{
  "model_key": "gemini_4_argon",
  "display_name": "Gemini 4 Argon",
  "provider": "google",
  "evaluation_model_ids": [],
  "thinking_effort": "high",
  "configuration_note": "Gemini 4 Argon answered the 50 tasks in three rollouts through OpenRouter's chat completions route (google/gemini-4-argon) at reasoning effort high, the highest it offers. Requests set temperature to 0 and max_tokens to 943,718, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Gemini 4 Argon on 2026-11-10 ($2.00 input, $0.10 cached input, $10.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 133,
          "incorrect_count": 17,
          "partial_credit_count": 17,
          "zero_count": 0,
          "mean_score_0_to_4": 3.7933333333333334,
          "score_percent": 94.83333333333334,
          "score_distribution": {
            "1": 4,
            "2": 6,
            "3": 7,
            "4": 133
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 133,
          "incorrect_count": 17,
          "partial_credit_count": 17,
          "zero_count": 0,
          "mean_score_0_to_4": 3.7933333333333334,
          "score_percent": 94.83333333333334,
          "score_distribution": {
            "1": 4,
            "2": 6,
            "3": 7,
            "4": 133
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 86,
          "incorrect_count": 4,
          "partial_credit_count": 4,
          "zero_count": 0,
          "mean_score_0_to_4": 3.933333333333333,
          "score_percent": 98.33333333333333,
          "score_distribution": {
            "2": 2,
            "3": 2,
            "4": 86
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 86,
          "incorrect_count": 4,
          "partial_credit_count": 4,
          "zero_count": 0,
          "mean_score_0_to_4": 3.933333333333333,
          "score_percent": 98.33333333333333,
          "score_distribution": {
            "2": 2,
            "3": 2,
            "4": 86
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 47,
          "incorrect_count": 13,
          "partial_credit_count": 13,
          "zero_count": 0,
          "mean_score_0_to_4": 3.5833333333333335,
          "score_percent": 89.58333333333334,
          "score_distribution": {
            "1": 4,
            "2": 4,
            "3": 5,
            "4": 47
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 47,
          "incorrect_count": 13,
          "partial_credit_count": 13,
          "zero_count": 0,
          "mean_score_0_to_4": 3.5833333333333335,
          "score_percent": 89.58333333333334,
          "score_distribution": {
            "1": 4,
            "2": 4,
            "3": 5,
            "4": 47
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 43,
        "incorrect_count": 7,
        "partial_credit_count": 7,
        "zero_count": 0,
        "mean_score_0_to_4": 3.74,
        "score_percent": 93.5,
        "score_distribution": {
          "1": 2,
          "2": 2,
          "3": 3,
          "4": 43
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 46,
        "incorrect_count": 4,
        "partial_credit_count": 4,
        "zero_count": 0,
        "mean_score_0_to_4": 3.82,
        "score_percent": 95.5,
        "score_distribution": {
          "1": 1,
          "2": 3,
          "4": 46
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 44,
        "incorrect_count": 6,
        "partial_credit_count": 6,
        "zero_count": 0,
        "mean_score_0_to_4": 3.82,
        "score_percent": 95.5,
        "score_distribution": {
          "1": 1,
          "2": 1,
          "3": 4,
          "4": 44
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 0,
        "input_tokens": 164463,
        "output_tokens": 786188,
        "total_tokens": 950651
      },
      "known_totals": {
        "cached_input_tokens": 0,
        "input_tokens": 164463,
        "output_tokens": 786188,
        "total_tokens": 950651
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.933333333333333,
          "score_percent": 98.33333333333333,
          "score_distribution": {
            "2": 1,
            "4": 29
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.933333333333333,
          "score_percent": 98.33333333333333,
          "score_distribution": {
            "2": 1,
            "4": 29
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 28,
          "incorrect_count": 2,
          "partial_credit_count": 2,
          "zero_count": 0,
          "mean_score_0_to_4": 3.933333333333333,
          "score_percent": 98.33333333333333,
          "score_distribution": {
            "3": 2,
            "4": 28
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 14,
          "incorrect_count": 6,
          "partial_credit_count": 6,
          "zero_count": 0,
          "mean_score_0_to_4": 3.45,
          "score_percent": 86.25,
          "score_distribution": {
            "1": 2,
            "2": 1,
            "3": 3,
            "4": 14
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 17,
          "incorrect_count": 3,
          "partial_credit_count": 3,
          "zero_count": 0,
          "mean_score_0_to_4": 3.65,
          "score_percent": 91.25,
          "score_distribution": {
            "1": 1,
            "2": 2,
            "4": 17
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 16,
          "incorrect_count": 4,
          "partial_credit_count": 4,
          "zero_count": 0,
          "mean_score_0_to_4": 3.65,
          "score_percent": 91.25,
          "score_distribution": {
            "1": 1,
            "2": 1,
            "3": 2,
            "4": 16
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, **its intrinsic gain will approximately double** (assuming standard long-channel behavior and unchanged biasing conditions).\n\nHere is the step-by-step breakdown of why this happens.\n\n### 1. Definition of Intrinsic Gain\nThe intrinsic gain ($A_0$) of a MOSFET is the maximum possible low-frequency voltage gain the transistor can achieve. It is the product of its transconductance ($g_m$) and its output resistance ($r_o$):\n$$A_0 = g_m r_o$$\n\n### 2. Effect on the Aspect Ratio ($W/L$) and Biasing\nWhen you double both dimensions ($W \\rightarrow 2W$ and $L \\rightarrow 2L$), the aspect ratio remains unchanged:\n$$\\frac{2W}{2L} = \\frac{W}{L}$$\n\nIn standard circuit design, a transistor is biased using either a fixed current source ($I_D$) or a fixed Gate-Source voltage ($V_{GS}$). Because the $W/L$ ratio has not changed, **both the drain current ($I_D$) and the overdrive voltage ($V_{ov} = V_{GS} - V_{TH}$) remain constant.**\n\n### 3. Effect on Transconductance ($g_m$)\nThe equation for transconductance is:\n$$g_m = \\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) I_D}$$\n\nSince the $W/L$ ratio and the drain current $I_D$ are both unchanged, **the transconductance ($g_m$) remains the same.**\n\n### 4. Effect on Output Resistance ($r_o$)\nThe output resistance is determined by the drain current and the channel-length modulation parameter ($\\lambda$):\n$$r_o = \\frac{1}{\\lambda I_D}$$\n\nThe parameter $\\lambda$ is inversely proportional to the length of the channel ($\\lambda \\propto 1/L$). Physically, a longer channel makes the transistor less sensitive to the \"shrinking\" of the channel caused by changes in drain-source voltage ($V_{DS}$). \n\nTherefore, if you double the length ($2L$), you cut $\\lambda$ in half ($\\lambda / 2$). Since $I_D$ is constant:\n$$r_{o(\\text{new})} = \\frac{1}{(\\lambda / 2) I_D} = 2 r_o$$\n**The output resistance ($r_o$) doubles.**\n\n### Conclusion\nMultiplying the two results together gives the new intrinsic gain:\n$$A_{0(\\text{new})} = g_{m(\\text{new})} \\times r_{o(\\text{new})} = (g_m) \\times (2 r_o) = 2 A_0$$\n\n### Important Trade-off (Why don't we always do this?)\nIn analog circuit design, doubling both $W$ and $L$ is a very common trick to double the gain without changing the current consumption or voltage headroom. \n\nHowever, the penalty is **speed and area**. By doubling both $W$ and $L$, the gate area ($W \\times L$) increases by a **factor of 4**. This quadruples the parasitic gate capacitance ($C_{gs}$), which drastically reduces the transistor's transition frequency ($f_T$) and makes the circuit much slower.",
        "format": "markdown",
        "sha256": "81567ec6f2ec211f5a568557165a8f3fe345feee97207af7b192d2a93928c47f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that unchanged W/L and bias keep gm and ID approximately constant, while doubling L roughly doubles ro and intrinsic gain. The extra speed/area discussion does not undermine the main result.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 49,
        "output_tokens": 2510,
        "total_tokens": 2559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 49,
        "output_tokens": 2510,
        "total_tokens": 2559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the biasing conditions (drain current $I_D$ and gate-source voltage $V_{GS}$) are kept constant, **the intrinsic gain of the MOSFET will double.**\n\nHere is the step-by-step mathematical breakdown of why this happens using the standard square-law MOSFET model.\n\n### 1. Definition of Intrinsic Gain\nThe intrinsic gain ($A_v$) of a MOSFET is the maximum possible low-frequency voltage gain the transistor can achieve. It is the product of its transconductance ($g_m$) and its output resistance ($r_o$):\n$$A_v = g_m \\cdot r_o$$\n\n### 2. Effect on the Aspect Ratio ($W/L$)\nIf you double both the Width ($W$) and the Length ($L$), the aspect ratio remains unchanged:\n$$\\frac{W_{new}}{L_{new}} = \\frac{2W}{2L} = \\frac{W}{L}$$\n\nBecause the $W/L$ ratio does not change, the drain current ($I_D$) for a given gate-source voltage ($V_{GS}$) also remains unchanged.\n\n### 3. Effect on Transconductance ($g_m$)\nTransconductance is defined as:\n$$g_m = \\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) I_D}$$\n\nSince the $W/L$ ratio and the drain current $I_D$ are both unchanged, **$g_m$ remains constant.**\n\n### 4. Effect on Output Resistance ($r_o$)\nOutput resistance is caused by Channel Length Modulation ($\\lambda$) and is defined as:\n$$r_o = \\frac{1}{\\lambda I_D}$$\n\nThe channel length modulation parameter ($\\lambda$) is inversely proportional to the length of the channel ($\\lambda \\propto \\frac{1}{L}$). As the channel gets longer, the depletion region at the drain has a smaller relative effect on the total channel length. Therefore, we can rewrite $r_o$ as:\n$$r_o \\propto \\frac{L}{I_D}$$\n\nSince $L$ is doubled and $I_D$ remains constant, **the output resistance ($r_o$) doubles.**\n\n### 5. Conclusion\nCombining the two results into the intrinsic gain formula:\n$$A_{v(new)} = g_{m(new)} \\cdot r_{o(new)}$$\n$$A_{v(new)} = (g_m) \\cdot (2r_o) = 2 A_v$$\n\n**Summary:** Doubling both $W$ and $L$ keeps $g_m$ the same while doubling $r_o$, resulting in **double the intrinsic gain.**\n\n---\n\n### The Real-World Trade-Off (Why don't we always do this?)\nIn analog circuit design, doubling $W$ and $L$ is a very common technique used to increase gain and improve transistor matching. However, there is a major trade-off: **Speed.**\n\nThe gate capacitance ($C_{gg}$) is proportional to the gate area ($W \\times L$). By doubling both $W$ and $L$, you **quadruple the area** ($2W \\times 2L = 4WL$), which quadruples the parasitic capacitance. Because $g_m$ stayed the same and capacitance increased by 4x, the transit frequency ($f_T \\approx \\frac{g_m}{2\\pi C_{gg}}$) drops to one-fourth of its original value, making the circuit much slower.",
        "format": "markdown",
        "sha256": "9d4315fc8b77d325d62edba118c966d377b0e2d66a049195212a9d5f4932fef7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that keeping W/L and overdrive (and thus approximately ID and gm) unchanged while doubling L approximately doubles ro, so intrinsic gain doubles. The added speed trade-off is secondary and does not undermine the answer.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 49,
        "output_tokens": 2243,
        "total_tokens": 2292,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1476,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 49,
        "output_tokens": 2243,
        "total_tokens": 2292,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1476,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the bias conditions (drain current $I_D$ and gate-source voltage $V_{GS}$) are kept constant, **the intrinsic gain of the MOSFET will double.**\n\nHere is the step-by-step breakdown of why this happens using standard square-law MOSFET models.\n\n---\n\n### 1. Definition of Intrinsic Gain\nThe intrinsic gain ($A_0$) of a MOSFET is the maximum possible low-frequency voltage gain the transistor can achieve. It is the product of its transconductance ($g_m$) and its output resistance ($r_o$):\n$$A_0 = g_m \\cdot r_o$$\n\n### 2. Effect on the Aspect Ratio ($W/L$)\nIf you double both the Width ($W \\rightarrow 2W$) and the Length ($L \\rightarrow 2L$), the aspect ratio remains unchanged:\n$$\\frac{2W}{2L} = \\frac{W}{L}$$\nBecause $W/L$ is constant, a constant $V_{GS}$ automatically results in a constant drain current ($I_D$) and a constant overdrive voltage ($V_{OV} = V_{GS} - V_{TH}$).\n\n### 3. Effect on Transconductance ($g_m$)\nThe equation for transconductance is:\n$$g_m = \\sqrt{2 \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) I_D}$$\nSince the ratio $W/L$ did not change and $I_D$ is constant, **$g_m$ remains constant.**\n\n### 4. Effect on Output Resistance ($r_o$)\nThe output resistance is determined by Channel Length Modulation ($\\lambda$):\n$$r_o = \\frac{1}{\\lambda I_D}$$\nThe channel length modulation parameter $\\lambda$ is inversely proportional to the length of the channel ($\\lambda \\propto \\frac{1}{L}$). As the channel gets longer, the depletion region at the drain has a proportionally smaller effect on the overall channel. Therefore:\n$$r_o \\propto \\frac{L}{I_D}$$\nSince $L$ is doubled and $I_D$ is constant, **$r_o$ doubles ($2r_o$).**\n\n### 5. Conclusion\nCombining the two results into the intrinsic gain formula:\n$$A_{0\\text{, new}} = g_m \\cdot (2r_o) = 2(g_m r_o)$$\n\nBy doubling $W$ and $L$, **the intrinsic gain doubles.**\n\n---\n\n### The Trade-off (Why don't we always do this?)\nIn analog circuit design, doubling both $W$ and $L$ is a very common technique to increase gain without changing the DC biasing of the circuit. However, it comes with a major penalty in **speed**:\n* The gate area of the transistor is $W \\times L$. \n* By doubling both, the area increases by a factor of **4** ($2W \\times 2L = 4WL$).\n* This **quadruples the parasitic gate capacitance** ($C_{gs}$), which drastically reduces the bandwidth and the transit frequency ($f_T$) of the amplifier.",
        "format": "markdown",
        "sha256": "91085d9e2c7140c934724ed8c23a024ef91447461b50b3b50c8b169920f6ece4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling both dimensions leaves W/L and gm approximately unchanged while doubling ro, so intrinsic gain doubles. The stated bias assumptions and approximate channel-length-modulation scaling are appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 49,
        "output_tokens": 2817,
        "total_tokens": 2866,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2125,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 49,
        "output_tokens": 2817,
        "total_tokens": 2866,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2125,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In a classic engineering plot twist, **both Student A and Student B are correct**, depending on what else is being held constant in the circuit. \n\nThis is a famous dilemma in analog circuit design. To see why both are right, wehave to look at the two different equations used to calculate transconductance ($g_m$) for a MOSFET in the saturation region, where overdrive voltage is $V_{OV} = V_{GS} - V_{TH}$.\n\n---\n\n### Why Student A is Correct (Assuming a fixed transistor size)\nStudent A is looking at this equation:\n$$g_m = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) V_{OV}$$\n\n**The Scenario:** Imagine you have a single, physical MOSFET on a breadboard. Its physical dimensions—Width ($W$) and Length ($L$)—are fixed. If you increase the gate voltage, you increase $V_{OV}$. Because the transistor size cannot change, the drain current ($I_D$) increases, and therefore **$g_m$ goes up**. \n\n* **Constraint:** Fixed transistor size ($W/L$).\n* **Result:** Increasing $V_{OV}$ increases $I_D$, which **increases $g_m$**.\n\n---\n\n### Why Student B is Correct (Assuming a fixed current budget)\nStudent B is looking at this variation of the equation:\n$$g_m = \\frac{2 I_D}{V_{OV}}$$\n\n**The Scenario:** Imagine you are an integrated circuit designer creating a microchip. You are usually given a strict power budget, meaning your drain current ($I_D$) is fixed and cannot be changed. If you decide to increase $V_{OV}$ while keeping $I_D$ constant, you must mathematically decrease the size ($W/L$) of the transistor to compensate. Under these conditions, as $V_{OV}$ goes up, **$g_m$ goes down**.\n\n* **Constraint:** Fixed drain current ($I_D$).\n* **Result:** Increasing $V_{OV}$ requires shrinking $W/L$, which **decreases $g_m$**. \n\n*(Note: In modern analog design, Student B's perspective is often more useful. Designers talk about \"$g_m/I_D$\" or \"transconductance efficiency,\" which shows that to get the highest $g_m$ for a given amount of power, you want a **low** overdrive voltage).*\n\n---\n\n### A Bonus Point for Student B: Extreme Voltages\nEven in Student A's scenario (a fixed transistor size), if you increase $V_{OV}$ *too* much, Student B eventually becomes right again. At very high gate voltages, the strong electric field pulls electrons so hard against the silicon surface that they start bumping into it and slowing down (an effect called **mobility degradation**). At this extreme point, increasing $V_{OV}$ further will actually cause $g_m$ to drop. \n\n### Summary\n* **Student A** is testing a already-built circuit in a lab (Fixed $W/L$, variable $I_D$).\n* **Student B** is designing a new microchip on a computer with a strict power budget (Fixed $I_D$, variable $W/L$).",
        "format": "markdown",
        "sha256": "047165f0bf550422af3d1b03ca76d6407c39cdb7e62c2c0066d43c639ceef670"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed W/L and explains that increasing overdrive also raises drain current and gm. It correctly limits Student B’s result to fixed drain current; the added mobility-degradation caveat is secondary to the answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 60,
        "output_tokens": 1962,
        "total_tokens": 2022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1268,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 60,
        "output_tokens": 1962,
        "total_tokens": 2022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1268,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a classic trick question in electronics! The short answer is that **both students are correct**, depending on **what is being held constant**. \n\nTo understand why, we have to look at two different ways to write the equation for transconductance ($g_m$) in the saturation region, derived from the standard square-law MOSFET model. \n\nHere is how both students can defend their answers:\n\n---\n\n### Why Student A is Correct (The \"Fixed Transistor\" Scenario)\nIf you take a single, physical MOSFET that has already been manufactured, its physical dimensions—width ($W$) and length ($L$)—are fixed. \n\nIn this case, we use this form of the transconductance equation:\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$$\n\n*(where $V_{OV}$ is the overdrive voltage, $V_{GS} - V_{TH}$)*\n\n**The Scenario:** You have a transistor on a breadboard. You turn up the dial on the gate voltage, which increases $V_{OV}$. Because $W/L$ is constant, increasing $V_{OV}$ causes the drain current ($I_D$) to increase, and therefore **$g_m$ goes up**. \n\n*Note: In most introductory electronics courses, this is the answer the professor is looking for.*\n\n---\n\n### Why Student B is Correct (The \"Fixed Current\" Scenario)\nIf you are an Analog Integrated Circuit (IC) designer, you usually have a strict power budget. This means the drain current ($I_D$) is fixed by a current source, and you are free to choose the size ($W/L$) of the transistor before it is manufactured.\n\nIn this case, we use this form of the transconductance equation:\n$$g_m = \\frac{2 I_D}{V_{OV}}$$\n\n**The Scenario:** You are designing a circuit where $I_D$ must remain constant (e.g., at $1\\text{ mA}$). If you decide to increase $V_{OV}$, you must simultaneously shrink the transistor's $W/L$ ratio to keep the current from rising. Because $I_D$ is held constant, $V_{OV}$ is in the denominator, meaning **$g_m$ goes down**. \n\n*(In IC design, this is known as the \"$g_m/I_D$ methodology,\" where a smaller overdrive voltage actually gives you more transconductance efficiency per amp of current).*\n\n---\n\n### Bonus: A 3rd way Student B can be right (Real-world physics)\nEven if you hold $W/L$ constant like Student A, if you increase $V_{OV}$ **too much**, Student B eventually becomes right again. \n\nAt very high gate voltages, the strong vertical electric field pulls the electrons violently against the top of the channel. They begin to scatter and bounce off the oxide interface (an effect called **mobility degradation**). When the electron mobility ($\\mu_n$) drops sharply at very high overdrive voltages, the transconductance ($g_m$) will plateau and actually **start to go down**.\n\n### Summary\n* **Student A is correct** if the **transistor size ($W/L$) is constant** and current is allowed to rise.\n* **Student B is correct** if the **drain current ($I_D$) is constant** and you are resizing the transistor during the design phase.",
        "format": "markdown",
        "sha256": "9d206943e49b419166da75c677d80d988a6fcc7c2330e8b4fbdf73e7858a0c1a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed transistor size, where increasing overdrive raises current and gm, and explains that Student B is right if current is held fixed while the device is resized. The high-field caveat is secondary and does not alter the essential answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 60,
        "output_tokens": 2246,
        "total_tokens": 2306,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1510,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 60,
        "output_tokens": 2246,
        "total_tokens": 2306,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1510,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a classic trick question in electronics, and the answer is that **both students are correct**, depending on what else is being held constant in the circuit. \n\nIn MOSFET physics (assuming the standard square-law model in the saturation region), there are multiple equations for transconductance ($g_m$). Because $I_D$ (drain current), $W/L$ (transistor size), and $V_{OV}$ (overdrive voltage, $V_{GS} - V_{TH}$) are all interrelated, changing $V_{OV}$ requires you to change at least one other variable.\n\nHere is how both students can be right:\n\n---\n\n### Why Student A is correct ($g_m$ goes UP)\n**The Condition:** The physical size of the transistor ($W/L$) is held constant, and the drain current ($I_D$) is allowed to change.\n\nIf you use the equation:\n$$g_m = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) V_{OV}$$\n\n* **The Scenario:** Imagine you have a physical MOSFET on a breadboard. Its size ($W/L$) is fixed. You connect it to a power supply and turn the knob to increase the gate-to-source voltage, which increases $V_{OV}$. \n* **The Result:** As $V_{OV}$ goes up, the drain current ($I_D$) shoots up quadratically, and consequently, **$g_m$ increases linearly**. \n\n---\n\n### Why Student B is correct ($g_m$ goes DOWN)\n**The Condition:** The drain current ($I_D$) is held constant, and you are changing the size of the transistor ($W/L$) to adjust $V_{OV}$.\n\nIf you use the equation:\n$$g_m = \\frac{2I_D}{V_{OV}}$$\n\n* **The Scenario:** Imagine you are an analog IC designer designing an amplifier. You have a strict power budget, so your bias current ($I_D$) is fixed by a current source. You decide you want a higher $V_{OV}$ (perhaps to improve linearity or headroom), so you shrink the $W/L$ ratio of the transistor to force $V_{OV}$ to go up while keeping $I_D$ the same.\n* **The Result:** Because $I_D$ is fixed, increasing $V_{OV}$ causes **$g_m$ to decrease**. This is often referred to as reducing the \"transconductance efficiency\" ($g_m/I_D$) of the MOSFET.\n\n*(Note: Student B can also be correct in a fixed-size transistor at **extremely high** overdrive voltages. Due to real-world non-idealities like mobility degradation—where the high vertical electric field pulls electrons against the oxide interface and slows them down—$g_m$ will eventually peak and begin to drop as $V_{OV}$ gets very large).*\n\n### Summary\n* **Student A** is thinking like a **lab technician** testing a single, fixed transistor (Fixed $W/L$, variable $I_D$).\n* **Student B** is thinking like an **IC designer** working with a fixed power budget (Fixed $I_D$, variable $W/L$).",
        "format": "markdown",
        "sha256": "0c92bfae870fe33ec66347163b1fcaa53871b8b1612d76eabd36147c5da796bb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that for a fixed W/L, increasing overdrive increases gm, and that Student B’s result applies when current is fixed and W/L is adjusted. The extra nonideality caveat does not change the essential answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 60,
        "output_tokens": 2006,
        "total_tokens": 2066,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1310,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 60,
        "output_tokens": 2006,
        "total_tokens": 2066,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1310,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is **yes, topologically and mathematically, the small-signal model of a PMOS device is identical to that of an NMOS device.** \n\nYou can literally take the small-signal circuit diagram of an NMOS, drop it into a PMOS circuit, and get the exact right answers—provided you calculate the DC parameters ($g_m$, $r_o$, etc.) using the PMOS equations.\n\nHowever, in practice, textbooks and engineers often draw the PMOS model slightly differently to match the physical layout of schematics. Here is a detailed breakdown of why they are the same, how they are drawn, and where the actual differences lie.\n\n---\n\n### 1. Why They Are Identical (The Double-Negative Trick)\nAt first glance, it seems like the current source in a PMOS small-signal model should point in the opposite direction of an NMOS, because DC current flows differently in both devices. However, a \"double negative\" makes the AC models identical:\n\n* **In an NMOS:** DC current flows from Drain to Source. If you *increase* the gate voltage ($+v_{gs}$), the transistor turns on harder, and *more* current flows into the Drain. \n* **In a PMOS:** DC current flows from Source to Drain. If you *increase* the gate voltage ($+v_{gs}$), you are bringing the gate closer to the source voltage, which turns the PMOS *off* slightly. Therefore, *less* current flows out of the Drain.\n\nIn AC circuit analysis, **decreasing a current flowing out of a node is mathematically identical to increasing a current flowing into that node.** \n\nBecause both the voltage polarity and the current direction flip for a PMOS, the two negatives cancel out. \n\n### 2. The Two Ways to Draw the PMOS Model\nBecause of the cancellation mentioned above, you have two valid options for drawing the PMOS small-signal model (ignoring the body effect for simplicity):\n\n#### Option A: The \"Identical to NMOS\" Model (using $v_{gs}$)\n* **Control Voltage:** $v_{gs}$ (Gate is $+$, Source is $-$)\n* **Current Source:** $g_m v_{gs}$, pointing from **Drain to Source**.\n* **Output Resistance ($r_o$):** Connected between Drain and Source.\n\n#### Option B: The \"Intuitive PMOS\" Model (using $v_{sg}$)\nIn circuit schematics, PMOS transistors are usually drawn \"upside down\" with the Source at the top (connected to $V_{DD}$) and the Drain at the bottom. To make the math easier to visualize, many engineers flip the model:\n* **Control Voltage:** $v_{sg}$ (Source is $+$, Gate is $-$)\n* **Current Source:** $g_m v_{sg}$, pointing from **Source to Drain**.\n* **Output Resistance ($r_o$):** Connected between Source and Drain.\n\n*Note: Since $v_{sg} = -v_{gs}$, a current of $g_m v_{sg}$ flowing from S to D is the exact same thing as a current of $g_m v_{gs}$ flowing from D to S. Both models are 100% equivalent.*\n\n### 3. What About the Body Effect and Capacitances?\n* **Body Effect ($g_{mb}$):** This also remains identical. In an NMOS, the current source is $g_{mb}v_{bs}$ pointing from D to S. In a PMOS, you can use $g_{mb}v_{bs}$ pointing from D to S, OR you can use $g_{mb}v_{sb}$ pointing from S to D. \n* **Capacitances:** The high-frequency small-signal model is also topologically identical. Both have $C_{gs}$, $C_{gd}$, $C_{gb}$, $C_{sb}$, and $C_{db}$ in the exact same places. \n\n### 4. How They Differ (Parameter Values)\nWhile the **circuit diagram** of the small-signal model is the same, the **component values** will be different for a PMOS and NMOS of the same physical size:\n\n1. **Lower Transconductance ($g_m$):** PMOS devices use holes as charge carriers, while NMOS devices use electrons. Because holes have lower mobility than electrons ($\\mu_p \\approx \\frac{1}{3}\\mu_n$ to $\\frac{1}{2}\\mu_n$), a PMOS of the same size and bias current will have a significantly lower $g_m$.\n2. **Higher Capacitances (in practice):** To compensate for the lower mobility and achieve the same $g_m$ (or drive strength) as an NMOS, designers usually make PMOS transistors 2 to 3 times wider. This larger physical area results in larger parasitic capacitances ($C_{gs}$, $C_{gd}$, etc.), making the PMOS slower.\n3. **Different Output Resistance ($r_o$):** The channel-length modulation parameter ($\\lambda$) is governed by different physics in p-channels versus n-channels, resulting in a different $r_o$ for the same bias current.",
        "format": "markdown",
        "sha256": "e5a39e0d87f135366d524521dd432305ff9f7d2c428dfa58dc13fb5b05ee38cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly says the PMOS small-signal model is the same in form as the NMOS model, meeting the explicit full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 50,
        "output_tokens": 2458,
        "total_tokens": 2508,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 50,
        "output_tokens": 2458,
        "total_tokens": 2508,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is **yes, the small-signal model of a PMOS device is topologically identical to that of an NMOS device.** \n\nWhen performing AC small-signal analysis, you can replace both NMOS and PMOS transistors with the exact same small-signal circuit diagram (whether you are using the hybrid-$\\pi$ model or the T-model), with the dependent current source pointing from Drain to Source in both cases.\n\nHowever, this often confuses students because the DC voltages and currents in a PMOS are opposite to those in an NMOS. Here is the explanation of why the small-signal models end up being the same, along with a few practical differences in their component *values*.\n\n---\n\n### 1. Why the \"Negative\" Signs Cancel Out\nSmall-signal analysis is only concerned with **changes** ($\\Delta$) in voltage and current around a DC bias point, not the absolute DC values themselves. \n\nLet's compare what happens to the drain current ($i_d$) when we apply a tiny **positive** change to the gate-to-source voltage ($+v_{gs}$):\n\n* **In an NMOS:** A positive $v_{gs}$ turns the transistor on *more*. This causes an **increase** in current flowing **into** the drain. Therefore, a positive $v_{gs}$ yields a small-signal current $i_d$ flowing from Drain to Source.\n* **In a PMOS:** The DC current flows *out* of the drain. A positive $v_{gs}$ turns the PMOS on *less* (closer to cutoff). This causes a **decrease** in the DC current flowing **out** of the drain. \n\n**The Crucial Insight:** Mathematically, *decreasing* a current flowing *out* of a node is identical to *increasing* a current flowing *into* that node. \n\nTherefore, for both NMOS and PMOS, a positive change in $v_{gs}$ results in a small-signal current $i_d = g_m v_{gs}$ flowing **into the drain and out of the source**. \n\n### 2. The \"Flipped\" PMOS Model (Alternative Convention)\nWhile you *can* use the exact same model, some textbooks and professors prefer to write PMOS equations in terms of Source-to-Gate voltage ($v_{sg}$) rather than Gate-to-Source voltage ($v_{gs}$) to match the DC equations.\n\nSince $v_{sg} = -v_{gs}$, if you use $v_{sg}$ as your control voltage, you must flip the direction of the dependent current source so it points from **Source to Drain**. \n\n* **Standard Model (NMOS & PMOS):** Current flows Drain $\\rightarrow$ Source, controlled by $g_m v_{gs}$.\n* **Flipped Model (PMOS only):** Current flows Source $\\rightarrow$ Drain, controlled by $g_m v_{sg}$.\n\nBoth models are 100% mathematically equivalent and will yield the exact same circuit analysis results. Most engineers prefer to just use the NMOS model for everything to avoid making sign errors.\n\n### 3. The Bulk (Body) Terminal\nIn DC analysis, the NMOS bulk is usually tied to Ground (lowest potential), and the PMOS bulk is tied to $V_{DD}$ (highest potential). \n\nHowever, in small-signal analysis, all DC voltage sources ($V_{DD}$ and Ground) are treated as **AC ground**. Therefore, the body effect transconductance ($g_{mb}v_{bs}$) behaves identically in both models as well.\n\n### 4. Where they DO differ: Parameter Values\nWhile the *circuit diagram* for the small-signal model is identical, the numerical values of the components inside the model will be different for an NMOS and PMOS of the same physical size:\n\n* **Transconductance ($g_m$):** PMOS relies on holes, which have lower mobility than the electrons used in NMOS ($\\mu_p < \\mu_n$). For the same dimensions and bias current, a PMOS will have a lower $g_m$ than an NMOS.\n* **Capacitances ($C_{gs}, C_{gd}$, etc.):** To compensate for the lower hole mobility, circuit designers usually make the PMOS transistor 2 to 3 times wider than the NMOS. Because the PMOS is physically larger, its internal parasitic capacitances will be larger, making it slower at high frequencies.\n* **Output Resistance ($r_o$):** The channel-length modulation parameter ($\\lambda$) is physically different for PMOS and NMOS, resulting in different values for $r_o$.",
        "format": "markdown",
        "sha256": "b07d749118aa5f8d034ec40456a2015f92bccae95fca9e0a2fdb6d397c6c60af"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model is the same in form as the NMOS model. Its discussion of polarity conventions is consistent with that conclusion; the extra parameter comparisons are not required.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 50,
        "output_tokens": 2389,
        "total_tokens": 2439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1414,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 50,
        "output_tokens": 2389,
        "total_tokens": 2439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1414,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is **yes**. Topologically and mathematically, the small-signal model of a PMOS device is **identical** to that of an NMOS device. \n\nYou can literally take the small-signal circuit diagram of an NMOS (with $v_{gs}$, $g_m v_{gs}$, and $r_o$) and drop it directly into a PMOS circuit for AC analysis, and you will get the exact right answer.\n\nHowever, understanding *why* they are identical—and why you sometimes see them drawn differently in textbooks—requires looking at the physics and sign conventions.\n\n---\n\n### 1. Why are they identical? (The \"Double Negative\" Effect)\nIn small-signal analysis, we only care about **changes** ($\\Delta$) around a DC operating point, not the absolute DC values. Let's compare what happens when we apply a small **positive** change to the gate-to-source voltage ($\\Delta v_{gs} > 0$) for both devices:\n\n*   **In an NMOS:** A positive $\\Delta v_{gs}$ turns the transistor on *more*. Therefore, **more** current flows **into** the drain. This is a positive change in drain current ($\\Delta i_d > 0$).\n*   **In a PMOS:** A positive $\\Delta v_{gs}$ (making the gate more positive relative to the source) turns the PMOS on *less*. Therefore, **less** current flows **out** of the drain. \n\nHere is the crucial part: **Less current flowing *out* of the drain is mathematically identical to more current flowing *into* the drain.** \n\nBecause the PMOS has both opposite charge carriers (holes) and opposite current direction (Source-to-Drain), the two negatives cancel out when taking the derivative to find the small-signal parameters. \n\nTherefore, for **both** NMOS and PMOS:\n*   $i_d = g_m v_{gs}$ (where $i_d$ is defined as entering the drain, and $g_m$ is always a positive number).\n*   The output resistance $r_o$ connects from Drain to Source.\n*   The body-effect current source $g_{mb}v_{bs}$ points from Drain to Source.\n*   All parasitic capacitances ($C_{gs}, C_{gd}, C_{db}, C_{sb}$) are connected between the exact same terminals.\n\n---\n\n### 2. Why do some textbooks draw them differently?\nIn circuit schematics, NMOS transistors are usually drawn with the Drain on top and Source on the bottom. PMOS transistors are usually drawn \"upside down\" with the Source on top (connected to $V_{DD}$) and the Drain on the bottom.\n\nBecause of this, many engineers and textbooks prefer an **alternative (but mathematically equivalent)** PMOS small-signal model to make hand-calculations easier to visualize:\n\n1.  **The Standard (Identical) Model:**\n    *   Voltage is measured as $v_{gs}$ ($v_g - v_s$).\n    *   The dependent current source is **$g_m v_{gs}$**, pointing from **Drain to Source**.\n\n2.  **The \"Flipped\" PMOS Model:**\n    *   Voltage is measured as $v_{sg}$ ($v_s - v_g$).\n    *   The dependent current source is **$g_m v_{sg}$**, pointing from **Source to Drain**.\n\nSince $v_{sg} = -v_{gs}$, reversing the direction of the current source arrow and flipping the voltage subscripts cancels out the negative sign. **Both models are 100% correct and yield the exact same results.** \n\n---\n\n### 3. What *is* different between them?\nWhile the small-signal *circuit diagram* is the same, the **equations used to calculate the values** of the small-signal parameters from the DC bias point are slightly different (to account for negative voltages in the PMOS):\n\n| Parameter | NMOS Equation | PMOS Equation |\n| :--- | :--- | :--- |\n| **Transconductance ($g_m$)** | $\\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{THn})$ | $\\mu_p C_{ox} \\frac{W}{L} (V_{SG} - \\|V_{THp}\\|)$ |\n| **Alternative $g_m$** | $\\frac{2I_D}{V_{GS} - V_{THn}}$ | $\\frac{2I_{SD}}{V_{SG} - \\|V_{THp}\\|}$ |\n| **Output Resistance ($r_o$)** | $\\frac{1}{\\lambda_n I_D}$ | $\\frac{1}{\\lambda_p I_{SD}}$ |\n\nFurthermore, because holes have lower mobility than electrons ($\\mu_p < \\mu_n$), a PMOS of the same physical size and DC current as an NMOS will generally have a **lower $g_m$**.",
        "format": "markdown",
        "sha256": "4c3d939e51c6e8ae43697ccb631ddff26d4098926dd86dcc81d55fe0217ea9c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer explicitly says the PMOS small-signal model is the same as the NMOS model, which earns full credit under the golden solution's rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 50,
        "output_tokens": 2693,
        "total_tokens": 2743,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1622,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 50,
        "output_tokens": 2693,
        "total_tokens": 2743,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1622,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch $I_X$ versus $V_X$, let's analyze the terminal voltages and operating regions of the NMOS transistor $M_1$.\n\n---\n\n### **1. Circuit Analysis**\nFrom the given schematic (known as a **diode-connected MOSFET**):\n* **Source voltage:** $V_S = 0\\text{ V}$ (grounded)\n* **Gate voltage:** $V_G = V_X$\n* **Drain voltage:** $V_D = V_X$\n\nThis gives the gate-to-source and drain-to-source voltages as:\n$$V_{GS} = V_{DS} = V_X$$\n\nSince no current flows into the gate terminal ($I_G = 0$), the current $I_X$ is entirely equal to the drain current $I_D$ of the transistor:\n$$I_X = I_D$$\n\n---\n\n### **2. Regions of Operation**\n\n#### **Case 1: $V_X < V_{TH}$ (Cutoff Region)**\n* When $V_X$ is less than the threshold voltage $V_{TH}$, we have $V_{GS} < V_{TH}$.\n* The transistor $M_1$ is **OFF** (in cutoff).\n* Therefore, no current flows:\n  $$I_X = 0$$\n\n*(Note: Even if $V_X$ goes negative, the drain and source roles swap such that the effective $V_{GS} = 0\\text{ V} < V_{TH}$, keeping the channel off).*\n\n---\n\n#### **Case 2: $V_X \\ge V_{TH}$ (Saturation Region)**\n* As soon as $V_X$ exceeds $V_{TH}$, the transistor turns **ON**.\n* To find the region of operation, we compare $V_{DS}$ with the overdrive voltage $(V_{GS} - V_{TH})$:\n  $$V_{DS} = V_X$$\n  $$V_{GS} - V_{TH} = V_X - V_{TH}$$\n* Since $V_{TH} > 0$, it is always true that $V_X > V_X - V_{TH}$ (i.e., $V_{DS} > V_{GS} - V_{TH}$). \n* Thus, a diode-connected MOSFET is **always in saturation** whenever it is on.\n* Neglecting channel-length modulation, the current follows the square-law equation:\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2$$\n\n---\n\n### **3. Sketch of $I_X$ versus $V_X$**\n\n```text\n      I_X\n       ^\n       |                              /\n       |                             /\n       |                            /   <-- Parabolic curve:\n       |                           /        I_X = (1/2) * u_n * C_ox * (W/L) * (V_X - V_TH)^2\n       |                         .'\n       |                       .'\n       |                    .-'\n       |                _.-'\n  0 ===+=============.-----------------> V_X\n       0            V_TH\n       |<----------->|<--------------->\n          M_1 OFF         M_1 ON\n          (Cutoff)      (Saturation)\n```\n\n### **Key Features to Include in Your Sketch:**\n1. **Horizontal Axis ($V_X$):** Mark the threshold voltage **$V_{TH}$** on the positive $V_X$-axis.\n2. **Flat Region ($0 \\le V_X \\le V_{TH}$):** Draw a flat line along the horizontal axis where $I_X = 0$.\n3. **Parabolic Region ($V_X > V_{TH}$):** Starting at $V_X = V_{TH}$, draw an upward-curving **parabola** (concave up). Because the derivative $\\frac{\\partial I_X}{\\partial V_X} = \\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})$ is zero at $V_X = V_{TH}$, the curve transitions smoothly (horizontally) from the axis at $V_{TH}$ and gets steeper as $V_X$ increases.",
        "format": "markdown",
        "sha256": "ac7f13dec9c10217d81fbe6de4a10169697bd167ecdecbedf25b881f398dae20"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current up to threshold, and a quadratic rise above threshold in saturation. The omitted negative-voltage junction-current detail is secondary and not required.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 2403,
        "total_tokens": 3551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1458,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 2403,
        "total_tokens": 3551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1458,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch $I_X$ versus $V_X$, let's analyze the behavior of the NMOS transistor $M_1$ as the voltage $V_X$ varies from $0$ to positive values.\n\n---\n\n### **1. Circuit Analysis**\nFrom the given circuit diagram:\n* The **source** is grounded: $V_S = 0\\text{ V}$\n* The **gate** and **drain** are tied together (this is known as a **diode-connected** transistor) and connected to $V_X$:\n  $$V_{GS} = V_{DS} = V_X$$\n* Since no current flows into the gate of an ideal MOSFET ($I_G = 0$), the current $I_X$ is simply the drain current of $M_1$:\n  $$I_X = I_D$$\n\n---\n\n### **2. Regions of Operation**\n\n#### **Case 1: $V_X < V_{TH}$ (Cutoff Region)**\n* When $V_X$ is less than the threshold voltage $V_{TH}$, the gate-to-source voltage is insufficient to form a conducting channel ($V_{GS} < V_{TH}$).\n* Therefore, $M_1$ is **OFF** (in cutoff), and no current flows:\n  $$I_X = 0$$\n\n#### **Case 2: $V_X \\ge V_{TH}$ (Saturation Region)**\n* Once $V_X$ exceeds $V_{TH}$, the transistor turns **ON**.\n* To determine whether $M_1$ is in the triode or saturation region, we compare $V_{DS}$ with the overdrive voltage $(V_{GS} - V_{TH})$:\n  $$V_{DS} = V_X$$\n  $$V_{GS} - V_{TH} = V_X - V_{TH}$$\n* Since $V_{TH} > 0$, we always have $V_X > V_X - V_{TH}$, which means:\n  $$V_{DS} > V_{GS} - V_{TH}$$\n* Thus, a diode-connected enhancement MOSFET is **always in saturation** when it is turned on.\n* Neglecting channel-length modulation, the current $I_X$ follows the square-law equation:\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2$$\n\n---\n\n### **3. Sketch of $I_X$ versus $V_X$**\n\nThe plot stays at zero until $V_X = V_{TH}$, and then rises **parabolically** (quadratically) for $V_X > V_{TH}$:\n\n```text\n      I_X\n       ^\n       |                                    /\n       |                                   /\n       |                                  /\n       |                                 /   <-- Parabolic curve:\n       |                                /        I_X = 0.5 * u_n * C_ox * (W/L) * (V_X - V_TH)^2\n       |                              .'\n       |                            .'\n       |                         .-'\n       |                     _.-'\n     0 +====================*----------------------> V_X\n       0                   V_TH\n         (Cutoff: I_X = 0)    (Saturation)\n```\n\n### **Key Features to Include in Your Sketch:**\n1. **Horizontal Line ($0 \\le V_X \\le V_{TH}$):** $I_X = 0$.\n2. **Transition Point ($V_X = V_{TH}$):** The curve begins to rise smoothly with a slope of zero at $V_X = V_{TH}$.\n3. **Upward Concave Curve ($V_X > V_{TH}$):** $I_X$ increases quadratically with $(V_X - V_{TH})$, resembling the $I\\text{-}V$ characteristic of a semiconductor diode (hence the name *diode-connected* transistor).",
        "format": "markdown",
        "sha256": "c72778e6ce9e2150aca97468045f21ad62225ca4c6251f4d93c7ab49e25b6098"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold and a quadratic rise above threshold, with the device in saturation.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 1817,
        "total_tokens": 2965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 1817,
        "total_tokens": 2965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch $I_X$ versus $V_X$, let's analyze the operating regions of the NMOS transistor $M_1$ as $V_X$ varies from $0\\text{ V}$ upward.\n\n---\n\n### **1. Circuit Analysis**\nFrom the given schematic, the transistor $M_1$ is in a **diode-connected** configuration (its gate and drain are tied together):\n* **Source voltage:** $V_S = 0\\text{ V}$\n* **Gate-to-source voltage:** $V_{GS} = V_X$\n* **Drain-to-source voltage:** $V_{DS} = V_X$\n* **Current:** Since no DC current flows into the gate ($I_G = 0$), the entire current $I_X$ flows into the drain:\n  $$I_X = I_D$$\n\n---\n\n### **2. Operating Regions**\n\n#### **Region 1: $0 \\le V_X < V_{TH}$ (Cutoff Region)**\n* When $V_X$ is less than the threshold voltage $V_{TH}$, we have $V_{GS} < V_{TH}$.\n* The transistor $M_1$ is **OFF** (in cutoff).\n* Therefore, no drain current flows:\n  $$I_X = 0$$\n\n#### **Region 2: $V_X \\ge V_{TH}$ (Saturation Region)**\n* Once $V_X$ exceeds $V_{TH}$, the transistor turns **ON**.\n* For an NMOS transistor to be in saturation, the drain-to-source voltage must satisfy:\n  $$V_{DS} \\ge V_{GS} - V_{TH}$$\n* Since $V_{DS} = V_{GS} = V_X$, this condition becomes:\n  $$V_X \\ge V_X - V_{TH} \\implies 0 \\ge -V_{TH}$$\n* Because $V_{TH} > 0$ for an enhancement-mode NMOS device, this condition is **always satisfied**. Thus, a diode-connected MOSFET is always in **saturation** whenever it is ON.\n* Neglecting channel-length modulation ($\\lambda = 0$), the current follows the square-law equation:\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox} \\frac{W}{L}(V_X - V_{TH})^2$$\n\n---\n\n### **3. Sketch of $I_X$ versus $V_X$**\n\n* **From $V_X = 0$ to $V_{TH}$:** The curve is a flat line along the horizontal axis ($I_X = 0$).\n* **For $V_X > V_{TH}$:** The curve rises **parabolically** (quadratically) starting at $V_X = V_{TH}$. \n\n```text\n      I_X\n       ^\n       |                                     /\n       |                                    /\n       |                                   /\n       |                                  /  <-- Parabolic curve:\n       |                                .        I_X = 0.5 * u_n * C_ox * (W/L) * (V_X - V_TH)^2\n       |                              .\n       |                            .\n       |                         .\n       |                     .\n       |                 . \n       +===============*-------------------------> V_X\n       0              V_TH\n```\n\n### **Key Features to Label on Your Sketch:**\n1. **Horizontal Axis Intercept:** Mark $V_{TH}$ on the $V_X$ axis where the current begins to rise.\n2. **Shape:** Flat ($0\\text{ A}$) for $V_X < V_{TH}$, and concave-up (quadratic) for $V_X \\ge V_{TH}$.\n3. **Slope:** At any point in the $V_X > V_{TH}$ region, the slope of the curve is the transconductance of the transistor:\n   $$\\frac{\\partial I_X}{\\partial V_X} = \\mu_n C_{ox} \\frac{W}{L}(V_X - V_{TH}) = g_m$$",
        "format": "markdown",
        "sha256": "2d12c86b836f747ebe8f6813c6daf78126c3fcf690e17a3c068ef71c324b0938"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, approximately zero current below threshold, and a quadratic current rise above threshold because it operates in saturation.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 1791,
        "total_tokens": 2939,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 1791,
        "total_tokens": 2939,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch $I_X$ versus $V_X$, we first identify the terminal voltages and current of the NMOS transistor $M_1$:\n\n* **Source Voltage ($V_S$):** $0\\text{ V}$ (grounded)\n* **Gate-to-Source Voltage ($V_{GS}$):** $V_{GS} = V_X$\n* **Drain-to-Source Voltage ($V_{DS}$):** $V_{DS} = 1\\text{ V}$ (fixed)\n* **Drain Current ($I_D$):** $I_D = I_X$\n\nLet $V_{TH}$ be the threshold voltage of $M_1$. As $V_X$ increases from $0\\text{ V}$, the transistor passes through three distinct operating regions:\n\n---\n\n### 1. Cutoff Region ($V_X < V_{TH}$)\nWhen the gate voltage is below the threshold voltage ($V_{GS} < V_{TH}$), the transistor is **OFF**:\n$$I_X = 0$$\n\n---\n\n### 2. Saturation Region ($V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$)\nAs $V_X$ exceeds $V_{TH}$, the transistor turns **ON**. For the NMOS to be in saturation, it must satisfy:\n$$V_{DS} \\ge V_{GS} - V_{TH}$$\n\nSubstituting $V_{DS} = 1\\text{ V}$ and $V_{GS} = V_X$:\n$$1\\text{ V} \\ge V_X - V_{TH} \\implies V_X \\le V_{TH} + 1\\text{ V}$$\n\nIn this range, the drain current follows a **parabolic (square-law)** relationship with $V_X$:\n$$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2$$\n\nAt the boundary $V_X = V_{TH} + 1\\text{ V}$, the current reaches:\n$$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(1\\text{ V})^2$$\n\n---\n\n### 3. Triode (Linear) Region ($V_X > V_{TH} + 1\\text{ V}$)\nWhen $V_X$ increases beyond $V_{TH} + 1\\text{ V}$, the overdrive voltage $(V_{GS} - V_{TH})$ exceeds $V_{DS}$, pushing $M_1$ into the **triode region**. The current equation becomes:\n$$I_X = \\mu_n C_{ox}\\frac{W}{L}\\left[(V_{GS} - V_{TH})V_{DS} - \\frac{1}{2}V_{DS}^2\\right]$$\n\nSubstituting $V_{GS} = V_X$ and $V_{DS} = 1\\text{ V}$:\n$$I_X = \\mu_n C_{ox}\\frac{W}{L}(1\\text{ V})\\left(V_X - V_{TH} - 0.5\\text{ V}\\right)$$\n\nBecause $V_{DS}$ is held constant at $1\\text{ V}$, **$I_X$ increases linearly with $V_X$** (a straight line) with a constant slope of:\n$$\\text{Slope} = \\frac{\\partial I_X}{\\partial V_X} = \\mu_n C_{ox}\\frac{W}{L}(1\\text{ V})$$\n\n*(Note: The slope transitions smoothly at $V_X = V_{TH} + 1\\text{ V}$ without any sharp corner).*\n\n---\n\n### Sketch of $I_X$ versus $V_X$\n\n```text\n      I_X\n       ^\n       |                                          /  <-- Straight Line (Triode)\n       |                                        /        Slope = u_n * C_ox * (W/L) * (1 V)\n       |                                      /\n       |                                    /\n       |                                  /\nI_sat -| - - - - - - - - - - - - - - - -• \n       |                              . :\n       |                            .   :  <-- Parabolic Curve (Saturation)\n       |                         .      :      I_X ∝ (V_X - V_TH)^2\n       |                     .          :\n       |               .                :\n     0 +============•-------------------•-----------------> V_X\n       0           V_TH            V_TH + 1 V\n\n       |<--Cutoff-->|<---Saturation---->|<----Triode---->|\n```\n\n### Summary of Key Plot Features to Include:\n1. **Flat at zero** from $V_X = 0$ to $V_{TH}$.\n2. **Upward-curving parabola** from $V_{TH}$ to $V_{TH} + 1\\text{ V}$.\n3. **Straight line** with constant positive slope for $V_X > V_{TH} + 1\\text{ V}$ (assuming ideal square-law behavior; in practice, high vertical electric fields cause mobility degradation, which slightly flattens the curve at very high $V_X$).",
        "format": "markdown",
        "sha256": "35d3d184b83e00d638dc4ccbace3e5711d3e790ae130d7472909f3330f912ad1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, the quadratic saturation region up to VTH + 1 V, and the roughly linear triode-region rise beyond it.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 2614,
        "total_tokens": 3739,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1450,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 2614,
        "total_tokens": 3739,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1450,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the current $I_X$ versus the voltage $V_X$, let's first identify the terminal voltages of the NMOS transistor $M_1$:\n\n* **Source Voltage ($V_S$):** $0\\text{ V}$ (connected to ground)\n* **Gate Voltage ($V_G$):** $V_X$\n* **Drain Voltage ($V_D$):** $1\\text{ V}$ (fixed by the DC voltage source)\n\nFrom these, we find the gate-to-source and drain-to-source voltages:\n* $V_{GS} = V_G - V_S = V_X$\n* $V_{DS} = V_D - V_S = 1\\text{ V}$\n* $I_X = I_D$ (the drain current)\n\n---\n\n### **Step-by-Step Region Analysis**\n\nAs $V_X$ increases from $0\\text{ V}$, the transistor goes through three regions of operation:\n\n#### **1. Cutoff Region ($V_X < V_{TH}$)**\n* When the gate-to-source voltage is less than the threshold voltage ($V_{GS} < V_{TH}$), the transistor is **OFF**.\n* **Equation:** \n  $$I_X = 0$$\n* **Curve Shape:** A flat horizontal line along the x-axis ($I_X = 0$).\n\n---\n\n#### **2. Saturation Region ($V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$)**\n* Once $V_X$ exceeds $V_{TH}$, the transistor turns **ON**. \n* For the transistor to be in saturation, we must have $V_{DS} \\ge V_{GS} - V_{TH}$. Substituting our circuit values:\n  $$1\\text{ V} \\ge V_X - V_{TH} \\implies V_X \\le V_{TH} + 1\\text{ V}$$\n* **Equation:**\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2$$\n* **Curve Shape:** $I_X$ increases **quadratically (parabolically)** with $V_X$.\n\n---\n\n#### **3. Triode (Linear) Region ($V_X > V_{TH} + 1\\text{ V}$)**\n* When $V_X$ exceeds $V_{TH} + 1\\text{ V}$, the overdrive voltage $(V_{GS} - V_{TH})$ becomes greater than $V_{DS} = 1\\text{ V}$, pushing $M_1$ into the triode region.\n* **Equation:**\n  $$I_X = \\mu_n C_{ox}\\frac{W}{L}\\left[(V_{GS} - V_{TH})V_{DS} - \\frac{1}{2}V_{DS}^2\\right]$$\n  Substituting $V_{GS} = V_X$ and $V_{DS} = 1\\text{ V}$:\n  $$I_X = \\mu_n C_{ox}\\frac{W}{L}\\left(V_X - V_{TH} - 0.5\\right)$$\n* **Curve Shape:** Since $V_{DS}$ is fixed at $1\\text{ V}$, $I_X$ becomes a **straight line (linear function)** with respect to $V_X$, having a constant slope of $\\mu_n C_{ox}\\frac{W}{L}(1\\text{ V})$.\n\n---\n\n### **Sketch of $I_X$ versus $V_X$**\n\n```text\n      I_X\n       ^\n       |                                        /\n       |                                      /  <-- Linear (Straight Line)\n       |                                    /        Slope = k_n * (1 V)\n       |                                  /\n       |                                /\n0.5*k_n| - - - - - - - - - - - - - - -• \n       |                            . |\n       |                         .    |\n       |                     .        |  <-- Parabolic (Quadratic)\n       |                .             |\n       |         .                    |\n     0 +========•---------------------•------------------> V_X\n       0       V_TH              V_TH + 1 V\n\n       |<------>|<------------------->|<----------------\n        Cutoff        Saturation            Triode\n```\n*(Note: Above, $k_n = \\mu_n C_{ox}\\frac{W}{L}$)*\n\n### **Summary of Key Features to Include in Your Sketch:**\n1. **Zero current** from $V_X = 0$ to $V_X = V_{TH}$.\n2. **Upward-curving parabola** starting at $V_X = V_{TH}$ and ending at $V_X = V_{TH} + 1\\text{ V}$.\n3. **Straight line** continuing smoothly (with no sharp corner/kink in the slope) for $V_X > V_{TH} + 1\\text{ V}$.",
        "format": "markdown",
        "sha256": "8c526480ee3d6195038ab9f53dd998706befdb1c98ee4e97879003590872d7ad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, the quadratic saturation-region rise through VTH + 1 V, and the roughly linear triode-region rise beyond that point.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 2493,
        "total_tokens": 3618,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1361,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 2493,
        "total_tokens": 3618,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1361,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch $I_X$ versus $V_X$, we first identify the terminal voltages of the NMOS transistor $M_1$:\n\n* **Source Voltage ($V_S$):** $0\\text{ V}$ (grounded)\n* **Gate-to-Source Voltage ($V_{GS}$):** $V_{GS} = V_G - V_S = V_X$\n* **Drain-to-Source Voltage ($V_{DS}$):** $V_{DS} = V_D - V_S = 1\\text{ V}$ (held constant)\n* **Drain Current ($I_D$):** $I_X = I_D$\n\nAssuming the threshold voltage of $M_1$ is $V_{TH}$ (where $0 < V_{TH} < 1\\text{ V}$) and neglecting channel-length modulation ($\\lambda = 0$), we can analyze the behavior of the circuit across three distinct regions as $V_X$ increases from $0$:\n\n---\n\n### 1. Cutoff Region ($V_X < V_{TH}$)\n* Since $V_{GS} = V_X < V_{TH}$, the transistor is **OFF**.\n* **Equation:**\n  $$I_X = 0$$\n* **Graph behavior:** A flat horizontal line along the $V_X$-axis at $I_X = 0$.\n\n---\n\n### 2. Saturation Region ($V_{TH} \\le V_X \\le V_{TH} + 1\\text{ V}$)\n* As soon as $V_X$ exceeds $V_{TH}$, the transistor turns ON. \n* A MOSFET operates in saturation when $V_{DS} \\ge V_{GS} - V_{TH}$. Substituting our known values gives:\n  $$1\\text{ V} \\ge V_X - V_{TH} \\implies V_X \\le V_{TH} + 1\\text{ V}$$\n* **Equation:**\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2$$\n* **Graph behavior:** $I_X$ increases **quadratically (parabolically)** with $V_X$. At the boundary $V_X = V_{TH} + 1\\text{ V}$, the current reaches:\n  $$I_{X,\\text{sat}} = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(1\\text{ V})^2$$\n\n---\n\n### 3. Triode Region ($V_X > V_{TH} + 1\\text{ V}$)\n* When $V_X$ increases beyond $V_{TH} + 1\\text{ V}$, the overdrive voltage $V_{GS} - V_{TH}$ exceeds $V_{DS} = 1\\text{ V}$, pushing $M_1$ into the **triode (linear) region**.\n* **Equation:**\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}\\left[2(V_{GS} - V_{TH})V_{DS} - V_{DS}^2\\right]$$\n  Substituting $V_{GS} = V_X$ and $V_{DS} = 1\\text{ V}$:\n  $$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}\\left[2(V_X - V_{TH})(1) - 1^2\\right] = \\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH} - 0.5)$$\n* **Graph behavior:** Because $V_{DS}$ is constant, $I_X$ becomes a **straight line (linear function)** of $V_X$ with a constant slope of:\n  $$\\text{Slope} = \\frac{\\partial I_X}{\\partial V_X} = \\mu_n C_{ox}\\frac{W}{L}(1\\text{ V})$$\n  *(Note: The slope at the end of the saturation parabola smoothly matches the slope of this straight line, so there is no sharp corner at the transition).*\n\n---\n\n### Sketch of $I_X$ versus $V_X$\n\n```text\n      I_X\n       ^\n       |         Cutoff        Saturation         Triode\n       |            :              :             / (Linear: slope = u_n*C_ox*(W/L)*1V)\n       |            :              :            /\n       |            :              :           /\n       |            :              :          /\nI_sat -| - - - - - -:- - - - - - - : - - - - • \n       |            :              :       . '\n       |            :              :     .'  (Parabolic)\n       |            :              :   .'\n       |            :              : .'\n     0 +============•==============:===================> V_X\n       0           V_TH       V_TH + 1 V\n```\n\n### Summary of Key Features to Include in Your Drawing:\n1. **Zero current** from $V_X = 0$ to $V_X = V_{TH}$.\n2. **Upward-curving parabola** from $V_X = V_{TH}$ to $V_X = V_{TH} + 1\\text{ V}$.\n3. **Straight line** continuing upward with a constant positive slope for $V_X > V_{TH} + 1\\text{ V}$ *(Avoid the common mistake of curving the graph downward in the triode region—that only happens when plotting $I_D$ vs. $V_{DS}$, whereas here $V_{DS}$ is fixed and $V_{GS}$ is being swept!).*",
        "format": "markdown",
        "sha256": "2e15bf9c9b2f48986c0ef99cf77a4217efb49666c1c0c641f4315a27e63937c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies zero current below threshold, a quadratic rise in saturation up to V_X = V_TH + 1 V, and a roughly linear rise in triode; the equations and transition are consistent with the circuit.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 3113,
        "total_tokens": 4238,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 3113,
        "total_tokens": 4238,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the device shown in the figure cannot act as a current source. \n\nHere is the step-by-step explanation of why:\n\n### 1. Identify the Device and Terminals\n* **$M_1$ is a PMOS transistor.** \n* **Top terminal (with the arrow):** Source ($S$), let its voltage be $V_X$.\n* **Left terminal:** Gate ($G$), connected to ground ($V_G = 0\\text{ V}$).\n* **Bottom terminal:** Drain ($D$), connected to ground ($V_D = 0\\text{ V}$).\n\n---\n\n### 2. Why It Fails as a Current Source\nBy definition, a current source must maintain a nearly **constant current independently of the voltage applied across it** (which corresponds to a very high output impedance). \n\nIn a MOSFET operating in the saturation region, **only the drain terminal behaves as a current source**, and only if the gate-to-source voltage ($V_{GS}$ or $V_{SG}$) is held strictly constant.\n\nIn the given circuit:\n1. **The external terminal is the Source, not the Drain:** The source-to-gate voltage is directly controlled by the terminal voltage $V_X$:\n   $$V_{SG} = V_S - V_G = V_X - 0 = V_X$$\n2. **Current is strongly dependent on terminal voltage:** Because the gate and drain are both tied to ground ($V_G = V_D = 0$), the PMOS is in a **diode-connected configuration**. As soon as $V_X > |V_{TH}|$, the transistor turns on in saturation, and the current $I_X$ is given by:\n   $$I_X = \\frac{1}{2}\\mu_p C_{ox}\\frac{W}{L}\\left(V_{SG} - |V_{TH}|\\right)^2 = \\frac{1}{2}\\mu_p C_{ox}\\frac{W}{L}\\left(V_X - |V_{TH}|\\right)^2$$\n\nBecause $I_X$ varies quadratically with the terminal voltage $V_X$ rather than staying constant, this configuration behaves as a **two-terminal nonlinear resistor** (with a low small-signal impedance of approximately $1/g_m$) rather than a current source.\n\n---\n\n### How to Properly Configure a PMOS as a Current Source\nTo use a PMOS transistor as a current source:\n1. Tie the **Source** to a fixed supply voltage ($V_{DD}$).\n2. Tie the **Gate** to a fixed bias voltage ($V_b$) so that $V_{SG} = V_{DD} - V_b$ remains constant.\n3. Take the output current from the **Drain** terminal (making sure the drain voltage stays below $V_b + |V_{TH}|$ so the transistor remains in saturation).",
        "format": "markdown",
        "sha256": "cff00eca7cd56f14f2cdc852b2f06cfc0b93c481cde9a48a70d9725d19c1ee23"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS with source at VX and gate and drain grounded, and explains that the diode-connected device has low small-signal impedance (about 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 2209,
        "total_tokens": 3321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 2209,
        "total_tokens": 3321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the device shown in the figure **cannot** act as a constant current source. \n\nHere is the step-by-step reasoning why:\n\n### 1. Terminal Identification\nThe device $M_1$ is a **PMOS transistor**:\n* **Source ($S$):** The top terminal (indicated by the arrow pointing *into* the device), where the current $I_X$ enters. Let's call the voltage at this node $V_X$.\n* **Gate ($G$):** Connected to ground ($V_G = 0\\text{ V}$).\n* **Drain ($D$):** The bottom terminal, which is also connected to ground ($V_D = 0\\text{ V}$).\n\n---\n\n### 2. Requirement for a Current Source\nFor a two-terminal device to act as a current source, the current flowing through it ($I_X$) must be **independent** of the voltage across it ($V_X$). In a MOSFET, this property is achieved only when looking into the **drain** terminal while holding the gate-source voltage ($V_{GS}$ or $V_{SG}$) constant in the saturation region.\n\n---\n\n### 3. Circuit Analysis\nIn the given configuration, the external circuit is connected to the **source** rather than the drain:\n1. The source-to-gate voltage is directly controlled by the terminal voltage $V_X$:\n   $$V_{SG} = V_S - V_G = V_X - 0 = V_X$$\n2. Since the gate and drain are both tied to ground ($V_G = V_D = 0\\text{ V}$), the PMOS is effectively **diode-connected** ($V_{SD} = V_{SG} = V_X$).\n3. Once $V_X > |V_{TH}|$, the transistor turns on in the saturation region, and the current $I_X$ is given by:\n   $$I_X = \\frac{1}{2}\\mu_p C_{ox}\\frac{W}{L}(V_X - |V_{TH}|)^2$$\n\n---\n\n### Conclusion\n* **Strong Voltage Dependence:** Because $I_X$ changes quadratically with the terminal voltage $V_X$, it behaves like a nonlinear resistor (or diode) rather than a constant current source.\n* **Low Output Impedance:** From a small-signal perspective, a good current source requires a very high output impedance (such as $r_o$ when looking into the drain). Looking into the source terminal here yields a very low impedance of approximately $\\frac{1}{g_m}$.\n\n*(Note: To properly build a current sink to ground, you should instead use an **NMOS** transistor with its source grounded, its gate tied to a fixed bias voltage $V_b$, and the current $I_X$ flowing into its **drain**).*",
        "format": "markdown",
        "sha256": "31a12a57c3cbcd294299bed757f037250b50a1c659eac8da46f4fabd6f171fbb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS with its gate and drain grounded, recognizes the diode-connected configuration, and explains that its current depends on VX and its small-signal resistance is about 1/gm, so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 2350,
        "total_tokens": 3462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1725,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 2350,
        "total_tokens": 3462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1725,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the device shown in the figure cannot act as a constant current source. \n\nHere is a step-by-step explanation of why:\n\n### 1. Identify the Terminals\n* **$M_1$ is a PMOS transistor** (indicated by the arrow on the source terminal pointing toward the gate).\n* **Gate ($G$):** Connected to ground ($V_G = 0\\text{ V}$).\n* **Drain ($D$):** Connected to ground ($V_D = 0\\text{ V}$).\n* **Source ($S$):** The top terminal where the current $I_X$ enters. Let's call the voltage at this terminal $V_X$.\n\n### 2. Why It Does Not Act as a Current Source\nBy definition, a current source must supply or sink a current that is **independent of the voltage across it** (meaning it must have a very high output resistance). \n\nIn this circuit:\n1. **Voltage-Dependent Drive ($V_{SG}$ is not constant):** \n   Because the gate is tied to ground, the source-gate voltage depends directly on the terminal voltage $V_X$:\n   $$V_{SG} = V_S - V_G = V_X - 0 = V_X$$\n\n2. **Diode-Connected Behavior:** \n   Since both the gate and drain are tied to ground ($V_G = V_D = 0$), the transistor is **diode-connected** ($V_{SD} = V_{SG} = V_X$). Once $V_X > |V_{TH}|$, the transistor turns on in the saturation region, and the current $I_X$ is given by:\n   $$I_X = \\frac{1}{2}\\mu_p C_{ox}\\frac{W}{L}(V_X - |V_{TH}|)^2$$\n\n   Because $I_X$ varies quadratically with the terminal voltage $V_X$, it behaves like a **nonlinear resistor (or diode)** rather than a constant current source.\n\n3. **Low Output Impedance:** \n   Looking into the **source** terminal of a MOSFET gives a low small-signal resistance of approximately $\\frac{1}{g_m}$, whereas a good current source requires the high output resistance ($r_o$) seen looking into the **drain** terminal.\n\n---\n\n### How to Correctly Configure a PMOS as a Current Source\nTo make $M_1$ act as a current source:\n1. Tie the **Source** to a fixed positive supply voltage ($V_{DD}$).\n2. Tie the **Gate** to a fixed bias voltage ($V_b$) so that $V_{SG} = V_{DD} - V_b$ remains constant.\n3. Draw the output current from the **Drain** terminal. (As long as $V_{SD} > V_{SG} - |V_{TH}|$, the current will remain nearly constant regardless of the drain voltage).",
        "format": "markdown",
        "sha256": "7e52ffc23a11650d0360426e1c689ea2ae05418899163a83aff376c52e5018e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS with its gate and drain grounded and source at VX, recognizes the diode-connected low impedance (about 1/gm), and concludes it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 4417,
        "total_tokens": 5529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1112,
        "output_tokens": 4417,
        "total_tokens": 5529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete analysis of the circuit shown in the figure, broken down into its topology identification, large-signal (DC) behavior, and small-signal (AC) characteristics.\n\n---\n\n### 1. Circuit Identification\n* **Topology:** **PMOS Common-Source (CS) Amplifier with Source Degeneration**.\n* **Components:**\n  * **$M_1$:** A PMOS transistor (indicated by the arrow on the top terminal pointing *inward* toward the gate). The top terminal is the **Source ($S$)**, the middle terminal is the **Gate ($G$)**, and the bottom terminal is the **Drain ($D$)**.\n  * **$R_S$:** Source degeneration resistor connected between the supply voltage ($V_{DD}$) and the source terminal. It introduces local negative feedback.\n  * **$R_D$:** Drain load resistor connected between the drain terminal and ground, converting the drain current into an output voltage ($V_{\\text{out}}$).\n\n---\n\n### 2. Large-Signal (DC) Analysis\nTo understand the DC behavior, let's sweep the input voltage $V_{\\text{in}}$ from $V_{DD}$ down to $0\\text{ V}$:\n\n1. **Cutoff Region ($V_{\\text{in}} > V_{DD} - |V_{THP}|$):**\n   * When $V_{\\text{in}}$ is close to $V_{DD}$, the source-gate voltage ($V_{SG}$) is less than the PMOS threshold voltage ($|V_{THP}|$).\n   * Transistor $M_1$ is **OFF**, meaning the drain current is $I_D = 0$.\n   * With no current flowing, the voltage drop across both resistors is zero: \n     $$V_S = V_{DD}$$\n     $$V_{\\text{out}} = I_D R_D = 0\\text{ V}$$\n\n2. **Saturation Region ($V_{\\text{out}} - |V_{THP}| < V_{\\text{in}} < V_{DD} - |V_{THP}|$):**\n   * As $V_{\\text{in}}$ drops below $V_{DD} - |V_{THP}|$, $M_1$ turns **ON** in saturation.\n   * Neglecting channel-length modulation, the drain current $I_D$ is given by:\n     $$I_D = \\frac{1}{2}\\mu_p C_{\\text{ox}}\\frac{W}{L}(V_{SG} - |V_{THP}|)^2$$\n   * Because of $R_S$, the source voltage drops as $I_D$ increases ($V_S = V_{DD} - I_D R_S$), making $V_{SG}$ dependent on $I_D$:\n     $$V_{SG} = V_S - V_{\\text{in}} = V_{DD} - I_D R_S - V_{\\text{in}}$$\n   * The output voltage increases linearly with the drain current:\n     $$V_{\\text{out}} = I_D R_D$$\n\n3. **Triode / Linear Region ($V_{\\text{in}} < V_{\\text{out}} - |V_{THP}|$):**\n   * As $V_{\\text{in}}$ decreases further toward $0\\text{ V}$, $I_D$ continues to rise. Consequently, $V_S$ drops and $V_{\\text{out}}$ ($V_D$) rises.\n   * Once the drain voltage rises enough that $V_{SD} < V_{SG} - |V_{THP}|$ (or equivalently, $V_{\\text{out}} > V_{\\text{in}} + |V_{THP}|$), $M_1$ leaves saturation and enters the **triode region**.\n\n---\n\n### 3. Small-Signal (AC) Analysis\nAssuming $M_1$ is biased in the **saturation region**, we can find the small-signal parameters:\n\n#### A. Input Impedance ($R_{\\text{in}}$)\nBecause the input signal is applied directly to the insulated gate of the MOSFET, the low-frequency input impedance is infinite:\n$$R_{\\text{in}} = \\infty$$\n\n#### B. Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)\nAn increase in $V_{\\text{in}}$ reduces $V_{SG}$, which reduces the current $I_D$ flowing into $R_D$, thereby reducing $V_{\\text{out}}$. Therefore, the amplifier is **inverting** (negative gain).\n\n* **Case 1: Neglecting channel-length modulation ($\\lambda = 0$) and body effect ($\\gamma = 0$):**\n  The effective transconductance ($G_m$) of the degenerated stage is reduced by the factor $(1 + g_m R_S)$:\n  $$G_m = \\frac{g_m}{1 + g_m R_S}$$\n  The voltage gain is simply $-G_m R_D$:\n  $$A_v = -\\frac{g_m R_D}{1 + g_m R_S} = -\\frac{R_D}{\\frac{1}{g_m} + R_S}$$\n  *(Note: This is easily remembered as the negative ratio of the total drain resistance to the total resistance in the source path).*\n\n* **Case 2: Including body effect ($\\gamma \\neq 0$, assuming the n-well bulk is tied to $V_{DD}$):**\n  Because the source is not tied to $V_{DD}$, the source-bulk voltage varies ($v_{sb} \\neq 0$). The body effect acts just like the main gate transconductance in the source path:\n  $$A_v = -\\frac{g_m R_D}{1 + (g_m + g_{mb}) R_S}$$\n\n* **Case 3: Exact gain including finite output resistance ($r_o$):**\n  $$A_v = -\\frac{g_m R_D}{1 + (g_m + g_{mb})R_S + \\frac{R_S + R_D}{r_o}}$$\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nThe output impedance is the parallel combination of $R_D$ and the resistance looking up into the drain of $M_1$ ($R_{\\text{drain}}$):\n\n* **If $\\lambda = 0$ ($r_o \\to \\infty$):**\n  $$R_{\\text{out}} = R_D$$\n\n* **If $\\lambda > 0$ ($r_o$ is finite):**\n  Source degeneration boosts the impedance looking into the drain of $M_1$:\n  $$R_{\\text{drain}} = r_o\\big[1 + (g_m + g_{mb})R_S\\big] + R_S$$\n  Thus, the total output impedance is:\n  $$R_{\\text{out}} = R_D \\parallel R_{\\text{drain}} = R_D \\parallel \\Big( r_o\\big[1 + (g_m + g_{mb})R_S\\big] + R_S \\Big)$$\n\n---\n\n### 4. Summary of the Role of $R_S$ (Source Degeneration)\nAdding $R_S$ to a standard common-source stage introduces series-series negative feedback, which provides the following trade-offs:\n1. **Decreases Voltage Gain:** Lowered by a factor of $1 + g_m R_S$.\n2. **Improves Linearity:** Makes the effective transconductance less dependent on the non-linear transistor parameter $g_m$ (when $g_m R_S \\gg 1$, $A_v \\approx -R_D / R_S$).\n3. **Increases Output Resistance:** Boosts the intrinsic drain resistance of the transistor by approximately $(1 + g_m R_S)$.\n4. **Stabilizes DC Biasing:** Makes the DC drain current less sensitive to variations in threshold voltage ($V_{THP}$) and temperature.",
        "format": "markdown",
        "sha256": "995e8fe84f6652f49604eefc21c649f312d5e6d34c0717a7bad6d0d5ee806b23"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS); the body-effect expression is also consistent with the golden solution.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 4009,
        "total_tokens": 5157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 4009,
        "total_tokens": 5157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **PMOS Common-Source (CS) Amplifier with Source Degeneration**. \n\nHere is a complete analysis of the circuit, divided into its circuit topology, large-signal (DC) behavior, and small-signal (AC) performance.\n\n---\n\n### 1. Circuit Identification & Terminals\n* **Transistor ($M_1$):** A p-channel MOSFET (PMOS), indicated by the arrow on the upper terminal pointing toward the gate.\n* **Source (S):** The top terminal of $M_1$, connected to the supply voltage $V_{DD}$ through the degeneration resistor $R_S$.\n* **Gate (G):** The input terminal driven by $V_{\\text{in}}$.\n* **Drain (D):** The bottom terminal of $M_1$, connected to the output node $V_{\\text{out}}$ and to ground through the load resistor $R_D$.\n\n---\n\n### 2. Large-Signal (DC) Analysis\nTo understand how the circuit operates over a wide range of input voltages, let us sweep $V_{\\text{in}}$ from $V_{DD}$ down to $0\\text{ V}$ (since a PMOS turns on as its gate voltage drops below its source voltage):\n\n1. **Cutoff Region ($V_{\\text{in}} \\ge V_{DD} - |V_{THP}|$):**\n   * When $V_{\\text{in}}$ is close to $V_{DD}$, the source-gate voltage $V_{SG}$ is less than the threshold voltage $|V_{THP}|$.\n   * The transistor is **OFF**, meaning no drain current flows ($I_D = 0$).\n   * Therefore, the voltage drop across $R_S$ is zero ($V_S = V_{DD}$), and the output voltage is:\n     $$V_{\\text{out}} = I_D R_D = 0\\text{ V}$$\n\n2. **Saturation Region ($V_{\\text{in}} < V_{DD} - |V_{THP}|$ and $V_{\\text{out}} \\le V_{\\text{in}} + |V_{THP}|$):**\n   * As $V_{\\text{in}}$ drops below $V_{DD} - |V_{THP}|$, $M_1$ turns on in the saturation region.\n   * The source voltage is given by $V_S = V_{DD} - I_D R_S$, so $V_{SG} = V_{DD} - I_D R_S - V_{\\text{in}}$.\n   * Neglecting channel-length modulation ($\\lambda = 0$), the drain current is:\n     $$I_D = \\frac{1}{2}\\mu_p C_{ox} \\frac{W}{L} \\left(V_{DD} - I_D R_S - V_{\\text{in}} - |V_{THP}|\\right)^2$$\n   * The output voltage rises as $I_D$ increases:\n     $$V_{\\text{out}} = I_D R_D$$\n\n3. **Triode (Linear) Region ($V_{\\text{out}} > V_{\\text{in}} + |V_{THP}|$):**\n   * As $V_{\\text{in}}$ continues to decrease toward $0\\text{ V}$, $I_D$ increases, causing $V_{\\text{out}}$ (the drain voltage) to rise.\n   * Once $V_{\\text{out}}$ exceeds $V_{\\text{in}} + |V_{THP}|$, the source-drain voltage $V_{SD}$ drops below the overdrive voltage ($V_{SG} - |V_{THP}|$), pushing $M_1$ into the **triode region**.\n\n---\n\n### 3. Small-Signal (AC) Analysis\nAssuming $M_1$ is biased in the **saturation region**, we can find the small-signal voltage gain ($A_v$), input resistance ($R_{\\text{in}}$), and output resistance ($R_{\\text{out}}$).\n\n#### A. Neglecting Channel-Length Modulation ($\\lambda = 0 \\implies r_o \\to \\infty$) and Body Effect ($\\gamma = 0$)\nLet $i_d$ be the small-signal drain current flowing downward from the source to the drain:\n1. Since $V_{DD}$ is an AC ground, the small-signal source voltage is:\n   $$v_s = -i_d R_S$$\n2. The small-signal source-to-gate voltage is:\n   $$v_{sg} = v_s - v_{\\text{in}} = -i_d R_S - v_{\\text{in}}$$\n3. Substituting this into the drain current equation $i_d = g_m v_{sg}$:\n   $$i_d = g_m(-i_d R_S - v_{\\text{in}}) \\implies i_d(1 + g_m R_S) = -g_m v_{\\text{in}}$$\n   $$i_d = -\\frac{g_m}{1 + g_m R_S} v_{\\text{in}}$$\n4. Since $v_{\\text{out}} = i_d R_D$, the **small-signal voltage gain ($A_v$)** is:\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -\\frac{g_m R_D}{1 + g_m R_S} = -\\frac{R_D}{\\frac{1}{g_m} + R_S}$$\n\n*(Note: Just like an NMOS common-source stage, the gain is **negative** because an increase in $V_{\\text{in}}$ reduces $V_{SG}$, which decreases the current $I_D$ and reduces $V_{\\text{out}}$).*\n\n* **Input Resistance ($R_{\\text{in}}$):**\n  $$R_{\\text{in}} = \\infty$$\n* **Output Resistance ($R_{\\text{out}}$):**\n  $$R_{\\text{out}} = R_D$$\n\n---\n\n#### B. Including Channel-Length Modulation ($r_o < \\infty$) and Body Effect ($g_{mb} \\neq 0$)\nIf the transistor's finite output resistance $r_o$ and body effect transconductance $g_{mb}$ are considered:\n\n* **Output Resistance ($R_{\\text{out}}$):**\n  The resistance looking up into the drain of the degenerated PMOS transistor is boosted by the source resistor $R_S$:\n  $$R_{\\text{drain}} = r_o \\left[1 + (g_m + g_{mb})R_S\\right] + R_S$$\n  Combining this in parallel with the load resistor $R_D$ gives the total output resistance:\n  $$R_{\\text{out}} = R_D \\parallel \\left( r_o \\left[1 + (g_m + g_{mb})R_S\\right] + R_S \\right)$$\n\n* **Effective Transconductance ($G_m$):**\n  $$G_m = \\frac{g_m r_o}{R_S + \\left[1 + (g_m + g_{mb})R_S\\right]r_o}$$\n\n* **Exact Voltage Gain ($A_v$):**\n  $$A_v = -G_m R_{\\text{out}} = -\\frac{g_m r_o R_D}{R_D + R_S + \\left[1 + (g_m + g_{mb})R_S\\right]r_o}$$\n\n---\n\n### 4. Summary of the Role of $R_S$ (Source Degeneration)\nAdding the resistor $R_S$ in series with the source introduces **negative series-series (current-voltage) feedback**, which has the following effects compared to a standard CS stage:\n1. **Decreases Voltage Gain:** By a factor of $(1 + g_m R_S)$.\n2. **Improves Linearity:** Makes the effective transconductance less sensitive to variations in $g_m$ as the signal swings.\n3. **Increases Output Impedance:** Boosts the impedance looking into the drain by approximately $(1 + g_m R_S)$.",
        "format": "markdown",
        "sha256": "511713b79e2cbebb3713bca806285f14ca3791f6e31bce2d1090681c5d4d60e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a PMOS common-source stage with source degeneration and gives the inverting gain −gm RD/(1 + gm RS), satisfying the full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 4079,
        "total_tokens": 5227,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2266,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 4079,
        "total_tokens": 5227,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2266,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Identification\nThe figure shows a **PMOS Common-Source (CS) Amplifier with Source Degeneration**.\n\n* **Transistor ($M_1$):** A PMOS MOSFET (indicated by the arrow on the top terminal pointing *inward* toward the gate).\n  * **Source ($S$):** Top terminal connected to $V_{DD}$ via resistor $R_S$.\n  * **Gate ($G$):** Middle terminal driven by the input voltage $V_{\\text{in}}$.\n  * **Drain ($D$):** Bottom terminal connected to the output node $V_{\\text{out}}$ and to ground via resistor $R_D$.\n* **Topology:** Because the input signal is applied to the **Gate** and the output is taken from the **Drain**, this is a **Common-Source** stage. The resistor $R_S$ acts as a **source degeneration resistor**.\n\n---\n\n### 2. Large-Signal (DC) Operation\nAs the input voltage $V_{\\text{in}}$ sweeps from $V_{DD}$ down to $0\\text{ V}$, the transistor passes through three regions of operation (assuming threshold voltage $V_{THP} < 0$):\n\n1. **Cutoff Region ($V_{\\text{in}} \\ge V_{DD} - |V_{THP}|$):**\n   * The source-gate voltage is too small to turn the transistor on ($V_{SG} \\le |V_{THP}|$).\n   * No drain current flows ($I_D = 0$).\n   * The source voltage is $V_S = V_{DD}$, and the output voltage is:\n     $$V_{\\text{out}} = I_D R_D = 0\\text{ V}$$\n\n2. **Saturation Region ($V_{\\text{out}} - |V_{THP}| \\le V_{\\text{in}} < V_{DD} - |V_{THP}|$):**\n   * As $V_{\\text{in}}$ drops below $V_{DD} - |V_{THP}|$, $M_1$ turns on in saturation because the drain voltage ($V_{\\text{out}}$) starts near $0\\text{ V}$, satisfying $V_{SD} \\ge V_{SG} - |V_{THP}|$ (or equivalently, $V_{\\text{out}} \\le V_{\\text{in}} + |V_{THP}|$).\n   * Ignoring channel-length modulation, the drain current is:\n     $$I_D = \\frac{1}{2}\\mu_p C_{\\text{ox}}\\frac{W}{L}\\left(V_{SG} - |V_{THP}|\\right)^2 = \\frac{1}{2}\\mu_p C_{\\text{ox}}\\frac{W}{L}\\left(V_{DD} - I_D R_S - V_{\\text{in}} - |V_{THP}|\\right)^2$$\n   * As $V_{\\text{in}}$ decreases, $I_D$ increases, causing the source voltage $V_S = V_{DD} - I_D R_S$ to drop and the output voltage $V_{\\text{out}} = I_D R_D$ to rise.\n\n3. **Triode (Linear) Region ($V_{\\text{in}} < V_{\\text{out}} - |V_{THP}|$):**\n   * As $V_{\\text{in}}$ drops further and $V_{\\text{out}}$ rises, the two voltages eventually cross the boundary $V_{\\text{out}} = V_{\\text{in}} + |V_{THP}|$.\n   * Beyond this point ($V_{\\text{out}} > V_{\\text{in}} + |V_{THP}|$), $M_1$ enters the **triode region** and acts like a voltage-controlled resistor ($R_{\\text{on}}$). \n   * For very low $V_{\\text{in}}$, $V_{\\text{out}}$ approaches a resistive divider limit:\n     $$V_{\\text{out,max}} \\approx V_{DD} \\frac{R_D}{R_D + R_S + R_{\\text{on}}}$$\n\n---\n\n### 3. Small-Signal (AC) Analysis (in Saturation)\n\n#### Case A: Neglecting Channel-Length Modulation ($\\lambda = 0 \\implies r_o \\to \\infty$) and Body Effect ($\\gamma = 0$)\n\n* **Input Resistance ($R_{\\text{in}}$):**\n  Since the input is connected solely to the insulated gate of $M_1$:\n  $$R_{\\text{in}} = \\infty$$\n\n* **Output Resistance ($R_{\\text{out}}$):**\n  Looking into the output node with $r_o \\to \\infty$, the drain of $M_1$ looks like an ideal current source (infinite impedance):\n  $$R_{\\text{out}} = R_D$$\n\n* **Small-Signal Voltage Gain ($A_v$):**\n  When $v_{\\text{in}}$ increases slightly, $v_{gs}$ becomes less negative ($v_{sg}$ decreases), which **reduces** the current $I_D$ flowing into $R_D$, causing $v_{\\text{out}}$ to **decrease**. Therefore, the gain is **negative (inverting)**—just like an NMOS common-source stage:\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -\\frac{g_m R_D}{1 + g_m R_S} = -\\frac{R_D}{\\dfrac{1}{g_m} + R_S}$$\n  *(Words rule: Gain = $-\\frac{\\text{Total Resistance at Drain}}{\\text{Intrinsic Source Resistance } (1/g_m) + \\text{Total Resistance at Source}}$).*\n\n---\n\n#### Case B: Including Channel-Length Modulation ($r_o < \\infty$) and Body Effect ($g_{mb} \\neq 0$)\n*(Note: If the PMOS n-well/bulk is tied directly to its own source terminal, $g_{mb} = 0$. If the n-well is tied to $V_{DD}$, $g_{mb} \\neq 0$.)*\n\n* **Effective Transconductance ($G_m$):**\n  $$G_m = \\frac{g_m r_o}{R_S + \\left[1 + (g_m + g_{mb})R_S\\right]r_o}$$\n\n* **Output Resistance ($R_{\\text{out}}$):**\n  The resistance looking up into the drain of $M_1$ is boosted by the source degeneration resistor $R_S$:\n  $$R_{\\text{drain}} = R_S + \\left[1 + (g_m + g_{mb})R_S\\right]r_o \\approx \\left[1 + (g_m + g_{mb})r_o\\right]R_S + r_o$$\n  Combining this in parallel with $R_D$:\n  $$R_{\\text{out}} = R_D \\parallel R_{\\text{drain}}$$\n\n* **Exact Voltage Gain ($A_v$):**\n  $$A_v = -G_m R_{\\text{out}} = -\\frac{g_m r_o R_D}{R_D + R_S + \\left[1 + (g_m + g_{mb})R_S\\right]r_o}$$\n\n---\n\n### 4. Purpose of the Degeneration Resistor ($R_S$)\nAdding $R_S$ introduces local negative feedback, which provides several design trade-offs compared to a standard common-source stage:\n1. **Higher Linearity:** Variations in $g_m$ with signal swing have less impact on the gain when $R_S \\gg 1/g_m$, as the gain approaches the ratio of passive resistors ($A_v \\approx -R_D / R_S$).\n2. **Higher Output Impedance:** Boosts the resistance looking into the drain by a factor of roughly $(1 + g_m R_S)$.\n3. **Lower Voltage Gain & Reduced Voltage Headroom:** The DC voltage drop $I_D R_S$ reduces the available voltage swing before $M_1$ enters the triode region.",
        "format": "markdown",
        "sha256": "4cef8a13362719ca5f3de370f9df8942471da0e0ed0c4f06aa005b18888423a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gm RD/(1 + gm RS), satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 4078,
        "total_tokens": 5226,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2269,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 4078,
        "total_tokens": 5226,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2269,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is an **NMOS Common-Drain (CD) Amplifier**, more commonly referred to as a **Source Follower**. \n\nHere is a complete large-signal (DC) and small-signal (AC) analysis of the circuit.\n\n---\n\n### 1. Circuit Overview\n* **Transistor ($M_1$):** An N-channel MOSFET (NMOS) with its drain connected directly to the positive supply ($V_{DD}$), which acts as an AC ground.\n* **Input ($V_{\\text{in}}$):** Applied to the gate terminal.\n* **Output ($V_{\\text{out}}$):** Taken from the source terminal.\n* **Load ($R_S$):** A source resistor connected between the source terminal and ground, providing a path for the DC bias current.\n\nIt is called a **Source Follower** because the output voltage at the source ($V_{\\text{out}}$) \"follows\" the input voltage at the gate ($V_{\\text{in}}$), shifted down by the gate-to-source voltage ($V_{GS}$):\n$$V_{\\text{out}} = V_{\\text{in}} - V_{GS}$$\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nAs $V_{\\text{in}}$ sweeps from $0\\text{ V}$ to $V_{DD}$, the transistor passes through different operating regions:\n\n1. **Cutoff Region ($V_{\\text{in}} < V_{TH}$):**\n   * When the input voltage is less than the threshold voltage ($V_{TH}$), $M_1$ is **OFF**.\n   * No drain current flows ($I_D = 0$), so the voltage drop across $R_S$ is zero:\n     $$V_{\\text{out}} = 0\\text{ V}$$\n\n2. **Saturation Region ($V_{TH} \\le V_{\\text{in}} \\le V_{DD} + V_{TH}$):**\n   * Once $V_{\\text{in}} > V_{TH}$, $M_1$ turns **ON**.\n   * The condition for saturation is $V_{DS} \\ge V_{GS} - V_{TH}$, which translates to:\n     $$V_{DD} - V_{\\text{out}} \\ge V_{\\text{in}} - V_{\\text{out}} - V_{TH} \\implies V_{\\text{in}} \\le V_{DD} + V_{TH}$$\n   * Because $V_{\\text{in}}$ normally does not exceed the supply rail $V_{DD}$, **a source follower is guaranteed to operate in the saturation region whenever it is ON** (for $V_{\\text{in}} \\le V_{DD}$).\n   * Using KCL at the output node (neglecting channel-length modulation):\n     $$I_D = \\frac{1}{2}\\mu_n C_{\\text{ox}} \\frac{W}{L} (V_{\\text{in}} - V_{\\text{out}} - V_{TH})^2 = \\frac{V_{\\text{out}}}{R_S}$$\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\nAssuming $M_1$ is biased in the saturation region, we can determine the three fundamental amplifier parameters: **Voltage Gain ($A_v$)**, **Input Impedance ($R_{\\text{in}}$)**, and **Output Impedance ($R_{\\text{out}}$)**.\n\n#### A. Ideal Case (Neglecting Body Effect and Channel-Length Modulation)\n* **Voltage Gain ($A_v$):**\n  $$v_{\\text{out}} = g_m v_{gs} R_S = g_m (v_{\\text{in}} - v_{\\text{out}}) R_S$$\n  Solving for $\\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_S}{1 + g_m R_S} = \\frac{R_S}{\\frac{1}{g_m} + R_S}$$\n  *(Note: This acts like a voltage divider between the intrinsic source resistance $1/g_m$ and the load resistor $R_S$. The gain is always positive and slightly less than $1$.)*\n\n* **Input Resistance ($R_{\\text{in}}$):**\n  Because the input is connected solely to the insulated gate of the MOSFET:\n  $$R_{\\text{in}} = \\infty$$\n\n* **Output Resistance ($R_{\\text{out}}$):**\n  Looking into the output node with the input grounded ($v_{\\text{in}} = 0$), the resistance looking up into the source of $M_1$ is $\\frac{1}{g_m}$, in parallel with $R_S$:\n  $$R_{\\text{out}} = R_S \\parallel \\frac{1}{g_m} = \\frac{R_S}{1 + g_m R_S}$$\n\n---\n\n#### B. Exact Case (Including Body Effect $g_{mb}$ and Channel-Length Modulation $r_o$)\nIn standard CMOS processes where the NMOS bulk (substrate) is tied to ground, changes in $V_{\\text{out}}$ change the source-to-bulk voltage ($V_{SB} = V_{\\text{out}}$). Therefore, the **body effect** is significant in this circuit. Additionally, the transistor output resistance $r_o$ appears directly in parallel with $R_S$ (since the drain is at AC ground).\n\n* **Voltage Gain ($A_v$):**\n  $$A_v = \\frac{g_m (R_S \\parallel r_o)}{1 + (g_m + g_{mb})(R_S \\parallel r_o)} = \\frac{g_m}{g_m + g_{mb} + \\frac{1}{R_S} + \\frac{1}{r_o}}$$\n  *(Key Takeaway: Even if $R_S \\to \\infty$ and $r_o \\to \\infty$, the maximum possible gain is limited by the body effect to $A_{v,\\text{max}} = \\frac{g_m}{g_m + g_{mb}} \\approx 0.7 \\text{ to } 0.85$.)*\n\n* **Output Resistance ($R_{\\text{out}}$):**\n  $$R_{\\text{out}} = R_S \\parallel r_o \\parallel \\frac{1}{g_m + g_{mb}} = \\frac{1}{g_m + g_{mb} + \\frac{1}{R_S} + \\frac{1}{r_o}}$$\n\n---\n\n### 4. Summary of Characteristics & Applications\n\n| Parameter | Characteristic | Typical Value |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | Non-inverting, slightly less than unity | $0.7 \\text{ to } 0.95\\text{ V/V}$ |\n| **Input Impedance ($R_{\\text{in}}$)** | Extremely high | $\\infty$ (at low frequencies) |\n| **Output Impedance ($R_{\\text{out}}$)** | Low | $\\approx \\frac{1}{g_m}$ (typically hundreds of $\\Omega$) |\n\n#### Primary Applications:\n1. **Voltage Buffer (Impedance Transformer):** Because it has a very high input impedance and a low output impedance, it is used after a high-gain stage (like a Common-Source amplifier) to drive a low-resistance load without attenuating the voltage gain.\n2. **DC Level Shifter:** It drops the DC voltage level of a signal by a predictable amount ($V_{GS}$) while preserving the AC signal amplitude.",
        "format": "markdown",
        "sha256": "17df72efac2c8ae7c46d5b9b8c8c9febaf974c2290fe9fdb13d4d57f85eaf4da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, less-than-unity gain gm·RS/(1 + gm·RS). The supplemental output-resistance and body-effect discussion does not change the essential answer.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 3736,
        "total_tokens": 4879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2050,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 3736,
        "total_tokens": 4879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2050,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a classic **Common-Drain (CD) Amplifier**, more commonly referred to as an **NMOS Source Follower**. \n\n*(Note: This specific diagram is from Behzad Razavi’s textbook, \"Design of Analog CMOS Integrated Circuits\". The analysis below follows the standard conventions and notation used in that text.)*\n\n---\n\n### 1. Circuit Overview & Purpose\n* **Topology:** The input signal ($V_{\\text{in}}$) is applied to the **Gate**, the output ($V_{\\text{out}}$) is taken from the **Source**, and the **Drain** is tied directly to the DC supply ($V_{DD}$), which acts as an AC ground.\n* **Primary Function:** The source follower causes the source voltage ($V_{\\text{out}}$) to \"follow\" the gate voltage ($V_{\\text{in}}$) minus a Gate-Source voltage drop ($V_{GS}$). \n* **Applications:** It is primarily used as a **voltage buffer** (to drive low-impedance loads due to its high input impedance and low output impedance) or as a **DC level shifter**.\n\n---\n\n### 2. Large-Signal (DC) Analysis\nLet us analyze the behavior of the circuit as $V_{\\text{in}}$ increases from $0\\text{ V}$ to $V_{DD}$:\n\n#### **A. Cutoff Region ($V_{\\text{in}} < V_{TH}$)**\n* When the input voltage is below the transistor's threshold voltage ($V_{TH}$), $M_1$ is **OFF**.\n* No drain current flows ($I_D = 0$), so the voltage drop across $R_S$ is zero:\n  $$V_{\\text{out}} = 0\\text{ V}$$\n\n#### **B. Saturation Region ($V_{\\text{in}} \\ge V_{TH}$)**\n* Once $V_{\\text{in}} > V_{TH}$, $M_1$ turns **ON**. \n* For $M_1$ to be in saturation, its drain-source voltage must satisfy $V_{DS} \\ge V_{GS} - V_{TH}$, which simplifies to $V_D \\ge V_G - V_{TH}$. Since $V_D = V_{DD}$ and $V_G = V_{\\text{in}} \\le V_{DD}$, the condition $V_{DD} > V_{\\text{in}} - V_{TH}$ is **always satisfied**. Thus, once turned on, $M_1$ always operates in the **saturation region**.\n* Neglecting channel-length modulation ($\\lambda = 0$), the drain current flows through $R_S$, giving the large-signal governing equation:\n  $$I_D = \\frac{1}{2}\\mu_n C_{\\text{ox}} \\frac{W}{L} (V_{\\text{in}} - V_{\\text{out}} - V_{TH})^2 = \\frac{V_{\\text{out}}}{R_S}$$\n* **Body Effect Consideration:** Because the source terminal ($V_{\\text{out}}$) is not tied to ground (while the NMOS substrate/bulk typically is), the source-bulk voltage $V_{SB} = V_{\\text{out}}$ increases as $V_{\\text{in}}$ increases. This causes the threshold voltage $V_{TH}$ to increase with $V_{\\text{out}}$:\n  $$V_{TH} = V_{TH0} + \\gamma \\left( \\sqrt{|2\\Phi_F + V_{\\text{out}}|} - \\sqrt{|2\\Phi_F|} \\right)$$\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\nAssuming $M_1$ is biased in saturation, we can find its small-signal parameters:\n\n#### **A. Voltage Gain ($A_v$)**\n1. **Ideal Case (Neglecting Body Effect $\\gamma=0$ and Channel-Length Modulation $\\lambda=0$):**\n   The small-signal drain current is $i_d = g_m v_{gs} = g_m(v_{\\text{in}} - v_{\\text{out}})$. Setting $v_{\\text{out}} = i_d R_S$:\n   $$v_{\\text{out}} = g_m(v_{\\text{in}} - v_{\\text{out}})R_S$$\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_S}{1 + g_m R_S} = \\frac{R_S}{\\frac{1}{g_m} + R_S}$$\n   *(Notice that if $g_m R_S \\gg 1$, the gain approaches $1$, meaning $V_{\\text{out}}$ closely follows $V_{\\text{in}}$.)*\n\n2. **Exact Case (Including Body Effect $g_{mb}$ and Channel-Length Modulation $r_O$):**\n   Since the drain is at AC ground and the source is at $V_{\\text{out}}$, the transistor output resistance $r_O$ appears directly in parallel with $R_S$. Furthermore, the body effect acts like a dependent current source $g_{mb}v_{bs} = -g_{mb}v_{\\text{out}}$, which is equivalent to a resistor of value $\\frac{1}{g_{mb}}$ in parallel with $R_S$:\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m (R_S \\parallel r_O)}{1 + (g_m + g_{mb})(R_S \\parallel r_O)} = \\frac{R_S}{\\frac{1}{g_m} + (1 + \\eta)R_S} \\quad \\text{(for } r_O \\to \\infty\\text{)}$$\n   where $\\eta = \\frac{g_{mb}}{g_m}$. \n   *(Key takeaway: Due to the body effect, even if $R_S \\to \\infty$, the voltage gain is strictly less than unity and limited to $\\frac{1}{1+\\eta} \\approx 0.7 \\text{ to } 0.85$.)*\n\n#### **B. Input Impedance ($R_{\\text{in}}$)**\nLooking directly into the gate terminal at low-to-medium frequencies, the insulated gate draws no current:\n$$R_{\\text{in}} = \\infty$$\n\n#### **C. Output Impedance ($R_{\\text{out}}$)**\nTo find the output resistance, we ground the input ($v_{\\text{in}} = 0$) and look into the $V_{\\text{out}}$ terminal. We see the resistor $R_S$ in parallel with the impedance looking up into the source of $M_1$:\n* **Without non-idealities ($\\lambda = 0, \\gamma = 0$):**\n  $$R_{\\text{out}} = R_S \\parallel \\frac{1}{g_m} = \\frac{R_S}{1 + g_m R_S}$$\n* **With non-idealities ($\\lambda \\neq 0, \\gamma \\neq 0$):**\n  $$R_{\\text{out}} = R_S \\parallel r_O \\parallel \\frac{1}{g_m} \\parallel \\frac{1}{g_{mb}} = \\frac{1}{g_m + g_{mb} + \\frac{1}{r_O} + \\frac{1}{R_S}} \\approx \\frac{1}{g_m + g_{mb}}$$\n\n---\n\n### 4. Summary of Characteristics\n\n| Parameter | Expression (Approximate) | Typical Value / Characteristic |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\frac{g_m R_S}{1 + (g_m + g_{mb})R_S}$ | Positive, slightly less than $1$ (Non-inverting) |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\infty$ | Very High (Limited only by gate capacitances at high frequencies) |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\frac{1}{g_m + g_{mb}} \\parallel R_S$ | Low (Typically a few hundred ohms to a few kilo-ohms) |\n| **Drawbacks** | Nonlinearity & Headroom | Suffers from nonlinearity due to $V_{TH}$ dependence on $V_{\\text{out}}$ (body effect) and limits voltage swing by $V_{GS}$. |",
        "format": "markdown",
        "sha256": "7f49a57ca085d20b08fe089c33598d7707afb16108c417cb6075052d0f25ad36"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as gm·RS/(1 + gm·RS). The additional body-effect and output-resistance analysis does not undermine the essential answer.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4226,
        "total_tokens": 5369,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2356,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4226,
        "total_tokens": 5369,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2356,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Common-Drain (CD) Amplifier**, more commonly referred to as a **Source Follower**. \n\nIn this configuration, the input signal is applied to the **gate** of the NMOS transistor ($M_1$), the output is taken from the **source**, and the **drain** is connected directly to the DC power supply ($V_{DD}$), which acts as an AC ground.\n\nBelow is a complete large-signal (DC) and small-signal (AC) analysis of the circuit.\n\n---\n\n### 1. Primary Function (Why use this circuit?)\nThe source follower acts as a **voltage buffer**. Its primary characteristics are:\n* **Voltage gain close to unity ($\\approx 1$):** The output voltage \"follows\" the input voltage (with a DC level shift).\n* **Very high input impedance:** It draws almost no current from the preceding stage.\n* **Low output impedance:** It can effectively drive low-resistance loads without significant signal attenuation.\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nAs $V_{\\text{in}}$ varies from $0\\text{ V}$ to $V_{DD}$, the circuit operates in two main regions:\n\n1. **Cutoff Region ($V_{\\text{in}} < V_{TH}$):**\n   * When the input voltage is below the threshold voltage ($V_{TH}$) of $M_1$, the transistor is **OFF**.\n   * No drain current flows ($I_D = 0$).\n   * Therefore, the output voltage is pulled to ground through the resistor $R_S$:\n     $$V_{\\text{out}} = 0\\text{ V}$$\n\n2. **Saturation Region ($V_{\\text{in}} > V_{TH}$):**\n   * Because the drain is tied to $V_{DD}$, as long as $V_{\\text{in}} - V_{TH} < V_{DD}$, the drain-to-source voltage satisfies $V_{DS} > V_{GS} - V_{TH}$. Thus, **as soon as $M_1$ turns on, it operates in the saturation region.**\n   * Neglecting channel-length modulation, the drain current is equal to the current flowing through $R_S$:\n     $$I_D = \\frac{1}{2}\\mu_n C_{\\text{ox}}\\frac{W}{L}(V_{GS} - V_{TH})^2 = \\frac{V_{\\text{out}}}{R_S}$$\n   * Substituting $V_{GS} = V_{\\text{in}} - V_{\\text{out}}$ gives the input-output relationship:\n     $$\\frac{1}{2}\\mu_n C_{\\text{ox}}\\frac{W}{L}(V_{\\text{in}} - V_{\\text{out}} - V_{TH})^2 = \\frac{V_{\\text{out}}}{R_S}$$\n   * **Note on Body Effect:** Because the source is not grounded ($V_S = V_{\\text{out}}$) and the transistor bulk/body is typically grounded ($V_B = 0$), the source-to-bulk voltage $V_{SB} = V_{\\text{out}}$ increases as $V_{\\text{out}}$ rises. This increases the threshold voltage $V_{TH}$ according to:\n     $$V_{TH} = V_{TH0} + \\gamma \\left(\\sqrt{|2\\phi_F| + V_{\\text{out}}} - \\sqrt{|2\\phi_F|}\\right)$$\n     This introduces nonlinearity into the follower's transfer characteristic.\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\nAssuming the transistor is biased in saturation, we can replace $M_1$ with its small-signal model to find the **voltage gain ($A_v$)**, **input resistance ($R_{\\text{in}}$)**, and **output resistance ($R_{\\text{out}}$)**.\n\n#### A. Small-Signal Voltage Gain ($A_v$)\nApplying Kirchhoff’s Current Law (KCL) at the output (source) node, including body effect ($g_{mb}$) and channel-length modulation ($r_o$):\n\n$$g_m v_{gs} + g_{mb} v_{bs} = \\frac{v_{\\text{out}}}{R_S} + \\frac{v_{\\text{out}}}{r_o}$$\n\nSince $v_{gs} = v_{\\text{in}} - v_{\\text{out}}$ and $v_{bs} = 0 - v_{\\text{out}} = -v_{\\text{out}}$:\n\n$$g_m(v_{\\text{in}} - v_{\\text{out}}) - g_{mb}v_{\\text{out}} = v_{\\text{out}}\\left(\\frac{1}{R_S} + \\frac{1}{r_o}\\right)$$\n\nSolving for the voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n\n$$A_v = \\frac{g_m}{g_m + g_{mb} + \\frac{1}{R_S} + \\frac{1}{r_o}} = \\frac{g_m (R_S \\parallel r_o)}{1 + (g_m + g_{mb})(R_S \\parallel r_o)}$$\n\n* **Simplified Case** (ignoring channel-length modulation $r_o \\to \\infty$ and body effect $g_{mb} = 0$):\n  $$A_v = \\frac{g_m R_S}{1 + g_m R_S}$$\n  *Observation:* The gain is positive (non-inverting) and is always slightly **less than $1$**. Even if $R_S \\to \\infty$, the body effect limits the maximum achievable gain to $\\frac{g_m}{g_m + g_{mb}} \\approx \\frac{1}{1 + \\eta}$ (typically around $0.7\\text{ to }0.85$).\n\n---\n\n#### B. Input Resistance ($R_{\\text{in}}$)\nBecause the input is connected solely to the insulated gate terminal of the MOSFET, at low-to-moderate frequencies:\n$$R_{\\text{in}} = \\infty$$\n\n---\n\n#### C. Output Resistance ($R_{\\text{out}}$)\nTo find $R_{\\text{out}}$, we ground the input ($v_{\\text{in}} = 0$) and apply a test voltage $v_x$ at the output node to measure the test current $i_x$. \nWith $v_{\\text{in}} = 0$, we have $v_{gs} = -v_x$ and $v_{bs} = -v_x$. Using KCL at the output node:\n\n$$i_x = \\frac{v_x}{R_S} + \\frac{v_x}{r_o} - g_m v_{gs} - g_{mb} v_{bs}$$\n$$i_x = v_x \\left( \\frac{1}{R_S} + \\frac{1}{r_o} + g_m + g_{mb} \\right)$$\n\nTherefore, the output resistance is:\n$$R_{\\text{out}} = \\frac{v_x}{i_x} = \\frac{1}{g_m + g_{mb} + \\frac{1}{R_S} + \\frac{1}{r_o}} = \\frac{1}{g_m} \\parallel \\frac{1}{g_{mb}} \\parallel R_S \\parallel r_o$$\n\n* **Simplified Case** (ignoring $r_o$ and $g_{mb}$, and assuming $R_S \\gg \\frac{1}{g_m}$):\n  $$R_{\\text{out}} = \\frac{1}{g_m} \\parallel R_S \\approx \\frac{1}{g_m}$$\n\n---\n\n### Summary Table\n\n| Parameter | Exact Expression (with $g_{mb}$ and $r_o$) | Simplified Expression ($\\lambda = 0, \\gamma = 0$) | Typical Value / Behavior |\n| :--- | :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\dfrac{g_m (R_S \\parallel r_o)}{1 + (g_m + g_{mb})(R_S \\parallel r_o)}$ | $\\dfrac{g_m R_S}{1 + g_m R_S}$ | $< 1$ (Non-inverting, close to unity) |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\infty$ | $\\infty$ | Extremely High |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\dfrac{1}{g_m + g_{mb}} \\parallel R_S \\parallel r_o$ | $\\dfrac{1}{g_m} \\parallel R_S$ | Low (typically a few hundred $\\Omega$ to a few $\\text{k}\\Omega$) |",
        "format": "markdown",
        "sha256": "5de3ec9bee239d16f34482e99199fa9ecc334e9706bc40a893cb8d0f2f6822df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as gm·RS/(1 + gm·RS), matching the full-credit rule. The additional body-effect and output-resistance analysis is supplementary.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 3930,
        "total_tokens": 5073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 3930,
        "total_tokens": 5073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Common-Gate (CG) Amplifier** stage using an NMOS transistor ($M_1$). \n\n* **Gate ($G$):** Tied directly to the constant supply voltage $V_{DD}$ (acts as an AC ground).\n* **Source ($S$):** Connected to the input voltage $V_{\\text{in}}$.\n* **Drain ($D$):** Connected to the output node $V_{\\text{out}}$ and pulled up to $V_{DD}$ through the drain resistor $R_D$.\n\nBelow is both the **Large-Signal (DC)** analysis and the **Small-Signal (AC)** analysis of the circuit.\n\n---\n\n### 1. Large-Signal Analysis ($V_{\\text{out}}$ vs. $V_{\\text{in}}$)\n\nLet us analyze the circuit behavior by sweeping $V_{\\text{in}}$ from $V_{DD}$ down to $0\\text{ V}$ (assuming $V_{TH}$ is the threshold voltage of $M_1$):\n\n* **Terminal Voltages:**\n  * $V_G = V_{DD}$\n  * $V_S = V_{\\text{in}}$\n  * $V_D = V_{\\text{out}} = V_{DD} - I_D R_D$\n  * $V_{GS} = V_{DD} - V_{\\text{in}}$\n\n#### **Region 1: Cutoff ($M_1$ is OFF)**\nFor the transistor to be OFF, the gate-source voltage must be less than the threshold voltage ($V_{GS} \\le V_{TH}$):\n$$V_{DD} - V_{\\text{in}} \\le V_{TH} \\implies V_{\\text{in}} \\ge V_{DD} - V_{TH}$$\n\n* **Drain Current:** $I_D = 0$\n* **Output Voltage:** \n  $$V_{\\text{out}} = V_{DD}$$\n\n---\n\n#### **Region 2: Saturation**\nAs $V_{\\text{in}}$ drops below $V_{DD} - V_{TH}$, $M_1$ turns ON. Since $V_{\\text{out}}$ starts near $V_{DD}$, the transistor initially enters the **saturation region**. \n\nThe condition for saturation is $V_{DS} \\ge V_{GS} - V_{TH}$, which simplifies to:\n$$V_D \\ge V_G - V_{TH} \\implies V_{\\text{out}} \\ge V_{DD} - V_{TH}$$\n\nNeglecting channel-length modulation ($\\lambda = 0$) and body effect, the drain current is:\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n\n* **Output Voltage:**\n  $$V_{\\text{out}} = V_{DD} - \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L} R_D (V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n  *(As $V_{\\text{in}}$ decreases, $I_D$ increases and $V_{\\text{out}}$ drops quadratically.)*\n\n---\n\n#### **Region 3: Triode (Linear) Region**\nAs $V_{\\text{in}}$ continues to decrease, $V_{\\text{out}}$ eventually falls below $V_{DD} - V_{TH}$ (which occurs when the voltage drop across $R_D$ exceeds $V_{TH}$, i.e., $I_D R_D > V_{TH}$).\n\nThe transition input voltage $V_{\\text{in,sat}\\rightarrow\\text{tri}}$ is found by setting $I_D R_D = V_{TH}$:\n$$V_{\\text{in,sat}\\rightarrow\\text{tri}} = V_{DD} - V_{TH} - \\sqrt{\\frac{2 V_{TH}}{\\mu_n C_{ox} (W/L) R_D}}$$\n\nFor $V_{\\text{in}} < V_{\\text{in,sat}\\rightarrow\\text{tri}}$, $M_1$ operates in the **triode region**, and the drain current is governed by:\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L} \\left[ 2(V_{DD} - V_{\\text{in}} - V_{TH})(V_{\\text{out}} - V_{\\text{in}}) - (V_{\\text{out}} - V_{\\text{in}})^2 \\right]$$\nwhere $V_{\\text{out}} = V_{DD} - I_D R_D$.\n\n*(Note: Due to the **body effect**, as $V_{\\text{in}}$ increases, the source-bulk voltage $V_{SB}$ increases, causing $V_{TH}$ to increase as well).*\n\n---\n\n### 2. Small-Signal Analysis (AC Parameters)\n\nAssuming $M_1$ is biased in the **saturation region**, we can find the small-signal voltage gain ($A_v$), input resistance ($R_{\\text{in}}$), and output resistance ($R_{\\text{out}}$).\n\n#### **Case A: Neglecting Channel-Length Modulation ($\\lambda = 0$) and Body Effect ($\\gamma = 0$)**\n1. **Small-Signal Gate-Source Voltage:**\n   $$v_{gs} = v_g - v_s = 0 - v_{\\text{in}} = -v_{\\text{in}}$$\n2. **Voltage Gain ($A_v$):**\n   $$i_d = g_m v_{gs} = -g_m v_{\\text{in}}$$\n   $$v_{\\text{out}} = -i_d R_D = g_m R_D v_{\\text{in}} \\implies \\mathbf{A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = g_m R_D}$$\n   *(Note that the gain of a Common-Gate stage is **positive / non-inverting**).*\n3. **Input Resistance ($R_{\\text{in}}$):**\n   $$\\mathbf{R_{\\text{in}}} = \\frac{v_{\\text{in}}}{-i_d} = \\mathbf{\\frac{1}{g_m}}$$\n4. **Output Resistance ($R_{\\text{out}}$):**\n   $$\\mathbf{R_{\\text{out}} = R_D}$$\n\n---\n\n#### **Case B: Including Body Effect ($g_{mb} \\neq 0$) and Channel-Length Modulation ($r_O \\neq \\infty$)**\nBecause the source terminal is not grounded, the bulk-source voltage varies with the input signal ($v_{bs} = -v_{\\text{in}}$), making the **body effect** active:\n\n1. **Voltage Gain ($A_v$):**\n   $$\\mathbf{A_v = \\frac{(g_m + g_{mb})r_O + 1}{r_O + R_D} R_D} \\approx (g_m + g_{mb}) R_D \\quad (\\text{for } r_O \\gg R_D)$$\n2. **Input Resistance ($R_{\\text{in}}$):**\n   $$\\mathbf{R_{\\text{in}} = \\frac{r_O + R_D}{1 + (g_m + g_{mb})r_O}} \\approx \\frac{1}{g_m + g_{mb}} \\quad (\\text{for } r_O \\gg R_D)$$\n3. **Output Resistance ($R_{\\text{out}}$):**\n   *(Setting $v_{\\text{in}} = 0$ grounds the source terminal, which turns off both $g_m$ and $g_{mb}$ current sources)*:\n   $$\\mathbf{R_{\\text{out}} = R_D \\parallel r_O}$$",
        "format": "markdown",
        "sha256": "57b3917dd1543799ab62454277133d0b7ea7ca0c169112eebbe35cac36a5f004"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input common-gate topology and derives the non-inverting gain and approximately 1/gm input resistance. The added body-effect and finite-ro results are consistent with the circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4152,
        "total_tokens": 5266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2414,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4152,
        "total_tokens": 5266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2414,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is an **NMOS Common-Gate (CG) stage** (with the gate tied directly to the supply rail $V_{DD}$). \n\nDepending on the context of your problem, this circuit can be analyzed in two ways: **Large-Signal Analysis** (finding how $V_{\\text{out}}$ varies as $V_{\\text{in}}$ sweeps from $0$ to $V_{DD}$) and **Small-Signal Analysis** (finding the amplifier gain and impedances when biased in saturation). Both analyses are provided below.\n\n---\n\n### 1. Large-Signal Analysis ($V_{\\text{out}}$ vs. $V_{\\text{in}}$)\n\nLet us trace the operation of the transistor $M_1$ as the input voltage $V_{\\text{in}}$ varies from **high ($V_{DD}$) to low ($0\\text{ V}$)**, and vice versa.\n\n#### **A. Cutoff Region ($V_{\\text{in}} > V_{DD} - V_{TH}$)**\n* The gate-to-source voltage is given by:\n  $$V_{GS} = V_{DD} - V_{\\text{in}}$$\n* For the NMOS transistor to turn on, $V_{GS}$ must exceed the threshold voltage $V_{TH}$. Therefore, as long as $V_{\\text{in}} > V_{DD} - V_{TH}$ (note that $V_{TH}$ includes body effect since the source is not at ground), the transistor $M_1$ is **OFF (in cutoff)**.\n* Since the drain current is $I_D = 0$, there is no voltage drop across $R_D$:\n  $$V_{\\text{out}} = V_{DD}$$\n\n---\n\n#### **B. Saturation Region ($V_{\\text{in,sat}} \\le V_{\\text{in}} \\le V_{DD} - V_{TH}$)**\n* As $V_{\\text{in}}$ drops below $V_{DD} - V_{TH}$, $M_1$ turns **ON**. \n* The condition for $M_1$ to be in saturation is $V_{DS} \\ge V_{GS} - V_{TH}$, which simplifies to:\n  $$V_{\\text{out}} \\ge V_{DD} - V_{TH}$$\n* Since $V_{\\text{out}}$ starts at $V_{DD}$, $M_1$ initially enters the **saturation region**. Neglecting channel-length modulation ($\\lambda = 0$), the drain current is:\n  $$I_D = \\frac{1}{2}\\mu_n C_{\\text{ox}}\\frac{W}{L}(V_{GS} - V_{TH})^2 = \\frac{1}{2}\\mu_n C_{\\text{ox}}\\frac{W}{L}(V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n* The output voltage decreases quadratically as $V_{\\text{in}}$ decreases:\n  $$V_{\\text{out}} = V_{DD} - I_D R_D = V_{DD} - \\frac{1}{2}\\mu_n C_{\\text{ox}}\\frac{W}{L}R_D (V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n\n---\n\n#### **C. Transition Point ($V_{\\text{in}} = V_{\\text{in,sat}}$)**\n* $M_1$ remains in saturation until $V_{\\text{out}}$ drops to $V_{DD} - V_{TH}$. At the edge of the triode region:\n  $$V_{\\text{out}} = V_{DD} - V_{TH} \\implies I_D R_D = V_{TH}$$\n* Substituting the saturation current equation:\n  $$\\frac{1}{2}\\mu_n C_{\\text{ox}}\\frac{W}{L}R_D (V_{DD} - V_{\\text{in,sat}} - V_{TH})^2 = V_{TH}$$\n* Solving for the boundary input voltage $V_{\\text{in,sat}}$:\n  $$V_{\\text{in,sat}} = V_{DD} - V_{TH} - \\sqrt{\\frac{2V_{TH}}{\\mu_n C_{\\text{ox}} (W/L) R_D}}$$\n\n---\n\n#### **D. Triode Region ($0 \\le V_{\\text{in}} < V_{\\text{in,sat}}$)**\n* If $V_{\\text{in}}$ drops below $V_{\\text{in,sat}}$ (assuming $R_D$ is large enough that $V_{\\text{in,sat}} > 0$), $V_{\\text{out}}$ falls below $V_{DD} - V_{TH}$ and $M_1$ enters the **triode (linear) region**.\n* The drain current is governed by the triode equation:\n  $$I_D = \\mu_n C_{\\text{ox}}\\frac{W}{L}\\left[(V_{DD} - V_{\\text{in}} - V_{TH})(V_{\\text{out}} - V_{\\text{in}}) - \\frac{1}{2}(V_{\\text{out}} - V_{\\text{in}})^2\\right]$$\n* Here, $V_{\\text{out}} = V_{DD} - I_D R_D$ continues to decrease more gradually as $V_{\\text{in}}$ approaches $0\\text{ V}$.\n* If $V_{\\text{in}}$ becomes very small and $R_D$ is very large, $M_1$ acts like a small resistor of value:\n  $$R_{\\text{on}} \\approx \\frac{1}{\\mu_n C_{\\text{ox}}\\frac{W}{L}(V_{DD} - V_{\\text{in}} - V_{TH})}$$\n\n---\n\n### 2. Small-Signal Analysis (Amplifier Characteristics)\n\nAssuming $V_{\\text{in}}$ is biased at a DC level such that $M_1$ operates in the **saturation region**, the circuit acts as a **Common-Gate Amplifier** (since the gate is at AC ground, $V_{DD}$).\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\n* **Neglecting channel-length modulation ($\\lambda = 0$):**\n  An increase in $V_{\\text{in}}$ reduces $V_{GS}$, which reduces $I_D$ and causes $V_{\\text{out}}$ to increase (non-inverting gain):\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = (g_m + g_{mb})R_D$$\n  *(If body effect is also neglected, $A_v = g_m R_D$).*\n\n* **Including channel-length modulation ($\\lambda \\neq 0$):**\n  $$A_v = \\frac{(g_m + g_{mb})r_o + 1}{r_o + R_D} R_D$$\n\n---\n\n#### **B. Input Impedance ($R_{\\text{in}}$)**\nLooking into the source terminal of $M_1$:\n* **If $\\lambda = 0$:**\n  $$R_{\\text{in}} = \\frac{1}{g_m + g_{mb}} \\quad \\left(\\text{or } \\frac{1}{g_m} \\text{ if } \\gamma = 0\\right)$$\n* **If $\\lambda \\neq 0$:**\n  $$R_{\\text{in}} = \\frac{r_o + R_D}{1 + (g_m + g_{mb})r_o}$$\n\n---\n\n#### **C. Output Impedance ($R_{\\text{out}}$)**\nLooking into the $V_{\\text{out}}$ node with the input voltage source shorted to AC ground ($v_{\\text{in}} = 0 \\implies v_{gs} = 0$ and $v_{bs} = 0$):\n* **If $\\lambda = 0$:**\n  $$R_{\\text{out}} = R_D$$\n* **If $\\lambda \\neq 0$:**\n  $$R_{\\text{out}} = R_D \\parallel r_o$$",
        "format": "markdown",
        "sha256": "e39509ad64706a73d6fb8adf1aa2573f87062ba5a9cf167806709d8c1d106b21"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven, AC-grounded-gate common-gate stage and gives the non-inverting gain and source input resistance, with valid body-effect and output-resistance refinements. The extra large-signal discussion does not change the essential result.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4488,
        "total_tokens": 5602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2690,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4488,
        "total_tokens": 5602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2690,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Common-Gate (CG) NMOS stage**, where the input signal ($V_{\\text{in}}$) is applied to the **source**, the output ($V_{\\text{out}}$) is taken from the **drain**, and the **gate** is tied directly to the positive supply voltage ($V_{DD}$).\n\nBelow is both the **large-signal (DC)** and **small-signal (AC)** analysis of the circuit.\n\n---\n\n### 1. Large-Signal Analysis ($V_{\\text{out}}$ vs. $V_{\\text{in}}$)\n\nTo understand how the circuit behaves across the full range of input voltages, let us vary $V_{\\text{in}}$ from $V_{DD}$ down to $0\\text{ V}$ (assuming $V_{TH} > 0$ and ignoring channel-length modulation and body effect for simplicity, though body effect increases $V_{TH}$ when $V_{\\text{in}} > 0$).\n\nKey terminal voltages:\n* $V_G = V_{DD}$\n* $V_S = V_{\\text{in}}$\n* $V_D = V_{\\text{out}} = V_{DD} - I_D R_D$\n* $V_{GS} = V_{DD} - V_{\\text{in}}$\n\n---\n\n#### **A. Cutoff Region ($V_{\\text{in}} \\ge V_{DD} - V_{TH}$)**\n* For the NMOS transistor $M_1$ to turn on, its gate-source voltage must exceed the threshold voltage ($V_{GS} > V_{TH}$).\n* When $V_{\\text{in}} \\ge V_{DD} - V_{TH}$, we have $V_{GS} \\le V_{TH}$, so **$M_1$ is OFF**.\n* Because no drain current flows ($I_D = 0$), there is no voltage drop across $R_D$:\n  $$V_{\\text{out}} = V_{DD}$$\n\n---\n\n#### **B. Saturation Region ($V_{\\text{in,tri}} \\le V_{\\text{in}} < V_{DD} - V_{TH}$)**\n* As $V_{\\text{in}}$ drops below $V_{DD} - V_{TH}$, $M_1$ turns on. \n* The condition for $M_1$ to operate in the **saturation region** is:\n  $$V_{DS} \\ge V_{GS} - V_{TH} \\implies V_{\\text{out}} - V_{\\text{in}} \\ge (V_{DD} - V_{\\text{in}}) - V_{TH}$$\n  $$V_{\\text{out}} \\ge V_{DD} - V_{TH}$$\n* Since $V_{\\text{out}}$ starts at $V_{DD}$, $M_1$ initially enters the **saturation region**. The drain current is given by:\n  $$I_D = \\frac{1}{2} \\mu_n C_{\\text{ox}} \\frac{W}{L} (V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n* Therefore, the output voltage drops quadratically as $V_{\\text{in}}$ decreases:\n  $$V_{\\text{out}} = V_{DD} - \\frac{1}{2} \\mu_n C_{\\text{ox}} \\frac{W}{L} R_D (V_{DD} - V_{\\text{in}} - V_{TH})^2$$\n\n---\n\n#### **C. Transition Point (Edge of Triode Region)**\n* $M_1$ leaves saturation and enters the **triode (linear) region** when $V_{\\text{out}}$ drops to $V_{DD} - V_{TH}$ (meaning the voltage drop across $R_D$ reaches $V_{TH}$):\n  $$I_D R_D = V_{TH} \\implies \\frac{1}{2} \\mu_n C_{\\text{ox}} \\frac{W}{L} R_D (V_{DD} - V_{\\text{in,tri}} - V_{TH})^2 = V_{TH}$$\n* Solving for the transition input voltage $V_{\\text{in,tri}}$:\n  $$V_{\\text{in,tri}} = V_{DD} - V_{TH} - \\sqrt{\\frac{2 V_{TH}}{\\mu_n C_{\\text{ox}} \\frac{W}{L} R_D}}$$\n\n---\n\n#### **D. Triode Region ($V_{\\text{in}} < V_{\\text{in,tri}}$)**\n* If $R_D$ and $\\frac{W}{L}$ are large enough such that $V_{\\text{in,tri}} > 0$, decreasing $V_{\\text{in}}$ below $V_{\\text{in,tri}}$ pushes $M_1$ into the **triode region**, where $V_{\\text{out}} < V_{DD} - V_{TH}$.\n* The drain current is governed by the triode equation:\n  $$I_D = \\frac{1}{2} \\mu_n C_{\\text{ox}} \\frac{W}{L} \\left[ 2(V_{DD} - V_{\\text{in}} - V_{TH})(V_{\\text{out}} - V_{\\text{in}}) - (V_{\\text{out}} - V_{\\text{in}})^2 \\right]$$\n* Here, $V_{\\text{out}}$ continues to decrease with $V_{\\text{in}}$ according to:\n  $$V_{\\text{out}} = V_{DD} - I_D R_D$$\n\n---\n\n### 2. Small-Signal (AC) Analysis\n\nAssuming $M_1$ is biased in the **saturation region**, the circuit operates as a **Common-Gate Amplifier** (since the gate is tied to $V_{DD}$, which is an AC ground).\n\n#### **A. Small-Signal Voltage Gain ($A_v$)**\n1. **Ignoring channel-length modulation ($\\lambda = 0$, $r_o \\to \\infty$):**\n   $$A_v = \\frac{\\partial V_{\\text{out}}}{\\partial V_{\\text{in}}} = (g_m + g_{mb}) R_D$$\n   *(If body effect is also neglected, $g_{mb} = 0$, simplifying to $A_v = g_m R_D$.)*\n   * **Note:** Unlike a Common-Source stage, the voltage gain of a Common-Gate stage is **positive (non-inverting)**. As $V_{\\text{in}}$ increases, $V_{GS}$ decreases, reducing $I_D$ and causing $V_{\\text{out}}$ to increase.\n\n2. **Including channel-length modulation ($r_o < \\infty$):**\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{1 + (g_m + g_{mb})r_o}{r_o + R_D} R_D$$\n\n---\n\n#### **B. Input Resistance ($R_{\\text{in}}$)**\nLooking into the source terminal of $M_1$:\n* **With $r_o \\to \\infty$:**\n  $$R_{\\text{in}} = \\frac{1}{g_m + g_{mb}} \\approx \\frac{1}{g_m}$$\n* **With finite $r_o$:**\n  $$R_{\\text{in}} = \\frac{R_D + r_o}{1 + (g_m + g_{mb})r_o}$$\n\n---\n\n#### **C. Output Resistance ($R_{\\text{out}}$)**\nLooking into the drain terminal (with the ideal input voltage source $V_{\\text{in}}$ shorted to AC ground):\n* Since $v_{gs} = 0$ and $v_{bs} = 0$, the dependent current sources of the transistor are inactive, leaving only $r_o$ in parallel with $R_D$:\n  $$R_{\\text{out}} = R_D \\parallel r_o$$\n  *(If $\\lambda = 0$, $R_{\\text{out}} = R_D$.)*\n\n---\n\n### Summary Table\n\n| Parameter | Expression (Ideal: $\\lambda = 0, \\gamma = 0$) | Expression (With Body Effect & $r_o$) |\n| :--- | :--- | :--- |\n| **Topology** | Common-Gate (CG) | Common-Gate (CG) |\n| **Voltage Gain ($A_v$)** | $+g_m R_D$ | $+\\dfrac{1 + (g_m + g_{mb})r_o}{r_o + R_D} R_D$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\dfrac{1}{g_m}$ | $\\dfrac{R_D + r_o}{1 + (g_m + g_{mb})r_o}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $R_D$ | $R_D \\parallel r_o$ |",
        "format": "markdown",
        "sha256": "1aa4b44161d663c34bfa01a4140a1d1226e0a303f2f5a9530172f5b2329430ff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input common-gate topology, gives the positive gain and low input resistance, and the finite-ro/body-effect expressions are consistent with the stated assumptions. The extra large-signal discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4278,
        "total_tokens": 5392,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2280,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4278,
        "total_tokens": 5392,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2280,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a classic \"trick\" problem (commonly found in textbooks like Behzad Razavi's *Fundamentals of Microelectronics*) designed to test your understanding of biasing and AC coupling. \n\nAt first glance, the circuit looks like a **Common-Gate (CG) amplifier**, where the input signal is capacitively coupled to the source of the MOSFET and the output is taken at the drain. However, there is a critical flaw in how the source terminal is connected.\n\nHere is the complete step-by-step analysis of the circuit as drawn, followed by how to fix it.\n\n---\n\n### 1. The \"Catch\" (Topological Flaw)\nLook closely at the source terminal of the NMOS transistor $M_1$. It is connected to the coupling capacitor $C_1$, **and it is also connected directly to ground via a solid wire.**\n\nBecause an ideal ground maintains a constant potential of $0\\text{ V}$ at all times, **the input signal $V_{\\text{in}}$ is completely shorted to ground** after passing through the capacitor $C_1$. \n\n---\n\n### 2. DC Analysis (Biasing)\nFor DC signals, the capacitor $C_1$ acts as an open circuit:\n\n* **Source Voltage ($V_S$):** $0\\text{ V}$ (connected directly to ground).\n* **Gate Voltage ($V_G$):** $V_b$\n* **Gate-to-Source Voltage ($V_{GS}$):** $V_{GS} = V_G - V_S = V_b - 0 = V_b$\n\nAssuming $V_b > V_{TH}$ (where $V_{TH}$ is the threshold voltage) and the transistor operates in the saturation region, a constant DC drain current $I_D$ flows:\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_b - V_{TH})^2$$\n\nThe DC output voltage at the drain is simply:\n$$V_{\\text{out(DC)}} = V_{DD} - I_D R_D$$\n\n*(Note: For $M_1$ to remain in saturation, we must have $V_{\\text{out(DC)}} \\ge V_b - V_{TH}$.)*\n\n---\n\n### 3. Small-Signal (AC) Analysis\nWhen we apply a time-varying AC signal $v_{\\text{in}}$:\n\n1. **Source Node ($v_s$):** Because the source terminal is tied directly to ground, its potential cannot change. Therefore, the small-signal voltage at the source is strictly zero:\n   $$v_s = 0\\text{ V}$$\n\n2. **Gate Node ($v_g$):** The gate is tied to a constant DC voltage $V_b$, which acts as an AC ground:\n   $$v_g = 0\\text{ V}$$\n\n3. **Gate-to-Source Voltage ($v_{gs}$):** \n   $$v_{gs} = v_g - v_s = 0 - 0 = 0\\text{ V}$$\n\n4. **Output Voltage ($v_{\\text{out}}$) and Gain ($A_v$):**\n   Since $v_{gs} = 0$, the transistor generates no small-signal drain current ($i_d = g_m v_{gs} = 0$). Consequently, there is no AC voltage variation at the output node:\n   $$v_{\\text{out}} = 0\\text{ V}$$\n   $$\\text{Voltage Gain } (A_v) = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0$$\n\n5. **Input and Output Impedance:**\n   * **Input Impedance ($Z_{\\text{in}}$):** The input source $V_{\\text{in}}$ simply sees the capacitor $C_1$ connected directly to ground. Thus, $Z_{\\text{in}} = \\frac{1}{sC_1}$.\n   * **Output Impedance ($R_{\\text{out}}$):** Looking into the output terminal with $v_{gs} = 0$, we only see the drain resistor in parallel with the transistor's intrinsic output resistance: $R_{\\text{out}} = R_D \\parallel r_o$.\n\n---\n\n### 4. How to Fix the Circuit\nTo make this a functional **Common-Gate amplifier**, you need to provide a DC path to ground for the bias current $I_D$ **without** shorting the AC signal to ground. \n\nYou can fix this by inserting a **resistor ($R_S$)** or a **constant current source ($I_{\\text{bias}}$)** between the source terminal of $M_1$ and ground:\n\n* **With a source resistor $R_S$ added:** \n  The AC signal can now wiggle the source node. Assuming $C_1$ is very large (acting as a short circuit at the operating frequency) and neglecting channel-length modulation ($r_o \\to \\infty$), the small-signal voltage gain becomes:\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = g_m R_D$$",
        "format": "markdown",
        "sha256": "8188a535dc4b8b92cae5fd2ba76d078fe90d6e46f26784d7a10ce1c5b483d2d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-to-ground short and concludes that the source signal is zero, so the ideal small-signal gain from Vin is zero. The extra biasing and repair discussion does not undermine the essential answer.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 2657,
        "total_tokens": 3778,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1534,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 2657,
        "total_tokens": 3778,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1534,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a classic \"trick\" problem (from Behzad Razavi’s *Fundamentals of Microelectronics*) designed to illustrate a common mistake when biasing a **Common-Gate (CG) amplifier**.\n\nHere is the complete DC and AC (small-signal) analysis of the circuit:\n\n---\n\n### 1. Summary (The Main Flaw)\nWhile the circuit appears to be a capacitively coupled Common-Gate amplifier, **the small-signal voltage gain is zero ($A_v = 0$)**. \n\nBecause the source terminal of $M_1$ is connected **directly to ground**, the input AC signal is shorted straight to ground and cannot change the source voltage of the transistor.\n\n---\n\n### 2. DC Analysis (Biasing)\nFor DC analysis, the coupling capacitor $C_1$ acts as an **open circuit**, isolating the input source $V_{\\text{in}}$ from the transistor.\n\n* **Source Voltage ($V_S$):** Tied directly to ground, so $V_S = 0\\text{ V}$.\n* **Gate Voltage ($V_G$):** Tied to the bias voltage, so $V_G = V_b$.\n* **Gate-to-Source Voltage ($V_{GS}$):** \n  $$V_{GS} = V_G - V_S = V_b$$\n\nAssuming $V_b > V_{TH}$ (where $V_{TH}$ is the threshold voltage) and the transistor is in saturation ($V_{\\text{out}} \\ge V_b - V_{TH}$), the DC drain current is:\n$$I_D = \\frac{1}{2}\\mu_n C_{\\text{ox}} \\frac{W}{L} (V_b - V_{TH})^2$$\n\nThe DC output voltage is simply:\n$$V_{\\text{out(DC)}} = V_{DD} - I_D R_D$$\n\n*(Note: From a purely DC perspective, the transistor is properly biased.)*\n\n---\n\n### 3. AC (Small-Signal) Analysis\nIn small-signal analysis, independent DC voltage sources ($V_{DD}$ and $V_b$) are replaced by AC ground, and the coupling capacitor $C_1$ is typically treated as a short circuit at the operating frequency.\n\n* **At the Source Node:** The input signal $V_{\\text{in}}$ attempts to drive the source terminal through $C_1$. However, the source terminal is **hard-wired directly to ground**. \n* Because ground is an ideal fixed potential ($0\\text{ V}$), the small-signal source voltage is forced to stay at zero:\n  $$v_s = 0$$\n* **At the Gate Node:** Since $V_b$ is a constant DC voltage, the small-signal gate voltage is also zero:\n  $$v_g = 0$$\n* **Small-Signal Drain Current ($i_d$):** \n  $$v_{gs} = v_g - v_s = 0 - 0 = 0$$\n  $$i_d = g_m v_{gs} = 0$$\n\n* **Small-Signal Output Voltage ($v_{\\text{out}}$) and Gain ($A_v$):**\n  Since there is no change in the drain current, there is no change in the voltage drop across $R_D$:\n  $$v_{\\text{out}} = -i_d R_D = 0$$\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0$$\n\nAll the AC current generated by $V_{\\text{in}}$ through $C_1$ simply flows directly into the ground symbol at the source node rather than entering the transistor.\n\n---\n\n### 4. How to Fix the Circuit\nTo allow the source voltage to fluctuate with the AC input signal while still maintaining a DC path to ground for the bias current $I_D$, you must place an impedance between the source terminal and ground:\n\n1. **Add a Source Resistor ($R_S$):** Place a resistor $R_S$ between the source node and ground. \n2. **Or Add a Current Source ($I_{\\text{bias}}$):** Replace the direct ground connection with an ideal DC current source connected to ground.\n\nWith a resistor $R_S$ in place (assuming $C_1 \\to \\infty$ and neglecting channel-length modulation $\\lambda = 0$), the source node is no longer shorted to AC ground, and the circuit achieves the standard Common-Gate voltage gain:\n$$A_v = g_m R_D$$",
        "format": "markdown",
        "sha256": "0b14b5e1d51a1c44d65413233b87a713f525a20b3adfd6e7751e5e8bdf5ee776"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input cannot create a small-signal source voltage and the ideal gain is zero, satisfying the full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 2382,
        "total_tokens": 3503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1386,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 2382,
        "total_tokens": 3503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1386,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a classic \"trick\" problem from microelectronics textbooks (specifically from Behzad Razavi’s *Fundamentals of Microelectronics*) designed to illustrate the relationship between DC biasing and AC signal coupling. \n\nAt first glance, it looks like a **Common-Gate (CG) amplifier**, because the input signal ($V_{\\text{in}}$) is coupled to the source, the gate is tied to a constant bias voltage ($V_b$), and the output ($V_{\\text{out}}$) is taken at the drain. However, there is a critical flaw in the schematic.\n\n---\n\n### 1. The Critical Observation\nLook closely at the **source terminal** of transistor $M_1$: it is **directly connected to ground**. \n\nBecause ground is a fixed reference potential ($0\\text{ V}$), the voltage at the source terminal can never change. Any AC current coming from $V_{\\text{in}}$ through the coupling capacitor $C_1$ is shunted directly into the ground node rather than modulating the source voltage of the transistor.\n\n---\n\n### 2. DC (Bias) Analysis\nFor DC signals, the capacitor $C_1$ acts as an open circuit, isolating $V_{\\text{in}}$ from the rest of the circuit.\n* **Gate Voltage ($V_G$):** $V_b$\n* **Source Voltage ($V_S$):** $0\\text{ V}$\n* **Gate-to-Source Voltage ($V_{GS}$):** $V_{GS} = V_G - V_S = V_b$\n\nAssuming $V_b > V_{TH}$ (where $V_{TH}$ is the threshold voltage) and that $M_1$ operates in the **saturation region** ($V_{\\text{out}} \\ge V_b - V_{TH}$), the DC drain current is constant:\n$$I_D = \\frac{1}{2}\\mu_n C_{\\text{ox}} \\frac{W}{L} (V_b - V_{TH})^2$$\n\nThe DC quiescent output voltage is therefore a constant value:\n$$V_{\\text{out(DC)}} = V_{DD} - I_D R_D$$\n\n*(Note: If $R_D$ is too large such that $V_{\\text{out(DC)}} < V_b - V_{TH}$, the transistor will operate in the triode region, which still results in a constant DC current and constant $V_{\\text{out}}$).*\n\n---\n\n### 3. AC (Small-Signal) Analysis\nTo find how the circuit responds to the time-varying input signal $v_{\\text{in}}$, we set DC voltage sources ($V_{DD}$ and $V_b$) to AC ground:\n\n1. **Small-Signal Gate Voltage ($v_g$):** $0\\text{ V}$ (since $V_b$ is constant).\n2. **Small-Signal Source Voltage ($v_s$):** $0\\text{ V}$ (since the source is hard-wired to ground).\n3. **Small-Signal $v_{gs}$:** \n   $$v_{gs} = v_g - v_s = 0 - 0 = 0\\text{ V}$$\n\nBecause $v_{gs} = 0\\text{ V}$ at all times, the input signal has **zero effect** on the transistor's drain current ($i_d = g_m v_{gs} = 0$).\n\n* **Small-Signal Output Voltage ($v_{\\text{out}}$):** $0\\text{ V}$\n* **Voltage Gain ($A_v$):** \n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0$$\n* **Input Impedance ($Z_{\\text{in}}$):** The input source $V_{\\text{in}}$ only sees the capacitor $C_1$ connected straight to ground:\n  $$Z_{\\text{in}} = \\frac{1}{j\\omega C_1}$$\n* **Output Impedance ($Z_{\\text{out}}$):** Looking into the $V_{\\text{out}}$ terminal with $v_{gs} = 0$:\n  $$Z_{\\text{out}} = R_D \\parallel r_o$$\n\n---\n\n### 4. How to Fix the Circuit\nTo turn this into a functional **Common-Gate amplifier**, the source terminal must maintain a DC path to ground for biasing while remaining free to move (wiggle) with the AC input signal. \n\nThis is achieved by inserting a **source resistor ($R_S$)** or a **DC current source ($I_{\\text{bias}}$)** between the source node and ground:\n\n* **With a resistor $R_S$ placed between the source and ground:** \n  The AC signal can now modulate the source voltage, yielding a non-inverting small-signal voltage gain (assuming $C_1$ is a short circuit at the operating frequency and ignoring channel-length modulation):\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx g_m R_D$$",
        "format": "markdown",
        "sha256": "06bb9d0bd4a8faf7b30e1372d6ac338cb3741201653eb4ece1a2079de0b3fe58"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input cannot modulate the transistor and the ideal voltage gain is zero. Extra bias and repair discussion does not undermine the essential answer.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 2638,
        "total_tokens": 3759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1533,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 2638,
        "total_tokens": 3759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1533,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**. \n\nAlthough there are four capacitors shown in the schematic, the number of poles is determined by the number of **independent** energy-storage elements (state variables) in the small-signal equivalent circuit. Here is the step-by-step breakdown:\n\n### 1. $C_{\\text{SB}}$ is shorted out\nThe source terminal of transistor $M_1$ is directly connected to ground. Because $C_{\\text{SB}}$ is connected between the source and ground, both of its terminals are tied to ground. Therefore, $C_{\\text{SB}}$ carries no voltage or current and does not contribute a pole.\n\n### 2. The remaining three capacitors form a loop\nThis leaves three active capacitors: $C_{\\text{GS}}$, $C_{\\text{GD}}$, and $C_{\\text{DB}}$. However, they do not produce three independent poles because they form a **capacitive loop** with the ground node:\n$$V_{C_{\\text{GS}}} - V_{C_{\\text{GD}}} - V_{C_{\\text{DB}}} = 0$$\n\nBecause of Kirchhoff's Voltage Law (KVL), if you know the voltages across any two of these capacitors, the voltage across the third is automatically fixed. Thus, there are only **2 independent state variables**.\n\n---\n\n### Alternative View: Counting Independent Nodes\nAnother intuitive way to find the number of poles in a circuit without inductors is to count the number of independent capacitive nodes (excluding ground and ideal voltage sources):\n\n1. **The Gate Node ($V_G$):** Associated with $R_S$, $C_{\\text{GS}}$, and $C_{\\text{GD}}$.\n2. **The Drain/Output Node ($V_{\\text{out}}$):** Associated with $R_D$, $C_{\\text{DB}}$, and $C_{\\text{GD}}$.\n\nWriting Kirchhoff's Current Law (KCL) at these two nodes in the $s$-domain yields a system of two equations:\n* **Gate Node:** $$\\frac{V_G - V_{\\text{in}}}{R_S} + V_G s C_{\\text{GS}} + (V_G - V_{\\text{out}}) s C_{\\text{GD}} = 0$$\n* **Drain Node:** $$\\frac{V_{\\text{out}}}{R_D} + g_m V_G + V_{\\text{out}} s C_{\\text{DB}} + (V_{\\text{out}} - V_G) s C_{\\text{GD}} = 0$$\n\nSolving this two-node system yields a transfer function $\\frac{V_{\\text{out}}}{V_{\\text{in}}}(s)$ with a second-order denominator ($a s^2 + b s + 1$), confirming that the circuit has **2 poles** (and 1 right-half-plane zero caused by the feedforward path through $C_{\\text{GD}}$).",
        "format": "markdown",
        "sha256": "c797f154bbe6eac2ada9bd6b3785ff6f6c56fcc720f4b0b5a6cf6e06698bb9c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count by noting that CSB is grounded at both terminals and the remaining capacitors have only two independent voltages.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 1835,
        "total_tokens": 2960,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1210,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 1835,
        "total_tokens": 2960,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1210,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nAlthough there are four capacitors shown in the schematic, the number of poles is determined by the number of *independent* energy storage elements (or independent capacitive nodes):\n\n1. **$C_{\\text{SB}}$ is shorted out:** Both terminals of the source-bulk capacitance $C_{\\text{SB}}$ are connected directly to ground. Because there is never any voltage across it, it plays no role in the circuit's frequency response.\n\n2. **Capacitive loop between $C_{\\text{GS}}$, $C_{\\text{GD}}$, and $C_{\\text{DB}}$:** The remaining three capacitors form a closed loop connecting the gate, the drain ($V_{\\text{out}}$), and ground. By Kirchhoff's Voltage Law (KVL), the voltages across these three capacitors are not independent:\n   $$V_{\\text{GS}} - V_{\\text{GD}} - V_{\\text{DB}} = 0$$\n   Because fixing the voltage on any two of these capacitors automatically determines the voltage across the third, a capacitive loop reduces the order of the system by one ($3 - 1 = 2$).\n\n3. **Node analysis confirmation:** Looking at the small-signal circuit, there are only **two independent nodes** connected to capacitors: \n   * The **Gate** node\n   * The **Drain** ($V_{\\text{out}}$) node\n\nWriting Kirchhoff's Current Law (KCL) at these two nodes yields a system of equations whose transfer function $\\frac{V_{\\text{out}}}{V_{\\text{in}}}(s)$ has a second-order denominator ($as^2 + bs + 1$), resulting in exactly **2 poles** (along with 1 right-half-plane zero created by the feedforward path through $C_{\\text{GD}}$).",
        "format": "markdown",
        "sha256": "c5c071fc4851245e681e94d552c00a5914cc00883b44c73b798d68e96c1e413a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives two poles and justifies the count by noting that CSB is grounded at both terminals and the remaining three capacitors have only two independent voltages.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 1433,
        "total_tokens": 2558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 1433,
        "total_tokens": 2558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure has **2 poles**. \n\nAlthough there are four capacitors drawn in the schematic, we can determine the true number of poles using two simple steps:\n\n---\n\n### 1. Eliminate Shorted Capacitors\nLook closely at the source-bulk capacitor, **$C_{\\text{SB}}$**:\n* The source of transistor $M_1$ is connected directly to ground, and the other terminal of $C_{\\text{SB}}$ is also connected to ground. \n* Because both of its terminals are tied to ground, **$C_{\\text{SB}}$ is completely shorted out** (it carries zero voltage and zero current) and does not contribute a pole.\n\nThis leaves three active capacitors in the circuit: $C_{\\text{GS}}$, $C_{\\text{GD}}$, and $C_{\\text{DB}}$.\n\n---\n\n### 2. Identify Capacitive Loops (or Independent Nodes)\nEven with three active capacitors remaining, the circuit does not have three poles. You can see why using either of the following standard methods:\n\n#### **Method A: The Capacitive Loop Rule**\nThe number of poles in a circuit is equal to the number of active capacitors **minus** the number of loops made entirely of capacitors (including ground/ideal voltage sources):\n$$\\text{Number of Poles} = N_{\\text{capacitors}} - N_{\\text{capacitive loops}}$$\n\n* $C_{\\text{GS}}$ connects the **Gate** to **Ground**.\n* $C_{\\text{GD}}$ connects the **Gate** to the **Drain**.\n* $C_{\\text{DB}}$ connects the **Drain** back to **Ground**.\n\nTogether, $C_{\\text{GS}}$, $C_{\\text{GD}}$, and $C_{\\text{DB}}$ form a closed **capacitor-only loop**. By Kirchhoff's Voltage Law (KVL), the voltage across one capacitor is always fixed by the voltages across the other two ($V_{\\text{GS}} = V_{\\text{GD}} + V_{\\text{DB}}$). Because only two of the capacitor voltages are independent state variables:\n$$\\text{Number of Poles} = 3 - 1 = \\mathbf{2}$$\n\n#### **Method B: Counting Independent Small-Signal Nodes**\nIn the small-signal equivalent circuit, there are only **two** independent nodes whose voltages can vary:\n1. The **Gate** node ($V_G$)\n2. The **Drain** node ($V_{\\text{out}}$)\n\nWriting Kirchhoff's Current Law (KCL) at these two nodes in the $s$-domain yields two linear equations:\n1. **At the Gate:** $\\frac{V_G - V_{\\text{in}}}{R_S} + V_G s C_{\\text{GS}} + (V_G - V_{\\text{out}})s C_{\\text{GD}} = 0$\n2. **At the Drain:** $\\frac{V_{\\text{out}}}{R_D} + g_m V_G + V_{\\text{out}} s C_{\\text{DB}} + (V_{\\text{out}} - V_G)s C_{\\text{GD}} = 0$\n\nWhen you solve these two equations for the transfer function $\\frac{V_{\\text{out}}}{V_{\\text{in}}}(s)$, the highest power of $s$ in the denominator is $s^2$ (coming from the cross-multiplication of the $s$-terms in the two equations). A second-order denominator ($a s^2 + b s + 1 = 0$) produces exactly **2 poles**.",
        "format": "markdown",
        "sha256": "d2c6b3b1ee2564f90cc1e7cb80cab4ac78129b950aea456fd8a30679a393cca1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count by noting that CSB is shorted out and the remaining three capacitors form a loop with only two independent capacitor voltages. The second-order transfer-function argument is also consistent.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 1937,
        "total_tokens": 3062,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1170,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 1937,
        "total_tokens": 3062,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1170,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete analysis of the circuit shown in the figure, covering its topology, qualitative operation, exact small-signal derivations, and feedback theory interpretation.\n\n---\n\n### 1. Circuit Overview and Topology\n* **Forward Amplifier:** The input signal $V_{\\text{in}}$ is applied to the **source** of the NMOS transistor $M_1$, and the output signal $V_{\\text{out}}$ is taken at the **drain**. This forms a **Common-Gate (CG)** amplifier stage, which is non-inverting.\n* **Feedback Network:** Resistors $R_1$ and $R_2$ form a voltage divider that senses the output voltage $V_{\\text{out}}$ and feeds a fraction of it ($V_F$) back to the **gate** of $M_1$.\n* **Feedback Topology:** **Voltage-Voltage (Shunt-Series)** negative feedback:\n  * **Output (Shunt/Voltage sampling):** The voltage divider $R_1\\text{--}R_2$ is connected in parallel (shunt) with the output node to sense $V_{\\text{out}}$, which reduces the output impedance.\n  * **Input (Series/Voltage mixing):** The transistor responds to the differential gate-to-source voltage $V_{GS} = V_F - V_{\\text{in}}$. Because $V_F$ subtracts directly from $V_{\\text{in}}$, the feedback is mixed in series at the input, which increases the input impedance.\n\n---\n\n### 2. Qualitative Operation (Proof of Negative Feedback)\nTo verify that the feedback is negative, suppose $V_{\\text{in}}$ increases ($\\uparrow$):\n1. Initially, since $V_{\\text{in}}$ is at the source, $V_{GS} = V_F - V_{\\text{in}}$ decreases ($\\downarrow$).\n2. A decrease in $V_{GS}$ causes the drain current $I_D$ to decrease ($\\downarrow$).\n3. Less current through $R_D$ causes the output voltage $V_{\\text{out}} = V_{DD} - I_D R_D$ to increase ($\\uparrow$).\n4. Through the resistive divider, the feedback voltage $V_F = \\frac{R_2}{R_1 + R_2} V_{\\text{out}}$ also increases ($\\uparrow$).\n5. Because $V_F$ is connected to the gate, an increase in $V_F$ acts to **increase** $V_{GS}$, opposing the initial decrease in $V_{GS}$. \n\nThus, the circuit operates with **negative feedback**, mimicking a non-inverting op-amp configuration where the source and gate act as the non-inverting and inverting inputs, respectively.\n\n---\n\n### 3. Small-Signal Analysis (Neglecting $r_o$ and $g_{mb}$)\n\nLet $\\beta$ denote the feedback voltage divider ratio, and $R_L$ denote the total effective load resistance at the drain node:\n$$\\beta = \\frac{R_2}{R_1 + R_2}$$\n$$R_L = R_D \\parallel (R_1 + R_2) = \\frac{R_D(R_1 + R_2)}{R_D + R_1 + R_2}$$\n\n#### A. Closed-Loop Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)\nSince zero current flows into the gate of $M_1$:\n$$v_F = \\frac{R_2}{R_1 + R_2} v_{\\text{out}} = \\beta v_{\\text{out}}$$\n\nThe small-signal gate-to-source voltage is:\n$$v_{gs} = v_F - v_{\\text{in}} = \\beta v_{\\text{out}} - v_{\\text{in}}$$\n\nThe small-signal drain current is $i_d = g_m v_{gs}$. Applying KCL at the output node:\n$$v_{\\text{out}} = -i_d R_L = -g_m (\\beta v_{\\text{out}} - v_{\\text{in}}) R_L$$\n\nRearranging terms to solve for $\\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$v_{\\text{out}} (1 + \\beta g_m R_L) = g_m R_L v_{\\text{in}}$$\n\n$$\\mathbf{A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m [R_D \\parallel (R_1 + R_2)]}{1 + g_m \\frac{R_2}{R_1 + R_2} [R_D \\parallel (R_1 + R_2)]}}$$\n\n* **High Loop-Gain Approximation:** If the loop gain $\\beta g_m R_L \\gg 1$, the voltage gain simplifies to:\n  $$A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}$$\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nThe small-signal current $i_{\\text{in}}$ flowing into the source terminal from $v_{\\text{in}}$ is equal to $-i_d$:\n$$i_{\\text{in}} = -i_d = -g_m v_{gs} = g_m (v_{\\text{in}} - \\beta v_{\\text{out}})$$\n\nSubstituting $v_{\\text{out}} = A_v v_{\\text{in}} = \\left(\\frac{g_m R_L}{1 + \\beta g_m R_L}\\right) v_{\\text{in}}$:\n$$i_{\\text{in}} = g_m v_{\\text{in}} \\left( 1 - \\frac{\\beta g_m R_L}{1 + \\beta g_m R_L} \\right) = \\left(\\frac{g_m}{1 + \\beta g_m R_L}\\right) v_{\\text{in}}$$\n\nTherefore, the input resistance is:\n$$\\mathbf{R_{\\text{in}} = \\frac{v_{\\text{in}}}{i_{\\text{in}}} = \\frac{1}{g_m} (1 + \\beta g_m R_L) = \\frac{1}{g_m} + \\frac{R_2}{R_1 + R_2}\\left[R_D \\parallel (R_1 + R_2)\\right]}$$\n\n*(Note: Negative feedback increases the open-loop input impedance $\\frac{1}{g_m}$ by the factor $1 + \\beta A_0$.)*\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nTo find $R_{\\text{out}}$, ground the independent input source ($v_{\\text{in}} = 0$) and apply a test voltage $v_x$ at the output node while measuring the test current $i_x$:\n* With $v_{\\text{in}} = 0$, the gate-to-source voltage is $v_{gs} = v_F - 0 = \\beta v_x$.\n* Applying KCL at the output node:\n  $$i_x = \\frac{v_x}{R_D} + \\frac{v_x}{R_1 + R_2} + i_d = \\frac{v_x}{R_L} + g_m \\beta v_x$$\n\nSolving for $R_{\\text{out}} = \\frac{v_x}{i_x}$:\n$$\\mathbf{R_{\\text{out}} = \\frac{1}{\\frac{1}{R_D} + \\frac{1}{R_1 + R_2} + \\beta g_m} = \\frac{R_D \\parallel (R_1 + R_2)}{1 + g_m \\frac{R_2}{R_1 + R_2} [R_D \\parallel (R_1 + R_2)]}}$$\n\n*(Note: Negative feedback reduces the open-loop output impedance $R_L$ by the factor $1 + \\beta A_0$.)*\n\n---\n\n### 4. Summary from a Feedback Theory Perspective\n\n| Parameter | Expression |\n| :--- | :--- |\n| **Open-Loop Gain (with loading), $A_0$** | $g_m \\left[R_D \\parallel (R_1 + R_2)\\right]$ |\n| **Feedback Factor, $\\beta$** | $\\dfrac{R_2}{R_1 + R_2}$ |\n| **Loop Gain, $T = \\beta A_0$** | $g_m \\dfrac{R_2}{R_1 + R_2} \\left[R_D \\parallel (R_1 + R_2)\\right]$ |\n| **Closed-Loop Gain, $A_v$** | $\\dfrac{A_0}{1 + \\beta A_0}$ |\n| **Closed-Loop Input Resistance, $R_{\\text{in}}$** | $R_{\\text{in,open}} (1 + \\beta A_0) = \\dfrac{1}{g_m}(1 + \\beta A_0)$ |\n| **Closed-Loop Output Resistance, $R_{\\text{out}}$** | $\\dfrac{R_{\\text{out,open}}}{1 + \\beta A_0} = \\dfrac{R_D \\parallel (R_1 + R_2)}{1 + \\beta A_0}$ |\n\n---\n\n### 5. Effects of Transistor Non-Idealities ($g_{mb}$ and $r_o$)\n\n1. **Body Effect ($g_{mb} \\neq 0$):**\n   Because the source is not grounded, $v_{bs} = -v_{\\text{in}}$. The drain current becomes $i_d = g_m(\\beta v_{\\text{out}} - v_{\\text{in}}) - g_{mb}v_{\\text{in}}$. \n   * This assists the forward path (increasing $A_0$ from $g_m R_L$ to $(g_m + g_{mb})R_L$), while the loop gain $T$ remains $\\beta g_m R_L$ (since the signal in the feedback loop enters the gate, not the source):\n     $$A_v = \\frac{(g_m + g_{mb}) [R_D \\parallel (R_1 + R_2)]}{1 + g_m \\frac{R_2}{R_1 + R_2} [R_D \\parallel (R_1 + R_2)]}$$\n\n2. **Channel-Length Modulation ($r_o < \\infty$):**\n   Including $r_o$ between the drain and source adds a direct path between $v_{\\text{in}}$ and $v_{\\text{out}}$:\n   $$A_v = \\frac{\\left(g_m + g_{mb} + \\frac{1}{r_o}\\right) [R_D \\parallel (R_1 + R_2)]}{1 + \\left(\\beta g_m + \\frac{1}{r_o}\\right) [R_D \\parallel (R_1 + R_2)]}$$\n   $$R_{\\text{out}} = R_D \\parallel (R_1 + R_2) \\parallel r_o \\parallel \\left(\\frac{1}{\\beta g_m}\\right)$$",
        "format": "markdown",
        "sha256": "d1f486624601824df00128e8dbc6f2a9ce07321e17f777c9a0a550c9b6658573"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, divider feedback to the gate, and negative feedback, and gives the correct closed-loop gain. The golden solution makes these sufficient for full credit; secondary refinements do not change that.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 6758,
        "total_tokens": 7879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 6758,
        "total_tokens": 7879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete analysis of the circuit, covering its qualitative operation, feedback topology, and exact small-signal parameters (voltage gain, input impedance, and output impedance).\n\n---\n\n### 1. Circuit Overview & Qualitative Analysis\n\n* **Core Amplifier:** The input signal $V_{\\text{in}}$ is applied to the source of the NMOS transistor $M_1$, and the output signal $V_{\\text{out}}$ is taken from the drain. Thus, the forward signal path operates as a **Common-Gate (CG) amplifier**.\n* **Feedback Network:** Resistors $R_1$ and $R_2$ form a resistive voltage divider that senses the output voltage $V_{\\text{out}}$ and feeds a fraction of it ($V_F$) back to the gate of $M_1$:\n  $$V_F = \\left(\\frac{R_2}{R_1 + R_2}\\right) V_{\\text{out}} = \\beta V_{\\text{out}}$$\n  where $\\beta = \\frac{R_2}{R_1 + R_2}$ is the **feedback factor**.\n\n#### Polarity of Feedback (Negative vs. Positive)\nTo determine the polarity of the feedback loop, follow a small perturbation around the loop (keeping $V_{\\text{in}}$ constant):\n1. Suppose $V_{\\text{out}}$ increases ($\\Delta V_{\\text{out}} > 0$).\n2. The feedback voltage at the gate increases: $\\Delta V_F = \\beta \\Delta V_{\\text{out}} > 0$.\n3. Because the gate voltage rises while the source voltage ($V_{\\text{in}}$) is fixed, the gate-to-source voltage $V_{GS}$ increases ($\\Delta V_{GS} > 0$).\n4. This increases the drain current $I_D$ of $M_1$, which increases the voltage drop across $R_D$ and forces $V_{\\text{out}} = V_{DD} - I_D R_D$ to **decrease**.\n\nBecause the returning signal opposes the initial perturbation, the circuit employs **negative feedback**.\n\n---\n\n### 2. Feedback Parameters (Assuming $\\lambda = 0, \\gamma = 0$)\n\n* **Loading of the Feedback Network:** Looking into the feedback divider from the output node, the resistance is $R_1 + R_2$ in parallel with $R_D$. Let us define the total effective load resistance $R_L$ as:\n  $$R_L = R_D \\parallel (R_1 + R_2) = \\frac{R_D(R_1 + R_2)}{R_D + R_1 + R_2}$$\n* **Open-Loop Voltage Gain ($A_0$):** With the feedback connection broken at the gate (gate grounded for small signals), the circuit is a standard common-gate stage with gain:\n  $$A_0 = g_m R_L = g_m \\left[ R_D \\parallel (R_1 + R_2) \\right]$$\n* **Feedback Factor ($\\beta$):**\n  $$\\beta = \\frac{R_2}{R_1 + R_2}$$\n* **Loop Gain ($T$):**\n  $$T = \\beta A_0 = \\left(\\frac{R_2}{R_1 + R_2}\\right) g_m \\left[ R_D \\parallel (R_1 + R_2) \\right]$$\n\n---\n\n### 3. Small-Signal Analysis (Neglecting Channel-Length Modulation, $r_o \\to \\infty$)\n\nUsing the small-signal model where $v_g = v_F = \\beta v_{\\text{out}}$ and $v_s = v_{\\text{in}}$, the small-signal gate-to-source voltage is:\n$$v_{gs} = v_g - v_s = \\beta v_{\\text{out}} - v_{\\text{in}}$$\n\nThe small-signal drain current is:\n$$i_d = g_m v_{gs} = g_m (\\beta v_{\\text{out}} - v_{\\text{in}})$$\n\n#### A. Closed-Loop Voltage Gain ($A_v$)\nApplying Kirchhoff's Current Law (KCL) at the output node:\n$$\\frac{v_{\\text{out}}}{R_D} + \\frac{v_{\\text{out}}}{R_1 + R_2} + i_d = 0$$\n\nUsing $R_L = R_D \\parallel (R_1 + R_2)$ and substituting $i_d$:\n$$\\frac{v_{\\text{out}}}{R_L} + g_m(\\beta v_{\\text{out}} - v_{\\text{in}}) = 0$$\n\n$$v_{\\text{out}} \\left( \\frac{1}{R_L} + \\beta g_m \\right) = g_m v_{\\text{in}}$$\n\nSolving for $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{g_m R_L}{1 + \\beta g_m R_L} = \\frac{g_m \\left[ R_D \\parallel (R_1 + R_2) \\right]}{1 + \\left(\\frac{R_2}{R_1 + R_2}\\right) g_m \\left[ R_D \\parallel (R_1 + R_2) \\right]}$$\n\n*(Notice this matches the classic feedback formula $A_v = \\frac{A_0}{1 + \\beta A_0}$.)*\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLet a test voltage source $v_{\\text{in}}$ supply an input current $i_{\\text{in}}$ into the source of $M_1$. Since $r_o \\to \\infty$, all current entering the source exits the drain, meaning $i_{\\text{in}} = -i_d$. \n\nFrom KCL at the output node, $-i_d = \\frac{v_{\\text{out}}}{R_L}$, so:\n$$i_{\\text{in}} = \\frac{v_{\\text{out}}}{R_L}$$\n\nDividing $v_{\\text{in}}$ by $i_{\\text{in}}$ gives the input resistance:\n$$R_{\\text{in}} = \\frac{v_{\\text{in}}}{i_{\\text{in}}} = \\frac{R_L}{v_{\\text{out}} / v_{\\text{in}}} = \\frac{R_L}{A_v}$$\n\nSubstituting $A_v$:\n$$R_{\\text{in}} = \\frac{1 + \\beta g_m R_L}{g_m} = \\frac{1}{g_m} (1 + T) = \\frac{1}{g_m} + \\frac{R_2}{R_1 + R_2}\\left[ R_D \\parallel (R_1 + R_2) \\right]$$\n\n> **Physical Insight:** As $V_{\\text{in}}$ rises, $V_{\\text{out}}$ rises in phase, which pulls the gate voltage $V_F$ up in the same direction as the source. This reduces the net change in $V_{GS}$, causing the transistor to draw less signal current from $V_{\\text{in}}$. Consequently, the negative feedback **increases the input impedance** by a factor of $(1 + T)$.\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nTo find the output resistance, set the independent input source to zero ($v_{\\text{in}} = 0$, grounding the source terminal) and apply a test voltage $v_x$ at the output node:\n* Here, $v_s = 0$ and $v_g = \\beta v_x$, so $v_{gs} = \\beta v_x$.\n* The current $i_x$ drawn from the test source is:\n  $$i_x = \\frac{v_x}{R_D} + \\frac{v_x}{R_1 + R_2} + g_m v_{gs} = \\frac{v_x}{R_L} + \\beta g_m v_x$$\n\nSolving for $R_{\\text{out}} = \\frac{v_x}{i_x}$:\n$$R_{\\text{out}} = \\frac{1}{\\frac{1}{R_L} + \\beta g_m} = \\frac{R_L}{1 + \\beta g_m R_L} = R_D \\parallel (R_1 + R_2) \\parallel \\left(\\frac{1}{\\beta g_m}\\right)$$\n\n> **Physical Insight:** Because the feedback network senses the output voltage in parallel (shunt), negative feedback works to stabilize $V_{\\text{out}}$ against load variations and **reduces the output impedance** by a factor of $(1 + T)$.\n\n---\n\n### 4. Summary of Results (Including Channel-Length Modulation $r_o$)\n\nIf the transistor's finite output resistance $r_o$ is included (with $R_L = R_D \\parallel (R_1 + R_2)$ and $\\beta = \\frac{R_2}{R_1 + R_2}$):\n\n| Parameter | Ideal ($r_o \\to \\infty$) | Exact (Including $r_o$) |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\dfrac{g_m R_L}{1 + \\beta g_m R_L}$ | $\\dfrac{\\left(g_m + \\frac{1}{r_o}\\right)(R_L \\parallel r_o)}{1 + \\beta g_m (R_L \\parallel r_o)}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\dfrac{1}{g_m} + \\beta R_L$ | $\\dfrac{r_o + R_L + \\beta g_m r_o R_L}{1 + g_m r_o}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\dfrac{R_L}{1 + \\beta g_m R_L}$ | $\\dfrac{R_L \\parallel r_o}{1 + \\beta g_m (R_L \\parallel r_o)}$ |",
        "format": "markdown",
        "sha256": "eaec801d69b0f5957cfaf119ca934a789576896766049f827b0b5d154686ee4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain. The extra impedance analysis is not required for full credit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 5444,
        "total_tokens": 6565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3162,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 5444,
        "total_tokens": 6565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3162,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete analysis of the circuit shown in the figure, covering its topology, qualitative behavior, feedback properties, and exact small-signal parameters.\n\n---\n\n### 1. Circuit Identification and Topology\n* **Core Amplifier:** The transistor $M_1$ is configured as a **Common-Gate (CG) amplifier**, where the input signal $V_{\\text{in}}$ is applied to the source and the output signal $V_{\\text{out}}$ is taken at the drain.\n* **Feedback Network:** Resistors $R_1$ and $R_2$ form a voltage divider that senses the output voltage $V_{\\text{out}}$ and produces a proportional feedback voltage $V_F$ at the gate of $M_1$.\n* **Feedback Topology:** **Voltage–Voltage (Series–Shunt) Negative Feedback**. \n  * *Output Sensing (Shunt):* The resistive divider samples the output voltage in parallel.\n  * *Input Mixing (Series):* The transistor naturally takes the voltage difference between its gate and source terminals ($V_{GS} = V_F - V_{\\text{in}}$), subtracting the feedback voltage from the input voltage.\n\n---\n\n### 2. Qualitative Analysis (Feedback Polarity)\nWe can verify that the feedback loop is **negative** by tracing a small perturbation:\n\n1. Suppose $V_{\\text{in}}$ increases ($\\uparrow$).\n2. The gate-source voltage $V_{GS} = V_F - V_{\\text{in}}$ decreases ($\\downarrow$), which decreases the drain current $I_D$ ($\\downarrow$).\n3. Less current through $R_D$ causes the output voltage $V_{\\text{out}}$ to increase ($\\uparrow$).\n4. Because $V_F = \\frac{R_2}{R_1 + R_2}V_{\\text{out}}$, the feedback voltage at the gate $V_F$ also increases ($\\uparrow$).\n5. Since both $V_{\\text{in}}$ (source) and $V_F$ (gate) increase in the same direction, the net change in $V_{GS} = V_F - V_{\\text{in}}$ is **reduced** compared to the case where the gate is held at a fixed AC ground. \n\nBecause the feedback opposes the change in $V_{GS}$, the circuit employs **negative feedback**.\n\n---\n\n### 3. Small-Signal Analysis (Neglecting Channel-Length Modulation & Body Effect)\n\nAssume $M_1$ is in saturation with transconductance $g_m$, and initially neglect channel-length modulation ($\\lambda = 0 \\implies r_o \\to \\infty$) and body effect ($\\gamma = 0 \\implies g_{mb} = 0$).\n\nLet us define two simplifying terms:\n* **Feedback factor ($\\beta$):** \n  $$\\beta = \\frac{v_F}{v_{\\text{out}}} = \\frac{R_2}{R_1 + R_2}$$\n* **Total effective load resistance ($R_L$):**\n  $$R_L = R_D \\parallel (R_1 + R_2) = \\frac{R_D(R_1 + R_2)}{R_D + R_1 + R_2}$$\n\n---\n\n#### A. Closed-Loop Voltage Gain ($A_v$)\nThe small-signal gate-source voltage is:\n$$v_{gs} = v_g - v_s = v_F - v_{\\text{in}} = \\beta v_{\\text{out}} - v_{\\text{in}}$$\n\nThe small-signal drain current is:\n$$i_d = g_m v_{gs} = g_m(\\beta v_{\\text{out}} - v_{\\text{in}})$$\n\nApplying Kirchhoff's Current Law (KCL) at the output node ($V_{\\text{out}}$):\n$$\\frac{v_{\\text{out}}}{R_D} + \\frac{v_{\\text{out}}}{R_1 + R_2} + i_d = 0$$\n\n$$\\frac{v_{\\text{out}}}{R_L} + g_m(\\beta v_{\\text{out}} - v_{\\text{in}}) = 0$$\n\nGrouping the $v_{\\text{out}}$ terms gives:\n$$v_{\\text{out}} \\left( \\frac{1}{R_L} + \\beta g_m \\right) = g_m v_{\\text{in}}$$\n\nSolving for the voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\frac{g_m R_L}{1 + \\beta g_m R_L} = \\frac{g_m \\left[ R_D \\parallel (R_1 + R_2) \\right]}{1 + g_m \\left[ R_D \\parallel (R_1 + R_2) \\right] \\left(\\frac{R_2}{R_1 + R_2}\\right)}$$\n\n* **Open-Loop Gain ($A_0$):** $A_0 = g_m \\left[ R_D \\parallel (R_1 + R_2) \\right]$\n* **Loop Gain ($T$):** $T = \\beta A_0 = g_m \\left[ R_D \\parallel (R_1 + R_2) \\right] \\frac{R_2}{R_1 + R_2}$\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nThe input current $i_{\\text{in}}$ flowing into the source terminal is equal to $-i_d$:\n$$i_{\\text{in}} = -i_d = g_m(v_{\\text{in}} - \\beta v_{\\text{out}}) = g_m v_{\\text{in}} (1 - \\beta A_v)$$\n\nSubstituting $A_v = \\frac{g_m R_L}{1 + \\beta g_m R_L}$:\n$$i_{\\text{in}} = g_m v_{\\text{in}} \\left( 1 - \\frac{\\beta g_m R_L}{1 + \\beta g_m R_L} \\right) = \\frac{g_m}{1 + \\beta g_m R_L} v_{\\text{in}}$$\n\nTherefore, the input resistance is:\n$$R_{\\text{in}} = \\frac{v_{\\text{in}}}{i_{\\text{in}}} = \\frac{1}{g_m}(1 + \\beta g_m R_L) = \\frac{1}{g_m} + \\beta R_L$$\n\n> **Key Takeaway:** Without feedback, a common-gate stage has a low input impedance of $\\frac{1}{g_m}$. Because the feedback mixes in **series** with the input voltage, it **increases** the input impedance by the factor $(1 + T)$.\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nTo find $R_{\\text{out}}$, set the independent input source to zero ($v_{\\text{in}} = 0$, grounding the source) and apply a test voltage $v_x$ at the output node to measure the test current $i_x$:\n* Since $v_s = 0$, we have $v_{gs} = v_F = \\beta v_x$.\n* KCL at the output node yields:\n  $$i_x = \\frac{v_x}{R_D} + \\frac{v_x}{R_1 + R_2} + g_m v_{gs} = v_x \\left( \\frac{1}{R_L} + \\beta g_m \\right)$$\n\nThus, the output resistance is:\n$$R_{\\text{out}} = \\frac{v_x}{i_x} = \\frac{R_L}{1 + \\beta g_m R_L} = R_D \\parallel (R_1 + R_2) \\parallel \\left( \\frac{1}{\\beta g_m} \\right)$$\n\n> **Key Takeaway:** Because the feedback senses the output voltage in **shunt**, it **reduces** the output impedance by the factor $(1 + T)$.\n\n---\n\n### 4. Including Channel-Length Modulation ($r_o$) and Body Effect ($g_{mb}$)\n\nIf $r_o$ and $g_{mb}$ are included, the small-signal drain current is:\n$$i_d = g_m(v_F - v_{\\text{in}}) - g_{mb}v_{\\text{in}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_o}$$\n\nFollowing the same KCL steps at the output node yields the modified expressions:\n\n1. **Voltage Gain:**\n   $$A_v = \\frac{\\left(g_m + g_{mb} + \\frac{1}{r_o}\\right)(R_L \\parallel r_o)}{1 + \\beta g_m (R_L \\parallel r_o)}$$\n\n2. **Output Resistance (assuming input is driven by an ideal voltage source, $v_{\\text{in}} = 0$):**\n   $$R_{\\text{out}} = \\frac{R_L \\parallel r_o}{1 + \\beta g_m (R_L \\parallel r_o)} = R_D \\parallel (R_1 + R_2) \\parallel r_o \\parallel \\left(\\frac{1}{\\beta g_m}\\right)$$\n\n---\n\n### Summary Table\n\n| Parameter | Open-Loop (Standard CG Stage) | Closed-Loop (With Feedback) | Effect of Feedback |\n| :--- | :--- | :--- | :--- |\n| **Feedback Factor ($\\beta$)** | $0$ | $\\dfrac{R_2}{R_1 + R_2}$ | — |\n| **Voltage Gain ($A_v$)** | $A_0 = g_m R_L$ | $\\dfrac{g_m R_L}{1 + \\beta g_m R_L}$ | Decreased by $(1 + \\beta A_0)$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\dfrac{1}{g_m}$ | $\\dfrac{1}{g_m}(1 + \\beta g_m R_L)$ | Increased by $(1 + \\beta A_0)$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $R_L = R_D \\parallel (R_1 + R_2)$ | $\\dfrac{R_L}{1 + \\beta g_m R_L}$ | Decreased by $(1 + \\beta A_0)$ |",
        "format": "markdown",
        "sha256": "97cb7f4e0d307dca75ebffb0bfd041ad36f7316425606cf63c8f95c0c3844a66"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain. The additional small-signal analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 6083,
        "total_tokens": 7204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3743,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 6083,
        "total_tokens": 7204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3743,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a classic CMOS **Source Follower** (also known as a **Common-Drain Amplifier**) biased by a constant current source. \n\nHere is a complete DC (large-signal) and AC (small-signal) analysis of the circuit.\n\n---\n\n### 1. Circuit Identification & Roles of Components\n* **$\\boldsymbol{M_1}$ ( amplifying device):** Configured in a common-drain topology. The input signal ($V_{\\text{in}}$) is applied to the gate, the drain is tied to the AC ground ($V_{DD}$), and the output ($V_{\\text{out}}$) is taken from the source.\n* **$\\boldsymbol{M_2}$ (active load / current sink):** Biased with a fixed DC voltage $V_b$ at its gate. Operating in the saturation region, it acts as a constant current source that sets the DC bias current for $M_1$ while offering a high small-signal impedance to increase linearity and gain.\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nFor proper operation as a buffer, both $M_1$ and $M_2$ must operate in the **saturation region**.\n\n#### **Bias Current ($I_D$)**\nNeglecting channel-length modulation for basic DC intuition, the current set by $M_2$ is:\n$$I_{D2} = \\frac{1}{2}\\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2$$\n\nSince the two transistors are in series, $I_{D1} = I_{D2}$. Therefore, for $M_1$:\n$$I_{D1} = \\frac{1}{2}\\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{\\text{out}} - V_{TH1})^2 = I_{D2}$$\n\n#### **Input-Output Relation**\nSolving for $V_{\\text{out}}$ gives the large-signal transfer characteristic:\n$$V_{\\text{out}} = V_{\\text{in}} - V_{GS1} = V_{\\text{in}} - V_{TH1} - \\sqrt{\\frac{2I_{D2}}{\\mu_n C_{\\text{ox}} (W/L)_1}}$$\n\n* **Level Shifting:** The output DC level \"follows\" the input voltage, shifted down by a constant gate-source voltage $V_{GS1}$.\n* **Body Effect on $M_1$:** Assuming the substrates (bulks) of both NMOS transistors are tied to ground, the source-to-body voltage of $M_1$ is $V_{SB1} = V_{\\text{out}}$. As $V_{\\text{in}}$ (and thus $V_{\\text{out}}$) increases, the threshold voltage $V_{TH1}$ increases due to the **body effect**, making the relationship slightly non-linear:\n  $$V_{TH1} = V_{TH0} + \\gamma \\left( \\sqrt{|2\\phi_F + V_{\\text{out}}|} - \\sqrt{|2\\phi_F|} \\right)$$\n\n#### **Operating Limits (Voltage Swing)**\n1. **Minimum Output Voltage ($V_{\\text{out,min}}$):** Determined by the point where $M_2$ leaves saturation and enters the triode region:\n   $$V_{\\text{out,min}} = V_{OV2} = V_b - V_{TH2}$$\n   *(This occurrs when $V_{\\text{in}} = V_b - V_{TH2} + V_{GS1}$.)*\n2. **Maximum Input Voltage ($V_{\\text{in,max}}$):** $M_1$ remains in saturation as long as $V_{GD1} < V_{TH1}$, which means $V_{\\text{in}} < V_{DD} + V_{TH1}$. Usually, the upper swing is simply limited by the supply rail $V_{DD}$, giving a maximum output of:\n   $$V_{\\text{out,max}} \\approx V_{DD} - V_{GS1}$$\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\nIn the small-signal model:\n* $V_{DD}$ and $V_b$ become AC grounds.\n* Since $v_{gs2} = 0$, $M_2$ simply acts as a resistor of value $r_{o2}$ connected from the output node to ground.\n* Because the source of $M_1$ is tied to $V_{\\text{out}}$, both the gate-source voltage ($v_{gs1} = v_{\\text{in}} - v_{\\text{out}}$) and the body-source voltage ($v_{bs1} = -v_{\\text{out}}$) depend on the output.\n\n#### **A. Input Impedance ($R_{\\text{in}}$)**\nLooking into the gate of $M_1$ at low frequencies, the input impedance is purely capacitive (open circuit):\n$$R_{\\text{in}} = \\infty$$\n\n#### **B. Output Impedance ($R_{\\text{out}}$)**\nTo find $R_{\\text{out}}$, we set $v_{\\text{in}} = 0$ (ground the gate of $M_1$) and look into the $V_{\\text{out}}$ node:\n* Looking up into the source of $M_1$, we see the resistances $\\frac{1}{g_{m1}}$, $\\frac{1}{g_{mb1}}$, and $r_{o1}$ in parallel.\n* Looking down into the drain of $M_2$, we see $r_{o2}$.\n\nCombining these in parallel:\n$$R_{\\text{out}} = \\frac{1}{g_{m1}} \\parallel \\frac{1}{g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} = \\frac{1}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}$$\n\nSince $g_{m1} \\gg \\frac{1}{r_{o1}}, \\frac{1}{r_{o2}}$, this is commonly approximated as:\n$$R_{\\text{out}} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n*(This is a relatively **low** output impedance).*\n\n#### **C. Small-Signal Voltage Gain ($A_v$)**\nApplying Kirchhoff's Current Law (KCL) at the $V_{\\text{out}}$ node:\n$$g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1}v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1}} - \\frac{v_{\\text{out}}}{r_{o2}} = 0$$\n\nSolving for $\\frac{v_{\\text{out}}}{v_{\\text{in}}}$ yields the exact low-frequency voltage gain:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} = \\frac{r_{o1} \\parallel r_{o2}}{\\frac{1}{g_{m1}} + (1 + \\eta)(r_{o1} \\parallel r_{o2})}$$\n*(where $\\eta = \\frac{g_{mb1}}{g_{m1}}$ is the body-effect factor, typically around $0.1\\text{ to }0.3$).*\n\n**Approximations for Gain:**\n1. **Ignoring channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$):**\n   $$A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta} \\quad (\\text{typically } \\approx 0.75\\text{ to }0.9)$$\n2. **If the body of $M_1$ is tied to its source ($g_{mb1} = 0$, possible in a deep N-well process):**\n   $$A_v = \\frac{g_{m1}(r_{o1} \\parallel r_{o2})}{1 + g_{m1}(r_{o1} \\parallel r_{o2})} \\approx 1$$\n\n---\n\n### 4. Summary & Applications\n\n| Parameter | Characteristic | Typical Value / Formula |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | Positive, slightly less than unity | $\\approx 0.8 \\text{ V/V}$ (with body effect) |\n| **Input Impedance ($R_{\\text{in}}$)** | Very High | $\\infty$ (at low frequencies) |\n| **Output Impedance ($R_{\\text{out}}$)** | Low | $\\approx \\frac{1}{g_{m1} + g_{mb1}}$ (tens to hundreds of $\\Omega$) |\n\n**Primary Applications:**\n1. **Voltage Buffer:** Because it has a very high input impedance and a low output impedance, it is placed between a high-impedance gain stage (like a Common-Source or Cascode stage) and a low-impedance load so the gain of the first stage isn't degraded.\n2. **DC Level Shifter:** Used to step down a DC voltage level by $V_{GS1}$ between stages in multi-stage amplifiers.",
        "format": "markdown",
        "sha256": "f3d4e0f378bb52d93a5b66f490d35ef826a9967fe0fb9b5154d75a255418c709"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as a current sink and gives a positive, sub-unity gain. Its gain expression is equivalent to the golden solution, including body effect and finite output resistances.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4167,
        "total_tokens": 5310,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2059,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4167,
        "total_tokens": 5310,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2059,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a classic **NMOS Source Follower** (also known as a **Common-Drain Amplifier**) biased with a current-source load. \n\nHere is a complete large-signal (DC) and small-signal (AC) analysis of the circuit, following standard CMOS analog design conventions (such as those in Behzad Razavi's *Design of Analog CMOS Integrated Circuits*).\n\n---\n\n### 1. Circuit Overview & Role of Components\n* **$M_1$ (Amplifying/Buffering Device):** Configured with the input at its gate, the output at its source, and its drain tied to the positive supply ($V_{DD}$). Its source voltage \"follows\" the input gate voltage.\n* **$M_2$ (Current-Source Load):** Biased by a fixed DC voltage $V_b$ at its gate. When operating in the saturation region, it acts as a constant current sink ($I_{D2}$) to bias $M_1$.\n* **Primary Purpose:** It functions as a **voltage buffer** (providing high input impedance and low output impedance) or as a **DC level shifter**.\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nTo operate properly as a linear buffer, **both $M_1$ and $M_2$ must operate in the saturation region.**\n\n#### A. Operating Regions as $V_{\\text{in}}$ Varies:\n1. **Cutoff ($V_{\\text{in}} < V_{TH1}$):** \n   $M_1$ is OFF. $M_2$ has no current flowing through it and pulls $V_{\\text{out}}$ all the way down to $0\\text{ V}$ (deep triode region).\n2. **$M_1$ Saturated, $M_2$ in Triode ($V_{TH1} < V_{\\text{in}} < V_{\\text{in,min}}$):**\n   As $V_{\\text{in}}$ exceeds $V_{TH1}$, $M_1$ turns on in saturation (since its drain is at $V_{DD}$, ensuring $V_{DS1} > V_{GS1} - V_{TH1}$). $V_{\\text{out}}$ begins to rise, but is initially too low to keep $M_2$ in saturation.\n3. **Normal Operation — Both in Saturation:**\n   For $M_2$ to enter saturation, the output voltage must reach at least the overdrive voltage of $M_2$:\n   $$V_{\\text{out,min}} = V_b - V_{TH2} = V_{OV2}$$\n   For $M_1$ to remain in saturation, we require $V_{DS1} \\ge V_{GS1} - V_{TH1}$, which simplifies to:\n   $$V_{DD} - V_{\\text{out}} \\ge V_{\\text{in}} - V_{\\text{out}} - V_{TH1} \\implies V_{\\text{in,max}} = V_{DD} + V_{TH1}$$\n\n#### B. Input-Output Relationship (in Saturation):\nNeglecting channel-length modulation, the drain currents of $M_1$ and $M_2$ are equal ($I_{D1} = I_{D2}$):\n$$\\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{\\text{out}} - V_{TH1})^2 = \\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2$$\n\nSolving for $V_{\\text{out}}$ gives:\n$$V_{\\text{out}} = V_{\\text{in}} - V_{GS1}$$\nwhere the constant gate-source voltage drop across $M_1$ is:\n$$V_{GS1} = V_{TH1} + \\sqrt{\\frac{(W/L)_2}{(W/L)_1}}(V_b - V_{TH2})$$\n\n*(Note: If the bulk/substrate of $M_1$ is tied to ground, $V_{TH1}$ increases with $V_{\\text{out}}$ due to the **body effect**, making this relationship slightly nonlinear).*\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\nAssuming both transistors are biased in saturation, we can determine the small-signal parameters. Note that for $M_2$, the gate and source are at AC ground ($v_{gs2} = 0$ and $v_{bs2} = 0$), so $M_2$ simply acts as a passive output resistance $r_{o2}$.\n\n#### A. Input Resistance ($R_{\\text{in}}$)\nBecause the input is connected purely to the insulated gate of $M_1$, the low-frequency small-signal input resistance is infinite:\n$$R_{\\text{in}} = \\infty$$\n\n#### B. Output Resistance ($R_{\\text{out}}$)\nTo find $R_{\\text{out}}$, we set the independent input source $v_{\\text{in}} = 0$ (ground the gate of $M_1$) and look into the $V_{\\text{out}}$ node:\n* Looking up into the source of $M_1$, we see a resistance of $\\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1}$.\n* Looking down into the drain of $M_2$, we see $r_{o2}$.\n\nCombining all parallel paths to AC ground:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} = \\frac{1}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}$$\n\nSince $g_{m1} \\gg \\frac{1}{r_{o1}}, \\frac{1}{r_{o2}}$, this is commonly approximated as:\n$$R_{\\text{out}} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n#### C. Small-Signal Voltage Gain ($A_v$)\nUsing the small-signal model, the voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$ is given by $A_v = G_m R_{\\text{out}}$, where $G_m = g_{m1}$:\n\n$$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}$$\n\nAlternatively, dividing numerator and denominator by $g_{m1}$ and defining $\\eta = \\frac{g_{mb1}}{g_{m1}}$:\n$$A_v = \\frac{r_{o1} \\parallel r_{o2}}{\\frac{1}{g_{m1}} + (1 + \\eta)(r_{o1} \\parallel r_{o2})}$$\n\n* **Case 1: Neglecting channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$):**\n  $$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta} < 1$$\n  *(Typically, $\\eta \\approx 0.1 \\text{ to } 0.3$, giving a voltage gain around $0.75 \\text{ to } 0.9$).*\n\n* **Case 2: Neglecting both body effect and channel-length modulation ($g_{mb1} = 0$, $r_o \\to \\infty$):**\n  $$A_v = 1$$\n\n---\n\n### 4. Summary of Key Characteristics\n\n| Parameter | Exact Expression | Typical Approximation | Characteristic |\n| :--- | :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | $\\dfrac{g_{m1}}{g_{m1} + g_{mb1} + g_{ds1} + g_{ds2}}$ | $\\dfrac{g_{m1}}{g_{m1} + g_{mb1}} \\lesssim 1$ | Non-inverting, slightly less than unity |\n| **Input Impedance ($R_{\\text{in}}$)** | $\\infty$ | $\\infty$ | Extremely high (ideal for buffering) |\n| **Output Impedance ($R_{\\text{out}}$)** | $\\dfrac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2}$ | $\\dfrac{1}{g_{m1} + g_{mb1}}$ | Relatively low (good for driving loads) |\n| **Output Voltage Swing** | $V_b - V_{TH2} \\le V_{\\text{out}} \\le V_{DD} - V_{OV1}$ | Limited by $V_{GS1}$ drop | Restricted headroom due to $V_{GS}$ shift |",
        "format": "markdown",
        "sha256": "8a2b57ec1a296aeb77398d04049fdf0b6c70e0b04faf910d0b6f6cd40e765cfe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, and gives the non-inverting, sub-unity gain and matching small-signal expressions. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4155,
        "total_tokens": 5298,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4155,
        "total_tokens": 5298,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **CMOS Source Follower** (also known as a **Common-Drain Amplifier**) biased with an active current-source load. \n\nHere is a complete large-signal (DC) and small-signal (AC) analysis of the circuit.\n\n---\n\n### 1. Circuit Overview & Roles of Components\n* **$\\boldsymbol{M_1}$ ( amplifying device):** Configured with its drain tied to $V_{DD}$, input applied to its gate ($V_{\\text{in}}$), and output taken from its source ($V_{\\text{out}}$). Because the output \"follows\" the input voltage minus a gate-source voltage drop, it acts as a voltage buffer and DC level shifter.\n* **$\\boldsymbol{M_2}$ (active load / current sink):** Biased with a fixed DC gate voltage $V_b$. When operating in saturation, $M_2$ acts as a constant current source that sets the DC bias current ($I_D$) for $M_1$.\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nAssuming $V_b > V_{TH2}$ so that $M_2$ is capable of conducting, let us trace how $V_{\\text{out}}$ behaves as $V_{\\text{in}}$ sweeps from $0$ to $V_{DD}$:\n\n1. **Cutoff Region ($V_{\\text{in}} < V_{TH1}$):**\n   * $M_1$ is **OFF**. \n   * $M_2$ has no current flowing through it, pulling the output node completely to ground ($V_{\\text{out}} = 0\\text{ V}$). $M_2$ is in the deep triode region with zero drain current.\n\n2. **Turn-On / $M_2$ in Triode ($V_{TH1} \\le V_{\\text{in}} < V_{\\text{in,sat}}$):**\n   * As $V_{\\text{in}}$ exceeds $V_{TH1}$, $M_1$ turns **ON** directly into **saturation** (since $V_{DS1} = V_{DD} - V_{\\text{out}} > V_{\\text{in}} - V_{\\text{out}} - V_{TH1}$).\n   * $V_{\\text{out}}$ begins to rise, pulling $M_2$ out of zero-bias. However, while $V_{\\text{out}} < V_b - V_{TH2}$, $M_2$ remains in the **triode region**.\n\n3. **Normal Operating Region ($V_{\\text{out}} \\ge V_b - V_{TH2}$):**\n   * Once $V_{\\text{out}}$ exceeds the overdrive voltage of $M_2$ ($V_{OV2} = V_b - V_{TH2}$), **both $M_1$ and $M_2$ operate in saturation**.\n   * Neglecting channel-length modulation, $M_2$ sinks a constant current:\n     $$I_{D2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2$$\n   * Since $I_{D1} = I_{D2}$, the gate-source voltage of $M_1$ ($V_{GS1} = V_{\\text{in}} - V_{\\text{out}}$) must remain roughly constant to support this current:\n     $$\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{\\text{out}} - V_{TH1})^2 = I_{D2}$$\n   * Solving for $V_{\\text{out}}$ gives the input-output transfer characteristic:\n     $$V_{\\text{out}} = V_{\\text{in}} - V_{GS1} = V_{\\text{in}} - V_{TH1} - \\sqrt{\\frac{2I_{D2}}{\\mu_n C_{ox} (W/L)_1}}$$\n\n> **Note on Body Effect:** In a standard p-substrate technology, the bulk (body) of both NMOS transistors is tied to ground. Since the source of $M_1$ is at $V_{\\text{out}}$, its source-bulk voltage is $V_{SB1} = V_{\\text{out}} > 0$. As $V_{\\text{out}}$ increases, the threshold voltage $V_{TH1}$ increases due to the **body effect**:\n> $$V_{TH1} = V_{TH0} + \\gamma\\left(\\sqrt{|2\\phi_F| + V_{\\text{out}}} - \\sqrt{|2\\phi_F|}\\right)$$\n> This introduces nonlinearity into the follower's transfer characteristic and reduces the voltage gain below unity.\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\nAssuming both transistors are biased in saturation, we can find the small-signal parameters around the DC operating point:\n\n#### A. Input Resistance ($R_{\\text{in}}$)\nBecause the input is connected purely to the insulated gate of $M_1$, the low-frequency input resistance is extremely high (ideally infinite):\n$$R_{\\text{in}} = \\infty$$\n\n#### B. Output Resistance ($R_{\\text{out}}$)\nTo find $R_{\\text{out}}$, we ground the small-signal input ($v_{\\text{in}} = 0$) and look into the $V_{\\text{out}}$ node:\n* Looking up into the source of $M_1$, we see a resistance of $\\frac{1}{g_{m1} + g_{mb1}}$ in parallel with $r_{o1}$.\n* Looking down into the drain of $M_2$, we see its output resistance $r_{o2}$.\n\nCombining all parallel paths to AC ground:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} = \\frac{1}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}$$\n\nSince $g_{m1} \\gg \\frac{1}{r_{o1}}, \\frac{1}{r_{o2}}$, this simplifies to a **low output impedance**:\n$$R_{\\text{out}} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n#### C. Small-Signal Voltage Gain ($A_v$)\nUsing the small-signal model, the voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$ is given by:\n$$A_v = \\frac{g_{m1} \\left(r_{o1} \\parallel r_{o2}\\right)}{1 + (g_{m1} + g_{mb1})\\left(r_{o1} \\parallel r_{o2}\\right)} = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}$$\n\n**Special Cases for Gain:**\n1. **Neglecting channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$):**\n   $$A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta}$$\n   *(where $\\eta = \\frac{g_{mb1}}{g_{m1}}$, typically resulting in a gain between $0.7$ and $0.85$).*\n2. **Neglecting both channel-length modulation and body effect ($g_{mb1} = 0$):**\n   $$A_v = 1 \\text{ V/V}$$\n\n---\n\n### 4. Summary of Performance & Applications\n\n| Parameter | Characteristic | Typical Value / Expression |\n| :--- | :--- | :--- |\n| **Voltage Gain ($A_v$)** | Positive, slightly less than $1$ | $\\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} \\approx 0.8\\text{ V/V}$ |\n| **Input Impedance ($R_{\\text{in}}$)** | Very High | $\\infty$ (at DC/low frequencies) |\n| **Output Impedance ($R_{\\text{out}}$)** | Low | $\\approx \\frac{1}{g_{m1} + g_{mb1}}$ (typically $100\\ \\Omega - 1\\text{ k}\\Omega$) |\n| **Output Voltage Swing** | Limited by $V_{GS1}$ and $V_{OV2}$ | $V_b - V_{TH2} \\le V_{\\text{out}} \\le V_{\\text{in,max}} - V_{GS1}$ |\n\n**Primary Applications:**\n1. **Voltage Buffer:** Used as an output stage to drive low-impedance resistive or large capacitive loads without loading down a previous high-gain, high-impedance amplifier stage.\n2. **DC Level Shifter:** Drops the DC level of a signal by a predictable amount ($V_{GS1}$).",
        "format": "markdown",
        "sha256": "5c1261871420d8b57b0b8049df167e0031d2f5daf29f3570e790b1f1eedd7757"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current-source load, and gives a positive gain below unity with appropriate body-effect and output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4104,
        "total_tokens": 5247,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4104,
        "total_tokens": 5247,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is the fundamental **CMOS Inverter** (in digital electronics) or a **Complementary Common-Source (Push-Pull) Amplifier** (in analog electronics). \n\nIt consists of two enhancement-mode MOSFETs connected in a complementary configuration:\n* **$M_1$ (Bottom):** An **NMOS** transistor with its source grounded ($V_{S1} = 0\\text{ V}$).\n* **$M_2$ (Top):** A **PMOS** transistor with its source connected to the positive supply voltage ($V_{S2} = V_{DD}$).\n* **Input ($V_{\\text{in}}$):** Connected to the gates of both transistors ($V_{G1} = V_{G2} = V_{\\text{in}}$).\n* **Output ($V_{\\text{out}}$):** Taken from the common drain node of both transistors ($V_{D1} = V_{D2} = V_{\\text{out}}$).\n\nDepending on the context of your course, this circuit can be analyzed from a **Large-Signal (Digital/DC)** perspective or a **Small-Signal (Analog Amplifier)** perspective. Both are detailed below.\n\n---\n\n### 1. Large-Signal (DC) Analysis: Voltage Transfer Characteristic\n\nWe can analyze how $V_{\\text{out}}$ responds as $V_{\\text{in}}$ sweeps from $0\\text{ V}$ to $V_{DD}$. Let $V_{TH1} > 0$ be the threshold voltage of the NMOS ($M_1$) and $V_{TH2} < 0$ be the threshold voltage of the PMOS ($M_2$).\n\n1. **Region I: $0 \\le V_{\\text{in}} < V_{TH1}$ (Logic LOW Input)**\n   * **$M_1$ is OFF (Cutoff):** Since $V_{GS1} = V_{\\text{in}} < V_{TH1}$, no current can flow through $M_1$.\n   * **$M_2$ is ON (Deep Triode):** Since $V_{SG2} = V_{DD} - V_{\\text{in}} > |V_{TH2}|$, $M_2$ is strongly conducting. However, because $M_1$ is off, the drain current is zero ($I_D = 0$).\n   * **Output:** $M_2$ pulls the output entirely up to the supply rail through a low-resistance channel: \n     $$V_{\\text{out}} = V_{DD} \\quad (\\text{Logic HIGH})$$\n\n2. **Region II: $V_{TH1} \\le V_{\\text{in}} < V_{\\text{out}} + V_{TH1}$**\n   * **$M_1$ enters Saturation:** $V_{\\text{in}}$ exceeds $V_{TH1}$, turning $M_1$ on. Because $V_{\\text{out}}$ is still high, $V_{DS1} > V_{GS1} - V_{TH1}$.\n   * **$M_2$ remains in Triode:** A small current now flows from $V_{DD}$ to ground, causing $V_{\\text{out}}$ to begin dropping slightly below $V_{DD}$.\n\n3. **Region III: $V_{\\text{out}} - |V_{TH2}| \\le V_{\\text{in}} \\le V_{\\text{out}} + V_{TH1}$ (Transition / High-Gain Region)**\n   * **Both $M_1$ and $M_2$ are in Saturation:** Both transistors act as voltage-controlled current sources. \n   * In this narrow input range (around the switching threshold $V_M \\approx V_{DD}/2$ for matched devices), a tiny change in $V_{\\text{in}}$ causes a massive drop in $V_{\\text{out}}$. This is where the circuit acts as an **analog amplifier**.\n\n4. **Region IV: $V_{\\text{out}} + V_{TH1} < V_{\\text{in}} \\le V_{DD} - |V_{TH2}|$**\n   * **$M_1$ enters Triode:** $V_{\\text{out}}$ has dropped low enough that $V_{DS1} < V_{GS1} - V_{TH1}$.\n   * **$M_2$ remains in Saturation:** As $V_{\\text{in}}$ approaches $V_{DD} - |V_{TH2}|$, the current decreases rapidly.\n\n5. **Region V: $V_{DD} - |V_{TH2}| < V_{\\text{in}} \\le V_{DD}$ (Logic HIGH Input)**\n   * **$M_2$ is OFF (Cutoff):** Since $V_{SG2} = V_{DD} - V_{\\text{in}} < |V_{TH2}|$, $M_2$ disconnects the output from $V_{DD}$.\n   * **$M_1$ is ON (Deep Triode):** $M_1$ has a strong channel with zero current flowing through it ($I_D = 0$).\n   * **Output:** $M_1$ pulls the output entirely down to ground:\n     $$V_{\\text{out}} = 0\\text{ V} \\quad (\\text{Logic LOW})$$\n\n---\n\n### 2. Small-Signal (Analog) Analysis\n\n*(Note: This diagram is directly from Behzad Razavi's microelectronics textbooks, where it is frequently analyzed as an analog gain stage biased in **Region III** where both $M_1$ and $M_2$ are in saturation).*\n\nWhen biased in saturation, both transistors amplify the input signal simultaneously:\n\n#### **A. Equivalent Transconductance ($G_m$)**\nTo find the total transconductance, ground the output for AC signals ($v_{\\text{out}} = 0$) and apply a small-signal input $v_{\\text{in}}$:\n* For $M_1$: $v_{gs1} = v_{\\text{in}}$, generating a downward drain current of $i_{d1} = g_{m1}v_{\\text{in}}$.\n* For $M_2$: Since $V_{DD}$ is an AC ground, $v_{gs2} = v_{\\text{in}}$, which pulls an additional downward current of $i_{d2} = g_{m2}v_{\\text{in}}$ from the output node.\n* The total short-circuit output current is $i_{\\text{out}} = (g_{m1} + g_{m2})v_{\\text{in}}$, giving:\n  $$G_m = g_{m1} + g_{m2}$$\n\n#### **B. Output Resistance ($R_{\\text{out}}$)**\nTo find the output resistance, set the small-signal input to zero ($v_{\\text{in}} = 0$):\n* Both gates are now at AC ground ($v_{gs1} = v_{gs2} = 0$).\n* Looking down into the drain of $M_1$, we see its output resistance $r_{o1}$.\n* Looking up into the drain of $M_2$, we see its output resistance $r_{o2}$.\n* Since both share the output node and are connected to AC grounds at their sources, they appear in parallel:\n  $$R_{\\text{out}} = r_{o1} \\parallel r_{o2} = \\frac{r_{o1}r_{o2}}{r_{o1} + r_{o2}}$$\n\n#### **C. Small-Signal Voltage Gain ($A_v$)**\nCombining the transconductance and output resistance gives the small-signal voltage gain:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -G_m R_{\\text{out}} = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$$\n\n---\n\n### Summary of Key Advantages\n1. **Digital Context (Inverter):**\n   * **Zero Static Power Dissipation:** In either steady logic state ($V_{\\text{in}} = 0$ or $V_{\\text{in}} = V_{DD}$), one transistor is completely OFF, so no DC current flows from $V_{DD}$ to ground.\n   * **Rail-to-Rail Output Swing:** Output swings fully from $0\\text{ V}$ to $V_{DD}$, providing maximum noise margins.\n2. **Analog Context (Amplifier):**\n   * **Current Reuse:** Both transistors share the same DC bias current $I_D$, yet their transconductances add together ($g_{m1} + g_{m2}$). This roughly doubles the effective transconductance per unit of bias current compared to a standard common-source amplifier with a passive current-source load.",
        "format": "markdown",
        "sha256": "99e5e91a0356cb8d078e678f376579f0c8e120a031f94152a85b068a1815edba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up. The stated logic-level behavior and negative small-signal gain are consistent with inverter operation; further analysis is optional.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4002,
        "total_tokens": 5145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4002,
        "total_tokens": 5145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor Inverter), which can also function as an analog **CMOS Push-Pull Amplifier** (or complementary common-source stage). \n\nBecause the prompt is open-ended, below is a complete analysis covering its **components**, **digital operation**, **large-signal behavior**, and **small-signal (analog) characteristics**.\n\n---\n\n### 1. Component Identification\n* **$M_1$ (Bottom Transistor):** An **NMOS** (N-channel MOSFET) transistor.\n  * **Source ($S_1$):** Connected to ground ($0\\text{ V}$).\n  * **Gate ($G_1$):** Connected to the input voltage, $V_{\\text{in}}$.\n  * **Drain ($D_1$):** Connected to the output voltage, $V_{\\text{out}}$.\n* **$M_2$ (Top Transistor):** A **PMOS** (P-channel MOSFET) transistor.\n  * **Source ($S_2$):** Connected to the positive power supply, $V_{DD}$.\n  * **Gate ($G_2$):** Connected to the input voltage, $V_{\\text{in}}$.\n  * **Drain ($D_2$):** Connected to the output voltage, $V_{\\text{out}}$.\n\n---\n\n### 2. Digital Analysis (Logic Inverter)\nIn digital circuits, $V_{\\text{in}}$ takes on binary values: Logic Low ($0\\text{ V}$) or Logic High ($V_{DD}$).\n\n1. **When $V_{\\text{in}} = 0\\text{ V}$ (Logic '0'):**\n   * **NMOS ($M_1$):** The gate-to-source voltage is $V_{GS1} = 0\\text{ V}$. Since $V_{GS1} < V_{TH1}$ (threshold voltage), $M_1$ is **OFF** (open circuit).\n   * **PMOS ($M_2$):** The source-to-gate voltage is $V_{SG2} = V_{DD} - 0\\text{ V} = V_{DD}$. Since $V_{SG2} > |V_{TH2}|$, $M_2$ is **ON** (operates in the deep triode region like a closed switch).\n   * **Output:** $M_2$ pulls the output node up to the supply voltage, so **$V_{\\text{out}} = V_{DD}$ (Logic '1')**.\n\n2. **When $V_{\\text{in}} = V_{DD}$ (Logic '1'):**\n   * **NMOS ($M_1$):** $V_{GS1} = V_{DD} > V_{TH1}$, so $M_1$ is **ON** (closed switch to ground).\n   * **PMOS ($M_2$):** $V_{SG2} = V_{DD} - V_{DD} = 0\\text{ V} < |V_{TH2}|$, so $M_2$ is **OFF** (open circuit).\n   * **Output:** $M_1$ pulls the output node down to ground, so **$V_{\\text{out}} = 0\\text{ V}$ (Logic '0')**.\n\n* **Key Digital Advantage:** In either steady state ($0\\text{ V}$ or $V_{DD}$), one transistor is always OFF. Therefore, **zero static DC current** flows from $V_{DD}$ to ground, resulting in nearly zero static power consumption.\n\n---\n\n### 3. Large-Signal Analysis (Sweeping $V_{\\text{in}}$ from $0$ to $V_{DD}$)\nAs $V_{\\text{in}}$ smoothly increases from $0\\text{ V}$ to $V_{DD}$, the circuit transitions through **five distinct regions of operation** (known as the Voltage Transfer Characteristic, or VTC):\n\n| Region | Input Range ($V_{\\text{in}}$) | State of $M_1$ (NMOS) | State of $M_2$ (PMOS) | Output ($V_{\\text{out}}$) |\n| :--- | :--- | :--- | :--- | :--- |\n| **1** | $0 \\le V_{\\text{in}} < V_{TH1}$ | Cutoff (OFF) | Triode | $V_{\\text{out}} = V_{DD}$ |\n| **2** | $V_{TH1} \\le V_{\\text{in}} < V_{\\text{out}} + |V_{TH2}|$ | Saturation | Triode | Drops slowly below $V_{DD}$ |\n| **3** | $V_{\\text{in}} \\approx \\frac{V_{DD}}{2}$ *(Transition)* | **Saturation** | **Saturation** | Drops sharply (High Gain) |\n| **4** | $V_{\\text{out}} + V_{TH1} < V_{\\text{in}} \\le V_{DD} - |V_{TH2}|$ | Triode | Saturation | Approaches $0\\text{ V}$ |\n| **5** | $V_{DD} - |V_{TH2}| < V_{\\text{in}} \\le V_{DD}$ | Triode | Cutoff (OFF) | $V_{\\text{out}} = 0\\text{ V}$ |\n\n---\n\n### 4. Small-Signal Analysis (Analog Amplifier)\nWhen biased in **Region 3** (where both $M_1$ and $M_2$ are in saturation), the circuit acts as a high-efficiency **push-pull common-source amplifier**. Both transistors amplify the input signal simultaneously:\n\n* **Transconductance ($G_m$):** \n  Because the AC input voltage $v_{\\text{in}}$ drives both gates in parallel, the small-signal drain currents add together:\n  $$G_m = g_{m1} + g_{m2}$$\n  *(This is known as \"current reuse\"—you get the transconductance of two transistors for the bias current of one).*\n\n* **Input Resistance ($R_{\\text{in}}$):** \n  Looking into the insulated gates of the MOSFETs:\n  $$R_{\\text{in}} = \\infty$$\n\n* **Output Resistance ($R_{\\text{out}}$):** \n  Looking into the drains of both $M_1$ and $M_2$ (with $V_{\\text{in}}$ grounded for AC analysis):\n  $$R_{\\text{out}} = r_{o1} \\parallel r_{o2} = \\frac{r_{o1} r_{o2}}{r_{o1} + r_{o2}}$$\n\n* **Small-Signal Voltage Gain ($A_v$):**\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -G_m R_{\\text{out}} = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$$",
        "format": "markdown",
        "sha256": "b8b5bbcf065edb38bbd208ac92e7d4f8a31301f2594de5d864e0966340d8118a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up, and describes the logic operation correctly. The small-signal gain also matches the expected inverting gain; the optional region details do not undermine the essential answer.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 3310,
        "total_tokens": 4453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 3310,
        "total_tokens": 4453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is one of the most fundamental building blocks in microelectronics. Depending on its application, it is known as a **CMOS Inverter** (in digital electronics) or a **Complementary Common-Source (Push-Pull) Amplifier** (in analog electronics).\n\nHere is a complete analysis of the circuit from both **large-signal (digital)** and **small-signal (analog)** perspectives.\n\n---\n\n### 1. Component Identification\n* **$M_1$ (Bottom Transistor):** An **NMOS** transistor with its source connected to ground ($0\\text{ V}$), gate connected to $V_{\\text{in}}$, and drain connected to $V_{\\text{out}}$.\n* **$M_2$ (Top Transistor):** A **PMOS** transistor with its source connected to the positive supply ($V_{DD}$), gate connected to $V_{\\text{in}}$, and drain connected to $V_{\\text{out}}$.\n\nTherefore, the gate-source voltages for the two transistors are:\n$$V_{GS1} = V_{\\text{in}}$$\n$$V_{SG2} = V_{DD} - V_{\\text{in}}$$\n\n---\n\n### 2. Large-Signal Analysis (Voltage Transfer Characteristic)\nTo understand how the circuit behaves across all possible input voltages, we sweep $V_{\\text{in}}$ from $0\\text{ V}$ to $V_{DD}$ (assuming $V_{DD} > V_{TH1} + |V_{TH2}|$, where $V_{TH1}$ and $V_{TH2}$ are the threshold voltages of $M_1$ and $M_2$, respectively):\n\n1. **Region I: Low Input ($0 \\le V_{\\text{in}} < V_{TH1}$)**\n   * **$M_1$ is OFF (Cutoff):** Since $V_{GS1} < V_{TH1}$, no current can flow through $M_1$ ($I_{D1} = 0$).\n   * **$M_2$ is ON (Deep Triode):** Since $V_{SG2} = V_{DD} - V_{\\text{in}} > |V_{TH2}|$, $M_2$ forms a conducting channel. However, because $M_1$ is off and the output draws no current, the current through $M_2$ must also be zero ($I_{D2} = I_{D1} = 0$). \n   * **Output:** With zero current through the conducting PMOS channel, there is zero voltage drop across $M_2$, pulling the output all the way up to the supply rail:\n     $$V_{\\text{out}} = V_{DD}$$\n\n2. **Region II: $V_{\\text{in}}$ increases above $V_{TH1}$**\n   * **$M_1$ enters Saturation:** $M_1$ turns on, and since $V_{\\text{out}}$ is still high ($V_{\\text{out}} > V_{\\text{in}} - V_{TH1}$), $M_1$ operates in saturation.\n   * **$M_2$ remains in Triode:** Current now flows from $V_{DD}$ to ground ($I_{D1} = I_{D2} > 0$), causing $V_{\\text{out}}$ to drop slightly below $V_{DD}$.\n\n3. **Region III: The Transition Region ($V_{\\text{in}} \\approx \\frac{V_{DD}}{2}$)**\n   * **Both $M_1$ and $M_2$ are in Saturation:** When $V_{\\text{out}}$ drops below $V_{\\text{in}} + |V_{TH2}|$ (while remaining above $V_{\\text{in}} - V_{TH1}$), both transistors act as voltage-controlled current sources.\n   * Because both devices have high output impedances in saturation, a tiny change in $V_{\\text{in}}$ causes a massive drop in $V_{\\text{out}}$. This is the **high-gain region** used for analog amplification.\n\n4. **Region IV: $V_{\\text{in}}$ approaches $V_{DD} - |V_{TH2}|$**\n   * **$M_1$ enters Triode:** $V_{\\text{out}}$ drops below $V_{\\text{in}} - V_{TH1}$, pushing $M_1$ into the triode region.\n   * **$M_2$ remains in Saturation:** $M_2$ is still weakly on, supplying a small current.\n\n5. **Region V: High Input ($V_{DD} - |V_{TH2}| < V_{\\text{in}} \\le V_{DD}$)**\n   * **$M_2$ is OFF (Cutoff):** Since $V_{SG2} < |V_{TH2}|$, the PMOS turns completely off ($I_{D2} = 0$).\n   * **$M_1$ is ON (Deep Triode):** $M_1$ has a strong channel with zero current flowing through it, pulling the output all the way down to ground:\n     $$V_{\\text{out}} = 0\\text{ V}$$\n\n#### Summary Table of Operating Regions:\n| Region | Input Voltage ($V_{\\text{in}}$) | Output Voltage ($V_{\\text{out}}$) | $M_1$ (NMOS) State | $M_2$ (PMOS) State |\n| :--- | :--- | :--- | :--- | :--- |\n| **I** | $V_{\\text{in}} < V_{TH1}$ | $V_{DD}$ (Logic 1) | Cutoff (OFF) | Triode (ON) |\n| **II** | $V_{\\text{in}} > V_{TH1}$ | Drops slightly below $V_{DD}$ | Saturation | Triode |\n| **III** | $\\approx V_{DD}/2$ (Switching Point) | Steep drop ($V_{\\text{in}} - V_{TH1} < V_{\\text{out}} < V_{\\text{in}} + |V_{TH2}|$) | **Saturation** | **Saturation** |\n| **IV** | Approaching $V_{DD} - |V_{TH2}|$ | Approaches $0\\text{ V}$ | Triode | Saturation |\n| **V** | $V_{\\text{in}} > V_{DD} - |V_{TH2}|$ | $0\\text{ V}$ (Logic 0) | Triode (ON) | Cutoff (OFF) |\n\n---\n\n### 3. Digital Perspective: The CMOS Logic Inverter\nIn digital systems, this circuit performs the logical **NOT** (inversion) operation:\n* **Logic $0$ in ($0\\text{ V}$) $\\rightarrow$ Logic $1$ out ($V_{DD}$)**\n* **Logic $1$ in ($V_{DD}$) $\\rightarrow$ Logic $0$ out ($0\\text{ V}$)**\n\n**Key Digital Advantages:**\n1. **Zero Static Power Dissipation:** In steady logic states (Region I or Region V), one transistor is always completely OFF. There is no direct path from $V_{DD}$ to ground, meaning static current $I_{DD} = 0$. Power is only consumed dynamically during switching transitions.\n2. **Rail-to-Rail Output Swing:** The output swings fully from $0\\text{ V}$ to $V_{DD}$, providing wide noise margins.\n3. **Infinite Input Impedance:** At DC, the gate oxide draws no current, allowing one gate to drive many subsequent stages (high fan-out).\n\n---\n\n### 4. Analog Perspective: Push-Pull Common-Source Amplifier\nIf the circuit is biased strictly in **Region III** (where both $M_1$ and $M_2$ are in saturation), it operates as an analog amplifier. Because both gates are driven by $V_{\\text{in}}$, both transistors act as active amplifying devices simultaneously (a technique known as **current reuse**).\n\n#### Small-Signal Parameters:\n1. **Effective Transconductance ($G_m$):**\n   A small positive change $\\Delta V_{\\text{in}}$ increases the current pulled down by $M_1$ by $g_{m1}\\Delta V_{\\text{in}}$ and simultaneously decreases the current pushed down by $M_2$ by $g_{m2}\\Delta V_{\\text{in}}$. In the small-signal model, the two transistors appear in parallel:\n   $$G_m = g_{m1} + g_{m2}$$\n\n2. **Output Resistance ($R_{\\text{out}}$):**\n   With the input held at AC ground ($v_{\\text{in}} = 0$), the output resistance is simply the parallel combination of the channel-length modulation resistances of both transistors:\n   $$R_{\\text{out}} = r_{o1} \\parallel r_{o2} = \\frac{r_{o1} r_{o2}}{r_{o1} + r_{o2}}$$\n\n3. **Small-Signal Voltage Gain ($A_v$):**\n   Combining the transconductance and output resistance yields the intrinsic voltage gain:\n   $$A_v = -G_m R_{\\text{out}} = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$$\n\n4. **Input Resistance ($R_{\\text{in}}$):**\n   Looking into the insulated gates of the MOSFETs, the low-frequency input resistance is ideal:\n   $$R_{\\text{in}} = \\infty$$",
        "format": "markdown",
        "sha256": "8f2918e2bb600876c000944b33b1bfbbe16a0c2d71bd45958f75485b75e78985"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter with an NMOS pull-down and PMOS pull-up, and gives the correct inversion, static logic-level behavior, and negative small-signal gain. The golden solution's full-credit rule applies; added analysis does not contradict the inverter's operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4111,
        "total_tokens": 5254,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2052,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4111,
        "total_tokens": 5254,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2052,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete large-signal (DC) and small-signal analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Overview\nThe circuit consists of two **NMOS transistors ($M_1$ and $M_2$)** stacked in series between the supply voltage $V_{DD}$ and ground:\n* **$M_1$ (Top NMOS):** Connected in a **common-drain (source-follower)** configuration. Its drain is tied to $V_{DD}$, its gate is driven by $V_{\\text{in}}$, and its source is connected to the output node $V_{\\text{out}}$.\n* **$M_2$ (Bottom NMOS):** Connected in a **common-source** configuration. Its drain is connected to $V_{\\text{out}}$, its gate is driven by $V_{\\text{in}}$, and its source is grounded.\n\nBecause both gates are tied together to $V_{\\text{in}}$, $M_1$ attempts to pull $V_{\\text{out}}$ **up** (like a source follower), while $M_2$ simultaneously attempts to pull $V_{\\text{out}}$ **down** to ground.\n\n---\n\n### 2. Large-Signal (DC) Analysis ($0 \\le V_{\\text{in}} \\le V_{DD}$)\n\nAssume initially that both transistors have the same threshold voltage $V_{TH}$ (neglecting the body effect and channel-length modulation).\n\n#### **Region I: $V_{\\text{in}} < V_{TH}$ (Both Transistors OFF)**\n* For $M_2$: $V_{GS2} = V_{\\text{in}} < V_{TH}$, so **$M_2$ is in cutoff (OFF)**.\n* For $M_1$: Since $V_{\\text{out}} \\ge 0$, $V_{GS1} = V_{\\text{in}} - V_{\\text{out}} < V_{TH}$, so **$M_1$ is also in cutoff (OFF)**.\n* **Result:** No current flows, and $V_{\\text{out}}$ is in a high-impedance (floating) state (remaining at $0\\text{ V}$ if initialized at zero).\n\n---\n\n#### **Region II: $V_{\\text{in}} > V_{TH}$ (Both Transistors ON)**\nOnce $V_{\\text{in}}$ exceeds $V_{TH}$, $M_2$ turns ON and pulls $V_{\\text{out}}$ toward ground, which simultaneously ensures $V_{GS1} = V_{\\text{in}} - V_{\\text{out}} > V_{TH}$, turning $M_1$ ON as well. Both transistors conduct the same drain current ($I_{D1} = I_{D2} > 0$).\n\nLet’s determine the operating mode of each transistor:\n1. **State of $M_1$ (Saturation):** \n   Since $V_{\\text{in}} \\le V_{DD}$, the gate-to-drain voltage of $M_1$ is $V_{GD1} = V_{\\text{in}} - V_{DD} \\le 0 < V_{TH}$. Equivalently, $V_{DS1} = V_{DD} - V_{\\text{out}} > V_{GS1} - V_{TH}$. Thus, **$M_1$ is always in the Saturation region**.\n\n2. **State of $M_2$ (Triode / Linear):** \n   For $M_1$ to stay ON and supply current to $M_2$, we must have $V_{GS1} > V_{TH}$, which means:\n   $$V_{\\text{in}} - V_{\\text{out}} > V_{TH} \\implies V_{\\text{out}} < V_{\\text{in}} - V_{TH}$$\n   Since $V_{DS2} = V_{\\text{out}}$ and $V_{GS2} = V_{\\text{in}}$, this directly means:\n   $$V_{DS2} < V_{GS2} - V_{TH}$$\n   Therefore, **$M_2$ is guaranteed to operate in the Triode (Linear) region** for the entire active range!\n\n---\n\n### 3. Derivation of $V_{\\text{out}}$ as a Function of $V_{\\text{in}}$\n\nFor $V_{\\text{in}} > V_{TH}$, we equate the saturation current of $M_1$ to the triode current of $M_2$ ($I_{D1} = I_{D2}$):\n\n$$\\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{\\text{out}} - V_{TH})^2 = \\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 \\left[ 2(V_{\\text{in}} - V_{TH})V_{\\text{out}} - V_{\\text{out}}^2 \\right]$$\n\nLet $k = \\dfrac{(W/L)_1}{(W/L)_2}$ and define the overdrive voltage $V_{OV} = V_{\\text{in}} - V_{TH}$:\n\n$$k(V_{OV} - V_{\\text{out}})^2 = 2V_{OV}V_{\\text{out}} - V_{\\text{out}}^2$$\n\nExpanding and grouping terms in powers of $V_{\\text{out}}$:\n\n$$(k + 1)V_{\\text{out}}^2 - 2(k + 1)V_{OV}V_{\\text{out}} + k V_{OV}^2 = 0$$\n\nDividing through by $(k + 1)$:\n\n$$V_{\\text{out}}^2 - 2V_{OV}V_{\\text{out}} + \\left(\\frac{k}{k+1}\\right)V_{OV}^2 = 0$$\n\nSolving this quadratic equation for $V_{\\text{out}}$ (and choosing the root that satisfies $V_{\\text{out}} < V_{OV}$):\n\n$$\\mathbf{V_{\\text{out}} = \\left( 1 - \\frac{1}{\\sqrt{1 + \\frac{(W/L)_1}{(W/L)_2}}} \\right) (V_{\\text{in}} - V_{TH})}$$\n\n#### **Key Takeaway from the DC Equation:**\n* **Linearity:** Neglecting the body effect, $V_{\\text{out}}$ increases **linearly** with $V_{\\text{in}}$ once $V_{\\text{in}} > V_{TH}$.\n* **Special Case (Identical Transistors):** If $\\left(\\frac{W}{L}\\right)_1 = \\left(\\frac{W}{L}\\right)_2$ ($k = 1$):\n  $$V_{\\text{out}} = \\left(1 - \\frac{1}{\\sqrt{2}}\\right)(V_{\\text{in}} - V_{TH}) \\approx 0.293(V_{\\text{in}} - V_{TH})$$\n\n---\n\n### 4. Small-Signal Analysis\n\n#### **Method 1: Direct Differentiation (Ideal Case)**\nDifferentiating the large-signal equation with respect to $V_{\\text{in}}$ directly gives the small-signal voltage gain $A_v$:\n\n$$A_v = \\frac{\\partial V_{\\text{out}}}{\\partial V_{\\text{in}}} = 1 - \\frac{1}{\\sqrt{1 + \\frac{(W/L)_1}{(W/L)_2}}}$$\n\nNotice that the gain is strictly positive and less than $1$ ($0 < A_v < 1$), meaning the circuit behaves as a **non-inverting voltage attenuator** once turned on.\n\n#### **Method 2: Small-Signal Equivalent Circuit Model**\nIncluding body effect ($g_{mb1}$) and channel-length modulation / drain-source resistance ($r_{o1}, r_{o2}$):\n* The small-signal drain current of $M_1$ is:\n  $$i_{d1} = g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - g_{mb1}v_{\\text{out}} - \\frac{v_{\\text{out}}}{r_{o1}}$$\n* The small-signal drain current of $M_2$ (operating in triode with drain-source resistance $r_{ds2}$) is:\n  $$i_{d2} = g_{m2}v_{\\text{in}} + \\frac{v_{\\text{out}}}{r_{ds2}}$$\n\nApplying KCL at the output node ($i_{d1} = i_{d2}$):\n\n$$(g_{m1} - g_{m2})v_{\\text{in}} = \\left(g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{ds2}}\\right)v_{\\text{out}}$$\n\n$$\\mathbf{A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{ds2}}}}$$\n\n* **Output Impedance ($R_{\\text{out}}$):**\n  Looking into the $V_{\\text{out}}$ terminal with $v_{\\text{in}} = 0$:\n  $$\\mathbf{R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{ds2}}$$\n\n---\n\n### 5. Impact of the Body Effect\nIf the bulk (substrate) of both transistors is tied to ground:\n* $M_2$ has $V_{SB2} = 0$, so $V_{TH2} = V_{TH0}$.\n* $M_1$ has $V_{SB1} = V_{\\text{out}} > 0$, so its threshold voltage increases as $V_{\\text{out}}$ rises:\n  $$V_{TH1} = V_{TH0} + \\gamma\\left(\\sqrt{|2\\phi_F + V_{\\text{out}}|} - \\sqrt{|2\\phi_F|}\\right)$$\n* This strengthens $M_2$ relative to $M_1$, resulting in a slightly lower $V_{\\text{out}}$ and introducing a slight downward curvature (nonlinearity) in the $V_{\\text{out}}$ vs. $V_{\\text{in}}$ characteristic.",
        "format": "markdown",
        "sha256": "70733b4d260442248ecaf62a2272544ed500a5d383bb77e7ff25738389c3a506"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper source-follower pull-up and lower pull-down, and concludes the circuit is a non-inverting attenuator rather than a normal CMOS inverter. The optional analysis supports that conclusion.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 5201,
        "total_tokens": 6334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2890,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 5201,
        "total_tokens": 6334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2890,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete large-signal (DC) and small-signal (AC) analysis of the given circuit.\n\n---\n\n### 1. Circuit Identification and Topology\nThe circuit consists of **two NMOS transistors** ($M_1$ and $M_2$) stacked in series between $V_{DD}$ and ground:\n* **Transistor $M_1$ (Top NMOS):**\n  * Drain: $V_{DD}$\n  * Gate: $V_{in}$\n  * Source: $V_{out}$ (acts as a source follower / pull-up device)\n* **Transistor $M_2$ (Bottom NMOS):**\n  * Drain: $V_{out}$\n  * Gate: $V_{in}$\n  * Source: Ground ($0\\text{ V}$)\n\n*(Note: Unlike a standard CMOS inverter where the top device is a PMOS, both devices here are NMOS).*\n\n---\n\n### 2. Operating Regions (Large-Signal Analysis)\n\nLet us sweep the input voltage $V_{in}$ from $0\\text{ V}$ to $V_{DD}$. For simplicity, assume initially that both transistors have the same threshold voltage $V_{TH}$ (neglecting the body effect) and neglect channel-length modulation ($\\lambda = 0$).\n\n#### **Region I: $V_{in} < V_{TH}$ (Cutoff)**\n* For $M_2$: $V_{GS2} = V_{in} < V_{TH}$, so **$M_2$ is OFF (cutoff)**.\n* For $M_1$: $V_{GS1} = V_{in} - V_{out}$. Since $V_{out} \\ge 0$, $V_{GS1} \\le V_{in} < V_{TH}$, so **$M_1$ is also OFF (cutoff)**.\n* **Result:** No current flows ($I_{D1} = I_{D2} = 0$), and the output node $V_{out}$ is in a high-impedance (floating) state.\n\n---\n\n#### **Region II: $V_{in} > V_{TH}$ (Active Operation)**\nAs $V_{in}$ exceeds $V_{TH}$, $M_2$ turns ON and pulls $V_{out}$ toward ground, which simultaneously increases $V_{GS1} = V_{in} - V_{out}$ and turns $M_1$ ON. Because the two transistors are in series, they must carry the same drain current ($I_{D1} = I_{D2} > 0$).\n\nLet us find the operating mode of each transistor:\n\n1. **State of $M_1$ (Saturation):**\n   The condition for $M_1$ to be in saturation is:\n   $$V_{DS1} \\ge V_{GS1} - V_{TH}$$\n   $$V_{DD} - V_{out} \\ge V_{in} - V_{out} - V_{TH} \\implies V_{in} \\le V_{DD} + V_{TH}$$\n   Since $V_{in}$ Normally stays within the supply rail ($V_{in} \\le V_{DD}$), **$M_1$ is always in saturation** once turned on.\n\n2. **State of $M_2$ (Triode / Linear Region):**\n   Since $M_1$ is ON and conducting current, its gate-source voltage must exceed $V_{TH}$:\n   $$V_{GS1} = V_{in} - V_{out} > V_{TH} \\implies V_{out} < V_{in} - V_{TH}$$\n   Now look at $M_2$: its drain-source voltage is $V_{DS2} = V_{out}$, and its overdrive voltage is $V_{GS2} - V_{TH} = V_{in} - V_{TH}$. From the inequality above:\n   $$V_{DS2} < V_{GS2} - V_{TH}$$\n   Therefore, **$M_2$ can never enter saturation; it always operates in the triode (linear) region** for $V_{in} > V_{TH}$.\n\n---\n\n### 3. Input-Output Transfer Characteristic ($V_{out}$ vs. $V_{in}$)\n\nTo find the exact relationship between $V_{out}$ and $V_{in}$ for $V_{in} > V_{TH}$, we equate the saturation current of $M_1$ to the triode current of $M_2$:\n\n$$I_{D1\\text{ (sat)}} = I_{D2\\text{ (triode)}}$$\n\n$$\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{in} - V_{out} - V_{TH})^2 = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 \\left[ 2(V_{in} - V_{TH})V_{out} - V_{out}^2 \\right]$$\n\n#### **Algebraic Simplification:**\nLet $X = V_{in} - V_{TH}$. Notice that the bracketed term on the right-hand side can be rewritten as:\n$$2XV_{out} - V_{out}^2 = X^2 - (X - V_{out})^2$$\n\nSubstituting this into the current equation gives:\n$$\\left(\\frac{W}{L}\\right)_1 (X - V_{out})^2 = \\left(\\frac{W}{L}\\right)_2 \\left[ X^2 - (X - V_{out})^2 \\right]$$\n\nGrouping the $(X - V_{out})^2$ terms together:\n$$\\left[ \\left(\\frac{W}{L}\\right)_1 + \\left(\\frac{W}{L}\\right)_2 \\right] (X - V_{out})^2 = \\left(\\frac{W}{L}\\right)_2 X^2$$\n\nTaking the square root on both sides (since $X - V_{out} = V_{GS1} - V_{TH} > 0$):\n$$X - V_{out} = X \\sqrt{\\frac{(W/L)_2}{(W/L)_1 + (W/L)_2}}$$\n\nSolving for $V_{out}$ and substituting $X = V_{in} - V_{TH}$ back in:\n\n$$\\mathbf{V_{out} = \\left( 1 - \\sqrt{\\frac{(W/L)_2}{(W/L)_1 + (W/L)_2}} \\right) (V_{in} - V_{TH})}$$\n\n#### **Key Takeaways from the Transfer Equation:**\n* **Linearity:** Neglecting the body effect and channel-length modulation, $V_{out}$ increases **strictly linearly** with $V_{in}$ for $V_{in} > V_{TH}$.\n* **Equal-Sized Transistors:** If $(W/L)_1 = (W/L)_2$, the equation simplifies to:\n  $$V_{out} = \\left(1 - \\frac{1}{\\sqrt{2}}\\right)(V_{in} - V_{TH}) \\approx 0.293(V_{in} - V_{TH})$$\n\n---\n\n### 4. Small-Signal Analysis\n\n#### **A. Voltage Gain ($A_v$)**\nWe can find the small-signal voltage gain $A_v = \\frac{\\partial V_{out}}{\\partial V_{in}}$ directly by differentiating the large-signal input-output equation with respect to $V_{in}$:\n\n$$A_v = \\frac{\\partial V_{out}}{\\partial V_{in}} = 1 - \\sqrt{\\frac{(W/L)_2}{(W/L)_1 + (W/L)_2}}$$\n\n*(Notice that the gain is positive, constant, and always less than $1$, meaning the circuit acts as an **attenuating non-inverting buffer / level shifter**).*\n\nAlternatively, in terms of small-signal parameters:\n* $M_1$ (Saturation): $g_{m1} = \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{in} - V_{out} - V_{TH})$\n* $M_2$ (Triode): \n  * $g_{m2} = \\frac{\\partial I_{D2}}{\\partial V_{GS2}} = \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 V_{out}$\n  * $g_{ds2} = \\frac{1}{r_{o2}} = \\frac{\\partial I_{D2}}{\\partial V_{DS2}} = \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{in} - V_{TH} - V_{out})$\n\nApplying KCL at the output node ($i_{d1} = i_{d2}$):\n$$g_{m1}(v_{in} - v_{out}) = g_{m2}v_{in} + g_{ds2}v_{out} \\implies \\mathbf{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{ds2}}}$$\n\n#### **B. Input and Output Impedance**\n* **Input Resistance ($R_{in}$):** Since the input drives only the insulated gates of $M_1$ and $M_2$, at low frequencies:\n  $$R_{in} = \\infty$$\n* **Output Resistance ($R_{out}$):** Setting $v_{in} = 0$, we look into the source of $M_1$ (resistance $\\frac{1}{g_{m1}} \\parallel r_{o1}$) in parallel with the drain of $M_2$ (resistance $r_{o2} = \\frac{1}{g_{ds2}}$):\n  $$R_{out} = \\frac{1}{g_{m1} + g_{mb1} + g_{ds1} + g_{ds2}} \\approx \\frac{1}{g_{m1} + g_{ds2}}$$\n\n---\n\n### 5. Impact of the Body Effect (Second-Order Effect)\nIn a standard CMOS process where the bodies of both NMOS transistors are tied to ground:\n* $M_2$ has $V_{SB2} = 0$, so $V_{TH2} = V_{TH0}$.\n* $M_1$ has $V_{SB1} = V_{out} > 0$, so its threshold voltage increases with $V_{out}$:\n  $$V_{TH1} = V_{TH0} + \\gamma \\left(\\sqrt{|2\\phi_F + V_{out}|} - \\sqrt{|2\\phi_F|}\\right)$$\n* Because $V_{TH1} > V_{TH2}$, $V_{out}$ is pushed even lower, ensuring even more strongly that $M_2$ remains in the triode region ($V_{out} < V_{in} - V_{TH1} < V_{in} - V_{TH2}$), and introducing slight nonlinearity (gain reduction via $g_{mb1}$) into the $V_{out}$ vs. $V_{in}$ curve.",
        "format": "markdown",
        "sha256": "6e5327009b41d769fb69bff9532acd41e5b84b7feb1c67007a8325ab0b8c2b62"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes M1 as a source-follower pull-up and M2 as a pull-down, and concludes the circuit is a non-inverting attenuator rather than a normal CMOS inverter. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 5808,
        "total_tokens": 6941,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3340,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 5808,
        "total_tokens": 6941,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3340,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete large-signal (DC) and small-signal (AC) analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Identification & Overview\nThe circuit consists of two **NMOS** transistors, $M_1$ and $M_2$, stacked in series between $V_{DD}$ and ground:\n* **Input ($V_{\\text{in}}$):** Connected to the gates of both $M_1$ and $M_2$.\n* **Output ($V_{\\text{out}}$):** Taken at the source of $M_1$ and the drain of $M_2$.\n\n*(Note: Although it superficially resembles a CMOS inverter, **both** devices are NMOS transistors. In analog IC design, this structure is also known as a **composite transistor** or **self-cascode**).*\n\n---\n\n### 2. Operating Regions (Qualitative Analysis)\n\nAssume both transistors have the same threshold voltage $V_{TH}$ (neglecting the body effect initially) and channel-length modulation is negligible ($\\lambda = 0$).\n\n#### **Case 1: $V_{\\text{in}} < V_{TH}$ (Cutoff)**\n* For $M_2$: $V_{GS2} = V_{\\text{in}} < V_{TH}$, so **$M_2$ is OFF**.\n* For $M_1$: $V_{GS1} = V_{\\text{in}} - V_{\\text{out}}$. Since $V_{\\text{in}} < V_{TH}$ and $V_{\\text{out}} \\ge 0$, $V_{GS1} < V_{TH}$, so **$M_1$ is also OFF**.\n* No current flows in the circuit, and $V_{\\text{out}} = 0\\text{ V}$ (assuming any initial charge discharges to ground).\n\n#### **Case 2: $V_{\\text{in}} > V_{TH}$ (Active Operation)**\n* Since $V_{GS2} = V_{\\text{in}} > V_{TH}$, **$M_2$ is ON**.\n* Because $M_1$ and $M_2$ are in series with no external load current ($I_{D1} = I_{D2}$), **$M_1$ must also be ON** to supply the current demanded by $M_2$.\n* For $M_1$ to remain ON, we must have:\n  $$V_{GS1} = V_{\\text{in}} - V_{\\text{out}} > V_{TH} \\implies V_{\\text{out}} < V_{\\text{in}} - V_{TH}$$\n\nNow let us determine the operating region (Saturation vs. Triode) for each transistor:\n1. **Region of $M_1$:** \n   The drain of $M_1$ is tied to $V_{DD}$. As long as $V_{\\text{in}} \\le V_{DD} + V_{TH}$, the gate-drain voltage is $V_{GD1} = V_{\\text{in}} - V_{DD} \\le V_{TH}$. Therefore, **$M_1$ is always in Saturation**.\n\n2. **Region of $M_2$:** \n   For $M_2$ to be in saturation, it requires $V_{DS2} \\ge V_{GS2} - V_{TH}$, which means:\n   $$V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH}$$\n   However, we already established that for $M_1$ to be ON, **$V_{\\text{out}}$ must be strictly less than $V_{\\text{in}} - V_{TH}$**. \n   Therefore, **$M_2$ cannot be in saturation; $M_2$ is forced to operate in the Triode (Linear) region.**\n\n---\n\n### 3. Large-Signal (DC) Analysis\n\nFor $V_{\\text{in}} > V_{TH}$, we equate the saturation current of $M_1$ to the triode current of $M_2$ ($I_{D1} = I_{D2}$):\n\n$$\\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{\\text{out}} - V_{TH})^2 = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 \\left[ (V_{\\text{in}} - V_{TH})V_{\\text{out}} - \\frac{1}{2}V_{\\text{out}}^2 \\right]$$\n\nLet $k = \\frac{(W/L)_1}{(W/L)_2}$ be the aspect ratio factor, and let $V_{OV} = V_{\\text{in}} - V_{TH}$. The equation simplifies to:\n\n$$k(V_{OV} - V_{\\text{out}})^2 = 2V_{OV}V_{\\text{out}} - V_{\\text{out}}^2$$\n\nExpanding and grouping terms in powers of $V_{\\text{out}}$:\n\n$$(k + 1)V_{\\text{out}}^2 - 2(k + 1)V_{OV}V_{\\text{out}} + k V_{OV}^2 = 0$$\n\nDividing through by $(k + 1)$:\n\n$$V_{\\text{out}}^2 - 2V_{OV}V_{\\text{out}} + \\left(\\frac{k}{k+1}\\right)V_{OV}^2 = 0$$\n\nSolving this quadratic equation for $V_{\\text{out}}$:\n\n$$V_{\\text{out}} = V_{OV} \\left( 1 \\pm \\sqrt{1 - \\frac{k}{k+1}} \\right) = (V_{\\text{in}} - V_{TH}) \\left( 1 \\pm \\frac{1}{\\sqrt{k+1}} \\right)$$\n\nSince $V_{\\text{out}} < V_{\\text{in}} - V_{TH}$ is required for $M_1$ to stay ON, only the minus sign is physically valid:\n\n$$\\boxed{V_{\\text{out}} = \\left( 1 - \\frac{1}{\\sqrt{1 + \\frac{(W/L)_1}{(W/L)_2}}} \\right) (V_{\\text{in}} - V_{TH})}$$\n\n#### **Key Takeaway:**\n* If both transistors have identical dimensions $\\left(\\frac{W}{L}\\right)_1 = \\left(\\frac{W}{L}\\right)_2$ ($k = 1$):\n  $$V_{\\text{out}} = \\left(1 - \\frac{1}{\\sqrt{2}}\\right)(V_{\\text{in}} - V_{TH}) \\approx 0.293(V_{\\text{in}} - V_{TH})$$\n* $V_{\\text{out}}$ increases **linearly** with $V_{\\text{in}}$ once $V_{\\text{in}} > V_{TH}$.\n\n---\n\n### 4. Small-Signal (AC) Analysis\n\n#### **Method 1: Direct Differentiation (Neglecting $\\lambda$ and Body Effect)**\nTaking the derivative of the large-signal transfer function with respect to $V_{\\text{in}}$ gives the small-signal voltage gain $A_v$:\n\n$$\\boxed{A_v = \\frac{\\partial V_{\\text{out}}}{\\partial V_{\\text{in}}} = 1 - \\frac{1}{\\sqrt{1 + \\frac{(W/L)_1}{(W/L)_2}}}}$$\n\nNotice that $0 < A_v < 1$. The circuit behaves as an attenuated source follower.\n\n#### **Method 2: Small-Signal Equivalent Model (General Form)**\nUsing small-signal parameters ($g_{m1}, g_{mb1}, r_{o1}$ for $M_1$, and $g_{m2}, r_{o2}$ for $M_2$):\n* Small-signal current from $M_1$: \n  $$i_{d1} = g_{m1}(v_{\\text{in}} - v_{\\text{out}}) - (g_{mb1} + g_{ds1})v_{\\text{out}}$$\n* Small-signal current into $M_2$: \n  $$i_{d2} = g_{m2}v_{\\text{in}} + g_{ds2}v_{\\text{out}}$$\n  *(where $g_{ds} = \\frac{1}{r_o}$ represents the output conductance of each device in its respective region).*\n\nEquating $i_{d1} = i_{d2}$ at the output node:\n\n$$g_{m1}v_{\\text{in}} - (g_{m1} + g_{mb1} + g_{ds1})v_{\\text{out}} = g_{m2}v_{\\text{in}} + g_{ds2}v_{\\text{out}}$$\n\nSolving for the small-signal voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n\n$$\\boxed{A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}}$$\n\n---\n\n### 5. Impact of Body Effect\nBecause the source of $M_1$ is connected to $V_{\\text{out}}$ rather than ground ($V_{SB1} = V_{\\text{out}} > 0$), $M_1$ experiences the **body effect**, which increases its threshold voltage $V_{TH1}$ as $V_{\\text{out}}$ rises:\n$$V_{TH1} = V_{TH0} + \\gamma \\left(\\sqrt{|2\\phi_F + V_{\\text{out}}|} - \\sqrt{|2\\phi_F|}\\right)$$\nThis strengthens the condition $V_{TH1} > V_{TH2}$, ensuring even more strongly that $M_2$ remains in the triode region, while slightly reducing the output voltage $V_{\\text{out}}$ and the small-signal gain $A_v$ (as reflected by the $g_{mb1}$ term in the denominator above).",
        "format": "markdown",
        "sha256": "ef97c418ead1d2062645bd94f7c39e132b55956af9ecb287fb3011a36823c26c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies both devices as NMOS, recognizes the upper source-follower and lower pull-down behavior, and concludes it is an attenuating source-follower structure rather than a normal CMOS inverter. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 5759,
        "total_tokens": 6892,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3498,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 5759,
        "total_tokens": 6892,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3498,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a classic **Common-Source (CS) amplifier with a diode-connected PMOS active load** (a standard topology found in analog CMOS integrated circuit design, such as in Behzad Razavi’s *Design of Analog CMOS Integrated Circuits*).\n\nHere is a complete large-signal (DC) and small-signal (AC) analysis of the circuit.\n\n---\n\n### 1. Component Identification\n* **$M_1$ (Bottom Transistor):** An **NMOS** transistor acting as the input transconductance (amplifying) device. Its source is grounded, its gate receives the input voltage $V_{\\text{in}}$, and its drain is connected to the output node $V_{\\text{out}}$.\n* **$M_2$ (Top Transistor):** A **PMOS** transistor configured as a **diode-connected load** (its gate and drain are tied together). Its source is connected to the positive supply $V_{DD}$.\n\n---\n\n### 2. Small-Signal (AC) Analysis\nAssume the circuit is biased such that both $M_1$ and $M_2$ operate in the **saturation region**.\n\n#### A. Input Resistance ($R_{\\text{in}}$)\nSince the input is applied directly to the insulated gate of $M_1$, the low-frequency small-signal input resistance is infinite:\n$$R_{\\text{in}} = \\infty$$\n\n#### B. Output Resistance ($R_{\\text{out}}$)\nTo find $R_{\\text{out}}$, we set the independent AC input source to zero ($V_{\\text{in}} = 0 \\implies v_{gs1} = 0$) and look into the $V_{\\text{out}}$ node:\n* Looking down into the drain of $M_1$: we see its output resistance, $r_{o1}$.\n* Looking up into the drain/gate of the diode-connected $M_2$: we see $\\frac{1}{g_{m2}} \\parallel r_{o2}$. \n*(Note: Because the source and N-well body of the PMOS are both tied to $V_{DD}$, $V_{SB2} = 0$, meaning **$M_2$ suffers from no body effect**, so $g_{mb2} = 0$).*\n\nCombining these parallel paths gives:\n$$R_{\\text{out}} = \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2}$$\n\nSince $\\frac{1}{g_{m2}} \\ll r_{o1}, r_{o2}$, the output resistance is dominated by the diode-connected load:\n$$R_{\\text{out}} \\approx \\frac{1}{g_{m2}}$$\n\n#### C. Small-Signal Voltage Gain ($A_v$)\nThe voltage gain of a common-source stage is given by $A_v = -G_m R_{\\text{out}}$, where $G_m = g_{m1}$:\n$$A_v = -g_{m1} \\left( \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2} \\right) \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\nUsing the square-law transconductance formula $g_m = \\sqrt{2 \\mu C_{\\text{ox}} \\frac{W}{L} I_D}$, and noting that both transistors share the same DC bias current ($I_{D1} = I_{D2}$), we can substitute $g_{m1}$ and $g_{m2}$:\n\n$$A_v \\approx -\\frac{\\sqrt{2 \\mu_n C_{\\text{ox}} (W/L)_1 I_D}}{\\sqrt{2 \\mu_p C_{\\text{ox}} (W/L)_2 I_D}} = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n---\n\n### 3. Large-Signal (DC) Analysis ($V_{\\text{out}}$ vs. $V_{\\text{in}}$)\n\nLet's trace how $V_{\\text{out}}$ changes as $V_{\\text{in}}$ sweeps from $0\\text{ V}$ to $V_{DD}$:\n\n1. **Cutoff Region ($V_{\\text{in}} < V_{TH1}$):**\n   * $M_1$ is OFF, so $I_{D1} = I_{D2} = 0$.\n   * $M_2$ conducts zero current, meaning its source-gate voltage is barely at its threshold voltage ($V_{SG2} \\approx |V_{TH2}|$).\n   * Therefore, the maximum output voltage is clipped at:\n     $$V_{\\text{out,max}} \\approx V_{DD} - |V_{TH2}|$$\n   *(Ignoring subthreshold conduction).*\n\n2. **Saturation Region ($V_{TH1} < V_{\\text{in}} < V_{\\text{out}} + V_{TH1}$):**\n   * $M_1$ turns ON in saturation. \n   * Because $M_2$ has its drain and gate tied together ($V_{SD2} = V_{SG2}$), the condition $V_{SD2} > V_{SG2} - |V_{TH2}|$ is always satisfied. Thus, **$M_2$ is always in saturation** whenever current flows.\n   * Neglecting channel-length modulation ($\\lambda = 0$), we equate the drain currents $I_{D1} = I_{D2}$:\n     $$\\frac{1}{2}\\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH1})^2 = \\frac{1}{2}\\mu_p C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{out}} - |V_{TH2}|)^2$$\n   * Taking the square root of both sides and solving for $V_{\\text{out}}$:\n     $$V_{\\text{out}} = V_{DD} - |V_{TH2}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} (V_{\\text{in}} - V_{TH1})$$\n   * **Key Insight:** Notice that $V_{\\text{out}}$ varies **linearly** with $V_{\\text{in}}$ in this region, and the slope $\\frac{\\partial V_{\\text{out}}}{\\partial V_{\\text{in}}}$ is identical to the small-signal gain $A_v$ derived earlier.\n\n3. **Triode Region ($V_{\\text{in}} > V_{\\text{out}} + V_{TH1}$):**\n   * As $V_{\\text{in}}$ increases further and $V_{\\text{out}}$ drops below $V_{\\text{in}} - V_{TH1}$, $M_1$ enters the **triode (linear) region**.\n   * The transconductance of $M_1$ decreases, causing the slope (gain) to flatten out as $V_{\\text{out}}$ approaches $0\\text{ V}$.\n\n---\n\n### 4. Summary of Design Characteristics\n\n* **High Linearity:** Because the gain expression is independent of the bias current $I_D$ (to a first order), the amplifier exhibits excellent large-signal linearity when both transistors are in saturation.\n* **No Body Effect:** Using a PMOS diode-connected load instead of an NMOS diode-connected load allows the source to be tied to $V_{DD}$, completely eliminating the body effect ($\\gamma = 0$).\n* **Low Gain:** Because the gain depends on the **square root** of the aspect ratio $\\frac{(W/L)_1}{(W/L)_2}$, achieving a high gain requires an impractically large transistor size ratio (e.g., a gain of $10$ requires a $\\mu_n(W/L)_1$ to $\\mu_p(W/L)_2$ ratio of $100$).\n* **Limited Output Swing:** The output voltage cannot swing all the way to $V_{DD}$; its upper limit is restricted to $V_{DD} - |V_{TH2}|$.",
        "format": "markdown",
        "sha256": "565f40c4493ec9f354f7d136a6c9471dd6494b8b9befcb4b621720cda28db6ad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both devices’ channel-length modulation included, as well as the equivalent approximation −gm1/gm2. The additional analysis is consistent with the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 4018,
        "total_tokens": 5151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 4018,
        "total_tokens": 5151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Common-Source (CS) amplifier with a diode-connected PMOS load**. \n\nHere is a complete breakdown of its operation, covering both large-signal (DC) and small-signal (AC) analyses, as well as its design trade-offs.\n\n---\n\n### 1. Component Roles\n* **$M_1$ (NMOS):** Acts as the main **transconductor (amplifying device)**. It converts the input voltage ($V_{\\text{in}}$) into a drain current.\n* **$M_2$ (PMOS):** Connected with its gate tied to its drain, functioning as a **diode-connected active load**. Because $V_{SD2} = V_{SG2}$, $M_2$ is always in **saturation** whenever it is conducting current ($V_{SG2} > |V_{TH2}|$).\n\n---\n\n### 2. Small-Signal (AC) Analysis\nAssuming both $M_1$ and $M_2$ are biased in the saturation region:\n\n#### **Input Impedance ($R_{\\text{in}}$)**\nLooking into the gate of $M_1$, the low-frequency input impedance is ideal:\n$$R_{\\text{in}} = \\infty$$\n\n#### **Output Impedance ($R_{\\text{out}}$)**\nLooking into the output node ($V_{\\text{out}}$), we see the drain of $M_1$ in parallel with the diode-connected drain/gate of $M_2$. \n*(Note: Because the source and bulk of the PMOS $M_2$ are both tied to $V_{DD}$, **$M_2$ does not suffer from the body effect**, meaning $g_{mb2} = 0$.)*\n\n$$R_{\\text{out}} = r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}}$$\n\nSince $\\frac{1}{g_{m2}} \\ll r_{o1}, r_{o2}$, this simplifies to a relatively low output resistance:\n$$R_{\\text{out}} \\approx \\frac{1}{g_{m2}}$$\n\n#### **Small-Signal Voltage Gain ($A_v$)**\nThe voltage gain of a common-source stage is given by $A_v = -g_{m1} R_{\\text{out}}$:\n$$A_v = -g_{m1} \\left( \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2} \\right) \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\nSubstituting the square-law transconductance equation $g_m = \\sqrt{2 \\mu C_{ox} \\frac{W}{L} I_D}$ and recognizing that both transistors share the exact same bias current ($I_{D1} = I_{D2}$):\n$$A_v \\approx -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\nAlternatively, expressing $g_m = \\frac{2I_D}{V_{OV}}$ (where $V_{OV} = |V_{GS} - V_{TH}|$ is the overdrive voltage):\n$$A_v \\approx -\\frac{V_{OV2}}{V_{OV1}} = -\\frac{V_{SG2} - |V_{TH2}|}{V_{GS1} - V_{TH1}}$$\n\n---\n\n### 3. Large-Signal (DC) Transfer Characteristic\nIf we sweep $V_{\\text{in}}$ from $0\\text{ V}$ to $V_{DD}$:\n\n1. **Cutoff Region ($V_{\\text{in}} < V_{TH1}$):**\n   * $M_1$ is OFF, so $I_{D1} = I_{D2} = 0$.\n   * $M_2$ barely turns off at the edge of threshold, pulling the output voltage up to:\n     $$V_{\\text{out(max)}} = V_{DD} - |V_{TH2}|$$\n\n2. **Saturation / Active Region ($V_{\\text{in}} > V_{TH1}$ and $V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH1}$):**\n   * Both $M_1$ and $M_2$ are in saturation. Neglecting channel-length modulation ($\\lambda = 0$), we equate their drain currents ($I_{D1} = I_{D2}$):\n     $$\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH1})^2 = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{out}} - |V_{TH2}|)^2$$\n   * Taking the square root of both sides yields a **strictly linear** large-signal equation:\n     $$V_{\\text{out}} = V_{DD} - |V_{TH2}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}(V_{\\text{in}} - V_{TH1})$$\n\n3. **Triode Region ($V_{\\text{out}} < V_{\\text{in}} - V_{TH1}$):**\n   * As $V_{\\text{in}}$ becomes very large and $V_{\\text{out}}$ drops low, $M_1$ enters the triode (linear) region. The slope (gain) flattens out as $V_{\\text{out}}$ asymptotically approaches a small minimum value near $0\\text{ V}$.\n\n---\n\n### 4. Key Advantages and Disadvantages\n\n#### **Advantages:**\n1. **High Linearity:** Because the small-signal gain equation depends only on device dimensions and mobility ratios (the bias current $I_D$ cancels out), the gain is largely independent of signal swing as long as both devices remain in saturation.\n2. **No Body Effect:** Unlike an NMOS diode-connected load, the PMOS load has its source connected to $V_{DD}$, eliminating the body-effect transconductance ($g_{mb2}=0$).\n3. **High Bandwidth:** The low output impedance ($\\approx 1/g_{m2}$) pushes the output pole to high frequencies, making it great for broadband/high-speed applications.\n4. **Stable DC Bias:** The diode-connected load naturally sets a well-defined DC output voltage without requiring complex biasing or Common-Mode Feedback (CMFB).\n\n#### **Disadvantages:**\n1. **Low Voltage Gain:** Because gain scales with the **square root** of the aspect ratio, achieving a moderate gain (e.g., $|A_v| = 10$) requires a massive size ratio between the devices (e.g., $\\frac{\\mu_n(W/L)_1}{\\mu_p(W/L)_2} = 100$), consuming large silicon area and adding large parasitic capacitances.\n2. **Gain vs. Headroom Trade-off:** From $A_v \\approx -\\frac{V_{OV2}}{V_{OV1}}$, increasing the gain requires increasing the overdrive voltage of $M_2$ ($V_{OV2}$). However, since $V_{\\text{out}} = V_{DD} - |V_{TH2}| - V_{OV2}$, a larger $V_{OV2}$ directly **reduces the available output voltage swing**.",
        "format": "markdown",
        "sha256": "227e02d46dad722d0b913a14b6e0ec01cdf0341842d45362eba0c4953b0712c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation treated consistently, matching the full-credit rule. The additional analysis does not undermine the essential result.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 3956,
        "total_tokens": 5089,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2315,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 3956,
        "total_tokens": 5089,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2315,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Common-Source (CS) Amplifier with a Diode-Connected PMOS Load** (a classic analog CMOS building block, famously illustrated in Behzad Razavi’s *Design of Analog CMOS Integrated Circuits*).\n\nHere is a complete large-signal and small-signal analysis of the circuit.\n\n---\n\n### 1. Component Identification\n* **$M_1$ (Input/Driver Transistor):** An **NMOS** transistor connected in a common-source configuration. Its gate is driven by the input voltage ($V_{\\text{in}}$), its source is tied to ground, and its drain forms the output node ($V_{\\text{out}}$).\n* **$M_2$ (Active Load):** A **PMOS** transistor with its source tied to the supply rail ($V_{DD}$) and its gate tied directly to its drain ($V_{\\text{out}}$). Because the gate and drain are shorted together ($V_{SG2} = V_{SD2}$), it is called a **diode-connected transistor**.\n  * *Key Property:* As long as $M_2$ is conducting ($V_{SG2} > |V_{THP}|$), the saturation condition ($V_{SD2} \\ge V_{SG2} - |V_{THP}|$) is **always satisfied**. Thus, $M_2$ always operates in the saturation region when ON.\n\n---\n\n### 2. Small-Signal (AC) Analysis\nAssuming the circuit is biased such that both $M_1$ and $M_2$ are operating in the **saturation region**:\n\n#### A. Input Impedance ($R_{\\text{in}}$)\nBecause the input signal is applied directly to the insulated gate of $M_1$, the low-frequency input impedance is infinite:\n$$R_{\\text{in}} = \\infty$$\n\n#### B. Output Impedance ($R_{\\text{out}}$)\nLooking into the drain of the diode-connected PMOS ($M_2$), the small-signal resistance is $\\frac{1}{g_{m2}} \\parallel r_{o2}$. (Note: Since the source and n-well bulk of $M_2$ are both tied to $V_{DD}$, $V_{SB2} = 0$, meaning **$M_2$ does not suffer from the body effect**, so $g_{mb2} = 0$).\n\nCombining the impedances connected to the $V_{\\text{out}}$ node:\n$$R_{\\text{out}} = r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}}$$\n\nSince $\\frac{1}{g_{m2}}$ is much smaller than the channel-length modulation resistances $r_{o1}$ and $r_{o2}$, this simplifies to:\n$$R_{\\text{out}} \\approx \\frac{1}{g_{m2}}$$\n\n#### C. Small-Signal Voltage Gain ($A_v$)\nThe voltage gain of a common-source stage is given by $A_v = -G_m R_{\\text{out}}$:\n$$A_v = -g_{m1} \\left( \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2} \\right) \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\nUsing the square-law transconductance formula $g_m = \\sqrt{2 \\mu C_{ox} \\frac{W}{L} I_D}$, and noting that both transistors share the exact same bias current ($I_{D1} = I_{D2}$), we can substitute $g_{m1}$ and $g_{m2}$:\n$$A_v \\approx -\\frac{\\sqrt{2 \\mu_n C_{ox} (W/L)_1 I_D}}{\\sqrt{2 \\mu_p C_{ox} (W/L)_2 I_D}} = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\nAlternatively, using $g_m = \\frac{2I_D}{V_{OV}}$ (where $V_{OV} = |V_{GS} - V_{TH}|$ is the overdrive voltage), the gain can be written in terms of DC voltage headroom:\n$$A_v \\approx -\\frac{V_{OV2}}{V_{OV1}} = -\\frac{V_{SG2} - |V_{THP}|}{V_{GS1} - V_{THN}}$$\n\n---\n\n### 3. Large-Signal (DC) Analysis\nWe can analyze how $V_{\\text{out}}$ behaves as $V_{\\text{in}}$ sweeps from $0\\text{ V}$ to $V_{DD}$:\n\n1. **Cutoff Region ($V_{\\text{in}} < V_{THN}$):**\n   * $M_1$ is OFF, so $I_{D1} = I_{D2} = 0$.\n   * $M_2$ pulls $V_{\\text{out}}$ up until the voltage across $M_2$ drops to its threshold voltage ($V_{SG2} = |V_{THP}|$), at which point $M_2$ shuts off (neglecting subthreshold leakage).\n   * Therefore, the maximum output voltage is clamped at:\n     $$V_{\\text{out,max}} = V_{DD} - |V_{THP}|$$\n\n2. **Saturation / Active Amplification Region ($V_{\\text{in}} > V_{THN}$ and $V_{\\text{out}} \\ge V_{\\text{in}} - V_{THN}$):**\n   * Both $M_1$ and $M_2$ are in saturation. Neglecting channel-length modulation ($\\lambda = 0$) and equating their drain currents ($I_{D1} = I_{D2}$):\n     $$\\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{THN})^2 = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{out}} - |V_{THP}|)^2$$\n   * Taking the square root of both sides and solving for $V_{\\text{out}}$ yields a **linear** large-signal transfer equation:\n     $$V_{\\text{out}} = V_{DD} - |V_{THP}| - \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} (V_{\\text{in}} - V_{THN})$$\n   * *(Notice that differentiating $V_{\\text{out}}$ with respect to $V_{\\text{in}}$ directly yields the small-signal gain derived earlier!)*\n\n3. **Triode Region ($V_{\\text{out}} < V_{\\text{in}} - V_{THN}$):**\n   * As $V_{\\text{in}}$ increases further, $V_{\\text{out}}$ drops below the overdrive voltage of $M_1$ ($V_{OV1}$), pushing $M_1$ into the triode (linear) region and causing the gain to drop sharply.\n\n---\n\n### 4. Output Voltage Swing\nTo keep both transistors in saturation for linear amplification, the output voltage must remain within the following bounds:\n* **Upper Limit:** $V_{\\text{out,max}} = V_{DD} - |V_{THP}|$\n* **Lower Limit:** $V_{\\text{out,min}} = V_{OV1} = V_{\\text{in}} - V_{THN}$\n\n---\n\n### 5. Summary of Advantages & Disadvantages\n\n| Advantages | Disadvantages |\n| :--- | :--- |\n| **High Linearity:** Because the gain is primarily determined by device geometry ratios rather than bias current $I_D$, the circuit exhibits very low distortion over a wide signal swing. | **Low Voltage Gain:** Achieving a high gain requires a huge aspect ratio difference $(W/L)_1 \\gg (W/L)_2$ because of the square-root dependence, which consumes large silicon area and increases parasitic capacitance. Typical gains are modest ($2$ to $10$). |\n| **No Body Effect Penalty:** Unlike an NMOS diode-connected load, the PMOS load has its source and bulk tied to $V_{DD}$, avoiding body-effect degradation ($\\gamma = 0$). | **Limited Voltage Headroom:** The output cannot swing all the way to $V_{DD}$; it loses at least one threshold voltage ($|V_{THP}|$) at the top rail. |\n| **Wide Bandwidth:** The relatively low output impedance ($\\approx 1/g_{m2}$) pushes the output pole to higher frequencies, making it suitable for high-speed broadband stages. | **Process Sensitivity:** Unlike an all-NMOS stage where mobility cancels out completely, the ratio $\\sqrt{\\mu_n/\\mu_p}$ still varies slightly with temperature and process corners. |",
        "format": "markdown",
        "sha256": "a27e93a8d86e3fc7fb05217c8af89d24332e57135118a6ad0908a2497a026c5a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including both output resistances consistently. The extra large-signal discussion is not required and does not undermine the essential analysis.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 4432,
        "total_tokens": 5565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2468,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 4432,
        "total_tokens": 5565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2468,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Common-Source (CS) amplifier stage with a diode-connected PMOS load** (a classic topology from Behzad Razavi’s *Design of Analog CMOS Integrated Circuits*).\n\nHere is a complete breakdown of the circuit, covering its topology, small-signal analysis, and large-signal behavior.\n\n---\n\n### 1. Component & Topology Identification\n\n* **Transistor $M_2$ (Input/Driver Device):**\n  * **Type:** PMOS (indicated by the arrow pointing *into* the channel at the upper source terminal).\n  * **Connections:** Source ($S_2$) is tied to $V_{DD}$ (AC ground), Gate ($G_2$) is connected to $V_{\\text{in}}$, and Drain ($D_2$) is connected to $V_{\\text{out}}$.\n  * **Role:** Acts as the common-source transconductance amplifier, converting changes in $V_{\\text{in}}$ into a drain current.\n\n* **Transistor $M_1$ (Load Device):**\n  * **Type:** PMOS.\n  * **Connections:** Source ($S_1$) is connected to $V_{\\text{out}}$, while both the Gate ($G_1$) and Drain ($D_1$) are tied to ground ($0\\text{ V}$).\n  * **Role:** Because $V_{G1} = V_{D1}$, $M_1$ is **diode-connected**. Whenever current flows through it ($V_{\\text{out}} > |V_{TH1}|$), it is guaranteed to operate in the **saturation region** because $V_{DS1} = V_{GS1}$, satisfying $|V_{DS1}| \\ge |V_{GS1}| - |V_{TH1}|$.\n\n---\n\n### 2. Small-Signal Analysis (Assuming $M_1$ and $M_2$ in Saturation)\n\n#### **A. Input Impedance ($R_{\\text{in}}$)**\nSince the input is applied purely to the insulated gate of $M_2$:\n$$R_{\\text{in}} = \\infty \\quad (\\text{at low frequencies})$$\n\n#### **B. Output Impedance ($R_{\\text{out}}$)**\nTo find $R_{\\text{out}}$, we set $V_{\\text{in}} = 0$ (small-signal ground) and look into the $V_{\\text{out}}$ node:\n* **Looking up into the drain of $M_2$:** We see the output resistance $r_{o2}$.\n* **Looking down into the source of $M_1$:** Because the source is connected to $V_{\\text{out}}$ and the gate/drain are grounded, the small-signal resistance looking into the source of a diode-connected MOSFET is:\n  $$R_{\\text{down}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1}$$\n\nCombining the upward and downward paths in parallel:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n*(Note: $g_{mb1}$ represents the body-effect transconductance of $M_1$. Since PMOS devices are fabricated inside an N-well, the body effect can be eliminated ($g_{mb1} = 0$) if $M_1$ is placed in its own isolated N-well tied directly to its source, $V_{\\text{out}}$. If the N-well is tied to $V_{DD}$, then $g_{mb1} \\neq 0$.)*\n\n#### **C. Small-Signal Voltage Gain ($A_v$)**\nUsing the standard amplifier gain formula $A_v = -G_m R_{\\text{out}}$, where $G_m = g_{m2}$:\n$$A_v = -g_{m2} \\left( \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\right)$$\n\nNeglecting channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$):\n$$A_v \\approx -\\frac{g_{m2}}{g_{m1} + g_{mb1}} = -\\frac{g_{m2}}{g_{m1}(1 + \\eta)}$$\nwhere $\\eta = \\frac{g_{mb1}}{g_{m1}}$.\n\nSubstituting the square-law equation $g_m = \\sqrt{2 \\mu_p C_{ox} (W/L) I_D}$ and noting that both transistors share the same bias current ($I_{D1} = I_{D2}$):\n$$A_v = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}} \\cdot \\frac{1}{1 + \\eta}$$\n\nIf the bulk of $M_1$ is tied to its source ($\\eta = 0$), the gain simplifies purely to a geometric ratio:\n$$A_v = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n---\n\n### 3. Large-Signal Analysis ($V_{\\text{out}}$ vs. $V_{\\text{in}}$)\n\nLet's trace the output voltage as $V_{\\text{in}}$ is swept from $V_{DD}$ down to $0\\text{ V}$:\n\n1. **Cutoff Region ($V_{\\text{in}} > V_{DD} - |V_{TH2}|$):**\n   * The source-gate voltage of $M_2$ is too small ($V_{SG2} < |V_{TH2}|$), so **$M_2$ is OFF**.\n   * No current flows ($I_D = 0$). $M_1$ pulls $V_{\\text{out}}$ down until $M_1$ barely turns off at the edge of conduction:\n     $$V_{\\text{out}} \\approx |V_{TH1}|$$\n\n2. **Saturation Region (Amplifier Operation):**\n   * As $V_{\\text{in}}$ drops below $V_{DD} - |V_{TH2}|$, $M_2$ turns ON in **saturation**, and $M_1$ is also in **saturation**.\n   * Equating their drain currents ($I_{D2} = I_{D1}$) and ignoring channel-length modulation ($\\lambda = 0$):\n     $$\\frac{1}{2}\\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{TH2}|)^2 = \\frac{1}{2}\\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{out}} - |V_{TH1}|)^2$$\n   * Taking the square root of both sides and solving for $V_{\\text{out}}$:\n     $$V_{\\text{out}} = \\sqrt{\\frac{(W/L)_2}{(W/L)_1}} (V_{DD} - V_{\\text{in}} - |V_{TH2}|) + |V_{TH1}|$$\n   * **Key Observation:** When both devices are in saturation, the relationship between $V_{\\text{out}}$ and $V_{\\text{in}}$ is **highly linear** (especially if $M_1$'s bulk is tied to its source so $|V_{TH1}|$ is constant).\n\n3. **Triode Region ($V_{\\text{out}} > V_{\\text{in}} + |V_{TH2}|$):**\n   * As $V_{\\text{in}}$ decreases further toward $0\\text{ V}$, $V_{\\text{out}}$ rises toward $V_{DD}$.\n   * Once $V_{\\text{out}}$ exceeds $V_{\\text{in}} + |V_{TH2}|$, the source-drain voltage across $M_2$ becomes smaller than its overdrive voltage ($V_{SD2} < V_{SG2} - |V_{TH2}|$).\n   * **$M_2$ enters the triode (linear) region**, causing the gain (slope of $V_{\\text{out}}$ vs. $V_{\\text{in}}$) to drop sharply.\n\n---\n\n### 4. Summary of Characteristics\n\n* **Pros:** \n  * Very linear amplification in the saturation region because the gain depends primarily on device dimension ratios rather than bias current.\n  * Can eliminate the body effect $(\\eta = 0)$ easily by placing $M_1$ in a separate N-well connected to $V_{\\text{out}}$.\n* **Cons:** \n  * Low voltage gain compared to current-source loads (usually limited to $|A_v| < 10$ to keep parasitics and device area reasonable).\n  * Output voltage swing is limited at the bottom to $V_{\\text{out,min}} = |V_{TH1}| + V_{OV1}$ because $M_1$ requires at least one threshold voltage drop across it to conduct.",
        "format": "markdown",
        "sha256": "48e1ec5c1cecad8c8e996a3076fcbb00c5c6b1a2a538ad13615db64aaf730b61"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain at ground. Its gain expression reduces to the required gm/gm result when body effect and finite output resistance are neglected; the additional analysis does not alter the essential interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4628,
        "total_tokens": 5742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2628,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4628,
        "total_tokens": 5742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2628,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **PMOS Common-Source (CS) amplifier with a diode-connected PMOS load**. \n\n---\n\n### 1. Component Identification & Roles\n\n* **$M_2$ (Input / Transconductance Device):** A PMOS transistor in a **common-source** configuration. Its source is tied to $V_{DD}$, the input voltage $V_{\\text{in}}$ is applied to its gate, and the output $V_{\\text{out}}$ is taken at its drain.\n* **$M_1$ (Active Load):** A PMOS transistor with both its gate and drain connected to ground. Because $V_{G1} = V_{D1} = 0$, it acts as a **diode-connected load** (or equivalently, has a small-signal resistance of approximately $1/g_{m1}$ looking into its source).\n\n---\n\n### 2. Small-Signal Analysis (Active Region)\n\nAssuming the circuit is biased such that both $M_1$ and $M_2$ operate in the **saturation region**:\n\n1. **Input Resistance ($R_{\\text{in}}$):**\n   Since the input goes directly into the insulated gate of $M_2$, at low frequencies:\n   $$R_{\\text{in}} = \\infty$$\n\n2. **Output Resistance ($R_{\\text{out}}$):**\n   Setting the small-signal input to zero ($v_{\\text{in}} = 0$):\n   * Looking **up** into the drain of $M_2$, we see its output resistance $r_{o2}$.\n   * Looking **down** into the source of $M_1$ (with its gate and drain grounded), we see $\\frac{1}{g_{m1}} \\parallel \\frac{1}{g_{mb1}} \\parallel r_{o1}$.\n\n   Combining these in parallel gives the total output resistance:\n   $$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n3. **Small-Signal Voltage Gain ($A_v$):**\n   The voltage gain is given by $A_v = -G_m R_{\\text{out}}$, where $G_m = g_{m2}$:\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m2} \\left( \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\right)$$\n\n   Neglecting channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$):\n   $$A_v \\approx -\\frac{g_{m2}}{g_{m1} + g_{mb1}} = -\\frac{g_{m2}}{g_{m1}(1 + \\eta_1)}$$\n   *(where $\\eta_1 = g_{mb1}/g_{m1}$ accounts for the body effect of $M_1$).*\n\n4. **Eliminating the Body Effect (Design Advantage):**\n   Because $M_1$ is a PMOS transistor, it can be placed in its own isolated **n-well** with its bulk (body) connected directly to its source ($V_{\\text{out}}$). In that case, $V_{SB1} = 0 \\implies g_{mb1} = 0$, and the gain simplifies to a purely geometric ratio:\n   $$A_v = -\\frac{g_{m2}}{g_{m1}} = -\\frac{\\sqrt{2\\mu_p C_{\\text{ox}} (W/L)_2 I_D}}{\\sqrt{2\\mu_p C_{\\text{ox}} (W/L)_1 I_D}} = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n---\n\n### 3. Large-Signal (DC) Operation & Transfer Characteristic\n\nNote that for $M_1$, since $V_{D1} = V_{G1} = 0$, the condition $V_{SD1} = V_{SG1} > V_{SG1} - |V_{TH1}|$ is always satisfied whenever $M_1$ is conducting. Therefore, **$M_1$ is always in saturation** when ON.\n\nAs $V_{\\text{in}}$ sweeps from $V_{DD}$ down to $0$:\n\n1. **Region I: $V_{\\text{in}} > V_{DD} - |V_{TH2}|$ ($M_2$ is OFF)**\n   * The source-gate voltage of $M_2$ ($V_{SG2} = V_{DD} - V_{\\text{in}}$) is less than $|V_{TH2}|$, so $M_2$ is in cutoff ($I_{D2} = 0$).\n   * $M_1$ pulls $V_{\\text{out}}$ down until $M_1$ barely turns off, clamping the minimum output voltage at:\n     $$V_{\\text{out, min}} = |V_{TH1}|$$\n\n2. **Region II: $V_{\\text{in}} < V_{DD} - |V_{TH2}|$ and $V_{\\text{out}} \\le V_{\\text{in}} + |V_{TH2}|$ (Both in Saturation)**\n   * $M_2$ turns ON in saturation. Equating the drain currents $I_{D1} = I_{D2}$ (neglecting channel-length modulation):\n     $$\\frac{1}{2}\\mu_p C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_1 \\left(V_{\\text{out}} - |V_{TH1}|\\right)^2 = \\frac{1}{2}\\mu_p C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_2 \\left(V_{DD} - V_{\\text{in}} - |V_{TH2}|\\right)^2$$\n   * Solving for $V_{\\text{out}}$ gives a linear relationship between $V_{\\text{out}}$ and $V_{\\text{in}}$:\n     $$V_{\\text{out}} = |V_{TH1}| + \\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\left(V_{DD} - V_{\\text{in}} - |V_{TH2}|\\right)$$\n\n3. **Region III: $V_{\\text{out}} > V_{\\text{in}} + |V_{TH2}|$ ($M_2$ in Triode, $M_1$ in Saturation)**\n   * As $V_{\\text{in}}$ decreases further, $V_{\\text{out}}$ rises until the drain-source voltage of $M_2$ drops below its overdrive voltage ($V_{SD2} < V_{SG2} - |V_{TH2}|$).\n   * At the boundary $V_{\\text{out}} = V_{\\text{in}} + |V_{TH2}|$, $M_2$ enters the **triode (linear) region**, causing the gain (slope) to decrease as $V_{\\text{in}}$ approaches $0\\text{ V}$.\n\n---\n\n### Summary of Key Characteristics\n* **High Linearity:** In the saturation region, the gain is relatively independent of the bias current $I_D$ because $g_{m1}$ and $g_{m2}$ both scale with $\\sqrt{I_D}$.\n* **Moderate Gain:** Because the load impedance is roughly $1/g_{m1}$ rather than $r_o$, the voltage gain is modest (typically $2\\text{--}10$) and well-controlled by transistor sizing $(W/L)$.\n* **Limited Output Swing:** The output voltage cannot swing all the way to ground because $M_1$ requires at least one threshold voltage drop ($V_{\\text{out}} \\ge |V_{TH1}|$) to conduct current.",
        "format": "markdown",
        "sha256": "c53f6d3bf23ab9851230456c0b420ad73b600ebedf19dc2ca55a4a438915d31b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain at ground. It gives the required gm/gm gain, Av ≈ −gm2/gm1, with body-effect and finite-output-resistance qualifications. The extra analysis does not overturn the essential interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 5129,
        "total_tokens": 6243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3368,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 5129,
        "total_tokens": 6243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3368,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **PMOS Common-Source (CS) amplifier stage with a diode-connected PMOS load** (a classic topology from Behzad Razavi’s *Design of Analog CMOS Integrated Circuits*).\n\nHere is a complete large-signal (DC) and small-signal (AC) analysis of the circuit.\n\n---\n\n### 1. Component Identification\nLooking at the source arrows pointing inward toward the gate:\n* **$\\boldsymbol{M_2}$ (Input/Amplifying Device):** A PMOS transistor in a **common-source** configuration.\n  * Source ($S_2$) = $V_{DD}$\n  * Gate ($G_2$) = $V_{\\text{in}}$\n  * Drain ($D_2$) = $V_{\\text{out}}$\n* **$\\boldsymbol{M_1}$ (Load Device):** A **diode-connected** PMOS transistor acting as an active load.\n  * Source ($S_1$) = $V_{\\text{out}}$\n  * Gate ($G_1$) = $\\text{GND}$ ($0\\text{ V}$)\n  * Drain ($D_1$) = $\\text{GND}$ ($0\\text{ V}$)\n\nBecause the gate and drain of $M_1$ are tied together ($V_{GD1} = 0$), the condition $V_{SD1} > V_{SG1} - |V_{TH1}|$ is always met whenever $M_1$ is conducting. Thus, **$M_1$ is always in saturation** when ON.\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nLet us trace $V_{\\text{out}}$ as $V_{\\text{in}}$ sweeps from $V_{DD}$ down to $0\\text{ V}$:\n\n#### **Region I: $M_2$ is Cutoff ($V_{\\text{in}} > V_{DD} - |V_{TH2}|$)**\n* When $V_{\\text{in}}$ is close to $V_{DD}$, the source-gate voltage of $M_2$ is too small to turn it on ($V_{SG2} = V_{DD} - V_{\\text{in}} < |V_{TH2}|$).\n* Therefore, $I_{D2} = I_{D1} = 0$.\n* As current drops to zero, $M_1$ sits at the edge of conduction where $V_{SG1} = V_{\\text{out}} = |V_{TH1}|$.\n* **Minimum Output Voltage:** \n  $$V_{\\text{out,min}} = |V_{TH1}|$$\n\n#### **Region II: Both $M_1$ and $M_2$ in Saturation**\n* As $V_{\\text{in}}$ drops below $V_{DD} - |V_{TH2}|$, $M_2$ turns ON in saturation.\n* Neglecting channel-length modulation ($\\lambda = 0$), we equate the drain currents $I_{D2} = I_{D1}$:\n  $$\\frac{1}{2}\\mu_p C_{\\text{ox}}\\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{\\text{in}} - |V_{TH2}|)^2 = \\frac{1}{2}\\mu_p C_{\\text{ox}}\\left(\\frac{W}{L}\\right)_1 (V_{\\text{out}} - |V_{TH1}|)^2$$\n* Taking the square root of both sides yields a **linear relationship** between $V_{\\text{out}}$ and $V_{\\text{in}}$:\n  $$V_{\\text{out}} = \\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\,(V_{DD} - V_{\\text{in}} - |V_{TH2}|) + |V_{TH1}|$$\n\n#### **Region III: $M_2$ Enters the Triode Region**\n* As $V_{\\text{in}}$ approaches $0\\text{ V}$, $V_{\\text{out}}$ rises. $M_2$ stays in saturation only as long as $V_{SD2} \\ge V_{SG2} - |V_{TH2}|$, which simplifies to:\n  $$V_{\\text{out}} \\le V_{\\text{in}} + |V_{TH2}|$$\n* Once $V_{\\text{out}} > V_{\\text{in}} + |V_{TH2}|$, $M_2$ enters the **triode (linear) region**, causing the slope (gain) to drop off as $V_{\\text{out}}$ approaches its maximum value near $V_{DD}$.\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\nAssuming both transistors are biased in the **saturation region**:\n\n#### **1. Input Resistance ($R_{\\text{in}}$)**\nSince the input is connected solely to the insulated gate of $M_2$:\n$$R_{\\text{in}} = \\infty \\quad (\\text{at low frequencies})$$\n\n#### **2. Output Resistance ($R_{\\text{out}}$)**\nLooking into the output node $V_{\\text{out}}$:\n* Looking *up* into the drain of $M_2$, we see its output resistance $r_{o2}$.\n* Looking *down* into the source of the diode-connected $M_1$, we see $\\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1}$.\n\nCombining these in parallel:\n$$R_{\\text{out}} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n\n#### **3. Small-Signal Voltage Gain ($A_v$)**\nThe voltage gain of a common-source stage is $A_v = -G_m R_{\\text{out}}$, where $G_m = g_{m2}$:\n$$A_v = -g_{m2} \\left( \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\right) \\approx -\\frac{g_{m2}}{g_{m1} + g_{mb1}} = -\\frac{g_{m2}}{g_{m1}(1 + \\eta)}$$\nwhere $\\eta = \\frac{g_{mb1}}{g_{m1}}$ represents the **body effect** of $M_1$.\n\nUsing the square-law expression $g_m = \\sqrt{2\\mu_p C_{\\text{ox}}(W/L)I_D}$ and recognizing that $I_{D1} = I_{D2}$:\n$$A_v \\approx -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}} \\cdot \\frac{1}{1 + \\eta}$$\n\n---\n\n### 4. Special Design Insight: Eliminating the Body Effect\nIn a standard CMOS process (p-substrate with n-wells for PMOS devices):\n* **$M_2$** has its source and bulk (n-well) tied to $V_{DD}$, so $V_{SB2} = 0$ (no body effect).\n* **$M_1$** has its source connected to $V_{\\text{out}}$. \n  * **Shared n-well:** If $M_1$'s bulk is tied to $V_{DD}$, then $V_{SB1} = V_{\\text{out}} - V_{DD} \\neq 0$, meaning $M_1$ suffers from body effect ($\\eta \\neq 0$), which reduces the gain and introduces slight nonlinearity.\n  * **Separate n-well:** Because $M_1$ is a PMOS device, it can be placed in its **own isolated n-well** tied directly to its source ($V_{\\text{out}}$). In that case, $V_{SB1} = 0 \\implies g_{mb1} = 0 \\implies \\eta = 0$, and the gain becomes purely a ratio of transistor dimensions:\n    $$A_v = -\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n---\n\n### Summary of Key Characteristics\n| Parameter | Expression / Behavior |\n| :--- | :--- |\n| **Topology** | Common-Source Amplifier with Diode-Connected Load |\n| **Voltage Gain ($A_v$)** | $-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}} \\frac{1}{1+\\eta}$ (Moderate gain, typically $2\\text{–}10$) |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\approx \\frac{1}{g_{m1} + g_{mb1}}$ (Relatively low) |\n| **Output Voltage Swing** | From $|V_{TH1}|$ up to $V_{\\text{in}} + |V_{TH2}|$ (Limited by $\\|V_{TH1}\\|$) |\n| **Main Advantage** | High linearity; gain is largely independent of bias current and process parameters ($\\mu_p, C_{\\text{ox}}$). |",
        "format": "markdown",
        "sha256": "8ddb5aaaba1e2843a535109d4308bc1d905f80d1230aaf15ff4ad810401ff5e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain at ground. It gives the required −gm2/gm1 gain when body effect is absent; the extra body-effect discussion does not replace the correct core interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4465,
        "total_tokens": 5579,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4465,
        "total_tokens": 5579,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit is a **PMOS cascode stage** (specifically, a cascode current source/load). \n\nHere is the step-by-step small-signal analysis to find the output resistance $R_{\\text{out}}$:\n\n---\n\n### **1. Intuitive / Block-Level Approach**\n\n1. **Resistance at Node $X$:**\n   For transistor $M_2$, both its source ($V_{DD}$) and gate ($V_{b2}$) are connected to constant DC voltages, which act as **AC ground** in small-signal analysis. \n   - Because $v_{gs2} = 0$, the dependent current source of $M_2$ is zero ($g_{m2}v_{gs2} = 0$).\n   - Therefore, looking up into the drain of $M_2$ from node $X$, we simply see its output resistance, $r_{o2}$, connected to AC ground:\n     $$R_X = r_{o2}$$\n\n2. **Looking into the Drain of $M_1$:**\n   Transistor $M_1$ has its gate connected to AC ground ($V_{b1}$) and its source degenerated by the resistance at node $X$ ($R_X = r_{o2}$). Using the standard formula for the output resistance of a source-degenerated MOSFET:\n\n   * **Ignoring body effect ($\\gamma = 0$):**\n     $$R_{\\text{out}} = \\left(1 + g_{m1} r_{o1}\\right) R_X + r_{o1}$$\n     $$\\mathbf{R_{\\text{out}} = \\left(1 + g_{m1} r_{o1}\\right) r_{o2} + r_{o1} = r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2}}$$\n\n   * **Approximation (since $g_{m1} r_{o1} \\gg 1$):**\n     $$\\mathbf{R_{\\text{out}} \\approx g_{m1} r_{o1} r_{o2}}$$\n\n---\n\n### **2. Formal Derivation (Using a Test Source)**\n\nIf you need to show the full KVL/KCL derivation using a small-signal test source $v_t$ applied at the output delivering a test current $i_t$ (such that $R_{\\text{out}} = \\frac{v_t}{i_t}$):\n\n1. **At Node $X$:**\n   All the test current $i_t$ entering the drain of $M_1$ must flow out of its source into node $X$, and then through $r_{o2}$ to ground:\n   $$v_X = i_t r_{o2}$$\n\n2. **Gate-to-Source Voltage of $M_1$:**\n   Since the gate of $M_1$ is at AC ground ($v_{g1} = 0$):\n   $$v_{gs1} = v_{g1} - v_X = -v_X = -i_t r_{o2}$$\n\n3. **Current Equation for $M_1$:**\n   By KCL at the drain of $M_1$, the total current $i_t$ flowing from drain to source is the sum of the current through $r_{o1}$ and the controlled current source $g_{m1}v_{gs1}$:\n   $$i_t = g_{m1} v_{gs1} + \\frac{v_t - v_X}{r_{o1}}$$\n\n4. **Solve for $\\frac{v_t}{i_t}$:**\n   Substitute $v_X = i_t r_{o2}$ and $v_{gs1} = -i_t r_{o2}$ into the equation:\n   $$i_t = -g_{m1} r_{o2} i_t + \\frac{v_t - i_t r_{o2}}{r_{o1}}$$\n\n   Multiply both sides by $r_{o1}$:\n   $$i_t r_{o1} = -g_{m1} r_{o1} r_{o2} i_t + v_t - i_t r_{o2}$$\n\n   Group all $i_t$ terms on the left side:\n   $$v_t = i_t \\left( r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2} \\right)$$\n\n   $$R_{\\text{out}} = \\frac{v_t}{i_t} = r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2}$$\n\n---\n\n### **Summary of Results**\n\n| Condition | Exact Expression | Common Approximation |\n| :--- | :--- | :--- |\n| **Without Body Effect** | $R_{\\text{out}} = \\left(1 + g_{m1}r_{o1}\\right)r_{o2} + r_{o1}$ | $R_{\\text{out}} \\approx g_{m1}r_{o1}r_{o2}$ |\n| **With Body Effect** | $R_{\\text{out}} = \\left[1 + \\left(g_{m1} + g_{mb1}\\right)r_{o1}\\right]r_{o2} + r_{o1}$ | $R_{\\text{out}} \\approx \\left(g_{m1} + g_{mb1}\\right)r_{o1}r_{o2}$ |",
        "format": "markdown",
        "sha256": "531d59d3db2611f8b5835c9631538417a0fbcb69511b954e815c58d5542d5fa5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the PMOS cascode device and gives the correct output-resistance expression and approximation; its body-effect expression is also correct.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 2275,
        "total_tokens": 3416,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1031,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 2275,
        "total_tokens": 3416,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1031,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{\\text{out}}$, we can perform a small-signal analysis on this **PMOS cascode** circuit.\n\n---\n\n### **Step 1: Set up the Small-Signal Conditions**\nFor small-signal (AC) analysis, all constant DC voltage sources ($V_{DD}$, $V_{b1}$, and $V_{b2}$) are set to **AC ground**.\n\n1. **Transistor $M_2$:**\n   * Its source is connected to $V_{DD}$ (AC ground).\n   * Its gate is connected to $V_{b2}$ (AC ground).\n   * Since $v_{gs2} = 0$, the dependent current source $g_{m2}v_{gs2}$ is zero (open circuit). \n   * Therefore, looking up into the drain of $M_2$ from node $X$, we simply see its output resistance $r_{o2}$ connected to ground:\n     $$R_X = r_{o2}$$\n\n2. **Transistor $M_1$:**\n   * Its gate is connected to $V_{b1}$ (AC ground).\n   * Its source is connected to node $X$, which has an equivalent resistance of $R_X = r_{o2}$ to ground.\n   * Thus, $M_1$ acts as a common-gate stage (or a transistor with source degeneration $R_S = r_{o2}$).\n\n---\n\n### **Step 2: Calculate $R_{\\text{out}}$**\n\nUsing the standard formula for the resistance looking into the drain of a MOSFET ($M_1$) with a resistor $R_X$ connected from its source to ground:\n\n#### **Case 1: Neglecting Body Effect ($g_{mb1} = 0$)**\n$$R_{\\text{out}} = r_{o1} + R_X + g_{m1} r_{o1} R_X$$\n\nSubstituting $R_X = r_{o2}$:\n$$\\mathbf{R_{\\text{out}} = r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2}} = (1 + g_{m1} r_{o2}) r_{o1} + r_{o2}$$\n\nSince $g_{m1} r_{o1} \\gg 1$ and $g_{m1} r_{o2} \\gg 1$, this is commonly approximated as:\n$$\\mathbf{R_{\\text{out}} \\approx g_{m1} r_{o1} r_{o2}}$$\n\n---\n\n#### **Case 2: Including Body Effect ($g_{mb1} \\neq 0$)**\nIf the body (bulk) of $M_1$ is tied to $V_{DD}$ rather than its own source, the body effect transconductance $g_{mb1}$ acts in parallel with $g_{m1}$:\n\n$$\\mathbf{R_{\\text{out}} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1}) r_{o1} r_{o2}} = [1 + (g_{m1} + g_{mb1}) r_{o1}] r_{o2} + r_{o1}$$\n\nAnd the standard approximation is:\n$$\\mathbf{R_{\\text{out}} \\approx (g_{m1} + g_{mb1}) r_{o1} r_{o2}}$$",
        "format": "markdown",
        "sha256": "e20d7ed57526787f52eb41d1a5d504a91d71812157541b881339350c35d2ca66"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the common-gate cascode device and gives the full output-resistance expression and valid approximation. Including body effect is also consistent with the solution.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 1803,
        "total_tokens": 2944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1038,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 1803,
        "total_tokens": 2944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1038,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the small-signal output resistance $R_{\\text{out}}$ of the given PMOS cascode circuit, we set all DC bias sources ($V_{DD}$, $V_{b1}$, and $V_{b2}$) to **AC ground**.\n\n---\n\n### **Method 1: By Inspection**\n\n1. **Resistance at Node $X$ (looking up into the drain of $M_2$):**\n   - For PMOS transistor $M_2$, the source is connected to $V_{DD}$ (AC ground) and the gate is connected to $V_{b2}$ (AC ground).\n   - Therefore, $v_{gs2} = 0$ and $v_{bs2} = 0$, which means the dependent current sources of $M_2$ are zero.\n   - Looking into the drain of $M_2$, we simply see its output resistance:\n     $$R_X = r_{o2}$$\n\n2. **Total Output Resistance (looking into the drain of $M_1$):**\n   - Transistor $M_1$ has its gate at AC ground ($V_{b1}$) and its source degenerated by the resistance at node $X$ ($R_X = r_{o2}$).\n   - Using the standard source-degenerated output resistance formula:\n\n   - **Neglecting Body Effect ($g_{mb1} = 0$):**\n     $$R_{\\text{out}} = r_{o1} + R_X + g_{m1} r_{o1} R_X$$\n     $$\\mathbf{R_{\\text{out}} = r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2} = (1 + g_{m1} r_{o1}) r_{o2} + r_{o1} \\approx g_{m1} r_{o1} r_{o2}}$$\n\n   - **Including Body Effect ($g_{mb1} \\neq 0$):**\n     $$R_{\\text{out}} = r_{o1} + R_X + (g_{m1} + g_{mb1}) r_{o1} R_X$$\n     $$\\mathbf{R_{\\text{out}} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1}) r_{o1} r_{o2} \\approx (g_{m1} + g_{mb1}) r_{o1} r_{o2}}$$\n\n---\n\n### **Method 2: Small-Signal Analysis (KCL/KVL)**\n\n1. Apply a test voltage $v_t$ at the output node (drain of $M_1$) and measure the test current $i_t$ flowing into it, such that $R_{\\text{out}} = \\frac{v_t}{i_t}$.\n2. Since no current exits through the gates, the entire current $i_t$ must flow through $M_2$ (which acts as a resistor $r_{o2}$ to ground):\n   $$v_X = i_t r_{o2}$$\n3. For transistor $M_1$, the gate and bulk are at AC ground ($v_{g1} = 0, v_{b1} = 0$), so:\n   $$v_{gs1} = 0 - v_X = -i_t r_{o2}$$\n   $$v_{bs1} = 0 - v_X = -i_t r_{o2}$$\n4. Writing KCL at the drain of $M_1$:\n   $$i_t = g_{m1} v_{gs1} + g_{mb1} v_{bs1} + \\frac{v_t - v_X}{r_{o1}}$$\n5. Substitute $v_X$, $v_{gs1}$, and $v_{bs1}$ into the KCL equation:\n   $$i_t = -(g_{m1} + g_{mb1}) i_t r_{o2} + \\frac{v_t - i_t r_{o2}}{r_{o1}}$$\n6. Multiply through by $r_{o1}$ and solve for $\\frac{v_t}{i_t}$:\n   $$i_t r_{o1} = -(g_{m1} + g_{mb1}) r_{o1} r_{o2} i_t + v_t - i_t r_{o2}$$\n   $$v_t = i_t \\left[ r_{o1} + r_{o2} + (g_{m1} + g_{mb1}) r_{o1} r_{o2} \\right]$$\n\n$$R_{\\text{out}} = \\frac{v_t}{i_t} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1}) r_{o1} r_{o2}$$",
        "format": "markdown",
        "sha256": "44f61f15164b81637baf5bd739c76b02f4f7e634263cdc19dafeb7a91914a743"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, recognizes M1 as the cascode device, and gives the correct output-resistance expression, including body effect.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 1820,
        "total_tokens": 2961,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 1820,
        "total_tokens": 2961,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the PMOS transistor $M_2$ operates in the **saturation region**, two conditions must be met: it must be turned on, and its source-to-drain voltage ($V_{SD2}$) must be greater than or equal to its overdrive voltage ($V_{OV2}$).\n\nHere is the step-by-step derivation of the biasing condition:\n\n---\n\n### 1. Turn-On Condition for $M_2$\nFor $M_2$ to conduct current, its source-to-gate voltage ($V_{SG2}$) must exceed its threshold voltage ($|V_{TH2}|$):\n$$V_{SG2} > |V_{TH2}|$$\n$$V_{DD} - V_{b2} > |V_{TH2}| \\implies \\mathbf{V_{b2} < V_{DD} - |V_{TH2}|}$$\n\n---\n\n### 2. Saturation Condition at Node $X$\nFor a PMOS transistor to remain in saturation, its drain voltage must be lower than its gate voltage plus one threshold voltage (or equivalently, $V_{SD2} \\ge V_{SG2} - |V_{TH2}|$):\n\n$$V_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TH2}|$$\n\nSimplifying this gives the maximum allowable voltage at node $X$:\n$$\\mathbf{V_X \\le V_{b2} + |V_{TH2}|}$$\n\n*(In terms of overdrive voltage $V_{OV2} = V_{SG2} - |V_{TH2}|$, this can also be written as $V_X \\le V_{DD} - V_{OV2}$.)*\n\n---\n\n### 3. Condition on Bias Voltages ($V_{b1}$ and $V_{b2}$)\nBecause the source of $M_1$ is connected to node $X$, the voltage $V_X$ is determined by the gate bias $V_{b1}$ and the source-to-gate voltage of $M_1$:\n$$V_X = V_{b1} + V_{SG1}$$\n\nSubstituting this expression for $V_X$ into the saturation inequality from Step 2 gives:\n$$V_{b1} + V_{SG1} \\le V_{b2} + |V_{TH2}|$$\n\nRearranging for $V_{b1}$ gives the final biasing requirement:\n$$\\mathbf{V_{b1} \\le V_{b2} + |V_{TH2}| - V_{SG1}}$$\n\n---\n\n### Summary of Equivalent Forms\nDepending on which circuit parameters are given, you can ensure $M_2$ is in saturation by satisfying any of these equivalent forms:\n\n1. **In terms of $V_X$:**\n   $$V_X \\le V_{b2} + |V_{TH2}|$$\n\n2. **In terms of $V_{b1}$ and $V_{b2}$:**\n   $$V_{b1} \\le V_{b2} + |V_{TH2}| - V_{SG1}$$\n\n3. **In terms of $V_{DD}$ and overdrive voltages ($V_{OV} = V_{SG} - |V_{TH}|$):**\n   $$V_{b1} \\le V_{DD} - V_{OV2} - V_{SG1}$$\n   *(or $V_{b1} \\le V_{DD} - V_{OV2} - V_{OV1} - |V_{TH1}|$)*",
        "format": "markdown",
        "sha256": "aa583e841d9a917da577033fcf69f1c382249ac44b21bf56e41a89b5a2dec805"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS saturation condition and uses M1’s relation V_X = V_b1 + V_SG1 to derive the corresponding condition on V_b1, matching the full-credit rule.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 2421,
        "total_tokens": 3570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1645,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 2421,
        "total_tokens": 3570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1645,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the PMOS transistor $M_2$ operates in the saturation region, two conditions must be met: it must be turned **ON**, and its source-to-drain voltage ($V_{SD2}$) must be large enough to pinch off the channel.\n\nHere is the step-by-step derivation of how to guarantee this in the given cascode circuit:\n\n---\n\n### 1. Turn-On Condition for $M_2$\nFirst, the source-to-gate voltage ($V_{SG2}$) must be greater than the magnitude of its threshold voltage ($|V_{TH2}|$):\n$$V_{SG2} > |V_{TH2}|$$\n\nSince the source is connected to $V_{DD}$ and the gate is at $V_{b2}$:\n$$V_{DD} - V_{b2} > |V_{TH2}| \\implies \\mathbf{V_{b2} < V_{DD} - |V_{TH2}|}$$\n\n---\n\n### 2. Saturation Condition at Node $X$\nFor a PMOS transistor to be in saturation, its source-to-drain voltage must be greater than or equal to its overdrive voltage ($V_{OV2} = V_{SG2} - |V_{TH2}|$):\n$$V_{SD2} \\ge V_{SG2} - |V_{TH2}|$$\n\nSubstituting the node voltages ($V_{S2} = V_{DD}$, $V_{D2} = V_X$, and $V_{G2} = V_{b2}$):\n$$V_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TH2}|$$\n\nCanceling $V_{DD}$ from both sides and multiplying by $-1$ gives the required voltage at node $X$:\n$$\\mathbf{V_X \\le V_{b2} + |V_{TH2}|}$$\n\n*(In other words, the drain voltage $V_X$ must not exceed the gate voltage $V_{b2}$ by more than one threshold voltage $|V_{TH2}|$, which alternatively means keeping at least one overdrive voltage across $M_2$: $V_X \\le V_{DD} - V_{OV2}$).*\n\n---\n\n### 3. Setting $V_{b1}$ to Control Node $X$\nIn this cascode configuration, the voltage at node $X$ is controlled by the gate bias of the bottom transistor, $M_1$. Specifically, $V_X$ sits one source-to-gate voltage ($V_{SG1}$) above $V_{b1}$:\n$$V_X = V_{b1} + V_{SG1}$$\n\nSubstituting this expression for $V_X$ into the saturation inequality from Step 2 gives the design condition for the bias voltages:\n$$V_{b1} + V_{SG1} \\le V_{b2} + |V_{TH2}|$$\n\n$$\\mathbf{V_{b1} \\le V_{b2} + |V_{TH2}| - V_{SG1}}$$\n\n---\n\n### Summary\nTo ensure $M_2$ stays in saturation:\n1. Choose **$V_{b2}$** low enough below $V_{DD}$ to turn $M_2$ on and set the desired current.\n2. Choose **$V_{b1}$** low enough so that it pulls node $X$ down to satisfy **$V_X \\le V_{b2} + |V_{TH2}|$** (which requires **$V_{b1} \\le V_{b2} + |V_{TH2}| - V_{SG1}$**).",
        "format": "markdown",
        "sha256": "5684f8a39cd3b26ba746f759a214d301e30471a2a06427c35ee612fd507f7257"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly treats both devices as PMOS, gives M2’s saturation condition, and uses VX = Vb1 + VSG1 to derive the corresponding condition on Vb1, matching the full-credit rule.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 2208,
        "total_tokens": 3357,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1412,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 2208,
        "total_tokens": 3357,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1412,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the PMOS transistor $M_2$ operates in the **saturation region**, two conditions must be met: the transistor must be turned **ON**, and its drain-to-source voltage must be large enough to pinch off the channel.\n\nHere is the step-by-step derivation of the required biasing conditions:\n\n---\n\n### 1. Identify the Terminals of $M_2$ (PMOS)\n* **Source ($S$):** Connected to $V_{DD}$\n* **Gate ($G$):** Connected to $V_{b2}$\n* **Drain ($D$):** Connected to node $X$\n\n---\n\n### 2. Condition 1: $M_2$ Must Be ON\nFor the PMOS transistor $M_2$ to conduct current, its source-to-gate voltage ($V_{SG2}$) must exceed its threshold voltage magnitude ($|V_{TH2}|$):\n\n$$V_{SG2} > |V_{TH2}|$$\n\n$$V_{DD} - V_{b2} > |V_{TH2}| \\implies \\mathbf{V_{b2} < V_{DD} - |V_{TH2}|}$$\n\n---\n\n### 3. Condition 2: $M_2$ Must Be in Saturation (Condition on Node $X$)\nFor a PMOS device to be in saturation, its source-to-drain voltage ($V_{SD2}$) must be greater than or equal to its overdrive voltage ($V_{OV2} = V_{SG2} - |V_{TH2}|$):\n\n$$V_{SD2} \\ge V_{SG2} - |V_{TH2}|$$\n\nSubstitute the actual node voltages into the inequality:\n\n$$V_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TH2}|$$\n\nSubtracting $V_{DD}$ from both sides and multiplying by $-1$ gives the maximum allowable voltage at node $X$:\n\n$$\\mathbf{V_X \\le V_{b2} + |V_{TH2}|}$$\n\n*(Alternatively, written in terms of overdrive voltage: $V_X \\le V_{DD} - V_{OV2}$)*\n\n---\n\n### 4. Practical Design Condition: Choosing $V_{b1}$\nIn this cascode circuit, you cannot set $V_X$ directly; instead, **node $X$ is controlled by the gate bias of $M_1$ ($V_{b1}$)**. \n\nBecause $V_X$ is the source of $M_1$, its voltage is given by:\n$$V_X = V_{b1} + V_{SG1}$$\n\nSubstituting this into our saturation condition for $M_2$ gives:\n\n$$V_{b1} + V_{SG1} \\le V_{b2} + |V_{TH2}|$$\n\nRearranging for $V_{b1}$ yields the final design rule:\n\n$$\\mathbf{V_{b1} \\le V_{b2} + |V_{TH2}| - V_{SG1}}$$\n\n*(Or, equivalently in terms of $V_{DD}$: **$V_{b1} \\le V_{DD} - (V_{SG2} - |V_{TH2}|) - V_{SG1}$**)*\n\n---\n\n### Summary\nTo keep $M_2$ in saturation:\n1. Bias $V_{b2}$ low enough below $V_{DD}$ to turn $M_2$ on ($V_{b2} < V_{DD} - |V_{TH2}|$).\n2. Bias the cascode gate voltage **$V_{b1}$ low enough** so that node $X$ stays below $V_{b2} + |V_{TH2}|$. If $V_{b1}$ is set too high, it pushes $V_X$ too close to $V_{DD}$, forcing $M_2$ into the triode (linear) region.",
        "format": "markdown",
        "sha256": "6523758a6c9bbb152174eb9760978ddaed8b25d4e1739b53169a2d203b608f15"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives M2’s PMOS saturation condition and uses VX = Vb1 + VSG1 to derive the corresponding condition on Vb1. The extra turn-on condition is also valid.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 2467,
        "total_tokens": 3616,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 2467,
        "total_tokens": 3616,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Cascode Amplifier** (specifically, an NMOS telescopic cascode stage) biased with an ideal current-source load $I_1$. \n\nIt consists of a **Common-Source (CS) stage ($M_1$)** driving a **Common-Gate (CG) stage ($M_2$)**. Below is a comprehensive analysis of its DC operation, small-signal parameters, and key design trade-offs.\n\n---\n\n### 1. Component Roles\n* **$M_1$ (Input Device / Transconductor):** Converts the small-signal input voltage $v_{\\text{in}}$ into a small-signal drain current.\n* **$M_2$ (Cascode Device):** Acts as a current buffer. It shields $M_1$ from voltage variations at the output node and boosts the overall output impedance of the circuit.\n* **$I_1$ (Active Load):** Provides the DC bias current for both transistors and presents an infinite small-signal resistance to maximize voltage gain.\n\n---\n\n### 2. DC Analysis & Biasing Conditions\nFor the circuit to function properly as a high-gain amplifier, both $M_1$ and $M_2$ must operate in the **saturation region**. Because the components are in series, they share the same DC drain current:\n$$I_{D1} = I_{D2} = I_1$$\n\n#### **Conditions for Saturation:**\n1. **For $M_1$:**\n   * The DC input voltage must establish the required current $I_1$:\n     $$V_{\\text{in,DC}} = V_{GS1} = V_{TH1} + V_{OV1}$$\n     *(where $V_{OV1} = \\sqrt{\\frac{2I_1}{\\mu_n C_{ox} (W/L)_1}}$ is the overdrive voltage of $M_1$)*\n   * The drain-to-source voltage must exceed the overdrive voltage:\n     $$V_X \\ge V_{GS1} - V_{TH1} = V_{OV1}$$\n\n2. **For $M_2$:**\n   * Since $V_X = V_{b1} - V_{GS2}$, to keep $M_1$ in saturation we must choose the bias voltage $V_{b1}$ such that:\n     $$V_{b1} \\ge V_{GS2} + V_{OV1} = V_{TH2} + V_{OV2} + V_{OV1}$$\n   * For $M_2$ to remain in saturation, the output voltage must satisfy:\n     $$v_{\\text{out}} \\ge V_{b1} - V_{TH2}$$\n\n#### **Minimum Output Voltage (Headroom Limit):**\nIf $V_{b1}$ is chosen at its minimum allowable value ($V_{b1} = V_{TH2} + V_{OV1} + V_{OV2}$) to maximize voltage swing, the minimum possible output voltage before $M_2$ enters the triode region is:\n$$v_{\\text{out,min}} = V_{OV1} + V_{OV2}$$\n\n---\n\n### 3. Small-Signal Analysis\nAssuming both transistors are in saturation, we can determine the small-signal parameters (including channel-length modulation $r_o$ and the body effect $g_{mb2}$ for $M_2$):\n\n#### **A. Input Resistance ($R_{\\text{in}}$)**\nSince the input is applied purely to the insulated gate of $M_1$:\n$$R_{\\text{in}} = \\infty$$\n\n#### **B. Output Resistance ($R_{\\text{out}}$)**\nBecause the ideal current source $I_1$ acts as an open circuit in the small-signal model, $R_{\\text{out}}$ is simply the resistance looking down into the drain of $M_2$. $M_2$ looks like a common-source transistor with source degeneration equal to $r_{o1}$:\n$$R_{\\text{out}} = r_{o2} + \\left[1 + (g_{m2} + g_{mb2})r_{o2}\\right]r_{o1}$$\n\nSince $(g_{m2} + g_{mb2})r_{o2} \\gg 1$, this simplifies to the well-known cascode impedance approximation:\n$$R_{\\text{out}} \\approx (g_{m2} + g_{mb2}) r_{o2} r_{o1}$$\n*(Note: The cascode transistor $M_2$ boosts the output impedance of $M_1$ by a factor of roughly $g_{m2}r_{o2}$, the intrinsic gain of $M_2$.)*\n\n#### **C. Effective Transconductance ($G_m$)**\nTo find $G_m$, we ground $v_{\\text{out}}$ and find the short-circuit output current $i_{\\text{out}} / v_{\\text{in}}$. \n$M_1$ generates a current $g_{m1}v_{\\text{in}}$, which splits between $r_{o1}$ and the resistance looking into the source of $M_2$ (which is approximately $\\frac{1}{g_{m2} + g_{mb2}}$). Because $\\frac{1}{g_{m2} + g_{mb2}} \\ll r_{o1}$, almost all the current flows through $M_2$ to the output:\n$$G_m = \\frac{g_{m1} r_{o1} \\left[1 + (g_{m2} + g_{mb2})r_{o2}\\right]}{r_{o2} + r_{o1}\\left[1 + (g_{m2} + g_{mb2})r_{o2}\\right]} \\approx g_{m1}$$\n\n#### **D. Voltage Gain ($A_v$)**\nCombining the transconductance and output resistance:\n$$A_v = -G_m R_{\\text{out}} = -g_{m1} r_{o1} \\left[1 + (g_{m2} + g_{mb2})r_{o2}\\right]$$\n\nUsing the standard approximation:\n$$A_v \\approx -g_{m1} (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\nIf we ignore the body effect ($g_{mb2} = 0$), the gain is approximately:\n$$A_v \\approx -(g_{m1} r_{o1})(g_{m2} r_{o2})$$\nThis shows that the maximum voltage gain of a cascode stage is roughly the **square of the intrinsic gain** of a single transistor.\n\n---\n\n### 4. Key Advantages and Disadvantages\n\n| Advantages | Disadvantages |\n| :--- | :--- |\n| **Very High Voltage Gain:** Achieves gain on the order of $(g_m r_o)^2$ without cascading multiple stages, making it ideal for single-stage op-amps. | **Reduced Output Voltage Swing:** Stacking $M_2$ on top of $M_1$ consumes an additional overdrive voltage ($V_{OV2}$) of headroom. |\n| **High Output Impedance:** Essential for realizing high-quality current sources and high-gain amplifiers. | **Additional Bias Circuitry:** Requires generating an accurate DC bias voltage $V_{b1}$. |\n| **Reduced Miller Effect:** In practical circuits where $I_1$ has a finite resistance $R_L$ (or at high frequencies due to load capacitance), $M_2$ lowers the impedance at node $X$, reducing the voltage gain across $M_1$ and minimizing the Miller multiplication of $C_{GD1}$. | |",
        "format": "markdown",
        "sha256": "9d17a246f9944f886b5f5bedda267f90c47f8d8c88c6cf9de92e81478185d248"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression specified by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 3803,
        "total_tokens": 4917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2127,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 3803,
        "total_tokens": 4917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2127,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is an **NMOS Cascode Amplifier** biased with an ideal DC current-source load ($I_1$). \n\nBelow is a comprehensive analysis covering its topology, DC biasing conditions, small-signal behavior, and key performance characteristics.\n\n---\n\n### 1. Circuit Topology and Roles of Components\nThe cascode configuration is formed by stacking a Common-Gate (CG) stage on top of a Common-Source (CS) stage:\n* **$M_1$ (Input Device – Common-Source):** Converts the input voltage ($v_{\\text{in}}$) into a small-signal drain current ($i_{d1} \\approx g_{m1}v_{\\text{in}}$).\n* **$M_2$ (Cascode Device – Common-Gate):** Biased by a fixed DC voltage $V_{b1}$. It acts as a current buffer that passes the signal current from $M_1$ to the output while multiplying the output impedance.\n* **$I_1$ (Active Load):** Provides the DC bias current for both transistors and acts as an infinite small-signal load resistance.\n\n---\n\n### 2. DC Analysis & Saturation Conditions\n\nSince $M_1$, $M_2$, and $I_1$ are in series, they share the same DC bias current:\n$$I_{D1} = I_{D2} = I_1$$\n\nFor the circuit to operate as a high-gain amplifier, **both $M_1$ and $M_2$ must operate in the saturation region**:\n\n1. **Condition for $M_1$ (Input Voltage & Node $X$):**\n   * Gate-to-source voltage must exceed the threshold voltage: \n     $$V_{\\text{in,DC}} > V_{TH1}$$\n   * Drain-to-source voltage ($V_X$) must be at least the overdrive voltage of $M_1$ ($V_{OV1} = V_{GS1} - V_{TH1}$):\n     $$V_X \\ge V_{GS1} - V_{TH1} = V_{OV1}$$\n\n2. **Condition for Bias Voltage $V_{b1}$:**\n   * Since $V_X = V_{b1} - V_{GS2}$, keeping $M_1$ in saturation requires:\n     $$V_{b1} - V_{GS2} \\ge V_{OV1} \\implies V_{b1} \\ge V_{OV1} + V_{GS2} = V_{OV1} + V_{OV2} + V_{TH2}$$\n   * To maximize the output voltage swing, $V_{b1}$ is typically chosen at the minimum value (plus a small safety margin) such that $V_X \\approx V_{OV1}$.\n\n3. **Condition for $M_2$ (Minimum Output Voltage / Headroom):**\n   * For $M_2$ to remain in saturation, $V_{DS2} = V_{\\text{out}} - V_X \\ge V_{OV2}$:\n     $$V_{\\text{out}} \\ge V_X + V_{OV2} = V_{b1} - V_{TH2}$$\n   * If $V_X$ is biased optimally at $V_{OV1}$, the **minimum allowable output voltage** is:\n     $$V_{\\text{out,min}} = V_{OV1} + V_{OV2}$$\n\n---\n\n### 3. Small-Signal Analysis\n\nAssuming both transistors are in saturation, we include channel-length modulation ($r_{o1}, r_{o2}$) and the body effect on $M_2$ ($g_{mb2}$, since its source at node $X$ is not connected to ground).\n\n#### A. Input Resistance ($R_{\\text{in}}$)\nLooking into the gate of $M_1$, the low-frequency input resistance is infinite:\n$$R_{\\text{in}} = \\infty$$\n\n#### B. Output Resistance ($R_{\\text{out}}$)\nLooking down into the drain of $M_2$ with $v_{\\text{in}}$ grounded, $M_1$ acts as a source-degeneration resistor of value $r_{o1}$ connected to the source of $M_2$. Using the standard source-degenerated output resistance formula:\n$$R_{\\text{out}} = \\left[1 + (g_{m2} + g_{mb2})r_{o2}\\right]r_{o1} + r_{o2}$$\n\nFor $(g_{m2} + g_{mb2})r_{o2} \\gg 1$, this simplifies to:\n$$R_{\\text{out}} \\approx (g_{m2} + g_{mb2}) r_{o2} r_{o1}$$\n*(Note: The cascode transistor $M_2$ boosts the output impedance of $M_1$ by a factor of roughly its intrinsic gain, $g_{m2}r_{o2}$.)*\n\n#### C. Effective Transconductance ($G_m$)\nTo find the short-circuit transconductance $G_m = \\left.\\frac{i_{\\text{out}}}{v_{\\text{in}}}\\right|_{v_{\\text{out}}=0}$, we ground the output node for small signals:\n* The resistance looking up into the source of $M_2$ (with its drain grounded) is:\n  $$R_{X,\\text{up}} = \\frac{1}{g_{m2} + g_{mb2}} \\parallel r_{o2} \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n* The current generated by $M_1$ ($g_{m1}v_{\\text{in}}$) divides between $r_{o1}$ and $R_{X,\\text{up}}$:\n  $$G_m = g_{m1} \\frac{r_{o1}}{r_{o1} + R_{X,\\text{up}}} = g_{m1} \\frac{(g_{m2} + g_{mb2})r_{o1}r_{o2} + r_{o1}}{(g_{m2} + g_{mb2})r_{o1}r_{o2} + r_{o1} + r_{o2}} \\approx g_{m1}$$\n\n#### D. Small-Signal Voltage Gain ($A_v$)\nCombining $G_m$ and $R_{\\text{out}}$, the exact low-frequency open-loop voltage gain is:\n$$A_v = -G_m R_{\\text{out}} = -g_{m1} r_{o1} \\left[1 + (g_{m2} + g_{mb2})r_{o2}\\right]$$\n\nUsing the standard approximation $(g_{m2} + g_{mb2})r_{o2} \\gg 1$:\n$$A_v \\approx -g_{m1} (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\n\n---\n\n### 4. Key Characteristics & Trade-offs\n\n| Feature | Description |\n| :--- | :--- |\n| **High Voltage Gain** | A simple common-source stage has a gain of $-g_{m1}r_{o1}$. By cascoding with $M_2$, the gain is squared in magnitude to roughly $-(g_m r_o)^2$, making it ideal for single-stage op-amps (e.g., telescopic op-amps). |\n| **Shielding Effect** | $M_2$ isolates node $X$ from large voltage variations at $v_{\\text{out}}$. Any voltage change $\\Delta V_{\\text{out}}$ is attenuated at node $X$ by a factor of $\\approx (g_{m2} + g_{mb2})r_{o2}$. This minimizes channel-length modulation effects on $M_1$ and improves current-mirror accuracy when used as a constant current sink. |\n| **Reduced Miller Effect** | When loaded by a finite impedance $R_L \\ll R_{\\text{out}}$ (or at high frequencies where output capacitance shunts $v_{\\text{out}}$), the resistance at node $X$ is low ($\\approx 1/g_{m2}$), keeping the voltage gain from the input to node $X$ small ($\\approx -g_{m1}/g_{m2}$). This drastically reduces the Miller multiplication of the gate-drain capacitance $C_{GD1}$, improving high-frequency bandwidth. |\n| **Voltage Headroom Penalty** | Stacking $M_2$ on top of $M_1$ reduces the maximum possible output voltage swing by at least $V_{OV2}$ compared to a simple common-source stage. |",
        "format": "markdown",
        "sha256": "7a5ff044a419a0cec8d0ceaadfaada0894747e54df0bc768324daea1986b4c26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression required for full credit.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4579,
        "total_tokens": 5693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2680,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4579,
        "total_tokens": 5693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2680,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **Cascode Amplifier** (specifically, an NMOS cascode stage loaded with an ideal current source). It consists of a **Common-Source (CS)** stage ($M_1$) stacked beneath a **Common-Gate (CG)** stage ($M_2$).\n\nHere is a complete large-signal (DC) and small-signal (AC) analysis of the circuit.\n\n---\n\n### 1. Component Roles\n* **$M_1$ (Input Device / Common-Source Stage):** Converts the small-signal input voltage ($v_{\\text{in}}$) into a small-signal drain current.\n* **$M_2$ (Cascode Device / Common-Gate Stage):** Acts as a buffer that passes the signal current from $M_1$ to the output while boosting the total output impedance and shielding node $X$ from output voltage variations.\n* **$I_1$ (Active Load):** Provides the DC bias current ($I_{D1} = I_{D2} = I_1$) and acts as an open circuit (infinite resistance) in small-signal AC analysis.\n\n---\n\n### 2. DC Analysis & Biasing (Large-Signal)\n\nFor the circuit to function properly as a high-gain amplifier, both $M_1$ and $M_2$ must operate in the **saturation region**.\n\n1. **Condition for $M_1$ to be in saturation:**\n   $$V_{DS1} \\ge V_{GS1} - V_{TH1}$$\n   $$V_X \\ge V_{\\text{in}} - V_{TH1} = V_{OV1}$$\n   *(where $V_{OV1}$ is the overdrive voltage of $M_1$)*\n\n2. **Condition for $V_{b1}$ (Gate bias of $M_2$):**\n   Since $V_X = V_{b1} - V_{GS2}$, substituting this into the above inequality gives the minimum required bias voltage $V_{b1}$:\n   $$V_{b1} - V_{GS2} \\ge V_{OV1} \\implies V_{b1} \\ge V_{GS2} + V_{OV1}$$\n   To maximize output voltage swing, $V_{b1}$ is typically chosen at the minimum value: \n   $$V_{b1,\\text{min}} = V_{TH2} + V_{OV2} + V_{OV1}$$\n\n3. **Condition for $M_2$ to be in saturation (Minimum Output Voltage):**\n   $$V_{DS2} \\ge V_{GS2} - V_{TH2} = V_{OV2}$$\n   $$V_{\\text{out}} - V_X \\ge V_{OV2} \\implies V_{\\text{out}} \\ge V_X + V_{OV2}$$\n   If $V_{b1}$ is biased optimally such that $V_X = V_{OV1}$, the minimum allowable output voltage (headroom limit) is:\n   $$V_{\\text{out,min}} = V_{OV1} + V_{OV2}$$\n\n---\n\n### 3. Small-Signal Analysis\n\nAssuming both transistors are in saturation, we account for channel-length modulation ($r_{o1}, r_{o2}$) and the body effect on $M_2$ ($g_{mb2}$, since its source is not grounded). The ideal current source $I_1$ becomes an open circuit in AC analysis.\n\n#### A. Input Resistance ($R_{\\text{in}}$)\nLooking into the gate of $M_1$, the input resistance is purely capacitive at high frequencies and infinite at low frequencies:\n$$R_{\\text{in}} = \\infty$$\n\n#### B. Output Resistance ($R_{\\text{out}}$)\nLooking into the drain of $M_2$ (with $v_{\\text{in}} = 0$), $M_1$ behaves simply as a resistor of value $r_{o1}$ connected from the source of $M_2$ (node $X$) to ground. Using the standard source-degenerated output resistance formula:\n$$R_{\\text{out}} = [1 + (g_{m2} + g_{mb2})r_{o2}]r_{o1} + r_{o2}$$\n\nFor $(g_{m2} + g_{mb2})r_{o2} \\gg 1$, this simplifies to the well-known approximation:\n$$R_{\\text{out}} \\approx (g_{m2} + g_{mb2}) r_{o2} r_{o1}$$\n*(Note: The cascode transistor $M_2$ boosts the output impedance of $M_1$ by a factor of roughly $g_{m2}r_{o2}$, the intrinsic gain of $M_2$.)*\n\n#### C. Effective Transconductance ($G_m$)\nTo find the short-circuit transconductance $G_m = \\left. \\frac{i_{\\text{out}}}{v_{\\text{in}}} \\right|_{v_{\\text{out}}=0}$:\n* $M_1$ generates a current $g_{m1}v_{\\text{in}}$.\n* At node $X$, this current divides between $r_{o1}$ and the resistance looking into the source of $M_2$ (which is $\\frac{1}{g_{m2} + g_{mb2}} \\parallel r_{o2}$).\n* Since $\\frac{1}{g_{m2} + g_{mb2}} \\ll r_{o1}$, almost all the current produced by $M_1$ flows into the source of $M_2$ and reaches the output:\n$$G_m \\approx g_{m1}$$\n\n*(Exact expression: $G_m = \\frac{g_{m1}r_{o1}[1 + (g_{m2}+g_{mb2})r_{o2}]}{[1 + (g_{m2}+g_{mb2})r_{o2}]r_{o1} + r_{o2}}$)*\n\n#### D. Voltage Gain ($A_v$)\nUsing the exact expressions for $G_m$ and $R_{\\text{out}}$ (or simply noting that the small-signal drain current of $M_2$ must be zero because of the open-circuit current source $I_1$):\n\n1. With zero total small-signal current leaving node $X$, $M_1$ acts as an unloaded common-source stage:\n   $$v_x = -g_{m1} r_{o1} v_{\\text{in}}$$\n2. $M_2$ acts as an unloaded common-gate stage driven at its source by $v_x$:\n   $$v_{\\text{out}} = [1 + (g_{m2} + g_{mb2})r_{o2}] v_x$$\n3. Combining the two equations gives the exact **small-signal voltage gain**:\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m1} r_{o1} [1 + (g_{m2} + g_{mb2})r_{o2}]$$\n\nFor $(g_{m2} + g_{mb2})r_{o2} \\gg 1$, this approximates to:\n$$A_v \\approx -g_{m1} (g_{m2} + g_{mb2}) r_{o1} r_{o2}$$\nThus, the voltage gain is roughly the **square of the intrinsic gain** of a single transistor: $|A_v| \\sim (g_m r_o)^2$.\n\n---\n\n### 4. Summary of Key Characteristics\n\n| Parameter | Expression (Approximate) | Comparison to Simple CS Stage |\n| :--- | :--- | :--- |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\infty$ | Same |\n| **Output Resistance ($R_{\\text{out}}$)** | $(g_{m2} + g_{mb2}) r_{o2} r_{o1}$ | Higher by factor of $\\approx g_{m2}r_{o2}$ |\n| **Transconductance ($G_m$)** | $g_{m1}$ | Same |\n| **Voltage Gain ($A_v$)** | $-g_{m1}(g_{m2} + g_{mb2}) r_{o1} r_{o2}$ | Higher by factor of $\\approx g_{m2}r_{o2}$ |\n| **Min. Output Voltage ($V_{\\text{out,min}}$)** | $V_{OV1} + V_{OV2}$ | Worse (reduced swing by $V_{OV2}$) |\n\n### 5. Advantages & Trade-offs\n* **High Gain:** Achieves two-stage-like voltage gain within a single-stage current path.\n* **Reduced Miller Effect (High Bandwidth):** In a realistic circuit where the load resistance $R_L$ is finite (rather than an ideal current source), the impedance at node $X$ is low ($\\approx \\frac{1}{g_{m2}}$), which minimizes the voltage gain from $v_{\\text{in}}$ to node $X$ and greatly reduces the Miller multiplication of the gate-drain capacitance $C_{GD1}$.\n* **Trade-off (Voltage Headroom):** Stacking $M_2$ on top of $M_1$ reduces the maximum available output voltage swing by at least one overdrive voltage ($V_{OV2}$).",
        "format": "markdown",
        "sha256": "0d5d16576f8490854169aee5eb56fced52114b25bd42ac1e79e867700ffdba7f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression specified by the full-credit rule. The overbroad finite-load comment is secondary and does not change the core analysis.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4359,
        "total_tokens": 5473,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2294,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1114,
        "output_tokens": 4359,
        "total_tokens": 5473,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2294,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the circuit shown in the figure is **not** a cascode structure. \n\nIf you look closely at the transistor symbols and their terminal connections, you can see why:\n\n### 1. Identify the Transistor Types and Connections\n* **$M_2$ is an NMOS transistor** (arrow on the bottom terminal pointing *outward*): Its gate is tied to a constant bias voltage $V_{b1}$, its drain is connected to $V_{\\text{out}}$, and its source is at the bottom. It operates as a **common-gate (CG)** stage.\n* **$M_1$ is a PMOS transistor** (arrow on the top terminal pointing *inward*): Its drain is connected to ground, its gate is driven by $V_{\\text{in}}$, and its **source** is at the top (connected to the source of $M_2$). \n\n---\n\n### 2. Why This is Not a Cascode\n\n1. **Source-to-Source Connection (Instead of Drain-to-Source):**\n   By definition, a cascode stage consists of a **common-source (CS)** stage feeding directly into the source of a **common-gate (CG)** stage. This requires the **drain** of the input transistor ($M_1$) to be connected to the **source** of the cascode transistor ($M_2$). In this diagram, the **source** of $M_1$ is connected to the **source** of $M_2$.\n\n2. **Common-Drain + Common-Gate Topology:**\n   Because the signal enters the gate of $M_1$ and is passed to $M_2$ via the **source** of $M_1$ (while its drain is grounded), $M_1$ is actually operating as a **source follower (common-drain stage)** rather than a common-source stage. Therefore, this circuit is a cascade of a common-drain stage and a common-gate stage.\n\n3. **Loss of High Output Impedance:**\n   A defining benefit of a true cascode is that the common-gate transistor multiplies the high drain resistance ($r_{o1}$) of the input transistor, boosting the output resistance looking into the drain of $M_2$ to roughly $g_{m2}r_{o2}r_{o1}$. \n   \n   In this circuit, the source of $M_2$ looks down into the **source** of $M_1$, which presents a very low impedance of approximately $\\frac{1}{g_{m1}} \\parallel r_{o1} \\approx \\frac{1}{g_{m1}}$. As a result, the output resistance looking into the drain of $M_2$ is only:\n   $$R_{\\text{out,drain}} \\approx r_{o2}\\left(1 + \\frac{g_{m2}}{g_{m1}}\\right)$$\n   which completely loses the $g_m r_o^2$ impedance-boosting property of a cascode.\n\n---\n\n### Note: How to Properly Cascode an NMOS and a PMOS\nBecause DC current flows from drain to source in an NMOS and from source to drain in a PMOS, you cannot simply stack an NMOS and a PMOS in series without connecting their sources or drains together. To correctly connect the **drain** of a PMOS input device ($M_1$) to the **source** of an NMOS cascode device ($M_2$), an additional DC bias current source must be added at the shared node—a structure known as a **folded cascode**.",
        "format": "markdown",
        "sha256": "132f9b9b8e9187e1bcf3c54ebfa7105af066c021ca473da03ab3f898ad4bb05d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower rather than a common-source stage, so M2’s common-gate device does not provide cascode resistance boosting. The stated output-resistance approximation is consistent with the golden solution.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1147,
        "output_tokens": 3539,
        "total_tokens": 4686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2778,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1147,
        "output_tokens": 3539,
        "total_tokens": 4686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2778,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the circuit shown in the figure is **not** a cascode structure. \n\nHere is the detailed breakdown of why:\n\n### 1. Identify the Transistor Terminals\nLook closely at the arrows on the two MOSFET symbols:\n* **$M_1$ (Bottom) is a PMOS transistor:** The arrow is on the top terminal pointing *inward*. This means the **top terminal is the source** and the **bottom terminal (connected to ground) is the drain**.\n* **$M_2$ (Top) is an NMOS transistor:** The arrow is on the bottom terminal pointing *outward*. This means the **bottom terminal is the source** and the **top terminal (connected to $V_{\\text{out}}$) is the drain**.\n\n---\n\n### 2. Why It Is Not a Cascode\n* **Definition of a Cascode:** A true cascode amplifier consists of a **Common-Source (CS)** stage feeding into a **Common-Gate (CG)** stage. Topologically, the **drain** of the input transistor ($M_1$) must connect to the **source** of the cascode transistor ($M_2$).\n* **What This Circuit Actually Is:** Because $M_1$ is a PMOS with its drain grounded, its output signal is taken from its **source**. Therefore, $M_1$ operates as a **Source Follower (Common-Drain stage)** driving a **Common-Gate stage** ($M_2$). The two devices are connected **source-to-source** rather than drain-to-source.\n\n---\n\n### 3. Impact on Circuit Performance\nThe main advantage of a true cascode is that the high drain impedance ($r_{o1}$) of $M_1$ is multiplied by the intrinsic gain ($g_{m2}r_{o2}$) of $M_2$, yielding a very high output resistance ($\\approx g_{m2}r_{o2}r_{o1}$).\n\nIn the circuit shown:\n* Looking down into the **source** of $M_1$, the impedance is **low**: \n  $$R_{\\text{source},1} = \\frac{1}{g_{m1}} \\parallel r_{o1} \\approx \\frac{1}{g_{m1}}$$\n* As a result, the output resistance looking into the drain of $M_2$ is only boosted by the ratio of transconductances rather than by $g_{m1}r_{o1}$:\n  $$R_{\\text{out}} = R_D \\parallel \\left[ r_{o2} + (1 + g_{m2}r_{o2})\\left(\\frac{1}{g_{m1}} \\parallel r_{o1}\\right) \\right] \\approx R_D \\parallel \\left[ r_{o2}\\left(1 + \\frac{g_{m2}}{g_{m1}}\\right) \\right]$$\n\nFor this circuit to be a true cascode, **$M_1$ would need to be replaced with an NMOS transistor** (so that its source is grounded and its drain connects to the source of $M_2$).",
        "format": "markdown",
        "sha256": "925309ace8b38f4e7fa9e53c63717fe7632755142dd913f722ddf8005ebdd778"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower and M2 as common-gate, so the circuit is not a cascode and lacks the cascode resistance boost. The output-resistance expression is also consistent with the golden solution.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1147,
        "output_tokens": 2853,
        "total_tokens": 4000,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1147,
        "output_tokens": 2853,
        "total_tokens": 4000,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, the circuit shown in the figure is not a cascode structure.** \n\nAlthough the two stacked transistors superficially resemble a standard cascode at first glance, a closer inspection of the transistor symbols and terminal connections reveals why it is not:\n\n---\n\n### 1. Identification of the Transistors and Configurations\n* **Bottom Transistor ($M_1$):** Look closely at the arrow on $M_1$. It is located on the **top terminal** and points **inward** toward the gate. This means $M_1$ is a **PMOS transistor** whose **source** is at the top and whose **drain** is connected to ground. Because the input $V_{\\text{in}}$ is applied to the gate and the signal exits through the source, $M_1$ operates as a **Source Follower (Common-Drain stage)**.\n* **Top Transistor ($M_2$):** The arrow on $M_2$ is located on the **bottom terminal** and points **outward**. This means $M_2$ is an **NMOS transistor** with its **source** at the bottom and its **drain** connected to $V_{\\text{out}}$. With its gate tied to a constant DC bias voltage ($V_{b1}$), $M_2$ operates as a **Common-Gate (CG) stage**.\n\n---\n\n### 2. Why It Is Not a Cascode\n* **Definition of a Cascode:** By definition, a cascode amplifier consists of a **Common-Source (CS)** stage feeding directly into a **Common-Gate (CG)** stage. In a true cascode, the **drain** of the input device must be connected to the **source** of the cascode device so that the input transistor acts as a high-output-impedance transconductance stage ($r_{o1}$ looking into its drain).\n* **Actual Topology Shown:** In this circuit, the **source** of $M_1$ is connected to the **source** of $M_2$. Therefore, this is a **Common-Drain (Source Follower) stage driving a Common-Gate stage**, rather than a Common-Source stage driving a Common-Gate stage.\n\n---\n\n### 3. Electrical Differences from a True Cascode\n\n1. **No Cascode Output-Impedance Boosting:**\n   * In a true NMOS cascode, the impedance looking down into the drain of $M_1$ is $r_{o1}$ (very high), which gets multiplied by the intrinsic gain of $M_2$ ($g_{m2}r_{o2}$) to yield a massive output resistance:\n     $$R_{\\text{out, cascode}} \\approx (g_{m2}r_{o2}r_{o1}) \\parallel R_D$$\n   * In **this circuit**, the impedance looking down into the **source** of the PMOS transistor $M_1$ is very low—approximately $\\frac{1}{g_{m1}} \\parallel r_{o1} \\approx \\frac{1}{g_{m1}}$. Consequently, the resistance looking into the drain of $M_2$ is only on the order of $r_{o2}$:\n     $$R_{\\text{out}} = \\left[ (1 + g_{m2}r_{o2})\\left(\\frac{1}{g_{m1}} \\parallel r_{o1}\\right) + r_{o2} \\right] \\parallel R_D \\approx \\left(1 + \\frac{g_{m2}}{g_{m1}}\\right)r_{o2} \\parallel R_D$$\n\n2. **Non-Inverting Voltage Gain:**\n   * A standard cascode is an **inverting** amplifier ($A_v \\approx -g_{m1}R_D$).\n   * Because both a source follower ($M_1$) and a common-gate stage ($M_2$) are non-inverting, this circuit has a **positive (non-inverting)** small-signal voltage gain (neglecting channel-length modulation and body effect):\n     $$A_v = \\frac{V_{\\text{out}}}{V_{\\text{in}}} \\approx \\left(\\frac{g_{m1}}{g_{m1} + g_{m2}}\\right) g_{m2} R_D = \\left(\\frac{g_{m1}g_{m2}}{g_{m1} + g_{m2}}\\right) R_D$$",
        "format": "markdown",
        "sha256": "a7217534f4fbd1135578253322dd8f8c2c860faaf611a2c206c74b241554dae4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower, not the common-source device required for a cascode, and explains the absence of cascode resistance boosting. The extra output-resistance discussion is consistent with the golden solution.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1147,
        "output_tokens": 2926,
        "total_tokens": 4073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1968,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1147,
        "output_tokens": 2926,
        "total_tokens": 4073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1968,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the Miller effect is drastically reduced in a cascode amplifier, we first need to look at what causes the Miller effect in a standard amplifier, and then see how the cascode topology changes the circuit dynamics.\n\n*(Note: I will use MOSFET terminology—Gate, Drain, Source—for this explanation, but the exact same logic applies to BJTs using Base, Collector, and Emitter).*\n\n---\n\n### 1. The Problem: The Miller Effect in a Standard Amplifier\nIn a standard Common-Source (CS) amplifier, there is a small, unavoidable parasitic capacitance between the input (Gate) and the output (Drain), known as the Gate-to-Drain capacitance ($C_{gd}$). \n\nBecause the CS amplifier is an **inverting** amplifier, as the input voltage at the Gate goes *up*, the output voltage at the Drain goes *down* by a large amount (determined by the voltage gain, $-A_v$). \n\nThis large voltage swing across $C_{gd}$ forces the input source to supply much more charge than it would if the other side of the capacitor were grounded. To the input signal, the capacitor looks artificially massive. This is the **Miller Effect**, and the effective input capacitance ($C_{Miller}$) is calculated as:\n\n$$C_{Miller} = C_{gd} \\times (1 + |A_v|)$$\n\nIf the transistor has a voltage gain of 100, that tiny $C_{gd}$ looks **101 times larger** at the input. This massive capacitance interacts with the resistance of the signal source, creating a low-pass filter that kills the amplifier's high-frequency performance (bandwidth).\n\n---\n\n### 2. The Solution: How the Cascode Fixes This\nA cascode amplifier consists of two transistors stacked on top of each other:\n1. **The Input Transistor ($M_1$):** Configured as a Common-Source (CS) stage.\n2. **The Cascode Transistor ($M_2$):** Configured as a Common-Gate (CG) stage, sitting directly on top of $M_1$.\n\nThe input goes into the Gate of $M_1$. The Drain of $M_1$ is connected to the Source of $M_2$. The final output is taken from the Drain of $M_2$.\n\nHere is why this eliminates the Miller effect:\n\n#### A. It crushes the voltage gain of the first transistor ($M_1$)\nRemember, the Miller effect on the input transistor $M_1$ depends **only** on the voltage gain from $M_1$’s Gate to $M_1$’s Drain. \n\nThe voltage gain of $M_1$ is determined by its transconductance ($g_{m1}$) multiplied by the load resistance connected to its Drain ($A_{v1} = -g_{m1} \\times R_{load}$). \n\nIn a cascode, the \"load\" connected to the Drain of $M_1$ is the Source of $M_2$. Looking into the Source of a Common-Gate transistor ($M_2$), the input impedance is extremely low—approximately **$1/g_{m2}$**. \n\nTherefore, the voltage gain of the input transistor $M_1$ is:\n$$A_{v1} \\approx -g_{m1} \\times \\left(\\frac{1}{g_{m2}}\\right)$$\n\nAssuming the two transistors are matched ($g_{m1} = g_{m2}$), **the voltage gain of $M_1$ is just $-1$.**\n\n#### B. Plugging the new gain into the Miller Formula\nNow, let's recalculate the Miller capacitance at the input of $M_1$ with a voltage gain of $-1$:\n\n$$C_{Miller} = C_{gd} \\times (1 + |-1|) = 2C_{gd}$$\n\nInstead of $C_{gd}$ being multiplied by 101 (as in a standard amplifier), **it is only multiplied by 2**. By keeping the Drain voltage of $M_1$ almost completely stationary, the Miller effect is essentially neutralized, preserving the amplifier's high-frequency bandwidth.\n\n---\n\n### 3. Wait—If the gain is -1, how does the Cascode amplify anything?\nIt is natural to wonder how the circuit achieves high overall voltage gain if the first stage only has a gain of $-1$. \n\nHere is how the signal survives:\n1. **$M_1$ acts as a voltage-to-current converter:** Even though the *voltage* at the Drain of $M_1$ barely moves, $M_1$ still generates a large AC signal *current* ($I_d = g_{m1} V_{in}$). \n2. **$M_2$ acts as a current buffer:** $M_2$ takes that AC current from $M_1$ and passes it straight through to the final load resistor ($R_D$) connected to the top of $M_2$. \n3. **High gain happens at the top:** Because $R_D$ is large, when the current hits it, a massive voltage swing occurs at the Drain of $M_2$. Thus, the *overall* voltage gain of the cascode remains very high ($A_{v\\_total} \\approx -g_{m1} R_D$).\n\n**Why doesn't $M_2$ suffer from the Miller effect?** \nBecause $M_2$ is a Common-Gate stage. Its Gate is tied to a steady DC bias voltage (which acts as an AC ground). Therefore, its parasitic capacitance ($C_{gd2}$) is just connected between the output and ground. It does not bridge an inverting input and output, so no Miller multiplication occurs.\n\n### Summary\nThe cascode reduces the Miller effect by **isolating the input from the output**. The top transistor ($M_2$) provides a very low-impedance load to the bottom transistor ($M_1$), which locks the Drain voltage of $M_1$ in place. Because the voltage at $M_1$'s drain cannot swing wildly, the parasitic capacitance $C_{gd}$ is not multiplied, and high-frequency performance is saved.",
        "format": "markdown",
        "sha256": "7b42917f916da7462054337e5bb8f975beb9cfb9bc1792976f538c00c4e2efea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2 presents a low impedance at M1’s drain, limiting the gain across Cgd1 to about −1 and its Miller multiplication to roughly 2. The claims that the drain is nearly stationary or the effect is essentially neutralized overstate the reduction, but this is a minor flaw under the golden solution.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 44,
        "output_tokens": 2770,
        "total_tokens": 2814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1447,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 44,
        "output_tokens": 2770,
        "total_tokens": 2814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1447,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the Miller effect is significantly reduced in a cascode amplifier, we first need to look at what causes the Miller effect in a standard single-transistor amplifier, and then see how the cascode topology changes the circuit’s physics.\n\n *(Note: I will use MOSFET terminology—Gate, Drain, Source—for this explanation, though the exact same principles apply to BJTs using Base, Collector, and Emitter).*\n\n### 1. The Problem: The Miller Effect\nIn a standard Common-Source (CS) amplifier, there is a small, unavoidable parasitic capacitance bridging the input (Gate) and the output (Drain), known as the gate-drain capacitance ($C_{gd}$). \n\nBecause a CS amplifier is an inverting amplifier with a large voltage gain ($-A_v$), a small positive voltage change at the Gate results in a large negative voltage change at the Drain. This creates a massive voltage difference across $C_{gd}$, pulling a large amount of current from the input source. \n\nTo the input source, it feels like it is driving a much larger capacitor than $C_{gd}$ actually is. This effective input capacitance is defined by the Miller equation:\n$$C_{Miller} = C_{gd}(1 + |A_v|)$$\n\nIf your amplifier has a voltage gain of 100, that tiny $C_{gd}$ suddenly looks 101 times larger at the input. This large capacitance reacts with the input source resistance to create a low-pass filter, severely limiting the high-frequency bandwidth of the amplifier.\n\n### 2. The Solution: The Cascode Topology\nA cascode amplifier consists of two transistors stacked in series:\n1. **The Bottom Transistor ($M_1$):** A Common-Source (CS) stage that receives the input signal at its Gate.\n2. **The Top Transistor ($M_2$):** A Common-Gate (CG) stage stacked right on top of $M_1$. The Source of $M_2$ is connected to the Drain of $M_1$. The Gate of $M_2$ is tied to a fixed DC bias voltage (which acts as an AC ground).\n\n### 3. Why the Miller Effect Disappears\nTo eliminate the Miller effect on the input transistor ($M_1$), we must look at the Miller equation: $C_{Miller} = C_{gd}(1 + |A_v|)$. Since we cannot change the physical $C_{gd}$ of the transistor, **our only option is to reduce the voltage gain ($A_v$) of $M_1$.**\n\nThis is exactly what the top transistor ($M_2$) does, through the following mechanism:\n\n* **Low Load Impedance for $M_1$:** The voltage gain of $M_1$ is determined by its transconductance ($g_{m1}$) multiplied by the resistance seen at its Drain ($R_{load}$). In a cascode, $M_1$ looks straight into the Source of $M_2$. The impedance looking into the Source of a MOSFET is very low—approximately $1/g_{m2}$.\n* **Gain Drops to Unity:** We can now calculate the voltage gain of the input transistor $M_1$:\n  $$A_{v1} = -g_{m1} \\times R_{load} = -g_{m1} \\times \\left(\\frac{1}{g_{m2}}\\right)$$\n  Assuming the two transistors are matched ($g_{m1} = g_{m2}$), the equation simplifies to:\n  $$A_{v1} \\approx -1$$\n* **Recalculating the Miller Capacitance:** If we plug this new gain of $-1$ into the Miller equation for the input transistor:\n  $$C_{Miller} = C_{gd}(1 + |-1|) = 2C_{gd}$$\n\nBy adding the cascode transistor, the effective input capacitance drops from **$101 \\cdot C_{gd}$** down to just **$2 \\cdot C_{gd}$**. \n\nIntuitively, the top transistor ($M_2$) acts as a voltage shield. It holds the Drain of $M_1$ at a nearly constant voltage, preventing the large voltage swings across $C_{gd}$ that cause the Miller effect in the first place.\n\n### 4. Wait—If the gain is -1, how does the circuit amplify?\nIt is easy to wonder how the cascode is useful if we just killed the voltage gain of the input transistor. \n\nWhile $M_1$ no longer provides *voltage* gain, it still provides *current* gain. $M_1$ converts the input voltage into a signal current ($i_d = g_{m1}v_{in}$). \n\nThe top transistor ($M_2$) simply acts as a current buffer. It takes that signal current from $M_1$ and passes it directly up to the main load resistor ($R_D$) connected to the top of the circuit. The high voltage gain happens at the Drain of $M_2$, where the current hits the large load resistor ($A_{total} = -g_{m1}R_D$). \n\n### 5. Doesn't the top transistor suffer from the Miller Effect?\nNo. Even though the Drain of $M_2$ experiences the massive output voltage swing, its Gate is connected to a fixed DC voltage (AC ground). Therefore, the $C_{gd}$ of $M_2$ is simply connected between the output and ground. It is not bridging an input and an output, so it does not get multiplied by any gain.\n\n### Summary\nThe Miller effect is less pronounced in a cascode because **the top transistor presents a very low impedance to the bottom transistor, reducing the bottom transistor's voltage gain to roughly -1.** Without a large voltage gain across the input transistor, its gate-drain capacitance is not multiplied, preserving the high-frequency bandwidth of the amplifier while shifting the actual voltage amplification to the isolated upper stage.",
        "format": "markdown",
        "sha256": "d75a92f3746cb9339e9352b0beed64b93e3b5b19f9ebffd10b590f8b38f7d462"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance node at M1’s drain and derives a local gain near −1, so Cgd1 is multiplied by about 2 rather than the full-stage gain. The language suggesting the effect disappears or the node is nearly constant slightly overstates the reduction, but the answer gives the correct 2Cgd result.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 44,
        "output_tokens": 2894,
        "total_tokens": 2938,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1622,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 44,
        "output_tokens": 2894,
        "total_tokens": 2938,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1622,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the Miller effect is significantly reduced in a cascode amplifier, we first need to look at what causes the Miller effect, and then see how the cascode topology disrupts it. \n\n*(Note: I will use MOSFET terminology—Gate, Source, Drain—for this explanation, but the exact same principles apply to BJTs using Base, Emitter, and Collector).*\n\n---\n\n### 1. The Culprit: What causes the Miller Effect?\nIn a standard Common-Source (CS) amplifier, there is a small, unavoidable parasitic capacitance between the input (Gate) and the output (Drain), known as **$C_{gd}$** (Gate-Drain capacitance).\n\nBecause the CS amplifier is an inverting amplifier, when the input voltage goes **up** by a small amount, the output voltage goes **down** by a large amount (determined by the voltage gain, $A_v$). \n\nThis large voltage swing in the opposite direction across $C_{gd}$ forces a large amount of current to flow into the capacitor. To the input signal, this makes the tiny $C_{gd}$ look massive. By Miller’s Theorem, the effective input capacitance becomes:\n\n$$C_{Miller} = C_{gd} (1 + |A_v|)$$\n\nIf your amplifier has a voltage gain ($A_v$) of 100, the parasitic capacitance is multiplied by 101. This huge capacitance acts as a low-pass filter with the input source resistance, severely limiting the high-frequency bandwidth of the amplifier. **Therefore, high voltage gain between the Gate and Drain is the root cause of the Miller effect.**\n\n---\n\n### 2. The Solution: How the Cascode Fixes It\nA cascode amplifier consists of two transistors stacked on top of each other:\n1. **The Bottom Transistor ($M_1$):** Configured as a Common-Source (CS) stage. This is the input.\n2. **The Top Transistor ($M_2$):** Configured as a Common-Gate (CG) stage. Its gate is tied to a fixed DC voltage (which acts as an AC ground). \n\nHere is why this configuration kills the Miller effect:\n\n#### A. It drastically reduces the load resistance of the input transistor\nIn a standard amplifier, the drain of $M_1$ is connected to a large load resistor ($R_L$) to get high gain. In a cascode, the drain of $M_1$ is connected directly to the **source of $M_2$**. \n\nLooking into the source of a Common-Gate transistor ($M_2$), the input impedance is very low—approximately **$1/g_{m2}$** (where $g_m$ is the transconductance).\n\n#### B. It drops the voltage gain of the input stage to ~1\nThe voltage gain of the bottom transistor ($M_1$) is determined by its transconductance multiplied by the load it sees:\n$$A_{v1} = -g_{m1} \\times R_{load}$$\n\nSince the load is just the source of $M_2$ ($1/g_{m2}$), the gain of the first stage becomes:\n$$A_{v1} = -g_{m1} \\times \\frac{1}{g_{m2}}$$\n\nAssuming the two transistors are sized similarly ($g_{m1} \\approx g_{m2}$), the voltage gain of the input transistor is:\n$$A_{v1} \\approx -1$$\n\n#### C. The Miller multiplication disappears\nNow, let's plug this new gain of 1 back into the Miller equation for the input transistor:\n$$C_{Miller} = C_{gd1} (1 + |-1|) = 2C_{gd1}$$\n\nInstead of $C_{gd}$ being multiplied by 101 (as in a standard amplifier), **it is only multiplied by 2.** \n\n---\n\n### 3. Wait—if the gain is 1, how does the Cascode amplify?\nThis is the magic of the cascode. It separates **current amplification** from **voltage amplification**.\n\n1. **$M_1$ (Input)** takes the input voltage and converts it into a current ($I = g_{m1}V_{in}$). Because its drain voltage barely moves (gain of -1), there is no Miller effect.\n2. **$M_2$ (Cascode)** takes that current into its source and passes it straight out of its drain to the final, large load resistor ($R_L$). \n3. The huge voltage swing happens at the **Drain of $M_2$**, resulting in a high overall voltage gain ($A_{v(total)} = -g_{m1}R_L$).\n\n**What about the Miller effect on the top transistor ($M_2$)?**\n$M_2$ does not suffer from the Miller effect because its Gate is tied to a fixed DC voltage (AC ground). The capacitance between its Drain and Gate ($C_{gd2}$) is simply connected between the output and ground, so it is not multiplied by any gain.\n\n### Summary\nThe cascode reduces the Miller effect by using a second transistor to \"shield\" the input transistor from the high voltage swings at the output. By holding the drain voltage of the input transistor nearly constant, the voltage gain across the critical Gate-Drain capacitor drops to unity, reducing the Miller capacitance to a negligible level and drastically increasing the amplifier's bandwidth.",
        "format": "markdown",
        "sha256": "e871dd90b1b590ab834fd7435b439e17294f223b9e1fa4481970e1e8fc88d149"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the low-impedance cascode node, the roughly −1 gain from M1’s gate to drain, and the resulting 2× Cgd1 multiplication rather than multiplication by the full stage gain. However, it repeatedly describes the Miller effect as eliminated or negligible; Cgd1 still sees about twice the input swing, so that overstates the reduction.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 44,
        "output_tokens": 2518,
        "total_tokens": 2562,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 44,
        "output_tokens": 2518,
        "total_tokens": 2562,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Identification & Key Observation\n\nLooking at the schematic symbols (where the arrow on the source terminal points **toward** the gate):\n* **$M_1$ is a PMOS transistor** with its source connected to $V_{DD}$, gate biased at $V_{b2}$, and drain connected to $V_{\\text{out}}$.\n* **$M_2$ is a PMOS transistor** with its arrow (source) connected to $V_{\\text{in}}$, gate biased at $V_{\\text{b1}}$, and drain connected to $V_{\\text{out}}$.\n\nDepending on the context of your course or textbook (this diagram style is from Behzad Razavi's *Design of Analog CMOS Integrated Circuits* / *Fundamentals of Microelectronics*), this circuit is analyzed in one of two ways:\n1. **Standard Small-Signal Analysis (Common-Gate Stage with Current-Source Load):** Assuming the circuit is properly biased in saturation as a **Common-Gate (CG) amplifier** ($M_2$) loaded by a **current source** ($M_1$).\n2. **DC Bias / \"What is Wrong with This Circuit?\" Analysis:** Identifying the **Kirchhoff's Current Law (KCL) violation** caused by connecting two PMOS drains together with both sources pushing DC current into $V_{\\text{out}}$.\n\nBelow is the complete analysis for **both** perspectives.\n\n---\n\n### 2. Part A: Standard Small-Signal Analysis (Common-Gate Amplifier)\n\nAssuming both transistors are biased in saturation with $M_2$ acting as a **Common-Gate (CG) input stage** (input applied to the source of $M_2$, gate at AC ground $V_{\\text{b1}}$) and $M_1$ acting as an **active current-source load** (gate at AC ground $V_{b2}$):\n\n#### **1. Small-Signal Model Parameters**\n* **$M_1$ (Current-Source Load):** Since $V_{SG1} = V_{DD} - V_{b2}$ is constant ($v_{sg1} = 0$), $M_1$ simply acts as its small-signal output resistance:\n  $$R_{\\text{load}} = r_{o1}$$\n* **$M_2$ (Common-Gate Transistor):** Driven at its source by $v_{\\text{in}}$ with its gate at AC ground ($v_{g2} = 0$). Both the main transconductance $g_{m2}$ and body-effect transconductance $g_{mb2}$ are active.\n\n---\n\n#### **2. Small-Signal Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)**\n\n* **Case 1: Neglecting channel-length modulation in $M_2$ ($\\lambda_2 = 0$, $r_{o2} \\to \\infty$):**\n  A small-signal input $v_{\\text{in}}$ at the source of $M_2$ produces a drain current of $(g_{m2} + g_{mb2})v_{\\text{in}}$ flowing into node $V_{\\text{out}}$:\n  $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = (g_{m2} + g_{mb2}) r_{o1}$$\n\n* **Case 2: Including channel-length modulation in both transistors ($\\lambda_1, \\lambda_2 > 0$):**\n  Writing KCL at node $V_{\\text{out}}$:\n  $$\\frac{v_{\\text{out}}}{r_{o1}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_{o2}} - (g_{m2} + g_{mb2})v_{\\text{in}} = 0$$\n  Solving for $\\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n  $$A_v = \\frac{1 + (g_{m2} + g_{mb2}) r_{o2}}{r_{o1} + r_{o2}} \\, r_{o1} = \\left(g_{m2} + g_{mb2} + \\frac{1}{r_{o2}}\\right)(r_{o1} \\parallel r_{o2})$$\n\n*(Note: Like all Common-Gate stages, the voltage gain is **non-inverting / positive**).*\n\n---\n\n#### **3. Input Resistance ($R_{\\text{in}}$)**\n\nLooking into the source terminal of $M_2$ with load resistance $r_{o1}$ connected from its drain to AC ground:\n* **With channel-length modulation ($\\lambda_1, \\lambda_2 > 0$):**\n  $$R_{\\text{in}} = \\frac{r_{o1} + r_{o2}}{1 + (g_{m2} + g_{mb2}) r_{o2}} \\approx \\frac{1}{g_{m2} + g_{mb2}} \\left(1 + \\frac{r_{o1}}{r_{o2}}\\right)$$\n* **Neglecting channel-length modulation in $M_2$ ($\\lambda_2 = 0$):**\n  $$R_{\\text{in}} = \\frac{1}{g_{m2} + g_{mb2}}$$\n\n---\n\n#### **4. Output Resistance ($R_{\\text{out}}$)**\n\nSetting the independent input voltage source to zero ($v_{\\text{in}} = 0$, which grounds the source of $M_2$):\n* Since $v_{gs2} = 0$ and $v_{bs2} = 0$, the dependent current sources of $M_2$ are inactive, leaving $r_{o2}$ in parallel with $r_{o1}$:\n  $$R_{\\text{out}} = r_{o1} \\parallel r_{o2}$$\n* *(If the input source $V_{\\text{in}}$ has a finite series resistance $R_S$, the output resistance increases to $R_{\\text{out}} = r_{o1} \\parallel \\left[ r_{o2}\\big(1 + (g_{m2} + g_{mb2})R_S\\big) + R_S \\right]$).*\n\n---\n\n### 3. Part B: Strict Physical / DC Bias Analysis (\"What is Wrong with This Circuit?\")\n\nIf this problem asks you to find the **flaw** in the schematic or analyze its true DC behavior as drawn:\n\n#### **1. The KCL Contradiction at Node $V_{\\text{out}}$**\n* In a PMOS transistor operating normally, DC current flows **from Source to Drain** ($I_{SD} > 0$).\n* For **$M_1$** (PMOS), the source is at $V_{DD}$, so its drain current $I_{D1}$ flows **downward into node $V_{\\text{out}}$**.\n* For **$M_2$** (PMOS), the schematic arrow defines the left terminal ($V_{\\text{in}}$) as the source, meaning its drain current $I_{D2}$ flows **from left to right into node $V_{\\text{out}}$**.\n* By Kirchhoff's Current Law (KCL) at node $V_{\\text{out}}$:\n  $$I_{D1} + I_{D2} = 0$$\n  Because there is no DC path for current to leave node $V_{\\text{out}}$ to ground, **both transistors cannot simultaneously conduct normal source-to-drain current** as drawn. *(To properly bias a PMOS Common-Gate stage $M_2$, the load $M_1$ would need to be an NMOS current sink connected to ground, or $M_2$ would need to be an NMOS transistor).*\n\n---\n\n#### **2. What Actually Happens Physically (Source/Drain Reversal)**\nBecause a MOSFET is physically a **symmetric device**, the terminal at the **higher voltage** automatically acts as the true **source** of a PMOS transistor:\n\n1. **If $V_{DD} > V_{\\text{out}} > V_{\\text{in}}$:**\n   * Current flows from $V_{DD}$ down through $M_1$ and then from right to left through $M_2$ into $V_{\\text{in}}$.\n   * Because $V_{\\text{out}} > V_{\\text{in}}$, the **right terminal ($V_{\\text{out}}$) becomes the actual source of $M_2$**, and the **left terminal ($V_{\\text{in}}$) becomes the actual drain of $M_2$**!\n   * **Small-Signal Consequence:** Since the input signal $V_{\\text{in}}$ is now driving the **drain** of $M_2$ rather than its source, $M_2$ acts as a cascode/source-follower node biased by $M_1$. Writing KCL at $V_{\\text{out}}$ (the actual source of $M_2$):\n     $$-\\frac{v_{\\text{out}}}{r_{o1}} = (g_{m2} + g_{mb2})v_{\\text{out}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_{o2}}$$\n     Solving for the voltage gain:\n     $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{\\frac{1}{r_{o2}}}{g_{m2} + g_{mb2} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} \\approx \\frac{1}{(g_{m2} + g_{mb2})r_{o2}} \\ll 1$$\n     *(And if $\\lambda_2 = 0$, the voltage gain is $A_v = 0$ because varying the drain voltage $V_{\\text{in}}$ of a saturated MOSFET does not change its current).*\n\n2. **If $V_{\\text{in}}$ and $V_{DD}$ both try to source current into $V_{\\text{out}}$:**\n   * Node $V_{\\text{out}}$ will charge up toward $V_{DD}$ (or $V_{\\text{in}}$), pushing $M_1$ (or $M_2$) out of saturation into the **triode** or **cutoff** region until KCL ($I_{D1} + I_{D2} = 0$) is satisfied.\n\n---\n\n### Summary Table\n\n| Parameter | Intended CG Amplifier ($\\lambda_1, \\lambda_2 > 0$) | Intended CG Amplifier ($\\lambda_2 = 0$) | True Physical Behavior ($V_{DD} > V_{\\text{out}} > V_{\\text{in}}$) |\n| :--- | :--- | :--- | :--- |\n| **Topology** | Common-Gate ($M_2$) with Current-Source Load ($M_1$) | Common-Gate ($M_2$) with Current-Source Load ($M_1$) | $V_{\\text{out}}$ acts as Source of $M_2$; $V_{\\text{in}}$ acts as Drain of $M_2$ |\n| **Voltage Gain ($A_v$)** | $\\dfrac{1 + (g_{m2} + g_{mb2})r_{o2}}{r_{o1} + r_{o2}} \\, r_{o1}$ | $(g_{m2} + g_{mb2})r_{o1}$ | $\\dfrac{1}{(g_{m2} + g_{mb2})r_{o2} + 1 + \\frac{r_{o2}}{r_{o1}}} \\approx 0$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\dfrac{r_{o1} + r_{o2}}{1 + (g_{m2} + g_{mb2})r_{o2}}$ | $\\dfrac{1}{g_{m2} + g_{mb2}}$ | $r_{o2}\\big(1 + (g_{m2} + g_{mb2})r_{o1}\\big) + r_{o1}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $r_{o1} \\parallel r_{o2}$ | $r_{o1}$ | $\\dfrac{1}{g_{m2} + g_{mb2}} \\parallel r_{o1} \\parallel r_{o2}$ |",
        "format": "markdown",
        "sha256": "f5aa0f0e01d4bcb58a96e52e6ef95b86e7529b049ebb288b96ae543383356695"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the intended common-gate stage’s non-inverting gain and low input resistance with essentially the correct gain expression. But it misidentifies M2 as PMOS and builds a false KCL/impossible-bias analysis on that error, contradicting the actual NMOS-with-PMOS-load circuit.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 6861,
        "total_tokens": 8004,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4152,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 6861,
        "total_tokens": 8004,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4152,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Below is a complete analysis of the circuit, covering its **topology**, **small-signal AC performance** (assuming active/saturation operation, as is standard in textbook exercises), and **DC biasing considerations**.\n\n---\n\n### 1. Circuit Topology and Identification\nThe circuit consists of two **PMOS** transistors connected at the output node $V_{\\text{out}}$:\n* **$M_1$ (Current-Source Load):** A PMOS transistor with its source tied to $V_{DD}$ and its gate biased at a constant DC voltage $V_{b2}$. Because its source-gate voltage is fixed ($V_{SG1} = V_{DD} - V_{b2}$), $M_1$ functions as a constant-current source (active load) presenting a high small-signal output resistance $r_{o1}$.\n* **$M_2$ (Common-Gate Stage):** A PMOS transistor with the input signal $V_{\\text{in}}$ applied to its **source**, its **gate** tied to a constant DC bias voltage $V_{b1}$ (AC ground), and the output $V_{\\text{out}}$ taken from its **drain**. This is a **Common-Gate (CG)** amplifier configuration.\n\n---\n\n### 2. Small-Signal AC Analysis\n*(Assuming both transistors are biased in the saturation region)*\n\nIn the small-signal model, the DC voltages $V_{DD}$, $V_{b1}$, and $V_{b2}$ are replaced by AC ground. \n* Since $v_{sg1} = 0$, transistor $M_1$ simply acts as a passive resistor of value $r_{o1}$ connected between $V_{\\text{out}}$ and AC ground.\n\n#### A. Output Resistance ($R_{\\text{out}}$)\nTo find $R_{\\text{out}}$, we set the independent input voltage source to zero ($v_{\\text{in}} = 0$) and look into the $V_{\\text{out}}$ node:\n* Setting $v_{\\text{in}} = 0$ grounds the source of $M_2$. Since the gate of $M_2$ is also at AC ground ($V_{b1}$), we have $v_{sg2} = 0$ and $v_{sb2} = 0$.\n* Thus, the dependent current sources of $M_2$ are inactive, and looking into the drain of $M_2$ we simply see its output resistance $r_{o2}$.\n* Combining the drain of $M_2$ in parallel with the drain of $M_1$:\n$$R_{\\text{out}} = r_{o1} \\parallel r_{o2} = \\frac{r_{o1} r_{o2}}{r_{o1} + r_{o2}}$$\n\n#### B. Voltage Gain ($A_v$)\nApplying a small-signal voltage $v_{\\text{in}}$ at the source of $M_2$, the current flowing out of $V_{\\text{out}}$ into $r_{o1}$ must equal the current flowing through $M_2$. Using Kirchhoff's Current Law (KCL) at node $V_{\\text{out}}$:\n$$\\frac{v_{\\text{out}}}{r_{o1}} = (g_{m2} + g_{mb2})v_{\\text{in}} + \\frac{v_{\\text{in}} - v_{\\text{out}}}{r_{o2}}$$\n\nGrouping the $v_{\\text{out}}$ and $v_{\\text{in}}$ terms:\n$$v_{\\text{out}} \\left( \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}} \\right) = v_{\\text{in}} \\left( g_{m2} + g_{mb2} + \\frac{1}{r_{o2}} \\right)$$\n\nSolving for the exact voltage gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n$$A_v = \\left( g_{m2} + g_{mb2} + \\frac{1}{r_{o2}} \\right) (r_{o1} \\parallel r_{o2}) = \\frac{\\big[(g_{m2} + g_{mb2})r_{o2} + 1\\big] r_{o1}}{r_{o1} + r_{o2}}$$\n\n* **Approximation (if $(g_{m2} + g_{mb2})r_{o2} \\gg 1$ and neglecting body effect $g_{mb2} = 0$):**\n$$A_v \\approx g_{m2} (r_{o1} \\parallel r_{o2})$$\n*(Note: As expected for a common-gate stage, the voltage gain is **positive / non-inverting**.)*\n\n#### C. Input Resistance ($R_{\\text{in}}$)\nLooking into the source of $M_2$ while its drain is loaded by $R_D = r_{o1}$, the input resistance is given by the standard CG input impedance formula with finite $r_o$:\n$$R_{\\text{in}} = \\frac{r_{o1} + r_{o2}}{1 + (g_{m2} + g_{mb2})r_{o2}}$$\n\n* **Approximation (neglecting channel-length modulation, $r_o \\to \\infty$):**\n$$R_{\\text{in}} \\approx \\frac{1}{g_{m2} + g_{mb2}}$$\n\n---\n\n### 3. DC Biasing Analysis (Important Practical Catch)\nIf this problem asks *\"What is wrong with this circuit at DC?\"* or asks for a large-signal analysis, there is a critical DC current conflict as drawn:\n\n1. **KCL Conflict at $V_{\\text{out}}$:**\n   * Both $M_1$ and $M_2$ are drawn as **PMOS** devices with their sources at $V_{DD}$ and $V_{\\text{in}}$, respectively, and their drains tied together at $V_{\\text{out}}$.\n   * For a PMOS transistor in normal saturation, DC current must flow **out of the drain** (from source to drain).\n   * This means both $M_1$ and $M_2$ attempt to push DC current **into** node $V_{\\text{out}}$ ($I_{D1} + I_{D2} = 0$). Without an external DC current sink connected to $V_{\\text{out}}$, **both transistors cannot simultaneously operate in saturation** with the terminal polarities shown.\n\n2. **What Actually Happens at DC:**\n   * **Case 1 ($V_{\\text{in}}$ is lower than $V_{\\text{out}}$):** Because a MOSFET is physically symmetric, the terminal at the higher potential acts as the true source. If $V_{\\text{out}} > V_{\\text{in}}$, the terminal of $M_2$ connected to $V_{\\text{out}}$ becomes its **actual source**, and the $V_{\\text{in}}$ terminal becomes its **drain**. DC current then flows from $V_{DD}$ down through $M_1$ and exits into $V_{\\text{in}}$.\n   * **Case 2 ($V_{\\text{in}}$ is fixed high, near $V_{DD}$):** Node $V_{\\text{out}}$ pulls up close to $V_{DD}$ (or $V_{\\text{in}}$), forcing $M_1$ and/or $M_2$ deep into the **triode (linear) region** so that current can flow backward into $V_{DD}$ or $V_{\\text{in}}$.\n   * **How to fix the circuit for proper CG saturation operation:** Either replace $M_2$ with an **NMOS** transistor (or replace $M_1$ with an **NMOS** current sink tied to ground), or connect a DC current sink from $V_{\\text{out}}$ to ground.",
        "format": "markdown",
        "sha256": "8b94bc11f4b648fbb85547d61fe450c8447f493747b2e140eae392dcbe81b300"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the common-gate connection, source-driven input, non-inverting gain, and gives the correct gain and input-resistance formulas. But it misidentifies M2 as a PMOS and consequently invents a DC-bias conflict and says the circuit needs fixing; that is a significant device-level error.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 5485,
        "total_tokens": 6628,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 5485,
        "total_tokens": 6628,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete analysis of the circuit, covering its topology, small-signal parameters (voltage gain, input impedance, and output impedance), and an important note regarding its DC biasing.\n\n---\n\n### 1. Circuit Identification & Topology\n* **$M_1$ (PMOS):** Acts as a **current-source load** (active load). Its source is tied to $V_{DD}$, its gate is tied to a constant DC bias voltage $V_{b2}$, and its drain is connected to the output node $V_{\\text{out}}$.\n* **$M_2$ (PMOS):** Configured as a **Common-Gate (CG) stage**. The input signal $V_{\\text{in}}$ is applied to the source terminal, the gate is held at a constant DC bias voltage $V_{b1}$ (AC ground), and the output $V_{\\text{out}}$ is taken at the drain terminal.\n\n*(Note: See Section 3 below regarding the DC current directions of $M_1$ and $M_2$, as NMOS and PMOS share the exact same small-signal equivalent circuit).*\n\n---\n\n### 2. Small-Signal Analysis\nAssuming both transistors are biased in the **saturation region**, we can replace each device with its small-signal equivalent model:\n\n* **For $M_1$:** Since both its gate ($V_{b2}$) and source ($V_{DD}$) are at AC ground, $v_{gs1} = 0$ and $v_{bs1} = 0$. Thus, the dependent current sources of $M_1$ are zero, and $M_1$ simplifies to a single resistor $r_{o1}$ connected between $V_{\\text{out}}$ and AC ground.\n* **For $M_2$:** The gate ($V_{b1}$) and bulk ($V_{DD}$) are at AC ground, while the source is driven by $v_{\\text{in}}$. Therefore:\n  $$v_{gs2} = 0 - v_{\\text{in}} = -v_{\\text{in}}$$\n  $$v_{bs2} = 0 - v_{\\text{in}} = -v_{\\text{in}} \\quad \\text{(assuming bulk is tied to } V_{DD}\\text{)}$$\n\n---\n\n#### A. Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)\nApplying Kirchhoff's Current Law (KCL) at the output node $V_{\\text{out}}$:\n$$\\frac{v_{\\text{out}}}{r_{o1}} + g_{m2}v_{gs2} + g_{mb2}v_{bs2} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_{o2}} = 0$$\n\nSubstitute $v_{gs2} = -v_{\\text{in}}$ and $v_{bs2} = -v_{\\text{in}}$:\n$$\\frac{v_{\\text{out}}}{r_{o1}} - (g_{m2} + g_{mb2})v_{\\text{in}} + \\frac{v_{\\text{out}} - v_{\\text{in}}}{r_{o2}} = 0$$\n\nGrouping the $v_{\\text{out}}$ and $v_{\\text{in}}$ terms:\n$$v_{\\text{out}}\\left(\\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}\\right) = v_{\\text{in}}\\left(g_{m2} + g_{mb2} + \\frac{1}{r_{o2}}\\right)$$\n\nSolving for the exact small-signal voltage gain $A_v$:\n$$\\mathbf{A_v = \\left(g_{m2} + g_{mb2} + \\frac{1}{r_{o2}}\\right)(r_{o1} \\parallel r_{o2})}$$\n\n* **Simplified Approximation:** If channel-length modulation is small ($g_{m2}r_{o2} \\gg 1$) and body effect is neglected ($g_{mb2} = 0$, e.g., if bulk is tied to source):\n  $$\\mathbf{A_v \\approx g_{m2}(r_{o1} \\parallel r_{o2})}$$\n*(Notice that the gain is **positive/non-inverting**, which is characteristic of a Common-Gate amplifier).*\n\n---\n\n#### B. Input Impedance ($R_{\\text{in}}$)\nLooking into the source terminal of $M_2$ with a load of $R_L = r_{o1}$ connected to its drain, the exact input resistance of a common-gate stage with finite output resistance is:\n$$\\mathbf{R_{\\text{in}} = \\frac{r_{o1} + r_{o2}}{1 + (g_{m2} + g_{mb2})r_{o2}}}$$\n\n* **Simplified Approximation:** If $r_{o1}, r_{o2} \\to \\infty$ (neglecting channel-length modulation $\\lambda$), note carefully that if $r_{o1} = \\infty$ (ideal current source load), no small-signal current can enter the source of $M_2$, making $R_{\\text{in}} = \\infty$. However, for finite $r_{o1}$ on the order of $r_{o2}$ with $(g_{m2} + g_{mb2})r_{o2} \\gg 1$:\n  $$R_{\\text{in}} \\approx \\frac{1}{g_{m2} + g_{mb2}}\\left(1 + \\frac{r_{o1}}{r_{o2}}\\right)$$\n  And if $r_{o2} \\to \\infty$ while treating the load separately as a general resistor $R_D \\ll r_{o2}$:\n  $$\\mathbf{R_{\\text{in}} \\approx \\frac{1}{g_{m2} + g_{mb2}} \\approx \\frac{1}{g_{m2}}}$$\n\n---\n\n#### C. Output Impedance ($R_{\\text{out}}$)\nTo find the output impedance looking into the $V_{\\text{out}}$ terminal, we set the independent input voltage source to zero ($v_{\\text{in}} = 0$, shorting the source of $M_2$ to AC ground):\n1. With the source and gate of $M_2$ both at AC ground, $v_{gs2} = 0$ and $v_{bs2} = 0$.\n2. Thus, looking down into the drain of $M_2$, we simply see its output resistance $r_{o2}$.\n3. Looking up into the drain of $M_1$, we see $r_{o1}$.\n\nCombining these two parallel paths to AC ground:\n$$\\mathbf{R_{\\text{out}} = r_{o1} \\parallel r_{o2}}$$\n\n*(Note: If the input source $V_{\\text{in}}$ has a finite series resistance $R_S$, the resistance looking into the drain of $M_2$ increases due to source degeneration to $R_{\\text{out2}} = r_{o2} + [1 + (g_{m2} + g_{mb2})r_{o2}]R_S$, giving $R_{\\text{out}} = r_{o1} \\parallel R_{\\text{out2}}$).*\n\n---\n\n### 3. Important Engineering Note on DC Biasing (KCL Check)\nIf this question includes checking whether the circuit is **biasable as drawn**:\n* Both $M_1$ and $M_2$ are drawn with PMOS symbols (the arrow on the source terminal points *toward* the gate).\n* In a PMOS transistor, DC current flows from the **source** (arrow terminal) to the **drain**.\n* As drawn, $M_1$ sources DC current from $V_{DD}$ **into** $V_{\\text{out}}$, and $M_2$ also has its source arrow at $V_{\\text{in}}$, implying it would also source DC current **into** $V_{\\text{out}}$.\n* By Kirchhoff's Current Law (KCL), two positive currents cannot both enter the unloaded $V_{\\text{out}}$ node with no DC path to leave.\n\n**Conclusion on DC Operation:**\n1. **If this is a textbook/illustration typo:** $M_2$ was likely intended to be an **NMOS** transistor (arrow pointing outward at $V_{\\text{in}}$) sinking current to $V_{\\text{in}}$. Because NMOS and PMOS small-signal models are identical, **all small-signal equations derived in Section 2 remain 100% identical**.\n2. **If the schematic is literal (trick question):** Because a MOSFET is physically symmetric, for DC current to flow from $V_{DD}$ to $V_{\\text{in}}$ (where $V_{\\text{in}} < V_{DD}$), the terminal of $M_2$ connected to $V_{\\text{out}}$ is at a higher potential than $V_{\\text{in}}$ and therefore acts as the *true physical source* of $M_2$, while the $V_{\\text{in}}$ terminal acts as the *drain*. In that scenario, $M_2$ is actually being driven at its drain rather than its source!",
        "format": "markdown",
        "sha256": "4abbc170c9e09953d137d901890529ea4e39fd566dc688d6245330e42abc8e59"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The common-gate source-driven analysis, non-inverting gain, gain expression, and low input resistance are essentially correct. However, it misidentifies M2 as PMOS and adds a false DC-bias objection; the actual stage uses an NMOS M2.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 6898,
        "total_tokens": 8041,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4873,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 6898,
        "total_tokens": 8041,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4873,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**. \n\nHere are two standard ways to determine this:\n\n---\n\n### Method 1: Counting Independent Capacitive Nodes\nIn a circuit without inductors, the number of poles is normally equal to the number of independent nodes that have a capacitive path to ground (excluding the ideal input voltage source node):\n\n1. **Node 1 (Gate of $M_1$):** Connected to ground through $C_{\\text{GS}}$ (and coupled to the output via $C_{\\text{GD}}$).\n2. **Node 2 (Output node $V_{\\text{out}}$):** Connected to ground through three parallel capacitors ($C_{\\text{DB}}$, $C_{\\text{GD2}}$, and $C_{\\text{DB2}}$).\n\nSince there are only **2** such nodes in the signal path, the transfer function $\\frac{V_{\\text{out}}}{V_{\\text{in}}}(s)$ can only have **2 poles**.\n\n---\n\n### Method 2: Counting Capacitors and Capacitive Loops\nThe number of poles is equal to the number of independent capacitor voltages, which is given by:\n$$\\text{Number of Poles} = (\\text{Number of Equivalent Capacitors}) - (\\text{Number of Capacitive Loops})$$\n\n1. **Combine parallel capacitors:** \n   At the output node ($V_{\\text{out}}$), the capacitors $C_{\\text{DB}}$, $C_{\\text{GD2}}$, and $C_{\\text{DB2}}$ are all connected between $V_{\\text{out}}$ and AC ground. Therefore, they combine in parallel into a single equivalent load capacitor:\n   $$C_{\\text{eq}} = C_{\\text{DB}} + C_{\\text{GD2}} + C_{\\text{DB2}}$$\n\n2. **Identify capacitive loops:** \n   We are left with 3 equivalent capacitors: $C_{\\text{GS}}$, $C_{\\text{GD}}$, and $C_{\\text{eq}}$. However, these three capacitors form a closed **capacitive loop** between the gate of $M_1$, the drain of $M_1$ ($V_{\\text{out}}$), and ground:\n   $$V_{C_{\\text{GS}}} - V_{C_{\\text{GD}}} - V_{C_{\\text{eq}}} = 0$$\n   Because of Kirchhoff's Voltage Law (KVL), the voltage across one capacitor is completely determined by the other two, meaning only 2 of them can have independent initial conditions.\n\n$$\\text{Number of Poles} = 3 - 1 = \\mathbf{2}$$",
        "format": "markdown",
        "sha256": "1af07f6d462b596c61fd62b0f2e49e7d49381105f5ea3a581ff56890c66b1ca1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles from the gate and output nodes, and assigns the capacitors to the correct nodes. The capacitive-loop explanation is also consistent with two independent capacitor voltages.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 3537,
        "total_tokens": 4662,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2982,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 3537,
        "total_tokens": 4662,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2982,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure has **2 poles**. \n\nYou can determine this using either of the following two standard circuit analysis methods:\n\n---\n\n### Method 1: Simplifying Capacitors and Counting Capacitive Loops\n\n1. **Combine parallel capacitors:** \n   Looking at the output node ($V_{\\text{out}}$), three capacitors—$C_{\\text{DB}}$, $C_{\\text{GD2}}$, and $C_{\\text{DB2}}$—are all connected directly between $V_{\\text{out}}$ and ground. Since they are in parallel, they act as a single equivalent output capacitance:\n   $$C_{\\text{eq}} = C_{\\text{DB}} + C_{\\text{GD2}} + C_{\\text{DB2}}$$\n\n2. **Identify capacitive loops:** \n   After combining the parallel capacitors, the circuit is reduced to **3 equivalent capacitors**:\n   * $C_{\\text{GS}}$ (between the gate of $M_1$ and ground)\n   * $C_{\\text{eq}}$ (between $V_{\\text{out}}$ and ground)\n   * $C_{\\text{GD}}$ (bridging the gate of $M_1$ and $V_{\\text{out}}$)\n\n   These three capacitors form a closed **capacitive loop** (Ground $\\rightarrow C_{\\text{GS}} \\rightarrow C_{\\text{GD}} \\rightarrow C_{\\text{eq}} \\rightarrow$ Ground). By Kirchhoff's Voltage Law (KVL), the voltage across one capacitor is always strictly determined by the other two:\n   $$V_{C_{\\text{GD}}} = V_{C_{\\text{GS}}} - V_{C_{\\text{eq}}}$$\n\n3. **Count independent state variables (poles):**\n   Because of this loop, only 2 capacitor voltages can vary independently:\n   $$\\text{Number of poles} = (\\text{Number of equivalent capacitors}) - (\\text{Number of capacitive loops}) = 3 - 1 = \\mathbf{2}$$\n\n---\n\n### Method 2: Counting Independent High-Impedance Nodes (Nodal Analysis)\n\nIn a circuit containing only resistors, capacitors, and controlled sources, the number of poles is generally equal to the number of independent AC nodes connected to capacitors:\n\n1. **Node 1:** The gate of $M_1$\n2. **Node 2:** The output node ($V_{\\text{out}}$)\n\n*(Note: All other terminals are connected either to AC ground or to the ideal input voltage source $V_{\\text{in}}$.)*\n\nWriting Kirchhoff's Current Law (KCL) at these **2 nodes** in the $s$-domain gives a system of two first-order equations in $s$. Solving for the transfer function $\\frac{V_{\\text{out}}}{V_{\\text{in}}}(s)$ produces a second-order denominator polynomial of the form $a s^2 + b s + 1$, confirming that the circuit has **2 poles** (along with 1 right-half-plane zero introduced by the feedforward path through $C_{\\text{GD}}$).",
        "format": "markdown",
        "sha256": "b41d0c1941ecb27195b5943c8cc639423de0c5153640e72f3c95956cd05202ff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent capacitive nodes—the M1 gate and output—and assigns the capacitors to the appropriate nodes. The capacitor-loop explanation supports the two-pole count; the additional zero detail does not detract.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 2378,
        "total_tokens": 3503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1718,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 2378,
        "total_tokens": 3503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1718,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**. \n\nEven though there are five capacitors shown in the schematic, they do not all produce independent poles. You can determine the exact number of poles using either of the two standard circuit analysis methods below:\n\n---\n\n### Method 1: Counting Independent Capacitive Loops (State Variables)\nThe number of poles in a circuit without inductors is equal to the number of independent capacitor voltages (state variables), which is given by:\n$$\\text{Number of Poles} = (\\text{Number of Capacitors}) - (\\text{Number of Capacitive Loops})$$\n\n1. **Combine parallel capacitors:** \n   Notice that $C_{\\text{DB}}$, $C_{\\text{GD2}}$, and $C_{\\text{DB2}}$ are all connected directly between the output node ($V_{\\text{out}}$) and AC ground. Because they are in parallel, they combine into a single equivalent load capacitance:\n   $$C_{\\text{eq}} = C_{\\text{DB}} + C_{\\text{GD2}} + C_{\\text{DB2}}$$\n\n2. **Identify remaining capacitive loops:** \n   After combining the output capacitors, the circuit is reduced to three capacitances: $C_{\\text{GS}}$, $C_{\\text{GD}}$, and $C_{\\text{eq}}$. These three capacitors form a closed $\\pi$-network (a purely capacitive loop) between the gate of $M_1$, the output node $V_{\\text{out}}$, and ground. \n   \n   By Kirchhoff's Voltage Law (KVL):\n   $$V_{C_{\\text{GS}}} - V_{C_{\\text{GD}}} - V_{C_{\\text{eq}}} = 0$$\n   Because fixing the voltage across any two of these capacitors automatically determines the voltage across the third, there are only **2 independent state variables**, resulting in a second-order denominator in the transfer function (**2 poles**).\n\n---\n\n### Method 2: Counting High-Impedance Small-Signal Nodes\nAs a rule of thumb in amplifier frequency-response analysis, each independent signal node (excluding ground and ideal voltage source nodes) with capacitance connected to it generally contributes one pole:\n\n1. **Input Node (Gate of $M_1$):** Associated with the input resistance $R_{\\text{S}}$, $C_{\\text{GS}}$, and the Miller effect of $C_{\\text{GD}}$ (contributes **1 pole**, typically the dominant pole if $R_{\\text{S}}$ is large).\n2. **Output Node ($V_{\\text{out}}$):** Associated with the output resistances of $M_1$ and $M_2$ ($r_{o1} \\parallel r_{o2}$) and the capacitances connected to the drain (contributes **1 pole**).\n\nSince there are only **2** such nodes in the circuit, the system has **2 poles** (along with **1 right-half-plane zero** created by the feedforward path through $C_{\\text{GD}}$).",
        "format": "markdown",
        "sha256": "d9beecb24467d5274ed42efe922b216557b5d58d2b1f6afd6fc007271f47fe52"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent capacitive nodes—the M1 gate and output—and assigns the capacitors to the appropriate nodes. The CGD coupling does not add a third pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 1980,
        "total_tokens": 3105,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1125,
        "output_tokens": 1980,
        "total_tokens": 3105,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete analysis of the circuit shown in the figure, broken down into **Large-Signal (DC) Behavior**, **Composite Transistor Equivalence**, and **Small-Signal (AC) Analysis**.\n\n---\n\n### 1. Circuit Overview\nThe circuit is a **Common-Source (CS) amplifier** with a resistive load ($R_D$), where the amplifying device consists of two series-connected (stacked) NMOS transistors, $M_1$ and $M_2$, whose gates are tied together to the same input voltage $V_{\\text{in}}$. This two-transistor structure is often referred to as a **composite transistor** or a **self-cascode** configuration.\n\n---\n\n### 2. Large-Signal (DC) Analysis & Regions of Operation\n\nLet $V_X$ be the voltage at the intermediate node between the drain of $M_1$ and the source of $M_2$. Assume both transistors have the same threshold voltage $V_{TH}$ (neglecting the body effect for simplicity).\n\nAs $V_{\\text{in}}$ increases from $0\\text{ V}$ to $V_{DD}$, the circuit passes through three distinct operating regimes:\n\n#### **Regime 1: Cutoff ($V_{\\text{in}} < V_{TH}$)**\n* Since $V_{GS1} = V_{\\text{in}} < V_{TH}$, transistor $M_1$ is **OFF**.\n* No drain current flows ($I_D = 0$), so $M_2$ is also **OFF**.\n* The output voltage is pulled entirely up to the supply:\n  $$V_{\\text{out}} = V_{DD}$$\n\n#### **Regime 2: $M_2$ in Saturation, $M_1$ in Triode ($V_{\\text{in}} > V_{TH}$ and $V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH}$)**\n* For $M_2$ to be ON and conducting current, its gate-source voltage must exceed $V_{TH}$:\n  $$V_{GS2} = V_{\\text{in}} - V_X > V_{TH} \\implies V_X < V_{\\text{in}} - V_{TH}$$\n* Now examine $M_1$. Its drain-source voltage is $V_{DS1} = V_X$, and its overdrive voltage is $V_{GS1} - V_{TH} = V_{\\text{in}} - V_{TH}$. \n* Since $V_X < V_{\\text{in}} - V_{TH}$, we always have:\n  $$V_{DS1} < V_{GS1} - V_{TH}$$\n  **Key Insight:** Whenever current flows in this circuit, **$M_1$ can never be in saturation; it is forced to operate in the Triode (Linear) region.**\n* Meanwhile, $M_2$ remains in **Saturation** as long as its drain-source voltage satisfies $V_{DS2} \\ge V_{GS2} - V_{TH}$:\n  $$V_{\\text{out}} - V_X \\ge (V_{\\text{in}} - V_X) - V_{TH} \\implies V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH}$$\n\n#### **Regime 3: Both $M_1$ and $M_2$ in Triode ($V_{\\text{out}} < V_{\\text{in}} - V_{TH}$)**\n* As $V_{\\text{in}}$ increases further, the current $I_D$ increases, causing $V_{\\text{out}} = V_{DD} - I_D R_D$ to drop.\n* Once $V_{\\text{out}}$ drops below $V_{\\text{in}} - V_{TH}$, $M_2$ leaves saturation and enters the **Triode** region alongside $M_1$.\n\n---\n\n### 3. Composite Transistor Equivalence (Neglecting $\\lambda$)\n\nWhen $M_2$ is in saturation and $M_1$ is in triode (Regime 2), the two stacked transistors behave mathematically like a **single NMOS transistor** in saturation.\n\n1. **Drain current of $M_1$ (Triode):**\n   $$I_{D1} = \\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 \\left[ 2(V_{\\text{in}} - V_{TH})V_X - V_X^2 \\right]$$\n   Using the algebraic identity $2AB - B^2 = A^2 - (A - B)^2$, we can rewrite the bracketed term as:\n   $$I_{D1} = \\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 \\left[ (V_{\\text{in}} - V_{TH})^2 - (V_{\\text{in}} - V_X - V_{TH})^2 \\right]$$\n\n2. **Drain current of $M_2$ (Saturation):**\n   $$I_{D2} = \\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{\\text{in}} - V_X - V_{TH})^2$$\n\n3. **Combining the equations ($I_{D1} = I_{D2} = I_D$):**\n   Solving for $(V_{\\text{in}} - V_X - V_{TH})^2$ from $I_{D2}$ and substituting it into $I_{D1}$ yields:\n   $$I_D = \\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_{\\text{eq}} (V_{\\text{in}} - V_{TH})^2$$\n   where the equivalent aspect ratio is the series combination:\n   $$\\left(\\frac{W}{L}\\right)_{\\text{eq}} = \\frac{(W/L)_1 (W/L)_2}{(W/L)_1 + (W/L)_2}$$\n\n> **Special Case:** If both transistors have the same width ($W_1 = W_2 = W$), then:\n> $$\\left(\\frac{W}{L}\\right)_{\\text{eq}} = \\frac{W}{L_1 + L_2}$$\n> That is, $M_1$ and $M_2$ simply act as a single transistor with an effective channel length of $L_{\\text{eq}} = L_1 + L_2$.\n\n---\n\n### 4. Small-Signal (AC) Analysis\n\nAssuming the circuit is biased in **Regime 2** ($M_2$ in saturation, $M_1$ in triode) to operate as an amplifier:\n\n#### **A. Small-Signal Model Parameters of $M_1$ (in Triode)**\nBecause $M_1$ is in the triode region, its drain current depends strongly on both $V_{GS1}$ and $V_{DS1}$:\n* Effective transconductance of $M_1$:\n  $$g_{m1} = \\frac{\\partial I_{D1}}{\\partial V_{GS1}} = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 V_X$$\n* Channel conductance (inverse of on-resistance $r_{o1}$) of $M_1$:\n  $$g_{ds1} = \\frac{1}{r_{o1}} = \\frac{\\partial I_{D1}}{\\partial V_{DS1}} = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH} - V_X)$$\n\n#### **B. Overall Transconductance ($G_m$)**\nSetting $v_{\\text{out}} = 0$ and ignoring channel-length modulation in $M_2$ ($r_{o2} \\to \\infty$):\n* The small-signal current through $M_1$ is:\n  $$i_d = g_{m1}v_{\\text{in}} + \\frac{v_x}{r_{o1}}$$\n* The small-signal current through $M_2$ is:\n  $$i_d = g_{m2}(v_{\\text{in}} - v_x)$$\n\nEquating the two currents to eliminate $v_x$ gives the overall transconductance $G_m = \\frac{i_d}{v_{\\text{in}}}$:\n$$G_m = \\frac{g_{m2}(g_{m1}r_{o1} + 1)}{g_{m2}r_{o1} + 1} = \\frac{g_{m2}(g_{m1} + g_{ds1})}{g_{m2} + g_{ds1}}$$\n\n*(Note: Using the composite transistor view from Section 3, this simplifies directly to $G_m = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_{\\text{eq}} (V_{\\text{in}} - V_{TH})$).*\n\n#### **C. Output Resistance ($R_{\\text{out}}$)**\nTo find $R_{\\text{out}}$, set the input signal to zero ($v_{\\text{in}} = 0$). \n* With its gate at AC ground, $M_1$ simply acts as a source-degeneration resistor of value $r_{o1}$ connected to the source of $M_2$.\n* Looking into the drain of $M_2$, the resistance is boosted by the cascode effect of $M_2$:\n  $$R_{d2} = r_{o2} + r_{o1} + (g_{m2} + g_{mb2}) r_{o2} r_{o1} = r_{o1} + r_{o2}\\left[1 + (g_{m2} + g_{mb2})r_{o1}\\right]$$\n* Including the drain resistor $R_D$, the total output resistance at $V_{\\text{out}}$ is:\n  $$R_{\\text{out}} = R_D \\parallel \\left( r_{o1} + r_{o2}\\left[1 + (g_{m2} + g_{mb2})r_{o1}\\right] \\right)$$\n\n#### **D. Small-Signal Voltage Gain ($A_v$)**\nCombining the overall transconductance and output resistance (assuming $r_{o2}$ is large enough that $R_{\\text{out}} \\approx R_D$):\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -G_m R_{\\text{out}} \\approx -\\frac{g_{m2}(g_{m1}r_{o1} + 1)}{g_{m2}r_{o1} + 1} R_D$$\n\n*(Or, if including finite $r_{o2}$ exactly)*:\n$$A_v = -\\frac{g_{m2}r_{o2}(g_{m1}r_{o1} + 1) + g_{m1}r_{o1}}{R_D + r_{o1} + r_{o2}\\left[1 + (g_{m2} + g_{mb2})r_{o1}\\right]} \\cdot \\frac{R_D}{1} \\approx -G_m \\left( R_D \\parallel R_{d2} \\right)$$",
        "format": "markdown",
        "sha256": "bf030869570a2584e7adfc1df9a8f1bbaff819432a44a4f33cf2c3ba8c8827b1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gated series NMOS stack, with M1 in triode and M2 in saturation, and derives the effective aspect ratio that gives L_eff ≈ L1 + L2 for equal widths. Its small-signal resistance model uses M1 as a triode resistance, consistent with the stated topology.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1151,
        "output_tokens": 5864,
        "total_tokens": 7015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3329,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1151,
        "output_tokens": 5864,
        "total_tokens": 7015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3329,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **1. Circuit Overview**\nThe circuit shown is a **common-source (CS) stage utilizing a composite (or \"self-cascode\") NMOS structure**. While $M_1$ and $M_2$ are stacked in series like a cascode, their gates are tied together to the same input $V_{\\text{in}}$. \n\nLet the internal node between the drain of $M_1$ and the source of $M_2$ be denoted as node $X$ with voltage $V_X$.\n\n---\n\n### **2. Large-Signal (DC) Analysis & Operating Regions**\n\n#### **A. Why $M_1$ Cannot Operate in Saturation**\nAssume $V_{\\text{in}} > V_{TH1}$ so that the circuit conducts current:\n1. For $M_2$ to be ON and conducting, its gate-source voltage must exceed its threshold voltage:\n   $$V_{GS2} = V_{\\text{in}} - V_X > V_{TH2} \\implies V_X < V_{\\text{in}} - V_{TH2}$$\n2. For $M_1$, the drain-source voltage is $V_{DS1} = V_X$, and its overdrive voltage is $V_{GS1} - V_{TH1} = V_{\\text{in}} - V_{TH1}$.\n3. Assuming identical enhancement-mode transistors where $V_{TH2} \\ge V_{TH1}$ (in fact, $V_{TH2} > V_{TH1}$ due to the body effect since $V_{SB2} = V_X > 0$), we have:\n   $$V_{DS1} = V_X < V_{\\text{in}} - V_{TH2} \\le V_{\\text{in}} - V_{TH1}$$\n\n**Key Conclusion:** Whenever the circuit conducts current, **$M_1$ is always in the triode (linear) region**. Meanwhile, $M_2$ operates in the **saturation region** as long as $V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH2}$.\n\n---\n\n#### **B. Equivalent Single-Transistor Model**\nNeglecting the body effect ($\\gamma = 0$) and channel-length modulation ($\\lambda = 0$) so that $V_{TH1} = V_{TH2} = V_{TH}$:\n\n* **Current in $M_1$ (Triode):**\n  $$I_{D1} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 \\left[2(V_{\\text{in}} - V_{TH})V_X - V_X^2\\right]$$\n  By completing the square, this can be rewritten as:\n  $$I_{D1} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 \\left[(V_{\\text{in}} - V_{TH})^2 - (V_{\\text{in}} - V_X - V_{TH})^2\\right]$$\n\n* **Current in $M_2$ (Saturation):**\n  $$I_{D2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{\\text{in}} - V_X - V_{TH})^2$$\n\nSince $I_{D1} = I_{D2} = I_D$, we can substitute $(V_{\\text{in}} - V_X - V_{TH})^2 = \\frac{I_D}{\\frac{1}{2}\\mu_n C_{ox} (W/L)_2}$ into the $I_{D1}$ equation and solve for $I_D$:\n\n$$I_D = \\frac{1}{2}\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_{\\text{eq}} (V_{\\text{in}} - V_{TH})^2$$\n\nwhere the **effective aspect ratio** is the series (harmonic) combination of the two aspect ratios:\n$$\\left(\\frac{W}{L}\\right)_{\\text{eq}} = \\frac{(W/L)_1 (W/L)_2}{(W/L)_1 + (W/L)_2} = \\left[ \\frac{1}{(W/L)_1} + \\frac{1}{(W/L)_2} \\right]^{-1}$$\n\n* **Special Case ($W_1 = W_2 = W$):**\n  $$\\left(\\frac{W}{L}\\right)_{\\text{eq}} = \\frac{W}{L_1 + L_2}$$\n  Thus, the two series transistors behave identically to a **single MOSFET with channel length $L_{\\text{eff}} = L_1 + L_2$**.\n\n* **Internal Node Voltage ($V_X$):**\n  Equating $I_{D1}$ and $I_{D2}$ also yields the voltage at the intermediate node $X$:\n  $$V_X = (V_{\\text{in}} - V_{TH}) \\left( 1 - \\sqrt{\\frac{(W/L)_1}{(W/L)_1 + (W/L)_2}} \\right)$$\n  For identical devices, $V_X = \\left(1 - \\frac{1}{\\sqrt{2}}\\right)(V_{\\text{in}} - V_{TH}) \\approx 0.293(V_{\\text{in}} - V_{TH})$.\n\n---\n\n### **3. Large-Signal Voltage Transfer Characteristic ($V_{\\text{out}}$ vs. $V_{\\text{in}}$)**\n\nAs $V_{\\text{in}}$ increases from $0$ to $V_{DD}$, the circuit passes through three distinct regimes:\n\n1. **Region I — Cutoff ($V_{\\text{in}} < V_{TH}$):**\n   * Both $M_1$ and $M_2$ are OFF ($I_D = 0$).\n   * $$V_{\\text{out}} = V_{DD}$$\n\n2. **Region II — $M_1$ in Triode, $M_2$ in Saturation ($V_{TH} \\le V_{\\text{in}}$ and $V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH}$):**\n   * The composite structure acts as a saturated transistor with aspect ratio $(W/L)_{\\text{eq}}$:\n   * $$V_{\\text{out}} = V_{DD} - \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_{\\text{eq}} R_D (V_{\\text{in}} - V_{TH})^2$$\n\n3. **Region III — Both $M_1$ and $M_2$ in Triode ($V_{\\text{out}} < V_{\\text{in}} - V_{TH}$):**\n   * Once $V_{\\text{out}}$ drops below $V_{\\text{in}} - V_{TH}$, $M_2$ enters the triode region as well. The composite structure behaves as a single triode transistor:\n   * $$I_D = \\frac{V_{DD} - V_{\\text{out}}}{R_D} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_{\\text{eq}} \\left[ 2(V_{\\text{in}} - V_{TH})V_{\\text{out}} - V_{\\text{out}}^2 \\right]$$\n\n---\n\n### **4. Small-Signal Analysis (Active Region)**\n\nIn the active amplifying region ($M_1$ in triode, $M_2$ in saturation), we must take care with $M_1$'s small-signal model because it is in the triode region, meaning its drain-source resistance $r_{o1}$ is relatively small (on the order of $1/g_m$):\n\n$$g_{m1} = \\frac{\\partial I_{D1}}{\\partial V_{GS1}} = \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 V_X$$\n\n$$g_{ds1} = \\frac{1}{r_{o1}} = \\frac{\\partial I_{D1}}{\\partial V_{DS1}} = \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{\\text{in}} - V_{TH} - V_X)$$\n\n#### **A. Output Resistance ($R_{\\text{out}}$)**\nSetting $v_{\\text{in}} = 0$, $M_1$ presents a resistor $r_{o1}$ from the source of $M_2$ to ground. $M_2$ acts as a cascode device degenerated by $r_{o1}$. Looking into the drain of $M_2$, the resistance is:\n\n$$R_{\\text{out}, M2} = r_{o2}\\left[1 + (g_{m2} + g_{mb2})r_{o1}\\right] + r_{o1}$$\n\nHence, the total output resistance at the $V_{\\text{out}}$ node is:\n\n$$R_{\\text{out}} = R_D \\parallel R_{\\text{out}, M2} = R_D \\parallel \\left( r_{o2}\\left[1 + (g_{m2} + g_{mb2})r_{o1}\\right] + r_{o1} \\right)$$\n\n*(Note: Neglecting body effect, $g_{m2} r_{o1} = \\frac{(W/L)_2}{(W/L)_1}$. For identical devices, $g_{m2} r_{o1} = 1$, which gives $R_{\\text{out}, M2} \\approx 2r_{o2}$, consistent with doubling the channel length.)*\n\n#### **B. Effective Transconductance ($G_m$)**\nWith the output node shorted to AC ground ($v_{\\text{out}} = 0$), applying KCL at node $X$:\n* Small-signal current in $M_1$: $i_d = g_{m1} v_{\\text{in}} + g_{ds1} v_x$\n* Small-signal current in $M_2$: $i_d = g_{m2}(v_{\\text{in}} - v_x) - g_{mb2} v_x - \\frac{v_x}{r_{o2}}$\n\nAssuming $r_{o2}$ is large ($1/r_{o2} \\ll g_{m2} + g_{ds1}$), solving for $v_x$ and substituting back gives the overall transconductance:\n\n$$G_m = \\frac{i_d}{v_{\\text{in}}} \\approx \\frac{g_{m1} g_{mb2} + g_{m2}(g_{m1} + g_{ds1})}{g_{m2} + g_{mb2} + g_{ds1}}$$\n\nIf the body effect is neglected ($g_{mb2} = 0$), this simplifies to:\n\n$$G_m = \\frac{g_{m2}(g_{m1} + g_{ds1})}{g_{m2} + g_{ds1}} = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_{\\text{eq}} (V_{\\text{in}} - V_{TH}) = \\sqrt{2\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_{\\text{eq}} I_D}$$\n\n#### **C. Small-Signal Voltage Gain ($A_v$)**\nCombining the exact Norton transconductance and output resistance yields the small-signal voltage gain:\n\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -G_m R_{\\text{out}}$$\n\nOr, expressed exactly including $r_{o2}$:\n\n$$A_v = -\\frac{g_{m2}r_{o2} + g_{m1}r_{o1}\\left[1 + (g_{m2} + g_{mb2})r_{o2}\\right]}{R_D + r_{o2}\\left[1 + (g_{m2} + g_{mb2})r_{o1}\\right] + r_{o1}} R_D$$\n\nFor $r_{o2} \\gg R_D$, this reduces to:\n\n$$A_v \\approx -\\frac{g_{m1} g_{mb2} + g_{m2}(g_{m1} + g_{ds1})}{g_{m2} + g_{mb2} + g_{ds1}} R_D = -\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_{\\text{eq}}(V_{\\text{in}} - V_{TH}) R_D \\quad (\\text{for } \\gamma = 0)$$\n\n---\n\n### **5. Practical Design Significance**\n1. **Synthesizing Long-Channel Devices:** In standard digital CMOS processes or gate-array layouts where all transistors have a fixed minimum length $L_{\\min}$, tying gates in series creates an effective long-channel device ($L_{\\text{eff}} = N \\cdot L_{\\min}$).\n2. **Self-Biased Cascode:** By choosing $(W/L)_2 \\gg (W/L)_1$, the factor $g_{m2}r_{o1} = \\frac{(W/L)_2}{(W/L)_1}$ becomes large, boosting the output resistance $R_{\\text{out}, M2} \\approx (g_{m2}r_{o1})r_{o2}$ similar to a true cascode, **without requiring an additional bias voltage** for the gate of $M_2$.",
        "format": "markdown",
        "sha256": "a7641345f1fceb9e7426e3b442473a31f9b69bf593992f5e36caba9443f2c51d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS pair, with M1 in triode and M2 saturated, and derives the effective aspect ratio and L_eff ≈ L1 + L2 for equal widths. Its output-resistance result for identical devices is also consistent with the modest increase described in the golden solution.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1151,
        "output_tokens": 9147,
        "total_tokens": 10298,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6113,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1151,
        "output_tokens": 9147,
        "total_tokens": 10298,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6113,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **common-source amplifier utilizing a composite (or \"self-cascode\") transistor** formed by stacking two NMOS transistors, $M_1$ and $M_2$, in series with their gates tied together. \n\nBelow is a complete large-signal and small-signal analysis of the circuit.\n\n---\n\n### 1. Large-Signal Analysis (Operating Regions)\n\nLet the node between the drain of $M_1$ and the source of $M_2$ be labeled node $X$, with voltage $V_X$. Assume for simplicity that both transistors have the same threshold voltage ($V_{TH1} = V_{TH2} = V_{TH}$) and neglect the body effect.\n\n#### **A. Cutoff Region ($V_{\\text{in}} < V_{TH}$)**\n* Since $V_{GS1} = V_{\\text{in}} < V_{TH}$, transistor $M_1$ is **OFF** (and consequently $M_2$ is also **OFF**).\n* No drain current flows ($I_D = 0$), so:\n  $$V_{\\text{out}} = V_{DD}$$\n\n#### **B. Active Region ($V_{\\text{in}} > V_{TH}$ and $V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH}$)**\n* When $V_{\\text{in}} > V_{TH}$, both transistors turn **ON** and carry the same current ($I_{D1} = I_{D2}$).\n* Because $M_2$ is conducting current, its gate-source voltage must exceed $V_{TH}$:\n  $$V_{GS2} = V_{\\text{in}} - V_X > V_{TH} \\implies V_X < V_{\\text{in}} - V_{TH}$$\n* Notice that for $M_1$, $V_{DS1} = V_X$ and $V_{GS1} = V_{\\text{in}}$. Substituting these into the inequality above gives:\n  $$V_{DS1} < V_{GS1} - V_{TH}$$\n* **Key Insight:** As long as $M_2$ is ON, **$M_1$ is forced to operate in the triode (linear) region**. $M_1$ can never be in saturation.\n* Meanwhile, as long as $V_{\\text{out}} \\ge V_{\\text{in}} - V_{TH}$, **$M_2$ operates in the saturation region**.\n\n#### **C. Deep Triode Region ($V_{\\text{out}} < V_{\\text{in}} - V_{TH}$)**\n* As $V_{\\text{in}}$ increases further, $I_D$ increases and $V_{\\text{out}} = V_{DD} - I_D R_D$ drops below $V_{\\text{in}} - V_{TH}$.\n* At this point, $M_2$ also enters the **triode region**, so **both $M_1$ and $M_2$ operate in triode**.\n\n---\n\n### 2. Equivalent Single-Transistor Model\n\nWhen $M_1$ is in triode and $M_2$ is in saturation (neglecting channel-length modulation, $\\lambda = 0$), the two stacked transistors behave physically like a **single saturated MOSFET** with an increased effective channel length.\n\nUsing the square-law equations:\n1. **Current in $M_1$ (Triode):**\n   $$I_{D1} = \\frac{1}{2}\\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_1 \\left[ 2(V_{\\text{in}} - V_{TH})V_X - V_X^2 \\right]$$\n   By completing the square, the bracketed term can be rewritten as:\n   $$2(V_{\\text{in}} - V_{TH})V_X - V_X^2 = (V_{\\text{in}} - V_{TH})^2 - (V_{\\text{in}} - V_X - V_{TH})^2$$\n\n2. **Current in $M_2$ (Saturation):**\n   $$I_{D2} = \\frac{1}{2}\\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_2 (V_{\\text{in}} - V_X - V_{TH})^2$$\n   Solving for $(V_{\\text{in}} - V_X - V_{TH})^2$:\n   $$(V_{\\text{in}} - V_X - V_{TH})^2 = \\frac{I_{D2}}{\\frac{1}{2}\\mu_n C_{\\text{ox}} (W/L)_2}$$\n\n3. **Combining $I_{D1} = I_{D2} = I_D$:**\n   Substituting the expression from $M_2$ into $M_1$'s equation gives:\n   $$\\frac{I_D}{\\frac{1}{2}\\mu_n C_{\\text{ox}} (W/L)_1} = (V_{\\text{in}} - V_{TH})^2 - \\frac{I_D}{\\frac{1}{2}\\mu_n C_{\\text{ox}} (W/L)_2}$$\n\n   Solving for $I_D$:\n   $$I_D = \\frac{1}{2}\\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_{\\text{eq}} (V_{\\text{in}} - V_{TH})^2$$\n   where the equivalent aspect ratio is:\n   $$\\left(\\frac{W}{L}\\right)_{\\text{eq}} = \\frac{(W/L)_1 (W/L)_2}{(W/L)_1 + (W/L)_2}$$\n\n> **Special Case:** If both transistors have the same width ($W_1 = W_2 = W$), the equivalent length is simply the sum of the two channel lengths:\n> $$L_{\\text{eq}} = L_1 + L_2$$\n\n---\n\n### 3. Small-Signal Analysis\n\nIn the active region ($M_1$ in triode, $M_2$ in saturation), we can find the small-signal parameters either by using the equivalent transistor model (for ideal $\\lambda = 0$) or by full small-signal circuit analysis.\n\n#### **A. Small-Signal Parameters of $M_1$ (in Triode)**\nEven in the triode region, $M_1$ exhibits both a transconductance ($g_{m1}$) and a finite drain-source resistance ($r_{o1} = R_{\\text{on1}}$):\n$$g_{m1} = \\frac{\\partial I_{D1}}{\\partial V_{\\text{in}}} = \\mu_n C_{\\text{ox}} \\left(\\frac{W}{L}\\right)_1 V_X$$\n$$r_{o1} = \\left(\\frac{\\partial I_{D1}}{\\partial V_X}\\right)^{-1} = \\frac{1}{\\mu_n C_{\\text{ox}} (W/L)_1 (V_{\\text{in}} - V_{TH} - V_X)}$$\n\n#### **B. Overall Transconductance ($G_m$)**\nSetting $v_{\\text{out}} = 0$ and ignoring $r_{o2}$ ($r_{o2} \\to \\infty$):\n* The small-signal drain current of $M_1$ is:\n  $$i_d = g_{m1} v_{\\text{in}} + \\frac{v_x}{r_{o1}}$$\n* The small-signal drain current of $M_2$ is:\n  $$i_d = g_{m2}(v_{\\text{in}} - v_x)$$\n* Equating the two currents to eliminate $v_x$:\n  $$v_x = \\frac{g_{m2} - g_{m1}}{g_{m2} + \\frac{1}{r_{o1}}} v_{\\text{in}}$$\n* Substituting $v_x$ back into $i_d = g_{m2}(v_{\\text{in}} - v_x)$ yields the composite transconductance:\n  $$G_m = \\frac{i_d}{v_{\\text{in}}} = \\frac{g_{m2}(g_{m1}r_{o1} + 1)}{g_{m2}r_{o1} + 1}$$\n\n*(Note: Using the square-law definitions, this simplifies directly to the equivalent single-transistor transconductance $G_m = \\mu_n C_{\\text{ox}} (W/L)_{\\text{eq}} (V_{\\text{in}} - V_{TH})$).*\n\n#### **C. Output Impedance ($R_{\\text{out}}$)**\nSetting $v_{\\text{in}} = 0$, $M_1$ acts as a source-degeneration resistor of value $r_{o1}$ beneath $M_2$. Using the standard cascode output resistance formula:\n$$R_{\\text{out}} = R_D \\parallel \\left[ r_{o2} + (1 + g_{m2}r_{o2})r_{o1} \\right]$$\n\n#### **D. Small-Signal Voltage Gain ($A_v$)**\nCombining $G_m$ and $R_{\\text{out}}$, the small-signal voltage gain is:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -G_m R_{\\text{out}} = -\\left( \\frac{g_{m2}(g_{m1}r_{o1} + 1)}{g_{m2}r_{o1} + 1} \\right) \\Big( R_D \\parallel \\left[ r_{o2} + (1 + g_{m2}r_{o2})r_{o1} \\right] \\Big)$$\n\nIf channel-length modulation in $M_2$ is neglected ($r_{o2} \\to \\infty$), this simplifies cleanly to:\n$$A_v = -\\frac{g_{m2}(g_{m1}r_{o1} + 1)}{g_{m2}r_{o1} + 1} R_D = -g_{m,\\text{eq}} R_D$$",
        "format": "markdown",
        "sha256": "18f32a27a89e7d12a429a95e8d1915653679b26a9c6ef6e5ecd13143a45f86fb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-driven series NMOS pair, with M1 in triode and M2 saturated in normal operation, and derives the equivalent aspect ratio that gives an effective length of L1 + L2 for equal widths. The output-resistance expression is also consistent with the lower triode device; minor modeling caveats do not undermine the essential answer.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1151,
        "output_tokens": 5322,
        "total_tokens": 6473,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3043,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1151,
        "output_tokens": 5322,
        "total_tokens": 6473,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3043,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure can be viewed from two equivalent perspectives:\n1. **A Single-Ended Differential Pair:** An NMOS differential amplifier with a single-ended input ($V_{\\text{in}}$), a reference bias voltage ($V_b$), and a single-ended output ($V_{\\text{out}}$).\n2. **A Common-Drain / Common-Gate (CD-CG) Cascade:** $M_1$ acts as a Source Follower (Common-Drain) driving the source of $M_2$, which operates as a Common-Gate (CG) amplifier loaded by resistor $R_D$.\n\nBelow is a complete large-signal and small-signal analysis of the circuit.\n\n---\n\n### 1. Intuitive Operation\n* **As $V_{\\text{in}}$ increases:** The gate-to-source voltage of $M_1$ increases, causing $M_1$ to conduct more current and pulling the common-source node voltage ($V_S$) **up**.\n* Because the gate of $M_2$ is fixed at a constant DC bias $V_b$, raising $V_S$ reduces the gate-to-source voltage of $M_2$ ($V_{GS2} = V_b - V_S$).\n* Consequently, the drain current of $M_2$ ($I_{D2}$) **decreases**, which reduces the voltage drop across the load resistor $R_D$.\n* Since $V_{\\text{out}} = V_{DD} - I_{D2}R_D$, a decrease in $I_{D2}$ causes $V_{\\text{out}}$ to **increase**. \n\nTherefore, this circuit is a **non-inverting amplifier** (positive voltage gain).\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nBy Kirchhoff's Current Law (KCL) at the common-source node, the tail current $I_1$ is shared between $M_1$ and $M_2$:\n$$I_{D1} + I_{D2} = I_1$$\n\nAssuming $M_1$ and $M_2$ are identical (same $W/L$ and threshold voltage $V_{TH}$) and channel-length modulation is neglected ($\\lambda = 0$):\n\n1. **Balanced Condition ($V_{\\text{in}} = V_b$):**\n   By symmetry, the tail current splits equally between the two branches:\n   $$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n   $$V_{\\text{out}} = V_{DD} - \\frac{I_1 R_D}{2}$$\n\n2. **High Input ($V_{\\text{in}} \\gg V_b$):**\n   $M_1$ steers all the tail current ($I_{D1} = I_1$) and $M_2$ turns completely off ($I_{D2} = 0$).\n   $$V_{\\text{out(max)}} = V_{DD}$$\n\n3. **Low Input ($V_{\\text{in}} \\ll V_b$):**\n   $M_1$ turns off ($I_{D1} = 0$) and $M_2$ conducts all the tail current ($I_{D2} = I_1$).\n   $$V_{\\text{out(min)}} = V_{DD} - I_1 R_D$$\n   *(Note: To keep $M_2$ in saturation during this state, we must ensure $V_{\\text{out}} \\ge V_b - V_{TH2}$.)*\n\n---\n\n### 3. Small-Signal Analysis\n\n#### A. Voltage Gain ($A_v$) — Ideal Case ($\\lambda = 0, \\gamma = 0$)\nIn the small-signal model, $V_{DD}$ and $V_b$ become AC ground, and the ideal current source $I_1$ becomes an open circuit. Let $v_s$ be the small-signal voltage at the common-source node.\n\nThe small-signal drain currents are:\n$$i_{d1} = g_{m1}(v_{\\text{in}} - v_s)$$\n$$i_{d2} = g_{m2}(0 - v_s) = -g_{m2}v_s$$\n\nSince the tail current source is an open circuit in AC, KCL at the source node gives:\n$$i_{d1} + i_{d2} = 0 \\implies g_{m1}(v_{\\text{in}} - v_s) - g_{m2}v_s = 0$$\n\nSolving for $v_s$:\n$$v_s = \\left( \\frac{g_{m1}}{g_{m1} + g_{m2}} \\right) v_{\\text{in}}$$\n\nThe output voltage is generated by $i_{d2}$ flowing through $R_D$:\n$$v_{\\text{out}} = -i_{d2}R_D = g_{m2}R_D v_s$$\n\nSubstituting $v_s$ into the $v_{\\text{out}}$ equation yields the **voltage gain**:\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\left( \\frac{g_{m1}g_{m2}}{g_{m1} + g_{m2}} \\right) R_D$$\n\n* **Special Case (Matched Transistors):** If $M_1$ and $M_2$ are identical and biased equally ($g_{m1} = g_{m2} = g_m$), the gain simplifies to:\n  $$A_v = \\frac{1}{2} g_m R_D$$\n\n---\n\n#### B. Voltage Gain Including Body Effect ($\\gamma \\neq 0, \\lambda = 0$)\nBecause the sources of $M_1$ and $M_2$ are not tied to ground, both transistors experience the body effect (represented by bulk transconductances $g_{mb1}$ and $g_{mb2}$):\n\n$$i_{d1} = g_{m1}v_{\\text{in}} - (g_{m1} + g_{mb1})v_s$$\n$$i_{d2} = -(g_{m2} + g_{mb2})v_s$$\n\nApplying $i_{d1} + i_{d2} = 0$ and solving for $v_{\\text{out}} = -i_{d2}R_D$:\n$$A_v = \\frac{g_{m1}(g_{m2} + g_{mb2})}{g_{m1} + g_{mb1} + g_{m2} + g_{mb2}} R_D$$\n\n* **Important Insight:** If $M_1$ and $M_2$ are identical and biased equally ($g_{m1} = g_{m2} = g_m$ and $g_{mb1} = g_{mb2} = g_{mb}$), the body-effect terms completely cancel out:\n  $$A_v = \\frac{g_m(g_m + g_{mb})}{2(g_m + g_{mb})} R_D = \\frac{1}{2} g_m R_D$$\n\n---\n\n#### C. Input and Output Resistance\n* **Input Resistance ($R_{\\text{in}}$):**\n  Since the input is applied directly to the gate of $M_1$, the low-frequency input resistance is purely capacitive (infinite at DC):\n  $$R_{\\text{in}} = \\infty$$\n\n* **Output Resistance ($R_{\\text{out}}$):**\n  * **Neglecting channel-length modulation ($\\lambda = 0$):**\n    $$R_{\\text{out}} = R_D$$\n  * **Including channel-length modulation ($\\lambda \\neq 0$):**\n    Looking into the drain of $M_2$, $M_2$ acts as a common-gate stage degenerated by the output impedance of source-follower $M_1$ ($R_{S1} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1}$). Thus:\n    $$R_{\\text{out}} = R_D \\parallel \\left[ r_{o2} + \\left(1 + (g_{m2} + g_{mb2})r_{o2}\\right) \\left( \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\right) \\right]$$\n\n---\n\n### 4. Key Advantages of This Topology\n1. **Superior High-Frequency Performance (No Miller Effect):** \n   In a standard Common-Source amplifier, the gate-drain capacitance ($C_{gd}$) is multiplied by the voltage gain (Miller Effect), limiting bandwidth. Here, the drain of $M_1$ is tied directly to AC ground ($V_{DD}$), eliminating Miller multiplication on $C_{gd1}$. Furthermore, $M_2$ is a Common-Gate stage, which also does not suffer from the Miller effect.\n2. **High Input Impedance for a Common-Gate Stage:** \n   A standalone Common-Gate amplifier has a low input impedance ($\\approx 1/g_m$). By placing source-follower $M_1$ in front of $M_2$, the circuit achieves the non-inverting gain and high-frequency benefits of a Common-Gate stage while maintaining a very high input impedance.",
        "format": "markdown",
        "sha256": "77e9b7db545bca0a2a1881764d2c2ab3757ebbe78d3586816eab1534229c4cc4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower driving a common-gate stage (also a source-coupled pair) and gives the correct non-inverting gain. It meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4702,
        "total_tokens": 5845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2631,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 4702,
        "total_tokens": 5845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2631,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete analysis of the circuit shown in the figure, covering its topology, qualitative operation, large-signal (DC) behavior, small-signal (AC) parameters, and high-frequency characteristics.\n\n---\n\n### 1. Circuit Identification\nThis circuit can be viewed from two equivalent perspectives:\n1. **Asymmetric Differential Pair:** A basic NMOS source-coupled differential pair ($M_1$ and $M_2$) biased by a tail current source ($I_1$), with a single-ended input ($V_{\\text{in}}$), a fixed reference voltage ($V_b$) on the other gate, and a single-ended output ($V_{\\text{out}}$).\n2. **Source-Follower + Common-Gate Cascade:** $M_1$ operates as a **Common-Drain (Source Follower)** stage whose output (at its source) drives the source of $M_2$, which operates as a **Common-Gate** amplifier loaded by $R_D$.\n\n---\n\n### 2. Qualitative (Intuitive) Operation\nLet's trace what happens when the input voltage $V_{\\text{in}}$ increases slightly:\n1. **$V_{\\text{in}} \\uparrow \\implies I_{D1} \\uparrow$:** Increasing the gate voltage of $M_1$ increases its gate-source overdrive voltage, causing $M_1$ to conduct more current and pulling the common-source node voltage up slightly.\n2. **$I_{D1} \\uparrow \\implies I_{D2} \\downarrow$:** Because the tail current source $I_1$ forces the sum of the two drain currents to remain constant ($I_{D1} + I_{D2} = I_1$), an increase in $I_{D1}$ forces an equal decrease in $I_{D2}$. *(Equivalently, since the common-source node voltage rises while $V_b$ is fixed, $V_{GS2}$ decreases, reducing $I_{D2}$).*\n3. **$I_{D2} \\downarrow \\implies V_{\\text{out}} \\uparrow$:** Since $V_{\\text{out}} = V_{DD} - I_{D2} R_D$, a smaller current through $R_D$ results in a smaller voltage drop across $R_D$, causing $V_{\\text{out}}$ to rise.\n\n**Conclusion:** The circuit acts as a **non-inverting voltage amplifier** (positive small-signal voltage gain).\n\n---\n\n### 3. Large-Signal (DC) Analysis\n\nAssuming $M_1$ and $M_2$ are identical (matched) and operating in saturation:\n\n* **Equilibrium (Symmetric Bias Point):** \n  When $V_{\\text{in}} = V_b$, the tail current splits equally between the two branches:\n  $$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n  $$V_{\\text{out}} = V_{DD} - \\frac{1}{2} I_1 R_D$$\n\n* **Extreme Input Limits (Current Steering):**\n  * **For $V_{\\text{in}} \\ll V_b$:** $M_1$ turns off ($I_{D1} = 0$) and $M_2$ carries all the tail current ($I_{D2} = I_1$). The output reaches its minimum level:\n    $$V_{\\text{out,min}} = V_{DD} - I_1 R_D$$\n  * **For $V_{\\text{in}} \\gg V_b$:** $M_1$ steers all the tail current ($I_{D1} = I_1$) and $M_2$ turns off ($I_{D2} = 0$). No current flows through $R_D$, so the output reaches its maximum level:\n    $$V_{\\text{out,max}} = V_{DD}$$\n\n* **Saturation Conditions:**\n  * **$M_1$:** Since $V_{D1} = V_{DD}$, $M_1$ remains in saturation as long as $V_{\\text{in}} - V_{TH1} \\le V_{DD}$ (which is almost always satisfied).\n  * **$M_2$:** To keep $M_2$ in saturation, its drain voltage must not drop below $V_{G2} - V_{TH2}$:\n    $$V_{\\text{out}} \\ge V_b - V_{TH2}$$\n  * **Current Source $I_1$:** The common-source node voltage $V_S$ must stay above the minimum compliance voltage ($V_{CS,\\text{min}}$) required by the current source $I_1$.\n\n---\n\n### 4. Small-Signal (AC) Analysis\n\n#### A. Neglecting Channel-Length Modulation ($\\lambda = 0$) and Body Effect ($\\gamma = 0$)\n\nLet $v_s$ be the small-signal voltage at the common-source node:\n\n1. **Input Impedance Looking into the Source of $M_2$:**\n   Since the gate of $M_2$ is at AC ground ($V_b$), the resistance seen looking into the source of $M_2$ is:\n   $$R_{\\text{in,2}} = \\frac{1}{g_{m2}}$$\n\n2. **Source Follower Action of $M_1$:**\n   $M_1$ acts as a source follower loaded by $R_{\\text{in,2}} = \\frac{1}{g_{m2}}$. By voltage division between the intrinsic source resistance of $M_1$ ($\\frac{1}{g_{m1}}$) and the load ($\\frac{1}{g_{m2}}$):\n   $$v_s = v_{\\text{in}} \\left( \\frac{\\frac{1}{g_{m2}}}{\\frac{1}{g_{m1}} + \\frac{1}{g_{m2}}} \\right) = v_{\\text{in}} \\left( \\frac{g_{m1}}{g_{m1} + g_{m2}} \\right)$$\n\n3. **Drain Current of $M_2$ and Output Voltage:**\n   The small-signal drain current of $M_2$ is:\n   $$i_{d2} = g_{m2} v_{gs2} = g_{m2}(0 - v_s) = -g_{m2} v_s = -\\left( \\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} \\right) v_{\\text{in}}$$\n   The output voltage is $v_{\\text{out}} = -i_{d2} R_D$:\n   $$v_{\\text{out}} = \\left( \\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} \\right) R_D v_{\\text{in}}$$\n\n4. **Small-Signal Voltage Gain ($A_v$):**\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} R_D = \\frac{R_D}{\\frac{1}{g_{m1}} + \\frac{1}{g_{m2}}}$$\n   * **Special Case (Matched Transistors at $V_{\\text{in}} = V_b$):** Here, $g_{m1} = g_{m2} = g_m$, which simplifies the gain to:\n     $$A_v = \\frac{1}{2} g_m R_D$$\n\n5. **Input and Output Resistance:**\n   * **Input Resistance ($R_{\\text{in}}$):** Looking into the gate of $M_1$, $R_{\\text{in}} = \\infty$.\n   * **Output Resistance ($R_{\\text{out}}$):** With $\\lambda = 0$, looking into the drain of $M_2$, $R_{\\text{out}} = R_D$.\n\n---\n\n#### B. Including Body Effect ($\\gamma > 0$) and Channel-Length Modulation ($\\lambda > 0$)\n\n* **With Body Effect ($g_{mb}$):**\n  Since the sources of both transistors are not grounded, the body effect acts in parallel with $g_{m2}$ at the common-source node. The voltage gain becomes:\n  $$A_v = \\frac{g_{m1} (g_{m2} + g_{mb2})}{g_{m1} + g_{mb1} + g_{m2} + g_{mb2}} R_D$$\n  *(Note: If $M_1$ and $M_2$ are identical, $g_{m1} + g_{mb1} = g_{m2} + g_{mb2}$, and the body effect cancels out of the voltage division, leaving $A_v = \\frac{1}{2} g_m R_D$ unchanged!)*\n\n* **With Finite Output Resistances ($r_{o1}, r_{o2}$):**\n  Since the drain of $M_1$ is tied to $V_{DD}$ (AC ground), $r_{o1}$ appears directly from the common-source node to AC ground.\n  * The resistance connected to the source of $M_2$ is:\n    $$R_S = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1}$$\n  * Looking into the output terminal $V_{\\text{out}}$, $M_2$ looks like a cascode transistor with source degeneration $R_S$, giving a total output resistance of:\n    $$R_{\\text{out}} = R_D \\parallel \\Big[ r_{o2} + \\big(1 + (g_{m2} + g_{mb2}) r_{o2}\\big) R_S \\Big]$$\n\n---\n\n### 5. Key Advantages of This Topology\n1. **No Miller Effect at the Input:** Because the drain of $M_1$ is connected directly to $V_{DD}$ (an AC ground), the gate-drain capacitance $C_{GD1}$ is simply tied between the input and ground rather than being multiplied by the voltage gain (as it would be in a standard Common-Source stage).\n2. **High Reverse Isolation:** $M_2$ acts as a Common-Gate buffer, isolating the high-impedance output node ($V_{\\text{out}}$) from the input terminal ($V_{\\text{in}}$), making the circuit very stable at high frequencies (similar to a cascode amplifier).",
        "format": "markdown",
        "sha256": "da39f6c185e32991c68507bad79a50d1139b94d9b93e8e2e6b566e6650f5dce1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower driving a common-gate stage (equivalently, a source-coupled differential pair) and gives the correct non-inverting gain expression.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 5164,
        "total_tokens": 6307,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2846,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 5164,
        "total_tokens": 6307,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2846,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a classic CMOS amplifier configuration (commonly featured in Behzad Razavi’s *Design of Analog CMOS Integrated Circuits*). It can be analyzed from two equivalent perspectives:\n\n1. **A Single-Ended Differential Pair:** A source-coupled differential pair where one input ($V_b$) is fixed at a DC bias voltage (AC ground) and the output ($V_{\\text{out}}$) is taken single-endedly.\n2. **A Two-Stage Cascade (CD–CG Amplifier):** Transistor $M_1$ operates as a **Common-Drain (Source Follower)** stage driving the source of $M_2$, which operates as a **Common-Gate (CG)** stage.\n\nBelow is a complete large-signal (DC) and small-signal (AC) analysis of the circuit.\n\n---\n\n### 1. Intuitive Operation\n* **Signal Path:** When the input voltage $V_{\\text{in}}$ increases, the source follower $M_1$ pulls the common-source node voltage ($V_S$) upward. \n* Because the gate of $M_2$ is fixed at $V_b$, an increase in $V_S$ decreases the gate-to-source voltage of $M_2$ ($V_{GS2} = V_b - V_S$).\n* Consequently, the drain current $I_{D2}$ decreases, reducing the voltage drop across $R_D$ and causing $V_{\\text{out}} = V_{DD} - I_{D2}R_D$ to **increase**.\n* **Polarity:** The amplifier is **non-inverting** (positive small-signal voltage gain).\n\n---\n\n### 2. Large-Signal (DC) Analysis\n\nBy Kirchhoff's Current Law (KCL) at the common-source node, the tail current $I_1$ is shared between $M_1$ and $M_2$:\n$$I_{D1} + I_{D2} = I_1$$\n\nAssuming $M_1$ and $M_2$ are identical ($\\mu_n C_{ox} \\frac{W}{L}$ and $V_{TH}$ are matched) and neglecting channel-length modulation ($\\lambda = 0$):\n\n1. **Balanced Condition ($V_{\\text{in}} = V_b$):**\n   By symmetry, the tail current splits equally between the two branches:\n   $$I_{D1} = I_{D2} = \\frac{I_1}{2}$$\n   $$V_{\\text{out}} = V_{DD} - \\frac{I_1}{2}R_D$$\n\n2. **Low Input Extreme ($V_{\\text{in}} \\ll V_b$):**\n   $M_1$ turns **OFF** ($I_{D1} = 0$) and $M_2$ carries the entire tail current ($I_{D2} = I_1$).\n   * **Minimum Output Voltage:**\n     $$V_{\\text{out, min}} = V_{DD} - I_1 R_D$$\n   * **Condition for $M_2$ to remain in saturation:**\n     $$V_{\\text{out, min}} \\ge V_b - V_{TH2} \\implies V_{DD} - I_1 R_D \\ge V_b - V_{TH2}$$\n   * **Cutoff threshold for $M_1$:** $M_1$ turns off completely when:\n     $$V_{\\text{in}} \\le V_b - \\sqrt{\\frac{2 I_1}{\\mu_n C_{ox} (W/L)}}$$\n\n3. **High Input Extreme ($V_{\\text{in}} \\gg V_b$):**\n   $M_1$ carries the entire tail current ($I_{D1} = I_1$) and pulls the common-source node high enough to turn $M_2$ **OFF** ($I_{D2} = 0$).\n   * **Maximum Output Voltage:**\n     $$V_{\\text{out, max}} = V_{DD}$$\n   * **Cutoff threshold for $M_2$:** $M_2$ turns off completely when:\n     $$V_{\\text{in}} \\ge V_b + \\sqrt{\\frac{2 I_1}{\\mu_n C_{ox} (W/L)}}$$\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\nAssuming both transistors are biased in the saturation region:\n\n#### A. Input Resistance ($R_{\\text{in}}$)\nSince the input signal is applied purely to the insulated gate of MOSFET $M_1$, the low-frequency small-signal input resistance is infinite:\n$$R_{\\text{in}} = \\infty$$\n\n---\n\n#### B. Voltage Gain ($A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$)\n\n##### **Case 1: Neglecting Body Effect ($\\gamma = 0$) and Channel-Length Modulation ($\\lambda = 0$)**\n1. **Resistance seen looking into the source of $M_2$:**\n   Since the gate of $M_2$ is at AC ground ($v_{g2} = 0$), looking into its source yields:\n   $$R_{S2} = \\frac{1}{g_{m2}}$$\n2. **Voltage at the common-source node ($v_s$):**\n   $M_1$ acts as a source follower loaded by $R_{S2} = \\frac{1}{g_{m2}}$. Using the voltage divider formula:\n   $$v_s = v_{\\text{in}} \\frac{R_{S2}}{\\frac{1}{g_{m1}} + R_{S2}} = v_{\\text{in}} \\frac{\\frac{1}{g_{m2}}}{\\frac{1}{g_{m1}} + \\frac{1}{g_{m2}}} = v_{\\text{in}} \\left( \\frac{g_{m1}}{g_{m1} + g_{m2}} \\right)$$\n3. **Small-signal drain current of $M_2$ ($i_{d2}$):**\n   $$i_{d2} = g_{m2}(0 - v_s) = -g_{m2} v_s = -\\left( \\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} \\right) v_{\\text{in}}$$\n4. **Output Voltage and Gain:**\n   $$v_{\\text{out}} = -i_{d2} R_D = \\left( \\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} \\right) R_D v_{\\text{in}}$$\n   $$\\boxed{A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} R_D = \\frac{R_D}{\\frac{1}{g_{m1}} + \\frac{1}{g_{m2}}}}$$\n\n*Note: If $M_1$ and $M_2$ are identical and biased symmetrically ($g_{m1} = g_{m2} = g_m$), the gain simplifies to:*\n$$A_v = \\frac{1}{2} g_m R_D$$\n\n---\n\n##### **Case 2: Including Body Effect ($\\gamma > 0, \\lambda = 0$)**\nBecause the sources of $M_1$ and $M_2$ are tied together and not connected to ground (the bulk/substrate), both transistors experience body effect ($g_{mb1}, g_{mb2}$):\n* The output impedance of the source follower $M_1$ becomes $\\frac{1}{g_{m1} + g_{mb1}}$.\n* The input impedance looking into the source of the common-gate stage $M_2$ becomes $\\frac{1}{g_{m2} + g_{mb2}}$.\n\nFollowing the same voltage-divider derivation:\n$$v_s = v_{\\text{in}} \\frac{g_{m1}}{g_{m1} + g_{mb1} + g_{m2} + g_{mb2}}$$\n$$i_{d2} = -(g_{m2} + g_{mb2}) v_s$$\n$$\\boxed{A_v = \\frac{g_{m1}(g_{m2} + g_{mb2})}{g_{m1} + g_{mb1} + g_{m2} + g_{mb2}} R_D}$$\n\n---\n\n##### **Case 3: Exact Analysis ($\\gamma > 0$ and $\\lambda > 0$)**\nWhen channel-length modulation ($r_{o1}, r_{o2}$) is included:\n* Because the drain of $M_1$ is connected to $V_{DD}$ (AC ground), $r_{o1}$ appears directly in parallel with the common-source node to ground.\n* The Thévenin equivalent driving the source of $M_2$ has:\n  $$v_{\\text{th}} = g_{m1} R_{S1} v_{\\text{in}}, \\quad \\text{where } R_{S1} = \\frac{1}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}}}$$\n* Using the exact Common-Gate stage gain equation for $M_2$:\n  $$\\boxed{A_v = \\frac{g_{m1} \\left( g_{m2} + g_{mb2} + \\frac{1}{r_{o2}} \\right) R_D}{\\left( g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} \\right)\\left( 1 + \\frac{R_D}{r_{o2}} \\right) + g_{m2} + g_{mb2} + \\frac{1}{r_{o2}}}}$$\n\n---\n\n#### C. Output Resistance ($R_{\\text{out}}$)\nSetting $v_{\\text{in}} = 0$:\n1. **Simplified ($\\lambda = 0$):** Looking into the drain of $M_2$, the transistor impedance is infinite, so:\n   $$\\boxed{R_{\\text{out}} = R_D}$$\n2. **Exact ($\\lambda > 0, \\gamma > 0$):** Looking into the drain of $M_2$ with source degeneration $R_{S1} = \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1}$:\n   $$\\boxed{R_{\\text{out}} = R_D \\parallel \\left[ r_{o2} + \\left( 1 + (g_{m2} + g_{mb2})r_{o2} \\right) R_{S1} \\right]}$$\n\n---\n\n### 4. Key Advantages & Practical Significance\n1. **Superior High-Frequency Performance (No Miller Effect):** \n   In a standard Common-Source amplifier, the gate-drain capacitance ($C_{GD}$) is multiplied by the voltage gain (Miller Effect), creating a dominant low-frequency pole at the input. Here, the drain of $M_1$ is tied to $V_{DD}$ (AC ground), and the gate of $M_2$ is tied to $V_b$ (AC ground). This completely eliminates Miller multiplication of $C_{GD1}$ and $C_{GD2}$.\n2. **High Input Impedance for a Common-Gate Stage:** \n   A standalone Common-Gate stage has a low input impedance ($\\approx 1/g_m$). By placing the source follower $M_1$ in front of $M_2$, the circuit achieves the high-frequency benefits of a Common-Gate stage while maintaining a very high (capacitive) input impedance at the gate of $M_1$.",
        "format": "markdown",
        "sha256": "b4e90358217e34f8be1795e52c1c475bb92fcc28b518564bcf07d3b866f6fa5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower–to–common-gate topology (equivalently, a source-coupled pair with M2’s gate at Vb and output at its drain), and gives the correct non-inverting gain. Extra analyses are not needed for full credit.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 5855,
        "total_tokens": 6998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3244,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1143,
        "output_tokens": 5855,
        "total_tokens": 6998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3244,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **source follower** (or common-drain amplifier) where transistor $M_1$ is the amplifying device, $M_2$ acts as a constant current source load, and $R_S$ represents the output resistance of the preceding stage (or an explicitly added resistor). \n\nAt high frequencies, the output impedance ($Z_{\\text{out}}$) of this circuit can become **inductive** due to the interaction between the gate resistance **$R_S$**, the gate-to-source parasitic capacitance **$C_{GS}$** of $M_1$, and the transconductance **$g_m$** of $M_1$.\n\nHere is both the intuitive and mathematical explanation of why this happens.\n\n---\n\n### 1. Intuitive Explanation\n\nBy definition, an **inductor** is an element whose impedance magnitude increases with frequency. We can see how $Z_{\\text{out}}$ behaves by examining it at two frequency extremes (assuming $V_{\\text{in}}$ is at AC ground):\n\n* **At Low Frequencies ($\\omega \\to 0$):** \n  The parasitic gate-to-source capacitance $C_{GS}$ of $M_1$ acts as an open circuit. No AC current flows through the resistor $R_S$, so the gate of $M_1$ is held strictly at AC ground ($V_g = 0$). Looking into the source of $M_1$, we simply see the standard low output resistance of a source follower:\n  $$Z_{\\text{out}}(\\omega \\to 0) \\approx \\frac{1}{g_{m1}}$$\n\n* **At Very High Frequencies ($\\omega \\to \\infty$):** \n  The capacitor $C_{GS}$ acts like a short circuit, effectively tying the gate and the source of $M_1$ together. Because $V_{gs} \\approx 0$, the transistor's active current source ($g_{m1} V_{gs}$) turns off. Now, looking into the output node, the signal goes directly through the shorted $C_{GS}$ and sees the resistor $R_S$ connected to ground:\n  $$Z_{\\text{out}}(\\omega \\to \\infty) \\approx R_S$$\n\n**The Conclusion:** \nIf the source resistance is larger than the transistor's intrinsic resistance ($R_S > \\frac{1}{g_{m1}}$), the output impedance **starts at a low value ($\\frac{1}{g_{m1}}$) at low frequencies and rises to a higher value ($R_S$) at high frequencies**. Because the impedance increases with frequency, the circuit behaves like an **inductor** in the transition frequency band.\n\n---\n\n### 2. Mathematical Derivation\n\nTo prove this rigorously, we perform a small-signal analysis to find $Z_{\\text{out}}$. \n\n**Assumptions for simplicity:**\n* Set the independent source $V_{\\text{in}} = 0$ (AC ground).\n* Neglect channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$) and the body effect ($g_{mb1} = 0$).\n* Consider only the dominant parasitic capacitance, $C_{GS}$ of $M_1$.\n\n#### Step 1: Apply a test voltage $V_x$ at $V_{\\text{out}}$ and find $V_{gs}$\nWhen we apply a test voltage $V_x$ at the source of $M_1$, the capacitor $C_{GS}$ and resistor $R_S$ form a voltage divider between $V_x$ and ground. The gate voltage $V_g$ is:\n$$V_g = V_x \\left( \\frac{R_S}{R_S + \\frac{1}{sC_{GS}}} \\right)$$\n\nTherefore, the gate-to-source voltage $V_{gs}$ is:\n$$V_{gs} = V_g - V_x = V_x \\left( \\frac{R_S}{R_S + \\frac{1}{sC_{GS}}} - 1 \\right) = -V_x \\left( \\frac{1}{1 + s R_S C_{GS}} \\right)$$\n\n#### Step 2: Find the total test current $I_x$\nApplying Kirchhoff's Current Law (KCL) at the output node, the current $I_x$ flowing into the source terminal is the sum of the transistor channel current and the current flowing through $C_{GS}$:\n$$I_x = -g_{m1} V_{gs} - s C_{GS} V_{gs} = -(g_{m1} + s C_{GS}) V_{gs}$$\n\nSubstituting $V_{gs}$ into this equation gives:\n$$I_x = V_x \\left( \\frac{g_{m1} + s C_{GS}}{1 + s R_S C_{GS}} \\right)$$\n\n#### Step 3: Calculate $Z_{\\text{out}}$\n$$Z_{\\text{out}}(s) = \\frac{V_x}{I_x} = \\frac{1 + s R_S C_{GS}}{g_{m1} + s C_{GS}}$$\n\n---\n\n### 3. Condition for Inductive Behavior & Equivalent Circuit\n\nLooking at the transfer function for $Z_{\\text{out}}(s)$:\n* There is a **zero** at $\\omega_z = \\frac{1}{R_S C_{GS}}$\n* There is a **pole** at $\\omega_p = \\frac{g_{m1}}{C_{GS}}$\n\nFor the impedance to be inductive (i.e., magnitude increases with frequency and phase is positive), the zero must occur at a lower frequency than the pole ($\\omega_z < \\omega_p$):\n$$\\frac{1}{R_S C_{GS}} < \\frac{g_{m1}}{C_{GS}} \\implies \\mathbf{R_S > \\frac{1}{g_{m1}}}$$\n\n#### Equivalent Passive Model:\nUsing algebraic manipulation, we can rewrite $Z_{\\text{out}}(s)$ as a resistor $R_1$ in series with a parallel $R_2 \\parallel L_{\\text{eq}}$ network:\n\n$$Z_{\\text{out}}(s) = \\frac{1}{g_{m1}} + \\left[ \\left( R_S - \\frac{1}{g_{m1}} \\right) \\parallel s L_{\\text{eq}} \\right]$$\n\nWhere the equivalent inductance $L_{\\text{eq}}$ is given by:\n$$L_{\\text{eq}} = \\frac{C_{GS}}{g_{m1}} \\left( R_S - \\frac{1}{g_{m1}} \\right)$$\n\n### Practical Implications\n1. **Ringing and Instability:** If this source follower drives a capacitive load ($C_L$), the equivalent output inductance $L_{\\text{eq}}$ forms a resonant $LC$ tank with $C_L$, which can cause severe ringing in the step response or even oscillations.\n2. **Active Inductors:** RF and analog designers intentionally exploit this phenomenon to create \"active inductors\" on silicon chips, saving massive amounts of area compared to physical spiral inductors.",
        "format": "markdown",
        "sha256": "94b216e9e5f0ef23fca41b292fee0755c407470227523cbd8f556564d47f8e49"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the stated output impedance. It explains the low-frequency 1/gm-to-high-frequency RS transition and correctly gives RS > 1/gm for inductive behavior; the extra practical comments do not affect the essential answer.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 3659,
        "total_tokens": 4774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2097,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 3659,
        "total_tokens": 4774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2097,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **source follower** (or common-drain amplifier), where $M_1$ is the amplifying transistor driven by a signal source with a finite series resistance $R_S$, and $M_2$ acts as a constant bias current source. \n\nAt high frequencies, the output impedance ($Z_{\\text{out}}$) of this circuit can become **inductive** due to the interaction between the source resistance $R_S$ and the parasitic gate-to-source capacitance $C_{gs1}$ of transistor $M_1$.\n\nHere is both the intuitive and mathematical explanation of why this happens.\n\n---\n\n### 1. Intuitive Explanation\n\nBy definition, an inductor is a component whose impedance **increases with frequency** ($Z_L = j\\omega L$). We can see why this circuit behaves like an inductor by examining its output impedance at two extreme frequency limits (assuming $M_2$ is an ideal current source with infinite impedance, and neglecting channel-length modulation $r_o$):\n\n* **At Low Frequencies ($\\omega \\to 0$):** \n  The parasitic capacitance $C_{gs1}$ acts as an **open circuit**. Because no AC current flows through the gate of $M_1$, there is no voltage drop across $R_S$, putting the gate of $M_1$ firmly at AC ground. Looking into the source of $M_1$, we simply see the standard low-frequency output resistance of a source follower:\n  $$Z_{\\text{out}}(\\omega \\to 0) \\approx \\frac{1}{g_{m1}}$$\n  *(Note: Including the body effect adds $g_{mb1}$ in parallel, making it $\\frac{1}{g_{m1} + g_{mb1}}$, which is still very small).*\n\n* **At Very High Frequencies ($\\omega \\to \\infty$):** \n  The capacitor $C_{gs1}$ acts like a **short circuit**, directly tying the gate and source of $M_1$ together. Because $V_{gs1} \\approx 0$, the transistor's transconductance current source ($g_{m1}V_{gs1}$) shuts off completely. Now, looking into the $V_{\\text{out}}$ terminal, the signal bypasses the transistor channel entirely via $C_{gs1}$ and simply sees the resistor $R_S$ connected to AC ground:\n  $$Z_{\\text{out}}(\\omega \\to \\infty) \\approx R_S$$\n\n**The Conclusion:** \nIf the source resistance is larger than the transistor's transconductance resistance—that is, if **$R_S > \\frac{1}{g_{m1}}$**—then the magnitude of the output impedance starts at a **low value** ($\\frac{1}{g_{m1}}$) at low frequencies and rises to a **high value** ($R_S$) at high frequencies. Because the impedance increases with frequency, **it exhibits an inductive phase shift and behaves like an inductor** over the transition frequency band.\n\n---\n\n### 2. Mathematical Derivation (Small-Signal Analysis)\n\nTo find $Z_{\\text{out}}(s)$, we set the independent input voltage source $V_{\\text{in}} = 0$ (AC ground), apply a test voltage $V_X$ at the output node $V_{\\text{out}}$, and measure the resulting test current $I_X$. \n\n1. **Find the Gate Voltage ($V_G$):**\n   The test voltage $V_X$ is applied to the source of $M_1$. The series combination of $C_{gs1}$ and $R_S$ forms a voltage divider between $V_X$ and ground:\n   $$V_G = V_X \\left( \\frac{R_S}{R_S + \\frac{1}{sC_{gs1}}} \\right) = V_X \\left( \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}} \\right)$$\n\n2. **Find the Gate-to-Source Voltage ($V_{gs1}$):**\n   $$V_{gs1} = V_G - V_X = V_X \\left( \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}} - 1 \\right) = \\frac{-V_X}{1 + s R_S C_{gs1}}$$\n\n3. **Apply Kirchhoff's Current Law (KCL) at the Output Node:**\n   The total current $I_X$ entering the source terminal is the sum of the current flowing through $C_{gs1}$ and the current from the transistor's dependent source:\n   $$I_X = -sC_{gs1}V_{gs1} - g_{m1}V_{gs1} = -(g_{m1} + sC_{gs1})V_{gs1}$$\n\n4. **Solve for $Z_{\\text{out}}(s) = \\frac{V_X}{I_X}$:**\n   Substituting $V_{gs1}$ into the current equation gives:\n   $$I_X = \\frac{g_{m1} + sC_{gs1}}{1 + s R_S C_{gs1}} V_X$$\n\n   $$Z_{\\text{out}}(s) = \\frac{V_X}{I_X} = \\frac{1 + s R_S C_{gs1}}{g_{m1} + sC_{gs1}}$$\n\n---\n\n### 3. Pole-Zero Analysis & Equivalent Circuit\n\nFrom the transfer function $Z_{\\text{out}}(s)$, we can identify one zero and one pole:\n* **Zero frequency:** $\\omega_z = \\frac{1}{R_S C_{gs1}}$\n* **Pole frequency:** $\\omega_p = \\frac{g_{m1}}{C_{gs1}} \\approx \\omega_T$ (the transit frequency of $M_1$)\n\nIf **$R_S > \\frac{1}{g_{m1}}$**, the zero occurs at a lower frequency than the pole ($\\omega_z < \\omega_p$). Between $\\omega_z$ and $\\omega_p$, the impedance rises at $+20\\text{ dB/decade}$, which is the exact signature of an inductor.\n\n#### Passive Equivalent Circuit\nBy algebraically manipulating $Z_{\\text{out}}(s)$, we can rewrite it as:\n\n$$Z_{\\text{out}}(s) = \\frac{1}{g_{m1}} + \\frac{1}{\\frac{1}{R_S - \\frac{1}{g_{m1}}} + \\frac{1}{s \\frac{C_{gs1}}{g_{m1}}\\left(R_S - \\frac{1}{g_{m1}}\\right)}}$$\n\nThis equation shows that the output impedance can be modeled strictly with passive components as a resistor $R_1$ in series with a parallel $R_2\\text{-}L_{\\text{eq}}$ network, where:\n* $R_1 = \\frac{1}{g_{m1}}$\n* $R_2 = R_S - \\frac{1}{g_{m1}}$\n* **$L_{\\text{eq}} = \\frac{C_{gs1}}{g_{m1}}\\left(R_S - \\frac{1}{g_{m1}}\\right)$**\n\n### Practical Significance in Circuit Design\nBecause source followers are frequently used as output buffers to drive large capacitive loads ($C_L$), this inductive output impedance ($L_{\\text{eq}}$) forms a **resonant $LC$ tank** with the load capacitor $C_L$. If not properly damped, this causes severe **ringing** in the step response and peaking in the frequency response. Conversely, RF designers sometimes intentionally exploit this effect to create compact \"active inductors\" on silicon without using large spiral metal coils.",
        "format": "markdown",
        "sha256": "9dfa5a5fb49a23500eaf88b6e3a7d89caa294c2c9ee94a62195ea8d8c1896c1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and explains that Zout rises from about 1/gm1 to RS as Cgs1 shorts gate to source, becoming inductive when RS > 1/gm1. The impedance expression and pole-zero reasoning are also correct.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 4479,
        "total_tokens": 5594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 4479,
        "total_tokens": 5594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **MOSFET source follower** (or common-drain amplifier), where $M_1$ is the amplifying device, $M_2$ acts as a constant current source, and $R_S$ represents the output resistance of the preceding stage (or the internal gate resistance).\n\nThe output impedance ($Z_{\\text{out}}$) of this circuit can become **inductive** at high frequencies due to the interaction between the source resistance $R_S$, the gate-to-source capacitance $C_{gs1}$, and the transconductance $g_{m1}$ of transistor $M_1$. \n\nHere is both the intuitive and mathematical explanation of why this happens.\n\n---\n\n### 1. Intuitive Explanation (Asymptotic Analysis)\n\nTo find the output impedance $Z_{\\text{out}}$, we set the independent input voltage source $V_{\\text{in}}$ to ground (AC ground) and observe how the impedance looking into the $V_{\\text{out}}$ terminal changes with frequency ($\\omega$):\n\n* **At Low Frequencies ($\\omega \\to 0$):** \n  The gate-to-source capacitance $C_{gs1}$ acts as an open circuit. Because no AC current flows through $R_S$, there is no voltage drop across it, keeping the gate of $M_1$ at AC ground. Looking into the source of $M_1$, we see the classic low-frequency source-follower output impedance:\n  $$Z_{\\text{out}}(\\omega \\to 0) \\approx \\frac{1}{g_{m1}}$$\n\n* **At Very High Frequencies ($\\omega \\to \\infty$):** \n  The capacitor $C_{gs1}$ acts like a short circuit between the gate and the source of $M_1$. Because the gate and source are shorted together, $V_{gs1} \\to 0$, which completely turns off the transistor's transconductance current source ($g_{m1}V_{gs1} \\to 0$). Now, looking into the $V_{\\text{out}}$ node, the signal simply passes through the shorted $C_{gs1}$ directly into the resistor $R_S$ to ground:\n  $$Z_{\\text{out}}(\\omega \\to \\infty) \\approx R_S$$\n\n* **The Condition for Inductive Behavior:**\n  If the source resistance is larger than the low-frequency output impedance of the transistor, that is:\n  $$R_S > \\frac{1}{g_{m1}}$$\n  then the magnitude of the output impedance $|Z_{\\text{out}}|$ **increases with frequency** (rising from $1/g_{m1}$ at DC to $R_S$ at high frequencies). In circuit theory, an impedance whose magnitude increases with frequency (and exhibits a positive phase shift) is **inductive**.\n\n---\n\n### 2. Mathematical Derivation\n\nFor simplicity, let's neglect channel-length modulation ($r_{o1}, r_{o2} \\to \\infty$), body effect ($g_{mb1} = 0$), and other parasitic capacitances ($C_{gd1}, C_{sb1}$), as $C_{gs1}$ dominates this effect.\n\n1. Set $V_{\\text{in}} = 0$ and apply a test voltage $V_x$ at $V_{\\text{out}}$, measuring the test current $I_x$ flowing into the node.\n2. $R_S$ and $C_{gs1}$ form a voltage divider for $V_x$. The voltage across $C_{gs1}$ (which is $-V_{gs1}$) is led by the current flowing from the source to the gate:\n   $$V_{gs1} = \\frac{-V_x}{1 + s R_S C_{gs1}}$$\n\n3. Writing Kirchhoff's Current Law (KCL) at the output node:\n   $$I_x = -g_{m1}V_{gs1} - s C_{gs1}V_{gs1} = -(g_{m1} + s C_{gs1})V_{gs1}$$\n\n4. Substituting $V_{gs1}$ into the KCL equation gives:\n   $$I_x = \\frac{g_{m1} + s C_{gs1}}{1 + s R_S C_{gs1}} V_x$$\n\n5. Therefore, the output impedance $Z_{\\text{out}}(s) = \\frac{V_x}{I_x}$ is:\n   $$Z_{\\text{out}}(s) = \\frac{1 + s R_S C_{gs1}}{g_{m1} + s C_{gs1}}$$\n\n---\n\n### 3. Pole-Zero Analysis & Equivalent Circuit\n\nFrom the transfer function $Z_{\\text{out}}(s)$, we can identify one zero ($\\omega_z$) and one pole ($\\omega_p$):\n* **Zero:** $\\omega_z = \\frac{1}{R_S C_{gs1}}$\n* **Pole:** $\\omega_p = \\frac{g_{m1}}{C_{gs1}}$\n\nWhen $R_S > \\frac{1}{g_{m1}}$, the zero occurs at a **lower frequency** than the pole ($\\omega_z < \\omega_p$). Between $\\omega_z$ and $\\omega_p$, the impedance magnitude rises at $+20\\text{ dB/decade}$ and the phase angle approaches $+90^\\circ$, mimicking an inductor.\n\nBy algebraically rearranging $Z_{\\text{out}}(s)$, we can model the exact output impedance as a passive $RL$ network consisting of a resistor $R_1$ in series with a parallel combination of $R_2$ and an **equivalent active inductor ($L_{\\text{eq}}$)**:\n\n$$Z_{\\text{out}}(s) = R_1 + \\left( R_2 \\parallel sL_{\\text{eq}} \\right)$$\n\nWhere the component values are:\n* $R_1 = \\frac{1}{g_{m1}}$\n* $R_2 = R_S - \\frac{1}{g_{m1}}$\n* $L_{\\text{eq}} = \\frac{C_{gs1}}{g_{m1}}\\left(R_S - \\frac{1}{g_{m1}}\\right)$\n\n*(Note: If the body effect $g_{mb1}$ is included, similar behavior occurs, and $R_1$ becomes $\\frac{1}{g_{m1} + g_{mb1}}$).*\n\n### Practical Implication\nBecause source followers are frequently used as output buffers to drive large capacitive loads ($C_L$), this inductive output impedance $L_{\\text{eq}}$ forms a resonant **$LC$ tank** with $C_L$. If $R_S$ is large, this can cause severe **ringing** in the step response or peaking in the frequency response. Conversely, RF designers sometimes intentionally exploit this effect to create compact \"active inductors\" on-chip without using bulky spiral inductors.",
        "format": "markdown",
        "sha256": "13d50188210c93124764a0f5de6d7a357085bbbe28f7447913ac12f689452cc8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that Zout transitions from approximately 1/gm1 at low frequencies to RS at high frequencies as Cgs1 shorts gate to source, and that it rises with frequency when RS > 1/gm1. The derived impedance and pole-zero analysis support the conclusion.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 4166,
        "total_tokens": 5281,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2653,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1115,
        "output_tokens": 4166,
        "total_tokens": 5281,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2653,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete analysis of the circuit, covering its topology, DC operating point, feedback polarity/stability, and small-signal parameters.\n\n---\n\n### 1. Circuit Overview & Topology\n* **Function:** The circuit takes a current input ($I_{\\text{in}}$) at node $X$ and produces a voltage output ($V_{\\text{out}}$), functioning as a **Transimpedance Amplifier (TIA)** with **shunt-shunt feedback**.\n* **Configuration:** \n  * **$M_1$** acts as the forward Common-Source (CS) amplifier stage with drain resistor $R_{D1}$.\n  * **$M_2$** acts as a voltage-controlled current source (also in a Common-Source configuration) that senses the output voltage $V_{\\text{out}}$ and shunts current away from the input node $X$.\n\n---\n\n### 2. Feedback Polarity & Stability (Crucial Insight)\nBefore doing the math, let's trace a small-signal perturbation around the loop:\n1. Suppose the voltage at node $X$ ($V_X$) increases slightly ($\\Delta V_X > 0$).\n2. Because $M_1$ is an inverting Common-Source stage, $V_{\\text{out}}$ **decreases** ($\\Delta V_{\\text{out}} < 0$).\n3. Because $V_{\\text{out}}$ drives the gate of $M_2$, a decrease in $V_{\\text{out}}$ causes $M_2$ to conduct **less** drain current ($\\Delta I_{D2} < 0$).\n4. Since $M_2$ pulls less current out of node $X$, the voltage $V_X$ increases even further!\n\nBecause the loop contains **two inverting Common-Source stages** ($M_1$ and $M_2$), the total phase shift around the loop at low frequencies is $360^\\circ$ ($0^\\circ$). Therefore, this circuit exhibits **positive feedback** with a loop gain magnitude of:\n$$|T| = g_{m1}(R_{D1} \\parallel r_{o1}) \\cdot g_{m2}r_{o2}$$\n\n> *Note:* In a practical circuit where $|T| > 1$, the positive feedback creates a right-half-plane (RHP) pole and **negative input/output resistances**, causing the circuit to latch up to the supply rails unless stabilized. However, in standard textbook problems, we still solve for the theoretical DC equilibrium and small-signal parameters using Kirchhoff's Current Law (KCL).\n\n---\n\n### 3. DC (Large-Signal) Analysis\nAssuming a theoretical DC equilibrium where both $M_1$ and $M_2$ operate in saturation (and neglecting channel-length modulation, $\\lambda = 0$):\n\n1. **Drain Current of $M_2$:**\n   Since the gate of $M_1$ draws zero DC current ($I_{G1} = 0$), KCL at node $X$ requires that all of $I_{\\text{in}}$ flows into the drain of $M_2$:\n   $$I_{D2} = I_{\\text{in}}$$\n\n2. **DC Output Voltage ($V_{\\text{out}}$):**\n   Using the square-law saturation equation for $M_2$ (where $V_{GS2} = V_{\\text{out}}$):\n   $$I_{D2} = \\frac{1}{2}\\mu_n C_{\\text{ox}}\\left(\\frac{W}{L}\\right)_2 (V_{\\text{out}} - V_{TH2})^2 = I_{\\text{in}}$$\n   Solving for $V_{\\text{out}}$:\n   $$V_{\\text{out}} = V_{TH2} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{\\text{ox}} (W/L)_2}}$$\n\n3. **DC Voltage at Node $X$ ($V_X$):**\n   Once $V_{\\text{out}}$ is fixed, the drain current of $M_1$ is determined by Ohm's Law across $R_{D1}$:\n   $$I_{D1} = \\frac{V_{DD} - V_{\\text{out}}}{R_{D1}}$$\n   Since $V_{GS1} = V_X$, we can solve for $V_X$:\n   $$V_X = V_{TH1} + \\sqrt{\\frac{2(V_{DD} - V_{\\text{out}})}{R_{D1} \\mu_n C_{\\text{ox}} (W/L)_1}}$$\n\n4. **Saturation Condition Check:**\n   * For $M_1$ to be in saturation: $V_{\\text{out}} \\ge V_X - V_{TH1}$\n   * For $M_2$ to be in saturation: $V_X \\ge V_{\\text{out}} - V_{TH2}$\n   * Combining both: $V_X - V_{TH1} \\le V_{\\text{out}} \\le V_X + V_{TH2}$. Because $V_X$ and $V_{\\text{out}}$ are both gate-source voltages ($V_{GS1}$ and $V_{GS2}$), they naturally stay within one threshold voltage of each other, keeping both transistors in saturation.\n\n---\n\n### 4. Small-Signal Analysis\n\nLet $r_{o1}$ and $r_{o2}$ be the output resistances of $M_1$ and $M_2$, and define the total load resistance at the output node as $R_1 = R_{D1} \\parallel r_{o1}$.\n\n#### A. Transimpedance Gain ($R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)\n* **Case 1: Neglecting channel-length modulation ($\\lambda = 0 \\implies r_{o1}, r_{o2} \\to \\infty$)**\n  Applying small-signal KCL at node $X$:\n  $$i_{\\text{in}} = i_{d2} = g_{m2} v_{\\text{out}}$$\n  $$\\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2}}$$\n\n* **Case 2: Including channel-length modulation ($\\lambda > 0$)**\n  1. KCL at the output node ($V_{\\text{out}}$):\n     $$g_{m1}v_x + \\frac{v_{\\text{out}}}{R_{D1} \\parallel r_{o1}} = 0 \\implies v_x = -\\frac{v_{\\text{out}}}{g_{m1}(R_{D1} \\parallel r_{o1})}$$\n  2. KCL at the input node ($X$):\n     $$i_{\\text{in}} = g_{m2}v_{\\text{out}} + \\frac{v_x}{r_{o2}}$$\n  3. Substituting $v_x$ into the node $X$ equation:\n     $$i_{\\text{in}} = v_{\\text{out}} \\left[ g_{m2} - \\frac{1}{g_{m1} r_{o2} (R_{D1} \\parallel r_{o1})} \\right]$$\n     $$\\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2} - \\dfrac{1}{g_{m1} r_{o2} (R_{D1} \\parallel r_{o1})}}$$\n\n---\n\n#### B. Small-Signal Input Resistance ($R_{\\text{in}}$)\nLooking into node $X$, $R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}}$.\nFrom the output KCL equation, $v_{\\text{out}} = -g_{m1}(R_{D1} \\parallel r_{o1})v_x$. Substituting this into the node $X$ KCL equation:\n$$i_{\\text{in}} = g_{m2}\\left[-g_{m1}(R_{D1} \\parallel r_{o1})v_x\\right] + \\frac{v_x}{r_{o2}}$$\n\n$$R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = \\frac{1}{\\dfrac{1}{r_{o2}} - g_{m1}g_{m2}(R_{D1} \\parallel r_{o1})} = r_{o2} \\parallel \\left( -\\frac{1}{g_{m1}g_{m2}(R_{D1} \\parallel r_{o1})} \\right)$$\n\n* If $\\lambda = 0$ ($r_{o1}, r_{o2} \\to \\infty$):\n  $$R_{\\text{in}} = -\\frac{1}{g_{m1}g_{m2}R_{D1}}$$\n*(The negative sign is a direct consequence of the positive feedback loop).*\n\n---\n\n#### C. Small-Signal Output Resistance ($R_{\\text{out}}$)\nTo find $R_{\\text{out}}$, set the independent input current source to zero ($i_{\\text{in}} = 0$, open circuit) and apply a test voltage $v_t$ at $V_{\\text{out}}$ drawing a test current $i_t$:\n1. KCL at node $X$ (with $i_{\\text{in}} = 0$):\n   $$g_{m2}v_t + \\frac{v_x}{r_{o2}} = 0 \\implies v_x = -g_{m2}r_{o2}v_t$$\n2. KCL at the output node:\n   $$i_t = \\frac{v_t}{R_{D1} \\parallel r_{o1}} + g_{m1}v_x = v_t \\left( \\frac{1}{R_{D1} \\parallel r_{o1}} - g_{m1}g_{m2}r_{o2} \\right)$$\n3. Solving for $R_{\\text{out}} = \\frac{v_t}{i_t}$:\n   $$R_{\\text{out}} = \\frac{1}{\\dfrac{1}{R_{D1} \\parallel r_{o1}} - g_{m1}g_{m2}r_{o2}} = (R_{D1} \\parallel r_{o1}) \\parallel \\left( -\\frac{1}{g_{m1}g_{m2}r_{o2}} \\right)$$\n\n---\n\n### 5. Summary Table\n\n| Parameter | Exact Expression ($\\lambda > 0$) | Ideal Expression ($\\lambda = 0$) |\n| :--- | :--- | :--- |\n| **Transimpedance Gain ($v_{\\text{out}}/i_{\\text{in}}$)** | $\\dfrac{1}{g_{m2} - \\frac{1}{g_{m1}r_{o2}(R_{D1} \\parallel r_{o1})}}$ | $\\dfrac{1}{g_{m2}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $r_{o2} \\parallel \\left( -\\dfrac{1}{g_{m1}g_{m2}(R_{D1} \\parallel r_{o1})} \\right)$ | $-\\dfrac{1}{g_{m1}g_{m2}R_{D1}}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $(R_{D1} \\parallel r_{o1}) \\parallel \\left( -\\dfrac{1}{g_{m1}g_{m2}r_{o2}} \\right)$ | $0$ |",
        "format": "markdown",
        "sha256": "1720d0f6e686972ecc9a85e6c619192ed77878069709ad785599a43ea2eaeba5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2’s gate is tied to Vout, traces the positive-feedback loop through M1 and M2, and states the negative input resistance and instability/latching consequence, satisfying the golden full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1151,
        "output_tokens": 6509,
        "total_tokens": 7660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3927,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1151,
        "output_tokens": 6509,
        "total_tokens": 7660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3927,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete analysis of the circuit, covering its **DC biasing**, **feedback polarity/stability**, and **small-signal parameters** (both ideal and with channel-length modulation).\n\n---\n\n### 1. Circuit Overview\nThe circuit consists of two NMOS transistors configured in a **shunt-shunt (transimpedance) feedback loop**:\n* **$M_1$ and $R_{D1}$** form a Common-Source (CS) amplifier stage taking its input at node $X$ and producing an output at $V_{\\text{out}}$.\n* **$M_2$** acts as a voltage-controlled current sink in the feedback path, sensing the output voltage $V_{\\text{out}}$ at its gate and sinking current from the input node $X$ at its drain.\n\n---\n\n### 2. DC Operating Point (Biasing) Analysis\nAssuming the circuit is initialized at its theoretical DC equilibrium point with both transistors in saturation:\n\n1. **Drain Current of $M_2$:**\n   Since the gate of $M_1$ draws zero DC current, all of the input current $I_{\\text{in}}$ must flow into the drain of $M_2$:\n   $$I_{D2} = I_{\\text{in}}$$\n\n2. **DC Output Voltage ($V_{\\text{out}}$):**\n   Because $I_{D2}$ is fixed by $I_{\\text{in}}$, the gate-source voltage of $M_2$ ($V_{GS2} = V_{\\text{out}}$) locks to the value required to support $I_{\\text{in}}$ (neglecting channel-length modulation):\n   $$V_{\\text{out}} = V_{GS2} = V_{TH2} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{\\text{ox}} (W/L)_2}}$$\n\n3. **Drain Current of $M_1$:**\n   The DC voltage at $V_{\\text{out}}$ establishes the current through resistor $R_{D1}$:\n   $$I_{D1} = \\frac{V_{DD} - V_{\\text{out}}}{R_{D1}}$$\n\n4. **DC Voltage at Node $X$ ($V_X$):**\n   The current $I_{D1}$ sets the gate-source voltage of $M_1$ ($V_{GS1} = V_X$):\n   $$V_X = V_{GS1} = V_{TH1} + \\sqrt{\\frac{2 I_{D1}}{\\mu_n C_{\\text{ox}} (W/L)_1}}$$\n\n5. **Conditions for Saturation:**\n   * For $M_1$: $V_{\\text{out}} \\ge V_X - V_{TH1}$\n   * For $M_2$: $V_X \\ge V_{\\text{out}} - V_{TH2}$\n\n---\n\n### 3. Feedback Polarity & Stability Analysis (Crucial Insight)\nAlthough this circuit resembles a negative-feedback transimpedance amplifier, **it actually exhibits positive (regenerative) feedback**:\n\n1. Suppose the voltage at node $X$ increases slightly ($V_X \\uparrow$).\n2. Since $M_1$ is an inverting common-source stage, its drain current increases ($I_{D1} \\uparrow$), causing the output voltage to drop ($V_{\\text{out}} \\downarrow$).\n3. Because $V_{\\text{out}}$ is connected to the gate of $M_2$, the gate-source voltage of $M_2$ decreases ($V_{GS2} \\downarrow$), which reduces the current pulled out of node $X$ ($I_{D2} \\downarrow$).\n4. With $I_{\\text{in}}$ constant and $I_{D2}$ decreasing, the net current flowing into node $X$ ($I_{\\text{in}} - I_{D2} > 0$) charges the parasitic capacitance at node $X$, pushing $V_X$ **even higher** ($V_X \\uparrow$).\n\n**Why?** Both $M_1$ (gate-to-drain) and $M_2$ (gate-to-drain) provide a $180^\\circ$ phase inversion. Two inversions in a loop result in a $360^\\circ$ ($0^\\circ$) phase shift—**positive feedback**. In practice, if the loop gain exceeds unity ($g_{m1} g_{m2} R_{D1} r_{o2} > 1$), the circuit is unstable and will **latch up** to one of the supply rails.\n\n---\n\n### 4. Small-Signal Analysis\n\nFor textbook problem-solving, we can find the small-signal parameters around the theoretical bias point.\n\n#### Case A: Neglecting Channel-Length Modulation ($\\lambda = 0 \\implies r_{o1} = r_{o2} = \\infty$)\n\n1. **Transimpedance Gain ($R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$):**\n   Applying KCL at node $X$:\n   $$i_{\\text{in}} = i_{d2} = g_{m2} v_{gs2} = g_{m2} v_{\\text{out}}$$\n   $$R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2}}$$\n\n2. **Input Resistance ($R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}}$):**\n   The small-signal output voltage of the CS stage $M_1$ is:\n   $$v_{\\text{out}} = -g_{m1} R_{D1} v_x$$\n   Substituting $v_{\\text{out}} = \\frac{i_{\\text{in}}}{g_{m2}}$ yields:\n   $$-\\frac{i_{\\text{in}}}{g_{m2}} = g_{m1} R_{D1} v_x \\implies R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = -\\frac{1}{g_{m1} g_{m2} R_{D1}}$$\n   *(Note: The negative input resistance is a direct mathematical consequence of the positive feedback loop.)*\n\n---\n\n#### Case B: Including Channel-Length Modulation ($\\lambda > 0 \\implies \\text{finite } r_{o1}, r_{o2}$)\n\nLet $R_L = R_{D1} \\parallel r_{o1}$ represent the total load resistance at the drain of $M_1$.\n\n1. **Loop Gain ($T$):**\n   Breaking the loop at the gate of $M_1$:\n   $$T = +g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2}$$\n\n2. **Input Resistance ($R_{\\text{in}}$):**\n   * KCL at $V_{\\text{out}}$: $v_{\\text{out}} = -g_{m1} R_L v_x$\n   * KCL at node $X$: $i_{\\text{in}} = g_{m2} v_{\\text{out}} + \\frac{v_x}{r_{o2}}$\n   \n   Substituting $v_{\\text{out}}$ into the node $X$ equation:\n   $$i_{\\text{in}} = \\left( \\frac{1}{r_{o2}} - g_{m1} g_{m2} R_L \\right) v_x$$\n   $$R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = \\frac{r_{o2}}{1 - g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2}}$$\n\n3. **Transimpedance Gain ($R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$):**\n   Substituting $v_x = -\\frac{v_{\\text{out}}}{g_{m1} R_L}$ into the node $X$ KCL equation:\n   $$i_{\\text{in}} = \\left( g_{m2} - \\frac{1}{g_{m1} R_L r_{o2}} \\right) v_{\\text{out}}$$\n   $$R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2} - \\frac{1}{g_{m1} (R_{D1} \\parallel r_{o1}) r_{o2}}} = \\frac{g_{m1} (R_{D1} \\parallel r_{o1}) r_{o2}}{g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2} - 1}$$\n\n4. **Output Resistance ($R_{\\text{out}}$):**\n   Setting $i_{\\text{in}} = 0$ and applying a test voltage $v_t$ at $V_{\\text{out}}$:\n   * At node $X$: $g_{m2} v_t + \\frac{v_x}{r_{o2}} = 0 \\implies v_x = -g_{m2} r_{o2} v_t$\n   * Test current at output: $i_t = \\frac{v_t}{R_L} + g_{m1} v_x = v_t \\left( \\frac{1}{R_L} - g_{m1} g_{m2} r_{o2} \\right)$\n   $$R_{\\text{out}} = \\frac{v_t}{i_t} = \\frac{R_{D1} \\parallel r_{o1}}{1 - g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2}}$$\n\n---\n\n### Summary Table\n\n| Parameter | Ideal ($\\lambda = 0$) | With Channel-Length Modulation ($\\lambda > 0$) |\n| :--- | :--- | :--- |\n| **DC Output ($V_{\\text{out}}$)** | $V_{TH2} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{\\text{ox}} (W/L)_2}}$ | $\\approx V_{TH2} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{\\text{ox}} (W/L)_2}}$ |\n| **Transimpedance ($v_{\\text{out}}/i_{\\text{in}}$)** | $\\frac{1}{g_{m2}}$ | $\\frac{1}{g_{m2} - \\frac{1}{g_{m1} (R_{D1} \\parallel r_{o1}) r_{o2}}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $-\\frac{1}{g_{m1} g_{m2} R_{D1}}$ | $\\frac{r_{o2}}{1 - g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2}}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $0$ | $\\frac{R_{D1} \\parallel r_{o1}}{1 - g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2}}$ |",
        "format": "markdown",
        "sha256": "3f48f1f6b72d862d8d3d0518582055a69a9bd2cf583b2be2c81568a7ac9ee6ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2’s gate is tied to Vout, traces the positive-feedback loop through M1 and M2, and recognizes the resulting negative input resistance and instability/latching. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1151,
        "output_tokens": 7166,
        "total_tokens": 8317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1151,
        "output_tokens": 7166,
        "total_tokens": 8317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete analysis of the circuit shown in the figure, covering its topology, feedback polarity, DC operating point, and small-signal parameters.\n\n---\n\n### 1. Circuit Overview & Topology\nThe circuit consists of two NMOS transistors ($M_1$ and $M_2$) arranged in a closed loop, driven by an input current source $I_{\\text{in}}$ at node $X$, with the output voltage $V_{\\text{out}}$ taken at the drain of $M_1$:\n* **Forward Path ($M_1$ and $R_{D1}$):** $M_1$ operates as a **Common-Source (CS)** stage with a resistive drain load $R_{D1}$, converting the voltage at node $X$ into the output voltage $V_{\\text{out}}$.\n* **Feedback Path ($M_2$):** $M_2$ also operates as a **Common-Source (CS)** stage. Its gate senses the output voltage $V_{\\text{out}}$ and its drain sinks a proportional current from the input node $X$.\n* **Feedback Configuration:** Because the feedback network senses the output *voltage* and subtracts a *current* at the input node, this is a **Shunt-Shunt (Voltage-Current) Feedback** topology, commonly used for **Transimpedance Amplifiers (TIAs)** (current-to-voltage converters).\n\n---\n\n### 2. Feedback Polarity & Stability (Crucial Insight)\nAlthough this circuit resembles a regulated bias network or a feedback transimpedance amplifier, **it actually employs POSITIVE feedback** because there are two inverting common-source stages in the loop:\n\n1. Suppose a small perturbation causes the voltage at node $X$ ($V_X$) to **increase** ($\\uparrow$).\n2. Since $M_1$ is an inverting common-source stage, $V_{\\text{out}}$ **decreases** ($\\downarrow$).\n3. Since $V_{\\text{out}}$ drives the gate of $M_2$ ($V_{GS2} = V_{\\text{out}}$), the drain current $I_{D2}$ **decreases** ($\\downarrow$).\n4. Because $M_2$ pulls less current from node $X$ while $I_{\\text{in}}$ remains constant, the excess current ($I_{\\text{in}} - I_{D2} > 0$) charges the parasitic capacitance at node $X$, causing $V_X$ to **increase even further** ($\\uparrow\\uparrow$).\n\n**Consequence:** Because the loop gain is positive and typically much greater than unity, the circuit is **unstable** in practice and will **latch up** to one of two extreme states (either $M_1$ fully ON and $M_2$ OFF, or $M_1$ OFF and $M_2$ in the triode region).\n\n---\n\n### 3. Large-Signal (DC) Equilibrium Analysis\nAssuming the circuit starts exactly at its theoretical (metastable) DC operating point with both transistors in saturation and neglecting channel-length modulation ($\\lambda = 0$):\n\n1. **Drain Current of $M_2$:**\n   Since the gate of $M_1$ draws zero DC current, all of the input current $I_{\\text{in}}$ must flow into the drain of $M_2$:\n   $$I_{D2} = I_{\\text{in}}$$\n\n2. **Output DC Voltage ($V_{\\text{out}}$):**\n   Since $V_{GS2} = V_{\\text{out}}$, the output voltage is set directly by the overdrive voltage required for $M_2$ to sink $I_{\\text{in}}$:\n   $$V_{\\text{out}} = V_{GS2} = V_{TH2} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{ox} (W/L)_2}}$$\n\n3. **Drain Current and Gate Voltage of $M_1$ ($V_X$):**\n   The current through $R_{D1}$ and $M_1$ is determined by $V_{\\text{out}}$:\n   $$I_{D1} = \\frac{V_{DD} - V_{\\text{out}}}{R_{D1}}$$\n   Consequently, the DC voltage at node $X$ is:\n   $$V_X = V_{GS1} = V_{TH1} + \\sqrt{\\frac{2 I_{D1}}{\\mu_n C_{ox} (W/L)_1}}$$\n\n---\n\n### 4. Small-Signal Analysis\n\n#### Case A: Neglecting Channel-Length Modulation ($\\lambda = 0$, $r_{o1} = r_{o2} = \\infty$)\n1. **Transimpedance Gain ($R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$):**\n   Applying KCL at node $X$:\n   $$i_{\\text{in}} = i_{d2} = g_{m2} v_{\\text{out}}$$\n   $$\\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2}}$$\n\n2. **Input Resistance ($R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}}$):**\n   For the common-source stage $M_1$:\n   $$v_{\\text{out}} = -g_{m1} R_{D1} v_x$$\n   Substituting $v_{\\text{out}} = \\frac{i_{\\text{in}}}{g_{m2}}$ gives:\n   $$R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = -\\frac{1}{g_{m1} g_{m2} R_{D1}}$$\n   *(Note: The negative input resistance is a direct mathematical reflection of the positive feedback loop.)*\n\n3. **Output Resistance ($R_{\\text{out}}$):**\n   Setting $i_{\\text{in}} = 0$ forces $i_{d2} = g_{m2} v_{\\text{out}} = 0 \\implies v_{\\text{out}} = 0$ for any finite current, except through the loop:\n   With $r_{o2} \\to \\infty$, no small-signal current can flow into the drain of $M_2$ when $i_{\\text{in}} = 0$, meaning $R_{\\text{out}} \\to 0$.\n\n---\n\n#### Case B: Including Channel-Length Modulation ($r_{o1}, r_{o2} < \\infty$)\nLet $R_L = R_{D1} \\parallel r_{o1}$ be the total load resistance at the output node.\n\n1. **Loop Gain ($T$):**\n   Breaking the loop at the gate of $M_1$:\n   $$T = +g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2}$$\n   *(Positive sign indicates positive feedback).*\n\n2. **Small-Signal KCL Equations:**\n   * At the output node:\n     $$v_{\\text{out}} = -g_{m1} R_L v_x$$\n   * At node $X$:\n     $$i_{\\text{in}} = g_{m2} v_{\\text{out}} + \\frac{v_x}{r_{o2}}$$\n\n3. **Closed-Loop Transimpedance Gain ($R_T$):**\n   Substituting $v_x = -\\frac{v_{\\text{out}}}{g_{m1} R_L}$ into the node $X$ equation yields:\n   $$R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{-g_{m1} (R_{D1} \\parallel r_{o1}) r_{o2}}{1 - g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2}} = \\frac{1}{g_{m2} - \\frac{1}{g_{m1} (R_{D1} \\parallel r_{o1}) r_{o2}}}$$\n\n4. **Closed-Loop Input Resistance ($R_{\\text{in}}$):**\n   Substituting $v_{\\text{out}} = -g_{m1} R_L v_x$ into the node $X$ equation yields:\n   $$R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = \\frac{r_{o2}}{1 - g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2}}$$\n\n5. **Closed-Loop Output Resistance ($R_{\\text{out}}$):**\n   Setting $i_{\\text{in}} = 0$ and applying a test voltage $v_t$ at $V_{\\text{out}}$ gives $v_x = -g_{m2} r_{o2} v_t$. The test current is:\n   $$i_t = \\frac{v_t}{R_L} + g_{m1} v_x = v_t \\left( \\frac{1}{R_L} - g_{m1} g_{m2} r_{o2} \\right)$$\n   $$R_{\\text{out}} = \\frac{v_t}{i_t} = \\frac{R_{D1} \\parallel r_{o1}}{1 - g_{m1} g_{m2} (R_{D1} \\parallel r_{o1}) r_{o2}}$$\n\n---\n\n### 5. Summary Table\n\n| Parameter | Ideal ($\\lambda = 0$) | Exact ($\\lambda > 0$, with $R_L = R_{D1} \\parallel r_{o1}$) |\n| :--- | :--- | :--- |\n| **Feedback Type** | Shunt-Shunt (Positive) | Shunt-Shunt (Positive) |\n| **Loop Gain ($T$)** | $\\infty$ | $+g_{m1} g_{m2} R_L r_{o2}$ |\n| **Transimpedance ($\\frac{v_{\\text{out}}}{i_{\\text{in}}}$)** | $\\frac{1}{g_{m2}}$ | $\\frac{-g_{m1} R_L r_{o2}}{1 - g_{m1} g_{m2} R_L r_{o2}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $-\\frac{1}{g_{m1} g_{m2} R_{D1}}$ | $\\frac{r_{o2}}{1 - g_{m1} g_{m2} R_L r_{o2}}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $0$ | $\\frac{R_L}{1 - g_{m1} g_{m2} R_L r_{o2}}$ |\n\n*(Note: To convert this circuit into a stable **negative-feedback** amplifier, one of the stages must be made non-inverting—for example, by configuring $M_1$ as a Common-Drain source follower or Common-Gate stage).*",
        "format": "markdown",
        "sha256": "2deecfb64fa249883963cde6b5b6b9b06e7468cb74d5202e523a02701227667d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection to Vout, the positive-feedback loop through M1 and M2, and its instability/latching consequence. The golden solution’s full-credit rule applies; a precise formula is not required.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1151,
        "output_tokens": 6000,
        "total_tokens": 7151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3565,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1151,
        "output_tokens": 6000,
        "total_tokens": 7151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3565,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete analysis of the circuit shown in the figure, covering its topology, qualitative operation, classical feedback analysis, and exact small-signal nodal analysis.\n\n---\n\n### 1. Circuit Topology Identification\n\n* **Forward Amplifier Stages:**\n  * **Stage 1 ($M_1$ and $R_{D1}$):** The gate of $M_1$ is tied to a constant bias voltage $V_b$ (AC ground), the input current $I_{\\text{in}}$ is applied to the source, and the output is taken at the drain (node $X$). Therefore, $M_1$ operates as a **Common-Gate (CG)** stage, which inherently provides a low input impedance to accept the input current.\n  * **Stage 2 ($M_2$ and $R_{D2}$):** The signal at node $X$ drives the gate of $M_2$, whose source is grounded and whose drain forms the output node $V_{\\text{out}}$. Therefore, $M_2$ operates as a **Common-Source (CS)** stage.\n* **Feedback Network ($R_F$):**\n  * **Output Sensing (Shunt):** Resistor $R_F$ is connected directly to the output node, sensing the output voltage $V_{\\text{out}}$ in parallel (shunt).\n  * **Input Mixing (Shunt):** The other end of $R_F$ is connected directly to the input node (the source of $M_1$), mixing the feedback current $i_{RF}$ with the input current $I_{\\text{in}}$ in parallel (shunt).\n* **Overall Topology:** This is a two-stage **Transimpedance Amplifier (TIA)** employing **Shunt–Shunt (Voltage–Current) Feedback**.\n\n---\n\n### 2. Qualitative Operation & Feedback Polarity\n\nLet us trace a small increase in the input current ($I_{\\text{in}} \\uparrow$) around the loop to verify that the feedback is negative:\n\n1. **$I_{\\text{in}} \\uparrow$** injects more current into the source node of $M_1$, causing the source voltage $V_{S1}$ to **rise ($V_{S1} \\uparrow$)**.\n2. Since the gate is fixed at $V_b$, the gate-to-source voltage $V_{GS1} = V_b - V_{S1}$ **decreases ($V_{GS1} \\downarrow$)**.\n3. A smaller $V_{GS1}$ reduces the drain current of $M_1$ ($I_{D1} \\downarrow$), which reduces the voltage drop across $R_{D1}$ and causes the voltage at node $X$ ($V_X = V_{DD} - I_{D1}R_{D1}$) to **rise ($V_X \\uparrow$)**.\n4. Because node $X$ drives the gate of $M_2$, $V_{GS2}$ **increases ($V_{GS2} \\uparrow$)**, increasing $I_{D2}$ and pulling the output voltage $V_{\\text{out}} = V_{DD} - I_{D2}R_{D2}$ **down ($V_{\\text{out}} \\downarrow$)**.\n5. With $V_{\\text{out}}$ dropping and $V_{S1}$ rising, the feedback current $i_{RF} = \\frac{V_{\\text{out}} - V_{S1}}{R_F}$ flowing into the input node **decreases ($i_{RF} \\downarrow$)**.\n\nSince an increase in $I_{\\text{in}}$ causes a decrease in $i_{RF}$ entering the same input summing node, the feedback opposes the original perturbation. Thus, the circuit operates with **negative feedback**.\n\n---\n\n### 3. Feedback Analysis (Two-Port / Return-Ratio Method)\n\n*(Assumptions: Channel-length modulation and body effect are neglected, i.e., $\\lambda = 0$ and $\\gamma = 0$. The forward amplifier is assumed unilateral, meaning feedforward current through $R_F$ is negligible compared to the active stage gain.)*\n\n#### Step A: Break the Loop and Apply Loading\nFor a **shunt–shunt** feedback loop:\n* To find the loading of $R_F$ at the **input**, short the output to AC ground ($V_{\\text{out}} = 0$). This places $R_F$ from the input node to ground.\n* To find the loading of $R_F$ at the **output**, short the input to AC ground ($V_{\\text{in}} = 0$). This places $R_F$ from the output node to ground.\n\n#### Step B: Open-Loop Parameters\n1. **Open-Loop Input Resistance ($R_{\\text{in,open}}$):**\n   Looking into the source of $M_1$ with $R_F$ shunted to ground:\n   $$R_{\\text{in,open}} = R_F \\parallel \\frac{1}{g_{m1}} = \\frac{R_F}{1 + g_{m1}R_F}$$\n\n2. **Open-Loop Output Resistance ($R_{\\text{out,open}}$):**\n   Looking into the drain of $M_2$ with $R_F$ shunted to ground:\n   $$R_{\\text{out,open}} = R_{D2} \\parallel R_F = \\frac{R_{D2}R_F}{R_{D2} + R_F}$$\n\n3. **Open-Loop Transimpedance Gain ($A_{\\text{open}}$):**\n   * The input current $i_{\\text{in}}$ produces a source voltage at $M_1$:\n     $$v_{s1} = i_{\\text{in}} R_{\\text{in,open}} = i_{\\text{in}} \\left(\\frac{R_F}{1 + g_{m1}R_F}\\right)$$\n   * The small-signal drain current of $M_1$ is $i_{d1} = g_{m1}v_{gs1} = -g_{m1}v_{s1}$, creating a voltage at node $X$:\n     $$v_X = -i_{d1}R_{D1} = +g_{m1}R_{D1}v_{s1} = i_{\\text{in}} \\left(\\frac{g_{m1}R_F}{1 + g_{m1}R_F}\\right) R_{D1}$$\n   * Stage 2 amplifies $v_X$ into the loaded output node:\n     $$v_{\\text{out}} = -g_{m2}v_X (R_{D2} \\parallel R_F)$$\n   * Combining these yields the open-loop transimpedance gain:\n     $$A_{\\text{open}} = \\frac{v_{\\text{out}}}{i_{\\text{in}}}\\Bigg|_{\\text{open}} = -\\frac{g_{m1}R_F}{1 + g_{m1}R_F} g_{m2} R_{D1} (R_{D2} \\parallel R_F)$$\n\n#### Step C: Feedback Factor ($\\beta$) and Loop Gain ($T$)\n* Shorting the input node ($v_{s1} = 0$) and applying a test voltage $v_{\\text{out}}$ gives the feedback current:\n  $$i_{RF} = \\frac{v_{\\text{out}}}{R_F} \\implies \\beta = \\frac{1}{R_F}$$\n* The **Loop Gain ($T = |A_{\\text{open}}\\beta|$)** is:\n  $$T = \\frac{g_{m1}}{1 + g_{m1}R_F} g_{m2} R_{D1} (R_{D2} \\parallel R_F) = \\frac{g_{m1} g_{m2} R_{D1} R_{D2} R_F}{(1 + g_{m1}R_F)(R_{D2} + R_F)}$$\n\n#### Step D: Closed-Loop Parameters\nBecause the feedback is **shunt** at both ports, the transimpedance gain, input impedance, and output impedance are all divided by $(1 + T)$:\n\n1. **Closed-Loop Transimpedance Gain ($R_{m,\\text{closed}}$):**\n   $$R_{m,\\text{closed}} = \\frac{V_{\\text{out}}}{I_{\\text{in}}} = \\frac{A_{\\text{open}}}{1 + T} = \\frac{-\\frac{g_{m1} g_{m2} R_{D1} R_{D2} R_F^2}{(1 + g_{m1}R_F)(R_{D2} + R_F)}}{1 + \\frac{g_{m1} g_{m2} R_{D1} R_{D2} R_F}{(1 + g_{m1}R_F)(R_{D2} + R_F)}}$$\n   * **High Loop-Gain Approximation ($T \\gg 1$):**\n     $$R_{m,\\text{closed}} \\approx -\\frac{1}{\\beta} = -R_F$$\n\n2. **Closed-Loop Input Resistance ($R_{\\text{in,closed}}$):**\n   $$R_{\\text{in,closed}} = \\frac{R_{\\text{in,open}}}{1 + T} = \\frac{\\frac{R_F}{1 + g_{m1}R_F}}{1 + \\frac{g_{m1} g_{m2} R_{D1} R_{D2} R_F}{(1 + g_{m1}R_F)(R_{D2} + R_F)}}$$\n\n3. **Closed-Loop Output Resistance ($R_{\\text{out,closed}}$):**\n   $$R_{\\text{out,closed}} = \\frac{R_{\\text{out,open}}}{1 + T} = \\frac{\\frac{R_{D2}R_F}{R_{D2} + R_F}}{1 + \\frac{g_{m1} g_{m2} R_{D1} R_{D2} R_F}{(1 + g_{m1}R_F)(R_{D2} + R_F)}}$$\n\n---\n\n### 4. Exact Small-Signal KCL Verification\n\nWe can verify the result directly using Kirchhoff's Current Law (KCL) without breaking the loop:\n\n1. **KCL at the Input Node ($v_{s1}$):**\n   $$i_{\\text{in}} = g_{m1}v_{s1} + \\frac{v_{s1} - v_{\\text{out}}}{R_F} = v_{s1}\\left(g_{m1} + \\frac{1}{R_F}\\right) - \\frac{v_{\\text{out}}}{R_F}$$\n\n2. **Node $X$ Voltage:**\n   $$v_X = g_{m1}R_{D1}v_{s1}$$\n\n3. **KCL at the Output Node ($v_{\\text{out}}$):**\n   $$\\frac{v_{\\text{out}}}{R_{D2}} + g_{m2}v_X + \\frac{v_{\\text{out}} - v_{s1}}{R_F} = 0$$\n   $$v_{\\text{out}}\\left(\\frac{1}{R_{D2}} + \\frac{1}{R_F}\\right) + v_{s1}\\left(g_{m1}g_{m2}R_{D1} - \\frac{1}{R_F}\\right) = 0$$\n\nSolving this system for $\\frac{v_{\\text{out}}}{i_{\\text{in}}}$ yields the **exact** transimpedance gain:\n$$\\frac{v_{\\text{out}}}{i_{\\text{in}}}\\Bigg|_{\\text{exact}} = \\frac{-\\frac{\\left(g_{m1} g_{m2} R_{D1} - \\frac{1}{R_F}\\right) R_{D2} R_F^2}{(1 + g_{m1}R_F)(R_{D2} + R_F)}}{1 + \\frac{g_{m1} g_{m2} R_{D1} R_{D2} R_F}{(1 + g_{m1}R_F)(R_{D2} + R_F)}}$$\n\n*(Note: The term $-\\frac{1}{R_F}$ in the numerator represents the direct feedforward signal through $R_F$. When $g_{m1}g_{m2}R_{D1} \\gg \\frac{1}{R_F}$, this exact expression reduces identically to the two-port feedback result derived in Section 3.)*",
        "format": "markdown",
        "sha256": "b7cd5129cafc2609d28db3648cd6678fef9fe87e6188db871557232307e65c10"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a shunt-shunt transimpedance amplifier. This meets the golden full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 8116,
        "total_tokens": 9242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 8116,
        "total_tokens": 9242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **two-stage Transimpedance Amplifier (TIA)** employing **shunt-shunt (voltage-current) negative feedback**. \n\nBelow is a complete qualitative and quantitative analysis of the circuit.\n\n---\n\n### 1. Circuit Topology & Component Roles\n* **Input Signal ($I_{\\text{in}}$):** A current source applied to the source terminal of $M_1$.\n* **First Stage ($M_1$ and $R_{\\text{D1}}$):** Configured as a **Common-Gate (CG)** amplifier. The gate is held at a constant DC bias voltage $V_b$ (AC ground). It provides a low input impedance to absorb the input current $I_{\\text{in}}$ and converts it into a voltage at node $X$.\n* **Second Stage ($M_2$ and $R_{\\text{D2}}$):** Configured as a **Common-Source (CS)** amplifier. It takes the voltage at node $X$ and provides high voltage gain to the output node $V_{\\text{out}}$.\n* **Feedback Network ($R_F$):** A resistor connected in parallel (shunt) with both the output node and the input node. It senses the output voltage $V_{\\text{out}}$ and returns a proportional feedback current $i_{\\text{RF}}$ to the input node.\n\n---\n\n### 2. Qualitative Feedback Analysis\n\n#### A. Feedback Polarity (Negative vs. Positive)\nWe can verify that the feedback is **negative** by tracing a small-signal perturbation around the loop:\n1. Suppose the input current $I_{\\text{in}}$ **increases**, causing the source voltage of $M_1$ ($V_{S1}$) to **increase**.\n2. Since the gate of $M_1$ is at AC ground ($V_b$), the gate-to-source voltage $V_{GS1} = V_b - V_{S1}$ **decreases**, which reduces the drain current $I_{D1}$.\n3. A decrease in $I_{D1}$ causes the voltage at node $X$ ($V_X = V_{DD} - I_{D1}R_{\\text{D1}}$) to **increase** (a CG stage is non-inverting).\n4. Node $X$ drives the gate of $M_2$. An increase in $V_X$ increases $I_{D2}$, which causes $V_{\\text{out}} = V_{DD} - I_{D2}R_{\\text{D2}}$ to **decrease** (a CS stage is inverting).\n5. Because $V_{\\text{out}}$ decreases while $V_{S1}$ increases, the feedback current $i_{\\text{RF}} = \\frac{V_{\\text{out}} - V_{S1}}{R_F}$ decreases (meaning AC current is pulled *away* from the source of $M_1$ toward the output). This opposes the initial increase in $I_{\\text{in}}$, confirming **negative feedback**.\n\n#### B. Feedback Topology\n* **Output Sensing (Shunt / Voltage):** $R_F$ is connected directly to the output node, sensing the output **voltage** $V_{\\text{out}}$.\n* **Input Mixing (Shunt / Current):** $R_F$ connects directly to the input node, summing the feedback **current** $i_{\\text{RF}}$ with the input current $I_{\\text{in}}$ via Kirchhoff's Current Law (KCL).\n* Therefore, this is a **Voltage-Current (Shunt-Shunt)** feedback amplifier.\n\n---\n\n### 3. Small-Signal Feedback Analysis (Two-Port Method)\n\n*(Assumptions: Neglect channel-length modulation, $\\lambda = 0$, and body effect, $\\gamma = 0$, for simplicity.)*\n\n#### Step 1: Feedback Factor ($\\beta$)\nThe feedback network senses $V_{\\text{out}}$ and produces a feedback current $i_{\\text{RF}}$. With the input node shorted to AC ground ($V_{S1} = 0$):\n$$i_{\\text{RF}} = \\frac{V_{\\text{out}}}{R_F}$$\n\nSince the forward amplifier is inverting, the feedback factor magnitude (transconductance of the feedback network) is:\n$$\\beta = \\frac{1}{R_F}$$\n\n---\n\n#### Step 2: Open-Loop Circuit (Including Loading Effects of $R_F$)\nTo break the loop while accounting for the loading of $R_F$:\n* **At the Input:** Set $V_{\\text{out}} = 0$ (short the output to AC ground). This places $R_F$ from the input node (source of $M_1$) to ground.\n* **At the Output:** Set $V_{\\text{in}} = 0$ (short the input node to AC ground). This places $R_F$ from the output node ($V_{\\text{out}}$) to ground.\n\n1. **Open-Loop Input Resistance ($R_{\\text{in,open}}$):**\n   Looking into the input node, we see $R_F$ in parallel with the source resistance of $M_1$ ($1/g_{m1}$):\n   $$R_{\\text{in,open}} = R_F \\parallel \\frac{1}{g_{m1}} = \\frac{R_F}{1 + g_{m1}R_F}$$\n\n2. **Open-Loop Output Resistance ($R_{\\text{out,open}}$):**\n   Looking into the output node, we see $R_{\\text{D2}}$ in parallel with $R_F$:\n   $$R_{\\text{out,open}} = R_{\\text{D2}} \\parallel R_F = \\frac{R_{\\text{D2}}R_F}{R_{\\text{D2}} + R_F}$$\n\n3. **Open-Loop Transimpedance Gain ($A_0$):**\n   * The input voltage at the source of $M_1$ is:\n     $$v_{s1} = I_{\\text{in}} \\left( R_F \\parallel \\frac{1}{g_{m1}} \\right) = I_{\\text{in}} \\frac{R_F}{1 + g_{m1}R_F}$$\n   * The small-signal drain current of $M_1$ is $i_{d1} = -g_{m1}v_{s1}$, producing a voltage at node $X$:\n     $$v_X = -i_{d1}R_{\\text{D1}} = g_{m1} R_{\\text{D1}} \\left( \\frac{R_F}{1 + g_{m1}R_F} \\right) I_{\\text{in}}$$\n   * The second stage ($M_2$) amplifies $v_X$ into the loaded output resistance $(R_{\\text{D2}} \\parallel R_F)$:\n     $$V_{\\text{out}} = -g_{m2}(R_{\\text{D2}} \\parallel R_F) v_X$$\n   * Combining these gives the open-loop transimpedance gain $A_0 = \\frac{V_{\\text{out}}}{I_{\\text{in}}}$:\n     $$A_0 = -\\frac{g_{m1}R_F}{1 + g_{m1}R_F} \\cdot g_{m2}R_{\\text{D1}}(R_{\\text{D2}} \\parallel R_F)$$\n\n---\n\n#### Step 3: Loop Gain ($T$)\nThe loop gain $T = \\beta |A_0|$ is:\n$$T = \\frac{1}{R_F} \\left[ \\frac{g_{m1}R_F}{1 + g_{m1}R_F} g_{m2}R_{\\text{D1}}(R_{\\text{D2}} \\parallel R_F) \\right] = \\frac{g_{m1}}{1 + g_{m1}R_F} g_{m2}R_{\\text{D1}}(R_{\\text{D2}} \\parallel R_F)$$\n\n---\n\n#### Step 4: Closed-Loop Parameters\nIn a shunt-shunt feedback topology, the gain, input impedance, and output impedance are all divided by the desensitivity factor $(1 + T) = (1 + \\beta |A_0|)$:\n\n1. **Closed-Loop Transimpedance Gain ($R_f$):**\n   $$R_f = \\frac{V_{\\text{out}}}{I_{\\text{in}}} = \\frac{A_0}{1 + \\beta |A_0|} = -\\frac{\\frac{g_{m1}R_F}{1 + g_{m1}R_F} g_{m2}R_{\\text{D1}}(R_{\\text{D2}} \\parallel R_F)}{1 + \\frac{g_{m1}}{1 + g_{m1}R_F} g_{m2}R_{\\text{D1}}(R_{\\text{D2}} \\parallel R_F)}$$\n   *(Note: If the loop gain $T \\gg 1$, the closed-loop gain simplifies to the ideal value: $R_f \\approx -\\frac{1}{\\beta} = -R_F$.)*\n\n2. **Closed-Loop Input Resistance ($R_{\\text{in,closed}}$):**\n   $$R_{\\text{in,closed}} = \\frac{R_{\\text{in,open}}}{1 + \\beta |A_0|} = \\frac{\\frac{R_F}{1 + g_{m1}R_F}}{1 + \\frac{g_{m1}}{1 + g_{m1}R_F} g_{m2}R_{\\text{D1}}(R_{\\text{D2}} \\parallel R_F)}$$\n\n3. **Closed-Loop Output Resistance ($R_{\\text{out,closed}}$):**\n   $$R_{\\text{out,closed}} = \\frac{R_{\\text{out,open}}}{1 + \\beta |A_0|} = \\frac{R_{\\text{D2}} \\parallel R_F}{1 + \\frac{g_{m1}}{1 + g_{m1}R_F} g_{m2}R_{\\text{D1}}(R_{\\text{D2}} \\parallel R_F)}$$\n\n---\n\n### 4. Exact Nodal Analysis (Alternative Direct Method)\n\nBecause the gate of $M_2$ has infinite input impedance at low frequencies, we can also find the **exact** expressions directly via KCL without using the two-port loading approximations:\n\n1. Looking into the source of $M_1$, the input resistance is strictly $\\frac{1}{g_{m1}}$, so $v_{s1} = \\frac{i_{s1}}{g_{m1}}$, where $i_{s1} = I_{\\text{in}} + i_{\\text{RF}}$.\n2. The voltage at node $X$ is $v_X = i_{s1}R_{\\text{D1}} = g_{m1}R_{\\text{D1}}v_{s1}$.\n3. At node $X$ and $V_{\\text{out}}$, $v_X = \\frac{V_{\\text{out}}}{-g_{m2}R_{\\text{D2}}}$ is not quite true because $i_{\\text{RF}}$ leaves the output node. Writing KCL at the output node:\n   $$\\frac{V_{\\text{out}}}{R_{\\text{D2}}} + g_{m2}v_X + i_{\\text{RF}} = 0$$\n4. Solving this exact system of equations yields the **exact closed-loop transimpedance gain**:\n   $$\\frac{V_{\\text{out}}}{I_{\\text{in}}} = -\\frac{g_{m1}g_{m2}R_{\\text{D1}}R_{\\text{D2}}R_F - R_{\\text{D2}}}{1 + g_{m1}(R_F + R_{\\text{D2}}) + g_{m1}g_{m2}R_{\\text{D1}}R_{\\text{D2}}}$$\n   *(Here, the $-R_{\\text{D2}}$ term in the numerator represents the direct feedforward path through $R_F$.)*\n\nWhen the voltage gain of the stages is large ($g_{m1}g_{m2}R_{\\text{D1}}R_{\\text{D2}} \\gg 1$), this exact expression also reduces directly to:\n$$\\frac{V_{\\text{out}}}{I_{\\text{in}}} \\approx -R_F$$",
        "format": "markdown",
        "sha256": "3a5441b5ec73dda226218e3506d178529f9f25b829db833687d9ec086ebc8d9a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a negative-feedback transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 6811,
        "total_tokens": 7937,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 6811,
        "total_tokens": 7937,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a complete, step-by-step analysis of the circuit shown in the figure.\n\n---\n\n### 1. Circuit Overview & Stage Identification\nThis circuit is a two-stage **Transimpedance Amplifier (TIA)**—a circuit that converts an input current ($I_{\\text{in}}$) into a proportional output voltage ($V_{\\text{out}}$)—employing global negative feedback:\n\n* **First Stage ($M_1$ and $R_{D1}$):** **Common-Gate (CG) stage.** The gate of $M_1$ is tied to a constant DC bias voltage $V_b$ (AC ground). The input current $I_{\\text{in}}$ is applied to the source of $M_1$, and the output of this first stage is taken at the drain (Node $X$). A CG stage is **non-inverting** and provides a inherently low input impedance ($\\approx 1/g_{m1}$).\n* **Second Stage ($M_2$ and $R_{D2}$):** **Common-Source (CS) stage.** The signal at Node $X$ drives the gate of $M_2$, whose source is grounded, and the final output $V_{\\text{out}}$ is taken at its drain. A CS stage is **inverting** and provides high voltage gain.\n* **Feedback Network ($R_F$):** The resistor $R_F$ connects the output voltage node ($V_{\\text{out}}$) back to the input current node (the source of $M_1$).\n\n---\n\n### 2. Feedback Polarity and Topology\n\n#### **A. Polarity Check (Negative Feedback)**\n1. Suppose the input current $I_{\\text{in}}$ increases, causing the source voltage of $M_1$ ($V_{S1}$) to rise ($\\uparrow$).\n2. Since $V_b$ is constant, $V_{GS1} = V_b - V_{S1}$ decreases ($\\downarrow$), reducing the drain current of $M_1$ and causing the voltage at Node $X$ ($V_X$) to rise ($\\uparrow$).\n3. As $V_X$ rises ($\\uparrow$), $M_2$ conducts more current, pulling $V_{\\text{out}}$ down ($\\downarrow$).\n4. As $V_{\\text{out}}$ drops ($\\downarrow$), the current $i_{RF}$ flowing from the output back toward the input decreases (i.e., $R_F$ diverts more current *away* from the source of $M_1$), opposing the initial increase in $I_{\\text{in}}$. \n* **Conclusion:** The feedback is **negative**.\n\n#### **B. Feedback Topology**\n* **Output Sensing:** $R_F$ is connected directly to the output node in parallel (shunt), meaning it **senses the output voltage ($V_{\\text{out}}$)**.\n* **Input Mixing:** $R_F$ returns a current ($i_{RF}$) to the input node in parallel (shunt) with the input current source $I_{\\text{in}}$, meaning it **mixes (subtracts) current**.\n* **Classification:** **Voltage–Current (Shunt–Shunt)** feedback.\n\n---\n\n### 3. Feedback Analysis (Loading & Loop Parameters)\n*(Assuming small-signal operation and neglecting channel-length modulation $\\lambda = 0$ and body effect $\\gamma = 0$ for clarity.)*\n\n#### **Step 1: Feedback Factor ($\\beta$)**\nWhen the input node is shorted to AC ground ($V_{S1} = 0$), the feedback current returned by $R_F$ to the input node is:\n$$i_{RF} = \\frac{V_{\\text{out}}}{R_F}$$\nDefining the feedback factor $\\beta$ (with units of $\\Omega^{-1}$):\n$$\\beta = \\frac{1}{R_F}$$\n\n#### **Step 2: Open-Loop Circuit (Including $R_F$ Loading)**\nTo break the loop while properly accounting for the loading effect of $R_F$:\n1. **At the Input:** Set the sensed output voltage to zero ($V_{\\text{out}} = 0$). This places $R_F$ in parallel with the input node to ground.\n2. **At the Output:** Set the input node voltage to zero ($V_{S1} = 0$). This places $R_F$ in parallel with the output node ($R_{D2}$) to ground.\n\n#### **Step 3: Open-Loop Parameters**\n* **Open-Loop Input Resistance ($R_{\\text{in,open}}$):**\n  Looking into the source of $M_1$, we see $1/g_{m1}$ in parallel with $R_F$:\n  $$R_{\\text{in,open}} = R_F \\parallel \\frac{1}{g_{m1}} = \\frac{R_F}{1 + g_{m1}R_F}$$\n\n* **Open-Loop Output Resistance ($R_{\\text{out,open}}$):**\n  Looking into the drain of $M_2$, we see $R_{D2}$ in parallel with $R_F$:\n  $$R_{\\text{out,open}} = R_{D2} \\parallel R_F = \\frac{R_{D2} R_F}{R_{D2} + R_F}$$\n\n* **Open-Loop Transimpedance Gain ($A_0$):**\n  1. The input current $I_{\\text{in}}$ creates a voltage at the source of $M_1$:\n     $$v_{s1} = I_{\\text{in}} \\left( R_F \\parallel \\frac{1}{g_{m1}} \\right)$$\n  2. The CG stage amplifies this voltage to Node $X$:\n     $$v_x = g_{m1} R_{D1} v_{s1} = I_{\\text{in}} \\left( \\frac{g_{m1} R_F}{1 + g_{m1} R_F} \\right) R_{D1}$$\n  3. The CS stage amplifies $v_x$ to the output:\n     $$V_{\\text{out}} = -g_{m2} (R_{D2} \\parallel R_F) v_x$$\n  4. Combining these gives the open-loop transimpedance gain $A_0 = \\left.\\frac{V_{\\text{out}}}{I_{\\text{in}}}\\right|_{\\text{open}}$:\n     $$A_0 = -\\left( \\frac{g_{m1} R_F}{1 + g_{m1} R_F} \\right) g_{m2} R_{D1} (R_{D2} \\parallel R_F)$$\n\n* **Loop Gain ($T$):**\n  $$T = \\beta |A_0| = \\left( \\frac{g_{m1}}{1 + g_{m1} R_F} \\right) g_{m2} R_{D1} (R_{D2} \\parallel R_F)$$\n\n---\n\n### 4. Closed-Loop Parameters\n\nBecause this is a **Shunt–Shunt** topology, negative feedback **reduces both the input and output impedances** by a factor of $(1 + T)$:\n\n#### **1. Closed-Loop Transimpedance Gain ($A_f$)**\n$$A_f = \\frac{V_{\\text{out}}}{I_{\\text{in}}} = \\frac{A_0}{1 + \\beta |A_0|} = \\frac{-\\left( \\frac{g_{m1} R_F}{1 + g_{m1} R_F} \\right) g_{m2} R_{D1} (R_{D2} \\parallel R_F)}{1 + \\left( \\frac{g_{m1}}{1 + g_{m1} R_F} \\right) g_{m2} R_{D1} (R_{D2} \\parallel R_F)}$$\n\nFactoring out $-R_F$:\n$$A_f = -R_F \\left( \\frac{T}{1 + T} \\right)$$\n* **High-Gain Limit ($T \\gg 1$):** \n  $$A_f \\approx -\\frac{1}{\\beta} = -R_F$$\n\n#### **2. Closed-Loop Input Resistance ($R_{\\text{in,closed}}$)**\n$$R_{\\text{in,closed}} = \\frac{R_{\\text{in,open}}}{1 + T} = \\frac{R_F \\parallel \\frac{1}{g_{m1}}}{1 + \\left( \\frac{g_{m1}}{1 + g_{m1} R_F} \\right) g_{m2} R_{D1} (R_{D2} \\parallel R_F)}$$\n\n#### **3. Closed-Loop Output Resistance ($R_{\\text{out,closed}}$)**\n$$R_{\\text{out,closed}} = \\frac{R_{\\text{out,open}}}{1 + T} = \\frac{R_{D2} \\parallel R_F}{1 + \\left( \\frac{g_{m1}}{1 + g_{m1} R_F} \\right) g_{m2} R_{D1} (R_{D2} \\parallel R_F)}$$\n\n---\n\n### 5. Simplified Approximations & Physical Intuition\n\n#### **Practical Approximation ($R_F \\gg \\frac{1}{g_{m1}}$ and $R_F \\gg R_{D2}$)**\nWhen the feedback resistor $R_F$ is much larger than $1/g_{m1}$ and $R_{D2}$, its loading effect on the open-loop amplifier is negligible:\n* $A_0 \\approx -g_{m2} R_{D1} R_{D2}$\n* $T \\approx \\frac{g_{m2} R_{D1} R_{D2}}{R_F}$\n* $R_{\\text{in,closed}} \\approx \\frac{1/g_{m1}}{1 + \\frac{g_{m2} R_{D1} R_{D2}}{R_F}}$\n* $R_{\\text{out,closed}} \\approx \\frac{R_{D2}}{1 + \\frac{g_{m2} R_{D1} R_{D2}}{R_F}}$\n\n#### **Key Physical Insight**\nAt first glance, one might wonder: *Since the source of $M_1$ has a low impedance ($1/g_{m1}$) and $R_F$ is large, why does the input current $I_{\\text{in}}$ flow through $R_F$ to give $V_{\\text{out}} \\approx -I_{\\text{in}}R_F$ instead of going into the source of $M_1$?*\n\nHere is what happens physically when the second stage gain ($g_{m2}R_{D2}$) is very large:\n1. For a finite output swing $V_{\\text{out}}$, the voltage swing at Node $X$ ($\\Delta V_X = -V_{\\text{out}} / g_{m2}R_{D2}$) only needs to be tiny.\n2. Because $\\Delta V_X$ is tiny, the AC current change through $R_{D1}$ (and thus the AC drain/source current of $M_1$, $\\Delta i_{d1} = \\Delta V_X / R_{D1}$) is also nearly zero.\n3. Consequently, the feedback loop adjusts $V_{\\text{out}}$ so that almost **all** of the AC input current $I_{\\text{in}}$ is pulled through $R_F$ ($i_{RF} \\approx -I_{\\text{in}}$), while holding the input node at a **virtual ground** ($\\Delta V_{S1} \\approx 0$). \n\nThis provides an **ultra-low input impedance** ($R_{\\text{in,closed}} \\ll 1/g_{m1}$), making this topology ideal for high-speed optical receivers (where $I_{\\text{in}}$ comes from a photodiode with large parasitic capacitance).",
        "format": "markdown",
        "sha256": "f96364c9e4b64e81a367a033fa4732eaabe205652f9e4768e3d67acb3dc3c3eb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies M1 as the common-gate input device, M2 as a common-source stage driven by X, and RF as feedback from Vout to the input, forming a transimpedance amplifier. This meets the golden solution’s explicit full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 7780,
        "total_tokens": 8906,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5132,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 7780,
        "total_tokens": 8906,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5132,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is an **active-feedback transimpedance amplifier (TIA)** (also frequently used as a **regulated-cascode-like current buffer** or low-input-impedance current-to-voltage converter). \n\nHere is a complete analysis of its operation, DC biasing, and small-signal performance.\n\n---\n\n### 1. Circuit Overview & Topology\n* **$M_1$ (NMOS):** Operates as a **common-gate (CG)** stage. Its gate is tied to a fixed DC bias voltage $V_b$, its source serves as the low-impedance current-input node (let's label this bottom node **$X$**), and its drain is connected to the output node $V_{\\text{out}}$.\n* **$M_2$ (PMOS):** Acts as a **common-source (CS) active feedback element**. It senses the output voltage $V_{\\text{out}}$ at its gate and feeds a corrective current back into the input node $X$.\n* **$I_1$ & Bottom Current Sink (let's call it $I_B$):** Ideal DC current sources that establish the operating point of the two transistors.\n\n---\n\n### 2. Qualitative Operation (Negative Feedback Loop)\nThe circuit employs a local **negative feedback loop** to pin the voltage at the input node $X$ ($V_X$) and lower the input impedance:\n\n1. Suppose the input current $I_{\\text{in}}$ increases slightly.\n2. This extra current tends to pull the voltage at the input node $V_X$ **up**.\n3. Since $M_1$ has a fixed gate voltage $V_b$, an increase in $V_X$ reduces $V_{GS1} = V_b - V_X$, causing $M_1$ to conduct less current.\n4. Because $I_1$ is constant, the decrease in $M_1$'s current causes the output node voltage $V_{\\text{out}}$ to go **up** (a common-gate stage is non-inverting).\n5. As $V_{\\text{out}}$ rises, the source-to-gate voltage of the PMOS transistor $M_2$ ($V_{SG2} = V_{DD} - V_{\\text{out}}$) **decreases**.\n6. Consequently, $M_2$ supplies **less** current into node $X$, directly counteracting the initial increase in $I_{\\text{in}}$.\n\nBecause the loop gain is high, $V_X$ barely moves, and almost the entire signal current $I_{\\text{in}}$ is absorbed by a matching reduction in $M_2$'s drain current.\n\n---\n\n### 3. DC / Biasing Analysis\nAssuming the DC component of the input signal $I_{\\text{in}}$ is zero and both transistors are in saturation:\n\n1. **Current in $M_1$:** Since the gate of $M_2$ draws no DC current, the entire current $I_1$ must flow through $M_1$:\n   $$I_{D1} = I_1$$\n2. **Input Node Voltage ($V_X$):** Fixing $I_{D1} = I_1$ establishes $V_{GS1}$, locking the DC voltage at node $X$ to:\n   $$V_X = V_b - V_{GS1}$$\n3. **Current in $M_2$:** Applying KCL at node $X$ (where the unlabeled bottom current sink is denoted as $I_B$):\n   $$I_{D1} + I_{D2} = I_B \\implies I_{D2} = I_B - I_1$$\n   *(Note: For $M_2$ to remain on, the circuit requires $I_B > I_1$.)*\n4. **Output DC Voltage ($V_{\\text{out}}$):** The current $I_{D2}$ sets the source-gate voltage of $M_2$, self-biasing the output node at:\n   $$V_{\\text{out,DC}} = V_{DD} - |V_{GS2}|$$\n\n---\n\n### 4. Small-Signal Analysis\n\n#### A. Ideal Approximation (Neglecting Channel-Length Modulation, $r_o \\to \\infty$)\nIf we neglect output resistances ($r_{o1}, r_{o2} \\to \\infty$) and assume ideal current sources:\n* The small-signal drain current of $M_1$ must be zero ($i_{d1} = 0$) because it is connected in series with the ideal current source $I_1$.\n* Since $i_{d1} = -g_{m1} v_x = 0$, the small-signal voltage at node $X$ is forced to zero ($v_x = 0$), yielding an ideal input impedance of:\n  $$R_{\\text{in,ideal}} = \\frac{v_x}{i_{\\text{in}}} = 0$$\n* By KCL at node $X$, all of the small-signal input current $i_{\\text{in}}$ must be balanced by the small-signal drain current of $M_2$ ($i_{d2} = -g_{m2} v_{\\text{out}}$):\n  $$i_{\\text{in}} + i_{d2} = 0 \\implies i_{\\text{in}} = g_{m2} v_{\\text{out}}$$\n* Thus, the **transimpedance gain ($R_T$)** is simply:\n  $$R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2}}$$\n\n---\n\n#### B. Exact Analysis (Including $r_{o1}$ and $r_{o2}$)\nWhen finite transistor output resistances $r_{o1}$ and $r_{o2}$ are included (assuming ideal current sources $I_1$ and $I_B$; body effect of $M_1$ can be absorbed into $g_{m1} \\to g_{m1} + g_{mb1}$):\n\n1. **Voltage Gain from Node $X$ to $V_{\\text{out}}$:**\n   Since no small-signal current can enter the ideal current source $I_1$, the total small-signal current through $M_1$ is still zero:\n   $$i_{d1} = -g_{m1} v_x + \\frac{v_{\\text{out}} - v_x}{r_{o1}} = 0 \\implies v_{\\text{out}} = (1 + g_{m1} r_{o1}) v_x \\approx g_{m1} r_{o1} v_x$$\n\n2. **Input Resistance ($R_{\\text{in}}$):**\n   Writing KCL at node $X$ (noting that $i_{d1} = 0$, so all of $i_{\\text{in}}$ flows into the drain of $M_2$):\n   $$i_{\\text{in}} = g_{m2} v_{\\text{out}} + \\frac{v_x}{r_{o2}}$$\n   Substituting $v_{\\text{out}} = (1 + g_{m1} r_{o1}) v_x$:\n   $$i_{\\text{in}} = \\left[ g_{m2}(1 + g_{m1} r_{o1}) + \\frac{1}{r_{o2}} \\right] v_x$$\n   $$R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = \\frac{1}{g_{m2}(1 + g_{m1} r_{o1}) + \\frac{1}{r_{o2}}} \\approx \\frac{1}{g_{m2} g_{m1} r_{o1}}$$\n   * **Physical Insight:** Without $M_2$, a standard common-gate stage has $R_{\\text{in}} \\approx \\frac{1}{g_m}$. Here, the active feedback loop boosts the effective transconductance by the intrinsic gain of $M_1$ ($g_{m1} r_{o1}$), reducing the input impedance by a factor of $g_{m1} r_{o1}$.\n\n3. **Transimpedance Gain ($R_T$):**\n   Substituting $v_x = \\frac{v_{\\text{out}}}{1 + g_{m1} r_{o1}}$ into the KCL equation gives:\n   $$R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1 + g_{m1} r_{o1}}{g_{m2}(1 + g_{m1} r_{o1}) + \\frac{1}{r_{o2}}} \\approx \\frac{1}{g_{m2}}$$\n\n4. **Output Resistance ($R_{\\text{out}}$):**\n   To find the resistance looking into the $V_{\\text{out}}$ node, set $i_{\\text{in}} = 0$ and apply a test voltage $v_t$ at $V_{\\text{out}}$. \n   * $v_t$ drives the gate of $M_2$, pulling a current $g_{m2} v_t$ out of node $X$.\n   * Because $i_{\\text{in}} = 0$, this current must be supplied through the source of $M_1$, which in turn pulls the exact same current from the test source $v_t$ at the drain of $M_1$.\n   * Equating the current through $M_1$ and $M_2$ at node $X$:\n     $$i_t = -g_{m1} v_x + \\frac{v_t - v_x}{r_{o1}} = g_{m2} v_t + \\frac{v_x}{r_{o2}}$$\n   Solving for $R_{\\text{out}} = \\frac{v_t}{i_t}$ yields:\n   $$R_{\\text{out}} = \\frac{g_{m1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}{g_{m2}\\left(g_{m1} + \\frac{1}{r_{o1}}\\right) + \\frac{1}{r_{o1} r_{o2}}} \\approx \\frac{1}{g_{m2}}$$\n   * **Physical Insight:** Even though $V_{\\text{out}}$ is connected only to the drain of $M_1$ and the gate of $M_2$, $M_1$ acts as a current conveyor that routes $M_2$'s drain current back to $V_{\\text{out}}$, making the output node behave like a diode-connected transistor with impedance $\\approx 1/g_{m2}$.\n\n---\n\n### 5. Summary of Key Parameters\n\n| Parameter | Exact Expression (Ideal Current Sources) | Approximation ($g_m r_o \\gg 1$) |\n| :--- | :--- | :--- |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\dfrac{1}{g_{m2}(1 + g_{m1} r_{o1}) + \\frac{1}{r_{o2}}}$ | $\\dfrac{1}{g_{m1} g_{m2} r_{o1}}$ |\n| **Transimpedance Gain ($R_T$)** | $\\dfrac{1 + g_{m1} r_{o1}}{g_{m2}(1 + g_{m1} r_{o1}) + \\frac{1}{r_{o2}}}$ | $\\dfrac{1}{g_{m2}}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\dfrac{g_{m1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}{g_{m2}\\left(g_{m1} + \\frac{1}{r_{o1}}\\right) + \\frac{1}{r_{o1} r_{o2}}}$ | $\\dfrac{1}{g_{m2}}$ |",
        "format": "markdown",
        "sha256": "d918fd94ccad98b7c134ece744486e4106c9000f70cedad2ec34e53026e8baaf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS input device and M2 as the PMOS feedback device, describes the feedback path to the input node, and derives the very low input resistance and transimpedance of approximately 1/gm2.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 8309,
        "total_tokens": 9430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 8309,
        "total_tokens": 9430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **feedback-enhanced Transimpedance Amplifier (TIA)** (also commonly analyzed as a **regulated common-gate stage** or an active current-to-voltage converter). It converts an input signal current ($I_{\\text{in}}$) into an output voltage ($V_{\\text{out}}$) while maintaining a very low input impedance.\n\nBelow is a complete analysis of the circuit covering its DC biasing, qualitative operation, and small-signal characteristics.\n\n---\n\n### 1. Circuit Topology and Qualitative Operation\n\nLet **Node $X$** denote the input node where $I_{\\text{in}}$, the source of NMOS $M_1$, the drain of PMOS $M_2$, and the bottom bias current source (let's call it $I_B$) meet.\n\n* **$M_1$ (NMOS):** Operates as a **common-gate (CG)** amplifier. Its gate is held at a fixed DC bias voltage $V_b$, its source is at the input node $X$, and its drain is at $V_{\\text{out}}$.\n* **$M_2$ (PMOS):** Operates as a **common-source (CS)** feedback device. Its gate is driven by $V_{\\text{out}}$, and its drain feeds current back to the input node $X$.\n\n#### **How the Negative Feedback Works:**\n1. Suppose the input current $I_{\\text{in}}$ increases slightly.\n2. This extra current injected into Node $X$ causes the voltage $V_X$ to rise slightly.\n3. Because the gate of $M_1$ is fixed at $V_b$, an increase in $V_X$ reduces $V_{GS1}$ ($V_{GS1} = V_b - V_X$).\n4. As $V_{GS1}$ drops, $M_1$ conducts less current, allowing the top current source $I_1$ to pull the output voltage $V_{\\text{out}}$ **up**.\n5. Since $V_{\\text{out}}$ is connected to the gate of the PMOS transistor $M_2$, a rise in $V_{\\text{out}}$ reduces the source-to-gate voltage of $M_2$ ($V_{SG2} = V_{DD} - V_{\\text{out}}$).\n6. Consequently, the drain current of $M_2$ ($I_{D2}$) **decreases** by just the right amount to absorb the increase in $I_{\\text{in}}$, holding $V_X$ nearly constant.\n\n---\n\n### 2. DC Biasing Analysis\n\nLet the unlabeled bottom current source sinking current to ground be $I_B$. Assuming $I_{\\text{in}} = 0$ at DC and both transistors are in saturation:\n\n1. **Drain Currents:**\n   * The top current source forces the DC drain current of $M_1$ to be:\n     $$I_{D1} = I_1$$\n   * Applying Kirchhoff's Current Law (KCL) at Node $X$:\n     $$I_{D1} + I_{D2} = I_B \\implies I_{D2} = I_B - I_1$$\n     *(Note: For $M_2$ to remain on, the circuit must be designed such that $I_B > I_1$).*\n\n2. **DC Node Voltages:**\n   * **Output Voltage ($V_{\\text{out}}$):** Set by the $V_{SG}$ of $M_2$ required to support $I_{D2} = I_B - I_1$:\n     $$V_{\\text{out}} = V_{DD} - V_{SG2} = V_{DD} - \\left( |V_{TH2}| + \\sqrt{\\frac{2(I_B - I_1)}{\\mu_p C_{ox} (W/L)_2}} \\right)$$\n   * **Input Node Voltage ($V_X$):** Set by the $V_{GS}$ of $M_1$ required to support $I_{D1} = I_1$:\n     $$V_X = V_b - V_{GS1} = V_b - \\left( V_{TH1} + \\sqrt{\\frac{2I_1}{\\mu_n C_{ox} (W/L)_1}} \\right)$$\n\n3. **Saturation Conditions:**\n   * **For $M_1$:** $V_{DS1} \\ge V_{GS1} - V_{TH1} \\implies V_{\\text{out}} \\ge V_b - V_{TH1}$\n   * **For $M_2$:** $V_{SD2} \\ge V_{SG2} - |V_{TH2}| \\implies V_X \\le V_{\\text{out}} + |V_{TH2}|$\n\n---\n\n### 3. Small-Signal Analysis\n\n#### **Case A: Ideal Transistors (Neglecting Channel-Length Modulation, $\\lambda = 0$)**\n\nIf we assume $r_{o1} \\to \\infty$, $r_{o2} \\to \\infty$, and ideal current sources:\n1. Since $I_1$ is an ideal DC current source (an AC open circuit), the small-signal drain current of $M_1$ must be zero ($i_{d1} = 0$).\n2. For $i_{d1} = g_{m1} v_{gs1} = -g_{m1} v_x = 0$, the small-signal voltage at Node $X$ must be zero:\n   $$v_x = 0 \\quad (\\text{Virtual AC Ground})$$\n3. This immediately gives the ideal **input impedance**:\n   $$R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = 0$$\n4. By KCL at Node $X$, all of the input signal current $i_{\\text{in}}$ must be absorbed by the drain of $M_2$:\n   $$i_{d2} = -i_{\\text{in}}$$\n5. For the PMOS $M_2$, the small-signal drain current (flowing out of its drain into Node $X$) is $i_{d2} = -g_{m2} v_{\\text{out}}$. Equating the two gives the **transimpedance gain ($R_T$)**:\n   $$-g_{m2} v_{\\text{out}} = -i_{\\text{in}} \\implies R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2}}$$\n\n---\n\n#### **Case B: Including Channel-Length Modulation ($r_{o1}, r_{o2} < \\infty$)**\n\nIn reality, the finite output resistances $r_{o1}$ and $r_{o2}$ make the voltage gain of $M_1$ finite, resulting in a small, non-zero input impedance. *(Note: Below, $g_{m1}$ represents $g_{m1} + g_{mb1}$ if body effect is present).*\n\n##### **1. Input Impedance ($R_{\\text{in}}$) and Transimpedance Gain ($R_T$)**\n* **KCL at $V_{\\text{out}}$:** Since $I_1$ is an AC open circuit, the net AC current through $M_1$ is zero:\n  $$i_{d1} = -g_{m1} v_x + \\frac{v_{\\text{out}} - v_x}{r_{o1}} = 0 \\implies v_{\\text{out}} = (1 + g_{m1} r_{o1}) v_x$$\n  *(If $I_1$ has a finite output resistance $R_{I1}$, $r_{o1}$ is roughly replaced by $r_{o1} \\parallel R_{I1}$ in the intrinsic gain term).*\n\n* **KCL at Node $X$:** Since $i_{d1} = 0$, all of $i_{\\text{in}}$ flows into the drain of $M_2$:\n  $$i_{\\text{in}} = g_{m2} v_{\\text{out}} + \\frac{v_x}{r_{o2}}$$\n\n* Substituting $v_{\\text{out}} = (1 + g_{m1} r_{o1}) v_x$ into the Node $X$ equation:\n  $$i_{\\text{in}} = \\left[ g_{m2}(1 + g_{m1} r_{o1}) + \\frac{1}{r_{o2}} \\right] v_x$$\n  Therefore, the **Input Impedance** is:\n  $$R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = \\frac{1}{g_{m2}(1 + g_{m1} r_{o1}) + \\frac{1}{r_{o2}}} \\approx \\frac{1}{g_{m1} r_{o1} g_{m2}}$$\n  *Insight:* A standard common-gate stage has an input resistance of $\\approx \\frac{1}{g_{m2}}$ (or $\\frac{1}{g_{m1}}$). Here, the active feedback loop boosts the effective transconductance by the intrinsic gain of $M_1$ ($g_{m1} r_{o1}$), reducing $R_{\\text{in}}$ by a factor of $(1 + g_{m1} r_{o1})$.\n\n* Substituting $v_x = \\frac{v_{\\text{out}}}{1 + g_{m1} r_{o1}}$ gives the exact **Transimpedance Gain**:\n  $$R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2} + \\frac{1}{r_{o2}(1 + g_{m1} r_{o1})}} \\approx \\frac{1}{g_{m2}}$$\n\n##### **2. Output Impedance ($R_{\\text{out}}$)**\nTo find $R_{\\text{out}}$, set $i_{\\text{in}} = 0$, apply a test voltage $v_t$ at $V_{\\text{out}}$, and find the test current $i_t$ entering the node:\n* The test current $i_t$ enters the drain of $M_1$ and exits its source into Node $X$:\n  $$i_t = -g_{m1} v_x + \\frac{v_t - v_x}{r_{o1}}$$\n* By KCL at Node $X$, this current $i_t$ must equal the current leaving Node $X$ through the drain of $M_2$:\n  $$i_t = g_{m2} v_t + \\frac{v_x}{r_{o2}}$$\n* Solving these two equations for $v_t / i_t$ yields:\n  $$R_{\\text{out}} = \\frac{v_t}{i_t} = \\frac{1 + (g_{m1} + g_{m2})r_{o1} + \\frac{r_{o1}}{r_{o2}}}{g_{m2}(1 + g_{m1} r_{o1}) + \\frac{1 + g_{m1} r_{o1}}{r_{o2}}}$$\n* For typical transistor parameters ($g_m r_o \\gg 1$), this simplifies to:\n  $$R_{\\text{out}} \\approx \\frac{1}{g_{m2}} + \\frac{1}{g_{m1} g_{m2} r_{o1}} \\approx \\frac{1}{g_{m2}}$$\n\n---\n\n### 4. Summary of Key Parameters\n\n| Parameter | Exact Expression (with $r_{o1}, r_{o2}$) | Standard Approximation ($g_m r_o \\gg 1$) |\n| :--- | :--- | :--- |\n| **DC Bias Current ($M_1$)** | $I_{D1} = I_1$ | $I_1$ |\n| **DC Bias Current ($M_2$)** | $I_{D2} = I_B - I_1$ | $I_B - I_1$ |\n| **Transimpedance Gain ($R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)** | $\\frac{1}{g_{m2} + \\frac{1}{r_{o2}(1 + g_{m1} r_{o1})}}$ | $\\frac{1}{g_{m2}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\frac{1}{g_{m2}(1 + g_{m1} r_{o1}) + \\frac{1}{r_{o2}}}$ | $\\frac{1}{g_{m1} r_{o1} g_{m2}}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\frac{1 + (g_{m1} + g_{m2})r_{o1} + \\frac{r_{o1}}{r_{o2}}}{(g_{m2} + \\frac{1}{r_{o2}})(1 + g_{m1} r_{o1})}$ | $\\frac{1}{g_{m2}}$ |\n\n### 5. Key Takeaways & Applications\n* **Extremely Low Input Impedance:** By placing the common-gate amplifier ($M_1$) inside a negative feedback loop with $M_2$, the input resistance is reduced by the intrinsic gain $g_{m1} r_{o1}$. This makes the circuit an exceptional **current buffer** or **current-sensing input stage** (e.g., for optical receivers / photodiode readout circuits) where the input node capacitance is isolated from slowing down the signal.\n* **Current Mirror Input:** If the gate of $M_2$ ($V_{\\text{out}}$) is connected to the gate of another PMOS transistor $M_3$ (whose source is also at $V_{DD}$), this circuit forms a **regulated/feedback-enhanced current mirror** with ultra-low input voltage compliance and ultra-low input resistance.",
        "format": "markdown",
        "sha256": "bdde030a3351e6f56ae7efb84b47a061d1a5162160acc5ff18314bdc8dd8d493"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, describes the feedback path to the input node, and gives the very low input resistance and approximately 1/gm2 transimpedance and output resistance.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 7703,
        "total_tokens": 8824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4590,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 7703,
        "total_tokens": 8824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4590,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit Overview and Topology\n\nThe circuit shown is a **shunt-feedback Transimpedance Amplifier (TIA)** (or an active current-input stage with negative feedback). It converts a small-signal input current $I_{\\text{in}}$ into an output voltage $V_{\\text{out}}$ while presenting a very low input impedance at the current injection node.\n\n* **$M_1$ (NMOS):** Operates as a **Common-Gate (CG)** stage. Its gate is tied to a fixed DC bias voltage $V_b$, its source is connected to the input node (let us label this node $X$), and its drain is connected to the output node $V_{\\text{out}}$.\n* **$M_2$ (PMOS):** Operates as a **Common-Source (CS)** stage in a negative feedback path. Its source is connected to $V_{DD}$, its gate is driven by $V_{\\text{out}}$, and its drain feeds current back into the input node $X$.\n* **$I_1$:** An ideal current source that sets the DC drain current of $M_1$ and acts as a high-impedance load at the $V_{\\text{out}}$ node.\n* **Bottom Current Source (let us denote it as $I_B$):** Sinks the total DC bias current from both $M_1$ and $M_2$ to ground.\n\n---\n\n### 2. DC Biasing Conditions\n\nWhen the AC input signal is zero ($I_{\\text{in}} = 0$):\n1. **Current in $M_1$:** Forced by the top current source:\n   $$I_{D1} = I_1$$\n2. **Current in $M_2$:** By Kirchhoff's Current Law (KCL) at node $X$:\n   $$I_{D1} + I_{D2} = I_B \\implies I_{D2} = I_B - I_1$$\n   *(For proper operation, the bias currents must be chosen such that $I_B > I_1$).*\n3. **DC Node Voltages:**\n   * The output DC voltage is fixed by the gate-source voltage required by $M_2$ to carry $I_{D2} = I_B - I_1$:\n     $$V_{\\text{out,DC}} = V_{DD} - V_{SG2}$$\n   * The input node DC voltage $V_X$ is fixed by the gate-source voltage required by $M_1$ to carry $I_{D1} = I_1$:\n     $$V_{X,\\text{DC}} = V_b - V_{GS1}$$\n\n---\n\n### 3. Intuitive Operation (Negative Feedback)\n\n1. Suppose $I_{\\text{in}}$ increases slightly, injecting current into node $X$ and causing the voltage $V_X$ to rise.\n2. Since the gate of $M_1$ is held constant at $V_b$, an increase in $V_X$ decreases $V_{GS1} = V_b - V_X$, which reduces the current pulled by $M_1$.\n3. Because $I_1$ is a constant current source, the excess current charges the output node, causing $V_{\\text{out}}$ to **increase sharply** (amplified by the intrinsic gain of $M_1$).\n4. As $V_{\\text{out}}$ (the gate of PMOS $M_2$) increases, the source-to-gate voltage $V_{SG2} = V_{DD} - V_{\\text{out}}$ decreases.\n5. Consequently, the drain current $I_{D2}$ flowing into node $X$ **decreases** until it absorbs the exact change in $I_{\\text{in}}$ ($\\Delta I_{D2} \\approx -I_{\\text{in}}$), holding $V_X$ nearly constant (a virtual ground for AC signals).\n\n---\n\n### 4. Small-Signal Analysis\n\nLet $g_{m1}, g_{m2}$ be the transconductances, $g_{mb1}$ be the body-effect transconductance of $M_1$, and $r_{o1}, r_{o2}$ be the output resistances of $M_1$ and $M_2$, respectively (assuming ideal bias current sources $I_1$ and $I_B$).\n\n#### A. KCL at the Output Node ($V_{\\text{out}}$)\nSince the ideal current source $I_1$ is an AC open circuit and the gate of $M_2$ draws no low-frequency current, the small-signal drain current of $M_1$ ($i_{d1}$) must be zero:\n$$i_{d1} = -(g_{m1} + g_{mb1})v_x + \\frac{v_{\\text{out}} - v_x}{r_{o1}} = 0$$\n\nRearranging gives the voltage gain from node $X$ to $V_{\\text{out}}$:\n$$v_{\\text{out}} = \\left[ (g_{m1} + g_{mb1})r_{o1} + 1 \\right] v_x \\tag{1}$$\n\n#### B. KCL at the Input Node ($X$)\nThe small-signal currents entering node $X$ are the input current $i_{\\text{in}}$, the source current of $M_1$ ($i_{d1}$), and the drain current of $M_2$ ($i_{d2}$):\n$$i_{\\text{in}} + i_{d1} + i_{d2} = 0$$\n\nSince $i_{d1} = 0$ from KCL at the output node, no small-signal current flows through $M_1$. All of the input signal current must flow into the drain of $M_2$:\n$$i_{\\text{in}} = -i_{d2} = g_{m2}v_{\\text{out}} + \\frac{v_x}{r_{o2}} \\tag{2}$$\n\n---\n\n#### C. Transimpedance Gain ($R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}}$)\nSubstituting $v_x = \\frac{v_{\\text{out}}}{(g_{m1} + g_{mb1})r_{o1} + 1}$ from Eq. (1) into Eq. (2):\n$$i_{\\text{in}} = \\left( g_{m2} + \\frac{1}{r_{o2}\\left[ (g_{m1} + g_{mb1})r_{o1} + 1 \\right]} \\right) v_{\\text{out}}$$\n\nThus, the transimpedance gain is:\n$$R_T = \\frac{v_{\\text{out}}}{i_{\\text{in}}} = \\frac{1}{g_{m2} + \\dfrac{1}{r_{o2}\\left[ (g_{m1} + g_{mb1})r_{o1} + 1 \\right]}} \\approx \\frac{1}{g_{m2}}$$\n\n---\n\n#### D. Input Resistance ($R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}}$)\nSubstituting $v_{\\text{out}}$ from Eq. (1) into Eq. (2):\n$$i_{\\text{in}} = \\left\\{ g_{m2}\\left[ (g_{m1} + g_{mb1})r_{o1} + 1 \\right] + \\frac{1}{r_{o2}} \\right\\} v_x$$\n\nThus, the input resistance looking into node $X$ is:\n$$R_{\\text{in}} = \\frac{v_x}{i_{\\text{in}}} = \\frac{1}{g_{m2}\\left[ (g_{m1} + g_{mb1})r_{o1} + 1 \\right] + \\dfrac{1}{r_{o2}}} \\approx \\frac{1}{g_{m2}(g_{m1} + g_{mb1})r_{o1}}$$\n\n*(Note: The negative feedback loop reduces the $\\frac{1}{g_{m2}}$ impedance of $M_2$ by a factor equal to the intrinsic gain of $M_1$, resulting in an extremely low input resistance).*\n\n---\n\n#### E. Output Resistance ($R_{\\text{out}}$)\nTo find $R_{\\text{out}}$, set $i_{\\text{in}} = 0$, apply a test voltage $v_t$ at $V_{\\text{out}}$, and measure the test current $i_t = i_{d1}$ flowing into the drain of $M_1$:\n1. At the drain of $M_1$:\n   $$i_t = -(g_{m1} + g_{mb1})v_x + \\frac{v_t - v_x}{r_{o1}}$$\n2. By KCL at node $X$ ($i_t + i_{d2} = 0$):\n   $$i_t = -i_{d2} = g_{m2}v_t + \\frac{v_x}{r_{o2}} \\implies v_x = r_{o2}(i_t - g_{m2}v_t)$$\n\nSubstituting $v_x$ into the first equation and solving for $\\frac{v_t}{i_t}$ yields:\n$$R_{\\text{out}} = \\frac{r_{o1} + \\left[ (g_{m1} + g_{mb1})r_{o1} + 1 \\right] r_{o2}}{1 + g_{m2}r_{o2}\\left[ (g_{m1} + g_{mb1})r_{o1} + 1 \\right]} \\approx \\frac{1}{g_{m2}}$$\n\n*(Intuitively, a voltage change $\\Delta V_{\\text{out}}$ generates a current $g_{m2}\\Delta V_{\\text{out}}$ in $M_2$, which flows into the source of $M_1$ and exits its drain back to the $V_{\\text{out}}$ node, making the output impedance look like $\\frac{1}{g_{m2}}$).*\n\n---\n\n### 5. Summary of Key Parameters\n\n| Parameter | Exact Expression | Approximation ($g_m r_o \\gg 1$) |\n| :--- | :--- | :--- |\n| **Transimpedance Gain ($R_T$)** | $\\dfrac{1}{g_{m2} + \\dfrac{1}{r_{o2}\\left[ (g_{m1} + g_{mb1})r_{o1} + 1 \\right]}}$ | $\\dfrac{1}{g_{m2}}$ |\n| **Input Resistance ($R_{\\text{in}}$)** | $\\dfrac{1}{g_{m2}\\left[ (g_{m1} + g_{mb1})r_{o1} + 1 \\right] + \\dfrac{1}{r_{o2}}}$ | $\\dfrac{1}{g_{m2}(g_{m1} + g_{mb1})r_{o1}}$ |\n| **Output Resistance ($R_{\\text{out}}$)** | $\\dfrac{r_{o1} + \\left[ (g_{m1} + g_{mb1})r_{o1} + 1 \\right] r_{o2}}{1 + g_{m2}r_{o2}\\left[ (g_{m1} + g_{mb1})r_{o1} + 1 \\right]}$ | $\\dfrac{1}{g_{m2}}$ |",
        "format": "markdown",
        "sha256": "88b1c38fac501eec066947fcea9edf5e69d96aad7293b86bebb4f2a691806ccd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback path, and gives the required very low input resistance and approximately 1/gm2 transimpedance and output resistance.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 7111,
        "total_tokens": 8232,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4559,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 7111,
        "total_tokens": 8232,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4559,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the circuit will **not** fail to oscillate—it will simply oscillate at a lower frequency (assuming the three capacitors remain equal and each inverter has a DC voltage gain greater than 2).\n\nHere is both the frequency-domain (small-signal) and time-domain (large-signal) explanation for why this happens:\n\n---\n\n### 1. Small-Signal Analysis (Barkhausen Criteria)\n\nTo determine if the oscillator will start up from its metastable DC bias point (where $V_{\\text{in}} = V_{\\text{out}}$ for each stage), we linearize the circuit around that point. \n\nLet each inverter have a small-signal DC voltage gain of $-A_0 = -g_m R_{\\text{out}}$ and an output resistance $R_{\\text{out}}$. With a load capacitance $C_L$ at each node, the transfer function of a single stage is:\n\n$$H(s) = -\\frac{A_0}{1 + \\frac{s}{\\omega_p}}$$\n\nwhere the pole frequency at each node is:\n\n$$\\omega_p = \\frac{1}{R_{\\text{out}} C_L}$$\n\nBecause the three stages are identical, the total open-loop transfer function around the ring is:\n\n$$L(s) = -H(s)^3 = -\\left(\\frac{A_0}{1 + \\frac{s}{\\omega_p}}\\right)^3$$\n\nFor the circuit to oscillate according to the Barkhausen criteria:\n1. **Phase Condition:** The frequency-dependent phase shift must reach $180^\\circ$ (to combine with the $180^\\circ$ DC inversion from the three inverters, yielding $360^\\circ$ of total phase shift). Because the three poles are identical, each stage must contribute exactly $60^\\circ$ of phase lag at the oscillation frequency $\\omega_{\\text{osc}}$:\n   $$\\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_p}\\right) = 60^\\circ \\implies \\frac{\\omega_{\\text{osc}}}{\\omega_p} = \\tan(60^\\circ) = \\sqrt{3}$$\n   $$\\omega_{\\text{osc}} = \\frac{\\sqrt{3}}{R_{\\text{out}} C_L}$$\n\n2. **Magnitude Condition:** The magnitude of the loop gain at $\\omega_{\\text{osc}}$ must be at least $1$:\n   $$|L(j\\omega_{\\text{osc}})| = \\left( \\frac{A_0}{\\sqrt{1 + \\left(\\frac{\\omega_{\\text{osc}}}{\\omega_p}\\right)^2}} \\right)^3 = \\left( \\frac{A_0}{\\sqrt{1 + 3}} \\right)^3 = \\left(\\frac{A_0}{2}\\right)^3 \\ge 1$$\n\nThis simplifies to the well-known startup condition for a 3-stage ring oscillator:\n\n$$A_0 \\ge 2$$\n\n**Key Takeaway:** Notice that $C_L$ completely cancels out of the magnitude condition. When all three capacitors become arbitrarily large together, all three poles $\\omega_p$ move toward zero at the exact same rate. The circuit still reaches a $180^\\circ$ phase shift before the loop gain drops below unity; it just does so at a proportionally lower frequency $\\omega_{\\text{osc}}$.\n\n---\n\n### 2. Large-Signal (Time-Domain) Intuition\n\nIn the time domain, once the oscillation grows to full logic levels, the capacitors simply limit the slew rate (or RC charging/discharging time) at the output of each inverter. \n\n* The propagation delay of each stage is proportional to the load capacitance: $t_d \\propto R_{\\text{out}} C_L$.\n* Since an odd number of inverters cannot find a stable digital state (e.g., $0 \\to 1 \\to 0 \\to 1$), the transition edge endlessly chases itself around the loop with a period of:\n  $$T_{\\text{osc}} = 6 t_d \\propto 6 R_{\\text{out}} C_L$$\n\nMaking $C_L$ arbitrarily large simply makes the propagation delay $t_d$ arbitrarily long, slowing the oscillation down without ever stopping it.\n\n---\n\n### Note: Why is this often asked as a trick question?\nThis question is usually contrasted with making **only one** of the three capacitors very large. \n* If **only one** capacitor becomes very large, it creates a single *dominant pole* (exactly like Miller compensation in an op-amp). That single pole can contribute at most $90^\\circ$ of phase shift while attenuating the loop gain below $1$ long before the other two high-frequency poles can contribute the remaining $90^\\circ$. In *that* asymmetric case, the circuit **does** fail to oscillate. \n* When **all three** become large together, no single pole dominates over the others, so oscillation is always preserved.",
        "format": "markdown",
        "sha256": "1792702c6a213e7c4af457df809a83d7c612f5168e402f381b269c7a5f1fcedb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal capacitors slow the ring oscillator without stopping it, and supports this with the correct phase/gain condition and frequency scaling inversely with capacitance. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1142,
        "output_tokens": 2828,
        "total_tokens": 3970,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1749,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1142,
        "output_tokens": 2828,
        "total_tokens": 3970,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1749,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the circuit will **not** fail to oscillate. As long as all three capacitors are equal, increasing $C_L$ to an arbitrarily large value will simply make the circuit oscillate at an **arbitrarily low frequency** (an arbitrarily long period), without stopping the oscillation.\n\nWe can verify this from both small-signal (frequency-domain) and large-signal (time-domain) perspectives:\n\n---\n\n### 1. Small-Signal (Frequency-Domain) Analysis\nIf the circuit Starts at its metastable DC equilibrium point (where $V_{\\text{in}} = V_{\\text{out}}$ for all three inverters), each stage can be modeled as a single-pole inverting amplifier with transfer function:\n$$H(s) = \\frac{-A_0}{1 + \\frac{s}{\\omega_0}}$$\nwhere:\n* $A_0 = g_m R_{\\text{out}}$ is the low-frequency small-signal voltage gain of a single inverter.\n* $\\omega_0 = \\frac{1}{R_{\\text{out}} C_L}$ is the $-3\\text{ dB}$ bandwidth (pole frequency) at each node.\n\nThe total loop transfer function for the three identical stages is:\n$$L(s) = -\\left( \\frac{-A_0}{1 + \\frac{s}{\\omega_0}} \\right)^3 = \\frac{A_0^3}{\\left(1 + \\frac{s}{\\omega_0}\\right)^3}$$\n\nAccording to the **Barkhausen criterion**, oscillation begins at the frequency $\\omega_{\\text{osc}}$ where the three poles contribute a total phase shift of $-180^\\circ$ (i.e., $-60^\\circ$ per stage):\n$$\\tan^{-1}\\!\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 60^\\circ \\implies \\omega_{\\text{osc}} = \\sqrt{3}\\,\\omega_0 = \\frac{\\sqrt{3}}{R_{\\text{out}} C_L}$$\n\nEvaluating the magnitude of the loop gain at $\\omega_{\\text{osc}} = \\sqrt{3}\\,\\omega_0$:\n$$|L(j\\omega_{\\text{osc}})| = \\frac{A_0^3}{\\left(\\sqrt{1 + \\left(\\frac{\\sqrt{3}\\omega_0}{\\omega_0}\\right)^2}\\right)^3} = \\frac{A_0^3}{\\left(\\sqrt{1 + 3}\\right)^3} = \\frac{A_0^3}{8}$$\n\nNotice that **$\\omega_0$ (and therefore $C_L$) completely cancels out** of the loop-gain magnitude condition! Regardless of how large $C_L$ is, each pole attenuates the signal by a factor of exactly $2$ at the frequency where it shifts the phase by $-60^\\circ$. Therefore, as long as each inverter has a DC gain **$A_0 > 2$**, the equilibrium point remains unstable and the circuit will oscillate.\n\n---\n\n### 2. Large-Signal (Time-Domain) Analysis\nFrom a large-signal switching perspective, a 3-stage ring oscillator has no stable DC digital state (since an odd number of inversions cannot satisfy $V_1 = \\overline{V_1}$). \n\nEach transition propagates around the loop with a stage delay $t_d \\propto R_{\\text{on}} C_L$. The oscillation frequency is given by:\n$$f_{\\text{osc}} = \\frac{1}{2 N t_d} = \\frac{1}{6 t_d} \\propto \\frac{1}{C_L}$$\n\nMaking $C_L$ arbitrarily large simply increases the charging and discharging time $t_d$ proportionally, slowing the oscillation down without ever creating a stable latch state.\n\n---\n\n### Common Point of Confusion: All Three vs. Only One Capacitor\nThis question is a classic conceptual trap because students often confuse **scaling all three poles together** with **dominant-pole compensation**:\n* **All three $C_L \\to \\infty$ equally:** All three poles move toward the origin together ($\\omega_0 \\to 0$). Because their ratio remains $1:1:1$, the phase shift still reaches $-180^\\circ$ before the loop gain drops below unity. **It always oscillates.**\n* **Only *one* capacitor becomes very large:** If only one capacitor is made much larger than the other two, it creates a single dominant pole that rolls off the loop gain at $-20\\text{ dB/decade}$ while contributing at most $-90^\\circ$ of phase shift. The loop gain drops below $1$ before the other two high-frequency poles can supply the remaining $-90^\\circ$, and **the circuit stops oscillating**.",
        "format": "markdown",
        "sha256": "dc122e8ee5b61bf478e4e0ffa8b8fcbd491fdb6ec346ebf427dcf7c4f197a498"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal capacitors do not stop oscillation and that frequency falls as capacitance increases. Both the delay argument and small-signal phase/gain analysis support the conclusion, as required for full credit.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1142,
        "output_tokens": 2913,
        "total_tokens": 4055,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1874,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1142,
        "output_tokens": 2913,
        "total_tokens": 4055,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1874,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No**, the circuit will **not** fail to oscillate as the three capacitors ($C_L$) become arbitrarily large (as long as they remain finite and roughly equal). Instead, the circuit will continue to oscillate, just at an **arbitrarily low frequency**.\n\nWe can verify this from both a small-signal (linear stability) perspective and a large-signal (time-domain) perspective:\n\n---\n\n### 1. Small-Signal Analysis (Barkhausen Criterion)\n\nAssume the ring oscillator starts at its metastable DC equilibrium point where the input and output of each inverter are equal ($V_{\\text{in}} = V_{\\text{out}} = V_M$). Around this bias point, each inverter has a small-signal DC voltage gain of $-A_0$ and an output resistance $R_{\\text{out}}$. \n\nWith a load capacitance $C_L$ at each node, each stage has a single pole at:\n$$\\omega_0 = \\frac{1}{R_{\\text{out}} C_L}$$\n\nThe open-loop transfer function of the three-stage loop is:\n$$L(s) = -\\left( \\frac{A_0}{1 + \\frac{s}{\\omega_0}} \\right)^3$$\n\nFor the circuit to be unstable at DC and build up oscillations (by the Barkhausen criterion), the three poles must contribute an additional $-180^\\circ$ of phase shift at the oscillation frequency $\\omega_{\\text{osc}}$, meaning each identical stage must contribute $-60^\\circ$:\n$$\\arctan\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 60^\\circ \\implies \\omega_{\\text{osc}} = \\sqrt{3}\\,\\omega_0 = \\frac{\\sqrt{3}}{R_{\\text{out}} C_L}$$\n\nAt this frequency, the magnitude of the loop gain must be greater than $1$:\n$$|L(j\\omega_{\\text{osc}})| = \\left( \\frac{A_0}{\\sqrt{1 + \\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right)^2}} \\right)^3 = \\left( \\frac{A_0}{\\sqrt{1 + 3}} \\right)^3 = \\left( \\frac{A_0}{2} \\right)^3 \\ge 1$$\n\nThis simplifies to the well-known startup condition for a 3-stage ring oscillator:\n$$A_0 \\ge 2$$\n\n**Key takeaway:** The condition for oscillation ($A_0 \\ge 2$) is **completely independent of $C_L$**. Because all three poles scale together as $C_L$ increases, the ratio between the pole frequency $\\omega_0$ and the phase-crossover frequency $\\omega_{\\text{osc}}$ remains fixed at $\\sqrt{3}$. The attenuation introduced by the capacitors at the oscillation frequency is always a factor of $2$ per stage, regardless of how large $C_L$ becomes.\n\n---\n\n### 2. Large-Signal (Time-Domain) Intuition\n\nFrom a digital switching perspective:\n* An odd number of inverters in a loop has no stable DC operating point (assuming normal inverter gain $A_0 > 1$). For instance, a `0` at the input of the first inverter ripples through to become `1` → `0` → `1` at the output of the third inverter, which feeds back to flip the first inverter.\n* The load capacitor $C_L$ simply limits the slew rate ($dV/dt = I_{\\text{drive}} / C_L$), increasing the propagation delay $t_p$ of each stage proportionally to $C_L$.\n* Since the oscillation frequency is given by:\n  $$f_{\\text{osc}} = \\frac{1}{6 t_p} \\propto \\frac{1}{C_L}$$\n  making $C_L$ arbitrarily large simply stretches the time axis—making the oscillation period arbitrarily long—without stopping the oscillation.\n\n---\n\n### Important Contrast: What if only *one* capacitor becomes large?\nStudents often confuse this problem with **dominant-pole compensation**. \n* If only **one** capacitor becomes extremely large while the other two remain small, one pole moves very close to the origin while the other two stay at high frequencies. By the time the loop phase shift reaches $180^\\circ$ (near the high-frequency poles), the single large capacitor attenuates the signal so heavily that the loop gain drops below $1$, and the circuit **will fail to oscillate** (it becomes a stable feedback loop biased at $V_M$). \n* However, when **all three** capacitors grow together, the three poles remain co-located, preventing dominant-pole stabilization.",
        "format": "markdown",
        "sha256": "2443756ae0d72b248fb7b0e4cf5cb0f081b60fa55817df46ca06fb1eb99003d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency as all three capacitances increase. Both the delay argument and the small-signal analysis support the result, including the capacitance-independent startup condition.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1142,
        "output_tokens": 2674,
        "total_tokens": 3816,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1658,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1142,
        "output_tokens": 2674,
        "total_tokens": 3816,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1658,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The effect of doubling the three load capacitors ($C_L \\rightarrow 2C_L$) on the phase noise of the 3-stage CMOS ring oscillator depends on whether you evaluate the phase noise at a **fixed offset frequency ($\\Delta f$)**, **normalized to the oscillation frequency ($\\Delta f / f_0$)**, or at a **constant oscillation frequency ($f_0$)**.\n\nHere is the summary of all three cases, followed by the step-by-step physical derivation:\n\n### Summary of Results\n\n1. **Unchanged Inverters, Fixed Offset Frequency ($\\Delta f$):** \n   * **Phase noise decreases by a factor of 4 (improves by $6\\text{ dB}$).** \n   * Doubling $C_L$ halves the oscillation frequency ($f_0 \\rightarrow f_0/2$). Because ring oscillator phase noise scales as $\\mathcal{L}(\\Delta f) \\propto (f_0 / \\Delta f)^2 \\propto 1/C_L^2$, halving $f_0$ reduces $\\mathcal{L}(\\Delta f)$ at a fixed $\\Delta f$ by $4\\times$.\n2. **Unchanged Inverters, Normalized to Carrier Frequency (Fixed $\\Delta f / f_0$ or Frequency-Scaled):** \n   * **Phase noise remains unchanged ($0\\text{ dB}$ change).** \n   * Although a larger capacitor reduces the integrated thermal voltage noise ($\\sigma_v^2 \\propto kT/C_L$), it also slows down the transition slew rate ($\\text{SR} \\propto I_D/C_L$), making the circuit more sensitive to voltage noise during threshold crossings. These two effects cancel out in the absolute timing jitter rate.\n3. **Constant Oscillation Frequency ($f_0$ kept constant by doubling inverter widths/current):** \n   * **Phase noise decreases by a factor of 2 (improves by $3\\text{ dB}$)** at the expense of doubling the power consumption.\n\n---\n\n### Step-by-Step Physical Derivation\n\n#### 1. Effect on Oscillation Frequency ($f_0$)\nAssuming the inverters remain unchanged (same transistor sizes $W/L$, supply voltage $V_{DD}$, and charging/discharging current $I_D$), the propagation delay of each stage is proportional to the load capacitance:\n$$t_d \\propto \\frac{C_L V_{DD}}{I_D}$$\n\nFor an $N$-stage ring oscillator ($N = 3$), the oscillation period is $T_0 = 2N t_d$, so the oscillation frequency is:\n$$f_0 = \\frac{1}{T_0} \\propto \\frac{I_D}{2 N C_L V_{DD}} \\propto \\frac{1}{C_L}$$\nDoubling $C_L$ **halves the oscillation frequency** ($f_0 \\rightarrow f_0 / 2$).\n\n---\n\n#### 2. Effect on Voltage Noise and Timing Jitter\nDuring each switching transition of duration $t_d$, the transistor channel thermal noise current (with power spectral density $S_{i_n} = 4kT\\gamma g_m$) is integrated onto $C_L$. The resulting voltage noise variance on the capacitor is:\n$$\\sigma_v^2 \\propto \\frac{S_{i_n} \\cdot t_d}{C_L^2} \\propto \\frac{kT}{C_L}$$\nDoubling $C_L$ reduces the RMS voltage noise $\\sigma_v$ by a factor of $\\sqrt{2}$.\n\nTo find the **timing jitter variance ($\\sigma_{t_d}^2$)** per transition, we divide the voltage noise variance by the square of the transition slew rate ($\\text{SR} = I_D / C_L$):\n$$\\sigma_{t_d}^2 = \\frac{\\sigma_v^2}{\\text{SR}^2} \\propto \\frac{kT / C_L}{(I_D / C_L)^2} = \\frac{kT C_L}{I_D^2}$$\n\nOver one full oscillation period $T_0$ ($2N$ independent transitions), the cycle-to-cycle period jitter variance is:\n$$\\sigma_T^2 = 2N \\sigma_{t_d}^2 \\propto \\frac{2N kT C_L}{I_D^2} \\propto C_L$$\nThus, doubling $C_L$ **doubles the period jitter variance $\\sigma_T^2$** (RMS period jitter increases by $\\sqrt{2}$).\n\n---\n\n#### 3. Conversion to Phase Noise $\\mathcal{L}(\\Delta f)$\nPhase noise $\\mathcal{L}(\\Delta f)$ at an offset frequency $\\Delta f$ is related to the period jitter variance $\\sigma_T^2$ by:\n$$\\mathcal{L}(\\Delta f) = \\frac{f_0^3 \\sigma_T^2}{2 \\Delta f^2}$$\n\nSubstituting how $f_0$ and $\\sigma_T^2$ scale with $C_L$:\n* $f_0 \\propto \\frac{1}{C_L} \\implies f_0^3 \\propto \\frac{1}{C_L^3}$\n* $\\sigma_T^2 \\propto C_L$\n\nPutting these together gives the standard ring oscillator phase noise scaling law:\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{1}{C_L^3} \\cdot \\frac{C_L}{\\Delta f^2} = \\frac{1}{C_L^2 \\Delta f^2} \\quad \\text{or equivalently} \\quad \\mathcal{L}(\\Delta f) \\propto \\frac{kT}{I_D V_{DD}} \\left(\\frac{f_0}{\\Delta f}\\right)^2$$\n\n*(Note: This also follows directly from the Hajimiri–Lee Impulse Sensitivity Function model, where $\\mathcal{L}(\\Delta f) \\propto \\frac{\\overline{i_n^2}/\\Delta f}{q_{\\text{max}}^2 \\Delta f^2}$, and the maximum charge swing $q_{\\text{max}} = C_L V_{DD}$ doubles when $C_L$ is doubled.)*\n\nFrom this expression, the three interpretations become clear:\n* **At a fixed offset $\\Delta f$ (with unchanged inverters):** Since $\\mathcal{L}(\\Delta f) \\propto 1/C_L^2$, doubling $C_L$ reduces $\\mathcal{L}(\\Delta f)$ by a factor of $2^2 = 4$ (**$-6\\text{ dB}$**).\n* **At a fixed fractional offset $\\Delta f / f_0$ (or normalized to the carrier frequency):** Since $I_D$ and $V_{DD}$ are unchanged, $\\mathcal{L}(\\Delta f)$ at a constant $\\Delta f / f_0$ ratio is **unchanged ($0\\text{ dB}$)**.\n* **If $f_0$ is kept constant by doubling the inverter widths ($I_D \\rightarrow 2I_D$):** Both $\\Delta f$ and $f_0$ remain fixed while $I_D$ doubles, so $\\mathcal{L}(\\Delta f)$ decreases by a factor of $2$ (**$-3\\text{ dB}$**).",
        "format": "markdown",
        "sha256": "c16fd75a6e31ab8e4fba5f67eb1698913e5b0069ae6e73ae1bfdd8df93ad47d9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about a factor of four (6 dB) at a fixed offset, with appropriate scaling justification. The additional offset and retuning cases do not undermine the essential answer.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 7441,
        "total_tokens": 8582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5843,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 7441,
        "total_tokens": 8582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5843,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming that the load capacitors $C_L$ dominate the total capacitance at each node and the inverters themselves are kept unchanged, **the phase noise at a given offset frequency $\\Delta \\omega$ decreases by a factor of 4 (i.e., improves by 6 dB).**\n\nHere is the step-by-step derivation from both the frequency-domain (Razavi's model) and time-domain (jitter) perspectives:\n\n---\n\n### 1. Effect on Oscillation Frequency ($f_0$)\nThe delay of each inverter stage is proportional to the load capacitance:\n$$t_d \\propto \\frac{C_L V_{DD}}{I_{D}}$$\nSince the oscillation frequency is $f_0 = \\frac{1}{2 N t_d}$ (with $N = 3$), doubling $C_L$ while keeping the inverters (and thus their drive current $I_D$) constant **halves the oscillation frequency**:\n$$f_0' = \\frac{1}{2} f_0 \\quad \\text{or} \\quad \\omega_0' = \\frac{1}{2} \\omega_0$$\n\n---\n\n### 2. Effect on Power Consumption ($P$)\nThe average dynamic power dissipated by the three-stage CMOS ring oscillator is:\n$$P = 3 C_L V_{DD}^2 f_0$$\nWhen $C_L$ is doubled ($2C_L$) and $f_0$ is halved ($f_0/2$), their product remains constant:\n$$P' = 3 (2C_L) V_{DD}^2 \\left(\\frac{f_0}{2}\\right) = P$$\nThus, the average power consumption $P$ (and average supply current $I_{DD}$) **remains unchanged**.\n\n---\n\n### 3. Effect on Phase Noise ($\\mathcal{L}\\{\\Delta \\omega\\}$)\nThe phase noise of a CMOS ring oscillator at an offset frequency $\\Delta \\omega$ from the carrier is given by (from B. Razavi, *RF Microelectronics*):\n$$\\mathcal{L}\\{\\Delta \\omega\\} = \\frac{8}{3\\eta} \\frac{kT}{P} \\frac{V_{DD}}{V_{\\text{char}}} \\left(\\frac{\\omega_0}{\\Delta \\omega}\\right)^2$$\n\n*(Note: Using the small-signal linear model yields the same proportionality: $\\mathcal{L}\\{\\Delta \\omega\\} \\propto \\frac{R_L^2 S_{i_n}}{V_{\\text{swing}}^2} \\left(\\frac{\\omega_0}{\\Delta \\omega}\\right)^2$, where $R_L$, $S_{i_n}$, and $V_{\\text{swing}}$ are independent of $C_L$.)*\n\nEvaluating how each term changes when $C_L \\to 2C_L$:\n* **$P$, $V_{DD}$, and $V_{\\text{char}}$** remain **constant**.\n* **$\\omega_0$** is reduced by a **factor of 2**.\n\nTherefore:\n1. **At a fixed offset frequency $\\Delta \\omega$:**\n   $$\\mathcal{L}'\\{\\Delta \\omega\\} \\propto \\left(\\frac{\\omega_0 / 2}{\\Delta \\omega}\\right)^2 = \\frac{1}{4} \\mathcal{L}\\{\\Delta \\omega\\}$$\n   The phase noise **decreases by a factor of 4 (improves by $6\\text{ dB}$)**.\n\n2. **At a fixed relative offset ($\\Delta \\omega / \\omega_0 = \\text{constant}$):**\n   If the offset frequency is scaled proportionally with the carrier frequency, the phase noise **remains unchanged ($0\\text{ dB}$ change)**.\n\n---\n\n### 4. Time-Domain (Jitter) Intuition\nYou can also verify this through time-domain noise integration during each transition:\n1. **Voltage Noise ($\\sigma_v^2$):** Integrating the inverter's channel thermal noise current onto $C_L$ during a transition gives a voltage variance of $\\sigma_v^2 \\propto \\frac{kT}{C_L}$, which is **halved** when $C_L$ is doubled.\n2. **Slew Rate ($dV/dt$):** The transition slope is $\\frac{dV}{dt} = \\frac{I_D}{C_L}$, which is also **halved** (so $(dV/dt)^2$ decreases by a factor of $4$).\n3. **Jitter per Transition ($\\sigma_{\\Delta t}^2$):** The timing variance per transition is:\n   $$\\sigma_{\\Delta t}^2 = \\frac{\\sigma_v^2}{(dV/dt)^2} \\propto \\frac{1/C_L}{(1/C_L)^2} = C_L$$\n   Thus, the timing jitter variance per edge **doubles**.\n4. **Accumulated Jitter & Phase Noise:** Because the oscillation frequency is halved, there are **half as many transitions per second**. Over any fixed observation time $\\tau$, the accumulated absolute timing jitter variance ($\\sigma_{t,\\text{total}}^2 \\propto f_0 \\tau \\cdot \\sigma_{\\Delta t}^2$) **remains unchanged**. Converting time jitter to phase jitter gives:\n   $$\\sigma_{\\phi}^2 = \\omega_0^2 \\sigma_{t,\\text{total}}^2 \\propto \\omega_0^2$$\n   Since $\\omega_0$ is halved, the phase variance $\\sigma_\\phi^2$ (and thus the phase noise $\\mathcal{L}\\{\\Delta \\omega\\}$) **decreases by a factor of 4 ($6\\text{ dB}$)**.",
        "format": "markdown",
        "sha256": "3fa04584cbd972fa464995dd467fe684a5fa1ae4ab550cb8748f3f67111e1f4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors approximately halves the oscillation frequency and, using the squared frequency scaling at a fixed offset, gives a fourfold phase-noise reduction (about 6 dB), as required.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 7768,
        "total_tokens": 8909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6532,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 7768,
        "total_tokens": 8909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6532,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Depending on whether you evaluate phase noise at a **fixed offset frequency** or **normalized to the oscillation frequency**, doubling the three load capacitors ($C_L \\rightarrow 2C_L$) while keeping the inverters unchanged has the following effects:\n\n1. **At a fixed offset frequency ($\\Delta \\omega$):** The phase noise **decreases by a factor of 4 (improves by $6\\text{ dB}$)**, purely because the oscillation frequency ($\\omega_0$) is cut in half.\n2. **Normalized to the carrier frequency (fixed $\\Delta \\omega / \\omega_0$ or scaled back to the same target frequency in a PLL):** The phase noise **remains unchanged ($0\\text{ dB}$ difference)**.\n3. **If transistor widths ($W$) are also doubled to keep $\\omega_0$ constant:** The phase noise **decreases by a factor of 2 (improves by $3\\text{ dB}$)** at the expense of doubling the power consumption.\n\n---\n\n### 1. Frequency-Domain (Linear / Leeson's Model) Derivation\n\nFor a 3-stage ring oscillator, the oscillation frequency is inversely proportional to the load capacitance:\n$$\\omega_0 \\propto \\frac{1}{C_L}$$\n\nDoubling $C_L$ halves the oscillation frequency ($\\omega_0 \\rightarrow \\omega_0 / 2$). \n\nMeanwhile, the average dynamic power dissipation of the 3-stage CMOS ring oscillator is:\n$$P = 3 C_L V_{DD}^2 f_0$$\nBecause $C_L$ doubles and $f_0$ halves, their product cancels out, meaning **average power dissipation $P$ remains constant**.\n\nUsing the standard ring-oscillator phase noise expression at an offset $\\Delta \\omega$:\n$$\\mathcal{L}(\\Delta \\omega) \\propto \\frac{k T \\gamma G_m}{C_L^2 V_{\\text{swing}}^2 \\Delta \\omega^2} \\propto \\frac{kT}{P}\\left(\\frac{\\omega_0}{\\Delta \\omega}\\right)^2$$\n\n* **At a fixed offset $\\Delta \\omega$:** Since $C_L$ is doubled (or equivalently, $\\omega_0$ is halved at constant $P$), $\\mathcal{L}(\\Delta \\omega) \\propto 1/C_L^2$ **drops by a factor of 4 ($-6\\text{ dB}$)**.\n* **Normalized to $\\omega_0$:** If the oscillator must synthesize a fixed target frequency (for example, inside a PLL where the feedback division ratio $N$ must be doubled to compensate for the halved VCO frequency), multiplying the frequency by $2$ adds $20\\log_{10}(2) = +6\\text{ dB}$ to the phase noise, resulting in **no net change ($0\\text{ dB}$)**.\n\n---\n\n### 2. Time-Domain (Jitter & Slew-Rate) Intuition\n\nIt is a common misconception that doubling $C_L$ directly reduces jitter because the integrated thermal voltage noise ($\\overline{v_n^2} \\propto kT/C_L$) is halved. Tracing the transition dynamics shows why the effects cancel out in absolute time:\n\n1. **Voltage Noise ($\\overline{v_n^2}$):** Doubling $C_L$ reduces the voltage noise variance on each node by a factor of $2$:\n   $$\\overline{v_n^2} \\propto \\frac{kT}{C_L} \\quad \\xrightarrow{C_L \\rightarrow 2C_L} \\quad \\frac{1}{2}\\overline{v_n^2}$$\n\n2. **Slew Rate ($SR$):** With the inverter drive current $I_D$ unchanged, doubling $C_L$ halves the transition slope (slew rate):\n   $$SR = \\frac{dV}{dt} = \\frac{I_D}{C_L} \\quad \\xrightarrow{C_L \\rightarrow 2C_L} \\quad \\frac{1}{2}SR$$\n\n3. **Timing Jitter per Transition ($\\sigma_{\\Delta t}^2$):** Timing jitter variance per stage is the voltage noise variance divided by the square of the slew rate. Thus, the jitter per transition actually **doubles** (RMS jitter increases by $\\sqrt{2}$):\n   $$\\sigma_{\\Delta t}^2 = \\frac{\\overline{v_n^2}}{SR^2} \\propto \\frac{kT / C_L}{(I_D / C_L)^2} = \\frac{kT C_L}{I_D^2} \\propto C_L$$\n\n4. **Accumulated Timing Jitter over Fixed Time $\\tau$ ($\\sigma_t^2(\\tau)$):** Because the oscillation period $T_0 \\propto C_L$ also doubles, only **half as many transitions** occur in a given time interval $\\tau$. Summing half as many transitions, each with twice the jitter variance, leaves the **absolute timing jitter unchanged**:\n   $$\\sigma_t^2(\\tau) = \\left(\\frac{\\tau}{T_0}\\right) \\sigma_{T_0}^2 \\propto \\left(\\frac{1}{C_L}\\right) \\cdot C_L = \\text{constant}$$\n\n5. **Conversion to Phase ($\\Delta \\phi = \\omega_0 \\Delta t$):** Because the absolute timing error $\\Delta t$ is unchanged while $\\omega_0$ is halved, the **phase error $\\Delta \\phi$ is halved**, reducing the phase noise power spectral density $S_\\phi(\\Delta \\omega) \\propto (\\Delta \\phi)^2$ by a factor of **$2^2 = 4$ ($-6\\text{ dB}$)** at a fixed offset $\\Delta \\omega$.\n\n---\n\n### Summary Table\n\n| Quantity | Scaling with $C_L$ | Effect of Doubling $C_L$ ($C_L \\rightarrow 2C_L$) |\n| :--- | :---: | :--- |\n| **Oscillation Frequency ($\\omega_0$)** | $\\propto 1/C_L$ | Halved ($\\times 0.5$) |\n| **Average Power ($P$)** | $\\propto C_L f_0 = \\text{const.}$ | Unchanged ($\\times 1$) |\n| **Voltage Noise Variance ($\\overline{v_n^2}$)** | $\\propto kT/C_L$ | Halved ($\\times 0.5$) |\n| **Slew Rate ($dV/dt$)** | $\\propto I_D/C_L$ | Halved ($\\times 0.5$) |\n| **Cycle-to-Cycle Timing Jitter Variance ($\\sigma_{T_0}^2$)** | $\\propto C_L$ | Doubled ($\\times 2$, or $\\times \\sqrt{2}$ RMS) |\n| **Absolute Jitter over Fixed Time $\\tau$ ($\\sigma_t^2(\\tau)$)** | $\\text{Independent of } C_L$ | Unchanged ($\\times 1$) |\n| **Phase Noise $\\mathcal{L}(\\Delta \\omega)$ at Fixed Offset $\\Delta \\omega$** | $\\propto 1/C_L^2$ | **Decreases by $4\\times$ ($-6\\text{ dB}$)** |\n| **Frequency-Normalized Phase Noise (at fixed $\\Delta \\omega / \\omega_0$)** | $\\text{Independent of } C_L$ | **Unchanged ($0\\text{ dB}$)** |",
        "format": "markdown",
        "sha256": "cbd77de3f0691eba7e2ebb3be30b32aa3277cb74f5f55e67488f866e821b7598"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency, giving about a fourfold (6 dB) phase-noise reduction at a fixed offset, and that noise is unchanged at a fixed relative offset. This matches the golden solution’s full-credit rule.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 8373,
        "total_tokens": 9514,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6735,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 8373,
        "total_tokens": 9514,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6735,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit will fail to oscillate** if $C_L$ becomes sufficiently large. \n\n### 1. Intuitive Explanation\nBecause there is an odd number of inverters (three) in the loop, the circuit actually has **overall negative feedback at DC**. A standard three-stage ring oscillator only oscillates because its three closely spaced poles create enough high-frequency phase shift ($180^\\circ$) before the loop gain drops below unity, making the DC bias point unstable.\n\nAdding a very large capacitor $C_L$ to a single node acts as **dominant-pole frequency compensation** (just like compensating a multi-stage op-amp). Once $C_L$ is large enough to push the unity-gain frequency below the poles of the other two stages, the loop achieves a positive phase margin. Instead of oscillating, all three nodes will stably settle to the inverter trip voltage ($V_{\\text{inv}} \\approx V_{DD}/2$).\n\n---\n\n### 2. Mathematical Derivation (Barkhausen Criterion)\n\nAssume the three inverters are identical and linearized around their metastable bias point:\n* Small-signal voltage gain of each stage: $-A_0 = -g_m R_o$\n* Output resistance of each stage: $R_o$\n* Intrinsic parasitic capacitance at the two unloaded nodes: $C_0$\n* Total capacitance at the loaded node: $C_L$ (assuming $C_L \\gg C_0$)\n\nThis creates one dominant pole at $\\omega_L = \\frac{1}{R_o C_L}$ and two non-dominant poles at $\\omega_0 = \\frac{1}{R_o C_0}$. The open-loop transfer function is:\n\n$$L(s) = -\\frac{A_0^3}{\\left(1 + \\frac{s}{\\omega_L}\\right)\\left(1 + \\frac{s}{\\omega_0}\\right)^2}$$\n\n#### **Phase Condition**\nFor the circuit to oscillate, the three poles must contribute a total phase shift of $-180^\\circ$ at the oscillation frequency $\\omega_{\\text{osc}}$:\n\n$$\\tan^{-1}\\!\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_L}\\right) + 2\\tan^{-1}\\!\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) = 180^\\circ$$\n\nAs $C_L$ becomes very large ($\\omega_L \\ll \\omega_0$), the dominant pole contributes nearly $90^\\circ$ of phase shift:\n\n$$\\tan^{-1}\\!\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_L}\\right) \\approx 90^\\circ$$\n\nTherefore, the remaining two poles must contribute $45^\\circ$ each:\n\n$$2\\tan^{-1}\\!\\left(\\frac{\\omega_{\\text{osc}}}{\\omega_0}\\right) \\approx 90^\\circ \\implies \\omega_{\\text{osc}} \\approx \\omega_0$$\n\n#### **Magnitude Condition**\nAt $\\omega_{\\text{osc}} \\approx \\omega_0$, the magnitude of the loop gain must be at least $1$ to sustain oscillation:\n\n$$|L(j\\omega_0)| = \\frac{A_0^3}{\\sqrt{1 + \\left(\\frac{\\omega_0}{\\omega_L}\\right)^2} \\cdot \\left(\\sqrt{1 + 1^2}\\right)^2} \\ge 1$$\n\nSince $\\frac{\\omega_0}{\\omega_L} = \\frac{C_L}{C_0} \\gg 1$, this simplifies to:\n\n$$\\frac{A_0^3}{2\\left(\\frac{C_L}{C_0}\\right)} \\ge 1$$\n\nSolving for $C_L$ gives the maximum load capacitance before oscillation ceases:\n\n$$C_L \\le \\frac{A_0^3}{2} C_0$$\n\n### Conclusion\nIf **$C_L > \\frac{A_0^3}{2} C_0$**, the loop gain falls below unity before the phase shift reaches $180^\\circ$, and the ring oscillator **fails to oscillate**.",
        "format": "markdown",
        "sha256": "c7464b8616442e00c8ce169aa579b1958e49917dd97c2529869761d9213e41d4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that a capacitor on one node creates a dominant pole and, for sufficiently large CL, reduces loop gain below unity at the phase-crossover frequency. The approximate analysis supports the required conclusion; minor idealizations do not contradict it.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1140,
        "output_tokens": 4410,
        "total_tokens": 5550,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1140,
        "output_tokens": 4410,
        "total_tokens": 5550,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit fails to oscillate** if $C_L$ becomes sufficiently large. Instead of oscillating, all nodes will settle to a stable DC equilibrium voltage near the switching threshold of the inverters (typically around $V_{DD}/2$).\n\nHere is why this happens from both a frequency-domain and a time-domain perspective.\n\n---\n\n### 1. Why \"Digital Intuition\" Fails Here\nFrom a purely digital perspective, it is tempting to model each inverter with a propagation delay $t_{d}$ and write the oscillation period as:\n$$T_{\\text{osc}} = 2(t_{d1} + t_{d2} + t_{d3})$$\nUnder this flawed assumption, making $C_L \\to \\infty$ simply makes $t_{d1} \\to \\infty$, suggesting the circuit would still oscillate at an arbitrarily low frequency. \n\nHowever, a digital delay model is only valid when the signal transitions are fast enough that the stages switch dynamically through their thresholds. When $C_L$ is very large, the circuit enters its linear analog operating region around the inverter trip point $V_M$, where stability is governed by small-signal feedback theory.\n\n---\n\n### 2. Frequency-Domain Analysis (Dominant-Pole Compensation)\nAt the DC equilibrium point ($V_1 = V_2 = V_3 = V_M$), a three-stage ring oscillator is simply a **three-stage inverting amplifier connected in unity-gain negative feedback** (since three inversions yield a net negative DC loop gain of $-A_0^3$).\n\nLet each inverter be modeled around $V_M$ with a small-signal voltage gain $-A_0$ and output resistance $R$, and let the parasitic capacitance at the other two unburdened nodes be $C$. The loop transfer function is:\n\n$$L(s) = -\\frac{A_0^3}{(1 + s R C_L)(1 + s R C)^2}$$\n\nThis system has three poles:\n* One dominant pole at $\\omega_{p1} = \\frac{1}{R C_L}$\n* Two non-dominant poles at $\\omega_{p2,3} = \\frac{1}{R C}$\n\nAccording to the **Barkhausen / Nyquist stability criterion**, the circuit can only sustain oscillations if the loop gain magnitude $|L(j\\omega_{180})| \\ge 1$ at the phase-crossover frequency $\\omega_{180}$ where the three poles contribute $-180^\\circ$ of phase shift:\n\n$$\\arctan(\\omega_{180} R C_L) + 2\\arctan(\\omega_{180} R C) = 180^\\circ$$\n\nIf $C_L \\gg C$, the dominant pole $\\omega_{p1}$ already contributes nearly $90^\\circ$ of phase lag at high frequencies. Thus, the remaining two poles only need to contribute $45^\\circ$ each, which happens at:\n\n$$\\omega_{180} \\approx \\frac{1}{R C} = \\omega_{p2}$$\n\nEvaluating the magnitude of the loop gain at $\\omega_{180} \\approx \\frac{1}{RC}$ gives:\n\n$$|L(j\\omega_{180})| \\approx \\frac{A_0}{\\left(\\frac{C_L}{C}\\right)} \\cdot \\frac{A_0}{\\sqrt{2}} \\cdot \\frac{A_0}{\\sqrt{2}} = \\frac{A_0^3}{2}\\frac{C}{C_L}$$\n\nFor the circuit to oscillate, we need $|L(j\\omega_{180})| \\ge 1$. Therefore, **oscillation dies out when**:\n\n$$C_L > \\frac{A_0^3}{2} C$$\n\n*(Using the exact Routh-Hurwitz criterion, stability occurs when $2(1 + C_L/C)(1 + C/C_L) > A_0^3$.)*\n\nIn short, making $C_L$ arbitrarily large acts as **dominant-pole frequency compensation** on the three-stage negative-feedback amplifier, giving it a positive phase margin and pulling its closed-loop poles into the left-half plane.\n\n---\n\n### 3. Time-Domain Intuition\nTo oscillate, the voltage across $C_L$ must **overshoot** the switching threshold $V_M$. In a normal ring oscillator, this overshoot happens because the second and third stages have comparable delays—by the time the signal propagates through stages 2 and 3 to tell stage 1 to stop charging $C_L$, the voltage on $C_L$ has already blown past $V_M$.\n\nWhen $C_L$ is made huge:\n1. The voltage across $C_L$ changes extremely slowly.\n2. Relative to this slow change, the second and third inverters respond almost instantaneously (with negligible delay/phase lag), behaving like a fast, memoryless non-inverting amplifier of gain $+A_0^2$.\n3. Because there is no local positive-feedback loop (hysteresis/Schmitt trigger action) around stages 2 and 3, as $V_{C_L}$ slowly approaches $V_M$, stages 2 and 3 smoothly bring the input of stage 1 to $V_M$ at the exact same rate.\n4. Stage 1 smoothly reduces its charging current to zero right as $V_{C_L}$ reaches $V_M$, and the circuit comes to rest at DC equilibrium.",
        "format": "markdown",
        "sha256": "0221aa88f3deef557b1c9cb5aa1210d348239e0b0e530497f424a8d43bf4e7fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large, asymmetric CL can stop oscillation and explains the dominant-pole gain/phase roll-off and resulting stable DC equilibrium. Its phase-crossover estimate and Routh criterion are consistent with the stated model.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1140,
        "output_tokens": 4573,
        "total_tokens": 5713,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3372,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1140,
        "output_tokens": 4573,
        "total_tokens": 5713,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3372,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, the circuit **fails to oscillate** if $C_L$ becomes sufficiently large. Instead of oscillating, all three nodes will settle to a stable DC voltage equal to the switching threshold (trip point) of the inverters.\n\n---\n\n### 1. Intuitive Explanation: Digital vs. Analog Perspective\n\n* **Why Digital Intuition Fails:** \n  From a purely digital perspective, one might think that the oscillation period is simply $T = 2(t_{d1} + t_{d2} + t_{d3})$, so making $C_L$ arbitrarily large would just make the delay of the first stage ($t_{d1}$) arbitrarily long, resulting in a very slow oscillation. However, standard digital delay models assume crisp, fast input transitions. When $C_L$ is massive, the voltage across it changes extremely slowly. \n\n* **The Analog Reality (Dominant-Pole Compensation):** \n  As the voltage on $C_L$ slowly approaches the inverter switching threshold $V_M$ (where $V_{\\text{in}} = V_{\\text{out}}$), the inverters enter their high-gain linear region. At this point, the circuit is simply a **three-stage inverting amplifier connected in a unity-gain negative feedback loop**. \n  \n  In amplifier design, a three-stage feedback loop usually oscillates because its three poles can easily contribute $180^\\circ$ of phase shift while the loop gain is still greater than 1. How do analog designers stop a multi-stage amplifier from oscillating? By adding a large capacitor to one node to create a **dominant pole**! Making $C_L$ large performs **dominant-pole frequency compensation**, dropping the loop gain below unity before the phase shift reaches $180^\\circ$ and turning the oscillator into a stable unity-gain bias circuit.\n\n---\n\n### 2. Mathematical Proof (Barkhausen Criterion)\n\nAssume the three inverters are identical. Near their switching threshold $V_M$, each inverter can be modeled as a small-signal transconductance $g_m$ driving an output resistance $R_o$ and an intrinsic parasitic node capacitance $C_0$.\n\n* **DC gain per stage:** $A_0 = g_m R_o$\n* **Unloaded pole frequency (Stages 2 & 3):** $\\omega_0 = \\dfrac{1}{R_o C_0}$\n* **Loaded pole frequency (Stage 1 with $C_L$):** $\\omega_{p1} = \\dfrac{1}{R_o(C_0 + C_L)}$\n\nThe open-loop transfer function (loop gain) is:\n$$L(s) = -\\frac{A_0^3}{\\left(1 + \\frac{s}{\\omega_{p1}}\\right)\\left(1 + \\frac{s}{\\omega_0}\\right)^2}$$\n\n#### Step A: Find the $180^\\circ$ Phase-Crossover Frequency ($\\omega_{180}$)\nFor the three poles to contribute an additional $-180^\\circ$ of phase shift (to make the total loop phase $360^\\circ$):\n$$\\tan^{-1}\\!\\left(\\frac{\\omega_{180}}{\\omega_{p1}}\\right) + 2\\tan^{-1}\\!\\left(\\frac{\\omega_{180}}{\\omega_0}\\right) = 180^\\circ$$\n\nUsing the trigonometric identity $\\tan(\\alpha + 2\\beta) = 0$, this simplifies exactly to:\n$$\\omega_{180} = \\omega_0 \\sqrt{1 + \\frac{2\\omega_{p1}}{\\omega_0}}$$\n\n*(Note: When $C_L = 0$, $\\omega_{p1} = \\omega_0$ and we get the classic ring oscillator frequency $\\omega_{180} = \\sqrt{3}\\omega_0$. As $C_L \\to \\infty$, $\\omega_{p1} \\to 0$ and $\\omega_{180} \\to \\omega_0$, meaning the dominant pole contributes $90^\\circ$ and the two fast poles contribute $45^\\circ$ each.)*\n\n#### Step B: Find the Loop Gain Magnitude at $\\omega_{180}$\nEvaluating $|L(j\\omega_{180})|$ and substituting the expression for $\\omega_{180}$ above yields the exact closed-form magnitude:\n$$|L(j\\omega_{180})| = \\frac{A_0^3}{\\sqrt{1 + \\left(\\frac{\\omega_{180}}{\\omega_{p1}}\\right)^2} \\left[1 + \\left(\\frac{\\omega_{180}}{\\omega_0}\\right)^2\\right]} = \\frac{A_0^3}{2\\left(1 + \\frac{\\omega_0}{\\omega_{p1}}\\right)\\left(1 + \\frac{\\omega_{p1}}{\\omega_0}\\right)}$$\n\nFor $C_L \\gg C_0$, we have $\\omega_{p1} \\ll \\omega_0$ and $\\dfrac{\\omega_0}{\\omega_{p1}} = 1 + \\dfrac{C_L}{C_0} \\approx \\dfrac{C_L}{C_0}$, which simplifies the loop gain at the phase-crossover frequency to:\n$$|L(j\\omega_{180})| \\approx \\frac{A_0^3}{2\\left(1 + \\frac{C_L}{C_0}\\right)}$$\n\n---\n\n### Conclusion\n\nBy the Barkhausen stability criterion, the circuit **fails to oscillate** whenever $|L(j\\omega_{180})| < 1$, which occurs when:\n$$C_L \\gtrsim \\left(\\frac{A_0^3}{2} - 1\\right) C_0$$\n\nOnce $C_L$ exceeds this threshold, the phase margin of the three-stage loop becomes positive, and the circuit safely settles to its DC equilibrium point rather than oscillating.",
        "format": "markdown",
        "sha256": "744702a7c5809cc082fd3a8006345b5c7c74dd2fea0253741cf2e5422bee3ab3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the dominant pole created by a very large one-node capacitance, which rolls off loop gain and prevents sustained oscillation, with settling to a DC operating point as a valid outcome. The simplified model supports the essential conclusion; minor phase-margin terminology does not change it.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1140,
        "output_tokens": 5735,
        "total_tokens": 6875,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4427,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1140,
        "output_tokens": 5735,
        "total_tokens": 6875,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4427,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If we double the widths ($W$) of all the NMOS and PMOS transistors, the **phase noise decreases by a factor of 2 (an improvement of 3 dB)**, while the oscillation frequency remains unchanged and the power dissipation doubles.\n\nHere are two ways to understand why this happens:\n\n---\n\n### 1. Intuitive Explanation: Two Oscillators in Parallel\nDoubling the width of every transistor in the circuit is physically equivalent to taking **two identical ring oscillators** and connecting their corresponding nodes in parallel:\n* **Frequency & Voltage Swing:** Because both oscillators are identical and synchronized, the slew rate, stage delay, oscillation frequency ($f_0$), and rail-to-rail voltage swing ($V_{DD}$) remain unchanged.\n* **Noise Averaging:** While the deterministic oscillation signals add coherently (keeping the same voltage swing), the internal noise sources of the two parallel oscillators are **uncorrelated**. Shorting the nodes together averages the two uncorrelated noise voltages, reducing the total noise power spectral density by a factor of 2 (**3 dB**).\n\n---\n\n### 2. Analytical Explanation: Noise Current vs. Node Capacitance\nWe can also analyze how the circuit parameters scale with device width $W$ (assuming self-loading dominates over interconnect parasitics):\n\n1. **Oscillation Frequency ($f_0$) Remains Constant:**\n   * Doubling $W$ doubles the transistor drive current ($I_D \\propto W$) and transconductance ($g_m \\propto W$).\n   * It also doubles the parasitic capacitance at each node ($C \\propto W$).\n   * Because the delay of each stage is $t_d \\propto \\frac{C V_{DD}}{I_D}$, the factors of 2 cancel out, leaving the oscillation frequency $f_0 = \\frac{1}{6t_d}$ unchanged.\n\n2. **Noise Current Power ($\\overline{i_n^2}$) Doubles:**\n   * **Thermal noise:** $\\overline{i_{n,\\text{th}}^2} = 4kT\\gamma g_m \\propto W \\implies$ increases by $2\\times$.\n   * **Flicker ($1/f$) noise:** $\\overline{i_{n,1/f}^2} = \\frac{K}{C_{ox} W L} g_m^2 \\frac{1}{f} \\propto \\frac{W^2}{W} = W \\implies$ also increases by $2\\times$.\n\n3. **Maximum Charge Swing ($q_{\\text{max}}$) Doubles:**\n   * The maximum charge stored on each node is $q_{\\text{max}} = C V_{DD} \\propto W$, which increases by $2\\times$ (equivalently, the impedance at every node is halved).\n\n4. **Phase Noise ($\\mathcal{L}\\{\\Delta f\\}$) Halves:**\n   According to the Hajimiri-Lee phase noise model, phase noise is proportional to the ratio of the noise current power to the square of the charge swing:\n   $$\\mathcal{L}(\\Delta f) \\propto \\frac{\\overline{i_n^2}}{q_{\\text{max}}^2 \\Delta f^2} \\propto \\frac{W}{W^2} = \\frac{1}{W}$$\n\n   When $W \\rightarrow 2W$:\n   $$\\mathcal{L}_{\\text{new}}(\\Delta f) = \\frac{2}{(2)^2} \\mathcal{L}_{\\text{old}}(\\Delta f) = \\frac{1}{2} \\mathcal{L}_{\\text{old}}(\\Delta f) \\quad (\\text{or } -3\\text{ dB})$$\n\n---\n\n### Summary of Trade-offs\n| Parameter | Scaling with $W \\rightarrow 2W$ | Effect |\n| :--- | :---: | :--- |\n| **Oscillation Frequency ($f_0$)** | $\\propto 1$ | Unchanged |\n| **Power Consumption ($P = 3 C V_{DD}^2 f_0$)** | $\\propto W$ | Doubles ($+3\\text{ dB}$) |\n| **Phase Noise ($\\mathcal{L}(\\Delta f)$)** | $\\propto 1/W$ | Halves ($-3\\text{ dB}$) |\n| **Figure of Merit ($\\text{FoM}$)** | $\\mathcal{L}(\\Delta f) \\cdot P$ | Unchanged |",
        "format": "markdown",
        "sha256": "91ebbe79a70e25e963f7d99dd0f149e0038ad56bc4b02288852466e552e931f9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB (factor-of-two) phase-noise reduction and supports it with valid parallel-ring and width-scaling explanations; the stated current-noise increase, unchanged frequency, and doubled power are consistent with the golden solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 2568,
        "total_tokens": 3716,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1629,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 2568,
        "total_tokens": 3716,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1629,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If we double the widths ($W$) of both the NMOS and PMOS devices, the phase noise power spectral density is **cut in half**, which means the phase noise **improves (decreases) by 3 dB**, while the oscillation frequency remains unchanged. \n\nHere is a step-by-step breakdown of why this happens:\n\n### 1. Oscillation Frequency Remains Constant\nDoubling the widths of all transistors is equivalent to placing two identical ring oscillators in parallel and shorting their corresponding nodes together:\n* **Drive current ($I_D$):** Doubles ($I_D \\propto W$).\n* **Node capacitance ($C$):** Doubles ($C \\propto W$, neglecting interconnect parasitics).\n* **Delay per stage ($T_D$):** Since $T_D \\propto \\frac{C V_{DD}}{I_D}$, the factors of 2 cancel out, leaving the oscillation frequency ($f_0$) and the rail-to-rail voltage swing ($V_{DD}$) completely **unchanged**.\n\n---\n\n### 2. Thermal Phase Noise ($1/f^2$ Region) Improves by 3 dB\n* **Noise Current:** The thermal noise current power spectral density (PSD) of the transistors is proportional to their transconductance ($\\overline{i_n^2} = 4kT\\gamma g_m$). Since $g_m \\propto W$, doubling the width **doubles** the noise current PSD:\n  $$\\overline{i_{n,\\text{new}}^2} = 2\\overline{i_n^2}$$\n* **Node Impedance:** Because both the capacitance $C$ and transconductance $g_m$ at each node are doubled, the impedance $Z$ at every node is **halved**:\n  $$Z_{\\text{new}} = \\frac{1}{2}Z$$\n* **Noise Voltage & Phase:** The resulting noise voltage PSD at each node is:\n  $$\\overline{v_{n,\\text{new}}^2} = \\overline{i_{n,\\text{new}}^2} \\cdot |Z_{\\text{new}}|^2 = (2\\overline{i_n^2}) \\cdot \\left(\\frac{1}{2}|Z|\\right)^2 = \\frac{1}{2}\\overline{v_n^2}$$\n\nAlternatively, from a charge perspective, injecting a noise current into a doubled capacitance ($2C$) produces half the phase perturbation variance ($\\overline{\\phi_n^2} \\propto \\frac{kT}{C V_{DD}^2}$). Because the carrier signal swing ($V_{DD}$) is unchanged, the phase noise $\\mathcal{L}(\\Delta f)$ is **halved (-3 dB)**.\n\n---\n\n### 3. Flicker Phase Noise ($1/f^3$ Region) Also Improves by 3 dB\nThe gate-referred flicker ($1/f$) noise PSD of a MOSFET is inversely proportional to its gate area:\n$$\\overline{v_{n,1/f}^2} = \\frac{K}{W L C_{ox} f}$$\nDoubling $W$ directly halves the flicker noise power, so the close-in $1/f^3$ phase noise also improves by **3 dB**.\n\n---\n\n### 4. The Trade-Off: Power Consumption\nThe standard phase noise equation for a CMOS ring oscillator shows that phase noise is inversely proportional to power dissipation ($P$):\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{kT}{P}\\left(\\frac{f_0}{\\Delta f}\\right)^2$$\nBecause the total capacitance $C$ doubles while $f_0$ stays constant, the dynamic power consumption ($P = 3 C V_{DD}^2 f_0$) **doubles**. Thus, you gain a **3 dB improvement in phase noise** at the direct expense of **doubling the power dissipation** (leaving the oscillator's Figure of Merit unchanged).",
        "format": "markdown",
        "sha256": "f38b905a8b135459ff067b4d7a169b697e5427cfe65d8a72567e46ca100683c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives about a 3 dB phase-noise reduction and explains the scaling: width doubles current, capacitance, and noise-current PSD, while the node impedance halves. It also correctly notes that frequency stays about the same and power doubles.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 2585,
        "total_tokens": 3733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1740,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 2585,
        "total_tokens": 3733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1740,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If we double the widths ($W$) of all the NMOS and PMOS devices in this three-stage CMOS ring oscillator, the **phase noise decreases by a factor of 2 (i.e., improves by 3 dB)**. \n\nAt the same time, the **oscillation frequency remains unchanged** (assuming parasitic wiring capacitance is negligible) and the **power dissipation doubles**.\n\nHere are two ways to understand why this happens:\n\n---\n\n### 1. Intuitive Explanation: Two Coupled Oscillators in Parallel\nDoubling the widths of all transistors is electrically equivalent to placing **two identical ring oscillators in parallel** and shorting their corresponding outputs together:\n\n1. **Frequency and Swing:** Because both the charging/discharging currents ($I_D$) and the node capacitances ($C$) double, the slew rate ($I_D/C$) and stage delay remain identical. Therefore, the oscillation frequency $f_0$ and the rail-to-rail voltage swing ($V_{DD}$) do not change.\n2. **Noise Reduction:** At each node, the uncorrelated noise currents from the two parallel stages add in power, so the total noise current spectral density doubles:\n   $$\\overline{i_{n,\\text{total}}^2} = 2\\overline{i_n^2}$$\n3. **Impedance Scaling:** However, the impedance seen at each node is cut in half because the capacitance is doubled ($Z \\propto \\frac{1}{C}$). \n4. **Resulting Phase Noise:** Converting the noise current into voltage (or phase) fluctuations across the halved impedance yields:\n   $$\\overline{v_{n,\\text{total}}^2} = \\overline{i_{n,\\text{total}}^2} \\cdot |Z_{\\text{total}}|^2 = (2\\overline{i_n^2}) \\cdot \\left(\\frac{1}{2}|Z|\\right)^2 = \\frac{1}{2}\\overline{v_n^2}$$\n\nSince the carrier signal power ($V_{DD}^2$) is unchanged and the noise power is halved, the phase noise drops by **3 dB**.\n\n---\n\n### 2. Analytical Explanation (Thermal and Flicker Noise)\n\n* **Thermal Noise ($1/f^2$ region):**\n  According to phase noise theory (such as the Hajimiri-Lee Impulse Sensitivity Function model), the phase noise at an offset $\\Delta \\omega$ is proportional to:\n  $$\\mathcal{L}(\\Delta \\omega) \\propto \\frac{\\overline{i_n^2}/\\Delta f}{q_{\\text{max}}^2 \\, \\Delta\\omega^2}$$\n  * The transistor thermal noise current power scales linearly with width: $\\overline{i_n^2}/\\Delta f = 4kT\\gamma g_m \\propto W$.\n  * The maximum charge swing at each node also scales linearly with width: $q_{\\text{max}} = C_{\\text{node}} V_{DD} \\propto W$.\n  \n  Substituting these relationships gives:\n  $$\\mathcal{L}(\\Delta \\omega) \\propto \\frac{W}{W^2} = \\frac{1}{W}$$\n  Doubling $W$ cuts $\\mathcal{L}(\\Delta \\omega)$ in half (**$-3\\text{ dB}$**).\n\n* **Flicker Noise ($1/f^3$ region):**\n  The gate-referred $1/f$ noise spectral density of a MOSFET is inversely proportional to its gate area ($W \\times L$):\n  $$\\overline{v_{n,1/f}^2} = \\frac{K}{W L C_{\\text{ox}} f} \\propto \\frac{1}{W}$$\n  Doubling $W$ directly halves the flicker noise power, meaning the close-in $1/f^3$ phase noise also improves by **3 dB**.\n\n---\n\n### Summary of Trade-offs\n| Parameter | Effect of Doubling $W$ |\n| :--- | :--- |\n| **Oscillation Frequency ($f_0$)** | Unchanged ($1\\times$) |\n| **Power Consumption ($P$)** | Doubled ($2\\times$ or $+3\\text{ dB}$) |\n| **Phase Noise ($\\mathcal{L}(\\Delta \\omega)$)** | Halved ($0.5\\times$ or $-3\\text{ dB}$) |\n| **Figure of Merit ($\\text{FoM}$)** | Unchanged |",
        "format": "markdown",
        "sha256": "1c945ac3f7731e3956ba63d4d2cc612bcde67d934bd681d11696d11f9aae981e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and supports it with valid width, noise, and node-capacitance scaling. This matches the golden solution’s full-credit rule.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 2555,
        "total_tokens": 3703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1600,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1148,
        "output_tokens": 2555,
        "total_tokens": 3703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1600,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ seen looking into the supply node of the three-stage CMOS ring oscillator, we can use a **symmetry argument** around the bias point where all three stages are active:\n\n### 1. Symmetry Argument\nSuppose we apply a small-signal voltage change $v_x$ to the shared supply node. Because the three CMOS inverter stages are completely identical and arranged in a symmetric loop, the perturbation $v_x$ affects each stage equally. \n\nConsequently, the resulting small-signal voltages at the output nodes of all three inverters must be identical:\n$$v_{out1} = v_{out2} = v_{out3} = v$$\n\n### 2. Equivalent Circuit of a Single Stage\nSince the input of each inverter is connected to the output of the preceding inverter, having equal small-signal voltages at all three nodes ($v_{in} = v_{out} = v$) means that **no small-signal current flows between the stages**, and we can conceptually short the input of each inverter to its own output.\n\nWhen the input (gates) and output (drains) of a CMOS inverter are tied together:\n* **The NMOS transistor** has its gate tied to its drain and its source tied to ground. It behaves as a **diode-connected transistor** to ground with a small-signal resistance of:\n  $$R_N = \\frac{1}{g_{mN}} \\parallel r_{oN}$$\n* **The PMOS transistor** also has its gate tied to its drain, placed in series between the supply node ($v_x$) and the output node ($v$). Looking into its source from the supply terminal, it behaves as a **diode-connected transistor** with a small-signal resistance of:\n  $$R_P = \\frac{1}{g_{mP}} \\parallel r_{oP}$$\n\nSince the PMOS and NMOS devices are in series between the supply node and ground, the small-signal resistance seen looking into the supply terminal of a **single inverter stage** is simply the sum of these two resistances:\n$$R_{\\text{stage}} = R_P + R_N = \\left(\\frac{1}{g_{mP}} \\parallel r_{oP}\\right) + \\left(\\frac{1}{g_{mN}} \\parallel r_{oN}\\right)$$\n\n---\n\n### 3. Total Small-Signal Resistance ($R_X$)\nBecause all three identical stages are connected in parallel to the supply node, the total resistance $R_X$ is one-third of the single-stage resistance:\n\n* **Neglecting channel-length modulation ($r_{oN}, r_{oP} \\to \\infty$):**\n  $$R_X = \\frac{1}{3}\\left(\\frac{1}{g_{mN}} + \\frac{1}{g_{mP}}\\right)$$\n\n* **Including channel-length modulation (finite $r_o$):**\n  $$R_X = \\frac{1}{3}\\left[ \\left(\\frac{1}{g_{mN}} \\parallel r_{oN}\\right) + \\left(\\frac{1}{g_{mP}} \\parallel r_{oP}\\right) \\right]$$",
        "format": "markdown",
        "sha256": "03195dcd1bf728b761de075f06dbe27c278312e33e56c06d773103158233a173"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance from symmetry and diode-connected inverter intuition, but misses the dominant oscillation-driven charging and discharging of the load capacitances. The golden solution explicitly assigns this static-only derivation a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1145,
        "output_tokens": 2641,
        "total_tokens": 3786,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1937,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1145,
        "output_tokens": 2641,
        "total_tokens": 3786,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1937,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the small-signal resistance $R_X$ looking into the supply node of the three-stage CMOS ring oscillator, we analyze the circuit around its DC equilibrium point.\n\n---\n\n### 1. Exploiting Symmetry\nLet the three identical CMOS inverter stages have output nodes with small-signal voltages $v_1$, $v_2$, and $v_3$. When a small-signal test voltage $v_x$ is applied to the common supply rail:\n\n* Every stage is identical and experiences the same supply perturbation $v_x$.\n* Due to the cyclic symmetry of the loop, all three internal nodes must experience the exact same small-signal voltage change:\n  $$v_1 = v_2 = v_3 = v_y$$\n\nBecause the input and output of each inverter are at the same small-signal potential ($v_{in,i} = v_{out,i} = v_y$), each stage behaves independently as an inverter with its **input tied to its output**.\n\n---\n\n### 2. Single-Stage Equivalent Resistance\nIn a standard CMOS inverter consisting of an NMOS transistor ($M_N$) and a PMOS transistor ($M_P$), tying the input (gates) to the output (drains) at node $v_y$ causes **both transistors to become diode-connected**:\n\n1. **PMOS ($M_P$):** The source is connected to $v_x$, while both the gate and drain are at $v_y$. The small-signal resistance between $v_x$ and $v_y$ is:\n   $$R_P = \\frac{1}{g_{mP}} \\parallel r_{oP}$$\n\n2. **NMOS ($M_N$):** The source is connected to ground, while both the gate and drain are at $v_y$. The small-signal resistance from $v_y$ to ground is:\n   $$R_N = \\frac{1}{g_{mN}} \\parallel r_{oN}$$\n\nSince no small-signal current flows into the gates of the subsequent stage, $M_P$ and $M_N$ are simply in series. Thus, the resistance looking into the supply pin of a single stage is:\n$$R_{X1} = R_P + R_N = \\left(\\frac{1}{g_{mP}} \\parallel r_{oP}\\right) + \\left(\\frac{1}{g_{mN}} \\parallel r_{oN}\\right)$$\n\n---\n\n### 3. Total Supply Resistance ($R_X$)\nBecause the supply terminals of all three identical stages are connected in parallel at the $v_x$ node, the total small-signal resistance is one-third that of a single stage:\n\n$$R_X = \\frac{1}{3} \\left[ \\left(\\frac{1}{g_{mP}} \\parallel r_{oP}\\right) + \\left(\\frac{1}{g_{mN}} \\parallel r_{oN}\\right) \\right]$$\n\nAssuming $g_m r_o \\gg 1$ (neglecting channel-length modulation), this simplifies to:\n\n$$\\mathbf{R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mN}} + \\frac{1}{g_{mP}}\\right)}$$\n\n*(Note: For an $N$-stage ring oscillator, this result generalizes to $R_X \\approx \\frac{1}{N}\\left(\\frac{1}{g_{mN}} + \\frac{1}{g_{mP}}\\right)$.)*",
        "format": "markdown",
        "sha256": "644fcaaab49d64eb5687d25c03067894a3164ba5e721f90450903ced7ea676e3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static, gm-based resistance from a diode-connected inverter model and ignores the dominant oscillation-driven charging and discharging of the node capacitances. The golden solution explicitly assigns this internally consistent static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1145,
        "output_tokens": 2897,
        "total_tokens": 4042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2117,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1145,
        "output_tokens": 2897,
        "total_tokens": 4042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2117,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the small-signal resistance $R_X$ seen looking into the supply node, assume the three CMOS inverter stages are identical and composed of NMOS and PMOS transistors ($M_N$ and $M_P$).\n\n---\n\n### **1. Symmetry Argument (Intuitive Approach)**\n\n1. **Apply a test voltage:** Suppose we apply a small-signal test voltage $v_X$ to the common supply node.\n2. **Exploit cyclic symmetry:** Because the three inverter stages are identical and experience the exact same supply perturbation $v_X$, all three internal nodes (the inputs and outputs of the inverters) must undergo the exact same small-signal voltage change, $v_Y$:\n   $$v_{out1} = v_{out2} = v_{out3} = v_Y$$\n3. **Equivalent circuit per stage:** Since the input (gate) and output (drain) of each inverter are at the same small-signal potential ($v_{in} = v_{out} = v_Y$), each inverter effectively has its input shorted to its output. Consequently, within each stage:\n   * The **PMOS transistor** has its gate and drain tied together at $v_Y$ and its source at $v_X$, acting as a diode-connected device with small-signal resistance:\n     $$R_P = \\frac{1}{g_{mP}} \\parallel r_{oP} \\approx \\frac{1}{g_{mP}}$$\n   * The **NMOS transistor** has its gate and drain tied together at $v_Y$ and its source connected to ground, also acting as a diode-connected device with small-signal resistance:\n     $$R_N = \\frac{1}{g_{mN}} \\parallel r_{oN} \\approx \\frac{1}{g_{mN}}$$\n\n4. **Combine the three stages:** In each stage, $R_P$ and $R_N$ appear in series between the supply node and ground. Since all three stages are connected in parallel to the supply node, the total resistance $R_X$ is one-third that of a single stage:\n\n$$R_X = \\frac{1}{3}\\left[ \\left(\\frac{1}{g_{mP}} \\parallel r_{oP}\\right) + \\left(\\frac{1}{g_{mN}} \\parallel r_{oN}\\right) \\right]$$\n\nNeglecting channel-length modulation ($r_{oN}, r_{oP} \\to \\infty$), this simplifies to:\n\n$$\\mathbf{R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mN}} + \\frac{1}{g_{mP}}\\right)}$$\n\n---\n\n### **2. Algebraic Verification (KCL)**\n\nNeglecting channel-length modulation, let $v_Y$ be the common small-signal voltage at the output of each inverter when $v_X$ is applied to the supply:\n\n1. For each PMOS transistor, the source-to-gate voltage is $v_{sgP} = v_X - v_Y$, producing a drain current of:\n   $$i_{dP} = g_{mP}(v_X - v_Y)$$\n\n2. For each NMOS transistor, the gate-to-source voltage is $v_{gsN} = v_Y$, producing a drain current of:\n   $$i_{dN} = g_{mN}v_Y$$\n\n3. By Kirchhoff's Current Law (KCL) at the output node of each inverter ($i_{dP} = i_{dN}$):\n   $$g_{mP}(v_X - v_Y) = g_{mN}v_Y \\implies v_Y = \\frac{g_{mP}}{g_{mN} + g_{mP}}v_X$$\n\n4. The total current $i_X$ drawn from the supply node by all three stages is:\n   $$i_X = 3i_{dP} = 3g_{mP}(v_X - v_Y) = 3\\left(\\frac{g_{mN}g_{mP}}{g_{mN} + g_{mP}}\\right)v_X$$\n\n5. Dividing $v_X$ by $i_X$ gives the small-signal input resistance:\n   $$R_X = \\frac{v_X}{i_X} = \\frac{1}{3}\\left(\\frac{1}{g_{mN}} + \\frac{1}{g_{mP}}\\right)$$",
        "format": "markdown",
        "sha256": "bf1d8b67d3bc6a88304f352aa10bfafba0657d67653b6acf3460c047fd572e43"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance from a diode-connected-inverter symmetry argument and ignores the oscillation-driven charging and discharging of the load capacitances, which sets the resistance in the golden solution.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1145,
        "output_tokens": 3581,
        "total_tokens": 4726,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1145,
        "output_tokens": 3581,
        "total_tokens": 4726,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes significantly.** When the circuit oscillates, the effective resistance $R_X$ seen looking into the supply node is substantially **larger** (roughly by a factor of 2 to 3) than the static estimate.\n\nHere is why the static approximation fails during oscillation and how to analyze the oscillating case:\n\n---\n\n### 1. Why the Original Formula Only Holds at DC Equilibrium (Non-Oscillating)\nThe expression \n$$R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$$\nassumes the ring oscillator is stuck at its **metastable DC operating point**, where all three internal nodes sit at the same inverter trip voltage ($V_1 = V_2 = V_3 = V_M \\approx V_{DD}/2$) and all six transistors operate in saturation. \n\nUnder that condition, a small perturbation $\\Delta V_{DD}$ on the supply affects all three identical stages symmetrically, causing all three node voltages to change by the exact same small-signal amount ($\\Delta V_1 = \\Delta V_2 = \\Delta V_3$). Because $\\Delta V_{\\text{in}} = \\Delta V_{\\text{out}}$ for every stage, each inverter acts as if its input and output are shorted together—behaving as a diode-connected PMOS in series with a diode-connected NMOS ($1/g_{mp} + 1/g_{mn}$)—with all three stages conducting in parallel.\n\n---\n\n### 2. What Changes When the Circuit Oscillates?\n\n#### A. Instantaneous / Transistor-State View\nDuring oscillation, the three internal nodes swing between $\\text{GND}$ and $V_{DD}$ with a $120^\\circ$ phase difference, so the symmetry argument breaks down:\n* **Stages are not simultaneously active:** At any given instant, **at most one inverter is in the middle of a transition** (near the trip point where both NMOS and PMOS conduct). \n* **The other two stages have transistors in cutoff/triode:** For the other two inverters, the inputs are near $\\text{GND}$ or $V_{DD}$:\n  * If $V_{\\text{in}} \\approx V_{DD}$, the PMOS is **OFF** ($g_{mp} = 0$), disconnecting that stage from $V_{DD}$.\n  * If $V_{\\text{in}} \\approx 0$, the NMOS is **OFF** ($g_{mn} = 0$) and the PMOS is in deep triode, so there is no DC path to ground through that stage (current only flows briefly while charging the output load capacitance).\n* **Inputs and outputs move in opposite directions:** Even for the single stage undergoing a transition, its input and output are slewing in opposite directions rather than tracking each other, so it does not behave as two diode-connected devices in series.\n\nBecause only one stage pulls current from $V_{DD}$ at any given time, the factor of $\\frac{1}{3}$ from having three stages conducting in parallel disappears.\n\n---\n\n#### B. Average Supply Current View ($\\partial I_{DD} / \\partial V_{DD}$)\nFor circuits driving the supply node (such as an LDO regulator or supply-modulated VCO control loop operating at frequencies well below $f_{\\text{osc}}$), $R_X$ is determined by how the average supply current $\\overline{I_{DD}}$ varies with $V_{DD}$:\n\n1. **Dynamic Supply Current:** Each of the $N = 3$ stages charges its load capacitance $C$ to $V_{DD}$ once per period $T_{\\text{osc}} = 1/f_{\\text{osc}}$, drawing an average current of:\n   $$\\overline{I_{DD}} = 3 C V_{DD} f_{\\text{osc}}$$\n\n2. **Oscillation Frequency vs. Supply Current:** With a per-stage delay of $T_D \\approx \\frac{C (V_{DD}/2)}{I_D}$ (where $I_D$ is the charging current of a single stage), the oscillation frequency is:\n   $$f_{\\text{osc}} = \\frac{1}{2 N T_D} = \\frac{1}{6 T_D} \\approx \\frac{I_D}{3 C V_{DD}}$$\n\n3. **Resulting Supply Resistance:** Substituting $f_{\\text{osc}}$ back into $\\overline{I_{DD}}$, the number of stages ($N = 3$) cancels out:\n   $$\\overline{I_{DD}} \\approx 3 C V_{DD} \\left(\\frac{I_D}{3 C V_{DD}}\\right) = I_D$$\n   Differentiating with respect to $V_{DD}$ gives the effective small-signal conductance:\n   $$\\frac{1}{R_X} = \\frac{\\partial \\overline{I_{DD}}}{\\partial V_{DD}} \\approx \\frac{\\partial I_D}{\\partial V_{DD}} \\approx g_m \\implies R_X \\approx \\frac{1}{g_m} \\quad \\left(\\text{or } \\sim \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$$\n\n### Summary\nWhen the ring oscillator oscillates, **only one stage charges from the supply at a time** rather than all three stages conducting simultaneously in saturation. As a result, the factor of $1/3$ vanishes and $R_X$ increases by roughly a factor of $3$.",
        "format": "markdown",
        "sha256": "153240d326036771a1c786e79cc95e4a554b6532845361ef2d529198457993aa"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive charging and derives the dynamic supply-current/frequency relation, giving an inverse-gm scale. However, it concludes that RX is significantly higher because only one stage conducts at a time; the expected result is that RX remains comparable in order to the static estimate. Thus it captures the mechanism but misses the central magnitude conclusion.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2454,
        "output_tokens": 12460,
        "total_tokens": 14914,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1227,
        "output_tokens": 6230,
        "total_tokens": 7457,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5030,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes significantly when the circuit oscillates.** In fact, the actual resistance looking into the supply port during oscillation is roughly **three times larger** (and, more generally, independent of the number of stages $N$).\n\n---\n\n### 1. Why the Original Formula Only Holds When *Not* Oscillating\nThe expression \n$$R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$$\nis valid only at the **metastable DC operating point**, where the circuit is not oscillating and all three internal nodes sit at the inverter trip point ($V_1 = V_2 = V_3 \\approx V_{DD}/2$). \n\nAt that unstable equilibrium:\n* By symmetry, a small perturbation $\\Delta V_{DD}$ on the supply rail produces the **exact same** common-mode voltage change ($\\Delta V_1 = \\Delta V_2 = \\Delta V_3$) at every node.\n* Because each inverter sees equal small-signal changes at its input and output ($\\Delta V_{\\text{in}} = \\Delta V_{\\text{out}}$), its gate and drain are AC-shorted, making each inverter behave like a diode-connected PMOS in series with a diode-connected NMOS: $R_{\\text{stage}} \\approx \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}$.\n* Since all three stages conduct static crowbar current simultaneously in parallel, their resistances divide by $3$.\n\n*(Note: This is a classic pitfall in SPICE—running a standard `.AC` or `.TF` analysis on a ring oscillator evaluates the circuit at this metastable DC point and reports this exact misleading impedance.)*\n\n---\n\n### 2. What Changes When the Circuit Oscillates?\n\nWhen the ring oscillator experiences large-signal oscillation, two fundamental assumptions break down:\n\n#### A. The stages no longer conduct in parallel (the $1/3$ factor disappears)\nDuring oscillation, the three internal nodes are $120^\\circ$ out of phase and swing nearly rail-to-rail. The stages switch **sequentially** rather than simultaneously. At a typical instant—say, when Node 1 is crossing $V_{DD}/2$ (rising), Node 2 is near $V_{DD}$, and Node 3 is near $0\\text{ V}$:\n1. **Inverter 1 ($V_{\\text{in}} \\approx 0, V_{\\text{out}} \\approx V_{DD}/2$):** The NMOS is **OFF**, and the PMOS is in saturation charging the load capacitance $C_L$.\n2. **Inverter 2 ($V_{\\text{in}} \\approx V_{DD}/2, V_{\\text{out}} \\approx V_{DD}$):** Both devices conduct briefly as the output begins to transition.\n3. **Inverter 3 ($V_{\\text{in}} \\approx V_{DD}, V_{\\text{out}} \\approx 0$):** The PMOS is **OFF**, and the NMOS is in deep triode holding the output at ground. This stage draws **zero** current from $V_{DD}$.\n\nBecause the stages are not all sitting at $V_{DD}/2$ with $\\Delta V_{\\text{in}} = \\Delta V_{\\text{out}}$, they no longer act like three diode-connected branches in parallel.\n\n#### B. Cycle-Averaged Supply Resistance (Dynamic Current Perspective)\nIn practical applications (such as a supply-regulated ring VCO where $V_{DD}$ is driven by an LDO to tune the oscillation frequency), we care about the incremental supply resistance $R_X = \\left(\\frac{\\partial I_{DD,\\text{avg}}}{\\partial V_{DD}}\\right)^{-1}$ for supply variations slower than the oscillation frequency $f_{\\text{osc}}$.\n\nOver one oscillation period $T = 2 N t_d$ (with $N = 3$), each of the $N$ load capacitors $C_L$ is charged from $0$ to $V_{DD}$ once. The average dynamic supply current is:\n$$I_{DD,\\text{avg}} = N \\cdot C_L \\cdot V_{DD} \\cdot f_{\\text{osc}} = N \\cdot C_L \\cdot V_{DD} \\cdot \\left(\\frac{1}{2 N t_d}\\right) = \\frac{C_L V_{DD}}{2 t_d}$$\n\nNotice that **the number of stages $N = 3$ cancels out**:\n* Only **one** edge propagates through the ring at any given time, meaning only one stage is actively charging or discharging its load capacitance at a time.\n* Since the propagation delay is inversely proportional to the transistor drive current, $t_d \\propto C_L V_{DD} \\left(\\frac{1}{I_{Dn}} + \\frac{1}{I_{Dp}}\\right)$, substituting $t_d$ into $I_{DD,\\text{avg}}$ gives an average supply current on the order of the charging current of a **single stage**:\n  $$I_{DD,\\text{avg}} \\propto \\frac{1}{\\frac{1}{I_{Dn}} + \\frac{1}{I_{Dp}}}$$\n* Differentiating with respect to $V_{DD}$ gives an effective incremental supply resistance:\n  $$R_{X,\\text{osc}} = \\left(\\frac{\\partial I_{DD,\\text{avg}}}{\\partial V_{DD}}\\right)^{-1} \\propto \\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$$\n\n---\n\n### Summary\nWhen the circuit oscillates, **the factor of $1/3$ vanishes** because the inverters switch one at a time rather than conducting simultaneously in parallel. As a result, the effective small-signal supply resistance $R_X$ is roughly **three times higher** (and independent of the number of stages in the ring) than the non-oscillating diode-connected approximation predicts.",
        "format": "markdown",
        "sha256": "ba4457c556555094cfdb0a265e1371a4dac8226762e07a69fa554e54e140e7a8"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly bases the oscillating supply current on charging the node capacitances each cycle and uses the delay scaling to place the resistance on the inverse-transconductance/on-resistance scale. The stated factor of about three is an order-one comparison with the approximate static result, not a large increase caused by devices being off.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2454,
        "output_tokens": 22030,
        "total_tokens": 24484,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19426,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1227,
        "output_tokens": 11015,
        "total_tokens": 12242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9713,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes**—both in terms of the physical mechanism and the numerical value of $R_X$.\n\n---\n\n### 1. Why the Original Formula Only Applies When *Not* Oscillating\nThe expression\n$$R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)$$\nassumes the ring oscillator is sitting statically at its **DC metastable equilibrium (trip point)**, where all three internal nodes are at the exact same voltage ($V_1 = V_2 = V_3 = V_M$). \n\nUnder that static condition:\n* A small perturbation $\\Delta V_{DD}$ on the supply causes all three internal nodes to move together by the same amount ($\\Delta V_{in} = \\Delta V_{out}$ for every stage) due to symmetry.\n* With its input and output moving identically, each inverter acts as a diode-connected PMOS ($1/g_{mp}$) in series with a diode-connected NMOS ($1/g_{mn}$).\n* Because all three inverters are biased in saturation simultaneously in parallel, the resistance is divided by $3$.\n\n---\n\n### 2. What Changes When the Circuit Oscillates?\n\n#### A. Instantaneous (Time-Domain) View: Broken Symmetry and Cutoff Devices\nWhen the circuit oscillates with a large (rail-to-rail) swing, the three stages are $120^\\circ$ out of phase and are no longer at the same operating point at any given instant:\n\n1. **Stage with $V_{in} \\approx V_{DD},\\, V_{out} \\approx 0$:** The PMOS device is **OFF** ($g_{mp} = 0$) and the NMOS is in deep triode. This stage draws no current from $V_{DD}$ and looks like an open circuit at the supply terminal.\n2. **Stage with $V_{in} \\approx 0,\\, V_{out} \\approx V_{DD}$:** The NMOS device is **OFF** ($g_{mn} = 0$) and the PMOS is in the **triode (linear) region** with a channel resistance $R_{on,p}$, connecting $V_{DD}$ to the load capacitance of the following stage.\n3. **Stage in Transition ($V_{in} \\approx V_M$):** Only **one** stage at a time is actively transitioning through the middle region where both transistors are in saturation—and even for this stage, $\\Delta V_{in} \\neq \\Delta V_{out}$ because the input and output move in opposite directions.\n\nAs a result:\n* The instantaneous supply resistance $R_X(t)$ is actually **time-varying** (periodic at $3f_{osc}$, since three identical transitions occur per cycle).\n* Because all three stages are no longer conducting simultaneously from $V_{DD}$ to ground, the resistance seen looking into the supply is **significantly larger** than the static metastable estimate.\n\n---\n\n#### B. Cycle-Averaged (Low-Frequency) View: Dynamic Switching Current\nIn most practical applications (such as designing a voltage regulator or LDO to power a ring VCO), we care about the **average** low-frequency incremental resistance:\n$$R_{X,\\text{avg}} = \\left(\\frac{\\partial I_{DD,\\text{avg}}}{\\partial V_{DD}}\\right)^{-1}$$\n\nWhen oscillating, the supply current is dominated by the **dynamic current** required to charge the load capacitance $C_L$ of each of the 3 stages once per period $T_{osc} = 1/f_{osc}$:\n$$I_{DD,\\text{avg}} \\approx 3 C_L V_{DD} f_{osc}$$\n\nIf the supply voltage changes slowly (at frequencies $\\ll f_{osc}$), both the voltage swing $V_{DD}$ and the oscillation frequency $f_{osc}(V_{DD})$ change. Differentiating with respect to $V_{DD}$ gives:\n$$\\frac{1}{R_{X,\\text{avg}}} = \\frac{\\partial I_{DD,\\text{avg}}}{\\partial V_{DD}} = 3 C_L \\left( f_{osc} + V_{DD} \\frac{\\partial f_{osc}}{\\partial V_{DD}} \\right)$$\n\n**How does this compare to $1/g_m$?**\n* Since the propagation delay of each inverter is $t_d \\propto \\frac{C_L V_{DD}}{I_{D,\\text{sat}}}$, the oscillation frequency is:\n  $$f_{osc} = \\frac{1}{6 t_d} \\propto \\frac{I_{D,\\text{sat}}}{3 C_L V_{DD}}$$\n* Substituting $f_{osc}$ back into the current equation cancels $3 C_L V_{DD}$:\n  $$I_{DD,\\text{avg}} \\propto I_{D,\\text{sat}}$$\n* Differentiating with respect to $V_{DD}$ yields $\\frac{\\partial I_{DD,\\text{avg}}}{\\partial V_{DD}} \\propto \\frac{\\partial I_{D,\\text{sat}}}{\\partial V_{DD}} \\sim g_m$.\n\n---\n\n### Summary\n1. **Yes, the answer changes:** The inverters no longer behave as three parallel pairs of series diode-connected transistors.\n2. **Physical mechanism:** During oscillation, only one stage transitions at a time while the other two have one transistor in cutoff and the other in triode; current is drawn primarily to charge the load capacitances ($I_{DD} = 3 C_L V_{DD} f_{osc}$).\n3. **Magnitude:** While the cycle-averaged incremental resistance $R_X$ still scales inversely with device transconductance ($\\propto 1/g_m$) due to the dependence of $f_{osc}$ on $V_{DD}$, its actual value is roughly **$2\\times$ to $3\\times$ larger** than $\\frac{1}{3}(1/g_{mn} + 1/g_{mp})$ because only one stage actively draws charging/transition current from $V_{DD}$ at a time rather than all three conducting simultaneously.",
        "format": "markdown",
        "sha256": "39e125e5f7876e1e925211399946377a888b30eecc2b75bb2bb5895f9a638f87"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive charging as the dominant oscillating-current mechanism and derives an average resistance of order 1/gm. However, it overstates the increase as significant and attributes it to only one stage drawing current at a time; the golden solution says the resistance remains not much higher than the static estimate.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2454,
        "output_tokens": 18194,
        "total_tokens": 20648,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15526,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1227,
        "output_tokens": 9097,
        "total_tokens": 10324,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7763,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is the **StrongARM latch** (originally analyzed in this form by B. Razavi). As the width of the tail transistor $M_7$ increases, the **initial voltage gain decreases**. \n\nHere is the step-by-step physical and mathematical explanation of why this happens:\n\n---\n\n### 1. Operation During the Initial Amplification Phase\n* **Precharge ($CK = 0$):** Switches $S_1\\text{--}S_4$ precharge nodes $P, Q, X,$ and $Y$ to $V_{DD}$. Transistors $M_3\\text{--}M_6$ are initially off.\n* ** amplification begins ($CK = V_{DD}$):** Switches $S_1\\text{--}S_4$ turn off and the tail transistor $M_7$ turns on, sinking a tail current $I_{D7}$. Because $P$ and $Q$ are initially at $V_{DD}$, the input pair $M_1$ and $M_2$ operate in saturation.\n* Nodes $P$ and $Q$ discharge from $V_{DD}$ until their voltages drop by roughly $V_{THN}$ (reaching $V_{DD} - V_{THN}$), at which point the cross-coupled NMOS pair $M_3$ and $M_4$ turns on.\n\n---\n\n### 2. Expression for Initial Voltage Gain\nLet $C_{P,Q}$ be the total parasitic capacitance at node $P$ (or $Q$). \n\n1. **Integration Time ($\\Delta t$):** \n   Each branch carries an average common-mode current of $I_{D1,2} = I_{D7}/2$. The time required for nodes $P$ and $Q$ to fall by $V_{THN}$ is:\n   $$\\Delta t \\approx \\frac{C_{P,Q} V_{THN}}{I_{D7}/2} = \\frac{2 C_{P,Q} V_{THN}}{I_{D7}}$$\n\n2. **Differential Output Voltage:** \n   During this interval $\\Delta t$, the small-signal differential current $\\Delta I = g_{m1,2}(V_{in1} - V_{in2})$ integrates onto $C_{P,Q}$, creating a differential voltage between $P$ and $Q$:\n   $$|V_P - V_Q| = \\frac{g_{m1,2} |V_{in1} - V_{in2}|}{C_{P,Q}} \\Delta t$$\n\n3. **Initial Voltage Gain ($A_v$):** \n   Substituting $\\Delta t$ into the differential voltage equation yields the initial voltage gain just before $M_3$ and $M_4$ turn on:\n   $$A_v = \\frac{|V_P - V_Q|}{|V_{in1} - V_{in2}|} = \\frac{2 g_{m1,2} V_{THN}}{I_{D7}} = \\frac{g_{m1,2} V_{THN}}{I_{D1,2}}$$\n\n   Using the square-law relationships $g_{m1,2} = \\sqrt{2 \\mu_n C_{ox} (W/L)_{1,2} I_{D1,2}}$ and $\\frac{g_m}{I_D} = \\frac{2}{V_{GS} - V_{TH}}$, we can rewrite this as:\n   $$A_v = 2 V_{THN} \\sqrt{\\frac{\\mu_n C_{ox} (W/L)_{1,2}}{I_{D7}}} = \\frac{2 V_{THN}}{(V_{GS} - V_{TH})_{1,2}}$$\n\n---\n\n### 3. Effect of Increasing the Width of $M_7$\nWhen the width $W_7$ is increased:\n1. **Tail Current Increases:** $M_7$ pulls more tail current $I_{D7}$ (and pulls the common-source node of $M_1\\text{--}M_2$ closer to ground, increasing their overdrive voltage $(V_{GS} - V_{TH})_{1,2}$).\n2. **Integration Time Shrinks Faster than $g_m$ Grows:** While the transconductance $g_{m1,2}$ increases proportionally to $\\sqrt{I_{D7}}$, the integration time $\\Delta t$ decreases proportionally to $1/I_{D7}$ because nodes $P$ and $Q$ discharge to $V_{DD} - V_{THN}$ much faster.\n3. **Net Result:** Since $A_v \\propto \\frac{g_{m1,2}}{I_{D7}} \\propto \\frac{1}{\\sqrt{I_{D7}}}$, **the initial voltage gain decreases** as $W_7$ increases (eventually plateauing at a minimum value once $W_7$ is large enough that $M_7$ operates in the deep triode region with nearly zero drain-to-source voltage).",
        "format": "markdown",
        "sha256": "68d7500d950f427d45e48c88fa48e33b15723fe289d95741d2f58f0b2f0123da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that increasing M7 width raises tail current and that the input-pair transconductance grows more slowly, so the initial gain factor gm/ICM decreases. The derivation is consistent with the approximate integration-gain relation.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1122,
        "output_tokens": 3096,
        "total_tokens": 4218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1991,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1122,
        "output_tokens": 3096,
        "total_tokens": 4218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1991,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the shown **StrongARM latch** circuit, as the width of $M_7$ ($W_7$) increases, the initial voltage gain **decreases** (and eventually levels off to a constant minimum value once $M_7$ enters the deep triode region).\n\n---\n\n### **Step-by-Step Analysis**\n\n#### **1. Initial Amplification Phase**\n* **Precharge ($CK = 0$):** $M_7$ is OFF, and switches $S_1 - S_4$ precharge nodes $P, Q, X,$ and $Y$ to $V_{DD}$.\n* **Sampling/Amplification ($CK = V_{DD}$):** $S_1 - S_4$ turn OFF and $M_7$ turns ON, drawing a tail current $I_{D7}$. The input differential pair ($M_1, M_2$) steers this current to discharge the parasitic capacitances at nodes $P$ and $Q$ ($C_P = C_Q$).\n* This initial amplification phase continues until the common-mode voltage at nodes $P$ and $Q$ drops by the threshold voltage of $M_3$ and $M_4$ ($V_{TH3,4}$), at which point the cross-coupled transistors $M_3$ and $M_4$ turn ON.\n\n#### **2. Derivation of the Initial Voltage Gain**\nThe time $\\Delta t$ required for the average voltage at nodes $P$ and $Q$ to drop from $V_{DD}$ to $V_{DD} - V_{TH3,4}$ is:\n$$\\Delta t \\approx \\frac{C_P V_{TH3,4}}{I_{D7} / 2} = \\frac{2 C_P V_{TH3,4}}{I_{D7}}$$\n\nDuring this interval $\\Delta t$, the small-signal differential current $\\Delta I_D = g_{m1,2}(V_{\\text{in1}} - V_{\\text{in2}})$ integrates onto the capacitances $C_P$ and $C_Q$, producing a differential voltage:\n$$|V_P - V_Q| = \\frac{g_{m1,2} |V_{\\text{in1}} - V_{\\text{in2}}| \\Delta t}{C_P}$$\n\nSubstituting $\\Delta t$ into the expression above gives the initial voltage gain $A_v$:\n$$A_v = \\left| \\frac{V_P - V_Q}{V_{\\text{in1}} - V_{\\text{in2}}} \\right| = \\frac{2 g_{m1,2} V_{TH3,4}}{I_{D7}} = \\left(\\frac{g_{m1,2}}{I_{D1,2}}\\right) V_{TH3,4}$$\n\n#### **3. Effect of Increasing $W_7$**\nUsing the square-law MOSFET model for $M_1$ and $M_2$ (where $I_{D1,2} = I_{D7}/2$):\n$$\\frac{g_{m1,2}}{I_{D1,2}} = \\frac{2}{(V_{GS} - V_{TH})_{1,2}} = \\sqrt{\\frac{4 \\mu_n C_{ox} (W/L)_{1,2}}{I_{D7}}}$$\n\nSubstituting this back into the gain equation gives:\n$$A_v = \\frac{2 V_{TH3,4}}{(V_{GS} - V_{TH})_{1,2}} = 2 V_{TH3,4} \\sqrt{\\frac{\\mu_n C_{ox} (W/L)_{1,2}}{I_{D7}}}$$\n\n---\n\n### **Conclusion & Physical Intuition**\n1. **Why the gain decreases:** As $W_7$ increases, the tail current $I_{D7}$ increases. While a larger tail current increases the transconductance $g_{m1,2}$ proportional to $\\sqrt{I_{D7}}$, it reduces the integration time $\\Delta t$ faster (inversely proportional to $I_{D7}$). Because $g_m/I_D$ decreases at higher currents, the net initial voltage gain **decreases** as $\\propto \\frac{1}{\\sqrt{I_{D7}}}$.\n2. **Saturation at very large $W_7$:** If $W_7$ is increased further, $M_7$ enters the deep triode region and pulls the common-source node of $M_1$ and $M_2$ all the way to ground. At this point, $(V_{GS} - V_{TH})_{1,2}$ reaches its maximum limit of $V_{\\text{in,CM}} - V_{TH1,2}$, and the initial voltage gain flattens out at a minimum value of:\n   $$A_{v,\\text{min}} \\approx \\frac{2 V_{TH3,4}}{V_{\\text{in,CM}} - V_{TH1,2}}$$",
        "format": "markdown",
        "sha256": "8d7ed2d7d037962daf41586791d61f04cec9b445f7b5700ee9542ee9b5021ab1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that initial gain decreases as wider M7 increases tail current, and explains that gm grows more slowly than current while the integration time shortens. The added large-width saturation caveat does not change the core conclusion.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1122,
        "output_tokens": 3458,
        "total_tokens": 4580,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2362,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1122,
        "output_tokens": 3458,
        "total_tokens": 4580,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2362,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As the width of $M_7$ ($W_7$) increases, the initial voltage gain **decreases**.\n\n---\n\n### **Detailed Explanation & Derivation**\n\nThe circuit shown is a **StrongARM latch** comparator. Its operation after the clock ($CK$) transitions high begins with an initial **amplification (sampling) phase** before regeneration takes over:\n\n1. **Initial Precharge State ($CK = 0$):**\n   Switches $S_1$–$S_4$ precharge nodes $P, Q, X,$ and $Y$ to $V_{DD}$. Transistors $M_3$–$M_6$ and $M_7$ are off.\n\n2. **Amplification Phase ($CK = 1$):**\n   When $CK$ goes high, $S_1$–$S_4$ turn off and the tail transistor $M_7$ turns on. The input differential pair ($M_1, M_2$) begins discharging the parasitic capacitances at nodes $P$ and $Q$ ($C_{P,Q}$). \n   \n   This initial phase continues for a duration $\\Delta t$ until the common-mode voltage at nodes $P$ and $Q$ drops by roughly one threshold voltage ($V_{THN}$) to $V_{DD} - V_{THN}$, at which point $M_3$ and $M_4$ turn on.\n\n   * **Integration Time ($\\Delta t$):**\n     Since each branch carries an average common-mode current of $I_{D1,2} \\approx I_{D7}/2$, the time required for $P$ and $Q$ to drop by $V_{THN}$ is:\n     $$\\Delta t \\approx \\frac{C_{P,Q} V_{THN}}{I_{D1,2}}$$\n\n   * **Differential Voltage Developed ($\\Delta V_{PQ}$):**\n     During this time $\\Delta t$, a small differential input voltage $\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$ produces a differential current $\\Delta I_D = g_{m1,2}\\Delta V_{\\text{in}}$, which integrates onto $C_{P,Q}$:\n     $$\\Delta V_{PQ} = \\frac{\\Delta I_D \\cdot \\Delta t}{C_{P,Q}} = \\frac{g_{m1,2} \\Delta V_{\\text{in}}}{C_{P,Q}} \\cdot \\Delta t$$\n\n   * **Initial Voltage Gain ($A_v$):**\n     Substituting $\\Delta t$ into the expression for $\\Delta V_{PQ}$ yields the initial voltage gain at nodes $P$ and $Q$:\n     $$A_v = \\frac{\\Delta V_{PQ}}{\\Delta V_{\\text{in}}} = \\left(\\frac{g_{m1,2}}{I_{D1,2}}\\right) V_{THN}$$\n\n     Using the square-law MOSFET equations, where $g_{m1,2} = \\sqrt{2\\mu_n C_{ox} (W/L)_{1,2} I_{D1,2}}$ and $\\frac{g_m}{I_D} = \\frac{2}{V_{GS} - V_{THN}}$, we can write this as:\n     $$A_v = \\frac{2 V_{THN}}{(V_{GS} - V_{THN})_{1,2}} = V_{THN} \\sqrt{\\frac{2\\mu_n C_{ox} (W/L)_{1,2}}{I_{D1,2}}}$$\n\n---\n\n### **Effect of Increasing the Width of $M_7$**\n\nWhen the width of $M_7$ increases:\n1. **Tail Current Increases:** Whether $M_7$ operates in saturation or in the triode region (where a larger width reduces its on-resistance and pulls the source node of $M_1$–$M_2$ closer to ground), increasing $W_7$ **increases the tail current $I_{D7}$** (and thus increases $I_{D1,2} = I_{D7}/2$).\n2. **Integration Time Drops Faster than $g_m$ Rises:** \n   * The transconductance of the input pair only grows with the square root of the current ($g_{m1,2} \\propto \\sqrt{I_{D7}}$).\n   * However, the integration time before $M_3$ and $M_4$ turn on shrinks inversely with the current ($\\Delta t \\propto \\frac{1}{I_{D7}}$).\n   * Equivalently, a larger current increases the overdrive voltage $(V_{GS} - V_{THN})_{1,2}$ of $M_1$ and $M_2$, reducing their $g_m/I_D$ efficiency.\n\nTherefore, the net product $g_{m1,2}\\Delta t$ decreases as $A_v \\propto \\frac{1}{\\sqrt{I_{D7}}}$, meaning **the initial voltage gain decreases** (at the benefit of a faster comparison speed, $\\Delta t$, and at the cost of higher input-referred offset and noise from $M_3$–$M_6$).",
        "format": "markdown",
        "sha256": "f3b5465fa3aee65037a791ac1d09b670dc766d4312a035978aa0f26e89e52239"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that increasing M7 width raises tail current and reduces initial gain: the input-pair transconductance grows more slowly than current, so the gain factor decreases. The explanation is physically consistent with the golden solution.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1122,
        "output_tokens": 3424,
        "total_tokens": 4546,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2281,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1122,
        "output_tokens": 3424,
        "total_tokens": 4546,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2281,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain **remains unchanged** (it is independent of the capacitance at nodes $P$ and $Q$). \n\nWhile it might intuitively seem that a larger capacitance $C_{P,Q}$ would reduce the voltage gain by slowing down the rate at which nodes $P$ and $Q$ discharge, it simultaneously increases the integration time available before $M_3$ and $M_4$ turn on by the exact same factor.\n\n---\n\n### Step-by-Step Derivation\n\n1. **Precharge Phase ($CK = 0$):**\n   Switches $S_1\\text{–}S_4$ precharge nodes $P$, $Q$, $X$, and $Y$ to $V_{DD}$, while $M_7$ is OFF. Because $V_X = V_Y = V_P = V_Q = V_{DD}$, transistors $M_3$ and $M_4$ have $V_{GS3,4} = 0$ and are initially OFF.\n\n2. **Initial Amplification / Sampling Phase ($CK$ goes high):**\n   When $CK$ transitions to $V_{DD}$, $S_1\\text{–}S_4$ turn OFF and $M_7$ turns ON. Input transistors $M_1$ and $M_2$ operate in saturation and draw currents from nodes $P$ and $Q$. \n   \n   This initial integration phase lasts until the common-mode voltage at nodes $P$ and $Q$ drops by the threshold voltage of $M_3$ and $M_4$ ($V_{TH3,4}$), at which point $M_3$ and $M_4$ turn ON.\n\n3. **Duration of the Initial Phase ($t_1$):**\n   With an average (common-mode) current of $I_{\\text{tail}}/2$ discharging each node, the time $t_1$ required for $V_P$ and $V_Q$ to drop from $V_{DD}$ to $V_{DD} - V_{TH3,4}$ is:\n   $$t_1 = \\frac{C_{P,Q} \\, V_{TH3,4}}{I_{\\text{tail}}/2}$$\n\n4. **Differential Voltage and Initial Gain at $t = t_1$:**\n   During this interval $t_1$, the small-signal differential current $\\Delta I_D = g_{m1,2} \\Delta V_{\\text{in}}$ integrates onto $C_{P,Q}$ to produce a differential voltage $\\Delta V_{PQ}$:\n   $$\\Delta V_{PQ}(t_1) = \\frac{\\Delta I_D}{C_{P,Q}} \\cdot t_1 = \\frac{g_{m1,2} \\Delta V_{\\text{in}}}{C_{P,Q}} \\left( \\frac{C_{P,Q} \\, V_{TH3,4}}{I_{\\text{tail}}/2} \\right)$$\n\n   Notice that $C_{P,Q}$ **cancels out**, leaving the initial voltage gain:\n   $$A_{v,\\text{init}} = \\frac{\\Delta V_{PQ}(t_1)}{\\Delta V_{\\text{in}}} = \\frac{g_{m1,2} V_{TH3,4}}{I_{\\text{tail}}/2} \\approx \\frac{2 V_{TH3,4}}{(V_{GS} - V_{TH})_{1,2}}$$\n\n---\n\n### Summary of Physical Intuition & Trade-offs\n* **Gain:** **Unchanged.** Doubling $C_{P,Q}$ halves the differential slew rate $\\left(\\frac{\\Delta I_D}{C_{P,Q}}\\right)$, but doubles the integration time $t_1$ before $M_3$ and $M_4$ turn on.\n* **Speed:** **Decreases.** The delay $t_1$ before regeneration begins increases linearly with $C_{P,Q}$.\n* **Thermal Noise:** **Improves (decreases).** Because the initial signal gain is independent of $C_{P,Q}$ while the integrated thermal noise variance at nodes $P$ and $Q$ scales as $\\propto \\frac{kT}{C_{P,Q}}$, increasing $C_{P,Q}$ reduces the input-referred thermal noise at the cost of slower regeneration and higher dynamic power consumption.",
        "format": "markdown",
        "sha256": "32833dfae2f56b9a910458bef0c4c9de686f1ba61b316e76014a58b997fe4abc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is unchanged and shows the capacitance cancels because the slower discharge proportionally lengthens the amplification interval. The added speed and noise comments are secondary to the question.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 5452,
        "total_tokens": 6573,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4506,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 5452,
        "total_tokens": 6573,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4506,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To first order, **the initial voltage gain remains unchanged** (it is independent of the capacitance at nodes $P$ and $Q$). \n\nHere is the step-by-step mathematical and physical explanation from the standard analysis of the **StrongARM latch**:\n\n---\n\n### 1. Mathematical Derivation\n\n* **Precharge Phase ($CK = 0$):** \n  Switches $S_1$–$S_4$ are ON and $M_7$ is OFF, precharging nodes $P, Q, X,$ and $Y$ to $V_{DD}$.\n\n* **Initial Amplification Phase ($CK = V_{DD}$):** \n  When $CK$ goes high, $S_1$–$S_4$ turn OFF and $M_7$ turns ON. Because $X, Y, P,$ and $Q$ are initially at $V_{DD}$, transistors $M_3$–$M_6$ are initially OFF. The input differential pair ($M_1, M_2$) operates in saturation and begins discharging the capacitances at nodes $P$ and $Q$ ($C_P = C_Q = C_{P,Q}$).\n\n  1. **Differential Voltage Growth:** \n     A small differential input voltage $\\Delta V_{\\text{in}} = V_{\\text{in1}} - V_{\\text{in2}}$ produces a differential drain current $\\Delta I_D = g_{m1,2}\\Delta V_{\\text{in}}$, which integrates onto $C_{P,Q}$ over time $t$:\n     $$|V_P - V_Q| \\approx \\frac{g_{m1,2} |V_{\\text{in1}} - V_{\\text{in2}}|}{C_{P,Q}} \\cdot t$$\n\n  2. **Duration of the Initial Phase ($t_1$):** \n     This initial integration phase continues until the common-mode voltage at nodes $P$ and $Q$ drops by the NMOS threshold voltage $V_{THN}$ (reaching $V_{DD} - V_{THN}$), at which point the cross-coupled transistors $M_3$ and $M_4$ turn ON. With each branch carrying an average common-mode current $I_{CM}$, the time $t_1$ required for this drop is:\n     $$t_1 \\approx \\frac{C_{P,Q} V_{THN}}{I_{CM}}$$\n\n  3. **Initial Voltage Gain ($A_v$):** \n     Substituting $t_1$ into the differential voltage equation gives the voltage gain at the end of the initial phase:\n     $$A_v = \\frac{|V_P - V_Q|}{|V_{\\text{in1}} - V_{\\text{in2}}|} \\approx \\frac{g_{m1,2}}{C_{P,Q}} \\cdot \\left(\\frac{C_{P,Q} V_{THN}}{I_{CM}}\\right) = \\frac{g_{m1,2} V_{THN}}{I_{CM}} = \\frac{2 V_{THN}}{(V_{GS} - V_{THN})_{1,2}}$$\n\nNotice that **$C_{P,Q}$ completely cancels out**.\n\n---\n\n### 2. Physical Intuition\n\nIncreasing $C_P$ and $C_Q$ has two opposing effects that exactly cancel each other:\n1. **Slower differential integration:** A larger capacitance reduces the rate (slew rate) at which the differential voltage $|V_P - V_Q|$ builds up.\n2. **Longer integration time:** The same larger capacitance slows down the common-mode voltage drop at $P$ and $Q$ by the exact same factor, delaying the turn-on of $M_3$ and $M_4$ and allowing the differential current to integrate for a proportionally longer time.\n\n*(Note: While the initial voltage gain does not change, increasing $C_P$ and $C_Q$ increases the regeneration delay $t_1$ and dynamic power consumption, though it lowers the $kT/C$ thermal noise contribution at those nodes).*",
        "format": "markdown",
        "sha256": "73c33c48f9abe087d5b0b0299b0e36ea9fe2a9a3f79c495bfccca5f6036f595e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is unchanged and explains the cancellation: larger capacitance slows differential-voltage growth but proportionally extends the amplification interval. Minor phase and timing details do not affect the essential answer.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 3539,
        "total_tokens": 4660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2645,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 3539,
        "total_tokens": 4660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2645,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is the classic **StrongARM latch** (a dynamic regenerative comparator). \n\nIf you increase the capacitance at nodes $P$ and $Q$ ($C_{P,Q}$), the **initial voltage gain remains unchanged** (to a first-order approximation), though the time required to reach that gain increases proportionally.\n\nHere is the step-by-step circuit analysis explaining why $C_{P,Q}$ cancels out:\n\n---\n\n### 1. Precharge Phase ($CK = 0$)\nWhen $CK$ is low, the tail transistor $M_7$ is OFF, and the PMOS switches $S_1 - S_4$ are ON. This precharges the internal nodes $P$ and $Q$ as well as the output nodes $X$ and $Y$ to $V_{DD}$.\n\n---\n\n### 2. Initial Amplification (Sampling) Phase ($CK \\rightarrow V_{DD}$)\nWhen $CK$ goes high:\n* Switches $S_1 - S_4$ turn OFF, and $M_7$ turns ON, sinking a tail current $I_0$.\n* Because $P, Q, X,$ and $Y$ all start at $V_{DD}$, the cross-coupled transistors $M_3 - M_6$ all initially have $V_{GS} = 0$ and remain **OFF**.\n* Consequently, the drain currents of the input differential pair ($I_{D1}$ and $I_{D2}$) initially flow **exclusively** out of the capacitances at nodes $P$ and $Q$ ($C_{P,Q}$).\n\nIntegrating these currents on $C_{P,Q}$ over time $t$ produces a growing differential voltage between nodes $P$ and $Q$:\n$$|V_P(t) - V_Q(t)| = \\frac{|I_{D1} - I_{D2}|}{C_{P,Q}} \\cdot t = \\frac{g_{m1,2} |V_{\\text{in1}} - V_{\\text{in2}}|}{C_{P,Q}} \\cdot t$$\n\n---\n\n### 3. Duration of the Initial Phase ($t_1$)\nThis initial integration phase continues until the common-mode voltage at nodes $P$ and $Q$ drops low enough to turn on $M_3$ and $M_4$ (i.e., when $V_P$ and $V_Q$ fall from $V_{DD}$ to $V_{DD} - V_{TH3,4}$).\n\nSince the average discharging current on each side is $I_0 / 2$, the time $t_1$ required to drop by one threshold voltage $V_{TH3,4}$ is:\n$$t_1 \\approx \\frac{C_{P,Q} V_{TH3,4}}{I_0 / 2}$$\n\n---\n\n### 4. Initial Voltage Gain ($A_{v1}$)\nSubstituting $t_1$ into the differential voltage equation gives the initial voltage gain developed across $P$ and $Q$ at the moment $M_3$ and $M_4$ turn on:\n$$A_{v1} = \\frac{|V_P(t_1) - V_Q(t_1)|}{|V_{\\text{in1}} - V_{\\text{in2}}|} \\approx \\frac{g_{m1,2}}{\\cancel{C_{P,Q}}} \\cdot \\frac{\\cancel{C_{P,Q}} V_{TH3,4}}{I_0 / 2} = \\frac{g_{m1,2} V_{TH3,4}}{I_0 / 2}$$\n\nUsing the square-law relation $\\frac{g_m}{I_D} = \\frac{2}{V_{GS} - V_{TH}}$, this simplifies to:\n$$A_{v1} \\approx \\frac{2 V_{TH3,4}}{(V_{GS} - V_{TH})_{1,2}}$$\n\n---\n\n### Physical Intuition & Practical Trade-offs\n* **Why $C_{P,Q}$ cancels out:** Increasing $C_{P,Q}$ reduces the slope (slew rate) at which $V_P$ and $V_Q$ fall ($\\propto 1/C_{P,Q}$), which reduces the rate of differential voltage buildup. However, it simultaneously stretches the integration time $t_1$ before $M_3$ and $M_4$ turn on by the **exact same factor** ($\\propto C_{P,Q}$). The two effects cancel out, leaving the initial voltage gain $A_{v1}$ unchanged.\n* **What *does* change when $C_{P,Q}$ increases:**\n  1. **Speed decreases:** The initial delay $t_1$ increases linearly with $C_{P,Q}$.\n  2. **Thermal noise decreases:** Because $C_{P,Q}$ acts as an integrating capacitor, a larger $C_{P,Q}$ reduces the $kT/C$ input-referred thermal noise of the comparator.\n  3. **Second-stage offset/noise suppression improves:** Once $M_3$ and $M_4$ turn on to discharge the output nodes $X$ and $Y$, a larger $C_{P,Q}$ acts as a larger charge reservoir holding the differential voltage $|V_P - V_Q|$, which marginally increases the effective gain into nodes $X$ and $Y$ and reduces the input-referred offset contribution of the upper transistors ($M_3 - M_6$).",
        "format": "markdown",
        "sha256": "54ec198cd0faef3e4644568b4cfce7d6192df8262eb4a06956a2493e16b15be4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain is essentially unchanged and explains the cancellation: larger capacitance slows differential buildup but lengthens the amplification phase proportionally. It also correctly notes the increased delay; the ancillary claims do not change the central answer.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 3980,
        "total_tokens": 5101,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2775,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 3980,
        "total_tokens": 5101,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2775,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the StrongARM latch (as analyzed in Behzad Razavi’s classic paper, *\"The StrongARM Latch [A Circuit for All Seasons]\"*), increasing the widths of $M_5$ and $M_6$ generally **degrades** the speed (beyond a very small optimum size). In practical designs, $M_5$ and $M_6$ are typically sized near the minimum width.\n\nTo understand why, we can look at the competing effects of $M_5$ and $M_6$ during the different phases of evaluation when $CK$ goes high:\n\n---\n\n### 1. Before $M_5$ and $M_6$ Turn On (Speed Degrades)\n* **Initial state:** At the beginning of the evaluation phase ($CK = V_{DD}$), nodes $X$ and $Y$ are precharged to $V_{DD}$. Thus, $V_{GS5} = V_{GS6} = 0$, meaning **$M_5$ and $M_6$ are completely OFF**.\n* **NMOS discharge and initial regeneration:** Once nodes $P$ and $Q$ discharge to $V_{DD} - V_{THN}$, the cross-coupled NMOS pair ($M_3$ and $M_4$) turns on and begins discharging nodes $X$ and $Y$ while initiating positive feedback.\n* **Pure capacitive loading:** Until $V_X$ and $V_Y$ drop below $V_{DD} - |V_{THP}|$, $M_5$ and $M_6$ remain OFF. During this critical window, they contribute **zero transconductance ($g_{m5,6} = 0$)** and act purely as parasitic capacitive loads ($C_{GS}$, $C_{GD}$, and $C_{DB}$) at nodes $X$ and $Y$. \n* Increasing $W_5$ and $W_6$ increases the total capacitance $C_{X,Y}$, which:\n  1. Increases the time required to discharge $X$ and $Y$ down to $V_{DD} - |V_{THP}|$:\n     $$t_{discharge} \\propto \\frac{C_{X,Y} |V_{THP}|}{I_{CM}}$$\n  2. Increases (slows down) the initial NMOS regeneration time constant:\n     $$\\tau_{reg1} \\approx \\frac{C_{X,Y}}{g_{m3,4}}$$\n\n---\n\n### 2. After $M_5$ and $M_6$ Turn On (Trade-Off)\nOnce $V_X$ and $V_Y$ fall below $V_{DD} - |V_{THP}|$, $M_5$ and $M_6$ turn on and assist in the regeneration process. Here, two competing effects occur:\n* **Transconductance vs. Capacitance:** The regeneration time constant becomes:\n  $$\\tau_{reg2} \\approx \\frac{C_{other} + C_{5,6}}{g_{m3,4} + g_{m5,6}}$$\n  While increasing $W_{5,6}$ increases $g_{m5,6}$, it simultaneously increases $C_{5,6}$. Because PMOS transistors have lower hole mobility ($\\mu_p < \\mu_n$), they yield less transconductance per unit of parasitic capacitance compared to the NMOS pair ($M_3, M_4$).\n* **Contention on the falling node:** As $X$ and $Y$ fall together before a large differential voltage develops, both $M_5$ and $M_6$ momentarily turn on and inject current *into* nodes $X$ and $Y$, fighting the pull-down action of $M_3$ and $M_4$.\n* **Pull-up recovery:** The primary benefit of larger $M_5$ and $M_6$ is that they more quickly pull the \"winning\" high output back up to $V_{DD}$. However, because both $X$ and $Y$ are precharged to $V_{DD}$, the StrongARM latch typically drives a NAND-based SR latch that triggers on the **falling** output—making the pull-down speed far more critical than the pull-up recovery.\n\n---\n\n### Summary\nBecause $M_5$ and $M_6$ remain **OFF** for a large portion of the comparison cycle while directly loading the critical output nodes $X$ and $Y$ with gate and drain capacitance, **increasing their widths degrades the overall speed of the latch.**",
        "format": "markdown",
        "sha256": "382ce1f29c00ac6c614f0de91ff29b83be961ba049c5538e6241549e017d26d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that wider M5/M6 add capacitance and can eventually limit speed, but concludes that speed degrades initially. The key result is the opposite: stronger regeneration dominates added capacitance over the initial sizing range, improving speed up to an optimum.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 3756,
        "total_tokens": 4877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2780,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 3756,
        "total_tokens": 4877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2780,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In general, increasing the widths of $M_5$ and $M_6$ **degrades the speed** of the StrongARM latch (assuming the external load capacitance at $V_{\\text{out}}$ is not excessively large). For this reason, $M_5$ and $M_6$ are typically designed to be near minimum width.\n\nWe can see why by examining the phases of operation after $CK$ goes high:\n\n### 1. Initial Discharge and NMOS Regeneration ($V_X, V_Y > V_{DD} - |V_{THP}|$)\n* When $CK$ transitions to $V_{DD}$, nodes $P$ and $Q$ discharge first until $M_3$ and $M_4$ turn on. \n* Once $M_3$ and $M_4$ turn on, output nodes $X$ and $Y$ begin discharging from $V_{DD}$. However, **$M_5$ and $M_6$ remain completely OFF** until $V_X$ and $V_Y$ drop below $V_{DD} - |V_{THP}|$.\n* Throughout this critical phase, $M_5$ and $M_6$ contribute **zero transconductance ($g_{m5,6} = 0$)**, acting purely as parasitic capacitive loads ($C_{GS}$, $C_{GD}$, and $C_{DB}$) on nodes $X$ and $Y$.\n* Increasing $W_5$ and $W_6$ increases the total capacitance at $X$ and $Y$ ($C_{X,Y}$), which:\n  1. Slows down the slewing/discharge rate of nodes $X$ and $Y$, delaying the turn-on of $M_5$ and $M_6$:\n     $$\\Delta t \\approx \\frac{|V_{THP}| C_{X,Y}}{I_{\\text{tail}}/2}$$\n  2. Increases (worsens) the initial regeneration time constant provided by $M_3$ and $M_4$ before $M_5$ and $M_6$ wake up:\n     $$\\tau_{\\text{reg1}} \\approx \\frac{C_{X,Y}}{g_{m3,4}}$$\n\n### 2. Full Latch Regeneration ($V_X, V_Y < V_{DD} - |V_{THP}|$)\n* Once $V_X$ and $V_Y$ fall below $V_{DD} - |V_{THP}|$, $M_5$ and $M_6$ turn on and assist in regeneration, yielding a time constant of:\n  $$\\tau_{\\text{reg2}} \\approx \\frac{C_{X,Y}}{g_{m3,4} + g_{m5,6}}$$\n* In this phase, increasing $W_5$ and $W_6$ increases both $g_{m5,6}$ (in the denominator) and $C_{X,Y}$ (in the numerator). Because PMOS transistors have lower hole mobility than NMOS electrons, they have a relatively poor $g_m$-to-capacitance ratio, meaning their added self-loading capacitance largely offsets the benefit of their increased $g_m$.\n\n---\n\n### Summary / Exception\n* **Overall Speed:** **Degrades**, because $M_5$ and $M_6$ dead-load the output nodes during the initial evaluation and amplification phases when the latch is most sensitive.\n* **Exception:** Increasing $W_5$ and $W_6$ only improves speed if:\n  1. Nodes $X$ and $Y$ are driving a **very large external load capacitance** (so the self-loading of $M_5$ and $M_6$ is negligible compared to the fixed load), or\n  2. The following stage is triggered solely by the **rising edge** (pull-up recovery back to $V_{DD}$) of the winning output node rather than the falling edge.",
        "format": "markdown",
        "sha256": "4456fadc2d88d1a44de1d49e5d944a677a8c5205477de70baa10d56b7aecd507"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer recognizes that wider M5/M6 increase both regenerative transconductance and capacitance, but concludes that capacitance dominates from the outset. The golden solution says regeneration wins initially, so the stated speed trend and sizing recommendation are wrong.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 3735,
        "total_tokens": 4856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2877,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 3735,
        "total_tokens": 4856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2877,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Whether increasing the widths of $M_5$ and $M_6$ improves or degrades the speed of the **StrongARM latch** depends on the phase of operation, though **in practice, making $M_5$ and $M_6$ large degrades the overall speed** (unless nodes $X$ and $Y$ are driving a large external load capacitance). \n\nWe can see why by analyzing the phases of operation after $CK$ goes high:\n\n---\n\n### 1. Initial Discharge & Early Regeneration ($V_{X,Y} > V_{DD} - |V_{THP}|$) $\\rightarrow$ **Speed Degrades**\nWhen $CK$ transitions from $0$ to $V_{DD}$:\n1. $M_7$ turns on, and $M_1, M_2$ discharge nodes $P$ and $Q$ from $V_{DD}$ down to $V_{DD} - V_{THN}$.\n2. $M_3$ and $M_4$ turn on and begin discharging nodes $X$ and $Y$ from $V_{DD}$ while initiating positive feedback (regeneration).\n\nDuring this entire time—until $V_X$ and $V_Y$ fall below $V_{DD} - |V_{THP}|$—**$M_5$ and $M_6$ are completely OFF**. Increasing their widths $W_5$ and $W_6$:\n* Contributes **zero transconductance** ($g_{m5,6} = 0$).\n* Directly increases the parasitic capacitance at nodes $X$ and $Y$ ($C_{gs5,6}$, $C_{gd5,6}$, and $C_{db5,6}$).\n\nAs a result, both the time required to turn on $M_5$ and $M_6$ and the initial NMOS regeneration time constant increase:\n$$\\Delta t_{\\text{turn-on}} \\approx \\frac{C_{X,Y} |V_{THP}|}{I_{\\text{tail}}/2}, \\qquad \\tau_{\\text{reg,1}} = \\frac{C_{X,Y}}{g_{m3,4}}$$\nBecause a substantial portion of the comparator's decision happens during this interval, extra capacitance from $M_5$ and $M_6$ directly slows down the latch.\n\n---\n\n### 2. Late Regeneration & Pull-Up ($V_{X,Y} < V_{DD} - |V_{THP}|$) $\\rightarrow$ **Trade-Off (Can Improve Pull-Up)**\nOnce $V_X$ and $V_Y$ drop below $V_{DD} - |V_{THP}|$, $M_5$ and $M_6$ turn **ON**:\n* **Regeneration time constant:** The positive feedback loop now includes both the NMOS and PMOS cross-coupled pairs:\n  $$\\tau_{\\text{reg,2}} \\approx \\frac{C_{X,Y}}{g_{m3,4} + g_{m5,6}}$$\n* **Pull-up recovery:** As one output discharges to $0\\text{ V}$ (cutting off the opposite NMOS transistor), the corresponding PMOS transistor ($M_5$ or $M_6$) pulls the other output node back up from $V_{DD} - |V_{THP}|$ to $V_{DD}$.\n\nIn this phase, increasing $W_5$ and $W_6$ increases $g_{m5,6}$ and lowers the PMOS on-resistance $R_{\\text{on5,6}}$, which helps pull the rising output back to $V_{DD}$ faster—**provided** the fixed capacitance at nodes $X$ and $Y$ (from $M_3, M_4$, $S_3, S_4$, and the external load $C_L$) dominates over the self-loading capacitance of $M_5$ and $M_6$.\n\n---\n\n### 3. Reset / Precharge Phase ($CK = 0$) $\\rightarrow$ **Speed Degrades**\nWhen $CK = 0$, precharge switches $S_3$ and $S_4$ must pull nodes $X$ and $Y$ back to $V_{DD}$. Increasing $W_5$ and $W_6$ increases $C_X$ and $C_Y$, which increases the reset time constant.\n\n---\n\n### Summary / Design Conclusion\n* **If $W_5$ and $W_6$ are increased beyond a small/moderate size, the overall speed degrades** because $M_5$ and $M_6$ act purely as dead capacitive loads on nodes $X$ and $Y$ until $V_X$ and $V_Y$ drop by $|V_{THP}|$, slowing down both the initial discharge and the NMOS regeneration phase.\n* **Exception:** If the output nodes $X$ and $Y$ drive a large external load capacitance $C_L$ (such as a subsequent SR latch or buffer), slightly increasing $W_5$ and $W_6$ can improve the final pull-up transition to $V_{DD}$ without significantly increasing the total percentage capacitance at $X$ and $Y$.",
        "format": "markdown",
        "sha256": "d5d0c5d80a7ceafc2682ec03c4950623b3c5caadffef84ec9edf6cbde4db4b60"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that wider M5/M6 strengthen PMOS regeneration and pull-up while adding node capacitance, but concludes the capacitance dominates and speed degrades. The golden solution says the regeneration benefit dominates initially, with capacitance limiting speed only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 5466,
        "total_tokens": 6587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4340,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1121,
        "output_tokens": 5466,
        "total_tokens": 6587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4340,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths ($W_{\\text{CK}}$) of the clocked transistors **initially improves the speed, reaches an optimum point, and then degrades the speed** if the widths are increased further. \n\nHere is the detailed physical and mathematical breakdown of why this happens:\n\n---\n\n### 1. Competing Effects on Resistance and Capacitance\n\nIn both the first and second clocked inverter stages, each clocked transistor is in series with a data-driven transistor (such as $M_1$).\n\n1. **Series Resistance Decreases (Helps Speed):**\n   The total equivalent resistance driving node $X$ (or node $Y$) during a transition is the sum of the on-resistance of the data transistor ($R_{M1}$) and the on-resistance of the clocked transistor ($R_{\\text{CK}}$):\n   $$R_{\\text{tot}} = R_{M1} + R_{\\text{CK}} = R_{M1} + \\frac{R_0}{W_{\\text{CK}}}$$\n   where $R_0$ is the resistance per unit width. Increasing $W_{\\text{CK}}$ reduces $R_{\\text{CK}}$, allowing more current to charge or discharge the output node. However, because $R_{M1}$ is fixed, the total resistance cannot be reduced below $R_{M1}$.\n\n2. **Parasitic Capacitance Increases (Hurts Speed):**\n   Because the gates of the clocked transistors are driven by the clock ($CK$ and $\\overline{CK}$) rather than the signal loop, increasing $W_{\\text{CK}}$ does not increase the gate capacitance seen by the preceding logic stage. **However**, the drains of the clocked transistors are tied directly to the output nodes $X$ and $Y$ (and their sources add capacitance to the internal stack nodes). Thus, the total capacitance at node $X$ (or $Y$) increases linearly with $W_{\\text{CK}}$:\n   $$C_{\\text{tot}} = C_{\\text{next}} + C_{\\text{d,CK}} = C_{\\text{next}} + C_0 W_{\\text{CK}}$$\n   where $C_{\\text{next}}$ is the fixed input gate capacitance of the following stage and $C_0$ is the drain/source parasitic capacitance per unit width.\n\n---\n\n### 2. Delay Analysis ($\\tau = R_{\\text{tot}} C_{\\text{tot}}$)\n\nMultiplying the total resistance and capacitance gives the time constant at nodes $X$ and $Y$:\n\n$$\\tau = \\left( R_{M1} + \\frac{R_0}{W_{\\text{CK}}} \\right) \\left( C_{\\text{next}} + C_0 W_{\\text{CK}} \\right)$$\n\n$$\\tau = \\underbrace{R_{M1}C_{\\text{next}} + R_0 C_0}_{\\text{Constant}} + \\underbrace{\\frac{R_0 C_{\\text{next}}}{W_{\\text{CK}}}}_{\\text{Decreases with } W_{\\text{CK}}} + \\underbrace{R_{M1} C_0 W_{\\text{CK}}}_{\\text{Increases with } W_{\\text{CK}}}$$\n\n* **For small to moderate $W_{\\text{CK}}$ (Speed Improves):** \n  When $W_{\\text{CK}}$ is small, $R_{\\text{CK}}$ dominates the resistance and $C_{\\text{next}}$ dominates the capacitance. Increasing $W_{\\text{CK}}$ rapidly reduces the $\\frac{R_0 C_{\\text{next}}}{W_{\\text{CK}}}$ term without adding significant drain capacitance, so the delay decreases and **speed improves**.\n\n* **For large $W_{\\text{CK}}$ (Speed Degrades):** \n  Once $W_{\\text{CK}}$ becomes large enough that $R_{\\text{CK}} \\ll R_{M1}$, the pull-down/pull-up current becomes bottlenecked by the fixed resistance $R_{M1}$. Making the clocked transistors any wider yields negligible improvement in drive current, while their drain capacitance ($C_0 W_{\\text{CK}}$) continues to grow linearly and must be charged/discharged through $R_{M1}$. The $R_{M1} C_0 W_{\\text{CK}}$ term dominates, and **speed degrades**.\n\n* **Optimum Width:**\n  Taking the derivative $\\frac{\\partial \\tau}{\\partial W_{\\text{CK}}} = 0$ yields the optimal width for maximum operating frequency:\n  $$W_{\\text{CK,opt}} = \\sqrt{\\frac{R_0 C_{\\text{next}}}{R_{M1} C_0}}$$\n\n---\n\n### 3. Practical Effect on Clock Buffers\nIn a real implementation where $CK$ and $\\overline{CK}$ are driven by clock buffers with finite output impedance, excessively increasing $W_{\\text{CK}}$ also increases the gate capacitance loading the clock lines. This slows down the clock transition edges (increasing rise/fall times), which further **degrades** the maximum operating speed of the divider.",
        "format": "markdown",
        "sha256": "0d58953b91d4becf57bb49d2b3534600d46ea6745641825f8da43e25d00a7e37"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing the clocked devices’ on-resistance, while added capacitance at the latch nodes eventually limits or reverses the benefit, yielding an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1130,
        "output_tokens": 3817,
        "total_tokens": 4947,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1130,
        "output_tokens": 3817,
        "total_tokens": 4947,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In this circuit (a dynamic divide-by-2 frequency divider based on clocked CMOS, or $\\text{C}^2\\text{MOS}$, inverters), increasing the widths ($W_{\\text{ck}}$) of the clocked transistors causes the speed to **initially improve, reach a maximum at an optimal width, and then degrade** if increased further.\n\nHere is the detailed physical breakdown of why both effects occur:\n\n---\n\n### 1. Why the Speed Initially Improves (Resistance Reduction)\nIn both clocked stages, the pull-up and pull-down paths consist of an outer data-driven transistor (such as $M_1$) in series with an inner clocked transistor. \n\n* The total resistance driving node $X$ or $Y$ is the sum of the two series resistances:\n  $$R_{\\text{total}} = R_{\\text{data}} + R_{\\text{ck}}$$\n* When the clocked transistors are relatively narrow, their on-resistance ($R_{\\text{ck}} \\propto \\frac{1}{W_{\\text{ck}}}$) dominates the series path. \n* Increasing $W_{\\text{ck}}$ reduces $R_{\\text{ck}}$ and increases the charging/discharging current available to nodes $X$ and $Y$, **improving the switching speed**.\n\n---\n\n### 2. Why the Speed Eventually Degrades (Parasitic Self-Loading)\nBecause the widths of the outer data transistors ($M_1$ and the top PMOS transistors) remain fixed, the series resistance cannot be reduced below $R_{\\text{data}}$ no matter how wide the clocked transistors are made:\n\n* **Current Bottleneck:** Once the clocked transistors are wide enough that $R_{\\text{ck}} \\ll R_{\\text{data}}$, the drive current is bottlenecked by the outer data transistors. Increasing $W_{\\text{ck}}$ further yields diminishing returns in drive strength.\n* **Direct Capacitive Loading at $X$ and $Y$:** Because the clocked transistors are placed on the inside of the stack (connected directly to the output nodes $X$ and $Y$), their drain-bulk junction capacitances ($C_{db}$) and gate-drain overlap capacitances ($C_{gd}$) load nodes $X$ and $Y$ directly:\n  $$C_{\\text{total}} = C_{\\text{fixed}} + C_{\\text{ck}} \\quad \\text{where } C_{\\text{ck}} \\propto W_{\\text{ck}}$$\n* Once the drive current saturates (limited by $M_1$), making the clocked transistors wider simply adds parasitic capacitance to nodes $X$ and $Y$ (as well as the internal intermediate nodes between the series transistors), **degrading the speed**.\n\n---\n\n### 3. Mathematical Summary (Finding the Optimum)\nWe can express the first-order $RC$ time constant ($\\tau$) at node $X$ or $Y$ as a function of the clocked transistor width $W_{\\text{ck}}$:\n\n$$\\tau(W_{\\text{ck}}) = R_{\\text{total}} \\cdot C_{\\text{total}} = \\left( R_{\\text{data}} + \\frac{R_0}{W_{\\text{ck}}} \\right) \\left( C_{\\text{fixed}} + C_0 W_{\\text{ck}} \\right)$$\n\nExpanding this gives:\n\n$$\\tau(W_{\\text{ck}}) = \\underbrace{R_{\\text{data}} C_{\\text{fixed}} + R_0 C_0}_{\\text{Constant}} + \\underbrace{\\frac{R_0 C_{\\text{fixed}}}{W_{\\text{ck}}}}_{\\text{Decreases with } W_{\\text{ck}}} + \\underbrace{R_{\\text{data}} C_0 W_{\\text{ck}}}_{\\text{Increases with } W_{\\text{ck}}}$$\n\n* **Small $W_{\\text{ck}}$:** The $\\frac{1}{W_{\\text{ck}}}$ term dominates $\\rightarrow$ increasing $W_{\\text{ck}}$ reduces delay (**speed improves**).\n* **Large $W_{\\text{ck}}$:** The linear $W_{\\text{ck}}$ term dominates $\\rightarrow$ increasing $W_{\\text{ck}}$ increases delay (**speed degrades**).\n* **Optimal Width:** The minimum delay (maximum operating frequency) occurs when the two variable terms are balanced:\n  $$W_{\\text{ck,opt}} = \\sqrt{\\frac{R_0 C_{\\text{fixed}}}{R_{\\text{data}} C_0}}$$\n\n*(Note: In a practical implementation with finite clock-buffer drive strength, overly wide clocked transistors also increase the gate capacitance on the $CK$ and $\\overline{CK}$ lines, degrading the clock slew rate and reducing the maximum operating frequency even further.)*",
        "format": "markdown",
        "sha256": "a3e78b37d4c5d73200678e9a488bf7654e401f6dbc4e351d0ea0f6a82e2db697"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening the clocked transistors initially improves speed by reducing their on-resistance, while added capacitance at the latch nodes eventually limits or reverses the benefit, producing an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1130,
        "output_tokens": 3931,
        "total_tokens": 5061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1130,
        "output_tokens": 3931,
        "total_tokens": 5061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given dynamic divide-by-2 circuit (composed of two clocked CMOS [$\\text{C}^2\\text{MOS}$] stages and an inverter $\\text{Inv}_3$ in a feedback loop), increasing the widths ($W_{\\text{ck}}$) of the clocked transistors causes the speed to **initially improve, reach a maximum at an optimal width, and then degrade** if increased further.\n\nThis behavior arises from two competing effects on the $RC$ time constants at nodes $X$ and $Y$:\n\n---\n\n### 1. Why the Speed Initially Improves (Resistance Reduction)\nDuring a pull-down or pull-up transition at node $X$ or $Y$, the clocked transistor is in series with the input-driven transistor (such as $M_1$ in the pull-down path). \n* The total series resistance is:\n  $$R_{\\text{total}} = R_{M1} + R_{\\text{ck}} = R_{M1} + \\frac{R_0}{W_{\\text{ck}}}$$\n* When the clocked transistors are small, their on-resistance $R_{\\text{ck}}$ dominates the series path ($R_{\\text{ck}} \\gg R_{M1}$). Increasing $W_{\\text{ck}}$ directly reduces $R_{\\text{total}}$ and increases the charging/discharging current available to nodes $X$ and $Y$, thereby **improving the speed**.\n\n---\n\n### 2. Why the Speed Eventually Degrades (Self-Loading Capacitance)\nWhile the input transistors ($M_1$ and the top PMOS devices) have fixed widths, widening the clocked transistors linearly increases their parasitic capacitances:\n1. **Output Node Loading:** The drain-bulk ($C_{db}$) and gate-drain overlap ($C_{gd}$) capacitances of the clocked devices connect directly to the output nodes $X$ and $Y$:\n   $$C_{\\text{total}} = C_{\\text{load}} + C_{\\text{ck}} = C_{\\text{load}} + C_0 W_{\\text{ck}}$$\n   where $C_{\\text{load}}$ is the fixed gate capacitance of the following stage (Stage 2 for node $X$, and $\\text{Inv}_3$ for node $Y$).\n2. **Internal Node Loading:** The source-bulk ($C_{sb}$) and gate-source ($C_{gs}$) capacitances at the internal nodes between $M_1$ (or the top PMOS) and the clocked devices also grow linearly with $W_{\\text{ck}}$, requiring more charge to be moved through $M_1$.\n\nWhen $W_{\\text{ck}}$ becomes large ($R_{\\text{ck}} \\ll R_{M1}$), the total pull-down/pull-up resistance hits a floor set by the fixed resistance $R_{M1}$ of the unclocked transistors. Beyond this point, increasing $W_{\\text{ck}}$ yields negligible reduction in resistance while continuing to add parasitic capacitance that $M_1$ must discharge, **degrading the speed**.\n\n*(Additionally, in a practical system with finite clock buffers, larger clocked transistors present a heavier capacitive load to $CK$ and $\\overline{CK}$, slowing down the clock transition edges.)*\n\n---\n\n### 3. Mathematical Summary & Optimum Width\nApproximating the propagation delay time constant $\\tau$ at node $X$ or $Y$:\n\n$$\\tau \\approx R_{\\text{total}} C_{\\text{total}} = \\left(R_{M1} + \\frac{R_0}{W_{\\text{ck}}}\\right)\\left(C_{\\text{load}} + C_0 W_{\\text{ck}}\\right)$$\n\nExpanding this expression shows the trade-off explicitly:\n\n$$\\tau \\approx \\underbrace{R_{M1} C_{\\text{load}} + R_0 C_0}_{\\text{Constant}} + \\underbrace{\\frac{R_0 C_{\\text{load}}}{W_{\\text{ck}}}}_{\\substack{\\text{Decreases with } W_{\\text{ck}} \\\\ \\text{(Speed improves)}}} + \\underbrace{R_{M1} C_0 W_{\\text{ck}}}_{\\substack{\\text{Increases with } W_{\\text{ck}} \\\\ \\text{(Speed degrades)}}}$$\n\n* **Small $W_{\\text{ck}}$:** The $\\frac{1}{W_{\\text{ck}}}$ term dominates $\\rightarrow$ increasing $W_{\\text{ck}}$ **improves** speed.\n* **Large $W_{\\text{ck}}$:** The linear $W_{\\text{ck}}$ term dominates $\\rightarrow$ increasing $W_{\\text{ck}}$ **degrades** speed.\n* **Optimal $W_{\\text{ck}}$:** Setting $\\frac{\\partial \\tau}{\\partial W_{\\text{ck}}} = 0$ gives the maximum operating speed when the resistance and capacitance ratios are balanced:\n  $$W_{\\text{ck,opt}} = \\sqrt{\\frac{R_0 C_{\\text{load}}}{R_{M1} C_0}} \\implies \\frac{R_{\\text{ck}}}{R_{M1}} = \\frac{C_{\\text{ck}}}{C_{\\text{load}}}$$",
        "format": "markdown",
        "sha256": "b642d07aeaa5a9139a60287d10c42f0e9daa1c2f9dc3755100c5c9cb2fc7b5c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening the clocked devices initially improves speed by reducing their on-resistance, while added capacitance eventually limits or reverses the benefit, producing an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1130,
        "output_tokens": 4163,
        "total_tokens": 5293,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1130,
        "output_tokens": 4163,
        "total_tokens": 5293,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, the circuit provides quadrature outputs at nodes **$X$** and **$Y$** (with a $90^\\circ$ phase difference), provided the input clock ($CK$) has a 50% duty cycle. \n\nBelow is a detailed breakdown of how the circuit operates and the exact phase relationships between its nodes.\n\n---\n\n### 1. Circuit Operation (Dynamic $C^2\\text{MOS}$ Divide-by-2)\nThe structure is a dynamic frequency divider composed of two clocked CMOS ($C^2\\text{MOS}$) inverters acting as a master-slave latch pair, followed by a standard static inverter ($\\text{Inv}_3$) to provide overall negative feedback:\n\n* **When $CK = 1$ ($\\overline{CK} = 0$):**\n  * **Stage 1 (Left)** is enabled (transparent) and acts as an inverter, sampling $Z$ to produce $X = \\overline{Z}$. Thus, **$X$ changes state on the rising edge of $CK$**.\n  * **Stage 2 (Middle)** is disabled (in a high-impedance state), dynamically holding the previous logic level at node $Y$ on its parasitic capacitance.\n\n* **When $CK = 0$ ($\\overline{CK} = 1$):**\n  * **Stage 1 (Left)** is disabled, holding the value of $X$.\n  * **Stage 2 (Middle)** is enabled and acts as an inverter, sampling $X$ to produce $Y = \\overline{X}$. Thus, **$Y$ changes state on the falling edge of $CK$**.\n  * **Stage 3 ($\\text{Inv}_3$)** continuously inverts $Y$ to produce $Z = \\overline{Y}$.\n\n---\n\n### 2. Timing and Phase Analysis\n\nLet us trace the state transitions across four consecutive clock half-cycles (assuming an initial state of $X=0, Y=1, Z=0$):\n\n| Clock Phase | Clock Edge | Node $X$ | Node $Y$ | Node $Z = \\overline{Y}$ |\n| :--- | :--- | :---: | :---: | :---: |\n| **Initial** | — | $0$ | $1$ | $0$ |\n| **Half-cycle 1** ($CK=1$) | $\\uparrow$ Rising edge of $CK$ | $0 \\rightarrow \\mathbf{1}$ | $1$ (held) | $0$ |\n| **Half-cycle 2** ($CK=0$) | $\\downarrow$ Falling edge of $CK$ | $1$ (held) | $1 \\rightarrow \\mathbf{0}$ | $0 \\rightarrow \\mathbf{1}$ |\n| **Half-cycle 3** ($CK=1$) | $\\uparrow$ Rising edge of $CK$ | $1 \\rightarrow \\mathbf{0}$ | $0$ (held) | $1$ |\n| **Half-cycle 4** ($CK=0$) | $\\downarrow$ Falling edge of $CK$ | $0$ (held) | $0 \\rightarrow \\mathbf{1}$ | $1 \\rightarrow \\mathbf{0}$ |\n\n1. **Frequency Division:** The outputs repeat every 4 clock half-cycles, meaning the output period is twice the input clock period ($T_{\\text{out}} = 2T_{CK}$).\n2. **Quadrature Relationship Between $X$ and $Y$:**\n   * Node $X$ transitions after the **rising edge** of $CK$ (delayed by one clocked-inverter propagation delay, $t_{p,\\text{C2MOS}}$).\n   * Node $Y$ transitions after the **falling edge** of $CK$ (also delayed by one clocked-inverter propagation delay, $t_{p,\\text{C2MOS}}$).\n   * Assuming $CK$ has a **50% duty cycle**, the time between the rising and falling edges is $T_{CK}/2$. Relative to the divided output period ($T_{\\text{out}} = 2T_{CK}$), this time shift corresponds to a phase difference of:\n     $$\\Delta \\phi_{XY} = 360^\\circ \\times \\frac{T_{CK}/2}{2T_{CK}} = 90^\\circ$$\n\n---\n\n### 3. Practical Considerations\n* **Nodes $X$ and $Y$ (True Quadrature):** Because both $X$ and $Y$ experience the same single-stage $C^2\\text{MOS}$ delay relative to the clock edges, they are well-aligned in quadrature ($90^\\circ$ apart), provided the capacitive loads at nodes $X$ and $Y$ are matched.\n* **Node $Z$ (Phase Skew):** While $Z$ is logically $\\overline{Y}$ (and therefore nominally in quadrature with $X$ as well), it experiences the extra propagation delay of the static inverter $\\text{Inv}_3$ ($t_{p,\\text{Inv3}}$). At very high frequencies, where $t_{p,\\text{Inv3}}$ is a noticeable fraction of $T_{CK}$, the phase difference between $X$ and $Z$ deviates from $90^\\circ$ by $\\Delta \\phi_{\\text{error}} = 360^\\circ \\times (t_{p,\\text{Inv3}} / 2T_{CK})$.",
        "format": "markdown",
        "sha256": "194f5f48840f470884e6789bd2ff61bea3d8b7b7e57be159aabc449162d0cd2a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies nominal divide-by-two quadrature and the skew from Inv3. It mentions that X and Y need matched loads, but does not clearly identify the unequal loading of the two latch outputs as a cause of non-ideal quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3751,
        "total_tokens": 4867,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2602,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3751,
        "total_tokens": 4867,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2602,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, the circuit generates **single-ended quadrature outputs** between nodes **$X$** and **$Y$** (assuming a 50% duty-cycle clock), though with important practical limitations if full 4-phase (differential) quadrature signals are needed.\n\n---\n\n### 1. How It Produces a $90^\\circ$ Phase Shift\n\nThis structure is a dynamic **divide-by-2 circuit** (a master–slave configuration formed by two clocked CMOS inverters and a static inverter $\\text{Inv}_3$):\n\n1. **On the rising edge of $CK$ ($CK = 1, \\overline{CK} = 0$):**\n   * **Stage 1 (left)** turns on and samples $Z$, so node $X$ transitions to $\\overline{Z}$.\n   * **Stage 2 (middle)** turns off and holds the previous value of $Y$ (and therefore $Z$) dynamically on its parasitic capacitance.\n\n2. **On the falling edge of $CK$ ($CK = 0, \\overline{CK} = 1$):**\n   * **Stage 1** turns off and holds the state of $X$.\n   * **Stage 2** turns on and samples $X$, causing node $Y$ to transition to $\\overline{X}$ (and $Z$ to transition to $\\overline{Y}$ after the delay of $\\text{Inv}_3$).\n\n3. **Phase Relationship:**\n   * A complete cycle at $X$, $Y$, and $Z$ requires two full clock periods ($T_{\\text{out}} = 2T_{CK}$).\n   * Because $X$ changes state on the **rising** edges of $CK$ and $Y$ changes state on the **falling** edges of $CK$, the transitions of $X$ and $Y$ are separated by half a clock period ($T_{CK}/2$):\n     $$\\Delta t = \\frac{T_{CK}}{2} = \\frac{T_{\\text{out}}}{4} \\implies \\Delta \\phi = 90^\\circ$$\n   *Note: As long as $Z$ settles before the next rising edge of $CK$, the delay of $\\text{Inv}_3$ is absorbed during the $CK = 0$ half-cycle and does not corrupt the $90^\\circ$ timing between $X$ and $Y$.*\n\n---\n\n### 2. Practical Caveats and Limitations\n\nWhile $X$ and $Y$ are nominally in quadrature, in high-frequency RF design this topology has three notable limitations compared to a conventional differential static divider:\n\n* **No true 4-phase (differential) quadrature outputs ($I, \\overline{I}, Q, \\overline{Q}$):** \n  * There is no complementary node for $X$ ($\\overline{X}$).\n  * Although $Z = \\overline{Y}$, $Z$ is delayed relative to $Y$ by the propagation delay of $\\text{Inv}_3$ ($t_{d,\\text{Inv3}}$). At very high frequencies where $t_{d,\\text{Inv3}}$ is a significant fraction of $T_{CK}$, $Y$ and $Z$ are no longer $180^\\circ$ out of phase, and $X$ and $Z$ are no longer separated by $90^\\circ$.\n* **Sensitivity to Clock Duty Cycle:** \n  * Because $X$ is triggered by the rising edge of $CK$ and $Y$ by the falling edge, any departure from a 50% clock duty cycle translates directly into a quadrature phase error between $X$ and $Y$.\n* **Load Mismatch:** \n  * Exact $90^\\circ$ spacing between $X$ and $Y$ relies on Stage 1 and Stage 2 having identical propagation delays. Any mismatch in capacitance at nodes $X$ and $Y$ (especially once external buffers are attached) introduces a static phase error.",
        "format": "markdown",
        "sha256": "37852328c5120af2f012bc9b67eb4fe0214f6ba7da714d2e4ae1eb3336ca59e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the latches switching on opposite clock edges, and explains both departures from exact quadrature: Inv3 delay skews Z, while unequal latch loading can skew X and Y. The extra practical caveats do not undermine the essential answer.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3886,
        "total_tokens": 5002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3038,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3886,
        "total_tokens": 5002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3038,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, this circuit (a dynamic C²MOS divide-by-2 frequency divider) provides quadrature outputs—specifically between nodes **$X$** and **$Y$** (or **$X$** and **$Z$**, up to one inverter delay).\n\n---\n\n### 1. Circuit Operation & Timing Analysis\n\nThe circuit consists of two clocked CMOS ($\\text{C}^2\\text{MOS}$) inverter stages clocked on opposite phases, followed by a static inverter ($\\text{Inv}_3$) to provide the third inversion needed for oscillation/toggling in the feedback loop:\n\n1. **When $CK = 1$ ($\\overline{CK} = 0$):**\n   * **Stage 1 (driving $X$) is ON (transparent):** It inverts the feedback signal $Z$, so $X$ transitions to $\\overline{Z}$ on the **rising edge** of $CK$.\n   * **Stage 2 (driving $Y$) is OFF (in hold mode):** Node $Y$ is high-impedance and holds its previous logic state on its parasitic capacitance. Consequently, $Z = \\overline{Y}$ also remains unchanged.\n\n2. **When $CK = 0$ ($\\overline{CK} = 1$):**\n   * **Stage 1 (driving $X$) is OFF (in hold mode):** Node $X$ is isolated and retains the value it sampled when $CK$ was high.\n   * **Stage 2 (driving $Y$) is ON (transparent):** It inverts the held value at $X$, so $Y$ transitions to $\\overline{X}$ on the **falling edge** of $CK$.\n   * **Stage 3 ($\\text{Inv}_3$):** Immediately inverts $Y$ to produce $Z = \\overline{Y} = X$ (delayed by the propagation delay of $\\text{Inv}_3$).\n\n3. **Next cycle ($CK = 0 \\to 1$):**\n   * Because $Z$ now holds the same logic value as $X$, when Stage 1 turns back ON at the next rising edge of $CK$, $X$ is forced to $\\overline{Z} = \\overline{X_{\\text{prev}}}$. Thus, the circuit toggles every clock cycle, dividing the clock frequency by 2 ($T_{\\text{out}} = 2T_{CK}$).\n\n---\n\n### 2. Why the Outputs are in Quadrature ($90^\\circ$ Phase Shift)\n\n* **Node $X$** changes state on every **rising edge** of $CK$.\n* **Node $Y$** (and **$Z$**) changes state on every **falling edge** of $CK$.\n\nAssuming $CK$ has a 50% duty cycle, the time difference between a rising edge and the subsequent falling edge is half a clock period:\n$$\\Delta t = \\frac{T_{CK}}{2}$$\n\nSince the output period of the divide-by-2 circuit is $T_{\\text{out}} = 2T_{CK}$, this time delay corresponds to a quarter of the output period:\n$$\\Delta t = \\frac{T_{\\text{out}}}{4} \\implies \\Delta \\phi = 360^\\circ \\times \\frac{1}{4} = 90^\\circ$$\n\nTherefore, **$X$ and $Y$ are $90^\\circ$ out of phase (in quadrature)**.\n\n---\n\n### 3. Practical Considerations & Imperfections\n\nIn an actual RF/high-speed implementation, a few non-idealities affect the exact quadrature accuracy:\n\n1. **Delay of $\\text{Inv}_3$ ($Y$ vs. $Z$):** \n   * Both $X$ and $Y$ change state one clocked-inverter delay ($t_{d,\\text{C2MOS}}$) after their respective clock edges, making **$X$ and $Y$** true quadrature signals. \n   * Node **$Z$** experiences an additional static inverter delay ($t_{d,\\text{Inv3}}$) relative to $Y$. At very high frequencies, $t_{d,\\text{Inv3}}$ is a noticeable fraction of the period, introducing a phase error between $X$ and $Z$ (and causing $Y$ and $Z$ to deviate slightly from $180^\\circ$).\n2. **Clock Duty-Cycle Sensitivity:** \n   * Because $X$ is triggered by the rising edge of $CK$ and $Y$ is triggered by the falling edge of $CK$, any deviation from a **50% clock duty cycle** directly translates into a quadrature phase error.\n3. **Load Mismatch & Dynamic Nodes:** \n   * Nodes $X$ and $Y$ are dynamic (high-impedance during their hold phase) and drive different gate structures ($X$ drives a clocked stage; $Y$ drives a static inverter). To extract quadrature signals without corrupting the held charge or skewing the delays, identically sized buffers/inverters should be placed at $X$ and $Y$.",
        "format": "markdown",
        "sha256": "11b9658f6dc9839789eed5ca1ab627ebaab8610c7ed1c53119c13cd1be918517"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the opposite-phase latch transitions, and notes both the Inv3 delay affecting Z and the different loads driven by X and Y as sources of phase error. The added duty-cycle caveat is also reasonable.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 4188,
        "total_tokens": 5304,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3119,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 4188,
        "total_tokens": 5304,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3119,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The speed of the circuit **improves** (up to a practical limit) when we increase the widths of the clocked transistors. \n\nHere is the detailed circuit intuition behind why this happens:\n\n### 1. Reduced On-Resistance Without Loading the Signal Path\n* This circuit is a dynamic master–slave divide-by-2 frequency divider (composed of two clocked $\\text{C}^2\\text{MOS}$ inverting latches and one static inverter in a feedback loop).\n* If you increase the widths of the **inner (data-driven) transistors**, you reduce their on-resistance, but you simultaneously increase their gate capacitance, which directly loads the output of the preceding stage in the loop.\n* In contrast, the gates of the **clocked transistors** are driven by the external clock ($CK$ and $\\overline{CK}$), **not** by the feedback signal in the loop. Therefore, increasing the widths of the clocked transistors reduces the series pull-up and pull-down on-resistance ($R_{on}$) of the stages **without adding any gate capacitance to the critical signal path**.\n\n### 2. Placement Near the Supply Rails\n* Because the clocked transistors are placed at the top and bottom (connected to $V_{DD}$ and ground) rather than at the output nodes:\n  * Their **source junction capacitances** are tied directly to the supply rails and have no effect on switching speed.\n  * Their **drain junction capacitances** appear only at the *intermediate* nodes (between the clocked and data transistors) rather than directly loading the output nodes of each stage.\n\n---\n\n### Practical Upper Limit (Diminishing Returns)\nWhile increasing the widths of the clocked transistors improves speed initially (typically when sized $2\\times$ to $3\\times$ wider than minimum/nominal), making them excessively wide will eventually yield diminishing returns or degrade performance due to:\n1. **Internal Node Capacitance & Charge Sharing:** The parasitic drain capacitance at the intermediate nodes becomes large enough to slow down internal transitions and cause charge-sharing voltage droop when the inner transistors switch while the clocked transistors are off.\n2. **Clock Buffer Loading:** The input capacitance seen by the $CK$ and $\\overline{CK}$ drivers increases proportionally with transistor width, increasing clock power consumption and potentially slowing down the clock edges.",
        "format": "markdown",
        "sha256": "4bcff389cc57348d7d7ea4b2af6272725d8f626c3698296943f101de8d5342c1"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed by reducing their series on-resistance without substantially loading the data outputs, and identifies charge sharing as a practical limit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2274,
        "output_tokens": 15448,
        "total_tokens": 17722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14484,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1137,
        "output_tokens": 7724,
        "total_tokens": 8861,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7242,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors **improves** the speed of the circuit (up to a point of diminishing returns), assuming the external clock buffers are strong enough to drive the increased clock capacitance.\n\n### 1. Why the Speed Improves\n* **Reduced Series ON-Resistance:** During the evaluation phase of each clocked inverter stage, the clocked transistors are in series with the inner (signal) transistors. Increasing the widths ($W$) of the clocked transistors reduces their channel ON-resistance ($R_{\\text{on}} \\propto 1/W$), which reduces the overall pull-up and pull-down resistance driving the output node of each stage.\n* **No Gate-Capacitance Loading on the Signal Path:** Unlike the inner transistors, the gates of the clocked transistors are driven by the external clock signals ($CK$ and $\\overline{CK}$) rather than by the internal nodes of the feedback loop. Therefore, making them wider does **not** increase the gate capacitance loading the preceding stage.\n* **Drain Capacitance is Not at the Output Node:** Because the clocked transistors are placed at the power rails ($V_{DD}$ and ground) rather than at the output nodes, their drain capacitances reside at the internal nodes (the sources of the inner signal transistors) rather than directly loading the stage outputs. When the clock activates a stage, the clocked transistors pull their own drain capacitances to $V_{DD}$ and ground with a self-loading time constant ($R_{\\text{on}}C_d$) that remains roughly independent of $W$, while providing a lower-impedance path to charge or discharge the output load.\n\n---\n\n### 2. Practical Limits and Second-Order Effects\nWhile increasing the widths of the clocked transistors initially improves the maximum operating frequency, doing so excessively introduces several trade-offs:\n1. **Diminishing Returns:** Once the ON-resistance of the clocked transistors becomes much smaller than that of the inner signal transistors, the total resistance is dominated by the inner transistors, and further increases in width yield negligible speed improvement.\n2. **Charge Sharing:** When $CK = 0$, the first stage is off (holding its output dynamically), while the second stage and the static inverter evaluate and toggle the feedback signal driving the gates of the first stage. When the inner transistor of the first stage turns on while its clocked transistors are off, the dynamic output node shares charge with the floating internal node (the drain of the clocked transistor). If the clocked transistors are made excessively wide, the large capacitance at this internal node can cause significant voltage droop on the held output.\n3. **Clock Buffer Loading:** Wider clocked transistors present a larger capacitive load to the $CK$ and $\\overline{CK}$ lines, increasing dynamic power dissipation and potentially degrading the clock slew rate if the clock drivers have finite output impedance.",
        "format": "markdown",
        "sha256": "50d8f69d417686611e97d526e3630dbde563d2ea622eaaecd45a87351fd06234"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed by reducing their series on-resistance while adding little output loading. It also identifies charge sharing as a limit on the benefit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2274,
        "output_tokens": 20134,
        "total_tokens": 22408,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1137,
        "output_tokens": 10067,
        "total_tokens": 11204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9488,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In this dynamic divide-by-2 circuit, increasing the widths of the clocked transistors introduces a **trade-off**: the speed **initially improves** (for small-to-moderate widths) due to reduced series resistance, but **eventually degrades** (if made too wide) due to **charge sharing** at the internal nodes and increased clock loading.\n\nHere is the detailed breakdown of both effects:\n\n---\n\n### 1. Why Speed Improves (Reduced $R_{\\text{on}}$ Without Direct Output Loading)\n* **Higher Drive Current:** The clocked transistors act as switches in series with the inner inverter transistors. Increasing their widths ($W$) reduces their on-resistance ($R_{\\text{on}}$), which increases the charging and discharging current during each stage's active phase.\n* **Shielded Output Nodes:** Because the clocked transistors are placed at the rails ($V_{DD}$ and ground) rather than at the output nodes, their drain junction capacitances do **not** directly load the output nodes of Stage 1 or Stage 2. \n\nConsequently, when starting from minimum-sized devices, widening the clocked transistors decreases the $RC$ time constant of the active pull-up and pull-down paths and **improves the maximum operating speed**.\n\n---\n\n### 2. Why Speed Degrades if Made Too Wide (Charge Sharing & Parasitics)\nBecause this topology uses only three inversions in the loop (two clocked inverters and one static inverter), the input to Stage 1 changes **while Stage 1 is in its off (hold) state**, leading to a critical **charge-sharing** problem:\n\n1. **Pre-discharging the internal node ($CK = 1$):** \n   Suppose the feedback signal (input to Stage 1) is initially `0`. When $CK = 1$ ($\\overline{CK} = 0$), Stage 1 is active and pulls its output node high to $V_{DD}$ (`1`). At the same time, the bottom clocked NMOS of Stage 1 is ON, discharging the internal node (between the two NMOS transistors) to `0` (ground).\n2. **Input transition during hold ($CK = 0$):** \n   When $CK$ falls to `0` ($\\overline{CK} = 1$), Stage 1 turns OFF, dynamically holding its output at $V_{DD}$, while Stage 2 turns ON. The signal propagates through Stage 2 and the static inverter, driving the input of Stage 1 from `0` to `1` **while $CK$ is still `0`**.\n3. **Charge sharing:** \n   When the input of Stage 1 rises to `1`, the inner NMOS of Stage 1 turns ON. This connects the dynamically held output of Stage 1 (at $V_{DD}$) directly to the internal node at the drain of the bottom clocked NMOS (which is sitting at ground). \n\nIf you increase the widths of the clocked transistors too much:\n* **Voltage Droop (Slower Stage 2):** The parasitic drain capacitance of the clocked transistors becomes large. Through charge sharing, it steals a significant amount of charge from the output node of Stage 1, causing the held voltage level to droop. A lower input voltage to Stage 2 reduces its overdrive voltage ($V_{GS} - V_{TH}$), **degrading its switching speed** (and potentially causing the circuit to fail altogether).\n* **Clock Buffer Loading:** Larger clocked transistors also present a much heavier gate capacitance to the $CK$ and $\\overline{CK}$ lines, slowing down the clock transitions if driven by realistic clock buffers.\n\n---\n\n### Summary\n* **Moderate increase in width $\\rightarrow$ Speed improves** (reduced series resistance dominates, and the output node is shielded from the clocked transistor's drain capacitance).\n* **Excessive increase in width $\\rightarrow$ Speed degrades** (charge sharing corrupts the dynamically held voltage levels on Stage 1's output, reducing Stage 2's gate overdrive, while heavy gate capacitance slows down the clock edges).",
        "format": "markdown",
        "sha256": "a181c413401449a4a81ae5a6651193a9a2afea62ffa747cbbbb12bdc71c49217"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says widening initially improves speed by reducing series resistance with little output loading, and identifies charge sharing as a limit at excessive widths.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2274,
        "output_tokens": 10964,
        "total_tokens": 13238,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9270,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1137,
        "output_tokens": 5482,
        "total_tokens": 6619,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4635,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The arrangement shown in the figure is a **dynamic divide-by-2 frequency divider** (equivalently, a **dynamic master–slave toggle flip-flop**). \n\nAlthough at first glance the three inverters in a loop resemble a **3-stage ring oscillator**, the presence of the two switches driven by complementary clocks ($CK$ and $\\overline{CK}$) ensures that **the loop is never completely closed at any single instant**. Instead, the signal propagation is paced step-by-step by the clock edges.\n\n---\n\n### 1. Structural Breakdown\n\nTo understand the circuit intuitively, we can break it down into a standard **Master–Slave D-Flip-Flop (DFF)** with inverted feedback:\n\n1. **Master Latch ($CK$ switch + $\\text{Inv}_1$):** Samples the feedback signal when $CK = 1$ and holds it dynamically on the input gate capacitance of $\\text{Inv}_1$ when $CK = 0$.\n2. **Slave Latch ($\\overline{CK}$ switch + first unmarked inverter, $\\text{Inv}_2$):** Transfers the output of $\\text{Inv}_1$ to the output of $\\text{Inv}_2$ when $\\overline{CK} = 1$ ($CK = 0$). Together, the Master and Slave stages form a positive- or negative-edge-triggered non-inverting D-flip-flop (since two inversions cancel out: $\\text{Inv}_1 \\rightarrow \\text{Inv}_2$).\n3. **Feedback Inverter (final inverter, $\\text{Inv}_3$):** Provides the net logic inversion required for toggling. If the output of $\\text{Inv}_2$ is considered $Q$, then the output of $\\text{Inv}_3$ is $\\overline{Q}$, which is wired directly back to the input $D$.\n\n---\n\n### 2. Step-by-Step Operation\n\nLet us label the three inverters from left to right as $\\text{Inv}_1$, $\\text{Inv}_2$, and $\\text{Inv}_3$, and let $V_{\\text{out}}$ be the feedback node at the output of $\\text{Inv}_3$. \n\nAssume initially that the input of $\\text{Inv}_2$ holds a logic **`0`**, which means the output of $\\text{Inv}_2$ is **`1`** and the feedback node $V_{\\text{out}}$ is **`0`**.\n\n* **Phase 1 ($CK = \\text{High}, \\overline{CK} = \\text{Low}$):**\n  * The $CK$ switch **closes** and the $\\overline{CK}$ switch **opens**.\n  * Because the $\\overline{CK}$ switch is open, $\\text{Inv}_2$ and $\\text{Inv}_3$ are isolated from the first stage; the parasitic input capacitance of $\\text{Inv}_2$ retains its logic **`0`**, keeping $V_{\\text{out}} = \\mathbf{0}$.\n  * Meanwhile, this $V_{\\text{out}} = \\mathbf{0}$ passes through the closed $CK$ switch to the input of $\\text{Inv}_1$, driving the output of $\\text{Inv}_1$ to **`1`**.\n\n* **Phase 2 ($CK = \\text{Low}, \\overline{CK} = \\text{High}$):**\n  * The $CK$ switch **opens** and the $\\overline{CK}$ switch **closes**.\n  * The input capacitance of $\\text{Inv}_1$ dynamically holds the **`0`** sampled in Phase 1, so the output of $\\text{Inv}_1$ stays securely at **`1`**.\n  * This **`1`** passes through the closed $\\overline{CK}$ switch to the input of $\\text{Inv}_2$.\n  * Consequently, the output of $\\text{Inv}_2$ falls to **`0`**, and the output of $\\text{Inv}_3$ ($V_{\\text{out}}$) transitions from **`0` to `1`**.\n  * Because the $CK$ switch is currently open, this new **`1`** waits at the input of the $CK$ switch until the next clock cycle.\n\n* **Phase 3 (Next $CK = \\text{High}, \\overline{CK} = \\text{Low}$):**\n  * The $CK$ switch closes again, sampling the new $V_{\\text{out}} = \\mathbf{1}$ into $\\text{Inv}_1$ (making $\\text{Inv}_1$'s output **`0`**), while the $\\overline{CK}$ switch opens to keep $V_{\\text{out}} = \\mathbf{1}$ stable for the remainder of the half-cycle.\n\n* **Phase 4 (Next $CK = \\text{Low}, \\overline{CK} = \\text{High}$):**\n  * The **`0`** at the output of $\\text{Inv}_1$ passes through the $\\overline{CK}$ switch, driving $\\text{Inv}_2$'s output to **`1`** and toggling $V_{\\text{out}}$ back from **`1` to `0`**.\n\n---\n\n### 3. Summary Table of States\n\n| Clock Cycle | Phase | $CK$ Switch | $\\overline{CK}$ Switch | Input of $\\text{Inv}_1$ | Output of $\\text{Inv}_1$ | Input of $\\text{Inv}_2$ | Output of $\\text{Inv}_2$ ($Q$) | Feedback Node ($V_{\\text{out}} = \\overline{Q}$) |\n| :--- | :--- | :---: | :---: | :---: | :---: | :---: | :---: | :---: |\n| **Cycle 1** | $CK = 1, \\overline{CK} = 0$ | Closed | Open | `0` | `1` | `0` *(held)* | `1` | **`0`** |\n| **Cycle 1** | $CK = 0, \\overline{CK} = 1$ | Open | Closed | `0` *(held)* | `1` | `1` | `0` | **`1`** *(toggles)* |\n| **Cycle 2** | $CK = 1, \\overline{CK} = 0$ | Closed | Open | `1` | `0` | `1` *(held)* | `0` | **`1`** |\n| **Cycle 2** | $CK = 0, \\overline{CK} = 1$ | Open | Closed | `1` *(held)* | `0` | `0` | `1` | **`0`** *(toggles)* |\n\nBecause the internal nodes change state only **once per full clock period ($T_{CK}$)**, a complete oscillation cycle of the output takes **two clock periods ($2T_{CK}$)**:\n\n$$f_{\\text{out}} = \\frac{1}{2} f_{CK}$$\n\n---\n\n### 4. Key Practical Considerations\n\n1. **Dynamic Memory (Minimum Clock Frequency):**\n   When a switch opens, the logic level is stored dynamically as charge on the parasitic gate capacitance of the following inverter. If the clock frequency $f_{CK}$ is too low, subthreshold and junction leakage currents will discharge the floating nodes, causing the circuit to lose its state.\n2. **Maximum Operating Frequency:**\n   For reliable operation, the clock half-period ($T_{CK}/2$) must exceed the worst-case propagation delay of the active path:\n   * During $CK = 1$: the signal must propagate through the $CK$ switch and $\\text{Inv}_1$.\n   * During $\\overline{CK} = 1$: the signal must propagate through the $\\overline{CK}$ switch, $\\text{Inv}_2$, and $\\text{Inv}_3$. Since this path contains two inverters in series, it typically sets the upper frequency limit:\n     $$\\frac{T_{CK}}{2} > t_{d,\\text{switch}} + t_{p,\\text{Inv2}} + t_{p,\\text{Inv3}}$$\n3. **Non-Overlapping Clocks:**\n   If $CK$ and $\\overline{CK}$ overlap (both switches closed simultaneously during clock transitions) for a duration longer than the propagation delay around the loop, the circuit momentarily becomes a free-running 3-stage ring oscillator, leading to race-through errors.",
        "format": "markdown",
        "sha256": "a52c372895894dececa2b3bf05a5f8e1e7449cabe3257d97343a3f963d0ea1db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic divide-by-two and explains that clocked sampling and feedback toggle the output at half the clock frequency. The golden solution explicitly awards full credit for this identification; internal path details are secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1132,
        "output_tokens": 4049,
        "total_tokens": 5181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2268,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1132,
        "output_tokens": 4049,
        "total_tokens": 5181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2268,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The arrangement shown in the figure is a **dynamic divide-by-2 frequency divider** (also understood as a **dynamic Master-Slave Toggle Flip-Flop** or a **clock-synchronized ring oscillator**). \n\nHere is a comprehensive analysis of how it works from both a digital logic and an analog/circuit perspective.\n\n---\n\n### 1. Structural Breakdown\n\nThe circuit consists of a closed loop containing:\n* **Three Inverters:** An odd number of inverters in a loop provides a net logical inversion. Let us label the second and third inverters as $\\text{Inv}_2$ and $\\text{Inv}_3$.\n* **Two Complementary Switches:** Controlled by a clock ($CK$) and its logical complement ($\\overline{CK}$). \n  * When $CK = 1$ (High), the $CK$ switch is **closed** and the $\\overline{CK}$ switch is **open**.\n  * When $CK = 0$ (Low), the $CK$ switch is **open** and the $\\overline{CK}$ switch is **closed**.\n* **Implicit Storage (Parasitic Capacitance):** When a switch opens, the logic level (voltage) is temporarily held on the input gate capacitance of the inverter immediately following that switch.\n\n---\n\n### 2. Step-by-Step Operation\n\nTo see how the circuit divides the clock frequency in half, let’s trace the logic levels at two key points:\n* **Node $A$:** The output of $\\text{Inv}_1$ (before the $\\overline{CK}$ switch).\n* **Node $B$:** The output of the third inverter, $\\text{Inv}_3$ (which loops back to the $CK$ switch).\n\n*(Note: Because $\\text{Inv}_2$ and $\\text{Inv}_3$ are connected in series, they act together as a **non-inverting buffer**).*\n\n#### **Initial State: Clock Cycle 1 ($CK = 1, \\overline{CK} = 0$)**\n1. The $\\overline{CK}$ switch is **open**, isolating $\\text{Inv}_2$ from $\\text{Inv}_1$. Assume the input capacitance of $\\text{Inv}_2$ is currently holding a logic **`0`**.\n2. Passing through the two inverters ($\\text{Inv}_2$ and $\\text{Inv}_3$), the output at **Node $B$ is `0`**.\n3. Because the $CK$ switch is **closed**, this `0` is fed into the input of $\\text{Inv}_1$.\n4. $\\text{Inv}_1$ inverts the signal, making **Node $A = 1$**. This `1` waits at the open $\\overline{CK}$ switch.\n\n#### **Half-Cycle 1: $CK$ goes Low ($CK = 0, \\overline{CK} = 1$)**\n1. The $CK$ switch **opens**. The input capacitance of $\\text{Inv}_1$ holds the previous `0`, so **Node $A$ remains `1`**.\n2. The $\\overline{CK}$ switch **closes**. The `1` at Node $A$ now passes into the input of $\\text{Inv}_2$.\n3. After propagating through $\\text{Inv}_2$ and $\\text{Inv}_3$, **Node $B$ changes from `0` to `1`**. This `1` waits at the open $CK$ switch.\n\n#### **Clock Cycle 2: $CK$ goes High ($CK = 1, \\overline{CK} = 0$)**\n1. The $\\overline{CK}$ switch **opens**. The input capacitance of $\\text{Inv}_2$ holds the `1`, so **Node $B$ remains `1`**.\n2. The $CK$ switch **closes**. The `1` from Node $B$ enters $\\text{Inv}_1$.\n3. $\\text{Inv}_1$ inverts the signal, so **Node $A$ changes from `1` to `0`**.\n\n#### **Half-Cycle 2: $CK$ goes Low ($CK = 0, \\overline{CK} = 1$)**\n1. The $CK$ switch **opens**. $\\text{Inv}_1$ holds its input `1`, keeping **Node $A$ at `0`**.\n2. The $\\overline{CK}$ switch **closes**. The `0` from Node $A$ passes through $\\text{Inv}_2$ and $\\text{Inv}_3$, causing **Node $B$ to change from `1` to `0`**.\n\n---\n\n### 3. Summary Table of States\n\n| Clock Phase | Switch $CK$ | Switch $\\overline{CK}$ | Input to $\\text{Inv}_1$ | Output of $\\text{Inv}_1$ (Node $A$) | Input to $\\text{Inv}_2$ | Output of Loop (Node $B$) |\n| :--- | :---: | :---: | :---: | :---: | :---: | :---: |\n| **1. $CK = 1$** | Closed | Open | `0` | **`1`** | `0` *(held)* | **`0`** |\n| **2. $CK = 0$** | Open | Closed | `0` *(held)* | **`1`** | `1` | **`1`** |\n| **3. $CK = 1$** | Closed | Open | `1` | **`0`** | `1` *(held)* | **`1`** |\n| **4. $CK = 0$** | Open | Closed | `1` *(held)* | **`0`** | `0` | **`0`** |\n\n**Conclusion:** It takes **four clock phases (two full periods of $CK$)** for the internal nodes ($A$ and $B$) to go from `0` $\\to$ `1` $\\to$ `0` (one full output period). Therefore:\n$$f_{\\text{out}} = \\frac{1}{2} f_{CK}$$\n\n---\n\n### 4. Two Intuitive Ways to View This Circuit\n\n1. **The Digital Logic View (Master-Slave Flip-Flop):**\n   * **Master Latch:** The $CK$ switch + $\\text{Inv}_1$ acts as a dynamic inverting D-latch.\n   * **Slave Latch:** The $\\overline{CK}$ switch + $\\text{Inv}_2$ acts as a second dynamic inverting D-latch. Together in series, the Master and Slave form a non-inverting **edge-triggered D Flip-Flop**.\n   * **Inverting Feedback:** The third inverter ($\\text{Inv}_3$) inverts the output $Q$ of the flip-flop to produce $\\overline{Q}$ and feeds it back to the input $D$. Connecting $D = \\overline{Q}$ is the classic configuration for a **Toggle Flip-Flop (divide-by-2)**.\n\n2. **The Analog/Oscillator View (Gated Ring Oscillator):**\n   * Without the switches, three inverters connected in a loop form a classic **Ring Oscillator** that self-oscillates freely at a frequency determined solely by the propagation delay of the inverters ($f = \\frac{1}{6t_d}$).\n   * Adding the two out-of-phase switches breaks the continuous loop so it can never free-run. Instead, the switches act like a \"turnstile\" or an escapement mechanism in a mechanical watch, allowing the logic transition to advance through the ring only at the pace dictated by the external clock $CK$.\n\n---\n\n### 5. Practical Design Limitations\n\nBecause this is a **dynamic circuit** (relying on parasitic capacitance rather than cross-coupled latches to hold states), it has three important operational constraints:\n1. **Minimum Clock Frequency ($f_{\\min}$):** If the clock runs too slowly or stops, the charge stored on the inverter inputs will leak away, corrupting the logic state.\n2. **Maximum Clock Frequency ($f_{\\max}$):** The clock half-period must be longer than the propagation delay of the two inverters ($\\text{Inv}_2$ and $\\text{Inv}_3$) plus the RC time constant of the switch; otherwise, the signal will not settle before the switch opens.\n3. **Non-Overlapping Clocks:** If $CK$ and $\\overline{CK}$ are both momentarily closed at the same time during transitions, the loop closes entirely and acts as an asynchronous ring oscillator, causing a race condition (state corruption).",
        "format": "markdown",
        "sha256": "5bf5dafee91100b48cdb3ec68e8ee0f25b994bd3f423435f36aab5b47932de5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a dynamic divide-by-two using clocked dynamic latches; further operational detail is not required for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1132,
        "output_tokens": 4244,
        "total_tokens": 5376,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2425,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1132,
        "output_tokens": 4244,
        "total_tokens": 5376,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2425,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The arrangement shown in the figure is a **dynamic divide-by-2 frequency divider** (also understood as a **dynamic master-slave toggle flip-flop** or a **clocked ring oscillator**). \n\nHere is a complete analysis of its structure, operation, and practical characteristics.\n\n---\n\n### 1. Structural Breakdown\nThe circuit consists of three logic inverters connected in a closed feedback loop, interrupted by two complementary switches controlled by a clock ($CK$) and its inverse ($\\overline{CK}$):\n\n1. **Master Stage ($\\text{Switch } CK + \\text{Inv}_1$):** \n   * Acts as a dynamic inverting sample-and-hold latch. When $CK$ is closed, it samples the feedback signal; when $CK$ opens, the **parasitic input capacitance** of $\\text{Inv}_1$ dynamically stores the logic state.\n2. **Slave Stage ($\\text{Switch } \\overline{CK} + \\text{Inv}_2 + \\text{Inv}_3$):** \n   * The two cascaded inverters ($\\text{Inv}_2$ and $\\text{Inv}_3$) together form a **non-inverting buffer**. When $\\overline{CK}$ opens, the input capacitance of $\\text{Inv}_2$ dynamically holds the logic level passed from $\\text{Inv}_1$.\n3. **Overall Topology:** \n   * Because the two switches operate on opposite phases of the clock, the feedback loop is **never fully closed at any instant**. Instead, the signal is stepped around the loop one half-cycle at a time. Since there are three inversions in total (an odd number), the signal inverts every time it completes a full trip around the loop.\n\n---\n\n### 2. Step-by-Step Operational Analysis\n\nTo trace the logic states, let us define the key nodes:\n* **$X$**: Output of $\\text{Inv}_1$ (before switch $\\overline{CK}$)\n* **$Y$**: Output of the rightmost inverter, $\\text{Inv}_3$ (fed back to switch $CK$)\n\n*(Convention: A switch is **closed** when its control signal is HIGH (`1`) and **open** when LOW (`0`).)*\n\n#### **Initial State (Assume $CK = 0, \\overline{CK} = 1$):**\n* Switch $CK$ is **open**; Switch $\\overline{CK}$ is **closed**.\n* Assume the input of $\\text{Inv}_1$ is holding a logic `0` on its gate capacitance.\n* Therefore, the output of $\\text{Inv}_1$ is **$X = 1$**.\n* Since switch $\\overline{CK}$ is closed, this `1` passes through the two cascaded inverters ($\\text{Inv}_2$ and $\\text{Inv}_3$):\n  $$\\text{Input of Inv}_2 = 1 \\implies \\text{Output of Inv}_2 = 0 \\implies \\mathbf{Y = 1}$$\n\n---\n\n#### **Phase 1: $CK$ goes HIGH ($CK = 1, \\overline{CK} = 0$)**\n1. **Switch $\\overline{CK}$ opens:** The input capacitance of $\\text{Inv}_2$ holds its previous state (`1`), so the final output remains fixed at **$Y = 1$**.\n2. **Switch $CK$ closes:** The value **$Y = 1$** is fed back into the input of $\\text{Inv}_1$.\n3. $\\text{Inv}_1$ inverts this `1`, changing its output to **$X = 0$** (which now waits just before the open $\\overline{CK}$ switch).\n\n#### **Phase 2: $CK$ goes LOW ($CK = 0, \\overline{CK} = 1$)**\n1. **Switch $CK$ opens:** The input capacitance of $\\text{Inv}_1$ holds the `1`, keeping **$X = 0$**.\n2. **Switch $\\overline{CK}$ closes:** The value **$X = 0$** passes into $\\text{Inv}_2$.\n3. After propagating through both $\\text{Inv}_2$ and $\\text{Inv}_3$, the final output changes to **$Y = 0$** (which now waits before the open $CK$ switch).\n\n#### **Phase 3: $CK$ goes HIGH ($CK = 1, \\overline{CK} = 0$)**\n1. **Switch $\\overline{CK}$ opens:** The input of $\\text{Inv}_2$ holds `0`, keeping **$Y = 0$**.\n2. **Switch $CK$ closes:** The value **$Y = 0$** is fed into the input of $\\text{Inv}_1$.\n3. $\\text{Inv}_1$ inverts this `0`, changing its output back to **$X = 1$**.\n\n#### **Phase 4: $CK$ goes LOW ($CK = 0, \\overline{CK} = 1$)**\n1. **Switch $CK$ opens:** The input of $\\text{Inv}_1$ holds `0`, keeping **$X = 1$**.\n2. **Switch $\\overline{CK}$ closes:** The `1` propagates through $\\text{Inv}_2$ and $\\text{Inv}_3$, returning the output to **$Y = 1$**.\n\n---\n\n### 3. Summary Table & Frequency Division\n\n| Clock Cycle | Clock Phase | Input of $\\text{Inv}_1$ | Output of $\\text{Inv}_1$ ($X$) | Output of Loop ($Y$) |\n| :--- | :--- | :---: | :---: | :---: |\n| **Cycle 0** | $CK = 0, \\overline{CK} = 1$ | `0` (held) | `1` | `1` |\n| **Cycle 1** | $CK = 1, \\overline{CK} = 0$ | `1` (sampled) | `0` | `1` (held) |\n| **Cycle 1** | $CK = 0, \\overline{CK} = 1$ | `1` (held) | `0` | `0` (updated) |\n| **Cycle 2** | $CK = 1, \\overline{CK} = 0$ | `0` (sampled) | `1` | `0` (held) |\n| **Cycle 2** | $CK = 0, \\overline{CK} = 1$ | `0` (held) | `1` | `1` (updated) |\n\n* **Result:** The outputs $X$ and $Y$ toggle their state only **once per full clock period** ($T_{CK}$). Therefore, it takes **two full clock periods** ($2T_{CK}$) for the circuit signals to complete one full oscillation cycle:\n  $$f_{\\text{out}} = \\frac{f_{CK}}{2}$$\n\n---\n\n### 4. Practical Design Considerations\n\n1. **Dynamic Memory (Minimum Clock Frequency):**\n   Because the logic states are stored dynamically as charge on the parasitic gate capacitances of the inverters when the switches are open, the circuit cannot be clocked too slowly. If $f_{CK}$ is too low, leakage currents through the switches will corrupt the stored voltages.\n2. **Maximum Clock Frequency:**\n   In each half-cycle, the signal must fully propagate through the closed switch and the corresponding inverter stage(s). The slave path ($\\overline{CK} \\rightarrow \\text{Inv}_2 \\rightarrow \\text{Inv}_3$) has two inverter delays plus the switch $RC$ delay, which sets the upper limit on $f_{CK}$:\n   $$\\frac{T_{CK}}{2} > t_{p,\\text{switch}} + t_{p,\\text{Inv2}} + t_{p,\\text{Inv3}}$$\n3. **Non-Overlapping Clocks Required:**\n   If $CK$ and $\\overline{CK}$ overlap (both switches closed simultaneously during transitions), the circuit momentarily forms an unbroken 3-stage ring oscillator, causing race conditions (shoot-through of data) and failure to divide properly.",
        "format": "markdown",
        "sha256": "5e5df11c92f90ce33f0f3e0a1e76456a5ec836d82627dcb3a73e15d783ab246c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic divide-by-two/master-slave divider and explains dynamic storage and half-rate operation. Extra topology details are not required by the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1132,
        "output_tokens": 3755,
        "total_tokens": 4887,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1132,
        "output_tokens": 3755,
        "total_tokens": 4887,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The base circuit (in black) is a **dynamic divide-by-2 frequency divider** (a master–slave dynamic toggle flip-flop) formed by a clocked loop of three inverters. \n\nAdding the **red inverter** across the $CK$ switch and $\\text{Inv}_1$ creates a continuous, unclocked feedforward path around the master stage. Its impact on performance depends on the phase of the clock and the operating frequency:\n\n---\n\n### 1. Higher Maximum Operating Frequency ($f_{\\max}$) — *Speed Advantage*\n* **Bypasses the $CK$ Switch Delay:** Because the input of the red inverter is connected *before* the $CK$ switch, the feedback signal from the output of the last inverter does not have to wait for the $CK$ switch to close—nor does it suffer from the RC delay (ON-resistance) of the $CK$ switch—before beginning to drive the output of $\\text{Inv}_1$.\n* **Parallel Drive Strength ($CK = 1, \\overline{CK} = 0$):** When $CK$ is high (closed), the red inverter and $\\text{Inv}_1$ are in parallel with identical inputs. Their combined transconductance drives the intermediate node (before $\\overline{CK}$) faster than $\\text{Inv}_1$ could alone.\n* **Pre-Transitioning Near $f_{\\max}$:** At very high clock frequencies, the signal propagating through $\\overline{CK}$ and the two right-hand inverters arrives at the feedback node right as $\\overline{CK}$ is turning off and $CK$ is turning on. The red inverter gives the output of $\\text{Inv}_1$ a \"head start,\" boosting the maximum toggle frequency ($f_{\\max}$).\n\n---\n\n### 2. Signal Contention and Increased Power Consumption ($CK = 0, \\overline{CK} = 1$)\n* When $CK$ goes low (open) and $\\overline{CK}$ goes high (closed), the input of $\\text{Inv}_1$ dynamically holds the *old* logic state, so $\\text{Inv}_1$ continues driving its output to a fixed level.\n* After a delay of two inverters (through the right-hand stages), the feedback wire toggles to the *new* logic state while $CK$ is still open.\n* At this point, the red inverter and $\\text{Inv}_1$ have **opposite inputs** while their outputs are tied together. They **fight (contend) with each other**, creating a direct DC/crowbar current path from $V_{DD}$ to ground for the remainder of the $CK = 0$ half-cycle, which **increases power dissipation** and degrades the logic level at the output of $\\text{Inv}_1$.\n\n---\n\n### 3. Race Condition / Low-Frequency Failure (Higher $f_{\\min}$)\n* While $\\overline{CK} = 1$ ($CK = 0$), the red inverter and the two right-hand black inverters form a closed **3-inverter ring oscillator loop**.\n* **If the red inverter is strong (comparable to or larger than $\\text{Inv}_1$):** It will overpower or corrupt the output of $\\text{Inv}_1$ while $\\overline{CK}$ is still closed. At lower clock frequencies (where the half-period $T_{CK}/2$ is longer than the delay of the two right-hand inverters), the loop will oscillate multiple times during $\\overline{CK} = 1$, destroying the divide-by-2 functionality.\n* **If the red inverter is weak (smaller than $\\text{Inv}_1$):** $\\text{Inv}_1$ dominates when $CK = 0$, preventing free-running oscillation, though it still pulls the node slightly toward the switching threshold (acting like a hybrid dynamic / injection-locked divider) and narrows the voltage margin at low frequencies.\n\n---\n\n### 4. Extra Capacitive Loading\n* The red inverter adds **input (gate) capacitance** to the output of the third black inverter and **output (drain) capacitance** to the output of $\\text{Inv}_1$. If the red inverter is not sized carefully, this added parasitic capacitance partially offsets the speed gain during the $\\overline{CK} = 1$ phase.\n\n---\n\n### Summary Table\n\n| Performance Metric | Effect of the Red Inverter | Reason |\n| :--- | :--- | :--- |\n| **Max Speed ($f_{\\max}$)** | **Improves (Increases)** | Bypasses $CK$ switch RC delay; drives the internal node in parallel with $\\text{Inv}_1$. |\n| **Min Speed ($f_{\\min}$)** | **Degrades (Increases)** | Forms an active 3-inverter ring when $\\overline{CK}=1$, causing race conditions/oscillation if the clock period is too long. |\n| **Power Consumption** | **Increases** | Static contention (fighting) between the red inverter and $\\text{Inv}_1$ when $CK = 0$. |\n| **Noise Margin** | **Degrades** | Voltage division between fighting inverters corrupts the logic level at the output of $\\text{Inv}_1$ during $CK = 0$. |",
        "format": "markdown",
        "sha256": "41c52741cf254dfdcc8fc383d0ce13329f8453b5a49783c02eced5da48616587"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the unclocked feedforward path bypassing the CK switch and Inv1, its high-speed benefit, and the low-frequency ring/ contention that raises the minimum usable clock frequency. Additional loading and sizing details are secondary and do not change the central conclusion.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 7340,
        "total_tokens": 8451,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 7340,
        "total_tokens": 8451,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The base circuit (in black) is a **single-ended dynamic divide-by-2 frequency divider**. It consists of a master sample-and-hold stage ($CK$ and $\\text{Inv}_1$) followed by a slave stage ($\\overline{CK}$ and two cascaded inverters) so that the total loop contains an odd number of inversions (three).\n\nAdding the **red inverter** in parallel with the master switch $CK$ and $\\text{Inv}_1$ creates a continuous, unclocked feedforward path around the first stage. This affects the circuit's performance in several key ways:\n\n---\n\n### 1. Increases Maximum Operating Frequency ($f_{\\text{max}}$)\n* **Bypasses the $CK$ Switch Delay:** In the original circuit, the feedback signal from the rightmost inverter must wait for $CK$ to turn on and must charge/discharge the input capacitance of $\\text{Inv}_1$ through the on-resistance ($R_{\\text{on}}$) of switch $CK$. The red inverter bypasses switch $CK$ entirely, allowing the signal to start driving the output of $\\text{Inv}_1$ immediately as soon as the feedback node transitions.\n* **Parallel Drive Strength ($CK = 1$):** When $CK$ is closed, the red inverter and $\\text{Inv}_1$ have the same input and drive the same output node in parallel, increasing the effective transconductance/drive current and speeding up the transition.\n* **Injection-Locked Ring Oscillator Behavior:** At very high frequencies, the red inverter nudges the circuit to behave like a 3-stage ring oscillator that is periodically synchronized (injection-locked) by the clock switches, extending the maximum operating speed.\n\n---\n\n### 2. Degrades Low-Frequency Operation (Increases $f_{\\text{min}}$)\n* **State Corruption & Self-Oscillation ($CK = 0, \\overline{CK} = 1$):** \n  When $CK$ is open and $\\overline{CK}$ is closed, the input of $\\text{Inv}_1$ dynamically holds the *previous* logic state (say, `0`), so $\\text{Inv}_1$ holds its output at `1`. Once this `1` propagates through $\\overline{CK}$ and the two right-hand inverters, the feedback node flips to `1`. \n* Without the red inverter, the open $CK$ switch blocks this new `1` until the next half-cycle. **With the red inverter**, this new `1` immediately feeds through to pull the output of $\\text{Inv}_1$ toward `0` while $\\overline{CK}$ is still closed.\n* If the clock frequency is too low (i.e., the $\\overline{CK} = 1$ phase is longer than the propagation delay of the three inverters), the red inverter and the two right-hand inverters form an active **3-stage ring oscillator**, overwriting the stored state and causing unwanted self-oscillation. Thus, the circuit has a much higher minimum operating frequency ($f_{\\text{min}}$).\n\n---\n\n### 3. Increases Power Consumption and Contention\n* **Driver Fighting (Crowbar Current):** During the second part of the $CK = 0, \\overline{CK} = 1$ phase (after the feedback node has flipped), the input of $\\text{Inv}_1$ holds the *old* state while the input of the red inverter sees the *new* (opposite) state. Because their outputs are tied together, one inverter pulls up to $V_{DD}$ while the other pulls down to ground.\n* **Degraded Logic Levels:** This direct contention draws static short-circuit current—increasing power dissipation—and degrades the voltage swing (noise margin) at the input of the $\\overline{CK}$ switch unless the red inverter is sized to be weak relative to $\\text{Inv}_1$.\n\n---\n\n### Summary Table\n\n| Performance Metric | Effect of the Red Inverter | Reason |\n| :--- | :--- | :--- |\n| **Max Speed ($f_{\\text{max}}$)** | **Improves (Increases)** | Bypasses $CK$ switch resistance/wait-time and adds parallel drive when $CK=1$. |\n| **Min Speed ($f_{\\text{min}}$)** | **Worsens (Increases)** | Forms a 3-inverter ring oscillator when $\\overline{CK}=1$, corrupting the held state at low speeds. |\n| **Power Dissipation** | **Worsens (Increases)** | Creates contention (fighting) between $\\text{Inv}_1$ and the red inverter when $CK=0$. |\n| **Voltage Swing / Noise Margin** | **Degrades** | Contention during $CK=0$ prevents full rail-to-rail swing at the output of $\\text{Inv}_1$. |",
        "format": "markdown",
        "sha256": "aa402cfbe68cd7317c88dd6ab4395c11db191b398963566c742f03d2a0912b90"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the red inverter’s feedforward bypass and speed benefit, and explains that its unclocked regenerative path can corrupt division at low clock rates, raising the minimum usable frequency. The additional contention and power discussion is consistent with the described mechanism.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 5916,
        "total_tokens": 7027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 5916,
        "total_tokens": 7027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The base circuit (shown in black) is a **dynamic divide-by-2 frequency divider**. It consists of a master stage (switch $CK$ and $\\text{Inv}_1$) and a slave stage (switch $\\overline{CK}$ and two cascaded inverters) connected in a global negative-feedback loop (three inversions total).\n\nAdding the **red inverter** places a continuous-time **feedforward (bypass) path** in parallel with the switched master stage ($CK + \\text{Inv}_1$). This affects the circuit's performance in four main ways:\n\n---\n\n### 1. Increases Maximum Operating Frequency ($f_{\\max}$) — *Primary Benefit*\n* **Bypasses the $CK$ Switch Delay:** In the original circuit, when $CK$ turns on, the feedback signal from the rightmost inverter must propagate through the on-resistance of the $CK$ switch (charging/discharging the input capacitance of $\\text{Inv}_1$) and then through $\\text{Inv}_1$. The red inverter bypasses the $CK$ switch entirely.\n* **Look-Ahead (Pre-Driving) Action:** During the phase when $CK$ is open ($0$) and $\\overline{CK}$ is closed ($1$), as soon as the new state finishes propagating through the two rightmost inverters to the feedback line, the red inverter **immediately starts slewing the output of $\\text{Inv}_1$** toward its next state—even *before* $CK$ closes.\n* **Parallel Drive:** Once $CK$ closes, $\\text{Inv}_1$ and the red inverter share the same input and output nodes, working in parallel to drive the intermediate node faster.\n\n---\n\n### 2. Causes Contention and Increases Power Consumption — *Drawback*\n* When $CK$ is open ($0$) and $\\overline{CK}$ is closed ($1$), the input capacitance of $\\text{Inv}_1$ holds the *previous* logic state (say, `0`), so $\\text{Inv}_1$ actively drives its output to `1`.\n* Once that `1` propagates through the $\\overline{CK}$ switch and the two rightmost inverters, the feedback line transitions to `1`. \n* At this point, while $CK$ is still open, **$\\text{Inv}_1$ has `0` at its input while the red inverter has `1` at its input**. The two inverters fight each other (contention/crowbar current) until $CK$ closes, burning static power and degrading the voltage swing at the output of $\\text{Inv}_1$.\n\n---\n\n### 3. Limits Low-Frequency Operation (Increases $f_{\\min}$ / Race Condition) — *Drawback*\n* Notice that when $\\overline{CK}$ is closed, the **red inverter and the two rightmost inverters form a 3-stage ring oscillator loop**.\n* If the clock frequency is too low (meaning $\\overline{CK}$ stays closed for too long) or if the red inverter is sized too strongly relative to $\\text{Inv}_1$, the red inverter will overpower $\\text{Inv}_1$ and flip the intermediate node *while $\\overline{CK}$ is still closed*. \n* This creates a **race-through condition** (or unwanted self-oscillation during the $\\overline{CK}=1$ phase), corrupting the stored state and causing the divider to fail at low frequencies.\n\n---\n\n### 4. Adds Parasitic Capacitive Loading\n* The gate capacitance of the red inverter permanently loads the output of the last inverter, and its drain capacitance permanently loads the output of $\\text{Inv}_1$. \n\n---\n\n### Summary of Design Trade-off\nTo get a net performance improvement, the red inverter must be **sized weaker than $\\text{Inv}_1$**. When properly sized, it acts like a gentle look-ahead / injection-locking path that **boosts high-frequency speed ($f_{\\max}$)** at the expense of **higher power dissipation** and a **higher minimum operating frequency ($f_{\\min}$)**.",
        "format": "markdown",
        "sha256": "8a9955aff706317fa7d99f33ad3c4e9d88cfd5f9e0b3e12b85d0ab060b60aa65"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the red inverter’s feedforward bypass and speed benefit, and explains that its unclocked regenerative path can overpower the first latch at low clock rates, raising the minimum usable frequency. The added contention and loading details do not contradict the essential tradeoff.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 6410,
        "total_tokens": 7521,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1111,
        "output_tokens": 6410,
        "total_tokens": 7521,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I do not agree with that answer.** The quoted explanation is a common misconception (or AI pattern-matching error) that confuses this wiring with an antiparallel keeper latch.\n\nHere is why that answer is incorrect, followed by what the red inverter actually does in this circuit.\n\n---\n\n### 1. Why the Red Inverter is *Not* a Keeper Latch\n\nIn the base circuit (black), the loop forms a classic **dynamic master–slave divide-by-2 circuit**:\n* **Master stage:** Switch $CK$ followed by $\\text{Inv}_1$ (1 inversion).\n* **Slave stage:** Switch $\\overline{CK}$ followed by two cascaded inverters (2 inversions, acting as a non-inverting delay buffer).\n\nAt low clock frequencies, the dynamic storage node—the floating gate capacitance **between switch $CK$ and $\\text{Inv}_1$**—loses its charge due to leakage when $CK = 0$. \n\nFor the red inverter to act as a **keeper (staticizer)** with $\\text{Inv}_1$:\n1. **It must point in the opposite direction (right-to-left):** A cross-coupled latch requires **positive feedback** (an even number of inversions, i.e., two inverters connected back-to-back: output of $\\text{Inv}_1$ to input of the keeper, and output of the keeper back to the input of $\\text{Inv}_1$). Here, the red inverter points **left-to-right**—the *same* direction as $\\text{Inv}_1$—shorting their outputs together.\n2. **It must connect to the internal storage node (after switch $CK$):** Here, the red inverter connects to the wire **before** switch $CK$. When switch $CK$ is open, the input of $\\text{Inv}_1$ is still completely isolated and floating, so leaked charge on $\\text{Inv}_1$'s input is never replenished.\n\n---\n\n### 2. What the Red Inverter Actually Does\n\nAs drawn, the red inverter is placed directly **in parallel with the entire master stage ($\\text{Switch } CK + \\text{Inv}_1$)**, bypassing the master isolation switch $CK$. \n\nLet’s trace its actual effect across both phases of the clock:\n\n#### **Phase 1: $CK = 1, \\overline{CK} = 0$ (Master Sampling / Slave Hold)**\n* Switch $CK$ is **closed** and switch $\\overline{CK}$ is **open**.\n* Both $\\text{Inv}_1$ and the red inverter have their inputs tied to the bottom feedback wire and their outputs tied together before switch $\\overline{CK}$.\n* **Role:** The red inverter simply operates **in parallel with $\\text{Inv}_1$**, effectively increasing the drive strength (width) of the first inverter stage while $CK = 1$.\n\n#### **Phase 2: $CK = 0, \\overline{CK} = 1$ (Master Hold / Slave Transparent)**\n* Switch $CK$ **opens** (so $\\text{Inv}_1$'s input holds the previously sampled value, say $0$, meaning $\\text{Inv}_1$ drives its output to $1$), and switch $\\overline{CK}$ **closes**.\n* The logic $1$ at the output of $\\text{Inv}_1$ passes through the closed switch $\\overline{CK}$ and ripples through the two slave inverters on the right. Because there are **two** inverters in the slave stage, the bottom feedback wire transitions to the **same** logic level ($1$) after two inverter delays.\n* Normally, switch $CK$ being open blocks this new $1$ on the bottom wire from affecting the master stage until the next clock edge.\n* **However, the red inverter bypasses the open switch $CK$!** It takes the new $1$ on the bottom wire and immediately tries to drive the output of $\\text{Inv}_1$ to **$0$**—directly opposing $\\text{Inv}_1$!\n* Look at the active loop when $\\overline{CK} = 1$:\n  $$\\text{Red Inverter} \\longrightarrow \\text{Switch }\\overline{CK}\\text{ (closed)} \\longrightarrow \\text{Inv}_2 \\longrightarrow \\text{Inv}_3 \\longrightarrow \\text{Red Inverter}$$\n  This forms a closed loop of **three inverters in series** (**negative feedback**, not positive feedback).\n\n#### **Net Result on Circuit Operation:**\nDepending on the sizing (strength) of the red inverter relative to $\\text{Inv}_1$:\n1. **If the red inverter is weak compared to $\\text{Inv}_1$:** \n   During $CK = 0$, $\\text{Inv}_1$ overpowers the red inverter, but the two inverters **fight each other (signal contention)**. This causes static crowbar current, degrades the logic swing at the input of the slave stage, and actually **worsens** low-frequency performance (as soon as $\\text{Inv}_1$'s floating input weakens due to leakage, the red inverter flips the node to the wrong state).\n2. **If the red inverter is comparable to or stronger than $\\text{Inv}_1$:** \n   It destroys the master–slave edge-triggered isolation. Whenever $\\overline{CK} = 1$, the red inverter overrides $\\text{Inv}_1$, causing the signal to race through and turning the loop into a **free-running 3-stage ring oscillator** during the $\\overline{CK} = 1$ half-cycle, breaking the divide-by-2 functionality.\n\n---\n\n### Summary: How it *Should* Be Drawn for a Keeper\n\nIf the original intention of the diagram was to create a pseudo-static keeper latch with $\\text{Inv}_1$ (as well as the slave stage), the red inverter must be **reversed** and connected **inside** the switch:\n\n```text\n                  Keeper (weak, pointing LEFT)\n                    +------|<o------+\n                    |               |\n         CK         v     Inv1      |     /CK\n   -----o  o--------+---->|>o-------+----o  o---->|>o---->|>o----+\n   |                                                             |\n   +-------------------------------------------------------------+\n```",
        "format": "markdown",
        "sha256": "b9aa5759805fd43b056e24c8cc808d0a5dd1def6854f54a2f7a13f9574851cda"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as a feedforward path bypassing CK that can fight the intended latch behavior at low rates. However, it overstates that the loop necessarily breaks division and does not clearly state the high-speed benefit of pre-driving the node.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1158,
        "output_tokens": 18098,
        "total_tokens": 19256,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16761,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1158,
        "output_tokens": 18098,
        "total_tokens": 19256,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16761,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I do not agree with that answer.** Both claims in the quoted explanation are fundamentally incorrect.\n\n---\n\n### 1. Why the Quoted Answer is Wrong\n\n1. **It does not form a cross-coupled latch (keeper):**\n   * A keeper inverter must be connected in **antiparallel** (pointing from right to left, with its input at the output of $\\text{Inv}_1$ and its output feeding back to the input of $\\text{Inv}_1$) to create a positive-feedback bistable loop.\n   * Here, the red inverter points in the **same direction** (left to right) as $\\text{Inv}_1$, with both outputs tied together. \n2. **It does not prevent leakage at the dynamic node:**\n   * The left terminal of the red inverter is connected *before* the $CK$ switch, not to the dynamic storage node between the $CK$ switch and $\\text{Inv}_1$. When the $CK$ switch is open, the input of $\\text{Inv}_1$ remains completely floating.\n3. **It actually worsens (increases) the minimum clock frequency requirement:**\n   * Rather than helping at low frequencies, the red inverter causes **signal contention** with $\\text{Inv}_1$ when the $CK$ switch is open, which can corrupt the stored state if the clock is too slow.\n\n---\n\n### 2. What the Circuit Is and the Actual Role of the Red Inverter\n\n#### The Base Circuit (Black)\nThe black circuit is a **single-ended dynamic divide-by-2 frequency divider**:\n* The master stage consists of the $CK$ switch and $\\text{Inv}_1$.\n* The slave stage consists of the $\\overline{CK}$ switch and the two right-hand inverters (two inverters are needed in the slave stage so the total loop has an odd number of inversions—three—giving the negative feedback required to toggle every clock cycle).\n\n#### The Role of the Red Inverter: A Look-Ahead / Speed-Up Path\nThe red inverter is placed **in parallel with the series combination of the $CK$ switch and $\\text{Inv}_1$** to **increase the maximum operating frequency ($f_{\\text{max}}$)** of the divider:\n\n1. **Bypassing the $CK$ Switch Delay:**\n   In the base circuit, when $CK$ goes high, the feedback signal from the slave output must pass through the series on-resistance ($R_{\\text{on}}$) of the $CK$ switch before reaching $\\text{Inv}_1$. The red inverter's input is connected directly to the feedback line ahead of the switch, bypassing the switch's $RC$ delay.\n2. **Pre-Driving (Look-Ahead) Before $CK$ Turns On:**\n   During the phase when $CK = 0$ (open) and $\\overline{CK} = 1$ (closed), the signal propagates through the $\\overline{CK}$ switch and the two slave inverters to the feedback wire on the far left. \n   * Without the red inverter, the signal sits idle at the left of the $CK$ switch until $CK$ goes high.\n   * With the red inverter, as soon as the slave output updates, the red inverter **immediately begins slewing the output of $\\text{Inv}_1$ toward its next state**, even before $CK$ turns on.\n3. **Parallel Drive Strength When $CK$ Turns On:**\n   Once $CK$ closes, $\\text{Inv}_1$ and the red inverter receive the exact same input and work in parallel to drive the output node, reducing the propagation delay.\n\n---\n\n### 3. The Trade-Off (Why It Contends with $\\text{Inv}_1$)\n\nWhile $CK = 0$ and $\\overline{CK} = 1$:\n* The floating input of $\\text{Inv}_1$ holds the *previous* logic value, so $\\text{Inv}_1$ tries to keep its output constant.\n* Once the new value propagates through the two slave inverters to the feedback line, the red inverter sees the *new* logic value and tries to flip the output of $\\text{Inv}_1$ in the opposite direction.\n\nThis creates a **contention (fighting) condition** between the red inverter and $\\text{Inv}_1$:\n* **At high clock frequencies (near $f_{\\text{max}}$):** The propagation delay through the $\\overline{CK}$ switch and the two slave inverters takes up almost the entire half-clock period. By the time the red inverter starts pulling the output of $\\text{Inv}_1$, $\\overline{CK}$ is already turning off and $CK$ is turning on, so the early transition acts as a helpful look-ahead speed boost.\n* **At low clock frequencies:** If $\\overline{CK}$ stays closed for too long and the red inverter is strong enough to overpower $\\text{Inv}_1$, the loop formed by the red inverter and the two slave inverters becomes an active **3-stage ring oscillator**, causing the divider to fail at low frequencies (effectively transitioning the circuit from a dynamic logic divider toward an injection-locked ring-oscillator divider).",
        "format": "markdown",
        "sha256": "d6f2fb2c261c0fab37b58d766032d74de07ad325600c956d30dac0ac63b34391"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as an unclocked feedforward path that bypasses part of the latch path. It captures both the high-speed benefit and the low-frequency contention/ring behavior that raises the minimum usable clock rate; the extra timing details do not change the essential answer.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1158,
        "output_tokens": 9965,
        "total_tokens": 11123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8866,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1158,
        "output_tokens": 9965,
        "total_tokens": 11123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8866,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I do not agree with that answer.** The quoted explanation is a classic misconception (often generated by AI tools or hasty visual inspection) that assumes any inverter drawn above another inverter is a back-to-back keeper.\n\nIf you trace the direction and node connections of the red inverter carefully, it **cannot** act as a keeper for $\\text{Inv}_1$, and in fact, it has the **exact opposite effect** at low clock frequencies.\n\n---\n\n### 1. Why the Quoted Answer is Incorrect\n\nTo form a **keeper (cross-coupled latch)** with $\\text{Inv}_1$ that prevents charge leakage at low clock frequencies, two topological conditions must be met—and this circuit violates both:\n\n1. **Wrong Direction (Parallel, Not Cross-Coupled):**\n   * A cross-coupled latch requires two inverters connected **antiparallel (back-to-back)** in a positive-feedback loop: the output of $\\text{Inv}_1$ must drive the input of the keeper, and the output of the keeper must drive the input of $\\text{Inv}_1$.\n   * In the figure, **both the red inverter and $\\text{Inv}_1$ point from left to right**. Their outputs are tied together at the same node. They are connected in **parallel (feedforward)**, not in a local feedback loop.\n\n2. **Wrong Node Connection (Outside the $CK$ Switch):**\n   * The dynamic storage node that suffers from charge leakage when $CK = 0$ (switch open) is the node **between the $CK$ switch and the input of $\\text{Inv}_1$**.\n   * The left terminal of the red inverter is connected to the **left of the $CK$ switch**. When $CK = 0$, the input of $\\text{Inv}_1$ is completely isolated from the red inverter, so the red inverter cannot replenish leaked charge on $\\text{Inv}_1$'s gate.\n\n---\n\n### 2. Circuit Analysis: What Does the Red Inverter Actually Do?\n\nFirst, look at the **black circuit** by itself:\n* It consists of two oppositely phased switches ($CK$ and $\\overline{CK}$) and **three inverters** in a single closed loop.\n* This is a standard **single-ended dynamic divide-by-2 frequency divider** (a dynamic master–slave toggle flip-flop, where the master stage is $[CK + \\text{Inv}_1]$, the slave stage is $[\\overline{CK} + \\text{Inv}_2]$, and the third inverter $\\text{Inv}_3$ provides the extra inversion needed to feed $\\overline{Q}$ back to $D$).\n\nNow, let's trace what happens during the two clock phases when the **red inverter** is placed in parallel with the $[CK + \\text{Inv}_1]$ branch:\n* Let **Node A** be the wire to the left of switch $CK$ (the output of the rightmost inverter).\n* Let **Node B** be the wire at the output of $\\text{Inv}_1$ (to the left of switch $\\overline{CK}$).\n\n#### Phase 1: $CK = 1, \\overline{CK} = 0$ (Master Transparent, Slave Holding)\n* Switch $CK$ is closed and switch $\\overline{CK}$ is open.\n* Both $\\text{Inv}_1$ and the red inverter share the exact same input (Node A) and drive the exact same output (Node B) to $\\overline{V_A}$.\n* However, because the red inverter **bypasses the series $CK$ switch**, it does not suffer from the $RC$ delay of the switch and immediately begins driving Node B as soon as Node A transitions.\n\n#### Phase 2: $CK = 0, \\overline{CK} = 1$ (Master Holding, Slave Transparent)\n* Switch $CK$ opens, trapping the previous logic level (say, $A_0$) on the input capacitance of $\\text{Inv}_1$. Thus, $\\text{Inv}_1$ tries to hold Node B at $\\overline{A_0}$.\n* Simultaneously, switch $\\overline{CK}$ closes. The voltage at Node B ($\\overline{A_0}$) propagates through the two black inverters on the right. Because two inverters in series are **non-inverting**, Node A transitions to $\\overline{A_0}$ after two inverter delays ($t_{d,\\text{slave}}$).\n* **Here is the critical behavior:** Once Node A reaches $\\overline{A_0}$, the input of the red inverter is now $\\overline{A_0}$, so the red inverter tries to drive Node B to $\\overline{\\overline{A_0}} = A_0$—the **exact opposite** of the logic level ($\\overline{A_0}$) that $\\text{Inv}_1$ is trying to hold!\n* Notice the closed loop formed when $\\overline{CK} = 1$:\n  $$\\text{Node B} \\xrightarrow{\\overline{CK}=1} \\text{Inv}_2 \\longrightarrow \\text{Inv}_3 \\longrightarrow \\text{Node A} \\longrightarrow \\text{Red Inverter} \\longrightarrow \\text{Node B}$$\n  This loop contains **three inverters** (negative DC feedback), which forms a **3-stage ring oscillator**.\n\n---\n\n### 3. The Actual Role (and Trade-offs) of the Red Inverter\n\nDepending on the context of the problem, there are two ways to interpret the role of the red inverter:\n\n#### A. High-Speed Feedforward Bypass / Injection-Locked Ring Operation\nIf the circuit is intentionally designed as drawn (with a weak red inverter relative to $\\text{Inv}_1$):\n1. **Increases Maximum Operating Frequency ($f_{\\max}$):** At very high clock frequencies—where the half-clock period ($T_{CK}/2$) is roughly equal to the propagation delay through $\\overline{CK}$ and the two right-hand inverters—the signal arriving at Node A at the end of the $\\overline{CK}=1$ phase **bypasses the $CK$ switch** through the red inverter and begins pre-slewing Node B toward its next logic state even before $CK$ fully closes.\n2. **Quasi-Ring / Injection-Locked Divider Behavior:** The red inverter + the two right-hand inverters act as a 3-stage ring oscillator gated by $\\overline{CK}$, while $\\text{Inv}_1$ periodically injects/forces the sampled state during $CK=1$.\n3. **Degrades Low-Frequency Operation (Worsens $f_{\\min}$):** If the clock frequency is too low ($T_{CK}/2 \\gg t_{d,\\text{slave}}$), the red inverter fights $\\text{Inv}_1$ (static contention) during the second half of the $CK=0$ phase. If the red inverter overpowers $\\text{Inv}_1$ (or as soon as $\\text{Inv}_1$'s floating input leaks), the loop will self-oscillate at the 3-inverter ring frequency while $\\overline{CK}=1$, destroying divide-by-2 operation.\n\n#### B. A \"Spot the Bug\" / Misdrawn Keeper Question\nIf this figure comes from an IC design interview question asking *\"Why doesn't this red inverter work as a keeper?\"*, the answer is:\n* Instead of keeping the state of $\\text{Inv}_1$ when $CK = 0$, the red inverter creates a **contention path and a 3-inverter ring oscillator** that actively tries to **overwrite** $\\text{Inv}_1$'s output with the inverted state once the signal propagates through the $\\overline{CK}$ path.\n* To actually serve as a keeper for $\\text{Inv}_1$, the red inverter would need to be **flipped right-to-left** and connected **to the right of the $CK$ switch** (directly across the input and output of $\\text{Inv}_1$).",
        "format": "markdown",
        "sha256": "59d86ae22f5e3696e20d41178d6e5b2e7bb94937887f5f1b7936d273b7a6b3c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as an unclocked feedforward path that bypasses the CK switch and Inv1. It also captures the high-speed benefit and low-frequency contention/ring behavior that can corrupt division and raise the minimum usable clock rate.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1158,
        "output_tokens": 23818,
        "total_tokens": 24976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22121,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1158,
        "output_tokens": 23818,
        "total_tokens": 24976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22121,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **self-biased complementary CMOS resistive-feedback low-noise amplifier (LNA)** (an inverter-based LNA utilizing current reuse). \n\nTo see how to optimize its Noise Figure ($\\text{NF}$) while keeping the input resistance fixed at $R_{\\text{in}} = R_S = 50\\ \\Omega$, we first write the governing small-signal equations for $R_{\\text{in}}$, voltage gain ($A_v$), and noise factor ($F$).\n\n---\n\n### 1. Governing Equations\n\nLet the total transconductance and total output resistance of the complementary pair be:\n$$G_m = g_{m1} + g_{m2}, \\qquad r_O = r_{O1} \\parallel r_{O2}$$\n\n1. **Input Resistance ($R_{\\text{in}}$):**\n   $$R_{\\text{in}} = \\frac{R_F + r_O}{1 + G_m r_O} \\approx \\frac{1}{G_m}\\left(1 + \\frac{R_F}{r_O}\\right)$$\n\n2. **Voltage Gain ($A_v$) under Input Matching ($R_{\\text{in}} = R_S$):**\n   Because the MOSFET gates draw no low-frequency current, all input current $i_{\\text{in}} = v_X / R_{\\text{in}}$ flows through $R_F$. When matched ($R_{\\text{in}} = R_S$, so the gate node voltage is $v_X = \\frac{1}{2}v_{\\text{in}}$), the overall voltage gain from the source to the output is:\n   $$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{1}{2}\\left(1 - \\frac{R_F}{R_S}\\right)$$\n\n3. **Noise Factor ($F$) under Input Matching ($R_{\\text{in}} = R_S$):**\n   Summing the output noise contributions from the source resistance ($R_S$), the channel thermal noise of $M_1$ and $M_2$ ($\\overline{i_{n,M}^2} = 4kT\\gamma G_m$), and the thermal noise of $R_F$ ($\\overline{v_{n,RF}^2} = 4kTR_F$), the noise factor is:\n   $$F = 1 + \\underbrace{\\frac{\\gamma G_m}{R_S \\left(G_m + \\frac{1}{r_O}\\right)^2} \\left(\\frac{R_F + R_S}{R_F - R_S}\\right)^2}_{\\text{Contribution of } M_1, M_2} + \\underbrace{\\frac{R_F R_S}{(R_F - R_S)^2}\\left(\\frac{G_m + \\frac{1}{R_S}}{G_m + \\frac{1}{r_O}}\\right)^2}_{\\text{Contribution of } R_F}$$\n\n   For $G_m r_O \\gg 1$, this simplifies to:\n   $$F \\approx 1 + \\frac{\\gamma}{G_m R_S} \\left(\\frac{R_F + R_S}{R_F - R_S}\\right)^2 + \\frac{R_F R_S}{(R_F - R_S)^2}\\left(1 + \\frac{1}{G_m R_S}\\right)^2$$\n\n---\n\n### 2. How to Optimize for Minimum NF with $R_{\\text{in}} = 50\\ \\Omega$\n\n#### Case A: Simplified Model (Neglecting Channel-Length Modulation, $r_O \\to \\infty$)\nIf $r_O \\to \\infty$, then $R_{\\text{in}} = \\frac{1}{G_m} = R_S = 50\\ \\Omega$, which fixes $G_m = 20\\text{ mS}$ ($G_m R_S = 1$). The noise factor becomes:\n$$F = 1 + \\gamma \\left(\\frac{R_F + R_S}{R_F - R_S}\\right)^2 + \\frac{4 R_F R_S}{(R_F - R_S)^2}$$\n\n* **Optimization:** Since $G_m$ is fixed by the $50\\ \\Omega$ match, the only free parameter is **$R_F$**. We **make $R_F$ as large as possible** ($R_F \\gg R_S$). Increasing $R_F$ monotonically reduces both the $R_F$ noise term (which falls off as $\\approx 4R_S/R_F$) and the transistor noise factor $\\left(\\frac{R_F+R_S}{R_F-R_S}\\right)^2$ (which approaches $1$), driving $F$ toward $1 + \\gamma$ while increasing the voltage gain $|A_v|$.\n\n---\n\n#### Case B: Realistic Model (Accounting for Finite $r_O$)\nIn actual deep-submicron CMOS, $r_O$ is finite and relatively small. The matching condition $R_{\\text{in}} = R_S = 50\\ \\Omega$ requires:\n$$R_F + r_O = R_S (1 + G_m r_O) \\implies R_F = R_S(1 + G_m r_O) - r_O$$\n\nThis unlocks a much stronger optimization strategy that lowers $F$ well below $1 + \\gamma$:\n\n1. **Simultaneously Increase $G_m$ and $R_F$:**\n   * **Scale up the transistor widths ($W_1, W_2$) and DC bias current ($I_D$):** This **increases $G_m$** and **decreases $r_O$** by the same factor, keeping the intrinsic gain $G_m r_O$ constant.\n   * **Increase $R_F$ accordingly:** Since $R_F + r_O = R_S(1 + G_m r_O)$ must remain constant to preserve $R_{\\text{in}} = 50\\ \\Omega$, a smaller $r_O$ allows (and requires) a **larger $R_F$**.\n   * **Double Benefit for NF:** Looking at the Noise Factor equation, **increasing $G_m$** and **increasing $R_F$** both push $F$ down simultaneously:\n     * The transistor noise term drops because $G_m R_S$ in the denominator increases *and* $\\left(\\frac{R_F + R_S}{R_F - R_S}\\right)^2$ decreases.\n     * The feedback resistor noise term drops because $\\frac{R_F R_S}{(R_F - R_S)^2}$ decreases *and* $\\left(1 + \\frac{1}{G_m R_S}\\right)^2$ decreases.\n\n2. **Maximize the Intrinsic Gain ($G_m r_O$):**\n   * Because $R_F = R_S(1 + G_m r_O) - r_O$, the maximum usable $R_F$ while maintaining $R_{\\text{in}} = 50\\ \\Omega$ is bounded by $R_{F,\\max} < R_S(1 + G_m r_O)$.\n   * Operating the transistors with a smaller overdrive voltage ($V_{GS} - V_{TH}$) or slightly longer channel length increases $G_m r_O$, permitting a larger $R_F$ for a given $R_{\\text{in}} = 50\\ \\Omega$.\n\n3. **Properly Ratio $W_2 / W_1$ for Self-Biasing:**\n   * Choose $W_2 / W_1$ so the DC quiescent voltage at the input/output sits near $V_{DD}/2$, keeping both $M_1$ and $M_2$ safely in saturation (preventing $r_O$ degradation in the triode region).\n\n---\n\n### 3. Practical Limits on the Optimization\n\nYou cannot scale $G_m$ (via $W$ and $I_D$) and $R_F$ indefinitely due to two main constraints:\n1. **Power Dissipation:** Increasing $G_m$ requires a proportional increase in the DC bias current $I_D$ from $V_{DD}$.\n2. **Input Capacitance & Bandwidth ($S_{11}$ degradation):** Scaling up $W_1$ and $W_2$ increases the parasitic gate capacitances $C_{gs}$ and $C_{gd}$ (with $C_{gd}$ further multiplied by the Miller effect as $|A_v|$ grows with $R_F$). Eventually, the input impedance becomes overly capacitive at the operating frequency, degrading input return loss ($|S_{11}|$) and limiting the $-3\\text{ dB}$ bandwidth.",
        "format": "markdown",
        "sha256": "b8f2f0a59d316f7ae8d398222a02c8f4d54f59c126c21d1f271ce3b1031014df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Uses the finite-output-resistance matching relation and explains that gm can be increased with RF adjusted to keep Rin at 50 Ω, allowing NF below 1 + γ. This satisfies the golden solution’s full-credit rule; the additional implementation details do not change the essential conclusion.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 17220,
        "total_tokens": 18369,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 17220,
        "total_tokens": 18369,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **self-biased CMOS inverter resistive-feedback low-noise amplifier (LNA)** (a current-reuse topology analyzed in B. Razavi’s *RF Microelectronics*, Chapter 5). Because $M_1$ and $M_2$ share the same bias current and amplify the input signal in parallel, the effective transconductance is $G_m = g_{m1} + g_{m2}$.\n\nHow you optimize this circuit for Noise Figure ($\\text{NF}$) while holding $R_{\\text{in}} = R_S = 50\\ \\Omega$ depends on whether channel-length modulation ($r_{o1}, r_{o2}$) is neglected or included:\n\n---\n\n### 1. Ideal Case: Neglecting Channel-Length Modulation ($r_{o1}, r_{o2} \\to \\infty$)\n\nWhen the transistor output resistances are very large ($r_{o1} \\parallel r_{o2} \\gg R_F$), all of the input current flowing through $R_F$ must be absorbed by the drain transconductance sources of $M_1$ and $M_2$:\n\n1. **Input Resistance:**\n   $$R_{\\text{in}} = \\frac{1}{g_{m1} + g_{m2}}$$\n   To maintain $R_{\\text{in}} = R_S = 50\\ \\Omega$, the total transconductance is **fixed**:\n   $$g_{m1} + g_{m2} = \\frac{1}{R_S} = 20\\text{ mS}$$\n\n2. **Voltage Gain:**\n   $$A_v = 1 - (g_{m1} + g_{m2})R_F = 1 - \\frac{R_F}{R_S}$$\n\n3. **Noise Figure ($\\text{NF}$):**\n   Summing the noise contributions from $R_S$, $R_F$, and the channel thermal noise of $M_1$ and $M_2$ yields:\n   $$F = 1 + \\underbrace{\\frac{4 R_F / R_S}{\\left[1 - (g_{m1} + g_{m2})R_F\\right]^2}}_{\\text{Due to } R_F} + \\underbrace{\\frac{\\gamma (g_{m1} + g_{m2}) R_S (1 + R_F / R_S)^2}{\\left[1 - (g_{m1} + g_{m2})R_F\\right]^2}}_{\\text{Due to } M_1 \\text{ and } M_2}$$\n   Substituting $(g_{m1} + g_{m2})R_S = 1$ simplifies this to:\n   $$F = 1 + \\frac{4 R_F R_S}{(R_F - R_S)^2} + \\gamma \\left(\\frac{R_F + R_S}{R_F - R_S}\\right)^2$$\n\n* **Optimization Strategy:** \n  Because $g_{m1} + g_{m2}$ is fixed at $20\\text{ mS}$ by the $50\\ \\Omega$ matching condition, **$R_F$ is the only free parameter**. Both noise terms decrease monotonically as $R_F$ increases. Therefore, **make $R_F$ as large as possible** ($R_F \\gg R_S$), which increases the voltage gain magnitude $|A_v|$ and reduces $F$ toward its theoretical asymptote of $1 + \\gamma$.\n\n---\n\n### 2. Practical Case: Including Finite Output Resistance ($R_o = r_{o1} \\parallel r_{o2} < \\infty$)\n\nIn short-channel CMOS processes, $R_o = r_{o1} \\parallel r_{o2}$ is relatively small and cannot be ignored. Taking $R_o$ into account changes the input resistance to:\n\n$$R_{\\text{in}} = \\frac{R_F + R_o}{1 + (g_{m1} + g_{m2})R_o} = R_S = 50\\ \\Omega$$\n\nHere, $R_{\\text{in}}$ is a function of **both** $R_F$ and $G_m = g_{m1} + g_{m2}$, which unlocks an important degree of freedom:\n\n* **Optimization Strategy:**\n  We can **simultaneously increase $R_F$ and increase $g_{m1} + g_{m2}$** (by scaling up the transistor widths $W_1, W_2$ and bias current $I_D$) such that the ratio $\\frac{R_F + R_o}{1 + (g_{m1} + g_{m2})R_o}$ remains locked at $50\\ \\Omega$, i.e.,\n  $$g_{m1} + g_{m2} = \\frac{1}{R_S}\\left(1 + \\frac{R_F - R_S}{R_o}\\right)$$\n  * **Why this improves $\\text{NF}$:** Increasing $g_{m1} + g_{m2}$ beyond $1/R_S$ directly reduces the input-referred thermal noise voltage of the transistors ($\\overline{V_{n,M}^2} = \\frac{4kT\\gamma}{g_{m1}+g_{m2}}$), while simultaneously increasing $R_F$ reduces the thermal noise current injected by the feedback resistor ($\\overline{I_{n,RF}^2} = \\frac{4kT}{R_F}$). This allows the circuit to achieve a noise figure even lower than the $1 + \\gamma$ limit, at the expense of higher DC power consumption.\n\n---\n\n### 3. Practical Limits on How Far $R_F$ (and $G_m$) Can Be Increased\n\nIn practice, you cannot increase $R_F$ and transistor widths indefinitely due to four constraints:\n1. **Input Return Loss ($S_{11}$) and Bandwidth:** Increasing $R_F$ increases the voltage gain magnitude $|A_v| = \\frac{R_F}{R_S} - 1$, which increases the Miller-multiplied gate-drain capacitance $(1 - A_v)(C_{gd1} + C_{gd2})$ at the input. Scaling up transistor widths also increases $C_{gs1} + C_{gs2}$. Together, this larger input capacitance degrades $S_{11}$ (making $\\left|Z_{\\text{in}}\\right| \\neq 50\\ \\Omega$) at high frequencies.\n2. **Intrinsic Gain Upper Bound:** For a given technology with intrinsic gain $A_0 = (g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$, setting $R_{\\text{in}} = R_S$ requires $R_F < (1 + A_0)R_S$. If $R_F$ exceeds this value, $R_{\\text{in}} = 50\\ \\Omega$ cannot be maintained no matter how large the transistors are made.\n3. **Linearity ($P_{1\\text{dB}}$ and $\\text{IIP}_3$):** Higher $R_F$ leads to higher voltage gain, causing larger voltage swings at the output node and driving $M_1$ and $M_2$ out of saturation earlier.\n4. **Power Dissipation:** Increasing $g_{m1} + g_{m2}$ to compensate for a larger $R_F$ requires proportionally higher DC bias current from $V_{DD}$.",
        "format": "markdown",
        "sha256": "1aa85175b77776aa14eb39003035d3c027fcb7d1bf45d83d921ba18ceba03dac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly uses the finite-output-resistance input-match relation and explains that increasing gm while adjusting RF to keep Rin at 50 Ω lets gm exceed 1/Rs and reduces NF below 1 + gamma. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 16622,
        "total_tokens": 17771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14959,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 16622,
        "total_tokens": 17771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14959,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **self-biased CMOS inverter with resistive shunt feedback**, commonly used as a wideband **Low-Noise Amplifier (LNA)**. Because both the NMOS ($M_1$) and PMOS ($M_2$) are driven by the input, the circuit exploits **current reuse**, achieving an effective transconductance of $G_m = g_{m1} + g_{m2}$ from a single DC bias current.\n\nTo optimize this circuit for Noise Figure ($\\text{NF}$) while maintaining an input match of $R_{\\text{in}} = R_S = 50\\ \\Omega$, we analyze the circuit in two steps: first neglecting channel-length modulation ($r_o \\to \\infty$), and then including the finite output resistance $r_o = r_{o1} \\parallel r_{o2}$.\n\n---\n\n### 1. First-Order Optimization (Neglecting $r_o$, or $R_F \\ll r_{o1} \\parallel r_{o2}$)\n\n#### **Input Resistance and Gain**\nIf the transistor output resistances are very large ($r_{o1} \\parallel r_{o2} \\to \\infty$), all current flowing through $R_F$ must be absorbed by the transistor transconductances. The input resistance is therefore independent of $R_F$:\n$$R_{\\text{in}} = \\frac{1}{g_{m1} + g_{m2}}$$\n\nTo maintain $R_{\\text{in}} = R_S = 50\\ \\Omega$, the total transconductance is fixed at:\n$$g_{m1} + g_{m2} = \\frac{1}{R_S} = \\frac{1}{50\\ \\Omega} = 20\\text{ mS}$$\n\nUnder this input-matched condition, the voltage gain from the antenna source ($R_S$) to the output is:\n$$A_v = \\frac{1}{2}\\left(1 - \\frac{R_F}{R_S}\\right)$$\n\n#### **Noise Figure ($\\text{NF}$)**\nAccounting for the thermal noise of $R_S$, the feedback resistor $R_F$, and the channel thermal noise of $M_1$ and $M_2$ ($\\overline{i_{n,d}^2} = 4kT\\gamma(g_{m1} + g_{m2})$), the noise factor $F$ is:\n$$F = 1 + \\frac{4 R_S R_F}{(R_F - R_S)^2} + \\gamma \\left(\\frac{R_F + R_S}{R_F - R_S}\\right)^2$$\n\nFor $R_F \\gg R_S$, this simplifies to:\n$$F \\approx 1 + \\frac{4R_S}{R_F} + \\gamma$$\n\n#### **Optimization Strategy (Case 1):**\n* **Fix $g_{m1} + g_{m2} = 20\\text{ mS}$** to keep $R_{\\text{in}} = 50\\ \\Omega$.\n* **Make $R_F$ as large as possible ($R_F \\gg R_S$):**\n  1. It directly suppresses the noise contribution of $R_F$ (the $\\frac{4R_S}{R_F}$ term approaches $0$).\n  2. It reduces the transistor noise multiplier $\\left(\\frac{R_F + R_S}{R_F - R_S}\\right)^2$ toward unity.\n  3. It increases the voltage gain $|A_v|$, which suppresses the input-referred noise of subsequent receiver stages.\n  4. Because the MOSFET gates draw no DC current, increasing $R_F$ does **not** disturb the DC self-biasing point ($V_{\\text{out,DC}} = V_{\\text{in,DC}}$).\n\n---\n\n### 2. Exact Optimization (Including Finite $r_o = r_{o1} \\parallel r_{o2}$)\n\nIn deep-submicron CMOS processes, $r_o = r_{o1} \\parallel r_{o2}$ is relatively low and comparable to $R_F$. Including $r_o$ unlocks an additional degree of freedom to push the $\\text{NF}$ even lower.\n\n#### **Input Resistance and Matching Constraint**\nWith finite $r_o$, the input resistance is:\n$$R_{\\text{in}} = \\frac{R_F + r_o}{1 + (g_{m1} + g_{m2})r_o} \\approx \\frac{1 + R_F / r_o}{g_{m1} + g_{m2}}$$\n\nTo keep $R_{\\text{in}} = R_S = 50\\ \\Omega$, $g_{m1} + g_{m2}$ and $R_F$ must satisfy:\n$$(g_{m1} + g_{m2})R_S \\approx 1 + \\frac{R_F}{r_o}$$\n\n#### **Noise Figure with Finite $r_o$**\nUsing short-circuit output noise currents under the exact matching condition ($R_{\\text{in}} = R_S$) and assuming $(g_{m1} + g_{m2})R_F \\gg 1$ and $R_F \\gg R_S$, the noise factor becomes:\n$$F \\approx 1 + \\frac{\\gamma}{(g_{m1} + g_{m2})R_S} + \\frac{R_S}{R_F}\\left[1 + \\frac{1}{(g_{m1} + g_{m2})R_S}\\right]^2$$\n\nSubstituting $(g_{m1} + g_{m2})R_S = 1 + \\frac{R_F}{r_o}$:\n$$F \\approx 1 + \\frac{\\gamma}{1 + R_F / r_o} + \\frac{R_S}{R_F}\\left(1 + \\frac{1}{1 + R_F / r_o}\\right)^2$$\n\n#### **Optimization Strategy (Case 2):**\nUnlike the idealized case where $g_{m1} + g_{m2}$ was locked to $1/R_S$, here we can make $(g_{m1} + g_{m2})R_S > 1$:\n1. **Increase $g_{m1} + g_{m2}$ well above $1/R_S$ ($20\\text{ mS}$)** by increasing the transistor aspect ratios ($W/L$) and bias current $I_D$.\n2. **Simultaneously increase $R_F$** according to:\n   $$R_F = (r_{o1} \\parallel r_{o2})\\left[(g_{m1} + g_{m2})R_S - 1\\right]$$\n   so that $R_{\\text{in}}$ remains constant at $50\\ \\Omega$.\n3. **Result:** Both the transistor noise term $\\frac{\\gamma}{(g_{m1} + g_{m2})R_S}$ (which drops **below $\\gamma$**) and the feedback resistor noise term $\\frac{R_S}{R_F}\\left(1 + \\frac{1}{G_m R_S}\\right)^2$ decrease simultaneously, while the voltage gain $|A_v| = \\frac{1}{2}\\left(\\frac{R_F}{R_S} - 1\\right)$ increases.\n\n---\n\n### 3. Practical Limits to the Optimization\n\nYou cannot increase $g_{m1} + g_{m2}$ and $R_F$ indefinitely due to three main trade-offs:\n1. **Bandwidth Degradation:** Increasing transistor widths ($W_1, W_2$) increases the input and output parasitic capacitances ($C_{GS}, C_{GD}, C_{DB}$). Combined with a larger $R_F$, the output pole and Miller-multiplied input capacitance $C_{GD}(1 + |A_v|)$ lower the $-3\\text{ dB}$ bandwidth and degrade the high-frequency input return loss ($S_{11}$).\n2. **Power Consumption:** Increasing $g_{m1} + g_{m2}$ requires a higher DC bias current $I_{DD}$ from $V_{DD}$.\n3. **Output Resistance Scaling:** If $g_{m1} + g_{m2}$ is increased purely by scaling up the bias current $I_D$ and device widths $W$ proportionally, $r_o \\propto 1/I_D$ decreases at the same rate, keeping the intrinsic gain $(g_{m1} + g_{m2})r_o$ roughly constant. Thus, $R_F$ should first be made as large as the bandwidth allows for a given $r_o$.",
        "format": "markdown",
        "sha256": "8f628c38eea90b0c2085baaa60b86980bbc31e054a0dedadfe7a74081cfd1900"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly uses the finite-output-resistance input-match relation and explains that gm can exceed 1/Rs by increasing RF to preserve Rin, allowing NF below 1+gamma. The recommendation to increase gm and RF together matches the essential optimization.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 19305,
        "total_tokens": 20454,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17365,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 19305,
        "total_tokens": 20454,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17365,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the input impedance of the transimpedance amplifier (TIA) shown in the figure, we first determine the low-frequency input resistance $R_{\\text{in}}$ looking into node $P$, and then combine it with the input capacitance $C_{\\text{in}}$.\n\n*(Note: In accordance with standard small-signal analysis for this topology, we first neglect channel-length modulation, i.e., $\\lambda = 0$, and provide the result including output resistances at the end).*\n\n---\n\n### **Step 1: Gain of the First Stage ($M_1$)**\nTransistor $M_1$ operates as a common-source amplifier with drain resistor $R_{D1}$. Since the gate of $M_2$ draws no low-frequency current, the small-signal voltage at node $X$ in terms of the voltage at node $P$ ($V_P$) is:\n$$V_X = -g_{m1} R_{D1} V_P$$\n\n---\n\n### **Step 2: Transconductance of the Second Stage ($M_2$ and $M_3$)**\nTransistors $M_2$ and $M_3$ form a PMOS source-coupled pair biased by an ideal tail current source $I_{SS}$:\n* $M_2$ acts as a source follower driven by $V_X$, and $M_3$ acts as a common-gate stage with its gate tied to a fixed bias voltage $V_b$ (AC ground).\n* Looking into the source of $M_3$, the small-signal resistance is $\\frac{1}{g_{m3}}$. \n* The total series resistance between the gate of $M_2$ ($V_X$) and the gate of $M_3$ (AC ground) is $\\frac{1}{g_{m2}} + \\frac{1}{g_{m3}}$.\n\n can also be seen by writing KCL at the common source node $V_S$:\n$$i_{d2} + i_{d3} = 0 \\implies g_{m2}(V_S - V_X) + g_{m3}(V_S - 0) = 0 \\implies V_S = \\frac{g_{m2}}{g_{m2} + g_{m3}} V_X$$\n\nThus, the small-signal current $i_{d3}$ flowing out of the drain of $M_3$ into the output node $V_{\\text{out}}$ is:\n$$i_{d3} = g_{m3} V_S = \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) V_X$$\n\nSubstituting $V_X = -g_{m1} R_{D1} V_P$ yields:\n$$i_{d3} = -g_{m1} R_{D1} \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) V_P$$\n\n---\n\n### **Step 3: Input Resistance $R_{\\text{in}}$ at Node $P$**\nLooking into the output stage at node $V_{\\text{out}}$ (before connecting $R_F$), the Norton equivalent consists of the current source $i_{d3}$ in parallel with $R_{D2}$. Converting this to a Thevenin equivalent gives:\n* **Open-loop unloaded voltage gain ($A_v$):**\n  $$V_{\\text{th}} = i_{d3} R_{D2} = -A_v V_P, \\quad \\text{where } A_v = g_{m1} R_{D1} R_{D2} \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right)$$\n* **Open-loop output resistance ($R_{\\text{out,open}}$):**\n  $$R_{\\text{th}} = R_{D2}$$\n\nNow, applying a test voltage $V_P$ at node $P$, the input current $I_P$ flows entirely through the feedback resistor $R_F$, which is in series with the Thevenin output resistance $R_{D2}$:\n$$I_P = \\frac{V_P - V_{\\text{th}}}{R_F + R_{\\text{th}}} = \\frac{V_P - (-A_v V_P)}{R_F + R_{D2}} = \\frac{(1 + A_v)V_P}{R_F + R_{D2}}$$\n\n *(Alternatively, writing KCL directly at $V_{\\text{out}}$: $\\frac{V_P - V_{\\text{out}}}{R_F} + i_{d3} = \\frac{V_{\\text{out}}}{R_{D2}}$ gives the exact same result).*\n\nSolving for $R_{\\text{in}} = \\frac{V_P}{I_P}$:\n$$\\boxed{R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + g_{m1} R_{D1} R_{D2} \\left(\\dfrac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right)}}$$\n\n---\n\n### **Step 4: Special Cases & Total Input Impedance $Z_{\\text{in}}(s)$**\n\n1. **Symmetric PMOS Pair ($g_{m2} = g_{m3} = g_{m2,3}$):**\n   $$R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_{m2,3} R_{D1} R_{D2}}$$\n\n2. **High Loop-Gain Approximation ($A_v \\gg 1$ and $R_F \\gg R_{D2}$):**\n   $$R_{\\text{in}} \\approx \\frac{R_F}{g_{m1} R_{D1} R_{D2} \\left(\\dfrac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right)}$$\n\n3. **Total Input Impedance (including $C_{\\text{in}}$):**\n   The total impedance seen by the input current source $I_{\\text{in}}$ is the parallel combination of $R_{\\text{in}}$ and $C_{\\text{in}}$:\n   $$\\boxed{Z_{\\text{in}}(s) = R_{\\text{in}} \\parallel \\frac{1}{s C_{\\text{in}}} = \\frac{R_{\\text{in}}}{1 + s R_{\\text{in}} C_{\\text{in}}}}$$\n   *(If transistor intrinsic capacitances are considered, $C_{\\text{in}}$ is augmented by $C_{gs1} + (1 + g_{m1}R_{D1})C_{gd1}$).*",
        "format": "markdown",
        "sha256": "13b698fc8ae172b683b8e6d45ae18cdfe834667583b9af640c3e8d3dc046fb29"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Derives the exact input resistance, including the output-side resistance: (RF + RD2)/(1 + A0). Its gain expression reduces to the golden solution’s A0 = (1/2)gm1 gm2,3 RD1 RD2 for a symmetric pair; the extra capacitance discussion does not detract.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 5670,
        "total_tokens": 6806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4143,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 5670,
        "total_tokens": 6806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4143,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the input resistance $R_{\\text{in}}$ (and the overall input impedance $Z_{\\text{in}}$), we perform a small-signal analysis of the core amplifier and the feedback network. \n\n*(Note: Channel-length modulation and body effect are neglected, i.e., $\\lambda = 0, \\gamma = 0$. If channel-length modulation is included in $M_1$, simply replace $R_{\\text{D1}}$ with $R_{\\text{D1}} \\parallel r_{o1}$.)*\n\n---\n\n### **Step 1: Analyze the Core Amplifier Stages**\n\n1. **First Stage ($M_1$ — Common-Source):**\n   Applying a small-signal test voltage $v_P$ at node $P$, the small-signal voltage at node $X$ is:\n   $$v_X = -g_{m1} R_{\\text{D1}} v_P$$\n\n2. **Second Stage ($M_2, M_3$ — PMOS Differential Pair / Source-Coupled Pair):**\n   - $M_2$ acts as a source follower driving the source of the common-gate transistor $M_3$ (whose gate is at AC ground, $v_b = 0$).\n   - Let $v_S$ be the small-signal voltage at the common source node of $M_2$ and $M_3$. Since the tail current source $I_{\\text{SS}}$ is an open circuit in small-signal analysis, KCL at the common-source node gives:\n     $$i_{d2} + i_{d3} = 0 \\implies g_{m2}(v_S - v_X) + g_{m3}(v_S - 0) = 0$$\n   - Solving for $v_S$:\n     $$v_S = \\frac{g_{m2}}{g_{m2} + g_{m3}} v_X$$\n   - The small-signal drain current exiting $M_3$ into the output node is:\n     $$i_{d3} = g_{m3} v_S = \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) v_X$$\n\n   Substituting $v_X$ from the first stage gives the short-circuit transconductance current of the core amplifier:\n   $$i_{d3} = -g_{m1} R_{\\text{D1}} \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) v_P = -G_m v_P$$\n   where $G_m = g_{m1} R_{\\text{D1}} \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right)$.\n\n---\n\n### **Step 2: Apply KCL at the Output and Input Nodes**\n\n1. **At the Input Node ($P$):**\n   Since no current enters the gate of $M_1$, the input test current $i_P$ flows entirely through the feedback resistor $R_{\\text{F}}$:\n   $$i_P = \\frac{v_P - v_{\\text{out}}}{R_{\\text{F}}} \\implies v_{\\text{out}} = v_P - i_P R_{\\text{F}}$$\n\n2. **At the Output Node ($V_{\\text{out}}$):**\n   Summing the currents entering and leaving the $V_{\\text{out}}$ node:\n   $$i_{d3} + i_P = \\frac{v_{\\text{out}}}{R_{\\text{D2}}}$$\n\n   Substitute $i_{d3} = -G_m v_P$ and $v_{\\text{out}} = v_P - i_P R_{\\text{F}}$ into the KCL equation:\n   $$-G_m v_P + i_P = \\frac{v_P - i_P R_{\\text{F}}}{R_{\\text{D2}}}$$\n\n   Multiply through by $R_{\\text{D2}}$ and group the $v_P$ and $i_P$ terms:\n   $$-G_m R_{\\text{D2}} v_P + i_P R_{\\text{D2}} = v_P - i_P R_{\\text{F}}$$\n   $$i_P (R_{\\text{F}} + R_{\\text{D2}}) = v_P (1 + G_m R_{\\text{D2}})$$\n\n---\n\n### **Step 3: Compute Input Resistance ($R_{\\text{in}}$) and Input Impedance ($Z_{\\text{in}}$)**\n\nDividing $v_P$ by $i_P$ yields the exact low-frequency input resistance looking into node $P$:\n\n$$R_{\\text{in}} = \\frac{v_P}{i_P} = \\frac{R_{\\text{F}} + R_{\\text{D2}}}{1 + g_{m1} R_{\\text{D1}} R_{\\text{D2}} \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right)}$$\n\n---\n\n### **Common Simplifications & Total Impedance**\n\n1. **Symmetric Differential Pair ($g_{m2} = g_{m3}$):**\n   If $M_2$ and $M_3$ are identical and equally biased, then $\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}} = \\frac{1}{2}g_{m2}$, which simplifies $R_{\\text{in}}$ to:\n   $$R_{\\text{in}} = \\frac{R_{\\text{F}} + R_{\\text{D2}}}{1 + \\frac{1}{2} g_{m1} g_{m2} R_{\\text{D1}} R_{\\text{D2}}}$$\n\n2. **Miller Approximation ($R_{\\text{F}} \\gg R_{\\text{D2}}$):**\n   Since the open-loop voltage gain is $A_v = -g_{m1} R_{\\text{D1}} R_{\\text{D2}} \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right)$, if $R_{\\text{D2}} \\ll R_{\\text{F}}$ and $|A_v| \\gg 1$:\n   $$R_{\\text{in}} \\approx \\frac{R_{\\text{F}}}{1 + |A_v|} \\approx \\frac{R_{\\text{F}}}{g_{m1} R_{\\text{D1}} R_{\\text{D2}} \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right)}$$\n\n3. **Total Input Impedance (including $C_{\\text{in}}$):**\n   Looking from the current source $I_{\\text{in}}$, the capacitor $C_{\\text{in}}$ is in parallel with $R_{\\text{in}}$:\n   $$Z_{\\text{in}}(s) = R_{\\text{in}} \\parallel \\frac{1}{s C_{\\text{in}}} = \\frac{R_{\\text{in}}}{1 + s R_{\\text{in}} C_{\\text{in}}}$$",
        "format": "markdown",
        "sha256": "313a09362f7edfdfa8920297ddd836fa4eafda830a0dea756612da783a8210a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer gives the exact input-resistance form, including the output-side resistance: (RF + RD2)/(1 + A0). Its symmetric-pair expression for A0 matches the golden solution; the additional approximations and capacitance discussion do not alter the essential result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 5072,
        "total_tokens": 6208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 5072,
        "total_tokens": 6208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the input impedance of the transimpedance amplifier (TIA) circuit, we first compute the low-frequency input resistance $R_{\\text{in}}$ looking into node $P$, and then include the input capacitance $C_{\\text{in}}$ to obtain the total frequency-dependent input impedance $Z_{\\text{in}}(s)$.\n\n*(Assumptions: We neglect channel-length modulation ($\\lambda = 0$) and body effect ($\\gamma = 0$) for all transistors.)*\n\n---\n\n### **Step 1: Gain of the First Stage ($M_1$)**\nApply a small-signal test voltage $V_P$ at node $P$ resulting in a test current $I_P$ flowing into node $P$. \n\nSince the gate of $M_2$ draws no low-frequency current, transistor $M_1$ operates as a simple common-source amplifier with load resistor $R_{D1}$. The small-signal voltage at node $X$ is:\n$$V_X = -g_{m1} R_{D1} V_P$$\n\n---\n\n### **Step 2: Transconductance of the Second Stage ($M_2$ and $M_3$)**\nTransistors $M_2$ and $M_3$ form a PMOS source-coupled (differential) pair biased by an ideal tail current source $I_{SS}$, with the gate of $M_3$ tied to a constant bias voltage $V_b$ (AC ground).\n\n1. **Find the common-source (tail) voltage $V_S$:**\n   Since the ideal current source $I_{SS}$ is an open circuit in the small-signal model, the sum of the small-signal currents leaving the sources of $M_2$ and $M_3$ must be zero:\n   $$g_{m2}(V_S - V_X) + g_{m3}(V_S - 0) = 0$$\n   $$V_S = \\frac{g_{m2}}{g_{m2} + g_{m3}} V_X$$\n\n2. **Find the small-signal drain current of $M_3$ ($i_{d3}$):**\n   The small-signal current $i_{d3}$ flowing out of the drain of $M_3$ toward the output node $V_{\\text{out}}$ is:\n   $$i_{d3} = g_{m3}(V_S - 0) = \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) V_X = \\left(\\frac{1}{g_{m2}} + \\frac{1}{g_{m3}}\\right)^{-1} V_X$$\n\nSubstituting $V_X = -g_{m1} R_{D1} V_P$ into this expression gives:\n$$i_{d3} = -g_{m1} R_{D1} \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) V_P$$\n\n---\n\n### **Step 3: Input Resistance $R_{\\text{in}}$**\nAt node $P$, the gate of $M_1$ draws no current, so all of the input test current $I_P$ flows through the feedback resistor $R_F$:\n$$I_P = \\frac{V_P - V_{\\text{out}}}{R_F} \\implies V_{\\text{out}} = V_P - I_P R_F$$\n\nApplying Kirchhoff's Current Law (KCL) at the output node $V_{\\text{out}}$, the sum of the feedback current $I_P$ and the drain current $i_{d3}$ flows through $R_{D2}$ to ground:\n$$I_P + i_{d3} = \\frac{V_{\\text{out}}}{R_{D2}}$$\n\nSubstitute $V_{\\text{out}}$ and $i_{d3}$ into the KCL equation:\n$$I_P - g_{m1} R_{D1} \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) V_P = \\frac{V_P - I_P R_F}{R_{D2}}$$\n\nMultiply both sides by $R_{D2}$ and group the $I_P$ and $V_P$ terms:\n$$I_P(R_F + R_{D2}) = V_P \\left[ 1 + g_{m1} R_{D1} R_{D2} \\left(\\frac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) \\right]$$\n\nSolving for $R_{\\text{in}} = \\frac{V_P}{I_P}$:\n$$\\boxed{R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + g_{m1} R_{D1} R_{D2} \\left(\\dfrac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right)} = \\frac{R_F + R_{D2}}{1 + \\dfrac{g_{m1} R_{D1} R_{D2}}{\\frac{1}{g_{m2}} + \\frac{1}{g_{m3}}}}}$$\n\n*(Note: If $M_2$ and $M_3$ are identical such that $g_{m2} = g_{m3} = g_m$, this simplifies to $R_{\\text{in}} = \\frac{R_F + R_{D2}}{1 + \\frac{1}{2} g_{m1} g_m R_{D1} R_{D2}}$.)*\n\n---\n\n### **Step 4: Total Input Impedance $Z_{\\text{in}}(s)$**\nThe total input impedance seen by the input current source $I_{\\text{in}}$ consists of the input capacitance $C_{\\text{in}}$ in parallel with $R_{\\text{in}}$:\n\n$$Z_{\\text{in}}(s) = R_{\\text{in}} \\parallel \\frac{1}{s C_{\\text{in}}} = \\frac{R_{\\text{in}}}{1 + s R_{\\text{in}} C_{\\text{in}}}$$\n\nSubstituting $R_{\\text{in}}$ yields the complete frequency-dependent input impedance:\n$$\\boxed{Z_{\\text{in}}(s) = \\frac{R_F + R_{D2}}{1 + g_{m1} R_{D1} R_{D2} \\left(\\dfrac{g_{m2} g_{m3}}{g_{m2} + g_{m3}}\\right) + s C_{\\text{in}} (R_F + R_{D2})}}$$",
        "format": "markdown",
        "sha256": "cd614eb4ad5a31a2f916dd017e9ee25b4142ece93e46306afffb683012c8a9ce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The derived input resistance matches the exact result, with the effective second-stage transconductance reducing to the required factor of one-half for matched M2 and M3. The added capacitance discussion is not needed for the question but does not undermine the correct result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 5261,
        "total_tokens": 6397,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3751,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 5261,
        "total_tokens": 6397,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3751,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the output phase noise of the VCO due to the LDO's thermal noise $S_{\\text{th}}$, we split the analysis into two parts: **(1) finding the VCO's frequency sensitivity to $V_{\\text{out}}$**, and **(2) converting the voltage noise spectrum into phase noise via narrowband FM modulation.**\n\n---\n\n### 1. Physical Mechanism: VCO Sensitivity to $V_{\\text{out}}$\n\n1. **Average Voltage at Nodes $X$ and $Y$:** \n   Because the inductors $L_1$ have negligible impedance at DC and low offset frequencies ($\\Delta \\omega$), the average (low-frequency) voltage at the oscillator output nodes $X$ and $Y$ is equal to the LDO output voltage, $V_{\\text{out}}$.\n\n2. **Varactor Bias Modulation:** \n   The gates of the MOS varactors $M_{\\text{v1}}$ and $M_{\\text{v2}}$ are connected to nodes $X$ and $Y$, while their source/drain terminals are tied to the control voltage $V_{\\text{cont}}$. Therefore, the average gate-to-channel bias voltage across each varactor is:\n   $$V_{\\text{var}} = V_{\\text{out}} - V_{\\text{cont}}$$\n\n3. **Supply Pushing Equals $K_{\\text{VCO}}$:** \n   Because $V_{\\text{out}}$ and $V_{\\text{cont}}$ appear symmetrically in $V_{\\text{var}}$, any low-frequency fluctuation on $V_{\\text{out}}$ modulates the varactor capacitance by the exact same amount (with opposite sign) as an equal fluctuation on $V_{\\text{cont}}$. Thus, the VCO frequency sensitivity with respect to $V_{\\text{out}}$ has the same magnitude as the VCO gain $K_{\\text{VCO}}$:\n   $$\\left| \\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{out}}} \\right| = \\left| \\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{cont}}} \\right| = K_{\\text{VCO}} \\quad (\\text{in rad}\\cdot\\text{s}^{-1}/\\text{V})$$\n\n*(Note: If the LDO output impedance drops at higher offset frequencies due to an output decoupling capacitor, $S_{\\text{th}}(\\Delta \\omega)$ is evaluated at the offset frequency of interest $\\Delta \\omega = 2\\pi \\Delta f$.)*\n\n---\n\n### 2. Computing the Output Phase Noise\n\nSince frequency is the time derivative of phase, small-signal frequency modulation by the LDO noise $v_{n,\\text{LDO}}(t)$ integrates to produce excess phase $\\phi(t)$:\n$$\\Delta \\omega_{\\text{osc}}(t) = K_{\\text{VCO}} \\, v_{n,\\text{LDO}}(t) \\implies \\phi(t) = K_{\\text{VCO}} \\int v_{n,\\text{LDO}}(t)\\,dt$$\n\nIn the frequency domain (at an offset frequency $\\Delta \\omega$ from the carrier $\\omega_0$), the transfer function from $V_{\\text{out}}$ to output phase $\\Phi$ is:\n$$\\frac{\\Phi}{V_{\\text{out}}}(s) = \\frac{K_{\\text{VCO}}}{s} \\implies \\left| \\frac{\\Phi}{V_{\\text{out}}}(j\\Delta \\omega) \\right|^2 = \\frac{K_{\\text{VCO}}^2}{\\Delta \\omega^2}$$\n\nDepending on the convention used in your reference/course, the resulting phase noise is expressed in one of three closely related ways:\n\n#### **A. Phase Power Spectral Density, $S_\\phi(\\Delta \\omega)$**\nMultiplying the input noise PSD $S_{\\text{th}}$ by the squared magnitude of the transfer function gives the total phase noise PSD:\n$$S_\\phi(\\Delta \\omega) = \\frac{K_{\\text{VCO}}^2}{\\Delta \\omega^2} S_{\\text{th}}$$\n\n#### **B. Single-Sideband (SSB) Phase Noise, $\\mathcal{L}(\\Delta \\omega)$ (Standard IEEE Definition)**\nBy the standard definition $\\mathcal{L}(\\Delta \\omega) = \\frac{1}{2} S_\\phi(\\Delta \\omega)$ (where a noise tone $v_n(t) = V_m \\cos(\\Delta \\omega t)$ has average power $\\frac{V_m^2}{2} = S_{\\text{th}}$ in a $1\\text{ Hz}$ bandwidth):\n$$\\mathcal{L}(\\Delta \\omega) = \\frac{K_{\\text{VCO}}^2}{2 \\Delta \\omega^2} S_{\\text{th}} \\quad \\text{or} \\quad \\mathcal{L}(\\Delta f) = \\frac{K_{\\text{VCO,Hz}}^2}{2 \\Delta f^2} S_{\\text{th}}$$\n*(where $K_{\\text{VCO}} = 2\\pi K_{\\text{VCO,Hz}}$).*\n\n#### **C. Narrowband FM Tone Approximation (Razavi's Textbook Convention)**\nIn Behzad Razavi's texts and columns (where this figure originates), a noise component at offset $\\Delta \\omega$ is often modeled as a sinusoid $V_m \\cos(\\Delta \\omega t)$ which modulates the VCO output:\n$$V_{\\text{VCO}}(t) = V_0 \\cos\\left[\\omega_0 t + \\frac{K_{\\text{VCO}} V_m}{\\Delta \\omega} \\sin(\\Delta \\omega t)\\right] \\approx V_0 \\cos(\\omega_0 t) + \\frac{K_{\\text{VCO}} V_m}{2\\Delta \\omega} V_0 \\big[\\cos(\\omega_0 + \\Delta \\omega)t - \\cos(\\omega_0 - \\Delta \\omega)t\\big]$$\nTaking the ratio of the sideband power to the carrier power $\\left(\\frac{K_{\\text{VCO}} V_m}{2 \\Delta \\omega}\\right)^2$ and substituting $V_m^2 \\rightarrow S_{\\text{th}}$ directly yields Razavi's expression:\n$$\\mathcal{L}(\\Delta \\omega) = \\frac{K_{\\text{VCO}}^2 S_{\\text{th}}}{4 \\Delta \\omega^2}$$\n\n---\n\n### Summary in $\\text{dBc/Hz}$\n\nTo express the result in $\\text{dBc/Hz}$ at an offset frequency $\\Delta f = \\frac{\\Delta \\omega}{2\\pi}$:\n$$\\mathcal{L}(\\Delta f)\\big|_{\\text{dBc/Hz}} = 10 \\log_{10}\\!\\left( \\frac{K_{\\text{VCO}}^2 S_{\\text{th}}}{4 \\Delta \\omega^2} \\right) \\quad \\text{or} \\quad 10 \\log_{10}\\!\\left( \\frac{K_{\\text{VCO}}^2 S_{\\text{th}}}{2 \\Delta \\omega^2} \\right)$$",
        "format": "markdown",
        "sha256": "afd674db391375658ba18c12cd00bb0b55d44a65745a3a4bcae1220c116a8304"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, converts LDO noise through the VCO frequency sensitivity and FM-to-phase integration, and gives the required 1/offset-frequency-squared dependence. It also explains the direct varactor connection and its relation to KVCO. Differences in factors and notation are secondary under the golden solution.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1160,
        "output_tokens": 5405,
        "total_tokens": 6565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1160,
        "output_tokens": 5405,
        "total_tokens": 6565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise caused by the LDO’s thermal noise $S_{\\text{th}}$, we need to determine how voltage fluctuations at the LDO output ($V_{\\text{out}}$) modulate the oscillation frequency of the VCO, and then convert those frequency fluctuations into phase fluctuations.\n\n---\n\n### Step 1: Find the VCO Supply Sensitivity ($\\partial \\omega_{\\text{osc}} / \\partial V_{\\text{out}}$)\n\n1. **DC/Low-Frequency Path through the Inductors:**\n   For low-frequency noise components at an offset frequency $\\Delta \\omega$ (where $\\Delta \\omega \\ll \\omega_{\\text{osc}}$), the inductors $L_1$ act as short circuits. Consequently, the average (low-frequency) voltage at the oscillating nodes $X$ and $Y$ directly tracks the LDO output voltage $V_{\\text{out}}$.\n\n2. **Modulation of the Varactors:**\n   The gates of the MOS varactors $M_{\\text{v1}}$ and $M_{\\text{v2}}$ are connected to nodes $X$ and $Y$, while their source/drain terminals are tied to the control voltage $V_{\\text{cont}}$. Therefore, the average bias voltage across the varactors is:\n   $$V_{\\text{var}} = V_{\\text{out}} - V_{\\text{cont}}$$\n\n3. **Equivalence to $K_{\\text{VCO}}$:**\n   Because the varactor capacitance depends only on the voltage *difference* $(V_{\\text{out}} - V_{\\text{cont}})$, a small change in $V_{\\text{out}}$ alters the oscillation frequency by the exact same magnitude (with opposite polarity) as a small change in $V_{\\text{cont}}$. Thus, the sensitivity of the VCO frequency to $V_{\\text{out}}$ is equal in magnitude to the VCO gain, $K_{\\text{VCO}}$:\n   $$\\left| \\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{out}}} \\right| = \\left| \\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{cont}}} \\right| = K_{\\text{VCO}}$$\n\n*(Note: The switched-capacitor banks $B_1$ and $B_2$ use linear metal capacitors that do not change with voltage, so the varactors are the dominant frequency-modulation mechanism).*\n\n---\n\n### Step 2: Convert Voltage Noise to Output Phase Noise\n\nLet $v_{n,\\text{out}}(t)$ be the LDO thermal noise voltage at $V_{\\text{out}}$ with a power spectral density (PSD) of $S_{\\text{th}}$ (in $\\text{V}^2/\\text{Hz}$).\n\n1. **Frequency Fluctuation:**\n   The instantaneous angular frequency deviation $\\Delta \\omega(t)$ produced by $v_{n,\\text{out}}(t)$ is:\n   $$\\Delta \\omega(t) = K_{\\text{VCO}} \\cdot v_{n,\\text{out}}(t)$$\n   *(where $K_{\\text{VCO}}$ is in $\\text{rad}\\cdot\\text{s}^{-1}/\\text{V}$).*\n\n2. **Phase Fluctuation (Integration of Frequency):**\n   Since phase is the time integral of frequency, the excess phase $\\phi(t)$ is:\n   $$\\phi(t) = \\int \\Delta \\omega(t) \\, dt = K_{\\text{VCO}} \\int v_{n,\\text{out}}(t) \\, dt$$\n\n   Taking the Laplace transform ($\\int dt \\leftrightarrow \\frac{1}{s}$), the transfer function from LDO output voltage noise to VCO excess phase is:\n   $$\\frac{\\Phi(s)}{V_{n,\\text{out}}(s)} = \\frac{K_{\\text{VCO}}}{s}$$\n\n3. **Phase Noise Spectrum at Offset Frequency $\\Delta \\omega = 2\\pi \\Delta f$:**\n   Evaluating the magnitude squared of the transfer function at $s = j\\Delta \\omega$, the power spectral density of the output phase, $S_\\phi(\\Delta \\omega)$, is:\n   $$S_\\phi(\\Delta \\omega) = \\left| \\frac{K_{\\text{VCO}}}{j\\Delta \\omega} \\right|^2 S_{\\text{th}} = \\frac{K_{\\text{VCO}}^2}{\\Delta \\omega^2} S_{\\text{th}}$$\n\n---\n\n### Step 3: Expressing as Single-Sideband (SSB) Phase Noise $\\mathcal{L}(\\Delta \\omega)$\n\nDepending on the textbook convention used, the single-sideband phase noise (ratio of noise power in a $1\\text{-Hz}$ bandwidth at offset $\\Delta \\omega$ to the carrier power) is written as:\n\n* **Standard IEEE Definition ($\\mathcal{L}(\\Delta \\omega) = \\frac{1}{2} S_\\phi(\\Delta \\omega)$):**\n  $$\\mathcal{L}(\\Delta \\omega) = \\frac{K_{\\text{VCO}}^2}{2 \\Delta \\omega^2} S_{\\text{th}}$$\n  *(Note: If $K_{\\text{VCO}}$ is given in $\\text{Hz/V}$ and offset frequency $\\Delta f$ in $\\text{Hz}$, the $2\\pi$ factors in the numerator and denominator cancel out, leaving $\\mathcal{L}(\\Delta f) = \\frac{K_{\\text{VCO,Hz}}^2}{2 \\Delta f^2} S_{\\text{th}}$).*\n\n* **Razavi's Narrowband FM Convention:**\n  In Behzad Razavi's literature (where this figure originates), a modulating sinusoid $V_m \\cos(\\Delta \\omega t)$ creates sidebands of relative power $\\left(\\frac{K_{\\text{VCO}} V_m}{2 \\Delta \\omega}\\right)^2 = \\frac{K_{\\text{VCO}}^2 V_m^2}{4 \\Delta \\omega^2}$. Substituting $S_{\\text{th}}$ directly for $V_m^2$ yields:\n  $$\\mathcal{L}(\\Delta \\omega) = \\frac{K_{\\text{VCO}}^2}{4 \\Delta \\omega^2} S_{\\text{th}}$$\n  *(or $\\frac{K_{\\text{VCO}}^2}{2 \\Delta \\omega^2} S_{\\text{th}}$ if substituting RMS power $\\overline{v_n^2} = \\frac{V_m^2}{2} = S_{\\text{th}}$).*",
        "format": "markdown",
        "sha256": "d8a3eb997e9fa1878c45f7d4e4f98c87accc24618e388aa714237e586f5901a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing through the varactors, relates the sensitivity to KVCO, and converts the LDO voltage-noise spectrum to phase noise with the required inverse-square offset dependence. The differing factor conventions are secondary under the golden solution.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1160,
        "output_tokens": 5545,
        "total_tokens": 6705,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1160,
        "output_tokens": 5545,
        "total_tokens": 6705,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise caused by the LDO’s thermal noise $S_{th}$, we determine how voltage fluctuations at $V_{\\text{out}}$ modulate the oscillation frequency and convert those frequency fluctuations into phase fluctuations.\n\n---\n\n### Step 1: Find the VCO Supply Sensitivity ($\\partial \\omega_{\\text{osc}} / \\partial V_{\\text{out}}$)\n\n1. **DC Bias at Nodes $X$ and $Y$:** \n   Because the inductors $L_1$ have a negligible DC voltage drop, the average (DC) voltage at the drain nodes $X$ and $Y$ is equal to the LDO output voltage, $V_{\\text{out}}$.\n2. **Voltage Across the Varactors:** \n   The gates of the MOS varactors $M_{v1}$ and $M_{v2}$ are connected to nodes $X$ and $Y$, while their source/drain terminals are tied to the control voltage $V_{\\text{cont}}$. Therefore, the average gate-to-channel voltage across each varactor is:\n   $$V_{\\text{var,avg}} = V_{\\text{out}} - V_{\\text{cont}}$$\n3. **Frequency Modulation:** \n   Because the varactor capacitance depends on the difference $V_{\\text{out}} - V_{\\text{cont}}$, any low-frequency fluctuation on $V_{\\text{out}}$ changes the varactor capacitance by the exact same amount (with opposite polarity) as a fluctuation on $V_{\\text{cont}}$. \n\n   Consequently, the sensitivity of the VCO frequency to $V_{\\text{out}}$ has the same magnitude as the VCO tuning gain $K_{\\text{VCO}}$:\n   $$\\left| \\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{out}}} \\right| = \\left| \\frac{\\partial \\omega_{\\text{osc}}}{\\partial V_{\\text{cont}}} \\right| = K_{\\text{VCO}}$$\n\n---\n\n### Step 2: Convert Voltage Noise to Phase Fluctuations\n\nIn the time domain, a small noise voltage $v_n(t)$ at $V_{\\text{out}}$ produces an instantaneous frequency deviation:\n$$\\Delta \\omega(t) = K_{\\text{VCO}} \\, v_n(t)$$\n*(where $K_{\\text{VCO}}$ is in $\\text{rad/s/V}$).*\n\nSince phase is the time integral of frequency, the excess output phase $\\phi_{\\text{out}}(t)$ is:\n$$\\phi_{\\text{out}}(t) = \\int \\Delta \\omega(t) \\, dt = K_{\\text{VCO}} \\int v_n(t) \\, dt$$\n\nIn the frequency domain (at an offset frequency $\\Delta \\omega = 2\\pi \\Delta f$ from the carrier), integration corresponds to division by $j\\Delta \\omega$, giving the transfer function from LDO output voltage to VCO output phase:\n$$\\frac{\\Phi_{\\text{out}}(j\\Delta \\omega)}{V_{\\text{out}}(j\\Delta \\omega)} = \\frac{K_{\\text{VCO}}}{j\\Delta \\omega}$$\n\n---\n\n### Step 3: Compute the Output Phase Noise\n\nMultiplying the input thermal noise power spectral density $S_{th}$ (in $\\text{V}^2/\\text{Hz}$) by the squared magnitude of the transfer function gives the **phase noise spectrum $S_{\\phi}(\\Delta \\omega)$**:\n\n$$S_{\\phi}(\\Delta \\omega) = \\left| \\frac{K_{\\text{VCO}}}{j\\Delta \\omega} \\right|^2 S_{th} = \\frac{K_{\\text{VCO}}^2 \\, S_{th}}{\\Delta \\omega^2}$$\n\nDepending on the convention used for **Single-Sideband (SSB) Phase Noise $\\mathcal{L}(\\Delta \\omega)$**, this is expressed in one of two standard ways:\n\n1. **Standard IEEE Definition ($\\mathcal{L}(\\Delta \\omega) = \\frac{1}{2} S_{\\phi}(\\Delta \\omega)$):**\n   Viewing $S_{th}$ as the single-sided RMS noise density ($V_{\\text{rms}}^2/\\text{Hz}$), the power split into each sideband at $\\omega_0 \\pm \\Delta \\omega$ is half of $S_{\\phi}(\\Delta \\omega)$:\n   $$\\mathcal{L}(\\Delta \\omega) = \\frac{K_{\\text{VCO}}^2 \\, S_{th}}{2 \\Delta \\omega^2} = \\frac{K_{\\text{VCO,Hz}}^2 \\, S_{th}}{2 \\Delta f^2}$$\n   *(where $K_{\\text{VCO}} = 2\\pi K_{\\text{VCO,Hz}}$ and $\\Delta \\omega = 2\\pi \\Delta f$).*\n\n2. **Razavi's Narrowband FM Convention:**\n   In Behzad Razavi's articles/textbooks (the source of this diagram), a modulating tone $V_m \\cos(\\Delta \\omega t)$ produces sidebands of relative amplitude $\\frac{K_{\\text{VCO}} V_m}{2 \\Delta \\omega}$, or relative power $\\frac{K_{\\text{VCO}}^2 V_m^2}{4 \\Delta \\omega^2}$. Substituting $S_{th}$ directly for $V_m^2$ yields:\n   $$\\mathcal{L}(\\Delta \\omega) = \\frac{K_{\\text{VCO}}^2 \\, S_{th}}{4 \\Delta \\omega^2}$$\n\n*(Note: To express the final result in $\\text{dBc/Hz}$, take $10 \\log_{10}(\\mathcal{L}(\\Delta \\omega))$.)*",
        "format": "markdown",
        "sha256": "24d067544100c4b0ba76fe46bf2c36a2c60f12bb69e508e68820b2dfc2204d81"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies supply pushing, derives the frequency sensitivity from the varactor bias, and applies FM-to-phase conversion with the required inverse-square offset dependence. The exact equality to KVCO and the differing factor-of-two conventions are minor; the core reasoning and design insight are correct.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1160,
        "output_tokens": 5610,
        "total_tokens": 6770,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4371,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1160,
        "output_tokens": 5610,
        "total_tokens": 6770,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4371,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor $C_T$ to the tail node $P$ introduces a **fundamental trade-off** with competing effects on the oscillator's phase noise. Depending on the oscillation amplitude and the size of $C_T$, it can either improve or severely degrade the phase noise:\n\n---\n\n### 1. The Beneficial Effect: Filtering Tail Current Noise at $2\\omega_0$\n* **Mechanism:** In a standard cross-coupled LC oscillator, the low-frequency ($1/f$) noise and thermal noise near $\\omega_0$ from the tail current source ($I_{SS}$) do not directly convert to phase noise in a symmetric circuit (they mainly cause amplitude modulation). However, **thermal noise from $I_{SS}$ at frequencies around $2\\omega_0$** is mixed (commutated) down to $\\omega_0$ by the switching action of $M_1$ and $M_2$, directly translating into phase noise.\n* **Impact of $C_T$:** Adding a large capacitor $C_T$ in parallel with $I_{SS}$ provides a low-impedance path to ground at $2\\omega_0$. This shunts the high-frequency thermal noise of the tail current source to ground before it can enter the switching pair, **reducing the phase noise contribution of $I_{SS}$**.\n\n---\n\n### 2. The Detrimental Effects: Tank Loading and Extra Noise from $M_1, M_2$\nWhile $C_T$ suppresses noise from $I_{SS}$, making node $P$ an AC ground introduces two major problems:\n\n1. **Degradation of Tank $Q$ in the Triode Region:**\n   * For large oscillation swings, at the peaks of the waveform (when $V_X$ is at its minimum and $V_Y$ is at its maximum, or vice versa), the conducting transistor ($M_1$ or $M_2$) enters the **triode (linear) region**.\n   * **Without $C_T$:** Node $P$ sees the high output impedance of the current source $I_{SS}$. Even if $M_1$ enters the triode region, there is no AC path to ground at node $P$, so it does not heavily load the LC tank.\n   * **With $C_T$:** Node $P$ acts as an AC ground. When $M_1$ or $M_2$ enters the triode region, it creates a low-resistance path from the output node ($X$ or $Y$) directly to ground through $C_T$. This **heavily loads the LC tank**, reduces its effective quality factor ($Q$), lowers the oscillation amplitude, and **degrades (increases) the phase noise**.\n\n2. **Loss of Source Degeneration for $M_1$ and $M_2$ Noise:**\n   * **Without $C_T$:** When the oscillator is near the peak of its swing, one transistor is fully ON and the other is OFF. Because the ON transistor is degenerated by the high impedance of $I_{SS}$, its thermal noise cannot flow into the tank (therefore, $M_1$ and $M_2$ mainly inject noise only near the zero-crossings when both are on).\n   * **With $C_T$:** Because $C_T$ grounds the source node $P$ at high frequencies, the ON transistor acts like a common-source stage with an AC-grounded source. Consequently, **the thermal noise of the ON transistor continues to flow into the tank** through $C_T$ even when the other transistor is completely OFF, increasing the noise contribution of the cross-coupled pair.\n\n---\n\n### Summary & Practical Design Solution\n* If the oscillation swing is small enough that $M_1$ and $M_2$ remain in saturation, a properly sized $C_T$ can **improve** phase noise by filtering the $2\\omega_0$ noise of $I_{SS}$ (and reshaping the drain currents into narrower Class-C-like pulses).\n* If the oscillation swing is large (pushing $M_1$ and $M_2$ into the triode region), adding a large $C_T$ alone will **degrade** phase noise due to tank loading.\n\n**How this is solved in practice (The Hegazi/Abidi Noise Filter):**  \nTo get the benefit of $C_T$ without the tank-loading penalty, an **inductor ($L_T$) is placed between the sources of $M_1, M_2$ and node $P$**. $L_T$ is chosen to resonate in parallel with the parasitic capacitances at the source node at **$2\\omega_0$**:\n* $C_T$ still shorts the $2\\omega_0$ noise of $I_{SS}$ to ground.\n* The parallel resonance at $2\\omega_0$ presents a **high impedance** to the sources of $M_1$ and $M_2$, preventing them from loading the tank when they enter the triode region.",
        "format": "markdown",
        "sha256": "bbe24eb043b5c20607c79539e111c011cf7bd6a48b50b90a9356f90c2b24e293"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly describes a non-monotonic tradeoff and identifies class-C-like switching and possible triode operation. However, it misses the key improvement mechanism—peak tank currents exceeding ISS—and overemphasizes 2ω0 tail-noise filtering; it also omits the stated flicker-noise upconversion or large-CT instability.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 3843,
        "total_tokens": 4976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2758,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 3843,
        "total_tokens": 4976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2758,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor $C_T$ to the tail node $P$ is a classic design problem in RF IC design (featured in Behzad Razavi’s *RF Microelectronics*) because it introduces **competing effects** on the oscillator's phase noise:\n\n### 1. The Beneficial Effect: Filtering Tail Current Noise (Improves Phase Noise)\n* **Mechanism:** In a standard cross-coupled oscillator, thermal noise from the tail current source $I_{SS}$ at frequencies around **$2\\omega_0$** (twice the oscillation frequency) modulates the tail current and gets mixed down by the switching action of $M_1$ and $M_2$ into the tank at $\\omega_0$, converting into phase noise.\n* **Impact of $C_T$:** Adding a large capacitor $C_T$ creates a low-impedance path to ground at $2\\omega_0$. This **filters out (shorts to ground) the $2\\omega_0$ thermal noise** of the tail current source $I_{SS}$, significantly reducing its contribution to the phase noise.\n\n---\n\n### 2. The Detrimental Effects: Increasing $M_1/M_2$ Noise and Loading the Tank (Degrades Phase Noise)\nWhile $C_T$ suppresses noise from $I_{SS}$, a low impedance at node $P$ at high frequencies harms the circuit in two ways:\n\n* **Loss of Degeneration for $M_1$ and $M_2$ Noise:** \n  * **Without $C_T$:** Near the peaks of the oscillation waveform, one transistor (say, $M_1$) is fully ON and the other ($M_2$) is OFF. Because the tail current source presents a high impedance, $M_1$ acts as a cascode device (degenerated by the high impedance of $I_{SS}$) and **cannot inject its own thermal noise** into the output node $X$. Thus, $M_1$ and $M_2$ only contribute noise near the zero-crossings when both are simultaneously ON.\n  * **With $C_T$:** Node $P$ acts as an AC ground at $\\omega_0$. When $M_1$ is ON and $M_2$ is OFF, the source of $M_1$ is grounded through $C_T$, allowing $M_1$ to **inject its channel thermal noise into the tank for the entire half-cycle**, increasing the phase noise contribution of the switching pair.\n\n* **Tank Loading ($Q$ Degradation) in the Triode Region:**\n  * If the oscillation amplitude at nodes $X$ and $Y$ is large enough, the ON transistor ($M_1$ or $M_2$) enters the **triode region** when its drain voltage reaches its minimum peak.\n  * **Without $C_T$:** Even if $M_1$ enters the triode region, its source node $P$ sees the high impedance of $I_{SS}$, so it does not load the tank to ground.\n  * **With $C_T$:** Because $C_T$ holds node $P$ at AC ground, a transistor entering the triode region creates a low-resistance path ($R_{on}$) from the tank (node $X$ or $Y$) directly to AC ground through $C_T$. This **heavily loads the LC tank, degrades its quality factor ($Q$)**, and severely worsens the phase noise.\n\n---\n\n### Summary & Practical Design Takeaway\n* As $C_T$ is initially increased from zero, phase noise may **improve** as the $2\\omega_0$ noise of $I_{SS}$ is filtered out, but making $C_T$ too large **degrades** the phase noise due to tank loading in the triode region and increased noise injection from $M_1$ and $M_2$.\n* **The Classic Solution (Tail Noise Filter):** To get the best of both worlds—filtering $I_{SS}$ noise while presenting a high impedance to the sources of $M_1$ and $M_2$ at $2\\omega_0$—designers often place an **inductor in series with $I_{SS}$** (resonating with $C_T$ at $2\\omega_0$) and a large capacitor across $I_{SS}$ to ground.",
        "format": "markdown",
        "sha256": "6655c92b99f393ee0445531a25c0635d7652294efebfd943315722dcdc874576"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes a non-monotonic tradeoff and mentions triode loading, but attributes the improvement to filtering tail-current noise rather than class-C switching with peak tank currents above ISS. It also misses the small-CT flicker-noise upconversion and large-CT low-frequency-instability effects.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 2853,
        "total_tokens": 3986,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 2853,
        "total_tokens": 3986,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a large capacitor $C_T$ to the tail node $P$ has **competing effects** on the phase noise of the cross-coupled LC oscillator. While it is intended to filter out the noise of the tail current source, it introduces severe side effects that can actually **degrade the overall phase noise**. \n\nHere is the detailed breakdown of what happens:\n\n---\n\n### 1. The Intended Benefit: Suppressing Tail Current Noise\n* **How tail noise affects the oscillator:** The thermal noise generated by the tail current source ($I_{SS}$) at frequencies around the second harmonic ($2\\omega_0$) is commutated (mixed down) by the switching pair ($M_1$ and $M_2$) to the fundamental oscillation frequency ($\\omega_0$), directly converting into phase noise.\n* **Effect of $C_T$:** Adding a large capacitor $C_T$ provides a low-impedance path to ground at high frequencies. This shorts out the $2\\omega_0$ noise of $I_{SS}$ to ground, **reducing the phase noise contribution of the tail current source.**\n\n---\n\n### 2. The Detrimental Side Effects: Why Phase Noise Can Worsen\nProviding a low-impedance AC ground at node $P$ via $C_T$ harms the oscillator in two major ways:\n\n#### A. Loss of Source Degeneration for $M_1$ and $M_2$\n* **Without $C_T$:** Near the peaks of the oscillation waveform, one transistor (say, $M_1$) is fully ON while the other ($M_2$) is completely OFF. Because the ideal tail current source $I_{SS}$ presents an infinite impedance, the source of $M_1$ sees an open circuit. Due to this heavy source degeneration, **$M_1$ cannot inject its own thermal noise into the tank** during the peaks; the active devices only inject noise near the zero-crossings when both are on.\n* **With $C_T$:** Node $P$ is now at AC ground at high frequencies. When $M_1$ is fully ON and $M_2$ is OFF, $M_1$ acts as a common-source stage with a grounded source, allowing it to **inject thermal noise into the tank even at the peaks of the oscillation**. This significantly increases the phase noise contribution of $M_1$ and $M_2$.\n\n#### B. Tank Loading ($Q$ Degradation) in the Triode Region\n* If the oscillation amplitude at nodes $X$ and $Y$ is large enough, the conducting transistor enters the **triode region** at the negative peak of its drain voltage (e.g., when $V_X$ is at its minimum and $V_Y$ is at its maximum, $M_1$ is in deep triode).\n* In the triode region, $M_1$ acts as a low-value resistor connecting the tank node $X$ directly to the tail node $P$.\n* **With $C_T$ present:** Because $C_T$ holds node $P$ at AC ground, the LC tank is periodically loaded by the low on-resistance of $M_1$ (and $M_2$) to ground during the peaks of every cycle. This **degrades the quality factor ($Q$) of the tank** and reduces the oscillation amplitude, both of which **worsen the phase noise**.\n\n---\n\n### Summary\nAdding $C_T$ alone is a trade-off:\n1. It **decreases** the phase noise caused by the tail current source $I_{SS}$ (by filtering its $2\\omega_0$ noise).\n2. It **increases** the phase noise caused by the core transistors $M_1$ and $M_2$ (by removing their high-impedance source degeneration and allowing them to load the tank in the triode region).\n\n*(Note: To get both benefits—filtering $I_{SS}$ noise while maintaining a high impedance at node $P$ at $2\\omega_0$—designers often insert an inductor between the sources of $M_1, M_2$ and node $P$ to resonate with the parasitic capacitances at $2\\omega_0$, known as a **tail noise filter**).*",
        "format": "markdown",
        "sha256": "d3c0b874e4b502979e3572356968826de4da39df766b8284cfc7d2daeecef8c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It recognizes competing effects and a triode-loading degradation, but misses the key class-C mechanism in which peak tank currents exceed ISS and lower phase noise. It instead relies on tail-noise filtering and source-degeneration claims, so it is only mostly correct.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 3237,
        "total_tokens": 4370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2321,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1133,
        "output_tokens": 3237,
        "total_tokens": 4370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2321,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **quadrature $LC$ oscillator (QVCO)** consisting of two identical cross-coupled $LC$ oscillators coupled to each other—one through a direct differential pair (bottom) and the other through a cross-connected (inverting) differential pair (top).\n\n---\n\n### 1. Small-Signal Model and KCL Equations\n\nAssume the circuit is symmetric and denote the single-ended parameters at each of the four output nodes ($X_1, Y_1, X_2, Y_2$) as:\n* **$L$**: Tank inductance connected to $V_{DD}$\n* **$C$**: Total capacitance from each output node to ground\n* **$R_p$**: Equivalent parallel resistance of each single-ended tank\n* **$g_{m}$**: Small-signal transconductance of each transistor in the core cross-coupled pairs (biased by $I_{SS}$)\n* **$g_{m1}$**: Small-signal transconductance of each transistor in the coupling differential pairs (biased by $I_1$)\n\nThe admittance of each single-ended $LC$ tank at frequency $\\omega$ is:\n$$Y_T(j\\omega) = \\frac{1}{R_p} + j\\left(\\omega C - \\frac{1}{\\omega L}\\right)$$\n\nSince each stage operates differentially ($V_{Y1} = -V_{X1}$ and $V_{Y2} = -V_{X2}$):\n\n1. **At node $X_1$ (Top Oscillator):**\n   * The core cross-coupled pair draws a small-signal current $g_m \\frac{V_{Y1} - V_{X1}}{2} = -g_m V_{X1}$.\n   * The coupling pair (gates at $Y_2$ and $X_2$) draws a small-signal current $g_{m1} \\frac{V_{Y2} - V_{X2}}{2} = -g_{m1} V_{X2}$.\n   \n   Applying KCL at node $X_1$:\n   $$\\left[ Y_T(j\\omega) - g_m \\right] V_{X1} = g_{m1} V_{X2} \\quad \\text{--- (1)}$$\n\n2. **At node $X_2$ (Bottom Oscillator):**\n   * The core cross-coupled pair draws a current $-g_m V_{X2}$.\n   * The coupling pair (gates directly connected to $X_1$ and $Y_1$) draws a current $g_{m1} \\frac{V_{X1} - V_{Y1}}{2} = +g_{m1} V_{X1}$.\n\n   Applying KCL at node $X_2$:\n   $$\\left[ Y_T(j\\omega) - g_m \\right] V_{X2} = -g_{m1} V_{X1} \\quad \\text{--- (2)}$$\n\n---\n\n### 2. Oscillation Condition and Frequency Derivation\n\nCombining Equations (1) and (2) by eliminating $V_{X1}$ and $V_{X2}$ yields:\n$$\\left[ Y_T(j\\omega) - g_m \\right]^2 = -g_{m1}^2 \\implies Y_T(j\\omega) - g_m = \\pm j g_{m1}$$\n\n*(Note: Substituting this back into Eq. (1) gives $V_{X2} = \\pm j V_{X1}$, confirming that the two oscillators operate in quadrature with a $\\pm 90^\\circ$ phase shift.)*\n\nSubstituting $Y_T(j\\omega)$ into the characteristic equation gives:\n$$\\left(\\frac{1}{R_p} - g_m\\right) + j\\left(\\omega C - \\frac{1}{\\omega L}\\right) = \\pm j g_{m1}$$\n\nEquating the real and imaginary parts separately:\n\n* **Real Part (Amplitude / Startup Condition):**\n  $$\\frac{1}{R_p} - g_m = 0 \\implies g_m = \\frac{1}{R_p}$$\n\n* **Imaginary Part (Oscillation Frequency):**\n  $$\\omega C - \\frac{1}{\\omega L} = \\pm g_{m1}$$\n\n---\n\n### 3. Oscillation Frequency Expressions\n\n#### **A. Exact Solution**\nRearranging the imaginary part into a quadratic equation in $\\omega$:\n$$\\omega^2 - \\left(\\pm\\frac{g_{m1}}{C}\\right)\\omega - \\frac{1}{LC} = 0$$\n\nSolving for $\\omega > 0$:\n$$\\omega_{\\text{osc}} = \\sqrt{\\frac{1}{LC} + \\left(\\frac{g_{m1}}{2C}\\right)^2} \\;\\pm\\; \\frac{g_{m1}}{2C}$$\n\n---\n\n#### **B. First-Order Estimate (Weak Coupling, $\\frac{g_{m1}}{2C} \\ll \\omega_0$)**\nLetting $\\omega_0 = \\frac{1}{\\sqrt{LC}}$ be the natural resonance frequency of the isolated tanks and writing $\\omega_{\\text{osc}} = \\omega_0 + \\Delta\\omega$ (with $|\\Delta\\omega| \\ll \\omega_0$):\n$$\\omega C - \\frac{1}{\\omega L} \\approx 2C\\,\\Delta\\omega = \\pm g_{m1} \\implies \\Delta\\omega \\approx \\pm\\frac{g_{m1}}{2C}$$\n\nThus, the estimated oscillation frequency is:\n$$\\boxed{\\omega_{\\text{osc}} \\approx \\frac{1}{\\sqrt{LC}} \\pm \\frac{g_{m1}}{2C}}$$\n\n---\n\n#### **C. Expression in Terms of Tank $Q$ and Bias Currents**\nUsing the tank quality factor $Q = \\omega_0 R_p C$ and the steady-state condition $R_p \\approx 1/g_m$:\n$$\\omega_{\\text{osc}} \\approx \\omega_0 \\left( 1 \\pm \\frac{g_{m1} R_p}{2Q} \\right) = \\omega_0 \\left( 1 \\pm \\frac{1}{2Q}\\frac{g_{m1}}{g_m} \\right)$$\n\nIf all transistors have identical dimensions $(W/L)$ and follow square-law operation ($\\frac{g_{m1}}{g_m} = \\sqrt{\\frac{I_1}{I_{SS}}}$):\n$$\\boxed{\\omega_{\\text{osc}} \\approx \\omega_0 \\left( 1 \\pm \\frac{1}{2Q}\\sqrt{\\frac{I_1}{I_{SS}}} \\right)}$$",
        "format": "markdown",
        "sha256": "2d5f44a13c1f261e2aa84dc0a8cbef7210b4dd331a729e17c7ce71dcee8d2e91"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer gives the tank resonance and the coupling-induced shift in the required small-signal form, Δω ≈ (g_c/g_core)ω0/(2Q), with both possible signs. Its intermediate g_c/(2C) expression is tied to the stated gmRp ≈ 1 condition; the square-law current conversion is ancillary.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 5879,
        "total_tokens": 7015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4400,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 5879,
        "total_tokens": 7015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4400,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **Cross-Coupled Quadrature $LC$ Oscillator (QVCO)** consisting of two identical oscillators ($X_1, Y_1$ and $X_2, Y_2$) coupled together via auxiliary differential pairs biased by $I_1$ (one connected directly and the other cross-connected to enforce a $90^\\circ$ quadrature phase shift).\n\nBelow is the step-by-step derivation of the oscillation frequency, covering both the **standard $LC$ tank model** (where the total capacitance $C$ at each output node is omitted from the drawing for simplicity, as in Razavi’s *RF Microelectronics*) and the **purely inductive limiting case** ($C = 0$).\n\n---\n\n### 1. Loop Equations & Quadrature Condition\n\nLet:\n* $V_1 = V_{X1} - V_{Y1}$ and $V_2 = V_{X2} - V_{Y2}$ be the differential output voltages of the top and bottom oscillators.\n* $g_m$ be the small-signal transconductance of the inner cross-coupled core transistors (biased by $I_{SS}$).\n* $g_{m1}$ be the small-signal transconductance of the outer coupling transistors (biased by $I_1$).\n* $Y_T(j\\omega)$ be the single-ended load admittance seen at each output node ($X_1, Y_1, X_2, Y_2$) to AC ground.\n\nInspecting the gate-drain connections of the two stages:\n1. **Top Oscillator ($X_1, Y_1$):** The inner cross-coupled pair provides a negative conductance $-g_m$, while the outer coupling pair has its gates cross-connected to $Y_2$ and $X_2$, injecting a current proportional to $+g_{m1}V_2$:\n   $$V_1 Y_T(j\\omega) = g_m V_1 + g_{m1} V_2 \\implies \\left[Y_T(j\\omega) - g_m\\right] V_1 = g_{m1} V_2$$\n\n2. **Bottom Oscillator ($X_2, Y_2$):** The inner cross-coupled pair provides $-g_m$, while the outer coupling pair has its gates directly connected to $X_1$ and $Y_1$, injecting a current proportional to $-g_{m1}V_1$:\n   $$V_2 Y_T(j\\omega) = g_m V_2 - g_{m1} V_1 \\implies \\left[Y_T(j\\omega) - g_m\\right] V_2 = -g_{m1} V_1$$\n\nMultiplying the two equations together and canceling $V_1 V_2$:\n$$\\left[Y_T(j\\omega) - g_m\\right]^2 = -g_{m1}^2 \\implies Y_T(j\\omega) - g_m = \\pm j g_{m1}$$\n\nThus, the Barkhausen oscillation criterion requires:\n$$Y_T(j\\omega) = g_m \\pm j g_{m1}$$\n*(Note: Substituting this back yields $V_2 = \\pm j V_1$, confirming that the two stages oscillate in quadrature with a $90^\\circ$ phase difference.)*\n\n---\n\n### 2. Oscillation Frequency Estimation\n\n#### Case A: Standard $LC$ Oscillator (with total capacitance $C$ and loss $R_p$ at each node)\nIn standard textbook schematics of this circuit, each output node has an implicit total tank capacitance $C$ (representing the tank capacitor plus transistor parasitics) and a parallel inductor loss resistance $R_p$:\n$$Y_T(j\\omega) = \\frac{1}{R_p} + j\\left(\\omega C - \\frac{1}{\\omega L}\\right)$$\n\nEquating the real and imaginary parts to $g_m \\pm j g_{m1}$:\n1. **Real Part (Startup/Amplitude Condition):**\n   $$\\frac{1}{R_p} = g_m \\implies g_m R_p \\ge 1$$\n\n2. **Imaginary Part (Frequency Condition):**\n   $$\\omega C - \\frac{1}{\\omega L} = \\pm g_{m1} \\implies \\omega^2 LC \\mp \\omega g_{m1} L - 1 = 0$$\n\nSolving this quadratic equation for $\\omega > 0$ gives the **exact small-signal oscillation frequency**:\n$$\\omega_{\\text{osc}} = \\frac{\\sqrt{(g_{m1} L)^2 + 4LC} \\pm g_{m1} L}{2LC} = \\omega_0 \\left[ \\sqrt{1 + \\left(\\frac{g_{m1}}{2\\omega_0 C}\\right)^2} \\pm \\frac{g_{m1}}{2\\omega_0 C} \\right]$$\nwhere $\\omega_0 = \\frac{1}{\\sqrt{LC}}$ is the uncoupled tank resonance frequency.\n\n* **Weak-Coupling Approximation ($g_{m1} \\ll 2\\omega_0 C$):**\n  $$\\omega_{\\text{osc}} \\approx \\omega_0 \\pm \\frac{g_{m1}}{2C} = \\frac{1}{\\sqrt{LC}} \\pm \\frac{g_{m1}}{2C}$$\n  $$f_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{LC}} \\pm \\frac{g_{m1}}{4\\pi C}$$\n\n* **In Terms of Tank $Q$ and Bias Currents ($I_1, I_{SS}$):**\n  Using $Q = \\omega_0 R_p C = \\frac{\\omega_0 C}{g_m}$:\n  * **Small-signal square-law model** $\\left(\\frac{g_{m1}}{g_m} = \\sqrt{\\frac{I_1}{I_{SS}}}\\right)$:\n    $$\\omega_{\\text{osc}} \\approx \\omega_0 \\left(1 \\pm \\frac{1}{2Q}\\sqrt{\\frac{I_1}{I_{SS}}}\\right)$$\n  * **Large-signal hard-switching model** (where the fundamental current amplitudes scale directly with the tail currents, $\\frac{G_{m1}}{G_m} = \\frac{I_1}{I_{SS}}$):\n    $$\\omega_{\\text{osc}} \\approx \\omega_0 \\left(1 \\pm \\frac{I_1}{2 Q I_{SS}}\\right)$$\n\n---\n\n#### Case B: Purely Inductive Load ($C = 0$, neglecting all node capacitances)\nIf the circuit literally contains only inductors $L$ (with parallel resistance $R_p$) and zero capacitance ($C = 0$), the tank admittance is:\n$$Y_T(j\\omega) = \\frac{1}{R_p} - j\\frac{1}{\\omega L}$$\n\nEquating the imaginary part to $\\pm g_{m1}$ (and taking the minus sign so that $\\omega_{\\text{osc}} > 0$):\n$$-\\frac{1}{\\omega_{\\text{osc}} L} = -g_{m1} \\implies \\omega_{\\text{osc}} = \\frac{1}{g_{m1} L} \\quad \\left(f_{\\text{osc}} = \\frac{1}{2\\pi g_{m1} L}\\right)$$\n\nIn **large-signal switching operation** (where $G_m = \\frac{1}{R_p}$ and $\\frac{G_{m1}}{G_m} = \\frac{I_1}{I_{SS}}$), this becomes:\n$$\\omega_{\\text{osc}} = \\frac{R_p}{L}\\frac{I_{SS}}{I_1} \\quad \\left(f_{\\text{osc}} = \\frac{R_p}{2\\pi L}\\frac{I_{SS}}{I_1}\\right)$$",
        "format": "markdown",
        "sha256": "357dce812f5831fbc82709ab15cef883f2163303506ff5967caebcbdbb6ab702"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer gives the tank resonance and the required coupling shift, including the large-signal form Δω ≈ (I₁/I_SS)ω₀/(2Q). The threshold and zero-capacitance discussions are unnecessary, but do not negate the correct estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 8819,
        "total_tokens": 9955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7055,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 8819,
        "total_tokens": 9955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7055,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "google/gemini-4-argon",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **parallel-coupled quadrature LC oscillator (QVCO)**. It consists of two identical cross-coupled LC oscillators (top: $X_1, Y_1$; bottom: $X_2, Y_2$) coupled via auxiliary differential pairs biased by $I_1$. Because one oscillator is coupled directly to the second while the second is cross-coupled back to the first, the two oscillators are forced to operate with a $90^\\circ$ (quadrature) phase shift.\n\n---\n\n### 1. Tank Parameters and Definitions\nLet the single-ended LC tank at each output node ($X_1, Y_1, X_2, Y_2$) be modeled by:\n* **Inductance:** $L$\n* **Total node capacitance** (including transistor parasitics): $C$\n* **Equivalent parallel tank resistance:** $R_p$\n* **Natural resonant frequency:** $\\omega_0 = \\frac{1}{\\sqrt{LC}}$\n* **Tank quality factor:** $Q = \\omega_0 R_p C = \\frac{R_p}{\\omega_0 L}$\n\nThe admittance of each single-ended tank is:\n$$Y_T(j\\omega) = \\frac{1}{Z_T(j\\omega)} = \\frac{1}{R_p} + j\\left(\\omega C - \\frac{1}{\\omega L}\\right)$$\n\n---\n\n### 2. Small-Signal Analysis (in terms of $g_m$)\nLet $g_m$ be the transconductance of the core cross-coupled transistors (biased at $I_{SS}$) and $g_{m1}$ be the transconductance of the coupling transistors (biased at $I_1$).\n\nAssuming differential operation ($V_{Y1} = -V_{X1}$ and $V_{Y2} = -V_{X2}$):\n\n1. **KCL at node $X_1$** (where the core gate is connected to $Y_1$ and the coupling gate is connected to $Y_2$):\n   $$V_{X1} Y_T(j\\omega) + g_m V_{Y1} + g_{m1} V_{Y2} = 0$$\n   $$V_{X1}\\left(Y_T(j\\omega) - g_m\\right) = g_{m1} V_{X2} \\quad \\text{--- (Equation 1)}$$\n\n2. **KCL at node $X_2$** (where the core gate is connected to $Y_2$ and the coupling gate is connected to $X_1$):\n   $$V_{X2} Y_T(j\\omega) + g_m V_{Y2} + g_{m1} V_{X1} = 0$$\n   $$V_{X2}\\left(Y_T(j\\omega) - g_m\\right) = -g_{m1} V_{X1} \\quad \\text{--- (Equation 2)}$$\n\nDividing Equation 1 by Equation 2 yields the quadrature relationship $V_{X2} = \\pm j V_{X1}$. Substituting this back into Equation 1 gives:\n$$Y_T(j\\omega) - g_m = \\pm j g_{m1}$$\n\nSubstituting the tank admittance $Y_T(j\\omega)$:\n$$\\left(\\frac{1}{R_p} - g_m\\right) + j\\left(\\omega C - \\frac{1}{\\omega L}\\right) = \\pm j g_{m1}$$\n\nEquating the real and imaginary parts:\n* **Real Part (Amplitude/Startup Condition):**\n  $$g_m = \\frac{1}{R_p}$$\n* **Imaginary Part (Frequency Condition):**\n  $$\\omega C - \\frac{1}{\\omega L} = \\pm g_{m1}$$\n\n#### Solving for the Oscillation Frequency ($\\omega_{\\text{osc}}$):\n* **Exact Solution:**\n  $$\\omega^2 LC \\mp \\omega g_{m1} L - 1 = 0 \\implies \\omega_{\\text{osc}} = \\omega_0 \\left( \\sqrt{1 + \\frac{g_{m1}^2 L}{4C}} \\pm \\frac{g_{m1}}{2}\\sqrt{\\frac{L}{C}} \\right)$$\n\n* **High-$Q$ Approximation** (for small frequency shift $\\Delta\\omega = \\omega_{\\text{osc}} - \\omega_0 \\ll \\omega_0$, where $\\omega C - \\frac{1}{\\omega L} \\approx 2C(\\omega_{\\text{osc}} - \\omega_0)$):\n  $$\\omega_{\\text{osc}} \\approx \\omega_0 \\pm \\frac{g_{m1}}{2C} = \\frac{1}{\\sqrt{LC}} \\pm \\frac{g_{m1}}{2C}$$\n\n  Using $g_m = \\frac{1}{R_p}$ and $Q = \\omega_0 R_p C$, this can also be written as:\n  $$\\omega_{\\text{osc}} \\approx \\omega_0 \\left( 1 \\pm \\frac{1}{2Q}\\frac{g_{m1}}{g_m} \\right)$$\n\n  *(Note: If the core and coupling transistors have identical dimensions and follow square-law behavior, $\\frac{g_{m1}}{g_m} = \\sqrt{\\frac{I_1}{I_{SS}}}$).*\n\n---\n\n### 3. Large-Signal Phasor Analysis (in terms of $I_{SS}$ and $I_1$)\nIn steady-state large-signal operation, the differential pairs experience complete current switching:\n1. The core pair injects a fundamental current of peak amplitude $I_{\\text{core}} = \\frac{2}{\\pi}I_{SS}$ **in phase** with the tank voltage.\n2. The coupling pair injects a fundamental current of peak amplitude $I_{\\text{couple}} = \\frac{2}{\\pi}I_1$ at a **$90^\\circ$ phase shift** ($\\pm j$) relative to the core current.\n\nThus, the total tank current leads or lags the tank voltage by a phase angle $\\phi$:\n$$\\tan\\phi = \\pm \\frac{I_{\\text{couple}}}{I_{\\text{core}}} = \\pm \\frac{I_1}{I_{SS}}$$\n\nTo sustain oscillation, the LC tank impedance $Z_T(j\\omega)$ must provide an equal and opposite phase shift. Near resonance ($\\omega \\approx \\omega_0$), the phase of a parallel RLC tank is:\n$$\\tan\\left(\\angle Z_T(j\\omega)\\right) \\approx -2 R_p C (\\omega_{\\text{osc}} - \\omega_0) = -\\frac{2Q}{\\omega_0}(\\omega_{\\text{osc}} - \\omega_0)$$\n\nEquating the two expressions gives the large-signal oscillation frequency:\n$$\\frac{2Q}{\\omega_0}(\\omega_{\\text{osc}} - \\omega_0) = \\pm \\frac{I_1}{I_{SS}}$$\n\n$$\\boxed{\\omega_{\\text{osc}} \\approx \\omega_0 \\left( 1 \\pm \\frac{1}{2Q}\\frac{I_1}{I_{SS}} \\right) = \\frac{1}{\\sqrt{LC}} \\pm \\frac{1}{2 R_p C}\\frac{I_1}{I_{SS}}}$$",
        "format": "markdown",
        "sha256": "875d6420de1dd8a1cd2120bed868cff7fde95c01bbc36958c5f348d05957877a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the tank resonance and the correct coupling-induced shift, Δω ≈ (I1/ISS)ω0/(2Q), including the equivalent RpC form. The additional small-signal gm/(2C) expression is derived with the edge-of-oscillation condition gmRp = 1, so it does not replace or contradict the general estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 5682,
        "total_tokens": 6818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4037,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 5682,
        "total_tokens": 6818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4037,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    }
  ]
}
