{
  "model_key": "gemini_3_flash",
  "display_name": "Gemini 3 Flash",
  "provider": "google",
  "evaluation_model_ids": [],
  "thinking_effort": "high",
  "configuration_note": "Gemini 3 Flash answered the 50 tasks in three rollouts through OpenRouter's chat completions route (google/gemini-3-flash-preview) at reasoning effort high, the highest it offers. Requests set temperature to 0 and max_tokens to 65,536, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Gemini 3 Flash on 2026-11-10 ($0.50 input, $0.05 cached input, $3.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 103,
          "incorrect_count": 47,
          "partial_credit_count": 36,
          "zero_count": 11,
          "mean_score_0_to_4": 3.1733333333333333,
          "score_percent": 79.33333333333333,
          "score_distribution": {
            "0": 11,
            "1": 14,
            "2": 16,
            "3": 6,
            "4": 103
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 103,
          "incorrect_count": 47,
          "partial_credit_count": 36,
          "zero_count": 11,
          "mean_score_0_to_4": 3.1733333333333333,
          "score_percent": 79.33333333333333,
          "score_distribution": {
            "0": 11,
            "1": 14,
            "2": 16,
            "3": 6,
            "4": 103
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 77,
          "incorrect_count": 13,
          "partial_credit_count": 7,
          "zero_count": 6,
          "mean_score_0_to_4": 3.5555555555555554,
          "score_percent": 88.88888888888889,
          "score_distribution": {
            "0": 6,
            "1": 2,
            "2": 5,
            "4": 77
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 77,
          "incorrect_count": 13,
          "partial_credit_count": 7,
          "zero_count": 6,
          "mean_score_0_to_4": 3.5555555555555554,
          "score_percent": 88.88888888888889,
          "score_distribution": {
            "0": 6,
            "1": 2,
            "2": 5,
            "4": 77
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 26,
          "incorrect_count": 34,
          "partial_credit_count": 29,
          "zero_count": 5,
          "mean_score_0_to_4": 2.6,
          "score_percent": 65.0,
          "score_distribution": {
            "0": 5,
            "1": 12,
            "2": 11,
            "3": 6,
            "4": 26
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 26,
          "incorrect_count": 34,
          "partial_credit_count": 29,
          "zero_count": 5,
          "mean_score_0_to_4": 2.6,
          "score_percent": 65.0,
          "score_distribution": {
            "0": 5,
            "1": 12,
            "2": 11,
            "3": 6,
            "4": 26
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 33,
        "incorrect_count": 17,
        "partial_credit_count": 12,
        "zero_count": 5,
        "mean_score_0_to_4": 3.06,
        "score_percent": 76.5,
        "score_distribution": {
          "0": 5,
          "1": 5,
          "2": 5,
          "3": 2,
          "4": 33
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 33,
        "incorrect_count": 17,
        "partial_credit_count": 14,
        "zero_count": 3,
        "mean_score_0_to_4": 3.2,
        "score_percent": 80.0,
        "score_distribution": {
          "0": 3,
          "1": 4,
          "2": 6,
          "3": 4,
          "4": 33
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 37,
        "incorrect_count": 13,
        "partial_credit_count": 10,
        "zero_count": 3,
        "mean_score_0_to_4": 3.26,
        "score_percent": 81.5,
        "score_distribution": {
          "0": 3,
          "1": 5,
          "2": 5,
          "4": 37
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 0,
        "input_tokens": 152457,
        "output_tokens": 778970,
        "total_tokens": 931427
      },
      "known_totals": {
        "cached_input_tokens": 0,
        "input_tokens": 152457,
        "output_tokens": 778970,
        "total_tokens": 931427
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 25,
          "incorrect_count": 5,
          "partial_credit_count": 2,
          "zero_count": 3,
          "mean_score_0_to_4": 3.433333333333333,
          "score_percent": 85.83333333333333,
          "score_distribution": {
            "0": 3,
            "1": 1,
            "2": 1,
            "4": 25
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 25,
          "incorrect_count": 5,
          "partial_credit_count": 3,
          "zero_count": 2,
          "mean_score_0_to_4": 3.533333333333333,
          "score_percent": 88.33333333333333,
          "score_distribution": {
            "0": 2,
            "2": 3,
            "4": 25
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 27,
          "incorrect_count": 3,
          "partial_credit_count": 2,
          "zero_count": 1,
          "mean_score_0_to_4": 3.7,
          "score_percent": 92.5,
          "score_distribution": {
            "0": 1,
            "1": 1,
            "2": 1,
            "4": 27
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 10,
          "zero_count": 2,
          "mean_score_0_to_4": 2.5,
          "score_percent": 62.5,
          "score_distribution": {
            "0": 2,
            "1": 4,
            "2": 4,
            "3": 2,
            "4": 8
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 11,
          "zero_count": 1,
          "mean_score_0_to_4": 2.7,
          "score_percent": 67.5,
          "score_distribution": {
            "0": 1,
            "1": 4,
            "2": 3,
            "3": 4,
            "4": 8
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 10,
          "incorrect_count": 10,
          "partial_credit_count": 8,
          "zero_count": 2,
          "mean_score_0_to_4": 2.6,
          "score_percent": 65.0,
          "score_distribution": {
            "0": 2,
            "1": 4,
            "2": 4,
            "4": 10
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, the intrinsic gain **doubles** (increases by a factor of 2), assuming the drain current ($I_D$) or the overdrive voltage ($V_{GS} - V_{th}$) remains constant.\n\nHere is the step-by-step breakdown of why this happens:\n\n### 1. The Formula for Intrinsic Gain\nThe intrinsic gain ($A_v$) of a MOSFET is defined as the maximum possible voltage gain a single transistor can provide:\n$$A_v = g_m \\cdot r_o$$\nWhere:\n*   **$g_m$** is the transconductance.\n*   **$r_o$** is the output resistance.\n\n### 2. Impact on Transconductance ($g_m$)\nThe transconductance depends on the ratio of width to length ($W/L$). In the saturation region:\n$$g_m = \\sqrt{2\\mu_n C_{ox} \\frac{W}{L} I_D}$$\nIf you double both $W$ and $L$ ($W \\to 2W$ and $L \\to 2L$), the ratio **$W/L$ remains unchanged**:\n$$\\frac{2W}{2L} = \\frac{W}{L}$$\nTherefore, if the drain current $I_D$ is kept constant, **$g_m$ remains the same.**\n\n### 3. Impact on Output Resistance ($r_o$)\nThe output resistance is inversely proportional to the channel-length modulation parameter ($\\lambda$) and the drain current ($I_D$):\n$$r_o = \\frac{1}{\\lambda I_D}$$\nCrucially, $\\lambda$ is inversely proportional to the length of the channel ($L$):\n$$\\lambda \\propto \\frac{1}{L}$$\nThis means that $r_o$ is directly proportional to $L$:\n$$r_o \\propto \\frac{L}{I_D}$$\nIf you double the length ($L \\to 2L$) while keeping $I_D$ constant, the **output resistance $r_o$ doubles.**\n\n### 4. Final Calculation\nNow, we combine the effects on the intrinsic gain formula:\n*   $g_{m(new)} = g_m$\n*   $r_{o(new)} = 2 \\cdot r_o$\n\n$$A_{v(new)} = g_{m(new)} \\cdot r_{o(new)} = g_m \\cdot (2r_o) = 2 A_v$$\n\n### Summary\nBy doubling both $W$ and $L$:\n1.  The **Aspect Ratio ($W/L$)** stays the same, so the driving strength ($g_m$) stays the same.\n2.  The **Channel Length ($L$)** increases, which reduces the channel-length modulation effect, thereby doubling the output resistance ($r_o$).\n3.  The **Intrinsic Gain** increases by a factor of **2** (or **+6 dB**).\n\n**Trade-off:** While you gain more amplification, the downside is that the device area increases by 4x ($2W \\times 2L$) and the parasitic capacitances increase, which will significantly reduce the speed (bandwidth) of the transistor.",
        "format": "markdown",
        "sha256": "761b2309a815a10efb3ebc3038b782a3238252880fc9f42615fa7fa7e1959ec3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions preserves W/L and, at fixed current or overdrive, leaves gm approximately unchanged while doubling ro, so intrinsic gain approximately doubles. The extra speed trade-off is secondary.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 1721,
        "total_tokens": 1739,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1002,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 1721,
        "total_tokens": 1739,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1002,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, the intrinsic gain **doubles**.\n\nHere is the step-by-step breakdown of why this happens, assuming the transistor is operating in the saturation region.\n\n### 1. Defining Intrinsic Gain\nThe intrinsic gain ($A_v$) of a MOSFET is the maximum possible voltage gain a single transistor can provide. It is defined as the product of the transconductance ($g_m$) and the output resistance ($r_o$):\n$$A_v = g_m \\cdot r_o$$\n\n### 2. Effect on Transconductance ($g_m$)\nThe formula for transconductance (in terms of bias current $I_D$) is:\n$$g_m = \\sqrt{2\\mu C_{ox} \\frac{W}{L} I_D}$$\n\nIf we double both $W$ and $L$:\n*   The ratio $\\frac{W}{L}$ becomes $\\frac{2W}{2L}$, which is still $\\frac{W}{L}$.\n*   Assuming the bias current ($I_D$) remains constant, **$g_m$ remains unchanged.**\n\n### 3. Effect on Output Resistance ($r_o$)\nThe output resistance is determined by Channel Length Modulation ($\\lambda$):\n$$r_o = \\frac{1}{\\lambda I_D}$$\n\nThe channel length modulation parameter $\\lambda$ is inversely proportional to the length of the transistor ($L$):\n$$\\lambda \\propto \\frac{1}{L} \\implies r_o \\propto \\frac{L}{I_D}$$\n\nIf we double the length ($L \\to 2L$):\n*   The output resistance $r_o$ **doubles** (assuming $I_D$ is constant).\n\n### 4. Calculating the Final Gain\nNow, we multiply the two effects together:\n*   New $g_m' = g_m$\n*   New $r_o' = 2 \\cdot r_o$\n\n$$A_v' = g_m' \\cdot r_o' = g_m \\cdot (2r_o) = 2 \\cdot A_v$$\n\n### Summary\nBy doubling both $W$ and $L$, you keep the **aspect ratio** ($W/L$) the same, which keeps the current-driving capability ($g_m$) the same. However, the increased length reduces the channel length modulation effect, which increases the output resistance. \n\n**Result:** The intrinsic gain increases by a factor of **2** (or **+6 dB**).\n\n***\n\n### Practical Trade-offs\nWhile doubling $W$ and $L$ improves gain, it comes with costs:\n1.  **Area:** The transistor now occupies 4 times the physical area ($2W \\times 2L$).\n2.  **Speed:** The gate capacitance ($C_{gg} \\approx W \\cdot L \\cdot C_{ox}$) increases by 4 times, which significantly reduces the speed (bandwidth) of the circuit.",
        "format": "markdown",
        "sha256": "3ee86fa8c28840698876cf6672e26dca516bdc052588df9475a65806836b888a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with unchanged W/L and bias current, gm stays approximately constant, while doubling L reduces channel-length modulation and approximately doubles ro. The stated bias assumption is consistent with the golden solution; the extra practical tradeoffs do not affect the answer.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 1735,
        "total_tokens": 1753,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1074,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 1735,
        "total_tokens": 1753,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1074,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, the intrinsic gain **doubles** (increases by a factor of 2), assuming the drain current ($I_D$) remains constant.\n\nHere is the step-by-step breakdown of why this happens:\n\n### 1. The Formula for Intrinsic Gain\nThe intrinsic gain ($A_v$) of a MOSFET is defined as the product of its transconductance ($g_m$) and its output resistance ($r_o$):\n$$A_v = g_m \\cdot r_o$$\n\n### 2. Effect on Transconductance ($g_m$)\nThe formula for transconductance in saturation is:\n$$g_m = \\sqrt{2\\mu C_{ox} \\frac{W}{L} I_D}$$\nWhen you double both $W$ and $L$:\n*   The ratio $\\frac{W}{L}$ becomes $\\frac{2W}{2L}$, which is the same as $\\frac{W}{L}$.\n*   Since the ratio $\\frac{W}{L}$ and the current $I_D$ are unchanged, **$g_m$ remains constant.**\n\n### 3. Effect on Output Resistance ($r_o$)\nThe output resistance is determined by Channel Length Modulation ($\\lambda$):\n$$r_o = \\frac{1}{\\lambda I_D}$$\nThe channel length modulation parameter $\\lambda$ is inversely proportional to the length of the channel ($L$):\n$$\\lambda \\propto \\frac{1}{L}$$\nTherefore, $r_o$ is directly proportional to $L$:\n$$r_o \\approx \\frac{V_A \\cdot L}{I_D}$$\n(where $V_A$ is the Early voltage per unit length).\n*   When you double the length ($L \\to 2L$), the output resistance **doubles**.\n\n### 4. Final Calculation\n$$A_{v(new)} = g_{m(same)} \\times r_{o(doubled)}$$\n$$A_{v(new)} = 2 \\times A_{v(old)}$$\n\n---\n\n### Summary Table\n| Parameter | Change | Reason |\n| :--- | :--- | :--- |\n| **Width ($W$)** | $2 \\times$ | Given |\n| **Length ($L$)** | $2 \\times$ | Given |\n| **$W/L$ Ratio** | No change | $2W / 2L = W/L$ |\n| **Transconductance ($g_m$)** | No change | Depends on $W/L$ ratio and $I_D$ |\n| **Output Resistance ($r_o$)** | **$2 \\times$** | Proportional to $L$ |\n| **Intrinsic Gain ($A_v$)** | **$2 \\times$** | $g_m \\times r_o$ |\n\n### Why do designers do this?\nIn analog IC design, if you need more gain from a single transistor stage but don't want to change the power consumption (current) or the biasing physics (overdrive voltage), doubling both $W$ and $L$ is a standard way to increase gain at the expense of **increased area** and **higher parasitic capacitance** (which slows down the circuit).",
        "format": "markdown",
        "sha256": "c64bd98893575eadde5c09dde12eb26ebb44c6c6355f37992239275cea4b0bc3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions leaves W/L and, at the stated constant-current bias, gm unchanged, while longer L approximately doubles ro and thus intrinsic gain. This matches the golden solution.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 1713,
        "total_tokens": 1731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 993,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 1713,
        "total_tokens": 1731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 993,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct.**\n\nIn the standard square-law model for a MOSFET operating in the **saturation region**, the transconductance ($g_m$) is directly proportional to the overdrive voltage ($V_{OV}$).\n\n### The Mathematical Proof\nThe drain current ($I_D$) in saturation is given by:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n\nSince overdrive voltage is defined as $V_{OV} = V_{GS} - V_{th}$, we can write:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} V_{OV}^2$$\n\nTransconductance ($g_m$) is defined as the derivative of the drain current with respect to the gate-source voltage:\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}}$$\n\nDifferentiating the saturation current equation gives:\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})$$\nor\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$$\n\n### Conclusion\nAs you can see from the final formula, if the physical dimensions of the transistor ($W$ and $L$) and the process parameters ($\\mu_n$ and $C_{ox}$) remain constant, **increasing the overdrive voltage ($V_{OV}$) linearly increases the transconductance ($g_m$).**\n\n---\n\n### A Note on Why Student B Might Be Confused\nStudent B might be thinking of a different scenario involving **constant current**. \n\nThere are three common ways to express $g_m$:\n1.  **Fixed $W/L$:** $g_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$ (Here, $g_m \\propto V_{OV}$) — **Student A is correct.**\n2.  **Fixed $I_D$ and $V_{OV}$:** $g_m = \\sqrt{2 \\mu_n C_{ox} \\frac{W}{L} I_D}$\n3.  **Fixed $I_D$:** $g_m = \\frac{2I_D}{V_{OV}}$ (Here, $g_m \\propto 1/V_{OV}$)\n\nIf you are designing a circuit and you have a **fixed power budget (fixed $I_D$)**, increasing the overdrive voltage (by making the transistor smaller) actually **decreases** the transconductance. However, in the context of a single transistor where you are simply turning up the gate voltage, Student A's logic holds true.",
        "format": "markdown",
        "sha256": "86a3391d4db906725ff431b898170077b6ea15fa8a706bf9752b9735e4ed66b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size and derives that gm increases linearly with VOV. It also appropriately notes that at fixed ID, gm decreases as VOV rises.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1675,
        "total_tokens": 1704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1068,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1675,
        "total_tokens": 1704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1068,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct.**\n\nIn the saturation region (where MOSFETs are typically operated for amplification), the transconductance ($g_m$) increases as the overdrive voltage ($V_{ov}$) increases.\n\n### The Mathematical Proof\nThe standard square-law equation for the drain current ($I_D$) of a MOSFET in saturation is:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n\nSince the overdrive voltage is defined as $V_{ov} = V_{GS} - V_{th}$, we can write:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} V_{ov}^2$$\n\nTransconductance ($g_m$) is defined as the derivative of the drain current with respect to the gate-source voltage:\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}}$$\n\nDifferentiating the current equation with respect to $V_{GS}$ gives:\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})$$\nor\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} V_{ov}$$\n\n### Conclusion\nFrom this formula, you can see that **$g_m$ is directly proportional to $V_{ov}$**. \n*   If $V_{ov}$ increases, $g_m$ increases.\n*   If $V_{ov}$ decreases, $g_m$ decreases.\n\n**Why Student B might be confused:**\nStudent B might be thinking of a different scenario where the **Drain Current ($I_D$) is held constant**. If you keep $I_D$ fixed and increase the overdrive voltage (by changing the $W/L$ ratio of the transistor), the transconductance actually goes **down** ($g_m = 2I_D / V_{ov}$). However, in a standard circuit where the physical dimensions of the transistor are fixed, increasing $V_{ov}$ always increases $g_m$.",
        "format": "markdown",
        "sha256": "848eb7ae122bf35b0d9986034a54cbced93aa092815cd1598ffc1a2824cb5b56"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed W/L, derives that gm increases linearly with Vov, and explains that Student B’s decreasing-gm result applies when ID is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1373,
        "total_tokens": 1402,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 902,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1373,
        "total_tokens": 1402,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 902,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct.**\n\nIn the standard saturation model for a MOSFET (the square-law model), the transconductance ($g_m$) increases as the overdrive voltage ($V_{ov}$) increases.\n\n### The Mathematical Proof\nThe drain current ($I_D$) of a MOSFET in the saturation region is given by:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n\nWhere $(V_{GS} - V_{th})$ is the **overdrive voltage ($V_{ov}$)**.\n\nTransconductance is defined as the derivative of the drain current with respect to the gate-source voltage:\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}}$$\n\nTaking the derivative of the saturation current equation:\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})$$\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} V_{ov}$$\n\n### Conclusion\nAs shown in the formula above, **$g_m$ is directly proportional to $V_{ov}$**. Therefore, if you increase the overdrive voltage, the transconductance goes up.\n\n***\n\n### A Note on Real-World Nuance (Why Student B might be confused)\nWhile Student A is correct according to basic theory, Student B might be thinking of **efficiency** or **short-channel effects**:\n\n1.  **Transconductance Efficiency ($g_m/I_D$):** If you look at the ratio of transconductance to drain current ($g_m/I_D = 2/V_{ov}$), that value **decreases** as overdrive voltage increases. This is a common metric in low-power design.\n2.  **Mobility Degradation:** In modern, very small transistors, as $V_{GS}$ becomes very high, the strong vertical electric field pushes carriers against the oxide interface, reducing their mobility. This can cause $g_m$ to level off or even slightly decrease at extremely high overdrive voltages.\n\nHowever, in the context of a standard electronics or physics course, **Student A is the one providing the correct fundamental relationship.**",
        "format": "markdown",
        "sha256": "0960e390da518103fcc3444f3f29d72a97b729f81453a1ce5cb95c046052e592"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A for a fixed device size and derives that gm is proportional to Vov in the square-law saturation model. The added efficiency and mobility notes do not contradict the central answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1366,
        "total_tokens": 1395,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 873,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 1366,
        "total_tokens": 1395,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 873,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is **yes, the structure (topology) of the small-signal model is identical** for both NMOS and PMOS devices. However, there are important differences in the **numerical values** of the parameters and the **physical interpretation** of the polarities.\n\nHere is a detailed breakdown of the similarities and differences.\n\n---\n\n### 1. The Model Topology (The \"Hybrid-$\\pi$\" Model)\nIn small-signal analysis, we look at how the device responds to small fluctuations around a DC operating point. For both NMOS and PMOS, the low-frequency model consists of:\n*   An open circuit between the **Gate** and **Source** (at low frequencies).\n*   A dependent current source between the **Drain** and **Source** ($g_m v_{gs}$).\n*   An output resistance ($r_o$) in parallel with the current source.\n\n**Visually, the diagrams are exactly the same.** You do not need to \"flip\" the current source arrow for a PMOS in a small-signal diagram if you follow standard labeling conventions ($v_{gs}$ and $i_d$ from Drain to Source).\n\n### 2. Transconductance ($g_m$)\nThe formula for $g_m$ is functionally the same, but the physical constants differ:\n*   **NMOS:** $g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th,n})$\n*   **PMOS:** $g_m = \\mu_p C_{ox} \\frac{W}{L} |V_{GS} - V_{th,p}|$ (or $\\mu_p C_{ox} \\frac{W}{L} V_{OV}$)\n\n**The Difference:** Because the mobility of electrons ($\\mu_n$) is typically 2 to 3 times higher than the mobility of holes ($\\mu_p$), an NMOS device will have a much higher $g_m$ than a PMOS device of the same physical size and bias current.\n\n### 3. Polarities and Sign Conventions\nThis is where students often get confused. \n*   **NMOS:** An increase in $v_g$ (making $v_{gs}$ more positive) increases the drain current.\n*   **PMOS:** An increase in $v_g$ (making $v_{gs}$ **less** negative, or $v_{sg}$ smaller) **decreases** the drain current.\n\n**However**, in small-signal modeling, we define $v_{gs}$ as the signal. If you use the PMOS model with the current source pointing from Drain to Source and label it $g_m v_{gs}$, the math works out identically to the NMOS. \n*   *Note:* Some textbooks prefer to use $v_{sg}$ for PMOS to keep values positive, which flips the arrow direction. But if you stick to a unified $v_{gs}$ convention, the models are identical.\n\n### 4. Output Resistance ($r_o$)\nThe formula is the same for both:\n$$r_o = \\frac{1}{\\lambda I_D} = \\frac{V_A}{I_D}$$\nWhile the formula is identical, the Channel Length Modulation coefficient ($\\lambda$) or the Early Voltage ($V_A$) will differ based on the fabrication process for N-type vs. P-type materials.\n\n### 5. Capacitances (High-Frequency Model)\nThe parasitic capacitances ($C_{gs}$, $C_{gd}$, $C_{db}$, $C_{sb}$) exist in both models in the exact same positions. Again, the specific values will differ because the depletion widths and junction areas differ between N-doped and P-doped regions.\n\n---\n\n### Summary Table\n\n| Feature | NMOS Small-Signal | PMOS Small-Signal |\n| :--- | :--- | :--- |\n| **Circuit Symbol** | Same (Hybrid-$\\pi$) | Same (Hybrid-$\\pi$) |\n| **Current Source** | $g_m v_{gs}$ | $g_m v_{gs}$ (or $g_m v_{sg}$ if flipped) |\n| **$g_m$ Magnitude** | Higher (due to $\\mu_n$) | Lower (due to $\\mu_p$) |\n| **$r_o$ Calculation** | $1 / (\\lambda_n I_D)$ | $1 / (\\lambda_p I_D)$ |\n| **Body Effect ($g_{mb}$)** | Same topology | Same topology |\n\n### Conclusion\nWhen you are drawing a small-signal equivalent circuit for a complex amplifier, **you treat the PMOS exactly like an NMOS.** You replace the device with the same three-terminal model (Gate, Drain, Source). The only thing that changes is the specific numbers you plug in for $g_m$ and $r_o$ during the final calculation.",
        "format": "markdown",
        "sha256": "2589ada21ec39bc8dbe91ae184c54da893f1135fdb2ff025f5940a00584e57dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form and topology as the NMOS model. The additional parameter and polarity discussion does not change the essential answer.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 1994,
        "total_tokens": 2014,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 937,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 1994,
        "total_tokens": 2014,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 937,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is **yes, the structure (topology) of the small-signal model is identical** for both NMOS and PMOS devices. However, there are important differences in the **numerical values** of the parameters and the **physical interpretation** of the polarities.\n\nHere is a detailed breakdown of the similarities and differences.\n\n---\n\n### 1. The Model Topology (The \"Hybrid-$\\pi$\" Model)\nIn small-signal analysis, we look at how the device responds to small fluctuations around a DC operating point. For both NMOS and PMOS, the low-frequency model consists of:\n*   An open circuit between the **Gate** and **Source** (at low frequencies).\n*   A dependent current source between the **Drain** and **Source** ($g_m v_{gs}$).\n*   An output resistance ($r_o$) in parallel with the current source.\n\n**Visually, the diagrams are exactly the same.** You do not need to \"flip\" the current source arrow for a PMOS in a small-signal diagram if you follow standard labeling conventions ($v_{gs}$ and $i_d$ from Drain to Source).\n\n### 2. Transconductance ($g_m$)\nThe formula for $g_m$ is functionally the same, but the physical constants differ:\n*   **NMOS:** $g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th,n})$\n*   **PMOS:** $g_m = \\mu_p C_{ox} \\frac{W}{L} |V_{GS} - V_{th,p}|$ (or $\\mu_p C_{ox} \\frac{W}{L} V_{OV}$)\n\n**The Difference:** Because the mobility of electrons ($\\mu_n$) is typically 2 to 3 times higher than the mobility of holes ($\\mu_p$), an NMOS device will have a much higher $g_m$ than a PMOS device of the same physical size and bias current.\n\n### 3. Polarities and Sign Conventions\nThis is where students often get confused. \n*   **NMOS:** An increase in $v_g$ (making $v_{gs}$ more positive) increases the drain current.\n*   **PMOS:** An increase in $v_g$ (making $v_{gs}$ **less** negative, or $v_{sg}$ smaller) **decreases** the drain current.\n\n**However**, in small-signal modeling, we define $v_{gs}$ as the signal. If you use the PMOS model with the current source pointing from Drain to Source and label it $g_m v_{gs}$, the math works out identically to the NMOS. \n*   *Note:* Some textbooks prefer to use $v_{sg}$ for PMOS to keep values positive, which flips the arrow direction. But if you stick to a unified $v_{gs}$ convention, the models are identical.\n\n### 4. Output Resistance ($r_o$)\nThe formula is the same for both:\n$$r_o = \\frac{1}{\\lambda I_D} = \\frac{V_A}{I_D}$$\nWhile the formula is identical, the Channel Length Modulation coefficient ($\\lambda$) or the Early Voltage ($V_A$) will differ based on the fabrication process for N-type vs. P-type materials.\n\n### 5. Capacitances (High-Frequency Model)\nThe parasitic capacitances ($C_{gs}$, $C_{gd}$, $C_{db}$, $C_{sb}$) exist in both models in the exact same positions. Again, the specific values will differ because the depletion widths and junction areas differ between N-doped and P-doped regions.\n\n---\n\n### Summary Table\n\n| Feature | NMOS Small-Signal | PMOS Small-Signal |\n| :--- | :--- | :--- |\n| **Circuit Symbol** | Same (Hybrid-$\\pi$) | Same (Hybrid-$\\pi$) |\n| **Current Source** | $g_m v_{gs}$ | $g_m v_{gs}$ (or $g_m v_{sg}$ if flipped) |\n| **$g_m$ Magnitude** | Higher (due to $\\mu_n$) | Lower (due to $\\mu_p$) |\n| **$r_o$ Calculation** | $1 / (\\lambda_n I_D)$ | $1 / (\\lambda_p I_D)$ |\n| **Body Effect ($g_{mb}$)** | Same topology | Same topology |\n\n### Conclusion\nWhen you are drawing a small-signal equivalent circuit for a complex amplifier, **you treat the PMOS exactly like an NMOS.** You replace the device with the same three-terminal model (Gate, Drain, Source). The only thing that changes is the specific numbers you plug in for $g_m$ and $r_o$ during the final calculation.",
        "format": "markdown",
        "sha256": "2589ada21ec39bc8dbe91ae184c54da893f1135fdb2ff025f5940a00584e57dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form and topology as the NMOS model. The additional parameter and polarity discussion does not change the essential answer.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 1994,
        "total_tokens": 2014,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 937,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 1994,
        "total_tokens": 2014,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 937,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is **yes**. In terms of their circuit topology and the mathematical equations used for analysis, the small-signal models for PMOS and NMOS devices are **identical**.\n\nHowever, there are important nuances regarding the direction of current, the polarity of voltages, and the physical parameter values.\n\n---\n\n### 1. The Hybrid-$\\pi$ Model\nFor both NMOS and PMOS, the basic small-signal model (ignoring high-frequency capacitances for a moment) consists of:\n*   A **Voltage-Controlled Current Source**: $g_m v_{gs}$\n*   An **Output Resistance**: $r_o$ (due to channel length modulation)\n*   An optional **Body Effect Source**: $g_{mb} v_{bs}$\n\nIn a standard small-signal diagram, you draw the Gate, Drain, and Source. Even for a PMOS, the current source is typically drawn pointing from **Drain to Source**, and the controlling voltage is $v_{gs}$.\n\n### 2. Why are they the same?\nSmall-signal analysis deals with **increments** (changes) around a DC operating point. \n*   In an **NMOS**, an increase in $V_G$ increases the current.\n*   In a **PMOS**, a decrease in $V_G$ (making it more negative relative to the source) increases the current.\n\nWhen you linearize the equations:\n*   **NMOS:** $i_d = g_m (v_g - v_s)$\n*   **PMOS:** $i_d = g_m (v_s - v_g)$\n\nBecause the PMOS is physically \"upside down\" in a circuit compared to an NMOS (the Source is usually at a higher potential than the Drain), the signs effectively cancel out when you perform Nodal Analysis. Therefore, engineers use the **exact same schematic symbol** for the small-signal model of both devices to avoid confusion.\n\n### 3. The Differences (The \"Fine Print\")\nWhile the **model structure** is identical, the **values** and **physical behavior** differ:\n\n#### A. Mobility ($\\mu$)\nThe most significant difference is that electrons (NMOS) are more mobile than holes (PMOS).\n*   $\\mu_n \\approx 2$ to $3 \\times \\mu_p$.\n*   This means that for the same device dimensions ($W/L$), an **NMOS will have a much higher transconductance ($g_m$)** than a PMOS. To match the performance of an NMOS, a PMOS must be made physically larger.\n\n#### B. The Body Effect ($g_{mb}$)\n*   In an **NMOS**, the body (substrate) is usually connected to the lowest potential (GND or $V_{SS}$).\n*   In a **PMOS**, the body (n-well) is usually connected to the highest potential ($V_{DD}$).\n*   While the model $g_{mb} v_{bs}$ is the same, the reference point for the \"Body\" terminal in your circuit schematic will be different.\n\n#### C. Capacitances\nBecause PMOS devices are often made larger to compensate for lower mobility, they typically have larger parasitic capacitances ($C_{gs}$, $C_{gd}$) than an NMOS with equivalent current-driving capability.\n\n### Summary Table\n| Feature | NMOS Small-Signal | PMOS Small-Signal |\n| :--- | :--- | :--- |\n| **Model Topology** | Identical | Identical |\n| **Current Source** | $g_m v_{gs}$ | $g_m v_{gs}$ (or $g_m v_{sg}$ if flipped) |\n| **Transconductance** | $g_m = \\sqrt{2\\mu_n C_{ox} \\frac{W}{L} I_D}$ | $g_m = \\sqrt{2\\mu_p C_{ox} \\frac{W}{L} I_D}$ |\n| **Output Resistance** | $r_o = \\frac{1}{\\lambda I_D}$ | $r_o = \\frac{1}{\\lambda I_D}$ |\n| **Mobility** | Higher ($\\mu_n$) | Lower ($\\mu_p$) |\n\n**Conclusion:** When you are drawing the small-signal equivalent circuit for a complex amplifier, you can treat the PMOS exactly like an NMOS. The DC differences are \"absorbed\" into the values of $g_m$ and $r_o$.",
        "format": "markdown",
        "sha256": "202a9a071e3b4af75fa599bf71cdf126a7ae875d40c44c65e2ceb8995f255852"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer correctly says the PMOS small-signal model is the same in form as the NMOS model. Its discussion of polarity conventions and parameter differences is supplementary; the golden solution explicitly awards full credit for this conclusion.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 1859,
        "total_tokens": 1879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 883,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 1859,
        "total_tokens": 1879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 883,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the $I_X$ versus $V_X$ characteristic for the given circuit, we need to analyze the operating state of the NMOS transistor $M_1$.\n\n### 1. Circuit Analysis\n* **Configuration:** The transistor $M_1$ is in a **diode-connected** configuration because its gate and drain are tied together.\n* **Voltages:** \n    * The source is grounded, so $V_S = 0$.\n    * The gate and drain are both connected to the voltage source $V_X$, so $V_G = V_D = V_X$.\n    * Therefore, the gate-to-source voltage is $V_{GS} = V_X - 0 = V_X$.\n    * The drain-to-source voltage is $V_{DS} = V_X - 0 = V_X$.\n* **Current:** The current $I_X$ provided by the source is equal to the drain current $I_D$ of the transistor (assuming zero gate current).\n\n### 2. Operating Regions\nThe behavior of the NMOS transistor depends on the value of $V_X$ relative to its threshold voltage $V_{TH}$:\n\n* **Cutoff Region ($V_X < V_{TH}$):**\n  If the applied voltage $V_X$ is less than the threshold voltage $V_{TH}$, the transistor is off.\n  $$I_X = 0$$\n\n* **Saturation Region ($V_X \\ge V_{TH}$):**\n  For a diode-connected transistor, the condition for saturation is $V_{DS} \\ge V_{GS} - V_{TH}$. \n  Substituting our values: $V_X \\ge V_X - V_{TH}$, which simplifies to $0 \\ge -V_{TH}$ or $V_{TH} \\ge 0$. Since $V_{TH}$ is positive for an enhancement-mode NMOS, the transistor is **always in saturation** whenever it is turned on ($V_X \\ge V_{TH}$).\n  The current in saturation (ignoring channel length modulation) is given by:\n  $$I_X = I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2$$\n  $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n  This shows a **quadratic (parabolic)** relationship between $I_X$ and $V_X$.\n\n### 3. Sketching the Graph\nThe resulting graph of $I_X$ vs. $V_X$ will have the following features:\n1. For $V_X < V_{TH}$, the current $I_X$ is zero (a flat line on the x-axis).\n2. At $V_X = V_{TH}$, the current begins to rise.\n3. For $V_X > V_{TH}$, the curve follows a parabolic path upward.\n\n**The sketch would look like this:**\n\n```text\n      IX ^\n         |          /\n         |         / (Quadratic curve: IX ∝ (VX - VTH)²)\n         |        /\n         |       /\n         |      /\n --------+-----+------------> VX\n         0    VTH\n```",
        "format": "markdown",
        "sha256": "4f0d5b0b62a3a791f970fdfba5a3f633acb0b0c814dc853e6bc4b65c91daf88f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold, and derives the quadratic current rise above threshold. This matches the full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 1675,
        "total_tokens": 2790,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 929,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 1675,
        "total_tokens": 2790,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 929,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the $I_X$ versus $V_X$ characteristic for the given circuit, we need to analyze the operating regions of the NMOS transistor $M_1$.\n\n### 1. Circuit Analysis\n*   **Configuration:** The transistor $M_1$ is in a **diode-connected** configuration because its gate and drain are tied together.\n*   **Voltages:** \n    *   The gate-source voltage is $V_{GS} = V_X - 0 = V_X$.\n    *   The drain-source voltage is $V_{DS} = V_X - 0 = V_X$.\n*   **Current:** The current $I_X$ is the drain current of the transistor, so $I_X = I_D$.\n\n### 2. Operating Regions\nAn NMOS transistor operates in different regions based on $V_{GS}$ and $V_{DS}$:\n\n*   **Cut-off Region:** If $V_{GS} < V_{TH}$ (where $V_{TH}$ is the threshold voltage), the transistor is OFF.\n    *   Condition: $V_X < V_{TH}$\n    *   Current: $I_X = 0$\n*   **Saturation Region:** For the transistor to be ON, we need $V_{GS} \\ge V_{TH}$. For it to be in saturation, we need $V_{DS} \\ge V_{GS} - V_{TH}$.\n    *   Substituting our values: $V_X \\ge V_X - V_{TH}$, which simplifies to $V_{TH} \\ge 0$.\n    *   Since $V_{TH}$ is positive for an enhancement-mode NMOS, a diode-connected transistor is **always in saturation** whenever it is ON ($V_X \\ge V_{TH}$).\n    *   Current equation (neglecting channel-length modulation):\n        $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2 = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n    *   This shows a **quadratic (parabolic)** relationship between $I_X$ and $V_X$.\n\n### 3. Sketching the Graph\nBased on the analysis above, the sketch of $I_X$ vs. $V_X$ will have the following features:\n1.  For $V_X$ from $0$ to $V_{TH}$, the current $I_X$ remains at **zero**.\n2.  At $V_X = V_{TH}$, the transistor turns on.\n3.  For $V_X > V_{TH}$, the current $I_X$ increases **quadratically**, forming a parabolic curve that opens upwards.\n\n**Sketch:**\n\n```text\n      IX ^\n         |          /\n         |         /  (Parabolic: IX ∝ (VX - VTH)²)\n         |        /\n         |       /\n         |      /\n         |_____/________________> VX\n         0    VTH\n```",
        "format": "markdown",
        "sha256": "8b2bfaf3583ee13048e9800421d4a6873617b6ca1aec162a4b8c0d886fcaf816"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold, and a quadratic current rise above threshold.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 2037,
        "total_tokens": 3152,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1337,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 2037,
        "total_tokens": 3152,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1337,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the $I_X$ versus $V_X$ characteristic for the given circuit, we need to analyze the operating state of the NMOS transistor $M_1$.\n\n### 1. Circuit Analysis\n* **Configuration:** The gate (G) and drain (D) of the NMOS transistor $M_1$ are connected together. This is known as a **diode-connected** configuration.\n* **Voltages:** \n    * The source (S) is grounded, so $V_S = 0$.\n    * The gate and drain are both connected to the voltage source $V_X$, so $V_G = V_D = V_X$.\n    * Therefore, $V_{GS} = V_X - 0 = V_X$ and $V_{DS} = V_X - 0 = V_X$.\n* **Current:** Since the gate current of a MOSFET is ideally zero, the current $I_X$ from the source is equal to the drain current $I_D$ of the transistor ($I_X = I_D$).\n\n### 2. Operating Regions\nThe transistor's behavior depends on the value of $V_X$ relative to its threshold voltage $V_{TH}$:\n\n*   **Cutoff Region ($V_X < V_{TH}$):**\n    If the gate-source voltage $V_{GS}$ is less than the threshold voltage $V_{TH}$, the transistor is off.\n    $$I_X = I_D = 0$$\n\n*   **Saturation Region ($V_X \\ge V_{TH}$):**\n    For a transistor to be in saturation, it must satisfy $V_{DS} \\ge V_{GS} - V_{TH}$. \n    In this circuit, $V_{DS} = V_{GS} = V_X$. Since $V_X \\ge V_X - V_{TH}$ (assuming $V_{TH} > 0$), the transistor is **always in saturation** whenever it is turned on.\n    The current equation for saturation (neglecting channel-length modulation) is:\n    $$I_X = I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2$$\n    Substituting $V_{GS} = V_X$:\n    $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n\n### 3. Sketching the Characteristic\nThe relationship between $I_X$ and $V_X$ is a quadratic (parabolic) curve that starts at $V_{TH}$:\n1.  For $V_X$ from $0$ to $V_{TH}$, the current $I_X$ remains at **zero**.\n2.  At $V_X = V_{TH}$, the transistor turns on.\n3.  For $V_X > V_{TH}$, the current $I_X$ increases **quadratically** with $V_X$.\n\n**The resulting sketch looks like this:**\n\n*   **X-axis:** $V_X$\n*   **Y-axis:** $I_X$\n*   A flat line on the x-axis from $0$ to $V_{TH}$.\n*   An upward-opening parabola starting from $(V_{TH}, 0)$.\n\n```text\n      IX ^\n         |          /\n         |         / (Quadratic: IX ~ (VX - VTH)^2)\n         |        /\n         |       /\n         |      /\n         |_____/________________> VX\n         0    VTH\n```",
        "format": "markdown",
        "sha256": "14f3e734784aa5003dade54d0eee19f4a2f4a66b798d8cc664bd99319cd712cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its cutoff and saturation behavior, and the zero-then-quadratic IX-versus-VX characteristic.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 1723,
        "total_tokens": 2838,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 910,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 1723,
        "total_tokens": 2838,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 910,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the relationship between $I_X$ and $V_X$ for the given circuit, we need to analyze the operating regions of the NMOS transistor $M_1$.\n\n### 1. Circuit Analysis\n*   **Gate Voltage ($V_G$):** Connected to the voltage source $V_X$, so $V_G = V_X$.\n*   **Source Voltage ($V_S$):** Connected to ground, so $V_S = 0\\text{ V}$.\n*   **Drain Voltage ($V_D$):** Connected to a $1\\text{ V}$ source, so $V_D = 1\\text{ V}$.\n*   **Gate-Source Voltage ($V_{GS}$):** $V_{GS} = V_G - V_S = V_X$.\n*   **Drain-Source Voltage ($V_{DS}$):** $V_{DS} = V_D - V_S = 1\\text{ V}$.\n*   **Current ($I_X$):** The current $I_X$ flows from the $1\\text{ V}$ source into the drain, so $I_X = I_D$ (the drain current).\n\nLet $V_{TH}$ be the threshold voltage of the NMOS transistor.\n\n### 2. Operating Regions of $M_1$\nThe transistor's behavior depends on the value of $V_X$ relative to $V_{TH}$ and the fixed $V_{DS} = 1\\text{ V}$.\n\n*   **Cutoff Region ($V_X < V_{TH}$):**\n    The transistor is off. No current flows.\n    $$I_X = 0$$\n\n*   **Saturation Region ($V_X \\ge V_{TH}$ and $V_{DS} \\ge V_{GS} - V_{TH}$):**\n    Substituting our values: $1 \\ge V_X - V_{TH} \\implies V_X \\le 1 + V_{TH}$.\n    In this region, the current follows a square-law relationship:\n    $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n    This is a **parabolic** curve starting from zero at $V_X = V_{TH}$.\n\n*   **Triode (Linear) Region ($V_X > 1 + V_{TH}$):**\n    Here, $V_{DS} < V_{GS} - V_{TH}$ because $1 < V_X - V_{TH}$.\n    The current equation is:\n    $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_{TH})V_{DS} - \\frac{1}{2} V_{DS}^2 \\right]$$\n    Substituting $V_{DS} = 1\\text{ V}$:\n    $$I_X = \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH} - 0.5)$$\n    This is a **linear** relationship with respect to $V_X$.\n\n### 3. Summary for Sketching\nThe graph of $I_X$ vs. $V_X$ consists of three parts:\n1.  **From $V_X = 0$ to $V_{TH}$:** $I_X$ is a flat line at **zero**.\n2.  **From $V_X = V_{TH}$ to $1 + V_{TH}$:** $I_X$ increases **quadratically** (parabola opening upwards).\n3.  **For $V_X > 1 + V_{TH}$:** $I_X$ increases **linearly**. The transition at $V_X = 1 + V_{TH}$ is smooth, meaning both the value and the slope of the curve are continuous at this point.\n\n### Sketch Description\n*   **X-axis:** $V_X$\n*   **Y-axis:** $I_X$\n*   The curve stays on the x-axis until it reaches $V_{TH}$.\n*   At $V_{TH}$, it begins to curve upward like a parabola.\n*   At $V_X = 1 + V_{TH}$, the curve stops bending and continues as a straight line with a positive slope.\n\nBelow is a conceptual representation of the sketch:\n\n```text\n      IX ^\n         |                / (Linear region)\n         |               /\n         |           _--' (Saturation region)\n         |        _-'\n         |      -'\n_________|______|_______|________> VX\n         0     VTH    1+VTH\n```",
        "format": "markdown",
        "sha256": "6e9244617290c51e7f9a160944442401b3c7168d8fb363ff595dc5a1911eae3e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, quadratic saturation current from VTH to VTH + 1 V, and a linear triode-region rise beyond that point.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 3521,
        "total_tokens": 4613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2475,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 3521,
        "total_tokens": 4613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2475,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the relationship between $I_X$ and $V_X$ for the given circuit, we need to analyze the operating regions of the NMOS transistor $M_1$.\n\n### 1. Circuit Analysis\nFrom the circuit diagram, we can identify the voltages at the terminals of the NMOS transistor:\n*   **Gate voltage ($V_G$):** Connected to the voltage source $V_X$, so $V_G = V_X$.\n*   **Source voltage ($V_S$):** Connected to ground, so $V_S = 0$.\n*   **Drain voltage ($V_D$):** Connected to a $1\\text{ V}$ source, so $V_D = 1\\text{ V}$.\n\nFrom these, we can determine the gate-source voltage ($V_{GS}$) and the drain-source voltage ($V_{DS}$):\n*   $V_{GS} = V_G - V_S = V_X$\n*   $V_{DS} = V_D - V_S = 1\\text{ V}$\n\nThe current $I_X$ is the current flowing into the drain of the transistor, so $I_X = I_D$.\n\n### 2. Operating Regions\nThe behavior of $I_X$ depends on the value of $V_X$ relative to the threshold voltage ($V_{th}$) of the transistor and the fixed drain-source voltage ($V_{DS} = 1\\text{ V}$).\n\n*   **Cutoff Region ($V_X < V_{th}$):**\n    When the gate voltage is less than the threshold voltage, the transistor is off.\n    $$I_X = 0$$\n\n*   **Saturation Region ($V_{th} \\le V_X \\le V_{th} + 1\\text{ V}$):**\n    The transistor is in saturation when $V_{GS} \\ge V_{th}$ and $V_{DS} \\ge V_{GS} - V_{th}$.\n    Substituting our values: $1 \\ge V_X - V_{th} \\implies V_X \\le V_{th} + 1\\text{ V}$.\n    In this region, the current follows a square-law relationship:\n    $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{th})^2$$\n    This results in a **parabolic** increase of current with $V_X$.\n\n*   **Triode (Linear) Region ($V_X > V_{th} + 1\\text{ V}$):**\n    The transistor enters the triode region when $V_{DS} < V_{GS} - V_{th}$, which means $1 < V_X - V_{th} \\implies V_X > V_{th} + 1\\text{ V}$.\n    The current equation is:\n    $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_{th})V_{DS} - \\frac{1}{2} V_{DS}^2 \\right]$$\n    Substituting $V_{DS} = 1\\text{ V}$:\n    $$I_X = \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{th} - 0.5)$$\n    In this region, $I_X$ increases **linearly** with $V_X$.\n\n### 3. Sketching the Graph\nThe plot of $I_X$ versus $V_X$ will have three distinct parts:\n1.  **From $0$ to $V_{th}$:** $I_X$ stays at zero.\n2.  **From $V_{th}$ to $V_{th} + 1\\text{ V}$:** $I_X$ rises quadratically (parabolic curve).\n3.  **For $V_X > V_{th} + 1\\text{ V}$:** $I_X$ continues to rise but as a straight line. The transition between the parabolic and linear sections is smooth because the slopes match at $V_X = V_{th} + 1\\text{ V}$.\n\n**The resulting sketch looks like this:**\n\n| $V_X$ Range | Region | $I_X$ vs $V_X$ Characteristic |\n| :--- | :--- | :--- |\n| $V_X < V_{th}$ | Cutoff | Flat line at $0$ |\n| $V_{th} < V_X < V_{th} + 1$ | Saturation | Upward-opening parabola |\n| $V_X > V_{th} + 1$ | Triode | Straight line with positive slope |",
        "format": "markdown",
        "sha256": "d0c86baa81e278dc8b08c80ea56146e84719599283834f4cd0fb29463325a78f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions and gives the required quadratic rise up to VTH + 1 V followed by a linear rise.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 3082,
        "total_tokens": 4174,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2026,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 3082,
        "total_tokens": 4174,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2026,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the relationship between $I_X$ and $V_X$ for the given circuit, we need to analyze the operating regions of the NMOS transistor $M_1$.\n\n### 1. Circuit Analysis\n*   **Gate Voltage ($V_G$):** The gate is connected to the voltage source $V_X$, so $V_G = V_X$.\n*   **Source Voltage ($V_S$):** The source is grounded, so $V_S = 0$.\n*   **Gate-Source Voltage ($V_{GS}$):** $V_{GS} = V_G - V_S = V_X$.\n*   **Drain Voltage ($V_D$):** The drain is connected to a $1\\text{ V}$ source, so $V_D = 1\\text{ V}$.\n*   **Drain-Source Voltage ($V_{DS}$):** $V_{DS} = V_D - V_S = 1\\text{ V}$.\n*   **Current ($I_X$):** The current $I_X$ flows into the drain, so $I_X = I_D$ (the drain current).\n\n### 2. Operating Regions of the NMOS\nLet $V_{TH}$ be the threshold voltage of the transistor. The behavior of $I_X$ depends on $V_X$ relative to $V_{TH}$ and the drain-source voltage $V_{DS} = 1\\text{ V}$.\n\n*   **Region 1: Cutoff ($V_X < V_{TH}$)**\n    The transistor is off, and no current flows.\n    $$I_X = 0$$\n\n*   **Region 2: Saturation ($V_{TH} \\le V_X \\le 1\\text{ V} + V_{TH}$)**\n    The transistor is in saturation when $V_{GS} \\ge V_{TH}$ and $V_{DS} \\ge V_{GS} - V_{TH}$. \n    Substituting our values: $1 \\ge V_X - V_{TH} \\Rightarrow V_X \\le 1 + V_{TH}$.\n    In this region, the current follows a square-law relationship:\n    $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH})^2$$\n    The current increases **parabolically** with $V_X$.\n\n*   **Region 3: Triode (Linear) ($V_X > 1\\text{ V} + V_{TH}$)**\n    The transistor enters the triode region when $V_{DS} < V_{GS} - V_{TH}$, which means $1 < V_X - V_{TH} \\Rightarrow V_X > 1 + V_{TH}$.\n    The current equation is:\n    $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_{TH})V_{DS} - \\frac{1}{2}V_{DS}^2 \\right]$$\n    Substituting $V_{DS} = 1\\text{ V}$:\n    $$I_X = \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{TH} - 0.5)$$\n    In this region, $I_X$ increases **linearly** with $V_X$.\n\n### 3. Sketch Description\nTo sketch the graph of $I_X$ vs. $V_X$:\n1.  **Horizontal Axis ($V_X$):** Mark the points $V_{TH}$ and $1 + V_{TH}$.\n2.  **From $0$ to $V_{TH}$:** The graph is a flat line at $I_X = 0$.\n3.  **From $V_{TH}$ to $1 + V_{TH}$:** The graph is a curve that starts at $(V_{TH}, 0)$ and curves upward (parabolic shape).\n4.  **For $V_X > 1 + V_{TH}$:** The graph becomes a straight line. This line is tangent to the parabola at the transition point $V_X = 1 + V_{TH}$, ensuring a smooth transition.\n\n**Visual Summary of the Sketch:**\n*   **$0 \\le V_X < V_{TH}$:** $I_X = 0$ (Flat)\n*   **$V_{TH} \\le V_X \\le V_{TH} + 1$:** $I_X \\propto (V_X - V_{TH})^2$ (Quadratic curve)\n*   **$V_X > V_{TH} + 1$:** $I_X \\propto V_X - (V_{TH} + 0.5)$ (Straight line)",
        "format": "markdown",
        "sha256": "02cf0626332fea970320928a1eeb85c98b31a02b3c592bdf964fdce1d383b70e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, a quadratic saturation-region rise up to VTH + 1 V, and a roughly linear triode-region rise beyond it, with consistent equations and a smooth transition.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 3269,
        "total_tokens": 4361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 3269,
        "total_tokens": 4361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the device **cannot** act as a current source in this configuration.\n\nHere is the technical explanation:\n\n1.  **Device Identification:** The symbol $M_1$ represents a PMOS transistor (indicated by the arrow pointing into the channel at the source terminal).\n2.  **Circuit Configuration:** Both the **Gate** and the **Drain** are connected to ground ($0\\text{V}$). The current $I_X$ is being fed into the **Source** terminal.\n3.  **Operating Principle:** For a MOSFET to act as a current source, it must have a constant gate-to-source voltage ($V_{GS}$) and operate in the saturation region to provide a high output impedance. \n4.  **Why it fails as a current source:**\n    *   In this specific setup, the gate-to-source voltage is $V_{GS} = V_G - V_S = 0 - V_X = -V_X$. \n    *   Because the gate is grounded, any change in the voltage at the source ($V_X$) directly changes the $V_{GS}$ of the transistor.\n    *   Since the current $I_X$ through a MOSFET is heavily dependent on its $V_{GS}$ (specifically, $I_X \\propto (V_{SG} - |V_{THP}|)^2$ in saturation), the current will change significantly as the voltage $V_X$ varies.\n    *   A true current source should maintain a nearly constant current regardless of the voltage across it.\n\n**Conclusion:** This configuration is known as a **diode-connected transistor**. Instead of acting as a current source, it acts like a non-linear resistor or a diode with relatively low impedance ($1/g_m$). To act as a current source, the gate would need to be connected to a constant reference voltage rather than being tied to the same ground as the drain.",
        "format": "markdown",
        "sha256": "81f157378b507cb948b31d4624815ce862ddd1a522608a79e3dc279e977b7eec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS with gate and drain grounded and current entering its source, and explains that the diode-connected device presents low impedance (about 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 2570,
        "total_tokens": 3649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 2570,
        "total_tokens": 3649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the device **cannot** act as a current source in this configuration.\n\nHere is the technical explanation:\n\n1.  **Device Identification:** The symbol $M_1$ represents a PMOS transistor (indicated by the arrow pointing into the channel at the source terminal).\n2.  **Circuit Configuration:** Both the **Gate** and the **Drain** are connected to ground ($0\\text{V}$). The current $I_X$ is being fed into the **Source** terminal.\n3.  **Operating Principle:** For a MOSFET to act as a current source, it must have a constant gate-to-source voltage ($V_{GS}$) and operate in the saturation region to provide a high output impedance. \n4.  **Why it fails as a current source:**\n    *   In this specific setup, the gate-to-source voltage is $V_{GS} = V_G - V_S = 0 - V_X = -V_X$. \n    *   Because the gate is grounded, any change in the voltage at the source ($V_X$) directly changes the $V_{GS}$ of the transistor.\n    *   Since the current $I_X$ through a MOSFET is heavily dependent on its $V_{GS}$ (specifically, $I_X \\propto (V_{SG} - |V_{THP}|)^2$ in saturation), the current will change significantly as the voltage $V_X$ varies.\n    *   A true current source should maintain a nearly constant current regardless of the voltage across it.\n\n**Conclusion:** This configuration is known as a **diode-connected transistor**. Instead of acting as a current source, it acts like a non-linear resistor or a diode with relatively low impedance ($1/g_m$). To act as a current source, the gate would need to be connected to a constant reference voltage rather than being tied to the same ground as the drain.",
        "format": "markdown",
        "sha256": "81f157378b507cb948b31d4624815ce862ddd1a522608a79e3dc279e977b7eec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS with gate and drain grounded and current entering its source, and explains that the diode-connected device presents low impedance (about 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 2570,
        "total_tokens": 3649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 2570,
        "total_tokens": 3649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the device **cannot** act as a current source. Here is the step-by-step reasoning:\n\n1.  **Identify the Device and Terminals:**\n    *   The symbol represents a **MOSFET** (specifically a PMOS transistor, indicated by the arrow on the top terminal pointing into the device, which identifies that terminal as the source).\n    *   The **Gate** is connected to ground ($V_G = 0$).\n    *   The **Drain** (bottom terminal) is also connected to ground ($V_D = 0$).\n    *   The **Source** (top terminal) is the node where the current $I_X$ enters, and it has some voltage $V_X$ relative to ground.\n\n2.  **Analyze the Configuration:**\n    *   Because both the gate and the drain are connected to the same potential (ground), this is a **diode-connected** configuration.\n    *   In a PMOS transistor, for it to conduct, the source voltage $V_X$ must be higher than the gate voltage by at least the threshold voltage ($V_{SG} > |V_{THP}|$).\n    *   Since $V_{GD} = 0$, the transistor is always in the **saturation region** whenever it is turned on (because $|V_{DS}| = V_X$ and $|V_{GS}| = V_X$, so $|V_{DS}| > |V_{GS}| - |V_{THP}|$ is always true).\n\n3.  **Evaluate as a Current Source:**\n    *   An ideal **current source** must provide a constant current regardless of the voltage across it. This requires a very high (ideally infinite) output impedance.\n    *   For this diode-connected transistor, the current $I_X$ is determined by the saturation equation:\n        $$I_X \\approx \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_X - |V_{THP}|)^2$$\n    *   As you can see, the current $I_X$ is a **quadratic function of the voltage $V_X$**. If the voltage $V_X$ changes, the current $I_X$ changes significantly.\n    *   The small-signal output resistance of this configuration is $1/g_m$ (where $g_m$ is the transconductance). This is a **low resistance**, which is the opposite of what is required for a current source.\n\n**Conclusion:**\nThe device acts as a **nonlinear resistor** (or an active load), not a current source. A current source would require the gate to be connected to a fixed bias voltage relative to the source, rather than being tied to the same reference as the drain.",
        "format": "markdown",
        "sha256": "084d591d315361044378008637d10c46b33425e3f50ba813ba20690c0125bf33"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS with its source at VX and gate and drain grounded, recognizes the diode-connected configuration, and explains that its approximately 1/gm small-signal resistance is low, so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 10204,
        "total_tokens": 11283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9600,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1079,
        "output_tokens": 10204,
        "total_tokens": 11283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9600,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Source (CS) amplifier** using a **PMOS transistor ($M_1$)** with **source degeneration** provided by resistor $R_S$.\n\n*   **Input ($V_{in}$):** Applied to the gate of the transistor.\n*   **Output ($V_{out}$):** Taken from the drain of the transistor.\n*   **Source Degeneration ($R_S$):** A resistor placed between the source and the supply voltage ($V_{DD}$).\n*   **Drain Load ($R_D$):** A resistor placed between the drain and ground.\n\n---\n\n### 2. DC Analysis (Biasing)\nTo operate as an amplifier, the transistor $M_1$ must be biased in the **saturation region**.\n*   **Source Voltage ($V_S$):** $V_S = V_{DD} - I_D R_S$\n*   **Gate Voltage ($V_G$):** $V_G = V_{in}$ (DC component)\n*   **Source-to-Gate Voltage ($V_{SG}$):** $V_{SG} = V_S - V_G = V_{DD} - I_D R_S - V_{in}$\n*   **Drain Current ($I_D$):** In saturation, $I_D \\approx \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_{SG} - |V_{thp}|)^2$\n*   **Drain Voltage ($V_D$):** $V_{out} = I_D R_D$\n\nFor saturation, the condition $V_{SD} > V_{SG} - |V_{thp}|$ must be satisfied.\n\n---\n\n### 3. Small-Signal Analysis\nUsing the small-signal model for the PMOS transistor (where $g_m$ is the transconductance), we can derive the following parameters:\n\n#### **Voltage Gain ($A_v$)**\nThe voltage gain is given by the formula:\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{-g_m R_D}{1 + g_m R_S}$$\n*   **Inverting:** The negative sign indicates that the output is $180^\\circ$ out of phase with the input. If $V_{in}$ increases, $V_{SG}$ decreases, causing $I_D$ to decrease, which in turn causes $V_{out}$ ($I_D R_D$) to decrease.\n*   **Approximation:** If $g_m R_S \\gg 1$, the gain simplifies to $A_v \\approx -\\frac{R_D}{R_S}$. This makes the gain highly stable and dependent on resistor ratios rather than transistor parameters.\n\n#### **Input Impedance ($R_{in}$)**\nSince the input is at the gate of a MOSFET:\n$$R_{in} \\approx \\infty$$\n(At low frequencies, the gate draws virtually no current).\n\n#### **Output Impedance ($R_{out}$)**\nLooking into the drain terminal:\n$$R_{out} \\approx R_D$$\n(Assuming the transistor's internal output resistance $r_o$ is much larger than $R_D$).\n\n---\n\n### 4. Role of Source Degeneration ($R_S$)\nThe inclusion of $R_S$ provides several benefits at the cost of reduced gain:\n1.  **Linearity:** It linearizes the transconductance, reducing distortion for large input signals.\n2.  **Stability:** It makes the gain less sensitive to variations in temperature and manufacturing processes (which affect $g_m$).\n3.  **Bandwidth:** By reducing the gain, it typically increases the frequency range (bandwidth) over which the amplifier can operate.\n4.  **Output Impedance:** It increases the effective output resistance of the transistor itself (looking into the drain).",
        "format": "markdown",
        "sha256": "3d0a7cd6da965363f93ee4ccd6a1738801d2ba020dcd1b99170fc87152e3a43f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS), satisfying the full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 4408,
        "total_tokens": 5523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3531,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 4408,
        "total_tokens": 5523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3531,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\n*   **Transistor Type:** The transistor $M_1$ is a **PMOS** transistor, indicated by the arrow on the source terminal pointing into the channel.\n*   **Configuration:** This is a **Common-Source (CS) amplifier with source degeneration**. \n    *   The input signal $V_{in}$ is applied to the **gate**.\n    *   The output signal $V_{out}$ is taken from the **drain**.\n    *   The **source** is connected to the supply voltage $V_{DD}$ through a resistor $R_S$. This resistor provides \"degeneration,\" which is a form of local negative feedback.\n\n### 2. DC Analysis (Biasing)\nFor the circuit to operate as an amplifier, the PMOS transistor must be biased in the **saturation region**. The conditions for saturation in a PMOS are:\n1.  $V_{SG} > |V_{thp}|$ (The transistor is ON)\n2.  $V_{SD} > V_{SG} - |V_{thp}|$ (To stay in saturation)\n\nThe drain current $I_D$ can be expressed as:\n$$I_D \\approx \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_{SG} - |V_{thp}|)^2$$\nwhere $V_{SG} = V_{DD} - I_D R_S - V_{in}$.\n\n### 3. Small-Signal Analysis\nUsing the small-signal model for the PMOS (assuming channel length modulation $\\lambda = 0$ and ignoring body effect for simplicity), we can determine the key performance parameters:\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain is given by the ratio of the output voltage to the input voltage:\n    $$A_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_m R_D}{1 + g_m R_S}$$\n    *   The negative sign indicates that the amplifier is **inverting** (180° phase shift).\n    *   The term $(1 + g_m R_S)$ in the denominator shows that the gain is reduced compared to a standard CS amplifier (where $A_v = -g_m R_D$). This is the effect of **source degeneration**.\n\n*   **Input Impedance ($R_{in}$):**\n    Looking into the gate of a MOSFET at low frequencies, the impedance is ideally infinite:\n    $$R_{in} \\approx \\infty$$\n\n*   **Output Impedance ($R_{out}$):**\n    Looking back into the output terminal (drain), the impedance is the parallel combination of $R_D$ and the resistance looking into the drain of $M_1$:\n    $$R_{out} \\approx R_D$$\n    (If we consider the transistor's output resistance $r_o$, the exact formula is $R_{out} = R_D \\parallel [r_o + (1 + g_m r_o)R_S]$, which is typically dominated by $R_D$).\n\n### 4. Summary of Characteristics\n*   **Linearity:** The source resistor $R_S$ improves the linearity of the amplifier by making the gain less dependent on the transistor's transconductance ($g_m$), which varies with the signal.\n*   **Stability:** The gain is more stable against process and temperature variations.\n*   **Bandwidth:** Source degeneration typically increases the bandwidth of the amplifier at the cost of reduced gain.\n*   **Applications:** This circuit is commonly used in analog signal processing where a stable, predictable gain and high input impedance are required.",
        "format": "markdown",
        "sha256": "4913985c8ddea07ec187ed26f4a0d54e3518a4f08fc5868c6eec18cb2c42e45f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS), with appropriate assumptions.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 2539,
        "total_tokens": 3654,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1718,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 2539,
        "total_tokens": 3654,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1718,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\n*   **Transistor ($M_1$):** This is a **PMOS** (P-channel Metal-Oxide-Semiconductor) transistor. You can identify it by the arrow on the source terminal pointing into the channel.\n*   **Configuration:** This is a **Common-Source (CS) amplifier with source degeneration**. \n    *   The input signal ($V_{in}$) is applied to the **gate**.\n    *   The output signal ($V_{out}$) is taken from the **drain**.\n    *   The **source** is common to both input and output through the resistor $R_S$.\n\n### 2. DC Analysis (Biasing)\nFor the circuit to operate as an amplifier, the transistor $M_1$ must be biased in the **saturation region**.\n*   **Source Voltage ($V_S$):** $V_S = V_{DD} - I_D R_S$, where $I_D$ is the quiescent drain current.\n*   **Gate Voltage ($V_G$):** $V_G = V_{in}$ (DC component).\n*   **Drain Voltage ($V_D$):** $V_D = V_{out} = I_D R_D$.\n*   **Saturation Condition:** For a PMOS, the transistor is in saturation if $V_{SD} > V_{SG} - |V_{thp}|$, where $V_{thp}$ is the threshold voltage.\n\n### 3. Small-Signal Analysis\nIn the small-signal regime, we analyze how the circuit responds to small variations in $V_{in}$.\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain for a common-source amplifier with source degeneration is given by:\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx \\frac{-g_m R_D}{1 + g_m R_S}$$\n    Where $g_m$ is the transconductance of the transistor. \n    *   If $g_m R_S \\gg 1$, the gain simplifies to: **$A_v \\approx -\\frac{R_D}{R_S}$**.\n    *   The negative sign indicates that the amplifier is **inverting** (a 180-degree phase shift between input and output).\n\n*   **Input Impedance ($R_{in}$):**\n    Looking into the gate of a MOSFET at low frequencies, the impedance is ideally infinite: **$R_{in} \\rightarrow \\infty$**.\n\n*   **Output Impedance ($R_{out}$):**\n    The output impedance looking into the drain terminal is increased by the source degeneration resistor $R_S$. It is approximately:\n    $$R_{out} \\approx R_D \\parallel [r_o(1 + g_m R_S)]$$\n    where $r_o$ is the internal output resistance of the transistor. In many practical cases, this is dominated by the load resistor $R_D$.\n\n### 4. Role of Source Degeneration ($R_S$)\nThe resistor $R_S$ provides **negative feedback**, which has several important effects:\n1.  **Gain Stabilization:** The gain becomes less dependent on the transistor's parameters (like $g_m$, which varies with temperature and process) and more dependent on the ratio of stable resistors ($R_D/R_S$).\n2.  **Linearity:** It increases the linear input voltage range, reducing distortion for larger signals.\n3.  **Bandwidth:** It typically increases the bandwidth of the amplifier at the cost of reduced gain.\n4.  **Output Impedance:** It increases the output impedance of the transistor stage itself.\n\n### Summary\nThis circuit is a standard **PMOS Common-Source amplifier with source degeneration**. It is used to provide stable voltage gain with high input impedance. While $R_S$ reduces the overall gain, it significantly improves the amplifier's linearity and stability.",
        "format": "markdown",
        "sha256": "92ba47b79f6cc45bf830762b022b920a85908d8c8079363631d8bad5d11e1a35"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gm RD/(1 + gm RS), satisfying the full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 2267,
        "total_tokens": 3382,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1385,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 2267,
        "total_tokens": 3382,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1385,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Drain (CD) amplifier**, more commonly known as a **Source Follower**. It uses an n-channel MOSFET ($M_1$) where the input signal is applied to the gate, the output is taken from the source, and the drain is connected to a constant supply voltage ($V_{DD}$), which acts as an AC ground.\n\n### 2. Key Characteristics\nThe Source Follower is widely used in analog electronics due to its unique properties:\n\n*   **Voltage Gain ($A_v$):** The voltage gain is positive (non-inverting) and slightly less than unity (1). This means the output voltage \"follows\" the input voltage, hence the name.\n    *   Formula: $A_v = \\frac{v_{out}}{v_{in}} \\approx \\frac{g_m R_S}{1 + g_m R_S}$\n    *   (where $g_m$ is the transconductance of the MOSFET).\n*   **Input Impedance ($R_{in}$):** It has a very high input impedance because the gate of a MOSFET is insulated. This prevents the circuit from loading down the previous stage.\n*   **Output Impedance ($R_{out}$):** It has a low output impedance, typically around $1/g_m$. This allows it to drive low-resistance loads effectively without a significant drop in voltage.\n    *   Formula: $R_{out} \\approx \\frac{1}{g_m} \\parallel R_S$\n\n### 3. Small-Signal Analysis\nWhen analyzing the circuit for small signals (AC):\n*   The MOSFET acts as a voltage-controlled current source.\n*   As $V_{in}$ increases, the gate-to-source voltage ($V_{GS}$) increases, causing more current to flow through the transistor and the resistor $R_S$.\n*   This increased current through $R_S$ causes $V_{out}$ to rise, maintaining a nearly constant $V_{GS}$.\n\n### 4. Applications\nBecause of its high input impedance and low output impedance, the Source Follower is primarily used as a **Buffer Stage** or an **Impedance Transformer**. It is often placed between a high-impedance source and a low-impedance load to ensure maximum voltage transfer and prevent signal distortion.\n\n### 5. Practical Considerations (Body Effect)\nIn many integrated circuit designs, the \"body\" (substrate) of the NMOS is connected to the lowest potential (ground). Since the source is at a higher potential than ground ($V_{out} > 0$), a \"body effect\" occurs. This slightly reduces the voltage gain and increases the output impedance compared to the ideal formulas.",
        "format": "markdown",
        "sha256": "9db8ef59131d1cef789bf386e215300d54aae5016fd3745eebbcd79befb2f711"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain formula. The output-resistance and body-effect comments are also consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2170,
        "total_tokens": 3280,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1567,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2170,
        "total_tokens": 3280,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1567,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Common-Drain (CD) amplifier**, also widely known as a **Source Follower**.\n\nIn this configuration, the input signal ($V_{in}$) is applied to the gate of the NMOS transistor ($M_1$), and the output signal ($V_{out}$) is taken from the source. The drain is connected to a constant supply voltage ($V_{DD}$), which acts as an AC ground.\n\n### 1. Circuit Characteristics\n*   **Voltage Gain ($A_v$):** The voltage gain is positive and slightly less than unity (1). This means the output voltage \"follows\" the input voltage, hence the name \"source follower.\"\n*   **Input Impedance ($R_{in}$):** Very high. Since the input is at the gate of a MOSFET, it draws virtually no current at low frequencies.\n*   **Output Impedance ($R_{out}$):** Low. This makes it excellent for driving low-impedance loads without significant signal loss.\n*   **Phase:** The output is in phase with the input.\n\n### 2. Small-Signal Analysis\nUsing the small-signal model for the MOSFET (assuming saturation and neglecting the body effect for simplicity), we can derive the following key parameters:\n\n*   **Voltage Gain ($A_v$):**\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_S}{1 + g_m R_S}$$\n    where $g_m$ is the transconductance of the transistor. If $g_m R_S \\gg 1$, then $A_v \\approx 1$.\n    *If the body effect is considered, the gain is further reduced to $A_v \\approx \\frac{g_m}{g_m + g_{mb}}$, where $g_{mb}$ is the body-effect transconductance.*\n\n*   **Input Resistance ($R_{in}$):**\n    $$R_{in} \\rightarrow \\infty$$ (ideally)\n\n*   **Output Resistance ($R_{out}$):**\n    Looking back into the source terminal:\n    $$R_{out} \\approx \\frac{1}{g_m} \\parallel R_S$$\n    Since $1/g_m$ is typically much smaller than $R_S$, the output resistance is approximately $1/g_m$, which is quite low.\n\n### 3. Applications\nThe Source Follower is primarily used for:\n*   **Impedance Matching:** It acts as a bridge between a high-impedance source and a low-impedance load.\n*   **Buffering:** It prevents a load from \"loading down\" a previous stage in a multi-stage amplifier, ensuring that the voltage signal is preserved.\n*   **Level Shifting:** It can be used to shift the DC level of a signal by $V_{GS}$.",
        "format": "markdown",
        "sha256": "0a4bd927c0367f23d3a62f2459b5a378cb57633626cb8a9297fd9f473f2a85d4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, with appropriate output-resistance analysis.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2057,
        "total_tokens": 3167,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2057,
        "total_tokens": 3167,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Drain (CD) amplifier**, more commonly known as a **Source Follower**. It uses an n-channel MOSFET ($M_1$) in a configuration where the input signal is applied to the gate and the output signal is taken from the source.\n\n### 2. Component Roles\n*   **$M_1$ (NMOS Transistor):** The active device that provides current gain.\n*   **$V_{DD}$:** The positive DC power supply connected to the drain. In small-signal analysis, this is considered an AC ground.\n*   **$V_{in}$:** The input signal voltage applied to the gate.\n*   **$R_S$:** The source resistor, which helps bias the transistor and serves as the load for the source terminal.\n*   **$V_{out}$:** The output signal voltage taken from the source terminal.\n\n### 3. Key Characteristics\nThe Source Follower is characterized by the following parameters:\n\n*   **Voltage Gain ($A_v$):** The gain is positive (non-inverting) and slightly less than unity (1).\n    *   Formula: $A_v = \\frac{g_m R_S}{1 + g_m R_S}$ (assuming $r_o$ is very large).\n    *   Because the output \"follows\" the input voltage (minus the gate-to-source voltage $V_{GS}$), it is called a source follower.\n*   **Input Impedance ($Z_{in}$):** Very high. Since the input is at the gate of a MOSFET, almost no current flows into the device at low frequencies.\n*   **Output Impedance ($Z_{out}$):** Low. Looking back into the source, the impedance is approximately $1/g_m$ in parallel with $R_S$. This makes it excellent for driving low-impedance loads.\n*   **Phase:** The output signal is in phase with the input signal.\n\n### 4. Summary Table\n| Parameter | Characteristic |\n| :--- | :--- |\n| **Configuration** | Common-Drain (Source Follower) |\n| **Voltage Gain** | $\\approx 1$ (slightly less) |\n| **Current Gain** | High |\n| **Input Impedance** | Very High |\n| **Output Impedance** | Low |\n| **Phase Shift** | $0^\\circ$ (In-phase) |\n\n### 5. Applications\nDue to its high input impedance and low output impedance, this circuit is primarily used as a **Buffer Amplifier**. It allows a signal source with high internal resistance to drive a load with low resistance without significant signal attenuation or loading effects.",
        "format": "markdown",
        "sha256": "f4c21cc1081406af8821dcacddce5e111e08d996a21a2fd954b6d77bea712e6d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as gmRS/(1 + gmRS).",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 1456,
        "total_tokens": 2566,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 855,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 1456,
        "total_tokens": 2566,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 855,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Gate (CG) Amplifier** using an NMOS transistor ($M_1$).\n*   **Input ($V_{in}$):** Applied to the **source** terminal.\n*   **Output ($V_{out}$):** Taken from the **drain** terminal.\n*   **Gate:** Connected to a constant DC voltage, $V_{DD}$. In small-signal analysis, the gate is considered to be at AC ground.\n\n### 2. DC Analysis (Biasing)\n*   The gate voltage is fixed at $V_G = V_{DD}$.\n*   For the transistor to be in the \"ON\" state (saturation or triode), the gate-to-source voltage ($V_{GS}$) must be greater than the threshold voltage ($V_{th}$).\n    *   $V_{GS} = V_G - V_S = V_{DD} - V_{in}$\n    *   Condition for ON: $V_{DD} - V_{in} > V_{th} \\Rightarrow V_{in} < V_{DD} - V_{th}$.\n*   The drain current $I_D$ flows through the resistor $R_D$, setting the output voltage: $V_{out} = V_{DD} - I_D R_D$.\n\n### 3. Small-Signal Analysis\nIn the small-signal regime, we look at how small changes in $V_{in}$ affect $V_{out}$.\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain for a common-gate amplifier is **positive** (non-inverting).\n    Ignoring channel length modulation ($r_o \\rightarrow \\infty$) and the body effect, the gain is approximately:\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx g_m R_D$$\n    Where $g_m$ is the transconductance of the transistor. If we include the output resistance $r_o$, the more precise formula is:\n    $$A_v = \\frac{(g_m + g_{mb})r_o + 1}{r_o + R_D} R_D \\approx (g_m + g_{mb}) (R_D \\parallel r_o)$$\n\n*   **Input Impedance ($R_{in}$):**\n    The input is at the source, which typically has a very **low impedance**:\n    $$R_{in} \\approx \\frac{1}{g_m + g_{mb}}$$\n    This low input impedance makes the CG stage useful as a current buffer.\n\n*   **Output Impedance ($R_{out}$):**\n    Looking into the drain, the output impedance is relatively **high**:\n    $$R_{out} \\approx R_D \\parallel r_o \\approx R_D$$\n\n### 4. Key Characteristics and Applications\n*   **Non-Inverting:** Unlike the common-source amplifier, the output is in phase with the input.\n*   **High-Frequency Performance:** The CG amplifier does not suffer from the **Miller Effect** because the gate-drain capacitance ($C_{gd}$) is not between the input and output. This makes it excellent for wideband and high-frequency applications.\n*   **Current Buffer:** Because of its low input impedance and high output impedance, it is often used to \"buffer\" a current signal, passing it from a low-impedance source to a high-impedance load.\n*   **Cascode Stage:** It is frequently used as the second stage in a \"cascode\" amplifier to increase output impedance and gain while improving frequency response.",
        "format": "markdown",
        "sha256": "d76265f64d82bdce7f7f83065c0c62f4e15ab3b0832786aceacd1a18526f7247"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and AC-grounded gate, and gives the positive gain and low source input resistance. The added body-effect and finite-ro expressions are consistent with the circuit; extra application comments do not detract.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2486,
        "total_tokens": 3567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2486,
        "total_tokens": 3567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Gate (CG) Amplifier** using an NMOS transistor ($M_1$).\n*   **Input ($V_{in}$):** Applied to the **source** terminal.\n*   **Output ($V_{out}$):** Taken from the **drain** terminal.\n*   **Gate:** Connected to a constant DC voltage, $V_{DD}$. In small-signal analysis, the gate is considered to be at AC ground.\n\n### 2. DC Analysis (Biasing)\n*   The gate voltage is fixed at $V_G = V_{DD}$.\n*   For the transistor to be in the \"ON\" state (saturation or triode), the gate-to-source voltage ($V_{GS}$) must be greater than the threshold voltage ($V_{th}$).\n    *   $V_{GS} = V_G - V_S = V_{DD} - V_{in}$\n    *   Condition for ON: $V_{DD} - V_{in} > V_{th} \\Rightarrow V_{in} < V_{DD} - V_{th}$.\n*   The drain current $I_D$ flows through the resistor $R_D$, setting the output voltage: $V_{out} = V_{DD} - I_D R_D$.\n\n### 3. Small-Signal Analysis\nIn the small-signal regime, we look at how small changes in $V_{in}$ affect $V_{out}$.\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain for a common-gate amplifier is **positive** (non-inverting).\n    Ignoring channel length modulation ($r_o \\rightarrow \\infty$) and the body effect, the gain is approximately:\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx g_m R_D$$\n    Where $g_m$ is the transconductance of the transistor. If we include the output resistance $r_o$, the more precise formula is:\n    $$A_v = \\frac{(g_m + g_{mb})r_o + 1}{r_o + R_D} R_D \\approx (g_m + g_{mb}) (R_D \\parallel r_o)$$\n\n*   **Input Impedance ($R_{in}$):**\n    The input is at the source, which typically has a very **low impedance**:\n    $$R_{in} \\approx \\frac{1}{g_m + g_{mb}}$$\n    This low input impedance makes the CG stage useful as a current buffer.\n\n*   **Output Impedance ($R_{out}$):**\n    Looking into the drain, the output impedance is relatively **high**:\n    $$R_{out} \\approx R_D \\parallel r_o \\approx R_D$$\n\n### 4. Key Characteristics and Applications\n*   **Non-Inverting:** Unlike the common-source amplifier, the output is in phase with the input.\n*   **High-Frequency Performance:** The CG amplifier does not suffer from the **Miller Effect** because the gate-drain capacitance ($C_{gd}$) is not between the input and output. This makes it excellent for wideband and high-frequency applications.\n*   **Current Buffer:** Because of its low input impedance and high output impedance, it is often used to \"buffer\" a current signal, passing it from a low-impedance source to a high-impedance load.\n*   **Cascode Stage:** It is frequently used as the second stage in a \"cascode\" amplifier to increase output impedance and gain while improving frequency response.",
        "format": "markdown",
        "sha256": "d76265f64d82bdce7f7f83065c0c62f4e15ab3b0832786aceacd1a18526f7247"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and AC-grounded gate, and gives the positive gain and low source input resistance. The added body-effect and finite-ro expressions are consistent with the circuit; extra application comments do not detract.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2486,
        "total_tokens": 3567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2486,
        "total_tokens": 3567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Gate (CG) amplifier** using an NMOS transistor ($M_1$).\n*   **Input ($V_{in}$):** Applied to the **source** terminal.\n*   **Output ($V_{out}$):** Taken from the **drain** terminal.\n*   **Gate:** Connected to a constant DC voltage, $V_{DD}$. In small-signal analysis, the gate is considered AC grounded.\n\n### 2. DC Analysis (Biasing)\n*   **Gate Voltage ($V_G$):** $V_G = V_{DD}$.\n*   **Source Voltage ($V_S$):** $V_S = V_{in}$ (assuming $V_{in}$ includes a DC bias component).\n*   **Gate-Source Voltage ($V_{GS}$):** $V_{GS} = V_G - V_S = V_{DD} - V_{in}$.\n*   For the transistor to be \"ON\" and in the saturation region (for amplification), $V_{GS}$ must be greater than the threshold voltage ($V_{th}$), and $V_{DS} \\ge V_{GS} - V_{th}$.\n*   **Drain Current ($I_D$):** In saturation, $I_D \\approx \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{DD} - V_{in} - V_{th})^2$.\n*   **Output Voltage ($V_{out}$):** $V_{out} = V_{DD} - I_D R_D$.\n\n### 3. Small-Signal Analysis\nTo find the gain and impedances, we look at the small-signal behavior:\n*   **Voltage Gain ($A_v$):**\n    The small-signal gate-source voltage is $v_{gs} = v_g - v_s = 0 - v_{in} = -v_{in}$.\n    The small-signal drain current is $i_d = g_m v_{gs} = -g_m v_{in}$.\n    The output voltage is $v_{out} = -i_d R_D = -(-g_m v_{in}) R_D = g_m R_D v_{in}$.\n    Therefore, the voltage gain is:\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx g_m R_D$$\n    *(If body effect is considered, the gain becomes $(g_m + g_{mb})R_D$)*.\n    Note that the gain is **positive**, meaning the output is **in phase** with the input (non-inverting).\n\n*   **Input Impedance ($R_{in}$):**\n    Looking into the source, the input impedance is low:\n    $$R_{in} \\approx \\frac{1}{g_m + g_{mb}}$$\n\n*   **Output Impedance ($R_{out}$):**\n    Looking into the drain, the output impedance is high:\n    $$R_{out} \\approx R_D$$\n\n### 4. Key Characteristics and Applications\n*   **Non-inverting Gain:** Unlike the common-source amplifier, the CG amplifier does not invert the signal.\n*   **Low Input Impedance:** This makes it useful as a current buffer or for matching with low-impedance sources (like a $50\\Omega$ transmission line).\n*   **High-Frequency Performance:** The CG stage does not suffer from the **Miller Effect** on the input capacitance because the gate is grounded. This makes it very effective for wideband and high-frequency applications.\n*   **Common Use:** It is often used as the second stage in a **cascode amplifier** to provide high output impedance and improved frequency response.",
        "format": "markdown",
        "sha256": "9f0c8717748dcf46db56a3b1aee4aab623ee3b929af10654c74e1ab48ce00687"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and derives its non-inverting gain and low input resistance. The added body-effect and output-resistance approximations do not alter the essential analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 3218,
        "total_tokens": 4299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 3218,
        "total_tokens": 4299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Gate (CG) Amplifier** using an NMOS transistor ($M_1$).\n*   **Input ($V_{in}$):** Applied to the **source** of the transistor through a coupling capacitor ($C_1$).\n*   **Output ($V_{out}$):** Taken from the **drain** of the transistor.\n*   **Gate:** Connected to a constant DC bias voltage ($V_b$), which acts as an **AC ground**.\n*   **Load:** A drain resistor ($R_D$) connected to the supply voltage ($V_{DD}$).\n\n### 2. Operating Principle\nIn a common-gate configuration, the gate is held at a constant potential. When the input signal $V_{in}$ increases, the source voltage $V_S$ increases. Since the gate voltage $V_G$ is fixed, the gate-to-source voltage ($V_{GS} = V_G - V_S$) decreases. This reduction in $V_{GS}$ decreases the drain current ($I_D$), which in turn causes the voltage drop across $R_D$ to decrease, leading to an increase in the output voltage $V_{out}$. \n\nBecause an increase in $V_{in}$ results in an increase in $V_{out}$, the amplifier is **non-inverting**.\n\n### 3. Small-Signal Analysis\nAssuming the transistor is biased in the saturation region, the key parameters are:\n\n*   **Voltage Gain ($A_v$):**\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx g_m R_D$$\n    *(Where $g_m$ is the transconductance of the transistor. If body effect is considered, the gain increases to $(g_m + g_{mb})R_D$.)*\n*   **Input Impedance ($R_{in}$):**\n    $$R_{in} \\approx \\frac{1}{g_m}$$\n    The common-gate amplifier is characterized by a **very low input impedance**, which makes it suitable for matching with low-impedance sources.\n*   **Output Impedance ($R_{out}$):**\n    $$R_{out} \\approx R_D$$\n    It has a **high output impedance**, similar to a common-source amplifier.\n\n### 4. Key Characteristics and Applications\n*   **Non-inverting Gain:** The output signal is in phase with the input signal.\n*   **High-Frequency Performance:** Unlike the common-source amplifier, the common-gate stage does not suffer from the **Miller Effect** on its input capacitance. This makes it excellent for wideband and high-frequency (RF) applications.\n*   **Current Buffer:** Due to its low input impedance and high output impedance, it is often used as a current buffer or as the second stage in a **cascode amplifier** to increase output impedance and bandwidth.\n\n### 5. Note on the Schematic\nThere is a ground symbol connected directly to the source node of $M_1$. In a practical amplifier circuit, a direct hard ground at this node would short-circuit the AC input signal $V_{in}$ to ground, resulting in zero gain. \n\nIn a functional design, this ground would typically be replaced by a **constant current source** or a **large resistor**. This provides the necessary DC bias current for the transistor while maintaining a high AC impedance so that the input signal can effectively drive the source.",
        "format": "markdown",
        "sha256": "a263840451dc768a41bea4298fafc47bbf4cf3b7fc4f8d6454728f4f52086cfe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It notices that the source is hard-grounded and correctly says the input is shorted, giving ideally zero gain. However, it also assigns the circuit the usual common-gate gain and input impedance as if that short were absent, contradicting the key analysis.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 7234,
        "total_tokens": 8322,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 7234,
        "total_tokens": 8322,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Gate (CG) Amplifier** using an NMOS transistor ($M_1$).\n*   **Input ($V_{in}$):** Applied to the **source** of the transistor through a coupling capacitor ($C_1$).\n*   **Output ($V_{out}$):** Taken from the **drain** of the transistor.\n*   **Gate:** Connected to a constant DC bias voltage ($V_b$), which acts as an **AC ground**.\n*   **Load:** A drain resistor ($R_D$) connected to the supply voltage ($V_{DD}$).\n\n### 2. Operating Principle\nIn a common-gate configuration, the gate is held at a constant potential. When the input signal $V_{in}$ increases, the source voltage $V_S$ increases. Since the gate voltage $V_G$ is fixed, the gate-to-source voltage ($V_{GS} = V_G - V_S$) decreases. This reduction in $V_{GS}$ decreases the drain current ($I_D$), which in turn causes the voltage drop across $R_D$ to decrease, leading to an increase in the output voltage $V_{out}$. \n\nBecause an increase in $V_{in}$ results in an increase in $V_{out}$, the amplifier is **non-inverting**.\n\n### 3. Small-Signal Analysis\nAssuming the transistor is biased in the saturation region, the key parameters are:\n\n*   **Voltage Gain ($A_v$):**\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx g_m R_D$$\n    *(Where $g_m$ is the transconductance of the transistor. If body effect is considered, the gain increases to $(g_m + g_{mb})R_D$.)*\n*   **Input Impedance ($R_{in}$):**\n    $$R_{in} \\approx \\frac{1}{g_m}$$\n    The common-gate amplifier is characterized by a **very low input impedance**, which makes it suitable for matching with low-impedance sources.\n*   **Output Impedance ($R_{out}$):**\n    $$R_{out} \\approx R_D$$\n    It has a **high output impedance**, similar to a common-source amplifier.\n\n### 4. Key Characteristics and Applications\n*   **Non-inverting Gain:** The output signal is in phase with the input signal.\n*   **High-Frequency Performance:** Unlike the common-source amplifier, the common-gate stage does not suffer from the **Miller Effect** on its input capacitance. This makes it excellent for wideband and high-frequency (RF) applications.\n*   **Current Buffer:** Due to its low input impedance and high output impedance, it is often used as a current buffer or as the second stage in a **cascode amplifier** to increase output impedance and bandwidth.\n\n### 5. Note on the Schematic\nThere is a ground symbol connected directly to the source node of $M_1$. In a practical amplifier circuit, a direct hard ground at this node would short-circuit the AC input signal $V_{in}$ to ground, resulting in zero gain. \n\nIn a functional design, this ground would typically be replaced by a **constant current source** or a **large resistor**. This provides the necessary DC bias current for the transistor while maintaining a high AC impedance so that the input signal can effectively drive the source.",
        "format": "markdown",
        "sha256": "a263840451dc768a41bea4298fafc47bbf4cf3b7fc4f8d6454728f4f52086cfe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It notices that the source is hard-grounded and correctly says the input is shorted, giving ideally zero gain. However, it also assigns the circuit the usual common-gate gain and input impedance as if that short were absent, contradicting the key analysis.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 7234,
        "total_tokens": 8322,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 7234,
        "total_tokens": 8322,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided schematic, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Gate (CG) Amplifier** using an NMOS transistor ($M_1$).\n*   **Input ($V_{in}$):** Applied to the **source** of the transistor through a coupling capacitor ($C_1$).\n*   **Output ($V_{out}$):** Taken from the **drain** of the transistor.\n*   **Gate:** Connected to a constant DC bias voltage ($V_b$), which acts as an **AC ground**.\n*   **Load:** A drain resistor ($R_D$) connected to the supply voltage ($V_{DD}$).\n\n### 2. Operating Principle\nIn a common-gate configuration, the gate is held at a constant potential. When the input signal $V_{in}$ increases, the source voltage $V_S$ increases. Since the gate voltage $V_G$ is fixed, the gate-to-source voltage ($V_{GS} = V_G - V_S$) decreases. This reduction in $V_{GS}$ decreases the drain current ($I_D$), which in turn causes the voltage drop across $R_D$ to decrease, leading to an increase in the output voltage $V_{out}$. \n\nBecause an increase in $V_{in}$ results in an increase in $V_{out}$, the amplifier is **non-inverting**.\n\n### 3. Small-Signal Analysis\nAssuming the transistor is biased in the saturation region, the key parameters are:\n\n*   **Voltage Gain ($A_v$):**\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx g_m R_D$$\n    *(Where $g_m$ is the transconductance of the transistor. If body effect is considered, the gain increases to $(g_m + g_{mb})R_D$.)*\n*   **Input Impedance ($R_{in}$):**\n    $$R_{in} \\approx \\frac{1}{g_m}$$\n    The common-gate amplifier is characterized by a **very low input impedance**, which makes it suitable for matching with low-impedance sources.\n*   **Output Impedance ($R_{out}$):**\n    $$R_{out} \\approx R_D$$\n    It has a **high output impedance**, similar to a common-source amplifier.\n\n### 4. Key Characteristics and Applications\n*   **Non-inverting Gain:** The output signal is in phase with the input signal.\n*   **High-Frequency Performance:** Unlike the common-source amplifier, the common-gate stage does not suffer from the **Miller Effect** on its input capacitance. This makes it excellent for wideband and high-frequency (RF) applications.\n*   **Current Buffer:** Due to its low input impedance and high output impedance, it is often used as a current buffer or as the second stage in a **cascode amplifier** to increase output impedance and bandwidth.\n\n### 5. Note on the Schematic\nThere is a ground symbol connected directly to the source node of $M_1$. In a practical amplifier circuit, a direct hard ground at this node would short-circuit the AC input signal $V_{in}$ to ground, resulting in zero gain. \n\nIn a functional design, this ground would typically be replaced by a **constant current source** or a **large resistor**. This provides the necessary DC bias current for the transistor while maintaining a high AC impedance so that the input signal can effectively drive the source.",
        "format": "markdown",
        "sha256": "a263840451dc768a41bea4298fafc47bbf4cf3b7fc4f8d6454728f4f52086cfe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It notices that the source is hard-grounded and correctly says the input is shorted, giving ideally zero gain. However, it also assigns the circuit the usual common-gate gain and input impedance as if that short were absent, contradicting the key analysis.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 7234,
        "total_tokens": 8322,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 7234,
        "total_tokens": 8322,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to identify the number of independent energy storage elements (capacitors) that contribute to the circuit's frequency response.\n\n1.  **Identify the Nodes:**\n    *   **Input Node ($V_{in}$):** This is an ideal voltage source, so it does not contribute a pole directly.\n    *   **Gate Node:** This is an independent node connected to $V_{in}$ through $R_S$. It has capacitors $C_{GS}$ (to ground) and $C_{GD}$ (to the drain) connected to it.\n    *   **Drain Node ($V_{out}$):** This is another independent node connected to $V_{DD}$ (AC ground) through $R_D$. It has capacitors $C_{DB}$ (to ground) and $C_{GD}$ (to the gate) connected to it.\n    *   **Source Node:** The source of the MOSFET $M_1$ is directly connected to ground.\n    *   **Bulk Node:** The bulk is also connected to ground (as indicated by the ground symbols for $C_{DB}$ and $C_{SB}$).\n\n2.  **Analyze the Capacitors:**\n    *   **$C_{GS}$:** Connected between the gate and the source (ground). It is an active energy storage element.\n    *   **$C_{GD}$:** Connected between the gate and the drain. It is an active energy storage element that couples the two nodes.\n    *   **$C_{DB}$:** Connected between the drain and the bulk (ground). It is an active energy storage element.\n    *   **$C_{SB}$:** Connected between the source and the bulk. Since both the source and the bulk are grounded, this capacitor is shorted out and does not affect the circuit's dynamics or contribute to any poles.\n\n3.  **Count the Poles:**\n    *   The number of poles in a circuit is generally equal to the number of independent nodes that have a capacitance to ground or to other nodes.\n    *   In this circuit, there are **two** such independent nodes: the **Gate** and the **Drain**.\n    *   Mathematically, the small-signal transfer function $V_{out}(s)/V_{in}(s)$ will have a denominator of the second degree in $s$ because there are two independent state variables (the voltages at the gate and drain nodes).\n    *   While there are three \"active\" capacitors ($C_{GS}$, $C_{GD}$, and $C_{DB}$), they form a loop ($Gate \\to C_{GS} \\to Ground \\to C_{DB} \\to Drain \\to C_{GD} \\to Gate$). In any loop consisting only of capacitors, one capacitor's voltage is dependent on the others, reducing the total number of independent states (poles) by one. Thus, $3 \\text{ capacitors} - 1 \\text{ loop} = 2 \\text{ poles}$.\n\nTherefore, the circuit has **2** poles.",
        "format": "markdown",
        "sha256": "3b63c50626ba034012de716b8bcca859fbafae5a2cd05e143e1cd481ecffadd6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes there are two poles and accounts for the capacitors: C_SB is shorted because both terminals are grounded, while C_GS, C_GD, and C_DB form a loop with only two independent capacitor voltages.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 7720,
        "total_tokens": 8812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7069,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 7720,
        "total_tokens": 8812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7069,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to identify the number of independent energy storage elements (capacitors in this case) that contribute to the circuit's dynamics.\n\n1.  **Identify the nodes with non-fixed voltages:**\n    *   **Gate Node:** The voltage at the gate can vary. It is connected to ground through $C_{GS}$ and to the drain through $C_{GD}$.\n    *   **Drain Node ($V_{out}$):** The voltage at the drain can vary. It is connected to ground through $C_{DB}$ and to the gate through $C_{GD}$.\n    *   **Source Node:** The source is directly connected to ground. Therefore, the capacitor $C_{SB}$ is connected between ground and ground, meaning it is shorted out and does not affect the circuit's frequency response.\n\n2.  **Count the independent capacitors:**\n    *   We have three active capacitors: $C_{GS}$, $C_{GD}$, and $C_{DB}$.\n    *   These three capacitors form a loop (Gate $\\rightarrow$ $C_{GD}$ $\\rightarrow$ Drain $\\rightarrow$ $C_{DB}$ $\\rightarrow$ Ground $\\rightarrow$ $C_{GS}$ $\\rightarrow$ Gate). In any loop consisting only of capacitors, the voltage across one capacitor is determined by the voltages across the others.\n    *   Mathematically, the number of poles is equal to the number of independent state variables (capacitor voltages). Since there are 2 independent nodes with capacitance to ground (Gate and Drain), there are **2 independent state variables**.\n\n3.  **Conclusion:**\n    The circuit is a second-order system because it has two independent nodes where charge can be stored. Therefore, it has **2 poles**. (Note: It also has 1 zero due to the feed-forward path through $C_{GD}$).\n\n**Final Answer:**\nThe circuit has **2** poles.",
        "format": "markdown",
        "sha256": "5e6611976dad5ec1ddce71ccca4a930292d3007e3f40ad00fb88d019f6df09c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that CSB is shorted because the source is grounded, and that CGS, CGD, and CDB yield only two independent capacitor voltages. The conclusion of two poles is correct.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1951,
        "total_tokens": 3043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1951,
        "total_tokens": 3043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to identify the number of independent energy storage elements (capacitors) that contribute to the circuit's frequency response.\n\n1.  **Identify the nodes and capacitors:**\n    *   **Gate Node:** There are two capacitors connected to this node: $C_{GS}$ (Gate-to-Source) and $C_{GD}$ (Gate-to-Drain).\n    *   **Drain Node:** There are two capacitors connected to this node: $C_{DB}$ (Drain-to-Bulk/Ground) and $C_{GD}$ (Gate-to-Drain).\n    *   **Source Node:** The source is connected directly to ground. Therefore, the capacitor $C_{SB}$ (Source-to-Bulk/Ground) is shorted out and does not affect the circuit's dynamics.\n\n2.  **Determine independent state variables:**\n    *   The state of this circuit is defined by the voltages at the independent nodes where charge can be stored.\n    *   There are two such nodes: the **Gate node** and the **Drain node**.\n    *   While there are three relevant capacitors ($C_{GS}$, $C_{GD}$, and $C_{DB}$), they are connected in a way that their voltages are not all independent. Specifically, if you know the voltage at the Gate ($V_G$) and the voltage at the Drain ($V_D$), the voltages across all three capacitors are determined ($V_{CGS} = V_G$, $V_{CDB} = V_D$, and $V_{CGD} = V_G - V_D$).\n    *   Since there are **two independent node voltages** ($V_G$ and $V_D$) that can change independently over time, the system is of the second order.\n\n3.  **Conclusion:**\n    *   A second-order system has a transfer function with a second-degree polynomial in the denominator.\n    *   The number of poles is equal to the degree of this denominator polynomial.\n\nTherefore, the circuit has **2 poles**.",
        "format": "markdown",
        "sha256": "9c887bb26b72985f91e005c574de0e132fc58af43d8d3cf2be5466d905caf47f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles, notes that CSB is shorted out, and explains that the remaining three capacitor voltages are determined by two independent node voltages.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1541,
        "total_tokens": 2633,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1541,
        "total_tokens": 2633,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Common-Gate (CG) amplifier with negative feedback**. Below is a detailed analysis of its operation, feedback topology, and performance characteristics.\n\n### 1. Circuit Identification\n*   **Transistor Configuration:** The MOSFET $M_1$ is in a common-gate configuration because the input signal $V_{in}$ is applied to the **source** terminal and the output signal $V_{out}$ is taken from the **drain** terminal.\n*   **Feedback Network:** Resistors $R_1$ and $R_2$ form a voltage divider that samples the output voltage $V_{out}$ and feeds a portion of it, $V_F$, back to the **gate** of the transistor.\n\n### 2. Feedback Topology\nTo analyze the feedback, we look at how the signal is sampled at the output and mixed at the input:\n*   **Sampling (Output):** The feedback network is connected in parallel with the output node. It samples the output **voltage**. This is a **shunt** connection at the output.\n*   **Mixing (Input):** The feedback voltage $V_F$ is applied to the gate, while the input $V_{in}$ is at the source. The transistor is controlled by the gate-source voltage, $V_{GS} = V_G - V_S = V_F - V_{in}$. Since $V_F$ and $V_{in}$ are in series with the gate-source junction, this is **series mixing**.\n*   **Conclusion:** The circuit uses **voltage-series (series-shunt)** negative feedback.\n\n### 3. Gain Analysis\nLet $g_m$ be the transconductance of the MOSFET $M_1$.\n*   **Feedback Factor ($\\beta$):** The fraction of the output voltage fed back to the gate is:\n    $$\\beta = \\frac{V_F}{V_{out}} = \\frac{R_2}{R_1 + R_2}$$\n*   **Open-Loop Gain ($A$):** Without feedback (but considering the loading of $R_1$ and $R_2$), the gain of a common-gate stage is approximately:\n    $$A \\approx g_m \\cdot [R_D \\parallel (R_1 + R_2)]$$\n*   **Closed-Loop Gain ($A_f$):** Using the standard feedback formula $A_f = \\frac{A}{1 + A\\beta}$, the gain from $V_{in}$ to $V_{out}$ is:\n    $$A_v = \\frac{V_{out}}{V_{in}} = \\frac{g_m R_L'}{1 + g_m R_L' \\beta} \\quad \\text{where } R_L' = R_D \\parallel (R_1 + R_2)$$\n*   **Ideal Gain:** If the loop gain ($A\\beta$) is much greater than 1, the gain is determined solely by the feedback network:\n    $$A_v \\approx \\frac{1}{\\beta} = \\frac{R_1 + R_2}{R_2} = 1 + \\frac{R_1}{R_2}$$\n    This shows the circuit acts as a **non-inverting amplifier** with a stable gain.\n\n### 4. Input and Output Impedance\nNegative feedback significantly alters the impedances of the basic common-gate stage:\n*   **Input Impedance ($R_{in}$):** A standard CG stage has a low input impedance ($\\approx 1/g_m$). Because of the **series mixing** at the input, the feedback **increases** the input impedance by the factor $(1 + A\\beta)$, making it much higher and easier to drive.\n    $$R_{in,f} \\approx \\frac{1}{g_m}(1 + A\\beta)$$\n*   **Output Impedance ($R_{out}$):** A standard CG stage has an output impedance of approximately $R_D$. Because of the **shunt sampling** at the output, the feedback **decreases** the output impedance by the factor $(1 + A\\beta)$, allowing it to drive heavier loads more effectively.\n    $$R_{out,f} \\approx \\frac{R_D}{1 + A\\beta}$$\n\n### Summary\nThis circuit is a high-performance **non-inverting amplifier**. By applying negative feedback to a common-gate stage, it achieves a stable, predictable voltage gain ($1 + R_1/R_2$), while simultaneously improving the circuit by increasing its input impedance and decreasing its output impedance.",
        "format": "markdown",
        "sha256": "67b30c34ed2c7710243789e0e184a97fdb7eb1c9f474380df3feeedf6855e8a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and gives the correct closed-loop gain and large-loop-gain limit. Impedance discussion is not required and does not contradict the essential model.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 7574,
        "total_tokens": 8662,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6581,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 7574,
        "total_tokens": 8662,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6581,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **Common-Gate (CG) amplifier with negative feedback**. Here is a detailed analysis of its operation, feedback configuration, and small-signal characteristics.\n\n### 1. Circuit Identification\n*   **Transistor Configuration:** The input signal $V_{in}$ is applied to the **source** of the NMOS transistor $M_1$, and the output $V_{out}$ is taken from the **drain**. This is the characteristic of a Common-Gate amplifier.\n*   **Feedback Network:** Resistors $R_1$ and $R_2$ form a voltage divider that samples the output voltage $V_{out}$ and feeds a fraction of it, $V_F$, back to the **gate** of $M_1$.\n\n### 2. Feedback Analysis\n*   **Type of Feedback:** This is a **Voltage-Series** feedback configuration.\n    *   **Voltage Sampling:** The feedback network is connected in parallel with the output, sampling the output voltage.\n    *   **Series Mixing:** The feedback voltage $V_F$ is applied to the gate, while the input $V_{in}$ is at the source. The effective input to the transistor is the gate-source voltage $V_{GS} = V_F - V_{in}$. Since $V_F$ and $V_{in}$ are in series with respect to the gate-source junction, it is series mixing.\n*   **Feedback Factor ($\\beta$):** The fraction of the output voltage fed back to the gate is:\n    $$\\beta = \\frac{V_F}{V_{out}} = \\frac{R_2}{R_1 + R_2}$$\n*   **Nature of Feedback:** It is **negative feedback**. If $V_{in}$ increases, $V_{GS}$ decreases ($V_{GS} = V_G - V_{in}$), which reduces the drain current $I_D$. A lower $I_D$ causes $V_{out}$ to increase ($V_{out} = V_{DD} - I_D R_D$). As $V_{out}$ increases, $V_F$ (and thus $V_G$) increases, which tends to increase $V_{GS}$, opposing the initial change.\n\n### 3. Small-Signal Gain\nAssuming the transistor is in saturation and ignoring the channel-length modulation ($r_o \\to \\infty$):\n*   The open-loop gain of a CG amplifier is $A \\approx g_m R_D$ (assuming $R_1+R_2 \\gg R_D$).\n*   The closed-loop gain $A_v$ is given by the standard feedback formula:\n    $$A_v = \\frac{V_{out}}{V_{in}} = \\frac{A}{1 + A\\beta} \\approx \\frac{g_m R_D}{1 + g_m R_D \\left(\\frac{R_2}{R_1 + R_2}\\right)}$$\n*   If the loop gain ($A\\beta$) is very large, the gain simplifies to:\n    $$A_v \\approx \\frac{1}{\\beta} = \\frac{R_1 + R_2}{R_2} = 1 + \\frac{R_1}{R_2}$$\n    This shows that the gain is primarily determined by the resistor ratio, making it highly stable against variations in transistor parameters ($g_m$).\n\n### 4. Input and Output Impedance\n*   **Input Impedance ($R_{in}$):** In a standard CG amplifier, $R_{in} \\approx 1/g_m$. Series mixing **increases** the input impedance by the factor $(1 + A\\beta)$:\n    $$R_{in, feedback} \\approx \\frac{1}{g_m} (1 + g_m R_D \\beta) = \\frac{1}{g_m} + R_D \\beta$$\n*   **Output Impedance ($R_{out}$):** In a standard CG amplifier, $R_{out} \\approx R_D$. Voltage sampling **decreases** the output impedance:\n    $$R_{out, feedback} \\approx \\frac{R_D}{1 + g_m R_D \\beta}$$\n\n### Summary\nThis circuit uses negative feedback to transform a standard Common-Gate amplifier (which typically has low input impedance and gain sensitive to $g_m$) into a more stable amplifier with:\n1.  **Stable Voltage Gain** defined by $1 + R_1/R_2$.\n2.  **Increased Input Impedance**, which reduces loading on the previous stage.\n3.  **Decreased Output Impedance**, which improves its ability to drive loads.",
        "format": "markdown",
        "sha256": "9e0e891a34474f4dd884dbc6030a17dc3a0446bfd09b7d2077fc9fff94af7df9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. Its closed-loop gain and large-loop-gain resistor-ratio result are correct; the impedance discussion is secondary.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5397,
        "total_tokens": 6485,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4379,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5397,
        "total_tokens": 6485,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4379,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Gate (CG) amplifier** with a feedback network. \n*   **Input ($V_{in}$):** Applied to the **source** of the NMOS transistor $M_1$.\n*   **Output ($V_{out}$):** Taken from the **drain** of $M_1$.\n*   **Feedback Network:** Resistors $R_1$ and $R_2$ form a voltage divider that samples the output voltage $V_{out}$ and feeds a fraction of it back to the **gate** of $M_1$.\n\n### 2. Feedback Analysis\n*   **Feedback Type:** This is a **voltage-voltage (series-shunt)** negative feedback configuration.\n    *   **Voltage Sampling (Shunt at output):** The feedback network is connected in parallel with the output, sampling the output voltage $V_{out}$.\n    *   **Voltage Summing (Series at input):** The feedback voltage $V_F$ is applied to the gate, effectively appearing in series with the input signal $V_{in}$ within the gate-source loop ($V_{GS} = V_G - V_S = V_F - V_{in}$).\n*   **Feedback Factor ($\\beta$):** The fraction of the output voltage fed back to the gate is:\n    $$\\beta = \\frac{V_F}{V_{out}} = \\frac{R_2}{R_1 + R_2}$$\n*   **Nature of Feedback:** It is **negative feedback**. If $V_{out}$ increases, $V_F$ increases, which increases $V_{GS}$. An increase in $V_{GS}$ leads to a higher drain current $I_D$, which causes a larger voltage drop across $R_D$, thereby pulling $V_{out}$ back down.\n\n### 3. Small-Signal Voltage Gain ($A_v$)\nLet $g_m$ be the transconductance of transistor $M_1$ and assume the output resistance $r_o$ is very large.\n*   **Open-Loop Gain ($A$):** For a standard CG amplifier with a load $R_L' = R_D \\parallel (R_1 + R_2)$, the gain is $A = g_m R_L'$.\n*   **Closed-Loop Gain ($A_v$):** Using the general feedback formula $A_v = \\frac{A}{1 + A\\beta}$:\n    $$A_v = \\frac{V_{out}}{V_{in}} = \\frac{g_m R_L'}{1 + g_m \\beta R_L'}$$\n*   **Ideal Gain:** If the loop gain ($g_m \\beta R_L'$) is much greater than 1, the gain is determined solely by the feedback network:\n    $$A_v \\approx \\frac{1}{\\beta} = \\frac{R_1 + R_2}{R_2} = 1 + \\frac{R_1}{R_2}$$\n    This shows the circuit acts as a **non-inverting amplifier** with a stable gain.\n\n### 4. Input and Output Impedance\n*   **Input Impedance ($R_{in}$):** In a standard CG amplifier, $R_{in} \\approx 1/g_m$. Because this circuit uses **series feedback** at the input, the input impedance **increases**:\n    $$R_{in} = \\frac{1}{g_m} (1 + g_m \\beta R_L') = \\frac{1}{g_m} + \\beta R_L'$$\n*   **Output Impedance ($R_{out}$):** Because the circuit uses **shunt feedback** at the output, the output impedance **decreases**:\n    $$R_{out} = \\frac{R_L'}{1 + g_m \\beta R_L'}$$\n\n### Summary\nThis circuit configuration is used to create a non-inverting amplifier with a very stable gain that is relatively independent of the transistor's specific parameters (like $g_m$). The feedback also helps in linearizing the amplifier and extending its bandwidth, at the cost of increased input impedance compared to a standard common-gate stage.",
        "format": "markdown",
        "sha256": "2068260ebd96cb285e95c56126c4e53e5a455af67db1b5097ebc45a001c6857d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative-feedback polarity, and gives the correct closed-loop gain. The optional impedance discussion does not affect the score.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5137,
        "total_tokens": 6225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4201,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5137,
        "total_tokens": 6225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4201,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit is a **Source Follower** (also known as a **Common-Drain Amplifier**) with an **NMOS current-source load**.\n\n*   **$M_1$ (Input Transistor):** This is the main amplifying transistor in a source-follower configuration. The input signal $V_{in}$ is applied to its gate, and the output $V_{out}$ is taken from its source.\n*   **$M_2$ (Current-Source Load):** This transistor acts as a constant current source (or sink). Its gate is tied to a constant bias voltage $V_b$, which sets the DC current flowing through the branch.\n\n### 2. DC Analysis\n*   **Current:** Transistor $M_2$ is biased to operate in the saturation region, providing a relatively constant current $I_D$.\n*   **Output Voltage:** The output voltage \"follows\" the input voltage with a DC level shift. Specifically, $V_{out} = V_{in} - V_{GS1}$. Since $V_{GS1}$ is relatively constant for a given current, $V_{out}$ tracks changes in $V_{in}$.\n*   **Operating Region:** For proper operation, both transistors should remain in the saturation region.\n    *   For $M_1$: $V_{DS1} \\ge V_{GS1} - V_{th1} \\Rightarrow V_{DD} - V_{out} \\ge V_{in} - V_{out} - V_{th1} \\Rightarrow V_{DD} \\ge V_{in} - V_{th1}$.\n    *   For $M_2$: $V_{DS2} \\ge V_{GS2} - V_{th2} \\Rightarrow V_{out} \\ge V_b - V_{th2}$.\n\n### 3. Small-Signal Analysis\n*   **Voltage Gain ($A_v$):** The small-signal voltage gain is given by:\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1} || r_{o2}}}$$\n    Where:\n    *   $g_{m1}$ is the transconductance of $M_1$.\n    *   $g_{mb1}$ is the body-effect transconductance of $M_1$ (since its source is not at ground).\n    *   $r_{o1}$ and $r_{o2}$ are the output resistances of $M_1$ and $M_2$.\n\n    In an ideal case where $r_o$ is very large and body effect is neglected, the gain is **approximately 1**. In practice, due to the body effect, the gain is typically around $0.7$ to $0.9$.\n\n*   **Input Impedance ($R_{in}$):** Looking into the gate of $M_1$, the impedance is ideally **infinite** at low frequencies ($R_{in} \\to \\infty$).\n*   **Output Impedance ($R_{out}$):** The output impedance is low, which is the primary advantage of this circuit:\n    $$R_{out} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n    This low output impedance allows the circuit to drive heavy (low-resistance) loads without significant signal attenuation.\n\n### 4. Key Characteristics and Applications\n*   **High Input Impedance:** Does not load the preceding stage.\n*   **Low Output Impedance:** Excellent for driving low-impedance loads.\n*   **Unity Gain:** It does not provide voltage amplification but acts as a **buffer**.\n*   **Level Shifter:** It can be used to shift the DC level of a signal downward by $V_{GS1}$.\n*   **Current Source Load Advantage:** Using $M_2$ as a current source instead of a simple resistor provides a higher output impedance for the load, which improves the gain linearity and makes the gain closer to unity.",
        "format": "markdown",
        "sha256": "e01862c1a8c91a5885818cd34274528aea7ba696f6e8c1acdd5c57e6857a36df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as its current-source load, and gives a positive gain at or below unity with body effect and output resistances included. The omitted output-resistance terms are a minor approximation.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2275,
        "total_tokens": 3385,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2275,
        "total_tokens": 3385,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit is a **Source Follower**, also known as a **Common-Drain Amplifier**, with a **current-source load**. It consists of two NMOS transistors, $M_1$ and $M_2$.\n\n*   **$M_1$ (Input Transistor):** This transistor is in a common-drain configuration. The input signal $V_{in}$ is applied to its gate, and the output $V_{out}$ is taken from its source.\n*   **$M_2$ (Current-Source Load):** The gate of $M_2$ is connected to a constant bias voltage $V_b$. This makes $M_2$ act as a constant current source, providing a high-impedance load for $M_1$.\n\n### 2. Small-Signal Analysis\nTo understand the performance of the amplifier, we look at its key small-signal parameters:\n\n*   **Voltage Gain ($A_v$):**\n    The gain of a source follower is typically slightly less than unity (1). The exact formula, considering the body effect and finite output resistance, is:\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1} \\parallel r_{o2}}}$$\n    Where:\n    *   $g_{m1}$ is the transconductance of $M_1$.\n    *   $g_{mb1}$ is the body-effect transconductance of $M_1$ (since its source is not at ground).\n    *   $r_{o1}$ and $r_{o2}$ are the output resistances of $M_1$ and $M_2$, respectively.\n    *   If we ignore the body effect and assume high output resistances, $A_v \\approx 1$.\n\n*   **Input Impedance ($R_{in}$):**\n    Because the input is at the gate of a MOSFET, the input impedance is **very high** (ideally infinite at low frequencies), meaning it draws almost no current from the signal source.\n\n*   **Output Impedance ($R_{out}$):**\n    Looking into the output node, we see the source of $M_1$ in parallel with the drain of $M_2$.\n    $$R_{out} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n    This results in a **low output impedance**, which is a primary characteristic of this circuit.\n\n### 3. Key Features and Applications\n*   **Voltage Buffer:** Due to its high input impedance and low output impedance, this circuit is primarily used as a buffer. it can drive low-impedance loads without significantly loading the preceding stage.\n*   **Level Shifter:** The output voltage is shifted down from the input voltage by the gate-source voltage of $M_1$ ($V_{out} = V_{in} - V_{GS1}$). This is often used in multi-stage amplifiers to adjust DC bias levels.\n*   **No Phase Inversion:** Unlike a common-source amplifier, the output signal is in phase with the input signal.\n\n### Summary Table\n| Parameter | Characteristic |\n| :--- | :--- |\n| **Topology** | Common-Drain (Source Follower) |\n| **Voltage Gain** | $\\approx 1$ (Positive, non-inverting) |\n| **Input Impedance** | Very High |\n| **Output Impedance** | Low |\n| **Primary Use** | Voltage buffering, Level shifting |",
        "format": "markdown",
        "sha256": "54141d5e526605983ff82019db0ceb92cf908526038d4e9534f07671c18a073c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and current-source load, and gives a positive gain slightly below unity with body effect and finite output resistance. The output-resistance approximation is reasonable.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2247,
        "total_tokens": 3357,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2247,
        "total_tokens": 3357,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is an **NMOS Source Follower** (also known as a **Common-Drain Amplifier**) with an **active current-source load**.\n\n*   **$M_1$ (Top Transistor):** This is the input transistor. The input signal $V_{in}$ is applied to its gate, and the output $V_{out}$ is taken from its source.\n*   **$M_2$ (Bottom Transistor):** This transistor acts as a constant current source. Its gate is connected to a fixed bias voltage $V_b$, which sets the DC current flowing through the circuit.\n\n### 2. Small-Signal Analysis\nIn a small-signal regime, we can determine the key performance parameters of the amplifier:\n\n*   **Voltage Gain ($A_v$):** The gain is positive and slightly less than unity (1).\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}}$$\n    Where:\n    *   $g_{m1}$ is the transconductance of $M_1$.\n    *   $g_{mb1}$ is the body-effect transconductance (since the source of $M_1$ is not at ground).\n    *   $r_{o1}$ and $r_{o2}$ are the output resistances of $M_1$ and $M_2$ due to channel-length modulation.\n*   **Input Resistance ($R_{in}$):** Ideally infinite at low frequencies because the input is connected to the insulated gate of an NMOS transistor.\n*   **Output Resistance ($R_{out}$):** The circuit has a very low output resistance, which is one of its primary advantages.\n    $$R_{out} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n### 3. Large-Signal Behavior\n*   **Input-Output Relationship:** The output voltage \"follows\" the input voltage, shifted down by the gate-to-source voltage of $M_1$:\n    $$V_{out} = V_{in} - V_{GS1}$$\n*   **Operating Range:**\n    *   For $M_2$ to act as a current source, it must remain in the **saturation region**, meaning $V_{out} > V_b - V_{th2}$.\n    *   For $M_1$ to stay in saturation, $V_{in} - V_{out} > V_{th1}$ and $V_{DD} - V_{out} > V_{in} - V_{out} - V_{th1}$.\n    *   The maximum output voltage is limited by $V_{DD}$ (minus a small drop across $M_1$), and the minimum is limited by the compliance voltage of the $M_2$ current source.\n\n### 4. Summary and Applications\n*   **Function:** It acts as a **voltage buffer**. It provides high input impedance (to avoid loading the previous stage) and low output impedance (to drive heavy loads or low-resistance stages).\n*   **Key Characteristics:**\n    *   High input impedance.\n    *   Low output impedance.\n    *   Unity voltage gain (approximate).\n    *   No phase inversion (input and output are in phase).\n*   **Common Use:** Often used as the final stage in an amplifier chain to drive a low-impedance load or as a level shifter.",
        "format": "markdown",
        "sha256": "228ebd103557f828210fee437eecc92540588c31d3d3609ab92c6ccbd00f45ab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, and gives the positive, slightly sub-unity gain with the appropriate body-effect and output-resistance terms. This meets the full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2325,
        "total_tokens": 3435,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1509,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2325,
        "total_tokens": 3435,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1509,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Identification\nThe circuit shown is a **CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**. It is the fundamental building block of digital integrated circuits, used to perform the logical NOT operation.\n\n### 2. Circuit Components\n*   **$M_1$ (NMOS Transistor):** The bottom transistor is an N-channel MOSFET. Its source is connected to ground, its gate to the input ($V_{in}$), and its drain to the output ($V_{out}$).\n*   **$M_2$ (PMOS Transistor):** The top transistor is a P-channel MOSFET. Its source is connected to the supply voltage ($V_{DD}$), its gate to the input ($V_{in}$), and its drain to the output ($V_{out}$).\n*   **$V_{in}$:** The common input signal applied to both gates.\n*   **$V_{out}$:** The output signal taken from the common drain connection.\n\n### 3. Principle of Operation (Logic Levels)\nThe circuit operates by switching one transistor ON while the other is OFF, depending on the input voltage:\n\n*   **When $V_{in}$ is Low (Logic '0', e.g., 0V):**\n    *   **$M_1$ (NMOS)** is **OFF** because its gate-to-source voltage ($V_{GS1}$) is below its threshold voltage ($V_{thn}$).\n    *   **$M_2$ (PMOS)** is **ON** because its gate-to-source voltage ($V_{GS2} = -V_{DD}$) is more negative than its threshold voltage ($V_{thp}$).\n    *   The output node is pulled up to $V_{DD}$ through $M_2$. Thus, **$V_{out} \\approx V_{DD}$ (Logic '1')**.\n\n*   **When $V_{in}$ is High (Logic '1', e.g., $V_{DD}$):**\n    *   **$M_1$ (NMOS)** is **ON** because $V_{GS1} = V_{DD}$, which is greater than $V_{thn}$.\n    *   **$M_2$ (PMOS)** is **OFF** because $V_{GS2} = 0V$, which is not negative enough to turn it on.\n    *   The output node is pulled down to ground through $M_1$. Thus, **$V_{out} \\approx 0V$ (Logic '0')**.\n\n### 4. Small-Signal Analysis (Analog Gain)\nIf used as an analog amplifier (biased in the transition region where both transistors are in saturation), the small-signal voltage gain ($A_v$) is given by:\n$$A_v = \\frac{v_{out}}{v_{in}} = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$$\nWhere:\n*   $g_{m1}, g_{m2}$ are the transconductances of the transistors.\n*   $r_{o1}, r_{o2}$ are the output resistances due to channel-length modulation.\n\n### 5. Key Characteristics\n*   **High Input Impedance:** Since the input is connected to the gates of MOSFETs, it draws virtually no DC current.\n*   **Low Static Power Consumption:** In either steady state (High or Low), one of the transistors is always OFF, meaning there is no direct path from $V_{DD}$ to ground. Power is primarily consumed only during switching.\n*   **Rail-to-Rail Swing:** The output can swing fully from $0V$ to $V_{DD}$, providing excellent noise margins for digital logic.",
        "format": "markdown",
        "sha256": "d211ba53e3becb01f4fde309009f30508584d473ca19a8a4f479c7dcf7e13be9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and their operation at both logic levels. The optional small-signal gain expression is also correct.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2108,
        "total_tokens": 3218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1281,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2108,
        "total_tokens": 3218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1281,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Identification\nThe circuit shown is a **CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**. It is the fundamental building block of digital integrated circuits.\n\n### 2. Components\n*   **$M_1$ (NMOS Transistor):** The bottom transistor is an n-channel MOSFET. Its source is connected to ground, its gate to the input ($V_{in}$), and its drain to the output ($V_{out}$).\n*   **$M_2$ (PMOS Transistor):** The top transistor is a p-channel MOSFET (indicated by the bubble or arrow direction). Its source is connected to the supply voltage ($V_{DD}$), its gate to the input ($V_{in}$), and its drain to the output ($V_{out}$).\n\n### 3. Operational Analysis\nThe circuit operates by switching between the two transistors depending on the input voltage level:\n\n*   **When $V_{in}$ is Low (Logic '0', near 0V):**\n    *   **$M_1$ (NMOS)** is **OFF** because its gate-to-source voltage ($V_{GS1}$) is below its threshold voltage.\n    *   **$M_2$ (PMOS)** is **ON** because its gate-to-source voltage ($V_{GS2} = V_{in} - V_{DD}$) is strongly negative, creating a conductive path from $V_{DD}$ to the output.\n    *   **Result:** The output $V_{out}$ is pulled up to **$V_{DD}$ (Logic '1')**.\n\n*   **When $V_{in}$ is High (Logic '1', near $V_{DD}$):**\n    *   **$M_1$ (NMOS)** is **ON** because $V_{GS1}$ is high, creating a conductive path from the output to ground.\n    *   **$M_2$ (PMOS)** is **OFF** because $V_{GS2}$ is near 0V, which is above its threshold.\n    *   **Result:** The output $V_{out}$ is pulled down to **Ground (Logic '0')**.\n\n### 4. Summary of Characteristics\n*   **Logic Function:** It performs a logical **NOT** operation.\n*   **Static Power Consumption:** Extremely low. In either steady state (High or Low), one of the transistors is always OFF, meaning there is no direct path for current to flow from $V_{DD}$ to ground.\n*   **Input Impedance:** Very high, as the gates of the MOSFETs are insulated by a layer of silicon dioxide.\n*   **Voltage Gain:** In the transition region (where $V_{in} \\approx V_{DD}/2$), both transistors are ON and in saturation. The small-signal voltage gain is given by:\n    $$A_v = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$$\n    where $g_m$ is transconductance and $r_o$ is output resistance. This makes it a high-gain amplifier in its linear region.",
        "format": "markdown",
        "sha256": "1cb9acf5ed75d79b7d8535049c520ccdad9f35c5d224c12424c4554593668715"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and explains the complementary switching and output behavior. The optional gain analysis is also consistent with the golden solution.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 1741,
        "total_tokens": 2851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1046,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 1741,
        "total_tokens": 2851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1046,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Inverter**, which is the fundamental building block of digital integrated circuits. It consists of two complementary metal-oxide-semiconductor (CMOS) transistors.\n\n### 2. Component Breakdown\n*   **$M_1$ (NMOS Transistor):** The bottom transistor is an n-channel MOSFET. Its source is connected to ground (0V). It acts as a \"pull-down\" device.\n*   **$M_2$ (PMOS Transistor):** The top transistor is a p-channel MOSFET (indicated by the arrow pointing into the gate/source area). Its source is connected to the positive supply voltage, $V_{DD}$. It acts as a \"pull-up\" device.\n*   **$V_{in}$ (Input):** The input signal is applied to the gates of both transistors simultaneously.\n*   **$V_{out}$ (Output):** The output is taken from the common node connecting the drains of both transistors.\n\n### 3. Principles of Operation\nThe circuit functions as a logic **NOT gate**. Its operation depends on the input voltage level:\n\n*   **When $V_{in}$ is Low (Logic 0 / Ground):**\n    *   **$M_1$ (NMOS)** is **OFF** because its gate-to-source voltage ($V_{GS}$) is zero, which is below its threshold voltage.\n    *   **$M_2$ (PMOS)** is **ON** because its gate-to-source voltage is $-V_{DD}$, which is strongly negative and exceeds its threshold.\n    *   Since $M_2$ is conducting and $M_1$ is not, the output $V_{out}$ is pulled up to **$V_{DD}$ (Logic 1)**.\n\n*   **When $V_{in}$ is High (Logic 1 / $V_{DD}$):**\n    *   **$M_1$ (NMOS)** is **ON** because its gate-to-source voltage is $V_{DD}$, which is above its threshold.\n    *   **$M_2$ (PMOS)** is **OFF** because its gate-to-source voltage is $0V$, which is below its threshold.\n    *   Since $M_1$ is conducting and $M_2$ is not, the output $V_{out}$ is pulled down to **Ground (Logic 0)**.\n\n### 4. Key Characteristics\n*   **Inversion:** The output is always the logical complement of the input.\n*   **High Input Impedance:** Because the input is connected to the insulated gates of the MOSFETs, it draws virtually no DC current.\n*   **Low Static Power Consumption:** In either steady state (High or Low), one of the transistors is always OFF. This means there is no direct path from $V_{DD}$ to ground, resulting in extremely low power consumption when the circuit is not switching.\n*   **Rail-to-Rail Output:** The output voltage can swing fully from $0V$ to $V_{DD}$, providing excellent noise margins for digital logic.",
        "format": "markdown",
        "sha256": "6335fea09329aa71b0c37d446b905c76c6bfd24eb086a5b5179a4aa4767a9e8e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and explains the complementary switching operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 1770,
        "total_tokens": 2880,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 1770,
        "total_tokens": 2880,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit consists of two **N-channel MOSFETs (NMOS)**, labeled $M_1$ and $M_2$, connected in a push-pull configuration. \n* **$M_1$ (Top Transistor):** This is an NMOS transistor in a **source-follower** (common-drain) configuration. Its drain is connected to the supply voltage $V_{DD}$, its gate is connected to the input $V_{in}$, and its source is connected to the output $V_{out}$.\n* **$M_2$ (Bottom Transistor):** This is an NMOS transistor in a **common-source** configuration. Its drain is connected to the output $V_{out}$, its gate is connected to the input $V_{in}$, and its source is connected to ground.\n\n### 2. DC Operation and Functionality\nThis circuit is an **NMOS-only push-pull stage**. Unlike a standard CMOS inverter which uses complementary transistors (one PMOS and one NMOS), this circuit uses two of the same type.\n\n* **When $V_{in}$ is Low ($V_{in} < V_{th}$):** Both transistors are in the cutoff region. The output $V_{out}$ is in a high-impedance state (floating), assuming no external load.\n* **When $V_{in}$ is High ($V_{in} > V_{th}$):** Both transistors turn on. \n    * $M_1$ acts as a source follower, attempting to pull $V_{out}$ up toward $V_{DD} - V_{th1}$.\n    * $M_2$ acts as a common-source amplifier, attempting to pull $V_{out}$ down toward ground.\n* **The \"Fighting\" Effect:** Because both transistors are driven by the same input signal, they work in opposition. $M_1$ tries to increase $V_{out}$ while $M_2$ tries to decrease it. The final value of $V_{out}$ is determined by the relative sizes (W/L ratios) of the two transistors.\n\n### 3. Small-Signal Analysis (Voltage Gain)\nTo find the small-signal voltage gain ($A_v = v_{out} / v_{in}$), we can look at the currents at the output node. Neglecting body effect and channel length modulation for simplicity:\n* Current from $M_1$: $i_{d1} = g_{m1}(v_{in} - v_{out})$\n* Current into $M_2$: $i_{d2} = g_{m2}v_{in}$\n\nSetting $i_{d1} = i_{d2}$ (assuming no external load current):\n$$g_{m1}(v_{in} - v_{out}) = g_{m2}v_{in}$$\n$$(g_{m1} - g_{m2})v_{in} = g_{m1}v_{out}$$\n$$A_v = \\frac{v_{out}}{v_{in}} = 1 - \\frac{g_{m2}}{g_{m1}}$$\n\n* If **$g_{m1} > g_{m2}$**, the circuit acts as a **non-inverting buffer** with a gain less than 1.\n* If **$g_{m2} > g_{m1}$**, the circuit acts as an **inverting amplifier**.\n\n### 4. Key Characteristics\n* **Output Swing:** The maximum output voltage is limited to $V_{DD} - V_{th1}$ due to the NMOS source follower ($M_1$). It cannot reach the full $V_{DD}$ rail.\n* **Power Consumption:** This circuit has high static power dissipation. When $V_{in}$ is high, there is a direct current path from $V_{DD}$ to ground through both transistors.\n* **Applications:** This configuration is rare in modern standard CMOS logic but can be found in specific analog blocks or in older NMOS-only technologies (like the 6502 processor) where it served as a basic building block for output drivers.\n\n**Note on Symbols:** While the top transistor in a standard logic inverter is usually a PMOS, the arrow on $M_1$ in this diagram points **out** of the transistor at the source terminal ($V_{out}$), which is the standard symbol for an **NMOS**. If it were a PMOS, the arrow would typically be at the $V_{DD}$ terminal pointing into the transistor.",
        "format": "markdown",
        "sha256": "09776951988dac096ebe151ee87a945a9fd09ecc33ef29d79d2e46bf51efd24e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies both devices as NMOS, describes the upper source-follower and lower pull-down roles, and distinguishes the circuit from a normal CMOS inverter, satisfying the golden solution’s full-credit rule. The optional gain discussion is not needed for full credit.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 9960,
        "total_tokens": 11060,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 9960,
        "total_tokens": 11060,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis:\n\n### 1. Component Identification\n*   **$M_1$ and $M_2$:** Both are **N-channel MOSFETs (NMOS)**. You can identify them by the arrows on their source terminals, which point away from the gate/channel.\n*   **$M_1$ Configuration:** Its drain is connected to $V_{DD}$ and its source is connected to $V_{out}$. This is a **source-follower** (or common-drain) configuration.\n*   **$M_2$ Configuration:** Its drain is connected to $V_{out}$ and its source is connected to ground. This is a **common-source** configuration.\n*   **Input/Output:** Both transistors share the same input signal ($V_{in}$) at their gates and the same output node ($V_{out}$).\n\n### 2. Circuit Operation\nThis circuit is an **NMOS-only push-pull stage**. It operates as follows:\n\n*   **Cutoff Region ($V_{in} < V_{th}$):** If the input voltage is below the threshold voltage ($V_{th}$) of the transistors, both $M_1$ and $M_2$ are OFF. In this state, the output $V_{out}$ is in a high-impedance (floating) state.\n*   **Active Region ($V_{in} > V_{th}$):** When $V_{in}$ rises above $V_{th}$, both transistors turn ON. \n    *   $M_2$ acts as a \"pull-down\" device, trying to pull $V_{out}$ toward ground.\n    *   $M_1$ acts as a \"pull-up\" device, trying to pull $V_{out}$ toward $V_{in} - V_{th1}$.\n    *   The final output voltage $V_{out}$ is determined by the current balance between the two transistors.\n\n### 3. Quantitative Analysis (Voltage Gain)\nAssuming both transistors are in the saturation region and ignoring channel-length modulation ($\\lambda = 0$), the currents must be equal ($I_{D1} = I_{D2}$):\n$$\\frac{1}{2} k_1 (V_{GS1} - V_{th1})^2 = \\frac{1}{2} k_2 (V_{GS2} - V_{th2})^2$$\nSubstituting the voltages from the circuit ($V_{GS1} = V_{in} - V_{out}$ and $V_{GS2} = V_{in}$):\n$$\\sqrt{k_1} (V_{in} - V_{out} - V_{th1}) = \\sqrt{k_2} (V_{in} - V_{th2})$$\nAssuming identical threshold voltages ($V_{th1} = V_{th2} = V_{th}$), we can solve for $V_{out}$:\n$$V_{out} = (V_{in} - V_{th}) \\left( 1 - \\sqrt{\\frac{k_2}{k_1}} \\right)$$\nThe small-signal voltage gain ($A_v$) is:\n$$A_v = \\frac{dV_{out}}{dV_{in}} = 1 - \\sqrt{\\frac{k_2}{k_1}} = 1 - \\frac{g_{m2}}{g_{m1}}$$\n\n### 4. Summary of Behavior\n*   **As a Buffer:** If $M_1$ is much larger than $M_2$ ($k_1 \\gg k_2$), the gain is approximately **+1**. The circuit acts as a source-follower buffer.\n*   **As an Inverter:** If $M_2$ is larger than $M_1$ ($k_2 > k_1$), the gain becomes **negative**. The circuit acts as an inverter. For example, if $k_2 = 4k_1$, the gain is $1 - 2 = -1$.\n*   **Efficiency:** Unlike a standard CMOS inverter, this circuit is relatively power-inefficient because both transistors conduct simultaneously when $V_{in}$ is high, creating a direct current path from $V_{DD}$ to ground. It is typically used in specific NMOS-only logic designs or specialized output stages.",
        "format": "markdown",
        "sha256": "b87041f7f563ca3a8d6f878b8d8d5856938410673d635d6d5536bb4d08f8825e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies both devices as NMOS and recognizes the upper source-follower and lower pull-down actions. However, it incorrectly assumes both devices are saturated and concludes that sizing can make the circuit invert; the lower device operates in triode, and the output has positive gain below one when driven.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 11264,
        "total_tokens": 12364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10331,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 11264,
        "total_tokens": 12364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10331,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is an analysis of its components, configuration, and operation:\n\n### 1. Component Identification\nThe circuit consists of two **n-channel MOSFETs (NMOS)**, labeled $M_1$ and $M_2$.\n*   **$M_1$ (Top Transistor):** The arrow on the source terminal points away from the gate, identifying it as an NMOS. Its drain is connected to the supply voltage $V_{DD}$, its gate is connected to the input $V_{in}$, and its source is connected to the output $V_{out}$.\n*   **$M_2$ (Bottom Transistor):** This is also an NMOS transistor. Its drain is connected to $V_{out}$, its gate is connected to $V_{in}$, and its source is connected to ground.\n\n### 2. Circuit Configuration\nThis configuration is an **NMOS-only push-pull stage** or a **source follower with an active driven load**.\n*   **$M_1$** is in a **source-follower** (common-drain) configuration. It acts as a pull-up device.\n*   **$M_2$** is in a **common-source** configuration. It acts as a pull-down device.\n\n### 3. Principles of Operation\nThe behavior of the circuit depends on the input voltage $V_{in}$ relative to the threshold voltages ($V_{th}$) of the transistors:\n\n*   **Cutoff Region ($V_{in} < V_{th}$):** If the input voltage is below the threshold voltage of both transistors, both $M_1$ and $M_2$ are OFF. In this state, the output $V_{out}$ is in a high-impedance (floating) state.\n*   **Active Region ($V_{in} > V_{th}$):** When $V_{in}$ rises above the threshold, both transistors turn ON and \"compete\" to set the output voltage:\n    *   $M_1$ tries to pull $V_{out}$ up toward $V_{in} - V_{th1}$.\n    *   $M_2$ tries to pull $V_{out}$ down toward ground.\n*   **Output Voltage ($V_{out}$):** The final value of $V_{out}$ is determined by the relative \"strengths\" (W/L ratios) of the two transistors. This is a **ratioed circuit**. \n    *   If $M_1$ is much larger/stronger than $M_2$, the circuit acts primarily as a **source-follower buffer**, and $V_{out}$ will follow $V_{in}$ with a level shift ($V_{out} \\approx V_{in} - V_{GS1}$).\n    *   If $M_2$ is much stronger than $M_1$, the circuit can act as an **inverter**, pulling $V_{out}$ low when $V_{in}$ is high.\n\n### 4. Small-Signal Analysis\nThe small-signal voltage gain ($A_v = v_{out} / v_{in}$) can be approximated as:\n$$A_v \\approx \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + g_{o1} + g_{o2}}$$\nWhere $g_m$ is the transconductance. \n*   If $g_{m1} > g_{m2}$, the circuit is **non-inverting**.\n*   If $g_{m2} > g_{m1}$, the circuit is **inverting**.\n\n### 5. Summary and Applications\n*   **Power Consumption:** Unlike a standard CMOS inverter (which uses a PMOS for the top transistor), this circuit has a direct path from $V_{DD}$ to ground when $V_{in}$ is high, leading to significant **static power consumption**.\n*   **Applications:** This type of stage is sometimes used in NMOS-only technologies or as an output buffer to drive large capacitive loads, where $M_2$ provides a faster pull-down than a simple resistor or constant current source would.\n*   **Note:** If the top transistor $M_1$ were a PMOS (arrow pointing into the source), this would be a standard **CMOS inverter**. However, as drawn with both arrows pointing out, it is an NMOS-NMOS configuration.",
        "format": "markdown",
        "sha256": "b5496cd59b7310d2de0ca87b1a16b5d607a8637a1265b9be2482e294ebb02c43"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies both NMOS devices, their source-follower and pull-down roles, and distinguishes the circuit from a conventional CMOS inverter, meeting the golden full-credit rule. Its extra claim that a stronger M2 can make the circuit invert is inaccurate.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 8428,
        "total_tokens": 9528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7475,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 8428,
        "total_tokens": 9528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7475,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Source (CS) Amplifier with a Diode-Connected PMOS Load**.\n*   **$M_1$ (NMOS):** Acts as the driver transistor. The input signal $V_{in}$ is applied to its gate, and its source is grounded.\n*   **$M_2$ (PMOS):** Acts as the load for the amplifier. It is \"diode-connected\" because its gate is tied to its drain.\n\n### 2. Operating Principle\n*   **Input/Output:** The input voltage $V_{in}$ controls the current flowing through $M_1$. Since $M_1$ and $M_2$ are in series, they share the same drain current ($I_{D1} = I_{D2}$). Changes in $V_{in}$ cause changes in this current, which in turn changes the voltage drop across $M_2$, resulting in an amplified output voltage $V_{out}$ at the common drain node.\n*   **Load Characteristics:** Because $M_2$ is diode-connected, it is always in the **saturation region** when it is conducting (since $|V_{DS}| = |V_{GS}|$, the condition $|V_{DS}| \\ge |V_{GS}| - |V_{TH}|$ is always met). This provides a relatively linear load compared to a simple resistor.\n\n### 3. Small-Signal Analysis (Voltage Gain)\nTo find the voltage gain ($A_v$), we look at the small-signal model:\n*   The small-signal resistance of the diode-connected load $M_2$ is approximately $1/g_{m2}$ (ignoring the body effect and channel-length modulation).\n*   The gain of a common-source amplifier is given by $A_v = -g_{m1} \\cdot R_{load}$.\n*   Substituting the load resistance:\n    $$A_v \\approx -g_{m1} \\cdot \\frac{1}{g_{m2}} = -\\frac{g_{m1}}{g_{m2}}$$\n*   Using the transconductance formula $g_m = \\sqrt{2\\mu C_{ox}(W/L)I_D}$, and knowing $I_{D1} = I_{D2}$, the gain becomes:\n    $$A_v \\approx -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n    *   $\\mu_n, \\mu_p$: Electron and hole mobilities.\n    *   $W/L$: Aspect ratios (width/length) of the transistors.\n\n### 4. Large-Signal Characteristics\n*   **Output Swing:** The output voltage cannot reach the full supply voltage $V_{DD}$. Because $M_2$ needs at least its threshold voltage to turn on, the maximum output voltage is approximately $V_{out,max} \\approx V_{DD} - |V_{THP}|$.\n*   **Linearity:** This configuration is more linear than an NMOS-load amplifier because the square-root terms in the current equations for both transistors partially cancel each other out.\n\n### 5. Summary of Key Features\n*   **Gain Stability:** The gain depends primarily on the geometric ratios $(W/L)$ of the transistors, making it relatively stable against temperature and process variations.\n*   **Input Impedance:** Very high (ideally infinite at DC) because the input is connected to the gate of a MOSFET.\n*   **Output Impedance:** Relatively low, approximately $1/g_{m2}$.\n*   **Application:** Used in integrated circuits where high-precision resistors are difficult to fabricate, and a predictable, moderate gain is required.",
        "format": "markdown",
        "sha256": "94e0e8b29bfe2b841d26fac86b8aca1fe36f4af9c1c44f4b7f6020dda13f5f21"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain −gm1/gm2 with the appropriate square-law ratio. The extra large-signal and application comments do not alter the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2629,
        "total_tokens": 3729,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1807,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2629,
        "total_tokens": 3729,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1807,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit is a **common-source (CS) amplifier with a diode-connected PMOS load**.\n*   **$M_1$** is an **NMOS** transistor acting as the driver.\n*   **$M_2$** is a **PMOS** transistor acting as the load. It is \"diode-connected\" because its gate is tied to its drain.\n\n### 2. Operating Regions\n*   **$M_2$ (Load):** Because the gate and drain are connected ($V_{G2} = V_{D2}$), the condition for saturation ($|V_{DS}| \\ge |V_{GS} - V_{TH}|$) is always met as long as the transistor is conducting. Therefore, $M_2$ is always in the **saturation region** when it is ON.\n*   **$M_1$ (Driver):** For the circuit to operate as a high-gain amplifier, $M_1$ must also be in the **saturation region**. This occurs when $V_{in} > V_{TH1}$ and $V_{out} > V_{in} - V_{TH1}$.\n\n### 3. Large-Signal Analysis\nAssuming both transistors are in saturation and neglecting channel-length modulation ($\\lambda = 0$), the drain currents must be equal ($I_{D1} = I_{D2}$):\n$$\\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{in} - V_{TH1})^2 = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{out} - |V_{TH2}|)^2$$\n\nSolving for $V_{out}$:\n$$V_{out} = V_{DD} - |V_{TH2}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} (V_{in} - V_{TH1})$$\n\n### 4. Small-Signal Voltage Gain\nThe voltage gain ($A_v$) can be derived by differentiating the output voltage with respect to the input voltage, or by using the small-signal model:\n$$A_v = \\frac{v_{out}}{v_{in}} = -g_{m1} \\cdot (r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}})$$\n\nSince the resistance of the diode-connected load ($1/g_{m2}$) is typically much smaller than the output resistances ($r_{o1}, r_{o2}$), the gain simplifies to:\n$$A_v \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\nSubstituting the expressions for transconductance ($g_m = \\sqrt{2\\mu C_{ox} (W/L) I_D}$):\n$$A_v \\approx -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n### 5. Key Characteristics\n*   **Gain Stability:** The gain depends primarily on the geometric ratios (W/L) and process parameters ($\\mu_n, \\mu_p$), making it relatively stable against variations in supply voltage and temperature.\n*   **Linearity:** This circuit is more linear than a CS amplifier with a simple resistor load because the square-law characteristics of both transistors partially cancel each other out.\n*   **Output Swing:** The maximum output voltage is limited to $V_{DD} - |V_{TH2}|$. The minimum output voltage is limited by $M_1$ entering the triode region ($V_{out} \\approx V_{in} - V_{TH1}$).\n*   **Input Impedance:** Very high (ideally infinite at DC) because the input is connected to the gate of a MOSFET.\n*   **Output Impedance:** Relatively low, approximately $1/g_{m2}$.",
        "format": "markdown",
        "sha256": "8a88e0fa922fd7a102fa61a9342fbf9fef6fbe2c272bf2d193f0960828339003"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both output resistances included, as well as the usual −gm1/gm2 approximation.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2573,
        "total_tokens": 3673,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1685,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2573,
        "total_tokens": 3673,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1685,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit is a **common-source (CS) amplifier with a diode-connected PMOS load**.\n*   **$M_1$** is an **NMOS** transistor acting as the driver.\n*   **$M_2$** is a **PMOS** transistor acting as the load. It is \"diode-connected\" because its gate is tied to its drain.\n\n### 2. Operating Regions\n*   **$M_2$ (Load):** Because the gate and drain are connected ($V_{G2} = V_{D2}$), the condition for saturation ($|V_{DS}| \\ge |V_{GS} - V_{TH}|$) is always met as long as the transistor is conducting. Therefore, $M_2$ is always in the **saturation region** when it is ON.\n*   **$M_1$ (Driver):** For the circuit to operate as a high-gain amplifier, $M_1$ must also be in the **saturation region**. This occurs when $V_{in} > V_{TH1}$ and $V_{out} > V_{in} - V_{TH1}$.\n\n### 3. Large-Signal Analysis\nAssuming both transistors are in saturation and neglecting channel-length modulation ($\\lambda = 0$), the drain currents must be equal ($I_{D1} = I_{D2}$):\n$$\\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{in} - V_{TH1})^2 = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{out} - |V_{TH2}|)^2$$\n\nSolving for $V_{out}$:\n$$V_{out} = V_{DD} - |V_{TH2}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} (V_{in} - V_{TH1})$$\n\n### 4. Small-Signal Voltage Gain\nThe voltage gain ($A_v$) can be derived by differentiating the output voltage with respect to the input voltage, or by using the small-signal model:\n$$A_v = \\frac{v_{out}}{v_{in}} = -g_{m1} \\cdot (r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}})$$\n\nSince the resistance of the diode-connected load ($1/g_{m2}$) is typically much smaller than the output resistances ($r_{o1}, r_{o2}$), the gain simplifies to:\n$$A_v \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\nSubstituting the expressions for transconductance ($g_m = \\sqrt{2\\mu C_{ox} (W/L) I_D}$):\n$$A_v \\approx -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n### 5. Key Characteristics\n*   **Gain Stability:** The gain depends primarily on the geometric ratios (W/L) and process parameters ($\\mu_n, \\mu_p$), making it relatively stable against variations in supply voltage and temperature.\n*   **Linearity:** This circuit is more linear than a CS amplifier with a simple resistor load because the square-law characteristics of both transistors partially cancel each other out.\n*   **Output Swing:** The maximum output voltage is limited to $V_{DD} - |V_{TH2}|$. The minimum output voltage is limited by $M_1$ entering the triode region ($V_{out} \\approx V_{in} - V_{TH1}$).\n*   **Input Impedance:** Very high (ideally infinite at DC) because the input is connected to the gate of a MOSFET.\n*   **Output Impedance:** Relatively low, approximately $1/g_{m2}$.",
        "format": "markdown",
        "sha256": "8a88e0fa922fd7a102fa61a9342fbf9fef6fbe2c272bf2d193f0960828339003"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both output resistances included, as well as the usual −gm1/gm2 approximation.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2573,
        "total_tokens": 3673,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1685,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2573,
        "total_tokens": 3673,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1685,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is an analysis of its components and operation:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Source (CS) Amplifier** with an active load. \n*   **$M_2$** is the **driver transistor**. It is a **PMOS** transistor, identified by the arrow pointing into the channel at the source terminal (connected to $V_{DD}$).\n*   **$M_1$** is the **load transistor**. It is an **NMOS** transistor, identified by the arrow pointing out of the channel at the source terminal (connected to ground).\n\n### 2. Transistor Configurations\n*   **$M_2$ (PMOS Driver):** The input signal $V_{in}$ is applied to its gate. Its source is connected to the supply voltage $V_{DD}$, and its drain is connected to the output node $V_{out}$. This is a standard common-source configuration for a PMOS.\n*   **$M_1$ (NMOS Load):** Its gate and source are both connected to ground, meaning $V_{GS1} = 0$. \n    *   If $M_1$ is an **enhancement-mode** NMOS, it would be in cutoff ($V_{GS} < V_{th}$) and act as a very high impedance.\n    *   In many practical textbook circuits of this type, $M_1$ is intended to be a **depletion-mode** NMOS. In this case, with $V_{GS1} = 0$, it is ON and acts as a constant current source load, providing high gain.\n\n### 3. Small-Signal Analysis\nAssuming both transistors are operating in the saturation region:\n*   **Voltage Gain ($A_v$):** The small-signal voltage gain is given by:\n    $$A_v = \\frac{v_{out}}{v_{in}} = -g_{m2} (r_{o1} \\parallel r_{o2})$$\n    where $g_{m2}$ is the transconductance of $M_2$, and $r_{o1}, r_{o2}$ are the output resistances (due to channel-length modulation) of $M_1$ and $M_2$ respectively. The negative sign indicates that the amplifier is **inverting**.\n*   **Input Impedance ($R_{in}$):** Ideally infinite, as the input is connected to the insulated gate of a MOSFET.\n*   **Output Impedance ($R_{out}$):** The output resistance is the parallel combination of the two transistors' output resistances:\n    $$R_{out} = r_{o1} \\parallel r_{o2}$$\n\n### 4. Large-Signal Behavior (Inverter Operation)\nThe circuit also functions as an analog inverter:\n*   When **$V_{in}$ is low** (close to 0V), the PMOS ($M_2$) is strongly turned ON ($|V_{GS2}|$ is large), pulling $V_{out}$ up toward **$V_{DD}$**.\n*   When **$V_{in}$ is high** (close to $V_{DD}$), the PMOS ($M_2$) turns OFF, and the NMOS load ($M_1$) pulls $V_{out}$ down toward **ground**.\n\n### Summary\nThis circuit is a high-gain, inverting amplifier stage. It is commonly used in integrated circuits where a high output swing and high gain are required within a small area, as the active load ($M_1$) takes up much less space than a traditional passive resistor.",
        "format": "markdown",
        "sha256": "f24bbd7d57b3cb9ede2e6fc9e5e738a00c86763ee3b38e57a1baff04c6935072"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS and treats it as an off or depletion-mode current-source load. M1 is a diode-connected PMOS load, so the key gm/gm gain mechanism is missed and the stated gain model is incorrect.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 17209,
        "total_tokens": 18290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 17209,
        "total_tokens": 18290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is an analysis of its components and operation:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Source (CS) Amplifier** with an active load. \n*   **$M_2$** is the **driver transistor**. It is a **PMOS** transistor, identified by the arrow pointing into the channel at the source terminal (connected to $V_{DD}$).\n*   **$M_1$** is the **load transistor**. It is an **NMOS** transistor, identified by the arrow pointing out of the channel at the source terminal (connected to ground).\n\n### 2. Transistor Configurations\n*   **$M_2$ (PMOS Driver):** The input signal $V_{in}$ is applied to its gate. Its source is connected to the supply voltage $V_{DD}$, and its drain is connected to the output node $V_{out}$. This is a standard common-source configuration for a PMOS.\n*   **$M_1$ (NMOS Load):** Its gate and source are both connected to ground, meaning $V_{GS1} = 0$. \n    *   If $M_1$ is an **enhancement-mode** NMOS, it would be in cutoff ($V_{GS} < V_{th}$) and act as a very high impedance.\n    *   In many practical textbook circuits of this type, $M_1$ is intended to be a **depletion-mode** NMOS. In this case, with $V_{GS1} = 0$, it is ON and acts as a constant current source load, providing high gain.\n\n### 3. Small-Signal Analysis\nAssuming both transistors are operating in the saturation region:\n*   **Voltage Gain ($A_v$):** The small-signal voltage gain is given by:\n    $$A_v = \\frac{v_{out}}{v_{in}} = -g_{m2} (r_{o1} \\parallel r_{o2})$$\n    where $g_{m2}$ is the transconductance of $M_2$, and $r_{o1}, r_{o2}$ are the output resistances (due to channel-length modulation) of $M_1$ and $M_2$ respectively. The negative sign indicates that the amplifier is **inverting**.\n*   **Input Impedance ($R_{in}$):** Ideally infinite, as the input is connected to the insulated gate of a MOSFET.\n*   **Output Impedance ($R_{out}$):** The output resistance is the parallel combination of the two transistors' output resistances:\n    $$R_{out} = r_{o1} \\parallel r_{o2}$$\n\n### 4. Large-Signal Behavior (Inverter Operation)\nThe circuit also functions as an analog inverter:\n*   When **$V_{in}$ is low** (close to 0V), the PMOS ($M_2$) is strongly turned ON ($|V_{GS2}|$ is large), pulling $V_{out}$ up toward **$V_{DD}$**.\n*   When **$V_{in}$ is high** (close to $V_{DD}$), the PMOS ($M_2$) turns OFF, and the NMOS load ($M_1$) pulls $V_{out}$ down toward **ground**.\n\n### Summary\nThis circuit is a high-gain, inverting amplifier stage. It is commonly used in integrated circuits where a high output swing and high gain are required within a small area, as the active load ($M_1$) takes up much less space than a traditional passive resistor.",
        "format": "markdown",
        "sha256": "f24bbd7d57b3cb9ede2e6fc9e5e738a00c86763ee3b38e57a1baff04c6935072"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS and treats it as an off or depletion-mode current-source load. M1 is a diode-connected PMOS load, so the key gm/gm gain mechanism is missed and the stated gain model is incorrect.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 17209,
        "total_tokens": 18290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 17209,
        "total_tokens": 18290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is an analysis of its components and operation:\n\n### 1. Component Identification\n*   **$M_2$ (PMOS Transistor):** The arrow on the top terminal (source) points into the transistor, identifying it as a PMOS. Its source is connected to $V_{DD}$, its gate to the input signal $V_{in}$, and its drain to the output node $V_{out}$.\n*   **$M_1$ (PMOS Transistor):** Similarly, the arrow on its top terminal points into the transistor, identifying it as a PMOS. Its source is connected to $V_{out}$, its gate is grounded, and its drain is grounded.\n\n### 2. Circuit Configuration\nThis circuit is a **PMOS common-source amplifier with a diode-connected PMOS load**.\n*   **Driver Transistor ($M_2$):** It operates in a common-source configuration, converting the input voltage $V_{in}$ into a current.\n*   **Load Transistor ($M_1$):** Since its gate and drain are both connected to ground ($V_{G1} = V_{D1} = 0$), it is effectively **diode-connected**. For a PMOS, a diode connection occurs when the gate is tied to the drain. In this state, as long as $V_{out} > |V_{thp1}|$, the transistor is in the saturation region because $V_{SD1} = V_{SG1}$, satisfying the saturation condition $V_{SD} > V_{SG} - |V_{thp}|$.\n\n### 3. Small-Signal Analysis\nTo find the voltage gain ($A_v$), we look at the small-signal model:\n*   The transconductance of the driver is $g_{m2}$.\n*   The output resistance of the driver is $r_{o2}$.\n*   The small-signal resistance of the diode-connected load $M_1$ is approximately $1/g_{m1}$ (neglecting its output resistance $r_{o1}$).\n\nThe voltage gain is given by:\n$$A_v = \\frac{V_{out}}{V_{in}} \\approx -g_{m2} \\cdot \\left( \\frac{1}{g_{m1}} \\parallel r_{o1} \\parallel r_{o2} \\right) \\approx -\\frac{g_{m2}}{g_{m1}}$$\n\nAssuming both transistors have the same process parameters ($\\mu_p, C_{ox}$), the gain can be expressed in terms of their aspect ratios ($W/L$):\n$$A_v \\approx -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n### 4. Summary of Operation\n*   **Function:** It acts as an inverting amplifier.\n*   **Input/Output Relationship:** As $V_{in}$ decreases (becomes more negative relative to $V_{DD}$), $M_2$ turns on harder, pulling $V_{out}$ up towards $V_{DD}$. Conversely, as $V_{in}$ increases towards $V_{DD}$, $M_2$ turns off, and $M_1$ pulls $V_{out}$ down towards ground.\n*   **Linearity:** Diode-connected loads provide better linearity than simple resistor loads but typically offer lower gain than current-source loads.",
        "format": "markdown",
        "sha256": "bb4d13ff16c91ce255a68850695c78f6f279a0580c641434fe40cdf8bebc96e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, and M1 as a diode-connected PMOS load, with the expected gain Av ≈ −gm2/gm1. The pull-down wording is secondary and does not replace the correct load interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 63640,
        "total_tokens": 64721,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 62911,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 63640,
        "total_tokens": 64721,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 62911,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{out}$ of the given circuit, we can perform a small-signal analysis. The circuit consists of two PMOS transistors, $M_1$ and $M_2$, in a cascode configuration.\n\n### 1. Identify the Circuit Configuration\n*   **Transistor $M_2$:** This is the top transistor. Its source is connected to $V_{DD}$ (which is an AC ground) and its gate is connected to a constant bias voltage $V_{b2}$ (also an AC ground).\n*   **Transistor $M_1$:** This is the bottom transistor. Its source is connected to the drain of $M_2$ (node $X$) and its gate is connected to a constant bias voltage $V_{b1}$ (AC ground).\n*   **$R_{out}$:** We are looking into the drain of $M_1$.\n\n### 2. Small-Signal Parameters\nLet's define the small-signal parameters for each transistor:\n*   $g_{m1}, g_{m2}$: Transconductance of $M_1$ and $M_2$.\n*   $g_{mb1}, g_{mb2}$: Body-effect transconductance of $M_1$ and $M_2$.\n*   $r_{o1}, r_{o2}$: Output resistance (channel-length modulation) of $M_1$ and $M_2$.\n\n### 3. Step-by-Step Derivation\n**Step A: Find the resistance looking into node $X$.**\nLooking up from node $X$ into the drain of $M_2$, the source and gate of $M_2$ are both at AC ground. Therefore, the resistance looking into node $X$ is simply the output resistance of $M_2$:\n$$R_X = r_{o2}$$\n\n**Step B: Find the output resistance $R_{out}$ looking into the drain of $M_1$.**\nTransistor $M_1$ acts as a common-gate stage with a source degeneration resistance $R_S = R_X = r_{o2}$. The general formula for the output resistance of a transistor with a source resistance $R_S$ is:\n$$R_{out} = r_{o1} + R_S + (g_{m1} + g_{mb1})r_{o1}R_S$$\n\nSubstituting $R_S = r_{o2}$ into the formula:\n$$R_{out} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1})r_{o1}r_{o2}$$\n\n### 4. Final Expression\nThe exact expression for the output resistance is:\n$$R_{out} = [1 + (g_{m1} + g_{mb1})r_{o1}]r_{o2} + r_{o1}$$\n\nIn most practical applications, the term $(g_{m1} + g_{mb1})r_{o1}r_{o2}$ is much larger than $r_{o1}$ and $r_{o2}$, so it is commonly approximated as:\n$$R_{out} \\approx (g_{m1} + g_{mb1})r_{o1}r_{o2}$$\nIf body effect is neglected ($g_{mb1} \\approx 0$), it simplifies further to:\n$$R_{out} \\approx g_{m1}r_{o1}r_{o2}$$",
        "format": "markdown",
        "sha256": "d154ff506085616ee0bcbd1dc63a19ccf38de640e411672ba405697f99baf2fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M1 as the common-gate cascode, and gives the full output-resistance expression and its approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 2460,
        "total_tokens": 3568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1697,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 2460,
        "total_tokens": 3568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1697,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{out}$ of the given circuit, we can perform a small-signal analysis. The circuit consists of two PMOS transistors, $M_1$ and $M_2$, in a cascode configuration.\n\n### 1. Identify the Circuit Configuration\n*   **Transistor $M_2$:** This is the top transistor. Its source is connected to $V_{DD}$ (which is an AC ground) and its gate is connected to a constant bias voltage $V_{b2}$ (also an AC ground).\n*   **Transistor $M_1$:** This is the bottom transistor. Its source is connected to the drain of $M_2$ (node $X$) and its gate is connected to a constant bias voltage $V_{b1}$ (AC ground).\n*   **$R_{out}$:** We are looking into the drain of $M_1$.\n\n### 2. Small-Signal Parameters\nLet's define the small-signal parameters for each transistor:\n*   $g_{m1}, g_{m2}$: Transconductance of $M_1$ and $M_2$.\n*   $g_{mb1}, g_{mb2}$: Body-effect transconductance of $M_1$ and $M_2$.\n*   $r_{o1}, r_{o2}$: Output resistance (channel-length modulation) of $M_1$ and $M_2$.\n\n### 3. Step-by-Step Derivation\n**Step A: Find the resistance looking into node $X$.**\nLooking up from node $X$ into the drain of $M_2$, the source and gate of $M_2$ are both at AC ground. Therefore, the resistance looking into node $X$ is simply the output resistance of $M_2$:\n$$R_X = r_{o2}$$\n\n**Step B: Find the output resistance $R_{out}$ looking into the drain of $M_1$.**\nTransistor $M_1$ acts as a common-gate stage with a source degeneration resistance $R_S = R_X = r_{o2}$. The general formula for the output resistance of a transistor with a source resistance $R_S$ is:\n$$R_{out} = r_{o1} + R_S + (g_{m1} + g_{mb1})r_{o1}R_S$$\n\nSubstituting $R_S = r_{o2}$ into the formula:\n$$R_{out} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1})r_{o1}r_{o2}$$\n\n### 4. Final Expression\nThe exact expression for the output resistance is:\n$$R_{out} = [1 + (g_{m1} + g_{mb1})r_{o1}]r_{o2} + r_{o1}$$\n\nIn most practical applications, the term $(g_{m1} + g_{mb1})r_{o1}r_{o2}$ is much larger than $r_{o1}$ and $r_{o2}$, so it is commonly approximated as:\n$$R_{out} \\approx (g_{m1} + g_{mb1})r_{o1}r_{o2}$$\nIf body effect is neglected ($g_{mb1} \\approx 0$), it simplifies further to:\n$$R_{out} \\approx g_{m1}r_{o1}r_{o2}$$",
        "format": "markdown",
        "sha256": "d154ff506085616ee0bcbd1dc63a19ccf38de640e411672ba405697f99baf2fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M1 as the common-gate cascode, and gives the full output-resistance expression and its approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 2460,
        "total_tokens": 3568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1697,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 2460,
        "total_tokens": 3568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1697,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{\\text{out}}$ of the given circuit, we can perform a small-signal analysis.\n\n### 1. Circuit Analysis\nThe circuit consists of two PMOS transistors, $M_1$ and $M_2$, in a **cascode configuration**.\n* **$M_2$** is the top transistor. Its source is connected to $V_{DD}$ (AC ground) and its gate is connected to a constant bias voltage $V_{b2}$ (AC ground).\n* **$M_1$** is the bottom transistor. Its source is connected to the drain of $M_2$ (node $X$) and its gate is connected to a constant bias voltage $V_{b1}$ (AC ground).\n* $R_{\\text{out}}$ is the resistance looking into the drain of $M_1$.\n\n### 2. Small-Signal Parameters\nLet's define the small-signal parameters for each transistor:\n* $g_{m1}, g_{m2}$: Transconductance\n* $g_{mb1}, g_{mb2}$: Body-effect transconductance\n* $r_{o1}, r_{o2}$: Output resistance (channel length modulation)\n\n### 3. Step-by-Step Calculation\n**Step A: Find the resistance at node $X$**\nLooking into the drain of $M_2$, since its source and gate are at AC ground, the resistance is simply its own output resistance:\n$$R_X = r_{o2}$$\nThis $R_X$ acts as a source degeneration resistance for transistor $M_1$.\n\n**Step B: Find the total output resistance $R_{\\text{out}}$**\nThe output resistance of a transistor with a source resistance $R_S$ is given by the standard cascode formula:\n$$R_{\\text{out}} = r_{o1} + R_S + (g_{m1} + g_{mb1}) r_{o1} R_S$$\nIn this circuit, the source resistance for $M_1$ is $R_S = R_X = r_{o2}$. Substituting this into the formula:\n$$R_{\\text{out}} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1}) r_{o1} r_{o2}$$\n\n### 4. Final Expression\nThe exact expression for the output resistance is:\n$$R_{\\text{out}} = [1 + (g_{m1} + g_{mb1}) r_{o2}] r_{o1} + r_{o2}$$\nOr, simplified:\n$$R_{\\text{out}} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1}) r_{o1} r_{o2}$$\n\nIn most practical applications where the intrinsic gain $(g_{m1} + g_{mb1})r_{o1} \\gg 1$, this is often approximated as:\n$$R_{\\text{out}} \\approx (g_{m1} + g_{mb1}) r_{o1} r_{o2}$$",
        "format": "markdown",
        "sha256": "026ceeac3e7a5ff6ec7dad6cfd06c3e0c9997c3c17b291b56c81dc26f712cedb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, uses M1 as the cascode device, and gives the correct output-resistance expression and approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 2151,
        "total_tokens": 3259,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1469,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 2151,
        "total_tokens": 3259,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1469,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the PMOS transistor **$M_2$** is in the saturation region, we must satisfy the standard saturation condition for a PMOS device.\n\n### 1. Saturation Condition for PMOS\nFor a PMOS transistor to be in saturation, the source-to-drain voltage ($V_{SD}$) must be greater than or equal to the overdrive voltage ($V_{OV}$):\n$$V_{SD} \\ge V_{SG} - |V_{THP}|$$\nwhere:\n*   $V_{SG}$ is the source-to-gate voltage.\n*   $|V_{THP}|$ is the magnitude of the threshold voltage.\n\n### 2. Applying the Condition to $M_2$\nFrom the circuit diagram, we can identify the terminal voltages for $M_2$:\n*   **Source ($S_2$):** Connected to $V_{DD}$, so $V_{S2} = V_{DD}$.\n*   **Gate ($G_2$):** Connected to $V_{b2}$, so $V_{G2} = V_{b2}$.\n*   **Drain ($D_2$):** Connected to node $X$, so $V_{D2} = V_X$.\n\nSubstituting these into the saturation inequality:\n$$(V_{DD} - V_X) \\ge (V_{DD} - V_{b2}) - |V_{THP2}|$$\n\nSimplifying the expression by removing $V_{DD}$ from both sides:\n$$-V_X \\ge -V_{b2} - |V_{THP2}|$$\n$$V_X \\le V_{b2} + |V_{THP2}|$$\n\n### 3. Relating to $M_1$ and $V_{b1}$\nThe voltage at node $X$ is determined by the gate-source voltage of $M_1$. Since $X$ is the source of $M_1$:\n$$V_X = V_{b1} + V_{SG1}$$\nWe know that $V_{SG1} = |V_{THP1}| + V_{OV1}$. Substituting this into the inequality:\n$$V_{b1} + |V_{THP1}| + V_{OV1} \\le V_{b2} + |V_{THP2}|$$\n\n### 4. Final Condition\nAssuming the threshold voltages of both transistors are approximately equal ($|V_{THP1}| \\approx |V_{THP2}|$), the condition simplifies to:\n$$V_{b2} \\ge V_{b1} + V_{OV1}$$\n\n**Summary:**\nTo ensure $M_2$ is in saturation, the bias voltage **$V_{b2}$ must be higher than $V_{b1}$** by at least the overdrive voltage of $M_1$. This keeps the potential at node $X$ low enough so that $M_2$ has sufficient source-drain voltage to remain in saturation.",
        "format": "markdown",
        "sha256": "3605b241dac711a36aefb921d6da39c89f2c0ff3e1c2c1979f202ed4a2b966d7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, gives M2’s saturation condition, relates VX to Vb1 through M1, and derives the equivalent condition Vb2 − Vb1 ≥ M1’s overdrive for equal thresholds.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3989,
        "total_tokens": 5105,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3343,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3989,
        "total_tokens": 5105,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3343,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that transistor **$M_2$** is in the **saturation region**, we must satisfy the fundamental condition for a PMOS transistor.\n\n### 1. Identify the Transistor Type\nThe transistors in the figure are **PMOS** transistors. We can tell because the arrows on the source terminals (at $V_{DD}$ and node $X$) point **into** the transistors.\n\n### 2. Saturation Condition for PMOS\nFor a PMOS transistor to be in saturation, the source-to-drain voltage ($V_{SD}$) must be greater than or equal to the overdrive voltage ($V_{OV} = V_{SG} - |V_{THP}|$).\nThe condition is:\n$$V_{SD} \\ge V_{SG} - |V_{THP}|$$\nAlternatively, this can be written in terms of the drain voltage ($V_D$) and gate voltage ($V_G$):\n$$V_D \\le V_G + |V_{THP}|$$\n\n### 3. Apply the Condition to $M_2$\nFor transistor $M_2$:\n*   **Source voltage ($V_{S2}$):** $V_{DD}$\n*   **Gate voltage ($V_{G2}$):** $V_{b2}$\n*   **Drain voltage ($V_{D2}$):** $V_X$\n\nSubstituting these into the saturation condition:\n$$V_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{THP2}|$$\nSimplifying this inequality, we get:\n$$-V_X \\ge -V_{b2} - |V_{THP2}|$$\n$$V_X \\le V_{b2} + |V_{THP2}|$$\n\n### 4. Relate $V_X$ to the Bias Voltages\nThe voltage at node $X$ is determined by the source of $M_1$. Assuming $M_1$ is also in saturation, its source-to-gate voltage is $V_{SG1} = |V_{THP1}| + V_{OV1}$. Therefore:\n$$V_X = V_{b1} + V_{SG1} = V_{b1} + |V_{THP1}| + V_{OV1}$$\n\nSubstituting this expression for $V_X$ back into the saturation condition for $M_2$:\n$$V_{b1} + |V_{THP1}| + V_{OV1} \\le V_{b2} + |V_{THP2}|$$\n\n### Summary\nTo ensure $M_2$ is in saturation, you must choose the bias voltages such that:\n1.  **$V_{b2}$ is high enough:** Assuming the threshold voltages are approximately equal ($|V_{THP1}| \\approx |V_{THP2}|$), the condition simplifies to:\n    $$V_{b2} \\ge V_{b1} + V_{OV1}$$\n    This ensures the drain of $M_2$ (node $X$) does not rise too high, which would push it into the triode region.\n2.  **$M_2$ remains ON:** $V_{b2}$ must still be low enough to keep the transistor turned on:\n    $$V_{b2} < V_{DD} - |V_{THP2}|$$",
        "format": "markdown",
        "sha256": "a577802b2ad5673838a54b107049c15a86cbc956660c01dcf02cc14467794532"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and relates VX to Vb1 to derive the equivalent bias condition. The equal-threshold simplification is also correct.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 5227,
        "total_tokens": 6343,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4492,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 5227,
        "total_tokens": 6343,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4492,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the PMOS transistor $M_2$ is in the saturation region, we must satisfy the standard saturation condition for a PMOS device.\n\n### 1. Saturation Condition for PMOS\nA PMOS transistor is in saturation when its source-to-drain voltage ($V_{SD}$) is greater than or equal to its overdrive voltage ($V_{OV} = V_{SG} - |V_{THP}|$).\n$$V_{SD} \\ge V_{SG} - |V_{THP}|$$\n\n### 2. Applying the Condition to $M_2$\nLooking at the figure:\n*   **Source voltage of $M_2$ ($V_{S2}$):** $V_{DD}$\n*   **Gate voltage of $M_2$ ($V_{G2}$):** $V_{b2}$\n*   **Drain voltage of $M_2$ ($V_{D2}$):** $V_X$\n\nSubstituting these into the saturation inequality:\n$$(V_{DD} - V_X) \\ge (V_{DD} - V_{b2}) - |V_{THP2}|$$\n\nSimplifying this expression:\n$$-V_X \\ge -V_{b2} - |V_{THP2}|$$\n$$V_X \\le V_{b2} + |V_{THP2}|$$\n\n### 3. Relating to $M_1$\nNode $X$ is also the source of transistor $M_1$. If $M_1$ is in saturation, its source voltage $V_X$ is determined by its gate bias $V_{b1}$ and its source-to-gate voltage $V_{SG1}$:\n$$V_X = V_{b1} + V_{SG1} = V_{b1} + |V_{THP1}| + V_{OV1}$$\n\nSubstituting this value of $V_X$ back into our condition for $M_2$:\n$$V_{b1} + |V_{THP1}| + V_{OV1} \\le V_{b2} + |V_{THP2}|$$\n\n### 4. Final Design Constraint\nAssuming the threshold voltages of both transistors are approximately equal ($|V_{THP1}| \\approx |V_{THP2}|$), the condition simplifies to:\n$$V_{b2} \\ge V_{b1} + V_{OV1}$$\n\n**In summary, to ensure $M_2$ stays in saturation:**\n*   The bias voltage **$V_{b2}$ must be sufficiently higher than $V_{b1}$** (specifically by at least the overdrive voltage of $M_1$).\n*   This ensures that node $X$ stays low enough to provide $M_2$ with enough \"headroom\" ($V_{SD2}$) to remain in saturation. If $V_{b2}$ is too low, node $X$ will rise, pushing $M_2$ into the triode (linear) region.",
        "format": "markdown",
        "sha256": "c182b050aa9270d0bfa2ab5625619998de129c112e3cfbcfcaf0ec63f5c2dbb5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, and relates VX to Vb1 to derive the equivalent condition Vb2 ≥ Vb1 + VOV1 for equal thresholds.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2604,
        "total_tokens": 3720,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 2604,
        "total_tokens": 3720,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, the circuit is a **cascode amplifier** with an active current source load. Here is a detailed analysis of its components, operation, and characteristics.\n\n### 1. Circuit Topology\n*   **Transistor $M_1$:** This is the input transistor, configured as a **Common-Source (CS)** stage. The input signal $v_{in}$ is applied to its gate.\n*   **Transistor $M_2$:** This is the cascode transistor, configured as a **Common-Gate (CG)** stage. Its gate is connected to a constant bias voltage $V_{b1}$, and its source is connected to the drain of $M_1$ (node $X$).\n*   **Current Source $I_1$:** This acts as an **active load**. In a practical integrated circuit, this would typically be implemented using a PMOS current mirror. It provides a high small-signal resistance, which helps achieve high voltage gain.\n*   **Output $v_{out}$:** The output signal is taken from the drain of $M_2$.\n\n### 2. Small-Signal Analysis\nTo understand the performance, we look at the small-signal parameters: $g_m$ (transconductance) and $r_o$ (output resistance) for both transistors.\n\n#### **Voltage Gain ($A_v$)**\nThe overall voltage gain is the product of the transconductance of the input stage and the total output resistance at the output node.\n$$A_v = \\frac{v_{out}}{v_{in}} \\approx -g_{m1} \\cdot R_{out}$$\nWhere $R_{out}$ is the resistance looking into the drain of $M_2$.\n\n#### **Output Resistance ($R_{out}$)**\nThe cascode configuration significantly boosts the output resistance. The resistance looking into the drain of $M_2$ is given by:\n$$R_{out} \\approx (g_{m2} + g_{mb2}) \\cdot r_{o2} \\cdot r_{o1}$$\n(Assuming the ideal current source $I_1$ has infinite resistance. In reality, it would be in parallel with the resistance of the PMOS load).\nThis value is much higher than the output resistance of a single-transistor CS stage ($r_{o1}$), leading to a much higher voltage gain.\n\n### 3. Key Advantages\n*   **High Voltage Gain:** Because $R_{out}$ is increased by a factor of approximately $(g_{m2} \\cdot r_{o2})$, the gain is significantly higher than a standard common-source amplifier.\n*   **Reduced Miller Effect:** In a standard CS amplifier, the gate-drain capacitance ($C_{gd}$) is multiplied by the gain (Miller effect), which limits high-frequency performance. In a cascode, the voltage gain from $v_{in}$ to node $X$ is very small (approximately $-g_{m1} / g_{m2} \\approx -1$). This \"shields\" the input from the large voltage swings at the output, greatly improving the bandwidth.\n*   **High Input-Output Isolation:** The cascode transistor $M_2$ acts as a buffer, reducing the feedback from the output to the input.\n\n### 4. Limitations\n*   **Reduced Output Swing:** Both $M_1$ and $M_2$ must remain in the saturation region for the amplifier to work correctly. This requires a minimum output voltage:\n    $$v_{out,min} = V_{OV1} + V_{OV2}$$\n    where $V_{OV}$ is the overdrive voltage ($V_{GS} - V_{TH}$). This \"consumes\" more voltage headroom compared to a single-transistor stage, limiting the maximum signal swing.\n*   **Supply Voltage:** It requires a high enough $V_{DD}$ to accommodate the stacked transistors and the current source.\n\n### Summary\nThis circuit is a high-performance building block in analog IC design, favored for its **high gain** and **excellent frequency response** (wide bandwidth) at the cost of some output voltage headroom.",
        "format": "markdown",
        "sha256": "af7a5fd593ced46b235198cd459fc0240b691944ba37ba320a72931761ec526b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the common-source input and common-gate cascode and gives the accepted ideal-load gain and boosted output-resistance expression. Its node-X/Miller estimate is inaccurate for an ideal current-source load, but the essential topology and gain meet the golden full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 1920,
        "total_tokens": 3001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 1920,
        "total_tokens": 3001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **cascode amplifier** with an active current source load. It consists of two NMOS transistors, $M_1$ and $M_2$, stacked vertically.\n\nHere is a detailed analysis of the circuit:\n\n### 1. Circuit Topology\n*   **$M_1$ (Common-Source Stage):** The input signal $v_{in}$ is applied to the gate of $M_1$. Its source is grounded, making it a common-source (CS) amplifier stage. It converts the input voltage into a signal current.\n*   **$M_2$ (Common-Gate Stage):** The gate of $M_2$ is connected to a constant bias voltage $V_{b1}$. The signal current from $M_1$ enters the source of $M_2$ (node $X$). This makes $M_2$ a common-gate (CG) stage, also known as the \"cascode\" transistor.\n*   **$I_1$ (Active Load):** The current source $I_1$ at the top acts as a high-impedance load for the amplifier, which helps in achieving a very high voltage gain.\n\n### 2. Small-Signal Analysis\nLet $g_{m1}, r_{o1}$ be the parameters for $M_1$ and $g_{m2}, r_{o2}$ be the parameters for $M_2$.\n\n*   **Output Resistance ($R_{out}$):**\n    The output resistance looking into the drain of $M_2$ is significantly boosted by the cascode configuration. It is approximately:\n    $$R_{out} \\approx (g_{m2} \\cdot r_{o2}) \\cdot r_{o1}$$\n    (More accurately: $R_{out} = r_{o2} + r_{o1} + (g_{m2} + g_{mb2})r_{o2}r_{o1}$, where $g_{mb2}$ accounts for the body effect).\n    This is much higher than the output resistance of a single-transistor CS stage ($r_{o1}$).\n\n*   **Voltage Gain ($A_v$):**\n    The overall voltage gain is the product of the transconductance of the input stage and the total output resistance:\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx -g_{m1} \\cdot (R_{out} \\parallel R_{I1})$$\n    where $R_{I1}$ is the internal resistance of the current source $I_1$. If $I_1$ is an ideal current source ($R_{I1} = \\infty$), the gain is extremely high:\n    $$A_v \\approx -g_{m1} \\cdot g_{m2} \\cdot r_{o2} \\cdot r_{o1}$$\n\n### 3. Key Advantages\n*   **High Gain:** By increasing the output impedance, the cascode stage provides a much higher voltage gain than a simple common-source amplifier.\n*   **Reduced Miller Effect:** In a standard CS amplifier, the gate-drain capacitance ($C_{gd}$) is multiplied by the gain (Miller effect), which limits high-frequency performance. In a cascode, the voltage gain at node $X$ is very small (approx. $-g_{m1}/g_{m2} \\approx -1$), which significantly reduces the effective input capacitance and extends the bandwidth.\n*   **High Input-Output Isolation:** The cascode transistor $M_2$ acts as a shield, reducing the feedback from the output to the input.\n\n### 4. Design Trade-offs\n*   **Voltage Headroom:** The main disadvantage is that it requires more \"headroom\" (voltage supply). For both transistors to remain in the saturation region, the output voltage $v_{out}$ must be high enough to accommodate the overdrive voltages of both $M_1$ and $M_2$. Specifically, $V_{out} > V_{ov1} + V_{ov2}$.\n*   **Biasing:** It requires an additional stable bias voltage $V_{b1}$ for the gate of $M_2$.\n\n### Summary\nThis circuit is a high-performance building block in analog integrated circuits, commonly used when high gain and wide bandwidth are required, such as in the input stages of operational amplifiers.",
        "format": "markdown",
        "sha256": "84f163a66e3fc2790c3f893ba2c5442316bcba9f635219ed87b76c3388b33e64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. The node-X swing claim is imprecise for an ideal current-source load, but the golden solution’s full-credit rule applies.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2195,
        "total_tokens": 3276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1255,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2195,
        "total_tokens": 3276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1255,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **cascode amplifier** with an active current source load. It consists of two NMOS transistors, $M_1$ and $M_2$, stacked vertically.\n\nHere is a detailed analysis of the circuit:\n\n### 1. Circuit Topology\n*   **$M_1$ (Common-Source Stage):** The input signal $v_{in}$ is applied to the gate of $M_1$. Its source is grounded, making it a common-source (CS) amplifier stage. It converts the input voltage into a signal current.\n*   **$M_2$ (Common-Gate Stage):** The gate of $M_2$ is connected to a constant bias voltage $V_{b1}$. The signal current from $M_1$ enters the source of $M_2$ (node $X$). This makes $M_2$ a common-gate (CG) stage, also known as the \"cascode\" transistor.\n*   **$I_1$ (Active Load):** The current source $I_1$ at the top acts as a high-impedance load for the amplifier, which helps in achieving a very high voltage gain.\n\n### 2. Small-Signal Analysis\nLet $g_{m1}, r_{o1}$ be the parameters for $M_1$ and $g_{m2}, r_{o2}$ be the parameters for $M_2$.\n\n*   **Output Resistance ($R_{out}$):**\n    The output resistance looking into the drain of $M_2$ is significantly boosted by the cascode configuration. It is approximately:\n    $$R_{out} \\approx (g_{m2} \\cdot r_{o2}) \\cdot r_{o1}$$\n    (More accurately: $R_{out} = r_{o2} + r_{o1} + (g_{m2} + g_{mb2})r_{o2}r_{o1}$, where $g_{mb2}$ accounts for the body effect).\n    This is much higher than the output resistance of a single-transistor CS stage ($r_{o1}$).\n\n*   **Voltage Gain ($A_v$):**\n    The overall voltage gain is the product of the transconductance of the input stage and the total output resistance:\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx -g_{m1} \\cdot (R_{out} \\parallel R_{I1})$$\n    where $R_{I1}$ is the internal resistance of the current source $I_1$. If $I_1$ is an ideal current source ($R_{I1} = \\infty$), the gain is extremely high:\n    $$A_v \\approx -g_{m1} \\cdot g_{m2} \\cdot r_{o2} \\cdot r_{o1}$$\n\n### 3. Key Advantages\n*   **High Gain:** By increasing the output impedance, the cascode stage provides a much higher voltage gain than a simple common-source amplifier.\n*   **Reduced Miller Effect:** In a standard CS amplifier, the gate-drain capacitance ($C_{gd}$) is multiplied by the gain (Miller effect), which limits high-frequency performance. In a cascode, the voltage gain at node $X$ is very small (approx. $-g_{m1}/g_{m2} \\approx -1$), which significantly reduces the effective input capacitance and extends the bandwidth.\n*   **High Input-Output Isolation:** The cascode transistor $M_2$ acts as a shield, reducing the feedback from the output to the input.\n\n### 4. Design Trade-offs\n*   **Voltage Headroom:** The main disadvantage is that it requires more \"headroom\" (voltage supply). For both transistors to remain in the saturation region, the output voltage $v_{out}$ must be high enough to accommodate the overdrive voltages of both $M_1$ and $M_2$. Specifically, $V_{out} > V_{ov1} + V_{ov2}$.\n*   **Biasing:** It requires an additional stable bias voltage $V_{b1}$ for the gate of $M_2$.\n\n### Summary\nThis circuit is a high-performance building block in analog integrated circuits, commonly used when high gain and wide bandwidth are required, such as in the input stages of operational amplifiers.",
        "format": "markdown",
        "sha256": "84f163a66e3fc2790c3f893ba2c5442316bcba9f635219ed87b76c3388b33e64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. The node-X swing claim is imprecise for an ideal current-source load, but the golden solution’s full-credit rule applies.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2195,
        "total_tokens": 3276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1255,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1081,
        "output_tokens": 2195,
        "total_tokens": 3276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1255,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown in the figure is a **cascode structure**.\n\nSpecifically, it is a **MOS cascode amplifier** consisting of two NMOS transistors:\n\n1.  **Input Stage ($M_1$):** Transistor $M_1$ is in a **common-source** configuration. The input signal $V_{in}$ is applied to its gate, and its source is connected to ground. It acts as a transconductance stage, converting the input voltage into a current.\n2.  **Cascode Stage ($M_2$):** Transistor $M_2$ is in a **common-gate** configuration. Its gate is connected to a constant bias voltage $V_{b1}$, and its source is connected to the drain of $M_1$. It acts as a current buffer, passing the current from $M_1$ to the output load ($R_D$) while providing high output impedance.\n\n**Key characteristics of this cascode structure include:**\n*   **High Output Impedance:** The cascode transistor $M_2$ significantly increases the output resistance of the circuit compared to a simple common-source amplifier.\n*   **Reduced Miller Effect:** Because the drain of $M_1$ is held at a relatively constant potential by the source of $M_2$, the Miller capacitance at the input is greatly reduced, allowing for a higher bandwidth.\n*   **Increased Gain:** The higher output impedance leads to a higher overall voltage gain ($A_v \\approx -g_{m1} \\cdot R_{out}$).",
        "format": "markdown",
        "sha256": "face7057b8c3b01d381ba15dfbd3f999b743d21b071ce10b45f6b5f9e812de3c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Incorrectly calls the circuit a cascode and misidentifies M1 as an NMOS common-source device; M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 6386,
        "total_tokens": 7500,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6059,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 6386,
        "total_tokens": 7500,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6059,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown in the figure is a **cascode structure**.\n\nSpecifically, it is a **telescopic cascode amplifier**. Here is a breakdown of its components and how it works:\n\n1.  **Input Stage ($M_1$):** The bottom transistor, $M_1$, is in a **common-source (CS)** configuration. The input signal $V_{in}$ is applied to its gate, and its source is connected to ground. It converts the input voltage into a current.\n2.  **Cascode Stage ($M_2$):** The top transistor, $M_2$, is in a **common-gate (CG)** configuration. Its gate is held at a constant DC bias voltage ($V_{b1}$), and the signal current from $M_1$ enters through its source.\n3.  **Output:** The output signal $V_{out}$ is taken from the drain of $M_2$, which is connected to the supply voltage $V_{DD}$ through a load resistor $R_D$.\n\n### Why use a cascode structure?\nThe cascode configuration is widely used in analog circuit design because it offers several advantages over a simple single-transistor amplifier:\n*   **Higher Output Impedance:** It significantly increases the output resistance, which leads to much higher voltage gain.\n*   **Reduced Miller Effect:** By keeping the drain voltage of $M_1$ relatively constant, it minimizes the Miller capacitance, greatly improving the amplifier's high-frequency bandwidth.\n*   **Better Isolation:** It provides better input-output isolation.\n\n*Note: While $M_2$ is drawn with an arrow pointing into the transistor (a symbol often used for a PMOS), in the context of a standard telescopic cascode like this, it is typically intended to be an NMOS transistor. If it were a PMOS, the circuit would require a different biasing scheme (like a folded cascode) to function properly. Regardless of the specific transistor type, the **topology** (a common-source stage followed by a common-gate stage) is the defining characteristic of a cascode.*",
        "format": "markdown",
        "sha256": "aa9afb473dccccad3b3b150c4f7b584b5ee1e610c0fb4d5739870c381ef34e0f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a common-source device; M1 is a PMOS source follower, so the circuit lacks cascode output-resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 8590,
        "total_tokens": 9704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8144,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 8590,
        "total_tokens": 9704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8144,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown in the figure is a **cascode structure**.\n\nSpecifically, it is a **telescopic cascode amplifier**. Here is a breakdown of its components and how it works:\n\n1.  **Input Stage ($M_1$):** The bottom transistor, $M_1$, is in a **common-source (CS)** configuration. The input signal $V_{in}$ is applied to its gate, and its source is connected to ground. It converts the input voltage into a current.\n2.  **Cascode Stage ($M_2$):** The top transistor, $M_2$, is in a **common-gate (CG)** configuration. Its gate is held at a constant DC bias voltage ($V_{b1}$), and the signal current from $M_1$ enters through its source.\n3.  **Output:** The output signal $V_{out}$ is taken from the drain of $M_2$, which is connected to the supply voltage $V_{DD}$ through a load resistor $R_D$.\n\n### Why use a cascode structure?\nThe cascode configuration is widely used in analog circuit design because it offers several advantages over a simple single-transistor amplifier:\n*   **Higher Output Impedance:** It significantly increases the output resistance, which leads to much higher voltage gain.\n*   **Reduced Miller Effect:** By keeping the drain voltage of $M_1$ relatively constant, it minimizes the Miller capacitance, greatly improving the amplifier's high-frequency bandwidth.\n*   **Better Isolation:** It provides better input-output isolation.\n\n*Note: While $M_2$ is drawn with an arrow pointing into the transistor (a symbol often used for a PMOS), in the context of a standard telescopic cascode like this, it is typically intended to be an NMOS transistor. If it were a PMOS, the circuit would require a different biasing scheme (like a folded cascode) to function properly. Regardless of the specific transistor type, the **topology** (a common-source stage followed by a common-gate stage) is the defining characteristic of a cascode.*",
        "format": "markdown",
        "sha256": "aa9afb473dccccad3b3b150c4f7b584b5ee1e610c0fb4d5739870c381ef34e0f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a common-source device; M1 is a PMOS source follower, so the circuit lacks cascode output-resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 8590,
        "total_tokens": 9704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8144,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 8590,
        "total_tokens": 9704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8144,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the Miller effect is less pronounced in a cascode amplifier, we first need to define the Miller effect and then look at how the cascode architecture physically bypasses its consequences.\n\n---\n\n### 1. The Problem: The Miller Effect\nIn a standard **Common-Source (CS)** amplifier, there is a parasitic capacitance ($C_{gd}$) between the input (Gate) and the output (Drain). \n\nBecause the amplifier is inverting and has a high voltage gain ($A_v$), the voltage across this capacitor changes much more than the input voltage alone. Specifically, the effective input capacitance ($C_{in}$) is \"magnified\" by the gain:\n$$C_{in(Miller)} = C_{gd} \\times (1 + |A_v|)$$\nIf the gain is 100, the input sees a capacitance 101 times larger than $C_{gd}$. This creates a low-pass filter at the input, severely limiting the high-frequency response (bandwidth).\n\n---\n\n### 2. The Solution: The Cascode Configuration\nA cascode amplifier consists of two transistors stacked on top of each other:\n1.  **The Input Stage ($Q_1$):** A Common-Source (CS) transistor.\n2.  **The Output Stage ($Q_2$):** A Common-Gate (CG) transistor.\n\nThe input signal enters the gate of $Q_1$. The output of $Q_1$ (its drain) is connected directly to the source of $Q_2$. The output of the whole circuit is taken from the drain of $Q_2$.\n\n---\n\n### 3. Why the Miller Effect is Reduced\nThe Miller effect depends entirely on the **voltage gain across the feedback capacitor**. In the cascode, the feedback capacitor in question is $C_{gd1}$ (the gate-to-drain capacitance of the input transistor $Q_1$).\n\nHere is the step-by-step reason why the effect is minimized:\n\n#### A. Low Input Impedance of the Second Stage\nThe load seen by the drain of $Q_1$ is the **source** of $Q_2$. The input impedance of a Common-Gate stage is very low, approximately:\n$$R_{in(Q2)} \\approx \\frac{1}{g_{m2}}$$\n(where $g_m$ is the transconductance).\n\n#### B. Negligible Voltage Gain at the Input Transistor\nThe voltage gain of the first stage ($A_{v1}$) is the product of its transconductance and its load resistance:\n$$A_{v1} = -g_{m1} \\times R_{load1} \\approx -g_{m1} \\times \\frac{1}{g_{m2}}$$\nIf the two transistors are identical ($g_{m1} = g_{m2}$), the voltage gain of the first stage is roughly **$-1$**.\n\n#### C. The Miller Calculation\nNow, apply the Miller formula to $Q_1$:\n$$C_{in(Miller)} = C_{gd1} \\times (1 + |-1|) = 2 \\times C_{gd1}$$\nIn a standard CS amplifier, the gain might be 50 or 100, making the Miller capacitance $51C_{gd}$ or $101C_{gd}$. In a cascode, the gain across that specific capacitor is held near unity, so the capacitance is only doubled.\n\n---\n\n### 4. Where does the gain go?\nYou might wonder: *\"If the first stage has no gain, how does the cascode amplify?\"*\n\nThe **voltage gain** happens at the second transistor ($Q_2$). Because $Q_2$ is a Common-Gate stage, its **Gate is grounded** (AC ground). Therefore, there is no feedback path from the output (Drain of $Q_2$) back to the input (Source of $Q_2$) through a Miller capacitor. The gate acts as a shield, physically and electrically isolating the output from the input.\n\n### Summary\nThe Miller effect is less pronounced in a cascode because the **Common-Gate stage acts as a low-impedance load** for the input stage. This \"clamps\" the voltage swings at the drain of the input transistor, keeping the voltage gain across the input parasitic capacitance very low (near unity) and preventing the capacitance from being magnified.",
        "format": "markdown",
        "sha256": "a8c64d945de7b4a3ee2cc4afe0ab2880959787bda74edbd3cc82383622bba006"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and derives a gain of roughly −1 across Cgd1, giving about 2Cgd1 rather than gain-multiplied capacitance. Calling the gain “negligible” is imprecise, but the answer’s calculation and conclusion are correct.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 1612,
        "total_tokens": 1625,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 674,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 1612,
        "total_tokens": 1625,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 674,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the Miller effect is less pronounced in a cascode amplifier, we first need to define the Miller effect and then look at how the cascode architecture bypasses its consequences.\n\n---\n\n### 1. The Problem: The Miller Effect\nIn a standard **Common Emitter (CE)** or **Common Source (CS)** amplifier, there is a parasitic capacitance ($C_{bc}$ or $C_{gd}$) between the input (Base/Gate) and the output (Collector/Drain).\n\nBecause the amplifier has a high negative voltage gain ($-A_v$), the voltage across this capacitor changes much more than the input voltage alone. Specifically, the effective input capacitance ($C_{in}$) is multiplied by the gain:\n$$C_{in(Miller)} = C_{bc} \\times (1 - A_v)$$\nIf the gain is $-100$, the small parasitic capacitance is effectively **101 times larger** at the input. This creates a low-pass filter with the input source resistance, severely limiting the high-frequency bandwidth.\n\n---\n\n### 2. The Solution: The Cascode Configuration\nA cascode consists of two transistors stacked on top of each other:\n1.  **The Input Stage:** A Common Emitter (or Common Source) transistor.\n2.  **The Output Stage:** A Common Base (or Common Gate) transistor.\n\nThe input signal enters the base of $Q_1$, and the output is taken from the collector of $Q_2$.\n\n---\n\n### 3. Why the Miller Effect is Reduced\nThe Miller effect depends entirely on the **voltage gain of the first transistor ($Q_1$)**. In a cascode, this gain is intentionally kept very low.\n\n#### A. Low Input Impedance of the Second Stage\nThe collector of $Q_1$ is connected to the emitter of $Q_2$. In a Common Base configuration, the input impedance looking into the emitter of $Q_2$ is very low:\n$$Z_{in(Q2)} \\approx \\frac{1}{g_m}$$\nwhere $g_m$ is the transconductance.\n\n#### B. The Gain of the First Stage\nThe voltage gain of the first stage ($A_{v1}$) is determined by the transconductance of $Q_1$ multiplied by the load it sees at its collector. In this case, the load is the low input impedance of $Q_2$:\n$$A_{v1} = -g_{m1} \\times Z_{in(Q2)} \\approx -g_{m1} \\times \\frac{1}{g_{m2}}$$\nIf both transistors are biased similarly, $g_{m1} \\approx g_{m2}$, meaning the voltage gain of the first stage is **approximately -1**.\n\n#### C. The Miller Calculation\nNow, let's apply the Miller formula to the first stage:\n$$C_{in(Miller)} = C_{bc} \\times (1 - (-1)) = 2 \\times C_{bc}$$\nInstead of the capacitance being multiplied by 100 or 200, it is only multiplied by **2**. This drastically reduces the total input capacitance, allowing the amplifier to operate at much higher frequencies.\n\n---\n\n### 4. Where does the gain go?\nYou might wonder: *If the first stage has no gain, how does the cascode amplify?*\n\nThe gain is shifted to the **second stage ($Q_2$)**. \n*   $Q_2$ is a Common Base amplifier. \n*   In a Common Base amplifier, the Base is at AC ground. \n*   Since the Base is grounded, there is no feedback path from the output (Collector) to the input (Emitter) through a Miller capacitor. \n*   Therefore, $Q_2$ provides the high voltage gain of the overall circuit without suffering from the Miller effect.\n\n### Summary\nThe Miller effect is less pronounced in a cascode because the **first stage sees a very low load impedance** (the emitter of the second stage). This keeps the voltage swing at the first stage's output very small, preventing the \"multiplication\" of the feedback capacitance. The high voltage gain is then handled by the second stage, which is immune to the Miller effect because its control terminal (Base/Gate) is grounded.",
        "format": "markdown",
        "sha256": "83cc53b81e7a93b4ff41bc2052f3d04315782014bb598247eaea8ed986892bd7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low impedance node at the first transistor’s drain/emitter of the common-gate device, derives a gain near −1, and gives the resulting Miller factor of about 2 rather than the full-stage gain. The secondary claim that the second stage is immune to Miller effect is somewhat broad but does not undermine the essential explanation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 1558,
        "total_tokens": 1571,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 1558,
        "total_tokens": 1571,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the Miller effect is less pronounced in a cascode amplifier, we must first look at what causes the Miller effect and then see how the cascode architecture \"neutralizes\" those conditions.\n\n### 1. The Miller Effect Refresher\nIn a standard **Common-Source (CS)** amplifier, there is a parasitic capacitance ($C_{gd}$) between the input (gate) and the output (drain). Because the amplifier is inverting and has a high voltage gain ($A_v$), the effective input capacitance is \"magnified\":\n\n$$C_{in(Miller)} = C_{gd} \\times (1 + |A_v|)$$\n\nIf the gain is 100, the input capacitance is roughly 101 times larger than the physical parasitic capacitance. This creates a low-pass filter with the source resistance, severely limiting high-frequency bandwidth.\n\n---\n\n### 2. The Cascode Solution\nA cascode amplifier consists of two transistors:\n1.  **The Input Stage ($Q_1$):** A Common-Source (CS) transistor.\n2.  **The Output Stage ($Q_2$):** A Common-Gate (CG) transistor stacked directly on top of $Q_1$.\n\nThe \"magic\" happens at the node between the two transistors (the drain of $Q_1$ and the source of $Q_2$).\n\n#### A. Low Input Impedance of the CG Stage\nThe Miller effect on the input transistor ($Q_1$) depends on the voltage gain from its gate to its **own drain**. \n\nIn a cascode, the load seen by the drain of $Q_1$ is the **input impedance of the Common-Gate stage ($Q_2$)**. The input impedance of a CG stage is very low, approximately:\n$$R_{in(Q2)} \\approx \\frac{1}{g_{m2}}$$\n\n#### B. The \"Clamped\" Voltage Gain\nThe voltage gain of the first stage ($A_{v1}$) is the transconductance of $Q_1$ multiplied by the load it sees:\n$$A_{v1} = -g_{m1} \\times R_{in(Q2)} \\approx -g_{m1} \\times \\frac{1}{g_{m2}}$$\n\nIf the two transistors are identical ($g_{m1} = g_{m2}$), the voltage gain of the first stage is **approximately -1**.\n\n#### C. Applying the Miller Formula\nNow, let's plug that gain back into the Miller equation for $Q_1$:\n$$C_{in(Miller)} = C_{gd1} \\times (1 + |-1|) = 2 \\times C_{gd1}$$\n\nInstead of being multiplied by 50 or 100 (as in a single-stage CS amplifier), the parasitic capacitance is only multiplied by **2**. This drastically reduces the total input capacitance, allowing the circuit to operate at much higher frequencies.\n\n---\n\n### 3. Why doesn't the second transistor have a Miller effect?\nYou might wonder if the Miller effect simply moves to the second transistor ($Q_2$). It does not, for two reasons:\n1.  **The Gate is Grounded:** In a Common-Gate configuration, the gate is connected to a DC bias (AC ground). Therefore, the capacitance between the drain and gate ($C_{gd2}$) is connected to ground, not back to the input signal. It acts as a simple shunt capacitance to ground rather than a feedback (Miller) capacitance.\n2.  **Isolation:** There is no feedback path from the final output (drain of $Q_2$) back to the original input (gate of $Q_1$).\n\n### Summary\nThe Miller effect is less pronounced in a cascode because the **Common-Gate stage acts as a current buffer**. It provides a very low input impedance to the first transistor, which \"clamps\" the voltage swing at the first transistor's drain. Since there is very little voltage gain at the node where the feedback capacitor ($C_{gd1}$) exists, the Miller multiplication cannot occur. \n\nThe high voltage gain of the overall circuit is still achieved at the final output, but it is \"shielded\" from the input by the Common-Gate transistor.",
        "format": "markdown",
        "sha256": "05ee6801f9f8a1ab6f3f9d604e315597b84ed5aa66f52cb529e47c37c11b016f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and derives a gate-to-drain gain near −1, so Cgd1 is multiplied by about 2 rather than by the full stage gain. The effect is reduced, not eliminated, as the answer’s calculation shows.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 1592,
        "total_tokens": 1605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 687,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 1592,
        "total_tokens": 1605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 687,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Topology\nThe circuit is a **Common-Gate (CG) Amplifier** with an active load.\n*   **$M_2$ (NMOS):** This is the main amplifying transistor. It is in a common-gate configuration because the input signal $V_{in}$ is applied to its **source**, and its **gate** is connected to a constant bias voltage $V_{b1}$.\n*   **$M_1$ (PMOS):** This transistor acts as an **active load** (specifically, a PMOS current source). Its gate is tied to a constant bias voltage $V_{b2}$, and its source is connected to the supply voltage $V_{DD}$. It provides a high incremental resistance at the output node to maximize voltage gain.\n\n### 2. Small-Signal Analysis\nTo find the performance characteristics, we look at the small-signal parameters: $g_m$ (transconductance) and $r_o$ (output resistance).\n\n*   **Voltage Gain ($A_v$):**\n    The gain of a common-gate amplifier is non-inverting. The output voltage $V_{out}$ is taken from the drain of $M_2$.\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx (g_{m2} + g_{mb2}) \\cdot (r_{o1} \\parallel r_{o2})$$\n    Where:\n    *   $g_{m2}$ is the transconductance of $M_2$.\n    *   $g_{mb2}$ is the body-effect transconductance of $M_2$ (since the source is not at a constant potential).\n    *   $r_{o1}$ and $r_{o2}$ are the intrinsic output resistances of $M_1$ and $M_2$, respectively.\n\n*   **Input Impedance ($R_{in}$):**\n    One of the defining characteristics of a CG amplifier is its **low input impedance**, which is approximately:\n    $$R_{in} \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n    (This assumes the load resistance $r_{o1}$ is not excessively large compared to $r_{o2}$).\n\n*   **Output Impedance ($R_{out}$):**\n    The output impedance is the parallel combination of the resistances looking into the drains of both transistors:\n    $$R_{out} = r_{o1} \\parallel [r_{o2}(1 + (g_{m2} + g_{mb2})R_S) + R_S]$$\n    If the input is driven by an ideal voltage source ($R_S = 0$), then:\n    $$R_{out} = r_{o1} \\parallel r_{o2}$$\n\n### 3. Key Characteristics and Advantages\n*   **Non-Inverting Gain:** Unlike the common-source amplifier, the output is in phase with the input.\n*   **High Frequency Response:** The CG stage does not suffer from the **Miller Effect** on the input capacitance because the gate is AC grounded. This makes it suitable for wideband or high-frequency applications.\n*   **Impedance Matching:** Due to its low input impedance and high output impedance, it is often used as a current buffer or for matching a low-impedance source to a high-impedance load.\n\n### 4. Biasing Requirements\nFor the circuit to operate correctly as an amplifier, both transistors must be biased in the **saturation region**:\n*   **For $M_1$ (PMOS):** $V_{SD1} > V_{SG1} - |V_{THP}|$\n*   **For $M_2$ (NMOS):** $V_{DS2} > V_{GS2} - V_{THN}$\nThe bias voltages $V_{b1}$ and $V_{b2}$ must be carefully chosen to ensure these conditions are met for the desired range of $V_{in}$ and $V_{out}$.",
        "format": "markdown",
        "sha256": "764628d7c4ef92ef317ea1e2c1ec0c11c7e90659372e96cb9f08d06dcc50c15e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places Vin at M2’s source, identifies the bias voltages, and gives non-inverting gain with the appropriate gm·(ro1 || ro2) form. It also describes the input resistance as low; the simplified estimate is within the golden solution’s accepted range.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2566,
        "total_tokens": 3676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2566,
        "total_tokens": 3676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Gate (CG) amplifier** with a **PMOS current source load**.\n\n*   **$M_2$ (NMOS)** is the amplifying transistor in a common-gate configuration. The input signal $V_{in}$ is applied to its source, and its gate is held at a constant bias voltage $V_{b1}$.\n*   **$M_1$ (PMOS)** acts as an active load. Its gate is connected to a constant bias voltage $V_{b2}$, making it function as a constant current source that provides high output impedance.\n\n### 2. Small-Signal Analysis\nTo understand the performance, we look at the small-signal parameters:\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain for a common-gate amplifier is positive (non-inverting). It is given by:\n    $$A_v = \\frac{V_{out}}{V_{in}} \\approx (g_{m2} + g_{mb2})(r_{o1} \\parallel r_{o2})$$\n    where:\n    *   $g_{m2}$ is the transconductance of $M_2$.\n    *   $g_{mb2}$ is the body-effect transconductance of $M_2$.\n    *   $r_{o1}$ and $r_{o2}$ are the output resistances of $M_1$ and $M_2$, respectively.\n\n*   **Input Resistance ($R_{in}$):**\n    One of the defining characteristics of a CG amplifier is its low input resistance, looking into the source of $M_2$:\n    $$R_{in} \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n    (This assumes the output resistance $r_{o2}$ is much larger than the load).\n\n*   **Output Resistance ($R_{out}$):**\n    The output resistance is the parallel combination of the resistances looking into the drains of $M_1$ and $M_2$:\n    $$R_{out} = r_{o1} \\parallel r_{o2}$$\n    Because both transistors are in saturation, this results in a high output impedance.\n\n### 3. Key Characteristics and Applications\n*   **Non-Inverting Gain:** Unlike the common-source amplifier, the output signal is in phase with the input signal.\n*   **High-Frequency Performance:** The CG stage does not suffer from the **Miller Effect** on the input capacitance because the gate is AC-grounded. This makes it very useful for wideband and high-frequency applications.\n*   **Impedance Matching:** Due to its low input impedance and high output impedance, it is often used as a **current buffer** or for matching to low-impedance sources (like a $50\\Omega$ antenna).\n*   **Cascoding:** This configuration is frequently used as the second stage in a \"cascode\" amplifier to increase output impedance and gain while improving frequency response.",
        "format": "markdown",
        "sha256": "3361f6e0ab9e350d4baead850063eb4db19386da7b474de39b9d3a8fe77d534e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage, source-driven input, bias voltages, non-inverting gain, and low input resistance. Its gain expression is an acceptable body-effect refinement of the required approximation.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 1768,
        "total_tokens": 2878,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1099,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 1768,
        "total_tokens": 2878,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1099,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Gate (CG) Amplifier** with a **PMOS current-source load**.\n\n*   **$M_2$ (NMOS):** This is the input transistor. The input signal $V_{in}$ is applied to its **source**, and its gate is held at a constant bias voltage $V_{b1}$. This configuration defines a common-gate stage.\n*   **$M_1$ (PMOS):** This transistor acts as an active load. Its gate is connected to a constant bias voltage $V_{b2}$, and its source is at $V_{DD}$. In this state, it functions as a constant current source, providing high incremental resistance at the output node.\n\n### 2. Small-Signal Analysis\nTo find the performance characteristics, we look at the small-signal parameters: $g_m$ (transconductance) and $r_o$ (output resistance) for both transistors.\n\n#### **Voltage Gain ($A_v$)**\nThe voltage gain of a common-gate amplifier is non-inverting. By performing KCL at the output node, the gain is approximately:\n$$A_v = \\frac{v_{out}}{v_{in}} \\approx (g_{m2} + g_{mb2}) (r_{o1} \\parallel r_{o2})$$\nWhere:\n*   $g_{m2}$ is the transconductance of $M_2$.\n*   $g_{mb2}$ is the body-effect transconductance (often significant in CG stages since the source is not grounded).\n*   $r_{o1}$ and $r_{o2}$ are the channel-length modulation resistances of $M_1$ and $M_2$, respectively.\n\n#### **Input Impedance ($R_{in}$)**\nOne of the defining characteristics of a common-gate amplifier is its **low input impedance**. Looking into the source of $M_2$:\n$$R_{in} \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n(This assumes $r_{o2}$ is large. More accurately, the load $r_{o1}$ is \"divided\" by the intrinsic gain of $M_2$ when seen from the input).\n\n#### **Output Impedance ($R_{out}$)**\nThe output impedance is the parallel combination of the resistances seen looking into the drains of $M_1$ and $M_2$:\n$$R_{out} = r_{o1} \\parallel r_{o2}$$\nThis results in a **high output impedance**, typical of current-source loaded stages.\n\n### 3. Key Characteristics and Applications\n*   **Non-Inverting:** Unlike the common-source amplifier, the output signal is in phase with the input signal.\n*   **High-Frequency Performance:** The common-gate stage does not suffer from the **Miller Effect** because there is no large feedback capacitance between the input (source) and output (drain). This makes it excellent for wideband or high-frequency applications.\n*   **Impedance Matching:** Due to its low input resistance and high output resistance, it is often used as a current buffer or for matching a low-impedance source to a high-impedance load.\n\n### Summary Table\n| Parameter | Expression (Approximate) | Characteristic |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $(g_{m2} + g_{mb2})(r_{o1} \\parallel r_{o2})$ | High, Non-inverting |\n| **Input Resistance ($R_{in}$)** | $1 / (g_{m2} + g_{mb2})$ | Low |\n| **Output Resistance ($R_{out}$)** | $r_{o1} \\parallel r_{o2}$ | High |",
        "format": "markdown",
        "sha256": "7f1641a3de776ea135f33d828f8a44bd8edaeffa2f80ac48e8db23984b57c366"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, identifies both biases, and gives the non-inverting gain and low input resistance. Its gain expression is an acceptable body-effect refinement; the optional impedance approximations do not contradict the essential result.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2676,
        "total_tokens": 3786,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2676,
        "total_tokens": 3786,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we can count the number of independent nodes that have a capacitance to ground or to another node. Each such node typically contributes one pole to the transfer function.\n\n1.  **Identify the nodes with capacitance:**\n    *   **Node 1 (Gate of $M_1$):** This node is connected to $V_{in}$ through resistor $R_S$. It has capacitance $C_{GS}$ to ground and $C_{GD}$ to the output node.\n    *   **Node 2 (Output node $V_{out}$):** This is the common drain node for transistors $M_1$ and $M_2$. It has several capacitors connected to it: $C_{GD}$ (from the gate of $M_1$), $C_{DB}$ (to ground), $C_{GD2}$ (to the gate of $M_2$, which is at AC ground), and $C_{DB2}$ (to the body of $M_2$, which is also at AC ground).\n\n2.  **Analyze the independent state variables:**\n    *   The state of this circuit is defined by the voltages at these two nodes because they are the only nodes where charge can be stored independently.\n    *   Although there are five physical capacitors shown, they are all connected between these two nodes and ground. Specifically, $C_{DB}$, $C_{GD2}$, and $C_{DB2}$ are all in parallel at the output node and can be treated as a single equivalent capacitor to ground.\n    *   The capacitor $C_{GD}$ couples the two nodes, but it does not add an additional independent node.\n\n3.  **Conclusion:**\n    Since there are **two** independent nodes with capacitance (the gate of $M_1$ and the output node $V_{out}$), the circuit's transfer function will have a second-order denominator. Therefore, the circuit has **2 poles**.",
        "format": "markdown",
        "sha256": "c791b9aa46d6156e4eb26ad3773979db07d091aa8bf892c0b7400c3dbdf81d19"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the gate of M1 and the output as the two independent capacitive nodes, assigns the capacitors to the proper nodes, and concludes there are two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 2511,
        "total_tokens": 3603,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 2511,
        "total_tokens": 3603,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the circuit, we need to identify the number of independent nodes that have a capacitance to ground or between each other, which corresponds to the number of independent state variables (capacitor voltages) in the system.\n\n1.  **Identify the nodes with independent voltages:**\n    *   **Node 1 (Gate of $M_1$):** This node is connected to the input $V_{in}$ through resistor $R_S$. It has two capacitors connected to it: $C_{GS}$ (to ground) and $C_{GD}$ (to the output node).\n    *   **Node 2 (Output Node $V_{out}$):** This is the common drain node for transistors $M_1$ and $M_2$. It has several capacitors connected to it: $C_{GD}$ (from the gate of $M_1$), $C_{DB}$ (to ground), $C_{GD2}$ (to ground, since the gate of $M_2$ is grounded), and $C_{DB2}$ (to ground).\n\n2.  **Count the independent energy storage elements:**\n    *   The number of poles in a circuit is generally equal to the number of independent capacitor voltages.\n    *   In this circuit, there are two main nodes where the voltage can vary independently: the gate of $M_1$ and the output node.\n    *   While there are five capacitors shown, they are all connected to these two nodes. Specifically, $C_{DB}$, $C_{GD2}$, and $C_{DB2}$ are all in parallel at the output node and can be treated as a single equivalent capacitance to ground. $C_{GS}$ is at the gate node, and $C_{GD}$ couples the two nodes.\n    *   Because there are **two** independent nodes with capacitance, the transfer function of this circuit will have a second-order denominator.\n\nTherefore, the circuit has **2 poles**.",
        "format": "markdown",
        "sha256": "af41a07ef8b00a15187cdada89b577f8b4c61acc077f243242f48a515b9ffedd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the gate of M1 and the output as the two independent capacitive nodes, assigns the capacitors to the right nodes, and concludes that the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1924,
        "total_tokens": 3016,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1509,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 1924,
        "total_tokens": 3016,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1509,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to identify the number of independent nodes that can store energy (i.e., nodes with capacitance to ground or other nodes).\n\n1.  **Identify the Nodes:**\n    *   **Node 1 (Input Node):** This is the gate of transistor $M_1$. It is connected to the input $V_{in}$ through resistor $R_S$.\n    *   **Node 2 (Output Node):** This is the drain of $M_1$ and $M_2$, labeled as $V_{out}$.\n\n2.  **Analyze the Capacitances:**\n    *   At **Node 1**, we have $C_{GS}$ connected to ground and $C_{GD}$ connected to Node 2.\n    *   At **Node 2**, we have $C_{DB}$, $C_{GD2}$, and $C_{DB2}$ all connected to ground (since the gate and source of $M_2$ are at AC ground). Additionally, $C_{GD}$ is connected back to Node 1.\n\n3.  **Determine the Number of Poles:**\n    *   The number of poles in a circuit is generally equal to the number of independent energy storage elements (capacitors) that cannot be simplified into a single equivalent capacitor.\n    *   Alternatively, it is the number of nodes whose voltages are independent state variables. In this circuit, the voltages at Node 1 and Node 2 are the two independent state variables.\n    *   When you write the nodal equations for these two nodes, you get a system of two first-order differential equations. Solving for the transfer function $V_{out}/V_{in}$ results in a denominator that is a **second-order polynomial** in $s$.\n    *   A second-order denominator indicates that the circuit has **2 poles**.\n\n**Conclusion:**\nThe circuit has **2 poles**. One is typically a low-frequency pole associated with the input node (amplified by the Miller effect of $C_{GD}$), and the other is a higher-frequency pole associated with the output node.",
        "format": "markdown",
        "sha256": "ce6ce6d8c09e0a4b37e195392b81a872ee873c8e7cf2c8b27e6a9a14c784abf3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the gate of M1 and the output as the two independent dynamic nodes and concludes there are two poles, with the relevant capacitances assigned to those nodes. The minor imprecision about M2's grounding does not change the reasoning.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 2622,
        "total_tokens": 3714,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2171,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1092,
        "output_tokens": 2622,
        "total_tokens": 3714,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2171,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Source Amplifier** using a **Self-Cascode** (or composite transistor) configuration. It consists of two NMOS transistors, $M_1$ and $M_2$, stacked on top of each other with their gates tied together to the input signal $V_{in}$.\n\n### 2. Component Roles\n*   **$M_1$ (Driver Transistor):** Acts as the primary transconductance element. It converts the input voltage $V_{in}$ into a signal current.\n*   **$M_2$ (Cascode Transistor):** Acts as a buffer for the current from $M_1$. Its primary purpose is to significantly increase the output resistance of the stage.\n*   **$R_D$ (Load Resistor):** The drain load that converts the signal current into the output voltage $V_{out}$.\n\n### 3. DC Analysis and Biasing\nFor the circuit to operate as an effective amplifier, both transistors should ideally be in the **saturation region**.\n*   **$M_1$ Saturation:** Requires $V_{DS1} \\ge V_{GS1} - V_{th1}$. Since $V_{GS1} = V_{in}$, the node between the two transistors must be at a high enough potential.\n*   **$M_2$ Saturation:** Requires $V_{DS2} \\ge V_{GS2} - V_{th2}$.\n*   **Design Note:** In a self-cascode, $M_2$ is typically designed to be much wider than $M_1$ ($W_2 \\gg W_1$). This ensures that for the same drain current, $M_2$ requires a much smaller overdrive voltage ($V_{GS2} - V_{th2}$) than $M_1$. This allows the drain of $M_1$ to sit at a high enough voltage to keep it in saturation without needing a separate bias voltage for the gate of $M_2$.\n\n### 4. Small-Signal Analysis\n*   **Transconductance ($G_m$):** The overall transconductance of the stacked pair is approximately equal to the transconductance of the bottom transistor:\n    $$G_m \\approx g_{m1}$$\n*   **Output Resistance ($R_{out}$):** This is the main advantage of this configuration. The output resistance looking into the drain of $M_2$ is boosted by the cascode effect:\n    $$R_{out} \\approx g_{m2} \\cdot r_{o2} \\cdot r_{o1}$$\n    This is much larger than the output resistance of a single transistor ($r_o$).\n*   **Voltage Gain ($A_v$):** The gain is determined by the total transconductance and the parallel combination of the output resistance and the load resistor:\n    $$A_v = -G_m (R_{out} \\parallel R_D) \\approx -g_{m1} R_D$$\n    (Assuming $R_{out} \\gg R_D$). If $R_D$ were replaced by an active current source load, the gain would be extremely high, proportional to $(g_m r_o)^2$.\n\n### 5. Key Features and Advantages\n1.  **High Output Impedance:** It provides the high output resistance of a cascode amplifier, which improves gain and makes the circuit act as a better current source.\n2.  **No Extra Bias Voltage:** Unlike a standard cascode, it doesn't require an additional DC bias line for the second gate, simplifying the layout and reducing power consumption.\n3.  **Improved Linearity and Shielding:** $M_2$ shields $M_1$ from the large voltage swings at $V_{out}$, which reduces short-channel effects and improves the overall linearity of the amplifier.\n4.  **Voltage Headroom:** It can handle higher supply voltages ($V_{DD}$) because the total voltage drop is shared across two transistors.\n\n### 6. Disadvantages\n*   **Input Capacitance:** Because both gates are tied to $V_{in}$, the total input capacitance is higher than a single-transistor stage. Specifically, $M_2$ introduces a significant **Miller capacitance** effect because its drain ($V_{out}$) undergoes a large voltage swing.\n*   **Voltage Swing:** It requires slightly more \"headroom\" (minimum voltage at $V_{out}$) to keep both transistors in saturation compared to a simple common-source stage.",
        "format": "markdown",
        "sha256": "f97ffc84c6b68bac7e6690d1d71fd16e099fe8c72372ee5b652249901dcb78df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It treats the common-gate-driven stack as a true cascode with both devices saturated and claims cascode-level output-resistance boosting. The essential behavior—M1 in triode and the pair acting approximately as one longer-channel NMOS—is missed.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 6994,
        "total_tokens": 8112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6010,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 6994,
        "total_tokens": 8112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6010,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **common-source amplifier with a cascode transistor ($M_2$)**, where both gates are connected to the same input signal, $V_{in}$. This configuration is sometimes referred to as a **self-cascoded** or **stacked-transistor** amplifier.\n\nHere is a detailed analysis of the circuit:\n\n### 1. Circuit Configuration\n*   **$M_1$ (Bottom Transistor):** Acts as the primary transconductance element. Its source is grounded, and its gate is driven by $V_{in}$.\n*   **$M_2$ (Top Transistor):** Acts as a cascode device. Its source is connected to the drain of $M_1$, and its gate is also driven by $V_{in}$.\n*   **$R_D$:** The drain load resistor connected to the supply voltage $V_{DD}$.\n*   **$V_{out}$:** The output is taken from the drain of $M_2$.\n\n### 2. DC Analysis\nBoth transistors are in series, so they must carry the same drain current ($I_{D1} = I_{D2} = I_D$).\n*   The gate-source voltage for $M_1$ is $V_{GS1} = V_{in}$.\n*   The gate-source voltage for $M_2$ is $V_{GS2} = V_{in} - V_X$, where $V_X$ is the voltage at the node between $M_1$ and $M_2$.\n*   **Operating Regions:** For $M_1$ to be in the saturation region, we need $V_X \\ge V_{in} - V_{th1}$. However, since $V_{GS2} = V_{in} - V_X$, $M_2$ will have a smaller overdrive voltage than $M_1$. If the transistors are identical, $M_1$ will typically be forced into the **triode (linear) region** while $M_2$ remains in saturation. To keep both in saturation, $M_2$ is often designed to be much wider than $M_1$ ($W_2/L_2 > W_1/L_1$).\n\n### 3. Small-Signal Analysis\nLet $g_{m1}, g_{m2}$ be the transconductances and $r_{o1}, r_{o2}$ be the output resistances of the transistors.\n\n*   **Equivalent Transconductance ($G_m$):**\n    The overall transconductance of the stacked pair is approximately equal to the transconductance of the bottom transistor:\n    $$G_m \\approx g_{m1}$$\n*   **Output Resistance ($R_{out}$):**\n    The cascode transistor $M_2$ significantly boosts the output resistance seen at the drain of $M_2$:\n    $$R_{out} \\approx (g_{m2} \\cdot r_{o2}) \\cdot r_{o1}$$\n    This is much higher than the output resistance of a single-transistor common-source amplifier ($r_{o1}$).\n*   **Voltage Gain ($A_v$):**\n    The gain is the product of the overall transconductance and the total resistance at the output node:\n    $$A_v = -G_m \\cdot (R_{out} \\parallel R_D) \\approx -g_{m1} \\cdot \\left[ (g_{m2} r_{o2} r_{o1}) \\parallel R_D \\right]$$\n    If $R_D$ is much smaller than the boosted $R_{out}$, the gain simplifies to $A_v \\approx -g_{m1} R_D$. If $R_D$ is replaced by an active load (like a current source), the gain can be extremely high ($\\propto (g_m r_o)^2$).\n\n### 4. Key Characteristics\n*   **High Output Impedance:** Like a standard cascode, it provides a very high output resistance, which is useful for high-gain stages or current mirrors.\n*   **Simple Biasing:** Unlike a standard cascode, it does not require a separate, stable bias voltage for the gate of $M_2$. This makes it suitable for low-voltage designs where headroom is limited.\n*   **Miller Effect:** Because the gate of $M_2$ is tied to $V_{in}$, the gate-drain capacitance of $M_2$ ($C_{gd2}$) undergoes a full Miller multiplication. This results in a **higher input capacitance** compared to a standard cascode (where the top gate is at AC ground), potentially limiting the high-frequency bandwidth.\n*   **Composite Transistor:** If $M_1$ and $M_2$ are identical, the pair behaves like a single transistor with an effective channel length of $L_1 + L_2$, which helps in reducing short-channel effects.\n\n### Summary\nThis circuit is a **self-cascoded common-source amplifier**. It provides the high output impedance and high gain benefits of a cascode structure without needing an extra bias line, at the cost of increased input capacitance.",
        "format": "markdown",
        "sha256": "fe37cae1a341177970b9b9e7ad473a7a9349b4f295c9ea05a0bfe750784d55de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly notes that identical series devices can act like a transistor with effective channel length about L1 + L2, and it identifies M1 as triode while M2 is saturated. But it then treats the pair as a true cascode and gives a cascode-like output-resistance formula and high-gain conclusion, missing the modest output-resistance increase that follows from the longer-effective-channel mechanism.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 9376,
        "total_tokens": 10494,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 9376,
        "total_tokens": 10494,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Common-Source Amplifier with a Stacked NMOS configuration**. It consists of two NMOS transistors, $M_1$ and $M_2$, connected in series (stacked), with their gates tied together to the input signal $V_{in}$. This specific arrangement is sometimes referred to as a **\"self-cascode\"** or a **\"composite transistor\"** common-source stage.\n\nHere is a detailed analysis of the circuit:\n\n### 1. Circuit Configuration\n*   **Input ($V_{in}$):** Applied to the gates of both $M_1$ and $M_2$.\n*   **Transistor $M_1$:** The bottom transistor acts as the primary transconductance stage. Its source is grounded.\n*   **Transistor $M_2$:** The top transistor acts as a cascode device, but unlike a standard cascode where the gate is at a fixed bias, its gate is driven by the input signal.\n*   **Output ($V_{out}$):** Taken from the drain of $M_2$, which is connected to the supply voltage $V_{DD}$ through a load resistor $R_D$.\n\n### 2. Small-Signal Analysis\nTo understand its performance, we look at the small-signal parameters: transconductance ($G_m$), output resistance ($R_{out}$), and voltage gain ($A_v$).\n\n*   **Overall Transconductance ($G_m$):**\n    The short-circuit transconductance of the stack is dominated by the bottom transistor.\n    $$G_m \\approx g_{m1}$$\n    (Assuming $g_m r_o \\gg 1$ for both transistors). Even though $M_2$ is also driven by $V_{in}$, its main role is to pass the current generated by $M_1$.\n\n*   **Output Resistance ($R_{out}$):**\n    The resistance looking into the drain of $M_2$ is significantly increased due to the stacking effect, similar to a standard cascode:\n    $$R_{out, \\text{stack}} \\approx g_{m2} r_{o2} r_{o1}$$\n    The total output resistance of the amplifier is the parallel combination of this stack resistance and the load resistor:\n    $$R_{out, \\text{total}} = R_{out, \\text{stack}} \\parallel R_D \\approx R_D \\quad (\\text{if } R_D \\ll R_{out, \\text{stack}})$$\n\n*   **Voltage Gain ($A_v$):**\n    The gain is given by the product of the overall transconductance and the total output resistance:\n    $$A_v = -G_m \\cdot R_{out, \\text{total}} \\approx -g_{m1} R_D$$\n    If an active load (like a current source) were used instead of $R_D$, the gain could be much higher, reaching values proportional to $(g_m r_o)^2$.\n\n### 3. Key Advantages and Features\nThis configuration offers several improvements over a simple single-transistor common-source amplifier:\n\n1.  **Reduced Miller Effect:** In a standard common-source stage, the gate-drain capacitance ($C_{gd}$) is multiplied by the gain (Miller effect), significantly increasing input capacitance. In this stacked version, the voltage swing at the drain of $M_1$ is very small (it acts as a \"virtual ground\" for small signals if $M_1$ and $M_2$ are matched). This drastically reduces the Miller multiplication of $C_{gd1}$, leading to a **higher bandwidth** and lower input capacitance.\n2.  **Higher Output Impedance:** The stacking of $M_2$ on top of $M_1$ increases the output resistance by a factor of approximately $g_{m2}r_{o2}$. This makes the amplifier behave more like an ideal current source and allows for higher gain when used with high-impedance loads.\n3.  **Increased Voltage Handling:** The total drain-to-source voltage $(V_{DS})$ is shared between $M_1$ and $M_2$. This allows the circuit to operate with a higher supply voltage $V_{DD}$ than a single transistor could safely handle without breaking down.\n4.  **Improved Linearity:** In some regions of operation, the composite structure can provide better linearity compared to a single transistor with the same total gate area.\n\n### Summary\nThis circuit is a high-performance variant of the common-source amplifier. It is particularly useful in high-frequency applications where minimizing input capacitance is crucial, or in high-gain stages where a very high output impedance is required.",
        "format": "markdown",
        "sha256": "5a7be91a068e0098a5e946faa36d1bfa375e34c7d1ae572768af137d30db6dc5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies two series NMOS devices with common gate drive and a resistive-load common-source stage, but analyzes them as a true cascode, assigns the wrong output-resistance mechanism, and misses the essential result that they act approximately like a single transistor with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 4963,
        "total_tokens": 6081,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3947,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 4963,
        "total_tokens": 6081,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3947,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit is a **MOS differential pair** (also known as a source-coupled pair) configured for **single-ended input** and **single-ended output**. \n*   **$M_1$ and $M_2$** are NMOS transistors forming the differential pair.\n*   **$I_1$** is a tail current source that biases the pair.\n*   **$V_{in}$** is the small-signal input applied to the gate of $M_1$.\n*   **$V_b$** is a constant DC bias voltage applied to the gate of $M_2$.\n*   **$R_D$** is the load resistor for the output stage.\n*   **$V_{out}$** is the output voltage taken from the drain of $M_2$.\n\n### 2. Qualitative Operation\nThis circuit can be viewed as a two-stage amplifier:\n1.  **Source Follower Stage ($M_1$):** The input $V_{in}$ drives the gate of $M_1$. $M_1$ acts as a source follower, causing the voltage at the common source node ($V_P$) to follow $V_{in}$ (with a DC offset).\n2.  **Common-Gate Stage ($M_2$):** The signal at the common source node then drives the source of $M_2$. Since the gate of $M_2$ is at a fixed bias $V_b$, $M_2$ acts as a common-gate amplifier for this signal.\n\n**Phase Relationship:** \n*   As $V_{in}$ increases, the voltage at the common source node increases.\n*   An increase in the source voltage of $M_2$ decreases its gate-to-source voltage ($V_{GS2}$), which reduces the drain current through $M_2$.\n*   A reduction in drain current causes the voltage drop across $R_D$ to decrease, leading to an **increase** in $V_{out}$.\n*   Therefore, the amplifier is **non-inverting**.\n\n### 3. Small-Signal Analysis\nAssuming the transistors are matched ($g_{m1} = g_{m2} = g_m$) and ignoring channel-length modulation ($r_o \\to \\infty$):\n\n*   **Voltage at the common source node ($v_p$):**\n    Due to the symmetry of the differential pair, the small-signal voltage at the source node is exactly half of the input voltage:\n    $$v_p = \\frac{v_{in}}{2}$$\n*   **Drain current of $M_2$ ($i_{d2}$):**\n    The small-signal current through $M_2$ is determined by its $v_{gs}$:\n    $$i_{d2} = g_m(v_{g2} - v_p) = g_m(0 - \\frac{v_{in}}{2}) = -\\frac{g_m v_{in}}{2}$$\n*   **Output Voltage ($v_{out}$):**\n    $$v_{out} = -i_{d2} \\cdot R_D = -(-\\frac{g_m v_{in}}{2}) \\cdot R_D = \\frac{1}{2} g_m R_D v_{in}$$\n\n### 4. Key Performance Parameters\n*   **Voltage Gain ($A_v$):** \n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{1}{2} g_m R_D$$\n    Note that this is half the gain of a standard common-source amplifier because the input signal is effectively split between the two transistors.\n*   **Input Impedance ($R_{in}$):** \n    Ideally **infinite**, as the input is connected to the gate of a MOSFET.\n*   **Output Impedance ($R_{out}$):** \n    Approximately equal to **$R_D$** (assuming $r_{o2}$ is very large).\n*   **Output Swing:** \n    The output voltage can swing between $V_{DD}$ (when $M_2$ is cut off) and $V_{DD} - I_1 R_D$ (when $M_2$ carries the full tail current).\n\n### 5. Summary\nThis configuration is useful when a **non-inverting gain** and **high input impedance** are required. It also provides better linearity and common-mode rejection compared to a simple single-transistor amplifier, although it consumes more power due to the tail current source.",
        "format": "markdown",
        "sha256": "8411639c8d9989e7827688f50abde591e227e3fc55c2107cf05297e9f3a8d936"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair as a source follower driving a common-gate stage, with M2 biased at Vb and output at its drain. The non-inverting sign and matched-device gain are also correct.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2813,
        "total_tokens": 3923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1799,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2813,
        "total_tokens": 3923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1799,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **MOS differential pair with a single-ended output**. It can also be viewed as a cascade of a **source follower** ($M_1$) and a **common-gate amplifier** ($M_2$).\n\nHere is a detailed analysis of the circuit:\n\n### 1. Circuit Topology and Operation\n*   **Transistors $M_1$ and $M_2$:** These form a differential pair. They are biased by a tail current source $I_1$.\n*   **Input ($V_{in}$):** Applied to the gate of $M_1$.\n*   **Bias ($V_b$):** A constant DC voltage applied to the gate of $M_2$.\n*   **Output ($V_{out}$):** Taken from the drain of $M_2$ across the load resistor $R_D$.\n*   **Mechanism:** When $V_{in}$ increases, the source voltage of $M_1$ (the common source node) also increases. Since the gate of $M_2$ is fixed at $V_b$, an increase in the source voltage of $M_2$ decreases its gate-to-source voltage ($V_{GS2}$). This reduces the current flowing through $M_2$. A decrease in current through $R_D$ causes the output voltage $V_{out}$ to rise. Therefore, this is a **non-inverting amplifier**.\n\n### 2. Small-Signal Analysis\nTo find the voltage gain, we assume the transistors are matched ($g_{m1} = g_{m2} = g_m$) and the tail current source $I_1$ is ideal (infinite output resistance).\n\n*   **Common Source Node Voltage ($v_s$):**\n    The small-signal current from $M_1$ must equal the small-signal current into $M_2$ because the tail current $I_1$ is constant.\n    $$g_m(v_{in} - v_s) = g_m(v_s - 0)$$\n    Solving for $v_s$:\n    $$v_{in} - v_s = v_s \\implies v_s = \\frac{v_{in}}{2}$$\n    This shows that the input signal is halved at the common source node.\n\n*   **Output Voltage ($v_{out}$):**\n    The small-signal current through $M_2$ is $i_{d2} = g_m(0 - v_s) = -g_m \\frac{v_{in}}{2}$.\n    The output voltage is the voltage drop across $R_D$:\n    $$v_{out} = -i_{d2} \\cdot R_D = -(-g_m \\frac{v_{in}}{2}) \\cdot R_D = \\frac{g_m R_D}{2} v_{in}$$\n\n*   **Voltage Gain ($A_v$):**\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_D}{2}$$\n    If we consider the output resistance of the transistors ($r_o$), the gain becomes approximately $\\frac{g_m (R_D \\parallel R_{out,M2})}{2}$, where $R_{out,M2}$ is the resistance looking into the drain of $M_2$.\n\n### 3. Key Performance Metrics\n*   **Voltage Gain:** $A_v \\approx \\frac{g_m R_D}{2}$. It is half the gain of a standard common-source amplifier because the input signal is split between the two transistors.\n*   **Input Impedance ($R_{in}$):** Looking into the gate of $M_1$, the impedance is ideally **infinite** (typical for MOSFETs at low frequencies).\n*   **Output Impedance ($R_{out}$):** Looking into the $V_{out}$ node, the impedance is approximately **$R_D$** (assuming $r_{o2}$ is much larger than $R_D$).\n*   **Phase:** The output is **in-phase** with the input (non-inverting).\n\n### 4. Summary\nThis circuit is a fundamental building block in analog IC design. It provides a way to amplify a signal while maintaining high input impedance and providing a non-inverting output. It is often used as the input stage of an operational amplifier or as a simple comparator when $V_b$ is used as a reference voltage.",
        "format": "markdown",
        "sha256": "1f4ac87775506969374fa46ef292dbb86aa259757f5c0e174bf2fbdfbe828958"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both valid views of the circuit, including M2’s gate bias and drain output, and gives the correct non-inverting gain. The full-credit rule is satisfied; minor details about output resistance do not affect the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3176,
        "total_tokens": 4286,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 3176,
        "total_tokens": 4286,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit is a **MOS differential pair** (also known as a source-coupled pair) configured for **single-ended input** and **single-ended output**. \n*   **$M_1$ and $M_2$** are NMOS transistors forming the differential pair.\n*   **$I_1$** is a tail current source that biases the pair.\n*   **$V_{in}$** is the small-signal input applied to the gate of $M_1$.\n*   **$V_b$** is a constant DC bias voltage applied to the gate of $M_2$.\n*   **$R_D$** is the load resistor for the output stage.\n*   **$V_{out}$** is the output voltage taken from the drain of $M_2$.\n\n### 2. Qualitative Operation\nThis circuit can be viewed as a two-stage amplifier:\n1.  **Source Follower Stage ($M_1$):** The input $V_{in}$ drives the gate of $M_1$. $M_1$ acts as a source follower, causing the voltage at the common source node ($V_P$) to follow $V_{in}$ (with a DC offset).\n2.  **Common-Gate Stage ($M_2$):** The signal at the common source node then drives the source of $M_2$. Since the gate of $M_2$ is at a fixed bias $V_b$, $M_2$ acts as a common-gate amplifier for this signal.\n\n**Phase Relationship:** \n*   As $V_{in}$ increases, the voltage at the common source node increases.\n*   An increase in the source voltage of $M_2$ decreases its gate-to-source voltage ($V_{GS2}$), which reduces the drain current through $M_2$.\n*   A reduction in drain current causes the voltage drop across $R_D$ to decrease, leading to an **increase** in $V_{out}$.\n*   Therefore, the amplifier is **non-inverting**.\n\n### 3. Small-Signal Analysis\nAssuming the transistors are matched ($g_{m1} = g_{m2} = g_m$) and ignoring channel-length modulation ($r_o \\to \\infty$):\n\n*   **Voltage at the common source node ($v_p$):**\n    Due to the symmetry of the differential pair, the small-signal voltage at the source node is exactly half of the input voltage:\n    $$v_p = \\frac{v_{in}}{2}$$\n*   **Drain current of $M_2$ ($i_{d2}$):**\n    The small-signal current through $M_2$ is determined by its $v_{gs}$:\n    $$i_{d2} = g_m(v_{g2} - v_p) = g_m(0 - \\frac{v_{in}}{2}) = -\\frac{g_m v_{in}}{2}$$\n*   **Output Voltage ($v_{out}$):**\n    $$v_{out} = -i_{d2} \\cdot R_D = -(-\\frac{g_m v_{in}}{2}) \\cdot R_D = \\frac{1}{2} g_m R_D v_{in}$$\n\n### 4. Key Performance Parameters\n*   **Voltage Gain ($A_v$):** \n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{1}{2} g_m R_D$$\n    Note that this is half the gain of a standard common-source amplifier because the input signal is effectively split between the two transistors.\n*   **Input Impedance ($R_{in}$):** \n    Ideally **infinite**, as the input is connected to the gate of a MOSFET.\n*   **Output Impedance ($R_{out}$):** \n    Approximately equal to **$R_D$** (assuming $r_{o2}$ is very large).\n*   **Output Swing:** \n    The output voltage can swing between $V_{DD}$ (when $M_2$ is cut off) and $V_{DD} - I_1 R_D$ (when $M_2$ carries the full tail current).\n\n### 5. Summary\nThis configuration is useful when a **non-inverting gain** and **high input impedance** are required. It also provides better linearity and common-mode rejection compared to a simple single-transistor amplifier, although it consumes more power due to the tail current source.",
        "format": "markdown",
        "sha256": "8411639c8d9989e7827688f50abde591e227e3fc55c2107cf05297e9f3a8d936"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair as a source follower driving a common-gate stage, with M2 biased at Vb and output at its drain. The non-inverting sign and matched-device gain are also correct.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2813,
        "total_tokens": 3923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1799,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1110,
        "output_tokens": 2813,
        "total_tokens": 3923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1799,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the source follower circuit shown can become inductive due to the interaction between the **gate resistance ($R_S$)** and the **gate-source capacitance ($C_{gs}$)** of the transistor $M_1$.\n\nHere is a step-by-step explanation of why this happens:\n\n### 1. Small-Signal Analysis\nTo find the output impedance ($Z_{out}$), we look into the source of $M_1$. For this analysis, we assume the transistor $M_2$ acts as an ideal current source (infinite impedance) and focus on $M_1$.\n\nWhen a test voltage $v_x$ is applied to the output node, the gate voltage $v_g$ is not fixed. Instead, it is determined by a voltage divider formed by $R_S$ and $C_{gs}$:\n$$v_g = v_x \\frac{s R_S C_{gs}}{1 + s R_S C_{gs}}$$\nThe gate-to-source voltage is then:\n$$v_{gs} = v_g - v_x = v_x \\left( \\frac{s R_S C_{gs}}{1 + s R_S C_{gs}} - 1 \\right) = \\frac{-v_x}{1 + s R_S C_{gs}}$$\n\nThe current $i_x$ flowing into the source is primarily the transconductance current $-g_m v_{gs}$ (ignoring the small current through $C_{gs}$ for simplicity in the first order):\n$$i_x \\approx g_m \\frac{v_x}{1 + s R_S C_{gs}}$$\n\n### 2. The Impedance Expression\nThe output impedance is $Z_{out} = v_x / i_x$. A more complete derivation (including the current through $C_{gs}$) yields:\n$$Z_{out} \\approx \\frac{1 + s R_S C_{gs}}{g_m + s C_{gs}} = \\frac{1}{g_m} \\cdot \\frac{1 + s R_S C_{gs}}{1 + s (C_{gs}/g_m)}$$\n\n### 3. Frequency Behavior\nWe can analyze how $Z_{out}$ changes with frequency:\n*   **At low frequencies ($s \\to 0$):** The capacitors act as open circuits. The impedance is simply the standard source follower output resistance: **$Z_{out} \\approx 1/g_m$**.\n*   **At high frequencies ($s \\to \\infty$):** The $C_{gs}$ capacitor acts as a short circuit, effectively connecting the gate to the source. The impedance approaches the gate resistance: **$Z_{out} \\approx R_S$**.\n\n### 4. Why it is \"Inductive\"\nIf the gate resistance $R_S$ is larger than $1/g_m$, the output impedance **increases** as frequency increases (moving from $1/g_m$ toward $R_S$). \n*   An impedance that increases with frequency is a characteristic of an **inductor** ($Z_L = j\\omega L$).\n*   Mathematically, if $R_S > 1/g_m$, the zero in the transfer function ($1/R_S C_{gs}$) occurs at a lower frequency than the pole ($g_m/C_{gs}$). In the frequency range between this zero and pole, the phase of the impedance is positive, meaning the **current lags the voltage**.\n\n### Physical Intuition\nIn an inductor, the current lags the voltage. In this circuit, when the output voltage $v_{out}$ changes, the gate voltage $v_g$ \"lags\" behind because of the $R_S C_{gs}$ low-pass filter. Since the transistor's current is controlled by the gate-source voltage, the resulting current change also lags the voltage change at the source. This phase lag makes the circuit look like an inductor to whatever is connected to the output.\n\n**Practical Consequence:** This inductive behavior is a common cause of instability. If you connect a capacitive load to this circuit, the inductive output impedance can resonate with the load capacitance, leading to \"ringing\" or even sustained oscillations.",
        "format": "markdown",
        "sha256": "85ab57200e9bb70c8a6d1e252afb74993ee9c949f223d485623b45b20ed5b1fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower mechanism, gives the right impedance and low-/high-frequency limits, and explains that it rises with frequency and is inductive when R_S > 1/g_m.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3241,
        "total_tokens": 4323,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2327,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3241,
        "total_tokens": 4323,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2327,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the source follower circuit shown can become **inductive** due to the interaction between the gate-source capacitance ($C_{gs}$) of transistor $M_1$ and the gate resistance $R_S$.\n\nHere is a step-by-step explanation of why this happens:\n\n### 1. Small-Signal Analysis\nTo find the output impedance ($Z_{out}$), we look into the source of $M_1$. If we ignore the output resistance $r_o$ for simplicity, the impedance is primarily determined by the transconductance $g_m$ and the feedback through $C_{gs}$.\n\nWhen a test voltage $v_x$ is applied to the output, it couples to the gate through $C_{gs}$. The gate is connected to ground (for small-signal analysis) through the resistor $R_S$. This forms a voltage divider, and the gate voltage $v_g$ becomes:\n$$v_g = v_x \\frac{s R_S C_{gs}}{1 + s R_S C_{gs}}$$\n\nThe gate-to-source voltage is then:\n$$v_{gs} = v_g - v_x = v_x \\left( \\frac{s R_S C_{gs}}{1 + s R_S C_{gs}} - 1 \\right) = \\frac{-v_x}{1 + s R_S C_{gs}}$$\n\n### 2. The Impedance Formula\nThe current $i_x$ flowing into the output is the sum of the current through the transistor ($g_m \\cdot -v_{gs}$) and the current through $C_{gs}$. The resulting output impedance $Z_{out} = v_x / i_x$ can be derived as:\n$$Z_{out} \\approx \\frac{1 + s R_S C_{gs}}{g_m + s C_{gs}} = \\frac{1}{g_m} \\cdot \\frac{1 + s R_S C_{gs}}{1 + s (C_{gs}/g_m)}$$\n\n### 3. Why it is Inductive\nAn impedance is inductive if its magnitude increases with frequency and its phase is positive. Looking at the formula above:\n* **Low Frequency:** $Z_{out} \\approx 1/g_m$ (purely resistive).\n* **High Frequency:** $Z_{out} \\approx R_S$ (purely resistive).\n* **Intermediate Frequencies:** If **$R_S > 1/g_m$**, the zero in the numerator ($1/R_S C_{gs}$) occurs at a lower frequency than the pole in the denominator ($g_m/C_{gs}$). \n\nIn the region between the zero and the pole, the impedance magnitude rises with frequency. This rising characteristic is exactly how an inductor behaves. In fact, for frequencies well below the pole, the expression can be approximated as:\n$$Z_{out} \\approx \\frac{1}{g_m} + s \\left( \\frac{R_S C_{gs}}{g_m} \\right)$$\nThis looks like a resistor ($1/g_m$) in series with an inductor of value **$L_{eq} = \\frac{R_S C_{gs}}{g_m}$**.\n\n### 4. Physical Intuition\nWhen the output voltage $v_{out}$ rises quickly, the gate voltage $v_g$ tries to follow it through $C_{gs}$. However, the resistor $R_S$ creates a **delay** (time constant $R_S C_{gs}$). \nBecause $v_g$ lags behind $v_{out}$, the transistor does not turn \"off\" as quickly as it would if the gate were grounded. This delay in the current response relative to the voltage change is the fundamental property of an inductor (where current lags voltage).\n\n### Summary\nThe output impedance is inductive when **$R_S > 1/g_m$**. This effect is often used in RF design to create \"active inductors\" or to compensate for capacitive loads, but it can also lead to unwanted ringing or instability if not carefully managed.",
        "format": "markdown",
        "sha256": "36008a9922e40125dd5547122d09641c7c8d9e2c83c80a7d596f0280dbbeebfc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower mechanism and the low-frequency 1/gm to high-frequency RS transition as Cgs shorts gate to source, with inductive behavior when RS > 1/gm. The equivalent-inductance approximation is imprecise, but the essential explanation is correct.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 4041,
        "total_tokens": 5123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3151,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 4041,
        "total_tokens": 5123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3151,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the source follower circuit shown can become inductive due to the interaction between the **gate resistance ($R_S$)** and the **gate-source capacitance ($C_{gs}$)** of the transistor $M_1$.\n\nHere is a step-by-step explanation of why this happens:\n\n### 1. Small-Signal Analysis\nTo find the output impedance ($Z_{out}$), we look into the source of $M_1$. For this analysis, we assume the transistor $M_2$ acts as an ideal current source (infinite impedance) and focus on $M_1$.\n\nWhen a test voltage $v_x$ is applied to the output node, the gate voltage $v_g$ is not fixed. Instead, it is determined by a voltage divider formed by $R_S$ and $C_{gs}$:\n$$v_g = v_x \\frac{s R_S C_{gs}}{1 + s R_S C_{gs}}$$\nThe gate-to-source voltage is then:\n$$v_{gs} = v_g - v_x = v_x \\left( \\frac{s R_S C_{gs}}{1 + s R_S C_{gs}} - 1 \\right) = \\frac{-v_x}{1 + s R_S C_{gs}}$$\n\nThe current $i_x$ flowing into the source is primarily the transconductance current $-g_m v_{gs}$ (ignoring the small current through $C_{gs}$ for simplicity in the first order):\n$$i_x \\approx g_m \\frac{v_x}{1 + s R_S C_{gs}}$$\n\n### 2. The Impedance Expression\nThe output impedance is $Z_{out} = v_x / i_x$. A more complete derivation (including the current through $C_{gs}$) yields:\n$$Z_{out} \\approx \\frac{1 + s R_S C_{gs}}{g_m + s C_{gs}} = \\frac{1}{g_m} \\cdot \\frac{1 + s R_S C_{gs}}{1 + s (C_{gs}/g_m)}$$\n\n### 3. Frequency Behavior\nWe can analyze how $Z_{out}$ changes with frequency:\n*   **At low frequencies ($s \\to 0$):** The capacitors act as open circuits. The impedance is simply the standard source follower output resistance: **$Z_{out} \\approx 1/g_m$**.\n*   **At high frequencies ($s \\to \\infty$):** The $C_{gs}$ capacitor acts as a short circuit, effectively connecting the gate to the source. The impedance approaches the gate resistance: **$Z_{out} \\approx R_S$**.\n\n### 4. Why it is \"Inductive\"\nIf the gate resistance $R_S$ is larger than $1/g_m$, the output impedance **increases** as frequency increases (moving from $1/g_m$ toward $R_S$). \n*   An impedance that increases with frequency is a characteristic of an **inductor** ($Z_L = j\\omega L$).\n*   Mathematically, if $R_S > 1/g_m$, the zero in the transfer function ($1/R_S C_{gs}$) occurs at a lower frequency than the pole ($g_m/C_{gs}$). In the frequency range between this zero and pole, the phase of the impedance is positive, meaning the **current lags the voltage**.\n\n### Physical Intuition\nIn an inductor, the current lags the voltage. In this circuit, when the output voltage $v_{out}$ changes, the gate voltage $v_g$ \"lags\" behind because of the $R_S C_{gs}$ low-pass filter. Since the transistor's current is controlled by the gate-source voltage, the resulting current change also lags the voltage change at the source. This phase lag makes the circuit look like an inductor to whatever is connected to the output.\n\n**Practical Consequence:** This inductive behavior is a common cause of instability. If you connect a capacitive load to this circuit, the inductive output impedance can resonate with the load capacitance, leading to \"ringing\" or even sustained oscillations.",
        "format": "markdown",
        "sha256": "85ab57200e9bb70c8a6d1e252afb74993ee9c949f223d485623b45b20ed5b1fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower mechanism, gives the right impedance and low-/high-frequency limits, and explains that it rises with frequency and is inductive when R_S > 1/g_m.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3241,
        "total_tokens": 4323,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2327,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1082,
        "output_tokens": 3241,
        "total_tokens": 4323,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2327,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **transresistance amplifier** (a current-to-voltage converter) that utilizes **shunt-shunt negative feedback**.\n\nHere is a detailed analysis of its operation:\n\n### 1. Circuit Components and Roles\n*   **$M_1$ and $R_{D1}$**: These form a standard **common-source (CS) amplifier**. $M_1$ acts as the amplifying device, and $R_{D1}$ is the drain load. The input to this stage is the voltage at node $X$ ($V_X$), and the output is $V_{out}$.\n*   **$M_2$**: This transistor provides the **negative feedback**. Its gate is connected to the output ($V_{out}$), and its drain is connected back to the input node $X$. It senses the output voltage and returns a current to the input.\n*   **$I_{in}$**: This is the input signal, a current source.\n\n### 2. Feedback Mechanism (Shunt-Shunt)\n*   **Shunt at Input**: The feedback current from $M_2$'s drain is summed with the input current $I_{in}$ at node $X$.\n*   **Shunt at Output**: The feedback transistor $M_2$ senses the output voltage $V_{out}$ directly at the output node.\n*   **Negative Feedback Loop**: \n    1. If $I_{in}$ increases, the voltage at node $X$ ($V_X$) tends to rise.\n    2. An increase in $V_X$ causes $M_1$ to pull more current, which lowers the output voltage $V_{out}$ (due to the inverting nature of the CS stage).\n    3. A decrease in $V_{out}$ reduces the gate-source voltage of $M_2$, thereby decreasing its drain current ($I_{D2}$).\n    4. Since $I_{in} \\approx I_{D2}$ (neglecting the gate current of $M_1$), the loop works to stabilize the voltages.\n\n### 3. DC Analysis\nAssuming both transistors are in the saturation region:\n*   At node $X$, KCL gives: $I_{in} = I_{D2}$ (since $I_{G1} = 0$).\n*   The drain current of $M_2$ is: $I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{out} - V_{th2})^2$.\n*   Equating these, we can find the DC output voltage:\n    $$V_{out} = V_{th2} + \\sqrt{\\frac{2 I_{in}}{\\mu_n C_{ox} (W/L)_2}}$$\n    This shows that the output voltage is proportional to the square root of the input current.\n\n### 4. Small-Signal Analysis\nTo find the transresistance gain $R_m = \\frac{v_{out}}{i_{in}}$:\n*   The open-loop gain (transresistance) is $A_v \\approx -g_{m1}(R_{D1} || r_{o1}) \\cdot r_{o2}$.\n*   The feedback factor is $\\beta = \\frac{i_{fb}}{v_{out}} = g_{m2}$.\n*   For a large loop gain ($T = A\\beta \\gg 1$), the closed-loop gain is approximately:\n    $$R_{mf} = \\frac{v_{out}}{i_{in}} \\approx -\\frac{1}{\\beta} = -\\frac{1}{g_{m2}}$$\n*   Substituting $g_{m2} = \\sqrt{2 \\mu_n C_{ox} (W/L)_2 I_{in}}$, we see the small-signal gain depends on the bias current.\n\n### 5. Key Characteristics\n*   **Input Impedance ($R_{in}$)**: Due to the shunt feedback at the input, the input impedance is very low, which is ideal for a current-input stage.\n    $$R_{in} \\approx \\frac{1}{g_{m1} g_{m2} (R_{D1} || r_{o1})}$$\n*   **Output Impedance ($R_{out}$)**: Due to the shunt feedback at the output, the output impedance is also significantly reduced, making it a good voltage source.\n    $$R_{out} \\approx \\frac{1}{g_{m1} g_{m2} r_{o2}}$$\n\n### Summary\nThis circuit acts as a **low-impedance current-to-voltage converter**. It is often used in applications where a current signal (e.g., from a photodiode) needs to be converted into a voltage with high precision and stability provided by the negative feedback loop.",
        "format": "markdown",
        "sha256": "8fdda18cbaf0a62bd05ae6021eede6c9131112a5d9c6e9ad4b4a48d130f00601"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M1 as a common-source stage and M2’s gate connection to Vout, but reverses the loop sign: the circuit has positive feedback, not stabilizing negative feedback. Its stable transresistance-amplifier conclusion and positive, low-input-resistance claims miss the central result of negative resistance and possible latching.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 3863,
        "total_tokens": 4981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2812,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 3863,
        "total_tokens": 4981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2812,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the circuit shown in the figure, we will examine its DC behavior, small-signal characteristics, and stability.\n\n### 1. Circuit Identification\nThe circuit consists of two NMOS transistors, $M_1$ and $M_2$, a resistor $R_{D1}$, and a current source $I_{\\text{in}}$.\n*   **$M_1$ and $R_{D1}$** form a common-source amplifier stage. The input is at node $X$ (gate of $M_1$) and the output is at node $V_{\\text{out}}$ (drain of $M_1$).\n*   **$M_2$** acts as a feedback element. Its gate is connected to the output $V_{\\text{out}}$, and its drain is connected back to the input node $X$.\n*   **$I_{\\text{in}}$** is an ideal current source that injects current into node $X$.\n\n### 2. DC Analysis\nIn a steady-state equilibrium, the current entering node $X$ must equal the current leaving it. Assuming the gate current of $M_1$ is zero ($I_{G1} = 0$):\n$$I_{\\text{in}} = I_{D2}$$\nIf $M_2$ is in the saturation region, its drain current is given by:\n$$I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{GS2} - V_{TH2})^2$$\nSince $V_{GS2} = V_{\\text{out}}$, we can find the equilibrium output voltage:\n$$V_{\\text{out}} = V_{TH2} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{ox} (W/L)_2}}$$\nThis equation suggests that $V_{\\text{out}}$ is determined primarily by the input current $I_{\\text{in}}$ and the characteristics of $M_2$.\n\nAt the output node, the voltage is also determined by $M_1$ and $R_{D1}$:\n$$V_{\\text{out}} = V_{DD} - I_{D1} R_{D1}$$\nThis sets the required drain current for $M_1$: $I_{D1} = (V_{DD} - V_{\\text{out}}) / R_{D1}$. The gate voltage $V_X$ will then adjust itself to a value that supports this $I_{D1}$:\n$$V_X = V_{TH1} + \\sqrt{\\frac{2 I_{D1}}{\\mu_n C_{ox} (W/L)_1}}$$\n\n### 3. Small-Signal and Feedback Analysis\nLet's determine the nature of the feedback loop.\n1.  Suppose the voltage at node $X$ ($V_X$) increases slightly.\n2.  As $V_X$ increases, the drain current of $M_1$ ($I_{D1}$) increases.\n3.  An increase in $I_{D1}$ causes the output voltage $V_{\\text{out}}$ to decrease (due to the voltage drop across $R_{D1}$).\n4.  A decrease in $V_{\\text{out}}$ (which is the gate voltage of $M_2$) causes the drain current of $M_2$ ($I_{D2}$) to decrease.\n5.  Since $I_{\\text{in}}$ is a constant current source, a decrease in $I_{D2}$ means there is a net current $(I_{\\text{in}} - I_{D2})$ that charges the parasitic capacitance at node $X$, causing $V_X$ to increase even further.\n\nBecause an initial increase in $V_X$ leads to a further increase in $V_X$, the circuit employs **positive feedback**.\n\n**Loop Gain ($T$):**\nBreaking the loop at the gate of $M_1$, the gain from $V_X$ to $V_{\\text{out}}$ is $A_1 = -g_{m1}(R_{D1} \\parallel r_{o1})$. The gain from $V_{\\text{out}}$ back to $V_X$ (considering $M_2$ as a transconductance stage feeding the resistance at node $X$) is $A_2 \\approx -g_{m2} r_{o2}$.\nThe total loop gain is:\n$$T = A_1 \\cdot A_2 \\approx g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2}$$\nSince $T$ is positive and typically much greater than 1 for standard MOSFET parameters, the circuit is unstable.\n\n### 4. Conclusion\nThe circuit is a **bistable latch** or a **Schmitt trigger** configuration. Due to the high-gain positive feedback loop, it will not stay at the calculated DC equilibrium point. Instead, it will \"snap\" to one of two stable states:\n*   **State 1:** $V_X$ is high, $M_1$ is heavily conducting (possibly in triode), $V_{\\text{out}}$ is low, and $M_2$ is nearly or completely cut off.\n*   **State 2:** $V_X$ is low, $M_1$ is nearly cut off, $V_{\\text{out}}$ is high, and $M_2$ is heavily conducting, pulling all of $I_{\\text{in}}$ to ground.\n\nIn summary, this circuit acts as a **current-controlled latch** rather than a linear amplifier.",
        "format": "markdown",
        "sha256": "8de092a6510439b43c30cd05aa0afc7873449ecde5ba0775ce12a2dc36e40921"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection to Vout, the positive-feedback loop through M1 and M2, and the resulting instability and latching behavior. Minor imprecision in the DC discussion and calling it a Schmitt trigger does not undermine the essential answer.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 11431,
        "total_tokens": 12549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10212,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 11431,
        "total_tokens": 12549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10212,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the circuit shown in the figure, we will examine its DC behavior, small-signal characteristics, and stability.\n\n### 1. Circuit Identification\nThe circuit consists of two NMOS transistors, $M_1$ and $M_2$, a resistor $R_{D1}$, and a current source $I_{\\text{in}}$.\n*   **$M_1$ and $R_{D1}$** form a common-source amplifier stage. The input is at node $X$ (gate of $M_1$) and the output is at node $V_{\\text{out}}$ (drain of $M_1$).\n*   **$M_2$** acts as a feedback element. Its gate is connected to the output $V_{\\text{out}}$, and its drain is connected back to the input node $X$.\n*   **$I_{\\text{in}}$** is an ideal current source that injects current into node $X$.\n\n### 2. DC Analysis\nIn a steady-state equilibrium, the current entering node $X$ must equal the current leaving it. Assuming the gate current of $M_1$ is zero ($I_{G1} = 0$):\n$$I_{\\text{in}} = I_{D2}$$\nIf $M_2$ is in the saturation region, its drain current is given by:\n$$I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{GS2} - V_{TH2})^2$$\nSince $V_{GS2} = V_{\\text{out}}$, we can find the equilibrium output voltage:\n$$V_{\\text{out}} = V_{TH2} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{ox} (W/L)_2}}$$\nThis equation suggests that $V_{\\text{out}}$ is determined primarily by the input current $I_{\\text{in}}$ and the characteristics of $M_2$.\n\nAt the output node, the voltage is also determined by $M_1$ and $R_{D1}$:\n$$V_{\\text{out}} = V_{DD} - I_{D1} R_{D1}$$\nThis sets the required drain current for $M_1$: $I_{D1} = (V_{DD} - V_{\\text{out}}) / R_{D1}$. The gate voltage $V_X$ will then adjust itself to a value that supports this $I_{D1}$:\n$$V_X = V_{TH1} + \\sqrt{\\frac{2 I_{D1}}{\\mu_n C_{ox} (W/L)_1}}$$\n\n### 3. Small-Signal and Feedback Analysis\nLet's determine the nature of the feedback loop.\n1.  Suppose the voltage at node $X$ ($V_X$) increases slightly.\n2.  As $V_X$ increases, the drain current of $M_1$ ($I_{D1}$) increases.\n3.  An increase in $I_{D1}$ causes the output voltage $V_{\\text{out}}$ to decrease (due to the voltage drop across $R_{D1}$).\n4.  A decrease in $V_{\\text{out}}$ (which is the gate voltage of $M_2$) causes the drain current of $M_2$ ($I_{D2}$) to decrease.\n5.  Since $I_{\\text{in}}$ is a constant current source, a decrease in $I_{D2}$ means there is a net current $(I_{\\text{in}} - I_{D2})$ that charges the parasitic capacitance at node $X$, causing $V_X$ to increase even further.\n\nBecause an initial increase in $V_X$ leads to a further increase in $V_X$, the circuit employs **positive feedback**.\n\n**Loop Gain ($T$):**\nBreaking the loop at the gate of $M_1$, the gain from $V_X$ to $V_{\\text{out}}$ is $A_1 = -g_{m1}(R_{D1} \\parallel r_{o1})$. The gain from $V_{\\text{out}}$ back to $V_X$ (considering $M_2$ as a transconductance stage feeding the resistance at node $X$) is $A_2 \\approx -g_{m2} r_{o2}$.\nThe total loop gain is:\n$$T = A_1 \\cdot A_2 \\approx g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2}$$\nSince $T$ is positive and typically much greater than 1 for standard MOSFET parameters, the circuit is unstable.\n\n### 4. Conclusion\nThe circuit is a **bistable latch** or a **Schmitt trigger** configuration. Due to the high-gain positive feedback loop, it will not stay at the calculated DC equilibrium point. Instead, it will \"snap\" to one of two stable states:\n*   **State 1:** $V_X$ is high, $M_1$ is heavily conducting (possibly in triode), $V_{\\text{out}}$ is low, and $M_2$ is nearly or completely cut off.\n*   **State 2:** $V_X$ is low, $M_1$ is nearly cut off, $V_{\\text{out}}$ is high, and $M_2$ is heavily conducting, pulling all of $I_{\\text{in}}$ to ground.\n\nIn summary, this circuit acts as a **current-controlled latch** rather than a linear amplifier.",
        "format": "markdown",
        "sha256": "8de092a6510439b43c30cd05aa0afc7873449ecde5ba0775ce12a2dc36e40921"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection to Vout, the positive-feedback loop through M1 and M2, and the resulting instability and latching behavior. Minor imprecision in the DC discussion and calling it a Schmitt trigger does not undermine the essential answer.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 11431,
        "total_tokens": 12549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10212,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1118,
        "output_tokens": 11431,
        "total_tokens": 12549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10212,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **two-stage transimpedance amplifier (TIA)** with **shunt-shunt negative feedback**. It is designed to convert an input current ($I_{in}$) into an output voltage ($V_{out}$).\n\nHere is a detailed analysis of the circuit:\n\n### 1. Circuit Topology and Stages\n*   **First Stage ($M_1$):** Transistor $M_1$ is in a **common-gate (CG)** configuration. The input current $I_{in}$ is applied to its source, and its gate is biased at a constant voltage $V_b$. The common-gate stage provides a low input impedance, which is ideal for sensing current.\n*   **Second Stage ($M_2$):** Transistor $M_2$ is in a **common-source (CS)** configuration. Its gate is connected to the drain of $M_1$ (node $X$), and its source is grounded. This stage provides additional voltage gain and a phase reversal.\n*   **Feedback Network ($R_F$):** The resistor $R_F$ connects the output node ($V_{out}$) back to the input node (source of $M_1$). This is a **shunt-shunt feedback** configuration because it samples the output voltage and returns a current to the input node.\n\n### 2. Qualitative Operation and Feedback Polarity\nLet's trace a small-signal increase in the input current $i_{in}$:\n1.  An increase in $i_{in}$ causes the voltage at the source of $M_1$ to increase.\n2.  Since the gate of $M_1$ is fixed at $V_b$, the gate-source voltage ($v_{gs1}$) decreases.\n3.  A decrease in $v_{gs1}$ leads to a decrease in the drain current of $M_1$.\n4.  A decrease in $M_1$'s drain current causes the voltage at node $X$ to increase (less voltage drop across $R_{D1}$).\n5.  An increase in $v_x$ (which is $v_{gs2}$) causes the drain current of $M_2$ to increase.\n6.  An increase in $M_2$'s drain current causes the output voltage $V_{out}$ to decrease (more voltage drop across $R_{D2}$).\n7.  The decrease in $V_{out}$ pulls current away from the input node through $R_F$, opposing the initial increase in $i_{in}$. This confirms that the feedback is **negative**.\n\n### 3. Quantitative Analysis (Small-Signal)\n*   **Open-Loop Transimpedance Gain ($R_{m,ol}$):**\n    Without the feedback resistor $R_F$ (but accounting for its loading), the gain from $i_{in}$ to $v_{out}$ is approximately:\n    $$R_{m,ol} = \\frac{v_{out}}{i_{in}} \\approx g_{m2} \\cdot R_{D1} \\cdot R_{D2}$$\n    (Assuming $i_{d1} \\approx i_{in}$ and neglecting transistor output resistances $r_o$).\n\n*   **Closed-Loop Transimpedance Gain ($R_{m,f}$):**\n    For a transimpedance amplifier with high loop gain, the closed-loop gain is primarily determined by the feedback resistor:\n    $$R_{m,f} = \\frac{v_{out}}{i_{in}} \\approx -R_F$$\n    The negative sign indicates the phase inversion between the input current and output voltage.\n\n*   **Input and Output Impedances:**\n    *   **Input Impedance ($R_{in,f}$):** The shunt feedback at the input significantly reduces the input impedance. The open-loop input impedance is already low ($\\approx 1/g_{m1}$ due to the CG stage). The feedback reduces it further by a factor of $(1 + \\text{Loop Gain})$, making it an excellent current buffer.\n    *   **Output Impedance ($R_{out,f}$):** The shunt feedback at the output also reduces the output impedance, making the circuit act more like an ideal voltage source at the output.\n\n### 4. Summary of Characteristics\n| Parameter | Characteristic |\n| :--- | :--- |\n| **Amplifier Type** | Transimpedance (Current-to-Voltage) |\n| **Feedback Type** | Shunt-Shunt Negative Feedback |\n| **Gain ($v_{out}/i_{in}$)** | $\\approx -R_F$ |\n| **Input Impedance** | Very Low (improved by CG stage and shunt feedback) |\n| **Output Impedance** | Low (improved by shunt feedback) |\n\n### Applications\nThis circuit is commonly used in high-speed communication systems, such as **optical fiber receivers**, where a photodiode produces a small input current that needs to be converted into a usable voltage signal with high bandwidth and low noise.",
        "format": "markdown",
        "sha256": "b3082f55ce72e8e41d725daac4c5a3af309569dabf6212a4c0faddb85bc5c6c9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input, forming a transimpedance amplifier with negative feedback. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4024,
        "total_tokens": 5117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4024,
        "total_tokens": 5117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **two-stage transimpedance amplifier (TIA)** with **shunt-shunt negative feedback**. It is designed to convert an input current ($I_{in}$) into an output voltage ($V_{out}$).\n\nHere is a detailed analysis of the circuit:\n\n### 1. Circuit Topology and Stages\n*   **First Stage ($M_1$):** Transistor $M_1$ is in a **common-gate (CG)** configuration. The input current $I_{in}$ is applied to its source, and its gate is biased at a constant voltage $V_b$. The common-gate stage provides a low input impedance, which is ideal for sensing current.\n*   **Second Stage ($M_2$):** Transistor $M_2$ is in a **common-source (CS)** configuration. Its gate is connected to the drain of $M_1$ (node $X$), and its source is grounded. This stage provides additional voltage gain and a phase reversal.\n*   **Feedback Network ($R_F$):** The resistor $R_F$ connects the output node ($V_{out}$) back to the input node (source of $M_1$). This is a **shunt-shunt feedback** configuration because it samples the output voltage and returns a current to the input node.\n\n### 2. Qualitative Operation and Feedback Polarity\nLet's trace a small-signal increase in the input current $i_{in}$:\n1.  An increase in $i_{in}$ causes the voltage at the source of $M_1$ to increase.\n2.  Since the gate of $M_1$ is fixed at $V_b$, the gate-source voltage ($v_{gs1}$) decreases.\n3.  A decrease in $v_{gs1}$ leads to a decrease in the drain current of $M_1$.\n4.  A decrease in $M_1$'s drain current causes the voltage at node $X$ to increase (less voltage drop across $R_{D1}$).\n5.  An increase in $v_x$ (which is $v_{gs2}$) causes the drain current of $M_2$ to increase.\n6.  An increase in $M_2$'s drain current causes the output voltage $V_{out}$ to decrease (more voltage drop across $R_{D2}$).\n7.  The decrease in $V_{out}$ pulls current away from the input node through $R_F$, opposing the initial increase in $i_{in}$. This confirms that the feedback is **negative**.\n\n### 3. Quantitative Analysis (Small-Signal)\n*   **Open-Loop Transimpedance Gain ($R_{m,ol}$):**\n    Without the feedback resistor $R_F$ (but accounting for its loading), the gain from $i_{in}$ to $v_{out}$ is approximately:\n    $$R_{m,ol} = \\frac{v_{out}}{i_{in}} \\approx g_{m2} \\cdot R_{D1} \\cdot R_{D2}$$\n    (Assuming $i_{d1} \\approx i_{in}$ and neglecting transistor output resistances $r_o$).\n\n*   **Closed-Loop Transimpedance Gain ($R_{m,f}$):**\n    For a transimpedance amplifier with high loop gain, the closed-loop gain is primarily determined by the feedback resistor:\n    $$R_{m,f} = \\frac{v_{out}}{i_{in}} \\approx -R_F$$\n    The negative sign indicates the phase inversion between the input current and output voltage.\n\n*   **Input and Output Impedances:**\n    *   **Input Impedance ($R_{in,f}$):** The shunt feedback at the input significantly reduces the input impedance. The open-loop input impedance is already low ($\\approx 1/g_{m1}$ due to the CG stage). The feedback reduces it further by a factor of $(1 + \\text{Loop Gain})$, making it an excellent current buffer.\n    *   **Output Impedance ($R_{out,f}$):** The shunt feedback at the output also reduces the output impedance, making the circuit act more like an ideal voltage source at the output.\n\n### 4. Summary of Characteristics\n| Parameter | Characteristic |\n| :--- | :--- |\n| **Amplifier Type** | Transimpedance (Current-to-Voltage) |\n| **Feedback Type** | Shunt-Shunt Negative Feedback |\n| **Gain ($v_{out}/i_{in}$)** | $\\approx -R_F$ |\n| **Input Impedance** | Very Low (improved by CG stage and shunt feedback) |\n| **Output Impedance** | Low (improved by shunt feedback) |\n\n### Applications\nThis circuit is commonly used in high-speed communication systems, such as **optical fiber receivers**, where a photodiode produces a small input current that needs to be converted into a usable voltage signal with high bandwidth and low noise.",
        "format": "markdown",
        "sha256": "b3082f55ce72e8e41d725daac4c5a3af309569dabf6212a4c0faddb85bc5c6c9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input, forming a transimpedance amplifier with negative feedback. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4024,
        "total_tokens": 5117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4024,
        "total_tokens": 5117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **two-stage transimpedance amplifier (TIA)** with **shunt-shunt negative feedback**. It is designed to convert an input current ($I_{in}$) into an output voltage ($V_{out}$).\n\nHere is a detailed analysis of the circuit:\n\n### 1. Circuit Topology and Stages\n*   **First Stage ($M_1$):** Transistor $M_1$ is in a **common-gate (CG)** configuration. The input current $I_{in}$ is applied to its source, and its gate is biased at a constant voltage $V_b$. The common-gate stage provides a low input impedance, which is ideal for sensing current.\n*   **Second Stage ($M_2$):** Transistor $M_2$ is in a **common-source (CS)** configuration. Its gate is connected to the drain of $M_1$ (node $X$), and its source is grounded. This stage provides additional voltage gain and a phase reversal.\n*   **Feedback Network ($R_F$):** The resistor $R_F$ connects the output node ($V_{out}$) back to the input node (source of $M_1$). This is a **shunt-shunt feedback** configuration because it samples the output voltage and returns a current to the input node.\n\n### 2. Qualitative Operation and Feedback Polarity\nLet's trace a small-signal increase in the input current $i_{in}$:\n1.  An increase in $i_{in}$ causes the voltage at the source of $M_1$ to increase.\n2.  Since the gate of $M_1$ is fixed at $V_b$, the gate-source voltage ($v_{gs1}$) decreases.\n3.  A decrease in $v_{gs1}$ leads to a decrease in the drain current of $M_1$.\n4.  A decrease in $M_1$'s drain current causes the voltage at node $X$ to increase (less voltage drop across $R_{D1}$).\n5.  An increase in $v_x$ (which is $v_{gs2}$) causes the drain current of $M_2$ to increase.\n6.  An increase in $M_2$'s drain current causes the output voltage $V_{out}$ to decrease (more voltage drop across $R_{D2}$).\n7.  The decrease in $V_{out}$ pulls current away from the input node through $R_F$, opposing the initial increase in $i_{in}$. This confirms that the feedback is **negative**.\n\n### 3. Quantitative Analysis (Small-Signal)\n*   **Open-Loop Transimpedance Gain ($R_{m,ol}$):**\n    Without the feedback resistor $R_F$ (but accounting for its loading), the gain from $i_{in}$ to $v_{out}$ is approximately:\n    $$R_{m,ol} = \\frac{v_{out}}{i_{in}} \\approx g_{m2} \\cdot R_{D1} \\cdot R_{D2}$$\n    (Assuming $i_{d1} \\approx i_{in}$ and neglecting transistor output resistances $r_o$).\n\n*   **Closed-Loop Transimpedance Gain ($R_{m,f}$):**\n    For a transimpedance amplifier with high loop gain, the closed-loop gain is primarily determined by the feedback resistor:\n    $$R_{m,f} = \\frac{v_{out}}{i_{in}} \\approx -R_F$$\n    The negative sign indicates the phase inversion between the input current and output voltage.\n\n*   **Input and Output Impedances:**\n    *   **Input Impedance ($R_{in,f}$):** The shunt feedback at the input significantly reduces the input impedance. The open-loop input impedance is already low ($\\approx 1/g_{m1}$ due to the CG stage). The feedback reduces it further by a factor of $(1 + \\text{Loop Gain})$, making it an excellent current buffer.\n    *   **Output Impedance ($R_{out,f}$):** The shunt feedback at the output also reduces the output impedance, making the circuit act more like an ideal voltage source at the output.\n\n### 4. Summary of Characteristics\n| Parameter | Characteristic |\n| :--- | :--- |\n| **Amplifier Type** | Transimpedance (Current-to-Voltage) |\n| **Feedback Type** | Shunt-Shunt Negative Feedback |\n| **Gain ($v_{out}/i_{in}$)** | $\\approx -R_F$ |\n| **Input Impedance** | Very Low (improved by CG stage and shunt feedback) |\n| **Output Impedance** | Low (improved by shunt feedback) |\n\n### Applications\nThis circuit is commonly used in high-speed communication systems, such as **optical fiber receivers**, where a photodiode produces a small input current that needs to be converted into a usable voltage signal with high bandwidth and low noise.",
        "format": "markdown",
        "sha256": "b3082f55ce72e8e41d725daac4c5a3af309569dabf6212a4c0faddb85bc5c6c9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input, forming a transimpedance amplifier with negative feedback. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4024,
        "total_tokens": 5117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1093,
        "output_tokens": 4024,
        "total_tokens": 5117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Transimpedance Amplifier (TIA)**, which is designed to convert an input current ($I_{in}$) into an output voltage ($V_{out}$). It utilizes a **shunt-shunt negative feedback** configuration to achieve low input impedance and a stable transimpedance gain.\n\n### 1. Circuit Topology and Components\n*   **$M_1$ (NMOS):** Acts as a high-gain common-gate-like stage. Its gate is biased at a constant voltage $V_b$, and its drain is connected to the output node $V_{out}$.\n*   **$M_2$ (PMOS):** Acts as the feedback element. Its gate is connected to the output $V_{out}$, and its drain is connected back to the input node $V_x$.\n*   **$I_1$:** A constant current source that biases $M_1$ and provides a high-impedance load at the output node, resulting in high open-loop gain.\n*   **$I_{in}$:** The input signal current.\n*   **Downward Current Source:** A bias current source (let's call it $I_B$) that, along with $I_1$, sets the operating points for $M_1$ and $M_2$.\n\n### 2. Principle of Operation\nThe circuit operates through a negative feedback loop:\n1.  If the input current **$I_{in}$ increases**, the voltage at node **$V_x$ tends to rise**.\n2.  As $V_x$ rises, the gate-to-source voltage of $M_1$ ($V_{GS1} = V_b - V_x$) decreases, which **decreases the drain current $I_{D1}$**.\n3.  Since $I_1$ is a constant current source, a decrease in $I_{D1}$ causes the output node **$V_{out}$ to be pulled up** toward $V_{DD}$.\n4.  As $V_{out}$ rises, the source-to-gate voltage of the PMOS $M_2$ ($V_{SG2} = V_{DD} - V_{out}$) decreases, which **decreases its drain current $I_{D2}$**.\n5.  A decrease in $I_{D2}$ (which flows into node $V_x$) counteracts the initial increase in $I_{in}$, completing the negative feedback loop and stabilizing the node voltages.\n\n### 3. Small-Signal Analysis\nAssuming ideal current sources and high output resistance for the transistors:\n*   **Transimpedance Gain ($R_T$):** Because the high-gain stage ($M_1$) tightly regulates the current, the change in input current must be balanced by the change in feedback current: $\\Delta I_{in} \\approx -\\Delta I_{D2}$.\n    For the PMOS $M_2$, the small-signal current is $i_{d2} = -g_{m2} v_{out}$.\n    Substituting this gives: $i_{in} \\approx -(-g_{m2} v_{out}) = g_{m2} v_{out}$.\n    Therefore, the transimpedance gain is:\n    $$R_T = \\frac{v_{out}}{i_{in}} \\approx \\frac{1}{g_{m2}}$$\n\n*   **Input Impedance ($R_{in}$):** The feedback significantly reduces the input impedance at node $V_x$. It can be shown that:\n    $$R_{in} \\approx \\frac{1}{g_{m1} g_{m2} (r_{o1} \\parallel r_{o\\_I1})}$$\n    This extremely low input impedance is a key advantage, as it minimizes the impact of parasitic capacitances at the input, allowing for higher bandwidth.\n\n*   **Output Impedance ($R_{out}$):** Due to the shunt feedback at the output, the output impedance is also low:\n    $$R_{out} \\approx \\frac{1}{g_{m2}}$$\n\n### Summary\nThis circuit is a high-performance **regulated-cascode-style transimpedance amplifier**. Its primary function is to provide a precise current-to-voltage conversion with a gain of approximately **$1/g_{m2}$**, while maintaining a very low input impedance to maximize operating speed.",
        "format": "markdown",
        "sha256": "a2e6f465f3e90acf5e0c4672a23f1777b01da2081ecaa9fae6b1abef745d235e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, describes feedback to the input node, and gives the low input resistance and approximately 1/gm2 transimpedance and output resistance. Minor modeling or terminology imprecision does not affect the essential answer.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 9797,
        "total_tokens": 10885,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 9797,
        "total_tokens": 10885,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis of its operation, components, and key performance characteristics.\n\n### 1. Circuit Identification\nThe circuit is a **Transimpedance Amplifier (TIA)**, also known as a current-to-voltage converter. It utilizes a **regulated cascode** topology with shunt-shunt negative feedback to achieve a very low input impedance and a stable transimpedance gain.\n\n### 2. Component Roles\n*   **$M_1$ (NMOS Transistor):** Acts as a common-gate amplifier stage. Its gate is held at a constant bias voltage $V_b$. It serves as the main path for the signal current to reach the output node.\n*   **$M_2$ (PMOS Transistor):** Acts as the feedback element. Its gate is connected to the output ($V_{out}$) and its drain is connected back to the input node ($V_x$). This provides negative feedback.\n*   **$I_1$ (Current Source):** Serves as an active load for the common-gate stage ($M_1$). In an ideal case, it forces the drain current of $M_1$ to be constant ($I_{D1} = I_1$).\n*   **Bottom Current Source:** Provides the necessary bias current to keep both transistors in their saturation regions.\n*   **$I_{in}$:** The input signal current.\n\n### 3. Qualitative Analysis (Operational Principle)\nThe circuit works through a negative feedback loop that \"regulates\" the voltage at the input node ($V_x$):\n\n1.  **Input Change:** Suppose the input current $I_{in}$ increases. This tends to pull the voltage at node $V_x$ higher.\n2.  **Common-Gate Action:** An increase in $V_x$ reduces the gate-source voltage of $M_1$ ($V_{GS1} = V_b - V_x$). This would normally cause the drain current $I_{D1}$ to decrease.\n3.  **Output Response:** Because the current source $I_1$ is constant, the output voltage $V_{out}$ must increase to compensate for the drop in $V_{GS1}$ (via the channel-length modulation effect, $r_{o1}$).\n4.  **Feedback Action:** The increase in $V_{out}$ is applied to the gate of the PMOS transistor $M_2$. This reduces its source-gate voltage ($V_{SG2} = V_{DD} - V_{out}$), which in turn decreases its drain current $I_{D2}$.\n5.  **Regulation:** The decrease in $I_{D2}$ counteracts the initial increase in $I_{in}$ at node $V_x$, effectively \"clamping\" the voltage $V_x$ and keeping it nearly constant.\n\nThis negative feedback significantly reduces the input impedance, making the circuit an excellent receiver for current-mode signals (such as those from a photodiode).\n\n### 4. Quantitative Analysis (Small-Signal)\nBy applying small-signal analysis, we can derive the key parameters of the circuit:\n\n*   **Transimpedance Gain ($R_m$):**\n    The gain is primarily determined by the feedback transistor $M_2$. For a high-gain common-gate stage, the transimpedance gain is approximately:\n    $$R_m = \\frac{v_{out}}{i_{in}} \\approx \\frac{1}{g_{m2}}$$\n    where $g_{m2}$ is the transconductance of transistor $M_2$.\n\n*   **Input Impedance ($R_{in}$):**\n    Without feedback, the input impedance at the source of $M_1$ would be roughly $1/g_{m1}$. The feedback loop reduces this by the loop gain ($T \\approx g_{m2} \\cdot r_{o1} \\cdot g_{m1} \\cdot \\dots$). The resulting input impedance is extremely low:\n    $$R_{in} \\approx \\frac{1}{g_{m1} \\cdot r_{o1} \\cdot g_{m2}}$$\n    where $r_{o1}$ is the output resistance of $M_1$.\n\n### 5. Summary of Advantages\n*   **Low Input Impedance:** The regulated cascode structure provides a much lower input impedance than a standard common-gate stage, which improves the bandwidth when connected to capacitive current sources.\n*   **Stability:** The gain is well-defined by the transconductance of $M_2$.\n*   **Wide Bandwidth:** Due to the low impedance at the input node, the pole associated with the input capacitance is pushed to a very high frequency.",
        "format": "markdown",
        "sha256": "a7f96e81d46e6ccd2cbc4480e0528e9cb9f8fdac7ad30449b52cbea17236976a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback path, and gives the very low input resistance and transimpedance approximately 1/gm2. The loose “regulated cascode” label does not affect the essential analysis.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 8330,
        "total_tokens": 9418,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7319,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 8330,
        "total_tokens": 9418,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7319,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Transimpedance Amplifier (TIA)**, which is designed to convert an input current ($I_{in}$) into an output voltage ($V_{out}$). It utilizes a **shunt-shunt negative feedback** configuration to achieve low input impedance and a stable transimpedance gain.\n\n### 1. Circuit Topology and Components\n*   **$M_1$ (NMOS):** Acts as a high-gain common-gate-like stage. Its gate is biased at a constant voltage $V_b$, and its drain is connected to the output node $V_{out}$.\n*   **$M_2$ (PMOS):** Acts as the feedback element. Its gate is connected to the output $V_{out}$, and its drain is connected back to the input node $V_x$.\n*   **$I_1$:** A constant current source that biases $M_1$ and provides a high-impedance load at the output node, resulting in high open-loop gain.\n*   **$I_{in}$:** The input signal current.\n*   **Downward Current Source:** A bias current source (let's call it $I_B$) that, along with $I_1$, sets the operating points for $M_1$ and $M_2$.\n\n### 2. Principle of Operation\nThe circuit operates through a negative feedback loop:\n1.  If the input current **$I_{in}$ increases**, the voltage at node **$V_x$ tends to rise**.\n2.  As $V_x$ rises, the gate-to-source voltage of $M_1$ ($V_{GS1} = V_b - V_x$) decreases, which **decreases the drain current $I_{D1}$**.\n3.  Since $I_1$ is a constant current source, a decrease in $I_{D1}$ causes the output node **$V_{out}$ to be pulled up** toward $V_{DD}$.\n4.  As $V_{out}$ rises, the source-to-gate voltage of the PMOS $M_2$ ($V_{SG2} = V_{DD} - V_{out}$) decreases, which **decreases its drain current $I_{D2}$**.\n5.  A decrease in $I_{D2}$ (which flows into node $V_x$) counteracts the initial increase in $I_{in}$, completing the negative feedback loop and stabilizing the node voltages.\n\n### 3. Small-Signal Analysis\nAssuming ideal current sources and high output resistance for the transistors:\n*   **Transimpedance Gain ($R_T$):** Because the high-gain stage ($M_1$) tightly regulates the current, the change in input current must be balanced by the change in feedback current: $\\Delta I_{in} \\approx -\\Delta I_{D2}$.\n    For the PMOS $M_2$, the small-signal current is $i_{d2} = -g_{m2} v_{out}$.\n    Substituting this gives: $i_{in} \\approx -(-g_{m2} v_{out}) = g_{m2} v_{out}$.\n    Therefore, the transimpedance gain is:\n    $$R_T = \\frac{v_{out}}{i_{in}} \\approx \\frac{1}{g_{m2}}$$\n\n*   **Input Impedance ($R_{in}$):** The feedback significantly reduces the input impedance at node $V_x$. It can be shown that:\n    $$R_{in} \\approx \\frac{1}{g_{m1} g_{m2} (r_{o1} \\parallel r_{o\\_I1})}$$\n    This extremely low input impedance is a key advantage, as it minimizes the impact of parasitic capacitances at the input, allowing for higher bandwidth.\n\n*   **Output Impedance ($R_{out}$):** Due to the shunt feedback at the output, the output impedance is also low:\n    $$R_{out} \\approx \\frac{1}{g_{m2}}$$\n\n### Summary\nThis circuit is a high-performance **regulated-cascode-style transimpedance amplifier**. Its primary function is to provide a precise current-to-voltage conversion with a gain of approximately **$1/g_{m2}$**, while maintaining a very low input impedance to maximize operating speed.",
        "format": "markdown",
        "sha256": "a2e6f465f3e90acf5e0c4672a23f1777b01da2081ecaa9fae6b1abef745d235e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, describes feedback to the input node, and gives the low input resistance and approximately 1/gm2 transimpedance and output resistance. Minor modeling or terminology imprecision does not affect the essential answer.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 9797,
        "total_tokens": 10885,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 9797,
        "total_tokens": 10885,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the principles of electronic circuit design, the answer is **no**, the circuit does not fail to oscillate as the capacitors become arbitrarily large.\n\nHere is a detailed explanation:\n\n1.  **Oscillation Condition (Barkhausen Criterion):** For a ring oscillator to oscillate, it must satisfy the Barkhausen criterion, which states that at the frequency of oscillation, the loop gain must have a magnitude of at least 1 and a total phase shift that is a multiple of $360^\\circ$.\n2.  **Small-Signal Analysis:** A single stage of the inverter can be modeled as having a low-frequency gain $A_0 = g_m R_{out}$ and a pole at $\\omega_p = 1 / (R_{out} C_L)$. The transfer function for one stage is:\n    $$H(s) = \\frac{-A_0}{1 + \\frac{s}{\\omega_p}}$$\n3.  **Loop Gain:** For a 3-stage ring, the total loop gain is $L(s) = [H(s)]^3$. To achieve a total phase shift of $360^\\circ$ (or $0^\\circ$), each of the three inverting stages (which already provide $180^\\circ$ of phase shift at DC) must contribute an additional $60^\\circ$ of phase shift from their poles.\n    *   This occurs at a frequency $\\omega_{osc}$ where $\\tan^{-1}(\\omega_{osc} / \\omega_p) = 60^\\circ$, which means $\\omega_{osc} = \\sqrt{3} \\omega_p = \\frac{\\sqrt{3}}{R_{out} C_L}$.\n4.  **Gain Requirement:** At this oscillation frequency, the magnitude of the gain for each stage is:\n    $$|H(j\\omega_{osc})| = \\frac{A_0}{\\sqrt{1 + (\\sqrt{3})^2}} = \\frac{A_0}{2}$$\n    For the total loop gain magnitude to be $\\ge 1$, we need $(A_0 / 2)^3 \\ge 1$, which simplifies to **$A_0 \\ge 2$**.\n5.  **Independence from $C_L$:** Notice that the condition for oscillation ($A_0 \\ge 2$) depends only on the transconductance ($g_m$) and output resistance ($R_{out}$) of the inverters, not on the load capacitance $C_L$. \n\n**Conclusion:**\nAs the capacitors $C_L$ become arbitrarily large, the oscillation frequency $\\omega_{osc}$ will decrease toward zero, but the circuit will continue to oscillate as long as the inverters provide enough gain ($A_0 \\ge 2$). In a practical sense, the circuit just becomes a very slow oscillator.",
        "format": "markdown",
        "sha256": "4cf985a5df5591babfb5a74a04d8db94ba5bb535fa2d7504172239c5a13ac963"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency and gives the small-signal phase and gain conditions, showing the oscillation condition is independent of the equal capacitors.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 2939,
        "total_tokens": 4048,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2333,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 2939,
        "total_tokens": 4048,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2333,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the principles of feedback systems and circuit analysis, the answer is **no, the circuit does not fail to oscillate** as the capacitors become arbitrarily large.\n\nHere is a detailed explanation of why:\n\n### 1. Small-Signal Analysis (Barkhausen Criteria)\nTo determine if a circuit will oscillate, we look at its loop transfer function, $H(s)$. For a three-stage ring oscillator where each inverter has a DC gain of $-A_0$ and an output resistance $R_o$, the transfer function of a single stage is:\n$$A(s) = \\frac{-A_0}{1 + s R_o C_L}$$\nThe loop transfer function for the three identical stages is:\n$$H(s) = [A(s)]^3 = \\frac{-A_0^3}{(1 + s R_o C_L)^3}$$\n\nFor oscillation to occur at a frequency $\\omega_0$, two conditions must be met:\n*   **Phase Condition:** The total phase shift around the loop must be $360^\\circ$ (or $0^\\circ$). The three inverters provide a base phase shift of $180^\\circ \\times 3 = 540^\\circ$ (equivalent to $180^\\circ$). The three poles must provide the remaining $180^\\circ$ shift. Thus, each pole must contribute $180^\\circ / 3 = 60^\\circ$.\n    $$\\arctan(\\omega_0 R_o C_L) = 60^\\circ \\implies \\omega_0 R_o C_L = \\tan(60^\\circ) = \\sqrt{3}$$\n    This gives an oscillation frequency of: **$\\omega_0 = \\frac{\\sqrt{3}}{R_o C_L}$**.\n*   **Gain Condition:** The magnitude of the loop gain at $\\omega_0$ must be at least 1.\n    $$|H(j\\omega_0)| = \\frac{A_0^3}{|1 + j\\sqrt{3}|^3} = \\frac{A_0^3}{( \\sqrt{1^2 + (\\sqrt{3})^2} )^3} = \\frac{A_0^3}{2^3} = \\frac{A_0^3}{8}$$\n    For oscillation to start, we need $\\frac{A_0^3}{8} \\geq 1$, which means **$A_0 \\geq 2$**.\n\n### 2. Effect of Arbitrarily Large $C_L$\nNotice that the condition for oscillation ($A_0 \\geq 2$) depends only on the DC gain of the inverters, which is determined by their transconductance ($g_m$) and output resistance ($R_o$). **It does not depend on the load capacitance $C_L$.**\n\nAs $C_L$ becomes arbitrarily large:\n*   The oscillation frequency $\\omega_0$ approaches zero (the circuit oscillates slower and slower).\n*   The loop gain at the oscillation frequency remains constant at $A_0^3 / 8$.\n\n### Conclusion\nAs long as the inverters have sufficient DC gain ($A_0 \\geq 2$), the circuit will continue to oscillate regardless of how large the capacitors are. The only change is that the **frequency of oscillation will decrease** proportionally to $1/C_L$. In a practical sense, the transitions would become extremely slow, but theoretically, the oscillation does not \"fail.\"",
        "format": "markdown",
        "sha256": "c95ac4b8b18ab7e8d63e2abf404012d570d24febb282fc6813ab1275b3b5a8cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three added capacitors slow the ring without stopping oscillation. The small-signal phase and gain analysis shows the frequency scales as 1/CL while the oscillation condition is independent of CL.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 2674,
        "total_tokens": 3783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1919,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 2674,
        "total_tokens": 3783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1919,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the standard linear and large-signal models of a ring oscillator, the answer is **no**, the circuit does not fail to oscillate as the capacitors $C_L$ become arbitrarily large.\n\nHere is a detailed explanation:\n\n### 1. Linear Analysis (Barkhausen Stability Criterion)\nTo determine if a circuit will oscillate, we look at its loop gain. For a three-stage ring oscillator, each stage can be modeled as an inverter with a DC gain $A_0$ and an output pole determined by the load capacitance $C_L$ and the output resistance $R_{out}$. The transfer function of one stage is:\n$$H(s) = \\frac{-A_0}{1 + \\frac{s}{\\omega_p}}$$\nwhere $\\omega_p = \\frac{1}{R_{out} C_L}$ is the pole frequency.\n\nThe total loop gain for three identical stages is:\n$$L(s) = [H(s)]^3 = \\frac{-A_0^3}{(1 + \\frac{s}{\\omega_p})^3}$$\n\nFor oscillation to occur, the loop must provide a total phase shift of $360^\\circ$ (or $0^\\circ$) at a frequency where the gain magnitude is at least 1. Since the three inverters already provide $180^\\circ$ of phase shift at DC, the three poles must contribute an additional $180^\\circ$ at the oscillation frequency $\\omega_{osc}$.\n*   Each pole contributes $60^\\circ$ of phase shift: $\\arctan(\\frac{\\omega_{osc}}{\\omega_p}) = 60^\\circ \\Rightarrow \\frac{\\omega_{osc}}{\\omega_p} = \\sqrt{3}$.\n*   The oscillation frequency is therefore $\\omega_{osc} = \\sqrt{3} \\omega_p = \\frac{\\sqrt{3}}{R_{out} C_L}$.\n\nAt this frequency, the magnitude of the loop gain is:\n$$|L(j\\omega_{osc})| = \\frac{A_0^3}{|1 + j\\sqrt{3}|^3} = \\frac{A_0^3}{(1+3)^{3/2}} = \\frac{A_0^3}{8}$$\n\nThe condition for oscillation is $|L(j\\omega_{osc})| \\ge 1$, which simplifies to **$A_0 \\ge 2$**.\n\n### 2. Effect of Large Capacitance\nNotice that the condition for oscillation ($A_0 \\ge 2$) depends only on the DC gain of the inverters and is **independent of the load capacitance $C_L$**. \n*   As $C_L$ becomes arbitrarily large, the pole frequency $\\omega_p$ approaches zero.\n*   Consequently, the oscillation frequency $\\omega_{osc}$ also approaches zero.\n*   However, as long as the inverters provide a DC gain of at least 2, the circuit will continue to satisfy the oscillation criteria.\n\n### 3. Large-Signal Perspective\nIn a practical digital implementation, each inverter acts as a current source charging or discharging the next stage's capacitor. The time it takes for a node to transition from one logic level to the switching threshold is proportional to $C_L$ ($t \\approx \\frac{C_L \\cdot \\Delta V}{I}$). While an \"arbitrarily large\" $C_L$ will result in an arbitrarily long period (and thus an arbitrarily low frequency), the circuit will still eventually switch states and complete its cycle.\n\n**Conclusion:** The circuit will continue to oscillate regardless of how large $C_L$ is, provided the inverters have sufficient gain. It simply oscillates at a lower and lower frequency as $C_L$ increases.",
        "format": "markdown",
        "sha256": "4164d22c5c10c0f9d7d82172fe09cb8d6c4280a1f6536c0ff47fe4852300d367"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency. Its small-signal analysis correctly shows that increasing all three capacitors lowers the pole and oscillation frequencies without changing the required per-stage gain condition.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 3290,
        "total_tokens": 4399,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2487,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1109,
        "output_tokens": 3290,
        "total_tokens": 4399,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2487,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the principles of ring oscillator design, here is what happens to the phase noise if the three load capacitors ($C_L$) are doubled:\n\n### 1. Effect on Oscillation Frequency\nThe oscillation frequency ($f_0$) of a ring oscillator is inversely proportional to the delay of each stage. The delay is directly proportional to the load capacitance $C_L$. Therefore, if you double the capacitance, the oscillation frequency will be halved:\n$$f_0 \\propto \\frac{1}{C_L}$$\nSo, $f_{new} = \\frac{1}{2} f_{old}$.\n\n### 2. Effect on Power Consumption\nThe dynamic power consumption ($P$) of a CMOS ring oscillator is given by:\n$$P = N \\cdot C_L \\cdot V_{DD}^2 \\cdot f_0$$\nwhere $N$ is the number of stages. Since $f_0$ is inversely proportional to $C_L$, the product $C_L \\cdot f_0$ remains constant. Thus, the total power consumption of the circuit remains approximately the same.\n\n### 3. Effect on Phase Noise\nThe phase noise $\\mathcal{L}(\\Delta f)$ at a specific frequency offset $\\Delta f$ from the carrier for a ring oscillator can be expressed as:\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{k T}{P} \\cdot \\frac{f_0^2}{\\Delta f^2}$$\nSince the power $P$ remains constant and the oscillation frequency $f_0$ is halved:\n*   The term $f_0^2$ becomes $(f_0/2)^2 = \\frac{1}{4} f_0^2$.\n*   This results in the phase noise decreasing by a factor of 4.\n\n### Conclusion\nIf the three capacitors are doubled, the **phase noise will decrease by 6 dB** (a factor of 4) at a given offset frequency, primarily because the oscillation frequency has been halved while the power consumption remains constant.",
        "format": "markdown",
        "sha256": "2ce9ef869cf0e6bea140c56db25fc984023358ad5c74dc068d11ca97494ec6cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and that phase noise falls by a factor of four (about 6 dB) at a fixed offset, matching the golden solution.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 3733,
        "total_tokens": 4841,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3301,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 3733,
        "total_tokens": 4841,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3301,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram, which represents a **3-stage ring oscillator**, here is what happens to the phase noise if the three load capacitors ($C_L$) are doubled:\n\n### 1. Effect on Oscillation Frequency\nThe oscillation frequency ($f_{osc}$) of a ring oscillator is inversely proportional to the delay of each stage. The delay ($\\tau$) is directly proportional to the load capacitance ($C_L$):\n$$\\tau \\propto C_L$$\n$$f_{osc} = \\frac{1}{2 \\cdot N \\cdot \\tau} \\propto \\frac{1}{C_L}$$\nIf the capacitors are doubled ($2 \\times C_L$), the delay per stage doubles, and the **oscillation frequency is halved** ($f_{osc} \\rightarrow f_{osc}/2$).\n\n### 2. Effect on Phase Noise\nPhase noise ($\\mathcal{L}$) in a ring oscillator at a fixed offset frequency ($\\Delta f$) can be modeled by the following relationship (assuming fixed transistor sizes and supply voltage):\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{f_{osc}^2}{P \\cdot \\Delta f^2}$$\nWhere $P$ is the power consumption. In a typical CMOS ring oscillator, the average current drawn from the supply is independent of the load capacitance (because while each cycle draws more charge, there are fewer cycles per second). Thus, the power $P$ remains roughly constant.\n\nSince $f_{osc} \\propto 1/C_L$, we can see that:\n$$\\mathcal{L}(\\Delta f) \\propto f_{osc}^2 \\propto \\left(\\frac{1}{C_L}\\right)^2 = \\frac{1}{C_L^2}$$\n\n### Conclusion\nIf the three capacitors are doubled:\n*   The phase noise power decreases by a factor of **4**.\n*   In decibels, this corresponds to a **6 dB reduction** in phase noise (i.e., the phase noise improves by 6 dB).\n\n**Summary:** Doubling the capacitors halves the operating frequency and **decreases the phase noise by 6 dB**.",
        "format": "markdown",
        "sha256": "86cfe1439f36bcbac7f3967ed7e687375f565c6c47a86dfe14e8010c07032a34"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about a factor of four (6 dB) at a fixed offset, as required.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 5150,
        "total_tokens": 6258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 5150,
        "total_tokens": 6258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram, which represents a **3-stage ring oscillator**, here is what happens to the phase noise if the three load capacitors ($C_L$) are doubled:\n\n### 1. Effect on Oscillation Frequency\nThe oscillation frequency ($f_{osc}$) of a ring oscillator is inversely proportional to the delay of each stage. The delay ($\\tau$) is directly proportional to the load capacitance ($C_L$):\n$$\\tau \\propto C_L$$\n$$f_{osc} = \\frac{1}{2 \\cdot N \\cdot \\tau} \\propto \\frac{1}{C_L}$$\nIf the capacitors are doubled ($2 \\times C_L$), the delay per stage doubles, and the **oscillation frequency is halved** ($f_{osc} \\rightarrow f_{osc}/2$).\n\n### 2. Effect on Phase Noise\nPhase noise ($\\mathcal{L}$) in a ring oscillator at a fixed offset frequency ($\\Delta f$) can be modeled by the following relationship (assuming fixed transistor sizes and supply voltage):\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{f_{osc}^2}{P \\cdot \\Delta f^2}$$\nWhere $P$ is the power consumption. In a typical CMOS ring oscillator, the average current drawn from the supply is independent of the load capacitance (because while each cycle draws more charge, there are fewer cycles per second). Thus, the power $P$ remains roughly constant.\n\nSince $f_{osc} \\propto 1/C_L$, we can see that:\n$$\\mathcal{L}(\\Delta f) \\propto f_{osc}^2 \\propto \\left(\\frac{1}{C_L}\\right)^2 = \\frac{1}{C_L^2}$$\n\n### Conclusion\nIf the three capacitors are doubled:\n*   The phase noise power decreases by a factor of **4**.\n*   In decibels, this corresponds to a **6 dB reduction** in phase noise (i.e., the phase noise improves by 6 dB).\n\n**Summary:** Doubling the capacitors halves the operating frequency and **decreases the phase noise by 6 dB**.",
        "format": "markdown",
        "sha256": "86cfe1439f36bcbac7f3967ed7e687375f565c6c47a86dfe14e8010c07032a34"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about a factor of four (6 dB) at a fixed offset, as required.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 5150,
        "total_tokens": 6258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1108,
        "output_tokens": 5150,
        "total_tokens": 6258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit will fail to oscillate if $C_L$ becomes arbitrarily large.**\n\nHere is the technical explanation based on the Barkhausen stability criterion for oscillators:\n\n1.  **Phase Shift Requirement:** For a three-stage ring oscillator to oscillate, the total phase shift around the loop must be $360^\\circ$ (or $2\\pi$ radians). Since there are three inverting stages, they provide a combined $180^\\circ$ phase shift at DC. Therefore, the frequency-dependent poles of the three stages must contribute an additional $180^\\circ$ of phase shift at the oscillation frequency ($\\omega_{osc}$).\n    $$\\phi_{poles}(\\omega_{osc}) = \\arctan\\left(\\frac{\\omega_{osc}}{\\omega_{p1}}\\right) + \\arctan\\left(\\frac{\\omega_{osc}}{\\omega_{p2}}\\right) + \\arctan\\left(\\frac{\\omega_{osc}}{\\omega_{p3}}\\right) = 180^\\circ$$\n\n2.  **Effect of $C_L$ on the Pole:** The capacitor $C_L$ creates a pole at the output of the first inverter: $\\omega_{p1} = 1 / (R_{out1} \\cdot C_L)$. As $C_L$ becomes arbitrarily large, this pole frequency $\\omega_{p1}$ approaches zero.\n\n3.  **Oscillation Frequency:** As $\\omega_{p1} \\to 0$, the first stage contributes nearly $90^\\circ$ of phase shift for even very small frequencies. To reach the required $180^\\circ$ total, the other two stages must contribute the remaining $90^\\circ$. This forces the oscillation frequency $\\omega_{osc}$ to stay at a relatively high value determined by the poles of the other two inverters ($\\omega_{p2}$ and $\\omega_{p3}$).\n\n4.  **Loop Gain Requirement:** The second part of the Barkhausen criterion is that the loop gain magnitude must be at least 1 at $\\omega_{osc}$. The gain of the first stage at high frequencies is approximately:\n    $$|A_1(j\\omega_{osc})| \\approx \\frac{g_{m1}}{\\omega_{osc} C_L}$$\n    As $C_L$ increases toward infinity, the gain of this stage approaches zero. Eventually, the total loop gain ($|A_1| \\cdot |A_2| \\cdot |A_3|$) will drop below 1. Once the loop gain is less than unity, the circuit can no longer sustain oscillations and will settle into a stable state.",
        "format": "markdown",
        "sha256": "cd300e3043646bc67325b43a0ce2443bbd373a578c3fa9d37fc054b72b11f1b2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large one-node loading can stop oscillation and explains that the resulting low pole causes gain roll-off until loop gain is insufficient at the phase condition. Its approximate phase and gain discussion is consistent with the essential result.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 4168,
        "total_tokens": 5275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 4168,
        "total_tokens": 5275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit will fail to oscillate if $C_L$ becomes arbitrarily large.**\n\nHere is the technical explanation based on the Barkhausen stability criterion for oscillators:\n\n1.  **Phase Shift Requirement:** For a three-stage ring oscillator to oscillate, the total phase shift around the loop must be $360^\\circ$ (or $2\\pi$ radians). Since there are three inverting stages, they provide a combined $180^\\circ$ phase shift at DC. Therefore, the frequency-dependent poles of the three stages must contribute an additional $180^\\circ$ of phase shift at the oscillation frequency ($\\omega_{osc}$).\n    $$\\phi_{poles}(\\omega_{osc}) = \\arctan\\left(\\frac{\\omega_{osc}}{\\omega_{p1}}\\right) + \\arctan\\left(\\frac{\\omega_{osc}}{\\omega_{p2}}\\right) + \\arctan\\left(\\frac{\\omega_{osc}}{\\omega_{p3}}\\right) = 180^\\circ$$\n\n2.  **Effect of $C_L$ on the Pole:** The capacitor $C_L$ creates a pole at the output of the first inverter: $\\omega_{p1} = 1 / (R_{out1} \\cdot C_L)$. As $C_L$ becomes arbitrarily large, this pole frequency $\\omega_{p1}$ approaches zero.\n\n3.  **Oscillation Frequency:** As $\\omega_{p1} \\to 0$, the first stage contributes nearly $90^\\circ$ of phase shift for even very small frequencies. To reach the required $180^\\circ$ total, the other two stages must contribute the remaining $90^\\circ$. This forces the oscillation frequency $\\omega_{osc}$ to stay at a relatively high value determined by the poles of the other two inverters ($\\omega_{p2}$ and $\\omega_{p3}$).\n\n4.  **Loop Gain Requirement:** The second part of the Barkhausen criterion is that the loop gain magnitude must be at least 1 at $\\omega_{osc}$. The gain of the first stage at high frequencies is approximately:\n    $$|A_1(j\\omega_{osc})| \\approx \\frac{g_{m1}}{\\omega_{osc} C_L}$$\n    As $C_L$ increases toward infinity, the gain of this stage approaches zero. Eventually, the total loop gain ($|A_1| \\cdot |A_2| \\cdot |A_3|$) will drop below 1. Once the loop gain is less than unity, the circuit can no longer sustain oscillations and will settle into a stable state.",
        "format": "markdown",
        "sha256": "cd300e3043646bc67325b43a0ce2443bbd373a578c3fa9d37fc054b72b11f1b2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large one-node loading can stop oscillation and explains that the resulting low pole causes gain roll-off until loop gain is insufficient at the phase condition. Its approximate phase and gain discussion is consistent with the essential result.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 4168,
        "total_tokens": 5275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 4168,
        "total_tokens": 5275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit will fail to oscillate if $C_L$ becomes arbitrarily large.**\n\nHere is a technical explanation of why this happens based on the Barkhausen stability criterion:\n\n1.  **Loop Gain and Phase:** For a ring oscillator to sustain oscillation, the total loop gain must have a magnitude of at least 1 at the frequency where the total phase shift is $360^\\circ$ (or $180^\\circ$ of frequency-dependent phase shift plus the $180^\\circ$ from the odd number of inversions).\n2.  **The Effect of $C_L$:** The capacitor $C_L$ at the output of the first inverter creates a low-pass pole at a frequency $\\omega_{p1} \\approx 1 / (R_{out} C_L)$, where $R_{out}$ is the output resistance of the inverter. As $C_L$ becomes arbitrarily large, this pole frequency $\\omega_{p1}$ moves closer and closer to zero.\n3.  **Phase Shift Requirement:** In a 3-stage ring oscillator, each stage typically contributes $60^\\circ$ of phase shift at the oscillation frequency $\\omega_{osc}$. If $\\omega_{p1}$ becomes very small due to a large $C_L$, the first stage will contribute nearly $90^\\circ$ of phase shift even at very low frequencies. To reach the required $180^\\circ$ total frequency-dependent phase shift, the other two stages must provide the remaining $90^\\circ$ (roughly $45^\\circ$ each). This forces the oscillation frequency $\\omega_{osc}$ to stay relatively high, near the pole frequencies of the other two stages.\n4.  **Gain Attenuation:** The gain magnitude of the first stage is given by $|H_1(j\\omega)| = \\frac{A_v}{\\sqrt{1 + (\\omega/\\omega_{p1})^2}}$. As $C_L \\to \\infty$ (and thus $\\omega_{p1} \\to 0$), the gain of this stage at the required oscillation frequency $\\omega_{osc}$ drops toward zero.\n5.  **Failure to Oscillate:** Eventually, the total loop gain magnitude ($|H_1| \\cdot |H_2| \\cdot |H_3|$) will fall below unity. Once the loop gain is less than 1, the circuit can no longer sustain oscillations, and it will settle into a stable DC state.\n\nIn practical terms, the first inverter simply cannot charge and discharge the massive capacitor $C_L$ fast enough to keep up with the other stages, \"stalling\" the loop.",
        "format": "markdown",
        "sha256": "5380ce9893b5471ffa64adc2a8f6dc6c30f75dd4aeb3f86583ff7dfa3322c7ab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large one-node loading creates a dominant pole and reduces loop gain until oscillation fails. The phase-shift details are approximate and secondary.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 2454,
        "total_tokens": 3561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1892,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 2454,
        "total_tokens": 3561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1892,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram, which shows a **3-stage CMOS ring oscillator**, here is what happens to the phase noise if you double the widths ($W$) of all NMOS and PMOS devices:\n\n### **The phase noise decreases by 3 dB.**\n\nHere is the technical explanation for why this happens:\n\n1.  **Power Consumption:** When you double the width of the transistors, the current ($I$) flowing through them doubles. Since the supply voltage ($V_{DD}$) remains the same, the power consumption ($P$) of the oscillator doubles.\n2.  **Capacitance:** Doubling the width also doubles the parasitic capacitances ($C$) at each node (gate and drain capacitances).\n3.  **Oscillation Frequency:** The frequency of a ring oscillator is roughly proportional to $I/C$. Since both the current and the capacitance have doubled, the oscillation frequency remains approximately the same.\n4.  **Phase Noise Relationship:** In a ring oscillator, the phase noise $\\mathcal{L}(\\Delta\\omega)$ at a given offset frequency is inversely proportional to the power dissipation (or the energy stored in the oscillating nodes). \n    *   Mathematically: $\\mathcal{L}(\\Delta\\omega) \\propto \\frac{1}{P}$\n    *   Because the power $P$ has doubled, the phase noise power is halved.\n    *   A factor of 2 reduction in noise power corresponds to a **3 dB decrease** in phase noise.\n\n**Summary:** By doubling the device widths, you are essentially putting two identical oscillators in parallel. This increases the \"signal\" energy relative to the \"noise\" energy, resulting in a 3 dB improvement in phase noise at the cost of doubling the power consumption.",
        "format": "markdown",
        "sha256": "ee17a04a092f44fde1ae397b18d7f35615dd22f9c9cb0fcecbcd73f2d48fe632"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and supports it with the valid current/capacitance scaling and parallel-rings interpretation; the doubled power cost is also noted.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 1272,
        "total_tokens": 2388,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 911,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 1272,
        "total_tokens": 2388,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 911,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram, which shows a **3-stage CMOS ring oscillator**, here is what happens to the phase noise if you double the widths ($W$) of all NMOS and PMOS devices:\n\n### **The phase noise decreases by 3 dB.**\n\nHere is the technical explanation for why this happens:\n\n1.  **Power Consumption:** When you double the width of the transistors, the current ($I$) flowing through them doubles. Since the supply voltage ($V_{DD}$) remains the same, the power consumption ($P$) of the oscillator doubles.\n2.  **Capacitance:** Doubling the width also doubles the parasitic capacitances ($C$) at each node (gate and drain capacitances).\n3.  **Oscillation Frequency:** The frequency of a ring oscillator is roughly proportional to $I/C$. Since both the current and the capacitance have doubled, the oscillation frequency remains approximately the same.\n4.  **Phase Noise Relationship:** In a ring oscillator, the phase noise $\\mathcal{L}(\\Delta\\omega)$ at a given offset frequency is inversely proportional to the power dissipation (or the energy stored in the oscillating nodes). \n    *   Mathematically: $\\mathcal{L}(\\Delta\\omega) \\propto \\frac{1}{P}$\n    *   Because the power $P$ has doubled, the phase noise power is halved.\n    *   A factor of 2 reduction in noise power corresponds to a **3 dB decrease** in phase noise.\n\n**Summary:** By doubling the device widths, you are essentially putting two identical oscillators in parallel. This increases the \"signal\" energy relative to the \"noise\" energy, resulting in a 3 dB improvement in phase noise at the cost of doubling the power consumption.",
        "format": "markdown",
        "sha256": "ee17a04a092f44fde1ae397b18d7f35615dd22f9c9cb0fcecbcd73f2d48fe632"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and supports it with the valid current/capacitance scaling and parallel-rings interpretation; the doubled power cost is also noted.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 1272,
        "total_tokens": 2388,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 911,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 1272,
        "total_tokens": 2388,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 911,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the principles of oscillator design, here is what happens to the phase noise if you double the widths ($W$) of all NMOS and PMOS devices in this 3-stage ring oscillator:\n\n### 1. Effect on Circuit Parameters\n*   **Capacitance ($C$):** The parasitic capacitances (gate and drain capacitances) at each node are proportional to the width of the transistors. Therefore, doubling the widths will approximately **double the total capacitance** at each node ($C \\to 2C$).\n*   **Current ($I$):** The drive current of the transistors in saturation is also proportional to the width. Doubling the widths will **double the available current** to charge and discharge those nodes ($I \\to 2I$).\n*   **Oscillation Frequency ($f_0$):** The delay of each inverter stage is roughly $\\tau \\approx \\frac{C \\cdot \\Delta V}{I}$. Since both $C$ and $I$ have doubled, the delay $\\tau$ remains approximately the same. Consequently, the oscillation frequency $f_0$ remains **constant**.\n*   **Power Consumption ($P$):** Power in a CMOS ring oscillator is $P = f_0 \\cdot C_{total} \\cdot V_{DD}^2$. Since the frequency is constant but the capacitance has doubled, the **power consumption doubles** ($P \\to 2P$).\n\n### 2. Effect on Phase Noise\nPhase noise ($\\mathcal{L}$) in an oscillator is inversely proportional to the power consumption for a fixed oscillation frequency. This can be understood through the Impulse Sensitivity Function (ISF) framework:\n*   The noise power spectral density (thermal noise) of the transistors increases by a factor of 2 because the transconductance ($g_m$) doubles.\n*   However, the maximum charge stored on the nodes ($q_{max} = C \\cdot V_{swing}$) also doubles.\n*   Phase noise is proportional to $\\frac{\\text{Noise Power}}{q_{max}^2}$.\n*   Substituting the changes: $\\mathcal{L} \\propto \\frac{2 \\times \\text{Noise Power}}{(2 \\times q_{max})^2} = \\frac{2}{4} = \\frac{1}{2}$ of the original phase noise.\n\n### Conclusion\nDoubling the widths of the devices **decreases the phase noise by 3 dB** (it is halved). \n\nIn practical terms, you are trading off power for better noise performance: by consuming twice as much power, you achieve a 3 dB improvement in phase noise while maintaining the same operating frequency.",
        "format": "markdown",
        "sha256": "902605d7525e94480d18adbe43720f13954966736ac85364d505bf93b177698a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts a 3 dB phase-noise reduction and supports it with the valid scaling: device noise power doubles while node charge doubles, giving half the noise-to-signal ratio. The frequency and power trends are also consistent with the golden solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 1643,
        "total_tokens": 2759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 1643,
        "total_tokens": 2759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_x$ looking into the supply node of the 3-stage ring oscillator, we can analyze the circuit by considering a single inverter stage and then combining the results for all three stages.\n\n### 1. Small-Signal Model of a Single Inverter Stage\nA CMOS inverter consists of a PMOS transistor (top) and an NMOS transistor (bottom). Let $v_x$ be a small-signal voltage applied at the common supply node and $i_{x,1}$ be the small-signal current drawn by one inverter stage from this node.\n\nFor the **PMOS transistor**:\n*   The source is connected to the supply node: $v_{s,p} = v_x$.\n*   The gate is connected to the input node: $v_{g,p} = v_{in}$.\n*   The drain is connected to the output node: $v_{d,p} = v_{out}$.\n*   The small-signal current from source to drain is $i_{sd,p} = g_{mp}(v_{s,p} - v_{g,p}) + \\frac{v_{s,p} - v_{d,p}}{r_{op}} = g_{mp}(v_x - v_{in}) + \\frac{v_x - v_{out}}{r_{op}}$.\n\nFor the **NMOS transistor**:\n*   The source is grounded: $v_{s,n} = 0$.\n*   The gate is connected to the input node: $v_{g,n} = v_{in}$.\n*   The drain is connected to the output node: $v_{d,n} = v_{out}$.\n*   The small-signal current from drain to source is $i_{ds,n} = g_{mn}v_{in} + \\frac{v_{out}}{r_{on}}$.\n\n### 2. Analysis at the DC Operating Point\nIn a ring oscillator, the small-signal resistance is typically evaluated at the DC operating point where all nodes are at the switching threshold. By symmetry, a change in the supply voltage $v_x$ will cause an identical change in all node voltages. Thus, for each stage, we can assume $v_{in} = v_{out} = v$.\n\nApplying Kirchhoff's Current Law (KCL) at the output node of one inverter (assuming no external load):\n$$i_{sd,p} = i_{ds,n}$$\n$$g_{mp}(v_x - v) + \\frac{v_x - v}{r_{op}} = g_{mn}v + \\frac{v}{r_{on}}$$\nLet $g_p = g_{mp} + \\frac{1}{r_{op}}$ and $g_n = g_{mn} + \\frac{1}{r_{on}}$. The equation simplifies to:\n$$g_p(v_x - v) = g_n v$$\nSolving for $v$:\n$$v = \\frac{g_p}{g_n + g_p} v_x$$\n\n### 3. Calculating the Total Resistance $R_x$\nThe current drawn from the supply by one stage is:\n$$i_{x,1} = i_{sd,p} = g_p(v_x - v) = g_p \\left( v_x - \\frac{g_p}{g_n + g_p} v_x \\right) = \\frac{g_p g_n}{g_n + g_p} v_x$$\nThe resistance of a single stage seen from the supply is:\n$$R_{x,1} = \\frac{v_x}{i_{x,1}} = \\frac{g_n + g_p}{g_n g_p} = \\frac{1}{g_n} + \\frac{1}{g_p}$$\nSince there are 3 identical stages connected in parallel to the same supply node, the total resistance $R_x$ is:\n$$R_x = \\frac{1}{3} R_{x,1} = \\frac{1}{3} \\left( \\frac{1}{g_n} + \\frac{1}{g_p} \\right)$$\nSubstituting back the full expressions for $g_n$ and $g_p$:\n$$R_x = \\frac{1}{3} \\left( \\frac{1}{g_{mn} + r_{on}^{-1}} + \\frac{1}{g_{mp} + r_{op}^{-1}} \\right)$$\nIf we assume the output resistances $r_o$ are very large ($r_o \\to \\infty$), the expression simplifies to:\n$$R_x \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)$$",
        "format": "markdown",
        "sha256": "6790182c751b3a7d7600b4fb7ad14882d7d3fc858c7ce607d956e89151dca77f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a plausible static, symmetry-based gm resistance, but ignores the oscillation-driven charging and discharging of the node capacitances, which sets the resistance in this question.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 8652,
        "total_tokens": 9764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 8652,
        "total_tokens": 9764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_x$ looking into the supply node of the 3-stage ring oscillator, we can analyze the circuit by considering a single inverter stage and then combining the results for all three stages.\n\n### 1. Small-Signal Model of a Single Inverter Stage\nA CMOS inverter consists of a PMOS transistor (top) and an NMOS transistor (bottom). Let $v_x$ be a small-signal voltage applied at the common supply node and $i_{x,1}$ be the small-signal current drawn by one inverter stage from this node.\n\nFor the **PMOS transistor**:\n*   The source is connected to the supply node: $v_{s,p} = v_x$.\n*   The gate is connected to the input node: $v_{g,p} = v_{in}$.\n*   The drain is connected to the output node: $v_{d,p} = v_{out}$.\n*   The small-signal current from source to drain is $i_{sd,p} = g_{mp}(v_{s,p} - v_{g,p}) + \\frac{v_{s,p} - v_{d,p}}{r_{op}} = g_{mp}(v_x - v_{in}) + \\frac{v_x - v_{out}}{r_{op}}$.\n\nFor the **NMOS transistor**:\n*   The source is grounded: $v_{s,n} = 0$.\n*   The gate is connected to the input node: $v_{g,n} = v_{in}$.\n*   The drain is connected to the output node: $v_{d,n} = v_{out}$.\n*   The small-signal current from drain to source is $i_{ds,n} = g_{mn}v_{in} + \\frac{v_{out}}{r_{on}}$.\n\n### 2. Analysis at the DC Operating Point\nIn a ring oscillator, the small-signal resistance is typically evaluated at the DC operating point where all nodes are at the switching threshold. By symmetry, a change in the supply voltage $v_x$ will cause an identical change in all node voltages. Thus, for each stage, we can assume $v_{in} = v_{out} = v$.\n\nApplying Kirchhoff's Current Law (KCL) at the output node of one inverter (assuming no external load):\n$$i_{sd,p} = i_{ds,n}$$\n$$g_{mp}(v_x - v) + \\frac{v_x - v}{r_{op}} = g_{mn}v + \\frac{v}{r_{on}}$$\nLet $g_p = g_{mp} + \\frac{1}{r_{op}}$ and $g_n = g_{mn} + \\frac{1}{r_{on}}$. The equation simplifies to:\n$$g_p(v_x - v) = g_n v$$\nSolving for $v$:\n$$v = \\frac{g_p}{g_n + g_p} v_x$$\n\n### 3. Calculating the Total Resistance $R_x$\nThe current drawn from the supply by one stage is:\n$$i_{x,1} = i_{sd,p} = g_p(v_x - v) = g_p \\left( v_x - \\frac{g_p}{g_n + g_p} v_x \\right) = \\frac{g_p g_n}{g_n + g_p} v_x$$\nThe resistance of a single stage seen from the supply is:\n$$R_{x,1} = \\frac{v_x}{i_{x,1}} = \\frac{g_n + g_p}{g_n g_p} = \\frac{1}{g_n} + \\frac{1}{g_p}$$\nSince there are 3 identical stages connected in parallel to the same supply node, the total resistance $R_x$ is:\n$$R_x = \\frac{1}{3} R_{x,1} = \\frac{1}{3} \\left( \\frac{1}{g_n} + \\frac{1}{g_p} \\right)$$\nSubstituting back the full expressions for $g_n$ and $g_p$:\n$$R_x = \\frac{1}{3} \\left( \\frac{1}{g_{mn} + r_{on}^{-1}} + \\frac{1}{g_{mp} + r_{op}^{-1}} \\right)$$\nIf we assume the output resistances $r_o$ are very large ($r_o \\to \\infty$), the expression simplifies to:\n$$R_x \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)$$",
        "format": "markdown",
        "sha256": "6790182c751b3a7d7600b4fb7ad14882d7d3fc858c7ce607d956e89151dca77f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a plausible static, symmetry-based gm resistance, but ignores the oscillation-driven charging and discharging of the node capacitances, which sets the resistance in this question.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 8652,
        "total_tokens": 9764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 8652,
        "total_tokens": 9764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_x$ looking into the supply node of the 3-stage ring oscillator, we can analyze the circuit by considering a single inverter stage and then combining the results for all three stages.\n\n### 1. Small-Signal Model of a Single Inverter Stage\nA CMOS inverter consists of a PMOS transistor (top) and an NMOS transistor (bottom). Let $v_x$ be a small-signal voltage applied at the common supply node and $i_{x,1}$ be the small-signal current drawn by one inverter stage from this node.\n\nFor the **PMOS transistor**:\n*   The source is connected to the supply node: $v_{s,p} = v_x$.\n*   The gate is connected to the input node: $v_{g,p} = v_{in}$.\n*   The drain is connected to the output node: $v_{d,p} = v_{out}$.\n*   The small-signal current from source to drain is $i_{sd,p} = g_{mp}(v_{s,p} - v_{g,p}) + \\frac{v_{s,p} - v_{d,p}}{r_{op}} = g_{mp}(v_x - v_{in}) + \\frac{v_x - v_{out}}{r_{op}}$.\n\nFor the **NMOS transistor**:\n*   The source is grounded: $v_{s,n} = 0$.\n*   The gate is connected to the input node: $v_{g,n} = v_{in}$.\n*   The drain is connected to the output node: $v_{d,n} = v_{out}$.\n*   The small-signal current from drain to source is $i_{ds,n} = g_{mn}v_{in} + \\frac{v_{out}}{r_{on}}$.\n\n### 2. Analysis at the DC Operating Point\nIn a ring oscillator, the small-signal resistance is typically evaluated at the DC operating point where all nodes are at the switching threshold. By symmetry, a change in the supply voltage $v_x$ will cause an identical change in all node voltages. Thus, for each stage, we can assume $v_{in} = v_{out} = v$.\n\nApplying Kirchhoff's Current Law (KCL) at the output node of one inverter (assuming no external load):\n$$i_{sd,p} = i_{ds,n}$$\n$$g_{mp}(v_x - v) + \\frac{v_x - v}{r_{op}} = g_{mn}v + \\frac{v}{r_{on}}$$\nLet $g_p = g_{mp} + \\frac{1}{r_{op}}$ and $g_n = g_{mn} + \\frac{1}{r_{on}}$. The equation simplifies to:\n$$g_p(v_x - v) = g_n v$$\nSolving for $v$:\n$$v = \\frac{g_p}{g_n + g_p} v_x$$\n\n### 3. Calculating the Total Resistance $R_x$\nThe current drawn from the supply by one stage is:\n$$i_{x,1} = i_{sd,p} = g_p(v_x - v) = g_p \\left( v_x - \\frac{g_p}{g_n + g_p} v_x \\right) = \\frac{g_p g_n}{g_n + g_p} v_x$$\nThe resistance of a single stage seen from the supply is:\n$$R_{x,1} = \\frac{v_x}{i_{x,1}} = \\frac{g_n + g_p}{g_n g_p} = \\frac{1}{g_n} + \\frac{1}{g_p}$$\nSince there are 3 identical stages connected in parallel to the same supply node, the total resistance $R_x$ is:\n$$R_x = \\frac{1}{3} R_{x,1} = \\frac{1}{3} \\left( \\frac{1}{g_n} + \\frac{1}{g_p} \\right)$$\nSubstituting back the full expressions for $g_n$ and $g_p$:\n$$R_x = \\frac{1}{3} \\left( \\frac{1}{g_{mn} + r_{on}^{-1}} + \\frac{1}{g_{mp} + r_{op}^{-1}} \\right)$$\nIf we assume the output resistances $r_o$ are very large ($r_o \\to \\infty$), the expression simplifies to:\n$$R_x \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)$$",
        "format": "markdown",
        "sha256": "6790182c751b3a7d7600b4fb7ad14882d7d3fc858c7ce607d956e89151dca77f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a plausible static, symmetry-based gm resistance, but ignores the oscillation-driven charging and discharging of the node capacitances, which sets the resistance in this question.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 8652,
        "total_tokens": 9764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 8652,
        "total_tokens": 9764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the answer changes significantly if the circuit oscillates.\n\nHere is the reasoning:\n\n### 1. The Initial Assumption (Equilibrium Point)\nThe formula $R_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)$ is derived based on the assumption that the circuit is at its **unstable equilibrium point** (the trip point). At this specific point:\n*   The input and output voltages of each inverter are equal ($V_{in} = V_{out}$).\n*   For both the NMOS and PMOS transistors, the gate-source voltage equals the drain-source voltage ($|V_{GS}| = |V_{DS}|$).\n*   This condition makes both transistors behave like **diode-connected devices** in series between the supply and ground.\n*   Since there are three such inverters in parallel at the supply node, the total resistance is one-third of the resistance of a single stage.\n\n### 2. Why it changes during oscillation\nWhen the circuit oscillates, the node voltages are no longer constant at the trip point; they swing between $V_{DD}$ and Ground. This changes the resistance for several reasons:\n\n*   **Loss of \"Diode-Connected\" Behavior:** As soon as the circuit moves away from the trip point, $V_{in} \\neq V_{out}$. Therefore, $|V_{GS}| \\neq |V_{DS}|$, and the transistors no longer behave like simple diode-connected loads. Their small-signal resistances ($1/g_m$ or $r_o$) change drastically depending on their region of operation.\n*   **Transistor Regions of Operation:** During a large-signal oscillation, the transistors spend most of their time in the **triode** or **cutoff** regions rather than the saturation region. \n    *   When an inverter's output is high, the PMOS is in triode (low resistance) but the NMOS is cutoff (nearly infinite resistance). \n    *   Because the NMOS and PMOS are in series, if one is cutoff, the path from $V_{DD}$ to ground for that stage becomes a very high impedance.\n*   **Time-Varying Resistance:** The instantaneous resistance $R_X(t)$ becomes a periodic, time-varying function. The \"small-signal\" resistance seen by the supply would effectively be the average of this time-varying impedance, which is much higher than the value at the trip point because the DC current path is \"broken\" for a large portion of the cycle in each stage.\n\n### Conclusion\nThe initial calculation only describes the resistance at the **start-up moment** or the unstable DC bias point. Once oscillation is sustained, the transistors are no longer biased at the trip point, and the effective resistance seen looking into the supply node increases substantially.",
        "format": "markdown",
        "sha256": "16c5d4b79528532c48202c58a3a313097b4e8d4d83fcd1f018d766790d370f4a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It repeats the static estimate’s trip-point interpretation, then incorrectly concludes that oscillation makes the supply resistance much higher because devices are off much of the cycle. The dominant capacitive charging/discharging mechanism gives a resistance still on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 4316,
        "total_tokens": 5513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 4316,
        "total_tokens": 5513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the answer changes significantly if the circuit oscillates.\n\nThe formula $R_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)$ is derived based on the assumption that the ring oscillator is at its **metastable equilibrium point**. At this point, all nodes are at the inverter's trip point ($V_{in} = V_{out} = V_{trip}$), and the strong negative feedback of the loop forces the small-signal voltages at the input and output of each stage to be nearly equal. This makes the transistors behave as if they were **diode-connected**, leading to the $1/g_m$ terms.\n\nIf the circuit oscillates, this answer changes for several reasons:\n\n1.  **Loss of \"Diode-Connected\" Behavior:** In an oscillating state, the node voltages are constantly changing and are rarely equal to each other ($V_{in} \\neq V_{out}$). The assumption that $V_{GS} = V_{DS}$ for the transistors no longer holds, so they do not behave as simple diode-connected devices.\n2.  **Operating Regions:** During oscillation, the transistors do not stay in the saturation region. They swing between the **triode (linear)**, **saturation**, and **cutoff** regions. The transconductances $g_{mn}$ and $g_{mp}$ are defined at a specific bias point (the trip point); during oscillation, these values change drastically throughout the cycle.\n3.  **Average Current and Resistance:** At the metastable point, both the NMOS and PMOS in every inverter are \"fully on\" in saturation, drawing maximum steady-state current. When oscillating, for a large portion of the cycle, one transistor in each pair is nearly off (cutoff), while the other is in triode. Consequently, the **average current** drawn from the supply is typically much lower, and the **effective resistance** $R_X$ seen by the supply is much higher than the value predicted by the small-signal formula at the trip point.\n4.  **Loop Gain:** For the circuit to oscillate, the loop gain must be exactly unity at the oscillation frequency. This is a fundamentally different condition than the high-gain negative feedback present at the metastable DC equilibrium. The way the internal nodes respond to a small change in the supply voltage ($V_X$) is completely different when the circuit is in a large-signal limit cycle.\n\nIn summary, the provided formula is only a valid approximation for the **non-oscillating, metastable state**. Once oscillation begins, the large-signal dynamics take over, and the small-signal resistance at the trip point is no longer a meaningful description of the supply node's impedance.",
        "format": "markdown",
        "sha256": "6849fab979a96a38400f59264a5900a4f8a7a54d1b8b0297d282dbe166bc323c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that the static diode-connected model does not describe oscillation, but reaches the opposite central conclusion: it claims the effective resistance becomes much higher because devices are off. The answer misses that capacitive charging and discharging set RX, which remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 8058,
        "total_tokens": 9255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 8058,
        "total_tokens": 9255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the answer changes. The formula provided, $R_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)$, is only valid when the ring oscillator is at its **metastable DC operating point** (the \"trip point\") and is **not oscillating**.\n\nHere is why the resistance changes when the circuit oscillates:\n\n### 1. Departure from the Trip Point\nThe \"diode-connected\" assumption relies on the condition that the input voltage ($V_{in}$) and output voltage ($V_{out}$) of each inverter are equal. At the DC trip point, $V_{in} = V_{out}$, which means for each transistor, the gate and drain are at the same potential. This makes them behave like diode-connected devices in series between the supply and ground.\n\nWhen the circuit oscillates, the node voltages are constantly changing and are rarely at the trip point. Because there is a significant phase shift between the input and output of each stage (e.g., $240^\\circ$ in a 3-stage oscillator), $V_{in}(t) \\neq V_{out}(t)$ for most of the cycle. Consequently, the transistors do not behave as simple diode-connected loads.\n\n### 2. Change in Operating Regions\nIn a non-oscillating state at the trip point, all transistors are biased in the **saturation region**, where their transconductance ($g_m$) is high and relatively stable. \n\nWhen oscillating, the transistors swing across all regions of operation:\n*   **Triode (Linear) Region:** When an output is near the supply or ground, the corresponding \"on\" transistor enters the triode region, where its effective resistance is much lower than $1/g_m$.\n*   **Cutoff Region:** For a large portion of the cycle, one of the two transistors in each inverter is completely off, meaning it contributes zero small-signal conductance to the supply node.\n\n### 3. Frequency-Dependent Current (Dynamic Power)\nIn an oscillating ring oscillator, the supply current is not just the static \"short-circuit\" current flowing through the inverters; it is dominated by the **dynamic current** required to charge and discharge the load capacitances ($I_{avg} \\approx 3 \\cdot f \\cdot C_{load} \\cdot V_{DD}$). \n\nA small change in the supply voltage ($V_{DD}$) will change the oscillation frequency ($f$). Since the average current depends on both $V_{DD}$ and $f$, the small-signal resistance ($\\partial V_{DD} / \\partial I_{avg}$) will include a term related to the frequency sensitivity of the oscillator, which is not captured by the static $g_m$ formula.\n\n### Conclusion\nThe small-signal resistance $R_X$ in an oscillating state is a time-averaged quantity that depends on the large-signal waveforms, the oscillation frequency, and the switching characteristics of the transistors. It will be significantly different from the simple static value calculated at the trip point.",
        "format": "markdown",
        "sha256": "88f9f484504db5650c8beff471c4e8199fe37dda2daaf179655f7fc3d4572961"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies dynamic charging of the load capacitances as a major supply-current mechanism, but does not derive the resulting resistance or show that it remains on the order of the MOS on-resistance. Its conclusion that the resistance is significantly different misses the golden solution’s key magnitude result.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 8589,
        "total_tokens": 9786,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 8589,
        "total_tokens": 9786,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which is a **StrongArm latch** (a type of dynamic comparator), the **initial voltage gain** refers to the gain from the differential input $\\Delta V_{in} = V_{in1} - V_{in2}$ to the differential output $\\Delta V_{out}$ at the moment the regenerative feedback (the cross-coupled pairs) begins to take over.\n\nHere is the step-by-step analysis of how the width of $M_7$ ($W_7$) affects this gain:\n\n1.  **Tail Current ($I_{tail}$):** Transistor $M_7$ acts as the tail current source for the input differential pair ($M_1, M_2$). As the width $W_7$ increases, the tail current $I_{tail}$ increases proportionally ($I_{tail} \\propto W_7$).\n2.  **Transconductance ($g_m$):** The transconductance of the input transistors $M_1$ and $M_2$ is proportional to the square root of their drain current. Since $I_{D1,2} \\approx I_{tail}/2$, we have $g_{m1,2} \\propto \\sqrt{I_{tail}} \\propto \\sqrt{W_7}$.\n3.  **Integration Time ($\\Delta t$):** During the initial evaluation phase, the output nodes $X$ and $Y$ (initially precharged to $V_{DD}$) discharge. The \"initial gain\" phase lasts until the nodes drop enough to turn on the cross-coupled transistors. The time $\\Delta t$ required for this discharge is inversely proportional to the current: $\\Delta t \\propto \\frac{C \\cdot \\Delta V}{I_{tail}} \\propto \\frac{1}{W_7}$.\n4.  **Initial Gain ($A_v$):** The initial voltage gain can be approximated as the product of the transconductance and the integration time divided by the load capacitance:\n    $$A_v \\approx \\frac{g_{m1,2} \\cdot \\Delta t}{C}$$\n    Substituting the proportionalities:\n    $$A_v \\propto \\frac{\\sqrt{W_7} \\cdot (1/W_7)}{C} \\propto \\frac{1}{\\sqrt{W_7}}$$\n\n**Conclusion:**\nAs the width of $M_7$ increases, the tail current increases faster than the transconductance of the input pair. This leads to a shorter integration time for the input signal before regeneration begins, which ultimately causes the **initial voltage gain to decrease**.",
        "format": "markdown",
        "sha256": "c976b03e30f30cc2a3c1432170294cf1a2f32a5fc6b32d7ed90d79317892e479"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that increasing M7 width decreases the initial gain and explains that tail current rises faster than input-pair transconductance, shortening the integration interval and reducing gain.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 2443,
        "total_tokens": 3532,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1892,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 2443,
        "total_tokens": 3532,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1892,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which is a **StrongArm latch** (a type of dynamic comparator), the transistor $M_7$ acts as a tail current source that is activated during the evaluation phase (when $CK$ goes high).\n\nTo understand what happens to the initial voltage gain as the width of $M_7$ ($W_7$) increases, we can analyze the operation during the initial integration phase:\n\n1.  **Tail Current ($I_{SS}$):** When $CK$ goes high, $M_7$ turns on and provides a tail current $I_{SS}$. Increasing the width $W_7$ reduces the on-resistance of $M_7$ and increases the tail current $I_{SS}$ for a given $V_{DD}$.\n2.  **Integration Phase:** Before the cross-coupled pairs ($M_3-M_6$) start the regenerative process, the input differential pair ($M_1, M_2$) discharges the parasitic capacitances at nodes $P, Q$ and subsequently $X, Y$. The initial voltage gain $A_v$ is the gain from the input $\\Delta V_{in}$ to the differential output $\\Delta V_{out}$ just before regeneration begins.\n3.  **Gain Expression:** The initial gain can be approximated by the ratio of the transconductance of the input pair ($g_{m1,2}$) to the rate at which the nodes are discharged. Specifically, the gain is proportional to:\n    $$A_v \\approx \\frac{g_{m1,2} \\cdot \\Delta t}{C_L}$$\n    where $\\Delta t$ is the time it takes for the output nodes to drop to a level that triggers regeneration. This time $\\Delta t$ is inversely proportional to the tail current ($\\Delta t \\propto \\frac{1}{I_{SS}}$).\n4.  **Relationship with $I_{SS}$:** The transconductance $g_{m1,2}$ of the input transistors is proportional to the square root of the current ($\\sqrt{I_{SS}}$) when they are in saturation. Substituting these into the gain expression:\n    $$A_v \\propto \\frac{\\sqrt{I_{SS}}}{I_{SS}} = \\frac{1}{\\sqrt{I_{SS}}}$$\n    Alternatively, using the overdrive voltage $V_{OV} = V_{GS} - V_{th}$, we know $g_m = \\frac{2I_D}{V_{OV}}$. The gain becomes $A_v \\propto \\frac{1}{V_{OV}}$. As $I_{SS}$ increases (due to a larger $W_7$), the overdrive voltage $V_{OV}$ of the input pair also increases.\n\n**Conclusion:**\nAs the width of $M_7$ increases, the tail current increases, which leads to a faster discharge of the nodes but a shorter integration time. Because the current increases faster than the transconductance, the **initial voltage gain decreases**. While a larger $M_7$ makes the comparator faster, it reduces its sensitivity (initial gain) before regeneration takes over.",
        "format": "markdown",
        "sha256": "0376a38358812b411c96cd1dc1d07bb313815f8a8d3c8a541ca09ec834c321da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that increasing M7 width increases tail current and decreases initial gain: the input-pair transconductance grows more slowly than the current, shortening the integration interval. Minor approximations in the integration explanation do not change the essential reasoning.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 3052,
        "total_tokens": 4141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2399,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 3052,
        "total_tokens": 4141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2399,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which is a **StrongArm latch** (a type of dynamic comparator), the **initial voltage gain decreases** as the width of transistor $M_7$ increases.\n\nHere is a step-by-step explanation of why this happens:\n\n1.  **Role of $M_7$:** Transistor $M_7$ acts as a tail current source (or switch) that is activated when the clock signal $CK$ goes high. Increasing the width ($W_7$) of $M_7$ reduces its on-resistance and increases the total tail current ($I_{tail}$) flowing through the input differential pair ($M_1, M_2$).\n\n2.  **Initial Gain Phase:** When $CK$ goes high, nodes $X$ and $Y$ (initially precharged to $V_{DD}$) begin to discharge. The \"initial voltage gain\" refers to the differential voltage developed at these nodes ($\\Delta V_{X,Y}$) due to the input difference ($\\Delta V_{in} = V_{in1} - V_{in2}$) before the regenerative feedback of the cross-coupled pairs ($M_3-M_6$) takes over.\n\n3.  **Gain Relationship:** The differential voltage developed is approximately:\n    $$\\Delta V_{X,Y} \\approx \\frac{\\Delta I \\cdot t}{C_{L}} = \\frac{g_{m1,2} \\cdot \\Delta V_{in} \\cdot t}{C_{L}}$$\n    where $t$ is the integration time (the time it takes for the nodes to discharge enough to trigger the next stage) and $C_L$ is the load capacitance at nodes $X$ and $Y$.\n\n4.  **Effect of Tail Current:**\n    *   The transconductance of the input pair is $g_{m1,2} \\propto \\sqrt{I_{tail}}$.\n    *   The integration time $t$ is inversely proportional to the tail current because a higher current discharges the nodes faster: $t \\propto \\frac{1}{I_{tail}}$.\n    *   Combining these, the initial gain $A_v$ is:\n        $$A_v = \\frac{\\Delta V_{X,Y}}{\\Delta V_{in}} \\propto \\frac{g_{m1,2}}{I_{tail}} \\propto \\frac{\\sqrt{I_{tail}}}{I_{tail}} = \\frac{1}{\\sqrt{I_{tail}}}$$\n\n5.  **Conclusion:** Since increasing the width of $M_7$ increases $I_{tail}$, the initial voltage gain **decreases**. While a larger $M_7$ makes the comparator faster (shorter delay), it reduces the pre-amplification gain, which can make the circuit more sensitive to noise and offset.",
        "format": "markdown",
        "sha256": "308853d21196eea9ca5a618e4ea672f64d99751b51ae410215f714aae7ffc699"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that initial gain decreases as M7 widens and gives a consistent explanation: wider M7 increases tail current, while the gain scales roughly as gm/Itail and gm grows only as the square root of current.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 2516,
        "total_tokens": 3605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1923,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1089,
        "output_tokens": 2516,
        "total_tokens": 3605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1923,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which is a **StrongArm latch** (a type of dynamic comparator), the **initial voltage gain** refers to the gain from the input differential voltage ($\\Delta V_{in} = V_{in1} - V_{in2}$) to the differential voltage developed at the output nodes ($X$ and $Y$) before the regenerative positive feedback of the cross-coupled inverters becomes dominant.\n\nHere is what happens when the capacitance at nodes $P$ and $Q$ is increased:\n\n1.  **Operation Phase:** When the clock signal $CK$ goes high, the tail transistor $M_7$ turns on, and the evaluation phase begins. Initially, nodes $P$ and $Q$ (which were precharged to $V_{DD}$) start to discharge through $M_1$ and $M_2$.\n2.  **Pre-amplification Phase:** The transistors $M_3$ and $M_4$ only turn on once the voltages at nodes $P$ and $Q$ have dropped by at least a threshold voltage ($V_{thn}$) below $V_{DD}$. During this time, the input transistors $M_1$ and $M_2$ act as a differential amplifier, converting the input voltage difference into a current difference.\n3.  **Effect of Capacitance at P and Q:** Increasing the capacitance at nodes $P$ and $Q$ ($C_P$ and $C_Q$) slows down the rate at which these nodes discharge. This effectively **increases the duration of the pre-amplification phase**.\n4.  **Gain Increase:** Because the pre-amplification phase lasts longer, the input transistors $M_1$ and $M_2$ have more time to integrate the input signal difference onto the output nodes $X$ and $Y$ (once $M_3$ and $M_4$ are active). Mathematically, the initial gain $A_v$ is approximately proportional to the integration time, which in turn is proportional to the capacitance at nodes $P$ and $Q$.\n\n**Conclusion:**\nIncreasing the capacitance at nodes $P$ and $Q$ **increases the initial voltage gain** of the comparator. This is a common technique used to reduce the input-referred noise and offset of the latch, although it comes at the cost of increased power consumption and slower operating speed.",
        "format": "markdown",
        "sha256": "755f279af1b9ad359636c3157f613e3dbd22fba18f8d26c35a23049d5ae93f69"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance slows the discharge and lengthens the amplification phase, but incorrectly concludes that the initial gain increases. The longer phase is offset by the slower differential-voltage buildup, so the initial gain remains approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 4267,
        "total_tokens": 5355,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3772,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 4267,
        "total_tokens": 5355,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3772,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which is a **StrongArm latch** (a common type of dynamic comparator), increasing the capacitance at nodes **P** and **Q** will **increase the initial voltage gain**.\n\nHere is a detailed explanation of why this happens:\n\n### 1. Operation of the StrongArm Latch\nWhen the clock signal ($CK$) goes high, the evaluation phase begins. The tail transistor $M_7$ turns on, and the input differential pair ($M_1, M_2$) starts discharging the precharged nodes $P$ and $Q$. \n\nInitially, transistors $M_3$ and $M_4$ are off. The input transistors $M_1$ and $M_2$ convert the input differential voltage ($\\Delta V_{in} = V_{in1} - V_{in2}$) into a differential current ($\\Delta I = g_{m1,2} \\Delta V_{in}$). This current difference discharges the capacitances at nodes $P$ and $Q$.\n\n### 2. The Role of Capacitance at P and Q\nThe \"initial voltage gain\" refers to the gain from the input to the output nodes ($X$ and $Y$) during the integration period, just before the regenerative (positive feedback) action of the cross-coupled latches takes over.\n\n*   **Integration Time:** The time it takes for nodes $P$ and $Q$ to discharge enough to turn on $M_3$ and $M_4$ is proportional to the capacitance at those nodes ($C_P, C_Q$). \n*   **Longer Integration:** By increasing the capacitance at $P$ and $Q$, the discharge process is slowed down. This allows the input pair $M_1$ and $M_2$ to integrate the input signal for a **longer period of time** before the latching action begins.\n*   **Higher Gain:** Because the input signal is integrated over a longer duration, a larger differential voltage is developed at the output nodes ($X, Y$) before the high-speed regeneration starts. Mathematically, the initial gain is often expressed as being proportional to the ratio of the capacitances at the intermediate nodes to the output nodes ($C_{P,Q} / C_{X,Y}$).\n\n### Summary\nIncreasing the capacitance at nodes $P$ and $Q$ **increases the initial voltage gain** because it extends the integration time of the input differential pair. \n\n**Trade-off:** While this increases gain (which can help reduce the effects of transistor mismatch and noise), it also **increases the delay** of the comparator, making it slower.",
        "format": "markdown",
        "sha256": "ee33c693c5133b682526980aed8fdf73e3beca77fc1aa92278cb0fc3c813cf89"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gets the central result wrong: the longer integration time is offset by the slower node-voltage slope, so initial gain remains approximately unchanged. It correctly notes that larger capacitance increases delay, but its claimed gain increase and capacitance-ratio formula are incorrect.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 2848,
        "total_tokens": 3936,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 2848,
        "total_tokens": 3936,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which is a **StrongArm latch** (a common type of dynamic comparator), increasing the capacitance at nodes **P** and **Q** will **increase the initial voltage gain**.\n\nHere is a detailed explanation of why this happens:\n\n### 1. Operation of the StrongArm Latch\nWhen the clock signal ($CK$) goes high, the evaluation phase begins. The tail transistor $M_7$ turns on, and the input differential pair ($M_1, M_2$) starts discharging the precharged nodes $P$ and $Q$. \n\nInitially, transistors $M_3$ and $M_4$ are off. The input transistors $M_1$ and $M_2$ convert the input differential voltage ($\\Delta V_{in} = V_{in1} - V_{in2}$) into a differential current ($\\Delta I = g_{m1,2} \\Delta V_{in}$). This current difference discharges the capacitances at nodes $P$ and $Q$.\n\n### 2. The Role of Capacitance at P and Q\nThe \"initial voltage gain\" refers to the gain from the input to the output nodes ($X$ and $Y$) during the integration period, just before the regenerative (positive feedback) action of the cross-coupled latches takes over.\n\n*   **Integration Time:** The time it takes for nodes $P$ and $Q$ to discharge enough to turn on $M_3$ and $M_4$ is proportional to the capacitance at those nodes ($C_P, C_Q$). \n*   **Longer Integration:** By increasing the capacitance at $P$ and $Q$, the discharge process is slowed down. This allows the input pair $M_1$ and $M_2$ to integrate the input signal for a **longer period of time** before the latching action begins.\n*   **Higher Gain:** Because the input signal is integrated over a longer duration, a larger differential voltage is developed at the output nodes ($X, Y$) before the high-speed regeneration starts. Mathematically, the initial gain is often expressed as being proportional to the ratio of the capacitances at the intermediate nodes to the output nodes ($C_{P,Q} / C_{X,Y}$).\n\n### Summary\nIncreasing the capacitance at nodes $P$ and $Q$ **increases the initial voltage gain** because it extends the integration time of the input differential pair. \n\n**Trade-off:** While this increases gain (which can help reduce the effects of transistor mismatch and noise), it also **increases the delay** of the comparator, making it slower.",
        "format": "markdown",
        "sha256": "ee33c693c5133b682526980aed8fdf73e3beca77fc1aa92278cb0fc3c813cf89"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gets the central result wrong: the longer integration time is offset by the slower node-voltage slope, so initial gain remains approximately unchanged. It correctly notes that larger capacitance increases delay, but its claimed gain increase and capacitance-ratio formula are incorrect.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 2848,
        "total_tokens": 3936,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 2848,
        "total_tokens": 3936,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **StrongArm latch**, which is a type of high-speed dynamic comparator. To determine how increasing the widths of $M_5$ and $M_6$ affects its speed, we need to look at the two main phases of its operation:\n\n1.  **Precharge Phase ($CK = 0$):** The output nodes $X$ and $Y$ are precharged to $V_{DD}$ through transistors $S_3$ and $S_4$.\n2.  **Evaluation Phase ($CK = 1$):** The tail transistor $M_7$ turns on, and nodes $X$ and $Y$ begin to discharge through the input differential pair ($M_1, M_2$) and the NMOS cross-coupled pair ($M_3, M_4$). Once the nodes drop low enough, the PMOS cross-coupled pair ($M_5, M_6$) turns on to provide positive feedback (regeneration), pulling one node back to $V_{DD}$ while the other continues to $0$.\n\n### Effect of Increasing Widths of $M_5$ and $M_6$:\n\nIncreasing the widths of the PMOS transistors $M_5$ and $M_6$ has two competing effects:\n\n*   **Positive Effect (Regenerative Gain):** Larger widths increase the transconductance ($g_m$) of the PMOS pair. This strengthens the positive feedback, which can theoretically speed up the final stage of regeneration (pulling the \"winning\" node back to $V_{DD}$ faster).\n*   **Negative Effect (Capacitive Loading):** Larger widths significantly increase the parasitic capacitance at the output nodes $X$ and $Y$ (specifically the gate and drain capacitances of $M_5$ and $M_6$). \n\n### Conclusion:\nIn a StrongArm latch, the **speed degrades** when the widths of $M_5$ and $M_6$ are increased beyond a minimal size. \n\nThe primary reason is that the **increased capacitive loading** at nodes $X$ and $Y$ dominates. Because these nodes must discharge from $V_{DD}$ to initiate the sensing and regeneration process, a higher capacitance slows down the rate of discharge ($dV/dt = I/C$). This increases the time it takes for the circuit to \"decide\" and reach its final output state. \n\nIn high-speed design, $M_5$ and $M_6$ are typically kept relatively small to minimize this loading effect while still providing enough feedback to ensure a full-swing rail-to-rail output.",
        "format": "markdown",
        "sha256": "56fba8423dd7b05c2a611616e98c03db92a8343c59f789e2822311f41d1e5e30"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies both the increased regenerative strength and added parasitic capacitance, but incorrectly says capacitance dominates and concludes that widening degrades speed. The key result is that regeneration wins initially, with capacitance limiting the benefit only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5901,
        "total_tokens": 6989,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5351,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5901,
        "total_tokens": 6989,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5351,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram, which is a **StrongArm latch** (a common type of dynamic comparator), increasing the widths of transistors $M_5$ and $M_6$ will generally **degrade** the speed of the circuit.\n\nHere is a detailed explanation of why:\n\n1.  **Increased Parasitic Capacitance:** The speed of this comparator is primarily determined by how quickly the voltages at nodes $X$ and $Y$ can change. Increasing the widths of $M_5$ and $M_6$ increases their gate and drain parasitic capacitances, which are directly connected to nodes $X$ and $Y$.\n2.  **Slower Sensing Phase:** When the clock ($CK$) goes high, the circuit enters the evaluation phase. Initially, nodes $X$ and $Y$ are at $V_{DD}$, so the PMOS transistors $M_5$ and $M_6$ are **off** (their $V_{GS} = 0$). During this \"sensing\" period, they act only as dead-weight capacitors. The extra capacitance from larger $M_5/M_6$ slows down the initial discharge of nodes $X$ and $Y$, increasing the time it takes for the circuit to start regenerating.\n3.  **Regeneration Time Constant:** Once the voltage at $X$ or $Y$ drops enough to turn $M_5$ and $M_6$ on, positive feedback (regeneration) begins. The speed of this phase is governed by a time constant $\\tau \\approx C_{total} / (g_{m,n} + g_{m,p})$. While increasing the widths of $M_5$ and $M_6$ increases their transconductance ($g_{m,p}$), it also increases the total capacitance ($C_{total}$). Because PMOS transistors have lower mobility than NMOS transistors, they typically add more capacitance than they add \"driving strength\" ($g_m$) relative to the NMOS pair. This often results in a larger (slower) time constant.\n\nIn summary, the added parasitic capacitance outweighs the benefit of the increased transconductance, leading to a **degradation** in overall speed.",
        "format": "markdown",
        "sha256": "c72c45b5eb8f2cb2ee1a2a42671b2a84918aabc6cae29924b0a8b514d3dce880"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the key result: widening M5/M6 initially improves speed because stronger regeneration outweighs added capacitance. It mentions both effects, but incorrectly claims capacitance dominates from the outset.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 7025,
        "total_tokens": 8113,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 7025,
        "total_tokens": 8113,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which is a **StrongArm latch** (a type of dynamic comparator), the transistors $M_5$ and $M_6$ form a **PMOS cross-coupled pair**. This pair, along with the NMOS cross-coupled pair ($M_3$ and $M_4$), provides the positive feedback necessary for the latching (regeneration) process.\n\nWhen the widths of $M_5$ and $M_6$ are increased, the following effects occur:\n\n1.  **Increased Transconductance ($g_m$):** The transconductance of the PMOS pair ($g_{m5,6}$) increases. The regeneration speed of the latch is primarily determined by the total transconductance of the cross-coupled pairs ($g_{m,total} = g_{m3,4} + g_{m5,6}$). A higher total $g_m$ leads to a faster exponential growth of the voltage difference between nodes $X$ and $Y$.\n2.  **Increased Capacitance ($C$):** Larger transistors also add more parasitic capacitance to the output nodes $X$ and $Y$. This extra capacitance tends to slow down the circuit.\n\n**Conclusion:**\nIn most practical designs, the benefit of the increased transconductance outweighs the drawback of the added parasitic capacitance, especially when there is a significant fixed load from the following stages. The regeneration time constant $\\tau \\approx C_{total} / g_{m,total}$ generally decreases as the widths of the cross-coupled transistors are increased (up to a certain point of self-loading).\n\nTherefore, increasing the widths of $M_5$ and $M_6$ typically **improves** the speed of the comparator by strengthening the positive feedback and shortening the regeneration time.",
        "format": "markdown",
        "sha256": "c74680d4d0b0b1cd586ca716687d00de4c5d8498cf1aaad8e3901ea75c2b10de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M5/M6 initially improves speed by strengthening regeneration, while added parasitic capacitance eventually limits the benefit and creates an optimum.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5470,
        "total_tokens": 6558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1088,
        "output_tokens": 5470,
        "total_tokens": 6558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which is a master-slave latch configuration (often used as a divide-by-2 circuit or a toggle flip-flop), increasing the widths of the clocked transistors generally leads to a **degradation** in speed.\n\nHere is a detailed explanation of why:\n\n1.  **Increased Parasitic Capacitance:** Increasing the width of a transistor increases its parasitic capacitances, specifically the drain (diffusion) capacitance and the gate capacitance. In this circuit, the clocked transistors are directly connected to the internal nodes $X$ and $Y$. Larger widths mean more capacitance at these nodes, which requires more time to charge and discharge, thereby slowing down the signal transitions.\n2.  **Increased Clock Load:** The gates of the clocked transistors are driven by the clock signals ($CK$ and $\\overline{CK}$). Increasing their widths increases the capacitive load on the clock drivers. This can slow down the rise and fall times of the clock signals themselves, leading to slower switching of the entire circuit.\n3.  **Diminishing Returns on Resistance:** While increasing the width of a transistor reduces its \"on-resistance\" ($R_{on}$), which would theoretically allow for faster charging/discharging, there is an optimal point. In a series stack of transistors (like the clocked inverters here), the total delay is roughly proportional to $R_{total} \\times C_{total}$. \n    *   $R_{total}$ decreases as width increases.\n    *   $C_{total}$ increases as width increases.\n    \n    Mathematically, the delay $\\tau$ of such a stage is minimized when the widths of the transistors in the stack are roughly equal. If the clocked transistors are already sized appropriately relative to the input transistors, further increasing their width will cause the increase in capacitance to outweigh the decrease in resistance, resulting in a higher $RC$ time constant and thus **degrading the speed**.",
        "format": "markdown",
        "sha256": "3f5d4f4caaf0fe6f0245149bd2853ef43eb4c40f2ed0cd260af48ec1a02300a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the resistance–capacitance tradeoff, but concludes that widening generally degrades speed and never states the key result that speed improves initially as the clocked transistors’ on-resistance falls.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 6314,
        "total_tokens": 7411,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 6314,
        "total_tokens": 7411,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which is a **$C^2MOS$ (Clocked CMOS)** master-slave latch configured in a feedback loop (forming a divide-by-2 circuit or a T-flip-flop), increasing the widths of the clocked transistors will generally **degrade** the speed of the circuit.\n\nHere is a detailed breakdown of why:\n\n1.  **Increased Parasitic Capacitance at Output Nodes:** In the diagram, the clocked transistors (driven by $CK$ and $\\overline{CK}$) are the \"inner\" transistors of the stack, meaning their drains are directly connected to the output nodes of each stage (nodes $X$ and $Y$). Increasing their width directly increases the parasitic drain capacitance at these critical nodes. Since the delay of a stage is proportional to the total capacitance at its output node, this added capacitance slows down the charging and discharging of nodes $X$ and $Y$.\n\n2.  **Increased Clock Load:** Increasing the width of the clocked transistors increases the gate capacitance that the clock drivers must charge and discharge. This leads to slower rise and fall times for the clock signals ($CK$ and $\\overline{CK}$). Slower clock edges mean the clocked inverters spend more time in a partially-on state during transitions, which increases the propagation delay from the clock edge to the output change.\n\n3.  **Diminishing Returns on Resistance:** While increasing the width does reduce the \"on\" resistance of the clocked transistors (which would theoretically help speed), this effect is often outweighed by the increase in capacitance. In a typical design, transistors are already sized near an optimal point; further increasing the width leads to \"self-loading,\" where the added parasitic capacitance slows the circuit down more than the reduced resistance speeds it up.\n\nIn summary, because the clocked transistors are connected to the output nodes and the clock lines, increasing their widths adds significant parasitic capacitance that **degrades** the overall speed of the circuit.",
        "format": "markdown",
        "sha256": "936bf229ea762060ee86b6addfde3bbf246d4e8a5b4152eff8b3571c3384566d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer concludes that widening the clocked transistors degrades speed, contrary to the required initial improvement from reduced on-resistance. The added capacitance is a real limiting effect, but it does not justify the stated trend.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 9999,
        "total_tokens": 11096,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9600,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 9999,
        "total_tokens": 11096,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9600,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which is a **$C^2MOS$ (Clocked CMOS)** latch-based structure, increasing the widths of the clocked transistors will generally **degrade** the speed of the circuit.\n\nHere is a detailed breakdown of why:\n\n1.  **Increased Parasitic Capacitance at Output Nodes:** In this specific topology, the clocked transistors (those with gates labeled $CK$ and $\\overline{CK}$) are the \"inner\" transistors of the stacks, meaning their drains are directly connected to the output nodes ($X$ and $Y$). Increasing their width increases their drain capacitance, which directly loads these nodes. More capacitance at nodes $X$ and $Y$ means it takes longer for the circuit to charge and discharge them, thus slowing down the signal transitions.\n2.  **Increased Clock Load:** Increasing the width of these transistors also increases their gate capacitance. This places a heavier load on the clock drivers ($CK$ and $\\overline{CK}$). If the clock drivers are not infinitely strong, the clock edges will become slower (longer rise and fall times). Slower clock edges mean the transistors spend more time in the high-resistance region during switching, which further degrades the overall speed and timing of the circuit.\n3.  **Diminishing Returns on Resistance:** While increasing the width does decrease the \"on\" resistance of the clocked transistors (which would theoretically help speed), this benefit is usually outweighed by the increase in parasitic capacitance. In a well-designed circuit, these transistors are already sized to be a reasonable bottleneck; making them even larger adds more \"dead weight\" in the form of capacitance than it adds in \"driving power\" (conductance).\n\n**Conclusion:**\nIncreasing the widths of the clocked transistors increases the parasitic capacitance at the critical internal nodes and the load on the clock tree, both of which lead to a **degradation** in the circuit's speed.",
        "format": "markdown",
        "sha256": "c958d6efe62d041ce72488d41e2150616e19d6796903bacb779dfe31a37b9801"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The topology and capacitance penalty are recognized, but the answer concludes that widening generally degrades speed. The golden solution says widening improves speed initially as on-resistance falls, with added capacitance limiting or reversing the benefit only at larger widths.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 8099,
        "total_tokens": 9196,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7709,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 8099,
        "total_tokens": 9196,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7709,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the structure in the figure provides **quadrature outputs**.\n\nHere is a breakdown of why:\n\n1.  **Circuit Identification**: The circuit is a **divide-by-two frequency divider** implemented using dynamic logic (specifically, $C^2MOS$ latches). It consists of two clocked inverting stages followed by a static inverter ($Inv_3$) in a feedback loop.\n2.  **Operation**:\n    *   The first stage (output $X$) is a transparent latch when $CK$ is high. It inverts the feedback signal $Z$.\n    *   The second stage (output $Y$) is a transparent latch when $CK$ is low. It inverts the signal from node $X$.\n    *   The third stage is a simple inverter: $Z = \\overline{Y}$.\n3.  **Phase Relationship**:\n    *   Because the two clocked stages are controlled by opposite phases of the clock ($CK$ and $\\overline{CK}$), node $X$ updates its value on the **rising edge** of the clock, while node $Y$ updates its value on the **falling edge** of the clock.\n    *   The output signals at $X$ and $Y$ have a frequency that is half of the input clock frequency (period $T_{out} = 2 \\cdot T_{CK}$).\n    *   The time delay between a transition at node $X$ and a transition at node $Y$ is exactly half a clock cycle ($T_{CK} / 2$).\n    *   In terms of the output signal's phase, this delay corresponds to:\n        $$\\text{Phase Shift} = \\frac{\\text{Delay}}{\\text{Output Period}} \\times 360^\\circ = \\frac{T_{CK} / 2}{2 \\cdot T_{CK}} \\times 360^\\circ = \\frac{1}{4} \\times 360^\\circ = 90^\\circ$$\n4.  **Conclusion**: Since the signals at nodes $X$ and $Y$ (or $X$ and $Z$) are $90^\\circ$ out of phase, they are considered **quadrature outputs** (often referred to as $I$ and $Q$ phases).",
        "format": "markdown",
        "sha256": "34ff6155845a20e63bc9ebab35bdbee28c265ecaea42188d57ed68d82e549b41"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the latches switching on opposite clock phases, but claims an exact phase relationship and omits the Inv3 delay and unequal latch loading that prevent exact quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 3320,
        "total_tokens": 4403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2836,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 3320,
        "total_tokens": 4403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2836,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **divide-by-2 circuit** implemented using a master-slave D flip-flop configuration. It is a common structure used to generate **quadrature outputs**.\n\nHere is a breakdown of why it provides quadrature outputs:\n\n1.  **Circuit Functionality:**\n    *   The first stage (output $X$) is a transparent latch that is active when the clock ($CK$) is high.\n    *   The second stage (output $Y$) is a transparent latch that is active when the clock ($CK$) is low.\n    *   The inverter $Inv_3$ provides the feedback from the output $Y$ back to the input of the first stage, creating a toggle (T) flip-flop configuration.\n    *   Because the feedback is inverted, the circuit toggles its state every clock cycle, resulting in an output frequency that is exactly half of the input clock frequency ($f_{out} = f_{CK} / 2$).\n\n2.  **Phase Relationship:**\n    *   The output of the first latch ($X$) changes state on the **rising edge** of the clock.\n    *   The output of the second latch ($Y$) changes state on the **falling edge** of the clock.\n    *   This means there is a time delay of exactly half a clock cycle ($T_{CK} / 2$) between the transitions of $X$ and $Y$.\n    *   Since the period of the output signals is twice the clock period ($T_{out} = 2 \\cdot T_{CK}$), a delay of $T_{CK} / 2$ corresponds to exactly **one-quarter of the output period** ($90^\\circ$ phase shift).\n\n3.  **Conclusion:**\n    *   The signals at nodes $X$ and $Y$ (or $X$ and $Z$) are $90^\\circ$ out of phase relative to each other at the divided frequency.\n    *   Therefore, the structure **does provide quadrature outputs**. These are typically used in communication systems for I (In-phase) and Q (Quadrature) signal generation.",
        "format": "markdown",
        "sha256": "840dda3853a6532d725687562bf1c33495c10c2c8513f5260ece201a63da5a25"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the half-clock-period separation, but incorrectly presents it as exact and omits both the Inv3 delay and unequal latch loading that make the phase relationship imperfect.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 2359,
        "total_tokens": 3442,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1906,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 2359,
        "total_tokens": 3442,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1906,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **divide-by-2 circuit** (often implemented as a T-flip-flop) using dynamic CMOS logic. It is a classic structure used to generate **quadrature outputs** from a clock signal.\n\nHere is a breakdown of why it provides quadrature outputs:\n\n1.  **Circuit Functionality**: The structure consists of two cascaded clocked inverters followed by a standard inverter ($Inv_3$). \n    *   The first stage (output $X$) acts as a master latch that is transparent when $CK$ is high.\n    *   The second stage (output $Y$) acts as a slave latch that is transparent when $CK$ is low.\n    *   The output $Z$ is fed back to the input of the first stage, creating a toggle (divide-by-2) operation.\n\n2.  **Phase Relationship**: \n    *   The signal at node **$X$** transitions on the **rising edges** of the clock ($CK$).\n    *   The signal at node **$Y$** (and consequently **$Z$**) transitions on the **falling edges** of the clock ($CK$).\n    *   Because the circuit divides the clock frequency by 2, the period of the output signals ($X, Y, Z$) is twice the period of the clock ($T_{out} = 2T_{CK}$).\n    *   The time delay between a transition at $X$ and a transition at $Y$ is exactly half a clock period ($T_{CK}/2$).\n    *   In terms of the output phase, this delay corresponds to:\n        $$\\text{Phase Shift} = \\frac{T_{CK}/2}{T_{out}} \\times 360^\\circ = \\frac{T_{CK}/2}{2T_{CK}} \\times 360^\\circ = 90^\\circ$$\n\n3.  **Conclusion**: Since the signals at nodes $X$ and $Y$ (or $X$ and $Z$) are shifted by 90 degrees relative to each other, the structure **does provide quadrature outputs**. Typically, $X$ would represent the In-phase ($I$) component and $Y$ (or $Z$) would represent the Quadrature ($Q$) component.",
        "format": "markdown",
        "sha256": "1bdd511287a6651bc13da00910a1c4f38e55935199899ce737a8a41a1118a901"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature relationship, but presents it as exact and omits the Inv3 delay and unequal latch loading that make the outputs non-ideal.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 2488,
        "total_tokens": 3571,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1083,
        "output_tokens": 2488,
        "total_tokens": 3571,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which is a **$C^2MOS$ (Clocked CMOS)** master-slave register (configured as a toggle flip-flop), increasing the widths of the clocked transistors typically causes the speed to **degrade**.\n\nWhile it might seem intuitive that wider transistors would improve speed by reducing resistance, there are several critical factors in this specific topology that lead to a degradation in performance:\n\n1.  **Increased Clock Load:** The clocked transistors (those with gates connected to $CK$ and $\\overline{CK}$) are driven by the clock signal. Increasing their width increases their gate capacitance. This adds a significant load to the clock distribution network, which slows down the rise and fall times of the clock edges. In $C^2MOS$ circuits, the speed and reliability are highly sensitive to clock slopes; slower clock edges increase the propagation delay and can lead to \"clock overlap\" issues where both master and slave stages are partially active at the same time.\n\n2.  **Increased Internal Parasitic Capacitance:** The clocked transistors are located at the rails (top and bottom of the stacks). Increasing their width increases the parasitic drain capacitance at the internal nodes (the nodes between the clocked transistors and the signal transistors). When a stage becomes active, these internal nodes must be charged or discharged along with the output node. Although the resistance of the clocked transistors decreases, the added parasitic capacitance often offsets this gain, leading to a net increase in the $RC$ time constant of the switching path.\n\n3.  **Charge Sharing Effects:** $C^2MOS$ relies on the high-impedance state of the output node to hold its value during certain clock phases. If the internal node capacitance is large (due to wide clocked transistors), \"charge sharing\" between the output node and these internal nodes becomes more significant when the signal transistors turn on while the clocked transistors are still off. This can degrade the voltage levels at the output, requiring more time for the circuit to settle and potentially leading to errors at high frequencies.\n\nIn summary, although wider transistors have lower ON-resistance, the **increased clock loading** and **higher internal parasitic capacitances** dominate, resulting in an overall **degradation** of the circuit's speed.",
        "format": "markdown",
        "sha256": "7edb487d7596c87e08c2952824864dddf580bac4d72d849dd690af0c829b93ac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that speed degrades, opposite the correct result: wider clocked devices reduce series resistance with little effect on the data path, while charge sharing is tolerable up to a point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 18326,
        "total_tokens": 19430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17872,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 18326,
        "total_tokens": 19430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17872,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which is a master-slave latch configuration (specifically a $C^2MOS$ or clocked CMOS latch), the speed **improves** if the widths of the clocked transistors are increased.\n\nHere is a detailed explanation of why:\n\n1.  **Reduction in Series Resistance:** The clocked transistors (those with gates connected to $CK$ or $\\overline{CK}$) are in series with the data-driven transistors in each clocked inverter stage. The total resistance of the pull-up or pull-down path is the sum of the \"on\" resistances of the two transistors in that path. By increasing the width ($W$) of the clocked transistors, their on-resistance ($R_{on} \\propto 1/W$) decreases, which reduces the total resistance of the path.\n2.  **Faster Charging/Discharging:** A lower total resistance allows the load capacitance at the output of each stage to charge or discharge more quickly. This reduces the propagation delay through each stage, thereby increasing the overall speed (or maximum operating frequency) of the circuit.\n3.  **Capacitance Trade-off:** While increasing the width also increases the parasitic capacitance of the transistors, the clocked transistors in this specific diagram are placed closest to the supply rails ($V_{DD}$ and ground). This configuration is advantageous because the additional diffusion capacitance from the larger clocked transistors is mostly at the internal nodes rather than the output nodes. The reduction in resistance typically has a much more significant impact on speed than the slight increase in internal parasitic capacitance.\n\nTherefore, increasing the widths of the clocked transistors leads to an overall **improvement** in the circuit's speed.",
        "format": "markdown",
        "sha256": "3969184e4658b03ad15cdfc814ff457dc2e0fcd22720a5ae03229a6a4a3cd659"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked devices improves speed because it lowers their on-resistance and adds capacitance mainly at internal nodes. It omits charge sharing and its effect on swing, so it does not meet the full-credit rule.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 3574,
        "total_tokens": 4678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3234,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 3574,
        "total_tokens": 4678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3234,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which is a **C2MOS (Clocked CMOS) master-slave D-flip-flop** configured as a divide-by-2 circuit, increasing the widths of the clocked transistors generally causes the speed to **degrade**.\n\nHere is a detailed breakdown of why this happens:\n\n1.  **Increased Parasitic Capacitance:** The clocked transistors are in series with the signal transistors. Increasing their width increases the parasitic capacitance at the **internal nodes** (the nodes between the clocked transistors and the signal transistors). During every switching transition, this additional capacitance must be charged or discharged, which adds to the total propagation delay of each stage.\n\n2.  **Increased Clock Load:** The gates of the clocked transistors are connected to the clock signals ($CK$ and $\\overline{CK}$). Increasing their width significantly increases the **gate capacitance** that the clock driver must drive. In any real-world circuit, this increased load slows down the clock edges (increases rise and fall times). Slower clock edges mean the transistors turn on more slowly, which directly increases the **clock-to-Q delay** and reduces the maximum frequency at which the circuit can operate.\n\n3.  **Diminishing Returns on Resistance:** While increasing the width does reduce the \"on-resistance\" ($R_{on}$) of the clocked transistors, the benefit is often outweighed by the parasitic effects mentioned above. In a well-designed circuit, these transistors are already sized to provide a good balance between drive strength and parasitic load. Beyond an optimal point, the added capacitance dominates, and the overall speed of the circuit decreases.\n\nIn summary, although wider transistors have lower resistance, the **increased parasitic capacitance at internal nodes** and the **heavier load on the clock distribution network** lead to an overall **degradation** in speed.",
        "format": "markdown",
        "sha256": "e7ba042839c58d065c41f693dadc918968b4ba9f3207697ecb5cd064a797326d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that speed degrades, contrary to the golden result that widening improves speed by lowering series resistance with little data-path loading. It treats added internal capacitance and clock load as dominant and misses that charge-sharing degradation is acceptable up to a point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 14912,
        "total_tokens": 16016,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14540,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 14912,
        "total_tokens": 16016,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14540,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is an analysis of the circuit arrangement:\n\n### **1. Circuit Components**\nThe circuit consists of:\n*   **Three Inverters (NOT gates):** These are the triangular symbols with a small circle at the output.\n*   **Two Switches:** These are controlled by complementary clock signals, **$CK$** and **$\\overline{CK}$**. When $CK$ is high (closed), $\\overline{CK}$ is low (open), and vice versa.\n*   **Feedback Loop:** The output of the third inverter is connected back to the input of the first switch.\n\n### **2. Functional Analysis**\nThis arrangement is a **dynamic frequency divider** (specifically a divide-by-2 circuit). It operates in two distinct phases based on the clock signal:\n\n*   **Phase 1 ($CK$ is High, $\\overline{CK}$ is Low):**\n    *   The first switch is **closed**, and the second switch is **open**.\n    *   The first inverter ($Inv_1$) samples the current output of the third inverter. Because it is an inverter, it takes the output value and flips it (e.g., if the output was '0', the output of $Inv_1$ becomes '1').\n    *   This value is stored dynamically on the parasitic capacitance at the input of the second switch.\n\n*   **Phase 2 ($CK$ is Low, $\\overline{CK}$ is High):**\n    *   The first switch is **open**, and the second switch is **closed**.\n    *   The value previously stored at the output of $Inv_1$ is now passed through the second and third inverters.\n    *   Since there are two inverters in this path ($Inv_2$ and $Inv_3$), they act as a buffer, maintaining the logic level. The new value reaches the final output.\n\n### **3. Conclusion**\nBecause the output is fed back to the input in an inverted state once per clock cycle, the state of the output toggles every time the clock completes a full cycle (High $\\rightarrow$ Low). \n\n*   **Result:** The output signal will have exactly **half the frequency** of the input clock signal ($CK$). \n*   **Application:** This is a fundamental building block for digital counters and clock dividers in integrated circuits. It is essentially a **T-flip-flop** with its toggle input tied to '1'.",
        "format": "markdown",
        "sha256": "4d88962824b06399875c3f60f2f2362b591222df75c523a67c22a067493aaead"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic-latch divide-by-two circuit and explains that its output frequency is half the input clock frequency. Minor internal-path details are secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 2856,
        "total_tokens": 3955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2337,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 2856,
        "total_tokens": 3955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2337,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The arrangement shown in the figure is a **dynamic frequency divider by 2** (also known as a toggle flip-flop or T-flip-flop with its input tied to '1'). It uses three inverters and two complementary switches to create a feedback loop that toggles the output state on every clock cycle.\n\n### Circuit Components\n1.  **Three Inverters:** Connected in a series chain.\n2.  **Two Switches:** \n    *   The first switch is controlled by the clock signal **$CK$**.\n    *   The second switch is controlled by the complementary clock signal **$\\overline{CK}$**.\n    *   This means when one switch is closed (ON), the other is open (OFF).\n3.  **Feedback Loop:** The output of the third inverter is fed back to the input of the first switch.\n\n### Principle of Operation\nThe circuit operates in two distinct phases based on the clock signal:\n\n*   **Phase 1: $CK$ is High ($CK=1, \\overline{CK}=0$)**\n    *   The first switch is **closed**, and the second switch is **open**.\n    *   The first inverter ($Inv_1$) receives the current output of the third inverter. It produces an inverted version of this output at its own output node.\n    *   Because the second switch is open, this new value is \"blocked\" from reaching the rest of the circuit. The second and third inverters hold their previous state due to the parasitic capacitance at the input of the second inverter.\n\n*   **Phase 2: $CK$ is Low ($CK=0, \\overline{CK}=1$)**\n    *   The first switch is **open**, and the second switch is **closed**.\n    *   The first inverter is now disconnected from the feedback, but it holds its sampled value on its output capacitance.\n    *   The second switch allows this value to pass through the second and third inverters. Since two inverters in series act as a non-inverting buffer, the final output of the circuit now becomes equal to the value that was \"prepared\" by $Inv_1$ in the previous phase.\n\n### Conclusion\nIn every full clock cycle, the output of the circuit is forced to the opposite of its previous state. \n*   If the output was **'0'**, after one clock cycle it becomes **'1'**.\n*   If the output was **'1'**, after one clock cycle it becomes **'0'**.\n\nBecause it takes two full clock cycles for the output to return to its original state, the output frequency is exactly **half** of the input clock frequency ($f_{out} = f_{CK} / 2$). This is a common building block in digital counters and clock dividers. It is considered a **dynamic circuit** because it relies on charge storage on the internal nodes while the switches are open.",
        "format": "markdown",
        "sha256": "8020f126aa0bb23c5e75ede3a85be153937ca11ad97f59acae6f71f61704e73f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic divide-by-two and explains that its output toggles each clock cycle, giving half the input frequency. The detailed inverter-path description is secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 2513,
        "total_tokens": 3612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1901,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 2513,
        "total_tokens": 3612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1901,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a dynamic logic circuit consisting of three inverters and two switches controlled by complementary clock signals, $CK$ and $\\overline{CK}$. This specific arrangement is a classic implementation of a **dynamic frequency divider by 2** (or a T-flip-flop with its toggle input tied to high).\n\n### Circuit Analysis\n\nThe circuit operates in two distinct phases based on the state of the clock signal ($CK$):\n\n1.  **Phase 1: $CK$ is High ($CK = 1, \\overline{CK} = 0$)**\n    *   The first switch is **closed**, and the second switch is **open**.\n    *   The output of the third inverter is fed back to the input of the first inverter ($Inv_1$).\n    *   If the current state at the output of the third inverter is $Q$, then the output of $Inv_1$ becomes $\\overline{Q}$.\n    *   Because the second switch is open, this new value $\\overline{Q}$ is \"sampled\" and held on the parasitic capacitance at the input of the second switch. The rest of the circuit (the last two inverters) is isolated from this new value.\n\n2.  **Phase 2: $CK$ is Low ($CK = 0, \\overline{CK} = 1$)**\n    *   The first switch is **open**, and the second switch is **closed**.\n    *   The value $\\overline{Q}$ that was stored at the output of $Inv_1$ is now passed through the second and third inverters.\n    *   Since there are two inverters in series, they act as a buffer, so the value $\\overline{Q}$ propagates to the final output.\n    *   The output of the circuit has now toggled from $Q$ to $\\overline{Q}$.\n\n### Summary of Operation\n*   Every time the clock completes a full cycle ($1 \\rightarrow 0 \\rightarrow 1$), the output state toggles exactly once.\n*   As a result, the output signal will have half the frequency of the input clock signal $CK$.\n*   This is a **dynamic** circuit because it relies on the temporary storage of charge on the internal nodes while the switches are open. If the clock frequency is too low, the stored charge may leak away, causing the circuit to lose its state.\n\n### Conclusion\nThe arrangement is a **dynamic frequency divider by 2**. It is commonly used in high-speed digital circuits and frequency synthesizers due to its simplicity and low transistor count compared to static flip-flop designs.",
        "format": "markdown",
        "sha256": "01f260862a1d5b2e88ce5e73bcdea65eac47b3a6ff0ff02d725024484450749a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic-latch divide-by-two circuit and explains that its output toggles once per clock cycle, producing half the input frequency. The detailed phase description is not needed for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 2178,
        "total_tokens": 3277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1632,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1099,
        "output_tokens": 2178,
        "total_tokens": 3277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1632,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the figure is a **feedback inverter**, and its primary role is to convert a \"dynamic\" latch into a **\"static\" latch**.\n\nHere is a breakdown of how it affects the performance and behavior of the circuit:\n\n### 1. Static Data Storage (Reliability)\nWithout the red inverter, the node between the first switch ($CK$) and the first inverter ($Inv_1$) would be \"dynamic.\" When the switch $CK$ opens, the logic level at that node is stored only as an electrical charge on the gate capacitance of $Inv_1$. Over time, this charge would leak away due to subthreshold leakage currents, causing the circuit to lose its state.\n\nBy adding the red inverter, a **cross-coupled inverter pair** (a latch) is formed. This creates a positive feedback loop that actively drives the node to either VDD or Ground, allowing the circuit to hold its data indefinitely as long as power is supplied. This significantly improves the **robustness and reliability** of the circuit.\n\n### 2. Contention and Write Speed\nWhen the switch $CK$ is closed to write a new value into the latch, the incoming signal must \"fight\" against the red inverter to change the state of the node.\n*   **Performance Hit:** This contention causes a slight delay in switching and increases power consumption during the transition (due to short-circuit current).\n*   **Design Solution:** To minimize this negative impact, the red inverter is typically designed to be **\"weak\"** (having a much lower drive strength or higher resistance than the input driver). This ensures the new input can easily overpower the feedback and change the state quickly.\n\n### 3. Noise Immunity\nThe red inverter improves the circuit's **noise margin**. In a dynamic design, a small noise spike could easily flip the state of a floating node. With the red inverter providing active feedback, the circuit is much more resistant to electrical noise and alpha particles (soft errors), as the feedback loop will \"pull\" the node back to its intended logic level.\n\n### Summary\n*   **Positive Effect:** It makes the circuit **static**, preventing data loss from leakage and significantly increasing **noise immunity**.\n*   **Negative Effect:** It introduces a small amount of **contention**, which can slightly increase **power consumption** and **propagation delay** during a write operation.",
        "format": "markdown",
        "sha256": "51b46f563e8e9ece95899376a7b46fd72d784aa7e99be35f76880e1fdf18d831"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a keeper forming a static latch. It misses the actual feedforward path that bypasses part of the first latch, speeds high-rate operation, and raises the minimum usable clock frequency at low rates.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 2148,
        "total_tokens": 3226,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1657,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 2148,
        "total_tokens": 3226,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1657,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the red inverter is connected in a **feed-forward** (or look-ahead) configuration across the master stage of the flip-flop. It is in parallel with the main path consisting of the $CK$-controlled switch and the first inverter ($Inv_1$).\n\nHere is how it affects the performance of the circuit:\n\n### 1. Reduced Propagation Delay and Setup Time\nThe primary purpose of adding such a path is to **improve speed**. By providing an additional, often faster path for the signal to reach the master stage's output, the overall propagation delay from the input to the intermediate node is reduced. This directly leads to a **shorter setup time** ($t_{setup}$), meaning the input data can arrive closer to the clock edge and still be correctly captured.\n\n### 2. Increased Maximum Operating Frequency\nSince the total cycle time of a sequential circuit is limited by the sum of the clock-to-Q delay, the logic delay, and the setup time ($T_{min} = t_{ck-to-q} + t_{logic} + t_{setup}$), reducing the setup time allows the circuit to operate at a **higher clock frequency**.\n\n### 3. Improved Drive Strength\nThe red inverter acts in parallel with $Inv_1$ when the $CK$ switch is closed. This effectively increases the drive strength at the master stage's output node, allowing it to charge or discharge the capacitance of the following stage (the $\\overline{CK}$ switch and the slave stage) more quickly.\n\n### 4. Trade-offs in Power and Area\nWhile it improves speed, the red inverter also has some negative impacts on performance metrics:\n*   **Increased Power Consumption:** Adding an extra inverter increases the total switching capacitance, leading to higher dynamic power consumption.\n*   **Increased Area:** The additional circuitry takes up more space on the silicon die.\n*   **Potential for \"Feed-through\":** If the red inverter is not carefully sized (e.g., if it is too strong), it could cause the master stage to be insufficiently \"opaque\" when the clock is low, potentially leading to race conditions or unintended state changes. In high-performance designs, this red inverter is often a \"weak\" or \"clocked\" inverter to mitigate these issues.\n\n### Summary\nIn short, the red inverter is a **speed-up technique** designed to **reduce setup time and propagation delay**, thereby allowing the flip-flop to function correctly at **higher speeds**.",
        "format": "markdown",
        "sha256": "a01824225d1d83c0972dad366c7d1743f7d0acddb521993ccab80fdbbbf54e0c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the feedforward path and its speed benefit, but omits the key low-frequency drawback: the unclocked branch can overpower the main path and raise the minimum usable clock frequency. Some setup-time and drive-strength claims are also not established by the circuit.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 12393,
        "total_tokens": 13471,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 12393,
        "total_tokens": 13471,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the figure is a **feedback inverter**, and its primary role is to convert a \"dynamic\" latch into a **\"static\" latch**.\n\nHere is a breakdown of how it affects the performance and behavior of the circuit:\n\n### 1. Static Data Storage (Reliability)\nWithout the red inverter, the node between the first switch ($CK$) and the first inverter ($Inv_1$) would be \"dynamic.\" When the switch $CK$ opens, the logic level at that node is stored only as an electrical charge on the gate capacitance of $Inv_1$. Over time, this charge would leak away due to subthreshold leakage currents, causing the circuit to lose its state.\n\nBy adding the red inverter, a **cross-coupled inverter pair** (a latch) is formed. This creates a positive feedback loop that actively drives the node to either VDD or Ground, allowing the circuit to hold its data indefinitely as long as power is supplied. This significantly improves the **robustness and reliability** of the circuit.\n\n### 2. Contention and Write Speed\nWhen the switch $CK$ is closed to write a new value into the latch, the incoming signal must \"fight\" against the red inverter to change the state of the node.\n*   **Performance Hit:** This contention causes a slight delay in switching and increases power consumption during the transition (due to short-circuit current).\n*   **Design Solution:** To minimize this negative impact, the red inverter is typically designed to be **\"weak\"** (having a much lower drive strength or higher resistance than the input driver). This ensures the new input can easily overpower the feedback and change the state quickly.\n\n### 3. Noise Immunity\nThe red inverter improves the circuit's **noise margin**. In a dynamic design, a small noise spike could easily flip the state of a floating node. With the red inverter providing active feedback, the circuit is much more resistant to electrical noise and alpha particles (soft errors), as the feedback loop will \"pull\" the node back to its intended logic level.\n\n### Summary\n*   **Positive Effect:** It makes the circuit **static**, preventing data loss from leakage and significantly increasing **noise immunity**.\n*   **Negative Effect:** It introduces a small amount of **contention**, which can slightly increase **power consumption** and **propagation delay** during a write operation.",
        "format": "markdown",
        "sha256": "51b46f563e8e9ece95899376a7b46fd72d784aa7e99be35f76880e1fdf18d831"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a keeper forming a static latch. It misses the actual feedforward path that bypasses part of the first latch, speeds high-rate operation, and raises the minimum usable clock frequency at low rates.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 2148,
        "total_tokens": 3226,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1657,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 2148,
        "total_tokens": 3226,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1657,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "I **partially agree** with the answer, but it is technically incomplete or incorrect regarding the entire circuit's behavior.\n\n### Analysis of the Circuit\nThe circuit shown is a **Master-Slave Flip-Flop** configured as a **Toggle Flip-Flop (T-FF)**. \n*   **Master Stage:** Consists of the $CK$ switch and inverter $Inv_1$.\n*   **Slave Stage:** Consists of the $\\overline{CK}$ switch and inverters $Inv_2$ and $Inv_3$.\n*   **Feedback:** The output of $Inv_3$ is fed back to the input of the master stage, creating a toggle behavior every clock cycle.\n\n### Evaluation of the Claim\n1.  **\"The red inverter acts as a keeper, forming a cross-coupled latch with $Inv_1$.\"**\n    *   **I agree.** The red inverter is connected in a back-to-back configuration with $Inv_1$. When the $CK$ switch is open, this pair forms a static latch that holds the current state. Without it, the input to $Inv_1$ would be a floating node, relying on parasitic capacitance to hold its charge (dynamic storage).\n\n2.  **\"This removes the minimum clock frequency requirement due to leakage.\"**\n    *   **I disagree.** While the red inverter makes the **master stage** static, the **slave stage** (the node between the $\\overline{CK}$ switch and $Inv_2$) is still dynamic. \n    *   When $CK$ is high, the $\\overline{CK}$ switch is open. The input to $Inv_2$ is floating and will eventually lose its state due to leakage currents. If the clock stays high for too long, the slave stage will fail, and the feedback signal to the master will become corrupted.\n    *   Therefore, the circuit as a whole **still has a minimum clock frequency requirement**. To make the entire circuit fully static, a second keeper would be required for the slave stage.\n\n### The Actual Role of the Red Inverter\nThe actual role of the red inverter is to provide **static storage for the master stage**. \n*   It ensures that when the $CK$ switch is open, the logic level at the input of $Inv_1$ is actively driven to $V_{DD}$ or $GND$ rather than floating. \n*   In a practical implementation, this red inverter must be \"weak\" (having high output impedance) so that the driving stage (the output of $Inv_3$) can easily overpower it and flip the state of the latch when the $CK$ switch closes.",
        "format": "markdown",
        "sha256": "9ff05ce9b8989e7cd0bfecef888c3f7454ca3020202cb7011c4e8026aad4c678"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly treats the red inverter as a cross-coupled keeper and says it stores the input to Inv1. It misses the actual feedforward branch, which bypasses part of the latch path and can cause low-frequency failure by overpowering the intended latch behavior.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 9951,
        "total_tokens": 11076,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 9951,
        "total_tokens": 11076,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "I **partially agree** with the answer provided, but it is incomplete and contains a common technical oversight regarding the circuit's overall behavior.\n\n### 1. Do I agree with the answer?\n*   **Agreement:** I agree that the red inverter acts as a **keeper** and forms a **cross-coupled latch** with $Inv_1$. This is a standard technique in VLSI design to convert a dynamic latch into a static (or semi-static) one.\n*   **Disagreement:** I disagree that it *completely* removes the minimum clock frequency requirement for the entire circuit. While it makes the **master stage** (the first part) static, the **slave stage** (the second part, consisting of the two inverters after the $\\overline{CK}$ switch) remains **dynamic**.\n\n### 2. The Actual Role of the Red Inverter\nThe red inverter's primary role is to provide **feedback** to maintain the state of the node at the input of $Inv_1$ when the $CK$ switch is open.\n\n*   **Static Operation (Master Stage):** Without the red inverter, when the $CK$ switch opens, the input to $Inv_1$ is a \"floating\" node. Charge stored on the gate capacitance would eventually leak away, causing the circuit to lose its state. This is why purely dynamic circuits have a minimum clock frequency. The red inverter \"keeps\" the state by constantly driving the input with the inverted output of $Inv_1$, creating a stable latch.\n*   **Weakness Requirement:** For this circuit to function correctly, the red inverter must be **\"weak\"** (designed with high-resistance, small transistors). If it were a standard-strength inverter, it would \"fight\" the signal coming through the $CK$ switch, potentially preventing the latch from ever switching states or causing high power consumption during transitions.\n\n### 3. The \"Gotcha\": Why the circuit is still semi-dynamic\nThe figure shows a **T-Flip-Flop** (a toggle flip-flop or divide-by-2 circuit) because the output is fed back to the input. \n*   When $CK$ is high (and $\\overline{CK}$ is low), the master stage is transparent, but the **slave stage is floating**. \n*   Because there is no keeper on the slave stage (the node after the $\\overline{CK}$ switch), the charge there will still leak. \n*   Therefore, you **cannot** stop the clock indefinitely with $CK$ in the high state. The circuit only removes the minimum frequency requirement for the phase where $CK$ is low. To make the entire flip-flop truly static, a second keeper would be needed for the slave stage.",
        "format": "markdown",
        "sha256": "01d2a7b2cd472d3d2f17e671f7b7b790bd77c21f16a105883b26aca1ad46c72c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer repeats the incorrect keeper/cross-coupled-latch interpretation and misses the red inverter’s actual feedforward role. It therefore also misses the key tradeoff: the branch can improve high-speed operation but can overpower the intended latch behavior at low clock rates, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 7784,
        "total_tokens": 8909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7208,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 7784,
        "total_tokens": 8909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7208,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "I **partially agree** with the answer provided, but with an important technical clarification regarding the entire circuit's behavior.\n\n### 1. Do I agree with the answer?\n**Yes, in principle.** The identification of the red inverter as a **keeper** is correct. It is a standard design technique in digital integrated circuits to convert a \"dynamic\" latch into a \"static\" one.\n\n*   **\"Acts as a keeper\":** Correct. A keeper is a weak inverter used to maintain the voltage level of a node that would otherwise be floating.\n*   **\"Forming a cross-coupled latch with $Inv_1$\":** Correct. By connecting the output of $Inv_1$ back to its input through another inverter, you create a bistable element (a latch) that can hold its state indefinitely.\n*   **\"Removes the minimum clock frequency requirement\":** This is **partially correct**. It removes the requirement for the *master* stage of this flip-flop. However, as explained below, the circuit as drawn might still have a limitation.\n\n---\n\n### 2. What is the actual role of the red inverter?\nThe actual role of the red inverter is to **provide a static feedback path to maintain the state of the master latch** when the $CK$ switch is open.\n\nHere is a breakdown of how it works in this specific circuit (which appears to be a master-slave T-flip-flop or divide-by-2 circuit):\n\n*   **When $CK$ is High (Sampling Phase):** The $CK$ switch is closed, and the master stage ($Inv_1$) samples the feedback from the end of the chain. The red inverter is \"fighting\" this new data, so it must be designed as a **\"weak\" inverter** (using long-channel or narrow transistors) so that the main signal path can easily overdrive it and change the state of the latch.\n*   **When $CK$ is Low (Hold Phase):** The $CK$ switch opens. Without the red inverter, the input to $Inv_1$ would be a \"floating\" node. Over time, charge would leak off the gate capacitance of $Inv_1$, eventually causing the circuit to lose its state. The red inverter prevents this by actively driving the node to either VDD or Ground, allowing the circuit to hold its data even if the clock stops completely (DC operation).\n\n### The \"Catch\":\nFor the **entire circuit** to be truly static and completely remove the minimum clock frequency requirement, the **slave stage** (the part with $Inv_2$ and $Inv_3$) would also need a keeper. \n\nIn the diagram, when $CK$ is high, the $\\overline{CK}$ switch is open, leaving the input to $Inv_2$ floating. If the clock stays high for too long, the slave stage will lose its value due to leakage. Therefore, while the red inverter makes the *master* stage static, the overall circuit as drawn is \"semi-static\" and may still technically have a minimum clock frequency requirement depending on which clock phase it stops in.",
        "format": "markdown",
        "sha256": "635be8fcbbdc23974c204e4ff792f4c161bf9f58a9ab1188c442329b247fae1c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly endorses the keeper and cross-coupled-latch interpretation. The red inverter is a feedforward branch that bypasses part of the latch path; it can aid high-speed operation but can overpower the intended behavior at low clock rates, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 7070,
        "total_tokens": 8195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6413,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 7070,
        "total_tokens": 8195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6413,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the Noise Figure (NF) of the CMOS inverter-based Low Noise Amplifier (LNA) shown in the figure while maintaining a constant input resistance ($R_{in} = 50\\ \\Omega$), we must analyze the relationship between the circuit parameters, the input impedance, and the noise sources.\n\n### 1. Input Resistance ($R_{in}$)\nFor this shunt-feedback topology, the input resistance can be approximated by the following formula (assuming the open-loop gain $A_v$ is large):\n$$R_{in} \\approx \\frac{R_F + R_L}{1 + G_m R_L}$$\nwhere:\n*   $G_m = g_{m1} + g_{m2}$ is the total transconductance of the NMOS ($M_1$) and PMOS ($M_2$) transistors.\n*   $R_F$ is the feedback resistor.\n*   $R_L$ is the load resistance at the output (which includes the output resistances $r_{o1}, r_{o2}$ and any subsequent stage).\n\nIf we assume a typical case where the gain is high and $R_F$ is the dominant feedback path, a common simplification is $R_{in} \\approx \\frac{R_F}{1 + |A_v|}$. To keep $R_{in}$ fixed at $50\\ \\Omega$, any increase in the gain ($|A_v| \\approx G_m R_L$) must be accompanied by a proportional increase in $R_F$.\n\n### 2. Noise Figure (NF)\nThe Noise Factor ($F$) for this circuit is approximately given by:\n$$F \\approx 1 + \\frac{\\gamma}{G_m R_S} + \\frac{R_S}{R_F}$$\nwhere:\n*   $R_S$ is the source resistance ($50\\ \\Omega$).\n*   $\\gamma$ is the thermal noise coefficient of the MOS transistors (typically $\\approx 2/3$ for long-channel and higher for short-channel devices).\n*   The term $\\frac{\\gamma}{G_m R_S}$ represents the noise contribution from the transistors $M_1$ and $M_2$.\n*   The term $\\frac{R_S}{R_F}$ represents the noise contribution from the feedback resistor $R_F$.\n\n### 3. Optimization Strategy\nTo minimize the Noise Figure (NF), we need to minimize both the transistor noise and the feedback resistor noise.\n\n1.  **Increase $G_m$:** By increasing the transconductance $G_m$, the term $\\frac{\\gamma}{G_m R_S}$ decreases. This is achieved by increasing the bias current ($I_D$) and/or increasing the widths ($W$) of transistors $M_1$ and $M_2$.\n2.  **Increase $R_F$:** By increasing the feedback resistance, the term $\\frac{R_S}{R_F}$ decreases. A larger $R_F$ injects less thermal noise into the input node.\n3.  **Maintain $R_{in} = 50\\ \\Omega$:** As we increase $G_m$ to reduce noise, the input resistance $R_{in} \\approx \\frac{R_F}{1 + G_m R_L}$ would naturally decrease if $R_F$ stayed the same. Therefore, to keep $R_{in}$ at $50\\ \\Omega$, we **must increase $R_F$ simultaneously** with $G_m$.\n\n### Conclusion\nTo optimize the circuit for the lowest Noise Figure while keeping $R_{in} = 50\\ \\Omega$:\n*   **Maximize the transconductance ($G_m$):** Use as much bias current and transistor width as the power budget and bandwidth requirements allow.\n*   **Increase the feedback resistor ($R_F$):** Adjust $R_F$ upwards to satisfy the $50\\ \\Omega$ matching condition as $G_m$ increases.\n\n**The fundamental trade-off:** Lowering the Noise Figure in this topology requires higher power consumption (to increase $G_m$) and potentially results in lower bandwidth (due to the increased parasitic capacitances of larger transistors).",
        "format": "markdown",
        "sha256": "3acf2f89cc3c996442b5152f7df6e8d01620e911f750a00f0c8babbee4b73965"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It includes the finite-output-resistance input-match relation and correctly recommends increasing transconductance while raising RF to preserve 50 Ω, which allows NF to improve beyond the 1 + γ limit. Its approximate noise expression supports the same trend.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 5408,
        "total_tokens": 6524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4490,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 5408,
        "total_tokens": 6524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4490,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the Noise Figure (NF) of the CMOS inverter-based Low Noise Amplifier (LNA) shown in the figure while maintaining a constant input resistance ($R_{in} = 50\\ \\Omega$), we must analyze the relationship between the circuit parameters, the input impedance, and the noise sources.\n\n### 1. Input Resistance ($R_{in}$)\nFor this shunt-feedback topology, the input resistance can be approximated by the following formula (assuming the open-loop gain $A_v$ is large):\n$$R_{in} \\approx \\frac{R_F + R_L}{1 + G_m R_L}$$\nwhere:\n*   $G_m = g_{m1} + g_{m2}$ is the total transconductance of the NMOS ($M_1$) and PMOS ($M_2$) transistors.\n*   $R_F$ is the feedback resistor.\n*   $R_L$ is the load resistance at the output (which includes the output resistances $r_{o1}, r_{o2}$ and any subsequent stage).\n\nIf we assume a typical case where the gain is high and $R_F$ is the dominant feedback path, a common simplification is $R_{in} \\approx \\frac{R_F}{1 + |A_v|}$. To keep $R_{in}$ fixed at $50\\ \\Omega$, any increase in the gain ($|A_v| \\approx G_m R_L$) must be accompanied by a proportional increase in $R_F$.\n\n### 2. Noise Figure (NF)\nThe Noise Factor ($F$) for this circuit is approximately given by:\n$$F \\approx 1 + \\frac{\\gamma}{G_m R_S} + \\frac{R_S}{R_F}$$\nwhere:\n*   $R_S$ is the source resistance ($50\\ \\Omega$).\n*   $\\gamma$ is the thermal noise coefficient of the MOS transistors (typically $\\approx 2/3$ for long-channel and higher for short-channel devices).\n*   The term $\\frac{\\gamma}{G_m R_S}$ represents the noise contribution from the transistors $M_1$ and $M_2$.\n*   The term $\\frac{R_S}{R_F}$ represents the noise contribution from the feedback resistor $R_F$.\n\n### 3. Optimization Strategy\nTo minimize the Noise Figure (NF), we need to minimize both the transistor noise and the feedback resistor noise.\n\n1.  **Increase $G_m$:** By increasing the transconductance $G_m$, the term $\\frac{\\gamma}{G_m R_S}$ decreases. This is achieved by increasing the bias current ($I_D$) and/or increasing the widths ($W$) of transistors $M_1$ and $M_2$.\n2.  **Increase $R_F$:** By increasing the feedback resistance, the term $\\frac{R_S}{R_F}$ decreases. A larger $R_F$ injects less thermal noise into the input node.\n3.  **Maintain $R_{in} = 50\\ \\Omega$:** As we increase $G_m$ to reduce noise, the input resistance $R_{in} \\approx \\frac{R_F}{1 + G_m R_L}$ would naturally decrease if $R_F$ stayed the same. Therefore, to keep $R_{in}$ at $50\\ \\Omega$, we **must increase $R_F$ simultaneously** with $G_m$.\n\n### Conclusion\nTo optimize the circuit for the lowest Noise Figure while keeping $R_{in} = 50\\ \\Omega$:\n*   **Maximize the transconductance ($G_m$):** Use as much bias current and transistor width as the power budget and bandwidth requirements allow.\n*   **Increase the feedback resistor ($R_F$):** Adjust $R_F$ upwards to satisfy the $50\\ \\Omega$ matching condition as $G_m$ increases.\n\n**The fundamental trade-off:** Lowering the Noise Figure in this topology requires higher power consumption (to increase $G_m$) and potentially results in lower bandwidth (due to the increased parasitic capacitances of larger transistors).",
        "format": "markdown",
        "sha256": "3acf2f89cc3c996442b5152f7df6e8d01620e911f750a00f0c8babbee4b73965"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It includes the finite-output-resistance input-match relation and correctly recommends increasing transconductance while raising RF to preserve 50 Ω, which allows NF to improve beyond the 1 + γ limit. Its approximate noise expression supports the same trend.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 5408,
        "total_tokens": 6524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4490,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 5408,
        "total_tokens": 6524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4490,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the **Noise Figure (NF)** of the CMOS inverter-based Low-Noise Amplifier (LNA) shown in the figure while maintaining a constant input resistance ($R_{in} = 50\\ \\Omega$), we must analyze the trade-offs between transconductance, feedback resistance, and gain.\n\n### 1. Input Resistance Constraint\nThe circuit is a shunt-shunt feedback amplifier. Its input resistance is approximately given by:\n$$R_{in} \\approx \\frac{R_F}{1 + |A_v|}$$\nwhere $|A_v| \\approx (g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$ is the open-loop voltage gain of the inverter. To keep $R_{in} = 50\\ \\Omega$, any increase in the gain $|A_v|$ must be balanced by a proportional increase in the feedback resistor $R_F$.\n\n### 2. Noise Figure Analysis\nThe Noise Factor ($F$) for this topology can be approximated as:\n$$F \\approx 1 + \\frac{R_S}{R_F} + \\frac{\\gamma}{g_m R_S}$$\nwhere:\n*   $R_S = 50\\ \\Omega$ is the source resistance.\n*   $g_m = g_{m1} + g_{m2}$ is the total transconductance of the NMOS and PMOS transistors.\n*   $\\gamma$ is the thermal noise coefficient of the MOSFETs (typically $\\approx 2/3$ for long-channel and higher for short-channel devices).\n\n### 3. Optimization Strategy\nTo minimize the NF, we need to reduce the two noise-contributing terms in the equation above:\n\n*   **Increase $g_m$:** The term $\\frac{\\gamma}{g_m R_S}$ represents the thermal noise of the transistors. By increasing the bias current and the widths of $M_1$ and $M_2$, we increase $g_m$, which directly lowers this noise contribution.\n*   **Increase $R_F$:** The term $\\frac{R_S}{R_F}$ represents the thermal noise of the feedback resistor. A larger $R_F$ contributes less noise when referred to the input. \n*   **Maintain $R_{in}$:** As we increase $g_m$, the open-loop gain $|A_v|$ naturally increases. To satisfy the $R_{in} = 50\\ \\Omega$ constraint, we **must** increase $R_F$ accordingly ($R_F \\approx 50 \\times (1 + |A_v|)$).\n\n### Summary of Steps for Optimization:\n1.  **Maximize Transconductance ($g_m$):** Increase the widths of $M_1$ and $M_2$ and the bias current as much as the power budget and bandwidth requirements allow. This is the most effective way to reduce the dominant transistor noise.\n2.  **Increase Feedback Resistance ($R_F$):** Simultaneously increase $R_F$ to maintain the $50\\ \\Omega$ match. Because $|A_v|$ increases with $g_m$, $R_F$ can be made very large, which effectively \"hides\" its noise contribution.\n3.  **Trade-offs:** The practical limit to this optimization is **power consumption** (due to high $g_m$) and **bandwidth** (due to the large parasitic capacitances of wide transistors and the large $R_F$ creating a low-frequency pole at the input/output).",
        "format": "markdown",
        "sha256": "1b9800e2eb1b740c22bd21f1e0d41f4a33346301bd6a5e8b00049e48a0244e59"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the correct strategy: increase gm and raise RF with it to preserve the 50-ohm match, allowing transistor noise to fall below the 1 + gamma limit. The input-resistance relation is approximate rather than the exact finite-ro expression, but the optimization trend and conclusion are correct.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 4977,
        "total_tokens": 6093,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 4977,
        "total_tokens": 6093,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance $R_{\\text{in}}$ of the circuit, we will analyze it stage by stage and then apply the principles of feedback.\n\n### 1. Circuit Analysis\nThe circuit consists of two main stages with a feedback resistor $R_F$ connected from the output to the input.\n*   **Stage 1 ($M_1$):** This is an NMOS common-source amplifier. The input is at the gate (node $P$) and the output is at the drain (node $X$).\n    *   The small-signal gain of this stage is $A_{v1} = \\frac{v_X}{v_P} = -g_{m1} R_{D1}$ (assuming the output resistance $r_{o1}$ is much larger than $R_{D1}$).\n*   **Stage 2 ($M_2, M_3$):** This is a PMOS differential pair. The input is at the gate of $M_2$ (node $X$), and the output is taken from the drain of $M_3$ ($V_{\\text{out}}$). The gate of $M_3$ is at AC ground ($V_b$).\n    *   The small-signal current $i_{d3}$ produced by $M_3$ in response to $v_X$ is:\n        $i_{d3} = \\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}} v_X$\n    *   If we assume $M_2$ and $M_3$ are matched ($g_{m2} = g_{m3} = g_{m2,3}$), then $i_{d3} = \\frac{1}{2} g_{m2,3} v_X$.\n    *   The open-loop gain of this stage (without feedback loading) is $A_{v2} = \\frac{v_{\\text{out}}}{v_X} = \\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}} R_{D2}$.\n\n### 2. Open-Loop Gain\nThe total open-loop voltage gain $A_v$ from node $P$ to $V_{\\text{out}}$ is the product of the gains of the two stages:\n$$A_v = A_{v1} \\cdot A_{v2} = (-g_{m1} R_{D1}) \\cdot \\left( \\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}} R_{D2} \\right) = -\\frac{g_{m1} g_{m2} g_{m3} R_{D1} R_{D2}}{g_{m2} + g_{m3}}$$\nThe negative sign indicates that the feedback is negative.\n\n### 3. Input Impedance with Feedback\nThe input impedance $R_{\\text{in}}$ is measured looking into node $P$. The feedback resistor $R_F$ is in a shunt-shunt configuration. Using nodal analysis at node $P$ and $V_{\\text{out}}$:\n1.  The input current is $i_{\\text{in}} = \\frac{v_P - v_{\\text{out}}}{R_F}$ (since the gate current of $M_1$ is zero).\n2.  At the output node $V_{\\text{out}}$, KCL gives: $i_{d3} = \\frac{v_{\\text{out}}}{R_{D2}} + \\frac{v_{\\text{out}} - v_P}{R_F}$.\n3.  Substituting $i_{d3} = \\left( \\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}} \\right) v_X = \\left( \\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}} \\right) (-g_{m1} R_{D1} v_P)$ and solving for $v_{\\text{out}}$ in terms of $v_P$:\n    $$v_{\\text{out}} = v_P \\left( \\frac{R_{D2}}{R_F + R_{D2}} - \\frac{g_{m1} g_{m2} g_{m3} R_{D1} (R_{D2} \\parallel R_F)}{g_{m2} + g_{m3}} \\right)$$\n4.  The input resistance is $R_{\\text{in}} = \\frac{v_P}{i_{\\text{in}}} = \\frac{R_F}{1 - v_{\\text{out}}/v_P}$.\n\nSubstituting the expression for $v_{\\text{out}}/v_P$ and simplifying, we get:\n$$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + g_{m1} R_{D1} R_{D2} \\left( \\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}} \\right)}$$\n\n### Final Result\nIf we assume the differential pair transistors are matched ($g_{m2} = g_{m3} = g_{m2,3}$), the input impedance is:\n$$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}}$$\nNote: The capacitor $C_{\\text{in}}$ is external to the point where $R_{\\text{in}}$ is measured. If the total input impedance $Z_{\\text{in}}$ including $C_{\\text{in}}$ is required, it would be $Z_{\\text{in}}(s) = R_{\\text{in}} \\parallel \\frac{1}{s C_{\\text{in}}}$.",
        "format": "markdown",
        "sha256": "a555a82905578e2f799776775068aa10edb58f540ef2e09375cd7e0b0333069e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The final expression matches the exact result, including the output-side resistance: (RF + RD2)/(1 + A0), with A0 = ½ gm1 gm2,3 RD1 RD2 for a matched pair.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 12498,
        "total_tokens": 13601,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11197,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 12498,
        "total_tokens": 13601,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11197,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance $R_{\\text{in}}$ of the circuit, we will analyze it as a shunt-shunt feedback amplifier.\n\n### 1. Circuit Analysis\n*   **Stage 1 ($M_1$):** Transistor $M_1$ is an NMOS in a common-source configuration. Its voltage gain from node $P$ to node $X$ is:\n    $$A_{v1} = \\frac{V_X}{V_P} = -g_{m1}(R_{D1} \\parallel r_{o1}) \\approx -g_{m1}R_{D1}$$\n    (assuming $r_{o1} \\gg R_{D1}$).\n*   **Stage 2 ($M_2, M_3$):** Transistors $M_2$ and $M_3$ form a PMOS differential pair. The input $V_X$ is applied to the gate of $M_2$, and the gate of $M_3$ is biased at a constant voltage $V_b$ (AC ground). The output $V_{\\text{out}}$ is taken from the drain of $M_3$. For a matched pair ($g_{m2} = g_{m3} = g_{m2,3}$), the gain from $V_X$ to $V_{\\text{out}}$ is:\n    $$A_{v2} = \\frac{V_{\\text{out}}}{V_X} = \\frac{1}{2}g_{m2,3}(R_{D2} \\parallel r_{o3}) \\approx \\frac{1}{2}g_{m2,3}R_{D2}$$\n    (assuming $r_{o3} \\gg R_{D2}$).\n*   **Total Open-Loop Gain ($A_v$):** The total voltage gain from the input node $P$ to the output $V_{\\text{out}}$ is:\n    $$A_v = A_{v1} \\cdot A_{v2} = (-g_{m1}R_{D1}) \\cdot \\left(\\frac{1}{2}g_{m2,3}R_{D2}\\right) = -\\frac{1}{2}g_{m1}g_{m2,3}R_{D1}R_{D2}$$\n\n### 2. Input Resistance ($R_{\\text{in}}$)\nThe feedback resistor $R_F$ is connected between the output and the input node $P$. According to the Miller effect, the input resistance looking into node $P$ (excluding $C_{\\text{in}}$) is given by:\n$$R_{\\text{in}} = \\frac{R_F}{1 - A_v}$$\nSubstituting the expression for $A_v$:\n$$R_{\\text{in}} = \\frac{R_F}{1 + \\frac{1}{2}g_{m1}g_{m2,3}R_{D1}R_{D2}}$$\nIf we perform a more rigorous nodal analysis that accounts for the loading of $R_F$ on the output node, the exact expression for the input resistance is:\n$$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2}g_{m1}g_{m2,3}R_{D1}R_{D2}}$$\nIn most practical cases where the loop gain is high and $R_F \\gg R_{D2}$, this simplifies to the Miller approximation above.\n\n### 3. Total Input Impedance ($Z_{\\text{in}}$)\nThe total input impedance includes the effect of the input capacitor $C_{\\text{in}}$, which is in parallel with the resistance $R_{\\text{in}}$:\n$$Z_{\\text{in}}(s) = R_{\\text{in}} \\parallel \\frac{1}{sC_{\\text{in}}} = \\frac{R_{\\text{in}}}{1 + sR_{\\text{in}}C_{\\text{in}}}$$\nSubstituting the simplified $R_{\\text{in}}$:\n$$Z_{\\text{in}}(s) = \\frac{R_F}{\\left(1 + \\frac{1}{2}g_{m1}g_{m2,3}R_{D1}R_{D2}\\right) + sR_FC_{\\text{in}}}$$\n\n**Final Answer:**\nThe low-frequency input resistance is approximately:\n$$R_{\\text{in}} \\approx \\frac{R_F}{1 + \\frac{1}{2}g_{m1}g_{m2,3}R_{D1}R_{D2}}$$",
        "format": "markdown",
        "sha256": "d00d0952d1c3845ac96851a6d647b25dbf1e94882c79ccf837cc0283c86e6fbc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer gives the exact result, Rin = (RF + RD2)/(1 + A0), with the correct unloaded gain A0. Its later RF >> RD2 approximation is consistent with the stated condition.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 19110,
        "total_tokens": 20213,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 19110,
        "total_tokens": 20213,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance $R_{in}$ of the given circuit, we can analyze it as a multi-stage amplifier with shunt-shunt (voltage-current) feedback.\n\n### 1. Identify the Circuit Stages\nThe circuit consists of two main gain stages:\n*   **Stage 1:** A common-source amplifier formed by NMOS transistor $M_1$ and load resistor $R_{D1}$.\n*   **Stage 2:** A differential amplifier formed by PMOS transistors $M_2$ and $M_3$ with a tail current source $I_{SS}$. The output is taken single-endedly from the drain of $M_3$ at node $V_{out}$, with load resistor $R_{D2}$.\n*   **Feedback:** A feedback resistor $R_F$ connects the output node $V_{out}$ back to the input node $P$.\n\n### 2. Calculate the Open-Loop Gain ($A_v$)\nThe open-loop gain $A_v = \\frac{V_{out}}{V_P}$ is the gain from the input node $P$ to the output node $V_{out}$ when the feedback loop is broken but loading effects are considered.\n\n*   **Gain of Stage 1 ($V_X / V_P$):**\n    Assuming the output resistance of $M_1$ ($r_{o1}$) is much larger than $R_{D1}$, the gain is:\n    $$A_{v1} = \\frac{V_X}{V_P} \\approx -g_{m1} R_{D1}$$\n\n*   **Gain of Stage 2 ($V_{out} / V_X$):**\n    For a differential pair with a single-ended output, the gain from one gate to the opposite drain is $\\frac{1}{2} g_m R_{load}$. Here, the input is at the gate of $M_2$ and the output is at the drain of $M_3$. Including the loading of $R_F$ on the output:\n    $$A_{v2} = \\frac{V_{out}}{V_X} \\approx \\frac{1}{2} g_{m2,3} (R_{D2} \\parallel R_F)$$\n    *(Note: The gain is positive because an increase in $V_X$ decreases the current in $M_2$, thereby increasing the current in $M_3$ and raising $V_{out}$.)*\n\n*   **Total Open-Loop Gain:**\n    $$A_v = A_{v1} \\cdot A_{v2} = -g_{m1} R_{D1} \\cdot \\left[ \\frac{1}{2} g_{m2,3} (R_{D2} \\parallel R_F) \\right] = -\\frac{1}{2} g_{m1} g_{m2,3} R_{D1} (R_{D2} \\parallel R_F)$$\n\n### 3. Compute the Input Resistance ($R_{in}$)\nThe input resistance $R_{in}$ looking into node $P$ (excluding $C_{in}$) can be found using Miller's Theorem. Since the gate of $M_1$ draws no current, the input resistance is entirely determined by the feedback resistor $R_F$ \"Miller-multiplied\" by the gain:\n$$R_{in} = \\frac{R_F}{1 - A_v}$$\n\nSubstituting the expression for $A_v$:\n$$R_{in} = \\frac{R_F}{1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} (R_{D2} \\parallel R_F)}$$\n\nIf we assume $R_F \\gg R_{D2}$, the expression simplifies to:\n$$R_{in} \\approx \\frac{R_F}{1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}}$$\n\n### 4. Total Input Impedance ($Z_{in}$)\nIf the question requires the total impedance including the input capacitance $C_{in}$, they are in parallel:\n$$Z_{in}(s) = \\frac{1}{s C_{in}} \\parallel R_{in} = \\frac{R_{in}}{1 + s C_{in} R_{in}}$$\n\n**Final Result:**\nThe input resistance $R_{in}$ as indicated in the figure is:\n$$R_{in} = \\frac{R_F}{1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} (R_{D2} \\parallel R_F)}$$",
        "format": "markdown",
        "sha256": "535c1f023a512fd9365216d1db14793a8488870b27daf376e25919a0b901edeb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the feedback topology and Miller reduction, but its final expression uses a loaded gain with RD2 || RF and misses the exact output-side resistance. The required result is Rin = (RF + RD2)/(1 + A0), so the central calculation is incorrect.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 8876,
        "total_tokens": 9979,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7845,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 8876,
        "total_tokens": 9979,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7845,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise resulting from the LDO's thermal noise, you need to follow a process based on the concept of **supply pushing**.\n\nThe LDO's thermal noise ($S_{th}$) manifests as voltage fluctuations on the supply line ($V_{out}$). Because the oscillation frequency of a practical VCO depends on its supply voltage, these voltage fluctuations cause frequency fluctuations, which ultimately result in phase noise.\n\nHere is the step-by-step procedure:\n\n### 1. Determine the Supply Pushing Factor ($K_{push}$)\nThe first step is to characterize how sensitive the VCO's frequency is to changes in the supply voltage. This is known as the supply pushing factor, $K_{push}$.\n*   **Definition:** $K_{push} = \\frac{\\partial f_{osc}}{\\partial V_{out}}$ (measured in Hz/V).\n*   **How to find it:** This is typically done via circuit simulation (e.g., SPICE). You sweep the LDO output voltage $V_{out}$ by a small amount (e.g., $\\pm 10\\text{--}50\\text{ mV}$) around its nominal value and measure the resulting change in the oscillation frequency $f_{osc}$. The slope of this curve is $K_{push}$.\n\n### 2. Calculate the Frequency Noise Spectrum\nThe LDO's voltage noise spectral density $S_{LDO}(f)$ (which you've called $S_{th}$, in $V^2/Hz$) is converted into frequency noise spectral density $S_{\\Delta f}(f)$ through the pushing factor. Since power spectral density scales with the square of the gain:\n$$S_{\\Delta f}(f_m) = K_{push}^2 \\cdot S_{LDO}(f_m)$$\n*   Where $f_m$ is the offset frequency from the carrier.\n*   Units: $\\text{Hz}^2/\\text{Hz}$.\n\n### 3. Convert Frequency Noise to Phase Noise\nPhase is the integral of frequency. In the frequency domain, integration corresponds to a $1/f$ operation for amplitude, or a $1/f^2$ operation for power spectral density. The phase noise spectrum $S_{\\phi}(f_m)$ is related to the frequency noise spectrum by:\n$$S_{\\phi}(f_m) = \\frac{S_{\\Delta f}(f_m)}{f_m^2} = \\frac{K_{push}^2 \\cdot S_{LDO}(f_m)}{f_m^2}$$\n*   Units: $\\text{rad}^2/\\text{Hz}$.\n\n### 4. Express in Standard Phase Noise Units ($\\mathcal{L}$)\nPhase noise is most commonly expressed in $\\text{dBc/Hz}$ (decibels relative to the carrier per Hertz). By convention, $\\mathcal{L}(f_m)$ represents the noise in one sideband, which is half of the total phase fluctuations:\n$$\\mathcal{L}(f_m) = 10 \\log_{10} \\left( \\frac{1}{2} S_{\\phi}(f_m) \\right)$$\nSubstituting the previous equation:\n$$\\mathcal{L}(f_m) = 10 \\log_{10} \\left( \\frac{K_{push}^2 \\cdot S_{LDO}(f_m)}{2 \\cdot f_m^2} \\right)$$\n\n### Summary of the Calculation\nTo get the final phase noise contribution from the LDO:\n1.  **Simulate/Measure $K_{push}$** of the VCO.\n2.  **Obtain the noise PSD $S_{LDO}(f_m)$** of the LDO at the specific offset frequency of interest.\n3.  **Apply the formula:** $\\mathcal{L}(f_m) = 10 \\log_{10}(S_{LDO}) + 20 \\log_{10}(K_{push}) - 20 \\log_{10}(f_m) - 3\\text{ dB}$.\n\n**Note:** This calculation only accounts for the noise *injected* by the LDO. The total phase noise of the system will be the power sum of this LDO-induced noise and the VCO's intrinsic phase noise (caused by $M_1, M_2$, the tank resistors, and the current source $I_{VCO}$).",
        "format": "markdown",
        "sha256": "fa6d7c7ce50569449e82752d223cbdaefbbea85ed851dbc5fc236fdfead570de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly uses supply pushing to convert the LDO noise to frequency noise and applies the 1/offset-frequency-squared FM-to-phase-noise conversion with the appropriate single-sideband factor. It omits the circuit-specific insight that supply perturbations act directly on the varactors, making Kpush closely related to KVCO and lower KVCO beneficial.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 2002,
        "total_tokens": 3128,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 2002,
        "total_tokens": 3128,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise resulting from the LDO's thermal noise, you need to follow a process that characterizes how supply voltage fluctuations translate into frequency fluctuations. This mechanism is known as **supply pushing**.\n\nHere is the step-by-step procedure:\n\n### 1. Determine the Supply Pushing Figure ($K_{push}$)\nThe first step is to quantify how sensitive the VCO's oscillation frequency ($f_{osc}$) is to changes in the supply voltage ($V_{out}$). This sensitivity is called the supply pushing figure, denoted as $K_{push}$:\n\n$$K_{push} = \\frac{\\partial f_{osc}}{\\partial V_{out}} \\quad \\text{[units: Hz/V]}$$\n\nIn the circuit shown, $V_{out}$ affects the frequency because:\n*   The parasitic capacitances of the cross-coupled pair ($M_1, M_2$) are voltage-dependent.\n*   The average voltage across the varactors ($M_{v1}, M_{v2}$) changes with $V_{out}$, altering their effective capacitance.\n*   If the tail current source $I_{VCO}$ has finite output impedance, changes in $V_{out}$ change the tail current, which in turn changes the transconductance and parasitic capacitances of the switching pair.\n\nYou can find $K_{push}$ via simulation by performing a DC sweep of $V_{out}$ and measuring the resulting change in the steady-state oscillation frequency.\n\n### 2. Relate Supply Noise to Frequency Fluctuations\nThe LDO generates thermal noise with a power spectral density (PSD) of $S_{th}(f)$ (units: $V^2/Hz$). This voltage noise causes a corresponding noise in the instantaneous frequency of the VCO.\n\nThe PSD of the frequency fluctuations, $S_{\\Delta f}(f)$, is calculated by multiplying the voltage noise PSD by the square of the pushing figure:\n\n$$S_{\\Delta f}(f) = K_{push}^2 \\cdot S_{th}(f) \\quad \\text{[units: } Hz^2/Hz]$$\n\n### 3. Compute the Phase Noise\nPhase noise, $\\mathcal{L}(\\Delta f)$, is defined as the ratio of the noise power in a 1-Hz bandwidth at an offset frequency $\\Delta f$ from the carrier to the total carrier power. \n\nThere is a fundamental mathematical relationship between frequency fluctuations and phase noise: phase is the integral of frequency, which in the frequency domain corresponds to a $1/f^2$ relationship.\n\nThe phase noise at an offset frequency $\\Delta f$ is given by:\n\n$$\\mathcal{L}(\\Delta f) = \\frac{S_{\\Delta f}(\\Delta f)}{2 (\\Delta f)^2}$$\n\nSubstituting the expression from Step 2:\n\n$$\\mathcal{L}(\\Delta f) = \\frac{K_{push}^2 \\cdot S_{th}(\\Delta f)}{2 (\\Delta f)^2}$$\n\n### Summary of the Calculation\nTo get the final value in the standard units of **dBc/Hz**:\n\n1.  **Simulate/Measure $K_{push}$** in Hz/V.\n2.  **Identify $S_{th}$** of the LDO at the specific offset frequency $\\Delta f$ (in $V^2/Hz$).\n3.  **Plug into the formula:** $\\mathcal{L}(\\Delta f) = 10 \\log_{10} \\left( \\frac{K_{push}^2 \\cdot S_{th}(\\Delta f)}{2 (\\Delta f)^2} \\right)$\n\n**Note:** This calculation only accounts for the noise contribution from the LDO. The total phase noise of the VCO will be the power sum of this contribution and the intrinsic phase noise generated by the VCO's own components (inductors, transistors, and varactors).",
        "format": "markdown",
        "sha256": "6ba990e5c2324649570a344c6f1583155f9dcbd463fc05ba2ea3a76eb8a7a456"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly derives supply-pushing frequency noise and the 1/Δf² phase-noise relation. It mentions the varactors but omits the key circuit-specific insight that Kpush is closely related to KVCO, so reducing KVCO reduces this noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 1826,
        "total_tokens": 2952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1018,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 1826,
        "total_tokens": 2952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1018,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise resulting from the LDO's thermal noise, we follow a three-step process: determining the supply sensitivity, relating voltage noise to frequency noise, and finally converting frequency noise to phase noise.\n\n### 1. Determine the Supply Sensitivity ($K_{pushing}$)\nThe first step is to quantify how sensitive the VCO's oscillation frequency ($f_{osc}$) is to changes in the supply voltage ($V_{out}$). This is known as the **supply pushing factor**, denoted as $K_{pushing}$:\n$$K_{pushing} = \\frac{\\partial f_{osc}}{\\partial V_{out}} \\quad [\\text{Hz/V}]$$\n\nIn the provided circuit, $V_{out}$ affects the frequency primarily through the varactors ($M_{v1}, M_{v2}$). Since the inductors $L_1$ have negligible DC resistance, the average DC voltage at nodes $X$ and $Y$ is approximately $V_{out}$. The voltage across the varactors is $V_{var} \\approx V_{out} - V_{cont}$. \nBecause the frequency depends on $V_{out} - V_{cont}$, the sensitivity to the supply is approximately equal and opposite to the sensitivity to the control voltage ($K_{VCO}$):\n$$K_{pushing} \\approx -K_{VCO}$$\n*(Note: Other factors like the parasitic capacitances of $M_1, M_2$ also change with $V_{out}$, which may add to or subtract from this value.)*\n\n### 2. Relate Supply Noise to Frequency Noise\nThe thermal noise from the LDO, represented by the power spectral density $S_{th}(f)$ (in $V^2/Hz$), causes instantaneous fluctuations in the oscillation frequency. The power spectral density of these frequency fluctuations, $S_{\\Delta f}(f)$, is:\n$$S_{\\Delta f}(f) = K_{pushing}^2 \\cdot S_{th}(f) \\quad [\\text{Hz}^2/\\text{Hz}]$$\n\n### 3. Compute the Phase Noise\nPhase is the integral of frequency. In the frequency domain, integration corresponds to a $1/f$ operation for amplitude, or a $1/f^2$ operation for power spectral density. The single-sideband phase noise $\\mathcal{L}(\\Delta f)$ at an offset frequency $\\Delta f$ is given by:\n$$\\mathcal{L}(\\Delta f) = \\frac{S_{\\Delta f}(\\Delta f)}{2 \\Delta f^2}$$\n\nSubstituting the expression from Step 2:\n$$\\mathcal{L}(\\Delta f) = \\frac{K_{pushing}^2 \\cdot S_{th}(\\Delta f)}{2 \\Delta f^2}$$\n\n### Summary of the Calculation\nTo find the phase noise at a specific offset $\\Delta f$:\n1.  **Measure or simulate $K_{pushing}$**: Change $V_{out}$ by a small amount and observe the change in $f_{osc}$.\n2.  **Obtain $S_{th}(\\Delta f)$**: This is the noise floor of your LDO at the frequency corresponding to the offset $\\Delta f$.\n3.  **Apply the formula**: Plug the values into $\\mathcal{L}(\\Delta f) = \\frac{K_{pushing}^2 S_{th}}{2 \\Delta f^2}$.\n\n**Key Insight:** Because of the $1/\\Delta f^2$ term, even low-level thermal noise from an LDO can significantly degrade phase noise at close-in offsets if the VCO has a high pushing factor. This is why high-performance VCOs often require LDOs with extremely low noise and high power supply rejection ratios (PSRR).",
        "format": "markdown",
        "sha256": "f7a7158244e22cedf2be2818beb1d118e3fb8bc940e770aff4159c6439c59dae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, relates LDO voltage-noise PSD to frequency-noise PSD through dfosc/dVout, and applies the 1/Δf² FM-to-phase-noise conversion. It also captures the varactor/KVCO connection; the sign and exact normalization are secondary.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 3002,
        "total_tokens": 4128,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 3002,
        "total_tokens": 4128,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a tail capacitor ($C_T$) to the tail node ($P$) of a cross-coupled LC oscillator generally **improves (decreases) the phase noise**, provided its value is chosen correctly.\n\nHere is a breakdown of why this happens:\n\n### 1. Filtering Tail Current Noise\nThe most significant contribution to phase noise from the tail current source ($I_{SS}$) comes from noise frequencies around **$2\\omega_0$** (twice the oscillation frequency). Due to the switching action of the differential pair ($M_1, M_2$), noise at $2\\omega_0$ is down-converted (folded) directly into the fundamental oscillation frequency $\\omega_0$. \n*   The capacitor $C_T$ acts as a low-pass filter that shunts this high-frequency noise from the current source to ground before it can be up-converted by the switching transistors.\n\n### 2. Reducing Tail Node Voltage Swing\nIn a typical oscillator, node $P$ experiences a voltage ripple at $2\\omega_0$. This ripple can interact with the parasitic capacitances of the tail current source, leading to further noise injection. \n*   $C_T$ provides a low-impedance path to ground at $2\\omega_0$, effectively making node $P$ an **AC ground** for the second harmonic. This stabilizes the tail voltage and reduces the conversion of common-mode noise into differential phase noise.\n\n### 3. Important Trade-off (The \"Too Much\" Caveat)\nWhile $C_T$ helps filter the current source noise, if it is made **excessively large**, it can actually degrade phase noise:\n*   **Increased Transistor Noise:** A very large $C_T$ holds node $P$ at a nearly constant DC voltage. During the switching transition, this can cause both $M_1$ and $M_2$ to carry more current simultaneously for a longer period. This increases the time the transistors spend in their high-noise region (saturation), potentially increasing their thermal noise contribution to the tank.\n*   **Current Spikes:** It can lead to sharp current spikes during switching, which may increase the noise power at higher harmonics.\n\n**Summary:** In practical RF design, a tail capacitor is almost always used to **reduce phase noise** by filtering the tail current source's noise at $2\\omega_0$. Designers often tune this node (sometimes using a \"tail filter\" with an inductor) to maximize the impedance at $2\\omega_0$ or simply use a large enough $C_T$ to shunt the noise.",
        "format": "markdown",
        "sha256": "71d8c9ba4e3dd4a666dd68f25bdd51f36983e8fb358d91009f00385c312d7a64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It acknowledges a generic tradeoff—filtering may help, while excessive capacitance may hurt—but misses the key mechanisms: class-C switching with peak tank currents above ISS, flicker-noise upconversion, triode operation, or low-frequency instability. Its claim that CT almost always reduces phase noise overstates the benefit.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 1609,
        "total_tokens": 2709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1062,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 1609,
        "total_tokens": 2709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1062,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor $C_T$ to the tail node (node $P$) of a cross-coupled LC oscillator generally **increases the phase noise**.\n\nHere is a detailed explanation of why this happens:\n\n### 1. The Role of the Tail Node\nIn a differential cross-coupled oscillator, the tail node $P$ is a common-mode node. In an ideal, perfectly balanced circuit, it would stay at a constant DC voltage. However, in a real oscillator, the transistors $M_1$ and $M_2$ switch on and off, causing the voltage at node $P$ to fluctuate at twice the oscillation frequency ($2\\omega_0$).\n\n### 2. Noise Injection and the \"Switching\" Region\nThe phase noise of an oscillator is most sensitive to noise injected during the \"zero-crossings\" of the differential output voltage—the moments when $M_1$ and $M_2$ are both conducting and switching current from one side to the other. During this brief interval, the two transistors act like a differential pair.\n\n### 3. Effect of $C_T$ on Transistor Noise\n*   **Without $C_T$:** The tail current source $I_{SS}$ ideally presents a very high impedance at node $P$. This high impedance acts as **source degeneration** for transistors $M_1$ and $M_2$. Source degeneration reduces the transconductance ($g_m$) of the transistors for noise, thereby suppressing the amount of thermal noise they inject into the LC tank during the critical switching period.\n*   **With $C_T$:** Adding a large capacitor $C_T$ shunts node $P$ to ground at high frequencies. This effectively turns node $P$ into an **AC ground**. Without the high-impedance degeneration, the transistors $M_1$ and $M_2$ can inject their full thermal noise current into the tank. Because this happens exactly when the oscillator is most sensitive to noise (the zero-crossings), the phase noise increases significantly.\n\n### 4. Noise Upconversion\nWhile $C_T$ might help filter out high-frequency noise from the current source $I_{SS}$ itself, this benefit is usually outweighed by the increased noise from the switching transistors. Furthermore, a low impedance at node $P$ at $2\\omega_0$ facilitates the upconversion of low-frequency noise to the oscillation frequency.\n\n### Summary\nIn modern RF design, instead of adding a capacitor, designers often use a **\"tail resonance\"** technique. They place an inductor in series with the tail current source, tuned to resonate with the parasitic capacitance at node $P$ at $2\\omega_0$. This creates a very high impedance at the second harmonic, maximizing the degeneration effect and **minimizing** phase noise. Adding $C_T$ does the opposite by creating a low impedance, thus **increasing** phase noise.",
        "format": "markdown",
        "sha256": "ff7205cdb0138cede27786a0a57007dee194ae849db669716ccce1d8d527bb02"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes low-frequency-noise upconversion as a possible degradation mechanism, but incorrectly presents the effect as generally monotonic and misses the class-C improvement and the nonmonotonic dependence on CT.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2466,
        "total_tokens": 3566,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2466,
        "total_tokens": 3566,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor $C_T$ to the tail node of a cross-coupled LC oscillator generally **increases the phase noise**.\n\nHere is a detailed explanation of why this happens:\n\n### 1. The Role of the Tail Node\nIn a differential LC oscillator, the tail node (node $P$) is not a true virtual ground. Because the transistors $M_1$ and $M_2$ switch on and off every half-cycle, the voltage at node $P$ naturally oscillates at twice the fundamental frequency ($2\\omega_0$). \n\n### 2. The \"Current Pulse\" Effect\nWhen you add a large capacitor $C_T$ to the tail node, you are effectively creating an AC ground at that node for high frequencies. \n*   **Without $C_T$:** The total current $i_{M1} + i_{M2}$ is limited by the tail current source $I_{SS}$. During the switching transition (when both transistors are partially on), the tail node voltage drops, which helps limit the current flow through the transistors.\n*   **With $C_T$:** The capacitor acts as a local energy reservoir. During the switching transition, when both $M_1$ and $M_2$ are on, they can draw a large \"spike\" or pulse of current from $C_T$ that is much higher than the nominal $I_{SS}$.\n\n### 3. Impact on Phase Noise (ISF Theory)\nAccording to the **Impulse Sensitivity Function (ISF)** theory of phase noise:\n*   An oscillator is most sensitive to noise during its zero-crossings (the switching transitions). This is when the ISF is at its maximum.\n*   The thermal noise generated by the transistors $M_1$ and $M_2$ is proportional to their transconductance ($g_m$), which in turn increases with the instantaneous current flowing through them.\n*   Because $C_T$ allows for much larger current pulses exactly when the circuit is most sensitive to noise, the amount of noise converted into phase noise increases significantly.\n\n### 4. Summary of Trade-offs\nWhile $C_T$ does help filter out high-frequency noise coming from the tail current source $I_{SS}$ itself, this benefit is usually far outweighed by the increased noise contribution from the switching transistors $M_1$ and $M_2$. \n\nIn high-performance oscillator design, engineers often try to **minimize** the parasitic capacitance at the tail node or use a \"noise filter\" (a combination of an inductor and capacitor tuned to $2\\omega_0$) to present a high impedance at the tail node instead of a low one.",
        "format": "markdown",
        "sha256": "e275465d32e6563f189cff1837843d0c6f4bc6da82ffe3c96cfb6463fe9268c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that adding CT generally worsens phase noise and recommends minimizing it, missing the essential non-monotonic behavior and the class-C mechanism that can reduce phase noise. Its current-pulse/thermal-noise argument does not capture the specific degradation mechanisms in the golden solution.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2422,
        "total_tokens": 3522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1100,
        "output_tokens": 2422,
        "total_tokens": 3522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Quadrature LC Oscillator (QVCO)**. It consists of two identical differential LC oscillator stages that are cross-coupled to each other to produce four output signals ($X_1, Y_1, X_2, Y_2$) that are $90^\\circ$ out of phase with each other (in quadrature).\n\n### 1. Circuit Analysis\n*   **LC Tanks:** Each stage has a resonant tank formed by the inductors ($L$) and the parasitic capacitances at the nodes ($C$). The resonance frequency of an unperturbed tank is $\\omega_0 = \\frac{1}{\\sqrt{LC}}$.\n*   **Cross-Coupled Pairs:** The inner NMOS transistors in each stage provide the negative resistance necessary to cancel the losses in the LC tanks and sustain oscillation.\n*   **Coupling Pairs:** The outer NMOS transistors (driven by the other stage) inject current from one stage into the other. This coupling forces the two stages to oscillate at the same frequency but with a $90^\\circ$ phase shift.\n\n### 2. Estimating the Frequency\nIn a QVCO, the injected quadrature current acts like an additional reactive component, which shifts the oscillation frequency slightly away from the tank's natural resonance frequency.\n\nThe oscillation frequency $f_{osc}$ can be estimated as:\n$$f_{osc} \\approx \\frac{1}{2\\pi\\sqrt{LC}}$$\n\nWhere:\n*   **$L$** is the inductance of one of the inductors in the tank.\n*   **$C$** is the total capacitance at each node ($X_1, Y_1$, etc.), which includes the parasitic capacitances of the transistors ($C_{gs}, C_{gd}, C_{db}$) and the inductor itself.\n\n### 3. Refined Estimate (Frequency Shift)\nMore accurately, the coupling causes a frequency shift $\\Delta \\omega$ given by:\n$$\\omega_{osc} \\approx \\omega_0 \\pm \\frac{g_{mc}}{2C}$$\nor in terms of the quality factor $Q$ and transconductances:\n$$f_{osc} \\approx f_0 \\left( 1 \\pm \\frac{1}{2Q} \\cdot \\frac{g_{mc}}{g_m} \\right)$$\nwhere $g_{mc}$ is the transconductance of the coupling transistors (controlled by $I_1$) and $g_m$ is the transconductance of the cross-coupled transistors (controlled by $I_{SS}$).\n\n**Conclusion:**\nWithout specific component values, the best estimate for the oscillation frequency is the resonance frequency of the LC tank:\n$$f \\approx \\frac{1}{2\\pi\\sqrt{LC}}$$",
        "format": "markdown",
        "sha256": "7d1a6938aafae2592254918c85f6b5e5c0e28d5c1a70259d3eb6bb14f374c4f4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the tank resonance and the correct general shift proportional to (gmc/gm)/(2Q). However, it also presents gmc/(2C) as an unqualified alternative; that expression requires the edge-of-oscillation assumption gmRp = 1.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 7391,
        "total_tokens": 8494,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 7391,
        "total_tokens": 8494,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Quadrature LC Oscillator (QVCO)**. It consists of two identical differential LC oscillators that are cross-coupled to each other to generate four output phases ($0^\\circ, 90^\\circ, 180^\\circ, 270^\\circ$) at nodes $X_1, Y_1, X_2, Y_2$.\n\n### 1. Basic Resonance Frequency\nEach stage of the oscillator contains an LC tank. The oscillation frequency is primarily determined by the resonance frequency of these tanks. If we denote the inductance of each inductor as $L$ and the total capacitance at each output node (including parasitic capacitances of the transistors) as $C$, the natural resonance frequency $\\omega_0$ is:\n$$\\omega_0 = \\frac{1}{\\sqrt{LC}}$$\nIn terms of hertz, the frequency $f_0$ is:\n$$f_0 = \\frac{1}{2\\pi\\sqrt{LC}}$$\n\n### 2. Frequency Shift due to Coupling\nIn a QVCO, the coupling transistors (the outer differential pairs biased by current $I_1$) inject current from one stage into the other with a specific phase relationship. This coupling forces the two oscillators to maintain a $90^\\circ$ phase shift but also causes the actual oscillation frequency $\\omega_{osc}$ to shift away from the natural resonance frequency $\\omega_0$.\n\nThe estimated oscillation frequency can be expressed as:\n$$\\omega_{osc} \\approx \\omega_0 \\pm \\frac{g_{mc}}{2C}$$\nwhere:\n*   **$g_{mc}$** is the transconductance of the coupling transistors (controlled by current $I_1$).\n*   **$C$** is the total capacitance at each node.\n\nThe \"$\\pm$\" sign indicates that the circuit can theoretically oscillate at two different frequencies, although in practice, one mode is usually more stable or favored by the circuit's start-up dynamics.\n\n### Summary Estimate\nFor a quick estimate, the oscillation frequency is approximately:\n$$f \\approx \\frac{1}{2\\pi\\sqrt{LC}}$$\nA more precise estimate accounting for the quadrature coupling is:\n$$f \\approx \\frac{1}{2\\pi\\sqrt{LC}} \\left( 1 \\pm \\frac{1}{2Q} \\cdot \\frac{I_{coupling}}{I_{oscillation}} \\right)$$\nwhere $Q$ is the quality factor of the LC tank. In many practical designs, the frequency shift is roughly $5\\%-10\\%$ of the center frequency.",
        "format": "markdown",
        "sha256": "bc63b6ad388ed704d80082fb3193214959dcb36462a3322e7d2d33873ab8dba5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the tank resonance and the correct coupling-shift form in its summary, approximately αω0/(2Q). However, it also presents an unqualified shift of gmc/(2C), which is valid only at the edge-of-oscillation condition and conflicts with the general estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 9610,
        "total_tokens": 10713,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9059,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 9610,
        "total_tokens": 10713,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9059,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-3-flash-preview",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit topology shown in the figure, we can estimate the oscillation frequency by identifying the type of oscillator and its operating principles.\n\n### 1. Circuit Identification\nThe circuit is a **Quadrature LC Oscillator (QVCO)**. It consists of two identical differential LC oscillators (top and bottom stages) that are coupled together.\n* Each stage has a **cross-coupled pair** (the inner transistors) biased by current $I_{SS}$, which provides the negative resistance necessary to sustain oscillation.\n* Each stage also has a **coupling pair** (the outer transistors) biased by current $I_1$, which injects current from the other stage to force a specific phase relationship.\n* The LC tanks (inductors and parasitic/load capacitances) at nodes $X_1, Y_1$ and $X_2, Y_2$ determine the fundamental resonance frequency.\n\n### 2. Natural Resonance Frequency\nIf the two stages were not coupled ($I_1 = 0$), each would oscillate at its natural resonance frequency:\n$$\\omega_0 = \\frac{1}{\\sqrt{LC}}$$\nwhere $L$ is the inductance and $C$ is the total capacitance at each output node.\n\n### 3. Frequency Shift due to Coupling\nIn a quadrature oscillator, the coupling forces the two stages to oscillate with a $90^\\circ$ phase shift relative to each other. This coupling causes the actual oscillation frequency $\\omega$ to shift away from the natural resonance frequency $\\omega_0$.\n\nUsing a first-order approximation for a parallel-coupled QVCO, the frequency shift is determined by the ratio of the coupling transconductance ($g_{m,coup}$) to the cross-coupled transconductance ($g_{m,cross}$), and the quality factor ($Q$) of the LC tanks:\n$$\\omega \\approx \\omega_0 \\left( 1 \\pm \\frac{1}{2Q} \\cdot \\frac{g_{m,coup}}{g_{m,cross}} \\right)$$\n\nSince the transconductance $g_m$ is generally proportional to the bias current (or its square root, depending on the transistor region), we can estimate the frequency in terms of the given bias currents $I_{SS}$ and $I_1$:\n$$\\omega \\approx \\omega_0 \\left( 1 \\pm \\frac{1}{2Q} \\cdot \\frac{I_1}{I_{SS}} \\right)$$\n\n### Summary Estimate\nThe oscillation frequency of the circuit is approximately:\n$$f \\approx \\frac{1}{2\\pi\\sqrt{LC}} \\left( 1 \\pm \\frac{1}{2Q} \\cdot \\frac{I_1}{I_{SS}} \\right)$$\n\n*   **$\\omega_0 = 1/\\sqrt{LC}$** is the primary estimate if coupling is weak or $Q$ is very high.\n*   The **$\\pm$** sign indicates that the circuit can theoretically oscillate at two different frequencies, though in practice, one is typically favored by the circuit's start-up dynamics.\n*   The term **$\\frac{1}{2Q} \\frac{I_1}{I_{SS}}$** represents the \"frequency pulling\" effect caused by the quadrature coupling.",
        "format": "markdown",
        "sha256": "5b12a4e445e061d87068d55a8cab97d846f6478f81380d71244f5b33b1a8eefc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the tank resonance and the coupling-induced shift in the required form, using either the transconductance ratio or the large-signal current ratio I1/ISS. The minor comment about startup favoring one mode does not change the correct estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 9615,
        "total_tokens": 10718,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8925,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1103,
        "output_tokens": 9615,
        "total_tokens": 10718,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8925,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    }
  ]
}
