{
  "model_key": "gemma_4_31b_it",
  "display_name": "Gemma 4 31B IT",
  "provider": "google",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "Gemma 4 31B IT answered the 50 tasks in three rollouts through OpenRouter's chat completions route (google/gemma-4-31b-it) at maximum reasoning effort. Requests set temperature to 0 and max_tokens to 16,384, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Gemma 4 31B IT on 2026-11-10 ($0.20 input, $0.20 cached input, $0.40 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 47,
          "incorrect_count": 103,
          "partial_credit_count": 67,
          "zero_count": 36,
          "mean_score_0_to_4": 2.06,
          "score_percent": 51.5,
          "score_distribution": {
            "0": 36,
            "1": 31,
            "2": 18,
            "3": 18,
            "4": 47
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 47,
          "incorrect_count": 103,
          "partial_credit_count": 67,
          "zero_count": 36,
          "mean_score_0_to_4": 2.06,
          "score_percent": 51.5,
          "score_distribution": {
            "0": 36,
            "1": 31,
            "2": 18,
            "3": 18,
            "4": 47
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 41,
          "incorrect_count": 49,
          "partial_credit_count": 23,
          "zero_count": 26,
          "mean_score_0_to_4": 2.2555555555555555,
          "score_percent": 56.388888888888886,
          "score_distribution": {
            "0": 26,
            "1": 12,
            "2": 6,
            "3": 5,
            "4": 41
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 41,
          "incorrect_count": 49,
          "partial_credit_count": 23,
          "zero_count": 26,
          "mean_score_0_to_4": 2.2555555555555555,
          "score_percent": 56.388888888888886,
          "score_distribution": {
            "0": 26,
            "1": 12,
            "2": 6,
            "3": 5,
            "4": 41
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 6,
          "incorrect_count": 54,
          "partial_credit_count": 44,
          "zero_count": 10,
          "mean_score_0_to_4": 1.7666666666666666,
          "score_percent": 44.166666666666664,
          "score_distribution": {
            "0": 10,
            "1": 19,
            "2": 12,
            "3": 13,
            "4": 6
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 6,
          "incorrect_count": 54,
          "partial_credit_count": 44,
          "zero_count": 10,
          "mean_score_0_to_4": 1.7666666666666666,
          "score_percent": 44.166666666666664,
          "score_distribution": {
            "0": 10,
            "1": 19,
            "2": 12,
            "3": 13,
            "4": 6
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 17,
        "incorrect_count": 33,
        "partial_credit_count": 22,
        "zero_count": 11,
        "mean_score_0_to_4": 2.2,
        "score_percent": 55.00000000000001,
        "score_distribution": {
          "0": 11,
          "1": 9,
          "2": 6,
          "3": 7,
          "4": 17
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 15,
        "incorrect_count": 35,
        "partial_credit_count": 23,
        "zero_count": 12,
        "mean_score_0_to_4": 1.88,
        "score_percent": 47.0,
        "score_distribution": {
          "0": 12,
          "1": 15,
          "2": 5,
          "3": 3,
          "4": 15
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 15,
        "incorrect_count": 35,
        "partial_credit_count": 22,
        "zero_count": 13,
        "mean_score_0_to_4": 2.1,
        "score_percent": 52.5,
        "score_distribution": {
          "0": 13,
          "1": 7,
          "2": 7,
          "3": 8,
          "4": 15
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 256,
        "input_tokens": 42237,
        "output_tokens": 552910,
        "total_tokens": 595147
      },
      "known_totals": {
        "cached_input_tokens": 256,
        "input_tokens": 42237,
        "output_tokens": 552910,
        "total_tokens": 595147
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 16,
          "incorrect_count": 14,
          "partial_credit_count": 7,
          "zero_count": 7,
          "mean_score_0_to_4": 2.5,
          "score_percent": 62.5,
          "score_distribution": {
            "0": 7,
            "1": 4,
            "2": 2,
            "3": 1,
            "4": 16
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 12,
          "incorrect_count": 18,
          "partial_credit_count": 10,
          "zero_count": 8,
          "mean_score_0_to_4": 2.066666666666667,
          "score_percent": 51.66666666666667,
          "score_distribution": {
            "0": 8,
            "1": 7,
            "2": 2,
            "3": 1,
            "4": 12
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 13,
          "incorrect_count": 17,
          "partial_credit_count": 6,
          "zero_count": 11,
          "mean_score_0_to_4": 2.2,
          "score_percent": 55.00000000000001,
          "score_distribution": {
            "0": 11,
            "1": 1,
            "2": 2,
            "3": 3,
            "4": 13
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 1,
          "incorrect_count": 19,
          "partial_credit_count": 15,
          "zero_count": 4,
          "mean_score_0_to_4": 1.75,
          "score_percent": 43.75,
          "score_distribution": {
            "0": 4,
            "1": 5,
            "2": 4,
            "3": 6,
            "4": 1
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 3,
          "incorrect_count": 17,
          "partial_credit_count": 13,
          "zero_count": 4,
          "mean_score_0_to_4": 1.6,
          "score_percent": 40.0,
          "score_distribution": {
            "0": 4,
            "1": 8,
            "2": 3,
            "3": 2,
            "4": 3
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 2,
          "incorrect_count": 18,
          "partial_credit_count": 16,
          "zero_count": 2,
          "mean_score_0_to_4": 1.95,
          "score_percent": 48.75,
          "score_distribution": {
            "0": 2,
            "1": 6,
            "2": 5,
            "3": 5,
            "4": 2
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, the **intrinsic gain doubles**.\n\nHere is the step-by-step technical breakdown of why this happens.\n\n### 1. The Formula for Intrinsic Gain\nThe intrinsic gain ($A_v$) of a MOSFET is the maximum voltage gain a single transistor can provide. It is defined as the product of the transconductance ($g_m$) and the output resistance ($r_{out}$):\n$$A_v = g_m \\cdot r_{out}$$\n\n### 2. Effect on Transconductance ($g_m$)\nTransconductance represents how effectively the gate voltage controls the drain current. In the saturation region, it is given by:\n$$g_m = \\mu C_{ox} \\frac{W}{L} (V_{GS} - V_{th})$$\n*   **The Change:** You are doubling $W$ ($2W$) and doubling $L$ ($2L$).\n*   **The Result:** The ratio $\\frac{W}{L}$ remains unchanged ($\\frac{2W}{2L} = \\frac{W}{L}$).\n*   **Conclusion:** Assuming the overdrive voltage $(V_{GS} - V_{th})$ remains constant, **$g_m$ remains unchanged.**\n\n### 3. Effect on Output Resistance ($r_{out}$)\nThe output resistance is primarily determined by Channel Length Modulation (CLM). It is expressed as:\n$$r_{out} \\approx \\frac{1}{\\lambda I_D}$$\nWhere $\\lambda$ is the channel length modulation coefficient and $I_D$ is the drain current.\n\n*   **The Drain Current ($I_D$):** Since $I_D = \\frac{1}{2} \\mu C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$, and the ratio $W/L$ is constant, **$I_D$ remains unchanged.**\n*   **The $\\lambda$ Coefficient:** The channel length modulation effect is inversely proportional to the length of the channel. As the channel gets longer, the relative impact of the depletion region at the drain is smaller. Mathematically:\n    $$\\lambda \\propto \\frac{1}{L}$$\n    If you double $L$, $\\lambda$ is halved ($\\lambda \\to \\frac{\\lambda}{2}$).\n*   **The Result:** Since $r_{out} = \\frac{1}{\\lambda I_D}$, if $\\lambda$ is halved and $I_D$ is constant, **$r_{out}$ doubles.**\n\n### 4. Final Calculation\nPlugging these results back into the intrinsic gain formula:\n$$A_{v(new)} = g_{m(unchanged)} \\cdot r_{out(doubled)}$$\n$$A_{v(new)} = 2 \\cdot (g_m \\cdot r_{out}) = 2 \\cdot A_{v(old)}$$\n\n### Summary Table\n| Parameter | Change | Effect |\n| :--- | :--- | :--- |\n| **Aspect Ratio ($W/L$)** | $2W / 2L$ | No Change |\n| **Transconductance ($g_m$)** | $\\propto W/L$ | No Change |\n| **Drain Current ($I_D$)** | $\\propto W/L$ | No Change |\n| **CLM Coefficient ($\\lambda$)** | $\\propto 1/L$ | Halved |\n| **Output Resistance ($r_{out}$)** | $\\propto 1/\\lambda$ | **Doubled** |\n| **Intrinsic Gain ($A_v$)** | $g_m \\cdot r_{out}$ | **Doubled** |",
        "format": "markdown",
        "sha256": "1329ee4ce183f7d2ff1ff293d1a51ccdf2b0cde85c6087da71fb164007ce87b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that with constant overdrive, doubling both dimensions leaves W/L, gm, and ID approximately unchanged, while the longer channel reduces λ and roughly doubles ro, so intrinsic gain roughly doubles.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 2123,
        "total_tokens": 2157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 2123,
        "total_tokens": 2157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, its intrinsic gain **doubles**.\n\nHere is the step-by-step technical explanation of why this happens.\n\n### 1. Definition of Intrinsic Gain\nThe intrinsic gain ($A_v$) of a MOSFET is the maximum achievable voltage gain, defined as the product of its transconductance ($g_m$) and its output resistance ($r_{out}$):\n$$A_v = g_m \\cdot r_{out}$$\n\n### 2. Effect on Transconductance ($g_m$)\nTransconductance represents how effectively the gate voltage controls the drain current. In the saturation region, $g_m$ is given by:\n$$g_m = \\sqrt{2\\mu C_{ox} \\frac{W}{L} I_D}$$\n*   **The $W/L$ Ratio:** If you double $W$ and double $L$, the ratio $\\frac{W}{L}$ remains **constant**.\n*   **The Current ($I_D$):** Assuming the bias voltage ($V_{GS}$) remains the same, the drain current $I_D$ also remains constant because it depends on the $W/L$ ratio.\n*   **Result:** Since both $W/L$ and $I_D$ are unchanged, **$g_m$ remains the same.**\n\n### 3. Effect on Output Resistance ($r_{out}$)\nThe output resistance is primarily determined by Channel Length Modulation (CLM). It is expressed as:\n$$r_{out} \\approx \\frac{1}{\\lambda I_D}$$\nWhere $\\lambda$ is the channel length modulation coefficient. A critical property of $\\lambda$ is that it is **inversely proportional to the channel length**:\n$$\\lambda \\propto \\frac{1}{L}$$\n*   When you double the length ($L \\to 2L$), the value of $\\lambda$ is halved ($\\lambda \\to \\lambda/2$).\n*   Because $r_{out}$ is inversely proportional to $\\lambda$, halving $\\lambda$ results in **doubling the output resistance** ($r_{out} \\to 2r_{out}$).\n\n### 4. Final Calculation\nNow, we plug these results back into the intrinsic gain formula:\n$$A_{v(new)} = g_{m(same)} \\cdot r_{out(doubled)}$$\n$$A_{v(new)} = 1 \\cdot 2 \\cdot A_{v(old)} = 2 A_{v(old)}$$\n\n### Summary Table\n| Parameter | Change | Effect |\n| :--- | :--- | :--- |\n| **Aspect Ratio ($W/L$)** | $2W / 2L$ | No Change |\n| **Transconductance ($g_m$)** | $\\propto \\sqrt{W/L}$ | No Change |\n| **Channel Length Mod. ($\\lambda$)** | $\\propto 1/L$ | Halved ($\\times 0.5$) |\n| **Output Resistance ($r_{out}$)** | $\\propto 1/\\lambda$ | Doubled ($\\times 2$) |\n| **Intrinsic Gain ($A_v$)** | $g_m \\cdot r_{out}$ | **Doubled ($\\times 2$)** |",
        "format": "markdown",
        "sha256": "b6d5fa397e2cdfaa77329566b98a6b8481ed022a39e41402847e83afd074a063"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with fixed overdrive, doubling both dimensions leaves W/L, current, and gm approximately unchanged while the longer channel roughly halves λ and doubles ro. The stated fixed-VGS assumption captures the relevant bias condition.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 1581,
        "total_tokens": 1614,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 867,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 1581,
        "total_tokens": 1614,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 867,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, the **intrinsic gain doubles.**\n\nHere is the step-by-step technical derivation to explain why.\n\n### 1. The Formula for Intrinsic Gain\nThe intrinsic gain ($A_v$) of a MOSFET is the maximum gain it can achieve as a common-source amplifier, defined as the product of its transconductance ($g_m$) and its output resistance ($r_o$):\n$$A_v = g_m \\cdot r_o$$\n\n### 2. Effect on Transconductance ($g_m$)\nThe transconductance in the saturation region can be expressed in several ways. The most common is:\n$$g_m = \\sqrt{2\\mu C_{ox} \\frac{W}{L} I_D}$$\nOr, in terms of overdrive voltage ($V_{OV} = V_{GS} - V_{th}$):\n$$g_m = \\frac{\\mu C_{ox} W}{L} V_{OV}$$\n\nIn both formulas, $g_m$ depends on the **aspect ratio ($W/L$)**. If you double both $W$ and $L$:\n$$\\frac{2W}{2L} = \\frac{W}{L}$$\nBecause the ratio remains constant, **$g_m$ remains unchanged** (assuming the drain current $I_D$ or the overdrive voltage $V_{OV}$ is kept constant).\n\n### 3. Effect on Output Resistance ($r_o$)\nThe output resistance is caused by Channel Length Modulation. It is defined as:\n$$r_o = \\frac{1}{\\lambda I_D}$$\nWhere $\\lambda$ is the channel length modulation coefficient. A fundamental property of $\\lambda$ is that it is **inversely proportional to the channel length**:\n$$\\lambda \\propto \\frac{1}{L}$$\nTherefore, if you double the length ($L \\to 2L$), the coefficient $\\lambda$ is halved ($\\lambda \\to \\frac{1}{2}\\lambda$). \n\nLooking back at the $r_o$ formula:\n$$r_{o(new)} = \\frac{1}{(\\frac{1}{2}\\lambda) I_D} = 2 \\cdot \\frac{1}{\\lambda I_D} = 2r_o$$\nSo, **doubling the length doubles the output resistance.**\n\n### 4. Final Calculation\nNow, we plug these results back into the intrinsic gain formula:\n$$A_{v(new)} = g_{m(new)} \\cdot r_{o(new)}$$\n$$A_{v(new)} = (g_m) \\cdot (2r_o)$$\n$$A_{v(new)} = 2 \\cdot (g_m r_o) = 2 A_v$$\n\n### Summary Table\n| Parameter | Change | Effect |\n| :--- | :--- | :--- |\n| **Aspect Ratio ($W/L$)** | $2W / 2L$ | No Change |\n| **Transconductance ($g_m$)** | $\\propto W/L$ | No Change |\n| **Channel Length Mod. ($\\lambda$)** | $\\propto 1/L$ | Halved |\n| **Output Resistance ($r_o$)** | $\\propto 1/\\lambda$ | **Doubled** |\n| **Intrinsic Gain ($A_v$)** | $g_m \\cdot r_o$ | **Doubled** |",
        "format": "markdown",
        "sha256": "e750694fc0f3614cc4f99d73e8f12feb51973ac971ce502d487521c7fa65f940"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: doubling both dimensions preserves W/L and gm at the stated bias, while the longer channel approximately halves λ and doubles ro. The assumptions are consistent with the golden solution.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 1742,
        "total_tokens": 1775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 1742,
        "total_tokens": 1775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct.**\n\nHere is the detailed explanation based on the physics of a MOSFET operating in the **saturation region**.\n\n### 1. The Mathematical Derivation\nThe drain current ($I_D$) of a MOSFET in saturation is given by the formula:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n\nThe term $(V_{GS} - V_{th})$ is defined as the **overdrive voltage** ($V_{OV}$). So, we can rewrite the equation as:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} V_{OV}^2$$\n\nTransconductance ($g_m$) is defined as the rate of change of the drain current with respect to the gate-source voltage:\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}}$$\n\nBy taking the derivative of the current equation with respect to $V_{GS}$ (or $V_{OV}$), we get:\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$$\n\n### 2. Analysis\nLooking at the resulting formula:\n$$g_m \\propto V_{OV}$$\n\nBecause $g_m$ is directly proportional to the overdrive voltage, **as $V_{OV}$ increases, $g_m$ also increases.**\n\n### 3. Intuitive Explanation\nTransconductance represents how effectively the gate voltage can control the drain current. When you increase the overdrive voltage, you are increasing the density of the inversion layer (the \"channel\") under the gate. A stronger channel allows the device to respond more aggressively to small changes in gate voltage, resulting in a higher $g_m$.\n\n***\n\n**Note on a common point of confusion:**\nStudent B might be thinking of the relationship between $g_m$ and $V_{OV}$ **when the drain current ($I_D$) is held constant**. \n\nIf you rewrite the $g_m$ formula in terms of current:\n$$g_m = \\frac{2 I_D}{V_{OV}}$$\nIn this specific scenario, if you keep $I_D$ fixed but increase $V_{OV}$ (which would require decreasing the $W/L$ ratio), the $g_m$ would indeed go down. However, in a standard context where the device dimensions are fixed, increasing the overdrive voltage always increases the transconductance.",
        "format": "markdown",
        "sha256": "dcc535f97036a2af7f7ea03a4a6a6ea9e71f1316e7c9660c6a164a7e6d5c15b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size and derives that gm increases linearly with VOV. It also accurately explains that Student B’s conclusion applies when ID is held fixed and W/L changes.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 44,
        "output_tokens": 1367,
        "total_tokens": 1411,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 817,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 44,
        "output_tokens": 1367,
        "total_tokens": 1411,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 817,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct.**\n\nHere is the mathematical and physical explanation why:\n\n### 1. The Mathematical Derivation\nTo find the transconductance ($g_m$), we look at the drain current equation for a MOSFET operating in the **saturation region**:\n\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n\nThe **overdrive voltage** ($V_{OV}$) is defined as:\n$$V_{OV} = V_{GS} - V_{th}$$\n\nSubstituting $V_{OV}$ into the current equation:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} V_{OV}^2$$\n\nTransconductance ($g_m$) is defined as the derivative of the drain current with respect to the gate-source voltage:\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\frac{\\partial I_D}{\\partial V_{OV}}$$\n\nTaking the derivative of the $I_D$ equation with respect to $V_{OV}$:\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$$\n\n### 2. Conclusion\nLooking at the resulting formula ($g_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$), it is clear that **$g_m$ is directly proportional to the overdrive voltage**. \n\n*   As $V_{OV}$ increases (by increasing $V_{GS}$), the transconductance $g_m$ **increases**.\n*   Therefore, **Student A is correct**.\n\n***\n\n**Note on potential confusion:**\nStudent B might be confused if they are thinking about $g_m$ in terms of a **fixed drain current ($I_D$)**. If you keep $I_D$ constant but increase $V_{OV}$ (which would require decreasing the $W/L$ ratio), the $g_m$ would indeed decrease. However, in a standard context where the device dimensions are fixed and you are simply increasing the gate voltage, $g_m$ always increases as $V_{OV}$ increases.",
        "format": "markdown",
        "sha256": "b72820ad9443763d5abaf9e5d7f1b8c03467ac6b348cbc902a49b3f02f8c6015"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed device dimensions, derives that gm increases linearly with overdrive under the saturation square-law model, and appropriately notes Student B's fixed-current condition.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 44,
        "output_tokens": 1326,
        "total_tokens": 1370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 838,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 44,
        "output_tokens": 1326,
        "total_tokens": 1370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 838,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The answer depends on what is being held constant, but in the standard context of a single MOSFET device, **Student A is correct.**\n\nHere is the detailed breakdown of why, as well as the specific scenario where Student B would be correct.\n\n### 1. Why Student A is Correct (Fixed Device Dimensions)\nIf you have a specific MOSFET (meaning the width $W$ and length $L$ are fixed) and you increase the overdrive voltage ($V_{OV} = V_{GS} - V_{th}$) by increasing the gate voltage, the transconductance increases.\n\nThe formula for transconductance ($g_m$) in the saturation region is:\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th}) = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$$\n\nIn this equation:\n*   $\\mu_n$ (mobility), $C_{ox}$ (oxide capacitance), and $W/L$ (aspect ratio) are constants for a given transistor.\n*   Therefore, **$g_m$ is directly proportional to $V_{OV}$**. \n\nAs you increase the overdrive voltage, you increase the strength of the inversion layer, allowing the gate to have a greater effect on the drain current for a given change in voltage. Thus, **$g_m$ goes up.**\n\n---\n\n### 2. When Student B would be Correct (Fixed Drain Current)\nStudent B is likely thinking about a **design trade-off** where the drain current ($I_D$) is held constant. In analog IC design, engineers often have a \"current budget.\" If you want to increase the overdrive voltage while keeping the current the same, you must decrease the size ($W/L$) of the transistor.\n\nThe relationship between $g_m$, $I_D$, and $V_{OV}$ is:\n$$g_m = \\frac{2 I_D}{V_{OV}}$$\n\nIn this specific scenario:\n*   If $I_D$ is held **constant**, then $g_m$ is inversely proportional to $V_{OV}$.\n*   Increasing $V_{OV}$ (by shrinking the transistor) will cause **$g_m$ to go down.**\n\n### Summary\n*   **Student A** is talking about the **physics of a single device**: \"If I turn up the voltage on this transistor, does it become more transconductive?\" $\\rightarrow$ **Yes.**\n*   **Student B** is talking about **circuit design trade-offs**: \"If I have a fixed amount of current, does increasing the overdrive voltage (via sizing) reduce my gain?\" $\\rightarrow$ **Yes.**\n\nIn a standard textbook or exam question, unless \"constant current\" is explicitly mentioned, **Student A is the correct answer.**",
        "format": "markdown",
        "sha256": "759e740537204b679d850ad8f3bbfe12e9794ceabf568a3a16957180630745cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A for fixed W/L, derives that gm increases with VOV, and explains Student B’s inverse relationship applies only when ID is held constant.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 45,
        "output_tokens": 1984,
        "total_tokens": 2029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1375,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 45,
        "output_tokens": 1984,
        "total_tokens": 2029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1375,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is: **Yes, the structure of the small-signal model is identical, but the parameters (the values) are different.**\n\nIn small-signal analysis, we are looking at the **linearized behavior** of the device around a specific DC operating point (the Q-point). Because both NMOS and PMOS devices are voltage-controlled current sources, their mathematical representation of \"change\" is the same.\n\nHere is the detailed breakdown of why they are considered identical in structure and where they differ in practice.\n\n---\n\n### 1. The Structural Identity\nIf you draw the small-signal model (the hybrid-$\\pi$ model) for both an NMOS and a PMOS, you will draw the exact same circuit:\n*   **A voltage-controlled current source ($g_m v_{gs}$):** This represents how a change in gate-to-source voltage ($\\Delta V_{GS}$) causes a change in drain current ($\\Delta I_D$).\n*   **An output resistance ($r_o$):** This represents channel length modulation (the slope of the $I_D$ vs $V_{DS}$ curve).\n*   **Capacitances ($C_{gs}, C_{gd}$):** If doing high-frequency analysis, the parasitic capacitors are placed in the same locations.\n\nIn a small-signal diagram, we deal with **perturbations** (small changes). Whether the actual DC current is flowing from Drain to Source (NMOS) or Source to Drain (PMOS) does not matter; the relationship between a small change in input voltage and a small change in output current is functionally the same.\n\n### 2. Where They Differ (The Parameters)\nWhile the \"blueprint\" is the same, the actual values you plug into the model differ significantly due to the physics of the semiconductors:\n\n#### A. Carrier Mobility ($\\mu$)\nThis is the most significant difference. NMOS devices use electrons, while PMOS devices use holes.\n*   **Electrons have much higher mobility than holes** ($\\mu_n \\approx 2\\text{ to }3 \\times \\mu_p$).\n*   Because transconductance $g_m$ is proportional to mobility ($\\mu$), an NMOS device will have a much higher $g_m$ than a PMOS device of the same size ($W/L$) and the same overdrive voltage.\n\n#### B. Threshold Voltage ($V_{th}$)\n*   For an NMOS, $V_{th}$ is typically positive (the gate must be higher than the source to turn on).\n*   For a PMOS, $V_{th}$ is typically negative (the gate must be lower than the source to turn on).\n*   In small-signal analysis, we use the **overdrive voltage** $(V_{GS} - V_{th})$. While the signs are opposite, the resulting $g_m$ value used in the model is always treated as a positive magnitude.\n\n#### C. Physical Implementation\nIn a real circuit:\n*   **NMOS** is typically used as a \"pull-down\" device (connected to Ground).\n*   **PMOS** is typically used as a \"pull-up\" device (connected to $V_{DD}$).\n\n### Summary Table\n\n| Feature | NMOS Small-Signal Model | PMOS Small-Signal Model | Comparison |\n| :--- | :--- | :--- | :--- |\n| **Model Topology** | $g_m v_{gs}$ source + $r_o$ resistor | $g_m v_{gs}$ source + $r_o$ resistor | **Identical** |\n| **Transconductance ($g_m$)** | High (due to $\\mu_n$) | Low (due to $\\mu_p$) | **Different** |\n| **Output Resistance ($r_o$)** | $\\frac{1}{\\lambda I_D}$ | $\\frac{1}{\\lambda I_D}$ | **Same Formula** |\n| **Input Voltage** | $v_{gs}$ (perturbation) | $v_{gs}$ (perturbation) | **Identical** |\n\n**Conclusion:** If you are solving a circuit problem, you can use the exact same equations and circuit diagrams for both. You only need to be careful when calculating the specific value of $g_m$ for the PMOS, as you must use the hole mobility ($\\mu_p$) and the correct PMOS biasing voltages.",
        "format": "markdown",
        "sha256": "2b8da4d94e825c544140d42362ab742d5057fc062799cb2ebb1114621ad20299"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model. The golden solution explicitly awards full credit for this, even without explaining polarity conventions.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 1616,
        "total_tokens": 1652,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 671,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 1616,
        "total_tokens": 1652,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 671,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is **yes**, the **structure and mathematical form** of the small-signal model for a PMOS device are identical to those of an NMOS device.\n\nHowever, while the *model* is the same, the **parameters** (the actual numbers) and the **DC biasing** required to reach that model are different.\n\nHere is the detailed breakdown of why they are considered identical and where they actually differ.\n\n---\n\n### 1. Why the Models are Identical\nSmall-signal analysis is the study of **perturbations** (small changes) around a fixed DC operating point (the Q-point). Because both NMOS and PMOS devices are voltage-controlled current sources, their linear approximation is the same.\n\nIn the saturation region, both devices are modeled as:\n*   **A Voltage-Controlled Current Source:** The drain current change ($\\Delta i_d$) is proportional to the gate-source voltage change ($\\Delta v_{gs}$). This is represented by the transconductance:\n    $$\\Delta i_d = g_m \\Delta v_{gs}$$\n*   **An Output Resistance:** Due to channel length modulation, there is a resistance ($r_o$) in parallel with the current source:\n    $$r_o = \\frac{1}{\\lambda I_D}$$\n\nWhether the device is NMOS or PMOS, the small-signal circuit consists of a current source $g_m v_{gs}$ in parallel with a resistor $r_o$ connected between the drain and the source.\n\n### 2. The Key Differences (The \"Fine Print\")\nWhile the circuit diagram looks the same, the physics behind the variables differ:\n\n#### A. Carrier Mobility ($\\mu$)\nThe transconductance $g_m$ is defined as:\n$$g_m = \\mu C_{ox} \\frac{W}{L} (V_{GS} - V_{th})$$\nBecause electrons (NMOS) have significantly higher mobility than holes (PMOS)—typically $\\mu_n \\approx 2\\text{ to }3 \\times \\mu_p$—an NMOS device will have a much higher $g_m$ than a PMOS device of the same physical size and bias voltage. To get the same $g_m$ from a PMOS, you usually have to make the device wider ($W$).\n\n#### B. DC Bias Polarities\nThe small-signal model is only valid if the device is biased correctly in the DC domain:\n*   **NMOS:** Requires a **positive** $V_{GS}$ (relative to the source) to create a channel.\n*   **PMOS:** Requires a **negative** $V_{GS}$ (relative to the source) to create a channel.\n\n#### C. Current Direction\nIn DC analysis, current flows from Drain to Source in NMOS and Source to Drain in PMOS. However, in **small-signal analysis**, we use $\\Delta i_d$. We define the current flowing *into* the drain as positive for both. Because the small-signal model deals with the *change* in current, the directionality of the DC flow is absorbed into the sign of the variables.\n\n### Summary Table\n\n| Feature | NMOS Small-Signal | PMOS Small-Signal | Comparison |\n| :--- | :--- | :--- | :--- |\n| **Model Structure** | $g_m v_{gs}$ source $\\parallel$ $r_o$ | $g_m v_{gs}$ source $\\parallel$ $r_o$ | **Identical** |\n| **Equation** | $i_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}$ | $i_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}$ | **Identical** |\n| **Typical $g_m$** | Higher (due to $\\mu_n$) | Lower (due to $\\mu_p$) | **Different** |\n| **DC Bias** | $V_{GS} > V_{thn}$ | $V_{GS} < V_{thp}$ | **Opposite** |",
        "format": "markdown",
        "sha256": "63afb57886c4ed2f0bb2ca91594382ea66d0b202ed16961ff6b76bd72ae1e0c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer correctly states that the PMOS small-signal model has the same structure and form as the NMOS model, which earns full credit under the golden solution’s explicit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 1695,
        "total_tokens": 1731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 1695,
        "total_tokens": 1731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is: **Topologically, yes; numerically and conventionally, no.**\n\nIn terms of the **circuit diagram** used for small-signal analysis, the models are identical. However, the **parameters** (the values of the components) and the **polarities** (the direction of current and voltage) differ because of the underlying physics of the devices.\n\nHere is the detailed breakdown:\n\n### 1. Topological Identity (The \"Same\" Part)\nIf you look at a small-signal equivalent circuit for a MOSFET in the saturation region, both NMOS and PMOS are represented by the same basic components:\n*   **A Voltage-Controlled Current Source:** This represents the transconductance ($g_m$), where the current is $i_d = g_m v_{gs}$.\n*   **An Output Resistance ($r_o$):** A resistor in parallel with the current source that accounts for channel length modulation.\n*   **Capacitances:** $C_{gs}$ and $C_{gd}$ are present in both for high-frequency models.\n\nBecause small-signal analysis deals with **perturbations** (small changes $\\Delta V$ and $\\Delta I$) around a DC bias point, the linear approximation looks the same for both devices.\n\n---\n\n### 2. The Differences (The \"Not Identical\" Part)\n\nWhile the \"drawing\" is the same, the physics creates three major differences:\n\n#### A. Carrier Mobility ($\\mu$) and $g_m$\nThe transconductance $g_m$ is defined as:\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}} \\approx \\mu C_{ox} \\frac{W}{L} (V_{GS} - V_{th})$$\n*   **NMOS** uses electrons, which have high mobility ($\\mu_n$).\n*   **PMOS** uses holes, which have significantly lower mobility ($\\mu_p$).\n*   **Result:** For the same physical dimensions ($W/L$) and the same overdrive voltage, an NMOS will have a much higher $g_m$ than a PMOS. To make a PMOS match the $g_m$ of an NMOS, you typically have to make the PMOS much wider.\n\n#### B. Polarity and Convention\nThis is where most students get confused. \n*   **NMOS:** The gate-to-source voltage $V_{GS}$ must be **positive** to turn the device on. The current flows from **Drain to Source**.\n*   **PMOS:** The gate-to-source voltage $V_{GS}$ must be **negative** (or $V_{SG}$ must be positive) to turn the device on. The current flows from **Source to Drain**.\n\nIn a small-signal model, we use lowercase letters ($v_{gs}, i_d$). Because we are dealing with changes, the \"sign\" is handled by the direction of the arrows in the circuit. If you define $v_{gs}$ as $v_g - v_s$ for both, the PMOS current source will effectively act in the opposite direction relative to the DC flow.\n\n#### C. Threshold Voltage ($V_{th}$)\n*   $V_{thn}$ is typically positive.\n*   $V_{thp}$ is typically negative.\nThis affects the DC bias point, which in turn determines the value of $g_m$ and $r_o$ used in the small-signal model.\n\n### Summary Table\n\n| Feature | NMOS Small-Signal Model | PMOS Small-Signal Model |\n| :--- | :--- | :--- |\n| **Circuit Topology** | $g_m v_{gs}$ source $\\parallel$ $r_o$ | $g_m v_{gs}$ source $\\parallel$ $r_o$ |\n| **Carrier** | Electrons (Fast) | Holes (Slow) |\n| **Typical $g_m$** | Higher | Lower (for same size) |\n| **DC Current Direction** | Drain $\\to$ Source | Source $\\to$ Drain |\n| **Control Voltage** | $V_{GS} > V_{thn}$ | $V_{GS} < V_{thp}$ |",
        "format": "markdown",
        "sha256": "4137f3d4e305359d37faa36cded3546e8e2cd069e2ab734e3d0354c8cf39528f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS and NMOS small-signal models have the same topology and components, while noting the polarity and sign-convention differences. This satisfies the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 1617,
        "total_tokens": 1653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 708,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36,
        "output_tokens": 1617,
        "total_tokens": 1653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 708,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the $I_X$ versus $V_X$ characteristic for the given circuit, we need to analyze the operation of the MOSFET $M_1$.\n\n### 1. Circuit Analysis\n* **Configuration:** The MOSFET $M_1$ is \"diode-connected\" because its gate is connected directly to its drain.\n* **Voltages:** Let $V_{GS}$ be the gate-to-source voltage and $V_{DS}$ be the drain-to-source voltage. Since the gate and drain are tied together and the source is grounded:\n  $$V_{GS} = V_{DS} = V_X$$\n* **Current:** The current $I_X$ flowing from the source $V_X$ is the drain current $I_D$ of the MOSFET:\n  $$I_X = I_D$$\n\n### 2. Operating Regions\nAn n-channel MOSFET operates in different regions based on the applied voltages:\n\n* **Cut-off Region:** If $V_{GS} < V_{th}$ (where $V_{th}$ is the threshold voltage), the transistor is off.\n  $$\\text{For } V_X < V_{th}, \\quad I_X = 0$$\n* **Saturation Region:** A MOSFET is in saturation if $V_{DS} \\ge V_{GS} - V_{th}$. \n  Substituting our values: $V_X \\ge V_X - V_{th}$, which simplifies to $V_{th} \\ge 0$. \n  Since $V_{th}$ is positive for a standard enhancement-mode NMOS, the device enters saturation as soon as it turns on ($V_X \\ge V_{th}$). The current is given by the square-law equation:\n  $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2 = \\frac{1}{2} k' \\frac{W}{L} (V_X - V_{th})^2$$\n  This shows that $I_X$ increases quadratically with $V_X$.\n* **Linear (Triode) Region:** This region occurs when $V_{DS} < V_{GS} - V_{th}$. In this circuit, that would require $V_X < V_X - V_{th}$, or $V_{th} < 0$, which is not the case for a standard NMOS. Therefore, the device **never enters the linear region**.\n\n### 3. Sketching the Graph\nThe resulting $I_X$ vs $V_X$ curve looks like a \"half-parabola\" shifted to the right by $V_{th}$:\n\n1. **X-axis:** $V_X$ (Voltage)\n2. **Y-axis:** $I_X$ (Current)\n3. **From $V_X = 0$ to $V_X = V_{th}$:** The current $I_X$ remains at $0$.\n4. **For $V_X > V_{th}$:** The current $I_X$ rises quadratically, following the curve of $(V_X - V_{th})^2$.\n\n**Visual Description of the Sketch:**\nImagine a graph where the line stays flat on the horizontal axis until it reaches a point $V_{th}$. From that point onward, it curves upward steeply, resembling the right side of a parabola.",
        "format": "markdown",
        "sha256": "e88ac822ef67e47492c166fc4fc2e9f67f02633d331ac400fa56af1f41162834"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its off region below threshold, and its saturation-mode quadratic current rise above threshold, matching the full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 1491,
        "total_tokens": 1785,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 743,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 1491,
        "total_tokens": 1785,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 743,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the $I_X$ versus $V_X$ characteristic for the given circuit, we need to analyze the operating state of the n-channel MOSFET ($M_1$).\n\n### 1. Circuit Analysis\nIn the provided circuit, the gate of the MOSFET is connected directly to its drain. This configuration is known as a **diode-connected MOSFET**. \n\nLet's define the key voltages:\n*   **Gate-to-Source Voltage ($V_{GS}$):** Since the gate is connected to the drain and the source is grounded, $V_{GS} = V_X$.\n*   **Drain-to-Source Voltage ($V_{DS}$):** Similarly, $V_{DS} = V_X$.\n\n### 2. Determining the Operating Region\nA MOSFET can operate in three main regions: cut-off, triode (linear), and saturation.\n\n*   **Cut-off Region:** The MOSFET is \"off\" if $V_{GS} < V_{th}$ (where $V_{th}$ is the threshold voltage).\n    *   In this case, if **$V_X < V_{th}$**, then **$I_X \\approx 0$**.\n*   **Saturation Region:** The MOSFET is in saturation if $V_{GS} \\ge V_{th}$ and $V_{DS} \\ge V_{GS} - V_{th}$.\n    *   Substituting our values: $V_X \\ge V_{th}$ and $V_X \\ge V_X - V_{th}$.\n    *   The second condition simplifies to $V_{th} \\ge 0$, which is true for standard enhancement-mode NMOS transistors.\n    *   Therefore, whenever the device is \"on\" ($V_X \\ge V_{th}$), it is **always in the saturation region**.\n*   **Triode Region:** This would require $V_{DS} < V_{GS} - V_{th}$, which simplifies to $V_X < V_X - V_{th}$, or $V_{th} < 0$. This is not possible for a standard enhancement-mode NMOS.\n\n### 3. The Current Equation\nIn the saturation region, the drain current $I_D$ (which is $I_X$ here) is given by the square-law equation:\n$$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\nSubstituting $V_{GS} = V_X$:\n$$I_X = \\frac{1}{2} k' \\frac{W}{L} (V_X - V_{th})^2 \\quad \\text{for } V_X \\ge V_{th}$$\n\n### 4. Sketching the Graph\nThe relationship between $I_X$ and $V_X$ is as follows:\n1.  **From $V_X = 0$ to $V_X = V_{th}$:** The current $I_X$ remains at zero.\n2.  **For $V_X > V_{th}$:** The current $I_X$ increases quadratically (following a parabolic curve) as $V_X$ increases.\n\n**The resulting sketch looks like this:**\n*   **X-axis:** $V_X$ (Voltage)\n*   **Y-axis:** $I_X$ (Current)\n*   The curve stays flat on the x-axis until it reaches $V_{th}$, then it curves upward steeply.\n\n$$\\text{Graph Shape: } \\quad \\underbrace{\\text{---}}_{\\text{0 to } V_{th}} \\nearrow \\text{ (Parabolic rise)}$$",
        "format": "markdown",
        "sha256": "1210a13ae0d5b1354c4700dfd711635782780ae229343a1b6be8e54d20cd11c9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS as off up to threshold and in saturation above threshold, where IX rises quadratically with VX.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 1731,
        "total_tokens": 2025,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 1731,
        "total_tokens": 2025,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the $I_X$ versus $V_X$ characteristic for the given circuit, we need to analyze the operating state of the MOSFET $M_1$.\n\n### 1. Circuit Analysis\n* **Configuration:** The MOSFET is \"diode-connected\" because its gate is connected to its drain.\n* **Voltages:** \n    * The source is grounded, so $V_S = 0\\text{V}$.\n    * The drain is connected to the voltage source $V_X$, so $V_D = V_X$.\n    * Since the gate is connected to the drain, $V_G = V_D = V_X$.\n    * Therefore, the gate-to-source voltage is $V_{GS} = V_X - 0 = V_X$, and the drain-to-source voltage is $V_{DS} = V_X - 0 = V_X$.\n\n### 2. Determining the Operating Region\nAn NMOS transistor operates in different regions based on $V_{GS}$ and $V_{DS}$:\n\n* **Cut-off Region:** If $V_{GS} < V_{th}$ (where $V_{th}$ is the threshold voltage), the transistor is off.\n  $$\\text{If } V_X < V_{th}, \\text{ then } I_X = 0$$\n* **Saturation Region:** If $V_{GS} \\ge V_{th}$ and $V_{DS} \\ge V_{GS} - V_{th}$.\n  Substituting our values: $V_X \\ge V_X - V_{th}$, which simplifies to $V_{th} \\ge 0$. Since the threshold voltage is positive for an enhancement-mode NMOS, this condition is **always satisfied** whenever the device is turned on.\n* **Triode (Linear) Region:** This occurs if $V_{DS} < V_{GS} - V_{th}$.\n  Substituting our values: $V_X < V_X - V_{th}$, which implies $V_{th} < 0$. This is not possible for a standard NMOS.\n\n**Conclusion:** The MOSFET is either in **cut-off** (when $V_X < V_{th}$) or in **saturation** (when $V_X \\ge V_{th}$).\n\n### 3. The Current Equation\nIn the saturation region, the drain current $I_D$ (which is $I_X$) is given by:\n$$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\nSubstituting $V_{GS} = V_X$:\n$$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{th})^2 \\quad \\text{for } V_X \\ge V_{th}$$\n\nThis is a **quadratic (parabolic)** relationship.\n\n### 4. Sketching the Graph\n* **X-axis:** $V_X$ (Voltage)\n* **Y-axis:** $I_X$ (Current)\n* **From $V_X = 0$ to $V_X = V_{th}$:** The current $I_X$ remains at $0$. The graph is a flat line along the x-axis.\n* **For $V_X > V_{th}$:** The current increases quadratically, creating a curve that bends upwards (a parabola).\n\n**Visual Description of the Sketch:**\nImagine a graph where the line stays flat on the horizontal axis until it hits a point labeled $V_{th}$. From that point forward, the line curves steeply upward like the right side of a parabola.",
        "format": "markdown",
        "sha256": "1143921b1d7a270fc0c286a2babb0491625023e3afb048d168e16d3d51567707"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its cutoff below threshold, saturation above threshold, and the resulting quadratic rise in current. This matches the full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1734,
        "total_tokens": 2027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1734,
        "total_tokens": 2027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the $I_X$ versus $V_X$ characteristic for the given circuit, we need to analyze the operation of the n-channel MOSFET ($M_1$).\n\n### 1. Circuit Analysis\n* **Input Voltage:** The gate-to-source voltage is $V_{GS} = V_X$ (since the source is grounded).\n* **Drain Voltage:** The drain-to-source voltage is fixed at $V_{DS} = 1\\text{ V}$.\n* **Output Current:** The current $I_X$ is the drain current $I_D$.\n\n### 2. Operating Regions of the MOSFET\nThe behavior of $I_X$ depends on the value of $V_X$ relative to the threshold voltage $V_{th}$ and the drain voltage $V_{DS}$.\n\n* **Cut-off Region ($V_X < V_{th}$):**\n  The transistor is off. No current flows.\n  $$I_X = 0$$\n\n* **Saturation Region ($V_{th} \\le V_X \\le V_{th} + V_{DS}$):**\n  Since $V_{DS} = 1\\text{ V}$, this region occurs when $V_{th} \\le V_X \\le V_{th} + 1\\text{ V}$. In this region, the current follows a square-law relationship:\n  $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{th})^2$$\n  The curve is a **parabola** starting from $V_X = V_{th}$.\n\n* **Linear (Triode) Region ($V_X > V_{th} + V_{DS}$):**\n  This occurs when $V_X > V_{th} + 1\\text{ V}$. The current is given by:\n  $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_{th})V_{DS} - \\frac{V_{DS}^2}{2} \\right]$$\n  Substituting $V_{DS} = 1\\text{ V}$:\n  $$I_X = \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{th} - 0.5)$$\n  In this region, $I_X$ increases **linearly** with $V_X$.\n\n### 3. Sketching the Curve\nWhen plotting $I_X$ (y-axis) against $V_X$ (x-axis):\n1. **From $0$ to $V_{th}$:** The line stays flat on the x-axis ($I_X = 0$).\n2. **From $V_{th}$ to $V_{th} + 1\\text{ V}$:** The curve rises quadratically (concave up).\n3. **Beyond $V_{th} + 1\\text{ V}$:** The curve transitions smoothly into a straight line with a constant positive slope.\n\n**Summary of the graph shape:**\n* **$V_X < V_{th}$:** Flat line at $0$.\n* **$V_{th} < V_X < V_{th} + 1\\text{ V}$:** Parabolic increase.\n* **$V_X > V_{th} + 1\\text{ V}$:** Linear increase.",
        "format": "markdown",
        "sha256": "21fc8cfca9cc6e8e934623fe7a00f00eb1da254f441bedc9abe68ea9513b39ac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions, with the quadratic rise through Vth + 1 V and roughly linear rise beyond it.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 1834,
        "total_tokens": 2129,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 1834,
        "total_tokens": 2129,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the $I_X$ versus $V_X$ characteristic curve for the given circuit, we need to analyze the operating regions of the n-channel MOSFET ($M_1$).\n\n### 1. Circuit Analysis\n* **Gate-to-Source Voltage ($V_{GS}$):** The source is grounded, and the gate is connected to $V_X$. Therefore, $V_{GS} = V_X$.\n* **Drain-to-Source Voltage ($V_{DS}$):** The drain is connected to a $1\\text{V}$ source and the source is grounded. Therefore, $V_{DS} = 1\\text{V}$ (constant).\n* **Drain Current ($I_X$):** This is the current flowing from the $1\\text{V}$ source through the MOSFET to ground.\n\n### 2. Operating Regions of the MOSFET\nThe behavior of $I_X$ depends on the value of $V_X$ relative to the threshold voltage $V_{th}$ and the drain voltage $V_{DS}$.\n\n*   **Cut-off Region ($V_X < V_{th}$):**\n    The MOSFET is \"off.\" No current flows.\n    $$\\mathbf{I_X = 0}$$\n\n*   **Saturation Region ($V_{th} \\le V_X \\le V_{th} + V_{DS}$):**\n    Since $V_{DS} = 1\\text{V}$, this region occurs when $V_{th} \\le V_X \\le V_{th} + 1\\text{V}$. In saturation, the current follows a square-law relationship:\n    $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{th})^2$$\n    The curve is a **parabola** increasing with $V_X$.\n\n*   **Linear (Triode) Region ($V_X > V_{th} + V_{DS}$):**\n    This occurs when $V_X > V_{th} + 1\\text{V}$. In this region, the current is given by:\n    $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_{th})V_{DS} - \\frac{1}{2}V_{DS}^2 \\right]$$\n    Substituting $V_{DS} = 1\\text{V}$:\n    $$I_X = \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{th} - 0.5)$$\n    The curve becomes a **straight line** with a positive slope.\n\n### 3. Summary for Sketching\nTo draw the graph of $I_X$ (y-axis) vs $V_X$ (x-axis):\n1.  **From $0$ to $V_{th}$:** The line stays flat on the x-axis ($I_X = 0$).\n2.  **From $V_{th}$ to $V_{th} + 1\\text{V}$:** The curve rises quadratically (curving upwards).\n3.  **Beyond $V_{th} + 1\\text{V}$:** The curve transitions into a straight diagonal line.\n\n**Conceptual Sketch:**\n\n```text\n  Ix ^\n     |                / (Linear region: straight line)\n     |               /\n     |             _/  <-- Transition at Vx = Vth + 1V\n     |          __/\n     |      ___/ (Saturation region: parabolic curve)\n     |_____/____________________> Vx\n     0    Vth\n```",
        "format": "markdown",
        "sha256": "a16845bfb98ecb56edbefe180dfd80e4780fa5a419c3badda89959c41e1b4550"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions and gives the required quadratic rise followed by a roughly linear rise beyond Vx = Vth + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 2134,
        "total_tokens": 2428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1324,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 2134,
        "total_tokens": 2428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1324,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the $I_X$ versus $V_X$ characteristic for the given circuit, we need to analyze the operating regions of the n-channel MOSFET ($M_1$).\n\n### 1. Circuit Analysis\n* **Gate-Source Voltage ($V_{GS}$):** The source is grounded, and the gate is connected to $V_X$. Therefore, $V_{GS} = V_X$.\n* **Drain-Source Voltage ($V_{DS}$):** The drain is connected to a $1\\text{V}$ source and the source is grounded. Therefore, $V_{DS} = 1\\text{V}$.\n* **Drain Current ($I_X$):** This is the current flowing through the MOSFET, $I_D$.\n\n### 2. Operating Regions\nThe behavior of the MOSFET depends on the value of $V_X$ relative to the threshold voltage $V_{th}$:\n\n*   **Cut-off Region ($V_X < V_{th}$):**\n    The MOSFET is off. No current flows regardless of $V_{DS}$.\n    $$I_X = 0$$\n\n*   **Saturation Region ($V_{th} \\le V_X \\le V_{th} + V_{DS}$):**\n    Since $V_{DS} = 1\\text{V}$, this region occurs when $V_{th} \\le V_X \\le V_{th} + 1\\text{V}$. In saturation, the current is independent of $V_{DS}$ and depends quadratically on $V_{GS}$.\n    $$I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{th})^2$$\n    The graph is a **parabolic curve** increasing from zero.\n\n*   **Linear (Triode) Region ($V_X > V_{th} + V_{DS}$):**\n    This region occurs when $V_X > V_{th} + 1\\text{V}$. Here, the device behaves more like a voltage-controlled resistor.\n    $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_{th})V_{DS} - \\frac{1}{2}V_{DS}^2 \\right]$$\n    Substituting $V_{DS} = 1\\text{V}$, we get:\n    $$I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_{th}) - \\frac{1}{2} \\right]$$\n    In this region, $I_X$ is a **linear function** of $V_X$.\n\n### 3. Sketching the Graph\nWhen plotting $I_X$ (y-axis) against $V_X$ (x-axis):\n1.  **From $0$ to $V_{th}$:** The plot is a flat line on the x-axis ($I_X = 0$).\n2.  **From $V_{th}$ to $V_{th} + 1\\text{V}$:** The plot is a quadratic curve (parabola) curving upwards.\n3.  **Beyond $V_{th} + 1\\text{V}$:** The plot transitions smoothly into a straight line with a positive slope.\n\n**Summary of the curve shape:**\n$\\text{Flat line} \\rightarrow \\text{Parabolic increase} \\rightarrow \\text{Linear increase}$",
        "format": "markdown",
        "sha256": "c94ae5a07e9e6cb4f35bdafc9e0c25d1d20e26934129d51fabab5ad3bb7ab9d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, quadratic saturation current up to V_X = V_th + 1 V, and a roughly linear triode-region rise beyond it, with the appropriate current expressions.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 1980,
        "total_tokens": 2274,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1208,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 1980,
        "total_tokens": 2274,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1208,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the answer is **no**, the device cannot act as a current source.\n\nHere is the detailed explanation:\n\n1.  **Device Identification**: The figure shows an **n-channel enhancement-mode MOSFET** ($M_1$).\n2.  **Analysis of Voltages**: \n    *   The **gate** is connected to ground ($0\\text{V}$).\n    *   The **source** is connected to ground ($0\\text{V}$).\n    *   Therefore, the gate-to-source voltage is $V_{GS} = V_G - V_S = 0\\text{V} - 0\\text{V} = 0\\text{V}$.\n3.  **Operating State**: For an enhancement-mode NMOS to conduct current, the gate-to-source voltage ($V_{GS}$) must be greater than the device's threshold voltage ($V_{th}$). Since $V_{GS} = 0\\text{V}$ and the threshold voltage for such devices is typically positive (e.g., $0.4\\text{V}$ to $2\\text{V}$), the condition $V_{GS} < V_{th}$ is met.\n4.  **Conclusion**: Because $V_{GS}$ is below the threshold, the transistor is in the **cutoff region**. In this state, the channel is not formed, and the drain current ($I_X$) will be approximately zero regardless of the voltage applied to the drain. \n\nSince it cannot conduct a controlled or constant non-zero current, it cannot function as a current source. To make it act as a current source, a positive voltage would need to be applied to the gate to put the transistor into the **saturation region**.",
        "format": "markdown",
        "sha256": "477e56e6f5f45002c32fcafeba0be0f51e231d93acb09730292bb7a34be00f37"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS and misreads its terminals; it concludes “no” only because it assumes VGS = 0 and cutoff, missing the actual PMOS diode connection and its low impedance.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 1416,
        "total_tokens": 1708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1039,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 1416,
        "total_tokens": 1708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1039,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the answer is **yes**, provided that the device is a **depletion-mode MOSFET**.\n\nHere is the detailed explanation:\n\n### 1. Identifying the Device\nThe symbol shown is an n-channel MOSFET. A key detail is the **solid line** representing the channel between the source and the drain. In standard electronic symbols:\n*   A **dashed/broken line** indicates an **enhancement-mode** MOSFET (normally OFF).\n*   A **solid line** indicates a **depletion-mode** MOSFET (normally ON).\n\n### 2. Analyzing the Bias Conditions\n*   **Gate Voltage ($V_G$):** The gate is connected to ground ($0\\text{V}$).\n*   **Source Voltage ($V_S$):** The source is connected to ground ($0\\text{V}$).\n*   **Gate-to-Source Voltage ($V_{GS}$):** $V_{GS} = V_G - V_S = 0\\text{V} - 0\\text{V} = 0\\text{V}$.\n\n### 3. Why it acts as a Current Source\nIn a **depletion-mode NMOS**, the threshold voltage ($V_{th}$) is **negative**. This means the device is \"normally on\"—it will conduct current even when $V_{GS} = 0\\text{V}$.\n\nWhen a positive voltage is applied to the drain (creating the current $I_X$), the transistor will operate in the **saturation region** as long as the drain-to-source voltage ($V_{DS}$) is sufficiently high ($V_{DS} > V_{GS} - V_{th}$). \n\nIn the saturation region, the drain current is given by the formula:\n$$I_D \\approx \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n\nSince $V_{GS}$ is fixed at $0\\text{V}$ by the ground connections, the current $I_X$ depends only on the physical properties of the transistor and the constant $V_{th}$. Because the current remains relatively constant regardless of changes in the drain voltage ($V_{DS}$), the device effectively acts as a **constant current source**.\n\n***\n\n**Note:** If this were an *enhancement-mode* MOSFET (dashed line), the answer would be **no**, because $V_{GS} = 0\\text{V}$ is below the positive threshold voltage, meaning the device would be in cutoff (OFF) and no current would flow.",
        "format": "markdown",
        "sha256": "bb429b7c2f62cdc77065b3404365f8b2b34e79e52a6db42e0665b737cefc779e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly concludes that the device can act as a current source. M1 is a diode-connected PMOS, not a depletion-mode NMOS; it presents low impedance (about 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 2158,
        "total_tokens": 2450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1599,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 2158,
        "total_tokens": 2450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1599,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the answer depends on the type of MOSFET being used:\n\n### 1. If it is an Enhancement-Mode MOSFET (Standard)\n**No**, it cannot act as a functional current source. \nIn an enhancement-mode NMOS, the device is \"normally off.\" To conduct current, the gate-to-source voltage ($V_{GS}$) must be greater than a positive threshold voltage ($V_{th}$). In this figure, both the gate and the source are connected to ground, meaning $V_{GS} = 0\\text{V}$. Since $0\\text{V} < V_{th}$, the transistor is in the **cutoff region**, and no current will flow ($I_X \\approx 0$).\n\n### 2. If it is a Depletion-Mode MOSFET\n**Yes**, it can act as a current source.\nA depletion-mode NMOS is \"normally on,\" meaning it has a negative threshold voltage ($V_{th} < 0$). Even with $V_{GS} = 0\\text{V}$, the device is conductive. If the voltage at the drain is high enough to keep the transistor in the **saturation region**, the current $I_X$ will remain relatively constant regardless of the voltage applied to the drain. This behavior is exactly what defines a constant current source.\n\n### Summary\nThe device can act as a current source **if and only if it is a depletion-mode MOSFET**. In that case, it provides a constant current (often denoted as $I_{DSS}$) when the gate is grounded.",
        "format": "markdown",
        "sha256": "0b89b3071285668a9f38b1b6269956b4f518f20986b620eb28d58ee59345cfcf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the drawn diode-connected PMOS as an NMOS with its source grounded and concludes it can be a current source if depletion-mode. As drawn, M1 presents a low impedance of about 1/gm and cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 2988,
        "total_tokens": 3280,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 2988,
        "total_tokens": 3280,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification\n*   **Transistor Type**: The device $M_1$ is a **PMOS (p-channel MOSFET)**. This is indicated by the arrow on the source terminal pointing into the channel.\n*   **Configuration**: This is a **Common-Source (CS) amplifier** with **source degeneration**.\n    *   **Input**: The input voltage $V_{in}$ is applied to the **gate**.\n    *   **Output**: The output voltage $V_{out}$ is taken from the **drain**.\n    *   **Source**: The source is connected to the supply voltage $V_{DD}$ through a resistor $R_S$.\n\n### 2. DC Analysis (Biasing)\nFor the PMOS transistor to operate in the saturation region (the active region for amplification), the following conditions must be met:\n*   **Gate-Source Voltage ($V_{GS}$)**: The voltage $V_{GS} = V_{in} - V_S$ must be more negative than the threshold voltage $V_{th,p}$ (i.e., $V_{GS} < V_{th,p}$).\n*   **Drain-Source Voltage ($V_{DS}$)**: The voltage $V_{DS} = V_{out} - V_S$ must be sufficiently negative to keep the device in saturation ($V_{SD} \\ge V_{SG} - |V_{th,p}|$).\n\nThe drain current $I_D$ flows from the source to the drain. The output voltage is determined by the current flowing through the drain resistor $R_D$:\n$$V_{out} = I_D \\cdot R_D$$\n\n### 3. AC Analysis (Small-Signal Behavior)\n*   **Inverting Gain**: This circuit acts as an **inverting amplifier**. When $V_{in}$ increases, the gate-source potential difference ($V_{SG}$) decreases, which reduces the drain current $I_D$. A decrease in $I_D$ leads to a decrease in the voltage drop across $R_D$, thus lowering $V_{out}$.\n*   **Source Degeneration**: The resistor $R_S$ is a \"source degeneration\" resistor. It provides negative feedback that:\n    *   **Stabilizes the gain**: It makes the gain less dependent on the specific parameters of the transistor (like $g_m$).\n    *   **Increases linearity**: It reduces harmonic distortion.\n    *   **Reduces overall gain**: The voltage gain is lower than it would be if the source were connected directly to $V_{DD}$.\n\nThe approximate voltage gain ($A_v$) is given by:\n$$A_v = \\frac{v_{out}}{v_{in}} \\approx -\\frac{g_m R_D}{1 + g_m R_S}$$\n*(where $g_m$ is the transconductance of the MOSFET)*.\n\n### Summary Table\n| Feature | Description |\n| :--- | :--- |\n| **Transistor** | PMOS |\n| **Topology** | Common-Source Amplifier |\n| **Feedback** | Source Degeneration (via $R_S$) |\n| **Phase** | Inverting (180° phase shift) |\n| **Primary Function** | Voltage amplification with improved stability |",
        "format": "markdown",
        "sha256": "8d7d318288f7518b624a951a9034a477f373a7269ca4e722bf8b4558a9dc2f09"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS), matching the golden solution.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 286,
        "output_tokens": 7966,
        "total_tokens": 8252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7241,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 286,
        "output_tokens": 7966,
        "total_tokens": 8252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7241,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit consists of the following components:\n*   **Transistor ($M_1$):** An n-channel MOSFET (NMOS), identified by the arrow on the source terminal pointing away from the gate.\n*   **Resistors:** Two resistors, labeled $R_S$ and $R_D$. \n    *   *Note:* In standard electronics nomenclature, $R_D$ refers to the Drain resistor and $R_S$ refers to the Source resistor. In this diagram, the labels appear to be swapped: the resistor at the drain is labeled $R_S$ and the resistor at the source is labeled $R_D$.\n*   **Voltage Sources:** A DC supply voltage $V_{DD}$ and an input signal voltage $V_{in}$.\n*   **Output:** The output voltage $V_{out}$ is taken from the source terminal of the MOSFET.\n\n### 2. Circuit Configuration\nBecause the input is applied to the gate and the output is taken from the source, this is a **Source Follower** (also known as a **Common-Drain** amplifier) configuration.\n\nUnlike a basic source follower where the drain is connected directly to $V_{DD}$, this circuit includes a resistor ($R_S$ in the diagram) at the drain. This adds a voltage drop, which slightly reduces the available voltage headroom for the output signal.\n\n### 3. DC Analysis (Biasing)\nTo operate as an amplifier, the MOSFET must be biased in the **saturation region**.\n*   **Gate-Source Voltage ($V_{GS}$):** $V_{GS} = V_{in} - V_{out}$\n*   **Drain Current ($I_D$):** In saturation, the current is given by:\n    $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n*   **Output Voltage ($V_{out}$):** The DC output voltage is determined by the current flowing through the source resistor:\n    $$V_{out} = I_D \\cdot R_D$$\n*   **Drain-Source Voltage ($V_{DS}$):** By applying Kirchhoff's Voltage Law (KVL) from $V_{DD}$ to ground:\n    $$V_{DS} = V_{DD} - I_D(R_S + R_D)$$\n    For the transistor to remain in saturation, we must have $V_{DS} \\ge V_{GS} - V_{th}$.\n\n### 4. AC Analysis (Small-Signal)\nThe source follower is primarily used as a voltage buffer. Its key characteristics are:\n\n*   **Voltage Gain ($A_v$):** The gain is slightly less than unity (1) and is non-inverting.\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_D}{1 + g_m R_D} \\approx 1 \\text{ (if } g_m R_D \\gg 1)$$\n    where $g_m$ is the transconductance of the MOSFET.\n*   **Input Impedance ($Z_{in}$):** Because the gate of a MOSFET is insulated by a layer of silicon dioxide, the input impedance is **extremely high** (ideally infinite).\n*   **Output Impedance ($Z_{out}$):** The output impedance is **very low**, approximately:\n    $$Z_{out} \\approx \\frac{1}{g_m} \\parallel R_D$$\n\n### Summary Table\n| Parameter | Characteristic |\n| :--- | :--- |\n| **Configuration** | Source Follower (Common-Drain) |\n| **Voltage Gain** | $\\approx 1$ (Non-inverting) |\n| **Input Impedance** | Very High |\n| **Output Impedance** | Very Low |\n| **Primary Use** | Impedance matching / Voltage buffering |",
        "format": "markdown",
        "sha256": "7b912900213b02de1bc3af7e0a274d00e5245e0968e7ced5a09c80b6cf464c1c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads the PMOS common-source stage as an NMOS source follower, puts the output at the wrong terminal, and gives an unrelated gain expression. The essential topology and conclusion are incorrect.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 287,
        "output_tokens": 5315,
        "total_tokens": 5602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4435,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 287,
        "output_tokens": 5315,
        "total_tokens": 5602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4435,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is an **NMOS-based amplifier** in a **Common-Drain (CD)** configuration, more commonly known as a **Source Follower**. \n\nWe can identify this because the input signal ($V_{in}$) is applied to the gate, and the output signal ($V_{out}$) is taken from the source terminal. In this configuration, the drain is \"common\" to both the input and output paths (connected to the supply voltage $V_{DD}$).\n\n**Note on Labeling:** Interestingly, the resistors in this diagram are labeled unconventionally. Typically, $R_D$ refers to the Drain resistor and $R_S$ refers to the Source resistor. In this figure, the drain resistor is labeled $R_S$ and the source resistor is labeled $R_D$. For the analysis below, I will refer to them by their positions (top and bottom) to avoid confusion.\n\n### 2. Component Analysis\n*   **$M_1$**: An n-channel enhancement-mode MOSFET.\n*   **Top Resistor ($R_S$ in diagram)**: Acts as a bias resistor for the drain. In many source follower circuits, the drain is connected directly to $V_{DD}$, but here a resistor is used.\n*   **Bottom Resistor ($R_D$ in diagram)**: The source resistor that converts the drain current into an output voltage.\n*   **$V_{DD}$**: The DC power supply.\n*   **$V_{in}$**: The input control voltage.\n*   **$V_{out}$**: The output voltage, which \"follows\" the input.\n\n### 3. Operational Analysis\n#### DC Biasing\nFor the transistor to operate as an amplifier, it must be biased in the **saturation region**. The drain current $I_D$ is determined by the gate-to-source voltage $V_{GS}$:\n$$I_D \\approx \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\nThe output voltage is the voltage drop across the bottom resistor:\n$$V_{out} = I_D \\cdot R_{bottom}$$\nSince $V_{GS} = V_{in} - V_{out}$, the output voltage is intrinsically linked to the input voltage.\n\n#### AC Small-Signal Analysis\nIn a source follower, the output voltage changes in the same direction as the input voltage. If $V_{in}$ increases, $V_{GS}$ increases, which increases $I_D$, subsequently increasing the voltage drop across the bottom resistor and raising $V_{out}$.\n\n*   **Voltage Gain ($A_v$):** The gain is slightly less than unity (1) and is non-inverting.\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_{bottom}}{1 + g_m R_{bottom}} \\approx 1$$\n    *(where $g_m$ is the transconductance of the MOSFET)*.\n*   **Input Impedance ($Z_{in}$):** Extremely high, because the gate of a MOSFET is insulated by a layer of silicon dioxide.\n*   **Output Impedance ($Z_{out}$):** Very low, approximately the parallel combination of the transistor's internal resistance ($1/g_m$) and the source resistor.\n\n### 4. Summary Table\n| Characteristic | Value/Property |\n| :--- | :--- |\n| **Configuration** | Common-Drain (Source Follower) |\n| **Voltage Gain** | $\\approx 1$ (Non-inverting) |\n| **Input Impedance** | Very High |\n| **Output Impedance** | Low |\n| **Phase** | Input and Output are in phase |\n\n### 5. Application\nThis circuit is primarily used as a **voltage buffer**. Because it has high input impedance and low output impedance, it can be used to connect a high-impedance signal source to a low-impedance load without \"loading down\" the source and causing signal loss.",
        "format": "markdown",
        "sha256": "1da8ad709d784e6cfcf75d09ac8f58c1aa718596625bddf2d9ca6d70e3891a63"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the PMOS common-source stage as an NMOS source follower, places the output at the wrong terminal, and gives an unrelated non-inverting gain.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 286,
        "output_tokens": 3805,
        "total_tokens": 4091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2903,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 286,
        "output_tokens": 3805,
        "total_tokens": 4091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2903,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Drain (CD) amplifier**, more commonly known as a **Source Follower**. \n\nIn this configuration:\n*   The **input signal** ($V_{in}$) is applied to the **Gate**.\n*   The **output signal** ($V_{out}$) is taken from the **Source**.\n*   The **Drain** is connected to a constant DC supply voltage ($V_{DD}$), making it \"common\" to both input and output in terms of AC signals (it acts as an AC ground).\n\n### 2. Component Analysis\n*   **$M_1$**: An n-channel enhancement-mode MOSFET (NMOS).\n*   **$R_S$**: The source resistor, which converts the drain current into an output voltage.\n*   **$V_{DD}$**: The positive supply voltage that biases the transistor.\n*   **$V_{in}$**: The input control voltage.\n*   **$V_{out}$**: The output voltage.\n\n### 3. Working Principle\nThe MOSFET $M_1$ acts as a voltage-controlled current source. When $V_{in}$ increases, the gate-to-source voltage ($V_{GS}$) increases, which in turn increases the drain current ($I_D$) flowing through the transistor and the resistor $R_S$. \n\nSince $V_{out} = I_D \\cdot R_S$, an increase in $V_{in}$ leads to an increase in $V_{out}$. Because the output voltage \"follows\" the input voltage, this circuit is called a **Source Follower**.\n\n### 4. Mathematical Analysis (Small-Signal)\nTo find the voltage gain ($A_v$), we look at the small-signal model:\n*   The transconductance of the MOSFET is $g_m$.\n*   The small-signal input is $v_{gs} = v_{in} - v_{out}$.\n*   The output voltage is $v_{out} = g_m v_{gs} \\cdot R_S = g_m (v_{in} - v_{out}) R_S$.\n\nRearranging for the gain:\n$$v_{out} (1 + g_m R_S) = g_m R_S v_{in}$$\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_S}{1 + g_m R_S}$$\n\n### 5. Key Characteristics\n| Characteristic | Value/Behavior | Reason |\n| :--- | :--- | :--- |\n| **Voltage Gain** | $\\approx 1$ (Slightly less than unity) | The formula $\\frac{g_m R_S}{1 + g_m R_S}$ is always less than 1. |\n| **Input Impedance** | Very High | The gate of a MOSFET is insulated by a layer of $\\text{SiO}_2$. |\n| **Output Impedance** | Very Low | The source is seen as a low resistance ($\\approx 1/g_m \\parallel R_S$). |\n| **Phase** | Non-inverting | $V_{out}$ moves in the same direction as $V_{in}$. |\n\n### 6. Applications\nBecause of its high input impedance and low output impedance, the Source Follower is primarily used as a **Buffer Amplifier**. It is used to connect a high-impedance source (which cannot provide much current) to a low-impedance load without causing \"loading effects\" (voltage drops) that would distort the signal.",
        "format": "markdown",
        "sha256": "ee1fd85f3d4ed29f1526da304988600ae4283fdb8706e91e65996f40703a850a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, gm·RS/(1 + gm·RS).",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 1842,
        "total_tokens": 2134,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1046,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 1842,
        "total_tokens": 2134,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1046,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Drain Amplifier**, more commonly known as a **Source Follower**. \n\nIn this configuration:\n*   The **input signal** ($V_{in}$) is applied to the **Gate**.\n*   The **output signal** ($V_{out}$) is taken from the **Source**.\n*   The **Drain** is connected directly to the DC supply voltage ($V_{DD}$), making it a common terminal for both input and output (effectively \"common\" to the AC signal).\n\n### 2. Component Analysis\n*   **$M_1$ (NMOS Transistor):** Acts as the active amplifying element. For the circuit to function as a linear amplifier, the transistor must be biased in the **saturation region**.\n*   **$R_S$ (Source Resistor):** This resistor converts the drain current ($I_D$) into an output voltage ($V_{out}$). It also provides negative feedback, which stabilizes the gain.\n*   **$V_{DD}$:** The positive supply voltage that powers the circuit.\n\n### 3. Working Principle\nThe \"Source Follower\" gets its name because the output voltage at the source \"follows\" the input voltage at the gate.\n\n*   **DC Operation:** The output voltage is given by $V_{out} = I_D \\cdot R_S$. Since $I_D$ depends on the gate-to-source voltage ($V_{GS} = V_{in} - V_{out}$), any change in $V_{in}$ causes a corresponding change in $I_D$, which in turn changes $V_{out}$.\n*   **Voltage Shift:** The output voltage is typically lower than the input voltage by approximately one threshold voltage plus the overdrive voltage ($V_{out} \\approx V_{in} - V_{GS}$).\n\n### 4. Small-Signal Analysis (Gain)\nThe voltage gain ($A_v$) of a source follower is slightly less than unity (1). Using the small-signal model:\n\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_S}{1 + g_m R_S}$$\n\nWhere $g_m$ is the transconductance of the MOSFET. Since the product $g_m R_S$ is usually much larger than 1, the gain is:\n$$A_v \\approx 1$$\n\n### 5. Key Characteristics\n| Characteristic | Value/Property | Reason |\n| :--- | :--- | :--- |\n| **Voltage Gain** | $\\approx 1$ (Unity) | The output tracks the input almost exactly. |\n| **Input Impedance** | Very High | The gate of a MOSFET is insulated by a layer of oxide. |\n| **Output Impedance** | Very Low | The source is effectively shunted by $1/g_m$ and $R_S$. |\n| **Phase** | In-Phase | The output moves in the same direction as the input. |\n\n### 6. Applications\nBecause of its unique properties (high input impedance and low output impedance), this circuit is primarily used as a **Voltage Buffer**. It is placed between a high-impedance signal source (which cannot drive much current) and a low-impedance load to prevent \"loading effects\" and signal attenuation.",
        "format": "markdown",
        "sha256": "9c253c0270468e15ec7a0f575c6d3512ecb3510983a63be9b7176285547c10dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a source follower and gives its positive, less-than-unity gain as gm RS/(1 + gm RS), satisfying the full-credit rule.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1672,
        "total_tokens": 1965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 937,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1672,
        "total_tokens": 1965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 937,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Drain amplifier**, more commonly known as a **Source Follower**. \n\nIn this configuration:\n*   The **Input** is applied to the Gate.\n*   The **Output** is taken from the Source.\n*   The **Drain** is connected to a constant DC supply voltage ($V_{DD}$), making it \"common\" to the AC signal.\n\n### 2. Component Analysis\n*   **$M_1$ (NMOS Transistor):** Acts as the active amplifying/buffering element. It controls the current flowing from $V_{DD}$ to ground based on the input voltage $V_{in}$.\n*   **$V_{DD}$:** The supply voltage that biases the transistor.\n*   **$R_S$ (Source Resistor):** This resistor converts the drain current ($I_D$) into an output voltage ($V_{out}$). It also provides negative feedback, which stabilizes the gain.\n*   **$V_{in}$:** The input signal voltage.\n*   **$V_{out}$:** The output signal voltage.\n\n### 3. Operational Analysis\n#### DC Analysis (Biasing)\nThe transistor $M_1$ must be biased in the **saturation region** to act as a linear amplifier. The current flowing through the device is determined by the gate-to-source voltage ($V_{GS}$):\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\nWhere $V_{GS} = V_{in} - V_{out}$. The output voltage is then $V_{out} = I_D \\cdot R_S$.\n\n#### AC Analysis (Small-Signal Gain)\nThe voltage gain ($A_v$) of a source follower is defined as the ratio of the output voltage change to the input voltage change:\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_S}{1 + g_m R_S}$$\n*   **$g_m$** is the transconductance of the MOSFET.\n*   Since $g_m R_S$ is typically much larger than 1, the gain is **slightly less than unity** ($A_v \\approx 1$).\n*   Because the output \"follows\" the input voltage, it is called a **Source Follower**.\n\n### 4. Key Characteristics\n| Characteristic | Value/Behavior | Reason |\n| :--- | :--- | :--- |\n| **Voltage Gain** | $\\approx 1$ (Unity) | The output tracks the input voltage. |\n| **Input Impedance** | Very High | The gate of a MOSFET is insulated by a layer of $\\text{SiO}_2$. |\n| **Output Impedance** | Low | The source is connected to a low-resistance path to ground. |\n| **Phase** | In-Phase | The output signal moves in the same direction as the input. |\n\n### 5. Summary and Application\nThe primary purpose of this circuit is not to amplify voltage, but to act as a **Buffer Amplifier**. \n\nBecause it has **high input impedance** (it doesn't load the previous stage) and **low output impedance** (it can drive a heavy load without the voltage dropping), it is ideal for interfacing a high-impedance signal source with a low-impedance load.",
        "format": "markdown",
        "sha256": "db7043617e290b02bf2aa6028c743299314bda116052dd46608813661de03460"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as gm RS/(1 + gm RS).",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1610,
        "total_tokens": 1903,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1610,
        "total_tokens": 1903,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit consists of the following components:\n*   **$M_1$**: An n-channel MOSFET (NMOS). We can identify it as an NMOS because the arrow on the source terminal points outward from the channel.\n*   **$R_D$**: A drain resistor connected between the drain of the MOSFET and the supply voltage.\n*   **$V_{DD}$**: The positive DC supply voltage.\n*   **$V_{in}$**: The input voltage applied to the source of the MOSFET.\n*   **$V_{out}$**: The output voltage taken from the drain of the MOSFET.\n\n### 2. Configuration\nThis is a **source-follower** (or common-drain) configuration, but with a specific twist: the gate is tied to a constant supply voltage ($V_{DD}$) rather than being the input.\n*   **Gate Connection**: The gate is connected directly to $V_{DD}$.\n*   **Source Connection**: The input voltage $V_{in}$ is applied to the source.\n*   **Drain Connection**: The drain is connected to $V_{out}$ and tied to $V_{DD}$ through the resistor $R_D$.\n\n### 3. Mathematical Analysis\nTo understand how the circuit behaves, we look at the relationship between $V_{in}$ and $V_{out}$:\n\n*   **Gate-Source Voltage ($V_{GS}$):**\n    The voltage at the gate is $V_{DD}$ and the voltage at the source is $V_{in}$. Therefore:\n    $$V_{GS} = V_{DD} - V_{in}$$\n*   **Drain Current ($I_D$):**\n    Assuming the MOSFET is operating in the **saturation region** (which is typical for amplifier circuits), the current is given by:\n    $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2 = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{DD} - V_{in} - V_{th})^2$$\n    where $V_{th}$ is the threshold voltage of the NMOS.\n*   **Output Voltage ($V_{out}$):**\n    The output voltage is the supply voltage minus the voltage drop across the drain resistor $R_D$:\n    $$V_{out} = V_{DD} - I_D R_D$$\n\n### 4. Transfer Characteristics (Behavior)\nWe can determine how $V_{out}$ changes as $V_{in}$ varies:\n1.  **As $V_{in}$ increases**: The gate-source voltage $V_{GS} = (V_{DD} - V_{in})$ **decreases**.\n2.  **Effect on Current**: A decrease in $V_{GS}$ leads to a **decrease** in the drain current $I_D$.\n3.  **Effect on Output**: Since $I_D$ decreases, the voltage drop across the resistor ($I_D R_D$) also decreases.\n4.  **Result**: Because $V_{out} = V_{DD} - I_D R_D$, a smaller voltage drop means $V_{out}$ **increases**.\n\n### Summary\nThis circuit acts as a **non-inverting voltage converter**. As the input voltage $V_{in}$ increases, the output voltage $V_{out}$ also increases. It essentially converts a source-side voltage variation into a drain-side voltage variation.",
        "format": "markdown",
        "sha256": "df553dbd833ed9be078a50e0a1f9cf7e2976bb1129649d9e14a144dd148adab9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the source as the input and derives the non-inverting output trend, but misclassifies the circuit as a source follower rather than a common-gate stage and omits the key small-signal results, including Rin ≈ 1/gm and Av ≈ +gm(RD || ro).",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 278,
        "output_tokens": 10972,
        "total_tokens": 11250,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10185,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 278,
        "output_tokens": 10972,
        "total_tokens": 11250,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10185,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, the circuit is a **Common-Source (CS) amplifier** using an n-channel MOSFET (NMOS).\n\n### 1. Circuit Components and Topology\n*   **$M_1$**: An n-channel enhancement-mode MOSFET.\n*   **$R_D$**: The drain resistor, which acts as the load for the amplifier.\n*   **$V_{DD}$**: The positive DC supply voltage.\n*   **$V_{in}$**: The input voltage applied to the gate of the MOSFET.\n*   **$V_{out}$**: The output voltage taken from the drain of the MOSFET.\n*   **Source Connection**: The source of $M_1$ is connected to ground (implied by the bottom terminal).\n\n*(Note: There is a line connecting the gate to the $V_{DD}$ rail in the drawing. In a standard amplifier, this would be an error as it would tie the input to the supply voltage. It is most likely intended to be a bulk/substrate connection or a drawing artifact, so this analysis treats it as a standard Common-Source amplifier where $V_{in}$ is the independent control signal.)*\n\n---\n\n### 2. Qualitative Analysis (How it Works)\nThe Common-Source amplifier is used to amplify a voltage signal. Its primary characteristic is **voltage inversion**.\n\n*   **When $V_{in}$ increases**: The gate-to-source voltage ($V_{GS}$) increases, which causes the MOSFET to conduct more current ($I_D$) from the drain to the source.\n*   **Effect on $V_{out}$**: As the drain current $I_D$ increases, the voltage drop across the resistor $R_D$ (which is $I_D \\times R_D$) also increases. Since $V_{out} = V_{DD} - (I_D \\times R_D)$, an increase in current causes the output voltage to **drop**.\n*   **Result**: An increase in input voltage leads to a decrease in output voltage, meaning the signal is inverted (180° phase shift).\n\n---\n\n### 3. Quantitative Analysis\n\n#### DC Analysis (Biasing)\nAssuming the transistor is operating in the **saturation region** (where it acts as a voltage-controlled current source), the drain current is given by:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\nWhere:\n*   $\\mu_n C_{ox}$ is the process transconductance parameter.\n*   $W/L$ is the aspect ratio of the gate.\n*   $V_{th}$ is the threshold voltage.\n\nThe DC output voltage is:\n$$V_{out} = V_{DD} - I_D R_D$$\n\n#### Small-Signal Analysis (Gain)\nFor small changes in the input voltage ($\\Delta v_{in}$), the circuit behaves as a linear amplifier. The voltage gain ($A_v$) is defined as the ratio of the output change to the input change:\n$$A_v = \\frac{v_{out}}{v_{in}} = -g_m (R_D \\parallel r_o) \\approx -g_m R_D$$\nWhere:\n*   **$g_m$ (Transconductance)**: The measure of how effectively the gate voltage controls the drain current ($g_m = \\frac{\\partial I_D}{\\partial V_{GS}}$).\n*   **$r_o$**: The internal output resistance of the MOSFET (often neglected if $R_D$ is small).\n\n### Summary Table\n| Parameter | Value/Behavior |\n| :--- | :--- |\n| **Configuration** | Common-Source |\n| **Phase** | Inverted (180°) |\n| **Input Impedance** | Very High (Gate is insulated) |\n| **Output Impedance** | Approximately $R_D$ |\n| **Voltage Gain** | $\\approx -g_m R_D$ |",
        "format": "markdown",
        "sha256": "82b5a446ec1bb1f06c314d5f0b937df208168d070a4a364ad0629e75dbf380b1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the input as being applied to the gate and the source as grounded, ignoring the actual common-gate connection. It therefore gives the wrong gain sign and input impedance, so its analysis does not apply to the shown circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 279,
        "output_tokens": 8405,
        "total_tokens": 8684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 279,
        "output_tokens": 8405,
        "total_tokens": 8684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Source (CS) Amplifier** using an n-channel MOSFET ($M_1$). \n\nIn this configuration:\n*   **Input ($V_{in}$)** is applied to the **Gate**.\n*   **Output ($V_{out}$)** is taken from the **Drain**.\n*   The **Source** is connected to ground (the common reference point).\n\n### 2. Component Breakdown\n*   **$M_1$ (NMOS Transistor):** Acts as a voltage-controlled current source. The voltage at the gate controls the amount of current flowing from the drain to the source.\n*   **$R_D$ (Drain Resistor):** This resistor converts the varying current flowing through the transistor into a varying output voltage.\n*   **$V_{DD}$ (Supply Voltage):** Provides the necessary DC power to the circuit.\n\n### 3. Principle of Operation\nThe circuit operates by controlling the current $I_D$ through the MOSFET:\n1.  **Input Control:** When the input voltage $V_{in}$ increases (above the threshold voltage $V_{th}$), the MOSFET conducts more current ($I_D$ increases).\n2.  **Voltage Drop:** According to Ohm's Law, as $I_D$ increases, the voltage drop across the resistor $R_D$ (which is $I_D \\times R_D$) also increases.\n3.  **Output Response:** Since $V_{out} = V_{DD} - (I_D \\times R_D)$, an increase in $V_{in}$ leads to a decrease in $V_{out}$.\n\n### 4. Key Characteristics\n*   **Voltage Gain:** The circuit provides voltage amplification. The small-signal voltage gain ($A_v$) is approximately:\n    $$A_v = \\frac{V_{out}}{V_{in}} \\approx -g_m \\cdot R_D$$\n    *(where $g_m$ is the transconductance of the MOSFET)*.\n*   **Phase Inversion:** The negative sign in the gain formula indicates a **180-degree phase shift**. This means if the input signal goes \"up,\" the output signal goes \"down.\"\n*   **High Input Impedance:** Because the gate of a MOSFET is insulated by a layer of silicon dioxide, it draws almost no DC current, resulting in a very high input impedance.\n\n### Summary Table\n| Feature | Description |\n| :--- | :--- |\n| **Circuit Type** | Common-Source Amplifier |\n| **Device** | NMOS Transistor |\n| **Input Terminal** | Gate |\n| **Output Terminal** | Drain |\n| **Phase** | Inverting (180° shift) |\n| **Primary Use** | Voltage amplification |",
        "format": "markdown",
        "sha256": "4964f5ae4c5d106e3f7f7e062b86da1292b7a8f0c811a02d0e78d729de4a443f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology: Vin is applied to the source, the gate is AC-grounded, and the source is not grounded. It therefore gives the wrong input resistance and gain sign; the circuit is common-gate with non-inverting gain.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 279,
        "output_tokens": 1266,
        "total_tokens": 1545,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 639,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 279,
        "output_tokens": 1266,
        "total_tokens": 1545,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 639,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Gate (CG) Amplifier** using an n-channel MOSFET ($M_1$). \n\nIn a common-gate configuration:\n*   The **input signal** is applied to the **Source**.\n*   The **output signal** is taken from the **Drain**.\n*   The **Gate** is connected to a constant DC bias voltage ($V_b$), making it an \"AC ground.\"\n\n### 2. Component Breakdown\n*   **$M_1$**: The active amplifying element (NMOS transistor).\n*   **$R_D$**: The drain resistor, which converts the current changes in the MOSFET into a voltage change at the output.\n*   **$C_1$**: A coupling capacitor. It blocks the DC component of the input source $V_{in}$ and allows only the AC signal to pass through to the source of the transistor.\n*   **$V_{DD}$**: The positive DC supply voltage.\n*   **$V_b$**: The bias voltage used to set the operating point (Q-point) of the transistor, ensuring it operates in the **saturation region** for linear amplification.\n*   **$V_{in}$ and $V_{out}$**: The input and output voltage terminals.\n\n### 3. Operational Analysis\n\n#### DC Analysis (Biasing)\nFor DC analysis, the capacitor $C_1$ acts as an open circuit.\n*   The source is connected directly to ground ($V_S = 0\\text{V}$).\n*   The gate-to-source voltage is $V_{GS} = V_b - 0 = V_b$.\n*   The drain current $I_D$ is determined by the bias voltage $V_b$ and the transistor's characteristics.\n*   The DC output voltage is $V_{out(DC)} = V_{DD} - I_D R_D$.\n\n#### AC Analysis (Small-Signal)\nFor AC analysis, the capacitor $C_1$ acts as a short circuit, and the DC supply $V_{DD}$ and bias $V_b$ act as AC grounds.\n*   **Phase:** Unlike the Common-Source amplifier (which inverts the signal), the Common-Gate amplifier is **non-inverting**. An increase in $V_{in}$ increases the source voltage, which decreases $V_{GS}$, leading to a decrease in $I_D$. This causes the voltage drop across $R_D$ to decrease, which in turn **increases** $V_{out}$.\n*   **Voltage Gain ($A_v$):** The gain is approximately:\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx g_m (R_D \\parallel r_o)$$\n    Where $g_m$ is the transconductance of the MOSFET and $r_o$ is the output resistance of the transistor. Since $r_o$ is typically very large, $A_v \\approx g_m R_D$.\n\n### 4. Key Characteristics\n| Characteristic | Property | Note |\n| :--- | :--- | :--- |\n| **Voltage Gain** | High | Similar to Common-Source, but non-inverting. |\n| **Input Impedance** | Low | Approximately $1/g_m$. This makes it useful for impedance matching. |\n| **Output Impedance** | Moderate/High | Approximately $R_D$. |\n| **Phase Shift** | $0^\\circ$ | Input and output are in phase. |\n| **Bandwidth** | High | It avoids the \"Miller Effect,\" making it excellent for high-frequency applications. |\n\n### Summary\nThis circuit is primarily used in high-frequency applications (like RF amplifiers) and as a **current buffer** because of its low input impedance and high output impedance. It effectively allows a signal to pass from a low-impedance source to a higher-impedance load while providing voltage gain.",
        "format": "markdown",
        "sha256": "39c1f079972ee79be3cb0949add4d6be5545a5e61a60756ebfbfc9a4f4c891b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the common-gate topology but misses that the source/input node is hard-shorted to ground, so the input is shorted and the ideal gain is zero. Its common-gate gain analysis therefore does not apply.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 1802,
        "total_tokens": 2098,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 1802,
        "total_tokens": 2098,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, this is a **Common-Gate (CG) Amplifier** using an n-channel MOSFET ($M_1$).\n\nIn a common-gate configuration, the input signal is applied to the **source**, the output is taken from the **drain**, and the **gate** is held at a constant DC bias voltage.\n\n### 1. Circuit Components and Their Roles\n*   **$M_1$ (NMOS Transistor):** The active device that provides amplification.\n*   **$R_D$ (Drain Resistor):** Converts the varying drain current into a varying output voltage $V_{out}$.\n*   **$C_1$ (Coupling Capacitor):** Blocks the DC component of the input source $V_{in}$ and allows only the AC signal to pass into the source of the transistor.\n*   **$V_b$ (Bias Voltage):** Sets the quiescent operating point (the \"DC bias\") of the transistor by controlling the gate-to-source voltage ($V_{GS}$).\n*   **$V_{DD}$:** The positive DC power supply.\n\n---\n\n### 2. DC Analysis (Quiescent Point)\nTo find the DC operating point, we treat the capacitor $C_1$ as an open circuit.\n*   **Gate-Source Voltage ($V_{GS}$):** Since the source is connected to ground, $V_S = 0\\text{V}$. Therefore, $V_{GS} = V_b - 0 = V_b$.\n*   **Drain Current ($I_D$):** Assuming the transistor is operating in the saturation region, the current is:\n    $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_b - V_{th})^2$$\n*   **DC Output Voltage ($V_{out,DC}$):** The voltage at the drain is determined by the voltage drop across $R_D$:\n    $$V_{out,DC} = V_{DD} - I_D R_D$$\n\n---\n\n### 3. AC Analysis (Small-Signal)\nFor AC analysis, the DC supply $V_{DD}$ and the bias voltage $V_b$ are treated as AC grounds. The capacitor $C_1$ is treated as a short circuit.\n*   **Signal Path:** The input signal $v_{in}$ is applied directly to the source. Because the gate is at a constant potential, it acts as a \"common\" terminal (hence the name \"Common-Gate\").\n*   **Voltage Gain ($A_v$):** The gain of a common-gate amplifier is approximately:\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx g_m R_D$$\n    where $g_m$ is the transconductance of the MOSFET.\n*   **Phase:** Unlike the common-source amplifier, the CG amplifier is **non-inverting**. The output signal is in phase with the input signal.\n*   **Input Impedance ($Z_{in}$):** The input impedance is very low, approximately $1/g_m$.\n*   **Output Impedance ($Z_{out}$):** The output impedance is relatively high, approximately $R_D$.\n\n---\n\n### Summary Table\n\n| Characteristic | Common-Gate (CG) Amplifier |\n| :--- | :--- |\n| **Input Terminal** | Source |\n| **Output Terminal** | Drain |\n| **Voltage Gain** | $\\approx g_m R_D$ (High) |\n| **Phase Shift** | $0^\\circ$ (Non-inverting) |\n| **Input Impedance** | Low ($\\approx 1/g_m$) |\n| **Output Impedance** | High ($\\approx R_D$) |\n\n**Note on the Diagram:** In a practical circuit, the ground symbol at the source is often replaced by a source resistor ($R_S$) to improve stability. If the source is perfectly grounded as shown, the AC signal $V_{in}$ would be shorted to ground; however, in textbook diagrams of this type, it is understood that the input is coupled to the source node to demonstrate the CG amplifier's properties.",
        "format": "markdown",
        "sha256": "39bc0dfee03b8805e30c3ccccad83f4d3dc4406198b8f4b4adce055d9248b2da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It explicitly notices that the source short grounds the input, but then dismisses that connection and assigns the ordinary common-gate gain. The circuit’s ideal gain from Vin is approximately zero; noticing the short while still using the gain as if it were absent is limited to 2.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 8005,
        "total_tokens": 8301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 8005,
        "total_tokens": 8301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Gate (CG) Amplifier** using an n-channel MOSFET ($M_1$). \n\nIn a common-gate configuration:\n*   The **input signal** is applied to the **source** of the transistor.\n*   The **output signal** is taken from the **drain** of the transistor.\n*   The **gate** is connected to a constant DC bias voltage ($V_b$), which makes it an **AC ground**.\n\n### 2. Component Functions\n*   **$V_{DD}$**: The positive DC supply voltage that powers the circuit.\n*   **$R_D$**: The drain resistor, which converts the drain current changes into an output voltage signal.\n*   **$M_1$**: The NMOS transistor that provides the transconductance ($g_m$) necessary for amplification.\n*   **$V_b$**: The bias voltage used to set the operating point (Q-point) of the transistor, ensuring it operates in the **saturation region**.\n*   **$C_1$**: A coupling capacitor that blocks DC from the input source $V_{in}$ while allowing the AC signal to pass through to the source of $M_1$.\n*   **$V_{in}$**: The AC input signal.\n*   **$V_{out}$**: The amplified AC output signal.\n\n### 3. DC Analysis (Biasing)\nTo ensure the amplifier works, $M_1$ must be biased in the saturation region. The DC drain current ($I_D$) is determined by the bias voltage $V_b$:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_b - V_{th})^2$$\nThe DC output voltage (quiescent voltage) is:\n$$V_{out(DC)} = V_{DD} - I_D R_D$$\n\n### 4. AC Analysis (Small-Signal)\nFor AC analysis, we treat the DC supply $V_{DD}$ and the bias voltage $V_b$ as ground.\n*   **Voltage Gain ($A_v$):** The common-gate amplifier provides a **non-inverting** gain. Assuming the output resistance of the transistor ($r_o$) is much larger than $R_D$, the gain is approximately:\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx g_m R_D$$\n    where $g_m$ is the transconductance of the MOSFET.\n*   **Input Impedance ($Z_{in}$):** The input impedance is very low, approximately:\n    $$Z_{in} \\approx \\frac{1}{g_m}$$\n*   **Output Impedance ($Z_{out}$):** The output impedance is primarily determined by the drain resistor:\n    $$Z_{out} \\approx R_D$$\n\n### 5. Summary Table\n| Characteristic | Common-Gate Amplifier |\n| :--- | :--- |\n| **Phase** | Non-inverting (Input and Output are in phase) |\n| **Voltage Gain** | High ($\\approx g_m R_D$) |\n| **Input Impedance** | Very Low |\n| **Output Impedance** | Moderate to High |\n| **Key Advantage** | No Miller effect, making it excellent for high-frequency applications. |\n\n***Note on the Diagram:*** *In a practical circuit, the ground symbol at the source would short the input signal $V_{in}$ to ground. In the context of this theoretical analysis, that ground symbol is likely intended as a reference for the input signal or is a drafting error, as the input $V_{in}$ must be able to drive the source node to achieve amplification.*",
        "format": "markdown",
        "sha256": "8761b74ab098c35f01ca5b27c06453135b1219c39b3fd40f0f6429f054e6c4db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the common-gate topology and notices the source-ground short, but dismisses it as a drafting error and incorrectly concludes the circuit has gain. The short makes the ideal input-to-output gain zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 297,
        "output_tokens": 6678,
        "total_tokens": 6975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5842,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 297,
        "output_tokens": 6678,
        "total_tokens": 6975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5842,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to identify the number of independent energy-storing elements (capacitors) that contribute to the system's dynamics.\n\n1.  **Identify the Nodes:**\n    *   **Gate Node:** The node between the resistor $R_S$ and the transistor $M_1$.\n    *   **Drain Node:** The node between the transistor $M_1$, the load resistor $R_D$, and the output $V_{out}$.\n    *   **Source Node:** The source of the transistor is connected directly to ground.\n\n2.  **Analyze the Capacitors:**\n    *   **$C_{GS}$ (Gate-Source Capacitor):** This capacitor is connected between the gate node and ground. It creates a pole at the gate.\n    *   **$C_{GD}$ (Gate-Drain Capacitor):** This capacitor is connected between the gate node and the drain node. It couples the two nodes but does not introduce a new independent state variable because both ends are already connected to nodes with their own capacitances to ground.\n    *   **$C_{DB}$ (Drain-Body Capacitor):** This capacitor is connected between the drain node and ground (since the body is grounded). It creates a pole at the drain.\n    *   **$C_{SB}$ (Source-Body Capacitor):** This capacitor is connected between the source and the body. Since both the source and the body are connected to ground, this capacitor is effectively shorted and does not contribute to the circuit's dynamics or poles.\n\n3.  **Determine the Order of the System:**\n    The state of the circuit is fully described by the voltages at the two non-grounded nodes: the gate voltage ($V_G$) and the drain voltage ($V_{out}$). Because there are two independent state variables, the system is a **second-order system**.\n\nIn a linear system, the number of poles is equal to the order of the system. Therefore, this circuit has **2 poles**.",
        "format": "markdown",
        "sha256": "2874d4f7e974216c6f87ee504fb048d38b684736dd5a89fe9705ad680f794c8e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes there are two poles and accounts for the capacitors, including that C_SB is shorted because both terminals are grounded.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 2462,
        "total_tokens": 2763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2032,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 2462,
        "total_tokens": 2763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2032,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the circuit, we need to identify the number of independent energy-storage elements (capacitors) that create independent state variables in the system.\n\n1.  **Identify the Nodes:**\n    *   **Gate Node ($V_g$):** This node has a voltage that varies over time. It is connected to $C_{GS}$ (to ground) and $C_{GD}$ (to the drain).\n    *   **Drain Node ($V_{out}$):** This node also has a voltage that varies over time. It is connected to $C_{GD}$ (to the gate) and $C_{DB}$ (to ground).\n    *   **Source/Bulk Nodes:** The source of the transistor $M_1$ and the bulk are both connected to ground. Because the source is grounded, the capacitor $C_{SB}$ is connected directly across a short circuit (ground to ground), meaning it does not store energy in a way that affects the circuit's dynamics.\n\n2.  **Analyze the System Order:**\n    *   The number of poles in a linear time-invariant (LTI) circuit is equal to the order of the system, which corresponds to the number of independent capacitors (or inductors) that cannot be simplified by series or parallel combinations into a single element.\n    *   In this circuit, we have two primary nodes with capacitive loads: the gate and the drain.\n    *   The state of the system can be fully described by the voltages at these two nodes: $V_g$ and $V_{out}$.\n    *   Mathematically, this results in a system of two first-order differential equations. The characteristic equation of such a system is a second-order polynomial (quadratic), which has **two roots**. These roots are the poles of the system.\n\n**Conclusion:**\nSince there are two independent capacitive nodes that determine the dynamics of the circuit, the circuit has **2 poles**.",
        "format": "markdown",
        "sha256": "49609c7cc3be772eedf83a00edd068af87246eef633f94536bfff415dec95d03"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes there are two poles and accounts for the capacitor topology: C_SB is shorted because both terminals are grounded, leaving the gate and drain dynamics.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 1414,
        "total_tokens": 1715,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1004,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 1414,
        "total_tokens": 1715,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1004,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to identify the number of independent energy storage elements (capacitors) that are not shorted.\n\n1.  **Identify the Nodes:**\n    *   **Gate Node ($V_G$):** Connected to $R_S$, $C_{GS}$, and $C_{GD}$.\n    *   **Drain Node ($V_D$):** Connected to $R_D$, $C_{GD}$, and $C_{DB}$.\n    *   **Source Node ($V_S$):** Connected directly to ground.\n\n2.  **Analyze the Capacitors:**\n    *   **$C_{GS}$:** Connected between the Gate node and the Source node (ground). This is an active energy storage element.\n    *   **$C_{GD}$:** Connected between the Gate node and the Drain node. This is an active energy storage element.\n    *   **$C_{DB}$:** Connected between the Drain node and the Source node (ground). This is an active energy storage element.\n    *   **$C_{SB}$:** Connected between the Source node and ground. Since the Source node is already connected to ground, $C_{SB}$ is effectively shorted and does not contribute to the dynamics of the circuit.\n\n3.  **Determine the Order of the System:**\n    The number of poles in a linear circuit is equal to the number of independent capacitors (or inductors). In this circuit, we have three capacitors ($C_{GS}$, $C_{GD}$, and $C_{DB}$) connected across three nodes (Gate, Drain, and Ground). \n    \n    The number of independent capacitors is given by:\n    $$\\text{Number of independent capacitors} = (\\text{Number of nodes}) - 1$$\n    $$\\text{Number of independent capacitors} = 3 - 1 = 2$$\n\n    Alternatively, we can see that the state of the system is fully described by the voltages at the two non-grounded nodes (Gate and Drain). Since there are two independent state variables, the system is second-order.\n\nA second-order system has **2 poles**.",
        "format": "markdown",
        "sha256": "f6325d156f361c1419f72f04c3a93ad39ac1bc1a5fd212440c66c57adb5b1647"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes there are two poles and notes that CSB is shorted because both terminals are grounded; the remaining capacitor voltages have only two independent state variables.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 2218,
        "total_tokens": 2519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1757,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 2218,
        "total_tokens": 2519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1757,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Topology Identification\nThe circuit consists of an n-channel MOSFET ($M_1$) configured as a **Common-Gate (CG) amplifier** with a **negative feedback loop**.\n\n*   **Input ($V_{in}$):** Applied to the **Source** terminal.\n*   **Output ($V_{out}$):** Taken from the **Drain** terminal.\n*   **Feedback Path:** The output voltage $V_{out}$ is fed back to the **Gate** terminal through a resistive voltage divider consisting of $R_1$ and $R_2$.\n\n### 2. Working Principle\nThe operation of the circuit can be broken down into the following steps:\n\n1.  **Gate Voltage Generation:** The voltage at the gate, labeled $V_F$, is determined by the output voltage $V_{out}$ via the voltage divider:\n    $$V_F = V_{out} \\cdot \\left( \\frac{R_2}{R_1 + R_2} \\right)$$\n2.  **MOSFET Biasing:** The MOSFET's operation depends on the gate-to-source voltage ($V_{GS}$):\n    $$V_{GS} = V_F - V_{in}$$\n3.  **Drain Current:** Assuming the MOSFET is in the saturation region, the drain current $I_D$ is given by:\n    $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n    where $V_{th}$ is the threshold voltage.\n4.  **Output Voltage:** The output voltage is the supply voltage $V_{DD}$ minus the voltage drop across the drain resistor $R_D$:\n    $$V_{out} = V_{DD} - I_D R_D$$\n\n### 3. Feedback Analysis\nThis circuit employs **negative feedback**, which is critical for stability. Let's trace the effect of a change in $V_{out}$:\n\n*   If $V_{out}$ **increases** $\\rightarrow$ $V_F$ (gate voltage) **increases** (via the divider).\n*   An increase in $V_F$ leads to an **increase in $V_{GS}$**.\n*   An increase in $V_{GS}$ causes the MOSFET to conduct more current, so **$I_D$ increases**.\n*   An increase in $I_D$ causes a larger voltage drop across $R_D$, which **decreases $V_{out}$**.\n\nBecause the initial increase in $V_{out}$ triggers a sequence of events that ultimately acts to decrease $V_{out}$, the feedback is **negative**.\n\n### 4. Summary of Characteristics\n*   **Stability:** The negative feedback makes the circuit less sensitive to variations in the MOSFET's parameters (like $V_{th}$ or $\\mu_n C_{ox}$) and temperature changes.\n*   **Gain:** While a standard common-gate amplifier has high gain, the addition of this feedback loop reduces the overall voltage gain but increases the linearity and bandwidth of the amplifier.\n*   **Application:** This configuration is often used in precision voltage regulators, active loads, or as a buffer stage where stability and a specific output impedance are required.",
        "format": "markdown",
        "sha256": "4019492165590f7be2de3e4b34f8108c8e800a95d6591c85303e4d39659da558"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. The golden solution explicitly grants full credit for these points; a gain expression is not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 297,
        "output_tokens": 2638,
        "total_tokens": 2935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 297,
        "output_tokens": 2638,
        "total_tokens": 2935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is a **Common-Gate (CG) amplifier** with a **negative feedback loop**. \n\n*   **Input ($V_{in}$):** Applied to the **source** of the MOSFET ($M_1$).\n*   **Output ($V_{out}$):** Taken from the **drain** of the MOSFET.\n*   **Gate Bias:** The gate is connected to a voltage divider ($R_1$ and $R_2$) that samples the output voltage $V_{out}$.\n\n### 2. Qualitative Analysis of Feedback\nThis circuit employs negative feedback to stabilize the gain and improve the linearity of the amplifier. Here is how the feedback loop works:\n1.  If the output voltage $V_{out}$ increases, the voltage at the gate $V_F$ also increases (since $V_F = V_{out} \\cdot \\frac{R_2}{R_1 + R_2}$).\n2.  An increase in $V_F$ increases the gate-to-source voltage $V_{GS}$ (assuming $V_{in}$ is constant).\n3.  An increase in $V_{GS}$ increases the drain current $I_D$ flowing through the MOSFET.\n4.  As $I_D$ increases, the voltage drop across the drain resistor $R_D$ increases, which causes the output voltage $V_{out} = V_{DD} - I_D R_D$ to **decrease**.\n\nBecause an increase in output leads to a corrective action that decreases the output, this is **negative feedback**.\n\n### 3. Small-Signal Analysis\nTo find the voltage gain, we can use the small-signal model of the MOSFET.\n\n*   **Open-Loop Gain ($A_{v0}$):** For a standard common-gate amplifier, the gain is approximately:\n    $$A_{v0} = \\frac{v_{out}}{v_{in}} \\approx g_m R_D$$\n    *(where $g_m$ is the transconductance of the MOSFET)*.\n*   **Feedback Factor ($\\beta$):** The fraction of the output voltage fed back to the gate is:\n    $$\\beta = \\frac{R_2}{R_1 + R_2}$$\n*   **Closed-Loop Gain ($A_{vf}$):** With the feedback loop active, the gain is modified according to the standard feedback formula:\n    $$A_{vf} = \\frac{A_{v0}}{1 + \\beta A_{v0}} = \\frac{g_m R_D}{1 + \\left(\\frac{R_2}{R_1 + R_2}\\right) g_m R_D}$$\n\n### 4. Summary of Characteristics\n| Feature | Analysis |\n| :--- | :--- |\n| **Configuration** | Common-Gate (CG) |\n| **Phase** | Non-inverting (Input and output move in the same direction) |\n| **Feedback Type** | Shunt-series negative feedback |\n| **Input Impedance** | Very low (approximately $1/g_m$), which is typical for CG stages |\n| **Output Impedance** | Relatively high (approximately $R_D \\parallel r_{o}$) |\n| **Purpose of $R_1, R_2$** | To stabilize the operating point and reduce the overall gain in exchange for better linearity and stability. |",
        "format": "markdown",
        "sha256": "5a42c6874b6103ff02cc5553c26ce5797ae77912ac2161a6a2e8cf3387d6b696"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative-feedback action, with the correct non-inverting behavior. The gain uses an approximate RD-only load and omits divider loading, but the essential topology and feedback analysis are correct.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 2111,
        "total_tokens": 2407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 2111,
        "total_tokens": 2407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis.\n\n### 1. Circuit Identification\nThe circuit consists of an n-channel MOSFET ($M_1$) configured as a **Common-Gate (CG) amplifier** with a feedback network. \n* **Input ($V_{in}$):** Applied to the **source** of the MOSFET.\n* **Output ($V_{out}$):** Taken from the **drain** of the MOSFET.\n* **Gate Bias:** The gate is connected to a voltage divider ($R_1$ and $R_2$) that derives its voltage from the output $V_{out}$. This creates a **negative feedback loop** from the drain to the gate.\n\n---\n\n### 2. DC Analysis (Biasing)\nTo ensure the MOSFET operates in the saturation region (where it acts as an amplifier), we must analyze the DC voltages.\n\n* **Gate Voltage ($V_G$):** The gate voltage $V_F$ is determined by the voltage divider from $V_{out}$:\n  $$V_G = V_{out} \\cdot \\frac{R_2}{R_1 + R_2}$$\n* **Gate-to-Source Voltage ($V_{GS}$):**\n  $$V_{GS} = V_G - V_{in} = \\left( V_{out} \\cdot \\frac{R_2}{R_1 + R_2} \\right) - V_{in}$$\n* **Drain Current ($I_D$):** Assuming the MOSFET is in saturation:\n  $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n* **Output Voltage ($V_{out}$):**\n  $$V_{out} = V_{DD} - I_D R_D$$\n\nThe circuit is self-biasing; the value of $V_{out}$ depends on $I_D$, which in turn depends on $V_{out}$ via the gate feedback.\n\n---\n\n### 3. AC Analysis (Small-Signal)\nTo find the voltage gain, we look at the small-signal variations ($v_{in}, v_{out}, v_g$).\n\n1. **Gate Signal:** The small-signal voltage at the gate is a fraction of the output:\n   $$v_g = v_{out} \\cdot \\frac{R_2}{R_1 + R_2} = \\beta v_{out} \\quad \\text{where } \\beta = \\frac{R_2}{R_1 + R_2}$$\n2. **Drain Current:** The small-signal drain current $i_d$ is:\n   $$i_d = g_m (v_{gs}) = g_m (v_g - v_{in}) = g_m (\\beta v_{out} - v_{in})$$\n3. **Output Voltage:** The output voltage is the drop across $R_D$:\n   $$v_{out} = -i_d R_D = -g_m (\\beta v_{out} - v_{in}) R_D$$\n4. **Voltage Gain ($A_v$):** Rearranging the equation to solve for $v_{out}/v_{in}$:\n   $$v_{out} + g_m R_D \\beta v_{out} = g_m R_D v_{in}$$\n   $$v_{out} (1 + g_m R_D \\beta) = g_m R_D v_{in}$$\n   $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_D}{1 + g_m R_D \\beta}$$\n\n---\n\n### 4. Analysis of Feedback\nThe term $\\beta = \\frac{R_2}{R_1 + R_2}$ represents the feedback factor.\n* **Without Feedback ($\\beta = 0$):** The gain is $A_{open} = g_m R_D$, which is the standard gain for a Common-Gate amplifier.\n* **With Feedback ($\\beta > 0$):** The gain is reduced by the factor $(1 + A_{open}\\beta)$. This is a classic **negative feedback** configuration.\n* **Effect:** While the gain is lower, the feedback improves the stability of the gain against variations in $g_m$ (temperature or process changes) and increases the bandwidth of the amplifier.\n\n### Summary Table\n| Parameter | Characteristic |\n| :--- | :--- |\n| **Configuration** | Common-Gate with Drain-to-Gate Feedback |\n| **Phase** | Non-inverting (Input and Output move in the same direction) |\n| **Input Impedance** | Low (approximately $1/g_m$) |\n| **Output Impedance** | High (approximately $R_D$) |\n| **Voltage Gain** | $\\frac{g_m R_D}{1 + g_m R_D \\frac{R_2}{R_1+R_2}}$ |",
        "format": "markdown",
        "sha256": "665fbd767598e86c0576dbaed5db5e06e731447902af0a5e1c70d73dbc21d480"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative feedback. The gain expression uses RD rather than the divider-loaded RD || (R1 + R2), a permissible approximation when the divider resistance is large; the extra bias and impedance discussion is not essential.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 3217,
        "total_tokens": 3513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2111,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 3217,
        "total_tokens": 3513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2111,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification\nThis circuit is a **PMOS Common-Source (CS) Amplifier with an NMOS Active Load**. \n\n*   **$M_1$ (PMOS Transistor):** This is the input transistor. It is a P-channel MOSFET, indicated by the arrow on the source pointing into the channel.\n*   **$M_2$ (NMOS Transistor):** This is the load transistor. It is an N-channel MOSFET, indicated by the arrow on the source pointing away from the channel.\n*   **$V_{DD}$:** The positive supply voltage.\n*   **$V_{in}$:** The input signal voltage applied to the gate of $M_1$.\n*   **$V_b$:** A constant bias voltage applied to the gate of $M_2$ to set its operating point.\n*   **$V_{out}$:** The output voltage taken from the common drain node of both transistors.\n\n---\n\n### 2. Principle of Operation\nThe circuit operates by using $M_2$ as a constant current source and $M_1$ as a voltage-controlled current source.\n\n*   **The Active Load ($M_2$):** By applying a fixed voltage $V_b$ to the gate of $M_2$, it is biased to operate in the **saturation region**. In this state, $M_2$ acts as a constant current sink, pulling a steady current $I_{D2}$ from the output node to ground.\n*   **The Input Stage ($M_1$):** The input voltage $V_{in}$ controls the amount of current $I_{D1}$ that $M_1$ can pull from $V_{DD}$. \n    *   Since $M_1$ is a PMOS, as $V_{in}$ **increases**, the gate-to-source voltage $|V_{GS1}|$ decreases, causing $M_1$ to conduct **less current**.\n    *   As $V_{in}$ **decreases**, $|V_{GS1}|$ increases, and $M_1$ conducts **more current**.\n\n---\n\n### 3. Input-Output Relationship (Transfer Characteristic)\nBecause the current through $M_1$ must equal the current through $M_2$ ($I_{D1} = I_{D2}$), the output voltage $V_{out}$ must adjust to maintain this balance:\n\n1.  **When $V_{in}$ increases $\\rightarrow$** $M_1$ conducts less current. Since $M_2$ is still pulling the same amount of current down to ground, the output node $V_{out}$ is \"pulled down,\" and **$V_{out}$ decreases**.\n2.  **When $V_{in}$ decreases $\\rightarrow$** $M_1$ conducts more current. This floods the output node with more charge, and **$V_{out}$ increases**.\n\nBecause the output moves in the opposite direction of the input, this is an **inverting amplifier**.\n\n---\n\n### 4. Key Performance Metrics\n*   **Voltage Gain ($A_v$):** The small-signal gain is given by the transconductance of the input transistor multiplied by the total output resistance:\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx -g_{m1} (r_{o1} \\parallel r_{o2})$$\n    Where:\n    *   $g_{m1}$ is the transconductance of $M_1$.\n    *   $r_{o1}$ and $r_{o2}$ are the output resistances (channel length modulation effects) of $M_1$ and $M_2$ respectively.\n*   **High Gain:** Using an active load ($M_2$) instead of a passive resistor allows for a much higher output resistance ($r_{o1} \\parallel r_{o2}$), which significantly increases the voltage gain of the amplifier compared to a standard resistor-load CS amplifier.\n\n### Summary Table\n| Component | Type | Role | Effect of $V_{in} \\uparrow$ |\n| :--- | :--- | :--- | :--- |\n| **$M_1$** | PMOS | Driver / Input | Current $I_{D1}$ decreases |\n| **$M_2$** | NMOS | Active Load / Bias | Current $I_{D2}$ remains constant |\n| **$V_{out}$** | Node | Output | Voltage $V_{out}$ decreases |",
        "format": "markdown",
        "sha256": "c08f8aa0fd22cd3f0c6937751ddae505b6d4f76ea1a3f9dfa0e6f2d1ebfcf7eb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a PMOS common-source amplifier and gives an inverting gain. The actual circuit is an NMOS source follower with a positive gain at or slightly below unity.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 3641,
        "total_tokens": 3933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 3641,
        "total_tokens": 3933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThis circuit is a **PMOS Common-Source Amplifier with an NMOS Active Load**. \n\nIt consists of two MOSFETs:\n*   **$M_1$ (PMOS):** The input transistor. Its source is connected to the supply voltage $V_{DD}$, and its gate is the input $V_{in}$.\n*   **$M_2$ (NMOS):** The load transistor. Its source is connected to ground, and its gate is connected to a constant bias voltage $V_b$.\n\n### 2. Operational Analysis\n\n#### The Load ($M_2$)\nThe NMOS transistor $M_2$ is biased by a constant voltage $V_b$. If $V_b$ is chosen such that $M_2$ remains in the **saturation region**, it acts as a **constant current source**. The current it sinks from the output node is approximately:\n$$I_{D2} \\approx \\frac{1}{2} \\mu_n C_{ox} \\frac{W_2}{L_2} (V_b - V_{th,n})^2$$\nwhere $V_{th,n}$ is the threshold voltage of the NMOS.\n\n#### The Input Stage ($M_1$)\nThe PMOS transistor $M_1$ controls the current flowing from $V_{DD}$ to the output node $V_{out}$. \n*   The gate-to-source voltage is $V_{GS1} = V_{in} - V_{DD}$.\n*   Since $V_{DD}$ is the highest potential, $V_{GS1}$ is negative.\n*   As $V_{in}$ **increases**, $V_{GS1}$ becomes less negative (increases), which **decreases** the current $I_{D1}$ flowing through $M_1$.\n\n#### The Output ($V_{out}$)\nThe output voltage $V_{out}$ is determined by the balance of currents between $M_1$ and $M_2$. Since $I_{D1} = I_{D2}$ (neglecting leakage):\n*   If $V_{in}$ increases $\\rightarrow$ $M_1$ conducts less current $\\rightarrow$ The constant current from $M_2$ pulls the output node further down $\\rightarrow$ **$V_{out}$ decreases**.\n*   If $V_{in}$ decreases $\\rightarrow$ $M_1$ conducts more current $\\rightarrow$ More charge is pushed into the output node $\\rightarrow$ **$V_{out}$ increases**.\n\nBecause an increase in input leads to a decrease in output, this is an **inverting amplifier**.\n\n### 3. Key Performance Characteristics\n\n*   **Voltage Gain ($A_v$):** The gain is very high because the NMOS active load provides a much higher output impedance than a standard resistor. The gain is approximately:\n    $$A_v = \\frac{\\partial V_{out}}{\\partial V_{in}} = -g_{m1} (r_{o1} \\parallel r_{o2})$$\n    where $g_{m1}$ is the transconductance of $M_1$, and $r_{o1}, r_{o2}$ are the output resistances of the two transistors.\n*   **Input Impedance:** Very high, as the input is connected to the gate of a MOSFET.\n*   **Output Impedance:** High, determined by the parallel combination of the drain resistances of $M_1$ and $M_2$.\n\n### Summary Table\n| Feature | Description |\n| :--- | :--- |\n| **Circuit Type** | PMOS Common-Source Amplifier |\n| **Load Type** | NMOS Active Load (Current Source) |\n| **Phase** | Inverting (180° phase shift) |\n| **Primary Use** | High-gain voltage amplification in integrated circuits (ICs) |",
        "format": "markdown",
        "sha256": "847b41c95ba5fc1abdd76fee5efd0899bbb6110bd48faf71439d72f9d3910641"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a PMOS common-source stage with an NMOS active load and gives an inverting gain. The actual circuit is an NMOS source follower with positive gain near unity.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 2378,
        "total_tokens": 2671,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1528,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 2378,
        "total_tokens": 2671,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1528,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is a **PMOS Common-Source Amplifier with an NMOS Active Load**. \n\nIt consists of two MOSFETs:\n*   **$M_1$ (PMOS):** This is the input transistor. It is connected to the supply voltage $V_{DD}$ at its source, with the input signal $V_{in}$ applied to its gate.\n*   **$M_2$ (NMOS):** This transistor acts as a current source load. Its gate is connected to a constant bias voltage $V_b$, and its source is connected to ground.\n\n### 2. Operational Analysis\nThe circuit operates by balancing the currents flowing through the two transistors.\n\n*   **The Load ($M_2$):** By applying a constant voltage $V_b$ to the gate of $M_2$, it is biased to operate in the **saturation region**. In this region, $M_2$ acts as a constant current source, sinking a fixed amount of current ($I_{D2}$) from the output node $V_{out}$ to the ground.\n*   **The Input Stage ($M_1$):** $M_1$ is a PMOS device, meaning it conducts when its gate voltage $V_{in}$ is lower than its source voltage $V_{DD}$. \n    *   **When $V_{in}$ decreases:** The gate-to-source voltage $|V_{GS1}|$ increases, causing $M_1$ to conduct more current. Since $M_1$ is \"pushing\" more current into the output node than $M_2$ is \"pulling\" out, the voltage $V_{out}$ **increases**.\n    *   **When $V_{in}$ increases:** $|V_{GS1}|$ decreases, and $M_1$ conducts less current. The constant current sink $M_2$ then pulls the output node voltage $V_{out}$ **downward**.\n\n### 3. Transfer Characteristics\nBecause an increase in $V_{in}$ leads to a decrease in $V_{out}$, this circuit is an **inverting amplifier**. \n\nThe output voltage $V_{out}$ is determined by the equation:\n$$I_{D1}(V_{in}, V_{out}) = I_{D2}(V_b, V_{out})$$\n\n### 4. Small-Signal Analysis (Gain)\nIf we analyze this circuit for small signals around a bias point, the voltage gain ($A_v$) is given by:\n$$A_v = \\frac{v_{out}}{v_{in}} = -g_{m1} (r_{o1} \\parallel r_{o2})$$\n\nWhere:\n*   **$g_{m1}$** is the transconductance of the PMOS transistor $M_1$.\n*   **$r_{o1}$ and $r_{o2}$** are the output resistances of $M_1$ and $M_2$, respectively.\n*   The **negative sign** indicates the phase inversion.\n\n### Summary Table\n| Component | Type | Role | Control Variable |\n| :--- | :--- | :--- | :--- |\n| **$M_1$** | PMOS | Input Driver | $V_{in}$ |\n| **$M_2$** | NMOS | Active Load (Current Source) | $V_b$ |\n| **$V_{out}$** | Node | Amplified/Inverted Signal | Result of $I_{D1}$ vs $I_{D2}$ |",
        "format": "markdown",
        "sha256": "87603c90e4d0f0935686af77b14384edd2f24ecd7d400adb296b19e705db05d5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a PMOS common-source amplifier and gives an inverting gain. The actual circuit is an NMOS source follower with a positive gain at or below unity.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 2621,
        "total_tokens": 2914,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1837,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 2621,
        "total_tokens": 2914,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1837,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**. It is the fundamental building block of digital logic circuits.\n\n### 2. Component Analysis\nThe circuit consists of two complementary MOSFETs:\n*   **$M_1$ (NMOS Transistor):** Located at the bottom, connected between the output node ($V_{\\text{out}}$) and ground. An NMOS transistor turns **ON** when a high voltage is applied to its gate.\n*   **$M_2$ (PMOS Transistor):** Located at the top, connected between the supply voltage ($V_{\\text{DD}}$) and the output node ($V_{\\text{out}}$). A PMOS transistor turns **ON** when a low voltage is applied to its gate.\n\n### 3. Operational Analysis\nThe circuit operates based on the input voltage ($V_{\\text{in}}$) applied to the gates of both transistors:\n\n*   **Case 1: $V_{\\text{in}}$ is LOW (Logic 0 / Ground)**\n    *   **$M_1$ (NMOS)** is **OFF** because the gate-to-source voltage is too low to create a conducting channel.\n    *   **$M_2$ (PMOS)** is **ON** because the gate is at a lower potential than the source ($V_{\\text{DD}}$).\n    *   **Result:** The output $V_{\\text{out}}$ is connected to $V_{\\text{DD}}$ through $M_2$. Therefore, **$V_{\\text{out}} = \\text{HIGH}$**.\n\n*   **Case 2: $V_{\\text{in}}$ is HIGH (Logic 1 / $V_{\\text{DD}}$)**\n    *   **$M_1$ (NMOS)** is **ON** because the gate-to-source voltage is high enough to create a conducting channel.\n    *   **$M_2$ (PMOS)** is **OFF** because the gate-to-source voltage is near zero.\n    *   **Result:** The output $V_{\\text{out}}$ is pulled down to ground through $M_1$. Therefore, **$V_{\\text{out}} = \\text{LOW}$**.\n\n### 4. Summary Table\n| Input ($V_{\\text{in}}$) | $M_2$ (PMOS) | $M_1$ (NMOS) | Output ($V_{\\text{out}}$) |\n| :--- | :--- | :--- | :--- |\n| **LOW (0)** | ON | OFF | **HIGH (1)** |\n| **HIGH (1)** | OFF | ON | **LOW (0)** |\n\n### Conclusion\nThe circuit performs the **logical NOT operation**. Whatever signal is put into $V_{\\text{in}}$ is inverted at $V_{\\text{out}}$. This design is highly efficient because, in a steady state, one of the two transistors is always off, meaning there is virtually no direct current path from $V_{\\text{DD}}$ to ground, resulting in very low static power consumption.",
        "format": "markdown",
        "sha256": "1b37f70674049d530959be18e794af973564ec8fc05d565871c3e300a9534481"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and explains the complementary switching that inverts the input.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1514,
        "total_tokens": 1807,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 825,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1514,
        "total_tokens": 1807,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 825,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor inverter). It is the fundamental building block of digital logic circuits.\n\n### 2. Component Analysis\nThe circuit consists of two complementary MOSFETs:\n*   **$M_1$ (NMOS Transistor):** Located at the bottom, connected between the output node ($V_{\\text{out}}$) and ground. It acts as a \"pull-down\" device.\n*   **$M_2$ (PMOS Transistor):** Located at the top, connected between the supply voltage ($V_{\\text{DD}}$) and the output node ($V_{\\text{out}}$). It acts as a \"pull-up\" device.\n*   **Input ($V_{\\text{in}}$):** A single input signal connected to the gates of both transistors.\n*   **Output ($V_{\\text{out}}$):** The voltage taken from the common drain node of both transistors.\n\n### 3. Operational Analysis\nThe circuit operates based on the state of the input voltage $V_{\\text{in}}$ relative to the threshold voltages of the transistors.\n\n#### Case A: Input is LOW ($V_{\\text{in}} \\approx 0\\text{V}$ or Logic '0')\n*   **NMOS ($M_1$):** The gate-to-source voltage ($V_{\\text{GS}}$) is approximately $0\\text{V}$. Since this is below the threshold voltage ($V_{\\text{th,n}}$), $M_1$ is **OFF** (non-conducting).\n*   **PMOS ($M_2$):** The gate-to-source voltage is $V_{\\text{in}} - V_{\\text{DD}} \\approx -V_{\\text{DD}}$. This is strongly negative (below the PMOS threshold $V_{\\text{th,p}}$), so $M_2$ is **ON** (conducting).\n*   **Result:** The output $V_{\\text{out}}$ is connected to $V_{\\text{DD}}$ through $M_2$. Therefore, **$V_{\\text{out}} \\approx V_{\\text{DD}}$ (Logic '1')**.\n\n#### Case B: Input is HIGH ($V_{\\text{in}} \\approx V_{\\text{DD}}$ or Logic '1')\n*   **NMOS ($M_1$):** The gate-to-source voltage is $V_{\\text{in}} \\approx V_{\\text{DD}}$. This is above the threshold voltage, so $M_1$ is **ON** (conducting).\n*   **PMOS ($M_2$):** The gate-to-source voltage is $V_{\\text{in}} - V_{\\text{DD}} \\approx 0\\text{V}$. This is above the PMOS threshold, so $M_2$ is **OFF** (non-conducting).\n*   **Result:** The output $V_{\\text{out}}$ is connected to ground through $M_1$. Therefore, **$V_{\\text{out}} \\approx 0\\text{V}$ (Logic '0')**.\n\n### 4. Summary Table\n| Input ($V_{\\text{in}}$) | $M_2$ (PMOS) | $M_1$ (NMOS) | Output ($V_{\\text{out}}$) | Logic State |\n| :--- | :--- | :--- | :--- | :--- |\n| Low (0) | ON | OFF | High ($V_{\\text{DD}}$) | $0 \\rightarrow 1$ |\n| High (1) | OFF | ON | Low (0) | $1 \\rightarrow 0$ |\n\n### 5. Conclusion\nThe circuit performs the **logical NOT operation**. It takes an input signal and produces the opposite (inverted) signal at the output. \n\n**Key Advantages of this Design:**\n*   **High Input Impedance:** Since the gates are insulated, almost no current flows into the input.\n*   **Low Static Power Consumption:** In steady-state (either logic 0 or 1), one of the two transistors is always OFF, meaning there is no direct path from $V_{\\text{DD}}$ to ground.",
        "format": "markdown",
        "sha256": "8f75aa89e238e7d9b618fdc80266cadd60aa179e6db950b364f6ce7b7e0eca64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and explains the complementary input/output operation and negligible static current at logic levels.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1929,
        "total_tokens": 2222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 999,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1929,
        "total_tokens": 2222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 999,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**. It is the most fundamental building block of digital integrated circuits.\n\n### 2. Component Analysis\nThe circuit consists of two complementary MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors):\n*   **$M_1$ (NMOS):** An n-channel MOSFET located at the bottom. Its source is connected to ground (0V). It acts as a \"pull-down\" device.\n*   **$M_2$ (PMOS):** A p-channel MOSFET located at the top. Its source is connected to the supply voltage $V_{DD}$. It acts as a \"pull-up\" device.\n*   **Input ($V_{in}$):** The input signal is connected to the gates of both transistors.\n*   **Output ($V_{out}$):** The output is taken from the common junction (drains) of both transistors.\n\n---\n\n### 3. Operational Analysis\nThe circuit operates by switching between two states based on the input voltage $V_{in}$:\n\n#### Case A: Input is LOW ($V_{in} \\approx 0\\text{V}$)\n*   **NMOS ($M_1$):** The gate-to-source voltage ($V_{GS}$) is near 0V, which is below the threshold voltage ($V_{th,n}$). Therefore, **$M_1$ is OFF** (cutoff).\n*   **PMOS ($M_2$):** The gate-to-source voltage is approximately $-V_{DD}$. Since this is more negative than the PMOS threshold voltage ($V_{th,p}$), **$M_2$ is ON**.\n*   **Result:** The output $V_{out}$ is connected to $V_{DD}$ through the conducting $M_2$.\n*   **Output:** $V_{out} \\approx V_{DD}$ (**Logic HIGH**).\n\n#### Case B: Input is HIGH ($V_{in} \\approx V_{DD}$)\n*   **NMOS ($M_1$):** The gate-to-source voltage is $V_{DD}$, which is above the threshold voltage. Therefore, **$M_1$ is ON**.\n*   **PMOS ($M_2$):** The gate-to-source voltage is approximately 0V, which is above the PMOS threshold voltage. Therefore, **$M_2$ is OFF** (cutoff).\n*   **Result:** The output $V_{out}$ is connected to ground through the conducting $M_1$.\n*   **Output:** $V_{out} \\approx 0\\text{V}$ (**Logic LOW**).\n\n---\n\n### 4. Summary Truth Table\n\n| Input ($V_{in}$) | NMOS ($M_1$) | PMOS ($M_2$) | Output ($V_{out}$) | Logic State |\n| :--- | :--- | :--- | :--- | :--- |\n| **Low (0)** | OFF | ON | High ($V_{DD}$) | **1** |\n| **High (1)** | ON | OFF | Low (0V) | **0** |\n\n### 5. Key Characteristics\n*   **Inversion:** The circuit \"inverts\" the input signal; a 0 becomes a 1, and a 1 becomes a 0.\n*   **Low Static Power:** In a steady state (either High or Low), one of the two transistors is always OFF. This means there is no direct path from $V_{DD}$ to ground, resulting in extremely low static power consumption.\n*   **Rail-to-Rail Swing:** The output can swing fully from $0\\text{V}$ to $V_{DD}$, providing high noise margins.",
        "format": "markdown",
        "sha256": "6addaa130ed12a8d81639d6946328a7b1bb0969c87f18b657d59fb9d7692f4c1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and the complementary switching behavior. The additional operational analysis is consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1916,
        "total_tokens": 2209,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1073,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1916,
        "total_tokens": 2209,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1073,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**. It is the most fundamental building block of digital integrated circuits.\n\n### 2. Component Analysis\nThe circuit consists of two MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors) connected in a complementary fashion:\n*   **$M_1$ (PMOS Transistor):** Located at the top, connected between the supply voltage $V_{DD}$ and the output $V_{out}$. A PMOS transistor conducts when its gate voltage is low relative to its source.\n*   **$M_2$ (NMOS Transistor):** Located at the bottom, connected between the output $V_{out}$ and Ground. An NMOS transistor conducts when its gate voltage is high relative to its source.\n*   **$V_{in}$:** The common input signal connected to the gates of both transistors.\n*   **$V_{out}$:** The output node where the drains of both transistors are connected.\n\n### 3. Operational Analysis\nThe circuit operates based on the state of the input voltage $V_{in}$:\n\n*   **Case 1: $V_{in}$ is LOW (Logic 0 / Ground)**\n    *   **$M_1$ (PMOS)** is **ON** because the gate-to-source voltage is negative (below the threshold voltage).\n    *   **$M_2$ (NMOS)** is **OFF** because the gate-to-source voltage is $0\\text{V}$, which is below its threshold voltage.\n    *   Since $M_1$ is conducting and $M_2$ is an open circuit, the output $V_{out}$ is pulled up to **$V_{DD}$ (Logic 1)**.\n\n*   **Case 2: $V_{in}$ is HIGH (Logic 1 / $V_{DD}$)**\n    *   **$M_1$ (PMOS)** is **OFF** because the gate-to-source voltage is $0\\text{V}$, which is above its threshold voltage.\n    *   **$M_2$ (NMOS)** is **ON** because the gate-to-source voltage is $V_{DD}$, which is above its threshold voltage.\n    *   Since $M_2$ is conducting and $M_1$ is an open circuit, the output $V_{out}$ is pulled down to **Ground (Logic 0)**.\n\n### 4. Summary Table (Truth Table)\n\n| Input ($V_{in}$) | $M_1$ (PMOS) | $M_2$ (NMOS) | Output ($V_{out}$) | Logic State |\n| :--- | :--- | :--- | :--- | :--- |\n| Low ($0$) | ON | OFF | High ($V_{DD}$) | $0 \\rightarrow 1$ |\n| High ($V_{DD}$) | OFF | ON | Low ($0$) | $1 \\rightarrow 0$ |\n\n### Conclusion\nThe circuit performs the **logical NOT operation**. Whatever signal is put into $V_{in}$, the opposite signal is produced at $V_{out}$. This design is highly efficient because it consumes very little power in a steady state, as one of the two transistors is always \"off,\" preventing current from flowing directly from $V_{DD}$ to Ground.",
        "format": "markdown",
        "sha256": "53618ead8cbeeb275101a408ed1ead8a19e362960347d65ac4b8cc4605f5ef14"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary CMOS inverter; the figure has two NMOS devices, so the required device-identification rule assigns 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1698,
        "total_tokens": 1991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1698,
        "total_tokens": 1991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor Inverter). It is the most fundamental building block of digital integrated circuits.\n\n### 2. Component Analysis\nThe circuit consists of two MOSFETs connected in a complementary fashion:\n*   **$M_1$ (PMOS Transistor):** This is the \"pull-up\" transistor. Its source is connected to the supply voltage $V_{DD}$. A PMOS transistor conducts when its gate voltage is low relative to its source.\n*   **$M_2$ (NMOS Transistor):** This is the \"pull-down\" transistor. Its source is connected to ground (0V). An NMOS transistor conducts when its gate voltage is high relative to its source.\n*   **Input ($V_{in}$):** The gates of both transistors are tied together to the input signal.\n*   **Output ($V_{out}$):** The drains of both transistors are tied together to form the output node.\n\n### 3. Operational Analysis\nThe circuit operates as a logical **NOT gate**, meaning the output is always the opposite of the input.\n\n#### Case A: Input is LOW ($V_{in} \\approx 0\\text{V}$)\n*   **$M_1$ (PMOS):** The gate-to-source voltage ($V_{GS}$) is negative (approximately $-V_{DD}$), which turns the PMOS **ON**.\n*   **$M_2$ (NMOS):** The gate-to-source voltage ($V_{GS}$) is $0\\text{V}$, which is below the threshold voltage, turning the NMOS **OFF**.\n*   **Result:** The output $V_{out}$ is connected to $V_{DD}$ through the conducting $M_1$. Therefore, **$V_{out} = \\text{HIGH}$ ($V_{DD}$)**.\n\n#### Case B: Input is HIGH ($V_{in} \\approx V_{DD}$)\n*   **$M_1$ (PMOS):** The gate-to-source voltage ($V_{GS}$) is $0\\text{V}$, which turns the PMOS **OFF**.\n*   **$M_2$ (NMOS):** The gate-to-source voltage ($V_{GS}$) is positive (approximately $V_{DD}$), which turns the NMOS **ON**.\n*   **Result:** The output $V_{out}$ is connected to ground through the conducting $M_2$. Therefore, **$V_{out} = \\text{LOW}$ ($0\\text{V}$)**.\n\n### 4. Summary Truth Table\n\n| Input ($V_{in}$) | $M_1$ (PMOS) | $M_2$ (NMOS) | Output ($V_{out}$) | Logic State |\n| :--- | :--- | :--- | :--- | :--- |\n| Low (0) | ON | OFF | High ($V_{DD}$) | 1 |\n| High (1) | OFF | ON | Low (0) | 0 |\n\n### 5. Key Characteristics\n*   **Rail-to-Rail Swing:** The output can reach the full range from $0\\text{V}$ to $V_{DD}$.\n*   **Low Static Power Consumption:** In a steady state (either input is 0 or 1), one of the two transistors is always OFF. This means there is virtually no current flowing from $V_{DD}$ to ground, making CMOS circuits extremely power-efficient.\n*   **High Input Impedance:** Because the gates are insulated by a layer of oxide, almost no current flows into the input terminal.",
        "format": "markdown",
        "sha256": "b62368266e0fc61647479f7b52c8f50fe013ca277a84dfebe2213193250d52ad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as PMOS and analyzes the circuit as an ordinary CMOS inverter. Both devices are NMOS, so this violates the golden solution’s non-negotiable scoring gate.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 1935,
        "total_tokens": 2227,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1119,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 1935,
        "total_tokens": 2227,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1119,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor Inverter). It is the most fundamental building block of digital integrated circuits.\n\n### 2. Component Analysis\nThe circuit consists of two complementary MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors):\n*   **$M_1$ (PMOS Transistor):** Located at the top, connected between the supply voltage $V_{DD}$ and the output $V_{out}$. A PMOS transistor conducts when its gate voltage is low.\n*   **$M_2$ (NMOS Transistor):** Located at the bottom, connected between the output $V_{out}$ and ground (GND). An NMOS transistor conducts when its gate voltage is high.\n*   **$V_{in}$:** The common input signal connected to the gates of both transistors.\n*   **$V_{out}$:** The output node where the inverted signal is taken.\n\n### 3. Operational Logic\nThe circuit operates as a logical **NOT gate**. Its behavior depends on the input voltage $V_{in}$:\n\n*   **Case 1: Input is LOW ($V_{in} \\approx 0\\text{V}$)**\n    *   **$M_1$ (PMOS)** is **ON** because the gate-to-source voltage is negative (below the threshold).\n    *   **$M_2$ (NMOS)** is **OFF** because the gate-to-source voltage is zero (below the threshold).\n    *   The output $V_{out}$ is connected to $V_{DD}$ through the conducting $M_1$.\n    *   **Result:** $V_{out} = \\text{HIGH}$ (Logic 1).\n\n*   **Case 2: Input is HIGH ($V_{in} \\approx V_{DD}$)**\n    *   **$M_1$ (PMOS)** is **OFF** because the gate-to-source voltage is zero.\n    *   **$M_2$ (NMOS)** is **ON** because the gate-to-source voltage is high (above the threshold).\n    *   The output $V_{out}$ is pulled down to ground through the conducting $M_2$.\n    *   **Result:** $V_{out} = \\text{LOW}$ (Logic 0).\n\n### 4. Summary Table\n| Input ($V_{in}$) | $M_1$ (PMOS) | $M_2$ (NMOS) | Output ($V_{out}$) |\n| :--- | :--- | :--- | :--- |\n| Low (0) | ON | OFF | High (1) |\n| High (1) | OFF | ON | Low (0) |\n\n### 5. Key Characteristics\n*   **Complementary Action:** Only one transistor is \"ON\" at a time during steady-state operation, which means there is virtually no current flowing from $V_{DD}$ to ground. This results in **extremely low static power consumption**.\n*   **Full Swing:** The output can swing fully from $0\\text{V}$ to $V_{DD}$, providing high noise margins.\n*   **Inversion:** The primary function is to invert the input signal.",
        "format": "markdown",
        "sha256": "f1ecce6cb67fcf212383e9831a08f40e32bd84248c8cc2c95056b87baa8f605e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary complementary CMOS inverter. The golden solution requires recognizing that both devices are NMOS.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 1592,
        "total_tokens": 1884,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 860,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 1592,
        "total_tokens": 1884,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 860,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is a **Common-Source (CS) amplifier with a diode-connected PMOS load**. \n\n*   **$M_1$ (NMOS):** This transistor acts as the input stage. Its gate is connected to the input voltage $V_{in}$, and its source is grounded, making it a common-source configuration.\n*   **$M_2$ (PMOS):** This transistor acts as the load. Because its gate is connected to its own drain, it is \"diode-connected.\" A diode-connected MOSFET always operates in the **saturation region** (provided it is turned on), acting as a non-linear resistor or a current source.\n*   **$V_{DD}$:** The positive supply voltage.\n*   **$V_{out}$:** The output voltage node.\n\n### 2. Functional Analysis\nThe circuit operates by balancing the currents flowing through the two transistors. Since they are in series, the current through $M_1$ ($I_{D1}$) must equal the current through $M_2$ ($I_{D2}$).\n\n*   **Input Effect:** When the input voltage $V_{in}$ increases, the NMOS transistor $M_1$ becomes more conductive, increasing the current $I_{D1}$ flowing from the output node to the ground.\n*   **Output Response:** To maintain the current balance ($I_{D1} = I_{D2}$), the PMOS transistor $M_2$ must also allow more current to flow. For a PMOS, increasing the current requires making the gate-to-source voltage ($V_{GS2}$) more negative. Since the gate is tied to the output, $V_{GS2} = V_{out} - V_{DD}$. Therefore, $V_{out}$ must **decrease** to increase the current.\n*   **Inversion:** Because an increase in $V_{in}$ leads to a decrease in $V_{out}$, the circuit acts as an **inverting amplifier**.\n\n### 3. Mathematical Analysis (Voltage Gain)\nThe voltage gain ($A_v$) is defined as the change in output voltage relative to the change in input voltage:\n$$A_v = \\frac{dV_{out}}{dV_{in}}$$\n\nUsing the transconductance ($g_m$) of the transistors:\n1.  The current change in $M_1$ is $\\Delta I_{D1} = g_{m1} \\Delta V_{in}$.\n2.  The current change in $M_2$ is $\\Delta I_{D2} = g_{m2} \\Delta V_{GS2} = g_{m2} \\Delta V_{out}$.\n3.  Equating the two ($\\Delta I_{D1} = \\Delta I_{D2}$):\n    $$g_{m1} \\Delta V_{in} = g_{m2} \\Delta V_{out}$$\n    $$\\frac{\\Delta V_{out}}{\\Delta V_{in}} = \\frac{g_{m1}}{g_{m2}}$$\n\nHowever, since $V_{out}$ moves in the opposite direction of $V_{in}$, the gain is negative:\n$$A_v \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\n### Summary Table\n| Feature | Description |\n| :--- | :--- |\n| **Circuit Type** | Common-Source Amplifier |\n| **Load Type** | Diode-connected PMOS (Active Load) |\n| **Phase** | Inverting (180° phase shift) |\n| **Gain** | Proportional to the ratio of transconductances ($-g_{m1}/g_{m2}$) |\n| **Application** | Used in analog IC design as a basic gain stage or in the input stages of operational amplifiers. |",
        "format": "markdown",
        "sha256": "a16dcdd101ae680b9aaff9100d3943bf2f8928732b4aca29f20d4c9fac21582a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain −gm1/gm2, satisfying the full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 3484,
        "total_tokens": 3776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2645,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 3484,
        "total_tokens": 3776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2645,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is a **Common-Source (CS) amplifier** with an **active load**. \n\n*   **$M_1$ (NMOS):** This transistor acts as the input driver. It is configured in a common-source arrangement, where the input signal $V_{in}$ is applied to the gate, the source is grounded, and the output is taken from the drain.\n*   **$M_2$ (PMOS):** This transistor is **diode-connected** (its gate is connected to its drain). In this configuration, a MOSFET always operates in the **saturation region** (provided it is turned on). It serves as a non-linear active load, replacing a traditional passive resistor.\n\n### 2. How it Works\n*   **Input Stage:** When the input voltage $V_{in}$ increases, the gate-to-source voltage ($V_{GS1}$) of $M_1$ increases. This causes $M_1$ to conduct more current ($I_{D1}$).\n*   **Output Stage:** Since $M_1$ and $M_2$ are in series, the current flowing through $M_1$ must also flow through $M_2$. As $I_{D1}$ increases, it \"pulls down\" the voltage at the output node $V_{out}$.\n*   **Phase Inversion:** Because an increase in $V_{in}$ leads to a decrease in $V_{out}$, the circuit provides a **$180^\\circ$ phase shift** (inverting amplifier).\n\n### 3. Small-Signal Analysis (Voltage Gain)\nTo find the voltage gain ($A_v$), we look at the small-signal model:\n\n1.  **Load Resistance:** The output resistance of a diode-connected MOSFET is approximately $1/g_{m2}$ (where $g_{m2}$ is the transconductance of $M_2$), because the internal output resistance $r_{o2}$ is typically much larger than $1/g_{m2}$.\n2.  **Total Output Resistance:** The total resistance at the output node is the parallel combination of the output resistances of both transistors:\n    $$R_{out} = r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}} \\approx \\frac{1}{g_{m2}}$$\n3.  **Voltage Gain Formula:** The gain for a common-source amplifier is given by:\n    $$A_v = \\frac{V_{out}}{V_{in}} = -g_{m1} \\cdot R_{out} \\approx -g_{m1} \\cdot \\frac{1}{g_{m2}} = -\\frac{g_{m1}}{g_{m2}}$$\n\nSubstituting the formula for transconductance ($g_m = \\sqrt{2\\mu C_{ox} \\frac{W}{L} I_D$), the gain depends primarily on the ratio of the device sizes (Width/Length) and the mobility of the carriers:\n$$A_v \\approx -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n### 4. Summary Table\n| Feature | Description |\n| :--- | :--- |\n| **Topology** | Common-Source Amplifier |\n| **Load Type** | Active Load (Diode-connected PMOS) |\n| **Phase** | Inverting ($180^\\circ$ shift) |\n| **Key Advantage** | Higher gain and smaller area compared to using a passive resistor. |\n| **Gain** | Approximately the ratio of transconductances: $-g_{m1}/g_{m2}$ |",
        "format": "markdown",
        "sha256": "a7303ba82a43e17dd6a8d5eeec00de363d3b9deaacf8f136f291fdad5688e16d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain −gm1/gm2, with a consistent small-signal resistance approximation.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 1986,
        "total_tokens": 2278,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 1986,
        "total_tokens": 2278,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is a **Common-Source (CS) NMOS Amplifier with a diode-connected PMOS load**.\n\n*   **$M_1$ (NMOS):** This is the input transistor. It is configured as a common-source amplifier, where the input signal $V_{in}$ is applied to the gate, the source is grounded, and the output $V_{out}$ is taken from the drain.\n*   **$M_2$ (PMOS):** This transistor is \"diode-connected\" because its gate is connected to its drain. In this configuration, $M_2$ acts as an active load (a non-linear resistor) for $M_1$.\n*   **$V_{DD}$:** The positive supply voltage.\n\n### 2. Qualitative Operation\nThe circuit functions as an **inverting amplifier**. \n\n*   **When $V_{in}$ is low (below the threshold voltage $V_{th1}$):** $M_1$ is in the cutoff region (off). No current flows through the branch. Consequently, $V_{out}$ is pulled up toward $V_{DD}$ by the PMOS transistor.\n*   **When $V_{in}$ increases:** $M_1$ begins to conduct, increasing the current flowing from $V_{DD}$ to ground. As the current through $M_2$ increases, the voltage at the output node ($V_{out}$) must drop to maintain the current flow. Thus, as $V_{in}$ goes up, $V_{out}$ goes down.\n\n### 3. Small-Signal Analysis (Gain)\nTo find the voltage gain ($A_v$), we look at the small-signal model:\n\n1.  **Transconductance:** $M_1$ converts the input voltage $V_{in}$ into a current $i_{d1} = g_{m1} v_{in}$.\n2.  **Load Resistance:** The load consists of the diode-connected PMOS ($M_2$) in parallel with the output resistances of both transistors ($r_{o1}$ and $r_{o2}$). For a diode-connected MOSFET, the equivalent resistance is approximately $1/g_{m2}$.\n    $$R_{load} \\approx \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m2}}$$\n3.  **Voltage Gain Formula:**\n    $$A_v = \\frac{V_{out}}{V_{in}} = -g_{m1} \\cdot R_{load} \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\nSince $g_m = \\sqrt{2\\mu C_{ox} \\frac{W}{L} I_D}$ and both transistors share the same drain current ($I_{D1} = I_{D2}$), the gain can be expressed in terms of device geometry:\n$$A_v \\approx -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n*Where $\\mu_n, \\mu_p$ are the mobilities and $W/L$ are the aspect ratios of the NMOS and PMOS transistors, respectively.*\n\n### 4. Summary Table\n| Feature | Analysis |\n| :--- | :--- |\n| **Circuit Type** | Common-Source Amplifier |\n| **Load Type** | Active (Diode-connected PMOS) |\n| **Phase** | Inverting (180° phase shift) |\n| **Gain** | Approximately $-g_{m1}/g_{m2}$ |\n| **Key Advantage** | The gain is relatively independent of the bias current and $V_{DD}$ variations. |",
        "format": "markdown",
        "sha256": "4711869e22c57c48d9df3d278254e62c798d180388f5e1ba7fb3d2bf0b96dc76"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS with diode-connected PMOS load and gives the inverting gain −gm1/gm2, with a consistent output-resistance refinement. The extra qualitative remarks do not undermine the essential analysis.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 2302,
        "total_tokens": 2595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1470,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 2302,
        "total_tokens": 2595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1470,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor Inverter). It is the fundamental building block of digital logic circuits.\n\n### 2. Component Analysis\nThe circuit consists of two complementary MOSFETs:\n*   **$M_2$ (PMOS Transistor):** Located at the top, connected to the supply voltage $V_{DD}$. It acts as the **pull-up** device. A PMOS transistor conducts when its gate voltage is low relative to its source.\n*   **$M_1$ (NMOS Transistor):** Located at the bottom, connected to ground (0V). It acts as the **pull-down** device. An NMOS transistor conducts when its gate voltage is high relative to its source.\n*   **$V_{in}$:** The common input signal connected to the gates of both transistors.\n*   **$V_{out}$:** The output node located between the drains of the two transistors.\n\n### 3. Operational Analysis\nThe circuit operates based on the state of the input voltage $V_{in}$:\n\n#### Case A: $V_{in}$ is LOW (Logic 0 $\\approx 0\\text{V}$)\n*   **$M_1$ (NMOS):** The gate-to-source voltage ($V_{GS}$) is approximately $0\\text{V}$. Since this is below the threshold voltage, $M_1$ is **OFF** (non-conducting).\n*   **$M_2$ (PMOS):** The gate-to-source voltage is approximately $-V_{DD}$. This is sufficient to turn the PMOS **ON** (conducting).\n*   **Result:** The output $V_{out}$ is connected to $V_{DD}$ through $M_2$. Therefore, **$V_{out} \\approx V_{DD}$ (Logic 1)**.\n\n#### Case B: $V_{in}$ is HIGH (Logic 1 $\\approx V_{DD}$)\n*   **$M_1$ (NMOS):** The gate-to-source voltage is approximately $V_{DD}$. This is above the threshold voltage, so $M_1$ is **ON** (conducting).\n*   **$M_2$ (PMOS):** The gate-to-source voltage is approximately $0\\text{V}$. This is above the threshold voltage for a PMOS, so $M_2$ is **OFF** (non-conducting).\n*   **Result:** The output $V_{out}$ is connected to ground through $M_1$. Therefore, **$V_{out} \\approx 0\\text{V}$ (Logic 0)**.\n\n### 4. Summary Truth Table\n| Input ($V_{in}$) | $M_2$ (PMOS) | $M_1$ (NMOS) | Output ($V_{out}$) |\n| :--- | :--- | :--- | :--- |\n| Low (0) | ON | OFF | High (1) |\n| High (1) | OFF | ON | Low (0) |\n\n### Conclusion\nThe circuit performs the **logical NOT operation**. It \"inverts\" the input signal: if the input is high, the output is low, and vice versa. This is why it is called an **inverter**.",
        "format": "markdown",
        "sha256": "2c53cd77f1d83bb70464ce5a4e212524bc31625a742e23fec8c514d479ac644f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a CMOS inverter with an NMOS pull-down. Both devices are PMOS; M1 is a diode-connected PMOS load, and the circuit is a gm/gm amplifier, not a logic inverter.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 278,
        "output_tokens": 1618,
        "total_tokens": 1896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 878,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 278,
        "output_tokens": 1618,
        "total_tokens": 1896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 878,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor Inverter). It is the fundamental building block of digital integrated circuits and performs the logical **NOT** operation.\n\n### 2. Component Analysis\nThe circuit consists of two complementary MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors):\n\n*   **$M_2$ (PMOS Transistor):** This is a P-channel MOSFET. It is connected between the supply voltage ($V_{DD}$) and the output ($V_{out}$). It acts as the **pull-up** device.\n*   **$M_1$ (NMOS Transistor):** This is an N-channel MOSFET. It is connected between the output ($V_{out}$) and ground. It acts as the **pull-down** device.\n*   **Input ($V_{in}$):** The input signal is connected to the gates of both transistors.\n*   **Output ($V_{out}$):** The output is taken from the common drain node of both transistors.\n\n### 3. Operational Analysis\nThe circuit operates based on the switching states of the two transistors:\n\n#### Case A: Input is LOW ($V_{in} \\approx 0\\text{V}$)\n*   **NMOS ($M_1$):** The gate-to-source voltage ($V_{GS}$) is approximately $0\\text{V}$. Since this is below the threshold voltage ($V_{th,n}$), $M_1$ is **OFF** (cutoff).\n*   **PMOS ($M_2$):** The gate-to-source voltage is approximately $-V_{DD}$. Since this is more negative than the PMOS threshold voltage ($V_{th,p}$), $M_2$ is **ON** (conducting).\n*   **Result:** The output $V_{out}$ is connected to $V_{DD}$ through $M_2$. Therefore, **$V_{out} = \\text{HIGH}$**.\n\n#### Case B: Input is HIGH ($V_{in} \\approx V_{DD}$)\n*   **NMOS ($M_1$):** The gate-to-source voltage is approximately $V_{DD}$. This is above the threshold voltage, so $M_1$ is **ON** (conducting).\n*   **PMOS ($M_2$):** The gate-to-source voltage is approximately $0\\text{V}$. This is above the PMOS threshold voltage, so $M_2$ is **OFF** (cutoff).\n*   **Result:** The output $V_{out}$ is connected to ground through $M_1$. Therefore, **$V_{out} = \\text{LOW}$**.\n\n### 4. Summary Table\n| Input ($V_{in}$) | $M_2$ (PMOS) | $M_1$ (NMOS) | Output ($V_{out}$) | Logic State |\n| :--- | :--- | :--- | :--- | :--- |\n| Low ($0$) | ON | OFF | High ($V_{DD}$) | $1$ |\n| High ($1$) | OFF | ON | Low ($0$) | $0$ |\n\n### 5. Key Characteristics\n*   **Logical Function:** It implements the function $V_{out} = \\text{NOT}(V_{in})$.\n*   **Power Consumption:** In a steady state (either input high or low), one of the transistors is always off. This means there is virtually no direct current path from $V_{DD}$ to ground, resulting in **extremely low static power consumption**.\n*   **High Input Impedance:** Because the gates of the MOSFETs are insulated by a layer of silicon dioxide, the circuit draws almost no current from the input source.",
        "format": "markdown",
        "sha256": "89d01ca0e8642332073f47ba069a3a2e289029a318a8e2769ee382b9f534d3e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer fundamentally misidentifies the topology as a CMOS inverter with an NMOS pull-down. Both devices are PMOS; M1 is a diode-connected PMOS load, so the inverter operating cases and conclusions do not apply.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 278,
        "output_tokens": 1964,
        "total_tokens": 2242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1126,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 278,
        "output_tokens": 1964,
        "total_tokens": 2242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1126,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor inverter). It is the fundamental building block of digital logic circuits.\n\n### 2. Component Analysis\nThe circuit consists of two complementary MOSFETs:\n*   **$M_2$ (PMOS Transistor):** Located at the top, connected between the supply voltage ($V_{DD}$) and the output ($V_{out}$). It acts as the **pull-up** device.\n*   **$M_1$ (NMOS Transistor):** Located at the bottom, connected between the output ($V_{out}$) and ground. It acts as the **pull-down** device.\n*   **Input ($V_{in}$):** The gates of both transistors are tied together to a single input signal.\n*   **Output ($V_{out}$):** The drains of both transistors are tied together to form the output node.\n\n### 3. Operational Analysis\nThe circuit operates based on the threshold voltages of the transistors.\n\n#### Case A: Input is LOW ($V_{in} \\approx 0\\text{V}$)\n*   **NMOS ($M_1$):** The gate-to-source voltage ($V_{GS}$) is $0\\text{V}$. Since this is below the threshold voltage ($V_{th,n}$), $M_1$ is **OFF** (non-conducting).\n*   **PMOS ($M_2$):** The gate-to-source voltage is $0\\text{V} - V_{DD} = -V_{DD}$. This is strongly negative, which turns $M_2$ **ON** (conducting).\n*   **Result:** The output $V_{out}$ is connected to $V_{DD}$ through $M_2$. Therefore, **$V_{out} = \\text{HIGH}$**.\n\n#### Case B: Input is HIGH ($V_{in} \\approx V_{DD}$)\n*   **NMOS ($M_1$):** The gate-to-source voltage is $V_{DD}$. This is above the threshold voltage, so $M_1$ is **ON** (conducting).\n*   **PMOS ($M_2$):** The gate-to-source voltage is $V_{DD} - V_{DD} = 0\\text{V}$. Since this is above the PMOS threshold voltage (which is negative), $M_2$ is **OFF** (non-conducting).\n*   **Result:** The output $V_{out}$ is connected to ground through $M_1$. Therefore, **$V_{out} = \\text{LOW}$**.\n\n### 4. Summary Truth Table\n\n| Input ($V_{in}$) | $M_2$ (PMOS) | $M_1$ (NMOS) | Output ($V_{out}$) |\n| :--- | :--- | :--- | :--- |\n| **0 (Low)** | ON | OFF | **1 (High)** |\n| **1 (High)** | OFF | ON | **0 (Low)** |\n\n### Conclusion\nThe circuit performs the **logical NOT operation**. It \"inverts\" the input signal: a high input results in a low output, and a low input results in a high output. Because the transistors are complementary, the circuit consumes very little power when in a steady state, as one transistor is always off while the other is on, preventing a direct current path from $V_{DD}$ to ground.",
        "format": "markdown",
        "sha256": "68a3ef59b65a6521222e8464dcc1eae47f1206d943cc48e4993971b5d80b9887"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly identifies the circuit as a CMOS inverter with an NMOS pull-down and shared gates. Both devices are PMOS; M1 is a diode-connected PMOS load, and the key analysis is the gm/gm gain.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 279,
        "output_tokens": 1740,
        "total_tokens": 2019,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 965,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 279,
        "output_tokens": 1740,
        "total_tokens": 2019,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 965,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{\\text{out}}$ of the circuit shown in the figure, we will use small-signal analysis.\n\n### 1. Circuit Analysis\nThe circuit consists of two MOSFETs:\n*   **$M_2$ (PMOS):** Its gate is connected to a constant bias voltage $V_{b2}$, making it a current source with an output resistance $r_{o2}$.\n*   **$M_1$ (NMOS):** Its gate is connected to a constant bias voltage $V_{b1}$, and the output is taken from its source. This configuration is a **source follower** (common-drain amplifier).\n\n### 2. Small-Signal Model\nLet's define the small-signal parameters for the transistors:\n*   For $M_1$: transconductance $g_{m1}$ and output resistance $r_{o1}$.\n*   For $M_2$: output resistance $r_{o2}$.\n\nSince $V_{b1}$ and $V_{b2}$ are constant DC voltages, they act as AC grounds. The supply voltage $V_{DD}$ is also an AC ground.\n\n### 3. Deriving $R_{\\text{out}}$\nThe output resistance $R_{\\text{out}}$ is the resistance seen looking into the source of $M_1$. To find it, we apply a test voltage $v_{\\text{out}}$ at the output node and calculate the current $i_{\\text{test}}$ that must be supplied to the node.\n\nFrom the small-signal model of $M_1$, the current leaving the source is:\n$$i_{\\text{source}} = g_{m1} v_{GS1} + \\frac{v_{DS1}}{r_{o1}}$$\nGiven $v_{GS1} = v_{b1} - v_{\\text{out}} = 0 - v_{\\text{out}} = -v_{\\text{out}}$ and $v_{DS1} = v_X - v_{\\text{out}}$, we have:\n$$i_{\\text{source}} = -g_{m1} v_{\\text{out}} + \\frac{v_X - v_{\\text{out}}}{r_{o1}}$$\n\nNow, consider node $X$. The current flowing from $M_2$ into node $X$ is:\n$$i_{M2} = \\frac{V_{DD} - v_X}{r_{o2}} \\xrightarrow{\\text{AC}} \\frac{-v_X}{r_{o2}}$$\nBy Kirchhoff's Current Law (KCL) at node $X$, the current from $M_2$ must equal the current entering the drain of $M_1$. Since the current through the channel of $M_1$ is the same at the drain and source, we have $i_{M2} = i_{\\text{source}}$ (ignoring the small difference if we were to be extremely pedantic, but for a MOSFET, $i_d = i_s$).\n\nThus, we set $i_{\\text{source}} = i_{M2}$:\n$$\\frac{-v_X}{r_{o2}} = -g_{m1} v_{\\text{out}} + \\frac{v_X - v_{\\text{out}}}{r_{o1}}$$\n\nSolving for $v_X$:\n$$v_X \\left( \\frac{1}{r_{o2}} + \\frac{1}{r_{o1}} \\right) = v_{\\text{out}} \\left( g_{m1} + \\frac{1}{r_{o1}} \\right)$$\n$$v_X = v_{\\text{out}} \\frac{g_{m1} + 1/r_{o1}}{1/r_{o2} + 1/r_{o1}} = v_{\\text{out}} \\frac{(g_{m1} r_{o1} + 1) r_{o2}}{r_{o1} + r_{o2}}$$\n\nThe output resistance is $R_{\\text{out}} = \\frac{v_{\\text{out}}}{-i_{\\text{test}}}$. Since $i_{\\text{test}}$ is the current we inject into the output node, $i_{\\text{test}} = -i_{\\text{source}}$.\nUsing $i_{\\text{source}} = i_{M2} = \\frac{-v_X}{r_{o2}}$:\n$$i_{\\text{test}} = \\frac{v_X}{r_{o2}} = v_{\\text{out}} \\frac{g_{m1} r_{o1} + 1}{r_{o1} + r_{o2}}$$\n\nTherefore:\n$$R_{\\text{out}} = \\frac{v_{\\text{out}}}{i_{\\text{test}}} = \\frac{r_{o1} + r_{o2}}{g_{m1} r_{o1} + 1}$$\n\n### Final Result\nAssuming $g_{m1} r_{o1} \\gg 1$, the expression simplifies to:\n$$R_{\\text{out}} \\approx \\frac{r_{o1} + r_{o2}}{g_{m1} r_{o1}} = \\frac{1}{g_{m1}} \\left( 1 + \\frac{r_{o2}}{r_{o1}} \\right)$$\n\n**Summary:**\n*   If $r_{o2}$ is small (drain is nearly grounded), $R_{\\text{out}} \\approx \\frac{1}{g_{m1}}$.\n*   If $r_{o2}$ is very large (ideal current source), $R_{\\text{out}}$ increases significantly, proportional to the ratio of the output resistances of the two transistors.",
        "format": "markdown",
        "sha256": "1e0dfdbbbe18c3abb3e389c689f4402ebe5a57e082b96e3843ee5ec1aa3a3ae8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS source follower and gives the wrong output-resistance expression; the actual circuit is a PMOS cascode with M1 as the common-gate device. It gets limited credit for recognizing M2 as a bias current source and using small-signal test-source analysis.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 290,
        "output_tokens": 12354,
        "total_tokens": 12644,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 290,
        "output_tokens": 12354,
        "total_tokens": 12644,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{\\text{out}}$ of the given circuit, we will perform a small-signal analysis.\n\n### 1. Circuit Analysis\nThe circuit consists of two MOSFETs:\n*   **$M_2$** is a PMOS transistor acting as a current source, connected to the supply voltage $V_{DD}$. Its small-signal output resistance is $r_{o2}$.\n*   **$M_1$** is an NMOS transistor configured as a source-follower. Its small-signal parameters are transconductance $g_{m1}$ and output resistance $r_{o1}$.\n*   The output is taken from the source of $M_1$. We want to find the resistance $R_{\\text{out}}$ looking into this node.\n\n### 2. Small-Signal Model\nLet $v_{\\text{out}}$ be the small-signal voltage at the source of $M_1$ and $i_{\\text{out}}$ be the current flowing into the output node.\nFor the purpose of calculating $R_{\\text{out}}$, we set the gate voltages $v_{b1} = 0$ and $v_{b2} = 0$.\n\nThe current $i_{\\text{out}}$ flowing through $M_1$ can be expressed as:\n$$i_{\\text{out}} = g_{m1}(v_{g1} - v_{\\text{out}}) + \\frac{v_x - v_{\\text{out}}}{r_{o1}}$$\nSince $v_{g1} = 0$:\n$$i_{\\text{out}} = -g_{m1} v_{\\text{out}} + \\frac{v_x - v_{\\text{out}}}{r_{o1}} \\quad \\text{--- (Eq. 1)}$$\n\nNow, consider node $X$. The current $i_{\\text{out}}$ must also flow through $M_2$. The voltage at node $X$ relative to $V_{DD}$ (which is AC ground) is:\n$$v_x = -i_{\\text{out}} r_{o2} \\quad \\text{--- (Eq. 2)}$$\n\n### 3. Solving for $R_{\\text{out}}$\nSubstitute (Eq. 2) into (Eq. 1):\n$$i_{\\text{out}} = -g_{m1} v_{\\text{out}} + \\frac{-i_{\\text{out}} r_{o2} - v_{\\text{out}}}{r_{o1}}$$\n$$i_{\\text{out}} = -g_{m1} v_{\\text{out}} - \\frac{i_{\\text{out}} r_{o2}}{r_{o1}} - \\frac{v_{\\text{out}}}{r_{o1}}$$\n\nGroup the $i_{\\text{out}}$ terms on one side and $v_{\\text{out}}$ terms on the other:\n$$i_{\\text{out}} \\left( 1 + \\frac{r_{o2}}{r_{o1}} \\right) = -v_{\\text{out}} \\left( g_{m1} + \\frac{1}{r_{o1}} \\right)$$\n$$i_{\\text{out}} \\left( \\frac{r_{o1} + r_{o2}}{r_{o1}} \\right) = -v_{\\text{out}} \\left( \\frac{g_{m1} r_{o1} + 1}{r_{o1}} \\right)$$\n\nThe output resistance $R_{\\text{out}}$ is the magnitude of the ratio $v_{\\text{out}} / i_{\\text{out}}$:\n$$R_{\\text{out}} = \\left| \\frac{v_{\\text{out}}}{i_{\\text{out}}} \\right| = \\frac{r_{o1} + r_{o2}}{g_{m1} r_{o1} + 1}$$\n\n### Final Result\nThe output resistance is:\n$$R_{\\text{out}} = \\frac{r_{o1} + r_{o2}}{1 + g_{m1} r_{o1}}$$\n\n**Approximation:**\nIn most practical cases, $g_{m1} r_{o1} \\gg 1$, so the formula simplifies to:\n$$R_{\\text{out}} \\approx \\frac{r_{o1} + r_{o2}}{g_{m1} r_{o1}} = \\frac{1}{g_{m1}} \\left( 1 + \\frac{r_{o2}}{r_{o1}} \\right)$$",
        "format": "markdown",
        "sha256": "9aae3cafd936d4fae03399176cef967b20ea8832ff956a039d1d33d622866011"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly recognizes M2 as a PMOS current source, but misidentifies M1 as an NMOS source follower and places the output at its source. The actual circuit is a PMOS cascode with M1 as the common-gate device, so the derived low output resistance is fundamentally wrong.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 291,
        "output_tokens": 6108,
        "total_tokens": 6399,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 291,
        "output_tokens": 6108,
        "total_tokens": 6399,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{\\text{out}}$ of the given circuit, we need to analyze the resistance looking into the source of transistor $M_1$.\n\n### 1. Circuit Analysis\n* **Transistor $M_2$** is a PMOS transistor (indicated by the bubble at the gate and the source connected to $V_{DD}$). Its drain is connected to node $X$.\n* **Transistor $M_1$** is an NMOS transistor (indicated by the arrow at the source pointing outward). Its drain is connected to node $X$ and its source is the output node.\n* This configuration is known as a **complementary cascode**.\n\n### 2. Determining $R_{\\text{out}}$\nThe output resistance $R_{\\text{out}}$ is the resistance looking into the source of $M_1$. The general formula for the resistance looking into the source of a MOSFET is:\n$$R_{\\text{source}} \\approx \\frac{1}{g_m} + r_o + (g_m r_o) R_{\\text{drain}}$$\nwhere:\n* $g_m$ is the transconductance of the transistor.\n* $r_o$ is the output resistance (channel length modulation resistance) of the transistor.\n* $R_{\\text{drain}}$ is the resistance seen looking into the drain of the transistor.\n\nIn this circuit:\n* For $M_1$, the resistance looking into its drain is the resistance looking into the drain of $M_2$.\n* Since $M_2$ is a PMOS transistor with its source at $V_{DD}$, the resistance looking into its drain is simply its own output resistance, $r_{o2}$.\n* Therefore, $R_{\\text{drain}} = r_{o2}$.\n\nSubstituting these values into the source resistance formula for $M_1$:\n$$R_{\\text{out}} = \\frac{1}{g_{m1}} + r_{o1} + (g_{m1} r_{o1}) r_{o2}$$\n\n### 3. Simplification\nIn typical MOSFET operation, the term $(g_{m1} r_{o1}) r_{o2}$ is much larger than both $r_{o1}$ and $1/g_{m1}$ because the intrinsic gain $g_{m1} r_{o1}$ is typically much greater than 1. Therefore, we can approximate the output resistance as:\n$$R_{\\text{out}} \\approx g_{m1} r_{o1} r_{o2}$$\n\n**Final Answer:**\nThe output resistance is approximately:\n$$R_{\\text{out}} \\approx g_{m1} r_{o1} r_{o2}$$",
        "format": "markdown",
        "sha256": "96f118b4022acfa31051ada689aa2d44dfdb75df0676aee503a3db5b8e085ceb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The approximate result uses the correct cascode factor, gm1, but the answer misidentifies M1 as NMOS and reverses its source/drain role, so its analysis is of the wrong topology. The golden solution caps answers that analyze the devices as NMOS at 1.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 290,
        "output_tokens": 1786,
        "total_tokens": 2076,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1197,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 290,
        "output_tokens": 1786,
        "total_tokens": 2076,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1197,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that transistor $M_2$ is in the **saturation region**, we must look at the specific conditions required for a PMOS transistor (which $M_2$ is, given its source is connected to the positive supply $V_{DD}$).\n\n### 1. Identify the Transistor Type and Terminals\n*   **Type:** $M_2$ is a PMOS transistor.\n*   **Source ($S$):** Connected to $V_{DD}$.\n*   **Gate ($G$):** Connected to $V_{b2}$.\n*   **Drain ($D$):** Connected to node $X$.\n\n### 2. The Saturation Condition for PMOS\nFor a PMOS transistor to be in saturation, two conditions must be met:\n1.  **It must be ON:** The gate-to-source voltage must be sufficiently negative.\n    $$V_{GS} < V_{TP} \\quad \\text{or} \\quad V_{SG} > |V_{TP}|$$\n    *(Where $V_{TP}$ is the threshold voltage, which is negative for PMOS).*\n2.  **The Saturation Constraint:** The source-to-drain voltage ($V_{SD}$) must be greater than or equal to the \"overdrive voltage.\"\n    $$V_{SD} \\ge V_{SG} - |V_{TP}|$$\n\n### 3. Applying the Circuit Voltages\nLet's substitute the voltages from your figure into the saturation inequality:\n*   $V_{SD} = V_{DD} - V_X$\n*   $V_{SG} = V_{DD} - V_{b2}$\n\nPlugging these into the inequality:\n$$(V_{DD} - V_X) \\ge (V_{DD} - V_{b2}) - |V_{TP}|$$\n\n### 4. Simplifying the Expression\nSubtract $V_{DD}$ from both sides:\n$$-V_X \\ge -V_{b2} - |V_{TP}|$$\n\nMultiply by $-1$ (which flips the inequality sign):\n$$V_X \\le V_{b2} + |V_{TP}|$$\n\n### Summary\nTo ensure $M_2$ remains in saturation, the voltage at node **$X$** must be kept low enough such that:\n$$\\mathbf{V_X \\le V_{b2} + |V_{TP}|}$$\n\n**Physical Interpretation:**\nIn this circuit (likely a current source or a cascode stage), $M_1$ acts as a \"pull-down\" device. To keep $M_2$ in saturation, $M_1$ must be strong enough (or $V_{b1}$ must be high enough) to pull the voltage at node $X$ down below the critical threshold defined by the gate voltage $V_{b2}$ and the threshold voltage of $M_2$. If $V_X$ rises too high, $M_2$ will enter the **triode (linear) region**, and it will no longer act as an ideal current source.",
        "format": "markdown",
        "sha256": "68594c2f44027970198417c080801a365fcac29f3fba72a8013b287c1562900e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly identifies M2 as PMOS and derives its saturation condition, but does not relate VX to Vb1; it treats the VX–Vb2 condition as the design criterion, missing the essential control mechanism.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 298,
        "output_tokens": 1671,
        "total_tokens": 1969,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 298,
        "output_tokens": 1671,
        "total_tokens": 1969,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the PMOS transistor $\\mathbf{M_2}$ is in the **saturation region**, we must look at the relationship between its source, gate, and drain voltages.\n\n### 1. The Saturation Condition for PMOS\nFor a PMOS transistor to be in saturation, the source-to-drain voltage ($V_{SD}$) must be greater than or equal to the overdrive voltage ($V_{SG} - |V_{th,p}|$).\n\nIn the provided figure:\n*   **Source ($S$):** Connected to $V_{DD}$\n*   **Gate ($G$):** Connected to $V_{b2}$\n*   **Drain ($D$):** Node $X$\n\nThe condition is:\n$$V_{SD} \\ge V_{SG} - |V_{th,p}|$$\n\nSubstituting the voltages from the circuit:\n$$(V_{DD} - V_X) \\ge (V_{DD} - V_{b2}) - |V_{th,p}|$$\n\n### 2. Simplifying the Inequality\nIf we simplify the equation above, the $V_{DD}$ terms cancel out:\n$$-V_X \\ge -V_{b2} - |V_{th,p}|$$\nMultiplying by $-1$ (which flips the inequality sign):\n$$\\mathbf{V_X \\le V_{b2} + |V_{th,p}|}$$\n\nThis means that for $M_2$ to remain in saturation, the voltage at node $X$ must be kept **low enough**. If $V_X$ rises too high (approaching $V_{DD}$), $M_2$ will enter the triode (linear) region.\n\n### 3. How to Ensure This in the Circuit\nSince $V_X$ is the junction between $M_2$ (which pushes current up) and $M_1$ (which pulls current down), the value of $V_X$ is determined by the balance of currents between the two transistors.\n\nTo ensure $M_2$ stays in saturation, you must ensure that **$M_1$ is \"strong\" enough to pull node $X$ down**. This can be achieved by:\n\n1.  **Increasing $V_{b1}$:** Increasing the gate voltage of the NMOS ($M_1$) increases its conductance, pulling $V_X$ lower.\n2.  **Sizing $M_1$ larger:** Increasing the width-to-length ratio $(W/L)$ of $M_1$ allows it to sink more current, keeping $V_X$ low.\n3.  **Adjusting $V_{b2}$:** If $V_{b2}$ is too high, $M_2$ may turn off; if it is too low, $M_2$ may push so much current that $M_1$ cannot pull $V_X$ down sufficiently, potentially pushing $M_2$ out of saturation (though usually, a lower $V_{b2}$ makes the saturation condition $V_X \\le V_{b2} + |V_{th,p}|$ harder to satisfy).\n\n**Summary:** To keep $M_2$ in saturation, you must ensure that the current sink ($M_1$) is capable of maintaining the node voltage $V_X$ below the threshold $V_{b2} + |V_{th,p}|$.",
        "format": "markdown",
        "sha256": "15b481c720d0f92c354d2f32fd05025b2e0391f7b8942f938f15cae18c06a027"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly gives M2’s PMOS saturation condition, but misses that VX is set by Vb1 and incorrectly identifies M1 as NMOS; it treats Vb2 and the current balance as the control.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 298,
        "output_tokens": 2386,
        "total_tokens": 2684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1651,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 298,
        "output_tokens": 2386,
        "total_tokens": 2684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1651,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the transistor **$M_2$** is in the **saturation region**, we must look at the specific conditions required for a PMOS transistor (which $M_2$ is, given its connection to $V_{DD}$).\n\n### 1. Identify the Transistor Type and Terminals\n*   **Type:** $M_2$ is a PMOS transistor.\n*   **Source ($S$):** Connected to $V_{DD}$.\n*   **Gate ($G$):** Connected to $V_{b2}$.\n*   **Drain ($D$):** Connected to node $X$.\n\n### 2. The Saturation Condition for PMOS\nFor a PMOS transistor to be in saturation, two conditions must be met:\n1.  **It must be ON:** The source-to-gate voltage must be greater than the absolute value of the threshold voltage:\n    $$V_{SG} > |V_{th,p}| \\implies (V_{DD} - V_{b2}) > |V_{th,p}|$$\n2.  **Saturation Constraint:** The source-to-drain voltage ($V_{SD}$) must be greater than or equal to the \"overdrive voltage\" ($V_{SG} - |V_{th,p}|$):\n    $$V_{SD} \\ge V_{SG} - |V_{th,p}|$$\n\n### 3. Applying the Condition to the Figure\nSubstitute the node voltages from the circuit into the saturation inequality:\n*   $V_{SD} = V_{DD} - V_X$\n*   $V_{SG} = V_{DD} - V_{b2}$\n\nThe inequality becomes:\n$$(V_{DD} - V_X) \\ge (V_{DD} - V_{b2}) - |V_{th,p}|$$\n\nSimplifying the equation (subtracting $V_{DD}$ from both sides):\n$$-V_X \\ge -V_{b2} - |V_{th,p}|$$\nMultiplying by $-1$ (which flips the inequality sign):\n$$V_X \\le V_{b2} + |V_{th,p}|$$\n\n### Summary: How to ensure saturation\nTo ensure $M_2$ remains in saturation, you must ensure that the voltage at node **$X$** does not rise too high. Specifically:\n\n1.  **Control $V_{b2}$:** The bias voltage $V_{b2}$ must be set such that the gate is sufficiently low relative to $V_{DD}$ to turn the device on.\n2.  **Control $V_X$ via $M_1$:** Since $V_X$ is determined by the current-sinking capability of $M_1$, $M_1$ must be \"strong\" enough (via $V_{b1}$) to pull node $X$ down to a voltage lower than $V_{b2} + |V_{th,p}|$. \n\nIf $V_X$ rises above this limit, $M_2$ will enter the **triode (linear) region**, and it will no longer act as a constant current source.",
        "format": "markdown",
        "sha256": "19236e7acb836d42fa2dc82b30ec2ed9d620601f180d2aead571b038743fd36c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies M2 as PMOS and derives its saturation condition, and qualitatively notes that M1 and Vb1 set VX. It omits the relation VX = Vb1 + |VGS1| or an equivalent bound on Vb1, so it does not earn full credit.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 299,
        "output_tokens": 2006,
        "total_tokens": 2305,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1325,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 299,
        "output_tokens": 2006,
        "total_tokens": 2305,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1325,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, the circuit is an **NMOS Cascode Amplifier**. \n\nA cascode amplifier consists of a common-source (CS) stage followed by a common-gate (CG) stage. In this specific circuit, transistor $M_1$ is the CS stage and transistor $M_2$ is the CG stage.\n\n### 1. Circuit Components and Their Roles\n*   **$M_1$ (Input Transistor):** This transistor operates in a common-source configuration. It converts the input voltage $v_{in}$ into a current.\n*   **$M_2$ (Cascode Transistor):** This transistor operates in a common-gate configuration. Its gate is tied to a constant bias voltage $V_{b1}$. It acts as a \"current buffer\" that passes the current from $M_1$ to the output node.\n*   **$I_1$ (Current Source):** This provides the DC bias current for the entire branch, ensuring both transistors remain in the saturation region for linear amplification.\n*   **Node $X$:** This is the intermediate node between the two transistors.\n\n### 2. How it Works (Small-Signal Analysis)\n1.  **Input Stage:** A change in the input voltage $v_{in}$ changes the drain current of $M_1$.\n2.  **Cascode Stage:** Because $M_2$ is in series with $M_1$, the current flowing through $M_2$ is essentially the same as the current flowing through $M_1$.\n3.  **Output:** The current $I_1$ is forced through the output node $v_{out}$. Because the output impedance of a cascode structure is very high, small changes in current result in large changes in $v_{out}$, leading to high voltage gain.\n\n### 3. Key Advantages of the Cascode Configuration\nThe cascode architecture is used to solve two primary problems found in simple common-source amplifiers:\n\n*   **Mitigation of the Miller Effect:** In a standard CS amplifier, the capacitance between the gate and drain of $M_1$ is multiplied by the gain, significantly reducing the high-frequency bandwidth. In a cascode, $M_2$ keeps the voltage at node $X$ relatively constant. This \"shields\" $M_1$ from the output voltage swings, drastically reducing the Miller capacitance and **increasing the bandwidth**.\n*   **Increased Output Impedance:** The output impedance of a cascode is much higher than that of a single transistor. The output resistance is approximately:\n    $$R_{out} \\approx (g_{m2} r_{o2}) \\cdot r_{o1}$$\n    (where $g_m$ is transconductance and $r_o$ is the intrinsic output resistance). This high impedance allows for a **much higher voltage gain** when loaded.\n\n### Summary Table\n| Feature | Analysis |\n| :--- | :--- |\n| **Circuit Type** | NMOS Cascode Amplifier |\n| **Configuration** | Common-Source ($M_1$) $\\rightarrow$ Common-Gate ($M_2$) |\n| **Input** | $v_{in}$ at the gate of $M_1$ |\n| **Output** | $v_{out}$ at the drain of $M_2$ |\n| **Primary Benefit** | High gain and high bandwidth (reduced Miller effect) |\n| **Output Impedance** | Very High |",
        "format": "markdown",
        "sha256": "c00fc5d05a459c444aff4fa65cd1c52f4602e60c494d4a37084e4542bc6b93bd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and recognizes the boosted output resistance. However, it does not give the small-signal gain relation and overstates that node X stays relatively constant; with an ideal current-source load, X can still swing with the input.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 279,
        "output_tokens": 1853,
        "total_tokens": 2132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 279,
        "output_tokens": 1853,
        "total_tokens": 2132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, the circuit is a **Cascode Amplifier**. Specifically, it consists of a Common-Source (CS) stage followed by a Common-Gate (CG) stage.\n\nHere is a detailed analysis of the circuit:\n\n### 1. Circuit Topology and Components\n*   **$M_1$ (Common-Source Stage):** The input signal $v_{in}$ is applied to the gate of $M_1$. This transistor converts the input voltage into a varying current.\n*   **$M_2$ (Common-Gate Stage):** The gate of $M_2$ is connected to a constant bias voltage $V_{b1}$. $M_2$ acts as a current buffer that passes the current from $M_1$ to the output node.\n*   **$I_1$ (Current Source):** This provides a constant DC bias current to both transistors, ensuring they operate in the **saturation region** (the active region for amplification).\n*   **Node $X$:** This is the intermediate node between the drain of $M_1$ and the source of $M_2$.\n\n### 2. How it Works (Small-Signal Analysis)\n1.  **Input Stage:** When $v_{in}$ increases, the drain current of $M_1$ increases.\n2.  **Cascode Action:** Because $M_2$ is biased at a constant voltage $V_{b1}$, the voltage at node $X$ remains relatively constant regardless of the output voltage $v_{out}$. This effectively \"shields\" $M_1$ from the output.\n3.  **Output Stage:** The current changes produced by $M_1$ flow through $M_2$ and the current source $I_1$. Since the current source $I_1$ has a very high incremental resistance, the change in current creates a large voltage swing at $v_{out}$.\n\n### 3. Key Advantages of the Cascode Configuration\nThe cascode structure is used to overcome the limitations of a simple common-source amplifier:\n\n*   **High Voltage Gain:** The output resistance of a cascode is significantly higher than that of a single transistor. The total gain is approximately:\n    $$A_v \\approx -g_{m1} \\cdot (g_{m2} r_{o2} r_{o1})$$\n    This results in a much higher gain than a standard CS amplifier.\n*   **Elimination of the Miller Effect:** In a standard CS amplifier, the parasitic capacitance between the gate and drain is multiplied by the gain (the Miller effect), which severely limits the high-frequency bandwidth. In a cascode, the voltage gain from the gate of $M_1$ to node $X$ is very low ($\\approx -1$), which drastically reduces the effective input capacitance and **increases the bandwidth**.\n*   **High Output Impedance:** The output resistance is boosted by the intrinsic gain of $M_2$, making it an excellent current source or a high-impedance output stage.\n\n### Summary Table\n| Feature | Common-Source ($M_1$ only) | Cascode ($M_1 + M_2$) |\n| :--- | :--- | :--- |\n| **Gain** | Moderate | Very High |\n| **Output Impedance** | $r_{o1}$ | $\\approx g_{m2} r_{o2} r_{o1}$ (Much higher) |\n| **Bandwidth** | Limited by Miller Effect | High (Miller Effect suppressed) |\n| **Input Impedance** | Very High | Very High |",
        "format": "markdown",
        "sha256": "fbbd1e2f6ad48572369cdc115b7a1a29b8ae0c76cf1c844a2f15f1d0b1d10fb9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the common-source input stage and common-gate cascode and gives the accepted ideal-load gain, \u0002-g_{m1}g_{m2}r_{o1}r_{o2}\u0002; omitting body effect is allowed.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 279,
        "output_tokens": 2109,
        "total_tokens": 2388,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1341,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 279,
        "output_tokens": 2109,
        "total_tokens": 2388,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1341,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is an **NMOS Cascode Amplifier**. It consists of two NMOS transistors ($M_1$ and $M_2$) connected in series, with a constant current source ($I_1$) providing the bias current from the supply voltage ($V_{DD}$).\n\n### 2. Component Roles\n*   **$M_1$ (Input Transistor):** This is a common-source amplifier. It converts the input voltage $v_{in}$ into a varying current.\n*   **$M_2$ (Cascode Transistor):** This transistor is biased at a constant voltage $V_{b1}$. Its primary role is to act as a \"buffer\" or \"shield\" between the input transistor $M_1$ and the output node $v_{out}$.\n*   **$I_1$ (Current Source):** This ensures that the circuit operates at a specific bias point, keeping both transistors in the **saturation region** for linear amplification.\n*   **Node $X$:** This is the intermediate node between the two transistors.\n\n### 3. How it Works\n#### DC Analysis (Biasing)\nTo operate as an amplifier, both transistors must be in the saturation region. \n*   The current flowing through both $M_1$ and $M_2$ is fixed by the current source $I_1$.\n*   The voltage at node $X$ is determined by the bias voltage $V_{b1}$ and the gate-to-source voltage of $M_2$: $V_X = V_{b1} - V_{GS2}$.\n\n#### Small-Signal Analysis (Amplification)\nWhen a small signal $v_{in}$ is applied:\n1.  $M_1$ converts $v_{in}$ into a change in drain current.\n2.  Because $M_2$ has its gate fixed at $V_{b1}$, it behaves like a source-follower for the signal at node $X$. This keeps the voltage $v_X$ relatively constant, regardless of the output voltage $v_{out}$.\n3.  The output voltage $v_{out}$ is developed across the combined output resistance of the two transistors.\n\n### 4. Key Advantages of the Cascode Configuration\nThe cascode structure is used to overcome the limitations of a standard common-source amplifier:\n\n*   **Increased Output Impedance ($R_{out}$):** The cascode transistor $M_2$ significantly boosts the output resistance. The output impedance is approximately:\n    $$R_{out} \\approx (g_{m2} r_{o2}) \\cdot r_{o1}$$\n    where $g_m$ is the transconductance and $r_o$ is the output resistance of the individual transistors.\n*   **Higher Voltage Gain:** Since the gain of an amplifier is generally $A_v = -g_{m1} \\cdot R_{out}$, the massive increase in $R_{out}$ leads to a much higher voltage gain compared to a single-transistor stage.\n*   **Reduction of the Miller Effect:** In a standard common-source amplifier, the capacitance between the gate and drain ($C_{gd}$) is amplified by the gain, which severely limits the high-frequency response (bandwidth). In a cascode, the voltage gain from $v_{in}$ to node $X$ is very low, effectively \"killing\" the Miller effect and allowing the circuit to operate at much higher frequencies.\n\n### Summary Table\n| Feature | Common-Source | Cascode (This Circuit) |\n| :--- | :--- | :--- |\n| **Output Impedance** | Moderate ($r_{o1}$) | Very High ($\\approx g_{m2}r_{o2}r_{o1}$) |\n| **Voltage Gain** | Moderate | Very High |\n| **Bandwidth** | Limited by Miller Effect | Much Higher |\n| **Voltage Headroom** | High | Lower (requires two $V_{DS,sat}$ drops) |",
        "format": "markdown",
        "sha256": "bbf82902a34580dfb6dc0b485d64c0d5af9aa9b464c893ddebb5804718ec15c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the NMOS cascode and M1 common-source stage, and gives the appropriate approximate gain for an ideal current-source load. However, it mischaracterizes M2 as a source follower and claims node X stays nearly constant; with an ideal current-source load, X can swing substantially, so the common-gate behavior is not fully understood.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 279,
        "output_tokens": 1803,
        "total_tokens": 2082,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 929,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 279,
        "output_tokens": 1803,
        "total_tokens": 2082,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 929,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit shown in the figure is a cascode structure.**\n\nSpecifically, this is an **NMOS cascode amplifier**. Here is a breakdown of why it is classified as such:\n\n### 1. Circuit Configuration\nA cascode structure consists of two transistors stacked vertically:\n*   **The Input Stage ($M_1$):** This transistor is in a **Common-Source (CS)** configuration. The input signal $V_{in}$ is applied to the gate, and the source is grounded. It converts the input voltage into a current.\n*   **The Cascode Stage ($M_2$):** This transistor is in a **Common-Gate (CG)** configuration. Its source is connected to the drain of $M_1$, and its gate is held at a constant bias voltage ($V_{b1}$).\n\n### 2. How it Works\nIn a standard common-source amplifier, the high output impedance and the \"Miller effect\" (where the gate-drain capacitance is multiplied by the gain) limit the bandwidth and speed of the circuit. \n\nBy adding $M_2$ (the cascode transistor), the circuit achieves several advantages:\n*   **Reduction of the Miller Effect:** $M_2$ keeps the drain voltage of $M_1$ relatively constant. This prevents the large voltage swing at the output from appearing at the drain of $M_1$, significantly increasing the bandwidth.\n*   **Increased Output Impedance:** The cascode structure greatly increases the output resistance ($R_{out}$) of the amplifier, which allows for much higher voltage gain when paired with a load resistor $R_D$.\n*   **Better Isolation:** It provides better isolation between the input and the output.\n\n### Summary\nBecause it combines a **Common-Source** stage followed by a **Common-Gate** stage, it is a classic **cascode** amplifier.",
        "format": "markdown",
        "sha256": "eaba413b7f9aadb05c7da3e704c6a1d1017a5fc98286e4df547e8661712e99a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower, not a common-source stage, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 814,
        "total_tokens": 1110,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 814,
        "total_tokens": 1110,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit shown in the figure is a cascode structure.**\n\nSpecifically, it is an **NMOS cascode amplifier**. Here is a breakdown of why it is classified as such:\n\n1.  **The Configuration:** A cascode consists of two transistors stacked vertically. \n    *   **$M_1$ (Bottom Transistor):** This is configured as a **Common-Source (CS)** amplifier. It converts the input voltage $V_{in}$ into a current.\n    *   **$M_2$ (Top Transistor):** This is configured as a **Common-Gate (CG)** amplifier. Its gate is held at a constant bias voltage ($V_{b1}$), and it acts as a current buffer.\n\n2.  **How it Works:** The input signal enters $M_1$, which drives a current into the source of $M_2$. $M_2$ then passes this current up to the load resistor $R_D$ to produce the output voltage $V_{out}$.\n\n3.  **Key Advantages of this Structure:**\n    *   **Increased Output Impedance:** By adding $M_2$, the output impedance at $V_{out}$ is significantly increased compared to a simple common-source stage. This allows for much higher voltage gain when using a load resistor.\n    *   **Reduction of the Miller Effect:** In a standard CS amplifier, the capacitance between the gate and drain of $M_1$ is multiplied by the gain (Miller effect), which limits the bandwidth. In a cascode, the drain of $M_1$ is kept at a relatively constant voltage by $M_2$, effectively \"shielding\" the input from the output and greatly increasing the high-frequency response (bandwidth).",
        "format": "markdown",
        "sha256": "83ee02f7d0949be5fad686ee406914405b6a2f512e163a6ca53a522b57a9c134"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower with its drain grounded, not a common-source input device, so the structure lacks cascode output-resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 731,
        "total_tokens": 1027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 731,
        "total_tokens": 1027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the circuit shown in the figure is a cascode structure.**\n\nHere is a detailed explanation of why:\n\n### 1. Circuit Configuration\nA cascode amplifier consists of two transistors stacked in series:\n*   **The Input Stage ($M_1$):** This transistor is in a **Common-Source (CS)** configuration. The input signal $V_{in}$ is applied to its gate, and its source is connected to ground. It converts the input voltage into a current.\n*   **The Cascode Stage ($M_2$):** This transistor is in a **Common-Gate (CG)** configuration. Its gate is connected to a constant bias voltage ($V_{b1}$), and its source is connected to the drain of $M_1$.\n\n### 2. How it Works\nIn a standard common-source amplifier, the output voltage swings significantly, which creates a large capacitance between the gate and drain (the Miller effect), limiting the high-frequency bandwidth.\n\nIn this cascode structure:\n*   $M_2$ acts as a \"current buffer.\" Because the gate of $M_2$ is held at a constant voltage, the voltage at the drain of $M_1$ remains relatively constant.\n*   Since the drain of $M_1$ doesn't swing much, the **Miller effect is greatly reduced**, allowing for much higher bandwidth.\n\n### 3. Key Benefits of this Structure\n*   **Higher Output Impedance:** The output impedance at $V_{out}$ is significantly higher than that of a single transistor, which is very useful for creating high-gain amplifiers or precise current sources.\n*   **Increased Bandwidth:** By eliminating the Miller capacitance of the first stage, the circuit can operate at much higher frequencies.\n*   **Better Isolation:** It provides better isolation between the input and output stages.",
        "format": "markdown",
        "sha256": "bda23baf2a73343b2020627c87078ccd1a4c3ce8b4e4d652c57f1ac0a18c571b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a common-source device. M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 786,
        "total_tokens": 1082,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 393,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 786,
        "total_tokens": 1082,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 393,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the Miller effect is less pronounced in a cascode amplifier, we first need to define the Miller effect and then look at how the cascode architecture fundamentally changes the voltage gain of the input stage.\n\n### 1. What is the Miller Effect?\nThe Miller effect occurs in **inverting amplifiers** (like a Common-Source or Common-Emitter stage). It describes how a capacitance connected between the input and the output ($C_{gd}$) is \"amplified\" from the perspective of the input source.\n\nThe equivalent input capacitance $C_{in}$ is given by:\n$$C_{in(Miller)} = C_{gd} (1 + |A_v|)$$\nWhere $A_v$ is the voltage gain of the stage. \n\nIf the gain is high (e.g., $A_v = 100$), the input capacitance becomes 101 times larger than the actual physical capacitor. This creates a low-pass filter with the source resistance, severely limiting the **bandwidth** (high-frequency response) of the amplifier.\n\n---\n\n### 2. The Cascode Architecture\nA cascode consists of two transistors:\n1.  **The Input Stage:** A Common-Source (CS) transistor ($M_1$).\n2.  **The Cascode Stage:** A Common-Gate (CG) transistor ($M_2$) placed on top of the first.\n\nIn a standard CS amplifier, the drain of $M_1$ is connected to a high-impedance load (like a resistor or a current source). In a cascode, the drain of $M_1$ is connected to the **source** of $M_2$.\n\n---\n\n### 3. Why the Miller Effect is Reduced\n\nThe \"magic\" of the cascode lies in the **input impedance of the second stage**.\n\n#### A. The Gain of the First Stage is Slashed\nThe Miller effect depends entirely on the voltage gain ($A_v$) of the stage where the feedback capacitor is located. \n*   In a **single CS stage**, the load is very high, leading to a very high voltage gain. This results in a massive Miller capacitance.\n*   In a **Cascode**, the load for $M_1$ is the input impedance of the CG stage ($M_2$). The input impedance of a Common-Gate stage is very low (approximately $1/g_{m2}$).\n\nBecause $M_1$ is driving a very low impedance, its voltage gain is drastically reduced. The gain of the first stage becomes roughly:\n$$A_{v1} \\approx - \\frac{g_{m1}}{g_{m2}} \\approx -1$$\n\nPlugging this into the Miller formula:\n$$C_{in(Miller)} = C_{gd1} (1 + |-1|) = 2 \\cdot C_{gd1}$$\n\nInstead of the capacitance being multiplied by 100 or 1000, it is only multiplied by **2**. This effectively eliminates the dominant pole at the input.\n\n#### B. The Second Stage is Not Inverting\nThe second transistor ($M_2$) is in a Common-Gate configuration. In a CG stage, the input is the source and the output is the drain. The feedback capacitor ($C_{gd2}$) is connected between the output and the **gate**. \n\nSince the gate of $M_2$ is connected to a constant DC voltage (AC ground), there is no voltage swing at the gate. Therefore, there is no \"feedback\" of the output voltage to the input of the second stage. The Miller effect simply does not occur in the CG stage.\n\n---\n\n### Summary Comparison\n\n| Feature | Common-Source (CS) | Cascode (CS + CG) |\n| :--- | :--- | :--- |\n| **Load of Input Transistor** | High (Load Resistor) | Low (Source of $M_2$) |\n| **Gain of Input Stage** | Very High | Very Low ($\\approx 1$) |\n| **Miller Multiplication** | High ($1 + |A_v|$) | Low ($\\approx 2$) |\n| **Input Capacitance** | Huge $\\rightarrow$ Low Bandwidth | Small $\\rightarrow$ High Bandwidth |\n| **Overall Gain** | High | High (Gain is shifted to the 2nd stage) |\n\n**Final Verdict:** The cascode reduces the Miller effect by using a Common-Gate stage to \"shield\" the input transistor from the high voltage gain of the overall amplifier. It keeps the total gain high but prevents that gain from magnifying the input capacitance.",
        "format": "markdown",
        "sha256": "c97948603512f48c9d5accaf5e4c8a2bd6cd8965a43153d88fa2641a91ed9381"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2 presents a low impedance at M1’s drain, reducing the gain across Cgd1 to roughly −1 and its Miller multiplication to about 2 rather than the full cascode gain. The claim that this effectively eliminates the input pole is overstated, but the answer gives the correct mechanism and magnitude.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 1615,
        "total_tokens": 1643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 1615,
        "total_tokens": 1643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the Miller effect is less pronounced in a cascode amplifier, we first need to define the Miller effect and then look at how the cascode architecture fundamentally changes the voltage gain of the input stage.\n\n---\n\n### 1. What is the Miller Effect?\nThe Miller effect occurs in inverting amplifiers (like a Common-Source amplifier). If there is a capacitor ($C_{gd}$) connected between the input and the output of an inverting amplifier with a voltage gain of $-A_v$, the effective input capacitance ($C_{in}$) is increased.\n\nThe formula for the Miller capacitance is:\n$$C_{Miller} = C_{gd} (1 + |A_v|)$$\n\n**The Problem:** In a high-gain amplifier, $A_v$ is very large. This means a tiny parasitic capacitor ($C_{gd}$) is multiplied by the gain, creating a massive effective capacitance at the input. This forms a low-pass filter with the signal source, severely limiting the **bandwidth** and slowing down the amplifier.\n\n---\n\n### 2. The Cascode Architecture\nA cascode amplifier consists of two stages stacked on top of each other:\n1.  **A Common-Source (CS) stage** at the bottom.\n2.  **A Common-Gate (CG) stage** on top.\n\nIn a standard CS amplifier, the output is taken directly from the drain of the transistor. In a cascode, the output of the CS stage is connected to the **source** of the CG transistor.\n\n---\n\n### 3. Why the Miller Effect is Reduced\nThe Miller effect depends entirely on the **voltage gain seen by the capacitor**. \n\nIn a cascode, the capacitor we are worried about is the gate-drain capacitance ($C_{gd1}$) of the first (CS) transistor. For the Miller effect to occur, there must be a large voltage difference between the gate and the drain of that transistor.\n\n**Here is the key mechanism:**\n1.  **Low Input Impedance of the CG Stage:** The Common-Gate stage has a very low input impedance (approximately $1/g_m$). \n2.  **Voltage \"Clamping\":** Because the CG stage presents such a low impedance to the drain of the CS transistor, the voltage at the drain of the CS transistor remains relatively constant. It does not swing wildly in opposition to the input gate voltage.\n3.  **Low Local Gain:** The voltage gain from the gate of the CS transistor to its own drain is now very small (typically slightly greater than 1). \n\nBecause the gain ($A_v$) at the first stage is now very low, the Miller multiplication factor $(1 + |A_v|)$ is also very low.\n\n---\n\n### Summary Comparison\n\n| Feature | Common-Source (CS) | Cascode (CS + CG) |\n| :--- | :--- | :--- |\n| **Gain at $C_{gd}$** | High (Total gain of the stage) | Low (Only the gain of the CS part) |\n| **Miller Multiplier** | $(1 + \\text{High Gain})$ $\\rightarrow$ Huge | $(1 + \\text{Low Gain})$ $\\rightarrow$ Small |\n| **Input Capacitance** | Very High | Low (close to $C_{gs} + C_{gd}$) |\n| **Bandwidth** | Low (Limited by Miller) | High (Miller effect suppressed) |\n\n### Final Analogy\nImagine the Miller effect as a \"rubber band\" (the capacitor) stretching between the input and output. In a **CS amplifier**, the output moves far away from the input, stretching the rubber band and creating a huge force (capacitance) that pulls back on the input. \n\nIn a **Cascode**, the CG stage acts like a wall that prevents the output of the first stage from moving far. Since the \"rubber band\" never stretches, it exerts very little force on the input, allowing the signal to move much faster.",
        "format": "markdown",
        "sha256": "ea70e3ed62548e21e2449a2c5d62592cc1a8f7eda9e3c0e1f359074080f83759"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate device’s low input impedance as limiting the first transistor’s drain swing, reducing Miller multiplication. However, it overstates the reduction: the local gain is roughly unity, so the Cgd1 multiplier is about 2, not negligible or effectively absent.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 1446,
        "total_tokens": 1474,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 605,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 1446,
        "total_tokens": 1474,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 605,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the Miller effect is less pronounced in a cascode amplifier, we first need to define the Miller effect and then look at how the cascode architecture fundamentally changes the voltage gain at the critical node.\n\n### 1. What is the Miller Effect?\nThe Miller effect occurs in inverting amplifiers (like a Common-Source or Common-Emitter stage). If there is a capacitance $C_{gd}$ (gate-to-drain) connecting the input and output of an amplifier with a voltage gain of $-A_v$, the effective input capacitance $C_{in(Miller)}$ is:\n\n$$C_{in(Miller)} = C_{gs} + C_{gd}(1 + A_v)$$\n\nBecause $A_v$ is typically very large in a high-gain amplifier, the feedback capacitor $C_{gd}$ is \"multiplied\" by the gain. This creates a massive effective capacitance at the input, which forms a low-pass filter with the source resistance, severely limiting the **bandwidth** (high-frequency response) of the amplifier.\n\n---\n\n### 2. The Cascode Architecture\nA cascode consists of two transistors stacked vertically:\n1.  **The Input Stage:** A Common-Source (CS) transistor ($M_1$).\n2.  **The Output Stage:** A Common-Gate (CG) transistor ($M_2$).\n\nIn a standard CS amplifier, the drain of $M_1$ is the output node. In a cascode, the drain of $M_1$ is connected to the **source** of $M_2$.\n\n---\n\n### 3. Why the Miller Effect is Reduced\nThe key to the cascode is that it **decouples the input stage from the high-gain output node.**\n\n#### The \"Local\" Gain\nThe Miller effect depends on the gain seen **across the feedback capacitor**. In a cascode, the feedback capacitor is $C_{gd1}$ (the gate-to-drain capacitance of the first transistor). \n\nTo calculate the Miller capacitance, we only care about the gain from the gate of $M_1$ to the drain of $M_1$. Let's call this local gain $A_{v1}$.\n\n#### The Role of the Common-Gate (CG) Stage\nThe second transistor ($M_2$) is in a Common-Gate configuration. A CG stage has a very **low input impedance** (approximately $1/g_{m2}$). \n\nBecause the drain of $M_1$ is connected to the low-impedance source of $M_2$, the voltage at the drain of $M_1$ barely moves. Even though $M_1$ is trying to amplify the signal, the CG stage \"shunts\" the current, preventing a large voltage swing at that node.\n\nConsequently, the local gain $A_{v1}$ is very small (typically close to $-1$ or slightly more, but certainly not the high gain of the overall circuit).\n\n#### The Result\nPlugging this small local gain back into the Miller formula:\n$$C_{in(Miller)} = C_{gs1} + C_{gd1}(1 + |A_{v1}|)$$\n\nSince $|A_{v1}|$ is small, the multiplication factor is tiny. The $C_{gd1}$ capacitance is no longer amplified by the total gain of the amplifier, but only by the very small gain of the first stage.\n\n---\n\n### Summary Comparison\n\n| Feature | Standard Common-Source | Cascode (CS + CG) |\n| :--- | :--- | :--- |\n| **Node at Drain of $M_1$** | High Impedance (Output Node) | Low Impedance (Source of $M_2$) |\n| **Local Gain ($A_{v1}$)** | Very High | Very Low |\n| **Miller Multiplication** | $C_{gd} \\times (1 + \\text{Total Gain})$ | $C_{gd} \\times (1 + \\text{Small Local Gain})$ |\n| **Input Capacitance** | Huge $\\rightarrow$ Low Bandwidth | Small $\\rightarrow$ High Bandwidth |\n| **Overall Gain** | High | High (provided by $M_2$ and load) |\n\n**In short: The cascode suppresses the Miller effect by using a Common-Gate stage to keep the drain voltage of the input transistor nearly constant, thereby preventing the high overall gain of the circuit from \"multiplying\" the input capacitance.**",
        "format": "markdown",
        "sha256": "cf69673126156fa4088e0bb4bebbc218353d3fa31064be597d5293339e58f787"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance M2 source node and the reduced local gain across Cgd1, rather than the full output gain. It overstates the reduction: the local gain is roughly −1 and the Miller factor about 2, not tiny; the golden solution treats this overstatement as a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 1755,
        "total_tokens": 1783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 810,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 1755,
        "total_tokens": 1783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 810,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit is a **Common-Gate (CG) Amplifier**. \n\nIn a common-gate configuration, the input signal is applied to the **source** of the transistor, and the output is taken from the **drain**. The gate is connected to a constant bias voltage ($V_{b1}$), making it \"common\" to both the input and output.\n\n### 2. Component Analysis\n*   **$M_1$ (PMOS Transistor):** This transistor acts as an **active load**. It is biased with a constant voltage $V_{b2}$ at its gate to operate in the saturation region, effectively behaving as a constant current source. This increases the overall voltage gain of the circuit compared to a simple resistive load.\n*   **$M_2$ (NMOS Transistor):** This is the primary amplifying transistor. Its gate is held at a constant bias $V_{b1}$, and the input signal $V_{in}$ is applied to its source.\n*   **$V_{DD}$:** The positive supply voltage.\n*   **$V_{b1}, V_{b2}$:** Bias voltages used to set the quiescent operating point (the DC current flowing through the branch).\n\n### 3. Principle of Operation\nThe operation of the amplifier can be described as follows:\n1.  **Input Signal:** When the input voltage $V_{in}$ increases, the gate-to-source voltage of $M_2$ ($V_{GS2} = V_{b1} - V_{in}$) decreases.\n2.  **Current Modulation:** A decrease in $V_{GS2}$ leads to a decrease in the drain current $I_{D2}$ flowing through $M_2$.\n3.  **Output Response:** Since $M_1$ is a constant current source, it continues to push a steady current into the output node. When $I_{D2}$ decreases, the excess current from $M_1$ causes the voltage at the output node ($V_{out}$) to rise.\n4.  **Phase:** Because an increase in $V_{in}$ leads to an increase in $V_{out}$, the circuit provides a **non-inverting gain**.\n\n### 4. Key Characteristics\n*   **Voltage Gain ($A_v$):** The gain is typically high and positive. It is approximately given by:\n    $$A_v \\approx g_{m2} (r_{o1} \\parallel r_{o2})$$\n    where $g_{m2}$ is the transconductance of $M_2$, and $r_{o1}, r_{o2}$ are the output resistances of the two transistors.\n*   **Input Impedance ($R_{in}$):** The input impedance is very low, approximately $1/g_{m2}$. This makes common-gate amplifiers useful for matching with low-impedance sources or as \"cascode\" stages.\n*   **Output Impedance ($R_{out}$):** The output impedance is relatively high, determined by the parallel combination of the output resistances of $M_1$ and $M_2$ ($r_{o1} \\parallel r_{o2}$).\n\n### Summary Table\n| Feature | Analysis |\n| :--- | :--- |\n| **Topology** | Common-Gate Amplifier |\n| **Input Terminal** | Source of $M_2$ |\n| **Output Terminal** | Drain of $M_2$ |\n| **Phase** | Non-inverting (Input and Output are in phase) |\n| **Load Type** | Active Load (PMOS current source $M_1$) |\n| **Primary Use** | High-frequency amplification, impedance matching |",
        "format": "markdown",
        "sha256": "d9aedad5c8954e7970d9c4a5b4cde1fae97f01b8f2a2775fb6aa34b176366e21"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage, source input, bias voltages, PMOS current-source load, non-inverting operation, low input resistance, and the approximate gain gm2(ro1 || ro2).",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 3783,
        "total_tokens": 4075,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 3783,
        "total_tokens": 4075,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit is a **CMOS Common-Source Amplifier** with an **active load** and **source biasing**. It consists of two MOSFETs:\n*   **$M_1$ (PMOS Transistor):** Identified by the arrow pointing into the source. It is connected to the positive supply voltage $V_{DD}$.\n*   **$M_2$ (NMOS Transistor):** Identified by the arrow pointing out of the source. It is the input device of the amplifier.\n\n### 2. Component Roles\n*   **$M_1$ as an Active Load:** The gate of $M_1$ is connected to a constant bias voltage $V_{b2}$. When $M_1$ is operated in the saturation region, it acts as a constant current source. This provides a much higher output impedance compared to a standard resistor, which significantly increases the overall voltage gain of the amplifier.\n*   **$M_2$ as the Input Stage:** The input signal $V_{in}$ is applied to the gate of $M_2$. This transistor converts the input voltage variations into current variations.\n*   **Source Biasing ($V_{b1}$):** The source of $M_2$ is connected to a bias voltage $V_{b1}$ rather than ground. This is often done to set a specific operating point (quiescent current) or to provide some degree of negative feedback (source degeneration) to improve linearity and stability, although in this specific configuration, it primarily serves as a DC bias.\n\n### 3. Principle of Operation\nThe circuit operates based on the balance of currents between the two transistors:\n1.  **Current Balance:** Since $M_1$ and $M_2$ are in series, the current flowing through them must be equal ($I_{D1} = I_{D2}$).\n2.  **Input Effect:** When the input voltage $V_{in}$ increases, the gate-to-source voltage ($V_{GS2} = V_{in} - V_{b1}$) of the NMOS transistor $M_2$ increases. This causes $M_2$ to conduct more current.\n3.  **Output Response:** Because $M_1$ is acting as a constant current source, it cannot easily increase its current to match the increase in $I_{D2}$. To maintain the current balance, the output voltage $V_{out}$ must drop.\n4.  **Phase Inversion:** Because an increase in $V_{in}$ leads to a decrease in $V_{out}$, the circuit provides a **180-degree phase shift** (inverting amplifier).\n\n### 4. Summary Table\n| Feature | Description |\n| :--- | :--- |\n| **Topology** | Common-Source Amplifier |\n| **Input** | $V_{in}$ (Gate of $M_2$) |\n| **Output** | $V_{out}$ (Drains of $M_1$ and $M_2$) |\n| **Load Type** | Active Load (PMOS $M_1$) |\n| **Gain Polarity** | Negative (Inverting) |\n| **Purpose of $V_{b1}, V_{b2}$** | To establish the DC operating point (biasing) |",
        "format": "markdown",
        "sha256": "cdb95a351e3215094530cf356783d1c8a0ea08da16d966a7d5b37af75b3efcc7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly places Vin at M2's gate and identifies the circuit as an inverting common-source stage. The actual circuit is a non-inverting common-gate NMOS stage with Vin at M2's source; this topology error earns 0.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1937,
        "total_tokens": 2230,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1937,
        "total_tokens": 2230,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is a **Common-Gate (CG) Amplifier** with an active load. \n\n*   **$M_1$ (PMOS Transistor):** This transistor is configured as a **current source load**. Since its gate is connected to a constant bias voltage $V_{b2}$, it provides a relatively stable DC current to the output node.\n*   **$M_2$ (NMOS Transistor):** This is the amplifying element. It is in a **common-gate configuration** because the input signal $V_{in}$ is applied to the source, the output $V_{out}$ is taken from the drain, and the gate is held at a constant bias voltage $V_{b1}$.\n\n### 2. DC Analysis (Biasing)\nThe bias voltages $V_{b1}$ and $V_{b2}$ are used to set the operating point (Q-point) of the transistors to ensure they both operate in the **saturation region**, which is necessary for linear amplification.\n*   $V_{b2}$ controls the current $I_{D1}$ flowing through $M_1$.\n*   $V_{b1}$ and $V_{in}$ together determine the gate-source voltage $V_{GS2} = V_{b1} - V_{in}$, which controls the current $I_{D2}$ flowing through $M_2$.\n*   In steady state, the current through both transistors must be equal ($I_{D1} = I_{D2}$).\n\n### 3. AC Analysis (Small-Signal Behavior)\nIn a common-gate amplifier, the signal flows from the source to the drain.\n\n*   **Voltage Gain ($A_v$):** The common-gate amplifier is **non-inverting**. An increase in $V_{in}$ increases the source-gate voltage $V_{SG2}$, which increases the drain current $I_{D2}$. This increased current causes a larger voltage drop across the load ($M_1$), thereby increasing $V_{out}$.\n    The approximate voltage gain is given by:\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx g_{m2}(r_{o1} \\parallel r_{o2})$$\n    where $g_{m2}$ is the transconductance of $M_2$, and $r_{o1}, r_{o2}$ are the output resistances of the two transistors.\n\n*   **Input Impedance ($R_{in}$):** One of the defining characteristics of a CG amplifier is its **low input impedance**. It is approximately:\n    $$R_{in} \\approx \\frac{1}{g_{m2}}$$\n    This makes it useful for matching with low-impedance sources.\n\n*   **Output Impedance ($R_{out}$):** The output impedance is **high**, as it is the parallel combination of the output resistances of the two transistors:\n    $$R_{out} \\approx r_{o1} \\parallel r_{o2}$$\n\n### Summary Table\n| Parameter | Characteristic | Value/Behavior |\n| :--- | :--- | :--- |\n| **Topology** | Common-Gate (CG) | Non-inverting |\n| **Input Node** | Source of $M_2$ | Low Impedance ($\\approx 1/g_{m2}$) |\n| **Output Node** | Drain of $M_2$ | High Impedance ($\\approx r_{o1} \\parallel r_{o2}$) |\n| **Load** | PMOS Current Source | High gain, stable DC current |\n| **Phase** | Non-inverting | $V_{in} \\uparrow \\implies V_{out} \\uparrow$ |\n\n**Typical Application:** This configuration is most commonly used as the second stage in a **Cascode Amplifier**, where it follows a common-source stage to increase the output impedance and bandwidth (by reducing the Miller effect).",
        "format": "markdown",
        "sha256": "f551551de0ce4002ae8f2b5496ea012ad357eba5ab63e96a1d20dc39cddbc2cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate topology, biasing, non-inverting gain, gain expression, and low input resistance. However, its explanation reverses the NMOS current response: raising the source input lowers VGS and drain current, which makes the output rise.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 3664,
        "total_tokens": 3956,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 3664,
        "total_tokens": 3956,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to identify the number of independent energy storage elements (capacitors) that create independent nodes in the circuit. In a linear circuit, the number of poles is equal to the number of independent capacitors (or inductors) that cannot be simplified into a single equivalent capacitor.\n\n1.  **Identify the nodes:**\n    *   **Node 1 (Gate of $M_1$):** This node is connected to the input $V_{in}$ through resistor $R_S$. It has a capacitor $C_{GS}$ connected to ground and a capacitor $C_{GD}$ connected to the output node.\n    *   **Node 2 (Output $V_{out}$):** This node is the drain of both $M_1$ and $M_2$. It has several capacitors connected to ground: $C_{DB}$, $C_{DB2}$, and $C_{GD2}$ (since the gate of $M_2$ is grounded).\n\n2.  **Analyze the capacitors:**\n    *   The capacitors $C_{DB}$, $C_{DB2}$, and $C_{GD2}$ are all in parallel, connected between the output node $V_{out}$ and ground. They can be combined into a single equivalent capacitor $C_{out} = C_{DB} + C_{DB2} + C_{GD2}$.\n    *   The capacitor $C_{GS}$ is connected between the gate node and ground.\n    *   The capacitor $C_{GD}$ is a coupling capacitor between the gate node and the output node.\n\n3.  **Determine the order of the system:**\n    *   We have two distinct nodes that have capacitance to ground: the gate of $M_1$ and the output node $V_{out}$.\n    *   Because there are two independent nodes with capacitive energy storage, the system is of the second order.\n    *   A second-order system has a characteristic equation (denominator of the transfer function) that is a quadratic polynomial in $s$, which means it has **2 poles**.\n\n**Conclusion:**\nThe circuit has **2 poles**.",
        "format": "markdown",
        "sha256": "8f3ed19496833b85483dfa7f109219050a706d942ab99f2e320045776e3f751d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two capacitive nodes—the M1 gate and output—and assigns the relevant capacitors to them, concluding there are two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 1487,
        "total_tokens": 1788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 1487,
        "total_tokens": 1788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the circuit, we need to identify the number of independent energy storage elements (capacitors) that create distinct nodes in the system. In a linear circuit, the number of poles in the transfer function is equal to the number of independent state variables, which corresponds to the number of non-redundant capacitive nodes.\n\nLet's analyze the nodes in the provided circuit:\n\n1.  **Node 1 (Gate of $M_1$):** This node has a capacitance $C_{GS}$ to ground and is connected to the input $V_{in}$ through resistor $R_S$. It also has $C_{GD}$ connecting it to the next stage. This creates the **first pole**.\n2.  **Node 2 (Drain of $M_1$ / Source of $M_2$):** This node has a capacitance $C_{DB}$ to ground and is connected to Node 1 via $C_{GD}$. Because it is a distinct point in the circuit with its own capacitive load, it creates the **second pole**.\n3.  **Node 3 (Drain of $M_2$ / $V_{out}$):** This node has two capacitors connected to ground: $C_{DB2}$ and $C_{GD2}$ (since the gate of $M_2$ is grounded). These two capacitors are in parallel, effectively acting as a single capacitive load at this node. This creates the **third pole**.\n\nSince there are three distinct capacitive nodes that cannot be simplified into one another, the system is described by a third-order differential equation.\n\n**Conclusion:**\nThe circuit has **3 poles**.",
        "format": "markdown",
        "sha256": "368863a71188e5c5ef37bac1017c976912d50c968ae65f0f93296c0867e17d60"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The circuit has two poles, not three: the only independent dynamic nodes are the gate of M1 and the output. The answer invents a separate drain-M1/source-M2 node, misreading the current-source load, though it identifies some relevant capacitances.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 1862,
        "total_tokens": 2163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1515,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 1862,
        "total_tokens": 2163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1515,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the circuit, we need to identify the number of independent energy-storage elements (capacitors) that create distinct time constants in the system. In a linear circuit, the number of poles is equal to the number of independent nodes that have a capacitance to ground or to another node.\n\n1.  **Identify the Capacitive Nodes:**\n    *   **Node 1 (Gate of $M_1$):** This node is connected to the input $V_{in}$ through the resistor $R_S$. It has a capacitor $C_{GS}$ connected to ground and a capacitor $C_{GD}$ connected to the output node $V_{out}$.\n    *   **Node 2 (Output Node $V_{out}$):** This node is the drain of $M_1$ and the drain of $M_2$. It has several capacitors connected to ground: $C_{DB}$, $C_{GD2}$ (since the gate of $M_2$ is grounded), and $C_{DB2}$. It is also connected to Node 1 via $C_{GD}$.\n\n2.  **Analyze the System Order:**\n    *   The circuit has two primary nodes where charge can be stored: the gate of $M_1$ and the output node $V_{out}$.\n    *   The input $V_{in}$ is an ideal voltage source, so it does not add a pole.\n    *   The resistors and MOSFETs (acting as transconductances or loads) provide the dissipative elements that, combined with the capacitors, create the poles.\n    *   Since there are **two independent capacitive nodes**, the system is described by two first-order differential equations. This means the transfer function of the circuit will have a second-order denominator.\n\nTherefore, the circuit has **2 poles**.",
        "format": "markdown",
        "sha256": "0e90d605891859b5884dc4a0a889de8fd3cf7049c0f79b16b9dfcad9626a82a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two capacitive nodes—the M1 gate and output—and assigns the capacitors to the right nodes, concluding there are two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 3744,
        "total_tokens": 4045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 3744,
        "total_tokens": 4045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is an **NMOS Cascode Amplifier**. \n\nA cascode amplifier consists of a common-source (CS) stage followed by a common-gate (CG) stage. In this specific configuration:\n*   **$M_1$** acts as the **Common-Source** amplifier.\n*   **$M_2$** acts as the **Common-Gate** amplifier.\n*   **$R_D$** is the drain load resistor connected to the supply voltage $V_{DD}$.\n\n### 2. How it Works\n*   **Input Stage ($M_1$):** The input voltage $V_{in}$ is applied to the gate of $M_1$. This transistor converts the input voltage into a current $i_d$ flowing from the drain of $M_2$ to ground.\n*   **Cascode Stage ($M_2$):** The gate of $M_2$ is tied to the same input $V_{in}$. $M_2$ acts as a \"current buffer.\" It takes the current generated by $M_1$ and passes it through to the load resistor $R_D$ with very little change in current, but it significantly alters the impedance seen at the output.\n*   **Output Stage:** The output voltage $V_{out}$ is developed across the resistor $R_D$. As the input voltage $V_{in}$ increases, the current $i_d$ increases, causing a larger voltage drop across $R_D$, which lowers $V_{out}$. Thus, the circuit provides an **inverting gain**.\n\n### 3. Key Advantages of the Cascode Configuration\nThe cascode arrangement is used in high-performance analog design to solve several problems found in simple common-source amplifiers:\n\n*   **Reduction of the Miller Effect:** In a standard CS amplifier, the capacitance between the gate and drain ($C_{gd}$) is multiplied by the gain, creating a large input capacitance that limits high-frequency response. In a cascode, the drain of $M_1$ is held at a relatively constant voltage by $M_2$, which drastically reduces the Miller effect and **increases the bandwidth** of the amplifier.\n*   **High Output Impedance:** The output impedance of a cascode stage is much higher than that of a single transistor. It is approximately:\n    $$R_{out} \\approx (g_{m2} r_{o2}) \\cdot r_{o1}$$\n    where $g_m$ is the transconductance and $r_o$ is the output resistance of the MOSFETs. This makes it an excellent current source.\n*   **Increased Voltage Gain:** Because the output impedance is so high, if a very large load resistor $R_D$ is used, the overall voltage gain is significantly higher than that of a single-stage amplifier.\n\n### 4. Summary Table\n| Feature | Analysis |\n| :--- | :--- |\n| **Topology** | Cascode (CS $\\rightarrow$ CG) |\n| **Input** | $V_{in}$ (applied to both gates) |\n| **Output** | $V_{out}$ (taken from drain of $M_2$) |\n| **Phase** | Inverting (Input $\\uparrow$, Output $\\downarrow$) |\n| **Primary Benefit** | High bandwidth (low Miller effect) and high output impedance |\n| **Approx. Gain** | $A_v \\approx -g_{m1} (R_{out} \\parallel R_D)$ |",
        "format": "markdown",
        "sha256": "d5fcebe7a353fe8ba8c51be5a36085a07139126b225619b0c7a5c8a63b29dbb7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the common-gate-driven series pair as a true cascode and applies the cascode output-resistance mechanism. It misses that M1 operates in triode and that the devices act approximately like one NMOS with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 1792,
        "total_tokens": 2088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1018,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 1792,
        "total_tokens": 2088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1018,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is a **modified cascode amplifier**. It consists of two NMOS transistors, $M_1$ and $M_2$, connected in series (a cascode configuration), with a load resistor $R_D$ connected to a supply voltage $V_{DD}$. \n\nThe unique feature of this specific circuit is that **both transistors share the same input signal $V_{in}$** at their gates. In a standard cascode amplifier, the gate of the upper transistor ($M_2$) is typically connected to a constant DC bias voltage.\n\n### 2. Qualitative Operation\n*   **Inverting Nature:** As the input voltage $V_{in}$ increases, both $M_1$ and $M_2$ are turned on more strongly. This increases the drain current $I_D$ flowing through the branch. Since $V_{out} = V_{DD} - I_D R_D$, an increase in $V_{in}$ leads to a decrease in $V_{out}$. Therefore, this is an **inverting amplifier**.\n*   **Transistor Roles:** \n    *   $M_1$ acts as a common-source amplifier.\n    *   $M_2$ acts as a common-gate amplifier, but because its gate is also driven by $V_{in}$, it behaves like a source-follower that \"tracks\" the input.\n\n### 3. Small-Signal Analysis\nTo find the voltage gain, we look at the small-signal behavior (where $v_{in}$ and $v_{out}$ are small fluctuations around the DC operating point).\n\n*   **Drain Current:** The current $i_d$ flowing through the branch is primarily determined by the transconductance of $M_1$ ($g_{m1}$):\n    $$i_d \\approx g_{m1} v_{in}$$\n*   **Output Voltage:** The output voltage is the voltage drop across the resistor $R_D$:\n    $$v_{out} = -i_d R_D \\approx -g_{m1} R_D v_{in}$$\n*   **Voltage Gain ($A_v$):**\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx -g_{m1} R_D$$\n    Interestingly, the low-frequency gain is approximately the same as a simple common-source amplifier with a single transistor and resistor $R_D$.\n\n### 4. The \"Magic\" of this Configuration: Miller Effect Reduction\nThe primary reason for using this specific configuration is to increase the **bandwidth** by reducing the **Miller effect**.\n\nIn a standard common-source amplifier, the capacitance between the gate and drain ($C_{gd}$) is multiplied by the gain, creating a large input capacitance that slows down the circuit. In this circuit, let's look at the voltage at the drain of $M_1$ ($v_{D1}$):\n$$v_{D1} \\approx v_{in} - \\frac{i_d}{g_{m2}} \\approx v_{in} \\left( 1 - \\frac{g_{m1}}{g_{m2}} \\right)$$\n\n*   **If $g_{m1} \\approx g_{m2}$**, then $v_{D1} \\approx 0$.\n*   This means the drain of $M_1$ acts as an **AC ground**. \n*   Because the voltage at the drain does not move significantly relative to the gate, the Miller effect on $C_{gd1}$ is almost entirely eliminated.\n\n### Summary Table\n| Parameter | Analysis |\n| :--- | :--- |\n| **Circuit Type** | Modified Cascode Amplifier |\n| **Phase** | Inverting |\n| **Approx. Gain** | $-g_{m1} R_D$ |\n| **Key Advantage** | High bandwidth due to minimized Miller effect |\n| **Design Benefit** | Achieves cascode benefits without needing an extra DC bias source for $M_2$ |",
        "format": "markdown",
        "sha256": "0d06b4af8e36544dd1f3fc034f03818ac9d106c370d9014e7ccbe31d1d38d361"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly recognizes the shared gate drive and the inverting trend with a resistive load, but misanalyzes the stack as a cascode/Miller-reduction stage and misses that M1 is in triode, so the pair behaves approximately like a longer-channel NMOS.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 297,
        "output_tokens": 5238,
        "total_tokens": 5535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 297,
        "output_tokens": 5238,
        "total_tokens": 5535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is an **NMOS Cascode Amplifier**. A cascode consists of a common-source amplifier ($M_1$) followed by a common-gate amplifier ($M_2$). \n\nHowever, this specific implementation is unique because the gates of both transistors ($M_1$ and $M_2$) are tied together and driven by the same input signal, $V_{in}$. In a standard cascode, the gate of $M_2$ is typically connected to a constant DC bias voltage.\n\n### 2. Component Breakdown\n*   **$M_1$ (Input Transistor):** Acts as a common-source amplifier. It converts the input voltage $V_{in}$ into a current.\n*   **$M_2$ (Cascode Transistor):** Acts as a current buffer. It allows the current from $M_1$ to pass through to the load while shielding $M_1$ from the output voltage swings.\n*   **$R_D$ (Drain Resistor):** The load resistor that converts the output current back into a voltage $V_{out}$.\n*   **$V_{DD}$:** The positive supply voltage.\n\n### 3. Functional Analysis\n\n#### **Voltage Gain**\nThe overall voltage gain ($A_v$) of this circuit is approximately the same as a simple common-source amplifier:\n$$A_v \\approx -g_{m1} R_D$$\nWhere $g_{m1}$ is the transconductance of transistor $M_1$. The negative sign indicates a phase inversion (an increase in $V_{in}$ leads to a decrease in $V_{out}$).\n\n#### **Output Impedance**\nOne of the primary reasons for using a cascode structure is to increase the output impedance. The resistance looking into the drain of $M_2$ is significantly higher than that of a single transistor:\n$$R_{out(M1,M2)} \\approx (g_{m2} r_{o2}) r_{o1}$$\nBecause this high impedance is in parallel with $R_D$, the total output impedance is dominated by $R_D$, but the high intrinsic impedance of the transistor pair ensures that the gain remains stable and the output is less sensitive to variations in the transistors' internal resistances ($r_o$).\n\n#### **The Miller Effect and Bandwidth**\nThe most critical advantage of this specific configuration (where $V_{G1} = V_{G2} = V_{in}$) is the **reduction of the Miller Effect**. \n*   In a standard common-source amplifier, the capacitance between the gate and drain of $M_1$ is amplified by the gain, which severely limits the high-frequency response (bandwidth).\n*   In this cascode, if the transconductances are matched ($g_{m1} \\approx g_{m2}$), the voltage at the node between $M_1$ and $M_2$ remains nearly constant for small changes in $V_{in}$.\n*   Since the drain of $M_1$ doesn't \"swing\" much, the Miller capacitance is minimized, significantly increasing the **bandwidth** of the amplifier.\n\n### Summary Table\n| Feature | Analysis |\n| :--- | :--- |\n| **Circuit Type** | NMOS Cascode Amplifier |\n| **Input Stage** | Common-Source ($M_1$) |\n| **Output Stage** | Common-Gate-like ($M_2$) |\n| **Voltage Gain** | $\\approx -g_{m1} R_D$ |\n| **Primary Benefit** | High bandwidth due to suppressed Miller Effect |\n| **Output Impedance** | Very high (dominated by $R_D$) |",
        "format": "markdown",
        "sha256": "3348db7ac0b306d90bf83e74176b21b09c383a2bce44091fa7da2c1457acc51d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the tied-gate series NMOS pair as a cascode and applies cascode gain, output-resistance, and Miller-effect reasoning. It misses the essential result: M1 operates in triode and the pair behaves approximately like one NMOS with effective channel length L1 + L2.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 297,
        "output_tokens": 5802,
        "total_tokens": 6099,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 297,
        "output_tokens": 5802,
        "total_tokens": 6099,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is an **NMOS Differential Amplifier** (also known as a differential pair) with a **single-ended output**. \n\nIt consists of two NMOS transistors ($M_1$ and $M_2$) sharing a common source node, which is connected to a constant current source $I_1$. This configuration is a fundamental building block in analog integrated circuits, often used as the input stage of operational amplifiers (op-amps).\n\n### 2. Component Analysis\n*   **$M_1$ and $M_2$:** These are the differential pair transistors. They \"steer\" the current from the tail source $I_1$ based on the input voltages.\n*   **$I_1$ (Tail Current Source):** This provides a constant total current to the pair. It ensures that the sum of the currents through $M_1$ and $M_2$ remains constant ($I_{D1} + I_{D2} = I_1$), regardless of the input voltage.\n*   **$V_{in}$:** The signal input voltage.\n*   **$V_b$:** A constant bias voltage applied to the gate of $M_2$. This sets the reference point for the differential operation.\n*   **$R_D$ (Drain Resistor):** This converts the varying drain current of $M_2$ into a varying output voltage $V_{out}$.\n*   **$V_{DD}$:** The positive supply voltage.\n\n### 3. Principle of Operation\nThe circuit operates by comparing the input voltage $V_{in}$ with the bias voltage $V_b$.\n\n*   **Quiescent State (Balanced):** If $V_{in} = V_b$, the transistors are balanced. Assuming $M_1$ and $M_2$ are identical, the current $I_1$ splits equally: $I_{D1} = I_{D2} = \\frac{I_1}{2}$. The output voltage is $V_{out} = V_{DD} - \\frac{I_1}{2} R_D$.\n*   **Input Increase:** If $V_{in}$ increases relative to $V_b$, $M_1$ becomes more conductive, and its drain current $I_{D1}$ increases. Because the total current $I_1$ is fixed, $M_2$ must conduct less current ($I_{D2}$ decreases). A decrease in $I_{D2}$ reduces the voltage drop across $R_D$, causing $V_{out}$ to **increase**.\n*   **Input Decrease:** Conversely, if $V_{in}$ decreases, $M_1$ conducts less, $M_2$ conducts more, and $V_{out}$ **decreases**.\n\n### 4. Small-Signal Analysis (Voltage Gain)\nThe voltage gain ($A_v$) is the ratio of the change in output voltage to the change in input voltage:\n$$A_v = \\frac{\\Delta V_{out}}{\\Delta V_{in}}$$\n\nFor a small change in $V_{in}$, the change in current in $M_1$ is $\\Delta I_{D1} = g_{m1} \\Delta V_{in}$ (where $g_{m1}$ is the transconductance of $M_1$). Since $I_1$ is constant, the change in $M_2$'s current is exactly opposite: $\\Delta I_{D2} = -g_{m1} \\Delta V_{in}$.\n\nThe change in output voltage is:\n$$\\Delta V_{out} = -\\Delta I_{D2} \\cdot R_D = -(-g_{m1} \\Delta V_{in}) \\cdot R_D = g_{m1} R_D \\Delta V_{in}$$\n\nHowever, in a standard differential pair analysis relative to the differential input $(V_{in} - V_b)$, the gain for a single-ended output is typically expressed as:\n$$A_v = \\frac{1}{2} g_m R_D$$\n*(The factor of $1/2$ appears because the input signal is effectively split between the two branches of the pair).*\n\n### Summary Table\n| Feature | Description |\n| :--- | :--- |\n| **Circuit Type** | NMOS Differential Pair (Single-ended output) |\n| **Input** | $V_{in}$ (compared against $V_b$) |\n| **Output** | $V_{out}$ (taken from drain of $M_2$) |\n| **Key Function** | Amplifies the difference between $V_{in}$ and $V_b$ |\n| **Gain** | Proportional to $g_m$ and $R_D$ |\n| **Main Advantage** | High Common-Mode Rejection Ratio (CMRR) |",
        "format": "markdown",
        "sha256": "c8deeeac2b4c153f33a8a65590aef1b3704c46dd52e71839dd23ce4eacbe0c65"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, with M2 biased by Vb and the output at its drain. It gives the correct non-inverting trend and final matched-device gain; the intermediate small-signal derivation is imprecise but does not change the conclusion.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 2704,
        "total_tokens": 2997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 2704,
        "total_tokens": 2997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is a **differential pair** (also known as a differential amplifier) configured to operate as a single-ended amplifier. \n\n*   **$M_1$ and $M_2$**: N-channel MOSFETs forming the differential pair.\n*   **$I_1$**: A constant current source that provides the \"tail current\" for the pair.\n*   **$R_D$**: A load resistor that converts the current change at the drain of $M_2$ into a voltage change.\n*   **$V_{in}$**: The input signal voltage.\n*   **$V_b$**: A constant bias voltage applied to the gate of $M_2$.\n*   **$V_{out}$**: The output voltage taken from the drain of $M_2$.\n\n### 2. Operating Principle\nIn a differential pair, the total current $I_1$ is shared between the two transistors:\n$$I_1 = I_{D1} + I_{D2}$$\n\nBecause $I_1$ is a constant current source, any change in the current flowing through $M_1$ must be exactly balanced by an opposite change in the current flowing through $M_2$.\n\n*   **When $V_{in}$ increases**: The gate-to-source voltage ($V_{GS1}$) of $M_1$ increases, causing $I_{D1}$ to increase.\n*   **Current Steering**: Since $I_1$ is constant, as $I_{D1}$ increases, $I_{D2}$ must decrease by the same amount ($\\Delta I_{D1} = -\\Delta I_{D2}$).\n*   **Output Voltage**: The output voltage is determined by the voltage drop across $R_D$:\n    $$V_{out} = V_{DD} - (I_{D2} \\cdot R_D)$$\n    As $I_{D2}$ decreases, the voltage drop across $R_D$ decreases, causing $V_{out}$ to **increase**.\n\n### 3. Small-Signal Analysis (Voltage Gain)\nTo find the voltage gain ($A_v = \\frac{\\Delta V_{out}}{\\Delta V_{in}}$), we look at the small-signal behavior:\n\n1.  **Input to Current**: A small change in $V_{in}$ creates a change in $I_{D1}$ based on the transconductance ($g_{m1}$) of $M_1$:\n    $$\\Delta I_{D1} \\approx g_{m1} \\cdot \\Delta V_{in}$$\n    *(Assuming the source node is effectively grounded for small signals due to the high impedance of the current source $I_1$)*.\n2.  **Current Steering**: As established, $\\Delta I_{D2} = -\\Delta I_{D1}$.\n3.  **Current to Voltage**: The change in output voltage is:\n    $$\\Delta V_{out} = -\\Delta I_{D2} \\cdot R_D = \\Delta I_{D1} \\cdot R_D$$\n4.  **Total Gain**: Substituting the first equation into the third:\n    $$\\Delta V_{out} = (g_{m1} \\cdot \\Delta V_{in}) \\cdot R_D$$\n    $$A_v = \\frac{\\Delta V_{out}}{\\Delta V_{in}} = g_{m1} R_D$$\n\n### 4. Summary of Characteristics\n| Feature | Analysis |\n| :--- | :--- |\n| **Circuit Type** | Differential-to-single-ended amplifier |\n| **Phase** | **Non-inverting** (An increase in $V_{in}$ leads to an increase in $V_{out}$) |\n| **Voltage Gain** | $A_v \\approx g_{m1} R_D$ |\n| **Key Advantage** | High common-mode rejection and stability provided by the tail current source $I_1$. |",
        "format": "markdown",
        "sha256": "d24feda03a197accd716bd6112c8aefc324a2e7eb23b6465171f87ae60305b41"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, including M2’s bias and the output location, and gets the non-inverting signal direction right. The gain is overstated because the shared source node is not AC-grounded, but the golden solution’s full-credit rule accepts this topology identification without requiring a gain expression.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 2122,
        "total_tokens": 2414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 2122,
        "total_tokens": 2414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided image, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit is a **differential pair (or differential amplifier) with a single-ended output**. \n\nIn a standard differential amplifier, you would have two identical loads at the drains of both transistors. In this specific configuration, the drain of $M_1$ is connected directly to the supply voltage $V_{DD}$, and only the drain of $M_2$ has a load resistor $R_D$. This means the circuit converts a differential input (the difference between $V_{in}$ and $V_b$) into a single-ended output voltage $V_{out}$.\n\n### 2. Component Analysis\n*   **$M_1$ and $M_2$**: NMOS transistors forming the differential pair.\n*   **$I_1$**: A constant current source (tail current) that forces the sum of the currents through $M_1$ and $M_2$ to remain constant.\n*   **$R_D$**: The load resistor that converts the current flowing through $M_2$ into an output voltage.\n*   **$V_{in}$**: The input signal voltage.\n*   **$V_b$**: A bias voltage that sets the reference point for the differential operation.\n*   **$V_{DD}$**: The positive power supply.\n\n### 3. Principle of Operation\nThe core mechanism of this circuit is **current steering**. The total current $I_1$ is split between the two transistors:\n$$I_1 = I_{D1} + I_{D2}$$\n\n*   **When $V_{in}$ increases** (relative to $V_b$): $M_1$ becomes more conductive, drawing more of the current $I_1$. Consequently, $I_{D2}$ must decrease to keep the total current $I_1$ constant.\n*   **When $V_{in}$ decreases** (relative to $V_b$): $M_1$ becomes less conductive, and more of the current $I_1$ is steered through $M_2$, increasing $I_{D2}$.\n\nThe output voltage is determined by the voltage drop across $R_D$:\n$$V_{out} = V_{DD} - (I_{D2} \\cdot R_D)$$\n\nBecause $V_{out}$ is inversely proportional to $I_{D2}$, and $I_{D2}$ is inversely proportional to $V_{in}$, the overall gain from $V_{in}$ to $V_{out}$ is **positive**.\n\n### 4. Small-Signal Analysis (Voltage Gain)\nTo find the voltage gain $A_v = \\frac{\\Delta V_{out}}{\\Delta V_{in}}$, we look at the small-signal changes:\n\n1.  A change in $V_{in}$ causes a change in the current of $M_1$: $\\Delta I_{D1} \\approx g_{m1} \\Delta V_{in}$ (ignoring source degeneration for simplicity).\n2.  Since $I_1$ is constant, $\\Delta I_{D2} = -\\Delta I_{D1}$.\n3.  The change in output voltage is $\\Delta V_{out} = -\\Delta I_{D2} \\cdot R_D = \\Delta I_{D1} \\cdot R_D$.\n4.  Therefore, the gain is approximately:\n    $$A_v \\approx g_{m1} R_D$$\n\n*(Note: If we account for the shift in the common source node voltage, the gain is more accurately $A_v = \\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} R_D$. If the transistors are identical, this simplifies to $A_v = \\frac{g_m}{2} R_D$.)*\n\n### Summary Table\n| Feature | Description |\n| :--- | :--- |\n| **Circuit Type** | Single-ended Differential Amplifier |\n| **Input** | $V_{in}$ (compared against reference $V_b$) |\n| **Output** | $V_{out}$ (taken from drain of $M_2$) |\n| **Gain Polarity** | Positive (Non-inverting) |\n| **Key Function** | Current steering based on input voltage |",
        "format": "markdown",
        "sha256": "13e4d7837e9be47ff068ae0ca96d58be2a550b803e06deacdf3daa04dcf28e6d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a single-ended source-coupled differential pair, with M2 biased by Vb and output taken at its drain. It gives the correct non-inverting gain and matched-device expression; the rough intermediate approximation is corrected.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 2422,
        "total_tokens": 2714,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1478,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 2422,
        "total_tokens": 2714,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1478,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of this circuit can be inductive due to the **negative capacitance** effect created by the feedback path from the output node to the gate of the PMOS transistor ($M_1$).\n\nHere is the step-by-step technical explanation:\n\n### 1. The Feedback Path\nTo find the output impedance ($Z_{out}$), we look into the $V_{out}$ node while the input $V_{in}$ is treated as an AC ground. \nThere is a parasitic gate-drain capacitance, $C_{gd1}$, connecting the output node $V_{out}$ to the gate of $M_1$. The gate of $M_1$ is connected to ground through the resistor $R_S$. This creates a voltage divider that couples the output voltage back to the gate of $M_1$.\n\n### 2. Effect on the PMOS Current\nThe current flowing through $M_1$ (from $V_{DD}$ to $V_{out}$) is governed by its transconductance $g_{m1}$:\n$$i_{M1} \\approx g_{m1} \\cdot v_{gs1}$$\nSince $M_1$ is a PMOS, $v_{gs1} = v_{source} - v_{gate} = V_{DD} - v_{g1}$. \n\nWhen the output voltage $V_{out}$ increases:\n1. A positive charge is coupled through $C_{gd1}$ to the gate of $M_1$, causing $v_{g1}$ to **increase**.\n2. As $v_{g1}$ increases, the gate-source voltage $v_{gs1}$ **decreases**.\n3. A decrease in $v_{gs1}$ causes the current $i_{M1}$ flowing into the output node to **decrease**.\n\n### 3. The \"Negative Capacitance\" Concept\nIn a standard capacitor, an increase in voltage results in an increase in current flowing *into* the capacitor (it absorbs current). \n\nIn this circuit, an increase in $V_{out}$ causes a **decrease** in the current $i_{M1}$ flowing into the output node. Mathematically, this is equivalent to a current flowing *out* of the node in response to a voltage increase. This behavior mimics a **negative capacitor**.\n\nThe total admittance $Y_{out}$ (the inverse of impedance) can be approximated as:\n$$Y_{out} \\approx G_{out} + s(C_{parasitic} - g_{m1} R_S C_{gd1})$$\nWhere:\n*   $G_{out}$ is the output conductance ($g_{ds1} + g_{ds2}$).\n*   $C_{parasitic}$ is the sum of the physical drain capacitances.\n*   The term $g_{m1} R_S C_{gd1}$ is the \"negative capacitance\" contributed by the feedback loop.\n\n### 4. Why it becomes Inductive\nIf the feedback effect is strong enough (i.e., $g_{m1} R_S C_{gd1} > C_{parasitic}$), the total effective capacitance $C_{eff}$ becomes **negative**.\n\nAn impedance with a negative capacitance in parallel with a conductance behaves like an inductor at certain frequencies. Specifically, the impedance $Z_{out}$ becomes:\n$$Z_{out} = \\frac{1}{G_{out} - s|C_{eff}|}$$\nUsing a Taylor expansion for low frequencies:\n$$Z_{out} \\approx \\frac{1}{G_{out}} \\left( 1 + \\frac{s|C_{eff}|}{G_{out}} \\right) = R_{out} + s \\left( \\frac{|C_{eff}|}{G_{out}^2} \\right)$$\nThe term $s L_{eff}$ (where $L_{eff} = \\frac{|C_{eff}|}{G_{out}^2}$) represents an **inductive impedance**.\n\n### Summary\nThe output impedance is inductive because the **$C_{gd1} \\to R_S$ feedback loop** creates a current response that opposes the change in output voltage, effectively acting as a negative capacitor. When this negative capacitance dominates the physical parasitic capacitances, the circuit exhibits the phase characteristics of an inductor.",
        "format": "markdown",
        "sha256": "9e3e5ad39e0c8b57ea06cae18f67c8e59a98d00adc3f386274bd60def1e2d6bd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The conclusion is right, but the explanation misidentifies the topology and the feedback path: M1 is a source follower, and its drain is at VDD, so Cgd does not connect the output to the gate. The inductive behavior comes from Cgs and Rs, with Zout rising from about 1/gm1 to Rs when Rs > 1/gm1.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 3281,
        "total_tokens": 3575,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 3281,
        "total_tokens": 3575,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To understand why the output impedance of the circuit can be inductive, we need to analyze the impedance looking into the output node $V_{\\text{out}}$ while setting the input $V_{\\text{in}}$ to an AC ground (which is the standard procedure for finding output impedance).\n\n### 1. Circuit Topology Analysis\nThe circuit consists of two MOSFETs:\n*   **$M_1$** is configured as a **Source Follower** (Common-Drain amplifier). Its drain is connected to $V_{DD}$, its gate to $V_{\\text{in}}$, and its source to the output node $V_{\\text{out}}$.\n*   **$M_2$** is configured as a **Current Source load**. Its gate is biased at a constant voltage $V_b$, and its source is grounded.\n\nThe total output impedance $Z_{\\text{out}}$ is the parallel combination of the impedance looking into the source of $M_1$ ($Z_{S1}$) and the impedance looking into the drain of $M_2$ ($Z_{D2}$):\n$$Z_{\\text{out}} = Z_{S1} \\parallel Z_{D2}$$\n\n### 2. Analyzing $Z_{D2}$ (The Load)\nLooking into the drain of $M_2$, the impedance is approximately the output resistance of the MOSFET, $r_{o2}$, in parallel with the drain-bulk capacitance $C_{db2}$. This is a very high, primarily capacitive impedance.\n\n### 3. Analyzing $Z_{S1}$ (The Source Follower)\nWhen we find $Z_{\\text{out}}$, we set $V_{\\text{in}} = 0$. With the gate of $M_1$ grounded, $M_1$ effectively becomes a **Common-Gate (CG) stage** from the perspective of the output node.\n\nThe current $i_{S1}$ entering the source of $M_1$ is the sum of the transconductance current and the displacement current through the gate-source capacitance $C_{gs1}$:\n$$i_{S1} = g_{m1} v_{gs1} + s C_{gs1} v_{gs1}$$\n\nSince the gate is grounded ($v_{g1} = 0$), the gate-source voltage is $v_{gs1} = v_{g1} - v_{\\text{out}} = -v_{\\text{out}}$. Substituting this into the current equation:\n$$i_{S1} = -g_{m1} v_{\\text{out}} - s C_{gs1} v_{\\text{out}}$$\n\nThe admittance $Y_{S1}$ looking into the source is:\n$$Y_{S1} = \\frac{i_{S1}}{v_{\\text{out}}} = -g_{m1} - s C_{gs1}$$\n\n### 4. Why it is Inductive\nThe impedance $Z_{S1}$ is the reciprocal of the admittance:\n$$Z_{S1} = \\frac{1}{-g_{m1} - s C_{gs1}}$$\n\nTo see the inductive behavior, we can multiply the numerator and denominator by the conjugate (or simply expand the fraction):\n$$Z_{S1} = \\frac{-g_{m1} + s C_{gs1}}{(-g_{m1})^2 - (s C_{gs1})^2} = \\frac{-g_{m1} + s C_{gs1}}{g_{m1}^2 - \\omega^2 C_{gs1}^2}$$\n\nNow, consider the frequency $\\omega$:\n*   **At low frequencies** ($\\omega^2 C_{gs1}^2 < g_{m1}^2$), the denominator is positive. The imaginary part is positive, but the real part is negative.\n*   **At high frequencies** ($\\omega^2 C_{gs1}^2 > g_{m1}^2$), the denominator becomes **negative**. \n    *   The imaginary part becomes $\\frac{s C_{gs1}}{\\text{negative value}}$, which results in a **positive imaginary component** for the impedance $Z$ (since $s = j\\omega$).\n    *   A positive imaginary part in impedance ($Z = R + j\\omega L$) corresponds to an **inductive** behavior.\n\n### Conclusion\nThe output impedance can be inductive because the source-follower $M_1$ acts as a Common-Gate stage when the input is grounded. The interaction between the negative conductance (created by the $g_m$ feedback) and the gate-source capacitance $C_{gs1}$ creates a pole in the right-half plane, causing the impedance to behave like an inductor at frequencies above the critical point $\\omega > \\frac{g_{m1}}{C_{gs1}}$.",
        "format": "markdown",
        "sha256": "460be0bbc84e8f8fd695986c9eeac9fdf41de0fad19ffa22520a7f42551e5767"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M1 as a source follower and notes Cgs, but incorrectly treats the gate as hard-grounded, omitting the series resistor that creates the inductive behavior. Its negative-admittance/RHP-pole explanation and frequency condition are wrong; the actual impedance rises from about 1/gm1 to RS and is inductive when RS > 1/gm1.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 13347,
        "total_tokens": 13642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12329,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 13347,
        "total_tokens": 13642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12329,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the circuit shown can appear **inductive** at high frequencies due to the interaction between the parasitic gate-drain capacitance of the PMOS transistor ($M_1$) and the input resistance ($R_S$), which creates a **positive feedback loop** that can manifest as \"negative capacitance.\"\n\nHere is the step-by-step technical explanation:\n\n### 1. The Feedback Path\nIn a standard analysis of output impedance ($Z_{out}$), the input $V_{in}$ is treated as an AC ground. In this state, the gate of $M_1$ is connected to ground through the resistor $R_S$. However, there is a parasitic capacitance, $C_{gd1}$, connecting the output node ($V_{out}$) to the gate of $M_1$. This creates a feedback path:\n$$\\text{Output } (V_{out}) \\rightarrow C_{gd1} \\rightarrow \\text{Gate of } M_1 \\rightarrow \\text{Drain of } M_1 \\rightarrow \\text{Output } (V_{out})$$\n\n### 2. Phase and Positive Feedback\nLet's trace the effect of a small increase in the output voltage $V_{out}$:\n*   **Capacitive Coupling:** An increase in $V_{out}$ pushes current through $C_{gd1}$, causing the voltage at the gate of $M_1$ ($V_{gate}$) to increase.\n*   **PMOS Behavior:** For a PMOS transistor, the drain current $I_{D1}$ is inversely proportional to the gate voltage (as $V_{gate}$ becomes less negative/more positive, the transistor conducts less). Therefore, an increase in $V_{gate}$ causes $I_{D1}$ to **decrease**.\n*   **Effect on Output:** Since $I_{D1}$ is the current flowing *into* the output node from $V_{DD}$, a decrease in $I_{D1}$ means less current is pulling the output node \"up\" (or, from the perspective of the output node, the current *leaving* the node increases).\n*   **Result:** $V_{out} \\uparrow \\implies V_{gate} \\uparrow \\implies I_{D1} \\downarrow \\implies V_{out} \\uparrow$. This is a **positive feedback loop**.\n\n### 3. The \"Negative Capacitance\" Effect\nThe current generated by this feedback loop is proportional to the rate of change of the voltage ($\\frac{dV_{out}}{dt}$), which is the characteristic of a capacitor. However, because of the positive feedback and the specific phase shift introduced by $R_S$ and $C_{gd1}$, this feedback current acts as a **negative capacitor** ($C_{neg}$) in parallel with the actual parasitic output capacitance ($C_{out}$).\n\nThe total output admittance $Y_{out}$ can be approximated as:\n$$Y_{out} \\approx \\frac{1}{R_{out,DC}} + s(C_{out} - C_{feedback})$$\nwhere $C_{feedback}$ is the effective capacitance created by the $g_{m1} C_{gd1} R_S$ loop.\n\n### 4. Why it becomes Inductive\nIf the feedback is strong enough such that $C_{feedback} > C_{out}$, the effective capacitance becomes **negative**. \n\nAn impedance with a negative capacitance in parallel with a resistor behaves like an inductor. Mathematically, if the imaginary part of the admittance $Y_{out}$ is negative ($\\text{Im}(Y_{out}) < 0$), the imaginary part of the impedance $Z_{out} = 1/Y_{out}$ becomes **positive**:\n$$\\text{Im}(Z_{out}) > 0 \\implies \\text{Inductive Behavior}$$\n\nIn summary, the circuit can be inductive because the **positive feedback loop** created by $C_{gd1}$ and $R_S$ cancels out the natural parasitic capacitance of the output node and, if dominant, pushes the phase of the output impedance into the inductive region.",
        "format": "markdown",
        "sha256": "42bff36cc159ff8201022ee47d8837490ec244eb753d6b40c7d1f5867e8b7434"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer relies on a nonexistent output-to-gate Cgd feedback path. The relevant mechanism is Cgs making Zout transition from about 1/gm at low frequency to RS at high frequency, rising inductively when RS > 1/gm.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 16039,
        "total_tokens": 16334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 16039,
        "total_tokens": 16334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its structure and operation.\n\n### 1. Circuit Identification\nThe circuit is a **common-source amplifier** configuration where two n-channel MOSFETs ($M_1$ and $M_2$) are connected in **parallel**. The input is provided by a current source $I_{in}$, and the output is taken as a voltage $V_{out}$.\n\n### 2. Component Analysis\n*   **NMOS Transistors ($M_1, M_2$):** Both transistors have their sources connected to ground and their gates tied together at node $X$. Their drains are both connected to the output node $V_{out}$. Because they share the same gate-to-source voltage ($V_{GS} = V_X$), they act as a single combined current sink.\n*   **Load Resistor ($R_{D1}$):** This resistor is connected between the supply voltage $V_{DD}$ and the output node. It converts the total current flowing through the transistors into an output voltage.\n*   **Input Current Source ($I_{in}$):** This source injects current into node $X$. In a real MOSFET, the gate is an insulator, meaning this current will charge the parasitic gate capacitances ($C_{gs1}$ and $C_{gs2}$).\n*   **Supply Voltage ($V_{DD}$):** Provides the DC power for the circuit.\n\n### 3. Operational Analysis\nThe operation of the circuit can be broken down into the following steps:\n\n1.  **Gate Voltage Generation:** The input current $I_{in}$ charges the total gate capacitance $C_g = C_{gs1} + C_{gs2}$. This causes the voltage at node $X$ ($V_X$) to increase over time.\n2.  **Transistor Conduction:** As $V_X$ rises above the threshold voltage ($V_{th}$), both $M_1$ and $M_2$ turn on. They begin to conduct current from the output node $V_{out}$ to ground.\n3.  **Total Drain Current:** Since the transistors are in parallel, the total current sinking from $V_{out}$ is the sum of the individual drain currents:\n    $$I_{total} = I_{D1} + I_{D2}$$\n    Assuming both are in the saturation region:\n    $$I_{total} = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W_1}{L_1} + \\frac{W_2}{L_2} \\right) (V_X - V_{th})^2$$\n4.  **Output Voltage Determination:** According to Kirchhoff's Current Law (KCL) at the $V_{out}$ node, the current supplied by $R_{D1}$ must equal the current sunk by the transistors:\n    $$\\frac{V_{DD} - V_{out}}{R_{D1}} = I_{total} \\implies V_{out} = V_{DD} - (I_{D1} + I_{D2}) R_{D1}$$\n\n### 4. Summary of Behavior\n*   **Current-to-Voltage Conversion:** The circuit converts an input current $I_{in}$ into an output voltage $V_{out}$.\n*   **Integration Effect:** Because the input current charges a capacitor (the gate), the circuit behaves as an **integrator**. A constant $I_{in}$ will cause $V_X$ to ramp up linearly, which in turn causes $V_{out}$ to decrease over time.\n*   **Increased Transconductance:** By placing $M_1$ and $M_2$ in parallel, the circuit increases the total transconductance ($G_m = g_{m1} + g_{m2}$), making the output voltage more sensitive to changes in the gate voltage $V_X$ compared to a single-transistor design.\n\n**Conclusion:** This circuit is essentially a **current-input common-source amplifier** that acts as a voltage integrator, where the parallel MOSFETs serve to increase the overall gain/sensitivity of the system.",
        "format": "markdown",
        "sha256": "cc3adba2688c754b870d45a9e0e210be9ec71ac4d790f53a65fd796a66e93ff3"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly recognizes M1 as a common-source stage driven at X by an input current, but incorrectly puts M2 in parallel with M1 and misses the positive-feedback loop and its instability or latching consequence. The claimed integrator behavior is also not the circuit’s key operation.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 594,
        "output_tokens": 23259,
        "total_tokens": 23853,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 297,
        "output_tokens": 6875,
        "total_tokens": 7172,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5993,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its structure and operation.\n\n### 1. Circuit Components and Topology\nThe circuit consists of the following key elements:\n*   **Transistors $M_1$ and $M_2$**: Both are NMOS transistors. They are connected in **parallel**, meaning they share the same gate voltage ($V_X$), the same source voltage (ground), and the same drain voltage ($V_{out}$).\n*   **Input Current Source $I_{in}$**: This source injects current into node $X$, which is connected to the gates of both transistors.\n*   **Load Resistor $R_{D1}$**: This resistor is connected between the supply voltage $V_{DD}$ and the output node $V_{out}$.\n*   **Output $V_{out}$**: The voltage at the common drain of $M_1$ and $M_2$.\n\n### 2. Functional Analysis\nTo understand how the circuit behaves, we can look at it from a DC and dynamic perspective:\n\n#### A. Gate Voltage Dynamics (Integration)\nIn a MOSFET, the gate is ideally insulated. Therefore, the input current $I_{in}$ cannot flow through the transistors. Instead, it charges the total gate capacitance $C_g$ (the sum of the gate capacitances of $M_1$ and $M_2$).\nThe voltage at node $X$ ($V_X$) will change over time according to the integral of the input current:\n$$V_X(t) = \\frac{1}{C_g} \\int I_{in}(t) \\, dt$$\nThis makes node $X$ act as an **integrator** of the input current.\n\n#### B. Current Sinking\nTransistors $M_1$ and $M_2$ act as current sinks. Because they are in parallel, their total drain current ($I_{D,total}$) is the sum of their individual currents:\n$$I_{D,total} = I_{D1} + I_{D2}$$\nAssuming the transistors are operating in the saturation region, the total current is:\n$$I_{D,total} = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W_1}{L_1} + \\frac{W_2}{L_2} \\right) (V_X - V_{th})^2$$\nwhere $V_{th}$ is the threshold voltage. As $V_X$ increases (due to $I_{in}$), the total current $I_{D,total}$ also increases.\n\n#### C. Output Voltage Generation\nThe output voltage $V_{out}$ is determined by the voltage drop across the load resistor $R_{D1}$:\n$$V_{out} = V_{DD} - I_{D,total} \\cdot R_{D1}$$\nAs the input current $I_{in}$ increases $V_X$, the transistors draw more current from the supply, causing $V_{out}$ to decrease.\n\n### 3. Summary and Conclusion\nThis circuit is a **current-to-voltage integrator**. \n\n*   **Input**: A current $I_{in}$.\n*   **Process**: The current is integrated by the gate capacitances to create a control voltage $V_X$. This voltage controls the total current flowing through the load resistor.\n*   **Output**: A voltage $V_{out}$ that is inversely related to the integrated value of the input current.\n\n**Key Application:** Such a configuration is often used in analog signal processing, such as in current-mode integrators or as a building block for certain types of voltage-controlled current sources (VCCS) with integrated memory.",
        "format": "markdown",
        "sha256": "200a6fe10e3148ad9811edeb603d6b63ccf4194874baa56ed32d3fea09546d4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly recognizes the input current at X and M1’s common-source path through RD1, but misreads M2 as parallel with M1 and misses the positive-feedback loop. Its integrator conclusion is therefore wrong.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 10208,
        "total_tokens": 10504,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9414,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 10208,
        "total_tokens": 10504,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9414,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, this is a **current-to-voltage converter** (also known as a transimpedance amplifier) that utilizes an NMOS current mirror.\n\n### 1. Circuit Identification and Components\nThe circuit consists of the following key elements:\n*   **$I_{in}$**: An input current source that provides the signal to be converted.\n*   **$M_2$**: The input transistor of a current mirror. In this topology, it is intended to be **diode-connected** (meaning its gate and drain are tied together) to convert the input current $I_{in}$ into a voltage $V_X$.\n*   **$M_1$**: The mirror transistor. It shares the same gate-source voltage ($V_{GS}$) as $M_2$, allowing it to \"mirror\" the current flowing through $M_2$.\n*   **$R_{D1}$**: A load resistor that converts the mirrored current into an output voltage $V_{out}$.\n*   **$V_{DD}$**: The positive DC supply voltage.\n\n### 2. Circuit Analysis\nAssuming the transistors are operating in the saturation region, we can analyze the circuit as follows:\n\n**Step 1: Current at the input stage ($M_2$)**\nThe input current $I_{in}$ flows through $M_2$ to ground. This current sets the gate-source voltage $V_{GS}$ for both transistors:\n$$I_{D2} = I_{in}$$\nThe voltage at node $X$ is determined by the square-law equation for $M_2$:\n$$V_X = V_{GS} = V_{th} + \\sqrt{\\frac{2 I_{in}}{\\mu_n C_{ox} (W/L)_2}}$$\n\n**Step 2: Current mirroring ($M_1$)**\nSince $M_1$ and $M_2$ share the same $V_{GS}$, $M_1$ will conduct a current proportional to $I_{in}$ based on the ratio of their aspect ratios $(W/L)$:\n$$I_{D1} = I_{in} \\cdot \\frac{(W/L)_1}{(W/L)_2}$$\n\n**Step 3: Output voltage calculation**\nThe current $I_{D1}$ flows through the resistor $R_{D1}$, creating a voltage drop. The output voltage $V_{out}$ is:\n$$V_{out} = V_{DD} - I_{D1} \\cdot R_{D1}$$\nSubstituting the expression for $I_{D1}$:\n$$V_{out} = V_{DD} - I_{in} \\cdot \\left( \\frac{(W/L)_1}{(W/L)_2} \\cdot R_{D1} \\right)$$\n\n### 3. Summary of Operation\nThe circuit converts the input current $I_{in}$ into a linear output voltage $V_{out}$. The **transimpedance gain** (the change in $V_{out}$ per change in $I_{in}$) is given by:\n$$\\text{Gain} = \\frac{\\Delta V_{out}}{\\Delta I_{in}} = -\\frac{(W/L)_1}{(W/L)_2} \\cdot R_{D1}$$\n\n### Note on Diagram Ambiguity\nAs drawn, there is a line connecting $V_{out}$ to the drain of $M_2$. In a standard ideal MOSFET model, the gate is an insulator; if $I_{in}$ is connected only to the gate (node $X$), there would be no DC path to ground, making the circuit unstable. \n\nIn practical textbook versions of this circuit, **$M_2$ is diode-connected**, meaning node $X$ is connected to both the gate and the drain of $M_2$. The line from $V_{out}$ to $M_2$ in the drawing is likely a misplacement or represents a specific feedback configuration, but the primary intended function is the current-mirror conversion described above.",
        "format": "markdown",
        "sha256": "b6d07260e0f7be44e930f693ffcdacdfa6bd13dd11ba04e3b5e5310472c4811a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer invents a current-mirror topology, treats M2 as diode-connected, and misses the positive-feedback loop. It also misidentifies M1 as a mirror transistor rather than a common-source stage.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 11908,
        "total_tokens": 12204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11045,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 11908,
        "total_tokens": 12204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11045,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its operation and characteristics.\n\n### 1. Circuit Identification\nThis circuit is a **Transimpedance Amplifier (TIA)**, also known as a current-to-voltage converter. It consists of a two-stage amplifier with a shunt-feedback resistor ($R_F$).\n\n*   **Input:** A current source $I_{in}$.\n*   **First Stage ($M_1$):** An NMOS transistor acting as a common-source amplifier. It is biased by a voltage $V_b$ at its gate.\n*   **Second Stage ($M_2$):** Another NMOS transistor acting as a common-source amplifier, driven by the voltage at node $X$.\n*   **Feedback Loop:** The resistor $R_F$ connects the output $V_{out}$ back to the source of $M_1$.\n\n---\n\n### 2. Qualitative Analysis (Signal Flow)\nThe circuit converts an input current into an output voltage through the following path:\n1.  **Input Stage:** The input current $I_{in}$ flows into the source of $M_1$.\n2.  **Voltage Conversion 1:** $M_1$ converts the current into a voltage at node $X$. Because $M_1$ is a common-source stage, an increase in current through $M_1$ pulls node $X$ lower (towards ground) due to the load resistor $R_{D1}$.\n3.  **Voltage Conversion 2:** Node $X$ serves as the gate input for $M_2$. A lower voltage at $X$ reduces the gate-source voltage ($V_{GS2}$) of $M_2$, which decreases the drain current $I_{D2}$.\n4.  **Output Stage:** As $I_{D2}$ decreases, the voltage drop across $R_{D2}$ decreases, causing the output voltage $V_{out}$ to rise.\n\n---\n\n### 3. Feedback Mechanism\nThe resistor $R_F$ implements **negative feedback**. Here is how the loop stabilizes the circuit:\n*   If $V_{out}$ increases, the current $i_{RF}$ flowing through $R_F$ (from $V_{out}$ toward the source of $M_1$) increases.\n*   This increase in current raises the voltage at the source of $M_1$ ($V_{S1}$).\n*   Since the gate voltage $V_b$ is constant, an increase in $V_{S1}$ **decreases** the gate-source voltage $V_{GS1} = V_b - V_{S1}$.\n*   A lower $V_{GS1}$ reduces the current $I_{D1}$ flowing through $M_1$.\n*   A reduction in $I_{D1}$ causes the voltage at node $X$ to **increase** (less voltage drop across $R_{D1}$).\n*   An increase in $V_X$ increases the current $I_{D2}$ through $M_2$.\n*   An increase in $I_{D2}$ pulls $V_{out}$ **downward**, opposing the original increase.\n\n**Conclusion:** The feedback loop resists changes in $V_{out}$, which stabilizes the gain and reduces the input impedance of the amplifier.\n\n---\n\n### 4. Key Performance Characteristics\n*   **Transimpedance Gain ($Z_T$):** The overall gain is defined as $Z_T = \\frac{V_{out}}{I_{in}}$. In a high-gain TIA with strong negative feedback, the gain is approximately determined by the feedback resistor:\n    $$Z_T \\approx -R_F$$\n    (The negative sign indicates that an increase in input current leads to a decrease in output voltage).\n*   **Input Impedance:** The feedback significantly lowers the input impedance, which is critical for high-speed applications (like optical receivers) to prevent the input capacitance from creating a slow pole.\n*   **Bandwidth:** Negative feedback typically increases the bandwidth of the amplifier compared to an open-loop configuration.\n\n### Summary Table\n| Component | Function | Effect on Signal |\n| :--- | :--- | :--- |\n| **$M_1$** | Input Transconductance | Converts $I_{in}$ to $V_X$ |\n| **$M_2$** | Output Gain Stage | Converts $V_X$ to $V_{out}$ |\n| **$R_{D1}, R_{D2}$** | Load Resistors | Convert drain currents to voltages |\n| **$R_F$** | Feedback Resistor | Stabilizes gain and lowers input impedance |",
        "format": "markdown",
        "sha256": "b36be2dd6c0ea730e8fe21246ec458fd04643d7a90890982f385225e6385c1dc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer correctly identifies the TIA, the feedback connection, negative-feedback action, and M2 as a common-source stage. However, it misidentifies M1 as common-source rather than common-gate, and its input-signal explanation incorrectly says increased input current increases M1 current. The golden solution caps answers that misread M1 at 2.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 282,
        "output_tokens": 10422,
        "total_tokens": 10704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 282,
        "output_tokens": 10422,
        "total_tokens": 10704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its structure, operation, and behavior.\n\n### 1. Circuit Overview\nThe circuit is a **two-stage NMOS amplifier** configured as a **transimpedance amplifier** (converting an input current $I_{in}$ to an output voltage $V_{out}$) with a feedback loop provided by the resistor $R_F$.\n\n#### Key Components:\n*   **Input:** A current source $I_{in}$.\n*   **First Stage ($M_1$):** An NMOS transistor acting as a current-to-voltage converter. Its drain is connected to a load resistor $R_{D1}$.\n*   **Second Stage ($M_2$):** An NMOS transistor configured as a common-source amplifier. Its gate is driven by the output of the first stage (Node $X$), and its drain is connected to a load resistor $R_{D2}$.\n*   **Feedback Path:** A resistor $R_F$ connects the output node $V_{out}$ back to the source of $M_1$.\n*   **Biasing:** $V_{DD}$ is the supply voltage, and $V_b$ is a bias voltage used to set the operating point of $M_1$.\n\n---\n\n### 2. Step-by-Step Operation\nTo understand how the circuit works, let's trace the signal path from input to output:\n\n1.  **Input Stage:** The input current $I_{in}$ flows into the source of $M_1$. This current (along with any feedback current $i_{RF}$) flows through $M_1$ and then through the resistor $R_{D1}$ to $V_{DD}$.\n2.  **Voltage Conversion (Node $X$):** The voltage at node $X$ is determined by the current flowing through $R_{D1}$. As the current through $M_1$ increases, the voltage $V_X$ drops:\n    $$V_X \\approx V_{DD} - (I_{in} + i_{RF}) R_{D1}$$\n3.  **Second Stage Amplification:** $V_X$ acts as the gate voltage for $M_2$. Since $M_2$ is a common-source amplifier, a **decrease** in $V_X$ leads to a **decrease** in the drain current of $M_2$.\n4.  **Output Generation:** A decrease in $M_2$'s drain current causes the voltage at $V_{out}$ to **increase** (because less current is dropping across $R_{D2}$):\n    $$V_{out} = V_{DD} - I_{D2} R_{D2}$$\n\n---\n\n### 3. Feedback Analysis\nThe resistor $R_F$ creates a feedback loop. Let's analyze the polarity of this feedback:\n*   If $I_{in}$ increases $\\rightarrow$ $V_X$ decreases $\\rightarrow$ $V_{out}$ increases.\n*   As $V_{out}$ increases, the current $i_{RF}$ flowing through $R_F$ (from $V_{out}$ toward the source of $M_1$) also increases.\n*   This additional current $i_{RF}$ adds to $I_{in}$, further decreasing $V_X$, which in turn further increases $V_{out}$.\n\nBecause an increase in the output leads to a further increase in the output, this circuit employs **positive feedback**.\n\n---\n\n### 4. Mathematical Analysis (Small-Signal)\nIf we assume the transistors are in the saturation region and let $g_{m1}$ and $g_{m2}$ be their transconductances:\n\n*   **Open-Loop Gain (Transimpedance):** Without $R_F$, the gain $Z_T$ is:\n    $$V_{out} \\approx (g_{m2} R_{D2}) \\cdot (R_{D1} I_{in}) = g_{m2} R_{D1} R_{D2} I_{in}$$\n*   **Closed-Loop Gain:** With the positive feedback $R_F$, the output voltage is amplified by the feedback factor $\\beta \\approx 1/R_F$:\n    $$V_{out} = \\frac{g_{m2} R_{D1} R_{D2}}{1 - \\frac{g_{m2} R_{D1} R_{D2}}{R_F}} I_{in}$$\n\n### 5. Summary and Conclusion\n*   **Function:** The circuit converts an input current to a voltage.\n*   **Stability:** Due to the **positive feedback**, this circuit is potentially unstable. Depending on the values of the resistors and transconductances, it could act as a **Schmitt trigger** (providing hysteresis) or an **oscillator** if parasitic capacitances are present.\n*   **Application:** Such configurations are often used in high-speed comparators or latching circuits where a \"snap\" action (rapid transition between states) is desired.",
        "format": "markdown",
        "sha256": "bb930e0e09ce181da45c21b4817dacd64cf422275eadea4b8da77f8b7507a709"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate input connection, the common-source second stage, and the feedback path, but reverses the feedback polarity: this is negative, not positive, feedback. The resulting instability and latch/oscillator conclusions are therefore incorrect.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 282,
        "output_tokens": 4196,
        "total_tokens": 4478,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3114,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 282,
        "output_tokens": 4196,
        "total_tokens": 4478,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3114,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its structure and operation.\n\n### 1. Circuit Topology and Identification\nThe circuit is a **Transimpedance Amplifier (TIA)**, also known as a current-to-voltage converter. Its primary purpose is to convert an input current ($I_{in}$) into a proportional output voltage ($V_{out}$).\n\n**Key Components:**\n*   **$M_1$ and $M_2$**: NMOS transistors. $M_1$ acts as the input stage (configured similarly to a source follower), and $M_2$ acts as a common-source amplifier.\n*   **$R_{D1}$ and $R_{D2}$**: Drain load resistors that convert the currents of $M_1$ and $M_2$ into voltages.\n*   **$R_F$**: A feedback resistor that connects the output node ($V_{out}$) back to the input node (the source of $M_1$).\n*   **$V_b$**: A bias voltage used to set the operating point of $M_1$.\n*   **$V_{DD}$**: The positive supply voltage.\n\n---\n\n### 2. Operational Analysis\nTo understand how the circuit works, we can trace the signal path from the input to the output:\n\n1.  **Input Stage**: The input current $I_{in}$ and the feedback current $i_{RF}$ both flow into the source of $M_1$. The total current through $M_1$ is $I_{D1} = I_{in} + i_{RF}$.\n2.  **Voltage Conversion at Node X**: This current $I_{D1}$ flows through the load resistor $R_{D1}$, creating a voltage at node $X$:\n    $$V_X = V_{DD} - I_{D1} \\cdot R_{D1}$$\n    An increase in $I_{in}$ causes $V_X$ to decrease.\n3.  **Amplification Stage**: $M_2$ is a common-source amplifier. Its gate is connected to node $X$. Since $M_2$ is an NMOS, a decrease in $V_X$ reduces the current $I_{D2}$ flowing through $M_2$.\n4.  **Output Generation**: The output voltage $V_{out}$ is determined by the current $I_{D2}$ and the load resistor $R_{D2}$:\n    $$V_{out} = V_{DD} - I_{D2} \\cdot R_{D2}$$\n    Because $I_{D2}$ decreased, $V_{out}$ increases. Thus, an increase in $I_{in}$ leads to an increase in $V_{out}$.\n\n---\n\n### 3. Feedback Analysis\nThe resistor $R_F$ creates a feedback loop. Let's examine the nature of this feedback:\n*   An increase in $I_{in} \\rightarrow$ increase in $I_{D1} \\rightarrow$ decrease in $V_X \\rightarrow$ decrease in $I_{D2} \\rightarrow$ **increase in $V_{out}$**.\n*   An increase in $V_{out}$ increases the current $i_{RF}$ flowing through $R_F$ toward the source of $M_1$.\n*   This increase in $i_{RF}$ further increases $I_{D1}$, which further increases $V_{out}$.\n\nBecause the feedback reinforces the original change, this is **positive feedback**. In most standard TIAs, negative feedback is used for stability; positive feedback here suggests this circuit might be used as a high-gain regenerative stage, a Schmitt trigger, or part of an oscillator, depending on the bias conditions.\n\n---\n\n### 4. Small-Signal Mathematical Model\nIf we define $g_{m1}$ and $g_{m2}$ as the transconductances of the transistors, the small-signal transimpedance gain ($Z_T = v_{out} / i_{in}$) can be approximated as:\n\n$$v_{out} \\approx g_{m2} R_{D1} R_{D2} (i_{in} + i_{RF})$$\n$$i_{RF} = \\frac{v_{out} - v_s}{R_F} \\approx \\frac{v_{out}}{R_F} \\text{ (assuming } v_s \\text{ is small)}$$\n\nSubstituting $i_{RF}$ into the output equation:\n$$v_{out} \\approx g_{m2} R_{D1} R_{D2} \\left( i_{in} + \\frac{v_{out}}{R_F} \\right)$$\n$$v_{out} \\left( 1 - \\frac{g_{m2} R_{D1} R_{D2}}{R_F} \\right) \\approx g_{m2} R_{D1} R_{D2} \\cdot i_{in}$$\n\nThe transimpedance gain is:\n$$Z_T = \\frac{v_{out}}{i_{in}} \\approx \\frac{g_{m2} R_{D1} R_{D2}}{1 - \\frac{g_{m2} R_{D1} R_{D2}}{R_F}}$$\n\n### Summary Table\n| Feature | Description |\n| :--- | :--- |\n| **Circuit Type** | Transimpedance Amplifier (Current-to-Voltage) |\n| **Input** | Current $I_{in}$ |\n| **Output** | Voltage $V_{out}$ |\n| **Feedback Type** | Positive Feedback |\n| **Key Gain Factor** | Proportional to $g_{m2} R_{D1} R_{D2}$ |",
        "format": "markdown",
        "sha256": "079ce9c01608c89464ad502d5c0ba8f53a91c8637c955d38b573e337cd8cedc0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes a current-to-voltage amplifier, identifies M2 as common-source driven by X, and places RF from the output to M1's source. But it misclassifies M1 as a source follower and reverses the circuit's feedback sign: the loop is negative, not positive, so its operating explanation and gain model are wrong.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 282,
        "output_tokens": 8796,
        "total_tokens": 9078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 282,
        "output_tokens": 8796,
        "total_tokens": 9078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its operation and function.\n\n### 1. Circuit Identification\nThis circuit is a **current-to-voltage converter** (also known as a transimpedance amplifier). It takes an input current $I_{in}$ and converts it into an output voltage $V_{out}$.\n\n### 2. Component Analysis\n*   **$M_1$ (NMOS Transistor):** Its gate is connected to a fixed bias voltage $V_b$. It acts as a control element to stabilize the voltage at the input node.\n*   **$M_2$ (PMOS Transistor):** Its source is connected to $V_{DD}$ and its gate is connected to the output node $V_{out}$. It acts as the primary converting element.\n*   **$I_1$ (Current Source):** A constant current source that biases the output node.\n*   **$I_{in}$ and the adjacent current source:** These represent the input current signal. The net current entering the input node is $I_{net} = I_{in} - I_{bias}$ (where $I_{bias}$ is the downward current source).\n\n### 3. Step-by-Step Operation\n\n#### A. The Input Node (Virtual Constant Voltage)\nLet's look at the node where $I_{in}$ is connected. \n*   The current source $I_1$ flows into the output node $V_{out}$. Since the only path for this current to reach ground is through $M_1$, the drain current of $M_1$ is forced to be approximately equal to $I_1$:\n    $$I_{D1} \\approx I_1$$\n*   Because $V_b$ is a constant bias voltage and $I_{D1}$ is fixed by $I_1$, the gate-to-source voltage $V_{GS1}$ must remain constant (assuming $M_1$ is in saturation).\n*   Therefore, the voltage at the input node ($V_{in\\_node}$) is held constant:\n    $$V_{in\\_node} = V_b - V_{GS1}(I_1) \\approx \\text{constant}$$\n    This makes the input node act as a \"virtual ground\" or a fixed-voltage reference.\n\n#### B. Current Flow through $M_2$\nApplying Kirchhoff's Current Law (KCL) at the input node:\n$$\\text{Current In} = \\text{Current Out}$$\n$$I_{in} - I_{bias} + I_{D1} = I_{D2}$$\nSubstituting $I_{D1} \\approx I_1$:\n$$I_{D2} = I_{in} - I_{bias} + I_1$$\nThis shows that any change in the input current $I_{in}$ is directly reflected as a change in the current flowing through the PMOS transistor $M_2$.\n\n#### C. Generation of $V_{out}$\nThe PMOS transistor $M_2$ converts the current $I_{D2}$ into a voltage. For a PMOS in saturation, the current is given by:\n$$I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_{SG2} - |V_{thp}|)^2$$\nWhere $V_{SG2} = V_{DD} - V_{out}$. Solving for $V_{out}$:\n$$V_{out} = V_{DD} - |V_{thp}| - \\sqrt{\\frac{2 I_{D2}}{\\mu_p C_{ox} (W/L)_2}}$$\nSubstituting the expression for $I_{D2}$:\n$$V_{out} = V_{DD} - |V_{thp}| - \\sqrt{\\frac{2 (I_{in} - I_{bias} + I_1)}{\\mu_p C_{ox} (W/L)_2}}$$\n\n### 4. Summary of Findings\n*   **Function:** The circuit converts an input current $I_{in}$ into an output voltage $V_{out}$.\n*   **Transfer Characteristic:** The relationship is **non-linear**; the output voltage varies with the square root of the input current.\n*   **Role of $M_1$ and $I_1$:** They serve to \"clamp\" the input node to a constant voltage, ensuring that the input current is forced to flow through $M_2$ rather than being affected by the output voltage.\n*   **Application:** This type of circuit is often used in sensor interfaces (like photodiodes) where a small current needs to be converted to a voltage for further processing.",
        "format": "markdown",
        "sha256": "b49adb59c92f83e9d276a2c0c8bc544821c0645b607c52afb4478498b23c9338"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the biased NMOS input device and the PMOS controlled by Vout; its input-node KCL and output relation capture the return-current feedback and low-input-resistance transimpedance behavior. The square-root relation is a large-signal form whose local slope is approximately 1/gm2, with the clamped input node an acceptable idealization.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 4174,
        "total_tokens": 4470,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3157,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 4174,
        "total_tokens": 4470,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3157,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its operation.\n\n### 1. Circuit Identification\nThis circuit is a **current-to-voltage converter** (also known as a transimpedance amplifier). It converts an input current $I_{in}$ into an output voltage $V_{out}$. It utilizes two NMOS transistors ($M_1$ and $M_2$) and a constant current source $I_1$ to achieve this conversion.\n\n### 2. Node Analysis and KCL\nTo understand how the circuit works, we analyze the Kirchhoff's Current Law (KCL) at the two primary nodes: the output node ($V_{out}$) and the common source node ($V_s$).\n\n*   **At the Output Node ($V_{out}$):**\n    The current source $I_1$ flows into the node, and the current through transistor $M_1$ ($I_{D1}$) flows out of the node.\n    $$\\text{KCL: } I_1 = I_{D1}$$\n    Since $I_1$ is a constant current source, $M_1$ is forced to conduct exactly $I_1$ regardless of the input current.\n\n*   **At the Source Node ($V_s$):**\n    The input current $I_{in}$ (net current entering the node) and the current through transistor $M_2$ ($I_{D2}$) enter the node, while the current $I_{D1}$ leaves the node.\n    $$\\text{KCL: } I_{in} + I_{D2} = I_{D1}$$\n    Substituting $I_{D1} = I_1$ from the previous step:\n    $$I_{D2} = I_1 - I_{in}$$\n\n### 3. Voltage Relationships\nNow we determine how these currents translate into the output voltage $V_{out}$.\n\n*   **Source Voltage ($V_s$):**\n    Transistor $M_1$ has its gate connected to a fixed bias voltage $V_b$. Since $I_{D1} = I_1$ is constant, the gate-to-source voltage $V_{GS1}$ is also constant.\n    $$V_s = V_b - V_{GS1}(I_1)$$\n    Because $V_b$ and $I_1$ are constants, **$V_s$ remains constant** and does not change with the input current $I_{in}$.\n\n*   **Output Voltage ($V_{out}$):**\n    Transistor $M_2$ has its gate at $V_{out}$ and its source at $V_s$. The current $I_{D2}$ is determined by the gate-to-source voltage $V_{GS2} = V_{out} - V_s$.\n    Assuming $M_2$ is in the saturation region:\n    $$I_{D2} = \\frac{1}{2} \\mu_2 C_{ox2} \\frac{W_2}{L_2} (V_{out} - V_s - V_{th2})^2$$\n    Rearranging for $V_{out}$:\n    $$V_{out} = V_s + V_{th2} + \\sqrt{\\frac{2(I_1 - I_{in})}{\\mu_2 C_{ox2} (W_2/L_2)}}$$\n\n### 4. Small-Signal Analysis (Gain)\nTo find the sensitivity of the output voltage to changes in the input current, we look at the small-signal transimpedance ($R_{out} = \\frac{\\partial V_{out}}{\\partial I_{in}}$).\n\nFrom the KCL at the source node, a small change in input current $\\Delta I_{in}$ causes an equal and opposite change in the current of $M_2$:\n$$\\Delta I_{D2} = -\\Delta I_{in}$$\nSince $V_s$ is constant, the change in current through $M_2$ is related to the change in $V_{out}$ by its transconductance $g_{m2}$:\n$$\\Delta I_{D2} = g_{m2} \\cdot \\Delta V_{out}$$\nCombining these:\n$$\\Delta V_{out} = -\\frac{1}{g_{m2}} \\Delta I_{in}$$\nThe **transimpedance gain** is therefore:\n$$R_{out} = -\\frac{1}{g_{m2}}$$\nThis indicates that as the input current $I_{in}$ increases, the output voltage $V_{out}$ decreases.\n\n### Summary Table\n| Parameter | Role/Behavior |\n| :--- | :--- |\n| **$I_1$** | Sets the operating point and clamps $M_1$ current. |\n| **$V_b$** | Biases $M_1$ to keep the source node $V_s$ at a constant potential. |\n| **$M_1$** | Acts as a current-controlled voltage clamp for the source node. |\n| **$M_2$** | Acts as the primary converter, translating $I_{D2}$ into $V_{out}$. |\n| **Transfer Function** | $V_{out}$ is inversely related to $I_{in}$ (non-linear square-root relationship). |",
        "format": "markdown",
        "sha256": "7c8175ffe22e516fbbf70edd5b3d3d562a95d57a3395bde925784c5ae13f350f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It reaches a transimpedance of approximately −1/gm2 and implicitly shows Vout controlling M2’s current back into the input node. However, it explicitly misidentifies M2 as NMOS and misreads the circuit, missing the PMOS feedback device and the common-gate NMOS mechanism; the device-type rule limits this to 1.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 297,
        "output_tokens": 5059,
        "total_tokens": 5356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3907,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 297,
        "output_tokens": 5059,
        "total_tokens": 5356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3907,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its operation.\n\n### 1. Circuit Identification and Components\nThe circuit is a **current-to-voltage converter** (or transducer). It converts an input current $I_{in}$ into an output voltage $V_{out}$.\n\n**Key components:**\n*   **$V_{DD}$**: The positive supply voltage.\n*   **$I_1$**: A constant current source connected from $V_{DD}$ to the output node $V_{out}$.\n*   **$M_1, M_2$**: NMOS transistors.\n*   **$V_b$**: A constant bias voltage applied to the gate of $M_1$.\n*   **$I_{in}$**: The input signal current source.\n*   **Downward current source**: A constant bias current (let's call it $I_{bias}$) at the source node.\n*   **$V_s$**: The voltage at the common source node of $M_1$ and $M_2$.\n\n---\n\n### 2. Step-by-Step Analysis\n\n#### A. Analysis of the Output Node ($V_{out}$)\nApplying Kirchhoff's Current Law (KCL) at the $V_{out}$ node:\nThe current $I_1$ flows from $V_{DD}$ into the node, and the drain current of $M_1$ ($I_{D1}$) flows from the node toward the source $V_s$.\n$$I_{D1} = I_1$$\nSince $I_1$ is a constant current source, the current through $M_1$ is forced to be constant.\n\n#### B. Analysis of Transistor $M_1$\nAssuming $M_1$ is operating in the saturation region, its drain current is given by:\n$$I_{D1} = \\frac{1}{2} \\mu_1 C_{ox1} \\frac{W_1}{L_1} (V_{GS1} - V_{th1})^2$$\nWhere $V_{GS1} = V_b - V_s$. Since $I_{D1} = I_1$ (a constant), the gate-source voltage $V_{GS1}$ must also be constant. This means the source voltage $V_s$ is \"clamped\" to a constant value relative to $V_b$:\n$$V_s = V_b - \\left( V_{th1} + \\sqrt{\\frac{2 I_1}{\\mu_1 C_{ox1} \\frac{W_1}{L_1}}} \\right) = \\text{Constant}$$\n\n#### C. Analysis of the Source Node ($V_s$)\nApplying KCL at the source node $V_s$:\nThe net current entering the node from the input sources is $I_{in} - I_{bias}$. This current is split between $M_1$ and $M_2$:\n$$(I_{in} - I_{bias}) = I_{D1} + I_{D2}$$\nSubstituting $I_{D1} = I_1$:\n$$I_{D2} = I_{in} - I_{bias} - I_1$$\nThis shows that any change in the input current $I_{in}$ is directly reflected as a change in the drain current of $M_2$.\n\n#### D. Analysis of Transistor $M_2$ and Output Voltage\n$M_2$ is an NMOS with its drain at $V_{DD}$, source at $V_s$, and gate at $V_{out}$. Assuming it is in saturation:\n$$I_{D2} = \\frac{1}{2} \\mu_2 C_{ox2} \\frac{W_2}{L_2} (V_{GS2} - V_{th2})^2$$\nWhere $V_{GS2} = V_{out} - V_s$. Rearranging for $V_{out}$:\n$$V_{out} = V_s + V_{th2} + \\sqrt{\\frac{2 I_{D2}}{\\mu_2 C_{ox2} \\frac{W_2}{L_2}}}$$\nSubstituting the expression for $I_{D2}$:\n$$V_{out} = V_s + V_{th2} + \\sqrt{\\frac{2 (I_{in} - I_{bias} - I_1)}{\\mu_2 C_{ox2} \\frac{W_2}{L_2}}}$$\n\n---\n\n### 3. Conclusion\nThe circuit functions as a **square-root current-to-voltage converter**. \n\n*   **Mechanism**: $M_1$ acts as a current sink that stabilizes the source node $V_s$ at a constant potential. This allows $M_2$ to act as a transconductance element, converting the remaining input current into a voltage at the gate ($V_{out}$).\n*   **Transfer Characteristic**: The output voltage $V_{out}$ is proportional to the square root of the input current $I_{in}$ (offset by bias currents and threshold voltages).",
        "format": "markdown",
        "sha256": "a38da47abc9390892323ab9cf31f80adcd27d33d55b6f27be32ddabb783a99a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies M2 as an NMOS and treats the circuit as a square-root converter, missing the PMOS feedback path from Vout to the input node and the low-input-resistance current-buffer behavior.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 297,
        "output_tokens": 8797,
        "total_tokens": 9094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7691,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 297,
        "output_tokens": 8797,
        "total_tokens": 9094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7691,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the answer is **no, it does not fail to oscillate**, but it will oscillate **extremely slowly**.\n\nHere is the detailed explanation:\n\n### 1. Circuit Analysis\nThe circuit is a **ring oscillator** consisting of three NOT gates (inverters) connected in a loop. Because there is an odd number of inverters (3), the circuit is inherently unstable. If the input to the first inverter is $0$, it outputs $1$; the second inverter turns that $1$ into $0$; and the third inverter turns that $0$ back into $1$. This $1$ is then fed back into the first inverter, flipping its output to $0$, and the cycle repeats indefinitely.\n\n### 2. The Role of the Capacitors ($C_L$)\nThe capacitors $C_L$ represent the load capacitance at the output of each inverter. In a real circuit, this includes both the physical capacitors and the input capacitance of the subsequent inverter.\n\nThe **propagation delay** ($t_{pd}$) of an inverter—the time it takes for the output to change after the input changes—is directly proportional to the load capacitance it must charge or discharge:\n$$t_{pd} \\propto C_L$$\n\n### 3. Effect of \"Arbitrarily Large\" Capacitors\nThe total period of one oscillation cycle ($T$) for a ring oscillator with $N$ stages is approximately:\n$$T = 2 \\times N \\times t_{pd}$$\nFor this circuit ($N=3$):\n$$T = 6 \\times t_{pd}$$\n\nAs the capacitors $C_L$ become arbitrarily large:\n*   The **propagation delay** ($t_{pd}$) increases toward infinity.\n*   The **period** ($T$) of the oscillation also increases toward infinity.\n*   The **frequency** ($f = 1/T$) decreases toward zero.\n\n### Conclusion\nThe fundamental condition for oscillation (an odd number of inverting stages in a feedback loop) remains unchanged regardless of the size of the capacitors. Therefore, the circuit does not \"fail\" to oscillate in a logical sense; it simply becomes so slow that the frequency approaches zero. In a practical sense, the oscillation might become so slow that it appears stopped, but theoretically, the oscillation persists.",
        "format": "markdown",
        "sha256": "2b78cda595f770ffc876dd8c42746f5ff49f0dbd7dfd4446dcfd73e2e093d80d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency and supports this with the increasing-delay argument, which the golden solution explicitly accepts for full credit.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 1906,
        "total_tokens": 2202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1421,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 1906,
        "total_tokens": 2202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1421,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the principles of electronics and circuit analysis, here is the explanation:\n\n### Analysis of the Circuit\nThe figure shows a **ring oscillator** consisting of three inverters (NOT gates) connected in a loop. Because there is an odd number of inverters, the circuit is inherently unstable: if the input to the first inverter is \"low,\" the output becomes \"high,\" which eventually forces the first inverter's input to become \"high,\" which then makes the output \"low,\" and so on. This creates a continuous oscillation.\n\n### The Role of the Capacitors ($C_L$)\nThe capacitors $C_L$ represent the load capacitance at the output of each inverter (which includes both the intentional capacitors and the parasitic capacitance of the gates). \n\nThe time it takes for an inverter to switch its output from low to high (or vice versa) is called the **propagation delay** ($t_d$). This delay is directly proportional to the load capacitance:\n$$t_d \\approx R \\cdot C_L$$\nwhere $R$ is the effective output resistance of the inverter.\n\nThe total period of oscillation ($T$) for a ring oscillator with $n$ stages is approximately:\n$$T = 2 \\cdot n \\cdot t_d$$\nFor this circuit with 3 inverters:\n$$T \\approx 6 \\cdot R \\cdot C_L$$\n\n### What happens if $C_L$ becomes arbitrarily large?\nAs the capacitors $C_L$ become \"arbitrarily large\" (approaching infinity):\n1. **Propagation Delay Increases:** The time required to charge and discharge the capacitors increases linearly with $C_L$. As $C_L \\to \\infty$, the propagation delay $t_d \\to \\infty$.\n2. **Period Increases:** Since the period $T$ is proportional to $t_d$, the period of oscillation also approaches infinity ($T \\to \\infty$).\n3. **Frequency Decreases:** The frequency of oscillation ($f = 1/T$) approaches zero ($f \\to 0$).\n\n### Conclusion\n**Yes, the circuit fails to oscillate.** \n\nIn a theoretical limit where $C_L$ is infinitely large, the voltage at each node would take an infinite amount of time to reach the switching threshold of the next inverter. Consequently, the circuit would never complete a full cycle of oscillation, and the frequency would drop to zero. In a practical sense, the \"oscillation\" would become so slow that the circuit would appear to be in a static, non-oscillating state.",
        "format": "markdown",
        "sha256": "24e06fad26d589b96431dd420ee933ffa90abdcd2c72d3758e7c55b1d91ff2c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly recognizes that larger capacitance increases delay and lowers frequency, but concludes that the ring fails to oscillate. The ring continues oscillating at a lower frequency for finite capacitances, so this contradicts the central result.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 2197,
        "total_tokens": 2493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1658,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 2197,
        "total_tokens": 2493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1658,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the principles of electronics and circuit analysis, here is the explanation:\n\n### Analysis of the Circuit\nThe circuit shown is a **ring oscillator**. It consists of an odd number of inverters (three, in this case) connected in a loop. Because there is an odd number of inversions, the circuit cannot reach a stable DC equilibrium. If the input to the first inverter is $0$, the output is $1$; this $1$ goes through the second inverter to become $0$, and then through the third to become $1$. This $1$ is then fed back to the first inverter, changing its output to $0$, and the cycle repeats.\n\n### The Role of the Capacitors ($C_L$)\nThe capacitors $C_L$ represent the load capacitance at the output of each inverter. This includes the input capacitance of the following inverter and any external parasitic capacitance. \n\nThe time it takes for an inverter to switch its output voltage (the propagation delay, $t_{pd}$) is directly proportional to the load capacitance:\n$$t_{pd} \\propto R_{out} \\cdot C_L$$\nwhere $R_{out}$ is the output resistance of the inverter.\n\nThe total period of oscillation ($T$) for a ring oscillator with $N$ stages is approximately:\n$$T \\approx 2 \\cdot N \\cdot t_{pd}$$\nSince the frequency $f$ is the reciprocal of the period ($f = 1/T$), we have:\n$$f \\propto \\frac{1}{C_L}$$\n\n### Conclusion\nIf the three capacitors $C_L$ become **arbitrarily large**, the following happens:\n1. **The propagation delay increases:** It takes much longer for the inverters to charge and discharge the capacitors to switch the logic levels.\n2. **The frequency decreases:** As $C_L$ increases, the period $T$ increases, and the frequency $f$ approaches zero.\n\n**Does it \"fail\" to oscillate?**\nTechnically, **no**. The circuit does not reach a stable steady state (it doesn't \"lock up\" or become a DC circuit) because the odd number of inverters still forces the signal to eventually flip. However, as $C_L \\to \\infty$, the frequency of oscillation $f \\to 0$. \n\nIn a practical sense, if the capacitors are large enough, the oscillation would become so slow that it might appear to have stopped, but from a theoretical standpoint, the mechanism for oscillation remains intact; it simply becomes **extremely slow**.",
        "format": "markdown",
        "sha256": "4d85e08701ff1a06164a16f6b7182655dd68797df241095d97f723249ff64ee3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes the ring continues oscillating at a lower frequency and supports this with the delay increasing with load capacitance, which satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 2155,
        "total_tokens": 2451,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1617,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 296,
        "output_tokens": 2155,
        "total_tokens": 2451,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1617,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is the step-by-step analysis of what happens to the phase noise if the three capacitors ($C_L$) are doubled.\n\n### 1. Identification of the Circuit\nThe figure shows a **ring oscillator** consisting of three inverters connected in a loop. The capacitors $C_L$ represent the load capacitance at the output of each inverter stage.\n\n### 2. Effect on Oscillation Frequency ($f_0$)\nThe oscillation frequency of a ring oscillator is inversely proportional to the propagation delay ($t_d$) of the stages. The propagation delay is directly proportional to the load capacitance:\n$$t_d \\approx \\frac{C_L \\cdot \\Delta V}{I_{avg}}$$\nIf the capacitors $C_L$ are doubled, the propagation delay of each stage doubles, which causes the oscillation frequency $f_0$ to **decrease** (approximately by half).\n\n### 3. Effect on Phase Noise\nPhase noise in a ring oscillator is primarily caused by thermal noise and flicker noise in the transistors. This noise creates random voltage fluctuations at the nodes, which translate into timing jitter (phase noise).\n\n*   **Energy Storage:** Phase noise is generally inversely proportional to the total energy stored in the oscillator. The energy stored in the capacitors is $E = \\frac{1}{2} C_L V_{DD}^2$. By doubling $C_L$, you increase the energy stored in the \"tank\" of the oscillator.\n*   **Noise Filtering:** A larger capacitor acts as a more effective low-pass filter for the thermal noise currents generated by the transistors. For a given noise current, a larger $C_L$ results in a smaller voltage fluctuation ($\\Delta V = \\frac{I \\cdot \\Delta t}{C_L}$), which reduces the resulting timing jitter.\n*   **Frequency Relationship:** Because the oscillation frequency $f_0$ also drops, the relative impact of a fixed amount of time jitter on the phase is reduced.\n\n### Conclusion\nIf the three capacitors $C_L$ are doubled, the **phase noise will decrease**. \n\nIn simpler terms, increasing the capacitance increases the \"inertia\" of the oscillator, making it more resistant to the random perturbations caused by noise, thereby resulting in a \"cleaner\" (though slower) signal.",
        "format": "markdown",
        "sha256": "834ba5b38f187ad6cdcb7c257644a341bd151b39f87947f0b98a35e666b2a421"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly says doubling the capacitors roughly halves the oscillation frequency and that phase noise decreases, but it gives no phase-noise magnitude. The golden solution requires about a fourfold decrease (6 dB) at a fixed offset; the energy-storage and filtering discussion does not establish that result.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 2250,
        "total_tokens": 2545,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1763,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 2250,
        "total_tokens": 2545,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1763,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is the analysis of what happens to the phase noise if the three capacitors ($C_L$) are doubled.\n\n### 1. Identification of the Circuit\nThe figure shows a **Ring Oscillator** consisting of three inverters connected in a loop. The oscillation frequency ($f_0$) of a ring oscillator is determined by the total delay of the stages.\n\n### 2. Effect on Oscillation Frequency\nThe delay of a single inverter stage ($t_d$) is proportional to the load capacitance it must charge and discharge:\n$$t_d \\propto C_L$$\nThe oscillation frequency is given by:\n$$f_0 = \\frac{1}{2 \\cdot N \\cdot t_d}$$\nwhere $N$ is the number of stages (in this case, $N=3$). If the capacitors $C_L$ are doubled, the delay $t_d$ doubles, which causes the **oscillation frequency $f_0$ to be halved**.\n\n### 3. Effect on Phase Noise\nPhase noise in an oscillator is generally related to the ratio of the noise power to the energy stored in the oscillator. \n\n*   **Stored Energy:** The energy stored in the capacitors of the ring oscillator is $E = \\frac{1}{2} N C_L V_{DD}^2$. Doubling $C_L$ **doubles the stored energy**, which makes the oscillator more \"stable\" against random noise fluctuations.\n*   **Frequency Relationship:** Phase noise $\\mathcal{L}(\\Delta f)$ is typically proportional to the square of the oscillation frequency ($f_0^2$) and inversely proportional to the stored energy ($E$). \n    $$\\mathcal{L}(\\Delta f) \\propto \\frac{f_0^2}{E}$$\n    Substituting the relationships we found:\n    $$\\mathcal{L}(\\Delta f) \\propto \\frac{(1/C_L)^2}{C_L} \\propto \\frac{1}{C_L^3}$$\n\n### Conclusion\nIf the three capacitors $C_L$ are doubled:\n1.  The **oscillation frequency decreases** (it is halved).\n2.  The **stored energy increases**.\n\nBoth of these effects contribute to a reduction in phase noise. Therefore, **the phase noise will decrease.**",
        "format": "markdown",
        "sha256": "b2c87fc22b914fa4691e24b1ece4455a73e667838a04dfd0479c03fd6ef68314"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies that doubling the capacitors halves the oscillation frequency and predicts lower phase noise. However, its stored-energy model incorrectly implies a different scaling (an eightfold reduction); the answer does not give the correct fourfold reduction at a fixed offset frequency.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3891,
        "total_tokens": 4186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3401,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3891,
        "total_tokens": 4186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3401,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit provided, here is the analysis of what happens to the phase noise if the three capacitors ($C_L$) are doubled.\n\n### 1. Identification of the Circuit\nThe figure shows a **Ring Oscillator** consisting of three inverters connected in a loop. The oscillation frequency ($f_0$) of a ring oscillator is determined by the time delay of each stage.\n\n### 2. Effect on Oscillation Frequency\nThe delay of an inverter is proportional to the load capacitance it must charge and discharge. The formula for the oscillation frequency is approximately:\n$$f_0 \\approx \\frac{1}{2 \\cdot N \\cdot t_d}$$\nWhere $N$ is the number of stages (3 in this case) and $t_d$ is the delay of one stage. Since $t_d \\propto C_L$, the frequency is inversely proportional to the capacitance:\n$$f_0 \\propto \\frac{1}{C_L}$$\n**If $C_L$ is doubled, the oscillation frequency $f_0$ will be approximately halved.**\n\n### 3. Effect on Phase Noise\nPhase noise $\\mathcal{L}(\\Delta f)$ in a ring oscillator is caused by thermal noise. A simplified expression for the phase noise at a given offset frequency $\\Delta f$ is:\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{k T}{C_L V_{DD}^2} \\left( \\frac{f_0}{\\Delta f} \\right)^2$$\n\nWe can see two competing effects when $C_L$ is increased:\n1. **Increased Energy Storage:** A larger $C_L$ increases the energy stored in the oscillator ($E = \\frac{1}{2} C_{total} V_{DD}^2$), which makes the oscillator more \"stable\" and less susceptible to the random voltage fluctuations caused by thermal noise. This term is proportional to $1/C_L$.\n2. **Decreased Frequency:** As established above, $f_0$ decreases as $C_L$ increases. Since the phase noise is proportional to $f_0^2$, lowering the frequency significantly reduces the phase noise.\n\nSubstituting $f_0 \\propto 1/C_L$ into the phase noise equation:\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{1}{C_L} \\cdot \\left( \\frac{1}{C_L} \\right)^2 = \\frac{1}{C_L^3}$$\n\n### Conclusion\nIf the three capacitors $C_L$ are doubled:\n* **The phase noise will decrease.**\n* Mathematically, if the offset frequency $\\Delta f$ remains constant, the phase noise is expected to decrease by a factor of $2^3 = 8$ (which is approximately a **$-9\\text{ dB}$** change).\n\n**Summary:** Doubling the capacitors slows down the oscillator but significantly **improves (reduces) the phase noise**.",
        "format": "markdown",
        "sha256": "7b5fe6e40c262e3dd8e5a8e711f3e713c7833640418ae6b814192fdda896fa31"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly predicts that doubling the capacitors roughly halves the oscillation frequency and that phase noise decreases at a fixed offset. But it adds an unsupported extra 1/CL factor and concludes an 8× (9 dB) reduction instead of the expected 4× (6 dB), so the central magnitude is wrong.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3851,
        "total_tokens": 4146,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3220,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3851,
        "total_tokens": 4146,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3220,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, here is the detailed explanation:\n\n### 1. Circuit Identification\nThe circuit shown is a **ring oscillator** consisting of three inverters connected in a loop. Because there is an odd number of inverters (three), the circuit has negative feedback. If the input to the first inverter is low, the output becomes high, which eventually travels through the other two inverters to pull the input of the first inverter high, which in turn makes the output low, and so on. This creates a continuous oscillation.\n\n### 2. The Role of the Capacitor $C_L$\nThe capacitor $C_L$ is connected to the output of the first inverter. In a digital circuit, the time it takes for a signal to transition from low to high (or high to low) is determined by the **RC time constant**, where $R$ is the output resistance of the inverter and $C$ is the load capacitance.\n\nThe propagation delay ($t_p$) of the first inverter is approximately proportional to $C_L$:\n$$t_{p1} \\propto R \\cdot C_L$$\n\n### 3. Effect on Oscillation Frequency\nThe total period of oscillation ($T$) for a ring oscillator is roughly twice the sum of the propagation delays of all the stages:\n$$T \\approx 2 \\times (t_{p1} + t_{p2} + t_{p3})$$\n\nAs $C_L$ becomes larger, the propagation delay $t_{p1}$ increases. This increases the total period $T$, which means the **frequency of oscillation ($f = 1/T$) decreases**.\n\n### 4. Does it \"Fail\" to Oscillate?\nIn a theoretical, ideal sense: **No, it does not fail to oscillate.**\nAs long as the inverters have sufficient gain to drive the capacitor to the opposite voltage rail, the circuit will continue to switch states. Increasing $C_L$ simply makes the transitions slower and slower. As $C_L$ becomes \"arbitrarily large,\" the frequency approaches zero, but the fundamental condition for oscillation (odd number of inversions and loop gain $\\ge 1$) remains satisfied.\n\n**Practical Note:** In a real-world physical circuit, if $C_L$ becomes extremely large, the transition time might become so long that **leakage currents** (small currents that \"leak\" through the transistors) could dominate. If the leakage current is faster than the charging/discharging current of the capacitor, the node might settle at an intermediate voltage and stop oscillating. However, in the context of a standard electronics/VLSI problem, the answer is typically that it simply slows down.\n\n### Conclusion\n**No, the circuit does not fail to oscillate; it simply oscillates at a lower frequency as $C_L$ increases.**",
        "format": "markdown",
        "sha256": "b02a836247c08cea044ed9504129e2617a4563bb0d94608b62e7c9dd326fbc64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: for sufficiently large one-sided CL, the oscillator can fail as the dominant pole causes loop gain/phase to violate the Barkhausen condition. It correctly notes that the load increases delay and reduces frequency, but misses the limiting mechanism and incorrectly claims oscillation persists.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 3076,
        "total_tokens": 3370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2483,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 3076,
        "total_tokens": 3370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2483,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the principles of circuit analysis and digital electronics, the answer is **no**, the circuit does not \"fail\" to oscillate in a theoretical sense, but its **frequency of oscillation will decrease toward zero**.\n\nHere is the detailed explanation:\n\n### 1. Nature of the Circuit\nThe circuit shown is a **ring oscillator** consisting of three inverters. Because there is an odd number of inversions in the loop, the circuit is inherently unstable. There is no stable DC equilibrium point; if the output of the third inverter is \"High,\" it forces the first inverter to \"Low,\" which forces the second to \"High,\" which forces the third to \"Low,\" and so on.\n\n### 2. Effect of the Capacitor $C_L$\nThe oscillation frequency ($f$) of a ring oscillator is approximately determined by the total propagation delay ($\\tau_{total}$) of the loop:\n$$f \\approx \\frac{1}{2 \\cdot N \\cdot \\tau_{avg}}$$\nwhere $N$ is the number of stages and $\\tau_{avg}$ is the average delay per stage.\n\nThe propagation delay of an inverter is directly proportional to the load capacitance it must charge and discharge:\n$$\\tau \\approx R_{on} \\cdot C_{load}$$\nBy adding $C_L$ to the output of the first inverter, you are increasing the load capacitance of that specific stage. As $C_L$ becomes arbitrarily large, the time it takes for the first inverter to switch the voltage at that node from Low to High (or vice versa) increases linearly.\n\n### 3. Does it stop oscillating?\nFor a circuit to \"fail to oscillate,\" it would need to reach a stable steady-state (equilibrium). In this circuit:\n*   **Loop Gain:** The gain of the inverters remains high regardless of the capacitor.\n*   **Phase Shift:** The odd number of inversions ensures a $180^\\circ$ phase shift (logically), which maintains the instability required for oscillation.\n\nAs $C_L \\to \\infty$, the propagation delay $\\tau_1 \\to \\infty$. Consequently, the period of oscillation ($T = 1/f$) also approaches infinity. \n\n### Conclusion\nWhile the circuit will still technically oscillate because the feedback loop remains unstable, the **frequency will become arbitrarily slow**. In a practical real-world scenario, if the period becomes longer than the time it takes for the device to power down or for leakage currents to dominate, it might *appear* to have stopped. However, from a circuit theory perspective, **it does not fail to oscillate; it simply oscillates at an increasingly lower frequency.**",
        "format": "markdown",
        "sha256": "5ec4e2c4ce2d68dd0b83b373da9f6ec5b826a31ad063034a712711c797a3de94"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is opposite to the golden solution: a sufficiently large one-node load can make the loop fail to sustain oscillation through dominant-pole gain and phase roll-off. The answer correctly notes that loading increases delay, but incorrectly assumes the odd inversion guarantees instability and oscillation at arbitrarily low frequency.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 2048,
        "total_tokens": 2341,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 2048,
        "total_tokens": 2341,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is **no, theoretically it does not fail to oscillate**, but the **frequency of oscillation will approach zero**.\n\nHere is the detailed technical explanation:\n\n### 1. The Condition for Oscillation\nFor a ring oscillator to function, two main conditions must be met:\n*   **Phase Shift:** The total phase shift around the loop must be $360^\\circ$ (or an odd multiple of $180^\\circ$). With three inverters, each providing roughly $180^\\circ$ of phase shift, the total is $540^\\circ$, which satisfies the condition for instability/oscillation.\n*   **Loop Gain:** The loop gain must be greater than 1. In a CMOS inverter, the voltage gain is very high in the transition region. Adding a capacitor ($C_L$) to the output of an inverter does not change the DC gain of the amplifier; it only changes the time it takes for the output voltage to move.\n\n### 2. The Effect of $C_L$ on Frequency\nThe frequency of a ring oscillator is determined by the propagation delay ($\\tau$) of the stages:\n$$f = \\frac{1}{2 \\cdot N \\cdot \\tau}$$\nWhere $N$ is the number of stages (in this case, 3). \n\nThe propagation delay $\\tau$ of an inverter is directly proportional to the load capacitance it must charge or discharge:\n$$\\tau \\approx \\frac{C_{load} \\cdot \\Delta V}{I_{avg}}$$\nAs $C_L$ becomes \"arbitrarily large,\" the propagation delay of the first inverter increases linearly. Consequently, the period of oscillation ($T = 1/f$) increases, and the **frequency decreases**.\n\n### 3. Theoretical vs. Practical Limits\n*   **Theoretically:** As $C_L \\to \\infty$, the frequency $f \\to 0$. The circuit is still \"unstable\" and will still attempt to toggle between logic high and low; it will simply take an infinite amount of time to do so.\n*   **Practically:** In a real-world physical circuit, it **would** eventually fail to oscillate due to **leakage currents**. Every transistor has a small amount of leakage. If $C_L$ is so large that the time required to charge the capacitor exceeds the time it takes for leakage currents to neutralize the charge, the node will never reach the switching threshold of the next inverter. At that point, the circuit would settle into a meta-stable DC state and stop oscillating.\n\n### Summary\nIf you are answering this for a **circuit theory or ideal electronics course**, the answer is **No**. The capacitor affects the **speed** (frequency) of the oscillation, not the **existence** of the oscillation.",
        "format": "markdown",
        "sha256": "de83e99cdeadff20b6afb838f2948fd457fd5bcce72bf92def0ddc595f599fa6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The main conclusion is opposite to the golden answer: a very large load on one node can create a dominant pole and prevent oscillation, rather than merely driving the frequency toward zero. The answer does recognize that the loaded node slows and mentions a possible DC settling state in practice, but attributes failure only to leakage and denies the essential loop-gain/phase failure.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1519,
        "total_tokens": 1812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 293,
        "output_tokens": 1519,
        "total_tokens": 1812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit provided, which is a **3-stage ring oscillator**, doubling the widths ($W$) of the NMOS and PMOS devices will generally **decrease (improve) the phase noise**.\n\nHere is the detailed technical explanation:\n\n### 1. Effect on Frequency ($f_0$)\nThe oscillation frequency of a ring oscillator is determined by the time constant $\\tau = R \\cdot C$ of each stage.\n*   **Resistance ($R$):** The on-resistance of a MOSFET is inversely proportional to its width ($R \\propto 1/W$). Doubling the width halves the resistance ($R \\to R/2$).\n*   **Capacitance ($C$):** The gate and parasitic capacitances are directly proportional to the width ($C \\propto W$). Doubling the width doubles the capacitance ($C \\to 2C$).\n*   **Result:** Since the product $R \\cdot C$ remains constant ($\\frac{1}{2}R \\cdot 2C = RC$), the oscillation frequency $f_0$ remains approximately the same.\n\n### 2. Effect on Phase Noise ($\\mathcal{L}$)\nPhase noise in a ring oscillator is primarily driven by thermal noise. A simplified relationship for the phase noise of a ring oscillator is:\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{k T}{C_{tot} \\cdot V_{DD}^2 \\cdot f_0^2 \\cdot \\Delta f^2}$$\nWhere:\n*   $k T$ is the thermal energy.\n*   $C_{tot}$ is the total capacitance at each node.\n*   $V_{DD}$ is the supply voltage.\n*   $f_0$ is the oscillation frequency.\n\nWhen you double the widths of the transistors:\n1.  **Increased Energy Storage:** The total capacitance $C_{tot}$ doubles. Because the oscillator now stores more energy (charge) at each node for the same voltage swing, it becomes more \"resilient\" to the random fluctuations caused by thermal noise.\n2.  **Reduced Thermal Noise:** The equivalent resistance $R$ decreases, which slightly reduces the thermal noise voltage generated by the devices.\n\n### Conclusion\nBecause the capacitance $C_{tot}$ increases while the frequency $f_0$ remains constant, the phase noise $\\mathcal{L}$ decreases. In practical terms, doubling the device sizes typically results in a **3 dB reduction** in phase noise, at the cost of **doubling the power consumption** (since $P = C V^2 f$).",
        "format": "markdown",
        "sha256": "6cd7b1da182d2f804fbfca91a4b33b45629e443caecc5dd7c8376e2cd94a3a04"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The 3 dB reduction, unchanged frequency, and capacitance-based explanation are correct. However, it incorrectly attributes some improvement to lower device thermal noise; the devices’ noise current actually increases with width.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 315,
        "output_tokens": 1581,
        "total_tokens": 1896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 315,
        "output_tokens": 1581,
        "total_tokens": 1896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit provided, which is a **ring oscillator** (specifically a 3-stage ring oscillator), doubling the widths of the NMOS and PMOS devices will generally **decrease the phase noise** (i.e., improve the phase noise performance).\n\nHere is the detailed technical explanation:\n\n### 1. Effect on Capacitance and Transconductance\n*   **Capacitance ($C$):** The total capacitance at each node (gate and junction capacitance) is proportional to the width ($W$) of the transistors. Doubling the widths roughly **doubles the total capacitance** ($C \\rightarrow 2C$).\n*   **Transconductance ($g_m$):** The transconductance of the MOSFETs is also proportional to the width. Doubling the widths **doubles the $g_m$** ($g_m \\rightarrow 2g_m$).\n\n### 2. Effect on Oscillation Frequency\nThe oscillation frequency $f_0$ of a ring oscillator is approximately:\n$$f_0 \\approx \\frac{1}{2\\pi \\cdot N \\cdot R_{out} C_{load}}$$\nSince the output resistance $R_{out}$ is inversely proportional to $g_m$ ($R_{out} \\propto 1/W$) and the load capacitance $C_{load}$ is proportional to $W$, the product $R_{out} C_{load}$ remains roughly constant. Therefore, the **oscillation frequency remains approximately the same**.\n\n### 3. Effect on Phase Noise\nPhase noise in a ring oscillator is primarily caused by thermal noise and flicker noise. A simplified relationship for the phase noise $\\mathcal{L}(\\Delta\\omega)$ of a ring oscillator is:\n$$\\mathcal{L}(\\Delta\\omega) \\propto \\frac{kT}{C_{total} \\cdot V_{DD}^2 \\cdot \\Delta\\omega^2}$$\n\n*   **Noise Current:** Doubling the width increases the thermal noise current spectral density ($S_{id} = 4k T g_m$), meaning there is more raw noise current.\n*   **Noise Suppression:** However, the \"stiffness\" of the node increases because the capacitance $C$ is larger. The voltage fluctuation $\\Delta V$ caused by a noise current $\\Delta I$ is $\\Delta V \\approx \\Delta I / g_m$. Since $g_m$ increases linearly with $W$ and the noise current increases by $\\sqrt{W}$, the overall voltage noise power decreases.\n*   **Energy Storage:** Increasing the capacitance increases the energy stored in the oscillator, making it more resistant to random perturbations (noise).\n\n### Summary\nBy doubling the widths:\n1.  **Capacitance increases**, which better filters/suppresses voltage noise.\n2.  **Power consumption increases** (since $I_D$ doubles), which is the typical trade-off for lower phase noise.\n3.  **Phase noise decreases**, leading to a more stable clock signal.",
        "format": "markdown",
        "sha256": "f75ddb6d3f57bd5d0206478b7bb2770ab5660d3d8c6318cb39dac7ca7f1413fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The stated phase-noise scaling is inverse with capacitance, so doubling the capacitance implies a factor-of-two reduction (about 3 dB). It also correctly notes that device noise current and power consumption increase.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 316,
        "output_tokens": 1954,
        "total_tokens": 2270,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1327,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 316,
        "output_tokens": 1954,
        "total_tokens": 2270,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1327,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, this is a **ring oscillator** consisting of three inverter stages connected in a loop.\n\nTo determine what happens to the phase noise when the widths ($W$) of the NMOS and PMOS devices are doubled, we need to look at how the key parameters of the oscillator change:\n\n### 1. Effect on Oscillation Frequency ($f_0$)\nThe oscillation frequency of a ring oscillator is approximately determined by the time constant $\\tau = R \\cdot C$ of each stage:\n$$f_0 \\approx \\frac{1}{2 \\cdot N \\cdot R \\cdot C}$$\nwhere $N$ is the number of stages, $R$ is the effective resistance of the transistors, and $C$ is the load capacitance.\n*   **Resistance ($R$):** The on-resistance of a MOSFET is inversely proportional to its width ($R \\propto 1/W$). Doubling the width **halves the resistance**.\n*   **Capacitance ($C$):** The gate and junction capacitances are directly proportional to the width ($C \\propto W$). Doubling the width **doubles the capacitance**.\n*   **Result:** Since $R$ is halved and $C$ is doubled, the product $R \\cdot C$ remains constant. Therefore, the **oscillation frequency $f_0$ remains approximately the same**.\n\n### 2. Effect on Phase Noise\nPhase noise in a ring oscillator is primarily caused by the thermal noise of the transistors. A general rule for phase noise $\\mathcal{L}$ is that it is inversely proportional to the energy stored in the oscillator (which is stored in the capacitors):\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{kT}{C \\cdot V_{swing}^2 \\cdot f_0^2 \\cdot (\\Delta f)^2}$$\n*   **Capacitance ($C$):** As established, doubling the widths doubles the total capacitance $C$.\n*   **Voltage Swing ($V_{swing}$):** The voltage swing remains roughly the same (rail-to-rail from $0$ to $V_{DD}$).\n*   **Frequency ($f_0$):** The frequency remains constant.\n\nBecause the capacitance $C$ in the denominator doubles while other primary factors remain constant, the phase noise power decreases.\n\n### Conclusion\nIf you double the widths of the NMOS and PMOS devices:\n*   **The phase noise will decrease (improve).**\n*   Specifically, because the capacitance doubles, the phase noise power is reduced by half, which corresponds to a **$3\\text{ dB}$ improvement** in phase noise.\n\n**Summary:** Doubling the widths increases the \"inertia\" (capacitance) of the oscillator, making it less susceptible to random thermal noise fluctuations without significantly changing the operating frequency.",
        "format": "markdown",
        "sha256": "c99dfced9e4ecbf375f0ae43d42c817048462c693714fb802e0ac30be10999ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling the device widths reduces phase noise by about 3 dB. Its capacitance-scaling explanation is an accepted justification, and it correctly notes that the oscillation frequency remains approximately unchanged.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 315,
        "output_tokens": 1920,
        "total_tokens": 2235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1324,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 315,
        "output_tokens": 1920,
        "total_tokens": 2235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1324,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ seen looking into the supply node of the ring oscillator, we can perform a small-signal analysis of the circuit.\n\n### 1. Circuit Analysis\nThe ring oscillator consists of three identical CMOS inverters connected in a loop. The supply node (where $R_X$ is measured) is connected to the source of the PMOS transistor in each of the three inverters. Each inverter's output is connected to the input of the next inverter, and the NMOS transistors are connected to ground.\n\nFrom the perspective of the supply node, the circuit consists of three parallel paths to ground. Each path goes through a PMOS transistor, then through the output node of that inverter, and finally through the NMOS transistor of that same inverter to ground.\n\n### 2. Small-Signal Modeling\nLet $r_p$ be the small-signal resistance of the PMOS transistor and $r_n$ be the small-signal resistance of the NMOS transistor. In a small-signal model, we treat these transistors as resistors.\n\nFor a single inverter, the total resistance from the supply node to ground is the series combination of the PMOS and NMOS resistances:\n$$R_{\\text{inv}} = r_p + r_n$$\nThis is because the current from the supply must pass through the PMOS to reach the output node, and then through the NMOS to reach ground.\n\n### 3. Total Resistance $R_X$\nSince there are three such inverters connected in parallel to the supply node, the total small-signal resistance $R_X$ is the parallel combination of these three identical paths:\n$$\\frac{1}{R_X} = \\frac{1}{R_{\\text{inv}}} + \\frac{1}{R_{\\text{inv}}} + \\frac{1}{R_{\\text{inv}}} = \\frac{3}{R_{\\text{inv}}}$$\nSubstituting the expression for $R_{\\text{inv}}$:\n$$R_X = \\frac{R_{\\text{inv}}}{3} = \\frac{r_p + r_n}{3}$$\n\n### Conclusion\nThe small-signal resistance seen looking into the supply node is the average of the combined PMOS and NMOS resistances across the three stages.\n\n**Final Answer:**\n$$R_X = \\frac{r_p + r_n}{3}$$\n(where $r_p$ and $r_n$ are the small-signal resistances of the PMOS and NMOS transistors, respectively).",
        "format": "markdown",
        "sha256": "c120d5ca8bed9b7a6313d0e62c16fd816dbcb540465cdec355d9477ecd894852"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer recognizes the three CMOS inverters but treats them as static resistor paths and ignores the oscillation-driven charging and discharging of the load capacitances, which sets the resistance. Its series/parallel resistance model therefore gives the wrong result.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 312,
        "output_tokens": 11934,
        "total_tokens": 12246,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 312,
        "output_tokens": 11934,
        "total_tokens": 12246,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ seen looking into the supply node of the ring oscillator, we can use small-signal analysis.\n\n### 1. Circuit Analysis\nThe ring oscillator consists of three identical CMOS inverters connected in a loop. The supply node $V_{DD}$ is connected to the source of the PMOS transistor in each of the three inverters. Since these three inverters are connected in parallel to the supply node, the total small-signal conductance $G_X = 1/R_X$ is the sum of the small-signal conductances of the three individual inverters:\n$$G_X = G_{inv,1} + G_{inv,2} + G_{inv,3} = 3 G_{inv}$$\nwhere $G_{inv}$ is the small-signal conductance of a single inverter looking into its supply pin.\n\n### 2. Small-Signal Analysis of a Single Inverter\nFor a single CMOS inverter, the current from the supply $I_{DD}$ is the current flowing through the PMOS transistor. Let $\\delta V_{DD}$ be a small change in the supply voltage, and $\\delta I_{DD}$ be the resulting change in current.\nThe current through the PMOS is given by:\n$$\\delta I_{DD} = \\delta I_{D,p} = g_{m,p} \\delta V_{GS,p} + g_{ds,p} \\delta V_{DS,p}$$\nSubstituting the node voltages ($\\delta V_{GS,p} = \\delta V_{DD} - \\delta V_{in}$ and $\\delta V_{DS,p} = \\delta V_{DD} - \\delta V_{out}$):\n$$\\delta I_{DD} = g_{m,p}(\\delta V_{DD} - \\delta V_{in}) + g_{ds,p}(\\delta V_{DD} - \\delta V_{out}) = (g_{m,p} + g_{ds,p})\\delta V_{DD} - g_{m,p}\\delta V_{in} - g_{ds,p}\\delta V_{out}$$\n\nThe current through the NMOS is:\n$$\\delta I_{D,n} = g_{m,n} \\delta V_{in} + g_{ds,n} \\delta V_{out}$$\n\nSince the inverter is part of a ring and we are looking for the steady-state small-signal response, the current must be continuous from the supply to ground ($\\delta I_{D,p} = \\delta I_{D,n}$). Furthermore, due to the symmetry of the ring, the small-signal perturbations at the input and output nodes are equal: $\\delta V_{in} = \\delta V_{out} = \\delta V$.\n\nEquating the currents:\n$$(g_{m,p} + g_{ds,p})\\delta V_{DD} - (g_{m,p} + g_{ds,p})\\delta V = (g_{m,n} + g_{ds,n})\\delta V$$\nSolving for $\\delta V$:\n$$\\delta V = \\frac{g_{m,p} + g_{ds,p}}{(g_{m,p} + g_{ds,p}) + (g_{m,n} + g_{ds,n})} \\delta V_{DD}$$\n\n### 3. Calculating the Resistance\nNow, substitute $\\delta V$ back into the expression for $\\delta I_{DD}$:\n$$\\delta I_{DD} = (g_{m,n} + g_{ds,n}) \\delta V = \\frac{(g_{m,n} + g_{ds,n})(g_{m,p} + g_{ds,p})}{(g_{m,p} + g_{ds,p}) + (g_{m,n} + g_{ds,n})} \\delta V_{DD}$$\nThe resistance of a single inverter is:\n$$R_{inv} = \\frac{\\delta V_{DD}}{\\delta I_{DD}} = \\frac{(g_{m,p} + g_{ds,p}) + (g_{m,n} + g_{ds,n})}{(g_{m,n} + g_{ds,n})(g_{m,p} + g_{ds,p})} = \\frac{1}{g_{m,n} + g_{ds,n}} + \\frac{1}{g_{m,p} + g_{ds,p}}$$\nThis can be written as $R_{inv} = R_{NMOS} + R_{PMOS}$, where $R_{NMOS}$ and $R_{PMOS}$ are the effective small-signal resistances of the transistors.\n\nFinally, for the three inverters in parallel:\n$$R_X = \\frac{1}{3} R_{inv} = \\frac{1}{3} \\left( \\frac{1}{g_{m,p} + g_{ds,p}} + \\frac{1}{g_{m,n} + g_{ds,n}} \\right)$$\n\n**Final Answer:**\nThe small-signal resistance seen looking into the supply node is:\n$$R_X = \\frac{1}{3} \\left( \\frac{1}{g_{m,p} + g_{ds,p}} + \\frac{1}{g_{m,n} + g_{ds,n}} \\right)$$",
        "format": "markdown",
        "sha256": "c8eaa07d88e15accb7aa7d064f21c20ac083ecc6dd8d31cd7adeddd7090c8c55"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives a static gm/gds-based resistance and ignores the oscillation-driven charging and discharging of the load capacitances, which sets the resistance in the golden solution. Its static derivation is sufficiently consistent to merit the specified partial credit.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 312,
        "output_tokens": 9276,
        "total_tokens": 9588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 312,
        "output_tokens": 9276,
        "total_tokens": 9588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ looking into the supply node of the ring oscillator, we need to find the ratio of a small change in the supply voltage $\\Delta V_{DD}$ to the resulting change in the total current $\\Delta I_{DD}$ flowing into the circuit from the supply node.\n\n### 1. Small-Signal Model of a Single Inverter\nA CMOS inverter consists of a PMOS pull-up transistor and an NMOS pull-down transistor. The current flowing from the supply node into a single inverter is the current through the PMOS transistor:\n$$i_{DD} = g_{mp}(v_{DD} - v_{in}) + \\frac{v_{DD} - v_{out}}{r_{op}}$$\nwhere $g_{mp}$ is the transconductance of the PMOS, $r_{op}$ is its output resistance, and $v_{in}$ and $v_{out}$ are the input and output voltages of the inverter.\n\n### 2. Analysis of the Ring Oscillator\nThe ring oscillator consists of three identical inverters connected in a loop. The total current from the supply is the sum of the currents into each of the three inverters:\n$$\\Delta I_{DD, total} = \\sum_{k=1}^3 \\left[ g_{mp}(\\Delta v_{DD} - \\Delta v_{in,k}) + \\frac{\\Delta v_{DD} - \\Delta v_{out,k}}{r_{op}} \\right]$$\nSince it is a ring, the sum of the input voltage changes is equal to the sum of the output voltage changes: $\\sum \\Delta v_{in,k} = \\sum \\Delta v_{out,k} = S$.\n$$\\Delta I_{DD, total} = 3(g_{mp} + 1/r_{op})\\Delta v_{DD} - (g_{mp} + 1/r_{op})S$$\n\nTo find $S$, we look at the output nodes. For each stage, the net current at the output node is zero (ignoring capacitance for small-signal resistance):\n$$\\Delta i_{PMOS,k} - \\Delta i_{NMOS,k} = 0$$\n$$\\left[ g_{mp}(\\Delta v_{DD} - \\Delta v_{in,k}) + \\frac{\\Delta v_{DD} - \\Delta v_{out,k}}{r_{op}} \\right] - \\left[ g_{mn}(\\Delta v_{in,k} - \\Delta v_{out,k}) + \\frac{\\Delta v_{out,k}}{r_{on}} \\right] = 0$$\nSumming these equations for all three stages:\n$$3(g_{mp} + 1/r_{op})\\Delta v_{DD} - S(g_{mp} + 1/r_{op}) - g_{mn}S + g_{mn}S - \\frac{S}{r_{on}} = 0$$\n$$S(g_{mp} + 1/r_{op} + 1/r_{on}) = 3\\Delta v_{DD}(g_{mp} + 1/r_{op})$$\n$$S = \\frac{3\\Delta v_{DD}(g_{mp} + 1/r_{op})}{g_{mp} + 1/r_{op} + 1/r_{on}}$$\n\n### 3. Calculating the Total Resistance\nSubstitute $S$ back into the expression for $\\Delta I_{DD, total}$:\n$$\\Delta I_{DD, total} = 3(g_{mp} + 1/r_{op})\\Delta v_{DD} \\left[ 1 - \\frac{g_{mp} + 1/r_{op}}{g_{mp} + 1/r_{op} + 1/r_{on}} \\right]$$\n$$\\Delta I_{DD, total} = 3(g_{mp} + 1/r_{op})\\Delta v_{DD} \\left[ \\frac{1/r_{on}}{g_{mp} + 1/r_{op} + 1/r_{on}} \\right] = \\frac{3(g_{mp} + 1/r_{op})}{r_{on}(g_{mp} + 1/r_{op} + 1/r_{on})} \\Delta v_{DD}$$\n\nThe small-signal resistance $R_X$ is:\n$$R_X = \\frac{\\Delta v_{DD}}{\\Delta I_{DD, total}} = \\frac{r_{on}(g_{mp} + 1/r_{op} + 1/r_{on})}{3(g_{mp} + 1/r_{op})}$$\n\nIn the typical case where $g_{mp} \\gg 1/r_{op}$ and $r_{on}$ is large, the expression simplifies to:\n$$R_X \\approx \\frac{r_{on} g_{mp}}{3 g_{mp}} = \\frac{r_{on}}{3}$$\n\n**Conclusion:**\nThe small-signal resistance seen looking into the supply node is approximately the parallel combination of the output resistances of the NMOS transistors in the three inverters.\n\n$$R_X \\approx \\frac{r_{on}}{3}$$",
        "format": "markdown",
        "sha256": "fcaaad5e46dbc7c6febad560d40ce4a740f0e2f563bb3004d76ad657b0ac4e8a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the supply-current ratio and the three inverter stages, but analyzes a static circuit, ignores the oscillation-driven charging of the load capacitances, and uses an incorrect NMOS small-signal term. Thus the result r_on/3 misses the dominant mechanism and is not the resistance asked for.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 312,
        "output_tokens": 13035,
        "total_tokens": 13347,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11893,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 312,
        "output_tokens": 13035,
        "total_tokens": 13347,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11893,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is: **No, the answer does not change.**\n\nEven though the circuit is oscillating and the nodes are not physically tied together (as they would be in a diode-connected configuration), the **time-averaged** small-signal resistance seen from the supply node remains the same.\n\nHere is the detailed explanation of why this is the case:\n\n### 1. The \"Diode-Connected\" Logic\nIn the provided calculation, the assumption is that each inverter behaves like two diode-connected transistors in series. For a single diode-connected inverter, the input is tied to the output ($v_{in} = v_{out}$). The current drawn from the supply is:\n$$i_{DD} \\approx g_{mp}(v_{DD} - v_{out}) = g_{mn}(v_{out} - 0)$$\nSolving for $v_{out}$ and substituting it back into the current equation gives:\n$$i_{DD} = \\frac{g_{mp} g_{mn}}{g_{mp} + g_{mn}} v_{DD} \\implies R_{inv} = \\frac{1}{g_{mp}} + \\frac{1}{g_{mn}}$$\nSince there are 3 inverters in parallel relative to the supply node, the total resistance is $R_X = \\frac{1}{3} R_{inv}$.\n\n### 2. The Oscillating Case\nWhen the circuit oscillates, the nodes $v_1, v_2,$ and $v_3$ are not equal to each other, nor are they equal to their respective inputs at any single instant. However, we are looking for the small-signal resistance $R_X = \\frac{\\Delta V_{DD}}{\\Delta I_{total}}$.\n\nThe total current $\\Delta I_{total}$ is the sum of the currents drawn by the three PMOS devices:\n$$\\Delta I_{total} = \\sum_{k=1}^{3} \\Delta i_{DD,k} \\approx \\sum_{k=1}^{3} g_{mp} (\\Delta V_{DD} - \\Delta v_{in,k} - \\Delta v_{out,k})$$\n*(Note: The exact small-signal model for the PMOS current is $\\Delta i_d = g_{mp}(\\Delta V_{DD} - \\Delta v_{in}) - \\frac{\\Delta v_{out}}{r_{op}}$, but for simplicity, we focus on the transconductance terms).*\n\nIn a ring oscillator, the nodes are connected in a loop. Therefore:\n$$\\sum \\Delta v_{in,k} = \\Delta v_3 + \\Delta v_1 + \\Delta v_2$$\n$$\\sum \\Delta v_{out,k} = \\Delta v_1 + \\Delta v_2 + \\Delta v_3$$\nThe sum of the input voltages is identical to the sum of the output voltages.\n\n### 3. The Equilibrium Shift\nIf $V_{DD}$ changes by a small amount $\\Delta V_{DD}$, the entire oscillation waveform shifts. The nodes $v_k$ will adjust to a new average value to maintain the oscillation. Summing the KCL equations for all three nodes:\n$$\\sum C \\frac{d \\Delta v_{out,k}}{dt} = \\sum (g_{mp} \\Delta V_{DD} - g_{mp} \\Delta v_{in,k} - g_{mn} \\Delta v_{out,k})$$\nIn steady-state oscillation, the average derivative is zero. Let $S = \\sum \\Delta v_k$:\n$$0 = 3 g_{mp} \\Delta V_{DD} - (g_{mp} + g_{mn}) S \\implies S = \\frac{3 g_{mp}}{g_{mp} + g_{mn}} \\Delta V_{DD}$$\n\nSubstituting this sum $S$ back into the total current equation:\n$$\\Delta I_{total} = 3 g_{mp} \\Delta V_{DD} - g_{mp} S = 3 g_{mp} \\Delta V_{DD} \\left( 1 - \\frac{g_{mp}}{g_{mp} + g_{mn}} \\right)$$\n$$\\Delta I_{total} = 3 g_{mp} \\Delta V_{DD} \\left( \\frac{g_{mn}}{g_{mp} + g_{mn}} \\right) = \\frac{3 g_{mp} g_{mn}}{g_{mp} + g_{mn}} \\Delta V_{DD}$$\n\n### Conclusion\nRearranging for $R_X$:\n$$R_X = \\frac{\\Delta V_{DD}}{\\Delta I_{total}} = \\frac{g_{mp} + g_{mn}}{3 g_{mp} g_{mn}} = \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)$$\nThe result is identical. The oscillation effectively \"averages out\" the node voltages, making the ring behave like a set of parallel diode-connected inverters biased at their trip point.",
        "format": "markdown",
        "sha256": "44da503318216d8d5268b234b9c96d49e126b0624cab411f90b4c025ce2fa715"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It states that the static resistance formula remains valid, matching the limited partial-credit case, but misses the oscillating circuit’s dominant capacitive charging mechanism and presents an unsupported averaging argument as if the formula were exact.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 396,
        "output_tokens": 3551,
        "total_tokens": 3947,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2462,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 396,
        "output_tokens": 3551,
        "total_tokens": 3947,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2462,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is **yes, the answer changes**, and more importantly, the fundamental assumptions used to derive that formula become invalid.\n\nHere is the detailed explanation of why the \"diode-connected\" approximation fails when the circuit oscillates.\n\n### 1. The Assumption of a Static Operating Point\nSmall-signal analysis is performed by linearizing a circuit around a **fixed DC operating point** (Quiescent point or Q-point). \n\nThe formula $R_X \\approx \\frac{1}{3} (\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}})$ assumes that the inverters are biased exactly at their switching threshold ($V_{in} \\approx V_{out} \\approx V_{DD}/2$). In this specific state, both the NMOS and PMOS are turned on and acting as linear resistors (or \"diode-connected\" devices), creating a conductive path from $V_{DD}$ to ground.\n\n### 2. What happens during oscillation?\nWhen the ring oscillator oscillates, it does not stay at the switching threshold. Instead, the nodes swing between $V_{DD}$ and $GND$. \n\n*   **State A (Output High):** The PMOS is ON and the NMOS is OFF. The path to ground is blocked by the NMOS. The resistance looking into the supply node for that specific inverter becomes very high (essentially the OFF-resistance of the NMOS).\n*   **State B (Output Low):** The NMOS is ON and the PMOS is OFF. The path from the supply node is blocked by the PMOS. The resistance looking into the supply node becomes very high (the OFF-resistance of the PMOS).\n*   **Transition:** Both devices are ON only for a very brief moment during the rise and fall of the signal.\n\nBecause the circuit is constantly switching, there is no single \"small-signal resistance.\" Instead, the resistance $R_X$ becomes a **time-varying function** $R_X(t)$ that fluctuates wildly at the frequency of oscillation.\n\n### 3. The \"Average\" vs. \"Small-Signal\" Resistance\nIf the \"somebody\" in your prompt was trying to calculate the **average current draw** ($\\text{Power} = V_{DD}^2 / R_X$), the diode-connected model is still a poor approximation for a switching oscillator. \n\nIn a switching oscillator, the majority of the current is consumed during the transitions (short-circuit current) and during the charging/discharging of the parasitic capacitances. The \"diode-connected\" model describes a **leaky** state, whereas an oscillator is a **switching** system.\n\n### Summary of Changes\n| Feature | Static (Biased at Threshold) | Oscillating |\n| :--- | :--- | :--- |\n| **Operating Point** | Constant ($V_{DD}/2$) | Time-varying (Limit Cycle) |\n| **Device State** | Both NMOS/PMOS are ON | Alternating ON/OFF |\n| **$R_X$ Value** | Constant $\\approx \\frac{1}{3}(\\frac{1}{g_n} + \\frac{1}{g_p})$ | Time-varying $R_X(t)$ |\n| **Model Validity** | Valid linear approximation | Invalid; requires large-signal/time-domain analysis |",
        "format": "markdown",
        "sha256": "b600f7d4edc3912ef2300ccb3d92414153631e072570f66e6809ee85afc2bf39"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that oscillation invalidates a static small-signal model, but wrongly concludes the supply resistance becomes much higher because devices are off most of the cycle. It misses that capacitive charging and discharging set the average current and leave RX on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 396,
        "output_tokens": 2295,
        "total_tokens": 2691,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 396,
        "output_tokens": 2295,
        "total_tokens": 2691,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, the answer changes.**\n\nHere is the detailed explanation of why the \"diode-connected\" assumption fails when the circuit is oscillating.\n\n### 1. The \"Diode-Connected\" Assumption\nThe calculation $R_X \\approx \\frac{1}{3} (\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}})$ is based on the assumption that each inverter is biased at its **switching threshold** (the trip point). \n\nIn a diode-connected inverter (or one biased at the threshold), the input voltage $V_{in}$ is approximately equal to the output voltage $V_{out}$. In this specific state, both the NMOS and PMOS transistors are turned **ON** and are conducting current simultaneously. The small-signal resistance of a single inverter in this state is indeed the series combination of the two transistors' resistances:\n$$r_{inv} = \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}$$\nSince there are three inverters in parallel relative to the supply node, the total resistance is $R_X = \\frac{1}{3} r_{inv}$.\n\n### 2. What happens during oscillation?\nWhen the ring oscillator is actually oscillating, the circuit is no longer biased at a single static point. Instead, the voltages at the nodes are swinging dynamically between $0\\text{V}$ and $V_{DD}$.\n\n*   **State-Dependent Resistance:** At any given moment in the oscillation cycle, an inverter is typically in one of two primary states:\n    *   **PMOS ON / NMOS OFF:** The output is being pulled high. The NMOS is cut off ($g_{mn} \\approx 0$), so the resistance seen from the supply is dominated by the PMOS.\n    *   **PMOS OFF / NMOS ON:** The output is being pulled low. The PMOS is cut off ($g_{mp} \\approx 0$), meaning the supply node is effectively disconnected from the ground through that inverter (infinite resistance).\n*   **The \"Both-ON\" Region is Transient:** The condition where both transistors are active (the \"diode-connected\" behavior) only occurs during the very brief transition periods when the signal is switching from low-to-high or high-to-low.\n\n### 3. Conclusion\nIf the circuit is oscillating, the small-signal resistance $R_X$ is no longer a constant value; it becomes **time-varying**. \n\nIf you are looking for the **average** small-signal resistance over a full period:\n1.  The inverters spend the majority of their time in states where one transistor is OFF.\n2.  Because the \"OFF\" state represents an open circuit (very high resistance), the average resistance $R_X$ will be **significantly higher** than the value calculated using the diode-connected assumption.\n\nThe original calculation describes the resistance of the circuit if it were **stuck** at the switching threshold; it does not describe the resistance of a **functioning** oscillator.",
        "format": "markdown",
        "sha256": "f2f36bcdef0b9f5eb22e8a0a1827daf03904550175cbcada47c89403f58debc7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer recognizes that oscillation invalidates the static diode-connected analysis, but reaches the opposite conclusion: the supply resistance does not become much higher just because devices are off part of the cycle. It misses the dominant capacitive charging mechanism and the result that RX remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 396,
        "output_tokens": 3636,
        "total_tokens": 4032,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2987,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 396,
        "output_tokens": 3636,
        "total_tokens": 4032,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2987,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis of the provided image, which depicts a **StrongArm Latch** (a common high-speed comparator circuit), here is the step-by-step explanation of what happens to the initial voltage gain as the width of $M_7$ increases.\n\n### 1. Circuit Analysis\nThe circuit operates in two main phases: a reset phase (controlled by $CK$ and the switches $S_1-S_4$) and an evaluation phase. The \"initial voltage gain\" refers to the small-signal gain at the very beginning of the evaluation phase, before the positive feedback of the cross-coupled pairs ($M_3-M_6$) takes over to drive the output to the supply rails.\n\nIn this initial phase, the circuit behaves like a **differential amplifier**:\n* **Input Stage:** $M_1$ and $M_2$ form a differential pair.\n* **Tail Current Source:** $M_7$ acts as the current source that provides the bias current ($I_{D7}$) to the differential pair.\n* **Load:** The load for the differential pair consists of the parallel combination of the cross-coupled transistors ($M_3, M_4, M_5, M_6$).\n\n### 2. Effect of Increasing the Width of $M_7$\nIncreasing the width ($W_7$) of transistor $M_7$ while keeping the gate voltage ($CK$) constant increases the current it can conduct:\n$$I_{D7} \\propto W_7$$\nSince $M_7$ is the tail current source, an increase in $W_7$ leads to an increase in the drain currents of the input transistors, $I_{D1}$ and $I_{D2}$.\n\n### 3. Impact on Voltage Gain\nThe initial voltage gain ($A_v$) of a differential pair is approximately given by:\n$$A_v \\approx g_{m1} \\cdot r_{out}$$\nWhere:\n* **Transconductance ($g_{m1}$):** For a MOSFET in saturation, $g_{m1} = \\sqrt{2\\mu_n C_{ox} \\frac{W_1}{L_1} I_{D1}}$. Thus, $g_{m1}$ is proportional to $\\sqrt{I_{D1}}$.\n* **Output Resistance ($r_{out}$):** The output resistance at nodes $X$ and $Y$ is the parallel combination of the output resistances of the transistors ($r_{o1}, r_{o3}, r_{o5}$, etc.). Since $r_o \\approx \\frac{1}{\\lambda I_D}$, the total output resistance is inversely proportional to the current: $r_{out} \\propto \\frac{1}{I_{D1}}$.\n\nCombining these, the gain scales as:\n$$A_v \\propto \\sqrt{I_{D1}} \\cdot \\frac{1}{I_{D1}} = \\frac{1}{\\sqrt{I_{D1}}}$$\n\n### Conclusion\nAs the width of $M_7$ increases, the bias current $I_{D1}$ increases. Because the output resistance decreases faster than the transconductance increases, the overall **initial voltage gain decreases**.\n\n**Summary:**\nIncreasing the width of $M_7 \\implies$ Increasing tail current $\\implies$ **Decreasing initial voltage gain**.",
        "format": "markdown",
        "sha256": "df59885465af73e11c269225e67f8978526170fc26f5c7da540242b84f50b854"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The trend and tail-current increase are correct. However, it explains the decrease using a generic gm·ro differential-amplifier model rather than the StrongARM’s initial integration gain, which depends on gm/ICM; this is a modeling flaw despite reaching the right conclusion.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 302,
        "output_tokens": 3070,
        "total_tokens": 3372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2355,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 302,
        "output_tokens": 3070,
        "total_tokens": 3372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2355,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine what happens to the initial voltage gain as the width of transistor $M_7$ increases, we need to analyze the small-signal behavior of the circuit during its initial evaluation phase.\n\n### 1. Role of $M_7$\nTransistor $M_7$ acts as the **tail current source** for the differential pair ($M_1$ and $M_2$). The current $I_{tail}$ flowing through $M_7$ is proportional to its width $W_7$ (assuming it is operating in the saturation region and the gate voltage $CK$ is constant):\n$$I_{tail} \\propto W_7$$\nIncreasing the width of $M_7$ increases the total current available to the input differential pair.\n\n### 2. Effect on Transconductance ($g_m$)\nThe transconductance $g_{m1}$ of the input transistor $M_1$ is given by:\n$$g_{m1} = \\sqrt{2\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 I_{D1}}$$\nSince $I_{D1} \\approx \\frac{1}{2} I_{tail}$, we can see that:\n$$g_{m1} \\propto \\sqrt{I_{tail}}$$\nThus, increasing $W_7$ increases $g_{m1}$.\n\n### 3. Effect on Output Resistance ($R_{out}$)\nThe initial voltage gain is determined by the transconductance of the input pair and the output resistance at nodes $X$ and $Y$. The output resistance $R_{out}$ is the parallel combination of the output resistances ($r_o$) of the transistors connected to those nodes ($M_1, M_3, M_5$):\n$$R_{out} \\approx r_{o1} \\parallel r_{o3} \\parallel r_{o5}$$\nThe output resistance of a MOSFET in saturation is inversely proportional to the drain current:\n$$r_o = \\frac{1}{\\lambda I_D} \\propto \\frac{1}{I_{tail}}$$\nTherefore, increasing $W_7$ (and thus $I_{tail}$) **decreases** the output resistance $R_{out}$.\n\n### 4. Impact on Voltage Gain ($A_v$)\nThe initial voltage gain $A_v$ is the product of the transconductance and the output resistance:\n$$A_v = g_{m1} \\cdot R_{out}$$\nSubstituting the proportionalities we found:\n$$A_v \\propto \\sqrt{I_{tail}} \\cdot \\frac{1}{I_{tail}} = \\frac{1}{\\sqrt{I_{tail}}}$$\n\nAs the width of $M_7$ increases, $I_{tail}$ increases, which causes the term $\\frac{1}{\\sqrt{I_{tail}}}$ to decrease.\n\n**Conclusion:**\nAs the width of $M_7$ increases, the **initial voltage gain decreases**.",
        "format": "markdown",
        "sha256": "8b7989a610782518718dde4da85f9380181fe796119b1dc8c5129ab008a6370d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain decreases: a wider M7 raises tail current, while the input-pair transconductance grows sublinearly and the current-dependent gain factor falls. The output-resistance model is simplified but supports the correct trend.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 302,
        "output_tokens": 4162,
        "total_tokens": 4464,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 302,
        "output_tokens": 4162,
        "total_tokens": 4464,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine what happens to the initial voltage gain as the width of transistor $M_7$ increases, we need to analyze the circuit's operation during its initial evaluation phase.\n\n### 1. Circuit Analysis\nThe circuit shown is a **StrongARM latch** (a common dynamic comparator). It consists of:\n* **Input Stage:** A differential pair formed by NMOS transistors $M_1$ and $M_2$.\n* **Tail Current Source:** NMOS transistor $M_7$, which is turned on by the clock signal $CK$.\n* **Load/Regeneration Stage:** Cross-coupled NMOS ($M_3, M_4$) and PMOS ($M_5, M_6$) pairs that provide positive feedback to drive the output to rail voltages.\n\n### 2. Defining \"Initial Voltage Gain\"\nThe \"initial voltage gain\" refers to the small-signal gain of the circuit at the very beginning of the evaluation phase, before the positive feedback of the cross-coupled pairs takes over and saturates the output. In this phase, the circuit behaves like a standard differential amplifier.\n\nThe voltage gain ($A_v$) of a differential pair with an active load is approximately:\n$$A_v \\approx g_{m1} \\cdot R_{\\text{load}}$$\nwhere $g_{m1}$ is the transconductance of the input transistor $M_1$, and $R_{\\text{load}}$ is the output resistance at the nodes $X$ and $Y$.\n\n### 3. Effect of Increasing the Width of $M_7$\nIncreasing the width ($W_7$) of the tail transistor $M_7$ increases the total tail current $I_{D7}$ flowing through the circuit. This current is split between the two branches, so the current through $M_1$ ($I_{D1}$) also increases:\n$$I_{D1} \\propto W_7$$\n\nNow, let's look at how $g_{m1}$ and $R_{\\text{load}}$ change with $I_{D1}$:\n* **Transconductance ($g_{m1}$):** For a transistor in saturation, $g_m = \\sqrt{2\\mu_n C_{ox} \\frac{W}{L} I_D}$. Therefore, $g_{m1}$ increases proportionally to the square root of the current:\n  $$g_{m1} \\propto \\sqrt{I_{D1}}$$\n* **Load Resistance ($R_{\\text{load}}$):** The load is formed by the output resistances ($r_o$) of the cross-coupled transistors. Since $r_o = \\frac{1}{\\lambda I_D}$, the load resistance is inversely proportional to the current:\n  $$R_{\\text{load}} \\approx r_{o3} \\parallel r_{o5} \\propto \\frac{1}{I_{D1}}$$\n\n### 4. Combining the Effects\nSubstituting these proportionalities into the gain equation:\n$$A_v \\propto \\sqrt{I_{D1}} \\cdot \\frac{1}{I_{D1}} = \\frac{1}{\\sqrt{I_{D1}}}$$\n\nSince $I_{D1}$ increases as the width of $M_7$ increases, the term $\\frac{1}{\\sqrt{I_{D1}}}$ decreases.\n\n**Conclusion:**\nAs the width of $M_7$ increases, the tail current increases. While this increases the transconductance of the input pair, it decreases the output resistance of the load more significantly. Consequently, the **initial voltage gain decreases**.",
        "format": "markdown",
        "sha256": "d99de89e20cd1f3e52d439414177cdd624fef797d1a5f5b95453c01a051dbb47"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the correct decreasing trend and recognizes that a wider M7 raises tail current while input-pair transconductance grows only as √I. However, it relies on a static gm·ro active-load model rather than the initial StrongARM integration gain, roughly gm/ICM before regeneration, so its mechanism is imprecise.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 302,
        "output_tokens": 5652,
        "total_tokens": 5954,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4888,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 302,
        "output_tokens": 5652,
        "total_tokens": 5954,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4888,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, this is a **dynamic latch** (often used as a high-speed comparator, such as a StrongArm latch). To understand what happens to the initial voltage gain when the capacitance at nodes $P$ and $Q$ is increased, we need to analyze the circuit's operation during the evaluation phase.\n\n### 1. Circuit Operation\nWhen the clock signal $CK$ goes high, the tail transistor $M_7$ turns on, allowing current to flow through the differential input pair ($M_1$ and $M_2$). \n*   The input pair converts the differential input voltage $\\Delta V_{in} = V_{in1} - V_{in2}$ into a differential current $\\Delta I$.\n*   This current difference $\\Delta I$ charges and discharges the parasitic (or intentional) capacitances at nodes $P$ and $Q$.\n\n### 2. Defining \"Initial Voltage Gain\"\nIn a dynamic circuit, the \"initial voltage gain\" refers to the transient response at the very beginning of the evaluation phase, before the positive feedback from the cross-coupled transistors ($M_3, M_4, M_5, M_6$) takes over and drives the output to the supply rails.\n\nDuring this initial linear phase, the rate of change of the voltage at nodes $P$ and $Q$ is governed by the fundamental capacitor equation:\n$$\\frac{dV}{dt} = \\frac{I}{C}$$\n\nSubstituting the current from the input pair ($I \\approx g_m \\cdot \\Delta V_{in}$), the rate of voltage development is:\n$$\\frac{dV_{P,Q}}{dt} \\approx \\frac{g_m \\cdot \\Delta V_{in}}{C_{P,Q}}$$\n\n### 3. Effect of Increasing Capacitance\nThe \"initial gain\" in this context can be viewed as the ratio of the output voltage developed to the input voltage difference over a short time interval $\\Delta t$:\n$$\\text{Initial Gain} \\approx \\frac{\\Delta V_{out}}{\\Delta V_{in}} \\approx \\frac{g_m \\cdot \\Delta t}{C_{P,Q}}$$\n\nFrom this relationship, we can see that the initial voltage gain is **inversely proportional** to the capacitance at nodes $P$ and $Q$.\n\n### Conclusion\nIf you increase the capacitance at nodes $P$ and $Q$:\n*   **The initial voltage gain decreases.**\n*   The voltage at nodes $P$ and $Q$ will change more slowly for the same input difference.\n*   This results in a slower overall response time (increased propagation delay) for the comparator, as it will take longer for the circuit to reach the threshold where the positive feedback triggers the regenerative latching process.",
        "format": "markdown",
        "sha256": "2210b5ff4325450f0ffea923618d579e1de6964901dd0f60c1de83ea229ce94d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance slows the node-voltage transient, but it mistakes the fixed-time voltage slope for the initial gain. The longer amplification phase compensates for the reduced slope, so the initial gain remains approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 4953,
        "total_tokens": 5254,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 4953,
        "total_tokens": 5254,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, this is a **dynamic comparator** (specifically, a StrongArm-style latch or a similar differential dynamic comparator). \n\nTo understand what happens to the initial voltage gain when the capacitance at nodes $P$ and $Q$ is increased, let's analyze the operation:\n\n### 1. Circuit Operation\n*   **Reset Phase:** When the clock signal $CK$ is low, the switches $S_1, S_2, S_3,$ and $S_4$ are closed (assuming they are PMOS), pulling nodes $P, Q, X,$ and $Y$ up to $V_{DD}$.\n*   **Evaluation Phase:** When $CK$ goes high, the switches $S_1-S_4$ open, and the tail transistor $M_7$ turns on. The differential input pair ($M_1, M_2$) begins to discharge the capacitors at nodes $P$ and $Q$.\n\n### 2. The \"Initial Voltage Gain\"\nThe \"initial\" phase refers to the period immediately after $CK$ goes high, before the positive feedback of the cross-coupled latches ($M_3, M_4$ and $M_5, M_6$) takes over. During this brief window, the circuit behaves like a standard differential amplifier.\n\nThe voltage at nodes $P$ and $Q$ changes based on the current flowing through $M_1$ and $M_2$. The rate of change of the voltage difference ($\\Delta V_{PQ}$) is given by:\n$$\\frac{d(V_P - V_Q)}{dt} = \\frac{I_{D2} - I_{D1}}{C_P} \\approx \\frac{g_{m1} \\cdot (V_{in1} - V_{in2})}{C_P}$$\n\nThe **initial voltage gain** (the sensitivity of the output voltage change relative to the input voltage difference) is proportional to the transconductance ($g_m$) of the input pair and inversely proportional to the capacitance ($C_P, C_Q$) at those nodes.\n\n### 3. Effect of Increasing Capacitance\nIf you increase the capacitance at nodes $P$ and $Q$:\n*   **Slower Discharge:** For the same input voltage difference $(V_{in1} - V_{in2})$, the nodes $P$ and $Q$ will discharge more slowly.\n*   **Reduced Voltage Swing:** The voltage difference $\\Delta V_{PQ}$ will develop more slowly over time.\n*   **Lower Gain:** Since the gain is effectively the ratio of the output voltage change to the input voltage change, increasing the denominator ($C_P, C_Q$) reduces the overall gain.\n\n**Conclusion:**\nIncreasing the capacitance at nodes $P$ and $Q$ will **decrease the initial voltage gain**. This results in a slower response time and a longer \"decision time\" for the comparator to resolve the input difference.",
        "format": "markdown",
        "sha256": "a94f4cc87831a1bdce5dbd65a9cff3e06975486f23c9cf8d9be55662afdaa0c9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The main conclusion is opposite to the golden answer: the initial gain remains essentially unchanged because the longer amplification interval cancels the reduced voltage slope. The answer correctly notes that increased capacitance slows the transient, but mistakes that for a reduction in initial gain.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 2837,
        "total_tokens": 3138,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2208,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 2837,
        "total_tokens": 3138,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2208,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is the analysis of what happens to the initial voltage gain if the capacitance at nodes $P$ and $Q$ is increased.\n\n### 1. Understanding the Circuit\nThe figure shows a **dynamic comparator** (specifically, a variation of a StrongArm latch). This circuit is designed to compare two input voltages, $V_{in1}$ and $V_{in2}$, and output a logic level based on which one is larger.\n\nThe operation happens in two main phases after the clock signal $CK$ goes high:\n*   **The Initial (Linear) Phase:** The circuit acts as a differential amplifier. The input pair ($M_1, M_2$) converts the input voltage difference $\\Delta V_{in}$ into a current difference, which then develops a voltage difference at nodes $P$ and $Q$.\n*   **The Regenerative (Positive Feedback) Phase:** Once the voltage difference at $P$ and $Q$ is sufficient, the cross-coupled pairs ($M_3, M_4$ and $M_5, M_6$) provide strong positive feedback, rapidly driving the output to a full-rail logic level.\n\n### 2. Defining \"Initial Voltage Gain\"\nThe **initial voltage gain** refers to the small-signal gain of the first stage (the differential amplifier) before the positive feedback kicks in. For a differential pair with a load, the voltage gain $A_v$ is generally given by:\n$$A_v = g_{m1,2} \\cdot R_{out}$$\nWhere:\n*   $g_{m1,2}$ is the transconductance of the input transistors $M_1$ and $M_2$.\n*   $R_{out}$ is the output resistance seen at nodes $P$ and $Q$ (the parallel combination of the output resistances of $M_1, M_2$ and the load transistors $M_3, M_4$).\n\n### 3. Effect of Increasing Capacitance at Nodes $P$ and $Q$\n*   **On Voltage Gain:** The voltage gain $A_v$ is determined by the transconductance and the output resistance of the transistors. These are properties of the device geometry and the bias current. **Capacitance does not affect the DC or low-frequency voltage gain.** Therefore, the initial voltage gain **remains the same**.\n*   **On Speed (Transient Response):** While the gain remains the same, the capacitance $C_{P,Q}$ directly affects the **time constant** $\\tau = R_{out} \\cdot C_{P,Q}$. The rate at which the voltage develops at nodes $P$ and $Q$ is:\n    $$\\frac{dV_{out}}{dt} \\approx \\frac{I_{diff}}{C_{P,Q}}$$\n    Increasing the capacitance will slow down the rate at which the voltage difference grows. This means it will take longer for the circuit to reach the threshold where positive feedback takes over, thereby **increasing the decision time** (decreasing the speed) of the comparator.\n\n### Conclusion\nIncreasing the capacitance at nodes $P$ and $Q$ **does not change the initial voltage gain**, but it **decreases the speed** of the circuit by increasing the time it takes for the output voltage to develop.",
        "format": "markdown",
        "sha256": "3bb31a4a90269d18299e80ddf6db851ac56866ac8f948b8f1a348e4a556b8baf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The conclusion that initial gain is unchanged and the transient is slower is correct. However, it justifies this using DC/low-frequency gain and an output-resistance model; Razavi’s initial gain is a transient gain, unchanged because the longer amplification interval compensates for the slower node-voltage buildup.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 5142,
        "total_tokens": 5443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 5142,
        "total_tokens": 5443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, increasing the widths of transistors **$M_5$ and $M_6$** will generally cause the speed of the circuit to **degrade**.\n\nHere is the detailed reasoning:\n\n### 1. Role of $M_5$ and $M_6$\nThe transistors $M_5$ and $M_6$ are the pull-up PMOS transistors of a cross-coupled inverter pair (forming a regenerative latch). Their job is to pull nodes $X$ and $Y$ up to $V_{DD}$ during the evaluation phase to resolve the output.\n\n### 2. The Trade-off: Drive Strength vs. Capacitance\nWhen you increase the width ($W$) of a MOSFET, two competing effects occur:\n*   **Increased Drive Strength:** A wider transistor has lower on-resistance ($R_{on}$) and higher transconductance ($g_m$), which theoretically allows it to charge the output nodes faster.\n*   **Increased Parasitic Capacitance:** A wider transistor has larger parasitic capacitances, specifically the gate-to-source capacitance ($C_{gs}$) and drain-to-bulk capacitance ($C_{db}$). \n    *   Because the gate of $M_5$ is connected to node $Y$, increasing $W_5$ increases the capacitance at node $Y$.\n    *   Because the gate of $M_6$ is connected to node $X$, increasing $W_6$ increases the capacitance at node $X$.\n\n### 3. Impact on the Time Constant ($\\tau$)\nThe speed of a regenerative latch is determined by the time constant $\\tau$ of the feedback loop, which is approximately:\n$$\\tau \\approx \\frac{C_{node}}{g_m}$$\nIn this circuit, the current is largely limited by the tail transistor $M_7$. For a given current, the transconductance $g_m$ scales with the square root of the width ($\\sqrt{W}$), while the capacitance $C_{node}$ scales linearly with the width ($W$).\n\nTherefore:\n$$\\tau \\propto \\frac{W}{\\sqrt{W}} = \\sqrt{W}$$\n\nAs the width $W$ increases, the time constant $\\tau$ also increases. This means it takes longer for the regenerative loop to \"flip\" and reach a stable state.\n\n### Conclusion\nWhile larger transistors provide more current, the **increase in parasitic capacitance at the critical nodes $X$ and $Y$ outweighs the gain in drive strength**. This results in a slower transition time, meaning the overall speed of the comparator/latch **degrades**.",
        "format": "markdown",
        "sha256": "2e1afaab84b2c13615cbe2db380a293bd717c1f0ccd9e950660d5facdc4e7a9f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies M5/M6 as cross-coupled PMOS devices and recognizes both stronger regeneration and added node capacitance. But it wrongly says capacitance dominates initially: widening them initially improves speed, with degradation only possible beyond an optimum.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 300,
        "output_tokens": 3936,
        "total_tokens": 4236,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3385,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 300,
        "output_tokens": 3936,
        "total_tokens": 4236,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3385,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, increasing the widths of transistors **$M_5$ and $M_6$** will generally **improve the speed** of the circuit.\n\nHere is the detailed explanation:\n\n### 1. Circuit Function\nThe circuit shown is a **dynamic regenerative latch** (often used in sense amplifiers or high-speed flip-flops). The core of the regeneration process is the cross-coupled pair of PMOS transistors ($M_5, M_6$) and NMOS transistors ($M_3, M_4$). \n\nWhen the clock ($CK$) activates $M_7$, the circuit begins to resolve the difference between $V_{in1}$ and $V_{in2}$. The cross-coupled structure creates **positive feedback**: as node $X$ goes high, it turns off $M_6$ and turns on $M_4$, which in turn pulls node $Y$ low, further turning on $M_5$ to pull node $X$ even higher.\n\n### 2. Role of $M_5$ and $M_6$\n$M_5$ and $M_6$ are the **pull-up transistors**. Their job is to charge the parasitic capacitances at nodes $X$ and $Y$ to the supply voltage $V_{DD}$.\n\n### 3. Effect of Increasing Width ($W$)\nIncreasing the width of a MOSFET has two primary effects:\n*   **Increased Current Drive:** A wider transistor has lower on-resistance ($R_{on}$) and higher transconductance ($g_m$). This means $M_5$ and $M_6$ can deliver more current to the output nodes.\n*   **Increased Capacitance:** Increasing the width also increases the parasitic gate and junction capacitances at nodes $X$ and $Y$.\n\n### 4. Why Speed Improves\nIn most practical designs of this type, the increase in **current-driving capability** outweighs the increase in **parasitic capacitance**. \n\nThe time it takes for a node to reach a certain voltage is roughly proportional to $\\frac{C \\cdot \\Delta V}{I}$. By increasing the width of $M_5$ and $M_6$, the current $I$ increases more significantly than the capacitance $C$ for the \"pull-up\" phase of the regeneration. This results in a faster transition from a low state to a high state at the output nodes, thereby **reducing the regeneration time and improving the overall speed** of the latch.",
        "format": "markdown",
        "sha256": "fb578b12221bea26d0d61fdee68baa6e6ce1afb7339fab514bc8bcd19ecd5373"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says widening M5/M6 initially improves speed by strengthening pull-up and regeneration, while recognizing added capacitance. It omits that the capacitance eventually limits the benefit, causing diminishing returns or degradation beyond an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 1600,
        "total_tokens": 1901,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1081,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 301,
        "output_tokens": 1600,
        "total_tokens": 1901,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1081,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the circuit is a **dynamic latch** (often used as a sense amplifier or comparator). \n\nTo determine the effect of increasing the widths of $M_5$ and $M_6$, let's analyze their role in the circuit:\n\n1.  **Function of $M_5$ and $M_6$**: These are PMOS transistors forming a **cross-coupled load**. In a latch, the cross-coupled pair creates a positive feedback loop. Once a small voltage difference is established between nodes $X$ and $Y$, this positive feedback accelerates the process of pulling one node to $V_{DD}$ and the other toward ground.\n2.  **Impact of Width ($W$)**: Increasing the width of a transistor increases its **transconductance ($g_m$)** and its current-driving capability (drive strength). \n3.  **Regeneration Speed**: The speed of a latch is primarily determined by the \"regeneration time,\" which is the time it takes for the positive feedback to drive the outputs to their final rail voltages. The regeneration time $\\tau$ is inversely proportional to the loop gain:\n    $$\\tau \\approx \\frac{C_{load}}{g_m}$$\n    By increasing the widths of $M_5$ and $M_6$, you increase the $g_m$ of the pull-up network. This increases the overall loop gain, which allows the circuit to \"snap\" to the final state more quickly.\n\n**Conclusion:**\nIncreasing the widths of $M_5$ and $M_6$ increases the drive strength and the gain of the positive feedback loop, which reduces the regeneration time. Therefore, the **speed improves**.",
        "format": "markdown",
        "sha256": "1f07dc2946d147ad3743db47cab4390966be4b76931335a936fcf11c91a00922"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that wider M5/M6 strengthen regeneration and initially improve speed, but omits the added-capacitance limitation and resulting optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 300,
        "output_tokens": 2685,
        "total_tokens": 2985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2323,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 300,
        "output_tokens": 2685,
        "total_tokens": 2985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2323,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the **speed improves** if you increase the widths of the clocked transistors.\n\nHere is the detailed explanation:\n\n### 1. Role of the Clocked Transistors\nThe \"clocked transistors\" are those with the $CK$ and $\\overline{CK}$ signals on their gates. These transistors act as the primary switches that charge or discharge the internal nodes $X$ and $Y$. \n* When $CK$ transitions, these transistors turn on or off to pull the nodes $X$ and $Y$ toward $V_{DD}$ or Ground.\n* The time it takes for these nodes to reach their final voltage determines the propagation delay (and thus the speed) of the circuit.\n\n### 2. Effect of Increasing Width ($W$)\nIn MOSFETs, the drain current $I_{ds}$ is proportional to the width-to-length ratio ($W/L$):\n$$I_{ds} \\propto \\frac{W}{L}$$\nIncreasing the width ($W$) of a transistor has two primary effects:\n* **Lower On-Resistance:** A wider transistor has a lower effective resistance ($R_{on}$) when it is turned on.\n* **Higher Current Drive:** It can deliver more current to charge or discharge the parasitic capacitances at nodes $X$ and $Y$.\n\n### 3. Impact on Speed\nThe speed of the circuit is governed by the $RC$ time constant ($\\tau = R \\cdot C$) of the signal paths. \n* By increasing the width of the clocked transistors, you **decrease the resistance ($R$)** of the pull-up and pull-down paths.\n* Even though increasing the width slightly increases the parasitic capacitance ($C$) of the transistor itself, the reduction in resistance typically dominates for the switching speed of the internal nodes.\n* A smaller $RC$ time constant means the nodes $X$ and $Y$ transition between logic levels more quickly, which **improves the overall speed** of the circuit.\n\n**Summary:** Increasing the widths of the clocked transistors increases their current-driving capability and reduces their on-resistance, leading to faster charging/discharging of the internal nodes and an overall improvement in speed.",
        "format": "markdown",
        "sha256": "f1914133e309d2ea5ab8fd0bf65909a74fe436bf68a2f27b412888018e4b541f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says widening the clocked transistors initially improves speed by reducing their on-resistance. It notes their capacitance increases, but does not recognize that this added latch-node capacitance eventually limits or can reverse the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 1606,
        "total_tokens": 1901,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1146,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 1606,
        "total_tokens": 1901,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1146,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit provided, increasing the widths of the clocked transistors (those with the $CK$ and $\\overline{CK}$ inputs) will generally **improve the speed** of the circuit (up to a certain point of diminishing returns).\n\nHere is the detailed technical explanation:\n\n### 1. Understanding the Circuit\nThe circuit shown is a clocked logic structure (similar to a **True Single Phase Clock (TSPC)** flip-flop or a clocked inverter chain). In this design, the \"clocked transistors\" act as switches that enable or disable the paths to $V_{DD}$ (pull-up) and Ground (pull-down) for the internal nodes $X$ and $Y$.\n\n### 2. The Trade-off: Resistance vs. Capacitance\nWhen you increase the width ($W$) of a transistor, two primary things happen:\n*   **Resistance Decreases:** The on-resistance ($R_{on}$) of the transistor is inversely proportional to its width ($R \\propto 1/W$). Since the clocked transistors are in series with the \"data\" transistors (the ones driven by $Z$ or $X$), they contribute significantly to the total resistance of the charging/discharging paths.\n*   **Capacitance Increases:** The parasitic capacitance (specifically the drain/source capacitance) at nodes $X$ and $Y$ increases linearly with the width ($C \\propto W$).\n\n### 3. Why Speed Improves\nThe speed of the circuit is determined by the time constant $\\tau = R_{total} \\cdot C_{total}$ at the internal nodes $X$ and $Y$.\n\n*   **The Resistance Effect:** Because the clocked transistors are in series, the total resistance is the sum of the data transistor and the clock transistor ($R_{total} = R_{data} + R_{clock}$). Reducing $R_{clock}$ by increasing the width directly reduces the total resistance of the path.\n*   **The Capacitance Effect:** While increasing the width increases the parasitic capacitance of the clocked transistor, this is usually small compared to the total load capacitance at the node (which includes the gate capacitances of the transistors in the subsequent stage).\n\nMathematically, the change in delay $\\tau$ with respect to width $W$ is roughly proportional to $(R_{data} \\cdot C_{clock} - R_{clock} \\cdot C_{load})$. In most practical designs, the load capacitance ($C_{load}$) is significantly larger than the individual transistor's parasitic capacitance. Therefore, the benefit of reducing the series resistance ($R_{clock}$) outweighs the penalty of adding a small amount of extra capacitance.\n\n### Conclusion\nIncreasing the widths of the clocked transistors reduces the RC time constant of the internal nodes $X$ and $Y$, allowing them to transition between logic levels more quickly. Therefore, the **speed improves**.",
        "format": "markdown",
        "sha256": "426ef7b07b70a4856d3462e6a99da1f7e7adc1e6aef6ecf66944f451e3b20f0d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly says widening initially improves speed by reducing clocked-device on-resistance, and recognizes that added capacitance at X and Y limits the benefit, consistent with diminishing returns.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 3826,
        "total_tokens": 4120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3233,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 3826,
        "total_tokens": 4120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3233,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the provided circuit, increasing the widths of the clocked transistors will generally **improve the speed** of the circuit (up to a certain optimal point).\n\nHere is the detailed technical explanation:\n\n### 1. Identification of the Circuit\nThe circuit shown is a **dynamic latch** (similar to a C-element or a part of a TSPC flip-flop). It uses a regenerative feedback loop where the output $Z$ controls the footer transistors $M_1$ and the pull-up PMOS transistors. The \"clocked transistors\" are the NMOS transistors controlled by $CK$ and $\\overline{CK}$.\n\n### 2. Effect on Resistance ($R$)\nThe speed of a digital circuit is primarily determined by the time it takes to charge or discharge the parasitic capacitances at the internal nodes (nodes $X$ and $Y$). The time constant is given by $\\tau = R \\cdot C$.\n*   The clocked transistors are part of the pull-down path to ground.\n*   The on-resistance ($R_{on}$) of a MOSFET is inversely proportional to its width ($W$): $R_{on} \\propto \\frac{1}{W}$.\n*   **Increasing the width** of these transistors **decreases their resistance**, allowing the nodes $X$ and $Y$ to discharge to ground more quickly.\n\n### 3. Effect on Capacitance ($C$)\nIncreasing the width of a transistor also increases its parasitic capacitances (gate capacitance $C_g$ and junction capacitances $C_{db}, C_{sb}$), as $C \\propto W$.\n*   This increases the total capacitance at nodes $X$ and $Y$.\n*   However, in most dynamic circuits, the reduction in resistance ($R$) has a more significant impact on the discharge speed than the increase in self-capacitance, especially when there are other load capacitances present.\n\n### 4. Effect on Regeneration Speed\nThis circuit relies on a regenerative process (positive feedback). The speed at which the circuit \"latches\" into a state depends on the **transconductance ($g_m$)** of the transistors in the loop.\n*   Since $g_m$ increases with the width of the transistor ($g_m \\propto \\sqrt{W/L}$ in saturation or $g_m \\propto W/L$ in linear), wider transistors increase the gain of the feedback loop.\n*   A higher gain leads to a **faster regeneration time**, meaning the circuit reaches its final logic state more quickly.\n\n### Summary\nWhile increasing the width too much will eventually lead to diminishing returns (as the parasitic capacitance begins to dominate and the load on the clock driver increases), the primary effect of increasing the width of the clocked transistors in this topology is to **reduce the pull-down resistance and increase the transconductance**, thereby **improving the overall speed** of the circuit.",
        "format": "markdown",
        "sha256": "cc6934b859a509086d2760be6d880259cabfbf213e1823c1569654acf715fdb3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the correct speed-up trend and notes the capacitance penalty, but misidentifies the C2MOS divider and describes the clocked devices as NMOS pull-down/footer devices rather than the clocked devices in the latch supply paths. The golden solution caps answers with this topology misread at 1.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 6840,
        "total_tokens": 7134,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6234,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 294,
        "output_tokens": 6840,
        "total_tokens": 7134,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6234,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on an analysis of the circuit diagram provided, the answer is **no**, this structure does not provide quadrature outputs.\n\n### Analysis:\n\n1.  **Quadrature Outputs Defined:** Quadrature outputs are a set of signals that are phase-shifted by $90^\\circ$ relative to each other (e.g., $0^\\circ, 90^\\circ, 180^\\circ, 270^\\circ$).\n2.  **Input Signals:** The circuit takes a differential clock pair as input: $CK$ and $\\overline{CK}$. By definition, these two signals are $180^\\circ$ out of phase.\n3.  **Circuit Operation:**\n    *   **Left Stage:** The output $X$ is driven by $CK$ and $\\overline{CK}$. When $CK$ is high and $\\overline{CK}$ is low, $X$ will be driven high. When $CK$ is low and $\\overline{CK}$ is high, $X$ will be driven low. Thus, $X$ is essentially in phase with $CK$.\n    *   **Right Stage:** The output $Y$ is driven by the same signals but with the inputs swapped. When $CK$ is high, $Y$ is driven low; when $CK$ is low, $Y$ is driven high. Thus, $Y$ is in phase with $\\overline{CK}$ (or $180^\\circ$ out of phase with $CK$).\n    *   **Final Stage:** The signal $Z$ is the output of an inverter ($Inv_3$) connected to $Y$. Since $Y$ is the inverse of $CK$, $Z$ becomes the inverse of the inverse, meaning $Z$ is in phase with $CK$.\n4.  **Conclusion:** The outputs $X$ and $Z$ are in phase with each other, and $Y$ is $180^\\circ$ out of phase with them. There is no mechanism in this circuit (such as cross-coupling or RC delay elements) to create the $90^\\circ$ phase shift required for quadrature outputs.\n\nThis circuit is a **differential-to-single-ended converter** or a clock buffer, not a quadrature generator.",
        "format": "markdown",
        "sha256": "11ec35f364891882cbd1a644cefa7dc7928568a46545f21b295277b6cf154f88"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly treats the circuit as a clock buffer rather than a C2MOS divide-by-two, missing that the opposite-phase latches produce nominal quadrature outputs. Its conclusion is wrong for the wrong reason.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 562,
        "output_tokens": 18737,
        "total_tokens": 19299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18264,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 281,
        "output_tokens": 2353,
        "total_tokens": 2634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1881,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on an analysis of the circuit diagram, the answer is **no**, this structure does not provide quadrature outputs.\n\nHere is the detailed reasoning:\n\n1.  **Input Signals:** The circuit takes a differential clock pair as input: $CK$ and $\\overline{CK}$. These two signals are $180^\\circ$ out of phase with each other.\n2.  **Operation of the Stages:**\n    *   **First Stage (Output $X$):** When $CK$ is high and $\\overline{CK}$ is low, the bottom NMOS is ON and the top NMOS is OFF, pulling $X$ low. When $CK$ is low and $\\overline{CK}$ is high, the top NMOS is ON and the bottom is OFF, pulling $X$ high. Thus, $X$ follows the signal $\\overline{CK}$.\n    *   **Second Stage (Output $Y$):** This stage has the inputs swapped. When $CK$ is high, the top NMOS is ON, pulling $Y$ high (via the PMOS load). When $CK$ is low, the bottom NMOS is ON, pulling $Y$ low. Thus, $Y$ follows the signal $CK$.\n    *   **Inverter (Output $Z$):** The inverter $Inv_3$ simply flips the signal $Y$. Since $Y$ follows $CK$, $Z$ will follow $\\overline{CK}$.\n3.  **Phase Relationship:**\n    *   $X$ and $Y$ are complementary signals, meaning they are **$180^\\circ$ out of phase** (anti-phase).\n    *   $Z$ is the inverse of $Y$, making it in phase with $X$.\n4.  **Quadrature Definition:** Quadrature outputs are signals that are shifted by **$90^\\circ$** relative to each other (e.g., $0^\\circ, 90^\\circ, 180^\\circ, 270^\\circ$). \n\nSince this circuit only produces signals that are either in phase or $180^\\circ$ out of phase, it is a **differential-to-single-ended converter** (or a complementary signal generator), not a quadrature generator. There are no delay elements (like capacitors or specific RC networks) that would introduce the necessary $90^\\circ$ phase shift.",
        "format": "markdown",
        "sha256": "0f04b5341c19e40d352a5a998d728704db32453ed0c7fdaad52e94b477e784d9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misses the C2MOS divide-by-two operation and incorrectly treats the outputs as direct clock complements. It therefore rejects the nominal quadrature produced by the latches switching on opposite clock edges; recognizing that quadrature means a 90° phase shift earns only minimal credit.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 281,
        "output_tokens": 1550,
        "total_tokens": 1831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1045,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 281,
        "output_tokens": 1550,
        "total_tokens": 1831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1045,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit topology, the answer is **yes**, this structure provides quadrature outputs.\n\n### Analysis of the Circuit:\nThe circuit shown is a common CMOS implementation of a **quadrature clock generator** (or a divide-by-2 circuit with quadrature outputs). Here is how it works:\n\n1.  **Structure**: The circuit consists of two stages that act as modified flip-flops or state elements. It uses a differential input clock ($CK$ and $\\overline{CK}$) to drive the transitions.\n2.  **Feedback Loops**: \n    *   The output $X$ of the first stage is fed back to the gate of the bottom NMOS transistor ($M_1$) of the second stage.\n    *   The output $Z$ (which is the inverted version of $Y$ via $Inv_3$) is fed back to the gates of the top PMOS transistors and the bottom NMOS transistor ($M_1$) of the first stage.\n3.  **Operation**: This cross-coupled feedback mechanism ensures that the outputs $X$ and $Y$ follow a **Gray code sequence** (e.g., $(0,0) \\rightarrow (1,0) \\rightarrow (1,1) \\rightarrow (0,1) \\rightarrow (0,0) \\dots$). \n4.  **Quadrature Result**: Because the outputs transition one after the other in a cyclic manner, the resulting waveforms for $X$ and $Y$ are square waves with the same frequency (half the frequency of the input $CK$) but shifted by **$90^\\circ$ (one quarter-cycle)** relative to each other.\n\nTherefore, the outputs $X$ and $Y$ (or $X$ and $Z$) are **quadrature signals**.",
        "format": "markdown",
        "sha256": "e2ed773fe811308d1bbb4b5f30df5dfdb993785b7d6a2288a91dad27b1409390"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the nominal divide-by-two quadrature relationship, but omits both reasons the outputs are not exactly in quadrature: Inv3 delay and unequal loading of the latch outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 281,
        "output_tokens": 3723,
        "total_tokens": 4004,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 281,
        "output_tokens": 3723,
        "total_tokens": 4004,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the speed of the circuit will **improve** if you increase the widths of the clocked transistors.\n\nHere is the detailed explanation:\n\n### 1. Role of the Clocked Transistors\nThe transistors controlled by $CK$ and $\\overline{CK}$ (the top PMOS and bottom NMOS transistors) act as \"switches\" that enable the precharge and evaluation phases of this dynamic latch. They control the paths from the power supply ($V_{DD}$) and ground (GND) to the internal nodes of the circuit.\n\n### 2. Impact of Increasing Width ($W$)\nIn MOSFETs, the on-resistance ($R_{on}$) is inversely proportional to the width of the transistor:\n$$R_{on} \\propto \\frac{1}{W}$$\nBy increasing the width of these clocked transistors, you **decrease their on-resistance**.\n\n### 3. Effect on Speed (Time Constant)\nThe speed of a dynamic circuit is primarily determined by the time it takes to charge or discharge the internal node capacitances ($C_{node}$). The time constant $\\tau$ for these transitions is:\n$$\\tau = R_{on} \\times C_{node}$$\n*   **Decreasing $R_{on}$:** By increasing the width, $R_{on}$ decreases, which directly reduces the time constant $\\tau$.\n*   **Capacitance Trade-off:** While increasing the width also slightly increases the parasitic diffusion capacitance of the transistor itself, the reduction in resistance typically has a much more significant positive impact on the charging/discharging speed of the node.\n\n### Conclusion\nBecause the internal nodes can be charged to $V_{DD}$ or discharged to ground more quickly with lower-resistance paths, the transition times are reduced. Therefore, the overall **speed of the circuit improves**.",
        "format": "markdown",
        "sha256": "538efff9668ca2453fd8a58768d5754680c0df67a48a91c0a6578ff953c5b78c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that speed improves and cites reduced on-resistance from wider clocked devices. It omits the charge-sharing effect that degrades swing and limits the benefit, so it does not earn full credit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 312,
        "output_tokens": 2262,
        "total_tokens": 2574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 312,
        "output_tokens": 2262,
        "total_tokens": 2574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, which is a **dynamic latch**, increasing the widths of the clocked transistors (the ones gated by $CK$ and $\\overline{CK}$) will generally **degrade** the speed of the circuit.\n\nHere is the detailed reasoning:\n\n### 1. Understanding the Circuit\nThe circuit consists of two dynamic stages. The \"clocked transistors\" are the PMOS and NMOS transistors at the top and bottom of each stage that act as switches to connect the internal nodes to $V_{DD}$ and Ground. The internal nodes (the points between the clocked transistors and the inverters) are **dynamic nodes**, meaning they store charge when the clock disables the paths to the power rails.\n\n### 2. The Trade-off of Increasing Width ($W$)\nWhen you increase the width of a transistor, two primary things happen:\n*   **Resistance Decreases:** The on-resistance ($R_{on}$) of the transistor decreases. This would theoretically allow the internal nodes to charge or discharge faster, which would **improve** speed.\n*   **Capacitance Increases:** The parasitic capacitance (specifically the drain-to-bulk and gate capacitance) increases. Because these transistors are connected to the internal dynamic nodes, increasing their width increases the total capacitance ($C_{node}$) of those nodes.\n\n### 3. Why Speed Degrades\nThe speed of a dynamic circuit is determined by the time constant $\\tau = R_{total} \\cdot C_{node}$.\n*   **The Resistance Bottleneck:** In a well-designed circuit, the clocked transistors are already sized to be \"large enough\" so that they are not the primary bottleneck. The total resistance $R_{total}$ is the sum of the clocked transistor's resistance and the inverter's resistance ($R_{total} = R_{clocked} + R_{inverter}$). Once $R_{clocked}$ is significantly smaller than $R_{inverter}$, further increasing the width of the clocked transistor provides negligible reduction in total resistance.\n*   **The Capacitance Bottleneck:** While the resistance reduction diminishes, the capacitance $C_{node}$ continues to increase linearly with the width. Since the internal node must be charged or discharged to change state, a larger $C_{node}$ directly increases the time required for these transitions.\n*   **Clock Load:** Additionally, increasing the width of these transistors increases the total gate capacitance seen by the clock driver. This can slow down the clock signal's transition edges, further degrading the overall speed of the system.\n\n### Conclusion\nBecause the increase in parasitic capacitance on the dynamic nodes and the increased load on the clock driver outweigh the diminishing returns of reduced on-resistance, increasing the widths of the clocked transistors will **degrade** the speed of the circuit.",
        "format": "markdown",
        "sha256": "ed16a5b6217229f9aef5a4fd7359ac73beafa4b318afbeaba071be173850ff6d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that widening the clocked transistors degrades speed, contrary to the key result: their lower on-resistance improves speed while their added capacitance largely stays off the data path; charge sharing limits swing but is acceptable up to a point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 313,
        "output_tokens": 5027,
        "total_tokens": 5340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 313,
        "output_tokens": 5027,
        "total_tokens": 5340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit provided, increasing the widths of the clocked transistors will generally **degrade** the speed of the circuit.\n\nHere is the detailed technical explanation:\n\n### 1. Circuit Identification\nThe circuit shown is a **C²MOS (Clocked CMOS) ring oscillator**. It consists of two dynamic stages followed by an inverter, with the output fed back to the input. The \"clocked transistors\" are the precharge PMOS transistors (connected to $V_{DD}$) and the footer NMOS transistors (connected to ground) that are controlled by $CK$ and $\\overline{CK}$.\n\n### 2. The Trade-off: Resistance vs. Capacitance\nWhen you increase the width ($W$) of a transistor, two primary physical effects occur:\n*   **Resistance Decreases:** The on-resistance ($R_{on}$) of the transistor decreases ($R \\propto 1/W$). This allows current to flow more easily, which tends to speed up the charging and discharging of nodes.\n*   **Capacitance Increases:** The parasitic capacitances—specifically the gate-to-source/drain capacitance ($C_{gs}, C_{gd}$) and the junction capacitance at the drain/source—increase linearly with the width ($C \\propto W$).\n\n### 3. Impact on the Critical Path\nThe speed of this circuit is determined by the time it takes to charge and discharge the **internal nodes** (the nodes between the clocked transistors and the inverters).\n\nThe delay ($\\tau$) of these nodes can be approximated as:\n$$\\tau \\approx R_{total} \\cdot C_{total}$$\n\n*   **Total Resistance ($R_{total}$):** The clocked transistor is in series with the transistors of the internal inverter. Therefore, $R_{total} = R_{clocked} + R_{inverter}$. While increasing the width of the clocked transistor reduces $R_{clocked}$, the total resistance is still limited by the constant resistance of the inverter transistors ($R_{inverter}$).\n*   **Total Capacitance ($C_{total}$):** The internal node capacitance includes the drain capacitance of the precharge PMOS and the source capacitance of the footer NMOS. Increasing the width of these clocked transistors directly increases $C_{total}$.\n\n### 4. Conclusion\nBecause the reduction in total resistance has **diminishing returns** (since $R_{inverter}$ remains constant), but the increase in capacitance is **linear and continuous**, the increase in capacitance eventually dominates. \n\nFurthermore, increasing the widths of these transistors increases the **load capacitance on the clock signal** itself, which can slow down the clock transitions, further degrading the overall performance.\n\nTherefore, beyond an optimal sizing point, increasing the widths of the clocked transistors increases the RC time constant of the internal nodes, leading to a **degradation in speed**.",
        "format": "markdown",
        "sha256": "6d27db5c9313eed7e384a95978c0f9b2d16043decb7cf2e34dad72fc0fddaf3e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that widening the clocked transistors degrades speed, contrary to the golden result that speed improves considerably because their added capacitance is largely outside the data path. It also omits charge sharing as the acceptable swing-degradation limit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 312,
        "output_tokens": 3000,
        "total_tokens": 3312,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2408,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 312,
        "output_tokens": 3000,
        "total_tokens": 3312,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2408,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided figure, here is a detailed analysis of the arrangement:\n\n### 1. Circuit Components\nThe circuit consists of the following elements:\n*   **Three Inverters (NOT gates):** These are the triangular symbols with a circle at the output.\n*   **Two Switches:** These are used to open or close the signal path.\n*   **A Feedback Loop:** The output of the final inverter is connected back to the input of the first switch, creating a closed loop.\n\n### 2. Functional Analysis\nThis arrangement is a classic **Ring Oscillator**. \n\n*   **Odd Number of Inversions:** A ring oscillator requires an odd number of inverting stages to function. In this circuit, there are three inverters.\n*   **Oscillation Mechanism:** \n    *   If the input to the first inverter ($\\text{Inv}_1$) is a logic **LOW (0)**, its output ($\\overline{CK}$) becomes **HIGH (1)**.\n    *   This **HIGH (1)** signal passes through the second inverter to become **LOW (0)**.\n    *   The **LOW (0)** signal passes through the third inverter to become **HIGH (1)**.\n    *   This **HIGH (1)** signal is then fed back to the input of the first inverter.\n    *   Now that the input is **HIGH (1)**, the first inverter's output becomes **LOW (0)**, and the cycle repeats.\n*   **Result:** Because the signal never reaches a stable state, the circuit continuously oscillates between logic 0 and 1, creating a square-wave clock signal.\n\n### 3. Role of the Switches\nThe switches act as control mechanisms for the oscillator:\n*   **Open Switches:** When the switches are open, the feedback loop is broken, and the circuit remains static (inactive).\n*   **Closed Switches:** When the switches are closed, the loop is completed, and the circuit begins to oscillate.\n\n### 4. Key Characteristics\n*   **Frequency:** The frequency of the resulting clock signal ($CK$) is determined by the propagation delay of the inverters. The total period is roughly twice the sum of the delays of all three inverters ($T \\approx 2 \\times 3 \\times t_{pd}$).\n*   **Application:** Such circuits are commonly used in electronics to generate clock signals or to measure the process speed of integrated circuits (IC) by measuring the oscillation frequency.\n\n**Summary:** The figure represents a **3-stage Ring Oscillator** with switches used to enable or disable the oscillation.",
        "format": "markdown",
        "sha256": "79acb034f4a10bded1d956a14475228ff77ea63618838036719d1bd10fe7dd83"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a ring oscillator. The figure is a divide-by-two circuit built from dynamic latches, so the central function and topology are wrong.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 1374,
        "total_tokens": 1666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 292,
        "output_tokens": 1374,
        "total_tokens": 1666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided figure, here is a detailed analysis of the arrangement:\n\n### 1. Identification of the Circuit\nThe figure depicts a **3-stage ring oscillator**. A ring oscillator is a device consisting of an odd number of NOT gates (inverters) connected in a loop.\n\n### 2. Component Analysis\n*   **Inverters ($\\text{Inv}_1$, and two others):** There are three inverters in total. In digital electronics, an inverter flips a logic signal (0 becomes 1, and 1 becomes 0).\n*   **Feedback Loop:** The output of the third inverter is connected back to the input of the first inverter, creating a closed loop.\n*   **Switches:** There are two switches in the path. These are typically used to enable or disable the oscillation. If either switch is open, the feedback loop is broken, and the circuit will not oscillate.\n*   **Labels ($CK$ and $\\overline{CK}$):** These labels represent the clock signal and its complement. \n    *   The signal after the first switch is labeled **$CK$**.\n    *   After passing through $\\text{Inv}_1$, the signal becomes **$\\overline{CK}$** (the inverse of $CK$), which is consistent with the labeling.\n\n### 3. How it Works (Principle of Operation)\nFor a circuit to oscillate, it must be unstable. In a ring oscillator, this instability is achieved by having an **odd number of inversions** in the loop:\n1.  Assume the signal at the first switch is **Low (0)**.\n2.  $\\text{Inv}_1$ turns it into **High (1)**.\n3.  The second inverter turns it back to **Low (0)**.\n4.  The third inverter turns it back to **High (1)**.\n5.  This **High (1)** signal is fed back to the start, replacing the original **Low (0)**.\n6.  The process then repeats in reverse: High $\\rightarrow$ Low $\\rightarrow$ High $\\rightarrow$ Low $\\rightarrow$ High...\n\nBecause the signal is constantly \"chasing\" its own inverse, the circuit oscillates between logic 0 and 1 indefinitely.\n\n### 4. Key Characteristics\n*   **Oscillation Frequency:** The frequency of the resulting square wave depends on the propagation delay ($t_{pd}$) of the inverters. The formula for the frequency ($f$) is:\n    $$f = \\frac{1}{2 \\cdot N \\cdot t_{pd}}$$\n    where $N$ is the number of inverters (in this case, $N=3$).\n*   **Purpose:** Ring oscillators are commonly used in integrated circuits as clock sources, for generating delays, or as sensors to measure temperature and voltage variations (since $t_{pd}$ changes with these factors).",
        "format": "markdown",
        "sha256": "874b06a4e06ebb057c27957fb64323b6cb43d93061c7c644875c644c45ebb7cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the dynamic-latch divide-by-two circuit as a three-inverter ring oscillator, so it misses the essential topology and function.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 291,
        "output_tokens": 4015,
        "total_tokens": 4306,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3406,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 291,
        "output_tokens": 4015,
        "total_tokens": 4306,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3406,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided figure, here is a detailed analysis of the circuit arrangement:\n\n### 1. Circuit Components\nThe circuit consists of the following elements:\n*   **Three Inverters:** These are NOT gates. The first one is explicitly labeled $\\text{Inv}_1$.\n*   **Two Switches:** These act as control mechanisms to enable or disable the signal path.\n*   **Feedback Loop:** The output of the final (third) inverter is connected back to the input of the first switch, creating a closed loop.\n*   **Signals:** $CK$ represents the clock signal, and $\\overline{CK}$ represents its complement (inverted signal).\n\n### 2. Operational Analysis\nThe behavior of the circuit depends entirely on the state of the two switches:\n\n#### A. Both Switches Closed (Oscillation Mode)\nWhen both switches are closed, the circuit forms a **Ring Oscillator**. \n*   **Mechanism:** A ring oscillator consists of an odd number of inverters connected in a loop. Because there are three inverters (an odd number), the circuit can never reach a stable state. If the input is '0', it becomes '1' after the first inverter, '0' after the second, and '1' after the third. This '1' is then fed back to the start, flipping the cycle again.\n*   **Result:** The circuit will oscillate continuously between logic high (1) and logic low (0).\n*   **Frequency:** The frequency of oscillation is determined by the propagation delay ($\\tau$) of the inverters. The period $T$ is twice the total delay of the loop:\n    $$T = 2 \\times (\\tau_{\\text{Inv1}} + \\tau_{\\text{Inv2}} + \\tau_{\\text{Inv3}})$$\n    $$f = \\frac{1}{2 \\sum \\tau}$$\n\n#### B. One or Both Switches Open (Stable/Off Mode)\nIf either switch (or both) is open, the feedback loop is broken.\n*   **First switch open:** The feedback from the third inverter cannot reach the first inverter. The circuit remains static.\n*   **Second switch open:** The signal from $\\text{Inv}_1$ cannot reach the subsequent inverters. The loop is broken, and oscillation stops.\n*   **Both open:** The circuit is completely disconnected.\n\n### 3. Summary of the Arrangement\nThis arrangement is a **controllable 3-stage ring oscillator**. \n\n*   **Purpose:** Such circuits are commonly used in integrated circuit (IC) design as **on-chip clock generators** or as **test structures** to measure the propagation delay of logic gates. By measuring the frequency of oscillation, engineers can calculate the exact speed of the inverters used in the manufacturing process.\n*   **Signal Points:** The labels $CK$ and $\\overline{CK}$ indicate that the circuit provides both the clock signal and its inverse, which is useful for driving differential logic or flip-flops.",
        "format": "markdown",
        "sha256": "9570829b05a3096f4ebed44348bdcb9c3e0ff99dca90885c1e907d3c71a546ab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is a dynamic-latch divide-by-two, not a controllable ring oscillator. The answer misses the intended sampling/holding operation and incorrectly describes the switches and clock signals.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 291,
        "output_tokens": 1449,
        "total_tokens": 1740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 817,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 291,
        "output_tokens": 1449,
        "total_tokens": 1740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 817,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, the red inverter is connected in **parallel** with the inverter labeled $\\text{Inv}_1$. This configuration is a common technique used to \"size up\" a logic gate.\n\nHere is how this affects the performance of the circuit (which is a ring oscillator):\n\n### 1. Increased Drive Strength\nBy adding a second inverter in parallel, the total current-sourcing and current-sinking capability of that stage is increased. This means the stage can charge and discharge the load capacitance at its output more quickly.\n\n### 2. Effect on Propagation Delay ($\\tau$)\nThe overall performance of a ring oscillator is determined by the total propagation delay around the loop. Adding the red inverter creates a trade-off:\n*   **Decrease in Stage 1 Delay:** Because the drive strength is higher, the propagation delay of the first stage ($\\tau_{p1}$) **decreases**. The output signal will have a faster transition (sharper edges/higher slew rate).\n*   **Increase in Preceding Stage Delay:** The red inverter adds additional input capacitance to the circuit. The third inverter in the ring (which drives the input of $\\text{Inv}_1$) now has a larger load to drive. Consequently, the propagation delay of the third stage ($\\tau_{p3}$) **increases**.\n\n### 3. Overall Oscillation Frequency\nIn a balanced ring oscillator (where all inverters are of similar size), the increase in the preceding stage's delay typically outweighs the decrease in the current stage's delay. \n*   **Net Result:** The total loop delay increases, which leads to a **decrease in the oscillation frequency**.\n*   *Exception:* If the load at the output of $\\text{Inv}_1$ was exceptionally large (e.g., driving a large external capacitor), adding the red inverter would significantly reduce the dominant delay and could actually **increase** the frequency.\n\n### 4. Other Performance Metrics\n*   **Power Consumption:** The total power consumption increases because there are more transistors switching and more total capacitance to charge/discharge.\n*   **Area:** The physical area of the circuit increases due to the additional transistors.\n*   **Signal Integrity:** The faster transition times at the output of $\\text{Inv}_1$ can reduce the impact of noise and jitter on that specific signal transition.\n\n### Summary Table\n| Parameter | Effect of Red Inverter | Reason |\n| :--- | :--- | :--- |\n| **Drive Strength** | $\\uparrow$ Increase | More current available to drive the load. |\n| **$\\text{Inv}_1$ Delay** | $\\downarrow$ Decrease | Faster charging/discharging of the next stage. |\n| **Previous Stage Delay** | $\\uparrow$ Increase | Higher input capacitance load. |\n| **Oscillation Frequency** | $\\downarrow$ Decrease (usually) | Net increase in total loop propagation delay. |\n| **Power Consumption** | $\\uparrow$ Increase | More transistors and capacitance switching. |",
        "format": "markdown",
        "sha256": "a502f04d835b8ee696839c9df9c6457373ecb26a3c268cc5e7ce0676ac264ca2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as a parallel sizing element in a ring oscillator. The key effect is a feedforward path that bypasses part of the first latch, speeding high-frequency operation while raising the minimum usable clock frequency at low rates; the answer captures neither tradeoff.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 291,
        "output_tokens": 5170,
        "total_tokens": 5461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 291,
        "output_tokens": 5170,
        "total_tokens": 5461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the red inverter creates a **positive feedback loop** (since two inverters in a loop act as a non-inverting buffer or a latch) in parallel with the main ring oscillator.\n\nHere is how this red inverter affects the performance of the circuit:\n\n### 1. Ensures Self-Starting (Startup)\nIn a perfectly balanced ring oscillator (an odd number of inverters), it is theoretically possible for the circuit to enter a **metastable state** where all nodes sit at approximately half the supply voltage ($V_{DD}/2$). In such a case, the oscillator would not start. The red inverter breaks this symmetry and provides a \"kick\" that forces the circuit to snap into a logic state, ensuring the oscillator starts reliably upon power-up.\n\n### 2. Adds Hysteresis and Noise Immunity\nThe red inverter creates a latching effect. For the state of $\\text{Inv}_1$ to change, the signal coming from the rest of the ring must be strong enough to overcome the positive feedback provided by the red inverter. This introduces **hysteresis**, which makes the oscillator much less sensitive to small noise fluctuations on the signal lines, preventing \"glitches\" or premature switching.\n\n### 3. Improves Waveform Quality (Sharper Edges)\nBecause of the positive feedback, once the switching threshold is reached, the transition happens very rapidly (a \"snap\" action). This increases the effective **slew rate** of the signal, resulting in a more \"square\" waveform with sharper rising and falling edges compared to a simple ring of inverters.\n\n### 4. Impact on Frequency\nThe red inverter will slightly affect the oscillation frequency in two ways:\n*   **Capacitive Loading:** It adds extra input capacitance to the node before the CK switch, which typically **decreases the frequency** slightly.\n*   **Switching Delay:** Because the circuit must overcome the hysteresis (the \"latch\" must be broken) to switch states, the propagation delay is slightly increased, further **lowering the frequency**.\n\n### Summary Table\n| Performance Metric | Effect of Red Inverter | Why? |\n| :--- | :--- | :--- |\n| **Startup Reliability** | $\\uparrow$ Increased | Prevents metastable $V_{DD}/2$ states. |\n| **Noise Immunity** | $\\uparrow$ Increased | Adds hysteresis to the switching threshold. |\n| **Edge Sharpness** | $\\uparrow$ Improved | Positive feedback accelerates transitions. |\n| **Frequency** | $\\downarrow$ Slightly Decreased | Added capacitive load and switching overhead. |",
        "format": "markdown",
        "sha256": "9a473b022c33a43270b52bc37648194c6bb51460d97dba7d69484edaf4850670"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a startup aid and hysteretic latch in a ring oscillator, rather than a feedforward path that bypasses part of the first latch and improves high-speed operation. It also misses the key low-frequency drawback: the unclocked branch can corrupt division and raise the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 291,
        "output_tokens": 3711,
        "total_tokens": 4002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3170,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 291,
        "output_tokens": 3711,
        "total_tokens": 4002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3170,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, the red inverter is connected in **parallel** with the combination of the switch $CK$ and the inverter $Inv_1$. \n\nHere is a detailed breakdown of how it affects the performance of the circuit (which is a ring oscillator):\n\n### 1. Increase in Drive Strength\nIn digital CMOS circuits, placing two inverters in parallel effectively increases the total width ($W$) of the transistors. Since the current-driving capability of a MOSFET is proportional to its width, the red inverter increases the total transconductance ($g_m$) of that stage.\n\n### 2. Reduction in Propagation Delay\nThe propagation delay ($t_{pd}$) of a logic gate is roughly proportional to the time it takes to charge or discharge the load capacitance ($C_L$):\n$$t_{pd} \\approx \\frac{C_L \\cdot \\Delta V}{I_{avg}}$$\nBy adding the red inverter in parallel, the average current ($I_{avg}$) sourcing and sinking the output node increases. This allows the output node to transition between logic levels faster, thereby **reducing the propagation delay** of that specific stage.\n\n### 3. Increase in Oscillation Frequency\nThe frequency ($f$) of a ring oscillator is inversely proportional to the sum of the propagation delays of all the stages in the loop:\n$$f = \\frac{1}{2 \\cdot \\sum t_{pd}}$$\nBecause the red inverter reduces the delay of the first stage, the total loop delay decreases, which **increases the overall oscillation frequency** of the circuit.\n\n### 4. Tuning Capability (The role of switch $CK$)\nThe presence of the switch $CK$ suggests that this circuit is designed for **performance tuning**:\n*   **When $CK$ is open:** Only the red inverter is active. The circuit oscillates at a baseline frequency.\n*   **When $CK$ is closed:** Both the red inverter and $Inv_1$ are active. The drive strength is increased, and the oscillation frequency rises.\n\n### Summary\nThe red inverter **improves the speed (performance)** of the circuit by increasing the drive strength of the first stage, which reduces the propagation delay and **increases the oscillation frequency**.",
        "format": "markdown",
        "sha256": "fc2d5ba7c3feac089ae58067f575ed8f93769d3e9fe60f57de4c43e98fff0225"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that the red inverter can speed up a signal path, but miscasts it as parallel drive-strength enhancement in a ring oscillator. It misses the key low-frequency drawback: the unclocked feedforward branch can overpower the latch and raise the divider’s minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 291,
        "output_tokens": 1749,
        "total_tokens": 2040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1287,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 291,
        "output_tokens": 1749,
        "total_tokens": 2040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1287,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "I **agree** with the answer provided. The statement is technically accurate and describes a common technique used in dynamic circuit design.\n\nHere is a detailed breakdown of why this is correct and what the actual role of the red inverter is.\n\n### 1. The Problem: The \"Floating Node\"\nTo understand the red inverter, look at the input to $\\text{Inv}_1$. This node is connected to the clock signal $CK$ via a switch.\n\n*   **When the $CK$ switch is closed:** The node is strongly driven to either '0' or '1' by the clock source.\n*   **When the $CK$ switch is open:** The node becomes **high-impedance (floating)**. \n\nIn an ideal world, a floating node holds its voltage forever. In the real world, **leakage currents** (subthreshold leakage, gate leakage, etc.) will slowly discharge or charge that node. If the clock period is very long (low frequency), the leakage has enough time to flip the logic state of the node or pull it to an indeterminate voltage. This creates a **minimum clock frequency requirement**; if you run the clock too slowly, the circuit fails because the \"memory\" of the node leaks away.\n\n### 2. The Solution: The Red Inverter as a \"Keeper\"\nThe red inverter is connected in a feedback loop with $\\text{Inv}_1$. Together, they form a **cross-coupled latch** (two inverters facing each other).\n\n*   **During the \"Drive\" phase:** When the $CK$ switch is closed, the clock signal overrides the red inverter and forces the input of $\\text{Inv}_1$ to the desired state.\n*   **During the \"Hold\" phase:** When the $CK$ switch opens, the node is no longer driven by the clock. However, it is now driven by the output of the red inverter. \n\nBecause the red inverter's input is the output of $\\text{Inv}_1$, and its output is the input of $\\text{Inv}_1$, they create a **positive feedback loop**. If the node starts to leak toward the opposite voltage, the red inverter will actively fight that leakage and \"push\" the node back to its intended logic level.\n\n### 3. Why this removes the minimum frequency requirement\nBy adding the red inverter, the node is **never truly floating**. It is always being driven—either by the clock (when the switch is closed) or by the keeper (when the switch is open).\n\nBecause the keeper constantly replenishes any charge lost to leakage, the circuit can maintain its state indefinitely, regardless of how slowly the clock toggles. This effectively removes the minimum frequency limit that would otherwise be imposed by the leakage of the dynamic node.\n\n### Summary\n*   **Is it a keeper?** Yes. It maintains the logic level of a node that would otherwise be floating.\n*   **Is it a cross-coupled latch?** Yes. It forms a bistable loop with $\\text{Inv}_1$.\n*   **Does it fix leakage issues?** Yes. It prevents leakage from flipping the state during long clock periods, allowing the circuit to operate at very low frequencies.",
        "format": "markdown",
        "sha256": "7b01104ff160e010f1e7e2cb24b914bef9f20bac5c680728983dcc9e3c5c52d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly treats the red inverter as a cross-coupled keeper. Its input is not tied to Inv1’s output; it is an unclocked feedforward branch that bypasses part of the latch path, helping at high speed but potentially overpowering the intended latch behavior at low clock rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 338,
        "output_tokens": 1545,
        "total_tokens": 1883,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 875,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 338,
        "output_tokens": 1545,
        "total_tokens": 1883,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 875,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, I agree with this answer.** The explanation provided is technically accurate.\n\nHere is a detailed breakdown of why that answer is correct and what the actual role of the red inverter is.\n\n### 1. The \"Cross-Coupled Latch\" Mechanism\nIf you look at the path formed by **$\\text{Inv}_1$** and the **red inverter**, they form a closed loop:\n$$\\text{Input of } \\text{Inv}_1 \\rightarrow \\text{Inv}_1 \\rightarrow \\text{Output of } \\text{Inv}_1 \\rightarrow \\text{Red Inverter} \\rightarrow \\text{Input of } \\text{Inv}_1$$\n\nIn digital electronics, two inverters connected in a circle create a **bistable latch**. This circuit can hold one of two states (0 or 1) indefinitely as long as power is supplied.\n\n### 2. The Problem: Floating Nodes and Leakage\nTo understand why the red inverter is necessary, consider what happens when it is **not** there:\n\n*   **When $CK = 1$:** The first switch is closed. The signal from the main ring flows into $\\text{Inv}_1$.\n*   **When $CK = 0$:** The first switch opens. The input to $\\text{Inv}_1$ is now **disconnected** (floating).\n\nIn an ideal world, a floating node holds its voltage forever. However, in real silicon (especially in deep sub-micron processes), **leakage currents** (subthreshold leakage, gate leakage) exist. If the input of $\\text{Inv}_1$ is left floating for too long, the voltage will slowly drift toward a threshold where the inverter changes its output state or becomes indeterminate.\n\nBecause of this, if you have a very slow clock (a very long period where $CK=0$), the stored value will \"leak away\" and be lost. This creates a **minimum clock frequency requirement**: you must toggle the clock fast enough to \"refresh\" the state before leakage destroys it.\n\n### 3. The Solution: The Red Inverter as a \"Keeper\"\nThe red inverter acts as a **keeper** (specifically, a static feedback keeper). \n\nWhen $CK = 0$ and the main ring is disconnected, the red inverter is still connected to the input of $\\text{Inv}_1$. It continuously drives the input node to the correct logic level based on the output of $\\text{Inv}_1$. \n\n*   If the output of $\\text{Inv}_1$ is `High`, the red inverter drives the input to `Low`.\n*   If the output of $\\text{Inv}_1$ is `Low`, the red inverter drives the input to `High`.\n\nBy providing a constant, active drive to the node, it **overpowers the leakage currents**. \n\n### Summary of the Red Inverter's Role:\n1.  **State Retention:** It converts a dynamic storage element (which relies on capacitance and is prone to leakage) into a static storage element (a latch).\n2.  **Eliminating Min-Frequency:** Because the state is now held statically, the circuit can stay in the $CK=0$ state for an infinite amount of time without losing data. This removes the need for a minimum operating frequency.\n3.  **Noise Immunity:** It makes the input of $\\text{Inv}_1$ less susceptible to noise when the switch is open.",
        "format": "markdown",
        "sha256": "59ffd52751df7fb08dea47fa512525d09fb43dde890c77012c95fa2dcae10b44"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly treats the red inverter as cross-coupled with Inv1 and as a leakage keeper. It is an unclocked feedforward branch that bypasses part of the latch path: it can improve high-speed operation but can overpower the intended behavior at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 256,
        "input_tokens": 338,
        "output_tokens": 1862,
        "total_tokens": 2200,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1136,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 256,
        "input_tokens": 338,
        "output_tokens": 1862,
        "total_tokens": 2200,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1136,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "I **agree** with the answer provided. The analysis is correct based on the principles of CMOS digital design.\n\nHere is a detailed breakdown of why that answer is correct and what the actual role of the red inverter is.\n\n### 1. The Circuit Context\nThe figure shows a modified ring oscillator. The switches (controlled by $CK$ and $\\overline{CK}$) ensure that only one part of the circuit is \"active\" or connected to the main loop at a time. \n\nWhen the switch $CK$ is **open**, the input to $\\text{Inv}_1$ is disconnected from the rest of the loop. In a standard dynamic circuit, this input node would be \"floating\" (acting as a capacitor).\n\n### 2. The Problem: Leakage and Minimum Frequency\nIn a purely dynamic circuit, a floating node holds its logic value (0 or 1) based on stored charge. However, due to **sub-threshold leakage** and **gate leakage** in MOSFETs, that charge slowly leaks away.\n\n*   If the clock frequency is very high, the switch $CK$ closes again before the voltage on the floating node drifts to an indeterminate level.\n*   If the clock frequency is **too low**, the node leaks so much that the logic state is lost or flips. This creates a **minimum clock frequency requirement** to ensure the circuit functions reliably.\n\n### 3. The Role of the Red Inverter: The \"Keeper\"\nThe red inverter is connected in a feedback loop with $\\text{Inv}_1$. \n*   The output of $\\text{Inv}_1$ is the input to the red inverter.\n*   The output of the red inverter is the input to $\\text{Inv}_1$.\n\nThis configuration is a **cross-coupled inverter pair**, which is the fundamental building block of an **SRAM cell (a static latch)**.\n\n**How it works as a \"Keeper\":**\nWhen the switch $CK$ is open, the red inverter and $\\text{Inv}_1$ form a stable, bi-stable loop. If leakage tries to pull the input of $\\text{Inv}_1$ toward ground, the red inverter (which is seeing a '1' at its input) will actively drive the node back to '1'. \n\nEssentially, it converts a **dynamic storage node** (which relies on a capacitor) into a **static storage node** (which relies on active feedback).\n\n### 4. Conclusion\nBecause the state is now held **statically** by the latch:\n1.  **The state is maintained indefinitely**, regardless of how long the switch $CK$ remains open.\n2.  **The minimum clock frequency requirement is removed**, because the circuit no longer relies on the \"refresh rate\" of the clock to overcome leakage.\n\n**Summary of the red inverter's role:** It transforms the input of $\\text{Inv}_1$ from a leaky dynamic node into a static latch, ensuring the circuit maintains its state during the \"off\" phase of the clock.",
        "format": "markdown",
        "sha256": "d85795bf0e97d14cb95aa5c22e9b490b6a3331d109430b3df6207f55af16fba1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly treats the red inverter as cross-coupled with Inv1, though its input is not tied to Inv1’s output. It misses the feedforward bypass and its tradeoff: faster high-speed operation but possible corruption at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 337,
        "output_tokens": 1639,
        "total_tokens": 1976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1002,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 337,
        "output_tokens": 1639,
        "total_tokens": 1976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1002,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the **Noise Figure (NF)** of the circuit shown (which is a **shunt-feedback amplifier**), we must analyze the relationship between the input impedance, the noise sources, and the gain.\n\n### 1. Understanding the Constraint ($R_{in} = 50\\ \\Omega$)\nIn a shunt-feedback amplifier, the input resistance $R_{in}$ is determined by the open-loop gain of the amplifier stage and the feedback resistor $R_F$. The approximate formula is:\n$$R_{in} \\approx \\frac{R_F}{1 + |A_{v0}|}$$\nWhere $A_{v0}$ is the open-loop voltage gain of the amplifier (primarily determined by $M_1$). Since $R_{in}$ must remain $50\\ \\Omega$, any change we make to the gain ($A_{v0}$) must be compensated for by a proportional change in $R_F$ to keep the ratio constant.\n\n---\n\n### 2. Identifying the Noise Sources\nThe total noise at the input consists of:\n1.  **Source Resistance Noise:** Thermal noise from the $50\\ \\Omega$ source.\n2.  **Feedback Resistor Noise:** Thermal noise from $R_F$.\n3.  **Transistor $M_1$ Noise:** Channel thermal noise (dominant) and induced gate noise.\n4.  **Transistor $M_2$ Noise:** Thermal noise from the source-follower stage (usually negligible due to the gain of $M_1$).\n\nTo minimize the NF, we need to minimize the noise contributed by $R_F$ and $M_1$ relative to the source noise.\n\n---\n\n### 3. Optimization Strategies\n\n#### A. Increase the Transconductance ($g_{m1}$) of $M_1$\nThe equivalent input-referred noise voltage of the MOSFET is inversely proportional to its transconductance:\n$$V_{n,in}^2 \\propto \\frac{\\gamma}{g_{m1}}$$\nTo lower the noise, you should **increase $g_{m1}$**. This can be achieved by:\n*   Increasing the **width ($W$)** of $M_1$.\n*   Increasing the **bias current ($I_D$)** flowing through $M_1$.\n\n#### B. Increase the Feedback Resistor ($R_F$)\nThe thermal noise current contributed by $R_F$ is $i_{n, RF}^2 = 4kT/R_F$. To minimize this noise contribution, **$R_F$ should be as large as possible**.\n\n**The Synergy:** \nBecause of the $R_{in}$ constraint ($R_{in} \\approx R_F / (1 + A_{v0})$), increasing $g_{m1}$ increases the open-loop gain $A_{v0}$. To keep $R_{in}$ at $50\\ \\Omega$ while $A_{v0}$ increases, you **must** increase $R_F$. \n*   **Higher $g_{m1}$** $\\rightarrow$ Lower transistor noise.\n*   **Higher $R_F$** $\\rightarrow$ Lower feedback resistor noise.\n*   **Result:** Both actions simultaneously lower the Noise Figure.\n\n#### C. Optimize $M_2$ (The Buffer)\n$M_2$ acts as a source follower to provide a low output impedance. While its noise contribution is small, it can be further minimized by:\n*   Ensuring $M_2$ has a high $g_{m2}$ (large $W/L$) to ensure the noise of the second stage is heavily suppressed by the gain of the first stage.\n\n---\n\n### Summary Table for Optimization\n\n| Parameter | Action | Reason | Effect on $R_{in}$ |\n| :--- | :--- | :--- | :--- |\n| **$g_{m1}$** | $\\uparrow$ Increase | Reduces $M_1$ thermal noise | $\\downarrow$ Decreases $R_{in}$ |\n| **$R_F$** | $\\uparrow$ Increase | Reduces $R_F$ thermal noise | $\\uparrow$ Increases $R_{in}$ |\n| **$W_1$** | $\\uparrow$ Increase | Increases $g_{m1}$ | $\\downarrow$ Decreases $R_{in}$ |\n| **$I_{bias}$** | $\\uparrow$ Increase | Increases $g_{m1}$ | $\\downarrow$ Decreases $R_{in}$ |\n\n**Final Optimization Rule:** \nTo optimize for NF while keeping $R_{in} = 50\\ \\Omega$, **increase the size and bias current of $M_1$ to maximize $g_{m1}$, and simultaneously increase $R_F$ to maintain the $50\\ \\Omega$ input match.**",
        "format": "markdown",
        "sha256": "de89ab21d1b01e31933ef489f5bd4ea3853a2cb457e81a2e28f02c621f43eebb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the correct qualitative action—raise gm and RF together while retuning to keep Rin at 50 Ω. However, it omits the finite-output-resistance mechanism that permits gm to exceed 1/Rs and NF to fall below 1 + γ, and incorrectly treats M2 as a source follower rather than part of the inverter.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 315,
        "output_tokens": 2319,
        "total_tokens": 2634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1287,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 315,
        "output_tokens": 2319,
        "total_tokens": 2634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1287,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the Noise Figure (NF) of the circuit shown (a common-source amplifier with shunt-feedback), we must balance the noise contributions of the active device ($M_1$) and the passive feedback element ($R_F$), while adhering to the constraint that the input resistance $R_{in} = 50\\ \\Omega$.\n\nHere is the step-by-step engineering approach to optimize this circuit:\n\n### 1. Understand the Input Resistance Constraint\nFor a shunt-feedback amplifier, the input resistance $R_{in}$ is approximately given by:\n$$R_{in} \\approx \\frac{R_F}{1 + A_{vol}} \\approx \\frac{R_F}{1 + g_{m1} R_L}$$\nWhere:\n*   $g_{m1}$ is the transconductance of transistor $M_1$.\n*   $R_L$ is the effective load resistance (determined by $M_2$ and the output node).\n*   $A_{vol}$ is the open-loop voltage gain.\n\nSince $R_{in}$ must remain $50\\ \\Omega$, any change to the transistor's size or bias (which changes $g_{m1}$) must be compensated for by a proportional change in $R_F$ to maintain the ratio.\n\n### 2. Identify the Noise Sources\nThe Noise Figure is dominated by two primary thermal noise sources in this topology:\n1.  **The Feedback Resistor ($R_F$):** The thermal noise power is proportional to $4kTR_F$. A larger $R_F$ increases the noise voltage added to the input.\n2.  **The Input Transistor ($M_1$):** The channel thermal noise is proportional to $4kT\\gamma g_{m1}$. While increasing $g_{m1}$ generally reduces the *equivalent* input noise resistance, it also affects the feedback loop.\n\n### 3. The Optimization Trade-off\nTo minimize the NF, we face a classic trade-off:\n\n*   **If we increase $g_{m1}$** (by increasing the width $W$ of $M_1$ or increasing the drain current $I_D$):\n    *   The noise contribution of the transistor $M_1$ relative to the signal decreases.\n    *   **However**, to keep $R_{in} = 50\\ \\Omega$, we must **increase $R_F$** (because $R_{in} \\propto R_F / g_{m1}$).\n    *   Increasing $R_F$ increases the thermal noise contributed by the resistor itself.\n\n*   **If we decrease $g_{m1}$**:\n    *   We can use a smaller $R_F$, which reduces the resistor's thermal noise.\n    *   **However**, the noise contribution of the transistor $M_1$ becomes dominant, increasing the NF.\n\n### 4. Finding the \"Sweet Spot\" (The Optimum)\nThe NF is minimized when the noise contribution from the feedback resistor is roughly equal to the noise contribution from the transistor. \n\n**The optimization process follows these steps:**\n1.  **Sizing $M_1$:** Increase the $W/L$ ratio of $M_1$ to achieve a high $g_{m1}$ for a given current. This allows for a higher $R_F$ while keeping $R_{in}$ low.\n2.  **Biasing:** Adjust the bias current $I_D$. Higher current increases $g_{m1}$ (reducing transistor noise) but may increase power consumption and potentially shift the optimal noise point.\n3.  **Iterative Calculation:** \n    *   Set $R_F = 50 \\cdot (1 + g_{m1} R_L)$.\n    *   Substitute this $R_F$ into the NF equation.\n    *   Differentiate the NF equation with respect to $g_{m1}$ and set it to zero ($\\frac{\\partial NF}{\\partial g_{m1}} = 0$) to find the optimal transconductance.\n\n### Summary Table for Optimization\n\n| Parameter | Action | Effect on $R_{in}$ | Effect on NF |\n| :--- | :--- | :--- | :--- |\n| **$g_{m1} \\uparrow$** | Increase $W/L$ or $I_D$ | Decreases $R_{in}$ | Decreases transistor noise $\\downarrow$ |\n| **$R_F \\uparrow$** | Increase resistance | Increases $R_{in}$ | Increases resistor noise $\\uparrow$ |\n| **Combined** | **Increase both proportionally** | **Stays $50\\ \\Omega$** | **Optimized at the point where noise sources balance** |",
        "format": "markdown",
        "sha256": "af0f3ffa02b65e2d26337ad8d8acf103d13e7a4ce5fe5599376258d68de7d982"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes shunt feedback and that increasing gm while adjusting RF can preserve the match. But it misses the finite-output-resistance mechanism and incorrectly claims an equal-noise sweet spot; the key result is that NF can fall below 1 + gamma as gm increases with RF adjusted.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 316,
        "output_tokens": 2183,
        "total_tokens": 2499,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1159,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 316,
        "output_tokens": 2183,
        "total_tokens": 2499,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1159,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the Noise Figure (NF) of the provided circuit (a **shunt-feedback cascode amplifier**) while keeping the input resistance $R_{in}$ fixed at $50\\ \\Omega$, we must analyze the relationship between the feedback resistor, the transconductance of the input transistor, and the resulting noise contributions.\n\n### 1. Understanding the Input Resistance ($R_{in}$)\nIn a shunt-feedback amplifier, the input resistance is not simply the gate resistance (which is nearly infinite); it is determined by the feedback loop. The approximate formula for $R_{in}$ is:\n$$R_{in} \\approx \\frac{R_F}{1 + A_{v0}}$$\nWhere:\n*   **$R_F$** is the feedback resistor.\n*   **$A_{v0}$** is the open-loop gain from the gate to the drain of $M_1$ (approximately $g_{m1} \\cdot r_{out1}$).\n\nTo keep $R_{in} = 50\\ \\Omega$, any change in the gain ($A_{v0}$) must be compensated by a proportional change in $R_F$.\n\n---\n\n### 2. Identifying Noise Sources\nThe Noise Figure is primarily dominated by two sources in this topology:\n1.  **Thermal Noise of $R_F$:** The resistor $R_F$ contributes thermal noise. Because it is in the feedback path, its noise is referred to the input.\n2.  **Channel Thermal Noise of $M_1$:** The noise of the input MOSFET is inversely proportional to its transconductance ($g_{m1}$). Specifically, the noise voltage is proportional to $\\frac{1}{g_{m1}}$.\n\n---\n\n### 3. Optimization Strategy for NF\nTo minimize the NF while maintaining $R_{in} = 50\\ \\Omega$, follow these steps:\n\n#### A. Increase the Transconductance ($g_{m1}$)\nThe most effective way to reduce the noise contribution of the input transistor is to increase $g_{m1}$. You can achieve this by:\n*   **Increasing the Width ($W_1$)** of $M_1$.\n*   **Increasing the Bias Current ($I_{D1}$)**.\n*   **Increasing the Overdrive Voltage ($V_{GS} - V_{th}$)**.\n\n**Why this helps NF:** A higher $g_{m1}$ reduces the equivalent input-referred noise voltage of the transistor.\n\n#### B. Increase $R_F$ Proportionally\nAs you increase $g_{m1}$, the open-loop gain $A_{v0}$ increases. To keep $R_{in}$ constant at $50\\ \\Omega$, you must **increase the value of $R_F$** according to the formula:\n$$R_F = R_{in}(1 + A_{v0})$$\n\n**Why this helps NF:** While it seems counterintuitive to increase a resistor to lower noise, the noise contribution of $R_F$ referred to the input is scaled by the feedback factor. By increasing $A_{v0}$ and $R_F$ together, the relative contribution of the resistor's thermal noise to the total NF actually decreases compared to the signal gain.\n\n#### C. Optimize the Cascode Transistor ($M_2$)\n$M_2$ is used to mitigate the Miller effect and increase the output impedance. To ensure $M_2$ does not degrade the NF:\n*   Ensure $M_2$ has enough $g_{m2}$ to keep the pole at the drain of $M_1$ at a very high frequency.\n*   Keep $M_2$ biased in the saturation region to maintain high gain, which supports the $R_{in}$ stability.\n\n---\n\n### Summary Table for Optimization\n\n| Parameter | Action | Effect on $R_{in}$ | Effect on NF |\n| :--- | :--- | :--- | :--- |\n| **$g_{m1}$ (via $W/L$ or $I_D$)** | $\\uparrow$ Increase | $\\downarrow$ Decreases | $\\downarrow$ **Decreases (Improves)** |\n| **$R_F$** | $\\uparrow$ Increase | $\\uparrow$ Increases | $\\downarrow$ **Decreases (Improves)** |\n| **Combined** | **Increase both** | **Stays $50\\ \\Omega$** | $\\downarrow$ **Optimized (Lower NF)** |\n\n### Final Conclusion\nTo optimize for NF while keeping $R_{in} = 50\\ \\Omega$, you should **maximize the $g_m$ of $M_1$** (by increasing size and current) and **simultaneously increase $R_F$** to maintain the $50\\ \\Omega$ match. The trade-off for this optimization will be **increased power consumption** and a potential decrease in the linearity (IP3) of the amplifier.",
        "format": "markdown",
        "sha256": "f23dec1bc7c20e3b2a75384db9c9eef58e2662e177ed97f15dd43cf5458218d7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The main design direction is right: increase gm and adjust RF upward to keep the 50-ohm match, which can reduce NF. However, it misidentifies the CMOS inverter as a cascode, treats M2’s role and the relevant gm incompletely, and does not explain the finite-ro relation that allows gm to exceed 1/Rs and NF to fall below 1 + gamma.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 315,
        "output_tokens": 2292,
        "total_tokens": 2607,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1232,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 315,
        "output_tokens": 2292,
        "total_tokens": 2607,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1232,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance ($R_{\\text{in}}$) of the given circuit, we need to analyze the components connected to the input node, labeled as node $P$.\n\n### 1. Analysis of the Input Node\nThe input to the circuit is provided by a current source $I_{\\text{in}}$ in parallel with a capacitor $C_{\\text{in}}$. The input impedance $R_{\\text{in}}$ is the equivalent resistance seen by the source $I_{\\text{in}}$ looking into node $P$.\n\n### 2. Identifying the Component at Node $P$\nNode $P$ is connected directly to the **gate** of the NMOS transistor $M_1$. \n\nIn a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor), the gate is physically separated from the conductive channel by a very thin layer of silicon dioxide ($\\text{SiO}_2$). This oxide layer acts as an electrical insulator.\n\n### 3. Determining the Impedance\nBecause of this insulating layer, virtually no DC current can flow from the gate into the channel of the transistor. In an ideal MOSFET model:\n*   The DC resistance of the gate is considered **infinite** ($\\infty$).\n*   The input impedance at low frequencies is dominated by this infinite resistance.\n*   At high frequencies, the input impedance is dominated by the input capacitance $C_{\\text{in}}$ (and the internal gate capacitance), given by $Z_{\\text{in}} \\approx \\frac{1}{sC_{\\text{in}}}$.\n\nSince the question asks for the input resistance $R_{\\text{in}}$, we are looking for the real (resistive) part of the impedance.\n\n### Conclusion\nRegardless of the feedback resistor $R_F$ (which is connected to the source of $M_1$) or the load resistors $R_{D1}$ and $R_{D2}$, the input node $P$ only \"sees\" the insulated gate of $M_1$. Therefore, the input resistance is:\n\n$$R_{\\text{in}} = \\infty$$",
        "format": "markdown",
        "sha256": "f67421c1e7af4beddb46a658c893417a7d40c7d6d4b66d6d17f5bafdb0f52555"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It ignores the feedback resistor that sets the input resistance through Miller effect and incorrectly concludes the input resistance is infinite. The required result is finite: (RF + RD2)/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 303,
        "output_tokens": 7357,
        "total_tokens": 7660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 303,
        "output_tokens": 7357,
        "total_tokens": 7660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance of the circuit, we need to analyze the node where the input signal is applied.\n\n### 1. Analysis of the Input Node\nThe input signal is applied at **node $P$**. Looking at the circuit diagram, node $P$ is connected directly to the **gate** of the NMOS transistor $M_1$.\n\n### 2. MOSFET Gate Characteristics\nIn a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor), the gate is physically isolated from the channel by a thin layer of silicon dioxide ($\\text{SiO}_2$). This oxide layer acts as a very high-quality insulator.\n\nBecause of this insulation:\n*   **DC Current:** Virtually no current flows into the gate of a MOSFET under steady-state conditions.\n*   **Input Resistance:** The resistance looking into the gate of a MOSFET is extremely high, typically in the range of $10^{12} \\Omega$ to $10^{15} \\Omega$.\n\n### 3. Effect of the Rest of the Circuit\nWhile there is a feedback loop in the circuit (via resistor $R_F$ connected to the source of $M_1$), this feedback affects the **gain** and the **output impedance**, but it does not create a conductive path from the gate to ground or any other node. The gate remains isolated.\n\nThe capacitor $C_{in}$ is in parallel with the input, which affects the total input *impedance* ($Z_{in}$) at high frequencies, but the question specifically asks for the input *resistance* $R_{in}$ (as indicated by the label in the figure).\n\n### Conclusion\nSince the input node $P$ is the gate of a MOSFET and there are no other resistive paths connected to that node, the input resistance is theoretically infinite.\n\n**Final Answer:**\n$$R_{in} = \\infty$$",
        "format": "markdown",
        "sha256": "6f62d1c5e2a0756e604166685eb0e0c44a530ba8621fd7c51da9d0773b71aa3c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer ignores the feedback resistor’s path from the input node to the amplifier output and incorrectly concludes that the input resistance is infinite. The required result is the finite Miller-theorem resistance, (RF + RD2)/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 303,
        "output_tokens": 1759,
        "total_tokens": 2062,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1365,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 303,
        "output_tokens": 1759,
        "total_tokens": 2062,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1365,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance $R_{\\text{in}}$ of the given circuit, we will use small-signal analysis. The input impedance is defined as the ratio of the input voltage $v_{\\text{in}}$ at node $P$ to the total current $i_{\\text{in}}$ entering that node.\n\n### 1. Small-Signal Analysis of the Amplifier Stage\nFirst, let's determine the transconductance $G_m$ of the amplifier part of the circuit (from node $P$ to the output node $V_{\\text{out}}$).\n\n*   **Node $X$:** Let $v_x$ be the small-signal voltage at node $X$. The current entering node $X$ from $M_1$ is $g_{m1} v_{\\text{in}}$. This current is split between the resistor $R_{D1}$ and the diode-connected transistor $M_2$.\n    The total conductance at node $X$ is $G_X = \\frac{1}{R_{D1}} + g_{m2} + \\frac{1}{r_{o2}}$.\n    Thus, the voltage at node $X$ is:\n    $$v_x = \\frac{g_{m1} v_{\\text{in}}}{G_X} = \\frac{g_{m1} v_{\\text{in}}}{\\frac{1}{R_{D1}} + g_{m2} + \\frac{1}{r_{o2}}}$$\n\n*   **Output Node $V_{\\text{out}}$:** The current $i_{d2}$ flowing through $M_2$ is $(g_{m2} + \\frac{1}{r_{o2}}) v_x$. This current is mirrored by $M_3$ with a ratio $\\alpha = \\frac{(W/L)_3}{(W/L)_2}$. The current delivered to the output node from the amplifier stage is:\n    $$i_{\\text{out}} = \\alpha \\left( g_{m2} + \\frac{1}{r_{o2}} \\right) v_x = \\frac{\\alpha (g_{m2} + \\frac{1}{r_{o2}}) g_{m1}}{G_X} v_{\\text{in}}$$\n    We define the overall transconductance of the stage as $G_m = \\frac{i_{\\text{out}}}{v_{\\text{in}}}$:\n    $$G_m = \\frac{\\alpha (g_{m2} + \\frac{1}{r_{o2}}) g_{m1}}{\\frac{1}{R_{D1}} + g_{m2} + \\frac{1}{r_{o2}}}$$\n\n### 2. Determining the Input Impedance $R_{\\text{in}}$\nThe input current $i_{\\text{in}}$ enters node $P$. Since the gate of $M_1$ is an open circuit in the small-signal model, all the input current flows through the feedback resistor $R_F$ to the output node $V_{\\text{out}}$:\n$$i_{\\text{in}} = \\frac{v_{\\text{in}} - v_{\\text{out}}}{R_F}$$\nThe input impedance is $R_{\\text{in}} = \\frac{v_{\\text{in}}}{i_{\\text{in}}} = \\frac{R_F}{1 - \\frac{v_{\\text{out}}}{v_{\\text{in}}}}$.\n\nTo find the gain $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$, we apply KCL at the output node $V_{\\text{out}}$:\n$$\\frac{v_{\\text{in}} - v_{\\text{out}}}{R_F} = G_m v_{\\text{in}} + \\frac{v_{\\text{out}}}{R_{D2}}$$\nRearranging to solve for $v_{\\text{out}}$:\n$$v_{\\text{in}} \\left( \\frac{1}{R_F} - G_m \\right) = v_{\\text{out}} \\left( \\frac{1}{R_F} + \\frac{1}{R_{D2}} \\right) \\implies \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{\\frac{1}{R_F} - G_m}{\\frac{1}{R_F} + \\frac{1}{R_{D2}}}$$\n\nNow, substitute this back into the expression for $R_{\\text{in}}$:\n$$1 - \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 1 - \\frac{\\frac{1}{R_F} - G_m}{\\frac{1}{R_F} + \\frac{1}{R_{D2}}} = \\frac{\\frac{1}{R_F} + \\frac{1}{R_{D2}} - \\frac{1}{R_F} + G_m}{\\frac{1}{R_F} + \\frac{1}{R_{D2}}} = \\frac{\\frac{1}{R_{D2}} + G_m}{\\frac{1}{R_F} + \\frac{1}{R_{D2}}}$$\n$$R_{\\text{in}} = \\frac{R_F}{\\frac{\\frac{1}{R_{D2}} + G_m}{\\frac{1}{R_F} + \\frac{1}{R_{D2}}}} = \\frac{R_F \\left( \\frac{1}{R_F} + \\frac{1}{R_{D2}} \\right)}{\\frac{1}{R_{D2}} + G_m} = \\frac{1 + \\frac{R_F}{R_{D2}}}{\\frac{1}{R_{D2}} + G_m}$$\nMultiplying the numerator and denominator by $R_{D2}$:\n$$R_{\\text{in}} = \\frac{R_{D2} + R_F}{1 + G_m R_{D2}}$$\n\n### Final Result\nAssuming $r_{o} \\to \\infty$ and $M_2, M_3$ are matched ($\\alpha = 1$), the transconductance simplifies to $G_m \\approx \\frac{g_{m2} g_{m1}}{g_{m2} + 1/R_{D1}}$. The input impedance is:\n$$R_{\\text{in}} = \\frac{R_{D2} + R_F}{1 + \\left( \\frac{\\alpha (g_{m2} + 1/r_{o2}) g_{m1}}{1/R_{D1} + g_{m2} + 1/r_{o2}} \\right) R_{D2}}$$",
        "format": "markdown",
        "sha256": "541dbb30d094a91ce9e9b62ca62ace702c7336bf69f1a3c216a4e936f73a57ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It derives the correct structural form, Rin = (RF + RD2)/(1 + Gm RD2), and retains the output-side resistance. But its transistor-level Gm comes from an incorrect diode-connected M2/current-mirror model and does not match the required unloaded gain A0 = (1/2) gm1 gm2,3 RD1 RD2, so the final input impedance is not correct.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 303,
        "output_tokens": 7916,
        "total_tokens": 8219,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6451,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 303,
        "output_tokens": 7916,
        "total_tokens": 8219,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6451,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the output phase noise of the VCO caused by the thermal noise of the LDO regulator, you need to analyze how voltage fluctuations at the supply node ($V_{out}$) translate into frequency fluctuations of the oscillator. This phenomenon is known as **Supply Pushing**.\n\nHere is the step-by-step analytical approach to compute this.\n\n---\n\n### 1. Identify the Noise Source\nThe LDO generates a thermal noise voltage with a power spectral density (PSD) denoted as $S_{th}$ (units: $\\text{V}^2/\\text{Hz}$). This noise appears as a small-signal fluctuation $\\delta V_{out}(t)$ riding on the DC supply voltage.\n\n### 2. Determine the Supply Pushing Coefficient ($K_{push}$)\nThe oscillation frequency $\\omega_0$ of an LC VCO is determined by the total inductance $L$ and total capacitance $C_{tot}$:\n$$\\omega_0 = \\frac{1}{\\sqrt{L \\cdot C_{tot}}}$$\n\nIn the provided circuit, $C_{tot}$ includes the fixed capacitors in $B_1/B_2$, the varactors $M_{v1}/M_{v2}$, and the **parasitic capacitances** of the cross-coupled pair $M_1$ and $M_2$ (specifically $C_{gd}$ and $C_{gs}$). \n\nBecause the parasitic capacitances of MOSFETs depend on the drain-source voltage ($V_{DS}$), a change in $V_{out}$ changes the effective capacitance of the tank. The **Supply Pushing Coefficient** is defined as:\n$$K_{push} = \\frac{\\partial \\omega_0}{\\partial V_{out}} \\quad \\left[ \\text{rad/s} \\cdot \\text{V}^{-1} \\right]$$\n\nTo calculate $K_{push}$ analytically:\n$$\\frac{\\partial \\omega_0}{\\partial V_{out}} = \\frac{\\partial \\omega_0}{\\partial C_{tot}} \\cdot \\frac{\\partial C_{tot}}{\\partial V_{out}} = -\\frac{\\omega_0}{2 C_{tot}} \\cdot \\frac{\\partial C_{tot}}{\\partial V_{out}}$$\n\n### 3. Relate Voltage Noise to Frequency Noise\nThe noise voltage $S_{th}$ modulates the frequency, creating frequency fluctuations $\\Delta \\omega$. The PSD of these frequency fluctuations $S_{\\Delta \\omega}$ is:\n$$S_{\\Delta \\omega} = K_{push}^2 \\cdot S_{th} \\quad \\left[ \\text{rad}^2/\\text{s}^2/\\text{Hz} \\right]$$\n\n### 4. Compute the Phase Noise $\\mathcal{L}(\\Delta \\omega)$\nPhase noise is the PSD of the phase fluctuations $\\phi(t)$. Since frequency is the derivative of phase ($\\omega = \\frac{d\\phi}{dt}$), the phase noise is the integral of the frequency noise. For a white frequency noise source (which results from white voltage noise $S_{th}$), the phase noise follows a $1/f^2$ (or $-20\\text{dB/dec}$) slope:\n\n$$S_{\\phi}(\\Delta \\omega) = \\frac{S_{\\Delta \\omega}}{(\\Delta \\omega)^2}$$\n\nTo express this as the standard single-sideband phase noise $\\mathcal{L}(\\Delta \\omega)$:\n$$\\mathcal{L}(\\Delta \\omega) = \\frac{1}{2} S_{\\phi}(\\Delta \\omega) = \\frac{K_{push}^2 \\cdot S_{th}}{2 (\\Delta \\omega)^2}$$\n\nIn decibels:\n$$\\mathcal{L}(\\Delta \\omega) \\text{ [dBc/Hz]} = 10 \\log_{10} \\left( \\frac{K_{push}^2 \\cdot S_{th}}{2 (\\Delta \\omega)^2} \\right)$$\n\n---\n\n### Summary of the Computation Flow\n\n$$\\text{LDO Noise } (S_{th}) \\xrightarrow{\\text{Supply Pushing } (K_{push})} \\text{Freq. Noise } (S_{\\Delta \\omega}) \\xrightarrow{\\text{Integration}} \\text{Phase Noise } (\\mathcal{L})$$\n\n### Additional Considerations for a Complete Analysis:\n1.  **PSRR of the Current Source:** If the current source $I_{VCO}$ is not ideal, $V_{out}$ noise will modulate the tail current. This changes the bias point of $M_1/M_2$, further altering their parasitic capacitances. This adds to the effective $K_{push}$.\n2.  **ISF Method:** For a more rigorous time-domain analysis, you can use the **Impulse Sensitivity Function (ISF)**, $\\Gamma(t)$. The phase shift $\\Delta \\phi$ is calculated by integrating the noise current injected into the tank (caused by $S_{th}$ through the output resistance of the LDO and the input impedance of the VCO) multiplied by the ISF.\n3.  **Filtering:** If there is a decoupling capacitor between the LDO and the VCO, the noise $S_{th}$ will be low-pass filtered before reaching the VCO, reducing the phase noise at higher offset frequencies.",
        "format": "markdown",
        "sha256": "b33d0efbb0054c2773ed40338a3313651082d4891ff212fa3bc351631f0ef3a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and gives the appropriate frequency-noise-to-phase-noise conversion with a 1/offset² dependence; its angular-frequency form is equivalent. However, it attributes the pushing mainly to transistor parasitics and omits the circuit-specific point that the supply perturbs the varactors, making Kpush closely related to KVCO.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 308,
        "output_tokens": 2356,
        "total_tokens": 2664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1246,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 308,
        "output_tokens": 2356,
        "total_tokens": 2664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1246,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise resulting from the LDO regulator's thermal noise, you need to determine how voltage fluctuations at the supply node ($V_{out}$) translate into frequency fluctuations of the oscillator. This process is known as **Supply Pushing**.\n\nHere is the step-by-step analytical approach to compute this:\n\n### 1. Identify the Noise Source\nThe LDO generates a thermal noise power spectral density (PSD) at its output, denoted as $S_{Vout}(f)$ (or $S_{th}$ in your prompt). This is a voltage noise source in parallel with the LDO output.\n\n### 2. Determine the Pushing Factor ($K_{push}$)\nThe most critical parameter is the **Pushing Factor**, which describes the sensitivity of the VCO's oscillation frequency ($f_0$) to changes in the supply voltage ($V_{out}$). It is defined as:\n$$K_{push} = \\frac{\\partial f_0}{\\partial V_{out}} \\quad \\left[ \\text{Hz/V} \\right]$$\n\n**How to find $K_{push}$:**\n*   **Simulation:** Run a DC sweep of $V_{out}$ and measure the resulting oscillation frequency $f_0$. The slope of the $f_0$ vs. $V_{out}$ curve is $K_{push}$.\n*   **Analytical:** $K_{push}$ depends on the parasitic capacitances of the transistors ($M_1, M_2$) and the varactors. Since $f_0 \\approx \\frac{1}{2\\pi\\sqrt{L C_{total}}}$, any change in $V_{out}$ that changes the junction capacitances ($C_{gs}, C_{gd}$) or the bias point of the cross-coupled pair will shift the frequency.\n\n### 3. Convert Voltage Noise to Frequency Noise\nThe LDO voltage noise $S_{Vout}(f)$ causes a corresponding frequency fluctuation $S_{\\Delta f}(f)$ via the pushing factor:\n$$S_{\\Delta f}(f) = K_{push}^2 \\cdot S_{Vout}(f) \\quad \\left[ \\text{Hz}^2/\\text{Hz} \\right]$$\n\n### 4. Convert Frequency Noise to Phase Noise\nPhase is the integral of frequency. In the frequency domain, the relationship between the PSD of frequency fluctuations $S_{\\Delta f}(f)$ and the PSD of phase fluctuations $S_{\\phi}(f)$ is:\n$$S_{\\phi}(f) = \\frac{S_{\\Delta f}(f)}{(2\\pi f)^2}$$\n*(Note: This assumes the noise is at an offset frequency $f$ from the carrier $\\omega_0$.)*\n\nSubstituting the expression from Step 3:\n$$S_{\\phi}(f) = \\frac{K_{push}^2 \\cdot S_{Vout}(f)}{(2\\pi f)^2} \\quad \\left[ \\text{rad}^2/\\text{Hz} \\right]$$\n\n### 5. Express in Decibels ($\\mathcal{L}$)\nPhase noise is typically reported as a single-sideband (SSB) power ratio $\\mathcal{L}(f)$ in $\\text{dBc/Hz}$:\n$$\\mathcal{L}(f) = 10 \\log_{10} \\left( \\frac{S_{\\phi}(f)}{2} \\right) = 10 \\log_{10} \\left( \\frac{K_{push}^2 \\cdot S_{Vout}(f)}{2(2\\pi f)^2} \\right)$$\n\n---\n\n### Summary of the Computation Flow\n$$\\text{LDO Noise } (S_{Vout}) \\xrightarrow{\\text{Pushing Factor } (K_{push})} \\text{Freq. Noise } (S_{\\Delta f}) \\xrightarrow{\\text{Integration } (1/f^2)} \\text{Phase Noise } (S_{\\phi})$$\n\n### Key Design Insights for Reduction:\nIf the resulting phase noise is too high, you can mitigate it by:\n1.  **Increasing LDO PSRR:** Reducing $S_{Vout}$ at the source.\n2.  **Reducing $K_{push}$:** Using a **regulated supply** (an internal low-gain amplifier) or a **current-steering** topology that makes the tank capacitance less dependent on the supply voltage.\n3.  **Adding Decoupling:** Adding a large capacitor at $V_{out}$ to filter the LDO noise at higher offset frequencies.",
        "format": "markdown",
        "sha256": "b18fd9aa09869900e74b591c217a271beb858f6b15ff1c9c64ad282c48f25dbf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly uses supply pushing, converts LDO voltage-noise PSD to frequency noise, and applies the expected 1/offset-frequency-squared FM-to-phase relation; the factor conventions are allowed. It misses the circuit-specific insight that supply noise acts directly on the varactors, making Kpush closely related to KVCO, and instead gives generic reduction advice.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 309,
        "output_tokens": 1762,
        "total_tokens": 2071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 802,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 309,
        "output_tokens": 1762,
        "total_tokens": 2071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 802,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise resulting from the thermal noise of the LDO regulator, you need to analyze how voltage fluctuations at the supply rail ($V_{out}$) translate into fluctuations in the oscillation frequency. This phenomenon is known as **Frequency Pushing**.\n\nHere is the step-by-step derivation and the methodology to compute it.\n\n---\n\n### 1. Identify the Noise Source\nThe LDO generates a thermal noise voltage with a power spectral density (PSD) denoted as $S_{th}$ (units: $\\text{V}^2/\\text{Hz}$). This noise appears as a time-varying fluctuation on the supply rail:\n$$V_{out}(t) = \\langle V_{out} \\rangle + \\Delta V_{out}(t)$$\n\n### 2. Determine the Pushing Coefficient ($K_{push}$)\nThe oscillation frequency $\\omega_0$ of the VCO is determined by the LC tank: $\\omega_0 = 1/\\sqrt{L C_{total}}$. \nThe total capacitance $C_{total}$ includes the varactors ($B_1, B_2$) and the parasitic capacitances of the MOSFETs ($M_1, M_2$). Because the parasitic capacitances (specifically $C_{gd}$ and $C_{db}$) depend on the supply voltage $V_{out}$, a change in $V_{out}$ causes a change in $\\omega_0$.\n\nWe define the **Pushing Coefficient**, $K_{push}$, as the sensitivity of the frequency to the supply voltage:\n$$K_{push} = \\frac{\\partial \\omega_0}{\\partial V_{out}} \\quad \\left[ \\text{rad/s} \\cdot \\text{V}^{-1} \\right]$$\n*This value is typically determined via simulation (sweeping $V_{out}$ and measuring $\\omega_0$) or by analyzing the voltage coefficient of the parasitic capacitors.*\n\n### 3. Relate Voltage Noise to Frequency Noise\nThe fluctuation in the supply voltage $\\Delta V_{out}$ causes a corresponding fluctuation in the angular frequency $\\Delta \\omega$:\n$$\\Delta \\omega(t) = K_{push} \\cdot \\Delta V_{out}(t)$$\n\nIn the frequency domain, the PSD of the frequency fluctuations $S_{\\Delta \\omega}^2(\\omega)$ is related to the LDO noise $S_{th}$ by:\n$$S_{\\Delta \\omega}^2(\\omega) = K_{push}^2 \\cdot S_{th}$$\n\n### 4. Relate Frequency Noise to Phase Noise\nPhase $\\phi(t)$ is the integral of frequency. In the frequency domain, integration corresponds to dividing by $\\omega^2$. The PSD of the phase fluctuations $S_\\phi(\\omega)$ is:\n$$S_\\phi(\\omega) = \\frac{S_{\\Delta \\omega}^2(\\omega)}{\\omega^2} = \\frac{K_{push}^2 \\cdot S_{th}}{\\omega^2}$$\n\n### 5. Final Phase Noise Calculation ($\\mathcal{L}$)\nPhase noise $\\mathcal{L}(\\Delta \\omega)$ is typically expressed as a single-sideband (SSB) power ratio. For a frequency offset $\\Delta \\omega$ from the carrier:\n$$\\mathcal{L}(\\Delta \\omega) = 10 \\log_{10} \\left( \\frac{S_\\phi(\\Delta \\omega)}{2} \\right)$$\n\nSubstituting the expression from Step 4:\n$$\\mathcal{L}(\\Delta \\omega) = 10 \\log_{10} \\left( \\frac{K_{push}^2 \\cdot S_{th}}{2 \\cdot \\Delta \\omega^2} \\right)$$\n\n---\n\n### Summary Table for Computation\n\n| Parameter | Symbol | How to find it |\n| :--- | :--- | :--- |\n| **LDO Noise PSD** | $S_{th}$ | Provided (or from LDO datasheet/simulation) |\n| **Pushing Coefficient** | $K_{push}$ | $\\frac{\\Delta \\omega_0}{\\Delta V_{out}}$ (Simulation/Measurement) |\n| **Frequency Offset** | $\\Delta \\omega$ | The offset from the carrier (e.g., $1\\text{MHz}$) |\n| **Phase Noise** | $\\mathcal{L}$ | Use the formula derived above |\n\n### Key Insight\nBecause the LDO noise is multiplied by $1/\\Delta \\omega^2$, the LDO thermal noise contributes primarily to the **close-in phase noise** (the $1/f^2$ region). To minimize this, designers typically use a high-PSRR (Power Supply Rejection Ratio) LDO or add a large decoupling capacitor at $V_{out}$ to low-pass filter the $S_{th}$ noise before it reaches the VCO tank.",
        "format": "markdown",
        "sha256": "2918458063c29637a6f2b94ff0c28255d87628d595e9b99c138e138bfdb25e51"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and converts the LDO noise through Kpush to phase noise with the expected 1/offset² dependence. However, it attributes the circuit sensitivity to parasitic capacitances rather than noting the direct varactor modulation, and omits the Kpush–KVCO relationship and the benefit of reducing KVCO.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 308,
        "output_tokens": 2334,
        "total_tokens": 2642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 308,
        "output_tokens": 2334,
        "total_tokens": 2642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding the capacitor $C_T$ to the tail node (node $P$) generally **reduces the phase noise** of the oscillator.\n\nHere is the detailed technical explanation of why this happens:\n\n### 1. The Role of the Tail Node\nIn an ideal differential oscillator, the tail node $P$ is considered a \"virtual ground\" for the differential signals. However, in reality, the tail node has a finite impedance. Noise generated by the tail current source ($I_{SS}$) can enter the circuit through this node.\n\n### 2. The $2\\omega_0$ Noise Mechanism\nThe most critical issue in these oscillators is the noise at **twice the oscillation frequency ($2\\omega_0$)**. \n*   Because the oscillator is differential, the currents in $M_1$ and $M_2$ fluctuate at $\\omega_0$. \n*   Due to the nature of the differential pair, the common-mode current at the tail node $P$ fluctuates at $2\\omega_0$.\n*   If there is significant noise at $2\\omega_0$ at the tail node, the non-linearity of the transistors can \"mix\" this noise down to the fundamental frequency $\\omega_0$. This process converts amplitude noise into phase noise, which degrades the spectral purity of the oscillator.\n\n### 3. How $C_T$ Improves Performance\nThe capacitor $C_T$ acts as a **low-pass filter (a shunt capacitor)** at the tail node. Its effects are as follows:\n*   **Low Impedance Path:** $C_T$ provides a low-impedance path to ground for high-frequency signals.\n*   **Filtering:** It effectively shorts the noise components at $2\\omega_0$ (and other high-frequency noise from the current source) to ground before they can enter the differential tank.\n*   **Isolation:** By lowering the impedance of node $P$ at high frequencies, it prevents the tail current source from injecting noise into the oscillation loop.\n\n### Summary\nBy adding $C_T$, you are effectively \"cleaning\" the tail node. This suppresses the noise at the second harmonic ($2\\omega_0$), which prevents it from being down-converted to the oscillation frequency, thereby **lowering the overall phase noise** of the system.\n\n**Trade-off:** The only significant trade-off is the **silicon area** required to implement the capacitor, as a larger $C_T$ provides better filtering but takes up more space on the chip.",
        "format": "markdown",
        "sha256": "4f080cf7357e21e54efd8d169ad18ff7abb4ab43b2df762fbe42c40441c0965c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims that adding CT generally and monotonically lowers phase noise through tail-node filtering, missing the nonmonotonic effects and class-C mechanism central to the solution.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 308,
        "output_tokens": 1278,
        "total_tokens": 1586,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 742,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 308,
        "output_tokens": 1278,
        "total_tokens": 1586,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 742,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor $C_T$ to the tail node (node $P$) of a cross-coupled LC oscillator generally **reduces (improves) the phase noise**.\n\nHere is the detailed explanation of why this happens:\n\n### 1. The Role of the Tail Node\nIn a perfectly balanced differential oscillator, the tail node $P$ acts as a \"virtual ground\" for the differential signals. However, it is not a ground for **common-mode signals**. The tail current source $I_{SS}$ is a significant source of thermal and flicker noise.\n\n### 2. Noise Conversion (CM to DM)\nThe noise generated by the current source $I_{SS}$ appears as a common-mode voltage fluctuation at node $P$. While the oscillator is designed to be differential, real-world circuits have slight asymmetries (mismatches in $M_1/M_2$ or $L_1/L_2$). These asymmetries cause **Common-Mode to Differential-Mode (CM-DM) conversion**. \n\nWhen common-mode noise is converted into differential noise, it directly modulates the oscillation frequency, which manifests as **phase noise**.\n\n### 3. The Effect of $C_T$ (Filtering)\nThe capacitor $C_T$ acts as a **low-pass filter** (or a decoupling capacitor) for the tail node. \n*   **At DC:** $C_T$ is an open circuit and does not affect the bias current $I_{SS}$.\n*   **At High Frequencies:** $C_T$ provides a low-impedance path to ground for high-frequency noise components coming from the current source $I_{SS}$.\n\nBy shunting the high-frequency noise from the current source to ground, $C_T$ significantly reduces the voltage fluctuations at node $P$. Since there is less common-mode noise available to be converted into differential noise, the overall phase noise of the oscillator is decreased.\n\n### Summary\n*   **Action:** Adding $C_T$ filters the noise of the tail current source.\n*   **Mechanism:** It reduces the common-mode noise voltage at the tail node, minimizing its conversion into differential phase noise.\n*   **Result:** **Lower phase noise** (better spectral purity).",
        "format": "markdown",
        "sha256": "816430ffba22648f25126fde650c6d26631ae517f17cbb75e9e93208eac890ac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims a monotonic phase-noise improvement from filtering the tail node, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 309,
        "output_tokens": 1143,
        "total_tokens": 1452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 666,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 309,
        "output_tokens": 1143,
        "total_tokens": 1452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 666,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, adding the capacitor $C_T$ to the tail node (node $P$) generally **reduces (improves) the phase noise** of the oscillator.\n\nHere is the detailed explanation of why this happens:\n\n### 1. Suppression of Common-Mode Noise\nIn a differential LC oscillator, the tail node $P$ is intended to be a virtual ground for the differential signals. However, in real circuits, the tail current source ($I_{SS}$) is not ideal and has a finite output impedance. High-frequency noise from the current source or from the power supply can appear at node $P$. \n\nBy adding $C_T$, you create a low-pass filter at the tail node. This **shunts high-frequency common-mode noise to ground**, preventing it from coupling into the differential signal paths (nodes $X$ and $Y$).\n\n### 2. Preventing Tail-Node Resonance\nWithout a decoupling capacitor, the parasitic inductance of the wiring and the output resistance of the current source can create a high-Q resonance at the tail node. If this resonance occurs at a frequency near the oscillation frequency or its harmonics, it can inject significant noise into the tank circuit, drastically increasing the phase noise. $C_T$ lowers the impedance of the tail node at high frequencies, effectively \"damping\" these unwanted resonances.\n\n### 3. Reducing Common-Mode to Differential-Mode Conversion\nWhile the circuit is differential, any asymmetry in the transistors ($M_1, M_2$) or the inductors ($L_1, L_2$) can cause common-mode noise at node $P$ to be converted into differential-mode noise. Since phase noise is measured as a differential signal, any noise at the tail node that converts to differential mode will directly degrade the phase noise performance. $C_T$ minimizes the source of this noise.\n\n### Summary\n*   **Action:** Adding $C_T$ provides a low-impedance path to ground for high-frequency signals at the tail node.\n*   **Effect:** It filters out common-mode noise and suppresses parasitic resonances.\n*   **Result:** The overall **phase noise is reduced**, leading to a cleaner spectral output.",
        "format": "markdown",
        "sha256": "e4858c254b0ad63bbd81c7da0082efaeadf52954cb2f15afc62cb1f85bba18b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims a monotonic phase-noise improvement from tail-node filtering. The effect is nonmonotonic: CT can cause flicker-noise upconversion or low-frequency instability, while improvement can arise from class-C switching.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 309,
        "output_tokens": 1164,
        "total_tokens": 1473,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 309,
        "output_tokens": 1164,
        "total_tokens": 1473,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, this is a **cross-coupled differential LC oscillator** consisting of two identical stages.\n\n### Analysis of the Circuit\n1.  **LC Tank Circuits:** Each stage has an LC tank circuit at its output (nodes $X_1, Y_1$ for the top stage and $X_2, Y_2$ for the bottom stage). The tank consists of the inductors (coils) and the total parasitic capacitance at those nodes.\n2.  **Negative Resistance:** The cross-coupled pairs of transistors within each stage (the inner transistors) are designed to provide \"negative resistance.\" This cancels out the losses (resistance) of the inductors, allowing the circuit to sustain oscillations.\n3.  **Phase Shift:** The cross-coupling between the two stages (the outer transistors) ensures that the total phase shift around the feedback loop is $360^\\circ$ (or $0^\\circ$), which is the condition for oscillation.\n4.  **Frequency Determination:** In any LC-based oscillator, the frequency of oscillation is primarily determined by the resonance frequency of the LC tank.\n\n### Estimation of Oscillation Frequency\nSince no specific values for the components are given in the figure, the oscillation frequency $f$ can be estimated using the standard formula for a resonant LC circuit:\n\n$$f = \\frac{1}{2\\pi\\sqrt{LC}}$$\n\nWhere:\n*   **$L$** is the inductance of the coils shown in the circuit.\n*   **$C$** is the total equivalent capacitance at the output nodes ($X$ and $Y$). This capacitance is the sum of:\n    *   The parasitic capacitances of the transistors (gate-to-source $C_{gs}$, gate-to-drain $C_{gd}$, and drain-to-bulk $C_{db}$).\n    *   Any explicit capacitors that might be added in parallel (though none are shown here).\n    *   Interconnect and pad capacitances.\n\n**Conclusion:**\nThe estimated oscillation frequency is the resonance frequency of the LC tanks:\n$$\\omega_0 \\approx \\frac{1}{\\sqrt{LC}} \\quad \\text{or} \\quad f \\approx \\frac{1}{2\\pi\\sqrt{LC}}$$",
        "format": "markdown",
        "sha256": "be0d9a58af0af3cb9d92aa111a6016dd809cad2cd530f576eaf8dd0d0428700d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly gives the uncoupled LC tank resonance, but treats that as the oscillation frequency and omits the essential coupling-induced shift, such as Δω ≈ αω₀/(2Q).",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3053,
        "total_tokens": 3348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3053,
        "total_tokens": 3348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, this is a **cross-coupled LC oscillator** consisting of two coupled stages. \n\n### Circuit Analysis\n1.  **LC Tank Circuits:** Each stage has a pair of inductors (the coils at the top) and associated parasitic capacitances (from the inductors and the transistors) that form a resonant tank circuit.\n2.  **Negative Resistance:** The cross-coupled pairs of NMOS transistors provide \"negative resistance.\" This cancels out the energy losses (damping) in the LC tanks, allowing the circuit to maintain steady-state oscillations.\n3.  **Coupling:** The two stages are coupled together (nodes $X_1, Y_1$ are connected to the gates of the transistors in the second stage). This coupling is typically used to improve the phase noise or stability of the oscillator, but it does not fundamentally change the primary resonance frequency.\n\n### Estimation of Oscillation Frequency\nThe oscillation frequency of an LC oscillator is primarily determined by the resonance of the tank circuit. For a single stage, the frequency $f$ is given by the standard formula for an LC circuit:\n\n$$f \\approx \\frac{1}{2\\pi\\sqrt{L \\cdot C_{total}}}$$\n\nWhere:\n*   **$L$** is the inductance of the coils.\n*   **$C_{total}$** is the total equivalent capacitance at the nodes $X$ and $Y$. This includes:\n    *   The parasitic capacitance of the inductors.\n    *   The gate-to-drain capacitance ($C_{gd}$) and gate-to-source capacitance ($C_{gs}$) of the MOSFETs.\n    *   Any explicit capacitors that might be present (though none are shown in this simplified schematic).\n\n### Summary\nSince no numerical values for $L$ and $C$ are provided in the figure, the estimated oscillation frequency is defined by the resonance of the LC tanks:\n\n$$\\mathbf{f \\approx \\frac{1}{2\\pi\\sqrt{LC}}}$$\n\nIn a practical design, the frequency would be tuned by adjusting the value of the inductors or adding varactors (voltage-controlled capacitors) to create a Voltage-Controlled Oscillator (VCO).",
        "format": "markdown",
        "sha256": "a9bf8d18e251c0ae8614ab8fc030f16b9ec8c57398f00d4b78da678c17c811c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly gives the tank resonance as the baseline, but omits the coupling-induced frequency shift that is central to the estimate and incorrectly suggests coupling does not change the resonance.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 4074,
        "total_tokens": 4369,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 4074,
        "total_tokens": 4369,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "google/gemma-4-31b-it",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, this is a **cross-coupled LC oscillator** consisting of two coupled stages. \n\n### Analysis of the Circuit\nThe circuit features two identical LC tanks (each consisting of an inductor and the parasitic capacitances of the transistors) that are cross-coupled to provide the necessary positive feedback to sustain oscillations.\n\n1.  **LC Tanks:** The oscillation frequency is primarily determined by the resonance of the LC tanks. Each stage has two inductors (connected to the supply rail) and a set of capacitors formed by the parasitic capacitances of the MOSFETs at nodes $X_1, Y_1$ and $X_2, Y_2$.\n2.  **Cross-Coupling:** The transistors are arranged in cross-coupled pairs. This configuration creates a \"negative resistance\" that cancels out the losses in the inductors, allowing the circuit to oscillate.\n3.  **Coupling between Stages:** The two stages are coupled together (e.g., $X_1$ is connected to the gate of a transistor in the second stage). This coupling can lead to different modes of oscillation (in-phase or out-of-phase), but the fundamental frequency remains tied to the LC resonance.\n\n### Estimation of the Oscillation Frequency\nSince no specific numerical values for the inductance ($L$) or capacitance ($C$) are provided, the oscillation frequency $f$ is estimated using the standard formula for an LC oscillator:\n\n$$f \\approx \\frac{1}{2\\pi\\sqrt{L \\cdot C_{\\text{total}}}}$$\n\nWhere:\n*   **$L$** is the inductance of the coils shown in the figure.\n*   **$C_{\\text{total}}$** is the total equivalent capacitance at the tank nodes (e.g., at node $X_1$). This includes:\n    *   The **drain-to-bulk capacitance** ($C_{db}$) of the transistors connected to the node.\n    *   The **gate-to-source capacitance** ($C_{gs}$) of the transistors whose gates are driven by that node.\n    *   Any other parasitic capacitances from the interconnects.\n\n### Summary\nThe oscillation frequency is approximately:\n$$f = \\frac{1}{2\\pi\\sqrt{L C_{\\text{total}}}}$$\nIn a practical design, $C_{\\text{total}}$ is dominated by the MOSFET parasitic capacitances, and the frequency is typically in the **RF (Radio Frequency) or microwave range** (MHz to GHz), depending on the size of the inductors and the technology node of the transistors.",
        "format": "markdown",
        "sha256": "7c360a52f14593835c2e2e4b90b463383da65d54d76297cdf2c0402f7e3f8c71"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly gives the uncoupled LC tank frequency, but misses the central coupling-induced shift, approximately Δω = αω₀/(2Q). The final estimate therefore omits an important part of the oscillation frequency.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3224,
        "total_tokens": 3519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2681,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3224,
        "total_tokens": 3519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2681,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
