** | $|V_{TH1}| \\le V_{\\text{out}} \\le V_{DD} - |V_{OD2}|$ | Limited swing compared to resistive or current-source loads. |",
        "format": "markdown",
        "sha256": "4b35c5cf0f334bccd9bb381735c39c7ac102233916fd340b121bf815cae36c5a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain at ground. It gives the required gm/gm gain, Av ≈ −gm2/gm1; ancillary details do not contradict the essential analysis.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 8621,
        "total_tokens": 9703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6628,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 8621,
        "total_tokens": 9703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6628,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{\\text{out}}$, we perform a small-signal analysis of the PMOS cascode structure.\n\n---\n\n### 1. Circuit Identification\n* **Transistors:** Both $M_1$ and $M_2$ are PMOS transistors (indicated by the arrows pointing into the channel at the source terminals).\n* **Bias:** The gates of $M_1$ and $M_2$ are tied to constant DC bias voltages ($V_{b1}$ and $V_{b2}$), which act as AC grounds in small-signal analysis.\n* **$V_{DD}$:** Also acts as an AC ground.\n* **Configuration:** \n  * Transistor $M_2$ has its source at $V_{DD}$ (AC ground) and its drain connected to node $X$.\n  * Transistor $M_1$ acts as a cascode transistor whose source is connected to node $X$ and drain is the output node.\n\n---\n\n### 2. Resistance at Node $X$ Looking into $M_2$\nLooking up into the drain of $M_2$:\n* Gate voltage: $v_{g2} = 0$\n* Source voltage: $v_{s2} = 0$\n* Thus, $v_{gs2} = 0$ and the dependent current source $g_{m2}v_{gs2} = 0$.\n\nThe impedance looking into the drain of $M_2$ to AC ground is simply its channel resistance:\n$$R_X = r_{O2}$$\n\n---\n\n### 3. Output Resistance $R_{\\text{out}}$ Looking into the Drain of $M_1$\nTransistor $M_1$ acts as a common-gate stage degenerated by the source resistance $R_X = r_{O2}$.\n\nTo find $R_{\\text{out}}$, apply a test voltage $V_t$ at the output node (drain of $M_1$) that draws a test current $I_t$:\n1. The current $I_t$ entering the drain must flow through $M_1$ and then through $M_2$ to ground, establishing a voltage at node $X$:\n   $$v_X = I_t \\cdot r_{O2}$$\n\n2. The small-signal gate-to-source and bulk-to-source voltages of $M_1$ are:\n   * $v_{gs1} = v_{g1} - v_{s1} = 0 - v_X = -I_t r_{O2}$\n   * Assuming the bulk (n-well) of $M_1$ is tied to $V_{DD}$ (AC ground):\n     $$v_{bs1} = v_{b1} - v_{s1} = 0 - v_X = -I_t r_{O2}$$\n\n3. Applying Kirchhoff's Current Law (KCL) through the channel of $M_1$:\n   $$I_t = \\frac{V_t - v_X}{r_{O1}} - g_{m1}v_{s1} - g_{mb1}v_{s1} = \\frac{V_t - v_X}{r_{O1}} - (g_{m1} + g_{mb1})v_X$$\n\n4. Substitute $v_X = I_t r_{O2}$:\n   $$I_t = \\frac{V_t - I_t r_{O2}}{r_{O1}} - (g_{m1} + g_{mb1}) I_t r_{O2}$$\n\n5. Rearranging terms:\n   $$I_t r_{O1} = V_t - I_t r_{O2} - (g_{m1} + g_{mb1}) r_{O1} r_{O2} I_t$$\n   $$V_t = I_t \\left[ r_{O1} + r_{O2} + (g_{m1} + g_{mb1}) r_{O1} r_{O2} \\right]$$\n\n---\n\n### Final Result\n\n#### 1. Exact Expression (with body effect):\n$$R_{\\text{out}} = [1 + (g_{m1} + g_{mb1})r_{O1}]r_{O2} + r_{O1}$$\n$$\\text{or}\\quad R_{\\text{out}} = r_{O1} + r_{O2} + (g_{m1} + g_{mb1})r_{O1}r_{O2}$$\n\n#### 2. If Body Effect is Neglected ($g_{mb1} = 0$):\n$$R_{\\text{out}} = (1 + g_{m1}r_{O1})r_{O2} + r_{O1}$$\n\n#### 3. Common Approximation (since $(g_{m1}r_{O1}) \\gg 1$):\n$$R_{\\text{out}} \\approx (g_{m1} + g_{mb1})r_{O1}r_{O2} \\approx g_{m1}r_{O1}r_{O2}$$",
        "format": "markdown",
        "sha256": "3056e4d753babe002842e903ac8183bc07252a75b9cb501259ed302ef71eb3fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M1 as the cascode device, and gives the full Rout expression and the appropriate approximation. Body effect is handled consistently.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 7186,
        "total_tokens": 8295,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6051,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 7186,
        "total_tokens": 8295,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6051,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{\\text{out}}$ looking into the drain of transistor $M_1$, we analyze the small-signal equivalent of this **PMOS cascode** structure.\n\n---\n\n### **1. Identify the Roles of the Transistors**\n* **$M_2$ (Current Source Transistor):**\n  * Source is connected to $V_{DD}$ (AC ground).\n  * Gate is connected to a DC bias $V_{b2}$ (AC ground).\n  * The small-signal resistance looking into the drain of $M_2$ (at node $X$) is simply its output impedance:\n    $$R_X = r_{O2}$$\n\n* **$M_1$ (Cascode Transistor):**\n  * Gate is connected to a DC bias $V_{b1}$ (AC ground).\n  * Source is connected to node $X$, so it is degenerated by the resistance $R_S = R_X = r_{O2}$.\n  * Drain is connected to the output terminal.\n\n---\n\n### **2. Output Resistance Calculation**\n\nUsing the standard formula for the output impedance of a transistor with source degeneration $R_S$:\n$$R_{\\text{out}} = r_{O1} + R_S + (g_{m1} + g_{mb1}) r_{O1} R_S$$\n\nSubstituting $R_S = r_{O2}$:\n\n$$R_{\\text{out}} = \\left[1 + (g_{m1} + g_{mb1})r_{O1}\\right] r_{O2} + r_{O1}$$\n\n---\n\n### **3. Simplified Forms**\n\n* **If body effect is neglected ($g_{mb1} = 0$, or if the bulk of $M_1$ is tied to its source):**\n  $$R_{\\text{out}} = (1 + g_{m1} r_{O1}) r_{O2} + r_{O1}$$\n\n* **Approximation (since $(g_{m1} + g_{mb1})r_{O1} \\gg 1$):**\n  $$R_{\\text{out}} \\approx (g_{m1} + g_{mb1}) r_{O1} r_{O2} \\approx g_{m1} r_{O1} r_{O2}$$",
        "format": "markdown",
        "sha256": "5839e0d6145308321381bf83a5f5e68b6f58a5ee3a104d38b10a794dc53e58e8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the PMOS cascode device and gives the full output-resistance expression and the correct gm1-based approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 5411,
        "total_tokens": 6520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4897,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 5411,
        "total_tokens": 6520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4897,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{\\text{out}}$, we recognize that this circuit is a **PMOS cascode current source**, where:\n* Transistor $M_2$ acts as a current source.\n* Transistor $M_1$ acts as the cascode transistor.\n* Node $X$ connects the drain of $M_2$ to the source of $M_1$.\n\n---\n\n### Step 1: Resistance Looking into Node $X$ ($R_X$)\nFor transistor $M_2$:\n* The source is tied to $V_{DD}$ (AC ground).\n* The gate is tied to a constant bias voltage $V_{b2}$ (AC ground).\n* Looking into the drain of $M_2$, the small-signal resistance is simply its output resistance:\n$$R_X = r_{O2}$$\n\n---\n\n### Step 2: Small-Signal Analysis for $M_1$\nTransistor $M_1$ is degenerated at its source by the resistance $R_X = r_{O2}$:\n* Gate voltage: $v_{g1} = 0$ (AC ground)\n* Source voltage: $v_{s1} = v_X$\n* Drain voltage: test voltage $V_t$\n* Test current entering the drain: $I_t$\n\nSince no current flows into the gate of $M_1$, the entire current $I_t$ flows through the source into node $X$, giving:\n$$v_X = I_t \\cdot r_{O2}$$\n\nThe gate-to-source and bulk-to-source voltages of $M_1$ are:\n$$v_{gs1} = v_{g1} - v_{s1} = -v_X$$\n$$v_{bs1} = v_{b1} - v_{s1} = -v_X \\quad \\text{(assuming bulk is tied to } V_{DD}\\text{)}$$\n\nUsing KCL at the drain of $M_1$:\n$$I_t = g_{m1} v_{gs1} + g_{mb1} v_{bs1} + \\frac{V_t - v_X}{r_{O1}}$$\n\nSubstitute $v_{gs1} = -v_X$ and $v_{bs1} = -v_X$:\n$$I_t = -(g_{m1} + g_{mb1}) v_X + \\frac{V_t - v_X}{r_{O1}}$$\n\nMultiply through by $r_{O1}$:\n$$r_{O1} I_t + (g_{m1} + g_{mb1}) r_{O1} v_X + v_X = V_t$$\n\nSubstitute $v_X = I_t r_{O2}$:\n$$V_t = I_t \\left[ r_{O1} + r_{O2} + (g_{m1} + g_{mb1}) r_{O1} r_{O2} \\right]$$\n\n---\n\n### Final Expressions for $R_{\\text{out}}$\n\n1. **Exact Expression (with body effect):**\n   $$R_{\\text{out}} = \\frac{V_t}{I_t} = r_{O1} + r_{O2} + (g_{m1} + g_{mb1}) r_{O1} r_{O2}$$\n   or equivalently:\n   $$R_{\\text{out}} = [1 + (g_{m1} + g_{mb1}) r_{O1}] r_{O2} + r_{O1}$$\n\n2. **If body effect is neglected ($g_{mb1} = 0$, e.g., bulk tied to source):**\n   $$R_{\\text{out}} = r_{O1} + r_{O2} + g_{m1} r_{O1} r_{O2} = (1 + g_{m1} r_{O1}) r_{O2} + r_{O1}$$\n\n3. **Common Approximation (since $(g_{m1} + g_{mb1}) r_{O1} \\gg 1$):**\n   $$R_{\\text{out}} \\approx (g_{m1} + g_{mb1}) r_{O1} r_{O2} \\approx g_{m1} r_{O1} r_{O2}$$",
        "format": "markdown",
        "sha256": "6d138dc1d404430ec2221a6ff687059d049c9bb5fe8639dcb9a0a6ce9deeb03b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the cascode device and gives the full Rout expression and its standard approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 5270,
        "total_tokens": 6379,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4305,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 5270,
        "total_tokens": 6379,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4305,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram, **$M_1$** and **$M_2$** are **PMOS transistors** forming a cascode current source:\n- $M_2$ is the main current source transistor.\n- $M_1$ is the cascode transistor.\n- Node $X$ is the drain of $M_2$ and the source of $M_1$.\n\n---\n\n### 1. Condition on Node Voltage $V_X$\n\nFor a PMOS transistor ($M_2$) to operate in the **saturation region**, the source-to-drain voltage must satisfy:\n\n$$V_{SD2} \\ge V_{SG2} - |V_{TH2}|$$\n\nSince the source is connected to $V_{DD}$ ($V_{S2} = V_{DD}$), the gate is at $V_{b2}$ ($V_{G2} = V_{b2}$), and the drain is at node $X$ ($V_{D2} = V_X$):\n\n$$V_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TH2}|$$\n\nSimplifying this gives:\n\n$$V_X \\le V_{b2} + |V_{TH2}|$$\n\nAlternatively, in terms of the overdrive voltage $|V_{ov2}| = V_{SG2} - |V_{TH2}|$:\n$$V_{SD2} \\ge |V_{ov2}| \\implies V_X \\le V_{DD} - |V_{ov2}|$$\n\n---\n\n### 2. Condition on Bias Voltages ($V_{b1}$ and $V_{b2}$)\n\nThe voltage at node $X$ is determined by the gate bias of $M_1$ ($V_{b1}$) and its source-to-gate voltage ($V_{SG1}$):\n\n$$V_X = V_{b1} + V_{SG1} = V_{b1} + |V_{TH1}| + |V_{ov1}|$$\n\nSubstituting $V_X$ into the saturation condition $V_X \\le V_{b2} + |V_{TH2}|$:\n\n$$V_{b1} + |V_{TH1}| + |V_{ov1}| \\le V_{b2} + |V_{TH2}|$$\n\nAssuming the threshold voltages are approximately equal ($|V_{TH1}| \\approx |V_{TH2}|$):\n\n$$V_{b2} - V_{b1} \\ge |V_{ov1}|$$\n\nor equivalently:\n\n$$V_{b1} \\le V_{b2} - |V_{ov1}|$$\n\n---\n\n### Summary\nTo ensure $M_2$ stays in saturation:\n1. **At node $X$:** The voltage must be kept low enough: \n   $$V_X \\le V_{b2} + |V_{TH2}|$$\n2. **Via biasing:** The bias voltage $V_{b1}$ must be chosen such that:\n   $$V_{b1} \\le V_{b2} - |V_{ov1}|$$ \n   *(or precisely: $V_{b1} \\le V_{b2} + |V_{TH2}| - V_{SG1}$)*.",
        "format": "markdown",
        "sha256": "d78ae8db01fd17ff11f9e1e8945715719e80fc2c39dc4db0f47557640f73e778"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, and uses VX = Vb1 + VSG1 to derive the required bias condition on Vb1. The equal-threshold simplification is appropriately qualified.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 4379,
        "total_tokens": 5496,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 4379,
        "total_tokens": 5496,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram, **$M_1$** and **$M_2$** are **PMOS transistors** configured as a cascode current source:\n* Transistor **$M_2$** is the primary current source.\n* Transistor **$M_1$** is the cascode device.\n* Node **$X$** connects the drain of $M_2$ to the source of $M_1$.\n\nTo ensure that **$M_2$ operates in the saturation region**, the following conditions must be satisfied:\n\n---\n\n### 1. Fundamental Saturation Condition for PMOS $M_2$\n\nFor a PMOS transistor to be turned ON and in saturation:\n1. **Turn-on condition:** \n   $$V_{SG2} \\ge |V_{TH2}| \\implies V_{DD} - V_{b2} \\ge |V_{TH2}| \\implies V_{b2} \\le V_{DD} - |V_{TH2}|$$\n\n2. **Saturation condition:** \n   $$V_{SD2} \\ge V_{SG2} - |V_{TH2}| = |V_{ov2}|$$\n   where $|V_{ov2}|$ is the overdrive voltage of $M_2$.\n\n---\n\n### 2. Condition on Node Voltage $V_X$\n\nSubstituting the terminal voltages of $M_2$ ($V_{S2} = V_{DD}$, $V_{G2} = V_{b2}$, and $V_{D2} = V_X$):\n\n$$V_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TH2}|$$\n\nSimplifying this yields:\n$$-V_X \\ge -V_{b2} - |V_{TH2}|$$\n$$\\mathbf{V_X \\le V_{b2} + |V_{TH2}|}$$\n\nThus, to keep $M_2$ in saturation, the voltage at node $X$ must not rise above $V_{b2} + |V_{TH2}|$.\n\n---\n\n### 3. Condition in Terms of Bias Voltages ($V_{b1}$ and $V_{b2}$)\n\nThe voltage at node $X$ is determined by the source voltage of $M_1$:\n$$V_X = V_{b1} + V_{SG1}$$\n\nSubstituting $V_X$ into the saturation inequality:\n$$V_{b1} + V_{SG1} \\le V_{b2} + |V_{TH2}|$$\n\nRearranging for the bias voltages:\n$$\\mathbf{V_{b1} \\le V_{b2} + |V_{TH2}| - V_{SG1}}$$\nor equivalently:\n$$\\mathbf{V_{b2} - V_{b1} \\ge V_{SG1} - |V_{TH2}|}$$\n\nSince $V_{SG1} = |V_{TH1}| + |V_{ov1}|$, if we assume equal threshold voltages ($|V_{TH1}| \\approx |V_{TH2}|$):\n$$\\mathbf{V_{b2} - V_{b1} \\ge |V_{ov1}|}$$\n\n---\n\n### Summary\nTo ensure $M_2$ remains in saturation:\n1. **$V_X \\le V_{b2} + |V_{TH2}|$**\n2. In terms of design and biasing, choose **$V_{b1}$ sufficiently lower than $V_{b2}$** such that:\n   $$V_{b2} - V_{b1} \\ge |V_{ov1}|$$\n   *(where $|V_{ov1}| = V_{SG1} - |V_{TH1}|$ is the overdrive voltage of $M_1$)*.",
        "format": "markdown",
        "sha256": "87dad48e5707bbc58bebda66ef3a80cb6f4d1e3c8efa3eeaf3bd0b9ff64fc8e5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, and uses V_X = V_b1 + V_SG1 to derive the bias condition on V_b1, including the equal-threshold overdrive form.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 4044,
        "total_tokens": 5161,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 4044,
        "total_tokens": 5161,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the PMOS transistor **$M_2$** operates in the **saturation region**, we must satisfy the standard operating conditions for a PMOS device.\n\n---\n\n### 1. Basic Saturation Condition for $M_2$\n\nFor the PMOS transistor $M_2$:\n* **Source:** $V_{S2} = V_{DD}$\n* **Gate:** $V_{G2} = V_{b2}$\n* **Drain:** $V_{D2} = V_X$\n\n#### A. Device must be ON:\n$$V_{SG2} \\ge |V_{TH2}| \\implies V_{DD} - V_{b2} \\ge |V_{TH2}|$$\n$$\\mathbf{V_{b2} \\le V_{DD} - |V_{TH2}|}$$\n\n#### B. Pinch-off (Saturation) Condition:\n$$V_{SD2} \\ge V_{SD2,\\text{sat}} = V_{SG2} - |V_{TH2}|$$\n\nSubstituting the terminal voltages:\n$$(V_{DD} - V_X) \\ge (V_{DD} - V_{b2}) - |V_{TH2}|$$\n\nSimplifying:\n$$-V_X \\ge -V_{b2} - |V_{TH2}|$$\n$$\\mathbf{V_X \\le V_{b2} + |V_{TH2}|}$$\n\n*(Alternatively, in standard sign convention: $V_{D2} \\le V_{G2} - V_{TH2}$ where $V_{TH2} < 0$.)*\n\n---\n\n### 2. Relating $V_X$ to the Bias Voltage $V_{b1}$\n\nThe voltage at node $X$ is determined by the source potential of transistor $M_1$:\n$$V_X = V_{b1} + V_{SG1}$$\n\nWhere:\n$$V_{SG1} = |V_{TH1}| + |V_{ov1}|$$\n($|V_{ov1}| = V_{SG1} - |V_{TH1}|$ is the overdrive voltage of $M_1$).\n\n---\n\n### 3. Design Condition on the Bias Voltages\n\nSubstitute $V_X$ into the saturation condition $V_X \\le V_{b2} + |V_{TH2}|$:\n\n$$V_{b1} + V_{SG1} \\le V_{b2} + |V_{TH2}|$$\n\nRearranging in terms of the bias voltages:\n$$V_{b2} - V_{b1} \\ge V_{SG1} - |V_{TH2}|$$\n\nAssuming both transistors have approximately equal threshold voltages ($|V_{TH1}| \\approx |V_{TH2}| = |V_{TH}|$):\n$$V_{b2} - V_{b1} \\ge |V_{ov1}|$$\n$$\\text{or} \\quad \\mathbf{V_{b1} \\le V_{b2} - |V_{ov1}|}$$\n\n---\n\n### Summary\nTo keep $M_2$ in saturation:\n1. **$V_{b2} \\le V_{DD} - |V_{TH2}|$** (ensures $M_2$ turns on).\n2. **$V_X \\le V_{b2} + |V_{TH2}|$**, which translates to setting the bias voltage **$V_{b1}$ lower than $V_{b2}$ by at least the overdrive voltage of $M_1$** ($V_{b2} - V_{b1} \\ge |V_{ov1}|$).",
        "format": "markdown",
        "sha256": "b6582060c312481269735d0bcb2e36b461a84ec594da81cc458a36a62047af81"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, and uses VX = Vb1 + VSG1 to derive the bias condition. With equal thresholds, it correctly reduces to Vb2 − Vb1 being at least M1’s overdrive.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3767,
        "total_tokens": 4884,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3767,
        "total_tokens": 4884,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a standard **NMOS Cascode Amplifier** with an ideal current-source load ($I_1$). \n\nBelow is a detailed analysis covering its architecture, DC operation, small-signal behavior, advantages, and trade-offs.\n\n---\n\n### 1. Circuit Architecture & Component Roles\n\n* **$M_1$ (Input Transistor / Common-Source Stage):**\n  * Acts as a transconductance device, converting the input voltage $v_{\\text{in}}$ into a small-signal drain current: $i_{d1} \\approx g_{m1} v_{\\text{in}}$.\n* **$M_2$ (Cascode Transistor / Common-Gate Stage):**\n  * Biased at a constant DC gate voltage $V_{b1}$.\n  * Acts as a current buffer that routes the current from $M_1$ to the output node ($v_{\\text{out}}$) while shielding node $X$ from voltage fluctuations at $v_{\\text{out}}$.\n* **$I_1$ (Load):**\n  * An ideal DC current source providing the bias current $I_{D1} = I_{D2} = I_1$ and offering an infinite small-signal resistance ($r_{I1} \\to \\infty$).\n\n---\n\n### 2. DC Bias and Voltage Headroom (Output Swing)\n\nTo ensure high gain and proper linear amplification, both transistors must operate in the **saturation region**:\n$$V_{DS} \\ge V_{GS} - V_{TH} = V_{ov}$$\n\n1. **Condition for $M_1$ in saturation:**\n   $$V_X \\ge V_{ov1} = V_{GS1} - V_{TH1}$$\n\n2. **Condition for $M_2$ in saturation:**\n   $$V_{\\text{out}} - V_X \\ge V_{ov2} = V_{GS2} - V_{TH2}$$\n\n3. **Setting the Bias Voltage $V_{b1}$:**\n   $$V_X = V_{b1} - V_{GS2}$$\n   To maximize the output voltage swing, $V_X$ is typically set as low as possible without putting $M_1$ into the triode region:\n   $$V_{X,\\min} = V_{ov1} \\implies V_{b1} = V_{ov1} + V_{GS2} = V_{ov1} + V_{ov2} + V_{TH2}$$\n\n4. **Allowable Output Voltage Swing:**\n   * **Minimum Output Voltage:**\n     $$v_{\\text{out},\\min} = V_X + V_{ov2} = V_{ov1} + V_{ov2}$$\n   * **Maximum Output Voltage:**\n     Limited by the compliance voltage of the current source $I_1$ (if implemented with a PMOS transistor, $v_{\\text{out},\\max} = V_{DD} - |V_{ov,P}|$).\n\n---\n\n### 3. Small-Signal Analysis\n\n#### A. Output Resistance ($R_{\\text{out}}$)\nLooking down into the drain of $M_2$, the cascode configuration boosts the output impedance:\n$$R_{\\text{out}} \\approx \\left[1 + (g_{m2} + g_{mb2}) r_{o2}\\right] r_{o1} + r_{o2} \\approx (g_{m2} + g_{mb2}) r_{o2} r_{o1}$$\n\n* Where:\n  * $r_{o1}, r_{o2}$ are the channel-length modulation resistances of $M_1$ and $M_2$.\n  * $g_{mb2}$ is the body-effect transconductance of $M_2$ (since the source of $M_2$ at node $X$ is not at ground potential, $V_{SB2} > 0$).\n\n#### B. Overall Transconductance ($G_m$)\nBecause $M_2$ acts as a current buffer transferring almost all current from $M_1$ to the load:\n$$G_m \\approx g_{m1}$$\n\n#### C. Small-Signal Voltage Gain ($A_v$)\nAssuming an ideal current source load ($R_L \\to \\infty$):\n$$A_v = -G_m R_{\\text{out}} \\approx -g_{m1} \\left[ (g_{m2} + g_{mb2}) r_{o2} r_{o1} \\right]$$\n\n* **Key observation:** Compared to a simple Common-Source amplifier (where gain $\\approx -g_{m1} r_{o1}$), the cascode topology boosts the gain by a factor of roughly $(g_{m2} + g_{mb2}) r_{o2}$.\n\n---\n\n### 4. Key Advantages\n\n1. **Significantly Higher Voltage Gain:**\n   The output resistance is boosted by a factor of roughly $g_{m2}r_{o2}$, enabling very high intrinsic gain in a single stage.\n2. **Mitigation of the Miller Effect (Higher Bandwidth):**\n   * The impedance looking into the source of $M_2$ is relatively low (typically $\\sim 1/g_{m2}$).\n   * Consequently, the voltage gain from $v_{\\text{in}}$ to node $X$ is small ($\\approx -g_{m1}/g_{m2} \\approx -1$).\n   * This prevents Miller multiplication of the gate-drain capacitance $C_{gd1}$, greatly extending the amplifier's input bandwidth.\n3. **High Reverse Isolation:**\n   $M_2$ shields node $X$ and the input from large signal swings at $v_{\\text{out}}$, reducing unwanted feedback.\n\n---\n\n### 5. Trade-offs and Limitations\n\n1. **Reduced Voltage Headroom:**\n   The stacking of $M_2$ on top of $M_1$ consumes at least an additional overdrive voltage ($V_{ov2}$), reducing the available linear output voltage swing.\n2. **Body Effect on $M_2$:**\n   Since the bulk of $M_2$ is typically connected to ground while its source (node $X$) sits at a positive voltage, $V_{SB2} > 0$. This increases the threshold voltage $V_{TH2}$ via the body effect, requiring a higher $V_{b1}$ and slightly limiting the swing.",
        "format": "markdown",
        "sha256": "96bd78c1d5356a1a972dc08d1bef5f26f3e820c897aee5a81ce088111b94a968"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS, M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. The node-X swing explanation is inaccurate for an ideal current-source load, but the golden solution’s full-credit rule applies.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3376,
        "total_tokens": 4458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1980,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3376,
        "total_tokens": 4458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1980,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is an **NMOS Cascode Amplifier** with an ideal current-source load ($I_1$). \n\nIt consists of:\n* **$M_1$**: An NMOS transistor configured as a **common-source (CS)** stage, serving as the input transconductor.\n* **$M_2$**: An NMOS transistor configured as a **common-gate (CG)** stage, acting as a cascode device (current buffer/shield).\n* **$I_1$**: An ideal current source serving as an active load tied to the supply rail $V_{DD}$.\n* **$V_{b1}$**: A fixed DC bias voltage applied to the gate of $M_2$.\n\nBelow is a detailed analysis covering its DC biasing/swing, small-signal parameters, frequency response benefits, and design trade-offs.\n\n---\n\n### 1. DC Operating Conditions and Voltage Swing\n\nFor proper linear amplification, both transistors $M_1$ and $M_2$ must remain in the **saturation region**:\n$$V_{DS} \\ge V_{GS} - V_{TH} = V_{ov}$$\n\n1. **Node $X$ Voltage ($V_X$):**\n   * The voltage at node $X$ is determined by the gate voltage of $M_2$:\n     $$V_X = V_{b1} - V_{GS2}$$\n   * To keep $M_1$ in saturation:\n     $$V_X \\ge V_{ov1} \\implies V_{b1} - V_{GS2} \\ge V_{ov1} \\implies V_{b1} \\ge V_{ov1} + V_{GS2}$$\n\n2. **Output Voltage Headroom ($v_{\\text{out}}$):**\n   * **Minimum Output Voltage ($v_{\\text{out,min}}$):** \n     To keep $M_2$ in saturation:\n     $$v_{\\text{out}} - V_X \\ge V_{ov2} \\implies v_{\\text{out,min}} = V_X + V_{ov2} = V_{ov1} + V_{ov2}$$\n   * **Maximum Output Voltage ($v_{\\text{out,max}}$):**\n     Since the load is modeled as an ideal current source, theoretically $v_{\\text{out,max}} \\approx V_{DD}$. (In practical implementations where $I_1$ is realized by a PMOS cascode current mirror, $v_{\\text{out,max}} = V_{DD} - |V_{ov,\\text{load}}|$).\n   * **Output Swing Penalty:** \n     Stacking $M_2$ on top of $M_1$ consumes voltage headroom by at least one overdrive voltage ($V_{ov2}$), reducing the dynamic range at the output compared to a simple common-source stage.\n\n---\n\n### 2. Small-Signal Analysis\n\nLet:\n* $g_{m1}, g_{m2}$ = transconductances of $M_1$ and $M_2$\n* $r_{O1}, r_{O2}$ = channel-length modulation output resistances of $M_1$ and $M_2$\n* $g_{mb2}$ = body-effect transconductance of $M_2$ (since the substrate of $M_2$ is typically connected to ground, while its source is at $V_X > 0$).\n\n#### A. Overall Transconductance ($G_m$)\nThe effective short-circuit transconductance looking from the output to ground is dominated by the input transistor $M_1$:\n$$G_m \\approx g_{m1}$$\n\n#### B. Output Resistance ($R_{\\text{out}}$)\nThe cascode transistor $M_2$ boosts the output impedance looking into its drain by approximately its intrinsic gain:\n$$R_{\\text{out}} = r_{O1} + r_{O2} + (g_{m2} + g_{mb2}) r_{O1} r_{O2}$$\n\nSince $(g_{m2} + g_{mb2}) r_{O1} r_{O2} \\gg r_{O1} + r_{O2}$:\n$$R_{\\text{out}} \\approx (g_{m2} + g_{mb2}) r_{O2} r_{O1} \\approx g_{m2} r_{O2} r_{O1}$$\n\nBecause the current source $I_1$ is ideal ($R_{I1} = \\infty$), the total output resistance seen at the $v_{\\text{out}}$ node is:\n$$R_{\\text{total}} = R_{\\text{out}} \\approx (g_{m2} + g_{mb2}) r_{O2} r_{O1}$$\n\n#### C. Small-Signal Voltage Gain ($A_v$)\nThe open-circuit voltage gain is given by:\n$$A_v = -G_m R_{\\text{total}} \\approx -g_{m1} \\left[ (g_{m2} + g_{mb2}) r_{O2} r_{O1} \\right]$$\n\nNeglecting the body effect ($g_{mb2} \\approx 0$):\n$$A_v \\approx -g_{m1} g_{m2} r_{O1} r_{O2}$$\n\n> **Key Takeaway:** The cascode configuration achieves a voltage gain proportional to $(g_m r_O)^2$, which is significantly higher than that of a single-stage common-source amplifier ($A_v \\approx -g_m r_O$).\n\n---\n\n### 3. Frequency Response & The Miller Effect\n\nOne of the primary motivations for using a cascode topology is to improve **high-frequency performance**:\n\n1. **Suppression of Miller Effect:**\n   * In a simple CS stage, the gate-drain capacitance $C_{gd1}$ is multiplied by the large stage gain, severely limiting bandwidth.\n   * In this cascode amplifier, the gain from the input to node $X$ is low:\n     $$A_{v,X} = \\frac{v_X}{v_{\\text{in}}} \\approx -\\frac{g_{m1}}{g_{m2} + g_{mb2}} \\approx -1 \\quad (\\text{if } g_{m1} \\approx g_{m2})$$\n   * The effective Miller capacitance seen at the input is:\n     $$C_{\\text{in,Miller}} = C_{gd1} (1 - A_{v,X}) \\approx 2 C_{gd1}$$\n   * Because the voltage swing at node $X$ is very small, the Miller multiplication of $C_{gd1}$ is largely eliminated, resulting in a much higher input pole frequency and wider bandwidth.\n\n2. **Input-to-Output Isolation:**\n   * $M_2$ acts as a shield between the output node and the input node, minimizing reverse signal transmission and capacitive feedback.\n\n---\n\n### 4. Summary of Advantages and Disadvantages\n\n| **Advantages** | **Disadvantages** |\n| :--- | :--- |\n| **High Voltage Gain:** Boosted by roughly $g_{m2}r_{O2}$ relative to a standard CS stage. | **Reduced Output Voltage Swing:** Headroom is limited by the stacked overdrive voltages ($V_{ov1} + V_{ov2}$). |\n| **High Output Impedance:** Ideal for current-mode outputs and high-gain stages. | **Additional Noise:** $M_2$ adds thermal and flicker noise (though dominant only at very high frequencies). |\n| **Wide Bandwidth:** Miller multiplication of $C_{gd1}$ is suppressed. | **Higher Bias Complexity:** Requires an additional stable DC bias voltage ($V_{b1}$). |\n| **High Reverse Isolation:** Prevents output perturbations from coupling back to the input. | |",
        "format": "markdown",
        "sha256": "bf24108b027f6e2688d7097a1d23fcd5a13cf3c563ac04e0e735752103af2d0a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression required for full credit.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3560,
        "total_tokens": 4642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3560,
        "total_tokens": 4642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is an **NMOS Cascode Amplifier** with an ideal current-source load ($I_1$). \n\nIn this topology:\n* **$M_1$** acts as the input device configured as a **common-source (CS)** stage.\n* **$M_2$** acts as a **common-gate (CG)** cascode device biased with a constant DC voltage $V_{b1}$.\n* **$I_1$** provides the DC bias current and presents an infinite small-signal load resistance ($r_{load} = \\infty$).\n\n---\n\n### 1. Small-Signal Analysis\n\nLet the small-signal parameters of $M_1$ and $M_2$ be:\n* Transconductances: $g_{m1}, g_{m2}$\n* Body-effect transconductance of $M_2$: $g_{mb2}$ (since its source is at node $X \\neq 0$)\n* Output resistances (channel-length modulation): $r_{O1}, r_{O2}$\n\n#### A. Output Resistance ($R_{\\text{out}}$)\nThe cascode transistor $M_2$ dramatically increases the output impedance by degenerating its own source with the output resistance of $M_1$ ($r_{O1}$):\n\n$$R_{\\text{out}} = r_{O1} + r_{O2} + (g_{m2} + g_{mb2}) r_{O1} r_{O2}$$\n\nNeglecting body effect ($g_{mb2} \\approx 0$) and assuming $(g_{m2} r_{O2}) \\gg 1$:\n$$R_{\\text{out}} \\approx g_{m2} r_{O1} r_{O2}$$\n\nBecause $I_1$ is an ideal current source ($R_{I1} = \\infty$), the total small-signal output resistance seen at node $v_{\\text{out}}$ is simply:\n$$R_{\\text{out,total}} = R_{\\text{out}}$$\n\n#### B. Overall Transconductance ($G_m$)\nThe effective short-circuit transconductance of the cascode stage is:\n$$G_m \\approx g_{m1}$$\n\n#### C. Small-Signal Voltage Gain ($A_v$)\nThe open-circuit voltage gain is:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -G_m R_{\\text{out}}$$\n\nSubstituting $G_m$ and $R_{\\text{out}}$:\n$$A_v \\approx -g_{m1} \\left[ (g_{m2} + g_{mb2}) r_{O1} r_{O2} + r_{O1} + r_{O2} \\right]$$\n\nNeglecting body effect ($g_{mb2} = 0$):\n$$A_v \\approx -g_{m1} g_{m2} r_{O1} r_{O2}$$\n\n> **Key takeaway:** The voltage gain is boosted by a factor of approximately $(g_{m2} r_{O2})$ compared to a simple common-source amplifier, yielding an intrinsic gain on the order of $(g_m r_O)^2$.\n\n---\n\n### 2. Large-Signal / DC Headroom Analysis\n\nFor proper linear amplification, both transistors must remain in the **saturation region**:\n\n1. **For $M_1$ to be in saturation:**\n   $$V_{DS1} = V_X \\ge V_{GS1} - V_{TH1} = V_{OV1}$$\n\n2. **For $M_2$ to be in saturation:**\n   $$V_{DS2} = V_{\\text{out}} - V_X \\ge V_{GS2} - V_{TH2} = V_{OV2}$$\n\n3. **Node $X$ voltage:**\n   Node $X$ is held at a relatively constant DC potential set by $V_{b1}$:\n   $$V_X = V_{b1} - V_{GS2}$$\n   To keep $M_1$ in saturation:\n   $$V_{b1} \\ge V_{OV1} + V_{GS2} = V_{OV1} + V_{OV2} + V_{TH2}$$\n\n4. **Minimum Output Voltage ($V_{\\text{out,min}}$):**\n   $$V_{\\text{out,min}} = V_X + V_{OV2} = V_{OV1} + V_{OV2}$$\n\n> **Voltage Swing Limitation:** The available output swing is reduced by stacking two transistors, requiring at least $(V_{OV1} + V_{OV2})$ headroom above ground.\n\n---\n\n### 3. High-Frequency Performance (Reduction of Miller Effect)\n\n* **Voltage gain at intermediate node $X$:**\n  $$A_{v,X} = \\frac{v_X}{v_{\\text{in}}} \\approx -\\frac{g_{m1}}{g_{m2} + g_{mb2}} \\approx -1 \\quad (\\text{if } g_{m1} \\approx g_{m2})$$\n* Because $|A_{v,X}| \\approx 1$, the Miller multiplication of the gate-drain capacitance $C_{gd1}$ is drastically reduced:\n  $$C_{\\text{in,Miller}} = C_{gd1} (1 - A_{v,X}) \\approx 2 C_{gd1}$$\n  *(In a standard CS amplifier, this capacitance is multiplied by $(1 + |A_v|)$, which is very large).*\n\nConsequently, the cascode configuration **eliminates the dominant Miller pole** at the input, significantly increasing the amplifier's bandwidth.\n\n---\n\n### 4. Summary of Circuit Characteristics\n\n| Parameter | Standard CS Amplifier | Cascode Amplifier (this circuit) |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\sim -g_{m1} r_{O1}$ | $\\sim -g_{m1} g_{m2} r_{O1} r_{O2}$ (much higher) |\n| **Output Resistance ($R_{\\text{out}}$)** | $r_{O1}$ | $\\approx g_{m2} r_{O2} r_{O1}$ (much higher) |\n| **Bandwidth / Miller Effect** | Severe Miller multiplication | Miller effect strongly suppressed |\n| **Output Voltage Swing** | $V_{DD} - V_{OV1}$ | $V_{DD} - (V_{OV1} + V_{OV2})$ (reduced headroom) |\n| **Reverse Isolation** | Moderate | Excellent (node $X$ isolates output from input) |",
        "format": "markdown",
        "sha256": "38655eaab77fb4c3cf634a2132cf9049e7cc2285b9e081e9bde6a50a10e3283a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer identifies the NMOS common-source input and common-gate cascode, and gives the correct ideal-load gain. Its extra node-X/Miller discussion is inaccurate but does not change the required gain result.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3523,
        "total_tokens": 4605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2062,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3523,
        "total_tokens": 4605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2062,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, the circuit shown in the figure is not a cascode structure.**\n\n---\n\n### **Detailed Explanation**\n\n#### **1. Transistor Identification**\nIn standard textbook notation (such as in Behzad Razavi’s *Fundamentals of Microelectronics*):\n* An arrow on the source terminal pointing **outward** (away from the channel) designates an **NMOS** device.\n* An arrow on the source terminal pointing **inward** (toward the channel) designates a **PMOS** device.\n\nApplying this to the circuit:\n* **$M_2$ is an NMOS transistor:** \n  * The arrow on its bottom terminal points outward, identifying the bottom terminal as its **source** and the top terminal as its **drain**.\n  * The gate is biased at a constant DC voltage $V_{b1}$ (AC ground).\n  * Therefore, $M_2$ is configured as a **Common-Gate (CG)** stage.\n\n* **$M_1$ is a PMOS transistor:** \n  * The arrow on its top terminal points inward, identifying the top terminal as its **source** and the bottom terminal as its **drain**.\n  * The drain is connected to ground (small-signal ground), and the input signal $V_{\\text{in}}$ is applied to the gate.\n  * Therefore, $M_1$ is configured as a **Common-Drain (CD)** stage (also known as a source follower).\n\n---\n\n#### **2. Why It Is Not a Cascode**\n* **Definition of a Cascode:** A cascode amplifier is strictly defined as the cascade of a **Common-Source (CS)** (or Common-Emitter) transconductance stage followed by a **Common-Gate (CG)** (or Common-Base) current-buffering stage. In a true cascode, the input device converts $V_{\\text{in}}$ into a signal current at its **drain**, which is then injected into the source of the cascode device.\n* **This Circuit:** The input device $M_1$ operates as a **Common-Drain (CD)** amplifier whose **source** (not drain) drives the source of $M_2$. \n* Consequently, this topology is a **Common-Drain + Common-Gate (CD–CG)** cascade, not a cascode.\n\n---\n\n#### **3. Functional Differences from a Cascode**\n\n| Characteristic | True Cascode (CS–CG) | This Circuit (CD–CG) |\n| :--- | :--- | :--- |\n| **Stage 1 Configuration** | Common-Source (CS) | Common-Drain (CD) |\n| **Gain Polarity** | **Inverting** ($A_v < 0$) | **Non-inverting** ($A_v > 0$) |\n| **Voltage Gain ($A_v$)** | $\\approx -g_{m1} R_D$ | $\\approx +(g_{m1} \\parallel g_{m2}) R_D = \\frac{g_{m1}g_{m2}}{g_{m1} + g_{m2}} R_D$ |\n| **Output Resistance ($R_{\\text{out}}$)** | Boosted to $\\approx g_{m2} r_{O2} r_{O1}$ | Low impedance seen at source of $M_2$ ($\\approx 1/g_{m1}$), so $R_{\\text{out}} \\approx r_{O2}\\left(1 + \\frac{g_{m2}}{g_{m1}}\\right) \\sim r_{O2}$ (no impedance boost) |",
        "format": "markdown",
        "sha256": "d9022635e2b1f15bfa43d45b97dda75badb86417e4f8047b60b21cf702040793"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower and M2 as a common-gate NMOS, so the structure is CD–CG rather than a cascode and lacks the cascode resistance boost. The approximate output-resistance discussion is consistent with the golden solution.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 12720,
        "total_tokens": 13835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 12720,
        "total_tokens": 13835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the circuit shown is **not a cascode structure**.\n\n---\n\n### **Detailed Explanation:**\n\n1. **Identification of Transistors:**\n   * **$M_2$ (NMOS):** \n     * The arrow on the bottom terminal points outward (away from the channel), identifying $M_2$ as an **NMOS** transistor, with its source at the bottom and drain at the top.\n     * Since its gate is tied to a fixed DC bias voltage ($V_{b1}$, which is an AC ground), the input signal enters through its source, and the output is taken from its drain ($V_{\\text{out}}$), $M_2$ operates as a **common-gate (CG)** stage.\n\n   * **$M_1$ (PMOS):** \n     * The arrow on the top terminal points inward (toward the channel), identifying $M_1$ as a **PMOS** transistor. \n     * The terminal with the arrow is the **source**, meaning its source is connected to the source of $M_2$, and its **drain** is connected to ground (AC ground).\n     * With the input signal applied to the gate and the drain grounded, $M_1$ operates as a **common-drain (CD)** stage (source follower).\n\n2. **Why it is not a Cascode:**\n   * By definition, a **cascode amplifier** consists of a **common-source (CS)** stage followed by a **common-gate (CG)** stage (or common-emitter followed by common-base in BJTs).\n   * In this circuit, the input transistor $M_1$ is configured as a **common-drain (source follower)** stage, not a common-source stage. \n   * Therefore, this configuration is a **CD–CG (source-follower driving a common-gate stage)** cascade, not a cascode.",
        "format": "markdown",
        "sha256": "403255a9acecab5dff1df52b0a1488d4ee2cc67a96db78faa59411758c74f44b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2 as common-gate and M1 as a PMOS source follower with its drain grounded, so the circuit is not a common-source/common-gate cascode.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 5908,
        "total_tokens": 7023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5501,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 5908,
        "total_tokens": 7023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5501,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, the circuit shown in the figure is not a cascode structure.**\n\n---\n\n### Detailed Analysis and Explanation:\n\n#### 1. Transistor Identification\n* **$M_2$ is an NMOS transistor**: The arrow at its bottom terminal points **outward** (away from the channel), identifying that terminal as the **source**.\n* **$M_1$ is a PMOS transistor**: The arrow at its top terminal points **inward** (toward the channel), identifying that terminal as the **source**. The bottom terminal connected to ground is its **drain**.\n\n---\n\n#### 2. Amplifier Stage Configurations\n* **$M_1$ is a Common-Drain (CD) stage (Source Follower)**:\n  * Input is applied to the **gate** ($V_{\\text{in}}$).\n  * The **drain** is tied to ground (AC ground).\n  * The signal is taken from the **source** (the node between $M_1$ and $M_2$).\n  * A stage with input at the gate, drain at AC ground, and output at the source is a **source follower (common-drain)**, *not* a common-source amplifier.\n\n* **$M_2$ is a Common-Gate (CG) stage**:\n  * The gate is tied to a fixed DC bias voltage $V_{b1}$ (AC ground).\n  * Input is received at the **source** from $M_1$.\n  * Output is taken at the **drain** ($V_{\\text{out}}$).\n\nTherefore, this circuit is a **Common-Drain (CD) followed by a Common-Gate (CG)** amplifier (a CD–CG cascade), not a cascode.\n\n---\n\n#### 3. Why It Is Not a Cascode\nA true cascode amplifier consists of a **Common-Source (CS)** transconductance stage followed by a **Common-Gate (CG)** current buffer stage. \n\nThe circuit in the figure differs from a cascode in several fundamental ways:\n\n| Characteristic | Standard Cascode (CS–CG) | Circuit in Figure (CD–CG) |\n| :--- | :--- | :--- |\n| **Topology** | Common-Source + Common-Gate | Common-Drain + Common-Gate |\n| **Input Stage Function** | Voltage-to-current converter ($g_m$) | Voltage buffer (Source follower) |\n| **Gain Polarity** | **Inverting** ($A_v \\approx -g_{m1} R_D$) | **Non-inverting** ($A_v \\approx +\\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} R_D$) |\n| **Output Impedance** | **Boosted significantly**: $R_{\\text{out}} \\approx g_{m2} r_{o2} r_{o1}$ | **Not boosted**: looking into $M_1$'s source gives a low impedance ($1/g_{m1}$), so $R_{\\text{out}} \\approx r_{o2}(1 + g_{m2}/g_{m1}) \\sim \\mathcal{O}(r_{o2})$ |\n\nBecause it lacks the transconductance input stage and the characteristic output impedance boosting, it is **not** a cascode structure.",
        "format": "markdown",
        "sha256": "a6d1511ec065dfe3a40875431193e1e1642e17f60bb7cee64d5aa96c639ba3e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower with its drain grounded and M2 as common-gate, so the circuit is not a cascode and lacks the cascode resistance boost. Its output-resistance discussion is consistent with the golden solution.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 11148,
        "total_tokens": 12263,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 11148,
        "total_tokens": 12263,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is significantly less pronounced in a cascode amplifier because **the cascode configuration drastically reduces the voltage gain across the input transistor’s feedback capacitance.** \n\nTo understand why this happens, let’s break down the mechanics of the Miller effect and see how the cascode architecture eliminates it.\n\n---\n\n### 1. The Problem: The Miller Effect in a Standard Amplifier\nIn a standard Common-Source (CS) or Common-Emitter (CE) amplifier:\n* A parasitic capacitance ($C_{gd}$ in MOSFETs, $C_{\\mu}$ in BJTs) connects the input (Gate) to the output (Drain).\n* The voltage gain between the input and the drain is large and negative: $A_v = -g_m R_L$.\n* According to **Miller’s Theorem**, the effective input capacitance caused by this feedback capacitor is multiplied by the gain:\n  $$C_{\\text{in, Miller}} = C_{gd} (1 - A_v) = C_{gd} (1 + |A_v|)$$\n\nBecause $|A_v|$ is typically large (e.g., 50 to 100+), the input capacitance balloons. This large capacitance forms a low-pass filter with the source resistance, severely degrading the amplifier's high-frequency bandwidth.\n\n---\n\n### 2. The Solution: The Cascode Architecture\nA cascode amplifier stacks two transistors:\n1. **$M_1$ (Input stage):** A Common-Source (or Common-Emitter) transistor.\n2. **$M_2$ (Cascode stage):** A Common-Gate (or Common-Base) transistor placed directly on top of $M_1$.\n\nThe input signal is applied to the gate of $M_1$, and the final output is taken from the drain of $M_2$. \n\n```\n          V_DD\n           |\n         [ R_L ]\n           |\n       +---o--- V_out\n       |\n     |/  M2 (Common-Gate)\n--+--|  (Gate is at AC ground)\n  |  |\\ v\n  |    |\n  |    +------- Node X (Drain of M1 / Source of M2)\n V_BIAS|\n     |/  M1 (Common-Source)\nVin--|\n     |\\ v\n       |\n      GND\n```\n\n---\n\n### 3. Why the Miller Effect Disappears\n\nThe suppression of the Miller effect comes down to two factors: **low gain across $M_1$** and **shielding provided by $M_2$**.\n\n#### A. The Voltage Gain of the First Transistor is Tiny ($\\approx -1$)\nThe Miller multiplication of $C_{gd1}$ depends *only* on the voltage gain from the Gate of $M_1$ to the Drain of $M_1$ (Node $X$).\n\n* The load seen by the drain of $M_1$ is the input impedance looking into the source of $M_2$.\n* The input impedance of a Common-Gate stage is very low: \n  $$R_{\\text{in2}} \\approx \\frac{1}{g_{m2}}$$\n* Therefore, the voltage gain ($A_{v1}$) from $V_{\\text{in}}$ to Node $X$ is:\n  $$A_{v1} = -g_{m1} \\times R_{\\text{in2}} \\approx -g_{m1} \\times \\frac{1}{g_{m2}} = -\\frac{g_{m1}}{g_{m2}}$$\n\nBecause $M_1$ and $M_2$ typically carry the same bias current and have similar sizes, their transconductances are roughly equal ($g_{m1} \\approx g_{m2}$). \n\nThus, the local voltage gain is:\n$$A_{v1} \\approx -1$$\n\nNow, applying Miller's Theorem to $C_{gd1}$:\n$$C_{\\text{in, Miller}} = C_{gd1}(1 - A_{v1}) \\approx C_{gd1}(1 - (-1)) = 2 C_{gd1}$$\n\nInstead of being multiplied by a factor of 50 or 100, **$C_{gd1}$ is only multiplied by 2.** The Miller effect on the input stage is effectively neutralized.\n\n#### B. The Second Transistor ($M_2$) Does Not Create a Miller Effect\nThe large voltage swing still exists at the final output ($V_{\\text{out}}$), meaning the total circuit gain ($A_{v, \\text{total}} \\approx -g_{m1} R_L$) is still high. However:\n* The capacitance between the output ($V_{\\text{out}}$) and the input of the second stage is $C_{gd2}$.\n* Because the gate of $M_2$ is tied to an AC ground (a DC bias voltage), $C_{gd2}$ connects the output directly to **ground**, not back to the signal input.\n* It simply acts as an output load capacitance—it does not create a feedback path from output to input.\n\n---\n\n### Summary\nThe cascode avoids the Miller effect by **decoupling the functions of current generation and voltage amplification**:\n1. **$M_1$** converts the input voltage to a current at very low voltage gain (killing the Miller multiplication across $C_{gd1}$).\n2. **$M_2$** passes that current to the high-impedance output to achieve high overall voltage gain, while its grounded gate acts as an electrostatic shield between the output and the input. \n\nThis gives the cascode the **high gain of a common-source amplifier** combined with the **wide bandwidth of a non-inverting amplifier**.",
        "format": "markdown",
        "sha256": "be9a12b48923cbef9070b1a9ee63785d8d7021a9fbd0fbb6431de932fd1702dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance drain-of-M1 node and derives a local gain near −1, so Cgd1 is multiplied by about 2 rather than the full stage gain. Its claims that the effect disappears or is neutralized overstate the reduction, but the golden solution treats this as a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14,
        "output_tokens": 2896,
        "total_tokens": 2910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14,
        "output_tokens": 2896,
        "total_tokens": 2910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** is significantly less pronounced in a cascode amplifier because the circuit is specifically designed to **minimize the voltage gain across the input transistor’s feedback capacitance**, preventing that capacitance from being multiplied.\n\nHere is a detailed breakdown of how and why this works.\n\n---\n\n### 1. The Root Cause of the Miller Effect\nIn a standard inverting amplifier (like a Common-Source MOSFET or Common-Emitter BJT):\n* There is a parasitic capacitance between the input and output: the gate-to-drain capacitance ($C_{gd}$) or base-to-collector capacitance ($C_\\mu$).\n* When an input signal changes, the output changes in the opposite direction by a factor of the voltage gain ($-A_v$).\n* The effective capacitance seen at the input node is multiplied by the gain:\n  $$C_{\\text{in, Miller}} = C_{gd} \\cdot (1 - A_v) \\approx C_{gd} \\cdot (1 + |A_v|)$$\n\nIf the amplifier has a high gain (e.g., $|A_v| = 50$), the input capacitance becomes $51 \\times C_{gd}$. This creates a low-frequency pole with the source resistance, **severely choking the high-frequency bandwidth**.\n\n---\n\n### 2. How the Cascode Solves This\nA cascode amplifier stacks two transistors:\n1. **$M_1$ (Input device):** A Common-Source (CS) amplifier that converts the input voltage to a current.\n2. **$M_2$ (Cascode device):** A Common-Gate (CG) amplifier whose gate is tied to AC ground; it acts as a current buffer.\n\n```\n       V_DD\n        |\n      [ R_L ]\n        |\n        +-----> V_out (High Gain)\n        |\n      [ M_2 ] (Common-Gate: Gate at AC Ground)\n        |\n        +-----> V_X (Intermediate Node: Low Gain!)\n        |\n      [ M_1 ] (Common-Source: Input at Gate)\n        |\n       GND\n```\n\n#### Step 1: The Input Stage Has Very Low Gain\nThe capacitance that normally causes the Miller effect is $C_{gd1}$ of the input transistor ($M_1$), which sits between the input node and the intermediate node ($V_X$).\n\nTo determine the Miller multiplication, we look at the voltage gain from the input to node $V_X$ ($A_{v1} = \\frac{v_x}{v_{in}}$):\n* The load seen by $M_1$ at node $V_X$ is the **input impedance looking into the source of $M_2$**.\n* The input impedance of a Common-Gate stage is famously low: \n  $$R_{\\text{in2}} \\approx \\frac{1}{g_{m2}}$$\n* Therefore, the voltage gain of $M_1$ is:\n  $$A_{v1} \\approx -g_{m1} \\times R_{\\text{in2}} = -g_{m1} \\times \\frac{1}{g_{m2}} = -\\frac{g_{m1}}{g_{m2}}$$\n\nBecause both transistors carry the same DC bias current and are typically matched in size, $g_{m1} \\approx g_{m2}$. \n\nThis means:\n$$A_{v1} \\approx -1$$\n\n#### Step 2: Miller Multiplication is Neutralized\nNow, calculate the Miller capacitance for the input transistor:\n$$C_{\\text{in, Miller}} = C_{gd1} \\cdot (1 - A_{v1}) \\approx C_{gd1} \\cdot (1 - (-1)) = 2 C_{gd1}$$\n\nInstead of being multiplied by $50\\times$ or $100\\times$, $C_{gd1}$ is only multiplied by approximately **$2\\times$**. The Miller effect at the input is essentially eliminated.\n\n---\n\n### 3. What About the Second Transistor ($M_2$)?\nYou might wonder if the Miller effect simply moved to the second transistor ($M_2$), since $M_2$ provides the large voltage swing at $V_{out}$. \n\n**It does not, for two reasons:**\n1. **The Gate is Grounded:** The parasitic capacitance between the output ($V_{out}$) and the gate of $M_2$ is tied to an **AC ground**. It behaves purely as a load capacitance to ground, not a feedback capacitance. It cannot feed back to the input.\n2. **Non-Inverting Configuration:** A Common-Gate amplifier does not invert the signal, and its input (Source) is completely shielded from the high output swing (Drain) by the grounded Gate.\n\n---\n\n### Summary\nThe cascode achieves high overall voltage gain by splitting the work into two steps:\n1. **$M_1$ provides transconductance ($g_m$)** but has virtually no voltage gain, neutralizing the Miller multiplication of $C_{gd1}$.\n2. **$M_2$ provides current buffering and high output impedance**, generating a massive overall voltage gain ($A_v \\approx -g_{m1} R_L$) without allowing the output voltage swings to feed back to the input. \n\nThis decoupling allows the cascode to provide the **high gain** of a single-stage amplifier with the **wide bandwidth** of a circuit that has no Miller effect.",
        "format": "markdown",
        "sha256": "a12025dac6565492a61312ed58c2f328133ab58899f07726afcc375ffa10bfa8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance source node of M2, derives an input-to-intermediate-node gain near −1, and shows Cgd1 is multiplied by about 2 rather than the full-stage gain. Its claims that the effect is essentially eliminated or there is virtually no gain overstate the reduction, but this is a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14,
        "output_tokens": 2773,
        "total_tokens": 2787,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14,
        "output_tokens": 2773,
        "total_tokens": 2787,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** is less pronounced in a cascode amplifier primarily because the **voltage gain across the input transistor is kept very low**, which prevents the feedback capacitance from being multiplied. \n\nHere is a detailed breakdown of the circuit mechanics that explain why this happens.\n\n---\n\n### 1. The Core Problem: The Miller Effect\nIn a standard single-transistor amplifier (like a Common-Source or Common-Emitter):\n* There is a parasitic capacitance between the input and output (the gate-to-drain capacitance, $C_{gd}$, or base-to-collector capacitance, $C_{bc}$).\n* According to Miller’s Theorem, this capacitance appears at the input multiplied by the stage’s voltage gain ($A_v$):\n  $$C_{in, Miller} = C_{gd} \\cdot (1 - A_v)$$\n* Because the amplifier inverts the signal, $A_v$ is negative. If the amplifier has a high gain (e.g., $A_v = -50$), the effective input capacitance becomes:\n  $$C_{in, Miller} \\approx 51 \\cdot C_{gd}$$\n* This huge capacitance, combined with the source resistance, creates a low-frequency pole that drastically reduces the amplifier’s **bandwidth**.\n\n---\n\n### 2. How the Cascode Solves This\nA cascode configuration stacks two transistors on top of each other:\n1. **$Q_1$ (Input stage):** Common-Source (or Common-Emitter).\n2. **$Q_2$ (Output stage):** Common-Gate (or Common-Base).\n\nThe Miller effect is suppressed through a two-part mechanism:\n\n#### A. The Input Transistor ($Q_1$) has Almost No Voltage Gain\nThe Miller capacitance only multiplies if there is a large voltage swing at the drain of $Q_1$. \n* The load seen by the drain of $Q_1$ is the source of $Q_2$. \n* The input impedance looking into the source of a Common-Gate amplifier is very low, approximately:\n  $$R_{in2} \\approx \\frac{1}{g_{m2}}$$\n* Therefore, the voltage gain ($A_{v1}$) from the input to the drain of $Q_1$ is:\n  $$A_{v1} \\approx -g_{m1} \\times R_{in2} \\approx -g_{m1} \\times \\frac{1}{g_{m2}} = -\\frac{g_{m1}}{g_{m2}}$$\n* If both transistors have roughly the same transconductance ($g_{m1} \\approx g_{m2}$), the voltage gain of the first stage is only:\n  $$A_{v1} \\approx -1$$\n\nApplying Miller's formula to $Q_1$:\n$$C_{in, Miller} = C_{gd1} \\cdot (1 - (-1)) = 2 \\cdot C_{gd1}$$\n\nInstead of being multiplied by 50 or 100, **$C_{gd1}$ is only multiplied by 2.** The Miller effect at the input is essentially eliminated.\n\n#### B. The Second Transistor ($Q_2$) Does Not Experience the Miller Effect\nYou might wonder: *doesn't the second transistor just suffer from the Miller effect instead?* \n\n**No.** \n* In $Q_2$ (Common-Gate/Base), the **gate is tied to an AC ground** (a constant DC bias voltage).\n* The parasitic capacitance between its output and its gate ($C_{gd2}$) connects directly to AC ground, not back to the signal input. \n* It simply acts as an output load capacitance; it does not form a feedback path between the output and input of the amplifier. Therefore, **no Miller multiplication occurs in $Q_2$**.\n\n---\n\n### Summary\nThe cascode separates the tasks of **voltage-to-current conversion** and **voltage amplification**:\n1. **$Q_1$** converts the input voltage to a current, but its output voltage cannot swing significantly because it is clamped by the low impedance of $Q_2$ (hence, **no Miller effect**).\n2. **$Q_2$** passes that current to a high-impedance output node to generate the large voltage gain, but its grounded gate prevents any feedback to the input (hence, **no Miller multiplication**).\n\nThis allows the cascode to achieve the **high gain** of a single high-impedance stage, but with the **high bandwidth** of a circuit that has no Miller effect.",
        "format": "markdown",
        "sha256": "60442fc08a2936a980bb44dac33f21f2a8587cc63612a56ddf1101e8851265b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the low-impedance node at M1’s drain and derives a gain near −1, so Cgd1 is multiplied by about 2 rather than the full-stage gain. However, it repeatedly says the Miller effect is eliminated; it is reduced, not eliminated, and the node is not an AC ground.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14,
        "output_tokens": 2529,
        "total_tokens": 2543,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1539,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14,
        "output_tokens": 2529,
        "total_tokens": 2543,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1539,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic from Behzad Razavi's *Design of Analog CMOS Integrated Circuits*, this circuit is a **Common-Gate (CG) Amplifier** with a **PMOS active current-source load**.\n\n---\n\n### 1. Transistor Identification and Operation\n\n* **$M_2$ (Input Transistor):**\n  * **Type:** NMOS transistor.\n  * **Configuration:** Common-gate.\n  * **Connections:** \n    * Gate is connected to a fixed DC bias voltage $V_{b1}$ (small-signal AC ground).\n    * Source is connected to the input signal $V_{\\text{in}}$.\n    * Drain is connected to the output node $V_{\\text{out}}$.\n  * **Condition for Saturation:** \n    $$V_{b1} - V_{\\text{in}} > V_{TH2}$$\n    $$V_{\\text{out}} \\ge V_{b1} - V_{TH2}$$\n\n* **$M_1$ (Load Transistor):**\n  * **Type:** PMOS transistor.\n  * **Configuration:** Active load / current source.\n  * **Connections:**\n    * Source is connected to the supply rail $V_{DD}$.\n    * Gate is connected to a fixed DC bias voltage $V_{b2}$.\n    * Drain is connected to the output node $V_{\\text{out}}$.\n  * **Condition for Saturation:**\n    $$V_{DD} - V_{b2} > |V_{TH1}|$$\n    $$V_{\\text{out}} \\le V_{b2} + |V_{TH1}|$$\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nAssuming both transistors are biased in the **saturation region**:\n\n1. **Bias Current ($I_D$):**\n   The PMOS device $M_1$ sets the bias current:\n   $$I_{D1} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{DD} - V_{b2} - |V_{TH1}|)^2 (1 + \\lambda_1 (V_{DD} - V_{\\text{out}}))$$\n\n   In the absence of channel-length modulation ($\\lambda \\approx 0$):\n   $$I_{D} \\approx \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{DD} - V_{b2} - |V_{TH1}|)^2$$\n\n2. **Source Voltage of $M_2$ (DC level at $V_{\\text{in}}$):**\n   $$I_{D2} = I_{D1} \\approx \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{b1} - V_{\\text{in,DC}} - V_{TH2})^2$$\n   $$V_{\\text{in,DC}} = V_{b1} - V_{TH2} - \\sqrt{\\frac{2 I_D}{\\mu_n C_{ox} (W/L)_2}}$$\n\n3. **Output Voltage Swing:**\n   For both transistors to remain in saturation:\n   $$V_{b1} - V_{TH2} \\le V_{\\text{out}} \\le V_{DD} - (V_{DD} - V_{b2} - |V_{TH1}|) = V_{b2} + |V_{TH1}|$$\n   $$\\text{i.e., } V_{b1} - V_{TH2} \\le V_{\\text{out}} \\le V_{b2} + |V_{TH1}|$$\n\n---\n\n### 3. Small-Signal Analysis\n\nLet:\n* $g_{m1}, r_{O1}$: transconductance and output resistance of $M_1$\n* $g_{m2}, g_{mb2}, r_{O2}$: transconductance, body-effect transconductance, and output resistance of $M_2$\n\n#### A. Voltage Gain ($A_v = v_{\\text{out}} / v_{\\text{in}}$)\n\n* **Neglecting Channel-Length Modulation ($\\lambda = 0$, so $r_{O1}, r_{O2} \\to \\infty$):**\n  A change in $v_{\\text{in}}$ changes the gate-to-source voltage of $M_2$ by $v_{gs2} = -v_{\\text{in}}$ and bulk-to-source voltage by $v_{bs2} = -v_{\\text{in}}$:\n  $$i_d \\approx (g_{m2} + g_{mb2}) v_{\\text{in}}$$\n  With finite $r_{O1}$ from the active load $M_1$:\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = (g_{m2} + g_{mb2}) r_{O1}$$\n\n* **Including Channel-Length Modulation ($\\lambda \\ne 0$) and Body Effect:**\n  Using the exact small-signal model for a common-gate stage:\n  $$A_v \\approx \\frac{(g_{m2} + g_{mb2}) r_{O2} + 1}{r_{O2} + r_{O1} + (g_{m2} + g_{mb2}) r_{O2} R_S} \\cdot r_{O1}$$\n  Assuming an ideal voltage source at the input ($R_S = 0$):\n  $$A_v = \\frac{1 + (g_{m2} + g_{mb2}) r_{O2}}{r_{O2} + r_{O1}} r_{O1} \\approx \\frac{(g_{m2} + g_{mb2})(r_{O1} \\parallel r_{O2})}{1 + \\frac{r_{O1} \\parallel r_{O2}}{r_{O2}}} \\dots$$\n  Direct nodal analysis at the output node yields:\n  $$A_v = \\frac{1 + (g_{m2} + g_{mb2})r_{O2}}{r_{O1} + r_{O2}} r_{O1}$$\n  If $(g_{m2} + g_{mb2}) r_{O2} \\gg 1$:\n  $$A_v \\approx (g_{m2} + g_{mb2}) (r_{O1} \\parallel r_{O2})$$\n\n> **Note:** The gain is **positive** (non-inverting), which is characteristic of the common-gate configuration.\n\n---\n\n#### B. Input Resistance ($R_{\\text{in}}$)\n\nLooking into the source of $M_2$:\n* **Neglecting body effect and $r_{O2} \\to \\infty$:**\n  $$R_{\\text{in}} \\approx \\frac{1}{g_{m2}}$$\n\n* **Including body effect and finite $r_{O1}, r_{O2}$:**\n  $$R_{\\text{in}} = \\frac{r_{O1} + r_{O2}}{1 + (g_{m2} + g_{mb2}) r_{O2}} \\approx \\frac{1}{g_{m2} + g_{mb2}} + \\frac{r_{O1}}{(g_{m2} + g_{mb2}) r_{O2}}$$\n\nBecause $r_{O1}$ is typically on the order of $r_{O2}$, the input resistance is relatively low ($\\sim \\frac{1}{g_{m2}}$), making the CG stage suitable as a current buffer or for wideband impedance matching (e.g., $50\\,\\Omega$ LNA inputs).\n\n---\n\n#### C. Output Resistance ($R_{\\text{out}}$)\n\nLooking into the output node $V_{\\text{out}}$:\n* Looking up into $M_1$: $R_{\\text{up}} = r_{O1}$\n* Looking down into $M_2$ (with ideal source $R_S = 0$):\n  $$R_{\\text{down}} = r_{O2}$$\n  *(If an input source resistance $R_S$ is present, $R_{\\text{down}} \\approx [1 + (g_{m2} + g_{mb2}) r_{O2}] R_S + r_{O2}$)*\n\n* **Total Output Resistance ($R_S = 0$):**\n  $$R_{\\text{out}} = R_{\\text{up}} \\parallel R_{\\text{down}} = r_{O1} \\parallel r_{O2}$$\n\n---\n\n### 4. Summary of Characteristics\n\n| Parameter | Expression (First-order approximation) |\n| :--- | :--- |\n| **Topology** | Common-Gate Amplifier with PMOS Current Source Load |\n| **Voltage Gain ($A_v$)** | $+(g_{m2} + g_{mb2})(r_{O1} \\parallel r_{O2})$ (Non-inverting) |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\approx \\frac{1}{g_{m2} + g_{mb2}}$ (Low) |\n| **Output Resistance ($R_{\\text{out}}$)** | $r_{O1} \\parallel r_{O2}$ (High) |\n| **Key Advantage** | High bandwidth (no Miller effect on $C_{gd2}$), good high-frequency response |",
        "format": "markdown",
        "sha256": "6c075c5a9322deaecbeb54dfa7578f0ee64c393a4126e4a2a9142f84c5f7309b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, source-driven input, bias voltages, non-inverting gain, low input resistance, and the correct approximate gain. Minor inconsistencies in optional detailed formulas do not change the central analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 8092,
        "total_tokens": 9203,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5990,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 8092,
        "total_tokens": 9203,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5990,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a detailed analysis of the given circuit.\n\n---\n\n### 1. Circuit Identification and Overview\n\nThe circuit is a **Common-Gate (CG) Amplifier** with an active current-source load:\n\n* **$M_2$ (NMOS transistor):** The amplifying (input) device configured in a common-gate topology.\n  * **Source:** Connected to the input signal $V_{\\text{in}}$.\n  * **Gate:** Biased at a constant DC voltage $V_{b1}$ (AC ground).\n  * **Drain:** Connected to the output node $V_{\\text{out}}$.\n* **$M_1$ (PMOS transistor):** Acts as an active current-source load.\n  * **Source:** Connected to the positive supply $V_{DD}$.\n  * **Gate:** Biased at a constant DC voltage $V_{b2}$.\n  * **Drain:** Connected to the output node $V_{\\text{out}}$.\n\n---\n\n### 2. DC Operating Conditions (Biasing & Headroom)\n\nFor linear amplification, both transistors must operate in the **saturation region**:\n\n1. **For $M_1$ (PMOS):**\n   * Condition: $|V_{DS1}| \\ge |V_{GS1}| - |V_{TH1}|$\n   * Since $V_{S1} = V_{DD}$ and $V_{G1} = V_{b2}$:\n     $$V_{DD} - V_{\\text{out}} \\ge (V_{DD} - V_{b2}) - |V_{TH1}| \\implies V_{\\text{out}} \\le V_{b2} + |V_{TH1}|$$\n\n2. **For $M_2$ (NMOS):**\n   * Condition: $V_{GS2} > V_{TH2}$ and $V_{DS2} \\ge V_{GS2} - V_{TH2}$\n   * With $V_{G2} = V_{b1}$ and DC source voltage $V_{\\text{in,DC}}$:\n     $$V_{\\text{out}} - V_{\\text{in,DC}} \\ge (V_{b1} - V_{\\text{in,DC}}) - V_{TH2} \\implies V_{\\text{out}} \\ge V_{b1} - V_{TH2}$$\n\n3. **Output Voltage Swing:**\n   $$V_{b1} - V_{TH2} \\le V_{\\text{out}} \\le V_{DD} - |V_{OD1}|$$\n   where $|V_{OD1}| = (V_{DD} - V_{b2}) - |V_{TH1}|$ is the overdrive voltage of $M_1$.\n\n---\n\n### 3. Small-Signal Analysis\n\nLet:\n* $g_{m2}, r_{O2}$ be the transconductance and output resistance of $M_2$.\n* $g_{mb2}$ be the body-effect transconductance of $M_2$ ($g_{mb2} = \\eta g_{m2}$), since the source of $M_2$ is not at AC ground and typically the body is tied to substrate/GND.\n* $r_{O1}$ be the output resistance of $M_1$.\n\n#### A. Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)\n\nApplying Kirchhoff's Current Law (KCL) at node $V_{\\text{out}}$:\n* Current entering the drain of $M_2$:\n  $$i_{d2} = -(g_{m2} + g_{mb2}) v_{\\text{in}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_{O2}}$$\n* Current flowing up into $M_1$:\n  $$i_{d1} = -\\frac{v_{\\text{out}}}{r_{O1}}$$\n\nSetting $i_{d1} = i_{d2}$:\n$$\\left(g_{m2} + g_{mb2} + \\frac{1}{r_{O2}}\\right) v_{\\text{in}} = v_{\\text{out}} \\left(\\frac{1}{r_{O1}} + \\frac{1}{r_{O2}}\\right)$$\n\nSolving for the gain:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{1 + (g_{m2} + g_{mb2})r_{O2}}{r_{O1} + r_{O2}} r_{O1} = \\left(g_{m2} + g_{mb2} + \\frac{1}{r_{O2}}\\right)(r_{O1} \\parallel r_{O2})$$\n\n* **Approximation:** If $g_{m2} r_{O2} \\gg 1$:\n  $$A_v \\approx (g_{m2} + g_{mb2})(r_{O1} \\parallel r_{O2})$$\n* **Polarity:** The gain is **positive (non-inverting)**.\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\n\nLooking into the source of $M_2$ with a load $R_L = r_{O1}$ at the drain:\n$$R_{\\text{in}} = \\frac{r_{O1} + r_{O2}}{1 + (g_{m2} + g_{mb2})r_{O2}}$$\n\n* **Special Cases:**\n  * If channel-length modulation is neglected ($r_{O2} \\to \\infty$):\n    $$R_{\\text{in}} \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n  * If $r_{O1} \\approx r_{O2}$:\n    $$R_{\\text{in}} \\approx \\frac{2}{g_{m2} + g_{mb2}}$$\n* **Conclusion:** The common-gate amplifier has a **relatively low input impedance**.\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\n\nLooking into node $V_{\\text{out}}$:\n* Looking up into $M_1$: $R_{\\text{up}} = r_{O1}$\n* Looking down into $M_2$ (with ideal source $v_{\\text{in}} = 0$): $R_{\\text{down}} = r_{O2}$\n\n$$R_{\\text{out}} = r_{O1} \\parallel r_{O2}$$\n\n*(If the input source has an internal resistance $R_S$, the resistance looking down is boosted to $R_{\\text{down}} \\approx r_{O2}[1 + (g_{m2} + g_{mb2})R_S]$).*\n\n---\n\n### 4. Frequency Response & Key Characteristics\n\n1. **No Miller Effect:**\n   * Unlike a Common-Source (CS) amplifier, the feedback capacitance $C_{gd2}$ connects between the output and AC ground (the gate), rather than between input and output.\n   * Consequently, there is **no Miller multiplication** of the gate-drain capacitance, giving the CG stage a **significantly wider bandwidth** than a CS stage.\n\n2. **Body Effect:**\n   * Because the source voltage varies with the input while the bulk is typically connected to ground ($V_B = 0$), $V_{BS} = -v_{\\text{in}} \\neq 0$. This introduces the body transconductance $g_{mb2}$, which slightly increases the voltage gain.\n\n---\n\n### 5. Summary of Circuit Properties\n\n| Parameter | Value / Characteristic |\n| :--- | :--- |\n| **Gain Polarity** | Non-inverting ($A_v > 0$) |\n| **Voltage Gain ($A_v$)** | $\\approx (g_{m2} + g_{mb2})(r_{O1} \\parallel r_{O2})$ |\n| **Input Impedance ($R_{\\text{in}}$)** | Low ($\\approx \\frac{1}{g_{m2} + g_{mb2}}$) |\n| **Output Impedance ($R_{\\text{out}}$)** | High ($r_{O1} \\parallel r_{O2}$) |\n| **Bandwidth** | Very wide (no Miller effect) |\n| **Typical Applications** | Current buffers, RF low-noise amplifiers (50 $\\Omega$ input matching), cascode stages. |",
        "format": "markdown",
        "sha256": "c54a9f42008b9c64c1376168ebf4ceba757e4477795e5a1e3d2b1d507fa2178b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, source-side input, bias voltages, non-inverting gain, and low input resistance. Its gain expression is equivalent to the golden result; additional details do not contradict the essential analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 8438,
        "total_tokens": 9549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 8438,
        "total_tokens": 9549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic, here is a detailed analysis of the circuit:\n\n---\n\n### 1. Circuit Identification and Topology\n\n* **Transistor $M_2$ (NMOS):** \n  * Acts as the **amplifying core** in a **Common-Gate (CG)** configuration.\n  * The gate is biased at a constant DC potential $V_{b1}$ (small-signal AC ground).\n  * The input signal $V_{\\text{in}}$ is applied to the **source** terminal.\n  * The drain terminal provides the output signal $V_{\\text{out}}$.\n\n* **Transistor $M_1$ (PMOS):** \n  * Acts as an **active current-source load**.\n  * The source is connected to the supply rail $V_{DD}$.\n  * The gate is held at a DC bias voltage $V_{b2}$.\n  * The drain connects directly to $V_{\\text{out}}$.\n\n---\n\n### 2. DC Biasing and Output Voltage Swing\n\nFor proper linear amplification, both transistors must operate in the **saturation region**:\n\n1. **Condition for $M_2$ (NMOS) in saturation:**\n   $$V_{GS2} = V_{b1} - V_{\\text{in}} > V_{TH,N}$$\n   $$V_{DS2} \\ge V_{GS2} - V_{TH,N} \\implies V_{\\text{out}} - V_{\\text{in}} \\ge (V_{b1} - V_{\\text{in}}) - V_{TH,N}$$\n   $$\\implies V_{\\text{out}} \\ge V_{b1} - V_{TH,N}$$\n\n2. **Condition for $M_1$ (PMOS) in saturation:**\n   $$V_{SG1} = V_{DD} - V_{b2} > |V_{TH,P}|$$\n   $$V_{SD1} \\ge V_{SG1} - |V_{TH,P}| \\implies V_{DD} - V_{\\text{out}} \\ge (V_{DD} - V_{b2}) - |V_{TH,P}|$$\n   $$\\implies V_{\\text{out}} \\le V_{b2} + |V_{TH,P}| = V_{DD} - |V_{ov1}|$$\n\n3. **Allowable Output Voltage Swing:**\n   $$V_{b1} - V_{TH,N} \\le V_{\\text{out}} \\le V_{DD} - |V_{ov1}|$$\n\n---\n\n### 3. Small-Signal AC Analysis\n\nLet:\n* $g_{m2}, g_{mb2}$ be the transconductance and body-effect transconductance of $M_2$.\n* $r_{O1}, r_{O2}$ be the output resistances of $M_1$ and $M_2$, respectively.\n\n#### A. Small-Signal Voltage Gain ($A_v$)\nApplying KCL at the output node $V_{\\text{out}}$:\n* Small-signal current from $M_2$ entering node $V_{\\text{out}}$:\n  $$i_{d2} = - (g_{m2} + g_{mb2}) v_{\\text{in}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_{O2}}$$\n* Small-signal current through the load $M_1$:\n  $$i_{1} = \\frac{v_{\\text{out}}}{r_{O1}}$$\n\nSetting $i_{d2} = i_1$:\n$$\\frac{v_{\\text{out}}}{r_{O1}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_{O2}} = (g_{m2} + g_{mb2})(-v_{\\text{in}})$$\n$$v_{\\text{out}} \\left( \\frac{1}{r_{O1}} + \\frac{1}{r_{O2}} \\right) = v_{\\text{in}} \\left( g_{m2} + g_{mb2} + \\frac{1}{r_{O2}} \\right)$$\n\nThis yields the exact voltage gain:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{1 + (g_{m2} + g_{mb2})r_{O2}}{r_{O1} + r_{O2}} \\cdot r_{O1}$$\n\nAssuming $(g_{m2} + g_{mb2})r_{O2} \\gg 1$:\n$$A_v \\approx (g_{m2} + g_{mb2})(r_{O1} \\parallel r_{O2})$$\n\n> **Key takeaway:** The gain is **positive (non-inverting)**. The body effect increases the effective transconductance to $(g_{m2} + g_{mb2}) = g_{m2}(1 + \\eta)$, slightly boosting the gain.\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the source of $M_2$ with load $r_{O1}$ at the drain:\n$$R_{\\text{in}} = \\frac{r_{O1} + r_{O2}}{1 + (g_{m2} + g_{mb2})r_{O2}}$$\n\n* If $r_{O1} \\ll r_{O2}$ or channel-length modulation is neglected:\n  $$R_{\\text{in}} \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n* If $r_{O1} \\approx r_{O2}$:\n  $$R_{\\text{in}} \\approx \\frac{2}{g_{m2} + g_{mb2}}$$\n\n> **Key takeaway:** The input impedance is **low**, on the order of $1/g_m$.\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nLooking into the node $V_{\\text{out}}$:\n* Looking upward into the drain of $M_1$: $R_{\\text{up}} = r_{O1}$\n* Looking downward into the drain of $M_2$ (assuming an ideal AC-grounded input source, $R_S = 0$): $R_{\\text{down}} = r_{O2}$\n\n$$R_{\\text{out}} = r_{O1} \\parallel r_{O2}$$\n\n*(If the input source has a finite source resistance $R_S$, $R_{\\text{down}} \\approx r_{O2}[1 + (g_{m2} + g_{mb2})R_S]$).*\n\n---\n\n### 4. Summary of Characteristics and Applications\n\n| Parameter | Common-Gate with Active Load |\n| :--- | :--- |\n| **Voltage Gain ($A_v$)** | Moderate to High, **Non-inverting** ($\\approx +g_{m2} (r_{O1} \\parallel r_{O2})$) |\n| **Input Impedance ($R_{\\text{in}}$)** | **Low** ($\\approx 1/g_m$) |\n| **Output Impedance ($R_{\\text{out}}$)** | **High** ($r_{O1} \\parallel r_{O2}$) |\n| **High-Frequency Performance** | **Excellent** (No Miller effect on $C_{GS2}$ since gate is grounded) |\n\n#### Common Applications:\n1. **High-Frequency Amplifiers / RF Front-Ends:** Since there is no Miller multiplication of the gate-source capacitance, the stage offers a very high bandwidth.\n2. **Current Buffer:** Converts a low-impedance input current signal to a high-impedance output voltage/current.\n3. **Impedance Matching:** Often designed such that $1/g_{m2} \\approx 50\\ \\Omega$ to match RF antennas and transmission lines.",
        "format": "markdown",
        "sha256": "6c207e75bc28fc89f797a426911fd2970358c7ff6ad294478eb02844d1278ce7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, and gives the non-inverting gain and low input resistance. The body-effect and finite-ro refinements are consistent with the golden solution.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 14816,
        "total_tokens": 15927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 14816,
        "total_tokens": 15927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure has **2 poles** (two poles).\n\n---\n\n### **Detailed Explanation:**\n\nTo determine the number of poles, we identify the number of independent nodes in the small-signal equivalent circuit that have capacitance to ground or to other nodes:\n\n1. **AC Grounded Terminals:**\n   - The source of $M_1$ is connected directly to ground.\n   - The gate, source, and bulk of $M_2$ are all connected to AC ground (or $V_{\\text{DD}}$).\n\n2. **Signal Nodes:**\n   - **Node 1 (Gate of $M_1$):** \n     - Connected to $V_{\\text{in}}$ through resistor $R_{\\text{S}}$.\n     - Connected to ground via the gate-source capacitance $C_{\\text{GS}}$.\n   - **Node 2 (Output node $V_{\\text{out}}$):** \n     - Connected to the drains of $M_1$ and $M_2$.\n     - The capacitors $C_{\\text{DB}}$, $C_{\\text{GD2}}$, and $C_{\\text{DB2}}$ all connect between this output node and AC ground. Therefore, they are in parallel and combine into a single equivalent load capacitance:\n       $$C_{\\text{L}} = C_{\\text{DB}} + C_{\\text{GD2}} + C_{\\text{DB2}}$$\n\n3. **Coupling between Nodes:**\n   - The gate-drain capacitance $C_{\\text{GD}}$ connects Node 1 (gate of $M_1$) to Node 2 (output node).\n\n### **Transfer Function Order:**\nBecause there are only **two independent nodes** (the gate of $M_1$ and the output node $V_{\\text{out}}$) with associated capacitances, solving Kirchhoff’s Current Law (KCL) at both nodes yields a system of equations whose denominator is a **quadratic polynomial in $s$** ($s^2$ term):\n\n$$D(s) = a s^2 + b s + 1$$\n\nwhere the coefficient of $s^2$ is proportional to:\n$$(C_{\\text{GS}} C_{\\text{L}} + C_{\\text{GS}} C_{\\text{GD}} + C_{\\text{L}} C_{\\text{GD}})$$\n\nSince the denominator polynomial is second-order, the circuit has **2 poles**. \n\n*(Note: The circuit also has **one zero** in the right-half plane at $\\omega_z = +g_{m1}/C_{\\text{GD}}$ due to the feedforward path through $C_{\\text{GD}}$.)*",
        "format": "markdown",
        "sha256": "a1db168c8dfff600e8ea32dbf3b38e12c3b2cfdff757e169acec796013c233c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent capacitive nodes—the M1 gate and the output—and assigns the listed capacitances to the appropriate nodes. The resulting second-order denominator supports two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4142,
        "total_tokens": 5235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3572,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4142,
        "total_tokens": 5235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3572,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\n---\n\n### **Explanation:**\n\n1. **Identify the Nodes:**\n   In the small-signal equivalent circuit, all DC supply voltages and constant bias voltages are replaced by AC grounds. \n   - The sources and bulks of $M_1$ and $M_2$, as well as the gate of $M_2$, are all connected to AC ground.\n   - The input $V_{\\text{in}}$ is an ideal voltage source.\n\n   Therefore, there are only **two signal-dependent nodes**:\n   - **Node 1 (Gate of $M_1$):** Connected to $V_{\\text{in}}$ through resistor $R_S$.\n   - **Node 2 (Output node $V_{\\text{out}}$):** Connected to the drains of $M_1$ and $M_2$.\n\n2. **Group the Capacitances:**\n   - **At Node 1 to ground:** $C_{\\text{GS}}$\n   - **Between Node 1 and Node 2:** $C_{\\text{GD}}$\n   - **At Node 2 ($V_{\\text{out}}$) to ground:** $C_{\\text{DB}}$, $C_{\\text{GD2}}$, and $C_{\\text{DB2}}$ are all connected between the output node and AC ground. They act in parallel and can be lumped into an equivalent load capacitance:\n     $$C_{\\text{L,tot}} = C_{\\text{DB}} + C_{\\text{GD2}} + C_{\\text{DB2}}$$\n\n3. **Order of the System:**\n   Applying Kirchhoff's Current Law (KCL) at these two independent nodes yields two linearly independent equations:\n   - At Node 1:\n     $$\\frac{V_1 - V_{\\text{in}}}{R_S} + s C_{\\text{GS}} V_1 + s C_{\\text{GD}} (V_1 - V_{\\text{out}}) = 0$$\n   - At Node 2:\n     $$g_{m1} V_1 + \\frac{V_{\\text{out}}}{r_{O1} \\parallel r_{O2}} + s C_{\\text{GD}} (V_{\\text{out}} - V_1) + s C_{\\text{L,tot}} V_{\\text{out}} = 0$$\n\n   Solving for the transfer function $\\frac{V_{\\text{out}}(s)}{V_{\\text{in}}(s)}$ results in a characteristic equation (denominator) of degree **2** in $s$:\n   $$D(s) = a_2 s^2 + a_1 s + 1$$\n\nSince the denominator is a quadratic polynomial in $s$, the circuit has **2 poles** (and one right-half-plane zero created by $C_{\\text{GD}}$).",
        "format": "markdown",
        "sha256": "59b4c11c7c03d38cbdb569fe333555a0a6ba0dbe28d75603d8a9682b5ee318d7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent nodes—the M1 gate and output—and assigns the coupling and grounded capacitances to the appropriate nodes, supporting the two-pole conclusion.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 3786,
        "total_tokens": 4879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 3786,
        "total_tokens": 4879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure has **2 poles** (or **two poles**).\n\n### Explanation:\n\n1. **Identify the signal nodes:**\n   In the small-signal equivalent circuit, all DC supply voltages and biases act as AC ground:\n   * The source and bulk of $M_2$ are tied to AC ground ($V_{\\text{DD}}$).\n   * The gate of $M_2$ is tied to AC ground (DC bias).\n   * The source and bulk of $M_1$ are connected to ground.\n\n   This leaves only **two independent nodes** that have time-varying voltages:\n   * **Node 1:** The gate of transistor $M_1$.\n   * **Node 2:** The output node, $V_{\\text{out}}$ (connected to the drains of $M_1$ and $M_2$).\n\n2. **Combine parallel capacitances:**\n   * At **Node 1** (gate of $M_1$), the capacitance to ground is $C_{\\text{GS}}$.\n   * At **Node 2** (drain/output), the capacitors $C_{\\text{DB}}$, $C_{\\text{GD2}}$, and $C_{\\text{DB2}}$ are all connected directly between $V_{\\text{out}}$ and AC ground. These can be combined in parallel as an effective load capacitance:\n     $$C_{\\text{out}} = C_{\\text{DB}} + C_{\\text{GD2}} + C_{\\text{DB2}}$$\n   * Bridging Node 1 and Node 2 is the feedback capacitance $C_{\\text{GD}}$.\n\n3. **Order of the system:**\n   Since there are two independent nodes with non-zero capacitance, writing the nodal equations yields a system of two coupled first-order differential equations. The denominator of the transfer function $V_{\\text{out}}(s)/V_{\\text{in}}(s)$ is a second-order polynomial in $s$ ($a s^2 + b s + 1$), which corresponds to **two poles** (and one right-half-plane zero due to $C_{\\text{GD}}$).",
        "format": "markdown",
        "sha256": "2aea4c4d613e4f2ef3949deb6faf69c498841c24a3a04e433730ed0f7ef6ac42"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent nodes and assigns the capacitances to the proper nodes; the bridging CGD does not create a third pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 3419,
        "total_tokens": 4512,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2963,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 3419,
        "total_tokens": 4512,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2963,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a modified common-source amplifier with a composite/stacked NMOS pull-down network, where the input voltage $V_{\\text{in}}$ drives the gates of **both** transistors $M_1$ and $M_2$. \n\nBelow is a detailed analysis covering its DC operating regions, small-signal gain, input/output impedances, and key intuitive insights.\n\n---\n\n### 1. DC Analysis & Operating Regions\n\nLet $V_X$ be the voltage at the intermediate node between $M_1$ and $M_2$ (the drain of $M_1$ and source of $M_2$).\n\n* **Gate-to-source voltages:**\n  $$V_{GS1} = V_{\\text{in}}$$\n  $$V_{GS2} = V_{\\text{in}} - V_X$$\n\n* **Region of Operation of $M_1$:**\n  * For $M_2$ to conduct, its gate-to-source voltage must exceed its threshold voltage:\n    $$V_{GS2} > V_{TH2} \\implies V_{\\text{in}} - V_X > V_{TH2} \\implies V_X < V_{\\text{in}} - V_{TH2}$$\n  * Due to the body effect (since the source of $M_2$ is at $V_X > 0$), $V_{TH2} \\ge V_{TH1}$. Therefore:\n    $$V_{DS1} = V_X < V_{\\text{in}} - V_{TH1} = V_{GS1} - V_{TH1}$$\n  * **Conclusion:** $V_{DS1}$ is strictly less than the overdrive voltage $V_{GS1} - V_{TH1}$. Hence, **$M_1$ always operates in the triode (linear) region**, acting essentially as a voltage-controlled degeneration resistor.\n\n* **Region of Operation of $M_2$:**\n  * For $M_2$ to be in saturation:\n    $$V_{DS2} \\ge V_{GS2} - V_{TH2} \\implies V_{\\text{out}} - V_X \\ge (V_{\\text{in}} - V_X) - V_{TH2}$$\n    $$V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH2}$$\n  * As long as the output swing satisfies this condition, **$M_2$ operates in saturation**.\n\n---\n\n### 2. Small-Signal Model and Voltage Gain\n\n#### A. Realistic Case ($M_1$ in Triode, $M_2$ in Saturation)\nIn the triode region, the current through $M_1$ is:\n$$I_{D1} \\approx \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 \\left[ (V_{\\text{in}} - V_{TH1})V_X - \\frac{1}{2}V_X^2 \\right]$$\n\nThe small-signal parameters of $M_1$ are:\n* Transconductance: $g_{m1} = \\frac{\\partial I_{D1}}{\\partial V_{\\text{in}}} = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 V_X$\n* Channel conductance: $g_{ds1} = \\frac{1}{r_{ds1}} = \\frac{\\partial I_{D1}}{\\partial V_X} = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH1} - V_X)$\n\nNote that the sum is:\n$$g_{m1} + g_{ds1} = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH1}) \\equiv g_{\\text{on1}}$$\n\nFor transistor $M_2$ (assuming negligible body effect and $\\lambda_2 = 0$ for simplicity):\n$$i_{d2} = g_{m2}(v_{\\text{in}} - v_x)$$\n\nEquating the currents through both devices ($i_{d1} = i_{d2} = i_d$):\n$$g_{m1} v_{\\text{in}} + g_{ds1} v_x = g_{m2}(v_{\\text{in}} - v_x)$$\n$$v_x = \\frac{g_{m2} - g_{m1}}{g_{m2} + g_{ds1}} v_{\\text{in}}$$\n\nThe overall small-signal current $i_d$ is:\n$$i_d = g_{m2}(v_{\\text{in}} - v_x) = g_{m2} \\left(1 - \\frac{g_{m2} - g_{m1}}{g_{m2} + g_{ds1}}\\right) v_{\\text{in}} = \\frac{g_{m2}(g_{m1} + g_{ds1})}{g_{m2} + g_{ds1}} v_{\\text{in}}$$\n\nSince $v_{\\text{out}} = -i_d R_D$, the small-signal voltage gain $A_v$ is:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -\\frac{g_{m2}(g_{m1} + g_{ds1})}{g_{m2} + g_{ds1}} R_D$$\n\n* **Approximation:** When $V_X \\ll V_{\\text{in}} - V_{TH1}$, $g_{m1} \\ll g_{ds1}$, so $g_{ds1} \\approx 1/R_{\\text{on1}}$ and:\n  $$A_v \\approx -\\frac{g_{m2}}{1 + g_{m2} R_{\\text{on1}}} R_D$$\n\n---\n\n#### B. Textbook / Idealized Case ($\\lambda = 0, \\gamma = 0$, assuming both in saturation)\nIf simplified textbook assumptions are used where both transistors are treated with ideal saturation current sources:\n* The current is set entirely by $M_1$: $i_{d1} = g_{m1} v_{\\text{in}}$.\n* Since $M_2$ is in series, $i_d = i_{d1} = g_{m1} v_{\\text{in}}$.\n* The gain is simply:\n  $$A_v = -g_{m1} R_D$$\n\n---\n\n#### C. Generalized Gain (Including Channel-Length Modulation & Body Effect)\nUsing the short-circuit transconductance method:\n$$A_v = -G_m (R_{\\text{out}} \\parallel R_D)$$\n\nWhere:\n* **Output Resistance:**\n  $$R_{\\text{out}} = r_{O1} + r_{O2} + (g_{m2} + g_{mb2}) r_{O1} r_{O2}$$\n* **Short-Circuit Transconductance ($G_m$):**\n  By applying superposition (decomposing into input applied to $M_1$ and input applied to $M_2$):\n  $$G_m = \\frac{g_{m1} r_{O1} [1 + (g_{m2} + g_{mb2}) r_{O2}] + g_{m2} r_{O2}}{R_{\\text{out}}}$$\n\n---\n\n### 3. Input and Output Impedance\n\n1. **Input Impedance ($R_{\\text{in}}$):**\n   * At low frequencies: Looking into the insulated MOS gates, $R_{\\text{in}} = \\infty$.\n   * At high frequencies: The input capacitance includes contributions from both devices:\n     $$C_{\\text{in}} \\approx C_{gs1} + C_{gd1}(1 - A_{vX}) + C_{gs2}(1 - A_{vX}) + C_{gd2}(1 - A_v)$$\n     where $A_{vX} = v_x / v_{\\text{in}}$.\n\n2. **Output Impedance ($R_{\\text{out,total}}$):**\n   $$R_{\\text{out,total}} = R_D \\parallel R_{\\text{out}}$$\n   where $R_{\\text{out}} \\approx (g_{m2} + g_{mb2}) r_{O1} r_{O2}$ is the cascode-boosted output impedance looking down into the drain of $M_2$.\n\n---\n\n### 4. Summary & Intuitive Operation\n\n* **Phase:** The circuit acts as an **inverting amplifier** ($A_v < 0$).\n* **Mechanism:** An increase in $V_{\\text{in}}$ causes two simultaneous effects that assist each other:\n  1. It increases the gate voltage of $M_2$, directly increasing drain current.\n  2. It increases the gate voltage of $M_1$, lowering the resistance $R_{\\text{on1}}$ of $M_1$, which pulls node $X$ closer to ground and further increases $V_{GS2}$.\n* **Comparison to Standard Cascode:** In a standard cascode amplifier, the gate of $M_2$ is tied to a constant bias voltage to provide high output impedance and shield the input from the Miller effect. In this topology, driving both gates enhances transconductance, but sacrifices the shielding/frequency benefits of the cascode.",
        "format": "markdown",
        "sha256": "db6306c21edc7b606520f51986a447a8f85705ab799ba0a19b647a3b6fcc2083"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate stack and the usual operating regions (M1 triode, M2 saturation), but misses the essential longer-effective-channel interpretation. Its cascode-boosted output-resistance analysis and both-saturated case are inappropriate for this structure.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 13430,
        "total_tokens": 14549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 13430,
        "total_tokens": 14549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Overview and Topology\n\nThe circuit is an **inverting common-source-type amplifier** with two stacked NMOS transistors ($M_1$ and $M_2$) and a resistive drain load $R_D$:\n* **Input ($V_{\\text{in}}$):** Tied simultaneously to the gates of both $M_1$ and $M_2$.\n* **Output ($V_{\\text{out}}$):** Taken at the drain of $M_2$.\n* **Intermediate Node ($X$):** Connects the drain of $M_1$ to the source of $M_2$ ($V_X = V_{D1} = V_{S2}$).\n* **Difference from a Standard Cascode:** In a conventional cascode amplifier, the gate of $M_2$ is held at a constant DC bias voltage. Here, both gates are driven by the input signal $V_{\\text{in}}$.\n\n---\n\n### 2. Large-Signal / DC Operating Regions\n\n#### A. Conduction Conditions\n* If $V_{\\text{in}} < V_{TH1}$, $M_1$ is OFF. No current flows through the branch, so $I_D = 0$ and $V_{\\text{out}} = V_{DD}$.\n* When $V_{\\text{in}} > V_{TH1}$, current begins to flow through both transistors.\n\n#### B. Operating Region of $M_1$ and $M_2$\nA critical insight for this topology is determining whether both transistors can be in saturation simultaneously:\n1. For $M_2$ to conduct, its gate-to-source voltage must satisfy:\n   $$V_{GS2} = V_{\\text{in}} - V_X > V_{TH2} \\implies V_X < V_{\\text{in}} - V_{TH2}$$\n2. For $M_1$ to be in saturation, its drain-to-source voltage must satisfy:\n   $$V_{DS1} = V_X \\ge V_{\\text{in}} - V_{TH1}$$\n3. Because the substrate of $M_2$ is grounded while its source is at $V_X \\ge 0$, body effect causes $V_{TH2} \\ge V_{TH1}$. \n4. Combining these conditions would require:\n   $$V_{\\text{in}} - V_{TH1} \\le V_X < V_{\\text{in}} - V_{TH2}$$\n   Since $V_{TH2} \\ge V_{TH1}$, this inequality **cannot be satisfied** for any non-zero current.\n\n> **Conclusion:** When the circuit is conducting, **$M_1$ operates in the triode (linear) region**, while $M_2$ operates in **saturation** (provided $V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH2}$).\n\n#### C. Equivalent Single-Transistor Interpretation\nIf body effect is neglected ($\\gamma = 0$) and the channel widths are equal ($W_1 = W_2 = W$):\n* Since $M_1$ is in triode, its channel does not pinch off. The channel of $M_1$ connects continuously into the channel of $M_2$, with pinch-off occurring only at the drain of $M_2$.\n* The two stacked transistors behave identically to a **single composite MOSFET** with an effective channel length:\n  $$L_{\\text{eq}} = L_1 + L_2$$\n* If $L_1 = L_2 = L$, the equivalent aspect ratio is halved:\n  $$\\left(\\frac{W}{L}\\right)_{\\text{eq}} = \\frac{1}{2} \\left(\\frac{W}{L}\\right)$$\n\n---\n\n### 3. Small-Signal Analysis\n\nLet:\n* $v_{\\text{in}}$ be the small-signal input.\n* $v_X$ be the small-signal voltage at the intermediate node.\n* $g_{m1}, g_{m2}$ be the transconductances of $M_1$ and $M_2$.\n* $r_{O1}, r_{O2}$ be the output resistances of $M_1$ and $M_2$.\n* $g_{mb2}$ be the body-effect transconductance of $M_2$ ($g_{mb1} = 0$ since $v_{s1} = 0$).\n\n---\n\n#### Case I: Idealized Case ($\\lambda = 0$, $\\gamma = 0$)\nAssuming infinite channel output resistances ($r_{O1} = r_{O2} = \\infty$) and neglecting body effect:\n\n1. **Current through $M_1$:**\n   $$i_{d1} = g_{m1} v_{gs1} = g_{m1} v_{\\text{in}}$$\n2. **Current through $M_2$:**\n   $$i_{d2} = g_{m2} v_{gs2} = g_{m2} (v_{\\text{in}} - v_X)$$\n3. Since node $X$ has no other DC/AC path, $i_{d1} = i_{d2}$:\n   $$g_{m1} v_{\\text{in}} = g_{m2}(v_{\\text{in}} - v_X) \\implies v_X = \\left(1 - \\frac{g_{m1}}{g_{m2}}\\right) v_{\\text{in}}$$\n4. The output voltage is determined by the current flowing through $R_D$:\n   $$v_{\\text{out}} = - i_{d2} R_D = - g_{m1} R_D v_{\\text{in}}$$\n\nThe ideal voltage gain is:\n$$\\boxed{A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m1} R_D}$$\n\n*(Note: If modeled as the equivalent single transistor with transconductance $g_{m,\\text{eq}}$, then $A_v = -g_{m,\\text{eq}} R_D$.)*\n\n---\n\n#### Case II: General Case ($\\lambda \\neq 0$, $\\gamma \\neq 0$)\n\nUsing the short-circuit transconductance ($G_m$) and output resistance ($R_{\\text{out}}$) method:\n$$A_v = - G_m R_{\\text{out}}$$\n\n##### 1. Output Resistance Looking into the Drain of $M_2$ ($R_o$)\nLooking down into the drain of $M_2$ with source degenerated by $r_{O1}$:\n$$R_o = r_{O1} + r_{O2} + (g_{m2} + g_{mb2}) r_{O1} r_{O2}$$\n\nThe total small-signal output resistance is:\n$$\\boxed{R_{\\text{out}} = R_D \\parallel R_o}$$\n\n##### 2. Short-Circuit Transconductance ($G_m$)\nSet $v_{\\text{out}} = 0$ (AC ground) and calculate the short-circuit current $i_{\\text{out}}$:\n* At node $X$:\n  $$i_{\\text{out}} = g_{m1} v_{\\text{in}} + \\frac{v_X}{r_{O1}}$$\n  $$i_{\\text{out}} = g_{m2}(v_{\\text{in}} - v_X) - g_{mb2} v_X - \\frac{v_X}{r_{O2}}$$\n\nEquating both expressions and solving for $v_X$:\n$$v_X = \\frac{g_{m2} - g_{m1}}{g_{m2} + g_{mb2} + \\frac{1}{r_{O1}} + \\frac{1}{r_{O2}}} v_{\\text{in}}$$\n\nSubstituting $v_X$ back gives the overall transconductance:\n$$\\boxed{G_m = g_{m1} + (g_{m2} - g_{m1}) \\frac{r_{O2}}{R_o}}$$\n\n* **Special Case ($g_{m1} \\approx g_{m2} = g_m$):**\n  $$G_m \\approx g_m$$\n  $$A_v \\approx -g_m (R_D \\parallel R_o)$$\n\n##### 3. Overall Voltage Gain\n$$\\boxed{A_v = - \\left[ g_{m1} + (g_{m2} - g_{m1}) \\frac{r_{O2}}{R_o} \\right] (R_D \\parallel R_o)}$$\n\n---\n\n### 4. Summary of Circuit Characteristics\n\n| Parameter | Value / Expression | Notes |\n| :--- | :--- | :--- |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ | Looking into purely capacitive MOS gates at low frequency. |\n| **Output Impedance ($R_{\\text{out}}$)** | $R_D \\parallel R_o \\approx R_D$ | Typically $R_o \\gg R_D$, so $R_{\\text{out}}$ is dominated by $R_D$. |\n| **Voltage Gain ($A_v$)** | $\\approx -g_{m1} R_D$ | Inverting amplifier response. |\n| **Operating Modes** | $M_1$: Triode, $M_2$: Saturation | $M_1$ cannot saturate if $M_2$ is conducting. |",
        "format": "markdown",
        "sha256": "715a776793eca8916e284ec36b97e62f467e5f8e17bd4a1c312fd4525ea21a9a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate drive, M1’s triode operation, and the effective channel length L1+L2. However, the small-signal analysis then treats the circuit with a cascode-style output-resistance formula and an invalid ideal gain derivation, contradicting the triode-channel model and making its amplifier conclusions unreliable.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 13263,
        "total_tokens": 14382,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11152,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 13263,
        "total_tokens": 14382,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11152,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **stacked NMOS amplifier** (often called a *composite transistor* or *split-length transistor* common-source stage) with a resistive load $R_D$. The distinguishing feature of this circuit is that the gates of both transistors $M_1$ and $M_2$ are tied together to the input signal $V_{\\text{in}}$.\n\n---\n\n### 1. Intuitive Perspective: The Composite Transistor\n\nWhen two identical MOSFETs are placed in series with their gates connected together, they behave identically to a **single MOSFET with twice the channel length**:\n* If $M_1$ and $M_2$ have dimensions $(W/L)_1$ and $(W/L)_2$ with $W_1 = W_2 = W$, the effective length is:\n  $$L_{\\text{eff}} = L_1 + L_2 = 2L$$\n* The equivalent aspect ratio is:\n  $$\\left(\\frac{W}{L}\\right)_{\\text{eq}} = \\left(\\frac{W}{L}\\right)_1 \\parallel \\left(\\frac{W}{L}\\right)_2 = \\frac{(W/L)_1 (W/L)_2}{(W/L)_1 + (W/L)_2}$$\n  For identical transistors, $(W/L)_{\\text{eq}} = \\frac{1}{2}(W/L)$.\n\n---\n\n### 2. Large-Signal Operation & Operating Regions\n\nLet $V_X$ denote the voltage at the node between $M_1$ and $M_2$.\n\n#### A. Region 1: Cutoff ($V_{\\text{in}} < V_{TH1}$)\n* Both transistors are OFF ($I_D = 0$).\n* No current flows through $R_D$:\n  $$V_{\\text{out}} = V_{DD}$$\n\n---\n\n#### B. Region 2: Active Amplification ($M_1$ in Triode, $M_2$ in Saturation)\nAs $V_{\\text{in}} > V_{TH1}$, current begins to flow. \n\n**Can $M_1$ ever be in saturation?**\n* For $M_1$ to be in saturation, we require:\n  $$V_{DS1} = V_X \\ge V_{GS1} - V_{TH1} = V_{\\text{in}} - V_{TH1}$$\n* However, the gate-source voltage of $M_2$ is:\n  $$V_{GS2} = V_{\\text{in}} - V_X$$\n* If $V_X \\ge V_{\\text{in}} - V_{TH1}$, then:\n  $$V_{GS2} \\le V_{TH1}$$\n* Since the body effect causes the threshold voltage of $M_2$ to increase ($V_{TH2} \\ge V_{TH1}$), having $V_{GS2} \\le V_{TH1} \\le V_{TH2}$ means **$M_2$ would be cut off**.\n* Therefore, for any non-zero current to flow through $M_2$, $V_X$ must be lower than $V_{\\text{in}} - V_{TH1}$. \n* **Conclusion:** **$M_1$ is ALWAYS in the TRIODE region**, while $M_2$ operates in **SATURATION** (as long as $V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH2}$).\n\n**Intermediate Node Voltage ($V_X$):**\nEquating the triode current of $M_1$ with the saturation current of $M_2$ (assuming identical devices and neglecting body effect/channel-length modulation):\n$$I_{D1} = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) \\left[(V_{\\text{in}} - V_{TH})V_X - \\frac{1}{2}V_X^2\\right] = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)(V_{\\text{in}} - V_X - V_{TH})^2 = I_{D2}$$\n\nSolving for $V_X$ yields:\n$$V_X = \\left(1 - \\frac{1}{\\sqrt{2}}\\right)(V_{\\text{in}} - V_{TH}) \\approx 0.293\\,(V_{\\text{in}} - V_{TH})$$\n\n**Total Current and Output Voltage:**\nSubstituting $V_X$ back into $I_{D2}$:\n$$I_D = \\frac{1}{4} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_{\\text{in}} - V_{TH})^2 = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{2L}\\right)(V_{\\text{in}} - V_{TH})^2$$\n$$V_{\\text{out}} = V_{DD} - I_D R_D = V_{DD} - \\frac{1}{4}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)(V_{\\text{in}} - V_{TH})^2 R_D$$\n\n---\n\n#### C. Region 3: Triode Region (Both $M_1$ and $M_2$ in Triode)\nAs $V_{\\text{in}}$ continues to rise, $V_{\\text{out}}$ drops. When:\n$$V_{\\text{out}} < V_{\\text{in}} - V_{TH2}$$\n$M_2$ enters the triode region as well, and $V_{\\text{out}}$ gradually pulls down toward $0\\text{ V}$.\n\n---\n\n### 3. Small-Signal Analysis\n\n#### Method 1: Using the Equivalent Transistor (Neglecting $\\lambda$ and $\\gamma$)\nThe effective transconductance of the composite pair is:\n$$G_m = \\frac{\\partial I_D}{\\partial V_{\\text{in}}} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)(V_{\\text{in}} - V_{TH}) = \\frac{1}{2}g_{m0}$$\nwhere $g_{m0}$ is the transconductance of a single standard transistor of size $W/L$.\n\nThe voltage gain is:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -G_m R_D = -\\frac{1}{2} g_{m0} R_D$$\n\n---\n\n#### Method 2: Rigorous Small-Signal Nodal Analysis\nAccounting for finite output resistances ($r_{o1}, r_{o2}$) and body effect on $M_2$ ($g_{mb2}$):\n\n1. **Currents at node $X$:**\n   * Through $M_1$: $i_{d1} = g_{m1} v_{\\text{in}} + g_{ds1} v_X$\n   * Through $M_2$: $i_{d2} = g_{m2}(v_{\\text{in}} - v_X) - g_{mb2} v_X + g_{ds2}(v_{\\text{out}} - v_X)$\n   where $g_{ds1} = 1/r_{o1}$ and $g_{ds2} = 1/r_{o2}$.\n\n2. **Short-Circuit Transconductance ($G_m$):**\n   Setting $v_{\\text{out}} = 0$ and equating $i_{d1} = i_{d2}$:\n   $$G_m = \\frac{g_{m1}(g_{m2} + g_{mb2} + g_{ds2}) + g_{m2} g_{ds1}}{g_{m2} + g_{mb2} + g_{ds1} + g_{ds2}}$$\n\n   *(Notice that for ideal transistors with $g_{mb2}=0, g_{ds2}=0$, since $g_{ds1} = g_{m2} = \\frac{g_{m0}}{\\sqrt{2}}$ and $g_{m1} = \\left(1 - \\frac{1}{\\sqrt{2}}\\right)g_{m0}$, this simplifies cleanly to $G_m = \\frac{1}{2}g_{m0}$.)*\n\n3. **Output Resistance ($R_{\\text{out}}$):**\n   Looking into the drain of $M_2$ with $v_{\\text{in}} = 0$, $M_2$ acts as a cascode transistor degenerated by $r_{o1}$:\n   $$R_{\\text{out}, M} = r_{o1} + r_{o2} + (g_{m2} + g_{mb2})r_{o1}r_{o2}$$\n   The total small-signal output resistance is:\n   $$R_{\\text{out}} = R_D \\parallel R_{\\text{out}, M}$$\n\n4. **Overall Voltage Gain:**\n   $$A_v = -G_m (R_D \\parallel R_{\\text{out}, M})$$\n   When $R_D \\ll R_{\\text{out}, M}$:\n   $$A_v \\approx -G_m R_D$$\n\n---\n\n### 4. Summary of Key Characteristics\n\n| Parameter | Value (for identical devices, $\\lambda \\approx 0$) |\n| :--- | :--- |\n| **Operating State of $M_1$** | **Triode** for all conducting states |\n| **Operating State of $M_2$** | **Saturation** (until $V_{\\text{out}} < V_{\\text{in}} - V_{TH2}$) |\n| **Intermediate Voltage $V_X$** | $\\approx 0.293\\,(V_{\\text{in}} - V_{TH})$ |\n| **Effective Transconductance $G_m$** | $\\frac{1}{2} g_{m0}$ |\n| **Output Resistance $R_{\\text{out}}$** | $R_D \\parallel [r_{o1} + r_{o2} + (g_{m2} + g_{mb2})r_{o1}r_{o2}] \\approx R_D$ |\n| **Small-Signal Voltage Gain $A_v$** | $-\\frac{1}{2} g_{m0} R_D$ |",
        "format": "markdown",
        "sha256": "d80bcd9e5ea06daea1f33f37ee2f2bed67e6b4a4533cda0396953cf81fd4807c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate-driven series NMOS pair, with M1 in triode and M2 in saturation, and concludes that it behaves approximately like a device with the summed channel length. Its output-resistance expression uses r_o1 as the lower triode device’s resistance, consistent with the allowed r_on1 degeneration model rather than a both-saturated cascode.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 20089,
        "total_tokens": 21208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 20089,
        "total_tokens": 21208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **single-ended differential amplifier** (often analyzed as a **common-drain (source follower) stage cascading into a common-gate stage**). \n\nBelow is a detailed analysis covering its operating principles, DC biasing, small-signal voltage gain, impedances, and frequency response.\n\n---\n\n### 1. Qualitative Operation and Topology Overview\n\n* **Signal Path:** \n  * The input voltage $V_{\\text{in}}$ is applied to the gate of $M_1$, which acts as a **source follower (common-drain)**.\n  * The signal appears at the common-source node and drives the source of $M_2$.\n  * Transistor $M_2$ has its gate tied to a fixed DC bias voltage $V_b$ (AC ground), functioning as a **common-gate amplifier**.\n* **Gain Polarity:**\n  * As $V_{\\text{in}}$ increases, the common-source voltage increases.\n  * This reduces the gate-to-source voltage of $M_2$ ($V_{GS2} = V_b - V_S$), reducing the drain current $I_{D2}$.\n  * A lower current through $R_D$ causes the output voltage $V_{\\text{out}} = V_{DD} - I_{D2}R_D$ to rise.\n  * Therefore, the circuit is a **non-inverting amplifier** ($A_v > 0$).\n\n---\n\n### 2. DC (Large-Signal) Operating Point\n\nAssuming transistors $M_1$ and $M_2$ are matched:\n\n1. **Bias Current:**\n   * When $V_{\\text{in, DC}} = V_b$, the tail current $I_1$ divides equally:\n     $$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n2. **DC Output Voltage:**\n   $$V_{\\text{out, DC}} = V_{DD} - \\frac{I_1}{2} R_D$$\n3. **Saturation Conditions:**\n   * For $M_1$: Drain is directly tied to $V_{DD}$, so it easily remains in saturation as long as:\n     $$V_{\\text{in}} \\le V_{DD} + V_{TH1}$$\n   * For $M_2$:\n     $$V_{\\text{out}} \\ge V_b - V_{TH2} \\implies V_{DD} - \\frac{I_1}{2} R_D \\ge V_b - V_{TH2}$$\n   * For the tail current source $I_1$:\n     $$V_S = V_b - V_{GS2} \\ge V_{CS, \\min}$$\n\n---\n\n### 3. Small-Signal Voltage Gain\n\n#### A. Ideal Case (Neglecting Body Effect $g_{mb}$ and Channel-Length Modulation $\\lambda = 0$)\nLet the small-signal voltage at the common-source node be $v_s$.\n\n* Small-signal drain currents:\n  $$i_{d1} = g_{m1}(v_{\\text{in}} - v_s)$$\n  $$i_{d2} = g_{m2}(0 - v_s) = -g_{m2} v_s$$\n\n* Applying KCL at node $S$ (ideal tail current source means $i_{d1} + i_{d2} = 0$):\n  $$g_{m1}(v_{\\text{in}} - v_s) - g_{m2} v_s = 0 \\implies v_s = \\frac{g_{m1}}{g_{m1} + g_{m2}} v_{\\text{in}}$$\n\n* Since $M_1$ and $M_2$ are biased at the same current, $g_{m1} = g_{m2} = g_m$:\n  $$v_s = \\frac{1}{2} v_{\\text{in}}$$\n\n* The output voltage is:\n  $$v_{\\text{out}} = -i_{d2} R_D = -(-g_m v_s) R_D = g_m \\left(\\frac{1}{2} v_{\\text{in}}\\right) R_D$$\n\n* **Small-Signal Voltage Gain:**\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = +\\frac{1}{2} g_m R_D$$\n\n---\n\n#### B. Inclusion of the Body Effect ($g_{mb}$)\nBecause the sources of $M_1$ and $M_2$ are not tied to their bulk (typically grounded), body effect is present:\n\n* Currents become:\n  $$i_{d1} = g_{m1}(v_{\\text{in}} - v_s) - g_{mb1} v_s$$\n  $$i_{d2} = -(g_{m2} + g_{mb2}) v_s$$\n\n* KCL at node $S$:\n  $$v_s = \\frac{g_{m1}}{(g_{m1} + g_{mb1}) + (g_{m2} + g_{mb2})} v_{\\text{in}} = \\frac{g_m}{2(g_m + g_{mb})} v_{\\text{in}}$$\n\n* Output voltage:\n  $$v_{\\text{out}} = -i_{d2} R_D = (g_m + g_{mb}) v_s R_D = (g_m + g_{mb}) \\left[\\frac{g_m}{2(g_m + g_{mb})} v_{\\text{in}}\\right] R_D$$\n  $$A_v = +\\frac{1}{2} g_m R_D$$\n\n> **Key Insight:** For matched devices, **the body effect cancels out completely** in the voltage gain expression.\n\n---\n\n#### C. Effect of Finite Tail Current Source Output Resistance ($R_{SS}$)\nIf the tail source has a finite resistance $R_{SS}$:\n$$A_v = \\frac{g_m R_D}{2 + \\frac{1}{g_m R_{SS}}}$$\nAs $R_{SS} \\to \\infty$, this simplifies back to $\\frac{1}{2} g_m R_D$.\n\n---\n\n### 4. Input and Output Impedance\n\n1. **Input Impedance ($R_{\\text{in}}$):**\n   * Looking into the gate of $M_1$:\n     $$R_{\\text{in}} \\approx \\infty \\quad \\text{(at low frequencies)}$$\n\n2. **Output Impedance ($R_{\\text{out}}$):**\n   * Looking into the drain of $M_2$:\n     $$R_{\\text{out}} = R_D \\parallel R_{\\text{out}, M2}$$\n   * The impedance looking down into the drain of $M_2$ with degeneration resistance $R_S \\approx \\frac{1}{g_{m1}}$ is:\n     $$R_{\\text{out}, M2} \\approx r_{o2} + (1 + g_{m2} r_{o2}) \\frac{1}{g_{m1}} \\approx 2 r_{o2}$$\n   * Since typically $R_D \\ll 2 r_{o2}$:\n     $$R_{\\text{out}} \\approx R_D$$\n\n---\n\n### 5. High-Frequency Performance (Why use this circuit?)\n\nThis circuit provides an important high-frequency advantage: **the complete absence of the Miller effect**:\n\n1. **At $M_1$:** The drain is connected directly to AC ground ($V_{DD}$). Therefore, the gate-drain capacitance $C_{gd1}$ is tied between the input and AC ground. It does **not** experience Miller multiplication.\n2. **At $M_2$:** The gate is held at fixed bias $V_b$ (AC ground). Therefore, $C_{gd2}$ appears between the output node and AC ground, also avoiding Miller multiplication.\n3. **Poles:**\n   * **Node $S$:** The resistance looking into this node is low ($\\approx \\frac{1}{2g_m}$), placing the pole at node $S$ at very high frequencies.\n   * **Output Node:** The pole is governed primarily by $R_D (C_{gd2} + C_{db2} + C_L)$.\n\nBecause Miller capacitance multiplication is avoided, this architecture is widely used as a **wideband, non-inverting amplifier/buffer** in high-speed analog and RF designs.",
        "format": "markdown",
        "sha256": "ae10e9d8985f98bb9a66ad9e3e9268ac5c79ac684381ff8a733468b3e3ff3049"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower driving a common-gate stage (equivalently, a single-ended differential pair) and gives the correct non-inverting gain. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 7371,
        "total_tokens": 8482,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5480,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 7371,
        "total_tokens": 8482,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5480,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is an **asymmetrical, single-ended differential pair** (or a **source-coupled pair**), commonly used as a non-inverting amplifier or as a wideband buffer/gain stage. \n\nIt can be intuitively understood as a cascade of two stages:\n1. **$M_1$ acts as a Common-Drain (Source Follower)** stage.\n2. **$M_2$ acts as a Common-Gate** stage.\n\n---\n\n### 1. Qualitative Operation\n* **Input Signal ($V_{\\text{in}}$):** Applied to the gate of $M_1$.\n* **DC Bias ($V_b$):** Applied to the gate of $M_2$ (held at an AC ground).\n* **Operation:** \n  * When $V_{\\text{in}}$ increases, transistor $M_1$ turns on more strongly, drawing a larger fraction of the tail current $I_1$.\n  * Since the total tail current $I_1$ is constant ($I_{D1} + I_{D2} = I_1$), the current through $M_2$ ($I_{D2}$) must **decrease**.\n  * As $I_{D2}$ decreases, the voltage drop across $R_D$ decreases, causing the output voltage $V_{\\text{out}} = V_{DD} - I_{D2}R_D$ to **increase**.\n  * Therefore, the circuit operates as a **non-inverting amplifier** ($V_{\\text{out}}$ increases with $V_{\\text{in}}$).\n\n---\n\n### 2. Large-Signal / DC Operation\n\nAssuming $M_1$ and $M_2$ are matched transistors ($\\mu_n C_{\\text{ox}} W/L$ are equal) operating in saturation:\n\n* **Quiescent (Equilibrium) State ($V_{\\text{in}} = V_b$):**\n  $$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n  $$V_{\\text{out, DC}} = V_{DD} - \\frac{I_1 R_D}{2}$$\n  $$V_S = V_b - V_{GS2} = V_b - \\left(V_{TH} + \\sqrt{\\frac{I_1}{\\mu_n C_{\\text{ox}} (W/L)}}\\right)$$\n\n* **Limits of Operation:**\n  * When $V_{\\text{in}} \\gg V_b$: $M_1$ steers all current ($I_{D1} = I_1$), turning $M_2$ OFF ($I_{D2} = 0$).  \n    $$\\implies V_{\\text{out}} = V_{DD}$$\n  * When $V_{\\text{in}} \\ll V_b$: $M_2$ steers all current ($I_{D2} = I_1$), turning $M_1$ OFF.  \n    $$\\implies V_{\\text{out}} = V_{DD} - I_1 R_D$$\n\n* **Saturation Condition for $M_2$:**\n  To keep $M_2$ in the active/saturation region:\n  $$V_{DS2} \\ge V_{GS2} - V_{TH} \\implies V_{\\text{out}} \\ge V_b - V_{TH}$$\n\n---\n\n### 3. Small-Signal Analysis\n\nAssuming identical transistors ($g_{m1} = g_{m2} = g_m$) and ignoring channel-length modulation ($\\lambda = 0$) and body effect ($\\gamma = 0$):\n\n1. **Common-Source Node Voltage ($v_s$):**\n   Applying Kirchhoff's Current Law (KCL) at the shared source node:\n   $$g_{m1}(v_{\\text{in}} - v_s) + g_{m2}(0 - v_s) = 0$$\n   $$g_m (v_{\\text{in}} - v_s) = g_m v_s \\implies v_s = \\frac{1}{2} v_{\\text{in}}$$\n   *(Node $S$ acts as a source follower with a gain of $+1/2$.)*\n\n2. **Output Voltage ($v_{\\text{out}}$):**\n   The small-signal current flowing through $M_2$ to the output is:\n   $$i_{d2} = g_{m2}(v_{g2} - v_s) = g_m (0 - v_s) = -g_m \\left(\\frac{1}{2}v_{\\text{in}}\\right) = -\\frac{1}{2}g_m v_{\\text{in}}$$\n\n   The output voltage across $R_D$ is:\n   $$v_{\\text{out}} = -i_{d2} R_D = -\\left(-\\frac{1}{2} g_m v_{\\text{in}}\\right) R_D$$\n   $$v_{\\text{out}} = +\\frac{1}{2} g_m R_D v_{\\text{in}}$$\n\n3. **Small-Signal Voltage Gain ($A_v$):**\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = +\\frac{1}{2} g_m R_D$$\n\n*(Note: The gain is half that of a standard common-source amplifier because the input voltage is divided equally across the two gate-source junctions).*\n\n---\n\n### 4. Input and Output Impedance\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  $$R_{\\text{in}} = \\infty \\quad \\text{(at low frequencies, looking into the gate of } M_1\\text{)}$$\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  * Neglecting channel-length modulation:\n    $$R_{\\text{out}} \\approx R_D$$\n  * Including channel-length modulation ($r_{o1}, r_{o2}$):\n    The resistance looking down into the drain of $M_2$ is degenerated by the impedance at the source node $R_S \\approx \\frac{1}{g_{m1}}$:\n    $$R_{\\text{down}} \\approx r_{o2} + (1 + g_{m2} r_{o2}) \\frac{1}{g_{m1}} \\approx 2 r_{o2}$$\n    $$R_{\\text{out}} = R_D \\parallel R_{\\text{down}} \\approx R_D \\parallel (2r_{o2})$$\n\n---\n\n### 5. Key Advantages and Application Features\n\n1. **Absence of the Miller Effect (High Bandwidth):**\n   * The drain of $M_1$ is tied to AC ground ($V_{DD}$), so its gate-drain capacitance $C_{gd1}$ is connected directly to AC ground—**no Miller multiplication occurs**.\n   * $M_2$ is in a common-gate configuration, which inherently does not suffer from Miller multiplication.\n   * Consequently, this topology has a **significantly higher bandwidth** than a conventional non-inverting or inverting single-stage amplifier.\n\n2. **Non-Inverting Gain with High Input Impedance:**\n   Unlike a standard common-gate amplifier (which is non-inverting but has low input impedance $\\approx 1/g_m$), this circuit combines the **high input impedance** of a MOSFET gate with **non-inverting gain**.",
        "format": "markdown",
        "sha256": "e2caa9bd83672c69cbc29b7a42795ef2473216b7d77bfad5050048282fdfc530"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair as a source follower driving a common-gate stage, with M2 biased at Vb and output at its drain. Its non-inverting gain conclusion is consistent with the signal path.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3813,
        "total_tokens": 4924,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2170,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3813,
        "total_tokens": 4924,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2170,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **single-ended input, single-ended output differential amplifier**, which can also be viewed as a cascade of a **Common-Drain (source follower) stage driving a Common-Gate stage**.\n\n---\n\n### 1. Qualitative Operation\n\n* **Input ($V_{\\text{in}}$) increases:**\n  1. The gate-to-source voltage of $M_1$ increases, pulling more current into $M_1$ ($I_{D1} \\uparrow$).\n  2. Because the tail current source is constant ($I_1 = I_{D1} + I_{D2}$), the current through $M_2$ must decrease by the same amount ($I_{D2} \\downarrow$).\n  3. The voltage drop across the load resistor $R_D$ decreases:\n     $$V_{\\text{out}} = V_{DD} - I_{D2} R_D \\implies V_{\\text{out}} \\uparrow$$\n* **Result:** The circuit acts as a **non-inverting amplifier** ($A_v > 0$).\n\n---\n\n### 2. Large-Signal (DC) Characteristics\n\nAssuming both transistors are identical ($M_1 = M_2$) and operate in the saturation region:\n\n* **Equilibrium ($V_{\\text{in}} = V_b$):**\n  $$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n  $$V_{\\text{out, DC}} = V_{DD} - \\frac{I_1 R_D}{2}$$\n  The common-source node sits at:\n  $$V_S = V_b - V_{GS2} = V_b - \\left(V_{TH} + \\sqrt{\\frac{I_1}{\\mu_n C_{ox} (W/L)}}\\right)$$\n\n* **Limits:**\n  * **When $V_{\\text{in}} \\ll V_b$:** $M_1$ turns completely **OFF** ($I_{D1} = 0$), and $M_2$ carries the entire tail current ($I_{D2} = I_1$):\n    $$V_{\\text{out, min}} = V_{DD} - I_1 R_D$$\n  * **When $V_{\\text{in}} \\gg V_b$:** $M_1$ carries all the tail current ($I_{D1} = I_1$), and $M_2$ turns **OFF** ($I_{D2} = 0$):\n    $$V_{\\text{out, max}} = V_{DD}$$\n\n---\n\n### 3. Small-Signal Voltage Gain ($A_v$)\n\nAssume both transistors are biased symmetrically at the operating point ($g_{m1} = g_{m2} = g_m$) and neglect channel-length modulation ($\\lambda = 0$) and body effect ($\\gamma = 0$).\n\n#### Method 1: The Source Follower + Common-Gate View\n1. **Source Follower Stage ($M_1$):**\n   * The small-signal input $v_{\\text{in}}$ appears at the common source node $v_s$.\n   * Looking into the source of $M_2$, the impedance is $1/g_{m2}$.\n   * The small-signal voltage at the source node $v_s$ is determined by the voltage divider between $M_1$'s source impedance and the load presented by $M_2$:\n     $$v_s = v_{\\text{in}} \\cdot \\frac{\\frac{1}{g_{m2}}}{\\frac{1}{g_{m1}} + \\frac{1}{g_{m2}}} = \\frac{1}{2} v_{\\text{in}}$$\n\n2. **Common-Gate Stage ($M_2$):**\n   * Transistor $M_2$ has its gate at AC ground ($V_b = \\text{const}$).\n   * The input to this stage is applied at the source node ($v_s$):\n     $$i_{d2} = -g_{m2} v_s = -g_m \\left(\\frac{1}{2} v_{\\text{in}}\\right) = -\\frac{1}{2} g_m v_{\\text{in}}$$\n   * The small-signal output voltage is:\n     $$v_{\\text{out}} = -i_{d2} R_D = -\\left(-\\frac{1}{2} g_m v_{\\text{in}}\\right) R_D = +\\frac{1}{2} g_m R_D v_{\\text{in}}$$\n\n#### Voltage Gain:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = +\\frac{1}{2} g_m R_D$$\n\n*(Note: The gain is half of the standard fully-differential pair gain because the input is applied single-endedly and only one output branch is utilized).*\n\n---\n\n### 4. Input and Output Impedance\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  Looking into the gate of $M_1$:\n  $$R_{\\text{in}} \\approx \\infty \\quad \\text{(at low frequencies)}$$\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  Looking into the node $V_{\\text{out}}$:\n  $$R_{\\text{out}} = R_D \\parallel R_{\\text{out, M2}}$$\n  Since $R_{\\text{out, M2}} \\approx r_{o2} + (1 + g_m r_{o2})(R_S) \\gg R_D$:\n  $$R_{\\text{out}} \\approx R_D$$\n\n---\n\n### 5. High-Frequency Considerations\n\nThis topology has advantageous high-frequency behavior:\n1. **No Miller Effect on $M_1$:** The drain of $M_1$ is tied directly to $V_{DD}$ (an AC ground). Thus, $C_{gd1}$ is connected between the input and AC ground, eliminating the Miller multiplication of input capacitance.\n2. **No Miller Effect on $M_2$:** The gate of $M_2$ is tied to a constant bias voltage $V_b$ (AC ground), forming a common-gate amplifier which is inherently free of Miller feedback.\n\nConsequently, this configuration offers a **wide bandwidth**, making it suitable for high-frequency and RF non-inverting amplification.",
        "format": "markdown",
        "sha256": "511f1815bab3f2ac7f6443e79c08917e2551b9055a33af702720a38d16098534"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower-to-common-gate topology (also a source-coupled differential pair) and derives the non-inverting gain. The essential answer is correct; minor secondary details do not affect the score.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3591,
        "total_tokens": 4702,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 3591,
        "total_tokens": 4702,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the source follower (common-drain amplifier) shown in the figure can exhibit **inductive behavior** at high frequencies due to the interaction between the **gate-to-source capacitance ($C_{gs}$)** of transistor $M_1$ and the **source resistance ($R_S$)**.\n\n---\n\n### 1. Small-Signal Analysis\n\nTo calculate the output impedance, we apply a small-signal test voltage $V_t$ at the output node and determine the resulting test current $I_t$, setting the independent input source $V_{\\text{in}} = 0$.\n\n* The drain of $M_1$ is connected to AC ground ($V_{DD}$).\n* The current-source transistor $M_2$ presents a large output resistance ($r_{O2}$) in parallel with the output, which can be neglected for this high-frequency derivation to focus on $M_1$.\n* The gate of $M_1$ is connected to ground through resistor $R_S$.\n* The gate-to-source capacitance $C_{gs}$ is connected between the output ($V_{\\text{out}} = V_t$) and the gate ($V_g$).\n\n#### Step 1: Find Gate Voltage $V_g$\nUsing the voltage divider formed by $C_{gs}$ and $R_S$:\n$$V_g = V_t \\frac{R_S}{R_S + \\frac{1}{s C_{gs}}} = V_t \\frac{s R_S C_{gs}}{1 + s R_S C_{gs}}$$\n\n#### Step 2: Determine Gate-to-Source Voltage $V_{gs}$\n$$V_{gs} = V_g - V_t = V_t \\left( \\frac{s R_S C_{gs}}{1 + s R_S C_{gs}} - 1 \\right) = -\\frac{V_t}{1 + s R_S C_{gs}}$$\n\n#### Step 3: Calculate Test Current $I_t$\nThe total current $I_t$ entering the source node consists of the current from the dependent source ($-g_m V_{gs}$) and the current through $C_{gs}$:\n$$I_t = -g_m V_{gs} + (V_t - V_g) s C_{gs} = (g_m + s C_{gs})(V_t - V_g)$$\n\nSubstituting $(V_t - V_g) = -V_{gs} = \\frac{V_t}{1 + s R_S C_{gs}}$:\n$$I_t = (g_m + s C_{gs}) \\frac{V_t}{1 + s R_S C_{gs}}$$\n\n#### Step 4: Output Impedance $Z_{\\text{out}}(s)$\n$$Z_{\\text{out}}(s) = \\frac{V_t}{I_t} = \\frac{1 + s R_S C_{gs}}{g_m + s C_{gs}} = \\frac{1}{g_m} \\cdot \\frac{1 + s R_S C_{gs}}{1 + s \\frac{C_{gs}}{g_m}}$$\n\n---\n\n### 2. Equivalent Circuit: Synthesizing an Inductor\n\nWe can rewrite the output admittance $Y_{\\text{out}}(s) = \\frac{1}{Z_{\\text{out}}(s)}$ by separating it into two parallel branches:\n\n$$Y_{\\text{out}}(s) = \\frac{g_m}{1 + s R_S C_{gs}} + \\frac{s C_{gs}}{1 + s R_S C_{gs}} = \\frac{1}{\\frac{1}{g_m} + s \\left(\\frac{R_S C_{gs}}{g_m}\\right)} + \\frac{1}{R_S + \\frac{1}{s C_{gs}}}$$\n\nThis shows that the output admittance consists of two parallel branches:\n1. **Branch 1:** A resistor of value $\\frac{1}{g_m}$ in series with an **equivalent inductor**:\n   $$L_{\\text{eq}} = \\frac{R_S C_{gs}}{g_m}$$\n2. **Branch 2:** A resistor $R_S$ in series with capacitor $C_{gs}$.\n\nThe presence of $L_{\\text{eq}}$ explicitly accounts for the inductive nature of the output impedance.\n\n---\n\n### 3. Physical / Intuitive Explanation\n\nThe inductive effect can be understood from both magnitude and phase perspectives:\n\n1. **Impedance Increases with Frequency:**\n   * At **low frequencies**, $C_{gs}$ is an open circuit. The gate remains at AC ground ($V_g = 0$), so $V_{gs} = -V_t$. The transistor draws a current $g_m V_t$, yielding a low output resistance:\n     $$R_{\\text{out}} \\approx \\frac{1}{g_m}$$\n   * At **higher frequencies**, $C_{gs}$ begins to couple $V_t$ to the gate node. As $V_g$ tracks $V_t$, the magnitude $|V_{gs}| = |V_g - V_t|$ decreases. Because $|V_{gs}|$ is smaller, the transistor provides less current to absorb the voltage disturbance. Consequently, if $R_S > \\frac{1}{g_m}$, the output impedance **increases** from $\\frac{1}{g_m}$ toward $R_S$ as frequency increases—a classic property of an inductor ($Z = j\\omega L$).\n\n2. **Phase Lag:**\n   * The low-pass filter formed by $R_S$ and $C_{gs}$ introduces a phase shift: the gate voltage $V_g$ lags behind the source voltage $V_t$.\n   * As a result, the small-signal current drawn by the transistor lags the applied voltage $V_t$. In circuit theory, **current lagging voltage is the defining signature of an inductance**.\n\n---\n\n### Practical Consequence\nBecause the output impedance can be inductive, if the source follower drives a capacitive load $C_L$, the combination of $L_{\\text{eq}}$ and $C_L$ creates a resonant $RLC$ circuit. This can lead to **gain peaking** in the frequency response, **ringing** in the transient response, or even **instability and oscillation**.",
        "format": "markdown",
        "sha256": "845986e1bf770d1f6f75434bbbafda7e7b29cf73238981510dd1026c23253626"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It derives the correct output-impedance expression and explains that Cgs pulls the gate toward the source, moving Zout from about 1/gm to Rs and making it rise with frequency when Rs > 1/gm. The aside claiming the gate lags the source is inaccurate, but the core mechanism and conclusion are correct.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 5484,
        "total_tokens": 6567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4091,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 5484,
        "total_tokens": 6567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4091,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is an **NMOS source follower** (common-drain amplifier), where $M_1$ is the driver, $M_2$ is a current-source load, and $R_S$ represents the source resistance of the input signal $V_{\\text{in}}$.\n\nThe output impedance of this circuit can become **inductive** at high frequencies due to the interaction between the **source resistance $R_S$** and the **gate-source capacitance $C_{gs1}$** of transistor $M_1$.\n\n---\n\n### 1. Small-Signal Analysis\n\nTo find the output impedance $Z_{\\text{out}}$, we set the independent AC source to zero ($V_{\\text{in}} = 0$), apply a test voltage source $V_X$ at the output node, and determine the resulting current $I_X$. \n\nFor simplicity, let us neglect the channel-length modulation ($r_o \\to \\infty$), body effect, and gate-drain capacitance $C_{gd1}$ (its presence does not change the fundamental behavior). Transistor $M_2$ acts as an ideal current source, presenting an infinite (or very large) output resistance in parallel with $M_1$.\n\n```\n         (AC Ground)\n             |\n             Rs\n             |\n             o---- Gate (Vg)\n             |\n           ----- Cgs1\n           -----\n             |\nVx o---------o---- Source (Vx)\n             |\n           ( M1 ) gm*Vgs\n             |\n        (AC Ground)\n```\n\n1. **Gate Voltage ($V_g$):**\n   The gate is connected to ground through $R_S$, and to the source through $C_{gs1}$. The voltage divider formed by $R_S$ and $C_{gs1}$ gives:\n   $$V_g = V_X \\frac{R_S}{R_S + \\frac{1}{s C_{gs1}}} = V_X \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}}$$\n\n2. **Gate-to-Source Voltage ($V_{gs1}$):**\n   $$V_{gs1} = V_g - V_X = V_X \\left(\\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}} - 1\\right) = -\\frac{V_X}{1 + s R_S C_{gs1}}$$\n\n3. **Total Test Current ($I_X$):**\n   The current leaving the test source $V_X$ consists of:\n   * Current flowing into the gate through $C_{gs1}$:\n     $$I_{Cgs} = (V_X - V_g) s C_{gs1} = -V_{gs1} s C_{gs1}$$\n   * Current drawn by the controlled current source $g_{m1} V_{gs1}$ (which flows from drain to source, so the current flowing from source to drain is $-g_{m1} V_{gs1}$):\n     $$I_{\\text{channel}} = -g_{m1} V_{gs1}$$\n\n   Applying KCL at the output node:\n   $$I_X = I_{Cgs} + I_{\\text{channel}} = -(g_{m1} + s C_{gs1}) V_{gs1}$$\n\n   Substituting $V_{gs1}$:\n   $$I_X = (g_{m1} + s C_{gs1}) \\frac{V_X}{1 + s R_S C_{gs1}}$$\n\n4. **Output Impedance ($Z_{\\text{out}}$):**\n   $$Z_{\\text{out}}(s) = \\frac{V_X}{I_X} = \\frac{1 + s R_S C_{gs1}}{g_{m1} + s C_{gs1}} = \\frac{1}{g_{m1}} \\cdot \\frac{1 + s R_S C_{gs1}}{1 + s \\frac{C_{gs1}}{g_{m1}}}$$\n\n---\n\n### 2. Frequency Behavior and Inductive Nature\n\nFrom the expression for $Z_{\\text{out}}(s)$, we can identify a zero and a pole:\n* **Zero frequency:** $\\omega_z = \\frac{1}{R_S C_{gs1}}$\n* **Pole frequency:** $\\omega_p = \\frac{g_{m1}}{C_{gs1}} \\approx \\omega_T$\n\nIf the source resistance satisfies:\n$$R_S > \\frac{1}{g_{m1}}$$\nthen **$\\omega_z < \\omega_p$**.\n\n* **At low frequencies ($s \\to 0$):**\n  $$Z_{\\text{out}} \\approx \\frac{1}{g_{m1}}$$\n* **At high frequencies ($s \\to \\infty$):**\n  $$Z_{\\text{out}} \\approx R_S$$\n\nBecause $R_S > 1/g_{m1}$, the magnitude of the impedance **increases with frequency** (at $+20\\text{ dB/decade}$) in the frequency range $\\omega_z < \\omega < \\omega_p$, and its phase becomes **positive** (current lags voltage). An impedance whose magnitude rises with frequency and exhibits a positive phase behaves precisely like an **inductor**.\n\n---\n\n### 3. Equivalent Circuit Model\n\nMathematically, $Z_{\\text{out}}(s)$ can be decomposed into an exact equivalent network:\n$$Z_{\\text{out}}(s) = \\frac{1}{g_{m1}} + \\left[ \\left(R_S - \\frac{1}{g_{m1}}\\right) \\;\\Big\\parallel\\; sL \\right]$$\n\nwhere the equivalent inductance is:\n$$L = \\frac{C_{gs1}}{g_{m1}} \\left( R_S - \\frac{1}{g_{m1}} \\right)$$\n\nThis represents:\n1. A base resistor of value $1/g_{m1}$ in series with:\n2. The parallel combination of a resistor $\\left(R_S - \\frac{1}{g_{m1}}\\right)$ and an inductor $L$.\n\nAs long as $R_S > 1/g_{m1}$, both the equivalent inductance $L$ and the parallel resistance are positive and physical.\n\n---\n\n### 4. Physical / Intuitive Explanation\n\n* **At low frequencies:** $C_{gs1}$ acts as an open circuit. The gate is held firmly at AC ground by $R_S$. Any change $\\Delta V_{\\text{out}}$ produces an equal and opposite $\\Delta V_{gs} = -\\Delta V_{\\text{out}}$, generating a full corrective current $g_{m1} \\Delta V_{\\text{out}}$. Hence, the impedance is low: $R_{\\text{out}} \\approx 1/g_{m1}$.\n* **At higher frequencies:** $C_{gs1}$ starts conducting and couples the output voltage back to the gate. The gate voltage begins to follow the source voltage ($V_g \\to V_X$). Because the gate tracks the source, the differential drive $|V_{gs}| = |V_g - V_X|$ **decreases**. \n* With smaller $|V_{gs}|$, the transistor cannot draw as much current in response to the test voltage. Less current for the same voltage means the effective output impedance **rises**. \n* Because this feedback involves the low-pass delay of $R_S C_{gs1}$, the current response **lags** the applied voltage—the fundamental definition of an inductive effect.\n\n---\n\n### Practical Consequence\nIf this source follower drives a capacitive load $C_L$, the inductive output impedance interacts with $C_L$ to form an effective **$RLC$ resonant tank**, which can cause **peaking in the frequency response**, **ringing in the transient response**, or even **instability/oscillation**.",
        "format": "markdown",
        "sha256": "3e3c94e43b48d22bccc1d56833d1d3b178fcb14aea0f6565443f595362868738"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the output impedance. It explains the low-frequency 1/gm-to-high-frequency RS transition and shows that the impedance rises and is inductive when RS > 1/gm.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 7195,
        "total_tokens": 8278,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 7195,
        "total_tokens": 8278,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **source follower** (common-drain amplifier), where $M_1$ is the driver transistor and $M_2$ acts as a current-source load. \n\nThe output impedance can become **inductive** at high frequencies due to the interaction between the **source resistance ($R_S$)** at the gate and the **gate-to-source capacitance ($C_{gs1}$)** of transistor $M_1$.\n\n---\n\n### 1. Small-Signal Analysis\n\nTo find the output impedance $Z_{\\text{out}}$, we set the AC inputs to zero ($V_{\\text{in}} = 0$, $V_b = 0$) and apply a small-signal test voltage $V_x$ at the output node ($V_{\\text{out}}$). \n\nFor simplicity, let us neglect channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$) and the gate-drain capacitance $C_{gd1}$ (its presence can be lumped into $R_S$).\n\n```\n        AC Ground\n           |\n          [RS]\n           |\n     Vg ---+---||---+ (Cgs1)\n           |        |\n           |        |\n          M1        +--- Vx (Vout)\n                    |\n```\n\n1. **Gate Voltage ($V_g$):**  \n   The gate is tied to ground through $R_S$. The test voltage $V_x$ at the source couples to the gate through $C_{gs1}$, creating a voltage divider:\n   $$V_g = V_x \\frac{R_S}{R_S + \\frac{1}{s C_{gs1}}} = V_x \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}}$$\n\n2. **Gate-to-Source Voltage ($V_{gs1}$):**\n   $$V_{gs1} = V_g - V_x = V_x \\left( \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}} - 1 \\right) = -\\frac{V_x}{1 + s R_S C_{gs1}}$$\n\n3. **Current Drawn from the Test Source ($I_x$):**  \n   The current flowing into the source node consists of the transistor's controlled current (flowing into the drain) and the displacement current through $C_{gs1}$:\n   $$I_x = -g_{m1}V_{gs1} + s C_{gs1}(V_x - V_g)$$\n   $$I_x = \\frac{g_{m1} V_x}{1 + s R_S C_{gs1}} + \\frac{s C_{gs1} V_x}{1 + s R_S C_{gs1}} = V_x \\frac{g_{m1} + s C_{gs1}}{1 + s R_S C_{gs1}}$$\n\n4. **Output Impedance ($Z_{\\text{out}}$):**\n   $$Z_{\\text{out}}(s) = \\frac{V_x}{I_x} = \\frac{1 + s R_S C_{gs1}}{g_{m1} + s C_{gs1}}$$\n\n---\n\n### 2. Condition for Inductive Behavior\n\nSubstituting $s = j\\omega$ and rationalizing the expression:\n$$Z_{\\text{out}}(j\\omega) = \\frac{1 + j\\omega R_S C_{gs1}}{g_{m1} + j\\omega C_{gs1}} \\cdot \\frac{g_{m1} - j\\omega C_{gs1}}{g_{m1} - j\\omega C_{gs1}}$$\n\n$$Z_{\\text{out}}(j\\omega) = \\frac{g_{m1} + \\omega^2 R_S C_{gs1}^2}{g_{m1}^2 + \\omega^2 C_{gs1}^2} + j \\frac{\\omega C_{gs1}(g_{m1} R_S - 1)}{g_{m1}^2 + \\omega^2 C_{gs1}^2}$$\n\nThe imaginary part of the impedance is:\n$$\\text{Im}\\{Z_{\\text{out}}\\} = \\frac{\\omega C_{gs1}(g_{m1} R_S - 1)}{g_{m1}^2 + \\omega^2 C_{gs1}^2}$$\n\n* If **$R_S > \\frac{1}{g_{m1}}$** (i.e., $g_{m1} R_S > 1$), then:\n  $$\\text{Im}\\{Z_{\\text{out}}\\} > 0 \\quad \\text{for all } \\omega > 0$$\nA positive imaginary component signifies that the **output impedance is inductive**.\n\nNotice the frequency limits:\n* **Low frequency ($\\omega \\to 0$):** $Z_{\\text{out}} \\approx \\frac{1}{g_{m1}}$\n* **High frequency ($\\omega \\to \\infty$):** $Z_{\\text{out}} \\approx R_S$\n\nSince $R_S > 1/g_{m1}$, the magnitude of $Z_{\\text{out}}$ **increases with frequency**, which is typical of an inductive impedance.\n\n---\n\n### 3. Equivalent Circuit Model\n\nThe output admittance $Y_{\\text{out}}(s)$ can be decomposed into two parallel branches:\n$$Y_{\\text{out}}(s) = \\frac{g_{m1}}{1 + s R_S C_{gs1}} + \\frac{s C_{gs1}}{1 + s R_S C_{gs1}} = \\frac{1}{\\frac{1}{g_{m1}} + s \\frac{R_S C_{gs1}}{g_{m1}}} + \\frac{1}{R_S + \\frac{1}{s C_{gs1}}}$$\n\nThis shows that the output impedance is modeled by:\n1. A **resistor** of value $R_1 = \\frac{1}{g_{m1}}$ in series with an **equivalent inductor**:\n   $$L_{\\text{eq}} = \\frac{R_S C_{gs1}}{g_{m1}}$$\n2. In parallel with a series $R_S \\text{–} C_{gs1}$ branch.\n\nAt moderate frequencies ($\\omega \\ll g_{m1}/C_{gs1}$), the first branch dominates, making the output look essentially like a resistor $\\frac{1}{g_{m1}}$ in series with an inductor $L_{\\text{eq}}$.\n\n---\n\n### 4. Physical / Intuitive Explanation\n\n* **At DC / Low Frequencies:**  \n  $C_{gs1}$ is effectively an open circuit, keeping the gate firmly at AC ground ($V_g = 0$). When a voltage $V_x$ appears at the source, $V_{gs1} = -V_x$ changes instantaneously without attenuation, and the transistor draws a large restoring current $g_{m1} V_x$. The output resistance is small: $1/g_{m1}$.\n\n* **At High Frequencies:**  \n  $C_{gs1}$ begins conducting, coupling $V_x$ into the gate. Because of the resistance $R_S$, the gate voltage starts to **track** $V_x$. \n  * As $V_g$ tracks $V_x$, the magnitude of $V_{gs1} = V_g - V_x$ decreases, so the transistor produces **less current** for the same applied voltage, increasing the effective impedance.\n  * More importantly, the $R_S C_{gs1}$ low-pass path to ground causes a **phase lag** in the gate voltage relative to the source, which in turn causes the small-signal drain current to **lag** the applied voltage $V_x$. Current lagging voltage is the defining physical property of an **inductor**.\n\n---\n\n### Practical Consequence\nBecause the output impedance has an inductive component, connecting a **capacitive load ($C_L$)** at $V_{\\text{out}}$ creates an effective parallel/series $RLC$ circuit. This can lead to **peaking in the frequency response**, **ringing in the step response**, or even **instability and oscillation**.",
        "format": "markdown",
        "sha256": "1042bacba1852a11ef72c9f934a209e3865cfec4ad35e2c55a5db8f387324eaa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the stated output-impedance expression. It captures the transition from 1/gm1 to RS and the inductive rise when RS > 1/gm1, satisfying the full-credit rule.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 7124,
        "total_tokens": 8207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 7124,
        "total_tokens": 8207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure, covering the **circuit topology**, **DC operating point**, **small-signal performance**, and **feedback/stability analysis**.\n\n---\n\n### 1. Circuit Description and Topology\n\n* **Input:** Current source $I_{\\text{in}}$ applied at node $X$.\n* **Forward Path:** Transistor $M_1$ operates as a **common-source amplifier** with a resistive load $R_{D1}$.\n* **Feedback Path:** Transistor $M_2$ senses the output voltage $V_{\\text{out}}$ at its gate and feeds back a current into node $X$ through its drain.\n* **Configuration:** This forms a **shunt–shunt feedback topology** (current input, voltage output), acting nominally as a **transimpedance amplifier**.\n\n---\n\n### 2. Large-Signal (DC) Operating Point\n\nAssuming both $M_1$ and $M_2$ operate in the **saturation region** and neglecting channel-length modulation ($\\lambda = 0$):\n\n1. **Output Voltage ($V_{\\text{out}}$):**\n   Since the gate of $M_1$ draws no DC current, all of $I_{\\text{in}}$ flows through $M_2$:\n   $$I_{D2} = I_{\\text{in}} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{GS2} - V_{TH2})^2$$\n   Since $V_{GS2} = V_{\\text{out}}$:\n   $$V_{\\text{out}} = V_{TH2} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{ox} (W/L)_2}}$$\n\n2. **Drain Current of $M_1$ ($I_{D1}$):**\n   The DC current through $R_{D1}$ is:\n   $$I_{D1} = \\frac{V_{DD} - V_{\\text{out}}}{R_{D1}}$$\n\n3. **Node $X$ Voltage ($V_X$):**\n   Since $M_1$ is in saturation with $V_{GS1} = V_X$:\n   $$I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_X - V_{TH1})^2$$\n   $$V_X = V_{TH1} + \\sqrt{\\frac{2 I_{D1}}{\\mu_n C_{ox} (W/L)_1}} = V_{TH1} + \\sqrt{\\frac{2 (V_{DD} - V_{\\text{out}})}{\\mu_n C_{ox} (W/L)_1 R_{D1}}}$$\n\n4. **Conditions for Saturation:**\n   * For $M_1$: $V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_{\\text{out}} \\ge V_X - V_{TH1}$\n   * For $M_2$: $V_{DS2} \\ge V_{GS2} - V_{TH2} \\implies V_X \\ge V_{\\text{out}} - V_{TH2}$\n\n   Combining these yields the required range for $V_X$:\n   $$V_{\\text{out}} - V_{TH2} \\le V_X \\le V_{\\text{out}} + V_{TH1}$$\n\n---\n\n### 3. Small-Signal Analysis\n\nLet the small-signal parameters of $M_1$ and $M_2$ be $g_{m1}, r_{O1}$ and $g_{m2}, r_{O2}$, respectively. Let $R_L = R_{D1} \\parallel r_{O1}$.\n\n#### A. Governing KCL Equations\n1. **At Node $X$:**\n   $$i_{\\text{in}} = i_{d2} = g_{m2} v_{\\text{out}} + \\frac{v_x}{r_{O2}} \\quad \\implies \\quad v_x = r_{O2} (i_{\\text{in}} - g_{m2} v_{\\text{out}})$$\n\n2. **At Node $V_{\\text{out}}$:**\n   $$\\frac{v_{\\text{out}}}{R_L} + g_{m1} v_x = 0 \\quad \\implies \\quad v_x = -\\frac{v_{\\text{out}}}{g_{m1} R_L}$$\n\n---\n\n#### B. Transimpedance Gain ($R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)\nEquating the two expressions for $v_x$:\n$$-\\frac{v_{\\text{out}}}{g_{m1} R_L} = r_{O2} (i_{\\text{in}} - g_{m2} v_{\\text{out}})$$\n$$i_{\\text{in}} = v_{\\text{out}} \\left( g_{m2} - \\frac{1}{g_{m1} r_{O2} R_L} \\right)$$\n\nTherefore:\n$$\\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2} - \\frac{1}{g_{m1} r_{O2} (R_{D1} \\parallel r_{O1})}}$$\n\n* **Ideal Case ($\\lambda = 0 \\implies r_{O1}, r_{O2} \\to \\infty$):**\n  $$\\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2}}$$\n\n---\n\n#### C. Input Impedance ($R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}}$)\nUsing $v_x = -\\frac{v_{\\text{out}}}{g_{m1} R_L}$:\n$$R_{\\text{in}} = -\\frac{1}{g_{m1} R_L \\left( g_{m2} - \\frac{1}{g_{m1} r_{O2} R_L} \\right)} = -\\frac{r_{O2}}{g_{m1} g_{m2} r_{O2} (R_{D1} \\parallel r_{O1}) - 1}$$\n\n* **Ideal Case ($\\lambda = 0$):**\n  $$R_{\\text{in}} = -\\frac{1}{g_{m1} g_{m2} R_{D1}}$$\n\n> **Key Observation:** The input impedance is **strictly negative**.\n\n---\n\n#### D. Output Impedance ($R_{\\text{out}}$)\nSet the independent input source $i_{\\text{in}} = 0$, apply a test voltage $v_t$ at $V_{\\text{out}}$, and find the test current $i_t$:\n1. At Node $X$: $0 = g_{m2} v_t + \\frac{v_x}{r_{O2}} \\implies v_x = -g_{m2} r_{O2} v_t$\n2. At Node $V_{\\text{out}}$:\n   $$i_t = \\frac{v_t}{R_{D1} \\parallel r_{O1}} + g_{m1} v_x = v_t \\left( \\frac{1}{R_L} - g_{m1} g_{m2} r_{O2} \\right)$$\n\nTherefore:\n$$R_{\\text{out}} = \\frac{R_L}{1 - g_{m1} g_{m2} r_{O2} (R_{D1} \\parallel r_{O1})}$$\n\n* Since typically $g_{m1} g_{m2} r_{O2} R_L \\gg 1$, $R_{\\text{out}}$ is also **negative**:\n  $$R_{\\text{out}} \\approx -\\frac{1}{g_{m1} g_{m2} r_{O2}}$$\n\n---\n\n### 4. Feedback Nature and Stability\n\n#### A. Feedback Polarity\nLet us trace a perturbation through the loop:\n1. Assume $V_X$ increases ($\\Delta V_X > 0$).\n2. Due to the inverting common-source stage $M_1$, $V_{\\text{out}}$ decreases:\n   $$\\Delta V_{\\text{out}} \\approx -g_{m1} R_{D1} \\Delta V_X < 0$$\n3. Since $V_{\\text{out}}$ drives the gate of $M_2$, $V_{GS2}$ decreases, causing $M_2$ to draw **less current** from node $X$:\n   $$\\Delta I_{D2} = g_{m2} \\Delta V_{\\text{out}} < 0$$\n4. With an ideal current source supplying $I_{\\text{in}}$, the reduction in $I_{D2}$ forces the excess charge to accumulate at node $X$, pushing $V_X$ **even higher**.\n\n**Conclusion:** The feedback is **positive** (regenerative).\n\n---\n\n#### B. Loop Gain and Dynamic Stability\nBreaking the loop at the gate of $M_1$:\n* Forward gain: $A_v = -g_{m1} R_L$\n* Feedback factor: $I_{d2} / V_{\\text{out}} = g_{m2}$\n* Returning voltage developed across node $X$ resistance ($r_{O2}$):\n  $$T = + g_{m1} g_{m2} (R_{D1} \\parallel r_{O1}) r_{O2}$$\n\nSince $T > 1$:\n* If parasitic capacitances $C_X$ and $C_{\\text{out}}$ are included at nodes $X$ and $V_{\\text{out}}$, the characteristic equation is:\n  $$s^2 + \\left( \\frac{1}{r_{O2} C_X} + \\frac{1}{R_L C_{\\text{out}}} \\right) s + \\frac{1 - T}{r_{O2} R_L C_X C_{\\text{out}}} = 0$$\n* Because $T > 1$, the constant term is negative, which implies the system has **one positive real pole (Right-Half Plane pole)**.\n\n---\n\n### 5. Summary\n\n| Parameter | Exact Expression | Approximated ($\\lambda = 0$) |\n| :--- | :--- | :--- |\n| **Transimpedance Gain ($V_{\\text{out}}/I_{\\text{in}}$)** | $\\dfrac{1}{g_{m2} - \\dfrac{1}{g_{m1} r_{O2} (R_{D1} \\parallel r_{O1})}}$ | $+\\dfrac{1}{g_{m2}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $-\\dfrac{r_{O2}}{g_{m1} g_{m2} r_{O2} (R_{D1} \\parallel r_{O1}) - 1}$ | $-\\dfrac{1}{g_{m1} g_{m2} R_{D1}}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\dfrac{R_L}{1 - g_{m1} g_{m2} r_{O2} R_L}$ | $\\approx -\\dfrac{1}{g_{m1} g_{m2} r_{O2}} \\to 0$ |\n| **Loop Stability** | Open-loop **unstable** under ideal current drive (requires finite source resistance $R_S < \\frac{1}{g_{m1} g_{m2} R_L}$ to stabilize). | |",
        "format": "markdown",
        "sha256": "a7343cccb19f24b0bbba80608ef42a0daf929c945ffb78ae3062126bdf67a5c9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2’s gate is tied to Vout, traces the regenerative positive-feedback loop, and recognizes its consequences: negative input resistance and instability under current drive. These satisfy the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 15514,
        "total_tokens": 16633,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12916,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 15514,
        "total_tokens": 16633,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12916,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a classic problem in analog CMOS design (frequently featured in Behzad Razavi’s *Design of Analog CMOS Integrated Circuits*). It resembles a **shunt-shunt feedback amplifier** (transimpedance amplifier), but with a critical flaw in feedback polarity.\n\n---\n\n### 1. Circuit Topology Overview\n\n* **Forward Path ($M_1$):**\n  * Transistor $M_1$ and resistor $R_{D1}$ form a standard **Common-Source (CS)** amplifier.\n  * Input is applied at the gate (node $X$), and the output is taken at the drain ($V_{\\text{out}}$).\n  * Small-signal voltage gain of this stage:\n    $$A_{v1} = \\frac{v_{\\text{out}}}{v_X} = -g_{m1}(R_{D1} \\parallel r_{o1})$$\n    *(Note the $180^\\circ$ phase inversion / negative sign).*\n\n* **Feedback Path ($M_2$):**\n  * Transistor $M_2$ has its gate tied to $V_{\\text{out}}$ (sampling output voltage) and its drain tied to node $X$ (returning a feedback current to the input node).\n  * This is a **shunt-shunt** (voltage-current) feedback connection.\n\n* **Input Source ($I_{\\text{in}}$):**\n  * An input current is injected into node $X$.\n\n---\n\n### 2. Feedback Polarity Analysis\n\nTo determine whether the feedback is **negative** or **positive**, let us trace a small perturbation through the loop:\n\n1. Assume a positive voltage perturbation at node $X$ ($\\Delta V_X > 0$).\n2. Since $M_1$ is an inverting (common-source) amplifier, its drain current increases, causing $V_{\\text{out}}$ to drop:\n   $$\\Delta V_{\\text{out}} \\approx -g_{m1}(R_{D1} \\parallel r_{o1}) \\Delta V_X < 0$$\n3. The decrease in $V_{\\text{out}}$ lowers the gate-to-source voltage of $M_2$ ($\\Delta V_{GS2} < 0$).\n4. As $V_{GS2}$ drops, the drain current drawn by $M_2$ **decreases**:\n   $$\\Delta I_{D2} = g_{m2} \\Delta V_{\\text{out}} < 0$$\n5. By Kirchhoff's Current Law (KCL) at node $X$, the net current available to charge the capacitance at node $X$ is:\n   $$I_{\\text{cap}} = I_{\\text{in}} - I_{D2}$$\n   Because $M_2$ is drawing **less** current away from node $X$, node $X$ charges up further, causing $V_X$ to **increase even more**.\n\n**Conclusion:** The feedback **reinforces** the initial perturbation. The feedback is strictly **POSITIVE**.\n\n---\n\n### 3. Loop Gain ($T$)\n\nBreaking the loop at the gate of $M_2$:\n1. Apply a test voltage $v_t$ at the gate of $M_2$.\n2. Transistor $M_2$ draws a small-signal current:\n   $$i_{d2} = g_{m2} v_t$$\n3. Assuming the input source has an internal parallel resistance $R_S$ (where $R_S \\to \\infty$ for an ideal current source), the total impedance at node $X$ is $R_X = R_S \\parallel r_{o2}$. The resulting voltage at node $X$ is:\n   $$v_X = -i_{d2} R_X = -g_{m2} (R_S \\parallel r_{o2}) v_t$$\n4. The voltage arriving at the output is:\n   $$v_{\\text{out}} = -g_{m1}(R_{D1} \\parallel r_{o1}) v_X = +g_{m1} g_{m2} (R_S \\parallel r_{o2})(R_{D1} \\parallel r_{o1}) v_t$$\n\nThe loop gain is therefore:\n$$T = \\frac{v_{\\text{out}}}{v_t} = +g_{m1} g_{m2} (R_S \\parallel r_{o2})(R_{D1} \\parallel r_{o1}) > 0$$\n\nBecause $T > 0$ with no intrinsic phase inversion, the feedback remains regenerative.\n\n---\n\n### 4. Input Impedance & Negative Resistance\n\nApplying a test voltage $v_x$ at node $X$ to calculate the input admittance $Y_{\\text{in}}$ looking into the circuit:\n$$v_{\\text{out}} = -g_{m1}(R_{D1} \\parallel r_{o1}) v_x$$\nThe current drawn from node $X$ by the circuit is:\n$$i_x = i_{d2} = g_{m2} v_{\\text{out}} + \\frac{v_x}{r_{o2}} = \\left[\\frac{1}{r_{o2}} - g_{m1} g_{m2}(R_{D1} \\parallel r_{o1})\\right] v_x$$\n\nThus, the input resistance $R_{\\text{in}} = v_x / i_x$ is:\n$$R_{\\text{in}} = \\frac{1}{\\frac{1}{r_{o2}} - g_{m1} g_{m2}(R_{D1} \\parallel r_{o1})}$$\n\nSince typically $g_{m1} g_{m2}(R_{D1} \\parallel r_{o1}) \\gg \\frac{1}{r_{o2}}$, the circuit presents a **negative input resistance**:\n$$R_{\\text{in}} \\approx -\\frac{1}{g_{m1} g_{m2}(R_{D1} \\parallel r_{o1})} < 0$$\n\n---\n\n### 5. Stability & Large-Signal Behavior\n\n#### Case A: Driven by an Ideal Current Source ($R_S = \\infty$)\n* The net resistance at node $X$ is negative ($R_{\\text{total}} = R_{\\text{in}} < 0$).\n* With node capacitance $C_X$, the pole is located at:\n  $$s_p = -\\frac{1}{R_{\\text{total}} C_X} = +\\frac{1}{|R_{\\text{in}}| C_X} > 0$$\n  This pole lies in the **Right-Half Plane (RHP)**, making the circuit **unconditionally unstable** in linear mode.\n* **Latching Behavior:** The circuit acts as a **bistable latch**:\n  * **State 1:** $V_X$ is driven high $\\implies M_1$ conducts heavily, pulling $V_{\\text{out}} \\approx 0\\text{ V}$ (deep triode). Since $V_{\\text{out}} < V_{TH2}$, $M_2$ is turned completely **OFF**, allowing $I_{\\text{in}}$ to keep $V_X$ high.\n  * **State 2:** $V_X$ is driven low ($< V_{TH1}$) $\\implies M_1$ turns **OFF**, causing $V_{\\text{out}} \\approx V_{DD}$. With $V_{GS2} = V_{DD}$, $M_2$ turns heavily **ON**, clamping $V_X$ to near ground.\n\n#### Case B: Driven by a Finite Source Resistance ($R_S < |R_{\\text{in}}|$)\n* If the source resistance is sufficiently small such that the loop gain $T < 1$:\n  $$R_S < \\frac{1}{g_{m1} g_{m2}(R_{D1} \\parallel r_{o1})}$$\n  the net parallel resistance at node $X$ becomes positive:\n  $$R_{\\text{total}} = R_S \\parallel R_{\\text{in}} = \\frac{R_S |R_{\\text{in}}|}{|R_{\\text{in}}| - R_S} > 0$$\n* The circuit is stable and operates as a **regeneratively boosted amplifier** (Q-enhancement), yielding a very high transimpedance gain:\n  $$\\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{-g_{m1}(R_{D1} \\parallel r_{o1}) R_S}{1 - g_{m1} g_{m2}(R_{D1} \\parallel r_{o1}) R_S}$$\n\n---\n\n### Summary\n\n| Parameter / Feature | Value / Characteristic |\n| :--- | :--- |\n| **Topology** | Shunt-Shunt (Voltage-Current) Feedback |\n| **Feedback Polarity** | **Positive (Regenerative)** |\n| **Input Resistance ($R_{\\text{in}}$)** | Negative: $\\approx -\\frac{1}{g_{m1} g_{m2} (R_{D1} \\parallel r_{o1})}$ |\n| **Small-Signal Stability** | Unstable for ideal current input ($R_S = \\infty$); stable only if $R_S < \\|R_{\\text{in}}\\|$ |\n| **Application / Function** | Bistable latch / Schmitt trigger, or negative-resistance generator (for oscillator/Q-enhancement circuits) |",
        "format": "markdown",
        "sha256": "2bf0c5f2355aa2bb0b535d3cab05360956f9d709a88807d4d9919025623310ce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2 as controlled by Vout rather than diode-connected, traces the positive-feedback loop, and states its negative input resistance and instability/latching consequence.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 12774,
        "total_tokens": 13893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10687,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 12774,
        "total_tokens": 13893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10687,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a comprehensive analysis of the circuit shown in the figure, covering its **topology**, **feedback polarity**, **small-signal behavior**, **stability**, and **large-signal/DC characteristics**.\n\n---\n\n### 1. Circuit Overview and Topology\n\n* **Input:** An input current source $I_{\\text{in}}$ is connected to node $X$.\n* **Forward Stage ($M_1$):** Transistor $M_1$ is an NMOS configured as a **common-source (CS) amplifier** with a resistive drain load $R_{\\text{D1}}$.\n* **Feedback Stage ($M_2$):** Transistor $M_2$ is also an NMOS whose gate is tied to the output $V_{\\text{out}}$ and whose drain is connected back to the input node $X$.\n* **Feedback Mechanism:** The output voltage $V_{\\text{out}}$ is sensed and converted into a current by $M_2$ that is fed back into node $X$. This forms a **transimpedance (current-in, voltage-out)** closed-loop configuration.\n\n---\n\n### 2. Feedback Polarity Analysis\n\nTo determine whether the feedback is positive or negative, let us trace a small perturbation around the loop:\n\n1. Assume the voltage at node $X$ increases: $V_X \\uparrow$.\n2. As $V_{GS1} = V_X$ increases, the drain current of $M_1$ increases: $I_{D1} \\uparrow$.\n3. Since $V_{\\text{out}} = V_{DD} - I_{D1} R_{\\text{D1}}$, the output voltage decreases: $V_{\\text{out}} \\downarrow$.\n4. The output is connected to the gate of $M_2$ ($V_{GS2} = V_{\\text{out}}$), so a decrease in $V_{\\text{out}}$ decreases the current drawn by $M_2$: $I_{D2} \\downarrow$.\n5. Because $M_2$ pulls current *away* from node $X$ to ground, a decrease in $I_{D2}$ means less current is pulled from node $X$.\n6. With $I_{\\text{in}}$ constant, the net current charging node $X$ increases, driving $V_X$ even higher: $V_X \\uparrow\\uparrow$.\n\nBecause an initial increase in $V_X$ results in a further increase in $V_X$, the feedback is **positive (regenerative)**.\n\n> **Intuitive Check:** The loop consists of two inverting common-source stages in cascade ($M_1$ and $M_2$). Each CS stage provides an inverting gain ($\\sim -180^\\circ$). The total phase shift around the loop is:\n> $$\\angle T \\approx (-180^\\circ) \\times (-180^\\circ) = +360^\\circ \\equiv 0^\\circ$$\n> which confirms **positive feedback**.\n\n---\n\n### 3. Small-Signal Analysis\n\nAssuming both transistors are biased in the active (saturation) region with transconductances $g_{m1}, g_{m2}$ and output resistances $r_{O1}, r_{O2}$:\n\n#### A. Loop Gain ($T$)\nBreak the loop at the gate of $M_1$ and apply a test voltage $v_t$:\n1. The voltage at $V_{\\text{out}}$ is:\n   $$v_{\\text{out}} = -g_{m1} (R_{\\text{D1}} \\parallel r_{O1}) v_t$$\n2. The gate of $M_2$ receives $v_{\\text{out}}$, producing a small-signal drain current:\n   $$i_{d2} = g_{m2} v_{\\text{out}} = -g_{m1} g_{m2} (R_{\\text{D1}} \\parallel r_{O1}) v_t$$\n3. Looking into node $X$, the impedance is the output resistance of $M_2$, $R_X = r_{O2}$ (assuming an ideal input current source with $r_{\\text{in}} \\to \\infty$).\n4. By KCL at node $X$, the returned voltage $v_{X,\\text{ret}}$ is:\n   $$v_{X,\\text{ret}} = -i_{d2} \\cdot r_{O2} = + g_{m1} g_{m2} (R_{\\text{D1}} \\parallel r_{O1}) r_{O2} \\cdot v_t$$\n\nThus, the loop transmission is positive:\n$$T = \\frac{v_{X,\\text{ret}}}{v_t} = g_{m1} g_{m2} (R_{\\text{D1}} \\parallel r_{O1}) r_{O2}$$\n\n#### B. Closed-Loop Transimpedance Gain ($Z_T = v_{\\text{out}} / i_{\\text{in}}$)\nUsing KCL at nodes $X$ and $V_{\\text{out}}$ (defining $R_L = R_{\\text{D1}} \\parallel r_{O1}$):\n* **At node $X$:** $i_{\\text{in}} = \\frac{v_X}{r_{O2}} + g_{m2} v_{\\text{out}}$\n* **At node $V_{\\text{out}}$:** $v_{\\text{out}} = -g_{m1} R_L v_X \\implies v_X = -\\frac{v_{\\text{out}}}{g_{m1} R_L}$\n\nSubstituting $v_X$ into the first equation:\n$$i_{\\text{in}} = -\\frac{v_{\\text{out}}}{g_{m1} R_L r_{O2}} + g_{m2} v_{\\text{out}} = v_{\\text{out}} \\left( \\frac{g_{m1} g_{m2} R_L r_{O2} - 1}{g_{m1} R_L r_{O2}} \\right)$$\n\n$$\\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{g_{m1} R_L r_{O2}}{T - 1} \\approx \\frac{1}{g_{m2}} \\quad (\\text{for } T \\gg 1)$$\n\n#### C. Input Impedance ($R_{\\text{in}}$ at node $X$)\nApply a test voltage $v_x$ at node $X$ (with $i_{\\text{in}} = 0$):\n* $v_{\\text{out}} = -g_{m1} R_L v_x$\n* $i_x = \\frac{v_x}{r_{O2}} + g_{m2} v_{\\text{out}} = v_x \\left( \\frac{1}{r_{O2}} - g_{m1} g_{m2} R_L \\right)$\n\n$$R_{\\text{in}} = \\frac{v_x}{i_x} = \\frac{r_{O2}}{1 - g_{m1} g_{m2} R_L r_{O2}} = \\frac{r_{O2}}{1 - T}$$\n\nSince typically $T \\gg 1$, the input impedance is **negative**:\n$$R_{\\text{in}} \\approx -\\frac{1}{g_{m1} g_{m2} R_L} < 0$$\nThis circuit acts as a **Negative Impedance Converter (NIC)** at node $X$.\n\n---\n\n### 4. Stability Analysis\n\nTo check dynamic stability, let $C_X$ and $C_{\\text{out}}$ denote the lumped parasitic capacitances at node $X$ and node $V_{\\text{out}}$, respectively.\n\nThe system equations in the frequency domain are:\n$$\\begin{cases}\nI_{\\text{in}}(s) = V_X(s)(sC_X + g_{o2}) + g_{m2}V_{\\text{out}}(s) \\\\\n0 = g_{m1}V_X(s) + V_{\\text{out}}(s)(sC_{\\text{out}} + G_L)\n\\end{cases}$$\n\nThe characteristic equation (denominator of the transfer function) is:\n$$D(s) = s^2 + \\left( \\frac{1}{C_{\\text{out}} R_L} + \\frac{1}{C_X r_{O2}} \\right) s + \\frac{1 - T}{C_X C_{\\text{out}} R_L r_{O2}} = 0$$\n\n* In standard CMOS implementations, the intrinsic gain per stage $g_m r_O \\gg 1$, so $T = g_{m1} g_{m2} R_L r_{O2} \\gg 1$.\n* As a result, the constant coefficient $\\frac{1 - T}{C_X C_{\\text{out}} R_L r_{O2}}$ is **negative**.\n* By Descartes' Rule of Signs / Routh-Hurwitz criteria, a quadratic polynomial with a negative constant term has **one real pole in the Right-Half Plane (RHP)** ($s_1 > 0$).\n\n**Conclusion on Stability:** The small-signal equilibrium where both transistors are in saturation is **unconditionally unstable**. Any tiny noise or perturbation will trigger a runaway regenerative process.\n\n---\n\n### 5. Large-Signal / DC Behavior\n\nBecause the saturation operating point is an unstable saddle point, the circuit acts as a **bistable latch**:\n\n1. **State 1 ($M_1$ OFF, $M_2$ in Triode):**\n   * If $V_X$ drops below $V_{TH1}$, $M_1$ turns **OFF** ($I_{D1} = 0$).\n   * Node $V_{\\text{out}}$ pulls up to $V_{DD}$ through $R_{\\text{D1}}$.\n   * With $V_{\\text{out}} = V_{DD}$, $M_2$ turns strongly **ON** into the triode region.\n   * $M_2$ sinks the entire input current $I_{\\text{in}}$, yielding $V_X = I_{\\text{in}} R_{\\text{on2}}$.\n   * As long as $I_{\\text{in}} R_{\\text{on2}} < V_{TH1}$, $M_1$ remains OFF. The loop gain drops to zero ($g_{m1} = 0$), making this a **stable state**.\n\n2. **State 2 ($M_1$ ON, $M_2$ OFF):**\n   * If $V_X$ rises, $M_1$ conducts heavily, pulling $V_{\\text{out}}$ down towards ground ($V_{\\text{out}} < V_{TH2}$).\n   * $M_2$ turns **OFF**.\n   * With $M_2$ off, $I_{\\text{in}}$ charges node $X$ until it reaches the compliance voltage limit of the input current source.\n\n---\n\n### Summary Table\n\n| Parameter / Metric | Expression / Value | Note |\n| :--- | :--- | :--- |\n| **Feedback Type** | Positive (Regenerative) | Loop formed by two inverting CS stages |\n| **Loop Gain ($T$)** | $+g_{m1} g_{m2} (R_{\\text{D1}} \\parallel r_{O1}) r_{O2}$ | Positive return ratio; typically $T \\gg 1$ |\n| **Small-Signal Gain ($Z_T$)** | $\\approx +\\frac{1}{g_{m2}}$ | Evaluated at the (unstable) bias point |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\frac{r_{O2}}{1 - T} < 0$ | Exhibits negative input resistance |\n| **Stability** | **Unstable** (RHP pole exists) | Functions as a latch / regenerative comparator |",
        "format": "markdown",
        "sha256": "dcb0a18ded592fbd2e57d861a01398e2820e5e270c170cccf630b9311b27258d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2 as controlled by Vout rather than diode-connected, traces the positive-feedback loop, and gives the resulting negative input resistance and instability/latching behavior.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 17439,
        "total_tokens": 18558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 17439,
        "total_tokens": 18558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **1. Circuit Overview and Architecture**\n\nThe given circuit is a **two-stage transimpedance amplifier (TIA)** employing **shunt-shunt (voltage-current) negative feedback**. It converts an input current $I_{\\text{in}}$ into an output voltage $V_{\\text{out}}$.\n\n#### **Stage-by-Stage Breakdown:**\n1. **First Stage ($M_1, R_{\\text{D1}}$): Common-Gate (CG) Amplifier**\n   - **Input:** Source of $M_1$\n   - **Gate:** Fixed bias voltage $V_b$ (AC ground)\n   - **Output:** Node $X$ (drain of $M_1$)\n   - **Function:** Provides non-inverting voltage gain from source to drain with low input impedance.\n2. **Second Stage ($M_2, R_{\\text{D2}}$): Common-Source (CS) Amplifier**\n   - **Input:** Node $X$ (gate of $M_2$)\n   - **Source:** Ground\n   - **Output:** $V_{\\text{out}}$ (drain of $M_2$)\n   - **Function:** Provides inverting voltage gain.\n3. **Feedback Network ($R_F$):**\n   - Connected between the output node $V_{\\text{out}}$ and the input node (source of $M_1$).\n   - Samples the output **voltage** (shunt connection at output) and returns a feedback **current** $i_{RF}$ to the input node (shunt connection at input).\n\n---\n\n### **2. Qualitative Operation & Feedback Polarity**\n\nTo confirm that the feedback is **negative**:\n1. Suppose the input current $I_{\\text{in}}$ increases (injecting more current into the source of $M_1$).\n2. The voltage at the source node $V_S$ tends to rise.\n3. Because the gate voltage $V_b$ is fixed, $V_{GS1} = V_b - V_S$ decreases, causing the drain current $I_{D1}$ to decrease.\n4. As $I_{D1}$ drops, the voltage drop across $R_{\\text{D1}}$ decreases, pulling the voltage at node $X$ **up** ($V_X \\uparrow$).\n5. A rising $V_X$ increases $V_{GS2}$ of $M_2$, causing $M_2$ to draw more current through $R_{\\text{D2}}$, which pulls the output voltage **down** ($V_{\\text{out}} \\downarrow$).\n6. As $V_{\\text{out}}$ drops, the current through $R_F$ ($i_{RF} = \\frac{V_{\\text{out}} - V_S}{R_F}$) decreases (i.e., current is drawn away from the input node through $R_F$).\n7. This counteracts the initial increase in voltage at the source node.\n\nThus, the feedback is **strictly negative**.\n\n---\n\n### **3. Small-Signal Analysis**\n\nLet:\n- $g_{m1}, g_{m2}$ be the transconductances of $M_1$ and $M_2$.\n- $g_{mb1}$ be the body-effect transconductance of $M_1$ (let $g_{m1}' = g_{m1} + g_{mb1}$).\n- Assume channel-length modulation is negligible ($r_{o1}, r_{o2} \\gg R_{\\text{D1}}, R_{\\text{D2}}$) for clarity, though their loading can simply be absorbed into $R_{\\text{D1}}$ and $R_{\\text{D2}}$.\n\n---\n\n#### **A. Loop Gain ($T$)**\nTo determine the loop gain, we break the loop at the high-impedance gate of $M_2$ (node $X$):\n1. Apply a test voltage $v_t$ at the gate of $M_2$.\n2. The small-signal output voltage is:\n   $$v_{\\text{out}} = -g_{m2} \\left[ R_{\\text{D2}} \\parallel (R_F + 1/g_{m1}') \\right] v_t$$\n3. By voltage division across $R_F$ and the impedance looking into the source of $M_1$ ($1/g_{m1}'$):\n   $$v_s = v_{\\text{out}} \\cdot \\frac{1/g_{m1}'}{R_F + 1/g_{m1}'} = \\frac{v_{\\text{out}}}{1 + g_{m1}' R_F}$$\n4. The signal returns to node $X$ via the CG stage:\n   $$v_{\\text{ret}} = g_{m1}' R_{\\text{D1}} v_s$$\n\nCombining these yields the loop gain $T = -\\frac{v_{\\text{ret}}}{v_t}$:\n$$T = \\frac{g_{m1}' g_{m2} R_{\\text{D1}} R_{\\text{D2}}}{1 + g_{m1}'(R_{\\text{D2}} + R_F)}$$\n\nFor large $g_{m1}'$:\n$$T \\approx \\frac{g_{m2} R_{\\text{D1}} R_{\\text{D2}}}{R_{\\text{D2}} + R_F}$$\n\n---\n\n#### **B. Closed-Loop Transimpedance Gain ($R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)**\n\nWriting KCL at each node:\n\n1. **At Node $X$:**\n   $$v_X = g_{m1}' R_{\\text{D1}} v_s$$\n\n2. **At Node $V_{\\text{out}}$:**\n   $$\\frac{v_{\\text{out}}}{R_{\\text{D2}}} + g_{m2} v_X + \\frac{v_{\\text{out}} - v_s}{R_F} = 0$$\n   Neglecting the feedforward term $v_s / R_F \\ll g_{m2} v_X$:\n   $$v_{\\text{out}} \\approx - g_{m2} (R_{\\text{D2}} \\parallel R_F) v_X = - g_{m1}' g_{m2} R_{\\text{D1}} (R_{\\text{D2}} \\parallel R_F) v_s = -A_v v_s$$\n   where $A_v = g_{m1}' g_{m2} R_{\\text{D1}} (R_{\\text{D2}} \\parallel R_F)$ is the open-loop voltage gain from source to output.\n\n3. **At Input Node ($v_s$):**\n   $$i_{\\text{in}} = g_{m1}' v_s + \\frac{v_s - v_{\\text{out}}}{R_F} = v_s \\left( g_{m1}' + \\frac{1 + A_v}{R_F} \\right)$$\n\nSubstituting $v_s = -\\frac{v_{\\text{out}}}{A_v}$:\n$$R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = - \\frac{A_v R_F}{1 + g_{m1}' R_F + A_v} = - R_F \\left( \\frac{T}{1 + T} \\right)$$\n\n**Ideal Case:** If the loop gain $T \\gg 1$:\n$$R_T \\approx -R_F$$\nThe transimpedance is set accurately by the feedback resistor $R_F$.\n\n---\n\n#### **C. Input Impedance ($R_{\\text{in}}$)**\n\nFrom the input KCL:\n$$R_{\\text{in}} = \\frac{v_s}{i_{\\text{in}}} = \\frac{1}{g_{m1}' + \\frac{1 + A_v}{R_F}} = \\frac{1}{g_{m1}'} \\;\\Big\\Vert\\; \\frac{R_F}{1 + A_v}$$\n\n- Without feedback, the input impedance of a common-gate stage is $\\approx \\frac{1}{g_{m1}'}$.\n- With feedback, the effective resistance of $R_F$ is reduced by the **Miller effect** to $\\frac{R_F}{1 + A_v}$.\n- As a result, $R_{\\text{in}}$ is **extremely low**, which is ideal for a current-input amplifier because it minimizes input voltage swings and maximizes bandwidth.\n\n---\n\n#### **D. Output Impedance ($R_{\\text{out}}$)**\n\nApplying a test voltage $v_t$ at the output with $i_{\\text{in}} = 0$:\n1. $v_s = v_t \\frac{1/g_{m1}'}{R_F + 1/g_{m1}'} = \\frac{v_t}{1 + g_{m1}' R_F}$\n2. $v_X = g_{m1}' R_{\\text{D1}} v_s = \\frac{g_{m1}' R_{\\text{D1}}}{1 + g_{m1}' R_F} v_t$\n3. $i_t = \\frac{v_t}{R_{\\text{D2}}} + g_{m2} v_X + \\frac{v_t - v_s}{R_F}$\n\nSolving for $R_{\\text{out}} = \\frac{v_t}{i_t}$:\n$$R_{\\text{out}} \\approx R_{\\text{D2}} \\;\\Big\\Vert\\; \\left( \\frac{1 + g_{m1}' R_F}{g_{m1}' g_{m2} R_{\\text{D1}}} \\right) \\approx R_{\\text{D2}} \\;\\Big\\Vert\\; \\frac{R_F}{g_{m2} R_{\\text{D1}}}$$\n\nThe shunt feedback significantly lowers the output impedance below $R_{\\text{D2}}$.\n\n---\n\n### **4. Key Features and Design Trade-offs**\n\n| Parameter | Characteristic | Impact / Trade-off |\n| :--- | :--- | :--- |\n| **Transimpedance Gain** | $R_T \\approx -R_F$ | Determined primarily by $R_F$; very linear and stable over process/temperature. |\n| **Input Pole** | $\\omega_{p,\\text{in}} \\approx \\frac{1}{R_{\\text{in}} C_{\\text{in}}}$ | Because $R_{\\text{in}}$ is very small, the input pole is pushed to very high frequencies, making the bandwidth relatively insensitive to large photodiode/sensor capacitance. |\n| **Dominant Pole** | At Node $X$ | Node $X$ exhibits significant capacitance due to the **Miller-multiplied** gate-drain capacitance of $M_2$ ($C_{gd2}(1 + g_{m2} R_{\\text{D2}})$), making node $X$ the typical dominant pole determining circuit stability. |\n| **Noise Performance** | Moderate to High | $M_1$ contributes channel thermal noise ($4kT\\gamma g_{m1}$) directly at the input, and $R_F$ contributes $4kT/R_F$. To minimize noise, $R_F$ should be chosen as large as headroom and bandwidth permit. |\n| **Voltage Headroom** | Moderate | Requires bias $V_b$ such that $M_1$ remains in saturation ($V_X - V_S > V_{GS1} - V_{TH1}$) while maintaining sufficient swing for $M_2$. |",
        "format": "markdown",
        "sha256": "ce785ce5cd973202c61a75e8e51a7793bd540058e8ac65e584e746bf8a88bb0e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 13996,
        "total_tokens": 15090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 13996,
        "total_tokens": 15090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **two-stage Transimpedance Amplifier (TIA)** employing **shunt-shunt (voltage-current) negative feedback**. It is widely used in high-speed optical communication receivers to convert a weak current signal (such as that from a photodiode, represented by $I_{\\text{in}}$) into a proportional output voltage $V_{\\text{out}}$.\n\n---\n\n### 1. Circuit Architecture and Component Roles\n\n* **Stage 1 ($M_1$, Common-Gate Stage):**\n  * Transistor $M_1$ has its gate tied to a constant DC bias voltage $V_b$ (AC ground).\n  * The input current signal $I_{\\text{in}}$ is injected into the source terminal of $M_1$.\n  * Resistor $R_{\\text{D1}}$ acts as the drain load.\n  * The CG stage provides a **non-inverting** voltage gain from the source to node $X$ and offers an intrinsically low input resistance.\n\n* **Stage 2 ($M_2$, Common-Source Stage):**\n  * Transistor $M_2$ is configured as a common-source amplifier with source grounded, gate driven by node $X$, and drain loaded by resistor $R_{\\text{D2}}$.\n  * It provides an **inverting** voltage gain from node $X$ to the output node $V_{\\text{out}}$.\n\n* **Feedback Network ($R_F$):**\n  * Resistor $R_F$ is connected between the output node $V_{\\text{out}}$ and the input node (source of $M_1$).\n  * It samples the output voltage $V_{\\text{out}}$ (shunt connection at output) and returns a feedback current $i_{\\text{RF}}$ to the input node (shunt connection at input).\n\n---\n\n### 2. Qualitative Operation and Feedback Polarity\n\nTo confirm that the feedback is negative:\n1. Suppose an input current perturbation increases the source voltage of $M_1$ ($v_S \\uparrow$).\n2. Since the gate is at AC ground, the gate-to-source voltage decreases ($v_{GS1} \\downarrow$), which decreases the drain current of $M_1$.\n3. With less current flowing through $R_{\\text{D1}}$, the voltage at node $X$ rises ($v_X \\uparrow$).\n4. A rising $v_X$ increases the gate-to-source voltage of $M_2$ ($v_{GS2} \\uparrow$), pulling more current through $R_{\\text{D2}}$ and causing the output voltage to fall ($v_{\\text{out}} \\downarrow$).\n5. As $v_{\\text{out}}$ drops, it pulls current through $R_F$ away from the input node, opposing the initial voltage increase at the source.\n\nBecause a positive change at the input results in a corrective opposing change via the feedback loop, the circuit operates with **negative feedback**.\n\n---\n\n### 3. Small-Signal Analysis\n\nAssuming transistors operate in saturation and neglecting channel-length modulation ($\\lambda = 0$, $r_o \\to \\infty$) and body effect for clarity:\n\n#### A. Node Equations\n1. **At the source of $M_1$ (Input node, $v_{\\text{in}}$):**\n   $$I_{\\text{in}} + i_{\\text{RF}} = g_{m1} v_{\\text{in}}$$\n   $$I_{\\text{in}} + \\frac{V_{\\text{out}} - v_{\\text{in}}}{R_F} = g_{m1} v_{\\text{in}} \\implies I_{\\text{in}} + \\frac{V_{\\text{out}}}{R_F} = v_{\\text{in}} \\left(g_{m1} + \\frac{1}{R_F}\\right)$$\n\n2. **At node $X$ (Drain of $M_1$):**\n   $$v_X = g_{m1} R_{\\text{D1}} v_{\\text{in}}$$\n\n3. **At the output node ($V_{\\text{out}}$):**\n   $$\\frac{V_{\\text{out}}}{R_{\\text{D2}}} + \\frac{V_{\\text{out}} - v_{\\text{in}}}{R_F} + g_{m2} v_X = 0$$\n   Substituting $v_X = g_{m1} R_{\\text{D1}} v_{\\text{in}}$:\n   $$V_{\\text{out}} \\left(\\frac{1}{R_{\\text{D2}}} + \\frac{1}{R_F}\\right) = v_{\\text{in}} \\left(\\frac{1}{R_F} - g_{m1} g_{m2} R_{\\text{D1}}\\right)$$\n\n#### B. Loop Gain ($T$)\nBreaking the loop at the high-impedance gate of $M_2$:\n* A test voltage $v_t$ at the gate of $M_2$ produces $v_{\\text{out}} = -g_{m2} \\left[ R_{\\text{D2}} \\parallel \\left(R_F + \\frac{1}{g_{m1}}\\right) \\right] v_t$.\n* Voltage division through $R_F$ down to the source gives $v_S = v_{\\text{out}} \\frac{1/g_{m1}}{R_F + 1/g_{m1}}$.\n* Amplification through $M_1$ back to node $X$ gives $v_r = g_{m1} R_{\\text{D1}} v_S$.\n\nThe loop gain $T = -\\frac{v_r}{v_t}$ evaluates to:\n$$T = \\frac{g_{m2} R_{\\text{D1}} R_{\\text{D2}}}{R_F + R_{\\text{D2}} + \\frac{1}{g_{m1}}}$$\n\n#### C. Closed-Loop Transimpedance Gain ($Z_T$)\nSolving the nodal equations yields:\n$$Z_T = \\frac{V_{\\text{out}}}{I_{\\text{in}}} = - \\frac{T}{1 + T} R_F + \\frac{1}{1 + T}\\frac{R_{\\text{D2}}}{1 + g_{m1}(R_F + R_{\\text{D2}})}$$\n\nFor a sufficiently large loop gain ($T \\gg 1$):\n$$Z_T \\approx -R_F$$\n\nThe closed-loop transimpedance gain is primarily set by the feedback resistor $R_F$, making it linear, predictable, and relatively independent of transistor parameters.\n\n---\n\n### 4. Input and Output Impedance\n\n* **Input Impedance ($R_{\\text{in}}$):**\n  Due to the shunt feedback at the input node, the input resistance is significantly reduced below the standard common-gate resistance ($1/g_{m1}$):\n  $$R_{\\text{in}} = \\frac{1}{g_{m1} + \\frac{1 + A_v}{R_F}} \\approx \\frac{1}{g_{m1}(1 + T)}$$\n  where $A_v$ is the open-loop voltage gain from the source of $M_1$ to $V_{\\text{out}}$. \n  * **Significance:** In optical receivers, photodiode parasitic capacitance ($C_{\\text{PD}}$) is often large. An exceptionally low $R_{\\text{in}}$ pushes the input pole ($\\omega_{p,\\text{in}} \\approx \\frac{1}{R_{\\text{in}} C_{\\text{PD}}}$) to very high frequencies, vastly enhancing bandwidth.\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  Due to the shunt sampling at the output:\n  $$R_{\\text{out}} \\approx \\frac{R_{\\text{D2}} \\parallel \\left(R_F + \\frac{1}{g_{m1}}\\right)}{1 + T}$$\n  This ensures a low output impedance, enabling the circuit to drive subsequent filter or buffer stages without severe gain reduction.\n\n---\n\n### 5. Summary of Key Strengths and Trade-offs\n\n| Feature | Advantage | Trade-off / Challenge |\n| :--- | :--- | :--- |\n| **Common-Gate Input Stage** | Isolates the large photodiode capacitance from node $X$; eliminates Miller multiplication of $C_{gd2}$ at the input. | Introduces voltage headroom constraints due to the stacking of $M_1$ and $R_{\\text{D1}}$. |\n| **Shunt-Shunt Feedback** | Drastically reduces $R_{\\text{in}}$ (extending bandwidth) and $R_{\\text{out}}$; stabilizes gain to $Z_T \\approx -R_F$. | Two high-impedance internal nodes (node $X$ and $V_{\\text{out}}$) introduce two poles that require careful frequency compensation to ensure stability. |\n| **Noise Performance** | Transistor $M_1$ acts as a current buffer. | Thermal noise of $R_F$ ($\\overline{i_{n,RF}^2} = \\frac{4kT}{R_F}$) appears directly at the input, creating a fundamental trade-off between bandwidth, gain, and noise. |",
        "format": "markdown",
        "sha256": "4d213092d7617c66e4625785fab612b48ed382498454fe0c894ee3cdf9731b32"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a TIA. It also correctly describes the feedback as negative; the detailed formulas are not required for full credit.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 17782,
        "total_tokens": 18876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 17782,
        "total_tokens": 18876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Identification and Architecture\n\nThe circuit is a **two-stage Transimpedance Amplifier (TIA)** with **shunt-shunt negative feedback**:\n\n1. **Stage 1 (Input Stage): Common-Gate (CG) Amplifier**\n   - Transistor $M_1$ has its gate connected to a fixed bias voltage $V_b$ (AC ground).\n   - The input current $I_{\\text{in}}$ is applied to the source of $M_1$.\n   - Resistor $R_{\\text{D1}}$ serves as the drain load.\n   - Output of Stage 1 is taken at **Node $X$**.\n\n2. **Stage 2: Common-Source (CS) Amplifier**\n   - Transistor $M_2$ has its source grounded and its gate driven by node $X$.\n   - Resistor $R_{\\text{D2}}$ serves as the drain load.\n   - The output voltage $V_{\\text{out}}$ is taken at the drain of $M_2$.\n\n3. **Feedback Network:**\n   - Resistor $R_F$ is connected between the output node $V_{\\text{out}}$ and the input node (source of $M_1$), forming a **shunt-shunt feedback loop**.\n\n---\n\n### 2. Qualitative Operating Principle\n\nTo understand the feedback mechanism, trace a small positive perturbation in the input current $i_{\\text{in}}$:\n\n$$\\Delta i_{\\text{in}} \\uparrow \\;\\implies\\; v_{\\text{in}} \\uparrow \\;\\implies\\; v_{gs1} \\downarrow \\;\\implies\\; i_{d1} \\downarrow \\;\\implies\\; v_X \\uparrow \\;\\implies\\; v_{gs2} \\uparrow \\;\\implies\\; i_{d2} \\uparrow \\;\\implies\\; v_{\\text{out}} \\downarrow$$\n\n- Because $v_{\\text{out}}$ drops as $v_{\\text{in}}$ rises, the voltage difference across $R_F$ ($v_{\\text{out}} - v_{\\text{in}}$) becomes negative.\n- This draws current through $R_F$ away from the input node, opposing the injected current $i_{\\text{in}}$.\n- Consequently, this constitutes **negative feedback**, which regulates the input node to act as a virtual ground and ensures stable transimpedance operation.\n\n---\n\n### 3. DC Biasing and Saturation Conditions\n\nFor linear amplification, both transistors must remain in the **saturation region**:\n\n- **For $M_1$:**\n  $$V_{S1} = V_b - V_{GS1}$$\n  $$V_X = V_{DD} - I_{D1} R_{\\text{D1}}$$\n  To keep $M_1$ in saturation:\n  $$V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_X \\ge V_b - V_{TH1}$$\n\n- **For $M_2$:**\n  $$V_{GS2} = V_X$$\n  $$V_{\\text{out}} \\approx V_{DD} - I_{D2} R_{\\text{D2}}$$\n  To keep $M_2$ in saturation:\n  $$V_{DS2} \\ge V_{GS2} - V_{TH2} \\implies V_{\\text{out}} \\ge V_X - V_{TH2}$$\n\n---\n\n### 4. Small-Signal Analysis\n\nLet:\n- $g_{m1}, g_{m2}$ be the transconductances of $M_1$ and $M_2$.\n- $g_{m1}' = g_{m1} + g_{mb1}$ include the body effect of $M_1$ (since its source is not at AC ground).\n- Channel length modulation ($r_{o1}, r_{o2}$) be neglected initially for clarity ($r_o \\gg R_D$).\n\n#### Step 1: Stage Gains\n1. **Node $X$ Voltage:**\n   The small-signal current into the source of $M_1$ is $g_{m1}' v_{\\text{in}}$. Neglecting $r_{o1}$, the same current flows through $R_{\\text{D1}}$:\n   $$v_X = g_{m1}' R_{\\text{D1}} v_{\\text{in}}$$\n\n2. **Stage 2 Output Voltage:**\n   Stage 2 is a CS amplifier:\n   $$v_{\\text{out}} = -g_{m2} (R_{\\text{D2}} \\parallel R_F) v_X$$\n\n#### Step 2: KCL at Output Node ($V_{\\text{out}}$)\n$$\\frac{v_{\\text{out}}}{R_{\\text{D2}}} + g_{m2} v_X + \\frac{v_{\\text{out}} - v_{\\text{in}}}{R_F} = 0$$\n\nSubstitute $v_X = g_{m1}' R_{\\text{D1}} v_{\\text{in}}$:\n$$v_{\\text{out}} \\left(\\frac{1}{R_{\\text{D2}}} + \\frac{1}{R_F}\\right) = -v_{\\text{in}} \\left(g_{m1}' g_{m2} R_{\\text{D1}} - \\frac{1}{R_F}\\right)$$\n\n$$v_{\\text{in}} = -v_{\\text{out}} \\frac{\\frac{1}{R_{\\text{D2}}} + \\frac{1}{R_F}}{g_{m1}' g_{m2} R_{\\text{D1}} - \\frac{1}{R_F}}$$\n\n#### Step 3: KCL at Input Node ($v_{\\text{in}}$)\n$$i_{\\text{in}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{R_F} = g_{m1}' v_{\\text{in}}$$\n\n$$i_{\\text{in}} = v_{\\text{in}} \\left(g_{m1}' + \\frac{1}{R_F}\\right) - \\frac{v_{\\text{out}}}{R_F}$$\n\n#### Step 4: Closed-Loop Transimpedance Gain ($Z_T$)\nSubstituting $v_{\\text{in}}$ into the input KCL gives the exact closed-loop transimpedance:\n\n$$Z_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = - R_F \\cdot \\frac{g_{m1}' g_{m2} R_{\\text{D1}} R_{\\text{D2}} - \\frac{R_{\\text{D2}}}{R_F}}{g_{m1}' g_{m2} R_{\\text{D1}} R_{\\text{D2}} + g_{m1}' (R_{\\text{D2}} + R_F) + 1}$$\n\nDefining the open-loop voltage gain $A_v = g_{m1}' g_{m2} R_{\\text{D1}} R_{\\text{D2}}$:\n\n$$Z_T \\approx - R_F \\left(\\frac{A_v}{A_v + g_{m1}' (R_{\\text{D2}} + R_F) + 1}\\right)$$\n\nIf the loop gain is sufficiently high ($A_v \\gg g_{m1}' (R_{\\text{D2}} + R_F) + 1$):\n$$\\boxed{Z_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx -R_F}$$\n\n---\n\n### 5. Input and Output Impedance\n\n#### 1. Input Resistance ($R_{\\text{in}}$)\nUsing the input KCL:\n$$i_{\\text{in}} = v_{\\text{in}} \\left[ g_{m1}' + \\frac{1 - A_v^{cl}}{R_F} \\right]$$\nwhere $A_v^{cl} = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx - g_{m1}' g_{m2} R_{\\text{D1}} (R_{\\text{D2}} \\parallel R_F)$.\n\nThus:\n$$\\boxed{R_{\\text{in}} = \\frac{v_{\\text{in}}}{i_{\\text{in}}} = \\frac{1}{g_{m1}' + \\frac{1 + |A_v^{cl}|}{R_F}} = \\frac{1}{g_{m1}'} \\parallel \\frac{R_F}{1 + |A_v^{cl}|}}$$\n\n> **Key Design Insight:** In a conventional CG TIA, $R_{\\text{in}} \\approx 1/g_{m1}'$. Here, the shunt-shunt feedback places an additional low impedance $\\frac{R_F}{1 + |A_v^{cl}|}$ in parallel. This **substantially lowers $R_{\\text{in}}$** without requiring a massive bias current to increase $g_{m1}'$.\n\n#### 2. Output Resistance ($R_{\\text{out}}$)\nApplying a test voltage $v_t$ at $V_{\\text{out}}$ with $i_{\\text{in}} = 0$:\n$$\\boxed{R_{\\text{out}} \\approx R_{\\text{D2}} \\parallel \\left(\\frac{R_F}{g_{m2} R_{\\text{D1}}}\\right)}$$\nDue to negative feedback, the output resistance is significantly lower than $R_{\\text{D2}}$.\n\n---\n\n### 6. Frequency Response and Bandwidth\n\nThe circuit has three principal poles:\n\n1. **Input Pole ($\\omega_{p,\\text{in}}$):**\n   $$\\omega_{p,\\text{in}} = \\frac{1}{R_{\\text{in}} C_{\\text{in}}}$$\n   Where $C_{\\text{in}} = C_{pd} + C_{gs1} + C_{sb1} + C_F$ (where $C_{pd}$ is the photodiode capacitance).\n   - Because $R_{\\text{in}}$ is reduced by feedback, the large capacitance $C_{pd}$ is effectively isolated, pushing $\\omega_{p,\\text{in}}$ to very high frequencies.\n\n2. **Node $X$ Pole ($\\omega_{p,X}$):**\n   $$\\omega_{p,X} \\approx \\frac{1}{R_{\\text{D1}} \\left[ C_{db1} + C_{gd1} + C_{gs2} + (1 + g_{m2} R_{\\text{out2}}) C_{gd2} \\right]}$$\n   - Due to the Miller effect on $C_{gd2}$, Node $X$ often forms the **dominant pole** of the amplifier.\n\n3. **Output Pole ($\\omega_{p,\\text{out}}$):**\n   $$\\omega_{p,\\text{out}} \\approx \\frac{1}{R_{\\text{out}} C_{\\text{out}}}$$\n\n---\n\n### 7. Noise Performance\n\nThe main noise sources are:\n1. **Feedback Resistor $R_F$:** Thermal noise current spectral density:\n   $$\\overline{i_{n,RF}^2} = \\frac{4kT}{R_F}$$\n   This noise is directly injected at the input.\n2. **Input Transistor $M_1$:** Channel thermal noise $\\overline{i_{n,M1}^2} = 4kT \\gamma g_{m1}$.\n3. **Load Resistor $R_{\\text{D1}}$:** Thermal noise $\\overline{i_{n,RD1}^2} = \\frac{4kT}{R_{\\text{D1}}}$, with input-referred noise:\n   $$\\overline{i_{n,\\text{in},RD1}^2} \\approx \\frac{4kT}{g_{m1}^2 R_{\\text{D1}}}$$\n\n**Total Input-Referred Noise Current:**\n$$\\overline{i_{n,\\text{in,tot}}^2} \\approx \\frac{4kT}{R_F} + \\frac{4kT \\gamma}{g_{m1}} \\left(\\frac{1}{R_F}\\right)^2 + \\frac{4kT}{g_{m1}^2 R_{\\text{D1}}}$$\n\nIncreasing $R_F$ simultaneously increases the transimpedance gain and lowers the input-referred thermal noise current.\n\n---\n\n### 8. Summary of Advantages\n\n| Feature | Advantage |\n| :--- | :--- |\n| **Low Input Impedance** | Feedback reduces $R_{\\text{in}}$ well below $1/g_{m1}$, isolating large sensor/photodiode capacitance and dramatically enhancing bandwidth. |\n| **Power Efficiency** | Low $R_{\\text{in}}$ is achieved via loop gain rather than brute-force increase of $g_{m1}$, saving DC power. |\n| **Well-Defined Gain** | The closed-loop transimpedance is set primarily by $R_F$ ($Z_T \\approx -R_F$), providing good linearity and gain accuracy. |",
        "format": "markdown",
        "sha256": "e8f4c384c085ae92b16eb3729e27072f947f773a4c33d999865c7901511ad44c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a negative-feedback TIA. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 18750,
        "total_tokens": 19844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15889,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1094,
        "output_tokens": 18750,
        "total_tokens": 19844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15889,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Overview and Identification\n\nThe circuit is a **closed-loop Transimpedance Amplifier (TIA)** employing **shunt-shunt negative feedback**:\n\n* **Transistor Types:**\n  * **$M_1$ (NMOS):** Configured as a **Common-Gate (CG)** amplifier stage with its gate biased at a constant DC potential $V_b$. Its drain is tied to the output node ($V_{\\text{out}}$) and its source is connected to the input node ($X$).\n  * **$M_2$ (PMOS):** Acts as the **feedback transistor**. Its source is connected to $V_{DD}$, its gate senses the output voltage $V_{\\text{out}}$, and its drain feeds current back to the input node $X$.\n* **Current Sources:**\n  * **$I_1$:** Active load current source for the common-gate stage $M_1$.\n  * **Bottom Current Sink ($I_{\\text{bias}}$):** Sets the DC bias current of the input node.\n* **Input and Output:**\n  * **Input:** Current signal $I_{\\text{in}}$ injected into node $X$.\n  * **Output:** Voltage signal $V_{\\text{out}}$ taken from the drain of $M_1$.\n\n---\n\n### 2. DC Operating Point and Bias Analysis\n\nLet $I_{\\text{bias}}$ denote the unlabelled DC current sink connected between node $X$ and ground.\n\n1. **DC Currents:**\n   * Assuming no DC current is drawn by the output load or the gate of $M_2$, the DC drain current of $M_1$ is strictly set by the upper current source:\n     $$I_{D1} = I_1$$\n   * Applying Kirchhoff's Current Law (KCL) at the input node $X$ in the quiescent state ($I_{\\text{in}} = 0$):\n     $$I_{D2} + I_{D1} = I_{\\text{bias}} \\implies I_{D2} = I_{\\text{bias}} - I_1$$\n     *For $M_2$ to remain on and properly biased, we require:*\n     $$I_{\\text{bias}} > I_1$$\n\n2. **DC Node Voltages:**\n   * At the input node $X$:\n     $$V_X = V_b - V_{GS1} = V_b - V_{TH1} - \\sqrt{\\frac{2I_1}{\\mu_n C_{ox} (W/L)_1}}$$\n   * At the output node $V_{\\text{out}}$:\n     $$V_{\\text{out}} = V_{DD} - |V_{GS2}| = V_{DD} - |V_{TH2}| - \\sqrt{\\frac{2(I_{\\text{bias}} - I_1)}{\\mu_p C_{ox} (W/L)_2}}$$\n\n3. **Saturation Conditions:**\n   * For $M_1$ (NMOS) to stay in saturation:\n     $$V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_{\\text{out}} \\ge V_b - V_{TH1}$$\n   * For $M_2$ (PMOS) to stay in saturation:\n     $$V_{SD2} \\ge V_{SG2} - |V_{TH2}| \\implies V_{\\text{out}} \\ge V_X - |V_{TH2}|$$\n\n---\n\n### 3. Small-Signal Analysis\n\nLet:\n* $g_{m1}, g_{m2}$ be the transconductances of $M_1$ and $M_2$ (including body effect for $M_1$: $g_{m1}' = g_{m1} + g_{mb1}$).\n* $r_{o1}, r_{o2}$ be the channel-length modulation resistances of $M_1$ and $M_2$.\n* $r_{I1}, r_{I0}$ be the finite output impedances of the current sources $I_1$ and $I_{\\text{bias}}$.\n* $G_X = \\frac{1}{r_{o2} \\parallel r_{I0}} = g_{ds2} + g_{ds,I0}$.\n\n```\n                 VDD\n                  |\n             +----+----+\n             |         |\n           |/ S        |\n      +---| M2        ( ) I1 (ro,I1)\n      |    |\\ D        |\n      |       |        +-------o Vout\n      |       +---+----+\n      |       |   |    |\n      |       |   |  |/ D\n      +-------|---|--| M1 (Gate at Vb = AC ground)\n              |   |  |\\ S\n    Iin (^)   |   |    |\n         |    |   +----+\n         +----+----+ (Node X)\n              |\n             ( ) Ibias (ro,I0)\n              |\n             GND\n```\n\n#### A. Transimpedance Gain ($R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)\n\n1. **KCL at Node $V_{\\text{out}}$:**\n   The small-signal current flowing from node $V_{\\text{out}}$ through $M_1$ into node $X$ is:\n   $$i_{d1} = -g_{m1} v_x + \\frac{v_{\\text{out}} - v_x}{r_{o1}}$$\n   KCL at $V_{\\text{out}}$ requires:\n   $$\\frac{v_{\\text{out}}}{r_{I1}} + i_{d1} = 0 \\implies i_{d1} = -\\frac{v_{\\text{out}}}{r_{I1}}$$\n   Equating the two:\n   $$v_{\\text{out}} \\left(\\frac{1}{r_{I1}} + \\frac{1}{r_{o1}}\\right) = v_x \\left(g_{m1} + \\frac{1}{r_{o1}}\\right)$$\n   This gives the forward voltage gain of the common-gate stage:\n   $$A_v = \\frac{v_{\\text{out}}}{v_x} = \\frac{g_{m1} + g_{ds1}}{g_{ds,I1} + g_{ds1}} \\approx g_{m1}(r_{o1} \\parallel r_{I1})$$\n\n2. **KCL at Node $X$:**\n   The current injected by $M_2$ into node $X$ is:\n   $$i_{d2} = g_{m2} v_{sg2} - \\frac{v_x}{r_{o2}} = -g_{m2} v_{\\text{out}} - g_{ds2} v_x$$\n   Summing currents at node $X$:\n   $$i_{\\text{in}} + i_{d1} + i_{d2} = \\frac{v_x}{r_{I0}}$$\n   Substitute $i_{d1} = -\\frac{v_{\\text{out}}}{r_{I1}}$:\n   $$i_{\\text{in}} - \\left(g_{m2} + \\frac{1}{r_{I1}}\\right) v_{\\text{out}} = \\left(g_{ds2} + g_{ds,I0}\\right) v_x = G_X v_x$$\n   Using $v_x = \\frac{v_{\\text{out}}}{A_v}$:\n   $$i_{\\text{in}} = \\left[ g_{m2} + g_{ds,I1} + \\frac{G_X}{A_v} \\right] v_{\\text{out}}$$\n\n3. **Closed-Loop Transimpedance:**\n   $$R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2} + \\frac{1}{r_{I1}} + \\frac{G_X}{A_v}}$$\n   For large forward loop gain ($A_v \\gg 1$) and high-impedance current sources ($r_{I1} \\gg 1/g_{m2}$):\n   $$\\mathbf{R_m \\approx \\frac{1}{g_{m2}}}$$\n\n---\n\n#### B. Input Resistance ($R_{\\text{in}}$)\n\nThe input impedance is evaluated at node $X$:\n$$R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = \\frac{v_{\\text{out}} / A_v}{i_{\\text{in}}} = \\frac{R_m}{A_v}$$\nSubstituting $R_m \\approx \\frac{1}{g_{m2}}$:\n$$\\mathbf{R_{\\text{in}} \\approx \\frac{1}{g_{m2} A_v} \\approx \\frac{1}{g_{m1} g_{m2} (r_{o1} \\parallel r_{I1})}}$$\n\n> **Key Insight:** In a conventional common-gate stage, the input impedance is $R_{\\text{in}} \\approx \\frac{1}{g_{m1}}$. The negative feedback via $M_2$ reduces the input impedance by an additional factor of $g_{m2}(r_{o1} \\parallel r_{I1})$, creating a near-ideal **virtual ground** at the current-input terminal.\n\n---\n\n#### C. Output Resistance ($R_{\\text{out}}$)\n\nTo calculate $R_{\\text{out}}$, deactivate $i_{\\text{in}} = 0$ and apply a test voltage $v_t$ at $V_{\\text{out}}$:\n1. The test voltage modulates the gate of $M_2$, decreasing its injection current into node $X$:\n   $$\\Delta i_{d2} = -g_{m2} v_t$$\n2. This pulls down node $X$, increasing the $V_{GS}$ of $M_1$:\n   $$v_x \\approx -\\frac{g_{m2}}{g_{m1}} v_t$$\n3. As a result, $M_1$ conducts additional current from the test source:\n   $$i_{d1} \\approx g_{m1}(-v_x) \\approx g_{m2} v_t$$\n4. The total current drawn from $v_t$ is:\n   $$i_t = \\frac{v_t}{r_{I1}} + i_{d1} \\approx \\left(\\frac{1}{r_{I1}} + g_{m2}\\right) v_t \\approx g_{m2} v_t$$\n5. Thus:\n   $$\\mathbf{R_{\\text{out}} \\approx \\frac{1}{g_{m2}}}$$\n\n---\n\n### 4. Feedback System Interpretation (Two-Port Analysis)\n\nThis circuit maps directly to a **Shunt-Shunt Feedback** architecture:\n\n| Parameter | Formula / Value |\n| :--- | :--- |\n| **Forward Amplifier ($A$)** | Common-Gate stage ($M_1$): $A_v \\approx g_{m1}(r_{o1} \\parallel r_{I1})$ |\n| **Feedback Network ($\\beta$)** | Transconductance of $M_2$: $\\beta = \\frac{i_{fb}}{v_{\\text{out}}} = g_{m2}$ |\n| **Loop Gain ($T$)** | $T \\approx g_{m1} g_{m2} r_{o1} (r_{o2} \\parallel r_{I0})$ |\n| **Closed-Loop Gain ($R_m$)** | $R_m = \\frac{R_{m,\\text{open}}}{1 + T} \\approx \\frac{1}{\\beta} = \\mathbf{\\frac{1}{g_{m2}}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $R_{\\text{in}} = \\frac{R_{\\text{in,open}}}{1 + T} \\approx \\frac{1/g_{m1}}{T} \\approx \\mathbf{\\frac{1}{g_{m1} g_{m2} R_L}}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $R_{\\text{out}} = \\frac{R_{\\text{out,open}}}{1 + T} \\approx \\mathbf{\\frac{1}{g_{m2}}}$ |\n\n---\n\n### 5. Summary and Practical Application\n\n* **Application:** Commonly utilized in **optical communication front-ends (photodiode receivers)**.\n* **Main Advantage:** Large photodiode parasitic capacitances ($C_{PD}$) typically create a dominant low-frequency pole at the input. By suppressing the input resistance to $R_{\\text{in}} \\approx \\frac{1}{g_{m1} g_{m2} R_L}$, this topology pushes the input pole $\\omega_{p,\\text{in}} = \\frac{1}{R_{\\text{in}} C_{PD}}$ to substantially higher frequencies, dramatically extending the **bandwidth** without degrading the transimpedance gain.",
        "format": "markdown",
        "sha256": "a4d1bb9bb5f5219a3f7dc202bcb0d1f5aa7babb5ad011327ec32994c834a347d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS, M2 as the PMOS feedback device driven by Vout, and the feedback path to the input node. It gives the very low input resistance and the expected transimpedance and output resistance of approximately 1/gm2; this satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 17289,
        "total_tokens": 18378,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14385,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 17289,
        "total_tokens": 18378,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14385,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **regulated common-gate transimpedance amplifier (TIA)** that employs **shunt-shunt negative feedback**. It is widely used in high-speed analog front-ends, such as optical receiver preamplifiers interfacing with photodiodes.\n\n---\n\n### 1. Circuit Identification and Classification\n\n* **Transistor Types:**\n  * **$M_1$ (NMOS):** Operates as a **common-gate (CG)** amplifier stage. Its gate is biased at a fixed DC voltage $V_b$, its source is connected to the input node (Node $X$), and its drain provides the output $V_{\\text{out}}$.\n  * **$M_2$ (PMOS):** Operates as a **feedback element**. Its source is tied to $V_{DD}$, its gate senses the output voltage $V_{\\text{out}}$, and its drain feeds current back into Node $X$.\n* **Current Sources:**\n  * **$I_1$:** Active pull-up load for the common-gate stage $M_1$.\n  * **Bottom Current Source ($I_0$):** Sinks the combined DC bias currents from $M_1$, $M_2$, and the DC component of $I_{\\text{in}}$.\n* **Feedback Topology:**\n  * **Sensing:** Senses output **voltage** at $V_{\\text{out}}$ (connected to the gate of $M_2$) $\\rightarrow$ **Shunt sensing**.\n  * **Return:** Injects feedback **current** into the input node $X$ $\\rightarrow$ **Shunt mixing**.\n  * **Classification:** **Shunt-Shunt (Voltage-Current) Feedback**, which acts as a **Transimpedance Amplifier** ($I_{\\text{in}} \\to V_{\\text{out}}$).\n\n---\n\n### 2. Qualitative / Feedback Operation\n\n1. Suppose the input current $I_{\\text{in}}$ increases into Node $X$.\n2. The voltage at Node $X$ ($V_X$) tends to rise.\n3. Since $V_b$ is fixed, the gate-to-source voltage of $M_1$ ($V_{GS1} = V_b - V_X$) **decreases**.\n4. The decrease in $V_{GS1}$ reduces the current drawn by $M_1$ from node $V_{\\text{out}}$.\n5. Because load current source $I_1$ supplies a constant current, the surplus current charges the output node capacitance, causing **$V_{\\text{out}}$ to rise**.\n6. As $V_{\\text{out}}$ rises, the source-to-gate voltage of the PMOS transistor $M_2$ ($V_{SG2} = V_{DD} - V_{\\text{out}}$) **decreases**.\n7. Consequently, the drain current supplied by $M_2$ into Node $X$ **decreases**, counteracting the initial rise in $I_{\\text{in}}$ and pulling $V_X$ back down.\n\nThis confirms that the loop provides **negative feedback**.\n\n---\n\n### 3. DC Biasing and Headroom\n\n#### DC Current Relationships:\n* In DC, the gate of $M_2$ draws zero current, so all current from $I_1$ flows through $M_1$:\n  $$I_{D1} = I_1$$\n* Applying KCL at Node $X$:\n  $$I_0 = I_{D1} + I_{D2} + I_{\\text{in,DC}} = I_1 + I_{D2} + I_{\\text{in,DC}}$$\n* For $M_2$ to remain active ($I_{D2} > 0$):\n  $$I_0 > I_1 + I_{\\text{in,DC}}$$\n\n#### Saturation Conditions:\n* **For $M_1$ (NMOS):**\n  $$V_{GS1} > V_{TH1} \\implies V_X < V_b - V_{TH1}$$\n  $$V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_{\\text{out}} \\ge V_b - V_{TH1}$$\n* **For $M_2$ (PMOS):**\n  $$V_{SG2} > |V_{TH2}| \\implies V_{\\text{out}} < V_{DD} - |V_{TH2}|$$\n  $$V_{SD2} \\ge V_{SG2} - |V_{TH2}| \\implies V_X \\le V_{\\text{out}} + |V_{TH2}|$$\n* **Allowable Output Voltage Swing:**\n  $$V_b - V_{TH1} \\le V_{\\text{out}} \\le V_{DD} - |V_{TH2}|$$\n\n---\n\n### 4. Small-Signal Analysis\n\nLet:\n* $g_{m1}, r_{O1}$ and $g_{m2}, r_{O2}$ be the transconductances and output resistances of $M_1$ and $M_2$.\n* $g_{m1}' = g_{m1} + g_{mb1}$ (accounting for body effect in $M_1$, as its source is not at AC ground).\n* $r_{O,I1}$ and $r_{O0}$ be the finite output resistances of current source $I_1$ and the bottom current source.\n\n#### A. Closed-Loop Transimpedance Gain ($R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)\n\nWriting KCL at Node $V_{\\text{out}}$:\n$$-\\frac{v_{\\text{out}}}{r_{O,I1}} = i_{ds1}$$\nwhere $i_{ds1} \\approx -g_{m1}' v_x + \\frac{v_{\\text{out}} - v_x}{r_{O1}}$. \n\nRelating $v_{\\text{out}}$ to $v_x$:\n$$v_{\\text{out}} \\approx g_{m1}' (r_{O1} \\parallel r_{O,I1}) v_x = A_{v1} v_x$$\nwhere $A_{v1}$ is the large forward voltage gain of the common-gate stage.\n\nWriting KCL at Node $X$:\n$$i_{\\text{in}} + i_{d2} + i_{ds1} = \\frac{v_x}{r_{O0}}$$\nSubstituting $i_{d2} = -g_{m2} v_{\\text{out}} - \\frac{v_x}{r_{O2}}$ and $i_{ds1} = -\\frac{v_{\\text{out}}}{r_{O,I1}}$:\n$$i_{\\text{in}} = v_{\\text{out}} \\left( g_{m2} + \\frac{1}{r_{O,I1}} \\right) + v_x \\left( \\frac{1}{r_{O2}} + \\frac{1}{r_{O0}} \\right)$$\n\nSubstituting $v_x = \\frac{v_{\\text{out}}}{A_{v1}}$:\n$$R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2} + \\frac{1}{r_{O,I1}} + \\frac{1}{A_{v1}(r_{O2} \\parallel r_{O0})}}$$\n\nSince $A_{v1} \\gg 1$ and $g_{m2} \\gg \\frac{1}{r_O}$:\n$$\\boxed{\\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx \\frac{1}{g_{m2}}}$$\n\n> **Key Insight:** In ideal shunt-shunt feedback, the closed-loop gain is $1/\\beta$. Here, the feedback transistor $M_2$ converts $v_{\\text{out}}$ to a feedback current $i_{\\text{fb}} = g_{m2} v_{\\text{out}}$ (so $\\beta = g_{m2}$). Therefore, the closed-loop transimpedance gain is set purely by $\\frac{1}{g_{m2}}$.\n\n---\n\n#### B. Loop Gain ($T$)\n\nBreaking the loop at the high-impedance gate of $M_2$:\n1. Apply a test voltage $v_t$ at the gate of $M_2$.\n2. The current injected into Node $X$ is $-g_{m2} v_t$.\n3. This current produces a voltage $v_x \\approx \\frac{-g_{m2} v_t}{g_{m1}'}$.\n4. The common-gate stage amplifies $v_x$ to return $v_r = A_{v1} v_x \\approx -g_{m2} (r_{O1} \\parallel r_{O,I1}) v_t$.\n\nThe loop gain is:\n$$\\boxed{T = -\\frac{v_r}{v_t} \\approx g_{m2} (r_{O1} \\parallel r_{O,I1})}$$\n*(If $r_{O,I1} \\to \\infty$, $T$ is boosted to $\\approx g_{m1}' g_{m2} r_{O1} (r_{O2} \\parallel r_{O0})$).*\n\n---\n\n#### C. Input Impedance ($R_{\\text{in}}$)\n\nWithout feedback, the input resistance looking into the source of $M_1$ is $R_{\\text{in,open}} \\approx \\frac{1}{g_{m1}'}$.\nBecause shunt feedback lowers the input resistance by a factor of $(1 + T)$:\n$$R_{\\text{in}} = \\frac{R_{\\text{in,open}}}{1 + T} \\approx \\frac{\\frac{1}{g_{m1}'}}{g_{m2} (r_{O1} \\parallel r_{O,I1})}$$\n$$\\boxed{R_{\\text{in}} \\approx \\frac{1}{g_{m1}' g_{m2} (r_{O1} \\parallel r_{O,I1})}}$$\n\n> **Why this matters:** $R_{\\text{in}}$ is reduced by an order of magnitude compared to a conventional common-gate stage ($\\frac{1}{g_{m1}}$). This pushes the input pole $\\omega_{\\text{in}} = \\frac{1}{R_{\\text{in}} C_{\\text{in}}}$ to very high frequencies, preventing a large input capacitance (e.g., from a photodiode) from limiting the circuit bandwidth.\n\n---\n\n#### D. Output Impedance ($R_{\\text{out}}$)\n\nApplying a test voltage $v_t$ at $V_{\\text{out}}$:\n1. $v_t$ increases $V_{G2}$, reducing $M_2$'s drain current by $g_{m2} v_t$.\n2. This pulls Node $X$ lower: $v_x \\approx -\\frac{g_{m2}}{g_{m1}'} v_t$.\n3. The drop in $v_x$ increases $V_{GS1}$, forcing $M_1$ to sink an additional current of $g_{m1}' (-v_x) \\approx g_{m2} v_t$.\n4. The test source supplies this extra current:\n$$i_t \\approx g_{m2} v_t + \\frac{v_t}{r_{O,I1}} \\approx g_{m2} v_t$$\n$$\\boxed{R_{\\text{out}} \\approx \\frac{1}{g_{m2}}}$$\n\n---\n\n### 5. Summary Table\n\n| Parameter | Exact Expression (Approximated) | Ideal / First-Order Value |\n| :--- | :--- | :--- |\n| **Circuit Function** | Regulated CG Transimpedance Amplifier | Transimpedance Amplifier |\n| **Feedback Type** | Shunt-Shunt (Voltage-Current) | Negative Feedback |\n| **Gain ($V_{\\text{out}} / I_{\\text{in}}$)** | $\\left[ g_{m2} + \\frac{1}{r_{O,I1}} + \\frac{1}{A_{v1}(r_{O2} \\parallel r_{O0})} \\right]^{-1}$ | **$\\frac{1}{g_{m2}}$** |\n| **Loop Gain ($T$)** | $g_{m2} (r_{O1} \\parallel r_{O,I1})$ | $\\gg 1$ |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\frac{1}{g_{m1}' g_{m2} (r_{O1} \\parallel r_{O,I1})}$ | $\\approx 0$ (Virtual Ground) |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\frac{1}{g_{m2} + 1/r_{O,I1}}$ | **$\\frac{1}{g_{m2}}$** |",
        "format": "markdown",
        "sha256": "04b90796ae2e4bd0e3e53e6829d2bb8655aede62c2b288700a97efbbde9d6b7e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device, describes the loop back to the input node, and gives the expected very low input resistance and transimpedance near 1/gm2. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 19829,
        "total_tokens": 20918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16960,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 19829,
        "total_tokens": 20918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16960,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Overview and Identification\n\nThe circuit is a **closed-loop Transimpedance Amplifier (TIA)** configured with **shunt-shunt (voltage-current) negative feedback**. It converts an input current signal $I_{\\text{in}}$ into an output voltage signal $V_{\\text{out}}$.\n\n* **$M_1$ (NMOS):** Operates as a **common-gate (CG)** stage. Its gate is held at a fixed DC bias voltage $V_b$, its source is connected to the input node (Node $X$), and its drain provides the output $V_{\\text{out}}$.\n* **$M_2$ (PMOS):** Acts as the **feedback transistor** in a **common-source (CS)** configuration. Its source is connected to $V_{DD}$, its gate senses the output voltage $V_{\\text{out}}$, and its drain feeds current back into the input node (Node $X$).\n* **$I_1$:** A DC current source that provides the bias current for $M_1$ and serves as the high-impedance active load at $V_{\\text{out}}$.\n* **Current Sink (unlabeled at the bottom):** Sets the DC operating point by sinking current from the input node to ground. Let this current be denoted as $I_B$.\n* **$I_{\\text{in}}$:** The input signal current entering Node $X$.\n\n---\n\n### 2. Qualitative Feedback Mechanism\n\nTo determine the nature and polarity of the feedback:\n\n1. Assume the input current $I_{\\text{in}}$ increases, tending to pull the voltage at the input node ($V_X$) **up**.\n2. As $V_X$ increases, the gate-to-source voltage of $M_1$ ($V_{GS1} = V_b - V_X$) **decreases**, reducing the drain current of $M_1$.\n3. Since current source $I_1$ supplies a fixed current, the reduction in $I_{D1}$ causes the output voltage $V_{\\text{out}}$ to **rise** (positive gain from source to drain of CG stage $M_1$).\n4. As $V_{\\text{out}}$ rises, the source-to-gate voltage of PMOS $M_2$ ($V_{SG2} = V_{DD} - V_{\\text{out}}$) **decreases**, which causes the drain current $I_{D2}$ to **decrease**.\n5. A lower $I_{D2}$ injects less current into Node $X$, counteracting the initial rise in $V_X$ and pulling Node $X$ back down.\n\nBecause an initial disturbance is opposed, the circuit employs **negative feedback**. Since voltage is sensed at the output (parallel connection) and current is summed at the input (parallel connection), the topology is **shunt-shunt feedback**.\n\n---\n\n### 3. DC Bias Analysis\n\nLet Node $X$ be the node connecting the source of $M_1$, the drain of $M_2$, $I_{\\text{in}}$, and the tail sink $I_B$.\n\n#### A. Node Voltages and Currents\n1. **Current through $M_1$:**\n   Since gate current is zero and $I_1$ is in series with $M_1$:\n   $$I_{D1} = I_1$$\n\n2. **Input Node Voltage ($V_X$):**\n   With $M_1$ in saturation:\n   $$I_{D1} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_b - V_X - V_{TH1})^2 = I_1$$\n   $$V_X = V_b - V_{TH1} - \\sqrt{\\frac{2I_1}{\\mu_n C_{ox}(W/L)_1}}$$\n\n3. **Current through $M_2$:**\n   Applying KCL at Node $X$ (assuming a quiescent input current $I_{\\text{in,DC}}$):\n   $$I_{D2} + I_{D1} + I_{\\text{in,DC}} = I_B$$\n   $$I_{D2} = I_B - I_1 - I_{\\text{in,DC}}$$\n   *(Requirement: $I_B > I_1 + I_{\\text{in,DC}}$ for $M_2$ to remain on).*\n\n4. **Output Voltage ($V_{\\text{out}}$):**\n   $M_2$ operates in saturation:\n   $$I_{D2} = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{out}} - |V_{THp}|)^2$$\n   $$V_{\\text{out}} = V_{DD} - |V_{THp}| - \\sqrt{\\frac{2(I_B - I_1 - I_{\\text{in,DC}})}{\\mu_p C_{ox}(W/L)_2}}$$\n\n#### B. Saturation Conditions\n* **For $M_1$ (NMOS):** \n  $$V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_{\\text{out}} \\ge V_b - V_{TH1}$$\n* **For $M_2$ (PMOS):** \n  $$V_{SD2} \\ge V_{SG2} - |V_{THp}| \\implies V_X \\le V_{\\text{out}} + |V_{THp}|$$\n\n---\n\n### 4. Small-Signal Analysis\n\nLet:\n* $g_{m1}, r_{o1}$: transconductance and output resistance of $M_1$ (including body effect: $g_{m1}' = g_{m1} + g_{mb1}$).\n* $g_{m2}, r_{o2}$: transconductance and output resistance of $M_2$.\n* $R_D$: output impedance of current source $I_1$.\n* $R_S$: output impedance of the current sink $I_B$.\n\n---\n\n#### A. Ideal Case ($\\lambda = 0$, $r_o \\to \\infty$)\n1. **Closed-Loop Transimpedance ($R_m$):**\n   * Since $I_1$ is an ideal current source ($R_D = \\infty$), the small-signal current through $M_1$ must be zero: $i_{d1} = 0$.\n   * Since $i_{d1} = -g_{m1}' v_x = 0$, Node $X$ acts as a **virtual ground**:\n     $$v_x = 0 \\implies R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = 0$$\n   * By KCL at Node $X$:\n     $$i_{\\text{in}} + i_{d2} = 0 \\implies i_{\\text{in}} - g_{m2} v_{\\text{out}} = 0$$\n     $$R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2}}$$\n\n2. **Input and Output Impedances:**\n   * **Input Impedance:** $R_{\\text{in}} = 0$\n   * **Output Impedance:** Applying a test voltage $v_t$ at $V_{\\text{out}}$, $M_2$ injects $g_{m2} v_t$ into Node $X$, which is conveyed through $M_1$ back to the output node:\n     $$R_{\\text{out}} = \\frac{1}{g_{m2}}$$\n\n---\n\n#### B. Detailed Analysis (Finite Output Resistances)\n\n1. **Loop Gain ($T$):**\n   Breaking the feedback loop at the gate of $M_2$:\n   * A test voltage $v_{\\text{test}}$ at the gate of $M_2$ causes a drain current $i_{d2} = -g_{m2} v_{\\text{test}}$.\n   * This current flows into Node $X$, which presents an impedance:\n     $$R_X \\approx r_{o2} \\parallel R_S$$\n   * The voltage at Node $X$ is amplified to the output by the common-gate stage with gain $A_{v,CG} \\approx 1 + g_{m1}' r_{o1}$.\n   * The returned voltage is:\n     $$v_{\\text{return}} \\approx -g_{m2} (r_{o2} \\parallel R_S)(1 + g_{m1}' r_{o1}) v_{\\text{test}}$$\n   * Hence, the **loop gain** is:\n     $$T \\approx g_{m2} g_{m1}' r_{o1} (r_{o2} \\parallel R_S)$$\n   This loop gain is very large (product of two intrinsic transistor gains).\n\n2. **Closed-Loop Gain ($R_m$):**\n   Using feedback theory ($R_{m} = \\frac{R_{m,\\text{open}}}{1 + T}$):\n   $$R_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx \\frac{1}{g_{m2}}$$\n\n3. **Input Resistance ($R_{\\text{in}}$):**\n   Because of shunt feedback at the input, the input impedance is reduced by $(1 + T)$:\n   $$R_{\\text{in}} = \\frac{R_{\\text{in,open}}}{1 + T} \\approx \\frac{r_{o2} \\parallel R_S}{g_{m2} g_{m1}' r_{o1} (r_{o2} \\parallel R_S)} = \\frac{1}{g_{m2} g_{m1}' r_{o1}}$$\n   Notice that $R_{\\text{in}}$ is lowered by a factor of $g_{m2} r_{o1}$ compared to a conventional common-gate stage ($1/g_{m1}'$).\n\n4. **Output Resistance ($R_{\\text{out}}$):**\n   Because of shunt feedback at the output:\n   $$R_{\\text{out}} = \\frac{R_{\\text{out,open}}}{1 + T} \\approx \\frac{g_{m1}' r_{o1} (r_{o2} \\parallel R_S)}{g_{m2} g_{m1}' r_{o1} (r_{o2} \\parallel R_S)} = \\frac{1}{g_{m2}}$$\n\n---\n\n### 5. Summary of Key Performance Metrics\n\n| Parameter | Ideal Expression | With Finite $r_o$ |\n| :--- | :---: | :---: |\n| **Transimpedance Gain ($R_m = v_{\\text{out}}/i_{\\text{in}}$)** | $\\dfrac{1}{g_{m2}}$ | $\\approx \\dfrac{1}{g_{m2}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $0$ | $\\approx \\dfrac{1}{g_{m2} g_{m1}' r_{o1}}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\dfrac{1}{g_{m2}}$ | $\\approx \\dfrac{1}{g_{m2}}$ |\n| **Loop Gain ($T$)** | $\\infty$ | $\\approx g_{m2} g_{m1}' r_{o1} (r_{o2} \\parallel R_S)$ |\n\n---\n\n### 6. Practical Significance & Application\n\n* **Optical Receivers:** In optical communication systems, this architecture is frequently used as the front-end TIA connected to a photodiode. \n* **Bandwidth Enhancement:** A photodiode typically presents a large parasitic capacitance $C_{\\text{in}}$ at Node $X$. Because the feedback loop creates an extremely small input impedance:\n  $$\\omega_{p,\\text{in}} \\approx \\frac{1}{R_{\\text{in}} C_{\\text{in}}} \\approx \\frac{g_{m2} g_{m1}' r_{o1}}{C_{\\text{in}}}$$\n  the input pole is pushed to very high frequencies, preventing the photodiode capacitance from severely limiting the amplifier's bandwidth.",
        "format": "markdown",
        "sha256": "e0800da870ccb2fd72dc87875dbbc887df3f4b4bf4dd933fb7e7adf19f0ee3cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS, M2 as the PMOS feedback device driven by Vout, and the feedback path to the input node. It gives the key low-input-resistance result and the expected transimpedance and output resistance of approximately 1/gm2; ancillary analysis does not change the essential answer.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 17794,
        "total_tokens": 18883,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15071,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 17794,
        "total_tokens": 18883,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15071,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the circuit does **not** fail to oscillate if the three load capacitors become arbitrarily large (assuming they remain identical). It will simply oscillate at an arbitrarily low frequency.\n\nHere is the detailed explanation from both small-signal (frequency-domain) and large-signal (time-domain) perspectives:\n\n---\n\n### 1. Small-Signal Analysis (Barkhausen Criteria)\n\nEach stage can be modeled as an inverting amplifier with a low-frequency small-signal gain of $-A_0$ (where $A_0 = g_m R_{\\text{out}}$) and an output pole set by the output resistance $R_{\\text{out}}$ and the load capacitance $C_{\\text{L}}$:\n\n$$\\omega_0 = \\frac{1}{R_{\\text{out}} C_{\\text{L}}}$$\n\nThe transfer function of each stage is:\n$$H(s) = \\frac{-A_0}{1 + \\frac{s}{\\omega_0}}$$\n\nThe total loop gain for the three identical stages is:\n$$T(s) = H(s)^3 = \\frac{-A_0^3}{\\left(1 + \\frac{s}{\\omega_0}\\right)^3}$$\n\n#### Phase Condition:\nFor the circuit to oscillate, the three stages must together contribute an additional $180^\\circ$ of phase shift (to complement the $180^\\circ$ inversion inherent to the three inverting stages, giving a total loop phase of $360^\\circ$ or $0^\\circ$). \n\nBecause the three stages are identical, each stage must provide a frequency-dependent phase shift of $60^\\circ$:\n$$\\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 60^\\circ \\implies \\frac{\\omega_{\\text{osc}}}{\\omega_0} = \\tan(60^\\circ) = \\sqrt{3}$$\n\nThus, the oscillation frequency is:\n$$\\omega_{\\text{osc}} = \\sqrt{3}\\omega_0 = \\frac{\\sqrt{3}}{R_{\\text{out}} C_{\\text{L}}}$$\n\n#### Magnitude Condition:\nAt the oscillation frequency $\\omega_{\\text{osc}}$, the gain of each individual stage is:\n$$|H(j\\omega_{\\text{osc}})| = \\frac{A_0}{\\sqrt{1 + (\\omega_{\\text{osc}}/\\omega_0)^2}} = \\frac{A_0}{\\sqrt{1 + 3}} = \\frac{A_0}{2}$$\n\nFor the oscillation to start and sustain, the loop gain magnitude must be at least unity:\n$$|T(j\\omega_{\\text{osc}})| = |H(j\\omega_{\\text{osc}})|^3 = \\left(\\frac{A_0}{2}\\right)^3 \\ge 1 \\implies A_0 \\ge 2$$\n\n#### Conclusion from Small-Signal Analysis:\n* The condition for oscillation is **$A_0 \\ge 2$**, which depends **only** on the DC gain of the inverters and is **completely independent of $C_{\\text{L}}$**.\n* As $C_{\\text{L}} \\to \\infty$, the oscillation frequency $\\omega_{\\text{osc}} \\propto \\frac{1}{C_{\\text{L}}}$ approaches zero, but the loop gain at $\\omega_{\\text{osc}}$ remains $\\frac{A_0^3}{8} \\ge 1$. Thus, the criteria for oscillation are always satisfied.\n\n---\n\n### 2. Large-Signal (Time-Domain) Perspective\n\nIn large-signal switching operation:\n* The period of oscillation is determined by the propagation delay $t_{\\text{d}}$ of each inverter:\n  $$T = 2 \\times N \\times t_{\\text{d}} = 6 t_{\\text{d}}$$\n* The propagation delay is dominated by charging and discharging the load capacitance:\n  $$t_{\\text{d}} \\approx \\frac{C_{\\text{L}} \\Delta V}{I_{\\text{avg}}}$$\n* As $C_{\\text{L}}$ becomes arbitrarily large, the charging and discharging times grow proportionally. The nodes still swing rail-to-rail, but the transitions take longer, meaning the period $T$ becomes arbitrarily large ($f_{\\text{osc}} \\to 0$), but the circuit never ceases to oscillate.\n\n---\n\n### Key Contrast: What if only *one* capacitor were made large?\nIf only **one** capacitor were made arbitrarily large ($C_1 \\to \\infty$ while $C_2, C_3$ remained small), that stage's gain would roll off to near zero before the other two stages could contribute enough phase shift. In that asymmetric case, the loop gain would drop below 1 and the circuit **would fail to oscillate**. Because **all three** capacitors scale equally, the symmetry preserves the necessary loop gain at the new (lower) oscillation frequency.",
        "format": "markdown",
        "sha256": "4483a05a1f85931d7d6271c78e15df6efb7efdedfb8466637359af127ce41513"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that identical capacitors lower the oscillation frequency without changing the oscillation condition. The small-signal phase and gain analysis and the delay argument both support the result.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 7697,
        "total_tokens": 8807,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 7697,
        "total_tokens": 8807,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the circuit does not fail to oscillate if the three capacitors become arbitrarily large. Instead, it will continue to oscillate, but at an arbitrarily low frequency.\n\n---\n\n### 1. Small-Signal Analysis (Barkhausen Criteria)\n\nModeling each of the three identical inverter stages as a first-order amplifier:\n$$H(s) = \\frac{-A_0}{1 + \\frac{s}{\\omega_0}}$$\n\nwhere:\n* $A_0 = g_m R_{\\text{out}}$ is the DC voltage gain of each inverter,\n* $\\omega_0 = \\frac{1}{R_{\\text{out}} C_{\\text{L}}}$ is the pole frequency of each stage.\n\nThe open-loop gain $T(s)$ of the three-stage cascade is:\n$$T(s) = [H(s)]^3 = \\frac{-A_0^3}{\\left(1 + \\frac{s}{\\omega_0}\\right)^3}$$\n\n#### Phase Condition\nThe three inverters introduce an inherent DC phase inversion of $-180^\\circ$ (since $(-1)^3 = -1$). For oscillation to occur, the three poles must contribute an additional frequency-dependent phase shift of $180^\\circ$ (i.e., $60^\\circ$ per stage):\n$$3 \\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 180^\\circ \\implies \\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 60^\\circ$$\n\n$$\\omega_{\\text{osc}} = \\sqrt{3}\\,\\omega_0 = \\frac{\\sqrt{3}}{R_{\\text{out}} C_{\\text{L}}}$$\n\n#### Gain Condition\nAt the oscillation frequency $\\omega_{\\text{osc}}$, the magnitude of the loop gain is:\n$$|T(j\\omega_{\\text{osc}})| = \\frac{A_0^3}{\\left(\\sqrt{1 + (\\omega_{\\text{osc}}/\\omega_0)^2}\\right)^3} = \\frac{A_0^3}{\\left(\\sqrt{1 + 3}\\right)^3} = \\frac{A_0^3}{2^3} = \\frac{A_0^3}{8}$$\n\nBy Barkhausen’s criterion, sustained oscillation requires:\n$$|T(j\\omega_{\\text{osc}})| \\ge 1 \\implies A_0 \\ge 2$$\n\n**Key Takeaway:** The condition for oscillation ($A_0 \\ge 2$) is **completely independent of $C_{\\text{L}}$**. As $C_{\\text{L}} \\to \\infty$, $\\omega_{\\text{osc}} \\to 0$, but the loop gain at the oscillation frequency remains constant at $A_0^3/8$.\n\n---\n\n### 2. Large-Signal (Time-Domain) Analysis\n\nFrom a digital switching perspective:\n* An odd number of inverters connected in a closed ring possesses **no stable DC state**; the circuit is inherently unstable.\n* The delay of each stage $t_d$ is determined by charging and discharging $C_{\\text{L}}$:\n  $$t_d \\propto \\frac{C_{\\text{L}} \\Delta V}{I_{\\text{avg}}}$$\n* The period of oscillation is:\n  $$T_{\\text{osc}} = 2 \\times N \\times t_d = 6\\,t_d \\propto C_{\\text{L}}$$\n\nAs $C_{\\text{L}}$ becomes arbitrarily large, the transition times and propagation delays increase proportionally, making the period arbitrarily long ($T_{\\text{osc}} \\to \\infty$), but switching and oscillation never cease.\n\n---\n\n*(Note: If only **one** capacitor were made arbitrarily large while the others remained small, the circuit **would** fail to oscillate because that single dominant pole would attenuate the loop gain before the other two stages could contribute enough phase shift. However, because **all three** capacitors scale together, the phase-gain balance is perfectly preserved.)*",
        "format": "markdown",
        "sha256": "a8bcbe12a345424ea8869733f68470682176dc19d55f5be6b7e2c6620a7658b8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors can grow without stopping oscillation, while the frequency falls in proportion to 1/CL. Its small-signal phase and gain analysis matches the required condition, and its single-node loading contrast is also correct.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 4451,
        "total_tokens": 5561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 4451,
        "total_tokens": 5561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, the circuit does not fail to oscillate.** \n\nAs the three load capacitances $C_{\\text{L}}$ become arbitrarily large, the circuit continues to oscillate, but the oscillation frequency decreases inversely with $C_{\\text{L}}$ ($\\omega_{\\text{osc}} \\propto 1/C_{\\text{L}}$).\n\n---\n\n### 1. Small-Signal (Frequency-Domain) Analysis\n\nTo determine whether the circuit oscillates, we can apply **Barkhausen’s criteria** for oscillation.\n\n1. **Stage Transfer Function:**  \n   Assuming each inverter has an effective small-signal low-frequency gain of $-A_0$ and an output resistance $R_{\\text{out}}$, the transfer function of a single loaded stage is:\n   $$H(s) = -\\frac{A_0}{1 + \\frac{s}{\\omega_0}}$$\n   where $\\omega_0 = \\frac{1}{R_{\\text{out}} C_{\\text{L}}}$.\n\n2. **Open-Loop Gain:**  \n   For a three-stage ring oscillator:\n   $$T(s) = [H(s)]^3 = -\\frac{A_0^3}{\\left(1 + \\frac{s}{\\omega_0}\\right)^3}$$\n\n3. **Phase Condition:**  \n   For sustained oscillation, the loop must provide a frequency-dependent phase shift of $180^\\circ$ (since the three inverters already provide a DC phase shift of $180^\\circ \\times 3 \\equiv 180^\\circ$):\n   $$3 \\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 180^\\circ \\implies \\frac{\\omega_{\\text{osc}}}{\\omega_0} = \\tan(60^\\circ) = \\sqrt{3}$$\n   $$\\omega_{\\text{osc}} = \\sqrt{3}\\omega_0 = \\frac{\\sqrt{3}}{R_{\\text{out}} C_{\\text{L}}}$$\n\n4. **Magnitude Condition:**  \n   At this oscillation frequency, the magnitude of the loop gain is:\n   $$|T(j\\omega_{\\text{osc}})| = \\frac{A_0^3}{\\left(\\sqrt{1 + 3}\\right)^3} = \\frac{A_0^3}{8}$$\n   For oscillations to start and build up, we must have:\n   $$|T(j\\omega_{\\text{osc}})| \\ge 1 \\implies A_0 \\ge 2$$\n\nNotice that the condition for oscillation, **$A_0 \\ge 2$**, depends strictly on the low-frequency gain of the inverters and is **completely independent of $C_{\\text{L}}$**. \n\n### Pole Locations\nSolving the characteristic equation $1 + T(s) = 0$:\n$$s = \\omega_0 \\left(\\frac{A_0}{2} - 1\\right) \\pm j \\omega_0 \\frac{\\sqrt{3}A_0}{2}$$\n\nAs long as $A_0 > 2$, the real part of the poles is positive:\n$$\\text{Re}(s) = \\frac{1}{R_{\\text{out}}C_{\\text{L}}}\\left(\\frac{A_0}{2} - 1\\right) > 0$$\nThis places the poles in the **right half-plane (RHP)** for any finite value of $C_{\\text{L}}$, ensuring the circuit is unstable and will oscillate.\n\n---\n\n### 2. Large-Signal (Time-Domain) Analysis\n\nIn large-signal operation, each inverter charges and discharges the capacitance $C_{\\text{L}}$ between $0$ and $V_{\\text{DD}}$:\n* The delay per stage is:\n  $$t_{\\text{d}} \\approx \\frac{C_{\\text{L}} \\Delta V}{I_{\\text{avg}}}$$\n* The total period of oscillation is:\n  $$T_{\\text{osc}} = 2 \\times 3 \\times t_{\\text{d}} \\propto C_{\\text{L}}$$\n\nAs $C_{\\text{L}}$ becomes arbitrarily large, the transition time simply lengthens, increasing the period and lowering the frequency ($f_{\\text{osc}} \\to 0$), but the circuit will continue to switch rail-to-rail.\n\n---\n\n### Important Contrast: What if only *one* capacitor is large?\nIf **only one** capacitor becomes arbitrarily large while the other two remain small:\n* That single capacitor creates a **dominant pole** at a very low frequency.\n* The loop gain drops significantly (at $-20\\text{ dB/decade}$) before the other two stages can introduce enough phase shift to reach $180^\\circ$.\n* As a result, the loop gain falls well below unity before meeting the phase criterion, and the circuit **fails to oscillate**.\n\nBecause **all three** capacitors increase simultaneously and symmetrically, each stage contributes equally ($60^\\circ$) to the phase shift, maintaining the condition for oscillation regardless of how large $C_{\\text{L}}$ is.",
        "format": "markdown",
        "sha256": "0445ee8977c10af9af00e4036d60662b0736b876d441b4f12151e6ff133be600"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency, with delay and frequency scaling inversely with capacitance. The phase and gain conditions also correctly show that the oscillation condition is independent of the equal load capacitances.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 5897,
        "total_tokens": 7007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 5897,
        "total_tokens": 7007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the three load capacitors $C_{\\text{L}}$ in the three-stage inverter-based ring oscillator are doubled:\n\n### **Summary of Results**\n* **Oscillation Frequency ($f_0$):** Halved (decreases by a factor of $2$).\n* **Phase Noise at a fixed frequency offset ($\\Delta f$):** **Decreases by $6\\text{ dB}$** (improves by a factor of $4$).\n* **Phase Noise at a fixed relative offset ($\\Delta f / f_0$):** **Remains unchanged** ($0\\text{ dB}$ change).\n* **Power Dissipation ($P$):** **Remains unchanged**.\n\n---\n\n### **Step-by-Step Derivation & Intuition**\n\n#### 1. Impact on Oscillation Frequency ($f_0$)\nThe delay of each inverter stage $t_{\\text{d}}$ is set by the time required to charge/discharge the load capacitor $C_{\\text{L}}$:\n$$t_{\\text{d}} \\approx \\frac{C_{\\text{L}} V_{\\text{DD}}}{I_{\\text{avg}}}$$\n\nThe period of oscillation for an $N$-stage ring ($N = 3$) is $T_0 = 2N t_{\\text{d}} = 6 t_{\\text{d}}$.  \nBecause $t_{\\text{d}} \\propto C_{\\text{L}}$, doubling $C_{\\text{L}}$ doubles the period ($T_0 \\to 2T_0$) and **halves the oscillation frequency**:\n$$f_0 \\propto \\frac{1}{C_{\\text{L}}} \\implies f_0 \\to \\frac{f_0}{2}$$\n\n---\n\n#### 2. Impact on Time Jitter per Transition\nDuring each switching event:\n1. **Noise Voltage:** The total integrated noise bandwidth at the output node scales inversely with $C_{\\text{L}}$ (e.g., $kT/C_{\\text{L}}$ noise). Doubling $C_{\\text{L}}$ halves the noise voltage variance:\n   $$\\sigma_v^2 \\propto \\frac{kT}{C_{\\text{L}}} \\quad (\\text{halved})$$\n\n2. **Slew Rate:** The rate of change of the voltage is $SR = \\frac{\\mathrm{d}V}{\\mathrm{d}t} \\approx \\frac{I}{C_{\\text{L}}}$, which is halved when $C_{\\text{L}}$ is doubled.\n\n3. **Timing Jitter per Stage:** The timing error at the threshold crossing is $\\Delta t = \\frac{\\Delta v}{SR}$, so the timing variance per transition is:\n   $$\\sigma_{\\Delta t}^2 = \\frac{\\sigma_v^2}{SR^2} \\propto \\frac{kT / C_{\\text{L}}}{(I / C_{\\text{L}})^2} \\propto C_{\\text{L}}$$\n   Therefore, the timing jitter variance per transition **doubles**.\n\n---\n\n#### 3. Accumulation of Jitter over Time\n* Although the timing variance per transition doubles ($\\times 2$), the number of transitions per second ($2N f_0$) is halved ($\\times 1/2$) because the oscillator runs at half the frequency.\n* The total accumulated time variance per unit time (time diffusion) is:\n  $$\\frac{\\sigma_t^2}{\\text{second}} = (\\text{transitions per second}) \\times \\sigma_{\\Delta t}^2 \\propto \\left(\\frac{1}{C_{\\text{L}}}\\right) \\times C_{\\text{L}} = \\text{constant}$$\n  The absolute **timing jitter accumulated per second remains constant**.\n\n---\n\n#### 4. Conversion from Time Jitter to Phase Noise\nPhase perturbation $\\Delta \\phi$ is related to time perturbation $\\Delta t$ through the carrier frequency:\n$$\\Delta \\phi = \\omega_0 \\Delta t \\implies \\sigma_\\phi^2 = \\omega_0^2 \\sigma_t^2$$\n\nBecause $\\omega_0 = 2\\pi f_0$ is halved, $\\omega_0^2$ drops by a factor of $4$ ($-6\\text{ dB}$):\n$$D_\\phi = \\frac{\\sigma_\\phi^2}{\\text{second}} = \\omega_0^2 \\left(\\frac{\\sigma_t^2}{\\text{second}}\\right) \\propto \\omega_0^2 \\propto \\frac{1}{C_{\\text{L}}^2}$$\n\nPhase noise in the $1/f^2$ region at a fixed offset frequency $\\Delta \\omega$ is given by:\n$$\\mathcal{L}(\\Delta \\omega) = \\frac{D_\\phi}{2\\Delta\\omega^2} \\propto \\frac{1}{C_{\\text{L}}^2 \\Delta\\omega^2}$$\n\nWhen $C_{\\text{L}}$ is doubled, $\\mathcal{L}(\\Delta \\omega)$ is divided by $4$:\n$$10 \\log_{10}\\left(\\frac{1}{4}\\right) \\approx \\mathbf{-6\\text{ dB}}$$\n\n---\n\n### **Verification via Oscillator Figure of Merit (FoM)**\nThe standard Figure of Merit for an oscillator is:\n$$\\text{FoM} = 10 \\log_{10} \\left[ \\left(\\frac{f_0}{\\Delta f}\\right)^2 \\frac{1}{\\mathcal{L}(\\Delta f) \\cdot P} \\right]$$\n\n* Dynamic power dissipation is $P = 3 C_{\\text{L}} V_{\\text{DD}}^2 f_0$. Since $f_0 \\propto 1/C_{\\text{L}}$, the power $P$ remains **constant**.\n* The intrinsic FoM of a given topology and technology is constant:\n  $$\\mathcal{L}(\\Delta f) \\propto \\frac{f_0^2}{P} \\propto \\left(\\frac{1}{C_{\\text{L}}}\\right)^2 = \\frac{1}{C_{\\text{L}}^2}$$\n\nThis confirms that the phase noise at a fixed offset $\\Delta f$ **improves (decreases) by $6\\text{ dB}$**.",
        "format": "markdown",
        "sha256": "1fd57c06abb1f9c2595aff5f958b3205401345120bcf31ce7c98b806e0541096"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by a factor of four (6 dB) at a fixed offset; the relative-offset result is also consistent with the golden solution.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 16617,
        "total_tokens": 17726,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 16617,
        "total_tokens": 17726,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "At a fixed offset frequency $\\Delta f$, **the phase noise decreases by $6\\text{ dB}$ (improves by a factor of 4)**.\n\nThis is a classic question (from Ali Sheikholeslami's *Circuit Intuitions* series in the *IEEE Solid-State Circuits Magazine*). It is often considered a \"trick question\" because it defies the common intuition that slowing down circuit edges always degrades phase noise.\n\n---\n\n### Step-by-Step Analysis\n\n#### 1. Effect on Oscillation Frequency ($f_0$)\nThe delay of each inverter stage is dominated by charging and discharging the load capacitance $C_{\\mathrm{L}}$:\n$$t_d \\propto \\frac{C_{\\mathrm{L}} V_{\\mathrm{DD}}}{I_{\\mathrm{avg}}}$$\n\nThe period of oscillation for an $N$-stage ring ($N=3$) is $T_0 = 2N t_d \\propto C_{\\mathrm{L}}$.  \nTherefore, doubling $C_{\\mathrm{L}}$ doubles the period and **halves the oscillation frequency**:\n$$f_0 \\to \\frac{f_0}{2}$$\n\n---\n\n#### 2. Effect on Edge Jitter ($\\sigma_t$)\nWhen $C_{\\mathrm{L}}$ is doubled:\n* **Slew Rate ($SR$):** The rate at which the voltage transitions across the threshold is $SR = \\frac{I}{C_{\\mathrm{L}}}$. Doubling $C_{\\mathrm{L}}$ **halves the slew rate** ($SR \\to SR / 2$).\n* **Noise Voltage ($\\sigma_v$):** The total integrated thermal noise voltage on the node capacitance is given by $kT/C$ noise:\n  $$\\sigma_v^2 = \\frac{kT}{C_{\\mathrm{L}}}$$\n  Doubling $C_{\\mathrm{L}}$ **halves the voltage noise variance** ($\\sigma_v^2 \\to \\sigma_v^2 / 2$).\n\nThe resulting time jitter variance per transition is:\n$$\\sigma_t^2 = \\frac{\\sigma_v^2}{SR^2} \\propto \\frac{kT / C_{\\mathrm{L}}}{(I / C_{\\mathrm{L}})^2} \\propto C_{\\mathrm{L}}$$\n\nThus, the timing jitter variance per cycle **doubles (+3 dB)**:\n$$\\sigma_T^2 \\to 2\\sigma_T^2$$\n\n---\n\n#### 3. Effect on Phase Noise ($\\mathcal{L}$)\nAlthough the absolute time jitter $\\sigma_T$ increases, **phase noise measures phase fluctuations ($\\Delta\\phi$), not absolute time fluctuations ($\\Delta t$)**:\n\n$$\\Delta\\phi = \\omega_0 \\Delta t = 2\\pi f_0 \\Delta t$$\n\nBecause $f_0$ has been halved, the same timing error corresponds to **half the phase error**:\n$$\\sigma_\\phi^2 = (2\\pi f_0)^2 \\sigma_T^2 \\propto \\left(\\frac{1}{C_{\\mathrm{L}}}\\right)^2 \\cdot C_{\\mathrm{L}} = \\frac{1}{C_{\\mathrm{L}}}$$\n\nFurthermore, phase noise at a fixed frequency offset $\\Delta f$ from the carrier relates to cycle jitter and frequency as:\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{f_0^3 \\sigma_T^2}{\\Delta f^2}$$\n\nSubstituting the new values:\n$$\\mathcal{L}_{\\text{new}}(\\Delta f) \\propto \\left(\\frac{f_0}{2}\\right)^3 \\cdot \\left(2\\sigma_T^2\\right) = \\frac{1}{4} \\cdot \\left(f_0^3 \\sigma_T^2\\right) = \\frac{1}{4}\\mathcal{L}_{\\text{old}}(\\Delta f)$$\n\nIn decibels:\n$$\\Delta \\mathcal{L} = 10 \\log_{10}\\left(\\frac{1}{4}\\right) \\approx \\mathbf{-6\\text{ dB}}$$\n\n---\n\n### Verification via Hajimiri’s Time-Variant Phase Noise Model\nIn Hajimiri’s model, the phase noise in the $1/f^2$ region is:\n$$\\mathcal{L}(\\Delta \\omega) = \\frac{\\Gamma_{\\text{rms}}^2}{2 q_{\\text{max}}^2 \\Delta \\omega^2} \\cdot \\frac{\\overline{i_n^2}}{\\Delta f}$$\n\n* $q_{\\text{max}} = C_{\\mathrm{L}} V_{\\text{swing}}$ is the maximum charge swing on the capacitor. Doubling $C_{\\mathrm{L}}$ doubles $q_{\\text{max}}$, so $q_{\\text{max}}^2$ **quadruples**.\n* The impulse sensitivity function (ISF) $\\Gamma(\\phi)$ is dimensionless and normalized to phase, so $\\Gamma_{\\text{rms}}$ remains unchanged.\n* The device noise $\\overline{i_n^2}/\\Delta f$ is unchanged because the transistor dimensions and bias currents are unchanged.\n\nConsequently:\n$$\\mathcal{L}(\\Delta \\omega) \\propto \\frac{1}{q_{\\text{max}}^2} \\propto \\frac{1}{C_{\\mathrm{L}}^2} = \\frac{1}{4} \\implies \\mathbf{-6\\text{ dB}}$$\n\n---\n\n### Summary\n* **Oscillation frequency ($f_0$):** Halved ($-50\\%$)\n* **Time jitter variance ($\\sigma_T^2$):** Doubled ($+3\\text{ dB}$)\n* **Phase noise at a fixed offset $\\Delta f$:** **Decreases by $6\\text{ dB}$ (improves)**\n* *(Note: If measured at a constant relative offset $\\Delta f / f_0$, the phase noise remains unchanged.)*",
        "format": "markdown",
        "sha256": "05dab6f2df8169bab45c9219851da4b59762190d5d82fa60b948e187d51d4b09"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that phase noise at a fixed offset falls by a factor of four (6 dB) and supports this with the halving of oscillation frequency. It also correctly notes the unchanged result at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 20694,
        "total_tokens": 21803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19424,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 20694,
        "total_tokens": 21803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19424,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the three load capacitors $C_{\\text{L}}$ in the three-stage CMOS ring oscillator are doubled ($C_{\\text{L}} \\to 2C_{\\text{L}}$), the effect on phase noise depends on how the offset frequency is defined:\n\n---\n\n### **Summary of Results**\n\n1. **At a fixed offset frequency ($\\Delta \\omega$ or $\\Delta f$ from the carrier):**  \n   * **Phase noise decreases by a factor of $4$ (improves by $6\\text{ dB}$)**, meaning $\\mathcal{L}(\\Delta \\omega)$ becomes $6\\text{ dB}$ lower (more negative in $\\text{dBc/Hz}$).\n2. **At a fixed relative offset frequency ($\\Delta \\omega / \\omega_0 = \\text{const}$):**  \n   * **Phase noise remains unchanged ($0\\text{ dB}$ change).**\n3. **Carrier Frequency ($\\omega_0$):**  \n   * The oscillation frequency is **halved** ($\\omega_0 \\to \\omega_0 / 2$).\n\n---\n\n### **Detailed Explanations**\n\nWe can confirm this result through three standard analytical models:\n\n#### **1. Using Razavi’s Phase Noise Model (Power–Frequency Relation)**\nIn a CMOS ring oscillator, the phase noise in the $1/f^2$ region is given by:\n$$\\mathcal{L}(\\Delta \\omega) \\propto \\frac{k T}{P} \\left(\\frac{\\omega_0}{\\Delta \\omega}\\right)^2$$\n\n* **Oscillation Frequency ($\\omega_0$):**  \n  The stage delay is $\\tau_d \\propto C_{\\text{L}}$, so the period is $T_0 \\propto C_{\\text{L}}$. Consequently, the oscillation frequency is inversely proportional to $C_{\\text{L}}$:\n  $$\\omega_0 \\propto \\frac{1}{C_{\\text{L}}}$$\n  Doubling $C_{\\text{L}}$ halves the frequency: $\\omega_0 \\to \\frac{\\omega_0}{2}$.\n\n* **Power Dissipation ($P$):**  \n  Dynamic power dissipation per cycle is $P = N f_0 C_{\\text{L}} V_{\\text{DD}}^2$. Because $f_0 \\propto 1/C_{\\text{L}}$, the product $f_0 C_{\\text{L}}$ remains constant, so **power consumption $P$ is unchanged**.\n\n* **Phase Noise:**  \n  At a fixed offset $\\Delta \\omega$:\n  $$\\mathcal{L}(\\Delta \\omega) \\propto \\frac{\\omega_0^2}{P} \\propto \\left(\\frac{1}{C_{\\text{L}}}\\right)^2 = \\frac{1}{C_{\\text{L}}^2}$$\n  Doubling $C_{\\text{L}}$ gives:\n  $$\\mathcal{L}_{\\text{new}}(\\Delta \\omega) = \\frac{1}{4}\\mathcal{L}_{\\text{old}}(\\Delta \\omega) \\quad \\implies \\quad 10\\log_{10}\\left(\\frac{1}{4}\\right) \\approx \\mathbf{-6\\text{ dB}}$$\n\n---\n\n#### **2. Using Hajimiri’s Time-Variant Model (ISF)**\nAccording to Hajimiri's model:\n$$\\mathcal{L}(\\Delta \\omega) = \\frac{\\Gamma_{\\text{rms}}^2}{2 q_{\\max}^2} \\frac{\\overline{i_n^2}/\\Delta f}{2 \\Delta \\omega^2}$$\n\n* **Maximum Charge Swing ($q_{\\max}$):**  \n  $$q_{\\max} = C_{\\text{L}} V_{\\text{swing}} = C_{\\text{L}} V_{\\text{DD}} \\propto C_{\\text{L}}$$\n  When $C_{\\text{L}}$ is doubled, $q_{\\max}$ doubles, which means $q_{\\max}^2$ increases by a factor of **$4$**.\n* **Impulse Sensitivity Function ($\\Gamma_{\\text{rms}}$) and Noise Current:**  \n  Since doubling $C_{\\text{L}}$ uniformly stretches the waveforms in time, the normalized shape of the ISF over a cycle is unchanged ($\\Gamma_{\\text{rms}} = \\text{const}$). Furthermore, the fraction of the period spent switching remains the same, so the cycle-averaged noise current $\\overline{i_n^2}/\\Delta f$ is constant.\n* Therefore:\n  $$\\mathcal{L}(\\Delta \\omega) \\propto \\frac{1}{q_{\\max}^2} \\propto \\frac{1}{C_{\\text{L}}^2} \\quad \\implies \\quad \\mathbf{-6\\text{ dB}}$$\n\n---\n\n#### **3. Using Time-Domain Jitter Analysis**\n* The slew rate during a switching transition is $S = \\frac{dV}{dt} = \\frac{I_{\\text{drive}}}{C_{\\text{L}}} \\propto \\frac{1}{C_{\\text{L}}}$.\n* The voltage noise variance at the threshold is $\\sigma_v^2 \\approx \\frac{k T}{C_{\\text{L}}}$.\n* The single-stage timing jitter variance is:\n  $$\\sigma_t^2 = \\frac{\\sigma_v^2}{S^2} \\propto \\frac{1/C_{\\text{L}}}{(1/C_{\\text{L}})^2} = C_{\\text{L}}$$\n* The period jitter variance is $\\sigma_T^2 = 2N \\sigma_t^2 \\propto C_{\\text{L}}$.\n* Converting period jitter variance to phase noise:\n  $$\\mathcal{L}(\\Delta \\omega) \\propto \\frac{\\sigma_T^2}{T_0^3 \\Delta \\omega^2}$$\n* Since $T_0 \\propto C_{\\text{L}}$, we have $T_0^3 \\propto C_{\\text{L}}^3$, leading to:\n  $$\\mathcal{L}(\\Delta \\omega) \\propto \\frac{C_{\\text{L}}}{C_{\\text{L}}^3 \\Delta \\omega^2} = \\frac{1}{C_{\\text{L}}^2 \\Delta \\omega^2} \\quad \\implies \\quad \\mathbf{-6\\text{ dB}}$$\n\n---\n\n### **Summary Table**\n\n| Parameter | Proportionality to $C_{\\text{L}}$ | Effect of Doubling $C_{\\text{L}}$ |\n| :--- | :--- | :--- |\n| **Oscillation Frequency ($\\omega_0$)** | $\\propto 1/C_{\\text{L}}$ | Halved ($\\times 0.5$) |\n| **Power Consumption ($P$)** | Constant | Unchanged |\n| **Period Jitter ($\\sigma_T$)** | $\\propto \\sqrt{C_{\\text{L}}}$ | Increases by $\\sqrt{2}$ ($\\approx +41\\%$) |\n| **Phase Noise at fixed $\\Delta \\omega$** | $\\propto 1/C_{\\text{L}}^2$ | **Improves by $6\\text{ dB}$ (divided by 4)** |\n| **Phase Noise at relative offset $\\frac{\\Delta \\omega}{\\omega_0}$** | Constant | **Unchanged ($0\\text{ dB}$)** |",
        "format": "markdown",
        "sha256": "55f0cb605fb7dddacd61bdee21381e0f12bcedc4c5afd05bb8d6dc477f5ddbc5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by a factor of four (about 6 dB) at a fixed offset; the fixed-relative-offset qualification is also correct.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 14204,
        "total_tokens": 15313,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12621,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 14204,
        "total_tokens": 15313,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12621,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit fails to oscillate if $C_L$ becomes arbitrarily large.**\n\nWhile digital intuition might suggest that a large $C_L$ merely increases the delay of the first inverter—thereby lowering the oscillation frequency—in reality, the circuit settles to a stable DC operating point (around $V_{DD}/2$) and stops oscillating entirely. \n\nThis behavior can be understood from three complementary perspectives:\n\n---\n\n### 1. Small-Signal Analysis & Barkhausen Criteria\n\nModel each inverter around its DC bias point as a linear amplifier with DC gain $-A_0$ (where $A_0 > 1$). \n- The two unloaded inverters have high-frequency poles at $\\omega_0 = 1 / (R_{out} C_{par})$.\n- The loaded inverter has a pole at $\\omega_{p1} = 1 / (R_{out} C_L)$.\n\nThe open-loop transfer function is:\n$$H(s) = -\\frac{A_0^3}{\\left(1 + \\frac{s}{\\omega_{p1}}\\right)\\left(1 + \\frac{s}{\\omega_0}\\right)^2}$$\n\nFor sustained oscillation, the Barkhausen criteria require:\n1. **Phase condition:** The frequency-dependent phase shift must reach $-180^\\circ$ at the oscillation frequency $\\omega_{\\text{osc}}$:\n   $$\\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_{p1}}\\right) + 2\\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 180^\\circ$$\n\n   Since a single pole can contribute at most $90^\\circ$ of phase shift:\n   $$\\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_{p1}}\\right) < 90^\\circ \\implies 2\\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) > 90^\\circ \\implies \\omega_{\\text{osc}} > \\omega_0$$\n\n   This means that **$\\omega_{\\text{osc}}$ cannot drop below $\\omega_0$**, no matter how large $C_L$ is.\n\n2. **Gain condition:** At $\\omega_{\\text{osc}}$, the loop gain must satisfy $|H(j\\omega_{\\text{osc}})| \\ge 1$:\n   $$|H(j\\omega_{\\text{osc}})| = \\frac{A_0}{\\sqrt{1 + \\left(\\frac{\\omega_{\\text{osc}}}{\\omega_{p1}}\\right)^2}} \\cdot \\frac{A_0^2}{1 + \\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right)^2}$$\n\n   Since $\\omega_{\\text{osc}} > \\omega_0$ and $\\omega_{p1} \\to 0$ as $C_L \\to \\infty$:\n   $$\\frac{\\omega_{\\text{osc}}}{\\omega_{p1}} \\to \\infty \\implies |H(j\\omega_{\\text{osc}})| \\approx \\frac{A_0^3 \\omega_{p1}}{\\omega_{\\text{osc}} \\left[1 + (\\omega_{\\text{osc}}/\\omega_0)^2\\right]} \\propto \\frac{1}{C_L} \\to 0$$\n\nBecause the loop gain falls well below unity at the phase crossover frequency, the circuit **cannot satisfy the Barkhausen criterion**, and oscillations cannot start from thermal noise.\n\n---\n\n### 2. Feedback Control & Dominant-Pole Compensation\n\nA 3-stage ring oscillator is simply a three-stage amplifier configured in negative feedback with a loop gain of $-A_0^3$ at DC.\n\n* In a typical ring oscillator, the three poles are located close to each other at high frequencies, creating a large negative phase margin that leads to instability and oscillation.\n* Connecting an arbitrarily large capacitor $C_L$ at one node performs **dominant-pole compensation** (the exact method used to stabilize operational amplifiers). \n\nAs $C_L \\to \\infty$, the dominant pole $\\omega_{p1}$ moves so close to the origin that the loop gain drops below unity well before the other two poles contribute any significant phase shift. The phase margin approaches $+90^\\circ$, driving all closed-loop poles into the **left half of the $s$-plane** (LHP). Consequently, the DC operating point becomes asymptotically stable, and small-signal perturbations decay rather than grow.\n\n---\n\n### 3. Large-Signal Dynamics\n\nEven if large initial conditions are assumed (e.g., $C_L$ starting fully discharged at $0\\text{ V}$):\n\n1. Because $C_L$ is arbitrarily large compared to the parasitic capacitances at the other nodes, the system exhibits two widely separated timescales.\n2. By singular perturbation theory, the fast inverters (stages 2 and 3) remain in quasi-static equilibrium relative to the slow node voltage $V_1$. \n3. Stages 2 and 3 form a non-inverting buffer whose static transfer curve is monotonically increasing: $V_3 \\approx f(V_1)$ with $f' > 0$.\n4. Stage 1 is inverting, so the current charging $C_L$ is $I_1(V_3) = I_1(f(V_1))$, which is a strictly **decreasing** function of $V_1$.\n5. The circuit reduces to a **one-dimensional first-order dynamical system**:\n   $$C_L \\frac{dV_1}{dt} = g(V_1), \\quad \\text{where } g'(V_1) < 0$$\n\nBy the Poincaré–Bendixson theorem, a continuous one-dimensional autonomous system cannot oscillate. $V_1(t)$ simply relaxes monotonically to the unique DC equilibrium point ($V_1 \\approx V_{DD}/2$) and stays there.\n\n---\n\n### Conclusion\n**Yes, the circuit fails to oscillate.** The large capacitor stabilizes the negative feedback loop via dominant-pole compensation, causing the circuit to settle to a steady DC bias voltage.",
        "format": "markdown",
        "sha256": "7ce3c264ec5a24d486940f2a0032ca6852c4d8ca0a45fdc4755a6b9d6900c861"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that an arbitrarily large load on one node creates a dominant low-frequency pole, driving loop gain below unity at the phase crossover and preventing sustained oscillation. The additional small-signal and time-domain explanations are consistent with the essential answer.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 13012,
        "total_tokens": 14120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11691,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 13012,
        "total_tokens": 14120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11691,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit fails to oscillate if $C_L$ becomes arbitrarily large.**\n\nThis can be understood through both **small-signal frequency-domain analysis** (Barkhausen criteria) and **large-signal time-domain analysis**.\n\n---\n\n### 1. Small-Signal Analysis (Frequency Domain)\n\nAround the DC operating point (where all inverters are biased near $V_{DD}/2$), each inverter can be modeled as an amplifier with small-signal gain $-A_0$ and output resistance $R_{out}$.\n\n* The stage loaded by $C_L$ introduces a dominant pole at:\n  $$\\omega_1 = \\frac{1}{R_{out1} C_L}$$\n* The other two stages introduce high-frequency poles due to their parasitic capacitances:\n  $$\\omega_2 \\approx \\omega_3 = \\frac{1}{R_{out} C_{par}}$$\n\nThe small-signal open-loop transfer function is:\n$$T(s) = \\frac{-A_0^3}{\\left(1 + \\frac{s}{\\omega_1}\\right)\\left(1 + \\frac{s}{\\omega_2}\\right)^2}$$\n\n#### Barkhausen Phase Criterion:\nTo satisfy the Barkhausen criterion for oscillation, the poles must provide an additional $180^\\circ$ of phase shift (on top of the negative feedback sign):\n$$\\angle T(j\\omega_{osc}) = -\\arctan\\left(\\frac{\\omega_{osc}}{\\omega_1}\\right) - 2\\arctan\\left(\\frac{\\omega_{osc}}{\\omega_2}\\right) = -180^\\circ$$\n\nAs $C_L \\to \\infty$, the dominant pole moves to the origin ($\\omega_1 \\to 0$). For any non-zero frequency:\n$$\\arctan\\left(\\frac{\\omega_{osc}}{\\omega_1}\\right) \\to 90^\\circ$$\n\nTherefore, the remaining two stages must together provide the remaining $90^\\circ$:\n$$2\\arctan\\left(\\frac{\\omega_{osc}}{\\omega_2}\\right) = 90^\\circ \\implies \\arctan\\left(\\frac{\\omega_{osc}}{\\omega_2}\\right) = 45^\\circ \\implies \\omega_{osc} \\approx \\omega_2$$\n\n#### Barkhausen Gain Criterion:\nNow, evaluate the magnitude of the loop gain at $\\omega_{osc} \\approx \\omega_2$:\n$$|T(j\\omega_{osc})| = \\frac{A_0^3}{\\sqrt{1 + \\left(\\frac{\\omega_2}{\\omega_1}\\right)^2} \\cdot \\left[1 + \\left(\\frac{\\omega_2}{\\omega_2}\\right)^2\\right]} \\approx \\frac{A_0^3}{2\\left(\\frac{\\omega_2}{\\omega_1}\\right)}$$\n\nSince $\\omega_1 \\propto 1/C_L$, as $C_L \\to \\infty$, the pole ratio $\\frac{\\omega_2}{\\omega_1} \\to \\infty$. Consequently:\n$$|T(j\\omega_{osc})| \\to 0 \\ll 1$$\n\nBecause the loop gain drops far below unity at the phase crossover frequency, the Barkhausen gain condition is violated, and the circuit cannot start or sustain oscillations.\n\n---\n\n### 2. Large-Signal / Time-Domain Intuition\n\nOne might intuitively guess that the circuit would simply oscillate at a much lower frequency because $C_L$ takes longer to charge and discharge. However, this is not the case:\n\n1. **Negligible Delay in the Rest of the Loop:** As $C_L \\to \\infty$, the voltage across $C_L$ changes infinitely slowly compared to the delay of the remaining two inverters. \n2. **Instantaneous Negative Feedback:** Because the other two inverters respond practically instantaneously relative to the charging of $C_L$, they act together as a fast non-inverting buffer. The overall loop around $C_L$ behaves like a single-pole negative feedback system.\n3. **No Overshoot:** For a ring oscillator to switch rail-to-rail, the signal traveling through the loop must experience sufficient delay so that the nodes overshoot their switching thresholds. With $C_L$ arbitrarily large, the delay of the loop relative to the charging time constant of $C_L$ vanishes. \n\nInstead of switching back and forth, the negative feedback smoothly pulls and holds the circuit at its stable DC equilibrium point ($V \\approx V_{DD}/2$), causing the circuit to **fail to oscillate**.",
        "format": "markdown",
        "sha256": "bf48d2dce099ef8ad0d521d1e406ac9e03f5c6a50e290945e63c0976be94b9d4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large one-node loading can stop oscillation, explaining that the resulting dominant pole causes loop gain to fall below unity at phase crossover. The approximate phase and time-domain explanations are consistent with the essential mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 12293,
        "total_tokens": 13401,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 12293,
        "total_tokens": 13401,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit fails to oscillate if $C_{\\text{L}}$ becomes arbitrarily large.**\n\nThis can be understood from both a small-signal frequency-domain analysis (Barkhausen criterion) and an amplifier stability perspective (dominant-pole compensation).\n\n---\n\n### 1. Small-Signal / Barkhausen Criterion\n\nModel each inverter around its operating point with a small-signal gain $-A_0$, an output resistance $R_0$, and an intrinsic output capacitance $C_0$.\n\n- The pole at the loaded node is:\n  $$\\omega_{p1} = \\frac{1}{R_0(C_0 + C_{\\text{L}})} \\approx \\frac{1}{R_0 C_{\\text{L}}}$$\n- The poles at the other two nodes are:\n  $$\\omega_{p2} = \\omega_{p3} = \\omega_0 = \\frac{1}{R_0 C_0}$$\n\nThe loop transfer function is:\n$$H(s) = -\\frac{A_0^3}{\\left(1 + \\frac{s}{\\omega_{p1}}\\right)\\left(1 + \\frac{s}{\\omega_0}\\right)^2}$$\n\n#### Oscillation Frequency:\nDue to the negative sign (inversion) at DC, the loop must introduce an additional phase shift of $180^\\circ$ for oscillation:\n$$\\phi(\\omega) = \\arctan\\left(\\frac{\\omega}{\\omega_{p1}}\\right) + 2\\arctan\\left(\\frac{\\omega}{\\omega_0}\\right) = 180^\\circ$$\n\nAs $C_{\\text{L}} \\to \\infty$, $\\omega_{p1} \\to 0$. For any finite frequency $\\omega > 0$, the first stage contributes $\\arctan(\\omega/\\omega_{p1}) \\to 90^\\circ$. \n\nThe remaining two stages must together contribute the remaining $90^\\circ$ ($45^\\circ$ each):\n$$2\\arctan\\left(\\frac{\\omega}{\\omega_0}\\right) = 90^\\circ \\implies \\arctan\\left(\\frac{\\omega}{\\omega_0}\\right) = 45^\\circ \\implies \\omega_{\\text{osc}} = \\omega_0$$\n\n#### Loop Gain at $\\omega_{\\text{osc}}$:\nNow, evaluate the loop gain magnitude at $\\omega_{\\text{osc}} = \\omega_0$:\n$$|H(j\\omega_0)| = \\frac{A_0}{\\sqrt{1 + \\left(\\frac{\\omega_0}{\\omega_{p1}}\\right)^2}} \\cdot \\left(\\frac{A_0}{\\sqrt{1 + \\left(\\frac{\\omega_0}{\\omega_0}\\right)^2}}\\right)^2 \\approx \\frac{A_0 \\omega_{p1}}{\\omega_0} \\cdot \\frac{A_0^2}{2} = \\frac{A_0^3}{2}\\frac{\\omega_{p1}}{\\omega_0}$$\n\nSince $\\omega_{p1} \\propto \\frac{1}{C_{\\text{L}}}$:\n$$\\lim_{C_{\\text{L}} \\to \\infty} |H(j\\omega_0)| = 0$$\n\nBecause the loop gain drops well below unity ($|H(j\\omega_{\\text{osc}})| < 1$), the **Barkhausen criterion is violated**, and oscillations cannot start or be sustained.\n\n---\n\n### 2. Feedback and Stability Perspective (Dominant-Pole Compensation)\n\nA 3-stage ring oscillator is essentially a 3-stage amplifier placed in a negative-feedback loop. \n- Three identical stages typically oscillate because the phase shift reaches $180^\\circ$ before the loop gain drops below unity (i.e., negative phase margin).\n- Adding an arbitrarily large capacitor $C_{\\text{L}}$ to one node introduces a **dominant pole** $\\omega_{p1} \\ll \\omega_0$.\n\nThis is identical to **dominant-pole frequency compensation** used to stabilize op-amps:\n- The unity-gain frequency of the loop is pulled down to $\\omega_u \\approx A_0^3 \\omega_{p1}$.\n- By making $C_{\\text{L}}$ large enough, $\\omega_u \\ll \\omega_0$. At this low frequency, the other two stages contribute virtually zero phase shift.\n- The resulting phase margin approaches $90^\\circ$. \n\nA feedback loop with a large positive phase margin is unconditionally stable; therefore, the circuit will simply settle to its DC operating point ($V_{\\text{in}} = V_{\\text{out}} \\approx V_{\\text{DD}}/2$) and **will not oscillate**.",
        "format": "markdown",
        "sha256": "6ff3d3a4e27259cf1bca4e7aa79081773553cdc0e1cdde73d19b76d93c1a95a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large capacitance on one node creates a dominant pole, causing excessive loop-gain roll-off so the loop cannot meet the oscillation condition. Its approximate phase and stability analysis is consistent with the essential mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 9666,
        "total_tokens": 10774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8646,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 9666,
        "total_tokens": 10774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8646,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the widths of both the NMOS and PMOS devices are doubled, the **phase noise decreases by a factor of 2** (it **improves by $3\\text{ dB}$**). \n\nHere is the step-by-step analysis explaining why:\n\n---\n\n### 1. Scaling of Key Circuit Parameters\n\nAssuming the channel lengths ($L$) remain constant and only the widths ($W$) are doubled ($W \\to 2W$):\n\n* **Capacitance ($C_L$):** The total capacitance at each node is primarily dominated by the gate and drain junction capacitances of the transistors. Since capacitance is proportional to width, the load capacitance doubles:\n  $$C_L \\to 2C_L$$\n\n* **Current ($I_{D}$) and Transconductance ($g_m$):** The driving currents and transconductances of the devices are proportional to $W$:\n  $$I_D \\to 2I_D, \\quad g_m \\to 2g_m$$\n\n* **Oscillation Frequency ($\\omega_0$):** The stage delay is approximately $t_d \\propto \\frac{C_L V_{DD}}{I_D}$. Since both $C_L$ and $I_D$ double, the delay per stage remains unchanged. Consequently, the **oscillation frequency remains roughly constant**:\n  $$\\omega_0 \\to \\text{unchanged}$$\n\n* **Noise Current Spectral Density ($\\overline{i_n^2}/\\Delta f$):** The channel thermal noise current spectral density is proportional to transconductance ($\\overline{i_n^2}/\\Delta f = 4kT\\gamma g_m$):\n  $$\\frac{\\overline{i_n^2}}{\\Delta f} \\to 2 \\times \\frac{\\overline{i_n^2}}{\\Delta f}$$\n\n---\n\n### 2. Effect on Phase Noise\n\nUsing the standard **Hajimiri phase noise model** for ring oscillators:\n\n$$\\mathcal{L}(\\Delta\\omega) = 10 \\log \\left( \\frac{\\Gamma_{\\text{rms}}^2}{2 \\, q_{\\text{max}}^2} \\cdot \\frac{\\overline{i_n^2}/\\Delta f}{\\Delta\\omega^2} \\right)$$\n\n* The maximum charge swing across the node capacitance is $q_{\\text{max}} = C_L V_{\\text{swing}} \\propto W$, so:\n  $$q_{\\text{max}}^2 \\to (2 q_{\\text{max}})^2 = 4 q_{\\text{max}}^2$$\n* The impulse sensitivity function (ISF, $\\Gamma_{\\text{rms}}$) is dimensionless and depends only on the normalized waveform shape, which remains unchanged.\n\nSubstituting the scaled values into the expression:\n$$\\mathcal{L}(\\Delta\\omega) \\propto \\frac{\\overline{i_n^2}/\\Delta f}{q_{\\text{max}}^2} \\propto \\frac{2 W}{(2W)^2} = \\frac{1}{2}$$\n\nIn decibels:\n$$\\Delta \\mathcal{L}(\\Delta\\omega) = 10 \\log_{10}\\left(\\frac{1}{2}\\right) \\approx -3\\text{ dB}$$\n\nAlternatively, using the **jitter approach**:\nThe timing jitter variance per stage is $\\sigma_t^2 \\approx \\frac{kT C_L}{I^2}$. Scaling $C_L \\to 2C_L$ and $I \\to 2I$ yields:\n$$\\sigma_t^2 \\propto \\frac{2C_L}{(2I)^2} = \\frac{1}{2}\\left(\\frac{C_L}{I^2}\\right)$$\nSince phase noise is directly proportional to jitter variance $\\sigma_t^2$, it is halved.\n\n---\n\n### 3. Intuitive Perspective: Parallel Oscillators\n\nDoubling the width of every transistor is electrically identical to placing **two identical 3-stage ring oscillators in parallel** and tying their corresponding nodes together:\n* The signal voltages at each node are identical, so the voltage swing does not change.\n* The noise currents generated by the two oscillators are uncorrelated, so their noise powers add: total noise current power doubles ($\\times 2$).\n* However, each node now drives twice the capacitance ($\\times 2$), reducing the voltage perturbation variance by a factor of $(2)^2 = 4$.\n* The net phase variance drops by $\\frac{2}{4} = \\frac{1}{2}$, improving the phase noise by **$3\\text{ dB}$**.\n\n---\n\n### Conclusion\n* **Phase Noise:** Improves (drops) by **$3\\text{ dB}$** (halved in linear power).\n* **Trade-off:** The power consumption doubles ($+3\\text{ dB}$), leaving the oscillator's Figure of Merit (FoM) unchanged.",
        "format": "markdown",
        "sha256": "955ed1128f73db755027973164f7cec676f4590704f6994ddb56c247838464da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that phase noise falls by about 3 dB and supports it with the correct scaling: device noise power doubles while signal charge squared quadruples.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 4365,
        "total_tokens": 5482,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3310,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 4365,
        "total_tokens": 5482,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3310,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the widths of all NMOS and PMOS devices in the inverter-based ring oscillator are doubled ($W \\to 2W$), the **phase noise decreases by a factor of 2 (improves by $3\\text{ dB}$)**, assuming device capacitances dominate. \n\nAt the same time, the **power consumption doubles**, and the **oscillation frequency remains approximately unchanged**.\n\n---\n\n### Derivation & Explanations\n\n#### Method 1: The \"Parallel Oscillators\" Thought Experiment (Razavi's Approach)\n1. **Combine two identical oscillators:**  \n   Imagine two identical ring oscillators running in phase. Since they are identical, corresponding nodes in both circuits have identical voltages at every instant.\n2. **Tie corresponding nodes together:**  \n   Connecting the corresponding nodes causes no current to flow between them because they are at the same potential. Tying them in parallel is physically equivalent to doubling the width ($2W$) of every transistor. \n   - The oscillation frequency $\\omega_0$ and the voltage swing $V_{\\text{swing}}$ remain unchanged.\n   - The power dissipation doubles ($\\times 2$).\n3. **Analyze the noise:**  \n   - Transistor noise in the two original oscillators is uncorrelated. Therefore, the noise current power at each node doubles:\n     $$\\overline{i_{n,\\text{tot}}^2} = 2\\,\\overline{i_n^2}$$\n   - The node capacitance and small-signal admittance also double:\n     $$Y_{\\text{tot}} = 2Y$$\n   - The resulting noise voltage power spectral density at each node is:\n     $$\\overline{v_{n,\\text{tot}}^2} = \\frac{\\overline{i_{n,\\text{tot}}^2}}{|Y_{\\text{tot}}|^2} = \\frac{2\\,\\overline{i_n^2}}{4|Y|^2} = \\frac{1}{2}\\overline{v_n^2}$$\n   - Because phase noise $\\mathcal{L}\\{\\Delta\\omega\\}$ is directly proportional to the relative noise power, it is halved:\n     $$10 \\log_{10}\\left(\\frac{1}{2}\\right) \\approx -3\\text{ dB}$$\n\n---\n\n#### Method 2: Analytical Scaling (Hajimiri's Phase Noise Model)\n1. **Frequency & Delay:**  \n   The load capacitance $C_L$ of each stage is dominated by the gate and junction capacitances of the transistors, so $C_L \\propto W$. The drive current also scales proportionally with width, $I_D \\propto W$.  \n   The stage delay is:\n   $$t_d \\approx \\frac{C_L V_{DD}}{I_D} \\propto \\frac{W}{W} = \\text{constant}$$\n   Thus, the oscillation frequency $f_0 = \\frac{1}{2N t_d}$ remains constant.\n\n2. **Noise Current:**  \n   The thermal noise current power spectral density of a MOSFET is proportional to its transconductance $g_m$:\n   $$\\frac{\\overline{i_n^2}}{\\Delta f} = 4kT\\gamma g_m \\propto W$$\n   Doubling $W$ doubles the noise current power ($\\times 2$).\n\n3. **Maximum Charge Swing ($q_{\\max}$):**  \n   The maximum charge swing across the node capacitance is:\n   $$q_{\\max} = C_L V_{\\text{swing}} \\propto W \\implies q_{\\max}^2 \\propto W^2$$\n   Doubling $W$ quadruples $q_{\\max}^2$ ($\\times 4$).\n\n4. **Phase Noise Scaling:**  \n   According to Hajimiri's phase noise equation:\n   $$\\mathcal{L}\\{\\Delta\\omega\\} \\propto \\frac{\\overline{i_n^2}/\\Delta f}{q_{\\max}^2} \\propto \\frac{W}{W^2} = \\frac{1}{W}$$\n   Doubling the width ($W \\to 2W$) halves the phase noise, resulting in a **$3\\text{ dB}$ reduction**.\n\n---\n\n### Summary\n* **Phase Noise:** Decreases by **$3\\text{ dB}$** (halved).\n* **Power Dissipation:** Increases by **$3\\text{ dB}$** (doubled).\n* **Oscillator Figure of Merit (FoM):** Remains **constant**, reflecting the fundamental trade-off between power consumption and phase noise.",
        "format": "markdown",
        "sha256": "5abdf5a2c63d1157cb8cfb2f8c968fa89020d4ed514a1c7e7bdeb29146c5a320"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states a 3 dB phase-noise reduction and supports it with valid parallel-ring and width-scaling arguments. The frequency and power trends are also correct under device-capacitance-dominated loading.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 6027,
        "total_tokens": 7144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 6027,
        "total_tokens": 7144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the widths of both the NMOS and PMOS devices in the CMOS ring oscillator are doubled:\n\n### **Direct Answer:**\nThe **phase noise decreases by a factor of $2$** (it improves by **$3\\text{ dB}$**), at the cost of doubling the power consumption.\n\n---\n\n### **Detailed Explanation:**\n\n#### 1. **Oscillation Frequency Remains Unchanged**\n* **Capacitance:** Doubling the transistor widths ($W \\to 2W$) doubles both the gate capacitance and diffusion capacitance at each node ($C_L \\to 2C_L$).\n* **Current:** The charging and discharging currents also double ($I_D \\propto W \\to 2I_D$).\n* **Stage Delay:** The delay of each inverter is approximately:\n  $$t_d \\approx \\frac{C_L V_{DD}}{I_D} \\propto \\frac{2W}{2W} = \\text{constant}$$\n* Since the delay per stage does not change, the oscillation frequency $\\omega_0 = \\frac{1}{2N t_d}$ remains **virtually unchanged**.\n\n---\n\n#### 2. **Phase Noise Analysis**\n\nThere are three intuitive ways to understand why phase noise improves by $3\\text{ dB}$:\n\n##### **Perspective A: Parallel Oscillators Concept**\nDoubling the widths of all transistors is electrically equivalent to placing **two identical ring oscillators in parallel** by tying their corresponding nodes together:\n* The signal voltage swings remain unchanged.\n* The uncorrelated thermal noise current powers from the two circuits add together:\n  $$\\overline{i_{n,\\text{total}}^2} = 2\\,\\overline{i_{n}^2}$$\n* However, the admittance at each node is also doubled, meaning the impedance seen at each node is halved ($Z \\to Z/2$):\n  $$\\overline{v_{n,\\text{total}}^2} = \\overline{i_{n,\\text{total}}^2} \\cdot |Z|^2 = (2\\,\\overline{i_n^2}) \\left(\\frac{Z}{2}\\right)^2 = \\frac{1}{2}\\left(\\overline{i_n^2} |Z|^2\\right) = \\frac{1}{2}\\,\\overline{v_n^2}$$\n* Because the noise voltage power spectral density is halved while the signal amplitude is constant, the phase noise drops by a factor of $2$ (or **$3\\text{ dB}$**).\n\n---\n\n##### **Perspective B: Time-Variant Phase Noise Model (Hajimiri Model)**\nPhase noise in an oscillator is given by:\n$$\\mathcal{L}(\\Delta\\omega) = \\frac{\\Gamma_{\\text{rms}}^2}{2\\, q_{\\text{max}}^2\\, \\Delta\\omega^2} \\frac{\\overline{i_n^2}}{\\Delta f}$$\n\n* The maximum charge swing across the node capacitance is $q_{\\text{max}} = C_L V_{\\text{swing}} \\propto W$, so:\n  $$q_{\\text{max}}^2 \\propto W^2$$\n* The device noise current spectral density is $\\frac{\\overline{i_n^2}}{\\Delta f} = 4kT\\gamma g_m \\propto W$.\n* Therefore:\n  $$\\mathcal{L}(\\Delta\\omega) \\propto \\frac{W}{W^2} = \\frac{1}{W}$$\n\nDoubling the width ($W \\to 2W$) halves the phase noise power:\n$$10 \\log_{10}\\left(\\frac{1}{2}\\right) \\approx -3\\text{ dB}$$\n\n---\n\n##### **Perspective C: Time-Domain Jitter**\n* The voltage noise variance at each node is proportional to $\\frac{kT}{C_L} \\propto \\frac{1}{W}$.\n* The slew rate during transition is $\\frac{dV}{dt} \\approx \\frac{I_D}{C_L} \\propto \\frac{W}{W} = \\text{constant}$.\n* The timing jitter variance is:\n  $$\\sigma_t^2 = \\frac{\\sigma_v^2}{(dV/dt)^2} \\propto \\frac{1}{W}$$\nSince phase noise is directly proportional to jitter variance $\\sigma_t^2$, doubling $W$ reduces jitter variance by half, corresponding to a **$3\\text{ dB}$ improvement in phase noise**.\n\n---\n\n### **Summary**\n* **Oscillation Frequency:** Unchanged\n* **Power Consumption:** Doubles ($+3\\text{ dB}$)\n* **Phase Noise:** Halved (**$-3\\text{ dB}$**)",
        "format": "markdown",
        "sha256": "43380279d940c6966f27b71181f8030db23c06d1e26662de2617d3980efbe865"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and doubling power; its scaling and parallel-device explanations are consistent with the golden solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3799,
        "total_tokens": 4916,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2791,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 3799,
        "total_tokens": 4916,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2791,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ looking into the supply node of the ring oscillator, we analyze the circuit using the small-signal equivalent model of CMOS inverters at their DC operating point.\n\n---\n\n### 1. DC Operating Point and Symmetry\n\nA ring oscillator with an odd number of stages ($N = 3$) has a unique symmetric DC operating point where the feedback loop settles such that all node voltages are equal to the inverter trip point (threshold voltage) $V_M$:\n$$V_1 = V_2 = V_3 = V_M \\quad (\\text{where } V_{in} = V_{out})$$\n\nWhen a small-signal test voltage $v_x$ is applied to the common supply node, by circular symmetry of the three identical stages, all intermediate nodes experience the exact same small-signal voltage variation:\n$$v_1 = v_2 = v_3 = v_o$$\n\n---\n\n### 2. Intuitive Equivalent Circuit\n\nSince for each inverter the input voltage is equal to its output voltage ($v_{in} = v_{out} = v_o$):\n1. **NMOS transistor ($M_N$):** \n   - Gate and drain are both at potential $v_o$, and the source is at ground.\n   - This makes $M_N$ effectively **diode-connected** to ground.\n   - Its small-signal impedance is:\n     $$R_N = \\frac{1}{g_{mN}} \\parallel r_{oN} = \\frac{1}{g_{mN} + r_{oN}^{-1}}$$\n\n2. **PMOS transistor ($M_P$):** \n   - Gate and drain are both at potential $v_o$, and the source is connected to the supply node $v_x$.\n   - This makes $M_P$ effectively **diode-connected** between $v_x$ and node $v_o$.\n   - Its small-signal impedance is:\n     $$R_P = \\frac{1}{g_{mP}} \\parallel r_{oP} = \\frac{1}{g_{mP} + r_{oP}^{-1}}$$\n\nBecause the gate of a MOSFET draws zero current at low frequencies, the current flowing from the supply through $M_P$ must entirely flow through $M_N$ to ground. \n\nThus, for each inverter stage, the diode-connected PMOS and NMOS appear in **series** between the supply node and ground:\n$$R_{\\text{stage}} = R_P + R_N = \\left(\\frac{1}{g_{mP}} \\parallel r_{oP}\\right) + \\left(\\frac{1}{g_{mN}} \\parallel r_{oN}\\right)$$\n\n---\n\n### 3. Rigorous Small-Signal Derivation (KCL)\n\nLet us verify this by writing the small-signal current equations:\n\n- For each stage, the small-signal current supplied by $v_x$ through the PMOS transistor is:\n  $$i_{x1} = g_{mP}(v_x - v_{in}) + \\frac{v_x - v_{out}}{r_{oP}}$$\n- The current through the NMOS transistor is:\n  $$i_{d,N} = g_{mN} v_{in} + \\frac{v_{out}}{r_{oN}}$$\n\nApplying KCL at the output node ($i_{x1} = i_{d,N}$) with $v_{in} = v_{out} = v_o$:\n$$\\left(g_{mP} + \\frac{1}{r_{oP}}\\right)(v_x - v_o) = \\left(g_{mN} + \\frac{1}{r_{oN}}\\right)v_o$$\n\nSolving for $v_o$:\n$$v_o = \\frac{g_{mP} + r_{oP}^{-1}}{\\left(g_{mP} + r_{oP}^{-1}\\right) + \\left(g_{mN} + r_{oN}^{-1}\\right)} v_x$$\n\nThe current drawn by one stage from the supply is:\n$$i_{x1} = \\left(g_{mP} + r_{oP}^{-1}\\right)(v_x - v_o) = \\frac{\\left(g_{mP} + r_{oP}^{-1}\\right)\\left(g_{mN} + r_{oN}^{-1}\\right)}{\\left(g_{mP} + r_{oP}^{-1}\\right) + \\left(g_{mN} + r_{oN}^{-1}\\right)} v_x$$\n\nThe resistance of a single stage is:\n$$R_{\\text{stage}} = \\frac{v_x}{i_{x1}} = \\frac{1}{g_{mP} + r_{oP}^{-1}} + \\frac{1}{g_{mN} + r_{oN}^{-1}} = \\left(\\frac{1}{g_{mP}} \\parallel r_{oP}\\right) + \\left(\\frac{1}{g_{mN}} \\parallel r_{oN}\\right)$$\n\n---\n\n### 4. Total Resistance $R_X$\n\nAll three inverter stages are connected in parallel to the supply node:\n$$I_X = 3 \\cdot i_{x1}$$\n\nTherefore, the total small-signal resistance is:\n$$R_X = \\frac{R_{\\text{stage}}}{3} = \\frac{1}{3} \\left[ \\left(\\frac{1}{g_{mP}} \\parallel r_{oP}\\right) + \\left(\\frac{1}{g_{mN}} \\parallel r_{oN}\\right) \\right]$$\n\n#### Special Case: Neglecting Channel-Length Modulation ($\\lambda \\to 0$, $r_o \\to \\infty$):\n$$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mP}} + \\frac{1}{g_{mN}} \\right)$$\n\n*(Note: For an $N$-stage ring oscillator, the factor $\\frac{1}{3}$ generalizes to $\\frac{1}{N}$.)*",
        "format": "markdown",
        "sha256": "ccfb17c7c3deeed20b99d5c868e76dbd81c0f894039a3ef54da8024f88e1c2d5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer analyzes only the static symmetric operating point and derives a gm-based resistance, ignoring the dominant oscillation-driven charging and discharging of the node capacitances. The golden solution explicitly assigns this internally consistent static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1113,
        "output_tokens": 12434,
        "total_tokens": 13547,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11062,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1113,
        "output_tokens": 12434,
        "total_tokens": 13547,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11062,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ looking into the supply node of the 3-stage CMOS ring oscillator, we analyze the circuit around its symmetric operating point.\n\n---\n\n### 1. Transistor-Level Representation\nEach of the three inverter stages consists of:\n* An **NMOS** transistor ($M_n$): gate connected to the input, source connected to ground, drain connected to the output.\n* A **PMOS** transistor ($M_p$): gate connected to the input, source and body (n-well) connected to the supply node, drain connected to the output.\n\nLet the output nodes of the three stages be denoted as $v_1, v_2,$ and $v_3$:\n* Stage 1: input $v_3$, output $v_1$\n* Stage 2: input $v_1$, output $v_2$\n* Stage 3: input $v_2$, output $v_3$\n\n---\n\n### 2. Circuit Symmetry\nWe apply a small-signal test voltage $v_x$ at the supply node. \n\nBecause the three stages are identical and the ring possesses complete three-fold rotational symmetry, the common-mode excitation $v_x$ affects all three stages equally. \n\nWriting the small-signal KCL at each node:\n$$\\begin{aligned}\nv_1 &= -A_v v_3 + A_x v_x \\\\\nv_2 &= -A_v v_1 + A_x v_x \\\\\nv_3 &= -A_v v_2 + A_x v_x\n\\end{aligned}$$\n\nSumming these equations yields:\n$$(1 + A_v)(v_1 + v_2 + v_3) = 3 A_x v_x$$\n\nDue to symmetry, the response at each internal node must be identical:\n$$v_1 = v_2 = v_3 = v_o = \\frac{A_x}{1 + A_v}v_x$$\n\n---\n\n### 3. Equivalent Resistance of a Single Inverter Stage\nSince $v_{in} = v_{out} = v_o$ for each inverter:\n\n1. **For the NMOS transistor ($M_n$):**\n   * Gate voltage: $v_{g,n} = v_o$\n   * Drain voltage: $v_{d,n} = v_o$\n   * Source voltage: $v_{s,n} = 0$\n   * Since $v_{g,n} = v_{d,n}$, the NMOS behaves as a **diode-connected device** to ground. \n   * Its small-signal impedance is:\n     $$R_n = \\frac{1}{g_{mn}} \\parallel r_{on}$$\n\n2. **For the PMOS transistor ($M_p$):**\n   * Gate voltage: $v_{g,p} = v_o$\n   * Drain voltage: $v_{d,p} = v_o$\n   * Source voltage: $v_{s,p} = v_x$\n   * Body voltage: $v_{b,p} = v_x \\implies v_{bs,p} = 0$ (no body effect)\n   * Since $v_{g,p} = v_{d,p}$, the PMOS also behaves as a **diode-connected device** connected between node $v_x$ and node $v_o$.\n   * Its small-signal impedance is:\n     $$R_p = \\frac{1}{g_{mp}} \\parallel r_{op}$$\n\n3. **Series Connection:**\n   * At low frequencies, the gate of the next stage draws zero current ($i_{gate} = 0$).\n   * Therefore, all the small-signal current exiting the PMOS drain flows directly into the NMOS drain.\n   * The total small-signal resistance of a single inverter stage seen from the supply node is the series combination of $R_p$ and $R_n$:\n     $$R_{\\text{stage}} = R_p + R_n = \\left(\\frac{1}{g_{mp}} \\parallel r_{op}\\right) + \\left(\\frac{1}{g_{mn}} \\parallel r_{on}\\right)$$\n\n---\n\n### 4. Total Resistance $R_X$\nAll three identical stages are connected in parallel to the supply node:\n$$R_X = \\frac{R_{\\text{stage}}}{3} = \\frac{1}{3} \\left[ \\left(\\frac{1}{g_{mp}} \\parallel r_{op}\\right) + \\left(\\frac{1}{g_{mn}} \\parallel r_{on}\\right) \\right]$$\n\nIf channel-length modulation is neglected ($\\lambda = 0 \\implies r_{on}, r_{op} \\to \\infty$):\n$$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)$$\n\n*(Note: For a general $N$-stage ring oscillator, the resistance is $R_X = \\frac{1}{N} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)$).*",
        "format": "markdown",
        "sha256": "113608f6c6f4f6c6598b13ca19962ce39382eed594e3e3588186a042c56a637c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer analyzes a static symmetric operating point and derives a gm-based resistance, but misses the dominant oscillation-driven charging and discharging of the node capacitances. The golden solution specifically assigns this static-only approach a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1113,
        "output_tokens": 11723,
        "total_tokens": 12836,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1113,
        "output_tokens": 11723,
        "total_tokens": 12836,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ seen looking into the supply node, we perform a small-signal analysis around the symmetric operating point.\n\n---\n\n### 1. Assumptions & Operating Point\n\n* Each of the three stages is a standard CMOS inverter consisting of an NMOS transistor ($M_n$) and a PMOS transistor ($M_p$).\n* The NMOS source and bulk are tied to ground ($V_{BS,n} = 0 \\implies g_{mbn} = 0$).\n* The PMOS source and n-well bulk are connected to the supply node ($V_{BS,p} = 0 \\implies g_{mbp} = 0$).\n* At the symmetric DC equilibrium point, all stages have identical bias voltages:\n  $$V_{in,1} = V_{in,2} = V_{in,3} = V_{out,1} = V_{out,2} = V_{out,3} = V_M$$\n  where $V_M$ is the inverter threshold voltage. At this operating point, both transistors in each inverter are in saturation.\n\n---\n\n### 2. Symmetry and Node Voltages\n\nLet a small-signal test voltage $v_x$ be applied to the supply node, and let the small-signal voltages at the outputs of the three inverters be $v_1, v_2,$ and $v_3$.\n\nBecause the ring oscillator is topologically symmetric with respect to cyclic permutations ($1 \\to 2 \\to 3 \\to 1$), and the perturbation $v_x$ is applied identically to all three stages:\n$$v_1 = v_2 = v_3 = v_o$$\n\nSince the output of each inverter drives the input of the next stage ($v_{in,1} = v_3$, $v_{in,2} = v_1$, $v_{in,3} = v_2$), it follows that for every inverter:\n$$v_{in} = v_{out} = v_o$$\n\n---\n\n### 3. Equivalent Resistance of a Single Inverter Branch\n\nBecause $v_{in} = v_{out} = v_o$, the gate of each transistor is at the same small-signal potential as its drain. Consequently, both transistors behave as **diode-connected** devices:\n\n1. **NMOS Transistor ($M_n$):**\n   * Source is at ground ($0$).\n   * Gate and drain are at $v_o$.\n   * Small-signal impedance from node $v_o$ to ground:\n     $$R_n = \\frac{1}{g_{mn}} \\parallel r_{on} = \\frac{1}{g_{mn} + \\frac{1}{r_{on}}}$$\n\n2. **PMOS Transistor ($M_p$):**\n   * Source is at the supply node ($v_x$).\n   * Gate and drain are at $v_o$.\n   * Small-signal current entering the PMOS source:\n     $$i_s = g_{mp}(v_s - v_g) + \\frac{v_s - v_d}{r_{op}} = \\left(g_{mp} + \\frac{1}{r_{op}}\\right)(v_x - v_o)$$\n   * Small-signal impedance between the supply node and node $v_o$:\n     $$R_p = \\frac{v_x - v_o}{i_s} = \\frac{1}{g_{mp}} \\parallel r_{op} = \\frac{1}{g_{mp} + \\frac{1}{r_{op}}}$$\n\n3. **Series Combination:**\n   At low frequencies (DC small-signal), the gate oxide draws no current ($i_G = 0$). Thus, all current entering the PMOS source flows through the NMOS to ground. The two diode-connected transistors are in series:\n   $$R_{\\text{branch}} = R_p + R_n = \\left(\\frac{1}{g_{mp}} \\parallel r_{op}\\right) + \\left(\\frac{1}{g_{mn}} \\parallel r_{on}\\right)$$\n\n---\n\n### 4. Total Resistance Seen from the Supply Node ($R_X$)\n\nThe common supply node feeds all three identical inverters in parallel. Therefore, the total small-signal resistance $R_X$ is:\n\n$$R_X = \\frac{R_{\\text{branch}}}{3} = \\frac{1}{3} \\left[ \\left(\\frac{1}{g_{mp}} \\parallel r_{op}\\right) + \\left(\\frac{1}{g_{mn}} \\parallel r_{on}\\right) \\right]$$\n\nEquivalently, written with conductances:\n$$R_X = \\frac{1}{3} \\left[ \\frac{1}{g_{mp} + \\frac{1}{r_{op}}} + \\frac{1}{g_{mn} + \\frac{1}{r_{on}}} \\right]$$\n\nIf channel-length modulation is neglected ($r_{on}, r_{op} \\to \\infty$):\n$$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{mp}} + \\frac{1}{g_{mn}} \\right)$$",
        "format": "markdown",
        "sha256": "f29057f623985abdd0ef05898d8b499617912e6eaeb5f18af3771767656fab75"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer analyzes a static symmetric operating point and derives a gm-based resistance, ignoring the oscillator-driven charging and discharging of the load capacitances that dominate the supply-node resistance. This matches the golden solution’s specified score of 1 for a consistent static gm-based analysis.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1113,
        "output_tokens": 14656,
        "total_tokens": 15769,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13497,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1113,
        "output_tokens": 14656,
        "total_tokens": 15769,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13497,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes completely.**\n\n---\n\n### 1. Origin of the Stated Formula\nThe expression \n$$R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$$ \nis derived under the assumption that the ring oscillator is frozen at its **static DC operating point** (equilibrium point):\n\n* At this bias point, by symmetry, all node voltages are identical: $V_1 = V_2 = V_3 \\approx V_{DD}/2$.\n* All NMOS and PMOS transistors are biased in the **saturation region**.\n* A small perturbation applied to the supply node affects all three identical stages equally, meaning small-signal node variations are equal: $v_{in} = v_{out}$.\n* Because the gate and drain of each device experience the same small-signal voltage, each device behaves as a **diode-connected load**. \n* Looking into the PMOS source with its drain connected to the NMOS drain yields a small-signal resistance of $\\frac{1}{g_{mp}} + \\frac{1}{g_{mn}}$ per inverter. With three stages in parallel, the total resistance is $\\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$.\n\n---\n\n### 2. Why the Answer Changes When the Circuit Oscillates\n\nIf the circuit oscillates, this calculation is no longer valid for several fundamental reasons:\n\n1. **Unstable Equilibrium:**\n   * The DC bias point ($V_{in} = V_{out} = V_{DD}/2$) is an **unstable equilibrium**. Because the loop gain at the oscillation frequency satisfies Barkhausen’s criterion, the circuit naturally diverges from this operating point and enters a sustained oscillatory state.\n\n2. **Large-Signal Switching (Transistors Leave Saturation):**\n   * During oscillation, the nodes swing with large amplitude (typically rail-to-rail between $0$ and $V_{DD}$).\n   * The transistors do **not** remain in saturation. For most of each period:\n     * When an inverter's input is near $V_{DD}$, its NMOS is in deep triode while its PMOS is **cut off**.\n     * When the input is near $0$, its PMOS is in deep triode while its NMOS is **cut off**.\n   * Both transistors are simultaneously on (in saturation) only during the brief switching transitions. Consequently, constant values of $g_{mn}$ and $g_{mp}$ do not exist over the cycle.\n\n3. **Loss of In-Phase Symmetry:**\n   * During oscillation, the node voltages are **$120^\\circ$ out of phase** with each other. \n   * The condition $v_{in} = v_{out}$ across each inverter no longer holds, so the inverters do not behave as diode-connected devices.\n\n4. **Time-Varying and Dynamic Impedance:**\n   * Looking into the supply node, the impedance becomes **periodically time-varying**.\n   * If evaluated as an effective/average resistance $R_{X,\\text{avg}} = V_{DD} / I_{\\text{avg}}$, the current drawn from the supply is dominated by charging/discharging the load capacitance ($I_{\\text{avg}} \\approx f_0 C_{\\text{tot}} V_{DD}$) and short-circuit (crowbar) current during transitions, which is completely different from the static small-signal value.",
        "format": "markdown",
        "sha256": "a266e3a144fd965bdb03cfe699346b8721b49a122c976c30fea4fc4cee2f355c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer recognizes that oscillating supply current is largely due to charging and discharging the node capacitances and gives an equivalent average-current estimate. However, it does not relate the oscillation frequency to the stage delay or show that the resulting resistance remains on the order of the MOS on-resistance; its claim that the answer changes completely is misleading.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2396,
        "output_tokens": 12322,
        "total_tokens": 14718,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10802,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1198,
        "output_tokens": 6161,
        "total_tokens": 7359,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5401,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, this answer changes significantly.** \n\nHere is a detailed explanation of why:\n\n---\n\n### 1. Origin of the Initial Formula (Metastable Equilibrium Point)\nThe expression:\n$$R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$$\nis derived under the assumption that the circuit is **not oscillating**, but rather held at its static, metastable DC operating point:\n- At this equilibrium point, by symmetry, all node voltages are equal to the inverter threshold voltage ($V_{in} = V_{out} \\approx V_{DD}/2$).\n- Both the NMOS and PMOS transistors in all three inverters are simultaneously in the **saturation region**.\n- A small-signal variation on the supply node perturbs all stages identically ($v_{in} = v_{out}$ for each stage), causing each inverter to act as a diode-connected PMOS in series with a diode-connected NMOS.\n- This gives an impedance per stage of $R_1 \\approx \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}$, and three stages in parallel yield $R_X = \\frac{1}{3} R_1$.\n\n---\n\n### 2. Why the Answer Changes When the Circuit Oscillates\n\nWhen the ring oscillator oscillates, the assumptions used above completely break down:\n\n1. **Large-Signal Rail-to-Rail Operation:**\n   - The circuit does not stay at the metastable bias point ($V_{DD}/2$). Instead, the internal nodes swing between the supply rails (near $0\\text{ V}$ and $V_{DD}$).\n\n2. **Transistors Are Cut Off for Most of the Period:**\n   - At almost any given point in time:\n     - When an inverter’s input is **HIGH** ($\\approx V_{DD}$), the NMOS is in deep triode, and the PMOS is **OFF** ($V_{GS,p} \\approx 0$). When the PMOS is off, that inverter draws zero static current from the supply.\n     - When an inverter’s input is **LOW** ($\\approx 0$), the PMOS is in deep triode, and the NMOS is **OFF** ($V_{GS,n} \\approx 0$).\n   - Both devices conduct simultaneously only during the very brief transitions between states (short-circuit current). Thus, the DC path of two saturated devices in series does not exist during normal oscillation.\n\n3. **Time-Varying Nature (LPTV System):**\n   - Because the operating point moves continuously across different regions (cutoff, saturation, triode), the small-signal parameters ($g_{mn}(t)$, $g_{mp}(t)$) are strongly time-dependent. A single, constant small-signal resistance $R_X$ based on DC saturation transconductances is no longer defined.\n\n4. **Dynamic Current Dominates the Supply Impedance:**\n   - Under oscillation, the current drawn from the supply is predominantly **dynamic switching current** required to charge and discharge load capacitances:\n     $$I_{avg} \\approx 3 \\cdot f_{osc} \\cdot C_L V_{DD} + I_{sc,avg}$$\n   - Any effective or incremental resistance seen looking into the supply ($\\Delta V_{DD} / \\Delta I_{avg}$) is governed by the oscillation frequency $f_{osc}(V_{DD})$, load capacitance $C_L$, and large-signal switching dynamics, which is entirely different (and generally much higher) than the small-signal value $\\frac{1}{3}(1/g_{mn} + 1/g_{mp})$.",
        "format": "markdown",
        "sha256": "1e687ae81e8c2d7b51918a78c1e39294e963363b7c32bf52c0aaf8dfc1f6c1e6"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that oscillating supply current is largely due to charging and discharging node capacitances, but concludes that the effective resistance is generally much higher because devices are off much of the cycle. The golden solution says it remains on the order of the MOS on-resistance, not much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2396,
        "output_tokens": 14668,
        "total_tokens": 17064,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13084,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1198,
        "output_tokens": 7334,
        "total_tokens": 8532,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes completely.**\n\nHere is the detailed explanation of why the original computation was made and why it no longer holds when the circuit oscillates:\n\n---\n\n### 1. Why the formula holds when the circuit does *not* oscillate (Metastable Equilibrium)\nThe formula $R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$ is derived under the assumption that the circuit sits at its static, DC operating point (the metastable equilibrium where $V_{in} = V_{out} = V_M$):\n1. **Symmetry:** By symmetry, all three inverter output voltages are equal: $V_1 = V_2 = V_3 = V_M$.\n2. **Diode Connection:** A small-signal perturbation $v_x$ applied to the supply affects all three identical stages equally, causing all three node voltages to shift identically ($v_1 = v_2 = v_3$). Since each inverter's output is connected to the next inverter's input, this means for every inverter, the small-signal input equals the small-signal output:\n   $$v_{in} = v_{out}$$\n3. Because the gate and drain move together ($v_g = v_d$), both the NMOS and PMOS act as **diode-connected devices** operating in saturation:\n   - The NMOS provides an impedance to ground of $1/g_{mn}$.\n   - The PMOS provides an impedance to the supply of $1/g_{mp}$.\n4. These two impedances appear in series between $V_{DD}$ and ground for each inverter stage:\n   $$R_{inverter} \\approx \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}$$\n5. Since there are 3 identical inverters in parallel, the total resistance is:\n   $$R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$$\n\n---\n\n### 2. Why this changes when the circuit oscillates\nOnce the ring oscillator begins oscillating, all the assumptions behind the small-signal derivation fail:\n\n1. **Large-Signal Operation (Loss of Saturation):**\n   - The circuit does not stay at the metastable bias point; instead, it undergoes large-signal, rail-to-rail swings.\n   - For most of the oscillation period, each inverter has one transistor in the **triode (deep ON)** region and the other in **cutoff (OFF)**. \n   - When a transistor is in cutoff, the direct DC path between $V_{DD}$ and ground through that inverter is essentially broken. Devices only pass through saturation simultaneously for a very brief duration during transitions (short-circuit current).\n\n2. **Breakdown of Symmetry ($v_{in} \\neq v_{out}$):**\n   - The internal nodes are now oscillating with a relative phase shift of $120^\\circ$ ($2\\pi/3$). \n   - At no point in time are all node voltages equal and moving in phase. Thus, the condition $v_{in} = v_{out}$ does not hold, meaning the devices **do not behave as diode-connected transistors**.\n\n3. **Nature of the Supply Current:**\n   - In steady-state oscillation, the current drawn from the supply is predominantly **dynamic**, charging and discharging load capacitances:\n     $$I_{avg} \\approx 3 \\cdot C_L \\cdot V_{DD} \\cdot f_{osc} + I_{short-circuit}$$\n   - Since the oscillation frequency $f_{osc}$ itself is a function of $V_{DD}$, the effective resistance looking into the supply ($R_X \\approx \\Delta V_{DD} / \\Delta I_{avg}$) is governed by the frequency dependence and large-signal switching dynamics, rather than the small-signal transconductances $g_{mn}$ and $g_{mp}$.\n\n---\n\n### Conclusion\nBecause the devices are switching non-linearly between cutoff and triode rather than remaining in saturation, and because the symmetry condition $v_{in} = v_{out}$ is violated, **the small-signal resistance $R_X$ changes and cannot be represented by $\\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$.**",
        "format": "markdown",
        "sha256": "f9e47deb4bac27802b37d9189b20d159cf742406c32f33139e7f2dd2bb6a6873"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive charging as the source of the oscillating supply current, but it does not derive RX or show that the frequency and capacitance scaling leaves RX on the order of the MOS on-resistance. Saying the answer changes completely overstates the result.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2396,
        "output_tokens": 16126,
        "total_tokens": 18522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14222,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1198,
        "output_tokens": 8063,
        "total_tokens": 9261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7111,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the StrongARM latch comparator shown in the figure, as the width of the tail transistor $M_7$ increases, the **initial voltage gain decreases**.\n\n---\n\n### **Detailed Explanation**\n\n#### **1. What is the Initial Voltage Gain?**\nWhen the clock ($CK$) transitions from low to high:\n1. **Evaluation / Integration Phase:** $M_7$ turns on, and the input differential pair ($M_1, M_2$) begins discharging nodes $P$ and $Q$. As their voltages fall below $V_{DD} - V_{THN}$, transistors $M_3$ and $M_4$ turn on and begin discharging output nodes $X$ and $Y$.\n2. **Regeneration Phase:** When nodes $X$ and $Y$ fall to approximately $V_{DD} - |V_{THP}|$, the cross-coupled PMOS pair ($M_5, M_6$) turns on, initiating regenerative (positive feedback) latching.\n\nBefore regeneration takes over, the circuit acts as an integrator/amplifier that converts the input differential voltage $\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$ into an initial differential output voltage $\\Delta V_0 = V_X - V_Y$. \n\nThe **initial voltage gain** $A_v$ is defined as the gain established at the onset of regeneration:\n$$A_v = \\frac{\\Delta V_0}{\\Delta V_{\\text{in}}}$$\n\n---\n\n#### **2. Mathematical Derivation**\nDuring the integration phase:\n- The differential current produced by the input pair is:\n  $$\\Delta I = g_{m1,2} \\Delta V_{\\text{in}}$$\n- The common-mode current discharging each side is:\n  $$I_D \\approx \\frac{I_{\\text{tail}}}{2}$$\n- The time $\\Delta t$ required for nodes $X$ and $Y$ to drop by a voltage $\\Delta V_{\\text{drop}} \\approx |V_{THP}|$ (to trigger the PMOS latch) is:\n  $$\\Delta t \\approx \\frac{C \\cdot \\Delta V_{\\text{drop}}}{I_D} = \\frac{C \\cdot \\Delta V_{\\text{drop}}}{I_{\\text{tail}} / 2}$$\n  *(where $C$ is the parasitic capacitance at the nodes).*\n\nThe differential voltage accumulated over this time interval is:\n$$\\Delta V_0 \\approx \\frac{\\Delta I \\cdot \\Delta t}{C} = \\frac{g_{m1,2} \\Delta V_{\\text{in}}}{C} \\cdot \\left(\\frac{C \\cdot \\Delta V_{\\text{drop}}}{I_D}\\right) = \\left(\\frac{g_{m1,2}}{I_D}\\right) \\Delta V_{\\text{drop}} \\cdot \\Delta V_{\\text{in}}$$\n\nNotice that the node capacitance $C$ cancels out, yielding the initial voltage gain:\n$$A_v = \\frac{\\Delta V_0}{\\Delta V_{\\text{in}}} = \\left(\\frac{g_{m1,2}}{I_D}\\right) \\Delta V_{\\text{drop}} = \\frac{2 \\Delta V_{\\text{drop}}}{V_{GS1,2} - V_{TH1,2}}$$\n\n---\n\n#### **3. Effect of Increasing the Width of $M_7$ ($W_7$)**\n- As $W_7$ increases, the tail current $I_{\\text{tail}}$ increases (and the on-resistance of $M_7$ decreases, pulling the common-source node of $M_1-M_2$ closer to ground).\n- For MOS transistors operating in strong inversion:\n  - Transconductance scales as: $g_{m1,2} \\propto \\sqrt{I_{\\text{tail}}} \\propto \\sqrt{W_7}$\n  - Integration time scales as: $\\Delta t \\propto \\frac{1}{I_{\\text{tail}}} \\propto \\frac{1}{W_7}$\n- Consequently, the ratio $\\frac{g_{m1,2}}{I_D}$ (the transconductance efficiency) scales inversely with the square root of the tail current:\n  $$\\frac{g_{m1,2}}{I_D} \\propto \\frac{1}{\\sqrt{I_{\\text{tail}}}} \\propto \\frac{1}{\\sqrt{W_7}}$$\n- Equivalently, the overdrive voltage $(V_{GS1,2} - V_{TH1,2})$ increases, which directly lowers the gain:\n  $$A_v \\propto \\frac{1}{V_{GS1,2} - V_{TH1,2}}$$\n\n---\n\n### **Intuitive Summary**\nA wider $M_7$ discharges the internal nodes much faster. While a larger current slightly increases the transconductance $g_m$ (which grows only as $\\sqrt{I}$), the time window $\\Delta t$ available for the input pair to integrate the differential current onto the parasitic capacitors shrinks much faster (as $1/I$). \n\nAs a result, less differential voltage is integrated before the latch trips, meaning **the initial voltage gain decreases**. \n\n*(This introduces a classic design trade-off in StrongARM latches: increasing $W_7$ improves evaluation speed/delay, but degrades the initial gain, which worsens the input-referred offset and noise contributed by the latching transistors $M_3$–$M_6$.)*",
        "format": "markdown",
        "sha256": "1d641bc4f644e3be04970eee0eafa530637cb3f07e41e443cd0c772d37f83adf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The trend and main mechanism are correct: a wider M7 raises tail current while gm grows only about as the square root of current, reducing gm/Itail and the initial gain. However, the answer identifies the initial-gain voltage as X−Y and bases its detailed timing derivation on that event, whereas the golden solution defines the gain across P and Q before regeneration; that makes the circuit-level explanation partly unreliable.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1090,
        "output_tokens": 17694,
        "total_tokens": 18784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1090,
        "output_tokens": 17694,
        "total_tokens": 18784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the StrongARM latch circuit shown, **the initial voltage gain decreases as the width of $M_7$ increases**.\n\n---\n\n### **Detailed Analysis and Derivation**\n\n#### **1. Mechanism of the Initial Amplification Phase**\n* **Reset Phase ($CK = 0$):** \n  Transistors $S_1 - S_4$ are on, precharging nodes $P, Q, X,$ and $Y$ to $V_{DD}$. Transistor $M_7$ is off.\n* **Amplification Phase ($CK \\to V_{DD}$):** \n  Transistors $S_1 - S_4$ turn off, and $M_7$ turns on. Nodes $P$ and $Q$ begin discharging through the input differential pair $M_1-M_2$ and tail transistor $M_7$. \n  \nBefore regeneration takes over (which occurs when cross-coupled PMOS transistors $M_5-M_6$ turn on, or as the cross-coupled NMOS devices enter strong positive feedback), the circuit operates as an **integrating pre-amplifier**.\n\n#### **2. Mathematical Formulation of the Initial Gain**\nDuring the pre-regeneration interval $\\Delta t$, the input pair converts the differential input voltage $\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$ into a differential current:\n$$\\Delta I = g_{m1,2} \\Delta V_{\\text{in}}$$\n\nThis differential current discharges the capacitance $C$ at the output nodes, developing an initial differential output voltage:\n$$\\Delta V_{\\text{out}} \\approx \\frac{\\Delta I \\cdot \\Delta t}{C} = \\frac{g_{m1,2} \\Delta t}{C} \\Delta V_{\\text{in}}$$\n\nHence, the initial voltage gain $A_v$ before regeneration begins is:\n$$A_v = \\frac{\\Delta V_{\\text{out}}}{\\Delta V_{\\text{in}}} \\approx \\frac{g_{m1,2} \\Delta t}{C}$$\n\n#### **3. Dependence on the Width of $M_7$ ($W_7$)**\n1. **Discharge Time ($\\Delta t$):**\n   The integration period ends when the common-mode voltage drops by a fixed threshold (e.g., by $|V_{THP}|$ to turn on $M_5$ and $M_6$). The discharge rate is set by the tail current $I_{SS}$:\n   $$\\Delta t \\approx \\frac{C \\cdot |V_{THP}|}{I_{SS}/2} \\propto \\frac{1}{I_{SS}}$$\n\n2. **Transconductance ($g_{m1,2}$):**\n   In strong inversion, the transconductance of the input pair scales with the square root of the bias current:\n   $$g_{m1,2} = \\sqrt{2\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 \\frac{I_{SS}}{2}} \\propto \\sqrt{I_{SS}}$$\n\n3. **Combined Voltage Gain:**\n   Substituting $g_{m1,2}$ and $\\Delta t$ into the gain expression:\n   $$A_v \\propto \\sqrt{I_{SS}} \\cdot \\frac{1}{I_{SS}} = \\frac{1}{\\sqrt{I_{SS}}}$$\n\n   Equivalently, using $g_{m1,2} / I_{D1} = 2 / (V_{GS1} - V_{TH1})$:\n   $$A_v \\approx \\frac{2 |V_{THP}|}{V_{GS1} - V_{TH1}}$$\n\nAs the width $W_7$ increases:\n* The current capability of $M_7$ increases ($I_{SS}$ increases).\n* The overdrive voltage $(V_{GS1} - V_{TH1})$ of the input pair increases.\n* Consequently, the initial voltage gain **$A_v$ decreases**.\n\n---\n\n### **Physical Intuition**\nAlthough widening $M_7$ increases the transconductance $g_{m1,2}$ of the input transistors, it accelerates the node discharge much faster:\n* **$g_m$ only grows as $\\sqrt{W_7}$** (or $\\sqrt{I_{SS}}$).\n* **Integration time $\\Delta t$ shrinks as $1/W_7$** (or $1/I_{SS}$).\n\nBecause the integration time shortens faster than $g_m$ grows, less differential charge is integrated onto the nodes before regeneration begins, resulting in a **lower initial voltage gain** (a classic speed vs. gain/offset trade-off in StrongARM comparator design).",
        "format": "markdown",
        "sha256": "7b80613a4ca7783ace0c0842713425f7a3e495290d60a9138c75a84ee515f5ec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain decreases as M7 widens and explains that increased tail current shortens the integration interval faster than it increases input-pair transconductance, reducing the gain.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1090,
        "output_tokens": 17972,
        "total_tokens": 19062,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16941,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1090,
        "output_tokens": 17972,
        "total_tokens": 19062,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16941,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown (the classic **StrongARM latch / dynamic comparator**), the **initial voltage gain decreases** as the width of $M_7$ ($W_7$) increases.\n\n---\n\n### **Detailed Explanation and Derivation**\n\n#### **1. Phases of Operation**\n* **Reset / Precharge Phase ($CK = 0$):** \n  Transistors $S_1 - S_4$ are ON, precharging nodes $P, Q, X,$ and $Y$ to $V_{DD}$. The tail transistor $M_7$ is OFF, so no static current flows.\n  \n* **Amplification Phase ($CK \\rightarrow V_{DD}$):** \n  $S_1 - S_4$ turn OFF and $M_7$ turns ON. The input differential pair ($M_1, M_2$) begins discharging nodes $P$ and $Q$. Once $V_P$ and $V_Q$ fall below $V_{DD} - V_{THN}$, transistors $M_3$ and $M_4$ turn ON, and nodes $X$ and $Y$ start discharging from $V_{DD}$.\n\n* **Regeneration Phase:** \n  When either $V_X$ or $V_Y$ drops by a PMOS threshold voltage ($|V_{THP}|$) below $V_{DD}$, the cross-coupled PMOS pair ($M_5, M_6$) turns ON, initiating regenerative positive feedback that rapidly latches the outputs to complementary rail values ($V_{DD}$ and $0$).\n\n---\n\n#### **2. Derivation of the Initial Voltage Gain**\nThe **initial voltage gain** ($A_v$) is defined as the voltage gain developed from the differential input ($\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$) to the output nodes ($\\Delta V_{\\text{out}} = V_X - V_Y$) during the amplification phase, just before regeneration is triggered by $M_5$ and $M_6$.\n\nDuring this pre-regeneration window:\n1. The differential current produced by the input pair is:\n   $$\\Delta I = g_{m1,2} \\Delta V_{\\text{in}}$$\n\n2. This differential current discharges the capacitance $C_L$ at nodes $X$ and $Y$:\n   $$\\frac{d\\Delta V_{\\text{out}}}{dt} \\approx \\frac{\\Delta I}{C_L} = \\frac{g_{m1,2} \\Delta V_{\\text{in}}}{C_L}$$\n\n3. Meanwhile, the common-mode voltage at nodes $X$ and $Y$ discharges at a rate determined by the common-mode current $I_{D1} \\approx I_{SS}/2$:\n   $$\\frac{d V_{CM}}{dt} \\approx \\frac{I_{D1}}{C_L}$$\n\n4. Regeneration begins when the common-mode voltage drops by $|V_{THP}|$. The time duration of this amplification/integration phase is:\n   $$\\Delta t \\approx \\frac{C_L |V_{THP}|}{I_{D1}}$$\n\n5. The accumulated differential voltage at the start of regeneration is:\n   $$\\Delta V_{\\text{out}} = \\left(\\frac{d\\Delta V_{\\text{out}}}{dt}\\right) \\Delta t = \\left(\\frac{g_{m1,2} \\Delta V_{\\text{in}}}{C_L}\\right) \\left(\\frac{C_L |V_{THP}|}{I_{D1}}\\right) = \\frac{g_{m1,2}}{I_{D1}} |V_{THP}| \\Delta V_{\\text{in}}$$\n\nTherefore, the initial voltage gain is:\n$$A_v = \\frac{\\Delta V_{\\text{out}}}{\\Delta V_{\\text{in}}} = \\frac{g_{m1,2}}{I_{D1}} |V_{THP}|$$\n\nAssuming square-law behavior in strong inversion, where $\\frac{g_{m1,2}}{I_{D1}} = \\frac{2}{V_{GS1} - V_{TH1}}$:\n$$A_v = \\frac{2 |V_{THP}|}{V_{GS1} - V_{TH1}}$$\n\n---\n\n#### **3. Effect of Increasing the Width of $M_7$**\n* Increasing the width of $M_7$ ($W_7$) reduces its on-resistance and increases the tail current $I_{SS}$.\n* With a larger current, the source voltage of $M_1$ and $M_2$ drops closer to ground, increasing their gate-to-source overdrive voltage $(V_{GS1} - V_{TH1})$.\n* As the overdrive voltage increases, the transconductance efficiency $\\frac{g_m}{I_D} \\propto \\frac{1}{\\sqrt{I_{SS}}}$ **decreases**.\n* Intuitively, the circuit discharges the output nodes much faster, leaving **less time to integrate** the differential input current before the regenerative latch turns on.\n\nConsequently, as the width of $M_7$ increases:\n$$\\mathbf{A_v \\propto \\frac{1}{\\sqrt{W_7}} \\implies \\text{The initial voltage gain decreases.}}$$\n\n---\n\n### **Design Takeaway**\nThis represents a fundamental trade-off in StrongARM latch design:\n* **Increasing $W_7$:** Increases evaluation speed (shorter delay), but **decreases initial voltage gain**, which increases the input-referred offset caused by mismatches in $M_3 - M_6$.\n* **Decreasing $W_7$:** **Increases initial voltage gain** and reduces input-referred offset, but at the expense of lower evaluation speed (longer delay).",
        "format": "markdown",
        "sha256": "4245b360d053f69731bd5624d8b2e867c8df10ea557528353fe6062c666ef595"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the correct decreasing trend and the key explanation: wider M7 raises tail current while the relevant gm/ID falls. However, it derives gain at X/Y using a PMOS-threshold timing model, whereas the specified initial gain is the input-pair integration across P/Q, making the detailed derivation materially imprecise.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1090,
        "output_tokens": 20340,
        "total_tokens": 21430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1090,
        "output_tokens": 20340,
        "total_tokens": 21430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the capacitance at nodes **$P$** and **$Q$** ($C_P$ and $C_Q$) is increased, the **initial voltage gain increases**.\n\n---\n\n### Physical Mechanism and Explanation\n\nThe circuit shown is the classic **StrongArm latch** (dynamic comparator). Its operation during the evaluation phase explains why this happens:\n\n#### 1. Reset Phase ($CK = \\text{Low}$)\n* Transistors $S_1 - S_4$ are turned on, precharging nodes $P, Q, X,$ and $Y$ to $V_{DD}$.\n* The tail transistor $M_7$ is off.\n\n#### 2. Beginning of Evaluation Phase ($CK \\to \\text{High}$)\n* $S_1 - S_4$ turn off, and the tail transistor $M_7$ turns on, drawing current.\n* The input pair $M_1$ and $M_2$ turns on and conducts currents $I_1$ and $I_2$, where the differential current is:\n  $$\\Delta I = I_1 - I_2 = g_{m1,2} (V_{\\text{in1}} - V_{\\text{in2}})$$\n* Initially, nodes $X$ and $Y$ are at $V_{DD}$, and nodes $P$ and $Q$ are also at $V_{DD}$. Thus, $V_{GS3} = V_{GS4} = 0$, meaning **$M_3$ and $M_4$ are initially off**. \n* During this period, nodes $X$ and $Y$ remain floating at $V_{DD}$, while nodes $P$ and $Q$ discharge toward ground through $M_1$ and $M_2$.\n\n#### 3. Turn-On Delay Difference ($\\Delta t$)\n$M_3$ and $M_4$ only turn on once nodes $P$ and $Q$ drop below $V_{DD} - V_{THN}$:\n* Node $P$ reaches $V_{DD} - V_{THN}$ at:\n  $$t_1 \\approx \\frac{C_P V_{THN}}{I_1}$$\n* Node $Q$ reaches $V_{DD} - V_{THN}$ at:\n  $$t_2 \\approx \\frac{C_Q V_{THN}}{I_2}$$\n\nAssuming $I_1 > I_2$, $M_3$ turns on before $M_4$. The time difference between their turn-on moments is:\n$$\\Delta t = t_2 - t_1 = C_P V_{THN} \\left( \\frac{1}{I_2} - \\frac{1}{I_1} \\right) \\approx \\frac{C_P V_{THN}}{I_D^2} \\Delta I$$\n\nDuring this interval $\\Delta t$:\n* $M_3$ is **ON**, discharging node $X$.\n* $M_4$ is **STILL OFF**, so node $Y$ remains at $V_{DD}$.\n\nBecause $\\Delta t$ is directly proportional to $C_P$, a **larger $C_P$ prolongs this time window**, giving node $X$ more time to discharge exclusively before node $Y$ starts discharging.\n\n#### 4. Total Initial Voltage Gain\nOnce both $M_3$ and $M_4$ conduct, nodes $X$ and $Y$ continue discharging until one of them drops to $V_{DD} - |V_{THP}|$, at which point the cross-coupled PMOS pair ($M_5, M_6$) turns on and regenerative positive feedback takes over.\n\nThe initial differential voltage $\\Delta V_{XY}$ established right before regeneration is:\n$$\\Delta V_{XY} = \\frac{\\Delta I}{I_D} \\left( |V_{THP}| + \\frac{C_P}{C_{XY}} V_{THN} \\right)$$\n\nDividing by the input difference $\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$ yields the initial voltage gain:\n$$A_v = \\frac{g_{m1,2}}{I_D} \\left( |V_{THP}| + \\frac{C_P}{C_{XY}} V_{THN} \\right) = \\frac{2}{V_{GS1} - V_{TH1}} \\left( |V_{THP}| + \\frac{C_P}{C_{XY}} V_{THN} \\right)$$\n*(where $C_{XY}$ is the capacitance at output nodes $X$ and $Y$)*.\n\n---\n\n### Conclusion\n* **Result:** The initial voltage gain **increases** with higher capacitance at nodes $P$ and $Q$ (proportional to $C_P/C_{XY}$).\n* **Trade-off:** While increasing $C_P$ and $C_Q$ increases the pre-regeneration voltage gain (which helps reduce input-referred offset and noise), it also increases the discharge time of nodes $P$ and $Q$, thereby **slowing down the comparator**.",
        "format": "markdown",
        "sha256": "4df4ddfdf308491ae83f53a5a70b0f745d7ceecb9bfdb55ba0ec0aaffbff2cca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is wrong: increasing capacitance does not increase the initial gain. Although the answer correctly notes that capacitance slows node discharge, the longer amplification interval compensates for the reduced voltage slope, so the capacitance cancels from the initial-gain expression.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 15676,
        "total_tokens": 16765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 15676,
        "total_tokens": 16765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the StrongARM dynamic comparator shown in the figure, **increasing the capacitance at nodes $P$ and $Q$ ($C_P$ and $C_Q$) increases the initial voltage gain.**\n\n---\n\n### **Detailed Analysis and Derivation**\n\nThe operation from the reset state to the start of regeneration can be divided into two main phases after the clock ($CK$) goes high:\n\n#### **1. Reset Phase ($CK = 0$)**\n* The tail transistor $M_7$ is **OFF**.\n* Reset switches $S_1, S_2, S_3, S_4$ are **ON**, precharging nodes $P, Q, X,$ and $Y$ to $V_{DD}$.\n* Because $V_X = V_Y = V_P = V_Q = V_{DD}$, the gate-to-source voltages of $M_3$ and $M_4$ are zero ($V_{GS3} = V_{GS4} = 0$). Thus, **$M_3$ and $M_4$ are initially OFF**.\n\n---\n\n#### **2. Phase 1: Discharging Nodes $P$ and $Q$**\n* When $CK$ rises to $V_{DD}$, $M_7$ turns **ON** and switches $S_1 - S_4$ turn **OFF**.\n* The input transistors $M_1$ and $M_2$ draw currents proportional to the differential input:\n  $$I_1 = I_D + \\frac{\\Delta I}{2}, \\quad I_2 = I_D - \\frac{\\Delta I}{2}$$\n  where $\\Delta I = g_{m1,2} \\Delta V_{\\text{in}}$ and $\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$.\n* Since $M_3$ and $M_4$ are off, these currents must initially discharge the capacitances at nodes $P$ and $Q$ ($C_P$ and $C_Q$, where $C_P = C_Q$):\n  $$V_P(t) = V_{DD} - \\frac{I_1}{C_P} t$$\n  $$V_Q(t) = V_{DD} - \\frac{I_2}{C_P} t$$\n* Transistor $M_3$ turns on when $V_P$ drops by an NMOS threshold voltage $V_{THN}$ below $V_{DD}$:\n  $$t_P = \\frac{C_P V_{THN}}{I_1}$$\n  Similarly, $M_4$ turns on at:\n  $$t_Q = \\frac{C_P V_{THN}}{I_2}$$\n* Since $I_1 \\neq I_2$, there is a time skew $\\Delta t$ between when $M_3$ turns on and when $M_4$ turns on:\n  $$\\Delta t = t_Q - t_P = C_P V_{THN} \\left(\\frac{1}{I_2} - \\frac{1}{I_1}\\right) \\approx C_P V_{THN} \\frac{\\Delta I}{I_D^2}$$\n  **Crucially, this time delay difference $\\Delta t$ is directly proportional to $C_P$.**\n\n---\n\n#### **3. Phase 2: Discharging Nodes $X$ and $Y$**\n* Once $M_3$ and $M_4$ turn on, they draw current to discharge the output capacitances at nodes $X$ and $Y$ ($C_X = C_Y$):\n  $$V_{DD} - V_X(t) = \\frac{I_1}{C_X} (t - t_P) \\quad \\text{for } t > t_P$$\n  $$V_{DD} - V_Y(t) = \\frac{I_2}{C_X} (t - t_Q) \\quad \\text{for } t > t_Q$$\n* This amplification phase ends and regenerative latching begins when the PMOS cross-coupled pair ($M_5, M_6$) turns on—namely, when the lower output node (node $X$) drops by $|V_{THP}|$ below $V_{DD}$:\n  $$t_{\\text{end}} - t_P = \\frac{C_X |V_{THP}|}{I_1} \\implies t_{\\text{end}} = \\frac{C_P V_{THN} + C_X |V_{THP}|}{I_1}$$\n\n---\n\n#### **4. Output Differential Voltage and Initial Gain**\nAt $t_{\\text{end}}$, the differential output voltage $\\Delta V_{\\text{out}} = V_Y(t_{\\text{end}}) - V_X(t_{\\text{end}})$ developed across nodes $X$ and $Y$ is:\n$$\\Delta V_{\\text{out}} = |V_{THP}| - \\frac{I_2}{C_X}(t_{\\text{end}} - t_Q)$$\n\nSubstituting $t_{\\text{end}}$, $t_P$, and $t_Q$:\n$$\\Delta V_{\\text{out}} \\approx \\frac{\\Delta I}{I_D} \\left( |V_{THP}| + \\frac{C_P}{C_X} V_{THN} \\right) = \\frac{g_{m1,2} \\Delta V_{\\text{in}}}{I_D} \\left( |V_{THP}| + \\frac{C_P}{C_X} V_{THN} \\right)$$\n\nTherefore, the **initial voltage gain** $A_v$ is:\n$$A_v = \\frac{\\Delta V_{\\text{out}}}{\\Delta V_{\\text{in}}} = \\frac{g_{m1,2}}{I_D} \\left( |V_{THP}| + \\frac{C_P}{C_X} V_{THN} \\right)$$\n\n---\n\n### **Conclusion & Practical Trade-offs**\n\n* **Gain:** As seen from the formula, **increasing $C_P$ increases the initial voltage gain** linearly through the term $\\frac{C_P}{C_X} V_{THN}$. Physically, a larger $C_P$ widens the time gap $\\Delta t$ during which the faster-discharging side has turned on while the slower side is still off, integrating the input current difference over a longer duration before regeneration starts.\n* **Offset:** A higher initial gain is beneficial because it **attenuates the input-referred offset** contributed by the cross-coupled regenerative latch ($M_3 - M_6$).\n* **Trade-off (Speed & Power):** Increasing $C_P$ **increases the comparison delay** (since nodes $P$ and $Q$ take longer to discharge) and **increases dynamic power consumption** ($C_P V_{DD}^2 f_{CK}$) because more charge must be restored during the reset phase.",
        "format": "markdown",
        "sha256": "251a1e936c040c93ad5728729dd5171990fe05a67b1457baf0dc04f450356bc1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is wrong: the initial gain remains approximately unchanged as the increased discharge time is proportional to the capacitance, which cancels in the gain. The answer incorrectly treats the longer transient and node-to-node turn-on skew as an increase in initial gain, though it does recognize that larger capacitance slows the circuit.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 19135,
        "total_tokens": 20224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17591,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 19135,
        "total_tokens": 20224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17591,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit (a classic **StrongARM latch comparator**), increasing the capacitance at nodes $P$ and $Q$ causes the initial voltage gain to **decrease**.\n\n---\n\n### Detailed Explanation\n\n#### 1. Operation during the Amplification Phase\n1. **Reset Phase ($CK = 0$):**\n   Switches $S_1 - S_4$ turn ON, precharging nodes $P, Q, X,$ and $Y$ to $V_{DD}$. The tail transistor $M_7$ is OFF. Because $V_P = V_Q = V_X = V_Y = V_{DD}$, transistors $M_3$ and $M_4$ have $V_{GS3} = V_Y - V_P = 0$ and $V_{GS4} = V_X - V_Q = 0$, meaning they are completely **OFF**.\n\n2. **Amplification Phase ($CK \\to V_{DD}$):**\n   - $M_7$ turns ON and switches $S_1 - S_4$ turn OFF.\n   - The input pair $M_1 - M_2$ turns ON and draws currents $I_1$ and $I_2$, creating a differential current:\n     $$\\Delta I = I_1 - I_2 = g_{m1,2} (V_{\\text{in1}} - V_{\\text{in2}})$$\n   - Because $M_3$ and $M_4$ are initially OFF, nodes $X$ and $Y$ cannot discharge immediately; they remain held at $V_{DD}$.\n   - $M_1$ and $M_2$ first discharge the capacitances at nodes $P$ and $Q$ ($C_P$ and $C_Q$) from $V_{DD}$ down to $V_{DD} - V_{THN}$. Only when $V_P$ and $V_Q$ drop below this threshold do $M_3$ and $M_4$ turn ON and begin discharging nodes $X$ and $Y$ to develop the differential output voltage $V_{\\text{out}} = V_X - V_Y$.\n\n---\n\n### Why the Initial Voltage Gain Decreases\n\n1. **Current Shunting at Nodes $P$ and $Q$:**\n   Once $M_3$ and $M_4$ turn ON, they act as cascode devices transferring current from the output nodes $X$ and $Y$ down through $M_1$ and $M_2$. \n   The impedance looking into the sources of $M_3$ and $M_4$ is approximately $1/g_{m3,4}$. The capacitances $C_P$ and $C_Q$ appear in parallel with this impedance to AC ground. By current division, the fraction of the small-signal differential current that reaches the output nodes $X$ and $Y$ is:\n   $$i_{out} \\approx \\Delta I \\cdot \\frac{g_{m3,4}}{g_{m3,4} + s C_{P,Q}}$$\n   As $C_P$ and $C_Q$ increase, more of the signal current is shunted by the capacitors to ground and **less current reaches the output nodes $X$ and $Y$**.\n\n2. **Signal Charge Wasted on Internal Nodes:**\n   By applying charge conservation across the circuit during the integration period before regeneration starts:\n   $$C_{XY} \\Delta V_{\\text{out}} + C_P \\Delta V_{PQ} = \\int \\Delta I \\, dt$$\n   A larger capacitance $C_P$ stores a larger portion of the integrated differential charge on the internal nodes $P$ and $Q$, which diverts that signal charge from developing a voltage across the output load capacitance $C_{XY}$.\n\n3. **Reduced Overdrive of $M_3$ and $M_4$:**\n   Larger capacitances at $P$ and $Q$ cause $V_P$ and $V_Q$ to fall more slowly. This keeps $V_P$ and $V_Q$ at higher potentials, which lowers the gate-to-source overdrive voltage ($V_{GS} - V_{THN}$) of $M_3$ and $M_4$. This reduces their effective transconductance and current-driving capability to the output.\n\n4. **Intuitive Limiting Case:**\n   - **As $C_P, C_Q \\to 0$:** The differential current is instantly and fully routed to nodes $X$ and $Y$, maximizing the initial voltage gain.\n   - **As $C_P, C_Q \\to \\infty$:** Nodes $P$ and $Q$ would never discharge down to $V_{DD} - V_{THN}$ in finite time. Transistors $M_3$ and $M_4$ would never turn ON, keeping $V_X = V_Y = V_{DD}$ and yielding a gain of **zero**.\n\n---\n\n### Conclusion\nIncreasing the capacitance at nodes $P$ and $Q$ **decreases the initial voltage gain** (which in turn degrades comparator speed and increases the input-referred offset contribution of the regenerative pair $M_3 - M_6$).",
        "format": "markdown",
        "sha256": "7435b0377bfcc954e361832c6eb4ae333ee5393465b745ab1916d728ee37b0dc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the opposite of the essential result: larger capacitance slows the discharge and lengthens the amplification interval proportionally, so the initial gain remains approximately unchanged. Its discussion of delay is relevant, but it misses that this longer interval cancels the reduced voltage slope; the shunting and zero-gain limiting claims do not rescue the conclusion.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 35727,
        "total_tokens": 36816,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34593,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 35727,
        "total_tokens": 36816,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34593,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of **$M_5$** and **$M_6$** **degrades** the speed of the circuit (i.e., increases the decision/propagation delay). \n\nHere is a detailed explanation of why this happens:\n\n---\n\n### 1. The Common Misconception\nAt first glance, $M_5$ and $M_6$ appear to form a cross-coupled PMOS pair that provides positive feedback (regeneration). One might intuitively expect that increasing their widths would increase their transconductance ($g_m$), accelerating the regenerative latching and thus improving speed. \n\nHowever, in the StrongARM latch, this intuition does not hold.\n\n---\n\n### 2. Detailed Circuit Operation\n\nThe evaluation phase consists of two main stages:\n\n#### A. Initial Discharge (Sensing) Phase\n* When $CK$ transitions from low to high, the tail transistor $M_7$ turns on, and nodes $P$ and $Q$ begin discharging through the input pair $M_1$ and $M_2$.\n* Once nodes $P$ and $Q$ drop sufficiently, $M_3$ and $M_4$ turn on, initiating the discharge of the output nodes $X$ and $Y$ from $V_{DD}$.\n* During this initial drop (as long as $V_X, V_Y > V_{DD} - |V_{THP}|$), **both $M_5$ and $M_6$ are completely OFF** because their gate-to-source voltages are smaller than their threshold voltage:\n  $$|V_{GS5}| = V_{DD} - V_Y < |V_{THP}|, \\quad |V_{GS6}| = V_{DD} - V_X < |V_{THP}|$$\n* In this phase, $M_5$ and $M_6$ provide **zero current and zero transconductance ($g_m = 0$)**. They act purely as capacitive loads on nodes $X$ and $Y$ (contributing $C_{db}$, $C_{gd}$, and $C_{gs}$).\n* **Effect of larger widths:** Increasing the widths of $M_5$ and $M_6$ directly increases the parasitic capacitance at nodes $X$ and $Y$, thereby slowing down the discharge rate and delaying the onset of the next phase.\n\n---\n\n#### B. Regeneration / Output Latching Phase\n* Assume $V_{\\text{in1}} > V_{\\text{in2}}$, so node $X$ falls faster than node $Y$.\n* When $V_X$ drops below $V_{DD} - |V_{THP}|$, transistor **$M_6$ turns ON** and begins pulling node $Y$ back up toward $V_{DD}$.\n* Because node $Y$ is pulled back to $V_{DD}$, the gate of $M_5$ is held at $V_{DD}$, which means:\n  $$V_{GS5} = V_{DD} - V_Y \\approx 0$$\n* As a result, **$M_5$ never turns ON!** \n* Because only one of the PMOS devices turns on, $M_5$ and $M_6$ **do not act as a regenerative pair** in the traditional sense:\n  * Node $Y$ had only dropped slightly (by about $|V_{THP}|$), so pulling it back to $V_{DD}$ requires very little current.\n  * Node $X$ must discharge all the way down to $0\\text{ V}$ through the NMOS path ($M_3, M_1, M_7$). \n* **Effect of larger widths:** Increasing the width of $M_5$ and $M_6$ adds substantial parasitic capacitance to node $X$ ($C_{db5}$, $C_{gd5}$, and the gate capacitance of $M_6$), making it significantly harder and slower for the NMOS network to pull node $X$ down to ground.\n\n---\n\n### Conclusion\nIncreasing the widths of $M_5$ and $M_6$ adds unnecessary parasitic capacitance to the critical nodes $X$ and $Y$ without providing any beneficial regenerative drive. Therefore, **the speed degrades**. \n\n*(For this reason, $M_5$ and $M_6$ in a StrongARM latch are typically designed with **minimum or near-minimum widths**).*",
        "format": "markdown",
        "sha256": "32f3fde93496e679234f64a008a29df4e165bdac6b16e0dd3fbfe574b6d1ef5d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the wrong initial speed trend and incorrectly denies the regenerative benefit of the cross-coupled PMOS devices. It identifies added parasitic capacitance as a real eventual limitation, but misses that stronger regeneration initially improves speed.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 13861,
        "total_tokens": 14950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12914,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 13861,
        "total_tokens": 14950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12914,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of **$M_5$ and $M_6$ degrades the speed** of the comparator (i.e., it increases the total decision/latching delay, making the circuit slower).\n\nHere is a detailed explanation of why this happens:\n\n---\n\n### 1. The Initial Discharge Phase (Before Regeneration)\n* **Precharge State:** During the reset phase ($CK = 0$), switches $S_3$ and $S_4$ pull the output nodes $X$ and $Y$ up to $V_{DD}$. \n* **PMOS are OFF:** When evaluation begins ($CK \\to V_{DD}$), $M_7$ turns on and the input/cascode transistors ($M_1$–$M_4$) begin discharging nodes $X$ and $Y$ down from $V_{DD}$. \n* **Pure Capacitive Loading:** Until either node drops below $V_{DD} - |V_{THP}|$, the cross-coupled PMOS transistors $M_5$ and $M_6$ have $|V_{GS}| < |V_{THP}|$ (initially $|V_{GS}| = 0$) and are **completely turned off**. During this entire phase:\n  * They provide **zero drive current or transconductance**.\n  * They act purely as **parasitic capacitive loads** (drain junction, gate-drain overlap, and gate oxide capacitances) on nodes $X$ and $Y$.\n* Making $M_5$ and $M_6$ wider increases this capacitance linearly, directly increasing the time it takes for nodes $X$ and $Y$ to discharge to the threshold voltage where regeneration can even begin.\n\n---\n\n### 2. The Regeneration Phase\n* Once nodes $X$ and $Y$ fall below $V_{DD} - |V_{THP}|$, $M_5$ and $M_6$ turn on and participate in the positive feedback loop.\n* The regeneration time constant is roughly given by:\n  $$\\tau_{reg} \\approx \\frac{C_L}{g_{m,n} + g_{m,p}}$$\n  where $C_L$ is the total capacitance at each output node, $g_{m,n}$ is the transconductance of $M_3/M_4$, and $g_{m,p}$ is the transconductance of $M_5/M_6$.\n* Because hole mobility is significantly lower than electron mobility ($\\mu_p \\ll \\mu_n$), PMOS transistors have a much poorer transconductance-to-capacitance ratio ($g_m / C$) than NMOS transistors. \n* As a result, the additional parasitic capacitance introduced by widening $M_5$ and $M_6$ **outweighs the modest increase in $g_{m,p}$**, causing the regeneration time constant $\\tau_{reg}$ to increase (or at best stay flat).\n\n---\n\n### 3. Contention (Current Fighting)\n* As the outputs diverge, one node must be pulled down to $0$ while the other is restored to $V_{DD}$. \n* A wider PMOS injects more current into the falling output node, actively opposing (fighting) the NMOS pull-down network and slowing down the transition of that output to ground.\n\n---\n\n### Summary\nBecause wider $M_5/M_6$ transistors add parasitic capacitance during the initial sensing phase and do not provide enough $g_m$ to offset that capacitance during the regeneration phase, **the overall speed degrades**. For this reason, $M_5$ and $M_6$ in a StrongARM latch are typically designed with **minimum or near-minimum widths**.",
        "format": "markdown",
        "sha256": "4dab16455d8db85653dc069f393b5e8ed588a033bfc44e93468685016e50dd27"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the central result: widening M5/M6 initially improves speed because stronger regeneration outweighs added capacitance. It mentions both effects, but incorrectly claims capacitance dominates from the outset and recommends minimum widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 10879,
        "total_tokens": 11968,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10087,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 10879,
        "total_tokens": 11968,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10087,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of **$M_5$** and **$M_6$** **degrades the speed** (i.e., increases the overall latch delay). \n\nHere is the step-by-step circuit analysis explaining why:\n\n---\n\n### 1. Discharge / Pre-Regeneration Phase ($M_5, M_6$ are OFF)\n* When the clock $CK$ is low, nodes $X$ and $Y$ are precharged to $V_{DD}$ through switches $S_3$ and $S_4$. \n* When $CK$ transitions high, $M_7$ turns on, and $M_1$–$M_4$ begin discharging nodes $X$ and $Y$ from $V_{DD}$ toward ground.\n* Because the sources of $M_5$ and $M_6$ are tied to $V_{DD}$ and their gates (nodes $Y$ and $X$) start at $V_{DD}$, **$M_5$ and $M_6$ are initially completely OFF** ($V_{GS5} = V_{GS6} = 0$).\n* Nodes $X$ and $Y$ must first fall from $V_{DD}$ down to $V_{DD} - |V_{THP}|$ before $M_5$ and $M_6$ can even turn on.\n* During this entire initial discharge interval, $M_5$ and $M_6$ provide **zero transconductance** ($g_m = 0$) to help discharge the nodes. However, their drain, gate, and overlap capacitances ($C_{db}$, $C_{gd}$, and $C_{gs}$) load nodes $X$ and $Y$.\n* **Result:** Making $M_5$ and $M_6$ wider adds dead capacitive load to nodes $X$ and $Y$, prolonging the time it takes to reach the threshold of regeneration.\n\n---\n\n### 2. Regeneration Phase (Poor PMOS $g_m / C$ Ratio)\nOnce $V_X$ and $V_Y$ drop below $V_{DD} - |V_{THP}|$, $M_5$ and $M_6$ turn on and cross-coupled positive feedback begins. The regeneration time constant is approximately:\n$$\\tau_{\\text{reg}} \\approx \\frac{C_{\\text{total}}}{g_{mN} + g_{mP}}$$\n\n* In silicon CMOS, hole mobility is significantly lower than electron mobility ($\\mu_p \\approx \\frac{1}{2}\\text{ to }\\frac{1}{3}\\mu_n$). As a result, PMOS devices have a significantly lower transconductance-to-capacitance ratio ($g_m / C$, or transit frequency $f_T$) compared to NMOS devices.\n* Increasing the width of $M_5$ and $M_6$ adds proportionally more parasitic capacitance to the numerator ($C_{\\text{total}}$) than it contributes useful transconductance to the denominator ($g_{mN} + g_{mP}$).\n* **Result:** The regeneration time constant $\\tau_{\\text{reg}}$ increases, slowing down exponential separation.\n\n---\n\n### 3. Current Contention During Onset of Regeneration\n* When both output nodes initially cross $V_{DD} - |V_{THP}|$, both $M_5$ and $M_6$ turn on simultaneously and inject current from $V_{DD}$ into nodes $X$ and $Y$.\n* This current opposes the NMOS pull-down path that is attempting to pull the nodes down. Larger PMOS transistors inject more common-mode current, fighting the pull-down action and delaying the divergence of the differential output.\n\n---\n\n### Practical Design Takeaway\nIn a standard StrongARM latch design, **$M_5$ and $M_6$ are typically kept close to minimum size**. They only need to be large enough to restore the winning high node to $V_{DD}$; keeping them small minimizes capacitive loading and maximizes operating speed.",
        "format": "markdown",
        "sha256": "3f87dcff390f148a5b93c0280feffcd21d07ca18afd97b6c2025c8389c7aee2e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the essential result: widening M5/M6 initially improves speed because stronger regeneration outweighs added capacitance. It identifies capacitance as a real eventual limitation, but incorrectly treats it as dominant from the outset and therefore gives the wrong design conclusion.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 10423,
        "total_tokens": 11512,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9558,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 10423,
        "total_tokens": 11512,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9558,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown (a $\\text{C}^2\\text{MOS}$ frequency divider / master-slave toggle flip-flop), **the speed degrades** (i.e., the maximum operating frequency decreases) if the widths of the clocked transistors are increased.\n\n---\n\n### Detailed Explanation\n\n#### 1. Series Resistance Limitation\n* In each latch stage, the charging and discharging paths consist of the **data transistors** (e.g., $M_1$) placed in series with the **clocked transistors**.\n* Because the widths of the input/data transistors ($M_1$ and the input PMOS) are **fixed**, their on-resistances remain unchanged.\n* As the width of the clocked transistors ($W_{CK}$) increases, their on-resistance ($R_{CK} \\propto 1/W_{CK}$) decreases. However, the total path resistance is fundamentally bounded by the fixed resistance of the data transistors:\n  $$R_{\\text{total}} = R_{M1} + R_{CK}$$\n  Therefore, widening the clocked transistors yields rapidly diminishing returns in reducing the overall pull-up/pull-down resistance.\n\n---\n\n#### 2. Capacitive Loading at Nodes $X$ and $Y$\n* Notice the placement of the devices: the clocked transistors are located on the **inside** (closer to nodes $X$ and $Y$), meaning their drain terminals are directly tied to nodes $X$ and $Y$.\n* The total capacitance at node $X$ (and similarly at node $Y$) is:\n  $$C_X = C_{\\text{load}} + C_{db,CK}$$\n  where $C_{db,CK} \\propto W_{CK}$ is the junction/overlap capacitance of the clocked PMOS and NMOS devices.\n* Increasing $W_{CK}$ **linearly increases the parasitic capacitance** loading the high-impedance nodes $X$ and $Y$, as well as increasing the internal node capacitance between the data and clocked devices.\n\n---\n\n#### 3. Net Effect on $RC$ Delay and Speed\n* Using the Elmore delay approximation for node $X$ (and similarly node $Y$):\n  $$\\tau \\approx R_{M1} C_{\\text{int}} + (R_{M1} + R_{CK}) C_X$$\n  Because $R_{M1}$ is fixed, the terms containing $R_{M1} \\cdot W_{CK}$ grow linearly with $W_{CK}$, while the reduction from $R_{CK}$ scales as $1/W_{CK}$.\n* In standard designs where the clocked transistors are already sized comparably to the data transistors, the **increase in capacitance far outweighs the marginal decrease in resistance**.\n* As a result, the time constant ($\\tau$) increases, the settling time increases, and the **maximum operating speed degrades**.\n\n---\n\n#### 4. Clock Loading (Secondary Effect)\n* Larger clocked transistors also present a heavier capacitive load to the clock generation and distribution network ($CK$ and $\\overline{CK}$). \n* This increases the clock rise and fall times, which further degrades the maximum operating frequency of the divider.",
        "format": "markdown",
        "sha256": "b37218aa55177a3a60d2a5e1174d13532ed78ebfb1b441ee695ce80684587c4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer recognizes the resistance and capacitance tradeoff, but concludes that widening degrades speed. The expected trend is that speed improves initially as clocked-device on-resistance falls, with added capacitance eventually limiting or reversing the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1098,
        "output_tokens": 20932,
        "total_tokens": 22030,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20265,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1098,
        "output_tokens": 20932,
        "total_tokens": 22030,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20265,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In this circuit (a dynamic $\\text{C}^2\\text{MOS}$ divide-by-2 circuit/frequency divider), the speed **degrades** (the maximum operating frequency decreases) if the widths of the clocked transistors are increased.\n\n---\n\n### **Detailed Explanation**\n\n#### 1. **Capacitive Loading at the Critical Nodes ($X$ and $Y$)**\n* The clocked transistors are placed as the **inner transistors** of the tristate inverters, meaning their drains are directly connected to nodes $X$ and $Y$.\n* Increasing the width ($W_{CK}$) of the clocked transistors linearly increases their **drain-bulk junction capacitance** ($C_{db}$) and **gate-drain overlap capacitance** ($C_{gd}$).\n* Consequently, the total parasitic capacitance at nodes $X$ and $Y$ increases significantly:\n  $$C_{X,Y} \\approx C_{\\text{load}} + \\alpha W_{CK}$$\n\n#### 2. **Diminishing Returns on Series Resistance**\n* The clocked transistors are connected in series with the data-driven transistors ($M_1$ at the bottom and the outer PMOS at the top).\n* The widths of the data transistors are fixed (labeled as $M_1$). Therefore, their on-resistance ($R_{M1}$) sets a fixed lower bound on the total pull-up/pull-down resistance:\n  $$R_{\\text{total}} = R_{M1} + R_{CK} = R_{M1} + \\frac{k}{W_{CK}}$$\n* As $W_{CK}$ increases, $R_{CK}$ decreases, but $R_{\\text{total}}$ quickly saturates to $R_{M1}$. \n* Evaluating the resulting $RC$ propagation delay:\n  $$\\tau \\approx R_{\\text{total}} \\cdot C_{X,Y} = \\left(R_{M1} + \\frac{k}{W_{CK}}\\right)(C_{\\text{load}} + \\alpha W_{CK})$$\n  Because the resistance approaches a non-zero floor while the capacitance continues to grow linearly with $W_{CK}$, the overall $RC$ time constant increases for larger widths, **slowing down the signal propagation**.\n\n#### 3. **Increased Clock Loading and Slower Slew Rates**\n* The gates of the clocked transistors are driven by the clock lines ($CK$ and $\\overline{CK}$).\n* Increasing their widths increases the capacitive load seen by the clock generator/distribution network ($C_{g,CK} \\propto W_{CK}$).\n* Slower clock transitions (longer rise and fall times) delay the switching of the latches, further **degrading the maximum operating frequency**.\n\n#### 4. **Clock Feedthrough and Dynamic Charge Injection**\n* Larger clocked devices have larger gate-to-drain overlap capacitances ($C_{gd}$). When $CK$ and $\\overline{CK}$ switch, this causes larger clock feedthrough onto the high-impedance dynamic nodes $X$ and $Y$, perturbing the held logic levels and degrading signal integrity and noise margins.\n\n---\n\n### **Conclusion**\nIn a practical design where transistors are already reasonably sized (typically $W_{CK} \\approx W_{M1}$), the penalty from the added self-loading capacitance at nodes $X$ and $Y$ and the added clock load far outweighs the slight reduction in switch on-resistance. Therefore, **the speed degrades**.",
        "format": "markdown",
        "sha256": "b57d6536bf6336b812d69edade60c2965437b3aaf430b3e7f439711c679ed29c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer recognizes that widening the clocked devices lowers their on-resistance but concludes that speed degrades. The expected trend is an initial speed improvement from the reduced resistance, with added capacitance limiting or eventually reversing the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1098,
        "output_tokens": 25491,
        "total_tokens": 26589,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24762,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1098,
        "output_tokens": 25491,
        "total_tokens": 26589,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24762,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown in the figure (a **$\\text{C}^2\\text{MOS}$ master-slave divide-by-2 circuit**), increasing the widths of the clocked transistors **degrades the speed** (reduces the maximum operating frequency).\n\n---\n\n### **Detailed Analysis**\n\n#### 1. **Placement of the Clocked Transistors**\nIn both $\\text{C}^2\\text{MOS}$ stages, notice that:\n* The **data transistors** (such as $M_1$ and the top PMOS) are placed on the **outside** (connected directly to the supply rails $V_{DD}$ and ground).\n* The **clocked transistors** are placed on the **inside**, with their drains connected directly to the critical switching nodes (**$X$** and **$Y$**).\n\n---\n\n#### 2. **Effect on Node Capacitance**\nThe total capacitance at node $X$ (and similarly node $Y$) consists of:\n$$C_X = C_{\\text{gate, stage 2}} + C_{db,ckP} + C_{db,ckN} + C_{gd,ckP} + C_{gd,ckN}$$\n\n* $C_{\\text{gate, stage 2}}$ is the input gate capacitance of the next stage (which remains constant because the data transistors are not widened).\n* $C_{db,ck}$ and $C_{gd,ck}$ are the junction and overlap capacitances of the clocked transistors. \n\nBecause the drains of the clocked transistors are tied directly to node $X$, **widening the clocked transistors increases $C_X$ linearly with their width**.\n\n---\n\n#### 3. **Effect on Path Resistance**\nWhen node $X$ is pulled down or pulled up:\n* The pull-down path consists of the clocked NMOS in series with the input NMOS ($M_1$):\n  $$R_{\\text{pull-down}} = R_{M1} + R_{ckN}$$\n* Since the width of the input transistor $M_1$ is **held constant**, $R_{M1}$ remains unchanged and sets a fixed lower bound on the pull-down resistance ($R_{\\text{pull-down}} > R_{M1}$).\n* Increasing the width of the clocked transistor reduces $R_{ckN}$, but this provides **diminishing returns** as $R_{ckN}$ becomes much smaller than $R_{M1}$.\n\n---\n\n#### 4. **Net RC Time Constant and Speed**\nThe delay of node $X$ is governed by the time constant:\n$$\\tau_X \\approx R_{\\text{pull-down}} \\cdot C_X = \\left(R_{M1} + \\frac{k_R}{W_{ck}}\\right)\\left(C_{\\text{fixed}} + k_C W_{ck}\\right)$$\n\nExpanding this product:\n$$\\tau_X \\approx R_{M1} C_{\\text{fixed}} + k_R k_C + \\underbrace{R_{M1} k_C W_{ck}}_{\\text{increases with } W_{ck}} + \\underbrace{\\frac{k_R C_{\\text{fixed}}}{W_{ck}}}_{\\text{decreases with } W_{ck}}$$\n\nIn a standard design where transistors already have comparable sizes:\n* The reduction in total on-resistance is strictly limited by $R_{M1}$.\n* The capacitance added to node $X$ ($R_{M1} k_C W_{ck}$) dominates and increases steadily with $W_{ck}$.\n\nConsequently, the **net $RC$ delay increases**, meaning the switching speed **degrades**.\n\n---\n\n### **Secondary Detrimental Effects**\n1. **Clock Loading:** Widening the clocked transistors increases the capacitance presented to the clock distribution network ($CK$ and $\\overline{CK}$). This slows the clock edge rates (rise/fall times), further reducing maximum operating speed.\n2. **Clock Feedthrough:** Larger clocked devices inject more charge through their $C_{gd}$ overlap capacitances into nodes $X$ and $Y$, degrading noise margins and switching transitions.\n\n---\n\n### **Conclusion**\nBecause the clocked devices are on the inside and directly load the high-impedance switching nodes $X$ and $Y$, the increase in capacitance rapidly outweighs the reduction in resistance, causing the speed to **degrade**.",
        "format": "markdown",
        "sha256": "a111a7baa565cdd5ddfc0ea88953a18ed7e1d604c5b473f8c5df6de4967ef593"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the series-path resistance and added node capacitance, but concludes that widening degrades speed. The golden solution says widening improves speed initially as clocked-device resistance falls, with capacitance limiting or eventually reversing the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1098,
        "output_tokens": 20492,
        "total_tokens": 21590,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1098,
        "output_tokens": 20492,
        "total_tokens": 21590,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, the structure in the figure **does provide quadrature outputs** (specifically between nodes $X$ and $Y$, or nodes $X$ and $Z$), **provided that the input clock ($CK$) has a 50% duty cycle**.\n\n---\n\n### 1. Circuit Identification and Operation\n\nThe circuit is a dynamic **$\\text{C}^2\\text{MOS}$ divide-by-2 frequency divider**:\n* **Stage 1 (Master Latch):** A clocked $\\text{C}^2\\text{MOS}$ inverter driven by clock phase $CK$. It is **transparent (evaluates)** when $CK = 1$ ($\\overline{CK} = 0$) and **opaque (holds dynamically)** when $CK = 0$.\n* **Stage 2 (Slave Latch):** A clocked $\\text{C}^2\\text{MOS}$ inverter driven by the opposite clock phase. It is **transparent (evaluates)** when $CK = 0$ ($\\overline{CK} = 1$) and **opaque (holds dynamically)** when $CK = 1$.\n* **Stage 3 ($\\text{Inv}_3$):** A static CMOS inverter that provides an odd number of total inversions around the feedback loop (3 inverters total). This ensures overall **negative feedback** at DC, causing the circuit to toggle rather than latch up.\n\n---\n\n### 2. Timing and Quadrature Proof\n\nLet $T_{CK}$ be the period of the clock, assuming a 50% duty cycle (high time = low time = $T_{CK}/2$).\n\nTracing the circuit through four consecutive half-cycles:\n\n| Half-Cycle | Clock | Stage 1 (Master) | Stage 2 (Slave) | Node $X$ | Node $Y$ | Node $Z$ ($=\\overline{Y}$) |\n| :---: | :---: | :---: | :---: | :---: | :---: | :---: |\n| **1** | $CK = 1$ | Transparent ($X = \\overline{Z}$) | Holds previous value | **1** | **1** (held) | **0** |\n| **2** | $CK = 0$ | Holds previous value | Transparent ($Y = \\overline{X}$) | **1** (held) | **0** | **1** |\n| **3** | $CK = 1$ | Transparent ($X = \\overline{Z}$) | Holds previous value | **0** | **0** (held) | **1** |\n| **4** | $CK = 0$ | Holds previous value | Transparent ($Y = \\overline{X}$) | **0** (held) | **1** | **0** |\n\n#### Key Observations:\n1. **Frequency Division:** \n   The complete sequence takes $4 \\times (T_{CK}/2) = 2T_{CK}$. Thus, the period of the output signals is:\n   $$T_{out} = 2T_{CK} \\implies f_{out} = \\frac{f_{CK}}{2}$$\n\n2. **Phase Relationship:**\n   * Transitions at node $X$ are triggered by the **rising edges** of $CK$ ($t = 0, T_{CK}, 2T_{CK}, \\dots$).\n   * Transitions at node $Y$ (and $Z$) are triggered by the **falling edges** of $CK$ ($t = T_{CK}/2, 3T_{CK}/2, \\dots$).\n   * The time difference between the transitions of $X$ and $Y$ (or $Z$) is exactly half a clock cycle:\n     $$\\Delta t = \\frac{T_{CK}}{2} = \\frac{T_{out}}{4}$$\n   * A time shift of one-quarter of the output period corresponds to a phase difference of:\n     $$\\Delta \\theta = \\frac{T_{out}/4}{T_{out}} \\times 360^\\circ = 90^\\circ$$\n\nExpressed as fundamental Fourier components:\n$$X_1(t) \\propto \\sin(\\omega_{out} t)$$\n$$Y_1(t) \\propto \\cos(\\omega_{out} t)$$\n$$Z_1(t) \\propto -\\cos(\\omega_{out} t)$$\n\nBecause $X$ and $Y$ represent sine and cosine terms ($90^\\circ$ phase shift), they are **in quadrature**.\n\n---\n\n### 3. Common Misconceptions & Practical Nuances\n\n* **The 3-Stage Ring Oscillator Fallacy:** At first glance, having three inverters in a loop might suggest the phase difference between consecutive stages is $120^\\circ$ ($360^\\circ / 3$). However, this is a **clocked divider**, not an autonomous ring oscillator. Transitions are governed by the clock edges, not the free-running gate propagation delays.\n* **Clock Duty Cycle Dependency:** The $90^\\circ$ phase difference strictly relies on the input clock having a **50% duty cycle**. If $CK$ has a duty cycle $D \\neq 50\\%$, the phase difference will be $\\Delta \\theta = D \\times 180^\\circ \\neq 90^\\circ$.\n* **Dynamic Loading:** Nodes $X$ and $Y$ are high-impedance dynamic nodes during their respective hold phases. In a practical circuit, they must be buffered with identical inverters to drive subsequent stages without corrupting stored charge.\n* **Delay of $\\text{Inv}_3$:** If the outputs are taken as $X$ and $Z$, the propagation delay of $\\text{Inv}_3$ adds a small phase error. Taking the outputs at $X$ and $Y$ (with matched buffers) avoids this systematic delay mismatch.",
        "format": "markdown",
        "sha256": "7052ec1d84874c4efb206aa3ac66c4d7a8bdfb06183aa0e48f7ca522418143ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature and notes that Inv3 delay skews Z. However, it misses the unequal loading of the two latch outputs, which can also make X and Y non-quadrature; matched output buffers do not remove that internal mismatch.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 32198,
        "total_tokens": 33282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30946,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 32198,
        "total_tokens": 33282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30946,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Direct Answer**\n\n**In theory (ideally): Yes**, the circuit provides two signals ($X$ and $Y$) that are in quadrature ($90^\\circ$ phase difference).\n\n**In practice: No (or not reliably)**, because:\n1. The $90^\\circ$ relationship strictly depends on the input clock having an **exact 50% duty cycle**.\n2. Both outputs $X$ and $Y$ are **dynamic (floating)** during half of every clock cycle.\n3. The circuit provides only **three phases** ($0^\\circ, 90^\\circ, 270^\\circ$), missing the fourth phase ($180^\\circ$) needed for a complete differential quadrature set ($I, Q, \\overline{I}, \\overline{Q}$).\n\n---\n\n### **1. Circuit Identification and Operation**\n\nThe circuit consists of:\n* **Stage 1 (Left):** A $\\text{C}^2\\text{MOS}$ clocked inverter. It is **transparent** (evaluating) when $CK = 1$ ($\\overline{CK} = 0$) and in **hold** (high-impedance/floating) when $CK = 0$.\n* **Stage 2 (Right):** A $\\text{C}^2\\text{MOS}$ clocked inverter. It is **transparent** when $CK = 0$ ($\\overline{CK} = 1$) and in **hold** when $CK = 1$.\n* **Stage 3 ($\\text{Inv}_3$):** A static CMOS inverter providing negative feedback from $Y$ to the input $Z$.\n\nBecause the loop contains two cascaded latches clocked on opposite phases and an odd number of total inversions ($3$ inversions: Stage 1, Stage 2, and $\\text{Inv}_3$), this circuit operates as a **master-slave toggle flip-flop configured as a divide-by-2 frequency divider** ($f_{out} = f_{CK} / 2$).\n\n---\n\n### **2. Timing and Phase Analysis**\n\nAssuming an ideal input clock with period $T_{CK}$ and a **50% duty cycle**:\n\n| Half-Cycle | Clock ($CK$) | Node $X$ | Node $Y$ | Node $Z = \\overline{Y}$ |\n| :---: | :---: | :---: | :---: | :---: |\n| **1** | $1$ | Pulls to $\\overline{Z} = 0$ (Driven) | Holds $0$ (Floating) | $1$ |\n| **2** | $0$ | Holds $0$ (Floating) | Pulls to $\\overline{X} = 1$ (Driven) | Transitions to $0$ |\n| **3** | $1$ | Pulls to $\\overline{Z} = 1$ (Driven) | Holds $1$ (Floating) | $0$ |\n| **4** | $0$ | Holds $1$ (Floating) | Pulls to $\\overline{X} = 0$ (Driven) | Transitions to $1$ |\n\n* The output period is $T_{out} = 2T_{CK}$.\n* **Transitions of $X$** are triggered by the **rising edges** of $CK$.\n* **Transitions of $Y$** are triggered by the **falling edges** of $CK$.\n\nThe time shift between the edges of $X$ and $Y$ is:\n$$\\Delta t = \\frac{T_{CK}}{2} = \\frac{T_{out}}{4}$$\n\nThe resulting phase difference between $X$ and $Y$ is:\n$$\\Delta \\phi = \\frac{\\Delta t}{T_{out}} \\times 360^\\circ = \\frac{T_{out}/4}{T_{out}} \\times 360^\\circ = 90^\\circ$$\n\nThus, nominally, $X$ and $Y$ behave as **in-phase ($I$)** and **quadrature ($Q$)** signals.\n\n---\n\n### **3. Why the Practical Answer is Often \"NO\"**\n\nIn practical IC design, this topology is rarely considered a true or acceptable quadrature generator due to several critical flaws:\n\n1. **High Sensitivity to Clock Duty Cycle:**\n   If the input clock duty cycle $D_{CK} \\neq 50\\%$, the time between the rising and falling edges is $D_{CK} \\cdot T_{CK}$. The phase shift becomes:\n   $$\\Delta \\phi = 180^\\circ \\times D_{CK} \\neq 90^\\circ$$\n   Any duty-cycle distortion (DCD) in the clock directly translates into a **quadrature phase error**. *(In contrast, standard dividers using two flip-flops triggered on the same clock edge produce quadrature phases completely independent of the clock duty cycle).*\n\n2. **Floating/High-Impedance Output Nodes:**\n   * Node $X$ floats when $CK = 0$.\n   * Node $Y$ floats when $CK = 1$.\n   Because these nodes are dynamic, connecting any external load causes severe **charge sharing, leakage droop, and clock feedthrough**, degrading signal integrity.\n\n3. **Incomplete 4-Phase Set:**\n   A full quadrature generator typically produces four phases: $0^\\circ, 90^\\circ, 180^\\circ, 270^\\circ$.\n   * $X \\approx 0^\\circ$\n   * $Y \\approx 90^\\circ$\n   * $Z \\approx 270^\\circ$ (delayed by the propagation delay of $\\text{Inv}_3$)\n   * **The $180^\\circ$ phase ($\\overline{X}$) is completely missing.**\n\n4. **Phase Skew due to $\\text{Inv}_3$ Delay:**\n   Node $Z$ is not an exact inverse of $Y$; it is delayed by the propagation delay $t_{p,\\text{inv3}}$ of $\\text{Inv}_3$, introducing further phase asymmetry into the loop.",
        "format": "markdown",
        "sha256": "e3dd44550457d6ed0f942ac196e554d1dd1c30125e9062509ec3c6000b2dd8be"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature and notes Inv3 delay, but misses the unequal latch loading that can make X and Y themselves depart from 90°. The extra practical objections do not replace that key mechanism.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 25387,
        "total_tokens": 26471,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24073,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 25387,
        "total_tokens": 26471,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24073,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, **theoretically and logically, the structure provides quadrature outputs**, but with **important practical caveats**.\n\nBelow is a detailed analysis of how the circuit functions, how the quadrature relationship arises, and the practical limitations of this structure.\n\n---\n\n### 1. Circuit Topology & Operation\nThe circuit is a **dynamic $\\text{C}^2\\text{MOS}$ master-slave toggle flip-flop** configured as a **divide-by-2 frequency divider**:\n\n* **Stage 1 (Master Latch):** Clocked by $\\overline{CK}$ on the PMOS and $CK$ on the NMOS.\n  * When $CK = 1$ ($\\overline{CK} = 0$), Stage 1 is **active (transparent)** and evaluates $X = \\overline{Z}$.\n  * When $CK = 0$ ($\\overline{CK} = 1$), Stage 1 is in **high-impedance (tri-state)**; node $X$ dynamically holds its charge.\n* **Stage 2 (Slave Latch):** Clocked by $CK$ on the PMOS and $\\overline{CK}$ on the NMOS.\n  * When $CK = 0$ ($\\overline{CK} = 1$), Stage 2 is **active (transparent)** and evaluates $Y = \\overline{X}$.\n  * When $CK = 1$ ($\\overline{CK} = 0$), Stage 2 is in **high-impedance (tri-state)**; node $Y$ dynamically holds its charge.\n* **Inverter $\\text{Inv}_3$:** A static CMOS inverter providing $Z = \\overline{Y}$. Because the loop contains three inversions (an odd number), the circuit continuously toggles on successive clock cycles, dividing the clock frequency by $2$ ($f_{\\text{out}} = f_{CK}/2$, so $T_{\\text{out}} = 2T_{CK}$).\n\n---\n\n### 2. State Progression Across Clock Cycles\nAssuming an input clock $CK$ with period $T_{CK}$ and a 50% duty cycle, let us trace four consecutive half-cycles:\n\n| Half-Cycle | Clock State | Master (Stage 1) | Slave (Stage 2) | Node $X$ | Node $Y$ | Node $Z$ ($\\overline{Y}$) |\n|:---:|:---:|:---:|:---:|:---:|:---:|:---:|\n| **1** | $CK = 1$ | Active ($X \\leftarrow \\overline{Z}$) | Holding | **0** | **0** | **1** |\n| **2** | $CK = 0$ | Holding | Active ($Y \\leftarrow \\overline{X}$) | **0** | **1** | **0** |\n| **3** | $CK = 1$ | Active ($X \\leftarrow \\overline{Z}$) | Holding | **1** | **1** | **0** |\n| **4** | $CK = 0$ | Holding | Active ($Y \\leftarrow \\overline{X}$) | **1** | **0** | **1** |\n\n---\n\n### 3. Quadrature Relationship\nFrom the sequence above:\n* **Node $X$** transitions exclusively on the **rising edges** of $CK$.\n* **Node $Y$** transitions exclusively on the **falling edges** of $CK$.\n* The time difference between the transitions of $X$ and $Y$ is:\n  $$\\Delta t = \\frac{T_{CK}}{2}$$\n* With the output period being $T_{\\text{out}} = 2T_{CK}$, the phase difference between $X$ and $Y$ is:\n  $$\\Delta \\phi = \\frac{\\Delta t}{T_{\\text{out}}} \\times 360^\\circ = \\frac{T_{CK}/2}{2T_{CK}} \\times 360^\\circ = 90^\\circ$$\n\nBoth $X$ and $Y$ have a 50% duty cycle and are separated by a quarter of the output period ($90^\\circ$), meaning **$X$ and $Y$ (as well as $X$ and $Z$) form a quadrature pair ($I/Q$)**.\n\n---\n\n### 4. Practical Caveats & Limitations\nIn practice, several real-world effects must be taken into account:\n\n1. **Clock Duty Cycle Dependency:**\n   * The $90^\\circ$ phase shift strictly requires a **50% clock duty cycle**. If the clock duty cycle is $D_{CK}$, the phase difference becomes:\n     $$\\Delta \\phi = 180^\\circ \\times D_{CK}$$\n     Any clock duty-cycle distortion translates directly into quadrature phase error.\n\n2. **Dynamic (Floating) Nodes:**\n   * Nodes $X$ and $Y$ are **dynamic nodes** that float during alternating half-cycles. \n   * As drawn, they cannot directly drive low-impedance or off-chip loads without charge leakage corrupting the state. To use them externally as quadrature outputs, **buffers must be added** to nodes $X$ and $Y$.\n   * Subthreshold leakage limits the **minimum operating frequency** of this circuit.\n\n3. **Asymmetric Loading & Delay:**\n   * Node $Y$ is loaded by $\\text{Inv}_3$, whereas node $X$ is loaded by the gates of Stage 2. \n   * If $(X, Z)$ is chosen as the quadrature pair, node $Z$ incurs an additional propagation delay through $\\text{Inv}_3$, introducing a phase mismatch at high frequencies.",
        "format": "markdown",
        "sha256": "e7dcf3ab34eb93068b267305fc8fd4023ff9a3b57197f15a67bc009c1d196e7b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from latch transitions half an input period apart, and notes both the Inv3 delay affecting Z and the unequal loading of X and Y. These satisfy the key practical caveats.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 28664,
        "total_tokens": 29748,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27452,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 28664,
        "total_tokens": 29748,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27452,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The speed improves.**\n\n---\n\n### **Detailed Explanation**\n\n#### **1. Circuit Identification and Function**\nThe circuit is a dynamic **$C^2\\text{MOS}$ frequency divider** (a toggle flip-flop configured as a divide-by-$2$ circuit). It consists of:\n- **Stage 1 (Master):** A $C^2\\text{MOS}$ latch active when $CK = 1$ ($\\overline{CK} = 0$).\n- **Stage 2 (Slave):** A $C^2\\text{MOS}$ latch active when $CK = 0$ ($\\overline{CK} = 1$).\n- **Inverter:** Connects the output of Stage 2 back to the input of Stage 1 to provide negative feedback (toggling on each clock cycle).\n\nThe **speed** of this divider is defined by its maximum operating/toggle frequency ($f_{\\max}$), which is inversely proportional to the sum of the propagation delays through the two stages and the inverter:\n$$f_{\\max} \\approx \\frac{1}{t_{p1} + t_{p2} + t_{p,\\text{inv}}}$$\n\n---\n\n#### **2. Effect of Increasing the Width of Clocked Transistors**\n\nIn each $C^2\\text{MOS}$ stage:\n1. **Positioning of the Transistors:**\n   - The **clocked transistors** are located on the **outside** (directly connected to the supply rails: $V_{DD}$ and GND).\n   - The **data/input transistors** are located on the **inside** (directly connected to the output nodes).\n\n2. **Impact on On-Resistance ($R_{\\text{on}}$):**\n   - The effective charging/discharging path of each stage consists of a series combination of a clocked transistor and a data transistor.\n   - The on-resistance of the clocked transistors scales inversely with their channel width:\n     $$R_{\\text{on,clk}} \\propto \\frac{1}{W_{\\text{clk}}}$$\n   - Increasing $W_{\\text{clk}}$ significantly **reduces $R_{\\text{on,clk}}$**, allowing larger charging and discharging currents to flow.\n\n3. **Impact on Output Node Capacitance ($C_{\\text{out}}$):**\n   - Because the clocked transistors are placed at the supply rails, their drain-body junction capacitances appear at the **internal source nodes** of the inner data transistors, **not** at the output nodes.\n   - The output node capacitance is determined solely by the drain junctions of the inner (data) transistors, interconnects, and the input gate capacitance of the subsequent stage.\n   - Therefore, increasing $W_{\\text{clk}}$ **does not increase the capacitance at the output node**.\n\n4. **Propagation Delay:**\n   - The delay to charge/discharge the output nodes is dominated by:\n     $$t_p \\approx (R_{\\text{on,clk}} + R_{\\text{on,data}}) C_{\\text{out}}$$\n   - Since $R_{\\text{on,clk}}$ decreases while $C_{\\text{out}}$ remains constant, the propagation delay $t_p$ **decreases**. \n   - Consequently, the circuit can cycle faster, and **the maximum operating frequency (speed) improves**.\n\n---\n\n### **Contrast with Alternative Placement**\nIf the clocked transistors had been placed on the **inside** (with their drains connected directly to the output node), increasing their widths would have loaded the output node with additional parasitic capacitance, leading to a trade-off where speed would eventually degrade. \n\nBecause they are positioned at the rails in this circuit, increasing their width provides the benefit of reduced resistance without the penalty of increased output loading.\n\n*(Note: In practical implementations where the clock is driven by a buffer with non-zero output impedance, extremely large clocked transistors would eventually increase clock rise/fall times due to gate capacitance loading; however, from an intrinsic circuit topology perspective, the circuit speed **improves**).*",
        "format": "markdown",
        "sha256": "e2b774028f2119213052430d9e926d98d543401d1166166a8fa588a7d1bbb8f9"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that speed improves because widening the clocked transistors lowers their series resistance without substantially loading the outputs. It omits the charge-sharing effect that degrades swing and limits the improvement, so it does not meet the full-credit rule.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 54756,
        "total_tokens": 56966,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 53048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1105,
        "output_tokens": 27378,
        "total_tokens": 28483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26524,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine whether the speed improves or degrades when the widths of the clocked transistors ($W_{ck}$) are increased, we must analyze how the **effective resistance** and the **critical node capacitances** change.\n\n---\n\n### 1. Direct Answer\n* **Under standard circuit assumptions (ideal or sufficiently strong clock drivers):** The speed **improves**.\n* **In a practical system with finite clock drive strength:** The speed **improves up to an optimum point, beyond which it degrades**.\n\n---\n\n### 2. Circuit Operation and Topology Analysis\nThe circuit shown is a classic **$C^2\\text{MOS}$ divide-by-2 circuit (toggle flip-flop)** consisting of two cascaded dynamic $C^2\\text{MOS}$ inverting stages in a negative feedback loop closed by a static inverter.\n\nA crucial feature of this schematic is the **placement of the transistors**:\n* **Clocked transistors** are placed at the **outer positions** (connected directly to the supply rails, $V_{DD}$ and Ground).\n* **Data (input) transistors** are placed at the **inner positions** (connected directly to the sensitive output/storage nodes).\n\n---\n\n### 3. Why Speed Improves (Intrinsic Delay Analysis)\n\n#### A. Reduction in Path Resistance\nIn each half-clock cycle, one stage evaluates by charging or discharging its output node through a series combination of a clocked transistor and a data transistor:\n$$R_{\\text{pull-down}} = R_{\\text{on, data}} + R_{\\text{on, ck}}$$\n$$R_{\\text{pull-up}} = R_{\\text{on, data}} + R_{\\text{on, ck}}$$\n\nAs the width of the clocked transistors $W_{ck}$ is increased:\n$$R_{\\text{on, ck}} \\propto \\frac{1}{W_{ck}}$$\nThe on-resistance of the clocked devices decreases, increasing the drive current and reducing the total series resistance of the charging and discharging paths.\n\n#### B. Output Node Capacitance is Unchanged\nBecause the clocked transistors are located at the supply rails, the dynamic output nodes (which determine the propagation delay) are connected **only** to:\n1. The drain junctions of the inner **data** transistors.\n2. The gate capacitances of the next stage's inner **data** transistors.\n\nThe capacitance of the critical output node ($C_{\\text{out}}$) **does not depend on $W_{ck}$**. \n\n#### C. Effect on the Intermediate Node\nThe intermediate node between the clocked transistor and the data transistor has a capacitance:\n$$C_{\\text{int}} = C_{db,\\text{ck}} + C_{sb,\\text{data}} \\approx \\alpha W_{ck} + \\beta W_{\\text{data}}$$\n\nUsing the Elmore delay model for the pull-down/pull-up network:\n$$\\tau \\approx R_{\\text{on, ck}} C_{\\text{int}} + (R_{\\text{on, ck}} + R_{\\text{on, data}}) C_{\\text{out}}$$\nSubstituting $R_{\\text{on, ck}} \\approx \\frac{r_0}{W_{ck}}$:\n$$\\tau \\approx r_0 \\alpha + R_{\\text{on, data}} C_{\\text{out}} + \\frac{r_0 (\\beta W_{\\text{data}} + C_{\\text{out}})}{W_{ck}}$$\n\n* As $W_{ck}$ increases, the term $\\frac{r_0 (\\beta W_{\\text{data}} + C_{\\text{out}})}{W_{ck}}$ **strictly decreases**.\n* The term $R_{\\text{on, ck}} C_{db,\\text{ck}} \\approx r_0 \\alpha$ remains **constant** because the reduction in resistance ($1/W_{ck}$) exactly cancels the increase in junction capacitance ($W_{ck}$).\n\nTherefore, the intrinsic propagation delay $\\tau$ decreases monotonically, and the **operating speed improves**.\n\n---\n\n### 4. Secondary & Practical Considerations (When It Can Degrade)\n\n1. **Clock Line Loading (Extrinsic Delay):**\n   * The gate capacitance of the clocked transistors scales directly with $W_{ck}$ ($C_{\\text{gate}} \\propto W_{ck}$). \n   * If the clock signals ($CK$ and $\\overline{CK}$) are driven by clock buffers with finite output resistance, larger widths increase the clock rise and fall times, which degrades the maximum toggle frequency.\n2. **Diminishing Returns:**\n   * As $W_{ck} \\gg W_{\\text{data}}$, $R_{\\text{on, ck}} \\to 0$. The delay asymptotically approaches a lower limit set entirely by $R_{\\text{on, data}} C_{\\text{out}}$, giving no further speed improvement.\n3. **Charge Sharing:**\n   * Larger $W_{ck}$ increases the capacitance at the internal node. During the hold phase, when the data input switches, charge sharing between this internal node and the floating output node increases, which can degrade voltage margins.\n\n---\n\n### Summary\nBecause the clocked transistors are placed at the **supply rails** rather than the output node, widening them reduces their on-resistance without adding parasitic capacitance to the critical output node. Consequently, **the speed of the circuit improves** (up to the point where clock loading begins to dominate).",
        "format": "markdown",
        "sha256": "be9fe1783990a1fb97bdc2a69c020a2f9a538c866403e09db3454a6b52fefc3b"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening the clocked devices improves intrinsic speed by lowering their series on-resistance while adding little output loading. It also identifies internal-node charge sharing as a swing-margin concern and notes practical clock loading as a limit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 54576,
        "total_tokens": 56786,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 52290,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1105,
        "output_tokens": 27288,
        "total_tokens": 28393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26145,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, the speed (maximum operating frequency) **improves** under standard circuit assumptions, though in a practical implementation with finite clock drive strength, it exhibits **diminishing returns and can eventually degrade**.\n\nHere is the detailed step-by-step analysis:\n\n---\n\n### 1. Circuit Identification and Operation\nThe circuit is a **dynamic $\\text{C}^2\\text{MOS}$ frequency divider (divide-by-2)**:\n* **Stage 1 (Master Latch):** Clocked by $\\overline{CK}$ (top PMOS) and $CK$ (bottom NMOS). It evaluates when $CK = 1$ ($\\overline{CK} = 0$) and holds its output dynamically when $CK = 0$.\n* **Stage 2 (Slave Latch):** Clocked by $CK$ (top PMOS) and $\\overline{CK}$ (bottom NMOS). It holds when $CK = 1$ and evaluates when $CK = 0$.\n* **Inverter:** Provides the third inversion in the feedback loop, creating negative feedback (toggle operation, $D = \\bar{Q}$).\n\n---\n\n### 2. Why the Speed Improves (Intrinsic Delay)\n\nIn this topology:\n1. **Clocked Transistors are at the Supplies (Outer Transistors):**\n   * The clocked transistors are placed at the rails ($V_{DD}$ and $GND$), while the data signals drive the **inner transistors**.\n   * Consequently, the critical output nodes of each latch are connected to the drains of the **inner transistors**, not the clocked transistors.\n\n2. **No Additional Capacitive Load on the Signal Path:**\n   * Increasing the widths ($W_{CK}$) of the clocked transistors increases their gate capacitance, but these gates are connected to the clock lines ($CK$ and $\\overline{CK}$), **not to the data/signal path**. \n   * The input capacitance seen by the preceding stages (and the feedback inverter) is determined solely by the gate capacitance of the **inner (data) transistors**, which remains unchanged.\n\n3. **Reduction in Series On-Resistance:**\n   * The on-resistance of the clocked transistors decreases inversely with their width:\n     $$R_{on,CK} \\propto \\frac{1}{W_{CK}}$$\n   * The Elmore delay $\\tau$ for charging/discharging the output node capacitance $C_{out}$ is approximately:\n     $$\\tau \\approx R_{on,CK} C_{int} + (R_{on,CK} + R_{on,data}) C_{out}$$\n     where $C_{int} \\approx C_{db,CK} + C_{sb,data}$ is the internal node capacitance.\n   * While $C_{db,CK} \\propto W_{CK}$, the product $R_{on,CK} C_{db,CK}$ is an intrinsic RC delay of the technology and remains roughly constant.\n   * The dominant term, $R_{on,CK} C_{out}$, scales with $\\frac{1}{W_{CK}}$ and **decreases** as $W_{CK}$ increases.\n\nBecause the pull-up and pull-down networks can charge and discharge the output nodes faster without adding capacitive load to the signal path, the propagation delays through Stage 1 and Stage 2 decrease. **Therefore, the intrinsic speed (maximum operating frequency) improves.**\n\n---\n\n### 3. Practical Limitation (When Speed Can Degrade)\n\nIn a practical system, there are two caveats to keep in mind:\n* **Clock Driver Loading:** The gate capacitance of the clocked transistors ($C_{g,CK} \\propto W_{CK}$) directly loads the clock distribution network. If the clock is driven by buffers/sources with finite output impedance, larger $W_{CK}$ degrades the clock transition times (slower rise/fall times), which narrows the effective evaluation time and can **degrade** the maximum operating speed.\n* **Diminishing Returns:** As $W_{CK} \\to \\infty$, $R_{on,CK} \\to 0$, and the speed becomes bottlenecked entirely by the data transistors ($R_{on,data} C_{out}$) and the static inverter delay.\n\n---\n\n### Conclusion\n* **Assuming an ideal/sufficiently strong clock source:** The speed **improves** because the on-resistance in the discharge/charge path decreases without adding capacitive load to the signal loop.\n* **If clock-driver loading is considered:** The speed improves initially, reaches an optimum, and then **degrades** due to degraded clock edge slopes.",
        "format": "markdown",
        "sha256": "da894727939e7139438f71c822743cf6ed33528519d847e4d24545a6672ee9f9"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that speed improves as wider clocked transistors reduce series on-resistance and add little loading to the output path. It omits the charge-sharing swing degradation that the golden solution requires for full credit; its practical clock-loading caveat does not replace that point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2210,
        "output_tokens": 49174,
        "total_tokens": 51384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47224,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1105,
        "output_tokens": 24587,
        "total_tokens": 25692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the components and their connections, here is a detailed analysis of the circuit.\n\n---\n\n### 1. Circuit Identification and Architecture\n\nThe circuit is a **dynamic frequency divider by 2** (divide-by-2 circuit), also known as a **dynamic toggle flip-flop (T-FF)** configured in negative feedback:\n\n* **Master Stage:** Formed by the switch controlled by $CK$ and inverter $\\text{Inv}_1$.\n* **Slave Stage:** Formed by the switch controlled by $\\overline{CK}$ and the cascaded inverters $\\text{Inv}_2$ and $\\text{Inv}_3$.\n* **Feedback:** The output of $\\text{Inv}_3$ is fed directly back to the input switch of the master stage.\n* **Storage Mechanism:** It relies on **dynamic logic**, where logic levels are temporarily stored on the parasitic gate capacitances of $\\text{Inv}_1$ and $\\text{Inv}_2$ when their respective switches are open.\n\n---\n\n### 2. Operating Principle\n\nLet:\n* $V_A$ be the voltage at the input of $\\text{Inv}_1$ (after switch $CK$).\n* $V_B$ be the voltage at the output of $\\text{Inv}_1$.\n* $V_C$ be the voltage at the input of $\\text{Inv}_2$ (after switch $\\overline{CK}$).\n* $V_D$ be the voltage at the output of $\\text{Inv}_2$ (input of $\\text{Inv}_3$).\n* $V_{out}$ be the output voltage of $\\text{Inv}_3$.\n\nAssuming complementary, non-overlapping clock signals $CK$ and $\\overline{CK}$:\n\n#### **Phase 1: $CK = \\text{HIGH}$, $\\overline{CK} = \\text{LOW}$ (Master Samples, Slave Holds)**\n1. **Switch $CK$ closes (ON)** and **Switch $\\overline{CK}$ opens (OFF)**.\n2. The current output $V_{out}$ is sampled onto the input gate capacitance of $\\text{Inv}_1$:\n   $$V_A = V_{out}$$\n3. Inverter $\\text{Inv}_1$ inverts this value:\n   $$V_B = \\overline{V_A} = \\overline{V_{out}}$$\n4. Because Switch $\\overline{CK}$ is open, node $C$ is isolated and retains its previously sampled charge dynamically.\n5. Inverters $\\text{Inv}_2$ and $\\text{Inv}_3$ maintain the existing output state $V_{out}$.\n\n#### **Phase 2: $CK = \\text{LOW}$, $\\overline{CK} = \\text{HIGH}$ (Master Holds, Slave Samples)**\n1. **Switch $CK$ opens (OFF)** and **Switch $\\overline{CK}$ closes (ON)**.\n2. Node $A$ is isolated and dynamically holds $V_A$, keeping $V_B = \\overline{V_{out,\\text{prev}}}$.\n3. The voltage $V_B$ is transferred through switch $\\overline{CK}$ onto the input of $\\text{Inv}_2$:\n   $$V_C = V_B = \\overline{V_{out,\\text{prev}}}$$\n4. Inverter $\\text{Inv}_2$ inverts $V_C$, and $\\text{Inv}_3$ inverts it once more (a net non-inverting pair):\n   $$V_{out} = \\overline{\\overline{V_C}} = V_C = \\overline{V_{out,\\text{prev}}}$$\n5. The output toggles to the **complement** of its previous value.\n\n---\n\n### 3. State Sequence Across Clock Cycles\n\n| Clock Cycle | $CK$ | $\\overline{CK}$ | $V_A$ | $V_B$ | $V_C$ | $V_{out}$ | Note |\n|:---:|:---:|:---:|:---:|:---:|:---:|:---:|:---|\n| **0 (Init)** | — | — | — | — | 0 | **0** | Assume initial output is 0 |\n| **Cycle 1** | 1 | 0 | 0 | 1 | 0 (held) | 0 | Master samples $V_{out}=0$ |\n| | 0 | 1 | 0 (held)| 1 | 1 | **1** | Output **toggles to 1** |\n| **Cycle 2** | 1 | 0 | 1 | 0 | 1 (held) | 1 | Master samples $V_{out}=1$ |\n| | 0 | 1 | 1 (held)| 0 | 0 | **0** | Output **toggles to 0** |\n\n* One complete cycle of $V_{out}$ ($0 \\to 1 \\to 0$) requires **two full clock cycles** of $CK$.\n* Therefore, the output frequency is:\n  $$f_{out} = \\frac{f_{CK}}{2}$$\n\n---\n\n### 4. Why Three Inverters?\n\n* A divide-by-2 toggle circuit requires an overall **negative feedback** (an odd number of signal inversions per clock period) equivalent to connecting $\\overline{Q} \\to D$ in a D-flip-flop.\n* **$\\text{Inv}_1$** provides $1$ inversion.\n* **$\\text{Inv}_2$ and $\\text{Inv}_3$** together provide $2$ inversions (acting as a non-inverting buffer for the slave stage).\n* Total inversions around the loop = $3$ (odd), ensuring the signal alternates logic levels on each clock period.\n* *(Note: If only two inverters were used, the loop would have positive feedback, forming a static latch that stores data rather than toggling).*\n\n---\n\n### 5. Practical Non-Idealities & Operating Constraints\n\n1. **Clock Overlap (Race Condition):**\n   * If $CK$ and $\\overline{CK}$ are high simultaneously even for a short duration, both switches conduct at the same time. The circuit temporarily turns into an unclocked **3-stage ring oscillator**, causing spurious oscillation or meta-stability.\n   * **Remedy:** Non-overlapping clocks must be used.\n\n2. **Minimum Operating Frequency ($f_{min}$):**\n   * When a switch is open, the floating nodes ($A$ and $C$) store charge on small MOS gate capacitances.\n   * Due to subthreshold leakage, reverse-biased junction leakage, and gate leakage, the stored charge gradually leaks away.\n   * Therefore, the circuit **cannot operate at arbitrarily low clock frequencies or DC**.\n\n3. **Maximum Operating Frequency ($f_{max}$):**\n   * $f_{max}$ is limited by the time constant $\\tau = R_{on} C_{in}$ (the switch ON-resistance and inverter input capacitance) and the inverter propagation delays ($t_{p}$). \n   * Each half clock period must be sufficiently long to allow the nodes to charge/discharge past the inverter logic thresholds.\n\n4. **Charge Injection and Clock Feedthrough:**\n   * When MOS switches turn off, channel charge injection and capacitive coupling via gate-to-source/drain overlap capacitances ($C_{ov}$) inject error voltages onto the floating storage nodes, potentially causing logic errors if the storage capacitance is too small.",
        "format": "markdown",
        "sha256": "baa4e113f00e719dfdf8583011aa44630753399b24609f77c5007363d24673af"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a divide-by-two built from dynamic latches and explains that the output toggles to produce half the clock frequency. Per the full-credit rule, the detailed internal signal analysis is not required.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 6273,
        "total_tokens": 7373,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4663,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 6273,
        "total_tokens": 7373,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4663,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Overview and Circuit Identification\n\nThe circuit shown in the figure is a **dynamic divide-by-2 frequency divider** (also known as a dynamic toggle flip-flop). \n\nIt is constructed by placing a **dynamic master-slave D-latch** in a closed feedback loop:\n* **Master Stage:** Switch controlled by $CK$ + input capacitance of $\\text{Inv}_1$ + $\\text{Inv}_1$.\n* **Slave Stage:** Switch controlled by $\\overline{CK}$ + input capacitance of $\\text{Inv}_2$ + $\\text{Inv}_2$.\n* **Inversion / Feedback Stage:** $\\text{Inv}_3$ inverts the output of the slave stage to provide negative feedback ($\\overline{Q}$) back to the input of the master stage.\n\nBecause the loop contains an **odd number of inverters (3 inverters)**, the overall signal feedback is inverted ($D = \\overline{Q}$). Driven by complementary clock phases ($CK$ and $\\overline{CK}$), the circuit toggles its state once every clock period, producing an output waveform at **half the clock frequency** ($f_{\\text{out}} = f_{CK} / 2$).\n\n---\n\n### 2. Detailed Principle of Operation\n\nLet us define the internal nodes of the circuit:\n* **Node $A$:** Input to $\\text{Inv}_1$ (after switch $CK$)\n* **Node $B$:** Output of $\\text{Inv}_1$\n* **Node $C$:** Input to $\\text{Inv}_2$ (after switch $\\overline{CK}$)\n* **Node $D$:** Output of $\\text{Inv}_2$ ($Q$)\n* **Node $E$:** Output of $\\text{Inv}_3$ ($\\overline{Q}$)\n\n```\n         CK             Inv1         CK_bar        Inv2           Inv3\n---o/ o---[ A ]----|>o----[ B ]---o/ o---[ C ]----|>o----[ D ]----|>o----[ E ]---\n   |                                                                        |\n   +------------------------------------------------------------------------+\n```\n\n#### **Phase 1: $CK = \\text{HIGH}$, $\\overline{CK} = \\text{LOW}$**\n* **Switch $CK$ is CLOSED (ON); switch $\\overline{CK}$ is OPEN (OFF).**\n* **Slave stage is in HOLD mode:** \n  * Node $C$ is isolated and dynamically holds its previously sampled charge on the gate capacitance of $\\text{Inv}_2$.\n  * Consequently, nodes $D$ and $E$ remain stable at their previous states.\n* **Master stage is in SAMPLE / TRACK mode:**\n  * Node $A$ is driven by node $E$ through the closed switch $CK$:\n    $$V_A = V_E$$\n  * Inverter $\\text{Inv}_1$ evaluates:\n    $$V_B = \\overline{V_A} = \\overline{V_E}$$\n\n---\n\n#### **Phase 2: $CK = \\text{LOW}$, $\\overline{CK} = \\text{HIGH}$**\n* **Switch $CK$ is OPEN (OFF); switch $\\overline{CK}$ is CLOSED (ON).**\n* **Master stage is in HOLD mode:**\n  * Node $A$ is isolated and floats, dynamically storing its voltage on the input gate capacitance of $\\text{Inv}_1$.\n  * Node $B$ remains stable at $\\overline{V_A}$.\n* **Slave stage is in SAMPLE / TRACK mode:**\n  * The voltage at node $B$ is transferred through switch $\\overline{CK}$ to node $C$:\n    $$V_C = V_B$$\n  * Node $D$ and node $E$ evaluate sequentially:\n    $$V_D = \\overline{V_C} = \\overline{V_B} = V_A = V_E^{\\text{old}}$$\n    $$V_E = \\overline{V_D} = \\overline{V_E^{\\text{old}}}$$\n  * Thus, **the output at node $E$ toggles to the complement of its previous value.**\n  * Because switch $CK$ is OPEN, this new value at $E$ does not disturb node $A$.\n\n---\n\n### 3. State Sequence Across Clock Cycles\n\nAssuming the circuit starts with $V_E = 0$ (LOW):\n\n| Clock Period | Clock State ($CK$) | Switch $CK$ | Switch $\\overline{CK}$ | Node $A$ | Node $B$ | Node $C$ | Node $D$ ($Q$) | Node $E$ ($\\overline{Q}$) |\n|:---:|:---:|:---:|:---:|:---:|:---:|:---:|:---:|:---:|\n| **Cycle 1** | HIGH | ON | OFF | $0$ | $1$ | held | held | $0$ |\n| | LOW | OFF | ON | held ($0$) | $1$ | $1$ | $0$ | **$1$** |\n| **Cycle 2** | HIGH | ON | OFF | $1$ | $0$ | held | held | $1$ |\n| | LOW | OFF | ON | held ($1$) | $0$ | $0$ | $1$ | **$0$** |\n\n* After **1 full clock cycle** ($CK$ going High $\\to$ Low $\\to$ High), node $E$ transitions from $0 \\to 1$.\n* After **2 full clock cycles**, node $E$ transitions from $1 \\to 0$ (completing one full cycle).\n* Therefore:\n  $$T_{\\text{out}} = 2 \\cdot T_{CK} \\implies f_{\\text{out}} = \\frac{f_{CK}}{2}$$\n\n---\n\n### 4. Practical Design Considerations & Limitations\n\n1. **Minimum Operating Frequency ($f_{\\min}$):**\n   * Nodes $A$ and $C$ are dynamic storage nodes that float during their respective hold phases.\n   * Parasitic leakage currents (subthreshold leakage and reverse-biased junction leakage of the switch transistors) discharge these nodes over time.\n   * If the clock frequency is too low, the charge leaks away before the next phase, causing logic errors. Hence, the circuit has a strict **minimum clock frequency** ($f_{CK} > f_{\\min}$).\n\n2. **Maximum Operating Frequency ($f_{\\max}$):**\n   * The maximum frequency is bounded by the RC time constants of the switches and the propagation delays of the inverters:\n     * During $CK = 1$: Node $A$ must settle through switch $CK$, and $\\text{Inv}_1$ must evaluate.\n     * During $\\overline{CK} = 1$: Node $C$ must settle through switch $\\overline{CK}$, and both $\\text{Inv}_2$ and $\\text{Inv}_3$ must evaluate.\n   * If the half-period of the clock is shorter than these combined delays, incomplete voltage swings will occur, causing the divider to fail.\n\n3. **Clock Overlap (Risk of Ring Oscillation):**\n   * If the clocks $CK$ and $\\overline{CK}$ overlap (i.e., both are HIGH simultaneously for a short window), **both switches conduct at the same time**.\n   * Under this condition, the circuit forms a closed feedback loop with **three inverters in series**.\n   * Because a 3-inverter loop with gain $> 1$ satisfies the Barkhausen criterion, it acts as an uncontrolled **3-stage ring oscillator**, causing race conditions and state corruption.\n   * To prevent this, strictly **non-overlapping clock phases** must be used.",
        "format": "markdown",
        "sha256": "e623ae56ee3c46a746296f96fe5a9bfbbfb6d19548e0d5d04b4fb778ab459025"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic divide-by-two and gives the essential half-frequency behavior. The additional implementation details are not required for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 7501,
        "total_tokens": 8601,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5823,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 7501,
        "total_tokens": 8601,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5823,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **dynamic frequency divider** (specifically, a **divide-by-2 circuit**) configured as a **toggle flip-flop (T-FF)** using dynamic logic. \n\n---\n\n### 1. Circuit Structure\nThe circuit consists of:\n* **Master Stage:** Switch controlled by $CK$ followed by one inverter ($\\text{Inv}_1$), which acts as an **inverting latch**.\n* **Slave Stage:** Switch controlled by $\\overline{CK}$ followed by two inverters in cascade, which acts as a **non-inverting latch**.\n* **Feedback Loop:** The output of the third inverter is fed back to the input switch of the master stage.\n\nBecause the total loop contains **three inverters** (an odd number), the overall feedback is **negative** (i.e., equivalent to connecting $\\overline{Q}$ back to the $D$ input of an edge-triggered D flip-flop: $D = \\overline{Q}$).\n\n---\n\n### 2. Principle of Operation\n\nThe circuit relies on the **input gate capacitances** of the inverters to dynamically store logic levels when the corresponding switches are open.\n\nLet $V_{\\text{out}}$ be the output of the third inverter. Assume initially that $V_{\\text{out}} = 0$ (LOW).\n\n#### **Cycle 1:**\n1. **Phase 1 ($CK = 1$, $\\overline{CK} = 0$):**\n   * **Switch $CK$ is CLOSED; Switch $\\overline{CK}$ is OPEN.**\n   * The master stage samples the output $V_{\\text{out}} = 0$.\n   * The output of $\\text{Inv}_1$ becomes **$1$ (HIGH)**.\n   * Because switch $\\overline{CK}$ is open, the input of the second inverter floats and holds its previous state dynamically on its parasitic gate capacitance. The output remains $V_{\\text{out}} = 0$.\n\n2. **Phase 2 ($CK = 0$, $\\overline{CK} = 1$):**\n   * **Switch $CK$ is OPEN; Switch $\\overline{CK}$ is CLOSED.**\n   * The input of $\\text{Inv}_1$ is isolated and holds its charge dynamically, keeping the output of $\\text{Inv}_1$ at **$1$**.\n   * The HIGH level passes through switch $\\overline{CK}$ to the second inverter.\n   * The second inverter outputs $0$, and the third inverter outputs **$1$**.\n   * Thus, the output toggles: **$V_{\\text{out}} \\to 1$**.\n\n---\n\n#### **Cycle 2:**\n3. **Phase 3 ($CK = 1$, $\\overline{CK} = 0$):**\n   * **Switch $CK$ is CLOSED; Switch $\\overline{CK}$ is OPEN.**\n   * The master stage now samples the new output $V_{\\text{out}} = 1$.\n   * The output of $\\text{Inv}_1$ becomes **$0$ (LOW)**.\n   * Switch $\\overline{CK}$ is open, so the output remains held at **$V_{\\text{out}} = 1$**.\n\n4. **Phase 4 ($CK = 0$, $\\overline{CK} = 1$):**\n   * **Switch $CK$ is OPEN; Switch $\\overline{CK}$ is CLOSED.**\n   * The LOW level at the output of $\\text{Inv}_1$ is transferred to the second inverter.\n   * The second inverter outputs $1$, and the third inverter outputs **$0$**.\n   * The output toggles back: **$V_{\\text{out}} \\to 0$**.\n\n---\n\n### 3. Summary of Functionality\n* The output toggles its state once per full clock cycle of $CK$.\n* Completing a full cycle at the output ($0 \\to 1 \\to 0$) requires **two clock periods**.\n* Therefore, the output frequency is half the input clock frequency:\n  $$f_{\\text{out}} = \\frac{1}{2} f_{CK}$$\n\n---\n\n### 4. Practical Design Considerations\n\n1. **Minimum Operating Frequency ($f_{\\text{min}}$):**\n   * Because logic states are stored on the small parasitic input gate capacitances when the switches are open, leakage currents (subthreshold and junction leakage) will discharge the nodes over time. Therefore, the circuit **cannot operate down to DC** and has a lower operating frequency limit.\n\n2. **Clock Overlap (Race Condition):**\n   * If $CK$ and $\\overline{CK}$ are simultaneously HIGH (overlap), both switches close at the same time. The circuit then becomes a standard **3-stage ring oscillator**, resulting in uncontrolled oscillation or race-through. \n   * To ensure reliable operation, non-overlapping clock phases must be used.",
        "format": "markdown",
        "sha256": "d061f68be7fce659560683a678ae59271c1b3a197d1efe2a364fa48424343cb3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a divide-by-two circuit built from dynamic latches and explains that the output toggles at half the clock frequency, satisfying the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 4940,
        "total_tokens": 6040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3891,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 4940,
        "total_tokens": 6040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3891,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand how the red inverter affects the circuit's performance, let us first analyze the **intended operation of the original circuit** (without the red inverter) and then examine the **consequences of adding the red inverter**.\n\n---\n\n### 1. Operation of the Original Circuit (Divide-by-2 Divider)\nWithout the red inverter, the circuit is a classic **dynamic frequency divider (divide-by-2)** using a master-slave latch topology:\n- **Master stage:** Switch $CK$ and $\\text{Inv}_1$.\n- **Slave stage:** Switch $\\overline{CK}$, the middle inverter ($\\text{Inv}_2$), and the output inverter ($\\text{Inv}_3$).\n- **Feedback:** The output of $\\text{Inv}_3$ is fed back to the input of switch $CK$. Because there are 3 inverters in total (an odd number of inversions), the signal inverts after every full clock period, causing the output to toggle at half the input clock frequency ($f_{out} = f_{in} / 2$).\n\nThe circuit relies fundamentally on **master-slave isolation**:\n1. When **$CK = 1$ ($\\overline{CK} = 0$)**: The master stage samples the state from $\\text{Inv}_3$, while the slave switch $\\overline{CK}$ is open to prevent the signal from propagating through the rest of the loop.\n2. When **$CK = 0$ ($\\overline{CK} = 1$)**: The master switch $CK$ opens (holding its state dynamically on the input capacitance of $\\text{Inv}_1$), while switch $\\overline{CK}$ closes, allowing the new state to propagate through $\\text{Inv}_2$ and $\\text{Inv}_3$. Because switch $CK$ is open, this new value cannot wrap around and corrupt the input of $\\text{Inv}_1$.\n\n---\n\n### 2. Effect of Adding the Red Inverter\n\nThe red inverter connects directly from the output of $\\text{Inv}_3$ to the output of $\\text{Inv}_1$, **completely bypassing the clock switch $CK$**.\n\n#### A. When $CK = 1$ and $\\overline{CK} = 0$ (Master Transparent, Slave Opaque)\n- Both switch $CK$ and the red inverter take their input from the output of $\\text{Inv}_3$ and drive the input node of switch $\\overline{CK}$.\n- The red inverter acts **in parallel** with ($\\text{Switch } CK + \\text{Inv}_1$).\n- **Effect:** It increases the driving capability (effective $G_m$) at the output node of $\\text{Inv}_1$ and bypasses the $R_{on}$ delay of switch $CK$, slightly speeding up the transition of that node during this phase.\n\n#### B. When $CK = 0$ and $\\overline{CK} = 1$ (The Critical Problem: Race Condition & Oscillation)\n- In the original circuit, switch $CK$ opens to prevent feedback from racing through the loop. \n- However, the red inverter **has no switch in series with it** and remains permanently active.\n- When $\\overline{CK} = 1$, switch $\\overline{CK}$ closes. This creates a continuous, uninterrupted closed loop consisting of:\n  $$\\text{Red Inverter} \\longrightarrow \\text{Switch } \\overline{CK} \\longrightarrow \\text{Inv}_2 \\longrightarrow \\text{Inv}_3 \\longrightarrow \\text{Red Inverter}$$\n- **3-Stage Ring Oscillator:** This closed path contains exactly **three inverting stages** and no open switches. Consequently, during the $\\overline{CK} = 1$ half-cycle, the circuit turns into a free-running **ring oscillator**!\n- **Race Condition:** The output races back to the input within the same clock half-cycle, causing the nodes to toggle uncontrollably rather than holding their state.\n\n#### C. Contention (Crowbar Current)\n- During $CK = 0$, the input gate capacitance of $\\text{Inv}_1$ holds the previous state dynamically, so $\\text{Inv}_1$ attempts to maintain the *old* logic level at its output.\n- Meanwhile, as the loop updates, the red inverter attempts to force the *new* logic level onto the same node.\n- This causes **direct contention** between $\\text{Inv}_1$ and the red inverter, resulting in large short-circuit current, degraded logic levels, and high power dissipation.\n\n---\n\n### Summary of Performance Impact\n\n1. **Loss of Functionality / Race Condition:** By destroying the master-slave isolation, the divider fails to operate reliably because the circuit undergoes unwanted ring oscillation whenever $\\overline{CK} = 1$.\n2. **Imposition of a Strict Minimum Operating Frequency ($f_{min}$):** \n   - At low or moderate frequencies, the circuit completely fails as a divider because the half-period of the clock ($T_{CK}/2$) is longer than the delay of the 3-inverter loop, allowing multiple oscillation cycles during a single clock phase.\n   - It could only potentially function at extremely high frequencies near its oscillation frequency (acting akin to an injection-locked oscillator), but with a very narrow locking range and severe sensitivity to PVT variations.\n3. **Increased Power Dissipation:** Power increases significantly due to contention between the red inverter and $\\text{Inv}_1$, high-frequency parasitic oscillations during $\\overline{CK} = 1$, and added capacitive loading on both nodes.",
        "format": "markdown",
        "sha256": "9bfb840e2813190b74211de2a74df95984192c4ae780a0823a2d11f30d587bc8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the red inverter as a feedforward path bypassing the CK switch and Inv1, improving speed, while its unclocked three-inversion loop can toggle and contend with Inv1 at low clock rates, raising the minimum usable frequency. The stronger ring-oscillation wording does not change the essential conclusion.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 22495,
        "total_tokens": 23574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 22495,
        "total_tokens": 23574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic, the circuit is a **single-ended dynamic master-slave frequency divider (divide-by-2)**:\n\n* **Master stage:** Switch $CK$ + dynamic storage capacitor + inverter $\\text{Inv}_1$.\n* **Slave stage:** Switch $\\overline{CK}$ + dynamic storage capacitor + inverters $\\text{Inv}_2$ and $\\text{Inv}_3$.\n* **Feedback:** The output of $\\text{Inv}_3$ ($V_{out}$) feeds back to the input of switch $CK$. Because there are 3 inverters in the loop (an odd number), the circuit provides negative feedback and toggles state once per clock cycle ($f_{out} = f_{in}/2$).\n\nAdding the **red inverter** in parallel across switch $CK$ and $\\text{Inv}_1$ affects the performance in the following ways:\n\n---\n\n### 1. Causes a Race-Around Condition / Ring Oscillation (Severe Degradation of $f_{min}$)\n* **Formation of an Uncontrolled Loop:** When $\\overline{CK} = 1$ (and $CK = 0$), switch $\\overline{CK}$ is closed while switch $CK$ is open. The red inverter provides an unbroken path from the output back to the slave input:\n  $$\\text{Red Inverter} \\rightarrow \\text{Switch } \\overline{CK} \\rightarrow \\text{Inv}_2 \\rightarrow \\text{Inv}_3 \\rightarrow \\text{Red Inverter}$$\n* **Oscillation:** This path contains **3 inverters** in a closed loop without any open switch to block it, forming a **3-stage ring oscillator**.\n* **Impact on Functionality:** \n  * At low to moderate clock frequencies (where $T_{CK}/2$ is larger than the delay around the 3-inverter loop), the output will **oscillate continuously** during the entire half-period when $\\overline{CK} = 1$ rather than holding the newly latched state.\n  * This breaks the divide-by-2 functionality, drastically **increasing the minimum operating frequency ($f_{min}$)**. The divider can only function (if at all) at extremely high frequencies where the clock half-period is shorter than the loop propagation delay.\n\n---\n\n### 2. Creates Contention (Fighting) and Increases Power Dissipation\n* When $\\overline{CK} = 1$ ($CK = 0$):\n  * The input of $\\text{Inv}_1$ floats and dynamically holds the **old state**, so $\\text{Inv}_1$ attempts to keep the intermediate node at the previous logic level.\n  * Meanwhile, the output $V_{out}$ transitions to the **new state**, which is immediately inverted by the red inverter to drive the intermediate node to the opposite level.\n* **Impact:**\n  * $\\text{Inv}_1$ and the red inverter fight each other (one pulls up while the other pulls down).\n  * This creates a direct current path from $V_{DD}$ to ground, causing **large static/short-circuit power dissipation** and degrading the intermediate voltage levels (deteriorating noise margins).\n\n---\n\n### 3. Impact on Speed / Maximum Frequency ($f_{max}$)\n* **Potential Feedforward Effect during $CK = 1$:** When switch $CK$ is closed, the red inverter bypasses the switch's on-resistance ($R_{on,CK}$) and assists $\\text{Inv}_1$ in driving the intermediate node in parallel. \n* **Net Result:** While intended as a feedforward/speed-up technique to drive the intermediate node faster, in practice, the contention and oscillation during $\\overline{CK}=1$ create severe reliability issues, narrowing the operating frequency range to a small window or causing the circuit to fail entirely.\n\n---\n\n### Summary\nThe red inverter degrades performance by:\n1. **Inducing ring oscillation / race condition** when $\\overline{CK}$ is high, preventing proper divide-by-2 operation at low and moderate clock frequencies.\n2. **Substantially increasing power dissipation** due to current contention between $\\text{Inv}_1$ and the red inverter.\n3. **Severely restricting the operating frequency range** by sharply raising $f_{min}$.",
        "format": "markdown",
        "sha256": "8656d0337a7a731a82084a90345e35a361152995ffc2bafe6b5da1795c45594a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies the red inverter’s feedforward speed-up path and the unclocked regenerative loop that can corrupt division at low clock rates, raising the minimum usable frequency. The added contention and power discussion is somewhat emphatic but does not undermine the central answer.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 22484,
        "total_tokens": 23563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 22484,
        "total_tokens": 23563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **dynamic frequency divider (divide-by-2)** based on a master-slave topology with feedback. \n\nTo understand the effect of the **red inverter**, let's first examine the baseline circuit (black components only) and then see how adding the red inverter alters its behavior.\n\n---\n\n### 1. Baseline Circuit Operation (Without the Red Inverter)\nThe black components form a dynamic toggle flip-flop (frequency divider):\n* **When $CK = 1$ ($\\overline{CK} = 0$):** \n  * Switch $CK$ is closed and switch $\\overline{CK}$ is open.\n  * The master stage ($\\text{Inv}_1$) samples the output of Inverter 3 through switch $CK$, inverting it and driving the intermediate node between $\\text{Inv}_1$ and switch $\\overline{CK}$.\n  * Inverter 2 dynamically holds its previous state on its input gate capacitance.\n* **When $CK = 0$ ($\\overline{CK} = 1$):**\n  * Switch $CK$ opens and switch $\\overline{CK}$ closes.\n  * The value stored at the output of $\\text{Inv}_1$ propagates through switch $\\overline{CK}$, Inverter 2, and Inverter 3, toggling the output.\n  * The new output cannot update $\\text{Inv}_1$ yet because switch $CK$ is open; it must wait for the next $CK = 1$ phase.\n\n---\n\n### 2. How the Red Inverter Affects Performance\n\nThe red inverter connects the output of Inverter 3 directly to the output of $\\text{Inv}_1$, **bypassing switch $CK$**. This introduces several major performance trade-offs:\n\n#### A. Increases the Maximum Operating Frequency ($f_{\\max}$)\n1. **Anticipatory / Pre-charging Action:** \n   * During the $\\overline{CK} = 1$ phase, as soon as the output of Inverter 3 toggles, the red inverter **immediately** senses this change and starts driving the intermediate node toward its *next* required state. \n   * Node evaluation does not have to wait for $CK$ to go high to begin. This drastically cuts the propagation delay required during the $CK = 1$ phase.\n2. **Bypasses Switch $RC$ Delay:** \n   * The red inverter's input is driven directly from the output without passing through the series on-resistance ($R_{\\text{on}}$) of switch $CK$.\n3. **Parallel Drive Strength:** \n   * When $CK = 1$, both $\\text{Inv}_1$ and the red inverter drive the intermediate node in parallel, speeding up the transition.\n\n#### B. Introduces a Non-Zero Minimum Operating Frequency ($f_{\\min}$) / Race Condition\n* When $\\overline{CK} = 1$, the red inverter, Inverter 2, and Inverter 3 form a **closed loop of 3 inverters** (an odd number of inverting stages in feedback):\n  $$\\text{Red Inverter} \\longrightarrow \\text{Inverter 2} \\longrightarrow \\text{Inverter 3} \\longrightarrow \\text{Red Inverter}$$\n* This loop is an **unstable 3-stage ring oscillator**.\n* **At low frequencies:** If the clock period is large, the $\\overline{CK} = 1$ half-cycle lasts much longer than the loop delay ($\\approx t_{d,\\text{red}} + t_{d,\\text{inv2}} + t_{d,\\text{inv3}}$). The circuit will **oscillate/race** repeatedly during a single clock phase, destroying the divide-by-2 function.\n* **At high frequencies:** The clock period is short enough that $\\overline{CK}$ turns off before the signal can complete a second loop, allowing the circuit to toggle cleanly just once per clock cycle (operating similar to an **injection-locked frequency divider**).\n* Therefore, the circuit **cannot operate at low frequencies or DC**; it gains a strict **$f_{\\min}$**.\n\n#### C. Causes Contention and Increases Power Dissipation\n* While $\\overline{CK} = 1$, when the output flips, the red inverter tries to pull the intermediate node to the new state. \n* However, switch $CK$ is open, so the input of $\\text{Inv}_1$ is floating and still stores the *previous* state. $\\text{Inv}_1$ momentarily fights the red inverter at that shared node.\n* This contention creates a temporary crowbar (short-circuit) current from $V_{DD}$ to ground, increasing dynamic power consumption and requiring the red inverter to be sized carefully relative to $\\text{Inv}_1$.\n\n---\n\n### Summary\nThe red inverter transforms the circuit into a pseudo-injection-locked/feedforward divider:\n* **Pros:** Significantly **boosts the maximum operating speed ($f_{\\max}$)** by pre-charging the master output and eliminating switch delay.\n* **Cons:** Introduces a **minimum operating frequency ($f_{\\min}$)** below which the circuit oscillates (race condition), causes brief **contention**, and increases **power consumption**.",
        "format": "markdown",
        "sha256": "343413ca28ae8a21667fd68908c662cd1b46874edd48f308313a04f0a5382654"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the red inverter as a feedforward path that bypasses part of the first latch and improves speed, while the unclocked ring can dominate at low clock rates and raise the minimum usable frequency. Its ring/race description is consistent with the golden solution; extra details do not change the central conclusion.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 24447,
        "total_tokens": 25526,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23332,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 24447,
        "total_tokens": 25526,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23332,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, this answer is completely incorrect.** \n\nHere is a detailed breakdown of why the answer is wrong, followed by the actual role and effect of the red inverter.\n\n---\n\n### 1. Why the Quoted Answer is Wrong\n\n1. **Direction of the Inverter (Parallel, Not Anti-Parallel):**\n   * A cross-coupled latch requires two inverters connected in **anti-parallel** (back-to-back), where the output of each inverter drives the input of the other, providing positive feedback ($A \\to B$ and $B \\to A$).\n   * In this schematic, the red inverter points in the **same direction** as $\\text{Inv}_1$ (left-to-right). Both inverters drive the same node; they do not cross-couple.\n\n2. **Wrong Node Connections (Cannot Act as a Keeper):**\n   * To act as a keeper, an inverter must drive the **floating dynamic storage node** (the gate of $\\text{Inv}_1$, located *after* switch $CK$) to replenish charge lost to subthreshold leakage.\n   * Here, the input of the red inverter is connected **before** switch $CK$. When switch $CK$ opens, the gate of $\\text{Inv}_1$ is completely isolated from the red inverter. Thus, it does nothing to prevent leakage at the input of $\\text{Inv}_1$.\n\n3. **Odd Number of Inversions (Oscillation, Not Latching):**\n   * A bistable latch requires an **even** number of inversions in a loop (positive feedback). \n   * As shown below, the red inverter creates a loop with 3 inverters (an **odd** number), which produces negative feedback and oscillation rather than a stable latching state.\n\n---\n\n### 2. What the Circuit Actually Is\n\nWithout the red inverter:\n* The circuit is a classic **dynamic divide-by-2 frequency divider** (a toggle flip-flop formed by a master stage and a slave stage in a negative feedback loop).\n* **Master stage ($CK = 1$):** Switch $CK$ closes and samples the feedback signal; $\\text{Inv}_1$ inverts it.\n* **Slave stage ($CK = 0, \\overline{CK} = 1$):** Switch $CK$ opens (holding charge dynamically on the input gate of $\\text{Inv}_1$), and switch $\\overline{CK}$ closes. The signal passes through $\\text{Inv}_2$ and $\\text{Inv}_3$ (a non-inverting buffer), updating the feedback node with the inverted state.\n* Over each full clock period, the signal inverts, halving the input clock frequency ($f_{\\text{out}} = f_{CK}/2$).\n\n---\n\n### 3. Actual Role and Effect of the Red Inverter\n\nAdding the red inverter as drawn completely breaks the circuit:\n\n1. **Bypasses the Master Switch ($CK$):**\n   * The red inverter creates a permanently transparent inverting path directly from the feedback line to the intermediate node, bypassing the sampling switch $CK$.\n\n2. **Forms a 3-Stage Ring Oscillator during $\\overline{CK} = 1$:**\n   * When $\\overline{CK} = 1$, switch $\\overline{CK}$ is closed.\n   * Tracing the path: $\\text{Red Inverter} \\to \\text{Inv}_2 \\to \\text{Inv}_3 \\to \\text{Red Inverter}$.\n   * This forms a closed loop of **three inverters** with no open switch to interrupt it. Because it has an odd number of inversions and loop gain $> 1$, it acts as an **unconstrained ring oscillator**, causing the circuit to oscillate at high frequency rather than holding/transferring a state.\n\n3. **Driver Contention:**\n   * When $CK = 0$ and $\\overline{CK} = 1$, $\\text{Inv}_1$ is trying to output the state held on its floating input capacitance, while the red inverter is actively driving that exact same node with the inverted feedback signal. This creates severe driver contention, high static power dissipation, and degraded/undefined logic levels.\n\n4. **Destroys Divider Functionality:**\n   * The circuit completely loses its master-slave isolation (race-through condition) and fails to function as a frequency divider.\n\n---\n\n### How a True Keeper Should Look\nIf the goal was indeed to eliminate the minimum clock frequency limitation:\n* A **weak keeper inverter** should be placed with its input at the **output of $\\text{Inv}_1$** and its output connected to the **input of $\\text{Inv}_1$** (*after* switch $CK$).\n* Ideally, it should be clocked (a tri-state inverter enabled by $\\overline{CK}$) so it only activates when $CK$ is low, avoiding contention when switch $CK$ is writing a new value.",
        "format": "markdown",
        "sha256": "a945a82397a1b8c1444ca5b693fc6b7d07a122624a1901f539be4a8452f53dc9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and recognizes the bypassing feedforward path, loop, and contention. But it wrongly claims the circuit is completely broken and oscillates at high clock rates, missing the key tradeoff: the branch can help at high rates but corrupts division at low rates, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 12665,
        "total_tokens": 13791,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 12665,
        "total_tokens": 13791,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, this answer is completely incorrect.** \n\n---\n\n### 1. Why the quoted answer is wrong\n\n1. **It is not cross-coupled (wrong direction):**\n   * A cross-coupled latch requires two inverters connected **back-to-back in anti-parallel** (the output of each inverter drives the input of the other) to provide positive feedback.\n   * Here, the red inverter points in the **same forward direction** (left-to-right) as $\\text{Inv}_1$. Two inverters connected in parallel facing the same way do not form a latch.\n\n2. **It does not act as a keeper (wrong nodes):**\n   * A keeper’s job is to prevent a dynamic node from floating by holding its charge against leakage.\n   * In this circuit, the floating dynamic node when $CK = 0$ is the **input of $\\text{Inv}_1$** (between switch $CK$ and $\\text{Inv}_1$).\n   * The red inverter’s input connects **before** switch $CK$, and its output connects **after** $\\text{Inv}_1$. It has no connection to the floating input node of $\\text{Inv}_1$.\n   * Therefore, the input of $\\text{Inv}_1$ still floats when $CK = 0$, leakage will still degrade the stored charge, and the minimum clock frequency requirement is **not** removed.\n\n---\n\n### 2. What the actual role / effect of the red inverter is\n\n#### Context: The original circuit (without the red inverter)\nWithout the red inverter, this circuit is a standard **dynamic master-slave divide-by-2 circuit (T flip-flop)**:\n* **Master stage:** Switch $CK$ + input capacitance of $\\text{Inv}_1$ + $\\text{Inv}_1$.\n* **Slave stage:** Switch $\\overline{CK}$ + input capacitance of $\\text{Inv}_2$ + $\\text{Inv}_2$ + $\\text{Inv}_3$.\n* The output of $\\text{Inv}_3$ feeds the inverted state back to switch $CK$. Because there are 3 inverting stages in total, the circuit toggles its output every clock cycle.\n\n---\n\n#### With the red inverter added:\nThe red inverter creates an **unclocked feedforward / bypass path** around the master switch $CK$ and $\\text{Inv}_1$. \n\nAnalyzing the two clock phases reveals what actually happens:\n\n1. **When $CK = 1$ ($\\overline{CK} = 0$):**\n   * Switch $CK$ is closed; switch $\\overline{CK}$ is open.\n   * Both the red inverter and $\\text{Inv}_1$ receive the feedback signal from $\\text{Inv}_3$ and invert it to drive the node between $\\text{Inv}_1$ and switch $\\overline{CK}$.\n   * In this phase, the red inverter merely acts redundantly in parallel with $\\text{Inv}_1$.\n\n2. **When $CK = 0$ ($\\overline{CK} = 1$):**\n   * Switch $CK$ opens, and switch $\\overline{CK}$ closes.\n   * The open switch $CK$ is supposed to isolate the feedback loop to prevent race-around.\n   * However, the red inverter **completely bypasses switch $CK$**.\n   * With switch $\\overline{CK}$ closed, an unbroken closed loop is formed:\n     $$\\text{Red Inverter} \\xrightarrow{\\text{through } \\overline{CK}} \\text{Inv}_2 \\to \\text{Inv}_3 \\to \\text{Red Inverter}$$\n   * This forms an active loop of **three inverters** with an overall inversion and **no open switch** to stop signal propagation.\n   * As a result, the circuit turns into a **free-running 3-stage ring oscillator** whenever $CK = 0$.\n   * Additionally, there is severe **logic contention** at the output of $\\text{Inv}_1$ between $\\text{Inv}_1$ (holding the old state dynamically) and the red inverter (driving the oscillating feedback signal), resulting in short-circuit current and undefined logic levels.\n\n---\n\n### Summary\nThe red inverter does **not** make the circuit static. Instead, it bypasses the master clock gating, destroying the master-slave isolation and causing the circuit to **oscillate uncontrollably (race-around)** during the $CK = 0$ phase.\n\n*(To actually make $\\text{Inv}_1$ a static latch, a weak keeper inverter would have to point **backwards**—with its input connected to the output of $\\text{Inv}_1$ and its output connected to the input of $\\text{Inv}_1$, after switch $CK$.)*",
        "format": "markdown",
        "sha256": "ae71f5092da684551f7c690cd616325caddedbf16aa54a56e97b4fc622bae173"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as an unclocked feedforward bypass that can form a loop. But it overstates this as an uncontrollable oscillator whenever CK=0 and misses the key tradeoff: the bypass can improve high-speed operation, while causing corruption at low clock rates and raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 17991,
        "total_tokens": 19117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16965,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 17991,
        "total_tokens": 19117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16965,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I do not agree with this answer.** \n\nThe proposed explanation is completely incorrect. Below is a detailed breakdown of why the answer is wrong and what the red inverter actually does.\n\n---\n\n### 1. Why the Quoted Answer Is Incorrect\n\n1. **It does not form a cross-coupled latch:**\n   * A cross-coupled latch requires two inverters connected **anti-parallel** (back-to-back in opposite directions, forming a 2-inverter positive feedback loop).\n   * Here, both $\\text{Inv}_1$ and the red inverter point in the **same forward direction** (from left to right). Two inverters in parallel cannot form a latch.\n\n2. **It is connected to the wrong node to act as a keeper:**\n   * A keeper must drive the internal floating storage node (the input of $\\text{Inv}_1$, *after* switch $CK$) to hold its voltage against leakage when switch $CK$ turns off.\n   * The input of the red inverter is connected **before** switch $CK$ (to the output of the third inverter). When switch $CK$ opens, the input of $\\text{Inv}_1$ is left completely floating.\n   * Therefore, it **does not mitigate charge leakage**, and the minimum clock frequency requirement is not removed.\n\n---\n\n### 2. The Actual Role and Effect of the Red Inverter\n\nThe red inverter acts as an **unswitched feedforward / bypass path** around switch $CK$ and $\\text{Inv}_1$. Instead of improving the circuit, it completely breaks its functionality as a master-slave divide-by-2 counter:\n\n* **When $CK = 1$ ($\\overline{CK} = 0$):**\n  * Switch $CK$ is closed and switch $\\overline{CK}$ is open.\n  * Both $\\text{Inv}_1$ and the red inverter receive the same signal from the output of the third inverter and drive the intermediate node in parallel. In this phase, the red inverter is merely a redundant parallel driver.\n\n* **When $CK = 0$ ($\\overline{CK} = 1$):**\n  * Switch $CK$ is open, intended to isolate the master stage so the slave stage can hold and propagate the sampled state.\n  * However, because the red inverter bypasses switch $CK$, it continues to drive the intermediate node directly from the output of the third inverter.\n  * With switch $\\overline{CK}$ closed, this creates an active closed loop consisting of **three inverters in series**:\n    $$\\text{Red Inverter} \\longrightarrow \\text{Inverter}_2 \\longrightarrow \\text{Inverter}_3 \\longrightarrow \\text{Red Inverter}$$\n  * An odd number (3) of inverters in a closed loop forms a **ring oscillator**. \n\n### Summary\nThe red inverter does not act as a keeper. Instead, it bypasses the master sampling switch, destroying master-slave isolation and turning the circuit into an unstable **3-stage ring oscillator** whenever $CK = 0$.",
        "format": "markdown",
        "sha256": "d9ea76b80b91b5dc892bdb9e31517c21d8a3bee8057124b10a9849137349ae11"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the unswitched feedforward path and possible three-inverter loop. However, it overstates that the circuit is always destroyed and misses the key tradeoff: the branch can speed high-frequency operation, but can overpower the latch at low frequencies, raising the minimum usable clock rate.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 16595,
        "total_tokens": 17721,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15941,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 16595,
        "total_tokens": 17721,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15941,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is an **inverter-based low-noise amplifier (LNA) with resistive shunt feedback ($R_F$)**. It uses complementary transistors ($M_1$ NMOS and $M_2$ PMOS) sharing the same bias current (current reuse) to boost total transconductance while providing self-biasing through $R_F$.\n\nBelow is the step-by-step analysis and optimization procedure to minimize the **Noise Figure (NF)** while keeping $R_{\\text{in}} = 50\\,\\Omega$.\n\n---\n\n### 1. Input Impedance ($R_{\\text{in}}$) Analysis\n\nLet:\n* $G_m = g_{m1} + g_{m2}$ (total transconductance of the inverter)\n* $r_o = r_{o1} \\parallel r_{o2}$ (open-loop output resistance)\n* Open-loop voltage gain: $A_v = -G_m r_o$\n\nAssuming the coupling capacitor $C_1$ acts as an AC short at the operating frequency ($1/(\\omega C_1) \\ll 50\\,\\Omega$), the small-signal input impedance looking into the node is:\n$$R_{\\text{in}} = \\frac{R_F + r_o}{1 + G_m r_o} \\approx \\frac{R_F}{1 + |A_v|} + \\frac{1}{G_m}$$\n\nFor a target input match of $R_{\\text{in}} = R_S = 50\\,\\Omega$:\n$$R_F = R_S + r_o(G_m R_S - 1)$$\n\n---\n\n### 2. Noise Figure (NF) Derivation\n\nThe circuit has three primary noise sources:\n1. **Source resistance thermal noise:** $\\overline{v_{n,RS}^2} = 4kTR_S$\n2. **Feedback resistor thermal noise:** $\\overline{i_{n,RF}^2} = \\frac{4kT}{R_F}$\n3. **Transistors' channel thermal noise:** $\\overline{i_{n,M}^2} = 4kT\\gamma(g_{m1} + g_{m2}) = 4kT\\gamma G_m$ (where $\\gamma$ is the excess noise coefficient, $\\approx 2/3$ for long-channel, $>1$ for short-channel devices).\n\nReferred to the input, the noise factor $F$ under matched conditions ($R_{\\text{in}} = R_S$) is approximately:\n$$F \\approx 1 + \\frac{R_S}{R_F}\\left(1 + \\frac{1}{G_m R_S}\\right)^2 + \\frac{\\gamma}{G_m R_S}$$\n\nWhen the loop gain is reasonably high ($G_m R_S > 1$ and $R_F \\gg R_S$), this simplifies to:\n$$\\boxed{NF \\approx 1 + \\frac{\\gamma}{(g_{m1} + g_{m2})R_S} + \\frac{R_S}{R_F}}$$\n\n---\n\n### 3. Optimization Strategy for Minimum NF\n\nFrom the NF expression, there are two noise-contributing terms to minimize:\n1. **The transistor noise term:** $\\dfrac{\\gamma}{G_m R_S}$\n2. **The feedback resistor noise term:** $\\dfrac{R_S}{R_F}$\n\nTo optimize the NF while maintaining $R_{\\text{in}} = 50\\,\\Omega$:\n\n#### A. Maximize Total Transconductance ($G_m = g_{m1} + g_{m2}$)\n* **Mechanism:** Increasing $G_m$ directly suppresses the transistor channel noise contribution $\\frac{\\gamma}{G_m R_S}$.\n* **Implementation:** Increase the bias current $I_{DD}$ and the transistor aspect ratios $(W/L)_{1,2}$. Because of current reuse, $M_1$ and $M_2$ share the same DC current, yielding double the $g_m$ compared to a single-device stage for the same current.\n\n#### B. Increase $R_F$ Proportionally with Gain\n* **Mechanism:** Increasing $R_F$ directly reduces the noise contribution of the feedback resistor ($\\frac{R_S}{R_F} \\to 0$).\n* **Constraint:** Since $R_{\\text{in}} \\approx \\frac{R_F}{1 + G_m r_o} = 50\\,\\Omega$, as $G_m$ increases, **$R_F$ must be increased proportionally** ($R_F \\approx G_m r_o R_S$) to preserve the $50\\,\\Omega$ input match. \n* Consequently, increasing $G_m$ simultaneously allows for a larger $R_F$, reducing **both** the transistor noise and the resistor noise.\n\n#### C. Maximize Output Resistance ($r_o$)\n* **Mechanism:** Using slightly non-minimum channel lengths ($L > L_{\\min}$) increases the transistor output resistance $r_o = r_{o1} \\parallel r_{o2}$ by reducing channel-length modulation.\n* A larger $r_o$ increases the intrinsic voltage gain $|A_v| = G_m r_o$, which allows an even larger $R_F$ to satisfy $R_{\\text{in}} = 50\\,\\Omega$, further suppressing $R_F$'s noise.\n\n#### D. Device Sizing Ratio for DC Self-Biasing and Maximum Dynamic Range\n* $R_F$ forces $V_{GS} = V_{DS}$ at DC. To maximize the output voltage swing and linearity without clipping, the operating point should be centered at $V_{\\text{out,DC}} \\approx V_{DD}/2$.\n* Choose the aspect ratio ratio to balance the electron and hole mobilities:\n  $$\\frac{(W/L)_2}{(W/L)_1} \\approx \\frac{\\mu_n}{\\mu_p} \\approx 2 \\text{ to } 3$$\n\n#### E. Size the Input Capacitor ($C_1$)\n* Ensure $C_1$ is sufficiently large so that at the minimum operating frequency $\\omega_{\\min}$:\n  $$\\frac{1}{\\omega_{\\min} C_1} \\ll 50\\,\\Omega$$\n  This prevents $C_1$ from adding impedance mismatch or insertion loss, which would degrade the NF directly.\n\n---\n\n### 4. Practical Design Trade-offs\n\n| Parameter to Improve NF | Positive Effect on NF | Trade-off / Penalty |\n| :--- | :--- | :--- |\n| **Increase $I_{DD}$ / $G_m$** | Lowers $\\frac{\\gamma}{G_m R_S}$ | Higher DC power consumption. |\n| **Increase Widths ($W_1, W_2$)** | Lowers $\\frac{\\gamma}{G_m R_S}$ | Increases gate parasitics ($C_{gs}, C_{gd}$). Through Miller multiplication, $C_{\\text{in}} \\approx C_{gs} + (1 + \\|A_v\\|)C_{gd}$ degrades high-frequency input matching ($S_{11}$) and bandwidth. |\n| **Increase $R_F$ (Higher Gain)** | Lowers $\\frac{R_S}{R_F}$ | Higher gain leads to earlier output clipping and degrades linearity ($IIP_3, P_{1\\text{dB}}$). |",
        "format": "markdown",
        "sha256": "2db59cf93d3b53651f66bb3412497555f8eeebdfbd4df258fcd24ccb46b1af62"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer uses the finite-output-resistance input-match relation, correctly explains that gm can exceed 1/Rs while RF is adjusted to keep Rin at 50 Ω, and concludes that NF can fall below 1 + gamma. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 22521,
        "total_tokens": 23638,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20888,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 22521,
        "total_tokens": 23638,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20888,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the **inverter-based shunt-feedback Low-Noise Amplifier (LNA)** for minimum **Noise Figure ($\\text{NF}$)** while maintaining an input resistance $R_{\\text{in}} = 50\\ \\Omega$, we must analyze its input impedance, noise figure, and design trade-offs.\n\n---\n\n### 1. Small-Signal Model and Input Resistance ($R_{\\text{in}}$)\n\nThe inverter consists of NMOS $M_1$ and PMOS $M_2$ operating in parallel for AC small signals:\n- **Total transconductance:** $G_m = g_{m1} + g_{m2}$\n- **Intrinsic output resistance:** $r_O = r_{O1} \\parallel r_{O2}$\n- **Feedback resistor:** $R_F$\n\nAssuming the coupling capacitor $C_1$ acts as a short at the operating frequency, applying a test voltage $V_x$ at the input yields:\n$$R_{\\text{in}} = \\frac{R_F + r_O}{1 + G_m r_O} = \\frac{R_F + (r_{O1} \\parallel r_{O2})}{1 + (g_{m1} + g_{m2})(r_{O1} \\parallel r_{O2})}$$\n\nDepending on the transistor channel-length modulation, two regimes arise:\n1. **Ideal / High-$r_O$ Regime ($r_O \\gg R_F$):**\n   $$R_{\\text{in}} \\approx \\frac{1}{G_m} = \\frac{1}{g_{m1} + g_{m2}}$$\n2. **Practical / Finite-$r_O$ Regime ($A_0 = G_m r_O \\gg 1$):**\n   $$R_{\\text{in}} \\approx \\frac{R_F}{1 + G_m r_O} \\approx \\frac{R_F}{A_0}$$\n\n---\n\n### 2. Noise Figure ($\\text{NF}$) Expression\n\nWhen driven by a source with impedance $R_S = 50\\ \\Omega$ (matched such that $R_{\\text{in}} = R_S$), the noise sources in the circuit are:\n1. Thermal noise of the source resistance $R_S$: $\\overline{v_{n,RS}^2} = 4kTR_S$\n2. Thermal noise of the feedback resistor $R_F$: $\\overline{i_{n,RF}^2} = \\frac{4kT}{R_F}$\n3. Channel thermal noise of $M_1$ and $M_2$: $\\overline{i_{n,M}^2} = 4kT\\gamma_1 g_{m1} + 4kT\\gamma_2 g_{m2} \\approx 4kT\\gamma G_m$\n\nCalculating the total noise at the output and dividing by the gain from $V_S$ gives the Noise Factor $F$:\n$$F \\approx 1 + \\gamma G_m R_S + \\frac{4 R_S}{R_F}$$\n\nAlternatively, expressing it in terms of input-referred noise:\n$$\\text{NF} = 10 \\log_{10} \\left( 1 + \\frac{\\gamma}{G_m R_S} + \\frac{R_S}{R_F} \\right)$$\n\n---\n\n### 3. Optimization Guidelines for Minimum NF\n\nTo minimize the Noise Figure while keeping $R_{\\text{in}} = R_S = 50\\ \\Omega$:\n\n#### 1. Maximize the Feedback Resistor $R_F$\n- The noise contribution of $R_F$ is inversely proportional to its resistance ($\\propto 1/R_F$).\n- Choosing **$R_F \\gg R_S$** minimizes its noise contribution. In the limit $R_F \\to \\infty$, the noise of $R_F$ vanishes, approaching the theoretical lower bound:\n  $$\\text{NF}_{\\min} \\approx 1 + \\gamma$$\n  *(For long-channel devices with $\\gamma \\approx 2/3$, $\\text{NF} \\approx 2.2\\text{ dB}$; for short-channel devices with $\\gamma \\approx 1 \\text{ to } 2$, $\\text{NF} \\approx 3 \\text{ to } 4.8\\text{ dB}$).*\n\n#### 2. Scale $G_m$ to Satisfy the $50\\ \\Omega$ Matching Condition\n- **If $r_O$ is finite:** As $R_F$ is increased to lower the noise, $R_{\\text{in}}$ rises. To keep $R_{\\text{in}} = 50\\ \\Omega$, the open-loop gain $A_v = G_m r_O$ must increase accordingly:\n  $$G_m = \\frac{R_F + r_O - R_S}{r_O R_S}$$\n  Increasing $G_m$ also reduces the input-referred transistor noise contribution ($\\propto \\frac{\\gamma}{G_m R_S}$).\n- **If $r_O \\gg R_F$:** $G_m$ must be held constant at:\n  $$G_m = g_{m1} + g_{m2} = \\frac{1}{50\\ \\Omega} = 20\\text{ mS}$$\n  In this case, the matching is fixed solely by $G_m$, and optimizing the NF relies strictly on maximizing $R_F$.\n\n#### 3. Optimize Transistor Sizing and Current Reuse ($M_1, M_2$)\n- **Current Reuse:** The complementary structure naturally reuses the same DC bias current $I_{DD}$ for both transistors, doubling the effective transconductance ($G_m = g_{m1} + g_{m2}$) for a given current compared to a standard common-source stage.\n- **Sizing for Symmetrical Trip Point:** Because $R_F$ self-biases the inverter with zero DC gate current, the DC input and output settle at the inverter trip point $V_m$. To maximize voltage headroom and linearity:\n  $$V_{\\text{in,DC}} = V_{\\text{out,DC}} = V_m \\approx \\frac{V_{DD}}{2}$$\n  Because electron mobility is higher than hole mobility ($\\mu_n \\approx 2\\text{–}3\\mu_p$), size the PMOS wider than the NMOS:\n  $$\\frac{W_2}{W_1} \\approx \\frac{\\mu_n}{\\mu_p} \\approx 2 \\text{ to } 3$$\n- **Channel Length:** Use minimum channel length ($L_1 = L_2 = L_{\\min}$) to maximize $g_m/I_D$ and minimize parasitic gate capacitances.\n\n---\n\n### 4. Practical Limits and Trade-Offs\n\nWhile increasing $R_F$ and $G_m$ minimizes NF, physical constraints set practical limits:\n1. **Power Dissipation:** Increasing $G_m$ to balance a larger $R_F$ requires higher bias current $I_{DD}$.\n2. **Bandwidth and High-Frequency Input Matching ($S_{11}$):** \n   - A larger $R_F$ together with larger transistor widths increases the input Miller capacitance:\n     $$C_{\\text{in}} \\approx C_{gs1} + C_{gs2} + (1 + |A_v|)(C_{gd1} + C_{gd2})$$\n   - This parasitic capacitance shunts $R_{\\text{in}}$ at high frequencies ($Z_{\\text{in}} = R_{\\text{in}} \\parallel \\frac{1}{j\\omega C_{\\text{in}}}$), degrading $S_{11}$ and RF bandwidth.\n3. **Linearity ($IIP_3$):** Higher gain ($|A_v| \\approx G_m R_F$) increases signal swing at the output drains, lowering the input 1-dB compression point ($P_{\\text{1dB}}$) and $IIP_3$.",
        "format": "markdown",
        "sha256": "826c70e171f4069fe17cabb2e9b55784fc205122444c76530fa8220b8661c00c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the correct finite-output-resistance input-match relation and recommends increasing gm and RF together to maintain 50 Ω. However, its noise-factor expressions conflict, and it incorrectly presents 1 + γ as the general lower bound; with finite ro and gm above 1/Rs, NF can fall below that value.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 26396,
        "total_tokens": 27513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 26396,
        "total_tokens": 27513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the circuit (an **inverter-based low-noise amplifier with shunt resistive feedback**) for minimum Noise Figure ($\\text{NF}$) under the constraint that $R_{\\text{in}} = 50\\,\\Omega$, we analyze the input impedance, derive the noise figure, and determine the design parameters that minimize noise.\n\n---\n\n### 1. Input Resistance Analysis ($R_{\\text{in}}$)\n\nAssuming the output is open-circuit (or drives a high-impedance capacitive load such as a subsequent mixer stage), let us find the input resistance looking into the node after the AC-coupling capacitor $C_1$.\n\nApplying a test voltage $v_x$ at the input node:\n- The small-signal current drawn by the inverter is:\n  $$i_d = (g_{m1} + g_{m2}) v_x = G_m v_x$$\n  where $G_m = g_{m1} + g_{m2}$.\n- The current entering through the feedback resistor is:\n  $$i_x = \\frac{v_x - v_{\\text{out}}}{R_F}$$\n\nBy KCL at the output node (neglecting the channel-length modulation $r_O \\to \\infty$ for now):\n$$\\frac{v_x - v_{\\text{out}}}{R_F} - G_m v_x = 0 \\implies i_x = G_m v_x$$\n\nRemarkably, the current flowing through $R_F$ has nowhere else to go but into the drains of $M_1$ and $M_2$. Therefore:\n$$R_{\\text{in}} = \\frac{v_x}{i_x} = \\frac{1}{g_{m1} + g_{m2}} = \\frac{1}{G_m}$$\n\nTo maintain $R_{\\text{in}} = R_S = 50\\,\\Omega$:\n$$\\mathbf{G_m = g_{m1} + g_{m2} = \\frac{1}{50\\,\\Omega} = 20\\,\\text{mS}}$$\n\n---\n\n### 2. Noise Figure Derivation\n\nThe circuit contains three main noise contributors:\n1. **Source resistance ($R_S = 50\\,\\Omega$):** $\\overline{v_{n,RS}^2} = 4kT R_S$\n2. **Transistors ($M_1, M_2$):** $\\overline{i_{n,M}^2} = 4kT(\\gamma_1 g_{m1} + \\gamma_2 g_{m2}) = 4kT \\gamma G_m$ (assuming $\\gamma_1 \\approx \\gamma_2 = \\gamma$)\n3. **Feedback resistor ($R_F$):** $\\overline{i_{n,RF}^2} = \\frac{4kT}{R_F}$\n\n#### Transfer Functions to the Output:\n- **From Source $v_{n,RS}$:** With $R_{\\text{in}} = R_S$, $v_{\\text{in}} = v_{n,RS}/2$, yielding:\n  $$v_{\\text{out}, RS} = -\\frac{1}{2}\\left(\\frac{R_F - R_S}{R_S}\\right) v_{n,RS}$$\n  $$\\overline{v_{\\text{out}, RS}^2} = 4kT \\frac{(R_F - R_S)^2}{4 R_S}$$\n\n- **From Transistors $i_{n,M}$:**\n  $$v_{\\text{out}, M} = -\\frac{1}{2}(R_F + R_S) i_{n,M}$$\n  $$\\overline{v_{\\text{out}, M}^2} = 4kT \\gamma \\frac{(R_F + R_S)^2}{4 R_S}$$\n\n- **From Feedback Resistor $i_{n,RF}$:**\n  Because the loop enforces $v_{\\text{in}} = 0$ for this noise source when $G_m = 1/R_S$, all noise current passes directly through $R_F$:\n  $$v_{\\text{out}, RF} = -i_{n,RF} R_F$$\n  $$\\overline{v_{\\text{out}, RF}^2} = 4kT R_F$$\n\n#### Total Noise Figure ($\\text{NF}$):\nDividing each output noise contribution by $\\overline{v_{\\text{out}, RS}^2}$:\n$$\\text{NF} = 1 + \\gamma \\left(\\frac{R_F + R_S}{R_F - R_S}\\right)^2 + \\frac{4 R_F R_S}{(R_F - R_S)^2}$$\n\nFor $R_F \\gg R_S$:\n$$\\mathbf{\\text{NF} \\approx 1 + \\gamma + \\frac{4 R_S}{R_F}}$$\n\n---\n\n### 3. Optimization Guidelines for Minimum NF\n\nTo achieve the lowest possible $\\text{NF}$ while keeping $R_{\\text{in}} = 50\\,\\Omega$:\n\n1. **Make $R_F$ as large as possible:**\n   - As seen in the formula, the noise contribution of $R_F$ is inversely proportional to $R_F$ ($\\propto \\frac{4 R_S}{R_F}$).\n   - As $R_F \\to \\infty$, the noise of $R_F$ drops to zero, and the overall noise figure approaches its fundamental lower bound:\n     $$\\text{NF}_{\\min} = 1 + \\gamma$$\n   - *Practical limitation:* $R_F$ cannot be arbitrarily large due to parasitic self-capacitance across $R_F$ (which rolls off high-frequency gain) and output bandwidth constraints set by load capacitance.\n\n2. **Fix Total Transconductance:**\n   - Keep $g_{m1} + g_{m2} = 20\\,\\text{mS}$ to strictly maintain $R_{\\text{in}} = 50\\,\\Omega$.\n\n3. **Distribute $g_{m1}$ and $g_{m2}$ according to excess noise ($\\gamma$):**\n   - If the NMOS and PMOS devices have different noise parameters $\\gamma_n$ and $\\gamma_p$, allocate more of the $20\\,\\text{mS}$ transconductance to the device with the lower $\\gamma$:\n     $$\\overline{i_{n,M}^2} \\propto \\gamma_n g_{m1} + \\gamma_p g_{m2}$$\n   - PMOS devices often exhibit lower hot-carrier effects and slightly lower $\\gamma$ in short-channel regimes, making a larger $g_{m2}$ favorable if bandwidth permits.\n\n4. **Increase Channel Lengths ($L_1, L_2$) Slightly:**\n   - In deep sub-micron processes, velocity saturation and hot electrons cause $\\gamma$ to rise significantly (from the long-channel value of $2/3$ up to $1.5\\text{–}2.5$).\n   - Choosing channel lengths slightly larger than the minimum feature size reduces $\\gamma$ back toward $2/3$, directly lowering the baseline noise $1 + \\gamma$.\n\n5. **Size the Coupling Capacitor $C_1$ Large Enough:**\n   - Ensure the impedance of $C_1$ at the lowest operating frequency is negligible:\n     $$\\frac{1}{\\omega C_1} \\ll 50\\,\\Omega$$\n   - A finite reactance introduces an impedance mismatch and attenuates the input signal, directly degrading the NF.\n\n6. **Account for Finite Output Resistance ($r_O$):**\n   - In practical implementations where $r_O = r_{O1} \\parallel r_{O2}$ is finite:\n     $$R_{\\text{in}} = \\frac{R_F + r_O}{1 + G_m r_O}$$\n   - If $R_F$ is made very large, $R_{\\text{in}} \\approx \\frac{R_F}{G_m r_O}$. To keep $R_{\\text{in}} = 50\\,\\Omega$, increase the intrinsic gain $G_m r_O$ (by increasing transistor lengths $L$) so that a high value of $R_F$ can be accommodated without violating the $50\\,\\Omega$ match.",
        "format": "markdown",
        "sha256": "85740c1015ddaba9ba04fa0c732c005676bc27bffbdf905f67d09ba43a43764c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer fixes gm at 1/Rs and concludes the best NF is 1 + gamma, missing the key result that finite ro permits gm to exceed 1/Rs while RF is adjusted to maintain the match, reducing NF below 1 + gamma. It mentions the finite-ro input-resistance formula but does not apply its optimization consequence.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 26759,
        "total_tokens": 27876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24927,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 26759,
        "total_tokens": 27876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24927,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance of the circuit, we perform a small-signal analysis at low-to-moderate frequencies.\n\n---\n\n### 1. Circuit Operation and Stage Analysis\n\n1. **First Stage ($M_1$):**\n   * Transistor $M_1$ forms a common-source (CS) amplifier with load resistor $R_{D1}$.\n   * An input voltage $v_P$ at node $P$ produces a small-signal voltage at node $X$:\n     $$v_X = -g_{m1} R_{D1} v_P$$\n     *(assuming channel-length modulation $\\lambda = 0$, or replacing $R_{D1}$ with $R_{D1} \\parallel r_{o1}$ if finite $r_o$ is considered).*\n\n2. **Second Stage ($M_2 - M_3$):**\n   * The PMOS differential pair is biased by the ideal tail current source $I_{\\text{SS}}$.\n   * Node $X$ drives the gate of $M_2$, while the gate of $M_3$ is held at ac ground ($V_b$).\n   * The small-signal current of the tail is zero ($i_{d2} + i_{d3} = 0$). With matched PMOS transistors ($g_{m2} = g_{m3}$), the common-source node moves by:\n     $$v_S = \\frac{v_X}{2}$$\n   * The small-signal drain current flowing out of $M_3$ into node $V_{\\text{out}}$ is:\n     $$i_{d3} = g_{m3}(v_S - 0) = \\frac{1}{2} g_{m2} v_X = -\\frac{1}{2} g_{m1} g_{m2} R_{D1} v_P$$\n   * Notice that the gain from node $X$ to $V_{\\text{out}}$ is **non-inverting** ($+ \\frac{1}{2} g_{m2} R_{D2}$), ensuring that the overall gain from node $P$ to $V_{\\text{out}}$ is **inverting** (negative), which provides stable negative feedback via $R_F$.\n\n---\n\n### 2. Derivation of the Input Resistance $R_{\\text{in}}$\n\nTo find the input resistance looking into node $P$ (as indicated by the arrow labeled $R_{\\text{in}}$):\n\n1. Apply a test voltage $v_t$ at node $P$, which injects a current $i_t$ into node $P$.\n2. Since the gate of $M_1$ draws zero current at low frequencies, all of $i_t$ flows through the feedback resistor $R_F$:\n   $$i_t = \\frac{v_t - v_{\\text{out}}}{R_F} \\implies v_t - v_{\\text{out}} = R_F i_t \\quad \\text{--- (Eq. 1)}$$\n\n3. Apply Kirchhoff's Current Law (KCL) at node $V_{\\text{out}}$:\n   $$\\sum I_{\\text{in}} = \\sum I_{\\text{out}}$$\n   $$i_{d3} + i_t = \\frac{v_{\\text{out}}}{R_{D2}}$$\n\n4. Substitute $i_{d3} = -\\frac{1}{2} g_{m1} g_{m2} R_{D1} v_t$:\n   $$-\\frac{1}{2} g_{m1} g_{m2} R_{D1} v_t + i_t = \\frac{v_{\\text{out}}}{R_{D2}}$$\n   $$v_{\\text{out}} = R_{D2} i_t - \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} v_t \\quad \\text{--- (Eq. 2)}$$\n\n5. Substitute Eq. 2 into Eq. 1:\n   $$v_t - \\left( R_{D2} i_t - \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} v_t \\right) = R_F i_t$$\n   $$v_t \\left( 1 + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} \\right) = (R_F + R_{D2}) i_t$$\n\n6. Solving for $R_{\\text{in}} = \\frac{v_t}{i_t}$:\n   $$\\mathbf{R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2}}}$$\n\n---\n\n### 3. Physical Insights & Special Cases\n\n* **Open-Loop Gain:** The open-loop voltage gain of the two-stage amplifier is:\n  $$A_0 = \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2}$$\n  Thus:\n  $$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + A_0}$$\n* **Miller Approximation:** If $A_0 \\gg 1$ and $R_F \\gg R_{D2}$:\n  $$R_{\\text{in}} \\approx \\frac{R_F}{A_0} = \\frac{R_F}{\\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2}}$$\n* **Inactive Transistors ($g_{m1} = 0$):** If the amplifier is off, the circuit passively looks like $R_F$ in series with $R_{D2}$:\n  $$R_{\\text{in}} = R_F + R_{D2}$$\n\n---\n\n### 4. Total Input Impedance $Z_{\\text{in}}(s)$\n\nTaking into account the input capacitance $C_{\\text{in}}$ connected between node $P$ and ground, the total input impedance seen by the input current source $I_{\\text{in}}$ is:\n\n$$Z_{\\text{in}}(s) = R_{\\text{in}} \\parallel \\frac{1}{s C_{\\text{in}}} = \\frac{R_{\\text{in}}}{1 + s R_{\\text{in}} C_{\\text{in}}}$$\n\nSubstituting $R_{\\text{in}}$:\n$$Z_{\\text{in}}(s) = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} + s C_{\\text{in}} (R_F + R_{D2})}$$",
        "format": "markdown",
        "sha256": "6d8870b7670cc105ff6ff9a73ae5f6cce1df7fc22829a8935fddb7cd77c0b67d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact input resistance, including the output-side resistance: Rin = (RF + RD2)/(1 + A0), with the correct two-stage gain A0 = ½ gm1 gm2 RD1 RD2. The extra capacitance discussion is not needed but does not alter the correct result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 15139,
        "total_tokens": 16243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13604,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 15139,
        "total_tokens": 16243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13604,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance of the given transimpedance amplifier (TIA) circuit, we perform a small-signal analysis. \n\n---\n\n### 1. Small-Signal Analysis of the Forward Path\n\nLet a small-signal test voltage $V_P$ be applied at node $P$. We assume channel-length modulation is neglected ($\\lambda = 0$) unless specified, and the differential pair transistors $M_2$ and $M_3$ are matched ($g_{m2} = g_{m3}$).\n\n1. **First Stage (Common-Source $M_1$):**\n   The gate of $M_1$ is at $V_P$, and its source is grounded. The small-signal drain current of $M_1$ is $g_{m1} V_P$. Since the gate of $M_2$ draws no current, this current flows entirely through $R_{D1}$:\n   $$V_X = -g_{m1} R_{D1} V_P$$\n\n2. **Second Stage (PMOS Differential Pair $M_2\\text{--}M_3$):**\n   - The tail current source $I_{SS}$ is ideal, so its small-signal impedance is infinite ($i_{SS} = 0$).\n   - The gate of $M_2$ is driven by $V_X$, while the gate of $M_3$ is held at AC ground ($V_b = 0$).\n   - Denoting the common source node of $M_2$ and $M_3$ as $S$, by KCL at node $S$:\n     $$g_{m2}(v_S - V_X) + g_{m3}(v_S - 0) = 0$$\n     $$v_S = \\frac{g_{m2}}{g_{m2} + g_{m3}} V_X = \\frac{1}{2} V_X$$\n   - The small-signal current flowing from the source to the drain of $M_3$ (into node $V_{\\text{out}}$) is:\n     $$i_{d3} = g_{m3}(v_S - 0) = \\frac{1}{2} g_{m2} V_X$$\n     Substituting $V_X = -g_{m1} R_{D1} V_P$:\n     $$i_{d3} = -\\frac{1}{2} g_{m1} g_{m2} R_{D1} V_P$$\n\n---\n\n### 2. KCL at Output Node $V_{\\text{out}}$ and Calculation of $R_{\\text{in}}$\n\nLet $I_{\\text{test}}$ be the current flowing into node $P$. Since the gate of $M_1$ draws zero gate current, all of $I_{\\text{test}}$ flows through the feedback resistor $R_F$:\n$$I_{\\text{test}} = \\frac{V_P - V_{\\text{out}}}{R_F} \\implies V_{\\text{out}} = V_P - I_{\\text{test}} R_F$$\n\nAt node $V_{\\text{out}}$, applying KCL (sum of currents entering equals the current leaving through $R_{D2}$):\n$$I_{\\text{test}} + i_{d3} = \\frac{V_{\\text{out}}}{R_{D2}}$$\n\nSubstitute $i_{d3}$ and $V_{\\text{out}}$ into this equation:\n$$I_{\\text{test}} - \\frac{1}{2} g_{m1} g_{m2} R_{D1} V_P = \\frac{V_P - I_{\\text{test}} R_F}{R_{D2}}$$\n\nMultiply both sides by $R_{D2}$:\n$$I_{\\text{test}} R_{D2} - \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} V_P = V_P - I_{\\text{test}} R_F$$\n\nRearrange to group $I_{\\text{test}}$ and $V_P$:\n$$I_{\\text{test}} (R_F + R_{D2}) = V_P \\left( 1 + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} \\right)$$\n\nSolving for the input resistance $R_{\\text{in}} = \\frac{V_P}{I_{\\text{test}}}$ looking into node $P$:\n\n$$\\mathbf{R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2}}}$$\n\n*(If $M_2$ and $M_3$ are not matched, replace $\\frac{1}{2} g_{m2}$ with $\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}$.)*\n\n---\n\n### 3. Total Input Impedance $Z_{\\text{in}}(s)$ (Including $C_{\\text{in}}$)\n\nAs indicated in the schematic, the total input impedance seen by the current source $I_{\\text{in}}$ includes the input capacitance $C_{\\text{in}}$ in parallel with $R_{\\text{in}}$:\n\n$$Z_{\\text{in}}(s) = \\frac{1}{s C_{\\text{in}}} \\parallel R_{\\text{in}} = \\frac{R_{\\text{in}}}{1 + s R_{\\text{in}} C_{\\text{in}}}$$\n\nSubstituting $R_{\\text{in}}$:\n\n$$\\mathbf{Z_{\\text{in}}(s) = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} + s C_{\\text{in}}(R_F + R_{D2})}}$$\n\n---\n\n### 4. Limiting Cases & Intuitive Checks\n1. **Zero Gain ($g_{m1} = 0$ or $g_{m2} = 0$):**\n   $$R_{\\text{in}} = R_F + R_{D2}$$\n   Looking into node $P$, the impedance is simply $R_F$ in series with $R_{D2}$ to ground.\n2. **Short-circuited Output ($R_{D2} \\to 0$):**\n   $$R_{\\text{in}} = R_F$$\n3. **High Loop Gain ($A_0 = \\frac{1}{2} g_{m1} g_{m2} R_{D1} R_{D2} \\gg 1$ and $R_F \\gg R_{D2}$):**\n   $$R_{\\text{in}} \\approx \\frac{R_F}{A_0}$$\n   This matches the standard Miller division for shunt-shunt negative feedback.",
        "format": "markdown",
        "sha256": "b9f0bb5d7f6dba656035abe80f0307690592c2537c468df54f1c1ecbe309bedd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the exact input resistance, (RF + RD2)/(1 + A0), with A0 = ½ gm1 gm2 RD1 RD2 under its stated matched-pair assumption, and correctly accounts for RD2. The added Cin discussion is secondary and does not undermine the requested result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 18951,
        "total_tokens": 20055,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17408,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 18951,
        "total_tokens": 20055,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17408,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance of the circuit, we perform a small-signal analysis.\n\n---\n\n### 1. Circuit Description and Small-Signal Operation\n\nThe circuit is a **transimpedance amplifier (TIA)** with shunt-shunt negative feedback:\n1. **First Stage ($M_1$):** A common-source NMOS amplifier loaded by resistor $R_{D1}$. It provides an inverting voltage gain.\n2. **Second Stage ($M_2 - M_3$):** A PMOS differential pair biased by tail current source $I_{\\text{SS}}$. \n   - The gate of $M_2$ is driven by node $X$.\n   - The gate of $M_3$ is biased at a fixed DC voltage $V_b$ (AC ground).\n   - The output is taken at the drain of $M_3$ loaded by $R_{D2}$.\n   - Because $M_2$ and $M_3$ form a differential pair, an increase in $V_X$ reduces $|V_{GS2}|$, decreasing $M_2$'s current and forcing more of $I_{\\text{SS}}$ through $M_3$. Thus, $V_{\\text{out}}$ increases. This stage provides a **non-inverting** gain, ensuring that the overall open-loop gain is **inverting** (negative), which is required for stable negative feedback through $R_F$.\n\n---\n\n### 2. Small-Signal Derivation\n\nAssuming channel-length modulation is negligible ($\\lambda = 0$, $r_O \\to \\infty$), the tail current source $I_{\\text{SS}}$ is ideal, and transistors $M_2$ and $M_3$ are matched ($g_{m2} = g_{m3} = g_{m2,3}$):\n\n#### Step 1: Gain of the first stage ($M_1$)\nApplying a test voltage $v_P$ at node $P$:\n$$v_X = -g_{m1} R_{D1} v_P$$\n\n#### Step 2: Output of the differential pair ($M_2 - M_3$)\nLet $v_S$ be the small-signal voltage at the coupled sources of $M_2$ and $M_3$. With gate of $M_3$ at AC ground ($v_{G3} = 0$):\n$$v_S = \\frac{v_X + v_{G3}}{2} = \\frac{v_X}{2}$$\n\nThe small-signal drain current of $M_3$ injected into node $V_{\\text{out}}$ is:\n$$i_{d3} = g_{m2,3}(v_S - v_{G3}) = \\frac{1}{2} g_{m2,3} v_X$$\n\nSubstituting $v_X$:\n$$i_{d3} = -\\frac{1}{2} g_{m1} g_{m2,3} R_{D1} v_P$$\n\n#### Step 3: KCL at node $V_{\\text{out}}$\nApplying Kirchhoff's Current Law at node $V_{\\text{out}}$:\n$$\\frac{v_{\\text{out}}}{R_{D2}} + \\frac{v_{\\text{out}} - v_P}{R_F} - i_{d3} = 0$$\n\nSubstitute $i_{d3}$:\n$$\\frac{v_{\\text{out}}}{R_{D2}} + \\frac{v_{\\text{out}} - v_P}{R_F} = -\\frac{1}{2} g_{m1} g_{m2,3} R_{D1} v_P$$\n\nLet $A_0 = \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}$ denote the magnitude of the open-loop voltage gain. Rearranging:\n$$v_{\\text{out}} \\left( \\frac{1}{R_{D2}} + \\frac{1}{R_F} \\right) = v_P \\left( \\frac{1}{R_F} - \\frac{A_0}{R_{D2}} \\right)$$\n\n$$v_{\\text{out}} \\left( \\frac{R_F + R_{D2}}{R_F R_{D2}} \\right) = v_P \\left( \\frac{R_{D2} - A_0 R_F}{R_F R_{D2}} \\right)$$\n\n$$v_{\\text{out}} = v_P \\frac{R_{D2} - A_0 R_F}{R_F + R_{D2}}$$\n\n#### Step 4: KCL at node $P$ to find $R_{\\text{in}}$\nSince the gate of $M_1$ draws no current at low frequencies, the current $i_{\\text{in}}$ entering node $P$ flows entirely through $R_F$:\n$$i_{\\text{in}} = \\frac{v_P - v_{\\text{out}}}{R_F}$$\n\nSubstitute $v_{\\text{out}}$:\n$$v_P - v_{\\text{out}} = v_P - v_P \\frac{R_{D2} - A_0 R_F}{R_F + R_{D2}} = v_P \\frac{(R_F + R_{D2}) - (R_{D2} - A_0 R_F)}{R_F + R_{D2}} = v_P \\frac{R_F (1 + A_0)}{R_F + R_{D2}}$$\n\nTherefore:\n$$i_{\\text{in}} = \\frac{v_P}{R_F} \\left[ \\frac{R_F (1 + A_0)}{R_F + R_{D2}} \\right] = v_P \\frac{1 + A_0}{R_F + R_{D2}}$$\n\n---\n\n### 3. Input Resistance ($R_{\\text{in}}$)\n\nThe input resistance looking into node $P$ (as indicated by the arrow in the figure) is:\n\n$$R_{\\text{in}} = \\frac{v_P}{i_{\\text{in}}} = \\frac{R_F + R_{D2}}{1 + A_0} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}}$$\n\n#### Verification via Feedback Theory:\n- The passive input resistance with the loop open (setting $g_{m1} = 0$) is:\n  $$R_{\\text{in,open}} = R_F + R_{D2}$$\n- The loop gain is:\n  $$T = \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2} = A_0$$\n- By Blackman's impedance formula for shunt feedback at the input:\n  $$R_{\\text{in}} = \\frac{R_{\\text{in,open}}}{1 + T} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}}$$\n\n#### Practical Approximation:\nWhen the loop gain is large ($A_0 \\gg 1$) and $R_F \\gg R_{D2}$:\n$$R_{\\text{in}} \\approx \\frac{R_F}{\\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}}$$\n\n---\n\n### 4. Total Input Impedance ($Z_{\\text{in}}(s)$)\n\nIf the input capacitance $C_{\\text{in}}$ is included (looking from the current source $I_{\\text{in}}$), the total input impedance is the parallel combination of $R_{\\text{in}}$ and $C_{\\text{in}}$:\n\n$$Z_{\\text{in}}(s) = R_{\\text{in}} \\parallel \\frac{1}{s C_{\\text{in}}} = \\frac{R_{\\text{in}}}{1 + s C_{\\text{in}} R_{\\text{in}}}$$\n\n$$Z_{\\text{in}}(s) = \\frac{\\dfrac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}}}{1 + s C_{\\text{in}} \\left(\\dfrac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}}\\right)}$$",
        "format": "markdown",
        "sha256": "0afa2635625b572a0584305f14a7dabb62c49e14aea662834ad363d46cf5ba68"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Derives the exact input resistance, Rin = (RF + RD2)/(1 + A0), with A0 = 1/2 gm1 gm2,3 RD1 RD2, matching the two-stage model. The additional approximation and capacitance discussion do not undermine the requested result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 19281,
        "total_tokens": 20385,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17347,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 19281,
        "total_tokens": 20385,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17347,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise resulting from the thermal noise spectrum $S_{\\text{th}}$ of the low-dropout (LDO) regulator, we analyze how supply noise is converted into phase fluctuations at nodes $X$ and $Y$. \n\nThe conversion occurs through two primary mechanisms:\n1. **Supply Pushing (Frequency Modulation)** — typically the dominant mechanism.\n2. **Harmonic Folding & Asymmetry (Time-Variant Mixing)** via the Linear Time-Variant (LTV) / Hajimiri framework.\n\n---\n\n### 1. Dominant Mechanism: Supply Pushing (FM Theory)\n\n#### A. Determine the Supply Pushing Factor ($K_{\\text{push}}$)\nThe DC voltage drop across the inductors $L_1$ is negligible. Therefore, the average DC voltage at the oscillation nodes $X$ and $Y$ is set directly by the LDO output:\n$$V_{X,\\text{DC}} = V_{Y,\\text{DC}} \\approx V_{\\text{out}}$$\n\nThe MOS varactors $M_{\\text{v1}}$ and $M_{\\text{v2}}$ have their gates tied to nodes $X$ and $Y$ and their source/drain/bulk terminals tied to $V_{\\text{cont}}$. The average voltage across the varactors is:\n$$V_{\\text{var}} = V_{\\text{out}} - V_{\\text{cont}}$$\n\nBecause the oscillation frequency is:\n$$\\omega_0 = \\frac{1}{\\sqrt{L_1 C_{\\text{tot}}}}$$\nany variation in $V_{\\text{out}}$ modulates $C_{\\text{tot}}$ primarily via the varactor capacitance $C_{\\text{var}}(V_{\\text{var}})$. \n\nThe **supply pushing factor** $K_{\\text{push}}$ is defined as:\n$$K_{\\text{push}} = \\frac{\\partial \\omega_0}{\\partial V_{\\text{out}}} = -\\frac{\\omega_0}{2 C_{\\text{tot}}} \\frac{\\partial C_{\\text{tot}}}{\\partial V_{\\text{out}}}$$\n\nSince $V_{\\text{var}} = V_{\\text{out}} - V_{\\text{cont}}$, we have:\n$$\\frac{\\partial C_{\\text{var}}}{\\partial V_{\\text{out}}} = -\\frac{\\partial C_{\\text{var}}}{\\partial V_{\\text{cont}}}$$\n\nIf the varactors dominate the frequency sensitivity, the pushing factor is approximately equal to the VCO tuning sensitivity $K_{\\text{VCO}}$:\n$$|K_{\\text{push}}| \\approx K_{\\text{VCO}} = \\left|\\frac{\\partial \\omega_0}{\\partial V_{\\text{cont}}}\\right| \\quad (\\text{in rad/s/V})$$\n*(Note: Additional minor contributions to $K_{\\text{push}}$ arise from the voltage-dependent junction capacitances $C_{\\text{db1,2}}$ of $M_1, M_2$ and amplitude-dependent capacitance via AM-to-PM conversion).*\n\n---\n\n#### B. Compute Phase Noise from $K_{\\text{push}}$\nLet the LDO generate a single-sided thermal voltage noise spectral density $S_{\\text{th}}(\\Delta f)$ (in $\\text{V}^2/\\text{Hz}$). \n\n1. **Frequency Fluctuations:**\n   The noise voltage $v_n(t)$ at the LDO output creates instantaneous frequency fluctuations:\n   $$\\Delta\\omega(t) = K_{\\text{push}} v_n(t) \\implies S_{\\Delta\\omega}(\\Delta\\omega) = K_{\\text{push}}^2 S_{\\text{th}}(\\Delta\\omega)$$\n\n2. **Phase Fluctuations:**\n   Because excess phase is the time integral of frequency ($\\phi(t) = \\int \\Delta\\omega(t) dt$), the transfer function from frequency deviation to phase is $1/s$:\n   $$S_\\phi(\\Delta\\omega) = \\frac{S_{\\Delta\\omega}(\\Delta\\omega)}{\\Delta\\omega^2} = \\frac{K_{\\text{push}}^2}{\\Delta\\omega^2} S_{\\text{th}}(\\Delta\\omega) \\quad (\\text{in rad}^2/\\text{Hz})$$\n\n3. **Single-Sideband Phase Noise $\\mathcal{L}(\\Delta\\omega)$:**\n   By standard convention, $\\mathcal{L}(\\Delta\\omega) = \\frac{1}{2} S_\\phi(\\Delta\\omega)$:\n   $$\\mathcal{L}(\\Delta\\omega) = 10 \\log_{10} \\left( \\frac{K_{\\text{push}}^2}{2 \\Delta\\omega^2} S_{\\text{th}}(\\Delta\\omega) \\right) \\quad (\\text{in dBc/Hz})$$\n\n   Equivalently, using cyclic frequency $\\Delta f$ (with $K_{\\text{push, Hz/V}} = \\frac{K_{\\text{push}}}{2\\pi}$):\n   $$\\mathcal{L}(\\Delta f) = 10 \\log_{10} \\left( \\frac{K_{\\text{push, Hz/V}}^2}{2 (\\Delta f)^2} S_{\\text{th}}(\\Delta f) \\right)$$\n\n---\n\n### 2. High-Frequency Noise Folding (LTV / Hajimiri Model)\n\nBecause the VCO is a periodic, time-varying (LTV) system, noise components from the LDO at harmonics of $\\omega_0$ can fold into near-carrier phase noise:\n\n$$\\mathcal{L}(\\Delta\\omega) = \\frac{1}{4 q_{\\text{max}}^2 \\Delta\\omega^2} \\sum_{n=0}^{\\infty} c_n^2 S_{\\text{th}}(n\\omega_0)$$\nwhere $q_{\\text{max}} = C_{\\text{tot}} V_{\\text{tank}}$ is the maximum charge swing across the tank, and $c_n$ are the Fourier coefficients of the Impulse Sensitivity Function (ISF) $\\Gamma(t)$ from the $V_{\\text{out}}$ node.\n\n* **$n = 0$ (DC/Low-Frequency Component):** \n  Matches the FM pushing derivation above, where $c_0 \\propto K_{\\text{push}}$.\n* **$n = 2$ ($2\\omega_0$ Folding):** \n  Because $V_{\\text{out}}$ is a common-mode node, the cross-coupled pair switches twice per cycle, generating common-mode activity at $2\\omega_0$. If the LDO exhibits high-frequency noise around $2\\omega_0$, it folds down into the carrier via the coefficient $c_2$.\n* **$n = 1$ ($\\omega_0$ Asymmetry Component):** \n  In an ideally symmetric circuit, fundamental noise at $\\omega_0$ is purely common-mode and rejected ($c_1 \\approx 0$). However, any physical mismatch between inductors $L_1$, transistors $M_1/M_2$, or varactors converts common-mode supply noise at $\\omega_0$ directly into differential phase noise:\n  $$c_1 \\propto \\left( \\frac{\\Delta L}{L} + \\frac{\\Delta C}{C} + \\frac{\\Delta g_m}{g_m} \\right)$$\n\n---\n\n### Step-by-Step Procedure for Practical Computation\n\n1. **Obtain $S_{\\text{th}}$:** Determine the LDO output noise voltage spectral density $S_{\\text{th}}$ (in $\\text{V}^2/\\text{Hz}$) at the offset frequency $\\Delta f$ (and optionally at $2f_0$).\n2. **Find $K_{\\text{push}}$:** \n   * **Analytically/Approximation:** Use $|K_{\\text{push}}| \\approx K_{\\text{VCO}} = 2\\pi \\frac{\\partial f_0}{\\partial V_{\\text{cont}}}$.\n   * **Via Simulation:** Run a DC sweep or parametric transient simulation of $V_{\\text{out}}$ by $\\pm \\Delta V$ and compute $K_{\\text{push}} = 2\\pi \\frac{\\Delta f_0}{\\Delta V_{\\text{out}}}$.\n3. **Calculate Base Phase Noise:**\n   $$\\mathcal{L}(\\Delta f) = \\frac{K_{\\text{push, Hz/V}}^2}{2 (\\Delta f)^2} S_{\\text{th}}(\\Delta f)$$\n4. **Include Folding/Mismatch (if high precision is required):** Use Periodic Steady-State (PSS) and Periodic Noise (PNoise) simulations in Cadence Spectre RF / ADS to capture the high-frequency folding terms ($c_1, c_2$).",
        "format": "markdown",
        "sha256": "24dbb3bd833b8174982cbff8058c696358bb010256ae26479dce457fedbd2058"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing through the varactors, relates Kpush to KVCO, and gives the FM-to-phase-noise conversion with its 1/Δf² dependence. The additional noise-folding discussion is not needed for the core answer.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1127,
        "output_tokens": 9716,
        "total_tokens": 10843,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7833,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1127,
        "output_tokens": 9716,
        "total_tokens": 10843,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7833,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise resulting from the LDO thermal noise spectrum $S_{\\text{th}}$, we analyze how voltage fluctuations on the supply rail ($V_{\\text{out}}$) are converted into phase fluctuations at the oscillator output.\n\n---\n\n### 1. Primary Mechanism: Frequency Modulation via Supply Pushing\n\nThe predominant mechanism by which low-frequency supply noise produces phase noise is **supply pushing**—the modulation of the VCO oscillation frequency $\\omega_{\\text{osc}}$ by changes in the supply voltage $V_{\\text{out}}$.\n\nWe define the supply pushing factor as:\n$$K_{\\text{push}} = \\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{out}}} \\quad [\\text{rad}/(\\text{s}\\cdot\\text{V})] \\quad \\text{or} \\quad K_{\\text{push,Hz}} = \\frac{\\partial f_{\\text{osc}}}{\\partial V_{\\text{out}}} = \\frac{K_{\\text{push}}}{2\\pi} \\quad [\\text{Hz}/\\text{V}]$$\n\n---\n\n### 2. Determining $K_{\\text{push}}$ for this Topology\n\nThe oscillation frequency of the LC tank is:\n$$\\omega_{\\text{osc}} \\approx \\frac{1}{\\sqrt{L_1 C_{\\text{tot}}}}$$\nwhere $C_{\\text{tot}}$ is the total capacitance seen at each tank node ($X$ and $Y$). $C_{\\text{tot}}$ depends on $V_{\\text{out}}$ through several components:\n\n#### A. Varactor Tuning Sensitivity (Dominant Contributor)\n* The inductors $L_1$ carry the DC bias current to the cross-coupled pair $M_1, M_2$. Because ideal inductors have zero DC resistance (and real inductors have negligible resistance), the DC voltage at nodes $X$ and $Y$ is:\n  $$V_{X,\\text{DC}} = V_{Y,\\text{DC}} = V_{\\text{out}}$$\n* The varactors $M_{\\text{v1}}$ and $M_{\\text{v2}}$ have their gates connected to nodes $X$ and $Y$, and their source/drain terminals tied to the control voltage $V_{\\text{cont}}$.\n* Thus, the DC voltage across each varactor is:\n  $$V_{\\text{var}} = V_{\\text{out}} - V_{\\text{cont}}$$\n* Differentiating with respect to $V_{\\text{out}}$ and $V_{\\text{cont}}$:\n  $$\\frac{\\partial V_{\\text{var}}}{\\partial V_{\\text{out}}} = 1 = -\\frac{\\partial V_{\\text{var}}}{\\partial V_{\\text{cont}}}$$\n* Therefore, the pushing factor due to the varactors is directly equal in magnitude to the VCO tuning gain $K_{\\text{VCO}}$:\n  $$K_{\\text{push,var}} = \\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{out}}}\\Bigg|_{\\text{var}} = -\\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{cont}}} = -K_{\\text{VCO}}$$\n  This makes the varactors typically the **largest contributor** to supply pushing in this circuit.\n\n#### B. Nonlinear Parasitic Capacitances\n* **Drain-bulk junction capacitances ($C_{db1}, C_{db2}$):** Since the drains are at $V_{\\text{out}}$ and the substrate is at ground, the reverse bias is $V_{\\text{out}}$. As $V_{\\text{out}}$ increases, the depletion region widens and $C_{db}$ decreases, slightly increasing $\\omega_{\\text{osc}}$:\n  $$\\frac{\\partial C_{db}}{\\partial V_{\\text{out}}} < 0 \\implies \\frac{\\partial \\omega_{\\text{osc}}}{\\partial C_{db}}\\frac{\\partial C_{db}}{\\partial V_{\\text{out}}} > 0$$\n* **Switched-capacitor banks ($B_1, B_2$):** For switches that are turned OFF, the reverse-biased junction capacitance of the switch transistors also depends on $V_{\\text{out}}$.\n\n#### C. Finite Tail Impedance\n* If the tail current source $I_{\\text{VCO}}$ has a finite output resistance $r_O$, variations in $V_{\\text{out}}$ modulate the tail current:\n  $$\\Delta I_{\\text{VCO}} \\approx \\frac{\\Delta V_{\\text{out}}}{r_O}$$\n  This current variation causes additional frequency shifting through current pushing ($\\partial \\omega_{\\text{osc}}/\\partial I_{\\text{VCO}}$).\n\nSumming all contributions gives the net pushing factor:\n$$K_{\\text{push}} = -\\frac{\\omega_{\\text{osc}}}{2 C_{\\text{tot}}} \\frac{\\partial C_{\\text{tot}}}{\\partial V_{\\text{out}}} + \\frac{\\partial \\omega_{\\text{osc}}}{\\partial I_{\\text{VCO}}}\\frac{1}{r_O} \\approx -K_{\\text{VCO}}$$\n\n---\n\n### 3. Calculating the Phase Noise $\\mathcal{L}(\\Delta f)$\n\nLet $S_{\\text{th}}$ denote the single-sided power spectral density (PSD) of the LDO output voltage noise in $\\text{V}^2/\\text{Hz}$.\n\n1. **Frequency Fluctuation Spectrum:**\n   The voltage noise modulates the instantaneous frequency:\n   $$\\Delta\\omega(t) = K_{\\text{push}} \\cdot v_{\\text{out,noise}}(t)$$\n   The spectral density of frequency fluctuations is:\n   $$S_{\\Delta\\omega}(\\Delta f) = K_{\\text{push}}^2 S_{\\text{th}}(\\Delta f) \\quad [(\\text{rad}/\\text{s})^2/\\text{Hz}]$$\n\n2. **Phase Fluctuation Spectrum:**\n   Since phase is the time integral of frequency ($\\phi(t) = \\int \\Delta\\omega(t) dt$), integration in the frequency domain corresponds to dividing by $\\Delta\\omega^2 = (2\\pi \\Delta f)^2$:\n   $$S_{\\phi}(\\Delta f) = \\frac{S_{\\Delta\\omega}(\\Delta f)}{(2\\pi \\Delta f)^2} = \\frac{K_{\\text{push}}^2}{(2\\pi \\Delta f)^2} S_{\\text{th}}(\\Delta f) = \\frac{K_{\\text{push,Hz}}^2}{\\Delta f^2} S_{\\text{th}}(\\Delta f) \\quad [\\text{rad}^2/\\text{Hz}]$$\n\n3. **Single-Sideband (SSB) Phase Noise:**\n   Under the narrow-band frequency modulation approximation, the single-sideband phase noise $\\mathcal{L}(\\Delta f)$ (in $\\text{dBc}/\\text{Hz}$) at an offset frequency $\\Delta f$ from the carrier is:\n   $$\\mathcal{L}(\\Delta f) = 10 \\log_{10} \\left[ \\frac{1}{2} S_{\\phi}(\\Delta f) \\right]$$\n\n   $$\\mathcal{L}(\\Delta f) = 10 \\log_{10} \\left[ \\frac{K_{\\text{push}}^2}{2 (2\\pi \\Delta f)^2} S_{\\text{th}}(\\Delta f) \\right] = 10 \\log_{10} \\left[ \\frac{K_{\\text{push,Hz}}^2}{2 \\Delta f^2} S_{\\text{th}}(\\Delta f) \\right]$$\n\n   If the varactor dominates ($K_{\\text{push}} \\approx -K_{\\text{VCO}}$), this simplifies to:\n   $$\\mathcal{L}(\\Delta f) \\approx 10 \\log_{10} \\left[ \\frac{K_{\\text{VCO}}^2}{2 (2\\pi \\Delta f)^2} S_{\\text{th}}(\\Delta f) \\right]$$\n\nBecause thermal noise $S_{\\text{th}}$ is white (flat across frequency), the resulting phase noise exhibits a characteristic **$1/f^2$** slope ($-\\text{20 dB/dec}$) versus offset frequency $\\Delta f$.\n\n---\n\n### 4. Secondary Conversion Mechanisms (High-Frequency Noise)\n\nWhile the low-frequency FM path above is the dominant contributor, white thermal noise from the LDO also contains high-frequency components:\n\n1. **Noise near $2\\omega_{\\text{osc}}$ (Harmonic Mixing):**\n   * The common-mode node of the cross-coupled pair naturally oscillates at $2\\omega_{\\text{osc}}$.\n   * Thermal noise from $V_{\\text{out}}$ near $2\\omega_{\\text{osc}}$ mixes with this second harmonic and downconverts into phase noise around the fundamental carrier $\\omega_{\\text{osc}}$.\n2. **Noise near $\\omega_{\\text{osc}}$ (Circuit Asymmetry):**\n   * Ideally, noise from $V_{\\text{out}}$ is purely common-mode and is rejected by the differential tank.\n   * Any physical mismatch between the two halves ($\\Delta L_1$, varactor mismatch, or $M_1/M_2$ mismatch) converts common-mode noise at $\\omega_{\\text{osc}}$ directly into differential phase noise.\n\n---\n\n### Summary of Computation Steps\n1. **Find/Measure $S_{\\text{th}}$:** Obtain the output noise spectral density of the LDO ($\\text{V}^2/\\text{Hz}$) at the offset frequency of interest.\n2. **Determine $K_{\\text{push}}$:** Calculate or simulate $\\frac{\\partial f_{\\text{osc}}}{\\partial V_{\\text{out}}}$ across the tuning range (approximated by $K_{\\text{VCO}}$ if varactors dominate).\n3. **Evaluate Phase Noise:** Compute $\\mathcal{L}(\\Delta f) = 10 \\log_{10} \\left( \\frac{K_{\\text{push,Hz}}^2}{2 \\Delta f^2} S_{\\text{th}} \\right)$.",
        "format": "markdown",
        "sha256": "153ac03696c2e3b5ee161a1039751176e2516da71d89a9cf99c64b3da831aee3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, relates the noise conversion to dfosc/dVout and the varactor tuning sensitivity, and applies FM-to-phase conversion with the required 1/Δf² dependence. The optional secondary mechanisms do not change the correct main result.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1127,
        "output_tokens": 17053,
        "total_tokens": 18180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14883,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1127,
        "output_tokens": 17053,
        "total_tokens": 18180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14883,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise resulting from the LDO thermal noise spectrum $S_{\\text{th}}$, we determine how the voltage noise at the LDO output node $V_{\\text{out}}$ modulates the oscillation frequency. This mechanism is known as **frequency pushing** (FM modulation), accompanied by potential **high-frequency noise folding**.\n\n---\n\n### 1. The Phase Noise Formula (General Result)\n\nIf the LDO produces a voltage noise power spectral density $S_{\\text{th}}(\\Delta f)$ (in $\\text{V}^2/\\text{Hz}$, single-sided) at node $V_{\\text{out}}$, it modulates the VCO frequency through the **supply pushing factor**, $K_{\\text{push}}$:\n\n$$K_{\\text{push}} = \\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{out}}} \\quad [\\text{rad}/(\\text{s}\\cdot\\text{V})] \\quad \\text{or} \\quad K_{\\text{push,Hz}} = \\frac{\\partial f_{\\text{osc}}}{\\partial V_{\\text{out}}} = \\frac{K_{\\text{push}}}{2\\pi} \\quad [\\text{Hz}/\\text{V}]$$\n\nBecause phase is the time integral of frequency ($\\phi(t) = \\int \\Delta\\omega(t)\\,dt$), the transfer function from voltage noise to phase is:\n\n$$\\Phi(s) = \\frac{K_{\\text{push}}}{s} V_n(s)$$\n\nThus, the phase noise power spectral density $S_\\phi(\\Delta f)$ (in $\\text{rad}^2/\\text{Hz}$) at an offset frequency $\\Delta f$ is:\n\n$$S_\\phi(\\Delta f) = \\frac{K_{\\text{push}}^2}{(2\\pi \\Delta f)^2} S_{\\text{th}}(\\Delta f) = \\frac{K_{\\text{push,Hz}}^2}{\\Delta f^2} S_{\\text{th}}(\\Delta f)$$\n\nThe single-sideband (SSB) phase noise $\\mathcal{L}(\\Delta f)$ (in $\\text{dBc/Hz}$) is given by:\n\n$$\\mathcal{L}(\\Delta f) = 10 \\log_{10} \\left( \\frac{1}{2} S_\\phi(\\Delta f) \\right) = 10 \\log_{10} \\left[ \\frac{K_{\\text{push,Hz}}^2}{2\\Delta f^2} S_{\\text{th}}(\\Delta f) \\right]$$\n\n---\n\n### 2. Physical Origin and Calculation of $K_{\\text{push}}$\n\nTo compute the phase noise quantitatively, we must find $K_{\\text{push}}$ from the circuit parameters:\n\n#### A. DC Common-Mode Level at Nodes $X$ and $Y$\nBecause inductors $L_1$ carry the DC current $I_{\\text{VCO}}/2$ and have negligible DC series resistance:\n$$V_{X,\\text{DC}} = V_{Y,\\text{DC}} \\approx V_{\\text{out}}$$\nAny low-frequency variation $\\Delta V_{\\text{out}}$ shifts the common-mode voltage of nodes $X$ and $Y$ directly:\n$$\\Delta V_{X,Y,\\text{CM}} = \\Delta V_{\\text{out}}$$\n\n#### B. Varactor Sensitivity (Dominant Mechanism)\nThe varactors $M_{v1}$ and $M_{v2}$ have their control terminal connected to $V_{\\text{cont}}$ and their other terminals connected to nodes $X$ and $Y$. The effective tuning voltage across the varactors is:\n$$V_{\\text{var}} = V_{\\text{cont}} - V_{\\text{out}}$$\nSince the resonance frequency is $\\omega_{\\text{osc}} \\approx 1/\\sqrt{L_1 C_{\\text{tot}}}$, a change in $V_{\\text{out}}$ alters the varactor capacitance in the opposite direction of $V_{\\text{cont}}$:\n$$\\frac{\\partial C_{\\text{var}}}{\\partial V_{\\text{out}}} = -\\frac{\\partial C_{\\text{var}}}{\\partial V_{\\text{cont}}}$$\nConsequently, the varactor contribution to pushing is directly tied to the VCO tuning gain $K_{\\text{VCO}}$:\n$$K_{\\text{push,var}} \\approx -K_{\\text{VCO}} = -\\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{cont}}}$$\n*In designs with high tuning sensitivity ($K_{\\text{VCO}}$), varactor modulation is typically the dominant contributor to supply pushing.*\n\n#### C. Parasitic Capacitance Modulation\n- **Drain-Bulk Junction Capacitance ($C_{db}$):** The drains of $M_1$ and $M_2$ sit at $V_{\\text{out}}$. As $V_{\\text{out}}$ increases, the reverse bias across the drain-bulk junctions increases, decreasing $C_{db}$ and slightly increasing $\\omega_{\\text{osc}}$:\n  $$\\frac{\\partial C_{db}}{\\partial V_{\\text{out}}} < 0 \\implies K_{\\text{push}, Cdb} > 0$$\n- **Switched-Capacitor Banks ($B_1, B_2$):** Depending on whether the switches are ON or OFF, the junction and overlap capacitances of the MOS switches also exhibit slight voltage dependency on $V_{\\text{out}}$.\n\n#### D. Tail Current Modulation (AM-to-PM Conversion)\nIf the tail current source $I_{\\text{VCO}}$ has a finite output impedance $r_O$:\n$$\\Delta I_{\\text{VCO}} \\approx \\frac{\\Delta V_{\\text{out}}}{r_O}$$\nThis modulates the oscillation amplitude $V_{\\text{tank}} \\approx \\frac{4}{\\pi} I_{\\text{VCO}} R_{\\text{tank}}$. Because the varactors and junction capacitors are nonlinear, a change in amplitude shifts their cycle-averaged capacitance, contributing further to $K_{\\text{push}}$.\n\nCombining these yields the net pushing sensitivity:\n$$K_{\\text{push}} = \\left. \\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{out}}} \\right|_{\\text{net}} \\approx -K_{\\text{VCO}} + \\frac{\\partial \\omega_{\\text{osc}}}{\\partial C_{db}}\\frac{\\partial C_{db}}{\\partial V_{\\text{out}}} + \\left(\\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{tank}}}\\frac{\\partial V_{\\text{tank}}}{\\partial I_{\\text{VCO}}}\\frac{\\partial I_{\\text{VCO}}}{\\partial V_{\\text{out}}}\\right)$$\n\n---\n\n### 3. High-Frequency Noise Folding (Around $2\\omega_0$)\n\nWhile low-frequency noise (close to DC) modulates the carrier via $K_{\\text{push}}$, high-frequency noise from the LDO around the second harmonic ($2\\omega_0$) can also fold into the phase noise due to parametric switching of the cross-coupled pair $M_1-M_2$:\n\n$$\\mathcal{L}_{2\\omega_0}(\\Delta f) = \\frac{\\Gamma_{2}^2}{4 q_{\\text{max}}^2 (2\\pi \\Delta f)^2} S_{\\text{th}}(2\\omega_0)$$\nwhere:\n- $\\Gamma_2$ is the second-harmonic Fourier coefficient of the oscillator's Impulse Sensitivity Function (ISF).\n- $q_{\\text{max}} = C_{\\text{tot}} V_{\\text{tank}}$ is the maximum charge swing across the tank.\n\n*Note:* In practice, the LDO output impedance drops or is heavily bypassed by a decoupling capacitor at $2\\omega_0$, making the low-frequency pushing mechanism ($K_{\\text{push}}$) the dominant contributor to close-in phase noise.\n\n---\n\n### Summary of Computation Steps\n\n1. **Obtain $S_{\\text{th}}(\\Delta f)$:** Measure or simulate the output noise spectral density of the LDO at offset $\\Delta f$.\n2. **Determine $K_{\\text{push}}$:** \n   - *Analytically:* Approximate $K_{\\text{push}} \\approx -K_{\\text{VCO}}$ (if varactors dominate).\n   - *In Simulation:* Run a Periodic Steady-State (PSS) analysis while varying $V_{\\text{out}}$ by a small $\\Delta V$ to find $K_{\\text{push,Hz}} = \\Delta f_{\\text{osc}} / \\Delta V_{\\text{out}}$.\n3. **Calculate Output Phase Noise:**\n   $$\\mathcal{L}(\\Delta f) = 10 \\log_{10} \\left[ \\frac{K_{\\text{push,Hz}}^2}{2\\Delta f^2} S_{\\text{th}}(\\Delta f) \\right] \\quad [\\text{dBc/Hz}]$$",
        "format": "markdown",
        "sha256": "b51416a4ff51c46859534583c5635baac15eb6ea62d825170decbc7caba17d4c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, converts LDO voltage noise through the VCO frequency sensitivity, and applies the FM-to-phase-noise 1/Δf² relation. It also notes that the supply acts directly on the varactors, making pushing closely related to KVCO; the extra secondary discussion does not change the essential answer.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1127,
        "output_tokens": 14039,
        "total_tokens": 15166,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12116,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1127,
        "output_tokens": 14039,
        "total_tokens": 15166,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12116,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor $C_T$ to the tail node **degrades (worsens) the phase noise**. \n\nWhile a designer might naively expect $C_T$ to \"filter\" high-frequency noise from the tail current source $I_{\\text{SS}}$, it actually introduces several severe noise mechanisms. This phenomenon has been extensively analyzed in RF design (notably by Hegazi, Rael, and Abidi in their seminal work on oscillator noise filtering).\n\nThe degradation occurs due to the following primary mechanisms:\n\n---\n\n### 1. Channel Thermal Noise of the Differential Pair ($M_1, M_2$)\n* **Without $C_T$ (ideal current source):**  \n  When the oscillator experiences large differential swings, one transistor is fully ON and the other is completely OFF for most of the period. Since the OFF transistor conducts zero current and the tail current source has an extremely high impedance, the ON transistor is in series with an open-circuit-like source impedance. By KCL, **its channel thermal noise is degenerated to zero**. Consequently, the differential pair only injects channel thermal noise into the tank during the very brief zero-crossing transitions when both transistors are simultaneously conducting.\n* **With $C_T$ present:**  \n  $C_T$ provides a low-impedance AC path to ground at the oscillation frequency $\\omega_0$ and its harmonics. When $M_1$ is ON and $M_2$ is OFF, the source of $M_1$ is held at an AC ground by $C_T$. $M_1$ now acts as an un-degenerated common-source device, and its channel thermal noise ($4kT\\gamma g_m$) **flows directly into the tank for the entire half-cycle** it is ON (and likewise for $M_2$ during the other half-cycle). This drastically increases the total noise injected into the resonator.\n\n---\n\n### 2. Loading of the Resonator Tank (Degradation of Tank $Q$)\n* During peaks of the differential oscillation swing, the drain voltage of the ON transistor swings low while its gate is at the high output node. This drives the ON transistor deeply into the **triode (linear) region**.\n* With $C_T$ shunting node $P$ to ground, the low on-resistance ($R_{\\text{on}}$) of the transistor in triode is placed directly in parallel with the LC tank.\n* This heavily loads the tank, degrading its effective quality factor ($Q_{\\text{eff}}$) over a significant fraction of each cycle. Because phase noise is inversely proportional to $Q^2$ ($\\mathcal{L}(\\Delta\\omega) \\propto 1/Q^2$), lowering the effective $Q$ severely degrades phase noise.\n\n---\n\n### 3. Reduction of Oscillation Amplitude\n* The periodic triode loading dissipates energy from the tank each cycle.\n* Furthermore, $C_T$ sinks and sources reactive current as the tail node attempts to swing at the second harmonic ($2\\omega_0$), which distorts the commutation current and lowers the fundamental current component delivered to the tank.\n* A smaller oscillation amplitude $V_0$ degrades the signal-to-noise ratio, worsening the phase noise ($\\mathcal{L}(\\Delta\\omega) \\propto 1/V_0^2$).\n\n---\n\n### 4. Increased Upconversion of Flicker ($1/f$) Noise (AM-to-PM Conversion)\n* The tail node naturally fluctuates at $2\\omega_0$. Adding $C_T$ changes the phase relationship and amplitude of the second-harmonic voltage at node $P$.\n* The periodic charging and discharging of $C_T$ introduces asymmetry and dynamic modulation of the transistor parasitic capacitances ($C_{gs}, C_{gd}, C_{db}$), which amplifies the conversion of low-frequency and flicker noise into phase noise (AM-to-PM conversion).\n\n---\n\n### Summary Comparison\n\n| Parameter / Effect | Without $C_T$ (High Tail Impedance) | With $C_T$ (Tail Shunted to Ground) |\n| :--- | :--- | :--- |\n| **$M_1/M_2$ Noise Injection** | Only during zero-crossings | Throughout the entire cycle |\n| **Tank Loading in Triode** | Minimal (isolated by high tail $Z$) | Severe ($R_{\\text{on}}$ shunts tank to AC ground) |\n| **Effective Resonator $Q$** | High | Degraded |\n| **Oscillation Amplitude** | Maximum | Reduced |\n| **Overall Phase Noise** | **Significantly Better** | **Significantly Degraded** |\n\n*(Note: To properly filter tail noise without this penalty, designers use a **tail noise filter**—placing an inductor in parallel with the parasitic capacitance to create an open circuit/high impedance at $2\\omega_0$, rather than a pure capacitor to ground).*",
        "format": "markdown",
        "sha256": "33964e6f3a0e86ef2d045eaba7014511daf4130e4cb41c9e7da1c9759d8a1ec9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies flicker-noise upconversion as a possible degradation mechanism, but incorrectly concludes that CT always worsens phase noise and misses the class-C regime in which peak tank currents can exceed ISS and improve phase noise. Its blanket triode-loading explanation also does not capture the nonmonotonic tradeoff.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 7204,
        "total_tokens": 8305,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6149,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 7204,
        "total_tokens": 8305,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6149,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor $C_T$ to the tail node causes the **phase noise of the oscillator to degrade (increase/worsen)**. \n\nAlthough it is a common intuitive assumption that $C_T$ will act as a bypass capacitor to filter out the high-frequency noise of the tail current source $I_{\\text{SS}}$, in practice it severely degrades the phase noise due to several well-documented mechanisms:\n\n---\n\n### 1. Loss of Source Degeneration for the Cross-Coupled Pair ($M_1, M_2$)\n* **Without $C_T$:** Node $P$ presents a very high impedance. Over most of each half-cycle, one transistor is fully ON and the other is OFF. Because the ON transistor has its source connected to the high output impedance of $I_{\\text{SS}}$, it experiences strong **source degeneration**. This degeneration suppresses the transistor's channel thermal noise, preventing it from injecting noise current into the tank. The pair only injects significant thermal noise during the brief zero-crossing transition when both transistors are simultaneously ON.\n* **With $C_T$:** $C_T$ provides a low-impedance path to AC ground at the oscillation frequency $\\omega_0$ and its harmonics. Consequently, the ON transistor acts as a common-source device with **no source degeneration**. Its full channel thermal noise ($4kT\\gamma g_m$) flows directly into the LC tank over nearly the entire cycle, dramatically increasing the total noise injected into the resonator.\n\n---\n\n### 2. Tank Loading and Degradation of the Tank Quality Factor ($Q$)\n* **Without $C_T$:** Node $P$ is free to oscillate at the second harmonic ($2\\omega_0$). As the output nodes swing, the source voltage at node $P$ naturally rises and tracks the gate of the ON transistor, helping keep $V_{DS}$ sufficiently large to keep the transistor in the saturation region.\n* **With $C_T$:** $C_T$ holds node $P$ at a relatively constant AC ground potential. At the extremes of the oscillation swing:\n  * The gate of the ON transistor reaches its maximum voltage ($V_{\\text{gate}} \\approx V_{DD} + V_{\\text{peak}}$).\n  * Its drain drops to its minimum voltage ($V_{\\text{drain}} \\approx V_{DD} - V_{\\text{peak}}$).\n  * Because the source ($P$) is pinned by $C_T$, $V_{DS} = V_{\\text{drain}} - V_P$ drops to a very low value while $V_{GS}$ is at its peak.\n  \n  This forces the ON transistor deep into the **triode (linear) region**. In the triode region, the transistor behaves as a small resistor ($R_{\\text{on}}$) connected between the tank and ground, which severely loads and damps the tank, drastically reducing its effective quality factor ($Q$). Since phase noise is inversely proportional to $Q^2$ (from Leeson’s model, $\\mathcal{L}(\\Delta\\omega) \\propto 1/Q^2$), this $Q$-degradation causes a steep rise in phase noise.\n\n---\n\n### 3. Altered Switching Dynamics and Noise Upconversion\n* In a normal cross-coupled oscillator, the differential pair steers a constant current $I_{\\text{SS}}$ between the two branches. \n* With $C_T$ present, the transistors draw large, narrow, peaky current pulses from $C_T$ during each cycle. These sharp current spikes widen the impulse sensitivity function (ISF) window over which noise is converted to phase perturbation and increase the upconversion of low-frequency flicker ($1/f$) noise to close-in phase noise ($1/f^3$ region).\n\n---\n\n### Summary\nRather than improving performance, **adding $C_T$ significantly worsens phase noise** by eliminating source degeneration in $M_1-M_2$ and pulling the transistors into the deep triode region (degrading the loaded $Q$). \n\n*(Note: This is why advanced low-noise oscillator designs, such as the Hegazi-Sjöland-Abidi noise-filtering technique, do the exact opposite: they place an inductor at the tail to resonate with parasitic capacitance and ensure a **high impedance** at $2\\omega_0$.)*",
        "format": "markdown",
        "sha256": "87d0f5c31a71b6ddad7227fd0c0a15e5ccd31f2186bdfe192ca3a29e7831d82c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies flicker-noise upconversion and triode operation as possible degradations, but wrongly concludes that CT always worsens phase noise. It misses the class-C regime, where peak tank currents can exceed ISS and lower phase noise, so the effect is non-monotonic.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 9633,
        "total_tokens": 10734,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 9633,
        "total_tokens": 10734,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Connecting a capacitor $C_T$ to the tail node causes the **phase noise to degrade (worsen)** significantly. \n\nAlthough it might seem intuitive that adding a bypass capacitor filters out high-frequency noise from the tail current source $I_{\\text{SS}}$, doing so introduces several detrimental mechanisms that outweigh any filtering benefit.\n\n---\n\n### 1. The Common Intuitive Trap\nA designer might think:\n> *\"The tail current source produces noise around $2\\omega_0$ that downconverts to the oscillation frequency $\\omega_0$. A large capacitor $C_T$ to ground will filter out this high-frequency noise, thus improving phase noise.\"*\n\nHowever, in practice, **the phase noise gets significantly worse** due to the reasons detailed below.\n\n---\n\n### 2. Physical Mechanisms Causing Phase Noise Degradation\n\n#### A. Resonator Loading and $Q$-Degradation (Triode Operation)\n* As the differential voltage swings, one output node (say, node $X$) drops to its minimum ($V_{\\text{DD}} - V_0$), while the other node (node $Y$) reaches its maximum ($V_{\\text{DD}} + V_0$).\n* Transistor $M_1$ has its gate at $V_Y$ (high) and its drain at $V_X$ (low), driving it deep into the **triode (linear) region**.\n* **Without $C_T$:** Node $P$ is free to move. The tail current source presents a high impedance, limiting the current drawn from the tank.\n* **With $C_T$:** Node $P$ is held at an **AC ground**. When $M_1$ enters the triode region, its low channel on-resistance ($r_{\\text{on}}$) connects the LC tank directly to AC ground through $C_T$.\n* This heavily damps the tank, drastically degrading the **effective quality factor ($Q_{\\text{eff}}$)** for a significant portion of each cycle. According to Leeson’s formula ($\\mathcal{L} \\propto 1/Q^2$), lowering $Q$ severely degrades phase noise. Furthermore, this damping reduces the oscillation amplitude, which degrades phase noise even more ($\\mathcal{L} \\propto 1/V_0^2$).\n\n#### B. Maximum Noise Injection at the Most Vulnerable Instant (Zero Crossing)\n* According to Hajimiri’s phase noise theory, an oscillator is most sensitive to phase perturbation at the **zero-crossings** of the differential waveform, where the **Impulse Sensitivity Function (ISF, $\\Gamma$) is at its maximum**.\n* At the zero-crossing, both $M_1$ and $M_2$ are simultaneously ON and conducting:\n  * **Without $C_T$:** The high tail impedance degenerates both transistors. The sum of their currents is strictly constrained to $I_{\\text{SS}}$, suppressing differential and common-mode noise amplification.\n  * **With $C_T$:** The tail node is an AC ground. Transistors $M_1$ and $M_2$ behave as **un-degenerated common-source amplifiers**. They can draw large dynamic currents far exceeding $I_{\\text{SS}}$, maximizing their transconductance ($g_m$). Consequently, they inject **maximum thermal noise directly into the tank at the exact moment the circuit is most sensitive to phase noise**.\n\n#### C. Increased AM-to-PM Conversion and Flicker ($1/f$) Noise Upconversion\n* Because the transistors repeatedly enter deep triode and switch with an AC-grounded source, the parasitic capacitances seen by the tank vary drastically and nonlinearly throughout the oscillation cycle.\n* This dynamic capacitance variation creates significant **AM-to-PM conversion**, which translates amplitude fluctuations and low-frequency flicker ($1/f$) noise from the transistors and current source into close-in ($1/f^3$) phase noise.\n\n---\n\n### 3. Practical Perspective: The \"Tail Filter\"\nThis phenomenon is the fundamental reason why modern low-phase-noise oscillator design (pioneered by Hegazi, Rael, and Abidi) does the exact opposite:\n* Rather than providing a low-impedance path to ground at the tail, designers insert a **tail filter** (an inductor tuned to resonate with the tail capacitance at $2\\omega_0$).\n* This creates a **high impedance (open circuit) at $2\\omega_0$**, preventing the cross-coupled pair from loading the tank and suppressing noise injection.\n\n### Summary\nAdding $C_T$ holds the tail node at AC ground, which:\n1. **Damps the LC tank** when the transistors enter the triode region (lowering $Q$ and amplitude).\n2. **Removes degeneration** at the zero-crossings, injecting maximum noise when the oscillator is most sensitive.\n\nTherefore, **phase noise degrades**.",
        "format": "markdown",
        "sha256": "e016f8cddab4dce69beded2ffe7c279b14c997bfa5c5dbf314f8926227d17de7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies flicker-noise upconversion, a relevant degradation mechanism, but incorrectly claims CT always worsens phase noise and misses the class-C-like regime where peak tank current can exceed ISS and improve phase noise.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 10260,
        "total_tokens": 11361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1101,
        "output_tokens": 10260,
        "total_tokens": 11361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit schematic, this is a canonical **Parallel-Coupled Quadrature LC Oscillator (P-QVCO)**, consisting of two identical differential LC oscillators coupled to one another to generate quadrature outputs ($90^\\circ$ out of phase).\n\n---\n\n### 1. Circuit Identification and Operating Principle\n\n* **Core Tanks & Negative-Resistance Pairs:**\n  * **Top Stage:** Inductors connected to $V_{\\text{DD}}$ load the differential nodes $X_1$ and $Y_1$. The inner NMOS cross-coupled pair (biased with tail current $I_{\\text{SS}}$) provides negative resistance ($-2/g_{m,\\text{SS}}$) to cancel the tank losses.\n  * **Bottom Stage:** Identical structure loaded at nodes $X_2$ and $Y_2$ with an inner cross-coupled pair biased with tail current $I_{\\text{SS}}$.\n\n* **Coupling Pairs:**\n  * In each stage, the outer NMOS pair (biased with tail current $I_1$) acts as the coupling pair.\n  * **Top to Bottom:** Outputs $(X_1, Y_1)$ are cross-coupled (inverted, contributing a $180^\\circ$ phase shift) to the gates of the bottom coupling pair.\n  * **Bottom to Top:** Outputs $(X_2, Y_2)$ are directly coupled (non-inverted, $0^\\circ$ phase shift) to the gates of the top coupling pair.\n\n* **Quadrature Condition:**\n  For steady-state oscillation around the two-stage loop:\n  $$\\theta_1 + \\theta_2 + 180^\\circ = 360^\\circ k$$\n  By symmetry ($\\theta_1 = \\theta_2 = \\theta$), each stage must provide a phase shift of:\n  $$\\theta = \\pm 90^\\circ$$\n  enforcing that the two oscillators run in **exact quadrature** ($V_1 \\perp V_2$, where $V_1 = X_1 - Y_1$ and $V_2 = X_2 - Y_2$).\n\n---\n\n### 2. Nominal Resonance Frequency ($\\omega_0$)\n\nLet:\n* $L$ be the inductance of each inductor (differential inductance $L_{\\text{diff}} = 2L$),\n* $C$ be the total capacitance at each output node to AC ground (including parasitic capacitances of the transistors, inductors, and any tank capacitors; differential capacitance $C_{\\text{diff}} = C/2$),\n* $R_p$ be the equivalent parallel resistance representing tank losses (quality factor $Q = R_p \\omega_0 C = \\frac{R_p}{\\omega_0 L}$).\n\nThe uncoupled tank resonance frequency is:\n$$\\omega_0 = \\frac{1}{\\sqrt{LC}} \\quad \\text{or} \\quad f_0 = \\frac{1}{2\\pi\\sqrt{LC}}$$\n\n---\n\n### 3. Derivation of the Frequency Shift\n\nBecause the coupling pair injects current in quadrature with the cross-coupled pair:\n$$I_{\\text{tank}} = g_{m,\\text{SS}} V_{\\text{diff}} \\pm j g_{m1} V_{\\text{diff}}$$\n\nFor the loop gain condition to hold, the tank impedance $Z(j\\omega)$ must provide a phase shift $\\phi$ to compensate for the phase of the injected current:\n$$\\tan \\phi = \\mp \\frac{g_{m1}}{g_{m,\\text{SS}}}$$\n\nFor a high-$Q$ parallel RLC tank near resonance:\n$$\\phi \\approx -\\arctan\\left[2Q\\left(\\frac{\\omega - \\omega_0}{\\omega_0}\\right)\\right] \\approx -2Q\\left(\\frac{\\omega - \\omega_0}{\\omega_0}\\right)$$\n\nEquating the two expressions:\n$$-2Q\\left(\\frac{\\omega - \\omega_0}{\\omega_0}\\right) \\approx \\mp \\frac{g_{m1}}{g_{m,\\text{SS}}}$$\n\n---\n\n### 4. Oscillation Frequency Estimate\n\n#### (a) In terms of tail currents (large-signal/switching regime):\nSince the fundamental harmonic currents scale with their respective tail currents $I_1$ and $I_{\\text{SS}}$:\n$$\\omega_{\\text{osc}} \\approx \\omega_0 \\left(1 \\pm \\frac{1}{2Q} \\frac{I_1}{I_{\\text{SS}}}\\right)$$\n\nor:\n$$f_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{LC}} \\left(1 \\pm \\frac{1}{2Q} \\frac{I_1}{I_{\\text{SS}}}\\right)$$\n\n#### (b) In terms of small-signal transconductances:\n$$\\omega_{\\text{osc}} \\approx \\omega_0 \\left(1 \\pm \\frac{1}{2Q} \\frac{g_{m1}}{g_{m,\\text{SS}}}\\right)$$\n\n#### (c) Exact closed-form solution:\nFrom the admittance balance $\\omega C - \\frac{1}{\\omega L} = \\mp g_{m1}$:\n$$\\omega_{\\text{osc}} = \\sqrt{\\omega_0^2 + \\left(\\frac{g_{m1}}{2C}\\right)^2} \\pm \\frac{g_{m1}}{2C}$$\n\n---\n\n### Summary\n\n* **Zeroth-Order Estimate (Weak Coupling, $I_1 \\ll I_{\\text{SS}}$):**\n  $$\\omega_{\\text{osc}} \\approx \\frac{1}{\\sqrt{LC}}$$\n\n* **First-Order Estimate (Accounting for Coupling Shift):**\n  $$\\omega_{\\text{osc}} \\approx \\omega_0 \\left(1 \\pm \\frac{1}{2Q}\\frac{I_1}{I_{\\text{SS}}}\\right)$$\n  *(The $\\pm$ sign indicates the well-known bimodal frequency ambiguity of P-QVCOs, where the circuit can oscillate at a frequency slightly above or below the tank resonance depending on initial conditions and startup dynamics).*",
        "format": "markdown",
        "sha256": "6ff6dbe9ae89c940ac8259e0a9b9c4dd5d3446c37b6bbe88a18c8ec928074ed2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly gives the tank resonance and the coupling-induced shift proportional to I1/ISS or gm,coupling/gm,core, including the two possible signs. However, its additional unqualified “exact” gm,coupling/(2C) result omits the core loop-gain factor and is only valid under a special edge-of-oscillation assumption, so it is a substantive modeling flaw.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 38668,
        "total_tokens": 39772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 37328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 38668,
        "total_tokens": 39772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 37328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Identification\n\nThe circuit is a classic **Quadrature LC Voltage-Controlled Oscillator (QVCO)** (often referred to as the Rofougaran topology), consisting of two identical differential LC oscillators coupled to one another:\n\n1. **Top Oscillator (Oscillator 1):**\n   - Outputs at nodes $X_1$ and $Y_1$.\n   - Tank with inductance $L$, total node capacitance $C$, and equivalent parallel resistance $R_p$ (quality factor $Q = R_p/(\\omega_0 L) = R_p \\omega_0 C$).\n   - **Inner pair:** Cross-coupled NMOS transistors biased with tail current $I_{\\text{SS}}$, acting as a negative resistance to cancel the tank loss.\n   - **Outer pair:** Coupling NMOS transistors biased with tail current $I_1$, driven by the bottom oscillator's outputs ($X_2, Y_2$).\n\n2. **Bottom Oscillator (Oscillator 2):**\n   - Outputs at nodes $X_2$ and $Y_2$.\n   - Identical tank and inner cross-coupled pair biased with $I_{\\text{SS}}$.\n   - **Outer pair:** Coupling NMOS transistors biased with tail current $I_1$, driven by the top oscillator's outputs ($X_1, Y_1$) with a **cross-connection** (providing a $180^\\circ$ phase inversion).\n\nBecause of the cross-coupling in one direction and direct coupling in the other, the loop forces a total phase shift of $180^\\circ$ between the two stages, causing them to oscillate in **quadrature** ($90^\\circ$ out of phase).\n\n---\n\n### 2. Nominal Resonant Frequency\n\nIf the coupling were disabled ($I_1 = 0$), each oscillator would operate independently at the tank's natural resonant frequency:\n\n$$\\omega_0 = \\frac{1}{\\sqrt{LC}}$$\n\n---\n\n### 3. Derivation of the Actual Oscillation Frequency\n\nIn the presence of coupling ($I_1 \\neq 0$), the coupling transistors inject a current that is in quadrature ($90^\\circ$ out of phase) with the tank voltage. To sustain steady-state oscillation, the tank impedance $Z(j\\omega)$ must introduce an equal and opposite phase shift to compensate, pulling the oscillation frequency away from $\\omega_0$.\n\n#### A. Injected Currents\nLet the differential voltages be:\n- $V_1(t) = V_{X1} - V_{Y1} = A \\cos(\\omega t)$\n- $V_2(t) = V_{X2} - V_{Y2} = \\pm A \\sin(\\omega t)$ (quadrature relationship)\n\nFor Oscillator 1:\n- The **cross-coupled pair** injects a current in phase with $V_1(t)$, with amplitude proportional to $I_{\\text{SS}}$:\n  $$i_{\\text{cross}, 1}(t) \\propto I_{\\text{SS}} \\cos(\\omega t)$$\n- The **coupling pair** injects a current proportional to $I_1$, driven by $V_2(t)$ ($90^\\circ$ out of phase):\n  $$i_{\\text{coup}, 1}(t) \\propto \\mp I_1 \\sin(\\omega t)$$\n\nThe total current injected into Tank 1 in phasor form is:\n$$I_{\\text{inj}} \\propto I_{\\text{SS}} \\pm j I_1$$\n\n#### B. Tank Phase Condition\nThe tank impedance near resonance is given by:\n$$Z(j\\omega) = \\frac{R_p}{1 + j Q \\left(\\frac{\\omega}{\\omega_0} - \\frac{\\omega_0}{\\omega}\\right)}$$\n\nFor oscillation to be sustained, the tank voltage $V_1$ must equal $Z(j\\omega) I_{\\text{inj}}$. Therefore, the phase of the tank impedance must satisfy:\n$$\\tan \\phi = \\frac{\\text{Im}[Z(j\\omega)]}{\\text{Re}[Z(j\\omega)]} = \\mp \\frac{I_1}{I_{\\text{SS}}}$$\n\nFrom the impedance expression:\n$$-Q \\left(\\frac{\\omega}{\\omega_0} - \\frac{\\omega_0}{\\omega}\\right) = \\mp \\frac{I_1}{I_{\\text{SS}}} \\implies Q \\left(\\frac{\\omega}{\\omega_0} - \\frac{\\omega_0}{\\omega}\\right) = \\pm \\frac{I_1}{I_{\\text{SS}}}$$\n\n---\n\n### 4. Frequency Estimates\n\n#### 1. First-Order Narrowband Approximation ($\\omega \\approx \\omega_0$)\nUsing the approximation $\\frac{\\omega}{\\omega_0} - \\frac{\\omega_0}{\\omega} \\approx \\frac{2(\\omega - \\omega_0)}{\\omega_0}$:\n\n$$2Q \\frac{\\omega - \\omega_0}{\\omega_0} \\approx \\pm \\frac{I_1}{I_{\\text{SS}}}$$\n\n$$\\omega \\approx \\omega_0 \\left( 1 \\pm \\frac{1}{2Q} \\frac{I_1}{I_{\\text{SS}}} \\right)$$\n\n#### 2. Exact Expression\nSolving the quadratic equation $Q\\left(\\frac{\\omega}{\\omega_0} - \\frac{\\omega_0}{\\omega}\\right) = \\pm \\frac{I_1}{I_{\\text{SS}}}$ for $\\omega > 0$:\n\n$$\\omega = \\omega_0 \\left[ \\pm \\frac{I_1}{2Q I_{\\text{SS}}} + \\sqrt{1 + \\left(\\frac{I_1}{2Q I_{\\text{SS}}}\\right)^2} \\right]$$\n\n#### 3. Small-Signal Form (in terms of transconductances)\nIf expressed in terms of the transconductances $g_{m,\\text{SS}}$ and $g_{m1}$ (where $g_{m,\\text{SS}} R_p \\approx 1$ and $Q = R_p \\omega_0 C$):\n\n$$\\omega \\approx \\omega_0 \\pm \\frac{g_{m1}}{2C}$$\n\n---\n\n### Summary\n\nThe circuit oscillates at a frequency shifted from the tank resonance:\n\n$$\\omega_{\\text{osc}} \\approx \\omega_0 \\left( 1 \\pm \\frac{1}{2Q} \\frac{I_1}{I_{\\text{SS}}} \\right) = \\frac{1}{\\sqrt{LC}} \\left( 1 \\pm \\frac{1}{2Q} \\frac{I_1}{I_{\\text{SS}}} \\right)$$\n\n*(The $\\pm$ signs represent the two possible oscillation modes, corresponding to whether stage 1 leads or lags stage 2 by $90^\\circ$.)*",
        "format": "markdown",
        "sha256": "771a8c1eb1dee3219161fa73ea65a3e1cab5c34735e22e0f81169c99413b6e31"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "{\"score_0_to_4\":4,\"rationale\":\"Gives the tank resonance and the correct coupling-induced shift, \\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u00",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 25551,
        "total_tokens": 26655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24045,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 25551,
        "total_tokens": 26655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24045,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3.8-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Identification\n\nThe circuit shown is a classic **Parallel-Coupled Quadrature LC Oscillator (P-QVCO)**:\n\n* **Two identical LC oscillators**:\n  * **Top oscillator (Stage 1)**: Formed by the two inductors, nodes $X_1$ and $Y_1$, and an inner NMOS cross-coupled differential pair biased by tail current $I_{\\mathrm{SS}}$ to provide negative resistance and sustain oscillation.\n  * **Bottom oscillator (Stage 2)**: Formed by the two inductors, nodes $X_2$ and $Y_2$, and an inner NMOS cross-coupled pair biased by tail current $I_{\\mathrm{SS}}$.\n* **Coupling pairs**:\n  * Outer NMOS pairs in both stages biased with tail current $I_1$ act as coupling transistors connected in parallel with the switching core.\n  * **Coupling polarity**:\n    * Stage 1 couples directly (in-phase) to Stage 2 ($X_1 \\to X_2$, $Y_1 \\to Y_2$).\n    * Stage 2 cross-couples (anti-phase / inverting) to Stage 1 ($X_2 \\to Y_1$, $Y_2 \\to X_1$).\n\nBecause the two-stage loop has an intrinsic $180^\\circ$ phase inversion from the cross-coupling, the Barkhausen phase criterion of $360^\\circ$ requires each stage to provide an additional $\\pm 90^\\circ$ phase shift. Thus, the two oscillators lock in **quadrature** ($90^\\circ$ out of phase).\n\n---\n\n### 2. Frequency Derivation\n\nLet each LC tank have:\n* Inductance $L$\n* Total capacitance $C$ (including parasitic capacitances at each node)\n* Parallel equivalent loss resistance $R_p$\n* Uncoupled resonance frequency:\n  $$\\omega_0 = \\frac{1}{\\sqrt{LC}}$$\n* Tank quality factor:\n  $$Q = \\frac{R_p}{\\omega_0 L} = R_p \\omega_0 C$$\n\n#### Current Injected into the Tank\nIn steady-state quadrature oscillation, the differential voltages of the two stages are:\n$$V_1(t) = V_0 \\cos(\\omega t)$$\n$$V_2(t) = \\pm V_0 \\sin(\\omega t)$$\n\n* The **core cross-coupled pair** injects an in-phase current into the tank proportional to the core tail current $I_{\\mathrm{SS}}$:\n  $$I_{\\text{core}} \\propto I_{\\mathrm{SS}}$$\n* The **coupling pair** injects a current proportional to the other oscillator's output voltage, which is in quadrature ($\\pm 90^\\circ$ out of phase), proportional to the coupling tail current $I_1$:\n  $$I_{\\text{coup}} \\propto \\pm j I_1$$\n\nThe total current injected into the tank is the vector sum:\n$$I_{\\text{total}} = I_{\\text{core}} \\pm j I_{\\text{coup}} \\propto I_{\\mathrm{SS}} \\pm j I_1$$\n\nThe phase angle $\\phi$ of the total injected current relative to the tank voltage is:\n$$\\tan \\phi = \\pm \\frac{I_1}{I_{\\mathrm{SS}}}$$\n\n---\n\n#### Tank Phase Requirement\nFor stationary oscillations, the tank must provide an equal and opposite phase shift to satisfy the Barkhausen phase condition:\n$$\\tan \\phi_{\\text{tank}} = \\mp \\frac{I_1}{I_{\\mathrm{SS}}}$$\n\nNear the resonance frequency $\\omega_0$, the impedance of a parallel $RLC$ tank is:\n$$Z(j\\omega) \\approx \\frac{R_p}{1 + 2jQ \\left(\\frac{\\omega - \\omega_0}{\\omega_0}\\right)}$$\n\nThe phase shift introduced by the tank is:\n$$\\tan \\phi_{\\text{tank}} \\approx -2Q \\left(\\frac{\\omega - \\omega_0}{\\omega_0}\\right)$$\n\n---\n\n### 3. Estimated Oscillation Frequency\n\nEquating the two phase expressions:\n$$-2Q \\left(\\frac{\\omega - \\omega_0}{\\omega_0}\\right) = \\mp \\frac{I_1}{I_{\\mathrm{SS}}}$$\n\nSolving for the oscillation frequency $\\omega_{\\text{osc}}$:\n\n$$\\omega_{\\text{osc}} \\approx \\omega_0 \\left(1 \\pm \\frac{1}{2Q} \\frac{I_1}{I_{\\mathrm{SS}}}\\right)$$\n\nor in terms of cyclical frequency $f_{\\text{osc}}$:\n\n$$f_{\\text{osc}} \\approx \\frac{1}{2\\pi \\sqrt{LC}} \\left(1 \\pm \\frac{1}{2Q} \\frac{I_1}{I_{\\mathrm{SS}}}\\right)$$\n\n---\n\n### Key Takeaways\n1. **Frequency Shift**: The coupling causes the oscillation frequency to pull away from the natural tank frequency $\\omega_0$ by an amount proportional to the coupling strength ratio $\\frac{I_1}{I_{\\mathrm{SS}}}$ and inversely proportional to the tank quality factor $Q$.\n2. **Two Modes ($\\pm$)**: The $\\pm$ sign corresponds to the two possible stable quadrature states:\n   * Stage 1 leads Stage 2 by $+90^\\circ$\n   * Stage 1 lags Stage 2 by $-90^\\circ$\n3. **Small-Signal Form**: In the small-signal / linear regime, the current ratio $\\frac{I_1}{I_{\\mathrm{SS}}}$ is replaced by the transconductance ratio of the coupling and core pairs, $\\frac{g_{m1}}{g_{m,\\mathrm{SS}}}$.",
        "format": "markdown",
        "sha256": "78bb8696c394f6b4bc51d245962bb726486ede36b4ac4351619e3aba7baaab26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the tank resonance and the coupling-induced shift \u00177 (I1/ISS)\u00183omega0/(2Q), including the two possible quadrature modes. The small-signal notation is slightly different from the golden solution, but the essential estimate and mechanism are correct.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 37764,
        "total_tokens": 38868,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36495,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 37764,
        "total_tokens": 38868,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36495,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    }
  ]
}
